Relationships between thermic effect of food, insulin resistance and autonomic nervous activity.

Science.gov (United States)

Watanabe, Tomonori; Nomura, Masahiro; Nakayasu, Kimiko; Kawano, Tomohito; Ito, Susumu; Nakaya, Yutaka

2006-02-01

The thermic effect of food (TEF) is higher in lean than in obese human subjects. Relationships between TEF and insulin resistance during meals, from the point of view of autonomic nervous activity, were evaluated. Autonomic nervous activity was evaluated in 20 young adults using the spectral analysis of heart rate variability from one hour before to two hours after a meal. Heart rate data were analyzed based on low frequency components (LF power, 0.04-0.15 Hz), high frequency components (HF power, 0.15-0.40 Hz), and LF/HF ratios. Energy expenditure and the TEF were measured 30 min after a meal. Homeostasis model of insulin resistance index (HOMA-IR) was also measured. The LF/HF ratio was significantly increased 30 min after a meal (pinsulin sensitivity induces a poor response of sympathetic nervous activity in the postprandial phase and a reduction in postprandial energy expenditure.

PcMtr, an aromatic and neutral aliphatic amino acid permease of Penicillium chrysogenum

NARCIS (Netherlands)

Trip, H; Evers, ME; Driessen, AJM

2004-01-01

The gene encoding an aromatic and neutral aliphatic amino acid permease of Penicillium chrysogenum was cloned, functionally expressed and characterized in Saccharomyces cerevisiae M4276. The permease, designated PcMtr, is structurally and functionally homologous to Mtr of Neurospora crassa, and

Mtr Extracellular Electron Transfer Pathways in Fe(III)-reducing or Fe(II)-oxidizing Bacteria: A Genomic Perspective

Energy Technology Data Exchange (ETDEWEB)

Shi, Liang; Rosso, Kevin M.; Zachara, John M.; Fredrickson, Jim K.

2012-12-01

Originally discovered in the dissimilatory metal-reducing bacterium Shewanella oneidensis MR-1 (MR-1), the Mtr (i.e., metal-reducing) pathway exists in all characterized strains of metal-reducing Shewanella. The protein components identified to date for the Mtr pathway of MR-1 include four multi-heme c-type cytochromes (c-Cyts), CymA, MtrA, MtrC and OmcA, and a porin-like, outer membrane protein MtrB. They are strategically positioned along the width of the MR-1 cell envelope to mediate electron transfer from the quinone/quinol pool in the inner-membrane to the Fe(III)-containing minerals external to the bacterial cells. A survey of microbial genomes revealed homologues of the Mtr pathway in other dissimilatory Fe(III)-reducing bacteria, including Aeromonas hydrophila, Ferrimonas balearica and Rhodoferax ferrireducens, and in the Fe(II)-oxidizing bacteria Dechloromonas aromatica RCB, Gallionella capsiferriformans ES-2 and Sideroxydans lithotrophicus ES-1. The widespread distribution of Mtr pathways in Fe(III)-reducing or Fe(II)-oxidizing bacteria emphasizes the importance of this type of extracellular electron transfer pathway in microbial redox transformation of Fe. Their distribution in these two different functional groups of bacteria also emphasizes the bi-directional nature of electron transfer reactions carried out by the Mtr pathways. The characteristics of the Mtr pathways may be shared by other pathways used by microorganisms for exchanging electrons with their extracellular environments.

Establishing a LEU MTR fuel manufacturing facility in South Africa

International Nuclear Information System (INIS)

Jamie, R.W.; Kocher, A.

2010-01-01

The South African MTR Fuel Manufacturing Facility was established in the 1970's to supply SAFARI-1 with Fuel Elements and Control Rods. South African capability was developed in parallel with the uranium enrichment program to meet the needs of the Reactor. Further to the July 2005 decision by the South African Governmnent to convert both SAFARI-1 and the Fuel Plant to LEU, the SAFARI-1 phase has been successfully completed and Necsa has commenced with the conversion of the MTR Fuel Manufacturing Facility. In order to establish, validate and qualify the facility, Necsa has entered into a co-operation and technology transfer agreement with AREVA CERCA, the French manufacturer of Research Reactor fuel elements. Past experiences, conversion challenges and the status of the MTR Fuel Facility Project are discussed. On-going co-operation with AREVA CERCA to implement the local manufacture of LEU fuel is explained and elaborated on. (author)

MTR fuel element burn-up measurements by the reactivity method

International Nuclear Information System (INIS)

Zuniga, A.; Cuya, T.R.; Ravnik, M.

2003-01-01

Fuel element burn-up was measured by the reactivity method in the 10 MW Peruvian MTR reactor RP-10. The main purpose of the experiment was testing the reactivity method for an MTR reactor as the reactivity method was originally developed for TRIGA reactors. The reactivity worth of each measured fuel element was measured in its original core position in order to measure the burn-up of the fuel elements that were part of the experimental core. The burn-up of each measured fuel element was derived by interpolating its reactivity worth from the reactivity worth of two reference fuel elements of known burn-up, whose reactivity worth was measured in the position of the measured fuel element. The accuracy of the method was improved by separating the reactivity effect of burn-up from the effect of the position in the core. The results of the experiment showed that the modified reactivity method for fuel element burn-up determination could be applied also to MTR reactors. (orig.)

MTR loop at the MPR-GA. Siwabessy reactor of Serpong Indonesia for testing of LEU fuel

International Nuclear Information System (INIS)

Arbie, B.; Sunaryadi, D.; Supadi, S.

1991-01-01

The main objective of the MTR-Loop is for testing the specimens of MTR fuel element uprated conditions with respect to the normal conditions of the reactor fuel elements. It is intended to verify the suitability of the fuel elements for operation in a research reactor under preset temperature and pressure conditions. The most important part of the MTR loop is the test section. The fuel elements to be tested are positioned in the test section. For heat removal there is a cooling water flowing through the test section. On this paper the description of the MTR-Loop is described. Installation of the MTR-Loop will be performed in the middle of 1990. In order to facilitate the investigation of fuel behaviour and performance of the new fuel elements the supporting facilities are also already available in the RSG-GAS. (orig.)

Flow inversion and natural convection in a MTR (Materials Testing Reactor)

International Nuclear Information System (INIS)

Gimenez, M.O.; Clausse, A.

1990-01-01

The thermohydraulic evolution of a refrigerating channel of the MTR (Materials Testing Reactors) RA-6 reactor's core, at the Bariloche Atomic Center, has been studied during the transient caused by the primary system's pump decommissioning. This transient constitutes one of the reactor's operating power boundaries due to the maximum temperature permissible in fuel plates. The problem regarding the thermohydraulic code altered for the rectangular geometry calculation characteristic of the MTR design is analyzed. (Author) [es

Effect of Core Configurations on Burn-Up Calculations For MTR Type Reactors

International Nuclear Information System (INIS)

Hussein, H.M.; Sakr, A.M.; Amin, E.H.

2011-01-01

Three-dimensional burn-up calculations of MTR-type research reactor were performed using different patterns of control rods , to examine their effect on power density and neutron flux distributions throughout the entire core and on the local burn-up distribution. Calculations were performed using the computer codes' package M TR P C system , using the cell calculation transport code WIMS-D4 and the core calculation diffusion code CITVAP. A depletion study was done and the effects on the reactor fuel were studied, then an empirical formula was generated for every fuel element type, to correlate irradiation to burn-up percentage. Keywords: Neutronic Calculations, Burn-Up, MTR-Type Research Reactors, MTR P C Package, Empirical Formula For Fuel Burn-Up.

Considerations on thermic and mechanic processes that appear when 3D printing using ABS fused deposition modelling technology

Science.gov (United States)

Amza, Catalin Gheorghe; Niţoi, Dan Florin

2018-02-01

3D printers are of recent history, but with an extremely rapid evolution both in technology and hardware involved. At present excellent performances are reached in applications such as 3D printing of various Acrylonitrile butadiene styrene (ABS) plastic parts for house building using Fused Deposition Modelling technology. Nevertheless, the thermic and mechanic processes that appear when manufacturing such plastic components are quite complex. This aspect is very important, especially when one wants to optimize the manufacturing of parts with certain geometrical complexity. The Finite Element Analysis/Modelling (FEA/FEM) is among the few methods that can study the thermic transfer processes and shape modifications that can appear due to non-seamar behavior that takes place when the ABS plastic material is cooling down. The current papers present such an analysis when simulating the deposition of several strings of materials. A thermic analysis is made followed by a study of deformations that appear when the structure cools down.

Planning a new research reactor for AECL: The MAPLE-MTR concept

International Nuclear Information System (INIS)

Lee, A.G.; Lidstone, R.F.; Donnelly, J.V.

1992-01-01

AECL Research is assessing its needs and options for future irradiation research facilities. A planning team has been assembled to identify the irradiation requirements for AECL's research programs and compile options for satisfying the irradiation requirements. The planning team is formulating a set of criteria to evaluate the options and will recommend a plan for developing an appropriate research facility. Developing the MAPLE Materials Test Reactor (MAPLE-MTR) concept to satisfy AECL's irradiation requirements is one option under consideration by the planning team. AECL is undertaking this planning phase because the NRU reactor is 35 years old and many components are nearing the end of their design life. This reactor has been a versatile facility for proof testing CANDU components and fuel designs because the CANDU irradiation environment was simulated quite well. However, the CANDU design has matured and the irradiation requirements have changed. Future research programs will emphasize testing CANDU components near or beyond their design limits. To provide these irradiation conditions, the NRU reactor needs to be upgraded. Upgrading and refurbishing the NRU reactor is being considered, but the potentially large costs and regulatory uncertainties make this option very challenging. AECL is also developing the MAPLE-MTR concept as a potential replacement for the NRU reactor. The MAPLE-MTR concept starts from the recent MAPLE-X10 design and licensing experience and adapts this technology to satisfy the primary irradiation requirements of AECL's research programs. This approach should enable AECL to minimize the need for major advances in nuclear technology (e.g., fuel design, heat transfer). The preliminary considerations for developing the MAPLE-MTR concept are presented in this report. A summary of AECL's research programs is presented along with their irradiation requirements. This is followed by a description of safety criteria that need to be taken into

L-Area STS MTR/NRU/NRX Grapple Assembly Closure Mechanics Review

International Nuclear Information System (INIS)

Huizenga, D. J.

2016-01-01

A review of the closure mechanics associated with the Shielded Transfer System (STS) MTR/NRU/NRX grapple assembly utilized at the Savannah River Site (SRS) was performed. This review was prompted by an operational event which occurred at the Canadian Nuclear Laboratories (CNL) utilizing a DTS-XL grapple assembly which is essentially identical to the STS MTR/NRU/NRX grapple assembly used at the SRS. The CNL operational event occurred when a NRU/NRX fuel basket containing spent nuclear fuel assemblies was inadvertently released by the DTS-XL grapple assembly during a transfer. The SM review of the STS MTR/NRU/NRX grapple assembly will examine the operational aspects of the STS and the engineered features of the STS which prevent such an event at the SRS. The design requirements for the STS NRU/NRX modifications and the overall layout of the STS are provided in other documents.

Reconstruction of Extracellular Respiratory Pathways for Iron(III Reduction in Shewanella oneidensis strain MR-1

Directory of Open Access Journals (Sweden)

Dan eCoursolle

2012-02-01

Full Text Available Shewanella oneidensis strain MR-1 is a facultative anaerobic bacterium capable of respiring a multitude of electron acceptors, many of which require the Mtr respiratory pathway. The core Mtr respiratory pathway includes a periplasmic c-type cytochrome (MtrA, an integral outer membrane β-barrel protein (MtrB and an outer membrane-anchored c-type cytochrome (MtrC. Together, these components facilitate transfer of electrons from the c-type cytochrome CymA in the cytoplasmic membrane to electron acceptors at and beyond the outer membrane. The genes encoding these core proteins have paralogs in the S. oneidensis genome (mtrB and mtrA each have four while mtrC has three and some of the paralogs of mtrC and mtrA are able to form functional Mtr complexes. We demonstrate that of the additional three mtrB paralogs found in the S. oneidensis genome, only MtrE can replace MtrB to form a functional respiratory pathway to soluble iron(III citrate. We also evaluate which mtrC / mtrA paralog pairs (a total of 12 combinations are able to form functional complexes with endogenous levels of mtrB paralog expression. Finally, we reconstruct all possible functional Mtr complexes and test them in a S. oneidensis mutant strain where all paralogs have been eliminated from the genome. We find that each combination tested with the exception of MtrA / MtrE / OmcA is able to reduce iron(III citrate at a level significantly above background. The results presented here have implications towards the evolution of anaerobic extracellular respiration in Shewanella and for future studies looking to increase the rates of substrate reduction for water treatment, bioremediation, or electricity production.

The Conserved Actinobacterial Two-Component System MtrAB Coordinates Chloramphenicol Production with Sporulation in Streptomyces venezuelae NRRL B-65442

Directory of Open Access Journals (Sweden)

Nicolle F. Som

2017-06-01

Full Text Available Streptomyces bacteria make numerous secondary metabolites, including half of all known antibiotics. Production of antibiotics is usually coordinated with the onset of sporulation but the cross regulation of these processes is not fully understood. This is important because most Streptomyces antibiotics are produced at low levels or not at all under laboratory conditions and this makes large scale production of these compounds very challenging. Here, we characterize the highly conserved actinobacterial two-component system MtrAB in the model organism Streptomyces venezuelae and provide evidence that it coordinates production of the antibiotic chloramphenicol with sporulation. MtrAB are known to coordinate DNA replication and cell division in Mycobacterium tuberculosis where TB-MtrA is essential for viability but MtrB is dispensable. We deleted mtrB in S. venezuelae and this resulted in a global shift in the metabolome, including constitutive, higher-level production of chloramphenicol. We found that chloramphenicol is detectable in the wild-type strain, but only at very low levels and only after it has sporulated. ChIP-seq showed that MtrA binds upstream of DNA replication and cell division genes and genes required for chloramphenicol production. dnaA, dnaN, oriC, and wblE (whiB1 are DNA binding targets for MtrA in both M. tuberculosis and S. venezuelae. Intriguingly, over-expression of TB-MtrA and gain of function TB- and Sv-MtrA proteins in S. venezuelae also switched on higher-level production of chloramphenicol. Given the conservation of MtrAB, these constructs might be useful tools for manipulating antibiotic production in other filamentous actinomycetes.

The effect of resistance exercise on the thermic effect of food.

Science.gov (United States)

Denzer, Charlene M; Young, John C

2003-09-01

The thermic effect of food (TEF) is the increment in energy expenditure above resting metabolic rate associated with the cost of absorption and processing of food for storage. Previous studies have shown that TEF is enhanced by aerobic endurance exercise of sufficient duration and intensity. The purpose of this study was to determine if a similar effect occurs with a single bout of resistance exercise (weightlifting). VO2 was measured in 9 healthy volunteers (3 males and 6 females) for 2 hours after ingestion of a 2760 kJ (660 kcal) carbohydrate meal with and without prior completion of a resistance training regimen (2 sets of 10 repetitions of 10 different exercises). The meal caused an immediate and persistent thermic effect in both the control and the exercise trial. Mean oxygen consumption over baseline increased 20% in the control trial and 34% in the exercise trial. TEF calculated from VO2 and RER (total area under the response curve above baseline) was 73% greater in the exercise trial compared with the control trial (159 +/- 18 vs. 92 +/- 14 KJ/2 hrs, p carbohydrate meal is enhanced following a single bout of resistance exercise.

Transportation of spent MTR fuels

Energy Technology Data Exchange (ETDEWEB)

Raisonnier, D.

1997-08-01

This paper gives an overview of the various aspects of MTR spent fuel transportation and provides in particular information about the on-going shipment of 4 spent fuel casks to the United States. Transnucleaire is a transport and Engineering Company created in 1963 at the request of the French Atomic Energy Commission. The company followed the growth of the world nuclear industry and has now six subsidiaries and affiliated companies established in countries with major nuclear programs.

Transportation of spent MTR fuels

International Nuclear Information System (INIS)

Raisonnier, D.

1997-01-01

This paper gives an overview of the various aspects of MTR spent fuel transportation and provides in particular information about the on-going shipment of 4 spent fuel casks to the United States. Transnucleaire is a transport and Engineering Company created in 1963 at the request of the French Atomic Energy Commission. The company followed the growth of the world nuclear industry and has now six subsidiaries and affiliated companies established in countries with major nuclear programs

Structure and Function of Neisseria gonorrhoeae MtrF Illuminates a Class of Antimetabolite Efflux Pumps

Directory of Open Access Journals (Sweden)

Chih-Chia Su

2015-04-01

Full Text Available Neisseria gonorrhoeae is an obligate human pathogen and the causative agent of the sexually transmitted disease gonorrhea. The control of this disease has been compromised by the increasing proportion of infections due to antibiotic-resistant strains, which are growing at an alarming rate. N. gonorrhoeae MtrF is an integral membrane protein that belongs to the AbgT family of transporters for which no structural information is available. Here, we describe the crystal structure of MtrF, revealing a dimeric molecule with architecture distinct from all other families of transporters. MtrF is a bowl-shaped dimer with a solvent-filled basin extending from the cytoplasm to halfway across the membrane bilayer. Each subunit of the transporter contains nine transmembrane helices and two hairpins, posing a plausible pathway for substrate transport. A combination of the crystal structure and biochemical functional assays suggests that MtrF is an antibiotic efflux pump mediating bacterial resistance to sulfonamide antimetabolite drugs.

High temperature ultrasonic sensor for fission gas characterization in MTR harsh environment

Directory of Open Access Journals (Sweden)

Gatsa O.

2018-01-01

In this paper, we present NBT thick film fabrication by screen printing, characterization of piezoelectric, dielectric properties and material parameters studies in dependence of temperature. Relatively high resistivity in the range of 1.1013 Ohm.cm for fabricated thick film is explained by Aurivillius structure in which a-and b-layers form perovskite structure between oxides of c-layer. Main results of this study are presented and discussed in terms of feasibility for an application to a new sensor device operating at high temperature level (400°. Piezoelectric parameters enhancement and loss reduction at elevated temperatures are envisaged to be optimized. Further sensor development and test in MTR are expected to be realized in the near future.

JHR. A high performance MTR under construction for a sustainable nuclear energy

International Nuclear Information System (INIS)

Iracane, Daniel; Cordier, Pierre-Yves

2009-01-01

The Access to an up-to-date Material Testing Reactor (MTR) is essential to support a sustainable nuclear energy, meeting industry and public needs, and keeping a high level of scientific expertise. This includes services to existing and coming reactor technologies for major stakes such as safety and competitiveness, lifetime management, operation optimization, development of innovative structural material and fuel required for future systems (innovative Gen III, Gen IV, fusion...), etc. The JHR copes with this context. Design phase has been completed by the end of 2005 and JHR is now under construction. Start of operation is scheduled in 2014. As a new MTR taking benefit of a large available worldwide experience, JHR offers new major experimental capability that will be presented. JHR will be operated within an international users' consortium that will guarantee effective and cost-effective operation. This innovative way to operate a MTR, as a user-facility for the benefit of industry and public bodies, will be presented. (author)

Experimental study for development of thermic lance cutting method

International Nuclear Information System (INIS)

Machida, N.; Katano, Y.; Kamiya, Y.

1988-01-01

A series of experiments on a thermic lance cutting method were carried out to obtain useful data for the practical application of this method to the dismantling of reinforced concrete. As a first step, a performance experiment was executed to study basic cutting performance relating to oxygen consumption, extent of bar loss and cutting speed, as well as by-products generated during cutting work such as powdered dust, gas, fumes and slag. An automated and remote-controlled cutting machine was then developed utilizing automated bar supply and ignition. This paper describes the result of these experiments. (author)

Detection of mutations in mtrR gene in quinolone resistant strains of N.gonorrhoeae isolated from India

Directory of Open Access Journals (Sweden)

S V Kulkarni

2015-01-01

Full Text Available Background and Objectives: Emergence of multi-drug resistant Neisseria gonorrhoeae resulting from new genetic mutation is a serious threat in controlling gonorrhea. This study was undertaken to identify and characterise mutations in the mtrR genes in N.gonorrhoeae isolates resistant to six different antibiotics in the quinolone group. Materials and Methods: The Minimum inhibitory concentrations (MIC of five quinolones for 64 N.gonorrhoeae isolates isolated during Jan 2007-Jun 2009 were determined by E-test method. Mutations in MtrR loci were examined by deoxyribonucleic acid (DNA sequencing. Results: The proportion of N.gonorrhoeae strains resistant to anti-microbials was 98.4% for norfloxacin and ofloxacin, 96.8% for enoxacin and ciprofloxacin, 95.3% for lomefloxacin. Thirty-one (48.4% strains showed mutation (single/multiple in mtrR gene. Ten different mutations were observed and Gly-45 → Asp, Tyr-105 → His being the most common observed mutation. Conclusion: This is the first report from India on quinolone resistance mutations in MtrRCDE efflux system in N.gonorrhoeae. In conclusion, the high level of resistance to quinolone and single or multiple mutations in mtrR gene could limit the drug choices for gonorrhoea.

Does Magnetization Transfer Ratio (MTR) contribute to the diagnosis and differential diagnosis of the dementias?

International Nuclear Information System (INIS)

Hentschel, F.; Kreis, M.; Damian, M.; Krumm, B.

2004-01-01

Purpose: The magnetization transfer ratio (MTR) is a MR-based neuroimaging procedure aiming at the quantification of the structural integrity of brain tissue. Its contribution to the differential diagnosis of dementias was examined and discussed in relation to the pathogenesis of age-related dementias. Materials and Methods: Sixty-one patients from a memory clinic were diagnosed by general physical and neuropsychiatric examination, and underwent neuropsychologic testing and neuroimaging using MRI. Their clinical diagnoses were based on standard operational research criteria. Additionally, the MTR in 10 defined regions of interest (ROI) was determined. This investigation was performed using a T1-weighted SE sequence. Average MTR values were determined in the individual ROI and their combinations and correlated with the age gender, cognitive impairment and clinical diagnosis. Sensitivity, specificity, positive and negative predictive value were determined, as well as the rate of correct classifications. Results: For cognitive healthy subjects, the MRT values correlate only mildly, though significantly, with age in the hippocampus and with gender in the dorsal corpus callosum. In contrast, the MTR in the frontal white matter correlates strongly and highly significantly with cognitive impairment in patients with dementia. The differential diagnostic assignment of Alzheimer's disease versus vascular dementia by MTR provides a correct classification of approximately 50% to 70%. PPV for no dementia vs. vascular dementia or the NPV for vascular vs. Alzheimer's disease are considerably higher exceeding 80%. For no dementia vs. Alzheimer's disease, the NPV was over 90%. (orig.)

Santa Cruz thermic plant islanding with local loads

Energy Technology Data Exchange (ETDEWEB)

Nascimento, A R [Light Servicos de Eletricidade SA, Rio de Janeiro, RJ (Brazil); Gomes, Paulo; Almeida, Paulo C. de [ELETROBRAS, Rio de Janeiro, RJ (Brazil); Sereno, Marcos G [FURNAS, Rio de Janeiro, RJ (Brazil)

1988-12-31

This work looks into the feasibility of implementing a scheme for the islanding of the Santa Cruz Thermic Plant ( Rio de janeiro State) with LIGHT`s (Electric power public utility) loads fed by the Santa Cruz-Jacarepagua trunk connection, considering presently-existing system problems relative to a significant frequency drop when a loss occurs of a large generation block and which causes the blockade scheme of the mentioned Plant to work, thus aggravating the frequency control still further. An analysis is made of such scheme implementation implications on the scheme for islanding a Santa Cruz 84 MW machine to provide supply to the auxiliary services of The Angra dos Reis nuclear plant presently existing in the system. 2 refs., 9 figs.

Irradiation of novel MTR fuel plates in BR2

International Nuclear Information System (INIS)

Verboomen, B.; Aoust, Th.; Beeckmans De Westmeerbeeck, A.; De Raedt, Ch.

2000-01-01

Since the end of 1999, novel MTR fuel plates with very high-density meat are being irradiated in BR2. The purpose of the irradiation is to investigate the behaviour of these fuel plates under very severe reactor operation conditions. The novel fuel plates are inserted in two standard six-tube BR2 fuel elements in the locations normally occupied by the standard outer fuel plates. The irradiation in BR2 was prepared by carrying out detailed neutron Monte Carlo calculations of the whole BR2 core containing the two experimental fuel elements for various positions in the reactor and for various azimuthal orientations of the fuel elements. Comparing the thus determined fission density levels and azimuthal profiles in the new MTR fuel plates irradiated in the various channels allowed the experimenters to choose the most appropriate BR2 channel and the most appropriate fuel element orientation. (author)

Alpine plant distribution and thermic vegetation indicator on Gloria summits in the central Greater Caucasus

International Nuclear Information System (INIS)

Gigauri, K.; Abdaladze, O.; Nakhutsrishvili, G

2016-01-01

The distribution of plant species within alpine areas is often directly related to climate or climate-influenced ecological factors. Responding to observed changes in plant species, cover and composition on the GLORIA summits in the Central Caucasus, an extensive setup of 1m * 1m permanent plots was established at the treeline-alpine zones and nival ecotone (between 2240 and 3024 m a.s.l.) on the main watershed range of the Central Greater Caucasus nearby the Cross Pass, Kazbegi region, Georgia. Recording was repeated in a representative selection of 64 quadrates in 2008. The local climatic factors - average soil T degree C and growing degree days (GDD) did not show significant increasing trends. For detection of climate warming we used two indices: thermic vegetation indicator S and thermophilization indicator D. They were varying along altitudinal and exposition gradients. The thermic vegetation indicator decrease in all monitoring summits. The abundance rank of the dominant and endemic species did not change during monitoring period. (author)

A lumped parameter core dynamics model for MTR type research reactors under natural convection regime

International Nuclear Information System (INIS)

Ardaneh, Kazem; Zaferanlouei, Salman

2013-01-01

Highlights: ► A model is presented to simulate the reactivity insertion transient in MTR reactors. ► Transient dynamics of IAEA 10 MW MTR type research reactor are evaluated. ► Maximum unprotected reactivity insertion for safe condition is calculated. ► The model predictions are validated with corresponding results in the literature. - Abstract: On the basis of lumped parameter modeling of both the kinetic and thermal–hydraulic effects, a reasonably accurate simplified model has been developed to predict the dynamic response of MTR reactors following to an unprotected reactivity insertion under natural convection regime. By this model the reactor transient behavior at a given initial steady-state can be solved by a set of ordinary differential equations. The model predictions have an acceptable consent with corresponding results of reactivity insertion transients analyzed in the literature. The inherent safety characteristics of MTR research reactors utilizing natural convection is clearly demonstrated by the expanded model. The safety margin of reactor operating is selected ONB condition and thereby the proposed model determines that any slight increase in the value of $0.73 for inserted reactivity will cause the maximum cladding surface temperature to exceed the ONB condition

A simple gamma spectrometry method for evaluating the burnup of MTR-type HEU fuel elements

Energy Technology Data Exchange (ETDEWEB)

Makmal, T. [The Unit of Nuclear Engineering, Ben-Gurion University of The Negev, Beer-Sheva 84105 (Israel); Nuclear Physics and Engineering Division, Soreq Nuclear Research Center, Yavne 81800 (Israel); Aviv, O. [Radiation Safety Division, Soreq Nuclear Research Center, Yavne 81800 (Israel); Gilad, E., E-mail: gilade@bgu.ac.il [The Unit of Nuclear Engineering, Ben-Gurion University of The Negev, Beer-Sheva 84105 (Israel)

2016-10-21

A simple method for the evaluation of the burnup of a materials testing reactor (MTR) fuel element by gamma spectrometry is presented. The method was applied to a highly enriched uranium MTR nuclear fuel element that was irradiated in a 5 MW pool-type research reactor for a total period of 34 years. The experimental approach is based on in-situ measurements of the MTR fuel element in the reactor pool by a portable high-purity germanium detector located in a gamma cell. To corroborate the method, analytical calculations (based on the irradiation history of the fuel element) and computer simulations using a dedicated fuel cycle burnup code ORIGEN2 were performed. The burnup of the MTR fuel element was found to be 52.4±8.8%, which is in good agreement with the analytical calculations and the computer simulations. The method presented here is suitable for research reactors with either a regular or an irregular irradiation regime and for reactors with limited infrastructure and/or resources. In addition, its simplicity and the enhanced safety it confers may render this method suitable for IAEA inspectors in fuel element burnup assessments during on-site inspections. - Highlights: • Simple, inexpensive, safe and flexible experimental setup that can be quickly deployed. • Experimental results are thoroughly corroborated against ORIGEN2 burnup code. • Experimental uncertainty of 9% and 5% deviation between measurements and simulations. • Very high burnup MTR fuel element is examined, with 60% depletion of {sup 235}U. • Impact of highly irregular irradiation regime on burnup evaluation is studied.

Solid thermoluminescent dosemeter of sodium tetraborate and brazilian fluorite sensible to thermic neutrons

International Nuclear Information System (INIS)

Fratin, L.; Cruz, M.T. da

1987-01-01

The production of solid thermoluminescent dosemeters sensible to thermic neutrons is described. The stages of the production are described: vitrification of sodium tetraborate, mixture and cold pressing, syntherization. The obtention of a CaF 2 : natural dosemeter with NaCl which presents sensibility to gamma radiation similar to CaF 2 : natural dosemeter with Na 2 B 4 O 7 is studied. (M.A.C.) [pt

Uranium tetrafluoride reduction closed bomb. Part I: Reduction process general conditions

International Nuclear Information System (INIS)

Anca Abati, R.; Lopez Rodriguez, M.

1961-01-01

General conditions about the metallo thermic reduction in small bombs (250 and 800 gr. of uranium) has been investigated. Factors such as kind and granulometry of the magnesium used, magnesium excess and preheating temperature, which affect yields and metal quality have been considered. magnesium excess increased yields in a 15% in the small bomb, about the preheating temperature, there is a range between which yields and metal quality does not change. All tests have been made with graphite linings. (Author) 18 refs

Impaired glucose-induced thermogenesis and arterial norepinephrine response persist after weight reduction in obese humans

DEFF Research Database (Denmark)

Astrup, A; Andersen, T; Christensen, N J

1990-01-01

A reduced thermic response and an impaired activation of the sympathetic nervous system (SNS) has been reported after oral glucose in human obesity. It is, however, not known whether the reduced SNS activity returns to normal along with weight reduction. The thermic effect of glucose was lower...... in eight obese patients than in matched control subjects (1.7% vs 9.2%, p less than 0.002). The increase in arterial norepinephrine after glucose was also blunted in the obese patients. After a 30-kg weight loss their glucose and lipid profiles were markedly improved but the thermic effect of glucose...... was still lower than that of the control subjects (4.2%, p less than 0.001). The glucose-induced arterial norepinephrine response remained diminished in the reduced obese patients whereas the changes in plasma epinephrine were similar in all three groups. The results suggest that a defective SNS may...

Control of gdhR Expression in Neisseria gonorrhoeae via Autoregulation and a Master Repressor (MtrR of a Drug Efflux Pump Operon

Directory of Open Access Journals (Sweden)

Corinne E. Rouquette-Loughlin

2017-04-01

Full Text Available The MtrCDE efflux pump of Neisseria gonorrhoeae contributes to gonococcal resistance to a number of antibiotics used previously or currently in treatment of gonorrhea, as well as to host-derived antimicrobials that participate in innate defense. Overexpression of the MtrCDE efflux pump increases gonococcal survival and fitness during experimental lower genital tract infection of female mice. Transcription of mtrCDE can be repressed by the DNA-binding protein MtrR, which also acts as a global regulator of genes involved in important metabolic, physiologic, or regulatory processes. Here, we investigated whether a gene downstream of mtrCDE, previously annotated gdhR in Neisseria meningitidis, is a target for regulation by MtrR. In meningococci, GdhR serves as a regulator of genes involved in glucose catabolism, amino acid transport, and biosynthesis, including gdhA, which encodes an l-glutamate dehydrogenase and is located next to gdhR but is transcriptionally divergent. We report here that in N. gonorrhoeae, expression of gdhR is subject to autoregulation by GdhR and direct repression by MtrR. Importantly, loss of GdhR significantly increased gonococcal fitness compared to a complemented mutant strain during experimental murine infection. Interestingly, loss of GdhR did not influence expression of gdhA, as reported for meningococci. This variance is most likely due to differences in promoter localization and utilization between gonococci and meningococci. We propose that transcriptional control of gonococcal genes through the action of MtrR and GdhR contributes to fitness of N. gonorrhoeae during infection.

Relationships between thermic effect of food, insulin resistance and autonomic nervous activity

OpenAIRE

Watanabe, Tomonori; Nomura, Masahiro; Nakayasu, Kimiko; Kawano, Tomohito; Ito, Susumu; Nakaya, Yutaka

2006-01-01

Background: The thermic effect of food (TEF) is higher in lean than in obese human subjects. Objective: Relationships between TEF and insulin resistance during meals, from the point of view of autonomic nervous activity, were evaluated. Methods : Autonomic nervous activity was evaluated in 20 young adults using the spectral analysis of heart rate variability from one hour before to two hours after a meal. Heart rate data were analyzed based on low frequency components (LF power, 0.04 - 0.15Hz...

New options to fuel plate for MTR reactor

International Nuclear Information System (INIS)

Macedo, C.R.

1988-01-01

The main datas of fuel elements and the new materials for good performance of the MTR reactor are described. A study to verify the possibility of introduction a new element on the alloy is presented. After verification the stages of nucleus fabrication with dispersion cermets of uranium oxide is gave a special emphasis to cermet fabrication of uranium-aluminium alloys. (C.G.C.) [pt

New high density MTR fuel. The CEA-CERCA-COGEMA development program

International Nuclear Information System (INIS)

Languille, A.; Durand, J.P.; Gay, A.

1999-01-01

The development of a new generation of LEU, high in density and with reprocessing capacities MTR fuel, is a key issue to provide reactor operators with a smooth operation which is necessary for a long term development of Nuclear Energy. In the RRFM'98 meeting, a joint contribution of CEA, CERCA and COGEMA presented a technical classification of the potential candidates uranium alloys. In this paper this MTR working group presents the development program of a new high density fuel. This program is composed of three main steps: Basic Data analysis and collection, Plate Tests (Irradiation and Post Irradiation Examinations) and Lead Test Assemblies (Irradiation and Post Irradiation Examinations). The goal to be reached is to make this new fuel available before the end of the present US return policy. (author)

Structure and reconstitution of yeast Mpp6-nuclear exosome complexes reveals that Mpp6 stimulates RNA decay and recruits the Mtr4 helicase

Energy Technology Data Exchange (ETDEWEB)

Wasmuth, Elizabeth V. [Structural Biology Program, Sloan Kettering Institute, Memorial Sloan Kettering Cancer Center, New York, United States; Zinder, John C. [Structural Biology Program, Sloan Kettering Institute, Memorial Sloan Kettering Cancer Center, New York, United States; Tri-Institutional Training Program in Chemical Biology, Memorial Sloan Kettering Cancer Center, New York, United States; Zattas, Dimitrios [Structural Biology Program, Sloan Kettering Institute, Memorial Sloan Kettering Cancer Center, New York, United States; Das, Mom [Structural Biology Program, Sloan Kettering Institute, Memorial Sloan Kettering Cancer Center, New York, United States; Lima, Christopher D. [Structural Biology Program, Sloan Kettering Institute, Memorial Sloan Kettering Cancer Center, New York, United States; Howard Hughes Medical Institute, Memorial Sloan Kettering Cancer Center, New York, United States

2017-07-25

Nuclear RNA exosomes catalyze a range of RNA processing and decay activities that are coordinated in part by cofactors, including Mpp6, Rrp47, and the Mtr4 RNA helicase. Mpp6 interacts with the nine-subunit exosome core, while Rrp47 stabilizes the exoribonuclease Rrp6 and recruits Mtr4, but it is less clear if these cofactors work together. Using biochemistry with Saccharomyces cerevisiae proteins, we show that Rrp47 and Mpp6 stimulate exosome-mediated RNA decay, albeit with unique dependencies on elements within the nuclear exosome. Mpp6-exosomes can recruit Mtr4, while Mpp6 and Rrp47 each contribute to Mtr4-dependent RNA decay, with maximal Mtr4-dependent decay observed with both cofactors. The 3.3 Å structure of a twelve-subunit nuclear Mpp6 exosome bound to RNA shows the central region of Mpp6 bound to the exosome core, positioning its Mtr4 recruitment domain next to Rrp6 and the exosome central channel. Genetic analysis reveals interactions that are largely consistent with our model.

Thermic solar plants for the production of electricity in Mexico: present and future

International Nuclear Information System (INIS)

Almanza, R.

1990-01-01

During the last decade, there are have been some important achievements in generating electricity using solar concentrators. The Instituto de Ingenieria, of the Universidad Nacional Autonoma de Mexico (UNAM), has started the design and construction of solar thermic plants for generating electricity , capable of reaching 1 Kw and 10 Kw. The Instituto continues developing the research and testing of new materials, because this way of generating electricity has become economically feasible: besides, it constitutes a non polluting alternative. (Author)

Multi-target retrieval (MTR): the simultaneous retrieval of pressure, temperature and volume mixing ratio profiles from limb-scanning atmospheric measurements

International Nuclear Information System (INIS)

Dinelli, B.M.; Alpaslan, D.; Carlotti, M.; Magnani, L.; Ridolfi, M.

2004-01-01

In this paper we describe a retrieval approach for the simultaneous determination of the altitude distributions of p, T and VMR of atmospheric constituents from limb-scanning measurements of the atmosphere. This analysis method, named multi-target retrieval (MTR), has been designed and implemented in a computer code aimed at the analysis of MIPAS-ENVISAT observations; however, the concepts implemented in MTR have a general validity and can be extended to the analysis of all type of limb-scanning observations. In order to assess performance and advantages of the proposed approach, MTR has been compared with the sequential analysis system implemented by ESA as the level-2 processor for MIPAS measurements. The comparison has been performed on a common set of target species and spectral intervals. The performed tests have shown that MTR produces results of better quality than a sequential retrieval. However, the simultaneous retrieval of p, T and water VMR has not lead to satisfactory results below the tropopause, because of the high correlation occurring between p and water VMR in the troposphere. We have shown that this problem can be fixed extending the MTR analysis to at least one further target whose spectral features decouple the retrieval of pressure and water VMR. Ozone was found to be a suitable target for this purpose. The advantages of the MTR analysis system in terms of systematic errors have also been discussed

Antifoaming materials in G.S. (Girlder sulfide) heavy water plants. Thermical stability. Pt. 2

International Nuclear Information System (INIS)

Delfino, C.A.

1986-01-01

In Girlder sulfide (G.S.) heavy water plants hydrogen sulfide-water systems are inherentely foaming, so the adding of antifoaming materials is of great importance. These may be of high volatility, pyrolizable or chemically unstable in plant operation conditions (water and hydrogen sulfide at 2 MPa, up to 230 deg C). About twenty commercial surfactants were studied from the point of view of their thermical stability. (Author) [es

National fossil fuels consumption: Estimates of CO2 emissions and thermic pollution

International Nuclear Information System (INIS)

Mariani, Mario; Casale, Francesco

1997-01-01

The study on the basis of the national energy consumption from 1988 to 1994, estimates CO 2 emission rates produced by the most relevant hydrocarbons involved in the technological combustion processes and assess the potential thermic impact on the environment. Two calculation procedures have been developed taking into account once emission factors and other emission indexes in order to verify the two estimates. Besides, the work determines the national trend of CO 2 emission with regard to the aim for the stabilization of carbon dioxide emissions at 1990 levels by 2000

Charge and Levitation of Grains in Plasma Sheath with Dust Thermic Emission

International Nuclear Information System (INIS)

Wu Haicheng; Xie Baisong

2005-01-01

By taking into account thermic emission current from hot dust surface, the problem involved in dust charging and levitation of dust grains in plasma sheath has been researched. The results are compared to that without including thermal emission current while the system parameters are same. It is found that the thermal emission current has played a significant role on modifying the dust charging and balance levitations. Both of the charging numbers of dust and the dust radius in balance are dramatically reduced. The stability of dust levitation is also analyzed and discussed.

Cleaning oil refining drainage waters out of emulsified oil products with thermic treated cedar nut shell

Science.gov (United States)

Pyatanova, P. A.; Adeeva, L. N.

2017-08-01

It was elaborated the ability of the sorbent produced by thermic treatment of cedar nut shell to destruct model and real first kind (direct) emulsions in static and dynamic conditions. In static conditions optimal ratio sorbent-emulsion with the original concentration of oil products 800 mg/l was in the range of 2.0 g per 100 ml of emulsion which corresponds to the level of treatment 94.9%. The time of emulsion destruction was 40 minutes. This sorbent is highly active in dynamic processes of oil-contaminated water treatment, the level of treatment 96.0% is being achieved. Full dynamic sorptive capacity of the sorbent is 0.85 g/g. Sorbent based on the thermic treated cedar nut shell can be elaborated as sorptive filter element of local treatment facilities of oil refining and petrochemical processes. After the treatment with this sorbent of drainage waters of oil refinery in dynamic conditions the concentration of oil products became less than mpc on oil products for waste waters coming to biological treatment.

Statistic techniques of process control for MTR type

International Nuclear Information System (INIS)

Oliveira, F.S.; Ferrufino, F.B.J.; Santos, G.R.T.; Lima, R.M.

2002-01-01

This work aims at introducing some improvements on the fabrication of MTR type fuel plates, applying statistic techniques of process control. The work was divided into four single steps and their data were analyzed for: fabrication of U 3 O 8 fuel plates; fabrication of U 3 Si 2 fuel plates; rolling of small lots of fuel plates; applying statistic tools and standard specifications to perform a comparative study of these processes. (author)

Performance of the MTR core with MOX fuel using the MCNP4C2 code

International Nuclear Information System (INIS)

Shaaban, Ismail; Albarhoum, Mohamad

2016-01-01

The MCNP4C2 code was used to simulate the MTR-22 MW research reactor and perform the neutronic analysis for a new fuel namely: a MOX (U 3 O 8 &PuO 2 ) fuel dispersed in an Al matrix for One Neutronic Trap (ONT) and Three Neutronic Traps (TNTs) in its core. Its new characteristics were compared to its original characteristics based on the U 3 O 8 -Al fuel. Experimental data for the neutronic parameters including criticality relative to the MTR-22 MW reactor for the original U 3 O 8 -Al fuel at nominal power were used to validate the calculated values and were found acceptable. The achieved results seem to confirm that the use of MOX fuel in the MTR-22 MW will not degrade the safe operational conditions of the reactor. In addition, the use of MOX fuel in the MTR-22 MW core leads to reduce the uranium fuel enrichment with 235 U and the amount of loaded 235 U in the core by about 34.84% and 15.21% for the ONT and TNTs cases, respectively. - Highlights: • Re-cycling of the ETRR-2 reactor by MOX fuel. • Increase the number of the neutronic traps from one neutronic trap to three neutronic trap. • Calculation of the criticality safety and neutronic parameters of the ETRR-2 reactor for the U 3 O 8 -Al original fuel and the MOX fuel.

Crystal structure of the Neisseria gonorrhoeae MtrD inner membrane multidrug efflux pump.

Directory of Open Access Journals (Sweden)

Jani Reddy Bolla

Full Text Available Neisseria gonorrhoeae is an obligate human pathogen and the causative agent of the sexually-transmitted disease gonorrhea. The control of this disease has been compromised by the increasing proportion of infections due to antibiotic-resistant strains, which are growing at an alarming rate. The MtrCDE tripartite multidrug efflux pump, belonging to the hydrophobic and amphiphilic efflux resistance-nodulation-cell division (HAE-RND family, spans both the inner and outer membranes of N. gonorrhoeae and confers resistance to a variety of antibiotics and toxic compounds. We here report the crystal structure of the inner membrane MtrD multidrug efflux pump, which reveals a novel structural feature that is not found in other RND efflux pumps.

Effect of core configuration on the burnup calculations of MTR research reactors

International Nuclear Information System (INIS)

Hussein, H.M.; Amin, E.H.; Sakr, A.M.

2014-01-01

Highlights: • 3D burn-up calculations of MTR-type research reactor were performed. Examination of the effect of control rod pattern on power density and neutron flux distributions is presented. • The calculations are performed using the MTR P C package and the programs (WIMS and CITVAP). • An empirical formula was generated for every fuel element type, to correlate irradiation to burn-up. - Abstract: In the present paper, three-dimensional burn-up calculations were performed using different patterns of control rods, in order to examine their effect on power density and neutron flux distributions through out the entire core and hence on the local burn-up distribution. These different cores burn-up calculations are carried out for an operating cycle equivalent to 15 Full Power Days (FPDs), with a power rating of 22 MW. Calculations were performed using an example of a typical research reactor of MTR-type using the internationally known computer codes’ package “MTR P C system”, using the cell calculation transport code WIMS-D4 with 12 energy groups and the core calculation diffusion code CITVAP with 5 energy groups. A depletion study was done and the effects on the research reactor fuel (U-235) were performed. The burn-up percentage (B.U.%) curves for every fuel element type were drawn versus irradiation (MWD/TE). Then an empirical formula was generated for every fuel element type, to correlate irradiation to burn-up percentage. Charts of power density and neutron flux distribution for each core were plotted at different sections of each fuel element of the reactor core. Then a complete discussion and analysis of these curves are performed with comparison between the different core configurations, illustrating the effect of insertion or extraction of either of the four control rods directly on the neutron flux and consequently on the power distribution and burn-up. A detailed study of fuel burn-up gives detailed insight on the different B.U.% calculations

Re-qualification of MTR-type fuel plates fabrication process

International Nuclear Information System (INIS)

Elseaidy, I.M.; Ghoneim, M.M.

2010-01-01

The fabricability issues with increased uranium loading due to use low enrichment of uranium (LEU), i.e. less than 20 % of U 235 , increase the problems which occur during compact manufacturing, roll bonding of the fuel plates, potential difficulty in forming during rolling process, mechanical integrity of the core during fabrication, potential difficulty in meat homogeneity, and the ability to fabricate plates with thicker core as a means of increasing total uranium loading. To produce MTR- type fuel plates with high uranium loading (HUL) and keep the required quality of these plates, many of qualification process must be done in the commissioning step of fuel fabrication plant. After that any changing of the fabrication parameters, for example changing of any of the raw materials, devises, operators, and etc., a re- qualification process should be done in order to keep the quality of produced plates. Objective of the present work is the general description of the activities to be accomplished for re-qualification of manufacturing MTR- type nuclear fuel plates. For each process to be re-qualified, a detailed of re-qualification process were established. (author)

Understanding the role of multiheme cytochromes in iron(III) reduction and arsenic mobilization by Shewanella sp. ANA-3

Science.gov (United States)

Reyes, C.; Duenas, R.; Saltikov, C.

2006-12-01

The reduction of Fe (III) to Fe (II) and of arsenate (As (V)) to arsenite (As (III)) by Fe (III) reducing and As (V) respiring prokaryotes such as the bacterium Shewanella sp. ANA-3 may contribute to arsenic mobilization in aquifers contaminated with arsenic, specifically in places such as Bangladesh. Under oxic conditions As (V) predominates and is often adsorbed onto mineral surfaces such as amorphous ferrihydrite. However, under anoxic conditions As (III) predominates, sorbs to fewer minerals, and has a greater hydrologic mobility compared to As (V). The genetic mechanism underlying arsenic release from subsurface material most likely involves a combination of respiratory gene clusters (e.g. mtr/omc and arr). In this study, we are investigating the genetic pathways underlying arsenic mobilization. We have generated various mutations in the mtr/omc gene cluster, which encodes several outermembrane decaheme c-type cytochromes. Deletions in one mtr/omc gene did not eliminate iron reduction. However, strains carrying multiple gene deletions were greatly impaired in iron reduction abilities. Work is currently underway to generate combinations of iron reduction and arsenate reduction single and double mutants that will be used to investigate microbial mobilization of arsenic in flow-through columns containing As (V)-HFO coated sand. This work will address the importance of arsenate reduction and iron reduction in the mobilization of arsenic.

MTR core loading pattern optimization using burnup dependent group constants

Directory of Open Access Journals (Sweden)

Iqbal Masood

2008-01-01

Full Text Available A diffusion theory based MTR fuel management methodology has been developed for finding superior core loading patterns at any stage for MTR systems, keeping track of burnup of individual fuel assemblies throughout their history. It is based on using burnup dependent group constants obtained by the WIMS-D/4 computer code for standard fuel elements and control fuel elements. This methodology has been implemented in a computer program named BFMTR, which carries out detailed five group diffusion theory calculations using the CITATION code as a subroutine. The core-wide spatial flux and power profiles thus obtained are used for calculating the peak-to-average power and flux-ratios along with the available excess reactivity of the system. The fuel manager can use the BFMTR code for loading pattern optimization for maximizing the excess reactivity, keeping the peak-to-average power as well as flux-ratio within constraints. The results obtained by the BFMTR code have been found to be in good agreement with the corresponding experimental values for the equilibrium core of the Pakistan Research Reactor-1.

Application of reactivity method to MTR fuel burn-up measurement

International Nuclear Information System (INIS)

Zuniga, A.; Ravnik, M.; Cuya, R.

2001-01-01

Fuel element burn-up has been measured for the first time by reactivity method in a MTR reactor. The measurement was performed in RP-10 reactor of Peruvian Institute for Nuclear Energy (IPEN) in Lima. It is a pool type 10MW material testing reactor using standard 20% enriched uranium plate type fuel elements. A fresh element and an element with well defined burn-up were selected as reference elements. Several elements in the core were selected for burn-up measurement. Each of them was replaced in its original position by both reference elements. Change in excess reactivity was measured using control rod calibration curve. The burn-up reactivity worth of fuel elements was plotted as a function of their calculated burnup. Corrected burn-up values of the measured fuel elements were calculated using the fitting function at experimental reactivity for all elements. Good agreement between measured and calculated burn-up values was observed indicating that the reactivity method can be successfully applied also to MTR fuel element burn-up determination.(author)

Reactivity accident analysis in MTR cores

International Nuclear Information System (INIS)

Waldman, R.M.; Vertullo, A.C.

1987-01-01

The purpose of the present work is the analysis of reactivity transients in MTR cores with LEU and HEU fuels. The analysis includes the following aspects: the phenomenology of the principal events of the accident that takes place, when a reactivity of more than 1$ is inserted in a critical core in less than 1 second. The description of the accident that happened in the RA-2 critical facility in September 1983. The evaluation of the accident from different points of view: a) Theoretical and qualitative analysis; b) Paret Code calculations; c) Comparison with Spert I and Cabri experiments and with post-accident inspections. Differences between LEU and HEU RA-2 cores. (Author)

Studies of mixed HEU-LEU-MTR cores using 3D models

Energy Technology Data Exchange (ETDEWEB)

Haenggi, P.; Lehmann, E.; Hammer, J.; Christen, R. [Paul Scherrer Institute, Villigen (Switzerland)

1997-08-01

Several different core loadings were assembled at the SAPHIR research reactor in Switzerland combining the available types of MTR-type fuel elements, consisting mainly of both HEU and LEU fuel. Bearing in mind the well known problems which can occur in such configurations (especially power peaking), investigations have been carried out for each new loading with a 2D neutron transport code (BOXER). The axial effects were approximated by a global buckling value and therefore the radial effects could be studied in considerably detail. Some of the results were reported at earlier RERTR meetings and were compared to those obtained by other methods and with experimental values. For the explicit study of the third dimension of the core, another code (SILWER), which has been developed in PSI for LWR power plant cores, has been selected. With the help of an adapted model for the MTR-core of SAPHIR, several important questions have been addressed. Among other aspects, the estimation of the axial contribution to the hot channel factors, the influence of the control rod position and of the Xe-poisoning on the power distribution were studied. Special attention was given to a core position where a new element was assumed placed near a empty, water filled position. The comparison of elements of low and high enrichments at this position was made in terms of the induced power peaks, with explicit consideration of axial effects. The program SILWER has proven to be applicable to MTR-cores for the investigation of axial effects. For routine use as for the support of reactor operation, this 3D code is a good supplement to the standard 2D model.

Conceptual design of next generation MTR

Energy Technology Data Exchange (ETDEWEB)

Nagata, Hiroshi; Yamaura, Takayuki; Naka, Michihiro; Kawamata, Kazuo; Izumo, Hironobu; Hori, Naohiko; Nagao, Yoshiharu; Kusunoki, Tsuyoshi; Kaminaga, Masanori; Komori, Yoshihiro; Suzuki, Masahide; Kawamura, Hiroshi [Japan Atomic Energy Agency, Oarai Research and Development Center, Oarai, Ibaraki (Japan); Mine, M [Hitachi-GE Nuclear Energy, Ltd., Hitachi, Ibaraki (Japan); Yamazaki, S [Kawasaki Heavy Industries, Ltd., Kobe, Hyogo (Japan); Ishikawa, S [NGK Insulators, Ltd., Nagoya, Aichi (Japan); Miura, K [Sukegawa Electric Co., Ltd., Takahagi, Ibaraki (Japan); Nakashima, S [Fuji Electric Co., Ltd., Tokyo (Japan); Yamaguchi, K [Chiyoda Technol Corp., Tokyo (Japan)

2012-03-15

Conceptual design of the high-performance and low-cost next generation materials testing reactor (MTR) which will be expected to construct in the nuclear power plant introduction countries, started from 2010 in JAEA and nuclear-related companies in Japan. The aims of this conceptual design are to achieve highly safe reactor, economical design, high availability factor and advanced irradiation utilization. One of the basic reactor concept was determined as swimming pool type, thermal power of 10MW and water cooled and moderated reactor with plate type fuel element same as the JMTR. It is expected that the research reactors are used for human resource development, progress of the science and technology, expansion of industry use, lifetime extension of LWRs and so on. (author)

Thermic Attenuation on Concrete Sidewalk under Urban Trees. Case Study: Santa Marta – Colombia

OpenAIRE

Carlos Devia; Andrés Torres

2012-01-01

Background and Purpose: Urban trees provide a number of services including shade and thermal attenuation. This is related to morphological and physiological characteristics of trees and may vary between species and even between individuals of the same species. The aim of this work was to identify thermic attenuations on concrete sidewalks under six tropical urban trees with six different types of shadows. Material and Methods: In Santa Marta City, Colombia (10º12´20” N, 74º13´33” W, 10 met...

Immobilisation of MTR waste in cement (product evaluation). Final report. December 1987

International Nuclear Information System (INIS)

Howard, C.G.; Lee, D.J.

1988-01-01

The enriched uranium/aluminium fuel used in Material Testing Reactors is reprocessed at Dounreay Nuclear Power Development Establishment (DNE). The main chemical component of the liquid waste produced by this process is acid deficient aluminium nitrate. This is stored in stainless steel tanks at DNE. As a result of work carried out under the UKAEA radioactive waste management programme a decision was taken to immobilise the waste in cement. The programme had two main components, plant design and development of the cementation process. The plant for the cementation of MTR waste is under construction and will be commissioned in 1988/9. The primary objective of this project is to find a suitable process for changing the highly mobile radioactive waste into an inert stable solid. Work carried out on the development of the immobilisation process showed that a conditioning stage (neutralisation) is required to make the acid waste compatible with cement. Small scale experiments showed that adding Ordinary Portland Cement blended with ground granulated Blast Furnace Slag to Simulant MTR Liquor produces an acceptable product. The process has been demonstrated at full scale (200 litres) and the products have been subjected to an extensive programme of destructive and non-destructive testing. Specimens have been tested up to 1200 days after manufacture and show no significant signs of deterioration even when stored underwater or when subjected to freeze thaw cycling. Development work has also shown that the process can successfully immobilise simulant MTR liquor over a wide range of liquor concentrations. The programme therefore successfully produced a formulation that met all the requirements of both the process and product specification. (author)

High temperature ultrasonic sensor for fission gas characterization in MTR harsh environment

Science.gov (United States)

Gatsa, O.; Combette, P.; Rozenkrantz, E.; Fourmentel, D.; Destouches, C.; Ferrandis, J. Y. AD(; )

2018-01-01

device operating at high temperature level (400°). Piezoelectric parameters enhancement and loss reduction at elevated temperatures are envisaged to be optimized. Further sensor development and test in MTR are expected to be realized in the near future.

MTR fuel testing in BR2

International Nuclear Information System (INIS)

Jacquet, P.; Verwimp, A.; Wirix, S.

2000-01-01

New fuel design for MTR 's requires to be qualified under representative conditions, that is geometry, neutron spectrum, heat flux and thermo hydraulic conditions. An irradiation device for fuel plates has been designed to derive the maximum benefit from the BR2 irradiation capacities. The fuel plates can be easily extracted from their support during a shutdown to undergo additional tests. One of these tests is the measurement of the thickness changes along the fuel plate. To that purpose, a facility in the reactor water pool has been designed to measure the fuel swelling with an accuracy of 5 μm using inductive probes. At SCK-CEN, the full range of destructive and non-destructive PIE can be performed, including γ-scanning, wet sipping, surface examination and other methods. (author)

AAA-ATPase NVL2 acts on MTR4-exosome complex to dissociate the nucleolar protein WDR74

Energy Technology Data Exchange (ETDEWEB)

Hiraishi, Nobuhiro; Ishida, Yo-ichi; Nagahama, Masami, E-mail: nagahama@my-pharm.ac.jp

2015-11-20

Nuclear VCP-like 2 (NVL2) is a chaperone-like nucleolar ATPase of the AAA (ATPase associated with diverse cellular activities) family, which exhibits a high level of amino acid sequence similarity with the cytosolic AAA-ATPase VCP/p97. These proteins generally act on macromolecular complexes to stimulate energy-dependent release of their constituents. We previously showed that NVL2 interacts with RNA processing/degradation machinery containing an RNA helicase MTR4/DOB1 and an exonuclease complex, nuclear exosome, and involved in the biogenesis of 60S ribosomal subunits. These observations implicate NVL2 as a remodeling factor for the MTR4-exosome complex during the maturation of pre-ribosomal particles. Here, we used a proteomic screen and identified a WD repeat-containing protein 74 (WDR74) as a factor that specifically dissociates from this complex depending on the ATPase activity of NVL2. WDR74 shows weak amino acid sequence similarity with the yeast ribosome biogenesis protein Nsa1 and is co-localized with NVL2 in the nucleolus. Knockdown of WDR74 decreases 60S ribosome levels. Taken together, our results suggest that WDR74 is a novel regulatory protein of the MTR4-exsosome complex whose interaction is regulated by NVL2 and is involved in ribosome biogenesis. - Highlights: • WDR74 accumulates in MTR4-exosome complex upon expression of dominant-negative NVL2. • WDR74 is co-localized with NVL2 in the nucleolus. • WDR74, along with NVL2, is involved in the synthesis of 60S ribosomal subunits.

AAA-ATPase NVL2 acts on MTR4-exosome complex to dissociate the nucleolar protein WDR74

International Nuclear Information System (INIS)

Hiraishi, Nobuhiro; Ishida, Yo-ichi; Nagahama, Masami

2015-01-01

Nuclear VCP-like 2 (NVL2) is a chaperone-like nucleolar ATPase of the AAA (ATPase associated with diverse cellular activities) family, which exhibits a high level of amino acid sequence similarity with the cytosolic AAA-ATPase VCP/p97. These proteins generally act on macromolecular complexes to stimulate energy-dependent release of their constituents. We previously showed that NVL2 interacts with RNA processing/degradation machinery containing an RNA helicase MTR4/DOB1 and an exonuclease complex, nuclear exosome, and involved in the biogenesis of 60S ribosomal subunits. These observations implicate NVL2 as a remodeling factor for the MTR4-exosome complex during the maturation of pre-ribosomal particles. Here, we used a proteomic screen and identified a WD repeat-containing protein 74 (WDR74) as a factor that specifically dissociates from this complex depending on the ATPase activity of NVL2. WDR74 shows weak amino acid sequence similarity with the yeast ribosome biogenesis protein Nsa1 and is co-localized with NVL2 in the nucleolus. Knockdown of WDR74 decreases 60S ribosome levels. Taken together, our results suggest that WDR74 is a novel regulatory protein of the MTR4-exsosome complex whose interaction is regulated by NVL2 and is involved in ribosome biogenesis. - Highlights: • WDR74 accumulates in MTR4-exosome complex upon expression of dominant-negative NVL2. • WDR74 is co-localized with NVL2 in the nucleolus. • WDR74, along with NVL2, is involved in the synthesis of 60S ribosomal subunits.

Sharing the load: Mex67-Mtr2 cofunctions with Los1 in primary tRNA nuclear export.

Science.gov (United States)

Chatterjee, Kunal; Majumder, Shubhra; Wan, Yao; Shah, Vijay; Wu, Jingyan; Huang, Hsiao-Yun; Hopper, Anita K

2017-11-01

Eukaryotic transfer RNAs (tRNAs) are exported from the nucleus, their site of synthesis, to the cytoplasm, their site of function for protein synthesis. The evolutionarily conserved β-importin family member Los1 (Exportin-t) has been the only exporter known to execute nuclear export of newly transcribed intron-containing pre-tRNAs. Interestingly, LOS1 is unessential in all tested organisms. As tRNA nuclear export is essential, we previously interrogated the budding yeast proteome to identify candidates that function in tRNA nuclear export. Here, we provide molecular, genetic, cytological, and biochemical evidence that the Mex67-Mtr2 (TAP-p15) heterodimer, best characterized for its essential role in mRNA nuclear export, cofunctions with Los1 in tRNA nuclear export. Inactivation of Mex67 or Mtr2 leads to rapid accumulation of end-matured unspliced tRNAs in the nucleus. Remarkably, merely fivefold overexpression of Mex67-Mtr2 can substitute for Los1 in los1 Δ cells. Moreover, in vivo coimmunoprecipitation assays with tagged Mex67 document that the Mex67 binds tRNAs. Our data also show that tRNA exporters surprisingly exhibit differential tRNA substrate preferences. The existence of multiple tRNA exporters, each with different tRNA preferences, may indicate that the proteome can be regulated by tRNA nuclear export. Thus, our data show that Mex67-Mtr2 functions in primary nuclear export for a subset of yeast tRNAs. © 2017 Chatterjee et al.; Published by Cold Spring Harbor Laboratory Press.

In-vivo identification of direct electron transfer from Shewanella oneidensis MR-1 to electrodes via outer-membrane OmcA-MtrCAB protein complexes

Energy Technology Data Exchange (ETDEWEB)

Okamoto, Akihiro [Department of Applied Chemistry, School of Engineering, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan); Nakamura, Ryuhei, E-mail: nakamura@light.t.u-tokyo.ac.jp [Department of Applied Chemistry, School of Engineering, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan); Hashimoto, Kazuhito, E-mail: hashimoto@light.t.u-tokyo.ac.jp [Department of Applied Chemistry, School of Engineering, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan); ERATO/JST, HASHIMOTO Light Energy Conversion Project (Japan)

2011-06-30

Graphical abstract: . Display Omitted Highlights: > Monolayer biofilm of Shewanella cells was prepared on an ITO electrode. > Extracellular electron transfer (EET) process was examined with series of mutants. > Direct ET was confirmed with outer-membrane-bound OmcA-MtrCAB complex. > The EET process was not prominently influenced by capsular polysaccharide. - Abstract: The direct electron-transfer (DET) property of Shewanella bacteria has not been resolved in detail due to the complexity of in vivo electrochemistry in whole-cell systems. Here, we report the in vivo assignment of the redox signal indicative of the DET property in biofilms of Shewanella oneidensis MR-1 by cyclic voltammetry (CV) with a series of mutants and a chemical marking technique. The CV measurements of monolayer biofilms formed by deletion mutants of c-type cytochromes ({Delta}mtrA, {Delta}mtrB, {Delta}mtrC/{Delta}omcA, and {Delta}cymA), and pilin ({Delta}pilD), capsular polysaccharide ({Delta}SO3177) and menaquinone ({Delta}menD) biosynthetic proteins demonstrated that the electrochemical redox signal with a midpoint potential at 50 mV (vs. SHE) was due to an outer-membrane-bound OmcA-MtrCAB protein complex of decaheme cytochromes, and did not involve either inner-membrane-bound CymA protein or secreted menaquinone. Using the specific binding affinity of nitric monoxide for the heme groups of c-type cytochromes, we further confirmed this conclusion. The heterogeneous standard rate constant for the DET process was estimated to be 300 {+-} 10 s{sup -1}, which was two orders of magnitude higher than that previously reported for the electron shuttling process via riboflavin. Experiments using a mutant unable to produce capsular polysaccharide ({Delta}SO3177) revealed that the DET property of the OmcA-MtrCAB complex was not influenced by insulating and hydrophilic extracellular polysaccharide. Accordingly, under physiological conditions, S. oneidensis MR-1 utilizes a high density of outer

Sipping test on a failed MTR fuel element

International Nuclear Information System (INIS)

Terremoto, Luis Antonio Albiac; Zeituni, Carlos Alberto; Silva, Antonio Teixeira e; Perrotta, Jose Augusto; Silva, Jose Eduardo Rosa da

2002-01-01

This work describes sipping tests performed on MTR fuel elements of the IEA-R1 research reactor, in order to determinate which one failed in the core during a routine operation of the reactor. radioactive iodine isotopes 131 I and 133 I, employed as failure indicators, were detected in samples corresponding to the fuel element IEA-156. The specific activity of each sample, as well as the average leaking rate, were measured for 137 Cs. The nuclear fuels U 3 O 8 - Al dispersion and U - Al alloy were compared concerning their measured average leaking rates of 137 Cs. (author)

Successful completion of a time sensitive MTR and TRIGA Indonesian shipment

International Nuclear Information System (INIS)

Anne, Catherine; Patterson, John; Messick, Chuck

2005-01-01

Early this year, a shipment of 109 MTR fuel assemblies was received at the Department of Energy's Savannah River Site from the BATAN reactor in Serpong, Indonesia and another of 181 TRIGA fuel assemblies was received at the Idaho National Laboratory from the two BATAN Indonesian TRIGA reactors in Bandung and Yogyakarta, Indonesia. These were the first Other-Than- High-Income Countries shipments under the FRR program since the Spring 2001. The Global Threat Reduction Initiative announced by Secretary Abraham will require expeditious scheduling and extreme sensitivity to shipment security. The subject shipments demonstrated exceptional performance in both respects. Indonesian terrorist acts and 9/11 impacted the security requirements for the spent nuclear fuel shipments. Internal Indonesian security issues and an upcoming Indonesian election led to a request to perform the shipment with a very short schedule. Preliminary site assessments were performed in November 2003. The DOE awarded a task order to NAC for shipment performance just before Christmas 2003. The casks departed the US in January and the fuel elements were delivered at the DOE sites by the end of April 2004. The paper will present how the team completed a successful shipment in a timely manner. (author)

Ti-Zr sponge material structure, obtained in the course of magnesium-thermal reduction

Energy Technology Data Exchange (ETDEWEB)

Sandler, R A; Aleksandrovskii, S V; Likhterman, V A; Golubev, A A; Kuz' menko, A S

1975-09-01

The paper describes the structure of Ti-Zr sponge for which a magnesium-thermic reduction has been employed. The influence of zirconium upon the sponge porous structure has been studied. The general trend lies in the sponge porosity increase as the content of zirconium grows. However this role is manifested in smaller or larger degrees depending upon the effect of other factors.

Report on thermic effects in the study of the control and propagation of nuclear reactions

International Nuclear Information System (INIS)

Naudet, R.

It is very likely that nuclear reactions in natural reactors are governed by temperature, chiefly as a result of the moderation rate when the water density is altered. Since reactors operate under high pressure, with supercritical water, high temperatures (at least 350 to 400 0 C in some instances) are required in order to stabilize the reactors. Some typical calculations are shown in order to illustrate the changes in the control temperature during irradiation. The speed and, therefore, the duration of reactions is determined by the need to maintain the necessary temperature required for criticality, with heat dissipation conditions taken into account. Apparent measured durations are compatible with heat dissipation by simple conduction. However, it is likely that convection currents exist, and that their effects are superimposed on those of simple conduction. Reaction propagation must also be taken into consideration since criticality cannot be realized simultaneously at every point. The presence of impurities such as gadolinium or samarium in the mineral ore allows reactions to propagate in initially subcritical increments, through progressive breakdown of the impurities by means of neutronic diffusion. However, it has been shown that this phenomenon is seriously affected by thermic effects. Typical calculations are presented. Results clearly depend on temperature distribution hypotheses; sufficient thermic coupling can totally inhibit reaction propagation. It is concluded that, if convection currents are present, propagation is favored inversely with respect to the currents, and therefore a priori downstream of the reactors. 6 figures

Status of development and irradiation performance of advanced proliferation resistant MTR fuel at NUKEM

International Nuclear Information System (INIS)

Hrovat, M.; Hassel, H.-W.; Wehner, E.

1985-01-01

This paper describes the current status of development and irradiation performance of fuel elements for Material Test and Research (MTR) Reactors with Medium Enriched Uranium (MEU, ≤ 45 % 235-U) and Low Enriched Uranium (LEU, ≤ 20 % 235-U). (author)

Structural characterization of the principal mRNA-export factor Mex67–Mtr2 from Chaetomium thermophilum

Energy Technology Data Exchange (ETDEWEB)

Aibara, Shintaro; Valkov, Eugene; Lamers, Meindert H. [MRC Laboratory of Molecular Biology, Francis Crick Avenue, Cambridge Biomedical Campus, Cambridge CB2 0QH (United Kingdom); Dimitrova, Lyudmila; Hurt, Ed [Biochemie-Zentrum der Universität Heidelberg, Im Neuenheimer Feld 328, 69120 Heidelberg (Germany); Stewart, Murray, E-mail: ms@mrc-lmb.cam.ac.uk [MRC Laboratory of Molecular Biology, Francis Crick Avenue, Cambridge Biomedical Campus, Cambridge CB2 0QH (United Kingdom)

2015-06-27

The crystal structures of the individual domains of the Mex67–Mtr2 complex from C. thermophilum have been determined and their arrangement in solution has been studied by SAXS. Members of the Mex67–Mtr2/NXF–NXT1 family are the principal mediators of the nuclear export of mRNA. Mex67/NXF1 has a modular structure based on four domains (RRM, LRR, NTF2-like and UBA) that are thought to be present across species, although the level of sequence conservation between organisms, especially in lower eukaryotes, is low. Here, the crystal structures of these domains from the thermophilic fungus Chaetomium thermophilum are presented together with small-angle X-ray scattering (SAXS) and in vitro RNA-binding data that indicate that, not withstanding the limited sequence conservation between different NXF family members, the molecules retain similar structural and RNA-binding properties. Moreover, the resolution of crystal structures obtained with the C. thermophilum domains was often higher than that obtained previously and, when combined with solution and biochemical studies, provided insight into the structural organization, self-association and RNA-binding properties of Mex67–Mtr2 that facilitate mRNA nuclear export.

Structural characterization of the principal mRNA-export factor Mex67–Mtr2 from Chaetomium thermophilum

International Nuclear Information System (INIS)

Aibara, Shintaro; Valkov, Eugene; Lamers, Meindert H.; Dimitrova, Lyudmila; Hurt, Ed; Stewart, Murray

2015-01-01

The crystal structures of the individual domains of the Mex67–Mtr2 complex from C. thermophilum have been determined and their arrangement in solution has been studied by SAXS. Members of the Mex67–Mtr2/NXF–NXT1 family are the principal mediators of the nuclear export of mRNA. Mex67/NXF1 has a modular structure based on four domains (RRM, LRR, NTF2-like and UBA) that are thought to be present across species, although the level of sequence conservation between organisms, especially in lower eukaryotes, is low. Here, the crystal structures of these domains from the thermophilic fungus Chaetomium thermophilum are presented together with small-angle X-ray scattering (SAXS) and in vitro RNA-binding data that indicate that, not withstanding the limited sequence conservation between different NXF family members, the molecules retain similar structural and RNA-binding properties. Moreover, the resolution of crystal structures obtained with the C. thermophilum domains was often higher than that obtained previously and, when combined with solution and biochemical studies, provided insight into the structural organization, self-association and RNA-binding properties of Mex67–Mtr2 that facilitate mRNA nuclear export

Aspects of Energy Metabolism in Mangalitsa Pigs Exposed at Thermic Neutral Temperature

Directory of Open Access Journals (Sweden)

Monica Pârvu

2011-10-01

Full Text Available The studies aimed the energy metabolism determination in Mangalitsa pigs exposed at thermic neutral temperature, compared to Large White pigs. The experimental period was between 80 and 100 kg liveweight. The animals had free access to standard, isoprotein and isocalory diets, with 13.5% crude protein (CP and 3100 kcal/kg metabolizable energy. Feed intake was measured on a daily basis. The energy-protein balance was calculated on the basis of comparative slaughter made at the beginning and end of the experiment. The metabolizable energy (MEc was estimated by chemical analysis (feed and excreta using mathematical modelling and the Whittemore’s formula. The metabolizable energy utilization efficiency was 0.61 at Large White and 0.53 at Mangalitsa.

Corrosion behavior of spent MTR fuel elements in a drowned salt mine repository

International Nuclear Information System (INIS)

Brodda, B.G.; Fachinger, J.

1995-01-01

Spent MTR fuel from German Material Test Reactors will not be reprocessed, but stored in a final salt repository in the deep geologic underground. Fuel elements will be placed in POLLUX containers, which are assumed to resist the corrosive attack of an accidentally formed concentrated salt brine for about 500 years. After a container failure the brine would contact the fuel element, corrode the aluminum plating and possibly leach radionuclides from the fuel. A source term for the calculation of radionuclide mobilization results from the investigation of the behavior of MTR fuel in this scenario, which has to be considered for the long-term safety analysis of a deep mined rock salt repository. Experiments with the different plating materials show that the considered aluminum alloys will not resist the corrosive attack of a brine solution, especially in the presence of iron, under the conditions in a drowned salt mine repository. Although differences in the corrosion rates of about two orders of magnitude were observed when applying different parameter sets, the deterioration must be considered to be almost instantaneous in geological terms. Radionuclides are mobilized from irradiated MTR fuel, when the meat of the fuel element becomes accessible to the brine solution. It seems, however, that the radionuclides are effectively trapped by the aluminum hydroxide formed, as the activity concentrations in the brine solution soon reach a constant level with the progressing corrosion of the cladding aluminum. In the presence of iron a more significant initial release was observed, but also in this case an equilibrium activity seems to be reached as a consequence of radionuclide trapping

Quasistatic evolution of magnetoelastic plates via dimension reduction

Czech Academy of Sciences Publication Activity Database

Kružík, Martin; Stefanelli, U.; Zanini, Ch.

2015-01-01

Roč. 35, č. 12 (2015), s. 5999-6013 ISSN 1078-0947 R&D Projects: GA ČR GAP201/10/0357; GA ČR GA14-15264S Institutional support: RVO:67985556 Keywords : magnetoelasticity * energetic solution * existence * dimension reduction Subject RIV: BA - General Mathematics Impact factor: 1.127, year: 2015 http://library.utia.cas.cz/separaty/2015/MTR/kruzik-0444502.pdf

On Ti-Zr sponge material structure, obtained in the course of magnesium-thermal reduction

International Nuclear Information System (INIS)

Sandler, R.A.; Aleksandrovskij, S.V.; Likhterman, V.A.; Golubev, A.A.; Kuz'menko, A.S.

1975-01-01

The paper describes the structure of Ti-Zr sponge for which a magnesium-thermic reduction has been employed. The influence of zirconium upon the sponge porous structure has been studied. The general trend lies in the sponge porosity increase as the content of zirconium grows. However this role is manifested in a smaller or larger degrees depending upon the effect of other factors

Kinetics of magnesiothermic reduction of UF4 by DTA

International Nuclear Information System (INIS)

Raina, Amulya; Agarwal, Renu

2016-01-01

Uranium metal production for nuclear fuel is usually carried out by magnesio-thermic reduction of UF 4 (s). This is a highly exothermic reaction: UF 4 +2Mg → 2MgF 2 + U, ΔH r 298.15 K = -349 kJ/mol. The process is carried out by loading 1:2 molar ratio of UF 4 and Mg mixture in a large stainless steel vessel lined with insulating MgF 2 . This bomb reactor is heated to ~1023 K, but the reaction is known to start at lower temperature. The furnace heat and reaction heat results in shooting mixture temperature to >1800 K. Attaining such high temperatures is desired for complete segregation of fluoride slag (T m MgF 2 =1538 K) and uranium melt (T m =1406 K) due to large difference in their densities, 3.4 gm/cc and 17.9 gm/cc, respectively. For efficient and economic magnesio-thermic reduction of UF 4 , it is desired to understand heat distribution in the reactor vessel, which requires kinetic parameters of this reaction: activation energy (E α ) and A. As this is a solid-solid reaction, studying this reaction kinetics can be approximated by nonisothermal DTA analysis using different heating rates. For non-isothermal conditions, the heating rate (ϕ) = dT/dt is related to rate of propagation of reaction

Antifoaming materials studies in G.S. (Girlder sulfide) heavy water plants. Chemical and thermical stability. Pt. 3

International Nuclear Information System (INIS)

Delfino, C.A.; Rojo, E.A.

1988-01-01

In Girlder sulfide (G.S.) heavy water plants hydrogen sulfide-water systems are inherentely foaming, so the adding of antifoaming materials is of great importance. These may be of high volatility, pyrolizable or chemically unstable in plant operation conditions (water and hydrogen sulfide at 2 MPa, up to 230 deg C). Five commercial surfactants were studied from the point of view of their chemical and thermical stability in order to select the most suitable. (Author) [es

Establishment of an authenticated physical standard for gamma spectrometric determination of the U-235 content of MTR fuel and evaluation of measurement procedures

International Nuclear Information System (INIS)

Fleck, C.M.

1979-12-01

Measurements of U-235 content in a standard MTR fuel element were carried out, using scintillation and semi-conductor spectrometers. Three different types of measurement were carried out: a) Comparison of different primary standards among one another and with single fuel plates. b) Calibration of the MTR fuel element as an authenticated physical standard. c) Evaluation of over all errors in assay measurements on MTR fuel elements. The error of the whole assay measurement will be approximately 0.9%. The Uranium distribution in the single fuel plates is the original source of error. In the case of equal Uranium contents in all fuel plates of one fuel assembly, the error of assay measurements would be about 0.3% relative to the primary standards

Characterisation of the corrosion products of non-irradiated material test reactors fuel elements (MTR-FE)

Energy Technology Data Exchange (ETDEWEB)

Mazeina, L.; Curtius, H.; Fachinger, J. [Inst. for Safety Research and Reactor Technology, Research Centre Juelich (Germany)

2003-07-01

In a high concentrated Mg-rich brine a non-irradiated MTR-FE corroded. The formed corrosion products consists of an amorphous part and of hydrotalcites, which were identified as Mg-Al-hydrotalcites with chloride anions in the interlayer. (orig.)

The use of experimental data in an MTR-type nuclear reactor safety analysis

Science.gov (United States)

Day, Simon E.

Reactivity initiated accidents (RIAs) are a category of events required for research reactor safety analysis. A subset of this is unprotected RIAs in which mechanical systems or human intervention are not credited in the response of the system. Light-water cooled and moderated MTR-type ( i.e., aluminum-clad uranium plate fuel) reactors are self-limiting up to some reactivity insertion limit beyond which fuel damage occurs. This characteristic was studied in the Borax and Spert reactor tests of the 1950s and 1960s in the USA. This thesis considers the use of this experimental data in generic MTR-type reactor safety analysis. The approach presented herein is based on fundamental phenomenological understanding and uses correlations in the reactor test data with suitable account taken for differences in important system parameters. Specifically, a semi-empirical approach is used to quantify the relationship between the power, energy and temperature rise response of the system as well as parametric dependencies on void coefficient and the degree of subcooling. Secondary effects including the dependence on coolant flow are also examined. A rigorous curve fitting approach and error assessment is used to quantify the trends in the experimental data. In addition to the initial power burst stage of an unprotected transient, the longer term stability of the system is considered with a stylized treatment of characteristic power/temperature oscillations (chugging). A bridge from the HEU-based experimental data to the LEU fuel cycle is assessed and outlined based on existing simulation results presented in the literature. A cell-model based parametric study is included. The results are used to construct a practical safety analysis methodology for determining reactivity insertion safety limits for a light-water moderated and cooled MTR-type core.

The use of experimental data in an MTR-type nuclear reactor safety analysis

International Nuclear Information System (INIS)

Day, S.E.

2006-01-01

Reactivity initiated accidents (RIAs) are a category of events required for research reactor safety analysis. A subset of this is unprotected RIAs in which mechanical systems or human intervention are not credited in the response of the system. Light-water cooled and moderated MTR-type (i.e., aluminum-clad uranium plate fuel) reactors are self-limiting up to some reactivity insertion limit beyond which fuel damage occurs. This characteristic was studied in the Borax and Spert reactor tests of the 1950s and 1960s in the USA. This thesis considers the use of this experimental data in generic MTR-type reactor safety analysis. The approach presented herein is based on fundamental phenomenological understanding and uses correlations in the reactor test data with suitable account taken for differences in important system parameters. Specifically, a semi-empirical approach is used to quantify the relationship between the power, energy and temperature rise response of the system as well as parametric dependencies on void coefficient and the degree of subcooling. Secondary effects including the dependence on coolant flow are also examined. A rigorous curve fitting approach and error assessment is used to quantify the trends in the experimental data. In addition to the initial power burst stage of an unprotected transient, the longer term stability of the system is considered with a stylized treatment of characteristic power/temperature oscillations (chugging). A bridge from the HEU-based experimental data to the LEU fuel cycle is assessed and outlined based on existing simulation results presented in the literature. A cell-model based parametric study is included. The results are used to construct a practical safety analysis methodology for determining reactivity insertion safety limits for a light-water moderated and cooled MTR-type core. (author)

The use of experimental data in an MTR-type nuclear reactor safety analysis

Energy Technology Data Exchange (ETDEWEB)

Day, S.E

2006-07-01

Reactivity initiated accidents (RIAs) are a category of events required for research reactor safety analysis. A subset of this is unprotected RIAs in which mechanical systems or human intervention are not credited in the response of the system. Light-water cooled and moderated MTR-type (i.e., aluminum-clad uranium plate fuel) reactors are self-limiting up to some reactivity insertion limit beyond which fuel damage occurs. This characteristic was studied in the Borax and Spert reactor tests of the 1950s and 1960s in the USA. This thesis considers the use of this experimental data in generic MTR-type reactor safety analysis. The approach presented herein is based on fundamental phenomenological understanding and uses correlations in the reactor test data with suitable account taken for differences in important system parameters. Specifically, a semi-empirical approach is used to quantify the relationship between the power, energy and temperature rise response of the system as well as parametric dependencies on void coefficient and the degree of subcooling. Secondary effects including the dependence on coolant flow are also examined. A rigorous curve fitting approach and error assessment is used to quantify the trends in the experimental data. In addition to the initial power burst stage of an unprotected transient, the longer term stability of the system is considered with a stylized treatment of characteristic power/temperature oscillations (chugging). A bridge from the HEU-based experimental data to the LEU fuel cycle is assessed and outlined based on existing simulation results presented in the literature. A cell-model based parametric study is included. The results are used to construct a practical safety analysis methodology for determining reactivity insertion safety limits for a light-water moderated and cooled MTR-type core. (author)

Depletion Calculations for MTR Core Using MCNPX and Multi-Group Nodal Diffusion Methods

International Nuclear Information System (INIS)

Jaradata, Mustafa K.; Park, Chang Je; Lee, Byungchul

2013-01-01

In order to maintain a self-sustaining steady-state chain reaction, more fuel than is necessary in order to maintain a steady state chain reaction must be loaded. The introduction of this excess fuel increases the net multiplication capability of the system. In this paper MCNPX and multi-group nodal diffusion theory will be used for depletion calculations for MTR core. The eigenvalue and power distribution in the core will be compared for different burnup. Multi-group nodal diffusion theory with combination of NEWT-TRITON system was used to perform depletion calculations for 3Χ3 MTR core. 2G and 6G approximations were used and compared with MCNPX results for 2G approximation the maximum difference from MCNPX was 40 mk and for 6G approximation was 6 mk which is comparable to the MCNPX results. The calculated power using nodal code was almost the same MCNPX results. Finally the results of the multi-group nodal theory were acceptable and comparable to the calculated using MCNPX

Neutronic design of a 22 MW MTR type nuclear research reactor

International Nuclear Information System (INIS)

Khamis, I.; Khattab, K.; Soleman, I.; Ghazi, N.

2008-01-01

The neutronic design calculations of a 22 MW MTR type nuclear research reactor are conducted in this project. This reactor type is selected by the Arab Atomic Energy Commission in a cooperated project. The design calculations are conducted in two methods: The deterministic method, solving the neutron transport and diffusion equations using the WIMSD4 and the CITATION codes, and the probabilistic method using the MCNP code. Good agreements are noticed between the results of the multiplication factor and the neutron flux distribution which prove the accuracy of our models using the two methods. (authors)

Neutronic design of a 22 MW MTR type nuclear research reactor

International Nuclear Information System (INIS)

Khamis, I.; Khattab, K.; Soleman, I.; Ghazi, N.

2006-12-01

The neutronic design calculations of a 22 MW MTR type nuclear research reactor are conducted in this project. This reactor type is selected by the Arab Atomic Energy Commission in a cooperated project. The design calculations are conducted in two methods: The deterministic method, solving the neutron transport and diffusion equations using the WIMSD4 and the CITATION codes, and the probabilistic method using the MCNP code. Good agreements are noticed between the results of the multiplication factor and the neutron flux distribution which prove the accuracy of our models using the two methods. (author)

Decommissioning of the MTR-605 process water building at the Idaho National Engineering Laboratory. Final report

International Nuclear Information System (INIS)

Browder, J.H.; Wills, E.L.

1985-01-01

Decontamination and decommissioning (D and D) of the unused radioactively contaminated portions of the MTR-605 building at the Test Reactor Area of the Idaho National Engineering Laboratory has been completed; this final report describes the D and D project. The building is a two-story concrete structure that was used to house piping systems to channel and control coolant water flow for the Materials Testing Reactor (MTR), a 40 MW (thermal) light water test reactor that was operated from 1952 until 1970 and then deactivated. D and D project objectives were to reduce potential environmental and radioactive contamination hazards to levels as low a reasonably achievable. Primary tasks of the D and D project were: to remove contaminated piping (about 400 linear ft of 36- and 30-in.-dia stainless steel pipe) and valves from the primary coolant pipe tunnels, to remove a primary coolant pump and piping, and to remove the three 8-ft-dia by 25-ft-long evaporators from the building second floor

Immobilisation of MTR waste in cement (product evaluation). Annual report March 1985

International Nuclear Information System (INIS)

Howard, C.G.; Smith, D.L.G.; Williams, J.R.A.

1986-01-01

This report describes work performed at Winfrith under the UKAEA's research and development programme on radioactive waste management. The work carried out during April 1984 to March 1985 on the evaluation of laboratory and 200 dm 3 scale products of cemented MTR waste was sponsored by the Department of the Environment as part of radioactive waste management research programme. The results will be used in the formulation of Government policy but at this stage they do not necessarily represent Government policy. (author)

Immobilisation of MTR waste in cement (product evaluation)

International Nuclear Information System (INIS)

Howard, C.G.; Lee, D.J.

1988-01-01

The enriched uranium/aluminium fuel used in Material Testing Reactors is reprocessed at Dounreay Nuclear Power Development Establishment (DNE). The main chemical component of the liquid waste produced by this process is acid deficient aluminium nitrate. The primary objective of this project is to find a suitable process for changing the highly mobile radioactive waste into an inert stable solid. Work carried out on the development of the immobilisation process showed that a conditioning stage (neutralisation) is required to make the acid waste compatible with cement. Small scale experiments showed that adding Ordinary Portland Cement blended with ground granulated Blast Furnace Slag to Simulant MTR Liquor produces an acceptable product. The process has been demonstrated at full scale (200 litres) and the products have been subjected to an extensive programme of destructive and non-destructive testing. (author)

The THMIS-MTR observation of a active region filament

Science.gov (United States)

Zong, W. G.; Tang, Y. H.; Fang, C.

We present some THMIS-MTR observations of a active region filament on September 4, 2002. The full stokes parameters of the filament were obtained in Hα, CaII 8542 and FeI 6302. By use of the data with high spatial resolution(0.44" per pixel), we probed the fine structure of the filament and gave out the parameters at the barbs' endpoints, including intensity, velocity and longitudinal magnetic field. Comparing the quiescent filament which we have discussed before, we find that: 1)The velocities of the barbs' endpoints are much bigger in the active region filament, the values are more than one thousand meters per second. 2)The barbs' endpoints terminate at the low logitudinal magnetic field in the active region filament, too.

Uranium tetrafluoride reduction closed bomb. Part I: Reduction process general conditions; Reduccion del tetrafluoruro de uranio en bomba cerrada. Part I. estudio de las variables generales del proceso de reduccion

Energy Technology Data Exchange (ETDEWEB)

Anca Abati, R; Lopez Rodriguez, M

1961-07-01

General conditions about the metallo thermic reduction in small bombs (250 and 800 gr. of uranium) has been investigated. Factors such as kind and granulometry of the magnesium used, magnesium excess and preheating temperature, which affect yields and metal quality have been considered. magnesium excess increased yields in a 15% in the small bomb, about the preheating temperature, there is a range between which yields and metal quality does not change. All tests have been made with graphite linings. (Author) 18 refs.

OSIRIS, a MTR adapted and well fitted to LEU utilization qualification and development

International Nuclear Information System (INIS)

Barnier, M.; Beylot, J.P.

1984-01-01

The MTR OSIRIS has been successfully operated for 4 years using the ''Caramel'' low enriched uranium dioxyde fuel for the whole core loading. In the first part we examine the performance and operating experience obtained up to the present time with ''Caramel''. In a second part the paper discusses the results of the calculations for a complete OSIRIS core loaded with 20 % silicide fuel and makes a comparison with UAl 93 % and ''Caramel'' 7 % fuels. (author)

Neutronic calculations in core conversion of the IAN-R1 research reactor from MTR HEU to TRIGA LEU fuel

International Nuclear Information System (INIS)

Sarta Fuentes, Jose A.; Castiblanco, L.A.

2003-01-01

With cooperation of the International Atomic Energy Agency (IAEA), neutronic calculations were carried out for conversion of the Ian-R1 Reactor from MTR-HEU fuel to TRIGA-LEU fuel. In order to establish a staff for neutronic calculation at the Instituto de Cancan's Nucleares y Energia s Alternatives (INEA) a program was established. This program included training, acquisition of hardware, software and calculation for the core with MTR-HEU fuel , enriched nominally to 93% and calculation for several arrangements with the TRIGA-LEU fuel, enriched to 19.7%. The results were verified and compared with several groups of calculation at the Instituto Nacional de Investigaciones Nucleares (ININ) in Mexico, and General Atomics (GA) in United States. As a result of this program, several technical reports have been wrote. (author)

Chemometrics application in fuel's MTR type chemical characterization by X-ray fluorescence; Aplicacao da quimiometria para caracterizacao quimica de combustiveis tipo MTR por fluorescencia de raios-X

Energy Technology Data Exchange (ETDEWEB)

Silva, Clayton Pereira da

2012-07-01

In Brazil and worldwide the nuclear power has occupied a prominent position with many applications in industry, power generation, environment and medicine, improving the quality of tests and treatments, therefore people's lives. Uranium is the main element used in nuclear facilities and it s employed as base material to generation of electricity in the manufacture of radiopharmaceuticals. In the '50s, during the Cold War, the then newly created International Atomic Energy Agency proposed to oversee nuclear facilities and encourage the manufacture of nuclear fuels with low-enriched uranium (LEU) fuel came then type Material Test Reactor (MTR), manufactured initially in U{sub 3}O{sub 8} and U{sub 3}Si{sub 2} later, both dispersed in aluminum. The use of this technology requires a constant improvement of all processes involving the manufacture of MTR subject to several international protocols, which seek to ensure the reliability of the fuel from the standpoint of practical and environmental. In this context, the control of impurities, from the point of view of neutron economy, directly affects the quality of any nuclear fuel, so strict control is necessary. The literature has reported procedures which, beyond generating residues, are lengthy and costly, they need calibration curve and consequently reference materials. The aim of this work is to establish and validate a methodology for nondestructive quantitative chemical analysis, low cost and analysis time, as well as minimize the generation of waste, for multielement determination of major constituents (Utotal and Si) and impurities (B, Mg, Al, Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd and others) present in U3O8 and U{sub 3}Si{sub 2}, meeting the needs of nuclear reactors in the nuclear fuel qualification type MTR. For that purposes, will be applied the X-ray fluorescence technique which allows fast chemical and nondestructive analysis, aside from sample preparation procedures that do not require previous chemical

MTR fuel plate qualification capabilities at SCK-CEN

International Nuclear Information System (INIS)

Koonen, E.; Jacquet, P.

2002-01-01

In order to enhance the capabilities of BR2 in the field of MTR fuel plate testing, a dedicated irradiation device has been designed. In its basic version this device allows the irradiation of 3 fuel plates. The central fuel plate may be replaced by a dummy plate or a plate carrying dosimeters. A first FUTURE device has been built. A benchmark irradiation has been executed with standard BR2 fuel plates in order to qualify this device. Detailed neutronic calculations were performed and the results compared to the results of the post-irradiation examinations of the plates. These comparisons demonstrate the capability to conduct a fuel plate irradiation program under requested and well-known irradiation conditions. Further improvements are presently being designed in order to extend the ranges of heat flux and surface temperature of the fuel plates that can be handled with the FUTURE device. (author)

Thorough Mastication Prior to Swallowing Increases Postprandial Satiety and the Thermic Effect of a Meal in Young Women.

Science.gov (United States)

Komai, Naho; Motokubota, Naoko; Suzuki, Maki; Hayashi, Ikuyo; Moritani, Toshio; Nagai, Narumi

2016-01-01

There is evidence to support that mastication may contribute to the prevention of weight gain via reduction of appetite sensations and subsequent energy intake. However, the metabolic effect of mastication after consumption of a daily meal, composed of the staple food (rice), soup, main and side dishes, is limited. Therefore, the effect of thorough mastication on greater satiety and the thermic effect of a meal (TEM) was investigated in young women. In study 1, energy expenditure (EE) derived from masticatory muscle activity for 20 min was measured while chewing hard, tasteless, non-caloric gum in seven subjects. In study 2, ten subjects consumed a solid meal performing 30 chews per mouthful (30 CPM), or swallowed the same, pureed meal without chewing (0 CPM) on two separate days, and postprandial EE, substrate oxidation, subjective appetite ratings and autonomic nervous system (ANS) activity for 3 h were examined. Both test meals were iso-caloric (2,510 kJ) and -weighted (884 g), and consumed in 20 min. From study 1, the EE of mastication itself for the 20 min was estimated to be 3.7±0.8 kJ. From study 2, significantly higher TEM (134.2±15.5 vs. 67.8±13.8 kJ/3 h, pmastication before swallowing increased postprandial satiety and the TEM in young women, suggesting such eating behavior may be useful for preventing obesity.

Neutronic modelling of the Harwell MTR's: some recent problems

International Nuclear Information System (INIS)

Taylor, N.P.

1984-01-01

Use of the Harwell Materials Testing Reactors for the irradiation of experimental rigs gives rise to a number of requirements for calculations of neutron fluxes. In addition photon fluxes are required for estimates of nuclear heating rates. A range of calculational methods are employed, from simple cell to whole reactor models, and the latter have been extended for preliminary design studies for the next generation of MTR to replace DIDO and PLUTO. The technique used for these various models are described in this note, with emphasis on the areas in which modelling problems are encountered. The applications divide into three distinct areas: calculations concerning rigs irradiated within the reactor core, those for rigs positioned in the D 2 O reflector surrounding the core, and design studies for a replacement reactor. (Auth.)

A model development for a thermohydraulic calculation material convection of MTR (Materials Testing Reactors)

International Nuclear Information System (INIS)

Abbate, P.

1990-01-01

The CONVEC program developed for the thermohydraulic calculation under a natural convection regime for MTR type reactors is presented. The program is based on a stationary, one dimensional model of finite differences that allow to calculate the temperatures of cooler, cladding and fuel as well as the flow for a power level specified by the user. This model has been satisfactorily validated by a water cooling (liquid phase) and air system. (Author) [es

Decontamination and decommissioning of the MTR-603 HB-2 cubicle

International Nuclear Information System (INIS)

Smith, D.L.

1987-01-01

The decontamination and decommissioning (D and D) of the MTR-603 HB-2 cubicle located at the Idaho National Engineering Laboratory (INEL) are described. The HP-2 cubicle became radioactively contaminated during out-of-pile circulating water loop experiments conducted in the Materials Testing Reactor in the 1950s and 1960s. The work performed to accomplish the D and D objectives of reducing the high radiation fields caused by contamination inside the cubicle, preventing future contamination spread, and making about 1400 ft 2 of floor space available for reuse are discussed. Decommissioning of the HB-2 cubicle consisted of total dismantlement of the cubicle and its contents and was performed without disrupting ongoing laboratory work being conducted in areas surrounding the HB-2 cubicle

Theoretical experimental study of the factors that govern the molybdenum absorption signal by means of electro thermic atomic absorption spectroscopy

International Nuclear Information System (INIS)

Garaboto Farfan, M. A.

1996-01-01

The formation of molybdenum carbides in the atomizer, used in the electro thermic atomic absorption spectroscopy, is responsible for incomplete analyte removal in its analysis. This generates the apparition of the memory effect and little precision in the results. In this work, different variables that could affect the molybdenum absorption sign were investigated, as well as the influence of hydrochloric acid on the memory effect, by means of studies in the different stages: drying, calcination and atomization, and the samples deposition order in molybdenum solutions, either acidified or not acidified [es

Chemometrics application in fuel's MTR type chemical characterization by X-ray fluorescence

International Nuclear Information System (INIS)

Silva, Clayton Pereira da

2012-01-01

In Brazil and worldwide the nuclear power has occupied a prominent position with many applications in industry, power generation, environment and medicine, improving the quality of tests and treatments, therefore people's lives. Uranium is the main element used in nuclear facilities and it s employed as base material to generation of electricity in the manufacture of radiopharmaceuticals. In the '50s, during the Cold War, the then newly created International Atomic Energy Agency proposed to oversee nuclear facilities and encourage the manufacture of nuclear fuels with low-enriched uranium (LEU) fuel came then type Material Test Reactor (MTR), manufactured initially in U 3 O 8 and U 3 Si 2 later, both dispersed in aluminum. The use of this technology requires a constant improvement of all processes involving the manufacture of MTR subject to several international protocols, which seek to ensure the reliability of the fuel from the standpoint of practical and environmental. In this context, the control of impurities, from the point of view of neutron economy, directly affects the quality of any nuclear fuel, so strict control is necessary. The literature has reported procedures which, beyond generating residues, are lengthy and costly, they need calibration curve and consequently reference materials. The aim of this work is to establish and validate a methodology for nondestructive quantitative chemical analysis, low cost and analysis time, as well as minimize the generation of waste, for multielement determination of major constituents (Utotal and Si) and impurities (B, Mg, Al, Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd and others) present in U3O8 and U 3 Si 2 , meeting the needs of nuclear reactors in the nuclear fuel qualification type MTR. For that purposes, will be applied the X-ray fluorescence technique which allows fast chemical and nondestructive analysis, aside from sample preparation procedures that do not require previous chemical treatments (dissolving

The effect of fast eating on the thermic effect of food in young Japanese women.

Science.gov (United States)

Toyama, Kenji; Zhao, Xifan; Kuranuki, Sachi; Oguri, Yasuo; Kashiwa Kato, Eriko; Yoshitake, Yutaka; Nakamura, Teiji

2015-03-01

The relationship between eating speed and the thermic effect of food (TEF) remains unclear. We investigated the difference in the TEF when meals containing the same amount of energy were eaten in 5 min (fast eating) or 15 min (regular eating). Subjects were nine non-obese young women. Following a 350 kcal (1464 kJ) meal, energy expenditure and autonomic nervous system activity were measured. The frequency of mastication was also calculated. The TEF for the 15-min period after the start of eating with fast eating was significantly lower than with regular eating (p frequency/high-frequency ratio and TEF at 5-min intervals up to 20 min after the start of eating and between total mastication frequency and TEF during ingestion. Fast eating may reduce the TEF, potentially because a decrease in mastication frequency decreases sympathetic nervous system activity.

MTR radiological database for SRS spent nuclear fuel facilities

International Nuclear Information System (INIS)

Blanchard, A.

2000-01-01

A database for radiological characterization of incoming Material Test Reactor (MTR) fuel has been developed for application to the Receiving Basin for Offsite Fuels (RBOF) and L-Basin spent fuel storage facilities at the Savannah River Site (SRS). This database provides a quick quantitative check to determine if SRS bound spent fuel is radiologically bounded by the Reference Fuel Assembly used in the L-Basin and RBOF authorization bases. The developed database considers pertinent characteristics of domestic and foreign research reactor fuel including exposure, fuel enrichment, irradiation time, cooling time, and fuel-to-moderator ratio. The supplied tables replace the time-consuming studies associated with authorization of SRS bound spent fuel with simple hand calculations. Additionally, the comprehensive database provides the means to overcome resource limitations, since a series of simple, yet conservative, hand calculations can now be performed in a timely manner and replace computational and technical staff requirements

Decontamination and decommissioning of the MTR-603 HB-2 cubicle. Final report

International Nuclear Information System (INIS)

Smith, D.L.

1985-12-01

This report describes the decontamination and decommissioning (D and D) of the MTR-603 HB-2 cubicle located at the Idaho National Engineering Laboratory (INEL). The HB-2 cubicle became radioactively contaminated during out-of-pile circulating water loop experiments conducted in the Materials Testing Reactor in the 1950s and 1960s. This report describes work performed to accomplish the D and D objectives of reducing the high radiation fields caused by contamination inside the cubicle, preventing future contamination spread, and making about 1400 ft 2 of floor space available for reuse. D and D of the HB-2 cubicle consisted of total dismantlement of the cubicle and its contents

Implementation of a quality assurance system for the design and manufacturing of fuel assembly MTR-plate type

International Nuclear Information System (INIS)

Koll, J.H.

1987-01-01

Since more than 30 years ago, fuel assemblies (FA) of the MTR-Plate type, for research reactors, have been developed and produced using well known technologies, with different methods for the design, manufacturing, quality control and subsequent verification of FA behaviour, as well as of the design data. The FA and its reliability has been improved through the recycling of the obtained information. No nuclear accidents or major incidents have taken place that can be blamed to FA due to design, manufacturing or its use. Since the 70's, the use of Quality Assurance methodology has been increased, especially for Nuclear Power Plants, in order to ensure safety for these reactors. The use of QA for reactors for research, testing or other uses, has also been steadily increased, not only due to safety reasons, but also because of its convenience for a good operation, being presently a common requirement of the operator of the installation. Herewith is described the way the QA system that has been developed for the design, manufacturing, quality control and supply of MTR-plate type FA, at the Development Section of the Argentine Atomic Energy Commission (CNEA). (Author)

Thermohydraulic study of a MTR fuel element aimed at the construction of an irradiation facility; Estudo termohidraulico de um elemento combustivel tipo MTR visando a construcao de um dispositivo de irradiacao

Energy Technology Data Exchange (ETDEWEB)

Coragem, Helio Boemer de Oliveira

1980-07-01

A thermohydraulic study of MTR fuel element is presented as a basic requirement for the development of an irradiation facility for testing fuel elements. A computer code named 'Thermo' has been developed for this purpose, which can stimulate different working conditions, such as, cooling, power elements and neutron flux, performing all pertinent thermohydraulic calculations. Thermocouples were used to measure the temperature gradients of the cooling fluid throughout the IEAR-1 reactor core. All experimental data are in good agreement with the theoretical model applied in this work. Finally, a draft of the proposed facility and its safety system is presented. (author)

Thermohydraulic study of a MTR fuel element aimed at the construction of an irradiation facility; Estudo termohidraulico de um elemento combustivel tipo MTR visando a construcao de um dispositivo de irradiacao

Energy Technology Data Exchange (ETDEWEB)

Coragem, Helio Boemer de Oliveira

1980-07-01

A thermohydraulic study of MTR fuel element is presented as a basic requirement for the development of an irradiation facility for testing fuel elements. A computer code named 'Thermo' has been developed for this purpose, which can stimulate different working conditions, such as, cooling, power elements and neutron flux, performing all pertinent thermohydraulic calculations. Thermocouples were used to measure the temperature gradients of the cooling fluid throughout the IEAR-1 reactor core. All experimental data are in good agreement with the theoretical model applied in this work. Finally, a draft of the proposed facility and its safety system is presented. (author)

Chemometrics application in fuel's MTR type chemical characterization by X-ray fluorescence; Aplicacao da quimiometria para caracterizacao quimica de combustiveis tipo MTR por fluorescencia de raios-X

Energy Technology Data Exchange (ETDEWEB)

Silva, Clayton Pereira da

2012-07-01

In Brazil and worldwide the nuclear power has occupied a prominent position with many applications in industry, power generation, environment and medicine, improving the quality of tests and treatments, therefore people's lives. Uranium is the main element used in nuclear facilities and it s employed as base material to generation of electricity in the manufacture of radiopharmaceuticals. In the '50s, during the Cold War, the then newly created International Atomic Energy Agency proposed to oversee nuclear facilities and encourage the manufacture of nuclear fuels with low-enriched uranium (LEU) fuel came then type Material Test Reactor (MTR), manufactured initially in U{sub 3}O{sub 8} and U{sub 3}Si{sub 2} later, both dispersed in aluminum. The use of this technology requires a constant improvement of all processes involving the manufacture of MTR subject to several international protocols, which seek to ensure the reliability of the fuel from the standpoint of practical and environmental. In this context, the control of impurities, from the point of view of neutron economy, directly affects the quality of any nuclear fuel, so strict control is necessary. The literature has reported procedures which, beyond generating residues, are lengthy and costly, they need calibration curve and consequently reference materials. The aim of this work is to establish and validate a methodology for nondestructive quantitative chemical analysis, low cost and analysis time, as well as minimize the generation of waste, for multielement determination of major constituents (Utotal and Si) and impurities (B, Mg, Al, Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd and others) present in U3O8 and U{sub 3}Si{sub 2}, meeting the needs of nuclear reactors in the nuclear fuel qualification type MTR. For that purposes, will be applied the X-ray fluorescence technique which allows fast chemical and nondestructive analysis, aside from sample preparation procedures that do not require previous

System for uranium superficial density measurement in U3Si2 MTR fuel plates using radiography

International Nuclear Information System (INIS)

Hey, Martin A.; Gomez Marlasca, Fernando

2003-01-01

The paper describes a method for measuring uranium superficial density in high density uranium silicide (U 3 Si 2 ) MTR fuel plates, through the use of industrial radiography, a set of patterns built for this purpose, a transmission optical densitometer, and a quantitative model of analysis and measurement. Our choice for this particular method responds to its high accuracy, low cost and easy implementation according to the standing quality control systems. (author)

Preliminary developments of MTR plates with uranium nitride

Energy Technology Data Exchange (ETDEWEB)

Durand, J.P.; Laudamy, P. [CERCA, Romans (France); Richter, K. [Institut fuer Transurane, Karlsruhe (Germany)

1997-08-01

In the opinion of CERCA, the total weight of Uranium per MTR plate (without changing the external dimensions) cannot be further increased using U{sub 3}Si{sub 2}. Limits have been reached on plates with a thicker meat or loaded to 6g Ut/cm{sup 3}. The use of a denser fuel like Uranium mononitride could permit an increase in these limits. A collaboration between the Institute for Transuranium Elements (ITU), Joint Research Centre of the European Commission, and CERCA has been set ut. The preliminary studies at the ITU to check compatibility between aluminium and UN proved that there are no metallurgical interactions below 500{degrees}C. Feasibility of the manufacturing, on a laboratory scale at CERCA, of depleted Uranium mononitride plates loaded to 7 g Ut/cm{sup 3} has been demonstrated. The manufacturing process, however, is only one aspect of the development of a new fuel. The experience gained in the case of U{sub 3}Si{sub 2} has shown that the development of a new fuel requires considerable time and financial investment. Such a development certainly represents an effort of about 10 years.

Preliminary developments of MTR plates with uranium nitride

International Nuclear Information System (INIS)

Durand, J.P.; Laudamy, P.; Richter, K.

1997-01-01

In the opinion of CERCA, the total weight of Uranium per MTR plate (without changing the external dimensions) cannot be further increased using U 3 Si 2 . Limits have been reached on plates with a thicker meat or loaded to 6g Ut/cm 3 . The use of a denser fuel like Uranium mononitride could permit an increase in these limits. A collaboration between the Institute for Transuranium Elements (ITU), Joint Research Centre of the European Commission, and CERCA has been set ut. The preliminary studies at the ITU to check compatibility between aluminium and UN proved that there are no metallurgical interactions below 500 degrees C. Feasibility of the manufacturing, on a laboratory scale at CERCA, of depleted Uranium mononitride plates loaded to 7 g Ut/cm 3 has been demonstrated. The manufacturing process, however, is only one aspect of the development of a new fuel. The experience gained in the case of U 3 Si 2 has shown that the development of a new fuel requires considerable time and financial investment. Such a development certainly represents an effort of about 10 years

Final qualification of an industrial wide range neutron instrumentation in the Osiris MTR reactor

Energy Technology Data Exchange (ETDEWEB)

Barbot, L.; Normand, S. [CEA, LIST, Laboratoire Capteur et Architectures Electroniques, F-91191 Gif Sur Yvette (France); Pasdeloup, P. [AREVA TA, Controle Commande and Mesures, F-13762 Les Milles (France); Lescop, B. [CEA, INSTN, UEIN, F-91191 Gif Sur Yvette (France)

2009-07-01

This work deals with the final qualification of the IRINA in-core neutron flux measurement system in the MTR Osiris reactor. A specific irradiation device has been set up to validate the last changes in the complete system (electronic, transmitting cable and monitor). Experimental results show the IRINA measurement system meet entirely the in-core reactor conditions requirements: a thermal neutron flux from 10{sup 7} n.cm{sup -2}.s{sup -1} up to 10{sup 14} n.cm{sup -2}.s{sup -1} and a temperature of 300 C degrees during a minimum operating time of 1000 hours. (authors)

Preparation of U3O8 powder for MTR type fuel from ammonium uranyl carbonate

International Nuclear Information System (INIS)

Marcondes, G.H.; Riella, H.G.

1990-08-01

In this paper it is described the research done at IPEN-CNEN/SP on the preparation of U 3 O 8 powder from calcination of the AUC, with appropriate characteristics to be used as dispersoid for MTR type fuel. The calcination in air of the AUC leads a U 3 O 8 powder that is further processed to obtain a powder with density and particle size as especifications. The important process parameters are here discussed with the variation AUC calcination temperature and sintering time of the U 3 O 8 powder. (author) [pt

Vacuum induction melting of uranium ingots

International Nuclear Information System (INIS)

Hussain, M.M.; Bagchi, S.N.; Singh, S.P.

1992-01-01

Massive uranium ingot is produced from green salt (UF 4 ) using calciothermic reduction (CTR) or magnesiothermic reduction (MTR) process. CTR process has been replaced by MTR process at Trombay due to economic considerations. This paper highlights problems associated with the vacuum induction melting of MTR ingots and the remedial measures taken to produce good quality billets. Details of metallographic examination of inclusions in ingots and billets have been incorporated. (author). 3 figs

Delineation of cortical pathology in multiple sclerosis using multi-surface magnetization transfer ratio imaging

Directory of Open Access Journals (Sweden)

David A. Rudko

2016-01-01

Full Text Available The purpose of our study was to evaluate the utility of measurements of cortical surface magnetization transfer ratio (csMTR on the inner, mid and outer cortical boundaries as clinically accessible biomarkers of cortical gray matter pathology in multiple sclerosis (MS. Twenty-five MS patients and 12 matched controls were recruited from the MS Clinic of the Montreal Neurological Institute. Anatomical and magnetization transfer ratio (MTR images were acquired using 3 Tesla MRI at baseline and two-year time-points. MTR maps were smoothed along meshes representing the inner, mid and outer neocortical boundaries. To evaluate csMTR reductions suggestive of sub-pial demyelination in MS patients, a mixed model analysis was carried out at both the individual vertex level and in anatomically parcellated brain regions. Our results demonstrate that focal areas of csMTR reduction are most prevalent along the outer cortical surface in the superior temporal and posterior cingulate cortices, as well as in the cuneus and precentral gyrus. Additionally, age regression analysis identified that reductions of csMTR in MS patients increase with age but appear to hit a plateau in the outer caudal anterior cingulate, as well as in the precentral and postcentral cortex. After correction for the naturally occurring gradient in cortical MTR, the difference in csMTR between the inner and outer cortex in focal areas in the brains of MS patients correlated with clinical disability. Overall, our findings support multi-surface analysis of csMTR as a sensitive marker of cortical sub-pial abnormality indicative of demyelination in MS patients.

Radiological safety assessment of Thoron inhalation hazards during DDU handling at UMP, Trombay

International Nuclear Information System (INIS)

Shailesh, M.; Belhe, M.S.; Malti; Narayani, K.; Satpati, S.K.

2012-01-01

Uranium Extraction Division, Bhabha Atomic Research Centre, Mumbai has been producing nuclear grade uranium metal from Ammonium di-uranate received from IRE to meet the fuel requirement of research reactors of Bhabha Atomic Research Centre at Uranium Metal Plant (UMP) in Trombay. In UMP, uranium oxide powder (U 3 O 8 and UO 3 ) is first reduced to uranium dioxide in reduction reactor and is converted to uranium tetra fluoride in hydro fluorination reactor. After removing moisture and acid vapour in expulsion area, reduction of uranium tetrafluoride is carried out with magnesium in magnesio-thermic reduction (MTR) reactor, pure uranium metal ingot with magnesium fluoride slag is produced. Finally natural uranium ingot is separated from slag in ingot discharging area. However deeply depleted uranium (DDU) metal was produced from uranium oxide (reprocessed uranium) received from PREFRE, Tarapur, as a special campaign. External radiation hazards are not dominant during the processing of natural uranium in uranium metal Plant. However it was observed that during processing of DDU metal, external and internal hazards are significant because of daughter products of thoron. Inhalation dose due to thoron was found less during charging of UO 3 powder operation than ingot discharge operation because of pneumatic powder transport system used for charging operation. It is estimated that after introduction of new blower system in different powder handling operation areas, the potential effective inhalation dose due to thoron inhalation may get reduced by 60% - 80%

ANALISIS POLA MANAJEMEN BAHAN BAKAR DESAIN TERAS REAKTOR RISET TIPE MTR

Directory of Open Access Journals (Sweden)

Lily Suparlina

2015-03-01

Full Text Available Parameter neutronik dibutuhkan dalam mendesain teras reaktor riset. Reaktor riset jenis MTR (Material Testing Reactor sangat diminati karena dapat digunakan baik untuk riset dan juga produksi radio isotop. Reaktor riset yang ada saat ini sudah tua sehingga dibutuhkan desain reaktor yang mempunyai teras kompak. Desain teras reaktor riset yang sudah ada saat ini belum cukup memadai untuk memenuhi persyaratan di dalam UCD yang telah ditetapkan yaitu fluks neutron termal di teras 1x1015 n/cm2s, oleh karena itu perlu dibuat desain teras reaktor baru sebagai alternatif yang kompak dan dapat menghasilkan fluks neutron tinggi. Telah dilakukan perhitungan dan analisis terhadap manajemen bahan bakar desain teras kompak dengan konfigurasi teras 5x5, berbahan bakar U9Mo-Al dan tinggi teras aktif 70 cm. Tujuan dari riset ini untuk memperoleh fluks neutron di teras memenuhi kebutuhan seperti yang telah ditetapkan di UCD dengan panjang siklus operasi minimum 20 hari pada daya 50 MW. Perhitungan dilakukan dengan menggunakan paket program komputer WIMSD-5B untuk menggenerasi tampang lintang makroskopik bahan bakar dan Batan-FUEL untuk memperoleh nilai parameter neutronik serta Batan-3DIFF untuk perhitungan nilai reaktivitas batang kendali. Perhitungan parameter neutronik teras reaktor riset ini dilakukan untuk bahan bakar U-9Mo-Al dengan tingkat muat bervariasi dan 2 macam pola pergantian bahan bakar yaitu teras segar dan teras setimbang. Hasil analisis menunjukkan bahwa pada teras segar, tingkat muat 235U sebesar 360 gram, 390 gram dan 450 gram memenuhi kriteria keselamatan dan kriteria penerimaan di UCD dengan nilai fluks neutron termal di teras lebih dari 1x1015 n/cm2s dan panjang siklus >20 hari, sedangkan pada teras setimbang panjang siklus dapat terpenuhi hanya untuk tingkat muat 450 gram. Kata kunci: desain teras reaktor, bahan bakar UMo, pola bahan bakar, WIMS, BATAN-FUEL   Research reactor core design needs neutronics parameter calculation use computer

Analysis of fuel management pattern of research reactor core of the MTR type design

International Nuclear Information System (INIS)

Lily Suparlina; Tukiran Surbakti

2014-01-01

Research reactor core design needs neutronics parameter calculation use computer codes. Research reactor MTR type is very interested because can be used as research and also a radioisotope production. The research reactor in Indonesia right now is already 25 years old. Therefore, it is needed to design a new research reactor as a compact core. Recent research reactor core is not enough to meet criteria acceptance in the UCD which already determined namely thermal neutron flux in the core is 1.0x10 15 n/cm 2 s. so that it is necessary to be redesign the alternative core design. The new research reactor design is a MTR type with 5x5 configuration core, uses U9Mo-Al fuel, 70 cm of high and uses two certainly fuel management pattern. The aim of this research is to achieve neutron flux in the core to meet the criteria acceptance in the UCD. Calculation is done by using WIMSD-B, Batan-FUEL and Batan-3DIFF codes. The neutronic parameters to be achieved by this calculation are the power level of 50 MW thermal and core cycle of 20 days. The neutronics parameter calculation is done for new U-9Mo-Al fuel with variation of densities.The result of calculation showed that the fresh core with 5x5 configuration, 360 gram, 390 gram and 450 gram of fuel loadings have meet safety margin and acceptance criteria in the UCD at the thermal neutron flux is more then 1.0 x 10 15 n/cm 2 s. But for equilibrium core is only the 450 gram of loading meet the acceptance criteria. (author)

Thermical Load Calculation and Capacity of Cooling and Venting Equipment of a Diesel Engine Emissions Study Bench; Calculo de Cargas Termicas y Capacidad de los Equipos de Refrigeracion y Ventilacion de un Banco de Estudio de Emisiones de Motores Diesel

Energy Technology Data Exchange (ETDEWEB)

Rojas Garcia, E.; Fonseca Gonzalez, N. A.

2005-07-01

The present report tries to develop the calculation of thermical loads and to define the capacity of the equipments of cooling and ventilation that should have the engines test bench that is being ensemble in the installation of the CIEMAT named {sup D}iesel engine emissions study bench (E65-P0). The test bench is formed essentially by a dynamometrical brake and an engine connected at previous one, both of them inside a cabin of isolation acoustic. The thermical loads to be dissipated will be calculated for all the elements that compose the bench and considering his maximum values, to determine the suitable system of cooling air - water of the devices and ventilation in the cabin. (Author) 2 refs.

Early detection of coolant boiling in research reactors with MTR-type fuel

International Nuclear Information System (INIS)

Kozma, R.; Turkcan, E.; Verhoef, J.P.

1992-10-01

A reactor core monitoring system having the function of early detection of boiling in the coolant channels of research reactors with MTR-type fuel is introduced. The system is based on the on-line analysis of signals of various ex-core and in-core neutron detectors. Early detection of coolant boiling cannot be accomplished by the evaluation of the DC components of these detectors in a number of practically important cases of boiling anomaly. It is shown that the noise component of the available neutron detector signals can be used for the detection of boiling in these cases. Experiments have been carried out at a boiling setup in the research reactor HOR of the Interfaculty Reactor Institute, Technical University of Delft, The Netherlands. (author). 8 refs., 11 figs

Reactivity worth of the thermal column of a MTR type swimming pool research reactor using low enriched uranium fuel

International Nuclear Information System (INIS)

Ali Khan, L.; Ahmad, N.

2002-01-01

The reactivity worth of the thermal column of a typical MTR type swimming pool research reactor using low enriched uranium fuel has been determined by modeling the core using standard computer codes. It was also measured experimentally by operating the reactor in the stall and open ends. The calculated value of the reactivity worth of the thermal column is about 14% greater than the experimentally determined value

A mesoscopic thermomechanically coupled model for thin-film shape-memory alloys by dimension reduction and scale transition

Czech Academy of Sciences Publication Activity Database

Benešová, B.; Kružík, Martin; Pathó, G.

2014-01-01

Roč. 26, č. 5 (2014), s. 683-713 ISSN 0935-1175 R&D Projects: GA ČR GAP201/10/0357; GA ČR(CZ) GAP201/12/0671 Grant - others:GA ČR(CZ) GAP105/11/0411 Institutional support: RVO:67985556 Keywords : Dimension reduction problems · * Parametrized measures * Thermomechanics Subject RIV: BA - General Mathematics Impact factor: 1.779, year: 2014 http://library.utia.cas.cz/separaty/2014/MTR/kruzik-0439681.pdf

Thermohydraulic study of a MTR fuel element aimed at the construction of an irradiation facility

International Nuclear Information System (INIS)

Coragem, Helio Boemer de Oliveira

1980-01-01

A thermohydraulic study of MTR fuel element is presented as a basic requirement for the development of an irradiation facility for testing fuel elements. A computer code named 'Thermo' has been developed for this purpose, which can stimulate different working conditions, such as, cooling, power elements and neutron flux, performing all pertinent thermohydraulic calculations. Thermocouples were used to measure the temperature gradients of the cooling fluid throughout the IEAR-1 reactor core. All experimental data are in good agreement with the theoretical model applied in this work. Finally, a draft of the proposed facility and its safety system is presented. (author)

Regional patterns of grey matter atrophy and magnetisation transfer ratio abnormalities in multiple sclerosis clinical subgroups: a voxel-based analysis study.

Science.gov (United States)

Mallik, Shahrukh; Muhlert, Nils; Samson, Rebecca S; Sethi, Varun; Wheeler-Kingshott, Claudia A M; Miller, David H; Chard, Declan T

2015-04-01

In multiple sclerosis (MS), demyelination and neuro-axonal loss occur in the brain grey matter (GM). We used magnetic resonance imaging (MRI) measures of GM magnetisation transfer ratio (MTR) and volume to assess the regional localisation of reduced MTR (reflecting demyelination) and atrophy (reflecting neuro-axonal loss) in relapsing-remitting MS (RRMS), secondary progressive MS (SPMS) and primary progressive MS (PPMS). A total of 98 people with MS (51 RRMS, 28 SPMS, 19 PPMS) and 29 controls had T1-weighted volumetric and magnetisation transfer scans. SPM8 was used to undertake voxel-based analysis (VBA) of GM tissue volumes and MTR. MS subgroups were compared with controls, adjusting for age and gender. A voxel-by-voxel basis correlation analysis between MTR and volume within each subject group was performed, using biological parametric mapping. MTR reduction was more extensive than atrophy. RRMS and SPMS patients showed proportionately more atrophy in the deep GM. SPMS and PPMS patients showed proportionately greater cortical MTR reduction. RRMS patients demonstrated the most correlation of MTR reduction and atrophy in deep GM. In SPMS and PPMS patients, there was less extensive correlation. These results suggest that in the deep GM of RRMS patients, demyelination and neuro-axonal loss may be linked, while in SPMS and PPMS patients, neuro-axonal loss and demyelination may occur mostly independently. © The Author(s), 2014.

A CFD numerical model for the flow distribution in a MTR fuel element

International Nuclear Information System (INIS)

Andrade, Delvonei Alves de; Santos, Pedro Henrique Di Giovanni; Oliveira, Fabio Branco Vaz de; Torres, Walmir Maximo; Umbehaun, Pedro Ernesto; Souza, Jose Antonio Batista de; Belchior Junior, Antonio; Sabundjian, Gaiane; Prado, Adelk de Carvalho; Angelo, Gabriel

2015-01-01

Previously, an instrumented dummy fuel element (DMPV-01), with the same geometric characteristics of a MTR fuel element, was designed and constructed for pressure drop and flow distribution measurement experiments at the IEA-R1 reactor core. This dummy element was also used to measure the flow distribution among the rectangular flow channels formed by element fuel plates. A CFD numerical model was developed to complement the studies. This work presents the proposed CFD model as well as a comparison between numerical and experimental results of flow rate distribution among the internal flow channels. Numerical results show that the model reproduces the experiments very well and can be used for the studies as a more convenient and complementary tool. (author)

A CFD numerical model for the flow distribution in a MTR fuel element

Energy Technology Data Exchange (ETDEWEB)

Andrade, Delvonei Alves de; Santos, Pedro Henrique Di Giovanni; Oliveira, Fabio Branco Vaz de; Torres, Walmir Maximo; Umbehaun, Pedro Ernesto; Souza, Jose Antonio Batista de; Belchior Junior, Antonio; Sabundjian, Gaiane; Prado, Adelk de Carvalho, E-mail: acprado@ipen.br, E-mail: delvonei@ipen.br, E-mail: dpedro_digiovanni_s@hotmail.com, E-mail: fabio@ipen.br, E-mail: wmtorres@ipen.br, E-mail: umbehaun@ipen.br, E-mail: jasouza@ipen.br, E-mail: abelchior@ipen.br, E-mail: gdjian@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Engenharia Nuclear; Angelo, Edvaldo, E-mail: eangelo@mackenzie.br [Universidade Presbiteriana Mackenzie, Sao Paulo, SP (Brazil); Angelo, Gabriel, E-mail: gangelo@fei.edu.br [Fundacao Educacional Inaciana (FEI), Sao Bernardo do Campo, SP (Brazil)

2015-07-01

Previously, an instrumented dummy fuel element (DMPV-01), with the same geometric characteristics of a MTR fuel element, was designed and constructed for pressure drop and flow distribution measurement experiments at the IEA-R1 reactor core. This dummy element was also used to measure the flow distribution among the rectangular flow channels formed by element fuel plates. A CFD numerical model was developed to complement the studies. This work presents the proposed CFD model as well as a comparison between numerical and experimental results of flow rate distribution among the internal flow channels. Numerical results show that the model reproduces the experiments very well and can be used for the studies as a more convenient and complementary tool. (author)

Bacterial Reduction Of Barium Sulphate By Sulphate-Reducing Bacteria

Directory of Open Access Journals (Sweden)

Luptáková Alena

2015-12-01

Full Text Available Acid mine drainage (AMD is a worldwide problem leading to contamination of water sources. AMD are characterized by low pH and high content of heavy metals and sulphates. The barium salts application presents one of the methods for the sulphates removing from AMD. Barium chloride, barium hydroxide and barium sulphide are used for the sulphates precipitation in the form of barium sulphate. Because of high investment costs of barium salts, barium sulphide is recycled from barium sulphate precipitates. It can be recycled by thermic or bacterial reduction of barium sulphate. The aim of our study was to verify experimentally the possibility of the bacterial transformation of BaSO4 to BaS by sulphate-reducing bacteria. Applied BaSO4 came from experiments of sulphates removal from Smolnik AMD using BaCl2.

Decontamination and decommissioning of the MTR [Materials Testing Reactor]-603 HB-2 cubicle

International Nuclear Information System (INIS)

Smith, D.L.

1987-10-01

This paper describes the decontamination and decommissioning (D and D) of the MTR-603 HB-2 cubicle located at the Idaho National Engineering Laboratory (INEL). The HB-2 cubicle became radioactively contaminated during out-of-pile circulating water loop experiments conducted in the Materials Testing Reactor in the 1950s and 1960s. This paper describes work performed to accomplish the D and D objectives of reducing the high radiation fields caused by contamination inside the cubicle, preventing future contamination spread, and making about 1400 ft 2 of floor space available for reuse. Decommissioning of the HB-2 cubicle consisted of total dismantlement of the cubicle and its contents and was performed without disrupting ongoing laboratory work being conducted in areas surrounding the HB-2 cubicle. 3 refs., 7 figs., 4 tabs

Transportation of 33 irradiated MTR fuel assemblies from FRM/Garching to Savannah River Site, USA, using a GNS transport cask and using a new loading device

International Nuclear Information System (INIS)

Dreesen, K.; Goetze, H.G.; Holst, L.; Gerstenberg, H.; Schreckenbach, K.

2000-01-01

According to the Department of Energy program of the return spent fuel from the foreign research reactors operators, 33 irradiated MTR box shaped fuel assemblies from the Technical University Munich were shipped to SRS/USA. The fuel assemblies were irradiated for typically 800 full days and, after a sufficient cooling time, loaded into a GNS 16 cask. The GNS 16 cask is a new transport cask for box shaped MTR fuel assemblies and TRIGA fuel assemblies and was used for the first time at the FRM Garching. The capacity of the cask is 33 box shaped MTR fuel assemblies. During the loading of the fuel assemblies, a newly developed loading device was used. The main components of the loading device are the transfer flask, the shielded loading lock, adapter plate and a mobile water tank. The loading device works mechanically with manpower. For the handling of the transfer flask, a crane with a capacity of 5 metric tons is necessary. During installation of the lid the mobile water pool is filled with demineralized water and the shielded loading passage is taken away. After that the lid is put on the cask. After drainage, the mobile water pool is disassembled, and the cask is dewatered. Finally leak tests of all seals are made. The achieved leakage rate was -5 Pa x I/s. The work in FRM was done between 03.02.99 and 12.02.99 including a dry run and leak test. (author)

Technical ability of new MTR high-density fuel alloys regarding the whole fuel cycle

International Nuclear Information System (INIS)

Durand, J.P.; Maugard, B.; Gay, A.

1998-01-01

The development of new fuel alloys could provide a good opportunity to improve drastically the fuel cycle on the neutronic performances and the reprocessing point of view. Nevertheless, those parameters can only be considered if the fuel manufacture feasibility has been previously demonstrated. As a matter of fact, a MTR work group involving French partners (CEA, CERCA, COGEMA) has been set up in order to evaluate the technical ability of new fuels considering the whole fuel cycle. In this paper CERCA is presenting the preliminary results of UMo and UNbZr fuel plate manufacture, CEA is comparing to U 3 Si 2 the neutronic performances of fuels such as UMo, UN, UNbZr, while COGEMA is dealing with the reprocessing feasibility. (author)

Validation and verification of the MTR{sub P}C thermohydraulic package

Energy Technology Data Exchange (ETDEWEB)

Doval, Alicia [INVAP S.E., Bariloche, Rio Negro (Argentina). Nuclear Engineering Dept.]. E-mail: doval@invap.com.ar

1998-07-01

The MTR{sub P}C v2.6 is a computational package developed for research reactor design and calculation. It covers three of the main aspects of a research reactor: neutronic, shielding and thermohydraulic. In this work only the thermohydraulic package will be covered, dealing with verification and validation aspects. The package consists of the following steady state programs: CAUDVAP 2.60 for the hydraulic calculus, estimates the velocity distribution through different parallel channels connected to a common inlet and outlet common plenum. TERMIC 1H v3.0, used for the thermal design of research reactors, provides information about heat flux for a given maximum wall temperature, onset of nucleate boiling, redistribution phenomena and departure from nucleate boiling. CONVEC V3.0 allows natural convection calculations, giving information on heat fluxes for onset of nucleate boiling, pulsed and burn-out phenomena as well as total coolant flow. Results have been validated against experimental values and verified against theoretical and computational programmes results, showing a good agreement. (author)

Reduction of myocardial ischemia-reperfusion injury by mechanical tissue resuscitation using sub-atmospheric pressure.

Science.gov (United States)

Argenta, Louis C; Morykwas, Michael J; Mays, Jennifer J; Thompson, Edreca A; Hammon, John W; Jordan, James E

2010-03-01

Reperfusion-induced injury after myocardial infarction is associated with a well-defined sequence of early and late cardiomyocyte death. Most present attempts to ameliorate this sequence focus on a single facet of the complex process in an attempt to salvage cardiomyocytes. We examined, as proof of concept, the effects of mechanical tissue resuscitation (MTR) with controlled negative pressure on myocardial injury following acute myocardial infarction. Anesthetized swine were subjected to 75 minutes of left coronary artery occlusion and three hours of reperfusion. Animals were assigned to one of three groups: (A) untreated control; treatment of involved myocardium for 180 minutes of MTR with (B) -50 mmHg, or (C) -125 mmHg. All three groups were subjected to equivalent ischemic stress. Treatment of the ischemic area with MTR for 180 minutes significantly (p control: 9.3 +/- 1.8% (-50 mmHg) and 11.9 +/- 1.2% (-125 mmHg) versus 26.4 +/- 2.1% (control). Total area of cell death was reduced by 65% with -50 mmHg treatment and 55% in the -125 mmHg group. Treatment of ischemic myocardium with MTR, for a controlled period of time during reperfusion, successfully reduced the extent of myocardial death after acute myocardial infarction. These data provide evidence that MTR using subatmospheric pressure may be a simple, efficacious, nonpharmacological, mechanical strategy for decreasing cardiomyocyte death following myocardial infarction, which can be delivered in the operating room.

HEU and LEU MTR fuel elements as target materials for the production of fission molybdenum

International Nuclear Information System (INIS)

Sameh, A.A.; Bertram-Berg, A.

1993-01-01

The processing of irradiated MTR-fuels for the production of fission nuclides for nuclear medicine presents a significantly increasing task in the field of chemical separation technology of high activity levels. By far the most required product is MO-99, the mother nuclide of Tc-99m which is used in over 90% of the organ function tests in nuclear medicine. Because of the short half life of Mo-99 (66 h) the separation has to be carried out from shortly cooled neutron irradiated U-targets. The needed product purity, the extremely high radiation level, the presence of fission gases like xenon-133 and of volatile toxic isotopes such as iodine-131 and its compounds in kCi-scale require a sophisticated process technology

Criticality Studies in a Pilot Plant for Processing MTR-Type Irradiated Fuels; Estudios de Criticidad de una Planta Piloto para el Tratamiento de Combustibles Irradiados Tipo ' MTR '

Energy Technology Data Exchange (ETDEWEB)

Pereira Sanchez, G.; Uriarte Hueda, A. [Junta de Energia Nuclear, Division de Materiales Madrid (Spain)

1966-05-15

A number of theoretical studies on nuclear safety have been carried out in a pilot plant being constructed at the Junta de Energia Nuclear in Madrid for processing irradiated fuels from the MTR-type experimental reactor JEN-1. The study was carried out working with aqueous and organic solutions at two levels of {sup 235}U enrichment - 20% and 93%. The paper is divided into two main parts: the first deals with the individual items of equipment, and the interactions between these are studied in the second part. The calculations in this second part have been made using three different methods to make it more certain that the system as a whole can never be critical. The first method employed is based on the solid angle concept and makes it possible to fix the maximum {sup 235}U concentrations within the system. The second method, based on the albedo, supplies the value of the multiplication factor K of the whole assembly as a function of the concentration of {sup 235}U. In the last part, the distribution of the equipment is compared with other similar systems and experimental tests from other sources. Finally, the paper specifies the conditions for working the installation which ensure that a nuclear accident can never occur. (author) [Spanish] Se ha efectuado una serie de estudios teoricos sobre la seguridad nuclear de una planta piloto, que se encuentra en construccion en la Junta de Energfa Nuclear situada en Madrid, para el tratamiento de combustibles irradiados procedentes del reactor experimental JEN-1 del tipo MTR. El estudio se ha realizado utilizando disoluciones, tanto acuosas como organicas, con dos grados de enriquecimiento, 20% y 93% en {sup 235}U. Este trabajo comprende dos partes principales: en la primera se han considerado las distintas unidades del equipo individualmente y en la segunda se han estudiado las interacciones entre ellas. El calculo de esta segunda parte se ha hecho por tres metodos diferentes para tener una mayor seguridad de que el

Monitoring and assessment of thermical comfort in hygrothermically moderate offices and laboratories; Monitoraggio e valutazione del comfort termico negli ambienti di lavoro termoigrometricamente moderati

Energy Technology Data Exchange (ETDEWEB)

Speranza, A. [ENEA, Centro Ricerche `Ezio Clementel`, Bologna (Italy). Dip. Ambiente

1998-12-31

This study reports the results of the micro climatic measurements carried out in some ENEA work environments. The work conditions in the surveyed areas, have been evaluated following welfare indexes or thermical comfort: PMV= Predicted Mean Vote (ISO recommendation 7730); PPD= Predicted Percentage of Dissatisfied (ISO recommendation 7730). [Italiano] In questo studio sono riportati i risultati delle misure microclimatiche eseguite in alcuni ambienti di lavoro dei centri ENEA di Bologna. Le condizioni di lavoro (delle zone che sono state sottoposte ad indagine) sono state valutate mediante i seguenti indici di benessere o `comfort` termico: Voto Medio Previsto (PMV= Predicted Mean Vote) - raccomandazione ISO 7730; Percentuale Prevista di Insoddisfatti (PPD= Predicted Percentage of Dissatisfied) - raccomandazione ISO 7730.

Monitoring and assessment of thermical comfort in hygrothermically moderate offices and laboratories; Monitoraggio e valutazione del comfort termico negli ambienti di lavoro termoigrometricamente moderati

Energy Technology Data Exchange (ETDEWEB)

Speranza, A [ENEA, Centro Ricerche ` Ezio Clementel` , Bologna (Italy). Dip. Ambiente

1999-12-31

This study reports the results of the micro climatic measurements carried out in some ENEA work environments. The work conditions in the surveyed areas, have been evaluated following welfare indexes or thermical comfort: PMV= Predicted Mean Vote (ISO recommendation 7730); PPD= Predicted Percentage of Dissatisfied (ISO recommendation 7730). [Italiano] In questo studio sono riportati i risultati delle misure microclimatiche eseguite in alcuni ambienti di lavoro dei centri ENEA di Bologna. Le condizioni di lavoro (delle zone che sono state sottoposte ad indagine) sono state valutate mediante i seguenti indici di benessere o `comfort` termico: Voto Medio Previsto (PMV= Predicted Mean Vote) - raccomandazione ISO 7730; Percentuale Prevista di Insoddisfatti (PPD= Predicted Percentage of Dissatisfied) - raccomandazione ISO 7730.

MTR fuel element supply by CERCA through CECCN after the production transfer from NUKEM

International Nuclear Information System (INIS)

Hassel, H.W.

1991-01-01

The transfer of fuel element supply contracts, the corresponding Al-materials, structure parts, documents, uranium metal, customers related know-how, tools and equipment from NUKEM to CERCA has been completed, thus now giving a high flexibility for CERCA's workshop to fabricate and inspect large quantities of several types of fuel elements simultaneously. Based on this fact, on strategic planning for the next couple of years and on the fact that after 10 years of RERTR program the necessary high density fuel has been successfully developed and implemented, 'business as usual' in the field of fabrication has well become possible. The RERTR community should now use the great chance to concentrate all its efforts on problems which still strongly influence the fabrication and the use of MTR fuel elements: supply of enriched uranium,reprocessing capabilities and politics, transports of nuclear materials. (author)

Conditioning of spent fuel assemblies from the Rossendorf RFR research reactor in transport and storage containers of the type CASTOR MTR 2

International Nuclear Information System (INIS)

Schneider, B.; Hofmann, G.

1994-09-01

Most of the spent fuel assemblies are temporarily stored in the flooded fuel ponds AB 1 and AB 2 of the RFR, and some are still in the reactor core. The conditioning task described here is part of the RFR spent fuel management concept and covers the safe emplacement of the spent fuel elements in the CASTOR MTR 2 shipping containers and the sealing of the containers in compliance with the nuclear licence issued for the conditioning task. The transfer of the spent fuel assemblies from the present wet storage conditions to the dry storage conditions in the CASTOR MTR 2 containers is done by a mobile manipulation equipment consisting essentially of the transfer sluice gate and a transfer container. Subsequent to conditioning, the shipping containers are to be transported to a licensed intermediate storage facility to await their transport to a national radwaste repository. The technical handling tools for the transfer and manipulation are briefly described, as well as the process steps involved, putting emphasis on the detailed description of processes and the accompanying time frame, so that the conditioning task can be incorporated into the work plan of the entire project. The report further presents the EDP concept established for the task, including the required data archivation and documentation. (orig.) [de

On the evolution of morphology of zirconium sponge during reduction and distillation

International Nuclear Information System (INIS)

Kapoor, K.; Padmaprabu, C.; Nandi, D.

2008-01-01

High purity zirconium metal is produced by magnesio-thermic reduction of zirconium tetrachloride followed by vacuum distillation. The reduction process is carried out in a batch giving metal sponge and magnesium chloride in the reduced mass. The sponge is purified to using by vacuum distillation. The morphology of the sponge formed during the reduction and its influence on further processing has significant importance. In the present study, a detailed investigation involving evolution of the morphology of sponge particles and its implication during the vacuum distillation was carried out. The study of the microstructure was done using scanning electron microscopy and X-ray diffraction. It is observed that the nascent sponge formed is highly unstable which transforms to a needle-like morphology almost immediately, which further transforms to rounded and finally to a bulk shape. Faceting of the surface and needle-shape formation were observed in these particles, this is probably due to anisotropy in the surface energy. The morphology of the sponge formed during the reduction influences the distillation process. The fine needle-like shape sponge morphology leads to particle ejection, which is explained to be due to curvature effect. This is responsible for the formation of unwanted mass during distillation. XRD line broadening analysis indicates that the individual sponge particles are free from structural defects (dislocation) and are nearly single crystalline in nature

Reinforcement of the radiative and thermic stresses of the grapevine. Repercussions on yeast surface microflora

International Nuclear Information System (INIS)

Salmon, J.M.; Mailhac, N.; Sauvage, F.X.; Biron, M.J.; Robin, J.P.

1997-01-01

All along the ripening period, the radiative and thermic stresses of the grapevine may be reinforced by the use of a reflective soil cover (aluminized film). Such a treatment leads to repercussions on the berries, on the must composition and finally on the wine quality. During such a preliminary experiment, we demonstrated that the temperature increase and/or the reinforcement of the reflected ultraviolet radiations (measured at 254 nm) at the level of grape berries severely impaired the development of yeast cells at their surfaces. By means of an artificial inoculation of grapes at the beginning of the ripening period with a mixture of four different yeast genera (Saccharomyces cerevisiae, Hanseniaspora uvarum, Pichia fermentans and Schizosaccharomyces pombe), we demonstrated that the repartition of yeast genera amongst this population was affected by the treatment of stocks with the aluminized film: during the experiment presented in this paper, the Saccharomyces genus was favoured. One may consider by extension similar effects resulting from the reflective properties of some natural soils. Such effects may considerably influence the distribution of wild yeast flora during the spontaneous fermentation of musts. If such an hypothesis is confirmed at a local or regional level, it will represent a first significant piece of the definition of one of the aspects of the ''terroir'' effect on the characteristics of wines [fr

Validation of RELAP5 model of experimental test rig simulating the natural convection in MTR research reactors

Energy Technology Data Exchange (ETDEWEB)

Khedr, A.; Abdel-Latif, Salwa H. [Nuclear and Radiological Regulatory Authority, Cairo (Egypt); Abdel-Hadi, Eed A. [Benha Univ., Cairo (Egypt). Shobra Faculty of Engineering; D' Auria, F. [Pisa Univ. (Italy)

2016-03-15

In an attempt to understand the built-up of natural circulation in MTR pool type upward flow research reactors after loss of power, an experimental test rig was built to simulate the loop of natural circulation in MTR reactors. The test rig consisting of two vertically oriented branches, in one of them the core is simulated by two rectangular, electrically heated, parallel channels. The other branch simulates the part of the return pipe that participates in the development of core natural circulation. In the first phase of the work, many experimental runs at different conditions of channel's power and branch's initial temperatures are performed. The channel's coolant and surface temperatures were measured. The measurements and their interpretation were published by the first three authors. In the present work the thermal hydraulic behavior of the test rig is complemented by theoretical analysis using RELAP5 Mod 3.3 system code. The analysis consisting of two parts; in the first part RELAP5 model is validated against the measured values and in the second part some of the other not measured hydraulic parameters are predicted and analyzed. The test rig is typically nodalized and an input dick is prepared. In spite of the low pressure of the test rig, the results show that RELAP5 qualitatively predicts the thermal hydraulic behaviour and the accompanied phenomenon of flow inversion of such facilities. Quantitatively, there is a difference between the predicted and measured values especially the channel's surface temperature. This difference may be return to the uncertainties in initial conditions of experimental runs, the position of the thermocouples which buried inside the heat structure, and the heat transfer package in RELAP5.

Planning model for hydraulic and thermic generation systems expansion under uncertainly conditions and financial restrictions; Modelo de planejamento da expansao de sistemas hidrotermicos sob incertezas e restricoes financeiras

Energy Technology Data Exchange (ETDEWEB)

Gorenstin, B.G.; Costa, J.P. da [CEPEL, Rio de Janeiro, RJ (Brazil); Pereira, M.V.F.; Campodonico, N.M.

1993-12-31

This issue presents a methodology for planning the systems expansion of hydraulic and thermic power generation associated considering several uncertainly factors, such as: demand growing, fuel costs, delays on the work construction, financial restrictions, etc. The solution focus is based on stock optimize techniques, decision analysis. This work is being developed by the Brazilian Electrical Centre (ELETROBRAS) and rely on the Energy Latin-American Organization (OLADE), Development Inter-American Bank (BID), World Bank (BIRD) and International Energy Agency (IAEA) support. An example case with Costa Rica system is also discussed 19 refs., 4 figs., 2 tabs.

Effect of meal frequency on the thermic effect of food in women.

Science.gov (United States)

Kinabo, J L; Durnin, J V

1990-05-01

The effect of meal frequency on the thermic effect of food (TEF), also referred to as dietary induced thermogenesis (DIT), was investigated in eighteen non-obese female subjects. Their metabolic rate before and after consuming the test meal was measured by open circuit indirect calorimetry using the Douglas bag technique, while the subjects were in the resting state (lying down). Eight subjects consumed a high carbohydrate-low fat (HCLF) meal providing 70, 19 and 11 per cent of the energy content from carbohydrate, fat and protein, respectively, and ten other subjects consumed a low carbohydrate-high fat (LCHF) meal providing 24, 65 and 11 per cent of the energy from carbohydrate, fat and protein, respectively. On two separate occasions, each subject consumed the appropriate diet either as one large meal containing 5040 kJ (1200 kcal) or as two smaller meals each containing 2520 kJ (600 kcal). TEF values were calculated for 6 h after the test meal and the mean values after consuming the HCLF meal were 377.0 +/- 30.0 kJ (90 +/- 7.2 kcal) and 381.0 +/- 26.5 kJ (91.0 +/- 6.3 kcal) for the one meal and the two meals, respectively. The mean TEF values for the subjects who consumed the LCHF meal wre 356.0 +/- 23.0 kJ (85.0 +/- 5.5 kcal) and 340 +/- 15.9 kJ (81.0 +/- 3.8 kcal) for the one meal and the two meals, respectively. No significant differences were found between the two feeding regimens (HCLF, P = 0.94; LCHF, P = 0.64) as well as between the compositions (P = 0.57). Thus, meal frequency and meal composition did not seem to influence the TEF.

Coupled 3D neutronics/thermal hydraulics modeling of the SAFARI-1 MTR

International Nuclear Information System (INIS)

Rosenkrantz, Adam; Avramova, Maria; Ivanov, Kostadin; Prinsloo, Rian; Botes, Danniëll; Elsakhawy, Khalid

2014-01-01

Highlights: • Development of 3D coupled neutronics/thermal–hydraulic model of SAFARI-1. • Verification of 3D steady-state NEM based neutronics model for SAFARI-1. • Verification of 3D COBRA-TF based thermal–hydraulic model of SAFARI-1. • Quantification of the effect of correct modeling of thermal–hydraulic feedback. - Abstract: The purpose of this study was to develop a coupled accurate multi-physics model of the SAFARI-1 Material Testing Reactor (MTR), a facility that is used for both research and the production of medical isotopes. The model was developed as part of the SAFARI-1 benchmarking project as a cooperative effort between the Pennsylvania State University (PSU) and the South African Nuclear Energy Corporation (Necsa). It was created using a multi-physics coupling of state of the art nuclear reactor simulation tools, consisting of a neutronics code and a thermal hydraulics code. The neutronics tool used was the PSU code NEM, and the results from this component were verified using the Necsa neutronics code OSCAR-4, which is utilized for SAFARI-1 core design and fuel management. On average, the multiplication factors of the neutronics models agreed to within 5 pcm and the radial assembly-averaged powers agreed to within 0.2%. The thermal hydraulics tool used was the PSU version of COBRA-TF (CTF) sub-channel code, and the results of this component were verified against another thermal hydraulics code, the RELAP5-3D system code, used at Necsa for thermal–hydraulics analysis of SAFARI-1. Although only assembly-averaged results from RELAP5-3D were available, they fell within the range of values for the corresponding assemblies in the comprehensive CTF solution. This comparison allows for the first time to perform a quantification of steady-state errors for a low-powered MTR with an advanced thermal–hydraulic code such as CTF on a per-channel basis as compared to simpler and coarser-mesh RELAP5-3D modeling. Additionally, a new cross section

Non-destructive evaluation methods to improve quality control in low enrichment MTR fuel plate production

International Nuclear Information System (INIS)

Milne, J.M.; Lidington, B.; Hawker, B.M.

1991-01-01

This paper summarises some preliminary non-destructive measurements made recently at the Harwell Laboratory on a prototype low enrichment MTR fuel plate. The measurements were intended to indicate the potential of two different techniques for improving quality control in plate production. Pulse Video Thermography (PVT) is being considered as an alternative to ultrasound transmission measurements for the detection and sizing of lack of thermal bonding between the fuel and the clad layers, either to verify the indications from the established ultrasonic methods before destroying the plate or as a replacement method of inspection. High frequency pulse-echo ultrasonics is being considered for providing maps of clad layer thickness on each side of the plate. The measurements have indicated the potential for both methods, but more work is required, using a test plate containing controlled defects, to establish their capability. (orig.)

Sensitivity analysis of reflector types and impurities in 10 MW MTR type nuclear research reactor

International Nuclear Information System (INIS)

Khattab, K.; Khamis, I.

2007-01-01

The 2-D and 3-D neutronics models for 10 MW nuclear research reactor of MTR type have been developed and presented in this paper. Our results agree very well with the results of seven countries mentioned in the IAEA-TECDOC-233. To study the effect of reflector types on the reactor effective multiplication factor, five types of reflectors such as pure beryllium, beryllium, heavy water, carbon and water are selected for this study. The pure beryllium is found to be the most efficient reflector in this group. The effect of the most important impurities, which exist on the beryllium reflector such as iron, silicon and aluminium on the reactor multiplication factor, have been analyzed as well. It is found that the iron impurity affects the reactor multiplication factor the most compared to silicon and aluminium impurities. (author)

Application of fluorides as reagents in exothermal reducing processes

International Nuclear Information System (INIS)

Solov'ev, A.I.; Maksimov, Yu.M.; Dedov, N.V.; Malyutina, V.M.; Avramchik, A.N.

2002-01-01

Thermodynamic calculations were made and the process of calcium-thermic reduction of titanium and zirconium tetrafluorides and their mixtures was experimentally studied. Compound TiF 4 and its mixture with ZrF 4 in amount no more than 34.3 % are reduced producing a well-formed ingot. When ZrF 4 content is exceeded in the mixture to be reduced as well as during reduction of pure ZrF 4 and the mixture of unseparated rare earth metal fluorides, metal and alloys are produced as embedded particles in solidified slag. Additional heat should be brought to produce qualitative ingot during the reducing process. Qualitative ingots of metal in weight up to 10 kg were produced during calcium-thermic reduction of zirconium and rare earth fluorides with application of high-frequency induction heating [ru

Enrichment reduction calculations for the DIDO reactor. App. B

International Nuclear Information System (INIS)

Constantine, G.; Javadi, M.; Thick, E.

1985-01-01

The possibility has been raised that DIDO/PLUTO type heavy water moderated reactors can be operated with fuel of lower than the 75% enrichment material currently in use with the object of increasing the proliferation resistance of the fuel cycle. This paper sets out to examine the reactor physics aspects of enrichment reductions to 45% and 20% for Harwell's MTR's as part of an IAEA collaborative exercise currently being conducted to examine the topic in a more general way for the whole class of heavy water moderated reactors. The reactor physics tool used at Harwell is WIMSE, the Winfrith Improved Multigroup Scheme, a suite of linked reactor physics codes which has been used extensively for light water, heavy water and graphite moderated thermal reactors. The course of the calculations and the WIMSE modules involved in this study are described briefly

MTR2: a discriminator and dead-time module used in counting systems

International Nuclear Information System (INIS)

Bouchard, J.

2000-01-01

In the field of radioactivity measurement, there is a constant need for highly specialized electronic modules such as ADCs, amplifiers, discriminators, dead-time modules, etc. But sometimes it is almost impossible to find on the market the modules having the performances corresponding to our needs. The purpose of the module presented here, called MTR2 (Module de Temps-mort Reconductible), is to process, in terms of pulse height discrimination and dead-time corrections, the pulses delivered by the detectors used in counting systems. This dead-time, of the extendible type, is triggered by both the positive and negative parts of the incoming pulse and the dead-time corrections are made according to the live-time method. This module, which has been developed and tested at LPRI, can be used alone in simple counting channels or in more complex systems such as coincidence systems. The philosophy governing the choice and the implementation of this type of dead-time as well as the system used for the dead-time corrections is presented. The electronic scheme and the performances are also presented. This module is available in the NIM standard

Monte Carlo simulation of irradiation of MTR fuel plates in the BR2 reactor using a full-scale 3-d model with inclined channels

International Nuclear Information System (INIS)

Kuzminov, V. V; Koonen, E.; Ponsard, B.

2002-01-01

A three-dimensional full-scale Monte Carlo model of the BR2 reactor has been developed for simulation of irradiation conditions of materials and fuel loaded in various irradiation devices. This new reactor model includes a detailed geometrical description of the inclined reactor channels, the irradiation devices loaded in these channels including the materials to be tested/loaded in these devices, the burn-up of the BR2 fuel elements and the poisoning of the beryllium matrix. Recently a benchmark irradiation of new irradiation device for testing and qualification of MTR fuel plates has been performed. For this purpose the detailed irradiation conditions of fuel plates had to be predetermined. Monte Carlo calculations of neutron fluxes and heat load distributions in irradiated MTR fuel plates were performed taking into account the contents of all loaded experimental devices in the reactor channels. A comparison of the calculated and measured values of neutron fluxes and of heat loads in the BR2 reactor is presented in this paper. The comparison is part of the validation process of the new reactor model. It also serves to establish the capability to conduct a fuel plate irradiation program under requested and well- known irradiation conditions. (author)

MTR (Materials Testing Reactors) cores fuel management. Application of a low enrichment reactor for the equilibrium and transitory core calculation

International Nuclear Information System (INIS)

Relloso, J.M.

1990-01-01

This work describes a methodology to define the equilibrium core and a MTR (Materials Testing Reactors) type reactor's fuel management upon multiple boundary conditions, such as: end cycle and permitted maximum reactivities, burn-up extraction and maximun number of movements by rechange. The methodology proposed allows to determine the best options through conceptual relations, prior to a detailed calculation with the core code, reducing the test number with these codes and minimizing in this way CPU cost. The way to better systematized search of transient cores from the first one to the equilibrium one is presented. (Author) [es

Reinforcement of the radiative and thermic stresses of the grape vine. Repercussions on yeast surface microflora

Directory of Open Access Journals (Sweden)

Jean-Michel Salmon

1997-12-01

Full Text Available All along the ripening period, the radiative and thermic stresses of the grapevine may be reinforced by the use of a reflective soil cover (aluminized film. Such a treatment leads to repercussions on the berries, on the must composition and finally on the wine quality. During such a preliminary experiment, we demonstrated that the temperature increase and/or the reinforcement of the reflected ultraviolet radiations (measured at 254 nm at the level of grape berries severely impaired the development of yeast cells at their surfaces. By means of an artificial inoculation of grapes at the beginning of the ripening period with a mixture of four different yeast genera (Saccharomyces cerevisiae, Hanseniaspora uvarum, Pichiafermentans and Schizosaccharomyces pombe, we demonstrated that the repartition of yeast genera amongst this population was affected by the treatment of stocks with the aluminized film: during the experiment presented in this paper, the Saccharomyces genus was favoured. One may consider by extension similar effects resulting from the reflective properties of some natural soils. Such effects may considerably influence the distribution of wild yeast flora during the spontaneous fermentation of musts. If such an hypothesis is confirmed at a local or regional level, it will represent a first significant piece of the definition of one of the aspects of the" terroir" effect on the characteristics of wines.

Sensitivity analysis of reflector types and impurities in a 10 MW MTR type nuclear research reactor

International Nuclear Information System (INIS)

Khattab, K.; Khamis, I.

2008-01-01

The 2-D and 3-D neutronics models for 10 MW nuclear research reactor of MTR type have been developed and presented in this paper. Our results agree very well with the results of seven countries mentioned in the IAEA-TECDOC-233. To study the effect of reflector types on the reactor effective multiplication factor, five types of reflectors such as pure beryllium, beryllium, heavy water, carbon and water are selected for this study. The pure beryllium is found to be the most efficient reflector in this group. The effect of the most important impurities, which exist on the beryllium reflector such as iron, silicon and aluminium on the reactor multiplication factor, have been analyzed as well. It is found that the iron impurity affects the reactor multiplication factor the most compared to silicon and aluminium impurities. (author)

Association study of folate-related enzymes (MTHFR, MTR, MTRR genetic variants with non-obstructive male infertility in a Polish population

Directory of Open Access Journals (Sweden)

Mateusz Kurzawski

2015-03-01

Full Text Available Spermatogenesis is a process where an important contribution of genes involved in folate-mediated one-carbon metabolism is observed. The aim of the present study was to investigate the association between male infertility and the MTHFR (677C > T; 1298A > C, MTR (2756A > G and MTRR (66A > G polymorphisms in a Polish population. No significant differences in genotype or allele frequencies were detected between the groups of 284 infertile men and of 352 fertile controls. These results demonstrate that common polymorphisms in folate pathway genes are not major risk factors for non-obstructive male infertility in the Polish population.

Methodology for thermal-hydraulics analysis of pool type MTR fuel research reactors

International Nuclear Information System (INIS)

Umbehaun, Pedro Ernesto

2000-01-01

This work presents a methodology developed for thermal-hydraulic analysis of pool type MTR fuel research reactors. For this methodology a computational program, FLOW, and a model, MTRCR-IEAR1 were developed. FLOW calculates the cooling flow distribution in the fuel elements, control elements, irradiators, and through the channels formed among the fuel elements and among the irradiators and reflectors. This computer program was validated against experimental data for the IEA-R1 research reactor core at IPEN-CNEN/SP. MTRCR-IEAR1 is a model based on the commercial program Engineering Equation Solver (EES). Besides the thermal-hydraulic analyses of the core in steady state accomplished by traditional computational programs like COBRA-3C/RERTR and PARET, this model allows to analyze parallel channels with different cooling flow and/or geometry. Uncertainty factors of the variables from neutronic and thermalhydraulic calculation and also from the fabrication of the fuel element are introduced in the model. For steady state analyses MTRCR-IEAR1 showed good agreement with the results of COBRA-3C/RERTR and PARET. The developed methodology was used for the calculation of the cooling flow distribution and the thermal-hydraulic analysis of a typical configuration of the IEA-R1 research reactor core. (author)

Concept study for interim storage of research reactor fuel elements in transport and storage casks. Transport and storage licensing procedure for the CASTOR MTR 2 cask. Final report

International Nuclear Information System (INIS)

Weiss, M.

2001-01-01

As a result of the project, a concept was to be developed for managing spent fuel elements from research reactors on the basis of the interim storage technology existing in Germany, in order to make the transition to direct disposal possible in the long term. This final report describes the studies for the spent fuel management concept as well as the development of a transport and storage cask for spent fuel elements from research reactors. The concept analyses were based on data of the fuel to be disposed of, as well as the handling conditions for casks at the German research reactors. Due to the quite different conditions for handling of casks at the individual reactors, it was necessary to examine different cask concepts as well as special solutions for loading the casks outside of the spent fuel pools. As a result of these analyses, a concept was elaborated on the basis of a newly developed transport and storage cask as well as a mobile fuel transfer system for the reactor stations, at which a direct loading of the cask is not possible, as the optimal variant. The cask necessary for this concept with the designation CASTOR trademark MTR 2 follows in ist design the tried and tested principles of the CASTOR trademark casks for transport and interim storage of spent LWR fuel. With the CASTOR trademark MTR 2, it is possible to transport and to place into long term interim storage various fuel element types, which have been and are currently used in German research reactors. The technical development of the cask has been completed, the documents for the transport license as type B(U)F package design and for obtaining the storage license at the interim storage facility of Ahaus have been prepared, submitted to the licensing authorities and to a large degree already evaluated positively. The transport license of the CASTOR trademark MTR 2 has been issued for the shipment of VKTA-contents and FRM II compact fuel elements. (orig.)

The effect of code user and boundary conditions on RELAP calculations of MTR research reactor transient scenarios

Directory of Open Access Journals (Sweden)

Khedr Ahmed

2005-01-01

Full Text Available The safety evaluation of nuclear power and re search reactors is a very important step before their construction and during their operation. This evaluation based on the best estimate calculations requires qualified codes qualified users, and qualified nodalizations. The effect of code users on the RELAP5 results during the analysis of loss of flow transient in MTR research reactors is presented in this pa per. To clarify this effect, two nodalizations for research reactor different in the simulation of the open water surface boundary conditions of the reactor pool have been used. Very different results are obtained with few choices for code users. The core natural circulation flow with the be ginning of core boiling doesn't stop but in creases. The in creasing in the natural circulation flow shifts out the boiling from the core and the clad temperature decreases be low the local saturation temperature.

Long term immersion test of aluminum alloy AA 6061 used for fuel cladding in MTR type reactors

International Nuclear Information System (INIS)

Linardi, Evelina M.; Rodriguez, Sebastian; Haddad, Roberto; Lanzani, Liliana

2009-01-01

In this work we present the results of long term immersion tests performed in the aluminum alloy AA 6061, used for fuel cladding in MTR type reactors. The tests were performed at open circuit potential in high purity water (ρ = 18.2 MΩ.cm) and in 10 -3 M NaCl solution. Two kinds of assemblies were studied: simple sheets and artificial crevices, immersed during 6, 12 and 18 months at room temperature. In both media and both assemblies, the aluminum hydroxide phases crystalline bayerite and bohemite were identified. It was found that a kind of localized attack named alkaline attack occurs around the iron-rich intermetallics. These particles were confirmed to control the corrosion of the AA 6061 alloy in an aerated medium. Immersion times for up to 18 months did not increase the oxide growth or the alkaline attack on the AA 6061 alloy. (author)

MTHFR C677T and MTR A2756G polymorphisms and the homocysteine lowering efficacy of different doses of folic acid in hypertensive Chinese adults

Directory of Open Access Journals (Sweden)

Qin Xianhui

2012-01-01

Full Text Available Abstract Background This study aimed to investigate if the homocysteine-lowering efficacy of two commonly used physiological doses (0.4 mg/d and 0.8 mg/d of folic acid (FA can be modified by individual methylenetetrahydrofolate reductase (MTHFR C677T and/or methionine synthase (MTR A2756G polymorphisms in hypertensive Chinese adults. Methods A total of 480 subjects with mild or moderate essential hypertension were randomly assigned to three treatment groups: 1 enalapril only (10 mg, control group; 2 enalapril-FA tablet [10:0.4 mg (10 mg enalapril combined with 0.4 mg of FA, low FA group]; and 3 enalapril-FA tablet (10:0.8 mg, high FA group, once daily for 8 weeks. Results After 4 or 8 weeks of treatment, homocysteine concentrations were reduced across all genotypes and FA dosage groups, except in subjects with MTR 2756AG /GG genotype in the low FA group at week 4. However, compared to subjects with MTHFR 677CC genotype, homocysteine concentrations remained higher in subjects with CT or TT genotype in the low FA group (P P P = 0.005, but not in the low FA group (CC 9.9% vs. TT 11.2%, P = 0.989. Conclusions This study demonstrated that MTHFR C677T polymorphism can not only affect homocysteine concentration at baseline and post-FA treatment, but also can modify therapeutic responses to various dosages of FA supplementation.

Electrochemical investigation of thermically treated graphene oxides as electrode materials for vanadium redox flow battery

International Nuclear Information System (INIS)

Di Blasi, O.; Briguglio, N.; Busacca, C.; Ferraro, M.; Antonucci, V.; Di Blasi, A.

2015-01-01

Highlights: • Graphene oxide is synthesized at high temperatures in a reducing environment. • Treated graphene oxide-based electrodes are prepared by the wet impregnation method. • Electrochemical performance is evaluated as a function of the physico-chemical properties. - Abstract: Thermically treated graphene oxides (TT-GOs) are synthesized at different temperatures, 100 °C, 150 °C, 200 °C and 300 °C in a reducing environment (20% H 2 /He) and investigated as electrode materials for vanadium redox flow battery (VRFB) applications. The treated graphene oxide-based electrodes are prepared by the wet impregnation method using carbon felt (CF) as support. The main aim is to achieve a suitable distribution of the dispersed graphene oxides on the CF surface in order to investigate the electrocatalytic activity for the VO 2+ /VO 2 + and V 2+ /V 3+ redox reactions in the perspective of a feasible large area electrodes scale-up for battery configuration of practical interest. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) are carried out in a three electrode half-cell to characterize the electrochemical properties of the TT-GO-based electrodes. Physico-chemical characterizations are carried out to corroborate the electrochemical results. The TT-GO sample treated at 100 °C (TT-GO-100) shows the highest electrocatalytic activity in terms of peak to peak separation (ΔE = 0.03 V) and current density intensity (∼0.24 A cm −2 at 30 mV/s) both toward the VO 2+ /VO 2 + and V 2+ /V 3+ redox reactions. This result is correlated to the presence of hydroxyl (−OH) and carboxyl (−COOH) species that act as active sites. A valid candidate is individuated as effective anode and cathode electrode in the perspective of electrodes scale-up for battery configuration of practical interest

Prediction, analysis and solution of flow inversion phenomenon in a typical MTR reactor with upward core cooling

International Nuclear Information System (INIS)

El-Morshedy, Salah El-Din

2010-01-01

Research reactors of power greater than 20 MW are usually designed to be cooled with upward coolant flow direction inside the reactor core. This is mainly to prevent flow inversion problems following a pump coast down. However, in some designs and under certain operating conditions, flow inversion phenomenon is predicted. In the present work, the best-estimate Material Testing Reactors Thermal-Hydraulic Analysis program (MTRTHA) is used to simulate a typical MTR reactor behavior with upward cooling under a hypothetical case of loss of off-site power. The flow inversion phenomenon is predicted under certain decay heat and/or pool temperature values below the design values. The reactor simulation under loss of off-site power is performed for two cases namely; two-flap valves open and one flap-valve fails to open. The model results for the flow inversion phenomenon prediction is analyzed and a solution of the problem is suggested. (orig.)

The reprocessing of irradiated MTR fuel and the nuclear material accountancy - Dounreay, UKAEA

Energy Technology Data Exchange (ETDEWEB)

Barrett, T.R.; Harrison, R. [UKAEA, Nuclear Materials Control Dep., Dounreay (United Kingdom)

1997-07-01

The reprocessing of irradiated HEU MTR fuel is a sensible part of a safeguards regime. It brings together fuel otherwise scattered around the world into a concerted accountancy and protection arrangement. From a nuclear material accountants view the overall accountancy performance has been excellent. While investigations have been required for a few individual MUFs or trends, very little effort has required to be expended by the Nuclear Materials Control Department. That is a definition of a 'good plant'; it operates, measures and records input and output streams, and then the accountancy falls into place. As identified in this paper, the accountancy of the nuclear material processed in the plant is well founded and sound. The accountancy results over several decades confirm the adequacy of the safeguards arrangements at Dounreay. The processing makes good commercial sense and meets the current philosophy of recycling valuable resource materials. The risk of operating the full fuel cycle are less than those of extended storage of irradiated fuel at disparate diverse locations. The reprocessing at Dounreay accords with all of these philosophies. The assessed risk is at a very low level, well within published UK HSE 'tolerability of risk' regulatory guidelines. The impact of the operations are similarly low within the guidelines, for the operators and for the general public. (author)

The reprocessing of irradiated MTR fuel and the nuclear material accountancy - Dounreay, UKAEA

International Nuclear Information System (INIS)

Barrett, T.R.; Harrison, R.

1997-01-01

The reprocessing of irradiated HEU MTR fuel is a sensible part of a safeguards regime. It brings together fuel otherwise scattered around the world into a concerted accountancy and protection arrangement. From a nuclear material accountants view the overall accountancy performance has been excellent. While investigations have been required for a few individual MUFs or trends, very little effort has required to be expended by the Nuclear Materials Control Department. That is a definition of a 'good plant'; it operates, measures and records input and output streams, and then the accountancy falls into place. As identified in this paper, the accountancy of the nuclear material processed in the plant is well founded and sound. The accountancy results over several decades confirm the adequacy of the safeguards arrangements at Dounreay. The processing makes good commercial sense and meets the current philosophy of recycling valuable resource materials. The risk of operating the full fuel cycle are less than those of extended storage of irradiated fuel at disparate diverse locations. The reprocessing at Dounreay accords with all of these philosophies. The assessed risk is at a very low level, well within published UK HSE 'tolerability of risk' regulatory guidelines. The impact of the operations are similarly low within the guidelines, for the operators and for the general public. (author)

The obtainment of highly concentrated uranium pellets for plate type (MTR) fuel by dispersion of uranium aluminides in aluminium

International Nuclear Information System (INIS)

Morando, R.A.; Raffaeli, H.A.; Balzaretti, D.E.

1980-01-01

The use of the intermetallic UAl 3 for manufacturing plate type MTR fuel with 20% U 235 enriched uranium and a density of about 20 kg/m 3 is analyzed. The technique used is the dispersion of UAl 3 particles in aluminium powder. The obtainment of the UAl 3 intermetallic was performed by fusion in an induction furnace in an atmosphere of argon at a pressure of 0.7 BAR (400 mm) using an alumina melting pot. To make the aluminide powder and attain the wished granulometry a cutting and a rotating crusher were used. Aluminide powders of different granulometries and different pressures of compactation were analyzed. In each case the densities were measured. The compacts were colaminated with the 'Picture Frame' technique at temperatures of 490 and 0 deg C with excellent results from the manufacturing view point. (M.E.L.) [es

Nuclear data uncertainties propagation methods in Boltzmann/Bateman coupled problems: Application to reactivity in MTR

International Nuclear Information System (INIS)

Frosio, Thomas; Bonaccorsi, Thomas; Blaise, Patrick

2016-01-01

Highlights: • Hybrid methods are developed for uncertainty propagation. • These methods take into account the flux perturbation in the coupled problem. • We show that OAT and MC methods give coherent results, except for Pearson correlations. • Local sensitivity analysis is performed. - Abstract: A novel method has been developed to calculate sensitivity coefficients in coupled Boltzmann/Bateman problem for nuclear data (ND) uncertainties propagation on the reactivity. Different uncertainty propagation methodologies, such as One-At-a-Time (OAT) and hybrid Monte-Carlo/deterministic methods have been tested and are discussed on an actual example of ND uncertainty problem on a Material Testing Reactor (MTR) benchmark. Those methods, unlike total Monte Carlo (MC) sampling for uncertainty propagation and quantification (UQ), allow obtaining sensitivity coefficients, as well as Bravais–Pearson correlations values between Boltzmann and Bateman, during the depletion calculation for global neutronics parameters such as the effective multiplication coefficient. The methodologies are compared to a pure MC sampling method, usually considered as the “reference” method. It is shown that methodologies can seriously underestimate propagated variances, when Bravais–Pearson correlations on ND are not taken into account in the UQ process.

Selective separation of actinides and long-lived fission products from 1 AW MTR liquid waste: pilot plant tests part II

International Nuclear Information System (INIS)

Grossi, G.; Marrocchelli, A.; Pietrelli, L.; Calle, C.; Gili, M.; Luce, A.; Troiani, F.

1992-01-01

In Italy there are some 120 m 3 of liquid High-level radioactive Wastes coming from MTR, Candu and EPK River fuel elements reprocessing. These High-level radioactive wastes contain a large amount of chemicals and inert salts together with cesium, strontium and transuranium elements. Transuranium elements and strontium are separated from the inert salts by means of a selective precipitation while Cesium is adsorbed on synthetic zeolithes (AZE Process) or precipitated with sodium Tetraphenyl borate (NaTPB) (ATE process). The benchscale experiments have confirmed the feasibility of selective separation processes and have showed that decontamination efficiency for strontium, plutonium and cesium were, respectively, 100, 5000 and 1000. This second part of the CEC final report describes Searse pilot plant tests with cold experiments. 37 Refs.; 17 Figs.; 16 Tabs

Thermal-hydraulic safety aspects related to irradiation capabilities in MTR reactors

International Nuclear Information System (INIS)

Khedr, A.

2009-01-01

MTR research reactor such as ETRR-2 is an open pool type reactor that has a capability for irradiation into a number of irradiation boxes (IBs) installed at different positions on a separate grid called irradiation grid (I G). The I B has a lower removable plug to open or close its lower nozzle according to the I B is used or not.Increasing the used No. of I Bs in irradiation means that a valuable change in the flow distribution on the I G will occur. This paper is focused on the optimum number of I Bs that could be used without deterioration the cooling of I G components and avoiding the formation of hot spots. RELAP5 system code is used for thermal hydraulic analysis of the I G cooling system. Mathematical models and fortran program is developed to calculate the heat distribution in the I G components and the equivalent nozzle diameter that compensate the I B pressure drop due to the irradiated material (I M). This equivalent diameter simulates the used I B nozzle in the RELAP5 input deck. The results show that, the internal flow into the I Bs has significant effect on the coolability of the I G components. The number of I Bs that can be used is inversely proportional with the reactor power, the IM's void fraction and directly proportional with the PCS flow rate. Different cases of operating power and void fraction at two values for PCS flow are studied. In all of the cases considered limited number of the I Bs is permissible to use in order to avoid the excessive heating of the I G components

Rules for the licensing of new experiments in BR2: application to the test irradiation of new MTR-fuels

International Nuclear Information System (INIS)

Joppen, F.

2000-01-01

New types of MTR fuel elements are being developed and require a qualification before routine operation could be authorized. During the test irradiation the new fuel elements .are considered as experimental devices and their irradiation is allowed according to the procedures for experiments. Authorization is based on the advice .of a consultative committee on experiments. This procedure is valid as long as the irradiation is covered by the actual reactor license. An additional license or an amendment is only required if due to the experiment the risk for the workers or the environment is increased in a significant way. A few experimental fuel plates loaded in the primary loop of the reactor will not increase this risk. The source term for potential radioactive releases remains more or less the same. The probability for an accident can be limited by restricting the heat flux and surface temperature. (author)

Impact of phenylketonuria type meal on appetite, thermic effect of feeding and postprandial fat oxidation.

Science.gov (United States)

Alfheeaid, Hani; Gerasimidis, Konstantinos; Năstase, Ana-Maria; Elhauge, Mie; Cochrane, Barbara; Malkova, Dalia

2017-03-08

Dietary management of phenylketonuria (PKU) requires the replacement of natural protein-containing foods with special low protein foods. The effect of a PKU type diet on factors contributing to energy balance requires investigation. To investigate the impact of a PKU type meal on appetite ratings, gut appetite hormones, thermic effect of feeding (TEF) and fat oxidation. Twenty-three healthy adults (mean ± SD age: 24.3 ± 5.1 years; BMI: 22.4 ± 2.5 kg/m 2 ) participated in a randomized, crossover design study. Each participant conducted two (PKU and Control) experimental trials which involved consumption of a PKU type meal and protein substitute drink or an isocaloric and weight matched ordinary meal and protein-enriched milk. Appetite, metabolic rate, fat oxidation measurements and blood collections were conducted for the duration of 300 min. On the completion of the measurements ad libitum buffet dinner was served. Responses of appetite ratings, plasma concentrations of GLP-1 and PYY (P > 0.05, trial effect, two-way ANOVA) and energy intake during ad libitum buffet dinner (P > 0.05, paired t-test) were not significantly different between the two trials. The TEF (PKU, 10.2 ± 1.5%; Control, 13.2 ± 1.0%) and the total amount of fat oxidized (PKU, 18.90 ± 1.10 g; Control, 22.10 ± 1.10 g) were significantly (P meal period. Consumption of a meal composed of special low protein foods has no detrimental impact on appetite and appetite hormones but produces a lower TEF and postprandial fat oxidation than an ordinary meal. These metabolic alterations may contribute to the increased prevalence of obesity reported in patients with PKU on contemporary dietary management. The trial has been registered in ClinicalTrials as NCT02440932. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Optic nerve magnetisation transfer ratio after acute optic neuritis predicts axonal and visual outcomes.

Directory of Open Access Journals (Sweden)

Yejun Wang

Full Text Available Magnetisation transfer ratio (MTR can reveal the degree of proton exchange between free water and macromolecules and was suggested to be pathological informative. We aimed to investigate changes in optic nerve MTR over 12 months following acute optic neuritis (ON and to determine whether MTR measurements can predict clinical and paraclinical outcomes at 6 and 12 months. Thirty-seven patients with acute ON were studied within 2 weeks of presentation and at 1, 3, 6 and 12 months. Assessments included optic nerve MTR, retinal nerve fibre layer (RNFL thickness, multifocal visual evoked potential (mfVEP amplitude and latency and high (100% and low (2.5% contrast letter acuity. Eleven healthy controls were scanned twice four weeks apart for comparison with patients. Patient unaffected optic nerve MTR did not significantly differ from controls at any time-point. Compared to the unaffected nerve, affected optic nerve MTR was significantly reduced at 3 months (mean percentage interocular difference = -9.24%, p = 0.01, 6 months (mean = -12.48%, p<0.0001 and 12 months (mean = -7.61%, p = 0.003. Greater reduction in MTR at 3 months in patients was associated with subsequent loss of high contrast letter acuity at 6 (ρ = 0.60, p = 0.0003 and 12 (ρ = 0.44, p = 0.009 months, low contrast letter acuity at 6 (ρ = 0.35, p = 0.047 months, and RNFL thinning at 12 (ρ = 0.35, p = 0.044 months. Stratification of individual patient MTR time courses based on flux over 12 months (stable, putative remyelination and putative degeneration predicted RNFL thinning at 12 months (F(2,32 = 3.59, p = 0.02. In conclusion, these findings indicate that MTR flux after acute ON is predictive of axonal degeneration and visual disability outcomes.

Methodological study for management of the generated effluents during MTR-type fuel elements fabrication at IPEN/CNEN-SP plant

International Nuclear Information System (INIS)

Tanzillo Santos, Glaucia Regina

2008-01-01

Full text: The aim of the industrial activities success, front to a more and more informed and demanding society and to a more and more competitive market demands an environmental administration policy which doesn't limit itself to assist the legislation but anticipate and prevent, in a responsible way, possible damages to the environment. One of the main programs of the Institute of Energetic and Nuclear Research of the National Commission of Nuclear Energy located in Brazil, through the Center of Nuclear Fuel -CCN- is to manufacture MTR-type fuel elements using low-enrichment uranium (20 wt % 235 U), to supply its IEA-R1 research reactor. Integrated in this program, this work aims at well developing and assuring a methodology to implant an environment, health and safety policy, foreseeing its management with the use of detailed data reports and through the adoption of new tools for improving the management, in order to fulfil the applicable legislation and accomplish all the environmental, operational and works aspects. The applied methodology for the effluents management comprises different aspects, including the specific environmental legislation of a country, main available effluents treatment techniques, process flow analyses from raw materials and intakes to products, generated effluents, residuals and emissions. Data collections were accomplished for points gathering and tests characterization, classification and compatibility of the generated effluents and their eventual environmental impacts. This study aims to implant the sustainability concept in order to guarantee access to financial resources, allowing cost reduction, maximizing long-term profits, preventing and reducing environmental accident risks and stimulating both the attraction and the keeping of a motivated manpower. Work on this project has already started and, even though many technical actions have not still ended, the results have being extremely valuable. These results can already give to

MTR and PWR/PHWR in-pile loop safety in integration with the operation of multipurpose reactor - GAS

International Nuclear Information System (INIS)

Suharno; Aji, Bintoro; Sugiyanto; Rohman, Budi; Zarkasi, Amin S.; Giarno

1998-01-01

MTR and PWR/PHWR In-Pile Loop safety analysis in integration with the operation of Multipurpose Reactor - Gas has been carried out and completed. The assessment is emphasized on the function of the interface systems from the dependence of the operation and the evaluation to the possibility of leakage or failure of the in-pile part inside the reactor pool and reactor core. The analysis is refers to the logic function of the interface system and the possibility of leakage or failure of the in-pile part inside reactor pool and reactor core to consider the integrity of the core qualitatively. The results show that in normal and in transient conditions , the interface system meet the function requirement in safe integrated operation of in-pile loop and reactor. And the results of the possibility analysis of the leakage shows that the possibility based on mechanically assessment is very low and the impact to core integrity is nothing or can be eliminated. The possible position for leakage is on the flen on which one meter above the top level of the core, therefore no influence of leakage to the core

Fission yields and cross section uncertainty propagation in Boltzmann/Bateman coupled problems: Global and local parameters analysis with a focus on MTR

International Nuclear Information System (INIS)

Frosio, Thomas; Bonaccorsi, Thomas; Blaise, Patrick

2016-01-01

Highlights: • Nuclear data uncertainty propagation for neutronic quantities in coupled problems. • Uncertainties are detailed for local isotopic concentrations and local power maps. • Correlations are built between space areas of the core and for different burnups. - Abstract: In a previous paper, a method was investigated to calculate sensitivity coefficients in coupled Boltzmann/Bateman problem for nuclear data (ND) uncertainties propagation on the reactivity. Different methodologies were discussed and applied on an actual example of multigroup cross section uncertainty problem for a 2D Material Testing Reactor (MTR) benchmark. It was shown that differences between methods arose from correlations between input parameters, as far as the method enables to take them into account. Those methods, unlike Monte Carlo (MC) sampling for uncertainty propagation and quantification (UQ), allow obtaining sensitivity coefficients, as well as correlations values between nuclear data, during the depletion calculation for the parameters of interest. This work is here extended to local parameters such as power factors and isotopic concentrations. It also includes fission yield (FY) uncertainty propagation, on both reactivity and power factors. Furthermore, it introduces a new methodology enabling to decorrelate direct and transmutation terms for local quantities: a Monte-Carlo method using built samples from a multidimensional Gaussian law is used to extend the previous studies, and propagate fission yield uncertainties from the CEA’s COMAC covariance file. It is shown that, for power factors, the most impacting ND are the scattering reactions, principally coming from 27 Al and (bounded hydrogen in) H 2 O. The overall effect is a reduction of the propagated uncertainties throughout the cycle thanks to negatively correlated terms. For fission yield (FY), the results show that neither reactivity nor local power factors are strongly affected by uncertainties. However, they

Comparison Of ²⁵²Cf Time Correlated Induced Fisssion With AmLi Induced Fission On Fresh MTR Research Reactor Fuel

Energy Technology Data Exchange (ETDEWEB)

Joshi, Jay Prakash [Los Alamos National Laboratory

2017-03-30

the AmLi source. In this work, two MTR fuel assemblies varying both in size and number of fuel plates were measured using ²⁵²Cf and AmLi active interrogation sources. This paper analyzes time correlated induced fission (TCIF) from fresh MTR fuel assemblies due to ²⁵²Cf and AmLi active interrogation sources.

The Assessment of Structural Changes in MS Plaques and Normal Appearing White Matter Using Quantitative Magnetization Transfer Imaging (MTI

Directory of Open Access Journals (Sweden)

Masoomeh Fooladi

2007-12-01

Full Text Available Introduction: Multiple sclerosis (MS is a demyelinating disease of the central nervous system (CNS, affecting mostly young people at a mean age of 30 years. Magnetic resonance imaging (MRI is one of the most specific and sensitive methods in diagnosing and detecting the evolution of multiple sclerosis disease. But it does not have the ability to differentiate between distinct histopathological heterogeneities that occur in MS lesions and brain tissue.Quantitative magnetization transfer imaging (qMTI is a relatively new MRI technique which can be used to examine the pathological processes of the brain parenchyma which occur in MS patients.This quantitative MRI technique can provide more complete information about the extent and nature of the brain tissue destruction in multiple sclerosis, which cannot be detected by conventional MRI. Material and Methods: In this study, twelve patients with relapsing-remitting MS and twelve healthy control subjects underwent conventional MR imaging including: T2-FSE, T1-SE and FLAIR sequences as well as quantitative magnetization transfer imaging. All the focal lesions were identified on T2-weighted images and were classified according to their signal hypointensity on T1-weighted scans. The white matter and MS lesions were segmented using a semi-automated system. MT ratio (MTR histogram analysis was performed for the brain white matter and the average MTR value was calculated for the classified MS lesions. Results: A significant reduction was found in MTR value of the normal appearing white matter (NAWM in patients with relapsing-remitting MS, suggesting that MS is a more diffuse disease, affecting the whole brain tissue. A wide range changes in MTR values can be observed in MS lesions. MTR reduction is correlated with the degree of lesion hypointensity on T1-weighted scans. The lower MTR values of lesions that appear progressively more hypointense on T1-weigted images reflect varying degrees of demyelination and

Experience with the transport and storage casks CASTOR (registered) MTR 2 for spent nuclear fuel assemblies from research reactors

Energy Technology Data Exchange (ETDEWEB)

Jack, Allen; Rettenbacher, Katharina; Skrzyppek, Juergen [GNS Gesellschaft fuer Nuklear-Service mbH, Essen (Germany)

2011-07-01

The CASTOR (registered) MTR 2 cask was designed and manufactured by the company GNS during the 1990's for the transport and interim storage of spent nuclear fuel assemblies from various types of research reactors. Casks of this type have been used at the VKTA Research Centre in Rossendorf near Dresden, Germany as well as at the European Commission's Joint Research Centre at Petten and at the HOR reactor at Delft in the Netherlands. A total of 24 units have been used for the functions of transport and storage with various spent fuel types (VVER, HFR-HEU, and HOR-HEU) for more than ten years now. This type of packaging for radioactive material is a member of the CASTOR (registered) family of spent nuclear fuel casks used worldwide. Over 1000 units are loaded and in storage in Europe, Asia, Africa and North America. This paper presents the experience from the use of the casks for transport and storage in the past, as well as the prospects for the future. (author)

Assessment of material and technical resources of crop production technologies

Directory of Open Access Journals (Sweden)

V. M. Beylis

2017-01-01

Full Text Available The author explains the general principles of influence of the material and technical resources (MTR on performance and efficiency of the main technological operations in crop production. Various technologies from the point of view of MTR expenses were estimated. The general tendencies in development of crop production technologies were revealed. The distribution of costs of materials and equipment to perform a variety of agricultural activities was determined. Cost indicators should be a guide in the search of innovative technological processes and working elements of agricultural machins. The greatest values of expenses of work, fuel, metal, and also, money where found. The concepts allowing to provide costs production reduction were formulated. To achieve the maximum productivity with the minimum expenses, the perspective calculations shoul be based on «progressive» agrotechnologies. When determining progressive agrotechnology it is necessary on reasonable grounds to approach indicators of crop productivity in various agrozones and regions of the country. For an assessment of efficiency of MTR by crop production and ensuring decrease in resource intensity of agricultural products by search and use of essentially new technologies for energy saving when performing agricultural operations, an integrated percentage indicator of comparison of progressive technologies with the applied ones was developed. MTR at application of new progressive crop production technologies by integrated percentage index were estimated. This indicator can be used for definition of efficiency of MTR. Application of the offered technique will promote an effective assessment of MTR, decrease in resource intensity by search and developments of essentially new technologies of performance of operations in crop production.

Determination of the burn-up in fuels of the MTR type by means of gamma spectroscopy with crystal of INa(Tl)

International Nuclear Information System (INIS)

Kestelman, A.J.

1988-01-01

One of the responsibilities of the Laboratory of Analysis by Neutronic Activation of the RA-6 reactor is to determine the burn-up in fuels of the MTR type. In order to gain experience, up to the arrival of the hyperpure Germanium detector (HPGe) to be used in normal operation, preliminary measurements with a crystal of INa(Tl) were made. The fuel elements used are originated in the RA-3 reactor, with a decay superior to the thirteen years. For this reason, the unique visible photoelectric peak is the one of Cs-137, owing to the low resolution of the INa(Tl). After preliminary measurements, the profiles of burn-up, rectified by attenuation, were measured. Once the efficiency of the detector was determined, the calculation of the burn-up was made; for the element No. 144, a value of 21.6 ± 2.9 g was obtained to be compared with the value 21.9 g which was the evaluation made by the operators. (Author) [es

MTR spent fuel back-end - Cogema's long-term commitment

International Nuclear Information System (INIS)

Thomasson, J.

1998-01-01

MTR spent fuel back end has been subject to many reversal and uncertainties in the past 10 years. Until the end of 1988, US obligated materials were subject to the Off site Fuels Policy (OFP). Under this policy, spent fuels were returned to USA, and were reprocessed there. This OFP took end the 31th of December 1988, and Research Reactor's operators had to implement others solutions: On site storage or Reprocessing in Europe. Meanwhile the RERTR Program was leading to a new LEU fuel to replace HEU aluminide. This new silicide fuel has one main drawback: it cannot be reprocessed in working plants without some process main line modifications. Fortunately, a new Research Reactors spent fuels return policy has been set up by the US in the early 1996. This new policy applies to all reactors converted or that have agreed to convert to LEU, and reactors operating with HEU for which no suitable LEU is available. It covers all the spent fuels discharged until 2006/05/12. But after that period of time, each reactor will be fully responsible for its spent fuels. Since the end of 1996, COGEMA is proposing reprocessing services for Aluminides spent fuels, based on the La Hague capability. This COGEMA answer is for the long term, as the La Hague plant has a good load for the coming years, including the first decade of the next century. Further, this activity benefits from a strong R and D support, that allowed fulfilling the evolutive needs of our customers, and gives us the ability to adapt the plant to the future market. Taking advantage of this flexibility, COGEMA offers Research Reactors' operators a long-term commitment. Already two reactors' operators have chosen to contract with COGEMA for the whole life of their reactors. The contracts execution is under progress and the first transportation will take place soon. Beside today's services, COGEMA is involved in R and D activities to support new fuels development enhancing present LEU performances and having the ability to

c-Type cytochrome-dependent formation of U(IV nanoparticles by Shewanella oneidensis.

Directory of Open Access Journals (Sweden)

Matthew J Marshall

2006-09-01

Full Text Available Modern approaches for bioremediation of radionuclide contaminated environments are based on the ability of microorganisms to effectively catalyze changes in the oxidation states of metals that in turn influence their solubility. Although microbial metal reduction has been identified as an effective means for immobilizing highly-soluble uranium(VI complexes in situ, the biomolecular mechanisms of U(VI reduction are not well understood. Here, we show that c-type cytochromes of a dissimilatory metal-reducing bacterium, Shewanella oneidensis MR-1, are essential for the reduction of U(VI and formation of extracellular UO(2 nanoparticles. In particular, the outer membrane (OM decaheme cytochrome MtrC (metal reduction, previously implicated in Mn(IV and Fe(III reduction, directly transferred electrons to U(VI. Additionally, deletions of mtrC and/or omcA significantly affected the in vivo U(VI reduction rate relative to wild-type MR-1. Similar to the wild-type, the mutants accumulated UO(2 nanoparticles extracellularly to high densities in association with an extracellular polymeric substance (EPS. In wild-type cells, this UO(2-EPS matrix exhibited glycocalyx-like properties and contained multiple elements of the OM, polysaccharide, and heme-containing proteins. Using a novel combination of methods including synchrotron-based X-ray fluorescence microscopy and high-resolution immune-electron microscopy, we demonstrate a close association of the extracellular UO(2 nanoparticles with MtrC and OmcA (outer membrane cytochrome. This is the first study to our knowledge to directly localize the OM-associated cytochromes with EPS, which contains biogenic UO(2 nanoparticles. In the environment, such association of UO(2 nanoparticles with biopolymers may exert a strong influence on subsequent behavior including susceptibility to oxidation by O(2 or transport in soils and sediments.

Earth thermics

Energy Technology Data Exchange (ETDEWEB)

Ueda, M

1960-01-01

The thermodynamics of the Earth are described, including terrestrial heat flow, internal temperatures and thermal history. The value of the geothermal gradient has been considered to be 3/sup 0/C/100 m but measured values are slightly different. The values of terrestrial heat flow are relatively constant and are calculated be about 2.3 x 10 to the minus 6 cal/cm/sup 2/ sec (2.3 HFU). The Earth's internal temperature can be calculated from the adiabatic temperature gradient of adiabatic expansion. Using Simon's equation No. 9, a value of 2100-2500/sup 0/C is obtained, this is much lower than it was previously thought to be. The value of 2.3 HFU can easily be obtained from this internal temperature figure.

Nuclear fuel cycle head-end enriched uranium purification and conversion into metal

International Nuclear Information System (INIS)

Bonini, A.; Cabrejas, J.; Lio, L. de; Dell'Occhio, L.; Devida, C.; Dupetit, G.; Falcon, M.; Gauna, A.; Gil, D.; Guzman, G.; Neuringer, P.; Pascale, A.; Stankevicius, A.

1998-01-01

The CNEA (Comision Nacional de Energia Atomica - Argentina) operated two facilities at the Ezeiza Atomic Center which supply purified enriched uranium employed in the production of nuclear fuels. At one of those facilities, the Triple Height Laboratory scraps from the production of MTR type fuel elements (mainly out of specification U 3 O 8 plates or powder) are purified to nuclear grade. The purification is accomplished by a solvent extraction process. The other facility, the Enriched Uranium Laboratory produces 90% enriched uranium metal to be used in Mo 99 production (originally the uranium was used for the manufacture of MTR fuel elements made of aluminium-uranium alloy). This laboratory also provided metallic uranium with a lower enrichment (20%) for a first uranium-silicon testing fuel element, and in the near future it is going to recommence 20% enriched uranium related activities in order to provide the metal for the silicon-based fuel elements production (according to the policy of enrichment reduction for MTR reactors). (author)

CFD investigation of flow inversion in typical MTR research reactor undergoing thermal-hydraulic transients

International Nuclear Information System (INIS)

Salama, Amgad

2011-01-01

Highlights: → The 3D, CFD simulation of FLOFA accident in the generic IAEA 10 MW research reactor is carried out. → The different flow and heat transfer mechanisms involved in this process were elucidated. → The transition between these mechanisms during the course of FLOFA is discussed and investigated. → The interesting inversion process upon the transition from downward flow to upward flow is shown. → The temperature field and the friction coefficient during the whole transient process were shown. - Abstract: Three dimensional CFD full simulations of the fast loss of flow accident (FLOFA) of the IAEA 10 MW generic MTR research reactor are conducted. In this system the flow is initially downward. The transient scenario starts when the pump coasts down exponentially with a time constant of 1 s. As a result the temperatures of the heating element, the clad, and the coolant rise. When the flow reaches 85% of its nominal value the control rod system scrams and the power drops sharply resulting in the temperatures of the different components to drop. As the coolant flow continues to drop, the decay heat causes the temperatures to increase at a slower rate in the beginning. When the flow becomes laminar, the rate of temperature increase becomes larger and when the pumps completely stop a flow inversion occurs because of natural convection. The temperature will continue to rise at even higher rates until natural convection is established, that is when the temperatures settle off. The interesting 3D patterns of the flow during the inversion process are shown and investigated. The temperature history is also reported and is compared with those estimated by one-dimensional codes. Generally, very good agreement is achieved which provides confidence in the modeling approach.

A GIS TOOL TO EVALUATE THE SPATIAL EVOLUTION OF HYDRO-THERMIC FEATURES DURING GROWING SEASON OF VEGETABLE CROPS IN ELBE RIVER LOWLAND (POLABI

Directory of Open Access Journals (Sweden)

VERA POTOP

2012-11-01

Full Text Available A GIS tool to evaluate the spatial evolution of hydro-thermic features during growing season of vegetable crops in Elbe River lowland (Polabi. This article presents the results of the first study on combined mezoclimatological, microclimatological and topographical tools for evaluating precision farming in the growth of vegetable crops in the Elbe River lowland (Polabi region from the Czech Republic. We assess the variability of basically climatological characteristics in relation to topographic characteristics at the regional (Polabi and local (agricultural farm scales. At regional scale, interpolation approach is based on local linear regression and universal kriging interpolation. At local scale, two conventional interpolation methods, spline and local ordinary kriging with a Gaussian model variance across the fields, were applied. The local spline interpolators have been used in developing digital elevation models (DEMs and to determine the slope angle inclination of vegetable fields. The DEMs of the vegetable crops fields was developed at a 10 m x 10 m resolution based on elevation data collected in the field by a hand-held RTK- Global Positioning System receiver. This tool allowed the distinction of microclimatic conditions that produce altitude-slope-related patterns of the spatial-temporal distribution of the basic meteorological elements during growing season of vegetable crops. The effect of slope on diurnal extreme temperatures in the vegetable cropped field conditions was more pronounced than that of elevation. Accordingly to developed maps, the warmest and longest duration of sunshine, and the least precipitation totals during growing season occurred in the middle part of Polabi.

The Jules Horowitz Reactor (JHR), a European Material Testing Reactor (MTR), with extended experimental capabilities

International Nuclear Information System (INIS)

Ballagny, A.; Bergamaschi, Y.; Bouilloux, Y.; Bravo, X.; Guigon, B.; Rommens, M.; Tremodeux, P.

2003-01-01

The Jules Horowitz Reactor (JHR) is the European MTR (Material Testing Reactor) designed to provide, after 2010, the necessary knowledge for keeping the existing power plants in operation and to design innovative reactors types with new objectives such as: minimizing the radioactive waste production, taking into account additional safety requirements, preventing risks of nuclear proliferation. To achieve such an ambitious objective. The JHR is designed with a high flexibility in order to satisfy the current demand from European industry, research and to be able to accommodate future requirements. The JHR will offer a wide range of performances and services in gathering, in a single site at Cadarache, all the necessary functionalities and facilities for an effective production of results: e.g. fuel fabrication laboratories, preparation of the instrumented devices, interpretation of the experiments, modelling. The JHR must rely on a top level scientific environment based on experts teams from CEA and EC and local universities. With a thermal flux of 7,4.10 14 ncm -2 s -1 and a fast flux of 6,4.10 14 ncm -2 s -1 , it is possible to carry out irradiation experiments on materials and fuels whatever the reactor type considered. It will also be possible to carry out locally, fast neutron irradiation to achieve damage effect up to 25 dpa/year. (dpa = deplacement per atom). The study of the fuels behavior under accidental conditions, from analytical experiments, on a limited amount of irradiated fuel, is a major objective of the project. These oriented safety tests are possible by taking into account specific requirements in the design of the facility such as the tightness level of the containment building, the addition of an alpha hot cell and a laboratory for on line fission products measurement. (author)

Magnetisation transfer ratio measurement in the cervical spinal cord: a preliminary study in multiple sclerosis

International Nuclear Information System (INIS)

Silver, N.C.; Barker, G.J.; Losseff, N.A.; Gawne-Cain, M.L.; MacManus, D.G.; Thompson, A.J.; Miller, D.H.

1997-01-01

MRI readily detects the lesions of multiple sclerosis (MS) in the brain and spinal cord. Conventional MRI sequences do not, however, permit distinction between the various pathological characteristics (oedema, demyelination, axonal loss and gliosis) of lesions in MS. Magnetisation transfer (MT) imaging may be more specific in distinguishing the pathologies responsible for disability in MS, namely demyelination and axonal loss, and therefore may have a potential role in monitoring treatment. We have applied MT imaging to the cervical spinal cord to see if it is feasible to measure MT ratios (MTR) in this region where pathological changes may result in considerable disability. We studied 12 patients with MS and 12 age- and sex-matched normal controls using a sagittal T2-weighted fast spin-echo sequence with and without an MT pulse. The median value for cervical cord mean MTR measurement in normal controls was 19.30 % units (interquartile range 19.05-19.55), whereas values were significantly lower in MS patients (median = 17.95 % units, interquartile range 17.25-19.00, P 0.0004). There was a low intrarater variability for repeated mean MTR measurements. We conclude that it is possible to measure MTR in the cervical spinal cord, that a significant reduction occurs in patients with MS, and that there may be a role for this measure in future MS treatment trials. (orig.). With 2 figs., 1 tab

Magnetisation transfer ratio measurement in the cervical spinal cord: a preliminary study in multiple sclerosis

Energy Technology Data Exchange (ETDEWEB)

Silver, N.C. [NMR Research Unit and Department of Clinical Neurology, Institute of Neurology, Queen Square, London WC1N 3BG (United Kingdom); Barker, G.J. [NMR Research Unit and Department of Clinical Neurology, Institute of Neurology, Queen Square, London WC1N 3BG (United Kingdom); Losseff, N.A. [NMR Research Unit and Department of Clinical Neurology, Institute of Neurology, Queen Square, London WC1N 3BG (United Kingdom); Gawne-Cain, M.L. [NMR Research Unit and Department of Clinical Neurology, Institute of Neurology, Queen Square, London WC1N 3BG (United Kingdom); MacManus, D.G. [NMR Research Unit and Department of Clinical Neurology, Institute of Neurology, Queen Square, London WC1N 3BG (United Kingdom); Thompson, A.J. [NMR Research Unit and Department of Clinical Neurology, Institute of Neurology, Queen Square, London WC1N 3BG (United Kingdom); Miller, D.H. [NMR Research Unit and Department of Clinical Neurology, Institute of Neurology, Queen Square, London WC1N 3BG (United Kingdom)

1997-06-01

MRI readily detects the lesions of multiple sclerosis (MS) in the brain and spinal cord. Conventional MRI sequences do not, however, permit distinction between the various pathological characteristics (oedema, demyelination, axonal loss and gliosis) of lesions in MS. Magnetisation transfer (MT) imaging may be more specific in distinguishing the pathologies responsible for disability in MS, namely demyelination and axonal loss, and therefore may have a potential role in monitoring treatment. We have applied MT imaging to the cervical spinal cord to see if it is feasible to measure MT ratios (MTR) in this region where pathological changes may result in considerable disability. We studied 12 patients with MS and 12 age- and sex-matched normal controls using a sagittal T2-weighted fast spin-echo sequence with and without an MT pulse. The median value for cervical cord mean MTR measurement in normal controls was 19.30 % units (interquartile range 19.05-19.55), whereas values were significantly lower in MS patients (median = 17.95 % units, interquartile range 17.25-19.00, P = 0.0004). There was a low intrarater variability for repeated mean MTR measurements. We conclude that it is possible to measure MTR in the cervical spinal cord, that a significant reduction occurs in patients with MS, and that there may be a role for this measure in future MS treatment trials. (orig.). With 2 figs., 1 tab.

Evaluation of analysis method standardless by WDXRF and EDXRF of aluminum powder used in MTR type fuel

International Nuclear Information System (INIS)

Scapin, Valdirene O.; Salvador, Vera L.R.; Cotrim, Marycel E.B.; Pires, Maria A.F.; Scapin, Marcos A.

2011-01-01

The nuclear fuel used in IEA-R1m reactor at the Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP) is the MTR type. This fuel is compound of a core (U 3 Si 2 -Al dispersion briquette) wrapped in an aluminum plate with two cladding (superior and inferior) both in aluminum. The fuel element efficiency depends on the quality control of U 3 Si 2 and aluminum. For aluminum should be checked the impurities levels such as Si, Mn, Fe, Co, Cu, Zn and others and Al total . Aiming to provide a quick method, multielemental and non-destructive, the performance of the wavelength dispersive (WDXRF) and energy dispersive (EDXRF) X-ray fluorescence techniques, using the curve instrument sensitivity curve method, also known like standard less analysis, was evaluated. This method allows the determination from the element boron (Z=5) to uranium (Z=92) with concentrations ranging from 0.001 to 99.99% without the need for individual calibration curve and chemical pretreatments in the sample preparation. The results were compared with calibration curve method data, using statistical tests tools. By multivariate analysis of all the experimental data, especially by the discriminant analysis (DA) and cluster analysis (CA), respectively, it was possible to evaluate a correlation between variables of the applied analytical methods could be interpreted in context to qualify the fuels by XRF technique and method standard less. The results showed that the proposed method is satisfactory for both spectrometers; however it was found that the WDXRF presents the greatest conformity degree. (author)

GABA and glutamate levels correlate with MTR and clinical disability: Insights from multiple sclerosis.

Science.gov (United States)

Nantes, Julia C; Proulx, Sébastien; Zhong, Jidan; Holmes, Scott A; Narayanan, Sridar; Brown, Robert A; Hoge, Richard D; Koski, Lisa

2017-08-15

Converging areas of research have implicated glutamate and γ-aminobutyric acid (GABA) as key players in neuronal signalling and other central functions. Further research is needed, however, to identify microstructural and behavioral links to regional variability in levels of these neurometabolites, particularly in the presence of demyelinating disease. Thus, we sought to investigate the extent to which regional glutamate and GABA levels are related to a neuroimaging marker of microstructural damage and to motor and cognitive performance. Twenty-one healthy volunteers and 47 people with multiple sclerosis (all right-handed) participated in this study. Motor and cognitive abilities were assessed with standard tests used in the study of multiple sclerosis. Proton magnetic resonance spectroscopy data were acquired from sensorimotor and parietal regions of the brains' left cerebral hemisphere using a MEGA-PRESS sequence. Our analysis protocol for the spectroscopy data was designed to account for confounding factors that could contaminate the measurement of neurometabolite levels due to disease, such as the macromolecule signal, partial volume effects, and relaxation effects. Glutamate levels in both regions of interest were lower in people with multiple sclerosis. In the sensorimotor (though not the parietal) region, GABA concentration was higher in the multiple sclerosis group compared to controls. Lower magnetization transfer ratio within grey and white matter regions from which spectroscopy data were acquired was linked to neurometabolite levels. When adjusting for age, normalized brain volume, MTR, total N-acetylaspartate level, and glutamate level, significant relationships were found between lower sensorimotor GABA level and worse performance on several tests, including one of upper limb motor function. This work highlights important methodological considerations relevant to analysis of spectroscopy data, particularly in the afflicted human brain. These findings

The predetermined sites of examination for tender points in fibromyalgia syndrome are frequently associated with myofascial trigger points

DEFF Research Database (Denmark)

Ge, Hongyou; Wang, Ying; Danneskiold-Samsøe, Bente

2010-01-01

. PERSPECTIVE: This article underlies the importance of active MTrPs in FMS patients. Most of the TP sites in FMS are MTrPs. Active MTrPs may serve as a peripheral generator of fibromyalgia pain and inactivation of active MTrPs may thus be an alternative for the treatment of FMS.......The aim of this present study is to test the hypotheses that the 18 predetermined sites of examination for tender points (TP sites) in fibromyalgia syndrome (FMS) are myofascial trigger points (MTrPs), and that the induced pain from active MTrPs at TP sites may mimic fibromyalgia pain. Each TP site......), but not latent MTrPs (r = -.001, P = .99), was positively correlated with spontaneous pain intensity in FMS. The current study provides first evidence that pain from active MTrPs at TP sites mimics fibromyalgia pain. MTrPs may relate to generalized increased sensitivity in FMS due to central sensitization...

Ginger consumption enhances the thermic effect of food and promotes feelings of satiety without affecting metabolic and hormonal parameters in overweight men: A pilot study

Science.gov (United States)

Mansour, Muhammad S.; Ni, Yu-Ming; Roberts, Amy L.; Kelleman, Michael; RoyChoudhury, Arindam; St-Onge, Marie-Pierre

2012-01-01

Objective Evidence suggests that ginger consumption has anti-inflammatory, anti-hypertensive, glucose-sensitizing, and stimulatory effects on the gastrointestinal tract. This study assessed the effects of a hot ginger beverage on energy expenditure, feelings of appetite and satiety and metabolic risk factors in overweight men. Methods Ten men, age 39.1 ± 3.3 y and body mass index (BMI) 27.2 ± 0.3 kg/m2, participated in this randomized crossover study. Resting state energy expenditure was measured using indirect calorimetry and for 6 h after consumption of a breakfast meal with or without 2 g ginger powder dissolved in a hot water beverage. Subjective feelings of satiety were assessed hourly using visual analog scales (VAS) and blood samples were taken fasted and for 3 h after breakfast consumption. Results There was no significant effect of ginger on total resting energy expenditure (P = 0.43) or respiratory quotient (P = 0.41). There was a significant effect of ginger on thermic effect of food (ginger vs control = 42.7 ± 21.4 kcal/d, P = 0.049) but the area under the curve was not different (P = 0.43). VAS ratings showed lower hunger (P = 0.002), lower prospective food intake (P = 0.004) and greater fullness (P = 0.064) with ginger consumption versus control. There were no effects of ginger on glucose, insulin, lipids, or inflammatory markers. Conclusions The results, showing enhanced thermogenesis and reduced feelings of hunger with ginger consumption, suggest a potential role of ginger in weight management. Additional studies are necessary to confirm these findings. PMID:22538118

Analysis of a Neutronic Computational Model for the Core of Material Testing Reactor MTR by Using SQUID Code

International Nuclear Information System (INIS)

Al-Taweel, M.H.

2015-01-01

It is a conventional practice in the design of nuclear reactor to introduce calculation of hot points to determine spatial variation for energy generated and then determine power distribution.The study had been carried out for core of a reactor type (MTR) by the neutronic code SQUID. In this study, we replace the reflector of the reactor by H 2 O instead of D 2 O as originally the reactor designed.From the study we conclude that the reactor can operates safely, to make sure of that we calculate the multiplication factor where their values ranged from (1.0854) when all control rods are up to (1.001)when three control rods are up.Also the values of hot points were calculated and compared with French documents results with D 2 O as a reflector where the difference is (0.19%), and with light water as reflector instead of heavy water was calculated.For different cases according to control rod position , the values of hot point ranged between (0.46) to (1.64) in case all control rods are up also the values of the average power distributed on different fuel cells were calculated in case of light water as reflector firstly with three control rods are down and the maximum value (2.13*10 -2 Μw).Secondly in case offour control rods are down, the maximum value (1.925*10 -2 Μw) we notice almost coincidence between the neutron flux distribution through the core of reactor and in different positions of control rods

A Novel Mechanism of High-Level, Broad-Spectrum Antibiotic Resistance Caused by a Single Base Pair Change in Neisseria gonorrhoeae

Science.gov (United States)

2011-09-20

respect, Eisenstein and Sparling noted that a single base pair deletion in the inverted repeat in the mtrR promoter, a mutation which also confers high...Regulation of the MtrC-MtrD-MtrE efflux-pump system modulates the in vivo fitness of Neisseria gonorrhoeae. J. Infect. Dis. 196:1804 –1812. 21. Eisenstein BI

Study of the Changes in Composition of Ammonium Diuranate with Progress of Precipitation, and Study of the Properties of Ammonium Diuranate and its Subsequent Products Produced from both Uranyl Nitrate and Uranyl Fluoride Solutions

Directory of Open Access Journals (Sweden)

Subhankar Manna

2017-04-01

Full Text Available Uranium metal used for fabrication of fuel for research reactors in India is generally produced by magnesio-thermic reduction of UF4. Performance of magnesio-thermic reaction and recovery and quality of uranium largely depends on properties of UF4. As ammonium diuranate (ADU is first product in powder form in the process flow-sheet, properties of UF4 depend on properties of ADU. ADU is generally produced from uranyl nitrate solution (UNS for natural uranium metal production and from uranyl fluoride solution (UFS for low enriched uranium metal production. In present paper, ADU has been produced via both the routes. Variation of uranium recovery and crystal structure and composition of ADU with progress in precipitation reaction has been studied with special attention on first appearance of the precipitate Further, ADU produced by two routes have been calcined to UO3, then reduced to UO2 and hydroflorinated to UF4. Effect of two different process routes of ADU precipitation on the characteristics of ADU, UO3, UO2 and UF4 were studied here.

Study of the changes in composition of ammonium diuranate with progress of precipitation, and study of the properties of ammonium diuranate and its subsequent products produced from both uranyl nitrate and uranyl fluoride solutions

International Nuclear Information System (INIS)

Manna, Subhankar; Kumar, Raj; Satpati, Santosh K.; Roy, Saswati B.; Joshi, Jyeshtharaj B.

2017-01-01

Uranium metal used for fabrication of fuel for research reactors in India is generally produced by magnesio-thermic reduction of UF 4 . Performance of magnesio-thermic reaction and recovery and quality of uranium largely depends on properties of UF 4 . As ammonium diuranate (ADU) is first product in powder form in the process flow-sheet, properties of UF 4 depend on properties of ADU. ADU is generally produced from uranyl nitrate solution (UNS) for natural uranium metal production and from uranyl fluoride solution (UFS) for low enriched uranium metal production. In present paper, ADU has been produced via both the routes. Variation of uranium recovery and crystal structure and composition of ADU with progress in precipitation reaction has been studied with special attention on first appearance of the precipitate Further, ADU produced by two routes have been calcined to UO 3 , then reduced to UO 2 and hydroflorinated to UF 4 . Effect of two different process routes of ADU precipitation on the characteristics of ADU, UO 3 , UO 2 and UF 4 were studied here

The first step in using a robot in brain injury rehabilitation: patients' and health-care professionals' perspective.

Science.gov (United States)

Boman, Inga-Lill; Bartfai, Aniko

2015-01-01

To evaluate the usability of a mobile telepresence robot (MTR) in a hospital training apartment (HTA). The MTR was manoeuvred remotely and was used for communication when assessing independent living skills, and for security monitoring of cognitively impaired patients. Occupational therapists (OTs) and nurses received training in how to use the MTR. The nurses completed a questionnaire regarding their expectations of using the MTR. OTs and patients staying in the HTA were interviewed about their experiences of the MTR. Interviews and questionnaires were analysed qualitatively. The HTA patients were very satisfied with the MTR. The OTs and nurses reported generally positive experiences. The OT's found that assessment via the MTR was more neutral than being physically present. However, the use of the MTR implied considerable difficulties for health-care professionals. The main obstacle for the nurses was the need for fast and easy access in emergency situations while protecting the patients' integrity. The results indicate that the MTR could be a useful tool to support daily living skills and safety monitoring of HTA patients. However, when designing technology for multiple users, such as health-care professionals, the needs of all users, their routines and support services involved, should also be considered. Implications for Rehabilitation A mobile telepresence robot (MTR) can be a useful tool for assessments and communication in rehabilitation. The design of the robot has to allow easy use by remote users, particularly in emergency situations. When designing MTRs the needs of ALL users have to be taken into consideration.

[Physiotherapy strategies in osteoporosis--recommendations for daily practice].

Science.gov (United States)

Uhlemann, C; Lange, U

2006-09-01

Physiotherapy in osteoporosis essentially takes the form of stimulatory therapy tailored to the findings and the pathomechanism. The choice of therapy and its dosage depend on the desired result (prevention, cure, rehabilitation). Physical therapy applied in osteoporosis includes electrical, thermic (hydrothermic, high frequency thermic, light thermic) and mechanical (massage, physiotherapy) stimuli, which can be applied regionally, locally or hoistically. To be efficient, a pain therapy requires that the various painful states be differentiated between: whereas, for example, in the case of acute pain physiotherapy fulfils the function of immediate therapy (normally rest and "mild" cold applications), in chronic pain it has to fulfil the function of an adaptive performance therapy of neuronal structures (formative-adaptive physiotherapy, thermic therapy improving trophism, direct current, transcutaneous electric nerve stimulation/TENS). It is necessary and extremely important forday-to-day clinical practice that physiotherapy strategies that are tailored to each patient's needs and also economically justifiable be implemented. The article isintended to contribute to this.

Test-retest reliability of myofascial trigger point detection in hip and thigh areas.

Science.gov (United States)

Rozenfeld, E; Finestone, A S; Moran, U; Damri, E; Kalichman, L

2017-10-01

Myofascial trigger points (MTrP's) are a primary source of pain in patients with musculoskeletal disorders. Nevertheless, they are frequently underdiagnosed. Reliable MTrP palpation is the necessary for their diagnosis and treatment. The few studies that have looked for intra-tester reliability of MTrPs detection in upper body, provide preliminary evidence that MTrP palpation is reliable. Reliability tests for MTrP palpation on the lower limb have not yet been performed. To evaluate inter- and intra-tester reliability of MTrP recognition in hip and thigh muscles. Reliability study. 21 patients (15 males and 6 females, mean age 21.1 years) referred to the physical therapy clinic, 10 with knee or hip pain and 11 with pain in an upper limb, low back, shin or ankle. Two experienced physical therapists performed the examinations, blinded to the subjects' identity, medical condition and results of the previous MTrP evaluation. Each subject was evaluated four times, twice by each examiner in a random order. Dichotomous findings included a palpable taut band, tenderness, referred pain, and relevance of referred pain to patient's complaint. Based on these, diagnosis of latent MTrP's or active MTrP's was established. The evaluation was performed on both legs and included a total of 16 locations in the following muscles: rectus femoris (proximal), vastus medialis (middle and distal), vastus lateralis (middle and distal) and gluteus medius (anterior, posterior and distal). Inter- and intra-tester reliability (Cohen's kappa (κ)) values for single sites ranged from -0.25 to 0.77. Median intra-tester reliability was 0.45 and 0.46 for latent and active MTrP's, and median inter-tester reliability was 0.51 and 0.64 for latent and active MTrPs, respectively. The examination of the distal vastus medialis was most reliable for latent and active MTrP's (intra-tester k = 0.27-0.77, inter-tester k = 0.77 and intra-tester k = 0.53-0.72, inter-tester k = 0.72, correspondingly

The Global Threat Reduction Initiative's Return of Highly Enriched Uranium from Chile

Energy Technology Data Exchange (ETDEWEB)

Messick, C.E.; Dickerson, S.L.; Greenberg, R.F. Jr. [U.S. Department of Energy, National Nuclear Security Administration, Washington D.C. (United States); Andes, T.C. [Y-12 National Security Complex, Oak Ridge, TN (United States)

2011-07-01

In March 2010, the U.S. National Nuclear Security Administration's Office of Global Threat Reduction (GTRI), in collaboration with the Chilean Nuclear Energy Commission (CCHEN), completed a shipment of 18.2 kilograms of non-U.S.-origin highly enriched uranium (HEU) to the United States. The HEU was in the form of 71 aluminium-clad material test reactor (MTR) fuel elements and was the first GTRI Gap Program shipment that included non-U.S. origin irradiated nuclear fuel. Although shipments of research reactor fuels are not unique, this shipment served as a cornerstone to the first Presidential Nuclear Security Summit held in Washington, D.C., in April 2010. Carrying out the shipment became critical when a severe earthquake struck Chile just one day before the shipment was to occur. As the fuel had already been packaged in casks and the ocean vessels were nearing the port, U.S. and Chilean officials decided that it was most imperative that the shipment continue as planned. After careful analysis of the situation, inspection of the transportation packages, roadways, and port services, the shipment team was able to make the shipment occur in a safe and secure manner. This paper describes the loading activities at both the RECH-1 and RECH-2 reactors as well as the transportation of the loaded casks to the port of departure. (author)

Magnetization transfer imaging of normal and abnormal testis: preliminary results

International Nuclear Information System (INIS)

Tsili, Athina C.; Ntorkou, Alexandra; Maliakas, Vasilios; Argyropoulou, Maria I.; Baltogiannis, Dimitrios; Sylakos, Anastasios; Sofikitis, Nikolaos; Stavrou, Sotirios; Astrakas, Loukas G.

2016-01-01

The aim was to determine the magnetization transfer ratio (MTR) of normal testes, possible variations with age and to assess the feasibility of MTR in characterizing various testicular lesions. Eighty-six men were included. A three-dimensional gradient-echo MT sequence was performed, with/without an on-resonance binomial prepulse. MTR was calculated as: (SIo-SIm)/(SIo) x 100 %, where SIm and SIo refers to signal intensities with and without the saturation pulse, respectively. Subjects were classified as: group 1, 20-39 years; group 2, 40-65 years; and group 3, older than 65 years of age. Analysis of variance (ANOVA) followed by the least significant difference test was used to assess variations of MTR with age. Comparison between the MTR of normal testis, malignant and benign testicular lesions was performed using independent-samples t testing. ANOVA revealed differences of MTR between age groups (F = 7.51, P = 0.001). Significant differences between groups 1, 2 (P = 0.011) and 1, 3 (P < 0.001) were found, but not between 2, 3 (P = 0.082). The MTR (in percent) of testicular carcinomas was 55.0 ± 3.2, significantly higher than that of benign lesions (50.3 ± 4.0, P = 0.02) and of normal testes (47.4 ± 2.2, P < 0.001). MTR of normal testes decreases with age. MTR might be helpful in the diagnostic work-up of testicular lesions. (orig.)

Metabolism of 5-methylthioribose to methionine

International Nuclear Information System (INIS)

Miyazaki, J.H.; Yang, S.F.

1987-01-01

During ethylene biosynthesis, the H 3 CS-group of S-adenosylmethionine is released as 5'-methylthioadenosine, which is recycled to methionine via 5-methylthioribose (MTR). In mungbean hypocotyls and cell-free extracts of avocado, [ 14 C]MTR was converted into labeled methionine via 2-keto-4-methylthiobutyric acid (KMB) and 2-hydroxy-4-methylthiobutyric acid (HMB), as intermediates. Incubation of [ribose-U- 14 C]MTR with avocado extract resulted in the production of [ 14 C]formate, indicating the conversion of MTR to KMB involves a loss of formate, presumably from C-1 of MTR. Tracer studies showed that KMB was converted readily in vivo and in vitro to methionine, while HMB was converted much more slowly. The conversion of KMB to methionine by dialyzed avocado extract requires an amino donor. Among several potential donors examined, L-glutamine was the most efficient. Anaerobiosis inhibited only partially the oxidation of MTR to formate, KMB/HMB, and methionine by avocado extract. The role of O 2 in the conversion of MTR to methionine is discussed

Development of the uranium recovery process from rejected fuel plates in the fabrication of MTR type nuclear fuel

International Nuclear Information System (INIS)

Fleming Rubio, Peter Alex

2010-01-01

The current work was made in Conversion laboratory belonging to Chilean Nuclear Energy Commission, CCHEN. This is constituted by the development of three hydrometallurgical processes, belonging to the recovery of uranium from fuel plates based on uranium silicide (U_3Si_2) process, for nuclear research reactors MTR (Material Testing Reactor) type, those that come from the Fuel Elements Manufacture Plant, PEC. In the manufacturing process some of these plates are subjected to destructive tests by quality requirement or others are rejected for non-compliance with technical specifications, such as: lack of homogenization of the dispersion of uraniferous compound in the meat, as well as the appearance of the defects, such as blisters, so-called "dog bone", "fish tail", "remote islands", among others. Because the uranium used is enriched in 19.75% U_2_3_5 isotope, which explains the high value in the market, it must be recovered for reuse, returning to the production line of fuel elements. The uranium silicide, contained in the plates, is dispersed in an aluminum matrix and covered with plates and frames of ASTM 6061 Aluminum, as a sandwich coating, commonly referred to as 'meat' (sandwich meat). As aluminum is the main impurity, the process begins with this metal dissolution, present in meat and plates, by NaOH reaction, followed by a vacuum filtration, washing and drying, obtaining a powder of uranium silicide, with a small impurities percentage. Then, the crude uranium silicide reacts with a solution of hydrofluoric acid, dissolving the silicon and simultaneously precipitating UF_4 by reaction with HNO_3, obtaining an impure UO_2(NO_3)_2 solution. The experimental work was developed and implemented at laboratory scale for the three stages pertaining to the uranium recovery process, determining for each one the optimum operation conditions: temperature, molarity or concentration, reagent excess, among others (author)

Characterization of Heme Proteins Involved in Microbial Exoelectric Activity and Small Molecule-Sensing

KAUST Repository

Vogler, Malvina M.

2018-01-01

spectrometry confirms that the correct extensive post-translational modifications were performed and the ten heme groups were incorporated per protein of MtrC and MtrA and the correct lipid-anchor was attached to extracellular MtrC. Raman spectroscopy

Loading 076 assemblies in two IV-04 transport casks for transport to the U.S. Savannah River Site (SC); Trasferimento di 72 elementi irraggiati MTR dalla piscina dell`impianto EUREX a due contenitori IU-04 per il trasporto al Savannah River Site-Department of Energy (USA)

Energy Technology Data Exchange (ETDEWEB)

Gili, Michele [ENEA, Centro Ricerche Saluggia, Vercelli (Italy). Dipt. Energia

1997-09-01

The National Agency for New Technologies and the Environments has signed with the US Department of Energy a contract for the transfer of 150 irradiated MTR fuel assemblies stored in the EUREX plant pool at The National Agency for New Technologies and the Environments Research Centre of Saluggia. The first scheduled transport has been made in february 1997 and has involved the successful loading of 76 assemblies in two IU-04 (Pegase) transport casks. The loaded casks have been shipped to the U.S. Savannah River Site (SC).

Normothermic versus hypothermic cardiopulmonary bypass in children undergoing open heart surgery (thermic-2): study protocol for a randomized controlled trial.

Science.gov (United States)

Baos, Sarah; Sheehan, Karen; Culliford, Lucy; Pike, Katie; Ellis, Lucy; Parry, Andrew J; Stoica, Serban; Ghorbel, Mohamed T; Caputo, Massimo; Rogers, Chris A

2015-05-25

During open heart surgery, patients are connected to a heart-lung bypass machine that pumps blood around the body ("perfusion") while the heart is stopped. Typically the blood is cooled during this procedure ("hypothermia") and warmed to normal body temperature once the operation has been completed. The main rationale for "whole body cooling" is to protect organs such as the brain, kidneys, lungs, and heart from injury during bypass by reducing the body's metabolic rate and decreasing oxygen consumption. However, hypothermic perfusion also has disadvantages that can contribute toward an extended postoperative hospital stay. Research in adults and small randomized controlled trials in children suggest some benefits to keeping the blood at normal body temperature throughout surgery ("normothermia"). However, the two techniques have not been extensively compared in children. The Thermic-2 study will test the hypothesis that the whole body inflammatory response to the nonphysiological bypass and its detrimental effects on different organ functions may be attenuated by maintaining the body at 35°C-37°C (normothermic) rather than 28°C (hypothermic) during pediatric complex open heart surgery. This is a single-center, randomized controlled trial comparing the effectiveness and acceptability of normothermic versus hypothermic bypass in 141 children with congenital heart disease undergoing open heart surgery. Children having scheduled surgery to repair a heart defect not requiring deep hypothermic circulatory arrest represent the target study population. The co-primary clinical outcomes are duration of inotropic support, intubation time, and postoperative hospital stay. Secondary outcomes are in-hospital mortality and morbidity, blood loss and transfusion requirements, pre- and post-operative echocardiographic findings, routine blood gas and blood test results, renal function, cerebral function, regional oxygen saturation of blood in the cerebral cortex, assessment of

Magnetization transfer analysis of cartilage repair tissue: a preliminary study

International Nuclear Information System (INIS)

Palmieri, F.; Keyzer, F. de; Maes, F.; Breuseghem, I. van

2006-01-01

To evaluate the magnetization transfer ratio (MTR) after two different cartilage repair procedures, and to compare these data with the MTR of normal cartilage. Twenty-seven patients with a proven cartilage defect were recruited: 13 were treated with autologous chondrocyte implantation (ACI) and 14 were treated with the microfracture technique (MFR). All patients underwent MRI examinations with MT-sequences before the surgical treatment, after 12 months (26 patients) and after 24 months (11 patients). Eleven patients received a complete follow-up study at all three time points (five of the ACI group and six of the MFR group). All images were transferred to a workstation to calculate MTR images. For every MT image set, different ROIs were delineated by two radiologists. Means were calculated per ROI type in the different time frames and in both groups of cartilage repair. The data were analyzed with unpaired t- and ANOVA tests, and by calculating Pearson's correlation coefficient. No significant differences were found in the MTR of fatty bone marrow, muscle and normal cartilage in the different time frames. There was a significant but small difference between the MTR of normal cartilage and the cartilage repair area after 12 months for both procedures. After 24 months, the MTR of ACI repaired cartilage (0.31±0.07) was not significantly different from normal cartilage MTR (0.34±0.05). The MTR of MFR repaired cartilage (0.28±0.02), still showed a significant difference from normal cartilage. The differences between damaged and repaired cartilage MTR are too small to enable MT-imaging to be a useful tool for postoperative follow-up of cartilage repair procedures. There is, however, an evolution towards normal MTR-values in the cartilage repair tissue (especially after ACI repair). (orig.)

A Decaheme Cytochrome as a Molecular Electron Conduit in Dye-Sensitized Photoanodes

Science.gov (United States)

Hwang, Ee Taek; Sheikh, Khizar; Orchard, Katherine L; Hojo, Daisuke; Radu, Valentin; Lee, Chong-Yong; Ainsworth, Emma; Lockwood, Colin; Gross, Manuela A; Adschiri, Tadafumi; Reisner, Erwin; Butt, Julea N; Jeuken, Lars J C

2015-01-01

In nature, charge recombination in light-harvesting reaction centers is minimized by efficient charge separation. Here, it is aimed to mimic this by coupling dye-sensitized TiO2 nanocrystals to a decaheme protein, MtrC from Shewanella oneidensis MR-1, where the 10 hemes of MtrC form a ≈7-nm-long molecular wire between the TiO2 and the underlying electrode. The system is assembled by forming a densely packed MtrC film on an ultra-flat gold electrode, followed by the adsorption of approximately 7 nm TiO2 nanocrystals that are modified with a phosphonated bipyridine Ru(II) dye (RuP). The step-by-step construction of the MtrC/TiO2 system is monitored with (photo)electrochemistry, quartz-crystal microbalance with dissipation (QCM-D), and atomic force microscopy (AFM). Photocurrents are dependent on the redox state of the MtrC, confirming that electrons are transferred from the TiO2 nanocrystals to the surface via the MtrC conduit. In other words, in these TiO2/MtrC hybrid photodiodes, MtrC traps the conduction-band electrons from TiO2 before transferring them to the electrode, creating a photobioelectrochemical system in which a redox protein is used to mimic the efficient charge separation found in biological photosystems. PMID:26180522

Atrophy and magnetization transfer ratio of the corpus callosum in patients with Alzheimer's disease

International Nuclear Information System (INIS)

Imon, Yukari; Hanyu, Haruo; Iwamoto, Toshihiko; Takasaki, Masaru; Abe, Kimihiko

1998-01-01

We compared atrophy and magnetization transfer ratio (MTR) in the corpus callosum in patients with Alzheimer's disease and age-matched normal subjects. Fifteen patients with Alzheimer's disease and fourteen normal subjects received MRI. The corpus callosum was divided into three parts (anterior, middle, and posterior portions) on midsagittal slice, and their areas on T2-weighted reversed images and MTR on magnetization transfer contrast images in each portion were measured. The area and MTR decreased significantly in the posterior portion in patients with Alzheimer's disease. In the anterior portion, MTR decreased significantly, but although the area showed no significant change. In the middle portion, the area and MTR showed no significant change. MTR and the area was correlated in each portion in patients with Alzheimer's disease. The score of Hasegawa dementia scale-revised (HDS-R) and the area of the middle, posterior and total of corpus callosum were significantly related. The score of HDS-R and MTR in the anterior portion of corpus callosum were significantly related. The present study revealed decreases in MTR in the anterior portion of the corpus callosum of patients with Alzheimer's disease although the area showed no significant change, and this change suggests the increase in free water and/or the decrease in bound water in tissues, probably due to demyelination and axonal degeneration. (author)

Study of the changes in composition of ammonium diuranate with progress of precipitation, and study of the properties of ammonium diuranate and its subsequent products produced from both uranyl nitrate and uranyl fluoride solutions

Energy Technology Data Exchange (ETDEWEB)

Manna, Subhankar; Kumar, Raj; Satpati, Santosh K.; Roy, Saswati B. [Bhabha Atomic Research Centre, Trombay, Mumbai (India); Joshi, Jyeshtharaj B. [Dept. of Chemical Engineering, Institute of Chemical Technology, Mumbai (India)

2017-04-15

Uranium metal used for fabrication of fuel for research reactors in India is generally produced by magnesio-thermic reduction of UF{sub 4}. Performance of magnesio-thermic reaction and recovery and quality of uranium largely depends on properties of UF{sub 4}. As ammonium diuranate (ADU) is first product in powder form in the process flow-sheet, properties of UF{sub 4} depend on properties of ADU. ADU is generally produced from uranyl nitrate solution (UNS) for natural uranium metal production and from uranyl fluoride solution (UFS) for low enriched uranium metal production. In present paper, ADU has been produced via both the routes. Variation of uranium recovery and crystal structure and composition of ADU with progress in precipitation reaction has been studied with special attention on first appearance of the precipitate Further, ADU produced by two routes have been calcined to UO{sub 3}, then reduced to UO{sub 2} and hydroflorinated to UF{sub 4}. Effect of two different process routes of ADU precipitation on the characteristics of ADU, UO{sub 3}, UO{sub 2} and UF{sub 4} were studied here.

On the nature of the afferent fibers of oculomotor nerve.

Science.gov (United States)

Manni, E; Draicchio, F; Pettorossi, V E; Carobi, C; Grassi, S; Bortolami, R; Lucchi, M L

1989-03-01

The oculogyric nerves contain afferent fibers originating from the ophthalmic territory, the somata of which are located in the ipsilateral semilunar ganglion. These primary sensory neurons project to the Subnucleus Gelatinosus of the Nucleus Caudalis Trigemini, where they make presynaptic contact with the central endings of the primary trigeminal afferents running in the fifth cranial nerve. After complete section of the trigeminal root, the antidromic volleys elicited in the trunk of the third cranial nerve by stimulating SG of NCT consisted of two waves belonging to the A delta and C groups. The area of both components of the antidromic volleys decreased both after bradykinin and hystamine injection into the corresponding cutaneous region and after thermic stimulation of the ipsilateral trigeminal ophthalmic territory. The reduction of such potentials can be explained in terms of collision between the antidromic volleys and those elicited orthodromically by chemical and thermic stimulation. Also, capsaicin applied on the nerve induced an immediate increase, followed by a long lasting decrease, of orthodromic evoked response area. These findings bring further support to the nociceptive nature of the afferent fibers running into the oculomotor nerve.

Thermically tuned nematic guide

Science.gov (United States)

Corella-Madueño, Adalberto; Reyes, Juan Adrián

2006-06-01

We consider a cylindrical fiber with a liquid crystal core satisfying homeotropic weak anchoring boundary conditions. We find the different textures of the nematic inside the cylinder obtained by changing the temperature. We calculate exactly the spatial distribution of the transverse magnetic modes in the guide as a function of temperature of the system by using a numerical scheme.

46 CFR 11.950 - Subjects for engineer endorsements.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Subjects for engineer endorsements. 11.950 Section 11....950 Subjects for engineer endorsements. Table 11.950—Subjects for Engineer Endorsements Unlimited chief engineer STM MTR Unlimited 1st asst. engineer STM MTR Unlimited 2nd asst. engineer STM MTR...

Comparison of adherence to generic multi-tablet regimens vs. brand multi-tablet and brand single-tablet regimens likely to incorporate generic antiretroviral drugs by breaking or not fixed-dose combinations in HIV-infected patients.

Science.gov (United States)

Rwagitinywa, Joseph; Lapeyre-Mestre, Maryse; Bourrel, Robert; Montastruc, Jean-Louis; Sommet, Agnès

2018-03-05

Adherence to antiretroviral (ARV) is crucial to achieve viral load suppression in HIV-infected patients. This study aimed to compare adherence to generic multi-tablet regimens (MTR) vs. brand MTR likely to incorporate ARV drugs without breaking fixed-dose combinations (FDC) and brand single-tablet regimens (STR) likely to incorporate generics by breaking the FDC. Patients aged of 18 years or over exposed to one of the generic or the brand of lamivudine (3TC), zidovudine/lamivudine (AZT/TC), nevirapine (NVP), or efavirenz (EFV), or the brand STR of efavirenz/emtricitabine/tenofovir (EFV/FTC/TDF). Adherence was measured by medication possession ratio (MPR) using both defined daily dose (DDD) and daily number of tablet recommended for adults (DNT). Adherence to generic MTR vs. brand MTR and brand STR was compared using Kruskal-Wallis. The overall median adherence was 0.97 (IQR 0.13) by DNT method and 0.97 (0.14) by DDD method. Adherence in patients exposed to generic MTR (n = 165) vs. brand MTR (n = 481) and brand STR (n = 470) was comparable by DNT and DDD methods. In conclusion, adherence to generic MTR was high and comparable with adherence to brand MTR and to STR. Utilization of DDD instead DNT to measure the MPR led to small but nonsignificant difference that has no clinical impact. © 2018 Société Française de Pharmacologie et de Thérapeutique.

Characterizing amide proton transfer imaging in haemorrhage brain lesions using 3T MRI

Energy Technology Data Exchange (ETDEWEB)

Jeong, Ha-Kyu [Philips Korea, Seoul (Korea, Republic of); Korea Basic Science Institute, Chungcheongbuk-do (Korea, Republic of); Han, Kyunghwa [Yonsei University College of Medicine, Department of Radiology and Research Institute of Radiological Science, Seodaemun-gu, Seoul (Korea, Republic of); Yonsei University College of Medicine, Yonsei Biomedical Research Institute, Seoul (Korea, Republic of); Zhou, Jinyuan [Johns Hopkins University School of Medicine, Division of MRI Research, Department of Radiology, Baltimore, MD (United States); Zhao, Yansong [Philips Healthcare, MR Clinical Science, Cleveland, OH (United States); Choi, Yoon Seong; Lee, Seung-Koo; Ahn, Sung Soo [Yonsei University College of Medicine, Department of Radiology and Research Institute of Radiological Science, Seodaemun-gu, Seoul (Korea, Republic of)

2017-04-15

The aim of this study was to characterize amide proton transfer (APT)-weighted signals in acute and subacute haemorrhage brain lesions of various underlying aetiologies. Twenty-three patients with symptomatic haemorrhage brain lesions including tumorous (n = 16) and non-tumorous lesions (n = 7) were evaluated. APT imaging was performed and analyzed with magnetization transfer ratio asymmetry (MTR{sub asym}). Regions of interest were defined as the enhancing portion (when present), acute or subacute haemorrhage, and normal-appearing white matter based on anatomical MRI. MTR{sub asym} values were compared among groups and components using a linear mixed model. MTR{sub asym} values were 3.68 % in acute haemorrhage, 1.6 % in subacute haemorrhage, 2.65 % in the enhancing portion, and 0.38 % in normal white matter. According to the linear mixed model, the distribution of MTR{sub asym} values among components was not significantly different between tumour and non-tumour groups. MTR{sub asym} in acute haemorrhage was significantly higher than those in the other regions regardless of underlying pathology. Acute haemorrhages showed high MTR{sub asym} regardless of the underlying pathology, whereas subacute haemorrhages showed lower MTR{sub asym} than acute haemorrhages. These results can aid in the interpretation of APT imaging in haemorrhage brain lesions. (orig.)

Magnetisation transfer MR imaging of the kidney: evaluation at 3.0 T in association with renal function

Energy Technology Data Exchange (ETDEWEB)

Ito, Katsuyoshi [Kawasaki Medical School, Department of Diagnostic Radiology, Kurashiki, Okayama (Japan); Kurashiki Daiichi Hospital, Department of Radiology, Kurashiki, Okayama (Japan); Hayashida, Minoru; Izumitani, Shogo; Fujimine, Tomoko; Onishi, Takeo; Genba, Katsuhiro [Kurashiki Daiichi Hospital, Department of Radiology, Kurashiki, Okayama (Japan)

2013-08-15

To evaluate the feasibility of using magnetisation transfer (MT) MRI of the kidney at 3.0 T to assess renal function. Forty-four patients who underwent abdominal MRI on a 3.0-T system including gradient-echo (GRE) sequences with and without MT pulse were included. In each patient, MT ratio (MTR) of the renal cortex and medulla was measured by using regions of interest (ROIs) placed on the MTR map image. Regression analysis showed good correlation between estimated glomerular filtration rate (eGFR) and MTR of the renal cortex (r = -0.645, P < 0.0001). Among 44 patients, 22 were categorised as the normal renal function group and 22 were classified as the decreased eGFR group. The mean MTR of the renal cortex in patients with decreased eGFR (mean MTR, 30.7 {+-} 3.2 %) was significantly higher (P < 0.0001) than that in patients with normal renal function (mean MTR, 25.3 {+-} 2.2 %), although the mean MTRs of the renal medulla in the two groups were not significantly different. There was good correlation between eGFR and MTR of the renal cortex derived from MT MRI at 3.0 T. This technique may have the potential to evaluate the degree of renal function non-invasively in patients with renal impairment. (orig.)

PROTECTIVE CLOTHING BASED ON PERMSELECTIVE MEMBRANE AND CARBON ADSORPTION

Energy Technology Data Exchange (ETDEWEB)

J.G. Wijmans; J.O. Stull

2001-11-07

The goal of this project was to develop chemical protective clothing for use by DOE decontamination and decommissioning workers that is sufficiently water vapor permeable to keep the workers cool, thereby enhancing their productivity. This report describes the results of Phase II of a two-phase project to complete development of the novel permselective material and to test protective clothing made from the fabric. In Phase I a novel material incorporating a nonporous hydrophilic polyvinylacohol (PVA) layer, which is water vapor permeable but relatively impermeable to organic vapors, was developed. The results of the Phase I tests showed that the chemical resistance of the MTR material is comparable to that of Saranex/Tyvek materials, and that the comfort properties are closer to those of Tyvek (as measured in terms of CLO and permeability). Chemical resistance was measured using permeation tests against liquid dichloromethane. Comfort properties were ascertained by measuring the water vapor transmission of the material and by sweating manikin tests on whole protective suits. In addition, a cost/benefit analysis demonstrated that use of MTR's material technology could result in significant improvements in work productivity and cost savings if protective clothing items made from the new material were used more than once. In Phase II, MTR undertook a program to optimize the performance and production engineering for the new material technology. A partnership was formed with Kimberly-Clark Corporation to assist with a detailed evaluation of the MTR technology, and MTR used the services of Mr. Jeff Stull, President of the consulting firm International Personnel Protection, Inc., who conducted a detailed economic and application analysis for the developed fabric. The protective fabric manufacturing steps were simplified significantly, resulting in a 30% reduction in manufacturing costs and eliminating the necessity for capital investment in production equipment

PROTECTIVE CLOTHING BASED ON PERMSELECTIVE MEMBRANE AND CARBON ADSORPTION

International Nuclear Information System (INIS)

Wijmans, J.G.; Stull, J.O.

2001-01-01

The goal of this project was to develop chemical protective clothing for use by DOE decontamination and decommissioning workers that is sufficiently water vapor permeable to keep the workers cool, thereby enhancing their productivity. This report describes the results of Phase II of a two-phase project to complete development of the novel permselective material and to test protective clothing made from the fabric. In Phase I a novel material incorporating a nonporous hydrophilic polyvinylacohol (PVA) layer, which is water vapor permeable but relatively impermeable to organic vapors, was developed. The results of the Phase I tests showed that the chemical resistance of the MTR material is comparable to that of Saranex/Tyvek materials, and that the comfort properties are closer to those of Tyvek (as measured in terms of CLO and permeability). Chemical resistance was measured using permeation tests against liquid dichloromethane. Comfort properties were ascertained by measuring the water vapor transmission of the material and by sweating manikin tests on whole protective suits. In addition, a cost/benefit analysis demonstrated that use of MTR's material technology could result in significant improvements in work productivity and cost savings if protective clothing items made from the new material were used more than once. In Phase II, MTR undertook a program to optimize the performance and production engineering for the new material technology. A partnership was formed with Kimberly-Clark Corporation to assist with a detailed evaluation of the MTR technology, and MTR used the services of Mr. Jeff Stull, President of the consulting firm International Personnel Protection, Inc., who conducted a detailed economic and application analysis for the developed fabric. The protective fabric manufacturing steps were simplified significantly, resulting in a 30% reduction in manufacturing costs and eliminating the necessity for capital investment in production equipment

Use of Mixer Torque Rheometer to Clarify the Relationship between the Kneading States of Wet Mass and the Dissolution of Final Product in High Shear Granulation.

Science.gov (United States)

Otsuka, Tomoko; Kuroiwa, Yosuke; Sato, Kazunari; Yamashita, Kazunari; Hakomori, Tadashi; Kimura, Shin-Ichiro; Iwao, Yasunori; Itai, Shigeru

2018-01-01

The properties of wet mass, which indicate the progress of high shear granulation processes, usually have an effect on final product properties, such as tablet dissolution. The mixer torque rheometer (MTR) is a useful tool for quantitatively measuring the 'kneading state' of wet mass and detecting differences in granules. However, there have been no studies of the relationship between the MTR torque and the final product properties to date. In this study, we measured the MTR torque of wet granules at different kneading states, which were prepared by changing the granulation conditions. We then evaluated the relationship between the MTR torque and the dissolution rate of the final product properties. The amperage of the high shear granulator is usually monitored during granulation, but we could not detect a difference in the kneading state through the amperage. However, using MTR torque we were able to quantify the difference of the wet mass. Moreover, MTR torque showed a high correlation with dissolution, compared with the correlations with other intermediate properties, such as granules particle size and tablet hardness. These other properties are affected by following processes and are not properties that directly relate to the kneading state. Thus, MTR torque is a property of wet mass after granulation, and it can be used to directly evaluate differences of the kneading state, and as a result, dissolution. These results indicate the importance of controlling the kneading state, i.e., the progress of granulation, and the utility of MTR for detecting differences in wet mass.

Transient thermal hydraulic analysis of the IAEA 10 MW MTR reactor during Loss of Flow Accident to investigate the flow inversion

International Nuclear Information System (INIS)

AL-Yahia, Omar S.; Albati, Mohammad A.; Park, Jonghark; Chae, Heetaek; Jo, Daeseong

2013-01-01

Highlights: • Transient analyses of a slow and fast LOFA were investigated. • A reactor kinetic and thermal hydraulic coupled model was developed. • Based on force balance, the flow rate during flow inversion was determined. • Flow inversion in a hot channel occurred earlier than in an average channel. • Two temperature peaks were observed during both slow and fast LOFA. - Abstract: Transient analyses of the IAEA 10 MW MTR reactor are investigated during a fast and slow Loss of Flow Accident (LOFA) with a neutron kinetic and thermal hydraulic coupling model. A spatial-dependent thermal hydraulic technique is adopted for analyzing the local thermal hydraulic parameters and hotspot location during a flow inversion. The flow rate through the channel is determined in terms of a balance between driving and preventing forces. Friction and buoyancy forces act as resistance of the flow before a flow inversion while buoyancy force becomes the driving force after a flow inversion. By taking into account the buoyancy effect to determine the flow rate, the difference in the flow inversion time between hot and average channels is investigated: a flow inversion occurs earlier in the hot channel than in an average channel. Furthermore, the movement of the hotspot location before and after a flow inversion is investigated for a slow and fast LOFA. During a flow inversion, two temperature peaks are observed: (1) the first temperature peak is at the initiation of the LOFA, and (2) the second temperature peak is when a flow inversion occurs. The maximum temperature of the cladding is found at the second temperature peak for both LOFA analyses, and is lower than the saturation temperature

Magnetisation transfer MR imaging of the kidney: evaluation at 3.0 T in association with renal function

International Nuclear Information System (INIS)

Ito, Katsuyoshi; Hayashida, Minoru; Izumitani, Shogo; Fujimine, Tomoko; Onishi, Takeo; Genba, Katsuhiro

2013-01-01

To evaluate the feasibility of using magnetisation transfer (MT) MRI of the kidney at 3.0 T to assess renal function. Forty-four patients who underwent abdominal MRI on a 3.0-T system including gradient-echo (GRE) sequences with and without MT pulse were included. In each patient, MT ratio (MTR) of the renal cortex and medulla was measured by using regions of interest (ROIs) placed on the MTR map image. Regression analysis showed good correlation between estimated glomerular filtration rate (eGFR) and MTR of the renal cortex (r = -0.645, P < 0.0001). Among 44 patients, 22 were categorised as the normal renal function group and 22 were classified as the decreased eGFR group. The mean MTR of the renal cortex in patients with decreased eGFR (mean MTR, 30.7 ± 3.2 %) was significantly higher (P < 0.0001) than that in patients with normal renal function (mean MTR, 25.3 ± 2.2 %), although the mean MTRs of the renal medulla in the two groups were not significantly different. There was good correlation between eGFR and MTR of the renal cortex derived from MT MRI at 3.0 T. This technique may have the potential to evaluate the degree of renal function non-invasively in patients with renal impairment. (orig.)

Effects of exposure to electromagnetic fields (microwaves) on mammalian pregnancy

International Nuclear Information System (INIS)

Dugauquier, C.

2006-01-01

Women soldiers account now for nearly 10 % of the NATO forces. Some studies have alleged that exposure to microwaves may result in pregnancy mishaps. We have tried to assess what was the risk. A lot of studies were conducted on non mammalian species: birds, sea urchins, worms and insects. Extrapolation to the mammals is subject to caution due to the protective effect of intrauterine development. We reviewed the literature dealing only with mammals. Even if some discrepancy persists, it seems that the presence or the absence of thermic effect is essential in order to estimate the risk. Reduced birth weight and increased rate of miscarriage were the most common findings when the exposure reached a thermic effect. In the majority of the studies, non thermic exposure had no impact on pregnancy outcome. (authors)

Effects of exposure to electromagnetic fields (microwaves) on mammalian pregnancy; Effets sur la gestation des mammiferes de l'exposition aux champs electromagnetiques (micro-ondes)

Energy Technology Data Exchange (ETDEWEB)

Dugauquier, C. [Hopital Central de la Base Reine Astrid, Div. Epidemiologie et Biostatistiques, Bruxelles (Belgium)

2006-06-15

Women soldiers account now for nearly 10 % of the NATO forces. Some studies have alleged that exposure to microwaves may result in pregnancy mishaps. We have tried to assess what was the risk. A lot of studies were conducted on non mammalian species: birds, sea urchins, worms and insects. Extrapolation to the mammals is subject to caution due to the protective effect of intrauterine development. We reviewed the literature dealing only with mammals. Even if some discrepancy persists, it seems that the presence or the absence of thermic effect is essential in order to estimate the risk. Reduced birth weight and increased rate of miscarriage were the most common findings when the exposure reached a thermic effect. In the majority of the studies, non thermic exposure had no impact on pregnancy outcome. (authors)

Is white matter affected in adolescents with anorexia nervosa? A study using magnetization transfer imaging.

Science.gov (United States)

Akgül, Sinem; Öz, Ayşegül; Karlı-Oğuz, Kader; Kanbur, Nuray; Derman, Orhan

2016-01-01

The aim of the study was to assess potential changes in structural integrity of the brain in adolescent patients with Anorexia Nervosa (AN) using the magnetization transfer imaging technique and re-evaluating after nutritional rehabilitation was accomplished. Magnetization transfer ratio (MTR) was used for the detection and quantification of histological changes to the white matter of 9 adolescents diagnosed with AN at diagnosis and after weight gain. Using the MTR technique 6 regions were measured: the pons, left cerebellar hemisphere, amygdala, thalamus, corona radiata and white matter adjacent to the left dorsolateral prefrontal cortex. Scans from the patients with AN were also compared with scans from an age-matched subset of 9 healthy controls. Compared with control subjects, the MTR of participants with AN was no different either at the early stages of diagnosis (p=0.62) or after weight recovery (p=0.81). Similarly, comparison of MTR between patients with AN at diagnoses compared with MTR after weight recovery yielded no statistically significant difference (P=0.33). We conclude that MTR was not able to detect any neuropathological alterations in adolescent patients with AN at either diagnosis or after nutritional recovery and the achievement of weight gain.

Modified pectic polysaccharide from turmeric (Curcuma longa): A potent dietary component against gastric ulcer.

Science.gov (United States)

Harsha, Mysore R; Chandra Prakash, Serkad V; Dharmesh, Shylaja M

2016-03-15

Native, intact (TrPP) and modified, low-molecular-weight (MTrPP) forms of pectic polysaccharides isolated from turmeric were evaluated for ulcer-preventive potentials in in vitro and in vivo models. Data indicated that MTrPP possessed significantly better ulcer-preventive property than TrPP; inhibiting ulcer scores up to 85%. Results were substantiated by effective muco-protection, H(+),K(+)-ATPase down-regulation, inhibition of H. pylori growth/adherence, higher antioxidant/cytoprotective mechanisms. Structural data indicated TrPP and MTrPP differ in their molecular weights and structural characteristics with different sugar compositions and side chain ratios. MTrPP was rich in galacturonic acid (687mg/g; TrPP-544mg/g) and galactose (52.9%; TrPP-21.7%). Results were substantiated by NMR/FTIR data indicating the presence of homogalacturonan and rhamnogalacturonam-I containing galactans. By virtue of binding to inflammatory marker (galectin-3), galactans may reduce inflammation induced ulcerations. The low molecular weight of MTrPP (155kDa; TrPP-13kDa) may increase its bioavailability than TrPP, thus MTrPP may possess higher antiulcer potential. Copyright © 2015 Elsevier Ltd. All rights reserved.

Magnetization transfer changes of grey and white matter in Parkinson's disease

International Nuclear Information System (INIS)

Tambasco, N.; Mancini, M.L.; Paciaroni, M.; Gallai, V.; Pelliccioli, G.P.; Chiarini, P.; Leone, F.; Montanari, G.E.

2003-01-01

Since the attempt to evidence structural brain damage in Parkinson's disease (PD) by conventional magnetic resonance imaging (MRI) is usually disappointing, we have investigated whether the magnetization transfer ratio (MTR) can reflect changes in grey and white matter of PD patients. MTR was quantified in 44 regions of interest (ROIs) in both grey and white matter of 11 non-demented PD patients, ranging from 2 to 4 on the Hoehn and Yahr Scale, and eight age-matched healthy subjects. MTR differences between patients and controls were found in the supratentorial white matter and in the brainstem. In particular, lower MTR values were found in the paraventricular white matter of PD patients (p < 0.05) while no differences were observed in corpus callosum, frontal, parietal, occipital lobes or centrum semiovalis. Lower MTR values were found in substantia nigra (p < 0.001), red nucleus (p < 0.05) and pons (p < 0.05) of the patient group. No differences were discovered in basal ganglia and thalamus. These findings suggest that MTR measurements in the paraventricular white matter and brainstem may help to recognize a marker for probable PD. (orig.)

Moderate treadmill running exercise prior to tendon injury enhances wound healing in aging rats.

Science.gov (United States)

Zhang, Jianying; Yuan, Ting; Wang, James H-C

2016-02-23

The effect of exercise on wound healing in aging tendon was tested using a rat moderate treadmill running (MTR) model. The rats were divided into an MTR group that ran on a treadmill for 4 weeks and a control group that remained in cages. After MTR, a window defect was created in the patellar tendons of all rats and wound healing was analyzed. We found that MTR accelerated wound healing by promoting quicker closure of wounds, improving the organization of collagen fibers, and decreasing senescent cells in the wounded tendons when compared to the cage control. MTR also lowered vascularization, increased the numbers of tendon stem/progenitor cells (TSCs) and TSC proliferation than the control. Besides, MTR significantly increased the expression of stem cell markers, OCT-4 and Nanog, and tenocyte genes, Collagen I, Collagen III and tenomodulin, and down-regulated PPAR-γ, Collagen II and Runx-2 (non-tenocyte genes). These findings indicated that moderate exercise enhances healing of injuries in aging tendons through TSC based mechanisms, through which exercise regulates beneficial effects in tendons. This study reveals that appropriate exercise may be used in clinics to enhance tendon healing in aging patients.

Magnetisation transfer measurements of the subcortical grey and white matter in Parkinson's disease with and without dementia and in progressive supranuclear palsy

International Nuclear Information System (INIS)

Hanyu, H.; Asano, T.; Sakurai, H.; Takasaki, M.; Shindo, H.; Abe, K.

2001-01-01

We measured the magnetisation transfer ratio (MTR) in the subcortical grey and white matter of 11 patients with idiopathic Parkinson's disease (PD) without dementia, six with PD with dementia (PDD), six with progressive supranuclear palsy (PSP), and 12 elderly control subjects to assess regional differences in structural brain damage. There were no significant differences in MTR in any region between PD and controls. However, patients with PDD had significantly lower MTR in the subcortical white matter, including the frontal white matter and the genu of the corpus callosum than the controls, whereas PSP had significantly lower MTR in the subcortical grey matter, including the putamen, globus pallidus and thalamus, in addition to the subcortical white matter. This suggests that regional patterns of structural brain damage can be detected using the magnetisation transfer technique. Measurement of MTR in the subcortical grey and white matter may be useful in differential diagnosis. (orig.)

Thermal calculations for water cooled research reactors

International Nuclear Information System (INIS)

Fabrega, S.

1979-01-01

The formulae and the more important numerical data necessary for thermic calculations on the core of a research reactor, cooled with low pressure water, are presented. Most of the problems met by the designer and the operator are dealt with (calculations margins, cooling after shut-down). Particular cases are considered (gas release, rough walls, asymmetric cooling slabs etc.), which are not generally envisaged in works on general thermics

Sensible biological models to be exposed to VDT (Video Display Terminal) radiations in human male reproduction

International Nuclear Information System (INIS)

Tritto, J.; North, M.-O.; Laverdure, A.M.; Surbeck, J.

1999-01-01

Temperature and environmental effects, particularly endocrine disrupters and EMF radiations, are actively investigated in human and non-human reproduction experimental models. Sensitivity and specificity of the different cell types of the testes seminiferous tubules in animals and in human are evaluated, showing a specific responsiveness of spermatogonia (SPG) and resting pachytene spermatocytes (SPC). At 32 o C the 24 h short-term cultures of biopsies of normal human testis show an expected low occurrence of apoptotic SPG (1 %) that increases to 3,4 % in peer samples exposed to VDT for the same period, with the appearance of apoptotic SPC (4,6 %). In samples from a thermically-impaired testis of the same subject the apoptotic occurrence of SPG is 2,6 % with 15,4 % for SPC after 24 h cultures. After 24 h exposure to VDT the apoptotic score is 7,6 % for SPG and 18,5 % for SPC in thermically impaired peer samples. With EMF-bioshields the apoptotic score for SPG is 0,8 % in normal 2,2 % for SPG and 13,8 % for SPC in T-impaired peer-samples. NMRS of the cultures fluids show a proportional production of lactate, corresponding to the different degrees of histopathological impairment of the samples. IVOS (Integrated Visual Optic System) analysis of sperm samples from thermically-impaired, not-repaired and repaired testes exposed to VDT shows sensible variations on straightness (STR), linearity (LIN) and lateral head displacement (LHD) parameters. To evaluate the thermic and non-thermic potential bioeffects of VDT on human spermatogenesis the specificity, the sensitivity and the reproducibility of the biological models on one side and the specificity of the methodologies on the other side must be provided. (author)

Ultrasound-guided interstitial laser photocoagulation of an autonomous thyroid nodule

DEFF Research Database (Denmark)

Døssing, Helle; Bennedbaek, Finn Noe; Hegedüs, Laszlo

2003-01-01

effects and often necessitates multiple treatment sessions. We present a case of a 17-year-old female successfully treated with ultrasound (US)-guided percutaneous interstitial laser photocoagulation (ILP) for an AFTN. Initially, she had a serum thyrotropin (TSH) of 0.01 mU/L and normal peripheral thyroid.......9 mL (40% reduction) without further alterations during an additional 9 months of follow-up. Side effects were transient thyrotoxicosis and local pain as seen with PEI. To our knowledge, this is the first reported case of ILP used in a patient with a pretoxic thyroid nodule. US-guided thermic tissue...

Deep gray matter demyelination detected by magnetization transfer ratio in the cuprizone model.

Directory of Open Access Journals (Sweden)

Sveinung Fjær

Full Text Available In multiple sclerosis (MS, the correlation between lesion load on conventional magnetic resonance imaging (MRI and clinical disability is weak. This clinico-radiological paradox might partly be due to the low sensitivity of conventional MRI to detect gray matter demyelination. Magnetization transfer ratio (MTR has previously been shown to detect white matter demyelination in mice. In this study, we investigated whether MTR can detect gray matter demyelination in cuprizone exposed mice. A total of 54 female C57BL/6 mice were split into one control group ( and eight cuprizone exposed groups ([Formula: see text]. The mice were exposed to [Formula: see text] (w/w cuprizone for up to six weeks. MTR images were obtained at a 7 Tesla Bruker MR-scanner before cuprizone exposure, weekly for six weeks during cuprizone exposure, and once two weeks after termination of cuprizone exposure. Immunohistochemistry staining for myelin (anti-Proteolopid Protein and oligodendrocytes (anti-Neurite Outgrowth Inhibitor Protein A was obtained after each weekly scanning. Rates of MTR change and correlations between MTR values and histological findings were calculated in five brain regions. In the corpus callosum and the deep gray matter a significant rate of MTR value decrease was found, [Formula: see text] per week ([Formula: see text] and [Formula: see text] per week ([Formula: see text] respectively. The MTR values correlated to myelin loss as evaluated by immunohistochemistry (Corpus callosum: [Formula: see text]. Deep gray matter: [Formula: see text], but did not correlate to oligodendrocyte density. Significant results were not found in the cerebellum, the olfactory bulb or the cerebral cortex. This study shows that MTR can be used to detect demyelination in the deep gray matter, which is of particular interest for imaging of patients with MS, as deep gray matter demyelination is common in MS, and is not easily detected on conventional clinical MRI.

Systematic review of community health impacts of mountaintop removal mining.

Science.gov (United States)

Boyles, Abee L; Blain, Robyn B; Rochester, Johanna R; Avanasi, Raghavendhran; Goldhaber, Susan B; McComb, Sofie; Holmgren, Stephanie D; Masten, Scott A; Thayer, Kristina A

2017-10-01

The objective of this evaluation is to understand the human health impacts of mountaintop removal (MTR) mining, the major method of coal mining in and around Central Appalachia. MTR mining impacts the air, water, and soil and raises concerns about potential adverse health effects in neighboring communities; exposures associated with MTR mining include particulate matter (PM), polycyclic aromatic hydrocarbons (PAHs), metals, hydrogen sulfide, and other recognized harmful substances. A systematic review was conducted of published studies of MTR mining and community health, occupational studies of MTR mining, and any available animal and in vitro experimental studies investigating the effects of exposures to MTR-mining-related chemical mixtures. Six databases (Embase, PsycINFO, PubMed, Scopus, Toxline, and Web of Science) were searched with customized terms, and no restrictions on publication year or language, through October 27, 2016. The eligibility criteria included all human population studies and animal models of human health, direct and indirect measures of MTR-mining exposure, any health-related effect or change in physiological response, and any study design type. Risk of bias was assessed for observational and experimental studies using an approach developed by the National Toxicology Program (NTP) Office of Health Assessment and Translation (OHAT). To provide context for these health effects, a summary of the exposure literature is included that focuses on describing findings for outdoor air, indoor air, and drinking water. From a literature search capturing 3088 studies, 33 human studies (29 community, four occupational), four experimental studies (two in rat, one in vitro and in mice, one in C. elegans), and 58 MTR mining exposure studies were identified. A number of health findings were reported in observational human studies, including cardiopulmonary effects, mortality, and birth defects. However, concerns for risk of bias were identified, especially

Weight Management, Energy Metabolism, and Endocrine Hor¬mones- Review Article

OpenAIRE

Seyed-Ali MOSTAFAVI; Saeed HOSSEINI

2015-01-01

Energy expenditure is determined by basal metabolic rate, physical activity, and Thermic Effect of Foods (TEF). Some endocrine hormones have role in basal metabolism and hence in human energy expenditure. And some foods pose more thermic effects on the total body energy expenditure and therefore can influence body weight. This review was performed to discuss factors which may affect body metabolism and body weight. Latest medical databases and nutrition and metabolism books were reviewed. We ...

Anticancer drug mithramycin interacts with core histones: An additional mode of action of the DNA groove binder

Directory of Open Access Journals (Sweden)

Amrita Banerjee

2014-01-01

Full Text Available Mithramycin (MTR is a clinically approved DNA-binding antitumor antibiotic currently in Phase 2 clinical trials at National Institutes of Health for treatment of osteosarcoma. In view of the resurgence in the studies of this generic antibiotic as a human medicine, we have examined the binding properties of MTR with the integral component of chromatin – histone proteins – as a part of our broad objective to classify DNA-binding molecules in terms of their ability to bind chromosomal DNA alone (single binding mode or both histones and chromosomal DNA (dual binding mode. The present report shows that besides DNA, MTR also binds to core histones present in chromatin and thus possesses the property of dual binding in the chromatin context. In contrast to the MTR–DNA interaction, association of MTR with histones does not require obligatory presence of bivalent metal ion like Mg2+. As a consequence of its ability to interact with core histones, MTR inhibits histone H3 acetylation at lysine 18, an important signature of active chromatin, in vitro and ex vivo. Reanalysis of microarray data of Ewing sarcoma cell lines shows that upon MTR treatment there is a significant down regulation of genes, possibly implicating a repression of H3K18Ac-enriched genes apart from DNA-binding transcription factors. Association of MTR with core histones and its ability to alter post-translational modification of histone H3 clearly indicates an additional mode of action of this anticancer drug that could be implicated in novel therapeutic strategies.

Magnetization transfer ratio relates to cognitive impairment in normal elderly

Directory of Open Access Journals (Sweden)

Stephan eSeiler

2014-09-01

Full Text Available Magnetization transfer imaging (MTI can detect microstructural brain tissue changes and may be helpful in determining age-related cerebral damage. We investigated the association between the magnetization transfer ratio (MTR in gray and white matter and cognitive functioning in 355 participants of the Austrian Stroke Prevention Family Study (ASPS-Fam aged 38 to 86 years. MTR maps were generated for the neocortex, deep gray matter structures, white matter hyperintensities, and normal appearing white matter. Adjusted mixed models determined whole brain and lobar cortical MTR to be directly and significantly related to performance on tests of memory, executive function and motor skills. There existed an almost linear dose-effect relationship. MTR of deep gray matter structures and normal appearing white matter correlated to executive functioning. All associations were independent of demographics, vascular risk factors, focal brain lesions and cortex volume.Further research is needed to understand the basis of this association at the tissue level, and to determine the role of MTR in predicting cognitive decline and dementia.

Analysis of a total flow blockage of a Fuel Assembly in a typical MTR Research Reactor by RELAP5/MOD3.3

International Nuclear Information System (INIS)

Adorni, M.; Salah, A.B.; Di Maro, B.; Pierro, F.; D'Auria, F.; Hamidouche, T.

2004-01-01

The lack of full understanding of complex mechanisms connected with the interaction between thermal-hydraulics and neutronics still challenge the design and the operation of nuclear reactors by the adoption of conservative safety limits. The recent availability of powerful computer and computational techniques together with the continuing increase in operational experience imposes the revisiting of those areas and eventually the identification of design/safety requirements that can be relaxed [1]. Currently, the enlarged commercial exploitation of nuclear Research Reactors (RR) has increased the consideration to their corresponding safety issues. Almost all of the safety analyses have so far been performed using conservative computational tools [2]. Nowadays, the application of Best-Estimate (BE) methods constitutes a real necessity in order to increase their commercial productivity. In this framework, an attempt is made to apply the BE technique to perform a safety evaluation under research reactors operational conditions. In fact, this technique has been largely verified and validated for power reactors using coupled system thermal-hydraulic and three-dimensional neutron kinetics [1]. For this purpose, as typical representative of research reactors, the IAEA 10 MW MTR Research Reactors problem [3] is considered. The system thermal-hydraulic RELAP5 [4] code was developed to simulate transient scenarios in Power reactors such PWR, BWR, VVER, etc. However, only limited work was performed to access the applicability of the code to Research Reactors operating conditions (low pressure, mass flow rates, power, etc) [5]. Previous works performed in this field are reported in [5], [6] and [7]. In this framework, total and partial blockage of a single Fuel Assembly cooling channel are investigated. As a first attempt the calculations are performed by applying the BE thermal-hydraulic system code RELAP5 alone using its point kinetic model to derive the instantaneous core

Methionine metabolism in apple tissue: implications of S-adenosylmethionine as an intermediate in the conversion of methionine to ethylene

International Nuclear Information System (INIS)

Adams, D.O.; Yang, S.F.

1977-01-01

If S-adenosylmethionine (SAM) is the direct precursor of ethylene as previously proposed, it is expected that 5'-S-methyl-5'-thioadenosine (MTA) would be the fragment nucleoside. When [Me- 14 C] or ( 35 S)methionine was fed to climacteric apple (Malus sylvestris Mill) tissue, radioactive 5-S-methyl-5-thioribose (MTR) was identified as the predominant product and MTA as a minor one. When the conversion of methionine into ethylene was inhibited by L-2-amino-4-(2'-amino-ethoxy)-trans-3-butenoic acid, the conversion of ( 35 S) or (Me- 14 C)methionine into MTR was similarly inhibited. Furthermore, the formation of MTA and MTR from ( 35 S)methionine was observed only in climacteric tissue which produced ethylene and actively converted methionine to ethylene but not in preclimacteric tissue which did not produce ethylene or convert methionine to ethylene. These observations suggest that the conversion of methionine into MTA and MTR is closely related to ethylene biosynthesis and provide indirect evidence that SAM may be an intermediate in the conversion of methionine to ethylene. When ( 35 S)MTA was fed to climacteric or preclimacteric apple tissue, radioactivity was efficiently incorporated into MTR and methionine. However, when ( 35 S)MTR was administered, radioactivity was efficiently incorporated into methionine but not MTA. A scheme is presented for the production of ethylene from methionine

Heterogeneity of passenger exposure to air pollutants in public transport microenvironments

Science.gov (United States)

Yang, Fenhuan; Kaul, Daya; Wong, Ka Chun; Westerdahl, Dane; Sun, Li; Ho, Kin-fai; Tian, Linwei; Brimblecombe, Peter; Ning, Zhi

2015-05-01

trips had the potential for higher integrated passenger exposure compared to MTR trips. The present study may provide useful information to better characterize the distribution of passenger exposure pattern in health assessment studies and the results also highlight the need to formulate exposure reduction based air policies in large cities.

Integrated Autonomous Network Management (IANM) Multi-Topology Route Manager and Analyzer

National Research Council Canada - National Science Library

Henderson, Thomas R; Bae, Kyle; Fang, Jin; Kushi, David M

2008-01-01

.... In a previous ONR research effort, Boeing and Cisco Systems had studied the applicability of MTR in the context of Navy network scenarios, and Boeing had produced a Linux-based prototype of MTR...

Characterization of Heme Proteins Involved in Microbial Exoelectric Activity and Small Molecule-Sensing

KAUST Repository

Vogler, Malvina M.

2018-01-01

Heme proteins, also termed cytochromes, are a widespread class of metalloproteins containing an Fe-protoporphyrin IX cofactor. They perform numerous functions in nature such as oxygen-transport by hemoglobin, monooxygenation reactions catalyzed by Cytochrome P-450, and electron transfer reactions during photosynthesis. The differences between proteincofactor binding characteristics and the cofactor environment greatly influence the extensive range of functions. In this dissertation, proteins from the Mtr pathway of Shewanella oneidensis are characterized. These c-type cytochromes contain multiple heme cofactors per protein molecule that covalently attach to the protein amino acid sequence and are involved in electron transfer to extracellular metal oxides during anaerobic conditions. Successful recombinant expression of pathway components MtrC and MtrA is achieved in Escherichia coli. Heme-dependent gel staining and UV/Vis spectroscopy show characteristic c-type cytochrome characteristics. Mass spectrometry confirms that the correct extensive post-translational modifications were performed and the ten heme groups were incorporated per protein of MtrC and MtrA and the correct lipid-anchor was attached to extracellular MtrC. Raman spectroscopy measurements of MtrA provide intriguing structural information and highlight the strong influence of the heme cofactors within the protein structure. Next, an Arabidopsis thaliana protein is analyzed. It was previously identified via a motif search of the plant genome, based on conserved residues in the H4 NOX pocket. Here, the incorporation of a heme b cofactor is confirmed. UV/Vis spectroscopy under anaerobic conditions demonstrates reversible binding of nitric oxide to the heme iron and depicts the previously published characteristic absorption maxima for other H-NOX proteins.

Role of C677T and A1298C MTHFR, A2756G MTR and -786 C/T eNOS gene polymorphisms in atrial fibrillation susceptibility.

Directory of Open Access Journals (Sweden)

Betti Giusti

Full Text Available BACKGROUND: Hyperhomocysteinemia has been suggested to play a role in the NonValvular Atrial Fibrillation (NVAF pathogenesis. Polymorphisms in genes coding for homocysteine (Hcy metabolism enzymes may be associated with hyperhomocysteinemia and NVAF. METHODOLOGIES: 456 NVAF patients and 912 matched controls were genotyped by an electronic microchip technology for C677T and A1298C MTHFR, A2756G MTR, and -786C/T eNOS gene polymorphisms. Hcy was determined by an immunoassay method. PRINCIPAL FINDINGS: The genotype distribution of the four polymorphisms as well as genotype combinations did not differ in patients and controls. Hcy was higher in patients than in controls (15.2, 95%CI 14.7-15.7 vs 11.3, 95%CI 11.0-11.6 micromol/L; p<0.0001. In both populations, a genotype-phenotype association (p<0.0001 between Hcy and C677T MTHFR polymorphism was observed; in controls a significant (p = 0.029 association between tHcy and -786C/T eNOS polymorphism was also observed. At the multivariate analysis the NVAF risk significantly increased in the upper quartiles of Hcy compared to the lowest: OR from 2.8 (1.68-4.54 95%CI in Q2 to 12.9 (7.96-21.06 95%CI in Q4. CONCLUSIONS: Our data demonstrated the four polymorphisms, although able, at least in part, to affect Hcy, were not associated with an increased risk of NVAF per se or in combination.

A Cool Urban Island Change 1990 - 2014. Comparative Bioclimatic Analysis in a Desert Climate, the Case of Antofagasta City Square

Science.gov (United States)

Pérez Lancellotti, Gino; Ziede Bize, Marcela

2017-10-01

This article proposes to make a comparative bioclimatic analysis from 1990 to 2014 of the main square of Antofagasta, a coastal desert city in Chile, which was remodelled in 1995, and shows how the redesigning of green areas affects the microclimatic conditions and thermal comfort of the urban space. Ex ante measurements dating 1990 were compared with ex post results from 2014. Data were obtained in both cases in the month of September at different times of a day and in different climate conditions. The variables studied were: land surface temperature, humidity, wind speed, amount of light and square use frequency inside the square and in surrounding streets. The temperatures are not statistically different during the years 1990 and 2014 for the city of Antofagasta. The main layout of the square has not changed, and inside the square it is similar for both periods, but new species were introduced and bigger trees with shadow projection were cut down. The square had a micro-climate role in 2014 as well as in 1990. The highest frequency zone with an important surface lost it is comfort thermic condition with an increase of 1°C. Other smaller zones with less relevance for users gained in cooling with a 0.5°C reduction. The new design has been detrimental to the intensity of its micro climatic regulatory function affecting the thermic comfort of the square’s internal spaces, especially those formerly protected by shadow, which mitigate a high solar radiation. The study results suggest that bio-climatic analysis of public open spaces is a key component for the design of future projects as a heat mitigating tool in the context of climate change. Research question is: How does the redesign of the square impact a cool urban island and the thermic comfort of users? Significant differences between data in situ collected in 1990 and 2014. Thermal comfort was negatively affected by the redesign in the square. The square is still a cool island but with less strength.

A Cajal body-independent pathway for telomerase trafficking in mice

International Nuclear Information System (INIS)

Tomlinson, Rebecca L.; Li, Jian; Culp, Bradley R.; Terns, Rebecca M.; Terns, Michael P.

2010-01-01

The intranuclear trafficking of human telomerase involves a dynamic interplay between multiple nuclear sites, most notably Cajal bodies and telomeres. Cajal bodies are proposed to serve as sites of telomerase maturation, storage, and assembly, as well as to function in the cell cycle-regulated delivery of telomerase to telomeres in human cells. Here, we find that telomerase RNA does not localize to Cajal bodies in mouse cells, and instead resides in separate nuclear foci throughout much of the cell cycle. However, as in humans, mouse telomerase RNA (mTR) localizes to subsets of telomeres specifically during S phase. The localization of mTR to telomeres in mouse cells does not require coilin-containing Cajal bodies, as mTR is found at telomeres at similar frequencies in cells from wild-type and coilin knockout mice. At the same time, we find that human TR localizes to Cajal bodies (as well as telomeres) in mouse cells, indicating that the distinct trafficking of mTR is attributable to an intrinsic property of the RNA (rather than a difference in the mouse cell environment such as the properties of mouse Cajal bodies). We also find that during S phase, mTR foci coalesce into short chains, with at least one of the conjoined mTR foci co-localizing with a telomere. These findings point to a novel, Cajal body-independent pathway for telomerase biogenesis and trafficking in mice.

A Cajal body-independent pathway for telomerase trafficking in mice

Energy Technology Data Exchange (ETDEWEB)

Tomlinson, Rebecca L.; Li, Jian; Culp, Bradley R.; Terns, Rebecca M., E-mail: rterns@bmb.uga.edu; Terns, Michael P., E-mail: mterns@bmb.uga.edu

2010-10-15

The intranuclear trafficking of human telomerase involves a dynamic interplay between multiple nuclear sites, most notably Cajal bodies and telomeres. Cajal bodies are proposed to serve as sites of telomerase maturation, storage, and assembly, as well as to function in the cell cycle-regulated delivery of telomerase to telomeres in human cells. Here, we find that telomerase RNA does not localize to Cajal bodies in mouse cells, and instead resides in separate nuclear foci throughout much of the cell cycle. However, as in humans, mouse telomerase RNA (mTR) localizes to subsets of telomeres specifically during S phase. The localization of mTR to telomeres in mouse cells does not require coilin-containing Cajal bodies, as mTR is found at telomeres at similar frequencies in cells from wild-type and coilin knockout mice. At the same time, we find that human TR localizes to Cajal bodies (as well as telomeres) in mouse cells, indicating that the distinct trafficking of mTR is attributable to an intrinsic property of the RNA (rather than a difference in the mouse cell environment such as the properties of mouse Cajal bodies). We also find that during S phase, mTR foci coalesce into short chains, with at least one of the conjoined mTR foci co-localizing with a telomere. These findings point to a novel, Cajal body-independent pathway for telomerase biogenesis and trafficking in mice.

Characteristics of lesional and extra-lesional cortical grey matter in relapsing-remitting and secondary progressive multiple sclerosis: A magnetisation transfer and diffusion tensor imaging study.

Science.gov (United States)

Yaldizli, Özgür; Pardini, Matteo; Sethi, Varun; Muhlert, Nils; Liu, Zheng; Tozer, Daniel J; Samson, Rebecca S; Wheeler-Kingshott, Claudia Am; Yousry, Tarek A; Miller, David H; Chard, Declan T

2016-02-01

In multiple sclerosis (MS), diffusion tensor and magnetisation transfer imaging are both abnormal in lesional and extra-lesional cortical grey matter, but differences between clinical subtypes and associations with clinical outcomes have only been partly assessed. To compare mean diffusivity, fractional anisotropy and magnetisation transfer ratio (MTR) in cortical grey matter lesions (detected using phase-sensitive inversion recovery (PSIR) imaging) and extra-lesional cortical grey matter, and assess associations with disability in relapse-onset MS. Seventy-two people with MS (46 relapsing-remitting (RR), 26 secondary progressive (SP)) and 36 healthy controls were included in this study. MTR, mean diffusivity and fractional anisotropy were measured in lesional and extra-lesional cortical grey matter. Mean fractional anisotropy was higher and MTR lower in lesional compared with extra-lesional cortical grey matter. In extra-lesional cortical grey matter mean fractional anisotropy and MTR were lower, and mean diffusivity was higher in the MS group compared with controls. Mean MTR was lower and mean diffusivity was higher in lesional and extra-lesional cortical grey matter in SPMS when compared with RRMS. These differences were independent of disease duration. In multivariate analyses, MTR in extra-lesional more so than lesional cortical grey matter was associated with disability. Magnetic resonance abnormalities in lesional and extra-lesional cortical grey matter are greater in SPMS than RRMS. Changes in extra-lesional compared with lesional cortical grey matter are more consistently associated with disability. © The Author(s), 2015.

Influence of beer marinades on the reduction of carcinogenic heterocyclic aromatic amines in charcoal-grilled pork meat.

Science.gov (United States)

Viegas, Olga; Moreira, Patrícia S; Ferreira, Isabel M P L V O

2015-01-01

The effect of beer marinades on the formation of heterocyclic aromatic amines (HAs) was examined in charcoal-grilled pork. Pilsner, non-alcoholic pilsner and black beers (coded respectively as PB, P0B and BB) were assayed and unmarinated samples cooked under similar conditions provided reference HAs levels. Two thermic (PhIP and 4,8-DiMeIQx) and three pyrolytic HAs (Trp-P-1, AαC, MeAαC) were quantified in unmarinated meat samples. Marinating meat in beer resulted in a significant decrease of PhIP, Trp-P-1 and AαC (p beers reduced total HA formation in charcoal-grilled pork, black beer being the most efficient with a level of 90% inhibition. A strong positive correlation was observed between the inhibitory effect of beer on total HA formation and their antioxidant activity. Beer marinades mitigate the impact of consumption of well-done grilled pork meat reducing the formation of cooking carcinogens.

Association of Human Methionine Synthase-A2756G Transition With Prostate Cancer: A Case-Control Study and in Silico Analysis

Directory of Open Access Journals (Sweden)

Arezou Ebrahimi

2017-07-01

Full Text Available Methionine synthase (MTR is one of the key enzymes of folate pathway, which play a key role in the construction, repair, and methylation of DNA. In this study, an association of MTR A2756G gene transition with prostate cancer in men populations of Kashan-Iran was investigated by a case-control study and an in silico analysis. The 200 samples including 100 patients with prostate cancer, as case group and 100 healthy men, as control group included in this study. MTR-A2756G genotyping was performed by PCR-RFLP technique. Some in silico tools used to evaluate the effects of A2756G transition on the structure and function of MTR. Results showed that the AG genotype (OR: 2.4014, 95% CI: 1.3216-4.3636, P=0.0040, and GG genotype (OR: 3.6324, 95% CI: 1.2629-10.4475, P=0.0167 and G allele (OR: 2.0120, 95% CI: 1.3098-3.0905, P=0.0014 were associated with prostate cancer. In silico analysis showed that polymorphisms of the enzyme protein might change properties of MTR such as relative mutability and flexibility, which leads to alteration of stability and function of the enzyme. Based on the results, an MTR-A2756G polymorphism which changes activity and stability of the methionine synthase associated with prostate cancer in men. It is a preliminary study and is presenting data for future comprehensive study for making a clinical conclusion that this gene transition is a biomarker for susceptibility to prostate cancer.

Migraineurs without aura show microstructural abnormalities in the cerebellum and frontal lobe.

Science.gov (United States)

Granziera, C; Romascano, D; Daducci, A; Roche, A; Vincent, M; Krueger, G; Hadjikhani, N

2013-12-01

The involvement of the cerebellum in migraine pathophysiology is not well understood. We used a biparametric approach at high-field MRI (3 T) to assess the structural integrity of the cerebellum in 15 migraineurs with aura (MWA), 23 migraineurs without aura (MWoA), and 20 healthy controls (HC). High-resolution T1 relaxation maps were acquired together with magnetization transfer images in order to probe microstructural and myelin integrity. Clusterwise analysis was performed on T1 and magnetization transfer ratio (MTR) maps of the cerebellum of MWA, MWoA, and HC using an ANOVA and a non-parametric clusterwise permutation F test, with age and gender as covariates and correction for familywise error rate. In addition, mean MTR and T1 in frontal regions known to be highly connected to the cerebellum were computed. Clusterwise comparison among groups showed a cluster of lower MTR in the right Crus I of MWoA patients vs. HC and MWA subjects (p = 0.04). Univariate and bivariate analysis on T1 and MTR contrasts showed that MWoA patients had longer T1 and lower MTR in the right and left pars orbitalis compared to MWA (p < 0.01 and 0.05, respectively), but no differences were found with HC. Lower MTR and longer T1 point at a loss of macromolecules and/or micro-edema in Crus I and pars orbitalis in MWoA patients vs. HC and vs. MWA. The pathophysiological implications of these findings are discussed in light of recent literature.

Export of detritus and invertebrate from headwater streams: linking mountaintop removal and valley fill coal mining to downstream receiving waters

Science.gov (United States)

Mountaintop removal and valley fill (MTR/VF) coal mining has resulted in large scale alteration of the topography, reduced forest productivity, and burial of headwater streams in the U.S. Central Appalachians. Although MTR/VF coal mining has occurred for several decades and the ...

Magnetisation transfer imaging of the normal adenohypophysis: the effect of sex and age

Energy Technology Data Exchange (ETDEWEB)

Argyropoulou, M.I.; Metafratzi, Z.; Efremidis, S.C. [Dept. of Radiology, Medical School, University of Ioannina (Greece); Kiortsis, D.N. [Lab. of Physiology, Medical School, University of Ioannina (Greece)

2001-04-01

Magnetisation transfer (MT) techniques provide tissue contrast depending mainly on the concentration of macromolecules. Because many macromolecules are involved in the secretory activity of the pituitary gland, MT techniques might be useful in the study of pituitary gland disorders. Our purpose was to establish a quantitative database of the MT ratio (MTR) of the normal adenohypophysis and to see whether there are age- and sex-related differences. Using a three-dimensional gradient-echo sequence for MT we studied the adenohypophysis in 56 males and 61 females aged 7 months-77 years; postsaturation images were obtained using an on-resonance binomial prepulse. The images were normal in all but three patients, two with meningiomas, one with a schwannoma. Adenohypophyseal MTR increased in both sexes up to 19 years of age (r = 0.47 males, 0.39 females, P < 0.05). In men after 20 years and in women from 20-49 years MTR decreased (r = -0.68, P < 0.001, r = -0.46, P < 0.05, respectively). In women aged 50-59 years the MTR again increased slightly. The MTR in males was slightly higher at all ages except before 9 and after 50 years of age. These differences were not statistically significant except in the 40-49 year group (P < 0.05). (orig.)

Magnetisation transfer imaging of the normal adenohypophysis: the effect of sex and age

International Nuclear Information System (INIS)

Argyropoulou, M.I.; Metafratzi, Z.; Efremidis, S.C.; Kiortsis, D.N.

2001-01-01

Magnetisation transfer (MT) techniques provide tissue contrast depending mainly on the concentration of macromolecules. Because many macromolecules are involved in the secretory activity of the pituitary gland, MT techniques might be useful in the study of pituitary gland disorders. Our purpose was to establish a quantitative database of the MT ratio (MTR) of the normal adenohypophysis and to see whether there are age- and sex-related differences. Using a three-dimensional gradient-echo sequence for MT we studied the adenohypophysis in 56 males and 61 females aged 7 months-77 years; postsaturation images were obtained using an on-resonance binomial prepulse. The images were normal in all but three patients, two with meningiomas, one with a schwannoma. Adenohypophyseal MTR increased in both sexes up to 19 years of age (r = 0.47 males, 0.39 females, P < 0.05). In men after 20 years and in women from 20-49 years MTR decreased (r = -0.68, P < 0.001, r = -0.46, P < 0.05, respectively). In women aged 50-59 years the MTR again increased slightly. The MTR in males was slightly higher at all ages except before 9 and after 50 years of age. These differences were not statistically significant except in the 40-49 year group (P < 0.05). (orig.)

Mutation of a Rice Gene Encoding a Phenylalanine Biosynthetic Enzyme Results in Accumulation of Phenylalanine and Tryptophan[W

Science.gov (United States)

Yamada, Tetsuya; Matsuda, Fumio; Kasai, Koji; Fukuoka, Shuichi; Kitamura, Keisuke; Tozawa, Yuzuru; Miyagawa, Hisashi; Wakasa, Kyo

2008-01-01

Two distinct biosynthetic pathways for Phe in plants have been proposed: conversion of prephenate to Phe via phenylpyruvate or arogenate. The reactions catalyzed by prephenate dehydratase (PDT) and arogenate dehydratase (ADT) contribute to these respective pathways. The Mtr1 mutant of rice (Oryza sativa) manifests accumulation of Phe, Trp, and several phenylpropanoids, suggesting a link between the synthesis of Phe and Trp. Here, we show that the Mtr1 mutant gene (mtr1-D) encodes a form of rice PDT with a point mutation in the putative allosteric regulatory region of the protein. Transformed callus lines expressing mtr1-D exhibited all the characteristics of Mtr1 callus tissue. Biochemical analysis revealed that rice PDT possesses both PDT and ADT activities, with a preference for arogenate as substrate, suggesting that it functions primarily as an ADT. The wild-type enzyme is feedback regulated by Phe, whereas the mutant enzyme showed a reduced feedback sensitivity, resulting in Phe accumulation. In addition, these observations indicate that rice PDT is critical for regulating the size of the Phe pool in plant cells. Feeding external Phe to wild-type callus tissue and seedlings resulted in Trp accumulation, demonstrating a connection between Phe accumulation and Trp pool size. PMID:18487352

Análisis de la operación del horno alto mediante la exergía térmica

Directory of Open Access Journals (Sweden)

Babich, A.

1998-05-01

Full Text Available In order to know the blast furnace thermic state, the thermic exergy can be used, which considers the temperatures level of the process. The magnitude analysis of thermic exergy for blast furnace operation using pulverized coal, natural gas and oxigen injection by tuyeres, shows that natural gas injection is less effective than pulverized coal and enriched blast with oxygen simultaneous injection.

Para conocer el estado térmico del horno alto se puede utilizar la exergía térmica, que considera el nivel de temperaturas del proceso. El análisis de la magnitud de la exergía térmica, para la operación del horno alto, utilizando inyecciones por toberas de carbón pulverizado, de gas natural y viento enriquecido en oxígeno, en ambos casos muestra que la inyección de gas natural es menos efectiva que la inyección simultánea de carbón pulverizado y viento enriquecido con oxígeno.

ELECTRODE SELECTION FOR RECOVERY OF THE CYLINDER LIDS OF THE TGM8K LOCOMITIVE ENGINE

Directory of Open Access Journals (Sweden)

Pablo Oñoz Gutiérrez

2017-01-01

Full Text Available The objective of this work was to determine the best-suited electrode to carry out the recovery of cylinder lids (cylinders heads of the TGM8K locomotives, by applying manual welding for electric arc. The test specimens of nodular cast iron, obtained from a discarded head, which were welded with two types electrodes, ENi-CI (UTP8 and ENiFe-CI ( UTP86FN following a technology of appropriate welding were prepared. The specimens were subject of thermic fatigue tests in an experimental installation created with this purpose, in which a process of heating and more severe cooling than in the head working conditions was simulated. During the thermic fatigue tests, in the specimens welded with electrodes ENi-CI appeared cracks at the thermic influence zone after 145 cycles, while in the specimens welded with electrodes ENiFe-CI, appeared at the 585 cycles on average. Based on the study results, the authors conclude that ENiFe-CI electrodes are the best-suited for the recovery of the cylinder lids.

Structural and functional characteristics of natural and constructed channels draining a reclaimed mountaintop removal and valley fill coal mine

Science.gov (United States)

Mountaintop removal and valley fill (MTR/VF) coal mining has altered the landscape of the Central Appalachian region in the United States. The goals of this study were to 1) compare the structure and function of natural and constructed stream channels in forested and MTR/VF catch...

Nonassociation of homocysteine gene polymorphisms with treatment outcome in South Indian Tamil Rheumatoid Arthritis patients.

Science.gov (United States)

Muralidharan, Niveditha; Gulati, Reena; Misra, Durga Prasanna; Negi, Vir S

2018-02-01

The aim of the study was to look for any association of MTR 2756A>G and MTRR 66A>G gene polymorphisms with clinical phenotype, methotrexate (MTX) treatment response, and MTX-induced adverse events in South Indian Tamil patients with rheumatoid arthritis (RA). A total of 335 patients with RA were investigated. MTR 2756A>G gene polymorphism was analyzed by PCR-RFLP, and MTRR 66A>G SNP was analyzed by TaqMan 5' nuclease assay. The allele frequencies were compared with HapMap groups. MTR 2756G allele was found to be associated with risk of developing RA. The allele frequencies of MTR 2756A>G and MTRR 66A>G SNPs in controls differed significantly when compared with HapMap groups. Neither of the SNPs influenced the MTX treatment outcome and adverse effects. Neither of the SNPs seems to be associated with MTX treatment outcome and adverse events in South Indian Tamil patients with RA.

Experimental Verification of the Fission Chamber Gamma Signal Suppression by the Campbelling Mode

International Nuclear Information System (INIS)

Vermeeren, L.; Weber, M.; Oriol, L.; Breaud, S.; Filliatre, P.; Geslot, B.; Jammes, C.; Normand, S.; Lescop, B.

2011-01-01

For the on-line monitoring of high fast neutron fluxes in the presence of a strong thermal neutron component, SCK-CEN and CEA are jointly developing a Fast Neutron Detector System, based on 242 Pu fission chambers as sensors and including dedicated electronics and data processing systems. Irradiation tests in the BR2 reactor of 242 Pu fission chambers operating in current mode showed that in typical MTR conditions the fission chamber currents are dominated by the gamma contribution. In order to reduce the gamma contribution to the signal, it was proposed to use the fission chambers in Campbelling mode. An irradiation experiment in the BR2 reactor with a 242 Pu and a 235 U fission chamber, both equipped with a suitable cable for measurements in Campbelling mode, proved the effectiveness of the suppression of the gamma-induced signal component by the Campbelling mode: gamma contribution reduction factors of 26 for the 235 U fission chamber and more than 80 for the 242 Pu fission chamber were obtained. The experimental data also prove that photofission contributions are negligibly small. Consequently, in typical MTR conditions the gamma contribution to the fission chamber Campbelling signal can be neglected. (authors)

Process and installation for heat recovery. Verfahren und Anlage zur Waermerueckgewinnung

Energy Technology Data Exchange (ETDEWEB)

Zeller, M.

1990-01-10

The patent describes a method for heat recovery from the warmer of two separately conducted streams of a fluid, whereby heat is recovered through a first heat exchanger in the warmer stream of medium, a heat transfer medium in a transmitting circuit and a second heat exchanger in the cooler stream of fluid, whereby the transmitting circuit includes both heat exchangers, characterized in that the recovered thermic output ({Delta}t.Q) is continuously detected and a regulation of the quantity (Q) of heat transfer medium in this circuit to maximum thermic output is effected. (author) 4 figs., 2 refs.

Influence of temperature in TL signal induced by gamma radiation in zircon prepared by sol gel via

International Nuclear Information System (INIS)

Salas, P.; Castano, V.M.; Mendoza A, D.; Gonzalez M, P.R.; Rosa C, E. de la

2000-01-01

In this work, it was realized a study of the temperature effects in thermoluminescent signal (Tl) induced by gamma radiation in zircon, which was prepared by the sol gel method. According to the obtained results, the zircon thermically treated at 500 C or over is sensitive to radiation. This sensitivity is increased when the temperature in study is augmented, moreover, the Tl spectra form also is modified with the temperature increment. The samples thermically treated at 750 C or over present a linear response in the dose interval 27 to 165 Gy; therefore, such materials result promissories for dosimetric purposes. (Author)

Influence of temperature in TL signal induced by gamma radiation in zircon prepared by sol gel via; Influencia de la temperatura en la senal TL inducida por la radiacion gamma en zirconia preparada via solgel

Energy Technology Data Exchange (ETDEWEB)

Salas, P.; Castano, V.M. [Instituto de Fisica, UNAM, Laboratorio Juriquilla, A.P. 1-1010, 76001 Queretaro (Mexico); Mendoza A, D.; Gonzalez M, P.R. [ININ, Mexico, D.F. (Mexico); Rosa C, E. de la [Centro de Investigaciones en Optical, Leon, Gto. (Mexico)

2000-07-01

In this work, it was realized a study of the temperature effects in thermoluminescent signal (Tl) induced by gamma radiation in zircon, which was prepared by the sol gel method. According to the obtained results, the zircon thermically treated at 500 C or over is sensitive to radiation. This sensitivity is increased when the temperature in study is augmented, moreover, the Tl spectra form also is modified with the temperature increment. The samples thermically treated at 750 C or over present a linear response in the dose interval 27 to 165 Gy; therefore, such materials result promissories for dosimetric purposes. (Author)

Predictors of upper trapezius pain with myofascial trigger points in food service workers

Science.gov (United States)

Hwang, Ui-Jae; Kwon, Oh-Yun; Yi, Chung-Hwi; Jeon, Hye-Seon; Weon, Jong-Hyuck; Ha, Sung-Min

2017-01-01

Abstract Shoulder pain occurs commonly in food service workers (FSWs) who repetitively perform motions of the upper limbs. Myofascial trigger points (MTrPs) on the upper trapezius (UT) are among the most common musculoskeletal shoulder pain syndromes. This study determined the psychological, posture, mobility, and strength factors associated with pain severity in FSWs with UT pain due to MTrPs. In this cross-sectional study, we measured 17 variables in 163 FSWs with UT pain due to MTrPs: a visual analog scale (VAS) pain score, age, sex, Borg rating of perceived exertion (BRPE) scale, beck depression inventory, forward head posture angle, rounded shoulder angle (RSA), shoulder slope angle, scapular downward rotation ratio, cervical lateral-bending side difference angle, cervical rotation side difference angle, glenohumeral internal rotation angle, shoulder horizontal adduction angle, serratus anterior (SA) strength, lower trapezius (LT) strength, bicep strength, and glenohumeral external rotator strength, in 163 FSWs with UT pain due to MTrPs. The model for factors influencing UT pain with MTrPs included SA strength, age, BRPE, LT strength, and RSA as predictor variables that accounted for 68.7% of the variance in VAS (P < .001) in multiple regression models with a stepwise selection procedure. The following were independent variables influencing the VAS in the order of standardized coefficients: SA strength (β = −0.380), age (β = 0.287), BRPE (β = 0.239), LT strength (β = −0.195), and RSA (β = 0.125). SA strength, age, BRPE, LT strength, and RSA variables should be considered when evaluating and intervening in UT pain with MTrPs in FSWs. PMID:28658117

Predictors of upper trapezius pain with myofascial trigger points in food service workers: The STROBE study.

Science.gov (United States)

Hwang, Ui-Jae; Kwon, Oh-Yun; Yi, Chung-Hwi; Jeon, Hye-Seon; Weon, Jong-Hyuck; Ha, Sung-Min

2017-06-01

Shoulder pain occurs commonly in food service workers (FSWs) who repetitively perform motions of the upper limbs. Myofascial trigger points (MTrPs) on the upper trapezius (UT) are among the most common musculoskeletal shoulder pain syndromes. This study determined the psychological, posture, mobility, and strength factors associated with pain severity in FSWs with UT pain due to MTrPs.In this cross-sectional study, we measured 17 variables in 163 FSWs with UT pain due to MTrPs: a visual analog scale (VAS) pain score, age, sex, Borg rating of perceived exertion (BRPE) scale, beck depression inventory, forward head posture angle, rounded shoulder angle (RSA), shoulder slope angle, scapular downward rotation ratio, cervical lateral-bending side difference angle, cervical rotation side difference angle, glenohumeral internal rotation angle, shoulder horizontal adduction angle, serratus anterior (SA) strength, lower trapezius (LT) strength, bicep strength, and glenohumeral external rotator strength, in 163 FSWs with UT pain due to MTrPs.The model for factors influencing UT pain with MTrPs included SA strength, age, BRPE, LT strength, and RSA as predictor variables that accounted for 68.7% of the variance in VAS (P < .001) in multiple regression models with a stepwise selection procedure. The following were independent variables influencing the VAS in the order of standardized coefficients: SA strength (β = -0.380), age (β = 0.287), BRPE (β = 0.239), LT strength (β = -0.195), and RSA (β = 0.125).SA strength, age, BRPE, LT strength, and RSA variables should be considered when evaluating and intervening in UT pain with MTrPs in FSWs.

Improving the characterization of radiologically isolated syndrome suggestive of multiple sclerosis.

Directory of Open Access Journals (Sweden)

Nicola De Stefano

Full Text Available OBJECTIVE: To improve the characterization of asymptomatic subjects with brain magnetic resonance imaging (MRI abnormalities highly suggestive of multiple sclerosis (MS, a condition named as "radiologically isolated syndrome" (RIS. METHODS: Quantitative MRI metrics such as brain volumes and magnetization transfer (MT were assessed in 19 subjects previously classified as RIS, 20 demographically-matched relapsing-remitting MS (RRMS patients and 20 healthy controls (HC. Specific measures were: white matter (WM lesion volumes (LV, total and regional brain volumes, and MT ratio (MTr in lesions, normal-appearing WM (NAWM and cortex. RESULTS: LV was similar in RIS and RRMS, without differences in distribution and frequency at lesion mapping. Brain volumes were similarly lower in RRMS and RIS than in HC (p<0.001. Lesional-MTr was lower in RRMS than in RIS (p = 0.048; NAWM-MTr and cortical-MTr were similar in RIS and HC and lower (p<0.01 in RRMS. These values were particularly lower in RRMS than in RIS in the sensorimotor and memory networks. A multivariate logistic regression analysis showed that 13/19 RIS had ≥70% probability of being classified as RRMS on the basis of their brain volume and lesional-MTr values. CONCLUSIONS: Macroscopic brain damage was similar in RIS and RRMS. However, the subtle tissue damage detected by MTr was milder in RIS than in RRMS in clinically relevant brain regions, suggesting an explanation for the lack of clinical manifestations of subjects with RIS. This new approach could be useful for narrowing down the RIS individuals with a high risk of progression to MS.

Amide proton transfer imaging for differentiation of benign and atypical meningiomas

Energy Technology Data Exchange (ETDEWEB)

Joo, Bio [The Armed Forces Capital Hospital, Department of Radiology, Seongnam, Gyeonggi-do (Korea, Republic of); Han, Kyunghwa; Choi, Yoon Seong; Lee, Seung-Koo [Yonsei University College of Medicine, Department of Radiology and Research Institute of Radiological Science, College of Medicine, Seoul (Korea, Republic of); Ahn, Sung Soo [Yonsei University College of Medicine, Department of Radiology and Research Institute of Radiological Science, College of Medicine, Seoul (Korea, Republic of); Yonsei University, Department of Radiology, College of Medicine, Seoul (Korea, Republic of); Chang, Jong Hee; Kang, Seok-Gu [Yonsei University College of Medicine, Department of Neurosurgery, Seoul (Korea, Republic of); Kim, Se Hoon [Yonsei University College of Medicine, Department of Pathology, Seoul (Korea, Republic of); Zhou, Jinyuan [Johns Hopkins University School of Medicine, Division of MRI Research, Department of Radiology, Baltimore, MD (United States)

2018-01-15

To investigate the difference in amide proton transfer (APT)-weighted signals between benign and atypical meningiomas and determine the value of APT imaging for differentiating the two. Fifty-seven patients with pathologically diagnosed meningiomas (benign, 44; atypical, 13), who underwent preoperative MRI with APT imaging between December 2014 and August 2016 were included. We compared normalised magnetisation transfer ratio asymmetry (nMTR{sub asym}) values between benign and atypical meningiomas on APT-weighted images. Conventional MRI features were qualitatively assessed. Both imaging features were evaluated by multivariable logistic regression analysis. The discriminative value of MRI with and without nMTR{sub asym} was evaluated. The nMTR{sub asym} of atypical meningiomas was significantly greater than that of benign meningiomas (2.46% vs. 1.67%; P < 0.001). In conventional MR images, benign and atypical meningiomas exhibited significant differences in maximum tumour diameter, non-skull base location, and heterogeneous enhancement. On multivariable logistic regression analysis, high nMTR{sub asym} was an independent predictor of atypical meningiomas (adjusted OR, 11.227; P = 0.014). The diagnostic performance of MRI improved with nMTR{sub asym} for predicting atypical meningiomas. Atypical meningiomas exhibited significantly higher APT-weighted signal intensities than benign meningiomas. The discriminative value of conventional MRI improved significantly when combined with APT imaging for diagnosis of atypical meningioma. (orig.)

Physiological and transcriptional approaches reveal connection between nitrogen and manganese cycles in Shewanella algae C6G3

Science.gov (United States)

Aigle, Axel; Bonin, Patricia; Iobbi-Nivol, Chantal; Méjean, Vincent; Michotey, Valérie

2017-03-01

To explain anaerobic nitrite/nitrate production at the expense of ammonium mediated by manganese oxide (Mn(IV)) in sediment, nitrate and manganese respirations were investigated in a strain (Shewanella algae C6G3) presenting these features. In contrast to S. oneidensis MR-1, a biotic transitory nitrite accumulation at the expense of ammonium was observed in S. algae during anaerobic growth with Mn(IV) under condition of limiting electron acceptor, concomitantly, with a higher electron donor stoichiometry than expected. This low and reproducible transitory accumulation is the result of production and consumption since the strain is able to dissimilative reduce nitrate into ammonium. Nitrite production in Mn(IV) condition is strengthened by comparative expression of the nitrate/nitrite reductase genes (napA, nrfA, nrfA-2), and rates of the nitrate/nitrite reductase activities under Mn(IV), nitrate or fumarate conditions. Compared with S. oneidensis MR-1, S. algae contains additional genes that encode nitrate and nitrite reductases (napA-α and nrfA-2) and an Outer Membrane Cytochrome (OMC)(mtrH). Different patterns of expression of the OMC genes (omcA, mtrF, mtrH and mtrC) were observed depending on the electron acceptor and growth phase. Only gene mtrF-2 (SO1659 homolog) was specifically expressed under the Mn(IV) condition. Nitrate and Mn(IV) respirations seem connected at the physiological and transcriptional levels.

Evaluation of magnetization transfer ratios for breast tissues and breast diseases

Energy Technology Data Exchange (ETDEWEB)

Sasaki, Fumio; Murai, Hiroshi; Takeuchi, Thouru; Iwase, Takuji; Miura, Shigeto; Mastushima, Shigeru; Oosaki, Hikaru [Aichi Cancer Center, Nagoya (Japan). Hospital; Kinosada, Yasuomi

1997-03-01

To determine MTRs for normal structures and benign diseases in the breast two-dimensional magnetization transfer imaging was performed in 62 patients and in 3 young female volunteers. With regard to the MTRs of measurements in the normal breast tissues, fat tissues which is close to simple cysts in MTRs show little transfer of longitudinal magnetization. MTRs of the muscles was 15.15{+-}6.22%, which exceeded those of breast parenchyma. The breast parenchyma didn`t show the change of MTR value due to the difference of patient age and due to variable amount of fat and fibrous tissues. Breast parenchyma in the two young volunteers clearly showed biphasic change of MTR values in accordance with the menstrual cycle; little transfer value was due to hydration in the postovulatory period and high transfer value was due to dehydration in the preovulatory period. In the remaining one volunteer during lactation period, mammary parenchyma shows sever decrease in MTR, because mammary gland is loaded with massive fluid, showing a very high signal intensity on First IR and T2-weighted images. MTR values of benign breast diseases including mastopathy, fibroadenoma and phyllodes tumor had no significant difference from those of the breast parenchyma and muscle. Non-invasive ductal carcinoma was equivalent to breast parenchyma in MTR. (K.H.)

Biogas recovery from tanning sludges. Anaerobic digestion of lime fleshings, tanning sludge, and unhairing baths, laboratory and pilot scale results

Energy Technology Data Exchange (ETDEWEB)

Fendrup, W.; Hansen, S.; Petersen, G.

1983-11-01

Mesophilic anaerobic digestion of various types of tannery and other wastes, separately or in mixtures, has been investigated. The following materials were used: Lime fleshings, Tannery sludge, Beamhouse sludge, Municipal sludge, Chrome leather shavings, Liquid manure. The investigations have shown anaerobic digestion to be possible with untanned tannery wastes as well as tannery effluent sludge as a substrate. Specially high gas yields were found by digestion of mixtures of tannery wastes and manure. This may be applicable to mixtures of tannery wastes and municipal sludge, too. The gas contains 0.5 - 1.0% H2S. About 25% of the gross energy (methane) output is used for sustaining the temperature necessary for the digestion together with the mixing and conveying of the material to be digested. If electricity is produced, 25% of the gross output is obtained as useful electric energy and 35% as useful thermic energy. If the gas is burned, 60% of the gross output is obtained as useful thermic energy. With the price relations found in most countries (e.g. Denmark, Finland and Sweden) it will be most profitable to produce electricity, whereas in some cases (e.g. Norway) the opposite may be true. The energy requirement of a typic Scandinavian tannery is 14.200 MJ/t rawhide as thermic energy and 2.300 MJ/t rawhide as electric energy, which means that maximum 14% of the thermic energy requirement or maximum 35% of the electricity requirement could be covered by the wastes digestion. Profitability calculations are made for each Scandinavian country. The calculations show that too small digestion plants are not profitable.

Study of wine-growing land ('terroirs') characteristics in the canton of Vaud (Switzerland): modelization of the climatical parameters

International Nuclear Information System (INIS)

Pythoud, K.

2004-01-01

As part of a study on the viticultural terroirs of 'canton de Vaud', a climatic model integrating temperature, relief, radiation and pluviometry was built. The climate is defined by pluviometry and the thermical gradient. For standard needs, climatic parameters are determined at small scale (b 1/300'000), which is not accurate for the study of the mesoclimate. The adopted approach uses a digital elevation model with a resolution of 25 meters, the DEM25 of the Swiss Federal Office of Topography, at 1/25'000 scale. The thermical gradient is deduced from solar radiation, wind effect estimations and an empirical model of thermical altitudinal distribution. The radiation is calculated with a model that integrates the effects of the surrounding relief (slope, exposition and casted shadow) and the sun height above the horizon during a specific period. The relief shape and the principal wind directions based on a regional cartography allowed to estimate wind effect. Then climatic parameters are calculated for critical periods in the vineyard's vegetative cycle. A comparison with the map of thermical levels of 'canton de Vaud', determined on the basis of a phenological survey, allows to adjust the microclimate model. The rainfall distribution is the result of a data regionalization coming from Meteoswiss stations network. The calculation was based on the monthly rainfall values collected in the stations near or inside the vineyard during the last 30 years. The final climatic zoning is a weighting of the previous mentioned variables. Its value is more qualitative than quantitative. It offers however a comparison basis between the different regions concerned by the study

Flux effect on neutron irradiation embrittlement of reactor pressure vessel steels irradiated to high fluences

International Nuclear Information System (INIS)

Soneda, N.; Dohi, K.; Nishida, K.; Nomoto, A.; Iwasaki, M.; Tsuno, S.; Akiyama, T.; Watanabe, S.; Ohta, T.

2011-01-01

Neutron irradiation embrittlement of reactor pressure vessel (RPV) steels is of great concern for the long term operation of light water reactors. In particular, the embrittlement of the RPV steels of pressurized water reactors (PWRs) at very high fluences beyond 6*10 19 n/cm 2 , E > 1 MeV, needs to be understood in more depth because materials irradiated in material test reactors (MTRs) to such high fluences show larger shifts than predicted by current embrittlement correlation equations available worldwide. The primary difference between the irradiation conditions of MTRs and surveillance capsules is the neutron flux. The neutron flux of MTR is typically more than one order of magnitude higher than that of surveillance capsule, but it is not necessarily clear if this difference in neutron flux causes difference in mechanical properties of RPV. In this paper, we perform direct comparison, in terms of mechanical property and microstructure, between the materials irradiated in surveillance capsules and MTRs to clarify the effect of flux at very high fluences and fluxes. We irradiate the archive materials of some of the commercial reactors in Japan in the MTR, LVR-15, of NRI Rez, Czech Republic. Charpy impact test results of the MTR-irradiated materials are compared with the data from surveillance tests. The comparison of the results of microstructural analyses by means of atom probe tomography is also described to demonstrate the similarity / differences in surveillance and MTR-irradiated materials in terms of solute atom behavior. It appears that high Cu material irradiated in a MTR presents larger shifts than those of surveillance data, while low Cu materials present similar embrittlement. The microstructural changes caused by MTR irradiation and surveillance irradiation are clearly different

Serial contrast-enhanced magnetic resonance and magnetization transfer in the study of patients with multiple sclerosis

International Nuclear Information System (INIS)

Rovira, A.; Alonso, J.; Cucurella, G.; Nos, C.; Tintore, M.; Pedraza, S.; Rio, J.; Montalban, X.

1997-01-01

To demonstrate the changes in the magnetization transfer ratio (MTR) of different demyelinating plaques, correlating them with the baseline values in T1-weighted contrast-enhanced magnetic resonance (MR) sequences in order to relate them more closely to the underlying disease. The study was based on 33 demyelinating plaques obtained from six patients clinically diagnosed as having remitting-recurring multiple sclerosis (MS). All the patients underwent two MR studies at a 3 to 5-month interval, including contrast-enhanced T1 and T2- weighted sequences and magnetization transfer images. The latter were used to calculate the MTR for each of the demyelinating plaques included in the study. The statistical analysis of the results obtained revealed statistically significant between initial MTR values and those of subsequent T1-weighted sequences. The MTR demonstrate significant differences between plaques according to contrast-enhanced T1-weigh tes sequences, probably indicating variable degrees of edema, demyelination and tissue destruction. These differences should be taken into account to enable the use of T1-weighted sequences to quantify the lesion load in MS patients. (Author) 35 refs

Anatomical Basis of the Myofascial Trigger Points of the Gluteus Maximus Muscle

Directory of Open Access Journals (Sweden)

Flavia Emi Akamatsu

2017-01-01

Full Text Available Myofascial pain syndrome is characterized by pain and limited range of motion in joints and caused by muscular contracture related to dysfunctional motor end plates and myofascial trigger points (MTrPs. We aimed to observe the anatomical correlation between the clinically described MTrPs and the entry point of the branches of the inferior gluteal nerve into the gluteus maximus muscle. We dissected twenty gluteus maximus muscles from 10 human adult cadavers (5 males and 5 females. We measured the muscles and compiled the distribution of the nerve branches into each of the quadrants of the muscle. Statistical analysis was performed by using Student’s t-test and Kruskal-Wallis tests. Although no difference was observed either for muscle measurements or for distribution of nerve branching among the subjects, the topography of MTrPs matched the anatomical location of the entry points into the muscle. Thus, anatomical substract of the MTrPs may be useful for a better understanding of the physiopathology of these disorders and provide basis for their surgical and clinical treatment.

Methionine salvage pathway in relation to ethylene biosynthesis

International Nuclear Information System (INIS)

Miyazaki, J.H.

1987-01-01

The recycling of methionine during ethylene biosynthesis (the methionine cycle) was studied. During ethylene biosynthesis, the H 3 CS-group of S-adenosylmethionine (SAM) is released at 5'-methylthioadenosine (MTA), which is recycled to methionine via 5'-methylthioribose (MTS). In mungbean hypocotyls and cell-free extracts of avocado fruit, [ 14 C]MTR was converted to labeled methionine via 2-keto-4-methylthiobutyric acid (KMB) and 2-hydroxy-4-methylthiobutyric acid (HMB) as intermediates. Radioactive tracer studies showed that KMB was converted readily in vivo and in vitro to methionine, while HMB was converted much more slowly. The conversion of KMB to methionine by dialyzed avocado extract required an amino group donor. Among several potential donors tested, L-glutamine was the most efficient. Incubation of [ribose-U- 14 C]MTR with avocado extract resulted in the production of [ 14 C]formate, with little evolution of other 14 C-labeled one-carbon compounds, indicating that the conversion of MTR to KMB involves a loss of formate, presumably from C-1 of MTR

Serial contrast-enhanced magnetic resonance and magnetization transfer in the study of patients with multiple sclerosis; Resonancia magnetica con contraste y transferencia de magnetizacion en el estudio seriado de pacientes con esclerosis multiple

Energy Technology Data Exchange (ETDEWEB)

Rovira, A; Alonso, J; Cucurella, G; Nos, C; Tintore, M; Pedraza, S; Rio, J; Montalban, X [Hospital General i Universitari Vall d` Hebron. Barcelona (Spain)

1998-12-31

To demonstrate the changes in the magnetization transfer ratio (MTR) of different demyelinating plaques, correlating them with the baseline values in T1-weighted contrast-enhanced magnetic resonance (MR) sequences in order to relate them more closely to the underlying disease. The study was based on 33 demyelinating plaques obtained from six patients clinically diagnosed as having remitting-recurring multiple sclerosis (MS). All the patients underwent two MR studies at a 3 to 5-month interval, including contrast-enhanced T1 and T2- weighted sequences and magnetization transfer images. The latter were used to calculate the MTR for each of the demyelinating plaques included in the study. The statistical analysis of the results obtained revealed statistically significant between initial MTR values and those of subsequent T1-weighted sequences. The MTR demonstrate significant differences between plaques according to contrast-enhanced T1-weigh tes sequences, probably indicating variable degrees of edema, demyelination and tissue destruction. These differences should be taken into account to enable the use of T1-weighted sequences to quantify the lesion load in MS patients. (Author) 35 refs.

Epinephrine mediates facultative carbohydrate-induced thermogenesis in human skeletal muscle

DEFF Research Database (Denmark)

Astrup, A; Simonsen, L; Bülow, J

1989-01-01

The thermic effect of carbohydrate has a component mediated by the sympathoadrenal system but of unknown anatomical localization. We have studied the contribution of skeletal muscle to the thermic effect of a carbohydrate-rich natural meal (115 g of carbohydrate, approximately 80% of energy...... postprandially and coinciding with the peak in arterial epinephrine. The present study provides evidence of a facultative thermogenic component in skeletal muscle, mediated by epinephrine via beta 2-adrenoreceptors. However, it also points to a nonmuscle component mediated through beta 1-adrenoceptors...... by norepinephrine released from the sympathetic nervous system. Consequently, the sympathoadrenal system seems to play a physiological role in the daily energy balance....

Programming the quorum sensing-based AND gate in Shewanella oneidensis for logic gated-microbial fuel cells.

Science.gov (United States)

Hu, Yidan; Yang, Yun; Katz, Evgeny; Song, Hao

2015-03-11

An AND logic gate based on a synthetic quorum-sensing (QS) module was constructed in a Shewanella oneidensis MR-1 mtrA knockout mutant. The presence of two input signals activated the expression of a periplasmic decaheme cytochrome MtrA to regenerate the extracellular electron transfer conduit, enabling the construction of AND-gated microbial fuel cells.

Assessment of the patellofemoral cartilage: Correlation of knee pain score with magnetic resonance cartilage grading and magnetization transfer ratio asymmetry of glycosaminoglycan chemical exchange saturation transfer.

Science.gov (United States)

Lee, Young Han; Yang, Jaemoon; Jeong, Ha-Kyu; Suh, Jin-Suck

2017-01-01

Biochemical imaging of glycosaminoglycan chemical exchange saturation transfer (gagCEST) could predict the depletion of glycosaminoglycans (GAG) in early osteoarthritis. The purpose of this study was to evaluate the relationship between the magnetization transfer ratio asymmetry (MTR asym ) of gagCEST images and visual analog scale (VAS) pain scores in the knee joint. This retrospective study was approved by the institutional review board. A phantom study was performed using hyaluronic acid to validate the MTR asym values of gagCEST images. Knee magnetic resonance (MR) images of 22 patients (male, 9; female, 13; mean age, 50.3years; age range; 25-79years) with knee pain were included in this study. The MR imaging (MRI) protocol involved standard knee MRI as well as gagCEST imaging, which allowed region-of-interest analyses of the patellar facet and femoral trochlea. The MTR asym at 1.0ppm was calculated at each region. The cartilages of the patellar facets and femoral trochlea were graded according to the Outerbridge classification system. Data regarding the VAS scores of knee pain were collected from the electronic medical records of the patients. Statistical analysis was performed using Spearman's correlation. The results of the phantom study revealed excellent correlation between the MTR asym values and the concentration of GAGs (r=0.961; p=0.003). The cartilage grades on the MR images showed significant negative correlation with the MTR asym values in the patellar facet and femoral trochlea (r=-0.460; p=0.031 and r=-0.543; p=0.009, respectively). The VAS pain scores showed significant negative correlation with the MTR asym values in the patellar facet and femoral trochlea (r=-0.435; p=0.043 and r=-0.671; p=0.001, respectively). The pain scores were associated with the morphological and biochemical changes in articular cartilages visualized on knee MR images. The biochemical changes, visualized in terms of the MTR asym values of the gagCEST images, exhibited

Epidemiologia delle resistenze di Helicobacter pylori alle sostanze antibatteriche piú utilizzate nella terapia di eradicazione (Ospedale di Merano 1998 – 2002

Directory of Open Access Journals (Sweden)

Mario V. Zanetti

2003-09-01

Full Text Available Bacterial resistance to antibiotics represents one of the most important factors of treatment failure for infectious diseases. In Helicobacter pylori (HP infection, this aspect is of dramatic importance when considering eradication therapy which according to the most recent consensus conference implies an association of a proton pump inhibitor (PPI and two antibiotics (mainly nitromidazoles, macrolides and beta-lactames. Beside the strong recommendation after treatment failure, in-vitro test of resistance of the mostly used antibiotics, has gained also an increasing importance over time due to the progressive increase of resistance observed with most used substances as, for example, macrolides. Metronidazole (MTR and Clarithromycin (CLA are almost routinely tested in our laboratory in cultures from HPpositive gastric biopsies using the disk diffusion technique (fig. 1, in-vitro resistance to Amoxicillin (AMX is only tested if specifically requested from the clinician. A retrospective analysis of culture results from gastric biopsies taken during gastroscopy performed in the endoscopy unit of our hospital over the last quinquennial, allowed us to monitor the prevalence of HP resistance to MTR e CLA and to assess their possible relationship with age and gender. Furthermore we studied the impact of resistance on typer of eradication therapy as well as the onset of secondary resistance and the stability of CLA resistance. We have therefore considered an overall number of 1039 HP-positive cultures. Among them, 54,3% were resistant to both antibiotics being 34,7% resistant to MTR, and 18,6% resistant to CLA, and 12,1% resistant to both substances (fig.2. According to gender, data on antibiotic resistance of HP, show no difference for CLA (17,2% for and 20,1% for , whereas MTR resistance is significantly more frequently observed in women ( 29,3% for and 40,1%. This result may probably be related to the use of MTR by ginecologist for pelvic infection

Effectiveness of trigger point dry needling for plantar heel pain: a meta-analysis of seven randomized controlled trials

Directory of Open Access Journals (Sweden)

He C

2017-08-01

Full Text Available Chunhui He,1,* Hua Ma2,* 1Internal Medicine of Traditional Chinese Medicine, 2Medical Image Center, The First Affiliated Hospital of Xinjiang Medical University, Wulumuqi, People’s Republic of China *These authors contributed equally to this work Background: Plantar heel pain can be managed with dry needling of myofascial trigger points (MTrPs; however, whether MTrP needling is effective remains controversial. Thus, we conducted this meta-analysis to evaluate the effect of MTrP needling in patients with plantar heel pain. Materials and methods: PubMed, Embase, Web of Science, SinoMed (Chinese BioMedical Literature Service System, People’s Republic of China, and CNKI (National Knowledge Infrastructure, People’s Republic of China databases were systematically reviewed for randomized controlled trials (RCTs that assessed the effects of MTrP needling. Pooled weighted mean difference (WMD with 95% CIs were calculated for change in visual analog scale (VAS score, and pooled risk ratio (RR with 95% CIs were calculated for success rate for pain and incidence of adverse events. A fixed-effects model or random-effects model was used to pool the estimates, depending on the heterogeneity among the included studies. Results: Extensive literature search yielded 1,941 articles, of which only seven RCTs met the inclusion criteria and were included in this meta-analysis. The pooled results showed that MTrP needling significantly reduced the VAS score (WMD =–15.50, 95% CI: –19.48, –11.53; P<0.001 compared with control, but it had a similar success rate for pain with control (risk ratio [RR] =1.15, 95% CI: 0.87, 1.51; P=0.320. Moreover, MTrP needling was associated with a similar incidence of adverse events with control (RR =1.89, 95% CI: 0.38, 9.39; P=0.438. Conclusion: MTrP needling effectively reduced the heel pain due to plantar fasciitis. However, considering the potential limitations in this study, more large-scale, adequately powered, good

Quantitative Ultrasound Using Texture Analysis of Myofascial Pain Syndrome in the Trapezius.

Science.gov (United States)

Kumbhare, Dinesh A; Ahmed, Sara; Behr, Michael G; Noseworthy, Michael D

2018-01-01

Objective-The objective of this study is to assess the discriminative ability of textural analyses to assist in the differentiation of the myofascial trigger point (MTrP) region from normal regions of skeletal muscle. Also, to measure the ability to reliably differentiate between three clinically relevant groups: healthy asymptomatic, latent MTrPs, and active MTrP. Methods-18 and 19 patients were identified with having active and latent MTrPs in the trapezius muscle, respectively. We included 24 healthy volunteers. Images were obtained by research personnel, who were blinded with respect to the clinical status of the study participant. Histograms provided first-order parameters associated with image grayscale. Haralick, Galloway, and histogram-related features were used in texture analysis. Blob analysis was conducted on the regions of interest (ROIs). Principal component analysis (PCA) was performed followed by multivariate analysis of variance (MANOVA) to determine the statistical significance of the features. Results-92 texture features were analyzed for factorability using Bartlett's test of sphericity, which was significant. The Kaiser-Meyer-Olkin measure of sampling adequacy was 0.94. PCA demonstrated rotated eigenvalues of the first eight components (each comprised of multiple texture features) explained 94.92% of the cumulative variance in the ultrasound image characteristics. The 24 features identified by PCA were included in the MANOVA as dependent variables, and the presence of a latent or active MTrP or healthy muscle were independent variables. Conclusion-Texture analysis techniques can discriminate between the three clinically relevant groups.

Viability study for application of combined reheater cycle (CRC) to fluidized bed combustion plants; Estudio de Viabilidad para la Aplicacion del Ciclo de Recalentamiento Combinado (CRC) a Plantas de Combustion de Lecho Fuido Atmosferico

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-01

Basically, the project try to analyze the application viability of a first reheating in steam cycles of little power plants, useful mainly for biomass and wastes, in our case with coal blends; and a second reheating of the steam in conventional and fluidized bed combustion plants. Using in both cases the thermic energy of the exhaust gases from one gas turbine. The advantages of the CRC cycle are: (1) Reduction of the moisture in the turbine, increasing the energy efficiency and blade protection. (2) To take advantage of the waste gas energy from the gas turbine in optimum way. (3) Great operation flexibility under good efficiency results. In general, the system can use the synergy between gas, coal and waste energies with the highest global efficiency. (Author)

Regulation of Gene Expression in Shewanella oneidensis MR-1 during Electron Acceptor Limitation and Bacterial Nanowire Formation

Science.gov (United States)

Barchinger, Sarah E.; Pirbadian, Sahand; Baker, Carol S.; Leung, Kar Man; Burroughs, Nigel J.; El-Naggar, Mohamed Y.

2016-01-01

ABSTRACT In limiting oxygen as an electron acceptor, the dissimilatory metal-reducing bacterium Shewanella oneidensis MR-1 rapidly forms nanowires, extensions of its outer membrane containing the cytochromes MtrC and OmcA needed for extracellular electron transfer. RNA sequencing (RNA-Seq) analysis was employed to determine differential gene expression over time from triplicate chemostat cultures that were limited for oxygen. We identified 465 genes with decreased expression and 677 genes with increased expression. The coordinated increased expression of heme biosynthesis, cytochrome maturation, and transport pathways indicates that S. oneidensis MR-1 increases cytochrome production, including the transcription of genes encoding MtrA, MtrC, and OmcA, and transports these decaheme cytochromes across the cytoplasmic membrane during electron acceptor limitation and nanowire formation. In contrast, the expression of the mtrA and mtrC homologs mtrF and mtrD either remains unaffected or decreases under these conditions. The ompW gene, encoding a small outer membrane porin, has 40-fold higher expression during oxygen limitation, and it is proposed that OmpW plays a role in cation transport to maintain electrical neutrality during electron transfer. The genes encoding the anaerobic respiration regulator cyclic AMP receptor protein (CRP) and the extracytoplasmic function sigma factor RpoE are among the transcription factor genes with increased expression. RpoE might function by signaling the initial response to oxygen limitation. Our results show that RpoE activates transcription from promoters upstream of mtrC and omcA. The transcriptome and mutant analyses of S. oneidensis MR-1 nanowire production are consistent with independent regulatory mechanisms for extending the outer membrane into tubular structures and for ensuring the electron transfer function of the nanowires. IMPORTANCE Shewanella oneidensis MR-1 has the capacity to transfer electrons to its external surface

Experimental verification of the fission chamber gamma signal suppression by the Campbelling mode

Energy Technology Data Exchange (ETDEWEB)

Vermeeren, L.; Weber, M. [SCK-CEN, Boeretang 200, B-2400 Mol (Belgium); Oriol, L.; Breaud, S.; Filliatre, P.; Geslot, B.; Jammes, C. [CEA, Centre de Cadarache, F-13109 Saint-Paul-lez-Durance (France); Normand, S.; Lescop, B. [CEA, Centre de Saclay, F-91191 Gif sur Yvette Cedex (France)

2009-07-01

For the on-line monitoring of high fast neutron fluxes in the presence of a strong thermal neutron component, SCK-CEN and CEA are jointly developing a Fast Neutron Detector System, based on {sup 242}Pu fission chambers as sensors and including dedicated electronics and data processing systems. Irradiation tests in the BR2 reactor of {sup 242}Pu fission chambers operating in current mode showed that in typical MTR (Materials Test Reactors) conditions the fission chamber currents are dominated by the gamma contribution. In order to reduce the gamma contribution to the signal, it was proposed to use the fission chambers in Campbelling mode. An irradiation experiment in the BR2 reactor with a {sup 242}Pu and a {sup 235}U fission chamber, both equipped with a suitable cable for measurements in Campbelling mode, proved the effectiveness of the suppression of the gamma-induced signal component by the Campbelling mode: gamma contribution reduction factors of 26 for the {sup 235}U fission chamber and more than 80 for the {sup 242}Pu fission chamber were obtained. The experimental data also prove that photofission contributions are negligibly small. Consequently, in typical MTR conditions the gamma contribution to the fission chamber Campbelling signal can be neglected. (authors)

The Effect of Carbonaceous Reductant Selection on Chromite Pre-reduction

Science.gov (United States)

Kleynhans, E. L. J.; Beukes, J. P.; Van Zyl, P. G.; Bunt, J. R.; Nkosi, N. S. B.; Venter, M.

2017-04-01

Ferrochrome (FeCr) production is an energy-intensive process. Currently, the pelletized chromite pre-reduction process, also referred to as solid-state reduction of chromite, is most likely the FeCr production process with the lowest specific electricity consumption, i.e., MWh/t FeCr produced. In this study, the effects of carbonaceous reductant selection on chromite pre-reduction and cured pellet strength were investigated. Multiple linear regression analysis was employed to evaluate the effect of reductant characteristics on the aforementioned two parameters. This yielded mathematical solutions that can be used by FeCr producers to select reductants more optimally in future. Additionally, the results indicated that hydrogen (H)- (24 pct) and volatile content (45.8 pct) were the most significant contributors for predicting variance in pre-reduction and compressive strength, respectively. The role of H within this context is postulated to be linked to the ability of a reductant to release H that can induce reduction. Therefore, contrary to the current operational selection criteria, the authors believe that thermally untreated reductants ( e.g., anthracite, as opposed to coke or char), with volatile contents close to the currently applied specification (to ensure pellet strength), would be optimal, since it would maximize H content that would enhance pre-reduction.

Scenarios for the hierarchical evaluation of the global sustainability of electric generator plants

International Nuclear Information System (INIS)

Roldan A, M.C.; Martinez F, M.

2007-01-01

The AHP multi criteria method was applied (Analytic Hierarchy Process-Analytic process of Hierarchization) to evaluate the sustainability in the whole life cycle of the electricity generation technologies (hydroelectric, carboelectric, thermoelectric natural fuel oil, natural gas thermoelectric, geothermal, nucleo electric, wind electric, photo thermic and photovoltaic) with the purpose of offering an useful method in the taking of decisions to impel the sustainable development. Eight scenarios are analyzed. The results in most of the scenarios reflect the benefit of the renewable energy: the hydroelectric energy, photo thermic and wind driven its are those more sustainable. To reach the sustainable development in Mexico, the energy politicians should be more near to the use of the renewable energy. (Author)

Scenarios for the hierarchical evaluation of the global sustainability of electric generator plants; Escenarios para la evaluacion jerarquica de la sustentabilidad global de plantas generadoras de electricidad

Energy Technology Data Exchange (ETDEWEB)

Roldan A, M.C.; Martinez F, M. [Centro de Investigacion en Energia, UNAM, A.P. 34, 62580 Temixco, Morelos (Mexico)]. e-mail: mcra@cie.unam.mx

2007-07-01

The AHP multi criteria method was applied (Analytic Hierarchy Process-Analytic process of Hierarchization) to evaluate the sustainability in the whole life cycle of the electricity generation technologies (hydroelectric, carboelectric, thermoelectric natural fuel oil, natural gas thermoelectric, geothermal, nucleo electric, wind electric, photo thermic and photovoltaic) with the purpose of offering an useful method in the taking of decisions to impel the sustainable development. Eight scenarios are analyzed. The results in most of the scenarios reflect the benefit of the renewable energy: the hydroelectric energy, photo thermic and wind driven its are those more sustainable. To reach the sustainable development in Mexico, the energy politicians should be more near to the use of the renewable energy. (Author)

Non-arteritic anterior ischaemic optic neuropathy: evaluation of the brain and optic pathway by conventional MRI and magnetisation transfer imaging

Energy Technology Data Exchange (ETDEWEB)

Argyropoulou, Maria I.; Zikou, Anastasia K.; Tzovara, Ioanna; Margariti, Persefoni [University of Ioannina, Department of Radiology, Medical School, Ioannina (Greece); Nikas, Alexios; Asproudis, Ioannis [University of Ioannina, Ophthalmologic Clinic, Medical School, Ioannina (Greece); Blekas, Kostandinos; Galatsanos, Nikolaos [University of Ioannina, Department of Informatics, Ioannina (Greece)

2007-07-15

The purpose of the study was to examine the brain and the visual pathway of patients with non-arteritic anterior ischaemic optic neuropathy (NAION) by using conventional MRI (cMRI) and volumetric magnetisation transfer imaging (MTI). Thirty NAION patients, aged 67.5 {+-} 8.14 years, and 28 age- and gender-matched controls were studied. MTI was used to measure the magnetisation transfer ratio (MTR) of the chiasm and for MTR histograms of the brain. The presence of areas of white matter hyperintensity (WMH) was evaluated on fluid-attenuated inversion recovery (FLAIR) images. Area of the optic nerves (ONs) and volume of the chiasm were assessed, as were coronal short-tau inversion recovery (STIR) and MTI images, respectively. More areas of WMH were observed in patients (total 419; mean 14.4; SD 19) than in controls (total 127; mean 4.7; SD 5.7), P < 0.001. Area (in square millimetres) of the affected ONs, volume(in cubic millimetres) and MTR (in percent) of the chiasm (10.7 {+-} 4.6), (75.8 {+-} 20.2), (56.4 {+-} 6.5), respectively, were lower in patients than in controls (13.6 {+-} 4.3), (158.2 {+-} 75.3) (62.1 {+-} 6.2), respectively, P < 0.05. Mean MTR of brain histograms was lower in patients (53.0 {+-} 8.0) than in controls (58.0 {+-} 5.6), P < 0.05. NAION is characterised by decreased ON and chiasmatic size. The low MTR of the chiasm and brain associated with increased areas of WMH may be suggestive of demyelination and axonal damage due to generalised cerebral vascular disease. (orig.)

Mechanical pain sensitivity of deep tissues in children - possible development of myofascial trigger points in children

Directory of Open Access Journals (Sweden)

Han Ting-I

2012-02-01

Full Text Available Abstract Background It is still unclear when latent myofascial trigger points (MTrPs develop during early life. This study is designed to investigate the mechanical pain sensitivity of deep tissues in children in order to see the possible timing of the development of latent MTrPs and attachment trigger points (A-TrPs in school children. Methods Five hundreds and five healthy school children (age 4- 11 years were investigated. A pressure algometer was used to measure the pressure pain threshold (PPT at three different sites in the brachioradialis muscle: the lateral epicondyle at elbow (site A, assumed to be the A-TrP site, the mid-point of the muscle belly (site B, assumed to be the MTrP site, and the muscle-tendon junction as a control site (site C. Results The results showed that, for all children in this study, the mean PPT values was significantly lower (p p Conclusions It is concluded that a child had increased sensitivity at the tendon attachment site and the muscle belly (endplate zone after age of 4 years. Therefore, it is likely that a child may develop an A-Trp and a latent MTrP at the brachioradialis muscle after the age of 4 years. The changes in sensitivity, or the development for these trigger points, may not be related to the activity level of children aged 7-11 years. Further investigation is still required to indentify the exact timing of the initial occurrence of a-Trps and latent MTrPs.

Magnetization transfer ratio in the brain of preterm subjects: age-related changes during the first 2 years of life

Energy Technology Data Exchange (ETDEWEB)

Xydis, Vassilios; Astrakas, Loukas; Zikou, Anastasia; Argyropoulou, Maria I. [University of Ioannina, Department of Radiology, Medical School, Ioannina (Greece); Pantou, Kostandina; Andronikou, Styliani [Medical School University of Ioannina, Neonatology Clinic, Child Health Department, Ioannina (Greece)

2006-01-01

To study the progress of myelination in preterm-born subjects by measuring the MT ratio (MTR) from birth, up to 24 months of corrected age.One hundred twenty-five preterm subjects (64 males and 61 females of gestational age 33{+-}2.4 weeks with chronologic and corrected age of 9.3{+-}5.1 and 7.7{+-}5.1 months, respectively) with normal brain MR using classic sequences were further evaluated for MTR by using a three-dimensional gradient-echo sequence (TR=32/TE=8/flip angle=6 4 mm/2 mm overlapping sections) with and without magnetization transfer prepulse. The magnetization transfer ratio was calculated as: MTR=(SIo-SIm)/SIo x 100%, where SIm refers to signal intensity from an image acquired with a MT prepulse and SIo the signal intensity from the image acquired without a MT prepulse. MTR increased asymptotically in the genu (R{sup 2}=0.85) and splenium (R{sup 2}=0.85) of the corpus callosum, the white matter of the frontal lobe (R{sup 2}=0.91) and occipital lobe (R{sup 2}=0.82), thalamus (R{sup 2}=0.86), caudate nucleus (R{sup 2}=0.67) and putamen (R{sup 2}=0.71), reaching the 95% of the final value at the corrected age 18.7, 17.7, 15.6, 12.9, 10.4, 9.2 and 6.4 months, respectively. This study shows age-related changes of the brain MTR and provides data that may be useful to assess disturbances in the progress of myelination. (orig.)

Quantitative magnetic resonance techniques in the evaluation of intracranial tuberculomas

International Nuclear Information System (INIS)

Vasudev, M.K.; Jayakumar, P.N.; Srikanth, S.G.; Nagarajan, K.; Mohanty, A.

2007-01-01

Purpose: To evaluate intracranial tuberculomas using quantitative magnetic resonance (MR) techniques such as T2 relaxometry, magnetization transfer (MT), and diffusion-weighted imaging (DWI). Material and Methods: Thirty-three patients with intracranial tuberculomas (histologically confirmed in 22) were evaluated using proton density/T2-weighted, T1-weighted (with and without MT), and echo-planar diffusion-weighted imaging sequences. T2 relaxation times, MT ratios (MTR), and apparent diffusion coefficient (ADC) values were calculated from the center of the lesion, the periphery, perilesional edema, and contralateral normal white matter. The mean and standard deviation values of each variable were calculated and correlated using Pearson's test (P = 0.05). Results: The measured mean values of T2 relaxation time, MTR, and ADC in the center of lesions were 155.5 ms, 14.1, and 1.27x10-3 mm 2 /s, respectively, compared to 117 ms, 23.72, and 0.74x10-3 mm 2 /s in normal white matter, and a T2 relaxation time of 187.45 ms in normal gray matter. Significant inverse correlations were noted between T2 relaxation values and MTR (P<0.001) and between MTR and ADC (P = 0.046). Significant positive correlation was seen between T2 relaxation and ADC values (P = 0.03). Conclusion: Intracranial tuberculomas are characterized by relatively short T2 relaxation times (compared to normal gray matter), decreased MTR, and mostly no restriction of diffusion. A combination of these quantitative parameters could be of help in the noninvasive diagnosis of tuberculomas

Impact of Fluoroquinolone Resistance Mutations on Gonococcal Fitness and In Vivo Selection for Compensatory Mutations

Science.gov (United States)

Kunz, Anjali N.; Begum, Afrin A.; Wu, Hong; D'Ambrozio, Jonathan A.; Robinson, James M.; Shafer, William M.; Bash, Margaret C.; Jerse, Ann E.

2012-01-01

Background. Quinolone-resistant Neisseria gonorrhoeae (QRNG) arise from mutations in gyrA (intermediate resistance) or gyrA and parC (resistance). Here we tested the consequence of commonly isolated gyrA91/95 and parC86 mutations on gonococcal fitness. Methods. Mutant gyrA91/95 and parC86 alleles were introduced into wild-type gonococci or an isogenic mutant that is resistant to macrolides due to an mtrR−79 mutation. Wild-type and mutant bacteria were compared for growth in vitro and in competitive murine infection. Results. In vitro growth was reduced with increasing numbers of mutations. Interestingly, the gyrA91/95 mutation conferred an in vivo fitness benefit to wild-type and mtrR−79 mutant gonococci. The gyrA91/95, parC86 mutant, in contrast, showed a slight fitness defect in vivo, and the gyrA91/95, parC86, mtrR−79 mutant was markedly less fit relative to the parent strains. A ciprofloxacin-resistant (CipR) mutant was selected during infection with the gyrA91/95, parC86, mtrR−79 mutant in which the mtrR−79 mutation was repaired and the gyrA91 mutation was altered. This in vivo–selected mutant grew as well as the wild-type strain in vitro. Conclusions. gyrA91/95 mutations may contribute to the spread of QRNG. Further acquisition of a parC86 mutation abrogates this fitness advantage; however, compensatory mutations can occur that restore in vivo fitness and maintain CipR. PMID:22492860

Back-end of the research reactor fuel cycle

International Nuclear Information System (INIS)

Gruber, Gehard J.

1996-01-01

This paper outlines the status of topics and issues related to: (1) Research Reactor Spent Nuclear Fuel Return to the U.S., including policy, shipments and ports of entry, management sites, fees, storage technologies, contracts, actual shipment, and legal process, (2) UKAEA: MTR Spent Nuclear Fuel Reprocessing, (3) COGEMA: MTR Spent Nuclear Fuel Reprocessing, and (4) Intermediate Storage + Direct Disposal for Research Reactors. (author)

Integrated infrastructure initiatives for material testing reactor innovations

International Nuclear Information System (INIS)

Dekeyser, Jean; Vermeeren, Ludo; Iracane, Daniel

2011-01-01

Highlights: → The EU FP7 MTR+I3 project has initiated a durable cooperation between MTR operators. → Improvements in irradiation test device technology and instrumentation were achieved. → Professional training efforts were streamlined and best practices were exchanged. → A framework has been set up to coordinate and optimize the use of MTRs in the EU. - Abstract: The key goal of the European FP6 project MTR+I3 was to build a durable cooperation between Material Testing Reactor (MTR) operators and relevant laboratories that can maintain European leadership with updated capabilities and competences regarding reactor performances and irradiation technology. The MTR+I3 consortium was composed of 18 partners with a high level of expertise in irradiation-related services for all types of nuclear plants. This project covered activities that foster integration of the MTR community involved in designing, fabricating and operating irradiation devices through information exchange, know-how cross-fertilization, exchanges of interdisciplinary personnel, structuring of key-technology suppliers and professional training. The network produced best practice guidelines for selected irradiation activities. This project allowed to launch or to improve technical studies in various domains dealing with irradiation test device technology, experimental loop designs and instrumentation. Major results are illustrated in this paper. These concern in particular: on-line fuel power determination, neutron screen optimization, simulation of transmutation process, power transient systems, water chemistry and stress corrosion cracking, fission gas measurement, irradiation behaviour of electronic modules, mechanical loading under irradiation, high temperature gas loop technology, heavy liquid metal loop development and safety test instrumentation. One of the major benefits of this project is that, starting from a situation of fragmented resources in a strongly competitive sector, it has

Developing the MAPLE materials test reactor concept

International Nuclear Information System (INIS)

Lee, A.G.; Lidstone, R.F.; Donnelly, J.V.

1992-05-01

MAPLE-MTR is a new multipurpose research facility being planned by AECL Research as a possible replacement for the 35-year-old NRU reactor. In developing the MAPLE-MTR concept, AECL is starting from the recent design and licensing experience with the MAPLE-X10 reactor. By starting from technology developed to support the MAPLE-X10 design and adapting it to produce a concept that satisfies the requirements of fuel channel materials testing and fuel irradiation programs, AECL expects to minimize the need for major advances in nuclear technology (e.g., fuel, heat transfer). Formulation of the MAPLE-MTR concept is at an early stage. This report describes the irradiation requirements of the research areas, how these needs are translated into design criteria for the project and elements of the preliminary design concept

Infinitary Combinatory Reduction Systems: Normalising Reduction Strategies

NARCIS (Netherlands)

Ketema, J.; Simonsen, Jakob Grue

2010-01-01

We study normalising reduction strategies for infinitary Combinatory Reduction Systems (iCRSs). We prove that all fair, outermost-fair, and needed-fair strategies are normalising for orthogonal, fully-extended iCRSs. These facts properly generalise a number of results on normalising strategies in

Reduction redux.

Science.gov (United States)

Shapiro, Lawrence

2018-04-01

Putnam's criticisms of the identity theory attack a straw man. Fodor's criticisms of reduction attack a straw man. Properly interpreted, Nagel offered a conception of reduction that captures everything a physicalist could want. I update Nagel, introducing the idea of overlap, and show why multiple realization poses no challenge to reduction so construed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Non-arteritic anterior ischaemic optic neuropathy: evaluation of the brain and optic pathway by conventional MRI and magnetisation transfer imaging

International Nuclear Information System (INIS)

Argyropoulou, Maria I.; Zikou, Anastasia K.; Tzovara, Ioanna; Margariti, Persefoni; Nikas, Alexios; Asproudis, Ioannis; Blekas, Kostandinos; Galatsanos, Nikolaos

2007-01-01

The purpose of the study was to examine the brain and the visual pathway of patients with non-arteritic anterior ischaemic optic neuropathy (NAION) by using conventional MRI (cMRI) and volumetric magnetisation transfer imaging (MTI). Thirty NAION patients, aged 67.5 ± 8.14 years, and 28 age- and gender-matched controls were studied. MTI was used to measure the magnetisation transfer ratio (MTR) of the chiasm and for MTR histograms of the brain. The presence of areas of white matter hyperintensity (WMH) was evaluated on fluid-attenuated inversion recovery (FLAIR) images. Area of the optic nerves (ONs) and volume of the chiasm were assessed, as were coronal short-tau inversion recovery (STIR) and MTI images, respectively. More areas of WMH were observed in patients (total 419; mean 14.4; SD 19) than in controls (total 127; mean 4.7; SD 5.7), P < 0.001. Area (in square millimetres) of the affected ONs, volume(in cubic millimetres) and MTR (in percent) of the chiasm (10.7 ± 4.6), (75.8 ± 20.2), (56.4 ± 6.5), respectively, were lower in patients than in controls (13.6 ± 4.3), (158.2 ± 75.3) (62.1 ± 6.2), respectively, P < 0.05. Mean MTR of brain histograms was lower in patients (53.0 ± 8.0) than in controls (58.0 ± 5.6), P < 0.05. NAION is characterised by decreased ON and chiasmatic size. The low MTR of the chiasm and brain associated with increased areas of WMH may be suggestive of demyelination and axonal damage due to generalised cerebral vascular disease. (orig.)

NVL2, a nucleolar AAA-ATPase, is associated with the nuclear exosome and is involved in pre-rRNA processing

Energy Technology Data Exchange (ETDEWEB)

Yoshikatsu, Yuki [Department of Life Systems, Institute of Technology and Science, The University of Tokushima Graduate School, Tokushima 770-8506 (Japan); Ishida, Yo-ichi; Sudo, Haruka [Department of Molecular and Cellular Biochemistry, Meiji Pharmaceutical University, Kiyose, Tokyo 204-8588 (Japan); Yuasa, Keizo; Tsuji, Akihiko [Department of Life Systems, Institute of Technology and Science, The University of Tokushima Graduate School, Tokushima 770-8506 (Japan); Nagahama, Masami, E-mail: nagahama@my-pharm.ac.jp [Department of Molecular and Cellular Biochemistry, Meiji Pharmaceutical University, Kiyose, Tokyo 204-8588 (Japan)

2015-08-28

Nuclear VCP-like 2 (NVL2) is a member of the chaperone-like AAA-ATPase family and is involved in the biosynthesis of 60S ribosomal subunits in mammalian cells. We previously showed the interaction of NVL2 with a DExD/H-box RNA helicase MTR4/DOB1, which is a known cofactor for an exoribonuclease complex, the exosome. This finding implicated NVL2 in RNA metabolic processes during ribosome biogenesis. In the present study, we found that a series of mutations within the ATPase domain of NVL2 causes a defect in pre-rRNA processing into mature 28S and 5.8S rRNAs. Co-immunoprecipitation analysis showed that NVL2 was associated with the nuclear exosome complex, which includes RRP6 as a nucleus-specific catalytic subunit. This interaction was prevented by depleting either MTR4 or RRP6, indicating their essential role in mediating this interaction with NVL2. Additionally, knockdown of MPP6, another cofactor for the nuclear exosome, also prevented the interaction by causing MTR4 to dissociate from the nuclear exosome. These results suggest that NVL2 is involved in pre-rRNA processing by associating with the nuclear exosome complex and that MPP6 is required for maintaining the integrity of this rRNA processing complex. - Highlights: • ATPase-deficient mutants of NVL2 have decreased pre-rRNA processing. • NVL2 associates with the nuclear exosome through interactions with MTR4 and RRP6. • MPP6 stabilizes MTR4-RRP6 interaction and allows NVL2 to interact with the complex.

Amide Proton Transfer (APT) MR imaging and Magnetization Transfer (MT) MR imaging of pediatric brain development

International Nuclear Information System (INIS)

Zhang, Hong; Kang, Huiying; Peng, Yun; Zhao, Xuna; Jiang, Shanshan; Zhang, Yi; Zhou, Jinyuan

2016-01-01

To quantify the brain maturation process during childhood using combined amide proton transfer (APT) and conventional magnetization transfer (MT) imaging at 3 Tesla. Eighty-two neurodevelopmentally normal children (44 males and 38 females; age range, 2-190 months) were imaged using an APT/MT imaging protocol with multiple saturation frequency offsets. The APT-weighted (APTW) and MT ratio (MTR) signals were quantitatively analyzed in multiple brain areas. Age-related changes in MTR and APTW were evaluated with a non-linear regression analysis. The APTW signals followed a decreasing exponential curve with age in all brain regions measured (R"2 = 0.7-0.8 for the corpus callosum, frontal and occipital white matter, and centrum semiovale). The most significant changes appeared within the first year. At maturation, larger decreases in APTW and lower APTW values were found in the white matter. On the contrary, the MTR signals followed an increasing exponential curve with age in the same brain regions measured, with the most significant changes appearing within the initial 2 years. There was an inverse correlation between the MTR and APTW signal intensities during brain maturation. Together with MT imaging, protein-based APT imaging can provide additional information in assessing brain myelination in the paediatric population. (orig.)

Whole brain magnetization transfer histogram analysis of pediatric acute lymphoblastic leukemia patients receiving intrathecal methotrexate therapy

Energy Technology Data Exchange (ETDEWEB)

Yamamoto, Akira [Department of Diagnostic Imaging and Nuclear Medicine, Graduate School of Medicine, Kyoto University, 54 Kawahara-cho, Shogoin, Sakyo-ku, Kyoto-shi Kyoto 606-8507 (Japan)]. E-mail: yakira@kuhp.kyoto-u.ac.jp; Miki, Yukio [Department of Diagnostic Imaging and Nuclear Medicine, Graduate School of Medicine, Kyoto University, 54 Kawahara-cho, Shogoin, Sakyo-ku, Kyoto-shi Kyoto 606-8507 (Japan)]. E-mail: mikiy@kuhp.kyoto-u.ac.jp; Adachi, Souichi [Department of Pediatrics, Graduate School of Medicine, Kyoto University, 54 Kawahara-cho, Shogoin, Sakyo-ku, Kyoto-shi Kyoto 606-8507 (Japan)]. E-mail: sadachi@kuhp.kyoto-u.ac.jp (and others)

2006-03-15

Background and purpose: The purpose of this prospective study was to evaluate the hypothesis that magnetization transfer ratio (MTR) histogram analysis of the whole brain could detect early and subtle brain changes nonapparent on conventional magnetic resonance imaging (MRI) in children with acute lymphoblastic leukemia (ALL) receiving methotrexate (MTX) therapy. Materials and methods: Subjects in this prospective study comprised 10 children with ALL (mean age, 6 years; range, 0-16 years). In addition to conventional MRI, magnetization transfer images were obtained before and after intrathecal and intravenous MTX therapy. MTR values were calculated and plotted as a histogram, and peak height and location were calculated. Differences in peak height and location between pre- and post-MTX therapy scans were statistically analyzed. Conventional MRI was evaluated for abnormal signal area in white matter. Results: MTR peak height was significantly lower on post-MTX therapy scans than on pre-MTX therapy scans (p = 0.002). No significant differences in peak location were identified between pre- and post-chemotherapy imaging. No abnormal signals were noted in white matter on either pre- or post-MTX therapy conventional MRI. Conclusions: This study demonstrates that MTR histogram analysis allows better detection of early and subtle brain changes in ALL patients who receive MTX therapy than conventional MRI.

Amide Proton Transfer (APT) MR imaging and Magnetization Transfer (MT) MR imaging of pediatric brain development

Energy Technology Data Exchange (ETDEWEB)

Zhang, Hong; Kang, Huiying; Peng, Yun [Beijing Children' s Hospital, Capital Medical University, Imaging Center, Department of Radiology, Beijing (China); Zhao, Xuna [Philips Healthcare, Beijing (China); Jiang, Shanshan; Zhang, Yi; Zhou, Jinyuan [Johns Hopkins University, Division of MR Research, Department of Radiology, Baltimore, MD (United States)

2016-10-15

To quantify the brain maturation process during childhood using combined amide proton transfer (APT) and conventional magnetization transfer (MT) imaging at 3 Tesla. Eighty-two neurodevelopmentally normal children (44 males and 38 females; age range, 2-190 months) were imaged using an APT/MT imaging protocol with multiple saturation frequency offsets. The APT-weighted (APTW) and MT ratio (MTR) signals were quantitatively analyzed in multiple brain areas. Age-related changes in MTR and APTW were evaluated with a non-linear regression analysis. The APTW signals followed a decreasing exponential curve with age in all brain regions measured (R{sup 2} = 0.7-0.8 for the corpus callosum, frontal and occipital white matter, and centrum semiovale). The most significant changes appeared within the first year. At maturation, larger decreases in APTW and lower APTW values were found in the white matter. On the contrary, the MTR signals followed an increasing exponential curve with age in the same brain regions measured, with the most significant changes appearing within the initial 2 years. There was an inverse correlation between the MTR and APTW signal intensities during brain maturation. Together with MT imaging, protein-based APT imaging can provide additional information in assessing brain myelination in the paediatric population. (orig.)

Do Individuals Perceive Income Tax Rates Correctly?

Science.gov (United States)

Gideon, Michael

2017-01-01

This article uses data from survey questions fielded on the 2011 wave of the Cognitive Economics Study to uncover systematic errors in perceptions of income tax rates. First, when asked about the marginal tax rates (MTRs) for households in the top tax bracket, respondents underestimate the top MTR on wages and salary income, overestimate the MTR on dividend income, and therefore significantly underestimate the currently tax-advantaged status of dividend income. Second, when analyzing the relationship between respondents' self-reported average tax rates (ATRs) and MTRs, many people do not understand the progressive nature of the federal income tax system. Third, when comparing self-reported tax rates with those computed from self-reported income, respondents systematically overestimate their ATR while reported MTR are accurate at the mean, the responses are consistent with underestimation of tax schedule progressivity.

A novel and automatic mammographic texture resemblance marker is an independent risk factor for breast cancer

DEFF Research Database (Denmark)

Nielsen, Mads; Karemore, Gopal; Loog, Marco

2011-01-01

Objective: We investigated whether breast cancer is predicted by a breast cancer risk mammographic texture resemblance (MTR) marker. Methods: A previously published case-control study included 495 women of which 245 were diagnosed with breast cancer. In baseline mammograms, 2-4 years prior...... to diagnosis, the following mammographic parameters were analysed for relation to breast cancer risk: (C) categorical parenchymal pattern scores; (R) radiologist's percentage density, (P) computer-based percentage density; (H) computer-based breast cancer risk MTR marker; (E) computer-based hormone replacement...... treatment MTR marker; and (A) an aggregate of P and H. Results: Density scores, C, R, and P correlated (tau=0.3-0.6); no other pair of scores showed large (tau>0.2) correlation. For the parameters, the odds ratios of future incidence of breast cancer comparing highest to lowest categories (146 and 106...

Contribution of data processing to technical management of PWR power plants

International Nuclear Information System (INIS)

Damestoy, J.P.

1982-01-01

In this article are reviewed the equipment used for data processing by local computer and main applications in documentation management, maintenance, daily dosimetry, monitoring, neutronic and thermics computation, material, effluents etc.. [fr

Study of the variation of the nuclear transcriptional map during de initial development of Drosophyla melanogaster embryos

International Nuclear Information System (INIS)

Alonso, C.E.V.

1987-01-01

The variation of nuclear transcriptional map during the initial development of Drosophyla melanogaster embryos were studied. Thermic treatment, chromatographic techniques and liquid scintilation in embryos inoculated with radioactive uridine were used. (L.J.C.)

Science and technology of the rare earth elements

International Nuclear Information System (INIS)

Azzouz, Abdelkrim; Chegrouche, Salah; Telmoune, Sid-Ali; Layachi, Lazhar

1992-07-01

The present work studies the chemical physics properties, the different methods of analysis (neutron activation, emission spectrometry, chromatography), and the techniques of separation of rare earth (electrodeposition, thermic decomposition, salts distillation and ions exchange)

Magnetization transfer on T2-weighted image : magnetization Transfer ratios in normal brain and cerebral lesions

Energy Technology Data Exchange (ETDEWEB)

Lim, Myung Kwan; Roh, Hong Gee; Suh, Chang Hae; Cho, Young Kook; Kim, Hyung Jin; Kim, Jin Hee; Kim, Sung Tae; Choi, Sung Kyu [Inha Univ. College of Medicine, Incheon (Korea, Republic of)

1998-07-01

To evaluate the magnetization transfer ratio(MTR) of various normal structures and pathologic lesions, as seen on magnetization transfer T2-weighted images (MT+T2WI). Materials and Methods : In ten normal volunteers, T2-weighted images without MT (MT-T2WI) and with MT(MT+T2WI) were obtained. Off-set pulses used in MT+T2WI were 400, 600, 1000, 1500, and 2000Hz. In 60 clinical cases infarction(n=10), brain tumors(n=5), traumatic hematomas(n=5), other hematomas(n=3) vascular malformation(n=2) white matter disease(n=2) normal(n=31) and others(n=2), both MT-T2WI and MT+T2WI images were obtained using an off-set pulse of 600 Hz. In all volunteers and patients, MTR in various normal brain parenchyma and abnormal areas was measured. Results : The MTRs of white and gray matter were 48% and 45% respectively at 400 Hz, 26% and 22% at 600Hz, 12% and 11% of 1000Hz, 10% and 9% 1500HZ, and 9% and 8% at 2000Hz of RF. The MTR of CSF was 43% at 400 Hz of off-resonance RF, while the contrast resolution of T2WI was poor. An off-resonance of 600Hz appeared to be the optimal frequency. In diseased areas,MTRs varied but were usually similar to or lower than those of brain parenchyma. Conclusion : The optimal off-resonance RF on MT+T2WI appears to be 600 Hz for relatively high MTR of brain parenchyma and low MTR of CSF,in which MTRs of white and gray matter were 26% and 22%, respectively, of 600Hz off-set pulse. The MTRs of cerebral lesions varied and further studies of various cerebral lesions are needed.

T2 relaxation time analysis in patients with multiple sclerosis: correlation with magnetization transfer ratio

International Nuclear Information System (INIS)

Papanikolaou, Nickolas; Papadaki, Eufrosini; Karampekios, Spyros; Maris, Thomas; Prassopoulos, Panos; Gourtsoyiannis, Nicholas; Spilioti, Martha

2004-01-01

The aim of the current study was to perform T2 relaxation time measurements in multiple sclerosis (MS) patients and correlate them with magnetization transfer ratio (MTR) measurements, in order to investigate in more detail the various histopathological changes that occur in lesions and normal-appearing white matter (NAWM). A total number of 291 measurements of MTR and T2 relaxation times were performed in 13 MS patients and 10 age-matched healthy volunteers. Measurements concerned MS plaques (105), NAWM (80), and ''dirty'' white matter (DWM; 30), evenly divided between the MS patients, and normal white matter (NWM; 76) in the healthy volunteers. Biexponential T2 relaxation-time analysis was performed, and also possible linearity between MTR and mean T2 relaxation times was evaluated using linear regression analysis in all subgroups. Biexponential relaxation was more pronounced in ''black-hole'' lesions (16.6%) and homogeneous enhancing plaques (10%), whereas DWM, NAWM, and mildly hypointense lesions presented biexponential behavior with a lower frequency(6.6, 5, and 3.1%, respectively). Non-enhancing isointense lesions and normal white matter did not reveal any biexponentional behavior. Linear regression analysis between monoexponential T2 relaxation time and MTR measurements demonstrated excellent correlation for DWM(r=-0.78, p<0.0001), very good correlation for black-hole lesions(r=-0.71, p=0.002), good correlation for isointense lesions(r=-0.60, p=0.005), moderate correlation for mildly hypointense lesions(r=-0.34, p=0.007), and non-significant correlation for homogeneous enhancing plaques, NAWM, and NWM. Biexponential T2 relaxation-time behavior is seen in only very few lesions (mainly on plaques with high degree of demyelination and axonal loss). A strong correlation between MTR and monoexponential T2 values was found in regions where either inflammation or demyelination predominates; however, when both pathological conditions coexist, this linear

Amide Proton Transfer Magnetic Resonance Imaging of Alzheimer′s Disease at 3.0 Tesla: A Preliminary Study

Directory of Open Access Journals (Sweden)

Rui Wang

2015-01-01

Full Text Available Background: Amide proton transfer (APT imaging has recently emerged as an important contrast mechanism for magnetic resonance imaging (MRI in the field of molecular and cellular imaging. The aim of this study was to evaluate the feasibility of APT imaging to detect cerebral abnormality in patients with Alzheimer′s disease (AD at 3.0 Tesla. Methods: Twenty AD patients (9 men and 11 women; age range, 67-83 years and 20 age-matched normal controls (11 men and 9 women; age range, 63-82 years underwent APT and traditional MRI examination on a 3.0 Tesla MRI system. The magnetic resonance ratio asymmetry (MTR asym values at 3.5 ppm of bilateral hippocampi (Hc, temporal white matter regions, occipital white matter regions, and cerebral peduncles were measured on oblique axial APT images. MTR asym (3.5 ppm values of the cerebral structures between AD patients and control subjects were compared with independent samples t-test. Controlling for age, partial correlation analysis was used to investigate the associations between mini-mental state examination (MMSE and the various MRI measures among AD patients. Results: Compared with normal controls, MTR asym (3.5 ppm values of bilateral Hc were significantly increased in AD patients (right 1.24% ± 0.21% vs. 0.83% ± 0.19%, left 1.18% ± 0.18% vs. 0.80%± 0.17%, t = 3.039, 3.328, P = 0.004, 0.002, respectively. MTR asym (3.5 ppm values of bilateral Hc were significantly negatively correlated with MMSE (right r = −0.559, P = 0.013; left r = −0.461, P = 0.047. Conclusions: Increased MTR asym (3.5 ppm values of bilateral Hc in AD patients and its strong correlations with MMSE suggest that APT imaging could potentially provide imaging biomarkers for the noninvasive molecular diagnosis of AD.

Simultaneous pH-sensitive and oxygen-sensitive MRI of human gliomas at 3 T using multi-echo amine proton chemical exchange saturation transfer spin-and-gradient echo echo-planar imaging (CEST-SAGE-EPI).

Science.gov (United States)

Harris, Robert J; Yao, Jingwen; Chakhoyan, Ararat; Raymond, Catalina; Leu, Kevin; Liau, Linda M; Nghiemphu, Phioanh L; Lai, Albert; Salamon, Noriko; Pope, Whitney B; Cloughesy, Timothy F; Ellingson, Benjamin M

2018-04-06

To introduce a new pH-sensitive and oxygen-sensitive MRI technique using amine proton CEST echo spin-and-gradient echo (SAGE) EPI (CEST-SAGE-EPI). pH-weighting was obtained using CEST estimations of magnetization transfer ratio asymmetry (MTR asym ) at 3 ppm, and oxygen-weighting was obtained using R2' measurements. Glutamine concentration, pH, and relaxation rates were varied in phantoms to validate simulations and estimate relaxation rates. The values of MTR asym and R2' in normal-appearing white matter, T 2 hyperintensity, contrast enhancement, and macroscopic necrosis were measured in 47 gliomas. Simulation and phantom results confirmed an increase in MTR asym with decreasing pH. The CEST-SAGE-EPI estimates of R 2 , R2*, and R2' varied linearly with gadolinium diethylenetriamine penta-acetic acid concentration (R 2  = 6.2 mM -1 ·sec -1 and R2* = 6.9 mM -1 ·sec -1 ). The CEST-SAGE-EPI and Carr-Purcell-Meiboom-Gill estimates of R 2 (R 2  = 0.9943) and multi-echo gradient-echo estimates of R2* (R 2  = 0.9727) were highly correlated. T 2 lesions had lower R2' and higher MTR asym compared with normal-appearing white matter, suggesting lower hypoxia and high acidity, whereas contrast-enhancement tumor regions had elevated R2' and MTR asym , indicating high hypoxia and acidity. The CEST-SAGE-EPI technique provides simultaneous pH-sensitive and oxygen-sensitive image contrasts for evaluation of the brain tumor microenvironment. Advantages include fast whole-brain acquisition, in-line B 0 correction, and simultaneous estimation of CEST effects, R 2 , R2*, and R2' at 3 T. © 2018 International Society for Magnetic Resonance in Medicine.

A multimodal MRI approach to identify and characterize microstructural brain changes in neuropsychiatric systemic lupus erythematosus.

Science.gov (United States)

Ercan, Ece; Ingo, Carson; Tritanon, Oranan; Magro-Checa, Cesar; Smith, Alex; Smith, Seth; Huizinga, Tom; van Buchem, Mark A; Ronen, Itamar

2015-01-01

Systemic lupus erythematosus (SLE) is an autoimmune disease with multi-organ involvement and results in neurological and psychiatric (NP) symptoms in up to 40% of the patients. To date, the diagnosis of neuropsychiatric systemic lupus erythematosus (NPSLE) poses a challenge due to the lack of neuroradiological gold standards. In this study, we aimed to better localize and characterize normal appearing white matter (NAWM) changes in NPSLE by combining data from two quantitative MRI techniques, diffusion tensor imaging (DTI) and magnetization transfer imaging (MTI). 9 active NPSLE patients (37 ± 13 years, all females), 9 SLE patients without NP symptoms (44 ± 11 years, all females), and 14 healthy controls (HC) (40 ± 9 years, all females) were included in the study. MTI, DTI and fluid attenuated inversion recovery (FLAIR) images were collected from all subjects on a 3 T MRI scanner. Magnetization transfer ratio (MTR), mean diffusivity (MD), fractional anisotropy (FA), radial diffusivity (RD), axial diffusivity (AD) maps and white matter lesion maps based on the FLAIR images were created for each subject. MTR and DTI data were then co-analyzed using tract-based spatial statistics and a cumulative lesion map to exclude lesions. Significantly lower MTR and FA and significantly higher AD, RD and MD were found in NPSLE compared to HC in NAWM regions. The differences in DTI measures and in MTR, however, were only moderately co-localized. Additionally, significant differences in DTI measures, but not in MTR, were found between NPSLE and SLE patients, suggesting that the underlying microstructural changes detected by MD are linked to the onset of NPSLE. The co-analysis of the anatomical distribution of MTI and DTI measures can potentially improve the diagnosis of NPSLE and contribute to the understanding of the underlying microstructural damage.

Effects of soluble flavin on heterogeneous electron transfer between surface-exposed bacterial cytochromes and iron oxides

Energy Technology Data Exchange (ETDEWEB)

Wang, Zheming; Shi, Zhi; Shi, Liang; White, Gaye F.; Richardson, David J.; Clarke, Thomas A.; Fredrickson, Jim K.; Zachara, John M.

2015-08-25

Dissimilatory iron-reducing bacteria can utilize insoluble Fe(Mn)-oxides as a terminal electron acceptor under anaerobic conditions. For Shewanella species specifically, some evidence suggests that iron reduction is associated with the secretion of flavin mononucleotide (FMN) and riboflavin that are proposed to mediate electron transfer (Marsili et al., 2008). In this work, we used methyl viologen (MV•+)-encapsulated, porin-cytochrome complex (MtrCAB) embedded liposomes (MELs) as a synthetic model of the Shewanella outer membrane to investigate the proposed mediating behavior of secreted flavins. The reduction kinetics of goethite, hematite and lepidocrocite (200 µM) by MELs ([MV•+] ~ 42 µM and MtrABC ≤ 1 nM) were determined in the presence FMN at pH 7.0 in N2 atmosphere by monitoring the concentrations of MV•+ and FMN through their characteristic UV-visible absorption spectra. Experiments were performed where i) FMN and Fe(III)-oxide were mixed and then reacted with the reduced MELs and ii) FMN was reacted with the reduced MELs followed by addition of Fe(III)-oxide. The redox reactions proceeded in two steps: a fast step that was completed in a few seconds, and a slower one lasting over 400 seconds. For all three Fe(III)-oxides, the initial reaction rate in the presence of a low concentration of FMN (≤ 1 µM) was at least a factor of five faster than those with MELs alone, and orders of magnitude faster than those by FMNH2, suggesting that FMN may serve as a co-factor that enhances electron transfer from outer-membrane c-cytochromes to Fe(III)-oxides. The rate and extent of the initial reaction followed the order of lepidocrocite > hematite > goethite, the same as their reduction potentials, implying thermodynamic control on reaction rate. However, at higher FMN concentrations (> 1 µM), the reaction rates for both steps decreased and varied inversely with FMN concentration, indicating that FMN inhibited the MEL to Fe(III)-oxide electron transfer

Microbial reductive dehalogenation.

Science.gov (United States)

Mohn, W W; Tiedje, J M

1992-01-01

A wide variety of compounds can be biodegraded via reductive removal of halogen substituents. This process can degrade toxic pollutants, some of which are not known to be biodegraded by any other means. Reductive dehalogenation of aromatic compounds has been found primarily in undefined, syntrophic anaerobic communities. We discuss ecological and physiological principles which appear to be important in these communities and evaluate how widely applicable these principles are. Anaerobic communities that catalyze reductive dehalogenation appear to differ in many respects. A large number of pure cultures which catalyze reductive dehalogenation of aliphatic compounds are known, in contrast to only a few organisms which catalyze reductive dehalogenation of aromatic compounds. Desulfomonile tiedjei DCB-1 is an anaerobe which dehalogenates aromatic compounds and is physiologically and morphologically unusual in a number of respects, including the ability to exploit reductive dehalogenation for energy metabolism. When possible, we use D. tiedjei as a model to understand dehalogenating organisms in the above-mentioned undefined systems. Aerobes use reductive dehalogenation for substrates which are resistant to known mechanisms of oxidative attack. Reductive dehalogenation, especially of aliphatic compounds, has recently been found in cell-free systems. These systems give us an insight into how and why microorganisms catalyze this activity. In some cases transition metal complexes serve as catalysts, whereas in other cases, particularly with aromatic substrates, the catalysts appear to be enzymes. Images PMID:1406492

Determination of the minimum number of fuel elements of the RP-10 research reactor

International Nuclear Information System (INIS)

Languasco, J.

1989-01-01

The peruvian research reactor RP-10 is composed of a compound nucleus of boxes containing fuel plates which are cooled with light water in order to remove heat produced by fission of uranium atoms. However from a certainty viewpoint, it exists certain restrictions to design the cooling system. The most admissible caloric flux of 90.3 watts/cm 2 is deflux of 90.3 watts/cm 2 is determined on the basis of these thermic restrictions when cooling speed is 409 cm/sec permitting at least 24 fuel elements(boxes) within the nucleus. On the basis of restrictions of load loss in the nucleus, it would be permitted at least 18 fuel elements, but this quantity breaks thermic restrictions for this reason, 24 boxes in the nucleus will be the minimum number of elements

Enema reduction of intussusception: the success rate of hydrostatic and pneumatic reduction.

Science.gov (United States)

Khorana, Jiraporn; Singhavejsakul, Jesda; Ukarapol, Nuthapong; Laohapensang, Mongkol; Wakhanrittee, Junsujee; Patumanond, Jayanton

2015-01-01

Intussusception is a common surgical emergency in infants and children. The incidence of intussusception is from one to four per 2,000 infants and children. If there is no peritonitis, perforation sign on abdominal radiographic studies, and nonresponsive shock, nonoperative reduction by pneumatic or hydrostatic enema can be performed. The purpose of this study was to compare the success rates of both the methods. Two institutional retrospective cohort studies were performed. All intussusception patients (ICD-10 code K56.1) who had visited Chiang Mai University Hospital and Siriraj Hospital from January 2006 to December 2012 were included in the study. The data were obtained by chart reviews and electronic databases, which included demographic data, symptoms, signs, and investigations. The patients were grouped according to the method of reduction followed into pneumatic reduction and hydrostatic reduction groups with the outcome being the success of the reduction technique. One hundred and seventy episodes of intussusception occurring in the patients of Chiang Mai University Hospital and Siriraj Hospital were included in this study. The success rate of pneumatic reduction was 61% and that of hydrostatic reduction was 44% (P=0.036). Multivariable analysis and adjusting of the factors by propensity scores were performed; the success rate of pneumatic reduction was 1.48 times more than that of hydrostatic reduction (P=0.036, 95% confidence interval [CI] =1.03-2.13). Both pneumatic and hydrostatic reduction can be performed safely according to the experience of the radiologist or pediatric surgeon and hospital setting. This study showed that pneumatic reduction had a higher success rate than hydrostatic reduction.

Principal Components as a Data Reduction and Noise Reduction Technique

Science.gov (United States)

Imhoff, M. L.; Campbell, W. J.

1982-01-01

The potential of principal components as a pipeline data reduction technique for thematic mapper data was assessed and principal components analysis and its transformation as a noise reduction technique was examined. Two primary factors were considered: (1) how might data reduction and noise reduction using the principal components transformation affect the extraction of accurate spectral classifications; and (2) what are the real savings in terms of computer processing and storage costs of using reduced data over the full 7-band TM complement. An area in central Pennsylvania was chosen for a study area. The image data for the project were collected using the Earth Resources Laboratory's thematic mapper simulator (TMS) instrument.

Changes in free and bound water in the hippocampus of patients with Alzheimer's disease

International Nuclear Information System (INIS)

Asano, Tetsuichi; Hanyu, Haruo

2000-01-01

We measured the T2 relaxation time using dual spin echo MRI, and also the magnetization transfer ratio (MTR) using gradient echo MRI, in the hippocampus of Alzheimer's disease (AD) patients, and compared these factors to those of non-Alzheimer's dementia (non-AD) patients and of control subjects. The degree of medial temporal lobe atrophy in AD patients was similar to that of non-AD patients, although atrophy was more severe in AD and non-AD patients than in the control group. MTRs in the hippocampus were significantly lower in AD patients than in non-AD patients and in the control group. No significant differences in the T2 values of the three groups were found. The change of T2 x (1-MTR/100) in the hippocampus was significantly higher in AD patients than in non-AD patients and the control group and the change of T2 x MTR/100 was significantly lower in AD patients than in non-AD patients and the control group. Significant correlations between MMSE scores and MR parameters were found in AD patients, but not in non-AD patients. These results suggest that a decrease in the MTR in the hippocampus of AD, probably due to a decrease in bound water and an increase in free water, reflects underlying pathological changes which include a loss of neurons and gliosis. (author)

Myofascial trigger point-focused head and neck massage for recurrent tension-type headache: A randomized, placebo-controlled clinical trial

Science.gov (United States)

Moraska, Albert F.; Stenerson, Lea; Butryn, Nathan; Krutsch, Jason P.; Schmiege, Sarah J.; Mann, J. Douglas

2014-01-01

Objective Myofascial trigger points (MTrPs) are focal disruptions in skeletal muscle that can refer pain to the head and reproduce the pain patterns of tension-type headache (TTH). The present study applied massage focused on MTrPs of subjects with TTH in a placebo-controlled, clinical trial to assess efficacy on reducing headache pain. Methods Fifty-six subjects with TTH were randomized to receive 12 massage or placebo (detuned ultrasound) sessions over six weeks, or to wait-list. Trigger point release (TPR) massage focused on MTrPs in cervical musculature. Headache pain (frequency, intensity and duration) was recorded in a daily headache diary. Additional outcome measures included self-report of perceived clinical change in headache pain and pressure-pain threshold (PPT) at MTrPs in the upper trapezius and sub-occipital muscles. Results From diary recordings, group differences across time were detected in headache frequency (p=0.026), but not for intensity or duration. Post hoc analysis indicated headache frequency decreased from baseline for both massage (pheadache pain for massage than placebo or wait-list groups (p=0.002). PPT improved in all muscles tested for massage only (all p'streatment of TTH, and 2) TTH, like other chronic conditions, is responsive to placebo. Clinical trials on headache that do not include a placebo group are at risk for overestimating the specific contribution from the active intervention. PMID:25329141

Magnetization transfer ratio for the assessment of perianal fistula activity in Crohn's disease

Energy Technology Data Exchange (ETDEWEB)

Pinson, C.; Dolores, M.; Cruypeninck, Y.; Koning, E.; Dacher, J.N.; Savoye-Collet, C. [Rouen University Hospital-Charles Nicolle, Department of Radiology, Rouen cedex (France); Savoye, G. [Rouen University Hospital-Charles Nicolle, Department of Gastroenterology, Rouen cedex (France)

2017-01-15

Assessment of perianal fistulas is important to guide management of Crohn's disease (CD). Our objectives were to analyze the feasibility of magnetization transfer (MT) imaging to assess fistulas and to evaluate its contribution in assessing disease activity. During 15 months, all patients referred for perianal fistulas in CD underwent 3T-MRI including diffusion, T2/T1-weighted gadolinium-enhanced sequences and MT sequences (one with an off-resonance saturation pulse of 800 and one with 1200 Hz). We collected Van Assche score, fistula activity signs by analyzing T2, diffusion and contrast enhancement. We calculated MT ratio (MTR) with a ROI in the largest fistula. Twenty-nine patients (mean 34.9 years, range 17-53) were included. Van Assche score was 11.7, range 4-21. In 22 patients, the fistula presented with a bright T2 and diffusion signal with contrast enhancement, and was characterized as active. Mean MTR was respectively 47.2 (range 12-68) and 34.3 (range 11-57) at 800 and 1200 Hz. MTR at 800 Hz was significantly lower in non-active (34, range 12-55) than in active fistulas (51, range 24-68) (p < 0.02). MTR is feasible for the assessment of fistulas in CD and in the future could be used to help identify active and non-active fistulas. (orig.)

Reduction in language testing

DEFF Research Database (Denmark)

Dimova, Slobodanka; Jensen, Christian

2013-01-01

/video recorded speech samples and written reports produced by two experienced raters after testing. Our findings suggest that reduction or reduction-like pronunciation features are found in tested L2 speech, but whenever raters identify and comment on such reductions, they tend to assess reductions negatively......This study represents an initial exploration of raters' comments and actual realisations of form reductions in L2 test speech performances. Performances of three L2 speakers were selected as case studies and illustrations of how reductions are evaluated by the raters. The analysis is based on audio...

Proposition of innovative and safe design of grid plate for Tehran research reactor

International Nuclear Information System (INIS)

Jalali, H.R.; Fadaei, A.H.

2017-01-01

Highlights: • An innovative and safe design for grid plate in research reactors proposed. • New grid plate acts as an independent shutdown system. • Neutronic and transient calculation was done using MTR-PC package. • Calculations show that the performance and safety of new design are acceptable. - Abstract: The purpose of this paper is to propose an innovative and safe design of grid plate for Tehran research reactor (TRR) without any reduction in its performance in comparison with the current operation. The new grid plate consisted of two joined cubic with empty walls which are place of fuels and heavy water, respectively. The proposed design is such that the reactor core is divided into two distinct parts using the heavy water. The heavy water is inserted in the walls of the new grid plate. The new design of grid plate by keeping the characteristics of the previous version creates the possibility of shutting the reactor down in critical condition. In this paper, at initial step, a simulation of acceptable benchmark for Tehran research reactor is performed which could be considered reliable and comparable with SAR (Safety Analysis Report) data. In the next step, two different designs are proposed for grid plate and then are applied to reactor core using simulation tools. For the proposed design: core excess reactivity, shutdown margin, control rod worth, neutron flux and kinetic parameters are calculated. Furthermore, the transient analysis was performed for the new design to check the status of reactor safety. Obtained results show that all neutronic parameters for the first operating core and the new design are comparable, and there is no reduction in the efficiency of reference core. Moreover, in the current design, a diverse and independent shutdown system for TRR was included. Nuclear reactor analysis codes including MTR-PC package were employed to carry out these calculations.

ADMET Polymerization Activities of Electrochemically Reduced W-Based Active Species for Ge- and Sn-Containing Dienes

Science.gov (United States)

Imamoglu, Yavuz; Aydogdu, Cemil; Karabulut, Solmaz; Düz, Bülent

In the last 20 years metal atom-containing polymers have become important classes of polymers [1]. Properties like high thermic stability, electric, and photo conductometry make them very interesting for producing films, fibers, and coating [2]. Many of these compounds can be synthesized by conventional methods [3]. For producing metal-containing polymers anionic, cationic, and radicalic polymerizations were used [4-6]. Metal-containing polymers were also synthesized via acyclic diene metathesis (ADMET) polymerization that is facilitated by Schrock’s molybdenum alkylidene, or Grubbs’ ruthenium carbene catalyst [7-9]. In 1979, Gilet and coworkers succeeded in synthesizing metathetically active species from electrochemical reduction of WCl6 and MoCl5 [10,11]. In the light of these works, we have showed that electrochemically generated tungsten-based active species (WCl6-e--Al-CH2Cl2) catalyzes various metathesis-related reactions [12-16].

Process energy reduction

International Nuclear Information System (INIS)

Lowthian, W.E.

1993-01-01

Process Energy Reduction (PER) is a demand-side energy reduction approach which complements and often supplants other traditional energy reduction methods such as conservation and heat recovery. Because the application of PER is less obvious than the traditional methods, it takes some time to learn the steps as well as practice to become proficient in its use. However, the benefit is significant, often far outweighing the traditional energy reduction approaches. Furthermore, the method usually results in a better process having less waste and pollution along with improved yields, increased capacity, and lower operating costs

Resource Wars: An On the Ground Understanding of Mountaintop Removal Coal Mining in Appalachia, West Virginia

Directory of Open Access Journals (Sweden)

Nicole Fabricant

2015-06-01

Full Text Available This article sketches student responses and subsequent political action to directly witnessing the tragedy of Mountaintop Coal Mining (MTR on Kayford Mountain in West Virginia. I have created an "engaged anthropological curriculum" as part of my Resource Wars of 21st Century (an upper level elective course where students spend four days on an active battlefield in order to a expose students first-hand to the stories and testimonials of social, economic, physical degradation caused by MTR.

Determination of reduction yield of lithium metal reduction process

International Nuclear Information System (INIS)

Choi, In Kyu; Cho, Young Hwan; Kim, Taek Jin; Jee, Kwang Young

2004-01-01

Metal reduction of spent oxide fuel is the first step for the effective storage of spent fuel in Korea as well as transmutation purpose of long-lived radio-nuclides. During the reduction of uranium oxide by lithium metal to uranium metal, lithium oxide is stoichiometrically produced. By determining the concentration of lithium oxide in lithium chloride, we can estimate that how much uranium oxide is converted to uranium metal. Previous method to determine the lithium oxide concentration in lithium chloride is tedious and timing consuming. This paper describe the on-line monitoring method of lithium oxide during the reduction process

Modern Reduction Methods

CERN Document Server

Andersson, Pher G

2008-01-01

With its comprehensive overview of modern reduction methods, this book features high quality contributions allowing readers to find reliable solutions quickly and easily. The monograph treats the reduction of carbonyles, alkenes, imines and alkynes, as well as reductive aminations and cross and heck couplings, before finishing off with sections on kinetic resolutions and hydrogenolysis. An indispensable lab companion for every chemist.

A new MTR fuel for a new MTR reactor: UMo for the Jules Horowitz reactor

Energy Technology Data Exchange (ETDEWEB)

Guigon, B. [CEA Cadarache, Dir. de l' Energie Nucleaire DEN, Reacteur Jules Horowitz, 13 - Saint-Paul-lez-Durance (France); Vacelet, H. [Compagnie pour l' Etude et la Realisation de Combustibles Atomiques, CERCA, Etablissement de Romans, 26 (France); Dornbusch, D. [Technicatome, Service d' Architecture Generale, 13 - Aix-en-Provence (France)

2003-07-01

Within some years, the Jules Horowitz Reactor will be the only working experimental reactor (material and fuel testing reactor) in France. It will have to provide facilities for a wide range of needs: from activation analysis to power reactor fuel qualification. In this paper will be presented the main characteristics of the Jules Horowitz Reactor: its total power, neutron flux, fuel element... Safety criteria will be explained. Finally merits and disadvantages of UMo compared to the standard U{sub 3}Si{sub 2} fuel will be discussed. (authors)

A new MTR fuel for a new MTR reactor: UMo for the Jules Horowitz reactor

International Nuclear Information System (INIS)

Guigon, B.; Vacelet, H.; Dornbusch, D.

2000-01-01

Within some years, the Jules Horowitz Reactor will be the only working experimental reactor (material and fuel testing reactor) in France. It will have to provide facilities for a wide range of needs from activation analysis to power reactor fuel qualification. In this paper the main characteristics of the Jules Horowitz Reactor are presented. Safety criteria are explained. Finally, merits and disadvantages of UMo compared to the standard U 3 Si 2 fuel are discussed. (author)

Comparison of pressure between barium reduction and air reduction of the intussusception in children

Energy Technology Data Exchange (ETDEWEB)

Lee, Kyung Hwan; Park, Sang Gyu; Park, Choong Ki; Yoon, Jong Sup [Hallym University College of Medicine, Seoul (Korea, Republic of)

1989-08-15

There are many method of treatment of the intussusception in children, including surgery, barium reduction, air reduction, and saline enema under ultrasonographic monitoring. Among them, barium reduction and air reduction have been used widely as nonsurgical method of treatment in radiologic department. During barium reduction, the bottle filled with barium solution must not be elevated over a 3 feet from the operating table. In air reduction, diagnostic pressure is about 60 mmHg and pressure during reduction usually is maintained between 90 mmHg and 130 mmHg. The authors have studied about pressure difference of barium solution by changing height of the bottle filled with barium solution, and have compared with pressure in air reduction. The results are as follows; 1. Pressure of 20 w/v % barium solution at the 60 cm height is 44.4 mmHg, and 69.6 mmHg at the 90 cm height. 2. Pressure of 40 w/v % barium solution at the 60 cm height is 51.4 mmHg, and 80.1 mmHg at the 90 cm height. 3. Pressure of 40 w/v % barium solution at the 90cm height is much lower than the pressure maintained during air reduction, and this difference in pressure may be one of the causes of low reduction rate in barium reduction then air reduction. 4. The pressure gradient per 10 cm height is about 8.45 mmHg in 20 w/v % barium solution, about 9.21 mmHg in 30 w/v % barium solution, and about 9.72 mmHg 40 w/v % barium solution. 5. Intraluminal pressure difference between the barium reduction and the air reduction is probably of the major causes of rapid diagnosis and high reduction rate in the air reduction.

Comparison of pressure between barium reduction and air reduction of the intussusception in children

International Nuclear Information System (INIS)

Lee, Kyung Hwan; Park, Sang Gyu; Park, Choong Ki; Yoon, Jong Sup

1989-01-01

There are many method of treatment of the intussusception in children, including surgery, barium reduction, air reduction, and saline enema under ultrasonographic monitoring. Among them, barium reduction and air reduction have been used widely as nonsurgical method of treatment in radiologic department. During barium reduction, the bottle filled with barium solution must not be elevated over a 3 feet from the operating table. In air reduction, diagnostic pressure is about 60 mmHg and pressure during reduction usually is maintained between 90 mmHg and 130 mmHg. The authors have studied about pressure difference of barium solution by changing height of the bottle filled with barium solution, and have compared with pressure in air reduction. The results are as follows; 1. Pressure of 20 w/v % barium solution at the 60 cm height is 44.4 mmHg, and 69.6 mmHg at the 90 cm height. 2. Pressure of 40 w/v % barium solution at the 60 cm height is 51.4 mmHg, and 80.1 mmHg at the 90 cm height. 3. Pressure of 40 w/v % barium solution at the 90cm height is much lower than the pressure maintained during air reduction, and this difference in pressure may be one of the causes of low reduction rate in barium reduction then air reduction. 4. The pressure gradient per 10 cm height is about 8.45 mmHg in 20 w/v % barium solution, about 9.21 mmHg in 30 w/v % barium solution, and about 9.72 mmHg 40 w/v % barium solution. 5. Intraluminal pressure difference between the barium reduction and the air reduction is probably of the major causes of rapid diagnosis and high reduction rate in the air reduction

Forecast situation of the blast furnace cohesive zone; Situacion estimada de la zona cohesiva en el horno alto

Energy Technology Data Exchange (ETDEWEB)

Cores, A.; Saiz de Ayala, J.; Mochon, J.; Ruiz-Bustinza, I.; Parra, R.

2010-07-01

A series of sinters are manufactured in the pilot plant, using a mineral mixture, like that blast furnace. The sinters are characterised, by chemical and granulometric analysis and by determining the softening and melting temperatures. In the blast furnace temperatures are determined by using a series of probes in the furnace which make it possible to locate the position of the isotherm of higher temperature of 950 degree centigrade, which correspond to the reserve thermic zone. A model has been developed, proposing and indirect estimation of the shape of the cohesive zone through the determination of the isotherm with the highest temperature in the thermic reserve zone. The values of the softening and melting temperatures of sinters can be used to estimate the isotherms limiting the cohesive zone in the 1300-1400 degree centigrade range. (Author)

Reduction - competitive tomorrow

International Nuclear Information System (INIS)

Worley, L.; Bargerstock, S.

1995-01-01

Inventory reduction is one of the few initiatives that represent significant cost-reduction potential that does not result in personnel reduction. Centerior Energy's Perry nuclear power plant has embarked on an aggressive program to reduce inventory while maintaining plant material availability. Material availability to the plant was above 98%, but at an unacceptable 1994 inventory book value of $47 million with inventory carrying costs calculated at 30% annually

Breast Reduction Surgery

Science.gov (United States)

... considering breast reduction surgery, consult a board-certified plastic surgeon. It's important to understand what breast reduction surgery entails — including possible risks and complications — as ...

The microstructure and coefficient transmission of think films Bi2Te3-xSex, alloyed by terbium

International Nuclear Information System (INIS)

Abdullaev, N.M.; Mekhtieva, S.I.; Jalilov, N.Z.; Memmedov, N.R.; Zeynalov, V.Z.

2007-01-01

The defects of films microstructures of the thermoelectric materials n- and p-type Bi 2 Te 3 -xSe x , alloyed by Tb and Cl, with think, obtained by thermic evaporation in vacuum have been investigated by microscopic methods

Metallothermic reduction of molybdate

International Nuclear Information System (INIS)

Mukherjee, T.K.; Bose, D.K.

1987-01-01

This paper gives a brief account of the investigations conducted so far on metallothermic reduction of high grade molybdenite with particular emphasis on the work carried out in Bhabha Atomic Research Centre. Based on thermochemical considerations, the paper first introduces a number of metallic reductants suitable for use in metallothermic reduction of molybdenite. Aluminium, sodium and tin are found to be suitable reducing agents and very rightly they have found most applications in the research and development efforts on metallothermic reduction of molybdenite. The reduction with tin was conducted on fairly large scale both in vacuum and hydrogen atmosphere. The reaction was reported to be invariant depending mainly on the reduction temperature and a temperature of the order of 1250deg to 1300degC was required for good metal recovery. In comparison to tin, aluminothermic reduction of molybdenite was studied more extensively and it was conducted in closed bomb, vacuum and also in open atmosphere. In aluminothermic reduction, the influence of amount of reducing agent, amount of heat booster, preheating temperature and charging procedure on these metal yield was studied in detail. The reduction generally yielded massive molybdenum metal contaminated with aluminium as the major impurity element. Efforts were made to purify the reduced metal by arc melting, electron beam melting and molten salt electrorefining. 9 refs. (author)

Dry Needling at Myofascial Trigger Spots of Rabbit Skeletal Muscles Modulates the Biochemicals Associated with Pain, Inflammation, and Hypoxia

Directory of Open Access Journals (Sweden)

Yueh-Ling Hsieh

2012-01-01

Full Text Available Background and Purpose. Dry needling is an effective therapy for the treatment of pain associated with myofascial trigger point (MTrP. However, the biochemical effects of dry needling that are associated with pain, inflammation, and hypoxia are unclear. This study investigated the activities of β-endorphin, substance P, TNF-α, COX-2, HIF-1α, iNOS, and VEGF after different dosages of dry needling at the myofascial trigger spots (MTrSs of a skeletal muscle in rabbit. Materials and Methods. Dry needling was performed either with one dosage (1D or five dosages (5D into the biceps femoris with MTrSs in New Zealand rabbits. Biceps femoris, serum, and dorsal root ganglion (DRG were sampled immediately and 5 d after dry needling for β-endorphin, substance P, TNF-α, COX-2, HIF-1α, iNOS, and VEGF immunoassays. Results. The 1D treatment enhanced the β-endorphin levels in the biceps femoris and serum and reduced substance P in the biceps femoris and DRG. The 5D treatment reversed these effects and was accompanied by increase of TNF-α, COX-2, HIF-1α, iNOS, and VEGF production in the biceps femoris. Moreover, the higher levels of these biochemicals were still maintained 5 d after treatment. Conclusion. Dry needling at the MTrSs modulates various biochemicals associated with pain, inflammation, and hypoxia in a dose-dependent manner.

Field Demonstration of a Membrane Process to Separate Nitrogen from Natural Gas

Energy Technology Data Exchange (ETDEWEB)

Kaaeid Lokhandwala

2005-12-22

The original proposal described the construction and operation of a 1 MMscfd treatment system to be operated at a Butcher Energy gas field in Ohio. The gas produced at this field contained 17% nitrogen. During pre-commissioning of the project, a series of well tests showed that the amount of gas in the field was significantly smaller than expected and that the nitrogen content of the wells was very high (25 to 30%). After evaluating the revised cost of the project, Butcher Energy decided that the plant would not be economical and withdrew from the project. Since that time, Membrane Technology and Research, Inc. (MTR) has signed a marketing and sales partnership with ABB Lummus Global, a large multinational corporation. MTR will be working with the company's Randall Gas Technology Group, a supplier of equipment and processing technology to the natural gas industry. Randall's engineering group first found a new site for the project at a North Texas Exploration (NTE) gas processing plant. The plant produced about 1 MMscfd of gas containing 24% nitrogen. The membrane unit was built to bring this gas to 4% nitrogen for delivery to the pipeline. The membrane skid was built by ABB. NTE ordered the required compressor and MTR made the membrane modules for a December 2004 delivery. However, the gas supply was not steady enough for field testing, and MTR/ABB have now located other sites for field testing and commercial development.

Field Demonstration of a Membrane Process to Separate Nitrogen from Natural Gas

Energy Technology Data Exchange (ETDEWEB)

Kaaeid Lokhandwala

2005-12-15

The original proposal described the construction and operation of a 1 MMscfd treatment system to be operated at a Butcher Energy gas field in Ohio. The gas produced at this field contained 17% nitrogen. During pre-commissioning of the project, a series of well tests showed that the amount of gas in the field was significantly smaller than expected and that the nitrogen content of the wells was very high (25 to 30%). After evaluating the revised cost of the project, Butcher Energy decided that the plant would not be economical and withdrew from the project. Since that time, Membrane Technology and Research, Inc. (MTR) has signed a marketing and sales partnership with ABB Lummus Global, a large multinational corporation. MTR is now working with the company's Randall Gas Technology Group, a supplier of equipment and processing technology to the natural gas industry. Randall's engineering group first found a new site for the project at a North Texas Exploration (NTE) gas processing plant. The plant produced about 1 MMscfd of gas containing 24% nitrogen. The membrane unit was built to bring this gas to 4% nitrogen for delivery to the pipeline. The membrane skid was built by ABB. NTE ordered the required compressor and MTR made the membrane modules for a December 2004 delivery. However, the gas supply was not steady enough for field testing, and MTR/ABB have now located other sites for field testing and commercial development.

The methionine salvage pathway in Bacillus subtilis

Directory of Open Access Journals (Sweden)

Danchin Antoine

2002-04-01

Full Text Available Abstract Background Polyamine synthesis produces methylthioadenosine, which has to be disposed of. The cell recycles it into methionine through methylthioribose (MTR. Very little was known about MTR recycling for methionine salvage in Bacillus subtilis. Results Using in silico genome analysis and transposon mutagenesis in B. subtilis we have experimentally uncovered the major steps of the dioxygen-dependent methionine salvage pathway, which, although similar to that found in Klebsiella pneumoniae, recruited for its implementation some entirely different proteins. The promoters of the genes have been identified by primer extension, and gene expression was analyzed by Northern blotting and lacZ reporter gene expression. Among the most remarkable discoveries in this pathway is the role of an analog of ribulose diphosphate carboxylase (Rubisco, the plant enzyme used in the Calvin cycle which recovers carbon dioxide from the atmosphere as a major step in MTR recycling. Conclusions A complete methionine salvage pathway exists in B. subtilis. This pathway is chemically similar to that in K. pneumoniae, but recruited different proteins to this purpose. In particular, a paralogue or Rubisco, MtnW, is used at one of the steps in the pathway. A major observation is that in the absence of MtnW, MTR becomes extremely toxic to the cell, opening an unexpected target for new antimicrobial drugs. In addition to methionine salvage, this pathway protects B. subtilis against dioxygen produced by its natural biotope, the surface of leaves (phylloplane.

KARAKTERISTIK GENETIK Kappaphycus alvarezii SEHAT DAN TERINFEKSI PENYAKIT ICE-ICE DENGAN METODE Amplified Fragment Length Polymorphism (AFLP

Directory of Open Access Journals (Sweden)

Emma Suryati

2013-03-01

Full Text Available Infeksi penyakit ice-ice pada Kappaphycus alvarezii seringkali menyebabkan penurunan produksi yang sangat signifikan. K. alvarezii merupakan alga merah penghasil karaginan yang memiliki nilai ekonomi tinggi dan banyak dimanfaatkan dalam berbagai industri, seperti farmasi, makanan, stabilizer, dan kosmetik. Perbaikan genetik sangat diperlukan untuk meningkatkan produksi. Penelitian ini bertujuan untuk mengetahui karakteristik kemiripan genetik K. alvarezii sehat dan terinfeksi penyakit dari Balai Penelitian dan Pengembangan Budidaya Air Payau (BPPBAP, Maros dengan metode Amplified Fragment Length Polymorphism (AFLP. Pada penelitian ini juga dianalisis K. alvarezii asal Bone (BNE, Gorontalo (GRL, Tambalang (TMB, dan Kendari (KND sebagai kontrol rumput laut sehat. Metode AFLP menggunakan enzim restriksi Psti dan Mset, preamplifikasi dan amplifikasi selektif diawali dengan isolsi DNA, uji genimoc DNA, restriksi dan ligasi. Hasil yang diperoleh menunjukkan penggunaan marker AFLP dengan primer forward P11 dan primer reverse M48, M49 dan M50 terhadap K. alvarezii yang berasal dari Takalar (TKL, dan Mataram (MTR, tanpa infeksi (sehat dan terinfeksi penyakit Takalar ice (TKL+, Mataram ice (MTR+, serta K. alvarezii kontrol (BNE, (GRL, (TMB, dan (KND menghasilkan 519 fragmen dalam 122 lokus dengan ukuran 50 - ~370 pb. Kemiripan genetik K. alvarezii yang terinfeksi penyakit ice-ice lebih rendah jika dibandingkan dengan yang sehat. Kemiripan genetik K. alvarezii dari Takalar sehat (TKL dan terinfeksi ice-ice (TKL+ adalah 0,8176 dan MTR-MTR+ adalah 0,8033.

A randomized trial of pneumatic reduction versus hydrostatic reduction for intussusception in pediatric patients.

Science.gov (United States)

Xie, Xiaolong; Wu, Yang; Wang, Qi; Zhao, Yiyang; Chen, Guobin; Xiang, Bo

2017-08-08

Data of randomly controlled trials comparing the hydrostatic and pneumatic reduction for intussusception in pediatric patients as initial therapy are lacking. The aim of this study was to conduct a randomly controlled trial to compare the effectiveness and safety of the hydrostatic and pneumatic reduction techniques. All intussusception patients who visited West China Hospital of Sichuan University from January 2014 to December 2015 were enrolled in this study in which they underwent pneumatic reduction or hydrostatic reduction. Patients were randomized into ultrasound-guided hydrostatic or X-ray-guided pneumatic reduction group. The data collected includes demographic data, symptoms, signs, and investigations. The primary outcome of the study was the success rate of reduction. And the secondary outcomes of the study were the rates of intestinal perforations and recurrence. A total of 124 children with intussusception who had met the inclusion criteria were enrolled. The overall success rate of this study was 90.32%. Univariable analysis showed that the success rate of hydrostatic reduction with normal saline (96.77%) was significantly higher than that of pneumatic reduction with air (83.87%) (p=0.015). Perforation after reduction was found in only one of the pneumatic reduction group. The recurrence rate of intussusception in the hydrostatic reduction group was 4.84% compared with 3.23% of pneumatic reduction group. Our study found that ultrasound-guided hydrostatic reduction is a simple, safe and effective nonoperative treatment for pediatric patients suffering from intussusceptions, and should be firstly adopted in the treatment of qualified patients. Therapeutic study TYPE OF STUDY: Prospective study. Copyright © 2017 Elsevier Inc. All rights reserved.

Finding optimal exact reducts

KAUST Repository

AbouEisha, Hassan M.

2014-01-01

The problem of attribute reduction is an important problem related to feature selection and knowledge discovery. The problem of finding reducts with minimum cardinality is NP-hard. This paper suggests a new algorithm for finding exact reducts

Relationship between osmotic pressure of the blood and secretion of sweat

Science.gov (United States)

Montuori, A.

1978-01-01

Experiments with cats show that the thermic secretion of sweat represents a specific case of a general law: The central nervous apparatus that controls the secretion of sweat begins to function when the osmotic pressure of the blood drops below normal.

Study of the national electricity system equipment until the year 2000

International Nuclear Information System (INIS)

1980-01-01

This work is about a study by UTE and German consultants. It is to ensure the supply of electricity in times of unfavorable hydrogeological conditions. In this case is necessary to install new thermic units or import energy from neighboring countries

Reprocessing of LEU silicide fuel at Dounreay

International Nuclear Information System (INIS)

Cartwright, P.

1996-01-01

UKAEA have recently reprocessed two LEU silicide fuel elements in their MTR fuel reprocessing plant at Dounreay. The reprocessing was undertaken to demonstrate UKAEA's commitment to the world-wide research reactor communities future needs. Reprocessing of LEU silicide fuel is seen as a waste treatment process, resulting in the production of a liquid feed suitable for conditioning in a stable form of disposal. The uranium product from the reprocessing can be used as a blending feed with the HEU to produce LEU for use in the MTR cycle. (author)

Methylenetetrahydrofolate reductase 677C>T and methionine synthase 2756A>G mutations: no impact on survival, cognitive functioning, or cognitive decline in nonagenarians

DEFF Research Database (Denmark)

Bathum, Lise; von Bornemann Hjelmborg, Jacob; Christiansen, Lene

2007-01-01

BACKGROUND: Several reports have shown an association between homocysteine, cognitive functioning, and survival among the oldest-old. Two common polymorphisms in the genes coding for methylenetetrahydrofolate reductase (MTHFR 677C>T) and methionine synthase (MTR 2756A>G) have an impact on plasma...... homocysteine level. METHODS: We examined the effect of the MTHFR 677C>T and MTR 2756A>G genotypes on baseline cognitive functioning, cognitive decline over 5 years measured in three assessments, and survival in a population-based cohort of 1581 nonagenarians. Cognitive functioning was assessed by using...

Preliminary experience and near future utilization programmes of the MPR-30 fueled by LEU [low enriched uranium

International Nuclear Information System (INIS)

Arbie, B.; Soentono, S.

1987-01-01

The MTR type reactor MPR-30 G.A. Siwabessy, located at PUSPIPTEK Serpong has recently reached its first criticality. This multipurpose reactor is supposed to be the first MTR type reactor in the world that is designed and constructed to be fueled by low enriched uranium. Preliminary experience covering the approach to the first criticality and the excess reactivity loading as well as some thermal hydraulics and power ascension tests are briefly presented and discussed. The near future utilization programmes during and after commissioning are also presented. (Author)

Detection of plastic explosives by thermic neutron radiography

International Nuclear Information System (INIS)

Hacidume, Leo R.; Crispim, Verginia R.; Silva, Ademir X. da

2000-01-01

This work aims to demonstrate the potentiality of the neutron radiography technique, allied to the computerized tomography by transmission, to both detect and visualize plastic explosive samples in several hidden conditions, using a simple scanner as a digitalisation instrument. Each tomographic essay was obtained in the J-9 channel of the Argonauta Research Reactor of IEN/CNEN, in groups of six neutron radiographic projections, performed with an angular increment of 30 in a period of time of 30 minutes for each projection. Two groups of tomographic reconstructions were generated, distinguished by the digitalisation process of the interested lines in the reconstruction plane coming from the projection groups, utilizing a scanner and a microdensitometer, respectively. The reconstruction of the bi-dimensional image of the transverse section, in relation to this plane, was processed making use of the Image reconstruction algorithmic of an image based on the maximum entropy principle (ARIEM). From the qualitative analysis of the images, we conclude that the neutron radiographic system was able to detect the explosive sample in a satisfactory way while the quantitative analysis confirmed the application effectiveness of a scanner to acquire the projection dates whose objective is only a reconnaissance. (author)

Thermic decomposition of biphenyl; Decomposition thermique du biphenyle

Energy Technology Data Exchange (ETDEWEB)

Lutz, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1966-03-01

Liquid and vapour phase pyrolysis of very pure biphenyl obtained by methods described in the text was carried out at 400 C in sealed ampoules, the fraction transformed being always less than 0.1 per cent. The main products were hydrogen, benzene, terphenyls, and a deposit of polyphenyls strongly adhering to the walls. Small quantities of the lower aliphatic hydrocarbons were also found. The variation of the yields of these products with a) the pyrolysis time, b) the state (gas or liquid) of the biphenyl, and c) the pressure of the vapour was measured. Varying the area and nature of the walls showed that in the absence of a liquid phase, the pyrolytic decomposition takes place in the adsorbed layer, and that metallic walls promote the reaction more actively than do those of glass (pyrex or silica). A mechanism is proposed to explain the results pertaining to this decomposition in the adsorbed phase. The adsorption seems to obey a Langmuir isotherm, and the chemical act which determines the overall rate of decomposition is unimolecular. (author) [French] Du biphenyle tres pur, dont la purification est decrite, est pyrolyse a 400 C en phase vapeur et en phase liquide dans des ampoules scellees sous vide, a des taux de decomposition n'ayant jamais depasse 0,1 pour cent. Les produits provenant de la pyrolyse sont essentiellement: l' hydrogene, le benzene, les therphenyles, et un depot de polyphenyles adherant fortement aux parois. En plus il se forme de faibles quantites d'hydrocarbures aliphatiques gazeux. On indique la variation des rendements des differents produits avec la duree de pyrolyse, l'etat gazeux ou liquide du biphenyle, et la pression de la vapeur. Variant la superficie et la nature des parois, on montre qu'en absence de liquide la pyrolyse se fait en phase adsorbee. La pyrolyse est plus active au contact de parois metalliques que de celles de verres (pyrex ou silice). A partir des resultats experimentaux un mecanisme de degradation du biphenyle en phase adsorbee est suggere, l'adsorption paraissant regie par l'isotherme de Langmuir, et l'acte chimique determinant la vitesse globale de la pyrolyse etant monomoleculaire en ce qui concerne le molecule de biphenyle adsorbee. (auteur)

Connection between nitrogen and manganese cycles revealed by transcriptomic analysis in Shewanella algae C6G3

Science.gov (United States)

Michotey, V.; Aigle, A.; Armougom, F.; Mejean, V.; Guasco, S.; Bonin, P.

2016-02-01

In sedimentary systems, the repartition of terminal electron-accepting molecules is often stratified on a permanent or seasonal basis. Just below to oxic zone, the suboxic one is characterized by high concentrations of oxidized inorganic compounds such as nitrate, manganese oxides (MnIII/IV) and iron oxides that are in close vicinity. Several studies have reported unexpected anaerobic nitrite/nitrate production at the expense of ammonium mediated by MnIII/IV, however this transient processes is difficult to discern and poorly understood. In the frame of this study, genes organization of nitrate and MnIII/IV respiration was investigated in S.algae. Additional genes were identified in S. algae compare to S. oneidensis: genes coding for nitrate and nitrite reductase (napA-a and nrfA-2) and an OMC protein (mtrH). In contrast to S. oneidensis, an anaerobic transitory nitrite accumulation at the expense of ammonium was observed in S. algae during growth with MnIII/IV, concomitantly with expression of nitrate/nitrite reductase genes (napA, nrfA, nrfA-2). Among the hypothesis explaining this data, the potential putative expression of unidentified gene able to perform ammonium oxidation was not observed on the global transcriptional level, however several signs of oxidative stress were detected and the existence of a secondary reaction generated by a putative oxidative s could not be excluded. Another option could be the action of reverse reaction by an enzyme such as NrfA or NrfA-2 due to the electron flow equilibrium. Whatever the electron acceptor (Nitrate/ MnIII/IV), the unexpected expression level of of omcA, mtrF, mtrH, mtrC was observed and peaked at the end of the exponential phase. Different expression patterns of the omc genes were observed depending on electron acceptor and growth phase. Only mtrF-2 gene was specifically expressed in Mn(III/IV) condition. Nitrate and Mn(III/IV) respirations seem connected at physiological as well as at transcriptional level

Characterization of the periplasmic redox network that sustains the versatile anaerobic metabolism of Shewanella oneidensis MR-1

Directory of Open Access Journals (Sweden)

Mónica N. Alves

2015-06-01

Full Text Available The versatile anaerobic metabolism of the Gram-negative bacterium Shewanella oneidensis MR-1 (SOMR-1 relies on a multitude of redox proteins found in its periplasm. Most are multiheme cytochromes that carry electrons to terminal reductases of insoluble electron acceptors located at the cell surface, or bona fide terminal reductases of soluble electron acceptors. In this study, the interaction network of several multiheme cytochromes was explored by a combination of NMR spectroscopy, activity assays followed by UV-visible spectroscopy and comparison of surface electrostatic potentials. From these data the small tetraheme cytochrome (STC emerges as the main periplasmic redox shuttle in SOMR-1. It accepts electrons from CymA and distributes them to a number of terminal oxidoreductases involved in the respiration of various compounds. STC is also involved in the electron transfer pathway to reduce nitrite by interaction with the octaheme tetrathionate reductase (OTR, but not with cytochrome c nitrite reductase (ccNiR. In the main pathway leading the metal respiration STC pairs with flavocytochrome c (FccA, the other major periplasmic cytochrome, which provides redundancy in this important pathway. The data reveals that the two proteins compete for the binding site at the surface of MtrA, the decaheme cytochrome inserted on the periplasmic side of the MtrCAB-OmcA outer-membrane complex. However, this is not observed for the MtrA homologues. Indeed, neither STC nor FccA interact with MtrD, the best replacement for MtrA, and only STC is able to interact with the decaheme cytochrome DmsE of the outer-membrane complex DmsEFABGH. Overall, these results shown that STC plays a central role in the anaerobic respiratory metabolism of SOMR-1. Nonetheless, the trans-periplasmic electron transfer chain is functionally resilient as a consequence of redundancies that arise from the presence of alternative pathways that bypass/compete with STC.

Reduction of U3O8 to U by a metallic reductant, Li

International Nuclear Information System (INIS)

Jin-Mok Hur; Sun-Seok Hong; Hansoo Lee

2010-01-01

Reduction of U 3 O 8 was investigated for the recycling of spent oxide fuel from a commercial nuclear power plant. The possible reduction methods were proposed and compared. Based on the thermodynamic analysis, Li metal was selected as a reductant. The optimum reaction temperature for the reduction of U 3 O 8 was investigated at the wider reaction temperature range. The adverse oxidation of U metal by Li 2 O at 1,000 deg C was experimentally verified. Ellingham diagram was constructed to investigate the extent of the uranium oxides reduction when the reaction was carried out above melting point of U metal. (author)

Seawater infiltration effect on thermal degradation of fiber reinforced epoxy composites

Science.gov (United States)

Ibrahim, Mohd Haziq Izzuddin bin; Hassan, Mohamad Zaki bin; Ibrahim, Ikhwan; Rashidi, Ahmad Hadi Mohamed; Nor, Siti Fadzilah M.; Daud, Mohd Yusof Md

2018-05-01

Seawater salinity has been associated with the reduction of polymer structure durability. The aim of this study is to investigate the change in thermal degradation of fiber reinforced epoxy composite due to the presence of seawater. Carbon fiber, carbon/kevlar, fiberglass, and jute that reinforced with epoxy resin was laminated through hand-layup technique. Initially, these specimen was sectioned to 5×5 mm dimension, then immersed in seawater and distilled water at room temperature until it has thoroughly saturated. Following, the thermal degradation analysis using Differential Scanning Calorimetry (DSC), the thermic changes due to seawater infiltration was defined. The finding shows that moisture absorption reduces the glass transition temperature (Tg) of fiber reinforced epoxy composite. However, the glass transition temperature (Tg) of seawater infiltrated laminate composite is compareable with distilled water infiltrated laminate composite. The carbon fiber reinfored epoxy has the highest glass transition temperature out of all specimen.

[Effects of sterilization and disinfection on mechanical properties of Sentalloy springs].

Science.gov (United States)

Maddalone, M; Amalto, L; Cocconi, R; Ciafone, E

1991-01-01

The Authors evaluated mechanic characteristics of open and close titanium coils after two cycles of simulated usage. Coils undergone to thermic autoclaving didn't show any substantial variation in the forces offered compared to those only disinfected, authorizing reusage with igienic guarantees.

ASPECTS REGARDING THE ELECTROTHERMAL HEATING THROUGH ELECTROMAGNETIC INDUCTION

Directory of Open Access Journals (Sweden)

Teodor LEUCA

2009-05-01

Full Text Available The paper present the numerical modeling of the electromagnetic phenomena coupled with the thermic ones when processing the semi-finished products made up of non-ferrous alloy, through electromagnetic induction with the purpose to obtain a homogenous heating of the pieces in the shortest time. Maxwell’s equations that describe the heating process through induction, show that the important quantity, basically important to determine the eddy currents induced in the piece, is the intensity of the magnetic field, resulting the electromagnetic losses, due to their transformation in thermic energy. So far the results of the experiments have show that the intensity of the magnetic field considering a long inductor is more intense in the center of the inductor and weaker at its extremes. The purpose of the numerical modeling is to render solution to homogenize the intensity of the magnetic field according to the geometry of the inductor.

An examination of the effects of mountaintop removal coal mining on respiratory symptoms and COPD using propensity scores.

Science.gov (United States)

Hendryx, Michael; Luo, Juhua

2015-01-01

Previous research on public health consequences of mountaintop removal (MTR) coal mining has been limited by the observational nature of the data. The current study used propensity scores, a method designed to overcome this limitation, to draw more confident causal inferences about mining effects on respiratory health using non-experimental data. These data come from a health survey of 682 adults residing in two rural areas of Virginia, USA characterized by the presence or absence of MTR mining. Persons with a history of occupational exposure as coal miners were excluded. Nine covariates including age, sex, current and former smoking, overweight, obesity, high school education, college education, and exposure to coal as a home-heating source were selected to estimate propensity scores. Propensity scores were tested for balance and then used as weights to create quasi-experimental exposed and unexposed groups. Results indicated that persons in the mountaintop mining group had significantly (p < 0.0001) elevated prevalence of respiratory symptoms and chronic obstructive pulmonary disease. The results suggest that impaired respiratory health results from exposure to MTR environments and not from other risks.

Contribution of l-theanine to the formation of 2,5-dimethylpyrazine, a key roasted peanutty flavor in Oolong tea during manufacturing processes.

Science.gov (United States)

Guo, Xiangyang; Song, Chuankui; Ho, Chi-Tang; Wan, Xiaochun

2018-10-15

l-Theanine, the most abundant amino acid in tea, is widely believed to be associated with the tea taste, however, its contribution to the formation of tea aroma is still unknown. Volatiles were determined and nitrogen-containing compounds formed during manufacturing processes were quantified. Lower levels of total sugar and l-theanine were detected in the Oolong tea product undergoing full fire processing (FFOT) suggesting that l-theanine probably involved in the volatile formation during manufacturing processes. Methylpyrazine and 2,5-dimethylpyrazine, two newly formed compounds in FFOT, together with other volatiles were successfully detected in a model thermal reaction of d-glucose and l-theanine (GT-MTR) but not detectable in thermal reactions with single d-glucose (G-MTR) or l-theanine (T-MTR). The concentration of 2,5-dimethylpyrazine increased significantly by adding additional l-theanine to 2nd roasted tea. Our study demonstrated that l-theanine, at least partly, contributed to the formation of 2,5-dimethylpyrazine, a key roasted peanutty flavor in Oolong tea. Copyright © 2018. Published by Elsevier Ltd.

Reduction operators of Burgers equation.

Science.gov (United States)

Pocheketa, Oleksandr A; Popovych, Roman O

2013-02-01

The solution of the problem on reduction operators and nonclassical reductions of the Burgers equation is systematically treated and completed. A new proof of the theorem on the special "no-go" case of regular reduction operators is presented, and the representation of the coefficients of operators in terms of solutions of the initial equation is constructed for this case. All possible nonclassical reductions of the Burgers equation to single ordinary differential equations are exhaustively described. Any Lie reduction of the Burgers equation proves to be equivalent via the Hopf-Cole transformation to a parameterized family of Lie reductions of the linear heat equation.

Active3 noise reduction

International Nuclear Information System (INIS)

Holzfuss, J.

1996-01-01

Noise reduction is a problem being encountered in a variety of applications, such as environmental noise cancellation, signal recovery and separation. Passive noise reduction is done with the help of absorbers. Active noise reduction includes the transmission of phase inverted signals for the cancellation. This paper is about a threefold active approach to noise reduction. It includes the separation of a combined source, which consists of both a noise and a signal part. With the help of interaction with the source by scanning it and recording its response, modeling as a nonlinear dynamical system is achieved. The analysis includes phase space analysis and global radial basis functions as tools for the prediction used in a subsequent cancellation procedure. Examples are given which include noise reduction of speech. copyright 1996 American Institute of Physics

Vietnam; Poverty Reduction Strategy Paper

OpenAIRE

International Monetary Fund

2004-01-01

This paper assesses the Poverty Reduction Strategy Paper of Vietnam, known as the Comprehensive Poverty Reduction and Growth Strategy (CPRGS). It is an action program to achieve economic growth and poverty reduction objectives. This paper reviews the objectives and tasks of socio-economic development and poverty reduction. The government of Vietnam takes poverty reduction as a cutting-through objective in the process of country socio-economic development and declares its commitment to impleme...

Resting metabolic rate and postprandial thermogenesis in polycystic ovarian syndrome.

Science.gov (United States)

Segal, K R; Dunaif, A

1990-07-01

To determine whether the high frequency of obesity in women with polycystic ovary syndrome (PCO) is related to a defect in energy expenditure, resting metabolic rate (RMR) and the thermic response to a standard meal were compared in 10 obese PCO women, nine obese but otherwise normal women, and 11 lean women. All groups were matched with respect to age and fat-free mass and the two obese groups were matched for degree of obesity. RMR was measured by indirect calorimetry for 3 h on two days: (1) in the postabsorptive state; and (2) after a 720 kcal (3014 kJ) liquid mixed meal. The thermic effect of food, calculated as 3 h postprandial minus fasting RMR, was significantly greater for the lean [52.9 +/- 5.5 kcal/3 h (221 +/- 23 kJ/3 h)] than the obese [17.2 +/- 5.1 kcal/3 h (72 +/- 21 kJ/3 h)] and the PCO women [22.8 +/- 5.2 kcal/3 h (95 +/- 22 kJ/3)], P less than 0.001). The thermic effect of food was negatively related to percent body fat (r = -0.694, P less than 0.001). Resting metabolic rate did not differ significantly among the three groups, and was strongly related to fat-free mass (r = 0.687, P less than 0.001). These results confirm previous reports of blunted thermogenesis in obese individuals, but provide no evidence of altered resting metabolic rate or postprandial thermogenesis in women with PCO compared with normal women of similar degree of obesity.

The Numerical Simulation of Coupling Behavior of Soil with Chemical Pollutant Effects

Science.gov (United States)

Liu, Z. J.; Li, X. K.; Tang, L. Q.

2010-05-01

The coupling behavior of clay plays a role in the integrity of clay barriers used in landfills. The clay barriers are subjected to mechanical and thermal effects coupled with hydraulic behavior, also, if the leachates become in contact with the clay liner, chemical effects may lead to some drastic changes in the properties of the clay. A numerical method to simulate the coupling behavior of soil with chemical pollutant effects is presented. Within the framework of Gens-Alonso model describing the constitutive behavior of unsaturated clay presented in reference[1], basing on the work of Wu[2] and Hueckel[3], a constitutive model describing the chemo-thermo-hydro-mechanical(CTHM) coupling behavior of clays in contact with a single organic contaminant is presented. The thermical softening and chemical softening is considered in the presented model. The strain arising in the material due to chemical and thermical effects can be decomposed into two parts: elastic expansion and plastic compaction. The chemical effects are described in terms of the mass concentration of the contaminant. The increases in temperature and contaminant concentration cause decreases of the pre-consolidation pressure and the cohesion. The mechanisms are called thermical softening and chemical softening. The presented coupled CTHM constitutive model has been integrated into the coupled thermo-hydro-mechanical mathematical model including contaminant transport in porous media. To solve the equilibrium equations, the grogram of finite element methods is developed with a stagger algorithm. The mechanisms taking place due to the coupling behaviour of the clay with a single contaminant solute are analysed with the presented numerical method.

MCNP variance reduction overview

International Nuclear Information System (INIS)

Hendricks, J.S.; Booth, T.E.

1985-01-01

The MCNP code is rich in variance reduction features. Standard variance reduction methods found in most Monte Carlo codes are available as well as a number of methods unique to MCNP. We discuss the variance reduction features presently in MCNP as well as new ones under study for possible inclusion in future versions of the code

Application of nonlinear nodal diffusion method for a small research reactor

International Nuclear Information System (INIS)

Jaradat, Mustafa K.; Alawneh, Luay M.; Park, Chang Je; Lee, Byungchul

2014-01-01

Highlights: • We applied nonlinear unified nodal method for 10 MW IAEA MTR benchmark problem. • TRITION–NEWT system was used to obtain two-group burnup dependent cross sections. • The criticality and power distribution compared with reference (IAEA-TECDOC-233). • Comparison between different fuel materials was conducted. • Satisfactory results were provided using UNM for MTR core calculations. - Abstract: Nodal diffusion methods are usually used for LWR calculations and rarely used for research reactor calculations. A unified nodal method with an implementation of the coarse mesh finite difference acceleration was developed for use in plate type research reactor calculations. It was validated for two PWR benchmark problems and then applied for IAEA MTR benchmark problem for static calculations to check the validity and accuracy of the method. This work was conducted to investigate the unified nodal method capability to treat material testing reactor cores. A 10 MW research reactor core is considered with three calculation cases for low enriched uranium fuel depending on the core burnup status of fresh, beginning-of-life, and end-of-life cores. The validation work included criticality calculations, flux distribution, and power distribution; in addition, a comparison between different fuel materials with the same uranium content was conducted. The homogenized two-group cross sections were generated using the TRITON–NEWT system. The results were compared with a reference, which was taken from IAEA-TECDOC-233. The unified nodal method provides satisfactory results for an all-rod out case, and the three-dimensional, two-group diffusion model can be considered accurate enough for MTR core calculations

Annual report SNET 2003; Rapport annuel SNET 2003

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

This annual report of the SNET (National Society of Electricity and thermic) presents the society activities and the financial report for the year 2003. The society position in the market, the environmental policy, the performance, the workers and financial data are detailed. (A.L.B.)

Annual report SNET 2003

International Nuclear Information System (INIS)

2004-01-01

This annual report of the SNET (National Society of Electricity and thermic) presents the society activities and the financial report for the year 2003. The society position in the market, the environmental policy, the performance, the workers and financial data are detailed. (A.L.B.)

Hidromorfía y condiciones ácuicas en suelos de la llanura aluvial de Tucumán (Argentina Hydromorphy and aquic conditions in soils of the alluvial plain of Tucumán (Argentina

Directory of Open Access Journals (Sweden)

Rodolfo Oscar Zappino

2010-07-01

Full Text Available Se seleccionaron cuatro perfiles de suelo con distinta clase de drenaje con el objetivo de analizar la intensidad del proceso de hidromorfía, y considerar cuáles cumplen con las condiciones ácuicas. Estos fueron: La Aguadita (Udipsamment típico, térmico, bien drenado, La Fronterita XI (Hapludol típico, franco grueso, illítico, térmico, moderadamente bien drenado, La Fronterita X (Argiudol ácuico, franco fino, illítico, térmico, imperfectamente drenado y Famaillá (Argiu-dol ácuico, fino, illítico, térmico, imperfectamente drenado. Los suelos muestran condiciones de endosaturación durante seis meses al año, con un ascenso del nivel freático durante verano-otoño y un descenso en invierno-primavera. La intensidad de la reducción se evaluó en base a la distribución de hierro y manganeso secundarios asociados a los rasgos redoximórficos identificados micromorfológicamente. En los perfiles bien drenados y moderadamente bien drenados, los Fe d y Mn d mostraron escasa movilidad con valores entre 0,50-0,80% y 0,03-0,06%, respectivamente, y rasgos redoximórficos de escaso desarrollo con un índice Mn/Fe d The profiles of four soils with different drainage types were selected in the alluvial plain of Tucumán in order to analyze the intensity of the hydromorphy and detect which of the soils conforms to an aquic conditions. The four types were: La Aguadita (thermic Typic Udipsamment (well-drained, La Fronterita XI (coarse loamy, illitic, thermic Typic Hapludoll (moderately well-drained, La Fronterita X (fine loamy, illitic, thermic Aquic Argiudoll (imperfectly drained, and Famaillá (fine, illitic, thermic Aquic Argiudoll (imperfectly drained. The soils show endosaturation conditions for six months of the year, with an increase in water level during summer-autumn and a decrease in winter-spring. The degree of reduction was assessed in terms of the distribution of iron and manganese associated with redoximorphic features analyzed on a

Reduction of blue tungsten oxide

International Nuclear Information System (INIS)

Wilken, T.; Wert, C.; Woodhouse, J.; Morcom, W.

1975-01-01

A significant portion of commercial tungsten is produced by hydrogen reduction of oxides. Although several modes of reduction are possible, hydrogen reduction is used where high purity tungsten is required and where the addition of other elements or compounds is desired for modification of the metal, as is done for filaments in the lamp industry. Although several investigations of the reduction of oxides have been reported (1 to 5), few principles have been developed which can aid in assessment of current commercial practice. The reduction process was examined under conditions approximating commercial practice. The specific objectives were to determine the effects of dopants, of water vapor in the reducing atmosphere, and of reduction temperature upon: (1) the rate of the reaction by which blue tungsten oxide is reduced to tungsten metal, (2) the intermediate oxides associated with reduction, and (3) the morphology of the resulting tungsten powder

Finding optimal exact reducts

KAUST Repository

AbouEisha, Hassan M.

2014-01-01

The problem of attribute reduction is an important problem related to feature selection and knowledge discovery. The problem of finding reducts with minimum cardinality is NP-hard. This paper suggests a new algorithm for finding exact reducts with minimum cardinality. This algorithm transforms the initial table to a decision table of a special kind, apply a set of simplification steps to this table, and use a dynamic programming algorithm to finish the construction of an optimal reduct. I present results of computer experiments for a collection of decision tables from UCIML Repository. For many of the experimented tables, the simplification steps solved the problem.

INDUSTRIAL BOILER RETROFIT FOR NOX CONTROL: COMBINED SELECTIVE NONCATALYTIC REDUCTION AND SELECTIVE CATALYTIC REDUCTION

Science.gov (United States)

The paper describes retrofitting and testing a 590 kW (2 MBtu/hr), oil-fired, three-pass, fire-tube package boiler with a combined selective noncatalytic reduction (SNCR) and selective catalytic reduction (SCR) system. The system demonstrated 85% nitrogen oxides (NOx) reduction w...

Dolochar as a reductant in the reduction roasting of iron ore slimes

Science.gov (United States)

Rath, Swagat S.; Rao, Danda Srinivas

2017-12-01

The present investigation examines the viability of dolochar, a sponge iron industry waste material, as a reductant in the reduction roasting of iron ore slimes, which are another waste generated by iron ore beneficiation plants. Under statistically determined optimum conditions, which include a temperature of 900°C, a reductant-to-feed mass ratio of 0.35, and a reduction time of 30-45 min, the roasted mass, after being subjected to low-intensity magnetic separation, yielded an iron ore concentrate of approximately 64wt% Fe at a mass recovery of approximately 71% from the feed iron ore slime assaying 56.2wt% Fe. X-ray diffraction analyses indicated that the magnetic products contain magnetite and hematite as the major phases, whereas the nonmagnetic fractions contain quartz and hematite.

Solar energy in Uruguay. Increase the use of solar panels

International Nuclear Information System (INIS)

Matos, V.

2010-01-01

This article is about the future of the solar energy in Uruguay. The main aspects of this kind of energy are solar thermic which is used for cooking food and heating water through solar collectors as well as the photovoltaics which allows the generation of electricity

The anaerobic degradation of organic matter in Danish coastal sediments: iron reduction, manganese reduction, and sulfate reduction

DEFF Research Database (Denmark)

Canfield, Donald Eugene; Thamdrup, B; Hansen, Jens Würgler

1993-01-01

). In the deep portion of the basin, surface Mn enrichments reached 3.5 wt%, and Mn reduction was the only important anaerobic carbon oxidation process in the upper 10 cm of the sediment. In the less Mn-rich sediments from intermediate depths in the basin, Fe reduction ranged from somewhat less, to far more...... speculate that in shallow sediments of the Skagerrak, surface Mn oxides are present in a somewhat reduced oxidation level (deep basin....

Processing method for radioactive sludge

International Nuclear Information System (INIS)

Shoji, Yuichi; Kaneko, Masaaki.

1993-01-01

The concentration of radioactive sludges contained in a storage tank is controlled, thereafter, a filter is charged into a processing vessel to continuously conduct dewatering. Then, the radioactive sludges and an oxidizer are mixed by stirring using a stirring impeller and by vibrations using a vibrator. At the same time, thermic rays are irradiated by using infrared ray lamps to heat and decompose them. Since thermic rays reach the center of the radioactive sludges by the infrared ray lamps, ion exchange resins are sufficiently decomposed and carbonized into inorganic material. Then, a filling hardener such as mortar cement having a good flowability is charged to solidify the wastes. With such procedures, radioactive sludges can be stored under a stable condition for a long period of time by decomposing organic materials into inorganic materials and solidifying them. Further, an operator's radiation exposure dose can remarkably be reduced by applying a predetermined and a stabilization treatment in an identical processing vessel. (N.H.)

Prediction and experimental verification of performance of box type solar cooker. Part II: Cooking vessel with depressed lid

International Nuclear Information System (INIS)

Reddy, Avala Raji; Rao, A.V. Narasimha

2008-01-01

Our previous article (Part I) discussed the theoretical and experimental study of the performance boost obtained by a cooking vessel with central cylindrical cavity on lugs when compared to that of a conventional cylindrical vessel on floor/lugs. This article compares the performance of the cooking vessel with depressed lid on lugs with that of the conventional vessel on lugs. A mathematical model is presented to understand the heat flow process to the cooking vessel and, thereby, to the food material. It is found from the experiments that the cooking vessel with depressed lid results in higher temperature of the thermic fluid loaded in the cooking vessel compared to that of the thermic fluid kept in the conventional vessel when both are placed on lugs. Similar results were obtained by modeling the process mathematically. The average improvement of performance of the vessel with depressed lid is found to be 8.4% better than the conventional cylindrical vessel

estruturas celulares, fibras e compósitos

Directory of Open Access Journals (Sweden)

Carlos Renato Rambo

2006-01-01

Full Text Available Biomodeling is a recently developed technology to manufacture ceramics out of natural structures. After processing, the resulting material exhibits a cellular structure similar to the original. Biomorphic fibers of SiC were produced from bamboo, by means of the carbon-thermic reduction of silic naturally present. Pieces of bamboo when submitted to pyrolysis at 1,500 Celsius degrees (ºC in argon atmosphere promote the reaction between silica and carbon. It generates biomorphical alumina by the vacuum infiltration of aluminium steam in pyrolyzed pre-formed of rattan, pine tree, sisal agave and subsequent oxidation. During vacuum infiltration at 1,600 ºC, bicarbonate and aluminium steam reacted forming Al4C3 totally converted in Al2O3. The biomorphic alumina obtained kept the morphologic characteristics of the original plants on the micrometric level. The microstructural and morphologic characterizations of the biomorphical ceramics were performed by electronic microscopy sweeping, x-ray diffractometry and helium pycnometry.

Air Layer Drag Reduction

Science.gov (United States)

Ceccio, Steven; Elbing, Brian; Winkel, Eric; Dowling, David; Perlin, Marc

2008-11-01

A set of experiments have been conducted at the US Navy's Large Cavitation Channel to investigate skin-friction drag reduction with the injection of air into a high Reynolds number turbulent boundary layer. Testing was performed on a 12.9 m long flat-plate test model with the surface hydraulically smooth and fully rough at downstream-distance-based Reynolds numbers to 220 million and at speeds to 20 m/s. Local skin-friction, near-wall bulk void fraction, and near-wall bubble imaging were monitored along the length of the model. The instrument suite was used to access the requirements necessary to achieve air layer drag reduction (ALDR). Injection of air over a wide range of air fluxes showed that three drag reduction regimes exist when injecting air; (1) bubble drag reduction that has poor downstream persistence, (2) a transitional regime with a steep rise in drag reduction, and (3) ALDR regime where the drag reduction plateaus at 90% ± 10% over the entire model length with large void fractions in the near-wall region. These investigations revealed several requirements for ALDR including; sufficient volumetric air fluxes that increase approximately with the square of the free-stream speed, slightly higher air fluxes are needed when the surface tension is reduced, higher air fluxes are required for rough surfaces, and the formation of ALDR is sensitive to the inlet condition.

Cost analysis of initial highly active antiretroviral therapy regimens for managing human immunodeficiency virus-infected patients according to clinical practice in a hospital setting

Directory of Open Access Journals (Sweden)

Colombo GL

2013-12-01

Full Text Available Giorgio L Colombo,1,2 Antonella Castagna,3 Sergio Di Matteo,2 Laura Galli,3 Giacomo Bruno,2 Andrea Poli,3 Stefania Salpietro,3 Alessia Carbone,3 Adriano Lazzarin3,41Department of Drug Sciences, School of Pharmacy, University of Pavia, Italy; 2Studi Analisi Valutazioni Economiche (S.A.V.E., Milan, 3Infectious Diseases Department, San Raffaele Hospital, Milan, 4Vita-Salute San Raffaele University, Milan, ItalyObjective: In the study reported here, single-tablet regimen (STR versus (vs multi-tablet regimen (MTR strategies were evaluated through a cost analysis in a large cohort of patients starting their first highly active antiretroviral therapy (HAART. Adult human immunodeficiency virus (HIV 1-naïve patients, followed at the San Raffaele Hospital, Milan, Italy, starting their first-line regimen from June 2008 to April 2012 were included in the analysis.Methods: The most frequently used first-line HAART regimens (>10% were grouped into two classes: 1 STR of tenofovir disoproxil fumarate (TDF + emtricitabine (FTC + efavirenz (EFV and 2 MTR including TDF + FTC + EFV, TDF + FTC + atazanavir/ritonavir (ATV/r, TDF + FTC + darunavir/ritonavir (DRV/r, and TDF + FTC + lopinavir/ritoavir (LPV/r. Data were analyzed from the point of view of the Lombardy Regional Health Service. HAART, hospitalizations, visits, medical examinations, and other concomitant non-HAART drug costs were evaluated and price variations included. Descriptive statistics were calculated for baseline demographic, clinical, and laboratory characteristics; associations between categorical variables and type of antiretroviral strategy (STR vs MTR were examined using chi-square or Fisher's exact tests. At multivariate analysis, the generalized linear model was used to identify the predictive factors of the overall costs of the first-line HAART regimens.Results: A total of 474 naïve patients (90% male, mean age 42.2 years, mean baseline HIV-RNA 4.50 log10 copies/mL, and cluster of

Supercritical fluids technology. Pt. 1 General topics

International Nuclear Information System (INIS)

Marongiu, B.; De Giorgi, M. R.; Porcedda, S.; Cadoni, E.

1998-01-01

Supercritical fluids technology is among the emerging 'clean' technologies, that allows the minimization in the use of chemical and thermic treatments and products irradiation, diminishing the quantity of liquid wastes to be treated. In this first article phase equilibria thermodynamics and fluid mechanics of transport phenomena are reviewed [it

Phytoremediation of high phosphorus soil by annual ryegrass and common bermudagrass harvest

Science.gov (United States)

Removal of soil phosphorus (P) in crop harvest is a remediation option for soils high in P. This four-year field-plot study determined P uptake by annual ryegrass (ARG, Lolium multiflorum Lam.) and common bermudagrass (CB, Cynodon dactylon (L.) Pers.) from Ruston soil (fine-loamy, siliceous, thermic...

PREVAIL: Predicting Recovery through Estimation and Visualization of Active and Incident Lesions.

Science.gov (United States)

Dworkin, Jordan D; Sweeney, Elizabeth M; Schindler, Matthew K; Chahin, Salim; Reich, Daniel S; Shinohara, Russell T

2016-01-01

The goal of this study was to develop a model that integrates imaging and clinical information observed at lesion incidence for predicting the recovery of white matter lesions in multiple sclerosis (MS) patients. Demographic, clinical, and magnetic resonance imaging (MRI) data were obtained from 60 subjects with MS as part of a natural history study at the National Institute of Neurological Disorders and Stroke. A total of 401 lesions met the inclusion criteria and were used in the study. Imaging features were extracted from the intensity-normalized T1-weighted (T1w) and T2-weighted sequences as well as magnetization transfer ratio (MTR) sequence acquired at lesion incidence. T1w and MTR signatures were also extracted from images acquired one-year post-incidence. Imaging features were integrated with clinical and demographic data observed at lesion incidence to create statistical prediction models for long-term damage within the lesion. The performance of the T1w and MTR predictions was assessed in two ways: first, the predictive accuracy was measured quantitatively using leave-one-lesion-out cross-validated (CV) mean-squared predictive error. Then, to assess the prediction performance from the perspective of expert clinicians, three board-certified MS clinicians were asked to individually score how similar the CV model-predicted one-year appearance was to the true one-year appearance for a random sample of 100 lesions. The cross-validated root-mean-square predictive error was 0.95 for normalized T1w and 0.064 for MTR, compared to the estimated measurement errors of 0.48 and 0.078 respectively. The three expert raters agreed that T1w and MTR predictions closely resembled the true one-year follow-up appearance of the lesions in both degree and pattern of recovery within lesions. This study demonstrates that by using only information from a single visit at incidence, we can predict how a new lesion will recover using relatively simple statistical techniques. The

The Ultrasonographic Findings of Trigger Points of Myofascial Pain Syndrome in a Rabbit Model

International Nuclear Information System (INIS)

Moon, Kyung Mi; Park, Seog Hee; Lee, Sang Heon; Kim, Joo Hyun; Kim, Han Kyum

2005-01-01

Myofascial pain syndrome (MPS) is a common cause of musculoskeletal pain. Myofascial trigger points (MTrPs) have been repeatedly described by numerous authors. However, there have been few studies in which their existence and behavior was supported and their location confirmed. The purpose of this study was to determine whether diagnostic ultrasonography is an objective diagnostic tool which is able to significantly identify or detect the soft tissue changes in the region of clinically identified active MTrPs by using a rabbit experimental model. Ten MPS model rabbits were used in this study. We made an MPS animal model by causing the rabbits to overuse one leg for 3 weeks by cutting the contralateral L4 spinal nerve root. We compared the ultrasonographic findings of the taut band at pre-OP with those at post-OP during the consecutive three week period. To find the taut bands of the muscle, after skin exposure, the muscles were gently rubbed or pinched with the thumb and index finger on the two opposing surfaces of the muscle across the direction of the fibers. Then, the muscle was held in the same way, but with a 5-8 MHz stick probe being used in place of the thumb. After the palpation of various muscles, we selected the hardest and largest myofascial trigger nodule, in order to observe the ultrasonographic and power Doppler findings of the MPS. The size, shape, echogenecity and vascularity of the MTrPs were observed. The analysis of the results of the ultrasonography revealed that all MTrPs have a hyperechoic area. The mean thickness of the hyperechoic lesion in the biceps was 0.96±0.14 cm in the MPS site (at pre-OP?), and 0.49±0.12 cm at post-OP 3weeks (p < 0.01). The hyperechoic lesions in all of the studied biceps femoris of the rabbits were observed by high resolution ultrasonography. No definitively decreased vascularity was observed within the hyperechoic area by power Doppler imaging. Until now, there has been no objective method for the diagnosis of MPS

Improving outcomes for hospital patients with critical bleeding requiring massive transfusion: the Australian and New Zealand Massive Transfusion Registry study methodology.

Science.gov (United States)

Oldroyd, J C; Venardos, K M; Aoki, N J; Zatta, A J; McQuilten, Z K; Phillips, L E; Andrianopoulos, N; Cooper, D J; Cameron, P A; Isbister, J P; Wood, E M

2016-10-06

The Australian and New Zealand (ANZ) Massive Transfusion (MT) Registry (MTR) has been established to improve the quality of care of patients with critical bleeding (CB) requiring MT (≥ 5 units red blood cells (RBC) over 4 h). The MTR is providing data to: (1) improve the evidence base for transfusion practice by systematically collecting data on transfusion practice and clinical outcomes; (2) monitor variations in practice and provide an opportunity for benchmarking, and feedback on practice/blood product use; (3) inform blood supply planning, inventory management and development of future clinical trials; and (4) measure and enhance translation of evidence into policy and patient blood management guidelines. The MTR commenced in 2011. At each participating site, all eligible patients aged ≥18 years with CB from any clinical context receiving MT are included using a waived consent model. Patient information and clinical coding, transfusion history, and laboratory test results are extracted for each patient's hospital admission at the episode level. Thirty-two hospitals have enrolled and 3566 MT patients have been identified across Australia and New Zealand between 2011 and 2015. The majority of CB contexts are surgical, followed by trauma and gastrointestinal haemorrhage. Validation studies have verified that the definition of MT used in the registry correctly identifies 94 % of CB events, and that the median time of transfusion for the majority of fresh products is the 'product event issue time' from the hospital blood bank plus 20 min. Data linkage between the MTR and mortality databases in Australia and New Zealand will allow comparisons of risk-adjusted mortality estimates across different bleeding contexts, and between countries. Data extracts will be examined to determine if there are differences in patient outcomes according to transfusion practice. The ratios of blood components (e.g. FFP:RBC) used in different types of critical bleeding will also

Mindfulness-Based Stress Reduction

Science.gov (United States)

... R S T U V W X Y Z Mindfulness-Based Stress Reduction (MBSR) Information 6 Things You ... Disease and Dementia (12/20/13) Research Spotlights Mindfulness-Based Stress Reduction, Cognitive-Behavioral Therapy Shown To ...

Lack of association between methionine synthase A2756G polymorphism and digestive system cancer risk: evidence from 3,9327 subjects.

Directory of Open Access Journals (Sweden)

Yuan Zhao

Full Text Available BACKGROUND: Polymorphisms in genes involved in the metabolism of folate and methyl groups have been implicated with risk of digestive system cancer. Methionine synthase (MTR plays a central role in folate metabolism, thereby affecting DNA methylation. The association between A2756G polymorphism (rs1805087 in MTR and digestive system cancer susceptibility was inconsistent in previous studies. To investigate this inconsistency, we performed this meta-analysis. METHODS: Databases including Pubmed, EMBASE, ISI Web of Science and China National Knowledge Infrastructure (CNKI were searched to find relevant studies. Odds ratios (ORs with 95% confidence intervals (CIs were used to assess the strength of association. Potential sources of heterogeneity were also assessed by subgroup analysis and meta-regression. RESULTS: A total of 29 articles with 15,368 patients and 23,959 controls were included. We found no association between MTR A2756G polymorphism and digestive system cancer in overall population (G allele: OR = 1.03, 95% CI = 0.98-1.09, P = 0.25; dominant model: OR = 1.03, 95% CI = 0.97-1.10, P = 0.33; recessive model: OR = 1.02, 95% CI = 0.89-1.17, P = 0.79. In the stratified analyses according to cancer type, sample size and genotyping method, no evidence of any gene-disease association was obtained in almost all genetic models. However, marginal significant associations were found for East Asians and hospital-based studies. CONCLUSIONS: This meta-analysis suggests that there is no significant association between the MTR A2756G polymorphism and digestive system cancer risk.

Low-pressure

Energy Technology Data Exchange (ETDEWEB)

Baker, Richard [Membrane Technology And Research, Inc., Newark, CA (United States); Kniep, Jay [Membrane Technology And Research, Inc., Newark, CA (United States); Hao, Pingjiao [Membrane Technology And Research, Inc., Newark, CA (United States); Chan, Chi Cheng [Membrane Technology And Research, Inc., Newark, CA (United States); Nguyen, Vincent [Membrane Technology And Research, Inc., Newark, CA (United States); Huang, Ivy [Membrane Technology And Research, Inc., Newark, CA (United States); Amo, Karl [Membrane Technology And Research, Inc., Newark, CA (United States); Freeman, Brice [Membrane Technology And Research, Inc., Newark, CA (United States); Fulton, Don [Membrane Technology And Research, Inc., Newark, CA (United States); Ly, Jennifer [Membrane Technology And Research, Inc., Newark, CA (United States); Lipscomb, Glenn [Membrane Technology And Research, Inc., Newark, CA (United States); Lou, Yuecun [Membrane Technology And Research, Inc., Newark, CA (United States); Gogar, Ravikumar [Membrane Technology And Research, Inc., Newark, CA (United States)

2015-01-29

This final technical progress report describes work conducted by Membrane Technology and Research, Inc. (MTR) for the Department of Energy (DOE NETL) on development of low-pressure membrane contactors for carbon dioxide (CO₂) capture from power plant flue gas (award number DE-FE0007553). The work was conducted from October 1, 2011 through September 30, 2014. The overall goal of this three-year project was to build and operate a prototype 500 m² low-pressure sweep membrane module specifically designed to separate CO₂ from coal-fired power plant flue gas. MTR was assisted in this project by a research group at the University of Toledo, which contributed to the computational fluid dynamics (CFD) analysis of module design and process simulation. This report details the work conducted to develop a new type of membrane contactor specifically designed for the high-gas-flow, low-pressure, countercurrent sweep operation required for affordable membrane-based CO₂ capture at coal power plants. Work for this project included module development and testing, design and assembly of a large membrane module test unit at MTR, CFD comparative analysis of cross-flow, countercurrent, and novel partial-countercurrent sweep membrane module designs, CFD analysis of membrane spacers, design and fabrication of a 500 m² membrane module skid for field tests, a detailed performance and cost analysis of the MTR CO₂ capture process with low-pressure sweep modules, and a process design analysis of a membrane-hybrid separation process for CO₂ removal from coal-fired flue gas. Key results for each major task are discussed in the report.

Association Study between Folate Pathway Gene Single Nucleotide Polymorphisms and Gastric Cancer in Koreans

Directory of Open Access Journals (Sweden)

Jae-Young Yoo

2012-09-01

Full Text Available Gastric cancer is ranked as the most common cancer in Koreans. A recent molecular biological study about the folate pathway gene revealed the correlation with a couple of cancer types. In the folate pathway, several genes are involved, including methylenetetrahydrofolate reductase (MTHFR, methyltetrahydrofolate-homocysteine methyltransferase reductase (MTRR, and methyltetrahydrofolate-homocysteine methyltransferase (MTR. The MTHFR gene has been reported several times for the correlation with gastric cancer risk. However, the association of the MTRR or MTR gene has not been reported to date. In this study, we investigated the association between the single nucleotide polymorphisms (SNPs of the MTHFR, MTRR, and MTR genes and the risk of gastric cancer in Koreans. To identify the genetic association with gastric cancer, we selected 17 SNPs sites in folate pathway-associated genes of MTHFR, MTR, and MTRR and tested in 1,261 gastric cancer patients and 375 healthy controls. By genotype analysis, estimating odds ratios and 95% confidence intervals (CI, rs1801394 in the MTRR gene showed increased risk for gastric cacner, with statistical significance both in the codominant model (odds ratio [OR], 1.39; 95% CI, 1.04 to 1.85 and dominant model (OR, 1.34; 95% CI, 1.02 to 1.75. Especially, in the obese group (body mass index ≥ 25 kg/m2, the codominant (OR, 9.08; 95% CI, 1.01 to 94.59 and recessive model (OR, 3.72; 95% CI, 0.92 to 16.59 showed dramatically increased risk (p < 0.05. In conclusion, rs1801394 in the MTRR gene is associated with gastric cancer risk, and its functional significance need to be validated.

Alcohol harm reduction in Europe

DEFF Research Database (Denmark)

Herring, Rachel; Betsy, Thom; Beccaria, Franca

2010-01-01

The EMCDDA’s 10th scientific monograph, entitled Harm reduction: evidence, impacts and challenges provides a comprehensive overview of the harm reduction field. Part I of the monograph looks back at the emergence of harm reduction approaches and their diffusion, and explores the concept from diff...

State of the direct reduction and reduction smelting processes

Directory of Open Access Journals (Sweden)

Markotić A.

2002-01-01

Full Text Available For quite a long time efforts have been made to develop processes for producing iron i.e. steel without employing conventional procedures - from ore, coke, blast furnace, iron, electric arc furnace, converter to steel. The insufficient availability and the high price of the coking coals have forced many countries to research and adopt the non-coke-consuming reduction and metal manufacturing processes (non-coke metallurgy, direct reduction, direct processes. This paper represents a survey of the most relevant processes from this domain by the end of 2000, which display a constant increase in the modern process metallurgy.

Dissolution of Material and Test reactor Fuel in an H-Canyon Dissolver

Energy Technology Data Exchange (ETDEWEB)

Daniel, W. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Rudisill, T. S. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); O' Rourke, P. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2017-01-26

In an amended record of decision for the management of spent nuclear fuel (SNF) at the Savannah River Site, the US Department of Energy has authorized the dissolution and recovery of U from 1000 bundles of Al-clad SNF. The SNF is fuel from domestic and foreign research reactors and is typically referred to as Material Test Reactor (MTR) fuel. Bundles of MTR fuel containing assemblies fabricated from U-Al alloys (or other U compounds) are currently dissolved using a Hg-catalyzed HNO3 flowsheet. Since the development of the existing flowsheet, improved experimental methods have been developed to more accurately characterize the offgas composition and generation rate during laboratory dissolutions. Recently, these new techniques were successfully used to develop a flowsheet for the dissolution of High Flux Isotope Reactor (HFIR) fuel. Using the data from the HFIR dissolution flowsheet development and necessary laboratory experiments, the Savannah River National Laboratory (SRNL) was requested to define flowsheet conditions for the dissolution of MTR fuels. With improved offgas characterization techniques, SRNL will be able define the number of bundles of fuel which can be charged to an H-Canyon dissolver with much less conservatism.

Single Tablet Regimen Usage and Efficacy in the Treatment of HIV Infection in Australia

Directory of Open Access Journals (Sweden)

B. Armstrong

2015-01-01

Full Text Available Single tablet regimens (STRs for HIV infection improve patient satisfaction, quality of life, medication adherence, and virological suppression compared to multitablet regimens (MTRs. This is the first study assessing STR uptake and durability in Australia. This retrospective audit of all patients receiving an STR (n=299 at a large Sydney HIV clinic (January 2012–December 2013 assessed patient demographics, treatment prior to STR, HIV RNA load and CD4 during MTR and STR dosing, and reasons for STR switch. 206 patients switched from previous antiretroviral treatment to an STR, of which 88% switched from an MTR. Reasons for switching included desire to simplify treatment (57%, reduced side effects or toxicity (18%, and cost-saving for the patient. There was no switching for virological failure. Compared to when on an MTR, patients switching to an STR had significantly lower HIV RNA counts (p<0.001 and significantly higher CD4 counts (p<0.001. The discontinuation rate from STR was very low and all patients who switched to an STR maintained virological suppression throughout the study duration, although the study is limited by the absence of a control group.

Potential for waste reduction

International Nuclear Information System (INIS)

Warren, J.L.

1990-01-01

The author focuses on wastes considered hazardous under the Resource Conservation and Recovery Act. This chapter discusses wastes that are of interest as well as the factors affecting the quantity of waste considered available for waste reduction. Estimates are provided of the quantities of wastes generated. Estimates of the potential for waste reduction are meaningful only to the extent that one can understand the amount of waste actually being generated. Estimates of waste reduction potential are summarized from a variety of government and nongovernment sources

Biochemistry of Catabolic Reductive Dehalogenation.

Science.gov (United States)

Fincker, Maeva; Spormann, Alfred M

2017-06-20

A wide range of phylogenetically diverse microorganisms couple the reductive dehalogenation of organohalides to energy conservation. Key enzymes of such anaerobic catabolic pathways are corrinoid and Fe-S cluster-containing, membrane-associated reductive dehalogenases. These enzymes catalyze the reductive elimination of a halide and constitute the terminal reductases of a short electron transfer chain. Enzymatic and physiological studies revealed the existence of quinone-dependent and quinone-independent reductive dehalogenases that are distinguishable at the amino acid sequence level, implying different modes of energy conservation in the respective microorganisms. In this review, we summarize current knowledge about catabolic reductive dehalogenases and the electron transfer chain they are part of. We review reaction mechanisms and the role of the corrinoid and Fe-S cluster cofactors and discuss physiological implications.

Reduction corporoplasty.

Science.gov (United States)

Hakky, Tariq S; Martinez, Daniel; Yang, Christopher; Carrion, Rafael E

2015-01-01

Here we present the first video demonstration of reduction corporoplasty in the management of phallic disfigurement in a 17 year old man with a history sickle cell disease and priapism. Surgical management of aneurysmal dilation of the corpora has yet to be defined in the literature. We preformed bilateral elliptical incisions over the lateral corpora as management of aneurysmal dilation of the corpora to correct phallic disfigurement. The patient tolerated the procedure well and has resolution of his corporal disfigurement. Reduction corporoplasty using bilateral lateral elliptical incisions in the management of aneurysmal dilation of the corpora is a safe an feasible operation in the management of phallic disfigurement.

Microbial reductive dehalogenation.

OpenAIRE

Mohn, W W; Tiedje, J M

1992-01-01

A wide variety of compounds can be biodegraded via reductive removal of halogen substituents. This process can degrade toxic pollutants, some of which are not known to be biodegraded by any other means. Reductive dehalogenation of aromatic compounds has been found primarily in undefined, syntrophic anaerobic communities. We discuss ecological and physiological principles which appear to be important in these communities and evaluate how widely applicable these principles are. Anaerobic commun...

MRT fuel element inspection at Dounreay

Energy Technology Data Exchange (ETDEWEB)

Gibson, J.

1997-08-01

To ensure that their production and inspection processes are performed in an acceptable manner, ie. auditable and traceable, the MTR Fuel Element Fabrication Plant at Dounreay operates to a documented quality system. This quality system, together with the fuel element manufacturing and inspection operations, has been independently certified to ISO9002-1987, EN29002-1987 and BS5750:Pt2:1987 by Lloyd`s Register Quality Assurance Limited (LRQA). This certification also provides dual accreditation to the relevant German, Dutch and Australian certification bodies. This paper briefly describes the quality system, together with the various inspection stages involved in the manufacture of MTR fuel elements at Dounreay.

Associations between insulin action and integrity of brain microstructure differ with familial longevity and with age

DEFF Research Database (Denmark)

Akintola, Abimbola A; van den Berg, Annette; van Buchem, Mark A

2015-01-01

[fasted glucose and glucose area-under-the-curve (AUC)], insulin resistance [fasted insulin, AUCinsulin, and homeostatic model assessment of insulin resistance (HOMA-IR)], and pancreatic Beta cell secretory capacity (insulinogenic index). 3 Tesla MRI and Magnetization Transfer (MT) imaging MT-ratio (MTR......-height in gray and white matter was inversely associated with AUCinsulin, fasted insulin, HOMA-IR and insulinogenic-index (all p 65 years): in younger controls, significantly stronger inverse associations were observed between MTR peak-height and fasted glucose......, AUCglucose, fasted insulin, AUCinsulin and HOMA-IR in gray matter; and for AUCglucose, fasted insulin and HOMA-IR in white matter (all P-interaction

Overall Reduction Kinetics of Low-grade Pyrolusite Using a Mixture of Hemicellulose and Lignin as Reductant

Directory of Open Access Journals (Sweden)

Yun-Fei Long

2015-11-01

Full Text Available Manganese is widely used in many fields. Many efforts have been made to recover manganese from low-grade pyrolusite due to the depletion of high-grade manganese ore. Thus, it is of practical significance to develop a clean, energy-saving and environmentally friendly technical route to reduce the low-grade pyrolusite. The reported results show that biomass wastes from crops, crop waste, wood and wood waste are environmentally friendly, energy-saving, and low-cost reducing agents for roasting reduction of low-grade pyrolusite. Kinetics of the reduction reactions is necessary for an efficient design of biomass reduction of pyrolusite. Therefore, it is important to look for a general kinetics equation to describe the reduction of pyrolusite by different kinds of biomass, because there is a wide variety of biomass wastes, meaning that it is impossible to investigate the kinetics for each biomass waste. In this paper, thermal gravimetric analysis and differential thermal analysis were applied to study the overall reduction kinetics of pyrolusite using a mixture of hemicellulose and lignin, two major components of biomass. Overall reduction process is the overlap of the respective reduction processes. A new empirical equation based on the Johnson–Mehl–Avrami equation can be used to describe the respective reduction kinetics using hemicellulose and lignin as reductants, and the corresponding apparent activation energy is 30.14 kJ mol−1 and 38.91 kJ mol−1, respectively. The overall kinetic model for the reduction of pyrolusite by the mixture of hemicellulose and lignin can be simulated by the summation of the respective kinetics by considering their mass-loss fractions, while a unit step function was used to avoid the invalid conversion data. The obtained results in this work are necessary to understand the biomass reduction of pyrolusite and provide valuable assistance in the development of a general kinetics equation.

Recursions of Symmetry Orbits and Reduction without Reduction

Directory of Open Access Journals (Sweden)

Andrei A. Malykh

2011-04-01

Full Text Available We consider a four-dimensional PDE possessing partner symmetries mainly on the example of complex Monge-Ampère equation (CMA. We use simultaneously two pairs of symmetries related by a recursion relation, which are mutually complex conjugate for CMA. For both pairs of partner symmetries, using Lie equations, we introduce explicitly group parameters as additional variables, replacing symmetry characteristics and their complex conjugates by derivatives of the unknown with respect to group parameters. We study the resulting system of six equations in the eight-dimensional space, that includes CMA, four equations of the recursion between partner symmetries and one integrability condition of this system. We use point symmetries of this extended system for performing its symmetry reduction with respect to group parameters that facilitates solving the extended system. This procedure does not imply a reduction in the number of physical variables and hence we end up with orbits of non-invariant solutions of CMA, generated by one partner symmetry, not used in the reduction. These solutions are determined by six linear equations with constant coefficients in the five-dimensional space which are obtained by a three-dimensional Legendre transformation of the reduced extended system. We present algebraic and exponential examples of such solutions that govern Legendre-transformed Ricci-flat Kähler metrics with no Killing vectors. A similar procedure is briefly outlined for Husain equation.

Bubble-induced skin-friction drag reduction and the abrupt transition to air-layer drag reduction

Science.gov (United States)

Elbing, Brian R.; Winkel, Eric S.; Lay, Keary A.; Ceccio, Steven L.; Dowling, David R.; Perlin, Marc

To investigate the phenomena of skin-friction drag reduction in a turbulent boundary layer (TBL) at large scales and high Reynolds numbers, a set of experiments has been conducted at the US Navy's William B. Morgan Large Cavitation Channel (LCC). Drag reduction was achieved by injecting gas (air) from a line source through the wall of a nearly zero-pressure-gradient TBL that formed on a flat-plate test model that was either hydraulically smooth or fully rough. Two distinct drag-reduction phenomena were investigated; bubble drag reduction (BDR) and air-layer drag reduction (ALDR).The streamwise distribution of skin-friction drag reduction was monitored with six skin-friction balances at downstream-distance-based Reynolds numbers to 220 million and at test speeds to 20.0msinitial zone1. These results indicated that there are three distinct regions associated with drag reduction with air injection: Region I, BDR; Region II, transition between BDR and ALDR; and Region III, ALDR. In addition, once ALDR was established: friction drag reduction in excess of 80% was observed over the entire smooth model for speeds to 15.3ms1 with the surface fully roughened (though approximately 50% greater volumetric air flux was required); and ALDR was sensitive to the inflow conditions. The sensitivity to the inflow conditions can be mitigated by employing a small faired step (10mm height in the experiment) that helps to create a fixed separation line.

Electrochemical Reduction Process for Pyroprocessing

Energy Technology Data Exchange (ETDEWEB)

Choi, Eun-Young; Hong, Sun-Seok; Park, Wooshin; Im, Hun Suk; Oh, Seung-Chul; Won, Chan Yeon; Cha, Ju-Sun; Hur, Jin-Mok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-06-15

Nuclear energy is expected to meet the growing energy demand while avoiding CO{sub 2} emission. However, the problem of accumulating spent fuel from current nuclear power plants which is mainly composed of uranium oxides should be addressed. One of the most practical solutions is to reduce the spent oxide fuel and recycle it. Next-generation fuel cycles demand innovative features such as a reduction of the environmental load, improved safety, efficient recycling of resources, and feasible economics. Pyroprocessing based on molten salt electrolysis is one of the key technologies for reducing the amount of spent nuclear fuel and destroying toxic waste products, such as the long-life fission products. The oxide reduction process based on the electrochemical reduction in a LiCl-Li{sub 2}O electrolyte has been developed for the volume reduction of PWR (Pressurized Water Reactor) spent fuels and for providing metal feeds for the electrorefining process. To speed up the electrochemical reduction process, the influences of the feed form for the cathode and the type of anode shroud on the reduction rate were investigated.

Heat and mass transfers in the jets; Transferts de chaleur et de masse dans les jets

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

This day on the heat and mass transfers in the jets, was organized by the SFT (French Society of Thermic) to present the state of the art in the domain. Fifteen presentations allowed the participants to discuss about turbulent flows, simulation of fluid flow and jets impacts. (A.L.B.)

Reduction Corporoplasty

Directory of Open Access Journals (Sweden)

Tariq S. Hakky

2015-04-01

Full Text Available Objective Here we present the first video demonstration of reduction corporoplasty in the management of phallic disfigurement in a 17 year old man with a history sickle cell disease and priapism. Introduction Surgical management of aneurysmal dilation of the corpora has yet to be defined in the literature. Materials and Methods: We preformed bilateral elliptical incisions over the lateral corpora as management of aneurysmal dilation of the corpora to correct phallic disfigurement. Results The patient tolerated the procedure well and has resolution of his corporal disfigurement. Conclusions Reduction corporoplasty using bilateral lateral elliptical incisions in the management of aneurysmal dilation of the corpora is a safe an feasible operation in the management of phallic disfigurement.

Development of reduction technology for oxide fuel. Behaviour of rare-earth in lithium reduction process

International Nuclear Information System (INIS)

Kato, Tetsuya; Usami, Tsuyoshi; Yuda, Ryoichi; Kurata, Masateru; Moriyama, Hirotake

2000-01-01

Solubility measurements of rare-earth oxides in molten LiCl-Li 2 O salt and reduction tests of UO 2 doped with rare-earth oxides were carried out to determine the behavior of rare-earths in lithium reduction process. The solubility of rare-earth oxides increases in the order of Gd 2 O concentration. In multi-element systems including 6 rare-earth oxides, the solubility of each element is smaller than that in the individual systems. In the reduction tests, more than 90% of UO 2 was reduced within 1 hour after starting reduction and about 7% of rare-earths eluded into the LiCl molten salt bath containing Li 2 O which is formed by the reduction of UO 2 . The rare-earth concentrations in the bath were evaluated using the solubility data, assuming that rare-earth oxides in multi-element systems form solid solution as the equilibrium solid phase and that the activity coefficients in the solid phase are independent of the compositions. The calculated concentrations are consistent with the experimental ones obtained in the reduction tests. (author)

Sex-work harm reduction.

Science.gov (United States)

Rekart, Michael L

2005-12-17

Sex work is an extremely dangerous profession. The use of harm-reduction principles can help to safeguard sex workers' lives in the same way that drug users have benefited from drug-use harm reduction. Sex workers are exposed to serious harms: drug use, disease, violence, discrimination, debt, criminalisation, and exploitation (child prostitution, trafficking for sex work, and exploitation of migrants). Successful and promising harm-reduction strategies are available: education, empowerment, prevention, care, occupational health and safety, decriminalisation of sex workers, and human-rights-based approaches. Successful interventions include peer education, training in condom-negotiating skills, safety tips for street-based sex workers, male and female condoms, the prevention-care synergy, occupational health and safety guidelines for brothels, self-help organisations, and community-based child protection networks. Straightforward and achievable steps are available to improve the day-to-day lives of sex workers while they continue to work. Conceptualising and debating sex-work harm reduction as a new paradigm can hasten this process.

Reduction of hexavalent chromium by fasted and fed human gastric fluid. II. Ex vivo gastric reduction modeling

Energy Technology Data Exchange (ETDEWEB)

Kirman, Christopher R., E-mail: ckirman@summittoxicology.com [Summit Toxicology, Orange Village, OH, 44022 (United States); Suh, Mina, E-mail: msuh@toxstrategies.com [ToxStrategies, Inc., Mission Viejo, CA, 92692 (United States); Hays, Sean M., E-mail: shays@summittoxicology.com [Summit Toxicology, Allenspark, CO, 8040 (United States); Gürleyük, Hakan, E-mail: hakan@brooksrand.com [Brooks Applied Labs, Bothell, WA, 98011 (United States); Gerads, Russ, E-mail: russ@brooksrand.com [Brooks Applied Labs, Bothell, WA, 98011 (United States); De Flora, Silvio, E-mail: sdf@unige.it [Department of Health Sciences, University of Genoa, 16132 Genoa (Italy); Parker, William, E-mail: william.parker@duke.edu [Duke University Medical Center, Department of Surgery, Durham, NC, 27710 (United States); Lin, Shu, E-mail: shu.lin@duke.edu [Duke University Medical Center, Department of Surgery, Durham, NC, 27710 (United States); Haws, Laurie C., E-mail: lhaws@toxstrategies.com [ToxStrategies, Inc., Katy, TX, 77494 (United States); Harris, Mark A., E-mail: mharris@toxstrategies.com [ToxStrategies, Inc., Austin, TX, 78751 (United States); Proctor, Deborah M., E-mail: dproctor@toxstrategies.com [ToxStrategies, Inc., Mission Viejo, CA, 92692 (United States)

2016-09-01

To extend previous models of hexavalent chromium [Cr(VI)] reduction by gastric fluid (GF), ex vivo experiments were conducted to address data gaps and limitations identified with respect to (1) GF dilution in the model; (2) reduction of Cr(VI) in fed human GF samples; (3) the number of Cr(VI) reduction pools present in human GF under fed, fasted, and proton pump inhibitor (PPI)-use conditions; and (4) an appropriate form for the pH-dependence of Cr(VI) reduction rate constants. Rates and capacities of Cr(VI) reduction were characterized in gastric contents from fed and fasted volunteers, and from fasted pre-operative patients treated with PPIs. Reduction capacities were first estimated over a 4-h reduction period. Once reduction capacity was established, a dual-spike approach was used in speciated isotope dilution mass spectrometry analyses to characterize the concentration-dependence of the 2nd order reduction rate constants. These data, when combined with previously collected data, were well described by a three-pool model (pool 1 = fast reaction with low capacity; pool 2 = slow reaction with higher capacity; pool 3 = very slow reaction with higher capacity) using pH-dependent rate constants characterized by a piecewise, log-linear relationship. These data indicate that human gastric samples, like those collected from rats and mice, contain multiple pools of reducing agents, and low concentrations of Cr(VI) (< 0.7 mg/L) are reduced more rapidly than high concentrations. The data and revised modeling results herein provide improved characterization of Cr(VI) gastric reduction kinetics, critical for Cr(VI) pharmacokinetic modeling and human health risk assessment. - Highlights: • SIDMS allows for measurement of Cr(VI) reduction rate in gastric fluid ex vivo • Human gastric fluid has three reducing pools • Cr(VI) in drinking water at < 0.7 mg/L is rapidly reduced in human gastric fluid • Reduction rate is concentration- and pH-dependent • A refined PK

Fraction Reduction in Membrane Systems

Directory of Open Access Journals (Sweden)

Ping Guo

2014-01-01

Full Text Available Fraction reduction is a basic computation for rational numbers. P system is a new computing model, while the current methods for fraction reductions are not available in these systems. In this paper, we propose a method of fraction reduction and discuss how to carry it out in cell-like P systems with the membrane structure and the rules with priority designed. During the application of fraction reduction rules, synchronization is guaranteed by arranging some special objects in these rules. Our work contributes to performing the rational computation in P systems since the rational operands can be given in the form of fraction.

Enzymatic reduction of U(VI) in groundwaters; Reduction enzymatique de U(VI) dans des eaux souterraines

Energy Technology Data Exchange (ETDEWEB)

Addelouas, A.; Gong, W. [Center for Radioactive Waste Management, Advanced Materials Laboratory, 1001 University, Albuquerque (United States); Lutze, W.; Nuttall, E. [New Mexico Univ., Albuquerque, NM (United States). Dept. of Chemical and Nuclear Engineering; Fritz, B.; Crovisier, J.L. [Centre National de la Recherche Scientifique (CNRS), 67 - Strasbourg (France). Centre de Sedimentologie et Geochimie de la Surface

1999-03-01

The use of enzymatic reduction of U(VI) in remediation of groundwater contaminated with U(VI) is receiving considerable attention. Certain strains of bacteria can combine the oxidation of an organic compound to the reduction of U(VI) to U(IV), which precipitates as uraninite. In the present study, we tested the reduction of U(VI) in groundwaters with various origins and compositions. In all groundwaters u(VI) was reduced by sulfate reducing bacteria that had been activated by ethanol and tri-metaphosphate. The reduction rate of U(VI) depends on sulfate concentration in water and the abundance of bacteria in the system. This work shows that bacteria capable of U(VI) reduction are ubiquitous in nature, and suggests the possibility of a large application of the enzymatic reduction of U(VI) for in situ clean up of groundwaters contaminated with uranium. (authors) 12 refs.

Bibliographic Review about Solar Hydrogen Production Through Thermochemical Cycles; Revision Bibliografica sobre la Produccion de Hidrogeno Solar Mediante Ciclos Termoquimicos

Energy Technology Data Exchange (ETDEWEB)

Fernandez Saavedra, R.

2007-12-28

This report presents a summary of the different thermical processes used to obtain hydrogen through solar energy, paying more attention to the production of hydrogen from water through thermochemical cycles. In this aspect, it is briefly described the most interesting thermochemical cycles, focusing on thermochemical cycles based on oxides. (Author) 25 refs.

Bibliographic Review about Solar Hydrogen Production Through Thermochemical Cycles; Revision Bibliografica sobre la Produccion de Hidrogeno Solar Mediante Ciclos Termoquimicos

Energy Technology Data Exchange (ETDEWEB)

Fernandez Saavedra, R.

2008-08-06

This report presents a summary of the different thermical processes used to obtain hydrogen through solar energy, paying more attention to the production of hydrogen from water through thermochemical cycles. In this aspect, it is briefly y described the most interesting thermochemical cycles, focusing on thermochemical cycles based on oxides. (Author) 25 refs.

Bibliographic Review about Solar Hydrogen Production Through Thermochemical Cycles

International Nuclear Information System (INIS)

Fernandez Saavedra, R.

2007-01-01

This report presents a summary of the different thermical processes used to obtain hydrogen through solar energy, paying more attention to the production of hydrogen from water through thermochemical cycles. In this aspect, it is briefly described the most interesting thermochemical cycles, focusing on thermochemical cycles based on oxides. (Author) 25 refs

Harm reduction principles for healthcare settings

Directory of Open Access Journals (Sweden)

Mary Hawk

2017-10-01

Full Text Available Abstract Background Harm reduction refers to interventions aimed at reducing the negative effects of health behaviors without necessarily extinguishing the problematic health behaviors completely. The vast majority of the harm reduction literature focuses on the harms of drug use and on specific harm reduction strategies, such as syringe exchange, rather than on the harm reduction philosophy as a whole. Given that a harm reduction approach can address other risk behaviors that often occur alongside drug use and that harm reduction principles have been applied to harms such as sex work, eating disorders, and tobacco use, a natural evolution of the harm reduction philosophy is to extend it to other health risk behaviors and to a broader healthcare audience. Methods Building on the extant literature, we used data from in-depth qualitative interviews with 23 patients and 17 staff members from an HIV clinic in the USA to describe harm reduction principles for use in healthcare settings. Results We defined six principles of harm reduction and generalized them for use in healthcare settings with patients beyond those who use illicit substances. The principles include humanism, pragmatism, individualism, autonomy, incrementalism, and accountability without termination. For each of these principles, we present a definition, a description of how healthcare providers can deliver interventions informed by the principle, and examples of how each principle may be applied in the healthcare setting. Conclusion This paper is one of the firsts to provide a comprehensive set of principles for universal harm reduction as a conceptual approach for healthcare provision. Applying harm reduction principles in healthcare settings may improve clinical care outcomes given that the quality of the provider-patient relationship is known to impact health outcomes and treatment adherence. Harm reduction can be a universal precaution applied to all individuals regardless of

Harm reduction principles for healthcare settings.

Science.gov (United States)

Hawk, Mary; Coulter, Robert W S; Egan, James E; Fisk, Stuart; Reuel Friedman, M; Tula, Monique; Kinsky, Suzanne

2017-10-24

Harm reduction refers to interventions aimed at reducing the negative effects of health behaviors without necessarily extinguishing the problematic health behaviors completely. The vast majority of the harm reduction literature focuses on the harms of drug use and on specific harm reduction strategies, such as syringe exchange, rather than on the harm reduction philosophy as a whole. Given that a harm reduction approach can address other risk behaviors that often occur alongside drug use and that harm reduction principles have been applied to harms such as sex work, eating disorders, and tobacco use, a natural evolution of the harm reduction philosophy is to extend it to other health risk behaviors and to a broader healthcare audience. Building on the extant literature, we used data from in-depth qualitative interviews with 23 patients and 17 staff members from an HIV clinic in the USA to describe harm reduction principles for use in healthcare settings. We defined six principles of harm reduction and generalized them for use in healthcare settings with patients beyond those who use illicit substances. The principles include humanism, pragmatism, individualism, autonomy, incrementalism, and accountability without termination. For each of these principles, we present a definition, a description of how healthcare providers can deliver interventions informed by the principle, and examples of how each principle may be applied in the healthcare setting. This paper is one of the firsts to provide a comprehensive set of principles for universal harm reduction as a conceptual approach for healthcare provision. Applying harm reduction principles in healthcare settings may improve clinical care outcomes given that the quality of the provider-patient relationship is known to impact health outcomes and treatment adherence. Harm reduction can be a universal precaution applied to all individuals regardless of their disclosure of negative health behaviors, given that health

ITHNA.SYS: An Integrated Thermal Hydraulic and Neutronic Analyzer SYStem for NUR research reactor

Energy Technology Data Exchange (ETDEWEB)

Mazidi, S., E-mail: samirmazidi@gmail.com [Division Physique et Applications Nucléaires, Centre de Recherche Nucléaire de Draria (CRND), BP 43 Sebala, Draria, Alger (Algeria); Meftah, B., E-mail: b_meftah@yahoo.com [Division Physique et Applications Nucléaires, Centre de Recherche Nucléaire de Draria (CRND), BP 43 Sebala, Draria, Alger (Algeria); Belgaid, M., E-mail: belgaidm@yahoo.com [Faculté de Physique, Université Houari Boumediene, USTHB, BP 31, Bab Ezzouar, Alger (Algeria); Letaim, F., E-mail: fletaim@yahoo.fr [Faculté des Sciences et Technologies, Université d’El-oued, PO Box 789, El-oued (Algeria); Halilou, A., E-mail: hal_rane@yahoo.fr [Division Réacteur NUR, Centre de Recherche Nucléaire de Draria, BP 43 Sebala, Draria, Alger (Algeria)

2015-08-15

Highlights: • We develop a neutronic and thermal hydraulic MTR reactor analyzer. • The analyzer allows a rapid determination of the reactor core parameters. • Some NUR reactor parameters have been analyzed. - Abstract: This paper introduces the Integrated Thermal Hydraulic and Neutronic Analyzer SYStem (ITHNA.SYS) that has been developed for the Algerian research reactor NUR. It is used both as an operating aid tool and as a core physics engineering analysis tool. The system embeds three modules of the MTR-PC software package developed by INVAP SE: the cell calculation code WIMSD, the core calculation code CITVAP and the program TERMIC for thermal hydraulic analysis of a material testing reactor (MTR) core in forced convection. ITHNA.SYS operates both in on-line and off-line modes. In the on-line mode, the system is linked, via the computer parallel port, to the data acquisition console of the reactor control room and allows a real time monitoring of major physical and safety parameters of the NUR core. PC-based ITHNA.SYS provides a viable and convenient way of using an accumulated and often complex reactor physics stock of knowledge and frees the user from the intricacy of adequate reactor core modeling. This guaranties an accurate, though rapid, determination of a variety of neutronic and thermal hydraulic parameters of importance for the operation and safety analysis of the NUR research reactor. Instead of the several hours usually required, the processing time for the determination of such parameters is now reduced to few seconds. Validation of the system was performed with respect to experimental measurements and to calculations using reference codes. ITHNA.SYS can be easily adapted to accommodate other kinds of MTR reactors.

Contributions of myofascial pain in diagnosis and treatment of shoulder pain. A randomized control trial

Directory of Open Access Journals (Sweden)

Gaspar-Calvo Elena

2009-07-01

Full Text Available Abstract Background Rotator cuff tendinopathy and subacromial impingement syndrome present complex patomechanical situations, frequent difficulties in clinical diagnosis and lack of effectiveness in treatment. Based on clinical experience, we have therefore considered the existence of another pathological entity as the possible origin of pain and dysfunction. The hypothesis of this study is to relate subacromial impingement syndrome (SIS with myofascial pain syndrome (MPS, since myofascial trigger points (MTrPs cause pain, functional limitation, lack of coordination and alterations in quality of movement, even prior to a tendinopathy. MTrPs can coexist with any degenerative subacromial condition. If they are not taken into consideration, they could perpetuate and aggravate the problem, hindering diagnosis and making the applied treatments ineffective. The aims and methods of this study are related with providing evidence of the relationship that may exist between this condition and MPS in the diagnosis and treatment of rotator cuff tendonitis and/or SIS. Method/design A descriptive transversal study will be made to find the correlation between the diagnosis of SIS and rotator cuff tendonitis, positive provocation test responses, the existence of active MTrPs and the results obtained with ultrasonography (US and Magnetic Renonance Imaging (MRI. A randomized double blinded clinical trial will be carried out in experimental conditions: A Protocolized treatment based on active and passive joint repositioning, stabilization exercises, stretching of the periarticular shoulder muscles and postural reeducation. B. The previously described protocolized treatment, with the addition of dry needling applied to active MTrPs with the purpose of isolating the efficacy of dry needling in treatment. Discussion This study aims to provide a new vision of shoulder pain, from the perspective of MPS. This syndrome can, by itself, account for shoulder pain and

Chromate (CrO2-4) Reduction in Groundwaters by Using Reductive Bacteria in Fixed-Bed Bioreactors

International Nuclear Information System (INIS)

Battaglia-Brunet, F.; Foucher, S.; Morin, D.; Ignatiadis, I.

2004-01-01

A biological method for the reduction Cr(VI), using sulphate-reducing bacteria (SRB), was tested in 2-L then 20-L fixed-bed reactors, with H 2 as a low-cost and clean substrate. The systems were inoculated with Desulfomicrobium norvegicum, that proved to be particularly efficient for direct Cr(VI) enzymatic reduction. The bacterial reduction was efficient when some SO 2- 4 was provided in the feeding, in order to allow their growth and to combine the direct enzymatic reduction to the indirect chemical reduction by dissolved H 2 S. The Cr(VI)/SO 2- 4 , ratio in the influent was adjusted in order to avoid excess sulphide production. A real polluted groundwater and an industrial electroplating effluent were treated in the 20-L pilot plant

Quantum theory without reduction

International Nuclear Information System (INIS)

Cini, Marcello; Levy-Leblond, J.-M.

1990-01-01

Quantum theory offers a strange, and perhaps unique, case in the history of science. Although research into its roots has provided important results in recent years, the debate goes on. Some theorists argue that quantum theory is weakened by the inclusion of the so called 'reduction of the state vector' in its foundations. Quantum Theory without Reduction presents arguments in favour of quantum theory as a consistent and complete theory without this reduction, and which is capable of explaining all known features of the measurement problem. This collection of invited contributions defines and explores different aspects of this issue, bringing an old debate into a new perspective, and leading to a more satisfying consensus about quantum theory. (author)

Operational and research activities of Tsing Hua open pool reactor

International Nuclear Information System (INIS)

Wang, T.-K.; Tseng, D.-L.; Chou, H.-P.; Onyang Minsun

1988-01-01

Tsing Hua Open Pool Reaction (THOR) is the first nuclear reactor to become operational in Taiwan. It reached its first critical on April 13, 1961. Until now, THOR has been operated successfully for 27 years. The major missions of THOR include radioisotope production, neutron activation analysis, nuclear science and engineering researches, education, and personnel training. The THOR was originally loaded with HEU MTR-type fuels. A gradual fuel replacing program using LEU TRIGA fuel to replace MTR started in 1977. By 1987, THOR was loaded with all TRIGA fuels. This paper gives a brief history of THOR, its current status, the core conversion work, some selected research topics, and its improvement plan. (author)

Novel maturity parameters for mature to over-mature source rocks and oils based on the distribution of phenanthrene series compounds

Directory of Open Access Journals (Sweden)

Zixiang Wang

2016-03-01

Two additional novel and an optimized maturation parameters based on the distribution of phenanthrene series compounds are proposed and their relationships to EasyRo% (x are established: log(MPs/P = 0.19x + 0.08 (0.9% < EasyRo% < 2.1%; log(MPs/P = 0.64x − 0.86 (2.1% < EasyRo% < 3.4%; log(DMPs/TMPs = 0.71x − 0.55 (0.9% < EasyRo% < 3.4%; log(MTR = 0.84x − 0.75 (0.9% < EasyRo% < 3.4%. These significant positive correlations are strong argument for using log(MPs/P, log(DMPs/TMPs and log(MTR as maturity parameters, especially for mature to over-mature source rocks.

Prevention of criticality accidents. Fuel elements storage; Prevencion de accidentes de criticidad. Almacenamiento de elementos combustibles

Energy Technology Data Exchange (ETDEWEB)

Canavese, S I; Capadona, N M

1991-12-31

Before the need to store fuel elements of the plate type MTR (Materials Testing Reactors), produced with enriched uranium at 20% in U235 for research reactors, it requires the design of a deposit for this purpose, which will give intrinsic security at a great extent and no complaints regarding its construction, is required. (Author). [Espanol] Partiendo de la necesidad de almacenar elementos combustibles tipo placa MTR (Materials Testing Reactors), producidos con uranio enriquecido al 20% en U235 para reactores de investigacion, se requiere el diseno de un deposito para tal fin que brinde esencialmente un alto grado de seguridad intrinseca y que no ofrezca complicaciones en cuanto a su construccion. (Autor).

From Outermost Reduction Semantics to Abstract Machine

DEFF Research Database (Denmark)

Danvy, Olivier; Johannsen, Jacob

to transform a reduction-based normalization function into a reduction-free one where the reduction sequence is not enumerated. This reduction-free normalization function takes the form of an abstract machine that navigates from one redex site to the next without systematically detouring via the root...... of a redex. In this article, we consider such an outermost reduction semantics with backward-overlapping rules, and we investigate how to apply refocusing to still obtain a reduction-free normalization function in the form of an abstract machine....

Fabrication of a micro-porous Ti–Zr alloy by electroless reduction with a calcium reductant for electrolytic capacitor applications

International Nuclear Information System (INIS)

Kikuchi, Tatsuya; Yoshida, Masumi; Taguchi, Yoshiaki; Habazaki, Hiroki; Suzuki, Ryosuke O.

2014-01-01

Highlights: • A metallic Ti–Zr alloy was obtained by electroless reduction for capacitor applications. • The reduction mechanisms were studied by SEM, XRD, EPMA, and an oxygen analyzer. • The alloy was obtained by electroless reduction in the presence of excess calcium reductant. • A micro-porous Ti–Zr alloy was successfully obtained. • The alloy has a low oxygen content and a large surface area. -- Abstract: A metallic titanium and zirconium micro-porous alloy for electrolytic capacitor applications was produced by electroless reduction with a calcium reductant in calcium chloride molten salt at 1173 K. Mixed TiO 2 –70 at%ZrO 2 oxides, metallic calcium, and calcium chloride were placed in a titanium crucible and heated under argon atmosphere to reduce the oxides with the calcium reductant. A metallic Ti–Zr alloy was obtained by electroless reduction in the presence of excess calcium reductant and showed a micro-porous morphology due to the sintering of each of the reduced particles during the reduction. The residual oxygen content and surface area of the reduced Ti–Zr alloy decreased over time during the electroless reduction. The element distributions were slightly different at the positions of the alloy and were in the composition range of Ti-69.3 at% to 74.3 at%Zr. A micro-porous Ti–Zr alloy with low oxygen content (0.20 wt%) and large surface area (0.55 m 2 g −1 ) was successfully fabricated by electroless reduction under optimal conditions. The reduction mechanisms of the mixed and pure oxides by the calcium reductant are also discussed

Macroscopical morphology of deterioration of the stone in the cathedral of Guadíx/Spain

Directory of Open Access Journals (Sweden)

Alcalde, M.

1991-12-01

Full Text Available The main factors of deterioration that affect the Cathedral of Guadíx are of a natural origin, basically thermic and hydraulic, due to its great oscillations in temperature in Summer, the frequency of frosts in Winter and the rains. The lithotypes employed are mainly calcarenite of mean porosite and slightly more compact limestones from the quarries in the area, and marbles. The corresponding deterioration mechanisms are those of differential thermic dilatations caused by thermic jumps, especially in the more compact stones, those of increase in volume in capillaries and interstices, especially by freezing, and those of dissolution. The most serious deterioration indicators are fissures and spalling that affect the most carved elements and which have taken the greater part of the most aerated elements such as the pinnacles to a state to ruin.

Los principales factores de alteración que afectan a la catedral de Guadix son de origen natural, fundamentalmente térmico e hidráulico, por sus grandes oscilaciones de temperatura en verano y por la frecuencia de heladas en invierno, y por la lluvias. Los litotipos empleados son principalmente calcarenitas de porosidad media y calizas algo más compactas, procedentes de canteras de la zona, y mármoles. Los mecanismos de alteración correspondientes son los de dilatación térmica diferencial originados por los saltos térmicos, en especial en las piedras más compactas, los de incremento de volumen en capilares e intersticios, sobre todo por heladicidad, y los de disolución. Los indicadores de alteración más graves son las fisuras y fragmentaciones que afectan a los elementos más labrados y que han llevado al estado de ruina a la mayor parte de los elementos más aireados como los pináculos.

Harm reduction-the cannabis paradox

Directory of Open Access Journals (Sweden)

Melamede Robert

2005-09-01

Full Text Available Abstract This article examines harm reduction from a novel perspective. Its central thesis is that harm reduction is not only a social concept, but also a biological one. More specifically, evolution does not make moral distinctions in the selection process, but utilizes a cannabis-based approach to harm reduction in order to promote survival of the fittest. Evidence will be provided from peer-reviewed scientific literature that supports the hypothesis that humans, and all animals, make and use internally produced cannabis-like products (endocannabinoids as part of the evolutionary harm reduction program. More specifically, endocannabinoids homeostatically regulate all body systems (cardiovascular, digestive, endocrine, excretory, immune, nervous, musculo-skeletal, reproductive. Therefore, the health of each individual is dependant on this system working appropriately.

A Virtual Aluminum Reduction Cell

Science.gov (United States)

Zhang, Hongliang; Zhou, Chenn Q.; Wu, Bing; Li, Jie

2013-11-01

The most important component in the aluminum industry is the aluminum reduction cell; it has received considerable interests and resources to conduct research to improve its productivity and energy efficiency. The current study focused on the integration of numerical simulation data and virtual reality technology to create a scientifically and practically realistic virtual aluminum reduction cell by presenting complex cell structures and physical-chemical phenomena. The multiphysical field simulation models were first built and solved in ANSYS software (ANSYS Inc., Canonsburg, PA, USA). Then, the methodology of combining the simulation results with virtual reality was introduced, and a virtual aluminum reduction cell was created. The demonstration showed that a computer-based world could be created in which people who are not analysis experts can see the detailed cell structure in a context that they can understand easily. With the application of the virtual aluminum reduction cell, even people who are familiar with aluminum reduction cell operations can gain insights that make it possible to understand the root causes of observed problems and plan design changes in much less time.

Does Deep Cervical Flexor Muscle Training Affect Pain Pressure Thresholds of Myofascial Trigger Points in Patients with Chronic Neck Pain? A Prospective Randomized Controlled Trial

Directory of Open Access Journals (Sweden)

Pavlos Bobos

2016-01-01

Full Text Available Background. We need to understand more about how DNF performs in different contexts and whether it affects the pain threshold over myofascial trigger points (MTrPs. Purpose. The objectives were to investigate the effect of neck muscles training on disability and pain and on pain threshold over MTrPs in people with chronic neck pain. Methods. Patients with chronic neck pain were eligible for participation with a Neck Disability Index (NDI score of over 5/50 and having at least one MTrP on either levator scapulae, upper trapezoid, or splenius capitis muscle. Patients were randomly assigned into either DNF training, superficial neck muscle exercise, or advice group. Generalized linear model (GLM was used to detect differences in treatment groups over time. Results. Out of 67 participants, 60 (47 females, mean age: 39.45 ± 12.67 completed the study. Neck disability and neck pain were improved over time between and within groups (p<0.05. However, no differences were found within and between the therapeutic groups (p<0.05 in the tested muscles’ PPTs and in cervicothoracic angle over a 7-week period. Conclusion. All three groups improved over time. This infers that the pain pathways involved in the neck pain relief are not those involved in pain threshold.

Integrity assessment of research reactor fuel cladding and material testing using eddy current inspection; Avaliacao de integridade de revestimentos de combustiveis de reatores de pesquisa e teste de materiais utilizando o ensaio de correntes parasitas

Energy Technology Data Exchange (ETDEWEB)

Alencar, Donizete Anderson de

2004-07-01

A methodology to perform the integrity assessment of research reactors nuclear fuels cladding, such as those installed in IPR-Rl (TRIGA) and IEA-R1 (MTR), using nondestructive electromagnetic inspection (eddy current) is presented. This methodology is constituted by: the development of calibration reference standards, specific for each type of fuel; the development of special test probes; the recommendations for the inspection equipment calibration; the construction of voltage based evaluation curves and the inspection procedures developed for the characterization of detected flaws. The test probes development, specially those designed for the inspection of MTR fuels cladding, which present access difficulties due to the narrow gap between fuel plates (2,89 mm for IEAR-R1), constituted a challenge that demanded the introduction of unusual materials and constructive techniques. The operational performance of the developed resources, as well as the special operative characteristics of the test probes, such as their immunity to adjacent fuel plates interference and electrical resistivity changes of the fuels meat are experimentally demonstrated. The practical applicability of the developed methodology is verified in non radioactive environment, using a dummy MTR fuel element model, similar to an IEA-R1 reactor fuel element, produced and installed in IPEN, Sao Paulo. The efficacy of the proposed methodology was verified by the achieved results. (author)

Protocol: Testing the Relevance of Acupuncture Theory in the Treatment of Myofascial Pain in the Upper Trapezius Muscle.

Science.gov (United States)

Elsdon, Dale S; Spanswick, Selina; Zaslawski, Chris; Meier, Peter C

2017-01-01

A protocol for a prospective single-blind parallel four-arm randomized placebo-controlled trial with repeated measures was designed to test the effects of various acupuncture methods compared with sham. Eighty self-selected participants with myofascial pain in the upper trapezius muscle were randomized into four groups. Group 1 received acupuncture to a myofascial trigger point (MTrP) in the upper trapezius. Group 2 received acupuncture to the MTrP in addition to relevant distal points. Group 3 received acupuncture to the relevant distal points only. Group 4 received a sham treatment to both the MTrP and distal points using a deactivated acupuncture laser device. Treatment was applied four times within 2 weeks with outcomes measured throughout the trial and at 2 weeks and 4 weeks posttreatment. Outcome measurements were a 100-mm visual analog pain scale, SF-36, pressure pain threshold, Neck Disability Index, the Upper Extremity Functional Index, lateral flexion in the neck, McGill Pain Questionnaire, Massachusetts General Hospital Acupuncture Sensation Scale, Working Alliance Inventory (short form), and the Credibility Expectance Questionnaire. Two-way analysis of variance (ANOVA) with repeated measures were used to assess the differences between groups. Copyright © 2017 Medical Association of Pharmacopuncture Institute. Published by Elsevier B.V. All rights reserved.

Integrity assessment of research reactor fuel cladding and material testing using eddy current inspection

International Nuclear Information System (INIS)

Alencar, Donizete Anderson de

2004-01-01

A methodology to perform the integrity assessment of research reactors nuclear fuels cladding, such as those installed in IPR-Rl (TRIGA) and IEA-R1 (MTR), using nondestructive electromagnetic inspection (eddy current) is presented. This methodology is constituted by: the development of calibration reference standards, specific for each type of fuel; the development of special test probes; the recommendations for the inspection equipment calibration; the construction of voltage based evaluation curves and the inspection procedures developed for the characterization of detected flaws. The test probes development, specially those designed for the inspection of MTR fuels cladding, which present access difficulties due to the narrow gap between fuel plates (2,89 mm for IEAR-R1), constituted a challenge that demanded the introduction of unusual materials and constructive techniques. The operational performance of the developed resources, as well as the special operative characteristics of the test probes, such as their immunity to adjacent fuel plates interference and electrical resistivity changes of the fuels meat are experimentally demonstrated. The practical applicability of the developed methodology is verified in non radioactive environment, using a dummy MTR fuel element model, similar to an IEA-R1 reactor fuel element, produced and installed in IPEN, Sao Paulo. The efficacy of the proposed methodology was verified by the achieved results. (author)

Evaluation of magnetization transfer ratio in ascites and pelvic cystic masses

Energy Technology Data Exchange (ETDEWEB)

Okada, Susumu [Nippon Medical School, Inba, Chiba (Japan). Chiba-Hokuso Hospital; Kato, Tomoyasu; Yamashita, Takashi [and others

1997-12-01

To investigate the feasibility of magnetization transfer contrast (MTC) in characterization of pelvic cystic masses and ascites, in vitro studies were performed. Cystic fluids were taken from operative specimens of ten ovarian cystic masses (five mucinous cystadenomas, one cystadenocarcinoma, two serous cystadenocarcinomas, two clear cell carcinomas) and three non-ovarian pelvic cysts (one paraovarian cyst, one pseudomyxoma peritonei, one pelvic abscess). Samples of ascitic flied were drawn by peritoneal puncture in twenty patients (thirteen with peritonitis carcinomatosa, five with liver dysfunction, two with renal dysfunction). Total protein content in ascitic fluids was measured. Magnetization transfer ratio (MTR) was calculated by the signal intensities under the gradient echo sequence with and without the application of off-resonance pulses. The relative signal intensities (RSI) relative to water in T{sub 1} and T{sub 2} weighted images were obtained using spin echo sequence. There was no correlation between histological type of pelvic mass and MTR and RSI. Good correlation (R{sup 2}=0.761) was obtained between MTR and protein content in ascitic fluids, whereas no correlation was noted between RSI and protein content in ascitic fluids. These results suggest that MTC is not useful in the characterization of pelvic masses but is applicable in the differentiation between exudative ascites and transudative ascites. (author)

Microstructural characterization and finite element modeling of AZ31 magnesium alloys welded joints

Directory of Open Access Journals (Sweden)

José A. Segarra

2018-03-01

Full Text Available In this article, it has been studied how the microstructure of AZ31 magnesium alloy can be affected by the thermic cycles produced by welding processes, trying to modeling by element finite software the thermic cycles in this material. The AZ31 samples tested were welded using Gas Tugsten Arc Welding (GTAW and different filler materials. For this investigation, optic microscopy, scanning electronic microscopy, and finite elements method software has been used. This work indicates in one hand that in this type of alloys the microconstituyentes are Al-Mn o Al-Mn-Mg compounds, the presence of β-phase cannot be found at room temperature in this research at room, on the other hand the obtained simulation models indicate that the recrystallization takes place in the areas which reach maximum temperatures around 550 °C, this value is also the limit of the dissolution area for the Al-Mn o Al-Mn-Mg precipitated particles which are very likely to act as inhibitors of the corrosion in NaCl electrolytes.

The effects of a low-fat, plant-based dietary intervention on body weight, metabolism, and insulin sensitivity.

Science.gov (United States)

Barnard, Neal D; Scialli, Anthony R; Turner-McGrievy, Gabrielle; Lanou, Amy J; Glass, Jolie

2005-09-01

This study investigated the effect of a low-fat, plant-based diet on body weight, metabolism, and insulin sensitivity, while controlling for exercise in free-living individuals. In an outpatient setting, 64 overweight, postmenopausal women were randomly assigned to a low-fat, vegan diet or a control diet based on National Cholesterol Education Program guidelines, without energy intake limits, and were asked to maintain exercise unchanged. Dietary intake, body weight and composition, resting metabolic rate, thermic effect of food, and insulin sensitivity were measured at baseline and 14 weeks. Mean +/- standard deviation intervention-group body weight decreased 5.8 +/- 3.2 kg, compared with 3.8 +/- 2.8 kg in the control group (P = .012). In a regression model of predictors of weight change, including diet group and changes in energy intake, thermic effect of food, resting metabolic rate, and reported energy expenditure, significant effects were found for diet group (P effect of food (P vegan diet was associated with significant weight loss in overweight postmenopausal women, despite the absence of prescribed limits on portion size or energy intake.

INEL waste reduction: summary paper

International Nuclear Information System (INIS)

Rhoades, W.A.

1987-01-01

The Idaho National Engineering Laboratory (INEL) is a Department of Energy (DOE) facility located in southeastern Idaho. Located at the INEL are a Waste Experimental Reduction Facility (WERF) which processes low level radioactive waste (LLW) materials and a Radioactive Waste Management Complex (RWMC) which provides for disposal of radioactive waste materials. There are currently 9 active facilities (waste generators) at the INEL which produce an average total volume of about 5000 cubic meters of solid LLW annually. This boxed or bulk waste is ultimately disposed of at the RWMC Subsurface Disposal Area (SDA). The SDA is currently the only active LLW disposal site at the INEL, and the prospects for opening another shallow land burial disposal facility are uncertain. Therefore, it has become imperative that EG and G Idaho Waste Management Department make every reasonable effort to extend the disposal life of the SDA. Among Waste Management Department's principal efforts to extend the SDA disposal life are operation of the Waste Experimental Reduction Facility (WERF) and administration of the INEL Waste Reduction Program. The INEL Waste Reduction Program is charged with providing assistance to all INEL facilities in reducing LLW generation rates to the lowest practical levels while at the same time encouraging optimum utilization of the volume reduction capabilities of WERF. Both waste volume and waste generation reductions are discussed

BARIUM REDUCTION OF INTUSSUSCEPTION IN INFANCY

Science.gov (United States)

Denenholz, Edward J.; Feher, George. S.

1955-01-01

Barium enema reduction was used as the initial routine treatment in 29 infants with intussusception. In 22 of them the intussusception was reduced by this means. In three of eight patients operated upon the intussusception was found to be reduced. Four of the remaining five patients had clinical or x-ray evidence of complications before reduction by barium enema was attempted. Twenty-one of the patients, all of whom were observed in private practice, were treated without admission to the hospital. After reduction, these patients were observed closely by the clinician. None of these patients showed clinical or x-ray signs of complications before reduction. Certain clinical and roentgen criteria must be satisfied before it can be concluded that reduction by barium enema is complete. If there are clinical signs of complications with x-ray evidence of small bowel obstruction, only a very cautious attempt at hydrostatic reduction should be made. As the time factor is generally a reliable clinical guide to reducibility, the late cases should be viewed with greater caution. Long duration of symptoms, however, is not per se a contraindication to an attempt at hydrostatic reduction. PMID:13230908

Safe reduction rules for weighted treewidth

NARCIS (Netherlands)

Eijkhof, F. van den; Bodlaender, H.L.; Koster, A.M.C.A.

2002-01-01

Several sets of reductions rules are known for preprocessing a graph when computing its treewidth. In this paper, we give reduction rules for a weighted variant of treewidth, motivated by the analysis of algorithms for probabilistic networks. We present two general reduction rules that are safe for

Measuring mandibular ridge reduction

International Nuclear Information System (INIS)

Steen, W.H.A.

1984-01-01

This thesis investigates the mandibular reduction in height of complete denture wearers and overdenture wearers. To follow this reduction in the anterior region as well as in the lateral sections of the mandible, an accurate and reproducible measuring method is a prerequisite. A radiologic technique offers the best chance. A survey is given of the literature concerning the resorption process after the extraction of teeth. An oblique cephalometric radiographic technique is introduced as a promising method to measure mandibular ridge reduction. The reproducibility and the accuracy of the technique are determined. The reproducibility in the positioning of the mandible is improved by the introduction of a mandibular support which permits a precise repositioning of the edentulous jaw, even after long periods of investigation. (Auth.)

Robust methods for data reduction

CERN Document Server

Farcomeni, Alessio

2015-01-01

Robust Methods for Data Reduction gives a non-technical overview of robust data reduction techniques, encouraging the use of these important and useful methods in practical applications. The main areas covered include principal components analysis, sparse principal component analysis, canonical correlation analysis, factor analysis, clustering, double clustering, and discriminant analysis.The first part of the book illustrates how dimension reduction techniques synthesize available information by reducing the dimensionality of the data. The second part focuses on cluster and discriminant analy

Reductions in Perceived Injustice are Associated With Reductions in Disability and Depressive Symptoms After Total Knee Arthroplasty.

Science.gov (United States)

Yakobov, Esther; Scott, Whitney; Stanish, William D; Tanzer, Michael; Dunbar, Michael; Richardson, Glen; Sullivan, Michael J L

2018-05-01

Perceptions of injustice have been associated with problematic recovery outcomes in individuals with a wide range of debilitating pain conditions. It has been suggested that, in patients with chronic pain, perceptions of injustice might arise in response to experiences characterized by illness-related pain severity, depressive symptoms, and disability. If symptoms severity and disability are important contributors to perceived injustice (PI), it follows that interventions that yield reductions in symptom severity and disability should also contribute to reductions in perceptions of injustice. The present study examined the relative contributions of postsurgical reductions in pain severity, depressive symptoms, and disability to the prediction of reductions in perceptions of injustice. The study sample consisted of 110 individuals (69 women and 41 men) with osteoarthritis of the knee scheduled for total knee arthroplasty (TKA). Patients completed measures of perceived injustice, depressive symptoms, pain, and disability at their presurgical evaluation, and at 1-year follow-up. The results revealed that reductions in depressive symptoms and disability, but not pain severity, were correlated with reductions in perceived injustice. Regression analyses revealed that reductions in disability and reductions in depressive symptoms contributed modest but significant unique variance to the prediction of postsurgical reductions in perceived injustice. The present findings are consistent with current conceptualizations of injustice appraisals that propose a central role for symptom severity and disability as determinants of perceptions of injustice in patients with persistent pain. The results suggest that the inclusion of psychosocial interventions that target depressive symptoms and perceived injustice might augment the impact of rehabilitation programs made available for individuals recovering from TKA.

HAMLET -Human Model MATROSHKA for Radiation Exposure Determination of Astronauts -Current status and results

Science.gov (United States)

Reitz, Guenther; Berger, Thomas; Bilski, Pawel; Burmeister, Soenke; Labrenz, Johannes; Hager, Luke; Palfalvi, Jozsef K.; Hajek, Michael; Puchalska, Monika; Sihver, Lembit

The exploration of space as seen in specific projects from the European Space Agency (ESA) acts as groundwork for human long duration space missions. One of the main constraints for long duration human missions is radiation. The radiation load on astronauts and cosmonauts in space (as for the ISS) is a factor of 100 higher than the natural radiation on Earth and will further increase should humans travel to Mars. In preparation for long duration space missions it is important to evaluate the impact of space radiation in order to secure the safety of the astronauts and minimize their radiation risks. To determine the radiation risk on humans one has to measure the radiation doses to radiosensitive organs within the human body. One way to approach this is the ESA facility MATROSHKA (MTR), under the scientific and project lead of DLR. It is dedicated to determining the radiation load on astronauts within and outside the International Space Station (ISS), and was launched in January 2004. MTR is currently preparing for its fourth experimental phase inside the Japanese Experimental Module (JEM) in summer 2010. MTR, which mimics a human head and torso, is an anthropomorphic phantom containing over 6000 radiation detectors to determine the depth dose and organ dose distribution in the body. It is the largest international research initiative ever performed in the field of space dosimetry and combines the expertise of leading research institutions around the world, thereby generating a huge pool of data of potentially immense value for research. Aiming at optimal scientific exploitation, the FP7 project HAMLET aims to process and compile the data acquired individually by the participating laboratories of the MATROSHKA experiment. Based on experimental input from the MATROSHKA experiment phases as well as on radiation transport calculations, a three-dimensional model for the distribution of radiation dose in an astronaut's body will be built up. The scientific achievements

Consumer's Guide to Radon Reduction

Science.gov (United States)

... Labs and Research Centers Radon Contact Us Share Consumer's Guide to Radon Reduction: How to Fix Your ... See EPA’s About PDF page to learn more. Consumer's Guide to Radon Reduction: How to Fix Your ...

The effect of sodium hydroxide on drag reduction using banana peel as a drag reduction agent

Science.gov (United States)

Kaur, H.; Jaafar, A.

2018-02-01

Drag reduction is observed as reduced frictional pressure losses under turbulent flow conditions. Drag reduction agent such as polymers can be introduced to increase the flowrate of water flowing and reduce the water accumulation in the system. Currently used polymers are synthetic polymers, which will harm our environment in excessive use of accumulation. A more environmentally-friendly drag reduction agent such as the polymer derived from natural sources or biopolymer, is then required for such purpose. As opposed to the synthetic polymers, the potential of biopolymers as drag reduction agents, especially those derived from a local plant source are not extensively explored. The drag reduction of a polymer produced from a local plant source within the turbulent regime was explored and assessed in this study using a rheometer, where a reduced a torque produced was perceived as a reduction of drag. This method proposed is less time consuming and is more practical which is producing carboxymethylcellulose from the banana peel. The cellulose powder was converted to carboxymethylcellulose (CMC) by etherification process. The carboxymethylation reaction during the synthesizing process was then optimized against the reaction temperature, reaction time and solubility. The biopolymers were then rheologically characterized, where the viscoelastic effects and the normal stresses produced by these biopolymers were utilized to further relate and explain the drag reduction phenomena. The research was structured to focus on producing the biopolymer and to assess the drag reduction ability of the biopolymer produced. The rheological behavior of the biopolymers was then analyzed based on the ability of reducing drag. The results are intended to expand the currently extremely limited experimental database. Based on the results, the biopolymer works as a good DRA.

miR396 affects mycorrhization and root meristem activity in the legume Medicago truncatula.

Science.gov (United States)

Bazin, Jérémie; Khan, Ghazanfar Abbas; Combier, Jean-Philippe; Bustos-Sanmamed, Pilar; Debernardi, Juan Manuel; Rodriguez, Ramiro; Sorin, Céline; Palatnik, Javier; Hartmann, Caroline; Crespi, Martin; Lelandais-Brière, Christine

2013-06-01

The root system is crucial for acquisition of resources from the soil. In legumes, the efficiency of mineral and water uptake by the roots may be reinforced due to establishment of symbiotic relationships with mycorrhizal fungi and interactions with soil rhizobia. Here, we investigated the role of miR396 in regulating the architecture of the root system and in symbiotic interactions in the model legume Medicago truncatula. Analyses with promoter-GUS fusions suggested that the mtr-miR396a and miR396b genes are highly expressed in root tips, preferentially in the transition zone, and display distinct expression profiles during lateral root and nodule development. Transgenic roots of composite plants that over-express the miR396b precursor showed lower expression of six growth-regulating factor genes (MtGRF) and two bHLH79-like target genes, as well as reduced growth and mycorrhizal associations. miR396 inactivation by mimicry caused contrasting tendencies, with increased target expression, higher root biomass and more efficient colonization by arbuscular mycorrhizal fungi. In contrast to MtbHLH79, repression of three GRF targets by RNA interference severely impaired root growth. Early activation of mtr-miR396b, concomitant with post-transcriptional repression of MtGRF5 expression, was also observed in response to exogenous brassinosteroids. Growth limitation in miR396 over-expressing roots correlated with a reduction in cell-cycle gene expression and the number of dividing cells in the root apical meristem. These results link the miR396 network to the regulation of root growth and mycorrhizal associations in plants. © 2013 The Authors The Plant Journal © 2013 John Wiley & Sons Ltd.

Radiology residents' experience with intussusception reduction

International Nuclear Information System (INIS)

Bateni, Cyrus; Stein-Wexler, Rebecca; Wootton-Gorges, Sandra L.; Li, Chin-Shang

2011-01-01

Residents should be exposed to adequate procedural volume to act independently upon completion of training. Informal inquiry led us to question whether residents encounter enough intussusception reductions to become comfortable with the procedure. We sought to determine radiology residents' exposure to intussusception reductions, and whether their experiences vary by region or institution. U.S. radiology residency program directors were asked to encourage their residents to complete a 12-question online survey describing characteristics of their pediatric radiology department, experiences with intussusception reduction, and confidence in their own ability to perform the procedure. Six hundred sixty-four residents responded during the study period. Of those, 308 (46.4%) had not experienced an intussusception reduction, and 228 (34%) had experienced only one or two. Twenty-two percent of fourth-year residents had never experienced an intussusception reduction, and 21% had experienced only one. Among second- through fourth-year residents, only 99 (18.3%) felt confident that they could competently reduce an intussusception (P < 0.0001), and 336 (62.2%) thought they would benefit from a computer-assisted training model simulating intussusception reduction (P < 0.0001). Radiology residents have limited opportunity to learn intussusception reduction and therefore lack confidence. Most think they would benefit from additional training with a computer-simulation model. (orig.)

Les sources du Moyen Atlas et de Rif (Maroc): Faunistique (description de deux espèces nouvelles de Trichoptères), écologie, intérêt biogéographique

NARCIS (Netherlands)

Giudicelli, Jean; Dakki, Mohamed

1984-01-01

Seven springs in the Middle Atlas and five in the Rif have been studied. These show a great diversity of crenal habitats: water temperature ranges from 8.7° to 21°C, and the flow from 1 l/s to 1,800 l/s. Based on hydrologic and thermic characteristics, a spring typology is provided. The invertebrate

Study of diffusion type cold traps in liquid sodium circuit

International Nuclear Information System (INIS)

Araujo, F.G.B. de.

1974-01-01

The purpose of this thesis is to attain conclusions related with the work of the diffusion type cold traps. Primarily a mathematic formulation is established for a purification process, including the determination of the cold trap thermic field. With parameters obtained from the temperature field, purification characteristics were calculated allowing conclusions concerning the system's performance. (author)

Unfavourable results following reduction mammoplasty

Directory of Open Access Journals (Sweden)

Lakshmi Saleem

2013-01-01

Full Text Available Breast reduction is a common cosmetic surgical procedure. It aims not only at bringing down the size of the breast proportionate to the build of the individual, but also to overcome the discomfort caused by massive, ill-shaped and hanging breasts. The operative procedure has evolved from mere reduction of breast mass to enhanced aesthetic appeal with a minimum of scar load. The selection of technique needs to be individualised. Bilateral breast reduction is done most often. Haematoma, seroma, fat necrosis, skin loss, nipple loss and unsightly, painful scars can be the complications of any procedure on the breast. These may result from errors in judgement, wrong surgical plan and imprecise execution of the plan. Though a surfeit of studies are available on breast reduction, very few dwell upon its complications. The following article is a distillation of three decades of experience of the senior author (L.S. in reduction mammoplasty. An effort is made to understand the reasons for unfavourable results. To conclude, most complications can be overcome with proper selection of procedure for the given patient and with gentle tissue handling.

40 CFR 503.33 - Vector attraction reduction.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Vector attraction reduction. 503.33... STANDARDS FOR THE USE OR DISPOSAL OF SEWAGE SLUDGE Pathogens and Vector Attraction Reduction § 503.33 Vector attraction reduction. (a)(1) One of the vector attraction reduction requirements in § 503.33 (b)(1) through...

Confluence reduction for Markov automata

NARCIS (Netherlands)

Timmer, Mark; Katoen, Joost P.; van de Pol, Jaco; Stoelinga, Mariëlle Ida Antoinette

2016-01-01

Markov automata are a novel formalism for specifying systems exhibiting nondeterminism, probabilistic choices and Markovian rates. As expected, the state space explosion threatens the analysability of these models. We therefore introduce confluence reduction for Markov automata, a powerful reduction

REDUCTION CAPACITY OF SALTSTONE AND SALTSTONE COMPONENTS

Energy Technology Data Exchange (ETDEWEB)

Roberts, K.; Kaplan, D.

2009-11-30

The duration that saltstone retains its ability to immobilize some key radionuclides, such as technetium (Tc), plutonium (Pu), and neptunium (Np), depends on its capacity to maintain a low redox status (or low oxidation state). The reduction capacity is a measure of the mass of reductants present in the saltstone; the reductants are the active ingredients that immobilize Tc, Pu, and Np. Once reductants are exhausted, the saltstone loses its ability to immobilize these radionuclides. The reduction capacity values reported here are based on the Ce(IV)/Fe(II) system. The Portland cement (198 {micro}eq/g) and especially the fly ash (299 {micro}eq/g) had a measurable amount of reduction capacity, but the blast furnace slag (820 {micro}eq/g) not surprisingly accounted for most of the reduction capacity. The blast furnace slag contains ferrous iron and sulfides which are strong reducing and precipitating species for a large number of solids. Three saltstone samples containing 45% slag or one sample containing 90% slag had essentially the same reduction capacity as pure slag. There appears to be some critical concentration between 10% and 45% slag in the Saltstone formulation that is needed to create the maximum reduction capacity. Values from this work supported those previously reported, namely that the reduction capacity of SRS saltstone is about 820 {micro}eq/g; this value is recommended for estimating the longevity that the Saltstone Disposal Facility will retain its ability to immobilize radionuclides.

Reduction of chemical reaction models

Science.gov (United States)

Frenklach, Michael

1991-01-01

An attempt is made to reconcile the different terminologies pertaining to reduction of chemical reaction models. The approaches considered include global modeling, response modeling, detailed reduction, chemical lumping, and statistical lumping. The advantages and drawbacks of each of these methods are pointed out.

Confluence reduction for probabilistic systems

NARCIS (Netherlands)

Timmer, Mark; van de Pol, Jan Cornelis; Stoelinga, Mariëlle Ida Antoinette

In this presentation we introduce a novel technique for state space reduction of probabilistic specifications, based on a newly developed notion of confluence for probabilistic automata. We proved that this reduction preserves branching probabilistic bisimulation and can be applied on-the-fly. To

VOC reduction technology deveolpment as part of the U.S. Department of Energy, Industrial Waste Reduction Program

International Nuclear Information System (INIS)

Cranford, B.

1993-01-01

A strong industry is vital to U.S. Economic health and prosperity, but U.S. industry is facing serious challenges both domestically and internationally. One of these challenges is the reduction of volatile organic compounds emissions from industrial processes and products. To assist industry with these challenges, the U.S. Department of Energy established the Industrial Waste Reduction Program to improve energy efficiency and competitiveness to private industry through cost-effective waste material reduction. This paper describes the programs and the use of joint partnerships between the Department of Energy, industry, national laboratories, universities and others, in developing technologies which reduce VOC emissions while improving energy efficiency. This paper also describes the process and selection criteria for participation in the program, and briefly describes the following five VOC reduction technologies under development: Dual Cure Coatings, Solvent Reduction through use of a No-clean Soldering Process, Solvent Waste Minimization by Supercritical CO 2 Cleaning Process, ethanol Recovery Process, and Membrane Vapor Recovery Systems. The VOC reductions as well as the energy savings and other benefits to the U.S. are discussed

GumTree: Data reduction

Energy Technology Data Exchange (ETDEWEB)

Rayner, Hugh [Bragg Institute, Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)]. E-mail: hrz@ansto.gov.au; Hathaway, Paul [Bragg Institute, Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia); Hauser, Nick [Bragg Institute, Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia); Fei, Yang [Bragg Institute, Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia); Franceschini, Ferdi [Bragg Institute, Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia); Lam, Tony [Bragg Institute, Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

2006-11-15

Access to software tools for interactive data reduction, visualisation and analysis during a neutron scattering experiment enables instrument users to make informed decisions regarding the direction and success of their experiment. ANSTO aims to enhance the experiment experience of its facility's users by integrating these data reduction tools with the instrument control interface for immediate feedback. GumTree is a software framework and application designed to support an Integrated Scientific Experimental Environment, for concurrent access to instrument control, data acquisition, visualisation and analysis software. The Data Reduction and Analysis (DRA) module is a component of the GumTree framework that allows users to perform data reduction, correction and basic analysis within GumTree while an experiment is running. It is highly integrated with GumTree, able to pull experiment data and metadata directly from the instrument control and data acquisition components. The DRA itself uses components common to all instruments at the facility, providing a consistent interface. It features familiar ISAW-based 1D and 2D plotting, an OpenGL-based 3D plotter and peak fitting performed by fityk. This paper covers the benefits of integration, the flexibility of the DRA module, ease of use for the interface and audit trail generation.

GumTree: Data reduction

International Nuclear Information System (INIS)

Rayner, Hugh; Hathaway, Paul; Hauser, Nick; Fei, Yang; Franceschini, Ferdi; Lam, Tony

2006-01-01

Access to software tools for interactive data reduction, visualisation and analysis during a neutron scattering experiment enables instrument users to make informed decisions regarding the direction and success of their experiment. ANSTO aims to enhance the experiment experience of its facility's users by integrating these data reduction tools with the instrument control interface for immediate feedback. GumTree is a software framework and application designed to support an Integrated Scientific Experimental Environment, for concurrent access to instrument control, data acquisition, visualisation and analysis software. The Data Reduction and Analysis (DRA) module is a component of the GumTree framework that allows users to perform data reduction, correction and basic analysis within GumTree while an experiment is running. It is highly integrated with GumTree, able to pull experiment data and metadata directly from the instrument control and data acquisition components. The DRA itself uses components common to all instruments at the facility, providing a consistent interface. It features familiar ISAW-based 1D and 2D plotting, an OpenGL-based 3D plotter and peak fitting performed by fityk. This paper covers the benefits of integration, the flexibility of the DRA module, ease of use for the interface and audit trail generation

Casting light on harm reduction

DEFF Research Database (Denmark)

Jourdan, Michael

2009-01-01

Background: Harm reduction is commonly regarded as complementary to other drug problem responses - as the fourth tier. Yet even core examples of harm reduction such as the provision of injection equipment and methadone treatment has over and over encountered considerable opposition, and harm redu...

Aircraft Noise Reduction Subproject Overview

Science.gov (United States)

Fernandez, Hamilton; Nark, Douglas M.; Van Zante, Dale E.

2016-01-01

The material presents highlights of propulsion and airframe noise research being completed for the Advanced Air Transport Technology Project. The basis of noise reduction plans along with representative work for the airframe, propulsion, and propulsion-airframe integration is discussed for the Aircraft Noise reduction Subproject.

Chronic sleep reduction in adolescents

NARCIS (Netherlands)

Dewald-Kaufmann, J.F.

2012-01-01

Based on the results of this thesis, it can be concluded that sleep problems and chronic sleep reduction have a high impact on adolescents’ daytime functioning. Additionally, this research shows that gradual sleep extension can improve adolescents’ sleep and especially their chronic sleep reduction.

Exploring the reductive capacity of Pyrococcus furiosus : the reduction of carboxylic acids and pyridine nucleotides

NARCIS (Netherlands)

Ban, van den E.C.D.

2001-01-01

This Ph.D. project started in 1997 and its main goal was to obtain insight in the reductive capacity of the hyperthermophilic archaeon Pyrococcus furiosus . The research was focused on the biocatalytic reduction of carboxylic