WorldWideScience

Sample records for textile dam protection

  1. Textiles for protection against microorganism

    Science.gov (United States)

    Sauperl, O.

    2016-04-01

    Concerning micro-organisms such as bacteria, viruses and fungi, there is a huge progress in the development of textile materials and procedures which should effectively protect against these various pathogens. In this sense there is especially problematic hospital environment, where it is necessary to take into account properly designed textile material which, when good selected and composed, act as a good barrier against transfer of micro-organisms through material mainly in its wet state. Respect to this it is necessary to be familiar with the rules regarding selection of the input material, the choice of proper yarn construction, the choice of the proper weaving mode, the rules regarding selection of antimicrobial-active compound suitable for (eco-friendly) treatment, and the choice of the most appropriate test method by which it is possible objectively to conclude on the reduction of selected microorganism. As is well known, fabrics are three-dimensional structures with void and non-void areas. Therefore, the physical-chemical properties of the textile material/fabric, the surface characteristics together with the shape of microorganism, and the carriers' characteristics contribute to control the transfer of microorganism through textile material. Therefore, careful planning of textile materials and treatment procedure with the compound which is able to reduce micro-organism satisfactory is particularly important, especially due to the fact that in hospital environment population with impaired immune system is mainly presented.

  2. Auxiliaries for the textile industry and environmental protection

    Directory of Open Access Journals (Sweden)

    Sanda VISAN

    2010-06-01

    Full Text Available The textile industry is an industrial field that affects the environment, from the plant growth until the production process. The obtaining of environmental licence for Romanian companies that produce textile products is related to elaboration and implementation of a modern system for an environmental management, that consist in utilization of ecological technologies for finishing, in diminution the water and energy consumption, cleaning of waste waters, reutilization of cleaned waters, sustainable management of wastes. In this study, the surfactant categories used in the textile industry that fulfil the conditions of environment protection, are presented. Some exemplifications were made involving the existing surfactants in Romanian textile industry, obtained from both domestic and external production. Also, some recommendation are suggested regarding the utilization of surfactants manufactured from either vegetal oils or chemical/petrochemical wastes, with similar properties as those from import having decreased prices an that affect as small as possible the environment.

  3. A REVIEW ON TEXTILES IN SPACE PROTECTION EQUIPMENTS

    Directory of Open Access Journals (Sweden)

    SUNTER EROGLU Nilsen

    2017-05-01

    Full Text Available Astronauts need the lander for decelerate and bridle the speed when they land on the space surface slowly. This lander could be controlled velocity magnitude in any direction or orientation and provide protection. The landers consist of airbags and parachutes. The airbag is a type of vehicle safety device, have a soft cushioning and is an occupant restraint system. The parachute provides to slow the motion of an object through an atmosphere by the hauling. Space protection equipments must have some properties because of astronaut’s entry, descend and landing in safely. Textiles in airbags provide these properties especially which are light weight, low gas permeability, high strength, low cost, low temperature flexibility and low coefficient of friction. For textiles in parachutes must have properties such as smooth, porosity, air permeability, high strength, cost-effective, stability light weight and good in drag and lift. Airbags and parachutes in space protection equipment’s are improved in systems provide easy stability. Recently, inflatable technologies for space protection equipments plays a fundamental role in building re-entry capsule. It can be performed a variety of pre-flight analyses to ensure the success of the tests of protection systems from day to day. In this review, space protection systems, their textile materials and properties, their advantages and disadvantages are presented.

  4. Light Conversion and Scattering in UV Protective Textiles

    Directory of Open Access Journals (Sweden)

    Grancarić Ana Marija

    2014-12-01

    Full Text Available The primary cause of skin cancer is believed to be a long exposure to solar ultraviolet radiation (UV-R crossed with the amount of skin pigmentation in the population. It is believed that in childhood and adolescence 80% of UV-R gets absorbed, whilst in the remaining 20% gets absorbed later in the lifetime. This suggests that proper and early photoprotection may reduce the risk of subsequent occurrence of skin cancer. Textile and clothing are the most suitable interface between environment and human body. It can show UV protection, but in most cases it does not provide full sun screening properties. UV protection ability highly depends on large number of factors such as type of fibre, fabric surface and construction, type and concentration of dyestuff, fluorescent whitening agent (FWA, UV-B protective agents, as well as nanoparticles, if applied. Based on electronically excited state by energy of UV-R (usually 340-370 nm, the molecules of FWAs show the phenomenon of fluorescence giving to white textiles high whiteness of outstanding brightness by reemitting the energy at the blue region (typically 420-470 nm of the spectrum. By absorbing UV-A radiation, optical brightened fabrics transform this radiation into blue fluorescence, which leads to better UV protection. Natural zeolites are rock-forming, microporous silicate minerals. Applied as nanoparticles to textile surface, it scatters the UV-R resulting in lower UV-A and UV-B transmission. If applied with other UV absorbing agents, e.g. FWAs, synergistic effect occurs. Silicones are inert, synthetic compounds with a variety of forms and uses. It provides a unique soft touch, is very resistant to washing and improves the property of fabric to protect against UV radiation. Therefore, the UV protective properties of cotton fabric achieved by light conversion and scattering was researched in this paper. For that purpose, the stilbene-derived FWAs were applied on cotton fabric in wide concentration

  5. Simulation of Soil Moisture Development in Flood Protecting Earth Dams

    Science.gov (United States)

    Cislerova, M.; Zumr, D.; Dusek, J.; Vogel, T.

    2007-12-01

    Extreme floods represent an increased risk for urban areas and agriculture. Time to time the protective earth dams are destroyed by a suddenly increased amount of water with destroing or even cathastrophic consequences. A numerical study of the soil moisture development within the earth body during the flood is simulated under a selection of boundary conditions. Several soil materials are considered. Simulations are performed firstly for homogeneous materials using the 2D single domain approach, in the second step the dual permeability simulations are done assuming inhomogeneities in the construction which may lead to the preferential flow. Results for saturated as well as for unsaturated part of the dam are analyzed. Using the appropriate simulation model may help to design safer flood dams and evaluate the reason of possible failures to prevent future disasters. The research has been performed in the frame of research project VZ 04 CEZ MSM 6840770005.

  6. Tough Textiles Protect Payloads and Public Safety Officers

    Science.gov (United States)

    2009-01-01

    In order to create the Mars Pathfinder s mission-critical airbags in the 1990s, NASA s Jet Propulsion Laboratory collaborated with New Ipswich, New Hampshire s Warwick Mills Inc. to weave multi-layer textiles for the airbags for both Pathfinder and the Mars Exploration Rovers. Warwick Mills applied techniques from the collaboration to its puncture- and impact-resistant TurtleSkin product line. The company's metal flex armor (MFA) vests offer stab protection comparable with rigid steel plates and over 50,000 of the vests have sold. The SoftPlate body armor offers protection from handgun bullets, and like the MFA, is designed to be more comfortable than rigid vests. International public safety and military customers are now benefiting from the TurtleSkin products.

  7. Dams

    Data.gov (United States)

    Vermont Center for Geographic Information — This dataset �is generated from from the Vermont Dam Inventory (VDI). The VDI is managed by the VT DEC's Dam Safety and Hydrology Section and contains information...

  8. NANOCOATING PROCESS FOR TEXTILES APPLICATIONS AND WOOD PROTECTION

    Directory of Open Access Journals (Sweden)

    NICULESCU Claudia

    2014-05-01

    Full Text Available This paper presents the research results obtained in ERA NET MANUCOAT project, coordinated by INCDTP in collaboration with the following partners: INCDMNR-IMNR, SC MGM STAR CONSTRUCT SRL –Romania and IRIS-Spain. The objective of the research was to develop and obtain textile and wood surfaces with self-cleaning, photo catalytic, antibacterial and antifungal properties. An innovative method of manufacturing nanoparticles by hydrothermal process in a single step without any further heat treatment and controlled stoichiometry, tested spray coating technology (sputtering were developed. Full characterization of nanostructured powders in terms of chemical, physical, structural, thermal and technological characteristics was performed. The most important features to be considered in the treatment of wood by sputtering in order to deposit thin layers of TiO2 NPs or TiO2/Ag as the humidity should be below 12% and the maximum roughness P150, depending on the species of wood. Future works envisage optimizing the existing sputtering systems for pilot stage, in order to make nanoparticles deposits on large areas of textile and wood. The results of the research are photocatalytic textiles for surgical gowns, operative fields, hospital bed sheets and curtains and drapes for public spaces.

  9. Protection Parameters against the Cracks by the Method of Volume Compensation Dam

    Directory of Open Access Journals (Sweden)

    Bulatov Georgiy

    2016-01-01

    Full Text Available This article provides estimates the parameters of protection from cracking dam due to volume compensation method. This article discusses the method of compensation dam volume. This method allows calculating the settings of security causing cracks the dam. Presents graphs of horizontal deformations of elongation calculated surface along the length of the construction and in time. Showing horizontal stress distribution diagram in the ground around the pile in plan and in section. Given all the necessary formulas for the method of compensation of the dam volume.

  10. Light Conversion and Scattering in UV Protective Textiles

    OpenAIRE

    Grancarić Ana Marija; Tarbuk Anita; Botteri Lea

    2014-01-01

    The primary cause of skin cancer is believed to be a long exposure to solar ultraviolet radiation (UV-R) crossed with the amount of skin pigmentation in the population. It is believed that in childhood and adolescence 80% of UV-R gets absorbed, whilst in the remaining 20% gets absorbed later in the lifetime. This suggests that proper and early photoprotection may reduce the risk of subsequent occurrence of skin cancer. Textile and clothing are the most suitable interface between environment a...

  11. Textiles for protection at the workplace : Developments in textiles for a safer working environment

    NARCIS (Netherlands)

    Bottenberg, E. (Eliza); Brinks, G.J. (Ger); Luiken, A. (Anton)

    2011-01-01

    This report was produced within the framework of the RAAK PRP project ‘Veiligheid op de werkvloer’. Personal protective equipment (PPE) is used on a daily basis by millions of people all over the EU, voluntarily or as a result of EU legislation. In this report we deal specifically with

  12. Production of a textile reinforced concrete protective layers with non-woven polypropylene fabric

    Science.gov (United States)

    Žák, J.; Štemberk, P.; Vodička, J.

    2017-09-01

    Textile concrete with nonwoven polypropylene fabric can be used for protective layers of reinforced concrete structures, reducing the thickness of the cover layer or reducing the water penetration rate into the structure. The material consists of cement matrix with finegrained aggregate and nonwoven textile reinforcement. The maximum grain size of the mixture suitable for the nonwoven textile infiltration is 0.25 mm. The interlayer contains larger aggregates and short fibers. Tensile loading causes a large amount of microcracks in the material. The material can withstand strain over 25% without collapsing. Increased quality and water-cement ratio reduction was achieved using the plasticizers and distribution of the mixture into a fabric using a vibrating trowel. It is possible to make flat plates and even curved structures from this material. Larger curvatures of structures should be solved by cutting and overlapping the fabric. Small curvatures can be solved within the deformability of the fabric. Proper infiltration of the cement mixture into the fabric is the most important task in producing this material.

  13. Protection against colibacillosis in neonatal piglets by immunization of dams with procholeragenoid.

    Science.gov (United States)

    Fürer, E; Cryz, S J; Dorner, F; Nicolet, J; Wanner, M; Germanier, R

    1982-03-01

    Protection against colibacillosis in neonatal piglets was obtained by immunization of pregnant dams with procholeragenoid. Procholeragenoid is a stable high-molecular-weight aggregate of cholera toxin formed during the heating of cholera toxin. Procholeragenoid retained approximately 1% of the toxicity of native toxin as determined in the rabbit ileal loop and Y-1 adrenal cell assays and 5% of the activity in the rabbit skin assay. Immunization of pregnant dams with 50 micrograms of procholeragenoid 5 and 2 weeks before the expected delivery date elicited high titers of antitoxic immunoglobulin G and toxin-neutralizing antibody in both the colostrum and serum. In three independent field trials, immunization with procholeragenoid resulted in a substantial decrease in diarrhea (73% in controls versus 11% in immunized) and death (4.7% in controls versus 0.77% in immunized) in neonatal piglets. The protection rate in the immunized population was approximately 85% for both diarrhea and death. In the following gestation period, reimmunization of dams with a single dose of procholeragenoid (50 micrograms) 2 weeks before delivery elicited titers of antitoxic immunoglobulin G and toxin-neutralizing antibody comparable to those obtained during the primary immunization. The death rate in neonatal piglets (0.86%) was comparable to that seen after immunization during the first gestation period (0.77%). These results indicate that substantial protection of neonatal piglets against colibacillosis can be obtained by immunization of dams with procholeragenoid. Protection was found to be based solely on antitoxic immunity.

  14. New advances in protection against solar ultraviolet radiation in textiles for summer clothing.

    Science.gov (United States)

    Aguilera, José; de Gálvez, María Victoria; Sánchez-Roldán, Cristina; Herrera-Ceballos, Enrique

    2014-01-01

    Clothing is considered one of the most important tools for photoprotection against harmful solar ultraviolet radiation (UVR). The standard for sun-protective clothing is based on erythema despite other biological effects of UVR on the skin. We analyzed the potential protection against UVR in fabrics destined for summer clothing based on several action spectra. We examined 50 garments classified by type of fabric composition, structure of the fiber yarn and color. The ultraviolet protection factor was calculated based on fabric ultraviolet transmittance corrected for erythema according to the EU standard E-13758 as well as the UVA transmittance of fabrics. UVR protection was also analyzed in base of different action spectra as for previtamin D3, nonmelanoma skin cancer, photoimmunosuppression and photoaging. Most knitted fabrics used for sports T-shirts offered excellent ratings for ultraviolet protection while normal shirts showed very low ratings, particularly against photoaging. The cover is the most influential variable in fabric photoprotection, having an exponential relationship with the UPF. The relation between cover and UVA protection was linearly negative. Information about ultraviolet protection in textiles used for summer clothing should be included in labeling as some types of fabrics, especially those used for shirts, offer very low UVR protection. © 2014 The American Society of Photobiology.

  15. Improvement of UV Protection Properties of the Textile from Natural Fibres by the Sol-gel Method

    Science.gov (United States)

    Vihodceva, S.; Kukle, S.

    2013-12-01

    In this research pure cotton textile was successfully modified by zinc oxide nanosol prepared by the sol-gel method. The cotton fabric was dipped in the nanosol solution for 10 minutes, dried at 90 °C for 10 minutes with further thermal post-treatment at 120 °C, 140 °C or 160 °C for 2 minutes. Comparison of coating of samples prepared using different thermal post-treatments was made. Before and after laundering tests ultraviolet protective properties of the textile samples were determined according to the standards, results show that textiles after treatment with nanosol have excellent ultraviolet protection properties, as well treated samples after laundering tests (50 washing-drying cycles) still provide excellent ultraviolet protection. Analyses based on the scanning electron microscopy and spectrophotometer measurements show that obtained textile coatings are distributed evenly, not only on the surface of yarns but in the depth of textile material as well, and are resistant to exploitation process that indicates about very good adhesion between the coating and the fabric surface.

  16. Improvement of UV Protection Properties of the Textile from Natural Fibres by the Sol-Gel Method

    OpenAIRE

    Vihodceva, S; Kukle, S

    2013-01-01

    In this research pure cotton textile has been modified by the sol-gel technology to implement zinc oxide nanolevel coating on textile surface to ensure ultraviolet (UV) radiation protection. One of the advantages of this method is the possibility to obtain thin layers on various materials, as well as the sol-gel layers can cover all fibres with enough high adhesion. Comparison of coatings of samples prepared using different concentrations of TEOS in nano-sols and thermal post-treatment of sam...

  17. The impact of different types of textile liners used in protective footwear on the subjective sensations of firefighters.

    Science.gov (United States)

    Irzmańska, Emilia

    2015-03-01

    The paper presents ergonomic evaluation of footwear used with three types of textile liners differing in terms of design and material composition. Two novel textile composite liners with enhanced hygienic properties were compared with a standard liner used in firefighter boots. The study involved 45 healthy firefighters from fire and rescue units who wore protective footwear with one of the three types of liners. The study was conducted in a laboratory under a normal atmosphere. The ergonomic properties of the protective footwear and liners were evaluated according to the standard EN ISO 20344:2012 as well as using an additional questionnaire concerning the thermal and moisture sensations experienced while wearing the footwear. The study was conducted on a much larger group of subjects (45) than that required by the ISO standard (3) to increase the reliability of subjective evaluations. Some statistically significant differences were found between the different types of textile liners used in firefighter boots. It was confirmed that the ergonomic properties of protective footwear worn in the workplace may be improved by the use of appropriate textile components. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  18. Na-noparticles of activated natural zeolite on textiles for protection and therapy

    Directory of Open Access Journals (Sweden)

    Ivančica Kovaček

    2009-10-01

    Full Text Available Activated natural zeolite clinoptilolite is microporous hydrated aluminosilicates crystals with well-defined structures containing AlO4 and SiO4 tetrahedral linked through the common oxygen atoms. It is to point out that zeolites act as strong adsorbents and ion-exchangers but having many other useful properties. Due to its cationexchange ability, zeolites have catalytic properties and, for that, multiple uses in medicine and industry, agriculture, water purification and detergents. Zeolites are nontoxic substance, excellent for UVR and microbes protection, for proteins and small molecules such as glucose adsorption. In this paper its positive effect on the metabolism of living organisms and its anticancerogenic, antiviral, antimetastatic and antioxidant effect. The activity of natural zeolite as natural immunostimulator was presented as well as its help in healing wounds. Therefore, the present paper is an attempt to modify cotton (by mercerization and polyester (by alkaline hydrolysis fabrics for summer clothing with addition of natural zeolite nanoparticles for achieving UV and antibacterial protective textiles

  19. Libby/Hungry Horse Dams Wildlife Mitigation Habitat Protection : Interim Report.

    Energy Technology Data Exchange (ETDEWEB)

    Wood, Marilyn

    1991-04-01

    The Columbia River Basin Fish and Wildlife Program identified mitigation goals for Hungry Horse and Libby dams (1987). Specific programs goals included: (1) protect and/or enhance 4565 acres of wetland habitat in the Flathead Valley; (2) protect 2462 acres of prairie habitat within the vicinity of the Tobacco Plains Columbian sharp-tailed grouse; (3) protect 8590 acres riparian habitat in northwest Montana for grizzly and black bears; and (4) protect 11,500 acres of terrestrial furbearer habitat through cooperative agreements with state and federal agencies and private landowners. The purpose of this project is to continue to develop and obtain information necessary to evaluate and implement specific wildlife habitat protection actions in northwestern Montana. This report summarizes project work completed between May 1, 1990, and December 31, 1990. There were three primary project objectives during this time: obtain specific information necessary to develop the mitigation program for Columbian sharp-tailed grouse; continue efforts necessary to develop, refine, and coordinate the mitigation programs for waterfowl/wetlands and grizzly/black bears; determine the opportunity and appropriate strategies for protecting terrestrial furbearer habitat by lease or management agreements on state, federal and private lands. 19 refs., 1 tab.

  20. Granular jump properties for the design of protection dams against snow avalanches

    Science.gov (United States)

    Méjean, Ségolène; Faug, Thierry; Einav, Itai

    2017-04-01

    The current European guidelines for the design of snow avalanche protection dams highlighted the need of transforming a supercritical flow that impacts the dam into a subcritical flow which travels upstream. This transition involves the formation of a discontinuity in height and velocity, namely a jump. The jump height is crucial to predetermine the dam height needed to stop the avalanche against which one wants to be protected, and it dissipates a lot of energy if the dam is overtopped by an extreme avalanche of greater intensity than the former avalanche. For a sake of simplicity, the current European guidelines are based on the equations valid for hydraulic flows on a horizontal smooth bottom. However, the behavior of flowing snow is closer to the flow of dry granular materials. A recent experimental study has investigated in detail the geometry of standing granular jumps formed in shallow granular flows down a small-scale laboratory smooth-base chute. A number of discrepancies between the equations strictly valid for hydraulic flows on a horizontal smooth bottom were evidenced. The discrepancies are partly explained by the fact the traditional hydraulic equations do not take into account the forces acting over the jump volume, and consider an incompressible flow. As such, it is crucial to develop a new theoretical framework capable of overcoming the limits of the current hydraulic equations used in the European guidelines. The overarching aim of the present study is to develop this new theory for granular jumps with the help of both small-scale numerical simulations and laboratory tests. A new analytical solution based on depth-averaged mass and momentum equations is proposed but needs another length scale, that is the finite length of the jump, as well as a constitutive friction law, in order to be predictive. A number of numerical simulations based on the Discrete Element Method are conducted to access the micro-mechanical parameters in addition to the

  1. Wildlife Protection, Mitigation and Enhancement Planning for Grand Coulee Dam, Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Creveling, Jennifer

    1986-08-01

    The development and operation of Grand Coulee Dam inundated approximately 70,000 acres of wildlife habitat under the jurisdictions of the Colville Confederated Tribes, the Spokane Tribe, and the State of Washington. Under the provisions of the Pacific Northwest Electric Power Planning and Conservation Act of 1980, this study reviews losses to wildlife and habitat, and proposes mitigation for those losses. Wildlife loss estimates were developed from information available in the literature. Habitat losses and potential habitat gains through mitigation were estimated by a modified Habitat Evaluation Procedure. The mitigation plan proposes (1) acquisition of sufficient land or management rights to land to protect Habitat Units equivalent to those lost (approximately 73,000 acres of land would be required), (2) improvement and management of those lands to obtain and perpetuate target Habitat Units, and (3) protection and enhancement of suitable habitat for bald eagles. Mitigation is presented as four actions to be implemented over a 10-year period. A monitoring program is proposed to monitor mitigation success in terms of Habitat Units and wildlife population trends.

  2. The Limits of Social Protection: The Case of Hydropower Dams and Indigenous Peoples' Land

    OpenAIRE

    Cooke, Majid Fadzilah; Nordensvard, Johan; Saat, Bin Gusni; Urban, Frauke; Siciliano, Giuseppina

    2017-01-01

    Hydropower dams have been criticized for their social and environmental implications. There have been attempts to create international social standards for hydropower dam projects but these standards have had limited impact. This article uses an extended environmental justice framework to make sense of the resettlement and compensation schemes for Indigenous peoples who were resettled for the construction of the Bakun dam in Borneo, East Malaysia. The article therefore analyses the social pro...

  3. Evaluating the combined efficacy of polymers with fungicides for protection of museum textiles against fungal deterioration in Egypt.

    Science.gov (United States)

    Abdel-Kareem, Omar

    2010-01-01

    Fungal deterioration is one of the highest risk factors for damage of historical textile objects in Egypt. This paper represents both a study case about the fungal microflora deteriorating historical textiles in the Egyptian Museum and the Coptic museum in Cairo, and evaluation of the efficacy of several combinations of polymers with fungicides for the reinforcement of textiles and their prevention against fungal deterioration. Both cotton swab technique and biodeteriorated textile part technique were used for isolation of fungi from historical textile objects. The plate method with the manual key was used for identification of fungi. The results show that the most dominant fungi isolated from the tested textile samples belong to Alternaria, Aspergillus, Chaetomium, Penicillium and Trichoderma species. Microbiological testing was used for evaluating the usefulness of the suggested conservation materials (polymers combined with fungicides) in prevention of the fungal deterioration of ancient Egyptian textiles. Textile samples were treated with 4 selected polymers combined with two selected fungicides. Untreated and treated textile samples were deteriorated by 3 selected active fungal strains isolated from ancient Egyptian textiles. This study reports that most of the tested polymers combined with the tested fungicides prevented the fungal deterioration of textiles. Treatment of ancient textiles by suggested polymers combined with the suggested fungicides not only reinforces these textiles, but also prevents fungal deterioration and increases the durability of these textiles. The tested polymers without fungicides reduce the fungal deterioration of textiles but do not prevent it completely.

  4. Enhanced self-cleaning, antibacterial and UV protection properties of nano TiO2 treated textile through enzymatic pretreatment.

    Science.gov (United States)

    Montazer, Majid; Seifollahzadeh, Samira

    2011-01-01

    Textile materials can be treated with some enzymes to improve their functionality. The usual enzymatic treatment hydrolyzes the textile surfaces that leads to increase the functional groups. Here, the polyester/wool fabric as a blend of fibers fabric was selected and treated with the two different types of enzymes to increase the surface activity with a propose of higher nano-TiO(2) adsorption. The fabric was first treated with proteases and lipases to hydrolyze the wool and the polyester surfaces, respectively. It has been then dipped into an ultrasound bath containing nano TiO(2) and cross-linking agent followed by curing. The cross-linking agent, butane tetracarboxylic acid (BTCA), also assisted to enhance the nano-particles adsorption and stabilization on the fabric surface. The self-cleaning properties of the fabrics were examined through evaluating the color removal from the stained fabric with Acid Blue 113. The antibacterial properties were determined by reduction growth of a Gram-negative bacteria E. coli. and the UV protection was assessed by UV-reflectance spectrum. The SEM pictures and EDX spectrums of some samples were also reported. © 2011 The Authors. Photochemistry and Photobiology © 2011 The American Society of Photobiology.

  5. A virtual reality approach to public protection and emergency preparedness planning in dam safety analysis

    Energy Technology Data Exchange (ETDEWEB)

    Assaf, H.; Hartford, D.N.D. [BC Hydro, Burnaby, BC (Canada)

    2002-12-01

    BC Hydro has developed a new approach to analyze and assess the consequences of dam emergencies on human communities. The Life Safety Model (LSM) was designed to enable the electric utility to provide different response agencies with realistic dynamic models of a wide range of emergency scenarios that require a response in the event of a dam failure. LSM is pertinent to public safety because it enables response agencies to develop emergency plans and provides insight into the design of risk mitigation measures through its ability to simulate high risk locations. The model can create representations of downstream communities in potentially impacted areas and can geographically illustrate the potential dam breach events with reference to flood propagation and the movement of people on foot or in vehicles. A wide range of downstream dam operation conditions is presented. LSM merges state of the art technologies and recent scientific advances in environmental simulation and modelling, GIS, artificial intelligence, real time modelling of 2-dimensional dam breach flooding scenarios, structural reliability analysis, and human behaviour characterisation. This paper describes the modular architecture of the model and demonstrates how to generate the vital information needed to characterize a dam failure emergency. 2 refs., 1 tab., 7 figs.

  6. Smart textiles.

    Science.gov (United States)

    Van Langenhove, Lieva; Hertleer, Carla; Catrysse, Michael; Puers, Robert; Van Egmond, Harko; Matthijs, Dirk

    2004-01-01

    After technical textiles and functional textiles, also smart textiles came into force a few years ago. The term 'smart textiles' covers a broad range. The application possibilities are only limited by our imagination and creativity. In this presentation, it is further explored what smart textiles precisely mean. In a second part, an analysis is made of the possibilities, the state of affairs and the needs for further research.

  7. Next Generation of Electrospun Textiles for Chemical and Biological Protection and Air Filtration

    Science.gov (United States)

    2009-09-01

    electrospun fiber-based protective fabrics and filters for both chemical and biological protection. Reactive polyanion, polyhydroxamic acid, which can decompose...General description .................................... 27 1.2.5.2 Potential application in protection clothing and filters .......................... 30...Pro fabric system, consists of five alternating layers of fluoropolymers, nonwoven aramid fiber layers and a conductive layer. This multilayered system

  8. Textile dyes

    OpenAIRE

    Guaratini, Cláudia C. I. [UNESP; Zanoni, Maria Valnice Boldrin [UNESP

    2000-01-01

    A dye is a colored substance used to impart permanent color to other substances. Its most important use is in coloring textile fibers and fabrics. The removal of colour from dyehouse waste waters is currently a major problem in the textile sector. This paper provides an overview of the treatment technologies that can currently be used by the textile processor and the developments over the past decade with respect to the toxicological and ecotoxicological properties of synthetic organic dyes.

  9. Textile Architecture

    DEFF Research Database (Denmark)

    Heimdal, Elisabeth Jacobsen

    2010-01-01

    Textiles can be used as building skins, adding new aesthetic and functional qualities to architecture. Just like we as humans can put on a coat, buildings can also get dressed. Depending on our mood, or on the weather, we can change coat, and so can the building. But the idea of using textiles...

  10. Antibacterial textiles

    NARCIS (Netherlands)

    Amrit, Usha

    2015-01-01

    The aim of this thesis was the antibacterial functionalization of textiles and its application in professional laundries. The antibacterial functionalization was meant for the various textile packages lent out by the laundry companies to their customers from hotels, hospital or food industries. The

  11. Future Textiles

    DEFF Research Database (Denmark)

    Hansen, Anne-Louise Degn; Jensen, Hanne Troels Fusvad; Hansen, Martin

    2011-01-01

    Magasinet Future Textiles samler resultaterne fra projektet Future Textiles, der markedsfører området intelligente tekstiler. I magasinet kan man læse om trends, drivkræfter, udfordringer samt få ideer til nye produkter inden for intelligente tekstiler. Områder som bæredygtighed og kundetilpasning...

  12. Textile Tectonics

    DEFF Research Database (Denmark)

    Mossé, Aurélie

    2008-01-01

    The meeting of architecture and textiles is a continuous but too often forgotten story of intimate exchange. However, the 2nd Ventulett Symposium hosted by the College of Architecture, within Georgia Institute of Technology, Atlanta, GA, was one of these precious moments celebrating such a marriage....... Organized by Lars Spuybroeck, principal of Nox, Rotterdam, and current Thomas W. Ventulett III distinguished chair of Architectural Design, the event was embracing the textile tectonics as a core topic, praising textiles as the key component of architecture, relying on Gottfried Semper’s understanding...... of the discipline. Inspiring time gathering some of the most exciting architects of the moment, Lars Spuybroeck, Mark Burry, Evan Douglis, Michael Hensel and Cecil Balmond were invited to discuss their understanding of tectonics. Full text available at http://textilefutures.co.uk/exchange/bin/view/TextileFutures/TextileTectonics...

  13. Textile Supercapacitors

    Science.gov (United States)

    Jost, Kristy Alana

    Innovative and interdisciplinary solutions to wearable textile energy storage are explored as power sources for wearable electronics and smart textiles. Due to their long cycle life, non-toxic and inexpensive materials, supercapacitors were converted into textiles. Textile supercapacitors were developed using scalable fabrication methods including screen-printing, yarn making, and 3D computerized knitting. The electrode materials reported in this thesis undergo thorough electrochemical analysis, and are capable of storing up to 0.5 F/cm2 which is on par with conventionally solid supercapacitors (0.6 F/cm2). Capacitive yarns are capable of storing up to 37 mF/cm and are shown to be knittable on industrial knitting equipment. Both are some of the highest reported capacitance for all-carbon systems in the field. Yet both are the only systems composed of inexpensive and non-toxic activated carbon, the most commonly used electrode material used in supercapacitors, opposed to carbon nanotubes or graphene, which are typically more 10-100 times more expensive. However, all of the fabrication techniques reported here are also capable of incorporating a wide variety of materials, ultimately broadening the applications of textile energy storage as a whole. Fully machine knitted supercapacitors are also explored and electrochemically characterized in order to determine how the textile structure affects the capacitance. In conclusion, a wide variety of fabrication techniques for making textile supercapacitors were successfully explored.

  14. Unexpected long-term protection of adult offspring born to high-fat fed dams against obesity induced by a sucrose-rich diet.

    Directory of Open Access Journals (Sweden)

    Odile Couvreur

    Full Text Available BACKGROUND: Metabolic and endocrine environment during early life is crucial for metabolic imprinting. When dams were fed a high fat diet (HF diet, rat offspring developed hypothalamic leptin resistance with lean phenotype when weaned on a normal diet. Interestingly, when grown on the HF diet, they appeared to be protected against the effects of HF diet as compared to offspring of normally fed dams. The mechanisms involved in the protective effect of maternal HF diet are unclear. METHODOLOGY/PRINCIPAL FINDINGS: We thus investigated the impact of maternal high fat diet on offspring subjected to normal or high palatable diet (P diet on metabolic and endocrine parameters. We compared offspring born to dams fed P or HF diet. Offspring born to dams fed control or P diet, when fed P diet exhibited a higher body weight, altered hypothalamic leptin sensitivity and metabolic parameters suggesting that maternal P diet has no protective effect on offspring. Whereas, maternal HF diet reduces body weight gain and circulating triglycerides, and ameliorates corpulence index of offspring, even when subjected to P diet. Interestingly, this protective effect is differently expressed in male and female offspring. Male offspring exhibited higher energy expenditure as mirrored by increased hypothalamic UCP-2 and liver AdipoR1/R2 expression, and a profound change in the arcuate nucleus astrocytic organization. In female offspring, the most striking impact of maternal HF diet is the reduced hypothalamic expression of NPY and POMC. CONCLUSIONS/SIGNIFICANCE: HF diet given during gestation and lactation protects, at least partially, offspring from excessive weight gain through several mechanisms depending upon gender including changes in arcuate nucleus astrocytic organization and increased hypothalamic UCP-2 and liver AdipoR1/2 expression in males and reduced hypothalamic expression of NPY and POMC in females. Taken together our results reveal new mechanisms involved in

  15. Unexpected Long-Term Protection of Adult Offspring Born to High-Fat Fed Dams against Obesity Induced by a Sucrose-Rich Diet

    Science.gov (United States)

    Couvreur, Odile; Ferezou, Jacqueline; Gripois, Daniel; Serougne, Colette; Crépin, Delphine; Aubourg, Alain; Gertler, Arieh; Vacher, Claire-Marie; Taouis, Mohammed

    2011-01-01

    Background Metabolic and endocrine environment during early life is crucial for metabolic imprinting. When dams were fed a high fat diet (HF diet), rat offspring developed hypothalamic leptin resistance with lean phenotype when weaned on a normal diet. Interestingly, when grown on the HF diet, they appeared to be protected against the effects of HF diet as compared to offspring of normally fed dams. The mechanisms involved in the protective effect of maternal HF diet are unclear. Methodology/Principal Findings We thus investigated the impact of maternal high fat diet on offspring subjected to normal or high palatable diet (P diet) on metabolic and endocrine parameters. We compared offspring born to dams fed P or HF diet. Offspring born to dams fed control or P diet, when fed P diet exhibited a higher body weight, altered hypothalamic leptin sensitivity and metabolic parameters suggesting that maternal P diet has no protective effect on offspring. Whereas, maternal HF diet reduces body weight gain and circulating triglycerides, and ameliorates corpulence index of offspring, even when subjected to P diet. Interestingly, this protective effect is differently expressed in male and female offspring. Male offspring exhibited higher energy expenditure as mirrored by increased hypothalamic UCP-2 and liver AdipoR1/R2 expression, and a profound change in the arcuate nucleus astrocytic organization. In female offspring, the most striking impact of maternal HF diet is the reduced hypothalamic expression of NPY and POMC. Conclusions/Significance HF diet given during gestation and lactation protects, at least partially, offspring from excessive weight gain through several mechanisms depending upon gender including changes in arcuate nucleus astrocytic organization and increased hypothalamic UCP-2 and liver AdipoR1/2 expression in males and reduced hypothalamic expression of NPY and POMC in females. Taken together our results reveal new mechanisms involved in the protective

  16. Acoustic textiles

    CERN Document Server

    Nayak, Rajkishore

    2016-01-01

    This book highlights the manufacturing and applications of acoustic textiles in various industries. It also includes examples from different industries in which acoustic textiles can be used to absorb noise and help reduce the impact of noise at the workplace. Given the importance of noise reduction in the working environment in several industries, the book offers a valuable guide for companies, educators and researchers involved with acoustic materials.

  17. Textile terminologies

    OpenAIRE

    Michel, Cécile; Nosch, Marie Louise Bech

    2010-01-01

    International audience; Written sources from the ancient Near East and eastern Mediterranean, from the third to the first millennia BC, provide a wealth of terms for textiles. The twenty-two chapters in the present volume offer the first comprehensive survey of this important material, with special attention to evidence for significant interconnections in textile terminology among languages and cultures, across space and time. For example, the Greek word for a long shirt, khiton , ki-to in Li...

  18. Textile Architecture

    OpenAIRE

    Maurin, Bernard; Motro, René

    2013-01-01

    The basic idea for a textile architecture project originates during early meetings between the architect and the engineer. The morphologic richness of such projects is provided by the varying curvatures of shapes, in contradiction with a classical straight line and orthogonal architecture. However the rules of construction are quite different in terms of realisation and of mechanical behaviour: textile membranes are subjected to a pre-stress conferring them their rigidity, and a major objecti...

  19. Fragmentation by Dams Threatens Diadromous Fauna in Upstream Protected Areas - the Case of the La Amistad World Heritage Site (Costa Rica and Panama)

    Science.gov (United States)

    McLarney, W.; Mafla Herrera, M.; Arias Moreno, A. M.; Snyder, M. N.

    2016-12-01

    Biological consequences of fragmenting rivers with dams are especially acute for migratory species, and even moreso for diadromes (animals obliged to travel between marine and fresh water environments in order to complete their life cycles). Diadromy is a worldwide phenomenon, occurring wherever fresh water rivers run to the sea. Worldwide, diadromous behavior has been described for > 300 species of fish in 37 families, as well as for all of the > 800 species of so-called "freshwater" shrimp in 4 families, plus a few crabs and snails. Diadromy is especially prevalent on islands and isthmuses, where rivers are necessarily short and development of primary freshwater fauna limited. One example is the Mesoamerican isthmus, extending from southern Mexico to the Panama/Colombia border. A 2006 study showed more than 300 high (> 15 m.) dams planned for this 8 country region. One example of the consequences emerges from Asociacion ANAI's biomonitoring work over 17 years in one part of Mesoamerica - the watersheds draining the Caribbean slope of the La Amistad World Heritage Site in Costa Rica and Panama. Our work has shown that over 80 % of fish and all of the shrimp in rivers above 100 m. altitude are diadromes. If all currently planned dams are built, we predict that 11 species of fish and shrimp will be extirpated from >90% of the World Heritage Site. Precedent exists in Puerto Rico, where damming has eliminated diadromous fish and all but a remnant of the shrimp from 25% of the island's watersheds. In La Amistad, the consequences, for biodiversity and fishery resources relied upon by neighboring indigenous ethnias are obvious. In Panama, protected area boundaries were drawn to avoid the issue of dams and reservoirs in national parks; our research shows the need for more comprehensive design criteria to prevent extirpations in protected areas.

  20. Textile Dampfbremse

    OpenAIRE

    Saur, A.; Holm, A.

    2006-01-01

    DE 102005020295 A1 UPAB: 20061218 NOVELTY - Manufactured from a textile membrane and made airtight and wind-proof, a vapor barrier seal is attached as an outermost layer on a room side and/or external side of walls, ceilings or floors. It is designed as a carpet or is integrated in a carpet. DETAILED DESCRIPTION - An INDEPENDENT CLAIM is also included for a means of transport with a vapor barrier seal. USE - As a vapor barrier seal manufactured from textile for an interior space/indoors to be...

  1. Treatment of textile wastes

    OpenAIRE

    Srebrenkoska, Vineta; Krsteva, Silvana; Golomeova, Saska

    2013-01-01

    The production of a textile requires several stages of mechanical processing such as spinning, weaving, knitting, and garment production, which seem to be insulated from the wet treatment processes like pretreatment, dyeing, printing, and finishing operations. Тhere is a strong interrelation between treatment processes in the dry state and consecutive wet treatments. Most of the processes and products have a negative impact on the environment. Laws and standards for environmental protection a...

  2. Failure modes of conducting yarns in electronic-textile applications

    NARCIS (Netherlands)

    Kok, M. de; Vries, H. de; Pacheco, K.; Heck, G. van

    2015-01-01

    Integration of electronic functionalities into textiles adds to the value of textiles. It allows measuring, detecting, actuating and treating or communicating with a body or object. These added values can render the smart textiles very useful, fun, supporting, protecting or even lifesaving. It is,

  3. Methods for waste waters treatment in textile industry

    OpenAIRE

    Srebrenkoska, Vineta; Zezova, Silvana; Spasova, Sanja; Golomeova, Saska

    2014-01-01

    The processes of production of textiles or wet treatments and finishing processes of textile materials are huge consumers of water with high quality. As a result of these various processes, considerable amounts of polluted water are released. This paper puts emphasis on the problem of environmental protection against waste waters generated by textile industry. The methods of pretreatment or purification of waste waters in the textile industry can be: Primary (screening, sedimentation, homo...

  4. Spatiotemporal Distribution and Assemblages of Fishes below the Lowermost Dam in Protected Reach in the Yangtze River Main Stream: Implications for River Management

    Directory of Open Access Journals (Sweden)

    Junyi Li

    2016-01-01

    Full Text Available Now more and more ecologists concern about the impacts of dam construction on fish. However, studies of fishes downstream Gezhouba Dam were rarely reported except Chinese sturgeon (Acipenser sinensis Gray. In this study, catch investigations and five hydroacoustic detections were completed from 2015 to 2016 to understand the distribution, size, and categories of fishes and their relationship with the environmental factors below Gezhouba Dam in protected reach in the Yangtze River main stream. Results showed significant differences in fish distribution and TS (target strength between wet and flood seasons. Mean TS in five hydroacoustic detections were −59.98 dB, −54.70 dB, −56.16 dB, −57.90 dB, and −59.17 dB, respectively, and dominant fish species are Coreius guichenoti (Bleeker, Siniperca chuatsi (Basilewsky, and Pelteobagrus vachelli (Richardson. In the longitudinal direction, fish preferred to stay in some specific sections like reaches 2, 4, 7, 8, 11, and 16. Since hydrology factors change greatly in different seasons, environmental characteristics vary along the reaches, and human activities play an important role in the fish behavior, it is concluded that great cross-season changes in hydrology lead to the differences in TS and fish assemblages and that geography characteristics, especially channel geography, together with human activities influence fish longitudinal distribution. This finding provides basic knowledge of spatiotemporal distribution and assemblages of fishes in the extended reaches downstream Gezhouba Dam. In addition, it offers implications for river management. It could also serve as reference of future research on fish habitat.

  5. TEXTILE SALVAGE

    CERN Multimedia

    Relations with the Host States Service

    2002-01-01

    Readers are reminded that Geneva's agency for salvaging used clothing, other textiles and old shoes (Coordination d'oeuvres d'entraide pour la récupération de vêtements, textiles et chaussures usagés dans le canton de Genève) has a container in the car park outside CERN's Meyrin site. In 2001, 1000 tonnes of such items were collected in the Canton of Geneva (as compared with 840 tonnes in 2000), of which 4460 kg came from the container outside the Meyrin site. The operation's organisers (Caritas, Centre Social Protestant, the Geneva Section of the Swiss Red Cross, Terre des Hommes, the Geneva branch of Terre des Hommes Suisse and Emmaüs, Geneva) would like to thank all those who have donated clothing or otherwise supported their campaign. Relations with the Host States Service Tel. 72848 http://www.cern.ch/relations/

  6. Textile Technology Analysis Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The Textile Analysis Labis built for evaluating and characterizing the physical properties of an array of textile materials, but specifically those used in aircrew...

  7. Characterization of Textiles Used in Chefs' Uniforms for Protection Against Thermal Hazards Encountered in the Kitchen Environment.

    Science.gov (United States)

    Zhang, Han; McQueen, Rachel H; Batcheller, Jane C; Ehnes, Briana L; Paskaluk, Stephen A

    2015-10-01

    Within the kitchen the potential for burn injuries arising from contact with hot surfaces, flames, hot liquid, and steam hazards is high. The chef's uniform can potentially offer some protection against such burns by providing a protective barrier between the skin and the thermal hazard, although the extent to which can provide some protection is unknown. The purpose of this study was to examine whether fabrics used in chefs' uniforms were able to provide some protection against thermal hazards encountered in the kitchen. Fabrics from chefs' jackets and aprons were selected. Flammability of single- and multiple-layered fabrics was measured. Effect of jacket type, apron and number of layers on hot surface, hot water, and steam exposure was also measured. Findings showed that all of the jacket and apron fabrics rapidly ignited when exposed to a flame. Thermal protection against hot surfaces increased as layers increased due to more insulation. Protection against steam and hot water improved with an impermeable apron in the system. For wet thermal hazards increasing the number of permeable layers can decrease the level of protection due to stored thermal energy. As the hands and arms are most at risk of burn injury increased insulation and water-impermeable barrier in the sleeves would improve thermal protection with minimal compromise to overall thermal comfort. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

  8. Evaluation of techniques used to protect tailrace fishes during turbine maneuvers at Três Marias Dam, Brazil

    Directory of Open Access Journals (Sweden)

    Francisco de Andrade

    Full Text Available Turbine dewatering and stop/startup may lead to the death of tons of fish at Brazilian power dams. The Três Marias Dam (TMD on the São Francisco River has adopted two techniques to reduce the quantity of fish, mostly mandi (Pimelodus maculatus, Pimelodidae, affected by these maneuvers. They are: (i spill before turbine dewatering to attract fish out of the tailrace, and (ii fish screens in the stop log slots during turbine stop/startup to prevent fish from entering the draft tube. Here, we investigated whether spill and fish screens reduced the quantity of fish affected by turbine dewatering and stop/startup at TMD. We also determined whether the biomass of mandi trapped during turbine dewatering may be predicted by turbine discharge (Q and/or catch per unit effort (CPUE of mandis in the tailrace. Due to insufficient statistical power, our data were inconclusive as to whether spill attracted mandi out of the tailrace. We verified that the presence of fish screens significantly reduced the biomass of dead/moribund fish during turbine stop/startup. The biomass of mandis trapped in the draft tube during turbine dewatering was mainly influenced by Q (r² = 0.67, followed by CPUE (r² = 0.49. Since the trapped fish biomass correlated negatively with Q, we recommend that Q be maximized before turbine dewatering to reduce quantity of mandi trapped in the draft tube. The information presented here may be useful for reducing the quantity of fish affected by turbine maneuvers at TMD, as well as other dams.

  9. NATO Advanced Study Institute on Defence-related Intelligent Textiles and Clothing for Ballistic and NBC Protection

    CERN Document Server

    Jayaraman, Sundaresan; Intelligent textiles and clothing for ballistic and NBC protection

    2012-01-01

    This volume describes the latest developments in protective clothing against nearly any kind of threat for both military and civilians. It deals with protection through the use of nanotechnology, interactive clothing and biotechnological processes. Factors such as comfort and ballistics are also considered in the book, and several practical examples are discussed. All papers are written by leading experts in their respective fields. Professionals and students alike will benefit from the knowledge and expertise imparted in these outstanding contributions.

  10. TEXTILE SURFACE MODIFICATION BY PYHSICAL VAPOR DEPOSITION – (REVIEW

    Directory of Open Access Journals (Sweden)

    YUCE Ismail

    2017-05-01

    Full Text Available Textile products are used in various branches of the industry from automotive to space products. Textiles produced for industrial use are generally referred to as technical textiles. Technical textiles are nowadays applied to several areas including transportation, medicine, agriculture, protection, sports, packaging, civil engineering and industry. There are rapid developments in the types of materials used in technical textiles. Therefore, modification and functionalization of textile surfaces is becoming more crucial. The improvements of the properties such as anti-bacterial properties, fire resistivity, UV radiation resistance, electrical conductivity, self cleaning, and super hydrophobic, is getting more concern with respect to developments in textile engineering. The properties of textile surfaces are closely related to the fiber structure, the differences in the polymer composition, the fiber mixture ratio, and the physical and chemical processes applied. Textile surface modifications can be examined in four groups under the name mechanical, chemical, burning and plasma. Surface modifications are made to improve the functionality of textile products. Textile surface modifications affect the properties of the products such as softness, adhesion and wettability. The purpose of this work is to reveal varieties of vapor deposition modifications to improve functionality. For this purpose, the pyhsical vapor deposition methods, their affects on textile products and their end-uses will be reviewed.

  11. Functional textiles driven by transforming NiTi wires

    Directory of Open Access Journals (Sweden)

    Heller Luděk

    2015-01-01

    Full Text Available Over last ten years, we have carried out extensive research on the use of thin NiTi wires for advanced functional textiles. In this work we discuss general challenges and opportunities in the design, production and processing of NiTi textiles stemming from the fact that NiTi is martensitically transforming metal. As a case example, application of weft knitting technology to NiTi wires is discussed in detail covering technological aspects related to textile processing, shape setting as well as multiaxial thermomechanical properties of final products. Finally, two weft knitted NiTi textile proof-of-concepts with a promising application potential are presented. First, a textile based actuator with large strokes and low forces characteristics is introduced. Second, 3D textiles with temperature-adaptive cross-section height for applications in technical or protective textiles are described.

  12. Possibilities and applications of smart textiles

    Directory of Open Access Journals (Sweden)

    Rotari Elena

    2017-01-01

    Full Text Available In the process of creating of new clothing products, the designers choose textiles which have: appearance, comfort, durability, shape retention, protection from bad weather, etc. These aspects not fully satisfy the new factors, such automatic regulation of body temperature; signs of heart attack; fever and others. Smart textiles possess such advanced properties. The functionality of smart textiles consists in informing, protecting and relaxing the wearer. In this research, we approached and revealed the application of e-textile materials and their importance in clothing. The research methodology consists in the efficacy of applying Cu wires to the fabric and the result obtained. The results obtained are positive and they are revealed in the research.

  13. Dam Safety Concepts

    NARCIS (Netherlands)

    Duricic, J.

    2014-01-01

    The majority of dams constructed in the world are dams that can be categorized as embankment dams. Throughout history we can point to many failures of dams, and embankment dams in particular. Nowadays it is clear that the goal to construct stable dams has not been achieved, even with advanced

  14. 40 CFR 427.80 - Applicability; description of the coating or finishing of asbestos textiles subcategory.

    Science.gov (United States)

    2010-07-01

    ... coating or finishing of asbestos textiles subcategory. 427.80 Section 427.80 Protection of Environment... SOURCE CATEGORY Coating or Finishing of Asbestos Textiles Subcategory § 427.80 Applicability; description of the coating or finishing of asbestos textiles subcategory. The provisions of this subpart are...

  15. Textiles and clothing sustainability sustainable textile chemical processes

    CERN Document Server

    2017-01-01

    This book highlights the challenges in sustainable wet processing of textiles, natural dyes, enzymatic textiles and sustainable textile finishes. Textile industry is known for its chemical processing issues and many NGO’s are behind the textile sector to streamline its chemical processing, which is the black face of clothing and fashion sector. Sustainable textile chemical processes are crucial for attaining sustainability in the clothing sector. Seven comprehensive chapters are aimed to highlight these issues in the book.

  16. Textiles Performance Testing Facilities

    Data.gov (United States)

    Federal Laboratory Consortium — The Textiles Performance Testing Facilities has the capabilities to perform all physical wet and dry performance testing, and visual and instrumental color analysis...

  17. Smart Electronic Textiles.

    Science.gov (United States)

    Weng, Wei; Chen, Peining; He, Sisi; Sun, Xuemei; Peng, Huisheng

    2016-05-17

    This Review describes the state-of-the-art of wearable electronics (smart textiles). The unique and promising advantages of smart electronic textiles are highlighted by comparing them with the conventional planar counterparts. The main kinds of smart electronic textiles based on different functionalities, namely the generation, storage, and utilization of electricity, are then discussed with an emphasis on the use of functional materials. The remaining challenges are summarized together with important new directions to provide some useful clues for the future development of smart electronic textiles. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. CONTAINER FOR USED TEXTILES

    CERN Document Server

    Relation with the Host States

    2001-01-01

    We should like to remind you that a special container for textiles for the Association 'Réalise/Rapid Service' of Geneva is located in the car park outside the Meyrin site. The Association has informed us that 3 306 kg of textiles were deposited in the container in 2000 and wishes to convey its warm gratitude to all donors.

  19. NIR Analysis for Textiles

    Science.gov (United States)

    Near Infrared (NIR) spectroscopy has been found to be a useful technique to characterize raw materials and finished textile products, and NIR methods and techniques continue to find increasingly diverse and wide-ranging quantitative and qualitative applications in the textile industry. NIR methods ...

  20. The Textile Space

    DEFF Research Database (Denmark)

    Bendixen, Cecilie

    2010-01-01

    Textile has within the last decade increasingly been regarded as an architectural material. Many new textiles have been developed and this has increased its applications in architecture. But how do textile and space meet and which spatial qualities can arise in this meeting? The paper describes...... a series of practical studies of the spatial qualities that can be established through the design of three very different fabrics. The topic is part of an ongoing Ph.D. project at The Danish Design School in Copenhagen. The main theme of the Ph.D. is the inter-play between textile, space and sound. Space...... and it has a special poetry which is not to be found in any other material. Which spatial qualities can be obtained with these textile properties? Contemporary conception of space in architecture can be said still to rely on the modernist conception. In practical experiments it is investigated how...

  1. DAM Safety and Deformation Monitoring in Dams

    Science.gov (United States)

    Kalkan, Y.; Bilgi, S.; Potts, L.; Miiama, J.; Mahgoub, M.; Rahman, S.

    2013-12-01

    Water is the life and necessity to water is increasing day by day with respect to the World population, rising of living standards and destruction of nature. Thus, the importance of water and water structures have been increasing gradually. Dams are among the most important engineering structures used for water supplies, flood controls, agricultural purposes as well as drinking and hydroelectric power. There are about 150.000 large size dams in the World. Especially after the Second World War, higher and larger capacity dams have been constructed. Dams create certain risks like the other manmade structures. No one knows precisely how many dam failures have occurred in the World, whereas hundreds of dam failures have occurred throughout the U.S. history. Some basic physical data are very important for assessing the safety and performance of dams. These are movement, water pressure, seepage, reservoir and tail-water elevations, local seismic activities, total pressure, stress and strain, internal concrete temperature, ambient temperature and precipitation. These physical data are measured and monitored by the instruments and equipment. Dams and their surroundings have to be monitored by using essential methods at periodic time intervals in order to determine the possible changes that may occur over the time. Monitoring programs typically consist of; surveillance or visual observation. These programs on dams provide information for evaluating the dam's performance related to the design intent and expected changes that could affect the safety performance of the dam. Additionally, these programs are used for investigating and evaluating the abnormal or degrading performance where any remedial action is necessary. Geodetic and non-geodetic methods are used for monitoring. Monitoring the performance of the dams is critical for producing and maintaining the safe dams. This study provides some information, safety and the techniques about the deformation monitoring of the

  2. The Textile Form of Sound

    DEFF Research Database (Denmark)

    Bendixen, Cecilie

    2010-01-01

    The aim of this article is to shed light on a small part of the research taking place in the textile field. The article describes an ongoing PhD research project on textiles and sound and outlines the project's two main questions: how sound can be shaped by textiles and conversely how textiles can...

  3. Health Risk Assessment for Organotins in Textiles

    NARCIS (Netherlands)

    Janssen PJCM; Veen MP van; Speijers GJA; CSR; LBM

    2000-01-01

    In January 1998 RIVM was asked to carry out a preliminary risk assessment on organic tin compounds (organotins) in textiles. Measurements carried out by the Dutch Health Protection Inspectorate had shown these potentially toxic compounds to be present in several consumer products, including items of

  4. Smart textiles: Challenges and opportunities

    Science.gov (United States)

    Cherenack, Kunigunde; van Pieterson, Liesbeth

    2012-11-01

    Smart textiles research represents a new model for generating creative and novel solutions for integrating electronics into unusual environments and will result in new discoveries that push the boundaries of science forward. A key driver for smart textiles research is the fact that both textile and electronics fabrication processes are capable of functionalizing large-area surfaces at very high speeds. In this article we review the history of smart textiles development, introducing the main trends and technological challenges faced in this field. Then, we identify key challenges that are the focus of ongoing research. We then proceed to discuss fundamentals of smart textiles: textile fabrication methods and textile interconnect lines, textile sensor, and output device components and integration of commercial components into textile architectures. Next we discuss representative smart textile systems and finally provide our outlook over the field and a prediction for the future.

  5. 78 FR 53494 - Dam Safety Modifications at Cherokee, Fort Loudoun, Tellico, and Watts Bar Dams

    Science.gov (United States)

    2013-08-29

    ... Cherokee, TVA would also install about 40 post-tensioned anchors into the concrete portion of the dam... of Dam Structures: Combination of Concrete Floodwalls and Earthen Embankments, will protect the four... Watts Bar). TVA also installed a permanent concrete apron on approximately 2 acres of the downstream...

  6. Biotreatment of effluent from 'Adire' textile factories in Ibadan, Nigeria.

    Science.gov (United States)

    Okareh, Oladapo T; Ademodi, Tuntunlade F; Igbinosa, Etinosa O

    2017-11-10

    In this present study, bacteria were isolated from wastewater and polluted soil collected from two cottage textile factories in Ibadan. These bacteria isolates were used for the biotreatment of textile mill effluent. The physicochemical parameters of the textile mill effluent before treatment were carried out and percentage decolourisation of the effluent was analysed using ultraviolet-visible spectroscopy (UV-vis technique). The degradation products of the textile mill effluent characterised by Fourier transform infrared spectroscopy (FTIR). The pH values of the effluent were within the permissible limit of Federal Environmental Protection Agency (FEPA) and National Environmental Standards and Regulations Enforcement Agency (NESREA), while temperature and electric conductivity of the effluents were below the permissible limit of FEPA and NESREA. The BOD, COD, TSS, TDS and chloride of the textile mill effluent from the two cottage textile factories were above the permissible limits of FEPA and NESREA. Twelve bacteria isolates were screened, effective in decolourising commercial dyes and used to decolourise the textile mill effluent. The bacteria isolates were characterised and identified as Bacillus sp., Micrococcus sp., Erwinia sp., Acinetobacter sp. and Nocardia sp. The decolourisation of textile effluent was observed through the changes of spectra of UV-visible spectrophotometer. The following bacteria revealed different percentage proportion of decolouration profile:- Bacillus sp., had the highest percentage decolourisation of 57.7%, whereas Micrococcus sp. and Acinetobacter sp. had percentage decolourisation of 32.8 and 26.3%, respectively. The degradation profile of textile effluent was revealed through FTIR spectral analysis. The changes in the position of major peaks revealed from the textile effluent through FTIR spectral analysis, appearances of new peaks and the disappearances of existing peaks signify the degradation of the wastewater. Thus, some native

  7. Deformation Monitoring and Bathymetry Analyses in Rock-Fill Dams, a Case Study at Ataturk Dam

    Science.gov (United States)

    Kalkan, Y.; Bilgi, S.

    2014-12-01

    Turkey has 595 dams constructed between 1936 and 2013 for the purposes of irrigation, flood control, hydroelectric energy and drinking water. A major portion of the dam basins in Turkey are deprived of vegetation and have slope topography on near surrounding area. However, landscaping covered with forest around the dam basin is desirable for erosion control. In fact; the dams, have basins deprived of vegetation, fill up quickly due to sediment transport. Erosion control and forestation are important factors, reducing the sediment, to protect the water basins of the dams and increase the functioning life of the dams. The functioning life of dams is as important as the investment and construction. Nevertheless, in order to provide safety of human life living around, well planned monitoring is essential for dams. Dams are very large and critical structures and they demand the use or application of precise measuring systems. Some basic physical data are very important for assessing the safety and performance of dams. These are movement, water pressure, seepage, reservoir and tail-water elevations, local seismic activities, total pressure, stress and strain, internal concrete temperature, ambient temperature and precipitation. Monitoring is an essential component of the dam after construction and during operation and must en­able the timely detection of any behavior that could deteriorate the dam, potentially result in its shutdown or failure. Considering the time and labor consumed by long-term measurements, processing and analysis of measured data, importance of the small structural motions at regular intervals could be comprehended. This study provides some information, safety and the techniques about the deformation monitoring of the dams, dam safety and related analysis. The case study is the deformation measurements of Atatürk Dam in Turkey which is the 6th largest dam of world considering the filling volume of embankment. Brief information is given about the

  8. CONTAINER FOR USED TEXTILES

    CERN Multimedia

    Relations avec les Pays hôtes

    2000-01-01

    We should like to remind you that a special container for textiles for the Association 'Réalise/Rapid Service' of Geneva is located in the car park outside the Meyrin site.The Association has informed us that 2 530 kg of textiles were deposited in the container in 1998 and wishes to convey its warm gratitude to all donors.Relations with the Host StatesTel. 75152

  9. NASA CPAS Drogue Textile Riser Feasibility Study

    Science.gov (United States)

    Hennings, Elsa J.; Petersen, Michael L.; Anderson, Brian; Johnson, Brian

    2015-01-01

    Steel cable was chosen for the lower end of the drogue and main parachute risers on NASA's Orion Multi Purpose Crew Vehicle Parachute Assembly System (CPAS) to protect the risers from extreme temperatures and abrasion should they contact the crew module during deployment, as was done for Apollo. Due to the weight and deployment complexity inherent in steel, there was significant interest in the possibility of substituting textile for steel for the drogue and main parachute risers. However, textile risers could be damaged when subjected to high temperature and abrasion. Investigations were consequently performed by a subset of the authors to determine whether sacrificial, non-load-bearing textile riser covers could be developed to mitigate the thermal and abrasion concerns. Multiple material combinations were tested, resulting in a cover design capable of protecting the riser against severe riser/crew module contact interactions. A feasibility study was then conducted to evaluate the performance of the textile drogue riser cover in relevant abrasive environments. This paper describes the testing performed and documents the results of this feasibility study.

  10. Dam removal: Listening in

    Science.gov (United States)

    Foley, Melissa M.; Bellmore, James; O'Connor, James E.; Duda, Jeff; East, Amy E.; Grant, Gordon G.; Anderson, Chauncey; Bountry, Jennifer A.; Collins, Mathias J.; Connolly, Patrick J.; Craig, Laura S.; Evans, James E.; Greene, Samantha; Magilligan, Francis J.; Magirl, Christopher S.; Major, Jon J.; Pess, George R.; Randle, Timothy J.; Shafroth, Patrick B.; Torgersen, Christian; Tullos, Desiree D.; Wilcox, Andrew C.

    2017-01-01

    Dam removal is widely used as an approach for river restoration in the United States. The increase in dam removals—particularly large dams—and associated dam-removal studies over the last few decades motivated a working group at the USGS John Wesley Powell Center for Analysis and Synthesis to review and synthesize available studies of dam removals and their findings. Based on dam removals thus far, some general conclusions have emerged: (1) physical responses are typically fast, with the rate of sediment erosion largely dependent on sediment characteristics and dam-removal strategy; (2) ecological responses to dam removal differ among the affected upstream, downstream, and reservoir reaches; (3) dam removal tends to quickly reestablish connectivity, restoring the movement of material and organisms between upstream and downstream river reaches; (4) geographic context, river history, and land use significantly influence river restoration trajectories and recovery potential because they control broader physical and ecological processes and conditions; and (5) quantitative modeling capability is improving, particularly for physical and broad-scale ecological effects, and gives managers information needed to understand and predict long-term effects of dam removal on riverine ecosystems. Although these studies collectively enhance our understanding of how riverine ecosystems respond to dam removal, knowledge gaps remain because most studies have been short (< 5 years) and do not adequately represent the diversity of dam types, watershed conditions, and dam-removal methods in the U.S.

  11. Hoover Dam Learning Packet.

    Science.gov (United States)

    Bureau of Reclamation (Dept. of Interior), Washington, DC.

    This learning packet provides background information about Hoover Dam (Nevada) and the surrounding area. Since the dam was built at the height of the Depression in 1931, people came from all over the country to work on it. Because of Hoover Dam, the Colorado River was controlled for the first time in history and farmers in Nevada, California, and…

  12. Dams designed to fail

    Energy Technology Data Exchange (ETDEWEB)

    Penman, A. [Geotechnical Engineering Consultants, Harpenden (United Kingdom)

    2004-09-01

    New developments in geotechnical engineering have led to methods for designing and constructing safe embankment dams. Failed dams can be categorized as those designed to fail, and those that have failed unexpectedly. This presentation outlined 3 dam failures: the 61 m high Malpasset Dam in France in 1959 which killed 421; the 71 m high Baldwin Hills Dam in the United States in 1963 which killed 5; and, the Vajont Dam in Italy in 1963 which killed 2,600 people. Following these incidents, the International Commission for Large Dams (ICOLD) reviewed regulations on reservoir safety. The 3 dams were found to have inadequate spillways and their failures were due to faults in their design. Fuse plug spillways, which address this problem, are designed to fail if an existing spillway proves inadequate. They allow additional discharge to prevent overtopping of the embankment dam. This solution can only be used if there is an adjacent valley to take the additional discharge. Examples of fuse gates were presented along with their effect on dam safety. A research program is currently underway in Norway in which high embankment dams are being studied for overtopping failure and failure due to internal erosion. Internal erosion has been the main reason why dams have failed unexpectedly. To prevent failures, designers suggested the use of a clay blanket placed under the upstream shoulder. However, for dams with soft clay cores, these underblankets could provide a route for a slip surface and that could lead to failure of the upstream shoulder. It was concluded that a safe arrangement for embankment dams includes the use of tipping gates or overturning gates which always fail at a required flood water level. Many have been installed in old and new dams around the world. 14 refs., 19 figs.

  13. Synergy of Uli Symbols and Textiles: An Exploration in Textile ...

    African Journals Online (AJOL)

    In this study explorative experiments were carried out in sculptural form using textile and textile related materials (Textile Sculpture) in order to invigorate these symbols adopting their meanings but giving them different place through innovative and creative process. Uli, a symbolic painting of female body provides unique ...

  14. Sustainability in the textile industry

    CERN Document Server

    2017-01-01

    This book examines in detail key aspects of sustainability in the textile industry, especially environmental, social and economic sustainability in the textiles and clothing sector. It highlights the various faces and facets of sustainability and their implications for textiles and the clothing sector.

  15. Antioxidant cosmeto-textiles: skin assessment.

    Science.gov (United States)

    Alonso, Cristina; Martí, Meritxell; Martínez, Vanessa; Rubio, Laia; Parra, José L; Coderch, Luisa

    2013-05-01

    Resveratrol, a natural product, has been reported to have antioxidant activities such as the scavenging of free radicals. This compound could be used in the dermocosmetic field to protect the skin from oxidative stress. In this work, the percutaneous profile of resveratrol in ethanol solutions through pig skin was determinated by an in vitro methodology. The percutaneous absorption of resveratrol was measured and compared with trolox, an analogous of Vitamin E. Both antioxidants were found in all skin sections (stratum corneum, epidermis, and dermis). Besides, the free radical scavenging activity of resveratrol and trolox has been evaluated using DPPH method. The effective dose (ED₅₀) of compounds and DPPH radical inhibition in each skin layer were evaluated. Under the conditions used for these experiments, it can be deduced that resveratrol is more efficient than trolox as an antioxidant, also in the inner skin layers. The cosmeto-textiles with an active substance incorporated into their structure are increasingly used in the cosmetics and pharmaceutical industries. The action of several cosmeto-textiles on the skin was assessed by in vitro and in vivo methodologies. Samples of these cosmeto-textiles were prepared with resveratrol incorporated into cotton and polyamide fabrics. An in vitro percutaneous absorption was used to demonstrate the delivery of the resveratrol from the textile to the different skin layers (stratum corneum, epidermis, and dermis). Additionally, these cosmeto-textiles containing the antioxidant were applied onto the forearms of volunteers to evaluate the textiles' efficacy in skin penetration. The antioxidant's antiradical capacity was evaluated using the DPPH method. Results showed that resveratrol could be detected in the dermis, epidermis, and stratum corneum (SC) by an in vitro percutaneous absorption method and was also detected in the outermost layers of the SC by an in vivo method (stripping). A smaller amount of resveratrol was

  16. EnviroAtlas - National Inventory of Dams for the Conterminous United States

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset is a summary of the National Dams Inventory data from 2009 survey. The file contains counts of inventoried dams by 12-digit hydrologic units...

  17. Chemical, mechanical and antibacterial properties of silver nanocluster/silica composite coated textiles for safety systems and aerospace applications

    Energy Technology Data Exchange (ETDEWEB)

    Ferraris, S., E-mail: sara.ferraris@polito.it [Politecnico di Torino, Torino, C.so Duca degli Abruzzi 24, 10129 (Italy); Perero, S.; Miola, M.; Vernè, E. [Politecnico di Torino, Torino, C.so Duca degli Abruzzi 24, 10129 (Italy); Rosiello, A.; Ferrazzo, V.; Valletta, G. [Aero Sekur S.p.A., Aprilia, via delle Valli 46, 04011 (Italy); Sanchez, J.; Ohrlander, M. [Bactiguard AB, Biblioteksgatan 25, Box 5070, SE-10242, Stockholm (Sweden); Tjörnhammar, S.; Fokine, M.; Laurell, F. [KTH Royal Institute of Technology, Department of Applied Physics, Roslagstullsbacken 21, SE-106 91 Laserphysics, Stockholm (Sweden); Blomberg, E. [KTH Royal Institute of Technology, Div. Surface and Corrosion Science, Drottning Kristinas väg 51, SE-100 44, Stockholm (Sweden); SP Technical Research Institute of Sweden, Chemistry, Materials and Surfaces, Box 5607, SE-114 86, Stockholm (Sweden); Skoglund, S.; Odnevall Wallinder, I. [KTH Royal Institute of Technology, Div. Surface and Corrosion Science, Drottning Kristinas väg 51, SE-100 44, Stockholm (Sweden); Ferraris, M. [Politecnico di Torino, Torino, C.so Duca degli Abruzzi 24, 10129 (Italy)

    2014-10-30

    Highlights: • Silver nanoclusters-silica composite coatings were deposited on textiles. • Textiles for NBC protection suites and for aerospace applications were considered. • The coating process conferred all textiles a good antibacterial activity. • The coating does not alter the properties of bare textiles. - Abstract: This work describes the chemical, mechanical and antibacterial properties of a novel silver nanocluster/silica composite coating, obtained by sputtering, on textiles for use in nuclear bacteriological and chemical (NBC) protection suites and for aerospace applications. The properties of the coated textiles were analyzed in terms of surface morphology, silver concentration and silver release in artificial sweat and synthetic tap water, respectively. No release of silver nanoparticles was observed at given conditions. The water repellency, permeability, flammability and mechanical resistance of the textiles before and after sputtering demonstrated that the textile properties were not negatively affected by the coating. The antibacterial effect was evaluated at different experimental conditions using a standard bacterial strain of Staphylococcus aureus and compared with the behavior of uncoated textiles. The coating process conferred all textiles a good antibacterial activity. Optimal deposition conditions were elaborated to obtain sufficient antibacterial action without altering the aesthetical appearance of the textiles. The antibacterial coating retained its antibacterial activity after one cycle in a washing machine only for the Nylon based textile.

  18. Health and safety concerns of textiles with nanomaterials

    Science.gov (United States)

    Almeida, L.; Ramos, D.

    2017-10-01

    There is a growing concern related to the effects of nanomaterials in health and safety.Nanotechnologies are already present in many consumer products, including textiles. “Nanotextiles” can be considered as traditional textiles with the incorporation of nanoparticles. They present often functionalities such as antibacterial, ultraviolet radiation protection, water and dirt repellency, self-cleaning or flame retardancy. Nanoparticles can be released from the textile materials due to different effects (abrasion and other mechanical stresses, sweat, irradiation, washing, temperature changes, etc.). It is then expectable that “nanotextiles” may release individual nanoparticles, agglomerates of nanoparticles or small particles of textile with or without nanoparticles, depending on the type of integration of the nanoparticles in textiles. The most important exposure route of the human body to nanoparticles in case of textiles is skin contact. Several standards are being developed under the auspices of the European Committee for Standardization. In this paper, it is presented the development and application of a test method to evaluate the skin exposure to nanoparticles, to evaluate the transfer of the nanoparticles from the textile to the skin by the effect of abrasion and sweat.

  19. THE DYNAMICS OF THE TEXTILE MARKET. ANALYTICAL REFERENCES

    Directory of Open Access Journals (Sweden)

    Aliona CERNOVA

    2013-12-01

    Full Text Available During the transition to a market economy, the state of many countries’ economies and the international textile industry face considerable challenges. There are many uncertainties surrounding the global textile market, exacerbated by gloomy predictions that for a decade should have been eliminated, resulting in “free” trade flows. There is no doubt that manufacturers which have created niche markets will be better positioned to compete in the global marketplace and achieve higher margins for products while yielding greater profitability. This paper is an introduction of a reasearch that examines how some textile market niches have evolved. The goal of this paper is research and the role that textile niche markets will play by 2025. Specific objectives are: to give a broad overview of various trade theories, including classical, neo-classical, post-neo-classical, and modern, in order to determine what are the possibilities for development and protection. In particular, emphasis will be focused the special problems, due to the vector exchanges and commercial conjuncture, to illustrate how traditional marketing methods differ from market to market and to examine what role will play niche markets in the textiles industry and textile apparel industry in 2050. The results of this research study will help formulate a business strategy that can be used in market capitalization and will provide a framework for research for textile researchers at a global level.

  20. Innovation, entrepreneurship and textiles

    Science.gov (United States)

    Blanton Godfrey, A.; Pourmojib, S.

    2017-10-01

    Innovation and entrepreneurship have become increasingly important parts of economic development in almost every country, region, and community. In this research we investigate the reasons people become entrepreneurs in the textile and apparel industries and compare entrepreneurship in these industries with other industries looking also at the success factors for start up companies. During our research we found many disrupters, people entering the textile and apparel industries from outside often having no prior experience in textiles or apparel. We also investigate the impact of government intervention on entrepreneurship. In recognition of the large economic impact entrepreneurial companies have on economic development and job growth, almost all federal governments, regional governments, and community governments have created support for innovation and entrepreneurship.

  1. Applications of cyclodextrins in medical textiles - review.

    Science.gov (United States)

    Radu, Cezar-Doru; Parteni, Oana; Ochiuz, Lacramioara

    2016-02-28

    This paper presents data on the general properties and complexing ability of cyclodextrins and assessment methods (phase solubility, DSC tests and X-ray diffraction, FTIR spectra, analytical method). It focuses on the formation of drug deposits on the surface of a textile underlayer, using a cyclodextrin compound favoring the inclusion of a drug/active principle and its release onto the dermis of patients suffering from skin disorders, or for protection against insects. Moreover, it presents the kinetics, duration, diffusion flow and release media of the cyclodextrin drug for in vitro studies, as well as the release modeling of the active principle. The information focuses on therapies: antibacterial, anti-allergic, antifungal, chronic venous insufficiency, psoriasis and protection against insects. The pharmacodynamic agents/active ingredients used on cotton, woolen and synthetic textile fabrics are presented. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. THE NEED TO RECYCLE TEXTILE WASTES. LEGISLATIVE ASPECTS

    Directory of Open Access Journals (Sweden)

    TIMOFTE Claudia Simona

    2016-05-01

    Full Text Available The paper presents arguments and examples regarding the need to reuse, sort, manage and recycle more efficiently the textile wastes. Waste are increasing from a quantitative point of view and represent a major problem in each European country and the textile waste represent 5% of the total quantity of waste at a global level. It is estimated that about 95% of what it reaches the landfill could be reused so that the necessity of recycling is obvious. The constant need of transforming the wastes into by-products represents a priority because the textile waste have a special characteristic in the way that they can be reused or even repurposed. The paper also syhthesizes the legislation that makes reference to the textile waste, their classification and the obligations of the local community members, natural or legal persons. It is also presents the current situation of the textile waste with respect to Romania and Bihor county, but there are also presented other numerous cases, examples and situations in which the waste is recovered/collected properly. The examples have the role of showing and emphasizing the concerns of some companies, brands, institutions or local authorities, specialists and specialized personnel within the agencies of environmental protection to encourage recycling or reuse of the textile products that are inappropriately considered as wastes. The information for this paper was collected from literature, from the Agency of Environmental Protection Bihor and on the Internet.

  3. Hemp for textiles

    NARCIS (Netherlands)

    Westerhuis, W.

    2016-01-01

    Abstract Key words: Cannabis sativa L., day length sensitivity, fibre hemp, genotype, harvest time, plant density, plant weight, primary fibres, secondary fibres, sowing date, textiles. Westerhuis, W. (2016)

  4. Novel antimicrobial textiles

    Science.gov (United States)

    Cho, Unchin

    2003-10-01

    Many microorganisms can survive, and perhaps proliferate on textiles, generating adverse effects such as: disease transmission, odor generation, pH changes, staining, discoloration and loss of performance. These adverse effects may threaten users' health, deteriorate textile properties and degrade service quality. It may, therefore, be desirable to incorporate antimicrobials on textiles for controlling the growth of microorganisms. This dissertation focuses on the development of antimicrobial fibers and fabrics by integration of antimicrobials with these textiles. The applications of hydantoin-based halamines were mainly investigated in the research. The typical process is that hydantoin containing compounds are grafted onto textiles and transformed to halamine by chlorination. Hydantoin-based halamines are usually chloramines that release chlorine (Cl+) via cleavage of the -NCl functional group which attacks and kills microbes. The antimicrobial behavior is rechargeable many times by rinsing the fiber or fabric with chlorine-containing solution. Some quaternary ammonium type antimicrobials were also investigated in this research. The choice of integrating techniques is dependant on both the textile and antimicrobial compounds. In this dissertation, the nine approaches were studied for incorporating antimicrobial with various textiles: (1) co-extrusion of fibers with halamine precursor additive; (2) grafting of the quaternary ammonium compounds onto ethylene-co-acrylic acid fiber for creating quaternary ammonium type antimicrobial fiber; (3) entrapment of the additives in thermally bonded bicomponent nonwoven fabrics; (4) attaching antimicrobial additives to surfaces with latex adhesive coating; (5) grafting of antimicrobial compounds onto rubber latex via UV exposure; (6) reaction of halamine with needle-punched melamine formaldehyde nonwoven fabric and laminates; (7) coating melamine resin onto tent fabrics and laminates; (8) synthesis of super absorbent polymer

  5. A review of stimuli-responsive polymers for smart textile applications

    Science.gov (United States)

    Hu, Jinlian; Meng, Harper; Li, Guoqiang; Ibekwe, Samuel I.

    2012-05-01

    Stimuli-responsive polymers (SRPs) are smart materials which can show noticeable changes in their properties with environmental stimulus variations. Novel functionalities can be delivered to textiles by integrating smart SRPs into them. SRPs inclusive of thermal-responsive polymers, moisture-responsive polymers, thermal-responsive hydrogels, pH-responsive hydrogels, and light-responsive polymers have been applied in textiles to improve or achieve textile smart functionalities. The functionalities include aesthetic appeal, comfort, textile soft display, smart controlled drug release, fantasy design with color changing, wound monitoring, smart wetting properties and protection against extreme variations in environmental conditions. In this review, the applications of SRPs in the textile and clothing sector are elucidated; the associated constraints in fabrication processes for textiles and their potential applications in the near future are discussed.

  6. Textile industry and occupational cancer.

    Science.gov (United States)

    Singh, Zorawar; Chadha, Pooja

    2016-01-01

    Thousands of workers are engaged in textile industry worldwide. Textile industry involves the use of different kinds of dyes which are known to possess carcinogenic properties. Solvents used in these industries are also associated with different health related hazards including cancer. In previous studies on textile and iron industries, the authors have reported genotoxicity among them and observed occurrence of cancer deaths among textile industry workers. Thus, an attempt has been made to compile the studies on the prevalence of different types of cancers among textile industry workers. A wide literature search has been done for compiling the present paper. Papers on cancer occurrence among textile industry workers have been taken from 1976 to 2015. A variety of textile dyes and solvents, many of them being carcinogenic, are being used worldwide in the textile industry. The textile industry workers are therefore, in continuous exposure to these dyes, solvents, fibre dusts and various other toxic chemicals. The present study evaluates the potential of different chemicals and physical factors to be carcinogenic agents among occupationally exposed workers by going through various available reports and researches. Papers were collected using different databases and a number of studies report the association of textile industry and different types of cancer including lung, bladder, colorectal and breast cancer. After going through the available reports, it can be concluded that workers under varied job categories in textile industries are at a higher risk of developing cancer as various chemicals used in the textile industry are toxic and can act as potential health risk in inducing cancer among them. Assessing the cancer risk at different job levels in textile industries may be found useful in assessing the overall risk to the workers and formulating the future cancer preventive strategies.

  7. Modeling the costs and benefits of dam construction from a multidisciplinary perspective.

    Science.gov (United States)

    Brown, Philip H; Tullos, Desiree; Tilt, Bryan; Magee, Darrin; Wolf, Aaron T

    2009-07-01

    Although the benefits of dam construction are numerous, particularly in the context of climate change and growing global demand for electricity, recent experience has shown that many dams have serious negative environmental, human, and political consequences. Despite an extensive literature documenting the benefits and costs of dams from a single disciplinary perspective, few studies have simultaneously evaluated the distribution of biophysical, socio-economic, and geopolitical implications of dams. To meet the simultaneous demands for water, energy, and environmental protection well into the future, a broader view of dams is needed. We thus propose a new tool for evaluating the relative costs and benefits of dam construction based on multi-objective planning techniques. The Integrative Dam Assessment Modeling (IDAM) tool is designed to integrate biophysical, socio-economic, and geopolitical perspectives into a single cost/benefit analysis of dam construction. Each of 27 different impacts of dam construction is evaluated both objectively (e.g., flood protection, as measured by RYI years) and subjectively (i.e., the valuation of said flood protection) by a team of decision-makers. By providing a visual representation of the various costs and benefits associated with two or more dams, the IDAM tool allows decision-makers to evaluate alternatives and to articulate priorities associated with a dam project, making the decision process about dams more informed and more transparent. For all of these reasons, we believe that the IDAM tool represents an important evolutionary step in dam evaluation.

  8. Release of titanium dioxide from textiles during washing.

    Science.gov (United States)

    Windler, L; Lorenz, C; von Goetz, N; Hungerbühler, K; Amberg, M; Heuberger, M; Nowack, B

    2012-08-07

    Nano-TiO(2) has the highest production of all nanomaterials, and pigment-TiO(2) is a commodity used on the million tons/year scale. Information on the release of TiO(2) from consumer products is therefore an important part of analyzing the potential environmental exposure to TiO(2). For this study, we investigated the release of TiO(2) from six different functional textiles during washing. TiO(2) is used in textiles because of its UV-absorbing properties and as pigment. Analysis of fiber cross sections showed that the TiO(2) was contained in the fiber matrix. The sun-protection textiles had Ultraviolet Protection Factors that were between 58 and 6100 after washing and therefore above the labeled factor of 50+. Five of the textiles (sun-protection clothes) released low amounts of Ti (0.01 to 0.06 wt % of total Ti) in one wash cycle. One textile (with antimicrobial functionality) released much higher amounts of Ti (5 mg/L, corresponding to 3.4 wt % of total Ti in one wash cycle). Size fractionation showed that about equal amounts were released as particles below and above 0.45 μm. After 10 washings, only in two textiles significantly lower Ti contents were measured. Electron microscopy showed that the TiO(2) particles released into washing solution had a roundish appearance with primary particle sizes between 60 and 350 nm that formed small aggregates with up to 20 particles. The results indicate that functional textiles release some TiO(2) particles, but that the amounts are relatively low and mostly not in the nanoparticulate range.

  9. Reported tailings dam failures

    Energy Technology Data Exchange (ETDEWEB)

    Rico, M. [CSIC - Instituto Pirenaico de Ecologia, Zaragoza (Spain)], E-mail: mayterico@ipe.csic.es; Benito, G. [CSIC - Centro de Ciencias Medioambientales, Madrid (Spain); Salgueiro, A.R. [CERENA - Centro de Recursos Naturais e Ambiente of IST, Lisboa (Portugal); Diez-Herrero, A. [Geological Hazards Unit, Spanish Geological Survey (IGME), Madrid (Spain); Pereira, H.G. [CERENA - Centro de Recursos Naturais e Ambiente of IST, Lisboa (Portugal)

    2008-04-01

    A detailed search and re-evaluation of the known historical cases of tailings dam failure was carried out. A corpus of 147 cases of worldwide tailings dam disasters, from which 26 located in Europe, was compiled in a database. This contains six sections, including dam location, its physical and constructive characteristics, actual and putative failure cause, sludge hydrodynamics, socio-economical consequences and environmental impacts. Europe ranks in second place in reported accidents (18%), more than one third of them in dams 10-20 m high. In Europe, the most common cause of failure is related to unusual rain, whereas there is a lack of occurrences associated with seismic liquefaction, which is the second cause of tailings dam breakage elsewhere in the world. Moreover, over 90% of incidents occurred in active mines, and only 10% refer to abandoned ponds. The results reached by this preliminary analysis show an urgent need for EU regulations regarding technical standards of tailings disposal.

  10. Emotional Value of Applied Textiles

    DEFF Research Database (Denmark)

    Bang, Anne Louise

    2011-01-01

    textiles. 2) Understanding and exploring emotional value related to design of applied textiles. In chapter four I argue – based on Jesse Prinz’s and Antonio Damasio’s emotion research – for a perception of emotional value of applied textiles which acknowledges bodily feedback as a core concept...... at Gabriel face while trying to implement an innovative and process-oriented business strategy. The focal point has been the section of the strategy which aims at developing Blue Ocean products, which have a functional and an emotional value for the user. The thesis examines and explores emotional value...... of applied textiles. The objective is to operationalise the strategic term ‘emotional value’ as it relates to applied textiles. The procedure includes the development of user- and stakeholder-centred approaches, which are valuable for the textile designer in the design process. The research approach...

  11. Optical textile tests MRI patients from afar

    Science.gov (United States)

    Gould, Paula

    2008-11-01

    Researchers in Europe have developed a wearable textile fitted with optical sensors that could be used to remotely monitor a patient's breathing patterns while they undergo magnetic resonance imaging (MRI) scans. The new textile will allow medical staff to keep an eye on children and other vulnerable patients who often have to be calmed with sedatives or anaesthetic drugs to keep them still during a scan. The technique will be particularly useful if proposed European Union (EU) legislation that is designed to protect medical staff from being exposed to the high magnetic fields of MRI systems comes into force in 2012. The new rules would prevent nurses from being in the room where the scan is taking place.

  12. Thermal-Insulation Properties of Multilayer Textile Packages

    Directory of Open Access Journals (Sweden)

    Matusiak Małgorzata

    2014-12-01

    Full Text Available Thermal-insulation properties of textile materials play a significant role in material engineering of protective clothing. Thermal-insulation properties are very important from the point of view of thermal comfort of the clothing user as well as the protective efficiency against low or high temperature. Thermal protective clothing usually is a multilayer construction. Its thermal insulation is a resultant of a number of layers and their order, as well as the thermalinsulation properties of a single textile material creating particular layers. The aim of the presented work was to investigate the relationships between the thermal-insulation properties of single materials and multilayer textile packages composed of these materials. Measurement of the thermal-insulation properties of single and multilayer textile materials has been performed with the Alambeta. The following properties have been investigated: thermal conductivity, resistance and absorptivity. Investigated textile packages were composed of two, three and four layers made of woven and knitted fabrics, as well as nonwovens. On the basis of the obtained results an analysis has been carried out in order to assess the dependency of the resultant values of the thermal-insulation properties of multilayer packages on the appropriate values of particular components.

  13. Microencapsulated citronella oil for mosquito repellent finishing of cotton textiles.

    Science.gov (United States)

    Specos, M M Miró; García, J J; Tornesello, J; Marino, P; Vecchia, M Della; Tesoriero, M V Defain; Hermida, L G

    2010-10-01

    Microcapsules containing citronella essential oil were prepared by complex coacervation and applied to cotton textiles in order to study the repellent efficacy of the obtained fabrics. Citronella released from treated textiles was indirectly monitored by the extractable content of its main components. Repellent activity was assessed by exposure of a human hand and arm covered with the treated textiles to Aedes aegypti mosquitoes. Fabrics treated with microencapsulated citronella presented a higher and longer lasting protection from insects compared to fabrics sprayed with an ethanol solution of the essential oil, assuring a repellent effect higher than 90% for three weeks. Complex coacervation is a simple, low cost, scalable and reproducible method of obtaining encapsulated essential oils for textile application. Repellent textiles were achieved by padding cotton fabrics with microcapsules slurries using a conventional pad-dry method. This methodology requires no additional investment for textile finishing industries, which is a desirable factor in developing countries. Copyright © 2010 Royal Society of Tropical Medicine and Hygiene.

  14. Comparative toxicity of leachates from 52 textiles to Daphnia magna.

    Science.gov (United States)

    Dave, Göran; Aspegren, Pia

    2010-10-01

    The environmental aspects of textiles are very complex and include production, processing, transport, usage, and recycling. Textiles are made from a variety of materials and can contain a large number of chemicals. Chemicals are used during production of fibres, for preservation and colouring and they are released during normal wear and during washing. The aim of this study was to investigate the release to water of toxic chemicals from various textiles. Altogether 52 samples of textiles made from cotton (21), linen (4), cotton and linen (7), cellulose (3), synthetic fibres (7), cotton and synthetic fibres (8) and wool (2). Seven were eco-labelled. All textiles were cut into squares and placed into Petri dishes with 50 ml ISO test medium in a concentration series (4-256 cm(2)/50 ml) and tested for acute toxicity to Daphnia magna. Estimated EC50s were converted into weight/volume, and 48-h EC50s ranged between 182 g/L. It was not possible to detect any difference between fibre type and toxicity (ANOVA), but a significantly higher toxicity was found for printed versus unprinted cotton and cotton/linen textiles, while the opposite was found for synthetic textiles. Eco-labelled products were evenly distributed on a toxicity scale, which means that eco-labelling in its present form does not necessarily protect users or the environment from exposure to toxic chemicals. Therefore, the results from the present study suggest that bioassays and toxicity tests should become an integrated part of textile environmental quality control programs. Copyright © 2010 Elsevier Inc. All rights reserved.

  15. 21 CFR 177.2800 - Textiles and textile fibers.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Textiles and textile fibers. 177.2800 Section 177.2800 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use Only as Components of Articles Intended for Repeated Use...

  16. Textiles and clothing sustainability recycled and upcycled textiles and fashion

    CERN Document Server

    2017-01-01

    This book discusses in detail the concepts of recycling and upcycling and their implications for the textiles and fashion sector. In addition to the theoretical concepts, the book also presents various options for recycling and upcycling in textiles and fashion. Although recycling is a much-developed and widely used concept, upcycling is also gaining popularity in the sector.

  17. DAM-LAKEFRONT PLAZA: Revitalization of an Agriculture Reservoir Dam in Kashar-Tirana/Albania

    Directory of Open Access Journals (Sweden)

    Valbona Koçi

    2014-12-01

    Full Text Available The Dam-Lakefront Plaza in Kashar-Tirana/Albania is a research project that proposes not only the re-consideration and reinforcement of the artificial Reservoirs Dams built during Socialism in Albania, but envisions the maintenance of dams and revitalization of the lakeside area promoting the public-private collaboration. In addition, it envisions the generation of qualitative and lively public spaces in sub-urban areas as well. Admitting the artificial lakes as specific nodes of man-made infrastructure in the landscape, and consequently the dams (together with the drainage channels as important hydrotechnic elements of the flood protection infrastructure, this research intends to elaborate on one type of landscape infrastructure - the vertical screens, offering a mediation between the natural and built landscape.

  18. Dam Failure Effects on Local/Regional Critical Infrastructures

    Directory of Open Access Journals (Sweden)

    Pîrvuleţu Marius-Eugen

    2016-09-01

    Full Text Available The paper will focus on multi-hazard assessment following the failure of the Ezer dam on Jijia river. All induced risks are analyzed in terms of critical infrastructure protection, considering three possible failure scenarios.

  19. Greening textile industry in Vietnam

    NARCIS (Netherlands)

    Nguyen Thi Phuong, L.

    2011-01-01

        The textile and garment industry has made a remarkable contribution to the economic development of Vietnam and employs currently a large labor force of 2.5 million people.However, the textile industry is also seen as a most polluting and unsustainable industry due to the use of

  20. Allegheny County Dam Locations

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset shows the point locations of dams in Allegheny County. If viewing this description on the Western Pennsylvania Regional Data Center’s open data portal...

  1. Physical tools for textile creativity and invention

    DEFF Research Database (Denmark)

    Heimdal, Elisabeth Jacobsen; Lenau, Torben Anker

    2010-01-01

    Two textile research projects (one completed and one ongoing) are described, where physical inspirational tools are developed and tested with the aim of stimulating textile creativity and invention, i.e. the use of textile materials in new kinds of products, thus bringing textiles into new contexts...

  2. The Mycenaean Palace-Organised Textile Industry

    DEFF Research Database (Denmark)

    Nosch, Marie-Louise Bech

    2008-01-01

    Investigation of the textile production in af tekstilprodutionen in Linear B archives. The administration of the textile prodution is compared to the administration of land holdings.......Investigation of the textile production in af tekstilprodutionen in Linear B archives. The administration of the textile prodution is compared to the administration of land holdings....

  3. Assessment of respiratory symptoms and lung function among textile ...

    African Journals Online (AJOL)

    2011-04-06

    Apr 6, 2011 ... Objective:A cross-sectional study was undertaken to determine the prevalence of respiratory symptoms and pulmonary functions among Textile Workers in ... creating the need for a system of protecting workers' health and ensuring their ..... cigarette smoking among the exposed workers. Lung function tests.

  4. MILITARY TEXTILE MATERIALS FOR EXTREME WEATHER CONDITIONS

    Directory of Open Access Journals (Sweden)

    TSOUTSEOS Athanasios

    2017-05-01

    Full Text Available Despite the leaps in technology in warfare and modern weaponry, the human soldier remains the most important aspect of a competitive army. Military textile materials are an essential, yet often neglected, factor that protect the soldier and enable his or her actions in varying fields around the globe. The participation of most countries in larger military or peacekeeping organisations like the NATO and the UN involves the extension of the geographical areas of activity in environments varying greatly from the soldiers’ country of origin. Protection from the varying weather conditions and comfort are important factors for the optimal operational ability of a person in humanitarian actions or at combat field. Research in performance textiles has given rise to various forms of multilayered clothing and functional membranes with several commercial tradenames. These performance textiles aim at specialized sports and recreational activities as mountain climbing, hiking and cycling, among others. Additional advancements involve even more specialized function like the incorporation of microelectronics monitoring of vital signals of the human body or for the control of equipment. The incorporation of such technological advancements is a current challenge for the national and international military forces that inherit a set of strict procedures. These procedures involve standardization, detailed technical descriptions, cost and of course customs particular to each force. On the other hand, the advancements cannot be neglected and the numbers of soldiers involved are significant to enable the need for change. Current paper is concentrated on the clothing and fabric developments relating to the protection of the soldiers from extreme weather conditions.

  5. Atomic layer deposition on polymer fibers and fabrics for multifunctional and electronic textiles

    Energy Technology Data Exchange (ETDEWEB)

    Brozena, Alexandra H.; Oldham, Christopher J.; Parsons, Gregory N., E-mail: gnp@ncsu.edu [Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, North Carolina 27695-7905 (United States)

    2016-01-15

    Textile materials, including woven cotton, polymer knit fabrics, and synthetic nonwoven fiber mats, are being explored as low-cost, flexible, and light-weight platforms for wearable electronic sensing, communication, energy generation, and storage. The natural porosity and high surface area in textiles is also useful for new applications in environmental protection, chemical decontamination, pharmaceutical and chemical manufacturing, catalytic support, tissue regeneration, and others. These applications raise opportunities for new chemistries, chemical processes, biological coupling, and nanodevice systems that can readily combine with textile manufacturing to create new “multifunctional” fabrics. Atomic layer deposition (ALD) has a unique ability to form highly uniform and conformal thin films at low processing temperature on nonuniform high aspect ratio surfaces. Recent research shows how ALD can coat, modify, and otherwise improve polymer fibers and textiles by incorporating new materials for viable electronic and other multifunctional capabilities. This article provides a current overview of the understanding of ALD coating and modification of textiles, including current capabilities and outstanding problems, with the goal of providing a starting point for further research and advances in this field. After a brief introduction to textile materials and current textile treatment methods, the authors discuss unique properties of ALD-coated textiles, followed by a review of recent electronic and multifunctional textiles that use ALD coatings either as direct functional components or as critical nucleation layers for active materials integration. The article concludes with possible future directions for ALD on textiles, including the challenges in materials, manufacturing, and manufacturing integration that must be overcome for ALD to reach its full potential in electronic and other emerging multifunctional textile systems.

  6. Textile production in Quartier Mu

    DEFF Research Database (Denmark)

    Cutler, Joanne Elisabeth; Andersson Strand, Eva Birgitta; Nosch, Marie-Louise Bech

    2013-01-01

    , geographical and chronological factors.  In contrast, recent research has considered some aspects of shape as an expression of loom weight function. This new approach, which draws on experimental archaeology, has made it possible to render textile craft visible, even if the textiles themselves...... are not preserved (Mårtensson et al. 2009). It is this approach that has been adopted in the following analysis of the loom weights from Quartier Mu. The chapter divided into four parts. The first part gives an outline of general textile techniques and presents the methodology. The second part consists...

  7. Auxetic warp knit textile structures

    Energy Technology Data Exchange (ETDEWEB)

    Alderson, Kim; Alderson, Andrew; Anand, Subhash; Simkins, Virginia; Nazare, Shonali; Ravirala, Naveen [Institute for Materials Research and Innovation, The University of Bolton, Deane Road, Bolton BL3 5AB (United Kingdom)

    2012-07-15

    The design, manufacturing and characterization of warp knit textile structures with enhanced drapeability and energy absorption is reported in this paper. Four textile structures were produced, all based on a triangular or double arrowhead structure, which is known to lead to a negative Poisson's ratio {nu}. Mechanical testing has confirmed that textile structures can be produced which are auxetic at {+-} 45 to the warp direction, with {nu} of up to -0.22 {+-} 0.03. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  8. Effects of WTO on the Textile Industry on Developing Countries

    Directory of Open Access Journals (Sweden)

    Syed Abdul Sattar Shah

    2013-07-01

    Full Text Available The current investigates the Effects of WTO on the Textile Industry on Developing Countries. Data were collected from various secondary sources and data is analyzed by using SPSS-20 version statistical software. It was revealed that WTO more industrialized countries consented to export fewer textiles while less industrialized countries enjoyed increased quotas for exporting their textiles. Bangladesh was expected to suffer the most from the ending of the MFA because it was expected to face more competition, particularly from China, it has tried to maintain its competitiveness in the post-quota era. It was further revealed that It has also been examined that all over the world textile industries are facing high inflation which is the hottest issue due to which the cost of doing business is going higher and higher day by day. The Chinese, Indian, Sri Lankan and Bangladeshi textile manufacturers are also out of those affected ones whose major issues are associated with increased cost of production. China’s dominance of the global garments trade has also been affected due to the rise in the costs of material, labour, energy, environmental protection and high interest rate. Furthermore, the environmental standard is also a barrier to many Chinese enterprises; even most of the Chinese enterprises have inputted environmental Standard.

  9. 25 CFR 309.13 - What are examples of other weaving and textiles that are Indian products?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are examples of other weaving and textiles that are Indian products? 309.13 Section 309.13 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.13 What are examples of other weaving and textiles that...

  10. Walden North Dam overtopping : emergency response and rehabilitation

    Energy Technology Data Exchange (ETDEWEB)

    Dyer, S. [FortisBC Inc., South Slocan, BC (Canada); McCreanor, J. [Acres International Ltd., Calgary, AB (Canada); Cronin, D.L.R.; Daw, D. [Acres International Ltd., Vancouver, BC (Canada)

    2004-09-01

    This paper described the events that led to the overtopping of the Walden North Dam during a heavy rainfall in June 2002, resulting in a breach around an abutment wall. The dam is part of a run-of-river hydro development on Cayoosh Creek near Lillooet, British Columbia. The Walden North Dam was a low, 46 meter wide concrete dam with a single radial gate. The dam overtopping was attributed to failure of the radial gate hoist. Prior to this event, the dam had been classified by the British Columbia Dam Safety Authorities as a high and then a low consequence category of failure. As facility managers, Aquila Networks Canada Ltd. established an immediate action plan to stabilize the situation and resume normal power production by applying the following priorities: (1) ensure safety of workers and the public, (2) limit further damage to the dam and other facilities, (3) ensure environmental protection, and (4) continue to operate the generation units. Local authorities were informed to evacuate a downstream campsite and environmental agencies were contacted along with safety regulators. Repairs included demolition of the damaged portion of the structure and construction a new two-bay gate/stoplog spillway and bridge. Construction was completed by September 2003 according to the requirements of the Department of Fisheries and Oceans for minimum flow, accurate control of fish flows and environmental monitoring of the stream area. 10 figs.

  11. Supplementation with methyl donors during lactation to high-fat-sucrose-fed dams protects offspring against liver fat accumulation when consuming an obesogenic diet.

    Science.gov (United States)

    Cordero, P; Milagro, F I; Campion, J; Martinez, J A

    2014-10-01

    Methyl donor supplementation has been reported to prevent obesity-induced liver fat accumulation in adult rats. We hypothesized that this protection could be mediated by perinatal nutrition. For this purpose, we assessed the response to an obesogenic diet (high-fat-sucrose, HFS) during adulthood depending on maternal diet during lactation. Female Wistar rats fed control diet during pregnancy were assigned to four postpartum dietary groups: control, control supplemented with methyl donors (choline, betaine, folic acid, vitamin B12), HFS and HFS supplemented with methyl donors. At weaning, the male offspring was transferred to a chow diet and at week 12th assigned to a control or a HFS diet during 8 weeks. The offspring whose mothers were fed HFS during lactation showed increased adiposity (19%, Pobesogenic diet in the adult progeny. Interestingly, dietary methyl donor supplementation in lactating mothers fed an obesogenic diet reduced liver fat accumulation, but increased adipose tissue storage in adult HFS-fed offspring.

  12. Key Elements of Protection for Military Textiles

    Science.gov (United States)

    2010-10-15

    treated 100% cotton. Other units wear a woven composite consisting of 65% FR rayon, 25% para-aramid and 10% nylon, marketed as Defender-M™. Note...is an impor- tant area of research for industry, academia and governments. Currently at least one company is already marketing an active camoufl age...Superhydrophobic, superoleophobic, hydroentangled nonwoven fabric, in press. Wagner , N. and Brady , J. (2009) Shear thickening in colloidal dispersions

  13. Limnology of hartbeespoort dam

    CSIR Research Space (South Africa)

    Ashton, PJ

    1985-01-01

    Full Text Available consequences, for example the proliferation of filter clogging algae. Pilot or full-scale experimentation will be necessary to establish the true poten tial of this technique as a in-dam method for dealing with eutrophied waters. (d) Protein harvesting... essential amino-acids and is therefore of little practical use. If the conditions in the dam could be changed to result in a more palatable algae, this will have definite advantages (vi) for its protein production potential. Unfortunately, the factors...

  14. TEXTILE IMPACT PLATES FOR NANOPARTICLES

    National Research Council Canada - National Science Library

    VISILEANU Emilia; DUMITRESCU Iuliana; VARZARU Elena; MITRAN Cornelia; CHIRIAC Laura

    2017-01-01

    The paper presents textile materials with destination impact plates, having different surface architectures and active treatments for functionalization, with influence upon the aging process of nano-Ag and nano-CeO2...

  15. Textile Manufacturing Sector (NAICS 313)

    Science.gov (United States)

    Find environmental regulatory and compliance information for the textile and leather manufacturing sector, including NESHAPs for leather tanning and fabric printing, and small business guidance for RCRA hazardous waste requirements.

  16. Dam health diagnosis and evaluation

    Science.gov (United States)

    Wu, Zhongru; Su, Huaizhi

    2005-06-01

    Based on the bionics principle in the life sciences field, we regard a dam as a vital and intelligent system. A bionics model is constructed to observe, diagnose and evaluate dam health. The model is composed of a sensing system (nerve), central processing unit (cerebrum) and decision-making implement (organism). In addition, the model, index system and engineering method on dam health assessment are presented. The proposed theories and methods are applied to evaluate dynamically the health of one concrete dam.

  17. Maternal exposure to diets containing flaxseed flour or flaxseed oil during pregnancy and lactation protects the aortic remodeling in adult male offspring of diabetic rat dams.

    Science.gov (United States)

    Vicente, Gabriela Câmara; Correia-Santos, André Manoel; Suzuki, Akemi; Velarde, Luis Guillermo Coca; Chagas, Maurício Alves; Boaventura, Gilson Teles

    2015-11-01

    Diabetes during pregnancy is associated with cardiovascular complications in the fetus and extends into adulthood. Therapeutic applications of flaxseed have been studied in cardiovascular disorders, because its oilseed is the best plant source of omega-3 fatty acid, which is currently considered by researchers to be an essential protective against cardiovascular disease. The aim of this study was to evaluate the influence of flaxseed flour and oil on cardiovascular biochemical parameters and the histoarchitecture of the aorta in adult rats which were offspring of diabetic mothers. At 100 days of age in offspring it was observed that maternal consumption of a high-fat diet containing flaxseed oil (FOG) and flaxseed flour (FFG) did not affect the serum concentration of monocyte chemoattractant protein-1, vascular endothelial growth factor, cholesterol, triglycerides, high-density-, low-density- or very-low-density-lipoprotein cholesterol. However, the thickness of the intima media layer of the aorta was significantly smaller in FOG and FFG groups; the lumen area was similar among the groups; and a higher percentage of elastic fiber was found in FOG and FFG groups. These data suggest that the use of both flaxseed flour and its oil reduces the remodeling of the aorta; however; it has not been possible to modify the cardiovascular biochemical parameters. © 2014 Society of Chemical Industry.

  18. Recent researches concerning the obtaining of functional textiles based on conductive yarns

    Science.gov (United States)

    Leon, A. L.; Manea, L. R.; Hristian, L.

    2016-08-01

    Modem textile industry is influenced both by consumers' lifestyle and by novel materials. Functional textiles can be included into the group of technical textiles. The functional activity can be shortly interpreted as "sense - react - adapt" to the environment while traditional materials meet only passive protective role, a barrier between body and environment. Functional materials cross the conventional limits because they are designed for specific performances, being part of domains as: telemedicine, medicine, aeronautics, biotechnology, nanotechnology, protective clothes, sportswear, etc. This paper highlights the most recent developments in the field of using conductive yarns for obtaining functional textiles. Conductive fabrics can be done by incorporating into the textile structure the conductive fibers / yarns. The technologies differ from embroidering, sewing, weaving, knitting to braiding and obtaining nonwovens. The conductive fabrics production has a quickly growth because it is a high demand for these textiles used for data transfer in clothing, monitoring vital signs, germ-free garments, brain-computer interface, etc. Nowadays it is of high interest surface treatments of fibers/yarns which can be considered as a novel kind of textile finishing. There are presented some researches related to obtaining conductive yarns by coating PET and PP yarns with PANi conductive polymer.

  19. Dam of Ksob (Algeria)

    Energy Technology Data Exchange (ETDEWEB)

    Stucky, J.P.

    1981-01-01

    Design of a sediment by-pass. The Ksob dam was heightened in 1977 in order to increase its storage capacity. A sediment derivation tunnel by-passing the reservoir was designed for a second stage. It will be operated during floods and is expected to delay significantly important storage losses due to reservoir sedimentation.

  20. Application of cyclodextrins in textile processes;Aplicacao de ciclodextrinas em processos texteis

    Energy Technology Data Exchange (ETDEWEB)

    Andreaus, Juergen; Dalmolin, Mara C.; Oliveira Junior, Iguatemy B. de; Barcellos, Ivonete O., E-mail: jandr@furb.b [Universidade Regional de Blumenau, SC (Brazil). Dept. de Quimica

    2010-07-01

    Cyclodextrins (CDs) are water soluble cyclic sugars with a hydrophobic nanometric cavity that permits the formation of host/guest inclusion complexes with a large variety of molecules, alternating their physical-chemical properties. In the present review CD research related to the processing of textiles is revised and discussed. CDs may function as encapsulating, dispersing and levelling agents in the dyeing and washing of textiles. Furthermore they may be anchored to polymers and textile fibers in order to impart special properties such as odor reduction, UV protection or for the controlled release of perfumes, aromas, mosquito repellents or substances with therapeutical effects. (author)

  1. EXERGY OF TEXTILE MATERIALS

    Directory of Open Access Journals (Sweden)

    V. N. Romaniuk

    2015-01-01

    Full Text Available The article presents solution for the task of evaluating exergy of the substance in the flow for textile and woven fabrics based on thermodynamic analysis of the corresponding technical systems. The exergy method allows estimating the energy effectiveness for the most problematic heat-technological systems of substance transformation and thus outlining the ways for decreasing the electric-power component in the production prime cost. The actuality of the issue stems from the renowned scenario alteration on the world energy market and is aggravated by necessity of retaining and building up the export potential of the light industry as an important component of the republic national-economic complex. The exergy method has been here for quite a long time and saw the interest fading and appearing again with periodicity of the research-generations alternation. Cooling down of every new generation towards the specified method is explained mostly by unresolved problem of the exergy evaluation for diverse materials, which poses a problem in the course of analysis of the substance transformation systems. The specified problem as a general rule does not create obstacles for energyconversion systems. However, the situation with substance-transformation systems is by far more complicated primarily due to diversity of the materials and respectively of the specification peculiarities of such component of the substance exergy in the flow as chemical component. Abeyance of conclusion in finding the chemical component of the substance exergy does not allow performing thermodynamic valuation of the energy provision for the heat-technological process in full measure. Which complicates the matters of decision-making and finding a medium for reduction of their energy consumption. All stated above relates to the textile industry and in the first instance to the finishing production departments.The authors present the exergy-evaluation problem solution for the

  2. North European Symposium for Archaeological Textiles X

    DEFF Research Database (Denmark)

    Proceedings of the Tenth North European Symposium for Archaeological Textiles, held in Copenhagen, 14-17 May 2008......Proceedings of the Tenth North European Symposium for Archaeological Textiles, held in Copenhagen, 14-17 May 2008...

  3. Scope of nanotechnology in modern textiles

    Science.gov (United States)

    This review article demonstrates the scope and applications of nanotechnology towards modification and development of advanced textile fibers, yarns and fabrics and their processing techniques. Basically, it summarizes the recent advances made in nanotechnology and its applications to cotton textil...

  4. 19 CFR 102.25 - Textile or apparel products under the North American Free Trade Agreement.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Textile or apparel products under the North American Free Trade Agreement. 102.25 Section 102.25 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY RULES OF ORIGIN Rules of Origin § 102.25 Textile or apparel products under the North...

  5. Textile paper as a circular material

    OpenAIRE

    Ashok, Archana

    2017-01-01

    Increasing resource efficiency by utilising secondary raw material is one of the key characteristics of a circular economy. Textile dust fibre, a waste generated from textile mechanical recycling has the prospect to be utilised as secondary raw material for producing novel material: textile paper suitable for packaging and other applications. A comparative Life Cycle Assessment (LCA) of carrier bags made from one ton of virgin paper, recycled paper and novel textile paper (~22584paper bags wi...

  6. Bioremediation of textile effluent using Phanerochaete chrysosporium

    African Journals Online (AJOL)

    Enormous volumes of effluent are generated at different stages of textile manufacturing, as a result of the use of copious amounts of chemicals and dyes. Several tons of textiles required to meet up with societal demands are produced daily in this industry. Effluent derived from the textile and dyestuff activities can provoke ...

  7. Emerging research trends in medical textiles

    CERN Document Server

    Gokarneshan, N; Rajendran, V; Lavanya, B; Ghoshal, Arundhathi

    2015-01-01

    This book provides a comprehensive review of the significant researches reported during the recent years in the field of medical textiles. It also highlights the use of new types of fibres in developing medical textile products and their promising role in the respective areas of application. Considerable developments have taken place in the development of medical textiles for varied applications.

  8. Mecanique et mecanisme de la dechirure des materiaux textiles

    Science.gov (United States)

    Triki, Ennouri

    Cette thèse vise à apporter une contribution à l’étude et à la modélisation de la déchirure des textiles et des textiles enduits. Notons que la résistance à la déchirure est l’une des caractéristiques mesurées pour les équipements de protection contre les agresseurs mécaniques en milieu de travail. Jusqu'à présent, ce comportement en déchirure a été étudié en mesurant la force de déchirure et le travail de déchirure. De fait, aucun critère de rupture en déchirure n’existe actuellement. Par conséquent, en s’inspirant de la théorie du Griffith et de la mécanique de la rupture, une formulation d’un nouveau critère de rupture des structures textiles a été proposée. Cette approche offre la possibilité de déterminer d’une manière plus précise l’énergie nécessaire pour la création d’une nouvelle surface de rupture. Ce critère nous permet d’analyser l’effet des caractéristiques des tissus sur la variation de l’énergie de rupture. Cette étude montre que la résistance au glissement des fils dans la structure est le principal facteur qui contrôle la propagation de la fissure. En se basant sur la théorie de la mécanique de la rupture, un modèle de calcul de l’énergie de rupture par déchirure a été aussi élaboré. Ce modèle de déchirure relie l’énergie aux paramètres caractérisant les phénomènes affectant la déchirure des tissus, notamment la force de glissement et la force à la rupture des fils. Cette modélisation a tenu compte de certaines caractéristiques des tissus tels que l’épaisseur du matériau, la densité des fils, etc. Par l’étude de la variation de l’énergie de rupture par déchirure en fonction du rapport établi entre la force à la rupture et la force de glissement d’un fil ( FYB/FS), l’effet des mécanismes de la propagation de la fissure dans les tissus sur leur comportement en déchirure a été aussi observé. Les résultats obtenus permettent de distinguer

  9. Risk Perception Analysis Related To Existing Dams In Italy

    Science.gov (United States)

    Solimene, Pellegrino

    2013-04-01

    In the first part of this work, the progress of Italian National Rules about dams design, construction and operation are presented to highlight the strong connection existing between the promulgation of new decrees, as a consequence of a dam accidents, and the necessity to prevent further loss of lives and goods downstream. Following the Gleno Dam failure (1923), a special Ministerial Committee wrote out the first Regulations and made the proposal to establish, within the High Council of Public Works, a special department that become soon the "Dam Service", with the tasks of control and supervision about construction and operation phases of the dams and their reservoirs. A different definition of tasks and the structure of Dam Service were provided in accordance with law n° 183/1989, which transferred all the technical services to the Office of the Prime Minister; the aim was to join the Dam Office with the Department for National Technical Services, with the objective of increasing the knowledge of the territory and promoting the study on flood propagation downstream in case of operations on bottom outlet or hypothetical dam-break. In fact, population living downstream is not ready to accept any amount of risk because has not a good knowledge of the efforts of experts involved in dam safety, both from the operators and from the safety Authority. So it's important to optimize all the activities usually performed in a dam safety program and improve the emergency planning as a response to people's primary needs and feeling about safety from Civil Protection Authority. In the second part of the work, a definition of risk is provided as the relationship existing between probability of occurrence and loss, setting out the range within to plan for prevention (risk mitigation), thanks to the qualitative assessment of the minimum safety level that is suited to assign funds to plan for Civil Protection (loss mitigation). The basic meaning of the reliability of a zoned

  10. Electrical Conductivity in Textiles

    Science.gov (United States)

    2006-01-01

    Copper is the most widely used electrical conductor. Like most metals, though, it has several drawbacks: it is heavy, expensive, and can break. Fibers that conduct electricity could be the solutions to these problems, and they are of great interest to NASA. Conductive fibers provide lightweight alternatives to heavy copper wiring in a variety of settings, including aerospace, where weight is always a chief concern. This is an area where NASA is always seeking improved materials. The fibers are also more cost-effective than metals. Expenditure is another area where NASA is always looking to make improvements. In the case of electronics that are confined to small spaces and subject to severe stress, copper is prone to breaking and losing connection over time. Flexible conductive fibers eliminate that problem. They are more supple and stronger than brittle copper and, thus, find good use in these and similar situations. While clearly a much-needed material, electrically conductive fibers are not readily available. The cost of new technology development, with all the pitfalls of troubleshooting production and the years of testing, and without the guarantee of an immediate market, is often too much of a financial hazard for companies to risk. NASA, however, saw the need for electrical fibers in its many projects and sought out a high-tech textile company that was already experimenting in this field, Syscom Technology, Inc., of Columbus, Ohio. Syscom was founded in 1993 to provide computer software engineering services and basic materials research in the areas of high-performance polymer fibers and films. In 1999, Syscom decided to focus its business and technical efforts on development of high-strength, high-performance, and electrically conductive polymer fibers. The company developed AmberStrand, an electrically conductive, low-weight, strong-yet-flexible hybrid metal-polymer YARN.

  11. Design Management in the Textile Industry

    DEFF Research Database (Denmark)

    Bang, Anne Louise

    2013-01-01

    In this paper we explore textile design activities and textile design management from an industrial network perspective. The textile industry is probably one of the most globalized manufacturing industries in the world and thus one of the most dispersed industries on the globe. Most studies...... on design management are framed inside the organisational context of the firm. In this study the role and practice of textile design is addressed in perspective of the global textile production network. The empirical data stems from six case studies exploring how different types of enterprises are organised...

  12. Los textiles rituales de Nasca en Cahuachi

    OpenAIRE

    Bastiand Atto, María Soledad

    2010-01-01

    El estudio de los textiles arqueológicos nos conduce a entender a una de las actividades productivas de mayor antigüedad en nuestro país, la actividad productiva textil, desarrollada durante 5 000 años. Tal es el caso, de la producción textil de la cultura Nasca desarrollada en el período Intermedio Temprano, de la época prehispánica. Una de las culturas más conocidas por su cerámica polícroma y sus complejos textiles. El presente estudio muestra una Colección Textil de Nasca Temprano,...

  13. Textile effluent biodegradation potentials of textile effluent-adapted ...

    African Journals Online (AJOL)

    Environmental pollution has been recognized as one of the major problems of the modern world. The increasing demand for water and the dwindling supply has made the treatment and reuse of industrial effluents an attractive option. Textile effluents are of concern because they colour the drains and ultimately the water ...

  14. Landfill liners from dam reservoir sediments

    Directory of Open Access Journals (Sweden)

    Koś Karolina

    2016-03-01

    Full Text Available Landfill liners from dam reservoir sediments. Every municipal solid waste landfill has to be properly secured to protect the natural environment from possible leachate. Most often an artificial sealing is used, which is based on a soil liner from cohesive soils (clays, silts. Usability evaluation of bottom sediments from Rzeszowski Reservoir for building these liners was presented in the paper. Sediments from dam reservoirs, gathered as a result of the siltation process, can be a valuable material for earthworks purposes. Determination of their possible ways of usage is important, especially before the planned dredging, because thanks to that this material will not be put on a heap. Based on the analysis of the geotechnical parameters of these sediments it was stated that this material can be preliminary allowed for using in liners.

  15. Storage solutions for excavated textiles tending to their recalcitrant behaviour

    DEFF Research Database (Denmark)

    Margariti, Christina; Loukopoulou, Polytimi

    2016-01-01

    This paper discusses the selection of packaging and storage means that facilitate the preservation, protection andmanagerial needs for a group of excavated textiles where their physical and chemical properties have been unrecognisably altered as a result of the burial process (in this case minera...... foam, copolymer polyethylene and polypropylene board, non-woven polyethylene fabric and the antistatic type of polyester film. All materials and methods applied exhibit great versatility and are potentially useful for conservators in similar situations....

  16. TEXTILE STRUCTURES FOR AERONAUTICS (PART II

    Directory of Open Access Journals (Sweden)

    SOLER Miquel

    2014-05-01

    Full Text Available Three-dimensional (3D textile structures with better delamination resistance and damage impact tolerance to be applied in composites for structural components is one of the main goals of the aeronautical industry. Textile Research Centre in Canet de Mar has been working since 2008 in this field. Our staff has been designing, developing and producing different textile structures using different production methods and machinery to improve three-dimensional textile structures as fiber reinforcement for composites. This paper describes different tests done in our textile labs from unidirectional structures to woven, knitted or braided 3 D textile structures. Advantages and disadvantages of each textile structure are summarized. The second part of this paper deals with our know-how in the manufacturing and assessing of three-dimensional textile structures during this last five years in the field of textile structures for composites but also in the development of structures for other applications. In the field of composites for aeronautic sector we have developed textile structures using the main methods of textile production, that is to say, weaving, warp knitting, weft knitting and braiding. Comparing the advantages and disadvantages it could be said that braided fabrics, with a structure in the three space axes are the most suitable for fittings and frames.

  17. Textile allergic contact dermatitis: current status.

    Science.gov (United States)

    Coman, Garrett; Blattner, Collin M; Blickenstaff, Nicholas R; Andersen, Rosa; Maibach, Howard I

    2014-01-01

    We conducted a thorough review of Pubmed search results for "textile percutaneous penetration" and "textile absorption". We also determined relevant articles that discussed percutaneous penetration of textiles into the skin and their associated disease states. Due to limitations in current and past publications, we are uncertain of the extent of the clinical problem; however, for patients allergic to textile dye, it is of practical importance, both clinically and in their everyday life. There are many challenges to correctly identifying the offending textile products in a patient with suspected textile dye dermatitis. Different populations may exhibit varying degrees of allergic contact dermatitis (ACD), but more studies must be done to draw further conclusions. This is further complicated when counseling the patient on how to avoid the textile products most likely to cause a recurrence of ACD skin lesions.

  18. Perception of naturalness in textiles

    NARCIS (Netherlands)

    Overvliet, Krista E.; Karana, Elvin; Soto-Faraco, Salvador

    2016-01-01

    In many daily contexts, we prefer natural 'materials' over un-natural ones. Textiles embodied in garments that are worn on the body all day, or in bed sheets slept under every night touch us literally, on a daily basis. Hence among all other materials, 'naturalness perception' has a strong impact on

  19. NICE3: Textile Brine Separation

    Energy Technology Data Exchange (ETDEWEB)

    Recca, L.

    1999-01-29

    The goal of this project is to demonstrate the significant energy and waste savings that can be realized by using nanofiltration technology to reuse textile dyebath brines. Read this new fact sheet to learn how this new membrane technology can benefit your business.

  20. Stalled ERP at Random Textiles

    Science.gov (United States)

    Brumberg, Robert; Kops, Eric; Little, Elizabeth; Gamble, George; Underbakke, Jesse; Havelka, Douglas

    2016-01-01

    Andre Raymond, Executive Vice President of Sales and Marketing for Random Textiles Co. Inc. (RTC), stood in front of the podium to address his team of 70 sales consultants in Las Vegas, NV. The organization had increased market share and achieved record sales over the past three years; however, in the shadow of this success lurked an obstacle that…

  1. Durable and Rechargeable Antimicrobial Textiles

    Science.gov (United States)

    2013-12-01

    textiles, to achieve powerful antimicrobial effiacy (see the following tasks). Reaction conditions have significant effects on grafting yields and...efficacy tests, all the microbial species were provided by the American Type Culture Collection (ATCC). Staphylococcus epidermidis (S. epidermidis...non-resistant bacteria. Candida albicans (C. albicans, ATCC 10231, fungi), a diploid fungus , was used as a representative example of fungi. As shown

  2. Textiles and Training in Portugal.

    Science.gov (United States)

    Andrez, Jaime Serrao; Dias, Mario Caldeira

    Analyzing the role of vocational training in an economic sector that is declining in Portugal, this document consists of five chapters, a bibliography, and a list of training organizations. An introduction tells why the study is important and explains that the major obstacles to development of the Portuguese textile and clothing sector are the…

  3. Integrated microelectronics for smart textiles.

    Science.gov (United States)

    Lauterbach, Christl; Glaser, Rupert; Savio, Domnic; Schnell, Markus; Weber, Werner

    2005-01-01

    The combination of textile fabrics with microelectronics will lead to completely new applications, thus achieving elements of ambient intelligence. The integration of sensor or actuator networks, using fabrics with conductive fibres as a textile motherboard enable the fabrication of large active areas. In this paper we describe an integration technology for the fabrication of a "smart textile" based on a wired peer-to-peer network of microcontrollers with integrated sensors or actuators. A self-organizing and fault-tolerant architecture is accomplished which detects the physical shape of the network. Routing paths are formed for data transmission, automatically circumventing defective or missing areas. The network architecture allows the smart textiles to be produced by reel-to-reel processes, cut into arbitrary shapes subsequently and implemented in systems at low installation costs. The possible applications are manifold, ranging from alarm systems to intelligent guidance systems, passenger recognition in car seats, air conditioning control in interior lining and smart wallpaper with software-defined light switches.

  4. Personal exposure between people in a room ventilated by textile terminals - with and without personalized ventilation

    DEFF Research Database (Denmark)

    Nielsen, P. V.; Hyldgaard, C.E.; Melikov, Arsen Krikor

    2005-01-01

    The investigation is made in a room ventilated by an air distribution system based on a textile terminal. The air distribution in the room is mainly controlled by buoyancy forces from the heat sources, although the flow from the textile terminal can be characterized as a passive displacement flow...... with a downward direction in areas without thermal load. The system is extended by a personalized ventilation system to study the improved protection of people in a room. The investigation involves full-scale experiments with two breathing thermal manikins. One manikin is the source and the other the target....... In general it is found that when the air is supplied from the textile terminal alone, the flow in the room is fully mixed with a limited protection of the occupants. It is shown that the personalized ventilation improves the protection of occupants by increasing the personal exposure index....

  5. TEXTILE STRUCTURES FOR AERONAUTICS (PART I

    Directory of Open Access Journals (Sweden)

    SOLER Miquel

    2014-05-01

    Full Text Available Three-dimensional (3D textile structures with better delamination resistance and damage impact tolerance to be applied in composites for structural components is one of the main goals of the aeronautical industry. Textile Research Centre in Canet de Mar has been working since 2008 in this field. Our staff has been designing, developing and producing different textile structures using different production methods and machinery to improve three-dimensional textile structures as fiber reinforcement for composites. This paper describes different tests done in our textile labs from unidirectional structures to woven, knitted or braided 3 D textile structures. Advantages and disadvantages of each textile structure are summarized. The first part of this paper deals with the introduction of our Textile Research Centre in the field of composites and carbon fiber as a main material to produce three – dimensional textile structures. The use of composite materials in aerospace structures has increased over the past decades. Our contribution related to this field consists of the development of three- dimensional textile structures and even the adaptation and improvement of machinery to do it possible. Carbon fiber provides advantages as volumetric fraction and minimum fault occurrence. However carbon fiber has also disadvantages as uncomfortable handling delamination and high cost of material and processing.

  6. The Textile Industry at Thebes in the Light of the Textile Industries at Pylos and Knossos

    DEFF Research Database (Denmark)

    Nosch, Marie-Louise Bech

    2001-01-01

    The paper investigates the textile production at Thebes, Greece, according to the Linear B tablets......The paper investigates the textile production at Thebes, Greece, according to the Linear B tablets...

  7. The Changing Political Dynamics of Dam Building on the Mekong

    Directory of Open Access Journals (Sweden)

    Philip Hirsch

    2010-06-01

    Full Text Available This paper explores political dynamics surrounding dam building in the Mekong river basin, prior to, and following, the World Commission on Dams (WCD. Since the 1950s, dam building in the Mekong river basin has been enmeshed in a complex and shifting geopolitical and eco-political landscape. The broad geopolitical sweep of US hegemony, Cold War, regional rapprochement and the rise of China has been superimposed on eco-political shifts between modernist belief in progress as mastery over nature, concerns of global and national environmental movements over dams and their impacts, and a galvanised Mekong environmentalism. During the first decade of the 21st century, mainstream dams on the Lower Mekong have returned to the agenda after having almost disappeared in favour of tributary projects. The growing strength and assertiveness of regional economic players has fundamentally altered the context of energy demand, planning and investment. New sources of finance have relocated the points of political leverage. Environment has been mustered in favour of, as well as in opposition to, dam construction in the contexts of climate-change discourses, protected-area linkage with dam projects, and an industry push for sustainability protocols and certification. Despite the Mekong being one of its focal basins, WCD has not played a prominent role in this transformed arena, yet many of the social and environmental concerns, stakeholder-based processes and safeguard-oriented approaches to hydropower planning that WCD brought to the fore have persisted in the wider ethos of politics around dams in the region.

  8. CYCLODEXTRINS TO RECOVER TEXTILE DYES IN WASTE WATER

    Directory of Open Access Journals (Sweden)

    FRANCO Esther

    2015-05-01

    Full Text Available Cyclodextrins are cyclic oligosaccharides with a special toroid shape, obtained by the action of glucosyltransferase enzyme (CGTase on starch molecule. Their peculiar structure allows the accommodation of different guest molecules inside their cavity forming molecular inclusion complexes. There are different types depending on the glucose units that are formed, called native. The cyclodextrins can be modified incorporating different groups (hydroxipropyl, methyl... that changes their properties. Due their versatility in size, properties and the variety of inclusion complex can form is employed in many different industries like pharmacy, food or cosmetics to protect the molecule or to reduce their volatility. As the guest molecule is not bond with the cyclodextrin with the appropriate conditions it can release easily. In textile industry had been use in different areas: to remove surfactants from washed textiles, to substitute surfactants, in the dyeing process, in detergents… Due their capacity to fix onto textile allows the functionalization of the fabrics giving them new properties like UV protection, antimicrobial or insect repellents depending on the guest molecule, in. The project DYES4EVER employs the cyclodextrins to encapsulate dyes not fixed during the dye process that remains in the wastewater and aims to go one step further and reuse the dyes recovered as a raw material in new dyeing processes.

  9. Damming evidence : Canada and the World Commission on Dams

    Energy Technology Data Exchange (ETDEWEB)

    Vert, P.; Parkinson, B.

    2003-06-01

    Large hydroelectric projects have been met with strong resistance from affected communities, particularly indigenous groups who have been displaced from their flooded communities following the damming of a river. The World Commission on Dams (WCD) was formed in 1998 to review the effectiveness of large dams and develop internationally acceptable guidelines and standards for large dams or hydro energy projects. The Canadian government, through the Canadian International Development Agency, was one of many governments to fund the WCD. However, the authors argue that despite the financial support, the Canadian government was absent from any effort to follow-up on the recommendations of the WCD. The seven strategic priorities in the decision making process include: (1) gaining public acceptance, (2) comprehensive option assessment of water, energy, food and development needs, (3) addressing existing dams to improve the benefits that can be derived from them, (4) sustaining livelihoods, (5) recognizing the entitlements and sharing benefits, (6) ensuring compliance, and (7) sharing rivers for peace, development and security. This report offers a means to assess planned or existing dams and presents a set of guidelines for good practices linked to the seven strategic priorities. Ten case studies from around the world were presented, including the Three Gorges Dam in China. 154 refs., 3 figs., 3 appendices.

  10. Thermoset composites reinforced with recycled cotton textile residues

    National Research Council Canada - National Science Library

    Zonatti, Welton Fernando; Guimarães, Bárbara Maria Gama; Duleba, Wânia; Ramos, Júlia Baruque

    2015-01-01

    The recycling of textiles is an issue that requires immediate attention in order to address the management of textiles derived from household waste, as well as scraps generated throughout manufacturing textile processes...

  11. Textile electrodes and integrated smart textile for reliable biomonitoring.

    Science.gov (United States)

    Paradiso, R; Pacelli, M

    2011-01-01

    Since birth the first and the most natural interface for the body is fabric, a soft, warm and reassuring material. Cloth is usually covering more than 80 % of the skin; which leads us to consider textile material as the most appropriate interface where new sensorial and interactive functions can be implemented. The new generation of personalised monitoring systems is based on this paradigm: functions like sensing, transmission and elaboration are implementable in the materials through the textile technology. Functional yarns and fibres are usable to realise garments where electrical and computing properties are combined with the traditional mechanical characteristics, giving rise to textile platforms that are comparable with the cloths that are normally used to produce our garments. The feel of the fabric is the same, but the functionality is augmented. Nowadays, consumers demand user-friendly connectivity and interactivity; sensing clothes are the most natural and ordinary interface able to follow us, everywhere in a non-intrusive way, in natural harmony with our body.

  12. Investigation of Thermo-regulating Properties of Multilayer Textile Package

    Directory of Open Access Journals (Sweden)

    Julija Baltušnikaitė

    2015-09-01

    Full Text Available Thermal comfort of a clothing system is one of the important goals of the developer that require an engineering approach. In this research work a thermo-regulating textile packages were developed and a wearing comfort of protective clothing consisting from those packages was improved. The microcapsules were added on the fabric surface using pad-dry-cure method. The thermal properties and stabilities were measured using differential scanning calorimetry. The results suggest that higher values of thermal resistance were obtained after incorporation of fabric, coated by PCMs, into inert layer of multilayer textile package. DOI: http://dx.doi.org/10.5755/j01.ms.21.3.6920

  13. Textiles and clothing sustainability nanotextiles and sustainability

    CERN Document Server

    2017-01-01

    This book highlights the sustainability aspects of textiles and clothing sector in light of nanomaterials and technologies. The invasion of nano in every industrial sector has been important and has made remarkable changes as well as posed new challenges, including the textiles and clothing sector. There is quite a great deal of research happening in terms of nano materials for textiles across the globe, some of which are covered in this book. .

  14. Bespoke Materials For Bespoke Textile Architecture

    DEFF Research Database (Denmark)

    Tamke, Martin; Baranovskaya, Yuliya; Holden Deleuran, Anders

    2016-01-01

    Membrane architecture uses currently off the shelf materials and produces the shapes and details through cutting and laborsome joining of textile patterns. This paper discusses investigations into an alternative material practice - knit - which engages bespoke membrane materials. A practice which...... how design and engineering practices change, when material properties move from given and constant into the area of design and gradient. Bespoke materials for bespoke textile architecture. Available from: https://www.researchgate.net/publication/306401612_Bespoke_materials_for_bespoke_textile...

  15. Treatment of effluent textiles with ultraviolet light

    OpenAIRE

    Tinoco Gómez, Oscar Rafael; UNMSM; Medina Escudero, Ana María; UNMSM; Zapata Gamarra, Hernán

    2014-01-01

    The use of clean technologies for the treatment of textile effluents is essential to achieve a significant contribution by the textile industry, environmental treatment of them. According to the literature, the dyes used in textile industry are hardly degradable and have strong opposition to biological treatments are subjected to appropriate wastewater. At lower concentrations of hydrogen peroxide (oxygenated water) leads to better dye fading. It also shows that lower concentrations of titani...

  16. The Textile Form of Sound

    DEFF Research Database (Denmark)

    Bendixen, Cecilie

    of sound. This issue is a part of a Ph.D. study at The Danish Design School in Copenhagen. Sound diffusion in architecture is a complex phenomenon. From the sound source the sound spreads in all directions as a sphere of wave fronts. When the sound is reflected from room boundaries or furniture, complex...... goemetry by analysing the sound pattern at a specific spot. This analysis is done theoretically with algorithmic systems and practical with waves in water. The paper describes the experiments and the findings, and explains how an analysis of sound can be catched in a textile form.......Sound is a part of architecture, and sound is complex. Upon this, sound is invisible. How is it then possible to design visual objects that interact with the sound? This paper addresses the problem of how to get access to the complexity of sound and how to make textile material revealing the form...

  17. [When textiles help your recovery].

    Science.gov (United States)

    Martel, Bernard; Campagne, Christine; Behary Massika, Nemeshwaree

    2017-01-01

    Textiles are widely used in the biomedical domain, particularly in wound dressings or as implantable devices for strengthening or even replacing some damaged organs. Nowadays they present more and more sophisticated functionalities contributing to the healing process, to the organs regeneration, and fight against infection or thrombosis. Advanced spinning technologies of biostable or bioresorbable polymers and surface treatment technologies are often used, as well as nanotechnologies, to implement two main strategies for development of bio-active textiles. A long or medium term technology is obtained by grafting the bio-active molecule through stable chemical bonds while a short term activity is produced by using "reservoir" systems such as hydrogels and cyclodextrins that release the active agents in situ. ‡. © 2017 médecine/sciences – Inserm.

  18. Aplicação de ciclodextrinas em processos têxteis Application of cyclodextrins in textile processes

    Directory of Open Access Journals (Sweden)

    Jürgen Andreaus

    2010-01-01

    Full Text Available Cyclodextrins (CDs are water soluble cyclic sugars with a hydrophobic nanometric cavity that permits the formation of host/guest inclusion complexes with a large variety of molecules, alternating their physical-chemical properties. In the present review CD research related to the processing of textiles is revised and discussed. CDs may function as encapsulating, dispersing and levelling agents in the dyeing and washing of textiles. Furthermore they may be anchored to polymers and textile fibers in order to impart special properties such as odor reduction, UV protection or for the controlled release of perfumes, aromas, mosquito repellents or substances with therapeutical effects.

  19. On-line inspection of textile geometries

    Science.gov (United States)

    Bahners, Thomas; Ringens, Werner; Schollmeyer, Eckhard

    1993-02-01

    Two examples of specific design philosophies for low-cost on-line inspection systems for textiles are described in this paper: The application of the moire-technique can heavily enhance the imaging of textile surfaces as a filter for the assessment of geometric variations of the textile `grating' with extremely simple algorithms for image analysis. Blinded for color shades triangulation sensors have been developed into powerful tools for fast profiling of textile surfaces. Curtailed for certain applications fiber optical modifications of the basic triangulation principle have been developed for aereal inspection.

  20. STAGE OF TEXTILE RECYCLE WASTE IN ROMANIA

    Directory of Open Access Journals (Sweden)

    TRIPA Simona

    2014-05-01

    Full Text Available Aim of this article is to examine the stage of textile recycle waste in Romania. For this purpose were analyzed the main sources of textile waste from Romania (industry of manufacture of textiles, wearing apparel, leather and related products, imports of textiles, clothing and footwear and imports of second hand clothing and also evolution of the quantity of textile waste in Romania. The benefits (economic and environmental of the collection and recycling of waste and the legislation on the waste management, have determined the diversification and increasing the number and the capacity of recovery and disposal of waste in Romania. We found the most textile waste in Romania was deposited in deposits onto or into land, in the proportion of 18.51%. This proportion is under the EU average of 34.03%, but is much higher than in other European country. Also, has been an increase in the number of incinerators, in the last years. With all of this, the interest in textile waste management in Romania is far from being to the level of European, where are associations who dealing with the collection and recycling of textiles and is achieved a selective collection of textile waste in the points especially designed for this thing. The information for this paper was gathered from literature, from the EUROSTAT database and INSSE database analysis and by Internet.

  1. Econazole imprinted textiles with antifungal activity.

    Science.gov (United States)

    Hossain, Mirza Akram; Lalloz, Augustine; Benhaddou, Aicha; Pagniez, Fabrice; Raymond, Martine; Le Pape, Patrice; Simard, Pierre; Théberge, Karine; Leblond, Jeanne

    2016-04-01

    In this work, we propose pharmaceutical textiles imprinted with lipid microparticles of Econazole nitrate (ECN) as a mean to improve patient compliance while maintaining drug activity. Lipid microparticles were prepared and characterized by laser diffraction (3.5±0.1 μm). Using an optimized screen-printing method, microparticles were deposited on textiles, as observed by scanning electron microscopy. The drug content of textiles (97±3 μg/cm(2)) was reproducible and stable up to 4 months storage at 25 °C/65% Relative Humidity. Imprinted textiles exhibited a thermosensitive behavior, as witnessed by a fusion temperature of 34.8 °C, which enabled a larger drug release at 32 °C (temperature of the skin) than at room temperature. In vitro antifungal activity of ECN textiles was compared to commercial 1% (wt/wt) ECN cream Pevaryl®. ECN textiles maintained their antifungal activity against a broad range of Candida species as well as major dermatophyte species. In vivo, ECN textiles also preserved the antifungal efficacy of ECN on cutaneous candidiasis infection in mice. Ex vivo percutaneous absorption studies demonstrated that ECN released from pharmaceutical textiles concentrated more in the upper skin layers, where the fungal infections develop, as compared to dermal absorption of Pevaryl®. Overall, these results showed that this technology is promising to develop pharmaceutical garments textiles for the treatment of superficial fungal infections. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. NANOTECHNOLOGY IN TEXTILE INDUSTRY [REVIEW

    Directory of Open Access Journals (Sweden)

    RATIU Mariana

    2015-05-01

    Full Text Available Nanoscience and nanotechnology are the study and application of extremely small things and can be used across all the other science fields, such as chemistry, biology, physics, materials science, and engineering. Nanotechnology overcomes the limitation of applying conventional methods to impart certain properties to textile materials. There is no doubt that in the next few years nanotechnology will penetrate into every area of the textile industry. Nanotextiles are nanoscale fibrous materials that can be fictionalized with a vast array of novel properties, including antibiotic activity, self-cleaning and the ability to increase reaction rates by providing large surface areas to potential reactants. These materials are used not only as cloth fabric, but as filter materials, wound-healing gauzes and antibacterial food packaging agents in food industry. World demand for nano-materials will rise more than two-and-a-half times to $5.5 billion in 2016 driven by a combination of increased market penetration of existing materials, and ongoing development of new materials and applications. In recent years was demonstrated that nanotechnology can be used to enhance textile attributes, such as fabric softness, durability and breathability, water repellency, fire retardancy, antimicrobial properties in fibers, yarns and fabrics. The development of smart nanotextiles has the potential to revolutionize the production of fibers, fabrics or nonwovens and functionality of our clothing and all types of textile products and applications. Nanotechnology is considered one of the most promising technologies for the 21st century. Today is said that if the IT is the wave of the present, the nanotechnology is the wave of the present, the nanotechnology is the wave of the future.

  3. Landscape Evolution Modelling of naturally dammed rivers

    NARCIS (Netherlands)

    van Gorp, Wouter; Temme, Arnaud J. A. M.; Baartman, Jantiene E. M.; Schoorl, Jeroen M.

    2014-01-01

    Natural damming of upland river systems, such as landslide or lava damming, occurs worldwide. Many dams fail shortly after their creation, while other dams are long-lived and therefore have a long-term impact on fluvial and landscape evolution. This long-term impact is still poorly understood and

  4. 7 CFR 1724.55 - Dam safety.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Dam safety. 1724.55 Section 1724.55 Agriculture... § 1724.55 Dam safety. (a) The provisions of this section apply only to RUS financed electric system... for Dam Safety,”(Guidelines), as applicable. A dam, as more fully defined in the Guidelines, is...

  5. The Study of the Electromagnetic Shielding Properties of a Textile Material with Amorphous Microwire

    Directory of Open Access Journals (Sweden)

    RAU, M.

    2011-02-01

    Full Text Available The paper presents the results concerning the utilization of a new class of composite textile materials with electromagnetic properties and the possibility of their utilization in the production of electromagnetic field protective equipment. The experimental and theoretical results concerning the electromagnetic characterization of a new textile material with composite structure are presented also considering the following aspects: - evaluation of the possibilities to use amorphous magnetic microwires in electromagnetic shielding; - study of the electromagnetic properties of the composite textile material, especially the electromagnetic field shielding, reflection and polarization; - determination of the frequency range within which these properties can be used in the realization of materials for the protection against electromagnetic fields. The experimental results of a material sample and a phantom for applications are connected with shielding in the frequency range used in mobile communications.

  6. Personal Exposure Between People in a Room Ventilated by Textile Terminals

    DEFF Research Database (Denmark)

    Nielsen, Peter V.; Hyldgård, Carl-Erik; Melikov, Arsen

    2007-01-01

    This paper describes an investigation made in a room ventilated by an air distribution system based on a textile terminal. The air distribution in the room is mainly controlled by buoyancy forces from the heat sources, although the flow from the textile terminal can be characterized...... as a displacement flow with a downward direction in areas of the room where no thermal load is present. The system was extended by a personalized ventilation system to study the improved protection of people in a room. The investigation involved full-scale experiments with two breathing thermal manikins. One...... manikin is the source and the other the target. In general it was found that when the air is supplied from the textile terminal alone, the flow in the room is fully mixed with limited protection of the occupants. Selected locations of supply, return, and heat sources can produce a displacement flow...

  7. Personal exposure between people in a room ventilated by textile terminals - with and without personalized ventilation

    DEFF Research Database (Denmark)

    Nielsen, P.V.; Hyldgaard, C.E.; Melikov, Arsen Krikor

    2007-01-01

    This paper describes an investigation made in a room ventilated by an air distribution system based on a textile terminal. The air distribution in the room is mainly controlled by buoyancy forces from the heat sources, although the flow from the textile terminal can be characterized...... as a displacement flow with a downward direction in areas of the room where no thermal load is present. The system was extended by a personalized ventilation system to study the improved Protection of people in a room. The investigation involved full-scale experiments with two breathing thermal manikins. One...... manikin is the source and the other the target. In general it was found that when the air is supplied from the textile terminal alone, the flow in the room is fully mixed with limited protection of the occupants. Selected locations of supply, return, and heat sources can produce a displacement flow...

  8. Big Lake Dam Inspection Report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report summarizes an inspection of the Big Lake Dam that was done in September of 1983. The inspection did not reveal any conditions that constitute and...

  9. Ririe Dam Release Test Assessment

    Science.gov (United States)

    2013-06-01

    Notes HEC - RAS Location Station (ft) Observation Notes 1420 Ririe Dam Ririe Dam 119,880 Gates opened and initial release started. 1455 115th St...16°F air temperature. Table A2. Observations made on 11 February 2013. Time Location Notes HEC - RAS Location Station (ft) Observation Notes...ERDC/CRREL TR-13-10 52 Time Location Notes HEC - RAS Location Station (ft) Observation Notes Travel Time* (sec) Vel.** (fps) 1224 5th

  10. A Study of Thermistor Performance within a Textile Structure

    Directory of Open Access Journals (Sweden)

    Theodore Hughes-Riley

    2017-08-01

    Full Text Available Textiles provide an ideal structure for embedding sensors for medical devices. Skin temperature measurement is one area in which a sensor textile could be particularly beneficial; pathological skin is normally very sensitive, making the comfort of anything placed on that skin paramount. Skin temperature is an important parameter to measure for a number of medical applications, including for the early detection of diabetic foot ulcer formation. To this end an electronic temperature-sensor yarn was developed by embedding a commercially available thermistor chip into the fibres of a yarn, which can be used to produce a textile or a garment. As part of this process a resin was used to encapsulate the thermistor. This protects the thermistor from mechanical and chemical stresses, and also allows the sensing yarn to be washed. Building off preliminary work, the behaviour and performance of an encapsulated thermistor has been characterised to determine the effect of encapsulation on the step response time and absolute temperature measurements. Over the temperature range of interest only a minimal effect was observed, with step response times varying between 0.01–0.35 s. A general solution is presented for the heat transfer coefficient compared to size of the micro-pod formed by the encapsulation of the thermistor. Finally, a prototype temperature-sensing sock was produced using a network of sensing yarns as a demonstrator of a system that could warn of impending ulcer formation in diabetic patients.

  11. A Study of Thermistor Performance within a Textile Structure.

    Science.gov (United States)

    Hughes-Riley, Theodore; Lugoda, Pasindu; Dias, Tilak; Trabi, Christophe L; Morris, Robert H

    2017-08-05

    Textiles provide an ideal structure for embedding sensors for medical devices. Skin temperature measurement is one area in which a sensor textile could be particularly beneficial; pathological skin is normally very sensitive, making the comfort of anything placed on that skin paramount. Skin temperature is an important parameter to measure for a number of medical applications, including for the early detection of diabetic foot ulcer formation. To this end an electronic temperature-sensor yarn was developed by embedding a commercially available thermistor chip into the fibres of a yarn, which can be used to produce a textile or a garment. As part of this process a resin was used to encapsulate the thermistor. This protects the thermistor from mechanical and chemical stresses, and also allows the sensing yarn to be washed. Building off preliminary work, the behaviour and performance of an encapsulated thermistor has been characterised to determine the effect of encapsulation on the step response time and absolute temperature measurements. Over the temperature range of interest only a minimal effect was observed, with step response times varying between 0.01-0.35 s. A general solution is presented for the heat transfer coefficient compared to size of the micro-pod formed by the encapsulation of the thermistor. Finally, a prototype temperature-sensing sock was produced using a network of sensing yarns as a demonstrator of a system that could warn of impending ulcer formation in diabetic patients.

  12. A Wearable All-Solid Photovoltaic Textile.

    Science.gov (United States)

    Zhang, Nannan; Chen, Jun; Huang, Yi; Guo, Wanwan; Yang, Jin; Du, Jun; Fan, Xing; Tao, Changyuan

    2016-01-13

    A solution is developed to power portable electronics in a wearable manner by fabricating an all-solid photovoltaic textile. In a similar way to plants absorbing solar energy for photosynthesis, humans can wear the as-fabricated photovoltaic textile to harness solar energy for powering small electronic devices. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Berg River Textiles - Cleaner Production Option Report

    DEFF Research Database (Denmark)

    Wenzel, Henrik; Schneider, Zsig

    In October and November 2002 meetings were held between Berg River Textiles, Mr. Juan Laubscher, and external consultants from the South African – Danish Cleaner Textile Production Project, Mr. Zsig Schneider and Mr. Henrik Wenzel. This team of people collected information on recipes and flow...

  14. Environmental Considerations for Flame Resistant Textiles

    Science.gov (United States)

    Virtually all common textiles will ignite and burn. There are mandatory and voluntary cigarette and open-flame ignition regulations to address unreasonable fire risks associated with textile products that require them to be treated with and/or contain flame retardant chemicals to make them flame res...

  15. Textiles and clothing sustainability sustainable technologies

    CERN Document Server

    2017-01-01

    This is the first book to deal with the innovative technologies in the field of textiles and clothing sustainability. It details a number of sustainable and innovative technologies and highlights their implications in the clothing sector. There are currently various measures to achieve sustainability in the textiles and the clothing industry, including innovations in the manufacturing stage, which is the crux of this book.

  16. New Research on Bronze Age Textile Production

    DEFF Research Database (Denmark)

    Andersson, Eva Birgitta; Mårtensson, Linda; Nosch, Marie-Louise Bech

    2008-01-01

    presentation of the results from the systematic tests with Bronze Age textile tools. results concerning mesurements of lenght and time consumed.......presentation of the results from the systematic tests with Bronze Age textile tools. results concerning mesurements of lenght and time consumed....

  17. The Organization of the Mycenaean Textile Industry

    DEFF Research Database (Denmark)

    Nosch, Marie-Louise Bech

    Analysis of thewritten documentation for the organiztion of the Mycenaean textile industri at Pylos, Knossos, Mycenae and Thebes......Analysis of thewritten documentation for the organiztion of the Mycenaean textile industri at Pylos, Knossos, Mycenae and Thebes...

  18. Tips for Teaching Textiles and Clothing.

    Science.gov (United States)

    New York State Education Dept., Albany. Bureau of Continuing Education Curriculum Development.

    This guide was prepared to help instructors of adult textiles and clothing programs improve their teaching; it is designed to be used with other department publications: Clothing Services Training Guide, Resource Courses for Planning Local Adult Homemaking Programs, and Resource Kit Tips for Teaching Textiles and Clothing (see AC 008 741). Each…

  19. Multi-Layer E-Textile Circuits

    Science.gov (United States)

    Dunne, Lucy E.; Bibeau, Kaila; Mulligan, Lucie; Frith, Ashton; Simon, Cory

    2012-01-01

    Stitched e-textile circuits facilitate wearable, flexible, comfortable wearable technology. However, while stitched methods of e-textile circuits are common, multi-layer circuit creation remains a challenge. Here, we present methods of stitched multi-layer circuit creation using accessible tools and techniques.

  20. Social Discounting of Large Dams with Climate Change Uncertainty

    Directory of Open Access Journals (Sweden)

    Marc Jeuland

    2010-06-01

    This paper reviews the recent discounting controversy and examines its implications for the appraisal of an illustrative hydropower project in Ethiopia. The analysis uses an integrated hydro-economic model that accounts for how the dam’s transboundary impacts vary with climate change. The real value of the dam is found to be highly sensitive to assumptions about future economic growth. The argument for investment is weakest under conditions of robust global economic growth, particularly if these coincide with unfavourable hydrological or development factors related to the project. If however long-term growth is reduced, the value of the dam tends to increase. There may also be distributional or local arguments favouring investment, if growth in the investment region lags behind that of the rest of the globe. In such circumstances, a large dam can be seen as a form of insurance that protects future vulnerable generations against the possibility of macroeconomic instability or climate shocks.

  1. Simulation of magnetic coatings on textile fibers

    Science.gov (United States)

    Blachowicz, T.; Ehrmann, A.

    2016-08-01

    While the properties of conductive fibres and coatings on textiles can easily be measured and calculated, magnetic coatings of fibres, yarns and fabrics still lack descriptions of their physical properties. Since magnetic textiles can be used for a variety of applications, from magnetic filters to invisible water-marks to magnetic coils and sensors, simulations would be supportive to understand and utilize their properties. The article gives an overview of different coatings on textile fibres, varying the magnetic materials as well as the fibre composition, giving rise to the interactions between neighbouring coated fibres. In this way, it is possible to understand the strong shape anisotropy which must be taken into account when the magnetic properties of textiles are to be tailored. Additionally, the differences between several possible magnetic coating materials become visible. This study can help adjusting the magnetic properties of textile fabrics to a desired application.

  2. Development of active porous medium filters based on plasma textiles

    Science.gov (United States)

    Kuznetsov, Ivan A.; Saveliev, Alexei V.; Rasipuram, Srinivasan; Kuznetsov, Andrey V.; Brown, Alan; Jasper, Warren

    2012-05-01

    Inexpensive, flexible, washable, and durable materials that serve as antimicrobial filters and self-decontaminating fabrics are needed to provide active protection to people in areas regularly exposed to various biohazards, such as hospitals and bio research labs working with pathogens. Airlines and cruise lines need such material to combat the spread of infections. In households these materials can be used in HVAC filters to fight indoor pollution, which is especially dangerous to people suffering from asthma. Efficient filtering materials are also required in areas contaminated by other types of hazardous dust particulates, such as nuclear dust. The primary idea that guided the undertaken study is that a microplasma-generating structure can be embedded in a textile fabric to generate a plasma sheath ("plasma shield") that kills bacterial agents coming in contact with the fabric. The research resulted in the development of a plasma textile that can be used for producing new types of self-decontaminating garments, fabrics, and filter materials, capable of activating a plasma sheath that would filter, capture, and destroy any bacteriological agent deposited on its surface. This new material relies on the unique antimicrobial and catalytic properties of cold (room temperature) plasma that is benign to people and does not cause thermal damage to many polymer textiles, such as Nomex and polypropylene. The uniqueness of cold plasma as a disinfecting agent lies in the inability of bacteria to develop resistance to plasma exposure, as they can for antibiotics. Plasma textiles could thus be utilized for microbial destruction in active antimicrobial filters (for continuous decontamination and disinfection of large amounts of air) as well as in self-decontaminating surfaces and antibacterial barriers (for example, for creating local antiseptic or sterile environments around wounds and burns).

  3. 16 CFR 1610.4 - Requirements for classifying textiles.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Requirements for classifying textiles. 1610... REGULATIONS STANDARD FOR THE FLAMMABILITY OF CLOTHING TEXTILES The Standard § 1610.4 Requirements for classifying textiles. (a) Class 1, Normal Flammability. Class 1 textiles exhibit normal flammability and are...

  4. 19 CFR 10.553 - Textile and apparel site visits.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Textile and apparel site visits. 10.553 Section 10... Trade Agreement Origin Verifications and Determinations § 10.553 Textile and apparel site visits. (a... Textile Agreements (CITA), exclude from the territory of the United States textile or apparel goods...

  5. Cost benefit of patch testing with textile finish resins

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner; Hamann, K

    1982-01-01

    Eleven years experience of textile finish resin patch testing of suspected textile dermatitis patients revealed 15 cases of allergic textile dermatitis among 428 patients tested. Ten of the 15 patients had a relevant positive patch test to one or more of a limited series of textile finishes; 1 wa...

  6. TEXTILE IMPACT PLATES FOR NANOPARTICLES

    OpenAIRE

    VISILEANU Emilia; Dumitrescu, Iuliana; Varzaru, Elena; MITRAN Cornelia; CHIRIAC Laura

    2017-01-01

    The paper presents textile materials with destination impact plates, having different surface architectures and active treatments for functionalization, with influence upon the aging process of nano-Ag and nano-CeO2. The woven and knitted samples from 100% cotton, cotton/PES blend and 100% PES were treated by impregnation on the laboratory padding machine, drying and condensing on the machine for drying-condensing-heat setting, with the following recipes: 50g/l RUCOSTAR EEE6+20 ml 5% nano-A...

  7. Functional textiles in hospital interiors

    DEFF Research Database (Denmark)

    Mogensen, Jeppe

    is overall related to the construction of new Danish hospitals, where the design concept healing architecture is introduced in a national context, representing the vision of a promoted healing process of hospitalised patients, supported by design related influence. Past research studies provides evidence...... that the physical environments affect the patients’ level of stress and influence their process of recovery and healing. However, although research in this field of hospital design has increased substantially in recent years, knowledge on the use of new materials and textiles in hospital interiors is still rather...

  8. Conflicts Associated with Dam Removal in Sweden

    Directory of Open Access Journals (Sweden)

    Anna G. C. Lejon

    2009-12-01

    Full Text Available The increasing number of deteriorating old dams that need renovation or have lost their function make dam removal a viable management option. There are at least four major reasons for dam removal: safety, law and policy, economy, and ecology. Here we discuss 17 Swedish dams that were recently considered for removal. Because dam removal usually causes controversy, dam removal initiatives may succeed, fail, or result in a compromise such as a bypass channel for migrating fish. We identify and discuss three major obstructions to dam removal: funding, cultural-historical values, and threatened species. To facilitate dam removal, the reasons for, and the effects of, dam removal must be carefully explained, and the public and stakeholders must be kept informed. In complicated cases in which compromise solutions may be the most feasible outcome, the integration of the knowledge of different stakeholders is crucial. The involvement of diverse stakeholders increases their willingness to find compromises, thus avoiding conflicts and failures.

  9. National Program for Inspection of Non-Federal Dams. Weston Reservoir Dam (MA 00798), Charles River Basin, Weston, Massachusetts. Phase I Inspection Report.

    Science.gov (United States)

    1980-02-01

    MASSACHUSETTS In’ In I- WESTON RESERVOIR DAM MA 00798 PHASE I INSPECTION REPORT NATIONAL DAM INSPECTION PROGRAM Copy avcailabl, to DTIC does nol Punk MIT...Vegetation on Slopes Heavy growth on d/s slope U/s slope mowed Sloughing or Erosion of Slopes or Abutments Slight undulations @d/s toe Rock Slope Protection...CONDITIONS OUTLET WORKS - SPILLWAY WEIR, APPROACH AND DISCHARGE CHANNELS a. Approach Channel Not Applicable General Condition Not Applicable Loose Rock

  10. Use of zinc oxide nano particles for production of antimicrobial textiles

    African Journals Online (AJOL)

    Recently, an awareness of general sanitation, contact disease transmission, and personal protection has led to the development of antimicrobial textiles. The development of antimicrobial cotton fabrics using Zinc oxide nanoparticles has been investigated in this present work. The ZnO nanoparticles were prepared by wet ...

  11. Investigating the mechanical behavior of composites made from textile industry waste

    NARCIS (Netherlands)

    Maqsood, Muhammad

    2017-01-01

    Recycling the waste for environmental protection has been an important challenge for the mankind. The fibrous waste in textile industry accounts for approximately 15% of the amount of fibers used, leading to a lower yield %. The current study focused to use this waste as reinforcement to produce a

  12. Efficiency and Import Penetrationon the Productivity of Textile Industry and Textile Products

    Directory of Open Access Journals (Sweden)

    Catur Basuki Rakhmawan

    2012-12-01

    Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the ave-rage level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

  13. Efficiency And Import Penetration On The Productivity Of Textile Industry And Textile Products

    Directory of Open Access Journals (Sweden)

    Catur B Rakhmawan, Djoni Hartono, Agni A Awirya

    2015-08-01

    Full Text Available Although textile industry and textile products belong to the strategic sub sector of manufacturing industry in Indonesia, they are facing pro-blems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the average level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.Keywords:Efficiency, Productivity, Import Penetration, DEA, Fixed Effect

  14. Efficiency and Import Penetration on the Productivity of Textile Industry and Textile Products

    Directory of Open Access Journals (Sweden)

    Catur Basuki Rakhmawan

    2012-12-01

    Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the average level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

  15. Textile Messages: Dispatches from the World of E-Textiles and Education. New Literacies and Digital Epistemologies. Volume 62

    Science.gov (United States)

    Buechley, Leah, Ed.; Peppler, Kylie, Ed.; Eisenberg, Michael, Ed.; Yasmin, Kafai, Ed.

    2013-01-01

    "Textile Messages" focuses on the emerging field of electronic textiles, or e-textiles--computers that can be soft, colorful, approachable, and beautiful. E-textiles are articles of clothing, home furnishings, or architectures that include embedded computational and electronic elements. This book introduces a collection of tools that…

  16. Amazon dams and waterways: Brazil's Tapajós Basin plans.

    Science.gov (United States)

    Fearnside, Philip M

    2015-09-01

    Brazil plans to build 43 "large" dams (>30 MW) in the Tapajós Basin, ten of which are priorities for completion by 2022. Impacts include flooding indigenous lands and conservation units. The Tapajós River and two tributaries (the Juruena and Teles Pires Rivers) are also the focus of plans for waterways to transport soybeans from Mato Grosso to ports on the Amazon River. Dams would allow barges to pass rapids and waterfalls. The waterway plans require dams in a continuous chain, including the Chacorão Dam that would flood 18,700 ha of the Munduruku Indigenous Land. Protections in Brazil's constitution and legislation and in international conventions are easily neutralized through application of "security suspensions," as has already occurred during licensing of several dams currently under construction in the Tapajós Basin. Few are aware of "security suspensions," resulting in little impetus to change these laws.

  17. Damming the rivers of the Amazon basin

    Science.gov (United States)

    Latrubesse, Edgardo M.; Arima, Eugenio Y.; Dunne, Thomas; Park, Edward; Baker, Victor R.; D'Horta, Fernando M.; Wight, Charles; Wittmann, Florian; Zuanon, Jansen; Baker, Paul A.; Ribas, Camila C.; Norgaard, Richard B.; Filizola, Naziano; Ansar, Atif; Flyvbjerg, Bent; Stevaux, Jose C.

    2017-06-01

    More than a hundred hydropower dams have already been built in the Amazon basin and numerous proposals for further dam constructions are under consideration. The accumulated negative environmental effects of existing dams and proposed dams, if constructed, will trigger massive hydrophysical and biotic disturbances that will affect the Amazon basin’s floodplains, estuary and sediment plume. We introduce a Dam Environmental Vulnerability Index to quantify the current and potential impacts of dams in the basin. The scale of foreseeable environmental degradation indicates the need for collective action among nations and states to avoid cumulative, far-reaching impacts. We suggest institutional innovations to assess and avoid the likely impoverishment of Amazon rivers.

  18. Encapsulation for smart textile electronics - humidity and temperature sensor.

    Science.gov (United States)

    Larsson, Andreas; Tran, Thanh-Nam; Aasmundtveit, Knut E; Seeberg, Trine M

    2015-01-01

    A combined humidity and temperature sensor was packaged by vacuum casting onto three different types of textiles; cotton, nylon and a waterproof fabric. This was done in order to integrate the sensor in a jacket in a soft and reliable way without changing the sensor performance. A membrane was custom made and integrated into the device to protect the sensor from the environment. The packaged sensors performance was characterized in a climate chamber were the relative humidity and temperature ranged from 25 % to 95 % and -10 °C to 75 °C respectively. The packaged sensors showed insignificant to limited performance degradation.

  19. Printing of organic light emitting diodes on textile

    OpenAIRE

    Verboven, Inge; Gilissen, Koen; Vandevenne, Glen; Troia, Mariagrazia; Leins, Martina; Walker, Matthias; Schulz, Andreas; Deferme, Wim

    2015-01-01

    Smart textiles with light-emitting properties open a whole new world of innovative textile applications such as indoor and outdoor design and safety clothing. To achieve light-emitting properties on textiles, organic light emitting diodes are printed or integrated onto textile substrates. The advantage of this approach is that typical textile properties like flexibility and drapabilty are maintained. The authors would like to thank the research and funding partners of the European CORNET p...

  20. Stretchable, Porous, and Conductive Energy Textiles

    KAUST Repository

    Hu, Liangbing

    2010-02-10

    Recently there is strong interest in lightweight, flexible, and wearable electronics to meet the technological demands of modern society. Integrated energy storage devices of this type are a key area that is still significantly underdeveloped. Here, we describe wearable power devices using everyday textiles as the platform. With an extremely simple "dipping and drying" process using single-walled carbon nanotube (SWNT) ink, we produced highly conductive textiles with conductivity of 125 S cm-1 and sheet resistance less than 1 Ω/sq. Such conductive textiles show outstanding flexibility and stretchability and demonstrate strong adhesion between the SWNTs and the textiles of interest. Supercapacitors made from these conductive textiles show high areal capacitance, up to 0.48F/cm2, and high specific energy. We demonstrate the loading of pseudocapacitor materials into these conductive textiles that leads to a 24-fold increase of the areal capacitance of the device. These highly conductive textiles can provide new design opportunities for wearable electronics and energy storage applications. © 2010 American Chemical Society.

  1. Stretchable, porous, and conductive energy textiles.

    Science.gov (United States)

    Hu, Liangbing; Pasta, Mauro; Mantia, Fabio La; Cui, Lifeng; Jeong, Sangmoo; Deshazer, Heather Dawn; Choi, Jang Wook; Han, Seung Min; Cui, Yi

    2010-02-10

    Recently there is strong interest in lightweight, flexible, and wearable electronics to meet the technological demands of modern society. Integrated energy storage devices of this type are a key area that is still significantly underdeveloped. Here, we describe wearable power devices using everyday textiles as the platform. With an extremely simple "dipping and drying" process using single-walled carbon nanotube (SWNT) ink, we produced highly conductive textiles with conductivity of 125 S cm(-1) and sheet resistance less than 1 Omega/sq. Such conductive textiles show outstanding flexibility and stretchability and demonstrate strong adhesion between the SWNTs and the textiles of interest. Supercapacitors made from these conductive textiles show high areal capacitance, up to 0.48F/cm(2), and high specific energy. We demonstrate the loading of pseudocapacitor materials into these conductive textiles that leads to a 24-fold increase of the areal capacitance of the device. These highly conductive textiles can provide new design opportunities for wearable electronics and energy storage applications.

  2. Mechanical Properties Of Traditional And Nanofibre Textiles

    Directory of Open Access Journals (Sweden)

    Ursíny Petr

    2015-09-01

    Full Text Available This study deals with a comparison of mechanical properties of a conventional yarn and a textile from nanofibres. The conventional yarn represents the textile objects with high degree of orientation of fibres and the textile from nanofibres represents the textile objects with low degree of orientation of fibres. The theoretical section is concerned with the issue of internal structure of plied yarn and resulting differences in the orientation and straightening of fibres and in utilisation of deformation properties of fibres in comparison to the referred nano textile. The experimental section describes the manner of realisation of both static and dynamic tests of conventional yarn and strips of nanofibres. The results show differences in the mechanical properties of conventional yarn and textile strip from nanofibres under static and dynamic loading conditions. The processing technology of conventional yarn has been verified in the long term. But textiles from nanofibres are a relatively new material and mechanical properties of the detected differences point out possible problems with their behaviour during standard technological processes.

  3. Organofunctional Trialkoxysilane Sol-Gel Precursors for Chemical Modi! cation of Textile Fibres

    Directory of Open Access Journals (Sweden)

    Jelena Vasiljević

    2017-07-01

    Full Text Available This paper reviews the use of organofunctional trialkoxysilane sol-gel precursors as contemporary fi nishing agents for the chemical modification of textile fires. The structures of organofunctional trialkoxysilanes are presented and compared to those of other silicon-based organic-inorganic hybrid materials. We describe the steps in the application procedure and the polysilsesquioxane coating fabrication on the surface of textile fibres. The functionalities, e.g., water and oil repellency, flame retardancy, antimicrobial properties, electrical conductivity and anti-static properties, are discussed in relation to the chemical structures of the precursor organic moiety, mechanisms and principals of the coating activity and its washing fastness. The most important published scientific results on organofunctional trialkoxysilanes applications to the surface of textile fibres are discussed with an emphasis on the creation of a multicomponent coating with multifunctional protective properties.

  4. Performance Study of Screen-Printed Textile Antennas after Repeated Washing

    Directory of Open Access Journals (Sweden)

    Kazani I.

    2014-06-01

    Full Text Available The stability of wearable textile antennas after 20 reference washing cycles was evaluated by measuring the reflection coefficient of different antenna prototypes. The prototypes’ conductive parts were screen-printed on several textile substrates using two different silver-based conductive inks. The necessity of coating the antennas with a thermoplastic polyurethane (TPU coating was investigated by comparing coated with uncoated antennas. It is shown that covering the antennas with the TPU layer not only protects the screen-printed conductive area but also prevents delamination of the multilayered textile fabric substrates, making the antennas washable for up to 20 cycles. Furthermore, it is proven that coating is not necessary for maintaining antenna operation and this up to 20 washing cycles. However, connector detachment caused by friction during the washing process was the main problem of antenna performance degradation. Hence, other flexible, durable methods should be developed for establishing a stable electrical connection.

  5. Three Gorges Dam, China

    Science.gov (United States)

    2002-01-01

    This ASTER image shows a 60 km stretch of the Yangtze River in China, including the Xiling Gorge, the eastern of the three gorges. In the left part of the image is the construction site of the Three Gorges Dam, the world's largest.This image was acquired on July 20, 2000 by the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) on NASA's Terra satellite. With its 14 spectral bands from the visible to the thermal infrared wavelength region, and its high spatial resolution of 15 to 90 meters (about 50 to 300 feet), ASTER will image Earth for the next 6 years to map and monitor the changing surface of our planet.ASTER is one of five Earth-observing instruments launched December 18, 1999, on NASA's Terra satellite. The instrument was built by Japan's Ministry of Economy, Trade and Industry. A joint U.S./Japan science team is responsible for validation and calibration of the instrument and the data products. Dr. Anne Kahle at NASA's Jet Propulsion Laboratory, Pasadena, California, is the U.S. Science team leader; Bjorn Eng of JPL is the project manager. The Terra mission is part of NASA's Earth Science Enterprise, a long-term research and technology program designed to examine Earth's land, oceans, atmosphere, ice and life as a total integrated system.The broad spectral coverage and high spectral resolution of ASTER will provide scientists in numerous disciplines with critical information for surface mapping, and monitoring dynamic conditions and temporal change. Example applications are: monitoring glacial advances and retreats; monitoring potentially active volcanoes; identifying crop stress; determining cloud morphology and physical properties; wetlands evaluation; thermal pollution monitoring; coral reef degradation; surface temperature mapping of soils and geology; and measuring surface heat balance.Size: 60 x 24 km (36 x 15 miles) Location: 30.6 deg. North lat., 111.2 deg. East long. Orientation: North at top Image Data: ASTER bands 1,2, and 3

  6. Textile effluent & waste water: a review

    OpenAIRE

    Mojsov, Kiro

    2013-01-01

    Textile processing is a growing industry that traditionally has used a lot of water, energy and harsh chemicals. Textile industries consume over 7 x 105tons of dyes annually and use up to 1 litre of water per kg of dye processed and arethird largest polluters in the world. As a characteristic of the textile processing industry, a wide range of structurally diverse dyes can be used in a single factory, and therefore effluents from the industry are extremely variable in composition. This needed...

  7. Anti-UV Radiation Textiles Designed by Embracing with Nano-MIL (Ti, In)-Metal Organic Framework.

    Science.gov (United States)

    Emam, Hossam E; Abdelhameed, Reda M

    2017-08-23

    Protective textiles against harmful solar radiation are quite important materials for outdoor workers to secure their skin from several diseases. Current report focuses on production of anti-ultraviolet radiation (UVR) textiles by incorporation of nano-metal-organic frameworks (n-MOFs). Two different MIL-MOFs, namely, MIL-68(In)-NH2 and MIL-125(Ti)-NH2, were immediately formed inside natural textiles (cotton and silk) matrix in nano size using quite simple and one-pot process. The formation of n-MIL-MOFs inside textiles were confirmed by using electron microscope and X-ray diffraction. Different size and morphology were seen depending on textile type reflecting the textiles' chemical composition role in the nature of prepared MIL-MOFs. For MIL-68(In)-NH2, particles with size distribution of 70.6-44.5 nm in cotton and 81.3-52.2 nm in silk were detected, while crystalline disc of MIL-125(Ti)-NH2 was clearly seen inside textiles. The natural textiles exhibited full UVR blocking after modification, and the UV protection factor (UPF) was linearly proportional with MIL-MOFs and metal contents. Whatever metal type, direct incorporation of MIL-MOF contents greater than or equal to 10.4 g/kg was sufficient to attain excellent UV blocking property. Although 38.5-41.0% of MIL-MOFs was lost during five washings, the washed samples showed very good blocking rate (UPF = 26.7-36.2) supporting good laundering durability.

  8. Textile materials for electromagnetic field shielding made with the use of nano- and micro-technology

    Science.gov (United States)

    Brzeziński, Stefan; Rybicki, Tomasz; Karbownik, Iwona; Malinowska, Grażyna; Śledzińska, Katarzyna

    2012-10-01

    Studies have been carried out aimed at the development of structures and technology for making special multi-layer textile-polymeric systems of shielding electromagnetic field (EMF). The use of textiles as EMF shielding materials is commonly known, however the EMF attenuation obtained practically exclusively results from the reflection of EMF, while the materials used for this purpose as a rule, show poor EMF absorption abilities. The basic assumption for a new solution is the exploitation of the multiple internal reflection of incident EMF either in textile-polymeric coating materials containing fine-particle electromagnetic materials or in special textile structures. This paper presents the results of investigating the EMF shielding effectiveness of several selected and developed textile-polymeric materials in respect of both their practical applications (protective clothing elements, technical materials, masking elements, etc.) and the structure and content of components with various EMF reflection and absorption properties. The measurement method for independent determination of reflection and transmission coefficients with a wavequide applicator was used. The results obtained with the 2.5 GHz to 18 GHz frequency range show a low value of transmission coefficient (min. -35 dB) and accepted reflection attenuation from about -4 dB to -15 dB for higher frequencies.

  9. Distribution and accumulation of heavy metals in the sediments of Akkaya Dam, Nigde, Turkey.

    Science.gov (United States)

    Keskin, Şeref

    2012-01-01

    Twenty-one surface sediment samples were collected from Akkaya Dam. Heavy metal concentrations (Mo, Cu, Pb, Zn, Ni, Co, Mn, Fe, Cr, As, V and Cd), grain size, organic carbon and carbonate contents were studied in order to assess the extent of environmental pollution and to discuss the origin of these contaminants in sediments of dam. The sediments in the study area are mostly very fine sands. However, mud was observed in the northeast of the dam. Sediment pollution assessment was carried out using enrichment factor. The calculation of enrichment factors showed that Mo is depleted by 1.0 whereas Cu, Pb, Zn, Ni, Co, Mn, As, V, Cr and Cd are enriched by 3, 5.4, 7, 2.7, 2.2, 3.4, 42.3, 2.1, 1.8 and 7.2, respectively. Relatively high concentrations heavy metals occurred in north (textile industry area) and east (Karasu River) due to enrichment controlled by anthropogenic wastes. The results of correlation analysis show low-medium positive and negative correlations among metals, grain size, carbonate contents and organic carbon and indicate that heavy metals in sediments of the Akkaya Dam have different anthropogenic sources.

  10. Textiles in dermatology: our experience and literature review.

    Science.gov (United States)

    Brambilla, Lucia; Brena, Michela; Tourlaki, Athanasia

    2016-06-01

    Skin protects its host from its environment and allows their interactions by providing a physical permeability barrier, protection from infectious agents, thermoregulation, and ultraviolet protection. Textiles, in particular clothing, interact with skin functions in a dynamic pattern. For years cotton has been considered as the only comfortable tissue suitable for patients with dermatologic disorders. Nowadays new synthetic fibers with important functions, for example breathability and waterproofing have leaned out and new tissues can be used as a complementary tool in dermatologic treatments. Our purpose is to report the main fibers used for dermatological problems and to review the literature on their use in dermatological field; finally, we also report our personal experience on this topic.

  11. A pre-dam-removal assessment of sediment transport for four dams on the Kalamazoo River between Plainwell and Allegan, Michigan

    Science.gov (United States)

    Syed, Atiq U.; Bennett, James P.; Rachol, Cynthia M.

    2005-01-01

    Four dams on the Kalamazoo River between the cities of Plainwell and Allegan, Mich., are in varying states of disrepair. The Michigan Department of Environmental Quality (MDEQ) and U.S. Environmental Protection Agency (USEPA) are considering removing these dams to restore the river channels to pre-dam conditions. This study was initiated to identify sediment characteristics, monitor sediment transport, and predict sediment resuspension and deposition under varying hydraulic conditions. The mathematical model SEDMOD was used to simulate streamflow and sediment transport using three modeling scenarios: (1) sediment transport simulations for 730 days (Jan. 2001 to Dec. 2002), with existing dam structures, (2) sediment transport simulations based on flows from the 1947 flood at the Kalamazoo River with existing dam structures, and (3) sediment transport simulations based on flows from the 1947 flood at the Kalamazoo River with dams removed. Sediment transport simulations based on the 1947 flood hydrograph provide an estimate of sediment transport rates under maximum flow conditions. These scenarios can be used as an assessment of the sediment load that may erode from the study reach at this flow magnitude during a dam failure. The model was calibrated using suspended sediment as a calibration parameter and root mean squared error (RMSE) as an objective function. Analyses of the calibrated model show a slight bias in the model results at flows higher than 75 m3/s; this means that the model-simulated suspended-sediment transport rates are higher than the observed rates; however, the overall calibrated model results show close agreement between simulated and measured values of suspended sediment. Simulation results show that the Kalamazoo River sediment transport mechanism is in a dynamic equilibrium state. Model results during the 730-day simulations indicate significant sediment erosion from the study reach at flow rates higher than 55 m3/s. Similarly, significant

  12. Viewpoint – Brazil’s Madeira River Dams: A Setback for Environmental Policy in Amazonian Development

    Directory of Open Access Journals (Sweden)

    Philip Martin Fearnside

    2014-02-01

    Full Text Available Decisions on hydroelectric dam construction will be critical in shaping the future of Amazonia, where planned dams would convert most tributaries into chains of reservoirs. The Santo Antônio and Jirau dams, now nearing completion on the Madeira River, have created dangerous precedents in a trend towards weakening environmental protection in Brazil. Political appointees have overruled the technical staff of the Brazilian Institute for the Environment and Renewable Natural Resources (IBAMA, which is responsible for evaluating the environmental impact study (EIA and for licensing dams. Installation licences were granted without satisfying many of the 'conditions' that had been established as prerequisites. This feature and several others of the licensing process for the Madeira River dams have now been repeated in licensing the controversial Belo Monte Dam on the Xingu River. Brazil plans to build 30 large dams in its Amazon region in a decade, and others are to be financed and built by Brazil in Peru, Bolivia, Ecuador and Guyana. These plans affect virtually all water resources in an area larger than Western Europe. The Madeira River dams indicate the need to reform the decision-making process in Brazil.

  13. Douglas County Dam Breach Inundation Areas

    Data.gov (United States)

    Kansas Data Access and Support Center — Dam breach analysis provides a prediction of the extent and timing of flooding from a catastrophic breach of the dams. These results are sufficient for developing...

  14. Effects of Suburban Development on Dam Safety: Who is Responsible for Spillway Upgrades?

    Science.gov (United States)

    Orlins, J. J.

    2002-05-01

    Land use patterns in many parts of the eastern United States have changed from rural to suburban or urban developments over the last few decades. The effects of urbanization on hydrologic processes are generally well understood: as development (and thus impervious surface area) increases, peak stream flows increase in magnitude and frequency. These changes in watershed hydrology can adversely affect stream morphology, water quality, and aquatic ecosystems. In addition to these factors, public safety may be endangered, with respect to hydraulic capacity of existing dams. In southern New Jersey, there are numerous small dams. Many of these were constructed in the early part of the 20th Century, to provide power for local mills. Today, the mills are long gone, but the dams remain. Current uses of the lakes created by these dams range from recreation to fire protection. When the dams were originally designed and built, they were adequate for the hydrologic conditions of the day. However, as development has changed the landscape in the watersheds upstream of these dams, existing spillways in many cases can no longer handle peak flows. These problems are compounded by revised estimates of Probable Maximum Precipitation, and thus Probable Maximum Flows. Current State regulations stipulate that all dams must be inspected on a regular basis, and must be able to pass current design flows. If existing spillways are undersized for the current hydrologic conditions, they must be upgraded, or the dams must be removed. Government and corporate dam owners can generally finance dam repairs and upgrades in a timely fashion. However, private dam owners often face financial challenges when faced with upgrading an existing dam to meet current hydrologic conditions In most cases, the dam owners have little or no control over land use in the watersheds. Thus, owners are faced with costly upgrades, which are required by conditions they can not control. This paper will explore the issue of

  15. 76 FR 79166 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

    Science.gov (United States)

    2011-12-21

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability...'') AGENCY: The Committee for the Implementation of Textile Agreements ACTION: Determination to add a product... 21, 2011. SUMMARY: The Committee for the Implementation of Textile Agreements (``CITA'') has...

  16. 76 FR 78249 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

    Science.gov (United States)

    2011-12-16

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability...'') AGENCY: The Committee for the Implementation of Textile Agreements. ACTION: Determination to add a...: December 16, 2011. SUMMARY: The Committee for the Implementation of Textile Agreements (``CITA'') has...

  17. 75 FR 75664 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

    Science.gov (United States)

    2010-12-06

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability...'') AGENCY: The Committee for the Implementation of Textile Agreements. ACTION: Determination to add a...: December 6, 2010. SUMMARY: The Committee for the Implementation of Textile Agreements (``CITA'') has...

  18. 76 FR 16734 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

    Science.gov (United States)

    2011-03-25

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability...'') AGENCY: The Committee for the Implementation of Textile Agreements. ACTION: Determination to add a... Publication. SUMMARY: The Committee for the Implementation of Textile Agreements (``CITA'') has determined...

  19. 78 FR 16662 - Determination Under the Textile and Apparel Commercial Availability Provision of the United...

    Science.gov (United States)

    2013-03-18

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability... Committee for the Implementation of Textile Agreements. ACTION: Determination to add a product in...: The Committee for the Implementation of Textile Agreements (``CITA'') has determined that certain...

  20. 78 FR 39713 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

    Science.gov (United States)

    2013-07-02

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability...'') AGENCY: The Committee for the Implementation of Textile Agreements. ACTION: Determination to add a..., 2013. SUMMARY: The Committee for the Implementation of Textile Agreements (``CITA'') has determined...

  1. 77 FR 8221 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

    Science.gov (United States)

    2012-02-14

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability...'') AGENCY: The Committee for the Implementation of Textile Agreements. ACTION: Determination to add a...: February 14, 2012. SUMMARY: The Committee for the Implementation of Textile Agreements (``CITA'') has...

  2. 75 FR 65609 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

    Science.gov (United States)

    2010-10-26

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability...'') AGENCY: The Committee for the Implementation of Textile Agreements. ACTION: Determination to add a... 26, 2010. SUMMARY: The Committee for the Implementation of Textile Agreements (``CITA'') has...

  3. 78 FR 7414 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

    Science.gov (United States)

    2013-02-01

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability...'') AGENCY: The Committee for the Implementation of Textile Agreements. ACTION: Determination to add a...: February 1, 2013. SUMMARY: The Committee for the Implementation of Textile Agreements (``CITA'') has...

  4. 75 FR 48931 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

    Science.gov (United States)

    2010-08-12

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability...'') August 9, 2010. AGENCY: The Committee for the Implementation of Textile Agreements. ACTION: Determination... Date: August 12, 2010. SUMMARY: The Committee for the Implementation of Textile Agreements (``CITA...

  5. 78 FR 17642 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

    Science.gov (United States)

    2013-03-22

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability...'') AGENCY: The Committee for the Implementation of Textile Agreements. ACTION: Determination to add a... 22, 2013. SUMMARY: The Committee for the Implementation of Textile Agreements (``CITA'') has...

  6. 76 FR 52640 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

    Science.gov (United States)

    2011-08-23

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability...'') AGENCY: The Committee for the Implementation of Textile Agreements. ACTION: Determination to remove a.... SUMMARY: The Committee for the Implementation of Textile Agreements (``CITA'') has determined that an...

  7. 78 FR 18561 - Determination Under the Textile and Apparel Commercial Availability Provision of the United...

    Science.gov (United States)

    2013-03-27

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability... Committee for the Implementation of Textile Agreements. ACTION: Determination to add a product in...: The Committee for the Implementation of Textile Agreements (``CITA'') has determined that certain...

  8. 76 FR 67424 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

    Science.gov (United States)

    2011-11-01

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability...'') AGENCY: The Committee for the Implementation of Textile Agreements. ACTION: Determination to add a...: November 1, 2011. SUMMARY: The Committee for the Implementation of Textile Agreements (``CITA'') has...

  9. 78 FR 16661 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

    Science.gov (United States)

    2013-03-18

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability...'') AGENCY: The Committee for the Implementation of Textile Agreements. ACTION: Determination to add a... 18, 2013. SUMMARY: The Committee for the Implementation of Textile Agreements (``CITA'') has...

  10. Wildlife Mitigation and Restoration for Grand Coulee Dam: Blue Creek Project, Phase 1.

    Energy Technology Data Exchange (ETDEWEB)

    Merker, Christopher

    1993-04-01

    This report is a recommendation from the Spokane Tribe to the Northwest Power Planning Council (NPPC) for partial mitigation for the extensive wildlife and wildlife habitat losses on the Spokane Indian Reservation caused by the construction of Grand Coulee Dam. NPPC`s interim wildlife goal over the next 7 years for the Columbia hydropower system, is to protect, mitigate and enhance approximately 35% basin wide of the lost habitat units. Grand Coulee Dam had the greatest habitat losses of any Dams of the Wildlife Rule.

  11. Textile materials for lightweight constructions technologies, methods, materials, properties

    CERN Document Server

    2016-01-01

    In this book, experts on textile technologies convey both general and specific informa­tion on various aspects of textile engineering, ready-made technologies, and textile chemistry. They describe the entire process chain from fiber materials to various yarn constructions, 2D and 3D textile constructions, preforms, and interface layer design. In addition, the authors introduce testing methods, shaping and simulation techniques for the characterization of and structural mechanics calculations on anisotropic, pliable high-performance textiles, including specific examples from the fields of fiber plastic composites, textile concrete, and textile membranes. Readers will also be familiarized with the potential offered by increasingly popular textile structures, for instance in the fields of composite technology, construction technology, security technology, and membrane technology. Textile materials and semi-finished products have widely varied potential characteristics, and are commonly used as essential element...

  12. Dermatotoxicologic clinical solutions: textile dye dermatitis patch testing.

    Science.gov (United States)

    Coman, Garrett; Blickenstaff, Nicholas; Edwards, Ashley; Maibach, Howard

    2015-03-01

    The authors provide a framework for working up and counseling a patient with suspected textile dermatitis, focusing on identifying which textile materials are most likely to be the cause of the eczematous lesions, the current clinical guidelines, the utility and appropriateness of patch testing, the limitations of these guidelines, and our pro tempore recommendations. While there are many challenges to correctly identify and counsel patients on how to avoid the offending textile products in a patient with suspected textile dye dermatitis, there is value in following the guidelines set forth to help identify the causative textile(s). Although patch tests can be useful, dermatologists should understand the limitations of standardized patch testing for patients with suspected textile dye-induced dermatitis. These guidelines are expected to increase the likelihood of identifying the causative textile(s), so that patch testing can be supplemented with swatch testing and chemical dye extraction to help discover the allergenic dye.

  13. Nettle as a distinct Bronze Age textile plant.

    Science.gov (United States)

    Bergfjord, C; Mannering, U; Frei, K M; Gleba, M; Scharff, A B; Skals, I; Heinemeier, J; Nosch, M-L; Holst, B

    2012-01-01

    It is generally assumed that the production of plant fibre textiles in ancient Europe, especially woven textiles for clothing, was closely linked to the development of agriculture through the use of cultivated textile plants (flax, hemp). Here we present a new investigation of the 2800 year old Lusehøj Bronze Age Textile from Voldtofte, Denmark, which challenges this assumption. We show that the textile is made of imported nettle, most probably from the Kärnten-Steiermark region, an area which at the time had an otherwise established flax production. Our results thus suggest that the production of woven plant fibre textiles in Bronze Age Europe was based not only on cultivated textile plants but also on the targeted exploitation of wild plants. The Lusehøj find points to a hitherto unrecognized role of nettle as an important textile plant and suggests the need for a re-evaluation of textile production resource management in prehistoric Europe.

  14. Dams life; La vie des barrages

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The paper reports on the conclusions of decennial and annual inspections of French dams. Dams surveillance is performed by the operators and consists in visual examinations and measurements. Concrete dams, in particular, always have more or less developed fissures with water sweating threw the concrete mass or the foundations. Old concrete often show low swelling phenomena which are measured too. (J.S.)

  15. Thin fiber and textile reinforced cementitious systems

    National Research Council Canada - National Science Library

    Aldea, Corina-Maria

    2007-01-01

    This Special Publication (SP) contains ten papers which provide insight on the topics of state of the art of thin fiber and textile-reinforced cementitious systems both in academia and the industry...

  16. Nanomaterials for Functional Textiles and Fibers

    National Research Council Canada - National Science Library

    Rivero, Pedro J; Urrutia, Aitor; Goicoechea, Javier; Arregui, Francisco J

    2015-01-01

    ... macroscopic properties. This article reviews the most relevant approaches for incorporating such nanoparticles into synthetic fibers used traditionally in the textile industry allowing to give a solution to traditional...

  17. Wearable Electro-Textiles for Battlefield Awareness

    National Research Council Canada - National Science Library

    Winterhalter, C. A; Teverovsky, Justyna; Horowitz, Wendy; Sharma, Vikram; Lee, Kang

    2004-01-01

    This summary describes efforts to develop wearable electronic textiles and connectors to support body worn networking, communications, and battlefield awareness for future service members of the U.S. Army...

  18. ROMANIAN TEXTILE INDUSTRY AND ITS COMPETITIVE ADVANTAGE

    Directory of Open Access Journals (Sweden)

    Cristiana Ioana ŞERBĂNEL

    2014-06-01

    Full Text Available Globalization has set up a new era of international trade flows and implicitly international competition. This is best understood by analyzing the rise and fall within certain industries. The Global Value Chains (GVC framework has emerged from its theoretical origins to become a major paradigm used by several international organizations. A detailed scrutiny of GVC highlightsthe manner in which new patterns of production, international trade and employment shape prospects for development and competitiveness.The purpose of the article is to address the important role of the textile sector in national economy development. Firstly, the paper addresses the presentation of textile industry at global, European and national level. Then, it presents a competitiveness sectorial approach and the analysis of innovation in textile industry.Finally, it is presented the value chain for the textile industry in Romania.

  19. Textile composites based on natural fibers

    CSIR Research Space (South Africa)

    Li, Yan

    2009-04-01

    Full Text Available composites based on natural fibers are investigated, which includes the manufacuring techniques, fracture and mechanical properties and other behaviours. Consolidation and permeability of the textiles based on natural fibers are specially addressed...

  20. Allergic Contact Dermatitis Induced by Textile Necklace

    Directory of Open Access Journals (Sweden)

    Uffe Nygaard

    2013-11-01

    Full Text Available Allergic contact dermatitis to textile dyes is considered to be a rare phenomenon. A recent review reported a prevalence of contact allergy to disperse dyes between 0.4 and 6.7%. The relevance of positive patch testing was not reported in all studies. Textile dye allergy is easily overlooked and is furthermore challenging to investigate as textile dyes are not labelled on clothing. In this report, we present a case of allergic contact dermatitis to a textile necklace. The patch test showed strong reactions to the necklace and the azo dyes Disperse Orange 1 and Disperse Yellow 3. Despite the European legislation and the reduced use of disperse dyes in Third World countries, disperse azo dyes still induce new cases of allergic contact dermatitis.

  1. Green piezoelectric for autonomous smart textile

    Science.gov (United States)

    Lemaire, E.; Borsa, C. J.; Briand, D.

    2015-12-01

    In this work, the fabrication of Rochelle salt based piezoelectric textiles are shown. Structures composed of fibers and Rochelle salt are easily produced using green processes. Both manufacturing and the material itself are really efficient in terms of environmental impact, considering the fabrication processes and the material resources involved. Additionally Rochelle salt is biocompatible. In this green paradigm, active sensing or actuating textiles are developed. Thus processing method and piezoelectric properties have been studied: (1) pure crystals are used as acoustic actuator, (2) fabrication of the textile-based composite is detailed, (3) converse effective d33 is evaluated and compared to lead zirconate titanate ceramic. The utility of textile-based piezoelectric merits its use in a wide array of applications.

  2. Total design for textile products

    Directory of Open Access Journals (Sweden)

    Zafirova Koleta

    2004-01-01

    Full Text Available Product development is less than 20-30 years old and a relatively new area of research compared to the other classic academic disciplines. Integrated product development is a philosophy that systematically employs the teaming of functional disciplines to integrate and concurrently apple all the necessary processes to produce an effective and efficient product that satisfies customer needs. Product development might also be understood as a multidisciplinary field of research. The disciplines directly participating in product development include engineering design, innovation, manufacturing, marketing and management. A background contribution is also generated by disciplines such as psychology, social sciences and information technology. This article is an overview that introduces this philosophy to textile product development.

  3. TEXTILE IMPACT PLATES FOR NANOPARTICLES

    Directory of Open Access Journals (Sweden)

    VISILEANU Emilia

    2017-05-01

    Full Text Available The paper presents textile materials with destination impact plates, having different surface architectures and active treatments for functionalization, with influence upon the aging process of nano-Ag and nano-CeO2. The woven and knitted samples from 100% cotton, cotton/PES blend and 100% PES were treated by impregnation on the laboratory padding machine, drying and condensing on the machine for drying-condensing-heat setting, with the following recipes: 50g/l RUCOSTAR EEE6+20 ml 5% nano-Ag dispersion, or 10% nano-CeO2 in ethylene glycol, respectively water and 0,5ml acetic acid 60% for products from 100% cotton and PES/cotton and 50g/l NUVA N 2114 liquid with the same percent of nanoparticles but with 1 ml/l acetic acid 60%, in case of 100% PES samples. The samples were treated in 2 steps – hydrophobic/ oleo phobic in the first stage and hydrophobic/ oleo phobic/ functionalization with nano-Ag and nano-CeO2 in the second stage. The complex characterization of both type of materials : hydrophobic and oleo phobic properties, color change, whitening degree, DCS, FT-IR, SEM and microbiology, evidenced through the obtained results the justness of the selection for: the raw materials (100% cotton, cotton/PES, 100% PES, the weave (plain, twill, rib, pique, the fabric tightness and fabric cover etc. These data allowed the elaboration of textile material’s specifications for impact plates.

  4. Annual Peak-Flow and Peak Dam-Pool-Elevation Frequency Characteristics of Selected Dry Dams in the Great Miami River Basin, Ohio

    Science.gov (United States)

    Koltun, G.F.

    2009-01-01

    This report describes the results of a study to determine frequency characteristics of post-regulation annual peak flows at streamflow-gaging stations near the Taylorsville, Huffman, and Germantown dry dams in the Miami Conservancy District flood-protection system (southwestern Ohio), and of annual peak elevations of the corresponding dam pools. Log-Pearson Type III distributions were fit to annual peak flow values for the period 1921 or 1922 through 2007 (the most recent year of published peak flow values at the time of this analysis) and annual peak dam-pool storage values for the period 1922- 2008 to determine peaks with recurrence intervals of 2, 5, 10, 25, 50, 100, 200, and 500 years. Once storages had been estimated for the various recurrence intervals, corresponding dam-pool elevations were determined from elevation-storage ratings provided by the Miami Conservancy District.

  5. Minidoka Dam Wildlife Impact Assessment: Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Robert C.; Meuleman, G. Allyn

    1989-03-01

    A wildlife impact assessment has been developed for the US Bureau of Reclamation's Minidoka Dam and Reservoir in south central Idaho. This assessment was conducted to fulfill requirements of the Fish and Wildlife Program. Specific objectives of this study included the following: select target wildlife species, and identify their current status and management goals; estimate the net effects on target wildlife species resulting from hydroelectric development and operation; recommend protection, mitigation, and enhancement goals for target wildlife species affected by hydroelectric development and operation; and consult and coordinate impact assessment activities with the Northwest Power Planning Council, Bonneville Power Administration, US Bureau of Reclamation, Bureau of Land Management, Shoshone-Bannock Tribes, US Fish and Wildlife Service, Pacific Northwest Utilities Conference Committee, and other entities expressing interest in the project. 62 refs., 2 figs., 11 tabs.

  6. Dam, Prof. Carl Peter Henrik

    Indian Academy of Sciences (India)

    ... Meetings · Public Lectures · Lecture Workshops · Refresher Courses · Symposia · Live Streaming. Home; Fellowship. Fellow Profile. Elected: 1965 Honorary. Dam, Prof. Carl Peter Henrik Nobel Laureate (Medicine) - 1943. Date of birth: 21 February 1895. Date of death: 17 April 1976. YouTube; Twitter; Facebook; Blog ...

  7. Characterization of Textile-Insulated Capacitive Biosensors

    Science.gov (United States)

    Ng, Charn Loong; Reaz, Mamun Bin Ibne

    2017-01-01

    Capacitive biosensors are an emerging technology revolutionizing wearable sensing systems and personal healthcare devices. They are capable of continuously measuring bioelectrical signals from the human body while utilizing textiles as an insulator. Different textile types have their own unique properties that alter skin-electrode capacitance and the performance of capacitive biosensors. This paper aims to identify the best textile insulator to be used with capacitive biosensors by analysing the characteristics of 6 types of common textile materials (cotton, linen, rayon, nylon, polyester, and PVC-textile) while evaluating their impact on the performance of a capacitive biosensor. A textile-insulated capacitive (TEX-C) biosensor was developed and validated on 3 subjects. Experimental results revealed that higher skin-electrode capacitance of a TEX-C biosensor yields a lower noise floor and better signal quality. Natural fabric such as cotton and linen were the two best insulating materials to integrate with a capacitive biosensor. They yielded the lowest noise floor of 2 mV and achieved consistent electromyography (EMG) signals measurements throughout the performance test. PMID:28287493

  8. Characterization of Textile-Insulated Capacitive Biosensors.

    Science.gov (United States)

    Ng, Charn Loong; Reaz, Mamun Bin Ibne

    2017-03-12

    Capacitive biosensors are an emerging technology revolutionizing wearable sensing systems and personal healthcare devices. They are capable of continuously measuring bioelectrical signals from the human body while utilizing textiles as an insulator. Different textile types have their own unique properties that alter skin-electrode capacitance and the performance of capacitive biosensors. This paper aims to identify the best textile insulator to be used with capacitive biosensors by analysing the characteristics of 6 types of common textile materials (cotton, linen, rayon, nylon, polyester, and PVC-textile) while evaluating their impact on the performance of a capacitive biosensor. A textile-insulated capacitive (TEX-C) biosensor was developed and validated on 3 subjects. Experimental results revealed that higher skin-electrode capacitance of a TEX-C biosensor yields a lower noise floor and better signal quality. Natural fabric such as cotton and linen were the two best insulating materials to integrate with a capacitive biosensor. They yielded the lowest noise floor of 2 mV and achieved consistent electromyography (EMG) signals measurements throughout the performance test.

  9. Greensilica® vectors for smart textiles.

    Science.gov (United States)

    Matos, Joana C; Avelar, Inês; Martins, M Bárbara F; Gonçalves, M Clara

    2017-01-20

    The present work aims developing a versatile Greensilica® vector/carrier, able to bind to a wide range of textile matrices of carbohydrate polymers and susceptible of being loaded with chemicals/drugs/therapeutic molecules, to create a green tailor-made (multi)functional high-tech textile. A green, eco-friendly, ammonia-free, easily scalable, time-saving sol-gel process was established for the production of those silica-based colloidal particles (SiO2, amine-SiO2, diamine-SiO2, and epoxy-SiO2). Two different textile matrices (cotton, polyester) were functionalized, through the impregnation of Greensilica® particles. The impregnation was performed with and without cure. Diamine-SiO2 colloidal particles exhibited the higher bonding efficiency in cured textile matrices (both cotton and polyester), while with no cure the best adherence to cotton and polyester textile matrices was achieved with diamine-SiO2 and amine-SiO2, respectively. Use once and throw away and continued use applications were envisaged and screened through washing tests. The efficiency of the textiles impregnation was confirmed by SEM, and quantified by ICP. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. CAREER DEVELOPMENT OF TEXTILE INDUSTRY EMPLOYEES

    Directory of Open Access Journals (Sweden)

    UROŠEVIĆ Snežana

    2017-05-01

    Full Text Available Textile industry is a very important industrial branch because it produces clothes for nearly seven billion people and textile materials for technical usage. It employs a huge number of competitive and qualified, mostly female work force. It is also technologically and technically challenging. Thus, it is vital to employ qualified and well trained employees with certain competences, knowledge and skills in order to respond to rapid technological and market changes. Here, we will consider the influence of the career development on doing business in the textile industry while acquiring the competitive advantage. Career development is a lifelong process and it is includes knowledge management. The term career has several meanings while nowadays it can mean advancement. The career usually reflects the professional development path of an individual during his or her working career. The career is that concept which connects and unifies most strongly and explicitly individual and organizational interests and needs. The theoretical part explains terms such as career development, importance and improvement of employees for an organization, the possibility for career development within the textile industry. The second part of the paper deals with research conducted among the employees of the textile sector in Leskovac, the town in Serbia with a long-lasting textile tradition.

  11. Research and development in the textile industry

    Energy Technology Data Exchange (ETDEWEB)

    None

    1987-06-01

    Included in the portfolio of IP's projects are the R and D activities for several advanced technologies targeted at the textile industry, one of the top ten energy intensive industries in the country. These R and D projects have primarily been aimed at improving the energy efficiency and productivity of textile production processes. Many projects in this area have been successfully completed, and some have resulted in the development and implementation of new technologies (e.g., foam processing) for various process steps. Other projects have produced technical results that have later been utilized by the industry in other capacities (e.g., hyperfiltration). Several projects at various stages of development are currently underway. This brochure describes the Office of Industrial Programs' R and D activities relevant to the textile industry. The brochure is comprised of the following: Industry Update, Energy Consumption in the Textile Industry, Energy Consumption in the Textile Industry, Potential Energy Savings in the Textile Industry, Office of Industrial Programs, R and D Efforts, and R and D Data Base.

  12. Research on Safety Factor of Dam Slope of High Embankment Dam under Seismic Condition

    Directory of Open Access Journals (Sweden)

    Li Bin

    2015-01-01

    Full Text Available With the constant development of construction technology of embankment dam, the constructed embankment dam becomes higher and higher, and the embankment dam with its height over 200m will always adopt the current design criteria of embankment dam only suitable for the construction of embankment dam lower than 200m in height. So the design criteria of high embankment dam shall be improved. We shall calculate the stability and safety factors of dam slope of high embankment dam under different dam height, slope ratio and different seismic intensity based on ratio of safety margin, and clarify the change rules of stability and safety factors of dam slope of high embankment dam with its height over 200m. We calculate the ratio of safety margin of traditional and reliable method by taking the stable, allowable and reliability index 4.2 of dam slope of high embankment dam with its height over 200m as the standard value, and conduct linear regression for both. As a result, the conditions, where 1.3 is considered as the stability and safety factors of dam slope of high embankment dam with its height over 200m under seismic condition and 4.2 as the allowable and reliability index, are under the same risk control level.

  13. Wearable electronics formed on intermediate layer on textiles

    KAUST Repository

    Hussain, Muhammad Mustafa

    2017-07-27

    One manner of producing more desirable clothing with electronic capabilities is to manufacture electronics, such as the charging wires or devices themselves, directly onto the textile materials. Textile materials generally do not support the manufacturing of electronic devices, in part because the surface of the textile is too rough for electronic devices or the processes used to manufacturing electronic devices. An intermediate layer (204) may be placed on the textile material (202) to reduce the roughness of the surface of the textile material and provide other beneficial characteristics for the placement of electronic devices (206) directly on the textile material.

  14. Resource Communication Technology and Marketing of Textile Products: A U.S. Textile Industry Case Study

    Science.gov (United States)

    Baah, Anthony

    2010-01-01

    The purpose of the qualitative positivistic case study was to explore whether resource communication technology has helped or would help the marketing of textile products in the U.S. textile industry. The contributions of human capital in the marketing department, the marketing-demand information system function, and the product supply chain…

  15. Research on shape optimization of CSG dams

    Directory of Open Access Journals (Sweden)

    Xin Cai

    2011-12-01

    Full Text Available The multi-objective optimization method was used for shape optimization of cement sand and gravel (CSG dams in this study. The economic efficiency, the sensitivities of maximum horizontal displacement and maximum settlement of the dam to water level changes, the overall stability, and the overall strength security were taken into account during the optimization process. Three weight coefficient selection schemes were adopted to conduct shape optimization of a dam, and the case studies lead to the conclusion that both the upstream and downstream dam slope ratios for the optimal cross-section equal 1:0.7, which is consistent with the empirically observed range of 1:0.6 to 1:0.8 for the upstream and downstream dam slope ratios of CSG dams. Therefore, the present study is of certain reference value for designing CSG dams.

  16. Environmental Management in Danish transnational textile product chains

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Jørgensen, Ulrik; Hendriksen, Kåre

    2010-01-01

    on capacity building at the suppliers in developing countries, while other companies seem to focus the complex activities at domestic suppliers. Two new facilitating actors in environmental management in product chains were identified. Research limitations and implications The focus on one sector in one......Purpose The purpose is to analyse environmental responsibility of companies from industrialized countries when they source materials and products in countries with less environmental protection. Methodology The article is a study of corporate environmental management in the Danish textile...... have a practice without environmental initiatives. Dominating types of initiatives are cleaner technology, environmental management systems and cleaner products. Driving forces are governmental regulation, customer demands, market expectations and protection of corporate brands. Some companies focus...

  17. Study of Dam-break Due to Overtopping of Four Small Dams in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Zakaraya Alhasan

    2015-01-01

    Full Text Available Dam-break due to overtopping is one of the most common types of embankment dam failures. During the floods in August 2002 in the Czech Republic, several small dams collapsed due to overtopping. In this paper, an analysis of the dam break process at the Luh, Velký Bělčický, Melín, and Metelský dams breached during the 2002 flood is presented. Comprehensive identification and analysis of the dam shape, properties of dam material and failure scenarios were carried out after the flood event to assemble data for the calibration of a numerical dam break model. A simple one-dimensional mathematical model was proposed for use in dam breach simulation, and a computer code was compiled. The model was calibrated using the field data mentioned above. Comparison of the erodibility parameters gained from the model showed reasonable agreement with the results of other authors.

  18. Proceedings of the 2010 Canadian Dam Association's public safety around dams workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    Nearly 30 people have drowned in dam-related incidents over the last 10 years in Canada. The Canadian public is now calling for improved safety guidelines. Public interaction with dams is increasing as a result of interest in extreme sports and perceived rights of access. However, many members of the public are not aware of the dangers posed by dams. This workshop provided a forum to discuss proposals for a draft publication of the Canadian Dam Association (CDA) guidelines for public safety and security around dams. Issues related to current legislation and liability were discussed. Methods of increasing public awareness of the hazards posed by dams included increased signage in dam locations, the use of audible and visual alert systems, and the use of booms and buoys. The responsibilities of dam owners in ensuring the safety of dams were also discussed. The conference featured 5 presentations, of which 2 have been catalogued separately for inclusion in this database. tabs., figs.

  19. Work-related injuries in textile industry workers in Turkey.

    Science.gov (United States)

    Serinken, Mustafa; Türkçüer, Ibrahim; Dağlı, Bekir; Karcıoğlu, Ozgür; Zencir, Mehmet; Uyanık, Emrah

    2012-01-01

    This study was conducted as a survey including work-related injuries (WRI) of workers in the textile and clothing industry admitted to the emergency department (ED). This prospective study included patients with WRI reportedly occurring in the textile and clothing industry over a two-year period. The study sample comprised only the casualties occurring at the workplace and while working de facto. A total of 374 patients were eligible for the study. More than three-fourths of the study sample were females (76.2%, n=285). A significant proportion of the patients were between 14 and 24 years of age (44.7%, n=167). Approximately two-thirds reported that this was their first admission to a hospital related to WRI (65.8%, n=246). WRIs occurred most frequently between 07:00-09:00 (27.3%) and 23:00-01:00 (17.9%). "Carelessness" and "rushing" were the most commonly reported causes of WRIs from the patients perspective (40.6% and 21.4%, respectively). Three-fourths of the patients reported that they were using protective equipment (74.3%, n=278). With respect to injury types, laceration/puncture/ amputation/avulsion injuries accounted for 55.6% (n=208) of the sample. Trauma to the upper extremities was the main type of injury in 75.1% (n=281) of the cases. Broad population-based studies are needed to define the situation as a whole in WRIs in the textile and clothing industry in the country. Strict measures should be undertaken and revised accordingly to prevent WRIs in these growing sectors.

  20. Coping with arsenic-based pesticides on Dine (Navajo) textiles

    Science.gov (United States)

    Anderson, Jae R.

    Arsenic-based pesticide residues have been detected on Arizona State Museum's (ASM) Dine (Navajo) textile collection using a handheld portable X-ray (pXRF) spectrometer. The removal of this toxic pesticide from historic textiles in museums collections is necessary to reduce potential health risks to Native American communities, museum professionals, and visitors. The research objective was divided into three interconnected stages: (1) empirically calibrate the pXRF instrument for arsenic contaminated cotton and wool textiles; (2) engineer an aqueous washing treatment exploring the effects of time, temperature, agitation, and pH conditions to efficiently remove arsenic from wool textiles while minimizing damage to the structure and properties of the textile; (3) demonstrate the devised aqueous washing treatment method on three historic Navajo textiles known to have arsenic-based pesticide residues. The preliminary results removed 96% of arsenic from a high arsenic concentration (~1000 ppm) textile opposed to minimal change for low arsenic concentration textiles (<100 ppm).

  1. Submicrometre particle filtration with a dc activated plasma textile

    Science.gov (United States)

    Rasipuram, S. C.; Wu, M.; Kuznetsov, I. A.; Kuznetsov, A. V.; Levine, J. F.; Jasper, W. J.; Saveliev, A. V.

    2014-01-01

    Plasma textiles are novel fabrics incorporating the advantages of cold plasma and low-cost non-woven or woven textile fabrics. In plasma textiles, electrodes are integrated into the fabric, and a corona discharge is activated within and on the surface of the fabric by applying high voltages above 10 kV between the electrodes. When the plasma textile is activated, submicrometre particles approaching the textile are charged by the deposition of ions and electrons produced by the corona, and then collected by the textile material. A stable plasma discharge was experimentally verified on the surface of the textile that was locally smooth but not rigid. A filtration efficiency close to 100% was observed in experiments conducted on salt particles with diameters ranging from 50 to 300 nm. Unlike conventional fibrous filters, the plasma textile provided uniform filtration in this range, without exhibiting a maximum particle penetration size.

  2. Powder avalanche and catching dam interaction : influence of upstream dam slope ?

    Science.gov (United States)

    Caccamo, Paolo; Naaim-Bouvet, Florence; Faug, Thierry

    2013-04-01

    The influence of an obstacle on the dynamics of a finite-volume density current modelling a powder-snow avalanche was investigated. A constant volume of a dyed salt solution reproduced the small-scale aerosol flowing down an inclined channel immersed in a water tank. Reference tests in the absence of the obstacle characterized the dynamics parameters of the flow and then the influence of two different types of obstacles on these parameters was studied. Both of the obstacles represent a catching dam one with a vertical uphill face (OBS1) and the second one with an inclined uphill face 32° (OBS2). A high resolution acoustic velocimeter allows measurements on the 3D Flow velocity. For the reference avalanche, it was shown that the maximum velocity norm can be up to 18% greater than the maximum horizontal contribution (parallel to the slope) and that the ratio maximum velocity norm over front velocity varies between 1.75 and 2.2. THis ratio varies between 1.7 and 2.8 for the obstacles situation. In terms of protection effectiveness, laboratory tests showed that a catching dam with the upstream vertical to the slope is more efficient than a dam with an inclined upstream face. In presence of OBS2 the flow does not hit the obstacle but it rather passes smoothly over it, without any visible detachment from the surface. The ramp effect is remarkable and the avalanche reaches faster (in terms of time) a given point downstream from the obstacle. On the contrary, in the OBS1 configuration, the incoming flow hits the vertical wall and bursts. The flow is subjected to a strong deflection with the formation of a vertical jet.

  3. Properties of Matter of Awa Textile from Linden Bark

    OpenAIRE

    宮本, 栞; 山下, そのみ

    2003-01-01

    The fabric structure, the mechanical properties and the sanitary properties of Awa textile from linden bark were compared with those of shirting and linen cloth. The form of fiber of weaving yarns of Awa textile from linden bark was observed by a scanning electron microscope. The change in whiteness of Awa textile with washing times through colorimetry. The results obtained were as followed. 1) Awa textile resembled linen cloth in the fiber surface and shirting in the fiber cross section. But...

  4. Brazil's Amazonian dams: Ecological and socioeconomic impacts

    Science.gov (United States)

    Fearnside, P. M.

    2016-12-01

    Brazil's 2015-2024 Energy Expansion Plan calls for 11 hydroelectric dams with installed capacity ≥ 30 MW in the country's Amazon region. Dozens of other large dams are planned beyond this time horizon, and dams with consumers. Population displacement is a major impact; for example, the Marabá Dam would displace 40,000 people, mostly traditional riverside dwellers (ribeirinhos). Various dams impact indigenous peoples, such as the Xingu River dams (beginning with Belo Monte) and the São Luiz do Tapajós and Chacorão Dams on the Tapajós River. Brazil has many energy options other than dams. Much energy use has little benefit for the country, such as exporting aluminum. Electric showerheads use 5% of the country's power. Losses in transmission lines (20%) are far above global averages and can be expected to increase as Amazonian hydroelectric dams far from consumer centers come on line. Brazil has tremendous wind and solar potential, but these do not have the same priority as dams. At the root of many questionable policies is a decision-making process in need of reform.

  5. Electrical Textile Valves for Paper Microfluidics.

    Science.gov (United States)

    Ainla, Alar; Hamedi, Mahiar M; Güder, Firat; Whitesides, George M

    2017-10-01

    This paper describes electrically-activated fluidic valves that operate based on electrowetting through textiles. The valves are fabricated from electrically conductive, insulated, hydrophobic textiles, but the concept can be extended to other porous materials. When the valve is closed, the liquid cannot pass through the hydrophobic textile. Upon application of a potential (in the range of 100-1000 V) between the textile and the liquid, the valve opens and the liquid penetrates the textile. These valves actuate in less than 1 s, require low energy (≈27 µJ per actuation), and work with a variety of aqueous solutions, including those with low surface tension and those containing bioanalytes. They are bistable in function, and are, in a sense, the electrofluidic analog of thyristors. They can be integrated into paper microfluidic devices to make circuits that are capable of controlling liquid, including autonomous fluidic timers and fluidic logic. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Supercritical water oxidation treatment of textile sludge.

    Science.gov (United States)

    Zhang, Jie; Wang, Shuzhong; Li, Yanhui; Lu, Jinling; Chen, Senlin; Luo, XingQi

    2017-08-01

    In this work, we studied the supercritical water oxidation (SCWO) of the textile sludge, the hydrothermal conversion of typical textile compounds and the corrosion properties of stainless steel 316. Moreover, the influence mechanisms of NaOH during these related processes were explored. The results show that decomposition efficiency for organic matter in liquid phase of the textile sludge was improved with the increment of reaction temperature or oxidation coefficient. However, the organic substance in solid phase can be oxidized completely in supercritical water. Serious coking occurred during the high pressure water at 250-450°C for the Reactive Orange 7, while at 300 and 350°C for the polyvinyl alcohol. The addition of NaOH not only accelerated the destruction of organic contaminants in the SCWO reactor, but effectively inhibited the dehydration conversion of textile compounds during the preheating process, which was favorable for the treatment system of textile sludge. The corrosion experiment results indicate that the stainless steel 316 could be competent for the body materials of the reactor and the heat exchangers. Furthermore, there was prominent enhancement of sodium hydroxide for the corrosion resistance of 316 in subcritical water. On the contrary the effect was almost none during SCWO.

  7. Development and characterization of textile batteries

    Science.gov (United States)

    Normann, M.; Grethe, T.; Schwarz-Pfeiffer, A.; Ehrmann, A.

    2017-02-01

    During the past years, smart textiles have gained more and more attention. Products cover a broad range of possible applications, from fashion items such as LED garments to sensory shirts detecting vital signs to clothes with included electrical stimulation of muscles. For all electrical or electronic features included in garments, a power supply is needed - which is usually the bottleneck in the development of smart textiles, since common power supplies are not flexible and often not lightweight, prohibiting their unobtrusive integration in electronic textiles. In a recent project, textile-based batteries are developed. For this, metallized woven fabrics (e.g. copper, zinc, or silver) are used in combinations with carbon fabrics. The article gives an overview of our recent advances in optimizing power storage capacity and durability of the textile batteries by tailoring the gel-electrolyte. The gel-electrolyte is modified with respect to thickness and electrolyte concentration; additionally, the influence of additives on the long-time stability of the batteries is examined.

  8. Dermatophyte susceptibility varies towards antimicrobial textiles.

    Science.gov (United States)

    Hammer, Timo R; Mucha, Helmut; Hoefer, Dirk

    2012-07-01

    Dermatophytoses are a widespread problem worldwide. Textiles in contact with infected skin can serve as a carrier for fungus propagation. Hitherto, it is unknown, whether antifungal textiles could contribute in controlling dermatophytes e.g. by disrupting the chain of infection. Testing of antimicrobial fabrics for their antifungal activities therefore is a fundamental prerequisite to assess the putative clinical relevance of textiles for dermatophyte prevention. Fabrics finished with either didecyldimethylammonium chloride (DDAC), poly-hexamethylenbiguanide, copper and two silver chloride concentrations were tested for their antifungal activity against Trichophyton rubrum, Trichophyton mentagrophytes and Candida albicans. To prove dermatophyte susceptibility towards the textiles, swatches were subjected to DIN EN 14199 (Trichophyton sp.) or DIN EN ISO 20743 (C. albicans) respectively. In addition, samples were embedded, and semi-thin sections were analysed microscopically. While all samples showed a clear inhibition of C. albicans, activity against Trichophyton sp. varied significantly: For example, DDAC completely inhibited T. rubrum growth, whereas T. mentagrophytes growth remained unaffected even in direct contact to the fibres. The results favour to add T. mentagrophytes as a test organism in textile dermatophyte efficacy tests. Microscopic analysis of swatches allowed detailed evaluation of additional parameters like mycelium thickness, density and hyphae penetration depth into the fabric. © 2011 Blackwell Verlag GmbH.

  9. A review of proposed Glen Canyon Dam interim operating criteria

    Energy Technology Data Exchange (ETDEWEB)

    LaGory, K.; Hlohowskyj, I.; Tomasko, D.; Hayse, J.; Durham, L.

    1992-04-01

    Three sets of interim operating criteria for Glen Canyon Dam on the Colorado River have been proposed for the period of November 1991, to the completion of the record of decision for the Glen Canyon Dam environmental impact statement (about 1993). These criteria set specific limits on dam releases, including maximum and minimum flows, up-ramp and down-ramp rates, and maximum daily fluctuation. Under the proposed interim criteria, all of these parameters would be reduced relative to historical operating criteria to protect downstream natural resources, including sediment deposits, threatened and endangered fishes, trout, the aquatic food base, and riparian plant communities. The scientific bases of the three sets of proposed operating criteria are evaluated in the present report:(1) criteria proposed by the Research/Scientific Group, associated with the Glen Canyon Environmental Studies (GCES); (2) criteria proposed state and federal officials charged with managing downstream resources; and (3) test criteria imposed from July 1991, to November 1991. Data from Phase 1 of the GCES and other sources established that the targeted natural resources are affected by dam operations, but the specific interim criteria chosen were not supported by any existing studies. It is unlikely that irreversible changes to any of the resources would occur over the interim period if historical operating criteria remained in place. It is likely that adoption of any of the sets of proposed interim operating criteria would reduce the levels of sediment transport and erosion below Glen Canyon Dam; however, these interim criteria could result in some adverse effects, including the accumulation of debris at tributary mouths, a shift of new high-water-zone vegetation into more flood-prone areas, and further declines in vegetation in the old high water zone.

  10. Aerobic Bacterial degraders in effluent from Itoku textile industry ...

    African Journals Online (AJOL)

    The local textile industry in Itokun village is one major textile industry in Abeokuta Ogun state, known for “adire” production whose processes are not maintained at regulatory standards. This study involves isolating and identifying aerobic microorganisms in waste water effluents from this textile Industry and screening for ...

  11. Nettle as a distinct Bronze Age textile plant

    DEFF Research Database (Denmark)

    Bergfjord, C.; Mannering, Ulla; Frei, Karin Margarita

    2012-01-01

    It is generally assumed that the production of plant fibre textiles in ancient Europe, especially woven textiles for clothing, was closely linked to the development of agriculture through the use of cultivated textile plants (flax, hemp). Here we present a new investigation of the 2800 year old...

  12. Woven sculptural piece as added dimension to textile design ...

    African Journals Online (AJOL)

    Woven sculptural piece as added dimension to textile design. ... Mgbakoigba: Journal of African Studies ... However, if adequate attention is given to it, it can be combined with other textile materials, independently to create desirable design, which can compete favorably in the international textile and arts market. Keywords: ...

  13. 19 CFR 11.12b - Labeling textile fiber products.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Labeling textile fiber products. 11.12b Section 11... THE TREASURY PACKING AND STAMPING; MARKING Marking § 11.12b Labeling textile fiber products. (a) Textile fiber products imported into the United States shall be labeled or marked in accordance with the...

  14. 16 CFR 303.12 - Trimmings of household textile articles.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Trimmings of household textile articles. 303... CONGRESS RULES AND REGULATIONS UNDER THE TEXTILE FIBER PRODUCTS IDENTIFICATION ACT § 303.12 Trimmings of household textile articles. (a) Trimmings incorporated in articles of wearing apparel and other household...

  15. 19 CFR 10.771 - Textile or apparel goods.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Textile or apparel goods. 10.771 Section 10.771... Agreement Rules of Origin § 10.771 Textile or apparel goods. (a) De minimis. Except as provided in paragraph (a)(1) of this section, a textile or apparel good that is not an originating good under the MFTA...

  16. 19 CFR 102.21 - Textile and apparel products.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Textile and apparel products. 102.21 Section 102... THE TREASURY RULES OF ORIGIN Rules of Origin § 102.21 Textile and apparel products. (a) Applicability... control the determination of the country of origin of imported textile and apparel products for purposes...

  17. 19 CFR 10.811 - Textile or apparel goods.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Textile or apparel goods. 10.811 Section 10.811... Agreement Rules of Origin § 10.811 Textile or apparel goods. (a) De minimis—(1) General. Except as provided in paragraph (a)(2) of this section, a textile or apparel good that is not an originating good under...

  18. Multilevel modelling of mechanical properties of textile composites: ITOOL Project

    NARCIS (Netherlands)

    Van Den Broucke, Bjorn; Drechsler, Klaus; Hanisch, Vera; Hartung, Daniel; Ivanov, Dimitry S.; Koysin, V.; Lomov, Stepan V.; Middendorf, Peter

    2007-01-01

    The paper presents an overview of the multi-level modelling of textile composites in the ITOOL project, focusing on the models of textile reinforcements, which serve as a basis for micromechanical models of textile composites on the unit cell level. The modelling is performed using finite element

  19. Characterization of orange oil microcapsules for application in textiles

    Science.gov (United States)

    Rossi, W.; Bonet-Aracil, M.; Bou-Belda, E.; Gisbert-Payá, J.; Wilson, K.; Roldo, L.

    2017-10-01

    The use of orange oil presents as an ecological alternative to chemicals, attracting the attention of the scientific community to the development of eco-friendly antimicrobials. The microencapsulation technology has been used for the application of orange oil to textiles, being an economically viable, fast and efficient method by combining core and shell materials, desirable perceptual and functional characteristics, responsible for properties related to the nature of the product and provides that the wall materials release the functional substances in a controlled manner, in addition to effectively protecting and isolating the core material from the external environment to prevent its volatilization and deterioration, increasing the stability of the oil, such as non-toxicity. Thus, to better exploit the properties of the orange essential oil applied to textile products this study presents a characterization of microcapsules of Melamine formaldehyde obtained by the interfacial polymerization method with variations of proportions of orange oil (volatile) with fixed oil Medium-Chain Triglycerides (MCT) (non-volatile) to assist in the stability of the orange essential oil. Scanning electron microscope (SEM) was used as visualizing tool to characterize microparticles and surface morphology and thermal characteristics of microcapsules were premeditated by mean Differential scanning calorimetry (DSC).

  20. Exporting dams: China's hydropower industry goes global.

    Science.gov (United States)

    McDonald, Kristen; Bosshard, Peter; Brewer, Nicole

    2009-07-01

    In line with China's "going out" strategy, China's dam industry has in recent years significantly expanded its involvement in overseas markets. The Chinese Export-Import Bank and other Chinese financial institutions, state-owned enterprises, and private firms are now involved in at least 93 major dam projects overseas. The Chinese government sees the new global role played by China's dam industry as a "win-win" situation for China and host countries involved. But evidence from project sites such as the Merowe Dam in Sudan demonstrates that these dams have unrecognized social and environmental costs for host communities. Chinese dam builders have yet to adopt internationally accepted social and environmental standards for large infrastructure development that can assure these costs are adequately taken into account. But the Chinese government is becoming increasingly aware of the challenge and the necessity of promoting environmentally and socially sound investments overseas.

  1. Proliferation of Hydroelectric Dams in the Andean Amazon and Implications for Andes-Amazon Connectivity

    Science.gov (United States)

    Finer, Matt; Jenkins, Clinton N.

    2012-01-01

    Due to rising energy demands and abundant untapped potential, hydropower projects are rapidly increasing in the Neotropics. This is especially true in the wet and rugged Andean Amazon, where regional governments are prioritizing new hydroelectric dams as the centerpiece of long-term energy plans. However, the current planning for hydropower lacks adequate regional and basin-scale assessment of potential ecological impacts. This lack of strategic planning is particularly problematic given the intimate link between the Andes and Amazonian flood plain, together one of the most species rich zones on Earth. We examined the potential ecological impacts, in terms of river connectivity and forest loss, of the planned proliferation of hydroelectric dams across all Andean tributaries of the Amazon River. Considering data on the full portfolios of existing and planned dams, along with data on roads and transmission line systems, we developed a new conceptual framework to estimate the relative impacts of all planned dams. There are plans for 151 new dams greater than 2 MW over the next 20 years, more than a 300% increase. These dams would include five of the six major Andean tributaries of the Amazon. Our ecological impact analysis classified 47% of the potential new dams as high impact and just 19% as low impact. Sixty percent of the dams would cause the first major break in connectivity between protected Andean headwaters and the lowland Amazon. More than 80% would drive deforestation due to new roads, transmission lines, or inundation. We conclude with a discussion of three major policy implications of these findings. 1) There is a critical need for further strategic regional and basin scale evaluation of dams. 2) There is an urgent need for a strategic plan to maintain Andes-Amazon connectivity. 3) Reconsideration of hydropower as a low-impact energy source in the Neotropics. PMID:22529979

  2. Proliferation of hydroelectric dams in the Andean Amazon and implications for Andes-Amazon connectivity.

    Directory of Open Access Journals (Sweden)

    Matt Finer

    Full Text Available Due to rising energy demands and abundant untapped potential, hydropower projects are rapidly increasing in the Neotropics. This is especially true in the wet and rugged Andean Amazon, where regional governments are prioritizing new hydroelectric dams as the centerpiece of long-term energy plans. However, the current planning for hydropower lacks adequate regional and basin-scale assessment of potential ecological impacts. This lack of strategic planning is particularly problematic given the intimate link between the Andes and Amazonian flood plain, together one of the most species rich zones on Earth. We examined the potential ecological impacts, in terms of river connectivity and forest loss, of the planned proliferation of hydroelectric dams across all Andean tributaries of the Amazon River. Considering data on the full portfolios of existing and planned dams, along with data on roads and transmission line systems, we developed a new conceptual framework to estimate the relative impacts of all planned dams. There are plans for 151 new dams greater than 2 MW over the next 20 years, more than a 300% increase. These dams would include five of the six major Andean tributaries of the Amazon. Our ecological impact analysis classified 47% of the potential new dams as high impact and just 19% as low impact. Sixty percent of the dams would cause the first major break in connectivity between protected Andean headwaters and the lowland Amazon. More than 80% would drive deforestation due to new roads, transmission lines, or inundation. We conclude with a discussion of three major policy implications of these findings. 1 There is a critical need for further strategic regional and basin scale evaluation of dams. 2 There is an urgent need for a strategic plan to maintain Andes-Amazon connectivity. 3 Reconsideration of hydropower as a low-impact energy source in the Neotropics.

  3. Fibrous and textile materials for composite applications

    CERN Document Server

    Fangueiro, Raul

    2016-01-01

    This book focuses on the fibers and textiles used in composite materials. It presents both existing technologies currently used in commercial applications and the latest advanced research and developments. It also discusses the different fiber forms and architectures, such as short fibers, unidirectional tows, directionally oriented structures or advanced 2D- and 3D-textile structures that are used in composite materials. In addition, it examines various synthetic, natural and metallic fibers that are used to reinforce polymeric, cementitious and metallic matrices, as well as fiber properties, special functionalities, manufacturing processes, and composite processing and properties. Two entire chapters are dedicated to advanced nanofiber and nanotube reinforced composite materials. The book goes on to highlight different surface treatments and finishes that are applied to improve fiber/matrix interfaces and other essential composite properties. Although a great deal of information about fibers and textile str...

  4. Wearable Textile Electrodes for ECG Measurement

    Directory of Open Access Journals (Sweden)

    Lukas Vojtech

    2013-01-01

    Full Text Available The electrocardiogram (ECG is one of the most important parameters for monitoring of the physiological state of a person. Currently available systems for ECG monitoring are both stationary and wearable, but the comfort of the monitored person is not at a satisfactory level because these systems are not part of standard clothing. This article is therefore devoted to the development and measurement of wearable textile electrodes for ECG measurement device with high comfort for the user. The electrode material is made of electrically conductive textile. This creates a textile composite that guarantees high comfort for the user while ensuring good quality of ECG measurements. The composite is implemented by a carrier (a T-shirt with flame retardant and sensing electrodes embroidered with yarn based on a mixture of polyester coated with silver nanoparticles and cotton. The electrodes not only provide great comfort but are also antibacterial and antiallergic due to silver nanoparticles.

  5. How Associative Material Characteristics Create Textile Reflection

    DEFF Research Database (Denmark)

    Hasling, Karen Marie; Bang, Anne Louise

    2015-01-01

    and meanings. As educators of future designers we are concerned with teaching students, how to develop and use materials for ‘future design’ in a way that embrace multiple properties, including aesthetic, technical, functional and sustainable concerns. In this study we are specifically concerned......Product design, and especially relevant for this study textiles design, is concerned with designing not only the product itself, but just as much the material, which forms the product. It is further highly relevant that designers relate their materials and product to an existing context...... materials and to reflect on, how personal associations can be embodied in [textile] materials. The discussion and results of the study stressed the coherence and differences of textile techniques used to express the given keywords and how the assignment has influenced the students’ material practice. How...

  6. Numerical Simulation of Downstream Flooding due to a Flexible-Dam Collapse. The case of "La Esperanza" dam, Hidalgo-México: Implication on Hazard Assessment.

    Science.gov (United States)

    Areu Rangel, O. S., Sr.; Mendoza-Sanchez, I.; Bonasia, R.

    2015-12-01

    The risk of flooding of settlements located downstream of a dam is high due to the large number of people living on natural waterways. Risk assessment of flooding could help in projecting containment and protection in case of a dam-break. For projecting containment and protection works, the assessment should take into account velocities, densities and impact pressure of the water on the villages in risk. Therefore, it is appealing to conduct a series of numerical simulations of downstream flooding including velocity and pressure fields, and their temporal and spatial fluctuations. The present work focuses on the real case of "La Esperanza" dam, located in the state of Hidalgo (Mexico). The dam was built 70 years ago and currently two thirds of its capacity is covered with silt, which implies a very high horizontal thrust. The simulation of the flood due to failure of the dam was carried on using the DualSPHysics code, a new implementation of the mesh-free Lagrangian Smoothed Particle Hydrodynamic (SPH) method. For the boundary conditions, a Digital Elevation Model of the potentially affected area was built using satellite images, the actual bathymetry of the dam and cross sections of the channel. In order to evaluate the hazard posed to the villages located downstream of the dam, different collapse scenarios were simulated, with particular focus on the consequences of the temporal variation of rainfall. Preliminary results show acceleration and dynamic pressure values of water in especially selected areas that are subjected to high risk for the elevated number of inhabitant.

  7. Measurement of Dam Deformations: Case Study of Obruk Dam (Turkey)

    Science.gov (United States)

    Gulal, V. Engin; Alkan, R. Metin; Alkan, M. Nurullah; İlci, Veli; Ozulu, I. Murat; Tombus, F. Engin; Kose, Zafer; Aladogan, Kayhan; Sahin, Murat; Yavasoglu, Hakan; Oku, Guldane

    2016-04-01

    In the literature, there is information regarding the first deformation and displacement measurements in dams that were conducted in 1920s Switzerland. Todays, deformation measurements in the dams have gained very different functions with improvements in both measurement equipment and evaluation of measurements. Deformation measurements and analysis are among the main topics studied by scientists who take interest in the engineering measurement sciences. The Working group of Deformation Measurements and Analysis, which was established under the International Federation of Surveyors (FIG), carries out its studies and activities with regard to this subject. At the end of the 1970s, the subject of the determination of fixed points in the deformation monitoring network was one of the main subjects extensively studied. Many theories arose from this inquiry, as different institutes came to differing conclusions. In 1978, a special commission with representatives of universities has been established within the FIG 6.1 working group; this commission worked on the issue of determining a general approach to geometric deformation analysis. The results gleaned from the commission were discussed at symposiums organized by the FIG. In accordance with these studies, scientists interested in the subject have begun to work on models that investigate cause and effect relations between the effects that cause deformation and deformation. As of the scientist who interest with the issue focused on different deformation methods, another special commission was established within the FIG engineering measurements commission in order to classify deformation models and study terminology. After studying this material for a long time, the official commission report was published in 2001. In this prepared report, studies have been carried out by considering the FIG Engineering Surveying Commission's report entitled, 'MODELS AND TERMINOLOGY FOR THE ANALYSIS OF GEODETIC MONITORING OBSERVATIONS

  8. Global Reservoir and Dam Database, Version 1 (GRanDv1): Dams, Revision 01

    Data.gov (United States)

    National Aeronautics and Space Administration — The Global Reservoir and Dam Database, Version 1 (Revision 01) contains 6,862 records of reservoirs and their associated dams with a cumulative storage capacity of...

  9. Global Reservoir and Dam Database, Version 1 (GRanDv1): Dams, Revision 01

    Data.gov (United States)

    National Aeronautics and Space Administration — The Global Reservoir and Dam Database, Version 1, Revision 01 (v1.01) contains 6,862 records of reservoirs and their associated dams with a cumulative storage...

  10. Energy-Efficiency Improvement Opportunities for the Textile Industry

    Energy Technology Data Exchange (ETDEWEB)

    China Energy Group; Hasanbeigi, Ali

    2010-09-29

    The textile industry is one of the most complicated manufacturing industries because it is a fragmented and heterogeneous sector dominated by small and medium enterprises (SMEs). Energy is one of the main cost factors in the textile industry. Especially in times of high energy price volatility, improving energy efficiency should be a primary concern for textile plants. There are various energy-efficiency opportunities that exist in every textile plant, many of which are cost-effective. However, even cost-effective options often are not implemented in textile plants mostly because of limited information on how to implement energy-efficiency measures, especially given the fact that a majority of textile plants are categorized as SMEs and hence they have limited resources to acquire this information. Know-how on energy-efficiency technologies and practices should, therefore, be prepared and disseminated to textile plants. This guidebook provides information on energy-efficiency technologies and measures applicable to the textile industry. The guidebook includes case studies from textile plants around the world and includes energy savings and cost information when available. First, the guidebook gives a brief overview of the textile industry around the world, with an explanation of major textile processes. An analysis of the type and the share of energy used in different textile processes is also included in the guidebook. Subsequently, energy-efficiency improvement opportunities available within some of the major textile sub-sectors are given with a brief explanation of each measure. The conclusion includes a short section dedicated to highlighting a few emerging technologies in the textile industry as well as the potential for the use of renewable energy in the textile industry.

  11. Layer-by-Layer Photocatalytic Assembly for Solar Light-Activated Self-Decontaminating Textiles.

    Science.gov (United States)

    Truong-Phuoc, Lai; Christoforidis, Konstantinos C; Vigneron, Fabrice; Papaefthimiou, Vasiliki; Decher, Gero; Keller, Nicolas; Keller, Valérie

    2016-12-21

    Novel photocatalytic nanomaterials that can be used to functionalize textiles, conferring to them efficient solar-light-activated properties for the decontamination of toxic and lethal agents, are described. Textiles functionalized with one-dimensional (1D) SnS2-based nanomaterials were used for photocatalytic applications for the first time. We showed that 1D SnS2/TiO2 nanocomposites can be easily and strongly affixed onto textiles using the layer-by-layer deposition method. Ultrathin SnS2 nanosheets were associated with anatase TiO2 nanofibers to form nano-heterojunctions with a tight interface, considerably increasing the photo-oxidative activity of anatase TiO2 due to the beneficial interfacial transfer of photogenerated charges and increased oxidizing power. Moreover, it is easy to process the material on a larger scale and to regenerate these functionalized textiles. Our findings may aid the development of functionalized clothing with solar light-activated photocatalytic properties that provide a high level of protection against chemical warfare agents.

  12. Preparation of a Textile-Based Dye-Sensitized Solar Cell

    Directory of Open Access Journals (Sweden)

    Klaus Opwis

    2016-01-01

    Full Text Available Solar energy conversion is an object of continuous research, focusing on improving the energy efficiency as well as the structure of photovoltaic cells. With efficiencies continuously increasing, state-of-the-art PV cells offer a good solution to harvest solar energy. However, they are still lacking the flexibility and conformability to be integrated into common objects or clothing. Moreover, many sun-exposed surface areas are textile-based such as garments, tents, truck coverings, boat sails, and home or outdoor textiles. Here, we present a new textile-based dye-sensitized solar cell (DSC which takes advantage from the properties inherent to fabrics: flexibility, low weight, and mechanical robustness. Due to the necessary thermostability during manufacturing, our DSC design is based on heat-resistant glass-fiber fabrics. After applying all needed layers, the overall structure was covered by a transparent and simultaneously conductive protective film. The light and still flexible large-area devices (up to 6 cm2 per individual unit are working with efficiencies up to 1.8% at 1/5 of the sun. Stability tests assure no loss of photovoltaic activity over a period of at least seven weeks. Therefore, our technology has paved the way for a new generation of flexible photovoltaic devices, which can be used for the generation of power in the mentioned applications as well as in modern textile architecture.

  13. Analysis of in vivo penetration of textile dyes causing allergic reactions

    Science.gov (United States)

    Lademann, J.; Patzelt, A.; Worm, M.; Richter, H.; Sterry, W.; Meinke, M.

    2009-10-01

    Contact allergies to textile dyes are common and can cause severe eczema. In the present study, we investigated the penetration of a fluorescent textile dye, dissolved from a black pullover, into the skin of one volunteer during perspiration and nonperspiration. Previously, wearing this pullover had induced a severe contact dermatitis in an 82-year old woman, who was not aware of her sensitization to textile dyes. The investigations were carried out by in vivo laser scanning microscopy. It could be demonstrated that the dye was eluted from the textile material by sweat. Afterwards, the dye penetrated into the stratum corneum and into the hair follicles. Inside the hair follicles, the fluorescent signal was still detectable after 24 h, whereas it was not verifiable anymore in the stratum corneum, Laser scanning microscopy represents an efficient tool for in vivo investigation of the penetration and storage of topically applied substances and allergens into the human skin and reveals useful hints for the development and optimization of protection strategies.

  14. Smart textile for respiratory monitoring and thoraco-abdominal motion pattern evaluation.

    Science.gov (United States)

    Massaroni, Carlo; Venanzi, C; Silvatti, A P; Lo Presti, D; Saccomandi, P; Formica, D; Giurazza, F; Caponero, M A; Schena, Emiliano

    2018-01-03

    The use of wearable systems for monitoring vital parameters has gained wide popularity in several medical fields. The focus of the present study is the experimental assessment of a smart textile based on twelve fiber Bragg grating sensors for breathing monitoring and thoraco-abdominal motion pattern analysis. The feasibility of the smart textile for monitoring several temporal respiratory parameters (i.e., breath-by-breath respiratory period, breathing frequency, duration of inspiratory and expiratory phases), volume variations of the whole chest wall and of its compartments is performed on eight healthy male volunteers. Values gathered by the textile are compared to the data obtained by a motion analysis system, used as reference instrument. Good agreement between the two systems on both respiratory period (bias of 0.01 s), breathing frequency (bias of -0.02 breaths∙min -1 ) and tidal volume (bias of 0.09 L) values is demonstrated. Smart textile shows good performance in the monitoring of thoraco-abdominal pattern and its variation, as well. This article is protected by copyright. All rights reserved.

  15. Smart Textiles in Humanistic Hospital Design

    DEFF Research Database (Denmark)

    Mogensen, Jeppe; Fisker, Anna Marie; Poulsen, Søren Bolvig

    2014-01-01

    Hospitalised patients’ healing process, supported by stimulating architecture. In this regard, we address focus on the potential influence of the design principle, discussing how healing architecture may contribute in making the future hospital institutions more responsive to human needs. The main...... of some of the stakeholders involved in the design process? Relating to the Danish scene of hospital design, we introduce the research project “Smart Textiles in Future Hospitals”, stating the overall hypothesis that textiles in hospital interiors possess an unexploited architectural potential in relation...

  16. A New ‘T’ for Textiles

    DEFF Research Database (Denmark)

    Earley, Rebecca; Vuletich, Clara; Hadridge, Phil

    2016-01-01

    The paper is based on a training programme given to researchers in the Textiles Environment Design (TED) project at the University of the Arts London (UAL). The programme took place over three years (September 2010 to October 2013) whilst the researchers were engaged as consultants and researchers...... sustainable design strategies for textiles and fashion was the framework for the Sustainable Design Inspiration (SDI) work at H&M – a broad and holistic approach to redesigning products including materials, process, systems, services, consumer behaviour and activism....

  17. TEXTILE PATTERNS BASED ON ANCIENT EGYPTIAN ORNAMENTS

    Directory of Open Access Journals (Sweden)

    ElSayed ElNashar

    2016-10-01

    Full Text Available A developed digital collection of textile patterns is presented Iin the report. As objects in this collection designed modern textile prints developed on the basis of elements of ancient Egyptian costume are included. Software tools are developed to obtain colors, shapes and descriptions of the used ancient Egyptian elements. The resulting elements are in vector format, and can be used in CAD systems and spreadsheets. Descriptions of these motifs can be used for comparison with such elements from other national costumes.

  18. Comparative evaluation of antimicrobials for textile applications.

    Science.gov (United States)

    Windler, Lena; Height, Murray; Nowack, Bernd

    2013-03-01

    Many antimicrobial technologies are available for textiles. They may be used in many different textile applications to prevent the growth of microorganisms. Due to the biological activity of the antimicrobial compounds, the assessment of the safety of these substances is an ongoing subject of research and regulatory scrutiny. This review aims to give an overview on the main compounds used today for antimicrobial textile functionalization. Based on an evaluation of scientific publications, market data as well as regulatory documents, the potential effects of antimicrobials on the environment and on human health were considered and also life cycle perspectives were taken into account. The characteristics of each compound were summarized according to technical, environmental and human health criteria. Triclosan, silane quaternary ammonium compounds, zinc pyrithione and silver-based compounds are the main antimicrobials used in textiles. The synthetic organic compounds dominate the antimicrobials market on a weight basis. On the technical side the application rates of the antimicrobials used to functionalize a textile product are an important parameter with treatments requiring lower dosage rates offering clear benefits in terms of less active substance required to achieve the functionality. The durability of the antimicrobial treatment has a strong influence on the potential for release and subsequent environmental effects. In terms of environmental criteria, all compounds were rated similarly in effective removal in wastewater treatment processes. The extent of published information about environmental behavior for each compound varies, limiting the possibility for an in-depth comparison of all textile-relevant parameters across the antimicrobials. Nevertheless the comparative evaluation showed that each antimicrobial technology has specific risks and benefits that should be taken into account in evaluating the suitability of different antimicrobial products. The

  19. 19 CFR 10.25 - Textile components cut to shape in the United States and assembled abroad.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Textile components cut to shape in the United States and assembled abroad. 10.25 Section 10.25 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Articles...

  20. Protective clothing in the sun | Tamas | Nigerian Journal of Clinical ...

    African Journals Online (AJOL)

    Sun protecting clothing is clothing designed for sun protection and is producted from the fabric rated for its level ultraviolet (UV) protection. Some textiles and fabrics emloyed in the use of sun protective clothing may be pre-treated with UV inhibiting ingredients during manufacture to enhance their UV blocking capacitiy.

  1. Design Management in the Textile Industry - A Network Perspective

    DEFF Research Database (Denmark)

    Christensen, Poul Rind; Bang, Anne Louise

    In this paper we explore textile design activities and textile design management from an industrial network perspective. The textile industry is probably one of the most globalized manufacturing industries in the world and thus one of the most dispersed industries on the globe. Most studies...... on design management are framed inside the organisational context of the firm. In this study the role and practice of textile design is addressed in perspective of the global textile production network. The empirical data stems from six case studies exploring how different types of enterprises are organised...

  2. After Three Gorges Dam: What have we learned?

    Science.gov (United States)

    Natali, J.; Williams, P.; Wong, R.; Kondolf, G. M.

    2013-12-01

    reservoir, subsequent floodplain development and degradation of levees increase downstream flood risk. As geomorphic adjustment continues, the loss of key fish and wildlife habitat will rise, a recognized but externalized environmental cost with potential mitigation measures found in protecting and restoring floodplain lakes. With significant underestimates of social impacts and project costs, the population of the surrounding area has experienced severe adverse impacts ranging from loss of ancient villages, landholdings, and livelihoods to increased threats of natural hazards -- without full compensation or public disclosure of project costs. The value of PPAs is most realized when integrated into adaptive management for river basin planning. Throughout the symposium, speakers echoed the conclusion: 'The entire Yangtze basin needs comprehensive management.' Integrated planning decisions must consider dams, water diversions, reservoir management, protection of natural areas, basin-wide land management, preservation of flood detention areas and levees, and both economic compensation and social opportunity for affected residents. The resulting analysis may influence the massive expansion of worldwide hydroelectric development as China exports its financing and dam building expertise.

  3. A ravenous river reclaims its true course: the tale of Marmot Dam''s demise

    Science.gov (United States)

    Noreen Parks; Gordon Grant

    2009-01-01

    Removing dams that are outdated, unsafe, or pose significant economic or environmental costs has emerged in the last 10 years as a major river restoration strategy. The removal of the 45-foot-high Marmot Dam on the Sandy River in 2007 resulted in the biggest sediment release accompanying any dam removal to date. It also provided an unprecedented opportunity...

  4. Patients' attitudes to rubber dam.

    Science.gov (United States)

    Stewardson, D A; McHugh, E S

    2002-10-01

    The aims of this study were to record patients' views of their experience of RD use in an objective manner, and to evaluate the influence of some personal and clinical factors on patients' opinion. A questionnaire was designed which was then distributed to patients receiving dental treatment under RD by (a) final-year dental students at Birmingham Dental School, and (b) general dental practitioners. Patients completed the confidential questionnaire anonymously after treatment, outside the treatment room. After 100 correctly completed forms were collected from group (a) and 106 from group (b), data were entered into a database and subsequently analyzed using SPSS. Analyses were confined to simple cross-tabulations of the patients' responses and potential associated factors, with chi-square analysis and appropriate follow-up comparisons wherever necessary. In both groups, the majority of patients said they would prefer RD to be used at their next appointment, and most had a positive opinion of the experience. No statistically significant association between age, sex, procedure, application time or duration of use and preference for rubber dam was found. Prolonged RD use showed some association with a negative opinion of the experience of RD. Compared with the dentists, students took longer to apply rubber dam and it was in place for longer. Fewer student patients preferred RD next time, and were less positive about its use than the dentists' patients. Further evidence is presented that (i) Patients generally are not averse to RD. (ii) Placement of rubber dam does not take long. (iii) Operator experience improves patient compliance.

  5. Role of alginate in antibacterial finishing of textiles.

    Science.gov (United States)

    Li, Jiwei; He, Jinmei; Huang, Yudong

    2017-01-01

    Antibacterial finishing of textiles has been introduced as a necessary process for various purposes especially creating a fabric with antimicrobial activities. Currently, the textile industry continues to look for textiles antimicrobial finishing process based on sustainable biopolymers from the viewpoints of environmental friendliness, industrialization, and economic concerns. This paper reviews the role of alginate, a sustainable biopolymer, in the development of antimicrobial textiles, including both basic physicochemical properties of alginate such as preparation, chemical structure, molecular weight, solubility, viscosity, and sol-gel transformation property. Then different processing routes (e.g. nanocomposite coating, ionic cross-linking coating, and Layer-by-Layer coating) for the antibacterial finishing of textiles by using alginate are revised in some detail. The achievements in this area have increased our knowledge of alginate application in the field of textile industry and promoted the development of green textile finishing. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. Environmentally friendly antibacterial cotton textiles finished with siloxane sulfopropylbetaine.

    Science.gov (United States)

    Chen, Shiguo; Chen, Shaojun; Jiang, Song; Xiong, Meiling; Luo, Junxuan; Tang, Jiaoning; Ge, Zaochuan

    2011-04-01

    This paper reports a novel environmentally friendly antibacterial cotton textile finished with reactive siloxane sulfopropylbetaine(SSPB). The results show that SSPB can be covalently bound onto the cotton textile surface, imparting perdurable antibacterial activity. The textiles finished with SSPB have been investigated systematically from the mechanical properties, thermal stability, hydrophilic properties and antibacterial properties. It is found that the hydrophilicity and breaking strength are improved greatly after the cotton textiles are finished with SSPB. Additionally, the cotton textiles finished with SSPB exhibit good antibacterial activities against gram-positive bacteria Staphylococcus aureus (S.aureus, ATCC 6538), gram-negative bacteria Escherichia coli (E.coli, 8099) and fungi Candida albicans (C.albicans, ATCC 10231). Moreover, SSPB is nonleachable from the textiles, and it does not induce skin stimulation and is nontoxic to animals. Thus, SSPB is ideal candidate for environmentally friendly antibacterial textile applications. © 2011 American Chemical Society

  7. The future of textile production in high wage countries

    Science.gov (United States)

    Kemper, M.; Gloy, Y.-S.; Gries, T.

    2017-10-01

    It is undisputed that smart production in the context of industry 4.0 offers significant potential for industrial production in Germany. Exploiting this potential provides an opportunity to meet the growing competitive pressure for textile production in high-wage Germany. The complete cross-linking of textile mills towards Textile Production 4.0 means substantial savings. However, currently there are still some challenges that have to be overcome on the long way to Textile Production 4.0. This paper initially reflects the particular challenges of textile production in high-wage Germany. Later, the vision of the future of smart textile production will be outlined. In addition, first pilot solutions and current research approaches which pave the way for Textile Production 4.0 are described.

  8. Study on textile comfort properties of polypropylene blended stainless steel woven fabric for the application of electromagnetic shielding effectiveness

    Science.gov (United States)

    Palanisamy, S.; Tunakova, V.; Karthik, D.; Ali, A.; Militky, J.

    2017-10-01

    In this study, the different proportion of conductive component blended with polypropylene yarn were taken for making conductive textile samples for analysis of electromagnetic shielding effectiveness, fabric bending moment and air permeability. The ASTM D4935 coaxial transmission line method was used to study the electromagnetic shielding. Electromagnetic shielding effectiveness of textile structures containing different percentage of metal content ranges from 1 to 50 dB at high frequency range. Breathability of structures, more precisely air permeability was considered as one of important parameters for designing of electromagnetic radiation protective fabrics for certain applications. The bending moment of samples is decreases with increasing metal component percent.

  9. Environmental Assessment of Textile Material Recovery Techniques : Examining Textile Flows in Sweden

    OpenAIRE

    Youhanan, Lena

    2013-01-01

    The production of textiles, focusing on cotton and polyester, carries with it major environmental concerns such as significant water and chemical use as well as the use of non-renewable resources. Measures need to be taken to decrease those environmental burdens. The present study investigates four different recovery techniques in terms of specific environmental factors. The investigated recovery methods are the Re:newcell method, polyester recycling, textile to insulation material and biogas...

  10. Safety Aspects of Sustainable Storage Dams and Earthquake Safety of Existing Dams

    Directory of Open Access Journals (Sweden)

    Martin Wieland

    2016-09-01

    Full Text Available The basic element in any sustainable dam project is safety, which includes the following safety elements: ① structural safety, ② dam safety monitoring, ③ operational safety and maintenance, and ④ emergency planning. Long-term safety primarily includes the analysis of all hazards affecting the project; that is, hazards from the natural environment, hazards from the man-made environment, and project-specific and site-specific hazards. The special features of the seismic safety of dams are discussed. Large dams were the first structures to be systematically designed against earthquakes, starting in the 1930s. However, the seismic safety of older dams is unknown, as most were designed using seismic design criteria and methods of dynamic analysis that are considered obsolete today. Therefore, we need to reevaluate the seismic safety of existing dams based on current state-of-the-art practices and rehabilitate deficient dams. For large dams, a site-specific seismic hazard analysis is usually recommended. Today, large dams and the safety-relevant elements used for controlling the reservoir after a strong earthquake must be able to withstand the ground motions of a safety evaluation earthquake. The ground motion parameters can be determined either by a probabilistic or a deterministic seismic hazard analysis. During strong earthquakes, inelastic deformations may occur in a dam; therefore, the seismic analysis has to be carried out in the time domain. Furthermore, earthquakes create multiple seismic hazards for dams such as ground shaking, fault movements, mass movements, and others. The ground motions needed by the dam engineer are not real earthquake ground motions but models of the ground motion, which allow the safe design of dams. It must also be kept in mind that dam safety evaluations must be carried out several times during the long life of large storage dams. These features are discussed in this paper.

  11. Key Impact Factors on Dam Break Fatalities

    Science.gov (United States)

    Huang, D.; Yu, Z.; Song, Y.; Han, D.; Li, Y.

    2016-12-01

    Dam failures can lead to catastrophes on human society. However, there is a lack of research about dam break fatalities, especially on the key factors that affect fatalities. Based on the analysis of historical dam break cases, most studies have used the regression analysis to explore the correlation between those factors and fatalities, but without implementing optimization to find the dominating factors. In order to understand and reduce the risk of fatalities, this study has proposed a new method to select the impact factors on the fatality. It employs an improved ANN (Artificial Neural Network) combined with LOOCV (Leave-one-out cross-validation) and SFS (Stepwise Forward Selection) approach to explore the nonlinear relationship between impact factors and life losses. It not only considers the factors that have been widely used in the literature but also introduces new factors closely involved with fatalities. Dam break cases occurred in China from 1954 to 2013 are summarized, within which twenty-five cases are selected with a comprehensive coverage of geographic position and temporal variation. Twelve impact factors are taken into account as the inputs, i.e., severity of dam break flood (SF), population at risk (PR), public understanding of dam break (UB), warning time (TW), evacuation condition (EC), weather condition during dam break (WB), dam break mode (MB), water storage (SW), building vulnerability (VB), dam break time (TB), average distance from the affected area to the dam (DD) and preventive measures by government (PG).From those, three key factors of SF, MB and TB are chosen. The proposed method is able to extract the key factors, and the derived fatality model performs well in various types of dam break conditions.

  12. Geo textiles and related products used in the waterproofing of reservoirs. Situation in Morocco; Geotextiles y productos relacionados utilizados en la impermeabilizacion de balsas. Situacion en Marruecos

    Energy Technology Data Exchange (ETDEWEB)

    Leiro Lopez, A.; Mateo Sanz, B.

    2015-07-01

    The aim of this paper is to describe the geo textiles, and products related to geo textiles, used for the building of water-storage reservoirs, which can be applicable to the construction of this kind of structures in Morocco. It presents different types of geo textiles and related products most commonly used in reservoirs, such as geo nets, geo grids, geo mats and geo composites, describing their characteristics and experimental methodology. Furthermore, and drawing on the Spanish Manual for Design, Construction, Operation and Maintenance of Reservoirs, emphasis is placed on the functions that geo synthetics can perform, such as protection and filter in the case of geo textiles, and drainage in the case of geo nets and draining composites. Finally, several works of this sort of structures located in Morocco are cited. (Author)

  13. Three-Dimensional Printed Thermal Regulation Textiles.

    Science.gov (United States)

    Gao, Tingting; Yang, Zhi; Chen, Chaoji; Li, Yiju; Fu, Kun; Dai, Jiaqi; Hitz, Emily M; Xie, Hua; Liu, Boyang; Song, Jianwei; Yang, Bao; Hu, Liangbing

    2017-11-01

    Space cooling is a predominant part of energy consumption in people's daily life. Although cooling the whole building is an effective way to provide personal comfort in hot weather, it is energy-consuming and high-cost. Personal cooling technology, being able to provide personal thermal comfort by directing local heat to the thermally regulated environment, has been regarded as one of the most promising technologies for cooling energy and cost savings. Here, we demonstrate a personal thermal regulated textile using thermally conductive and highly aligned boron nitride (BN)/poly(vinyl alcohol) (PVA) composite (denoted as a-BN/PVA) fibers to improve the thermal transport properties of textiles for personal cooling. The a-BN/PVA composite fibers are fabricated through a fast and scalable three-dimensional (3D) printing method. Uniform dispersion and high alignment of BN nanosheets (BNNSs) can be achieved during the processing of fiber fabrication, leading to a combination of high mechanical strength (355 MPa) and favorable heat dispersion. Due to the improved thermal transport property imparted by the thermally conductive and highly aligned BNNSs, better cooling effect (55% improvement over the commercial cotton fiber) can be realized in the a-BN/PVA textile. The wearable a-BN/PVA textiles containing the 3D-printed a-BN/PVA fibers offer a promising selection for meeting the personal cooling requirement, which can significantly reduce the energy consumption and cost for cooling the whole building.

  14. Textile wastewater biocoagulation by Caesalpinia spinosa extracts

    Directory of Open Access Journals (Sweden)

    Andrés Revelo

    2015-03-01

    Full Text Available (Received: 2014/12/06 - Accepted: 2015/03/24The textile industry in Ecuador is still a matter of concern because of the inappropriate disposal of their effluents into the local water supply. The present research was carried out in Pelileo (Tungurahua-Ecuador where textile wastewaters are discharged into waterways. An environmentally friendly solution to treat highly contaminated organic textile wastewaters is herein evaluated: a remediation process of biocoagulation was performed using extracts from the Caesalpinia spinosa plant also known as guarango or tara. It was determined that using C. spinosa extracts to treat wastewater has the same statistical effect as when applying a chemical coagulant (polyaluminum chloride 15%. Activated zeolite adsorbed color residuals from treated water to obtain turbidity removal more than 90%. A mathematical model showed that turbidity removal between 50-90% can be obtained by applying 25-45 g/L of guarango extracts and zeolite per 700 mL of textile wastewater. The natural coagulation using C. spinosa extracts produced 85% less sludge than polyaluminum chloride, and removed high organic matter content in the wastewater (1050 mg/L by 52%.

  15. COLOR POLLUTION CONTROL IN TEXTILE DYEING INDUSTRY ...

    African Journals Online (AJOL)

    a

    E-mail: ssreedharreddy@yahoo.com. COLOR POLLUTION CONTROL IN TEXTILE DYEING INDUSTRY EFFLUENTS. USING TANNERY SLUDGE DERIVED ACTIVATED CARBON. Sajjala Sreedhar Reddy1∗, Bijjam Kotaiah2 and Nanaga Siva Prasad Reddy3. 1Adama University, Faculty of Technology, Post Box No. 1888 ...

  16. Robust fabric substrates for photonic textile applications

    NARCIS (Netherlands)

    Van Pieterson, L.; Bouten, P.C.P.; Kriege, J.C.; Bhattacharya, R.

    2010-01-01

    A fabric substrate is described for electronic textile with robust interwoven connections between the conductive yarns in it. The fabric's robustness, as a function of the electrical reliability of its conductive yarn connections, is shown to hold over large deformations.This fabric is then used to

  17. Strain mapping analysis of textile composites

    NARCIS (Netherlands)

    Ivanov, Dimitry; Ivanov, S.; Lomov, Stepan; Verpoest, Ignaas

    2009-01-01

    The focus of the work is meso-scale analysis (scale level of the fabric unit cell) of textile composite deformation and failure. The surface strain measurement is used for: (1) experimental investigation, which includes study of strain distribution at various stages of deformation, plasticity

  18. Masters and Apprentices of Textile Craft

    Directory of Open Access Journals (Sweden)

    Annelie Holmberg

    2013-10-01

    Full Text Available This article describes how the craftsmen at the workroom at Handarbetets vänner, Stockholm, learned their craft skills during the years 1948‒2012. What this knowledge consisted of and how the apprentices’ knowledge grows into skillfulness. Interviews with 15 weavers and embroiderers who have worked during the time period form the empirical material. The period of time was chosen according to the informants´ times of employment.The strategies for learning are affected by dialogue between the craftsmen, both a verbal and a silent dialogue. The dialogue is an important part of the learning even though the making is central. The workroom forms its own way of making textile art, a way of doing that is learned from master to apprentice. In this situated knowledge, the different masters have their own ways of for instance mixing color and material, all corresponding with core values. The learning is also affected by the artistic leader and the artist.The learning within the workroom occurs in the making of objects, but never at the cost of the quality of the objects. The core values of the establishments, and the fact that there is a strive to be profitable, makes the circumstances. The collaboration with the artist in creating unique textile art is the primary goal; the learning is something that is taken for granted in order to withhold the competence in the establishment.Keywords: textile craft, master and apprentice, craftsmen, textile art, workroom

  19. Contactless EMG sensors embroidered into textile

    OpenAIRE

    Linz, Torsten; Gourmelon, L.; Langereis, G.

    2007-01-01

    To obtain maximum unobtrusiveness with sensors for monitoring health parameters on the human body, two technical solutions are combined. First we propose contactless sensors for capacitive electromyography measurements. Secondly, the sensors are integrated into textile, so complete fusion with a wearable garment is enabled. We are presenting the first successful measurements with such sensors.

  20. Textile finishing chemicals: an industrial guide

    National Research Council Canada - National Science Library

    Flick, Ernest W

    1990-01-01

    ..., hand modifiers, antistatic agents, biocides, fixatives, scouring agents, leveling agents, dispersants, defoamers, anticracking agents, binders, lubricating agents, stiffeners, and sequestering agents. The chemicals may constitute a substantial portion of the finished textile. In many cases 10% or more of the fabric's final weight may derive fro...

  1. State Skill Standards: Fashion, Textiles and Design

    Science.gov (United States)

    Campbell, Rene Crepaldi; Gaudy, Glenna; Green-Jobe, Victoria; Hatch, Susan; Moen, Julianne; Sheldon, Shannon; Smith, Loree; Chessell, Karen

    2008-01-01

    The mission of Fashion, Textiles and Design Education is to prepare students for family and community life and careers in the fashion industry by creating opportunities to develop the knowledge, skills, attitudes and behaviors needed to: (1) Examine skills needed to effectively manage clothing decisions; (2) Evaluate the use, care and production…

  2. Microbial degradation of textile industrial effluents | Palamthodi ...

    African Journals Online (AJOL)

    In this work, the in situ degradation of textile industrial effluent was carried out. The degradation of two different dyes, blue and green colour has ... The degradation of dye was confirmed via the decolourisation assay and by the measurement of COD and BOD values. A trickling bed reactor was designed and the treatment of ...

  3. Biotechnology In The Mauritian Textile Industry | Kistamah ...

    African Journals Online (AJOL)

    University of Mauritius Research Journal. Journal Home · ABOUT · Advanced Search · Current Issue · Archives · Journal Home > Vol 1 (1998) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Biotechnology In The Mauritian Textile Industry. N Kistamah, S Rosunee ...

  4. Friction in textile thermoplastic composites forming

    NARCIS (Netherlands)

    Akkerman, Remko; ten Thije, R.H.W.; Sachs, Ulrich; de Rooij, Matthias B.; Binetruy, C.; Boussu, F.

    2010-01-01

    A previously developed mesoscopic friction model for glass/PP textile composite laminates during forming is evaluated for glass and carbon/PPS laminates, at higher temperatures and lower viscosities than before. Experiments were performed for tool/ply and ply/ply configurations in a new friction

  5. Recycling of textiles: the South African scene *

    African Journals Online (AJOL)

    Seugnet

    image of plastics, 1992). Larney et al (1996) recommended that a study should be undertaken to assess the situation regarding the recycling of textiles in South Africa, a study that they undertook shortly afterwards. This study is reported in this article. OBJECTIVES. The specific objectives of the study were to investigate.

  6. McNary Dam, Ice Harbor Dam, and Lower Monumental Dam Smolt Monitoring Program; 1996 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Hillson, Todd; Lind, Sharon; Price, William (Washington Department of Fish and Wildlife, Olympia, WA)

    1997-07-01

    The Washington Department of Fish & Wildlife (WDFW) assumed responsibility for the Smolt Monitoring Program at McNary Dam on the Columbia River in 1990 and at the new juvenile collection facility at Lower Monumental Dam on the Snake River in 1993. In 1996, Smolt Monitoring Program activities also began at the new juvenile collection facility located at Ice Harbor Dam. This report summarizes the 1996 Smolt Monitoring work at all three sites. The work at Ice Harbor consisted of Gas Bubble Trauma (GBT) monitoring only. In general, the 1996 passage season at both the McNary and Lower Monumental sites can be characterized by reduced passage of juveniles through the collection systems due to elevated river flows and spill, and low (<1%) overall facility mortality rates most likely resulting from cooler water temperatures. In accordance with the National Marine Fisheries Service recommendations (NMFS, 1995) all spring migrants were bypassed at McNary Dam in 1996. Mechanical problems within the McNary collection system resulted in collection and sampling activities being delayed until April 18 at this site, while sampling and collection began on the scheduled starting date of April 1 at Lower Monumental Dam. Monitoring operations were conducted through December 14 at McNary Dam and through October 28 at Lower Monumental Dam. An ongoing transportation evaluation summer migrant marking program was conducted at McNary Dam in 1996 by the NMFS. This necessitated the sampling of 394,211 additional fish beyond the recommended sampling guidelines. All total, 509,237 and 31,219 juvenile salmonids were anesthetized and individually counted, examined for scale loss, injuries, and brands by WDFW Smolt Monitoring personnel in 1996 at McNary Dam and Lower Monumental Dam, respectively.

  7. SUITABILITY OF DAM SITES IN MAURITIUS

    African Journals Online (AJOL)

    cistvr

    Sites where dams/reservoirs have been proposed in Mauritius are listed in Table 1. In many of these places, detailed investigations have been carried out, only to be shelved for some reason or other. Other dams have been constructed, sometimes after a sketchy desk study investigation, simply because of the urgency of ...

  8. 75 FR 62024 - Metal and Nonmetal Dams

    Science.gov (United States)

    2010-10-07

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Mine Safety and Health Administration 30 CFR Parts 56 and 57 RIN 1219-AB70 Metal and Nonmetal Dams AGENCY... measures to assure that metal and nonmetal mine operators design, construct, operate and maintain dams in a...

  9. SEDIMENT MANAGEMENT IN FLOOD CONTROL DAMS

    OpenAIRE

    Pattanapanchai, Maneechit; Shah, Farhed A.; Annandale, George

    2002-01-01

    Reservoir sedimentation reduces economic value and longevity of flood control dams. Periodic sediment removal allows extension of reservoir life. An optimal control model is developed to evaluate alternative sediment management strategies for flood control dams. An illustrative empirical analysis shows that sustainable management is economically desirable for a wide range of parameter values.

  10. ACHIEVEMENT OF THE HIGHEST LEVEL OF SAFETY AND HEALTH AT WORK AND THE SATISFACTION OF EMPLOYEES IN THE TEXTILE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Snezana Urosevic

    2016-12-01

    Full Text Available Safety and health at work involves the exercise of such working conditions that take certain measures and activities in order to protect the life and health of employees. The interest of society, of all stakeholders and every individual is to achieve the highest level of safety and health at work, to unwanted consequences such as injuries, occupational diseases and diseases related to work are reduced to a minimum, and to create the conditions work in which employees have a sense of satisfaction in the performance of their professional duties. Textile industry is a sector with higher risk, because the plants of textile industry prevailing unfavorable microclimate conditions: high air temperature and high humidity, and often insufficient illumination of rooms and increased noise. The whole line of production in the textile industry, there is a risk of injury, the most common with mechanical force, or gaining burns from heat or chemicals. All of these factors are present in the process of production and processing of textiles and the same may affect the incidence of occupational diseases of workers, absenteeism, reduction of their working capacity and productivity. With the progress of the textile industry production increases in the number of hazardous and harmful substances that may pose a potential danger to the employee in this branch of the economy as well as the harmful impact on the environment. Therefore, it is important to give special attention to these problems.

  11. Status and Habitat Requirements of White Sturgeon Populations in the Columbia River Downstream from McNary Dam, 1989-1990 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Nigro, Anthony A. (Oregon Department of Fish and Wildlife, Portland, OR)

    1990-09-01

    We report on our progress from April 1989 through March 1990 on determining the status and habitat requirements of white sturgeon populations in the Columbia River downstream from McNary Dam. The study is a cooperative effort by the Oregon Department of Fish and Wildlife (ODFW), Washington Department of Fisheries (WDF), US Fish and Wildlife Service (FWS) and National Marine Fisheries Service (NMFS). Study objectives addressed by each agency are to describe the life history and population dynamics of subadults and adults between Bonneville and McNary dams and evaluate the need and identify potential methods for protecting, mitigating and enhancing populations downstream from McNary Dam, to describe the white sturgeon recreational fishery between Bonneville and McNary dams, describe reproductive and early life history characteristics downstream from Bonneville Dam and describe life history and population dynamics of subadults and adults downstream from Bonneville Dam, to describe reproduction and early life history characteristics, define habitat requirements for spawning and rearing and quantify extent of habitat available between Bonneville and McNary dams, and to describe reproduction and early life history characteristics, define habitat requirements for spawning and rearing and quantify extent of habitat available downstream from Bonneville Dam. Our approach is to work concurrently downstream and upstream from Bonneville Dam. Upstream from Bonneville Dam we began work in the Dalles Reservoir in 1987 and expanded efforts to Bonneville Reservoir in 1988 and John Day Reservoir in 1989. Highlights from this work is also included. 47 refs., 33 figs., 66 tabs.

  12. Restoring Environmental Flows by Modifying Dam Operations

    Directory of Open Access Journals (Sweden)

    Brian D. Richter

    2007-06-01

    Full Text Available The construction of new dams has become one of the most controversial issues in global efforts to alleviate poverty, improve human health, and strengthen regional economies. Unfortunately, this controversy has overshadowed the tremendous opportunity that exists for modifying the operations of existing dams to recover many of the environmental and social benefits of healthy ecosystems that have been compromised by present modes of dam operation. The potential benefits of dam "re-operation" include recovery of fish, shellfish, and other wildlife populations valued both commercially and recreationally, including estuarine species; reactivation of the flood storage and water purification benefits that occur when floods are allowed to flow into floodplain forests and wetlands; regaining some semblance of the naturally dynamic balance between river erosion and sedimentation that shapes physical habitat complexity, and arresting problems associated with geomorphic imbalances; cultural and spiritual uses of rivers; and many other socially valued products and services. This paper describes an assessment framework that can be used to evaluate the benefits that might be restored through dam re-operation. Assessing the potential benefits of dam re-operation begins by characterizing the dam's effects on the river flow regime, and formulating hypotheses about the ecological and social benefits that might be restored by releasing water from the dam in a manner that more closely resembles natural flow patterns. These hypotheses can be tested by implementing a re-operation plan, tracking the response of the ecosystem, and continually refining dam operations through adaptive management. The paper highlights a number of land and water management strategies useful in implementing a dam re-operation plan, with reference to a variety of management contexts ranging from individual dams to cascades of dams along a river to regional energy grids. Because many of the

  13. Research progress on dam-break floods

    KAUST Repository

    Wu, Jiansong

    2011-08-01

    Because of the catastrophic effects downstream of dam-break failure, more and more researchers around the world have been working on the study of dam-break flows to accurately forecast the downstream inundation mapping. With the rapid development of computer hardware and computing techniques, numerical study on dam-break flows has been a popular research subject. In the paper, the numerical methodologies used to solve the governing partial differential equations of dam-break flows are classified and summarized, and their characteristics and applications are discussed respectively. Furthermore, the fully-developed mathematical models developed in recent decades are reviewed, and also introduced the authors\\' on-going work. Finally, some possible future developments on modeling the dam-break flows and some solutions are presented and discussed. © 2011 IEEE.

  14. Determination of metals in water from Billings dam, Sao Paulo

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Talita; Sarkis, Jorge E.S.; Ulrich, Joao C.; Yamaguishi, Renata Bazante, E-mail: taoliveira@ipen.br, E-mail: jesarkis@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Menezes, Luciana Carvalho Bezerra de; Castro, Paula Maria Genova de; Monteiro Junior, Adalberto Jose; Maruyama, Lidia Sumile, E-mail: lcbm@usp.br [Instituto de Pesca, (IP/SAA-SP), Sao Paulo, SP (Brazil). Secretaria da Agricultura e Abastecimento do Estado de Sao Paulo

    2013-07-01

    The Billings reservoir, located in Sao Paulo, Brazil, is used for several purposes such as: water supply, electric generation, fishing and leisure. Although considered an area of environmental protection, in recent years the dam has suffered diverse environmental aggressions including the release of toxic metals. This study presents a recent evaluation of metal contents along the Dam. Samples were collected every three months during the period of winter 2009 to summer 2010. Samples were collected in thirteen points along of the dam, as follows: Rio dos Porcos (Point 1), Summit Control (Point 2), Ilha do Bigua (Point 3), Casa Caida (Point 4), Barragem (Point 5), Foz de Taquacetuba (Point 6), Braco Borore (Point 7), Foz de Borore (Point 8), Alvarenga (Point 9), Pedreira (Point 10), Borore's Margin (Point 11), Capivari I's Margin (Point 12) and Capivari II's Margin (Point 13). The determination of Al, Cd, Cr, Cu, Fe, Mg, Mn, Ni, Pb and Zn was performed by using high resolution inductively coupled plasma mass spectrometer (HR-ICPMS). The methodology has been validated using certified reference material Riverine Water Reference Material for Trace Metals provided by National Research Council Canada (NRCC). The sampling points located in the Pedreira, Borore's Margin, Alvarenga, Barragem Taquacetuba, Casa Caida e Ilha do Bigua presented the highest concentrations. The level for Fe, Cu and Ni were higher than the ones reported in the literature and above the limit set by CONAMA 2914/201. (author)

  15. Do we need construct more dams?

    Science.gov (United States)

    Chen, J.; Shi, H.

    2013-12-01

    This paper reviews global dam development in association with the growths of global population, economy, and energy consumption in the past several decades, and also evaluates contributions of dam development to future world sustainable development. Eventually, this paper answers whether we need more dams in the future or not. The world population has rapidly increased from 1.6 billion in 1900, 2.5 billion in 1950, 6.1 billion in 2000, to 7.0 billion in 2011, and is projected to reach 9.5 billion in 2050; similarly, the world economy has dramatically expanded. To maintain socioeconomic development, the consumption of water, food and energy has increased rapidly as well. However, the total volume of available water resource over the world is limited, the food production largely depends on water supply, and the main energy sources are still oil, coal and gas at present, which are regarded as non-renewable resources. Accordingly, it is expected that we will face serious problems to deal with the challenges of water crisis, food security and energy shortage in the near future. In order to enhance the capability of regulating water resource, a great number of global dams (and related reservoirs) have been constructed in the last one hundred years; currently, almost all large rivers over the world have been regulated by dams. The reservoirs can supply sufficient water for irrigated land to ensure food production, and the associated hydropower stations can generate electricity. This article collects the dam data from the ICOLD (International Commission on Large Dams) and GRanD (Global Reservoir and Dam) databases, and some socioeconomic data, including population, economy, and consumptions of water, food and energy over the world. Analysis of these data reveals that global dam development has a great impact on the world sustainable development. Further, it is concluded that we need further dam development to maintain our future development.

  16. The strengthening of the Lavaud-Gelade dam; Le confortement de la digue de Lavaud-Gelade

    Energy Technology Data Exchange (ETDEWEB)

    Devos, J.C. [IDTPE, Direction Regionale de l`Industrie, de la Recherche et de l`Environnement (DRIRE), (France); Legras, F. [ITPE, (France)

    1996-12-31

    The Lavaud-Gelade dam (Creuse, France) was built in 1931 and operated by Electricite de France (EdF) since 1946. It is made of loam (clay and sand) with a stone protective cover. The progressive increase of leaks which started in 1982 has led to a project of strengthening of the dam which is detailed in this paper (conclusion of the safety studies, works and costs). The surveillance system has been modified and improved too. (J.S.)

  17. Simulated effects of dam removal on water temperatures along the Klamath River, Oregon and California, using 2010 Biological Opinion flow requirements

    Science.gov (United States)

    Risley, John C.; Brewer, Scott J.; Perry, Russell W.

    2012-01-01

    Computer model simulations were run to determine the effects of dam removal on water temperatures along the Klamath River, located in south-central Oregon and northern California, using flow requirements defined in the 2010 Biological Opinion of the National Marine Fisheries Service. A one-dimensional, daily averaged water temperature model (River Basin Model-10) developed by the U.S. Environmental Protection Agency Region 10, Seattle, Washington, was used in the analysis. This model had earlier been configured and calibrated for the Klamath River by the U.S. Geological Survey for the U.S. Department of the Interior, Klamath Secretarial Determination to simulate the effects of dam removal on water temperatures for current (2011) and future climate change scenarios. The analysis for this report was performed outside of the scope of the Klamath Secretarial Determination process at the request of the Bureau of Reclamation Technical Services Office, Denver, Colorado.For this analysis, two dam scenarios were simulated: “dams in” and “dams out.” In the “dams in” scenario, existing dams in the Klamath River were kept in place. In the “dams out” scenario, the river was modeled as a natural stream, without the J.C. Boyle, Copco1, Copco2, and Iron Gate Dams, for the entire simulation period. Output from the two dam scenario simulations included daily water temperatures simulated at 29 locations for a 50-year period along the Klamath River between river mile 253 (downstream of Link River Dam) and the Pacific Ocean. Both simulations used identical flow requirements, formulated in the 2010 Biological Opinion, and identical climate conditions based on the period 1961–2009.Simulated water temperatures from January through June at almost all locations between J.C. Boyle Reservoir and the Pacific Ocean were higher for the “dams out” scenario than for the “dams in” scenario. The simulated mean monthly water temperature increase was highest [1.7–2

  18. Cellulose/inorganic-composite fibers for producing textile fabrics of high X-ray absorption properties

    Energy Technology Data Exchange (ETDEWEB)

    Günther, Karoline; Giebing, Christina; Askani, Antonia [FTB, Hochschule Niederrhein – University of Applied Science, Faculty of Textile and Clothing Technology, Webschulstr. 31, 41065 Mönchengladbach (Germany); Leisegang, Tilmann [Saxray GmbH, Maria-Reiche-Str. 1, 01109 Dresden (Germany); Krieg, Marcus [TITK, Thüringisches Institut für Textil- und Kunststoff-Forschung e.V., Breitscheidstraße 97, 07407 Rudolstadt (Germany); Kyosev, Yordan; Weide, Thomas [FTB, Hochschule Niederrhein – University of Applied Science, Faculty of Textile and Clothing Technology, Webschulstr. 31, 41065 Mönchengladbach (Germany); Mahltig, Boris, E-mail: Boris.Mahltig@hs-niederrhein.de [FTB, Hochschule Niederrhein – University of Applied Science, Faculty of Textile and Clothing Technology, Webschulstr. 31, 41065 Mönchengladbach (Germany)

    2015-11-01

    fibers with high content of inorganic X-ray absorbers. • Realization of textile fabrics for X-ray protective applications. • Combination of textile properties and X-ray protection in one material.

  19. TYPOLOGY OF LARGE DAMS. A REVIEW

    Directory of Open Access Journals (Sweden)

    Gheorghe ROMANESCU

    2015-06-01

    Full Text Available The dams represent hydrotechnical constructions meant to ensure a judicious use of water resources. The international literature is extremely rich in data regarding the large dams on Earth. In this context, a hierarchy of the main dams is attempted and the role they play in the economic development of the regions they were built in is underlined. The largest dams are built on the big rivers in Asia, North America, South America and Africa. The reservoirs have multiple roles: electricity production, drinking or industrial water supply, irrigations, recreation, etc. High costs and land fragility do not allow the construction of dams in the places most affected by drought or flood. This is why they are usually built in mountainous areas, at great distance from the populated centres. On the Romanian territory, there are 246 large dams, built in the hydrographical basins of Siret, Olt, Arges, Somes, etc. The largest rivers on Earth, by discharge, (Amazon and Zair do not also include the largest dams because the landform and the type of flow have not allowed such constructions.

  20. Grand Coulee Dam Wildlife Mitigation Program : Pygmy Rabbit Programmatic Management Plan, Douglas County, Washington.

    Energy Technology Data Exchange (ETDEWEB)

    Ashley, Paul

    1992-06-01

    The Northwest Power Planning Council and the Bonneville Power Administration approved the pygmy rabbit project as partial mitigation for impacts caused by the construction of Grand Coulee Dam. The focus of this project is the protection and enhancement of shrub-steppe/pygmy rabbit habitat in northeastern Washington.

  1. Characterization of textile electrodes and conductors using standardized measurement setups.

    Science.gov (United States)

    Beckmann, L; Neuhaus, C; Medrano, G; Jungbecker, N; Walter, M; Gries, T; Leonhardt, S

    2010-02-01

    Textile electrodes and conductors are being developed and used in different monitoring scenarios, such as ECG or bioimpedance spectroscopy measurements. Compared to standard materials, conductive textile materials offer improved wearing comfort and enable long-term measurements. Unfortunately, the development and investigation of such materials often suffers from the non-reproducibility of the test scenarios. For example, the materials are generally tested on human skin which is difficult since the properties of human skin differ for each person and can change within hours. This study presents two test setups which offer reproducible measurement procedures for the systematic analysis of textile electrodes and conductors. The electrode test setup was designed with a special skin dummy which allows investigation of not only the electrical properties of textile electrodes but also the contact behavior between electrode and skin. Using both test setups, eight textile electrodes and five textile conductors were analyzed and compared.

  2. Stretchable biofuel cell with enzyme-modified conductive textiles.

    Science.gov (United States)

    Ogawa, Yudai; Takai, Yuki; Kato, Yuto; Kai, Hiroyuki; Miyake, Takeo; Nishizawa, Matsuhiko

    2015-12-15

    A sheet-type, stretchable biofuel cell was developed by laminating three components: a bioanode textile for fructose oxidation, a hydrogel sheet containing fructose as fuel, and a gas-diffusion biocathode textile for oxygen reduction. The anode and cathode textiles were prepared by modifying carbon nanotube (CNT)-decorated stretchable textiles with fructose dehydrogenase (FDH) and bilirubin oxidase (BOD), respectively. Enzymatic reaction currents of anode and cathode textiles were stable for 30 cycles of 50% stretching, with initial loss of 20-30% in the first few cycles due to the partial breaking of the CNT network at the junction of textile fibers. The assembled laminate biofuel cell showed power of ~0.2 mW/cm(2) with 1.2 kΩ load, which was stable even at stretched, twisted, and wrapped forms. Copyright © 2015 Elsevier B.V. All rights reserved.

  3. Health and safety aspects of textile workers from Solapur (India textile industries

    Directory of Open Access Journals (Sweden)

    Rahul B Hiremath

    2014-12-01

    Full Text Available Introduction: Textile sector in India plays an important role in the country's economy, providing employment to a significant population in rural and urban areas. Objectives: This paper focuses on health and safety aspects of textile workers in Solapur City (one of the key textile cluster in the state of Maharashtra, India. Methodology: A sample of 180 workers from the identified textile industries of Solapur city were assessed for their general physique, muscle tone, lung condition, and eyesight using different techniques. The study aimed at developing a framework for understanding risks to textile workers resulting from lack of health and safety standards in companies. Results: Findings showed that most of the workers have been affected by respiratory problems, increase in muscle tone, eye problems and musculoskeletal problem. It has been also observed that job security or regular work impacts positively to the worker’s long term body health. However, there is an immediate need to adopt and implement measures in accordance with Indian Factories Act (OHSAS 18001/ILO-OSH 2001 which includes directions and procedures in respect of industrial installations, work environment and occupational health and safety guidelines.

  4. National Dam Inspection Program. SCS PA 477 (NDS I.D. Number PA 00720, DER I.D. Number 6-457), Delaware River Basin, Tributary of Mill Creek. Berks County, Pennsylvania. Phase I Inspection Report,

    Science.gov (United States)

    1980-01-01

    is one of three dams built on the Kaercher Creek Watershed to provide flood protection to the Borough of Hamburg. 2 g. Design and Construction History...two single-purpose flood control dams and one multi-purpose dam which form the protection for the Kaercher Creek Watershed. Congress approved the...P1A""S - - _ _ 13 %;t- SCALE -r. KAERCHER CREEK WATERSHED PROJE FLOODWATER RETARDING DAM PA-47? AL 191(1- OFfitSERKS COUNTY,. PENNSYLVANA *1 tw( i

  5. Textile-based sampling for potentiometric determination of ions.

    Science.gov (United States)

    Lisak, Grzegorz; Arnebrant, Thomas; Ruzgas, Tautgirdas; Bobacka, Johan

    2015-06-02

    Potentiometric sensing utilizing textile-based micro-volume sampling was applied and evaluated for the determination of clinically (Na(+), K(+), Cl(-)) and environmentally (Cd(2+), Pb(2+) and pH) relevant analytes. In this technological design, calibration solutions and samples were absorbed into textiles while the potentiometric cells (ion-selective electrodes and reference electrode) were pressed against the textile. Once the liquid, by wicking action, reached the place where the potentiometric cell was pressed onto the textile, hence closing the electric circuit, the potentiometric response was obtained. Cotton, polyamide, polyester and their blends with elastane were applied for micro-volume sampling. The textiles were found to influence the determination of pH in environmental samples with pH close to neutral and Pb(2+) at low analyte concentrations. On the other hand, textile-based micro-volume sampling was successfully applied in measurements of Na(+) using solid-contact sodium-selective electrodes utilizing all the investigated textiles for sampling. It was found that in order to extend the application of textile-based sampling toward environmental analysis of ions it will be necessary to tailor the physio-chemical properties of the textile materials. In general, textile-based sampling opens new possibilities for direct chemical analysis of small-volume samples and provide a simple and low-cost method to screen various textiles for their effects on samples to identify which textiles are the most suitable for on-body sensing. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. Bacterial Growth on Chitosan-Coated Polypropylene Textile

    OpenAIRE

    D. Erben; V. Hola; J. Jaros; J. Rahel

    2012-01-01

    Biofouling is a problem common in all systems where microorganisms and aqueous environment meet. Prevention of biofouling is therefore important in many industrial processes. The aim of this study was to develop a method to evaluate the ability of material coating to inhibit biofilm formation. Chitosan-coated polypropylene nonwoven textile was prepared using dielectric barrier discharge plasma activation. Resistance of the textile to biofouling was then tested. First, the textile was submerge...

  7. Geophysics Methods in Electrometric Assessment of Dams

    Energy Technology Data Exchange (ETDEWEB)

    Davydov, V. A., E-mail: davydov-va@yandex.ru; Baidikov, S. V., E-mail: badikek@mail.ru; Gorshkov, V. Yu., E-mail: vitalaa@yandex.ru; Malikov, A. V., E-mail: alex.mal.1986@mail.ru [Russian Academy of Sciences, Geophysical Institute, Ural Branch (Russian Federation)

    2016-07-15

    The safety assessment of hydraulic structures is proposed to be conducted via geoelectric measurements, which are capable of assessing the health of earth dams in their natural bedding without intervention in their structure. Geoelectric measurements are shown as being capable of pinpointing hazardous parts of a dam, including areas of elevated seepage. Applications of such methods are shown for a number of mini-dams in the Sverdlovsk region. Aparameter (effective longitudinal conductivity) that may be used to monitor the safety of hydraulic structures is proposed. Quantitative estimates of this parameter are given in terms of the degree of safely.

  8. Sustainability of dams-an evaluation approach

    Science.gov (United States)

    Petersson, E.

    2003-04-01

    Situated in the stream bed of a river, dams and reservoirs interrupt the natural hydrological cycle. They are very sensitive to all kinds of changes in the catchment, among others global impacts on land use, climate, settlement structures or living standards. Vice versa dams strongly affect the spatially distributed, complex system of ecology, economy and society in the catchment both up- and downstream of the reservoir. The occurrence of negative impacts due to large dams led to serious conflicts about future dams. Nevertheless, water shortages due to climatic conditions and their changes, that are faced by enormous water and energy demands due to rising living standards of a growing world population, seem to require further dam construction, even if both supply and demand management are optimised. Although environmental impact assessments are compulsory for dams financed by any of the international funding agencies, it has to be assumed that the projects lack sustainability. Starting from an inventory of today's environmental impact assessments as an integral part of a feasibility study the presentation will identify their inadequacies with regard to the sustainability of dams. To improve the sustainability of future dams and avoid the mistakes of the past, the planning procedures for dams have to be adapted. The highly complex and dynamical system of interrelated physical and non-physical processes, that involves many different groups of stakeholders, constitutes the need for a model-oriented decision support system. In line with the report of the World Commission of Dams an integrated analysis and structure of the complex interrelations between dams, ecology, economy and society will be presented. Thus the system, that a respective tool will be based on, is analysed. Furthermore an outlook will be given on the needs of the potential users of a DSS and how it has to be embedded in the overall planning process. The limits of computer-based decision-support in the

  9. The StreamCat Dataset: Accumulated Attributes for NHDPlusV2 (Version 2.1) Catchments for the Conterminous United States: Dam Density and Storage Volume

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset represents the dam density and storage volumes within individual, local NHDPlusV2 catchments and upstream, contributing watersheds based on National...

  10. The StreamCat Dataset: Accumulated Attributes for NHDPlusV2 Catchments (Version 2.1) for the Conterminous United States: Dam Density and Storage Volume

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset represents the dam density and storage volumes within individual, local NHDPlusV2 catchments and upstream, contributing watersheds based on National...

  11. Predictions of total deformations in Jebba main dam by finite ...

    African Journals Online (AJOL)

    This paper examined the deformations of the Jebba Main Dam, Jebba Nigeria using the finite element method. The study also evaluated the predicted deformations and compared them with the actual deformations in the dam to identify possible causes of the observed longitudinal crack at the dam crest. The Jebba dam is a ...

  12. Nanolevel Functionalization of Natural Fiber Textiles

    Science.gov (United States)

    Vihodceva, S.; Kukle, S.; Barloti, J.

    2011-06-01

    One of the main tasks of presented research are to impact the additional value on natural fabrics by adding them new properties with a metal nano-level coating, evaluate coating technologies. Having the ability to control the surface of a natural fiber offers great rewards that go far beyond pure economics as natural fibers are renewable and biodegradable. The paper describes the process of vacuum evaporation and magnetron sputtering of copper coatings on cotton textile materials, analysis of the metal coated textile surface by laser laboratory complex and SEM. The investigation results evince that laser laboratory complex measurements of reflected and through covered material transmitted light can be applied to trace the unevenness of deposited metal film on the covered fabric surface and its changes from exploitation impacts without samples destruction.

  13. Smart Textiles in Humanistic Hospital Design

    DEFF Research Database (Denmark)

    Mogensen, Jeppe Emil; Fisker, Anna Marie; Poulsen, Søren Bolvig

    2013-01-01

    With the construction of new hospitals, the design principle healing architecture is introduced, representing the humanistic vision of improving hospitalised patients’ healing process, supported by stimulating architecture. In this regard, we address focus on the potential influence of the design....... Associated with the methodology of evidence-based design (EBD), we in this regard question, if these challenges derive from conflicting paradigms of some of the stakeholders involved in the design process? Relating to the Danish scene of hospital design, we introduce the research project “Smart Textiles...... in Future Hospitals”, stating the overall hypothesis that textiles in hospital interiors possess an unexploited architectural potential in relation to the humanistic visions of healing architecture. Concerned with the operational challenge of unfolding the visionary design principle, we suggest to re...

  14. Development of test methods for textile composites

    Science.gov (United States)

    Masters, John E.; Ifju, Peter G.; Fedro, Mark J.

    1993-01-01

    NASA's Advanced Composite Technology (ACT) Program was initiated in 1990 with the purpose of developing less costly composite aircraft structures. A number of innovative materials and processes were evaluated as a part of this effort. Chief among them are composite materials reinforced with textile preforms. These new forms of composite materials bring with them potential testing problems. Methods currently in practice were developed over the years for composite materials made from prepreg tape or simple 2-D woven fabrics. A wide variety of 2-D and 3-D braided, woven, stitched, and knit preforms were suggested for application in the ACT program. The applicability of existing test methods to the wide range of emerging materials bears investigation. The overriding concern is that the values measured are accurate representations of the true material response. The ultimate objective of this work is to establish a set of test methods to evaluate the textile composites developed for the ACT Program.

  15. ANALYSIS OF THE WORKING CONDITIONS WITH CONSIDERATION-HAZARD POTENTIAL HEALTH AND SAFETY OF EMPLOYEES IN TEXTILE INDUSTRY

    Directory of Open Access Journals (Sweden)

    UROŠEVIĆ Snežana

    2016-05-01

    Full Text Available Safety and health measures have a very important role in any kind of industry, especially in the textile, which emit a wide range of pollutants at all stages of processing fibers into textile materials. Most processes have a negative impact on the living and working environment. However, their health and their safety at work are exposed almost daily dangers, depending on the nature of work and the conditions under which the work takes place. Therefore, the modern organization requires to create a safe and harmless working conditions, in order to adequate protection of their health and their safety. This paper will analyze the work environment in three textile factories involved in the production and processing with consideration of end jobs where there are potential threats to the health and safety of employees. An effective and powerful system of managing the health and safety of employees at work can help to translate the uncontrolled hazards controlled risk and thus better protect the welfare of employees and companies. Key words: textile industry, working conditions, safety, health, employees

  16. GIITEX: investigación en la industria textil

    OpenAIRE

    Bonet Aracil, María Angeles; BOU-BELDA Eva; Montava Seguí, Ignacio José; Díaz-García, Pablo; Monllorpérez, Pablo

    2013-01-01

    [ES] El GIITEX es un grupo de investigación de la Universidad Politécnica de Valencia. Centra su labor investigación en todas aquellas investigaciones que están relacionadas con el sector textil. El la actualidad el GIITEX trabaja en las líneas de investigación siguientes: adaptación de nuevas tecnologías a procesos productivos textiles; biomateriales y procesos biotecnológicos de aplicación textil; análisis de la capacidad de cosido de un hilo; funcionalización de textiles mediante la adició...

  17. Energy-harvesting & self-actuated textiles for the home

    DEFF Research Database (Denmark)

    Mossé, Aurélie

    2010-01-01

    for smart textiles by questioning how they can be implemented within a domestic context to encourage more resilient environments. More specifically investigating the potential of energyharvesting & self-actuated textiles, the project hopes to highlight new ways for thinking the home as a more permeable...... the context of rising sustainable design agendas, the role and influence of new materials and technologies on the conceptualization and making of responsive textiles. Exploring the intersection between textiles, architecture and smart technologies, this on-going research aims to map out new design territories...

  18. Textile Technologies and Tissue Engineering: A Path Towards Organ Weaving

    Science.gov (United States)

    Akbari, Mohsen; Tamayol, Ali; Bagherifard, Sara; Serex, Ludovic; Mostafalu, Pooria; Faramarzi, Negar; Mohammadi, Mohammad Hossein

    2016-01-01

    Textile technologies have recently attracted great attention as potential biofabrication tools for engineering tissue constructs. Using current textile technologies, fibrous structures can be designed and engineered to attain the required properties that are demanded by different tissue engineering applications. Several key parameters such as physiochemical characteristics of fibers, pore size and mechanical properties of the fabrics play important role in the effective use of textile technologies in tissue engineering. This review summarizes the current advances in the manufacturing of biofunctional fibers. Different textile methods such as knitting, weaving, and braiding are discussed and their current applications in tissue engineering are highlighted. PMID:26924450

  19. Comparison of Quantitative Antifungal Testing Methods for Textile Fabrics.

    Science.gov (United States)

    Imoto, Yasuo; Seino, Satoshi; Nakagawa, Takashi; Yamamoto, Takao A

    2017-01-01

     Quantitative antifungal testing methods for textile fabrics under growth-supportive conditions were studied. Fungal growth activities on unfinished textile fabrics and textile fabrics modified with Ag nanoparticles were investigated using the colony counting method and the luminescence method. Morphological changes of the fungi during incubation were investigated by microscopic observation. Comparison of the results indicated that the fungal growth activity values obtained with the colony counting method depended on the morphological state of the fungi on textile fabrics, whereas those obtained with the luminescence method did not. Our findings indicated that unique characteristics of each testing method must be taken into account for the proper evaluation of antifungal activity.

  20. Roadmap to sustainable textiles and clothing regulatory aspects and sustainability standards of textiles and the clothing supply chain

    CERN Document Server

    2015-01-01

    This book covers the elements involved in achieving sustainability in textiles and clothing sector. The chapters covered in three volumes of this series title cover all the distinctive areas earmarked for achieving sustainable development in textiles and clothing industry. This third volume highlights the areas pertaining to the regulatory aspects and sustainability standards applicable to textiles and clothing supply chain. There are various standards earmarked for measuring the environmental impacts and sustainability of textile products. There are also plenty of certification schemes available along with the index systems applicable to textile sector. Brands and manufactures are also venturing into new developments to achieve sustainable development in textile sector. This third volume addresses all these important aspects.

  1. Textile UWB Antenna Bending and Wet Performances

    OpenAIRE

    Mai A.R.Osman; Rahim, M. K. A.; N. A. Samsuri; M. K. Elbasheer; M. E. Ali

    2012-01-01

    The vision and ideas of wearable computing systems describe future electronic systems as an integral part of our everyday clothing that provides the wearer with such intelligent personal assistants. Recently, there has been growing interest in the antenna community to merge between wearable systems technology, ultrawideband (UWB) technology and textile technology. This work aimed to make closer steps towards real wearability by investigating the possibilities of designing wearable UWB antenna...

  2. Kaleidoscope – Printed Textiles by Neil Bottle

    OpenAIRE

    Bottle, Neil

    2013-01-01

    One man show at Rochester Art Gallery. In the Kaleidoscope series, Neil Bottle explores the relationship between digital textile printing and craft printing techniques and how these seemingly opposing practices can coexist. A combination of the latest cutting-edge digital print techniques such as dye sublimation combined with craft traditions such as screen printing, discharge printing, pleating and shibori have been developed in the work. The Kaleidoscope series of wallhangings is pr...

  3. Impact testing of textile composite materials

    Science.gov (United States)

    Portanova, Marc

    1995-01-01

    The objectives of this report were to evaluate the impact damage resistance and damage tolerance of a variety of textile composite materials. Static indentation and impact tests were performed on the stitched and unstitched uniweave composites constructed from AS4/3501-6 Carbon/Epoxy with a fiberglass yarn woven in to hold the fibers together while being stitched. Compression and tension were measured after the tests to determine the damage resistance, residual strength and the damage tolerance of the specimens.

  4. Mechanics Methodology for Textile Preform Composite Materials

    Science.gov (United States)

    Poe, Clarence C., Jr.

    1996-01-01

    NASA and its contractors have completed a program to develop a basic mechanics underpinning for textile composites. Three major deliverables were produced by the program: 1. A set of test methods for measuring material properties and design allowables; 2. Mechanics models to predict the effects of the fiber preform architecture and constituent properties on engineering moduli, strength, damage resistance, and fatigue life; and 3. An electronic data base of coupon type test data. This report describes these three deliverables.

  5. Interactive educational software of textile desing

    OpenAIRE

    Hernández Abad, Francisco; Rojas Sola, José Ignacio; Hernández Abad, Vicente; Ochoa Vives, Manuel; Font Andreu, Jorge; Hernández Díaz, David; Villar Ribera, Ricardo Alberto

    2010-01-01

    This paper presents a novel educational software package which develops an Interactive Didactic Application (IDA) created in the Polytechnic University of Catalonia (UPC), and which contains the essentials of Textile Design. It is an open application which uses a database in ASCII format. The principal elements of this database are lists of whole numbers structured according to indexed colors in standard RGB format. This generates a rational system of indexes of numerical lists, which a...

  6. FINANCIAL PERFORMANCE EVOLUTIONS OF TEXTILE SECTOR ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Nicoleta BARBUTA MISU

    2005-01-01

    Full Text Available The complete liberalization of international trade led to important changes in financial performancesof the national enterprises. This paper has in view to present the consequences of these changes fromthe macroeconomic level to microeconomic level. Thus, indicators of the financial performance forthree enterprises at the textile sector from Galati are studied selectively. The scope of this study isboth to realize a financial performance hierarchy and to present of their evolution directions in thefuture.

  7. Influence of textile properties on thermal comfort

    Science.gov (United States)

    Marolleau, A.; Salaun, F.; Dupont, D.; Gidik, H.; Ducept, S.

    2017-10-01

    This study reports on the impact of textile properties on thermal comfort. The fabric weight, thickness, porosity, moisture regain, air permeability and density have been considered and correlated to the thermal and water vapour resistance, permeability index, thermal conductivity and effusivity, and moisture management capacity. Results suggest that moisture transfer is affected by thickness, density and moisture regain whereas thermal transfer by air permeability and density.

  8. Textile sustainability: reuse of clean waste from the textile and apparel industry

    Science.gov (United States)

    Broega, A. C.; Jordão, C.; Martins, S. B.

    2017-10-01

    Today societies are already experiencing changes in their production systems and even consumption in order to guarantee the survival and well-being of future generations. This fact emerges from the need to adopt a more sustainable posture in both people’s daily lives and productive systems. Within this context, textile sustainability emerges as the object of study of this work whose aim is to analyse which sustainability dimensions are being prioritized by the clean waste management systems of the textile and garment industries. This article aims to analyse solutions that are being proposed by sustainable creative business models in the reuse of discarded fabrics by the textile industry. Search also through a qualitative research by a case study (the Reuse Fabric Bank) understand the benefits generated by the re-use in environmental, economic, social and ways to add value.

  9. Degradation of textile dyes by cyanobacteria

    Directory of Open Access Journals (Sweden)

    Priscila Maria Dellamatrice

    Full Text Available Abstract Dyes are recalcitrant compounds that resist conventional biological treatments. The degradation of three textile dyes (Indigo, RBBR and Sulphur Black, and the dye-containing liquid effluent and solid waste from the Municipal Treatment Station, Americana, São Paulo, Brazil, by the cyanobacteria Anabaena flos-aquae UTCC64, Phormidium autumnale UTEX1580 and Synechococcus sp. PCC7942 was evaluated. The dye degradation efficiency of the cyanobacteria was compared with anaerobic and anaerobic-aerobic systems in terms of discolouration and toxicity evaluations. The discoloration was evaluated by absorption spectroscopy. Toxicity was measured using the organisms Hydra attenuata, the alga Selenastrum capricornutum and lettuce seeds. The three cyanobacteria showed the potential to remediate textile effluent by removing the colour and reducing the toxicity. However, the growth of cyanobacteria on sludge was slow and discoloration was not efficient. The cyanobacteria P. autumnale UTEX1580 was the only strain that completely degraded the indigo dye. An evaluation of the mutagenicity potential was performed by use of the micronucleus assay using Allium sp. No mutagenicity was observed after the treatment. Two metabolites were produced during the degradation, anthranilic acid and isatin, but toxicity did not increase after the treatment. The cyanobacteria showed the ability to degrade the dyes present in a textile effluent; therefore, they can be used in a tertiary treatment of effluents with recalcitrant compounds.

  10. Degradation of textile dyes by cyanobacteria.

    Science.gov (United States)

    Dellamatrice, Priscila Maria; Silva-Stenico, Maria Estela; Moraes, Luiz Alberto Beraldo de; Fiore, Marli Fátima; Monteiro, Regina Teresa Rosim

    Dyes are recalcitrant compounds that resist conventional biological treatments. The degradation of three textile dyes (Indigo, RBBR and Sulphur Black), and the dye-containing liquid effluent and solid waste from the Municipal Treatment Station, Americana, São Paulo, Brazil, by the cyanobacteria Anabaena flos-aquae UTCC64, Phormidium autumnale UTEX1580 and Synechococcus sp. PCC7942 was evaluated. The dye degradation efficiency of the cyanobacteria was compared with anaerobic and anaerobic-aerobic systems in terms of discolouration and toxicity evaluations. The discoloration was evaluated by absorption spectroscopy. Toxicity was measured using the organisms Hydra attenuata, the alga Selenastrum capricornutum and lettuce seeds. The three cyanobacteria showed the potential to remediate textile effluent by removing the colour and reducing the toxicity. However, the growth of cyanobacteria on sludge was slow and discoloration was not efficient. The cyanobacteria P. autumnale UTEX1580 was the only strain that completely degraded the indigo dye. An evaluation of the mutagenicity potential was performed by use of the micronucleus assay using Allium sp. No mutagenicity was observed after the treatment. Two metabolites were produced during the degradation, anthranilic acid and isatin, but toxicity did not increase after the treatment. The cyanobacteria showed the ability to degrade the dyes present in a textile effluent; therefore, they can be used in a tertiary treatment of effluents with recalcitrant compounds. Copyright © 2016 Sociedade Brasileira de Microbiologia. Published by Elsevier Editora Ltda. All rights reserved.

  11. Toward a systematic classification of textile damages.

    Science.gov (United States)

    Schulman, T G; Samlal-Soedhoe, R S; van der Weerd, J

    2018-01-01

    The accuracy of textile damage analyses was evaluated by laboratory tests carried out by trained experts. The analyzed damages were prepared by various methods, including stabbing, cutting, shooting, heating/burning, etc. A number of damages were aged by household washing and tumble-drying procedures, addition of blood, or burying. The samples were analyzed by routine laboratory evaluation. The results indicate that the properties of a damage provide a good indication of the way a textile had been damaged. Nevertheless, scoring of the answers is not straightforward. Results indicated that examiners evaluated damages on different levels of specificity and thereby showed the latent need for a more systematic approach to damage classification. The second part of the current contribution therefore presents the classification scheme we developed. This classification scheme aims to guide examiners during examination and accommodates the vast majority of textile damages observed in forensic casework. Each of the proposed classes is defined, relevant literature in each of the classes is reviewed, and the characteristics that can be expected after different damaging actions are explained. Finally, we share some ideas for further investigations. Copyright © 2018 Central Police University.

  12. Smart Textiles for Strengthening of Structures

    Science.gov (United States)

    Górski, Marcin; Krzywoń, Rafał; Dawczyński, Szymon; Szojda, Leszek; Salvado, Rita; Lopes, Catarina; Araujo, Pedro; Velez, Fernando Jose; Castro-Gomes, Joao

    2016-11-01

    This paper presents results of mechanical tests on a prototype of an innovative structural strengthening in form of self-monitoring fabric. Smart textile employs carbon fibers conductivity for measuring strains while monitoring changes of electric resistance under increasing load. A general solution was tested in a series of calibrating tests on strengthening of small size concrete slabs. Promising results of simple specimen, has encouraged the research team to perform the next tests using mastered carbon fibre reinforced fabric. Main tests were performed on natural scale RC beam. Smart textile proved its efficiency in both: strengthening and monitoring of strains during load increase. New strengthening proposal was given 10% increase of loading capacity and the readings of strain changes were similar to those obtained in classical methods. In order to calibrate the prototype and to define range limits of solution usability, textile sensor was tested in areas of large deformations (timber beam) and aswell as very small strains (bridge bearing block). In both cases, the prototype demonstrated excellent performance in the range of importance for structural engineering. This paper also presents an example of use of the smart strengthening in situ, in a real life conditions.

  13. Dam break analysis and flood inundation map of Krisak dam for emergency action plan

    Science.gov (United States)

    Juliastuti, Setyandito, Oki

    2017-11-01

    The Indonesian Regulation which refers to the ICOLD Regulation (International Committee on Large Dam required have the Emergency Action Plan (EAP) guidelines because of the dams have potential failure. In EAP guidelines there is a management of evacuation where the determination of the inundation map based on flood modeling. The purpose of the EAP is to minimize the risk of loss of life and property in downstream which caused by dam failure. This paper will describe about develop flood modeling and inundation map in Krisak dam using numerical methods through dam break analysis (DBA) using hydraulic model Zhong Xing HY-21. The approaches of dam failure simulation are overtopping and piping. Overtopping simulation based on quadrangular, triangular and trapezium fracture. Piping simulation based on cracks of orifice. Using results of DBA, hazard classification of Krisak dam is very high. The nearest village affected dam failure is Singodutan village (distance is 1.45 kilometer from dam) with inundation depth is 1.85 meter. This result can be used by stakeholders such as emergency responders and the community at risk in formulating evacuation procedure.

  14. Oxidative stress defence responses of wheat (Triticum aestivum L.) and chilli (Capsicum annum L.) cultivars grown under textile effluent fertilization.

    Science.gov (United States)

    Singh, Ratan; Rathore, Dheeraj

    2018-02-01

    Oxidative stress is complex physiological phenomenon that accompanies virtually in all stresses including either the deficiency or the surplus of micronutrients in the soil. In response to reactive oxygen species (ROS) generation, plants use a range of mechanisms to minimize the toxicity and protect cell membranes from damage. There are known reports indicating that effluents from the textile industry can serve as a micronutrient supplier under otherwise limited conditions. However, the addition of these effluents may cause toxicity to plants due to the presence of some non-essential heavy metals and persistent compounds if supplied in excess. A mesocosm study was conducted with wheat (Triticum aestivum L) and chilli (Capsicum annum L) cultivars grown under textile effluent fertilization to evaluate the accumulation of malondialdehyde (MDA) and H 2 O 2 , and the enzymatic and non-enzymatic antioxidative defences developed against this stress. Our findings indicated that the accumulation of MDA and H 2 O 2 were mainly stimulated in control plants (0% textile effluent) followed by 60% concentration of textile effluent fertilization. Plants counteract oxidative stress by increasing both enzymatic (Superoxide dismutase, SOD; catalase, CAT; peroxidase, POX; ascorbate peroxidase, APX; glutathione reductase, GR) and non-enzymatic (phenolic compounds, flavonoids and ascorbic acid) antioxidants significantly. The activities of major antioxidants were promoted by higher concentrations of textile effluents. In addition, low antioxidative defences against damage caused by oxidative stress to the controls were evident by yield loss and deteriorated product quality. Compared to the chilli cultivars, MDA and H 2 O 2 were higher in wheat cultivars; at the same time activities of antioxidants were also higher in wheat cultivars. The results of this study showed that the application of textile effluents supplied plant nutrients which improved antioxidative defences by regulating the

  15. 33 CFR 208.19 - Marshall Ford Dam and Reservoir (Mansfield Dam and Lake Travis), Colorado River, Tex.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Marshall Ford Dam and Reservoir... Marshall Ford Dam and Reservoir (Mansfield Dam and Lake Travis), Colorado River, Tex. The Secretary of the Interior, through his agent, the Lower Colorado River Authority (LCRA) shall operate the Marshall Ford Dam...

  16. Physical - Elwha River Dam Removal Study

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This study examines the ecosystem response of the Elwha River to the removal of the Elwha River dams. We will measure the following attributes of ecosystem response:...

  17. Dams life; La vie des barrages

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This paper summarizes the conclusions of the annual inspections of French dams in operation (fissures, water oozing, concrete swelling etc..). Only the observations which require a special attention are reported. (J.S.)

  18. Chemical - Elwha River Dam Removal Study

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This study examines the ecosystem response of the Elwha River to the removal of the Elwha River dams. We will measure the following attributes of ecosystem response:...

  19. Biological - Elwha River Dam Removal Study

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This study examines the ecosystem response of the Elwha River to the removal of the Elwha River dams. We will measure the following attributes of ecosystem response:...

  20. Final Design Analysis : Lake Ladora Dam Repair

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report is intended to present Rocky Mountain Arsenal with details concerning the remedial repair for Ladora Dam to meet the geotechnical concerns and hydrologic...

  1. Technical bulletin : geotechnical considerations for dam safety

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    The safety of dams requires a thorough understanding of the geotechnical elements of dam design. This technical bulletin outlined methods for conducting geotechnical assessments as part of dam safety analyses. It included an overview of methods for minimizing and control seepage, as well as preventing internal and surface erosion. Geotechnical considerations for foundation, abutments, and reservoir bank slope conditions were also presented. Geotechnical safety assessment techniques were presented for earthfill, embankment, and rockfill dams. Appurtenant structures, reservoir rims, and foundations were examined. Hazards and failure modes included overtopping, internal erosion, slope instability, and earthquake liquefaction. Foundation irregularities and surface erosion assesment methods were presented. Geotechnical considerations for loading conditions, shear strength, discontinuities, compatibilities, foundation permeability, and foundation compressibility were presented along with analysis, design, and remedial considerations. 53 refs., 6 tabs.

  2. Propiedades generales de los suavizantes textiles catiónicos: especificaciones de producto y sus efectos en los textiles.

    OpenAIRE

    Carrión Fité, Francisco Javier

    1988-01-01

    Tras la introducción de los suavizantes como productos auxiliares textiles, se recalca la importancia comercial de los suavizantes textiles catiónicos, incidiendo tanto en los aspectos relacionados con la formulacion del producto como en su efecto sobre los textiles, comentando el cambio de propiedades táctiles, mecánicas, funcionales y de aspecto de los mismos. Se resumen aspectos generales físico-químicos relativos a su adsorción por parte de los textiles, citando por ultimo algunos metodos...

  3. Repair and Rehabilitation of Dams: Case Studies

    Science.gov (United States)

    1999-09-01

    were grouted. In 1958, the entire downstream face of the dam was resurfaced with gunite, and wrought iron nosing was installed on the gatehouse intake...Cpm (32 gpm), virtually all of which was entering the gallery through vertical roof drains and fissures well above the levels grouted. The concrete...long center con- crete gravity dam contains a 12-m- (40-ft-) long gatehouse structure and a 73.5-m- (41-ft-) long flashboard regulated spillway

  4. Crosshole seismic tomography across a masonry dam

    Science.gov (United States)

    Wong, Joe

    1995-05-01

    An intensive crosshole seismic survey was done across a 700-foot-long stone-masonry dam. It involved measurements on six connected panels each approximately 100 feet in width extending completely across the dam from abutment to abutment. The objective was to provide tomographic images of P-wave velocity and dynamic elastic moduli of the dam and foundation materials along the axis of the dam. Field seismograms were recorded with an airgun source and hydrophone detectors. Data analysis included interactive time-picking, plotting of common source gathers, and tomographic imaging using an iterative back-propagation technique. Color-coded tomograms of velocity and dynamic Young's modulus were produced and correlated with geological and geophysical data measured on drill core samples. Low values of velocity and dynamic elastic modulus correlated with low RQD and high fracture frequency. The tomograms showed significant variations of mechanical properties in the stone masonry dam and its foundation. The colored tomograms were useful in highlighting zones of weak rock possibly requiring remedial action. They also assisted engineering evaluation of the dam by providing a detailed two-dimensional distribution of mechanical properties which can be used as ground truth data for numerical modeling of stress-strain fields.

  5. Estimating flood inundation caused by dam failures

    Energy Technology Data Exchange (ETDEWEB)

    Mocan, N. [Crozier and Associates Inc., Collingwood, ON (Canada); Joy, D.M. [Guelph Univ., ON (Canada). School of Engineering; Rungis, G. [Grand River Conservation Authority, Cambridge, ON (Canada)

    2006-01-15

    Recent advancements in modelling inundation due to dam failures have allowed easier and more illustrative analyses of potential outcomes. This paper described new model and mapping capabilities available using the HEC-RAS hydraulic model in concert with geographic information systems (GIS). The study area was the upper reaches of Canagagigue Creek and the Woolwich Dam near Elmira, Ontario. A hydraulic analysis of a hypothetical dam failure was developed based on the summer probable maximum flood (PMF) event. Limits extended from Woolwich Dam to downstream of the Town of Elmira. An incoming summer PMF hydrograph was set as the upstream boundary condition in the upstream model. Simulation parameters include simulation time-step; implicit weighting factor; water surface calculation tolerance; and output calculation interval. Peak flows were presented, as well as corresponding flood inundation results through the Town of Elmira. The hydraulic model results were exported to a GIS in order to develop inundation maps for emergency management planning. Results from post-processing included inundation maps for each of the simulated time-steps as well as an inundation animation for the duration of the dam breach. It was concluded that the modelling tools presented in the study can be applied to other dam safety assessment projects in order to develop effective and efficient emergency preparedness plans through public consultation and the establishment of impact zones. 1 tab., 2 figs.

  6. Geodetic deformation monitoring at Pendidikan Diponegoro Dam

    Science.gov (United States)

    Yuwono, Bambang Darmo; Awaluddin, Moehammad; Yusuf, M. A.; Fadillah, Rizki

    2017-07-01

    Deformation monitoring is one indicator to assess the feasibility of Dam. In order to get the correct result of the deformation, it is necessary to determine appropriate deformation monitoring network and the observation data should be analyse and evaluated carefully. Measurement and analysis of deformation requires relatively accurate data and the precision is high enough, one of the observation method that used is GPS (Global Positioning System). The research was conducted at Pendidikan Undip Dams is Dam which is located in Tembang. Diponegoro Dam was built in 2013 and a volume of 50.86 m3 of water, inundation normal width of up to 13,500 m2. The main purpose of these building is not only for drainage but also for education and micro hydro power plant etc. The main goal of this reasearch was to monitor and analyze the deformation at Pendidikan Undip Dam and to determaine whether GPS measurement could meet accuracy requirement for dam deformation measurements. Measurements were made 2 times over 2 years, 2015 and 2016 using dual frequency GPS receivers with static methods and processed by Scientific Software GAMIT 10.6

  7. Global phosphorus retention by river damming.

    Science.gov (United States)

    Maavara, Taylor; Parsons, Christopher T; Ridenour, Christine; Stojanovic, Severin; Dürr, Hans H; Powley, Helen R; Van Cappellen, Philippe

    2015-12-22

    More than 70,000 large dams have been built worldwide. With growing water stress and demand for energy, this number will continue to increase in the foreseeable future. Damming greatly modifies the ecological functioning of river systems. In particular, dam reservoirs sequester nutrient elements and, hence, reduce downstream transfer of nutrients to floodplains, lakes, wetlands, and coastal marine environments. Here, we quantify the global impact of dams on the riverine fluxes and speciation of the limiting nutrient phosphorus (P), using a mechanistic modeling approach that accounts for the in-reservoir biogeochemical transformations of P. According to the model calculations, the mass of total P (TP) trapped in reservoirs nearly doubled between 1970 and 2000, reaching 42 Gmol y(-1), or 12% of the global river TP load in 2000. Because of the current surge in dam building, we project that by 2030, about 17% of the global river TP load will be sequestered in reservoir sediments. The largest projected increases in TP and reactive P (RP) retention by damming will take place in Asia and South America, especially in the Yangtze, Mekong, and Amazon drainage basins. Despite the large P retention capacity of reservoirs, the export of RP from watersheds will continue to grow unless additional measures are taken to curb anthropogenic P emissions.

  8. Synthesis of Juvenile Salmonid Passage Studies at The Dalles Dam, Volume II, 2001-05

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Gary E.; Beeman, John W.; Duran, Ian; Puls, Andrew

    2007-08-15

    The overall goal of juvenile salmonid research at The Dalles Dam is to provide data to inform decisions on strategies to improve smolt survival rates at the project. Survival improvement strategies address the three primary passage routes at The Dalles Dam -- spillway, sluiceway, and turbines – with the general intent to increase spill and sluice passage and decrease turbine passage. Since the review by Ploskey et al. (2001a) of research during 1982-2000 at The Dalles Dam, the Corps funded over $20M of research in at least 39 studies during 2001-2006. The purpose of the current review is to synthesize juvenile salmonid passage data at The Dalles Dam (TDA) collected from 2001 through 2006. The data we synthesize comes from numerous research techniques employed to address particular study objectives at The Dalles Dam. The suite of techniques includes acoustic and radio telemetry, acoustic cameras, acoustic Doppler current profilers, balloon tags, computational fluid dynamics models, drogues, fixed and mobile hydroacoustics, fyke nets, physical scale models, PIT-tags, sensor fish, sonar trackers, and underwater video. Hydraulic data involves flow patterns and water velocities. Biological data involve forebay approach paths and residence times, horizontal and diel distributions, passage efficiencies and effectiveness, fish behaviors, tailrace egress and predation rates, and route-specific and total project survival rates. Data for 2001-2006 are synthesized in this report to provide, in conjunction with Ploskey et al. (2001a), resources for engineers, biologists, and dam operators to use when making decisions about fish protection measures for juvenile salmonids at The Dalles Dam. This review covers the major fish passage research efforts during 2001-2006 and includes sections on the Environmental Setting, Forebay and Project Passage Studies, Spill Studies, Sluiceway Studies, Turbine Studies, Smolt Survival Studies, and a Discussion.

  9. Ten years of the Three Gorges Dam: a call for policy overhaul

    Science.gov (United States)

    Yang, Xiankun; Lu, X. X.

    2013-12-01

    The Three Gorges Dam (TGD), the world’s largest source of ‘clean’ hydroelectric power (Shen and Xie 2004), has entered its tenth year after the first turbine went into operation in June 2003. The dam, with a generating capacity 20 times that of the United States’ Hoover Dam, has been hailed as a crucial part of a solution to China’s energy crisis. Despite great benefits, however, major concerns have been voiced over the disastrous environmental and social consequences of this massive engineering project (Stone 2011). In this paper, we review the benefits and impacts learned from the controversial megadam over the past decade and discuss perspective quests on policy overhaul for future environmental protection.

  10. Hungry Horse Dam Fisheries Mitigation Implementation Plan, 1990-2003 Progress (Annual) Report.

    Energy Technology Data Exchange (ETDEWEB)

    Montana Department of Fish, Wildlife and Parks; Confederated Salish and Kootenai Tribes

    1993-03-10

    In this document the authors present mitigation implementation activities to protect and enhance resident fish and aquatic habitat affected by the construction and operation of Hungry Horse Dam. This plan only addresses non-operational actions (mitigation measures that do not affect dam operation) described in the 'Fisheries Mitigation Plan for Losses Attributable to the Construction and Operation of Hungry Horse Dam' (Mitigation Plan) submitted to the Northwest Power Planning Council (Council) in March 1991 and in accordance with subsequent Council action on that Mitigation Plan. Operational mitigation was deferred for consideration under the Columbia Basin System Operation Review (SOR) process. This document represents an implementation plan considered and conditionally approved by the Council in March of 1993.

  11. Hygiene monitoring of textiles used in the food industry Monitoramento da higiene de têxteis usados na indústria de alimentos

    OpenAIRE

    Sabina Fijan; Avrelija Cencic; Sonja Šostar Turk

    2006-01-01

    Protective clothing is required in the food-processing industry, to protect workers from contamination by bacteria, fungi, viruses, prions etc. contained in the secretions and raw meat of slaughtered animals, and to protect the meat from being contaminated by microorganisms carried by the workers. It is well-understood that textiles are a control point (CP), and must be appropriately cleaned and disinfected in order to prevent biocontamination. Although the laundering procedure itself is impo...

  12. Fundamental and practical aspects concerning the characterization of smart textiles

    Directory of Open Access Journals (Sweden)

    Broasca Gianina

    2017-01-01

    Full Text Available The research aims towards a novel methodology of ZnO impregnation onto polyamide supports, in order to attain a special inorganic-organic hybrid polymer material, with increased UV-barrier attributes and high hydrophobicity. The experimental approach employed ZnO micro particles powder. Solutions with different concentrations of ZnO powder dispersed in methanol are prepared as anti-UV finishing agent and applied onto polyamide fabric. The responsive behaviour of this complex polymer network to UV irradiation, the photo protective performance and its time stability, also the hydrophobic character are assessed by different characterization techniques. The proposed method has advantages, like: easy standardization, at lower production cost, resulting a high homogeneity and dispersion of ZnO micro particles into the textile polymeric network. The covered polymeric supports show better photo protective response, higher hydrophobicity and control on the surface charge induced by irradiation. This method granted enhanced quality, comfort and long term stability of the intelligent/smart garments.

  13. Chixoy Dam Legacies: The Struggle to Secure Reparation and the Right to Remedy in Guatemala

    Directory of Open Access Journals (Sweden)

    Barbara Rose Johnston

    2010-06-01

    Full Text Available The World Commission on Dams brought global attention to the adverse costs of large dam development, including the disproportionate displacement of indigenous peoples and ethnic minorities and the extreme impoverishment of development refugees. The WCD recommended that governments, industry and financial institutions accept responsibility for flawed development and make proper reparation, including remedial activities such as the restoration of livelihood and land compensation for relocated communities. One exemplary case cited is Guatemala’s Chixoy dam. Completed in 1982, this internationally financed dam was built during a time when military dictatorships deployed policies of state-sponsored violence against a Mayan citizenry. Construction occurred without a resettlement plan, and forced displacement occurred through violence and massacre. This paper describes an attempt to implement WCD reparation recommendations in a context where no political will existed. To clarify events, abuses and meaningful remedy, an independent assessment process was established in 2003, auditing the development record, assessing consequential damages and facilitating the community articulation of histories and needs. The resulting 2005 study played a key role in reparation negotiations. The Chixoy case illustrates some of the more profound impacts of the WCD review. The WCD served as a catalyst in social movement formation and a force that expanded rights-protective space for dam-affected communities to negotiate an equitable involvement in development.

  14. Production and validation of model iron-tannate dyed textiles for use as historic textile substitutes in stabilisation treatment studies

    Directory of Open Access Journals (Sweden)

    Wilson Helen

    2012-05-01

    Full Text Available Abstract Background For millennia, iron-tannate dyes have been used to colour ceremonial and domestic objects shades of black, grey, or brown. Surviving iron-tannate dyed objects are part of our cultural heritage but their existence is threatened by the dye itself which can accelerate oxidation and acid hydrolysis of the substrate. This causes many iron-tannate dyed textiles to discolour and decrease in tensile strength and flexibility at a faster rate than equivalent undyed textiles. The current lack of suitable stabilisation treatments means that many historic iron-tannate dyed objects are rapidly crumbling to dust with the knowledge and value they hold being lost forever. This paper describes the production, characterisation, and validation of model iron-tannate dyed textiles as substitutes for historic iron-tannate dyed textiles in the development of stabilisation treatments. Spectrophotometry, surface pH, tensile testing, SEM-EDX, and XRF have been used to characterise the model textiles. Results On application to textiles, the model dyes imparted mid to dark blue-grey colouration, an immediate tensile strength loss of the textiles and an increase in surface acidity. The dyes introduced significant quantities of iron into the textiles which was distributed in the exterior and interior of the cotton, abaca, and silk fibres but only in the exterior of the wool fibres. As seen with historic iron-tannate dyed objects, the dyed cotton, abaca, and silk textiles lost tensile strength faster and more significantly than undyed equivalents during accelerated thermal ageing and all of the dyed model textiles, most notably the cotton, discoloured more than the undyed equivalents on ageing. Conclusions The abaca, cotton, and silk model textiles are judged to be suitable for use as substitutes for cultural heritage materials in the testing of stabilisation treatments.

  15. Production and validation of model iron-tannate dyed textiles for use as historic textile substitutes in stabilisation treatment studies

    Science.gov (United States)

    2012-01-01

    Background For millennia, iron-tannate dyes have been used to colour ceremonial and domestic objects shades of black, grey, or brown. Surviving iron-tannate dyed objects are part of our cultural heritage but their existence is threatened by the dye itself which can accelerate oxidation and acid hydrolysis of the substrate. This causes many iron-tannate dyed textiles to discolour and decrease in tensile strength and flexibility at a faster rate than equivalent undyed textiles. The current lack of suitable stabilisation treatments means that many historic iron-tannate dyed objects are rapidly crumbling to dust with the knowledge and value they hold being lost forever. This paper describes the production, characterisation, and validation of model iron-tannate dyed textiles as substitutes for historic iron-tannate dyed textiles in the development of stabilisation treatments. Spectrophotometry, surface pH, tensile testing, SEM-EDX, and XRF have been used to characterise the model textiles. Results On application to textiles, the model dyes imparted mid to dark blue-grey colouration, an immediate tensile strength loss of the textiles and an increase in surface acidity. The dyes introduced significant quantities of iron into the textiles which was distributed in the exterior and interior of the cotton, abaca, and silk fibres but only in the exterior of the wool fibres. As seen with historic iron-tannate dyed objects, the dyed cotton, abaca, and silk textiles lost tensile strength faster and more significantly than undyed equivalents during accelerated thermal ageing and all of the dyed model textiles, most notably the cotton, discoloured more than the undyed equivalents on ageing. Conclusions The abaca, cotton, and silk model textiles are judged to be suitable for use as substitutes for cultural heritage materials in the testing of stabilisation treatments. PMID:22616934

  16. Synchronous Wearable Wireless Body Sensor Network Composed of Autonomous Textile Nodes

    Science.gov (United States)

    Vanveerdeghem, Peter; Van Torre, Patrick; Stevens, Christiaan; Knockaert, Jos; Rogier, Hendrik

    2014-01-01

    A novel, fully-autonomous, wearable, wireless sensor network is presented, where each flexible textile node performs cooperative synchronous acquisition and distributed event detection. Computationally efficient situational-awareness algorithms are implemented on the low-power microcontroller present on each flexible node. The detected events are wirelessly transmitted to a base station, directly, as well as forwarded by other on-body nodes. For each node, a dual-polarized textile patch antenna serves as a platform for the flexible electronic circuitry. Therefore, the system is particularly suitable for comfortable and unobtrusive integration into garments. In the meantime, polarization diversity can be exploited to improve the reliability and energy-efficiency of the wireless transmission. Extensive experiments in realistic conditions have demonstrated that this new autonomous, body-centric, textile-antenna, wireless sensor network is able to correctly detect different operating conditions of a firefighter during an intervention. By relying on four network nodes integrated into the protective garment, this functionality is implemented locally, on the body, and in real time. In addition, the received sensor data are reliably transferred to a central access point at the command post, for more detailed and more comprehensive real-time visualization. This information provides coordinators and commanders with situational awareness of the entire rescue operation. A statistical analysis of measured on-body node-to-node, as well as off-body person-to-person channels is included, confirming the reliability of the communication system. PMID:25302808

  17. INVESTIGATION OF DIFFERENT REDUCING AGENTS OF AZO DYES FROM TEXTILE MATERIALS

    Directory of Open Access Journals (Sweden)

    VARZARU Elena

    2017-05-01

    Full Text Available Toxicology of textiles is a subject of increasing interest, because of the presence of dangerous compounds in clothes generated from dyeing and finishing processes. In order to protect human health, numerous regulations (Oeko Tex Standard 100, REACH Regulation limit the presence of dangerous chemicals, such as aromatic amines, generated by reductive cleavage of azo dyes, by no more than 30 mg/kg of textile material. The objective of this work was to investigate different methods of azo dyes reduction from colored textile specimens, in order to determine the procedure with the highest selectivity and sensibility. Aromatic amines are generated by chemical degradation achieved by the cleavage of the azo linkage using reducing agents.Different alternatives to sodium dithionite, reducing agent recommended by standard method ISO/FDIS 14362-1 were tested, such as: sodium sulfite and tin chloride. Also, xylene extraction, the common procedure for synthetic fibers was also performed for cotton, dyed with azo dye Direct Blue 6, in order to assess the reliability of common simultaneously extraction and reduction of direct dyes from natural fibres. Sodium ditionite remains the popular choice for reducing agent, since it provides efficient cleavage of azo linkage, generating specifically carcinogenic amines. Both liquid and gas chromatography analytical techniques were used for precise quantitative determination of generated compounds.

  18. Synchronous Wearable Wireless Body Sensor Network Composed of Autonomous Textile Nodes

    Directory of Open Access Journals (Sweden)

    Peter Vanveerdeghem

    2014-10-01

    Full Text Available A novel, fully-autonomous, wearable, wireless sensor network is presented, where each flexible textile node performs cooperative synchronous acquisition and distributed event detection. Computationally efficient situational-awareness algorithms are implemented on the low-power microcontroller present on each flexible node. The detected events are wirelessly transmitted to a base station, directly, as well as forwarded by other on-body nodes. For each node, a dual-polarized textile patch antenna serves as a platform for the flexible electronic circuitry. Therefore, the system is particularly suitable for comfortable and unobtrusive integration into garments. In the meantime, polarization diversity can be exploited to improve the reliability and energy-efficiency of the wireless transmission. Extensive experiments in realistic conditions have demonstrated that this new autonomous, body-centric, textile-antenna, wireless sensor network is able to correctly detect different operating conditions of a firefighter during an intervention. By relying on four network nodes integrated into the protective garment, this functionality is implemented locally, on the body, and in real time. In addition, the received sensor data are reliably transferred to a central access point at the command post, for more detailed and more comprehensive real-time visualization. This information provides coordinators and commanders with situational awareness of the entire rescue operation. A statistical analysis of measured on-body node-to-node, as well as off-body person-to-person channels is included, confirming the reliability of the communication system.

  19. Synthesis and characterization of textile azo dyes derivatives of methoxyphenols

    OpenAIRE

    Ferreira, Isabel C.F.R.; Queiroz, Maria João R.P.

    1999-01-01

    Azo dyes are used extensively in the textile and dyestuff industries and effluents from these industrial processes are usually resistant to biological treatment. Textile azo dyes with bioaccessible groups such as guaiacol (2-methoxyphenol) and 2,6--dimethoxyphenol, for lignin-degrading fungus were synthesized using aminobenzoic and aminosulfonic acids as diazocomponents.

  20. Biodegradation of textile Azo Dyes by Phanerochaete chrysosporium

    OpenAIRE

    Ferreira, Isabel C.F.R.; Santos, Isabel M.; Queiroz, Maria João R.P.; Lima, Nelson

    1998-01-01

    Azo dyes are used extensively in the textile and dyestuff industries and effluents from these industrial processes are usually resistant to biological treatment. Textile azo dyes with bioaccessible groups such as guaiacol and 2,6-dimethoxyphenol, for lignin-degrading fungus as P. chrysosporium were synthesised.

  1. Biomarkers For Rheumatoid Arthritis In Textile Workers And The ...

    African Journals Online (AJOL)

    Rheumatoid arthritis (RA) is a common systemic chronic inflammatory autoimmune disease of unknown origin. There was an evidence of increased rate of RA in textile workers, and was higher among women. Fifty two textile workers (have worked for more than two years) and sixty two control subjects of both sexes were ...

  2. Interwoven Story: A Narrative Study of Textiles as Educators

    Science.gov (United States)

    Tremblay-Dion, Catherine-Laura

    2017-01-01

    Drawing from both narrative research and Joe Kincheloe's work of research bricolage this study inquired into how textiles have served as educator throughout my life. Weaving, as the earliest and most integral of textile fabrications, is particularly featured in this narrative inquiry. A loom, in its most basic form, consists of three components; a…

  3. Ecological modernisation and institutional transformations in the Danish textile industry

    DEFF Research Database (Denmark)

    Søndergård, Bent; Hansen, Ole Erik; Holm, Jesper

    2004-01-01

    The interplay of environmental regulation programs and environmental transformations in the Danish textile industry is analysed. The result of the interplay is summarised as an ecological modernisation process, which has established distributed environmental competences at enterprises...... and institutional actors in the textile industry, and has established new environmental perceptions and agendas in the industry....

  4. Application of the mixture design to decolourise effluent textile ...

    African Journals Online (AJOL)

    Important pollutants in textile effluents are mainly recalcitrant organics, colours, toxicants and inhibitory compounds, surfactants, chlorinated compounds (AOX), pH and salts. An aerobic system using a continuous stirred bed reactor (SBR) was continuously operated at constant temperature and fed with textile wastewater ...

  5. Environmental assessment of end-of-life textiles in Denmark

    DEFF Research Database (Denmark)

    Koligkioni, Athina; Parajuly, Keshav; Sørensen, Birgitte Lilholt

    2017-01-01

    The European Union is on its way to a circular economy through eco-design, waste prevention, reuse and recycling of products and materials. This study analyzes the environmental effects of end-of-life textile management in Denmark. First, a Mass Flow Analysis was performed for textile flows from...

  6. DETERMINATION OF TRACE HEAVY METALS IN SOME TEXTILE ...

    African Journals Online (AJOL)

    a

    People want to be able to buy clothing, bedding and household textiles that have been tested and are not dyed in any way with harmful substances [6-8]. Textile products contain some organic and inorganic substance including trace metal ions. Especially, reactive and pigment dyes contain trace heavy metals at high level.

  7. Advanced microgel-functionalized polyester textiles adaptive to ambient conditions

    NARCIS (Netherlands)

    Glampedaki, P.

    2011-01-01

    A new approach toward textile-based multi-functional and stimuli-responsive materials is proposed. Polyelectrolyte microgel technology is combined with conventional functionalization methods of photo- and thermo-crosslinking to activate the surface of polyester textiles, making them interactive with

  8. Lithium-Ion Textile Batteries with Large Areal Mass Loading

    KAUST Repository

    Hu, Liangbing

    2011-10-06

    We integrate Li-ion battery electrode materials into a 3D porous textile conductor by using a simple process. When compared to flat metal current collectors, our 3D porous textile conductor not only greatly facilitates the ability for a high active material mass loading on the battery electrode but also leads to better device performance.

  9. 16 CFR 423.6 - Textile wearing apparel.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Textile wearing apparel. 423.6 Section 423.6 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES CARE LABELING OF TEXTILE WEARING APPAREL... the outside of the package or on a hang tag fastened to the product. (b) Care labels must state what...

  10. Stories in the Cloth: Art Therapy and Narrative Textiles

    Science.gov (United States)

    Garlock, Lisa Raye

    2016-01-01

    In this article I weave together the relevance of narrative textile work in therapeutic and human rights contexts; showcase Common Threads, an international nonprofit that uses story cloths with survivors of gender-based violence; outline a master's level art therapy course in story cloths; and relate how textiles helped build a sibling…

  11. Assessing the Suitability of Woven Fabric and Composite Textile ...

    African Journals Online (AJOL)

    This art studio experimental study explored the suitability of woven cotton fabric as alternative material for creating pictorial designs for murals based on the batik, tie-and-dye, screen printing, appliqué and embroidery techniques in textiles. While painted and sculpted murals abound in Ghana, the study found textile murals a ...

  12. Health Care Practices for Medical Textiles in Government Hospitals

    Science.gov (United States)

    Akubue, B. N.; Anikweze, G. U.

    2015-01-01

    The purpose of this study was to investigate the health care practices for medical textiles in government hospitals Enugu State, Nigeria. Specifically, the study determined the availability and maintenance of medical textiles in government hospitals in Enugu State, Nigeria. A sample of 1200 hospital personnel were studied. One thousand two hundred…

  13. Toxicity assessment of treated effluents from a textile industry in ...

    African Journals Online (AJOL)

    Veejay

    Key words: Textile effluent, toxicity, surface waters, growth inhibition, Celosia argentea. INTRODUCTION. Industrial effluents are undesirable by-products of economic development and technological advancement. When improperly disposed off, they imperil human health and the environment. Effluents from textile industries ...

  14. Evaluation of Microbial Systems for Biotreatment of Textile Waste ...

    African Journals Online (AJOL)

    The evaluation of some microbial species for the decolourization and degradation of textile dye has been investigated. Six microbial strains were isolated from soil contaminated with textile waste effluents using the spread plate technique and the isolates were identified as bacterial isolates (Pseudomonas fluorescence, ...

  15. Textile and fashion production skills for sustainable development in ...

    African Journals Online (AJOL)

    Nigeria is a country with abundant wealth in human, cultural and natural resources. It is one country noted for its people's penchant for textiles, fashion and style. On the basis of Nigeria's rich, vibrant and viable traditional textile and fashion industry vis-à-vis the need to keep Niger Delta youths out of violence, this paper this ...

  16. Prevalence of noise induced hearing loss in textile industries in ...

    African Journals Online (AJOL)

    This cross sectional study measured the prevalence of Noise Induced Hearing Loss (NIHL) in textile industries in Dar Es Salaam city and Morogoro municipality. Data were collected from 125 employees randomly selected from each of the textile factory mill in each region through structured questionnaires and audiogram ...

  17. Experimental Studies on Durability of Concrete Using Textile Effluent

    African Journals Online (AJOL)

    An attempt was made to use the waste water from textile industry for construction purpose, so that the shortage in water can be greatly reduced and the waste water can be suitably disposed for safe guarding the environment. The basic properties of the treated and untreated water from the textile industry were tested and the ...

  18. Industrial Design Management: The Focal Development for Textile ...

    African Journals Online (AJOL)

    The Nigerian textiles are on the downward trend for the past ten years. This had been blamed on the importation of second hand clothing and the inability of the textile industry to adjust to the technological growth. This has affected designs, productions, fastness of fabrics and the market forces. This paper suggest possible ...

  19. Development of smart conductive 2D-3D textile grid

    NARCIS (Netherlands)

    Agrawal, P. (Pramod); Bottenberg, E. (Eliza); Brinks, G.J. (Ger); Gooijer, H. (Henk)

    2013-01-01

    The conductive textile grid is a large-scale (226 x 115 cm) multi-layer demonstrator exhibiting different conductive textile materials with certain outputs (such as LEDs, thermo-chromic ink and shape memory alloy) can be connected onto a base conductive fabric. Various conductive materials such as

  20. Antimicrobial Approaches for Textiles: From Research to Market

    Directory of Open Access Journals (Sweden)

    Diana Santos Morais

    2016-06-01

    Full Text Available The large surface area and ability to retain moisture of textile structures enable microorganisms’ growth, which causes a range of undesirable effects, not only on the textile itself, but also on the user. Due to the public health awareness of the pathogenic effects on personal hygiene and associated health risks, over the last few years, intensive research has been promoted in order to minimize microbes’ growth on textiles. Therefore, to impart an antimicrobial ability to textiles, different approaches have been studied, being mainly divided into the inclusion of antimicrobial agents in the textile polymeric fibers or their grafting onto the polymer surface. Regarding the antimicrobial agents, different types have been used, such as quaternary ammonium compounds, triclosan, metal salts, polybiguanides or even natural polymers. Any antimicrobial treatment performed on a textile, besides being efficient against microorganisms, must be non-toxic to the consumer and to the environment. This review mainly intends to provide an overview of antimicrobial agents and treatments that can be performed to produce antimicrobial textiles, using chemical or physical approaches, which are under development or already commercially available in the form of isolated agents or textile fibers or fabrics.

  1. Adapting the Jukun Traditional Symbols for Textile Design and ...

    African Journals Online (AJOL)

    Adapting the Jukun Traditional Symbols for Textile Design and Production. ... Mgbakoigba: Journal of African Studies ... This research work on adaptation of the Jukun cultural symbols for textile design gives a brief introduction of the Jukun people, which are called the “karorofawas” with their rich cultural symbols.

  2. Sustainability Knowledge and Behaviors of Apparel and Textile Undergraduates

    Science.gov (United States)

    Hiller Connell, Kim Y.; Kozar, Joy M.

    2012-01-01

    Purpose: The purpose of this paper is to analyze changes in undergraduate student knowledge of issues of sustainability relevant to the apparel and textiles industry. Assessment occurred prior to and upon completion of a course that addressed topics specific to the global production and distribution of apparel and textile goods. The study also…

  3. Identification and Characterization of Textile Fibers by Thermal Analysis

    Science.gov (United States)

    Gray, Fiona M.; Smith, Michael J.; Silva, Magda B.

    2011-01-01

    Textile fibers are ubiquitous in the sense that they are present in the fabric of clothing, furniture, and floor and wall coverings. A remarkable variety of textile fibers with different chemical compositions are produced for many different commercial applications. As fibers are readily transferred, they are frequently recovered from crime scenes…

  4. Bioremediation of textile effluent polluted soil using kenaf ( Hibiscus ...

    African Journals Online (AJOL)

    This study determined the performance and heavy metals uptake of kenaf at different levels of compost application in textile effluent polluted soil. Polluted soil was collected from the vicinity of a textile company in Nigeria. Twelve-litre plastic pots were filled with 10 kg soil. Soil amendments applied were: 0 (control), 60 Kg N ...

  5. A CROSS SECTIONAL STUDY OF RESP I RATORY CONDITION IN NON TEXTILE AND TEXTILE WORKERS

    Directory of Open Access Journals (Sweden)

    Avinash P.

    2015-02-01

    Full Text Available The purpose of this study was to determine the prevalence of respiratory symptoms among cotton - ginning workers. Byssinosis is a respiratory disease caused by inhalation of cotton dust for prolonged period of time. This is most frequently occurs in the cotton mill workers. The Aim of the study is 1. Determining the proportion of workers experiencing difficulty in breathing, chest tightness, chest pain, coughing, wheezing and phlegm. 2. To evaluate the pulmonary function test variation in textile workers with non - textile workers. The present study was conducted on three groups (I, II, III of male subjects of age ranging 30 to 40 yrs, 41 to 50 yrs & 51 to 60 yrs. And each of the group is divided again into textile workers & non - textile workers. A structured questionnaire enquiring about the respiratory health was administered to the employees. And our result shows the Byssinotic symptoms were too high in cotton mill workers than control group. The pulmonary function test shows a significant reduction in lung capacity, and the mean values of FVC, FEV1, FEV1%, FEF 50%, were on negative side among cotton mill workers compared to control group and which is statistically significant.

  6. The remains of the dam: what have we learned from 15 years of US dam removals?

    Science.gov (United States)

    Gordon E. Grant; Sarah L. Lewis

    2015-01-01

    Important goals for studying dam removal are to learn how rivers respond to large and rapid introductions of sediment, and to develop predictive models to guide future dam removals. Achieving these goals requires organizing case histories systematically so that underlying physical mechanisms determining rates and styles of sediment erosion, transport, and deposition...

  7. Simulating dam - breach flood scenarios of the Tangjiashan landslide dam induced by the Wenchuan earthquake

    NARCIS (Netherlands)

    Fan, Xuanmei; Tang, C.; van Westen, C.J.; Alkema, D.

    2012-01-01

    Floods from failures of landslide dams can pose a hazard to people and property downstream, which have to be rapidly assessed and mitigated in order to reduce the potential risk. The Tangjiashan landslide dam induced by the Mw=7.9 2008 Wenchuan earthquake had impounded the largest lake in the

  8. Project Planning for Cougar Dam during 2010

    Science.gov (United States)

    Haskell, Craig A.; Tiffan, Kenneth F.

    2011-01-01

    Cougar Dam is a 158 m-tall, rock fill dam located about 63 km east of Springfield, Oregon. Completed in 1963, the dam is owned and operated by the U.S. Army Corps of Engineers (USACE). It impounds Cougar Reservoir, which is 9.7 km long, has a surface area of 518 ha, and is predominately used for flood control. The pool elevation typically ranges from a maximum conservation pool of 515 m (1,690 ft) National Geodetic Vertical Datum (NGVD) in summer to a minimum flood control elevation of 467 m (1,532 ft NGVD) in winter. The reservoir thermally stratifies in the summer, has an average depth of 37 m, and holds 153,500 acre-feet when full. Cougar Dam is located on the South Fork of the McKenzie River 7 km upstream from the mainstem McKenzie River, a tributary of the Willamette River. The McKenzie River Basin basin supports the largest remaining population of wild spawning spring Chinook salmon in the Willamette River Basin (National Oceanic and Atmospheric Administration; NOAA, 2008). Cougar Dam and others were collectively deemed to cause jeopardy to the sustainability of anadromous fish stocks in the Willamette River Basin (NOAA, 2008). Prior to dam construction, as many as 805 redds were observed in the South Fork of the McKenzie River (Willis and others, 1960) and it is estimated that 40 km of spawning habitat were lost when access was blocked after dam construction. The 2008 Willamette Biological Opinion (BIOP) requires improvements to operations and structures to reduce impacts on Upper Willamette River (UWR) Chinook salmon (Oncorhynchus tshawytscha) and UWR steelhead (O. mykiss; NOAA, 2008). In 2010, an adult fish collection facility was completed below Cougar Dam to collect returning adult salmon for transport to spawning habitats above the dam. Before that time, returning adult spring Chinook salmon were transported to upstream spawning areas as part of a trap-and-haul program with adults passed ranging annually from 0 to 1,038 (Taylor, 2000). The progeny of

  9. Scalable and Environmentally Benign Process for Smart Textile Nanofinishing.

    Science.gov (United States)

    Feng, Jicheng; Hontañón, Esther; Blanes, Maria; Meyer, Jörg; Guo, Xiaoai; Santos, Laura; Paltrinieri, Laura; Ramlawi, Nabil; Smet, Louis C P M de; Nirschl, Hermann; Kruis, Frank Einar; Schmidt-Ott, Andreas; Biskos, George

    2016-06-15

    A major challenge in nanotechnology is that of determining how to introduce green and sustainable principles when assembling individual nanoscale elements to create working devices. For instance, textile nanofinishing is restricted by the many constraints of traditional pad-dry-cure processes, such as the use of costly chemical precursors to produce nanoparticles (NPs), the high liquid and energy consumption, the production of harmful liquid wastes, and multistep batch operations. By integrating low-cost, scalable, and environmentally benign aerosol processes of the type proposed here into textile nanofinishing, these constraints can be circumvented while leading to a new class of fabrics. The proposed one-step textile nanofinishing process relies on the diffusional deposition of aerosol NPs onto textile fibers. As proof of this concept, we deposit Ag NPs onto a range of textiles and assess their antimicrobial properties for two strains of bacteria (i.e., Staphylococcus aureus and Klebsiella pneumoniae). The measurements show that the logarithmic reduction in bacterial count can get as high as ca. 5.5 (corresponding to a reduction efficiency of 99.96%) when the Ag loading is 1 order of magnitude less (10 ppm; i.e., 10 mg Ag NPs per kg of textile) than that of textiles treated by traditional wet-routes. The antimicrobial activity does not increase in proportion to the Ag content above 10 ppm as a consequence of a "saturation" effect. Such low NP loadings on antimicrobial textiles minimizes the risk to human health (during textile use) and to the ecosystem (after textile disposal), as well as it reduces potential changes in color and texture of the resulting textile products. After three washes, the release of Ag is in the order of 1 wt %, which is comparable to textiles nanofinished with wet routes using binders. Interestingly, the washed textiles exhibit almost no reduction in antimicrobial activity, much as those of as-deposited samples. Considering that a realm

  10. The Total Risk Analysis of Large Dams under Flood Hazards

    Directory of Open Access Journals (Sweden)

    Yu Chen

    2018-02-01

    Full Text Available Dams and reservoirs are useful systems in water conservancy projects; however, they also pose a high-risk potential for large downstream areas. Flood, as the driving force of dam overtopping, is the main cause of dam failure. Dam floods and their risks are of interest to researchers and managers. In hydraulic engineering, there is a growing tendency to evaluate dam flood risk based on statistical and probabilistic methods that are unsuitable for the situations with rare historical data or low flood probability, so a more reasonable dam flood risk analysis method with fewer application restrictions is needed. Therefore, different from previous studies, this study develops a flood risk analysis method for large dams based on the concept of total risk factor (TRF used initially in dam seismic risk analysis. The proposed method is not affected by the adequacy of historical data or the low probability of flood and is capable of analyzing the dam structure influence, the flood vulnerability of the dam site, and downstream risk as well as estimating the TRF of each dam and assigning corresponding risk classes to each dam. Application to large dams in the Dadu River Basin, Southwestern China, demonstrates that the proposed method provides quick risk estimation and comparison, which can help local management officials perform more detailed dam safety evaluations for useful risk management information.

  11. Integrated measure and control system for textile machinery

    Science.gov (United States)

    Liu, Yuantao; Zhao, Jinzhi; Zhao, Zexiang

    2010-12-01

    In this paper, textile mechanical drive control is researched. Textile machinery integrated measure and control system is established. The system is composed of micro-computer, PLC, transducer, implement device, all kinds of detective components and industrial Ethernet etc. Technology of industrial field bus control and Internet technique are applied. The system is on a background of textile production technique, such as spring, woven, chemical fiber, non-woven, dyeing and finishing. A network based open integrated control system is developed. Various characteristics of production technique flow and textile machinery movement discipline are presented. Configuration software is introduced according to user's control tasks. Final remote automatic controls are finished. This may make development cost reduced, and development periods shortened. Some problems in textile machinery development process are solved, which may make transparency factory and remote development realized.

  12. Towards conductive textiles: coating polymeric fibres with graphene.

    Science.gov (United States)

    Neves, Ana I S; Rodrigues, Daniela P; De Sanctis, Adolfo; Alonso, Elias Torres; Pereira, Maria S; Amaral, Vitor S; Melo, Luis V; Russo, Saverio; de Schrijver, Isabel; Alves, Helena; Craciun, Monica F

    2017-06-26

    Conducting fibres are essential to the development of e-textiles. We demonstrate a method to make common insulating textile fibres conductive, by coating them with graphene. The resulting fibres display sheet resistance values as low as 600 Ωsq-1, demonstrating that the high conductivity of graphene is not lost when transferred to textile fibres. An extensive microscopic study of the surface of graphene-coated fibres is presented. We show that this method can be employed to textile fibres of different materials, sizes and shapes, and to different types of graphene. These graphene-based conductive fibres can be used as a platform to build integrated electronic devices directly in textiles.

  13. The Role of Textiles in Dermatitis: An Update.

    Science.gov (United States)

    Mobolaji-Lawal, Motunrayo; Nedorost, Susan

    2015-04-01

    Dermatitis has important implications for individuals who are affected. It can significantly impair function and quality of life. Dermatitis is multi-factorial and often includes elements of atopic dermatitis, allergic contact dermatitis, and irritant contact dermatitis in a co-existent manner. Textiles are in contact with the human skin for extended periods of time and as a result, they are an important part of the cutaneous environment. Thus, it is not surprising that textiles play a major role in both the etiology and the treatment of various types of dermatitis. This review discusses the role of textiles in dermatitis with an emphasis on interesting and recent advances, trends, perspectives, gaps, and conflicts in the field. In addition, we mention other disease processes to be aware of as they can often mimic textile pattern dermatitis. Lastly, we provide a diagnostic approach for patients presenting with textile pattern dermatitis.

  14. Exploring dynamic lighting, colour and form with smart textiles

    Science.gov (United States)

    Cabral, I.; Silva, C.; Worbin, L.; Souto, A. P.

    2017-10-01

    This paper addresses an ongoing research, aiming at the development of smart textiles that transform the incident light that passes through them – light transmittance – to design dynamic light without acting upon the light source. A colour and shape change prototype was developed with the objective of studying textile changes in time; to explore temperature as a dynamic variable through electrical activation of the smart materials and conductive threads integrated in the textile substrate; and to analyse the relation between textile chromic and morphologic behaviour in interaction with light. Based on the experiments conducted, results have highlighted some considerations of the dynamic parameters involved in the behaviour of thermo-responsive textiles and demonstrated design possibilities to create interactive lighting scenarios.

  15. Textile dye degradation using nano zero valent iron: A review.

    Science.gov (United States)

    Raman, Chandra Devi; Kanmani, S

    2016-07-15

    Water soluble unfixed dyes and inorganic salts are the major pollutants in textile dyeing industry wastewater. Existing treatment methods fail to degrade textile dyes and have limitations too. The inadequate treatment of textile dyeing wastewater is a major concern when effluent is directly discharged into the nearby environment. Long term disposal threatens the environment, which needs reclamation. This article reviews the current knowledge of nano zero valent iron (nZVI) technique in the degradation of textile dyes. The application of nZVI on textile dye degradation is receiving great attention in the recent years because nZVI particles are highly reactive towards the pollutant, less toxic, and economical. The nZVI particles aggregate quickly with respect to time and the addition of supports such as resin, nickel, zinc, bentonite, biopolymer, kaolin, rectorite, nickel-montmorillonite, bamboo, cellulose, biochar, graphene, and clinoptilolite enhanced the stability of iron nanoparticles. Inclusion of supports may in turn introduce additional toxic pollutants, hence green supports are recommended. The majority of investigations concluded dye color removal as textile dye compound removal, which is not factual. Very few studies monitored the removal of total organic carbon and observed the products formed. The results revealed that partial mineralization of the textile dye compound was achieved. Instead of stand alone technique, nZVI can be integrated with other suitable technique to achieve complete degradation of textile dye and also to treat multiple pollutants in the real textile dyeing wastewater. It is highly recommended to perform more bench-scale and pilot-scale studies to apply this technique to the textile effluent contaminated sites. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. PRODUCTION WITH 3D PRINTERS IN TEXTILES [REVIEW

    Directory of Open Access Journals (Sweden)

    KESKIN Reyhan

    2015-05-01

    Full Text Available 3D printers are gaining more attention, finding different applications and 3D printing is being regarded as a ‘revolution’ of the 2010s for production. 3D printing is a production method that produces 3-dimensional objects by combining very thin layers over and over to form the object using 3D scanners or via softwares either private or open source. 3D printed materials find application in a large range of fields including aerospace, automotive, medicine and material science. There are several 3D printing methods such as fused deposition modeling (FDM, stereolithographic apparatus (SLA, selective laser sintering (SLS, inkjet 3D printing and laminated object manufacturing (LOM. 3D printing process involves three steps: production of the 3D model file, conversion of the 3D model file into G-code and printing the object. 3D printing finds a large variety of applications in many fields; however, textile applications of 3D printing remain rare. There are several textile-like 3D printed products mostly for use in fashion design, for research purposes, for technical textile applications and for substituting traditional textiles suchas weft-knitted structures and lace patterns. 3D printed textile-like structures are not strong enough for textile applications as they tend to break easily and although they have the drape of a textile material, they still lack the flexibility of textiles. 3D printing technology has to gain improvement to produce materials that will be an equivalent for textile materials, and has to be a faster method to compete with traditional textile production methods.

  17. Surface-Roughness-Based Virtual Textiles: Evaluation Using a Multi-Contactor Display.

    Science.gov (United States)

    Philpott, Matthew; Summers, Ian R

    2015-01-01

    Virtual textiles, generated in response to exploratory movements, are presented to the fingertip via a 24-contactor vibrotactile array. Software models are based on surface-roughness profiles from real textiles. Results suggest that distinguishable "textile-like" surfaces are produced, but these lack the necessary accuracy for reliable matching to real textiles.

  18. A structural lattice model for electronic textile: an experimental and computational study

    NARCIS (Netherlands)

    Verberne, C.W.; Van Os, K.; Luitjens, S.B.

    2011-01-01

    Electronic textiles combine textiles with the functionality of electronic applications.To understand the mechanical issues of reliability, mechanical failure and compatibility of these electronic textiles, research has to be performed that focusses on the interplay of the textile with the electronic

  19. 76 FR 68690 - Rules and Regulations Under the Textile Fiber Products Identification Act

    Science.gov (United States)

    2011-11-07

    ... applicable to written advertising, including Internet advertising; clarify or revise the list of exclusions... Textile Fiber Products Identification Act (``Textile Act''), 15 U.S.C. 70-70k, requires marketers to... Textile Act also contains advertising and record-keeping provisions. Section 7(c) of the Textile Act...

  20. 16 CFR 303.42 - Arrangement of information in advertising textile fiber products.

    Science.gov (United States)

    2010-01-01

    ... textile fiber products. 303.42 Section 303.42 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS RULES AND REGULATIONS UNDER THE TEXTILE FIBER PRODUCTS IDENTIFICATION ACT § 303.42 Arrangement of information in advertising textile fiber products. (a) Where a textile...

  1. 78 FR 52907 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

    Science.gov (United States)

    2013-08-27

    ... IMPLEMENTATION OF TEXTILE AGREEMENTS Determination Under the Textile and Apparel Commercial Availability...'') AGENCY: The Committee for the Implementation of Textile Agreements. ACTION: Determination to add a... Implementation of Textile Agreements (``CITA'') has determined that certain polyester/nylon cut corduroy fabric...

  2. 16 CFR 303.30 - Textile fiber products in form for consumer.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Textile fiber products in form for consumer... CONGRESS RULES AND REGULATIONS UNDER THE TEXTILE FIBER PRODUCTS IDENTIFICATION ACT § 303.30 Textile fiber products in form for consumer. A textile fiber product shall be considered to be in the form intended for...

  3. Modified Polymer Materials for Use in Selected Personal Protective Equipment Products

    OpenAIRE

    Irzmańska Emilia; Brochocka Agnieszka

    2017-01-01

    The paper discusses the methods of modification of melt-blown polymer materials by the addition of a bactericidal agent or superabsorbent directly to the fibre-forming area during the melt-blown production process. It also presents tests of textile composites designed for use in selected types of personal protective equipment worn in the workplace. One example of the application of textile composites is the protective footwear insole. The insole composites contain specially developed variants...

  4. A New ‘T’ for Textiles

    DEFF Research Database (Denmark)

    Earley, Rebecca; Vuletich, Clara; Hadridge, Phil

    2016-01-01

    for Hennes and Mauritz (H&M) and the Sustainable Fashion Academy (SFA) in Stockholm, Sweden. The project was developed as part of the Mistra Future Fashion research consortium, which aims to bring scientists and designers together to find sustainable and profitable industry solutions. The TED’s TEN...... sustainable design strategies for textiles and fashion was the framework for the Sustainable Design Inspiration (SDI) work at H&M – a broad and holistic approach to redesigning products including materials, process, systems, services, consumer behaviour and activism....

  5. From magnetic textiles to micromagnetic simulations

    OpenAIRE

    Ehrmann née Tillmanns, Andrea; Weber, Marcus O.; Kammermeier, Tom; Błachowicz, Tomasz; Pawela, Łukasz; Ehrmann née Tillmanns, Andrea; Weber, Marcus O.; Kammermeier, Tom; Błachowicz, Tomasz; Pawela, Łukasz

    2015-01-01

    Pewne układy magnetyczne, jak warstwy Fe/MnFe2, wykazują nieoczekiwane anizotropie. Podjęto próby odtworzenia tychże zjawisk w układach makroskopowych na bazie materiałów tekstylnych Plakat naukowy Some magnetic systems (e.g. 4-fold Fe/MnF2 thin film samples) show unexpected anisotropies – common simulations not valid, new phenomenological approaches lack support by physics-based simulations. Tailoring magnetic anisotropies by textile processing (weaving, braiding, warp knitting) of mag...

  6. Flexural Behavior of Textile-Reinforced Concrete

    Directory of Open Access Journals (Sweden)

    Volkova Anna

    2016-01-01

    Full Text Available This paper deals with the flexural behaviour of textile-reinforced concrete (TRC. Two samples of TRC made of high strength reinforcing fabrics made of glass and carbon rovings were produced. Three-point bending test was carried out to examine the flexural performance of the developed samples. The maximum flexural strength and reinforcement efficiency were calculated. Experimental results showed that that all types of applied fabric reinforcement contributed to increases strength as compared to nonreinforced concrete. Furthermore, the deformation behavior of reinforced concrete was analyzed. The advantage is in higher residual load-bearing capacity, which allows maintaining the integrity of the structure.

  7. Ice interactions at a dam face

    Energy Technology Data Exchange (ETDEWEB)

    Morse, B.; Morse, J.; Beaulieu, P.; Pratt, Y. [Laval Univ., Quebec City, PQ (Canada). Dept. of Civil Engineering; Stander, E. [State Univ. of New York, Cobleskill College, Cobleskill, NY (United States). Dept. of Natural Sciences; Cote, A.; Tarras, A.; Noel, P. [Hydro-Quebec, Varennes, PQ (Canada). IREQ

    2009-07-01

    This paper reported on a joint research project between Laval University and Hydro-Quebec to study ice forces on dams in an effort to harmonize design criteria and develop mitigation strategies. This paper introduced the project and explored some of the preliminary results of the 2007-2008 field season. Ice displacement, ice stresses and ice forces on the LaGabelle dam were measured at several locations. The paper identified and discussed the complex relationships between data sets and discussed the spatial-temporal variability of the ice forces and its impact on design criteria. The project objective was to develop design criteria for ice forces on dams and to provide a scientific basis for interpreting and harmonizing existing recommended criteria. The methodology and site description were presented. It was concluded that the ice processes in a reservoir near a dam face subject to water fluctuations are quite complex. Therefore, in order to know the real average pressure on the dam, a significant amount of panels are required, having important implications for determining safe design values. 9 refs., 10 figs.

  8. A comparison of reusable and disposable perioperative textiles: sustainability state-of-the-art 2012.

    Science.gov (United States)

    Overcash, Michael

    2012-05-01

    Contemporary comparisons of reusable and single-use perioperative textiles (surgical gowns and drapes) reflect major changes in the technologies to produce and reuse these products. Reusable and disposable gowns and drapes meet new standards for medical workers and patient protection, use synthetic lightweight fabrics, and are competitively priced. In multiple science-based life cycle environmental studies, reusable surgical gowns and drapes demonstrate substantial sustainability benefits over the same disposable product in natural resource energy (200%-300%), water (250%-330%), carbon footprint (200%-300%), volatile organics, solid wastes (750%), and instrument recovery. Because all other factors (cost, protection, and comfort) are reasonably similar, the environmental benefits of reusable surgical gowns and drapes to health care sustainability programs are important for this industry. Thus, it is no longer valid to indicate that reusables are better in some environmental impacts and disposables are better in other environmental impacts. It is also important to recognize that large-scale studies of comfort, protection, or economics have not been actively pursued in the last 5 to 10 years, and thus the factors to improve both reusables and disposable systems are difficult to assess. In addition, the comparison related to jobs is not well studied, but may further support reusables. In summary, currently available perioperative textiles are similar in comfort, safety, and cost, but reusable textiles offer substantial opportunities for nurses, physicians, and hospitals to reduce environmental footprints when selected over disposable alternatives. Evidenced-based comparison of environmental factors supports the conclusion that reusable gowns and drapes offer important sustainability improvements. The benefit of reusable systems may be similar for other reusables in anesthesia, such as laryngeal mask airways or suction canisters, but life cycle studies are needed to

  9. Sediment from hydraulic mining detained by Englebright and small dams in the Yuba basin

    Science.gov (United States)

    James, L. Allan

    2005-10-01

    Recent initiatives to find ways to reintroduce anadromous fish to the Central Valley of California have identified the Yuba River as one of the best potential watersheds for expanding spawning habitat of spring-run chinook salmon and steelhead trout. Salmon spawning in the Yuba River would require substantial modifications or removal of Englebright Dam, a large dam (86 million m3 capacity) built by the U.S. Army Corps of Engineers in 1941. An extensive on-going feasibility study by local, state, and federal organizations, therefore, is examining aspects of various dam-treatment scenarios that range from no action to complete dam removal. This paper examines the extraordinary history of the watershed and resulting conditions pertinent to the feasibility of altering Englebright Dam. It seeks to accomplish four goals. First, historical geomorphic changes in the watershed are outlined that influence the physical context of the feasibility study. The Yuba watershed is centered in the hydraulic gold-mining region made famous by G.K. Gilbert (Gilbert, G.K., 1917. Hydraulic-mining débris in the Sierra Nevada. U.S. Geol. Survey Prof. Paper 105 154 pp.), and Englebright Dam was built as a débris dam to control the sediment from hydraulic mining. Second, recent findings of high concentrations of mercury in sediment and fish tissues in the watershed are briefly reviewed. Much mercury was applied during the 20th century. Third, historic data on 20th century hydraulic mining are presented that document numerous small dams built in the Yuba basin to detain mining sediment. Finally, field measurements of the texture and lithology of modern bed materials in the Yuba River basin are presented that demonstrate reworked sediment from mining is an important component of the modern sediment load and fine spawning gravels. The complex anthropogenic geomorphic changes in the Yuba basin present a challenge with regards to responsible treatment of Englebright Dam. If toxic sediment is

  10. U.S. Clothing and Textile Trade with China and the World: Trends Since the End of Quotas

    Science.gov (United States)

    2007-07-10

    programs are proving beneficial. Programs such as GSP, the Andean Trade Preference Act, and the Carribean Basin Initiative may protect and promote the ...Order Code RL34106 U.S. Clothing and Textile Trade with China and the World: Trends Since the End of Quotas July 10, 2007 Michael F. Martin Analyst... the collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data

  11. A Strategy for Material-specific e-Textile Interaction Design

    DEFF Research Database (Denmark)

    Gowrishankar, Ramyah; Bredies, Katharina; Ylirisku, Salu

    2017-01-01

    The interaction design of e-Textile products are often characterized by conventions adopted from electronic devices rather than developing interactions that can be specific to e-Textiles. We argue that textile materials feature a vast potential for the design of novel digital interactions....... Especially the shape-reformation capabilities of textiles may inform the design of expressive and aesthetically rewarding applications. In this chapter, we propose ways in which the textileness of e-Textiles can be better harnessed. We outline an e-Textile Interaction Design strategy that is based...... on defining the material-specificity of e-Textiles as its ability to deform in ways that match the expectations we have of textile materials. It embraces an open-ended exploration of textile-related interactions (for e.g. stretching, folding, turning-inside-out etc.) and their potential for electronic...

  12. Assessing the physical vulnerability of check dams through an empirical damage index

    Directory of Open Access Journals (Sweden)

    Andrea Dell'Agnese

    2013-06-01

    Full Text Available A comprehensive analysis of flood risk in mountain streams has to include an assessment of the vulnerability of the protection systems, in addition to an assessment of the vulnerability of the constructed environment on alluvial fans and floodplains. Structures forming the protection systems are of a dual nature, i.e. they are designed to mitigate natural process-related hazards and, on the other hand, are prone to be damaged during their lifecycle by the same processes they should mitigate. Therefore, their effectiveness declines over time. Hence, the knowledge of how effectively control structures perform is essential for risk management. A procedure was developed to assess the physical vulnerability of check dams based on empirical evidence collected in South Tyrol, Northern Italy. A damage index defined on pre- and postevent comparisons of check dam conditions was evaluated for 362 structures in 18 mountain streams along with the relevant processes and the structural characteristics affecting it. Although the available dataset did not allow conclusive functional relationships between damage index and impact variables to be established, it was possible to assess the average expected residual functionality of check dams according to structure characteristics, and event type and intensity. These results may help plan appropriate check dam maintenance.

  13. Las emisiones atmosféricas generadas por la industria textil

    OpenAIRE

    Gutiérrez Bouzán, Mª Carmen; Droguet Rifà, Marta; Crespi Rosell, Martin

    2003-01-01

    En este trabajo se clasifican los distintos procesos textiles en 4 categorías, según la contaminación atmosférica que producen y partiendo de la base establecida por la U.S. Environmental Protection Agency: lavado de lana, acabado de la lana, procesado en seco y acabado de hilos y tejidos. Se indican los tipos más frecuentes de contaminación atmosférica producida en cada uno de estos procesos: neblinas de aceites y ácidos, vapores de disolventes, olores y polvo y fibras. Por otra parte, se...

  14. Design of tailing dam using red mud

    Science.gov (United States)

    Rout, Subrat; Sahoo, Tapaswini; Das, Sarat

    2013-06-01

    Red mud, waste industrial product from aluminum industries produced approximately 75 million tonnes every year with less than half of this is used. Storage of this unutilized red mud takes vast tracts of usable land and pollutes, land, air and water. Construction of high embankments, under passes, flyovers, tailing dams uses vast tract of natural resources (top soil) is also matter of concern as its takes thousands of years to form the natural soil. This paper discusses use of red mud for construction of tailing dam based on laboratory findings and finite element analysis. The geotechnical properties such as plasticity, compaction, permeability, shear strength characteristics and dispersion of red mud are presented. Stability and seepage analysis of tailing dams as per finite element analysis using the above geotechnical parameters is presented.

  15. A Mathematical Model for Forecasting the Dam-Break Flood Routing Process of a Landslide Dam

    Directory of Open Access Journals (Sweden)

    Fugang Xu

    2012-01-01

    Full Text Available Once a landslide dam bursts, its reservoir discharges quickly in a flood which will cause catastrophic damage to life and property downstream. For a specific landslide dam, the peak flow rate and the evolution of downstream flood are influenced by the shape and size of the dike breach when dam-break occurs. According to the general nature of landslide dams and field observations of dike-breach development patterns, a dike-breach propagation mode has been determined. By combining an improved empirical equation with knowledge of the dike-breach propagation mode, a mathematical model for forecasting dam-break flood routing has been developed and is presented here. Sensitivity analysis was then carried out based on the computed results for peak flow rate and the flood evolution curve under different parameters. The computed results showed that the width coefficient and the depth coefficient had similar effects on the dam-break flood but that the impact of the depth coefficient was more significant than that of the width coefficient. Finally, the proposed model was used to calculate the flood evolution for the Tangjiashan landslide dam. The computed results showed that the error between the simulated result and the measured data was less than 5%.

  16. Seismic response of concrete gravity dam reinforced with FRP sheets on dam surface

    Directory of Open Access Journals (Sweden)

    Hong Zhong

    2013-10-01

    Full Text Available This paper aims at exploring the effects of anti-seismic reinforcement with the fiber-reinforced polymer (FRP material bonded to the dam surface in dam engineering. Time-history analysis was performed to simulate the seismic failure process of a gravity dam that was assumed to be reinforced at the locations of slope discontinuity at the downstream surface, part of the upstream face, and the dam heel. A damage model considering the influence of concrete heterogeneity was used to model the nonlinearity of concrete. A bond-slip model was applied to the interface between FRP and concrete, and the reinforcement mechanism was analyzed through the bond stress and the stress in FRP. The results of the crack pattern, displacement, and acceleration of the reinforced dam were compared with those of the original one. It is shown that FRP, as a reinforcement material, postpones the occurrence of cracks and slows the crack propagation, and that cracks emanating from the upstream surface and downstream surface are not connected, meaning that the reinforced dam can retain water-impounding function when subjected to the earthquake. Anti-seismic reinforcement with FRP is therefore beneficial to improving the seismic resistant capability of concrete dams.

  17. Nanopatterned textile-based wearable triboelectric nanogenerator.

    Science.gov (United States)

    Seung, Wanchul; Gupta, Manoj Kumar; Lee, Keun Young; Shin, Kyung-Sik; Lee, Ju-Hyuck; Kim, Tae Yun; Kim, Sanghyun; Lin, Jianjian; Kim, Jung Ho; Kim, Sang-Woo

    2015-01-01

    Here we report a fully flexible, foldable nanopatterned wearable triboelectric nanogenerator (WTNG) with high power-generating performance and mechanical robustness. Both a silver (Ag)-coated textile and polydimethylsiloxane (PDMS) nanopatterns based on ZnO nanorod arrays on a Ag-coated textile template were used as active triboelectric materials. A high output voltage and current of about 120 V and 65 μA, respectively, were observed from a nanopatterned PDMS-based WTNG, while an output voltage and current of 30 V and 20 μA were obtained by the non-nanopatterned flat PDMS-based WTNG under the same compressive force of 10 kgf. Furthermore, very high voltage and current outputs with an average value of 170 V and 120 μA, respectively, were obtained from a four-layer-stacked WTNG under the same compressive force. Notably it was found there are no significant differences in the output voltages measured from the multilayer-stacked WTNG over 12 000 cycles, confirming the excellent mechanical durability of WTNGs. Finally, we successfully demonstrated the self-powered operation of light-emitting diodes, a liquid crystal display, and a keyless vehicle entry system only with the output power of our WTNG without any help of external power sources.

  18. NONWOVEN TEXTILES WITH MEDICAL DESTINATION ROMANIAN PRODUCTION

    Directory of Open Access Journals (Sweden)

    BULACU Romulus

    2015-05-01

    Full Text Available The widest range of medical disposable from nonwoven textiles are: absorbent and hygiene products : (diapers, feminine care, incontinence from the layered structures absorbent or impervious; use products such as hospital operating theaters sterile clothing (caps, gowns, masks, shoe coverings, materials for field operators, lab coats, packaging materials for hot or cold treatments, sterile materials (wipes, bandages, sterile bandages, etc.. Currently these materials, in their majority, are imported. This paper presents research done for getting, with the country equipment, disposable medical products from 40 g/m2 nonwoven textile materials. The technology adopted for the purpose, in SC "Minet" S.A. Ramnicu Valcea, Romania consisted of the following steps:Carding - folding, the aggregate Spinnbau-Hergeth type, Germany, with major changes carding technology adjustment and folding, to obtain a fibrous layer with a mass per unit surface of about 40-50 g / m2 and a width of 2,1 m;Pre-heat consolidation by pre-heating required only to ensure product stability required minimal interphase transport to final consolidation. Final thermal consolidation of the fibrous layer by thermal calendering at a temperature of 110°C and calenders cylinder speed of 2 m / min. The processing of the fiber by carding - folding and preliminary thermally consolidation and final by calendering.

  19. Plasma Sterilization: New Epoch in Medical Textiles

    Science.gov (United States)

    Senthilkumar, P.; Arun, N.; Vigneswaran, C.

    2015-04-01

    Clothing is perceived to be second skin to the human body since it is in close contact with the human skin most of the times. In hospitals, use of textile materials in different forms and sterilization of these materials is an essential requirement for preventing spread of germs. The need for appropriate disinfection and sterilization techniques is of paramount importance. There has been a continuous demand for novel sterilization techniques appropriate for use on various textile materials as the existing sterilization techniques suffer from various technical and economical drawbacks. Plasma sterilization is the alternative method, which is friendlier and more effective on the wide spectrum of prokaryotic and eukaryotic microorganisms. Basically, the main inactivation factors for cells exposed to plasma are heat, UV radiation and various reactive species. Plasma exposure can kill micro-organisms on a surface in addition to removing adsorbed monolayer of surface contaminants. Advantages of plasma surface treatment are removal of contaminants from the surface, change in the surface energy and sterilization of the surface. Plasma sterilization aims to kill and/or remove all micro-organisms which may cause infection of humans or animals, or which can cause spoilage of foods or other goods. This review paper emphasizes necessity for sterilization, essentials of sterilization, mechanism of plasma sterilization and the parameters influencing it.

  20. Tubular Steel Arch Stabilized by Textile Membranes

    Directory of Open Access Journals (Sweden)

    Ondrej Svoboda

    2016-10-01

    Full Text Available Tubular steel arch supporting textile membrane roofing is investigated experimentally and numerically. The stabilization effects of the textile membrane on in-plane and out-of-plane behavior of the arch is of primary interest. First a model of a large membrane structure tested in laboratory is described. Prestressed membranes of PVC coated polyester fabric Ferrari® Précontraint 702S were used as a currently standard and excellent material. The test arrangement, loading and resulting load/deflection values are presented. The supporting structure consisted of two steel arch tubes, outer at edge of the membrane and inner supporting interior of the membrane roofing. The stability and strength behavior of the inner tube under both symmetrical and asymmetrical loading was monitored and is shown in some details. Second the SOFiSTiK software was employed to analyze the structural behavior in 3D, using geometrically nonlinear analysis with imperfections (GNIA. The numerical analysis, FE mesh sensitivity, the membrane prestressing and common boundary conditions are validated by test results. Finally a parametrical study concerning stability of mid arch with various geometries in a membrane structure with several supporting arches is presented, with recommendations for a practical design.

  1. Nanomaterials for Functional Textiles and Fibers

    Science.gov (United States)

    Rivero, Pedro J.; Urrutia, Aitor; Goicoechea, Javier; Arregui, Francisco J.

    2015-12-01

    Nanoparticles are very interesting because of their surface properties, different from bulk materials. Such properties make possible to endow ordinary products with new functionalities. Their relatively low cost with respect to other nano-additives make them a promising choice for industrial mass-production systems. Nanoparticles of different kind of materials such as silver, titania, and zinc oxide have been used in the functionalization of fibers and fabrics achieving significantly improved products with new macroscopic properties. This article reviews the most relevant approaches for incorporating such nanoparticles into synthetic fibers used traditionally in the textile industry allowing to give a solution to traditional problems for textiles such as the microorganism growth onto fibers, flammability, robustness against ultraviolet radiation, and many others. In addition, the incorporation of such nanoparticles into special ultrathin fibers is also analyzed. In this field, electrospinning is a very promising technique that allows the fabrication of ultrathin fiber mats with an extraordinary control of their structure and properties, being an ideal alternative for applications such as wound healing or even functional membranes.

  2. Long term respiratory health effects in textile workers

    Science.gov (United States)

    Lai, Peggy S.; Christiani, David C.

    2013-01-01

    Purpose of review Over 60 million people worldwide work in the textile or clothing industry. Recent studies have recognized the contribution of workplace exposures to chronic lung diseases, in particular chronic obstructive pulmonary disease (COPD). Early studies in textile workers have focused on the relationship between hemp or cotton dust exposure and the development of a syndrome termed Byssinosis. The purpose of this review is to evaluate the effect of long term exposure to organic dust in textile workers on chronic respiratory disease in the broader context of disease classifications such as reversible or irreversible obstructive lung disease (i.e. asthma or COPD), and restrictive lung disease. Recent findings Cessation of exposure to cotton dusts leads to improvement in lung function. Recent animal models have suggested a shift in the lung macrophage:dendritic cell population as a potential mechanistic explanation for persistent inflammation in the lung due to repeated cotton-dust related endotoxin exposure. Other types of textile dust, such as silk, may contribute to COPD in textile workers. Summary Textile dust related obstructive lung disease has characteristics of both asthma and COPD. Significant progress has been made in the understanding of chronic lung disease due to organic dust exposure in textile workers. PMID:23361196

  3. A wearable tracking device inkjet-printed on textile

    KAUST Repository

    Krykpayev, Bauyrzhan

    2017-05-20

    Despite the abundance of localization applications, the tracking devices have never been truly realized in E-textiles. Standard printed circuit board (PCB)-based devices are obtrusive and rigid and hence not suitable for textile based implementations. An attractive option would be direct printing of circuit layout on the textile itself, negating the use of rigid PCB materials. However, high surface roughness and porosity of textiles prevents efficient and reliable printing of electronics on textile. In this work, by printing an interface layer on the textile first, a complete localization circuit integrated with an antenna has been inkjet-printed on the textile for the first time. Printed conductive traces were optimized in terms of conductivity and resolution by controlling the number of over-printed layers. The tracking device determines the wearer\\'s position using WiFi and this information can be displayed on any internet-enabled device, such as smart phone. The device is compact (55mm×45mm) and lightweight (22g with 500mAh battery) for people to comfortably wear it and can be easily concealed in case discretion is required. The device operates at 2.4GHz communicated up to a distance of 55m, with localization accuracy of up to 8m.

  4. Perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) contamination from textiles.

    Science.gov (United States)

    Supreeyasunthorn, Phenpimuk; Boontanon, Suwanna K; Boontanon, Narin

    2016-01-01

    The goals of this study were to determine the concentrations of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) in textiles and to determine PFOS and PFOA contamination in textile washing water. Quantification analysis was performed by high performance liquid chromatography coupled with tandem mass spectrometry. Analysis of 32 textile samples by methanol extraction revealed that the average concentrations of PFOS and PFOA were 0.18 µg m(-2) (0.02 to 0.61 µg m(-2)) and 2.74 µg m(-2) (0.31 to 14.14 µg m(-2)), respectively. Although the average concentration of PFOS found in textile samples was below European Union (EU) Commission regulations (textile samples had PFOA concentrations exceeding 1 µg m(-2). Thus, based on these results, the concentration of PFOA in products should also be regulated. Experiments on PFOS and PFOA leaching into washing water were conducted. The maximum concentrations of PFOS and PFOA were measured after the first washing; the concentrations gradually decreased with each subsequent washing. PFOS and PFOA migrated from textiles and were released into the environment, with disappearance percentages of 29.8% for PFOS and 99% for PFOA. The data presented in this study showed that textiles could be a significant direct and indirect source of PFOS and PFOA exposure for both humans and the environment.

  5. Electric energy consumption in the cotton textile processing stages

    Energy Technology Data Exchange (ETDEWEB)

    Palamutcu, S. [Textile Engineering Department, Pamukkale University, Engineering Faculty, 20070 Kinikli, Denizli (Turkey)

    2010-07-15

    Electric energy is one of the primary energy sources consumpted in cotton textile processing. Current energy cost rate is reported about 8-10% in the total production cost of an ordinary textile product manufactured in Turkey. Significantly important share of this energy cost is electric energy. The aim of this paper was to investigate unit electric energy consumption of cotton textile processing stages using real-time measurements method. Actual and estimated Specific Energy Consumption (SEC) values for electric energy was calculated in the cotton textile processing stages of spinning, warping-sizing, weaving, wet processing and clothing manufacturing. Actual electric energy consumption data are gathered from monthly records of the involved plant managements. Estimated electric energy consumption data is gathered through on-site measurement. Actual and estimated electric energy consumption data and monthly production quantities of the corresponding months are used to facilitate specific electric energy consumption of the plants. It is found that actual electric energy consumption amount per unit textile product is higher than the estimated electric energy consumption amount per unit textile product of each involved textile processing stages. (author)

  6. Dermal exposure potential from textiles that contain silver nanoparticles

    Science.gov (United States)

    Stefaniak, Aleksandr B; Duling, Mathew G; Lawrence, Robert B; Thomas, Treye A; LeBouf, Ryan F; Wade, Eleanor E; Abbas Virji, M

    2014-01-01

    Background: Factors that influence exposure to silver particles from the use of textiles are not well understood. Objectives: The aim of this study was to evaluate the influence of product treatment and physiological factors on silver release from two textiles. Methods: Atomic and absorbance spectroscopy, electron microscopy, and dynamic light scattering (DLS) were applied to characterize the chemical and physical properties of the textiles and evaluate silver release in artificial sweat and saliva under varying physiological conditions. One textile had silver incorporated into fiber threads (masterbatch process) and the other had silver nanoparticles coated on fiber surfaces (finishing process). Results: Several complementary and confirmatory analytical techniques (spectroscopy, microscopy, etc.) were required to properly assess silver release. Silver released into artificial sweat or saliva was primarily in ionic form. In a simulated “use” and laundering experiment, the total cumulative amount of silver ion released was greater for the finishing process textile (0.51±0.04%) than the masterbatch process textile (0.21±0.01%); P<0.01. Conclusions: We found that the process (masterbatch vs finishing) used to treat textile fibers was a more influential exposure factor than physiological properties of artificial sweat or saliva. PMID:25000110

  7. Study on dynamic anti-sliding stability of a high gravity dam considering complex dam foundation

    Directory of Open Access Journals (Sweden)

    Deng-hong CHEN

    2011-06-01

    Full Text Available There existed some limitations when analyzing the anti-sliding seismic stability of dam-foundation system by traditional pseudo-static method and response spectrum method. The dynamic strength reduction method was used to study on the deep anti-sliding stability of a high gravity dam considering complex dam foundation under strong earthquake-induced ground action. The static analysis was firstly carried out by reducing the shear strength parameters of the dam foundation’s rock mass with equal proportion. Then, the time-history seismic analysis was carried out based on the static analysis. It was proposed as one of dynamic instability criterions that the peak values of the dynamic displacements and plastic strain energy change suddenly with increasing strength reduction coefficient. The elasto-plastic behavior of the dam foundation was idealized using Drucker–Prager yield criterion based on associated flow rule assumption. Through the static, dynamic strength reduction analysis and dynamic linear elastic analysis of the overflow dam monolith of a high gravity dam, the results’ reliability of elastic-plastic time history analysis was confirmed. The results also showed that the rock mass strength of the high gravity dam foundation has higher strength reserve coefficient. The instability criterions of dynamic strength reduction method proposed were feasible. Although the static anti-slide analysis methods and standards of gravity dam based on the numerical methods are being discussed at present, the dynamic calculation method and instability criterions proposed in this paper would provide some meaningful suggestions for the dynamic analysis of the similar projects.

  8. Lac Courte Oreilles Hydro Dam Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Weaver, Jason [Lac Courte Oreilles, Hayward, WI (United States); Meyers, Amy [Kiser Hydro, LLC, Norway, MI (United States)

    2014-12-31

    The main objective of this project was to investigate upgrading the existing hydro power generating system at the Winter Dam. The tribe would like to produce more energy and receive a fair market power purchase agreement so the dam is no longer a drain on our budget but a contributor to our economy. We contracted Kiser Hydro, LLC Engineering for this project and received an engineering report that includes options for producing more energy with cost effective upgrades to the existing turbines. Included in this project was a negotiation of energy price sales negotiations.

  9. Computational Aspects of Dam Risk Analysis: Findings and Challenges

    Directory of Open Access Journals (Sweden)

    Ignacio Escuder-Bueno

    2016-09-01

    Full Text Available In recent years, risk analysis techniques have proved to be a useful tool to inform dam safety management. This paper summarizes the outcomes of three themes related to dam risk analysis discussed in the Benchmark Workshops organized by the International Commission on Large Dams Technical Committee on “Computational Aspects of Analysis and Design of Dams.” In the 2011 Benchmark Workshop, estimation of the probability of failure of a gravity dam for the sliding failure mode was discussed. Next, in 2013, the discussion focused on the computational challenges of the estimation of consequences in dam risk analysis. Finally, in 2015, the probability of sliding and overtopping in an embankment was analyzed. These Benchmark Workshops have allowed a complete review of numerical aspects for dam risk analysis, showing that risk analysis methods are a very useful tool to analyze the risk of dam systems, including downstream consequence assessments and the uncertainty of structural models.

  10. National Inventory of Dams Coastal California Extract 2010

    Data.gov (United States)

    California Department of Resources — The National Inventory of Dams (NID) is a congressionally authorized database, which documents dams in the U.S. and its territories. The NID was most recently...

  11. Dam-Break Flood Analysis Upper Hurricane Reservoir, Hartford, Vermont

    National Research Council Canada - National Science Library

    Acone, Scott

    1995-01-01

    .... Various dam break flood conditions were modeled and inundation maps developed. Based on this analysis the dam is rated a Class 2 or significant hazard category in terms of its potential to cause downstream damage...

  12. Inventory of Dams in the State of Iowa

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — Permitted dams in Iowa and associated attributes, as recorded by the Floodplain Section of the DNR. The dams regulated are those with the parameters listed below: a....

  13. Blue and grey water footprint of textile industry in China.

    Science.gov (United States)

    Wang, Laili; Ding, Xuemei; Wu, Xiongying

    2013-01-01

    Water footprint (WF) is a newly developed idea that indicates impacts of freshwater appropriation and wastewater discharge. The textile industry is one of the oldest, longest and most complicated industrial chains in the world's manufacturing industries. However, the textile industry is also water intensive. In this paper, we applied a bottom-up approach to estimate the direct blue water footprint (WFdir,blue) and direct grey water footprint (WFdir,grey) of China's textile industry at sector level based on WF methodology. The results showed that WFdir,blue of China's textile industry had an increasing trend from 2001 to 2010. The annual WFdir,blue surpassed 0.92 Gm(3)/yr (giga cubic meter a year) since 2004 and rose to peak value of 1.09 Gm(3)/yr in 2007. The original and residuary WFdir,grey (both were calculated based on the concentration of chemical oxygen demand (CODCr)) of China's textile industry had a similar variation trend with that of WFdir,blue. Among the three sub-sectors of China's textile industry, the manufacture of textiles sector's annual WFdir,blue and WFdir,grey were much larger than those of the manufacture of textile wearing apparel, footware and caps sector and the manufacture of chemical fibers sector. The intensities of WFdir,blue and WF(res)dir,grey of China's textile industry were year by year decreasing through the efforts of issuing restriction policies on freshwater use and wastewater generation and discharge, and popularization of water saving and wastewater treatment technologies.

  14. Investigation on the Causes of Cracking in Earth Dams (Case study: Mahmood-Abad Earth Dam

    Directory of Open Access Journals (Sweden)

    H. Rahimi

    2016-09-01

    Full Text Available Introduction: Cracking of earth dams is a one of the main threat causes of stability of embankment dams. In this research by modeling of the behavior of an embankment dam and employing conditions of the earthquake, the reasons of cracking were inspected using by modeling of earth dam behavior. Based on the literature, one of the main causes of dam failures is sliding and cracking of the dam structure during earthquake. Localized liquefaction of foundation soils was one of the causes of the observed post-earthquake distress within these dams. Material and Methods: In order to study the causes and the results of crack on earth dams, Mahmoodabad earthen dam with a height of 19 m, is located in Zanjan province, northwest of Iran, which suffered a longitudinal crack on the crest and slight sliding of the upstream slope due to 2001 Avaj earthquake was studied. This dam has faced earthquake two times with an interval of two years. During the first earthquake with the magnitude about 6.6 in Richter scale small longitudinal cracks had created on the crest. The developed cracks had been repaired by injecting the cement and then has been hidden by passing the time. After the second earthquake with the magnitude about 6.5 in Richter scale the hidden cracks had been appeared again and the slight movement of the upper slopes of dam reported. Based on the site investigation and documented information about dam, including maps and parameter data, the behavior of the dam has modeled by using Plaxis as a finite element model. In order to check the accuracy of the design of dam, the stability analysis has been conducted using by Xslope as a limit equilibrium model. The foundation conditions and the Geotechnical properties of the layer beneath the dam has been inspected by open excavation. Results and Discussion: Underground investigation about Geotechnical properties of dam foundation has showed that there is a thin sandy layer confined in alluvium material of the

  15. Dams and transnational advocacy: Political opportunities in transnational collective action

    Science.gov (United States)

    Fu, Teng

    Possible arguments to explain the gradual decline in big dam development and its site transferring from developed to developing countries include technical, economic, and political factors. This study focuses on the political argument---the rise of transnational anti-dam advocacy and its impact on state policy-making. Under what conditions does transnational anti-dam advocacy matter? Under what conditions does transnational advocacy change state dam policies (delay, scale down, or cancel)? It examines the role of transnational anti-dam actors in big dam building in a comparative context in Asia. Applying the social movement theory of political opportunity structure (POS) and using the qualitative case-study method, the study provides both within-case and cross-case analyses. Within-case analysis is utilized to explain the changing dynamics of big dam building in China (Three Gorges Dam and proposed Nu/Salween River dam projects), and to a lesser extent, Sardar Sarovar Project in India and Nam Theun 2 Dam in Laos. Different domestic and international POS (DPOS and IPOS) impact the strategies and outcomes of anti-dam advocacies in these countries. The degree of openness of the POS directly affects the capacity of transnational efforts in influencing state dam policies. The degree of openness or closure is measured by specific laws, institutions, discourse, or elite allies (or the absence of these) for the participation of non-state actors on big dam issues at a particular moment. This degree of openness is relative, varying over time, across countries and regions. This study finds that the impact of transnational anti-dam activism is most effective when both DPOS and IPOS are relatively open. Transnational anti-dam advocacy is least effective in influencing state dam policies when both DPOS and IPOS are relatively closed. Under a relatively open DPOS and closed IPOS, transnational anti-dam advocacy is more likely to successfully change state dam policies and even

  16. Trend analysis in water quality of Al-Wehda Dam, north of Jordan.

    Science.gov (United States)

    Al-Taani, Ahmed A

    2014-10-01

    Temporal status and trends in water quality of Al-Wehda Dam, Jordan, from 2006 to 2012 indicate that the dam is subject to a combination of impacts from rainstorm and agricultural runoffs. It also revealed that mineral dissolution, sediment load, rainfall events, evaporation, and water-level fluctuation are the major contributors to variations in water quality. The water chemistry of the impounded Al-Wehda Reservoir showed that Na, Ca, Mg, HCO₃, and Cl are the principal ions, reflecting the dominance of carbonate weathering, with some contribution of silicates. The pH values showed a cyclic pattern with highest values observed in the spring seasons. Total dissolved solids (TDS), Ca, Mg, and HCO₃ are primarily related to leaching and evaporation, with elevated levels that occurred in the rainy winter months. In contrast, seasonal patterns in Na, K, Cl, and NH₄-N contents showed decreased values in winter. Peaks in NO₃-N observed in winter are strongly associated with agricultural runoff. Fluctuations in chlorophyll-a level were coincided with low ratio of total nitrogen (TN) to total phosphorus (TP). Seasonal variations in organic matter content were also apparent, with peaks that generally occurred in spring through early fall corresponding with high algal growth. On an annual basis, the vast majority of water quality data have generally declined, particularly, in 2011. However, it is not clear whether these decreases are related to change in management practices within the Yarmouk basin, or protective measures have been implemented. Comparison of in-lake and post-dam water quality from 2009 to 2011 showed variation in concentrations, where Ca, HCO₃, NO₃-N, Mg, and TDS showed relatively greater post-dam values than in-lake water, whereas pH, Na, Cl, K, COD, BOD₅, and chlorophyll-a were consistently lower in post-dam water. This comparison emphasizes the importance of self-purification capacity of Al-Wehda Dam in reducing some contaminants.

  17. The future role of dams in the United States of America

    Science.gov (United States)

    Ho, Michelle; Lall, Upmanu; Allaire, Maura; Devineni, Naresh; Kwon, Hyun Han; Pal, Indrani; Raff, David; Wegner, David

    2017-02-01

    xml:id="wrcr22481-sec-1001" numbered="no">Storage and controlled distribution of water have been key elements of a human strategy to overcome the space and time variability of water, which have been marked by catastrophic droughts and floods throughout the course of civilization. In the United States, the peak of dam building occurred in the mid-20th century with knowledge limited to the scientific understanding and hydrologic records of the time. Ecological impacts were considered differently than current legislative and regulatory controls would potentially dictate. Additionally, future costs such as maintenance or removal beyond the economic design life were not fully considered. The converging risks associated with aging water storage infrastructure and uncertainty in climate in addition to the continuing need for water storage, flood protection, and hydropower result in a pressing need to address the state of dam infrastructure across the nation. Decisions regarding the future of dams in the United States may, in turn, influence regional water futures through groundwater outcomes, economic productivity, migration, and urban growth. We advocate for a comprehensive national water assessment and a formal analysis of the role dams play in our water future. We emphasize the urgent need for environmentally and economically sound strategies to integrate surface and groundwater storage infrastructure in local, regional, and national water planning considerations. A research agenda is proposed to assess dam failure impacts and the design, operation, and need for dams considering both paleo and future climate, utilization of groundwater resources, and the changing societal values toward the environment.

  18. Northwest Montana Wildlife Mitigation Habitat Protection : Advance Design : Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Wood, Marilyn A.

    1993-02-01

    This report summarizes the habitat protection process developed to mitigate for certain wildlife and wildlife habitat losses due to construction of Hungry Horse and Libby dams in northwestern Montana.

  19. Finite element based micro-mechanics modeling of textile composites

    Science.gov (United States)

    Glaessgen, E. H.; Griffin, O. H., Jr.

    1995-01-01

    Textile composites have the advantage over laminated composites of a significantly greater damage tolerance and resistance to delamination. Currently, a disadvantage of textile composites is the inability to examine the details of the internal response of these materials under load. Traditional approaches to the study fo textile based composite materials neglect many of the geometric details that affect the performance of the material. The present three dimensional analysis, based on the representative volume element (RVE) of a plain weave, allows prediction of the internal details of displacement, strain, stress, and failure quantities. Through this analysis, the effect of geometric and material parameters on the aforementioned quantities are studied.

  20. The Potential of Improving Medical Textile for Cutaneous Diseases

    Science.gov (United States)

    Radu, C. D.; Cerempei, A.; Salariu, M.; Parteni, O.; Ulea, E.; Campagne, Chr

    2017-10-01

    The paper dwells on the prospect of medical textiles designed to release a drug/active principle to the dermis of patients suffering from cutaneous disease (allergic dermatitis, psoriasis, bacterial/infectious conditions and inflammatory conditions). The paper is an overview of general and experimental data from textile applications. An adequate medical textile may have a cellulosic structure, mainly knitted cotton fabric. In special cases, one may use woven fabric for multilayer drug-releasing systems. As far as controlled release systems are concerned, we carried out a critical comparison between the systems described in literature and our experimental findings as concerns cyclodextrin, hydrogel, film charged with active principles and multilayer system.

  1. Stimuli-responsive Hydrogels for Textile Functionalisation: A Review

    Directory of Open Access Journals (Sweden)

    Štular Danaja

    2017-06-01

    Full Text Available This article reviews hydrogels used for the functionalisation of textile materials. Hydrogels are reviewed according to their reason for incorporation, aspects of crosslinking, stimuli-responsive characteristics and particle size. A more in-depth focus on the effect of hydrogel particle size is provided, where macrogels, microgels and nanogels for textile functionalisation are considered. The advantages and disadvantages of each size group are presented. Furthermore, the correlation between synthesis conditions and the sizes of hydrogel particles is discussed, in addition to the applications of macro-, micro- and nanogels to textile materials and their intended uses.

  2. MUSEOS TEXTILES EN CANADÁ, GUATEMALA Y MÉXICO

    Directory of Open Access Journals (Sweden)

    Francisco López Ruiz

    2012-01-01

    Full Text Available Los productos textiles no suelen ser protagónicos en las prácticas museográficas tradicionales; se les considera objetos decorativos, piezas de arte popular o elementos etnográficos, pero generalmente apoyan discursos de otras tipologías museales, más convencionales y establecidas. Por ello, este texto compara los fondos y los sistemas expositivos de tres instituciones dedicadas exclusivamente al objeto textil: el Textile Museum of Canada (fundado en Toronto en 1975; el Museo Ixchel del Traje Indígena (inaugurado en Guatemala en 1977; y el Museo Textil de Oaxaca (abierto al público en 2008. Se propone que los museos textiles son entidades híbridas y sugerentes, con frágiles acervos que requieren soluciones museográficas provenientes de la antropología, la historia del arte occidental “culta” y las artes populares. Si bien el discurso curatorial de los museos textiles ha sido relativamente periférico, también es polivalente: (reafirma identidades nacionales, pero construye nuevas visiones —más incluyentes— de diversidad cultural. Textile artifacts are not central devices in generalized curatorial practices: even if these objects might be considered simultaneously as decorative items, popular art pieces or ethnographical resources, they are certainly not independent from more traditionalist and established kinds of exhibits. For those reasons, this article will compare the collections and displays of three important institutions exclusively related to textile artifacts: the Textile Museum of Canada (inaugurated in Toronto in 1975; the Museum Ixchel of the Indigenous Garment (opened to the public in 1977 in Guatemala; and the Museum Textil of Oaxaca, Mexico (founded in 2008. Some institutional, architectonical and technical aspects of these three museums will be compared. The article will suggest some patrimonial possibilities latent in textile museums, according to their precise typological traits, with the main idea that

  3. Study of energy optimization in textile sector; Estudo de otimizacao energetica setorial textil

    Energy Technology Data Exchange (ETDEWEB)

    Simoes, N.W.B.; Camargos, J.O. [Companhia Energetica de Minas Gerais (CEMIG), Belo Horizonte, MG (Brazil); Morais, F.M. de; Mattos Silva, E. de [Centro de Apoio a Pequena e Media Empresa, Belo Horizonte, MG (Brazil)

    1990-12-31

    This paper presents the results of a study carried by CEMIG (electric power public utility of Minas Gerais state) and CEAG (support center for the medium and small company of Minas Gerais State) on the energy optimization in the textile sector. The main results were the following: characterization of the sector`s productive process; consumption distribution of electric power and alternative sources of energy; specific consumptions; recommendations for energy conservation and technologic situation of the sector. 11 refs., 4 tabs

  4. Diagnosis of embankment dam distresses using Bayesian networks. Part I. Global-level characteristics based on a dam distress database

    National Research Council Canada - National Science Library

    Zhang, L. M; Xu, Y; Jia, J. S; Zhao, C

    2011-01-01

    .... The main objective of this paper is to develop a robust probability-based tool using Bayesian networks for the diagnosis of embankment dam distresses at the global level based on past dam distress data...

  5. Major dams of the United States, Geographic NAD83, USGS (2006) [dams00x020_USGS_2006

    Data.gov (United States)

    Louisiana Geographic Information Center — This map layer portrays major dams of the United States, including Puerto Rico and the U.S. Virgin Islands. The map layer was created by extracting dams 50 feet or...

  6. How to manage the cumulative flood safety of catchment dams ...

    African Journals Online (AJOL)

    Dam safety is a significant issue being taken seriously worldwide. However, in Australia, although much attention is being devoted to the medium- to large-scale dams, minimal attention is being paid to the serious potential problems associated with smaller dams, particularly the potential cumulative safety threats they pose ...

  7. INTRODUCTION All earth dams in their natural state experience ...

    African Journals Online (AJOL)

    INTRODUCTION. All earth dams in their natural state experience some degree of seepage and spillage flow from the reservoir and through permeable soils. Seepage and spillage may also be associated with internal erosion in the dam, and internal erosion is one of the main reasons for dam failures (Sjodahl, 2006).

  8. SEISMIC RESPONSE OF DAM WITH SOIL-STRUCTURE INTERACTION.

    Science.gov (United States)

    Bycroft, G.N.; Mork, P.N.

    1987-01-01

    An analytical solution to the response of a long trapezoidal-section dam on a foundation consisting of an elastic half-space and subjected to simulated earthquake motion is developed. An optimum seismic design is achieved when the cross section of the dam is triangular. The effect of soil structure interaction is to lower the strain occurring in the dam.

  9. Earthquake induced liquefaction analysis of Tendaho earth-fill dam ...

    African Journals Online (AJOL)

    fill dam, which is part of Tendaho Dam and Irrigation Project; the largest irrigation project in Ethiopia to date. The dam is located in the most seismic part of Ethiopia and was originally designed to be founded on potentially liquefiable alluvium ...

  10. PREDICTION OF TOTAL DISSOLVED GAS EXCHANGE AT HYDROPOWER DAMS

    Energy Technology Data Exchange (ETDEWEB)

    Hadjerioua, Boualem [ORNL; Pasha, MD Fayzul K [ORNL; Stewart, Kevin M [ORNL; Bender, Merlynn [Bureau of Reclamation; Schneider, Michael L. [U.S. Army Corps of Engineers

    2012-07-01

    Total dissolved gas (TDG) supersaturation in waters released at hydropower dams can cause gas bubble trauma in fisheries resulting in physical injuries and eyeball protrusion that can lead to mortality. Elevated TDG pressures in hydropower releases are generally caused by the entrainment of air in spillway releases and the subsequent exchange of atmospheric gasses into solution during passage through the stilling basin. The network of dams throughout the Columbia River Basin (CRB) are managed for irrigation, hydropower production, flood control, navigation, and fish passage that frequently result in both voluntary and involuntary spillway releases. These dam operations are constrained by state and federal water quality standards for TDG saturation which balance the benefits of spillway operations designed for Endangered Species Act (ESA)-listed fisheries versus the degradation to water quality as defined by TDG saturation. In the 1970s, the United States Environmental Protection Agency (USEPA), under the federal Clean Water Act (Section 303(d)), established a criterion not to exceed the TDG saturation level of 110% in order to protect freshwater and marine aquatic life. The states of Washington and Oregon have adopted special water quality standards for TDG saturation in the tailrace and forebays of hydropower facilities on the Columbia and Snake Rivers where spillway operations support fish passage objectives. The physical processes that affect TDG exchange at hydropower facilities have been studied throughout the CRB in site-specific studies and routine water quality monitoring programs. These data have been used to quantify the relationship between project operations, structural properties, and TDG exchange. These data have also been used to develop predictive models of TDG exchange to support real-time TDG management decisions. These empirically based predictive models have been developed for specific projects and account for both the fate of spillway and

  11. Field Experimental Analysis of Prototype Twin Dam Failure Phenomenon

    Science.gov (United States)

    Tseng, Fu-Min; Chen, Su-Chin; An, Hsiuan-Pei

    2015-04-01

    We constructed a full scale two-dam system in Landao Creek, Huisun forest, Taiwan. From its own alluvium to investigate the dam break morphology and physical properties between two dams with three intervals in 16.2m (case 1), 32.4m (case 2) and 64.8m (case 3). We adjusted the interval by fixed upstream dam and changed downstream dam site to observed and analyzed dam failure processes and hydraulic properties of the dam system. Grain size distribution investigation and 3D Lidar model of the stream bed were executed before and after dams break to discuss the river morphology evolution. In addition, to explore the type of breach varying with time, we used the method of 3D Remodeling from Motion Structure with Multi-View Stereo, which is a 3D spatial modeling process by photoing an object at same time in more than four different angles with over 70% overlap to each other, to construct the 3D model of dams system in this study. Furthermore, the dam break process were analyzed by cameras images and data recorded from water level gauges. The result showed that the shortest intervals in Case 1 result in a stronger torrent impact at upstream side of downstream dam, more significant reduction in dam intensity and wider breach which was 22% more than that in Case 2. On the contrary, the failure duration between two dams in Case 3 was 4.0 and 2.7 times longer than that in Case 1 and Case 2, respectively. Consequently, the decrement of dam interval led to a greater damage and rapid increment of water level which was prompted by outburst flow from the upstream dam failure at downstream dam, and shorter failure duration in two-dam system. In addition, the transport distance of sediment which yielded from upstream dam breach depend on whether downstream was obstructed or not. The 90% sediment of upstream dam breach were deposited on the upstream side of downstream dam with a comparison of entire loss in case of downstream dam.

  12. La industria textil uruguaya (1900-1960

    Directory of Open Access Journals (Sweden)

    Magdalena Bertino

    2009-06-01

    Full Text Available La industria textil uruguaya se inició a comienzos del siglo XX con la instalación de algunas fábricas de tejidos de lana y de una gran hilandería de lana peinada. Desde la crisis de 1929, sustentada en la protección cambiaría, se expandió en forma acelerada durante el periodo conocido como de industrialización por sustitución de importaciones. Alcanzó su apogeo entre fines de la segunda guerra mundial y comienzos de la década de los cincuenta, al instalar hilanderías de algodón y de fibras sintéticas y cuando las exportaciones industriales laneras adquirieron una importante dimensión. El progresivo agotamiento de la sustitución de importaciones, los frenos opuestos a las exportaciones, junto al estancamiento económico del país y el desmontaje de la protección estatal, la sumieron en una profunda crisis y en la pérdida creciente de significación en la industria y en la economía uruguaya.The Uruguayan textile industry started in the early xxth century based on the production of woven fabric and wool spinning mill (tops. From the years of the 1929's crisis onwards, it went through a great expansion due to a protectionist policy based on favourable exchange rates. Those were the times of the Import Substitutive Industrialization (ISI in the country. After the Second World War and, particularly, during the fifties it reached its height with the production of cotton fabrics and synthetic fibers. Meanwhile, wool exports would grow strongly. However, in the late fifties, the ISI strategy was in trouble and the obstacles for export's growth and the economic stagnation together with the removal of the protectionist's policies, put an end to the textile industry development. As a consequence, it experienced a deep crisis and lost importance both for the industry and for the economy as a whole.

  13. Investigation of geophysical methods for assessing seepage and internal erosion in embankment dams : a study of through-dam seismic testing at WAC Bennett Dam

    Energy Technology Data Exchange (ETDEWEB)

    Gaffran, P.; Jeffries, M. [BC Hydro, Burnaby, BC (Canada)

    2005-07-15

    Crosshole tomography is used to establish the distribution of seismic velocity between drill holes. The through-dam mode takes advantage of the triangular cross-section of earth embankments, obviating the need for drill holes. Seismic energy, generated on one face of the dam, passes underneath the crest and is detected by sensors arrayed on the opposite face. The sinkholes discovered at WAC Bennett Dam in 1996 provided an opportunity to test the procedure. Using p-wave energy, two series of measurements were conducted, notably one immediately before remediation of one sinkhole, and a second one shortly after the sinkhole was repaired. The known defect was successfully imaged by the first round of measurements. This report presented the results of an investigation of the through-dam seismic method using propagation of seismic waves through a dam from upstream to downstream, or vice-versa. The purpose of the study was to determine if this procedure could characterize the distribution of seismic velocity within a dam in an accurate and cost effective manner. The report presented the methods of velocity testing such as crosshole and downhole, and tomography; and through-dam measurements. Background to the Bennett Dam studies was also provided, with particular reference to the Bennett Dam sinkholes; sinkhole investigations; working hypothesis for sinkhole development; sinkhole number one characterization; and sinkhole remediation. An analysis of compression wave testing at Bennett Dam and shear wave testing was then offered. Other topics that were discussed included field test procedures; methodologies for data processing; p-waves versus s-waves; applicability of the research; and costs of through-dam surveys. It was concluded that under the right circumstances, through-dam seismic testing was capable of detecting changed conditions in an embankment dam. 15 refs., 2 tabs., 41 figs., 1 appendix.

  14. Dams life. Dams in operation; La vie des barrages. Barrages en exploitation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This paper summarizes the conclusions of the annual inspections of French dams in operation (fissures, water oozing, concrete swelling etc..). Only the observations which require a special attention are reported. (J.S.)

  15. Facilitating fish passage at ultra low head dams: An alternative to dam removal

    Science.gov (United States)

    Odeh, M.

    2004-01-01

    Ecosystem sustainability and returning the biological integrity to rivers continue to change the landscape of fish passage technology. Installing a conventional fishways has a limited degree of success in accommodating fish passage needs. Recently, the option of total dam removal has been gaining momentum among resource managers, conservationists, and even engineers. Certain dams, however, cannot be removed, and conventional fishways are either too expensive to build or the real estate is simply not available; yet freedom of passage must be attained. At the Little Falls Dam on the Potomac River a notch in the crest of the dam was installed to accommodate passage of fish. The notch has three labyrinth weirs used for energy dissipation. Water velocities are maintained at less than about 4 m/s anywhere within the passage structure during migratory season of the target species (American shad). Construction of this novel design was recently completed (March 2000) and future biological evaluations are ongoing. Copyright ASCE 2004.

  16. Application of strength reduction method to dynamic anti-sliding stability analysis of high gravity dam with complex dam foundation

    OpenAIRE

    Deng-hong Chen; Cheng-bin Du

    2011-01-01

    Considering that there are some limitations in analyzing the anti-sliding seismic stability of dam-foundation systems with the traditional pseudo-static method and response spectrum method, the dynamic strength reduction method was used to study the deep anti-sliding stability of a high gravity dam with a complex dam foundation in response to strong earthquake-induced ground action. Based on static anti-sliding stability analysis of the dam foundation undertaken by decreasing the shear streng...

  17. Mitigation and recovery of methane emissions from tropical hydroelectric dams

    Energy Technology Data Exchange (ETDEWEB)

    Bambace, L.A.W.; Ramos, F.M.; Lima, I.B.T.; Rosa, R.R. [Instituto Nacional de Pesquisas Espaciais (INPE), Sao Jose dos Campos (Brazil)

    2007-06-15

    Tropical hydroelectric reservoirs generally constitute an appreciable source of methane to the atmosphere. This paper proposes simple mitigation and recovery procedures to substantially reduce atmospheric methane emissions from hydroelectric reservoirs. We aim at transforming existing methane stocks of tropical reservoirs into a clean, renewable energy source. The recovered gas methane may be pumped to large consuming centers, stocked locally and burned in gas turbines to generate electricity during high demand periods, or even purified for transport applications. Our simulations show that the use of biogenic methane may increase considerably the energy supply in countries like Brazil. As a result, it would be possible to reduce the need of additional hydroelectric dams, protecting important pristine biomes, and avoiding the resettlement of villages and indigenous reserves. (author)

  18. Modelling approach for gravity dam break analysis

    Directory of Open Access Journals (Sweden)

    Boussekine Mourad

    2016-09-01

    Full Text Available The construction of dams in rivers can provide considerable benefits such as the supply of drinking and irrigation water; however the consequences which would result in the event of their failure could be catastrophic. They vary dramatically depending on the extent of the inundation area, the size of the population at risk.

  19. 75 FR 49429 - Metal and Nonmetal Dams

    Science.gov (United States)

    2010-08-13

    ... monitored at frequent intervals by a person trained to recognize unusual conditions; be inspected by a... identify unusual conditions and signs of instability. Personnel with more specialized knowledge of dam... be qualified for their level of responsibility and trained in inspection procedures. 11. What...

  20. Resilience scales of a dammed tropical river

    Science.gov (United States)

    Calamita, Elisa; Schmid, Martin; Wehrli, Bernhard

    2017-04-01

    Artificial river impoundments disrupt the seasonality and dynamics of thermal, chemical, morphological and ecological regimes in river systems. These alterations affect the aquatic ecosystems in space and time and specifically modify the seasonality and the longitudinal gradients of important biogeochemical processes. Resilience of river systems to anthropogenic stressors enables their recovery along the flow path; however little is known about the longitudinal distance that rivers need to partially restore their physical, chemical and biological integrity. In this study, the concept of a "resilience scale" will be explored for different water quality parameters downstream of Kariba dam, the largest artificial lake in the Zambezi basin (South-East Africa). The goal of this project is to develop a modelling framework to investigate and quantify the impact of large dams on downstream water quality in tropical context. In particular, we aim to assess the degree of reversibility of the main downstream alterations (temperature, oxygen, nutrients) and consequently the quantification of their longitudinal extent. Coupling in-situ measurements with hydraulic and hydrological parameters such as travel times, will allow us to define a physically-based parametrization of the different resilience scales for tropical rivers. The results will be used for improving future dam management at the local scale and assessing the ecological impact of planned dams at the catchment scale.