textural signature reminiscent: Topics by WorldWideScience.org

Sample records for textural signature reminiscent

A signature dissimilarity measure for trabecular bone texture in knee radiographs

International Nuclear Information System (INIS)

Woloszynski, T.; Podsiadlo, P.; Stachowiak, G. W.; Kurzynski, M.

2010-01-01

Purpose: The purpose of this study is to develop a dissimilarity measure for the classification of trabecular bone (TB) texture in knee radiographs. Problems associated with the traditional extraction and selection of texture features and with the invariance to imaging conditions such as image size, anisotropy, noise, blur, exposure, magnification, and projection angle were addressed. Methods: In the method developed, called a signature dissimilarity measure (SDM), a sum of earth mover's distances calculated for roughness and orientation signatures is used to quantify dissimilarities between textures. Scale-space theory was used to ensure scale and rotation invariance. The effects of image size, anisotropy, noise, and blur on the SDM developed were studied using computer generated fractal texture images. The invariance of the measure to image exposure, magnification, and projection angle was studied using x-ray images of human tibia head. For the studies, Mann-Whitney tests with significance level of 0.01 were used. A comparison study between the performances of a SDM based classification system and other two systems in the classification of Brodatz textures and the detection of knee osteoarthritis (OA) were conducted. The other systems are based on weighted neighbor distance using compound hierarchy of algorithms representing morphology (WND-CHARM) and local binary patterns (LBP). Results: Results obtained indicate that the SDM developed is invariant to image exposure (2.5-30 mA s), magnification (x1.00-x1.35), noise associated with film graininess and quantum mottle ( 64x64 pixels). However, the measure is sensitive to changes in projection angle (>5 deg.), image anisotropy (>30 deg.), and blur generated by a regular film screen. For the classification of Brodatz textures, the SDM based system produced comparable results to the LBP system. For the detection of knee OA, the SDM based system achieved 78.8% classification accuracy and outperformed the WND
A signature dissimilarity measure for trabecular bone texture in knee radiographs

Energy Technology Data Exchange (ETDEWEB)

Woloszynski, T.; Podsiadlo, P.; Stachowiak, G. W.; Kurzynski, M. [Tribology Laboratory, School of Mechanical Engineering, University of Western Australia, Crawley, Western Australia 6009 (Australia); Chair of Computer Systems and Networks, Faculty of Electronics, Wroclaw University of Technology, Wybrzeze Wyspianskiego 27, 50-370 Wroclaw (Poland)

2010-05-15

Purpose: The purpose of this study is to develop a dissimilarity measure for the classification of trabecular bone (TB) texture in knee radiographs. Problems associated with the traditional extraction and selection of texture features and with the invariance to imaging conditions such as image size, anisotropy, noise, blur, exposure, magnification, and projection angle were addressed. Methods: In the method developed, called a signature dissimilarity measure (SDM), a sum of earth mover's distances calculated for roughness and orientation signatures is used to quantify dissimilarities between textures. Scale-space theory was used to ensure scale and rotation invariance. The effects of image size, anisotropy, noise, and blur on the SDM developed were studied using computer generated fractal texture images. The invariance of the measure to image exposure, magnification, and projection angle was studied using x-ray images of human tibia head. For the studies, Mann-Whitney tests with significance level of 0.01 were used. A comparison study between the performances of a SDM based classification system and other two systems in the classification of Brodatz textures and the detection of knee osteoarthritis (OA) were conducted. The other systems are based on weighted neighbor distance using compound hierarchy of algorithms representing morphology (WND-CHARM) and local binary patterns (LBP). Results: Results obtained indicate that the SDM developed is invariant to image exposure (2.5-30 mA s), magnification (x1.00-x1.35), noise associated with film graininess and quantum mottle (<25%), blur generated by a sharp film screen, and image size (>64x64 pixels). However, the measure is sensitive to changes in projection angle (>5 deg.), image anisotropy (>30 deg.), and blur generated by a regular film screen. For the classification of Brodatz textures, the SDM based system produced comparable results to the LBP system. For the detection of knee OA, the SDM based system
Stray field signatures of Néel textured skyrmions in Ir/Fe/Co/Pt multilayer films

Science.gov (United States)

Yagil, A.; Almoalem, A.; Soumyanarayanan, Anjan; Tan, Anthony K. C.; Raju, M.; Panagopoulos, C.; Auslaender, O. M.

2018-05-01

Skyrmions are nanoscale spin configurations with topological properties that hold great promise for spintronic devices. Here, we establish their Néel texture, helicity, and size in Ir/Fe/Co/Pt multilayer films by constructing a multipole expansion to model their stray field signatures and applying it to magnetic force microscopy images. Furthermore, the demonstrated sensitivity to inhomogeneity in skyrmion properties, coupled with a unique capability to estimate the pinning force governing dynamics, portend broad applicability in the burgeoning field of topological spin textures.
Verbal responses, depressive symptoms, reminiscence functions and cognitive emotion regulation in older women receiving individual reminiscence therapy.

Science.gov (United States)

Wu, Dongmei; Chen, Taolin; Yang, Hao; Gong, Qiyong; Hu, Xiuying

2018-07-01

To examine the effectiveness of individual reminiscence therapy in community-dwelling older women with depressive symptoms and to explore the characteristics of participants' verbalisation in the process. Previous studies have found reminiscence was related to depression and anxiety. Although reminiscence therapy is widely used to reduce depression, little is known about how it works, and the content of verbalisations might provide one explanation. The study employed a one-group pretest-post-test design. Twenty-seven participants underwent 6-week interventions of individual reminiscence therapy at home that were conducted by one nurse and induced through seeing old photographs. The Geriatric Depression Scale, Zung Self-rating Anxiety Scale, Reminiscence Functions Scale and Cognitive Emotion Regulation Questionnaire were used to measure the emotional states, reminiscence functions and cognitive emotion regulation strategies. Participants' verbalisations were categorised using the Client Behavior System. Reminiscence therapy relieved depression and anxiety. Both the reminiscence function and cognitive emotion regulation became more favourable after interventions. Furthermore, higher frequencies of recounting, cognitive-behavioural exploration and affective exploration were noted in the process. Participants with more severe depressive symptoms tended to display a higher frequency of affective exploration. The reduction in depression, self-negative reminiscence and negative-focused emotion regulation were respectively associated with verbalisations. Individual reminiscence therapy might relieve negative emotion and improve reminiscence function and cognitive emotion regulation. The participants' verbalisation is worthy of our attention, due to its correlation with the severity of depression and its mitigating effects on the depression, anxiety, self-negative reminiscence and negative-focused regulation in older women. The results contribute to our understanding of
Directional fractal signature methods for trabecular bone texture in hand radiographs: Data from the Osteoarthritis Initiative

International Nuclear Information System (INIS)

Wolski, M.; Podsiadlo, P.; Stachowiak, G. W.

2014-01-01

Purpose: To develop directional fractal signature methods for the analysis of trabecular bone (TB) texture in hand radiographs. Problems associated with the small size of hand bones and the orientation of fingers were addressed. Methods: An augmented variance orientation transform (AVOT) and a quadrant rotating grid (QRG) methods were developed. The methods calculate fractal signatures (FSs) in different directions. Unlike other methods they have the search region adjusted according to the size of bone region of interest (ROI) to be analyzed and they produce FSs defined with respect to any chosen reference direction, i.e., they work for arbitrary orientation of fingers. Five parameters at scales ranging from 2 to 14 pixels (depending on image size and method) were derived from rose plots of Hurst coefficients, i.e., FS in dominating roughness (FS Sta ), vertical (FS V ) and horizontal (FS H ) directions, aspect ratio (StrS), and direction signatures (StdS), respectively. The accuracy in measuring surface roughness and isotropy/anisotropy was evaluated using 3600 isotropic and 800 anisotropic fractal surface images of sizes between 20 × 20 and 64 × 64 pixels. The isotropic surfaces had FDs ranging from 2.1 to 2.9 in steps of 0.1, and the anisotropic surfaces had two dominating directions of 30° and 120°. The methods were used to find differences in hand TB textures between 20 matched pairs of subjects with (cases: approximate Kellgren-Lawrence (KL) grade ≥2) and without (controls: approximate KL grade <2) radiographic hand osteoarthritis (OA). The OA Initiative public database was used and 20 × 20 pixel bone ROIs were selected on 5th distal and middle phalanges. The performance of the AVOT and QRG methods was compared against a variance orientation transform (VOT) method developed earlier [M. Wolski, P. Podsiadlo, and G. W. Stachowiak, “Directional fractal signature analysis of trabecular bone: evaluation of different methods to detect early osteoarthritis
Reminiscence in dementia: a concept analysis.

Science.gov (United States)

Dempsey, Laura; Murphy, Kathy; Cooney, Adeline; Casey, Dympna; O'Shea, Eamon; Devane, Declan; Jordan, Fionnuala; Hunter, Andrew

2014-03-01

This paper is a report of an analysis of the concept of reminiscence in dementia and highlights its uses as a therapeutic intervention used on individuals with dementia. No single definition of reminiscence exists in healthcare literature; however, definitions offered have similar components. The term life review is commonly used when discussing reminiscence; however, both terms are quite different in their goals, theory base and content. This concept analysis identified reminiscence as a process which occurs in stages, involving the recalling of early life events and interaction between individuals. The antecedents of reminiscence are age, life transitions, attention span, ability to recall, ability to vocalise and stressful situations. Reminiscence can lead to positive mental health, enhanced self esteem and improved communication skills. It also facilitates preparation for death, increases interaction between people, prepares for the future and evaluates a past life. Reminiscence therapy is used extensively in dementia care and evidence shows when used effectively it helps individuals retain a sense of self worth, identity and individuality.
Directional fractal signature methods for trabecular bone texture in hand radiographs: Data from the Osteoarthritis Initiative

Energy Technology Data Exchange (ETDEWEB)

Wolski, M., E-mail: marcin.wolski@curtin.edu.au; Podsiadlo, P.; Stachowiak, G. W. [Tribology Laboratory, School of Civil and Mechanical Engineering, Curtin University, Bentley, Western Australia 6102 (Australia)

2014-08-15

Purpose: To develop directional fractal signature methods for the analysis of trabecular bone (TB) texture in hand radiographs. Problems associated with the small size of hand bones and the orientation of fingers were addressed. Methods: An augmented variance orientation transform (AVOT) and a quadrant rotating grid (QRG) methods were developed. The methods calculate fractal signatures (FSs) in different directions. Unlike other methods they have the search region adjusted according to the size of bone region of interest (ROI) to be analyzed and they produce FSs defined with respect to any chosen reference direction, i.e., they work for arbitrary orientation of fingers. Five parameters at scales ranging from 2 to 14 pixels (depending on image size and method) were derived from rose plots of Hurst coefficients, i.e., FS in dominating roughness (FS{sub Sta}), vertical (FS{sub V}) and horizontal (FS{sub H}) directions, aspect ratio (StrS), and direction signatures (StdS), respectively. The accuracy in measuring surface roughness and isotropy/anisotropy was evaluated using 3600 isotropic and 800 anisotropic fractal surface images of sizes between 20 × 20 and 64 × 64 pixels. The isotropic surfaces had FDs ranging from 2.1 to 2.9 in steps of 0.1, and the anisotropic surfaces had two dominating directions of 30° and 120°. The methods were used to find differences in hand TB textures between 20 matched pairs of subjects with (cases: approximate Kellgren-Lawrence (KL) grade ≥2) and without (controls: approximate KL grade <2) radiographic hand osteoarthritis (OA). The OA Initiative public database was used and 20 × 20 pixel bone ROIs were selected on 5th distal and middle phalanges. The performance of the AVOT and QRG methods was compared against a variance orientation transform (VOT) method developed earlier [M. Wolski, P. Podsiadlo, and G. W. Stachowiak, “Directional fractal signature analysis of trabecular bone: evaluation of different methods to detect early
Consequences from use of reminiscence

DEFF Research Database (Denmark)

Gudex, Claire; Horsted, Charlotte; Jensen, Anders Møller

2010-01-01

Background: Reminiscence is the systematic use of memories and recollections to strengthen self-identity and self-worth. The study aim was to investigate the consequences for nursing home residents and staff of integrating reminiscence into daily nursing care. Methods: In this randomised study, ten...... than those in the Control Group for Personal accomplishment, Emotional exhaustion, Depersonalisation, ‘Attitude towards individual contact with residents’ and SF-12 self-rated mental health. At 12 months after start of reminiscence, staff in the Intervention Group had significantly better scores than...
Texture recognition of medical images with the ICM method

International Nuclear Information System (INIS)

Kinser, Jason M.; Wang Guisong

2004-01-01

The Integrated Cortical Model (ICM) is based upon several models of the mammalian visual cortex and produces pulse images over several iterations. These pulse images tend to isolate segments, edges, and textures that are inherent in the input image. To create a texture recognition engine the pulse spectrum of individual pixels are collected and used to develop a recognition library. Recognition is performed by comparing pulse spectra of unclassified regions of images with the known regions. Because signatures are smaller than images, signature-based computation is quite efficient and parasites can be recognized quickly. The precision of this method depends on the representative of signatures and classification. Our experiment results support the theoretical findings and show perspectives of practical applications of ICM-based method. The advantage of ICM method is using signatures to represent objects. ICM can extract the internal features of objects and represent them with signatures. Signature classification is critical for the precision of recognition
SenseCam reminiscence and action recall in memory-unimpaired people.

Science.gov (United States)

Seamon, John G; Moskowitz, Tacie N; Swan, Ashley E; Zhong, Boyuan; Golembeski, Amy; Liong, Christopher; Narzikul, Alexa C; Sosan, Olumide A

2014-01-01

Case studies of memory-impaired individuals consistently show that reminiscing with SenseCam images enhances event recall. This exploratory study examined whether a similar benefit would occur for the consolidation of memories in memory-unimpaired people. We tested delayed recall for atypical actions observed on a lengthy walk. Participants used SenseCam, a diary, or no external memory aid while walking, followed by reminiscence with SenseCam images, diary entries, or no aid, either alone (self-reminiscence) or with the experimenter (social reminiscence). One week later, when tested without SenseCam images or diary entries, prior social reminiscence produced greater recall than self-reminiscence, but there were no differences between memory aid conditions for action free recall or action order recall. When methodological variables were controlled, there was no recall advantage for SenseCam reminiscence with memory-unimpaired participants. The case studies and present study differ in multiple ways, making direct comparisons problematic. SenseCam is a valuable aid to the memory impaired, but its mnemonic value for non-clinical populations remains to be determined.
Does pedagogical documentation support maternal reminiscing conversations?

Directory of Open Access Journals (Sweden)

Bethany Fleck

2015-12-01

Full Text Available When parents talk with their children about lessons learned in school, they are participating in reminiscing of an unshared event. This study sought to understand if pedagogical documentation, from the Reggio Approach to early childhood education, would support and enhance the conversation. Mother–child dyads reminisced two separate times about preschool lessons, one time with documentation available to them and one time without. Transcripts were coded extracting variables indicative of high and low maternal reminiscing styles. Results indicate that mother and child conversation characteristics were more highly elaborative when documentation was present than when it was not. In addition, children added more information to the conversation supporting the notion that such conversations enhanced memory for lessons. Documentation could be used as a support tool for conversations and children’s memory about lessons learned in school.
Effects of a reminiscence program among institutionalized elderly adults.

Science.gov (United States)

Meléndez-Moral, Juan Carlos; Charco-Ruiz, Laura; Mayordomo-Rodríguez, Teresa; Sales-Galán, Alicia

2013-01-01

Institutionalization during old age requires tremendous adaptability. Among the main consequences of the difficulty of adapting to the institutional context are prevalent depressive symptoms and low well-being. Reminiscence therapy has proven to be among the most effective at minimizing these outcomes. This study purpose was to investigate the usefulness of reminiscence intervention in an elderly, institutionalized sample. Following a group format, the intervention lasted eight sessions and compared a treatment group and a control group, using pre-post measures and a single-blind design. We predicted that reminiscence intervention would have a positive impact on depressive symptoms, self-esteem, life satisfaction, and psychological well-being. Significant results were obtained, including a drop in depressive symptoms and improved self-esteem, satisfaction, and psychological well-being. We conclude that reminiscence intervention yielded positive effects in institutionalized, elderly participants.
Pneumothorax detection in chest radiographs using local and global texture signatures

Science.gov (United States)

Geva, Ofer; Zimmerman-Moreno, Gali; Lieberman, Sivan; Konen, Eli; Greenspan, Hayit

2015-03-01

A novel framework for automatic detection of pneumothorax abnormality in chest radiographs is presented. The suggested method is based on a texture analysis approach combined with supervised learning techniques. The proposed framework consists of two main steps: at first, a texture analysis process is performed for detection of local abnormalities. Labeled image patches are extracted in the texture analysis procedure following which local analysis values are incorporated into a novel global image representation. The global representation is used for training and detection of the abnormality at the image level. The presented global representation is designed based on the distinctive shape of the lung, taking into account the characteristics of typical pneumothorax abnormalities. A supervised learning process was performed on both the local and global data, leading to trained detection system. The system was tested on a dataset of 108 upright chest radiographs. Several state of the art texture feature sets were experimented with (Local Binary Patterns, Maximum Response filters). The optimal configuration yielded sensitivity of 81% with specificity of 87%. The results of the evaluation are promising, establishing the current framework as a basis for additional improvements and extensions.
Cloud and surface textural features in polar regions

Science.gov (United States)

Welch, Ronald M.; Kuo, Kwo-Sen; Sengupta, Sailes K.

1990-01-01

The study examines the textural signatures of clouds, ice-covered mountains, solid and broken sea ice and floes, and open water. The textural features are computed from sum and difference histogram and gray-level difference vector statistics defined at various pixel displacement distances derived from Landsat multispectral scanner data. Polar cloudiness, snow-covered mountainous regions, solid sea ice, glaciers, and open water have distinguishable texture features. This suggests that textural measures can be successfully applied to the detection of clouds over snow-covered mountains, an ability of considerable importance for the modeling of snow-melt runoff. However, broken stratocumulus cloud decks and thin cirrus over broken sea ice remain difficult to distinguish texturally. It is concluded that even with high spatial resolution imagery, it may not be possible to distinguish broken stratocumulus and thin clouds from sea ice in the marginal ice zone using the visible channel textural features alone.
Maternal attachment is differentially associated with mother-child reminiscing among maltreating and nonmaltreating families.

Science.gov (United States)

Lawson, Monica; Valentino, Kristin; McDonnell, Christina G; Speidel, Ruth

2018-05-01

In the current investigation, we examined associations between maternal attachment and the way that mothers and children discuss past emotional experiences (i.e., reminiscing) among 146 maltreating and 73 nonmaltreating mothers and their 3- to 6-year-old children. Recent studies demonstrate that maltreating mothers engage in less elaborative reminiscing compared with nonmaltreating mothers. To further explicate the nature of reminiscing among maltreating families, we examined maternal and child contributions to reminiscing, their interrelations, and associations with maternal attachment among dyads from maltreating and nonmaltreating families. Maternal attachment is theoretically and empirically associated with mother-child reminiscing, and an insecure maternal attachment style was hypothesized to exacerbate poor elaborative reminiscing among maltreating families. Mothers and children reminisced about four emotional experiences. Maternal attachment was measured with the Experience in Close Relationships-Revised questionnaire. Mothers and children from maltreating families engaged in less elaborative and emotion-rich reminiscing compared with nonmaltreating dyads. Maternal attachment anxiety was negatively associated with maternal elaborative reminiscing, but only among nonmaltreating mothers. Mother-child reminiscing among dyads with nonmaltreating and low attachment anxiety mothers was highly collaborative; whereas reminiscing among dyads with maltreating and high attachment anxiety mothers was less reciprocal. Our findings largely support communicative perspectives of attachment theory and also indicate that maternal attachment is differentially associated with mother-child reminiscing among maltreating and nonmaltreating families. Copyright © 2017 Elsevier Inc. All rights reserved.
Early Reminiscing in Cultural Contexts: Cultural Models, Maternal Reminiscing Styles, and Children's Memories

Science.gov (United States)

Schroder, Lisa; Keller, Heidi; Kartner, Joscha; Kleis, Astrid; Abels, Monika; Yovsi, Relindis D.; Chaudhary, Nandita; Jensen, Henning; Papaligoura, Zaira

2013-01-01

The present study examined conversations of 164 mothers from seven different cultural contexts when reminiscing with their 3-year-old children. We chose samples based on their sociodemographic profiles, which represented three different cultural models: (1) autonomy (urban middle-class families from Western societies), (2) relatedness (rural…
Holocaust Survivors' Memories of Past Trauma and the Functions of Reminiscence.

Science.gov (United States)

O'Rourke, Norm; Canham, Sarah; Wertman, Annette; Chaudhury, Habib; Carmel, Sara; Bachner, Yaacov G; Peres, Hagit

2016-08-01

Existing research suggests that specific ways of recalling autobiographical memories of one's past cluster in self-positive, self-negative, and prosocial reminiscence functions. We undertook the present qualitative study to gain understanding of reminiscence functions as described by 269 Israeli Holocaust survivors and to see whether groupings of themes that emerged would correspond to our tripartite model of the reminiscence functions. Participants (M = 80.4 years; SD = 6.87) were asked to describe memories that typify a reminiscence function in which they frequently or very frequently engage. Thematic analyses were conducted in English (translated) and Hebrew. Responses reflect the range of ways in which Holocaust survivors reminisce. The task of describing early life memories was difficult for some participants, while others' lived experiences enabled them to teach others to ensure that their collective memory remains in the consciousness of the next generation of Israelis and the Jewish state. Data are imbued with examples of horror, resilience, generativity, and gratitude. As hypothesized, survivors' memories cluster in self-positive, self-negative, and prosocial groupings consistent with the tripartite model of reminiscence functions. © The Author 2015. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Empirical validation of a model of reminiscence and health in later life.

Science.gov (United States)

Cappeliez, Philippe; O'Rourke, Norm

2006-07-01

This study addresses the adaptive value of functions of reminiscence with respect to physical and mental health in later life. A model examining the relationships between the functions of reminiscence and life satisfaction, psychiatric distress, and health is presented and tested. Self-positive (reminiscence for Identity, Death Preparation, and Problem Solving) and self-negative (reminiscence for Boredom Reduction, Bitterness Revival, and Intimacy Maintenance) functions have statistically significant and direct associations with the well-being of this sample of older adults, the first positively and the second negatively. Prosocial functions (reminiscence for Conversation, and to Teach-Inform Others) appear to have no direct link with health. Self-functions appear to have an important and lasting influence on physical and mental health, whereas prosocial functions may affect health by means of their role in emotional regulation.
Reminiscence and mental health: a review of recent progress in theory, research and interventions

NARCIS (Netherlands)

Westerhof, Gerben Johan; Bohlmeijer, Ernst Thomas; Webster, Jeffrey Dean; Webster, Jeffrey Dean

2010-01-01

This article explores recent progress in theory, research and practical applications of reminiscence. It first describes the evidence for reminiscence as a naturally occurring process, and discusses the different functions of reminiscence and their relationships with mental health and lifespan
Reminiscence therapy for dementia.

Science.gov (United States)

Woods, Bob; O'Philbin, Laura; Farrell, Emma M; Spector, Aimee E; Orrell, Martin

2018-03-01

This updated Cochrane Review of reminiscence therapy (RT) for dementia was first published in 1998, and last updated in 2005. RT involves the discussion of memories and past experiences with other people using tangible prompts such as photographs or music to evoke memories and stimulate conversation. RT is implemented widely in a range of settings using a variety of formats. To assess the effects of RT on people living with dementia and their carers, taking into account differences in its implementation, including setting (care home, community) and modality (group, individual). We searched ALOIS (the Cochrane Dementia and Cognitive Improvement Group's Specialized Register) on 6 April 2017 using the search term 'reminiscence.' We included all randomised controlled trials of RT for dementia in which the duration of the intervention was at least four weeks (or six sessions) and that had a 'no treatment' or passive control group. Outcomes of interest were quality of life (QoL), cognition, communication, behaviour, mood and carer outcomes. Two authors (LOP and EF) independently extracted data and assessed risk of bias. Where necessary, we contacted study authors for additional information. We pooled data from all sufficiently similar studies reporting on each outcome. We undertook subgroup analysis by setting (community versus care home) and by modality (individual versus group). We used GRADE methods to assess the overall quality of evidence for each outcome. We included 22 studies involving 1972 people with dementia. Meta-analyses included data from 16 studies (1749 participants). Apart from six studies with risk of selection bias, the overall risk of bias in the studies was low.Overall, moderate quality evidence indicated RT did not have an important effect on QoL immediately after the intervention period compared with no treatment (standardised mean difference (SMD) 0.11, 95% confidence interval (CI) -0.12 to 0.33; I 2 = 59%; 8 studies; 1060 participants

Individual Reminiscence Therapy can Decrease Depression Level on Elderly at Social Homes

Directory of Open Access Journals (Sweden)

Laily Nur Hidayati

2015-10-01

Full Text Available Introduction: Aging is a natural process in oldest old. The psychosocial development of the elderly to enhance self-integration. Reminiscence therapy is one of psychosocial treatment for elderly using memory recall of one’s life event in the past. The purpose of this study was to determine the effect of individual reminiscence therapy on depression among elderly in the social homes. Method: The study design was used Quasy-Eksperiment Pre-Post Test with Control Group. A total of 60 elderly people were recruited in this study and assigned into two groups, 31 participants in the intervention group and 29 participants in the control group. Independent variable was reminiscence therapy five sessions, which given to the intervention group. While, dependent variable was the level of depression on elderly. Data were collected by using GDS, then analyzed by using Wilcoxon and Mann-Whitney statistical test with level of significance α≤0.05. Result: After providing individual reminiscence therapy, the intervention group showed a significant decrease in depression as compared to those in the control group was found (p=0.008. Discussion: The individual reminiscence therapy is useful to overcome depression among elderly. The nurse can know the personality of each elderly so as to improve the quality of nursing care for elderly Keywords: individual reminiscence therapy, depression, elderly
Effects of group reminiscence on elderly depression: A meta-analysis

OpenAIRE

Dan Song; Qin Shen; Tu-Zhen Xu; Qiu-Hua Sun

2014-01-01

Background/purpose: The present meta-analysis was performed to evaluate the effectiveness of group reminiscence on depression in elderly patients. Methods: Published and unpublished randomised controlled trials that assessed the effects of group reminiscence on depression in elderly patients were systematically reviewed using multiple electronic databases. Relative risks for dichotomous data and weighted mean differences for continuous data were calculated with 95% confidence intervals. ...
Reminiscences a journey through particle physics

CERN Document Server

Melissinos, Adrian

2013-01-01

A personal recount in areas of particle physics and related fields as a research physicist for over 50 years, Adrian Melissinos' insights into the ways that general research was carried out, as well as the evolution of particle physics from 1958 to 2008 will prove valuable to science history enthusiasts, as well as particle physicists. Be it conventional accelerator experiments, the use of microwave techniques in search of cosmic axions, or taking advantage of high power lasers to observe light-by-light scattering, the excitement of searching for something new in the face of failures and then successes is enriching, and the collaboration with gifted and outstanding colleagues and students proves insightful. A hybrid of personal reminiscences and a professional journey, readers get to relive the joy and excitement of researching and teaching in small groups during those early years while gaining a partial historical perspective of particle physics since 1958 - all in "Reminiscences: A Journey through Particle ...
The Relationship Between Reminiscence Functions, Optimism, Depressive Symptoms, Physical Activity, and Pain in Older Adults.

Science.gov (United States)

McDonald, Deborah Dillon; Shellman, Juliette M; Graham, Lindsey; Harrison, Lisa

2016-09-01

The study purpose was to examine the association between reminiscence functions, optimism, depressive symptoms, physical activity, and pain in older adults with chronic lower extremity osteoarthritis pain. One hundred ninety-five community-dwelling adults were interviewed using the Modified Reminiscence Functions Scale, Brief Pain Inventory, Life Orientation Test-Revised, Center for Epidemiologic Studies Short Depression Scale, and Physical Activity Scale for the Elderly in random counterbalanced order. Structural equation modeling supported chronic pain as positively associated with depressive symptoms and comorbidities and unrelated to physical activity. Depressive symptoms were positively associated with self-negative reminiscence and negatively associated with optimism. Spontaneous reminiscence was not associated with increased physical activity or reduced pain. Individuals may require facilitated integrative reminiscence to assist them in reinterpreting negative memories in a more positive way. Facilitated integrative reminiscence about enjoyed past physical activity is a potential way to increase physical activity, but must be tested in future research. [Res Gerontol Nurs. 2016; 9(5):223-231.]. Copyright 2016, SLACK Incorporated.
Cascading reminiscence bumps in popular music.

Science.gov (United States)

Krumhansl, Carol Lynne; Zupnick, Justin Adam

2013-10-01

Autobiographical memories are disproportionately recalled for events in late adolescence and early adulthood, a phenomenon called the reminiscence bump. Previous studies on music have found autobiographical memories and life-long preferences for music from this period. In the present study, we probed young adults' personal memories associated with top hits over 5-and-a-half decades, as well as the context of their memories and their recognition of, preference for, quality judgments of, and emotional reactions to that music. All these measures showed the typical increase for music released during the two decades of their lives. Unexpectedly, we found that the same measures peaked for the music of participants' parents' generation. This finding points to the impact of music in childhood and suggests that these results reflect the prevalence of music in the home environment. An earlier peak occurred for 1960s music, which may be explained by its quality or by its transmission through two generations. We refer to this pattern of musical cultural transmission over generations as cascading reminiscence bumps.
Reminiscence bump in memory for public events

NARCIS (Netherlands)

Janssen, S.M.J.; Murre, J.M.J.; Meeter, M.

2008-01-01

People tend to recall more personal events from adolescence and early adulthood than from other lifetime periods. Most evidence suggests that differential encoding causes this reminiscence bump. However, the question why personal events are encoded better in those periods is still unanswered. To
Functions of reminiscence and the psychological well-being of young-old and older adults over time.

Science.gov (United States)

O'Rourke, Norm; Cappeliez, Philippe; Claxton, Amy

2011-03-01

Existing cross-sectional research demonstrates an association between reminiscence functions and well-being in later life. The results of this study replicate and extend previous findings in separate participant samples above and below 70 years of age. Findings suggest a link between reminiscence functions and psychological well-being, and indirectly between reminiscence and well-being 16 months thereafter. Invariance analyses reveal few differences in association between reminiscence and well-being when young-old (n = 196) and older adults (n = 215) are compared. These findings suggest a direct positive association between self-positive reminiscence functions (identity, death preparation, and problem-solving) and a direct negative association between self-negative functions (boredom reduction, bitterness revival, and intimacy maintenance) and psychological well-being (life satisfaction, depressive, and anxiety symptoms). In contrast, prosocial reminiscence functions (conversation, teach/inform others) appear to have an indirect association with well-being (i.e., via self-positive and self-negative functions). These findings are discussed relative to evolving theory and research linking cognition and health.
Structured reminiscence: an intervention to decrease depression and increase self-transcendence in older women.

Science.gov (United States)

Stinson, Cynthia Kellam; Kirk, Edythe

2006-02-01

The purpose of this study was to assess the effect of group reminiscing on depression and self-transcendence of older women residing in an assisted living facility in southeast Texas. There were two major objectives for this study. One objective was to determine if depression decreased in older women after structured reminiscence group sessions held twice weekly for a six-week period. A second objective was to determine if self-transcendence increased after structured reminiscence group sessions held twice weekly for a six-week period. Reminiscence has been studied to determine its impact on a variety of conditions including but not limited to depression, self-esteem, fatigue, isolation, socialization, well-being, language acquisition and cognitive functioning. This review of research specifically focused on reminiscence, depression, self-transcendence and older people. Two groups were assessed at baseline, three and six weeks to answer the research questions. A sample of 24 women between the ages of 72 and 96 years were randomly assigned to either a reminiscence (experimental) group or the activity (control) group of the facility. Pearson's r was used to determine the magnitude of the relationship between subjects' responses on the Geriatric Depression Scale and the Self-Transcendence Scale. A mixed design analysis of variance (anova) was used to determine if there was a difference between the experimental and control groups on scores of the Geriatric Depression Scale and the Self-Transcendence Scale at baseline, three and six weeks. Data revealed a non-significant decrease in depression and increase in self-transcendence in the reminiscence group at the completion of six weeks, indicating a trend toward a positive result with reminiscence group sessions. The study also revealed an inverse relationship between depression and self-transcendence. These findings underscore the importance of screening older people for depression. One of the primary modalities used for
Reminiscences by Dr. I.I. Rabi

International Nuclear Information System (INIS)

Rabi, I.I.

1973-01-01

Dr. I.I. Rabi, Professor of Physics, Columbia University, Nobel Laureate, adviser to presidents and an original member of the scientific advisory committees both of the United Nations and the IAEA, delivered the following address at the Salazar Atomic Centre, Mexico, in October 1972 he spoke on 'reminiscences from scientific advisory services to governments and international organizations'. (author)
Maternal Elaborative Reminiscing Mediates the Effect of Child Maltreatment on Behavioral and Physiological Functioning

Science.gov (United States)

Valentino, Kristin; Hibel, Leah C; Cummings, E. Mark; Nuttall, Amy K.; Comas, Michelle; McDonnell, Christina G.

2016-01-01

Theoretical and empirical evidence suggest that the way in which parents discuss everyday emotional experiences with their young children (i.e., elaborative reminiscing) has significant implications for child cognitive and socio-emotional functioning, and that maltreating parents have a particularly difficult time in engaging in this type of dialogue. This dyadic interactional exchange, therefore, has the potential to be an important process variable linking child maltreatment to developmental outcomes at multiple levels of analysis. The current investigation evaluated the role of maternal elaborative reminiscing in associations between maltreatment and child cognitive, emotional, and physiological functioning. Participants included 43 maltreated and 49 nonmaltreated children (aged 3–6) and their mothers. Dyads participated in a joint reminiscing task about four past emotional events, and children participated in assessments of receptive language and emotion knowledge. Child salivary cortisol was also collected from children three times a day (waking, midday, and bedtime) on two consecutive days to assess daily levels and diurnal decline. Results indicated that maltreating mothers engaged in significantly less elaborative reminiscing than nonmaltreating mothers. Maternal elaborative reminiscing mediated associations between child maltreatment and child receptive language and child emotion knowledge. Additionally, there was support for an indirect pathway between child maltreatment and child cortisol diurnal decline through maternal elaborative reminiscing. Directions for future research are discussed and potential clinical implications are addressed. PMID:26535941
The stories we live by : the adaptive role of reminiscence in later life

NARCIS (Netherlands)

Korte, J.

2012-01-01

This thesis has demonstrated how reminiscence can have an adaptive value for mental health in later life. The first aim of this thesis was to study the relationship between reminiscence and mental health. In a sample of older adults with mild to moderate depressive symptomatology, it has been shown
Consequences from use of reminiscence - a randomised intervention study in ten Danish nursing homes

Directory of Open Access Journals (Sweden)

Sørensen Jan

2010-06-01

Full Text Available Abstract Background Reminiscence is the systematic use of memories and recollections to strengthen self-identity and self-worth. The study aim was to investigate the consequences for nursing home residents and staff of integrating reminiscence into daily nursing care. Methods In this randomised study, ten nursing homes were matched into two groups on the basis of location, type and size. In the period August 2006 - August 2007, staff in the Intervention Group were trained and supported in the use of reminiscence, involving individual and group sessions with residents as well as reminiscence boxes, posters and exhibitions. At baseline and again 6 and 12 months after the intervention start, data were collected on residents' cognitive level, agitated behaviour, general functioning and proxy-assessed quality of life, as well as on staff well-being and job satisfaction. Mixed linear modelling was used to analyse differences in outcome between the intervention and control groups. Results Project drop-out rates were 32% for residents and 38% for nursing staff. Most staff in the Intervention Group considered reminiscence a useful tool that improved their communication with residents, and that they would recommend to other nursing homes. There were no significant differences between residents in the Intervention and the Control Group in cognitive level, agitated behaviour or general functioning. Residents in the Intervention Group showed significant higher score at 6 months in quality of life subscale 'Response to surroundings', but there was no significant difference at 12 months. Positive effects of reminiscence were observed for all staff outcome measures, the only exception being SF-12 self-rated physical health. At 6 months after start of reminiscence, staff in the Intervention Group had significantly better scores than those in the Control Group for Personal accomplishment, Emotional exhaustion, Depersonalisation, 'Attitude towards individual
Elaboration and Autonomy Support in Low-Income Mothers' Reminiscing: Links to Children's Autobiographical Narratives

Science.gov (United States)

Leyva, Diana; Reese, Elaine; Grolnick, Wendy; Price, Carrie

2008-01-01

Maternal elaboration and autonomy support during reminiscing facilitate middle-class children's autobiographical narrative skills. In this study, low-income Hispanic, White, and Black mothers' elaboration and autonomy support in reminiscing were examined in relation to children's joint and independent autobiographical narratives and engagement.…
A study of group reminiscence therapy and emotional intelligence among elderly members

Directory of Open Access Journals (Sweden)

Azam Bazooband

2016-09-01

Full Text Available This study aims to investigate the effects of group reminiscence therapy on elderly’s emotional intelligence. A quasi-experimental research with a pre-test-post-test control group was conducted in July 2015, with a sample of 40 elderly members referring to an (anonymous Community Center in the city of Shiraz, Iran. A predesigned instrument, i.e., the Emotional Intelligence Questionnaire developed by Schering, was applied to collect data. SPSS Statistics v. 22.0 (Released 2013; IBM Corp., Armonk, NY, USA was used to analyze data, with a 95% confidence level and a measurement error of α=0.05. Hypothesis tests were mainly conducted to examine whether group reminiscence therapy correlates with emotional intelligence among the respondents. Findings revealed that the applied intervention i.e., group reminiscence therapy significantly associates with various dimensions of emotional intelligence including self-awareness, self-control, self-motivation, empathy and social skills in the older adults within the experiment group; i.e., the mean scores of the variables for the post-test administered on the experimental group were significantly higher than those on the control group. Group reminiscence therapy has the potential to enhance emotional intelligence in the elderly by helping them control their thoughts and emotions and learn problem-solving skills.
Adaptive autobiographical memory in younger and older adults: the indirect association of integrative and instrumental reminiscence with depressive symptoms.

Science.gov (United States)

Hallford, D J; Mellor, D; Cummins, R A

2013-01-01

Despite the established effectiveness of reminiscence-based interventions for depression, little research exists into the pathways through which specific reminiscence functions are related to depressive symptoms. Drawing on theory of the mechanisms of change in cognitive-reminiscence therapy, the current study tests the hypothesised indirect associations of adaptive integrative and instrumental reminiscence functions with depressive symptoms and whether these relationships might differ among younger and older adults. Questionnaires were completed by a large community sample of the Australian population. Multiple mediation models were tested in two groups: younger adults (n = 730, M age = 52.24, SD=9.84) and older adults (n = 725, M age= 73.59, SD=6.29). Results were consistent across age groups, indicating that there was direct relationship between these reminiscence functions and depressive symptoms, but that integrative reminiscence is indirectly associated with depressive symptoms through meaning in life, self-esteem, and optimism, and that instrumental reminiscence is indirectly associated with depressive symptoms through primary control and self-efficacy. This study provides support for the relationships between constructs underlying the proposed mechanisms of change in cognitive-reminiscence therapy for the treatment of depression, and suggests these relationships are similar for younger and older adults.
A Review of Reminiscing in Early Childhood Settings and Links to Sustained Shared Thinking

Science.gov (United States)

Neale, Dave; Pino-Pasternak, Deborah

2017-01-01

The importance of parent-child reminiscing for young children's social and cognitive development has been well established, but despite the increasing numbers of children attending formal early childhood settings such as nurseries and preschools, there has been surprisingly little research exploring educator-child reminiscing in these contexts.…
Nostalgic Reminiscences | Elimimian | Lwati: A Journal of ...

African Journals Online (AJOL)

The theme of the past and the present, or the now and then -- however we may like to re-phrase it -- is a dominant motif in Leopold Sedar Senghor's poetic art. Often and then in our life, we have moments of reflections or nostalgic reminiscences in which we compare and contrast in our mind situations or circumstances by ...
Mother-child reminiscing and autobiographical memory specificity among preschool-age children.

Science.gov (United States)

Valentino, Kristin; Nuttall, Amy K; Comas, Michelle; McDonnell, Christina G; Piper, Brianna; Thomas, Taylor E; Fanuele, Suzanne

2014-04-01

Overgeneral memory (OGM) refers to difficulty in retrieving specific autobiographical memories. The tendency to be overgeneral in autobiographical memory recall is more commonly observed among individuals with emotional disorders compared with those without. Despite significant advances in theory and identification of mechanisms that underlie the etiology of OGM, there has been little integration between normative research on the development of autobiographical memory and research on OGM. Informed by a developmental psychopathology perspective and drawing on normative developmental research on the social construction of autobiographical memory, the current investigation examined whether the elaborative quantity and elaborative quality of maternal reminiscing are predictive of preschool-age children's autobiographical memory specificity. Additionally, this investigation tested whether children's positive self-representations may explain these hypothesized associations. Participants consisted of 95 mother-child dyads. Children's ages ranged between 3.5 and 6 years, and the sample was predominantly low income and of minority race/ethnicity. Dyads participated in a joint reminiscing task about 4 past events, and children participated in assessments of autobiographical memory specificity and self-representations. Results indicated that the elaborative quality, defined by maternal-sensitive guidance and emotional narrative coherence, but not the elaborative quantity, of maternal reminiscing style was significantly associated with children's autobiographical memory specificity. Additionally, there was support for an indirect pathway between maternal reminiscing quality and child memory specificity through children's positive self-representations. Directions for future research are discussed, and potential clinical implications are addressed. PsycINFO Database Record (c) 2014 APA, all rights reserved.
Family Reminiscing Style: Parent Gender and Emotional Focus in Relation to Child Well-Being

Science.gov (United States)

Fivush, Robyn; Marin, Kelly; McWilliams, Kelly; Bohanek, Jennifer G.

2009-01-01

Family reminiscing is a critical part of family interaction related to child outcome. In this study, we extended previous research by examining both mothers and fathers, in two-parent racially diverse middle-class families, reminiscing with their 9- to 12-year-old children about both the facts and the emotional aspects of shared positive and…
Brief reminiscence activities improve state well-being and self-concept in young adults: a randomised controlled experiment.

Science.gov (United States)

Hallford, David John; Mellor, David

2016-11-01

Reminiscence-based psychotherapies have been demonstrated to have robust effects on a range of therapeutic outcomes. However, little research has been conducted on the immediate effects of guided activities they are composed of, or how these might differ dependent on the type of reminiscence. The current study utilised a controlled experimental design, whereby 321 young adults (mean age = 25.5 years, SD = 3.0) were randomised to one of four conditions of online reminiscence activity: problem-solving (successful coping experiences), identity (self-defining events contributing to a meaningful and continuous personal identity), bitterness revival (negative or adverse events), or a control condition (any memory from their past). Participants recalled autobiographical memories congruent with the condition, and answered questions to facilitate reflection on the memories. The results indicated that problem-solving and identity reminiscence activities caused significant improvements in self-esteem, meaning in life, self-efficacy and affect, whereas no effects were found in the bitterness revival and control conditions. Problem-solving reminiscence also caused a small effect in increasing perceptions of a life narrative/s. Differences between the conditions did not appear to be explained by the positive-valence of memories. These results provide evidence for the specific effects of adaptive types of problem-solving and identity reminiscence in young adults.

Reminiscence can be misleading | Orpen | Scientia Militaria: South ...

African Journals Online (AJOL)

Scientia Militaria: South African Journal of Military Studies. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 10, No 4 (1980) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Reminiscence can be ...
Reminiscence groups for people with dementia and their family carers: pragmatic eight-centre randomised trial of joint reminiscence and maintenance versus usual treatment: a protocol

Directory of Open Access Journals (Sweden)

Orrell Martin

2009-07-01

Full Text Available Abstract Background The growing number of people with dementia, and the increasing cost of care, provides a major incentive to develop and test methods of supporting them in the community for longer. Most attention has been given to pharmacological interventions, but there is increasing recognition that psychosocial interventions may be equally effective, even preferable where medication has negative side-effects. Reminiscence groups, run by professionals and volunteers, which use photographs, recordings and other objects to trigger personal memories are probably the most popular therapeutic approach to working with people with dementia, but there is little evidence for their effectiveness and cost-effectiveness. The recent inclusion of family carers in groups with people with dementia, notably in our own pilot studies, has generated informal evidence that this joint approach improves relationships between people with dementia and their carers, and benefits both. Design and methods This multi-centre, pragmatic randomised controlled trial (RCT to assess the effectiveness and cost-effectiveness of joint reminiscence groups for people with dementia and their family care-givers has two parallel arms – an intervention group and a control group who receive care as usual. The intervention consists of joint reminiscence groups held weekly for twelve consecutive weeks, followed by monthly maintenance sessions for a further seven months. The primary outcome measures are the quality of life of people with dementia, as assessed by QoL-AD, and their care-givers' mental health as assessed by the GHQ-28. Secondary outcomes include: the autobiographical memories of people with dementia; the quality of the relationship between them and their care-givers; and the levels of depression and anxiety felt by them and their care-giver. Using a 5% significance level, comparison of 200 pairs attending joint reminiscence groups with 200 pairs receiving usual treatment
The Effect of Group Reminiscence Therapy on Depression in Women With Type II Diabetes

Directory of Open Access Journals (Sweden)

Jooj

2016-01-01

Full Text Available Background Diabetes mellitus is associated with an increased risk of psychological disorders and symptoms. Objectives This research investigated the effect of group reminiscence therapy on depression among women with type II diabetes. Patients and Methods The present study was a clinical trial study. Twenty-four patients referring to the diabetic clinic of Golestan hospital in Ahvaz, Iran were selected through simple random sampling and were divided in two groups. Data were collected through a demographic questionnaire and the Beck Depression Inventory. Group reminiscence therapy was held over eight biweekly sessions, each lasting 90 minutes. Finally, data were analyzed through descriptive statistics and the Mann-Whitney, Friedman, and Chi-Square tests, using SPSS version 20. Results A significant difference was observed between the two groups after the intervention (P = 0.001. The rating for depression decreased significantly in the experimental group. Before the group reminiscence therapy, the highest rating for depression obtained by the experimental group was “need for consultation” (50%, whereas after the intervention, the highest rating was “no depression” (50%. One month after the intervention, the highest rating obtained for depression was “low” (50%. Conclusions Reminiscence therapy decreased depression among diabetic female patients after the intervention and one month after the intervention. It can be said that, through the reminiscence therapy, patients’ past memories were reviewed and emphasis on the positive aspects thereof in the group setting was followed by an increased sense of self-worth and a decrease in depression.
Reminiscence and adaptation to critical life events in older adults with mild to moderate depressive symptoms

NARCIS (Netherlands)

Korte, J.; Bohlmeijer, Ernst Thomas; Westerhof, Gerben Johan; Pot, Anne Margriet

2011-01-01

Objectives: The role of reminiscence as a way of adapting to critical life events and chronic medical conditions was investigated in older adults with mild to moderate depressive symptoms. Reminiscence is the (non)volitional act or process of recollecting memories of one's self in the past. Method:
Aplasia cutis congenita reminiscent of the lines of Blaschko

NARCIS (Netherlands)

Hennekam, R. C.

1992-01-01

A male newborn showing congenital symmetrical abdominal skin defects and an alopecia on the scalp following a spiral pattern is described. The pattern of distribution of both skin anomalies was reminiscent of the lines of Blaschko, indicating that somatic mosaicism is the most probable cause for the
Group integrative reminiscence therapy on self-esteem, life satisfaction and depressive symptoms in institutionalised older veterans.

Science.gov (United States)

Wu, Li-Fen

2011-08-01

The purpose of this study was to use group integrative reminiscence as a nursing intervention to evaluate the immediate effects on self-esteem, life satisfaction and depressive symptoms for a special group named 'institutionalised older veterans' after a 12-week intervention. The study group comprised institutionalised older veterans with combat experience, including being wounded in war and who were twice forced to relocate. The group participants had lower life satisfaction, and greater use for mental health services and greater non-specific health complaints were reported from this group. Reminiscence therapy has been considered an effective nursing intervention, but the effects on institutionalised older veterans have not been studied. A quasi-experimental design and purposive sampling were conducted. A total of 74 participants were studied with pre- and post-tests to measure the effect of group integrative reminiscence therapy. The activity was held once weekly for 12 weeks. The Life Satisfaction Index A, self-esteem scale and Geriatric Depression Scale Short Form were used as research tools, and the t-test, Fisher's exact test and generalised estimating equation were used for data analysis. All participants were male, with an average age of 81·34 years old, 91·9% unmarried and were in bad health. After 12 weeks of intervention, the reminiscence groups significantly improved their self-esteem and life satisfaction and decreased depressive symptoms compared with control groups. Group integrative reminiscence revealed immediate effects on improving the self-esteem and life satisfaction of institutionalised older veterans, and depressive symptoms were also decreased. Moreover, a sense of positive self-value and belonging to the institution was produced. Group integrative reminiscence is an applicable nursing intervention for vulnerable persons such as institutionalised older veterans. A structured protocol based on the characteristics of the residents and the
Effects of group reminiscence on elderly depression: A meta-analysis

Directory of Open Access Journals (Sweden)

Dan Song

2014-12-01

Conclusion: Group reminiscence was associated with short-term depression relief among elderly patients with depression and effectively improved self-esteem and life satisfaction. Higher-quality large-scale randomised controlled trials are needed to confirm these findings.
Development of Dual-Retrieval Processes in Recall: Learning, Forgetting, and Reminiscence

Science.gov (United States)

Brainerd, C. J.; Aydin, C.; Reyna, V. F.

2012-01-01

We investigated the development of dual-retrieval processes with a low-burden paradigm that is suitable for research with children and neurocognitively impaired populations (e.g., older adults with mild cognitive impairment or dementia). Rich quantitative information can be obtained about recollection, reconstruction, and familiarity judgment by defining a Markov model over simple recall tasks like those that are used in clinical neuropsychology batteries. The model measures these processes separately for learning, forgetting, and reminiscence. We implemented this procedure in some developmental experiments, whose aims were (a) to measure age changes in recollective and nonrecollective retrieval during learning, forgetting, and reminiscence and (b) to measure age changes in content dimensions (e.g., taxonomic relatedness) that affect the two forms of retrieval. The model provided excellent fits in all three domains. Concerning (a), recollection, reconstruction, and familiarity judgment all improved during the child-to-adolescent age range in the learning domain, whereas only recollection improved in the forgetting domain, and the processes were age-invariant in the reminiscence domain. Concerning (b), although some elements of the adult pattern of taxonomic relatedness effects were detected by early adolescence, the adult pattern differs qualitatively from corresponding patterns in children and adolescents. PMID:22778491
The Effect of Reminiscence Therapy on Elderly Mental Health

Directory of Open Access Journals (Sweden)

Sepideh Moradinejad

2010-10-01

Full Text Available Objectives: The aim of this study was to determine the effect of reminiscence Abstract therapy on elderly mental health. Methods & Materials: This was a quasi-experimental study .The sample was consisted of 57 elderly men and women who were residing in the HASHEMI NEJAD institution, were selected by stratified random sampling. Inclusion criteria were: 1 65 years of age or more, 2 Mental health score between 0-66.6, 3 Speaking in Farsi, 4 Listening and speaking ability acceptable to participate in meetings, 5 Full-time life in nursing home, 6 No history of psychiatric hospitalization and psychiatric treatment and grief experience during the past 6 months, 7 Willingness to participate in research, 8 orientation of data/place/person, 9 At least six months staying in the nursing home, 10 Not receiving any treatment that disturbed the mental ability or memory, or thought Mental health level of subjects was assessed with the use of the 28-item Goldberg General Health Questionnaire. The intervention consisted of 8 reminiscence sessions, twice in a week, for one hour and half. In these sessions the elderly told their good memories. The data were analyzed by spss16 software and compared by t-test. Results: Findings of this study showed significant difference between pre and post test scores in all mental health dimensions (somatic symptom, anxiety and insomnia, social function and depressionand in total scores (P=0.001. Conclusion: Considering the results of this study, it is suggested that reminiscence therapy is effective on the elderly mental health improvement. Therefore we can use this easy, practicable and low cost technique in all nursing home.
Developing a structured education reminiscence-based programme for staff in long-stay care facilities in Ireland.

Science.gov (United States)

Cooney, Adeline; O'Shea, Eamon; Casey, Dympna; Murphy, Kathy; Dempsey, Laura; Smyth, Siobhan; Hunter, Andrew; Murphy, Edel; Devane, Declan; Jordan, Fionnuala

2013-07-01

This paper describes the steps used in developing and piloting a structured education programme - the Structured Education Reminiscence-based Programme for Staff (SERPS). The programme aimed to prepare nurses and care assistants to use reminiscence when caring for people with dementia living in long-term care. Reminiscence involves facilitating people to talk or think about their past. Structured education programmes are used widely as interventions in randomised controlled trials. However, the process of developing a structured education programme has received little attention relative to that given to evaluating the effectiveness of such programmes. This paper makes explicit the steps followed to develop the SERPS, thereby making a contribution to the methodology of designing and implementing effective structured education programmes. The approach to designing the SERPS was informed by the Van Meijel et al. (2004) model (Journal of Advanced Nursing 48, 84): (1) problem definition, (2) accumulation of building blocks for intervention design, (3) intervention design and (4) intervention validation. Grounded theory was used (1) to generate data to shape the 'building blocks' for the SERPS and (2) to explore residents, family and staff's experience of using/receiving reminiscence. Analysis of the pilot data indicated that the programme met its objective of preparing staff to use reminiscence with residents with dementia. Staff were positive both about the SERPS and the use of reminiscence with residents with dementia. This paper outlines a systematic approach to developing and validating a structured education programme. Participation in a structured education programme is more positive for staff if they are expected to actively implement what they have learnt. Ongoing support during the delivery of the programme is important for successful implementation. The incorporation of client and professional experience in the design phase is a key strength of this approach
Computer Texture Mapping for Laser Texturing of Injection Mold

Directory of Open Access Journals (Sweden)

Yongquan Zhou

2014-04-01

Full Text Available Laser texturing is a relatively new multiprocess technique that has been used for machining 3D curved surfaces; it is more flexible and efficient to create decorative texture on 3D curved surfaces of injection molds so as to improve the surface quality and achieve cosmetic surface of molded plastic parts. In this paper, a novel method of laser texturing 3D curved surface based on 3-axis galvanometer scanning unit has been presented to prevent the texturing of injection mold surface from much distortion which is often caused by traditional texturing processes. The novel method has been based on the computer texture mapping technology which has been developed and presented. The developed texture mapping algorithm includes surface triangulation, notations, distortion measurement, control, and numerical method. An interface of computer texture mapping has been built to implement the algorithm of texture mapping approach to controlled distortion rate of 3D texture math model from 2D original texture applied to curvature surface. Through a case study of laser texturing of a high curvature surface of injection mold of a mice top case, it shows that the novel method of laser texturing meets the quality standard of laser texturing of injection mold.
Ion-beam texturing of uniaxially textured Ni films

International Nuclear Information System (INIS)

Park, S.J.; Norton, D.P.; Selvamanickam, Venkat

2005-01-01

The formation of biaxial texture in uniaxially textured Ni thin films via Ar-ion irradiation is reported. The ion-beam irradiation was not simultaneous with deposition. Instead, the ion beam irradiates the uniaxially textured film surface with no impinging deposition flux, which differs from conventional ion-beam-assisted deposition. The uniaxial texture is established via a nonion beam process, with the in-plane texture imposed on the uniaxial film via ion beam bombardment. Within this sequential ion beam texturing method, grain alignment is driven by selective etching and grain overgrowth
Recalling Memories Through Reminiscence Theatre

Directory of Open Access Journals (Sweden)

Rikke Gürgens Gjærum

2013-12-01

Full Text Available The purpose of this article is to study how a reminiscence theatre production develops dramaturgically, and to discuss what impact it has on the participants who take part in the project “The aged as a resource”. The theatre performance Number Our Days is visually and verbally presented and interpreted in this article. The reader also gets an opportunity to look at film extracts from the performance in electronic form. The theoretical framing is based on a performative mindset, Ryum’s dramaturgic model, Ranciere’s view on the emancipated spectator, Turner and Behrndt’s devising theatre universe, Saldana’s ethnodrama method and Ricoeur’s perspective of the capable and relational human being who builds their own narrative identity through communication.
The Effect of Group Reminiscence Therapy on Depression of Elderly

Directory of Open Access Journals (Sweden)

SH Nemati Dehkordi

2008-12-01

Full Text Available ABSTRACT Introduction & objective: Global investigations show that the elderly population is increasing because of the health care developments. However, this group is continuously experiencing health problems for example, depression is one of their major problems. The aim of the present study is to determine the effect of group reminiscence therapy on depression of elderly resident of Shahrekord, Iran. Methods and Materials: This is a clinical trial study. The sample was consisted of 64 elderly referring to retirement centre in Shahrekord in 1385 that were selected by convenience sampling, and then divided randomly into two groups: an experimental and a control group. Group reminiscence meetings for experimental group and group meetings for control group were formed each 8 session for one hour and a half. Depression level of investigated subjects’ pre and post intervention were assessed with the use of Geriatric Depression Scale. Descriptive and conceptual statistics were used for data analysis (Chi-square Test, mean - standard deviation- Paired t-test. Results: Findings of this study showed a significant difference between pre and post intervention, where the elderly depression mean score in experimental group changed from 17.95 to 12.99 (p=0.04 but no significant difference were observed in the control group. Conclusion: Considering the result of this study, it can be suggested that group reminiscence therapy is effective on the reduction of elderly depression level. Therefore, we can use this forgotten, easy and practicable and cheap technique in all nursing-homes and even at home.
Prediction of the Reminiscence Functions in Older Adults on the Basis of the Five Personality Factor Model

Directory of Open Access Journals (Sweden)

Azam Farmani

2014-07-01

Full Text Available Objectives: The aim of the present study is to examine the prediction of the reminiscence functions in older adults on the basis of the five personality factor model. Methods & Materials: 242 elderly adults older than 60 were recruited from retirement clubs of the city of Shiraz via available sampling method. The participants completed the Reminiscence Functions Scale and Goldberg's International Personality Item Pool. Forty participants were deleted from the sample because they did not complete the questionnaires fully. All the participants took part in the study with their conscious consent. To conduct the necessary descriptive and inferential statistical operations, SPSS (Version 16 was used. Mean, standard deviation and Pearson correlation coefficient were utilized to analyze the data in the descriptive statistics section, And in inferential statistics section, simultaneous multiple regression was used to predict reminiscence functions. Results: According to the results of the multiple regression analysis, Neuroticism predicted the reminiscence functions of Bitterness Revival (β=0.28, P≤0.001 and Intimacy Maintenance (β=0.25, P≤0.001 and Extraversion predicted the reminiscence functions of Teach/Inform (β=0.18, P<0.05. Conclusion: The results indicated that people with higher levels of psychological distress tend to rehash and ruminate on bitter memories and hold onto memories of intimate social relations who are no longer part of their lives. Moreover, extravert people tend to share memories to transmit a lesson of life and share personal ideologies and experiences. Clinicians should focus on more adaptive functions of reminiscence (e.g., identity, problem solving and teach/inform and teach such functions.
Application of reminiscence treatment on older people with dementia: a case study in Pingtung, Taiwan.

Science.gov (United States)

Huang, Song-Lin; Li, Chih-Ming; Yang, Chiu-Yen; Chen, Jia-Jin J

2009-06-01

Reminiscence therapy has been utilized for many years in the treatment of dementia in older people. Purposes of the research included examining different methods of promoting interactivity, social participation, cognitive function improvement in those with dementia, and the effectiveness in reducing symptoms of depression following group treatment. This study used pretest and posttest electroencephalography (EEG) measurements to test reminiscence therapy efficacy on participants. This research organized a social group work with 12 elderly clients with dementia (mild to moderate stage) selected from among 90 residents of an older persons care facility in Pingtung. Eleven agreed to join the study, and 10 completed successfully all treatment sessions. Eight sessions of reminiscence cooking lessons were conducted. The effectiveness of interventions was evaluated by comparing presession and postsession EEG, mental health status, depression scale, and feeling of participation scale scores. Significant differences in values, particularly for EEG, were found between the two sets of scores. The average value of participants' fast waves rose from 43.88 to 55.12, whereas average slow-wave values fell from 56.12 to 44.13. After analysis using the Wilcoxon matched paired signed rank test, significant differences were noted. Findings and suggestions include the following: (a) The rise in Mini-Mental State Examination and reduction in depression scale scores, although noted, were not significant, and (b) the self-achievement, emotional stability, family atmosphere, and physical needs of participants were met. The authors recommend that reminiscence group work be promoted in the home for older persons and that childhood cooking sessions twice each week may be the ideal format for reminiscence group work.
Effectiveness of group reminiscence for improving wellbeing of institutionalized elderly adults: study protocol for a randomized controlled trial.

Science.gov (United States)

Gaggioli, Andrea; Scaratti, Chiara; Morganti, Luca; Stramba-Badiale, Marco; Agostoni, Monica; Spatola, Chiara A M; Molinari, Enrico; Cipresso, Pietro; Riva, Giuseppe

2014-10-25

Group reminiscence therapy is a brief and structured intervention in which participants share personal past events with peers. This approach has been shown to be promising for improving wellbeing and reducing depressive symptoms among institutionalized older adults. However, despite the considerable interest in reminiscence group therapy, controlled studies to determine its specific benefits as compared to generic social interactions with peers (group conversations about everyday subjects) are still lacking. We have designed a randomized controlled trial aimed at comparing the effects of group reminiscence therapy with those of group recreational activity on the psychological wellbeing of an institutionalized sample of older adults. The study includes two groups of 20 hospitalized elderly participants: the experimental group and the control group. Participants included in the experimental group will receive six sessions of group reminiscence therapy, while the control group will participate in a recreational group discussion. A repeated-measures design will be used post-intervention and three months post-intervention to evaluate changes in self-reported outcome measures of depressive symptoms, self-esteem, life satisfaction, and quality of life from baseline. The protocol of a study aimed at examining the specific effects of group reminiscence therapy on psychological wellbeing, depression, and quality of life among institutionalized elderly people is described. It is expected that the outcomes of this trial will contribute to our knowledge about the process of group reminiscence, evaluate its effectiveness in improving psychological wellbeing of institutionalized individuals, and identify the best conditions for optimizing this approach. This trial was registered with ClinicalTrials.gov (registration number: NCT02077153) on 31 January 2014.
Reminiscence functions and the health of Israeli Holocaust survivors as compared to other older Israelis and older Canadians.

Science.gov (United States)

O'Rourke, Norm; Bachner, Yaacov G; Cappeliez, Philippe; Chaudhury, Habib; Carmel, Sara

2015-01-01

Existing research with English-speaking samples indicates that various ways in which older adults recall their past affect both their physical and mental health. Self-positive reminiscence functions (i.e. identity, problem-solving, death preparation) correlate and predict mental health in later life whereas self-negative functions (i.e. bitterness revival, boredom reduction, intimacy maintenance) correlate and predict the physical health of older adults. For this study, we recruited 295 Israeli Holocaust survivors to ascertain if early life trauma affects these associations between reminiscence and health. In order to distinguish cross-national differences from survivor-specific effects, we also recruited two comparative samples of other older Israelis (not Holocaust survivors; n = 205) and a second comparative sample of 335 older Canadians. Three separate structural equation models were computed to replicate this tripartite reminiscence and health model. Coefficients for self-negative functions significantly differed between survivors and both Canadians and other older Israelis, and between Canadians and both Israeli samples. However, no differences were found between prosocial and self-positive functions. Moreover, the higher order structure of reminiscence and health appears largely indistinguishable across these three groups. Early life trauma does not appear to fundamentally affect associations between reminiscence and health. These findings underscore the resilience of Holocaust survivors.
The experience of family carers attending a joint reminiscence group with people with dementia: A thematic analysis.

Science.gov (United States)

Melunsky, Nina; Crellin, Nadia; Dudzinski, Emma; Orrell, Martin; Wenborn, Jennifer; Poland, Fiona; Woods, Bob; Charlesworth, Georgina

2015-11-01

Reminiscence therapy has the potential to improve quality of life for people with dementia. In recent years reminiscence groups have extended to include family members, but carers' experience of attending joint sessions is undocumented. This qualitative study explored the experience of 18 family carers attending 'Remembering Yesterday Caring Today' groups. Semi-structured interviews were transcribed and subjected to thematic analysis. Five themes were identified: experiencing carer support; shared experience; expectations (met and unmet), carer perspectives of the person with dementia's experience; and learning and comparing. Family carers' experiences varied, with some experiencing the intervention as entirely positive whereas others had more mixed feelings. Negative aspects included the lack of respite from their relative, the lack of emphasis on their own needs, and experiencing additional stress and guilt through not being able to implement newly acquired skills. These findings may explain the failure of a recent trial of joint reminiscence groups to replicate previous findings of positive benefit. More targeted research within subgroups of carers is required to justify the continued use of joint reminiscence groups in dementia care. © The Author(s) 2013.
[The Effect of Structured Group Reminiscence Therapy on the Life Satisfaction of Institutionalized Elderly].

Science.gov (United States)

Chen, Shu-Mei; Kuo, Chien-Lin; Chen, Mei-Rong; Lee, Lai-Ling; Lee, Pi-Yueh; Wang, Shu-Fen

2016-08-01

Long-term care institutions have become an option for older people who are dependent in daily living. However, insufficient attention has been focused on assessing the life satisfaction of those currently residing in these institutions in Taiwan. Previous research indicates that group reminiscence may improve the life satisfaction of older adults. However, there is currently no consensus regarding the implementation and evaluation of reminiscence interventions. To examine the effect of a structured group reminiscence protocol on the life satisfaction of institutionalized older adults. The study used a quasi-experimental design. A total of 48 older adults were conveniently recruited from two long-term care institutions in southern Taiwan. The experimental group (n = 23) received 8 weeks of structured-group reminiscence for 40 minutes weekly, while the control group (n = 25) received routine care from the institution. Both groups were evaluated using a life-satisfaction questionnaire before and after the intervention and again four weeks later. Life satisfaction scores were statistically similar on the pre-test and significantly different on both post-test questionnaires for the two groups. The scores for the experimental and control groups were pre-test: 24.22 vs 23.36 (p = .063); post-test I: 27.22 vs 23.32 (p < .001); and post-test II: 26.43 vs 23.00 (p < .001). The mean post-test scores for the experimental group were significantly higher than the pre-test score (p < .001). The generalized estimating equation test showed that the overall score of life satisfaction for the experimental group increased by 0.85-points (p = .042) more than the control group, which is a significant difference. The results support that the 8-week structured group reminiscence protocol effectively enhances life satisfaction in older adults. The results of this study may be referenced in the continuing education of nurses working in long-term care institutions in the context of helping

The Effect of Narrative Reminiscence on Happiness of Elderly Women.

Science.gov (United States)

Yousefi, Zahra; Sharifi, Khadijeh; Tagharrobi, Zahra; Akbari, Hossien

2015-11-01

Happiness has a considerable impact on elderly quality of life. Reminiscence therapy can be an effective intervention in increasing the positive emotions among elderly. This study was performed to investigate the effect of reminiscence therapy on Iranian elderly women's happiness. This randomized clinical trial conducted on 32 elderly women (census sampling) attending the jahandidegan daycare elderly center IN Gorgan city, Iran, in 2013. Happiness scores of 4 phases were measured: before, the third session, the sixth session and one month after the intervention. Three instruments were used in this study including a demographic questionnaire, the mini mental state examination test, and Oxford happiness questionnaire. The intervention group participated in six sessions of narrative group reminiscence that were held in three consecutive weeks, two sessions per week. The control group was also participated in six sessions of group discussions that were held in three consecutive weeks, two sessions per week. Data analysis was performed the chi-square, independent t-test, Paired t-test. From a total of 32 elderly women, 29 cases completed the study. No significant differences were found between the two groups in terms of demographic characteristics. The mean happiness scores before the intervention between the two groups were not significantly different (P = 0.824). Comparison of the mean happiness scores of the intervention group in the four measurement times revealed a significant difference only after the third and sixth sessions (P = 0.03), and no significant difference was found between the mean happiness scores of the control group in the four measurement times. The elderly participating in the matched group sessions can be effective in increasing positive emotions.
How to Make Reminiscence Movies: A Project-Based Gerontology Course

Science.gov (United States)

Yancura, Loriena A.

2013-01-01

One key to successful gerontological education lies in teaching students to integrate information from diverse academic disciplines into practical contexts. This article describes a project-based course within which students learn to integrate theories by working with older adult partners to make reminiscence movies based on an important event or…
Effects of Group Reminiscence Therapy on Disability of Nursing Home Residents in Mashhad –Iran 1390

Directory of Open Access Journals (Sweden)

Hadi Kooshyar

2012-10-01

Full Text Available Objectives: Examine the effects of group reminiscence therapy on disability of nursing home residents in Mashhad -Iran. Methods & Materials: In this semi-experimental study, 56 residents of nursing homes in Mashhad –Iran were selected by convenience sampling. Subjects in each nursing home randomly assigned to reminiscence group therapy (30 and control group (26. Thus six groups with 4-8 members were made. Reminiscence group therapy was done one hour weekly for eight weeks. Disability, depression, cognitive function, and pain were measured by World Health Organization Disability Assessment Schedule II (WHODAS II, 15-Item Geriatric Depression Scale (GDS-15, Mini Mental State Examination (MMSE and Visual Analogue Scale (VAS respectively. SPSS version 11.5 and parametric and non-parametric tests were used for data analysis. Results: The result of ANOVA and Mann-Whitney tests showed there was no significant difference about total disability score (P=0.94 and its subscales: communication and understanding (P=0.20, getting around (P=0.20, self-care (P=0.92, dealing with other (P=0.72, and participation (P=0.88 between experimental and control group. Conclusion: One hour weekly group reminiscence therapy for eight weeks can't reduce disability and its subdivisions in nursing home residents. Therefore we advise further studies in this field.
The effects of reminiscence therapy on depressive symptoms of Chinese elderly: study protocol of a randomized controlled trial

Directory of Open Access Journals (Sweden)

Chen Ting-ji

2012-11-01

Full Text Available Abstract Background Depression is one of the most common mental disorders with a high prevalence among the older adults. In recent years, after realizing some side effects of the antidepressants, non-pharmacological psychological treatments begin to attract accruing attention. Reminiscence therapy is one of the psychological treatments that specially designed for the elderly to improve their mental health status by recalling and assessing their existing memory. Though some studies indicate reminiscence therapy can be effective and beneficial for the mental health of elderly, the conclusions are not consistent yet. The aim of this research is to assess the effectiveness of reminiscence therapy for Chinese elderly. Methods Sixty older adults (≥60 years of age with mild to moderate depression will be randomly assigned to an experimental or a control condition. The participants in the experiment group will receive the reminiscence therapy under the Watt’s protocol with adaptation to Chinese Culture which consists of six weekly sessions of 90 minutes each. The control group will be treated as before. An assessor who is blind to intervention will conduct the measures before treatment, after treatment immediately, and three months after treatment. Discussion This study will provide the evidence whether the reminiscence therapy is effective to treat depressive symptoms of Chinese elderly. This research has been registered in the clinicaltrials.gov (NCT01553669.
The effects of group reminiscence therapy on depression, self esteem, and life satisfaction of elderly nursing home residents.

Science.gov (United States)

Chao, Shu-Yuan; Liu, Hsing-Yuan; Wu, Chiu-Yen; Jin, Suh-Fen; Chu, Tsung-Lan; Huang, Tzu-Shin; Clark, Mary Jo

2006-03-01

The need to provide quality mental health care for elders in nursing home settings has been a critical issue, as the aging population grows rapidly and institutional care becomes a necessity for some elders. The purpose of this quasi-experimental study was to describe the effect of participation in reminiscence group therapy on older nursing home residents' depression, self-esteem, and life satisfaction. Purposive sampling was used to recruit participants who met the study criteria. Residents of one ward were assigned to the reminiscence therapy group intervention, while residents of the other ward served as controls. Nine weekly one-hour sessions were designed to elicit reminiscence as group therapy for 12 elders in the experimental group. Another 12 elders were recruited for a control group matched to experimental subjects on relevant criteria. Depression, self-esteem, and life satisfaction were measured one week before and after the therapy. The Statistical Package for the Social Sciences (SPSS, Version 10.0) was used to analyze data. Results indicated that group reminiscence therapy significantly improved self-esteem, although effects on depression and life satisfaction were not significant. Reminiscence groups could enhance elders' social interaction with one another in nursing home settings and become support groups for participants. The model we created here can serve as a reference for future application in institutional care.
Recent advances in understanding the reminiscence bump

DEFF Research Database (Denmark)

Koppel, Jonathan; Rubin, David C.

2016-01-01

The reminiscence bump is the increased proportion of autobiographical memories from youth and early adulthood observed in adults over 40. It is one of the most robust findings in autobiographical-memory research. Although described as a single period from which there are more memories, a recent...... meta-analysis that reported the beginning and ending ages of the bump from individual studies found that different classes of cues produce distinct bumps that vary in size and temporal location. The bump obtained in response to cue words is both smaller and located earlier in the life span than...
Importance of Surface Texture to Infrared Remote Sensing Interpretations

Science.gov (United States)

Kirkland, L. E.; Adams, P. M.; Herr, K. C.; Salisbury, J. W.

2001-11-01

Thermal infrared remote sensing may be used to identify minerals present on the surface using diagnostic spectral bands. As band depth (spectral contrast) exhibited by the mineral increases, the mineral is easier to detect. In order to determine the expected spectral contrast, thermal infrared spectra of typical mineral endmembers are commonly measured in the laboratory. For example, for calcite, well-crystalline limestone is commonly studied. However, carbonates occur in several forms, including thin coatings, indurated carbonate (calcrete), and hot springs deposits. Different formation pathways may cause different microstructures and surface textures. This in turn can also affect the surface texture of the weathered material. Different surface textures can affect the measured band contrast, through roughness that causes a cavity (hohlraum) effect, and particle size and roughness on a scale that causes volume scattering. Thus since detection limits vary with the spectral contrast, surface texture can be an important variable in how detectable a mineral is. To study these issues, we have examined limestone and calcrete deposits at Mormon Mesa, Nevada that have two distinctly different microstructures and surface texture [Kirkland et al., 2001]. The limestone studied has larger grains and the grains frequently have flat, smooth surfaces on the order of 10-50 microns in cross-section length. The calcrete has smaller, more angular calcite grains, which exhibit almost no flat surfaces longer than 5 microns in cross-section length. We will show scanning electron microscope images to compare the different microstructures and surface textures of both the fresh and weathered surfaces, and we will show corresponding thermal infrared spectra to illustrate the different spectral signatures. The results demonstrate the importance of understanding the microstructure of mineral deposits to accurately interpret infrared remote sensing data, especially for studies that lack ground
The Effect of Reminiscence Group Work on Life Satisfaction, Self-Esteem and Mood of Ageing People with Intellectual Disabilities

Science.gov (United States)

Van Puyenbroeck, Joris; Maes, Bea

2009-01-01

Background: This study evaluates the effects of reminiscence group work on the subjective well-being of ageing people with intellectual disabilities. Methods: The content of the successive group work sessions was manipulated as follows: a control-phase with three "current topics" sessions, an experimental phase with six "reminiscence" sessions and…
LOCAL TEXTURE DESCRIPTION FRAMEWORK FOR TEXTURE BASED FACE RECOGNITION

Directory of Open Access Journals (Sweden)

R. Reena Rose

2014-02-01

Full Text Available Texture descriptors have an important role in recognizing face images. However, almost all the existing local texture descriptors use nearest neighbors to encode a texture pattern around a pixel. But in face images, most of the pixels have similar characteristics with that of its nearest neighbors because the skin covers large area in a face and the skin tone at neighboring regions are same. Therefore this paper presents a general framework called Local Texture Description Framework that uses only eight pixels which are at certain distance apart either circular or elliptical from the referenced pixel. Local texture description can be done using the foundation of any existing local texture descriptors. In this paper, the performance of the proposed framework is verified with three existing local texture descriptors Local Binary Pattern (LBP, Local Texture Pattern (LTP and Local Tetra Patterns (LTrPs for the five issues viz. facial expression, partial occlusion, illumination variation, pose variation and general recognition. Five benchmark databases JAFFE, Essex, Indian faces, AT&T and Georgia Tech are used for the experiments. Experimental results demonstrate that even with less number of patterns, the proposed framework could achieve higher recognition accuracy than that of their base models.
Socialization of Past Event Talk: Cultural Differences in Maternal Elaborative Reminiscing

Science.gov (United States)

Tougu, Pirko; Tulviste, Tiia; Schroder, Lisa; Keller, Heidi; De Geer, Boel

2011-01-01

This study examines mother-child reminiscing conversations with respect to variation in use and function of mothers' elaborations, the nature of children's memory elaborations, and the connections between the two, in three Western middle-class cultures where autonomy is valued over relatedness. Mothers participated with their 4-year-old children…
When Reminiscence is Harmful: The Relationship Between Self-Negative Reminiscence Functions, Need Satisfaction, and Depressive Symptoms Among Elderly People from Cameroon, the Czech Republic, and Germany

Czech Academy of Sciences Publication Activity Database

Hofer, J.; Busch, H.; Poláčková Šolcová, Iva; Tavel, P.

2017-01-01

Roč. 18, č. 2 (2017), s. 389-407 ISSN 1389-4978 R&D Projects: GA ČR(CZ) GP14-02889P; GA ČR GA17-02634S Institutional support: RVO:68081740 Keywords : Reminiscence * Self-negative functions * Depression * Need satisfaction * Old age * Culture Subject RIV: AN - Psychology OBOR OECD: Cognitive sciences Impact factor: 2.327, year: 2016
Ion beam texturing

Science.gov (United States)

Hudson, W. R.

1977-01-01

A microscopic surface texture was created by sputter-etching a surface while simultaneously sputter-depositing a lower sputter yield material onto the surface. A xenon ion-beam source was used to perform the texturing process on samples as large as 3-cm diameter. Textured surfaces have been characterized with SEM photomicrographs for a large number of materials including Cu, Al, Si, Ti, Ni, Fe, stainless steel, Au, and Ag. A number of texturing parameters are studied including the variation of texture with ion-beam powder, surface temperature, and the rate of texture growth with sputter etching time.
Emergent chirality in the electric polarization texture of titanate superlattices.

Science.gov (United States)

Shafer, Padraic; García-Fernández, Pablo; Aguado-Puente, Pablo; Damodaran, Anoop R; Yadav, Ajay K; Nelson, Christopher T; Hsu, Shang-Lin; Wojdeł, Jacek C; Íñiguez, Jorge; Martin, Lane W; Arenholz, Elke; Junquera, Javier; Ramesh, Ramamoorthy

2018-01-30

Chirality is a geometrical property by which an object is not superimposable onto its mirror image, thereby imparting a handedness. Chirality determines many important properties in nature-from the strength of the weak interactions according to the electroweak theory in particle physics to the binding of enzymes with naturally occurring amino acids or sugars, reactions that are fundamental for life. In condensed matter physics, the prediction of topologically protected magnetic skyrmions and related spin textures in chiral magnets has stimulated significant research. If the magnetic dipoles were replaced by their electrical counterparts, then electrically controllable chiral devices could be designed. Complex oxide BaTiO 3 /SrTiO 3 nanocomposites and PbTiO 3 /SrTiO 3 superlattices are perfect candidates, since "polar vortices," in which a continuous rotation of ferroelectric polarization spontaneously forms, have been recently discovered. Using resonant soft X-ray diffraction, we report the observation of a strong circular dichroism from the interaction between circularly polarized light and the chiral electric polarization texture that emerges in PbTiO 3 /SrTiO 3 superlattices. This hallmark of chirality is explained by a helical rotation of electric polarization that second-principles simulations predict to reside within complex 3D polarization textures comprising ordered topological line defects. The handedness of the texture can be topologically characterized by the sign of the helicity number of the chiral line defects. This coupling between the optical and novel polar properties could be exploited to encode chiral signatures into photon or electron beams for information processing.
Collage as a Therapeutic Modality for Reminiscence in Patients with Dementia

Science.gov (United States)

Woolhiser Stallings, Jessica

2010-01-01

Traditional therapy, with its emphasis on verbal communication between therapist and client, may not be appropriate for patients with dementia due to impaired cognitive and verbal abilities. This brief report presents a qualitative study on the use of collage in art therapy to aid in the process of reminiscence in individuals with dementia. Data…
Social integration, a sense of belonging and the Cenotaph Service: old soldiers reminisce about Remembrance.

Science.gov (United States)

Barron, Duncan S; Davies, Stephen P; Wiggins, Richard D

2008-07-01

This study explored how war commemorations such as the Cenotaph Service in the UK enable older veterans to benefit from a feeling of integration and belonging gained from both comradeship and acknowledgement from wider society. Focus groups preceded by a video clip of the Cenotaph Service with 45 veterans were used to discuss the significance of collective commemorations for older veterans. Findings indicated that social integration and a sense of belonging are fostered both by comradeship and societal support during collective commemorations allowing veterans to reminisce safely. Spontaneous reminiscences involving troubling memories may be processed more easily with the support, social integration and sense of belonging which occurs at collective commemorations. Many Korean War and female World War II veterans felt forgotten and socially isolated, but described gaining vicarious support via collective commemorations. Cohen and Wills' (1985) main-effects and buffering models of social support are used to discuss the findings further. Collective commemorations can be important sources of support for many older veterans. Both comradeship and societal support promote social integration and a sense of belonging (main-effects), which enabled reminiscing and processing (buffering) to occur.
The brass-type texture and its deviation from the copper-type texture

DEFF Research Database (Denmark)

Leffers, Torben; Ray, R.K.

2009-01-01

Our basic aim with the present review is to address the classical problem of the “fcc rolling texture transition” – the fact that fcc materials may, depending on material parameters and rolling conditions, develop two different types of rolling textures, the copper-type texture and the brass...... the subject and sketch our approach for dealing with it. We then recapitulate the decisive progress made during the nineteen sixties in the empirical description of the fcc rolling texture transition and in lining up a number of possible explanations. Then follows a section about experimental investigations...... of the brass-type texture after the nineteen sixties covering texture measurements and microstructural investigations. The main observations are: (1) The brass-type texture deviates from the copper-type texture from an early stage of texture development. (2) Deformation twinning has a decisive effect...
Evaluation of the effect of initial texture on the development of deformation texture

DEFF Research Database (Denmark)

Leffers, Torben; Juul Jensen, Dorte

1986-01-01

The authors describe a computer procedure which allows them to introduce experimental initial textures as starting conditions for texture simulation (instead of a theoretical random texture). They apply the procedure on two batches of copper with weak initial textures and on fine-grained and coarse......-grained aluminium with moderately strong initial textures. In copper the initial texture turns out to be too weak to have any significant effect. In aluminium the initial texture has a very significant effect on the simulated textures-similar to the effect it has on the experimental textures. However......, there are differences between the simulated and the experimental aluminium textures that can only be explained as a grain-size effect. Possible future applications of the procedure are discussed...
Mapping the future of reminiscence: a conceptual guide for research and practice

NARCIS (Netherlands)

Webster, Jeffrey Dean; Webster, Jeffrey Dean; Bohlmeijer, Ernst Thomas; Westerhof, Gerben Johan

2010-01-01

Nearly 50 years after Butler’s seminal 1963 contribution, the field of reminiscence and life review is entering a more mature stage. Isolated examples of increasingly sophisticated studies have recently emerged that can serve as a sound, cumulative data base. However, the field lacks an overarching
Interactive jewellery as memory cue : designing a sound locket for individual reminiscence

NARCIS (Netherlands)

Niemantsverdriet, K.; Versteeg, M.F.

2016-01-01

In this paper we describe the design of Memento: an interactive sound locket for individual reminiscence that triggers a similar sense of intimacy and values as its non-technological predecessor. Jewellery often forms a cue for autobiographical memory. In this work we investigate the role that
Combining fine texture and coarse color features for color texture classification

Science.gov (United States)

Wang, Junmin; Fan, Yangyu; Li, Ning

2017-11-01

Color texture classification plays an important role in computer vision applications because texture and color are two fundamental visual features. To classify the color texture via extracting discriminative color texture features in real time, we present an approach of combining the fine texture and coarse color features for color texture classification. First, the input image is transformed from RGB to HSV color space to separate texture and color information. Second, the scale-selective completed local binary count (CLBC) algorithm is introduced to extract the fine texture feature from the V component in HSV color space. Third, both H and S components are quantized at an optimal coarse level. Furthermore, the joint histogram of H and S components is calculated, which is considered as the coarse color feature. Finally, the fine texture and coarse color features are combined as the final descriptor and the nearest subspace classifier is used for classification. Experimental results on CUReT, KTH-TIPS, and New-BarkTex databases demonstrate that the proposed method achieves state-of-the-art classification performance. Moreover, the proposed method is fast enough for real-time applications.

Reminiscence Therapy Improves Cognitive Functions and Reduces Depressive Symptoms in Elderly People With Dementia: A Meta-Analysis of Randomized Controlled Trials.

Science.gov (United States)

Huang, Hui-Chuan; Chen, Yu-Ting; Chen, Pin-Yuan; Huey-Lan Hu, Sophia; Liu, Fang; Kuo, Ying-Ling; Chiu, Hsiao-Yean

2015-12-01

Cognitive function impairments and depressive symptoms are common in elderly people with dementia. Previous meta-analyses of outdated and small-scale studies have reported inconsistent results regarding the effects of reminiscence therapy on cognitive functions and depressive symptoms; therefore, we conducted a meta-analysis by including more recent randomized controlled trials (RCTs) with large sample sizes to investigate the immediate and long-term (6-10 months) effects of reminiscence therapy on cognitive functions and depressive symptoms in elderly people with dementia. Electronic databases, including PubMed, Medline, CINAHL, PsycINFO, the Cochrane Central Register of Controlled Trials, ProQuest, Google Scholar, and Chinese databases were searched to select eligible articles. Primary outcome measures included the scores of cognitive functions and depressive symptoms. In total, 12 RCT studies investigating the effects of reminiscence therapy on cognitive functions and depressive symptoms in elderly people with dementia were included. Two reviewers independently extracted data. All analyses were performed using a random-effects model. Reminiscence therapy had a small-size effect on cognitive functions (g = 0.18, 95% confidence interval [CI] 0.05-0.30) and a moderate-size effect on depressive symptoms (g = -0.49, 95% CI -0.70 to -0.28) in elderly people with dementia. Long-term effects of reminiscence therapy on cognitive functions and depressive symptoms were not confirmed. Moderator analysis revealed that institutionalized elderly people with dementia exhibited greater improvement in depressive symptoms than community-dwelling people with dementia did (g = -0.59 vs. -0.16, P = .003). This meta-analysis confirms that reminiscence therapy is effective in improving cognitive functions and depressive symptoms in elderly people with dementia. Our findings suggest that regular reminiscence therapy should be considered for inclusion as routine care for the improvement
On the pinned field image binarization for signature generation in image ownership verification method

Directory of Open Access Journals (Sweden)

Chang Hsuan

2011-01-01

Full Text Available Abstract The issue of pinned field image binarization for signature generation in the ownership verification of the protected image is investigated. The pinned field explores the texture information of the protected image and can be employed to enhance the watermark robustness. In the proposed method, four optimization schemes are utilized to determine the threshold values for transforming the pinned field into a binary feature image, which is then utilized to generate an effective signature image. Experimental results show that the utilization of optimization schemes can significantly improve the signature robustness from the previous method (Lee and Chang, Opt. Eng. 49 (9, 097005, 2010. While considering both the watermark retrieval rate and the computation speed, the genetic algorithm is strongly recommended. In addition, compared with Chang and Lin's scheme (J. Syst. Softw. 81 (7, 1118-1129, 2008, the proposed scheme also has better performance.
Training Mothers in Elaborative Reminiscing Enhances Children's Autobiographical Memory and Narrative

Science.gov (United States)

Reese, Elaine; Newcombe, Rhiannon

2007-01-01

This longitudinal intervention assessed children's memory at 2-1/2 years (short-term posttest; N = 115) and their memory and narrative at 3-1/2 years (long-term posttest; N = 100) as a function of maternal training in elaborative reminiscing when children were 1-1/2 to 2-1/2 years. At both posttests, trained mothers were more elaborative in their…
Art, Age & Health: A Research Journey about Developing Reminiscence Theatre in an Age-Exchange Project

Directory of Open Access Journals (Sweden)

Rikke Gürgens Gjærum

2013-12-01

Full Text Available In this article, the researcher studies how it is possible to develop a reminiscence theatre production in an age-exchange project, created with life stories from pensioners, and how the audience experiences the performance. The article is based on six focus group interviews with nine pensioners, a theatre production and a “reminiscence café” between the audience and the actors, arranged after the performance. The researcher designed the study, “The aged as a resource”, based on guidelines for performance ethnography, art-based research, practice-led research and artistic research, in order to combine science and art, which could be said to represent two different epistemological traditions.
TEXTURAL FRACTOGRAPHY

Directory of Open Access Journals (Sweden)

Hynek Lauschmann

2011-05-01

Full Text Available The reconstitution of the history of a fatigue process is based on the knowledge of any correspondences between the morphology of the crack surface and the velocity of the crack growth (crack growth rate - CGR. The textural fractography is oriented to mezoscopic SEM magnifications (30 to 500x. Images contain complicated textures without distinct borders. The aim is to find any characteristics of this texture, which correlate with CGR. Pre-processing of images is necessary to obtain a homogeneous texture. Three methods of textural analysis have been developed and realized as computational programs: the method based on the spectral structure of the image, the method based on a Gibbs random field (GRF model, and the method based on the idealization of light objects into a fibre process. In order to extract and analyze the fibre process, special methods - tracing fibres and a database-oriented analysis of a fibre process - have been developed.
Anamnesis of the radioimmunoassay: A historical reminiscence

Energy Technology Data Exchange (ETDEWEB)

Kallee, E

1984-01-27

Anamnesis of the Radioimmunoassay - A Historical Reminiscence: Several requirements have to be met before the first radioimmunoassay of a proteohormone (i.e., insulin) could be developed. One of these requirements was that iodination ought not substantially impair the immunologic properties of the insulin molecule. Since the reversibility of antigen adsorption to antibodies is the most important basis of all immunoassays, the adsorptive behavior of proteins first had to be studied at extremely low protein concentrations. Only after these requirements had been investigated was direct electrophoretic detection of a nonprecipitating anti-hormone antibody possible by desorption of insulin on filter paper. Later, the inaccuracy of the species specificity of insulin-binding antibodies proved to be particularly useful for the determination of insulin in human sera.
Content-based image retrieval using a signature graph and a self-organizing map

Directory of Open Access Journals (Sweden)

Van Thanh The

2016-06-01

Full Text Available In order to effectively retrieve a large database of images, a method of creating an image retrieval system CBIR (contentbased image retrieval is applied based on a binary index which aims to describe features of an image object of interest. This index is called the binary signature and builds input data for the problem of matching similar images. To extract the object of interest, we propose an image segmentation method on the basis of low-level visual features including the color and texture of the image. These features are extracted at each block of the image by the discrete wavelet frame transform and the appropriate color space. On the basis of a segmented image, we create a binary signature to describe the location, color and shape of the objects of interest. In order to match similar images, we provide a similarity measure between the images based on binary signatures. Then, we present a CBIR model which combines a signature graph and a self-organizing map to cluster and store similar images. To illustrate the proposed method, experiments on image databases are reported, including COREL,Wang and MSRDI.
Maternal Reminiscing Style during Early Childhood Predicts the Age of Adolescents' Earliest Memories

Science.gov (United States)

Jack, Fiona; MacDonald, Shelley; Reese, Elaine; Hayne, Harlene

2009-01-01

Individual differences in parental reminiscing style are hypothesized to have long-lasting effects on children's autobiographical memory development, including the age of their earliest memories. This study represents the first prospective test of this hypothesis. Conversations about past events between 17 mother-child dyads were recorded on…
Meaning in life and mastery mediate the relationship of negative reminiscence with psychological distress among older adults with mild to moderate depressive symptoms

NARCIS (Netherlands)

Korte, J.; Cappeliez, Philippe; Bohlmeijer, Ernst Thomas; Westerhof, Gerben Johan

2012-01-01

To understand the adaptive value of reminiscence, a mediational model of reminiscence was tested in a sample of older adults with mild to moderate depressive symptoms. Using structural equation modeling, we investigated if psychological resources (mastery and meaning in life) mediate the relation
An intergenerational reminiscence programme for older adults with early dementia and youth volunteers: values and challenges.

Science.gov (United States)

Chung, Jenny C C

2009-06-01

To examine the values of a reminiscence programme, adopting an intergenerational approach, on older persons with early dementia and youth volunteers. A pre- and post- one group design was adopted. Forty-nine elderly participants with early dementia and 117 youth volunteers participated in the study. Each elderly participant was assigned to two youth participants. This dyad group participated in a 12-session reminiscence programme. The youth participants acted as facilitators to prompt the elderly participants to share and discuss past events and experiences, and to support them to fabricate a personalized life-story book. An occupational therapist provided ongoing support and monitoring. The elderly participants were evaluated by the Chinese version of Mini-mental State Examination, Quality of Life-Alzheimer's Disease (QoL-AD), and Chinese version of Geriatric Depression Scale (CGDS) before and after the programme. Dementia Quiz (DQ), Rosenberg Self-Esteem Scale and a 20-item feedback questionnaire on the programme were used to evaluate the youth participants. Significant pre- and postprogramme differences were found for QoL-AD (mean change = -1.91; 95% CI = -3.18, -0.64) and CGDS (mean change = 1.86; 95% CI = 0.92, 2.80) among the elderly participants, and for DQ (mean change = -1.14; 95% CI = -2.11, -0.17) among the youth participants. Volunteers also showed positive appreciation of older persons and opined that this community service provided them an opportunity to reflect on their relationship with elderly relatives. Some volunteers, however, commented the heavy workload of the reminiscence programme. The intergenerational reminiscence programme suggests mutually beneficial values for both groups of participants. Whilst it is feasible to involve trained volunteers in the implementation of dementia-related programmes, it is essential that they are adequately trained and that ongoing support and monitoring are provided.
Creative reminiscence as an early intervention for depression: results of a pilot project.

NARCIS (Netherlands)

Bohlmeijer, E.; Valenkamp, M.; Westerhof, G.; Smit, H.F.E.; Cuijpers, P.

2005-01-01

Reminiscence may help in resolving conflicts from the past and making up the balance of one's life. Life-review may be further enhanced by the creative expression of memories in stories, poems or drawings. In this way people are encouraged to create and discover metaphors, images and stories that
Symmetric textures

International Nuclear Information System (INIS)

Ramond, P.

1993-01-01

The Wolfenstein parametrization is extended to the quark masses in the deep ultraviolet, and an algorithm to derive symmetric textures which are compatible with existing data is developed. It is found that there are only five such textures
Functions of Memory Sharing and Mother-Child Reminiscing Behaviors: Individual and Cultural Variations

Science.gov (United States)

Kulkofsky, Sarah; Wang, Qi; Koh, Jessie Bee Kim

2009-01-01

This study examined maternal beliefs about the functions of memory sharing and the relations between these beliefs and mother-child reminiscing behaviors in a cross-cultural context. Sixty-three European American and 47 Chinese mothers completed an open-ended questionnaire concerning their beliefs about the functions of parent-child memory…
Oxygen isotopic signature of CO2 from combustion processes

Directory of Open Access Journals (Sweden)

W. A. Brand

2011-02-01

Full Text Available For a comprehensive understanding of the global carbon cycle precise knowledge of all processes is necessary. Stable isotope (13C and 18O abundances provide information for the qualification and the quantification of the diverse source and sink processes. This study focuses on the δ18O signature of CO2 from combustion processes, which are widely present both naturally (wild fires, and human induced (fossil fuel combustion, biomass burning in the carbon cycle. All these combustion processes use atmospheric oxygen, of which the isotopic signature is assumed to be constant with time throughout the whole atmosphere. The combustion is generally presumed to take place at high temperatures, thus minimizing isotopic fractionation. Therefore it is generally supposed that the 18O signature of the produced CO2 is equal to that of the atmospheric oxygen. This study, however, reveals that the situation is much more complicated and that important fractionation effects do occur. From laboratory studies fractionation effects on the order of up to 26%permil; became obvious in the derived CO2 from combustion of different kinds of material, a clear differentiation of about 7‰ was also found in car exhausts which were sampled directly under ambient atmospheric conditions. We investigated a wide range of materials (both different raw materials and similar materials with different inherent 18O signature, sample geometries (e.g. texture and surface-volume ratios and combustion circumstances. We found that the main factor influencing the specific isotopic signatures of the combustion-derived CO2 and of the concomitantly released oxygen-containing side products, is the case-specific rate of combustion. This points firmly into the direction of (diffusive transport of oxygen to the reaction zone as the cause of the isotope fractionation. The original total 18O signature of the material appeared to have little influence, however, a contribution of specific bio
Association between pathology and texture features of multi parametric MRI of the prostate

Science.gov (United States)

Kuess, Peter; Andrzejewski, Piotr; Nilsson, David; Georg, Petra; Knoth, Johannes; Susani, Martin; Trygg, Johan; Helbich, Thomas H.; Polanec, Stephan H.; Georg, Dietmar; Nyholm, Tufve

2017-10-01

The role of multi-parametric (mp)MRI in the diagnosis and treatment of prostate cancer has increased considerably. An alternative to visual inspection of mpMRI is the evaluation using histogram-based (first order statistics) parameters and textural features (second order statistics). The aims of the present work were to investigate the relationship between benign and malignant sub-volumes of the prostate and textures obtained from mpMR images. The performance of tumor prediction was investigated based on the combination of histogram-based and textural parameters. Subsequently, the relative importance of mpMR images was assessed and the benefit of additional imaging analyzed. Finally, sub-structures based on the PI-RADS classification were investigated as potential regions to automatically detect maligned lesions. Twenty-five patients who received mpMRI prior to radical prostatectomy were included in the study. The imaging protocol included T2, DWI, and DCE. Delineation of tumor regions was performed based on pathological information. First and second order statistics were derived from each structure and for all image modalities. The resulting data were processed with multivariate analysis, using PCA (principal component analysis) and OPLS-DA (orthogonal partial least squares discriminant analysis) for separation of malignant and healthy tissue. PCA showed a clear difference between tumor and healthy regions in the peripheral zone for all investigated images. The predictive ability of the OPLS-DA models increased for all image modalities when first and second order statistics were combined. The predictive value reached a plateau after adding ADC and T2, and did not increase further with the addition of other image information. The present study indicates a distinct difference in the signatures between malign and benign prostate tissue. This is an absolute prerequisite for automatic tumor segmentation, but only the first step in that direction. For the specific
The effects of reminiscence on psychological well-being in older adults: A meta-analysis

NARCIS (Netherlands)

Bohlmeijer, E.; Roemer, M.; Cuijpers, P.; Smit, H.F.E.

2007-01-01

This paper presents the results of a meta-analysis to assess the effectiveness of reminiscence on psychological well-being across different target groups and treatment modalities. Fifteen controlled outcome studies were included. An overall effect size of 0.54 was found, indicating a moderate
The effects of reminiscence on psychological well-being in older adults: a meta-analysis.

NARCIS (Netherlands)

Bohlmeijer, E.; Roemer, M.; Cuijpers, P.; Smit, H.F.E.

2007-01-01

This paper presents the results of a meta-analysis to assess the effectiveness of reminiscence on psychological well-being across different target groups and treatment modalities. Fifteen controlled outcome studies were included. An overall effect size of 0.54 was found, indicating a moderate
Randomized controlled trial of a six-week spiritual reminiscence intervention on hope, life satisfaction, and spiritual well-being in elderly with mild and moderate dementia.

Science.gov (United States)

Wu, Li-Fen; Koo, Malcolm

2016-02-01

Reminiscence therapy has been reported to improve the well-being in patients with dementia. However, few studies have examined the effects of spiritual reminiscence, which emphasizes on reconnecting and enhancing the meaning of one's own experience, on patients with dementia. Therefore, this study aimed to investigate the effects of spiritual reminiscence on hope, life satisfaction, and spiritual well-being in elderly Taiwanese with mild or moderate dementia. A randomized controlled trial was conducted on 103 patients with mild or moderate dementia recruited from a medical center in central Taiwan. The patients were randomly assigned to either a 6-week spiritual reminiscence group (n = 53) or control group (n = 50). The Herth Hope Index, the Life Satisfaction Scale, the Spirituality Index of Well-Being were administered before and after the 6-week period. The interaction terms between group and time for the three outcome measures were found to be significant (P hope, life satisfaction, and spiritual well-being of elderly patients with mild or moderate dementia could significantly be improved with a 6-week spiritual reminiscence intervention. Copyright © 2015 John Wiley & Sons, Ltd.
Semantic attributes based texture generation

Science.gov (United States)

Chi, Huifang; Gan, Yanhai; Qi, Lin; Dong, Junyu; Madessa, Amanuel Hirpa

2018-04-01

Semantic attributes are commonly used for texture description. They can be used to describe the information of a texture, such as patterns, textons, distributions, brightness, and so on. Generally speaking, semantic attributes are more concrete descriptors than perceptual features. Therefore, it is practical to generate texture images from semantic attributes. In this paper, we propose to generate high-quality texture images from semantic attributes. Over the last two decades, several works have been done on texture synthesis and generation. Most of them focusing on example-based texture synthesis and procedural texture generation. Semantic attributes based texture generation still deserves more devotion. Gan et al. proposed a useful joint model for perception driven texture generation. However, perceptual features are nonobjective spatial statistics used by humans to distinguish different textures in pre-attentive situations. To give more describing information about texture appearance, semantic attributes which are more in line with human description habits are desired. In this paper, we use sigmoid cross entropy loss in an auxiliary model to provide enough information for a generator. Consequently, the discriminator is released from the relatively intractable mission of figuring out the joint distribution of condition vectors and samples. To demonstrate the validity of our method, we compare our method to Gan et al.'s method on generating textures by designing experiments on PTD and DTD. All experimental results show that our model can generate textures from semantic attributes.
Vitaly Ginzburg and high temperature superconductivity: Personal reminiscences

International Nuclear Information System (INIS)

Mazin, Igor I.

2008-01-01

This article is an attempt to give Western readers, as well as young researchers in Russia, a glance at the atmosphere in one of the leading physics institutions in the USSR from 1977-1988, through the eye of a graduate student and later a posdoc in the theory group led by Vitaly Ginzburg, arguably the most enthusiatic proponent of high-temperature superconductivity before the discovery of Bednorz and Muller. This is a very personal narration, wherein the events of my own life and career are inevitably intertwined with scientific events and with my reminiscences of great Russian physicists whom I had the pleasure to meet with while working in the 'High-Temperature Superconductivity Section' at the Lebedev Institute within the aforementioned 12 years

Personalized reminiscence therapy M-health application for patients living with dementia: Innovating using open source code repository.

Science.gov (United States)

Zhang, Melvyn W B; Ho, Roger C M

2017-01-01

Dementia is known to be an illness which brings forth marked disability amongst the elderly individuals. At times, patients living with dementia do also experience non-cognitive symptoms, and these symptoms include that of hallucinations, delusional beliefs as well as emotional liability, sexualized behaviours and aggression. According to the National Institute of Clinical Excellence (NICE) guidelines, non-pharmacological techniques are typically the first-line option prior to the consideration of adjuvant pharmacological options. Reminiscence and music therapy are thus viable options. Lazar et al. [3] previously performed a systematic review with regards to the utilization of technology to delivery reminiscence based therapy to individuals who are living with dementia and has highlighted that technology does have benefits in the delivery of reminiscence therapy. However, to date, there has been a paucity of M-health innovations in this area. In addition, most of the current innovations are not personalized for each of the person living with Dementia. Prior research has highlighted the utility for open source repository in bioinformatics study. The authors hoped to explain how they managed to tap upon and make use of open source repository in the development of a personalized M-health reminiscence therapy innovation for patients living with dementia. The availability of open source code repository has changed the way healthcare professionals and developers develop smartphone applications today. Conventionally, a long iterative process is needed in the development of native application, mainly because of the need for native programming and coding, especially so if the application needs to have interactive features or features that could be personalized. Such repository enables the rapid and cost effective development of application. Moreover, developers are also able to further innovate, as less time is spend in the iterative process.
Aesthetic Perception of Visual Textures: A Holistic Exploration using Texture Analysis, Psychological Experiment and Perception Modeling

Directory of Open Access Journals (Sweden)

Jianli eLiu

2015-11-01

Full Text Available Modeling human aesthetic perception of visual textures is important and valuable in numerous industrial domains, such as product design, architectural design and decoration. Based on results from a semantic differential rating experiment, we modeled the relationship between low-level basic texture features and aesthetic properties involved in human aesthetic texture perception. First, we compute basic texture features from textural images using four classical methods. These features are neutral, objective and independent of the socio-cultural context of the visual textures. Then, we conduct a semantic differential rating experiment to collect from evaluators their aesthetic perceptions of selected textural stimuli. In semantic differential rating experiment, eights pairs of aesthetic properties are chosen, which are strongly related to the socio-cultural context of the selected textures and to human emotions. They are easily understood and connected to everyday life. We propose a hierarchical feed-forward layer model of aesthetic texture perception and assign 8 pairs of aesthetic properties to different layers. Finally, we describe the generation of multiple linear and nonlinear regression models for aesthetic prediction by taking dimensionality-reduced texture features and aesthetic properties of visual textures as dependent and independent variables, respectively. Our experimental results indicate that the relationships between each layer and its neighbors in the hierarchical feed-forward layer model of aesthetic texture perception can be fitted well by linear functions, and the models thus generated can successfully bridge the gap between computational texture features and aesthetic texture properties.
[Visual Texture Agnosia in Humans].

Science.gov (United States)

Suzuki, Kyoko

2015-06-01

Visual object recognition requires the processing of both geometric and surface properties. Patients with occipital lesions may have visual agnosia, which is impairment in the recognition and identification of visually presented objects primarily through their geometric features. An analogous condition involving the failure to recognize an object by its texture may exist, which can be called visual texture agnosia. Here we present two cases with visual texture agnosia. Case 1 had left homonymous hemianopia and right upper quadrantanopia, along with achromatopsia, prosopagnosia, and texture agnosia, because of damage to his left ventromedial occipitotemporal cortex and right lateral occipito-temporo-parietal cortex due to multiple cerebral embolisms. Although he showed difficulty matching and naming textures of real materials, he could readily name visually presented objects by their contours. Case 2 had right lower quadrantanopia, along with impairment in stereopsis and recognition of texture in 2D images, because of subcortical hemorrhage in the left occipitotemporal region. He failed to recognize shapes based on texture information, whereas shape recognition based on contours was well preserved. Our findings, along with those of three reported cases with texture agnosia, indicate that there are separate channels for processing texture, color, and geometric features, and that the regions around the left collateral sulcus are crucial for texture processing.
Parallel-Sequential Texture Analysis

NARCIS (Netherlands)

van den Broek, Egon; Singh, Sameer; Singh, Maneesha; van Rikxoort, Eva M.; Apte, Chid; Perner, Petra

2005-01-01

Color induced texture analysis is explored, using two texture analysis techniques: the co-occurrence matrix and the color correlogram as well as color histograms. Several quantization schemes for six color spaces and the human-based 11 color quantization scheme have been applied. The VisTex texture
Feature-aware natural texture synthesis

KAUST Repository

Wu, Fuzhang

2014-12-04

This article presents a framework for natural texture synthesis and processing. This framework is motivated by the observation that given examples captured in natural scene, texture synthesis addresses a critical problem, namely, that synthesis quality can be affected adversely if the texture elements in an example display spatially varied patterns, such as perspective distortion, the composition of different sub-textures, and variations in global color pattern as a result of complex illumination. This issue is common in natural textures and is a fundamental challenge for previously developed methods. Thus, we address it from a feature point of view and propose a feature-aware approach to synthesize natural textures. The synthesis process is guided by a feature map that represents the visual characteristics of the input texture. Moreover, we present a novel adaptive initialization algorithm that can effectively avoid the repeat and verbatim copying artifacts. Our approach improves texture synthesis in many images that cannot be handled effectively with traditional technologies.
FCC Rolling Textures Reviewed in the Light of Quantitative Comparisons between Simulated and Experimental Textures

DEFF Research Database (Denmark)

Wierzbanowski, Krzysztof; Wroński, Marcin; Leffers, Torben

2014-01-01

The crystallographic texture of metallic materials has a very strong effect on the properties of the materials. In the present article, we look at the rolling textures of fcc metals and alloys, where the classical problem is the existence of two different types of texture, the "copper-type texture......" and the "brass-type texture." The type of texture developed is determined by the stacking fault energy of the material, the rolling temperature and the strain rate of the rolling process. Recent texture simulations by the present authors provide the basis for a renewed discussion of the whole field of fcc......} slip without or with deformation twinning, but we also consider slip on other slip planes and slip by partial dislocations. We consistently make quantitative comparison of the simulation results and the experimental textures by means of a scalar correlation factor. We find that the development...
Seismic texture classification. Final report

Energy Technology Data Exchange (ETDEWEB)

Vinther, R.

1997-12-31

The seismic texture classification method, is a seismic attribute that can both recognize the general reflectivity styles and locate variations from these. The seismic texture classification performs a statistic analysis for the seismic section (or volume) aiming at describing the reflectivity. Based on a set of reference reflectivities the seismic textures are classified. The result of the seismic texture classification is a display of seismic texture categories showing both the styles of reflectivity from the reference set and interpolations and extrapolations from these. The display is interpreted as statistical variations in the seismic data. The seismic texture classification is applied to seismic sections and volumes from the Danish North Sea representing both horizontal stratifications and salt diapers. The attribute succeeded in recognizing both general structure of successions and variations from these. Also, the seismic texture classification is not only able to display variations in prospective areas (1-7 sec. TWT) but can also be applied to deep seismic sections. The seismic texture classification is tested on a deep reflection seismic section (13-18 sec. TWT) from the Baltic Sea. Applied to this section the seismic texture classification succeeded in locating the Moho, which could not be located using conventional interpretation tools. The seismic texture classification is a seismic attribute which can display general reflectivity styles and deviations from these and enhance variations not found by conventional interpretation tools. (LN)
Methods of making textured catalysts

Science.gov (United States)

Werpy, Todd [West Richland, WA; Frye, Jr., John G.; Wang, Yong [Richland, WA; Zacher, Alan H [Kennewick, WA

2010-08-17

A textured catalyst having a hydrothermally-stable support, a metal oxide and a catalyst component is described. Methods of conducting aqueous phase reactions that are catalyzed by a textured catalyst are also described. The invention also provides methods of making textured catalysts and methods of making chemical products using a textured catalyst.
Dilatometry study of textures

International Nuclear Information System (INIS)

Sofrenovic, R.; Lazarevic, Dj.

1965-01-01

Presence of textures in the metal uranium fuel is harmful because of anisotropy properties of uranium during thermal treatment, and especially during irradiation. Anisotropic radiation swelling of uranium can cause deformation of fuel element due to existence of textures. The objective of this work was studying of the influence of phase transformations on textures in uranium which has undergone plastic deformation due to rotational casting. Dilatometry method was adopted for testing the textures. This report describes the device for dilatometry testing and the measured preliminary results are shown
Micro-Texture Synthesis by Phase Randomization

Directory of Open Access Journals (Sweden)

Bruno Galerne

2011-09-01

Full Text Available This contribution is concerned with texture synthesis by example, the process of generating new texture images from a given sample. The Random Phase Noise algorithm presented here synthesizes a texture from an original image by simply randomizing its Fourier phase. It is able to reproduce textures which are characterized by their Fourier modulus, namely the random phase textures (or micro-textures.
The reminiscence bump reconsidered: children's prospective life stories show a bump in young adulthood.

Science.gov (United States)

Bohn, Annette; Berntsen, Dorthe

2011-02-01

The reminiscence bump-the reporting of more memories from young adulthood than from other stages of life-is considered a hallmark of autobiographical memory research. The most prevalent explanations for this effect assume that events in young adulthood are favored because of the way they are encoded and maintained in long-term memory. Here we show that a similar increase of events in early adulthood is found when children narrate their personal futures. In Study 1, children wrote their future life stories. The events in these life stories were mostly life-script events, and their distribution showed a clear bump in young adulthood. In Study 2, children were prompted by word cues to write down events from their future lives. The events generated consisted mostly of non-life-script events, and those events did not show a bump in young adulthood. Our findings challenge prevailing explanations of the reminiscence bump and suggest that the cultural life script forms an overarching organizational principle for autobiographical memories and future representations across the life span.
Sticking out and fitting in: culture-specific predictors of 3-year-olds' autobiographical memories during joint reminiscing.

Science.gov (United States)

Schröder, Lisa; Kärtner, Joscha; Keller, Heidi; Chaudhary, Nandita

2012-12-01

The present study investigates the relationship between mother-child interaction styles with 19 months and children's autobiographical memory with 3 years of age in two cultural contexts: New Delhi, India (n = 25) and Berlin, Germany (n = 33). Results demonstrate similarities as well as culture specificities. In both contexts, maternal elaborations during reminiscing were related to children's memory contributions. Over time, maternal support for toddlers' self-expression during free play at 19 months predicted their children's memory elaborations at 3 years in the Berlin context. In the Delhi context, toddlers' willingness to carry out their mothers' requests at 19 months predicted their memory elaborations at 3 years. These results suggest different motivational bases underlying children's autobiographical memory contributions during mother-child reminiscing related to different cultural orientations. Copyright © 2012 Elsevier Inc. All rights reserved.
Height perception influenced by texture gradient.

Science.gov (United States)

Tozawa, Junko

2012-01-01

Three experiments were carried out to examine whether a texture gradient influences perception of relative object height. Previous research implicated texture cues in judgments of object width, but similar influences have not been demonstrated for relative height. In this study, I evaluate a hypothesis that the projective ratio of the number of texture elements covered by the objects combined with the ratio of the retinal object heights determines percepts of relative object height. Density of texture background was varied: four density conditions ranged from no-texture to very dense texture. In experiments 1 and 2, participants judged the height of comparison bar compared to the standard bar positioned on no-texture or textured backgrounds. Results showed relative height judgments differed with texture manipulations, consistent with predictions from a hypothesised combination of the number of texture elements with retinal height (experiment 1), or partially consistent with this hypothesis (experiment 2). In experiment 2, variations in the position of a comparison object showed that comparisons located far from the horizon were judged more poorly than in other positions. In experiment 3 I examined distance perception; relative distance judgments were found to be also affected by textured backgrounds. Results are discussed in terms of Gibson's relational theory and distance calibration theory.
Texture memory and strain-texture mapping in a NiTi shape memory alloy

International Nuclear Information System (INIS)

Ye, B.; Majumdar, B. S.; Dutta, I.

2007-01-01

The authors report on the near-reversible strain hysteresis during thermal cycling of a polycrystalline NiTi shape memory alloy at a constant stress that is below the yield strength of the martensite. In situ neutron diffraction experiments are used to demonstrate that the strain hysteresis occurs due to a texture memory effect, where the martensite develops a texture when it is cooled under load from the austenite phase and is thereafter ''remembered.'' Further, the authors quantitatively relate the texture to the strain by developing a calculated strain-texture map or pole figure for the martensite phase, and indicate its applicability in other martensitic transformations
Textured perovskite cells

NARCIS (Netherlands)

Deelen, J. van; Tezsevin, Y.; Barink, M.

2017-01-01

Most research of texturization of solar cells has been devoted to Si based cells. For perovskites, it was assumed that texturization would not have much of an impact because of the relatively low refractive indexes lead to relatively low reflection as compared to the Si based cells. However, our
Efficient rolling texture predictions and texture-sensitive thermomechanical properties of α-uranium foils

Science.gov (United States)

Steiner, Matthew A.; Klein, Robert W.; Calhoun, Christopher A.; Knezevic, Marko; Garlea, Elena; Agnew, Sean R.

2017-11-01

Finite element (FE) analysis was used to simulate the strain history of an α-uranium foil during cold straight-rolling, with the sheet modeled as an isotropic elastoplastic continuum. The resulting strain history was then used as input for a viscoplastic self-consistent (VPSC) polycrystal plasticity model to simulate crystallographic texture evolution. Mid-plane textures predicted via the combined FE→VPSC approach show alignment of the (010) poles along the rolling direction (RD), and the (001) poles along the normal direction (ND) with a symmetric splitting along RD. The surface texture is similar to that of the mid-plane, but with a shear-induced asymmetry that favors one of the RD split features of the (001) pole figure. Both the mid-plane and surface textures predicted by the FE→VPSC approach agree with published experimental results for cold straight-rolled α-uranium plates, as well as predictions made by a more computationally intensive full-field crystal plasticity based finite element model. α-uranium foils produced by cold-rolling must typically undergo a recrystallization anneal to restore ductility prior to their final application, resulting in significant texture evolution from the cold-rolled plate deformation texture. Using the texture measured from a foil in the final recrystallized state, coefficients of thermal expansion and the elastic stiffness tensors were calculated using a thermo-elastic self-consistent model, and the anisotropic yield loci and flow curves along the RD, TD, and ND were predicted using the VPSC code.
Perceptual asymmetry in texture perception.

OpenAIRE

Williams, D; Julesz, B

1992-01-01

A fundamental property of human visual perception is our ability to distinguish between textures. A concerted effort has been made to account for texture segregation in terms of linear spatial filter models and their nonlinear extensions. However, for certain texture pairs the ease of discrimination changes when the role of figure and ground are reversed. This asymmetry poses a problem for both linear and nonlinear models. We have isolated a property of texture perception that can account for...
The effect of substrate texture and oxidation temperature on oxide texture development in zirconium alloys

Energy Technology Data Exchange (ETDEWEB)

Garner, A., E-mail: alistair.garner@manchester.ac.uk [Materials Performance Centre, University of Manchester, Grosvenor Street, Manchester, M17HS (United Kingdom); Frankel, P. [Materials Performance Centre, University of Manchester, Grosvenor Street, Manchester, M17HS (United Kingdom); Partezana, J. [Westinghouse Electric Company, 1332 Beulah Road, Pittsburgh, PA 15235 (United States); Preuss, M. [Materials Performance Centre, University of Manchester, Grosvenor Street, Manchester, M17HS (United Kingdom)

2017-02-15

During corrosion of zirconium alloys a highly textured oxide is formed, the degree of this preferred orientation has previously been shown to be an important factor in determining the corrosion behaviour of these alloys. Two distinct experiments were designed in order to investigate the origin of this oxide texture development on two commercial alloys. Firstly, sheet samples of Zircaloy-4 were oxidised between 500 and 800 °C in air. The resulting monoclinic oxide texture strength was observed to decrease with increasing oxidation temperature. In a second experiment, orthogonal faces of Low Tin ZIRLO{sub ™} were oxidised in 360 °C water, providing different substrate textures but identical microstructures. The substrate texture was observed to have a negligible effect on the corrosion performance whilst the major orientation of both oxide phases was found to be independent of substrate orientation. It is concluded that the main driving force for oxide texture development in single-phase zirconium alloys is the compressive stress caused by the Zr−ZrO{sub 2} transformation. - Highlights: • Substrate orientation does not significantly affect oxide texture development. • Corrosion performance is independent of substrate texture. • Monoclinic oxide texture strength decreases with increasing oxidation temperature. • The main driving force for texture development is the oxidation-induced stress.
Signature-based User Authentication

OpenAIRE

Hámorník, Juraj

2015-01-01

This work aims on missing handwritten signature authentication in Windows. Result of this work is standalone software that allow users to log into Windows by writing signature. We focus on security of signature authentification and best overall user experience. We implemented signature authentification service that accept signature and return user access token if signature is genuine. Signature authentification is done by comparing given signature to signature patterns by their similarity. Si...
O estilo de reminiscência nas interações mãe-criança e pai-criança

OpenAIRE

Rebelo, Ana; Maia, Joana; Gatinho, Ana; Coelho, Leandra; Torres, Nuno; Veríssimo, Manuela

2016-01-01

Nas últimas décadas, a investigação na área da reminiscência adulto-criança tem-se debruçado, essencial - mente, sobre a forma como as mães conversam sobre eventos passados com os seus filhos. Contudo, mais recentemente, os investigadores têm procurado compreender a importância do pai no desenvolvi - mento da comunicação infantil. O presente estudo explora as diferenças do estilo de reminiscência nas díades mãe-criança e pai-criança, em função do sexo desta. Participaram 79 crianç...

Perceptual asymmetry in texture perception.

Science.gov (United States)

Williams, D; Julesz, B

1992-07-15

A fundamental property of human visual perception is our ability to distinguish between textures. A concerted effort has been made to account for texture segregation in terms of linear spatial filter models and their nonlinear extensions. However, for certain texture pairs the ease of discrimination changes when the role of figure and ground are reversed. This asymmetry poses a problem for both linear and nonlinear models. We have isolated a property of texture perception that can account for this asymmetry in discrimination: subjective closure. This property, which is also responsible for visual illusions, appears to be explainable by early visual processes alone. Our results force a reexamination of the process of human texture segregation and of some recent models that were introduced to explain it.
Life story chapters, specific memories and the reminiscence bump

DEFF Research Database (Denmark)

Thomsen, Dorthe Kirkegaard; Pillemer, David B.; Ivcevic, Zorana

2011-01-01

Theories of autobiographical memory posit that extended time periods (here termed chapters) and memories are organised hierarchically. If chapters organise memories and guide their recall, then chapters and memories should show similar temporal distributions over the life course. Previous research...... are over-represented at the beginning of chapters. Potential connections between chapters and the cultural life script are also examined. Adult participants first divided their life story into chapters and identified their most positive and most negative chapter. They then recalled a specific memory from...... demonstrates that positive but not negative memories show a reminiscence bump and that memories cluster at the beginning of extended time periods. The current study tested the hypotheses that (1) ages marking the beginning of positive but not negative chapters produce a bump, and that (2) specific memories...
Effectiveness of a structured education reminiscence-based programme for staff on the quality of life of residents with dementia in long-stay units: a study protocol for a cluster randomised trial.

LENUS (Irish Health Repository)

O'Shea, Eamon

2011-02-01

Current projections indicate that there will be a significant increase in the number of people with dementia in Ireland, from approximately 40,000 at present to 100,000 by 2036. Psychosocial interventions, such as reminiscence, have the potential to improve the quality of life of people with dementia. However, while reminiscence is used widely in dementia care, its impact on the quality of life of people with dementia remains largely undocumented and there is a need for a robust and fair assessment of its overall effectiveness. The DementiA education programme incorporating REminiscence for Staff study will evaluate the effectiveness of a structured reminiscence-based education programme for care staff on the quality of life of residents with dementia in long-stay units.
Gravitational effects of global textures

International Nuclear Information System (INIS)

Noetzold, D.

1990-03-01

A solution for the dynamics of global textures is obtained. Their gravitational field during the collapse and the subsequent evolution is found to be given solely by a space-time dependent ''deficit solid angle.'' The frequency shift of photons traversing this gravitational field is calculated. The space-time dependent texture metric locally contracts the volume of three-space and thereby induces overdensities in homogeneous matter distributions. There are no gravitational forces unless matter has a nonzero angular momentum with respect to the texture origin which would be the case for moving textures
Spin polarized electronic states and spin textures at the surface of oxygen-deficient SrTiO3

Science.gov (United States)

Jeschke, Harald O.; Altmeyer, Michaela; Rozenberg, Marcelo; Gabay, Marc; Valenti, Roser

We investigate the electronic structure and spin texture at the (001) surface of SrTiO3 in the presence of oxygen vacancies by means of ab initio density functional theory (DFT) calculations of slabs. Relativistic non-magnetic DFT calculations exhibit Rashba-like spin winding with a characteristic energy scale ~ 10 meV. However, when surface magnetism on the Ti ions is included, bands become spin-split with an energy difference ~ 100 meV at the Γ point. This energy scale is comparable to the observations in SARPES experiments performed on the two-dimensional electronic states confined near the (001) surface of SrTiO3. We find the spin polarized state to be the ground state of the system, and while magnetism tends to suppress the effects of the relativistic Rashba interaction, signatures of it are still clearly visible in terms of complex spin textures. We gratefully acknowledge financial support from the Deutsche Forschungsgemeinschaft through grants SFB/TR 49 and FOR 1346.
Real Traceable Signatures

Science.gov (United States)

Chow, Sherman S. M.

Traceable signature scheme extends a group signature scheme with an enhanced anonymity management mechanism. The group manager can compute a tracing trapdoor which enables anyone to test if a signature is signed by a given misbehaving user, while the only way to do so for group signatures requires revealing the signer of all signatures. Nevertheless, it is not tracing in a strict sense. For all existing schemes, T tracing agents need to recollect all N' signatures ever produced and perform RN' “checks” for R revoked users. This involves a high volume of transfer and computations. Increasing T increases the degree of parallelism for tracing but also the probability of “missing” some signatures in case some of the agents are dishonest.
Transformations in destination texture

DEFF Research Database (Denmark)

Gyimóthy, Szilvia

2018-01-01

This article takes heterogeographical approaches to understand Bollywood-induced destination transformations in Switzerland. Positioned within the theoretical field of mediatized mobility, the study contextualizes Bollywood-induced tourism in Europe the concept of texture. Textural analysis (base...
Annealing texture of rolled nickel alloys

International Nuclear Information System (INIS)

Meshchaninov, I.V.; Khayutin, S.G.

1976-01-01

A texture of pure nickel and binary alloys after the 95% rolling and annealing has been studied. Insoluble additives (Mg, Zr) slacken the cubic texture in nickel and neral slackening of the texture (Zr). In the case of alloying with silicium (up to 2%) the texture practically coinsides with that of a technical-grade nickel. The remaining soluble additives either do not change the texture of pure nickel (C, Nb) or enhance the sharpness and intensity of the cubic compontnt (Al, Cu, Mn, Cr, Mo, W, Co -at their content 0.5 to 2.0%). A model is proposed by which variation of the annealing texture upon alloying is caused by dissimilar effect of the alloying elements on the mobility of high- and low-angle grain boundaries
Temporal distribution of autobiographical memory: uncovering the reminiscence bump in Japanese young and middle-aged adults

NARCIS (Netherlands)

Kawasaki, Y.; Janssen, S.M.J.; Inoue, T.

2011-01-01

The reminiscence bump is the effect that people recall more personal events from their teenage period than from adjacent lifetime periods. The effect is generally found in studies that divide the results of participants, who were at least 40 years old, into age bins of 10 years. In this study, the
Signature Balancing

NARCIS (Netherlands)

Noordkamp, H.W.; Brink, M. van den

2006-01-01

Signatures are an important part of the design of a ship. In an ideal situation, signatures must be as low as possible. However, due to budget constraints it is most unlikely to reach this ideal situation. The arising question is which levels of signatures are optimal given the different scenarios
Laser surface texturing of tool steel: textured surfaces quality evaluation

Science.gov (United States)

Šugár, Peter; Šugárová, Jana; Frnčík, Martin

2016-05-01

In this experimental investigation the laser surface texturing of tool steel of type 90MnCrV8 has been conducted. The 5-axis highly dynamic laser precision machining centre Lasertec 80 Shape equipped with the nano-second pulsed ytterbium fibre laser and CNC system Siemens 840 D was used. The planar and spherical surfaces first prepared by turning have been textured. The regular array of spherical and ellipsoidal dimples with a different dimensions and different surface density has been created. Laser surface texturing has been realized under different combinations of process parameters: pulse frequency, pulse energy and laser beam scanning speed. The morphological characterization of ablated surfaces has been performed using scanning electron microscopy (SEM) technique. The results show limited possibility of ns pulse fibre laser application to generate different surface structures for tribological modification of metallic materials. These structures were obtained by varying the processing conditions between surface ablation, to surface remelting. In all cases the areas of molten material and re-cast layers were observed on the bottom and walls of the dimples. Beside the influence of laser beam parameters on the machined surface quality during laser machining of regular hemispherical and elipsoidal dimple texture on parabolic and hemispherical surfaces has been studied.
Predicting the Quality of Mother-Child Reminiscing Surrounding Negative Emotional Events at 42 and 48 Months Old

Science.gov (United States)

Laible, Deborah; Murphy, Tia Panfile; Augustine, Mairin

2013-01-01

Researchers have speculated that a number of factors likely predict the quality of reminiscing between preschool children and their mothers. This study was designed to investigate three such factors, including child temperament, maternal personality, and maternal caregiving representations. Seventy mothers and their preschool children were…
X-ray coherent scattering tomography of textured material (Conference Presentation)

Science.gov (United States)

Zhu, Zheyuan; Pang, Shuo

2017-05-01

Small-angle X-ray scattering (SAXS) measures the signature of angular-dependent coherently scattered X-rays, which contains richer information in material composition and structure compared to conventional absorption-based computed tomography. SAXS image reconstruction method of a 2 or 3 dimensional object based on computed tomography, termed as coherent scattering computed tomography (CSCT), enables the detection of spatially-resolved, material-specific isotropic scattering signature inside an extended object, and provides improved contrast for medical diagnosis, security screening, and material characterization applications. However, traditional CSCT methods assumes materials are fine powders or amorphous, and possess isotropic scattering profiles, which is not generally true for all materials. Anisotropic scatters cannot be captured using conventional CSCT method and result in reconstruction errors. To obtain correct information from the sample, we designed new imaging strategy which incorporates extra degree of detector motion into X-ray scattering tomography for the detection of anisotropic scattered photons from a series of two-dimensional intensity measurements. Using a table-top, narrow-band X-ray source and a panel detector, we demonstrate the anisotropic scattering profile captured from an extended object and the reconstruction of a three-dimensional object. For materials possessing a well-organized crystalline structure with certain symmetry, the scatter texture is more predictable. We will also discuss the compressive schemes and implementation of data acquisition to improve the collection efficiency and accelerate the imaging process.
Preparation of reminiscent aroma mixture of Japanese soy sauce.

Science.gov (United States)

Bonkohara, Kaori; Fuji, Maiko; Nakao, Akito; Igura, Noriyuki; Shimoda, Mitsuya

2016-01-01

To prepare an aroma mixture of Japanese soy sauce by fewest components, the aroma concentrate of good sensory attributes was prepared by polyethylene membrane extraction, which could extract only the volatiles with diethyl ether. GC-MS-Olfactometry was done with the aroma concentrate, and 28 odor-active compounds were detected. Application of aroma extract dilution analysis to the separated fraction revealed high flavor dilution factors with respect to acetic acid, 4-hydroxy-2(or5)-ethyl-5(or2)-methyl-3(2H)-furanone (HEMF), 3-methyl-1-butanol (isoamyl alcohol), and 3-(methylsulfanyl)propanal (methional). A model aroma mixture containing above four odorants showed a good similarity with the aroma of the soy sauce itself. Consequently, the reminiscent aroma mixture of soy sauce was prepared in water. The ratio of acetic acid, HEMF, isoamyl alcohol, and methional was 2500:300:100:1.
Statistical signatures of a targeted search by bacteria

Science.gov (United States)

Jashnsaz, Hossein; Anderson, Gregory G.; Pressé, Steve

2017-12-01

Chemoattractant gradients are rarely well-controlled in nature and recent attention has turned to bacterial chemotaxis toward typical bacterial food sources such as food patches or even bacterial prey. In environments with localized food sources reminiscent of a bacterium’s natural habitat, striking phenomena—such as the volcano effect or banding—have been predicted or expected to emerge from chemotactic models. However, in practice, from limited bacterial trajectory data it is difficult to distinguish targeted searches from an untargeted search strategy for food sources. Here we use a theoretical model to identify statistical signatures of a targeted search toward point food sources, such as prey. Our model is constructed on the basis that bacteria use temporal comparisons to bias their random walk, exhibit finite memory and are subject to random (Brownian) motion as well as signaling noise. The advantage with using a stochastic model-based approach is that a stochastic model may be parametrized from individual stochastic bacterial trajectories but may then be used to generate a very large number of simulated trajectories to explore average behaviors obtained from stochastic search strategies. For example, our model predicts that a bacterium’s diffusion coefficient increases as it approaches the point source and that, in the presence of multiple sources, bacteria may take substantially longer to locate their first source giving the impression of an untargeted search strategy.
Texture classification using autoregressive filtering

Science.gov (United States)

Lawton, W. M.; Lee, M.

1984-01-01

A general theory of image texture models is proposed and its applicability to the problem of scene segmentation using texture classification is discussed. An algorithm, based on half-plane autoregressive filtering, which optimally utilizes second order statistics to discriminate between texture classes represented by arbitrary wide sense stationary random fields is described. Empirical results of applying this algorithm to natural and sysnthesized scenes are presented and future research is outlined.
CRUMB TEXTURE OF SPELT BREAD

Directory of Open Access Journals (Sweden)

Joanna Korczyk-Szabó

2013-12-01

Full Text Available Abstract The bread quality is considerably dependent on the texture characteristic of bread crumb. Crumb texture is an important quality indicator, as consumer prefer different bread taste. Texture analysis is primarily concerned with the evaluation of mechanical characteristics where a material is subjected to a controlled force from which a deformation curve of its response is generated. It is an objective physical examination of baked products and gives direct information on the product quality, oppositely to dough rheology tests what inform on the baking suitability of the flour, as raw material. This is why the texture analysis is one of the most helpful analytical methods of the product development. In the framework of our research during the years 2008 – 2009 were analyzed selected indicators for bread texture quality of five Triticum spelta L. varieties – Altgold, Oberkulmer Rotkorn, Ostro, Rubiota and Franckenkorn grown in an ecological system. The bread texture quality was evaluated on texture analyzer TA.XT Plus (Stable Micro Systems, Surrey, UK, following the AACC (74-09 standard method and expressed as crumb firmness (N, stiffness (N.mm-1 and relative elasticity (%. Our research proved that all selected indicators were significantly influenced by the year of growing and variety. The most soft bread was achieved in Rubiota, whereas bread crumb samples from Franckenkorn and Altgold were the most firm and stiff. Correlation analysis showed strong negative correlation between relative elasticity and bread crumb firmness as well as bread stiffness (-0.81++, -0.78++. The spelt grain can be a good source for making bread flour, but is closely dependent on choice of spelt variety. The spelt wheat bread crumb texture need further investigation as it can be a reliable quality parameter.
The Link between Preschoolers' Phonological Awareness and Mothers' Book-Reading and Reminiscing Practices in Low-Income Families

Science.gov (United States)

Leyva, Diana; Sparks, Alison; Reese, Elaine

2012-01-01

The relation between preschoolers' phonological awareness and the frequency and quality of parents' book-reading and reminiscing practices were examined in 54 low-income and ethnically diverse families. Children's phonological awareness was assessed at the beginning and end of preschool. Mothers reported the frequency with which they read books…
Some Proxy Signature and Designated verifier Signature Schemes over Braid Groups

OpenAIRE

Lal, Sunder; Verma, Vandani

2009-01-01

Braids groups provide an alternative to number theoretic public cryptography and can be implemented quite efficiently. The paper proposes five signature schemes: Proxy Signature, Designated Verifier, Bi-Designated Verifier, Designated Verifier Proxy Signature And Bi-Designated Verifier Proxy Signature scheme based on braid groups. We also discuss the security aspects of each of the proposed schemes.
Symmetry realization of texture zeros

International Nuclear Information System (INIS)

Grimus, W.; Joshipura, A.S.; Lavoura, L.; Tanimoto, M.

2004-01-01

We show that it is possible to enforce texture zeros in arbitrary entries of the fermion mass matrices by means of Abelian symmetries; in this way, many popular mass-matrix textures find a symmetry justification. We propose two alternative methods which allow one to place zeros in any number of elements of the mass matrices that one wants. They are applicable simultaneously in the quark and lepton sectors. They are also applicable in grand unified theories. The number of scalar fields required by our methods may be large; still, in many interesting cases this number can be reduced considerably. The larger the desired number of texture zeros is, the simpler are the models which reproduce the texture. (orig.)

Texture and anisotropy in ferroelectric lead metaniobate

Science.gov (United States)

Iverson, Benjamin John

Ferroelectric lead metaniobate, PbNb2O6, is a piezoelectric ceramic typically used because of its elevated Curie temperature and anisotropic properties. However, the piezoelectric constant, d33, is relatively low in randomly oriented ceramics when compared to other ferroelectrics. Crystallographic texturing is often employed to increase the piezoelectric constant because the spontaneous polarization axes of grains are better aligned. In this research, crystallographic textures induced through tape casting are distinguished from textures induced through electrical poling. Texture is described using multiple quantitative approaches utilizing X-ray and neutron time-of-flight diffraction. Tape casting lead metaniobate with an inclusion of acicular template particles induces an orthotropic texture distribution. Templated grain growth from seed particles oriented during casting results in anisotropic grain structures. The degree of preferred orientation is directly linked to the shear behavior of the tape cast slurry. Increases in template concentration, slurry viscosity, and casting velocity lead to larger textures by inducing more particle orientation in the tape casting plane. The maximum 010 texture distributions were two and a half multiples of a random distribution. Ferroelectric texture was induced by electrical poling. Electric poling increases the volume of material oriented with the spontaneous polarization direction in the material. Samples with an initial paraelectric texture exhibit a greater change in the domain volume fraction during electrical poling than randomly oriented ceramics. In tape cast samples, the resulting piezoelectric response is proportional to the 010 texture present prior to poling. This results in property anisotropy dependent on initial texture. Piezoelectric properties measured on the most textured ceramics were similar to those obtained with a commercial standard.
Food Texture Preferences in Infants Versus Toddlers.

Science.gov (United States)

Lundy, Brenda; And Others

1998-01-01

Compared food texture preferences during infancy and toddlerhood. Found that infants displayed more negative expressions and head and body movements in response to complex textures than to simple textures. Toddlers displayed more positive head and body movements and more eagerness in response to complex than to simple textures. Experience with…
REMCARE: Pragmatic Multi-Centre Randomised Trial of Reminiscence Groups for People with Dementia and their Family Carers: Effectiveness and Economic Analysis.

Directory of Open Access Journals (Sweden)

Robert T Woods

Full Text Available Joint reminiscence groups, involving people with dementia and family carers together, are popular, but the evidence-base is limited. This study aimed to assess the effectiveness and cost-effectiveness of joint reminiscence groups as compared to usual care.This multi-centre, pragmatic randomised controlled trial had two parallel arms: intervention group and usual-care control group. A restricted dynamic method of randomisation was used, with an overall allocation ratio of 1:1, restricted to ensure viable sized intervention groups. Assessments, blind to treatment allocation, were carried out at baseline, three months and ten months (primary end-point, usually in the person's home. Participants were recruited in eight centres, mainly through NHS Memory Clinics and NHS community mental health teams. Included participants were community resident people with mild to moderate dementia (DSM-IV, who had a relative or other care-giver in regular contact, to act as informant and willing and able to participate in intervention. 71% carers were spouses. 488 people with dementia (mean age 77.5were randomised: 268 intervention, 220 control; 350 dyads completed the study (206 intervention, 144 control. The intervention evaluated was joint reminiscence groups (with up to 12 dyads weekly for twelve weeks; monthly maintenance sessions for further seven months. Sessions followed a published treatment manual and were held in a variety of community settings. Two trained facilitators in each centre were supported by volunteers. Primary outcome measures were self-reported quality of life for the person with dementia (QoL-AD, psychological distress for the carer (General Health Questionnaire, GHQ-28. Secondary outcome measures included: autobiographical memory and activities of daily living for the person with dementia; carer stress for the carer; mood, relationship quality and service use and costs for both.The intention to treat analysis (ANCOVA identified no
Texture analysis using Renyi's generalized entropies

NARCIS (Netherlands)

Grigorescu, SE; Petkov, N

2003-01-01

We propose a texture analysis method based on Renyi's generalized entropies. The method aims at identifying texels in regular textures by searching for the smallest window through which the minimum number of different visual patterns is observed when moving the window over a given texture. The
TEXTURAL DESCRIPTORS FOR MULTIPHASIC ORE PARTICLES

Directory of Open Access Journals (Sweden)

Laura Pérez-Barnuevo

2012-11-01

Full Text Available Monitoring of mineral processing circuits by means of particle liberation analysis through quantitative image analysis has become a routine technique within the last decades. Usually, liberation indices are computed as weight proportions, which is not informative enough when complex texture ores are treated by flotation. In these cases, liberation has to be computed as phase surface exposed to reactants, and textural relationships between minerals have to be characterized to determine the possibility of increasing exposure. In this paper, some indices to achieve a complete texture characterization have been developed in terms of 2D phase contact and mineral surfaces exposure. Indices suggested by other authors are also compared. The response of this set of parameters against textural changes has been explored on simple synthetic textures ranging from single to multiple inclusions and single to multiple veins and their ability to discriminate between different textural features is analyzed over real mineral particles with known internal structure.
Mimicking human texture classification

NARCIS (Netherlands)

Rogowitz, B.E.; van Rikxoort, Eva M.; van den Broek, Egon; Pappas, T.N.; Schouten, Theo E.; Daly, S.J.

2005-01-01

In an attempt to mimic human (colorful) texture classification by a clustering algorithm three lines of research have been encountered, in which as test set 180 texture images (both their color and gray-scale equivalent) were drawn from the OuTex and VisTex databases. First, a k-means algorithm was
The clinical efficacy of reminiscence therapy in patients with mild-to-moderate Alzheimer disease: Study protocol for a randomized parallel-design controlled trial.

Science.gov (United States)

Li, Mo; Lyu, Ji-Hui; Zhang, Yi; Gao, Mao-Long; Li, Wen-Jie; Ma, Xin

2017-12-01

Alzheimer disease (AD) is one of the most common diseases among the older adults. Currently, various nonpharmacological interventions are used for the treatment of AD. Such as reminiscence therapy is being widely used in Western countries. However, it is often used as an empirical application in China; the evidence-based efficacy of reminiscence therapy in AD patients remains to be determined. Therefore, the aim of this research is to assess the effectives of reminiscence therapy for Chinese elderly. This is a randomized parallel-design controlled trial. Mild and moderate AD patients who are in the Beijing Geriatric Hospital, China will be randomized into control and intervention groups (n = 45 for each group). For the intervention group, along with conventional drug therapy, participants will be exposed to a reminiscence therapy of 35 to 45 minutes, 2 times/wk for 12 consecutive weeks. Patients in the control group will undergo conventional drug therapy only. The primary outcome measure will be the differences in Alzheimer disease Assessment Scale-Cognitive Section Score. The secondary outcome measures will be the differences in the Cornell scale for depression in dementia, Neuropsychiatric Inventory score, and Barthel Index scores at baseline, at 4 and 12 weeks of treatment, and 12 weeks after treatment. The protocols have been approved by the ethics committee of Beijing Geriatric Hospital of China (approval no. 2015-010). Findings will be disseminated through presentation at scientific conferences and in academic journals. Chinese Clinical Trial Registry identifier ChiCTR-INR-16009505. Copyright © 2017 The Authors. Published by Wolters Kluwer Health, Inc. All rights reserved.
Description of textures by a structural analysis.

Science.gov (United States)

Tomita, F; Shirai, Y; Tsuji, S

1982-02-01

A structural analysis system for describing natural textures is introduced. The analyzer automatically extracts the texture elements in an input image, measures their properties, classifies them into some distinctive classes (one ``ground'' class and some ``figure'' classes), and computes the distributions of the gray level, the shape, and the placement of the texture elements in each class. These descriptions are used for classification of texture images. An analysis-by-synthesis method for evaluating texture analyzers is also presented. We propose a synthesizer which generates a texture image based on the descriptions. By comparing the reconstructed image with the original one, we can see what information is preserved and what is lost in the descriptions.
SIGNATURE: A workbench for gene expression signature analysis

Directory of Open Access Journals (Sweden)

Chang Jeffrey T

2011-11-01

Full Text Available Abstract Background The biological phenotype of a cell, such as a characteristic visual image or behavior, reflects activities derived from the expression of collections of genes. As such, an ability to measure the expression of these genes provides an opportunity to develop more precise and varied sets of phenotypes. However, to use this approach requires computational methods that are difficult to implement and apply, and thus there is a critical need for intelligent software tools that can reduce the technical burden of the analysis. Tools for gene expression analyses are unusually difficult to implement in a user-friendly way because their application requires a combination of biological data curation, statistical computational methods, and database expertise. Results We have developed SIGNATURE, a web-based resource that simplifies gene expression signature analysis by providing software, data, and protocols to perform the analysis successfully. This resource uses Bayesian methods for processing gene expression data coupled with a curated database of gene expression signatures, all carried out within a GenePattern web interface for easy use and access. Conclusions SIGNATURE is available for public use at http://genepattern.genome.duke.edu/signature/.
Geometric Total Variation for Texture Deformation

DEFF Research Database (Denmark)

Bespalov, Dmitriy; Dahl, Anders Lindbjerg; Shokoufandeh, Ali

2010-01-01

In this work we propose a novel variational method that we intend to use for estimating non-rigid texture deformation. The method is able to capture variation in grayscale images with respect to the geometry of its features. Our experimental evaluations demonstrate that accounting for geometry...... of features in texture images leads to significant improvements in localization of these features, when textures undergo geometrical transformations. Accurate localization of features in the presense of unkown deformations is a crucial property for texture characterization methods, and we intend to expoit...
Hippocampal CA3 transcriptome signature correlates with initial precipitating injury in refractory mesial temporal lobe epilepsy.

Directory of Open Access Journals (Sweden)

Silvia Y Bando

Full Text Available BACKGROUND: Prolonged febrile seizures constitute an initial precipitating injury (IPI commonly associated with refractory mesial temporal lobe epilepsy (RMTLE. In order to investigate IPI influence on the transcriptional phenotype underlying RMTLE we comparatively analyzed the transcriptomic signatures of CA3 explants surgically obtained from RMTLE patients with (FS or without (NFS febrile seizure history. Texture analyses on MRI images of dentate gyrus were conducted in a subset of surgically removed sclerotic hippocampi for identifying IPI-associated histo-radiological alterations. METHODOLOGY/PRINCIPAL FINDINGS: DNA microarray analysis revealed that CA3 global gene expression differed significantly between FS and NFS subgroups. An integrative functional genomics methodology was used for characterizing the relations between GO biological processes themes and constructing transcriptional interaction networks defining the FS and NFS transcriptomic signatures and its major gene-gene links (hubs. Co-expression network analysis showed that: i CA3 transcriptomic profiles differ according to the IPI; ii FS distinctive hubs are mostly linked to glutamatergic signalization while NFS hubs predominantly involve GABAergic pathways and neurotransmission modulation. Both networks have relevant hubs related to nervous system development, what is consistent with cell genesis activity in the hippocampus of RMTLE patients. Moreover, two candidate genes for therapeutic targeting came out from this analysis: SSTR1, a relevant common hub in febrile and afebrile transcriptomes, and CHRM3, due to its putative role in epilepsy susceptibility development. MRI texture analysis allowed an overall accuracy of 90% for pixels correctly classified as belonging to FS or NFS groups. Histological examination revealed that granule cell loss was significantly higher in FS hippocampi. CONCLUSIONS/SIGNIFICANCE: CA3 transcriptional signatures and dentate gyrus morphology fairly
Feature-aware natural texture synthesis

KAUST Repository

Wu, Fuzhang; Dong, Weiming; Kong, Yan; Mei, Xing; Yan, Dongming; Zhang, Xiaopeng; Paul, Jean Claude

2014-01-01

This article presents a framework for natural texture synthesis and processing. This framework is motivated by the observation that given examples captured in natural scene, texture synthesis addresses a critical problem, namely, that synthesis
Deformation texture and microtexture development in zircaloy-2

International Nuclear Information System (INIS)

Vanitha, C.; Kiran Kumar, M.; Samajdar, I.; Vishvanathan, N.N.; Dey, G.K.; Tewari, R.; Srivastava, D.; Banerjee, S.

2002-01-01

In the present study, two starting materials used were as-cast Zircaloy-2 with random texture and the finished tube with relatively stronger starting texture. Specimens of the alloys were hot rolled to various strains at different temperature. The texture measurement was carried out and was represented in the form of Orientation Distribution Function which showed a sluggish texture development on high temperature deformation. In the case of as cast alloy with increase in strain at a constant deformation temperature, development in the texture was significant. Upon increasing the working temperature, rate of the overall texture development has been found to reduce. This could be due to reduced slip-twin activities, recovery or due to recrystallization. Microstructural and relative hardening studies were carried out for understanding the mechanisms of deformation texture developments at warm and hot working stages. In the case of finished tube having initially strong texture exhibited slower development in texture on warm and hot rolling. (author)
Trabecular morphometry by fractal signature analysis is a novel marker of osteoarthritis progression.

Science.gov (United States)

Kraus, Virginia Byers; Feng, Sheng; Wang, ShengChu; White, Scott; Ainslie, Maureen; Brett, Alan; Holmes, Anthony; Charles, H Cecil

2009-12-01

To evaluate the effectiveness of using subchondral bone texture observed on a radiograph taken at baseline to predict progression of knee osteoarthritis (OA) over a 3-year period. A total of 138 participants in the Prediction of Osteoarthritis Progression study were evaluated at baseline and after 3 years. Fractal signature analysis (FSA) of the medial subchondral tibial plateau was performed on fixed flexion radiographs of 248 nonreplaced knees, using a commercially available software tool. OA progression was defined as a change in joint space narrowing (JSN) or osteophyte formation of 1 grade according to a standardized knee atlas. Statistical analysis of fractal signatures was performed using a new model based on correlating the overall shape of a fractal dimension curve with radius. Fractal signature of the medial tibial plateau at baseline was predictive of medial knee JSN progression (area under the curve [AUC] 0.75, of a receiver operating characteristic curve) but was not predictive of osteophyte formation or progression of JSN in the lateral compartment. Traditional covariates (age, sex, body mass index, knee pain), general bone mineral content, and joint space width at baseline were no more effective than random variables for predicting OA progression (AUC 0.52-0.58). The predictive model with maximum effectiveness combined fractal signature at baseline, knee alignment, traditional covariates, and bone mineral content (AUC 0.79). We identified a prognostic marker of OA that is readily extracted from a plain radiograph using FSA. Although the method needs to be validated in a second cohort, our results indicate that the global shape approach to analyzing these data is a potentially efficient means of identifying individuals at risk of knee OA progression.
Texture Repairing by Unified Low Rank Optimization

Institute of Scientific and Technical Information of China (English)

Xiao Liang; Xiang Ren; Zhengdong Zhang; Yi Ma

2016-01-01

In this paper, we show how to harness both low-rank and sparse structures in regular or near-regular textures for image completion. Our method is based on a unified formulation for both random and contiguous corruption. In addition to the low rank property of texture, the algorithm also uses the sparse assumption of the natural image: because the natural image is piecewise smooth, it is sparse in certain transformed domain (such as Fourier or wavelet transform). We combine low-rank and sparsity properties of the texture image together in the proposed algorithm. Our algorithm based on convex optimization can automatically and correctly repair the global structure of a corrupted texture, even without precise information about the regions to be completed. This algorithm integrates texture rectification and repairing into one optimization problem. Through extensive simulations, we show our method can complete and repair textures corrupted by errors with both random and contiguous supports better than existing low-rank matrix recovery methods. Our method demonstrates significant advantage over local patch based texture synthesis techniques in dealing with large corruption, non-uniform texture, and large perspective deformation.
The Effects of Integrative Reminiscence Therapy on Signs and Symptoms of Depression in the Elderly

Directory of Open Access Journals (Sweden)

Asghar Mohammadzadeh

2011-04-01

Full Text Available Objectives: The Main aim of this study was to determine the effects of integrative reminiscence therapy on signs and symptoms of depression in the institutionalized elderly. Methods & Materials: This study was an experimental study with pre-test and post-test along with control group. The statistical society in this study consisted of all elderly adults residing in centers of Isfahan. Sample selection style was simple random sampling. The Geriatric Depression Scale (GDS and Mini Mental Status Examination (MMSE were primarily administered and the scores of higher than ten in GDS (severe and moderate depression and higher than twenty one in MMSE were identified and a number of 36 subjects were randomly selected and were randomly divided into two groups, 18 participants to experiment group and 18 participants to the control group. Results: The analysis of the results was performed using independent t-test and chisquare. Mean of the difference of pretest and posttest results was acquired in experimental group (M=2.5385, SD=0.87706and control group (M=1, SD=0.93541. Conclusion: The results of this study suggest that integrative reminiscence therapy can significantly result in reducing depression signs and symptoms in older adults. This intervention can serve as a supplementary treatment along with pharmaceutical treatment.
Cascaded Amplitude Modulations in Sound Texture Perception

DEFF Research Database (Denmark)

McWalter, Richard Ian; Dau, Torsten

2017-01-01

. In this study, we investigated the perception of sound textures that contain rhythmic structure, specifically second-order amplitude modulations that arise from the interaction of different modulation rates, previously described as "beating" in the envelope-frequency domain. We developed an auditory texture...... model that utilizes a cascade of modulation filterbanks that capture the structure of simple rhythmic patterns. The model was examined in a series of psychophysical listening experiments using synthetic sound textures-stimuli generated using time-averaged statistics measured from real-world textures....... In a texture identification task, our results indicated that second-order amplitude modulation sensitivity enhanced recognition. Next, we examined the contribution of the second-order modulation analysis in a preference task, where the proposed auditory texture model was preferred over a range of model...
Advecting Procedural Textures for 2D Flow Animation

Science.gov (United States)

Kao, David; Pang, Alex; Moran, Pat (Technical Monitor)

2001-01-01

This paper proposes the use of specially generated 3D procedural textures for visualizing steady state 2D flow fields. We use the flow field to advect and animate the texture over time. However, using standard texture advection techniques and arbitrary textures will introduce some undesirable effects such as: (a) expanding texture from a critical source point, (b) streaking pattern from the boundary of the flowfield, (c) crowding of advected textures near an attracting spiral or sink, and (d) absent or lack of textures in some regions of the flow. This paper proposes a number of strategies to solve these problems. We demonstrate how the technique works using both synthetic data and computational fluid dynamics data.
A Mobile Multimedia Reminiscence Therapy Application to Reduce Behavioral and Psychological Symptoms in Persons with Alzheimer's.

Science.gov (United States)

Imtiaz, Danish; Khan, Arshia; Seelye, Adriana

2018-01-01

The goal of this project is to develop a novel and innovative mobile solution to address behavioral and psychological symptoms of dementia (BPSD) that occur in individuals with Alzheimer's. BPSD can include agitation, restlessness, aggression, apathy, obsessive-compulsive and repetitive behaviors, hallucinations, delusions, paranoia, and wandering. Alzheimer's currently affects 5.4 million adults in the United States and that number is projected to increase to 14 million by 2050. Almost 90% of all affected with AD experience BPSD, resulting in increased healthcare costs, heavier burden on caregivers, poor patient outcomes, early nursing home placement, long-term hospitalizations, and misuse of medications. Pharmacological support may have undesirable side effects such as sedation. Nonpharmacological interventions are alternative solutions that have shown to be effective without undesirable side effects. Music therapy has been found to lower BPSD symptoms significantly. Our study is based on combination of the reminiscence and the music therapies where past memorable events are recalled using prompts such as photos, videos, and music. We are proposing a mobile multimedia solution, a technical version of the combined reminiscence, and music therapies to prevent the occurrence of BPSD, especially for the rural population who have reduced access to dementia care services.
Celebrating fifty years of research and applications in reminiscence and life review: State of the art and new directions

NARCIS (Netherlands)

Westerhof, Gerben Johan; Bohlmeijer, Ernst Thomas

2014-01-01

Fifty years ago, psychiatrist Robert Butler (1963) published an influential article on the recollection and evaluation of personal memories in later life. We discuss the major insights and applications in psychological gerontology that were inspired by Butler. Reminiscence and life review serve to

Cascaded Amplitude Modulations in Sound Texture Perception

Directory of Open Access Journals (Sweden)

Richard McWalter

2017-09-01

Full Text Available Sound textures, such as crackling fire or chirping crickets, represent a broad class of sounds defined by their homogeneous temporal structure. It has been suggested that the perception of texture is mediated by time-averaged summary statistics measured from early auditory representations. In this study, we investigated the perception of sound textures that contain rhythmic structure, specifically second-order amplitude modulations that arise from the interaction of different modulation rates, previously described as “beating” in the envelope-frequency domain. We developed an auditory texture model that utilizes a cascade of modulation filterbanks that capture the structure of simple rhythmic patterns. The model was examined in a series of psychophysical listening experiments using synthetic sound textures—stimuli generated using time-averaged statistics measured from real-world textures. In a texture identification task, our results indicated that second-order amplitude modulation sensitivity enhanced recognition. Next, we examined the contribution of the second-order modulation analysis in a preference task, where the proposed auditory texture model was preferred over a range of model deviants that lacked second-order modulation rate sensitivity. Lastly, the discriminability of textures that included second-order amplitude modulations appeared to be perceived using a time-averaging process. Overall, our results demonstrate that the inclusion of second-order modulation analysis generates improvements in the perceived quality of synthetic textures compared to the first-order modulation analysis considered in previous approaches.
Natural texture retrieval based on perceptual similarity measurement

Science.gov (United States)

Gao, Ying; Dong, Junyu; Lou, Jianwen; Qi, Lin; Liu, Jun

2018-04-01

A typical texture retrieval system performs feature comparison and might not be able to make human-like judgments of image similarity. Meanwhile, it is commonly known that perceptual texture similarity is difficult to be described by traditional image features. In this paper, we propose a new texture retrieval scheme based on texture perceptual similarity. The key of the proposed scheme is that prediction of perceptual similarity is performed by learning a non-linear mapping from image features space to perceptual texture space by using Random Forest. We test the method on natural texture dataset and apply it on a new wallpapers dataset. Experimental results demonstrate that the proposed texture retrieval scheme with perceptual similarity improves the retrieval performance over traditional image features.
Epitaxial hexagonal materials on IBAD-textured substrates

Science.gov (United States)

Matias, Vladimir; Yung, Christopher

2017-08-15

A multilayer structure including a hexagonal epitaxial layer, such as GaN or other group III-nitride (III-N) semiconductors, a oriented textured layer, and a non-single crystal substrate, and methods for making the same. The textured layer has a crystalline alignment preferably formed by the ion-beam assisted deposition (IBAD) texturing process and can be biaxially aligned. The in-plane crystalline texture of the textured layer is sufficiently low to allow growth of high quality hexagonal material, but can still be significantly greater than the required in-plane crystalline texture of the hexagonal material. The IBAD process enables low-cost, large-area, flexible metal foil substrates to be used as potential alternatives to single-crystal sapphire and silicon for manufacture of electronic devices, enabling scaled-up roll-to-roll, sheet-to-sheet, or similar fabrication processes to be used. The user is able to choose a substrate for its mechanical and thermal properties, such as how well its coefficient of thermal expansion matches that of the hexagonal epitaxial layer, while choosing a textured layer that more closely lattice matches that layer.
The reminiscence bump in autobiographical memory and for public events

DEFF Research Database (Denmark)

Koppel, Jonathan; Berntsen, Dorthe

2016-01-01

of public events. We did so between-subjects, through two cueing methods administered within-subjects, the cue word method and the important memories method. For word-cued memories, we found a similar bump from ages 5 to 19 for both types of memories. However, the bump was more pronounced...... for autobiographical memories. For most important memories, we found a bump from ages 20 to 29 in autobiographical memory, but little discernible age pattern for public events. Rather, specific public events (e.g., the Fall of the Berlin Wall) dominated recall, producing a chronological distribution characterised......The reminiscence bump has been found for both autobiographical memories and memories of public events. However, there have been few comparisons of the bump across each type of event. In the current study, therefore, we compared the bump for autobiographical memories versus the bump for memories...
Emotional effects of dynamic textures

NARCIS (Netherlands)

Toet, A.; Henselmans, M.; Lucassen, M.P.; Gevers, T.

2011-01-01

This study explores the effects of various spatiotemporal dynamic texture characteristics on human emotions. The emotional experience of auditory (eg, music) and haptic repetitive patterns has been studied extensively. In contrast, the emotional experience of visual dynamic textures is still largely
Modeling Human Aesthetic Perception of Visual Textures

NARCIS (Netherlands)

Thumfart, Stefan; Jacobs, Richard H. A. H.; Lughofer, Edwin; Eitzinger, Christian; Cornelissen, Frans W.; Groissboeck, Werner; Richter, Roland

Texture is extensively used in areas such as product design and architecture to convey specific aesthetic information. Using the results of a psychological experiment, we model the relationship between computational texture features and aesthetic properties of visual textures. Contrary to previous
Human versus artificial texture perception

NARCIS (Netherlands)

Petiet, Peter J.; van Erp, J.; Drullman, R.; van den Broek, Egon; Beintema, J.; van Wijngaarden, S.

2006-01-01

The performances of current texture analysis algorithms are still poor, especially when applied to a large, diffuse texture domain. Most of these purely computationally driven techniques are created to function within a highly restricted domain. When applied as computer vision techniques, frequently
A Review Paper on Camouflage Texture Evaluation

OpenAIRE

Amol Patil; Girraj Prasad Rathode

2013-01-01

Traditional evaluation method of camouflage texture effect is subjective evaluation. It’s very tedious and inconvenient to direct the texture designing. In this project, a systemic and rational method for direction and evaluation of camouflage texture designing is proposed. Camouflage consists of things such as leaves, branches, or brown and green paint, which are used to make it difficult for an enemy to see military forces and equipment. A camouflage texture evaluation method based on WSSIM...
Effects of initial microstructure and texture on microstructure, texture evolution and magnetic properties of non-oriented electrical steel

Energy Technology Data Exchange (ETDEWEB)

Liu, Hai-Tao, E-mail: liuht@ral.neu.edu.cn [State Key Laboratory of Rolling and Automation, Northeastern University, P.O. Box 105, Shenyang 110819 (China); Institute of Research of Iron and Steel, Shasteel, Zhangjiagang 215625, Jiangsu (China); Li, Hua-Long [Institute of Research of Iron and Steel, Shasteel, Zhangjiagang 215625, Jiangsu (China); Wang, Hui [Science and Technology on Surface Physics and Chemistry Laboratory, P.O. Box No. 9-35, Huafengxincun, Jiangyou City, Sichuan Province 621908 (China); National Key Laboratory for Nuclear Fuel and Materials, Nuclear Power Institute of China, Chengdu 610041 (China); Liu, Yi; Gao, Fei; An, Ling-Zi; Zhao, Shi-Qi; Liu, Zhen-Yu; Wang, Guo-Dong [State Key Laboratory of Rolling and Automation, Northeastern University, P.O. Box 105, Shenyang 110819 (China)

2016-05-15

An equiaxed grained as-cast strip and a columnar grained as-cast strip was produced by using twin-roll strip casting, respectively. Both as-cast strips mainly containing 0.71 wt%Si and 0.44 wt%Al were cold rolled and annealed with or without the hot rolling prior to cold rolling. Microstructure, texture evolution along the whole processing routes and the magnetic properties were investigated in detail. It was found that the equiaxed grained strip was characterized by almost random texture while the columnar grained strip was dominated by strong λ-fiber (<001>‖ND) texture. After cold rolling and annealing, all the final sheets of both the as-cast strips showed extremely weak γ-fiber (<111>‖ND) recrystallization texture. In addition, the finally annealed sheets of the equiaxed grained strip were dominated by relatively weak λ-fiber and strong Goss ({110}<001>) recrystallization texture while those of the columnar grained strip were dominated by much stronger λ-fiber and much weaker Goss recrystallization texture regardless of whether the hot rolling was adopted before cold rolling, thus the former showed much lower magnetic induction than the latter. On the other hand, even though the finally annealed sheets of the equiaxed grained strip showed a little more homogeneous recrystallization microstructure with a little bigger grain size than those of the columnar grained strip in the case of no hot rolling, a much higher iron loss was displayed. By contrast, in the case of hot rolling, the former exhibited a little lower iron loss than the latter as a result of the more significant increase in grain size and λ-fiber recrystallization texture. The introduction of the hot rolling could increase the grain size, strengthen λ-fiber texture and weaken Goss texture of the finally annealed sheets of both the as-cast strips, leading to a much improvement in both the magnetic induction and iron loss. - Highlights: • Equiaxed and columnar grained as-cast strips were
Bayesian exploration for intelligent identification of textures

Directory of Open Access Journals (Sweden)

Jeremy A. Fishel

2012-06-01

Full Text Available In order to endow robots with humanlike abilities to characterize and identify objects, they must be provided with tactile sensors and intelligent algorithms to select, control and interpret data from useful exploratory movements. Humans make informed decisions on the sequence of exploratory movements that would yield the most information for the task, depending on what the object may be and prior knowledge of what to expect from possible exploratory movements. This study is focused on texture discrimination, a subset of a much larger group of exploratory movements and percepts that humans use to discriminate, characterize, and identify objects. Using a testbed equipped with a biologically inspired tactile sensor (the BioTac® we produced sliding movements similar to those that humans make when exploring textures. Measurement of tactile vibrations and reaction forces when exploring textures were used to extract measures of textural properties inspired from psychophysical literature (traction, roughness, and fineness. Different combinations of normal force and velocity were identified to be useful for each of these three properties. A total of 117 textures were explored with these three movements to create a database of prior experience to use for identifying these same textures in future encounters. When exploring a texture, the discrimination algorithm adaptively selects the optimal movement to make and property to measure based on previous experience to differentiate the texture from a set of plausible candidates, a process we call Bayesian exploration. Performance of 99.6% in correctly discriminating pairs of similar textures was found to exceed human capabilities. Absolute classification from the entire set of 117 textures generally required a small number of well-chosen exploratory movements (median=5 and yielded a 95.4% success rate. The method of Bayesian exploration developed and tested in this paper may generalize well to other
BREAD CRUMBS TEXTURE OF SPELT

Directory of Open Access Journals (Sweden)

Joanna Korczyk – Szabó

2014-02-01

Full Text Available Texture analysis is an objective physical examination of baked products and gives direct information on the product quality, oppositely to dough rheology tests what inform on the baking suitability of the flour, as raw material. Evaluation of the mechanical properties of bread crumb is important not only for quality assurance in the bakeries, but also for assessing the effects of changes in dough ingredients and processing condition and also for describing the changes in bread crumb during storage. Crumb cellular structure is an important quality criterion used in commercial baking and research laboratories to judge bread quality alongside taste, crumb colour and crumb physical texture. In the framework of our research during the years 2010 – 2011 were analyzed selected indicators of bread crumb for texture quality of three Triticum spelta L. cultivars – Altgold, Rubiota and Ostro grown in an ecological system. The bread texture quality was evaluated on texture analyzer TA.XT Plus (Stable Micro Systems, Surrey, UK, following the AACC (74-09 standard and expressed as crumb firmness (N, stiffness (N.mm-1 and relative elasticity (%. Our research proved that all selected indicators were significantly influenced by the year of growing and variety. The most soft bread was achieved in Rubiota, whereas bread crumb samples from Altgold and Ostro were the most firm and stiff. Correlation analysis showed strong negative correlation between relative elasticity and bread crumb firmness as well as bread stiffness (-0.65++, -0.66++. The spelt wheat bread crumb texture need further investigation as it can be a reliable quality parameter.
Unconditionally Secure Quantum Signatures

Directory of Open Access Journals (Sweden)

Ryan Amiri

2015-08-01

Full Text Available Signature schemes, proposed in 1976 by Diffie and Hellman, have become ubiquitous across modern communications. They allow for the exchange of messages from one sender to multiple recipients, with the guarantees that messages cannot be forged or tampered with and that messages also can be forwarded from one recipient to another without compromising their validity. Signatures are different from, but no less important than encryption, which ensures the privacy of a message. Commonly used signature protocols—signatures based on the Rivest–Adleman–Shamir (RSA algorithm, the digital signature algorithm (DSA, and the elliptic curve digital signature algorithm (ECDSA—are only computationally secure, similar to public key encryption methods. In fact, since these rely on the difficulty of finding discrete logarithms or factoring large primes, it is known that they will become completely insecure with the emergence of quantum computers. We may therefore see a shift towards signature protocols that will remain secure even in a post-quantum world. Ideally, such schemes would provide unconditional or information-theoretic security. In this paper, we aim to provide an accessible and comprehensive review of existing unconditionally securesecure signature schemes for signing classical messages, with a focus on unconditionally secure quantum signature schemes.
Quantitative Characterisation of Surface Texture

DEFF Research Database (Denmark)

De Chiffre, Leonardo; Lonardo, P.M.; Trumpold, H.

2000-01-01

This paper reviews the different methods used to give a quantitative characterisation of surface texture. The paper contains a review of conventional 2D as well as 3D roughness parameters, with particular emphasis on recent international standards and developments. It presents new texture...
Fast Synthesis of Dynamic Colour Textures

Czech Academy of Sciences Publication Activity Database

Filip, Jiří; Haindl, Michal; Chetverikov, D.

-, č. 66 (2006), s. 53-54 ISSN 0926-4981 R&D Projects: GA AV ČR IAA2075302; GA AV ČR 1ET400750407; GA MŠk 1M0572 EU Projects: European Commission(XE) 507752 - MUSCLE Institutional research plan: CEZ:AV0Z10750506 Keywords : dynamic colour texture * texture synthesis * texture modelling Subject RIV: BD - Theory of Information http://www.ercim.org/publication/Ercim_News/enw66/haindl.html
Textural and Isotopic Evidence for Silica Cementation in 1.88 GA Granular Iron Formation

Science.gov (United States)

Brengman, L. A.; Fedo, C.; Martin, W.

2016-12-01

Controls on quartz precipitation mechanisms and silicon isotope fractionation during diagenesis of Precambrian iron formation (IF) are not well constrained. The goal of this study is to identify textural evidence for the relative timing of silica cementation of granular units from the near un-metamorphosed 1.88 Ga Biwabik IF and determine the silicon isotope composition for such a silicification event. The lowermost IF (lower cherty, LC) consists of granular units associated with high-energy sedimentary structures interpreted to represent shallow-marine shelf deposition. Up-section is marked by an abrupt shift to banded units interpreted as a transition to quiescent (deeper) water, followed by a return to granular textures and shallower conditions (upper cherty, UC). We first surveyed granular samples of the lower stromatolitic (LC) and upper oncolitic facies (UC) to identify sedimentary textures and cement. LC units consist of microquartz (chert), megaquartz, hematite, carbonate, and detrital quartz, chert, and quartz/Fe-oxide intraclastic material. In UC samples, space between granular material (hematite, magnetite, quartz ooids/intraclasts) is filled by mega-quartz cement, and cross-cutting mega-quartz veins. We targeted mega-quartz cement, and veins for δ30Si analysis via secondary ion mass spectrometry. The average measured δ30Si value of cement (δ30Siavg. cement UC6b = -3.11 ± 0.21 ‰) is significantly different than associated veins (δ30Siavg. vein UC6b = 0.21 ± 0.21 ‰; δ30Siavg. vein LC4 = 0.39 ± 0.21 ‰), both within and between samples. We interpret the relative difference between cement and veins to represent quartz precipitation under different geochemical conditions, and therefore at different times. Combining isotopic and textural evidence, we interpret silica cementation to pre-date veins, and represent quartz precipitation that either varied in rate, or occurred under closed-system conditions affected by Rayleigh distillation. Both
Correlation between macro texture measures carried out by the volumetric method and by different laser texture meter

International Nuclear Information System (INIS)

Parra Ruiz, L.; Yanguas Gonzalez, S. J.

2013-01-01

The reference value for the measurement of surface macro texture in the Spanish Main Road Network is the MTD or Mean Texture Depth (PMT, Profundidad Media de Textura), obtained by means of the volumetric methods, in accordance with the standard UNE EN 13036-1:12010. The fact that it is a spot measurement that requires road closures makes it an expensive procedure as well as slow and dangerous. In addition to this, the test results are relatively sensitive to the operator, being the procedure not too suitable for systematic surveys. These are some of the reasons that have contributed to the development of texture meter laser devices that can be assembled on board of vehicles, circulating without interfering with the normal traffic flow and providing a parameter named the MPD (Mean Depth Profile). According to the standard UNE-EN ISO 13473-1:2006, it is possible to estimate the texture obtained by volumetric methods, with the parameter ETD (Estimated Texture Depth) through the equation: ETD=0,8 x MPD+0.2 In 2008 CEDEX conducted a study that correlated macro texture measures obtained by means of the volumetric method with such carried out by different laser texture meters. The equations yield a better relation between MPD and MTD were dependent on the measurement device used and were not linear equations type, as is it indicated in the standard, but exponential type equations. (Author) 6 refs.
Epitaxial hexagonal materials on IBAD-textured substrates

Energy Technology Data Exchange (ETDEWEB)

Matias, Vladimir; Yung, Christopher

2017-08-15

A multilayer structure including a hexagonal epitaxial layer, such as GaN or other group III-nitride (III-N) semiconductors, a <111> oriented textured layer, and a non-single crystal substrate, and methods for making the same. The textured layer has a crystalline alignment preferably formed by the ion-beam assisted deposition (IBAD) texturing process and can be biaxially aligned. The in-plane crystalline texture of the textured layer is sufficiently low to allow growth of high quality hexagonal material, but can still be significantly greater than the required in-plane crystalline texture of the hexagonal material. The IBAD process enables low-cost, large-area, flexible metal foil substrates to be used as potential alternatives to single-crystal sapphire and silicon for manufacture of electronic devices, enabling scaled-up roll-to-roll, sheet-to-sheet, or similar fabrication processes to be used. The user is able to choose a substrate for its mechanical and thermal properties, such as how well its coefficient of thermal expansion matches that of the hexagonal epitaxial layer, while choosing a textured layer that more closely lattice matches that layer.
Texture-dependent effects of pseudo-chewing sound on perceived food texture and evoked feelings in response to nursing care foods.

Science.gov (United States)

Endo, Hiroshi; Ino, Shuichi; Fujisaki, Waka

2017-09-01

Because chewing sounds influence perceived food textures, unpleasant textures of texture-modified diets might be improved by chewing sound modulation. Additionally, since inhomogeneous food properties increase perceived sensory intensity, the effects of chewing sound modulation might depend on inhomogeneity. This study examined the influences of texture inhomogeneity on the effects of chewing sound modulation. Three kinds of nursing care foods in two food process types (minced-/puréed-like foods for inhomogeneous/homogeneous texture respectively) were used as sample foods. A pseudo-chewing sound presentation system, using electromyogram signals, was used to modulate chewing sounds. Thirty healthy elderly participants participated in the experiment. In two conditions with and without the pseudo-chewing sound, participants rated the taste, texture, and evoked feelings in response to sample foods. The results showed that inhomogeneity strongly influenced the perception of food texture. Regarding the effects of the pseudo-chewing sound, taste was less influenced, the perceived food texture tended to change in the minced-like foods, and evoked feelings changed in both food process types. Though there were some food-dependent differences in the effects of the pseudo-chewing sound, the presentation of the pseudo-chewing sounds was more effective in foods with an inhomogeneous texture. In addition, it was shown that the pseudo-chewing sound might have positively influenced feelings. Copyright © 2017 Elsevier Ltd. All rights reserved.
Evaluation of color representation for texture analysis

NARCIS (Netherlands)

Verbrugge, R.; van den Broek, Egon; van Rikxoort, E.M.; Taatgen, N.; Schomaker, L.

2004-01-01

Since more than 50 years texture in image material is a topic of research. Hereby, color was ignored mostly. This study compares 70 different configurations for texture analysis, using four features. For the configurations we used: (i) a gray value texture descriptor: the co-occurrence matrix and a
Orbital selective spin-texture in a topological insulator

Energy Technology Data Exchange (ETDEWEB)

Singh, Bahadur, E-mail: bahadursingh24@gmail.com; Prasad, R. [Department of Physics, Indian Institute of Technology Kanpur, Kanpur 208016 (India)

2015-05-15

Three-dimensional topological insulators support a metallic non-trivial surface state with unique spin texture, where spin and momentum are locked perpendicular to each other. In this work, we investigate the orbital selective spin-texture associated with the topological surface states in Sb2Te{sub 3}, using the first principles calculations. Sb2Te{sub 3} is a strong topological insulator with a p-p type bulk band inversion at the Γ-point and supports a single topological metallic surface state with upper (lower) Dirac-cone has left (right) handed spin-texture. Here, we show that the topological surface state has an additional locking between the spin and orbitals, leading to an orbital selective spin-texture. The out-of-plane orbitals (p{sub z} orbitals) have an isotropic orbital texture for both the Dirac cones with an associated left and right handed spin-texture for the upper and lower Dirac cones, respectively. In contrast, the in-planar orbital texture (p{sub x} and p{sub y} projections) is tangential for the upper Dirac-cone and is radial for the lower Dirac-cone surface state. The dominant in-planar orbital texture in both the Dirac cones lead to a right handed orbital-selective spin-texture.

Heterogeneous patterns enhancing static and dynamic texture classification

International Nuclear Information System (INIS)

Silva, Núbia Rosa da; Martinez Bruno, Odemir

2013-01-01

Some mixtures, such as colloids like milk, blood, and gelatin, have homogeneous appearance when viewed with the naked eye, however, to observe them at the nanoscale is possible to understand the heterogeneity of its components. The same phenomenon can occur in pattern recognition in which it is possible to see heterogeneous patterns in texture images. However, current methods of texture analysis can not adequately describe such heterogeneous patterns. Common methods used by researchers analyse the image information in a global way, taking all its features in an integrated manner. Furthermore, multi-scale analysis verifies the patterns at different scales, but still preserving the homogeneous analysis. On the other hand various methods use textons to represent the texture, breaking texture down into its smallest unit. To tackle this problem, we propose a method to identify texture patterns not small as textons at distinct scales enhancing the separability among different types of texture. We find sub patterns of texture according to the scale and then group similar patterns for a more refined analysis. Tests were performed in four static texture databases and one dynamical one. Results show that our method provide better classification rate compared with conventional approaches both in static and in dynamic texture.
Secondary Traumatic Stress, Psychological Distress, Sharing of Traumatic Reminisces, and Marital Quality among Spouses of Holocaust Child Survivors.

Science.gov (United States)

Lev-Wiesel, Rachel; Amir, Marianne

2001-01-01

Examined the issue of secondary traumatic stress (STS) among spouses of Holocaust survivors who were children during World War II. Results showed that about one third of spouses suffered from some degree of STS symptoms. STS among spouses was related to hostility, anger and interpersonal sensitivity in the survivor, but not to reminiscences with…
Radiation signatures

International Nuclear Information System (INIS)

McGlynn, S.P.; Varma, M.N.

1992-01-01

A new concept for modelling radiation risk is proposed. This concept is based on the proposal that the spectrum of molecular lesions, which we dub ''the radiation signature'', can be used to identify the quality of the causal radiation. If the proposal concerning radiation signatures can be established then, in principle, both prospective and retrospective risk determination can be assessed on an individual basis. A major goal of biophysical modelling is to relate physical events such as ionization, excitation, etc. to the production of radiation carcinogenesis. A description of the physical events is provided by track structure. The track structure is determined by radiation quality, and it can be considered to be the ''physical signature'' of the radiation. Unfortunately, the uniqueness characteristics of this signature are dissipated in biological systems in ∼10 -9 s. Nonetheless, it is our contention that this physical disturbance of the biological system eventuates later, at ∼10 0 s, in molecular lesion spectra which also characterize the causal radiation. (author)
Texture analyses of Sauropod dinosaur bones from Tendaguru

International Nuclear Information System (INIS)

Pyzalla, A.R.; Sander, P.M.; Hansen, A.; Ferreyro, R.; Yi, S.-B.; Stempniewicz, M.; Brokmeier, H.-G.

2006-01-01

The apatite texture of fossil Brachiosaurus brancai and Barosaurus africanus sauropod bones from the excavation site at Tendaguru, Tanzania, was characterized by neutron diffraction pole figures. The results obtained reveal predominantly -fibre textures of the apatite; the fibre direction coincides with the longitudinal direction of the long bones of the skeletons. Neutron pole figures further indicate that other texture types may also be present. Texture strength is similar to dinosaur tendons and contemporary turkey tendon studied by others. Variations of texture strength across the bone wall cross-sections are not significantly large
Automatic Texture Optimization for 3D Urban Reconstruction

Directory of Open Access Journals (Sweden)

LI Ming

2017-03-01

Full Text Available In order to solve the problem of texture optimization in 3D city reconstruction by using multi-lens oblique images, the paper presents a method of seamless texture model reconstruction. At first, it corrects the radiation information of images by camera response functions and image dark channel. Then, according to the corresponding relevance between terrain triangular mesh surface model to image, implements occlusion detection by sparse triangulation method, and establishes the triangles' texture list of visible. Finally, combines with triangles' topology relationship in 3D triangular mesh surface model and means and variances of image, constructs a graph-cuts-based texture optimization algorithm under the framework of MRF(Markov random filed, to solve the discrete label problem of texture optimization selection and clustering, ensures the consistency of the adjacent triangles in texture mapping, achieves the seamless texture reconstruction of city. The experimental results verify the validity and superiority of our proposed method.
Characterization of a texture gradient in tantalum plate

International Nuclear Information System (INIS)

Wright, S.I.; Gray, G.T. III.

1994-01-01

Clark et al. have shown that significant texture gradients can be produced in rolled tantalum plate and that the strength of the gradient is dependent on the processing path. Texture gradients are often ignored because they are time consuming to characterize and add significant complexity to materials modeling. The variation in texture through the thickness of rolled materials is most commonly measured by sectioning samples to different depths through the thickness of the plate and then measuring the texture from these section planes by X-ray diffraction. A new technique based on automatic indexing of electron backscatter diffraction patterns in the scanning electron microscope enables spatially specific orientations to be measured in a practical manner. This technique allows spatial variations in texture to be measured directly enabling gradients in texture to be investigated in more detail than previously possible. This data can be used directly in coupled finite-element/polycrystal-plasticity models to simulate the effects of variations in texture on the plastic behavior of polycrystals. This work examines the variation in texture through the thickness of a tantalum plate and its resultant effect on the compressive deformation of samples prepared from the plate. The characterization of the texture gradient using the automatic point-by-point measurement technique mentioned above is described in detail. The effect of the gradient on the plastic response of through-thickness compression tests is also discussed
Effects of alkali on protein polymerization and textural characteristics of textured wheat protein.

Science.gov (United States)

Li, Ting; Guo, Xiao-Na; Zhu, Ke-Xue; Zhou, Hui-Ming

2018-01-15

The impact of alkali addition on the degree of gluten polymerization and textural characteristics of textured wheat protein was investigated. Results showed that the extrusion process increased the average molecular weight of gluten as evidenced by SDS-PAGE and SDS extractable protein. The addition of alkali not only promoted the degree of gluten polymerization, but also induced dehydroalanine-derived cross-linking. Alkali addition decreased the content of cystine and increased the contents of dehydroalanine and lanthionine. The obvious decrease of free SH showed that dehydroalanine-derived cross-linking was quantitatively less crucial than disulfide cross-linking. Furthermore, the protein cross-linking induced by alkali improved the texture properties of gluten extrudates. SEM analysis showed extrusion under alkaline condition conferred a more fibrous microstructure as a consequence of a compact gluten network. Copyright © 2017 Elsevier Ltd. All rights reserved.
Texture and Elastic Anisotropy of Mantle Olivine

Science.gov (United States)

Nikitin, A. N.; Ivankina, T. I.; Bourilitchev, D. E.; Klima, K.; Locajicek, T.; Pros, Z.

Eight olivine rock samples from different European regions were collected for neu- tron texture analyses and for P-wave velocity measurements by means of ultrasonic sounding at various confining pressures. The orientation distribution functions (ODFs) of olivine were determined and pole figures of the main crystallographic planes were calculated. The spatial P-wave velocity distributions were determined at confining pressures from 0.1 to 400 MPa and modelled from the olivine textures. In dependence upon the type of rock (xenolith or dunite) different behavior of both the P-wave veloc- ity distributions and the anisotropy coefficients with various confining pressures was observed. In order to explain the interdependence of elastic anisotropy and hydrostatic pressure, a model for polycrystalline olivine rocks was suggested, which considers the influence of the crystallographic and the mechanical textures on the elastic behaviour of the polycrystal. Since the olivine texture depends upon the active slip systems and the deformation temperature, neutron texture analyses enable us to estimate depth and thermodynamical conditions during texture formation.
A Novel Texture Classification Procedure by using Association Rules

Directory of Open Access Journals (Sweden)

L. Jaba Sheela

2008-11-01

Full Text Available Texture can be defined as a local statistical pattern of texture primitives in observer’s domain of interest. Texture classification aims to assign texture labels to unknown textures, according to training samples and classification rules. Association rules have been used in various applications during the past decades. Association rules capture both structural and statistical information, and automatically identify the structures that occur most frequently and relationships that have significant discriminative power. So, association rules can be adapted to capture frequently occurring local structures in textures. This paper describes the usage of association rules for texture classification problem. The performed experimental studies show the effectiveness of the association rules. The overall success rate is about 98%.
The Effect of Individual Reminiscence Therapy on Self-Esteem and Depression Among Institutionalized Elderly in India.

Science.gov (United States)

Poorneselvan, Catherine; Steefel, Lorraine

2018-04-01

Nurses often elicit patients' stories as a means to an end-for example, getting to know patients better and providing better care or treatments. However, the act of listening in itself can be therapeutic. Through the use of reminiscence therapy (RT), eliciting stories from elderly residents of a nursing home in India improved their sense of well-being. This article describes a study of the use of RT and presents one resident's story.
Textural features for radar image analysis

Science.gov (United States)

Shanmugan, K. S.; Narayanan, V.; Frost, V. S.; Stiles, J. A.; Holtzman, J. C.

1981-01-01

Texture is seen as an important spatial feature useful for identifying objects or regions of interest in an image. While textural features have been widely used in analyzing a variety of photographic images, they have not been used in processing radar images. A procedure for extracting a set of textural features for characterizing small areas in radar images is presented, and it is shown that these features can be used in classifying segments of radar images corresponding to different geological formations.
Texture analyses of Sauropod dinosaur bones from Tendaguru

Energy Technology Data Exchange (ETDEWEB)

Pyzalla, A.R. [TU Wien, Institute of Material Science and Technology, Karlsplatz 13-308, A-1040 Vienna (Austria) and MPI fuer Eisenforschung GmbH, Max-Planck-Str. 1, D-40237 Duesseldorf (Germany)]. E-mail: pyzalla@mpie.de; Sander, P.M. [University of Bonn, Institute of Palaeontology, Nusseallee, D-53115 Bonn (Germany); Hansen, A. [TU Clausthal, Institute of Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processingnd GKSS Research Centre Geesthacht GmbH, Geesthacht, Max-Planck-Str.1, D-21502 Geesthacht (Germany); Ferreyro, R. [TU Wien, Institute of Material Science and Technology, Karlsplatz 13-308, A-1040 Vienna (Austria); Yi, S.-B. [TU Clausthal, Institute of Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processingnd GKSS Research Centre Geesthacht GmbH, Geesthacht, Max-Planck-Str.1, D-21502 Geesthacht (Germany); MPI fuer Eisenforschung GmbH, Max-Planck-Str. 1, D-40237 Duesseldorf (Germany); Stempniewicz, M. [TU Wien, Institute of Material Science and Technology, Karlsplatz 13-308, A-1040 Vienna (Austria); Brokmeier, H.-G. [TU Clausthal, Institute of Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processingnd GKSS Research Centre Geesthacht GmbH, Geesthacht, Max-Planck-Str.1, D-21502 Geesthacht (Germany)

2006-11-10

The apatite texture of fossil Brachiosaurus brancai and Barosaurus africanus sauropod bones from the excavation site at Tendaguru, Tanzania, was characterized by neutron diffraction pole figures. The results obtained reveal predominantly <0 0 0 1>-fibre textures of the apatite; the fibre direction coincides with the longitudinal direction of the long bones of the skeletons. Neutron pole figures further indicate that other texture types may also be present. Texture strength is similar to dinosaur tendons and contemporary turkey tendon studied by others. Variations of texture strength across the bone wall cross-sections are not significantly large.
Rapidly 3D Texture Reconstruction Based on Oblique Photography

Directory of Open Access Journals (Sweden)

ZHANG Chunsen

2015-07-01

Full Text Available This paper proposes a city texture fast reconstruction method based on aerial tilt image for reconstruction of three-dimensional city model. Based on the photogrammetry and computer vision theory and using the city building digital surface model obtained by prior treatment, through collinear equation calculation geometric projection of object and image space, to obtain the three-dimensional information and texture information of the structure and through certain the optimal algorithm selecting the optimal texture on the surface of the object, realize automatic extraction of the building side texture and occlusion handling of the dense building texture. The real image texture reconstruction results show that: the method to the 3D city model texture reconstruction has the characteristics of high degree of automation, vivid effect and low cost and provides a means of effective implementation for rapid and widespread real texture rapid reconstruction of city 3D model.
Global crystallographic textures obtained by neutron and synchrotron radiation

International Nuclear Information System (INIS)

Brokmeier, Heinz-Guenter

2006-01-01

Global crystallographic textures belong to the main characteristic parameters of engineering materials. The global crystallographic texture is always the average texture of a well-defined sample volume which is representative to solve practical engineering problems. Thus a beam having a high penetration power is needed available as neutron or high energetic X-ray radiation. Texture type and texture sharpness are of great importance for materials properties such as the deep drawing behaviour, one of the basic techniques in many industries. Advantages and disadvantages of both radiations make them complementary for measuring crystallographic textures in a wide range of materials
Electronic Signature Policy

Science.gov (United States)

Establishes the United States Environmental Protection Agency's approach to adopting electronic signature technology and best practices to ensure electronic signatures applied to official Agency documents are legally valid and enforceable
Texture analysis using angle dispersive neutron nuclear scattering

International Nuclear Information System (INIS)

Brokmeier, H.G.

1995-01-01

This paper describes in detail the method of texture determination using neutron diffraction. The main advantages of neutron diffraction arise from the high penetration depth for most materials which is a factor of 10 2 -10 4 higher than for X-ray diffraction. Consequently neutron diffraction is an efficient tool for the investigation of global textures and coarse grained materials. Moreover, the measurement of large sample volumes gives excellent grain statistics, allows the influence of texture inhomogeneities to be neglected and allows the measurement of complete pole figures even of minority phases. A number of examples show the application of neutron diffraction to measure textures of metals, alloys, composites, intermetallic compounds and rocks. A detailed description of TEX-2 the neutron texture diffractometer at GKSS Research Centre is given which is completed by a comparison to other neutron texture diffractometers. (orig.) [de
TEXTURE ANALYSIS OF SPELT WHEAT BREAD

Directory of Open Access Journals (Sweden)

Magdaléna Lacko - Bartošová

2013-02-01

Full Text Available The bread quality is considerably dependent on the texture characteristic of bread crumb. Texture analysis is primarily concerned with the evaluation of mechanical characteristics where a material is subjected to a controlled force from which a deformation curve of its response is generated. It is an objective physical examination of baked products and gives direct information on the product quality, oppositely to dough rheology tests what are inform on the baking suitability of the flour, as raw material. This is why the texture analysis is one of the most helpful analytical methods of the product development. In the framework of our research during the years 2008 – 2009 were analyzed selected indicators of bread crumb for texture quality of three Triticum spelta L. cultivars – Oberkulmer Rotkorn, Rubiota and Franckenkorn grown in an ecological system at the locality of Dolna Malanta near Nitra. The bread texture quality was evaluated on texture analyzer TA.XT Plus and expressed as crumb firmness (N, stiffness (N.mm-1 and relative elasticity (%.Our research proved that all selected indicators were significantly influenced by the year of growing and variety. The most soft bread was measured in Rubiota, whereas bread crumb samples from Franckenkorn were the most firm and stiff. Relative elasticity confirmed that the lowest firmness and stiffness was found in Rubiota bread. The spelt grain can be a good source for making bread flour, but is closely dependent on choice of spelt variety.
Blinding for unanticipated signatures

NARCIS (Netherlands)

D. Chaum (David)

1987-01-01

textabstractPreviously known blind signature systems require an amount of computation at least proportional to the number of signature types, and also that the number of such types be fixed in advance. These requirements are not practical in some applications. Here, a new blind signature technique
Some distinguishing characteristics of contour and texture phenomena in images

Science.gov (United States)

Jobson, Daniel J.

1992-01-01

The development of generalized contour/texture discrimination techniques is a central element necessary for machine vision recognition and interpretation of arbitrary images. Here, the visual perception of texture, selected studies of texture analysis in machine vision, and diverse small samples of contour and texture are all used to provide insights into the fundamental characteristics of contour and texture. From these, an experimental discrimination scheme is developed and tested on a battery of natural images. The visual perception of texture defined fine texture as a subclass which is interpreted as shading and is distinct from coarse figural similarity textures. Also, perception defined the smallest scale for contour/texture discrimination as eight to nine visual acuity units. Three contour/texture discrimination parameters were found to be moderately successful for this scale discrimination: (1) lightness change in a blurred version of the image, (2) change in lightness change in the original image, and (3) percent change in edge counts relative to local maximum.
AUTOMATIC TEXTURE RECONSTRUCTION OF 3D CITY MODEL FROM OBLIQUE IMAGES

Directory of Open Access Journals (Sweden)

J. Kang

2016-06-01

Full Text Available In recent years, the photorealistic 3D city models are increasingly important in various geospatial applications related to virtual city tourism, 3D GIS, urban planning, real-estate management. Besides the acquisition of high-precision 3D geometric data, texture reconstruction is also a crucial step for generating high-quality and visually realistic 3D models. However, most of the texture reconstruction approaches are probably leading to texture fragmentation and memory inefficiency. In this paper, we introduce an automatic framework of texture reconstruction to generate textures from oblique images for photorealistic visualization. Our approach include three major steps as follows: mesh parameterization, texture atlas generation and texture blending. Firstly, mesh parameterization procedure referring to mesh segmentation and mesh unfolding is performed to reduce geometric distortion in the process of mapping 2D texture to 3D model. Secondly, in the texture atlas generation step, the texture of each segmented region in texture domain is reconstructed from all visible images with exterior orientation and interior orientation parameters. Thirdly, to avoid color discontinuities at boundaries between texture regions, the final texture map is generated by blending texture maps from several corresponding images. We evaluated our texture reconstruction framework on a dataset of a city. The resulting mesh model can get textured by created texture without resampling. Experiment results show that our method can effectively mitigate the occurrence of texture fragmentation. It is demonstrated that the proposed framework is effective and useful for automatic texture reconstruction of 3D city model.

1 CFR 18.7 - Signature.

Science.gov (United States)

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Signature. 18.7 Section 18.7 General Provisions... PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.7 Signature. The original and each duplicate original... stamped beneath the signature. Initialed or impressed signatures will not be accepted. Documents submitted...
Attribute-Based Digital Signature System

NARCIS (Netherlands)

Ibraimi, L.; Asim, Muhammad; Petkovic, M.

2011-01-01

An attribute-based digital signature system comprises a signature generation unit (1) for signing a message (m) by generating a signature (s) based on a user secret key (SK) associated with a set of user attributes, wherein the signature generation unit (1) is arranged for combining the user secret
Max Graf's "Reminiscences of Professor Sigmund Freud" revisited: new evidence from the Freud archives.

Science.gov (United States)

Wakefield, Jerome C

2007-01-01

Recently derestricted Freud Archive interviews with Max and Herbert Graf and Herbert's wife shed new light on Max Graf's article, "Reminiscences of Professor Sigmund Freud," published in The Psychoanalytic Quarterly in 1942. To explain discrepancies between the interviews and the earlier article, the author postulates that, in the article, Max Graf purposely distorted or omitted certain details in order not to reveal Herbert's identity as "Little Hans" (Freud 1909). The interviews place incidents reported in the article in a new and more complex light, and also underscore the intensely personal nature of the intellectual development of the psychoanalytic movement.
On texture formation of chromium electrodeposits

DEFF Research Database (Denmark)

Nielsen, Christian Bergenstof; Leisner, Peter; Horsewell, Andy

1998-01-01

The microstructure, texture and hardness of electrodeposited hard, direct current (DC) chromium and pulsed reversed chromium has been investigated. These investigations suggest that the growth and texture of hard chromium is controlled by inhibition processes and reactions. Further, it has been...
Texture and wettability of metallic lotus leaves

Science.gov (United States)

Frankiewicz, C.; Attinger, D.

2016-02-01

Superhydrophobic surfaces with the self-cleaning behavior of lotus leaves are sought for drag reduction and phase change heat transfer applications. These superrepellent surfaces have traditionally been fabricated by random or deterministic texturing of a hydrophobic material. Recently, superrepellent surfaces have also been made from hydrophilic materials, by deterministic texturing using photolithography, without low-surface energy coating. Here, we show that hydrophilic materials can also be made superrepellent to water by chemical texturing, a stochastic rather than deterministic process. These metallic surfaces are the first analog of lotus leaves, in terms of wettability, texture and repellency. A mechanistic model is also proposed to describe the influence of multiple tiers of roughness on wettability and repellency. This demonstrated ability to make hydrophilic materials superrepellent without deterministic structuring or additional coatings opens the way to large scale and robust manufacturing of superrepellent surfaces.Superhydrophobic surfaces with the self-cleaning behavior of lotus leaves are sought for drag reduction and phase change heat transfer applications. These superrepellent surfaces have traditionally been fabricated by random or deterministic texturing of a hydrophobic material. Recently, superrepellent surfaces have also been made from hydrophilic materials, by deterministic texturing using photolithography, without low-surface energy coating. Here, we show that hydrophilic materials can also be made superrepellent to water by chemical texturing, a stochastic rather than deterministic process. These metallic surfaces are the first analog of lotus leaves, in terms of wettability, texture and repellency. A mechanistic model is also proposed to describe the influence of multiple tiers of roughness on wettability and repellency. This demonstrated ability to make hydrophilic materials superrepellent without deterministic structuring or additional
Personal reminiscences of the Kaiser Wilhelm Institute, Berlin, 1937/38 and of the nuclear project in Canada, 1944/56

International Nuclear Information System (INIS)

Cook, L.G.

1989-01-01

Part 1 of this talk deals with reminiscences from the Kaiser Wilhelm Institute in Berlin during the period 1937-1938. Topics include the course of experimental events and the continuing search for interpretations that would stand up, the guiding influence of the work of Irene Curie and Pvale Savic on the experimental work of Hahn and Strassmann, the influence and effects of Nazi political pressures within the Institute, the shadows of war, and how uranium fission finally got itself discovered. Part 2 gives reminiscences from the Nuclear Project in Canada from 1944 to 1956 as an extension of the pre-war work in Paris - both in concept and in personnel - created by British effort, the powerful changing US influences, the shift to British direction and a goal, the world's first high power heavy water moderated reactor for the production of massive quantities of synthetic radioactive materials, extraction processes including those for plutonium, the shift to Canadian direction and goals, a heavy water moderated electricity production system, and a postscript
A quasi-in-situ EBSD observation of the transformation from rolling texture to recrystallization texture in V-4Cr-4Ti alloy

Energy Technology Data Exchange (ETDEWEB)

Peng, Lixia [Institute of Materials Research, China Academy of Engineering Physics, Jiangyou, Sichuan Province 621908 (China); Li, Xiongwei [Institute of Metal Research, China Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China); Fan, Zhijian [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang, Sichuan Province 621900 (China); Jiang, Chunli; Zhou, Ping [Institute of Materials Research, China Academy of Engineering Physics, Jiangyou, Sichuan Province 621908 (China); Lai, Xinchun, E-mail: laixinchun@caep.cn [Institute of Materials Research, China Academy of Engineering Physics, Jiangyou, Sichuan Province 621908 (China)

2017-04-15

Recrystallization texture evolution of rolled V-4Cr-4Ti alloy has been investigated by quasi-in-situ EBSD (electron back-scattering diffraction) method. Concurrently, the precipitates were characterized by SEM (Scanning Electron Microscopy). It was found that both the initial rolling textures and the distribution of the precipitates affected the formation of the recrystallization texture. It was revealed that the texture transformations of (558) 〈110〉 + (665) 〈110〉 to (334) 〈483〉 + (665) 〈1 1 2.4〉 were possibly attributed to the selective drag induced by the sparsely dispersed Ti-rich precipitates. While the densely distributed Ti-rich precipitates were responsible for the randomized recrystallization texture. Finally, when the precipitates were absent, the orientation changes from (112) 〈110〉 and (558) 〈110〉 to (111) 〈112〉 and (001) <110> to (001) <520> were observed. - Highlights: • Micro recrystallization texture evolution in V-4Cr-4Ti alloys is reported for the first time. • The volume fraction of Ti-rich precipitates has significant effect on the recrystallization texture evolution. • The dissolution of the Ti-rich precipitates above 1100 °C induces the strengthening of (111) <112> texture.
Texture design for light touch perception

NARCIS (Netherlands)

Zhang, S.; Zeng, X.; Matthews, D.T.A.; Igartua, A.; Rodriguez Vidal, E.; Fortes, J. Contreras; Van Der Heide, E.

This study focused on active light touch with predefined textures specially-designed for tactile perception. The counter-body material is stainless steel sheet. Three geometric structures (grid, crater and groove) were fabricated by pulsed laser surface texturing. A total number of twenty volunteers
Fair quantum blind signatures

International Nuclear Information System (INIS)

Tian-Yin, Wang; Qiao-Yan, Wen

2010-01-01

We present a new fair blind signature scheme based on the fundamental properties of quantum mechanics. In addition, we analyse the security of this scheme, and show that it is not possible to forge valid blind signatures. Moreover, comparisons between this scheme and public key blind signature schemes are also discussed. (general)
Synthesis of nano-textured biocompatible scaffolds from chicken eggshells

International Nuclear Information System (INIS)

Asghar, Waseem; Ilyas, Azhar; Sankaran, Jeyantt; Wan Yuan; Iqbal, Samir M; Kim, Young-Tae

2012-01-01

Cell adhesion, morphology and growth are influenced by surface topography at nano and micrometer scales. Nano-textured surfaces are prepared using photolithography, plasma etching and long polymer chemical etching which are cost prohibitive and require specialized equipment. This article demonstrates a simple approach to synthesize nano-textured scaffolds from chicken eggshells. Varieties of pattern are made on the eggshells like micro-needle forests and nanopores, giving very uniform nano-textures to the surfaces. The surfaces are characterized for chemical composition and crystal phase. The novel patterns are transferred to PDMS surfaces and the nano-textured PDMS surfaces are used to study the effect of texturing on human fibroblast cell growth and attachment. The effects of surface topographies, along with laminin coating on cell cultures, are also studied. We find an exciting phenomenon that the initial seeding density of the fibroblast cells affects the influence of the nano-texturing on cell growth. These nano-textured surfaces give 16 times more fibroblast growth when compared to flat PDMS surfaces. The novel nano-textured patterns also double the laminin adsorption on PDMS. (paper)
Visual texture perception via graph-based semi-supervised learning

Science.gov (United States)

Zhang, Qin; Dong, Junyu; Zhong, Guoqiang

2018-04-01

Perceptual features, for example direction, contrast and repetitiveness, are important visual factors for human to perceive a texture. However, it needs to perform psychophysical experiment to quantify these perceptual features' scale, which requires a large amount of human labor and time. This paper focuses on the task of obtaining perceptual features' scale of textures by small number of textures with perceptual scales through a rating psychophysical experiment (what we call labeled textures) and a mass of unlabeled textures. This is the scenario that the semi-supervised learning is naturally suitable for. This is meaningful for texture perception research, and really helpful for the perceptual texture database expansion. A graph-based semi-supervised learning method called random multi-graphs, RMG for short, is proposed to deal with this task. We evaluate different kinds of features including LBP, Gabor, and a kind of unsupervised deep features extracted by a PCA-based deep network. The experimental results show that our method can achieve satisfactory effects no matter what kind of texture features are used.
Five Guidelines for Selecting Hydrological Signatures

Science.gov (United States)

McMillan, H. K.; Westerberg, I.; Branger, F.

2017-12-01

Hydrological signatures are index values derived from observed or modeled series of hydrological data such as rainfall, flow or soil moisture. They are designed to extract relevant information about hydrological behavior, such as to identify dominant processes, and to determine the strength, speed and spatiotemporal variability of the rainfall-runoff response. Hydrological signatures play an important role in model evaluation. They allow us to test whether particular model structures or parameter sets accurately reproduce the runoff generation processes within the watershed of interest. Most modeling studies use a selection of different signatures to capture different aspects of the catchment response, for example evaluating overall flow distribution as well as high and low flow extremes and flow timing. Such studies often choose their own set of signatures, or may borrow subsets of signatures used in multiple other works. The link between signature values and hydrological processes is not always straightforward, leading to uncertainty and variability in hydrologists' signature choices. In this presentation, we aim to encourage a more rigorous approach to hydrological signature selection, which considers the ability of signatures to represent hydrological behavior and underlying processes for the catchment and application in question. To this end, we propose a set of guidelines for selecting hydrological signatures. We describe five criteria that any hydrological signature should conform to: Identifiability, Robustness, Consistency, Representativeness, and Discriminatory Power. We describe an example of the design process for a signature, assessing possible signature designs against the guidelines above. Due to their ubiquity, we chose a signature related to the Flow Duration Curve, selecting the FDC mid-section slope as a proposed signature to quantify catchment overall behavior and flashiness. We demonstrate how assessment against each guideline could be used to
Strings, texture, and inflation

International Nuclear Information System (INIS)

Hodges, H.M.; Primack, J.R.

1991-01-01

We examine mechanisms, several of which are proposed here, to generate structure formation, or to just add large-scale features, through either gauged or global cosmic strings or global texture, within the framework of inflation. We first explore the possibility that strings or texture form if there is no coupling between the topological theory and the inflaton or spacetime curvature, via (1) quantum creation, and (2) a sufficiently high reheat temperature. In addition, we examine the prospects for the inflaton field itself to generate strings or texture. Then, models with the string/texture field coupled to the curvature, and an equivalent model with coupling to the inflaton field, are considered in detail. The requirement that inflationary density fluctuations are not so large as to conflict with observations leads to a number of constraints on model parameters. We find that strings of relevance for structure formation can form in the absence of coupling to the inflaton or curvature through the process of quantum creation, but only if the strings are strongly type I, or if they are global strings. If formed after reheating, naturalness suggests that gauged cosmic strings correspond to a type-I superconductor. Similarly, gauged strings formed during inflation via conformal coupling ξ=1/6 to the spacetime curvature (in a model suggested by Yokoyama in order to evade the millisecond pulsar constraint on cosmic strings) are expected to be strongly type I
A Mobile Multimedia Reminiscence Therapy Application to Reduce Behavioral and Psychological Symptoms in Persons with Alzheimer’s

Directory of Open Access Journals (Sweden)

Danish Imtiaz

2018-01-01

Full Text Available The goal of this project is to develop a novel and innovative mobile solution to address behavioral and psychological symptoms of dementia (BPSD that occur in individuals with Alzheimer’s. BPSD can include agitation, restlessness, aggression, apathy, obsessive-compulsive and repetitive behaviors, hallucinations, delusions, paranoia, and wandering. Alzheimer’s currently affects 5.4 million adults in the United States and that number is projected to increase to 14 million by 2050. Almost 90% of all affected with AD experience BPSD, resulting in increased healthcare costs, heavier burden on caregivers, poor patient outcomes, early nursing home placement, long-term hospitalizations, and misuse of medications. Pharmacological support may have undesirable side effects such as sedation. Nonpharmacological interventions are alternative solutions that have shown to be effective without undesirable side effects. Music therapy has been found to lower BPSD symptoms significantly. Our study is based on combination of the reminiscence and the music therapies where past memorable events are recalled using prompts such as photos, videos, and music. We are proposing a mobile multimedia solution, a technical version of the combined reminiscence, and music therapies to prevent the occurrence of BPSD, especially for the rural population who have reduced access to dementia care services.
Texture Analysis Using Rényi’s Generalized Entropies

NARCIS (Netherlands)

Grigorescu, S.E.; Petkov, N.

2003-01-01

We propose a texture analysis method based on Rényi’s generalized entropies. The method aims at identifying texels in regular textures by searching for the smallest window through which the minimum number of different visual patterns is observed when moving the window over a given texture. The
Texture of fermion mass matrices in partially unified theories

International Nuclear Information System (INIS)

Dutta, B.; Texas Univ., Austin, TX; Nandi, S.; Texas Univ., Austin, TX

1996-01-01

We investigate the texture of fermion mass matrices in theories with partial unification (for example, SU(2) L x SU(2) R x SU(4) c ) at a scale of ∼ 10 12 GeV. Starting with the low energy values of the masses and the mixing angles, we find only two viable textures with at most four texture zeros. One of these corresponds to a somewhat modified Fritzsch textures. A theoretical derivation of these textures leads to new interesting relations among the masses and the mixing angles. 13 refs
Neutrino mass textures with maximal CP violation

International Nuclear Information System (INIS)

Aizawa, Ichiro; Kitabayashi, Teruyuki; Yasue, Masaki

2005-01-01

We show three types of neutrino mass textures, which give maximal CP violation as well as maximal atmospheric neutrino mixing. These textures are described by six real mass parameters: one specified by two complex flavor neutrino masses and two constrained ones and the others specified by three complex flavor neutrino masses. In each texture, we calculate mixing angles and masses, which are consistent with observed data, as well as Majorana CP phases
Adaptive Texture Synthesis for Large Scale City Modeling

Science.gov (United States)

Despine, G.; Colleu, T.

2015-02-01

Large scale city models textured with aerial images are well suited for bird-eye navigation but generally the image resolution does not allow pedestrian navigation. One solution to face this problem is to use high resolution terrestrial photos but it requires huge amount of manual work to remove occlusions. Another solution is to synthesize generic textures with a set of procedural rules and elementary patterns like bricks, roof tiles, doors and windows. This solution may give realistic textures but with no correlation to the ground truth. Instead of using pure procedural modelling we present a method to extract information from aerial images and adapt the texture synthesis to each building. We describe a workflow allowing the user to drive the information extraction and to select the appropriate texture patterns. We also emphasize the importance to organize the knowledge about elementary pattern in a texture catalogue allowing attaching physical information, semantic attributes and to execute selection requests. Roofs are processed according to the detected building material. Façades are first described in terms of principal colours, then opening positions are detected and some window features are computed. These features allow selecting the most appropriate patterns from the texture catalogue. We experimented this workflow on two samples with 20 cm and 5 cm resolution images. The roof texture synthesis and opening detection were successfully conducted on hundreds of buildings. The window characterization is still sensitive to the distortions inherent to the projection of aerial images onto the facades.
Hyperbolic planforms in relation to visual edges and textures perception.

Directory of Open Access Journals (Sweden)

Pascal Chossat

2009-12-01

Full Text Available We propose to use bifurcation theory and pattern formation as theoretical probes for various hypotheses about the neural organization of the brain. This allows us to make predictions about the kinds of patterns that should be observed in the activity of real brains through, e.g., optical imaging, and opens the door to the design of experiments to test these hypotheses. We study the specific problem of visual edges and textures perception and suggest that these features may be represented at the population level in the visual cortex as a specific second-order tensor, the structure tensor, perhaps within a hypercolumn. We then extend the classical ring model to this case and show that its natural framework is the non-Euclidean hyperbolic geometry. This brings in the beautiful structure of its group of isometries and certain of its subgroups which have a direct interpretation in terms of the organization of the neural populations that are assumed to encode the structure tensor. By studying the bifurcations of the solutions of the structure tensor equations, the analog of the classical Wilson and Cowan equations, under the assumption of invariance with respect to the action of these subgroups, we predict the appearance of characteristic patterns. These patterns can be described by what we call hyperbolic or H-planforms that are reminiscent of Euclidean planar waves and of the planforms that were used in previous work to account for some visual hallucinations. If these patterns could be observed through brain imaging techniques they would reveal the built-in or acquired invariance of the neural organization to the action of the corresponding subgroups.
Extreme Compression and Modeling of Bidirectional Texture Function

Czech Academy of Sciences Publication Activity Database

Haindl, Michal; Filip, Jiří

2007-01-01

Roč. 29, č. 10 (2007), s. 1859-1865 ISSN 0162-8828 R&D Projects: GA AV ČR 1ET400750407; GA MŠk 1M0572; GA AV ČR IAA2075302 EU Projects: European Commission(XE) 507752 - MUSCLE Grant - others:GA MŠk(CZ) 2C06019 Institutional research plan: CEZ:AV0Z10750506 Keywords : Rough texture * 3D texture * BTF * texture synthesis * texture modeling * data compression Subject RIV: BD - Theory of Information Impact factor: 3.579, year: 2007 http://doi.ieeecomputersociety.org/10.1109/TPAMI.2007.1139

Through-process modelling of texture and anisotropy in AA5182

Science.gov (United States)

Crumbach, M.; Neumann, L.; Goerdeler, M.; Aretz, H.; Gottstein, G.; Kopp, R.

2006-07-01

A through-process texture and anisotropy prediction for AA5182 sheet production from hot rolling through cold rolling and annealing is reported. Thermo-mechanical process data predicted by the finite element method (FEM) package T-Pack based on the software LARSTRAN were fed into a combination of physics based microstructure models for deformation texture (GIA), work hardening (3IVM), nucleation texture (ReNuc), and recrystallization texture (StaRT). The final simulated sheet texture was fed into a FEM simulation of cup drawing employing a new concept of interactively updated texture based yield locus predictions. The modelling results of texture development and anisotropy were compared to experimental data. The applicability to other alloys and processes is discussed.
Extraction of Homogeneous Fine-Grained Texture Segments in Visual Images

Czech Academy of Sciences Publication Activity Database

Golcev, A.; Gritsenko, V.; Húsek, Dušan

2017-01-01

Roč. 27, č. 5 (2017), s. 447-477 ISSN 1210-0552 Institutional support: RVO:67985807 Keywords : texture feature * texture window * homogeneous fine-grained texture segment * extraction of texture segment * texture segmentation * ”float” coding method Subject RIV: IN - Informatics, Computer Science OBOR OECD: Computer sciences, information science, bioinformathics (hardware development to be 2.2, social aspect to be 5.8) Impact factor: 0.394, year: 2016
Shape-Tailored Features and their Application to Texture Segmentation

KAUST Repository

Khan, Naeemullah

2014-04-01

Texture Segmentation is one of the most challenging areas of computer vision. One reason for this difficulty is the huge variety and variability of textures occurring in real world, making it very difficult to quantitatively study textures. One of the key tools used for texture segmentation is local invariant descriptors. Texture consists of textons, the basic building block of textures, that may vary by small nuisances like illumination variation, deformations, and noise. Local invariant descriptors are robust to these nuisances making them beneficial for texture segmentation. However, grouping dense descriptors directly for segmentation presents a problem: existing descriptors aggregate data from neighborhoods that may contain different textured regions, making descriptors from these neighborhoods difficult to group, leading to significant errors in segmentation. This work addresses this issue by proposing dense local descriptors, called Shape-Tailored Features, which are tailored to an arbitrarily shaped region, aggregating data only within the region of interest. Since the segmentation, i.e., the regions, are not known a-priori, we propose a joint problem for Shape-Tailored Features and the regions. We present a framework based on variational methods. Extensive experiments on a new large texture dataset, which we introduce, show that the joint approach with Shape-Tailored Features leads to better segmentations over the non-joint non Shape-Tailored approach, and the method out-performs existing state-of-the-art.
Quantum messages with signatures forgeable in arbitrated quantum signature schemes

International Nuclear Information System (INIS)

Kim, Taewan; Choi, Jeong Woon; Jho, Nam-Su; Lee, Soojoon

2015-01-01

Even though a method to perfectly sign quantum messages has not been known, the arbitrated quantum signature scheme has been considered as one of the good candidates. However, its forgery problem has been an obstacle to the scheme becoming a successful method. In this paper, we consider one situation, which is slightly different from the forgery problem, that we use to check whether at least one quantum message with signature can be forged in a given scheme, although all the messages cannot be forged. If there are only a finite number of forgeable quantum messages in the scheme, then the scheme can be secured against the forgery attack by not sending forgeable quantum messages, and so our situation does not directly imply that we check whether the scheme is secure against the attack. However, if users run a given scheme without any consideration of forgeable quantum messages, then a sender might transmit such forgeable messages to a receiver and in such a case an attacker can forge the messages if the attacker knows them. Thus it is important and necessary to look into forgeable quantum messages. We show here that there always exists such a forgeable quantum message-signature pair for every known scheme with quantum encryption and rotation, and numerically show that there are no forgeable quantum message-signature pairs that exist in an arbitrated quantum signature scheme. (paper)
The reminiscence bump without memories: The distribution of imagined word-cued and important autobiographical memories in a hypothetical 70-year-old

DEFF Research Database (Denmark)

Koppel, Jonathan; Berntsen, Dorthe

2016-01-01

The reminiscence bump is the disproportionate number of autobiographical memories dating from adolescence and early adulthood. It has often been ascribed to a consolidation of the mature self in the period covered by the bump. Here we stripped away factors relating to the characteristics of autob...
Reminiscence Spike in Reading Recall between the Ages of 8-11: The Influence of Early Memories on Attitudes and Actions

Science.gov (United States)

Freestone, Margaret; O'Toole, J. Mitchell

2016-01-01

An investigation into the recalled reading of 31 environmental educators has uncovered a potential link between early reading and pro-environmental attitudes. The recalled books are not only from the recognised "reminiscence bump" of adolescence and early adulthood, but there also appears to be a spike in recall of books within the…
TOPICAL REVIEW Textured silicon nitride: processing and anisotropic properties

Directory of Open Access Journals (Sweden)

Xinwen Zhu and Yoshio Sakka

2008-01-01

Full Text Available Textured silicon nitride (Si3N4 has been intensively studied over the past 15 years because of its use for achieving its superthermal and mechanical properties. In this review we present the fundamental aspects of the processing and anisotropic properties of textured Si3N4, with emphasis on the anisotropic and abnormal grain growth of β-Si3N4, texture structure and texture analysis, processing methods and anisotropic properties. On the basis of the texturing mechanisms, the processing methods described in this article have been classified into two types: hot-working (HW and templated grain growth (TGG. The HW method includes the hot-pressing, hot-forging and sinter-forging techniques, and the TGG method includes the cold-pressing, extrusion, tape-casting and strong magnetic field alignment techniques for β-Si3N4 seed crystals. Each processing technique is thoroughly discussed in terms of theoretical models and experimental data, including the texturing mechanisms and the factors affecting texture development. Also, methods of synthesizing the rodlike β-Si3N4 single crystals are presented. Various anisotropic properties of textured Si3 N4 and their origins are thoroughly described and discussed, such as hardness, elastic modulus, bending strength, fracture toughness, fracture energy, creep behavior, tribological and wear behavior, erosion behavior, contact damage behavior and thermal conductivity. Models are analyzed to determine the thermal anisotropy by considering the intrinsic thermal anisotropy, degree of orientation and various microstructure factors. Textured porous Si3N4 with a unique microstructure composed of oriented elongated β-Si3N4 and anisotropic pores is also described for the first time, with emphasis on its unique mechanical and thermal-mechanical properties. Moreover, as an important related material, textured α-Sialon is also reviewed, because the presence of elongated α-Sialon grains allows the production of textured �
The reminiscence bump without memories: The distribution of imagined word-cued and important autobiographical memories in a hypothetical 70-year-old.

Science.gov (United States)

Koppel, Jonathan; Berntsen, Dorthe

2016-08-01

The reminiscence bump is the disproportionate number of autobiographical memories dating from adolescence and early adulthood. It has often been ascribed to a consolidation of the mature self in the period covered by the bump. Here we stripped away factors relating to the characteristics of autobiographical memories per se, most notably factors that aid in their encoding or retention, by asking students to generate imagined word-cued and imagined 'most important' autobiographical memories of a hypothetical, prototypical 70-year-old of their own culture and gender. We compared the distribution of these fictional memories with the distributions of actual word-cued and most important autobiographical memories in a sample of 61-70-year-olds. We found a striking similarity between the temporal distributions of the imagined memories and the actual memories. These results suggest that the reminiscence bump is largely driven by constructive, schematic factors at retrieval, thereby challenging most existing theoretical accounts. Copyright © 2016 Elsevier Inc. All rights reserved.
Tribological Behavior of Laser Textured Hot Stamping Dies

Directory of Open Access Journals (Sweden)

Andre Shihomatsu

2016-01-01

Full Text Available Hot stamping of high strength steels has been continuously developed in the automotive industry to improve mechanical properties and surface quality of stamped components. One of the main challenges faced by researchers and technicians is to improve stamping dies lifetime by reducing the wear caused by high pressures and temperatures present during the process. This paper analyzes the laser texturing of hot stamping dies and discusses how different surfaces textures influence the lubrication and wear mechanisms. To this purpose, experimental tests and numerical simulation were carried out to define the die region to be texturized and to characterize the textured surface topography before and after hot stamping tests with a 3D surface profilometer and scanning electron microscopy. Results showed that laser texturing influences the lubrication at the interface die-hot sheet and improves die lifetime. In this work, the best texture presented dimples with the highest diameter, depth, and spacing, with the surface topography and dimples morphology practically preserved after the hot stamping tests.
Neutronographic Texture Analysis of Zirconium Based Alloys

International Nuclear Information System (INIS)

Kruz'elová, M; Vratislav, S; Kalvoda, L; Dlouhá, M

2012-01-01

Neutron diffraction is a very powerful tool in texture analysis of zirconium based alloys used in nuclear technique. Textures of five samples (two rolled sheets and three tubes) were investigated by using basal pole figures, inversion pole figures, and ODF distribution function. The texture measurement was performed at diffractometer KSN2 on the Laboratory of Neutron Diffraction, Department of Solid State Engineering, Faculty of Nuclear Sciences and Physical Engineering, CTU in Prague. Procedures for studying textures with thermal neutrons and procedures for obtaining texture parameters (direct and inverse pole figures, three dimensional orientation distribution function) are also described. Observed data were processed by software packages HEXAL and GSAS. Our results can be summarized as follows: i) All samples of zirconium alloys show the distribution of middle area into two maxima in basal pole figures. This is caused by alloying elements. A characteristic split of the basal pole maxima tilted from the normal direction toward the transverse direction can be observed for all samples, ii) Sheet samples prefer orientation of planes (100) and (110) perpendicular to rolling direction and orientation of planes (002) perpendicular to normal direction, iii) Basal planes of tubes are oriented parallel to tube axis, meanwhile (100) planes are oriented perpendicular to tube axis. Level of resulting texture and maxima position is different for tubes and for sheets. The obtained results are characteristic for zirconium based alloys.
ADAPTIVE TEXTURE SYNTHESIS FOR LARGE SCALE CITY MODELING

Directory of Open Access Journals (Sweden)

G. Despine

2015-02-01

Full Text Available Large scale city models textured with aerial images are well suited for bird-eye navigation but generally the image resolution does not allow pedestrian navigation. One solution to face this problem is to use high resolution terrestrial photos but it requires huge amount of manual work to remove occlusions. Another solution is to synthesize generic textures with a set of procedural rules and elementary patterns like bricks, roof tiles, doors and windows. This solution may give realistic textures but with no correlation to the ground truth. Instead of using pure procedural modelling we present a method to extract information from aerial images and adapt the texture synthesis to each building. We describe a workflow allowing the user to drive the information extraction and to select the appropriate texture patterns. We also emphasize the importance to organize the knowledge about elementary pattern in a texture catalogue allowing attaching physical information, semantic attributes and to execute selection requests. Roofs are processed according to the detected building material. Façades are first described in terms of principal colours, then opening positions are detected and some window features are computed. These features allow selecting the most appropriate patterns from the texture catalogue. We experimented this workflow on two samples with 20 cm and 5 cm resolution images. The roof texture synthesis and opening detection were successfully conducted on hundreds of buildings. The window characterization is still sensitive to the distortions inherent to the projection of aerial images onto the facades.
Electrochemically grown rough-textured nanowires

International Nuclear Information System (INIS)

Tyagi, Pawan; Postetter, David; Saragnese, Daniel; Papadakis, Stergios J.; Gracias, David H.

2010-01-01

Nanowires with a rough surface texture show unusual electronic, optical, and chemical properties; however, there are only a few existing methods for producing these nanowires. Here, we describe two methods for growing both free standing and lithographically patterned gold (Au) nanowires with a rough surface texture. The first strategy is based on the deposition of nanowires from a silver (Ag)-Au plating solution mixture that precipitates an Ag-Au cyanide complex during electrodeposition at low current densities. This complex disperses in the plating solution, thereby altering the nanowire growth to yield a rough surface texture. These nanowires are mass produced in alumina membranes. The second strategy produces long and rough Au nanowires on lithographically patternable nickel edge templates with corrugations formed by partial etching. These rough nanowires can be easily arrayed and integrated with microscale devices.
Forest Classification Based on Forest texture in Northwest Yunnan Province

Science.gov (United States)

Wang, Jinliang; Gao, Yan; Wang, Xiaohua; Fu, Lei

2014-03-01

Forest texture is an intrinsic characteristic and an important visual feature of a forest ecological system. Full utilization of forest texture will be a great help in increasing the accuracy of forest classification based on remote sensed data. Taking Shangri-La as a study area, forest classification has been based on the texture. The results show that: (1) From the texture abundance, texture boundary, entropy as well as visual interpretation, the combination of Grayscale-gradient co-occurrence matrix and wavelet transformation is much better than either one of both ways of forest texture information extraction; (2) During the forest texture information extraction, the size of the texture-suitable window determined by the semi-variogram method depends on the forest type (evergreen broadleaf forest is 3×3, deciduous broadleaf forest is 5×5, etc.). (3)While classifying forest based on forest texture information, the texture factor assembly differs among forests: Variance Heterogeneity and Correlation should be selected when the window is between 3×3 and 5×5 Mean, Correlation, and Entropy should be used when the window in the range of 7×7 to 19×19 and Correlation, Second Moment, and Variance should be used when the range is larger than 21×21.
Forest Classification Based on Forest texture in Northwest Yunnan Province

International Nuclear Information System (INIS)

Wang, Jinliang; Gao, Yan; Fu, Lei; Wang, Xiaohua

2014-01-01

Forest texture is an intrinsic characteristic and an important visual feature of a forest ecological system. Full utilization of forest texture will be a great help in increasing the accuracy of forest classification based on remote sensed data. Taking Shangri-La as a study area, forest classification has been based on the texture. The results show that: (1) From the texture abundance, texture boundary, entropy as well as visual interpretation, the combination of Grayscale-gradient co-occurrence matrix and wavelet transformation is much better than either one of both ways of forest texture information extraction; (2) During the forest texture information extraction, the size of the texture-suitable window determined by the semi-variogram method depends on the forest type (evergreen broadleaf forest is 3×3, deciduous broadleaf forest is 5×5, etc.). (3)While classifying forest based on forest texture information, the texture factor assembly differs among forests: Variance Heterogeneity and Correlation should be selected when the window is between 3×3 and 5×5; Mean, Correlation, and Entropy should be used when the window in the range of 7×7 to 19×19; and Correlation, Second Moment, and Variance should be used when the range is larger than 21×21
Shape and Texture Based Classification of Fish Species

DEFF Research Database (Denmark)

Larsen, Rasmus; Ólafsdóttir, Hildur; Ersbøll, Bjarne Kjær

2009-01-01

In this paper we conduct a case study of ¯sh species classi- fication based on shape and texture. We consider three fish species: cod, haddock, and whiting. We derive shape and texture features from an appearance model of a set of training data. The fish in the training images were manual outlined......, and a few features including the eye and backbone contour were also annotated. From these annotations an optimal MDL curve correspondence and a subsequent image registration were derived. We have analyzed a series of shape and texture and combined shape and texture modes of variation for their ability...
Associations Between PET Textural Features and GLUT1 Expression, and the Prognostic Significance of Textural Features in Lung Adenocarcinoma.

Science.gov (United States)

Koh, Young Wha; Park, Seong Yong; Hyun, Seung Hyup; Lee, Su Jin

2018-02-01

We evaluated the association between positron emission tomography (PET) textural features and glucose transporter 1 (GLUT1) expression level and further investigated the prognostic significance of textural features in lung adenocarcinoma. We evaluated 105 adenocarcinoma patients. We extracted texture-based PET parameters of primary tumors. Conventional PET parameters were also measured. The relationships between PET parameters and GLUT1 expression levels were evaluated. The association between PET parameters and overall survival (OS) was assessed using Cox's proportional hazard regression models. In terms of PET textural features, tumors expressing high levels of GLUT1 exhibited significantly lower coarseness, contrast, complexity, and strength, but significantly higher busyness. On univariate analysis, the metabolic tumor volume, total lesion glycolysis, contrast, busyness, complexity, and strength were significant predictors of OS. Multivariate analysis showed that lower complexity (HR=2.017, 95%CI=1.032-3.942, p=0.040) was independently associated with poorer survival. PET textural features may aid risk stratification in lung adenocarcinoma patients. Copyright© 2018, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.
Line Laser and Triple Laser Quantification of the Difference in International Roughness Index between Textured and Non-Textured Strips

Science.gov (United States)

2017-07-01

Practitioners have often wondered whether, during ride measurement with inertial devices, the motion of the laser through pavement texture introduces non representative values of international roughness index (IRI), particularly in certain textures. ...
Uncertainty in hydrological signatures

Science.gov (United States)

McMillan, Hilary; Westerberg, Ida

2015-04-01

Information that summarises the hydrological behaviour or flow regime of a catchment is essential for comparing responses of different catchments to understand catchment organisation and similarity, and for many other modelling and water-management applications. Such information types derived as an index value from observed data are known as hydrological signatures, and can include descriptors of high flows (e.g. mean annual flood), low flows (e.g. mean annual low flow, recession shape), the flow variability, flow duration curve, and runoff ratio. Because the hydrological signatures are calculated from observed data such as rainfall and flow records, they are affected by uncertainty in those data. Subjective choices in the method used to calculate the signatures create a further source of uncertainty. Uncertainties in the signatures may affect our ability to compare different locations, to detect changes, or to compare future water resource management scenarios. The aim of this study was to contribute to the hydrological community's awareness and knowledge of data uncertainty in hydrological signatures, including typical sources, magnitude and methods for its assessment. We proposed a generally applicable method to calculate these uncertainties based on Monte Carlo sampling and demonstrated it for a variety of commonly used signatures. The study was made for two data rich catchments, the 50 km2 Mahurangi catchment in New Zealand and the 135 km2 Brue catchment in the UK. For rainfall data the uncertainty sources included point measurement uncertainty, the number of gauges used in calculation of the catchment spatial average, and uncertainties relating to lack of quality control. For flow data the uncertainty sources included uncertainties in stage/discharge measurement and in the approximation of the true stage-discharge relation by a rating curve. The resulting uncertainties were compared across the different signatures and catchments, to quantify uncertainty
Effectiveness of a structured education reminiscence-based programme for staff on the quality of life of residents with dementia in long-stay units: A study protocol for a cluster randomised trial

LENUS (Irish Health Repository)

O'Shea, Eamon

2011-02-14

Abstract Background Current projections indicate that there will be a significant increase in the number of people with dementia in Ireland, from approximately 40,000 at present to 100,000 by 2036. Psychosocial interventions, such as reminiscence, have the potential to improve the quality of life of people with dementia. However, while reminiscence is used widely in dementia care, its impact on the quality of life of people with dementia remains largely undocumented and there is a need for a robust and fair assessment of its overall effectiveness. The DementiA education programme incorporating REminiscence for Staff study will evaluate the effectiveness of a structured reminiscence-based education programme for care staff on the quality of life of residents with dementia in long-stay units. Methods\\/Design The study is a two-group, single-blind cluster randomised trial conducted in public and private long-stay residential settings in Ireland. Randomisation to control and intervention is at the level of the long-stay residential unit. Sample size calculations suggest that 18 residential units each containing 17 people with dementia are required for randomisation to control and intervention groups to achieve power of at least 80% with alpha levels of 0.05. Each resident in the intervention group is linked with a nurse and care assistant who have taken the structured reminiscence-based education programme. Participants in the control group will receive usual care. The primary outcome is quality of life of residents as measured by the Quality of Life-AD instrument. Secondary outcomes include agitation, depression and carer burden. Blinded outcome assessment is undertaken at baseline and at 18-22 weeks post-randomisation. Discussion Trials on reminiscence-based interventions for people with dementia have been scarce and the quality of the information arising from those that have been done has been undermined by methodological problems, particularly in relation to scale
Phosphorous gettering in acidic textured multicrystalline solar cells

Energy Technology Data Exchange (ETDEWEB)

Montesdeoca-Santana, A. [Departamento de Fisica Basica, Universidad de La Laguna (ULL), Avenida Astrofisico Francisco Sanchez 2, 38206 La Laguna, S/C de Tenerife (Spain); Fraunhofer Institut fuer Solare Energiesysteme ISE, Laboratory and Servicecenter Gelsenkirchen, Auf der Reihe 2, 45884 Gelsenkirchen (Germany); Jimenez-Rodriguez, E.; Diaz-Herrera, B.; Hernandez-Rodriguez, C. [Departamento de Fisica Basica, Universidad de La Laguna (ULL), Avenida Astrofisico Francisco Sanchez 2, 38206 La Laguna, S/C de Tenerife (Spain); Gonzalez-Diaz, B. [Departamento de Fisica Basica, Universidad de La Laguna (ULL), Avenida Astrofisico Francisco Sanchez 2, 38206 La Laguna, S/C de Tenerife (Spain); Departamento de Energia Fotovoltaica, Instituto Tecnologico y de Energias Renovables. Poligono Industrial de Granadilla s/n, 38600 San Isidro-Granadilla de Abona, S/C de Tenerife (Spain); Rinio, M.; Borchert, D. [Fraunhofer Institut fuer Solare Energiesysteme ISE, Laboratory and Servicecenter Gelsenkirchen, Auf der Reihe 2, 45884 Gelsenkirchen (Germany); Guerrero-Lemus, R. [Departamento de Fisica Basica, Universidad de La Laguna (ULL), Avenida Astrofisico Francisco Sanchez 2, 38206 La Laguna, S/C de Tenerife (Spain); Fundacion de Estudios de Economia Aplicada, Catedra Focus-Abengoa, Jorge Juan 46, 28001 Madrid (Spain)

2011-03-15

The influence of phosphorus gettering is studied in this work applied to an acidic textured multicrystalline silicon substrate. The texturization was achieved with an HF/HNO{sub 3} solution leading to nanostructures on the silicon surface. It has been demonstrated in previous works that this textured surface decreases the reflectance on the solar cell and increases the surface area improving the photon collection and enhancing the short circuit current. The present study investigates the effect on the minority carrier lifetime of the phosphorous diffusion when it is carried out on this textured surface. The lifetime is measured by means microwave photoconductance decay and quasi steady state phototoconductance devices. The diffused textured wafers are used to fabricate solar cells and their electrical parameters are analyzed. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

SHAPE FROM TEXTURE USING LOCALLY SCALED POINT PROCESSES

Directory of Open Access Journals (Sweden)

Eva-Maria Didden

2015-09-01

Full Text Available Shape from texture refers to the extraction of 3D information from 2D images with irregular texture. This paper introduces a statistical framework to learn shape from texture where convex texture elements in a 2D image are represented through a point process. In a first step, the 2D image is preprocessed to generate a probability map corresponding to an estimate of the unnormalized intensity of the latent point process underlying the texture elements. The latent point process is subsequently inferred from the probability map in a non-parametric, model free manner. Finally, the 3D information is extracted from the point pattern by applying a locally scaled point process model where the local scaling function represents the deformation caused by the projection of a 3D surface onto a 2D image.
Shape-Tailored Features and their Application to Texture Segmentation

KAUST Repository

Khan, Naeemullah

2014-01-01

Texture Segmentation is one of the most challenging areas of computer vision. One reason for this difficulty is the huge variety and variability of textures occurring in real world, making it very difficult to quantitatively study textures. One
Evaluation of texture differences among varieties of cooked quinoa

Science.gov (United States)

Texture is one of the most significant factors for consumers’ experience of foods. Texture difference of cooked quinoa among thirteen different varieties was studied. Correlations between the texture and seed composition, seed characteristics, cooking qualities, flour pasting properties and flour th...
On the origin of recrystallization textures

Indian Academy of Sciences (India)

Unknown

rival theories of evolution of recrystallization textures i.e. oriented nucleation (ON) and oriented growth (OG) has been under dispute. In the ON model, it has been argued that a higher frequency of the special orientation. (grains) than random occur, thus accounting for the texture. In the OG model, it has been argued that the.
How the deposition of cellulose microfibrils builds cell wall architecture

NARCIS (Netherlands)

Emons, A.M.C.; Mulder, B.M.

2000-01-01

Cell walls, the extracytoplasmic matrices of plant cells, consist of an ordered array of cellulose microfibrils embedded in a matrix of polysaccharides and glycoproteins. This construction is reminiscent of steel rods in reinforced concrete. How a cell organizes these ordered textures around itself,
Control of crystallographic texture and surface morphology of Pt/Tio2 templates for enhanced PZT thin film texture.

Science.gov (United States)

Fox, Austin J; Drawl, Bill; Fox, Glen R; Gibbons, Brady J; Trolier-McKinstry, Susan

2015-01-01

Optimized processing conditions for Pt/TiO2/SiO2/Si templating electrodes were investigated. These electrodes are used to obtain [111] textured thin film lead zirconate titanate (Pb[ZrxTi1-x ]O3 0 ≤ x ≤ 1) (PZT). Titanium deposited by dc magnetron sputtering yields [0001] texture on a thermally oxidized Si wafer. It was found that by optimizing deposition time, pressure, power, and the chamber pre-conditioning, the Ti texture could be maximized while maintaining low surface roughness. When oxidized, titanium yields [100]-oriented rutile. This seed layer has as low as a 4.6% lattice mismatch with [111] Pt; thus, it is possible to achieve strongly oriented [111] Pt. The quality of the orientation and surface roughness of the TiO2 and the Ti directly affect the achievable Pt texture and surface morphology. A transition between optimal crystallographic texture and the smoothest templating surface occurs at approximately 30 nm of original Ti thickness (45 nm TiO2). This corresponds to 0.5 nm (2 nm for TiO2) rms roughness as determined by atomic force microscopy and a full-width at half-maximum (FWHM) of the rocking curve 0002 (200) peak of 5.5/spl degrees/ (3.1/spl degrees/ for TiO2). A Pb[Zr0.52Ti 0.48]O3 layer was deposited and shown to template from the textured Pt electrode, with a maximum [111] Lotgering factor of 87% and a minimum 111 FWHM of 2.4/spl degrees/ at approximately 30 nm of original Ti.
Texture and deformation mechanism of yttrium

International Nuclear Information System (INIS)

Adamesku, R.A.; Grebenkin, S.V.; Stepanenko, A.V.

1992-01-01

X-ray pole figure analysis was applied to study texture and deformation mechanism in pure and commercial polycrystalline yttrium on cold working. It was found that in cast yttrium the texture manifected itself weakly enough both for pure and commercial metal. Analysis of the data obtained made it possible to assert that cold deformation of pure yttrium in the initial stage occurred mainly by slip the role of which decreased at strains higher than 36%. The texture of heavily deformed commercial yttrium contained two components, these were an 'ideal' basic orientation and an axial one with the angle of inclination about 20 deg. Twinning mechanism was revealed to be also possible in commercial yttrium
Fast Image Texture Classification Using Decision Trees

Science.gov (United States)

Thompson, David R.

2011-01-01

Texture analysis would permit improved autonomous, onboard science data interpretation for adaptive navigation, sampling, and downlink decisions. These analyses would assist with terrain analysis and instrument placement in both macroscopic and microscopic image data products. Unfortunately, most state-of-the-art texture analysis demands computationally expensive convolutions of filters involving many floating-point operations. This makes them infeasible for radiation- hardened computers and spaceflight hardware. A new method approximates traditional texture classification of each image pixel with a fast decision-tree classifier. The classifier uses image features derived from simple filtering operations involving integer arithmetic. The texture analysis method is therefore amenable to implementation on FPGA (field-programmable gate array) hardware. Image features based on the "integral image" transform produce descriptive and efficient texture descriptors. Training the decision tree on a set of training data yields a classification scheme that produces reasonable approximations of optimal "texton" analysis at a fraction of the computational cost. A decision-tree learning algorithm employing the traditional k-means criterion of inter-cluster variance is used to learn tree structure from training data. The result is an efficient and accurate summary of surface morphology in images. This work is an evolutionary advance that unites several previous algorithms (k-means clustering, integral images, decision trees) and applies them to a new problem domain (morphology analysis for autonomous science during remote exploration). Advantages include order-of-magnitude improvements in runtime, feasibility for FPGA hardware, and significant improvements in texture classification accuracy.
Fiber vs Rolling Texture: Stress State Dependence for Cold-Drawn Wire

Science.gov (United States)

Zorina, M. A.; Karabanalov, M. S.; Stepanov, S. I.; Demakov, S. L.; Loginov, Yu. N.; Lobanov, M. L.

2018-02-01

The texture of the cold-drawn copper wire was investigated along the radius using electron backscatter diffraction. The complex fiber texture of the central region of the wire was considered as the rolling texture consisting of a set of preferred orientations. The texture of the periphery region was revealed to be similar to the shear texture. The orientation-dependent properties of the wire were proven to be determined by the texture of the near-surface layers.
Evolution of solidification texture during additive manufacturing

Science.gov (United States)

Wei, H. L.; Mazumder, J.; DebRoy, T.

2015-01-01

Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six preferred growth directions in face centered cubic alloys. Therefore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components. PMID:26553246
76 FR 30542 - Adult Signature Services

Science.gov (United States)

2011-05-26

... POSTAL SERVICE 39 CFR Part 111 Adult Signature Services AGENCY: Postal Service\\TM\\. ACTION: Final..., Domestic Mail Manual (DMM[supreg]) 503.8, to add a new extra service called Adult Signature. This new service has two available options: Adult Signature Required and Adult Signature Restricted Delivery. DATES...
A Fourier-based textural feature extraction procedure

Science.gov (United States)

Stromberg, W. D.; Farr, T. G.

1986-01-01

A procedure is presented to discriminate and characterize regions of uniform image texture. The procedure utilizes textural features consisting of pixel-by-pixel estimates of the relative emphases of annular regions of the Fourier transform. The utility and derivation of the features are described through presentation of a theoretical justification of the concept followed by a heuristic extension to a real environment. Two examples are provided that validate the technique on synthetic images and demonstrate its applicability to the discrimination of geologic texture in a radar image of a tropical vegetated area.
On Texture and Geometry in Image Analysis

DEFF Research Database (Denmark)

Gustafsson, David Karl John

2009-01-01

fields and Maximum Entropy (FRAME) model [213, 214] is used for inpaining texture. We argue that many ’textures’ contain details that must be inpainted exactly. Simultaneous reconstruction of geometric structure and texture is a difficult problem, therefore, a two-phase reconstruction procedure...... is proposed. An inverse temperature is added to the FRAME model. In the first phase, the geometric structure is reconstructed by cooling the distribution, and in the second phase, the texture is added by heating the distribution. Empirically, we show that the long range geometric structure is inpainted...
Texture Control During the Manufacturing of Nonoriented Electrical Steels

NARCIS (Netherlands)

Kestens, L.; Jacobs, S.

2008-01-01

Methods of modern quantitative texture analysis are applied in order to characterize the crystallographic texture of various non-oriented electrical steel grades in view of their relation with the magnetic properties of the steel sheet. A texture parameter is defined which quantifies the density of
Experimental and Numerical Investigation on Tribological Performance of Grooved Texture

Directory of Open Access Journals (Sweden)

CHEN Ping

2016-06-01

Full Text Available In order to study the influence of the angle and arrangement forms of micro-grooves on the tribological performance of the contact surface, the finite element analysis software was used to simulate the grooved textures with different angles and arrangements. The YLP-20 laser processing system was used to process grooved texture on stainless steel disk surfaces, and the Tribometer (UMT-2 was also used to conduct tribological test under the condition of rotation. The results show that the numerical simulation values are basically consistent with experimental results of grooved textures, and the tribological performance of the friction pairs with textures is also improved. The grooved textures with different angles and arrangement forms have different influence on tribological performance of friction pairs. When the friction velocity is less than 300r/min, the parallel texture with 0° has smaller friction coefficients. While the friction velocity is larger than 300r/min, the parallel texture with 90° has a better ability of reducing friction. Therefore, different grooved textures should be chosen according to operation conditions.
TEXTURE OF COOKED SPELT WHEAT NOODLES

Directory of Open Access Journals (Sweden)

Magdaléna Lacko - Bartošová

2013-02-01

Full Text Available At present, there are limited and incomplete data on the ability of spelt to produce alimentary pasta of suitable quality. Noodles are traditional cereal-based food that is becoming increasingly popular worldwide because of its convenience, nutritional qualities, and palatability. It is generally accepted that texture is the main criterion for assessing overall quality of cooked noodles. We present selected indicators of noodle texture of three spelt cultivars – Oberkulmer Rotkorn, Rubiota and Franckenkorn grown in an ecological system at the locality of Dolna Malanta near Nitra. A texture analyzer TA.XT PLUS was used to determine cooked spelt wheat noodle firmness (N (AACC 66-50. The texture of cooked spelt wheat noodles was expressed also as elasticity (N and extensibility (mm. Statistical analysis showed significant influence of the variety and year of growing on the firmness, elasticity and extensibility of cooked noodles. The wholemeal spelt wheat noodles were characterized with lower cutting firmness than the flour noodles. Flour noodles were more tensile than wholemeal noodles. The best elasticity and extensibility of flour noodles was found in noodles prepared from Rubiota however from wholemeal noodles it was Oberkulmer Rotkorn. Spelt wheat is suitable for noodle production, however also here it is necessary to differentiate between varieties. According to achieved results, wholemeal noodles prepared from Oberkulmer Rotkorn can be recommended for noodle industry due to their consistent structure and better texture quality after cooking.
Texture analysis using Gabor wavelets

Science.gov (United States)

Naghdy, Golshah A.; Wang, Jian; Ogunbona, Philip O.

1996-04-01

Receptive field profiles of simple cells in the visual cortex have been shown to resemble even- symmetric or odd-symmetric Gabor filters. Computational models employed in the analysis of textures have been motivated by two-dimensional Gabor functions arranged in a multi-channel architecture. More recently wavelets have emerged as a powerful tool for non-stationary signal analysis capable of encoding scale-space information efficiently. A multi-resolution implementation in the form of a dyadic decomposition of the signal of interest has been popularized by many researchers. In this paper, Gabor wavelet configured in a 'rosette' fashion is used as a multi-channel filter-bank feature extractor for texture classification. The 'rosette' spans 360 degrees of orientation and covers frequencies from dc. In the proposed algorithm, the texture images are decomposed by the Gabor wavelet configuration and the feature vectors corresponding to the mean of the outputs of the multi-channel filters extracted. A minimum distance classifier is used in the classification procedure. As a comparison the Gabor filter has been used to classify the same texture images from the Brodatz album and the results indicate the superior discriminatory characteristics of the Gabor wavelet. With the test images used it can be concluded that the Gabor wavelet model is a better approximation of the cortical cell receptive field profiles.
Highly textured KNN-based piezoelectric ceramics by conventional sintering

International Nuclear Information System (INIS)

Zapata, Angelica Maria Mazuera; Silva Junior, Paulo Sergio da; Zambrano, Michel Venet

2016-01-01

Full text: Texturing in ferroelectric ceramics has played an important role in the enhancement of their piezoelectric properties. Common methods for ceramic texturing are hot pressing and template grain ground; nevertheless, the needed facilities to apply hot pressing and the processing of single crystal make the texture of ceramics expensive and very difficult. In this study, a novel method was investigated to obtain highly textured lead-free ceramics. A (K 0.5 Na 0.5 ) 0.97 Li 0. 0 3 Nb 0.8 Ta 0. 2 matrix (KNLNT), with CuO excess was sintered between 1070 and 1110 °C following a solid state reaction procedure. The CuO excess promotes liquid phase formation and a partial melting of the material. XRD patterns showed the intensity of (100) family peaks became much stronger with the increasing of sintering temperature and CuO. In addition, Lotgering factor was calculated and exhibited a texture degree between 40 % and 70 % for sintered samples having 13 and 16 wt. % CuO, respectively. These, highly textured ceramics, with adequate cut, can be used as substitutes single crystals for texturing of KNN-based lead-free ceramics. (author)
Influence of grain size and texture prior to warm rolling on microstructure, texture and magnetic properties of Fe-6.5 wt% Si steel

Science.gov (United States)

Xu, H. J.; Xu, Y. B.; Jiao, H. T.; Cheng, S. F.; Misra, R. D. K.; Li, J. P.

2018-05-01

Fe-6.5 wt% Si steel hot bands with different initial grain size and texture were obtained through different annealing treatment. These bands were then warm rolled and annealed. An analysis on the evolution of microstructure and texture, particularly the formation of recrystallization texture was studied. The results indicated that initial grain size and texture had a significant effect on texture evolution and magnetic properties. Large initial grains led to coarse deformed grains with dense and long shear bands after warm rolling. Such long shear bands resulted in growth advantage for {1 1 3} 〈3 6 1〉 oriented grains during recrystallization. On the other hand, sharp {11 h} 〈1, 2, 1/h〉 (α∗-fiber) texture in the coarse-grained sample led to dominant {1 1 2} 〈1 1 0〉 texture after warm rolling. Such {1 1 2} 〈1 1 0〉 deformed grains provided massive nucleation sites for {1 1 3} 〈3 6 1〉 oriented grains during subsequent recrystallization. These {1 1 3} 〈3 6 1〉 grains were confirmed to exhibit an advantage on grain growth compared to γ-fiber grains. As a result, significant {1 1 3} 〈3 6 1〉 texture was developed and unfavorable γ-fiber texture was inhibited in the final annealed sheet. Both these aspects led to superior magnetic properties in the sample with largest initial grain size. The magnetic induction B8 was 1.36 T and the high frequency core loss P10/400 was 17.07 W/kg.
Day of mourning and time of reminiscence: Death, funeral and reminiscence of political famous persons in Serbia in socialist era and afterwards

Directory of Open Access Journals (Sweden)

Pavićević Aleksandra

2009-01-01

Full Text Available The most impressive event of death in the Yugoslav region in the last 50 years was definitely associated with death and funeral of Josip Broz Tito, in May 1980. The departure of one of the last European pharaohs has marked the beginning of an end of an era, with still hard to measure ideological and political consequences. In a symbolic sense, the departure represented a final breakdown of the proclaimed rational and secular walls of communist ideology, whose foundations contained complex religious symbolic and rhetoric. Tito came to be remembered while he was still alive. He was the only living hero portrayed in monuments, whose name was displayed in street appellations and public institutions. Media concept of his death and funeral represented a confirmation and continuation of this reminiscence; in addition, the deeper meaning of this reminiscence revealed an essential negation of the fact that the mighty ruler is actually dead. Tito's position of a supreme deity, acquired during his lifetime, was even more firmly established by his death. In this way, it could be argued that death has contributed to Broz' deification, thus extending his cult furthermore. The question remains whether the faith in his divine soul would persevere the temptations of history if he had lived for a few years more? It appears that the same question could be posed in regards to the deification of assassinated prime minister, Dr Zoran Djindjic, whose death, funeral and post mortem glory represent almost the only comparable event from the recent Serbian history, to those of the complex death related rhetoric of Broz? The post mortem image of Dr Djindjic was created based on Christian model of martyr and sufferer, but also on the model of exemplar death, that is, heroic and martyr's death in the name of nation, an important element of a special religious system, i.e., religion of nation. In 2006, during the annual commemoration dedicated to Zoran Djindjic, media

REMINISCENCES, QUOTATIONS AND MOTIFS OF THE PSALTER IN THE WORKS OF I. A. BUNIN

Directory of Open Access Journals (Sweden)

Olga Anatolyevna Berdnikova

2012-11-01

Full Text Available The article examines the reminiscences, quotations and motifs borrowed from the Book of Psalms by I.A. Bunin in his poetry and prose. Discovering such reminiscences and quotations helps to clarify some debatable issues of the writer's personal position and outlook. The Book of Psalms acts as a major text of precedence in Bunin's works. Some of his poems are poetic variations of psalms (The Psalter, 1916; To Russia, 1922. Day and night as dominant images of Bunin's poetry are viewed as constants of being due to their creation by God. Night as an especially important and most frequent image in the whole heritage of I.A. Bunin becomes for him the time of self-knowledge and discovery of God, which is quite consistent with the poetic world of the Psalmist. In Bunin's prose, reading from the Book of Psalms often appears after a character dies. Death is thus viewed as a solemn and majestic event, and eternity becomes the main motif of such stories as The Pine Trees (1901, The Exodus (1918, Transfiguration (1923. It is from the psalmodic tradition that the title of one of Bunin's most conceptually important stories comes – Many waters (1911-1926. In this story, the author views the eternal through the lens of revolutionary perturbations in the 1917 Russia. The whole host of symbols associated in the Book of Psalms with 'many waters' finds a new life in Bunin's story. The author shows facing God as a profoundly Christian feeling. His protagonist feels not only fear, but primarily “the love and joy of being”. Cosmological, historical and providential 'plots' and images borrowed from the psalms prove that the Orthodox tradition was very important for Bunin's creative consciousness.
Non-Hodgkin lymphoma response evaluation with MRI texture classification

Directory of Open Access Journals (Sweden)

Heinonen Tomi T

2009-06-01

Full Text Available Abstract Background To show magnetic resonance imaging (MRI texture appearance change in non-Hodgkin lymphoma (NHL during treatment with response controlled by quantitative volume analysis. Methods A total of 19 patients having NHL with an evaluable lymphoma lesion were scanned at three imaging timepoints with 1.5T device during clinical treatment evaluation. Texture characteristics of images were analyzed and classified with MaZda application and statistical tests. Results NHL tissue MRI texture imaged before treatment and under chemotherapy was classified within several subgroups, showing best discrimination with 96% correct classification in non-linear discriminant analysis of T2-weighted images. Texture parameters of MRI data were successfully tested with statistical tests to assess the impact of the separability of the parameters in evaluating chemotherapy response in lymphoma tissue. Conclusion Texture characteristics of MRI data were classified successfully; this proved texture analysis to be potential quantitative means of representing lymphoma tissue changes during chemotherapy response monitoring.
Lesson 6: Signature Validation

Science.gov (United States)

Checklist items 13 through 17 are grouped under the Signature Validation Process, and represent CROMERR requirements that the system must satisfy as part of ensuring that electronic signatures it receives are valid.
21 CFR 11.50 - Signature manifestations.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Signature manifestations. 11.50 Section 11.50 Food... RECORDS; ELECTRONIC SIGNATURES Electronic Records § 11.50 Signature manifestations. (a) Signed electronic...: (1) The printed name of the signer; (2) The date and time when the signature was executed; and (3...
Texture of altered layers issued from glass corrosion

International Nuclear Information System (INIS)

Phalippou, J.; Woignier, Th.; Ayral, A.

1997-01-01

The layers which develop at the glass surface subjected to water corrosion depend on a collection of interacting parameters. Such a material can be studied using techniques which have been previously demonstrated as suitable for gels. A detailed description of the behaviour of gels under measurements is given. Investigations show that to really know the texture both mechanical properties and permeability must be known. Different experiments are reported. They give a rough estimate of the altered layer texture. Results coming from different techniques are compared and in a few cases are used to estimate additional textural information. Finally we put an insight into the nature and consequently to the texture evolution of the layer as the corrosion proceeds. (authors)
Texture of semi-solids : sensory flavor-texture interactions for custard desserts

NARCIS (Netherlands)

Wijk, de R.A.; Rasing, F.; Wilkinson, C.L.

2003-01-01

Possible interactions between flavor and oral texture sensations were investigated for four flavorants, diacetyl, benzaldehyde, vanillin, and caffeine, added in two concentrations to model vanilla custard desserts. The flavorants affected viscosities and resulted in corresponding changes in
21 CFR 11.70 - Signature/record linking.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Signature/record linking. 11.70 Section 11.70 Food... RECORDS; ELECTRONIC SIGNATURES Electronic Records § 11.70 Signature/record linking. Electronic signatures and handwritten signatures executed to electronic records shall be linked to their respective...
Expressiveness considerations of XML signatures

DEFF Research Database (Denmark)

Jensen, Meiko; Meyer, Christopher

2011-01-01

XML Signatures are used to protect XML-based Web Service communication against a broad range of attacks related to man-in-the-middle scenarios. However, due to the complexity of the Web Services specification landscape, the task of applying XML Signatures in a robust and reliable manner becomes...... more and more challenging. In this paper, we investigate this issue, describing how an attacker can still interfere with Web Services communication even in the presence of XML Signatures. Additionally, we discuss the interrelation of XML Signatures and XML Encryption, focussing on their security...
Digital Signature Schemes with Complementary Functionality and Applications

OpenAIRE

S. N. Kyazhin

2012-01-01

Digital signature schemes with additional functionality (an undeniable signature, a signature of the designated confirmee, a signature blind, a group signature, a signature of the additional protection) and examples of their application are considered. These schemes are more practical, effective and useful than schemes of ordinary digital signature.
17 CFR 12.12 - Signature.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Signature. 12.12 Section 12.12... General Information and Preliminary Consideration of Pleadings § 12.12 Signature. (a) By whom. All... document on behalf of another person. (b) Effect. The signature on any document of any person acting either...
High-speed high-security signatures

NARCIS (Netherlands)

Bernstein, D.J.; Duif, N.; Lange, T.; Schwabe, P.; Yang, B.Y.

2011-01-01

This paper shows that a $390 mass-market quad-core 2.4GHz Intel Westmere (Xeon E5620) CPU can create 108000 signatures per second and verify 71000 signatures per second on an elliptic curve at a 2128 security level. Public keys are 32 bytes, and signatures are 64 bytes. These performance figures
Multi Texture Analysis of Colorectal Cancer Continuum Using Multispectral Imagery.

Directory of Open Access Journals (Sweden)

Ahmad Chaddad

Full Text Available This paper proposes to characterize the continuum of colorectal cancer (CRC using multiple texture features extracted from multispectral optical microscopy images. Three types of pathological tissues (PT are considered: benign hyperplasia, intraepithelial neoplasia and carcinoma.In the proposed approach, the region of interest containing PT is first extracted from multispectral images using active contour segmentation. This region is then encoded using texture features based on the Laplacian-of-Gaussian (LoG filter, discrete wavelets (DW and gray level co-occurrence matrices (GLCM. To assess the significance of textural differences between PT types, a statistical analysis based on the Kruskal-Wallis test is performed. The usefulness of texture features is then evaluated quantitatively in terms of their ability to predict PT types using various classifier models.Preliminary results show significant texture differences between PT types, for all texture features (p-value < 0.01. Individually, GLCM texture features outperform LoG and DW features in terms of PT type prediction. However, a higher performance can be achieved by combining all texture features, resulting in a mean classification accuracy of 98.92%, sensitivity of 98.12%, and specificity of 99.67%.These results demonstrate the efficiency and effectiveness of combining multiple texture features for characterizing the continuum of CRC and discriminating between pathological tissues in multispectral images.
The Group Reminiscence Approach Can Increase Self-Awareness of Memory Deficits and Evoke a Life Review in People With Mild Cognitive Impairment: The Kurihara Project Data.

Science.gov (United States)

Nakamura, Kei; Kasai, Mari; Nakai, Megumi; Nakatsuka, Masahiro; Meguro, Kenichi

2016-06-01

The group reminiscence approach (GRA) and reality orientation (RO) are common psychosocial interventions for patients with dementia. As a qualitative evaluation of the reminiscence approach in patients with dementia, the Patient Report Outcome (PRO) is useful. The purpose of this study was to investigate the effects of GRA-RO for participants with mild cognitive impairment (MCI) using the PRO. A cluster randomized controlled trial. Community-based study. Ninety-four patients with MCI (39 GRA-RO, 23 physical activity, and 32 cognitive training) described their impressions. Based on the database of the Kurihara Project, we retrospectively analyzed the participants' descriptions of their impressions as a PRO in the nonpharmacological interventions: GRA-RO, physical activity, and cognitive training. We categorized the descriptions according to the following 2 types: impression with content and reminiscence with life review. We assessed what they wrote regarding memory loss. The content on their life reviews was also a particular focus for the GRA-RO group. PRO. Compared with the physical activity and the clinical training groups, the GRA-RO patients described their reminiscence with life review and their own memory problems. There was no confusion of the order of events of their autobiographical memories. There was a significant time effect between the 2 family involvement groups in quality-of-life (QOL) scores, and the postintervention QOL scores were significantly better than preintervention. This study suggests that the GRA-RO in participants with MCI not only stimulates life review but also increases self-awareness of memory deficits without confusion of the order of events. Thus, the GRA-RO may improve self-esteem and develop self-awareness. Copyright © 2016 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.
Quantitative analysis of textures produced in a hot-extruded zirconium plate; Analyse quantitative des textures developpees dans une plaque de zirconium filee a chaud

Energy Technology Data Exchange (ETDEWEB)

Couterne, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires. Institut national des sciences et techniques nucleaires, laboratoire de metallurgie

1967-01-01

The textures produced in zirconium by the extrusion at 730 deg C of a cylindrical billet in the form of a plate having a rectangular cross-section, have been studied by the Schulz method using an isotropic standard. These textures have been determined both parallel to the plane of the plate and parallel to the plane of the sides, All the results are analyzed in a final discussion which makes it possible to show, in particular near the edges of the plate, that certain components of the textures observed in the two series of recordings are in fact aspects of the same texture seen from two different angles, It is shown furthermore that the zirconium thus shaped has cold-work textures and als recrystallisation textures formed after the preceding cold-working, If the observed textures are considered schematically, it can be see that two of these have already been described in the literature and are similar to those found in rolled products: these textures are such that the (0001) planes are inclined at 36 deg C and 60 deg C respectively with respect to a plan tangential to the curve (envelope of transverse flow rates) resulting from the extrusion geometry under consideration; the third texture is defined. by the fact that the (0001) plane is orthogonal to the exterior surfaces of the plate. The direction of extrusion associated with these planes and common to the three textures is of the type <1010>, Dilatometric tests have been carried out on samples taken both parallel and perpendicular to the extrusion direction, These tests show that the zirconium is dilatometrically anisotropic and that a plot of ({alpha}{sub v})-a against temperature shows a change of gradient at 400 deg C, this latter effect may be due to the change in the electronic configuration of the metal occurring at this temperature. (author) [French] Les textures conferees au zirconium par filage a chaud a 730 deg C d'une billette cylindrique sous forme d'une plaque de section rectangulaire, ont
Quantitative analysis of textures produced in a hot-extruded zirconium plate; Analyse quantitative des textures developpees dans une plaque de zirconium filee a chaud

Energy Technology Data Exchange (ETDEWEB)

Couterne, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires. Institut national des sciences et techniques nucleaires, laboratoire de metallurgie

1967-01-01

The textures produced in zirconium by the extrusion at 730 deg C of a cylindrical billet in the form of a plate having a rectangular cross-section, have been studied by the Schulz method using an isotropic standard. These textures have been determined both parallel to the plane of the plate and parallel to the plane of the sides, All the results are analyzed in a final discussion which makes it possible to show, in particular near the edges of the plate, that certain components of the textures observed in the two series of recordings are in fact aspects of the same texture seen from two different angles, It is shown furthermore that the zirconium thus shaped has cold-work textures and als recrystallisation textures formed after the preceding cold-working, If the observed textures are considered schematically, it can be see that two of these have already been described in the literature and are similar to those found in rolled products: these textures are such that the (0001) planes are inclined at 36 deg C and 60 deg C respectively with respect to a plan tangential to the curve (envelope of transverse flow rates) resulting from the extrusion geometry under consideration; the third texture is defined. by the fact that the (0001) plane is orthogonal to the exterior surfaces of the plate. The direction of extrusion associated with these planes and common to the three textures is of the type <1010>, Dilatometric tests have been carried out on samples taken both parallel and perpendicular to the extrusion direction, These tests show that the zirconium is dilatometrically anisotropic and that a plot of ({alpha}{sub v})-a against temperature shows a change of gradient at 400 deg C, this latter effect may be due to the change in the electronic configuration of the metal occurring at this temperature. (author) [French] Les textures conferees au zirconium par filage a chaud a 730 deg C d'une billette cylindrique sous forme d'une plaque de section rectangulaire, ont ete
Mechanical properties of ion-beam-textured surgical implant alloys

Science.gov (United States)

Weigand, A. J.

1977-01-01

An electron-bombardment Hg ion thruster was used as an ion source to texture surfaces of materials used to make orthopedic and/or dental prostheses or implants. The materials textured include 316 stainless steel, titanium-6% aluminum, 4% vanadium, and cobalt-20% chromium, 15% tungsten. To determine the effect of ion texturing on the ultimate strength and yield strength, stainless steel and Co-Cr-W alloy samples were tensile tested to failure. Three types of samples of both materials were tested. One type was ion-textured (the process also heats each sample to 300 C), another type was simply heated to 300 C in an oven, and the third type was untreated. Stress-strain diagrams, 0.2% offset yield strength data, total elongation data, and area reduction data are presented. Fatigue specimens of ion textured and untextured 316 stainless steel and Ti-6% Al-4% V were tested. Included as an ion textured sample is a Ti-6% Al-4% V sample which was ion machined by means of Ni screen mask so as to produce an array of 140 mu m x 140 mu m x 60 mu m deep pits. Scanning electron microscopy was used to characterize the ion textured surfaces.
Temperature dependence of piezoelectric properties for textured SBN ceramics.

Science.gov (United States)

Kimura, Masahiko; Ogawa, Hirozumi; Kuroda, Daisuke; Sawada, Takuya; Higuchi, Yukio; Takagi, Hiroshi; Sakabe, Yukio

2007-12-01

Temperature dependences of piezoelectric properties were studied for h001i textured ceramics of bismuth layer-structured ferroelectrics, SrBi(2)Nb(2)O(9) (SBN). The textured ceramics with varied orientation degrees were fabricated by templated, grain-growth method, and the temperature dependences of resonance frequency were estimated. Excellent temperature stability of resonance frequency was obtained for the 76% textured ceramics. The resonance frequency of the 76% textured specimens varied almost linearly over a wide temperature range. Therefore, the variation was slight, even in a high temperature region above 150 degrees C. Temperature stability of a quartz crystal oscillator is generally higher than that of a ceramic resonator around room temperature. The variation of resonance frequency for the 76% textured SrBi(2)Nb(2)O(9) was larger than that of oscillation frequency for a typical quartz oscillator below 150 degrees C also in this study. However, the variation of the textured SrBi(2)Nb(2)O(9) was smaller than that of the quartz oscillator over a wide temperature range from -50 to 250 degrees C. Therefore, textured SrBi(2)Nb(2)O(9) ceramics is a major candidate material for the resonators used within a wide temperature range.
TU-D-207B-03: Early Assessment of Response to Chemoradiotherapy Based On Textural Analysis of Pre and Mid-Treatment FDG-PET Image in Locally Advanced Head and Neck Cancer

Energy Technology Data Exchange (ETDEWEB)

Cui, Y; Pollom, E; Loo, B; Le, Q; Hara, W; Li, R [Stanford University, Palo Alto, CA (United States)

2016-06-15

Purpose: To evaluate whether tumor textural features extracted from both pre- and mid-treatment FDG-PET images predict early response to chemoradiotherapy in locally advanced head and neck cancer, and investigate whether they provide complementary value to conventional volume-based measurements. Methods: Ninety-four patients with locally advanced head and neck cancers were retrospectively studied. All patients received definitive chemoradiotherapy and underwent FDG-PET planning scans both before and during treatment. Within the primary tumor we extracted 6 textural features based on gray-level co-occurrence matrices (GLCM): entropy, dissimilarity, contrast, correlation, energy, and homogeneity. These image features were evaluated for their predictive power of treatment response to chemoradiotherapy in terms of local recurrence free survival (LRFS) and progression free survival (PFS). Logrank test were used to assess the statistical significance of the stratification between low- and high-risk groups. P-values were adjusted for multiple comparisons by the false discovery rate (FDR) method. Results: All six textural features extracted from pre-treatment PET images significantly differentiated low- and high-risk patient groups for LRFS (P=0.011–0.038) and PFS (P=0.029–0.034). On the other hand, none of the textural features on mid-treatment PET images was statistically significant in stratifying LRFS (P=0.212–0.445) or PFS (P=0.168–0.299). An imaging signature that combines textural feature (GLCM homogeneity) and metabolic tumor volume showed an improved performance for predicting LRFS (hazard ratio: 22.8, P<0.0001) and PFS (hazard ratio: 13.9, P=0.0005) in leave-one-out cross validation. Intra-tumor heterogeneity measured by textural features was significantly lower in mid-treatment PET images than in pre-treatment PET images (T-test: P<1.4e-6). Conclusion: Tumor textural features on pretreatment FDG-PET images are predictive for response to chemoradiotherapy
Cool Polar Bears: Dabbing on the Texture

Science.gov (United States)

O'Connell, Jean

2011-01-01

In this article, the author describes how her second-graders created their cool polar bears. The students used the elements of shape and texture to create the bears. They used Monet's technique of dabbing paint so as to give the bear some texture on his fur.
Fast color/texture segmentation for outdoor robots

DEFF Research Database (Denmark)

Blas, Morten Rufus; Agrawal, Motilal; Sundaresan, Aravind

2008-01-01

We present a fast integrated approach for online segmentation of images for outdoor robots. A compact color and texture descriptor has been developed to describe local color and texture variations in an image. This descriptor is then used in a two-stage fast clustering framework using K...

Texturized dairy proteins.

Science.gov (United States)

Onwulata, Charles I; Phillips, John G; Tunick, Michael H; Qi, Phoebi X; Cooke, Peter H

2010-03-01

Dairy proteins are amenable to structural modifications induced by high temperature, shear, and moisture; in particular, whey proteins can change conformation to new unfolded states. The change in protein state is a basis for creating new foods. The dairy products, nonfat dried milk (NDM), whey protein concentrate (WPC), and whey protein isolate (WPI) were modified using a twin-screw extruder at melt temperatures of 50, 75, and 100 degrees C, and moistures ranging from 20 to 70 wt%. Viscoelasticity and solubility measurements showed that extrusion temperature was a more significant (P extruded dairy protein ranged from rigid (2500 N) to soft (2.7 N). Extruding at or above 75 degrees C resulted in increased peak force for WPC (138 to 2500 N) and WPI (2.7 to 147.1 N). NDM was marginally texturized; the presence of lactose interfered with its texturization. WPI products extruded at 50 degrees C were not texturized; their solubility values ranged from 71.8% to 92.6%. A wide possibility exists for creating new foods with texturized dairy proteins due to the extensive range of states achievable. Dairy proteins can be used to boost the protein content in puffed snacks made from corn meal, but unmodified, they bind water and form doughy pastes with starch. To minimize the water binding property of dairy proteins, WPI, or WPC, or NDM were modified by extrusion processing. Extrusion temperature conditions were adjusted to 50, 75, or 100 degrees C, sufficient to change the structure of the dairy proteins, but not destroy them. Extrusion modified the structures of these dairy proteins for ease of use in starchy foods to boost nutrient levels. Dairy proteins can be used to boost the protein content in puffed snacks made from corn meal, but unmodified, they bind water and form doughy pastes with starch. To minimize the water binding property of dairy proteins, whey protein isolate, whey protein concentrate, or nonfat dried milk were modified by extrusion processing. Extrusion
Effectiveness of a structured education reminiscence-based programme for staff on the quality of life of residents with dementia in long-stay units: A study protocol for a cluster randomised trial

Directory of Open Access Journals (Sweden)

Jordan Fionnuala

2011-02-01

Full Text Available Abstract Background Current projections indicate that there will be a significant increase in the number of people with dementia in Ireland, from approximately 40,000 at present to 100,000 by 2036. Psychosocial interventions, such as reminiscence, have the potential to improve the quality of life of people with dementia. However, while reminiscence is used widely in dementia care, its impact on the quality of life of people with dementia remains largely undocumented and there is a need for a robust and fair assessment of its overall effectiveness. The DementiA education programme incorporating REminiscence for Staff study will evaluate the effectiveness of a structured reminiscence-based education programme for care staff on the quality of life of residents with dementia in long-stay units. Methods/Design The study is a two-group, single-blind cluster randomised trial conducted in public and private long-stay residential settings in Ireland. Randomisation to control and intervention is at the level of the long-stay residential unit. Sample size calculations suggest that 18 residential units each containing 17 people with dementia are required for randomisation to control and intervention groups to achieve power of at least 80% with alpha levels of 0.05. Each resident in the intervention group is linked with a nurse and care assistant who have taken the structured reminiscence-based education programme. Participants in the control group will receive usual care. The primary outcome is quality of life of residents as measured by the Quality of Life-AD instrument. Secondary outcomes include agitation, depression and carer burden. Blinded outcome assessment is undertaken at baseline and at 18-22 weeks post-randomisation. Discussion Trials on reminiscence-based interventions for people with dementia have been scarce and the quality of the information arising from those that have been done has been undermined by methodological problems, particularly in
The Heeger & Bergen Pyramid Based Texture Synthesis Algorithm

Directory of Open Access Journals (Sweden)

Thibaud Briand

2014-11-01

Full Text Available This contribution deals with the Heeger-Bergen pyramid-based texture analysis/synthesis algorithm. It brings a detailed explanation of the original algorithm tested on many characteristic examples. Our analysis reproduces the original results, but also brings a minor improvement concerning non-periodic textures. Inspired by visual perception theories, Heeger and Bergen proposed to characterize a texture by its first-order statistics of both its color and its responses to multiscale and multi-orientation filters, namely the steerable pyramid. The Heeger-Bergen algorithm consists in the following procedure: starting from a white noise image, histogram matchings are performed to the noise alternatively in both the image domain and steerable pyramid domain, so that the corresponding histograms match the ones of the input texture.
Cloud field classification based on textural features

Science.gov (United States)

Sengupta, Sailes Kumar

1989-01-01

An essential component in global climate research is accurate cloud cover and type determination. Of the two approaches to texture-based classification (statistical and textural), only the former is effective in the classification of natural scenes such as land, ocean, and atmosphere. In the statistical approach that was adopted, parameters characterizing the stochastic properties of the spatial distribution of grey levels in an image are estimated and then used as features for cloud classification. Two types of textural measures were used. One is based on the distribution of the grey level difference vector (GLDV), and the other on a set of textural features derived from the MaxMin cooccurrence matrix (MMCM). The GLDV method looks at the difference D of grey levels at pixels separated by a horizontal distance d and computes several statistics based on this distribution. These are then used as features in subsequent classification. The MaxMin tectural features on the other hand are based on the MMCM, a matrix whose (I,J)th entry give the relative frequency of occurrences of the grey level pair (I,J) that are consecutive and thresholded local extremes separated by a given pixel distance d. Textural measures are then computed based on this matrix in much the same manner as is done in texture computation using the grey level cooccurrence matrix. The database consists of 37 cloud field scenes from LANDSAT imagery using a near IR visible channel. The classification algorithm used is the well known Stepwise Discriminant Analysis. The overall accuracy was estimated by the percentage or correct classifications in each case. It turns out that both types of classifiers, at their best combination of features, and at any given spatial resolution give approximately the same classification accuracy. A neural network based classifier with a feed forward architecture and a back propagation training algorithm is used to increase the classification accuracy, using these two classes
The effects of extrinsic motivation on signature authorship opinions in forensic signature blind trials.

Science.gov (United States)

Dewhurst, Tahnee N; Found, Bryan; Ballantyne, Kaye N; Rogers, Doug

2014-03-01

Expertise studies in forensic handwriting examination involve comparisons of Forensic Handwriting Examiners' (FHEs) opinions with lay-persons on blind tests. All published studies of this type have reported real and demonstrable skill differences between the specialist and lay groups. However, critics have proposed that any difference shown may be indicative of a lack of motivation on the part of lay participants, rather than a real difference in skill. It has been suggested that qualified FHEs would be inherently more motivated to succeed in blinded validation trials, as their professional reputations could be at risk, should they perform poorly on the task provided. Furthermore, critics suggest that lay-persons would be unlikely to be highly motivated to succeed, as they would have no fear of negative consequences should they perform badly. In an effort to investigate this concern, a blind signature trial was designed and administered to forty lay-persons. Participants were required to compare known (exemplar) signatures of an individual to questioned signatures and asked to express an opinion regarding whether the writer of the known signatures wrote each of the questioned signatures. The questioned signatures comprised a mixture of genuine, disguised and simulated signatures. The forty participants were divided into two separate groupings. Group 'A' were requested to complete the trial as directed and were advised that for each correct answer they would be financially rewarded, for each incorrect answer they would be financially penalized, and for each inconclusive opinion they would receive neither penalty nor reward. Group 'B' was requested to complete the trial as directed, with no mention of financial recompense or penalty. The results of this study do not support the proposition that motivation rather than skill difference is the source of the statistical difference in opinions between individuals' results in blinded signature proficiency trials. Crown
HOW GOOD ARE FUTURE LAWYERS IN JUDGING THE ACCURACY OF REMINISCENT DETAILS? THE ESTIMATION-OBSERVATION GAP IN REAL EYEWITNESS ACCOUNTS

Directory of Open Access Journals (Sweden)

Aileen Oeberst

2015-07-01

Full Text Available Research has shown a discrepancy between estimated and actually observed accuracy of reminiscent details in eyewitness accounts. This estimation-observation gap is of particular relevance with regard to the evaluation of eyewitnesses’ accounts in the legal context. To date it has only been demonstrated in non-naturalistic settings, however. In addition, it is not known whether this gap extends to other tasks routinely employed in real-world trials, for instance person-identification tasks. In this study, law students witnessed a staged event and were asked to either recall the event and perform a person identification task or estimate the accuracy of the others’ performance. Additionally, external estimations were obtained from students who had not witnessed the event, but received a written summary instead. The estimation-observation gap was replicated for reminiscent details under naturalistic encoding conditions. This gap was more pronounced when compared to forgotten details, but not significantly so when compared to consistent details. In contrast, accuracy on the person-identification task was not consistently underestimated. The results are discussed in light of their implications for real-world trials and future research.
Threshold Signature Schemes Application

Directory of Open Access Journals (Sweden)

Anastasiya Victorovna Beresneva

2015-10-01

Full Text Available This work is devoted to an investigation of threshold signature schemes. The systematization of the threshold signature schemes was done, cryptographic constructions based on interpolation Lagrange polynomial, elliptic curves and bilinear pairings were examined. Different methods of generation and verification of threshold signatures were explored, the availability of practical usage of threshold schemes in mobile agents, Internet banking and e-currency was shown. The topics of further investigation were given and it could reduce a level of counterfeit electronic documents signed by a group of users.
Exotic signatures from supersymmetry

International Nuclear Information System (INIS)

Hall, L.J.

1989-08-01

Minor changes to the standard supersymmetric model, such as soft flavor violation and R parity violation, cause large changes in the signatures. The origin of these changes and the resulting signatures are discussed. 15 refs., 7 figs., 2 tabs
Texture collapse

International Nuclear Information System (INIS)

Prokopec, T.; Sornborger, A.; Brandenberger, R.H.

1992-01-01

We study single-texture collapse using a leapfrog discretization method on a 30x30x30 spatial lattice. We investigate the influence of boundary conditions, physical size of the lattice, type of space-time background (flat, i.e., nonexpanding, vs radiation-dominated and matter-dominated universes), and spatial distribution of the initial texture configuration on collapse time and critical winding. For a spherically symmetric initial configuration of size equal to the horizon size on a lattice containing 12 (30) horizon volumes, the critical winding is found to be 0.621±0.001 (0.602±0.003) (flat case), 0.624±0.002 (0.604±0.005) (radiation era), 0.628±0.002 (0.612±0.003) (matter era). The larger the physical size of the lattice (in units of the horizon size), the smaller is the critical winding, and in the limit of an infinite lattice, we argue that the critical winding approaches 0.5. For radially asymmetric cases, contraction of one axis ( /Ipancake case) slightly reduces collapse time and critical winding, and contraction of two axes (d/Icigar case) reduces collapse time and critical winding significantly
Research on a New Signature Scheme on Blockchain

Directory of Open Access Journals (Sweden)

Chao Yuan

2017-01-01

Full Text Available With the rise of Bitcoin, blockchain which is the core technology of Bitcoin has received increasing attention. Privacy preserving and performance on blockchain are two research points in academia and business, but there are still some unresolved issues in both respects. An aggregate signature scheme is a digital signature that supports making signatures on many different messages generated by many different users. Using aggregate signature, the size of the signature could be shortened by compressing multiple signatures into a single signature. In this paper, a new signature scheme for transactions on blockchain based on the aggregate signature was proposed. It was worth noting that elliptic curve discrete logarithm problem and bilinear maps played major roles in our signature scheme. And the security properties of our signature scheme were proved. In our signature scheme, the amount will be hidden especially in the transactions which contain multiple inputs and outputs. Additionally, the size of the signature on transaction is constant regardless of the number of inputs and outputs that the transaction contains, which can improve the performance of signature. Finally, we gave an application scenario for our signature scheme which aims to achieve the transactions of big data on blockchain.
Determination of textures by neutron diffraction

International Nuclear Information System (INIS)

Dervin, P.; Penelle, R.

1989-01-01

In virtue of the low absorption coefficient of most materials in regard to neutrons, neutron diffraction is particularly well adapted for high-precision characterizing of the gross texture of massive fine-grained or coarse-grained specimens of the order of the cubic centimeter. The firt part of this paper is devoted to a description of the distribution of crystalline orientations, and the second part to experimental identification of textures [fr
Texture and anisotropy in the bismuth sodium titanate system

Science.gov (United States)

Fancher, Christoher M.

Bi0.5Na0.5TiO3 has received interest as a potential replacement for lead containing ferroelectrics. However, the piezoelectric response of pure Bi0.5Na0.5TiO 3 does not compare to the strong piezoelectric response of lead based piezoelectrics. To increase the piezoelectric response, Bi0.5Na 0.5TiO3 has been alloyed with BaTiO3 and K 0.5Na0.5NbO3. Another route to enhance the response is to take advantage of the anisotropic properties by inducing a preferred crystallographic orientation. Both routes were used to investigate the effect a crystallographic texture has on the strain response of Bi0.5Na 0.5TiO3-based ceramics. A crystallographic texture was induced by templated grain growth of pure phase Bi0.5Na0.5TiO3 templates using the tape casting method to orient template particles relative to the tape cast normal. Sintered Bi0.5Na0.5TiO3-based materials developed a strong (00l)pc fiber texture relative to the tape cast normal, with no preferential alignment relative to the tape cast plane. Textured Bi0.5Na0.5TiO3-(5)BaTiO3 showed a piezoelectric response of 245 pC/N, a better than 50% enhancement from the 150 pC/N response of randomly oriented samples. The Bi0.5Na0.5TiO3-(5)BaTiO3-(2)K 0.5Na0.5NbO3 (x,y) system has been shown to undergo electric-field-induced phase transformation from a pseudocubic to polar phase. For (7,2) a strong 8.7 multiples of a random distribution (MRD) crystallographic texture increased the macroscopic strain response by 50%. Applying the electric field perpendicular to the fiber texture axis reduces the macroscopic strain response of textured (7,2) by 17%. The affect field direction has on the electric-field-induced phase transformations of textured (7,2) was investigated using in situ electric field dependent diffraction. In situ diffraction data showed the high strain response of textured (7,2) can be attributed to a reversible pseudocubic to tetragonal transformation. The field-induced tetragonal phase nucleates preferentially with a
Texture analysis of

NARCIS (Netherlands)

Lubsch, A.; Timmermans, K.

2017-01-01

Texture analysis is a method to test the physical properties of a material by tension and compression. The growing interest in commercialisation of seaweeds for human food has stimulated research into the physical properties of seaweed tissue. These are important parameters for the survival of
Quantum multi-signature protocol based on teleportation

International Nuclear Information System (INIS)

Wen Xiao-jun; Liu Yun; Sun Yu

2007-01-01

In this paper, a protocol which can be used in multi-user quantum signature is proposed. The scheme of signature and verification is based on the correlation of Greenberger-Horne-Zeilinger (GHZ) states and the controlled quantum teleportation. Different from the digital signatures, which are based on computational complexity, the proposed protocol has perfect security in the noiseless quantum channels. Compared to previous quantum signature schemes, this protocol can verify the signature independent of an arbitrator as well as realize multi-user signature together. (orig.)
Formation of biaxial texture in metal films by selective ion beam etching

Energy Technology Data Exchange (ETDEWEB)

Park, S.J. [Department of Materials Science and Engineering, University of Florida, 106 Rhines Hall, P.O. Box 116400, Gainesville, FL 32611 (United States); Norton, D.P. [Department of Materials Science and Engineering, University of Florida, 106 Rhines Hall, P.O. Box 116400, Gainesville, FL 32611 (United States)]. E-mail: dnort@mse.ufl.edu; Selvamanickam, Venkat [IGC-SuperPower, LLC, 450 Duane Avenue, Schenectady, NY 12304 (United States)

2006-05-15

The formation of in-plane texture via ion bombardment of uniaxially textured metal films was investigated. In particular, selective grain Ar ion beam etching of uniaxially textured (0 0 1) Ni was used to achieve in-plane aligned Ni grains. Unlike conventional ion beam assisted deposition, the ion beam irradiates the uniaxially textured film surface with no impinging deposition flux. The initial uniaxial texture is established via surface energy minimization with no ion irradiation. Within this sequential texturing method, in-plane grain alignment is driven by selective etching and grain overgrowth. Biaxial texture was achieved for ion beam irradiation at elevated temperature.
Formation of biaxial texture in metal films by selective ion beam etching

International Nuclear Information System (INIS)

Park, S.J.; Norton, D.P.; Selvamanickam, Venkat

2006-01-01

The formation of in-plane texture via ion bombardment of uniaxially textured metal films was investigated. In particular, selective grain Ar ion beam etching of uniaxially textured (0 0 1) Ni was used to achieve in-plane aligned Ni grains. Unlike conventional ion beam assisted deposition, the ion beam irradiates the uniaxially textured film surface with no impinging deposition flux. The initial uniaxial texture is established via surface energy minimization with no ion irradiation. Within this sequential texturing method, in-plane grain alignment is driven by selective etching and grain overgrowth. Biaxial texture was achieved for ion beam irradiation at elevated temperature
Minimizing inter-microscope variability in dental microwear texture analysis

Science.gov (United States)

Arman, Samuel D.; Ungar, Peter S.; Brown, Christopher A.; DeSantis, Larisa R. G.; Schmidt, Christopher; Prideaux, Gavin J.

2016-06-01

A common approach to dental microwear texture analysis (DMTA) uses confocal profilometry in concert with scale-sensitive fractal analysis to help understand the diets of extinct mammals. One of the main benefits of DMTA over other methods is the repeatable, objective manner of data collection. This repeatability, however, is threatened by variation in results of DMTA of the same dental surfaces yielded by different microscopes. Here we compare DMTA data of five species of kangaroos measured on seven profilers of varying specifications. Comparison between microscopes confirms that inter-microscope differences are present, but we show that deployment of a number of automated treatments to remove measurement noise can help minimize inter-microscope differences. Applying these same treatments to a published hominin DMTA dataset shows that they alter some significant differences between dietary groups. Minimising microscope variability while maintaining interspecific dietary differences requires then that these factors are balanced in determining appropriate treatments. The process outlined here offers a solution for allowing comparison of data between microscopes, which is essential for ongoing DMTA research. In addition, the process undertaken, including considerations of other elements of DMTA protocols also promises to streamline methodology, remove measurement noise and in doing so, optimize recovery of a reliable dietary signature.
TEXTURE ANALYSIS OF EXTRUDED APPLE POMACE - WHEAT SEMOLINA BLENDS

Directory of Open Access Journals (Sweden)

Ivan Bakalov

2016-03-01

Full Text Available Apple pomace - wheat semolina blends were extruded in a laboratory single screw extruder (Brabender 20 DN, Germany. Effects apple pomace content, moisture content, screw speed, and temperature of final cooking zone on texture of extrudates were studied applying response surface methodology. The texture characteristics of the extrudates were measured using a TA.XT Plus Texture Analyser, Stable Micro Systems.
A Directed Signature Scheme and its Applications

OpenAIRE

Lal, Sunder; Kumar, Manoj

2004-01-01

This paper presents a directed signature scheme with the property that the signature can be verified only with the help of signer or signature receiver. We also propose its applications to share verification of signatures and to threshold cryptosystems.
Determination of the origin and texture of marble artifacts using stable isotopes

Science.gov (United States)

Dotsika, E.; Poutoukis, D.; Zisi, N.; Psomiadis, D.

2009-04-01

For the characterization of marble and the identification of the origin of marble artifacts, samples from several ancient monuments of Greece were analyzed using several techniques: stable isotopes of carbonates (13C, 18O), XRD analysis and optical microscopy, from which information can be obtained on the origin and texture of the marble used for the production of the artifacts. The full range of grain sizes and isotopic signatures that occur in a lot of different quarries has been measured and presented. In a δ13C versus δ18O diagram, the fields corresponding to all known ancient quarries (from Penteli, Cyclades, especially Naxos (Mela, Apol, Apir, Senax), Keros, Paros (Parlak, Parlyc) and Asia Minor (Prokon)) are reported. The plots representing the analyzed samples are also shown on the same diagram. The final results of the study indicate the origin of the carbonate material of the artefacts from each of the ancient monument. In cases that the samples plot on overlapping areas, a further study is proposed, using the maximum grain size of the material.

Anisotropic 3D texture synthesis with application to volume rendering

DEFF Research Database (Denmark)

Laursen, Lasse Farnung; Ersbøll, Bjarne Kjær; Bærentzen, Jakob Andreas

2011-01-01

images using a 12.1 megapixel camera. Next, we extend the volume rendering pipeline by creating a transfer function which yields not only color and opacity from the input intensity, but also texture coordinates for our synthesized 3D texture. Thus, we add texture to the volume rendered images....... This method is applied to a high quality visualization of a pig carcass, where samples of meat, bone, and fat have been used to produce the anisotropic 3D textures....
On reliable discovery of molecular signatures

Directory of Open Access Journals (Sweden)

Björkegren Johan

2009-01-01

Full Text Available Abstract Background Molecular signatures are sets of genes, proteins, genetic variants or other variables that can be used as markers for a particular phenotype. Reliable signature discovery methods could yield valuable insight into cell biology and mechanisms of human disease. However, it is currently not clear how to control error rates such as the false discovery rate (FDR in signature discovery. Moreover, signatures for cancer gene expression have been shown to be unstable, that is, difficult to replicate in independent studies, casting doubts on their reliability. Results We demonstrate that with modern prediction methods, signatures that yield accurate predictions may still have a high FDR. Further, we show that even signatures with low FDR may fail to replicate in independent studies due to limited statistical power. Thus, neither stability nor predictive accuracy are relevant when FDR control is the primary goal. We therefore develop a general statistical hypothesis testing framework that for the first time provides FDR control for signature discovery. Our method is demonstrated to be correct in simulation studies. When applied to five cancer data sets, the method was able to discover molecular signatures with 5% FDR in three cases, while two data sets yielded no significant findings. Conclusion Our approach enables reliable discovery of molecular signatures from genome-wide data with current sample sizes. The statistical framework developed herein is potentially applicable to a wide range of prediction problems in bioinformatics.
Feature-based characterisation of signature topography in laser powder bed fusion of metals

Science.gov (United States)

Senin, Nicola; Thompson, Adam; Leach, Richard

2018-04-01

The use of state-of-the-art areal topography measurement instrumentation allows for a high level of detail in the acquisition of topographic information at micrometric scales. The 3D geometric models of surface topography obtained from measured data create new opportunities for the investigation of manufacturing processes through characterisation of the surfaces of manufactured parts. Conventional methods for quantitative assessment of topography usually only involve the computation of texture parameters, summary indicators of topography-related characteristics that are computed over the investigated area. However, further useful information may be obtained through characterisation of signature topographic formations, as more direct indicators of manufacturing process behaviour and performance. In this work, laser powder bed fusion of metals is considered. An original algorithmic method is proposed to isolate relevant topographic formations and to quantify their dimensional and geometric properties, using areal topography data acquired by state-of-the-art areal topography measurement instrumentation.
Clustering document fragments using background color and texture information

Science.gov (United States)

Chanda, Sukalpa; Franke, Katrin; Pal, Umapada

2012-01-01

Forensic analysis of questioned documents sometimes can be extensively data intensive. A forensic expert might need to analyze a heap of document fragments and in such cases to ensure reliability he/she should focus only on relevant evidences hidden in those document fragments. Relevant document retrieval needs finding of similar document fragments. One notion of obtaining such similar documents could be by using document fragment's physical characteristics like color, texture, etc. In this article we propose an automatic scheme to retrieve similar document fragments based on visual appearance of document paper and texture. Multispectral color characteristics using biologically inspired color differentiation techniques are implemented here. This is done by projecting document color characteristics to Lab color space. Gabor filter-based texture analysis is used to identify document texture. It is desired that document fragments from same source will have similar color and texture. For clustering similar document fragments of our test dataset we use a Self Organizing Map (SOM) of dimension 5×5, where the document color and texture information are used as features. We obtained an encouraging accuracy of 97.17% from 1063 test images.
Multifunctional imaging signature for V-KI-RAS2 Kirsten rat sarcoma viral oncogene homolog (KRAS) mutations in colorectal cancer.

Science.gov (United States)

Miles, Kenneth A; Ganeshan, Balaji; Rodriguez-Justo, Manuel; Goh, Vicky J; Ziauddin, Zia; Engledow, Alec; Meagher, Marie; Endozo, Raymondo; Taylor, Stuart A; Halligan, Stephen; Ell, Peter J; Groves, Ashley M

2014-03-01

This study explores the potential for multifunctional imaging to provide a signature for V-KI-RAS2 Kirsten rat sarcoma viral oncogene homolog (KRAS) gene mutations in colorectal cancer. This prospective study approved by the institutional review board comprised 33 patients undergoing PET/CT before surgery for proven primary colorectal cancer. Tumor tissue was examined histologically for presence of the KRAS mutations and for expression of hypoxia-inducible factor-1 (HIF-1) and minichromosome maintenance protein 2 (mcm2). The following imaging parameters were derived for each tumor: (18)F-FDG uptake ((18)F-FDG maximum standardized uptake value [SUVmax]), CT texture (expressed as mean of positive pixels [MPP]), and blood flow measured by dynamic contrast-enhanced CT. A recursive decision tree was developed in which the imaging investigations were applied sequentially to identify tumors with KRAS mutations. Monte Carlo analysis provided mean values and 95% confidence intervals for sensitivity, specificity, and accuracy. The final decision tree comprised 4 decision nodes and 5 terminal nodes, 2 of which identified KRAS mutants. The true-positive rate, false-positive rate, and accuracy (95% confidence intervals) of the decision tree were 82.4% (63.9%-93.9%), 0% (0%-10.4%), and 90.1% (79.2%-96.0%), respectively. KRAS mutants with high (18)F-FDG SUVmax and low MPP showed greater frequency of HIF-1 expression (P = 0.032). KRAS mutants with low (18)F-FDG SUV(max), high MPP, and high blood flow expressed mcm2 (P = 0.036). Multifunctional imaging with PET/CT and recursive decision-tree analysis to combine measurements of tumor (18)F-FDG uptake, CT texture, and perfusion has the potential to identify imaging signatures for colorectal cancers with KRAS mutations exhibiting hypoxic or proliferative phenotypes.
Mechanical properties and annealing texture of zirconium sheets

International Nuclear Information System (INIS)

Hanif-ur-Rehman; Khawaja, F.A.

1996-01-01

Mechanical properties like yield strength (YS), ultimate tensile strength(UTS), percentage elongation and annealing texture has been studied in sheets of commercially pure zirconium. The YS and UTS decrease as a function of annealing temperature up to 600 V, but both quantities have maximum value in sample annealed at 800 deg. C. The percentage elongation decreased with increase in annealing temperature up to 600 deg. C. A slight decrease and minimum value of percentage elongation was observed at 650 and 800 C respectively. The texture development in the annealed samples has been studied by the X-ray diffraction method. The sampled annealed at 800 deg. C showed a texture component (0001) [01 bar 10] with orientation density of about 8 times random, while the samples annealed at 600,650 and 700 deg. C showed a texture component (0001)[2 bar 110] with orientation density of about 5 times random. Thus it is concluded, that the texture component (0001)[2 bar 110] and (0001)[01 bar 10] at 650 and 800 geg. C respectively, may be the responsible for the increase in YS and UTS and decrease in percentage elongation at these temperatures. (author)
Doping profile measurement on textured silicon surface

Science.gov (United States)

Essa, Zahi; Taleb, Nadjib; Sermage, Bernard; Broussillou, Cédric; Bazer-Bachi, Barbara; Quillec, Maurice

2018-04-01

In crystalline silicon solar cells, the front surface is textured in order to lower the reflection of the incident light and increase the efficiency of the cell. This texturing whose dimensions are a few micrometers wide and high, often makes it difficult to determine the doping profile measurement. We have measured by secondary ion mass spectrometry (SIMS) and electrochemical capacitance voltage profiling the doping profile of implanted phosphorus in alkaline textured and in polished monocrystalline silicon wafers. The paper shows that SIMS gives accurate results provided the primary ion impact angle is small enough. Moreover, the comparison between these two techniques gives an estimation of the concentration of electrically inactive phosphorus atoms.
Microstructure and mechanical characteristics of laser coating-texturing alloying dimples

International Nuclear Information System (INIS)

Wan Daping; Chen Bingkui; Shao Yimin; Wang Shilong; Hu Dejin

2008-01-01

A novel laser coating-texturing (LCT) technique was proposed to achieve appropriate surface topographies and frictional behaviour. The LCT process was realized by applying laser pulses at very high repetition rate to produce innumerable micro-craters with required shape profile on the surface of the workpiece. Moreover, surface alloying of the dimples was carried out by melting submicron WC-TiC-Co alloy powder on the substrates. Morphology and microstructures of the texturing layers were characterised using optical microscopy (OM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). Mechanical properties of the textured samples were evaluated by abrasive resistance tests and microhardness measurement. Experimental results show that good fusion bonding between the texturing layers and the substrate has been formed, and the texturing layers are mainly composed of dense and hard fine-grained structures. The abrasive wear resistance of the laser coating-textured surface was 10 times higher than that of the substrates. The average surface microhardness values were as high as 830 HV.
The promise and limits of PET texture analysis.

Science.gov (United States)

Cheng, Nai-Ming; Fang, Yu-Hua Dean; Yen, Tzu-Chen

2013-11-01

Metabolic heterogeneity is a recognized characteristic of malignant tumors. Positron emission tomography (PET) texture analysis evaluated intratumoral heterogeneity in the uptake of (18)F-fluorodeoxyglucose. There were recent evidences that PET textural features were of prognostic significance in patients with different solid tumors. Unfortunately, there are still crucial standardization challenges to transform PET texture parameters from their current use as research tools into the arena of validated technologies for use in oncology practice. Testing its generalizability, robustness, consistency, and limitations is necessary before implementing it in daily patient care.
Effects of crystallographic texture on stress-migration resistance in copper thin films

International Nuclear Information System (INIS)

Koike, J.; Wada, M.; Sanada, M.; Maruyama, K.

2002-01-01

The crystallographic texture of heat-treated Cu thin films and its effects on stress-migration resistance were studied as a function of film thickness within a range of 50-900 nm. All as-deposited films had (111) texture. After heat treatment at 723 K, texture transition from (111) to (100) was observed in films of thickness greater than 300 nm. The (111) texture films after heat treatment showed severe stress migration; in contrast, the (100) texture films showed no noticeable stress migration. The observed stress-migration resistance in the (100) texture films can be attributed to the absence of twins and to lower thermal stress as compared with the (111) texture films
17th International Conference on Textures of Materials (ICOTOM 17)

International Nuclear Information System (INIS)

Skrotzki, Werner; Oertel, Carl-Georg

2015-01-01

The 17th International Conference on Textures of Materials (ICOTOM 17) took place in Dresden, Germany, August 24-29, 2014. It belongs to the 'triennial' series of ICOTOM meetings with a long tradition, starting in 1969 - Clausthal, 1971 - Cracow, 1973 - Pont-à-Mousson, 1975 - Cambridge, 1978 - Aachen, 1981 - Tokyo, 1984 - Noordwijkerhout, 1987 - Santa Fe, 1990 - Avignon, 1993 - Clausthal, 1996 - Xian, 1999 - Montreal, 2002 - Seoul, 2005 - Leuven, 2008 - Pittsburgh, 2011 - Mumbai, 2014 - Dresden. ICOTOM 17 was hosted by the Dresden University of Technology, Institute of Structural Physics. Following the tradition of the ICOTOM conferences, the main focus of ICOTOM-17 was to promote and strengthen the fundamental understanding of the basic processes that govern the formation of texture and its relation to the properties of polycrystalline materials. Nonetheless, it was the aim to forge links between basic research on model materials and applied research on engineering materials of technical importance. Thus, ICOTOM 17 provided a forum for the presentation and discussion of recent progress in research of texture and related anisotropy of mechanical and functional properties of all kinds of polycrystalline materials including natural materials like rocks. Particular attention was paid to recent advances in texture measurement and analysis as well as modeling of texture development for all kinds of processes like solidification, plastic deformation, recrystallization and grain growth, phase transformations, thin film deposition, etc. Hence, ICOTOM 17 was of great interest to materials scientists, engineers from many different areas and geoscientists. The topics covered by ICOTOM 17 were: 1. Mathematical, numerical and statistical methods of texture analysis 2. Deformation textures 3. Crystallization, recrystallization and growth textures 4. Transformation textures 5. Textures in functional materials 6. Textures in advanced materials 7. Textures in rocks 8
Real time gamma-ray signature identifier

Science.gov (United States)

Rowland, Mark [Alamo, CA; Gosnell, Tom B [Moraga, CA; Ham, Cheryl [Livermore, CA; Perkins, Dwight [Livermore, CA; Wong, James [Dublin, CA

2012-05-15

A real time gamma-ray signature/source identification method and system using principal components analysis (PCA) for transforming and substantially reducing one or more comprehensive spectral libraries of nuclear materials types and configurations into a corresponding concise representation/signature(s) representing and indexing each individual predetermined spectrum in principal component (PC) space, wherein an unknown gamma-ray signature may be compared against the representative signature to find a match or at least characterize the unknown signature from among all the entries in the library with a single regression or simple projection into the PC space, so as to substantially reduce processing time and computing resources and enable real-time characterization and/or identification.
Filtering Color Mapped Textures and Surfaces

OpenAIRE

Heitz , Eric; Nowrouzezahrai , Derek; Poulin , Pierre; Neyret , Fabrice

2013-01-01

International audience; Color map textures applied directly to surfaces, to geometric microsurface details, or to procedural functions (such as noise), are commonly used to enhance visual detail. Their simplicity and ability to mimic a wide range of realistic appearances have led to their adoption in many rendering problems. As with any textured or geometric detail, proper filtering is needed to reduce aliasing when viewed across a range of distances, but accurate and efficient color map filt...
A dynamical system approach to texel identification in regular textures

NARCIS (Netherlands)

Grigorescu, S.E.; Petkov, N.; Loncaric, S; Neri, A; Babic, H

2003-01-01

We propose a texture analysis method based on Rényi’s entropies. The method aims at identifying texels in regular textures by searching for the smallest window through which the minimum number of different visual patterns is observed when moving the window over a given texture. The experimental
Influence of texture on fracture toughness of zircaloy cladding

International Nuclear Information System (INIS)

Grigoriev, V.; Andersson, Stefan

1997-06-01

The correlation between texture and fracture toughness of Zircaloy 2 cladding has been investigated in connection with axial cracks in fuel rods. The texture of the cladding determines the anisotropy of plasticity of the cladding which, in turn, should influence the strain conditions at the crack-tip. Plastic strains in the cladding under uniaxial tension were characterised by means of the anisotropy constants F, G and H calculated according to Hill's theory. Test temperatures between 20 and 300 deg C do not influence the F, G and H values. Any significant effect of hydrogen (about 500 wtppm) on the anisotropy constants F, G and H has not been revealed at a test temperature of 300 deg C. The results, obtained for stress-relieved and recrystallized cladding with different texture, show an obvious influence of texture on the fracture toughness of Zircaloy cladding. A higher fracture toughness has been found for cladding with more radial texture
Influence of texture on fracture toughness of zircaloy cladding

Energy Technology Data Exchange (ETDEWEB)

Grigoriev, V. [Studsvik Material AB, Nykoeping (Sweden); Andersson, Stefan [Royal Inst. of Tech., Stockholm (Sweden)

1997-06-01

The correlation between texture and fracture toughness of Zircaloy 2 cladding has been investigated in connection with axial cracks in fuel rods. The texture of the cladding determines the anisotropy of plasticity of the cladding which, in turn, should influence the strain conditions at the crack-tip. Plastic strains in the cladding under uniaxial tension were characterised by means of the anisotropy constants F, G and H calculated according to Hill`s theory. Test temperatures between 20 and 300 deg C do not influence the F, G and H values. Any significant effect of hydrogen (about 500 wtppm) on the anisotropy constants F, G and H has not been revealed at a test temperature of 300 deg C. The results, obtained for stress-relieved and recrystallized cladding with different texture, show an obvious influence of texture on the fracture toughness of Zircaloy cladding. A higher fracture toughness has been found for cladding with more radial texture. With a 2 page summary in Swedish. 32 refs, 18 figs.
Automatic inspection of textured surfaces by support vector machines

Science.gov (United States)

Jahanbin, Sina; Bovik, Alan C.; Pérez, Eduardo; Nair, Dinesh

2009-08-01

Automatic inspection of manufactured products with natural looking textures is a challenging task. Products such as tiles, textile, leather, and lumber project image textures that cannot be modeled as periodic or otherwise regular; therefore, a stochastic modeling of local intensity distribution is required. An inspection system to replace human inspectors should be flexible in detecting flaws such as scratches, cracks, and stains occurring in various shapes and sizes that have never been seen before. A computer vision algorithm is proposed in this paper that extracts local statistical features from grey-level texture images decomposed with wavelet frames into subbands of various orientations and scales. The local features extracted are second order statistics derived from grey-level co-occurrence matrices. Subsequently, a support vector machine (SVM) classifier is trained to learn a general description of normal texture from defect-free samples. This algorithm is implemented in LabVIEW and is capable of processing natural texture images in real-time.
Texture alteration detection in bitemporal images of lesions with psoriasis

DEFF Research Database (Denmark)

Maletti, Gabriela Mariel; Ersbøll, Bjarne Kjær

2003-01-01

The objective of this work is to explore the feasibility of quantifying textural change between pairs of segmented patterns without registering them. The Multi-variate Alteration Detection (M.A.D.) Transform is applied to a texture model constructed with the data of segmented psoriasis lesions im...... images. The texture model is Haralick's co-occurrence matrix, which is computed and normalized for each single band with the equalized data of a given lesion. The contribution of each single color band to the textural change is analyzed....
Robust constraint on cosmic textures from the cosmic microwave background.

Science.gov (United States)

Feeney, Stephen M; Johnson, Matthew C; Mortlock, Daniel J; Peiris, Hiranya V

2012-06-15

Fluctuations in the cosmic microwave background (CMB) contain information which has been pivotal in establishing the current cosmological model. These data can also be used to test well-motivated additions to this model, such as cosmic textures. Textures are a type of topological defect that can be produced during a cosmological phase transition in the early Universe, and which leave characteristic hot and cold spots in the CMB. We apply bayesian methods to carry out a rigorous test of the texture hypothesis, using full-sky data from the Wilkinson Microwave Anisotropy Probe. We conclude that current data do not warrant augmenting the standard cosmological model with textures. We rule out at 95% confidence models that predict more than 6 detectable cosmic textures on the full sky.
Chemometric approach to texture profile analysis of kombucha fermented milk products.

Science.gov (United States)

Malbaša, Radomir; Jevrić, Lidija; Lončar, Eva; Vitas, Jasmina; Podunavac-Kuzmanović, Sanja; Milanović, Spasenija; Kovačević, Strahinja

2015-09-01

In the present work, relationships between the textural characteristics of fermented milk products obtained by kombucha inoculums with various teas were investigated by using chemometric analysis. The presented data which describe numerically the textural characteristics (firmness, consistency, cohesiveness and index of viscosity) were analysed. The quadratic correlation was determined between the textural characteristics of fermented milk products obtained at fermentation temperatures of 40 and 43 °C, using milk with 0.8, 1.6 and 2.8% milk fat and kombucha inoculums cultivated on the extracts of peppermint, stinging nettle, wild thyme and winter savory. Hierarchical cluster analysis (HCA) was performed to identify the similarities among the fermented products. The best mathematical models predicting the textural characteristics of investigated samples were developed. The results of this study indicate that textural characteristics of sample based on winter savory have a significant effect on textural characteristics of samples based on peppermint, stinging nettle and wild thyme, which can be very useful in the determination of products texture profile.

Effect of surface texturing on friction properties of WC/Co cemented carbide

International Nuclear Information System (INIS)

Wu, Ze; Deng, Jianxin; Xing, Youqiang; Cheng, Hongwei; Zhao, Jun

2012-01-01

Highlights: ► Tribological properties of surface textured WC/Co cemented carbide were studied. ► Textured surfaces have better performance of antifriction and antiwear. ► Area density of textures has significant effect on tribological performance. -- Abstract: An experimental study was carried out to investigate the tribological properties of different surface textured WC/Co cemented carbide. The influence of applied load, sliding speed and area density of textures on frictional performance of surface textured patterns was investigated by Taguchi method. Results show that the textured surfaces filled with molybdenum disulfide solid lubricants can reduce the average friction coefficient, wear rates of Ti–6Al–4V alloy balls and adhesion of Ti–6Al–4V alloy materials on the worn track of cemented carbide compared with un-textured ones. Variance analysis of the experimental data indicates that the area density of textures plays major contribution of both average friction coefficient and wear rate of Ti–6Al–4V alloy balls. Higher area density of textures is beneficial to improve tribological performance of the cemented carbide samples. Sliding speed seems to have no effect on the tribological performance of textured surfaces within the reliability interval of 90%. Applied load has effect on both average friction coefficient and wear rate of Ti–6Al–4V alloy balls at the reliability interval of 95%.
The role of friction in perceived oral texture

NARCIS (Netherlands)

Wijk, de R.A.; Prinz, J.F.

2005-01-01

Instrumentally measured in vitro friction in semi-solid foods was related to oral texture sensations. Increased fat content resulted in lower sensations of roughness, higher sensations of creaminess, and lower friction, suggesting that lubrication is the mechanism by which fat affects oral texture
Instrumental textural perception of food and comparative biomaterials

Science.gov (United States)

Texture is an important food quality attribute affecting consumer acceptance. Consumers characterize texture as either crispy or crunchy, and the moisture content and internal structure of the products are significant factors in its perception. Exposing an extruded corn snack (ECS), an extruded biod...
M-HinTS: Mimicking Humans in Texture Sorting

NARCIS (Netherlands)

van den Broek, Egon; Rogowitz, Bernice E.; van Rikxoort, Eva M.; Pappas, Thrasyvoulos N.; Kok, Thijs; Daly, Scott J.; Schouten, Theo E.

2006-01-01

Various texture analysis algorithms have been developed the last decades. However, no computational model has arisen that mimics human texture perception adequately. In 2000, Payne, Hepplewhite, and Stoneham and in 2005, Van Rikxoort, Van den Broek, and Schouten achieved mappings between humans and
Looking back at Facebook content and the positive impact upon wellbeing: Exploring reminiscing as a tool for self soothing

OpenAIRE

Good, Alice; Sambhanthan, Arunasalam; Panjganj, Vahid

2013-01-01

The premise of this paper is to explore the potential of reminiscing in facilitating self soothing. The research presented looks at people’s activities on Facebook and whether these particular activities impact upon their perceived sense of wellbeing, furthermore, whether specific Facebook activities enable a self –soothing effect when feeling low in mood. A survey was distributed amongst Facebook users. The results from the study appear to indicate that in comparison to other Facebook activi...
Intrinsic Problems In Determination Of Soil Texture In Calcareous Soils Of Arid Zones

Directory of Open Access Journals (Sweden)

Mozna A. Ahmed

2017-08-01

Full Text Available This study aimed at studying the effect of removal of CaCO3 on the texture of the soil profile and that of the control section in some Aridisols of the Sudan. Sixty soil profiles were sampled from Shendi area latitude1636 and longitude 33 48 River Nile State Sudan. These soils were analyzed for CaCO3 and 20 of these profiles were found to be of relatively appreciable calcareousness and were therefore selected for this study. The following three weighted soil textures were determined 1 before any removal of the CaCO3 Texture1 2 after the removal of CaCO3 Texture2 3 after amending the texture by adding the clay sized CaCO3 to the silt fraction Texture 3. Statistical analysis revealed significant differences among soil separates in the three textures except between clay of T2 and clay of T3 and among sand fractions in the three textures. That was not unexpected because the first texture included both mineral separates plus their equivalent size of CaCO3 the second texture included only the mineral separates in complete absence of CaCO3 while texture 3 was an amended texture. The change in the textural class amounted to 72 of the profiles. Statistical analysis in the weighted texture of the control section revealed that this texture was not affected except in two profiles. That could be attributed to the fact that the clay content of the soils of the study area did not fall at or near the boundary between any two major textural classes used in the Soil Taxonomy. The size of the CaCO3 was found in the order of clay size silt size sand size.
Research of second harmonic generation images based on texture analysis

Science.gov (United States)

Liu, Yao; Li, Yan; Gong, Haiming; Zhu, Xiaoqin; Huang, Zufang; Chen, Guannan

2014-09-01

Texture analysis plays a crucial role in identifying objects or regions of interest in an image. It has been applied to a variety of medical image processing, ranging from the detection of disease and the segmentation of specific anatomical structures, to differentiation between healthy and pathological tissues. Second harmonic generation (SHG) microscopy as a potential noninvasive tool for imaging biological tissues has been widely used in medicine, with reduced phototoxicity and photobleaching. In this paper, we clarified the principles of texture analysis including statistical, transform, structural and model-based methods and gave examples of its applications, reviewing studies of the technique. Moreover, we tried to apply texture analysis to the SHG images for the differentiation of human skin scar tissues. Texture analysis method based on local binary pattern (LBP) and wavelet transform was used to extract texture features of SHG images from collagen in normal and abnormal scars, and then the scar SHG images were classified into normal or abnormal ones. Compared with other texture analysis methods with respect to the receiver operating characteristic analysis, LBP combined with wavelet transform was demonstrated to achieve higher accuracy. It can provide a new way for clinical diagnosis of scar types. At last, future development of texture analysis in SHG images were discussed.
42 CFR 424.36 - Signature requirements.

Science.gov (United States)

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Signature requirements. 424.36 Section 424.36... (CONTINUED) MEDICARE PROGRAM CONDITIONS FOR MEDICARE PAYMENT Claims for Payment § 424.36 Signature requirements. (a) General rule. The beneficiary's own signature is required on the claim unless the beneficiary...
Unsupervised signature extraction from forensic logs

NARCIS (Netherlands)

Thaler, S.M.; Menkovski, V.; Petkovic, M.; Altun, Y.; Das, K.; Mielikäinen, T.; Malerba, D.; Stefanowski, J.; Read, J.; Žitnik, M.; Ceci, M.

2017-01-01

Signature extraction is a key part of forensic log analysis. It involves recognizing patterns in log lines such that log lines that originated from the same line of code are grouped together. A log signature consists of immutable parts and mutable parts. The immutable parts define the signature, and
Retail applications of signature verification

Science.gov (United States)

Zimmerman, Thomas G.; Russell, Gregory F.; Heilper, Andre; Smith, Barton A.; Hu, Jianying; Markman, Dmitry; Graham, Jon E.; Drews, Clemens

2004-08-01

The dramatic rise in identity theft, the ever pressing need to provide convenience in checkout services to attract and retain loyal customers, and the growing use of multi-function signature captures devices in the retail sector provides favorable conditions for the deployment of dynamic signature verification (DSV) in retail settings. We report on the development of a DSV system to meet the needs of the retail sector. We currently have a database of approximately 10,000 signatures collected from 600 subjects and forgers. Previous work at IBM on DSV has been merged and extended to achieve robust performance on pen position data available from commercial point of sale hardware, achieving equal error rates on skilled forgeries and authentic signatures of 1.5% to 4%.
Quantum signature scheme for known quantum messages

International Nuclear Information System (INIS)

Kim, Taewan; Lee, Hyang-Sook

2015-01-01

When we want to sign a quantum message that we create, we can use arbitrated quantum signature schemes which are possible to sign for not only known quantum messages but also unknown quantum messages. However, since the arbitrated quantum signature schemes need the help of a trusted arbitrator in each verification of the signature, it is known that the schemes are not convenient in practical use. If we consider only known quantum messages such as the above situation, there can exist a quantum signature scheme with more efficient structure. In this paper, we present a new quantum signature scheme for known quantum messages without the help of an arbitrator. Differing from arbitrated quantum signature schemes based on the quantum one-time pad with the symmetric key, since our scheme is based on quantum public-key cryptosystems, the validity of the signature can be verified by a receiver without the help of an arbitrator. Moreover, we show that our scheme provides the functions of quantum message integrity, user authentication and non-repudiation of the origin as in digital signature schemes. (paper)
Prediction of disease-free survival by the PET/CT radiomic signature in non-small cell lung cancer patients undergoing surgery

Energy Technology Data Exchange (ETDEWEB)

Kirienko, Margarita; Fogliata, Antonella; Sollini, Martina [Humanitas University, Department of Biomedical Sciences, Pieve Emanuele, Milan (Italy); Cozzi, Luca [Humanitas Clinical and Research Center, Radiotherapy and Radiosurgery, Rozzano, Milan (Italy); Antunovic, Lidija [Humanitas Clinical and Research Center, Nuclear Medicine, Rozzano, Milan (Italy); Lozza, Lisa [Orobix Srl, Bergamo (Italy); Voulaz, Emanuele [Humanitas Clinical and Research Center, Thoracic Surgery, Rozzano, Milan (Italy); Rossi, Alexia [Humanitas University, Department of Biomedical Sciences, Pieve Emanuele, Milan (Italy); Humanitas Clinical and Research Center, Radiology, Rozzano, Milan (Italy); Chiti, Arturo [Humanitas University, Department of Biomedical Sciences, Pieve Emanuele, Milan (Italy); Humanitas Clinical and Research Center, Nuclear Medicine, Rozzano, Milan (Italy)

2018-02-15

Radiomic features derived from the texture analysis of different imaging modalities e show promise in lesion characterisation, response prediction, and prognostication in lung cancer patients. The present study aimed to identify an images-based radiomic signature capable of predicting disease-free survival (DFS) in non-small cell lung cancer (NSCLC) patients undergoing surgery. A cohort of 295 patients was selected. Clinical parameters (age, sex, histological type, tumour grade, and stage) were recorded for all patients. The endpoint of this study was DFS. Both computed tomography (CT) and fluorodeoxyglucose positron emission tomography (PET) images generated from the PET/CT scanner were analysed. Textural features were calculated using the LifeX package. Statistical analysis was performed using the R platform. The datasets were separated into two cohorts by random selection to perform training and validation of the statistical models. Predictors were fed into a multivariate Cox proportional hazard regression model and the receiver operating characteristic (ROC) curve as well as the corresponding area under the curve (AUC) were computed for each model built. The Cox models that included radiomic features for the CT, the PET, and the PET+CT images resulted in an AUC of 0.75 (95%CI: 0.65-0.85), 0.68 (95%CI: 0.57-0.80), and 0.68 (95%CI: 0.58-0.74), respectively. The addition of clinical predictors to the Cox models resulted in an AUC of 0.61 (95%CI: 0.51-0.69), 0.64 (95%CI: 0.53-0.75), and 0.65 (95%CI: 0.50-0.72) for the CT, the PET, and the PET+CT images, respectively. A radiomic signature, for either CT, PET, or PET/CT images, has been identified and validated for the prediction of disease-free survival in patients with non-small cell lung cancer treated by surgery. (orig.)
Evolution of microstructure, texture and topography during additional annealing of cube-textured Ni–5at.%W substrate for coated conductors

DEFF Research Database (Denmark)

Wulff, Anders Christian; Mishin, Oleg; Grivel, Jean-Claude

2012-01-01

Microstructure, texture and topography have been studied in a recrystallized Ni–5at.%W substrate before and after additional annealing at 1025C for 1 h. The initial recrystallized material contained a strong cube texture and a high fraction of low angle grain boundaries. R3 boundaries were also f...
7 CFR 718.9 - Signature requirements.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Signature requirements. 718.9 Section 718.9... MULTIPLE PROGRAMS General Provisions § 718.9 Signature requirements. (a) When a program authorized by this chapter or Chapter XIV of this title requires the signature of a producer; landowner; landlord; or tenant...
27 CFR 17.6 - Signature authority.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Signature authority. 17.6... PRODUCTS General Provisions § 17.6 Signature authority. No claim, bond, tax return, or other required... other proper notification of signature authority has been filed with the TTB office where the required...
Texture and superelastic behavior of cold-rolled TiNbTaZr alloy

International Nuclear Information System (INIS)

Wang Liqiang; Lu Weijie; Qin Jining; Zhang Fan; Zhang Di

2008-01-01

This work investigates the deformation texture and strain-induced α'' martensite texture of TiNbTaZr alloy during cold rolling. The alloy is rolled by 20% and 90% reductions without changing rolling direction. Textures of cold-rolled specimens are investigated by X-ray diffraction measurements. Besides {2 2 1} β β twinning texture, {1 0 0} β β texture is developed in the specimen with 20% reduction. In the 90% cold-rolled specimen, {1 0 0} β β texture appears along rolling direction and strain-induced α'' martensite texture tends to [0 1 0] and [0 0 1] directions along rolling direction (RD) and transverse direction (TD), respectively. Superelastic strain (ε SE ) exhibits higher value along RD and TD. Pure elastic strain (ε E ) shows higher value along RD and 45 deg. from RD
AUTOMATIC TEXTURE MAPPING OF ARCHITECTURAL AND ARCHAEOLOGICAL 3D MODELS

Directory of Open Access Journals (Sweden)

T. P. Kersten

2012-07-01

Full Text Available Today, detailed, complete and exact 3D models with photo-realistic textures are increasingly demanded for numerous applications in architecture and archaeology. Manual texture mapping of 3D models by digital photographs with software packages, such as Maxon Cinema 4D, Autodesk 3Ds Max or Maya, still requires a complex and time-consuming workflow. So, procedures for automatic texture mapping of 3D models are in demand. In this paper two automatic procedures are presented. The first procedure generates 3D surface models with textures by web services, while the second procedure textures already existing 3D models with the software tmapper. The program tmapper is based on the Multi Layer 3D image (ML3DImage algorithm and developed in the programming language C++. The studies showing that the visibility analysis using the ML3DImage algorithm is not sufficient to obtain acceptable results of automatic texture mapping. To overcome the visibility problem the Point Cloud Painter algorithm in combination with the Z-buffer-procedure will be applied in the future.
Automatic Texture Mapping of Architectural and Archaeological 3d Models

Science.gov (United States)

Kersten, T. P.; Stallmann, D.

2012-07-01

Today, detailed, complete and exact 3D models with photo-realistic textures are increasingly demanded for numerous applications in architecture and archaeology. Manual texture mapping of 3D models by digital photographs with software packages, such as Maxon Cinema 4D, Autodesk 3Ds Max or Maya, still requires a complex and time-consuming workflow. So, procedures for automatic texture mapping of 3D models are in demand. In this paper two automatic procedures are presented. The first procedure generates 3D surface models with textures by web services, while the second procedure textures already existing 3D models with the software tmapper. The program tmapper is based on the Multi Layer 3D image (ML3DImage) algorithm and developed in the programming language C++. The studies showing that the visibility analysis using the ML3DImage algorithm is not sufficient to obtain acceptable results of automatic texture mapping. To overcome the visibility problem the Point Cloud Painter algorithm in combination with the Z-buffer-procedure will be applied in the future.
Online Signature Verification on MOBISIG Finger-Drawn Signature Corpus

Directory of Open Access Journals (Sweden)

Margit Antal

2018-01-01

Full Text Available We present MOBISIG, a pseudosignature dataset containing finger-drawn signatures from 83 users captured with a capacitive touchscreen-based mobile device. The database was captured in three sessions resulting in 45 genuine signatures and 20 skilled forgeries for each user. The database was evaluated by two state-of-the-art methods: a function-based system using local features and a feature-based system using global features. Two types of equal error rate computations are performed: one using a global threshold and the other using user-specific thresholds. The lowest equal error rate was 0.01% against random forgeries and 5.81% against skilled forgeries using user-specific thresholds that were computed a posteriori. However, these equal error rates were significantly raised to 1.68% (random forgeries case and 14.31% (skilled forgeries case using global thresholds. The same evaluation protocol was performed on the DooDB publicly available dataset. Besides verification performance evaluations conducted on the two finger-drawn datasets, we evaluated the quality of the samples and the users of the two datasets using basic quality measures. The results show that finger-drawn signatures can be used by biometric systems with reasonable accuracy.
48 CFR 804.101 - Contracting officer's signature.

Science.gov (United States)

2010-10-01

... signature. 804.101 Section 804.101 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS GENERAL ADMINISTRATIVE MATTERS Contract Execution 804.101 Contracting officer's signature. (a) If a... signature. ...

AN ILLUMINATION INVARIANT TEXTURE BASED FACE RECOGNITION

Directory of Open Access Journals (Sweden)

K. Meena

2013-11-01

Full Text Available Automatic face recognition remains an interesting but challenging computer vision open problem. Poor illumination is considered as one of the major issue, since illumination changes cause large variation in the facial features. To resolve this, illumination normalization preprocessing techniques are employed in this paper to enhance the face recognition rate. The methods such as Histogram Equalization (HE, Gamma Intensity Correction (GIC, Normalization chain and Modified Homomorphic Filtering (MHF are used for preprocessing. Owing to great success, the texture features are commonly used for face recognition. But these features are severely affected by lighting changes. Hence texture based models Local Binary Pattern (LBP, Local Derivative Pattern (LDP, Local Texture Pattern (LTP and Local Tetra Patterns (LTrPs are experimented under different lighting conditions. In this paper, illumination invariant face recognition technique is developed based on the fusion of illumination preprocessing with local texture descriptors. The performance has been evaluated using YALE B and CMU-PIE databases containing more than 1500 images. The results demonstrate that MHF based normalization gives significant improvement in recognition rate for the face images with large illumination conditions.
Texturing in titanium grade 2 surface irradiate with ultrashort pulse laser

International Nuclear Information System (INIS)

Nogueira, Alessandro Francelino

2015-01-01

The texturing laser micromachining is an important alternative to improve the bonding adhesion between composites and titanium, which are applied to structural components in the aerospace industry. The texturing running on titanium plates is due to the fact that the preferred joining technique for many composite materials is the adhesive bonding. In this work, titanium plates were texturized using laser ultrashort pulses temporal widths of femtoseconds. This process resulted in minimal heat transfer to the material, avoiding deformation of the titanium plate surface as well as the formation of resolidified material in the ablated region. These drawbacks have occurred with the use of nanoseconds pulses. Were performed three types of texturing using laser with femtosecond pulses, with variations in the distances between the machined lines. The analysis of the obtained surfaces found that the wettability increases when there is the increased distance between the texturing lines. Advancing in the analysis by optical profilometry of textured surfaces was observed that there is substantial increase in the volume available for penetration of structural adhesive when the distances between the textured lines are diminished. In tensile tests conducted it was observed that there is an increase in shear strength of the adhesive joint by reducing the distance between the textured lines. (author)
The evolution of texture in aluminum alloy sheet during asymmetric rolling

International Nuclear Information System (INIS)

Kim, K-H.; Lee, D.N.

2000-01-01

Asymmetric rolling, in which the upper and lower roll radii are different, imposes shear deformation on sheets through the thickness, which in turn gives rise to shear deformation textures in the sheets through the thickness. A component of ND// in the shear deformation textures can improve the plastic strain ratios of aluminum sheets. In order to understand the evolution of ND// , the strain histories and distributions in the sheets during the asymmetric rolling are calculated by the finite element method. The strain history and distribution are used to calculate crystallographic orientations and stable orientations based on the Taylor-Bishop-Hill theory and the Renouward-Wintenberger theory. The shear deformation texture can vary with the ratio of shear to normal strain increments. As the ratio increases from zero to infinity, the texture moves from the plane strain compression texture (β fiber) to the ideal shear deformation texture consisting of {001} , {111} , and {111} . The ratio increases with rolling reduction per pass in asymmetric rolling. However, it is practically difficult to the rolling reduction per pass high enough to obtain the ideal shear deformation texture. Imposing the positive and negative shear deformations on the sheet by reversing the shearing direction can give rise to the ideal shear deformation texture. This has been discussed. (author)
Peer support for family carers of people with dementia, alone or in combination with group reminiscence in a factorial design: study protocol for a randomised controlled trial

Directory of Open Access Journals (Sweden)

Wenborn Jennifer

2011-09-01

Full Text Available Abstract Background Peer support interventions can improve carer wellbeing and interventions that engage both the carer and person with dementia can have significant mutual benefits. Existing research has been criticised for inadequate rigour of design or reporting. This paper describes the protocol for a complex trial that evaluates one-to-one peer support and a group reminiscence programme, both separately and together, in a factorial design. Design A 2 × 2 factorial multi-site randomised controlled trial of individual peer support and group reminiscence interventions for family carers and people with dementia in community settings in England, addressing both effectiveness and cost-effectiveness. Discussion The methods described in this protocol have implications for research into psychosocial interventions, particularly complex interventions seeking to test both individual and group approaches. Trial Registration ISRCTN37956201
Temporal resolution of orientation-defined texture segregation: a VEP study.

Science.gov (United States)

Lachapelle, Julie; McKerral, Michelle; Jauffret, Colin; Bach, Michael

2008-09-01

Orientation is one of the visual dimensions that subserve figure-ground discrimination. A spatial gradient in orientation leads to "texture segregation", which is thought to be concurrent parallel processing across the visual field, without scanning. In the visual-evoked potential (VEP) a component can be isolated which is related to texture segregation ("tsVEP"). Our objective was to evaluate the temporal frequency dependence of the tsVEP to compare processing speed of low-level features (e.g., orientation, using the VEP, here denoted llVEP) with texture segregation because of a recent literature controversy in that regard. Visual-evoked potentials (VEPs) were recorded in seven normal adults. Oriented line segments of 0.1 degrees x 0.8 degrees at 100% contrast were presented in four different arrangements: either oriented in parallel for two homogeneous stimuli (from which were obtained the low-level VEP (llVEP)) or with a 90 degrees orientation gradient for two textured ones (from which were obtained the texture VEP). The orientation texture condition was presented at eight different temporal frequencies ranging from 7.5 to 45 Hz. Fourier analysis was used to isolate low-level components at the pattern-change frequency and texture-segregation components at half that frequency. For all subjects, there was lower high-cutoff frequency for tsVEP than for llVEPs, on average 12 Hz vs. 17 Hz (P = 0.017). The results suggest that the processing of feature gradients to extract texture segregation requires additional processing time, resulting in a lower fusion frequency.
The role of textures in the forming of automotive sheet steels

International Nuclear Information System (INIS)

Sanak Mishra

1996-01-01

Crystallographic textures generally have a strong bearing on the drawability of sheet steels. Particularly in the case of automotive sheets, texture control is of paramount importance. In the last two decades, therefore, texture research has assumed much significance in the steel industry. X-ray diffraction continues to remain the most used tool for the study of textures. Early researches, from about 1940 to 1980, were invariably carried out by the pole figure method. However, for more quantitative results the ODF (Orientation Distribution Functions) analysis technique was developed. Since 1980, the ODF analysis has come to be used extensively. In the present paper, several unique features of textures in automotive grade deep drawing steels, as revealed from X-ray ODFS, will be presented. The relative importance of the various textural components with respect to forming will also be dealt with
A psychophysically validated metric for bidirectional texture data reduction

Czech Academy of Sciences Publication Activity Database

Filip, Jiří; Chantler, M.J.; Green, P.R.; Haindl, Michal

2008-01-01

Roč. 27, č. 5 (2008), s. 138:1-138:11 ISSN 0730-0301 R&D Projects: GA AV ČR 1ET400750407; GA ČR GA102/08/0593 Institutional research plan: CEZ:AV0Z10750506 Keywords : Bidirectional Texture Functions * texture compression Subject RIV: BD - Theory of Information Impact factor: 3.383, year: 2008 http://library.utia.cas.cz/separaty/2008/RO/haindl-a psychophysically validated metric for bidirectional texture data reduction.pdf
Texture analysis of Napoleonic War Era copper bolts

Science.gov (United States)

Malamud, Florencia; Northover, Shirley; James, Jon; Northover, Peter; Kelleher, Joe

2016-04-01

Neutron diffraction techniques are suitable for volume texture analyses due to high penetration of thermal neutrons in most materials. We have implemented a new data analysis methodology that employed the spatial resolution achievable by a time-of-flight neutron strain scanner to non-destructively determine the crystallographic texture at selected locations within a macroscopic sample. The method is based on defining the orientation distribution function of the crystallites from several incomplete pole figures, and it has been implemented on ENGIN-X, a neutron strain scanner at the Isis Facility in the UK. Here, we demonstrate the application of this new texture analysis methodology in determining the crystallographic texture at selected locations within museum quality archaeological objects up to 1 m in length. The results were verified using samples of similar, but less valuable, objects by comparing the results of applying this method with those obtained using both electron backscatter diffraction and X-ray diffraction on their cross sections.
Perancangan Aplikasi Undeniable Digital Signature Dengan Algoritma Chaum’s Blind Signature

OpenAIRE

Simanjuntak, Martin Dennain

2012-01-01

Desperaty need a securiry system in the exchange of information via computer media, so that information can not be accessed by unauthorized parties. One of the security system is to use a system of digital signatures as a means of authenticating the authenticity of digital document that are exchanged. By using a digital a digital signature system is undeniable, the security system can be generated digital document exchange, where the system is free from the from of rejection...
Practical quantum digital signature

Science.gov (United States)

Yin, Hua-Lei; Fu, Yao; Chen, Zeng-Bing

2016-03-01

Guaranteeing nonrepudiation, unforgeability as well as transferability of a signature is one of the most vital safeguards in today's e-commerce era. Based on fundamental laws of quantum physics, quantum digital signature (QDS) aims to provide information-theoretic security for this cryptographic task. However, up to date, the previously proposed QDS protocols are impractical due to various challenging problems and most importantly, the requirement of authenticated (secure) quantum channels between participants. Here, we present the first quantum digital signature protocol that removes the assumption of authenticated quantum channels while remaining secure against the collective attacks. Besides, our QDS protocol can be practically implemented over more than 100 km under current mature technology as used in quantum key distribution.
Friction reduction using discrete surface textures: principle and design

International Nuclear Information System (INIS)

Hsu, Stephen M; Jing, Yang; Hua, Diann; Zhang, Huan

2014-01-01

There have been many reports on the use of dimples, grooves, and other surface textures to control friction in sliding interfaces. The effectiveness of surface textures in friction reduction has been demonstrated in conformal contacts under high speed low load applications such as mechanical seals and automotive water pump seals, etc., resulting in reduced friction and longer durability. For sliding components with higher contact pressures or lower speeds, conflicting results were reported. Reasons for the inconsistency may be due to the differences in texture fabrication techniques, lack of dimple size and shape uniformity, and different tester used. This paper examines the basic principles on which surface textural patterns influence friction under the three principle lubrication regimes: hydrodynamic, elastohydrodynamic, and boundary lubrication regimes. Our findings suggest that each regime requires specific dimple size, shape, depth, and areal density to achieve friction reduction. Control experiments were also conducted to explore mechanisms of friction reduction. The dimple geometric shape and the dimple's orientation with respect to the sliding direction influence friction significantly. The underlying mechanisms for friction control via textures are discussed. (paper)
The structure of surface texture knowledge

International Nuclear Information System (INIS)

Yan Wang; Scott, Paul J; Jiang Xiangqian

2005-01-01

This research aims to create an intelligent knowledge-based system for engineering and bio-medical engineering surface texture, which will provide expert knowledge of surface texture to link surface function, specification of micro- and nano-geometry through manufacture, and verification. The intelligent knowledge base should be capable of incorporating knowledge from multiple sources (standards, books, experts, etc), adding new knowledge from these sources and still remain a coherent reliable system. A new data model based on category theory will be adopted to construct this system
25 CFR 213.10 - Lessor's signature.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Lessor's signature. 213.10 Section 213.10 Indians BUREAU... MEMBERS OF FIVE CIVILIZED TRIBES, OKLAHOMA, FOR MINING How to Acquire Leases § 213.10 Lessor's signature... thumbprint which shall be designated as “right” or “left” thumbmark. Such signatures must be witnessed by two...
Initial Semantics for Strengthened Signatures

Directory of Open Access Journals (Sweden)

André Hirschowitz

2012-02-01

Full Text Available We give a new general definition of arity, yielding the companion notions of signature and associated syntax. This setting is modular in the sense requested by Ghani and Uustalu: merging two extensions of syntax corresponds to building an amalgamated sum. These signatures are too general in the sense that we are not able to prove the existence of an associated syntax in this general context. So we have to select arities and signatures for which there exists the desired initial monad. For this, we follow a track opened by Matthes and Uustalu: we introduce a notion of strengthened arity and prove that the corresponding signatures have initial semantics (i.e. associated syntax. Our strengthened arities admit colimits, which allows the treatment of the λ-calculus with explicit substitution.
Spectral signature selection for mapping unvegetated soils

Science.gov (United States)

May, G. A.; Petersen, G. W.

1975-01-01

Airborne multispectral scanner data covering the wavelength interval from 0.40-2.60 microns were collected at an altitude of 1000 m above the terrain in southeastern Pennsylvania. Uniform training areas were selected within three sites from this flightline. Soil samples were collected from each site and a procedure developed to allow assignment of scan line and element number from the multispectral scanner data to each sampling location. These soil samples were analyzed on a spectrophotometer and laboratory spectral signatures were derived. After correcting for solar radiation and atmospheric attenuation, the laboratory signatures were compared to the spectral signatures derived from these same soils using multispectral scanner data. Both signatures were used in supervised and unsupervised classification routines. Computer-generated maps using the laboratory and multispectral scanner derived signatures resulted in maps that were similar to maps resulting from field surveys. Approximately 90% agreement was obtained between classification maps produced using multispectral scanner derived signatures and laboratory derived signatures.
Time Series Based for Online Signature Verification

Directory of Open Access Journals (Sweden)

I Ketut Gede Darma Putra

2013-11-01

Full Text Available Signature verification system is to match the tested signature with a claimed signature. This paper proposes time series based for feature extraction method and dynamic time warping for match method. The system made by process of testing 900 signatures belong to 50 participants, 3 signatures for reference and 5 signatures from original user, simple imposters and trained imposters for signatures test. The final result system was tested with 50 participants with 3 references. This test obtained that system accuracy without imposters is 90,44897959% at threshold 44 with rejection errors (FNMR is 5,2% and acceptance errors (FMR is 4,35102%, when with imposters system accuracy is 80,1361% at threshold 27 with error rejection (FNMR is 15,6% and acceptance errors (average FMR is 4,263946%, with details as follows: acceptance errors is 0,391837%, acceptance errors simple imposters is 3,2% and acceptance errors trained imposters is 9,2%.
Genome signature analysis of thermal virus metagenomes reveals Archaea and thermophilic signatures.

Science.gov (United States)

Pride, David T; Schoenfeld, Thomas

2008-09-17

Metagenomic analysis provides a rich source of biological information for otherwise intractable viral communities. However, study of viral metagenomes has been hampered by its nearly complete reliance on BLAST algorithms for identification of DNA sequences. We sought to develop algorithms for examination of viral metagenomes to identify the origin of sequences independent of BLAST algorithms. We chose viral metagenomes obtained from two hot springs, Bear Paw and Octopus, in Yellowstone National Park, as they represent simple microbial populations where comparatively large contigs were obtained. Thermal spring metagenomes have high proportions of sequences without significant Genbank homology, which has hampered identification of viruses and their linkage with hosts. To analyze each metagenome, we developed a method to classify DNA fragments using genome signature-based phylogenetic classification (GSPC), where metagenomic fragments are compared to a database of oligonucleotide signatures for all previously sequenced Bacteria, Archaea, and viruses. From both Bear Paw and Octopus hot springs, each assembled contig had more similarity to other metagenome contigs than to any sequenced microbial genome based on GSPC analysis, suggesting a genome signature common to each of these extreme environments. While viral metagenomes from Bear Paw and Octopus share some similarity, the genome signatures from each locale are largely unique. GSPC using a microbial database predicts most of the Octopus metagenome has archaeal signatures, while bacterial signatures predominate in Bear Paw; a finding consistent with those of Genbank BLAST. When using a viral database, the majority of the Octopus metagenome is predicted to belong to archaeal virus Families Globuloviridae and Fuselloviridae, while none of the Bear Paw metagenome is predicted to belong to archaeal viruses. As expected, when microbial and viral databases are combined, each of the Octopus and Bear Paw metagenomic contigs
Plasma-nitriding assisted micro-texturing into stainless steel molds

Directory of Open Access Journals (Sweden)

Aizawa Tatsuhiko

2015-01-01

Full Text Available Micro-texturing has grown up to be one of the most promising procedures. This related application required for large-area, fine micro-texturing onto the stainless steel mold materials. A new method other than laser-machining, micro-milling or micro-EDM was awaited for further advancement of this micro-texturing. In the present paper, a plasma nitriding assisted micro-texturing was developed to make various kinds of micro-patterns onto the martensitic stainless steels. First, original patterns were printed onto the surface of substrate by using the ink-jet printer. Then, the masked substrate was subjected to high density plasma nitriding; the un-masked surfaces were nitrided to have higher hardness. This nitrided substrate was further treated by sand-blasting to selectively dig the soft, masked surfaces. Finally, the micro-patterned martensitic stainless steel substrate was fabricated as a mold to duplicate these micro-patterns onto the work materials. The spatial resolution and depth profile controllability of this plasma nitriding assisted micro-texturing was investigated for variety of initial micro-patterns. The original size and dimension of initial micro-patterns were precisely compared with the three dimensional geometry of micro-textures after blasting treatment. The plastic cover case for smart cellular phones was employed to demonstrate how useful this processing is in practice.
Signatures de l'invisible

CERN Multimedia

CERN Press Office. Geneva

2000-01-01

"Signatures of the Invisible" is an unique collaboration between contemporary artists and contemporary physicists which has the potential to help redefine the relationship between science and art. "Signatures of the Invisible" is jointly organised by the London Institute - the world's largest college of art and design and CERN*, the world's leading particle physics laboratory. 12 leading visual artists:
Effect of texturing on polarization switching dynamics in ferroelectric ceramics

Science.gov (United States)

Zhukov, Sergey; Genenko, Yuri A.; Koruza, Jurij; Schultheiß, Jan; von Seggern, Heinz; Sakamoto, Wataru; Ichikawa, Hiroki; Murata, Tatsuro; Hayashi, Koichiro; Yogo, Toshinobu

2016-01-01

Highly (100),(001)-oriented (Ba0.85Ca0.15)TiO3 (BCT) lead-free piezoelectric ceramics were fabricated by the reactive templated grain growth method using a mixture of plate-like CaTiO3 and BaTiO3 particles. Piezoelectric properties of the ceramics with a high degree of texture were found to be considerably enhanced compared with the BCT ceramics with a low degree of texture. With increasing the Lotgering factor from 26% up to 94%, the piezoelectric properties develop towards the properties of a single crystal. The dynamics of polarization switching was studied over a broad time domain of 8 orders of magnitude and was found to strongly depend on the degree of orientation of the ceramics. Samples with a high degree of texture exhibited 2-3 orders of magnitude faster polarization switching, as compared with the ones with a low degree of texture. This was rationalized by means of the Inhomogeneous Field Mechanism model as a result of the narrower statistical distribution of the local electric field values in textured media, which promotes a more coherent switching process. The extracted microscopic parameters of switching revealed a decrease of the critical nucleus energy in systems with a high degree of texture providing more favorable switching conditions related to the enhanced ferroelectric properties of the textured material.

A group signature scheme based on quantum teleportation

International Nuclear Information System (INIS)

Wen Xiaojun; Tian Yuan; Ji Liping; Niu Xiamu

2010-01-01

In this paper, we present a group signature scheme using quantum teleportation. Different from classical group signature and current quantum signature schemes, which could only deliver either group signature or unconditional security, our scheme guarantees both by adopting quantum key preparation, quantum encryption algorithm and quantum teleportation. Security analysis proved that our scheme has the characteristics of group signature, non-counterfeit, non-disavowal, blindness and traceability. Our quantum group signature scheme has a foreseeable application in the e-payment system, e-government, e-business, etc.
A group signature scheme based on quantum teleportation

Energy Technology Data Exchange (ETDEWEB)

Wen Xiaojun; Tian Yuan; Ji Liping; Niu Xiamu, E-mail: wxjun36@gmail.co [Information Countermeasure Technique Research Institute, Harbin Institute of Technology, Harbin 150001 (China)

2010-05-01

In this paper, we present a group signature scheme using quantum teleportation. Different from classical group signature and current quantum signature schemes, which could only deliver either group signature or unconditional security, our scheme guarantees both by adopting quantum key preparation, quantum encryption algorithm and quantum teleportation. Security analysis proved that our scheme has the characteristics of group signature, non-counterfeit, non-disavowal, blindness and traceability. Our quantum group signature scheme has a foreseeable application in the e-payment system, e-government, e-business, etc.
Assessment Of Mold-Design Dependent Textures In CIM-Components By Polarized Light Optical Texture Analysis (PLOTA)

International Nuclear Information System (INIS)

Kern, Frank; Rauch, Johannes; Gadow, Rainer

2007-01-01

By thermoplastic ceramic injection moulding (CIM) ceramic components of high complexity can be produced in a large number of items at low dimensional tolerances. The cost advantage by the high degree of automation leads to an economical mass-production. The structure of injection-moulded components is determined by the form filling behaviour and viscosity of the feedstock, the machine parameters, the design of the mold and the gate design. With an adapted mold- and gate-design CIM-components without textures are possible. The ''Polarized Light Optical Texture analysis'' (PLOTA) makes it possible to inspect the components and detect and quantify the textures produced by a new mold. Based on the work of R. Fischer (2004) the PLOTA procedure was improved by including the possibility to measure the inclination angle and thus describe the orientation of the grains in three dimensions. Sampled thin sections of ceramic components are analysed under the polarization microscope and are brought in diagonal position. Pictures are taken with a digital camera. The pictures are converted in the L*a*b*- colour space and the crystals color values a* and b* in the picture are measured. The color values are compared with the values of a quartz wedge, which serves as universal standard. From the received values the inclination angle can be calculated relative to the microscope axis. It is possible to use the received data quantitatively e.g. for the FEM supported simulation of texture-conditioned divergences of mechanical values. Thus the injection molding parameters can be optimized to obtain improved mechanical properties
Visual perception of procedural textures: identifying perceptual dimensions and predicting generation models.

Science.gov (United States)

Liu, Jun; Dong, Junyu; Cai, Xiaoxu; Qi, Lin; Chantler, Mike

2015-01-01

Procedural models are widely used in computer graphics for generating realistic, natural-looking textures. However, these mathematical models are not perceptually meaningful, whereas the users, such as artists and designers, would prefer to make descriptions using intuitive and perceptual characteristics like "repetitive," "directional," "structured," and so on. To make up for this gap, we investigated the perceptual dimensions of textures generated by a collection of procedural models. Two psychophysical experiments were conducted: free-grouping and rating. We applied Hierarchical Cluster Analysis (HCA) and Singular Value Decomposition (SVD) to discover the perceptual features used by the observers in grouping similar textures. The results suggested that existing dimensions in literature cannot accommodate random textures. We therefore utilized isometric feature mapping (Isomap) to establish a three-dimensional perceptual texture space which better explains the features used by humans in texture similarity judgment. Finally, we proposed computational models to map perceptual features to the perceptual texture space, which can suggest a procedural model to produce textures according to user-defined perceptual scales.
Visual perception of procedural textures: identifying perceptual dimensions and predicting generation models.

Directory of Open Access Journals (Sweden)

Jun Liu

Full Text Available Procedural models are widely used in computer graphics for generating realistic, natural-looking textures. However, these mathematical models are not perceptually meaningful, whereas the users, such as artists and designers, would prefer to make descriptions using intuitive and perceptual characteristics like "repetitive," "directional," "structured," and so on. To make up for this gap, we investigated the perceptual dimensions of textures generated by a collection of procedural models. Two psychophysical experiments were conducted: free-grouping and rating. We applied Hierarchical Cluster Analysis (HCA and Singular Value Decomposition (SVD to discover the perceptual features used by the observers in grouping similar textures. The results suggested that existing dimensions in literature cannot accommodate random textures. We therefore utilized isometric feature mapping (Isomap to establish a three-dimensional perceptual texture space which better explains the features used by humans in texture similarity judgment. Finally, we proposed computational models to map perceptual features to the perceptual texture space, which can suggest a procedural model to produce textures according to user-defined perceptual scales.
Functionality of extrusion--texturized whey proteins.

Science.gov (United States)

Onwulata, C I; Konstance, R P; Cooke, P H; Farrell, H M

2003-11-01

Whey, a byproduct of the cheesemaking process, is concentrated by processors to make whey protein concentrates (WPC) and isolates (WPI). Only 50% of whey proteins are used in foods. In order to increase their usage, texturizing WPC, WPI, and whey albumin is proposed to create ingredients with new functionality. Extrusion processing texturizes globular proteins by shearing and stretching them into aligned or entangled fibrous bundles. In this study, WPC, WPI, and whey albumin were extruded in a twin screw extruder at approximately 38% moisture content (15.2 ml/min, feed rate 25 g/min) and, at different extrusion cook temperatures, at the same temperature for the last four zones before the die (35, 50, 75, and 100 degrees C, respectively). Protein solubility, gelation, foaming, and digestibility were determined in extrudates. Degree of extrusion-induced insolubility (denaturation) or texturization, determined by lack of solubility at pH 7 for WPI, increased from 30 to 60, 85, and 95% for the four temperature conditions 35, 50, 75, and 100 degrees C, respectively. Gel strength of extruded isolates increased initially 115% (35 degrees C) and 145% (50 degrees C), but gel strength was lost at 75 and 100 degrees C. Denaturation at these melt temperatures had minimal effect on foaming and digestibility. Varying extrusion cook temperature allowed a new controlled rate of denaturation, indicating that a texturized ingredient with a predetermined functionality based on degree of denaturation can be created.
Textural states of a hot-worked MA2-1 magnesium alloy

Science.gov (United States)

Serebryany, V. N.; Kochubei, A. Ya.; Kurtasov, S. F.; Mel'Nikov, K. E.

2007-02-01

Quantitative texture analysis is used to study texture formation in an MA2-1 magnesium alloy subjected to axisymmetric upsetting at temperatures of 250-450°C and strain rates of 10-4-100 -1. The deformed structure is examined by optical microscopy, and the results obtained are used to plot the structural-state diagram of the alloy after 50% upsetting. The experimental textures are compared with the textures calculated in terms of a thermoactivation model.
Quantitative analysis of textures produced in a hot-extruded zirconium plate

International Nuclear Information System (INIS)

Couterne, J.

1967-01-01

The textures produced in zirconium by the extrusion at 730 deg C of a cylindrical billet in the form of a plate having a rectangular cross-section, have been studied by the Schulz method using an isotropic standard. These textures have been determined both parallel to the plane of the plate and parallel to the plane of the sides, All the results are analyzed in a final discussion which makes it possible to show, in particular near the edges of the plate, that certain components of the textures observed in the two series of recordings are in fact aspects of the same texture seen from two different angles, It is shown furthermore that the zirconium thus shaped has cold-work textures and als recrystallisation textures formed after the preceding cold-working, If the observed textures are considered schematically, it can be see that two of these have already been described in the literature and are similar to those found in rolled products: these textures are such that the (0001) planes are inclined at 36 deg C and 60 deg C respectively with respect to a plan tangential to the curve (envelope of transverse flow rates) resulting from the extrusion geometry under consideration; the third texture is defined. by the fact that the (0001) plane is orthogonal to the exterior surfaces of the plate. The direction of extrusion associated with these planes and common to the three textures is of the type , Dilatometric tests have been carried out on samples taken both parallel and perpendicular to the extrusion direction, These tests show that the zirconium is dilatometrically anisotropic and that a plot of (α v )-a against temperature shows a change of gradient at 400 deg C, this latter effect may be due to the change in the electronic configuration of the metal occurring at this temperature. (author) [fr
Maximizing biomarker discovery by minimizing gene signatures

Directory of Open Access Journals (Sweden)

Chang Chang

2011-12-01

Full Text Available Abstract Background The use of gene signatures can potentially be of considerable value in the field of clinical diagnosis. However, gene signatures defined with different methods can be quite various even when applied the same disease and the same endpoint. Previous studies have shown that the correct selection of subsets of genes from microarray data is key for the accurate classification of disease phenotypes, and a number of methods have been proposed for the purpose. However, these methods refine the subsets by only considering each single feature, and they do not confirm the association between the genes identified in each gene signature and the phenotype of the disease. We proposed an innovative new method termed Minimize Feature's Size (MFS based on multiple level similarity analyses and association between the genes and disease for breast cancer endpoints by comparing classifier models generated from the second phase of MicroArray Quality Control (MAQC-II, trying to develop effective meta-analysis strategies to transform the MAQC-II signatures into a robust and reliable set of biomarker for clinical applications. Results We analyzed the similarity of the multiple gene signatures in an endpoint and between the two endpoints of breast cancer at probe and gene levels, the results indicate that disease-related genes can be preferably selected as the components of gene signature, and that the gene signatures for the two endpoints could be interchangeable. The minimized signatures were built at probe level by using MFS for each endpoint. By applying the approach, we generated a much smaller set of gene signature with the similar predictive power compared with those gene signatures from MAQC-II. Conclusions Our results indicate that gene signatures of both large and small sizes could perform equally well in clinical applications. Besides, consistency and biological significances can be detected among different gene signatures, reflecting the
Statistical Texture Model for mass Detection in Mammography

Directory of Open Access Journals (Sweden)

Nicolás Gallego-Ortiz

2013-12-01

Full Text Available In the context of image processing algorithms for mass detection in mammography, texture is a key feature to be used to distinguish abnormal tissue from normal tissue. Recently, a texture model based on a multivariate Gaussian mixture was proposed, of which the parameters are learned in an unsupervised way from the pixel intensities of images. The model produces images that are probabilistic maps of texture normality and it was proposed as a visualization aid for diagnostic by clinical experts. In this paper, the usability of the model is studied for automatic mass detection. A segmentation strategy is proposed and evaluated using 79 mammography cases.
Second order statistical analysis of US image texture

International Nuclear Information System (INIS)

Tanzi, F.; Novario, R.

1999-01-01

The study reports the sonographic image texture of the neonatal heart in different stages of development by calculating numerical parameters extracted from the gray scale co-occurrence matrix. To show pixel values differences and enhance texture structure, images were equalized and then the gray level range was reduced to 16 to allow sufficiently high occupancy frequency of the co-occurrence matrix. Differences are so little significant that they may be due to different factors affecting image texture and the variability introduced by manual ROI positioning; therefore no definitive conclusions can be drawn as to considering this kind of analysis capable of discriminating different stages of myocardial development [it
DNS of flows over superhydrophobic surfaces with small texture

Science.gov (United States)

Fairhall, Chris; Garcia-Mayoral, Ricardo

2015-11-01

We present results from direct numerical simulations of turbulent flows over superhydrophobic surfaces with small texture sizes, comparable to those of practical application. Textures studied with DNS are usually much larger, as the cost of the simulations would otherwise be prohibitive. For this reason, a multi-block code that allows for finer resolution near the walls has been developed. We focus particularly on the pressure distribution at the wall. This distribution can cause the deformation of the gas pockets, which can ultimately lead to their loss and that of the drag reduction effect. The layout of the texture causes stagnation pressures which can contribute substantially to the wall pressure signal (Seo et al. JFM, under review). We study a range of different textures and their influence on these pressures.
Topotactic preparation of textured alumina ceramics from dehydroxylation of gibbsite films

Energy Technology Data Exchange (ETDEWEB)

Louaer, Seif-Eddine; Wang, Yao, E-mail: yao@buaa.edu.cn; Guo, Lin, E-mail: guolin@buaa.edu.cn

2014-11-14

In this paper, textured alumina ceramics were prepared from dehydroxylation of gibbsite films and the pseudomorphic and topotactic nature of the dehydroxylation of textured gibbsite films has been investigated. First, the precursor film with a (001)-textured structure was obtained via vacuum filtration deposition of diluted aqueous suspensions of gibbsite nanoplatelets. Subsequently, (001)-textured α-alumina ceramics were successfully achieved by sintering of the deposited gibbsite films without addition of α-alumina seeds. The Scanning Electron Microscope (SEM) and X-ray Diffraction (XRD) results show that, during the phase transition from gibbsite to α-alumina, both layered morphology and crystal's axis orientation have been retained to a considerable extent. For the first time, a direct XRD evidence of gibbsite topotactic dehydroxylation to the α-alumina phase is presented. It is believed that the method described here exploits gibbsite's pseudomorphic and topotactic dehydroxylation, not on individual particles scale but on a bulk form. The resulting structure can be considered as inorganic scaffolds which can have applications for fabrication of dense, textured alumina-based ceramics and other layered/textured nanocomposites. - Highlights: • Gibbsite nanoplatelets were assembled on their basal plane to form (001)-textured films. • Textured alumina ceramics were prepared by sintering textured gibbsite films without addition of α-alumina seeds. • Both pseudomorphic and topotactic aspects were exploited in bulk form instead of individual nanoparticulate size. • Direct XRD evidence of the topotactic dehydroxylation from gibbsite to α-alumina is presented in this work.
Topotactic preparation of textured alumina ceramics from dehydroxylation of gibbsite films

International Nuclear Information System (INIS)

Louaer, Seif-Eddine; Wang, Yao; Guo, Lin

2014-01-01

In this paper, textured alumina ceramics were prepared from dehydroxylation of gibbsite films and the pseudomorphic and topotactic nature of the dehydroxylation of textured gibbsite films has been investigated. First, the precursor film with a (001)-textured structure was obtained via vacuum filtration deposition of diluted aqueous suspensions of gibbsite nanoplatelets. Subsequently, (001)-textured α-alumina ceramics were successfully achieved by sintering of the deposited gibbsite films without addition of α-alumina seeds. The Scanning Electron Microscope (SEM) and X-ray Diffraction (XRD) results show that, during the phase transition from gibbsite to α-alumina, both layered morphology and crystal's axis orientation have been retained to a considerable extent. For the first time, a direct XRD evidence of gibbsite topotactic dehydroxylation to the α-alumina phase is presented. It is believed that the method described here exploits gibbsite's pseudomorphic and topotactic dehydroxylation, not on individual particles scale but on a bulk form. The resulting structure can be considered as inorganic scaffolds which can have applications for fabrication of dense, textured alumina-based ceramics and other layered/textured nanocomposites. - Highlights: • Gibbsite nanoplatelets were assembled on their basal plane to form (001)-textured films. • Textured alumina ceramics were prepared by sintering textured gibbsite films without addition of α-alumina seeds. • Both pseudomorphic and topotactic aspects were exploited in bulk form instead of individual nanoparticulate size. • Direct XRD evidence of the topotactic dehydroxylation from gibbsite to α-alumina is presented in this work
Friction behavior of nano-textured polyimide surfaces measured by AFM colloidal probe

Energy Technology Data Exchange (ETDEWEB)

Zhang, Xiaoliang [College of Equipment Manufacturing, Hebei University of Engineering, Handan 056038 (China); State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Wu, Chunxia; Che, Hongwei; Hou, Junxian [College of Equipment Manufacturing, Hebei University of Engineering, Handan 056038 (China); Jia, Junhong, E-mail: jhjia@licp.cas.cn [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China)

2014-11-30

Highlights: • Flat PI film and nano-textured PI film were prepared by spin-coating process. • The nano-textured PI surface has effectively reduced the adhesion and friction. • Friction increased with the increasing of contact area and adhesion. • The growth rate of friction decreased with the increasing of applied load. - Abstract: Flat polyimide (PI) film and silicon dioxide nanoparticle-textured PI film were prepared by means of the spin-coating technique. The adhesion and friction properties of the flat PI surface and nano-textured PI surface were investigated by a series of Atomic force microscope (AFM) colloidal probes. Experimental results revealed that the nano-textured PI surface can significantly reduce the adhesive force and friction force, compared with the flat PI surface. The main reason is that the nano-textures can reduce the contact area between the sample surface and colloidal probe. The effect of colloidal probe size on the friction behavior of the flat and nano-textured PI surfaces was evaluated. The adhesive force and friction force of nano-textured PI surface were increased with the increasing of the size of interacting pairs (AFM colloidal probe) due to the increased contact area. Moreover, the friction forces of flat and nano-textured PI surfaces were increased with applied load and sliding velocity.
A Noise Robust Statistical Texture Model

DEFF Research Database (Denmark)

Hilger, Klaus Baggesen; Stegmann, Mikkel Bille; Larsen, Rasmus

2002-01-01

Appearance Models segmentation framework. This is accomplished by augmenting the model with an estimate of the covariance of the noise present in the training data. This results in a more compact model maximising the signal-to-noise ratio, thus favouring subspaces rich on signal, but low on noise......This paper presents a novel approach to the problem of obtaining a low dimensional representation of texture (pixel intensity) variation present in a training set after alignment using a Generalised Procrustes analysis.We extend the conventional analysis of training textures in the Active...
First steps towards cube textured nickel profile wires for YBCO-coated conductors

International Nuclear Information System (INIS)

Eickemeyer, J.; Gueth, A.; Freudenberger, J.; Holzapfel, B.; Schultz, L.

2011-01-01

The cube texture as a typical sheet texture can also be formed by cold drawing and recrystallization in profile wires. Cube textured Ni profile wires containing up to 96.2% cube oriented grains in the central region were obtained. Forthcoming investigations are promising to get a textured substrate wire for YBCO-coated conductors. Cube textured nickel alloy tapes prepared by cold rolling and annealing (RABiTS method) represent a standard metallic substrate for superconductor coatings of the YBa 2 Cu 3 O 7-δ (YBCO) type. These tapes have a width to thickness ratio of about 30-100. However, a value of close to one is optimal concerning low energetic losses under alternating current applications. First experiments on micro-alloyed nickel prove that the cube texture as a typical sheet texture can also be formed in profile wires with a rectangular cross-section after cold drawing and recrystallization treatment.
Self-Similarity Based Corresponding-Point Extraction from Weakly Textured Stereo Pairs

Directory of Open Access Journals (Sweden)

Min Mao

2014-01-01

Full Text Available For the areas of low textured in image pairs, there is nearly no point that can be detected by traditional methods. The information in these areas will not be extracted by classical interest-point detectors. In this paper, a novel weakly textured point detection method is presented. The points with weakly textured characteristic are detected by the symmetry concept. The proposed approach considers the gray variability of the weakly textured local regions. The detection mechanism can be separated into three steps: region-similarity computation, candidate point searching, and refinement of weakly textured point set. The mechanism of radius scale selection and texture strength conception are used in the second step and the third step, respectively. The matching algorithm based on sparse representation (SRM is used for matching the detected points in different images. The results obtained on image sets with different objects show high robustness of the method to background and intraclass variations as well as to different photometric and geometric transformations; the points detected by this method are also the complement of points detected by classical detectors from the literature. And we also verify the efficacy of SRM by comparing with classical algorithms under the occlusion and corruption situations for matching the weakly textured points. Experiments demonstrate the effectiveness of the proposed weakly textured point detection algorithm.
Texture and inflation in a closed universe

International Nuclear Information System (INIS)

Hacyan, S.; Sarmiento, A.

1993-01-01

We present a cosmological model with a global homogeneous texture and inflation, but without an initial singularity. The Universe starts from an equilibrium configuration in a symmetric vacuum; the dynamic stability of this configuration is studied. We obtain numerical solutions which show that the Universe expands exponentially and the texture field decays in a finite time; this corresponds to a period of inflation followed naturally by a Friedmann expansion
Lattice-Based Revocable Certificateless Signature

Directory of Open Access Journals (Sweden)

Ying-Hao Hung

2017-10-01

Full Text Available Certificateless signatures (CLS are noticeable because they may resolve the key escrow problem in ID-based signatures and break away the management problem regarding certificate in conventional signatures. However, the security of the mostly previous CLS schemes relies on the difficulty of solving discrete logarithm or large integer factorization problems. These two problems would be solved by quantum computers in the future so that the signature schemes based on them will also become insecure. For post-quantum cryptography, lattice-based cryptography is significant due to its efficiency and security. However, no study on addressing the revocation problem in the existing lattice-based CLS schemes is presented. In this paper, we focus on the revocation issue and present the first revocable CLS (RCLS scheme over lattices. Based on the short integer solution (SIS assumption over lattices, the proposed lattice-based RCLS scheme is shown to be existential unforgeability against adaptive chosen message attacks. By performance analysis and comparisons, the proposed lattice-based RCLS scheme is better than the previously proposed lattice-based CLS scheme, in terms of private key size, signature length and the revocation mechanism.

Two-dimensional numerical simulation of boron diffusion for pyramidally textured silicon

International Nuclear Information System (INIS)

Ma, Fa-Jun; Duttagupta, Shubham; Shetty, Kishan Devappa; Meng, Lei; Hoex, Bram; Peters, Ian Marius; Samudra, Ganesh S.

2014-01-01

Multidimensional numerical simulation of boron diffusion is of great relevance for the improvement of industrial n-type crystalline silicon wafer solar cells. However, surface passivation of boron diffused area is typically studied in one dimension on planar lifetime samples. This approach neglects the effects of the solar cell pyramidal texture on the boron doping process and resulting doping profile. In this work, we present a theoretical study using a two-dimensional surface morphology for pyramidally textured samples. The boron diffusivity and segregation coefficient between oxide and silicon in simulation are determined by reproducing measured one-dimensional boron depth profiles prepared using different boron diffusion recipes on planar samples. The established parameters are subsequently used to simulate the boron diffusion process on textured samples. The simulated junction depth is found to agree quantitatively well with electron beam induced current measurements. Finally, chemical passivation on planar and textured samples is compared in device simulation. Particularly, a two-dimensional approach is adopted for textured samples to evaluate chemical passivation. The intrinsic emitter saturation current density, which is only related to Auger and radiative recombination, is also simulated for both planar and textured samples. The differences between planar and textured samples are discussed
Soil texture derived from topography in North-eastern Amazonia

OpenAIRE

Laurent, François; Poccard-Chapuis, René; Plassin, Sophie; Pimentel Martinez, Gustavo

2017-01-01

We present a 1:100,000 scale soil texture map of Paragominas county (Pará, Brazil), covering 19,330 km2. The method allows rapid production of a soil texture map of a large area where the strength of a duricrust controls the relief. It is based on an easily accessible explanatory variable, topography, which is represented using a Digital Elevation Model. The method makes it possible to map the spatial distribution of the texture of the topsoil layer. Modelling was complemented by field observ...
General Conversion for Obtaining Strongly Existentially Unforgeable Signatures

Science.gov (United States)

Teranishi, Isamu; Oyama, Takuro; Ogata, Wakaha

We say that a signature scheme is strongly existentially unforgeable (SEU) if no adversary, given message/signature pairs adaptively, can generate a signature on a new message or a new signature on a previously signed message. We propose a general and efficient conversion in the standard model that transforms a secure signature scheme to SEU signature scheme. In order to construct that conversion, we use a chameleon commitment scheme. Here a chameleon commitment scheme is a variant of commitment scheme such that one can change the committed value after publishing the commitment if one knows the secret key. We define the chosen message security notion for the chameleon commitment scheme, and show that the signature scheme transformed by our proposed conversion satisfies the SEU property if the chameleon commitment scheme is chosen message secure. By modifying the proposed conversion, we also give a general and efficient conversion in the random oracle model, that transforms a secure signature scheme into a SEU signature scheme. This second conversion also uses a chameleon commitment scheme but only requires the key only attack security for it.
Hardwood species classification with DWT based hybrid texture ...

Indian Academy of Sciences (India)

to decompose the image up to 7 levels using Daubechies (db3) wavelet as decom ... binary pattern (DWTFOSLBPu2) texture features at the 4th level of image decomposi ...... In addition, inclusion of further levels of image decomposition gives rise to ..... Texture analysis of SAR sea ice imagery using gray level co-occurrence.
Mechanisms of texture evolution during annealing of Zr and Ti alloys

International Nuclear Information System (INIS)

Gerspacher, F.

2007-12-01

Zirconium and Titanium are hexagonal metals. Thus, they have a weaker symmetry than cubic metals, and a stronger crystalline anisotropy. Despite this strong anisotropy, the fundamental mechanisms of the texture evolution of these metals have not been deeply investigated yet. We studied here the texture and microstructure evolution during annealing after several conditions of deformation, and showed that: - slow texture change is expected in grain growth after severe rolling, because of oriented growth - rapid texture change after low reductions is due to oriented nucleation - transverse rolling gives rise to a correlation between orientation and stored energy in the deformed material, which also induces fast texture changes. These mechanisms have been explained on the basis of microstructure specificities. In addition, texture evolution during normal grain growth was studied and the use of modeling allowed to confirm some hypotheses made on boundary mobility anisotropy. The mechanisms of appearance of abnormal grain growth have also been clarified. (author)
PREFACE: 17th International Conference on Textures of Materials (ICOTOM 17)

Science.gov (United States)

Skrotzki, Werner; Oertel, Carl-Georg

2015-04-01

The 17th International Conference on Textures of Materials (ICOTOM 17) took place in Dresden, Germany, August 24-29, 2014. It belongs to the "triennial" series of ICOTOM meetings with a long tradition, starting in 1969 - Clausthal, 1971 - Cracow, 1973 - Pont-à-Mousson, 1975 - Cambridge, 1978 - Aachen, 1981 - Tokyo, 1984 - Noordwijkerhout, 1987 - Santa Fe, 1990 - Avignon, 1993 - Clausthal, 1996 - Xian, 1999 - Montreal, 2002 - Seoul, 2005 - Leuven, 2008 - Pittsburgh, 2011 - Mumbai, 2014 - Dresden. ICOTOM 17 was hosted by the Dresden University of Technology, Institute of Structural Physics. Following the tradition of the ICOTOM conferences, the main focus of ICOTOM-17 was to promote and strengthen the fundamental understanding of the basic processes that govern the formation of texture and its relation to the properties of polycrystalline materials. Nonetheless, it was the aim to forge links between basic research on model materials and applied research on engineering materials of technical importance. Thus, ICOTOM 17 provided a forum for the presentation and discussion of recent progress in research of texture and related anisotropy of mechanical and functional properties of all kinds of polycrystalline materials including natural materials like rocks. Particular attention was paid to recent advances in texture measurement and analysis as well as modeling of texture development for all kinds of processes like solidification, plastic deformation, recrystallization and grain growth, phase transformations, thin film deposition, etc. Hence, ICOTOM 17 was of great interest to materials scientists, engineers from many different areas and geoscientists. The topics covered by ICOTOM 17 were: 1. Mathematical, numerical and statistical methods of texture analysis 2. Deformation textures 3. Crystallization, recrystallization and growth textures 4. Transformation textures 5. Textures in functional materials 6. Textures in advanced materials 7. Textures in rocks 8. Texture
Radar micro-doppler signatures processing and applications

CERN Document Server

Chen, Victor C; Miceli, William J

2014-01-01

Radar Micro-Doppler Signatures: Processing and applications concentrates on the processing and application of radar micro-Doppler signatures in real world situations, providing readers with a good working knowledge on a variety of applications of radar micro-Doppler signatures.
Textured ZnO thin films by RF magnetron sputtering

CERN Document Server

Ginting, M; Kang, K H; Kim, S K; Yoon, K H; Park, I J; Song, J S

1999-01-01

Textured thin films ZnO has been successfully grown by rf magnetron sputtering method using a special technique of introducing a small amount of water and methanol on the deposition chamber. The grain size of the textured surface is highly dependent on the argon pressure during the deposition. The pressure in this experiment was varied from 50 mTorr down to 5 mTorr and the highest grain size of the film is obtained at 5 mTorr. The total transmittance of the films are more than 85% in the wavelength of 400 to 800 nm, and haze ratio of about 14% is obtained at 400 nm wavelength. Beside the textured surface, these films also have very low resistivity, which is lower than 1.4x10 sup - sup 3 OMEGA centre dot cm. X-ray analysis shows that the films with textured surface have four diffraction peaks on the direction of (110), (002), (101) and (112), while the non-textured films have only (110) and (002) peaks. Due to the excellent characteristics of this film, it will make the film very good TCO alternatives for the ...
Control of texture in Ag and Ag-alloy substrates for superconducting tapes

International Nuclear Information System (INIS)

Gladstone, T.A.

2000-01-01

The use of a biaxially textured silver tape as a substrate for high temperature superconductor (HTS) phases is one possible route towards the fabrication of high-J c superconducting tape. Using a cold-rolling and annealing process we have reproducibly fabricated {110} textured silver which is stable up to 900 deg. C. We have found that there are two critical process requirements for the formation of this texture; a low oxygen content in the material prior to deformation, and a cold-rolling thickness reduction of less than 97%. To overcome the problems associated with the poor mechanical strength of pure silver, texture development in Ag-Mg and Ag-Hf alloys with improved mechanical properties has been studied. Heat treatments in a reducing atmosphere allow the {110} annealing texture to be obtained in Ag-0.1 wt%Mg. The recrystallization behaviour of a Ag-Pd alloy with an increased stacking fault energy was also investigated and a partial cube texture was obtained in this material. Using orientation distribution function (ODF) analysis we have shown that minor variations in the deformation texture of both pure silver and Ag-based alloys can lead to significant differences in the recrystallization textures obtained. (author)
Microstructure and local texture of partially recrystallized titanium sheet

International Nuclear Information System (INIS)

Zaefferer, S.; Schwarzer, R.A.

1993-01-01

The microstructure of TiAl6V4 sheet was investigated by transmission electron microscopy. Two types of microstructure were found: regions with a recrystallized and regions with a deformed structure. They could be distinguished from each other by grain size and shape, by the dislocation density and local texture. The orientations of individual grains were measured by on-line interpretation of Kikuchi patterns with a TEM. The results were represented on inverse pole figures. The deformed structure showed a strong preferred orientation (11 anti 20)[10 anti 10], while the texture of the recrystallized areas was substantially weaker containing other preferred orientations. The global texture of the sample was investigated by measuring pole figures with an x-ray texture goniometer. The ODF as well as inverse pole figures were calculated and compared to the TEM pole figures. (orig.)
Chameleons: Reptilian Texture

Science.gov (United States)

Petersen, Hugh

2009-01-01

This article presents an art project inspired by a drawing of a chameleon the author saw in an art-supply catalog. Chameleons prove to be a good subject to highlight shape, color and texture with eigth-graders. In this project, middle- and high-school students draw a chameleon, learn how to use shapes to add to their chameleon drawing, learn how…
Extrusion Cooking Systems and Textured Vegetable Proteins

Directory of Open Access Journals (Sweden)

2015-02-01

Full Text Available Many fabricated foods are cooked industrially and are given desired textures, shapes, density and rehydration characteristics by an extrusion cooking process. This relatively new process is used in the preparation of “engineered” convenience foods: textured vegetable proteins, breakfast cereals, snacks, infant foods, dry soup mixes, breading, poultry stuffing, croutons, pasta products, beverage powders, hot breakfast gruels, and in the gelatinization of starch or the starchy component of foods.
Measurement of food texture by an acoustic vibration method

Science.gov (United States)

Sakurai, Naoki; Taniwaki, Mitsuru; Iwatani, Shin-ichiro; Akimoto, Hidemi

2011-09-01

Food texture was measured by a new acoustic vibration method. A piezoelectric sensor sandwiched between a probe and piston was inserted into a food sample by delivery of silicon oil to a cylinder by a pump. Vibration emitted from the food sample on insertion of the probe was monitored by voltage outputs of the sensor. The voltage signals were passed through 19 half octave bands to calculate texture index for each band. The texture index was defined as vibration energy of the probe caused by the food rupture and/or breakage per unit time.
Improving texture optimization with application to visualizing meat products

DEFF Research Database (Denmark)

Clemmensen, Line Katrine Harder; Laursen, Lasse Farnung

2011-01-01

When inspecting food quality, CT Scanning is among the primary tools used to gain insight. It provides valuable volumetric data using a process, which leaves the product unspoiled and untouched. However, volumetric data is merely a measure of density and therefore contains no appearance information...... et al. in 2007. This method accepts a number of 2D input exemplars, from which it generates a solid texture volume. The volume is iteratively improved via an expectation maximization algorithm. The bottleneck of Texture Optimization occurs during a nearest neighbor search, between texture patches...
Bidirectional Texture Function Modeling: State of the Art Survey

Czech Academy of Sciences Publication Activity Database

Filip, Jiří; Haindl, Michal

2009-01-01

Roč. 31, č. 11 (2009), s. 1921-1940 ISSN 0162-8828 R&D Projects: GA MŠk 1M0572; GA ČR GA102/08/0593; GA AV ČR 1ET400750407 Grant - others:EC Marie Curie(BE) 41358; GA MŠk(CZ) 2C06019 Institutional research plan: CEZ:AV0Z10750506 Keywords : BTF * surface texture * 3D texture Subject RIV: BD - Theory of Information Impact factor: 4.378, year: 2009 http://library.utia.cas.cz/separaty/2009/RO/filip-bidirectional texture function modeling state of the art survey.pdf
Cold rolling texture development of α/γ duplex stainless steels

International Nuclear Information System (INIS)

Akdut, N.; Foct, J.; Gottstein, G.

1996-01-01

The cold rolling texture development of two α/γ duplex stainless steels (DSS) with similar volume fractions of both phases but with totally different microstructures were investigated. Due to the limited number of available pole figures using X-rays, for the calculation of the ODFs both a direct method and a recent iterative series expansion method were used. The results were checked by neutron diffraction measurements. The austenitic phases of both DSS behave similarly to single phase materials with a low stacking fault energy which develop a brass-type rolling texture. In contrast, the texture development of the ferritic phases strongly differs from those of single phase ferrites. Instead of a fibre type texture the α-phase in both DSS exhibits a peak dominated texture regardless of whether it is the matrix phase or not. These differences, as well as the sharpness of both phases, are explained by the presence of the second phase. (orig.)
Silicon epitaxy on textured double layer porous silicon by LPCVD

International Nuclear Information System (INIS)

Cai Hong; Shen Honglie; Zhang Lei; Huang Haibin; Lu Linfeng; Tang Zhengxia; Shen Jiancang

2010-01-01

Epitaxial silicon thin film on textured double layer porous silicon (DLPS) was demonstrated. The textured DLPS was formed by electrochemical etching using two different current densities on the silicon wafer that are randomly textured with upright pyramids. Silicon thin films were then grown on the annealed DLPS, using low-pressure chemical vapor deposition (LPCVD). The reflectance of the DLPS and the grown silicon thin films were studied by a spectrophotometer. The crystallinity and topography of the grown silicon thin films were studied by Raman spectroscopy and SEM. The reflectance results show that the reflectance of the silicon wafer decreases from 24.7% to 11.7% after texturing, and after the deposition of silicon thin film the surface reflectance is about 13.8%. SEM images show that the epitaxial silicon film on textured DLPS exhibits random pyramids. The Raman spectrum peaks near 521 cm -1 have a width of 7.8 cm -1 , which reveals the high crystalline quality of the silicon epitaxy.
Comparison of features response in texture-based iris segmentation

CSIR Research Space (South Africa)

Bachoo, A

2009-03-01

Full Text Available the Fisher linear discriminant and the iris region of interest is extracted. Four texture description methods are compared for segmenting iris texture using a region based pattern classification approach: Grey Level Co-occurrence Matrix (GLCM), Discrete...
Texture development in Al-Mg alloys during high temperature annealing

International Nuclear Information System (INIS)

Saitou, T.; Inagaki, H.

2001-01-01

To clarify the effect of Mg content on annealing textures developed in Al-Mg alloys during high temperature annealing, Al-Mg alloys containing up to 9 wt.% Mg in supersaturated solid solution were cold rolled 95% and isothermally annealed at 450 C. Their textures were investigated with the orientation distribution function analysis. It was found that, in the recrystallization textures observed at complete recrystallization, addition of more than 1 wt.% Mg was sufficient to suppress the development of {100} left angle 001 right angle. With increasing Mg content, {100} left angle 001 right angle decreased remarkably, whereas {100} left angle 013 right angle and {103} left angle 321 right angle increased. Thus, {100} left angle 013 right angle and {103} left angle 321 right angle were found to be the main orientations of the recrystallization textures of Al-Mg alloys annealed at high temperatures. {100} left angle 013 right angle developed most remarkably at 4 wt.% Mg, while {103} left angle 321 right angle showed the maximum development at 7 wt.% Mg. During subsequent grain growth at 450 C, remarkable texture changes were observed only in the alloys containing Mg in the range between 2 and 4 wt.%. In these alloys, {100} left angle 013 right angle developed at the expense of {100} left angle 001 right angle at earlier stages of grain growth, whereas {103} left angle 321 right angle increased independently of these two orientations at later stages of grain growth. Reflecting these texture changes, grain growth occurred in these alloys discontinuously. Such a discontinuous grain growth with large texture changes is expected, if strong textures are already present before grain growth, and if recrystallized grains having similar orientations are distributed by forming large clusters before grain growth. (orig.)
Physics Signatures at CLIC

CERN Document Server

Battaglia, Marco

2001-01-01

A set of signatures for physics processes of potential interests for the CLIC programme at = 1 - 5 TeV are discussed. These signatures, that may correspond to the manifestation of different scenarios of new physics as well as to Standard Model precision tests, are proposed as benchmarks for the optimisation of the CLIC accelerator parameters and for a first definition of the required detector response.

Texture and microstructure analysis of epitaxial oxide layers prepared on textured Ni-12wt%Cr tapes

Energy Technology Data Exchange (ETDEWEB)

Huehne, R; Kursumovic, A; Tomov, R I; Glowacki, B A [Department of Materials Science and IRC in Superconductivity, University of Cambridge, Pembroke Street, Cambridge, CB2 3QZ (United Kingdom); Holzapfel, B [Institut fuer Festkoerper- und Werkstoffforschung, Helmholtzstrasse 20, 01069 Dresden (Germany); Evetts, J E [Department of Materials Science and IRC in Superconductivity, University of Cambridge, Pembroke Street, Cambridge, CB2 3QZ (United Kingdom)

2003-05-07

Oxide layers for the preparation of YBa{sub 2}Cu{sub 3}O{sub 7-x} coated conductors were grown on highly textured Ni-12wt%Cr tapes in pure oxygen using surface oxidation epitaxy at temperatures between 1000 deg. C and 1300 deg. C. Microstructural investigations revealed a layered oxide structure. The upper layer consists mainly of dense cube textured NiO. This is followed by a porous layer containing NiO and NiCr{sub 2}O{sub 4} particles. A detailed texture analysis showed a cube-on-cube relationship of the NiCr{sub 2}O{sub 4} spinel to the metal substrate. Untextured Cr{sub 2}O{sub 3} particles in a nickel matrix were found in a third layer arising from internal oxidation of the alloy. A high surface roughness and mechanical instability of the oxide were observed, depending on oxidation temperature and film thickness. However, mechanically stable oxide layers have been prepared using an additional annealing step in a protective atmosphere. Additionally, mechanical polishing or a second buffer layer, which grows with a higher smoothness, may be applied to reduce the surface roughness for coated conductor applications.
Stone -Cech compactifications of ditopological texture spaces | Ugur ...

African Journals Online (AJOL)

A texturing on a set S is a point separating, complete, completely distributive lattice S of subsets of S with respect to inclusion which contains S, Ø and for which arbitrary meet coincides with intersection and finite joins coincide with union. Then (S, S) is called a texture space. In this paper, a suitable evaluation difunction is ...
Genome signature analysis of thermal virus metagenomes reveals Archaea and thermophilic signatures

Directory of Open Access Journals (Sweden)

Pride David T

2008-09-01

Full Text Available Abstract Background Metagenomic analysis provides a rich source of biological information for otherwise intractable viral communities. However, study of viral metagenomes has been hampered by its nearly complete reliance on BLAST algorithms for identification of DNA sequences. We sought to develop algorithms for examination of viral metagenomes to identify the origin of sequences independent of BLAST algorithms. We chose viral metagenomes obtained from two hot springs, Bear Paw and Octopus, in Yellowstone National Park, as they represent simple microbial populations where comparatively large contigs were obtained. Thermal spring metagenomes have high proportions of sequences without significant Genbank homology, which has hampered identification of viruses and their linkage with hosts. To analyze each metagenome, we developed a method to classify DNA fragments using genome signature-based phylogenetic classification (GSPC, where metagenomic fragments are compared to a database of oligonucleotide signatures for all previously sequenced Bacteria, Archaea, and viruses. Results From both Bear Paw and Octopus hot springs, each assembled contig had more similarity to other metagenome contigs than to any sequenced microbial genome based on GSPC analysis, suggesting a genome signature common to each of these extreme environments. While viral metagenomes from Bear Paw and Octopus share some similarity, the genome signatures from each locale are largely unique. GSPC using a microbial database predicts most of the Octopus metagenome has archaeal signatures, while bacterial signatures predominate in Bear Paw; a finding consistent with those of Genbank BLAST. When using a viral database, the majority of the Octopus metagenome is predicted to belong to archaeal virus Families Globuloviridae and Fuselloviridae, while none of the Bear Paw metagenome is predicted to belong to archaeal viruses. As expected, when microbial and viral databases are combined, each of
48 CFR 204.101 - Contracting officer's signature.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Contracting officer's signature. 204.101 Section 204.101 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS... officer's signature. Follow the procedures at PGI 204.101 for signature of contract documents. [71 FR 9268...
Field-Induced Texturing of Ceramic Materials for Unparalleled Properties

Science.gov (United States)

2017-03-01

Texturing of Ceramic Materials for Unparalleled Properties by...influence over many properties , such as optical transparency, strength, electrical conductivity, and piezoelectricity .19 Highly textured materials are... Ceramic Materials for Unparalleled Properties by Raymond Brennan, Victoria Blair, Nicholas Ku, Krista Limmer, Tanya Chantawansri, Mahesh
Texturing of continuous LOD meshes with the hierarchical texture atlas

Science.gov (United States)

Birkholz, Hermann

2006-02-01

For the rendering of detailed virtual environments, trade-offs have to be made between image quality and rendering time. An immersive experience of virtual reality always demands high frame-rates with the best reachable image qual-ity. Continuous Level of Detail (cLoD) triangle-meshes provide an continuous spectrum of detail for a triangle mesh that can be used to create view-dependent approximations of the environment in real-time. This enables the rendering with a constant number of triangles and thus with constant frame-rates. Normally the construction of such cLoD mesh representations leads to the loss of all texture information of the original mesh. To overcome this problem, a parameter domain can be created, in order to map the surface properties (colour, texture, normal) to it. This parameter domain can be used to map the surface properties back to arbitrary approximations of the original mesh. The parameter domain is often a simplified version of the mesh to be parameterised. This limits the reachable simplification to the domain mesh which has to map the surface of the original mesh with the least possible stretch. In this paper, a hierarchical domain mesh is presented, that scales between very coarse domain meshes and good property-mapping.
Can specific transcriptional regulators assemble a universal cancer signature?

Science.gov (United States)

Roy, Janine; Isik, Zerrin; Pilarsky, Christian; Schroeder, Michael

2013-10-01

Recently, there is a lot of interest in using biomarker signatures derived from gene expression data to predict cancer progression. We assembled signatures of 25 published datasets covering 13 types of cancers. How do these signatures compare with each other? On one hand signatures answering the same biological question should overlap, whereas signatures predicting different cancer types should differ. On the other hand, there could also be a Universal Cancer Signature that is predictive independently of the cancer type. Initially, we generate signatures for all datasets using classical approaches such as t-test and fold change and then, we explore signatures resulting from a network-based method, that applies the random surfer model of Google's PageRank algorithm. We show that the signatures as published by the authors and the signatures generated with classical methods do not overlap - not even for the same cancer type - whereas the network-based signatures strongly overlap. Selecting 10 out of 37 universal cancer genes gives the optimal prediction for all cancers thus taking a first step towards a Universal Cancer Signature. We furthermore analyze and discuss the involved genes in terms of the Hallmarks of cancer and in particular single out SP1, JUN/FOS and NFKB1 and examine their specific role in cancer progression.
Characterization and properties of batch-processed melt-textured YBCO

Energy Technology Data Exchange (ETDEWEB)

Kaiser, A.W.; Adam, M.; Bornemann, H.J. [INFP, Forschungszentrum Karlsruhe GmbH, PO Box 3640, 76021 Karlsruhe (Germany)

1998-01-01

High-temperature superconductor bulk parts are batch processed using a semi-automated processing technique based on the melt-texturation process. Levitation properties under static and dynamic load levels were analysed using a test bench with a three-dimensional force sensor unit. Measurements of levitation force give no detailed suggestions on texture, secondary domains or cracks. Therefore other measurements to control homogeneity of the bulk were performed. Texture on full-size pellets (FWHM < 5 deg., {delta}{sub {chi}} < 3 deg.) was verified by elastic neutron scattering. To study the influence of local texture on properties a pellet was divided into nine segments. Preliminary results indicate that a correlation between neutron data and levitation force needs further investigations. Flux maps of samples magnetized by permanent magnets or by a pulsed magnetization unit were used to verify the homogeneity and domain structure of the material and to evaluate macroscopic critical currents. (author)
ROLLING PROCESS WITH OHSAS AND TEXTURE FORMATION– A REVIEW

Directory of Open Access Journals (Sweden)

P. CHANDRAMOHAN

2009-03-01

Full Text Available Rolling is a mechanical treatment, which plays an important part in the processing of ferrous and nonferrous alloys. Texturing is an important phenomenon that occurs after rolling process. Preferred orientation increases the strength of the material enormously. Hence the research is focused on the rolling studies and the texture formation, which occurs after rolling process. This review mainly focuses on rolling process carried out in different alloys. It also highlights the analysis made on various rolling parameters for improving the mechanical properties. Texture studies carried on various ferrous and non-ferrous alloys; particularly in nitrogen alloyed duplex stainless steel is discussed. Finally the need for implementation of occupational health and safety during a thermomechanical treatment is also discussed. The state of art in this field is encouraging and showing positive signs of commercializing rolled nitrogen alloyed duplex stainless steel after proper texture control.
Spin Transport in Ferromagnetic and Antiferromagnetic Textures

KAUST Repository

Akosa, Collins A.

2016-12-07

In this dissertation, we provide an accurate description of spin transport in magnetic textures and in particular, we investigate in detail, the nature of spin torque and magnetic damping in such systems. Indeed, as will be further discussed in this thesis, the current-driven velocity of magnetic textures is related to the ratio between the so-called non-adiabatic torque and magnetic damping. Uncovering the physics underlying these phenomena can lead to the optimal design of magnetic systems with improved efficiency. We identified three interesting classes of systems which have attracted enormous research interest (i) Magnetic textures in systems with broken inversion symmetry: We investigate the nature of magnetic damping in non-centrosymmetric ferromagnets. Based on phenomenological and microscopic derivations, we show that the magnetic damping becomes chiral, i.e. depends on the chirality of the magnetic texture. (ii) Ferromagnetic domain walls, skyrmions and vortices: We address the physics of spin transport in sharp disordered magnetic domain walls and vortex cores. We demonstrate that upon spin-independent scattering, the non-adiabatic torque can be significantly enhanced. Such an enhancement is large for vortex cores compared to transverse domain walls. We also show that the topological spin currents owing in these structures dramatically enhances the non-adiabaticity, an effect unique to non-trivial topological textures (iii) Antiferromagnetic skyrmions: We extend this study to antiferromagnetic skyrmions and show that such an enhanced topological torque also exist in these systems. Even more interestingly, while such a non-adiabatic torque inuences the undesirable transverse velocity of ferromagnetic skyrmions, in antiferromagnetic skyrmions, the topological non-adiabatic torque directly determines the longitudinal velocity. As a consequence, scaling down the antiferromagnetic skyrmion results in a much more efficient spin torque.
36 CFR 1150.22 - Signature of documents.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Signature of documents. 1150.22 Section 1150.22 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS... Documents for Proceedings on Citations § 1150.22 Signature of documents. The signature of a party...
Influence of the matrix texture on the fracture behavior of 2D carbon/carbon composites

International Nuclear Information System (INIS)

Xu Guozhong; Li Hejun; Bai Ruicheng; Wei Jian; Zha, Yanqiang

2008-01-01

The influence of matrix texture on the fracture behavior of 2D carbon/carbon composites infiltrated by isobaric, isothermal CVI technique at ambient pressure was investigated. The flexural strength of the as-obtained samples has been studied using a three-point bending test. After flexural test, the texture of pyrocarbon on the fracture surface and the morphology of the fracture surface were observed by polarized light microscopy and scanning electron microscopy, respectively. The results show that the sample with pure medium-textured pyrocarbon exhibits typical brittle fracture behavior due to no sliding between sub-layers in the medium-textured pyrocarbon layer. However, both the sample with the three-layer structure of medium-textured pyrocarbon, high-textured pyrocarbon and low-textured pyrocarbon, and the sample with the double-layer structure of medium-textured pyrocarbon and high-textured pyrocarbon exhibit remarkable pseudo-plastic fracture behavior, which is caused by the sliding occurred between different textured pyrocarbon layers and between sub-layers in high-textured pyrocarbon layer
Pure Surface Texture Mapping Technology and it's Application for Mirror Image

Directory of Open Access Journals (Sweden)

Wei Feng Wang

2013-02-01

Full Text Available Based on the study of pure surface texture mapping technology, pure texture surface rendering method is proposed. The method is combined pure surface texture rendering and view mirror, real-time rendering has an index of refraction, reflection, and the flow of water ripple effect. Through the experimental verification of the validity of the algorithm.
Microstructure, crystallographic texture and mechanical properties of friction stir welded AA2017A

Energy Technology Data Exchange (ETDEWEB)

Ahmed, M.M.Z., E-mail: mohamed_ahmed4@s-petrol.suez.edu.eg [Institute for Microstructural and Mechanical Processing Engineering, University of Sheffield (IMMPETUS), Mappin Street, Sheffield S1 3JD (United Kingdom); Department of Metallurgical and Materials Engineering, Suez Canal University, Suez 43721 (Egypt); Wynne, B.P.; Rainforth, W.M. [Institute for Microstructural and Mechanical Processing Engineering, University of Sheffield (IMMPETUS), Mappin Street, Sheffield S1 3JD (United Kingdom); Threadgill, P.L. [TWI LTD, Granta Park, Great Abington, Cambridge CB21 6AL (United Kingdom)

2012-02-15

In this study a thick section (20 mm) friction stir welded AA2017A-T451 has been characterized in terms of microstructure, crystallographic texture and mechanical properties. For microstructural analysis both optical and scanning electron microscopes have been used. A detailed crystallographic texture analysis has been carried out using the electron back scattering diffraction technique. Crystallographic texture has been examined in both shoulder and probe affected regions of the weld NG. An entirely weak texture is observed at the shoulder affected region which is mainly explained by the effect of the sequential multi pass deformation experienced by both tool probe and tool shoulder. The texture in the probe dominated region at the AS side of the weld is relatively weak but still assembles the simple shear texture of FCC metals with B/B{sup Macron} and C components existing across the whole map. However, the texture is stronger at the RS than at the AS of the weld, mainly dominated byB/B{sup Macron} components and with C component almost absent across the map. An alternating bands between (B) components and (B{sup Macron }) component are observed only at the AS side of the weld. - Highlights: Black-Right-Pointing-Pointer Detailed investigation of microstructure and crystallographic texture. Black-Right-Pointing-Pointer The grain size is varied from the top to the bottom of the NG. Black-Right-Pointing-Pointer An entirely weak texture is observed at the shoulder affected region. Black-Right-Pointing-Pointer The texture in the probe affected region is dominated by simple shear texture.
17 CFR 201.65 - Identity and signature.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Identity and signature. 201.65... of 1934 § 201.65 Identity and signature. Applications pursuant to this subpart may omit the identity, mailing address, and signature of the applicant; provided, that such identity, mailing address and...
Improvement in the textural qualities of irradiated legumes

International Nuclear Information System (INIS)

Nene, S.P.; Vakil, U.K.; Sreenivasan, A.

1975-01-01

The potential for use of gamma radiation processing to improve texture, hydration and cooking quality of pulses, particularly red gram, has been examined. The textural changes in irradiated pulses in terms of softening is measured by a texturometer, Radiation (1 Mrad) processing of pulses resulted in reduction of cooking time varying from 8 to 39%, red gram showing the maximum reduction. Initial higher hydration rate on soaking and cooking, stabilized on prolonged cooking and resulted in better and uniform texture of irradiated red gram. In the uncooked, irradiated (1 Mrad) sample, destruction of riboflavin was negligible, whereas thiamine and niacin showed about 7% loss. However, the vitamins were retained better in the samples irradiated and then cooked, compared to the corresponding control ones. (F.J.)
Stato dell’arte nella sintesi di texture sonore

Directory of Open Access Journals (Sweden)

Diemo Schwarz

2016-06-01

Full Text Available The synthesis of sound textures, such as rain, wind, or crowds, is an important application for cinema, multimedia creation, games and installations. However, despite the clearly defined requirements of naturalness and flexibility, no automatic method has yet found widespread use. After clarifying the definition, terminology, and usages of sound texture synthesis, we will give an overview of the many existing methods and approaches, and the few available software implementations, and classify them by the synthesis model they are based on, such as subtractive or additive synthesis, granular synthesis, corpus-based concatenative synthesis, wavelets, or physical modeling. Additionally, an overview is given over analysis methods used for sound texture synthesis, such as segmentation, statistical modeling, timbral analysis, and modeling of transitions.
POOR TEXTURAL IMAGE MATCHING BASED ON GRAPH THEORY

Directory of Open Access Journals (Sweden)

S. Chen

2016-06-01

Full Text Available Image matching lies at the heart of photogrammetry and computer vision. For poor textural images, the matching result is affected by low contrast, repetitive patterns, discontinuity or occlusion, few or homogeneous textures. Recently, graph matching became popular for its integration of geometric and radiometric information. Focused on poor textural image matching problem, it is proposed an edge-weight strategy to improve graph matching algorithm. A series of experiments have been conducted including 4 typical landscapes: Forest, desert, farmland, and urban areas. And it is experimentally found that our new algorithm achieves better performance. Compared to SIFT, doubled corresponding points were acquired, and the overall recall rate reached up to 68%, which verifies the feasibility and effectiveness of the algorithm.
Improvement in the textural qualities of irradiated legumes

Energy Technology Data Exchange (ETDEWEB)

Nene, S P; Vakil, U K; Sreenivasan, A [Bhabha Atomic Research Centre, Bombay (India). Biochemistry and Food Technology Div.

1975-01-01

The potential for use of gamma radiation processing to improve texture, hydration and cooking quality of pulses, particularly red gram, has been examined. The textural changes in irradiated pulses in terms of softening is measured by a texturometer, Radiation (1 Mrad) processing of pulses resulted in reduction of cooking time varying from 8 to 39%, red gram showing the maximum reduction. Initial higher hydration rate on soaking and cooking, stabilized on prolonged cooking and resulted in better and uniform texture of irradiated red gram. In the uncooked, irradiated (1 Mrad) sample, destruction of riboflavin was negligible, whereas thiamine and niacin showed about 7% loss. However, the vitamins were retained better in the samples irradiated and then cooked, compared to the corresponding control ones.
15 CFR 908.16 - Signature.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Signature. 908.16 Section 908.16 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) NATIONAL OCEANIC... SUBMITTING REPORTS ON WEATHER MODIFICATION ACTIVITIES § 908.16 Signature. All reports filed with the National...

Three-State Locally Adaptive Texture Preserving Filter for Radar and Optical Image Processing

Directory of Open Access Journals (Sweden)

Jaakko T. Astola

2005-05-01

Full Text Available Textural features are one of the most important types of useful information contained in images. In practice, these features are commonly masked by noise. Relatively little attention has been paid to texture preserving properties of noise attenuation methods. This stimulates solving the following tasks: (1 to analyze the texture preservation properties of various filters; and (2 to design image processing methods capable to preserve texture features well and to effectively reduce noise. This paper deals with examining texture feature preserving properties of different filters. The study is performed for a set of texture samples and different noise variances. The locally adaptive three-state schemes are proposed for which texture is considered as a particular class. For Ã¢Â€ÂœdetectionÃ¢Â€Â of texture regions, several classifiers are proposed and analyzed. As shown, an appropriate trade-off of the designed filter properties is provided. This is demonstrated quantitatively for artificial test images and is confirmed visually for real-life images.
34 CFR 101.32 - Signature of documents.

Science.gov (United States)

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Signature of documents. 101.32 Section 101.32 Education Regulations of the Offices of the Department of Education OFFICE FOR CIVIL RIGHTS, DEPARTMENT OF EDUCATION... Documents § 101.32 Signature of documents. The signature of a party, authorized officer, employee or...
29 CFR 102.116 - Signature of orders.

Science.gov (United States)

2010-07-01

... 29 Labor 2 2010-07-01 2010-07-01 false Signature of orders. 102.116 Section 102.116 Labor Regulations Relating to Labor NATIONAL LABOR RELATIONS BOARD RULES AND REGULATIONS, SERIES 8 Certification and Signature of Documents § 102.116 Signature of orders. The executive secretary or the associate executive...
On signature change in p-adic space-times

International Nuclear Information System (INIS)

Dragovic, B.G.

1991-01-01

Change of signature by linear coordinate transformations in p-adic space-times is considered. In this paper it is shown that there exists arbitrary change of trivial signature in Q p n for all n ≥ 1 if p ≡ 1 (mod 4). In other cases it is possible to change only even number of the signs of the signature. The authors suggest new concept of signature with respect to distinct quadratic extensions, of Q p . If space-time dimension is restricted to four there is no signature change
Occurrence of 'super soft' wheat kernel texture in hexaploid and tetraploid wheats

Science.gov (United States)

Wheat kernel texture is a key trait that governs milling performance, flour starch damage, flour particle size, flour hydration properties, and baking quality. Kernel texture is commonly measured using the Perten Single Kernel Characterization System (SKCS). The SKCS returns texture values (Hardness...
Quantitative comparison between simulated and experimental FCC rolling textures

DEFF Research Database (Denmark)

Wronski, M.; Wierzbanowski, K.; Leffers, Torben

2015-01-01

The degree of similarity between simulated and experimental fcc rolling textures is characterized by a single scalar parameter. The textures are simulated with a relatively simple and efficient 1-point model which allows us to vary the strength of the interaction between the grains and the surrou...
Optimizing Pt/TiO2 templates for textured PZT growth and MEMS devices

Science.gov (United States)

Potrepka, Daniel; Fox, Glenn; Sanchez, Luz; Polcawich, Ronald

2013-03-01

Crystallographic texture of lead zirconate titanate (PZT) thin films strongly influences piezoelectric properties used in MEMS applications. Textured growth can be achieved by relying on crystal growth habit and can also be initiated by the use of a seed-layer heteroepitaxial template. Template choice and the process used to form it determine structural quality, ultimately influencing performance and reliability of MEMS PZT devices such as switches, filters, and actuators. This study focuses on how 111-textured PZT is generated by a combination of crystal habit and templating mechanisms that occur in the PZT/bottom-electrode stack. The sequence begins with 0001-textured Ti deposited on thermally grown SiO2 on a Si wafer. The Ti is converted to 100-textured TiO2 (rutile) through thermal oxidation. Then 111-textured Pt can be grown to act as a template for 111-textured PZT. Ti and Pt are deposited by DC magnetron sputtering. TiO2 and Pt film textures and structure were optimized by variation of sputtering deposition times, temperatures and power levels, and post-deposition anneal conditions. The relationship between Ti, TiO2, and Pt texture and their impact on PZT growth will be presented. Also affiliated with U.S. Army Research Lab, Adelphi, MD 20783, USA
Possible influences on textures in unalloyed steels and their effects on steel properties

International Nuclear Information System (INIS)

Grossterlinden, R.; Imlau, K.P.; Kawalla, R.; Lotter, U.; Reip, C.-P.

1996-01-01

Textures in steels play an essential role for applications where anisotropic properties are favourable. For the example of deep-drawing steel sheet the correlation between parameters characterising the behaviour in the deep-drawing process, as Lankford r-value and planar anisotropy Δr, and the crystallographic texture is considered. Furthermore, the development of texture in the course of manufacturing cold strip is followed for unalloyed and microalloyed deep-drawing grades. For representation of typical features of textures the method of orientation distribution functions (ODF) together with the description of texture by characteristic fibres is used. In detail, the parameters influencing textures, such as chemical composition, finishing temperature in the hot-rolling mill (in relation to the austenite or ferrite region), transformation behaviour, cold-rolling reduction and the course of temperature during recrystallizing annealing, are discussed. From the given survey it may be concluded, that in the manufacturing process there are many possibilities to control the texture of the finished product. Finally, it is shown that the impact of textures on the r-value can be calculated with high precision. On the other hand, the formation of texture itself, particularly during hot-rolling, transformation and recrystallization after cold-rolling, at present can be calculated and modelled only in simple cases. (orig.)
Effect of crystallographic texture on the bulk magnetic properties of non-oriented electrical steels

Energy Technology Data Exchange (ETDEWEB)

Ghosh, Pampa, E-mail: pampaghosh@gmail.com [Department of Mining and Materials Engineering, McGill University, 3610 University Street, Montreal, Quebec, Canada H3A 0C5 (Canada); Chromik, Richard R., E-mail: richard.chromik@mcgill.ca [Department of Mining and Materials Engineering, McGill University, 3610 University Street, Montreal, Quebec, Canada H3A 0C5 (Canada); Vashegi, Babak; Knight, Andrew M. [Department of Electrical and Computer Engineering, University of Alberta, Edmonton, Alberta, Canada T6G 2V4 (Canada)

2014-09-01

Quantitative physical models for non-oriented electrical steels require precise knowledge of chemical and microstructural parameters for the material, with crystallographic texture being one of the most important. Describing the structure–property relationships in these materials is made difficult in that all of the parameters have an effect on magnetic properties. In the present study, a set of non-oriented electrical steel specimens are examined, where chemistry and grain size are kept similar from sample to sample, but texture is varied. A new texture parameter called Magnetic Texture Factor is introduced which is defined as the ratio of the volume fractions of 〈100〉 direction to 〈111〉 direction along magnetization vector. It was found that this Magnetic Texture Factor was a better parameter for identifying trends of magnetic properties with crystallographic texture than the often used Texture Factor, which is described as the ratio of the volume fractions of {100} planes to {111} planes. - Highlights: • Magnetic properties of a set of electrical steels were measured. • The effect of crystallographic texture was isolated from other material parameters. • A new texture factor is introduced called the Magnetic Texture Factor.
RHEED transmission mode and pole figures thin film and nanostructure texture analysis

CERN Document Server

Wang, Gwo-Ching

2014-01-01

This unique book covers the fundamental principle of electron diffraction, basic instrumentation of RHEED, definitions of textures in thin films and nanostructures, mechanisms and control of texture formation, and examples of RHEED transmission mode measurements of texture and texture evolution of thin films and nanostructures. Also presented is a new application of RHEED in the transmission mode called RHEED pole figure technique that can be used to monitor the texture evolution in thin film growth and nanostructures and is not limited to single crystal epitaxial film growth. Details of the construction of RHEED pole figures and the interpretation of observed pole figures are presented. Materials covered include metals, semiconductors, and thin insulators. This book also: Presents a new application of RHEED in the transmission mode Introduces a variety of textures from metals, semiconductors, compound semiconductors, and their characteristics in RHEED pole figures Provides examples of RHEED measurements o...
Colour and texture associations in voice-induced synaesthesia

Directory of Open Access Journals (Sweden)

Anja eMoos

2013-09-01

Full Text Available Voice-induced synaesthesia, a form of synaesthesia in which synaesthetic perceptions are induced by the sounds of people’s voices, appears to be relatively rare and has not been systematically studied. In this study we investigated the synaesthetic colour and visual texture perceptions experienced in response to different types of voice quality (e.g. nasal, whisper, falsetto. Experiences of three different groups – self-reported voice synaesthetes, phoneticians and controls – were compared using both qualitative and quantitative analysis in a study conducted online. Whilst, in the qualitative analysis, synaesthetes used more colour and texture terms to describe voices than either phoneticians or controls, only weak differences, and many similarities, between groups were found in the quantitative analysis. Notable consistent results between groups were the matching of higher speech fundamental frequencies with lighter and redder colours, the matching of whispery voices with smoke-like textures and the matching of harsh and creaky voices with textures resembling dry cracked soil. These data are discussed in the light of current thinking about definitions and categorizations of synaesthesia, especially in cases where individuals apparently have a range of different synaesthetic inducers.
Color and texture associations in voice-induced synesthesia

Science.gov (United States)

Moos, Anja; Simmons, David; Simner, Julia; Smith, Rachel

2013-01-01

Voice-induced synesthesia, a form of synesthesia in which synesthetic perceptions are induced by the sounds of people's voices, appears to be relatively rare and has not been systematically studied. In this study we investigated the synesthetic color and visual texture perceptions experienced in response to different types of “voice quality” (e.g., nasal, whisper, falsetto). Experiences of three different groups—self-reported voice synesthetes, phoneticians, and controls—were compared using both qualitative and quantitative analysis in a study conducted online. Whilst, in the qualitative analysis, synesthetes used more color and texture terms to describe voices than either phoneticians or controls, only weak differences, and many similarities, between groups were found in the quantitative analysis. Notable consistent results between groups were the matching of higher speech fundamental frequencies with lighter and redder colors, the matching of “whispery” voices with smoke-like textures, and the matching of “harsh” and “creaky” voices with textures resembling dry cracked soil. These data are discussed in the light of current thinking about definitions and categorizations of synesthesia, especially in cases where individuals apparently have a range of different synesthetic inducers. PMID:24032023
Completed Local Ternary Pattern for Rotation Invariant Texture Classification

Directory of Open Access Journals (Sweden)

Taha H. Rassem

2014-01-01

Full Text Available Despite the fact that the two texture descriptors, the completed modeling of Local Binary Pattern (CLBP and the Completed Local Binary Count (CLBC, have achieved a remarkable accuracy for invariant rotation texture classification, they inherit some Local Binary Pattern (LBP drawbacks. The LBP is sensitive to noise, and different patterns of LBP may be classified into the same class that reduces its discriminating property. Although, the Local Ternary Pattern (LTP is proposed to be more robust to noise than LBP, however, the latter’s weakness may appear with the LTP as well as with LBP. In this paper, a novel completed modeling of the Local Ternary Pattern (LTP operator is proposed to overcome both LBP drawbacks, and an associated completed Local Ternary Pattern (CLTP scheme is developed for rotation invariant texture classification. The experimental results using four different texture databases show that the proposed CLTP achieved an impressive classification accuracy as compared to the CLBP and CLBC descriptors.
Signature Curves Statistics of DNA Supercoils

OpenAIRE

Shakiban, Cheri; Lloyd, Peter

2004-01-01

In this paper we describe the Euclidean signature curves for two dimensional closed curves in the plane and their generalization to closed space curves. The focus will be on discrete numerical methods for approximating such curves. Further we will apply these numerical methods to plot the signature curves related to three-dimensional simulated DNA supercoils. Our primary focus will be on statistical analysis of the data generated for the signature curves of the supercoils. We will try to esta...
Synthesized interstitial lung texture for use in anthropomorphic computational phantoms

Science.gov (United States)

Becchetti, Marc F.; Solomon, Justin B.; Segars, W. Paul; Samei, Ehsan

2016-04-01

A realistic model of the anatomical texture from the pulmonary interstitium was developed with the goal of extending the capability of anthropomorphic computational phantoms (e.g., XCAT, Duke University), allowing for more accurate image quality assessment. Contrast-enhanced, high dose, thorax images for a healthy patient from a clinical CT system (Discovery CT750HD, GE healthcare) with thin (0.625 mm) slices and filtered back- projection (FBP) were used to inform the model. The interstitium which gives rise to the texture was defined using 24 volumes of interest (VOIs). These VOIs were selected manually to avoid vasculature, bronchi, and bronchioles. A small scale Hessian-based line filter was applied to minimize the amount of partial-volumed supernumerary vessels and bronchioles within the VOIs. The texture in the VOIs was characterized using 8 Haralick and 13 gray-level run length features. A clustered lumpy background (CLB) model with added noise and blurring to match CT system was optimized to resemble the texture in the VOIs using a genetic algorithm with the Mahalanobis distance as a similarity metric between the texture features. The most similar CLB model was then used to generate the interstitial texture to fill the lung. The optimization improved the similarity by 45%. This will substantially enhance the capabilities of anthropomorphic computational phantoms, allowing for more realistic CT simulations.
45 CFR 81.32 - Signature of documents.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Signature of documents. 81.32 Section 81.32 Public... UNDER PART 80 OF THIS TITLE Form, Execution, Service and Filing of Documents § 81.32 Signature of documents. The signature of a party, authorized officer, employee or attorney constitutes a certificate that...
Textural and isotopic evidence for Ca-Mg carbonate pedogenesis

Science.gov (United States)

Diaz-Hernandez, J. L.; Sánchez-Navas, A.; Delgado, A.; Yepes, J.; Garcia-Casco, A.

2018-02-01

Models for evaluating the terrestrial carbon cycle must take into account not only soil organic carbon, represented by a mixture of plant and animal remains, but also soil inorganic carbon, contained in minerals, mainly in calcite and dolomite. Thick soil caliches derived from weathering of mafic and ultramafic rocks must be considered as sinks for carbon storage in soils. The formation of calcite and dolomite from pedogenic alteration of volcanic tephras under an aridic moisture regime is studied in an unusually thick 3-m soil profile on Gran Canaria island (Canary Islands, Spain). The biological activity of the pedogenic environment (soil respiration) releases CO2 incorporated as dissolved inorganic carbon (DIC) in waters. It drives the formation of low-magnesian calcite and calcian dolomite over basaltic substrates, with a δ13C negative signature (-8 to -6‰ vs. V-PDB). Precipitation of authigenic carbonates in the soil is accompanied by the formation of Mg-rich clay minerals and quartz after the weathering of basalts. Mineralogical, textural, compositional, and isotopic variations throughout the soil profile studied indicate that dolomite formed at greater depths and earlier than the calcite. The isotopic signatures of the surficial calcite and deeper dolomite crusts are primary and resulted from the dissolution-precipitation cycles that led to the formation of both types of caliches under different physicochemical conditions. Dolomite formed within a clay-rich matrix through diffusive transport of reactants. It is precipitated from water with more negative δ18O values (-1.5 to -3.5‰ vs. V-SMOW) in the subsoil compared to those of water in equilibrium with surficial calcite. Thus, calcite precipitated after dolomite, and directly from percolating solutions in equilibrium with vadose water enriched in δ18O (-0.5 to +1.5‰) due to the evaporation processes. The accumulation of inorganic carbon reaches 586.1 kg m-2 in the soil studied, which means that the
Topological patterns of mesh textures in serpentinites

Science.gov (United States)

Miyazawa, M.; Suzuki, A.; Shimizu, H.; Okamoto, A.; Hiraoka, Y.; Obayashi, I.; Tsuji, T.; Ito, T.

2017-12-01

Serpentinization is a hydration process that forms serpentine minerals and magnetite within the oceanic lithosphere. Microfractures crosscut these minerals during the reactions, and the structures look like mesh textures. It has been known that the patterns of microfractures and the system evolutions are affected by the hydration reaction and fluid transport in fractures and within matrices. This study aims at quantifying the topological patterns of the mesh textures and understanding possible conditions of fluid transport and reaction during serpentinization in the oceanic lithosphere. Two-dimensional simulation by the distinct element method (DEM) generates fracture patterns due to serpentinization. The microfracture patterns are evaluated by persistent homology, which measures features of connected components of a topological space and encodes multi-scale topological features in the persistence diagrams. The persistence diagrams of the different mesh textures are evaluated by principal component analysis to bring out the strong patterns of persistence diagrams. This approach help extract feature values of fracture patterns from high-dimensional and complex datasets.
Texture segregation, surface representation and figure-ground separation.

Science.gov (United States)

Grossberg, S; Pessoa, L

1998-09-01

A widespread view is that most texture segregation can be accounted for by differences in the spatial frequency content of texture regions. Evidence from both psychophysical and physiological studies indicate, however, that beyond these early filtering stages, there are stages of 3-D boundary segmentation and surface representation that are used to segregate textures. Chromatic segregation of element-arrangement patterns--as studied by Beck and colleagues--cannot be completely explained by the filtering mechanisms previously employed to account for achromatic segregation. An element arrangement pattern is composed of two types of elements that are arranged differently in different image regions (e.g. vertically on top and diagonally on the bottom). FACADE theory mechanisms that have previously been used to explain data about 3-D vision and figure-ground separation are here used to simulate chromatic texture segregation data, including data with equiluminant elements on dark or light homogeneous backgrounds, or backgrounds composed of vertical and horizontal dark or light stripes, or horizontal notched stripes. These data include the fact that segregation of patterns composed of red and blue squares decreases with increasing luminance of the interspaces. Asymmetric segregation properties under 3-D viewing conditions with the equiluminant elements close or far are also simulated. Two key model properties are a spatial impenetrability property that inhibits boundary grouping across regions with non-collinear texture elements and a boundary-surface consistency property that uses feedback between boundary and surface representations to eliminate spurious boundary groupings and separate figures from their backgrounds.
Texture and structure of VT-19 alloy thin sheets and their welded joints

International Nuclear Information System (INIS)

Ehgiz, I.V.; Babarehko, A.A.; Khorev, M.A.

1986-01-01

The phase content and texture of VT-19 alloys in all zones of welded joints (weld, a heat affected zone a base metal) after different heat treatments and the effect of the latter on mechanical properties of the welded joint are studied. It is characteristic of a 2.5 mm sheet of the VT-19 alloy rolled in the β → α phase transformation temperature range the development of β-phase plane deformation textures with (001), (112), (111) orientations in the rolling plane that compose 56% of the β-phase material volume. In this case a texture of univariant phase transformation of the above β-phase components { 1120 } - { 1122 } - { 1124 }, as well as that of α-phase plane deformation } 1014 } - { 1015 } are formed in the α-phase. Hardening with subsequent ageing of the rolled sheet leads to increasing the fraction of textured material in the β-phase up to 95% with expanding the volume with the (111) orientation, but as a whole the β-phase texture type remains the same. The α-phase texture type corresponds to the univariant β → α phase transformation, the material having the α-phase texture accounts for 70%. In the weld zone the and axes with orientation spreading to 20 deg are the β-phase crystallization axes in the trans verse direction. The textured material accounts for ∼ 70%. The same texture is observed along the normal to the sheet plane. The α-phase texture after hardening and ageing corresponds to the univariant phase transformation of the above-mentionedβ-phase orientations, the material volume with the α-phase texture is ∼80%

Modeling the lexical morphology of Western handwritten signatures.

Directory of Open Access Journals (Sweden)

Moises Diaz-Cabrera

Full Text Available A handwritten signature is the final response to a complex cognitive and neuromuscular process which is the result of the learning process. Because of the many factors involved in signing, it is possible to study the signature from many points of view: graphologists, forensic experts, neurologists and computer vision experts have all examined them. Researchers study written signatures for psychiatric, penal, health and automatic verification purposes. As a potentially useful, multi-purpose study, this paper is focused on the lexical morphology of handwritten signatures. This we understand to mean the identification, analysis, and description of the signature structures of a given signer. In this work we analyze different public datasets involving 1533 signers from different Western geographical areas. Some relevant characteristics of signature lexical morphology have been selected, examined in terms of their probability distribution functions and modeled through a General Extreme Value distribution. This study suggests some useful models for multi-disciplinary sciences which depend on handwriting signatures.
New tools to investigate textures of pyroclastic deposits

Energy Technology Data Exchange (ETDEWEB)

Sarocchi, Damiano [Instituto de GeologIa / Fac. IngenierIa UASLP, Dr. M. Nava No 5, Zona Universitaria 78240, San Luis PotosI (Mexico); Borselli, Lorenzo [Istituto di Ricerca per la Protezione Idrogeologica, Consiglio Nazionale delle Ricerche, Via Madonna del Piano 10, 50019, Sesto Fiorentino (Italy); MacIas, Jose Luis [Departamento de VulcanologIa, Instituto de Geofisica, Universidad Nacional Autonoma de Mexico, Coyoacan 04510, D.F. (Mexico)

2008-10-01

A pyroclastic flow deposit keeps a fingerprint of the physical processes that occurred in the flow during transport and settling. Part of this information is recorded in the texture of the deposit offering an instantaneous view of the flow prior to freezing. In this work we introduce some texture's analysis techniques, based on image analysis, that we have developed or tuned during the last years.
Signature molecular descriptor : advanced applications.

Energy Technology Data Exchange (ETDEWEB)

Visco, Donald Patrick, Jr. (Tennessee Technological University, Cookeville, TN)

2010-04-01

In this work we report on the development of the Signature Molecular Descriptor (or Signature) for use in the solution of inverse design problems as well as in highthroughput screening applications. The ultimate goal of using Signature is to identify novel and non-intuitive chemical structures with optimal predicted properties for a given application. We demonstrate this in three studies: green solvent design, glucocorticoid receptor ligand design and the design of inhibitors for Factor XIa. In many areas of engineering, compounds are designed and/or modified in incremental ways which rely upon heuristics or institutional knowledge. Often multiple experiments are performed and the optimal compound is identified in this brute-force fashion. Perhaps a traditional chemical scaffold is identified and movement of a substituent group around a ring constitutes the whole of the design process. Also notably, a chemical being evaluated in one area might demonstrate properties very attractive in another area and serendipity was the mechanism for solution. In contrast to such approaches, computer-aided molecular design (CAMD) looks to encompass both experimental and heuristic-based knowledge into a strategy that will design a molecule on a computer to meet a given target. Depending on the algorithm employed, the molecule which is designed might be quite novel (re: no CAS registration number) and/or non-intuitive relative to what is known about the problem at hand. While CAMD is a fairly recent strategy (dating to the early 1980s), it contains a variety of bottlenecks and limitations which have prevented the technique from garnering more attention in the academic, governmental and industrial institutions. A main reason for this is how the molecules are described in the computer. This step can control how models are developed for the properties of interest on a given problem as well as how to go from an output of the algorithm to an actual chemical structure. This report
Ship Signature Management System : Functionality

NARCIS (Netherlands)

Arciszewski, H.F.R.; Lier, L. van; Meijer, Y.G.S.; Noordkamp, H.W.; Wassenaar, A.S.

2010-01-01

A signature of a platform is the manner in which the platform manifests itself to a certain type of sensor and how observable it is when such a sensor is used to detect the platform. Because many military platforms use sensors in different media, it is the total of its different signatures that
Buffer layers grown by replicating the texture of an original template tape

International Nuclear Information System (INIS)

Lim, Sunme; Yoo, Jaeun; Park, Chan; Youm, Dojun

2007-01-01

We propose a fabrication method of the buffer layers, whose biaxial textures are replicated from an original template tape. The purpose of this method is economical texturing process for coated conductors. At first we prepared a biaxially textured metal tape (TM-tape). Then a sacrifice layer (SA), a buffer layer (BU) and a thick metallic layer (SM) were sequentially deposited on the TM-tape. SA-layer and BU-layer were deposited epitaxially to copy the texture of the TM-tape. SA-layer was dissoluble in water. SM-layer with the textured BU-layer was separated and could be used for a supporting tape for the further growth of a superconducting layer. In this way, it is possible to reuse the original textured TM-tape many times. In this paper, we report the results of our experiments, in which we used a biaxially Ni tape, BaO film, STO film, and a thick Ag film for TM-tape, SA-layer, BU-layer, and SM-layer, respectively. The Ag/STO layers were successfully separated form the Ni tape by dissolving the BaO layer in water. The texture quality of the STO layer was well secured after the separation
Enhancement of Stereo Imagery by Artificial Texture Projection Generated Using a LIDAR

Science.gov (United States)

Veitch-Michaelis, Joshua; Muller, Jan-Peter; Walton, David; Storey, Jonathan; Foster, Michael; Crutchley, Benjamin

2016-06-01

Passive stereo imaging is capable of producing dense 3D data, but image matching algorithms generally perform poorly on images with large regions of homogenous texture due to ambiguous match costs. Stereo systems can be augmented with an additional light source that can project some form of unique texture onto surfaces in the scene. Methods include structured light, laser projection through diffractive optical elements, data projectors and laser speckle. Pattern projection using lasers has the advantage of producing images with a high signal to noise ratio. We have investigated the use of a scanning visible-beam LIDAR to simultaneously provide enhanced texture within the scene and to provide additional opportunities for data fusion in unmatched regions. The use of a LIDAR rather than a laser alone allows us to generate highly accurate ground truth data sets by scanning the scene at high resolution. This is necessary for evaluating different pattern projection schemes. Results from LIDAR generated random dots are presented and compared to other texture projection techniques. Finally, we investigate the use of image texture analysis to intelligently project texture where it is required while exploiting the texture available in the ambient light image.
ENHANCEMENT OF STEREO IMAGERY BY ARTIFICIAL TEXTURE PROJECTION GENERATED USING A LIDAR

Directory of Open Access Journals (Sweden)

J. Veitch-Michaelis

2016-06-01

Full Text Available Passive stereo imaging is capable of producing dense 3D data, but image matching algorithms generally perform poorly on images with large regions of homogenous texture due to ambiguous match costs. Stereo systems can be augmented with an additional light source that can project some form of unique texture onto surfaces in the scene. Methods include structured light, laser projection through diffractive optical elements, data projectors and laser speckle. Pattern projection using lasers has the advantage of producing images with a high signal to noise ratio. We have investigated the use of a scanning visible-beam LIDAR to simultaneously provide enhanced texture within the scene and to provide additional opportunities for data fusion in unmatched regions. The use of a LIDAR rather than a laser alone allows us to generate highly accurate ground truth data sets by scanning the scene at high resolution. This is necessary for evaluating different pattern projection schemes. Results from LIDAR generated random dots are presented and compared to other texture projection techniques. Finally, we investigate the use of image texture analysis to intelligently project texture where it is required while exploiting the texture available in the ambient light image.
Texture Formation of Electroplated Nickel and Nickel Alloy on Cu Substrate

International Nuclear Information System (INIS)

Lee, Hee Gyoun; Hong, Gye Won; Kim, Jae Geun; Lee, Sun Wang; Kim, Ho Jin

2006-01-01

Nickel and nickel-tungsten alloy were electroplated on a cold rolled and heat treated copper(Cu) substrate. 4 mm-thick high purity commercial grade Cu was rolled to various thicknesses of 50, 70, 100 and 150 micron. High reduction ratio of 30% was applied down to 150 micron. Rolled texture was converted into cube texture via high temperature heat treatment at 400-800 degrees C. Grain size of Cu was about 50 micron which is much smaller compared to >300 micron for the Cu prepared using smaller reduction pass of 5%. 1.5 km-long 150 micron Cu was fabricated with a rolling speed of 33 m/min and texture of Cu was uniform along length. Abnormal grain growth and non-cube texture appeared for the specimen anneal above 900 degrees C. 1-10 micron thick Ni and Ni-W film was electroplated onto an annealed cube-textured Cu or directly on a cold rolled Cu. Both specimens were annealed and the degree of texture was measured. For electroplating of Ni on annealed Cu, Ni layer duplicated the cube-texture of Cu substrate and the FWHM of in plane XRD measurement for annealed Cu layer and electroplated layer was 9.9 degree and 13.4 degree, respectively. But the FWHM of in plane XRD measurement of the specimen which electroplated Ni directly on cold rolled Cu was 8.6 degree, which is better texture than that of nickel electroplated on annealed Cu and it might be caused by the suppression of secondary recrystallization and abnormal grain growth of Cu at high temperature above 900 degrees C by electroplated nickel.
Driving forces for texture transformation in thin Ag films

International Nuclear Information System (INIS)

Ellis, Elizabeth A.; Chmielus, Markus; Lin, Ming-Tzer; Joress, Howie; Visser, Kyle; Woll, Arthur; Vinci, Richard P.; Brown, Walter L.; Baker, Shefford P.

2016-01-01

The well-known thickness-dependent (111)-to-(100) texture transformation in thin FCC films is usually attributed to a competition between interface and strain energies. In this model, thin films retain their (111) texture due to the lower energy of the (111) interface, while thick films transform to (100) due to the lower stiffness and thus strain energy of a (100) film. However, recent work has called this model into question, suggesting that neither the stress nor the interface energy play a dominant role in texture transformation. We investigated the driving forces involved in this transformation by using a bulge test apparatus to induce different stresses in thin Ag films under identical annealing conditions. In situ synchrotron XRD measurements show the change in texture during annealing, and reveal that applied stresses have no effect on the transformation. Stress analysis shows that differences in driving forces for texture transformation due to applied bulge pressure were significant (≈200 kJ/m 3 ), suggesting that a different, much larger driving force must be responsible. Reduction in defect energy has been proposed as an alternative. However, vacancy and dislocation densities must be exceptionally high to significantly exceed the strain energy and do not provide obvious orientation selection mechanisms. Nanotwins in reported densities are shown to provide greater driving force (≈1000 kJ/m 3 ) and may account for orientation selection. The large difference between the calculated strain and defect energies and the driving force for grain growth (21,100 kJ/m 3 ) casts doubt on the applicability of a simple thermodynamic model of texture transformation.
The quantitative representation of fiber-and sheet-texture in metals of cubic system

International Nuclear Information System (INIS)

Kim, H.J.; Kim, S.C.; Chun, B.C.; Lee, C.Y.

1983-01-01

This is the first article of a series dealing with studies on the quantitative representation of fiber-and sheet-type textures in metals of cubic crystal system. Texture measurements by neutron diffraction method are analyzed using Bunge's series expansion method and the effect of series truncation is studied for samples of various texture sharpness. The present article describes two computer programs, TXFIB and TXSHT, develped for the analysis of the respective fiber-and sheet-type texture. Using these computer programs, the orientation distribution function can be expanded in the series of generalized spherical harmonics up to 58th term from 6 experimental pole figures as input. Estimations of various errors involved in the texture analysis and texture sharpness index are also included in the programs. (Author)
Textural Evolution During Micro Direct Metal Deposition of NiTi Alloy

Science.gov (United States)

Khademzadeh, Saeed; Bariani, Paolo F.; Bruschi, Stefania

2018-03-01

In this research, a micro direct metal deposition process, newly developed as a potential method for micro additive manufacturing was used to fabricate NiTi builds. The effect of scanning strategy on grain growth and textural evolution was investigated using scanning electron microscope equipped with electron backscattered diffraction detector. Investigations showed that, the angle between the successive single tracks has an important role in grain size distribution and textural evolution of NiTi phase. Unidirectional laser beam scanning pattern developed a fiber texture; conversely, a backward and forward scanning pattern developed a strong ‖‖ RD texture on the surface of NiTi cubic samples produced by micro direct metal deposition.
Texture Feature Extraction and Classification for Iris Diagnosis

Science.gov (United States)

Ma, Lin; Li, Naimin

Appling computer aided techniques in iris image processing, and combining occidental iridology with the traditional Chinese medicine is a challenging research area in digital image processing and artificial intelligence. This paper proposes an iridology model that consists the iris image pre-processing, texture feature analysis and disease classification. To the pre-processing, a 2-step iris localization approach is proposed; a 2-D Gabor filter based texture analysis and a texture fractal dimension estimation method are proposed for pathological feature extraction; and at last support vector machines are constructed to recognize 2 typical diseases such as the alimentary canal disease and the nerve system disease. Experimental results show that the proposed iridology diagnosis model is quite effective and promising for medical diagnosis and health surveillance for both hospital and public use.
Predicting the Coupling Properties of Axially-Textured Materials

Science.gov (United States)

Fuentes-Cobas, Luis E.; Muñoz-Romero, Alejandro; Montero-Cabrera, María E.; Fuentes-Montero, Luis; Fuentes-Montero, María E.

2013-01-01

A description of methods and computer programs for the prediction of “coupling properties” in axially-textured polycrystals is presented. Starting data are the single-crystal properties, texture and stereography. The validity and proper protocols for applying the Voigt, Reuss and Hill approximations to estimate coupling properties effective values is analyzed. Working algorithms for predicting mentioned averages are given. Bunge’s symmetrized spherical harmonics expansion of orientation distribution functions, inverse pole figures and (single and polycrystals) physical properties is applied in all stages of the proposed methodology. The established mathematical route has been systematized in a working computer program. The discussion of piezoelectricity in a representative textured ferro-piezoelectric ceramic illustrates the application of the proposed methodology. Polycrystal coupling properties, predicted by the suggested route, are fairly close to experimentally measured ones. PMID:28788370
Predicting the Coupling Properties of Axially-Textured Materials

Directory of Open Access Journals (Sweden)

María E. Fuentes-Montero

2013-10-01

Full Text Available A description of methods and computer programs for the prediction of “coupling properties” in axially-textured polycrystals is presented. Starting data are the single-crystal properties, texture and stereography. The validity and proper protocols for applying the Voigt, Reuss and Hill approximations to estimate coupling properties effective values is analyzed. Working algorithms for predicting mentioned averages are given. Bunge’s symmetrized spherical harmonics expansion of orientation distribution functions, inverse pole figures and (single and polycrystals physical properties is applied in all stages of the proposed methodology. The established mathematical route has been systematized in a working computer program. The discussion of piezoelectricity in a representative textured ferro-piezoelectric ceramic illustrates the application of the proposed methodology. Polycrystal coupling properties, predicted by the suggested route, are fairly close to experimentally measured ones.
Selective Extraction of Entangled Textures via Adaptive PDE Transform

Directory of Open Access Journals (Sweden)

Yang Wang

2012-01-01

Full Text Available Texture and feature extraction is an important research area with a wide range of applications in science and technology. Selective extraction of entangled textures is a challenging task due to spatial entanglement, orientation mixing, and high-frequency overlapping. The partial differential equation (PDE transform is an efficient method for functional mode decomposition. The present work introduces adaptive PDE transform algorithm to appropriately threshold the statistical variance of the local variation of functional modes. The proposed adaptive PDE transform is applied to the selective extraction of entangled textures. Successful separations of human face, clothes, background, natural landscape, text, forest, camouflaged sniper and neuron skeletons have validated the proposed method.
Cell short circuit, preshort signature

Science.gov (United States)

Lurie, C.

1980-01-01

Short-circuit events observed in ground test simulations of DSCS-3 battery in-orbit operations are analyzed. Voltage signatures appearing in the data preceding the short-circuit event are evaluated. The ground test simulation is briefly described along with performance during reconditioning discharges. Results suggest that a characteristic signature develops prior to a shorting event.
Prediction of textural attributes using color values of banana (Musa sapientum) during ripening.

Science.gov (United States)

Jaiswal, Pranita; Jha, Shyam Narayan; Kaur, Poonam Preet; Bhardwaj, Rishi; Singh, Ashish Kumar; Wadhawan, Vishakha

2014-06-01

Banana is an important sub-tropical fruit in international trade. It undergoes significant textural and color transformations during ripening process, which in turn influence the eating quality of the fruit. In present study, color ('L', 'a' and 'b' value) and textural attributes of bananas (peel, fruit and pulp firmness; pulp toughness; stickiness) were studied simultaneously using Hunter Color Lab and Texture Analyser, respectively, during ripening period of 10 days at ambient atmosphere. There was significant effect of ripening period on all the considered textural characteristics and color properties of bananas except color value 'b'. In general, textural descriptors (peel, fruit and pulp firmness; and pulp toughness) decreased during ripening except stickiness, while color values viz 'a' and 'b' increased with ripening barring 'L' value. Among various textural attributes, peel toughness and pulp firmness showed highest correlation (r) with 'a' value of banana peel. In order to predict textural properties using color values of banana, five types of equations (linear/polynomial/exponential/logarithmic/power) were fitted. Among them, polynomial equation was found to be the best fit (highest coefficient of determination, R(2)) for prediction of texture using color properties for bananas. The pulp firmness, peel toughness and pulp toughness showed R(2) above 0.84 with indicating its potentiality of the fitted equations for prediction of textural profile of bananas non-destructively using 'a' value.
Fabrication and properties of radially C textured PMN-PT cylinders for transducer applications

Science.gov (United States)

Poterala, Stephen F.; Meyer, Richard J.; Messing, Gary L.

2012-07-01

C Textured PMN-PT ceramics have electromechanical properties (d33 = 850-1050 pm/V, k33 = 0.79-0.83) between those of conventional PZT ceramics and relaxor PMN-PT crystals. In this work, we tailor crystallographic orientation in textured PMN-PT ceramics for transducer designs with non-planar poling surfaces. Specifically, omni-directional cylindrical transducer elements were fabricated using monolithic, radially C textured and poled PMN-PT ceramic. Texture was produced by templated grain growth using NBT-PT templates, which were oriented radially by wrapping green ceramic tapes around a cylindrical mandrel. Finished transducer elements measure ˜5 cm in diameter by ˜2.5 cm in height and demonstrate scalability of textured ceramic fabrication techniques. The fabricated cylinders are ˜50 vol. % textured and show high 31-mode electromechanical properties compared to PZT ceramics (d31 = -259 pm/V, k31 = 0.43, ɛT33 = 3000, and Qm = 350). Frequency bandwidth is related to the square of the hoop mode coupling coefficient kh2, which is ˜60% higher in textured PMN-PT cylinders compared to PZT 5H. Finite element simulations show that this parameter may be further increased by improving texture quality to ≥90 vol. %. Radially textured PMN-PT may thus improve performance in omni-directional cylindrical transducers while avoiding the need for segmented single crystal designs.
EFFECTIVE MULTI-RESOLUTION TRANSFORM IDENTIFICATION FOR CHARACTERIZATION AND CLASSIFICATION OF TEXTURE GROUPS

Directory of Open Access Journals (Sweden)

S. Arivazhagan

2011-11-01

Full Text Available Texture classification is important in applications of computer image analysis for characterization or classification of images based on local spatial variations of intensity or color. Texture can be defined as consisting of mutually related elements. This paper proposes an experimental approach for identification of suitable multi-resolution transform for characterization and classification of different texture groups based on statistical and co-occurrence features derived from multi-resolution transformed sub bands. The statistical and co-occurrence feature sets are extracted for various multi-resolution transforms such as Discrete Wavelet Transform (DWT, Stationary Wavelet Transform (SWT, Double Density Wavelet Transform (DDWT and Dual Tree Complex Wavelet Transform (DTCWT and then, the transform that maximizes the texture classification performance for the particular texture group is identified.
Modelling patterns of pollinator species richness and diversity using satellite image texture.

Directory of Open Access Journals (Sweden)

Sylvia Hofmann

Full Text Available Assessing species richness and diversity on the basis of standardised field sampling effort represents a cost- and time-consuming method. Satellite remote sensing (RS can help overcome these limitations because it facilitates the collection of larger amounts of spatial data using cost-effective techniques. RS information is hence increasingly analysed to model biodiversity across space and time. Here, we focus on image texture measures as a proxy for spatial habitat heterogeneity, which has been recognized as an important determinant of species distributions and diversity. Using bee monitoring data of four years (2010-2013 from six 4 × 4 km field sites across Central Germany and a multimodel inference approach we test the ability of texture features derived from Landsat-TM imagery to model local pollinator biodiversity. Textures were shown to reflect patterns of bee diversity and species richness to some extent, with the first-order entropy texture and terrain roughness being the most relevant indicators. However, the texture measurements accounted for only 3-5% of up to 60% of the variability that was explained by our final models, although the results are largely consistent across different species groups (bumble bees, solitary bees. While our findings provide indications in support of the applicability of satellite imagery textures for modeling patterns of bee biodiversity, they are inconsistent with the high predictive power of texture metrics reported in previous studies for avian biodiversity. We assume that our texture data captured mainly heterogeneity resulting from landscape configuration, which might be functionally less important for wild bees than compositional diversity of plant communities. Our study also highlights the substantial variability among taxa in the applicability of texture metrics for modelling biodiversity.

Modelling patterns of pollinator species richness and diversity using satellite image texture.

Science.gov (United States)

Hofmann, Sylvia; Everaars, Jeroen; Schweiger, Oliver; Frenzel, Mark; Bannehr, Lutz; Cord, Anna F

2017-01-01

Assessing species richness and diversity on the basis of standardised field sampling effort represents a cost- and time-consuming method. Satellite remote sensing (RS) can help overcome these limitations because it facilitates the collection of larger amounts of spatial data using cost-effective techniques. RS information is hence increasingly analysed to model biodiversity across space and time. Here, we focus on image texture measures as a proxy for spatial habitat heterogeneity, which has been recognized as an important determinant of species distributions and diversity. Using bee monitoring data of four years (2010-2013) from six 4 × 4 km field sites across Central Germany and a multimodel inference approach we test the ability of texture features derived from Landsat-TM imagery to model local pollinator biodiversity. Textures were shown to reflect patterns of bee diversity and species richness to some extent, with the first-order entropy texture and terrain roughness being the most relevant indicators. However, the texture measurements accounted for only 3-5% of up to 60% of the variability that was explained by our final models, although the results are largely consistent across different species groups (bumble bees, solitary bees). While our findings provide indications in support of the applicability of satellite imagery textures for modeling patterns of bee biodiversity, they are inconsistent with the high predictive power of texture metrics reported in previous studies for avian biodiversity. We assume that our texture data captured mainly heterogeneity resulting from landscape configuration, which might be functionally less important for wild bees than compositional diversity of plant communities. Our study also highlights the substantial variability among taxa in the applicability of texture metrics for modelling biodiversity.
3D texture analysis reveals imperceptible MRI textural alterations in the thalamus and putamen in progressive myoclonic epilepsy type 1, EPM1.

Directory of Open Access Journals (Sweden)

Sanna Suoranta

Full Text Available Progressive myoclonic epilepsy type 1 (EPM1 is an autosomal recessively inherited neurodegenerative disorder characterized by young onset age, myoclonus and tonic-clonic epileptic seizures. At the time of diagnosis, the visual assessment of the brain MRI is usually normal, with no major changes found later. Therefore, we utilized texture analysis (TA to characterize and classify the underlying properties of the affected brain tissue by means of 3D texture features. Sixteen genetically verified patients with EPM1 and 16 healthy controls were included in the study. TA was performed upon 3D volumes of interest that were placed bilaterally in the thalamus, amygdala, hippocampus, caudate nucleus and putamen. Compared to the healthy controls, EPM1 patients had significant textural differences especially in the thalamus and right putamen. The most significantly differing texture features included parameters that measure the complexity and heterogeneity of the tissue, such as the co-occurrence matrix-based entropy and angular second moment, and also the run-length matrix-based parameters of gray-level non-uniformity, short run emphasis and long run emphasis. This study demonstrates the usability of 3D TA for extracting additional information from MR images. Textural alterations which suggest complex, coarse and heterogeneous appearance were found bilaterally in the thalamus, supporting the previous literature on thalamic pathology in EPM1. The observed putamenal involvement is a novel finding. Our results encourage further studies on the clinical applications, feasibility, reproducibility and reliability of 3D TA.
The electronic identification, signature and security of information systems

Directory of Open Access Journals (Sweden)

Horovèák Pavel

2002-12-01

Full Text Available The contribution deals with the actual methods and technologies of information and communication systems security. It introduces the overview of electronic identification elements such as static password, dynamic password and single sign-on. Into this category belong also biometric and dynamic characteristics of verified person. Widespread is authentication based on identification elements ownership, such as various cards and authentication calculators. In the next part is specified a definition and characterization of electronic signature, its basic functions and certificate categories. Practical utilization of electronic signature consists of electronic signature acquirement, signature of outgoing email message, receiving of electronic signature and verification of electronic signature. The use of electronic signature is continuously growing and in connection with legislation development it exercises in all resorts.
Does It Matter if Preschool Children and Mothers Discuss Positive vs. Negative Events during Reminiscing? Links with Mother-Reported Attachment, Family Emotional Climate, and Socioemotional Development

Science.gov (United States)

Laible, Deborah

2011-01-01

The purpose of the study was to examine the differential relations between mother-child reminiscing about a positive emotional event vs. a negative emotional event and attachment security, family climate, and young children's socioemotional development. Fifty preschool children (M age = 50.69 months, SD = 4.64) and their mothers completed two…
The efficacy of treatment reminders of life with emphasis on integrative reminiscence on self-esteem and anxiety in widowed old men.

Directory of Open Access Journals (Sweden)

Malihe Pishvaei

2015-03-01

Full Text Available Loss of wife besides the phenomenon of aging could cause some psychological disorders and may shorten the duration of this stage of life. The aim of this study was to examine the efficacy of treatment reminders of life with emphasis on integrative reminiscence on self-esteem and anxiety in widowed old men.This was a clinical trial with pre-test and post-test design with a control group. The study population included All 60 to 80 year old men living in Meshginshahr; among whom, 34 participants were selected using convenience sampling method. They were randomly allocated into two equal groups (experimental and control. The experimental group participated in therapy sessions and the control group did not receive any intervention. The research instruments were Rosenberg Self-Esteem Scale and the General Anxiety Questionnaire. Data were analyzed using multivariable covariance analysis in SSPS-19. Statistical significance was set at P<0.05.MANCOVA results showed that the treatment positively affected the variables of self-esteem and anxiety in old widowed men (p<0.001.The reminders of life therapy with emphasis on integrative reminiscence may enhance self-esteem and reduce anxiety in widowed old men. This treatment gives better results compared to the traditional treatments and it is recommended to be implemented in nursing homes.
Texture classification of vegetation cover in high altitude wetlands zone

International Nuclear Information System (INIS)

Wentao, Zou; Bingfang, Wu; Hongbo, Ju; Hua, Liu

2014-01-01

The aim of this study was to investigate the utility of datasets composed of texture measures and other features for the classification of vegetation cover, specifically wetlands. QUEST decision tree classifier was applied to a SPOT-5 image sub-scene covering the typical wetlands area in Three River Sources region in Qinghai province, China. The dataset used for the classification comprised of: (1) spectral data and the components of principal component analysis; (2) texture measures derived from pixel basis; (3) DEM and other ancillary data covering the research area. Image textures is an important characteristic of remote sensing images; it can represent spatial variations with spectral brightness in digital numbers. When the spectral information is not enough to separate the different land covers, the texture information can be used to increase the classification accuracy. The texture measures used in this study were calculated from GLCM (Gray level Co-occurrence Matrix); eight frequently used measures were chosen to conduct the classification procedure. The results showed that variance, mean and entropy calculated by GLCM with a 9*9 size window were effective in distinguishing different vegetation types in wetlands zone. The overall accuracy of this method was 84.19% and the Kappa coefficient was 0.8261. The result indicated that the introduction of texture measures can improve the overall accuracy by 12.05% and the overall kappa coefficient by 0.1407 compared with the result using spectral and ancillary data
COMPUTER-IMPLEMENTED METHOD OF PERFORMING A SEARCH USING SIGNATURES

DEFF Research Database (Denmark)

2017-01-01

A computer-implemented method of processing a query vector and a data vector), comprising: generating a set of masks and a first set of multiple signatures and a second set of multiple signatures by applying the set of masks to the query vector and the data vector, respectively, and generating...... candidate pairs, of a first signature and a second signature, by identifying matches of a first signature and a second signature. The set of masks comprises a configuration of the elements that is a Hadamard code; a permutation of a Hadamard code; or a code that deviates from a Hadamard code...
Wettability transition of laser textured brass surfaces inside different mediums

Science.gov (United States)

Yan, Huangping; Abdul Rashid, Mohamed Raiz B.; Khew, Si Ying; Li, Fengping; Hong, Minghui

2018-01-01

Hydrophobic surface on brass has attracted intensive attention owing to its importance in scientific research and practical applications. Laser texturing provides a simple and promising method to achieve it. Reducing wettability transition time from hydrophilicity to hydrophobicity or superhydrophobicity remains a challenge. Herein, wettability transition of brass surfaces with hybrid micro/nano-structures fabricated by laser texturing was investigated by immersing the samples inside different mediums. Scanning electron microscopy, energy-dispersive X-ray analysis, X-ray photoelectron spectroscopy and surface contact angle measurement were employed to characterize surface morphology, chemical composition and wettability of the fabricated surfaces of brass samples. Wettability transition time from hydrophilicity to hydrophobicity was shortened by immersion into isopropyl alcohol for a period of 3 h as a result of the absorption and accumulation of organic substances on the textured brass surface. When the textured brass sample was immersed into sodium bicarbonate solution, flower-like structures on the sample surface played a key role in slowing down wettability transition. Moreover, it had the smallest steady state contact angle as compared to the others. This study provides a facile method to construct textured surfaces with tunable wetting behaviors and effectively extend the industrial applications of brass.
Signature effects in 2-qp rotational bands

International Nuclear Information System (INIS)

Jain, A.K.; Goel, A.

1992-01-01

The authors briefly review the progress in understanding the 2-qp rotational bands in odd-odd nuclei. Signature effects and the phenomenon of signature inversion are discussed. The Coriolis coupling appears to have all the ingredients to explain the inversion. Some recent work on signature dependence in 2-qp bands of even-even nuclei is also discussed; interesting features are pointed out
Texture of lipid bilayer domains

DEFF Research Database (Denmark)

Jensen, Uffe Bernchou; Brewer, Jonathan R.; Midtiby, Henrik Skov

2009-01-01

We investigate the texture of gel (g) domains in binary lipid membranes composed of the phospholipids DPPC and DOPC. Lateral organization of lipid bilayer membranes is a topic of fundamental and biological importance. Whereas questions related to size and composition of fluid membrane domain...... are well studied, the possibility of texture in gel domains has so far not been examined. When using polarized light for two-photon excitation of the fluorescent lipid probe Laurdan, the emission intensity is highly sensitive to the angle between the polarization and the tilt orientation of lipid acyl...... chains. By imaging the intensity variations as a function of the polarization angle, we map the lateral variations of the lipid tilt within domains. Results reveal that gel domains are composed of subdomains with different lipid tilt directions. We have applied a Fourier decomposition method...
Texture-based analysis of COPD

DEFF Research Database (Denmark)

Sørensen, Lauge; Nielsen, Mads; Lo, Pechin Chien Pau

2012-01-01

This study presents a fully automatic, data-driven approach for texture-based quantitative analysis of chronic obstructive pulmonary disease (COPD) in pulmonary computed tomography (CT) images. The approach uses supervised learning where the class labels are, in contrast to previous work, based...... on measured lung function instead of on manually annotated regions of interest (ROIs). A quantitative measure of COPD is obtained by fusing COPD probabilities computed in ROIs within the lung fields where the individual ROI probabilities are computed using a k nearest neighbor (kNN ) classifier. The distance...... and subsequently applied to classify 200 independent images from the same screening trial. The texture-based measure was significantly better at discriminating between subjects with and without COPD than were the two most common quantitative measures of COPD in the literature, which are based on density...
Time-dependent delayed signatures from energetic photon interrogations

International Nuclear Information System (INIS)

Norman, Daren R.; Jones, James L.; Blackburn, Brandon W.; Haskell, Kevin J.; Johnson, James T.; Watson, Scott M.; Hunt, Alan W.; Spaulding, Randy; Harmon, Frank

2007-01-01

Pulsed photonuclear interrogation environments generated by 8-24 MeV electron linac are rich with time-dependent, material-specific, radiation signatures. Nitrogen-based explosives and nuclear materials can be detected by exploiting these signatures in different delayed-time regions. Numerical and experimental results presented in this paper show the unique time and energy dependence of these signatures. It is shown that appropriate delayed-time windows are essential to acquire material-specific signatures in pulsed photonuclear assessment environments. These developments demonstrate that pulsed, high-energy, photon-inspection environments can be exploited for time-dependent, material-specific signatures through the proper operation of specialized detectors and detection methods
Peripheral blood signatures of lead exposure.

Directory of Open Access Journals (Sweden)

Heather G LaBreche

Full Text Available BACKGROUND: Current evidence indicates that even low-level lead (Pb exposure can have detrimental effects, especially in children. We tested the hypothesis that Pb exposure alters gene expression patterns in peripheral blood cells and that these changes reflect dose-specific alterations in the activity of particular pathways. METHODOLOGY/PRINCIPAL FINDING: Using Affymetrix Mouse Genome 430 2.0 arrays, we examined gene expression changes in the peripheral blood of female Balb/c mice following exposure to per os lead acetate trihydrate or plain drinking water for two weeks and after a two-week recovery period. Data sets were RMA-normalized and dose-specific signatures were generated using established methods of supervised classification and binary regression. Pathway activity was analyzed using the ScoreSignatures module from GenePattern. CONCLUSIONS/SIGNIFICANCE: The low-level Pb signature was 93% sensitive and 100% specific in classifying samples a leave-one-out crossvalidation. The high-level Pb signature demonstrated 100% sensitivity and specificity in the leave-one-out crossvalidation. These two signatures exhibited dose-specificity in their ability to predict Pb exposure and had little overlap in terms of constituent genes. The signatures also seemed to reflect current levels of Pb exposure rather than past exposure. Finally, the two doses showed differential activation of cellular pathways. Low-level Pb exposure increased activity of the interferon-gamma pathway, whereas high-level Pb exposure increased activity of the E2F1 pathway.
Conductive and robust nitride buffer layers on biaxially textured substrates

Science.gov (United States)

Sankar, Sambasivan [Chicago, IL; Goyal, Amit [Knoxville, TN; Barnett, Scott A [Evanston, IL; Kim, Ilwon [Skokie, IL; Kroeger, Donald M [Knoxville, TN

2009-03-31

The present invention relates to epitaxial, electrically conducting and mechanically robust, cubic nitride buffer layers deposited epitaxially on biaxially textured substrates such as metals and alloys. The invention comprises of a biaxially textured substrate with epitaxial layers of nitrides. The invention also discloses a method to form such epitaxial layers using a high rate deposition method as well as without the use of forming gases. The invention further comprises epitaxial layers of oxides on the biaxially textured nitride layer. In some embodiments the article further comprises electromagnetic devices which may have superconducting properties.
Effectiveness of follow-up reminiscence therapy on autobiographical memory in pathological ageing.

Science.gov (United States)

Melendez, Juan C; Torres, Marta; Redondo, Rita; Mayordomo, Teresa; Sales, Alicia

2017-08-01

The objective is to examine the effects of reminiscence therapy (RT) on total, episodic and semantic autobiographical memory in amnestic mild cognitive impairment (aMCI) and Alzheimer's disease (AD) groups, testing the effects of RT on different stages of autobiographical memory, and its effectiveness at follow-up. A sample composed of 43 aMCI (27 treatments, 16 controls) and 30 AD (15 treatments, 15 controls) subjects were evaluated with the Autobiographical Memory Interview (AMI) test. The RT consisted of 10 sessions lasting 60 minutes each. Both groups, aMCI and AD, showed significant effects on overall autobiographical memory; aMCI showed significant main effects on episodic and semantic autobiographical memory in the treatment group, increasing scores in both cases. For AD, significant effects were observed on autobiographical episodic memory, showing an increase in the treatment group from Time 1 to follow-up; semantic memory showed a decrease in the control group from Time 1 to follow-up. Results show that RT implementation and follow-up are effective in increasing autobiographical memory in subjects with aMCI and AD. © 2015 International Union of Psychological Science.
Anorexia Nervosa: Analysis of Trabecular Texture with CT.

Science.gov (United States)

Tabari, Azadeh; Torriani, Martin; Miller, Karen K; Klibanski, Anne; Kalra, Mannudeep K; Bredella, Miriam A

2017-04-01

Purpose To determine indexes of skeletal integrity by using computed tomographic (CT) trabecular texture analysis of the lumbar spine in patients with anorexia nervosa and normal-weight control subjects and to determine body composition predictors of trabecular texture. Materials and Methods This cross-sectional study was approved by the institutional review board and compliant with HIPAA. Written informed consent was obtained. The study included 30 women with anorexia nervosa (mean age ± standard deviation, 26 years ± 6) and 30 normal-weight age-matched women (control group). All participants underwent low-dose single-section quantitative CT of the L4 vertebral body with use of a calibration phantom. Trabecular texture analysis was performed by using software. Skewness (asymmetry of gray-level pixel distribution), kurtosis (pointiness of pixel distribution), entropy (inhomogeneity of pixel distribution), and mean value of positive pixels (MPP) were assessed. Bone mineral density and abdominal fat and paraspinal muscle areas were quantified with quantitative CT. Women with anorexia nervosa and normal-weight control subjects were compared by using the Student t test. Linear regression analyses were performed to determine associations between trabecular texture and body composition. Results Women with anorexia nervosa had higher skewness and kurtosis, lower MPP (P anorexia nervosa. Conclusion Patients with anorexia nervosa had increased skewness and kurtosis and decreased entropy and MPP compared with normal-weight control subjects. These parameters were associated with lowest lifetime weight and duration of amenorrhea, but there were no such associations with bone mineral density. These findings suggest that trabecular texture analysis might contribute information about bone health in anorexia nervosa that is independent of that provided with bone mineral density. © RSNA, 2016.
Perturbed Yukawa textures in the minimal seesaw model

Energy Technology Data Exchange (ETDEWEB)

Rink, Thomas; Schmitz, Kai [Max Planck Institute for Nuclear Physics (MPIK),69117 Heidelberg (Germany)

2017-03-29

We revisit the minimal seesaw model, i.e., the type-I seesaw mechanism involving only two right-handed neutrinos. This model represents an important minimal benchmark scenario for future experimental updates on neutrino oscillations. It features four real parameters that cannot be fixed by the current data: two CP-violating phases, δ and σ, as well as one complex parameter, z, that is experimentally inaccessible at low energies. The parameter z controls the structure of the neutrino Yukawa matrix at high energies, which is why it may be regarded as a label or index for all UV completions of the minimal seesaw model. The fact that z encompasses only two real degrees of freedom allows us to systematically scan the minimal seesaw model over all of its possible UV completions. In doing so, we address the following question: suppose δ and σ should be measured at particular values in the future — to what extent is one then still able to realize approximate textures in the neutrino Yukawa matrix? Our analysis, thus, generalizes previous studies of the minimal seesaw model based on the assumption of exact texture zeros. In particular, our study allows us to assess the theoretical uncertainty inherent to the common texture ansatz. One of our main results is that a normal light-neutrino mass hierarchy is, in fact, still consistent with a two-zero Yukawa texture, provided that the two texture zeros receive corrections at the level of O(10 %). While our numerical results pertain to the minimal seesaw model only, our general procedure appears to be applicable to other neutrino mass models as well.
High-Speed Rolling of AZ31 Magnesium Alloy Having Different Initial Textures

Science.gov (United States)

Onuki, Yusuke; Hara, Kenichiro; Utsunomiya, Hiroshi; Szpunar, Jerzy A.

2015-02-01

It is known that magnesium alloys can be rolled up to a large thickness reduction and develop a unique texture when the rolling speed is high (>1000 m/min). In order to understand the texture formation mechanism during high-strain-rate deformation, high-speed rolling of AZ31 magnesium alloy samples having different initial textures was conducted. The main components of the textures after the rolling were the RD-split basal, which consisted of 10°-20° inclining basal poles from the normal direction toward the rolling direction of the sheet, regardless of the different initial textures. With preheating at 473 K, all the samples were rolled without cracking while all were cracked when preheating was not applied. The optical micrographs and EBSD measurements showed a significant amount of twins and the cracks that developed along the shear bands consisted with laminated twins. Based on the texture simulation using the visco-plastic self-consistent model, it is concluded that the rapid development of the RD-split basal component from the initial basal alignment along the transverse direction was attributable to the tension twinning, The effect of the initial texture on the crack formation can be explained by the activation of the twinning system.
Magnetic signature surveillance of nuclear fuel

International Nuclear Information System (INIS)

Bernatowicz, H.; Schoenig, F.C.

1981-01-01

Typical nuclear fuel material contains tramp ferromagnetic particles of random size and distribution. Also, selected amounts of paramagnetic or ferromagnetic material can be added at random or at known positions in the fuel material. The fuel material in its non-magnetic container is scanned along its length by magnetic susceptibility detecting apparatus whereby susceptibility changes along its length are obtained and provide a unique signal waveform of the container of fuel material as a signature thereof. The output signature is stored. At subsequent times in its life the container is again scanned and respective signatures obtained which are compared with the initially obtained signature, any differences indicating alteration or tampering with the fuel material. If the fuel material includes a paramagnetic additive by taking two measurements along the container the effects thereof can be cancelled out. (author)
Extending ultra-short pulse laser texturing over large area

Energy Technology Data Exchange (ETDEWEB)

Mincuzzi, G., E-mail: girolamo.mincuzzi@alphanov.com; Gemini, L.; Faucon, M.; Kling, R.

2016-11-15

Highlights: • We carried out metal surface texturing (Ripples, micro grooves, Spikes) using a high power, high repetition rate, industrial, Ultra-short pulses laser. • Extremely Fast processing is shown (Laser Scan speed as high as 90 m/s) with a polygon scanner head. • Stainless steel surface blackening with Ultra-short pulses laser has been obtained with unprecedented scanspeed. • Full SEM surface characterization was carried out for all the different structures obtained. • Reflectance measurements were carried out to characterize surface reflectance. - Abstract: Surface texturing by Ultra-Short Pulses Laser (UPL) for industrial applications passes through the use of both fast beam scanning systems and high repetition rate, high average power P, UPL. Nevertheless unwanted thermal effects are expected when P exceeds some tens of W. An interesting strategy for a reliable heat management would consists in texturing with a low fluence values (slightly higher than the ablation threshold) and utilising a Polygon Scanner Heads delivering laser pulses with unrepeated speed. Here we show for the first time that with relatively low fluence it is possible over stainless steel, to obtain surface texturing by utilising a 2 MHz femtosecond laser jointly with a polygonal scanner head in a relatively low fluence regime (0.11 J cm{sup −2}). Different surface textures (Ripples, micro grooves and spikes) can be obtained varying the scan speed from 90 m s{sup −1} to 25 m s{sup −1}. In particular, spikes formation process has been shown and optimised at 25 m s{sup −1} and a full morphology characterization by SEM has been carried out. Reflectance measurements with integrating sphere are presented to compare reference surface with high scan rate textures. In the best case we show a black surface with reflectance value < 5%.

Electromigration-induced plasticity and texture in Cu interconnects

International Nuclear Information System (INIS)

Advanced Light Source; Tamura, Nobumichi; Budiman, A. S.; Hau-Riege, C.S.; Besser, P. R.; Marathe, A.; Joo, Y.-C.; Tamura, N.; Patel, J. R.; Nix, W. D.

2007-01-01

Plastic deformation has been observed in damascene Cu interconnect test structures during an in-situ electromigration experiment and before the onset of visible microstructural damage (ie. voiding) using a synchrotron technique of white beam X-ray microdiffraction. We show here that the extent of this electromigration-induced plasticity is dependent on the texture of the Cu grains in the line. In lines with strong textures, the extent of plastic deformation is found to be relatively large compared to our plasticity results in the previous study [1] using another set of Cu lines with weaker textures. This is consistent with our earlier observation that the occurrence of plastic deformation in a given grain can be strongly correlated with the availability of a direction of the crystal in the proximity of the direction of the electron flow in the line (within an angle of 10 o ). In out-of-plane oriented grains in a damascene interconnect scheme, the crystal plane facing the sidewall tends to be a {110} plane,[2-4] so as to minimize interfacial energy. Therefore, it is deterministic rather than probabilistic that the grains will have a direction nearly parallel to the direction of electron flow. Thus, strong textures lead to more plasticity, as we observe
Electromigration-induced Plasticity and Texture in Cu Interconnects

Science.gov (United States)

Budiman, A. S.; Hau-Riege, C. S.; Besser, P. R.; Marathe, A.; Joo, Y.-C.; Tamura, N.; Patel, J. R.; Nix, W. D.

2007-10-01

Plastic deformation has been observed in damascene Cu interconnect test structures during an in-situ electromigration experiment and before the onset of visible microstructural damage (ie. voiding) using a synchrotron technique of white beam X-ray microdiffraction. We show here that the extent of this electromigration-induced plasticity is dependent on the texture of the Cu grains in the line. In lines with strong textures, the extent of plastic deformation is found to be relatively large compared to our plasticity results in the previous study[1] using another set of Cu lines with weaker textures. This is consistent with our earlier observation that the occurrence of plastic deformation in a given grain can be strongly correlated with the availability of a direction of the crystal in the proximity of the direction of the electron flow in the line (within an angle of 10°). In out-of-plane oriented grains in a damascene interconnect scheme, the crystal plane facing the sidewall tends to be a {110} plane,[2-4] so as to minimize interfacial energy. Therefore, it is deterministic rather than probabilistic that the grains will have a direction nearly parallel to the direction of electron flow. Thus, strong textures lead to more plasticity, as we observe.
Laser surface textured titanium alloy (Ti–6Al–4V): Part 1 – Surface characterization

Energy Technology Data Exchange (ETDEWEB)

Pfleging, Wilhelm [Karlsruhe Institute of Technology, IAM-AWP, P.O. Box 3640, 76021 Karlsruhe (Germany); Karlsruhe Nano Micro Facility, H.-von-Helmholtz-Pl. 1, 76344 Egg.-Leopoldshafen (Germany); Kumari, Renu [Department of Metal. and Maters. Eng., I. I. T. Kharagpur, WB 721302 (India); Besser, Heino [Karlsruhe Institute of Technology, IAM-AWP, P.O. Box 3640, 76021 Karlsruhe (Germany); Scharnweber, Tim [Karlsruhe Institute of Technology, IBG-1, P.O. Box 3640, 76021 Karlsruhe (Germany); Majumdar, Jyotsna Dutta, E-mail: jyotsna@metal.iitkgp.ernet.in [Department of Metal. and Maters. Eng., I. I. T. Kharagpur, WB 721302 (India)

2015-11-15

Highlights: • Texturing of Ti–6Al–4V with linear and dimple patterns are developed with ArF laser. • Linear textures have width of 25 μm and are at an interval of 20 μm. • Dimple textures are equi-spaced and have a diameter of 60 μm. • Significant refinement of microstructure in textured zone as compared to substrate. • Increased wettability of the textured surface against simulated body fluid. - Abstract: In the present study, a detailed study of the characterization of laser-surface textured titanium alloy (Ti–6Al–4V) with line and dimple geometry developed by using an ArF excimer laser operating at a wavelength of 193 nm with a pulse length of 5 ns is undertaken. The characterization of the textured surface (both the top surface and cross section) is carried out by scanning electron microscopy, electron back scattered diffraction (EBSD) technique and X-ray diffraction techniques. There is refinement of microstructure along with presence of titanium oxides (rutile, anatase and few Ti{sub 2}O{sub 3} phase) in the textured surface as compared to as-received one. The area fractions of linear texture and dimple texture measured by image analysis software are 45% and 20%, respectively. The wettability is increased after laser texturing. The total surface energy is decreased due to linear (29.6 mN/m) texturing and increased due to dimple (67.6 mN/m) texturing as compared to as-received Ti–6Al–4V (37 mN/m). The effect of polar component is more in influencing the surface energy of textured surface.
Laser surface textured titanium alloy (Ti–6Al–4V): Part 1 – Surface characterization

International Nuclear Information System (INIS)

Pfleging, Wilhelm; Kumari, Renu; Besser, Heino; Scharnweber, Tim; Majumdar, Jyotsna Dutta

2015-01-01

Highlights: • Texturing of Ti–6Al–4V with linear and dimple patterns are developed with ArF laser. • Linear textures have width of 25 μm and are at an interval of 20 μm. • Dimple textures are equi-spaced and have a diameter of 60 μm. • Significant refinement of microstructure in textured zone as compared to substrate. • Increased wettability of the textured surface against simulated body fluid. - Abstract: In the present study, a detailed study of the characterization of laser-surface textured titanium alloy (Ti–6Al–4V) with line and dimple geometry developed by using an ArF excimer laser operating at a wavelength of 193 nm with a pulse length of 5 ns is undertaken. The characterization of the textured surface (both the top surface and cross section) is carried out by scanning electron microscopy, electron back scattered diffraction (EBSD) technique and X-ray diffraction techniques. There is refinement of microstructure along with presence of titanium oxides (rutile, anatase and few Ti_2O_3 phase) in the textured surface as compared to as-received one. The area fractions of linear texture and dimple texture measured by image analysis software are 45% and 20%, respectively. The wettability is increased after laser texturing. The total surface energy is decreased due to linear (29.6 mN/m) texturing and increased due to dimple (67.6 mN/m) texturing as compared to as-received Ti–6Al–4V (37 mN/m). The effect of polar component is more in influencing the surface energy of textured surface.
Growth and characterization of textured well-faceted ZnO on planar Si(100, planar Si(111, and textured Si(100 substrates for solar cell applications

Directory of Open Access Journals (Sweden)

Chin-Yi Tsai

2017-09-01

Full Text Available In this work, textured, well-faceted ZnO materials grown on planar Si(100, planar Si(111, and textured Si(100 substrates by low-pressure chemical vapor deposition (LPCVD were analyzed by X-ray diffraction (XRD, scanning electron microscopy (SEM, atomic force microscopy (AFM, and cathode luminescence (CL measurements. The results show that ZnO grown on planar Si(100, planar Si(111, and textured Si(100 substrates favor the growth of ZnO(110 ridge-like, ZnO(002 pyramid-like, and ZnO(101 pyramidal-tip structures, respectively. This could be attributed to the constraints of the lattice mismatch between the ZnO and Si unit cells. The average grain size of ZnO on the planar Si(100 substrate is slightly larger than that on the planar Si(111 substrate, while both of them are much larger than that on the textured Si(100 substrate. The average grain sizes (about 10–50 nm of the ZnO grown on the different silicon substrates decreases with the increase of their strains. These results are shown to strongly correlate with the results from the SEM, AFM, and CL as well. The reflectance spectra of these three samples show that the antireflection function provided by theses samples mostly results from the nanometer-scaled texture of the ZnO films, while the micrometer-scaled texture of the Si substrate has a limited contribution. The results of this work provide important information for optimized growth of textured and well-faceted ZnO grown on wafer-based silicon solar cells and can be utilized for efficiency enhancement and optimization of device materials and structures, such as heterojunction with intrinsic thin layer (HIT solar cells.
SURFACE TEXTURE ANALYSIS FOR FUNCTIONALITY CONTROL

DEFF Research Database (Denmark)

De Chiffre, Leonardo; Andreasen, Jan Lasson; Tosello, Guido

This document is used in connection with three exercises of 3 hours duration as a part of the course VISION ONLINE – One week course on Precision & Nanometrology. The exercises concern surface texture analysis for functionality control, in connection with three different case stories. This docume...... contains a short description of each case story, 3-D roughness parameters analysis and relation with the product’s functionality.......This document is used in connection with three exercises of 3 hours duration as a part of the course VISION ONLINE – One week course on Precision & Nanometrology. The exercises concern surface texture analysis for functionality control, in connection with three different case stories. This document...
Dropwise condensation on inclined textured surfaces

CERN Document Server

Khandekar, Sameer

2014-01-01

Dropwise Condensation on Textured Surfaces presents a holistic framework for understanding dropwise condensation through mathematical modeling and meaningful experiments. The book presents a review of the subject required to build up models as well as to design experiments. Emphasis is placed on the effect of physical and chemical texturing and their effect on the bulk transport phenomena. Application of the model to metal vapor condensation is of special interest. The unique behavior of liquid metals, with their low Prandtl number and high surface tension, is also discussed. The model predicts instantaneous drop size distribution for a given level of substrate subcooling and derives local as well as spatio-temporally averaged heat transfer rates and wall shear stress.
Post tsunami rebuilding of beaches and the texture of sediments

Digital Repository Service at National Institute of Oceanography (India)

Loveson, V.J.; Gujar, A.R.; Rajamanickam, G.V.; Chandrasekar, N.; Manickaraj, D.S.; Chandrasekaran, R.; Chaturvedi, S.K.; Mahesh, R.; Josephine, P.J.; Deepa, V.; Sudha, V.; Sunderasen, D.

and textural statistic studies. In view of the presence tsunami in between, the beach sand composition and texture have been drastically changed, the studies on beach re-building effort has been initiated in continuing the beach sand sample collection to 2006...
Role of a texture gradient in the perception of relative size.

Science.gov (United States)

Tozawa, Junko

2010-01-01

Two theories regarding the role of a texture gradient in the perception of the relative size of objects are compared. Relational theory states that relative size is directly specified by the projective ratio of the numbers of texture elements spanned by objects. Distance calibration theory assumes that relative size is a product of visual angle and distance, once the distance is specified by the texture. Experiment 1 involved three variables: background (no texture, texture gradient patterns), the ratio of heights of the comparison stimulus to a standard (three levels), and angular vertical separation of the standard stimulus below the horizon (two levels). The effect of the retinal length of the comparison stimulus was examined in experiment 2. In both experiments, participants judged both the apparent size and distance of a comparison stimulus relative to a standard stimulus. Results suggest that the cues selected by observers to judge relative size were to some degree different from those used to judge relative distance. Relative size was strongly affected by a texture gradient and the retinal length of a comparison stimulus whereas relative distance perception was affected by relative height. When dominant cues that specify size are different from those which specify distance, relational theory might provide a better account of relative size perception than distance calibration theory.
An Arbitrated Quantum Signature Scheme without Entanglement*

International Nuclear Information System (INIS)

Li Hui-Ran; Luo Ming-Xing; Peng Dai-Yuan; Wang Xiao-Jun

2017-01-01

Several quantum signature schemes are recently proposed to realize secure signatures of quantum or classical messages. Arbitrated quantum signature as one nontrivial scheme has attracted great interests because of its usefulness and efficiency. Unfortunately, previous schemes cannot against Trojan horse attack and DoS attack and lack of the unforgeability and the non-repudiation. In this paper, we propose an improved arbitrated quantum signature to address these secure issues with the honesty arbitrator. Our scheme takes use of qubit states not entanglements. More importantly, the qubit scheme can achieve the unforgeability and the non-repudiation. Our scheme is also secure for other known quantum attacks . (paper)
X-ray elastic constants in textured Zr-base materials

International Nuclear Information System (INIS)

Ortiz, M.; Pochettino, A.A.; Lebrun, J.L.; Maeder, G.

1993-01-01

A general method for the calculation of the X-ray elastic constants (XREC) for textured hexagonal close-packed (hcp) materials was developed by using the orientation distribution function (ODF) and the Reuss hypothesis. This method was applied to textured zirconium (Zr) sheets and zircaloy 4 (Zry 4) extruded tubes. For these samples, where the elastic anisotropy is not very strong, an 'isotropic approximation' method is proposed using the ODF data. In that case, the classical XREC 1/2S 2 and S, values are calculated and experimentally verified for (10 bar 14) diffracting planes. Theoretical XREC values are also given for different (hkil) that could be chosen according to the experimental conditions, considering texture effects on diffracting peak intensities
Signature-based store checking buffer

Science.gov (United States)

Sridharan, Vilas; Gurumurthi, Sudhanva

2015-06-02

A system and method for optimizing redundant output verification, are provided. A hardware-based store fingerprint buffer receives multiple instances of output from multiple instances of computation. The store fingerprint buffer generates a signature from the content included in the multiple instances of output. When a barrier is reached, the store fingerprint buffer uses the signature to verify the content is error-free.
Neutral signature Walker-VSI metrics

International Nuclear Information System (INIS)

Coley, A; McNutt, D; Musoke, N; Brooks, D; Hervik, S

2014-01-01

We will construct explicit examples of four-dimensional neutral signature Walker (but not necessarily degenerate Kundt) spaces for which all of the polynomial scalar curvature invariants vanish. We then investigate the properties of some particular subclasses of Ricci flat spaces. We also briefly describe some four-dimensional neutral signature Einstein spaces for which all of the polynomial scalar curvature invariants are constant. (paper)
An interpretation of signature inversion

International Nuclear Information System (INIS)

Onishi, Naoki; Tajima, Naoki

1988-01-01

An interpretation in terms of the cranking model is presented to explain why signature inversion occurs for positive γ of the axially asymmetric deformation parameter and emerges into specific orbitals. By introducing a continuous variable, the eigenvalue equation can be reduced to a one dimensional Schroedinger equation by means of which one can easily understand the cause of signature inversion. (author)
Acoustic Signature Monitoring and Management of Naval Platforms

NARCIS (Netherlands)

Basten, T.G.H.; Jong, C.A.F. de; Graafland, F.; Hof, J. van 't

2015-01-01

Acoustic signatures make naval platforms susceptible to detection by threat sensors. The variable operational conditions and lifespan of a platform cause variations in the acoustic signature. To deal with these variations, a real time signature monitoring capability is being developed, with advisory
Classification of high resolution imagery based on fusion of multiscale texture features

International Nuclear Information System (INIS)

Liu, Jinxiu; Liu, Huiping; Lv, Ying; Xue, Xiaojuan

2014-01-01

In high resolution data classification process, combining texture features with spectral bands can effectively improve the classification accuracy. However, the window size which is difficult to choose is regarded as an important factor influencing overall classification accuracy in textural classification and current approaches to image texture analysis only depend on a single moving window which ignores different scale features of various land cover types. In this paper, we propose a new method based on the fusion of multiscale texture features to overcome these problems. The main steps in new method include the classification of fixed window size spectral/textural images from 3×3 to 15×15 and comparison of all the posterior possibility values for every pixel, as a result the biggest probability value is given to the pixel and the pixel belongs to a certain land cover type automatically. The proposed approach is tested on University of Pavia ROSIS data. The results indicate that the new method improve the classification accuracy compared to results of methods based on fixed window size textural classification
Inline inspection of textured plastics surfaces

Science.gov (United States)

Michaeli, Walter; Berdel, Klaus

2011-02-01

This article focuses on the inspection of plastics web materials exhibiting irregular textures such as imitation wood or leather. They are produced in a continuous process at high speed. In this process, various defects occur sporadically. However, current inspection systems for plastics surfaces are able to inspect unstructured products or products with regular, i.e., highly periodic, textures, only. The proposed inspection algorithm uses the local binary pattern operator for texture feature extraction. For classification, semisupervised as well as supervised approaches are used. A simple concept for semisupervised classification is presented and applied for defect detection. The resulting defect-maps are presented to the operator. He assigns class labels that are used to train the supervised classifier in order to distinguish between different defect types. A concept for parallelization is presented allowing the efficient use of standard multicore processor PC hardware. Experiments with images of a typical product acquired in an industrial setting show a detection rate of 97% while achieving a false alarm rate below 1%. Real-time tests show that defects can be reliably detected even at haul-off speeds of 30 m/min. Further applications of the presented concept can be found in the inspection of other materials.
Relation between coal rank, char reactivity, textural properties and NO emissions

Energy Technology Data Exchange (ETDEWEB)

Arenillas, A.; Rubiera, F.; Parra, J.B.; Pis, J.J. [Instituto Nacional del Carbon, Oviedo (Spain)

1999-07-01

A low volatile bituminous coal was pyrolysed at different heating rates to produce chars with different textural properties. There was a linear relationship between char reactivity and active surface area. The effect of coal rank on coal char textural properties was studied using a range of bituminous coals. The influence of textural properties and reactivity on NO emissions, and on the heterogeneous reduction of NO is discussed. 6 refs., 2 figs., 2 tabs.
Influence of surface roughness on the friction property of textured surface

OpenAIRE

Yuankai Zhou; Hua Zhu; Wenqian Zhang; Xue Zuo; Yan Li; Jianhua Yang

2015-01-01

In contrast with dimple textures, surface roughness is a texture at the micro-scale, essentially which will influence the load-bearing capacity of lubricant film. The numerical simulation was carried out to investigate the influence of surface roughness on friction property of textured surface. The lubricant film pressure was obtained using the method of computational fluid dynamics according to geometric model of round dimple, and the renormalization-group k–ε turbulent model was adopted in ...
Using multimedia information and communication technology (ICT) to provide added value to reminiscence therapy for people with dementia : Lessons learned from three field studies.

Science.gov (United States)

Bejan, Alexander; Gündogdu, Ramazan; Butz, Katherina; Müller, Nadine; Kunze, Christophe; König, Peter

2018-01-01

In the care of people with dementia (PwD), occupational therapies and activities aiming at maintaining the quality of life of PwD, such as reminiscence therapy (RT), are taking on a more and more important role. Information and communication technology (ICT) has the potential to improve and to facilitate RT by facilitating access to and selection of biographical information and related contents or by providing novel multimodal interaction forms to trigger memories; however, interactive multimedia technology is barely used in practice. This article presents three exploratory field studies that evaluated different aspects of RT technology use for PwD in care homes, including the utilization of online movie databases, interactive surface touch computers as well as natural user interfaces allowing gestures and haptic interaction. In these studies, the usage of prototype systems was observed in occupational sessions by 5, 12 and 16 PwD. The results indicate positive effects of technology use, e. g. in the form of verbally elicited reminiscence statements, expressed joy and playful interaction. Lessons learned for the design of technology-based RT interventions are presented and discussed.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.