Guided wave testing for touch point corrosion

International Nuclear Information System (INIS)

Alleyne, David

2012-01-01

Guided wave testing (GWT) is established in the petrochemical and related industries, primarily for the detection of corrosion flaws. Touch point corrosion at support positions in pipe-work has become a significant problem within many operating gas, chemical and petro-chemical plants world-wide, particularly as a high proportion of these plants have been operational for many decades. This article demonstrates how GWT using guided waves sent axially along the pipe can be performed for the detection and accurate classification of touchpoint corrosion. The major advantage of GWT methods for the detection of touch point corrosion is its ability to examine several support positions from a single easy to access transducer position. The strategy is then to prioritize or rank the condition of the pipe at the supports by removing those with negligible wall loss from scheduling for further inspection. Guided waves are accurate at detecting and classifying corrosion patches at support positions, but deep pits within such patches are more difficult to accurately identify. Examples using data from routine inspection testing are used to support the development of the methods and testing approaches presented. Recent developments of the interpretation methods, testing procedures and calibration methods have significantly enhanced the capabilities of GWT for this important application.

Operational Based Vision Assessment Automated Vision Test Collection User Guide

Science.gov (United States)

2017-05-15

AFRL-SA-WP-SR-2017-0012 Operational Based Vision Assessment Automated Vision Test Collection User Guide Elizabeth Shoda, Alex...June 2015 – May 2017 4. TITLE AND SUBTITLE Operational Based Vision Assessment Automated Vision Test Collection User Guide 5a. CONTRACT NUMBER... automated vision tests , or AVT. Development of the AVT was required to support threshold-level vision testing capability needed to investigate the

Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases

CERN Document Server

American Society for Testing and Materials. Philadelphia

2000-01-01

1.1 This guide provides a common format for mechanical test data for composite materials for two purposes: (1) to establish data reporting requirements for test methods and ( 2) to provide information for the design of material property databases. This guide should be used in combination with Guide E 1309 which provides similar information to identify the composite material tested. 1.2 These guidelines are specific to mechanical tests of high-modulus fiber-reinforced composite materials. Types of tests considered in this guide include tension, compression, shear, flexure, open/filled hole, bearing, fracture toughness, and fatigue. The ASTM standards for which this guide was developed are listed in . The guidelines may also be useful for additional tests or materials. 1.3 This guide is the second part of a modular approach for which the first part is Guide E 1309. Guide E 1309 serves to identify the material, and this guide serves to describe mechanical testing procedures and variables and to record results....

Users Guide for the Strategic Thinking Mindset Test (STMT)

Science.gov (United States)

2017-06-01

practice of strategic thinking , both in an Army context and in the broader domain of organizational management. The diverse body of literature...Research Product 2018-02 User’s Guide for the Strategic Thinking Mindset Test (STMT) William S. Weyhrauch Consortium...COVERED (from. . . to) Sept 2012 – May 2016 4. TITLE AND SUBTITLE User’s Guide for the Strategic Thinking Mindset Test (STMT) 5a. CONTRACT OR

Design and tests of an adaptive focusing neutron guide

International Nuclear Information System (INIS)

Valicu, Roxana Georgiana

2012-01-01

This work contains the Monte Carlo Simulations, as well as the first tests with an adaptive focusing neutron guide for creating a focus that does not depend on the wavelength of the incoming neutrons. All known neutron guides consist of a rectangular shape, built out of four glass plates. The inner side of the guide is coated with a complex structure of metal layers. This reflects and guides the neutrons (in analogy with the reflection of the light). For beam focusing neutron guides with fixed curvature can be built. For most experiments it is important that the beam is focused on to a small surface of the sample. In the case of focusing guides with fixed curvature it has been observed that the focusing (dimension and position of the beam focus) is wavelength dependent. This is why for measurements that are performed with different wavelengths it is very important to change the curvature of the neutron guide in order to obtain optimal results. In this work we have designed, constructed and tested a guide where we can change the curvature during the experiment. In this way we can obtain a variable curvature in horizontal as well as in vertical direction. For a curvature in the horizontal or vertical direction it is not necessary to move all four walls, only two of the opposed plates. The element that changes the curvature of the guide consists of an acting element (piezomotor) as well as a rod that can be operated by the piezomotor and that acts through a lever onto the plate. The action of a force and a consecutive torsion momentum at the free end of the plate changes the curvature of the whole plate in an almost parabolic way. Making use of the Monte Carlo simulations we were able to determine the optimal curvature for each wavelength of a neutron guide for the spectrometer TOFTOF installed at the Forschungsneutronenquelle Heinz Maier-Leibnitz (FRM II). First tests have shown that with an adaptive focusing guide one can gain up to a factor three in intensity at

Design and tests of an adaptive focusing neutron guide

Energy Technology Data Exchange (ETDEWEB)

Valicu, Roxana Georgiana

2012-08-23

This work contains the Monte Carlo Simulations, as well as the first tests with an adaptive focusing neutron guide for creating a focus that does not depend on the wavelength of the incoming neutrons. All known neutron guides consist of a rectangular shape, built out of four glass plates. The inner side of the guide is coated with a complex structure of metal layers. This reflects and guides the neutrons (in analogy with the reflection of the light). For beam focusing neutron guides with fixed curvature can be built. For most experiments it is important that the beam is focused on to a small surface of the sample. In the case of focusing guides with fixed curvature it has been observed that the focusing (dimension and position of the beam focus) is wavelength dependent. This is why for measurements that are performed with different wavelengths it is very important to change the curvature of the neutron guide in order to obtain optimal results. In this work we have designed, constructed and tested a guide where we can change the curvature during the experiment. In this way we can obtain a variable curvature in horizontal as well as in vertical direction. For a curvature in the horizontal or vertical direction it is not necessary to move all four walls, only two of the opposed plates. The element that changes the curvature of the guide consists of an acting element (piezomotor) as well as a rod that can be operated by the piezomotor and that acts through a lever onto the plate. The action of a force and a consecutive torsion momentum at the free end of the plate changes the curvature of the whole plate in an almost parabolic way. Making use of the Monte Carlo simulations we were able to determine the optimal curvature for each wavelength of a neutron guide for the spectrometer TOFTOF installed at the Forschungsneutronenquelle Heinz Maier-Leibnitz (FRM II). First tests have shown that with an adaptive focusing guide one can gain up to a factor three in intensity at

Modal approach for the full simulation of nondestructive tests by elastic guided waves

International Nuclear Information System (INIS)

Jezzine, K.

2006-11-01

Tools for simulating nondestructive tests by elastic guided waves are developed. Two overall formulations based on modal formalism and reciprocity are derived depending on whether transmission and reception are separated or not. They relate phenomena of guided wave radiation by a transducer, their propagation, their scattering by a non-uniformity of the guide or a defect and their reception. Receiver electrical output is expressed as a product of terms relating to each phenomenon that can be computed separately. Their computation uses developments based on the semi-analytical finite elements method, dealing with guides of arbitrary cross-section and cracks normal to the guide axis. Simulation tools are used to study means for selecting a single mode using a transducer positioned on the guide section, such a selection making easier the interpretation of the results of testing by guided waves. Two methods of mode selection are proposed, based on the use of two specific frequencies (which existence depends on guide geometry and mode symmetry). Mimicking the normal stress distribution of the mode at one of these two frequencies or the other makes it possible to radiate solely or predominantly the mode chosen. Examinations are simulated in configurations using a single or two separated transducers positioned on the section of various guide geometries and cracks of various shapes. The interest and performances of the two methods of mode selection are studied in these configurations. (author)

Test and Evaluation Management Guide, Fifth Edition

National Research Council Canada - National Science Library

Claxton, John D; Cavoli, Christina; Johnson, Collie

2005-01-01

This January 2005 update to the Defense Acquisition University's "Test and Evaluation Management Guide" includes updates from the Military Services, Defense Agencies, and other organizations, as well...

Usability testing a practical guide for librarians

CERN Document Server

Blakiston, Rebecca

2014-01-01

Do you want to improve the usability of your library website, but feel that it is too difficult, time-consuming, or expensive? Usability Testing: A Practical Guide for Librarians will teach you how to make the case for usability testing, define your audience and their goals, select a usability testing method appropriate for your particular context, plan for an in-house usability test, conduct an effective in-house usability test, analyze usability test results, and create and implement a plan for ongoing, systematic usability testing. Step-by-step instructions, along with a myriad of examples,

Standard test method for guided bend test for ductility of welds

CERN Document Server

American Society for Testing and Materials. Philadelphia

2002-01-01

1.1 This test method covers a guided bend test for the determination of soundness and ductility of welds in ferrous and nonferrous products. Defects, not shown by X rays, may appear in the surface of a specimen when it is subjected to progressive localized overstressing. This guided bend test has been developed primarily for plates and is not intended to be substituted for other methods of bend testing. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Note 1—For additional information see Terminology E 6, and American Welding Society Standard D 1.1. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Automated particulate sampler field test model operations guide

Energy Technology Data Exchange (ETDEWEB)

Bowyer, S.M.; Miley, H.S.

1996-10-01

The Automated Particulate Sampler Field Test Model Operations Guide is a collection of documents which provides a complete picture of the Automated Particulate Sampler (APS) and the Field Test in which it was evaluated. The Pacific Northwest National Laboratory (PNNL) Automated Particulate Sampler was developed for the purpose of radionuclide particulate monitoring for use under the Comprehensive Test Ban Treaty (CTBT). Its design was directed by anticipated requirements of small size, low power consumption, low noise level, fully automatic operation, and most predominantly the sensitivity requirements of the Conference on Disarmament Working Paper 224 (CDWP224). This guide is intended to serve as both a reference document for the APS and to provide detailed instructions on how to operate the sampler. This document provides a complete description of the APS Field Test Model and all the activity related to its evaluation and progression.

Guide to testing insecticides on coniferous forest defoliators

Science.gov (United States)

Carroll B Jr. Williams; David A. Sharpnack; Liz Maxwell; Patrick J. Shea; Mark D. McGregor

1985-01-01

This report provides a guide to techniques for designing field tests of candidate insecticides, and for carrying out pilot tests and control projects. It describes experimental designs for testing hypotheses, and for sampling trees to estimate insect population densities and percent reduction after treatments. Directions for applying insecticides by aircraft and for...

CISSP Study Guide

CERN Document Server

Conrad, Eric; Feldman, Joshua

2010-01-01

The CISSP Study Guide is aligned to cover all of the material included in the exam, complete with special attention to recent updates. The 10 domains are covered completely and as concisely as possible with an eye to passing the exam thr first time. Each of the 10 domains has its own chapter that includes specially-designed pedagogy to aid you in passing the exam. Clearly Stated Exam Objectives Unique Terms / Definitions Exam Warnings Helpful Notes Learning By Example Stepped Chapter Ending Questions Self Test Appendix Detailed Glossary Web Site (htt

Standard guide for conducting exfoliation corrosion tests in aluminum alloys

CERN Document Server

American Society for Testing and Materials. Philadelphia

1992-01-01

1.1 This guide differs from the usual ASTM standard in that it does not address a specific test. Rather, it is an introductory guide for new users of other standard exfoliation test methods, (see Terminology G 15 for definition of exfoliation). 1.2 This guide covers aspects of specimen preparation, exposure, inspection, and evaluation for conducting exfoliation tests on aluminum alloys in both laboratory accelerated environments and in natural, outdoor atmospheres. The intent is to clarify any gaps in existent test methods. 1.3 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Managerial Accounting. Study Guide.

Science.gov (United States)

Plachta, Leonard E.

This self-instructional study guide is part of the materials for a college-level programmed course in managerial accounting. The study guide is intended for use by students in conjuction with a separate textbook, Horngren's "Accounting for Management Control: An Introduction," and a workbook, Curry's "Student Guide to Accounting for Management…

Software testing an ISTQB-BCS certified tester foundation guide

CERN Document Server

Hambling, Brian; Samaroo, Angelina; Thompson, Geoff; Williams, Peter; Hambling, Brian

2015-01-01

This practical guide provides insight into software testing, explaining the basics of the testing process and how to perform effective tests. It provides an overview of different techniques and how to apply them. It is the best-selling official textbook of the ISTQB-BCS Certified Tester Foundation Level.

Test and control computer user's guide for a digital beam former test system

Science.gov (United States)

Alexovich, Robert E.; Mallasch, Paul G.

1992-01-01

A Digital Beam Former Test System was developed to determine the effects of noise, interferers and distortions, and digital implementations of beam forming as applied to the Tracking and Data Relay Satellite 2 (TDRS 2) architectures. The investigation of digital beam forming with application to TDRS 2 architectures, as described in TDRS 2 advanced concept design studies, was conducted by the NASA/Lewis Research Center for NASA/Goddard Space Flight Center. A Test and Control Computer (TCC) was used as the main controlling element of the digital Beam Former Test System. The Test and Control Computer User's Guide for a Digital Beam Former Test System provides an organized description of the Digital Beam Former Test System commands. It is written for users who wish to conduct tests of the Digital Beam forming Test processor using the TCC. The document describes the function, use, and syntax of the TCC commands available to the user while summarizing and demonstrating the use of the commands wtihin DOS batch files.

Marketing and Society. Study Guide.

Science.gov (United States)

Welsh, Robert S.; Blake, Rowland S.

This self-instructional study guide is part of the materials for a college-level programmed course entitled "Marketing and Society." The study guide is intended for use by students in conjunction with a related textbook, a workbook, a review guide, and a series of instructional tape casettes. The study guide contains a brief introductory section…

Tape edge study in a linear tape drive with single-flanged guides

International Nuclear Information System (INIS)

Goldade, A.V.; Bhushan, Bharat

2004-01-01

Improved tape guiding and tape dimensional stability are essential for magnetic tape linear recoding formats to take advantage of vastly increased track density and thereby achieve higher storage capacities. Tape guiding is dependent on numerous parameters, such as type of the guides and tape path geometry, quality of virgin tape edge, drive operating parameters (e.g., tape speed and tape tension), mechanical properties of the tape, and tape geometry (e.g., cupping and curvature). The objective of the present study is to evaluate guiding and tribological performance of single-flanged guides with porous air bearings in a linear tape drive. A comparison of guiding performance of the dual flanged stationary guides and single-flanged guides with porous air bearings is performed. The effect of tape path geometry, drive operating conditions (speed and tension) and tape edge quality of factory-slit tapes on tape guiding are evaluated during short-term tests. A lateral force measurement technique is used to measure the force exerted by the tape edge on the guide flange. A technique for the lateral tape motion measurement is used to study the effect of continuous sliding on tape guiding. Wear tests up to 5000 cycles are conducted and coefficient of friction and lateral tape motion are monitored to study the effect of drive operating conditions (speed and tension), edge quality of factory-slit tapes and tape thickness on tape guiding. Optical microscopy, atomic force microscopy and scanning electron microscopy are employed to study and quantify the quality of tape edge

Ethical hacking and penetration testing guide

CERN Document Server

Baloch, Rafay

2014-01-01

Requiring no prior hacking experience, Ethical Hacking and Penetration Testing Guide supplies a complete introduction to the steps required to complete a penetration test, or ethical hack, from beginning to end. You will learn how to properly utilize and interpret the results of modern-day hacking tools, which are required to complete a penetration test. The book covers a wide range of tools, including Backtrack Linux, Google reconnaissance, MetaGooFil, dig, Nmap, Nessus, Metasploit, Fast Track Autopwn, Netcat, and Hacker Defender rootkit. Supplying a simple and clean explanation of how to effectively utilize these tools, it details a four-step methodology for conducting an effective penetration test or hack.Providing an accessible introduction to penetration testing and hacking, the book supplies you with a fundamental understanding of offensive security. After completing the book you will be prepared to take on in-depth and advanced topics in hacking and penetration testing. The book walks you through each ...

Flight Test Guide (Part 61 Revised): Instrument Pilot: Helicopter.

Science.gov (United States)

Federal Aviation Administration (DOT), Washington, DC. Flight Standards Service.

The guide provides an outline of the skills required to pass the flight test for an Instrument Pilot Helicopter Rating under Part 61 (revised) of Federal Aviation Regulations. General procedures for flight tests are described and the following pilot operations outlined: maneuvering by reference to instruments, IFR navigation, instrument…

Airline Transport Pilot-Airplane (Air Carrier) Written Test Guide.

Science.gov (United States)

Federal Aviation Administration (DOT), Washington, DC. Flight Standards Service.

Presented is information useful to applicants who are preparing for the Airline Transport Pilot-Airplane (Air Carrier) Written Test. The guide describes the basic aeronautical knowledge and associated requirements for certification, as well as information on source material, instructions for taking the official test, and questions that are…

Standard Guide for Benchmark Testing of Light Water Reactor Calculations

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This guide covers general approaches for benchmarking neutron transport calculations in light water reactor systems. A companion guide (Guide E2005) covers use of benchmark fields for testing neutron transport calculations and cross sections in well controlled environments. This guide covers experimental benchmarking of neutron fluence calculations (or calculations of other exposure parameters such as dpa) in more complex geometries relevant to reactor surveillance. Particular sections of the guide discuss: the use of well-characterized benchmark neutron fields to provide an indication of the accuracy of the calculational methods and nuclear data when applied to typical cases; and the use of plant specific measurements to indicate bias in individual plant calculations. Use of these two benchmark techniques will serve to limit plant-specific calculational uncertainty, and, when combined with analytical uncertainty estimates for the calculations, will provide uncertainty estimates for reactor fluences with ...

Study Guide for TCT in Health and Physical Education.

Science.gov (United States)

Mullan, Marie R.

This study guide is designed for those individuals preparing to take the Georgia Teacher Certification Test (TCT) in health and physical education. The test covers nine broad subareas: (1) health, body systems, disease; (2) tennis, handball, fencing, bowling, track, and recreational games; (3) development, hygiene, safety, nutrition; (4) softball,…

Nuclear medicine technology study guide

CERN Document Server

Patel, Dee

2011-01-01

Nuclear Medicine Technology Study Guide presents a comprehensive review of nuclear medicine principles and concepts necessary for technologists to pass board examinations. The practice questions and content follow the guidelines of the Nuclear Medicine Technology Certification Board (NMTCB) and American Registry of Radiological Technologists (ARRT), allowing test takers to maximize their success in passing the examinations. The book is organized by sections of increasing difficulty, with over 600 multiple-choice questions covering all areas of nuclear medicine, including radiation safety; radi

CCNA Wireless Study Guide

CERN Document Server

Lammle, Todd

2010-01-01

A complete guide to the CCNA Wireless exam by leading networking authority Todd Lammle. The CCNA Wireless certification is the most respected entry-level certification in this rapidly growing field. Todd Lammle is the undisputed authority on networking, and this book focuses exclusively on the skills covered in this Cisco certification exam. The CCNA Wireless Study Guide joins the popular Sybex study guide family and helps network administrators advance their careers with a highly desirable certification.: The CCNA Wireless certification is the most respected entry-level wireless certification

TRENDS: A flight test relational database user's guide and reference manual

Science.gov (United States)

Bondi, M. J.; Bjorkman, W. S.; Cross, J. L.

1994-01-01

This report is designed to be a user's guide and reference manual for users intending to access rotocraft test data via TRENDS, the relational database system which was developed as a tool for the aeronautical engineer with no programming background. This report has been written to assist novice and experienced TRENDS users. TRENDS is a complete system for retrieving, searching, and analyzing both numerical and narrative data, and for displaying time history and statistical data in graphical and numerical formats. This manual provides a 'guided tour' and a 'user's guide' for the new and intermediate-skilled users. Examples for the use of each menu item within TRENDS is provided in the Menu Reference section of the manual, including full coverage for TIMEHIST, one of the key tools. This manual is written around the XV-15 Tilt Rotor database, but does include an appendix on the UH-60 Blackhawk database. This user's guide and reference manual establishes a referrable source for the research community and augments NASA TM-101025, TRENDS: The Aeronautical Post-Test, Database Management System, Jan. 1990, written by the same authors.

A Study on Improvement of Test Method of Nuclear Power Plant ESF ACS by applying Regulatory Guide 1.52 (Rev.3)

International Nuclear Information System (INIS)

Lee, Sook Kyung; Kim, Kwang Sin; Sohn, Soon Hwan; Song, Kyu Min; Lee, Kae Woo; Cho, Byoung Ho; Park, Jeong Seo; Yoo, Byeang Jea; Hong, Soon Joon; Kang, Sun Haeng

2010-01-01

U. S. NRC Regulation Guide 1.52 regulating ESF ACS in nuclear power plants has been revised to revision 3. To apply reduction of operability test time, allowance of alternative challenge agents for in-place leak test of HEPA filters, and upgrade of Methyl Iodide penetration acceptance criterion in activated carbon performance test suggested in Reg. Guide 1.52(Rev.3) on Yonggwang units 5 and 6 ESF ACSes, technical feasibility study was carried out with on-site experiments as well as experiments with a lab-scale model. It was confirmed that the moisture in the system returned to the level before the test in 1 or 4 days even though the moisture was removed during the operability test lasting more than 10 hours. Therefore, it is appropriate to perform monthly operability test in 15 minutes just long enough to check the operability of equipment. To change challenge material for in-place HEPA filter leak test, size of aerosol, production rate, and leak detection capability were compared for DOP and PAO. It was concluded that PAO can be substituted for DOP in nuclear power plants. The upgrade of Methyl Iodide penetration acceptance criterion from 0.175 % to 0.5 % in active carbon filter bed deeper than 4 inches was to conform to the change of activated carbon performance test method to ASTM D3803(1989). It was confirmed that Methyl Iodide penetration acceptance criterion of 0.5 % under 30 .deg. C

Study guide for college algebra

CERN Document Server

Snow, James W; Shapiro, Arnold

1981-01-01

Study Guide for College Algebra is a supplemental material for the basic text, College Algebra. Its purpose is to make the learning of college algebra and trigonometry easier and enjoyable.The book provides detailed solutions to exercises found in the text. Students are encouraged to use the study guide as a learning tool during the duration of the course, a reviewer prior to an exam, a reference book, and as a quick overview before studying a section of the text. The Study Guide and Solutions Manual consists of four major components: basic concepts that should be learned from each unit, what

Field Test of the World Health Organization Multi-Professional Patient Safety Curriculum Guide

Science.gov (United States)

Farley, Donna; Zheng, Hao; Rousi, Eirini; Leotsakos, Agnès

2015-01-01

Introduction Although the importance of training in patient safety has been acknowledged for over a decade, it remains under-utilized and under-valued in most countries. WHO developed the Multi-professional Patient Safety Curriculum Guide to provide schools with the requirements and tools for incorporating patient safety in education. It was field tested with 12 participating schools across the six WHO regions, to assess its effectiveness for teaching patient safety to undergraduate and graduate students in a global variety of settings. Methods The evaluation used a combined prospective/retrospective design to generate formative information on the experiences of working with the Guide and summative information on the impacts of the Guide. Using stakeholder interviews and student surveys, data were gathered from each participating school at three times: the start of the field test (baseline), soon after each school started teaching, and soon after each school finished teaching. Results Stakeholders interviewed were strongly positive about the Guide, noting that it emphasized universally important patient safety topics, was culturally appropriate for their countries, and gave credibility and created a focus on patient safety at their schools. Student perceptions and attitudes regarding patient safety improved substantially during the field test, and their knowledge of the topics they were taught doubled, from 10.7% to 20.8% of correct answers on the student survey. Discussion This evaluation documented the effectiveness of the Curriculum Guide, for both ease of use by schools and its impacts on improving the patient safety knowledge of healthcare students. WHO should be well positioned to refine the contents of the Guide and move forward in encouraging broader use of the Guide globally for teaching patient safety. PMID:26406893

Field Test of the World Health Organization Multi-Professional Patient Safety Curriculum Guide.

Science.gov (United States)

Farley, Donna; Zheng, Hao; Rousi, Eirini; Leotsakos, Agnès

2015-01-01

Although the importance of training in patient safety has been acknowledged for over a decade, it remains under-utilized and under-valued in most countries. WHO developed the Multi-professional Patient Safety Curriculum Guide to provide schools with the requirements and tools for incorporating patient safety in education. It was field tested with 12 participating schools across the six WHO regions, to assess its effectiveness for teaching patient safety to undergraduate and graduate students in a global variety of settings. The evaluation used a combined prospective/retrospective design to generate formative information on the experiences of working with the Guide and summative information on the impacts of the Guide. Using stakeholder interviews and student surveys, data were gathered from each participating school at three times: the start of the field test (baseline), soon after each school started teaching, and soon after each school finished teaching. Stakeholders interviewed were strongly positive about the Guide, noting that it emphasized universally important patient safety topics, was culturally appropriate for their countries, and gave credibility and created a focus on patient safety at their schools. Student perceptions and attitudes regarding patient safety improved substantially during the field test, and their knowledge of the topics they were taught doubled, from 10.7% to 20.8% of correct answers on the student survey. This evaluation documented the effectiveness of the Curriculum Guide, for both ease of use by schools and its impacts on improving the patient safety knowledge of healthcare students. WHO should be well positioned to refine the contents of the Guide and move forward in encouraging broader use of the Guide globally for teaching patient safety.

Regulatory Guide 1.79 safety injection recirculation test requirements, fact or fiction

International Nuclear Information System (INIS)

Roberts, J.K.

1976-01-01

The overwhelming concern of the general public in this day of state nuclear initiatives is the basic question, ''is nuclear power safe.'' Much of this concern has focused on the emergency core cooling systems. This public attention spotlights the testing organization's responsibility during startup of proving the operation and reliability of the emergency core cooling systems. The standard established by the Nuclear Regulatory Commission for testing emergency core cooling systems is Regulatory Guide 1.79 ''Preoperational Testing of Emergency Core Cooling Systems for Pressurized Water Reactors''. The nuclear industry must satisfy the testing requirements of Regulatory Guide 1.79 to meet their responsibility to the public; and to prevent future embarrassment when questioned on the adequacy of emergency core cooling systems

Lawyers Admin Law Study Guide

National Research Council Canada - National Science Library

1998-01-01

.... While every effort is made to ensure the accuracy of the study guide, it is the responsibility of the student to supplement the text with independent research. The study guide is designed to be a starting point for research, not a substitute for it.

Lathe Operator. Coordinator's Guide. Individualized Study Guide. General Metal Trades.

Science.gov (United States)

East Texas State Univ., Commerce. Occupational Curriculum Lab.

This guide provides information to enable coordinators to direct learning activities for students using an individualized study guide on operating a lathe. The study material is designed for students enrolled in cooperative part-time training and employed, or desiring to be employed, as lathe operators. Contents include a sample progress chart,…

Standard guide for conducting and evaluating galvanic corrosion tests in electrolytes

CERN Document Server

American Society for Testing and Materials. Philadelphia

1981-01-01

1.1 This guide covers conducting and evaluating galvanic corrosion tests to characterize the behavior of two dissimilar metals in electrical contact in an electrolyte under low-flow conditions. It can be adapted to wrought or cast metals and alloys. 1.2 This guide covers the selection of materials, specimen preparation, test environment, method of exposure, and method for evaluating the results to characterize the behavior of galvanic couples in an electrolyte. Note 1—Additional information on galvanic corrosion testing and examples of the conduct and evaluation of galvanic corrosion tests in electrolytes are given in Refs (1) through (7). 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicabil...

MCSA Windows Server 2012 R2 administration study guide exam 70-411

CERN Document Server

Panek, William

2015-01-01

Complete exam coverage, hands-on practice, and interactive studytools for the MCSA: Administering Windows Server 2012 R2 exam70-411 MCSA: Windows Server 2012 R2 Administration Study Guide: Exam70-411 provides comprehensive preparation for exam 70-411:Administering Windows Server 2012 R2. With full coverage of allexam domains, this guide contains everything you need to know to befully prepared on test day. Real-world scenarios illustrate thepractical applications of the lessons, and hands-on exercises allowyou to test yourself against everyday tasks. You get access to aninteractive practice te

I and C functional test facility user guide

International Nuclear Information System (INIS)

Kwon, Ki Chun

1996-07-01

The objective of I and C functional test facility (FTF) is to validate newly developed digital control and protection algorithm, alarm reduction algorithm and the function of operator support system and so on. Test facility is divided into three major parts; software, hardware and graphic user interface. Software consists of mathematical modeling which simulates 3 loop pressurizer water reactor, 993 MWe Westinghouse plant and supervisory module which interpret user instructions and data interface program. FTF is implemented in HP747I workstation using FORTRAN77 and ''C'' language under UNIX operating system. This User Guide provides file structure, instructions and program modification method and provides initial data, malfunction list, process variables list and simulation diagram as an appendix to test developed prototype. 12 figs. (Author)

I and C functional test facility user guide

Energy Technology Data Exchange (ETDEWEB)

Kwon, Ki Chun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1996-07-01

The objective of I and C functional test facility (FTF) is to validate newly developed digital control and protection algorithm, alarm reduction algorithm and the function of operator support system and so on. Test facility is divided into three major parts; software, hardware and graphic user interface. Software consists of mathematical modeling which simulates 3 loop pressurizer water reactor, 993 MWe Westinghouse plant and supervisory module which interpret user instructions and data interface program. FTF is implemented in HP747I workstation using FORTRAN77 and ``C`` language under UNIX operating system. This User Guide provides file structure, instructions and program modification method and provides initial data, malfunction list, process variables list and simulation diagram as an appendix to test developed prototype. 12 figs. (Author).

Guided Expectations: A Case Study of a Sound Collage Audio Guide

DEFF Research Database (Denmark)

Laursen, Ditte

This paper is a user evaluation of a mobile phone audio guide developed for visitors to use at the National Gallery of Denmark. The audio guide is offered as a downloadable MP3 file to every incoming visitor who is carrying a mobile phone with an open Bluetooth connection. The guide itself...... according to personal interest, and a conflict between the expectation of a learning experience rather than an aesthetic experience. Results indicate that most visitors are able to make sense of the guide and to use it successfully, in different ways, to enrich their visit. Evaluation also shows...... that visitors are fond of using their own mobile phones - but they have several problems with their phones in downloading the MP3 file. Read more: Guided Expectations: A Case Study of a Sound Collage Audio Guide | conference.archimuse.com...

DB2 9 for Linux, Unix, and Windows database administration certification study guide

CERN Document Server

Sanders, Roger E

2007-01-01

In DB2 9 for Linux, UNIX, and Windows Database Administration Certification Study Guide, Roger E. Sanders-one of the world's leading DB2 authors and an active participant in the development of IBM's DB2 certification exams-covers everything a reader needs to know to pass the DB2 9 UDB DBA Certification Test (731).This comprehensive study guide steps you through all of the topics that are covered on the test, including server management, data placement, database access, analyzing DB2 activity, DB2 utilities, high availability, security, and much more. Each chapter contains an extensive set of p

Guided mode studies of smectic liquid crystals

International Nuclear Information System (INIS)

Hodder, B.

2000-03-01

Recently there has been considerable interest in the use of ferroelectric liquid crystals in low power, fast switching display devices. At present the voltage switching process in surface stabilised ferroelectric liquid crystal (SSFLC) devices is not fully understood and a convenient theory for such cells has yet to be found. It is the primary aim of this work to characterise the optic tensor configuration (director profile) in thin cells (∼ 3.5 μm) containing ferroelectric liquid crystal (FLC) material. These results form a benchmark by which continuum theories may be tested. Polarised microscopy is, perhaps, the most common optical probe of liquid crystal cells. It should be appreciated that this technique is fundamentally limited, as the results are deduced from an integrated optical response of any given cell, and cannot be used to spatially resolve details of the director profile through the cell. The guided mode techniques used in this study are the primary non-integral probe and enable detailed spatial resolution of the director profile within liquid crystal cells. Analysis of guided mode data from cells containing homeotropically aligned FLC reveals the temperature dependence of the optical biaxiality and cone angle for a 40% chiral mixture of the commercially available FLC SCE8*. From these optical biaxiality measurements the temperature dependence of the biaxial order parameter C is determined. Guided mode studies of cells containing homogeneously aligned SCE8* (the conventional alignment for SSFLC devices) reveal the 0V equilibrium director profile from which a cone and chevron model is constructed. Subsequent studies of voltage induced elastic deformations of the director profile are presented and compared with a single elastic constant continuum theory which is shown to be inadequate. Optical guided mode techniques are not directly sensitive to the smectic layer configuration but X-ray scattering is. Here, for the first time, results are presented

Shade guide optimization--a novel shade arrangement principle for both ceramic and composite shade guides when identifying composite test objects.

Science.gov (United States)

Østervemb, Niels; Jørgensen, Jette Nedergaard; Hørsted-Bindslev, Preben

2011-02-01

The most widely used shade guide for composite materials is made of ceramic and arranged according to a non-proven method. There is a need for a composite shade guide using a scientifically based arrangement principle. To compare the shade tab arrangement of the Vitapan Classical shade guide and an individually made composite shade guide using both the originally proposed arrangement principle and arranged according to ΔE2000 values with hue group division. An individual composite shade guide made from Filtek Supreme XT body colors was compared to the Vitapan Classical shade guide. Twenty-five students matched color samples made from Filtek Supreme XT body colors using the two shade guides arranged after the two proposed principles--four shade guides in total. Age, sequence, gender, time, and number of correct matches were recorded. The proposed visually optimal composite shade guide was both fastest and had the highest number of correct matches. Gender was significantly associated with time used for color sampling but not regarding the number of correct shade matches. A composite shade guide is superior compared to the ceramic Vitapan Classical guide when using composite test objects. A rearrangement of the shade guide according to hue, subdivided according to ΔE2000, significantly reduces the time needed to take a color sample and increases the number of correct shade matches. Total color difference in relation to the lightest tab with hue group division is recommended as a possible and universally applicable mode of tab arrangement in dental color standards. Moreover, a shade guide made of the composite materials itself is to be preferred as both a faster and more accurate method of determining color. © 2011, COPYRIGHT THE AUTHORS. JOURNAL COMPILATION © 2011, WILEY PERIODICALS, INC.

Study of turbine and guide vanes integration to enhance the performance of cross flow vertical axis wind turbine

Science.gov (United States)

Wibowo, Andreas; Tjahjana, Dominicus Danardono Dwi Prija; Santoso, Budi; Situmorang, Marcelinus Risky Clinton

2018-02-01

The main purpose of this study is to investigate the best configuration between guide vanes and cross flow vertical axis wind turbine with variation of several parameters including guide vanes tilt angle and the number of turbine and guide vane blades. The experimental test were conducted under various wind speed and directions for testing cross flow wind turbine, consisted of 8, 12 and 16 blades. Two types of guide vane were developed in this study, employing 20° and 60° tilt angle. Both of the two types of guide vane had three variations of blade numbers which had same blade numbers variations as the turbines. The result showed that the configurations between 60° guide vane with 16 blade numbers and turbine with 16 blade numbers had the best configurations. The result also showed that for certain configuration, guide vane was able to increase the power generated by the turbine significantly by 271.39% compared to the baseline configuration without using of guide vane.

Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This guide is intended to summarize the standard test methods available on individual and composite materials utilized in fabrication of aerospace plastic transparent enclosures. As such, it is intended to specifically include transparent thermoplastics, transparent elastomers, and reinforced plastics, whether thermoplastic or thermosetting. 1.2 This guide is intended as an aid in the search for test methods pertinent to Aerospace Plastic Transparent Enclosures. It should be understood that all methods listed may not apply to all enclosures. 1.3 The standards included refer to the properties or aspects listed in Table 1. The properties or aspects are listed in alphabetical order and the descriptions used are intended to facilitate the search. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limi...

Lawyers Admin Law. Study Guide (Revision)

National Research Council Canada - National Science Library

1997-01-01

.... While every effort is made to ensure the accuracy of the study guide, it is the responsibility of the student to supplement the text with independent research. The study guide is designed to be a starting point for research, not a substitute for it.

Study of guided wave transmission through complex junction in sodium cooled reactor

International Nuclear Information System (INIS)

Elie, Q.; Le Bourdais, F.; Jezzine, K.; Baronian, V.

2015-01-01

Ultrasonic guided wave techniques are seen as suitable candidates for the inspection of welded structures within sodium cooled fast reactors (SFR), as the long range propagation of guided waves without amplitude attenuation can overcome the accessibility problem due to the liquid sodium. In the context of the development of the Advanced Sodium Test Reactor for Industrial Demonstration (ASTRID), the French Atomic Commission (CEA) investigates non-destructive testing techniques based on guided wave propagation. In this work, guided wave NDT methods are applied to control the integrity of welds located in a junction-type structure welded to the main vessel. The method presented in this paper is based on the analysis of scattering matrices peculiar to each expected defect, and takes advantage of the multi-modal and dispersive characteristics of guided wave generation. In a simulation study, an algorithm developed using the CIVA software is presented. It permits selecting appropriate incident modes to optimize detection and identification of expected flawed configurations. In the second part of this paper, experimental results corresponding to a first validation step of the simulation results are presented. The goal of the experiments is to estimate the effectiveness of the incident mode selection in plates. The results show good agreement between experience and simulation. (authors)

Development of an SH Wave Magnetostrictive Transducer Module for Guided Wave Testing of Plate Structures

International Nuclear Information System (INIS)

Cho, Seung Hyun; Park, Jae Ha; Kwon Hyu Sang; Ahn, Bong Young; Lee, Seung Seok

2009-01-01

Recently much attention has been paid to a guided wave due to its effective applicability to long range and fast inspection of structures. In guided wave based NDE, the appropriate selection of wave modes is one of important factors since the test performance is highly dependent on which mode of guided waves is employed. As far as plate-like structures are concerned, so far, SH guided wave has not been frequently applied compared to Lamb waves, which is mostly caused by the lack of proper and convenient transducers to generate and measure the SH waves. In this investigation, a new small-sized SH guided wave transducer based on magnetostriction is proposed. The present transducer was designed to be modular and be used with shear couplant to avoid the inconvenience of the existing magnetostrictive patch transducers, which comprises the ferromagnetic patch tightly bonded to a structure. The wave transduction mechanism and the detailed configuration of the present transducer are presented. Experimental verification is also conducted on test specimens and the results confirm the good performance of the present transducer module

Development of an SH Wave Magnetostrictive Transducer Module for Guided Wave Testing of Plate Structures

Energy Technology Data Exchange (ETDEWEB)

Cho, Seung Hyun; Park, Jae Ha; Kwon Hyu Sang; Ahn, Bong Young; Lee, Seung Seok [Korea Research Institute of Standards and Science, Daejeon (Korea, Republic of)

2009-04-15

Recently much attention has been paid to a guided wave due to its effective applicability to long range and fast inspection of structures. In guided wave based NDE, the appropriate selection of wave modes is one of important factors since the test performance is highly dependent on which mode of guided waves is employed. As far as plate-like structures are concerned, so far, SH guided wave has not been frequently applied compared to Lamb waves, which is mostly caused by the lack of proper and convenient transducers to generate and measure the SH waves. In this investigation, a new small-sized SH guided wave transducer based on magnetostriction is proposed. The present transducer was designed to be modular and be used with shear couplant to avoid the inconvenience of the existing magnetostrictive patch transducers, which comprises the ferromagnetic patch tightly bonded to a structure. The wave transduction mechanism and the detailed configuration of the present transducer are presented. Experimental verification is also conducted on test specimens and the results confirm the good performance of the present transducer module

A Study on Guide Sign Validity in Driving Simulator

Directory of Open Access Journals (Sweden)

Wei Zhonghua

2011-12-01

Full Text Available The role of guide sign to inform road user about the information of network is important. How to design and locate guide sign to increase traffic operation efficiency is a key point for traffic engineers. Driving simulator is useful devised to study guide sign in the process and system control. For the purpose of studying guide signs using the tool of driving simulator, guide sign's validity in driving simulator was studied. Results of this experiment are the foundation of further study on guide sign. Simulator calibration procedure for guide sign was set up in this study. Legibility distance as measure of performance was used to evaluate the validity of guide sign in driving simulator. Thirty two participants were recruited. Results indicated legibility distance and speed were inversely related with the method of data mining. Legibility distance and text height of guide sign were positive related. When speed is 20km/h, 30km/h, 40km/h, magnifying power of text height is 4.3, 4.1, 3.8, while guide signs are absolute validity in driving simulator.

Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels, E 706 (IH)

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This guide discusses test procedures that can be used in conjunction with, but not as alternatives to, those required by Practices E185 and E2215 for the surveillance of nuclear reactor vessels. The supplemental mechanical property tests outlined permit the acquisition of additional information on radiation-induced changes in fracture toughness, notch ductility, and yield strength properties of the reactor vessel steels. 1.2 This guide provides recommendations for the preparation of test specimens for irradiation, and identifies special precautions and requirements for reactor surveillance operations and postirradiation test planning. Guidance on data reduction and computational procedures is also given. Reference is made to other ASTM test methods for the physical conduct of specimen tests and for raw data acquisition.

Testing of a novel pin array guide for accurate three-dimensional glenoid component positioning.

Science.gov (United States)

Lewis, Gregory S; Stevens, Nicole M; Armstrong, April D

2015-12-01

A substantial challenge in total shoulder replacement is accurate positioning and alignment of the glenoid component. This challenge arises from limited intraoperative exposure and complex arthritic-driven deformity. We describe a novel pin array guide and method for patient-specific guiding of the glenoid central drill hole. We also experimentally tested the hypothesis that this method would reduce errors in version and inclination compared with 2 traditional methods. Polymer models of glenoids were created from computed tomography scans from 9 arthritic patients. Each 3-dimensional (3D) printed scapula was shrouded to simulate the operative situation. Three different methods for central drill alignment were tested, all with the target orientation of 5° retroversion and 0° inclination: no assistance, assistance by preoperative 3D imaging, and assistance by the pin array guide. Version and inclination errors of the drill line were compared. Version errors using the pin array guide (3° ± 2°) were significantly lower than version errors associated with no assistance (9° ± 7°) and preoperative 3D imaging (8° ± 6°). Inclination errors were also significantly lower using the pin array guide compared with no assistance. The new pin array guide substantially reduced errors in orientation of the central drill line. The guide method is patient specific but does not require rapid prototyping and instead uses adjustments to an array of pins based on automated software calculations. This method may ultimately provide a cost-effective solution enabling surgeons to obtain accurate orientation of the glenoid. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Standard practice for guided wave testing of above ground steel pipework using piezoelectric effect transduction

CERN Document Server

American Society for Testing and Materials. Philadelphia

2011-01-01

1.1 This practice provides a procedure for the use of guided wave testing (GWT), also previously known as long range ultrasonic testing (LRUT) or guided wave ultrasonic testing (GWUT). 1.2 GWT utilizes ultrasonic guided waves, sent in the axial direction of the pipe, to non-destructively test pipes for defects or other features by detecting changes in the cross-section and/or stiffness of the pipe. 1.3 GWT is a screening tool. The method does not provide a direct measurement of wall thickness or the exact dimensions of defects/defected area; an estimate of the defect severity however can be provided. 1.4 This practice is intended for use with tubular carbon steel or low-alloy steel products having Nominal Pipe size (NPS) 2 to 48 corresponding to 60.3 to 1219.2 mm (2.375 to 48 in.) outer diameter, and wall thickness between 3.81 and 25.4 mm (0.15 and 1 in.). 1.5 This practice covers GWT using piezoelectric transduction technology. 1.6 This practice only applies to GWT of basic pipe configuration. This inc...

CompTIA A+ complete study guide exams 220-801 and 220-802

CERN Document Server

Docter, Quentin; Skandier, Toby

2012-01-01

CompTIA Authorized, fully updated Study Guide for the leading IT certification: CompTIA A+ CompTIA A+ is the de facto certification for IT technicians. Some vendors even require employees to achieve certification as part of their job training. This book prepares you for both required exams: 220-801 and 220-802. Totally updated to cover the 2012 exams, this popular prep guide covers all the exam objectives. Readers will also have access to additional study tools, including the Sybex Test Engine with bonus practice exams, electronic flashcards, and a glossary of important terms in searchable PD

Light Guide Collector Prototype: Laboratory Testing

OpenAIRE

Jitka - Mohelnikova; Stanislav Darula; Ayodeji Omishore; Petr Mohelnik; Denis Micek

2017-01-01

The article reviews the potential of light guide system equipped by a concentrator device capturing daylight applicable for illumination of building interiors and presents results of experiments on performance of its prototype. The main goal is focused on the comparison of traditional solutions and newly developed prototype of the light guide system and presents examination of its light transmission efficiency based on the laboratory experiments.

Standard Guide for Conducting Corrosion Tests in Field Applications

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This guide covers procedures for conducting corrosion tests in plant equipment or systems under operating conditions to evaluate the corrosion resistance of engineering materials. It does not cover electrochemical methods for determining corrosion rates. 1.1.1 While intended primarily for immersion tests, general guidelines provided can be applicable for exposure of test specimens in plant atmospheres, provided that placement and orientation of the test specimens is non-restrictive to air circulation. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See also 10.4.2.

Experimental study of curved guide tubes for pellet injection

International Nuclear Information System (INIS)

Combs, S.K.; Baylor, L.R.; Foust, C.R.; Gouge, M.J.; Jernigan, T.C.; Milora, S.L.

1997-01-01

The use of curved guide tubes for transporting frozen hydrogen pellets offers great flexibility for pellet injection into plasma devices. While this technique has been previously employed, an increased interest in its applicability has been generated with the recent ASDEX Upgrade experimental data for magnetic high-field side (HFS) pellet injection. In these innovative experiments, the pellet penetration appeared to be significantly deeper than for the standard magnetic low-field side injection scheme, along with corresponding greater fueling efficiencies. Thus, some of the major experimental fusion devices are planning experiments with HFS pellet injection. Because of the complex geometries of experimental fusion devices, installations with multiple curved guide tube sections will be required for HFS pellet injection. To more thoroughly understand and document the capability of curved guide tubes, an experimental study is under way at the Oak Ridge National Laboratory (ORNL). In particular, configurations and pellet parameters applicable for the DIII-D tokamak and the International Thermonuclear Experimental Reactor (ITER) were simulated in laboratory experiments. Initial test results with nominal 2.7- and 10-mm-diam deuterium pellets are presented and discussed

Light Guide Collector Prototype: Laboratory Testing

Directory of Open Access Journals (Sweden)

Jitka - Mohelnikova

2017-12-01

Full Text Available The article reviews the potential of light guide system equipped by a concentrator device capturing daylight applicable for illumination of building interiors and presents results of experiments on performance of its prototype. The main goal is focused on the comparison of traditional solutions and newly developed prototype of the light guide system and presents examination of its light transmission efficiency based on the laboratory experiments.

Evidence: Study Guide. Revision

National Research Council Canada - National Science Library

1997-01-01

...) correct application of principles of military rules of evidence. This study guide is also intended to be a convenient reference for use by Navy and Marine Corps judge advocates and Coast Guard law...

Robotic Needle Guide for Prostate Brachytherapy: Clinical Testing of Feasibility and Performance

Science.gov (United States)

Song, Danny Y; Burdette, Everette C; Fiene, Jonathan; Armour, Elwood; Kronreif, Gernot; Deguet, Anton; Zhang, Zhe; Iordachita, Iulian; Fichtinger, Gabor; Kazanzides, Peter

2010-01-01

Purpose Optimization of prostate brachytherapy is constrained by tissue deflection of needles and fixed spacing of template holes. We developed and clinically tested a robotic guide towards the goal of allowing greater freedom of needle placement. Methods and Materials The robot consists of a small tubular needle guide attached to a robotically controlled arm. The apparatus is mounted and calibrated to operate in the same coordinate frame as a standard template. Translation in x and y directions over the perineum ±40mm are possible. Needle insertion is performed manually. Results Five patients were treated in an IRB-approved study. Confirmatory measurements of robotic movements for initial 3 patients using infrared tracking showed mean error of 0.489 mm (SD 0.328 mm). Fine adjustments in needle positioning were possible when tissue deflection was encountered; adjustments were performed in 54/179 (30.2%) needles placed, with 36/179 (20.1%) adjustments of > 2mm. Twenty-seven insertions were intentionally altered to positions between the standard template grid to improve the dosimetric plan or avoid structures such as pubic bone and blood vessels. Conclusions Robotic needle positioning provided a means of compensating for needle deflections as well as the ability to intentionally place needles into areas between the standard template holes. To our knowledge, these results represent the first clinical testing of such a system. Future work will be incorporation of direct control of the robot by the physician, adding software algorithms to help avoid robot collisions with the ultrasound, and testing the angulation capability in the clinical setting. PMID:20729152

Biopsy guided by real-time sonography fused with MRI: a phantom study

DEFF Research Database (Denmark)

Ewertsen, C.; Grossjohann, Hanne Sønder; Nielsen, Kristina Rue

2008-01-01

OBJECTIVE: The purpose of our study was to test the accuracy of sonographically guided biopsies in a phantom of structures not visible on sonography but shown on MRI by using commercially available sonography systems with image fusion software. MATERIALS AND METHODS: A previously recorded MRI...

Study on guided waves in semiconductor lasers

International Nuclear Information System (INIS)

Pudensi, M.A.A.

1980-01-01

In This work we studied the guided waves in semiconductor lasers. In the first part we carried on the experimental measurements on lasers with stripe nonorthogonal to the mirrors. In the second part we developed a matrix method for the study of propagation and reflection of guided waves in lasers. (author) [pt

Study on the transmission efficiency of curved neutron guide

International Nuclear Information System (INIS)

Wang Hongli; Zhang Li; Guo Liping; Yang Tonghua; Zhao Zhixiang

2004-01-01

Monte-Carlo simulation program NGT2002 is used to study the transmission efficiency of curved neutron guide from character wavelength, film reflectivity, film material, geometry adjustment error, gap between guides and guide fabricate error, the authors get the transmission efficiency curves of the Ni, supper mirror curved neutron guides, also we have a discuss of how to choose the curved neutron guide's character wavelength. By the simulation results, the authors determine the proper film reflectivity value, guide horizontal geometry adjustment error range, optimized gap value between guide elements and guide width fabricate geometry error range. (authors)

Development of a fresh cadaver model for instruction of ultrasound-guided breast biopsy during the surgery clerkship: pre-test and post-test results among third-year medical students.

Science.gov (United States)

McCrary, Hilary C; Krate, Jonida; Savilo, Christine E; Tran, Melissa H; Ho, Hang T; Adamas-Rappaport, William J; Viscusi, Rebecca K

2016-11-01

The aim of our study was to determine if a fresh cadaver model is a viable method for teaching ultrasound (US)-guided breast biopsy of palpable breast lesions. Third-year medical students were assessed both preinstruction and postinstruction on their ability to perform US-guided needle aspiration or biopsy of artificially created masses using a 10-item checklist. Forty-one third-year medical students completed the cadaver laboratory as part of the surgery clerkship. Eight items on the checklist were found to be significantly different between pre-testing and post-testing. The mean preinstruction score was 2.4, whereas the mean postinstruction score was 7.10 (P cadaver models have been widely used in medical education. However, there are few fresh cadaver models that provide instruction on procedures done in the outpatient setting. Our model was found to be an effective method for the instruction of US-guided breast biopsy among medical students. Copyright © 2016 Elsevier Inc. All rights reserved.

Criticality safety basics, a study guide

Energy Technology Data Exchange (ETDEWEB)

V. L. Putman

1999-09-01

This document is a self-study and classroom guide, for criticality safety of activities with fissile materials outside nuclear reactors. This guide provides a basic overview of criticality safety and criticality accident prevention methods divided into three parts: theory, application, and history. Except for topic emphasis, theory and history information is general, while application information is specific to the Idaho National Engineering and Environmental Laboratory (INEEL). Information presented here should be useful to personnel who must know criticality safety basics to perform their assignments safely or to design critically safe equipment or operations. However, the guide's primary target audience is fissile material handler candidates.

Criticality safety basics, a study guide

International Nuclear Information System (INIS)

Putman, V.L.

1999-01-01

This document is a self-study and classroom guide, for criticality safety of activities with fissile materials outside nuclear reactors. This guide provides a basic overview of criticality safety and criticality accident prevention methods divided into three parts: theory, application, and history. Except for topic emphasis, theory and history information is general, while application information is specific to the Idaho National Engineering and Environmental Laboratory (INEEL). Information presented here should be useful to personnel who must know criticality safety basics to perform their assignments safely or to design critically safe equipment or operations. However, the guide's primary target audience is fissile material handler candidates

ITIL Foundation exam study guide

CERN Document Server

Gallacher, Liz

2012-01-01

Everything you need to prepare for the ITIL exam The ITIL (Information Technology Infrastructure Library) exam is the ultimate certification for IT service management. This essential resource is a complete guide to preparing for the ITIL Foundation exam and includes everything you need for success. Organized around the ITIL Foundation syllabus, the study guide addresses the ITIL Service Lifecycles, the ITIL processes, roles, and functions, and also thoroughly explains how the Service Lifecycle provides effective and efficient IT services. Offers an introduction to IT service management and ITI

A Guide to Curriculum Planning in Global Studies.

Science.gov (United States)

Hartoonian, H. Michael; Stock, Hilary

This guide is designed to assist educators develop curricula to embrace global perspectives. The guide is organized into five sections. The first section provides an overview of global studies, and seeks to answer such questions as "Why study global studies?" and "What does global studies include?" The second section identifys…

Study guide for applied finite mathematics

CERN Document Server

Macri, Nicholas A

1982-01-01

Study Guide for Applied Finite Mathematics, Third Edition is a study guide that introduces beginners to the fundamentals of finite mathematics and its various realistic and relevant applications. Some applications of probability, game theory, and Markov chains are given. Each chapter includes exercises, and each set begins with basic computational ""drill"" problems and then progresses to problems with more substance.Comprised of 10 chapters, this book begins with exercises related to set theory and concepts such as the union and intersection of sets. Exercises on Cartesian coordinate

CT-guided transthoracic core needle biopsy for small pulmonary lesions: diagnostic performance and adequacy for molecular testing.

Science.gov (United States)

Tian, Panwen; Wang, Ye; Li, Lei; Zhou, Yongzhao; Luo, Wenxin; Li, Weimin

2017-02-01

Computed tomography (CT)-guided transthoracic needle biopsy is a well-established, minimally invasive diagnostic tool for pulmonary lesions. Few large studies have been conducted on the diagnostic performance and adequacy for molecular testing of transthoracic core needle biopsy (TCNB) for small pulmonary lesions. This study included CT-guided TCNB with 18-gauge cutting needles in 560 consecutive patients with small (≤3 cm) pulmonary lesions from January 2012 to January 2015. There were 323 males and 237 females, aged 51.8±12.7 years. The size of the pulmonary lesions was 1.8±0.6 cm. The sensitivity, specificity, accuracy and complications of the biopsies were investigated. The risk factors of diagnostic failure were assessed using univariate and multivariate analyses. The sample's adequacy for molecular testing of non-small cell lung cancer (NSCLC) was analyzed. The overall sensitivity, specificity, and accuracy for diagnosis of malignancy were 92.0% (311/338), 98.6% (219/222), and 94.6% (530/560), respectively. The incidence of bleeding complications was 22.9% (128/560), and the incidence of pneumothorax was 10.4% (58/560). Logistic multivariate regression analysis showed that the independent risk factors for diagnostic failure were a lesion size ≤1 cm [odds ratio (OR), 3.95; P=0.007], lower lobe lesions (OR, 2.83; P=0.001), and pneumothorax (OR, 1.98; P=0.004). Genetic analysis was successfully performed on 95.45% (168/176) of specimens diagnosed as NSCLC. At least 96.8% of samples with two or more passes from a lesion were sufficient for molecular testing. The diagnostic yield of small pulmonary lesions by CT-guided TCNB is high, and the procedure is relatively safe. A lesion size ≤1 cm, lower lobe lesions, and pneumothorax are independent risk factors for biopsy diagnostic failure. TCNB specimens could provide adequate tissues for molecular testing.

Improvement of the vibration of the test fuel(Type-B) with a guide tube under operational condition

Energy Technology Data Exchange (ETDEWEB)

Sohn, Dong Seung; Yim, Jeong Sik; Lim, I. C. [Korea Atomic Energy Research Institute, Taejon (Korea)

1999-04-01

The Type-B test fuel for the Hanaro has a flexible guide tube on top of the fuel to lead and guide the instrumentation wires. Depending on the flow condition in the reactor, the fuel is susceptible to vibration. During the test operation of the fuel, a fairly large amplitude vibration was observed and the possibility of flow tube contact with adjacent flow tubes, due to the excessive vibration of the fuel, and consequent wear or defect of the flow tubes were raised. Thus, to know the vibration characteristics as well as whether the flow tube contact each other, analyses of the Type-B fuel the dummy fuel were performed by BEVIRA and ANSYS. Besides the analyses, vibration tests using the dummy fuel in air and with Type-B fuel in the core at zero power under operational flow condition were executed. The results from the analyses were compared with those from tests to validate the analyses. From the deflection test of the dummy fuel in air to get the maximum displacement of the flow tube at the top, the flow tube were found to contact each other. For the prevention of the contact of the flow tubes caused by the excessive vibration of the guide tube, an additional support to the guide tube was proposed. With the additional support, analysis and in core vibration test under operational flow condition were conducted and there found to be no excessive vibration any more. 6 refs., 16 figs., 6 tabs. (Author)

Designing Websites for ESL Learners: A Usability Testing Study

Science.gov (United States)

Liu, Min; Traphagan, Tomoko; Huh, Jin; Koh, Young Ihn; Choi, Gilok; McGregor, Allison

2008-01-01

The purpose of this paper is to report on a usability study for ESL websites conducted to gain insights from learners of English as a second language (ESL) as they interacted with specific sites. Five carefully selected ESL sites were tested by 10 different users generating a total of fifty testing sessions. Two major research questions guided the…

Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures

CERN Document Server

American Society for Testing and Materials. Philadelphia

2002-01-01

1.1 This guide summarizes the standard test methods available for determining physical and mechanical characteristics of interlayer materials used in multi-ply aerospace transparent enclosures. 1.2 Interlayer materials are used to laminate glass-to-glass, glass-to-plastic, and plastic-to-plastic. Interlayer materials are basically transparent adhesives with high-quality optical properties. They can also serve as an energy absorbing medium, a fail-safe membrane to contain cockpit pressure and to prevent entry of impact debris; a strain insulator to accommodate different thermal expansion rates of members being laminated and as an adherent to prevent spalling of inner surface ply material fragments. The relative importance of an interlayer characteristic will be a function of the prime use it serves in its particular application. 1.3 This guide, as a summary of various methods in Section 2, is intended to facilitate the selection of tests that can be applied to interlayer materials. 1.4 The test methods list...

WWC Study Review Guide: Group Design Studies

Science.gov (United States)

What Works Clearinghouse, 2018

2018-01-01

Underlying all What Works Clearinghouse (WWC) products are WWC Study Review Guides, which are intended for use by WWC certified reviewers to assess studies against the WWC evidence standards. As part of an ongoing effort to increase transparency, promote collaboration, and encourage widespread use of the WWC standards, the Institute of Education…

CCNA Cisco Certified Network Associate Deluxe Study Guide

CERN Document Server

Lammle, Todd

2011-01-01

Deluxe Edition of Best-Selling CCNA Study GuideThis comprehensive, enhanced version of the Sybex CCNA Study Guide provides certification candidates with the additional tools they need to prepare for this popular exam. With additional bonus exams and flashcards, as well as the exclusive CCNA Virtual Lab, Platinum Edition, this comprehensive guide has been completely updated to reflect the latest CCNA 640-802 exam. Written by Cisco Authority Todd Lammle, whose straightforward style provides lively examples, hands-on and written labs, easy-to-understand analogies, and real-world scenarios that wi

Effectiveness of Guided Multiple Choice Objective Questions Test on Students' Academic Achievement in Senior School Mathematics by School Location

Science.gov (United States)

Igbojinwaekwu, Patrick Chukwuemeka

2015-01-01

This study investigated, using pretest-posttest quasi-experimental research design, the effectiveness of guided multiple choice objective questions test on students' academic achievement in Senior School Mathematics, by school location, in Delta State Capital Territory, Nigeria. The sample comprised 640 Students from four coeducation secondary…

MCSA Microsoft Windows 8.1 complete study guide exams 70-687, 70-688, and 70-689

CERN Document Server

Shapiro, Jeffrey R

2015-01-01

Comprehensive, hands-on study guide for the Microsoft Windows 8.1 exams The MCSA: Microsoft Windows 8.1 Complete Study Guide is a comprehensive package loaded with educational study tools, including a pre-assessment test, hands-on exercises, hundreds of review questions, exclusive practice exam questions, electronic flashcards, and over an hour of author-led videos. For IT students and professionals, getting certified on Microsoft Windows 8.1 can mean huge career opportunities. Over 90% of all personal computing devices run on Windows, and those certified on the newest version will be in high

Acid Rain Study Guide.

Science.gov (United States)

Hunger, Carolyn; And Others

Acid rain is a complex, worldwide environmental problem. This study guide is intended to aid teachers of grades 4-12 to help their students understand what acid rain is, why it is a problem, and what possible solutions exist. The document contains specific sections on: (1) the various terms used in conjunction with acid rain (such as acid…

Electromagnetic ultrasonic guided waves

CERN Document Server

Huang, Songling; Li, Weibin; Wang, Qing

2016-01-01

This book introduces the fundamental theory of electromagnetic ultrasonic guided waves, together with its applications. It includes the dispersion characteristics and matching theory of guided waves; the mechanism of production and theoretical model of electromagnetic ultrasonic guided waves; the effect mechanism between guided waves and defects; the simulation method for the entire process of electromagnetic ultrasonic guided wave propagation; electromagnetic ultrasonic thickness measurement; pipeline axial guided wave defect detection; and electromagnetic ultrasonic guided wave detection of gas pipeline cracks. This theory and findings on applications draw on the author’s intensive research over the past eight years. The book can be used for nondestructive testing technology and as an engineering reference work. The specific implementation of the electromagnetic ultrasonic guided wave system presented here will also be of value for other nondestructive test developers.

Criminal Law Study Guide (Revision)

National Research Council Canada - National Science Library

1998-01-01

.... Correct application of principles of military criminal law. This study guide is the is the primary text for students in the course and may be also useful to practicing judge advocates as a starting point for research...

EnCE EnCase computer forensics : the official EnCase certified examiner : study guide

CERN Document Server

Bunting, Steve

2012-01-01

The official, Guidance Software-approved book on the newest EnCE exam! The EnCE exam tests that computer forensic analysts and examiners have thoroughly mastered computer investigation methodologies, as well as the use of Guidance Software's EnCase Forensic 7. The only official Guidance-endorsed study guide on the topic, this book prepares you for the exam with extensive coverage of all exam topics, real-world scenarios, hands-on exercises, up-to-date legal information, and sample evidence files, flashcards, and more. Guides readers through preparation for the newest EnCase Certified Examiner

Assessment of Pipe Wall Loss Using Guided Wave Testing

International Nuclear Information System (INIS)

Joo, Kyung Mun; Jin, Seuk Hong; Moon, Yong Sig

2010-01-01

Flow accelerated corrosion(FAC) of carbon steel pipes in nuclear power plants has been known as one of the major degradation mechanisms. It could have bad influence on the plant reliability and safety. Also detection of FAC is a significant cost to the nuclear power plant because of the need to remove and replace insulation. Recently, the interest of the guided wave testing(GWT) has grown because it allows long range inspection without removing insulation of the pipe except at the probe position. If GWT can be applied to detection of FAC damages, it will can significantly reduce the cost for the inspection of the pipes. The objective of this study was to determine the capability of GWT to identify location of FAC damages. In this paper, three kinds of techniques were used to measure the amplitude ratio between the first and the second welds at the elbow area of mock-ups that contain real FAC damages. As a result, optimal inspection technique and minimum detectability to detect FAC damages drew a conclusion

Analysis of a provider of proficiency testing by interlaboratory comparisons for dosimetry in function of guides ISO/IEC 43 and ILAC G13

International Nuclear Information System (INIS)

Lohr, J.; Zaretzky, Alba; Stefanic, Amalia M.; Saravi, M.

2009-01-01

The Ionising Radiation Dosimetry Group (CNEA) has participated of the last intercomparison scheme organized by EUROMET. This intercomparison was held starting 2005 until 2008.The objective of this paper is to analyze this Association as a proficiency test provider according to the ISO/IEC Guide 43 (1997) 'Proficiency testing by interlaboratory comparisons' and ILAC G13 Guide (2007) 'Guidelines for the Requirements for the Competence of Providers of Proficiency Testing Schemes'. The analysis of EURAMET (so called since 2007) as the provider of this dosimetric comparison was made taking into account the following sections of the ILAC G13 Guide: Conduct of proficiency testing schemes; Statistical design, Communication with participants and Reports, taking them as essential parameters of the compliance of a proficiency test provider with the general requirements set by the Guides. This intercomparison had special characteristics coming from the participants and the primary objective of the scheme. It is remarkable the important degree of agreement of the organization with Guides ISO/IEC 43 and ILAC G13. (author)

Numerical and experimental study of the leakage flow in guide vanes with different hydrofoils

Directory of Open Access Journals (Sweden)

Sailesh Chitrakar

2017-07-01

Full Text Available Clearance gaps between guide vanes and cover plates of Francis turbines tend to increase in size due to simultaneous effect of secondary flow and erosion in sediment affected hydropower plants. The pressure difference between the two sides of the guide vane induces leakage flow through the gap. This flow enters into the suction side with high acceleration, disturbing the primary flow and causing more erosion and losses in downstream turbine components. A cascade rig containing a single guide vane passage has been built to study the effect of the clearance gap using pressure sensors and PIV (Particle Image Velocimetry technique. This study focuses on developing a numerical model of the test rig, validating the results with experiments and investigating the behavior of leakage flow numerically. It was observed from both CFD and experiment that the leakage flow forms a passage vortex, which shifts away from the wall while travelling downstream. The streamlines contributing to the formation of this vortex have been discussed. Furthermore, the reference guide vane with symmetrical hydrofoil has been compared with four cambered profiles, in terms of the guide vane loading and the consequent effect on the leakage flow. A dimensionless term called Leakage Flow Factor (Lff has been introduced to compare the performances of hydrofoils. It is shown that the leakage flow and its effect on increasing losses and erosion can be minimized by changing the pressure distribution over the guide vane.

Modal approach for the full simulation of nondestructive tests by elastic guided waves; Approche modale pour la simulation globale de controles non-destructifs par ondes elastiques guidees

Energy Technology Data Exchange (ETDEWEB)

Jezzine, K

2006-11-15

Tools for simulating nondestructive tests by elastic guided waves are developed. Two overall formulations based on modal formalism and reciprocity are derived depending on whether transmission and reception are separated or not. They relate phenomena of guided wave radiation by a transducer, their propagation, their scattering by a non-uniformity of the guide or a defect and their reception. Receiver electrical output is expressed as a product of terms relating to each phenomenon that can be computed separately. Their computation uses developments based on the semi-analytical finite elements method, dealing with guides of arbitrary cross-section and cracks normal to the guide axis. Simulation tools are used to study means for selecting a single mode using a transducer positioned on the guide section, such a selection making easier the interpretation of the results of testing by guided waves. Two methods of mode selection are proposed, based on the use of two specific frequencies (which existence depends on guide geometry and mode symmetry). Mimicking the normal stress distribution of the mode at one of these two frequencies or the other makes it possible to radiate solely or predominantly the mode chosen. Examinations are simulated in configurations using a single or two separated transducers positioned on the section of various guide geometries and cracks of various shapes. The interest and performances of the two methods of mode selection are studied in these configurations. (author)

Standard guide for pyrophoricity/combustibility testing in support of pyrophoricity analyses of metallic uranium spent nuclear fuel

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This guide covers testing protocols for testing the pyrophoricity/combustibility characteristics of metallic uranium-based spent nuclear fuel (SNF). The testing will provide basic data for input into more detailed computer codes or analyses of thermal, chemical, and mechanical SNF responses. These analyses would support the engineered barrier system (EBS) design bases and safety assessment of extended interim storage facilities and final disposal in a geologic repository. The testing also could provide data related to licensing requirements for the design and operation of a monitored retrievable storage facility (MRS) or independent spent fuel storage installation (ISFSI). 1.2 This guide describes testing of metallic uranium and metallic uranium-based SNF in support of transportation (in accordance with the requirements of 10CFR71), interim storage (in accordance with the requirements of 10CFR72), and geologic repository disposal (in accordance with the requirements of 10CFR60/63). The testing described ...

CEH Certified Ethical Hacker Study Guide

CERN Document Server

Graves, Kimberly

2010-01-01

Prepare for the new version of CEH certification with this advanced guide. Once you learn the thought processes of unethical hackers, you can figure out how to secure your computer systems to defend against them. That's the philosophy behind ethical hacking, and it's a growing field. Prepare for certification in this important area with this advanced study guide that covers all exam objectives for the challenging CEH Certified Ethical Hackers exam. The book provides full coverage of exam topics, real-world examples, and a CD with additional materials for extra review and practice.:; Covers eth

The comparative study of CT guided and ultrasound guided percutaneous ethanol injection in the treatment of intra-abdominal cyst

International Nuclear Information System (INIS)

Li Heping; Yang Jianyong; Chen Wei; Zhuang Wenquan; Huang Yulian; Chen Jianye

2005-01-01

Objective: An comparative study of the interventional approach of CT guided and ultiasound guided percutaneous ethanol injection(PEI) in the treatment of intra-abdominal cyst. Methods: CT guided PEI was performed in the treatment of intra-abdominal cyst in 38 patients while ultrasound guided PEI was performed in 45 cases. Results: The puncture procedure of CT guided PEI was totally performed 83 times in treating 56 intra-abdominal cysts in 38 patients and CT guided PEI was unsuccessful in 6 patients. The puncture procedure of ultrasound guided PEI were performed 87 times in treating 71 intra-abdominal cysts in 55 patients and ultrasound guided PEI only failed only in 1 patient. Conclusion: Ultrasound guided PEI is superior to CT guided PEI in the treatment of intra-abdominal cyst. (authors)

Comptia Network+ review guide exam N10-006

CERN Document Server

Ferguson, Bill

2015-01-01

Be prepared for the Network+ exam CompTIA Network+ Review Guide is your ideal study companion for preparing for the CompTIA Network+ exam (N10-006). This concise review is the perfect companion to the CompTIA Network+ Study Guide and the CompTIA Network+ Deluxe Study Guide, with full exam coverage organized by objective for quick review and reinforcement of key topics. Each of the book's five parts is devoted to a specific domain area of the exam, providing a focused review to bolster areas of weak understanding. You get access to the Sybex test engine, which includes two bonus practice tests

Pain and anxiety control: an online study guide.

Science.gov (United States)

2008-05-01

The Editorial Board of the Journal of Endodontics has developed a literature-based study guide of topical areas related to endodontics. This study guide is intended to give the reader a focused review of the essential endodontic literature and does not cite all possible articles related to each topic. Although citing all articles would be comprehensive, it would defeat the idea of a study guide. This section will cover pain theories and dentin hypersensitivity, referred pain, oral pain not of dental origin, barodontalgia, local anesthetics, long-acting local anesthetics, intrapulpal anesthesia, intraligamentary anesthesia, intraosseous anesthesia, inferior alveolar nerve block anesthesia, Gow-Gates anesthesia technique, Vazirani-Akinosi anesthesia technique, second-division block anesthesia technique, endodontic postoperative pain, effect of occlusal adjustment on endodontic pain, paresthesia associated with periradicular pathosis, analgesics, sedation, and endodontic flare-ups.

Advanced Texas Studies: Curriculum Guide.

Science.gov (United States)

Harlandale Independent School District, San Antonio, TX. Career Education Center.

The guide is arranged in vertical columns relating curriculum concepts in Texas studies to curriculum performance objectives, career concepts and career performance objectives, suggested teaching methods, and audio-visual and resource materials. Career information is included on 24 related occupations. Space is provided for teachers' notes which…

Study guide for 1Z0-071 Oracle Database 12c SQL : Oracle Certification Prep

CERN Document Server

Morris, Matthew

2016-01-01

This Study Guide is targeted at IT professionals who are working towards becoming an Oracle Database 12c SQL Certified Associate. The book provides information covering all of the exam topics for the Oracle certification exam: "1Z0-071: Oracle Database 12c SQL". The books in the Oracle Certification Prep series are built in lockstep with the test topics provided by Oracle Education's certification program. Each book is intended to provide the information that will be tested in a clean and concise format. The guides introduce the subject you'll be tested on, follow that with the information you'll need to know for it, and then move on to the next topic. They contain no drills or unrealistic self-tests to bump the page count without adding value. The series is intended to provide a concentrated source of exam information that is compact enough to be read through multiple times. This series is ideal for experienced Oracle professionals that are familiar with the topic being tested, but want a means to rapidly re...

Ultrasound-Guided Intermediate Site Greater Occipital Nerve Infiltration: A Technical Feasibility Study.

Science.gov (United States)

Zipfel, Jonathan; Kastler, Adrian; Tatu, Laurent; Behr, Julien; Kechidi, Rachid; Kastler, Bruno

2016-01-01

Two studies recently reported that computed tomography (CT) guided infiltration of the greater occipital nerve at its intermediate site allows a high efficacy rate with long-lasting pain relief following procedure in occipital neuralgia and in various craniofacial pain syndromes. The purpose of our study was to evaluate the technical feasibility and safety of ultrasound-guided intermediate site greater occipital nerve infiltration. Retrospective study. This study was conducted at the imaging department of a 1,409 bed university hospital. Local institutional review board approval was obtained and written consent was waived. In this retrospective study, 12 patients suffering from refractory occipital neuralgia or craniofacial pain syndromes were included between April and October 2014. They underwent a total of 21 ultrasound-guided infiltrations. Infiltration of the greater occipital nerve was performed at the intermediate site of the greater occipital nerve, at its first bend between obliqus capitis inferior and semispinalis capitis muscles with local anestetics and cortivazol. Technical success was defined as satisfactory diffusion of added iodinated contrast media in the fatty space between these muscles depicted on control CT scan. We also reported first data of immediate block test efficacy and initial clinical efficacy at 7 days, one month, and 3 months, defined by a decrease of at least 50% of visual analog scale (VAS) scores. Technical success rate was 95.24%. Patients suffered from right unilateral occipital neuralgia in 3 cases, left unilateral occipital neuralgia in 2 cases, bilateral occipital neuralgia in 2 cases, migraine in one case, cervicogenic headache in one case, tension-type headache in 2 cases, and cluster headache in one case. Block test efficacy was found in 93.3% (14/15) cases. Clinical efficacy was found in 80% of cases at 7 days, in 66.7% of cases at one month and in 60% of cases at 3 months. No major complications were noted. Some of the

The Politics of Revolution; A Film Course Study Guide.

Science.gov (United States)

Kernan, Margot

This study guide for high school and college students examines selected, revolutionary political films made by Godard, Rocha, Solanas, Sanjines, and others, notably Czech and Cuban film-makers. This guide stresses an aesthetic, auteuristic approach and touches upon film production procedures. The films recommended for study range in technique from…

Evaluation of a Modified User Guide for Hearing Aid Management.

Science.gov (United States)

Caposecco, Andrea; Hickson, Louise; Meyer, Carly; Khan, Asaduzzaman

2016-01-01

This study investigated if a hearing aid user guide modified using best practice principles for health literacy resulted in superior ability to perform hearing aid management tasks, compared with the user guide in the original form. This research utilized a two-arm study design to compare the original manufacturer's user guide with a modified user guide for the same hearing aid--an Oticon Acto behind-the-ear aid with an open dome. The modified user guide had a lower reading grade level (4.2 versus 10.5), used a larger font size, included more graphics, and had less technical information. Eighty-nine adults ages 55 years and over were included in the study; none had experience with hearing aid use or management. Participants were randomly assigned either the modified guide (n = 47) or the original guide (n = 42). All participants were administered the Hearing Aid Management test, designed for this study, which assessed their ability to perform seven management tasks (e.g., change battery) with their assigned user guide. The regression analysis indicated that the type of user guide was significantly associated with performance on the Hearing Aid Management test, adjusting for 11 potential covariates. In addition, participants assigned the modified guide required significantly fewer prompts to perform tasks and were significantly more likely to perform four of the seven tasks without the need for prompts. The median time taken by those assigned the modified guide was also significantly shorter for three of the tasks. Other variables associated with performance on the Hearing Aid Management test were health literacy level, finger dexterity, and age. Findings indicate that the need to design hearing aid user guides in line with best practice principles of health literacy as a means of facilitating improved hearing aid management in older adults.

Study guide for college algebra and trigonometry

CERN Document Server

Snow, James W; Shapiro, Arnold

1981-01-01

Study Guide for College Algebra and Trigonometry is a supplement material to the basic text, College Algebra and Trigonometry. It is written to assist the student in learning mathematics effectively.The book provides detailed solutions to exercises found in the text. Students are encouraged to use these solutions to find a way to approach a problem. The Study Guide and Solutions Manual consists of four major components: basic concepts that should be learned from each unit, what was learned upon completion of each unit, solutions to selected problems, and a short chapter quiz, including the ans

CISO's guide to penetration testing a framework to plan, manage, and maximize benefits

CERN Document Server

Tiller, James S

2011-01-01

CISO's Guide to Penetration Testing: A Framework to Plan, Manage, and Maximize Benefits details the methodologies, framework, and unwritten conventions penetration tests should cover to provide the most value to your organization and your customers. Discussing the process from both a consultative and technical perspective, it provides an overview of the common tools and exploits used by attackers along with the rationale for why they are used. From the first meeting to accepting the deliverables and knowing what to do with the results, James Tiller explains what to expect from all phases of th

Wavefront-guided versus wavefront-optimized laser in situ keratomileusis: contralateral comparative study.

Science.gov (United States)

Padmanabhan, Prema; Mrochen, Michael; Basuthkar, Subam; Viswanathan, Deepa; Joseph, Roy

2008-03-01

To compare the outcomes of wavefront-guided and wavefront-optimized treatment in fellow eyes of patients having laser in situ keratomileusis (LASIK) for myopia. Medical and Vision Research Foundation, Tamil Nadu, India. This prospective comparative study comprised 27 patients who had wavefront-guided LASIK in 1 eye and wavefront-optimized LASIK in the fellow eye. The Hansatome (Bausch & Lomb) was used to create a superior-hinged flap and the Allegretto laser (WaveLight Laser Technologie AG), for photoablation. The Allegretto wave analyzer was used to measure ocular wavefront aberrations and the Functional Acuity Contrast Test chart, to measure contrast sensitivity before and 1 month after LASIK. The refractive and visual outcomes and the changes in aberrations and contrast sensitivity were compared between the 2 treatment modalities. One month postoperatively, 92% of eyes in the wavefront-guided group and 85% in the wavefront-optimized group had uncorrected visual acuity of 20/20 or better; 93% and 89%, respectively, had a postoperative spherical equivalent refraction of +/-0.50 diopter. The differences between groups were not statistically significant. Wavefront-guided LASIK induced less change in 18 of 22 higher-order Zernike terms than wavefront-optimized LASIK, with the change in positive spherical aberration the only statistically significant one (P= .01). Contrast sensitivity improved at the low and middle spatial frequencies (not statistically significant) and worsened significantly at high spatial frequencies after wavefront-guided LASIK; there was a statistically significant worsening at all spatial frequencies after wavefront-optimized LASIK. Although both wavefront-guided and wavefront-optimized LASIK gave excellent refractive correction results, the former induced less higher-order aberrations and was associated with better contrast sensitivity.

Matching Three Classifications of Secondary Students to Differential Levels of Study Guides.

Science.gov (United States)

Horton, Steven V.; And Others

1991-01-01

This study examined the effectiveness of matching 82 secondary students (learning disabled, remedial, and nondisabled) to differential levels of study guides. The study evaluated two treatment conditions (multilevel study guides containing different levels of referential cues, and single-level study guides without referential cues), used in…

Mathematics for physicists and engineers fundamentals and interactive study guide

CERN Document Server

Weltner, Klaus; Weber, Wolfgang J; Schuster, Peter; Grosjean, Jean

2014-01-01

This textbook offers an accessible and highly approved approach which is characterized by the combination of the textbook with a detailed study guide available online at our repository extras.springer.com. This study guide divides the whole learning task into small units which the student is very likely to master successfully. Thus he or she is asked to read and study a limited section of the textbook and to return to the study guide afterwards. Working with the study guide his or her learning results are controlled, monitored and deepened by graded questions, exercises, repetitions and finally by problems and applications of the content studied. Since the degree of difficulties is slowly rising the students gain confidence and experience their own progress in mathematical competence thus fostering motivation. Furthermore in case of learning difficulties he or she is given supplementary explanations and in case of individual needs supplementary exercises and applications. So the sequence of the studies is ind...

Work-rate-guided exercise testing in patients with incomplete spinal cord injury using a robotics-assisted tilt-table.

Science.gov (United States)

Laubacher, Marco; Perret, Claudio; Hunt, Kenneth J

2015-01-01

Robotics-assisted tilt-table (RTT) technology allows neurological rehabilitation therapy to be started early thus alleviating some secondary complications of prolonged bed rest. This study assessed the feasibility of a novel work-rate-guided RTT approach for cardiopulmonary training and assessment in patients with incomplete spinal cord injury (iSCI). Three representative subjects with iSCI at three distinct stages of primary rehabilitation completed an incremental exercise test (IET) and a constant load test (CLT) on a RTT augmented with integrated leg-force and position measurement and visual work rate feedback. Feasibility assessment focused on: (i) implementation, (ii) limited efficacy testing, (iii) acceptability. (i) All subjects were able follow the work rate target profile by adapting their volitional leg effort. (ii) During the IETs, peak oxygen uptake above rest was 304, 467 and 1378 ml/min and peak heart rate (HR) was 46, 32 and 65 beats/min above rest (subjects A, B and C, respectively). During the CLTs, steady-state oxygen uptake increased by 42%, 38% and 162% and HR by 12%, 20% and 29%. (iii) All exercise tests were tolerated well. The novel work-rate guided RTT intervention is deemed feasible for cardiopulmonary training and assessment in patients with iSCI: substantial cardiopulmonary responses were observed and the approach was found to be tolerable and implementable. Implications for Rehabilitation Work-rate guided robotics-assisted tilt-table technology is deemed feasible for cardiopulmonary assessment and training in patients with incomplete spinal cord injury. Robotics-assisted tilt-tables might be a good way to start with an active rehabilitation as early as possible after a spinal cord injury. During training with robotics-assisted devices the active participation of the patients is crucial to strain the cardiopulmonary system and hence gain from the training.

Rationale and design of the GUIDE-IT study: Guiding Evidence Based Therapy Using Biomarker Intensified Treatment in Heart Failure.

Science.gov (United States)

Felker, G Michael; Ahmad, Tariq; Anstrom, Kevin J; Adams, Kirkwood F; Cooper, Lawton S; Ezekowitz, Justin A; Fiuzat, Mona; Houston-Miller, Nancy; Januzzi, James L; Leifer, Eric S; Mark, Daniel B; Desvigne-Nickens, Patrice; Paynter, Gayle; Piña, Ileana L; Whellan, David J; O'Connor, Christopher M

2014-10-01

The GUIDE-IT (Guiding Evidence Based Therapy Using Biomarker Intensified Treatment in Heart Failure) study is designed to determine the safety, efficacy, and cost-effectiveness of a strategy of adjusting therapy with the goal of achieving and maintaining a target N-terminal pro-B-type natriuretic peptide (NT-proBNP) level of levels provide key prognostic information in patients with HF. Therapies proven to improve outcomes in patients with HF are generally associated with decreasing levels of NPs, and observational data show that decreases in NP levels over time are associated with favorable outcomes. Results from smaller prospective, randomized studies of this strategy thus far have been mixed, and current guidelines do not recommend serial measurement of NP levels to guide therapy in patients with HF. GUIDE-IT is a prospective, randomized, controlled, unblinded, multicenter clinical trial designed to randomize approximately 1,100 high-risk subjects with systolic HF (left ventricular ejection fraction ≤40%) to either usual care (optimized guideline-recommended therapy) or a strategy of adjusting therapy with the goal of achieving and maintaining a target NT-proBNP level of study are followed up at regular intervals and after treatment adjustments for a minimum of 12 months. The primary endpoint of the study is time to cardiovascular death or first hospitalization for HF. Secondary endpoints include time to cardiovascular death and all-cause mortality, cumulative mortality, health-related quality of life, resource use, cost-effectiveness, and safety. The GUIDE-IT study is designed to definitively assess the effects of an NP-guided strategy in high-risk patients with systolic HF on clinically relevant endpoints of mortality, hospitalization, quality of life, and medical resource use. (Guiding Evidence Based Therapy Using Biomarker Intensified Treatment in Heart Failure [GUIDE-IT]; NCT01685840). Copyright © 2014 American College of Cardiology Foundation

Thromboelastometry versus standard coagulation tests versus restrictive protocol to guide blood transfusion prior to central venous catheterization in cirrhosis: study protocol for a randomized controlled trial.

Science.gov (United States)

Rocha, Leonardo Lima; Pessoa, Camila Menezes Souza; Neto, Ary Serpa; do Prado, Rogerio Ruscitto; Silva, Eliezer; de Almeida, Marcio Dias; Correa, Thiago Domingos

2017-02-27

Liver failure patients have traditionally been empirically transfused prior to invasive procedures. Blood transfusion is associated with immunologic and nonimmunologic reactions, increased risk of adverse outcomes and high costs. Scientific evidence supporting empirical transfusion is lacking, and the best approach for blood transfusion prior to invasive procedures in cirrhotic patients has not been established so far. The aim of this study is to compare three transfusion strategies (routine coagulation test-guided - ordinary or restrictive, or thromboelastometry-guided) prior to central venous catheterization in critically ill patients with cirrhosis. Design and setting: a double-blinded, parallel-group, single-center, randomized controlled clinical trial in a tertiary private hospital in São Paulo, Brazil. adults (aged 18 years or older) admitted to the intensive care unit with cirrhosis and an indication for central venous line insertion. Patients will be randomly assigned to three groups for blood transfusion strategy prior to central venous catheterization: standard coagulation tests-based, thromboelastometry-based, or restrictive. The primary efficacy endpoint will be the proportion of patients transfused with any blood product prior to central venous catheterization. The primary safety endpoint will be the incidence of major bleeding. Secondary endpoints will be the proportion of transfusion of fresh frozen plasma, platelets and cryoprecipitate; infused volume of blood products; hemoglobin and hematocrit before and after the procedure; intensive care unit and hospital length of stay; 28-day and hospital mortality; incidence of minor bleeding; transfusion-related adverse reactions; and cost analysis. This study will evaluate three strategies to guide blood transfusion prior to central venous line placement in severely ill patients with cirrhosis. We hypothesized that thromboelastometry-based and/or restrictive protocols are safe and would significantly

EAP Study Recommendations and Score Gains on the IELTS Academic Writing Test

Science.gov (United States)

Green, Anthony

2005-01-01

The IELTS test is widely accepted by university admissions offices as evidence of English language ability. The test is also used to guide decisions about the amount of language study required for students to satisfy admissions requirements. Guidelines currently published by the British Association of Lecturers in English for Academic Purposes…

Relationship between relaxation by guided imagery and performance of working memory.

Science.gov (United States)

Hudetz, J A; Hudetz, A G; Klayman, J

2000-02-01

This study tested the hypothesis that relaxation by guided imagery improves working-memory performance of healthy participants. 30 volunteers (both sexes, ages 17-56 years) were randomly assigned to one of three groups and administered the WAIS-III Letter-Number Sequencing Test before and after 10-min. treatment with guided imagery or popular music. The control group received no treatment. Groups' test scores were not different before treatment. The mean increased after relaxation by guided imagery but not after music or no treatment. This result supports the hypothesis that working-memory scores on the test are enhanced by guided imagery and implies that human information processing may be enhanced by prior relaxation.

Mathematics for physicists and engineers fundamentals and interactive study guide

CERN Document Server

Weltner, Klaus; Grosjean, Jean; Schuster, Peter

2009-01-01

Mathematics is the basic language in physics and engineering. It is an essential tool which first and second year students have to master as soon as possible. A lack of competence in mathematics is the main reason for failure and drop out in the beginning periods of study. This textbook offers an accessible and highly approved approach which is characterized by the combination of the textbook with a detailed study guide available online at extras.springer.com. This study guide divides the whole learning task into small units which the student is very likely to master successfully. Thus he or she is asked to read and study a limited section of the textbook and to return to the study guide afterwards. Working with the study guide his or her learning results are controlled, monitored and deepened by graded questions, exercises, repetitions and finally by problems and applications of the content studied. Since the degree of difficulties is slowly rising the students gain confidence and experience their own progre...

Final Environmental Impact Statement for the Nevada Test Site and off- site locations in the state of Nevada: Reader's guide

International Nuclear Information System (INIS)

1996-08-01

This Reader's Guide is designed to help you find information in the US Departments of Energy's Nevada Test Site Environmental Impact Statement (NTS EIS). This Guide is divided into four sections: an introduction to the NTS EIS, specific topics, number conversions and scientific notations and public reading room locations

CCNA Cisco Certified Network Associate Study Guide

CERN Document Server

Lammle, Todd

2011-01-01

Learn from the Best - Cisco Networking Authority Todd LammleWritten by Cisco networking authority Todd Lammle, this comprehensive guide has been completely updated to reflect the latest CCNA 640-802 exam. Todd's straightforward style provides lively examples, hands on and written labs, easy-to-understand analogies, and real-world scenarios that will not only help you prepare for the exam, but also give you a solid foundation as a Cisco networking professional.This Study Guide teaches you how toDescribe how a network worksConfigure, verify and troubleshoot a switch with VLANs and interswitch co

Adjustable guide for a testing system for reactor pressure vessels

International Nuclear Information System (INIS)

Seifert, W.

1980-01-01

The device consisting of a guide rail and a manipulator is introduced into the gap between pressure vessel wall and biological shield by means of suspending wire drums and manipulator drums. For adjustment of the device an elbow telescope is used. The guide rail is fixed to the pressure vessel wall by means of electromagnets. The movements of the manipulator with respect to the guide rail are performed with the aid of a motor. (DG) [de

CCENT study guide exam 100-101 (ICND1)

CERN Document Server

Lammle, Todd

2013-01-01

The latest offering from Cisco Expert Todd Lammle for the New CCENT Certification Written by industry expert and Cisco networking guru, Todd Lammle, CCENT Study Guide improves on the popular Sybex Study Guide approach by providing 100 percent coverage of the ICND1 (#100-101) exam objectives. The book contains detailed information and examples on crucial Cisco networking topics, and provides practical examples and insights drawn from Todd's almost 30 years of real-world experience. You'll also have access to dozens of hands-on labs to get the necessary experience needed to pass

MCTS Microsoft Windows 7 Configuration Study Guide Exam 70-680

CERN Document Server

Panek, William

2011-01-01

A fully updated study guide for MCTS exam 70-680 Demand for experienced, qualified Windows 7 administrators remains high. IT professionals seeking certification in Windows 7 administration will find everything they need to learn to pass the MCTS exam (70-680) in this complete Sybex Study Guide. Updated to cover the most recent version of the exam, this comprehensive guide examines all the exam objectives, using real-world scenarios, hands-on exercises, and challenging review questions.Certification in Windows 7 administration is highly prized by IT professionals and employers; this comprehensi

Improved understanding of human anatomy through self-guided radiological anatomy modules.

Science.gov (United States)

Phillips, Andrew W; Smith, Sandy G; Ross, Callum F; Straus, Christopher M

2012-07-01

To quantifiably measure the impact of self-instructed radiological anatomy modules on anatomy comprehension, demonstrated by radiology, gross, and written exams. Study guides for independent use that emphasized structural relationships were created for use with two online radiology atlases. A guide was created for each module of the first year medical anatomy course and incorporated as an optional course component. A total of 93 of 96 eligible students participated. All exams were normalized to control for variances in exam difficulty and body region tested. An independent t-test was used to compare overall exam scores with respect to guide completion or incompletion. To account for aptitude differences between students, a paired t-test of each student's exam scores with and without completion of the associated guide was performed, thus allowing students to serve as their own controls. Twenty-one students completed no study guides; 22 completed all six guides; and 50 students completed between one and five guides. Aggregate comparisons of all students' exam scores showed significantly improved mean performance when guides were used (radiology, 57.8% [percentile] vs. 45.1%, P < .001; gross, 56.9% vs. 46.5%, P = .001; written, 57.8% vs. 50.2%, P = .011). Paired comparisons among students who completed between one and five guides demonstrated significantly higher mean practical exam scores when guides were used (radiology, 49.3% [percentile] vs. 36.0%, P = .001; gross, 51.5% vs. 40.4%, P = .005), but not higher written scores. Radiological anatomy study guides significantly improved anatomy comprehension on radiology, gross, and written exams. Copyright © 2012 AUR. Published by Elsevier Inc. All rights reserved.

CASP CompTIA Advanced Security Practitioner Study Guide Exam CAS-001

CERN Document Server

Gregg, Michael

2012-01-01

Get Prepared for CompTIA Advanced Security Practitioner (CASP) Exam Targeting security professionals who either have their CompTIA Security+ certification or are looking to achieve a more advanced security certification, this CompTIA Authorized study guide is focused on the new CompTIA Advanced Security Practitioner (CASP) Exam CAS-001. Veteran IT security expert and author Michael Gregg details the technical knowledge and skills you need to conceptualize, design, and engineer secure solutions across complex enterprise environments. He prepares you for aspects of the certification test that as

Development and Feasibility of a Structured Goals of Care Communication Guide.

Science.gov (United States)

Bekelman, David B; Johnson-Koenke, Rachel; Ahluwalia, Sangeeta C; Walling, Anne M; Peterson, Jamie; Sudore, Rebecca L

2017-09-01

Discussing goals of care and advance care planning is beneficial, yet how to best integrate goals of care communication into clinical care remains unclear. To develop and determine the feasibility of a structured goals of care communication guide for nurses and social workers. Developmental study with providers in an academic and Veterans Affairs (VA) health system (n = 42) and subsequent pilot testing with patients with chronic obstructive pulmonary disease or heart failure (n = 15) and informal caregivers (n = 4) in a VA health system. During pilot testing, the communication guide was administered, followed by semistructured, open-ended questions about the content and process of communication. Changes to the guide were made iteratively, and subsequent piloting occurred until no additional changes emerged. Provider and patient feedback to the communication guide. Iterative input resulted in the goals of care communication guide. The guide included questions to elicit patient understanding of and attitudes toward the future of illness, clarify values and goals, identify end-of-life preferences, and agree on a follow-up plan. Revisions to guide content and phrasing continued during development and pilot testing. In pilot testing, patients validated the importance of the topic; none said the goals of care discussion should not be conducted. Patients and informal caregivers liked the final guide length (∼30 minutes), felt it flowed well, and was clear. In this developmental and pilot study, a structured goals of care communication guide was iteratively designed, implemented by nurses and social workers, and was feasible based on administration time and acceptability by patients and providers.

Evaluation of Image-Guided Positioning for Frameless Intracranial Radiosurgery

International Nuclear Information System (INIS)

Lamba, Michael; Breneman, John C.; Warnick, Ronald E.

2009-01-01

Purpose: The standard for target alignment and immobilization in intracranial radiosurgery is frame-based alignment and rigid immobilization using a stereotactic head ring. Recent improvements in image-guidance systems have introduced the possibility of image-guided radiosurgery with nonrigid immobilization. We present data on the alignment accuracy and patient stability of a frameless image-guided system. Methods and Materials: Isocenter alignment errors were measured for in vitro studies in an anthropomorphic phantom for both frame-based stereotactic and frameless image-guided alignment. Subsequently, in vivo studies assessed differences between frame-based and image-guided alignment in patients who underwent frame-based intracranial radiosurgery. Finally, intratreatment target stability was determined by image-guided alignment performed before and after image-guided mask immobilized radiosurgery. Results: In vitro hidden target localization errors were comparable for the framed (0.7 ± 0.5 mm) and image-guided (0.6 ± 0.2 mm) techniques. The in vivo differences in alignment were 0.9 ± 0.5 mm (anteroposterior), -0.2 ± 0.4 mm (superoinferior), and 0.3 ± 0.5 mm (lateral). For in vivo stability tests, the mean distance differed between the pre- and post-treatment positions with mask-immobilized radiosurgery by 0.5 ± 0.3 mm. Conclusion: Frame-based and image-guided alignment accuracy in vitro was comparable for the system tested. In vivo tests showed a consistent trend in the difference of alignment in the anteroposterior direction, possibly due to torque to the ring and mounting system with frame-based localization. The mask system as used appeared adequate for patient immobilization.

DB2 10.1 fundamentals certification study guide

CERN Document Server

Sanders, Roger E

2014-01-01

Beginning with an explanation of the certification process and working through fundamental exam objectives, this guide gives test-takers all they need to know to pass IBM's DB2 10.1 Fundamentals certification exam (Exam 610). All the subjects covered on the exam are included: planning, security, data concurrency, working with databases and database objects, working with data using SQL and XQuery, working with DB2 tables, views, and indexes-and more. The book concludes with an

Feasibility study on the guided wave technique for condenser tube in NPP

International Nuclear Information System (INIS)

Choi, Sung Nam; Kim, Young Ho; Kim, Hyung Nam; Yoo, Hyun Joo; Hwang, W. G.

2004-01-01

The condenser tube is examined by the eddy current test (ECT) method to identify the integrity of the nuclear power plant. Because ECT probe is moved through the tube inside to identify flaws, the ECT probe should be exchanged periodically due to the wear of probe surface in order to remove the noise form the ECT signal. Moreover, it is impossible to examine the tube by ECT method because the ECT probe can not move through the inside due to the deformation such as dent. Recently, the theory of guided wave was established and the equipment applying the theory has been actively developed so as to overcome the limitation of ECT method for the tube inspection of heater exchanger in nuclear power plant. The object of this study is to know the feasibility of applying the guided wave technique to condenser tube in NPP

Summer Reading Camp Self-Study Guide. REL 2015-070

Science.gov (United States)

Smith, Kevin G.; Foorman, Barbara R.

2015-01-01

This guide is designed to facilitate self-studies of planning and implementation of state-required summer reading camp programs for grade 3 students who scored at the lowest level on the state reading assessment. It provides a template for data collection and guiding questions for discussion that may improve instruction and increase the number of…

[Drug susceptibility test guided therapy and novel empirical quadruple therapy for Helicobacter pylori infection: a network Meta-analysis].

Science.gov (United States)

Gou, Q Y; Yu, R B; Shi, R H

2017-05-10

Objective: To compare the efficacy and the risk of adverse effect of drug susceptibility test guided therapy and novel empirical quadruple therapy for Helicobacter ( H .) pylori infection. Methods: Literature retrieval was conducted by using major databases. Related papers published up to June 2015 were considered eligible if they were randomized control trials comparing different pharmacological formulations for H. pylori infection and used in a network Meta-analysis and a single rate Meta-analysis to evaluate the relative and absolute rates of H. pylori eradication and the risk of adverse effect. The Jadad score was used to evaluate the methodological quality. Funnel plot was constructed to evaluate the risk of publication bias. Begg's rank correlation test or Egger's regression intercept test was done for the asymmetry of funnel plot. Results: Twenty randomized control trials for the treatment of 6 753 initial treated patients with H. pylori infection were included. Drug susceptibility test guided therapy was significantly superior to concomitant therapy, hybrid therapy, sequential therapy and bismuth quadruple therapy. The culture-based therapy had the highest likelihood of improving clinical efficacy, with lowest risk of adverse effect. Concomitant therapy had the highest probability of causing adverse effect despite its effectiveness. Hybrid therapy and bismuth quadruple therapy were associated with lower risk of adverse effect and higher effectiveness. Conclusion: Drug susceptibility test guided therapy showed superiority to other 4 interventions for H. pylori eradication mentioned above. Hybrid therapy and bismuth quadruple therapy might be applied in the settings where the culture-based strategy is not available.

Asian Theatre: A Study Guide and Annotated Bibliography. "Theatre Perspectives" No. 1.

Science.gov (United States)

Brandon, James R., Ed.; Wichmann, Elizabeth, Ed.

This study guide/bibliography is intended to help the English language reader find materials for the study of Asian theatre. Containing 1,348 entries, the guide is the most extensive bibliography published to date. The guide is organized by geographical area: an initial chapter on Asia is followed by chapters on each of 16 countries: Burma,…

Pre-clinical testing of a phased array ultrasound system for MRI-guided noninvasive surgery of the brain--a primate study.

Science.gov (United States)

Hynynen, Kullervo; McDannold, Nathan; Clement, Greg; Jolesz, Ferenc A; Zadicario, Eyal; Killiany, Ron; Moore, Tara; Rosen, Douglas

2006-08-01

MRI-guided and monitored focused ultrasound thermal surgery of brain through intact skull was tested in three rhesus monkeys. The aim of this study was to determine the amount of skull heating in an animal model with a head shape similar to that of a human. The ultrasound beam was generated by a 512 channel phased array system (Exablate 3000, InSightec, Haifa, Israel) that was integrated within a 1.5-T MR-scanner. The skin was pre-cooled by degassed temperature controlled water circulating between the array surface and the skin. Skull surface temperature was measured with invasive thermocouple probes. The results showed that by applying surface cooling the skin and skull surface can be protected, and that the brain surface temperature becomes the limiting factor. The MRI thermometry was shown to be useful in detecting the tissue temperature distribution next to the bone, and it should be used to monitor the brain surface temperature. The acoustic intensity values during the 20 s sonications were adequate for thermal ablation in the human brain provided that surface cooling is used.

American Indian Studies. Library Research Guide.

Science.gov (United States)

White, Phillip M.

This guide to sources for students at San Diego State University doing library research in topics related to American Indian Studies begins by noting that information on North American Indians can be found in a variety of subject disciplines including history, anthropology, education, sociology, health care, law, business, and politics. The…

Guided acoustic wave inspection system

Science.gov (United States)

Chinn, Diane J.

2004-10-05

A system for inspecting a conduit for undesirable characteristics. A transducer system induces guided acoustic waves onto said conduit. The transducer system detects the undesirable characteristics of the conduit by receiving guided acoustic waves that contain information about the undesirable characteristics. The conduit has at least two sides and the transducer system utilizes flexural modes of propagation to provide inspection using access from only the one side of the conduit. Cracking is detected with pulse-echo testing using one transducer to both send and receive the guided acoustic waves. Thinning is detected in through-transmission testing where one transducer sends and another transducer receives the guided acoustic waves.

Regulatory Guide 1.131: Qualification tests of electric cables, field splices, and connections for light-water-cooled nuclear power plants

International Nuclear Information System (INIS)

Anon.

1992-01-01

Criterion III, ''Design Control,'' of Appendix B, ''Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plant,'' to 10 CFR Part 50, ''Licensing of Production and Utilization Facilities,'' requires that, where a test program is used to verify the adequacy of a specific design feature, it include suitable qualification testing of a prototype unit under the most adverse design conditions. This regulatory guide describes a method acceptable to the NRC staff for complying with the Commission's regulations with regard to qualification testing of electric cables, field splices, and connections for service in light-water-cooled nuclear power plants to ensure that the cables, field splices, and connections can perform their safety-related functions. The fire test provisions of this guide do not apply to qualification for an installed configuration

Automated Real-Time Needle-Guide Tracking for Fast 3-T MR-guided Transrectal Prostate Biopsy: A Feasibility Study

NARCIS (Netherlands)

Zamecnik, P.; Schouten, M.G.; Krafft, A.J.; Maier, F.; Schlemmer, H.-P.; Barentsz, J.O.; Bock, M. de; Futterer, J.J.

2014-01-01

Purpose To assess the feasibility of automatic needle-guide tracking by using a real-time phase-only cross correlation (POCC) algorithm-based sequence for transrectal 3-T in-bore magnetic resonance (MR)-guided prostate biopsies. Materials and Methods This study was approved by the ethics review

A guide to archival collections relating to radioactive fallout from nuclear weapon testing

International Nuclear Information System (INIS)

Martin, B.W.

1992-09-01

This ninth edition of A Guide to Archival Collections Relating to Radioactive Fallout from Nuclear Weapon Testing constitutes History Associates Incorporated's (HAI) final report of its document collection, processing, and declassification efforts for the Nevada Field Office of the Department of Energy. The most significant feature of this edition is the updated HAI collection effort information. We confirmed the accuracy of this information using our screening, processing, and transmittal records. Unlike previous editions, funding limitations prevented us from systematically revising the collection descriptions and point-of-contact information for this final edition. This guide has been prepared by professional historians who have a working knowledge of many of the record collections included in the following pages. In describing materials, they have tried to include enough information so that persons unfamiliar with the complexities of large record systems will be able to determine that nature of the information in, and the quality of, each record collection

Running Performance of a Pinning-Type Superconducting Magnetic Levitation Guide

International Nuclear Information System (INIS)

Okano, M; Iwamoto, T; Furuse, M; Fuchino, S; Ishii, I

2006-01-01

A pinning-type superconducting magnetic levitation guide with bulk high-Tc superconductors was studied for use as a goods transportation system, an energy storage system, etc. A superconducting magnetic levitation running test apparatus with a circular track of ca. 38 m length, 12 m diameter, which comprises the magnetic rail constituted by Nd-B-Fe rare-earth permanent magnets and steel plates, was manufactured to examine loss and high-speed performance of the magnetic levitation guide. Running tests were conducted in air. These tests clarify that a vehicle supported by a superconducting magnetic levitation guide runs stably at speeds greater than 42 km/h above the circular track

Running Performance of a Pinning-Type Superconducting Magnetic Levitation Guide

Science.gov (United States)

Okano, M.; Iwamoto, T.; Furuse, M.; Fuchino, S.; Ishii, I.

2006-06-01

A pinning-type superconducting magnetic levitation guide with bulk high-Tc superconductors was studied for use as a goods transportation system, an energy storage system, etc. A superconducting magnetic levitation running test apparatus with a circular track of ca. 38 m length, 12 m diameter, which comprises the magnetic rail constituted by Nd-B-Fe rare-earth permanent magnets and steel plates, was manufactured to examine loss and high-speed performance of the magnetic levitation guide. Running tests were conducted in air. These tests clarify that a vehicle supported by a superconducting magnetic levitation guide runs stably at speeds greater than 42 km/h above the circular track.

CHANGE DETECTION VIA SELECTIVE GUIDED CONTRASTING FILTERS

Directory of Open Access Journals (Sweden)

Y. V. Vizilter

2017-05-01

Full Text Available Change detection scheme based on guided contrasting was previously proposed. Guided contrasting filter takes two images (test and sample as input and forms the output as filtered version of test image. Such filter preserves the similar details and smooths the non-similar details of test image with respect to sample image. Due to this the difference between test image and its filtered version (difference map could be a basis for robust change detection. Guided contrasting is performed in two steps: at the first step some smoothing operator (SO is applied for elimination of test image details; at the second step all matched details are restored with local contrast proportional to the value of some local similarity coefficient (LSC. The guided contrasting filter was proposed based on local average smoothing as SO and local linear correlation as LSC. In this paper we propose and implement new set of selective guided contrasting filters based on different combinations of various SO and thresholded LSC. Linear average and Gaussian smoothing, nonlinear median filtering, morphological opening and closing are considered as SO. Local linear correlation coefficient, morphological correlation coefficient (MCC, mutual information, mean square MCC and geometrical correlation coefficients are applied as LSC. Thresholding of LSC allows operating with non-normalized LSC and enhancing the selective properties of guided contrasting filters: details are either totally recovered or not recovered at all after the smoothing. These different guided contrasting filters are tested as a part of previously proposed change detection pipeline, which contains following stages: guided contrasting filtering on image pyramid, calculation of difference map, binarization, extraction of change proposals and testing change proposals using local MCC. Experiments on real and simulated image bases demonstrate the applicability of all proposed selective guided contrasting filters. All

The social role of C-reactive protein point-of-care testing to guide antibiotic prescription in Northern Thailand.

Science.gov (United States)

Haenssgen, Marco J; Charoenboon, Nutcha; Althaus, Thomas; Greer, Rachel C; Intralawan, Daranee; Lubell, Yoel

2018-04-01

New and affordable point-of-care testing (POCT) solutions are hoped to guide antibiotic prescription and to help limit antimicrobial resistance (AMR)-especially in low- and middle-income countries where resource constraints often prevent extensive diagnostic testing. Anthropological and sociological research has illuminated the role and impact of rapid point-of-care malaria testing. This paper expands our knowledge about the social implications of non-malarial POCT, using the case study of a C-reactive-protein point-of-care testing (CRP POCT) clinical trial with febrile patients at primary-care-level health centres in Chiang Rai province, northern Thailand. We investigate the social role of CRP POCT through its interactions with (a) the healthcare workers who use it, (b) the patients whose routine care is affected by the test, and (c) the existing patient-health system linkages that might resonate or interfere with CRP POCT. We conduct a thematic analysis of data from 58 purposively sampled pre- and post-intervention patients and healthcare workers in August 2016 and May 2017. We find widespread positive attitudes towards the test among patients and healthcare workers. Patients' views are influenced by an understanding of CRP POCT as a comprehensive blood test that provides specific diagnosis and that corresponds to notions of good care. Healthcare workers use the test to support their negotiations with patients but also to legitimise ethical decisions in an increasingly restrictive antibiotic policy environment. We hypothesise that CRP POCT could entail greater patient adherence to recommended antibiotic treatment, but it could also encourage riskier health behaviour and entail potentially adverse equity implications for patients across generations and socioeconomic strata. Our empirical findings inform the clinical literature on increasingly propagated point-of-care biomarker tests to guide antibiotic prescriptions, and we contribute to the anthropological and

A new adjustable parallel drill guide for internal fixation of femoral neck fracture: a developmental and experimental study.

Science.gov (United States)

Yuenyongviwat, Varah; Tuntarattanapong, Pakjai; Tangtrakulwanich, Boonsin

2016-01-11

Internal fixation is one treatment for femoral neck fracture. Some devices and techniques reported improved accuracy and decreased fluoroscopic time. However, these are not widely used nowadays due to the lack of available special instruments and techniques. To improve the surgical procedure, the authors designed a new adjustable drill guide and tested the efficacy of the device. The authors developed a new adjustable drill guide for cannulated screw guide wire insertion for multiple screw fixation. Eight orthopaedic surgeons performed the experimental study to evaluate the efficacy of this device. Each surgeon performed guide wire insertion for multiple screw fixation in six synthetic femurs: three times with the new device and three times with the conventional technique. The fluoroscopic time, operative time and surgeon satisfaction were evaluated. In the operations with the new adjustable drill guide, the fluoroscopic and operative times were significantly lower than the operations with the conventional technique (p level of satisfaction of this device was also statistically significantly better (p = 0.02) than the conventional technique. The fluoroscopic and operative times with the new adjustable drill guide were reduced for multiple screw fixation of femoral neck fracture and the satisfaction of the surgeons was good.

Fractional Flow Reserve-guided Percutaneous Coronary Intervention: Standing the Test of Time

Directory of Open Access Journals (Sweden)

Frederik M. Zimmermann, MD

2016-05-01

Full Text Available Percutaneous coronary intervention (PCI improves symptoms and prognosis in ischemia-inducing, functionally significant, coronary lesions. Use of fractional flow reserve allows physicians to investigate the ischemia-inducing potential of a specific lesion and can be used to guide coronary revascularization, especially in multivessel coronary artery disease. Fractional flow reserve-guided PCI has been extensively investigated. Results show that deferral of stenting in non-significant lesions is safe, whereas deferral of stenting in functionally significant lesions worsens outcome. FFR-guided PCI improves outcome in multivessel disease over angiography-guided PCI. Until recently, there was little known about the long-term outcome of FFR-guided revascularization and its validity in acute coronary syndromes. This review aims to address the new evidence regarding long-term appropriateness of FFR-guided PCI, the need for hyperemia to evaluate functional severity, and the use of FFR in acute coronary syndromes.

Consumer Citizenship Curriculum Guides for Social Studies, English, Science, Mathematics.

Science.gov (United States)

MacKenzie, Louise; Smith, Alice

These four consumer citizenship curriculum guides for social studies, English, science, and mathematics incorporate consumer education into these subject matter areas in grades 8-12. Each guide is organized around 10 main component/goals. They are basic economics in the marketplace, credit, consumer law/protection, banking skills, comparison…

Post-examination interpretation of objective test data: monitoring and improving the quality of high-stakes examinations--a commentary on two AMEE Guides.

Science.gov (United States)

Tavakol, Mohsen; Dennick, Reg

2012-01-01

As great emphasis is rightly placed upon the importance of assessment to judge the quality of our future healthcare professionals, it is appropriate not only to choose the most appropriate assessment method, but to continually monitor the quality of the tests themselves, in a hope that we may continually improve the process. This article stresses the importance of quality control mechanisms in the exam cycle and briefly outlines some of the key psychometric concepts including reliability measures, factor analysis, generalisability theory and item response theory. The importance of such analyses for the standard setting procedures is emphasised. This article also accompanies two new AMEE Guides in Medical Education (Tavakol M, Dennick R. Post-examination Analysis of Objective Tests: AMEE Guide No. 54 and Tavakol M, Dennick R. 2012. Post examination analysis of objective test data: Monitoring and improving the quality of high stakes examinations: AMEE Guide No. 66) which provide the reader with practical examples of analysis and interpretation, in order to help develop valid and reliable tests.

Implementing LibGuides 2: An Academic Case Study

Science.gov (United States)

Duncan, Vicky; Lucky, Shannon; McLean, Jaclyn

2015-01-01

Since 1997, the University of Saskatchewan Library has used "subject pages" to highlight key library resources. When Springshare announced it was launching LibGuides v2, a project team was assembled to transition a mixture of locally produced guides and guides created with the original LibGuides v1 software. This article synthesizes best…

Guide to good practices for developing and conducting case studies: DOE handbook

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-01-01

Learning from experience is often very costly to a facility in terms of injured personnel, damaged equipment, and wasted time. Learning from the experience gained at the facility and from industry can prevent repeating costly mistakes. This guide contains a method for learning from experience to prevent mistakes from occurring; that method is the case study. This guide describes how to develop and present case studies. This guide provides the instructional developer insight on the best kind of case study to use and includes examples of the various types of case studies.

An experimental study on feasibility of ex-vessel cooling through the external guide vessel

International Nuclear Information System (INIS)

Kang, Kyoung-Ho; Kim, Jong-Hwan; Park, Rae-Jun; Kim, Sang-Baik

2000-01-01

This paper presents the results of a series of experiments for assessing the efficacy of ex-vessel cooling through the external guide vessel during a severe accident. Four tests were performed in the LAVA test facility at KAERI, varying the boundary conditions at the outer surface of the vessel. The first test was a dry condition test conducted without cooling the outside of the vessel. On the other hand, in the second test, the cooling of the vessel surface was produced by gravity-driven forced injection of water along the annular gap of 25 mm between the vessel and the external guide vessel. Water flow rate was about 0.85 kg/s and total mass of available water was 300 kg. For the evaluation of the water flow rate effect, the third test was performed with a pool type cooling in the annulus without any circulation of water. These two external cooling tests were performed under elevated pressure of about 1.6 MPa. Finally, the fourth test was conducted under atmospheric pressure to evaluate the effect of system pressure on boiling heat transfer characteristics. In the dry test and the pool type ex-vessel cooling test performed under atmospheric pressure, the vessel was failed by a melt penetration at about 40 degree upper position from the vessel bottom, which is coincident with the boundary of the Al 2 O 3 /Fe melt separated layers. On the other hand, in both of the ex-vessel cooling tests conducted under elevated pressure of about 1.6 MPa, the vessel didn't fail. Compared with the pool boiling test, the vessel experienced effective cooling due to the inlet flow in the forced flow test. Synthesized the results of the tests, it was shown that the heat removal with ex-vessel cooling through the guide vessel is feasible, but the additional evaluations should be performed to guarantee enough thermal margin. (author)

CEH certified ethical hacker : version 8 : study guide

CERN Document Server

Oriyano, Sean-Philip

2014-01-01

Prepare for the new Certified Ethical Hacker version 8 exam with this Sybex guide Security professionals remain in high demand. The Certified Ethical Hacker is a one-of-a-kind certification designed to give the candidate a look inside the mind of a hacker. This study guide provides a concise, easy-to-follow approach that covers all of the exam objectives and includes numerous examples and hands-on exercises. Coverage includes cryptography, footprinting and reconnaissance, scanning networks, enumeration of services, gaining access to a system, Trojans, viruses, worms, covert channels, and muc

IEEE Std 101-1987: IEEE guide for the statistical analysis of thermal life test data

International Nuclear Information System (INIS)

Anon.

1992-01-01

This revision of IEEE Std 101-1972 describes statistical analyses for data from thermally accelerated aging tests. It explains the basis and use of statistical calculations for an engineer or scientist. Accelerated test procedures usually call for a number of specimens to be aged at each of several temperatures appreciably above normal operating temperatures. High temperatures are chosen to produce specimen failures (according to specified failure criteria) in typically one week to one year. The test objective is to determine the dependence of median life on temperature from the data, and to estimate, by extrapolation, the median life to be expected at service temperature. This guide presents methods for analyzing such data and for comparing test data on different materials

A personalized mobile patient guide system for a patient-centered smart hospital: Lessons learned from a usability test and satisfaction survey in a tertiary university hospital.

Science.gov (United States)

Yoo, Sooyoung; Jung, Se Young; Kim, Seok; Kim, Eunhye; Lee, Kee-Hyuck; Chung, Eunja; Hwang, Hee

2016-07-01

The present study focused on the design, implementation, and evaluation of a personalized mobile patient guide system that utilizes smart phones, indoor navigation technology and a hospital information system (HIS) to address the difficulties that outpatients face in finding hospital facilities, recognizing their daily treatment schedule, and accessing personalized medical and administrative information. The present study was conducted in a fully digitized tertiary university hospital in South Korea. We developed a real-time location-based outpatient guide system that consists of Bluetooth access points (APs) for indoor navigation, an Android-based guide application, a guide server, and interfaces with the HIS. A total of 33 subjects and 43 outpatients participated in the usability test (UT) and the satisfaction survey, respectively. We confirmed that the indoor navigation feature can be applied to outpatient departments with precision using a position error test. The participants in the UT completed each scenario with an average success rate of 67.4%. According to the results, we addressed the problems and made improvements to the user interface by providing users with context-based guidance information. The satisfaction rating of the system was high, with an average score of 4.0 out of 5.0, showing its utility as a patient-centered hospital service. The innovative mobile patient guide system for outpatients is feasible and can be successfully implemented to provide personalized information with high satisfaction. Additionally, the issues identified and lessons learned from our experiences regarding task scheduling, indoor navigation, and usability should be considered when developing the system. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Review on conformance of JMTR reactor facility to safety design examination guides for water-cooled reactors for test and research

International Nuclear Information System (INIS)

Ide, Hiroshi; Naka, Michihiro; Sakuta, Yoshiyuki; Hori, Naohiko; Matsui, Yoshinori; Miyazawa, Masataka

2009-03-01

The safety design examination guides for water-cooled reactors for test and research are formulated as fundamental judgements on the basic design validity for licensing from a viewpoint of the safety. Taking the refurbishment opportunity of the JMTR, the conformance of the JMTR reactor facility to current safety design examination guides was reviewed with licensing documents, annexes and related documents. As a result, it was found that licensing documents fully satisfied the requirements of the current guides. Moreover, it was found that the JMTR reactor facility itself also satisfied the guides requirements as well as the safety performance, since the facility with safety function such as structure, systems, devices had been installed based on the licensing documents under the permission by the regulation authority. Important devices for safety have been produced under authorization of regulating authority. Therefore, it was confirmed that the licensing was conformed to guides, and that the JMTR has enough performance. (author)

Nasogastric tube placement with video-guided laryngoscope: A manikin simulator study.

Science.gov (United States)

Lee, Xiao-Lun; Yeh, Li-Chun; Jin, Yau-Dung; Chen, Chun-Chih; Lee, Ming-Ho; Huang, Ping-Wun

2017-08-01

This study aimed to investigate video-guided laryngoscopy for nasogastric tube placement. This was an observational comparative study performed in a hospital. The participants included volunteers from the medical staff (physicians and nurses) experienced with nasogastric intubation, and non-medical staff (medical students, pharmacists and emergent medical technicians) with knowledge of nasogastric intubation but lacking procedural experience. Medical and non-medical hospital staff performed manual, laryngoscope-assisted and video-guided laryngoscope nasogastric intubation both in the presence and in the absence of an endotracheal tube, using a manikin. Nasogastric intubation times were compared between groups and methods. Using the video-guided laryngoscope resulted in a significantly shorter intubation time compared to the other 2 methods, both with and without an endotracheal tube, for the medical and non-medical staff alike (all p guided laryngoscope without endotracheal intubation, direct laryngoscope with endotracheal intubation and video-guided laryngoscope with endotracheal intubation compared to manual intubation without endotracheal intubation (0.49, 0.63 and 0.72 vs. 5.63, respectively, p ≤ 0.008). For non-medical staff, nasogastric intubation time was significantly shorter using video-guided laryngoscope without endotracheal intubation, direct laryngoscope with endotracheal intubation and video-guided laryngoscope with endotracheal intubation compared to manual intubation without endotracheal intubation (1.67, 1.58 and 0.95 vs. 6.9, respectively, p ≤ 0.002). And mean nasogastric intubation time for video-guided laryngoscope endotracheal intubation was significantly shorter for medical staff than for non-medical staff (0.49 vs. 1.67 min, respectively, p = 0.041). Video-guided laryngoscope reduces nasogastric intubation time compared to manual and direct laryngoscope intubation, which promotes a consistent technique when performed by

Study Guide for First Aid Practices.

Science.gov (United States)

Thygerson, Alton L.

This study guide is designed to accompany the American National Red Cross texts ADVANCED FIRST AID AND EMERGENCY CARE and STANDARD FIRST AID AND PERSONAL SAFETY. Part one serves as an introduction to first aid. The legal aspects of first aid are discussed along with a list of suggested first aid kit contents, and information on first aid books is…

In Vivo Tooth-Supported Implant Surgical Guides Fabricated With Desktop Stereolithographic Printers: Fully Guided Surgery Is More Accurate Than Partially Guided Surgery.

Science.gov (United States)

Bencharit, Sompop; Staffen, Adam; Yeung, Matthew; Whitley, Daniel; Laskin, Daniel M; Deeb, George R

2018-02-21

Desktop stereolithographic printers combined with intraoral scanning and implant planning software promise precise and cost-effective guided implant surgery. The purpose of the present study was to determine the overall range of accuracy of tooth-supported guided implant surgery using desktop printed stereolithographic guides. A cross-sectional study comparing fully and partially guided implant surgery was conducted. Preoperative cone beam computed tomography (CBCT) and intraoral scans were used to plan the implant sites. Surgical guides were then fabricated using a desktop stereolithographic 3-dimensional printer. Postoperative CBCT was used to evaluate the accuracy of placement. Deviations from the planned positions were used as the primary outcome variables. The planning software used, implant systems, and anterior/posterior positions were the secondary outcome variables. The differences between the planned and actual implant positions in the mesial, distal, buccal, and lingual dimensions and buccolingual angulations were determined, and the accuracy was compared statistically using the 1-tail F-test (P = .01), box plots, and 95% confidence intervals for the mean. Sixteen partially edentulous patients requiring placement of 31 implants were included in the present study. The implant deviations from the planned positions for mesial, distal, buccal, and lingual dimensions and buccolingual angulations with the fully guided protocol (n = 20) were 0.17 ± 0.78 mm, 0.44 ± 0.78 mm, 0.23 ± 1.08 mm, -0.22 ± 1.44 mm, and -0.32° ± 2.36°, respectively. The corresponding implant deviations for the partially guided protocol (n = 11) were 0.33 ± 1.38 mm, -0.03 ± 1.59 mm, 0.62 ± 1.15 mm, -0.27 ± 1.61 mm, and 0.59° ± 6.83°. The difference between the variances for fully and partially guided surgery for the distal and angulation dimensions was statistically significant (P = .006 and P guided implant surgery is more accurate than

The Development of Environmental Guide Training Activities For Conservation Tourism in Ubonrat District, Khonkean

Directory of Open Access Journals (Sweden)

Kosin Sata

2016-10-01

Full Text Available The purposes of this research on the development of training activities environmental guide to environmental conservation tourism Ubonrat district, Khonkean province were to 1 To study the problem of tourist place in ubonrat district Khonkean province, 2 to develop training activities environmental guide to environmental conservation tourism Ubonrat district, Khonkean province 3 to study and compare the knowledge, attitude and skills as a guide about ecotourism in Ubonrat district before and after the training. The sample were of 50 youth in Ubonrat district, who voluntarily participated in training. The research tools were the manual training activities environmental guide to environmental conservation tourism Ubonrat district, Khonkaen province, knowledge test, attitude test and skills test as a environmental guide. The statistical analysis of data were percentage, mean, standard deviation, and Paired t-test. results showed that the tourist attraction in Ubonrat district, Khonkean province had importance 3 source ; Nam Phong national park, Ubolrat Dam, Phu koa–Phu Phan kham national park. The findings revealed that environmental guide training activities development for ecotourism had approviatences. Comparing the score of knowledge, attitude and skill as a environmental guide of youths after the training higher than those before the training at .05 level of significance.

Self-Study Guide for Florida VPK Provider Improvement Plan Development

Science.gov (United States)

Phillips, Beth M.; Mazzeo, Debbie; Smith, Kevin

2016-01-01

This Self-Study Guide has been developed to support Florida Voluntary Prekindergarten Providers (VPK) who are required to complete an improvement plan process (i.e., low-performing providers). The guide has sections that can be used during both the process of selecting target areas for an improvement plan and the process of implementing new or…

Standard guide for preparing and interpreting precision and bias statements in test method standards used in the nuclear industry

CERN Document Server

American Society for Testing and Materials. Philadelphia

1992-01-01

1.1 This guide covers terminology useful for the preparation and interpretation of precision and bias statements. 1.2 In formulating precision and bias statements, it is important to understand the statistical concepts involved and to identify the major sources of variation that affect results. Appendix X1 provides a brief summary of these concepts. 1.3 To illustrate the statistical concepts and to demonstrate some sources of variation, a hypothetical data set has been analyzed in Appendix X2. Reference to this example is made throughout this guide. 1.4 It is difficult and at times impossible to ship nuclear materials for interlaboratory testing. Thus, precision statements for test methods relating to nuclear materials will ordinarily reflect only within-laboratory variation.

CompTIA Network+ Study Guide Exam N10-005

CERN Document Server

Lammle, Todd

2012-01-01

Todd Lammle's latest CompTIA Network+ Study Guide, now updated for the new exam! CompTIA's Network+ certification tells the world you have the skills to install, configure, and troubleshoot today's basic networking hardware peripherals and protocols. But first, you have to pass the exam! This detailed CompTIA Authorized study guide by networking guru Todd Lammle has everything you need to prepare for the CompTIA's new Network+Exam N10-005. All exam objectives are covered. He thoroughly explains key topics, offers plenty of practical examples, and draws upon his own invaluable 25+ years of netw

The Science Manager's Guide to Case Studies

Energy Technology Data Exchange (ETDEWEB)

Branch, Kristi M.; Peffers, Melissa S.; Ruegg, Rosalie T.; Vallario, Robert W.

2001-09-24

This guide takes the science manager through the steps of planning, implementing, validating, communicating, and using case studies. It outlines the major methods of analysis, describing their relative merits and applicability while providing relevant examples and sources of additional information. Well-designed case studies can provide a combination of rich qualitative and quantitative information, offering valuable insights into the nature, outputs, and longer-term impacts of the research. An objective, systematic, and credible approach to the evaluation of U.S. Department of Energy Office of Science programs adds value to the research process and is the subject of this guide.

Advancing molecular-guided surgery through probe development and testing in a moderate cost evaluation pipeline

Science.gov (United States)

Pogue, Brian W.; Paulsen, Keith D.; Hull, Sally M.; Samkoe, Kimberley S.; Gunn, Jason; Hoopes, Jack; Roberts, David W.; Strong, Theresa V.; Draney, Daniel; Feldwisch, Joachim

2015-03-01

Molecular guided oncology surgery has the potential to transform the way decisions about resection are done, and can be critically important in areas such as neurosurgery where the margins of tumor relative to critical normal tissues are not readily apparent from visual or palpable guidance. Yet there are major financial barriers to advancing agents into clinical trials with commercial backing. We observe that development of these agents in the standard biological therapeutic paradigm is not viable, due to the high up front financial investment needed and the limitations in the revenue models of contrast agents for imaging. The hypothesized solution to this problem is to develop small molecular biologicals tagged with an established fluorescent reporter, through the chemical agent approval pathway, targeting a phase 0 trials initially, such that the initial startup phase can be completely funded by a single NIH grant. In this way, fast trials can be completed to de-risk the development pipeline, and advance the idea of fluorescence-guided surgery (FGS) reporters into human testing. As with biological therapies the potential successes of each agent are still moderate, but this process will allow the field to advance in a more stable and productive manner, rather than relying upon isolated molecules developed at high cost and risk. The pathway proposed and tested here uses peptide synthesis of an epidermal growth factor receptor (EGFR)-binding Affibody molecules, uniquely conjugated to IRDye 800CW, developed and tested in academic and industrial laboratories with well-established records for GMP production, fill and finish, toxicity testing, and early phase clinical trials with image guidance.

Study on operation I and C DCS test method of EPR project

International Nuclear Information System (INIS)

Meng Ying; Lv Zhihong; Huang Xinnian; Fan Haiying; Li Zhuojia; Xiao Shushu

2014-01-01

Through summarization and optimization of the method for operation I and C DCS test of the European pressurized reactor project, the conclusions play a guiding role on the operation I and C DCS test of the domestic advanced nuclear power plant. The study of the method focuses on the test platform, the test process and the optimization of method of operation I and C DCS test with the practical experience. The reasonable and reliable test method for operation I and C DCS test of the European pressurized reactor project is worthy of the reference and the development in the project of the domestic advanced nuclear power plant. (authors)

Equilibrium depth of scour at straight guide banks

Science.gov (United States)

Gjunsburgs, B.; Bulankina, V.

2017-10-01

The equilibrium stage of scour at the head of straight guide banks with a uniform and stratified bed conditions have been studied. The contraction of the river by bridge crossing with straight guide banks considerably alters the flow pattern. The streamlines become curve and the concentration of streamlines, longitudinal and transverse slopes of the water surface, a local increase in velocity, vortex and eddy structures, and the origin of a flow separation zone between the extreme streamlines and the guide bank are observed and local scour is developing at the head of the straight guide banks. New formulae for calculation of equilibrium depth of scour at straight guide banks at uniform and stratified river bed is elaborated and confirmed by tests and computer modelling results.

IEEE guide for planning of pre-operational testing programs for class 1E power systems for nuclear-power generating stations

International Nuclear Information System (INIS)

Anon.

1976-01-01

The Institute of Electrical and Electronics Engineers (IEEE) guide for pre-operational testing of Class 1E power systems for nuclear-power generating stations is presented. The guidelines apply to power systems both ac and dc supplies but not to the equipment which utilizes the ac and dc power. The pre-operational tests are performed after appropriate construction tests

Guide for International Peer Reviews of Decommissioning Cost Studies for Nuclear Facilities

International Nuclear Information System (INIS)

LaGuardia, Thomas S.; Pescatore, Claudio; )

2014-01-01

Peer reviews are a standard co-operative OECD working tool that offer member countries a framework to compare experiences and examine best practices in a host of areas. The OECD Nuclear Energy Agency (NEA) has developed a proven methodology for conducting peer reviews in radioactive waste management and nuclear R and D. Using this methodology, the NEA Radioactive Waste Management Committee's Working Party on Decommissioning and Dismantling (WPDD) developed the present guide as a framework for decommissioning cost reviewers and reviewees to prepare for and conduct international peer reviews of decommissioning cost estimate studies for nuclear facilities. It includes checklists that will help national programmes or relevant organisations to assess and improve decommissioning cost estimate practices in the future. This guide will act as the NEA reference for conducting such international peer reviews. The remainder of this guide is divided into eight chapters. Chapter 2 describes gathering the cost estimate study and underpinning documents, reviewing the study and writing a final report. Chapter 3 provides a detailed checklist approach for the review of the cost study report. Chapter 4 provides checklists to assist in reviewing benchmarked information. Chapter 5 provides comments on the approach and recommendations for use of this guide. Chapters 6 and 7 provide the background material used in developing this guide and Chapter 8 provides a list of the abbreviations and acronyms used in this guide

A Parent's Guide to the Social Studies. Revised.

Science.gov (United States)

Roselle, Daniel; Singleton, Laurel R.

This guide for parents seeks to answer seven questions concerning the social studies: (1) What is social studies? (2) Why is social studies important at every grade level? (3) What kinds of materials are used to teach social studies? (4) What teaching strategies are used in social studies classes? (5) What have the national reports on education…

Sample holder for studying temperature dependent particle guiding

International Nuclear Information System (INIS)

Bereczky, R.J.; Toekesi, K.; Kowarik, G.; Aumayr, F.

2011-01-01

Complete text of publication follows. The so called guiding effect is a complex process involving the interplay of a large number of charged particles with a solid. Although many research groups joined this field and carried out various experiments with insulator capillaries many details of the interactions are still unknown. We investigated the temperature dependence of the guiding since it opens new possibilities both for a fundamental understanding of the guiding phenomenon and for applications. For the temperature dependent guiding experiments a completely new heatable sample holder was designed. We developed and built such a heatable sample holder to make accurate and reproducible studies of the temperature dependence of the ion guiding effect possible. The target holder (for an exploded view see Fig. 1) consists of two main parts, the front and the back plates. The two plates of the sample holder, which function as an oven, are made of copper. These parts surround the capillary in order to guarantee a uniform temperature along the whole tube. The temperature of the copper parts is monitored by a K-Type thermocouple. Stainless steel coaxial heaters surrounding the oven are used for heating. The heating power up to a few watts is regulated by a PID controller. Cooling of the capillary is achieved by a copper feed-through connected to a liquid nitrogen bath outside the UHV chamber. This solution allows us to change the temperature of the sample from -30 deg C up to 90 deg C. Our experiments with this newly developed temperature regulated capillary holder show that the glass temperature (i.e. conductivity) can be used to control the guiding properties of the glass capillary and adjust the conditions from guiding at room temperature to simple geometrical transmission at elevated temperatures. This holds the promise to investigate the effect of conductivity on particle transport (build-up and removal of charge patches) through capillaries in more details

Body-mounted robotic instrument guide for image-guided cryotherapy of renal cancer

Science.gov (United States)

Hata, Nobuhiko; Song, Sang-Eun; Olubiyi, Olutayo; Arimitsu, Yasumichi; Fujimoto, Kosuke; Kato, Takahisa; Tuncali, Kemal; Tani, Soichiro; Tokuda, Junichi

2016-01-01

Purpose: Image-guided cryotherapy of renal cancer is an emerging alternative to surgical nephrectomy, particularly for those who cannot sustain the physical burden of surgery. It is well known that the outcome of this therapy depends on the accurate placement of the cryotherapy probe. Therefore, a robotic instrument guide may help physicians aim the cryotherapy probe precisely to maximize the efficacy of the treatment and avoid damage to critical surrounding structures. The objective of this paper was to propose a robotic instrument guide for orienting cryotherapy probes in image-guided cryotherapy of renal cancers. The authors propose a body-mounted robotic guide that is expected to be less susceptible to guidance errors caused by the patient’s whole body motion. Methods: Keeping the device’s minimal footprint in mind, the authors developed and validated a body-mounted, robotic instrument guide that can maintain the geometrical relationship between the device and the patient’s body, even in the presence of the patient’s frequent body motions. The guide can orient the cryotherapy probe with the skin incision point as the remote-center-of-motion. The authors’ validation studies included an evaluation of the mechanical accuracy and position repeatability of the robotic instrument guide. The authors also performed a mock MRI-guided cryotherapy procedure with a phantom to compare the advantage of robotically assisted probe replacements over a free-hand approach, by introducing organ motions to investigate their effects on the accurate placement of the cryotherapy probe. Measurements collected for performance analysis included accuracy and time taken for probe placements. Multivariate analysis was performed to assess if either or both organ motion and the robotic guide impacted these measurements. Results: The mechanical accuracy and position repeatability of the probe placement using the robotic instrument guide were 0.3 and 0.1 mm, respectively, at a depth

A Study on Elastic Guided Wave Modal Characteristics in Multi-Layered Structures

International Nuclear Information System (INIS)

Cho, Youn Ho; Lee, Chong Myoung

2008-01-01

In this study, we have developed a program which can calculate phase and group velocities, attenuation and wave structures of each mode in multi-layered plates. The wave structures of each mode are obtained, varying material properties and number of layers. The key in the success of guided wave NDE is how to optimize the mode selection scheme by minimizing energy loss when a structure is in contact with liquid. In this study, the normalized out-of-plane displacements at the surface of a free plate are used to predict the variation of modal attenuation and verily the correlation between attenuation and wave structure. It turns out that the guided wave attenuation can be efficiently obtain from the out-of-plane displacement variation of a free wave guide alleviating such mathematical difficulties in extracting complex roots for the eigenvalue problem of a liquid loaded wave guide. Through this study, the concert to optimize guided wave mode selection is accomplished to enhance sensitivity and efficiency in nondestructive evaluation for multi-layered structures.

CompTIA Security+ Deluxe Study Guide Exam SY0-301

CERN Document Server

Dulaney, Emmett

2011-01-01

Get a host of extras with this Deluxe version including a Security Administration Simulator!  Prepare for CompTIA's new Security+ exam SY0-301 with this Deluxe Edition of our popular CompTIA Security+ Study Guide, 5th Edition. In addition to the 100% coverage of all exam essentials and study tools you'll find in the regular study guide, the Deluxe Edition gives you over additional hands-on lab exercises and study tools, three additional practice exams, author videos, and the exclusive Security Administration simulator. This book is a CompTIA Recommended product. Provides 100% coverage of all e

Clinical study of ultrasound-guided percutaneous radiofrequency ablation for primary hepatic carcinoma adjacent to the diaphragm

Directory of Open Access Journals (Sweden)

LI Meng

2015-04-01

Full Text Available ObjectiveTo investigate the safety and efficacy of ultrasound (US-guided percutaneous radiofrequency ablation (RFA for primary hepatic carcinoma adjacent to the diaphragm. MethodsThis study included 277 patients with 362 lesions of primary hepatic carcinoma managed with US-guided percutaneous RFA in 302 Hospital of PLA from January 2011 to October 2014. Sixty-six patients with 71 hepatocellular carcinomas (HCCs located less than 5 mm from the diaphragm were in study group, and 95 patients with 114 HCCs located more than 10 mm from the hepatic surface were in control group. The patients′ symptoms and complications were observed after the therapy. The complete ablation rate, local tumor progression rate, and complication rate were compared between the two groups. Comparison of continuous data between the two groups was made by independent-samples t test, while comparison of categorical data was made by chi-square test. ResultsAt one month after operation, 65 (91.5% of 71 tumors in the study group and 107 (93.9% of 114 tumors in the control group achieved complete ablation, according to contrast-enhanced CT and MRI, and there was no significant difference between the two groups (χ2=0.36, P=0.55. The postoperative follow-up showed that the local tumor progression rates in the study group and control group were 16.9% and 13.2%, respectively, without significant difference between the two groups (χ2=0.49, P=0.48. In the study group, 22 patients developed adverse reactions, versus 37 patients in the control group (χ2=2.60, P=0.11. ConclusionUS-guided percutaneous RFA is a safe and effective means for the treatment of primary hepatic carcinoma adjacent to the diaphragm.

33 CFR 334.720 - Gulf of Mexico, south from Choctawhatchee Bay; guided missiles test operations area, Headquarters...

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Gulf of Mexico, south from..., DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DANGER ZONE AND RESTRICTED AREA REGULATIONS § 334.720 Gulf of Mexico, south from Choctawhatchee Bay; guided missiles test operations area, Headquarters Air Proving...

Comprehensive Evaluation and Classification of Interchange Diagrammatic Guide Signs’ Complexity

OpenAIRE

Li, Yang; Zhao, Xiaohua; He, Qing; Huang, Lihua; Rong, Jian

2018-01-01

The effectiveness of interchange diagrammatic guide signs has significant meaning in traffic safety and driver’s understanding. This paper presented a comprehensive evaluation and classification of interchange diagrammatic guide signs’ complexity. The effectiveness of interchange diagrammatic guide signs relies on how well road users can understand those diagrams. This study tested 37 types of diagrams on the visual recognition complexity degree in three levels, general level, partial level, ...

LPIC-2 Linux Professional Institute Certification Study Guide Exams 201 and 202

CERN Document Server

Smith, Roderick W

2011-01-01

The first book to cover the LPIC-2 certification Linux allows developers to update source code freely, making it an excellent, low-cost, secure alternative to alternate, more expensive operating systems. It is for this reason that the demand for IT professionals to have an LPI certification is so strong. This study guide provides unparalleled coverage of the LPIC-2 objectives for exams 201 and 202. Clear and concise coverage examines all Linux administration topics while practical, real-world examples enhance your learning process. On the CD, you'll find the Sybex Test Engine, electronic flash

Student Study Guide - Water Quality Monitoring Approach to Watershed Studies. Presumpscot River Education Project.

Science.gov (United States)

Bennett, Dean B.; Zaitlin, Samuel

This guide is designed for both independent study and class use. It provides the basis for a unit in a science class for the secondary school level. At the undergraduate college level, it provides an outline of activities for a contract as part of an education or science course. The lessons in the guide concentrate on the application of science…

VCP5 VMware Certified Professional on vSphere 5 Study Guide Exam VCP-510

CERN Document Server

Atkinson, Brian

2012-01-01

The ideal study guide for candidates seeking the leading virtualization certification The VMware Certified Professional on vSphere 5 (VCP-510) is the most desired certification for virtualization professionals, and this study guide covers all the requirements. Skill in virtualization is a top priority for companies when hiring IT staff, and VMware skills are in high demand. Part of the highly acclaimed Sybex Study Guide series, this comprehensive book guides you through planning, installing, and upgrading ESXi; configuring networking, storage, and vCenter Server; deploying and managing virtual

A Straight-bladed Vertical Axis Wind Turbine with a Directed Guide Vane Row-Effect of Guide Vane Geometry on the Performance-

Institute of Scientific and Technical Information of China (English)

Manabu TAKAO; Hideki KUMA; Takao MAEDA; Yasunari KAMADA; Michiaki OKI; Atsushi MINODA

2009-01-01

The objective of this study is to show the effect of guide vane geometry on the performance. In order to over-come the disadvantages of vertical axis wind turbine, a straight-bladed vertical axis wind turbine (S-VAWT) with a directed guide vane row has been proposed and tested by the authors. According to previous studies, it was clarified that the performance of the turbine can be improved by means of the directed guide vane row. However, the guide vane geometry of S-VAWT has not been optimized so far. In order to clarify the effect of guide vane geometry, the effects of setting angle and gap between rotor blade and guide vane on power coefficient and start-ing characteristic were investigated in the experiments. The experimental study of the proposed wind turbine was carded out by a wind tunnel. The wind tunnel with a diameter of 1.8m is open jet type. The wind velocity is 8 m/s in the experiments. The rotor has three straight blades with a profile of NACA0018 and a chord length of 100 mm, a diameter of 0.6 m and a blade height of 0.7 m. The guide vane row consists of 3 arc plates.

Be(ing) prepared: Guide and Scout participation, childhood social position and mental health at age 50-a prospective birth cohort study.

Science.gov (United States)

Dibben, Chris; Playford, Chris; Mitchell, Richard

2017-03-01

Mental health is a major concern in many countries. We explore whether youth participation in the Scouts and Guides could protect mental health in later life and in particular whether it might reduce inequalities in mental health associated with early life socioeconomic position. Using the 1958 birth cohort National Child Development Study, we tested whether Scouts-Guide attendance was associated with mental health (SF-36, Mental Health Index (MHI-5)) controlling for childhood risk factors and interacted with social class. Of the 9603 cohort members, 28% had participated in the Scouts-Guides. The average MHI-5 score was 74.8 (SD 18.2) at age 50. After adjustment, for potential childhood confounders, participation in Scouts-Guides was associated with a better MHI-5 score of 2.22 (CI 1.32 to 3.08). Among those who had not been a Scout-Guide, there was a gradient in mental health at age 50 by childhood social position, adjusting for other childhood risk factors. This gradient was absent among those who had been a Scout-Guide. Scout-Guides had an 18% lower odds of an MHI-5 score indicative of mood or anxiety disorder. The findings appeared robust to various tests for residual confounding. Participation in Guides or Scouts was associated with better mental health and narrower mental health inequalities, at age 50. This suggests that youth programmes that support resilience and social mobility through developing the potential for continued progressive self-education, 'soft' non-cognitive skills, self-reliance, collaboration and activities in natural environments may be protective of mental health in adulthood. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Tone burst generator for a Non-Destructive Testing system based on ultrasonic guided waves

OpenAIRE

Jiménez Sánchez, Daniel

2011-01-01

English: This PFC provides a design of a tested and specific tone-burst generator circuit for a Non-Destructive System based on ultrasonid guided waves. This circuit includes a complementary protection circuit for the NDT system working in a pulse-echo configuration. In this paper, a brief state f art about different driving circuits employed in distinct NDE systems is presented. Castellano: El PFC proporciona un diseño electrónico específico y probado de un circuito excitador de salvas (C...

CompTIA network+ study guide exam N10-006

CERN Document Server

Lammle, Todd

2015-01-01

All-star N10-006 prep, fully updated for the new exam The CompTIA Network+ Study Guide is your one-stop comprehensive resource in preparing for exam N10-006 Bestselling author and networking Guru Todd Lammle guides you through 100% of all exam objectives detailing the fundamental concepts you will need to know to prepare for the exam. Coverage includes network technologies, installation and configuration, media and topologies, security, and much more, plus practical examples drawn from real-world situations. You also gain access to practice exams and electronic flashcards that facilitate info

A new adjustable parallel drill guide for internal fixation of femoral neck fracture: a developmental and experimental study

OpenAIRE

Yuenyongviwat, Varah; Tuntarattanapong, Pakjai; Tangtrakulwanich, Boonsin

2016-01-01

Background Internal fixation is one treatment for femoral neck fracture. Some devices and techniques reported improved accuracy and decreased fluoroscopic time. However, these are not widely used nowadays due to the lack of available special instruments and techniques. To improve the surgical procedure, the authors designed a new adjustable drill guide and tested the efficacy of the device. Methods The authors developed a new adjustable drill guide for cannulated screw guide wire insertion fo...

VCA-DVC VMware certified associate on vSphere study guide VCAD-510

CERN Document Server

Schmidt, Robert

2015-01-01

Use this expert guide to prepare for the VCA-DCV exam VCA-DCV VMware Certified Associate on vSphere Study Guide: VCAD-510 is a comprehensive study guide for the VMware Certified Associate - Data Center Virtualization exam. Hands-on examples, real-world scenarios, and expert review questions cover the full exam blueprint, and the companion website offers a suite of tools to help you prepare for the exam including practice exams, electronic flashcards, and a glossary of key terms. In addition, the website includes videos that demonstrate how to complete the more challenging tasks. Focused on p

Thermal CFD Analysis of Tubular Light Guides

Directory of Open Access Journals (Sweden)

Ondřej Šikula

2013-12-01

Full Text Available Tubular light guides are applicable for daylighting of windowless areas in buildings. Despite their many positive indoor climate aspects they can also present some problems with heat losses and condensation. A computer CFD model focused on the evaluation of temperature distribution and air flow inside tubular light guides of different dimensions was studied. The physical model of the tested light guides of lengths more than 0.60 m proves shows that Rayleigh numbers are adequate for a turbulent air flow. The turbulent model was applied despite the small heat flux differences between the turbulent and laminar model. The CFD simulations resulted into conclusions that the growing ratio of length/diameter increases the heat transmission loss/linear transmittance as much as by 50 percent. Tubular light guides of smaller diameters have lower heat transmission losses compared to the wider ones of the same lengths with the same outdoor temperature being taken into account. The simulation results confirmed the thermal bridge effect of the tubular light guide tube inside the insulated flat roof details. The thermal transmittance of the studied light guides in the whole roof area was substituted with the point thermal bridges. This substitution gives possibility for simple thermal evaluation of the tubular light pipes in roof constructions.

Should EGFR mutations be tested in advanced lung squamous cell carcinomas to guide frontline treatment?

Science.gov (United States)

Chiu, Chao-Hua; Chou, Teh-Ying; Chiang, Chi-Lu; Tsai, Chun-Ming

2014-10-01

There is no argument over using epidermal growth factor receptor (EGFR) mutation status to guide the frontline treatment for advanced lung adenocarcinoma (LADC); however, the role of the testing in lung squamous cell carcinoma (LSQC) remains controversial. Currently, the guidelines/consensus statements regarding EGFR mutation testing in LSQC are not consistent among different oncology societies. American Society of Clinical Oncology recommends performing EGFR mutation testing in all patients; European Society for Medical Oncology, College of American Pathologists/International Association for the Study of Lung Cancer/Association for Molecular Pathology, and National Comprehensive Cancer Network suggest for some selected group. EGFR mutation is rarely found in LSQC; however, more importantly, it is not a valid predictive biomarker for EGFR tyrosine kinase inhibitors (EGFR-TKI) in LSQC as it has been shown in LADC. Available data showed that the response rate and progression-free survival in EGFR mutant LSQC patients treated with EGFR-TKI are not better than that observed in patients treated with platinum-doublet chemotherapy in the first-line setting. Therefore, in contrast to advanced LADC, EGFR mutation testing may not be necessarily performed upfront in advanced LSQC because not only the mutation rate is low, but also the predictive value is insufficient. For LSQC patients with known sensitizing-EGFR mutations, both conventional chemotherapy and EGFR-TKI are acceptable frontline treatment options.

Systematic study on the performance of elliptic focusing neutron guides

International Nuclear Information System (INIS)

Martin Rodriguez, D.; DiJulio, D.D.; Bentley, P.M.

2016-01-01

In neutron scattering experiments there is an increasing trend towards the study of smaller volume samples, which make the use of focusing optics more important. Focusing guide geometries based on conic-sections, such as those with parabolic and elliptic shapes, have been extensively used in both recently built neutron instruments and upgrades of existing hardware. A large fraction of proposed instruments at the European Spallation Source feature the requirement of good performance when measuring on small samples. The optimised design of a focusing system comes after time consuming Monte-Carlo (MC) simulations. Therefore, in order to help reduce the time needed to design such focusing systems, it is necessary to study systematically the performance of focusing guides. In the present work, we perform a theoretical analysis of the focusing properties of neutron beams, and validate them using a combination of Monte-Carlo simulations and Particle Swarm Optimisations (PSOs), where there is a close correspondence between the maximum divergence of the beam and the shape of the guide. The analytical results show that two limits can be considered, which bound a range of conic section shapes that provide optimum performance. Finally, we analyse a more realistic guide example and we give an assessment of the importance of the contribution from multiple reflections in different systems.

Experimental study on electrostatic guiding of supersonic D2O molecular beam with two charged wires

International Nuclear Information System (INIS)

Yin Yaling; Xia Yong; Chen Haibo; Yin Jianping

2007-01-01

We demonstrate the guiding of a supersonic heavy-water (D 2 O) molecular beam using a hollow electrostatic field generated by the combination of two parallel charged-wires and two grounded metal-plates, and report some new and preliminary experimental results. In the experiment, we detect the guiding signals by using the method of time-of-flight mass spectrum and study the dependence of the relative transmission of the beam guide on the guiding voltage. Our study shows that the relative transmission of the beam guide is increased linearly with increasing guiding voltage V guid , and the number of the guided D 2 O molecules is at least increased by 89.4% when the guiding voltage is +20.0 kV. Finally, some potential applications of our guiding scheme in the molecule optics are briefly discussed. (authors)

Official Study Guide for the Certified Park and Recreation Professional. Fourth Edition

Science.gov (United States)

Mulvaney, Michael A.; Hurd, Amy R.

2013-01-01

The "Official Study Guide for the CPRP Examination" provides up-to-date information in this new edition to assist the park and recreation professional in preparing for the CPRP examination. The study guide serves as an excellent source of information for any individual who works directly or indirectly in the field of park and recreation services.

A study on CT-guided stereotactic technique for functional neurosurgery

International Nuclear Information System (INIS)

Uetsuhara, Koichi; Asakura, Tetsuhiko; Hirahara, Kazuho; Gondo, Masazumi; Oda, Hiroshige

1987-01-01

Recently, CT-guided stereotactic surgery has become of major interest, and some authors have discussed its potential in functional neurosurgery. The following is a comparative study of the CT-guided stereotactic technique and the conventional roentogenographic stereotactic technique. The Brown-Roberts-Wells apparatus was used for both types of procedures. 37 stereotactic procedures were performed on 35 patients under local anesthesia; 16 for stereotactic biopsy and 21 for stereotactic functional neurosurgery. Target points for stereotactic biopsy were determined by the CT-guided technique and target points for functional neurosurgery were determined by the conventional roentogenographic technique. The correlation with the position of target point determined by both techniques was investigated in the 21 functional neurosurgical procedures. On these occasions the authors used the reformatted horizontal and sagittal CT through the anterior and posterior commissure to determine the position of target point by the CT-guided technique. Results: It was found that the AC-PC line crossed with Reid's base line at angle of 11 ± 1 deg, and therefore it is important to obtain a CT images including AC-PC line at this angle. When applying the CT guided stereotactic procedure for functional surgery, it should be known that there could be a discrepancy within 2 mm from the conventional target determination. (author)

Verification of neutron pad and 17 x 7 guide tube designs by preoperational tests on the Trojan I power plant

International Nuclear Information System (INIS)

Bloyd, C.N.; Singleton, N.R.; Ciaramitaro, W.

1976-05-01

The internals vibration measurement program carried out on the Trojan-1 reactor during preoperational testing is described. The flow induced response of a 17 x 17 guide tube and the neutron pad core barrel were deduced from the plant test data and compared with the expected responses. The results showed good agreement with expected vibration levels

The effectiveness of a parental guide for prevention of problematic video gaming in children: A public health randomized controlled intervention study.

Science.gov (United States)

Krossbakken, Elfrid; Torsheim, Torbjørn; Mentzoni, Rune Aune; King, Daniel Luke; Bjorvatn, Bjørn; Lorvik, Ingjerd Meen; Pallesen, Ståle

2018-03-01

Background and aims Excessive use of video games among children and adolescents is a growing concern. The aim of this study was to investigate the effectiveness of a brief parental guide with advices and strategies for regulating video gaming in children. Methods A random sample of guardians of children between the age of 8-12 years old (N = 5,864) was drawn from the Norwegian Population Registry and equally randomized into an intervention and a control condition. A parental guide based on clinical and research literature was distributed by postal mail to those in the intervention condition. A 4-month follow-up survey comprising questions about problematic video gaming, gaming behavior, sleep activity, and parental video game regulation behavior was administered. Results Independent t-tests revealed no significant differences between the two conditions (N = 1,657, response rate 30.1%) on any outcome measure. An ANOVA with planned comparisons showed that respondents who reported that they had read and followed the parental guide reported more video game problems and used more parental mediation strategies than those who did not read and follow the guide. Conclusions We found no evidence for the effectiveness of the psychoeducational parental guide on preventing problematic video gaming in children. However, the guide was read and positively assessed by a significant proportion of guardians. Differences between those who studied the guide and those who did not may indicate that parental guides are better aimed at providing important information to those who already have problems rather than as a mean of primary prevention.

Parent's Guide to Understanding Tests.

Science.gov (United States)

CTB / McGraw-Hill, Monterey, CA.

This brief introduction to testing is geared to parents. Types of tests are defined, such as standardized tests, achievement tests, norm referenced tests, criterion referenced tests, and aptitude tests. Various types of scores (grade equivalent, percentile rank, and stanine are also defined, and the uses made of tests by administrators, teachers,…

Consistency in color parameters of a commonly used shade guide.

Science.gov (United States)

Tashkandi, Esam

2010-01-01

The use of shade guides to assess the color of natural teeth subjectively remains one of the most common means for dental shade assessment. Any variation in the color parameters of the different shade guides may lead to significant clinical implications. Particularly, since the communication between the clinic and the dental laboratory is based on using the shade guide designation. The purpose of this study was to investigate the consistency of the L∗a∗b∗ color parameters of a sample of a commonly used shade guide. The color parameters of a total of 100 VITAPAN Classical Vacuum shade guide (VITA Zahnfabrik, Bad Säckingen, Germany(were measured using a X-Rite ColorEye 7000A Spectrophotometer (Grand Rapids, Michigan, USA). Each shade guide consists of 16 tabs with different designations. Each shade tab was measured five times and the average values were calculated. The ΔE between the average L∗a∗b∗ value for each shade tab and the average of the 100 shade tabs of the same designation was calculated. Using the Student t-test analysis, no significant differences were found among the measured sample. There is a high consistency level in terms of color parameters of the measured VITAPAN Classical Vacuum shade guide sample tested.

Intraoperative positioning of the hindfoot with the hindfoot alignment guide: a pilot study.

Science.gov (United States)

Frigg, Arno; Jud, Lukas; Valderrabano, Victor

2014-01-01

In a previous study, intraoperative positioning of the hindfoot by visual means resulted in the wrong varus/valgus position by 8 degrees and a relatively large standard deviation of 8 degrees. Thus, new intraoperative means are needed to improve the precision of hindfoot surgery. We therefore sought a hindfoot alignment guide that would be as simple as the alignment guides used in total knee arthroplasty. A novel hindfoot alignment guide (HA guide) has been developed that projects the mechanical axis from the tibia down to the heel. The HA guide enables the positioning of the hindfoot in the desired varus/valgus position and in plantigrade position in the lateral plane. The HA guide was used intraoperatively from May through November 2011 in 11 complex patients with simultaneous correction of the supramalleolar, tibiotalar, and inframalleolar alignment. Pre- and postoperative Saltzman views were taken and the position was measured. The HA guide significantly improved the intraoperative positioning compared with visual means: The accuracy with the HA guide was 4.5 ± 5.1 degrees (mean ± standard deviation) and without the HA guide 9.4 ± 5.5 degrees (P guide (2 avoided osteotomies, 5 additional osteotomies). The HA guide helped to position the hindfoot intraoperatively with greater precision than visual means. The HA guide was especially useful for multilevel corrections in which the need for and the amount of a simultaneous osteotomy had to be evaluated intraoperatively. Level IV, case series.

A Study on the Guided Wave Mode Conversion using Self-calibrating Technique

International Nuclear Information System (INIS)

Park, Jung Chul; Cho, Youn Ho

2000-01-01

The guided wave mode conversion phenomena were investigated for the NDE of a plate-like structure with thickness variation. The ratios of reflection and transmission (R/T) were measured via the self-calibrating procedure which allows us to obtain experimental guided wave data in a more reliable way regardless of the coupling uncertainty between transducer and specimen. The results on R/T could be used to determine the thickness reduction of the structure. It was shown that not only the incident modes but also the converted ones need to be considered in the self-calibrating guided wave inspection to extract a reasonable correlation between experimental data and the thickness variation. Through this study, the potential of guided wave inspection as a quantitative NDE technique was explored based on the combined concept of self-calibration and multi-mode conversion in guided wave scattering problems

Image guided versus palpation guided core needle biopsy of palpable breast masses: a prospective study

Directory of Open Access Journals (Sweden)

Smriti Hari

2016-01-01

Interpretation & conclusions: Our results showed that in palpable breast masses, image guided biopsy was superior to palpation guided biopsy in terms of sensitivity, false negative rate and repeat biopsy rates.

Guided Wave Propagation Study on Laminated Composites by Frequency-Wavenumber Technique

Science.gov (United States)

Tian, Zhenhua; Yu, Lingyu; Leckey, Cara A. C.

2014-01-01

Toward the goal of delamination detection and quantification in laminated composites, this paper examines guided wave propagation and wave interaction with delamination damage in laminated carbon fiber reinforced polymer (CFRP) composites using frequency-wavenumber (f-kappa) analysis. Three-dimensional elastodynamic finite integration technique (EFIT) is used to acquire simulated time-space wavefields for a CFRP composite. The time-space wavefields show trapped waves in the delamination region. To unveil the wave propagation physics, the time-space wavefields are further analyzed by using two-dimensional (2D) Fourier transforms (FT). In the analysis results, new f-k components are observed when the incident guided waves interact with the delamination damage. These new f-kappa components in the simulations are experimentally verified through data obtained from scanning laser Doppler vibrometer (SLDV) tests. By filtering the new f-kappa components, delamination damage is detected and quantified.

Recommendations guide for the correct prescription's tests of diagnosis by image

International Nuclear Information System (INIS)

2007-01-01

The purpose of this guide is to protect the health of the population against the dangers of ionizing radiation. The unjustified studies involving exposure to radiation unnecessarily increases the cancer risk in the exposed population. Medical irradiations are the most important contribution to human exposure to ionizing radiation from artificial character. Since statistics indicate a growing trend in the number of practices as well as the number of facilities, the quality of those practices, its justification and its optimization are today a relevant topic to scientific societies and regulatory agencies. Since the adoption of the directive 97/43/EURATOM, and the realization of the Conference of Malaga most European countries have implemented action plans for radiation protection of patients, including the search for consensus on the optimization dose criteria and justification for the indication of the examinations. An example is the PR/118 guide for diagnosis studies requests. In this framework, two Conferences on Radiation Protection of Patient were held in our country in which 'Working Groups' were organized on the following topics: Radiodiagnosis, Radiotherapy, Nuclear Medicine and Radioprotection of the Pregnant Woman. Systematic actions that received strong institutional support of the Argentine Society of Radiology began and ended with the elaboration of a 'Program for Radiological Protection Patient' which is being implemented [es

Recognizing and Addressing Limited PHarmaceutical literacy: Development of the RALPH interview guide.

Science.gov (United States)

Vervloet, Marcia; van Dijk, Liset; Rademakers, Jany J D J M; Bouvy, Marcel L; De Smet, Peter A G M; Philbert, Daphne; Koster, Ellen S

2018-04-30

In the context of medication use, pharmaceutical literacy skills are crucial for appropriate and safe use of medication. Recognition of patients with inadequate pharmaceutical literacy in daily pharmacy practice is difficult. No instrument is yet available to support pharmacists herein. The aim of this study was therefore to develop an interview guide for pharmacists to Recognize and Address Limited PHarmaceutical literacy (RALPH). The RALPH interview guide was constructed in three phases: (1) development including a literature search, expert group discussion, and feasibility test with 15 patients; (2) pilot-test with 421 patients throughout 30 community pharmacies, and (3) final test with 508 patients to optimize the interview guide. The development phase resulted in a first interview guide comprising 15 questions: seven in the functional domain (understanding instructions), four in the communicative domain (finding and understanding medication information) and four in the critical domain (critically analyzing medication information). This version was pilot-tested in 30 pharmacies, with 147 patients during medication reviews and another 274 patients were interviewed while waiting to collect their medication. This test phase led to removal of questions that proved difficult to interpret and to rephrasing some questions. The second version including 11 questions was tested by 109 pharmacists trainees with 508 patients, resulting in the final RALPH interview guide comprising 10 questions, all directly linked to the patient's own medication: three in the functional, three in the communicative and four in the critical domain. Besides instructions on how to use the interview guide, recommendations are provided for pharmacists on how to support patients with limited pharmaceutical literacy skills. The practice-based RALPH interview guide supports pharmacists in recognizing patients with limited pharmaceutical literacy. With this insight, pharmacists can tailor their

A study on laser-based ultrasonic technique by the use of guided wave tomographic imaging

Energy Technology Data Exchange (ETDEWEB)

Park, Junpil, E-mail: jpp@pusan.ac.kr; Lim, Juyoung, E-mail: jpp@pusan.ac.kr [Graduate school, School of Mechanical Engineering, Pusan National University (Korea, Republic of); Cho, Younho [School of Mechanical Engineering, Pusan National University (Korea, Republic of); Krishnaswamy, Sridhar [Center for Quality Engineering and Failure Prevention, Northwestern University, Evanston, IL (United States)

2015-03-31

Guided wave tests are impractical for investigating specimens with limited accessibility and coarse surfaces or geometrically complicated features. A non-contact setup with a laser ultrasonic transmitter and receiver is the classic attractive for guided wave inspection. The present work was done to develop a non-contact guided-wave tomography technique by laser ultrasonic technique in a plate-like structure. A method for Lam wave generation and detection in an aluminum plate with a pulse laser ultrasonic transmitter and a Michelson interferometer receiver has been developed. In the images obtained by laser scanning, the defect shape and area showed good agreement with the actual defect. The proposed approach can be used as a non-contact-based online inspection and monitoring technique.

Looking at Life. Study Guide. Unit A2. ZIM-SCI, Zimbabwe Secondary School Science Project.

Science.gov (United States)

Hosking, Bunty

The Zimbabwe Secondary School Science Project (ZIM-SCI) developed student study guides, corresponding teaching guides, and science kits for a low-cost science course which could be taught during the first 2 years of secondary school without the aid of qualified teachers and conventional laboratories. This ZIM-SCI study guide presents activities…

Study of influence of transport performance of the neutron guide

International Nuclear Information System (INIS)

Li Xinxi; Wang Yan; Huang Chaoqiang; Chen Bo; Chen Liang

2009-01-01

For the sake of improving the performance of the neutron scattering instrument, usually we need use the neutron guide, it's very important to select the right type and optimizing of neutron guide. The papers calculate the focus neutron guide and the single channel neutron guide by numeric method. The results shows that the choice of neutron guide should consult the resolution requirement of neutron scattering instrument, and the length of the neutron guide should be optimized. The calculation results can be the theoretical reference for the design of neutron scattering instrument. (authors)

Performance study of protective clothing against hot water splashes: from bench scale test to instrumented manikin test.

Science.gov (United States)

Lu, Yehu; Song, Guowen; Wang, Faming

2015-03-01

Hot liquid hazards existing in work environments are shown to be a considerable risk for industrial workers. In this study, the predicted protection from fabric was assessed by a modified hot liquid splash tester. In these tests, conditions with and without an air spacer were applied. The protective performance of a garment exposed to hot water spray was investigated by a spray manikin evaluation system. Three-dimensional body scanning technique was used to characterize the air gap size between the protective clothing and the manikin skin. The relationship between bench scale test and manikin test was discussed and the regression model was established to predict the overall percentage of skin burn while wearing protective clothing. The results demonstrated strong correlations between bench scale test and manikin test. Based on these studies, the overall performance of protective clothing against hot water spray can be estimated on the basis of the results of the bench scale hot water splashes test and the information of air gap size entrapped in clothing. The findings provide effective guides for the design and material selection while developing high performance protective clothing. Published by Oxford University Press on behalf of the British Occupational Hygiene Society 2014.

Opening the Blood-Brain Barrier with MR Imaging-guided Focused Ultrasound: Preclinical Testing on a Trans-Human Skull Porcine Model.

Science.gov (United States)

Huang, Yuexi; Alkins, Ryan; Schwartz, Michael L; Hynynen, Kullervo

2017-01-01

Purpose To develop and test a protocol in preparation for a clinical trial on opening the blood-brain barrier (BBB) with magnetic resonance (MR) imaging-guided focused ultrasound for the delivery of chemotherapy drugs to brain tumors. Materials and Methods The procedures were approved by the institutional animal care committee. A trans-human skull porcine model was designed for the preclinical testing. Wide craniotomies were applied in 11 pigs (weight, approximately 15 kg). A partial human skull was positioned over the animal's brain. A modified clinical MR imaging-guided focused ultrasound brain system was used with a 3.0-T MR unit. The ultrasound beam was steered during sonications over a 3 × 3 grid at 3-mm spacing. Acoustic power levels of 3-20 W were tested. Bolus injections of microbubbles at 4 μL/kg were tested for each sonication. Levels of BBB opening, hemorrhage, and cavitation signal were measured with MR imaging, histologic examination, and cavitation receivers, respectively. A cavitation safety algorithm was developed on the basis of logistic regression of the measurements and tested to minimize the risk of hemorrhage. Results BBB openings of approximately 1 cm 3 in volume were visualized with gadolinium-enhanced MR imaging after sonication at an acoustic power of approximately 5 W. Gross examination of histologic specimens helped confirm Evans blue (bound to macromolecule albumin) extravasation, and hematoxylin-eosin staining helped detect only scattered extravasation of red blood cells. In cases where cavitation signals were higher than thresholds, sonications were terminated immediately without causing hemorrhage. Conclusion With a trans-human skull porcine model, this study demonstrated BBB opening with a 230-kHz system in preparation for a clinical trial. © RSNA, 2016 Online supplemental material is available for this article.

Accuracy of Implants Placed with Surgical Guides: Thermoplastic Versus 3D Printed.

Science.gov (United States)

Bell, Caitlyn K; Sahl, Erik F; Kim, Yoon Jeong; Rice, Dwight D

This study was conducted to evaluate the accuracy of implants placed using two different guided implant surgery materials: thermoplastic versus three-dimensionally (3D) printed. A cone beam computed tomography (CBCT) scan previously obtained and selected for single-tooth implant replacement was converted into a Digital Imaging and Communications in Medicine (DICOM) file. All models were planned and exported for printing using BlueSkyBio Plan Software with the DICOM files. A total of 20 3D-printed mandibular quadrant jaws replicating the CBCT were printed by Right Choice Milling, as was the control model to accept the control implant. Previously, 10 thermoplastic and 10 3D-printed surgical guides had been made by the same lab technician at Right Choice Milling. One Nobel Biocare implant with a trilobe connection was placed per guide and replica jaw model pair. Implants were placed using the thermoplastic and 3D-printed surgical guides, representing the two test groups, following the Nobel Biocare guided surgical protocol. A total of 21 CBCT scans were then taken, one for the control implant and one for each test implant. The CBCT volume was converted to a DICOM file and transferred to Invivo5 software version 5.4 (Anatomage). The DICOM file of each test implant was superimposed over the DICOM file of the control. The deviation of the head of the implant, the deviation of the apex of the implant, and the angle of deviation were evaluated from measurements on the superimposition of the control and test implants. Mann-Whitney U test was used to test the null hypotheses at α = .05 and a confidence interval of 95%. Descriptive statistics were used for the average ± standard deviation. The implants placed with the thermoplastic surgical guides showed an average of 3.40 degrees of angular deviation compared to 2.36 degrees for implants placed with the 3D-printed surgical guides (P = .143). The implants placed with the thermoplastic surgical guides showed an average of 1

Development of an ultrasound-guided technique for retrobulbar nerve block in dromedary camels: a cadaveric study.

Science.gov (United States)

Badawy, Adel M; Eshra, Eman A

2018-03-01

Description of an ultrasound (US)-guided technique for retrobulbar nerve blockade in dromedary (Camelus dromedarius) cadavers. Prospective experimental cadaveric study that was carried out in three phases: phase I: anatomical dissection and development of US-guided technique; phase II: methylene blue (MB) injection; phase III: contrast medium (CM), US-guided injections with computed tomography (CT) control. A total of 36 orbits from 18 heads were obtained from 18 dromedary cadavers. Phase I: anatomical dissections were carried out bilaterally, using two heads to determine needle site placement. Phase II: a US-guided, lateral, in-plane approach using one of three volumes of MB (3, 6, or 9 mL) was evaluated in six heads (four orbits per volume tested) to establish the ideal injection volume. Injections of MB that strongly stained all retrobulbar nerves were considered successful, whereas insufficient MB volumes resulted in weak or no nerve staining. Phase III: US-guided retrobulbar injection with CM was carried out using 20 orbits. Computed tomography was performed after each injection trial to determine the accuracy of needle placement and CM dispersal. An injection was judged to be successful when the CT images revealed that the needle was located within the retractor bulbi muscle cone and the CM reached the target nerves at the orbitorotundum and the optic foramina. Only injection of 9 mL of MB stained the target nerves sufficiently, whereas there was no or only weak staining with 3 and 6 mL, respectively. Therefore, 9 mL of CM was used for the US-guided injections in phase III. Subsequent CT scans revealed satisfying CM distribution within the ocular muscle cone in 18 of 20 cases (90% success rate). US-guided retrobulbar injection in dromedary cadavers is feasible. Further research is required to assess its practicality and usefulness in vivo. Copyright © 2017 Association of Veterinary Anaesthetists and American College of Veterinary Anesthesia and

Standard guide for measuring the wear volumes of piston ring segments run against flat coupons in reciprocating wear tests

CERN Document Server

American Society for Testing and Materials. Philadelphia

2011-01-01

1.1 This guide covers and describes a profiling method for use accurately measuring the wear loss of compound-curved (crowned) piston ring specimens that run against flat counterfaces. It does not assume that the wear scars are ideally flat, as do some alternative measurement methods. Laboratory-scale wear tests have been used to evaluate the wear of materials, coatings, and surface treatments that are candidates for piston rings and cylinder liners in diesel engines or spark ignition engines. Various loads, temperatures, speeds, lubricants, and durations are used for such tests, but some of them use a curved piston ring segment as one sliding partner and a flat or curved specimen (simulating the cylinder liner) as its counterface. The goal of this guide is to provide more accurate wear measurements than alternative approaches involving weight loss or simply measuring the length and width of the wear marks. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its ...

Novel Study Guides for Biochemistry Meaningful Learning in Biology: a Design-Based Research

Directory of Open Access Journals (Sweden)

Costa, C ; Galembeck, E. Costa, C ; Galembeck, E.

2017-07-01

Full Text Available One of the difficulties for biochemistry learning is the persistence of traditional teaching methods, based on transmission and memorization of abstract and detailed information, usually in a decontextualized way. Such scenario results in surface learning and content reproduction. In order to address these problems, three interventions in a discipline (Metabolism for Biology majors were applied, in the form of innovative teaching tools (study guides. OBJECTIVES: The main goal is to evaluate the impact of these interventions on interest, motivation, and learning of the metabolic pathways. MATERIALS AND METHODS: We describe the development, application, and evaluation of two study guides – one created from a problem used as a contextual connection for glycogen metabolism study and another embedding an integrative view based on glutamate metabolism. Both materials were guided by broad themes like evolution, metabolic adaptation, and comparative biochemistry. The development of the study guides combined submicroscopic (molecular and macroscopic (body, environment levels, aiming to motivate reading and discussion. A design-based research with cycles of application and assessment was carried out, by means of classroom observation, grade analysis in written exams, and students’ interviews. RESULTS AND DISCUSSION: In general, based on in-class student feedback to professors and to the researcher in the interviews, the study guides arouse curiosity and fostered peer discussion. Final average grades indicate a good global performance in all proposed activities. Whole data from study guides’ application in classroom evidenced their impact on interest, motivation, and learning. The strategy of developing problem or integrative situation linking molecular (micro and contextual (macro levels were helpful to foster critical thinking and to value topics of scientific literacy. CONCLUSIONS: Analysis and interpretation of the results point to benefits for

Experimental and numerical study of guided wave propagation in a thin metamaterial plate

International Nuclear Information System (INIS)

Zhu, R.; Huang, G.L.; Huang, H.H.; Sun, C.T.

2011-01-01

In this Letter, both in-plane and out-of-plane guided waves in a thin plate with local resonators are studied numerically and experimentally. Through the numerical simulation, a new metamaterial plate design is achieved for a low-frequency bandgap in both in-plane and out-of-plane guided waves. Experiments were conducted to validate the numerical design. In the experiment, piezoelectric transducers were used to generate and receive guided wave signals. The results show that the numerical predictions are in very good agreement with the experimental measurements. Specifically, the connection between the local resonance in the thin plate and its wave attenuation mechanism was discussed. -- Highlights: → Both in-plane and out-of-plane guided waves in a thin plate with local resonators are studied numerically and experimentally. → A new metamaterial plate design is achieved for a low-frequency bandgap in both in-plane and out-of-plane guided waves. → Experiments were conducted to validate the numerical design. → The connection between the local resonance in the thin plate and its wave attenuation mechanism was investigated.

IEEE Std 101-1972: IEEE guide for the statistical analysis of thermal life test data

International Nuclear Information System (INIS)

Anon.

1992-01-01

Procedures for estimating the thermal life of electrical insulation systems and materials call for life tests at several temperatures, usually well above the expected normal operating temperature. By the selection of high temperatures for the tests, life of the insulation samples will be terminated, according to some selected failure criterion or criteria, within relatively short times -- typically one week to one year. The result of these thermally accelerated life tests will be a set of data of life values for a corresponding set of temperatures. Usually the data consist of a set of life values for each of two to four (occasionally more) test temperatures, 10 C to 25 C apart. The objective then is to establish from these data the mean life vales at each temperature and the functional dependence of life on temperature, as well as the statistical consistency and the confidence to be attributed to the mean life values and the functional life temperature dependence. The purpose of this guide is to assist in this objective and to give guidance for comparing the results of tests on different materials and of different tests on the same materials

Risk evaluations of aging: Procedures guide for an age-dependent PSA with emphasis on prioritization and sensitivity studies

International Nuclear Information System (INIS)

Vesely, W.E.

1991-01-01

Based on the previous work which has been performed in the project, a procedures guide is being developed for carrying out an age-dependent probabilistic safety assessment (PSA) for evaluating the core damage frequency with aging effects explicitly treated. A PSA is basically a Level 1 Probabilistic Risk Assessment (PRA). The emphasis of the guide is on prioritization and sensitivity studies. Focus is also on active components although consideration of aging effects in passive components is also treated. The guide is intended to become a NUREG/CR and is the first of three volumes which are being developed. The following topics with demonstrations and applications are described in the presentation: (1) the age-dependent PSA versus the standard PSA; (2) component reliability models used in an age-dependent PSA; (3) approaches for transforming a PSA into an age-dependent PSA; (4) application of an age-dependent PSA; (5) using a PSA to evaluate the risk effects from aging passive components; (6) evaluation of the risk importance of passive components; (7) prioritizations of aging contributors; (8) evaluations of test and maintenance effectiveness; and (9) sensitivity studies and uncertainty analyses of aging effects

Parametric study of guided waves dispersion curves for composite plates

Science.gov (United States)

Predoi, Mihai Valentin; Petre, Cristian Cǎtǎlin; Kettani, Mounsif Ech Cherif El; Leduc, Damien

2018-02-01

Nondestructive testing of composite panels benefit from the relatively long range propagation of guided waves in sandwich structures. The guided waves are sensitive to delamination, air bubbles inclusions and cracks and can thus bring information about hidden defects in the composite panel. The preliminary data in all such inspections is represented by the dispersion curves, representing the dependency of the phase/group velocity on the frequency for the propagating modes. In fact, all modes are more or less attenuated, so it is even more important to compute the dispersion curves, which provide also the modal attenuation as function of frequency. Another important aspect is the sensitivity of the dispersion curves on each of the elastic constant of the composite, which are orthotropic in most cases. All these aspects are investigated in the present work, based on our specially developed finite element numerical model implemented in Comsol, which has several advantages over existing methods. The dispersion curves and modal displacements are computed for an example of composite plate. Comparison with literature data validates the accuracy of our results.

Evaluation of the setup margins for cone beam computed tomography–guided cranial radiosurgery: A phantom study

Energy Technology Data Exchange (ETDEWEB)

Calvo Ortega, Juan Francisco, E-mail: jfcdrr@yahoo.es [Department of Radiation Oncology, Hospital Quirón, Barcelona (Spain); Wunderink, Wouter [Department of Radiotherapy, Erasmus MC Cancer Institute, University Medical Center Rotterdam, Rotterdam (Netherlands); Delgado, David; Moragues, Sandra; Pozo, Miquel; Casals, Joan [Department of Radiation Oncology, Hospital Quirón, Barcelona (Spain)

2016-10-01

The aim of this study is to evaluate the setup margins from the clinical target volume (CTV) to planning target volume (PTV) for cranial stereotactic radiosurgery (SRS) treatments guided by cone beam computed tomography (CBCT). We designed an end-to-end (E2E) test using a skull phantom with an embedded 6mm tungsten ball (target). A noncoplanar plan was computed (E2E plan) to irradiate the target. The CBCT-guided positioning of the skull phantom on the linac was performed. Megavoltage portal images were acquired after 15 independent deliveries of the E2E plan. The displacement 2-dimensional (2D) vector between the centers of the square field and the ball target on each portal image was used to quantify the isocenter accuracy. Geometrical margins on each patient's direction (left-right or LR, anterior-posterior or AP, superior-inferior or SI) were calculated. Dosimetric validation of the margins was performed in 5 real SRS cases: 3-dimesional (3D) isocenter deviations were mimicked, and changes in CTV dose coverage and organs-at-risk (OARs) dosage were analyzed. The CTV-PTV margins of 1.1 mm in LR direction, and 0.7 mm in AP and SI directions were derived from the E2E tests. The dosimetric analysis revealed that a 1-mm uniform margin was sufficient to ensure the CTV dose coverage, without compromising the OAR dose tolerances. The effect of isocenter uncertainty has been estimated to be 1 mm in our CBCT-guided SRS approach.

A study on the optimization of optical guide of gamma camera detector

International Nuclear Information System (INIS)

Chung, Yong Hyun; Cho, Gyu Seong; Kim, Ho Kyung; Lee, Wan No; Kim, Young Soo

2000-01-01

An optical guide, which is a light guide located between NaI(Tl) scintillation-crystal and array of photo-multiplier tubes (PMTs) in the gamma camera detector system, is an essential component to deliver the spatial information recorded in scintillator to the PMTs. Without the optical guide, the spatial information within the range of a single PMT could not be obtained. For the design of the optimal optical guide, it is necessary to characterize its properties, especially sensitivity and spatial resolution of detector. In this study, the thickness and the refractive index of optical guide, which affect not only on the sensitivity but also on the spatial resolution of gamma-camera detector, were investigated by using Monte Carlo simulation. A 12'x12'x3/8' NaI(Tl) and 23 PMTs with each 5' diameter were considered as a gamma-camera detector components. Interactions of optical photons in the scintillator and the optical guide were simulated using a commercial code DETECT97, and the spatial resolution, mainly interfered by the intrinsic inward distortion within the PMT, was investigated using our own ANGER program, which was developed to calculate positions of incident photons in the gamma camera. From the simulation results, it was found that an optical guide with 1.6 of refractive index and 10 mm of thickness give maximum sensitivity and minimum spatial distortion, respectively

Radiation dose reduction in CT-guided sacroiliac joint injections to levels of pulsed fluoroscopy: a comparative study with technical considerations

Directory of Open Access Journals (Sweden)

Artner J

2012-08-01

Full Text Available Juraj Artner, Balkan Cakir, Heiko Reichel, Friederike LattigDepartment of Orthopaedic Surgery, University of Ulm, RKU, GermanyBackground: The sacroiliac (SI joint is frequently the primary source of low back pain. Over the past decades, a number of different SI injection techniques have been used in its diagnosis and therapy. Despite the concerns regarding exposure to radiation, image-guided injection techniques are the preferred method to achieve safe and precise intra-articular needle placement. The following study presents a comparison of radiation doses, calculated for fluoroscopy and CT-guided SI joint injections in standard and low-dose protocol and presents the technical possibility of CT-guidance with maximum radiation dose reduction to levels of fluoroscopic-guidance for a precise intra-articular injection technique.Objective: To evaluate the possibility of dose reduction in CT-guided sacroiliac joint injections to pulsed-fluoroscopy-guidance levels and to compare the doses of pulsed-fluoroscopy-, CT-guidance, and low-dose CT-guidance for intra-articular SI joint injections.Study design: Comparative study with technical considerations.Methods: A total of 30 CT-guided intra-articular SI joint injections were performed in January 2012 in a developed low-dose mode and the radiation doses were calculated. They were compared to 30 pulsed-fluoroscopy-guided SI joint injections, which were performed in the month before, and to five injections, performed in standard CT-guided biopsy mode for spinal interventions. The statistical significance was calculated with the SPSS software using the Mann–Whitney U-Test. Technical details and anatomical considerations were provided.Results: A significant dose reduction of average 94.01% was achieved using the low-dose protocol for CT-guided SI joint injections. The radiation dose could be approximated to pulsed-fluoroscopy-guidance levels.Conclusion: Radiation dose of CT-guided SI joint injections can be

A Guide to Curriculum Planning in Social Studies Education.

Science.gov (United States)

Hartoonian, H. Michael

Designed to provide social studies educators with specific information for the development of local school district K-12 curriculum, this guide is organized into eight sections. Following an introduction, section 1 provides a rationale, goals, and major themes for the social studies and social sciences. Section 2 presents a scope and sequence…

Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases

CERN Document Server

American Society for Testing and Materials. Philadelphia

2000-01-01

1.1 This guide establishes essential and desirable data elements for fiber-reinforced composite materials for two purposes: to establish the material identification component of data-reporting requirements for test reporting and to provide information for the design of material property databases. 1.1.1 This guide is the first part of a two-part modular approach. The first part serves to identify the material and the second part serves to describe testing procedures and variables and to record results. 1.1.2 For mechanical testing, the related document is Guide E 1434. The interaction of this guide with Guide E 1434 is emphasized by the common numbering of data elements. Data Elements A1 through G13 are included in this guide, and numbering of data elements in Guide E 1434 begins with H1 for the next data element block. This guide is most commonly used in combination with a guide for reporting the test procedures and results such as Guide E 1434. 1.2 These guidelines are specific to fiber-reinforced polyme...

CompTIA Linux+ study guide exam LX0-103 and exam LX0-104

CERN Document Server

Bresnahan, Christine

2015-01-01

CompTIA Authorized Linux+ prepCompTIA Linux+ Study Guide is your comprehensive study guide for the Linux+ Powered by LPI certification exams. With complete coverage of 100% of the objectives on both exam LX0-103 and exam LX0-104, this study guide provides clear, concise information on all aspects of Linux administration, with a focus on the latest version of the exam. You'll gain the insight of examples drawn from real-world scenarios, with detailed guidance and authoritative coverage of key topics, including GNU and Unix commands, system operation, system administration, system services, secu

Standard guide for in-plant performance evaluation of automatic pedestrian SNM monitors

CERN Document Server

American Society for Testing and Materials. Philadelphia

1997-01-01

1.1 This guide is affiliated with Guide C1112 on special nuclear material (SNM) monitors, Guide C1169 on laboratory performance evaluation, and Guide C1189 on calibrating pedestrian SNM monitors. This guide to in-plant performance evaluation is a comparatively rapid way to verify whether a pedestrian SNM monitor performs as expected for detecting SNM or SNM-like test sources. 1.1.1 In-plant performance evaluation should not be confused with the simple daily functional test recommended in Guide C1112. In-plant performance evaluation takes place less often than daily tests, usually at intervals ranging from weekly to once every three months. In-plant evaluations are also more extensive than daily tests and may examine both a monitor's nuisance alarm record and its detection sensitivity for a particular SNM or alternative test source. 1.1.2 In-plant performance evaluation also should not be confused with laboratory performance evaluation. In-plant evaluation is comparatively rapid, takes place in the monitor...

Study of guided modes in three-dimensional composites

Science.gov (United States)

Baste, S.; Gerard, A.

The propagation of elastic waves in a three-dimensional carbon-carbon composite is modeled with a mixed variational method, using the Bloch or Floquet theories and the Hellinger-Reissner function for two independent fields. The model of the equivalent homogeneous material only exists below a cut-off frequency of about 600 kHz. The existence below the cut-off frequency of two guided waves can account for the presence of a slow guided wave on either side of the cut-off frequency. Optical modes are generated at low frequencies, and can attain high velocites (rapid guided modes of 15,000 m/sec).

Predicting factors for conversion from fluoroscopy guided Percutaneous transthoracic needle biopsy to cone-beam CT guided Percutaneous transthoracic needle biopsy

International Nuclear Information System (INIS)

Lee, Kang Ji; Han, Young Min; Jin, Gong Yong; Song, Ji Soo

2015-01-01

To evaluate the predicting factors for conversion from fluoroscopy guided percutaneous transthoracic needle biopsy (PTNB) to cone-beam CT guided PTNB. From January 2011 to December 2012, we retrospectively identified 38 patients who underwent cone-beam CT guided PTNB with solid pulmonary lesions, and 76 patients who underwent fluoroscopy guided PTNB were matched to the patients who underwent cone-beam CT guided PTNB for age, sex, and lesion location. We evaluated predicting factors such as, long-axis diameter, short-axis diameter, anterior-posterior diameter, and CT attenuation value of the solid pulmonary lesion affecting conversion from fluoroscopy guided PTNB to cone-beam CT guided PTNB. Pearson χ 2 test, Fisher exact test, and independent t test were used in statistical analyses; in addition, we also used receiver operating characteristics curve to find the proper cut-off values affecting the conversion to cone-beam CT guided PTNB. Short-axis, long-axis, anterior-posterior diameter and CT attenuation value of the solid pulmonary lesion in patients who underwent fluoroscopy guided PTNB were 2.70 ± 1.57 cm, 3.40 ± 1.92 cm, 3.06 ± 1.81 cm, and 35.67 ± 15.70 Hounsfield unit (HU), respectively. Short-axis, long-axis, anterior-posterior diameter and CT attenuation value of the solid pulmonary lesion in patients who underwent cone-beam CT guided PTNB were 1.60 ± 1.30 cm, 2.20 ± 1.45 cm, 1.91 ± 1.99 cm, and 18.32 ± 23.11 HU, respectively. Short-axis, long-axis, anterior-posterior diameter, and CT attenuation value showed a significantly different mean value between the 2 groups (p = 0.001, p < 0.001, p = 0.003, p < 0.001, respectively). Odd ratios of CT attenuation value and short-axis diameter of the solid pulmonary lesion were 0.952 and 0.618, respectively. Proper cut-off values affecting the conversion to cone-beam CT guided PTNB were 1.65 cm (sensitivity 68.4%, specificity 71.1%) in short-axis diameter and 29.50 HU (sensitivity 65.8%, specificity 65.8%) in

Effectiveness and cost-effectiveness of serum B-type natriuretic peptide testing and monitoring in patients with heart failure in primary and secondary care: an evidence synthesis, cohort study and cost-effectiveness model.

Science.gov (United States)

Pufulete, Maria; Maishman, Rachel; Dabner, Lucy; Mohiuddin, Syed; Hollingworth, William; Rogers, Chris A; Higgins, Julian; Dayer, Mark; Macleod, John; Purdy, Sarah; McDonagh, Theresa; Nightingale, Angus; Williams, Rachael; Reeves, Barnaby C

2017-08-01

Heart failure (HF) affects around 500,000 people in the UK. HF medications are frequently underprescribed and B-type natriuretic peptide (BNP)-guided therapy may help to optimise treatment. To evaluate the clinical effectiveness and cost-effectiveness of BNP-guided therapy compared with symptom-guided therapy in HF patients. Systematic review, cohort study and cost-effectiveness model. A literature review and usual care in the NHS. (a) HF patients in randomised controlled trials (RCTs) of BNP-guided therapy; and (b) patients having usual care for HF in the NHS. Systematic review : BNP-guided therapy or symptom-guided therapy in primary or secondary care. Cohort study : BNP monitored (≥ 6 months' follow-up and three or more BNP tests and two or more tests per year), BNP tested (≥ 1 tests but not BNP monitored) or never tested. Cost-effectiveness model : BNP-guided therapy in specialist clinics. Mortality, hospital admission (all cause and HF related) and adverse events; and quality-adjusted life-years (QALYs) for the cost-effectiveness model. Systematic review : Individual participant or aggregate data from eligible RCTs. Cohort study : The Clinical Practice Research Datalink, Hospital Episode Statistics and National Heart Failure Audit (NHFA). A systematic literature search (five databases, trial registries, grey literature and reference lists of publications) for published and unpublished RCTs. Five RCTs contributed individual participant data (IPD) and eight RCTs contributed aggregate data (1536 participants were randomised to BNP-guided therapy and 1538 participants were randomised to symptom-guided therapy). For all-cause mortality, the hazard ratio (HR) for BNP-guided therapy was 0.87 [95% confidence interval (CI) 0.73 to 1.04]. Patients who were aged Chris A Rogers' and Maria Pufulete's time contributing to the study. Syed Mohiuddin's time is supported by the NIHR Collaboration for Leadership in Applied Health Research and Care West at University

Practitioner-informed improvements to early childhood intervention performance checklists and practice guides

Directory of Open Access Journals (Sweden)

Carl J. Dunst

2017-08-01

Full Text Available Results from four early childhood practitioner field tests of performance checklists and early intervention practice guides are reported. Findings from the first field test were used to make changes and improvements in the checklists and practice guides evaluated in the second and third field tests, and findings from the latter two field tests were used to improve the checklist and practice guide evaluated in the fourth field test. Results indicated that changes made in response to practitioners’ suggestions and feedback were associated with (1 progressive increases in the practitioners’ social validity judgments of the checklists, practice guides, and checklist-practice guide correspondence, and (2 progressive decreases in the number of practitioner suggestions and feedback for improving the early intervention materials. The field-test research demonstrates the importance of practitioner input, suggestions, and feedback for improving the usefulness of early childhood intervention practices.

Directional nonlinear guided wave mixing: Case study of counter-propagating shear horizontal waves

Science.gov (United States)

Hasanian, Mostafa; Lissenden, Cliff J.

2018-04-01

While much nonlinear ultrasonics research has been conducted on higher harmonic generation, wave mixing provides the potential for sensitive measurements of incipient damage unencumbered by instrumentation nonlinearity. Studies of nonlinear ultrasonic wave mixing, both collinear and noncollinear, for bulk waves have shown the robust capability of wave mixing for early damage detection. One merit of bulk wave mixing lies in their non-dispersive nature, but guided waves enable inspection of otherwise inaccessible material and a variety of mixing options. Co-directional guided wave mixing was studied previously, but arbitrary direction guided wave mixing has not been addressed until recently. Wave vector analysis is applied to study variable mixing angles to find wave mode triplets (two primary waves and a secondary wave) resulting in the phase matching condition. As a case study, counter-propagating Shear Horizontal (SH) guided wave mixing is analyzed. SH wave interactions generate a secondary Lamb wave mode that is readily receivable. Reception of the secondary Lamb wave mode is compared for an angle beam transducer, an air coupled transducer, and a laser Doppler vibrometer (LDV). Results from the angle beam and air coupled transducers are quite consistent, while the LDV measurement is plagued by variability issues.

Human factors guides

International Nuclear Information System (INIS)

Penington, J.

1995-10-01

This document presents human factors guides, which have been developed in order to provide licensees of the AECB with advice as to how to address human factors issues within the design and assessment process. This documents presents the results of a three part study undertaken to develop three guides which are enclosed in this document as Parts B, C and D. As part of the study human factors standards, guidelines, handbooks and other texts were researched, to define those which would be most useful to the users of the guides and for the production of the guides themselves. Detailed specifications were then produced to outline the proposed contents and format of the three guides. (author). 100 refs., 3 tabs., 11 figs

Human factors guides

Energy Technology Data Exchange (ETDEWEB)

Penington, J [PHF Services Inc., (Canada)

1995-10-01

This document presents human factors guides, which have been developed in order to provide licensees of the AECB with advice as to how to address human factors issues within the design and assessment process. This documents presents the results of a three part study undertaken to develop three guides which are enclosed in this document as Parts B, C and D. As part of the study human factors standards, guidelines, handbooks and other texts were researched, to define those which would be most useful to the users of the guides and for the production of the guides themselves. Detailed specifications were then produced to outline the proposed contents and format of the three guides. (author). 100 refs., 3 tabs., 11 figs.

A Guide to Studying Human Hair Follicle Cycling In Vivo.

Science.gov (United States)

Oh, Ji Won; Kloepper, Jennifer; Langan, Ewan A; Kim, Yongsoo; Yeo, Joongyeub; Kim, Min Ji; Hsi, Tsai-Ching; Rose, Christian; Yoon, Ghil Suk; Lee, Seok-Jong; Seykora, John; Kim, Jung Chul; Sung, Young Kwan; Kim, Moonkyu; Paus, Ralf; Plikus, Maksim V

2016-01-01

Hair follicles (HFs) undergo lifelong cyclical transformations, progressing through stages of rapid growth (anagen), regression (catagen), and relative "quiescence" (telogen). Given that HF cycling abnormalities underlie many human hair growth disorders, the accurate classification of individual cycle stages within skin biopsies is clinically important and essential for hair research. For preclinical human hair research purposes, human scalp skin can be xenografted onto immunocompromised mice to study human HF cycling and manipulate long-lasting anagen in vivo. Although available for mice, a comprehensive guide on how to recognize different human hair cycle stages in vivo is lacking. In this article, we present such a guide, which uses objective, well-defined, and reproducible criteria, and integrates simple morphological indicators with advanced, (immuno)-histochemical markers. This guide also characterizes human HF cycling in xenografts and highlights the utility of this model for in vivo hair research. Detailed schematic drawings and representative micrographs provide examples of how best to identify human HF stages, even in suboptimally sectioned tissue, and practical recommendations are given for designing human-on-mouse hair cycle experiments. Thus, this guide seeks to offer a benchmark for human hair cycle stage classification, for both hair research experts and newcomers to the field. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Guided imagery targeting exercise, food cravings, and stress: a multi-modal randomized feasibility trial.

Science.gov (United States)

Giacobbi, Peter; Long, Dustin; Nolan, Richard; Shawley, Samantha; Johnson, Kelsey; Misra, Ranjita

2018-02-01

The purpose of this randomized wait-list controlled trial was to test the feasibility and preliminary efficacy of a guided imagery based multi-behavior intervention intended to address psychological stress, food cravings, and physical activity. Personalized guided imagery scripts were created and participants were instructed to practice guided imagery every day for 35 consecutive days. Of 48 women who enrolled, we report comparisons between 16 randomized to treatment with 19 who were wait-listed (overall M age  = 45.50; M bodymassindex  = 31.43). Study completers reported 89% compliance with practicing guided imagery during the intervention. A significant time-by-group interaction was observed with reductions in food cravings and increases in physical activity compared with wait-list controls. Telephone-based multi-behavior interventions that utilize guided imagery to address food cravings and exercise behavior appear to be acceptable for overweight and obese women. Future phone-based guided imagery research testing this skill to address multiple health behaviors is justified.

MCSA Windows Server 2012 R2 configuring advanced services study guide exam 70-412

CERN Document Server

Panek, William

2015-01-01

The bestselling MCSA study guide, with expert instruction andhands-on practice MCSA Windows Server 2012 R2 Configuring Advanced ServicesStudy Guide provides focused preparation for exam 70-412 and isfully updated to align with the latest Windows Server 2012 R2objectives. This comprehensive guide covers 100 percent of all examobjective domains, and includes hundreds of practice questions andanswers. You get access to video demonstrations, electronicflashcards, and practice exams, and hands-on exercises based onreal-world scenarios allow you to apply your skills to everydaytasks. Organized by o

Forces. 'O' Level Study Guide. Unit 1. ZIM-SCI, Zimbabwe Secondary School Science Project. Year 3.

Science.gov (United States)

Udwin, Martin

The Zimbabwe Secondary School Science Project (ZIM-SCI) developed student study guides, corresponding teaching guides, and science kits for a low-cost science course which could be taught during the third year of secondary school without the aid of qualified teachers and conventional laboratories. This ZIM-SCI study guide is a five-part unit…

Guide for decontaminating swimming pool at schools

International Nuclear Information System (INIS)

Matsuhashi, Shimpei; Kurikami, Hiroshi; Yasuda, Ryo; Takano, Takao; Seko, Noriaki; Naganawa, Hirochika; Kuroki, Ryota; Saegusa, Jun

2012-07-01

Because of TEPCO Fukushima Dai-ichi Nuclear Power Plant accident due to the Great East Japan Earthquake, a huge amount of radioactive materials was widely dispersed and precipitated into the environment. Swimming pools in Fukushima prefectures were contaminated with the radioactives. We JAEA carried out several demonstration tests to decontaminate the radioactives and discharge the pool water safely. We concluded the results obtained from the tests as 'Guide for decontaminating Swimming Pool at School' and released it quickly. Following this, we also released the guide in English. This manuscript, as an experimental report of the swimming pool water decontamination, is consisted from the guide in Japanese and English prepared. (author)

Guide for decontaminating swimming pool at schools

Energy Technology Data Exchange (ETDEWEB)

Matsuhashi, Shimpei; Kurikami, Hiroshi; Yasuda, Ryo; Takano, Takao; Seko, Noriaki; Naganawa, Hirochika; Kuroki, Ryota; Saegusa, Jun

2012-07-15

Because of TEPCO Fukushima Dai-ichi Nuclear Power Plant accident due to the Great East Japan Earthquake, a huge amount of radioactive materials was widely dispersed and precipitated into the environment. Swimming pools in Fukushima prefectures were contaminated with the radioactives. We JAEA carried out several demonstration tests to decontaminate the radioactives and discharge the pool water safely. We concluded the results obtained from the tests as 'Guide for decontaminating Swimming Pool at School' and released it quickly. Following this, we also released the guide in English. This manuscript, as an experimental report of the swimming pool water decontamination, is consisted from the guide in Japanese and English prepared. (author)

Theoretical and experimental study of Gaussian beam and mode propagation in over-dimensioned circular guides

International Nuclear Information System (INIS)

Crenn, J.P.

1984-06-01

A theoretical study of modes in circular hollow over-dimensioned waveguides is developed; it shows the interest of dielectric or weakly conducting wall guide use. An optical model computing the transmitted power of gaussian beams through these guides, for different types of walls, is established. The formulas obtained allow to optimize the guide and to adapt the beam. Applied to the EH 11 mode this optical model leads to new results. Systematical measurements of gaussian beam propagation in over-dimensioned guides are realised; they are concerned with beam power transmission, polarization, its structure and its radiation at the guide exit in function of the different characteristics of the beam and the guide [fr

Supporting research in area studies a guide for academic libraries

CERN Document Server

Pitman, Lesley

2015-01-01

Supporting Research in Area Studies: A Guide for Academic Libraries focuses on the study of other countries or regions of the world, crossing traditional disciplinary boundaries in the humanities and social sciences. The book provides a comprehensive guide for academic libraries supporting communities of researchers, exploring the specialist requirements of these researchers in information resources, resource discovery tools, information skills, and the challenges of working with materials in multiple languages. The book makes the case that adapting systems and procedures to meet these needs will help academic libraries be better placed to support their institutions' international agenda. Early chapters cover the academic landscape, its history, area studies, librarianship, and acquisitions. Subsequent chapters discuss collections management, digital products, and the digital humanities, and their role in academic projects, with final sections exploring information skills and the various disciplinary skills t...

Effect of B-type natriuretic peptide-guided treatment of chronic heart failure on total mortality and hospitalization: an individual patient meta-analysis

NARCIS (Netherlands)

Troughton, Richard W.; Frampton, Christopher M.; Brunner-La Rocca, Hans-Peter; Pfisterer, Matthias; Eurlings, Luc W. M.; Erntell, Hans; Persson, Hans; O'Connor, Christopher M.; Moertl, Deddo; Karlström, Patric; Dahlström, Ulf; Gaggin, Hanna K.; Januzzi, James L.; Berger, Rudolf; Richards, A. Mark; Pinto, Yigal M.; Nicholls, M. Gary

2014-01-01

Natriuretic peptide-guided (NP-guided) treatment of heart failure has been tested against standard clinically guided care in multiple studies, but findings have been limited by study size. We sought to perform an individual patient data meta-analysis to evaluate the effect of NP-guided treatment of

Involving the users remotely: an exploratory study using asynchronous usability testing

Directory of Open Access Journals (Sweden)

Beth Filar Williams

2015-02-01

Full Text Available Open Educational Resources (OER are increasingly used in the higher education landscape as a solution for a variety of copyright, publishing and cost-prohibiting issues. While OERs are becoming more common, reports of usability tests that evaluate how well learners can use them to accomplish their learning tasks have lagged behind. Because both the researchers and the learners in this study use resources and tools remotely, asynchronous usability testing of a prototype OER and MOOC online guide was conducted with an exploratory group of users to determine the guide’s ease of use for two distinct groups of users: Educators and Learners. In this article, we share the background and context of this usability project, suggest best methods for asynchronous remote usability testing, and share challenges and insights of the process and results of the testing

Design of Epoxy based Resin Composites for Automotive Applications: A Case Study on IC Engine Valve Guide

Science.gov (United States)

Sidhu, J. S.; Lathkar, G. S.; Sharma, S. B.

2018-01-01

The present attempt in this project is to reduce the vibrations, temperature due to friction, noise and weight of I C engine valve guide by replacing conventional metal valve guide with composite valve guide. Composite materials have been used in automotive components because of their properties such as low weight, high specific stiffness, corrosion resistance, ability to produce complex shapes, high specific strength and good impact energy absorption etc. The Internal combustion engine valve guides are the parts that support the valves in the cylinder head, besides this it keeps lubricating oil from getting sucked into the combustion chamber past the intake valve stem, it keeps exhaust gases from getting into the crankcase past the exhaust valve stem and it also keeps the valve face in perfect alignment with the valve seat. A valve guide test rig is indigenously fabricated. Valve guides are manufactured using the developed composite material (Resin ARL-136, Hardener AH-126 and 4 vol% WS2), on a CNC lathe. The performance of the developed composite guide under varied conditions of speeds, that is, fixed change in rpm and modulated changes in rpm is assessed. Noise, temperature and vibrations are measured. The experimental data revealed that contribution of composite guide in respect of acceleration, velocity and displacement components of vibration is not substantial. A substantial reduction in noise levels is seen. As far as temperature rise due to friction is concerned maximum components fail at elevated temperatures, with composite guides the temperature generated due to friction at higher speeds is less, a considerable weight reduction is also observed.

The analysis of scientific communications and students’ character development through guided inquiry learning

Science.gov (United States)

Sarwi, S.; Fauziah, N.; Astuti, B.

2018-03-01

This research is setting by the condition of students who have difficulty in ideas delivery, written scientific communication, and still need the development of student character. The objectives of the research are to determine the improvement of concept understanding, to analyze scientific communication skills and to develop the character of the students through guided inquiry learning. The design in this research is quasi experimental control group preposttest, with research subject of two group of grade X Senior High School in Semarang. One group of controller uses non tutorial and treatment group using tutorial in guided inquiry. Based on result of gain test analysis, obtained = 0.71 for treatment and control group = 0.60. The t-test result of mean mastery of concept of quantity and unit using t-test of right side is t count = 2.37 (p=0.003) while t table = 1.67 (α = 5%), which means that the results of the study differed significantly. The results of the students' scientific communication skills analysis showed that the experimental group was higher than the control, with an average of 69% and 63% scientific communication skills. The character values are effective developed through guided inquiry learning. The conclusion of the study is guided inquiry learning tutorial better than guided inquiry non tutorial learning in aspect understanding concept, scientific communication skills; but the character development result is almost the same.

Regulatory compliance guide for DOT-7A type A packaging design

International Nuclear Information System (INIS)

Kelly, D.L.

1996-01-01

The purpose of this guide is to provide instruction for assuring that the regulatory design requirements for a DOT-7A Type A packaging are met. This guide also supports the testing and evaluation activities that are performed on new packaging designs by a DOE-approved test facility through the DOE's DOT-7A Test Program. This Guide was updated to incorporate regulatory changes implemented by HM-169A (49 CFR, 'Transportation')

Guide for preparing annual reports on radiation-safety testing of electronic products (general)

International Nuclear Information System (INIS)

1987-10-01

For manufacturers of electronic products other than those for which a specific guide has been issued, the guide replaces the Guide for the Filing of Annual Reports (21 CFR Subchapter J, Section 1002.11), HHS Publication FDA 82-8127. The electronic product (general) annual reporting guide is applicable to the following products: products intended to produce x radiation (accelerators, analytical devices, therapy x-ray machines); microwave diathermy machines; cold-cathode discharge tubes; and vacuum switches and tubes operating at or above 15,000 volts. To carry out its responsibilities under Public Law 90-602, the Food and Drug Administration's Center for Devices and Radiological Health (CDRH) has issued a series of regulations contained in Title 21 of the Code of Federal Regulations (CFR). Part 1002 of 21 CFR deals with records and reports. Section 1002.61 categorizes electronic products into Groups A through C. Section 1002.30 requires manufacturers of products in Groups B and C to establish and maintain certain records, while Section 1002.11 requires such manufacturers to submit an Annual Report summarizing the contents of the required records. Section 1002.7 requires that reports conform to reporting guides issued by CDRH unless an acceptable justification for an alternate format is provided

Ultrasound guided percutaneous fine needle aspiration biopsy ...

African Journals Online (AJOL)

2011-06-15

Jun 15, 2011 ... guided PFNAB/US-guided PNCB was the diagnostic test in 23.33% cases. It confirmed a highly ..... provides guidance in multiple axial, longitudinal and .... Source of Support: Nil, Con.ict of Interest: None declared. Gani, et al.

Cost-Effectiveness of Mobile App-Guided Training in Extended Focused Assessment with Sonography for Trauma (eFAST)

DEFF Research Database (Denmark)

Nilsson, Philip Morkeberg; Todsen, Tobias; Subhi, Yousif

2017-01-01

the cost-effectiveness of mobile app-guided training versus traditional formats such as textbook-guided training. This study evaluated the cost-effectiveness of mobile app-guided versus textbook-guided ultrasound training. Material and methods First-year residents (n?=?38) with no previous ultrasound...... Structured Assessment of Ultrasound Skills (OSAUS) scale. The costs of developing mobile app and textbook material were calculated and used for the analysis of cost-effectiveness. Results 34 participants completed the transfer test. There was no statistically significant difference in test performance...... or diagnostic accuracy between the mobile app-guided (mean-OSAUS 42.3?% [95?%CI38.5?–?46.0?%]) and textbook-guided groups (mean-OSAUS 45.3?% [95?%CI39.3?–?51.3?%]) (d.f. [1.33]?=?0.45, p?=?0.41). However, development costs differed greatly for each instructional format. Textbook-guided training...

A computational fluid dynamics modeling study of guide walls for downstream fish passage

Science.gov (United States)

Mulligan, Kevin; Towler, Brett; Haro, Alexander J.; Ahlfeld, David P.

2017-01-01

A partial-depth, impermeable guidance structure (or guide wall) for downstream fish passage is typically constructed as a series of panels attached to a floating boom and anchored across a water body (e.g. river channel, reservoir, or power canal). The downstream terminus of the wall is generally located nearby to a fish bypass structure. If guidance is successful, the fish will avoid entrainment in a dangerous intake structure (i.e. turbine intakes) while passing from the headpond to the tailwater of a hydroelectric facility through a safer passage route (i.e. the bypass). The goal of this study is to determine the combination of guide wall design parameters that will most likely increase the chance of surface-oriented fish being successfully guided to the bypass. To evaluate the flow field immediately upstream of a guide wall, a parameterized computational fluid dynamics model of an idealized power canal was constructed in © ANSYS Fluent v 14.5 (ANSYS Inc., 2012). The design parameters investigated were the angle and depth of the guide wall and the average approach velocity in the power canal. Results call attention to the importance of the downward to sweeping flow ratio and demonstrate how a change in guide wall depth and angle can affect this important hydraulic cue to out-migrating fish. The key findings indicate that a guide wall set at a small angle (15° is the minimum in this study) and deep enough such that sweeping flow dominant conditions prevail within the expected vertical distribution of fish approaching the structure will produce hydraulic conditions that are more likely to result in effective passage.

Ex-vivo sensitivity profiling to guide clinical decision making in acute myeloid leukemia: A pilot study.

Science.gov (United States)

Swords, Ronan T; Azzam, Diana; Al-Ali, Hassan; Lohse, Ines; Volmar, Claude-Henry; Watts, Justin M; Perez, Aymee; Rodriguez, Ana; Vargas, Fernando; Elias, Roy; Vega, Francisco; Zelent, Arthur; Brothers, Shaun P; Abbasi, Taher; Trent, Jonathan; Rangwala, Shaukat; Deutsch, Yehuda; Conneally, Eibhlin; Drusbosky, Leylah; Cogle, Christopher R; Wahlestedt, Claes

2018-01-01

A precision medicine approach is appealing for use in AML due to ease of access to tumor samples and the significant variability in the patients' response to treatment. Attempts to establish a precision medicine platform for AML, however, have been unsuccessful, at least in part due to the use of small compound panels and having relatively slow turn over rates, which restricts the scope of treatment and delays its onset. For this pilot study, we evaluated a cohort of 12 patients with refractory AML using an ex vivo drug sensitivity testing (DST) platform. Purified AML blasts were screened with a panel of 215 FDA-approved compounds and treatment response was evaluated after 72h of exposure. Drug sensitivity scoring was reported to the treating physician, and patients were then treated with either DST- or non-DST guided therapy. We observed survival benefit of DST-guided therapy as compared to the survival of patients treated according to physician recommendation. Three out of four DST-treated patients displayed treatment response, while all of the non-DST-guided patients progressed during treatment. DST rapidly and effectively provides personalized treatment recommendations for patients with refractory AML. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Experimental studies of laser guiding and wake excitation in plasma channels

International Nuclear Information System (INIS)

Volfbeyn, P.; Lawrence Berkeley National Lab., CA

1998-06-01

This thesis presents results of experimental investigations of laser guiding in plasma channels. A new technique for plasma channel creation, the Ignitor-Heater scheme was proposed and experimentally tested in hydrogen and nitrogen. It made use of two laser pulses. The Ignitor, an ultrashort ( 17 W/cm 2 , 75fs laser pulse. The guiding properties and transmission and coupling efficiency were studied as a function of relative position of the channel and the injection pulse focus. Whereas entrance coupling efficiency into the channel was lower than expected, channel coupling to continuum losses were found to be in good agreement with analytical predictions. The authors speculate that increased coupling efficiency can be achieved through better mode matching into the channel. Analytic and numerical one dimensional (1-D), nonrelativistic theory of laser pulse propagation in underdense plasma was presented, in the context of laser wakefield acceleration. The relation between the laser pulse energy depletion, longitudinal laser pulse shape distortion, and changes in the group velocity and center wavelength was explored. 1-D theory was extended to treat the case of a laser exciting a wake in a hollow plasma channel, by making use of an energy conservation argument. Based on the results of this theory, a laser wakefield diagnostic was proposed where, by measuring the changes in phase or spectrum of the driving laser pulse, it is possible to infer the amplitude of the plasma wake

The study on nondestructive evaluation for a tubular structure by the lamb-type guided wave wedge

International Nuclear Information System (INIS)

Cho, Yun Ho; Park, Jung Chul

1998-01-01

The study on the cylindrical guided wave was carried out to investigate its feasibility for nondestructive evaluation of tubular structures such as heat exchanger tubings of power industries and various pipings of chemical plants. The concept of wedge design and incident angle selection to optimize guided wave generation is presented based on the dispersion theory and the snell's law for the cylindrical guided wave. The brass tubes with artificial defects in the circumferential or axial direction were used for detect defection experiments. It was found that guided wave sensitivity for detecting an axial defect can be remarkably improved by using non-axisymmetrically launched guided waves. Through this study, it is expected that the guided wave can be successfully applied to tubular structure inspections as an more advanced and efficient NDE technique than a conventional point-by-point technique.

AWS certified solutions architect official study guide associate exam

CERN Document Server

Baron, Joe; Bixler, Tim; Gaut, Biff; Kelly, Kevin E; Senior, Sean; Stamper, John

2017-01-01

This is your opportunity to take the next step in your career by expanding and validating your skills on the AWS cloud. AWS has been the frontrunner in cloud computing products and services, and the AWS Certified Solutions Architect Official Study Guide for the Associate exam will get you fully prepared through expert content, and real-world knowledge, key exam essentials, chapter review questions, access to Sybex's interactive online learning environment, and much more. This official study guide, written by AWS experts, covers exam concepts, and provides key review on exam topics, including: * Mapping Multi-Tier Architectures to AWS Services, such as web/app servers, firewalls, caches and load balancers * Understanding managed RDBMS through AWS RDS (MySQL, Oracle, SQL Server, Postgres, Aurora) * Understanding Loose Coupling and Stateless Systems * Comparing Different Consistency Models in AWS Services * Understanding how AWS CloudFront can make your application more cost efficient, faster and secure * Implem...

76 FR 71341 - BASINS and WEPP Climate Assessment Tools: Case Study Guide to Potential Applications

Science.gov (United States)

2011-11-17

... Climate Assessment Tools: Case Study Guide to Potential Applications AGENCY: Environmental Protection... Tools (CAT): Case Study Guide to Potential Applications (EPA/600/R-11/123A). EPA also is announcing that... report presents a series of short case studies designed to illustrate the capabilities of these tools for...

Edexcel A2 Physics Student Unit Guide

CERN Document Server

Benn, Mike

2010-01-01

Student Unit Guides are perfect for revision. Each guide is written by an examiner and explains the unit requirements, summarises the relevant unit content and includes a series of specimen questions and answers. There are three sections to each guide:. Introduction - includes advice on how to use the guide, an explanation of the skills being tested by the assessment objectives, an outline of the unit or module and, depending on the unit, suggestions for how to revise effectively and prepare for the examination questions. Content Guidance - provides an examiner's overview of the module's key t

AQA A2 Chemistry Student Unit Guide

CERN Document Server

Cross, Margaret

2010-01-01

Student Unit Guides are perfect for revision. Each guide is written by an examiner and explains the unit requirements, summarises the relevant unit content and includes a series of specimen questions and answers. There are three sections to each guide:. Introduction - includes advice on how to use the guide, an explanation of the skills being tested by the assessment objectives, an outline of the unit or module and, depending on the unit, suggestions for how to revise effectively and prepare for the examination questions. Content Guidance - provides an examiner's overview of the module's key t

Ageing tests study on wood-based sandwich panels

Directory of Open Access Journals (Sweden)

Mateo, Raquel

2011-12-01

Full Text Available Composite lightweight wood panels are being increasingly used in construction in Spain. Their growing use should be accompanied by necessary guarantees based on studies of their properties. As it is prescriptive and in addition to others tests, in the present work is examinated the durability of these panels when exposed to the climatic conditions, a characteristic of great importance for wood products, according to Guide ETAG 016, the current standard defining the ageing tests to be used. However, due to the use class of this material, there are indications that the testing outlined in this Guide is inappropriate for assessing the ageing of wood-based sandwich panels. Alternative tests are here proposed that recreate rather better the real conditions under which these products are used. Covering the samples in a waterproof sheeting permeable to the outward movement of water vapour, which is in fact used in the installation, provided the best procedure for testing these panels.

Los paneles sándwich de madera son un producto de creciente aplicación en la edificación de nuestro país. Este ascendente uso del material debe estar acompañado de las garantías necesarias avaladas por un estudio previo de sus prestaciones. Como es preceptivo y entre otros, se evalúa su durabilidad frente a las condiciones climatológicas, clave en los productos derivados de la madera, acorde a la normativa actual definida con tal fin, la Guía ETAG 016. Sin embargo, debido a la clase de uso del material, se ha detectado que dicha normativa tal y como está concebida no es capaz de valorar su envejecimiento adecuadamente. En este trabajo se proponen ensayos alternativos al establecido tras exhaustivos análisis que recrean las condiciones reales de uso y más acordes a los productos de madera. Se concluye que la incorporación de una lámina impermeable pero permeable al vapor de agua hacia el exterior, como las utilizadas en el montaje, aportan el mejor

Object-oriented design and programming with C++ your hands-on guide to C++ programming, with special emphasis on design, testing, and reuse

CERN Document Server

Leach, Ronald

2014-01-01

Object-Oriented Design and Programming with C++: Your Hands-On Guide to C++ Programming, with Special Emphasis on Design, Testing, and Reuse provides a list of software engineering principles to guide the software development process. This book presents the fundamentals of the C++ language.Organized into two parts encompassing 10 chapters, this book begins with an overview of C++ and describes object-oriented programming and the history of C++. This text then introduces classes, polymorphism, inheritance, and overloading. Other chapters consider the C++ preprocessor and organization of class l

A hybrid charged-particle guide for studying (n, charged particle) reactions

International Nuclear Information System (INIS)

Haight, R.C.; White, R.M.; Zinkle, S.J.

1983-01-01

Charged-particle transport systems consisting of magnetic quadrupole lenses have been employed in recent years in the study of (n, charged particle) reactions. A new transport system was completed at the laboratory that is based both on magnetic lenses as well as electrostatic fields. The magnetic focusing of the charged-particle guide is provided by six magnetic quadrupole lenses arranged in a CDCCDC sequence (in the vertical plane). The electrostatic field is produced by a wire at high voltage which stretches the length of the guide and is physically at the centre of the magnetic axis. The magnetic lenses are used for charged particles above 5 MeV; the electrostatic guide is used for lower energies. This hybrid system possesses the excellent focusing and background rejection properties of other magnetic systems. For low energy charged-particles, the electrostatic transport avoids the narrow band-passes in charged-particle energy which are a problem with purely magnetic transport systems. This system is installed at the LLNL Cyclograaff facility for the study of (n, charged particle) reactions at neutron energies up to 35 MeV. (Auth.)

CWAP Certified Wireless Analysis Professional Official Study Guide Exam PW0-270

CERN Document Server

Westcott, David A; Miller, Ben; Mackenzie, Peter

2011-01-01

The official study guide for the Certified Wireless Analysis Professional certification from CWNPFour leading wireless experts thoroughly prepare you for the vendor-neutral CWAP exam administered by CWNP, the industry leader for enterprise Wi-Fi training and certification.  This official study guide not only covers all exam objectives for the CWAP exam, it also prepares you to administer and troubleshoot complex enterprise WLAN environments.Covers all exam objectives for the Certified Wireless Analysis Professional (CWAP) examCovers 802.11 physical (PHY) and 802.11 MAC layer frame formats and

Career Preparation in Agricultural Resources: A Curriculum Guide for High School Vocational Agriculture. Test Edition.

Science.gov (United States)

Householder, Larry

This curriculum guide in agricultural resources is one of 10 guides developed as part of a vocational project stressing agribusiness, natural resources, and environmental protection. The scope of this guide includes eight occupational subgroups: fish, forestry, mining area restoration, outdoor recreation, soil, range, water, and wildlife. It is…

The Effectiveness of Guided Inquiry-based Learning Material on Students’ Science Literacy Skills

Science.gov (United States)

Aulia, E. V.; Poedjiastoeti, S.; Agustini, R.

2018-01-01

The purpose of this research is to describe the effectiveness of guided inquiry-based learning material to improve students’ science literacy skills on solubility and solubility product concepts. This study used Research and Development (R&D) design and was implemented to the 11th graders of Muhammadiyah 4 Senior High School Surabaya in 2016/2017 academic year with one group pre-test and post-test design. The data collection techniques used were validation, observation, test, and questionnaire. The results of this research showed that the students’ science literacy skills are different after implementation of guided inquiry-based learning material. The guided inquiry-based learning material is effective to improve students’ science literacy skills on solubility and solubility product concepts by getting N-gain score with medium and high category. This improvement caused by the developed learning material such as lesson plan, student worksheet, and science literacy skill tests were categorized as valid and very valid. In addition, each of the learning phases in lesson plan has been well implemented. Therefore, it can be concluded that the guided inquiry-based learning material are effective to improve students’ science literacy skills on solubility and solubility product concepts in senior high school.

Ute Unit: Study Guide and Follow Up Activities.

Science.gov (United States)

North Conejos School District, Capulin, CO.

The study guide and follow-up activities were designed primarily to give students a feeling of Ute life in the San Luis Valley in Colorado. The unit begins with six Southern Ute stories about the wolf and coyote, the race between the skunk and the coyote, the frog and the eagle, why the frog croaks, the bear (Que Ye Qat), and the two Indian…

Simulation study on the cold neutron guides in China advanced research reactor

International Nuclear Information System (INIS)

Guo Liping; Yang Tonghua; Wang Hongli; Sun Kai; Zhao Zhixiang

2003-01-01

The designs of the two cold neutron guides, CNG1 and CNG2, to be built in China advanced research reactor (CARR) are studied with Monte-Carlo simulation technique. The neutron flux density at the exit of the both guides can reach above 1 x10 9 cm -2 ·s -1 under the assumed flux spectrum of the cold neutron source. The transmission efficiency is 50% and 42%, and the maximum divergence is about 2.2 degree and 1.9 degree, respectively for CNG1 and CNG2. Neutron distribution along horizontal direction is quite uniform for both guides, with maximum fluctuation of less than 3%. Gravity can affect neutron distribution along vertical direction considerably

75 FR 12804 - Withdrawal of Regulatory Guide 8.6

Science.gov (United States)

2010-03-17

... ``Regulatory Guides'' in the NRC's Electronic Reading Room at http://www.nrc.gov/reading-rm/doc-collections... NUCLEAR REGULATORY COMMISSION [NRC-2010-0103] Withdrawal of Regulatory Guide 8.6 AGENCY: Nuclear Regulatory Commission. ACTION: Withdrawal of Regulatory Guide 8.6, ``Standard Test Procedure for Geiger-M...

Water harvesting and soil moisture retention: A study guide for farmer field schools

OpenAIRE

Duveskog, D.

2001-01-01

Metadata only record Since a majority of individuals in Sub-Saharan Africa depend on rainfed agriculture, it is necessary to provide tools that will better equip these individuals to increase their yields and improve their farming techniques. This study guide is intended to assist farmers in learning and experimenting on improved soil and water management. The target groups for the study guide are Farmer Field Schools, village farmers groups and local agricultural extension staff. Avail...

Praxis II mathematics content knowledge test (0061)

CERN Document Server

McCune, Ennis Donice

2007-01-01

Your guide to a higher score on the Praxis II?: Mathematics Content Knowledge Test (0061) Why CliffsTestPrep Guides? Go with the name you know and trust Get the information you need--fast! Written by test-prep specialists About the contents: Introduction * Overview of the exam * How to use this book * Proven study strategies and test-taking tips Part I: Subject Review * Focused review of all exam topics: arithmetic and basic algebra, geometry, trigonometry, analytic geometry, functions and their graphs, calculus, probability and statistics, discrete mathematics, linear algebra, compute

Malcolm X in Context: A Study Guide to the Man and His Times.

Science.gov (United States)

Murphy, Don, Ed.; Radtke, Jennifer, Ed.

This study guide is designed for those with varying levels of understanding to open possible contexts to consider Malcolm X and develop some of the critical thinking skills necessary to make sense out of any complex historical phenomena and to suggest to students some directions for further research. The guide uses the "Autobiography of…

American Indian Studies. Library Research Guide. 2nd Edition.

Science.gov (United States)

White, Phillip M.

This guide to sources for San Diego (California) State University students doing library research on topics related to American Indian Studies begins by noting that information on North American Indians can be found in a variety of subject disciplines including history, anthropology, education, sociology, health care, law, business, and politics.…

CT-guided percutaneous cryoablation of osteoid osteoma in children: an initial study

International Nuclear Information System (INIS)

Wu, Bin; Xiao, Yue-Yong; Zhang, Xiao; Zhao, Lei; Carrino, John A.

2011-01-01

The purpose of this study was to evaluate the safety and efficacy of CT-guided percutaneous cryoablation for osteoid osteoma in children. This study was approved by the institutional ethics committee. From January 2007 to July 2008, six children (four boys, two girls, mean age 12.6 years old) with osteoid osteoma were treated with CT-guided percutaneous cryoablation. The procedures were carried out under conscious sedation and local anesthesia. CT guidance was used for procedural planning, instrument guidance, and monitoring. An argon-based cryoablation system was used. Each cryoablation included two freezing-thawing cycles. Follow-up was performed to assess technical and clinical outcome for a minimum of 12 months. A visual analog scale (VAS) was used to assess severity of pain pre- and post-procedure, and mean VAS for the group was compared pre- and post-procedure with a t-test. The mean clinical follow-up period was 28.7 months (ranging from 18 to 36 months). Cryoablation was technically and clinically successful for all patients. No major immediate or delayed complications were observed. Significant pain relief (P <0.05) was observed in all patients after operation. Mean VAS were 6.57 ± 0.55 pre-procedure and 0.57 ± 0.10 1 month post-procedure. Patients were allowed to fully bear their weight and function without limitation within 3 days after the procedure. Pain recurrence was not observed in any patient. Percutaneous cryoablation is safe and effective for the treatment of osteoid osteomas in children. Notably, this procedure can be accomplished without general anesthesia. (orig.)

Introduction to Production/Manufacturing Drafting. Drafting Module 8. Instructor's Guide.

Science.gov (United States)

Missouri Univ., Columbia. Instructional Materials Lab.

This module, 1 of 10 in the Drafting curriculum guide developed in Missouri, contains 3 units of study that include some or all of the following components: performance objectives, lesson plans, information sheets, transparency masters, handouts, assignment sheets, job sheets, a unit test, and answers to the unit test. Special instructions on…

MCTS Microsoft SharePoint 2010 Configuration Study Guide Exam 70-667

CERN Document Server

Pyles, James

2010-01-01

A Sybex study guide for the new SharePoint Server 2010 Configuration examSharePoint holds 55 percent of the collaboration and content management market, with many more companies indicating they plan to join the fold. IT professionals interested in enhancing their marketability with the new Microsoft Certified Technology Specialist: Microsoft SharePoint Server 2010 Configuring exam will find this guide may be their only alternative to costly classroom training.Microsoft SharePoint claims over half the market for collaboration and content management software; IT professionals will boost their ma

Numerical studies of nonlinear ultrasonic guided waves in uniform waveguides with arbitrary cross sections

Energy Technology Data Exchange (ETDEWEB)

Zuo, Peng; Fan, Zheng, E-mail: ZFAN@ntu.edu.sg [School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798 (Singapore); Zhou, Yu [Advanced Remanufacturing and Technology Center (ARTC), 3 Clean Tech Loop, CleanTech Two, Singapore 637143 (Singapore)

2016-07-15

Nonlinear guided waves have been investigated widely in simple geometries, such as plates, pipe and shells, where analytical solutions have been developed. This paper extends the application of nonlinear guided waves to waveguides with arbitrary cross sections. The criteria for the existence of nonlinear guided waves were summarized based on the finite deformation theory and nonlinear material properties. Numerical models were developed for the analysis of nonlinear guided waves in complex geometries, including nonlinear Semi-Analytical Finite Element (SAFE) method to identify internal resonant modes in complex waveguides, and Finite Element (FE) models to simulate the nonlinear wave propagation at resonant frequencies. Two examples, an aluminum plate and a steel rectangular bar, were studied using the proposed numerical model, demonstrating the existence of nonlinear guided waves in such structures and the energy transfer from primary to secondary modes.

Study of the precision guided communication of digital television

Science.gov (United States)

Liu, Lun

2012-04-01

Along with the progress and development of the digital technology, there produced the transmission of the new media by medium of such as the network, mobile phones and the digital television, while among them digital TV has the superiority of other media. The appearance and development of digital TV will induce a profound change in the broadcasting and television industry chain. This paper started with discussing the transformation of digital television in profit model, mode of operation and mode of transmission to construct the precision-guided communication theory; And then analyzes the properties and marketing nature of the precision-guided communication to make the construction of the precision-guided communication marketing mode; And put forward the implementing of the precision-guided communication marketing strategies and concrete steps; At the end of the article the author summarized four conclusions.

An interactive parents' guide for feeding preschool-aged children: pilot studies for improvement.

Science.gov (United States)

Reznar, Melissa M; Carlson, John S; Hughes, Sheryl O; Pavangadkar, Amol S; Scott, Marci K; Hoerr, Sharon L

2014-05-01

There are few motivational materials to help families with limited resources develop optimal, practical feeding strategies for young children to reduce dietary risk for poor diet and weight status. Formative evaluation strategies consisting of both qualitative and quantitative data helped to refine the parent feeding guide Eat Healthy, Your Children are Watching, A Parent's Guide to Raising a Healthy Eater. An interdisciplinary planning team developed a five-topic, multimedia, interactive guide addressing the strategies most associated with improved diet quality and weight status of children aged 3 to 5 years. Research staff conducted iterative phases of field testing, reformatting, in-depth interviews, and materials testing with Head Start or Supplemental Nutrition Assistance Program-Education caregivers (N=38) of children aged 3 to 5 years during 2011 and 2012. Convergence of feedback from caregivers' interviews and each booklet's attention, relevance, confidence, and satisfaction subscale scores were used to determine and affirm areas for improvement. Lower than desired attention, relevance, confidence, and satisfaction scores (optimal score=5) in 2011 and too much text resulted in revisions and reformatting that improved scores from 3.8 to 4.9 in 2012. The revision of materials to reflect less text, additional white space, checklists of mealtime behaviors, and learning activities for preschool-aged children resulted in dramatically improved materials and greater acceptance by parents, as shown by both quantitative and qualitative evaluations. Formative evaluation procedures involving the use of data-based decision making allowed for the development of intervention materials that met the unique needs of the population served. Copyright © 2014 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Experiment Design and Analysis Guide - Neutronics & Physics

Energy Technology Data Exchange (ETDEWEB)

Misti A Lillo

2014-06-01

The purpose of this guide is to provide a consistent, standardized approach to performing neutronics/physics analysis for experiments inserted into the Advanced Test Reactor (ATR). This document provides neutronics/physics analysis guidance to support experiment design and analysis needs for experiments irradiated in the ATR. This guide addresses neutronics/physics analysis in support of experiment design, experiment safety, and experiment program objectives and goals. The intent of this guide is to provide a standardized approach for performing typical neutronics/physics analyses. Deviation from this guide is allowed provided that neutronics/physics analysis details are properly documented in an analysis report.

Novel study guides for biochemistry meaningful learning in biology: a design-based research

Directory of Open Access Journals (Sweden)

Caetano da Costa

2017-12-01

Full Text Available To address the usually decontextualized transmission of information in biochemistry teaching, three interventions in a discipline (Metabolism for Biology majors were applied as innovative study guides. We describe the development, application, and evaluation of two study guides, contextualized with a real problem or an integrative view, using broad themes like evolution and metabolic adaptation. In order to evaluate the impact of both interventions on interest, motivation, and learning of the metabolic pathways, a design-based research with cycles of application and assessment was carried out, by means of classroom observation, grade analysis in written exams, and students’ interviews. Analysis and interpretation of the results point to benefits for teaching and learning, with helpful information to guide elaboration and refinement of new teaching materials and to make active learning more meaningful.

MRI-guided vacuum-assisted breast biopsy: comparison with stereotactically guided and ultrasound-guided techniques

Energy Technology Data Exchange (ETDEWEB)

Imschweiler, Thomas; Freiwald, Bianka; Kubik-Huch, Rahel A. [Kantonspital Baden AG, Institute for Radiology, Baden (Switzerland); Haueisen, Harald [Kantonspital Aarau AG, Institute for Radiology, Aarau (Switzerland); Kampmann, Gert [Clinica Sant' Anna, Lugano, Sorengo (Switzerland); Rageth, Luzi [Adjumed Services AG, Zurich (Switzerland); Seifert, Burkhardt [Institute for Social and Preventive Medicine, University of Zurich, Division of Biostatistics, Zuerich (Switzerland); Rageth, Christoph [Breast Centre, Zurich (Switzerland)

2014-01-15

To analyse the development of MRI-guided vacuum-assisted biopsy (VAB) in Switzerland and to compare the procedure with stereotactically guided and ultrasound-guided VAB. We performed a retrospective analysis of VABs between 2009 and 2011. A total of 9,113 VABs were performed. Of these, 557 were MRI guided. MRI-guided VAB showed the highest growth rate (97 %) of all three procedures. The technical success rates for MRI-guided, stereotactically guided and ultrasound-guided VAB were 98.4 % (548/557), 99.1 % (5,904/5,960) and 99.6 % (2,585/2,596), respectively. There were no significant differences (P = 0.12) between the MRI-guided and the stereotactically guided procedures. The technical success rate for ultrasound-guided VAB was significantly higher than that for MRI-guided VAB (P < 0.001). There were no complications using MRI-guided VAB requiring open surgery. The malignancy diagnosis rate for MRI-guided VAB was similar to that for stereotactically guided VAB (P = 0.35). MRI-guided VAB is a safe and accurate procedure that provides insight into clinical breast findings. (orig.)

Coaxial guiding assembly for internal through-passing probe for eddy current testing of tubes

International Nuclear Information System (INIS)

Kubis, S.; Holec, P.

1989-01-01

The device features guiding cases mounted on springs provided on the peripheries with two rows of radial openings into which are wound flexible fibres parallel with the case axis. The advantage of the design is that active elements which provide the coaxial guiding of the probe are oriented in the direction of the probe movement. This significantly reduces friction between the probe and the internal wall of the tube and thereby also wear of the guide parts of the probe. (J.B.). 2 figs

Cost-Effectiveness of Mobile App-Guided Training in Extended Focused Assessment with Sonography for Trauma (eFAST): A Randomized Trial.

Science.gov (United States)

Nilsson, Philip Mørkeberg; Todsen, Tobias; Subhi, Yousif; Graumann, Ole; Nolsøe, Christian Pallson; Tolsgaard, Martin Grønnebæk

2017-12-01

 Ultrasound training is associated with a long learning curve and use of substantial faculty resources. Self-directed ultrasound training may decrease the need for faculty-led teaching. Mobile apps seem promising for use in self-directed ultrasound training, but no studies have examined the cost-effectiveness of mobile app-guided training versus traditional formats such as textbook-guided training. This study evaluated the cost-effectiveness of mobile app-guided versus textbook-guided ultrasound training.  First-year residents (n = 38) with no previous ultrasound experience were randomized into mobile app-guided versus textbook-guided self-directed ultrasound training groups. Participants completed a transfer test involving four patient cases and a theoretical test on diagnostic accuracy. Two ultrasound experts assessed the residents' performance using the Objective Structured Assessment of Ultrasound Skills (OSAUS) scale. The costs of developing mobile app and textbook material were calculated and used for the analysis of cost-effectiveness.  34 participants completed the transfer test. There was no statistically significant difference in test performance or diagnostic accuracy between the mobile app-guided (mean-OSAUS 42.3 % [95 %CI38.5 - 46.0 %]) and textbook-guided groups (mean-OSAUS 45.3 % [95 %CI39.3 - 51.3 %]) (d.f. [1.33] = 0.45, p = 0.41). However, development costs differed greatly for each instructional format. Textbook-guided training was significantly more cost-effective than mobile app-guided training (Incremental Cost Effectiveness Ratio -861 967 [95 %CI-1071.7 to-3.2] USD/pct. point change in OSAUS score).  Mobile app-guided ultrasound training is less cost-effective than textbook-guided self-directed training. This study underlines the need for careful evaluation of cost-effectiveness when introducing technological innovations for clinical skills training. © Georg Thieme Verlag KG Stuttgart · New York.

Neuronavigation-guided focused ultrasound-induced blood-brain barrier opening: A preliminary study in swine

Science.gov (United States)

Liu, Hao-Li; Tsai, Hong-Chieh; Lu, Yu-Jen; Wei, Kuo-Chen

2012-11-01

FUS-induced BBB opening is a promising technique for noninvasive and local delivery of drugs into the brain. Here we propose the novel use of a neuronavigation system to guide the FUS-induced BBB opening procedure, and investigate its feasibility in vivo in large animals. We developed an interface between the neuronavigator and FUS to allow guidance of the focal energy produced by the FUS transducer. The system was tested in 29 pigs by more than 40 sonication procedures and evaluated by MRI. Gd-DTPA concentration was quantitated in vivo by MRI R1 relaxometry and compared by ICP-OES assay. Brain histology after FUS exposure was investigated by HE and TUNEL staining. Neuronavigation could successfully guide the focal beam with comparable precision to neurosurgical stereotactic procedures (2.3 ± 0.9 mm). FUS pressure of 0.43 MPa resulted in consistent BBB-opening. Neuronavigation-guided BBB-opening increased Gd-DTPA deposition by up to 1.83 mM (140% increase). MR relaxometry demonstrated high correlation to ICP-OES measurements (r2 = 0.822), suggesting that Gd-DTPA deposition can be directly measured by imaging. Neuronavigation could provide sufficient precision for guiding FUS to temporally and locally open the BBB. Gd-DTPA deposition in the brain could be quantified by MR relaxometry, providing a potential tool for the in vivo quantification of therapeutic agents in CNS disease treatment.

The value of telemonitoring and ICT-guided disease management in heart failure: Results from the IN TOUCH study.

Science.gov (United States)

Kraai, Imke; de Vries, Arjen; Vermeulen, Karin; van Deursen, Vincent; van der Wal, Martje; de Jong, Richard; van Dijk, René; Jaarsma, Tiny; Hillege, Hans; Lesman, Ivonne

2016-01-01

It is still unclear whether telemonitoring reduces hospitalization and mortality in heart failure (HF) patients and whether adding an Information and Computing Technology-guided-disease-management-system (ICT-guided-DMS) improves clinical and patient reported outcomes or reduces healthcare costs. A multicenter randomized controlled trial was performed testing the effects of INnovative ICT-guided-DMS combined with Telemonitoring in OUtpatient clinics for Chronic HF patients (IN TOUCH) with in total 179 patients (mean age 69 years; 72% male; 77% in New York Heart Association Classification (NYHA) III-IV; mean left ventricular ejection fraction was 28%). Patients were randomized to ICT-guided-DMS or to ICT-guided-DMS+telemonitoring with a follow-up of nine months. The composite endpoint included mortality, HF-readmission and change in health-related quality of life (HR-QoL). In total 177 patients were eligible for analyses. The mean score of the primary composite endpoint was -0.63 in ICT-guided-DMS vs. -0.73 in ICT-guided-DMS+telemonitoring (mean difference 0.1, 95% CI: -0.67 +0.82, p=0.39). All-cause mortality in ICT-guided-DMS was 12% versus 15% in ICT-guided-DMS+telemonitoring (p=0.27); HF-readmission 28% vs. 27% p=0.87; all-cause readmission was 49% vs. 51% (p=0.78). HR-QoL improved in most patients and was equal in both groups. Incremental costs were €1360 in favor of ICT-guided-DMS. ICT-guided-DMS+telemonitoring had significantly fewer HF-outpatient-clinic visits (pmanagement of HF patients did not affect the primary and secondary endpoints. However, we did find a reduction in visits to the HF-outpatient clinic in this group suggesting that telemonitoring might be safe to use in reorganizing HF-care with relatively low costs. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

A Study on Techniques for Focusing Circumferential Array Guided Waves for Long Range Inspection of Pipes

International Nuclear Information System (INIS)

Kang, To; Kim, Hak Joon; Song, Sung Jin; Cho, Young Do; Lee, Dong Hoon; Cho, Hyun Joon

2009-01-01

Ultrasonic guided waves have been widely utilized for long range inspection of structures. Especially, development of array guided waves techniques and its application for long range gas pipe lines(length of from hundreds meters to few km) were getting increased. In this study, focusing algorithm for array guided waves was developed in order to improve long range inspectability and accuracy of the array guided waves techniques for long range inspection of gas pipes, and performance of the developed techniques was verified by experiments using the developed array guided wave system. As a result, S/N ratio of array guided wave signals obtained with the focusing algorithm was increased higher than that of signals without focusing algorithm

Downstream fish passage guide walls: A hydraulic scale model analysis

Science.gov (United States)

Mulligan, Kevin; Towler, Brett; Haro, Alexander J.; Ahlfeld, David P.

2018-01-01

Partial-depth guide walls are used to improve passage efficiency and reduce the delay of out-migrating anadromous fish species by guiding fish to a bypass route (i.e. weir, pipe, sluice gate) that circumvents the turbine intakes, where survival is usually lower. Evaluation and monitoring studies, however, indicate a high propensity for some fish to pass underneath, rather than along, the guide walls, compromising their effectiveness. In the present study we evaluated a range of guide wall structures to identify where/if the flow field shifts from sweeping (i.e. flow direction primarily along the wall and towards the bypass) to downward-dominant. Many migratory fish species, particularly juveniles, are known to drift with the flow and/or exhibit rheotactic behaviour during their migration. When these behaviours are present, fish follow the path of the flow field. Hence, maintaining a strong sweeping velocity in relation to the downward velocity along a guide wall is essential to successful fish guidance. Nine experiments were conducted to measure the three-dimensional velocity components upstream of a scale model guide wall set at a wide range of depths and angles to flow. Results demonstrated how each guide wall configuration affected the three-dimensional velocity components, and hence the downward and sweeping velocity, along the full length of the guide wall. In general, the velocities produced in the scale model were sweeping dominant near the water surface and either downward dominant or close to the transitional depth near the bottom of the guide wall. The primary exception to this shift from sweeping do downward flow was for the minimum guide wall angle tested in this study (15°). At 15° the flow pattern was fully sweeping dominant for every cross-section, indicating that a guide wall with a relatively small angle may be more likely to produce conditions favorable to efficient guidance. A critical next step is to evaluate the behaviour of migratory fish as

Guided labworks

DEFF Research Database (Denmark)

Jacobsen, Lærke Bang

For the last 40 years physics education research has shown poor learning outcomes of guided labs. Still this is found to be a very used teaching method in the upper secodary schools. This study explains the teacher's choice of guided labs throught the concept of redesign as obstacle dislodgement...

Algorithms for testing of fractional dynamics: a practical guide to ARFIMA modelling

International Nuclear Information System (INIS)

Burnecki, Krzysztof; Weron, Aleksander

2014-01-01

In this survey paper we present a systematic methodology which demonstrates how to identify the origins of fractional dynamics. We consider three mechanisms which lead to it, namely fractional Brownian motion, fractional Lévy stable motion and an autoregressive fractionally integrated moving average (ARFIMA) process but we concentrate on the ARFIMA modelling. The methodology is based on statistical tools for identification and validation of the fractional dynamics, in particular on an ARFIMA parameter estimator, an ergodicity test, a self-similarity index estimator based on sample p-variation and a memory parameter estimator based on sample mean-squared displacement. A complete list of algorithms needed for this is provided in appendices A–F. Finally, we illustrate the methodology on various empirical data and show that ARFIMA can be considered as a universal model for fractional dynamics. Thus, we provide a practical guide for experimentalists on how to efficiently use ARFIMA modelling for a large class of anomalous diffusion data. (paper)

Signal characteristics of guided wave for condenser tube of NPP

International Nuclear Information System (INIS)

Min, Lee Dong; Hoon, Choi Sang; Yeong, Yang Tae

2012-01-01

A Condenser is a large heat exchanger of the shell and tube type. Cooling water enters through the water box, through the tubesheet and into the tubes(about 80,000 tubes/unit). The shell side of the condenser receives steam from the low pressure turbines exhaust. The steam is cooled to a liquid by passing over the tubes where the cooling water is circulated. Because seawater is used as a coolant, condenser tubes are easily damaged. For such a reason, nondestructive testing conducted periodically. But nondestructive testing takes a lot of manpower and time. Guided wave technique can overcome these shortcomings. In this study, we made an effort evaluating a guided wave defect signal

Gaze strategies during visually-guided versus memory-guided grasping.

Science.gov (United States)

Prime, Steven L; Marotta, Jonathan J

2013-03-01

Vision plays a crucial role in guiding motor actions. But sometimes we cannot use vision and must rely on our memory to guide action-e.g. remembering where we placed our eyeglasses on the bedside table when reaching for them with the lights off. Recent studies show subjects look towards the index finger grasp position during visually-guided precision grasping. But, where do people look during memory-guided grasping? Here, we explored the gaze behaviour of subjects as they grasped a centrally placed symmetrical block under open- and closed-loop conditions. In Experiment 1, subjects performed grasps in either a visually-guided task or memory-guided task. The results show that during visually-guided grasping, gaze was first directed towards the index finger's grasp point on the block, suggesting gaze targets future grasp points during the planning of the grasp. Gaze during memory-guided grasping was aimed closer to the blocks' centre of mass from block presentation to the completion of the grasp. In Experiment 2, subjects performed an 'immediate grasping' task in which vision of the block was removed immediately at the onset of the reach. Similar to the visually-guided results from Experiment 1, gaze was primarily directed towards the index finger location. These results support the 2-stream theory of vision in that motor planning with visual feedback at the onset of the movement is driven primarily by real-time visuomotor computations of the dorsal stream, whereas grasping remembered objects without visual feedback is driven primarily by the perceptual memory representations mediated by the ventral stream.

Bioassay-guided studies on the cytotoxic and in vitro trypanocidal ...

African Journals Online (AJOL)

This paper reports a bioassay-guided study to search for possible biological activity (cytotoxic and trypanocidal) in two Ugandan medicinal plants. The methodology adopted was the so-called ping-pong approach, involving phytochemical purification (column chromatography and preparative thin layer chromatography), ...

Undergraduate surgical nursing preparation and guided operating room experience: A quantitative analysis.

Science.gov (United States)

Foran, Paula

2016-01-01

The aim of this research was to determine if guided operating theatre experience in the undergraduate nursing curricula enhanced surgical knowledge and understanding of nursing care provided outside this specialist area in the pre- and post-operative surgical wards. Using quantitative analyses, undergraduate nurses were knowledge tested on areas of pre- and post-operative surgical nursing in their final semester of study. As much learning occurs in nurses' first year of practice, participants were re-tested again after their Graduate Nurse Program/Preceptorship year. Participants' results were compared to the model of operating room education they had participated in to determine if there was a relationship between the type of theatre education they experienced (if any) and their knowledge of surgical ward nursing. Findings revealed undergraduates nurses receiving guided operating theatre experience had a 76% pass rate compared to 56% with non-guided or no experience (p nurses achieved a 100% pass rate compared to 53% with non-guided or no experience (p research informs us that undergraduate nurses achieve greater learning about surgical ward nursing via guided operating room experience as opposed to surgical ward nursing experience alone. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Use of Enhanced Guided Notes in an Electric Circuit Class: An Exploratory Study

Science.gov (United States)

Lawanto, O.

2012-01-01

This study was conducted to evaluate students' (n=70) learning performance after their participation in lectures using enhanced guided notes (EGN) in an electric circuits course for non-electrical engineering students. Unlike traditional guided notes, EGN include questions that prompt students to evaluate their metacognitive knowledge. The results…

Study of DSA-guided percutaneous puncture location of foramen oval

International Nuclear Information System (INIS)

Zhao Xiaojun; He Jiawei; Bai Guanghui; Shi Jianjing; Xu Chongyong; Zhan Gonghao

2008-01-01

Objective: To study the technique of digital substraction angiography (DSA)-guided percutaneous puncture location of foramen oval. Methods: 39 cases of trigeminal neuralgia were included in the study from Feb. 2004 to Oct. 2006. The patients were punctured by the amending anterior position. The f0ramen oval was displayed by moving the tube tilted 20-28 degree to the caudal and 16-23 degree to the healthy side. The direction and depth of the needles was determined on the lateral view. Then, radio-frequency thermocoagulation therapy was performed. Results: The needles were located in oval foramen in all the patients. Pain disappeared in 36 cases, alleviated in other cases, and no serious complication occurred during therapy. Conclusions: Oval foramen locations by DSA can improve the successful rate of operation. The foramen oval can be clearly displayed by DSA-guided in amending position, with comfortable position for patients. (authors)

A Study of Applying Digital Mobile Museum Guide

Directory of Open Access Journals (Sweden)

Chao-yun Chaucer Liang

2003-09-01

Full Text Available With the prosperous development of information technology, museums begin to apply new technology to enhance operation and communication efficiency. One of the information technology. Personal Digital Mobile, featuring light weight and mobility, can help museum to set up an interactive navigation system, which offering capability of user-controlled guidance and both broad and depth information. In this study, literature related to museum tour guide, digital mobile navigation, and multimedia interaction design were reviewed, and two examples were offered for reference. The first one example is Exploratorium in American, which is cooperated with HP labs to integrate wireless networking and PDA devices. The domestic example is the design project of the Personal Digital Mobile Guide for the Emperor Ch’ien-lung’s Grand Cultural Enterprise Exhibition in National Palace Museum, 2002. This paper introduces the techniques involved, interactive storyboard, interface design, color planning, electronic element planning, etc. The process of applying theory into creative project may help future researches in the related areas.[Article content in Chinese

An Assessment of the Effectiveness of Teacher Study Guides Used in Conjunction with Educational Television Lessons.

Science.gov (United States)

Gross, Lynne Schafer

One of three different types of study guide materials was given to teachers whose classes watched televised music lessons. One guide provided a description of the program content, suggested activities to be performed before and after the program, and other supplementary material; a second guide provided only a description of the program content;…

The Florida State Initial Teacher Certification Test: A Case Study.

Science.gov (United States)

Dorn, Charles M.

1989-01-01

Describes the development of the art certification examination which was designed for the Florida State Initial Teacher Certification Test. Discusses problems of subjectivity, content, and question format. Suggests criteria which can guide the development of viable college art education programs that can adequately prepare teachers in the areas of…

[Initial study of transthoracic echocardiography guided three-dimensional printing on the application of assessment of structural heart disease].

Science.gov (United States)

Zhu, Y B; Liu, J S; Wang, L Q; Guan, X; Luo, Y J; Geng, J; Geng, Q G; Lin, Y J; Zhang, L X; Li, X X; Lu, Y P

2017-08-01

Objective: To investigate the feasibility and diagnostic value of preoperative transthoracic echocardiography guided three dimensional printing model (TTE Guided 3DPM) on the assessment of structural heart disease (SHD). Methods: From February 2016 to October 2016, 44 patients underwent cardiac surgery in Tianjin Chest Hospital, forty-four patients were assessed preoperatively using TTE Guided 3DPM, including 25 males and 19 females, aged 3-75 years, with an average of (44±22) years. compared to conventional three dimensional transthoracic echocardiography (3D-TTE), and took direct intraoperative findings as "Golden Standard" simultaneously. There are twelve patients with SHD, including four cases with mitral prolapse, two cases with partial endocardial cushion defect, two cases with secondary atrial septal defect, two cases with rheumatic mitral stenosis, one case with tetralogy of Fallot, one case with ventricular septal defect (VSD), thirty-two patients without SHD were designed as negative control. Results: The sensitivity and specificity of TTE Guided 3DPM were greater than or equal to 3D-TTE, P value of McNemar test of 3D-TTE was greater than 0.05, the difference was not statistically significant, kappa =0.745, P Guided 3DPM was greater than 0.05, the difference was not statistically significant, kappa =0.955, P Guided 3DPM and gold standards were consistent. Compared with 3D-TTE and TTE Guided 3DPM, P value was greater than 0.05, the difference was not statistically significant, kappa =0.879, P Guided 3DPM were consistent. TTE Guided 3DPM displayed the three-dimensional structure of SHD cardiac lesions clearly, which were consistent with intraoperative findings. Conclusion: TTE Guided 3DPM provides essential information for the preoperative evaluation and decision of SHD.

OCR(A) A2 Physics Student Unit Guide

CERN Document Server

Chadha, Gurinder

2009-01-01

Student Unit Guides are perfect for revision. Each guide is written by an examiner and explains the unit requirements, summarises the relevant unit content and includes a series of specimen questions and answers. There are three sections to each guide:. Introduction - includes advice on how to use the guide, an explanation of the skills being tested by the assessment objectives, an outline of the unit or module and, depending on the unit, suggestions for how to revise effectively and prepare for the examination questions. Content Guidance - provides an examiner's overview of the module's key t

CCNA Cisco Certified Network Associate Study Guide: Exam 640-801

CERN Document Server

Lammle, Todd

2006-01-01

Here's the book you need to prepare for Cisco's revised CCNA exam, 640-801. This new edition of the best-selling CCNA Study Guide provides in-depth coverage of every CCNA exam objective, practical information on Cisco internetworking solutions and hundreds of challenging review questions.

Feasibility study of a hand guided robotic drill for cochleostomy.

Science.gov (United States)

Brett, Peter; Du, Xinli; Zoka-Assadi, Masoud; Coulson, Chris; Reid, Andrew; Proops, David

2014-01-01

The concept of a hand guided robotic drill has been inspired by an automated, arm supported robotic drill recently applied in clinical practice to produce cochleostomies without penetrating the endosteum ready for inserting cochlear electrodes. The smart tactile sensing scheme within the drill enables precise control of the state of interaction between tissues and tools in real-time. This paper reports development studies of the hand guided robotic drill where the same consistent outcomes, augmentation of surgeon control and skill, and similar reduction of induced disturbances on the hearing organ are achieved. The device operates with differing presentation of tissues resulting from variation in anatomy and demonstrates the ability to control or avoid penetration of tissue layers as required and to respond to intended rather than involuntary motion of the surgeon operator. The advantage of hand guided over an arm supported system is that it offers flexibility in adjusting the drilling trajectory. This can be important to initiate cutting on a hard convex tissue surface without slipping and then to proceed on the desired trajectory after cutting has commenced. The results for trials on phantoms show that drill unit compliance is an important factor in the design.

Systematic methodological review: developing a framework for a qualitative semi-structured interview guide.

Science.gov (United States)

Kallio, Hanna; Pietilä, Anna-Maija; Johnson, Martin; Kangasniemi, Mari

2016-12-01

To produce a framework for the development of a qualitative semi-structured interview guide. Rigorous data collection procedures fundamentally influence the results of studies. The semi-structured interview is a common data collection method, but methodological research on the development of a semi-structured interview guide is sparse. Systematic methodological review. We searched PubMed, CINAHL, Scopus and Web of Science for methodological papers on semi-structured interview guides from October 2004-September 2014. Having examined 2,703 titles and abstracts and 21 full texts, we finally selected 10 papers. We analysed the data using the qualitative content analysis method. Our analysis resulted in new synthesized knowledge on the development of a semi-structured interview guide, including five phases: (1) identifying the prerequisites for using semi-structured interviews; (2) retrieving and using previous knowledge; (3) formulating the preliminary semi-structured interview guide; (4) pilot testing the guide; and (5) presenting the complete semi-structured interview guide. Rigorous development of a qualitative semi-structured interview guide contributes to the objectivity and trustworthiness of studies and makes the results more plausible. Researchers should consider using this five-step process to develop a semi-structured interview guide and justify the decisions made during it. © 2016 John Wiley & Sons Ltd.

Fluid-structure coupling in the guide vanes cascade of a pump-turbine scale model

International Nuclear Information System (INIS)

Roth, S; Hasmatuchi, V; Botero, F; Farhat, M; Avellan, F

2010-01-01

The present study concerns fluid-structure coupling phenomena occurring in a guide vane cascade of a pump-turbine scale model placed in the EPFL PF3 test rig. An advanced instrument set is used to monitor both vibrating structures and the surrounding flow. The paper highlights the interaction between vibrating guide vanes and the flow behavior. The pressure fluctuations in the stay vanes region are found to be strongly influenced by the amplitude of the vibrating guide vanes. Moreover, the flow induces different hydrodynamic damping on the vibrating guide vanes depending on the operating point of the pump-turbine.

Fluid-structure coupling in the guide vanes cascade of a pump-turbine scale model

Science.gov (United States)

Roth, S.; Hasmatuchi, V.; Botero, F.; Farhat, M.; Avellan, F.

2010-08-01

The present study concerns fluid-structure coupling phenomena occurring in a guide vane cascade of a pump-turbine scale model placed in the EPFL PF3 test rig. An advanced instrument set is used to monitor both vibrating structures and the surrounding flow. The paper highlights the interaction between vibrating guide vanes and the flow behavior. The pressure fluctuations in the stay vanes region are found to be strongly influenced by the amplitude of the vibrating guide vanes. Moreover, the flow induces different hydrodynamic damping on the vibrating guide vanes depending on the operating point of the pump-turbine.

Mixed Methods Not Mixed Messages: Improving LibGuides with Student Usability Data

Directory of Open Access Journals (Sweden)

Nora Almeida

2017-12-01

Full Text Available Abstract Objective – This article describes a mixed methods usability study of research guides created using the LibGuides 2.0 platform conducted in 2016 at an urban, public university library. The goal of the study was to translate user design and learning modality preferences into executable design principles, and ultimately to improve the design and usage of LibGuides at the New York City College of Technology Library. Methods – User-centred design demands that stakeholders participate in each stage of an application’s development and that assumptions about user design preferences are validated through testing. Methods used for this usability study include: a task analysis on paper prototypes with a think aloud protocol (TAP, an advanced scribbling technique modeled on the work of Linek and Tochtermann (2015, and semi-structured interviews. The authors introduce specifics of each protocol in addition to data collection and analysis methods. Results – The authors present quantitative and qualitative student feedback on navigation layouts, terminology, and design elements and discuss concrete institutional and technical measures they will take to implement best practices. Additionally, the authors discuss students’ impressions of multimedia, text-based, and interactive instructional content in relation to specific research scenarios defined during the usability test. Conclusion – The authors translate study findings into best practices that can be incorporated into custom user-centric LibGuide templates and assets. The authors also discuss relevant correlations between students’ learning modality preferences and design feedback, and identify several areas that warrant further research. The authors believe this study will spark a larger discussion about relationships between instructional design, learning modalities, and research guide use contexts.

Study on the installation of the evacuation guide signs in a nuclear power plant

International Nuclear Information System (INIS)

Matsui, Yuko; Hamasaki, Kenichi; Ohuchi, Hiroko; Akagi, Shigefumi;; Sato, Takeyoshi

2005-01-01

In order to study the desirable sign system that leads people to the proper evacuation behavior in the nuclear plant, an experiment was conducted by using 3D simulation of a part of the nuclear buildings. As the condition of the experiment, 3 different simulations on the type of guide signs and the height of installation were provided. Participants in the experiment were asked: to reach the emergency exit as quickly as possible in case of the imaginary fire, to report the signs utilized for finding the way during his evacuation, and to evaluate their comprehensibility to evaluate synthetically each installation and guide sings from the view point of comprehensibility. Synthetic evaluation was highly rated when we indicated the signs on the face of the floor additionally and installed the guide signs at a height of 1000mm above the floor. For the individual guide sign, it tended to evaluate mostly comprehensible that the pathway guide sign was installed at 1,000mm above the floor, though it did not reach a statistical significant level. Furthermore, the necessity was suggested to take into consideration on the spatial relationship between a moving person and the guide signs. (author)

The evaluation of the role of ultrasonography and ultrasound-guided aspiration as an initial screening test in blunt abdominal trauma

International Nuclear Information System (INIS)

Abdullah, Hassan D.I.; Dar, Manzoor A.; Shukla, A.K.

1996-01-01

The role of ultrasonography (US) as an initial screening test was evaluated in 3000 consecutive cases of blunt abdominal trauma (BAT). Seventy-three were positive for free fluid collection or organ injury. US-guided aspiration was used to rule out the hollow visceral injury in those referred to nonsurgical therapy. Sixty patients underwent laparotomy. These included 53 clinically unstable patients, three stable patients with positive US-guided aspiration for bile or intestinal contents and four who deteriorated upon conservative treatment. The remaining patients with US negative for fluid had some evidence of abdominal injury on clinical examination. Ultrasonoraphy complemented the clinical examination. Both the sensitivity and specificity of US for the detection of free fluid were 100%. The overall sensitivity was 92% in spleen injuries, 88% in liver injuries and 100% in kidney injuries, with positive predictive value of 96%, 100% and 100% and a specificity of 97%, 100% and 100% respectively. Retrospective correlation of US with laparotomy findings regarding free fluid showed that 50-100 mL of free fluid was minimal, 100-500 mL significant. Thirteen patients completed conservative treatment with an uneventful course in hospital. Both the US findings and the clinical condition of the patient should be considered in decision-making in BAT. Unnecessary laparotomies can be avoided when the major bleeding site is not in the abdomen and such patients can be safely observed after excluding the hollow visceral injury by US-guided aspiration. US, being rapid to perform, sensitive and easily repeatable, is quite useful as an initial screening test in BAT patients. (author)

Understanding students' concepts through guided inquiry learning and free modified inquiry on static fluid material

OpenAIRE

Sularso Sularso; Widha Sunarno; Sarwanto Sarwanto

2017-01-01

This study provides information on understanding students' concepts in guided inquiry learning groups and in free modified inquiry learning groups. Understanding of student concept is reviewed on the concept of static fluid case. The number of samples tested were 67 students. The sample is divided into 2 groups of students: the group is given guided inquiry learning and the group given the modified free inquiry learning. Understanding the concept of students is measured through 23 tests of it...

Teachers Guide to Social Studies in the Senior High School.

Science.gov (United States)

Cason, Constance; And Others

This guide to the social studies was developed for use in the senior high schools of Duval County, Jacksonville, Florida. Topics covered are United States government, United States history, anthropology, bible history, comparative institutions, European history, Florida history, human relations, political science, economics, psychology, sociology,…

CISA Certified Information Systems Auditor : study guide

CERN Document Server

Cannon, David L

2011-01-01

The industry-leading study guide for the CISA exam, fully updated. More than 27,000 IT professionals take the Certified Information Systems Auditor exam each year. SC Magazine lists the CISA as the top certification for security professionals. Compliances, regulations, and best practices for IS auditing are updated twice a year, and this is the most up-to-date book available to prepare aspiring CISAs for the next exam.: CISAs are among the five highest-paid IT security professionals; more than 27,000 take the exam each year and the numbers are growing; Standards are updated twice a year, and t

A randomized controlled pilot study feasibility of a tablet-based guided audio-visual relaxation intervention for reducing stress and pain in adults with sickle cell disease.

Science.gov (United States)

Ezenwa, Miriam O; Yao, Yingwei; Engeland, Christopher G; Molokie, Robert E; Wang, Zaijie Jim; Suarez, Marie L; Wilkie, Diana J

2016-06-01

To test feasibility of a guided audio-visual relaxation intervention protocol for reducing stress and pain in adults with sickle cell disease. Sickle cell pain is inadequately controlled using opioids, necessitating further intervention such as guided relaxation to reduce stress and pain. Attention-control, randomized clinical feasibility pilot study with repeated measures. Randomized to guided relaxation or control groups, all patients recruited between 2013-2014 during clinical visits, completed stress and pain measures via a Galaxy Internet-enabled Android tablet at the Baseline visit (pre/post intervention), 2-week posttest visit and also daily at home between the two visits. Experimental group patients were asked to use a guided relaxation intervention at the Baseline visit and at least once daily for 2 weeks. Control group patients engaged in a recorded sickle cell discussion at the Baseline visit. Data were analysed using linear regression with bootstrapping. At baseline, 27/28 of consented patients completed the study protocol. Group comparison showed that guided relaxation significantly reduced current stress and pain. At the 2-week posttest, 24/27 of patients completed the study, all of whom reported liking the study. Patients completed tablet-based measures on 71% of study days (69% in control group, 72% in experiment group). At the 2-week posttest, the experimental group had significantly lower composite pain index scores, but the two groups did not differ significantly on stress intensity. This study protocol appears feasible. The tablet-based guided relaxation intervention shows promise for reducing sickle cell pain and warrants a larger efficacy trial. The ClinicalTrials.gov Identifier is: NCT02501447. © 2016 John Wiley & Sons Ltd.

A step-by-step guide to systematically identify all relevant animal studies

Science.gov (United States)

Leenaars, Marlies; Hooijmans, Carlijn R; van Veggel, Nieky; ter Riet, Gerben; Leeflang, Mariska; Hooft, Lotty; van der Wilt, Gert Jan; Tillema, Alice; Ritskes-Hoitinga, Merel

2012-01-01

Before starting a new animal experiment, thorough analysis of previously performed experiments is essential from a scientific as well as from an ethical point of view. The method that is most suitable to carry out such a thorough analysis of the literature is a systematic review (SR). An essential first step in an SR is to search and find all potentially relevant studies. It is important to include all available evidence in an SR to minimize bias and reduce hampered interpretation of experimental outcomes. Despite the recent development of search filters to find animal studies in PubMed and EMBASE, searching for all available animal studies remains a challenge. Available guidelines from the clinical field cannot be copied directly to the situation within animal research, and although there are plenty of books and courses on searching the literature, there is no compact guide available to search and find relevant animal studies. Therefore, in order to facilitate a structured, thorough and transparent search for animal studies (in both preclinical and fundamental science), an easy-to-use, step-by-step guide was prepared and optimized using feedback from scientists in the field of animal experimentation. The step-by-step guide will assist scientists in performing a comprehensive literature search and, consequently, improve the scientific quality of the resulting review and prevent unnecessary animal use in the future. PMID:22037056

Guiding Design: Exposing Librarian and Student Mental Models of Research Guides

Science.gov (United States)

Sinkinson, Caroline; Alexander, Stephanie; Hicks, Alison; Kahn, Meredith

2012-01-01

This article details an open card sort study administered to undergraduate students, graduate students, and librarians at the University of Colorado at Boulder in order to reveal perceptions of library research guides. The study identifies user group preferences for organization and content of research guides, as well as themes emerging from the…

A Study on the Performance of the Split Reaction Water Turbine with Guide Ribs

Science.gov (United States)

Allen, Deuel H.; Villanueva, Eliseo P.

2015-09-01

The development of technologies that make use of renewable energy is of great significance presently. A new kind of turbine called Split Reaction Water Turbine (SRWT) using PVC pipes as material is a major contribution towards harnessing the energy potentials of small stream low head water resources. SRWTs of diameter to height ratio (D/H = 110 cm/160 cm) were tested at the MSU-IIT College of Engineering Fluid Engineering Laboratory. Data on volumetric flow and pressure head at the turbine inlet of the SRWT were recorded using National Instrument Data Processing System using LabView software. In later experiments, guide ribs were installed at the vane of the exit nozzles in order to determine the difference in the performance of the ribbed and the non-ribbed SRWT. Simulations of the running SRWT were conducted using SOLIDWORKS software. Results of the simulations aided in the thorough analyses of the data from the experimental runs. A comparison of data from the ribbed and non-ribbed SRWT shows that guide ribs were effective in directing the momentum of the exiting water to improve the speed of rotation. In this study, the increase in the speed of the Split Reaction Water Turbine was as much as 46%.

Osseointegration of subperiosteal implant via guided tissue regeneration. A pilot study

DEFF Research Database (Denmark)

Hjørting-Hansen, E; Helbo, M; Aaboe, M

1995-01-01

The principle of guided tissue regeneration was applied in an attempt to generate bone to cover a subperiosteal implant. Titanium frame works, casted on individual impressions of the anterior surface of the tibia of 4 Copenhagen White rabbits, were stabilized to the tibia by microscrews, and half...... of them were covered by an expanded polytetrafluoroethylene augmentation membrane. The observation period was 12 weeks. Guided bone regeneration partly covering the implants was seen at all experimental sides; on the control sides the implants were mainly embedded in fibrous tissue. Studies...... are in progress with the aim of reducing marked marrow space formation observed in all the regenerated areas....

Youth and Violent Conflict. Study Guide for Teachers and Students

Science.gov (United States)

United States Institute of Peace, 2006

2006-01-01

The objectives of this study guide are: (1) to increase student understanding of the prevalence of youth participation in violent conflict and the challenges to addressing this global issue; (2) to familiarize students with strategies for conflict prevention, management, and resolution; (3) to develop students' analytical reading, writing, and…

Cultural Differences in Values as Self-Guides.

Science.gov (United States)

Cheung, Wing-Yee; Maio, Gregory R; Rees, Kerry J; Kamble, Shanmukh; Mane, Sangeetha

2016-06-01

Three studies tested whether individualism-collectivism moderates the extent to which values are endorsed as ideal self-guides and ought self-guides, and the consequences for regulatory focus and emotion. Across Studies 1 and 2, individualists endorsed values that are relatively central to the self as stronger ideals than oughts, whereas collectivists endorsed them as ideals and oughts to a similar degree. Study 2 found that individualists justified central values using reasons that were more promotion focused than prevention focused, whereas collectivists used similar amount of prevention-focused and promotion-focused reasons. In Study 3, individualists felt more dejected after violating a central (vs. peripheral) value and more agitated after violating a peripheral (vs. central) value. Collectivists felt a similar amount of dejection regardless of values centrality and more agitation after violating central (vs. peripheral) values. Overall, culture has important implications for how we regulate values that are central or peripheral to our self-concept. © 2016 by the Society for Personality and Social Psychology, Inc.

Wild bees preferentially visit Rudbeckia flower heads with exaggerated ultraviolet absorbing floral guides.

Science.gov (United States)

Horth, Lisa; Campbell, Laura; Bray, Rebecca

2014-03-15

Here, we report on the results of an experimental study that assessed the visitation frequency of wild bees to conspecific flowers with different sized floral guides. UV absorbent floral guides are ubiquitous in Angiosperms, yet surprisingly little is known about conspecific variation in these guides and very few studies have evaluated pollinator response to UV guide manipulation. This is true despite our rich understanding about learning and color preferences in bees. Historical dogma indicates that flower color serves as an important long-range visual signal allowing pollinators to detect the flowers, while floral guides function as close-range signals that direct pollinators to a reward. We initiated the work presented here by first assessing the population level variation in UV absorbent floral guides for conspecific flowers. We assessed two species, Rudbeckia hirta and R. fulgida. We then used several petal cut-and-paste experiments to test whether UV floral guides can also function to attract visitors. We manipulated floral guide size and evaluated visitation frequency. In all experiments, pollinator visitation rates were clearly associated with floral guide size. Diminished floral guides recruited relatively few insect visitors. Exaggerated floral guides recruited more visitors than smaller or average sized guides. Thus, UV floral guides play an important role in pollinator recruitment and in determining the relative attractiveness of conspecific flower heads. Consideration of floral guides is therefore important when evaluating the overall conspicuousness of flower heads relative to background coloration. This work raises the issue of whether floral guides serve as honest indicators of reward, since guide size varies in nature for conspecific flowers at the same developmental stage and since preferences for larger guides were found. To our knowledge, these are the first cut-and-paste experiments conducted to examine whether UV absorbent floral guides affect

Wild bees preferentially visit Rudbeckia flower heads with exaggerated ultraviolet absorbing floral guides

Directory of Open Access Journals (Sweden)

Lisa Horth

2014-07-01

Full Text Available Here, we report on the results of an experimental study that assessed the visitation frequency of wild bees to conspecific flowers with different sized floral guides. UV absorbent floral guides are ubiquitous in Angiosperms, yet surprisingly little is known about conspecific variation in these guides and very few studies have evaluated pollinator response to UV guide manipulation. This is true despite our rich understanding about learning and color preferences in bees. Historical dogma indicates that flower color serves as an important long-range visual signal allowing pollinators to detect the flowers, while floral guides function as close-range signals that direct pollinators to a reward. We initiated the work presented here by first assessing the population level variation in UV absorbent floral guides for conspecific flowers. We assessed two species, Rudbeckia hirta and R. fulgida. We then used several petal cut-and-paste experiments to test whether UV floral guides can also function to attract visitors. We manipulated floral guide size and evaluated visitation frequency. In all experiments, pollinator visitation rates were clearly associated with floral guide size. Diminished floral guides recruited relatively few insect visitors. Exaggerated floral guides recruited more visitors than smaller or average sized guides. Thus, UV floral guides play an important role in pollinator recruitment and in determining the relative attractiveness of conspecific flower heads. Consideration of floral guides is therefore important when evaluating the overall conspicuousness of flower heads relative to background coloration. This work raises the issue of whether floral guides serve as honest indicators of reward, since guide size varies in nature for conspecific flowers at the same developmental stage and since preferences for larger guides were found. To our knowledge, these are the first cut-and-paste experiments conducted to examine whether UV absorbent

Creating Your Own Case Studies: A Guide for Early Field Experience.

Science.gov (United States)

Florio-Ruane, Susan

1990-01-01

A guide for creating case studies is provided for teacher educators to share with students. Suggestions are offered for becoming a participant observer in a classroom. The appendix contains sample appropriate and inappropriate field notes. (SM)

Split-mouth comparison of the accuracy of computer-generated and conventional surgical guides.

Science.gov (United States)

Farley, Nathaniel E; Kennedy, Kelly; McGlumphy, Edwin A; Clelland, Nancy L

2013-01-01

Recent clinical studies have shown that implant placement is highly predictable with computer-generated surgical guides; however, the reliability of these guides has not been compared to that of conventional guides clinically. This study aimed to compare the accuracy of reproducing planned implant positions with computer-generated and conventional surgical guides using a split-mouth design. Ten patients received two implants each in symmetric locations. All implants were planned virtually using a software program and information from cone beam computed tomographic scans taken with scan appliances in place. Patients were randomly selected for computer-aided design/computer-assisted manufacture (CAD/CAM)-guided implant placement on their right or left side. Conventional guides were used on the contralateral side. Patients underwent operative cone beam computed tomography postoperatively. Planned and actual implant positions were compared using three-dimensional analyses capable of measuring volume overlap as well as differences in angles and coronal and apical positions. Results were compared using a mixed-model repeated-measures analysis of variance and were further analyzed using a Bartlett test for unequal variance (α = .05). Implants placed with CAD/CAM guides were closer to the planned positions in all eight categories examined. However, statistically significant differences were shown only for coronal horizontal distances. It was also shown that CAD/CAM guides had less variability than conventional guides, which was statistically significant for apical distance. Implants placed using CAD/CAM surgical guides provided greater accuracy in a lateral direction than conventional guides. In addition, CAD/CAM guides were more consistent in their deviation from the planned locations than conventional guides.

Pueblo Indian Watercolors: Learning by Looking. A Study Guide.

Science.gov (United States)

Connors, Andrew

This guide presents a brief history of the Pueblo Indians of the Southwest, their traditions, and their art. Focus is on painting, a traditional art form that continues to be practiced, and on ceremonies and beliefs that are important elements of contemporary Pueblo society. The guide is designed for students of ages 10 through 14, but can be…

Study on guided-mode resonance characteristic of multilayer dielectric grating with broadband and wide using-angle

International Nuclear Information System (INIS)

Jian-Peng, Wang; Yun-Xia, Jin; Jian-Yong, Ma; Jian-Da, Shao; Zheng-Xiu, Fan

2010-01-01

Guided-mode resonance in a diffraction band of multilayer dielectric gratings may lead to a catastrophic result in laser system, especially in the ultrashort pulse laser system, so the inhibition of guided-mode resonance is very important. In this paper the characteristics of guided-mode resonance in multilayer dielectric grating are studied with the aim of better understanding the physical process of guided-mode resonance and designing a broadband multilayer dielectric grating with no guided-mode resonance. By employing waveguide theory, all guided-wave modes appearing in multilayer dielectric grating are found, and the incident conditions, separately, corresponding to each guided-wave mode are also obtained. The electric field enhancement in multilayer dielectric grating is shown obviously. Furthermore, from the detailed analyses on the guided-mode resonance conditions, it is found that the reduction of the grating period would effectively avoid the appearing of guided-mode resonance. And the expressions for calculating maximum periods, which ensure that no guided-mode resonance occurs in the requiring broad angle or wavelength range, are first reported. The above results calculated by waveguide theory and Fourier mode method are compared with each other, and they are coincident completely. Moreover, the method that relies on waveguide theory is more helpful for understanding the guided-mode resonance excited process and analyzing how each parameter affects the characteristic of guided-mode resonance. Therefore, the effects of multilayer dielectric grating parameters, such as period, fill factor, thickness of grating layer, et al., on the guided-mode resonance characteristic are discussed in detail based on waveguide theory, and some meaningful results are obtained. (classical areas of phenomenology)

Development of Animal Physiology Practical Guidance Oriented Guided Inquiry for Student of Biology Department

Science.gov (United States)

Putra, Z. A. Z.; Sumarmin, R.; Violita, V.

2018-04-01

The guides used for practicing animal physiology need to be revised and adapted to the lecture material. This is because in the subject of Animal Physiology. The guidance of animal physiology practitioners is still conventional with prescription model instructions and is so simple that it is necessary to develop a practical guide that can lead to the development of scientific work. One of which is through practice guided inquiry guided practicum guide. This study aims to describe the process development of the practical guidance and reveal the validity, practicality, and effectiveness Guidance Physiology Animals guided inquiry inferior to the subject of Animal Physiology for students Biology Department State University of Padang. This type of research is development research. This development research uses the Plomp model. Stages performed are problem identification and analysis stage, prototype development and prototyping stage, and assessment phase. Data analysis using descriptive analysis. The instrument of data collection using validation and practical questionnaires, competence and affective field of competence observation and psychomotor and cognitive domain competence test. The result of this research shows that guidance of Inquiry Guided Initiative Guided Physiology with 3.23 valid category, practicality by lecturer with value 3.30 practical category, student with value 3.37 practical criterion. Affective effectiveness test with 93,00% criterion is very effective, psychomotor aspect 89,50% with very effective criteria and cognitive domain with value of 67, pass criterion. The conclusion of this research is Guided Inquiry Student Guided Protoxial Guidance For Students stated valid, practical and effective.

Systematic study of target localization for bioluminescence tomography guided radiation therapy

Science.gov (United States)

Yu, Jingjing; Zhang, Bin; Iordachita, Iulian I.; Reyes, Juvenal; Lu, Zhihao; Brock, Malcolm V.; Patterson, Michael S.; Wong, John W.

2016-01-01

Purpose: To overcome the limitation of CT/cone-beam CT (CBCT) in guiding radiation for soft tissue targets, the authors developed a spectrally resolved bioluminescence tomography (BLT) system for the small animal radiation research platform. The authors systematically assessed the performance of the BLT system in terms of target localization and the ability to resolve two neighboring sources in simulations, tissue-mimicking phantom, and in vivo environments. Methods: Multispectral measurements acquired in a single projection were used for the BLT reconstruction. The incomplete variables truncated conjugate gradient algorithm with an iterative permissible region shrinking strategy was employed as the optimization scheme to reconstruct source distributions. Simulation studies were conducted for single spherical sources with sizes from 0.5 to 3 mm radius at depth of 3–12 mm. The same configuration was also applied for the double source simulation with source separations varying from 3 to 9 mm. Experiments were performed in a standalone BLT/CBCT system. Two self-illuminated sources with 3 and 4.7 mm separations placed inside a tissue-mimicking phantom were chosen as the test cases. Live mice implanted with single-source at 6 and 9 mm depth, two sources at 3 and 5 mm separation at depth of 5 mm, or three sources in the abdomen were also used to illustrate the localization capability of the BLT system for multiple targets in vivo. Results: For simulation study, approximate 1 mm accuracy can be achieved at localizing center of mass (CoM) for single-source and grouped CoM for double source cases. For the case of 1.5 mm radius source, a common tumor size used in preclinical study, their simulation shows that for all the source separations considered, except for the 3 mm separation at 9 and 12 mm depth, the two neighboring sources can be resolved at depths from 3 to 12 mm. Phantom experiments illustrated that 2D bioluminescence imaging failed to distinguish two sources

Systematic study of target localization for bioluminescence tomography guided radiation therapy

Energy Technology Data Exchange (ETDEWEB)

Yu, Jingjing [Department of Radiation Oncology and Molecular Radiation Sciences, Johns Hopkins University, Baltimore, Maryland 21231 and School of Physics and Information Technology, Shaanxi Normal University, Shaanxi 710119 (China); Zhang, Bin; Reyes, Juvenal; Wong, John W.; Wang, Ken Kang-Hsin, E-mail: kwang27@jhmi.edu [Department of Radiation Oncology and Molecular Radiation Sciences, Johns Hopkins University, Baltimore, Maryland 21231 (United States); Iordachita, Iulian I. [Laboratory for Computational Sensing and Robotics, Johns Hopkins University, Baltimore, Maryland 21218 (United States); Lu, Zhihao [Department of Oncology and Department of Surgery, Johns Hopkins University, Baltimore, Maryland 21231 and Key laboratory of Carcinogenesis and Translational Research, Department of GI Oncology, Peking University, Beijing Cancer Hospital and Institute, Beijing 100142 (China); Brock, Malcolm V. [Department of Oncology and Department of Surgery, Johns Hopkins University, Baltimore, Maryland 21231 (United States); Patterson, Michael S. [Department of Medical Physics and Applied Radiation Sciences, McMaster University, Hamilton, Ontario L8S 4L8 (Canada)

2016-05-15

Purpose: To overcome the limitation of CT/cone-beam CT (CBCT) in guiding radiation for soft tissue targets, the authors developed a spectrally resolved bioluminescence tomography (BLT) system for the small animal radiation research platform. The authors systematically assessed the performance of the BLT system in terms of target localization and the ability to resolve two neighboring sources in simulations, tissue-mimicking phantom, and in vivo environments. Methods: Multispectral measurements acquired in a single projection were used for the BLT reconstruction. The incomplete variables truncated conjugate gradient algorithm with an iterative permissible region shrinking strategy was employed as the optimization scheme to reconstruct source distributions. Simulation studies were conducted for single spherical sources with sizes from 0.5 to 3 mm radius at depth of 3–12 mm. The same configuration was also applied for the double source simulation with source separations varying from 3 to 9 mm. Experiments were performed in a standalone BLT/CBCT system. Two self-illuminated sources with 3 and 4.7 mm separations placed inside a tissue-mimicking phantom were chosen as the test cases. Live mice implanted with single-source at 6 and 9 mm depth, two sources at 3 and 5 mm separation at depth of 5 mm, or three sources in the abdomen were also used to illustrate the localization capability of the BLT system for multiple targets in vivo. Results: For simulation study, approximate 1 mm accuracy can be achieved at localizing center of mass (CoM) for single-source and grouped CoM for double source cases. For the case of 1.5 mm radius source, a common tumor size used in preclinical study, their simulation shows that for all the source separations considered, except for the 3 mm separation at 9 and 12 mm depth, the two neighboring sources can be resolved at depths from 3 to 12 mm. Phantom experiments illustrated that 2D bioluminescence imaging failed to distinguish two sources

Control rod testing apparatus

International Nuclear Information System (INIS)

Gaunt, R.R.; Ashman, C.M.

1987-01-01

A control rod testing apparatus is described comprising: a first guide means having a vertical cylindrical opening for grossly guiding a control rod; a second guide means having a vertical cylindrical opening for grossly guiding a control rod. The first and second guide means are supported at axially spaced locations with the openings coaxial; and a substantially cylindrical subassembly having a vertical cylindrical opening therethrough. The subassembly is trapped coaxial with and between the first and second guide means, and the subassembly radially floats with respect to the first and second guide means

Study Design and Data Gathering Guide for Serious Games’ Evaluation

NARCIS (Netherlands)

Baalsrud Hauge, Jannicke; Boyle, Elizabeth; Mayer, Igor; Nadolski, Rob; Riedel, Johann C. K. H.; Moreno-Ger, Pablo; Bellotti, Francesco; Lim, Theodore; Ritchie, James

2013-01-01

Baalsrud Hauge, J., Boyle, E., Mayer, I., Nadolski, R. J., Riedel, J. C. K. H., Moreno-Ger, P., Bellotti, F., Lim, T., & Ritchie, J. (2013). Study Design and Data Gathering Guide for Serious Games’ Evaluation. In T. M. Connolly, T. Hainey, E. Boyle, G. Baxter, & P. Moreno-Ger (Eds.), Psychology,

"To Kill A Mockingbird": Then and Now--A 35th Anniversary Celebration. Teacher Study Guide.

Science.gov (United States)

National Council of Teachers of English, Urbana, IL.

This study guide offers a different approach, teleconferencing, to new information, ideas, and resources on the film, "To Kill a Mockingbird." Following general information on "then and now," the guide consists of sections entitled: Preparing to Teach TKM: Special Considerations (by Charles Suhor and Larry Bell); Historical…

Study of CT-guided percutaneous biopsy for the spine lesions

International Nuclear Information System (INIS)

Zhang Ji; Wu Chungen; Cheng Yongde; Zhu Xuee; Gu Yifeng; Zhang Huijian

2008-01-01

Objective: To determine the successful rate, diagnostic accuracy and clinical usefulness of CT-guided percutaneous biopsy for the spine lesions. Methods: Eight-five patients (61 outpatients, 24 ward patients)underwent CT-guided percutaneous biopsy for the spine lesion. The imaging appearance of spinal lesions were lytic in 57 cases, osteosclerotic in 19 cases, and mixed in 9 cases. Biopsy specimens were sent for cytologic and histologic analysis in order to correct diagnosis. Bacterial studies were performed when ever infection was suspected. Results: The localization of puncture biopsy needle inside the spinal lesions, was conformed by computed tomography including 3 cervical, 26 thoracic, 37 lumbar, and 19 sacral lesions. Biopsy specimens included bone (29 cases), soft tissue (5 cases), mixed tissue (47 cases )and no specimen be obtained(4 cases). An adequate specimen for pathologic examination was obtained in 81 biopsies (95%). The pathologic examinations revealed 44 metastases, 17 primary bone neoplasms, 18 infections (included tuberculosis)and 2 normal tissues of vertebral body. The diagnostic accuracy reached 97.5% (79 of 81 patients). Conclusions: CT-guided percutaneous biopsy is an important tool in the evaluation of spinal lesions, providing accurate localization, less trauma and reliable pathologic diagnosis and worthwhile to be the routine before vertebroplasy. (authors)

Feasibility Study of a Hand Guided Robotic Drill for Cochleostomy

Directory of Open Access Journals (Sweden)

Peter Brett

2014-01-01

Full Text Available The concept of a hand guided robotic drill has been inspired by an automated, arm supported robotic drill recently applied in clinical practice to produce cochleostomies without penetrating the endosteum ready for inserting cochlear electrodes. The smart tactile sensing scheme within the drill enables precise control of the state of interaction between tissues and tools in real-time. This paper reports development studies of the hand guided robotic drill where the same consistent outcomes, augmentation of surgeon control and skill, and similar reduction of induced disturbances on the hearing organ are achieved. The device operates with differing presentation of tissues resulting from variation in anatomy and demonstrates the ability to control or avoid penetration of tissue layers as required and to respond to intended rather than involuntary motion of the surgeon operator. The advantage of hand guided over an arm supported system is that it offers flexibility in adjusting the drilling trajectory. This can be important to initiate cutting on a hard convex tissue surface without slipping and then to proceed on the desired trajectory after cutting has commenced. The results for trials on phantoms show that drill unit compliance is an important factor in the design.

Safety study application guide

International Nuclear Information System (INIS)

1993-07-01

Martin Marietta Energy Systems, Inc., (Energy Systems) is committed to performing and documenting safety analyses for facilities it manages for the Department of Energy (DOE). Included are analyses of existing facilities done under the aegis of the Safety Analysis Report Upgrade Program, and analyses of new and modified facilities. A graded approach is used wherein the level of analysis and documentation for each facility is commensurate with the magnitude of the hazard(s), the complexity of the facility and the stage of the facility life cycle. Safety analysis reports (SARs) for hazard Category 1 and 2 facilities are usually detailed and extensive because these categories are associated with public health and safety risk. SARs for Category 3 are normally much less extensive because the risk to public health and safety is slight. At Energy Systems, safety studies are the name given to SARs for Category 3 (formerly open-quotes lowclose quotes) facilities. Safety studies are the appropriate instrument when on-site risks are limited to irreversible consequences to a few people, and off-site consequences are limited to reversible consequences to a few people. This application guide provides detailed instructions for performing safety studies that meet the requirements of DOE Orders 5480.22, open-quotes Technical Safety Requirements,close quotes and 5480.23, open-quotes Nuclear Safety Analysis Reports.close quotes A seven-chapter format has been adopted for safety studies. This format allows for discussion of all the items required by DOE Order 5480.23 and for the discussions to be readily traceable to the listing in the order. The chapter titles are: (1) Introduction and Summary, (2) Site, (3) Facility Description, (4) Safety Basis, (5) Hazardous Material Management, (6) Management, Organization, and Institutional Safety Provisions, and (7) Accident Analysis

Fully automated MRI-guided robotics for prostate brachytherapy

International Nuclear Information System (INIS)

Stoianovici, D.; Vigaru, B.; Petrisor, D.; Muntener, M.; Patriciu, A.; Song, D.

2008-01-01

The uncertainties encountered in the deployment of brachytherapy seeds are related to the commonly used ultrasound imager and the basic instrumentation used for the implant. An alternative solution is under development in which a fully automated robot is used to place the seeds according to the dosimetry plan under direct MRI-guidance. Incorporation of MRI-guidance creates potential for physiological and molecular image-guided therapies. Moreover, MRI-guided brachytherapy is also enabling for re-estimating dosimetry during the procedure, because with the MRI the seeds already implanted can be localised. An MRI compatible robot (MrBot) was developed. The robot is designed for transperineal percutaneous prostate interventions, and customised for fully automated MRI-guided brachytherapy. With different end-effectors, the robot applies to other image-guided interventions of the prostate. The robot is constructed of non-magnetic and dielectric materials and is electricity free using pneumatic actuation and optic sensing. A new motor (PneuStep) was purposely developed to set this robot in motion. The robot fits alongside the patient in closed-bore MRI scanners. It is able to stay fully operational during MR imaging without deteriorating the quality of the scan. In vitro, cadaver, and animal tests showed millimetre needle targeting accuracy, and very precise seed placement. The robot tested without any interference up to 7T. The robot is the first fully automated robot to function in MRI scanners. Its first application is MRI-guided seed brachytherapy. It is capable of automated, highly accurate needle placement. Extensive testing is in progress prior to clinical trials. Preliminary results show that the robot may become a useful image-guided intervention instrument. (author)

The effect of guided inquiry-based instruction in secondary science for students with learning disabilities

Science.gov (United States)

Eliot, Michael H.

Students with learning disabilities (SWLDs) need to attain academic rigor to graduate from high school and college, as well as achieve success in life. Constructivist theories suggest that guided inquiry may provide the impetus for their success, yet little research has been done to support this premise. This study was designed to fill that gap. This quasi-experimental study compared didactic and guided inquiry-based teaching of science concepts to secondary SWLDs in SDC science classes. The study examined 38 students in four classes at two diverse, urban high schools. Participants were taught two science concepts using both teaching methods and posttested after each using paper-and-pencil tests and performance tasks. Data were compared to determine increases in conceptual understanding by teaching method, order of teaching method, and exposure one or both teaching methods. A survey examined participants' perceived self-efficacy under each method. Also, qualitative comparison of the two test formats examined appropriate use with SWLDs. Results showed significantly higher scores after the guided inquiry method on concept of volume, suggesting that guided inquiry does improve conceptual understanding over didactic instruction in some cases. Didactic teaching followed by guided inquiry resulted in higher scores than the reverse order, indicating that SWLDs may require direct instruction in basic facts and procedures related to a topic prior to engaging in guided inquiry. Also application of both teaching methods resulted in significantly higher scores than a single method on the concept of density, suggesting that SWLDs may require more in depth instruction found using both methods. No differences in perceived self-efficacy were shown. Qualitative analysis both assessments and participants' behaviors during testing support the use of performance tasks over paper-and-pencil tests with SWLDs. Implications for education include the use of guided inquiry to increase SWLDs

Guided Internet-based cognitive behavioral therapy for mild and moderate depression: A benchmarking study

Directory of Open Access Journals (Sweden)

Hanne Jakobsen

2017-03-01

Full Text Available Major depression is among the most common and debilitating disorders worldwide, associated with large societal and individual costs. Effective treatments exist, but accessibility is scarce. Guided Internet-Based Cognitive Behavioral Therapy (guided iCBT is a promising approach to reach more people in need of help. In the present pilot study, we investigated the outcome of a guided iCBT program for mild and moderate depression when disseminated from Sweden to Norway. The guided iCBT intervention was implemented within a university-based outpatient clinic by six student therapists under supervision. Twenty-two participants with mild and moderate depression were included in the study. Large treatment effects were found for depressive symptoms, whereas small to medium effects were observed for anxiety symptoms. More than half (55% of the participants were classified as recovered at post-treatment and more than a third (41% at follow-up. No participants had a significant deterioration from pre- to post-treatment, but two reported a significant deterioration from post-treatment to 6-month follow-up. Benchmarking the present results against those reported in the four original Swedish studies, we found that the treatment effect in the Norwegian study was slightly higher at post-treatment and slightly lower at 6-month follow-up compared to the outcome in the Swedish studies. The results should be interpreted with caution, as our sample was small and had no control group.

Feasibility study of the thermo-siphon mock-up test

International Nuclear Information System (INIS)

Choi, Jung Woon; Kim, Young Jin; Lee, Kye Hong; Kim, Young Ki; Jeong, Sang Kwon

2004-09-01

Described is the feasibility of the thermo-siphon mock-up test for the HANARO-CNS facility. The purposes of the mock-up tests are discussed in detail as the three concepts: for the detailed design, for the operation of the CNS facility, for the safety assurance of itself. This report considers the two stages of mock-up tests in terms of the experimental schedule and plan. As the first stage, the small-size mock-up test using Argon will be implemented to obtain the experience in the cryogenic fluid and to understand the basic concept of the CNS thermo-siphon. In the second stage, two kinds of mock-up tests are discussed: the full-scale mock-up test using liquid hydrogen or the integrated final test using hydrogen outside the reactor after the full-scale mock-up test using Freon gas. The contents discussed in this report will be the basis or the guide lines for the mock-up test. In addition, the results of the mock-up test will be the foundation for the safe operation of the HANARO-CNS facility

Study guide to accompany computers data and processing

CERN Document Server

Deitel, Harvey M

1985-01-01

Study Guide to Accompany Computer and Data Processing provides information pertinent to the fundamental aspects of computers and computer technology. This book presents the key benefits of using computers.Organized into five parts encompassing 19 chapters, this book begins with an overview of the evolution of modern computing systems from the earliest mechanical calculating devices to microchips. This text then introduces computer hardware and describes the processor. Other chapters describe how microprocessors are made and describe the physical operation of computers. This book discusses as w

Preliminary study of the application of transthoracic echocardiography-guided three-dimensional printing for the assessment of structural heart disease.

Science.gov (United States)

Zhu, Yanbo; Liu, Jianshi; Wang, Lianqun; Guan, Xin; Luo, Yongjuan; Geng, Jie; Geng, Qingguo; Lin, Yunjia; Zhang, Lixia; Li, Xixue; Lu, Yaping

2017-12-01

To investigate the feasibility and diagnostic value of a preoperative transthoracic echocardiography-guided three-dimensional printed model (TTE-guided 3DPM) for the assessment of structural heart disease (SHD). Fourty-four patients underwent cardiac surgery at Tianjin Chest Hospital. The patients were preoperatively assessed using TTE-guided 3DPM, which was compared to conventional three-dimensional transthoracic echocardiography (3DTTE) along with direct intraoperative findings, which were considered the "gold standard." Twelve patients had SHD, including four with mitral prolapse, two with partial endocardial cushion defects, two with secondary atrial septal defects, two with rheumatic mitral stenosis, one with tetralogy of Fallot, and one with a ventricular septal defect (VSD). Thirty-two patients who did not have SHDs were designated as the negative control group. The sensitivity and specificity of the TTE-guided 3DPM were greater than or equal to those of the 3DTTE. The P-value of the McNemar test of 3DTTE was >.05, which indicates that the difference was not statistically significant (Kappa = 0.745, P guided 3DPM was >.05, which indicates that the difference was not statistically significant (Kappa = 0.955, P guided 3DPM resulted in a P-value >.05, which indicates that the difference was not statistically significant (Kappa = 0.879, P guided 3DPM displayed the 3D structure of SHDs and cardiac lesions clearly and was consistent with the intra-operative findings. Transthoracic echocardiography-guided three-dimensional printed model (TTE-guided 3DPM) provides essential information for preoperative evaluation and decision making for patients with SHDs. © 2017, Wiley Periodicals, Inc.

A guide to archival collections relating to radioactive fallout from nuclear weapon testing

International Nuclear Information System (INIS)

1989-10-01

This guide has been prepared by professional historians who have a working knowledge of many of the record collections, included in the following pages. In describing materials, they have tried to include enough information so that persons unfamiliar with the complexities of large record systems will be able to determine the nature of the information in, and the quality of, each record collection. The guide is organized alphabetically by the means of the record repositories, not by the organizations which have custody of the records. It should be noted that arrangement by location does not reveal at a single glance all of the materials that may have originated in a specific laboratory, research center, or government agency. For example, records originated in one of the Atomic Energy Commission's national laboratories may, in some cases, be listed under the Federal Records Centers to which they have been retired. Thus, this guide includes an index of agencies originating documents and pages listing those agencies

Can nurse teachers manage student incivility by guided democracy? A grounded theory study.

Science.gov (United States)

Rad, Mostafa; Karimi Moonaghi, Hossein; Ildarabadi, Eshagh

2017-07-17

Managing incivility in academic settings is among the basic concerns and challenges of most educational systems, including nursing education. Incivility management cannot be considered devoid of disruptive behaviors. However, incivility management is a complexphenomenon upon which few studies are conducted. The present study aims at discovering teachers and students' experiences regarding incivility and developing an approach to manage nursing students' incivility. The present study was conducted based on the qualitative research design of the grounded theory methodology. This study was conducted at schools of nursing in academic settings in Iran. Study participants in the present study include nurse teachers (N=20) and nursing students (N=9). In-depth semi-structured interviews were conducted using theoretical and purposive sampling. Constant comparative analysis was used for data analysis. The results include four main categories; (1) deterioration of learning; (2) dominant individual and organisational culture; (3) guided democracy; and (4) movement toward professionalism. Guided democracy is recognised as the main basic psychosocial process for incivility management. Incivility management is pursued to help learners develop professional performance. As indicated by the results of the present study, guided democracy is an effective strategy for incivility management in nursing education. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Procalcitonin Testing to Guide Antibiotic Therapy in Acute Upper and Lower Respiratory Tract Infections.

Science.gov (United States)

Schuetz, Philipp; Wirz, Yannick; Mueller, Beat

2018-03-06

Is the use of procalcitonin for guiding antibiotic decisions in patients with acute upper and lower respiratory tract infections associated with improved clinical outcomes compared with usual care? Among patients with varying types and severity of acute respiratory infection, using procalcitonin to guide decisions about antibiotics is associated with lower rates of antibiotic exposure, antibiotic-related adverse effects, and mortality.

Three-dimensional planning and use of patient-specific guides improve glenoid component position: an in vitro study.

Science.gov (United States)

Walch, Gilles; Vezeridis, Peter S; Boileau, Pascal; Deransart, Pierric; Chaoui, Jean

2015-02-01

Glenoid component positioning is a key factor for success in total shoulder arthroplasty. Three-dimensional (3D) measurements of glenoid retroversion, inclination, and humeral head subluxation are helpful tools for preoperative planning. The purpose of this study was to assess the reliability and precision of a novel surgical method for placing the glenoid component with use of patient-specific templates created by preoperative surgical planning and 3D modeling. A preoperative computed tomography examination of cadaveric scapulae (N = 18) was performed. The glenoid implants were virtually placed, and patient-specific guides were created to direct the guide pin into the desired orientation and position in the glenoid. The 3D orientation and position of the guide pin were evaluated by performing a postoperative computed tomography scan for each scapula. The differences between the preoperative planning and the achieved result were analyzed. The mean error in 3D orientation of the guide pin was 2.39°, the mean entry point position error was 1.05 mm, and the mean inclination angle error was 1.42°. The average error in the version angle was 1.64°. There were no technical difficulties or complications related to use of patient-specific guides for guide pin placement. Quantitative analysis of guide pin positioning demonstrated a good correlation between preoperative planning and the achieved position of the guide pin. This study demonstrates the reliability and precision of preoperative planning software and patient-specific guides for glenoid component placement in total shoulder arthroplasty. Copyright © 2015. Published by Elsevier Inc.

Operation of Wastewater Treatment Plants: A Field Study Training Program. Volume II, Instructor's Guide. Second Edition.

Science.gov (United States)

California State Univ., Sacramento. Dept. of Civil Engineering.

The objective of this instructor's guide is to help provide students with knowledge and skills for employment in the field of wastewater treatment. Included in each chapter outline are: (1) objectives, (2) instructional approach, (3) answers to the objective test in the student's text, and (4) an explanation of these answers. The material…

Operation of Wastewater Treatment Plants: A Field Study Training Program. Volume I, Instructor's Guide. Second Edition.

Science.gov (United States)

California State Univ., Sacramento. Dept. of Civil Engineering.

The objective of this instructor's guide is to help provide students with knowledge and skills for employment in the field of wastewater treatment. Included in each chapter outline are: (1) objectives, (2) instructional approach, (3) answers to the objective test in the student's text, and (4) an explanation of these answers. The material…

COATING ALTERNATIVES GUIDE (CAGE) USER'S GUIDE

Science.gov (United States)

The guide provides instructions for using the Coating Alternatives GuidE (CAGE) software program, version 1.0. It assumes that the user is familiar with the fundamentals of operating an IBM-compatible personal computer (PC) under the Microsoft disk operating system (MS-DOS). CAGE...

Effect of 2 Different Drilling Speeds on the Osseointegration of Implants Placed With Flapless Guided Surgery: A Study in Rabbits

DEFF Research Database (Denmark)

Landazuri-Del Barrio, Ricardo Andres; Nunes de Paula, Wagner; Spin-Neto, Rubens

2017-01-01

OBJECTIVE: The aim of this study was to evaluate the influence of the drilling speed on bone healing and the osseointegration of implants placed with a guided flapless surgical technique in rabbit tibias. METHODS: For the evaluation of bone healing, a total of 30 perforations (defects) were made...... in both tibias of 15 rabbits using 2 different drilling speeds (1500 rpm-control group; 50 rpm-test group). The regeneration of bone tissue in the surgical sites was evaluated at 0, 7, and 14 days. For the evaluation of implant osseointegration, another 15 rabbits underwent drilling in both tibias...... with no statistically significant differences in the assessment of the osseointegration between the groups. CONCLUSION: In the experimental models used, the drilling speed does not prejudice the pattern of bone healing and osseointegration of implants placed with guided flapless surgery....

PET/CT-guided interventional procedures: rationale, justification, initial study, and research plan

Energy Technology Data Exchange (ETDEWEB)

Wong, K.; Rahill, J.; Cleary, K. [Computer Aided Interventions and Medical Robotics (CAIMR), Imaging Science and Information Systems (ISIS) Center, Georgetown Univ. Medical Center, Washington, DC (United States); Petrillo, S.; Earl-Graef, D. [Dept. of Radiology, Georgetown Univ. Hospital, MedStar Health, Washington, DC (United States); Banovac, F.; Levy, E. [Computer Aided Interventions and Medical Robotics (CAIMR), Imaging Science and Information Systems (ISIS) Center, Georgetown Univ. Medical Center, Washington, DC (United States); Dept. of Radiology, Georgetown Univ. Hospital, MedStar Health, Washington, DC (United States); Shekhar, R. [Dept. of Radiology, Univ. of Maryland Medical Center, Baltimore, MD (United States)

2007-06-15

Positron-emission tomography (PET) and PET/CT (computed tomography) are becoming increasingly important for diagnosis and treatment of cancer. Clinically relevant changes can sometimes be seen on PET that are not seen on other imaging modalities. However, PET is not suitable for guiding biopsy as the images are not obtained in real-time. Therefore, our research group has begun developing a concept for PET/CT-guided interventional procedures. This paper presents the rationale for this concept, outlines our research plan, and includes an initial study to evaluate the relative sensitivity of CT and PET/CT in detecting suspicious lesions. (orig.)

Motion compensation for MRI-compatible patient-mounted needle guide device: estimation of targeting accuracy in MRI-guided kidney cryoablations

Science.gov (United States)

Tokuda, Junichi; Chauvin, Laurent; Ninni, Brian; Kato, Takahisa; King, Franklin; Tuncali, Kemal; Hata, Nobuhiko

2018-04-01

Patient-mounted needle guide devices for percutaneous ablation are vulnerable to patient motion. The objective of this study is to develop and evaluate a software system for an MRI-compatible patient-mounted needle guide device that can adaptively compensate for displacement of the device due to patient motion using a novel image-based automatic device-to-image registration technique. We have developed a software system for an MRI-compatible patient-mounted needle guide device for percutaneous ablation. It features fully-automated image-based device-to-image registration to track the device position, and a device controller to adjust the needle trajectory to compensate for the displacement of the device. We performed: (a) a phantom study using a clinical MR scanner to evaluate registration performance; (b) simulations using intraoperative time-series MR data acquired in 20 clinical cases of MRI-guided renal cryoablations to assess its impact on motion compensation; and (c) a pilot clinical study in three patients to test its feasibility during the clinical procedure. FRE, TRE, and success rate of device-to-image registration were mm, mm, and 98.3% for the phantom images. The simulation study showed that the motion compensation reduced the targeting error for needle placement from 8.2 mm to 5.4 mm (p  <  0.0005) in patients under general anesthesia (GA), and from 14.4 mm to 10.0 mm () in patients under monitored anesthesia care (MAC). The pilot study showed that the software registered the device successfully in a clinical setting. Our simulation study demonstrated that the software system could significantly improve targeting accuracy in patients treated under both MAC and GA. Intraprocedural image-based device-to-image registration was feasible.

Eleventh Hour Network+ Exam N10-004 Study Guide

CERN Document Server

Alpern, Naomi

2009-01-01

The 11th Hour Network+ Study Guide is keyed to the N10-004 revision of the CompTIA Network+ exam. This book is streamlined to include only core certification information and is presented for ease of last-minute studying. Main objectives of the exam are covered with key concepts highlighted. ..: ..; Fast Facts quickly review fundamentals ..; Exam Warnings highlight particularly tough sections of the exam ..; Crunch Time sidebars point out key concepts to remember ..; Did You Know? sidebars cover sometimes forgotten details ..; Top Five Toughest Questions and answers help you to prepare ..

The Development of Man and His Culture: Old World Prehistory. Grade 5. Teacher Guide [And] Pupil Text [And] Pupil Guide [And] Teacher Background Material [And] A Sequential Curriculum in Anthropology. Test Form 5, Composite Form for Pre- and Post-Test. Revised, January 1968. Publications No. 25, 31, 23, 24 and 43.

Science.gov (United States)

Potterfield, James E.; And Others

This social studies unit includes a teaching guide, student text, study guide, teacher background material, and composite pretest/posttest covering archaeological methods, evolution, fossils and man, and development of culture during the prehistoric periods in the Old World. It is part of the Anthropology Curriculum Project and is designed for…

A feasibility study on different NDT techniques used for testing bond quality in cold roll bonded Al-Sn alloy/steel bimetal strips

Directory of Open Access Journals (Sweden)

Tallafuss Philipp Johannes

2017-01-01

Full Text Available This paper presents non-destructive testing (NDT results for the detection of bond defects in aluminium-tin (Al-Sn alloy/steel bimetal strips. Among all types of bimetal strip that are used in the automotive industry for plain journal engine bearings, Al-Sn alloys cold roll bonded (CRB onto steel backing is the most common type. The difficulty to evaluate the metallurgical bond between the two dissimilar metals is a major industrial concern, which comprises the risk that bearings fail in the field. Considering the harsh performance requirements, 100% online non-destructive testing would be desirable to significantly reduce the business risk. Nowadays bimetal strip manufacturers still rely on destructive testing through different peel-off tests. This work offers the results from four independent NDT studies, using active thermography, shearography, ultrasound and guided wave electromagnetic acoustic transducers (EMATs and samples with different artificially implanted defects, to explore the feasibility to qualitatively indicate the occurrence of bond defects. A destructive peel off test was used to correlate the NDT results with known bond quality. The studies were done under laboratory conditions, and in case of ultrasound also online under production conditions. During the ultrasound online test, the requirements that a NDT technique has to fulfil for online inspection of Al-Sn alloy/steel bimetal strip were established. For active thermography, shearography and guided wave EMAT techniques, it was theoretically analysed, if the laboratory test results could be transferred to testing under production conditions. As a result, guided waves using EMATs, among the four tested methods, are best suited for online inspection of Al-Sn alloy/steel bimetal strip. This research was carried out in collaboration with MAHLE Engine Systems UK Ltd., an Al-Sn alloy/steel bimetal strip manufacturer for the automotive industry.

Promotion Guide – A guide for career reviews

CERN Multimedia

Staff Association

2017-01-01

On 8 February, the Standing Concertation Committee (SCC) approved the Promotion Guide, subtitled “A guide for career reviews”. The English version is already published on the HR website. This Promotion Guide is not very different from the Career Path Guide which it replaces following the implementation of the new career structure with benchmark jobs and grades. Structure The guide is composed of three parts: Section I – Introduction revisits the reference documents: the Staff Rules and Regulations (S&R) and the Administrative Circular No. 26 (AC 26). In the Staff Rules and Regulations, the term promotion is defined as a change of grade1 and in Administrative Circular No. 26, the Promotion Guide is referenced under paragraph 452. The objective of the Promotion Guide is laid out in Section I: “The Promotion Guide defines the criteria to be used as a reference for career reviews with a view to a potential promotion”. However, this guide do...

Guide to In-Flight Thrust Measurement of Turbojets and Fan Engines

Science.gov (United States)

1979-01-01

test toi test Lirt series escaorT Ts tter I=~~ Fta -F teEnier 193 7 REFERENCES No. Author(s) Title. etc. 0-I MIDAP Study Group Guide to Procedures for...Research and P L Goldsmith Production. Oliver and Boyd, 4th edition, 1972 4-9 M J Moroney Facts from Figures. Penguin Books, 1958 4-10 F W Burcham An

Usability of FDA-approved medication guides.

Science.gov (United States)

Wolf, Michael S; King, Jennifer; Wilson, Elizabeth A H; Curtis, Laura M; Bailey, Stacy Cooper; Duhig, James; Russell, Allison; Bergeron, Ashley; Daly, Amanda; Parker, Ruth M; Davis, Terry C; Shrank, William H; Lambert, Bruce

2012-12-01

Medication guides are required documents to be distributed to patients in order to convey serious risks associated with certain prescribed medicines. Little is known about the effectiveness of this information to adequately inform patients on safe use. To examine the readability, suitability, and comprehensibility of medication guides, particularly for those with limited literacy. Assessments of suitability and readability of 185 medication guides, and a sub-study examining change in suitability and readability from 2006 to 2010 among 32 of the medication guides (Study 1); 'open book' comprehension assessment of medication guides (Study 2). Two general internal medicine clinics in Chicago, IL. Four hundred and forty-nine adults seeking primary care services, ages 18-85. For Study 1, the Suitability Assessment of Materials (SAM) and Lexile score for readability. For Study 2, a tailored comprehension assessment of content found in three representative medication guides. The 185 analyzed medication guides were on average 1923 words (SD = 1022), with a mean reading level of 10-11th grade. Only one medication guide was deemed suitable in SAM analyses. None provided summaries or reviews, or framed the context first, while very few were rated as having made the purpose evident (8 %), or limited the scope of content (22 %). For Study 2, participants' comprehension of medication guides was poor (M = 52.7 % correct responses, SD = 22.6). In multivariable analysis, low and marginal literacy were independently associated with poorer understanding (β = -14.3, 95 % CI -18.0 - -10.6, p < 0.001; low: β = -23.7, 95 % CI -28.3 - -19.0, p < 0.001). Current medication guides are of little value to patients, as they are too complex and difficult to understand especially for individuals with limited literacy. Explicit guidance is offered for improving these print materials.

MCSA Windows Server 2012 R2 installation and configuration study guide exam 70-410

CERN Document Server

Panek, William

2015-01-01

Master Windows Server installation and configuration withhands-on practice and interactive study aids for the MCSA: WindowsServer 2012 R2 exam 70-410 MCSA: Windows Server 2012 R2 Installation and ConfigurationStudy Guide: Exam 70-410 provides complete preparationfor exam 70-410: Installing and Configuring Windows Server 2012 R2.With comprehensive coverage of all exam topics and plenty ofhands-on practice, this self-paced guide is the ideal resource forthose preparing for the MCSA on Windows Server 2012 R2. Real-worldscenarios demonstrate how the lessons are applied in everydaysettings. Reader

Magnetic Resonance-Guided High-Intensity-Focused Ultrasound for Palliation of Painful Skeletal Metastases: A Pilot Study.

Science.gov (United States)

Chan, Michael; Dennis, Kristopher; Huang, Yuexi; Mougenot, Charles; Chow, Edward; DeAngelis, Carlo; Coccagna, Jennifer; Sahgal, Arjun; Hynynen, Kullervo; Czarnota, Gregory; Chu, William

2017-10-01

Bone is one of the most common sites of metastases, with bone metastases-related pain representing a significant source of morbidity among patients with cancer. Magnetic resonance-guided focused ultrasound is a noninvasive, outpatient modality with the potential for treating painful bone metastases. The aim of this study is to report our initial experience with magnetic resonance-guided focused ultrasound in the treatment of bone metastases and our preliminary analysis of urinary cytokine levels after therapy. This was a single-center pilot study of 10 patients with metastatic cancer to investigate the feasibility of magnetic resonance-guided focused ultrasound for primary pain control in device-accessible skeletal metastases. Treatments were performed on a clinical magnetic resonance-guided focused ultrasound system using a volumetric ablation technique. Primary efficacy was assessed using Brief Pain Inventory scores and morphine equivalent daily dose intake at 3 time points: before, day 14, and day 30 after the magnetic resonance-guided focused ultrasound treatment. Urine cytokines were measured 3 days before treatment and 2 days after the treatment. Of the 10 patients, 8 were followed up 14 days and 6 were followed up 30 days after the treatment. At day 14, 3 patients (37.5%) exhibited partial pain response and 4 patients (50%) exhibited an indeterminate response, and at day 30 after the treatment, 5 patients (83%) exhibited partial pain response. No treatment-related adverse events were recorded. Of the urine cytokines measured, only Transforming growth factor alpha (TGFα) demonstrated an overall decrease, with a trend toward statistical significance ( P = .078). Our study corroborates magnetic resonance-guided focused ultrasound as a feasible and safe modality as a primary, palliative treatment for painful bone metastases and contributes to the limited body of literature using magnetic resonance-guided focused ultrasound for this clinical indication.

Care guides: an examination of occupational conflict and role relationships in primary care.

Science.gov (United States)

Wholey, Douglas R; White, Katie M; Adair, Richard; Christianson, Jon B; Lee, Suhna; Elumba, Deborah

2013-01-01

Improving the efficiency and effectiveness of primary care treatment of patients with chronic illness is an important goal in reforming the U.S. health care system. Reducing occupational conflicts and creating interdependent primary care teams is crucial for the effective functioning of new models being developed to reorganize chronic care. Occupational conflict, role interdependence, and resistance to change in a proof-of-concept pilot test of one such model that uses a new kind of employee in the primary care office, a "care guide," were analyzed. Care guides are lay individuals who help chronic disease patients and their providers achieve standard health goals. The aim of this study was to examine the development of occupational boundaries, interdependence of care guides and primary care team members, and acceptance by clinic employees of this new kind of health worker. A mixed methods, pilot study was conducted using qualitative analysis; clinic, provider, and patient surveys; administrative data; and multivariate analysis. Qualitative analysis examined the emergence of the care guide role. Administrative data and surveys were used to examine patterns of interdependence between care guides, physicians, team members, and clinic staff; obtain physician evaluations of the care guide role; and evaluate the effect of care guides on patient perceptions of care coordination and follow-up. Evaluation of implementation of the care guide model showed that (a) the care guide scope of practice was clearly defined; (b) interdependent relationships between care guides and providers were formed; (c) relational triads consisting of patient, care guide, and physician were created; (d) patients and providers were supported in managing chronic disease; and (e) resistance to this model among traditional employees was minimized. The feasibility of implementing a new care model for chronic disease management in the primary care setting, identifying factors associated with a positive

Ultrasonic guided wave for monitoring corrosion of steel bar

Science.gov (United States)

Liu, Xi; Qin, Lei; Huang, Bosheng

2018-01-01

Steel corrosion of reinforced concrete structures has become a serious problem all over the word. In this paper, the work aims at monitoring steel corrosion using ultrasonic guided wave (UGW). Ultrasonic guided wave monitoring is a dynamic and non-destructive testing technology. The advantages of ultrasonic guided wave monitoring for reinforcement corrosion are real-time, online and continuous. In addition, it can judge the different stages of steel bar corrosion, which achieved non-destructive detection.

Guide to good practices for on-the-job training

Energy Technology Data Exchange (ETDEWEB)

1992-07-01

The purpose of the Department of Energy (DOE) Guide to Good Practices for On-the-Job Training (OJT) is to provide DOE contractor organizations with information that can be used to modify existing programs or to develop new programs. This guide replaces the Guide to Good Practices for On-the-Job Training that was distributed to DOE and DOE contractors in 1987. DOE contractors should not feel obligated to adopt all parts of this guide. Rather, they can use the information in this guide to develop programs that apply to their facility. This guide can be used as an aid in the design and development of a facility's OJT programs and to assist the instructors who conduct OJT and performance tests in the areas of facility operations, maintenance, and technical supports.

Career Preparation in Agricultural Products (Food Processing): A Curriculum Guide for High School Vocational Agriculture. Test Edition.

Science.gov (United States)

Moore, Eddie A.

This curriculum guide in agricultural products (food processing) is one of 10 guides developed as part of a vocational project stressing agribusiness, natural resources, and environmental protection. The scope of this guide includes three occupational subgroups: meat, fish, poultry; dairy (milk) products; fruits and vegetables. It is meant as an…

The effect of guided imagery on the third stage of labor: a pilot study.

Science.gov (United States)

Schorn, Mavis N

2009-08-01

The purpose of this pilot study was to test the effects of guided imagery on blood loss during the third stage of labor. This was a three-group randomized controlled trial. Recruitment was conducted from a university nurse-midwifery practice. Sixty (60) women between pregnancy weeks 36 and 38 participated. The women were randomized into experimental, placebo, and control groups. Intrauterine pressure catheters were used to measure uterine contraction frequency and intensity. Blood loss was measured. Analysis of variance was used to compare the three groups on continuous variables. Complete data were collected on 41 subjects. No significant differences were found among the groups on demographic or potentially confounding variables. Blood loss was nominally lower in the experimental group, but conclusions cannot be drawn due to the sample size.

Fast 3-T MR-guided transrectal prostate biopsy using an in-room tablet device for needle guide alignment: a feasibility study.

Science.gov (United States)

Overduin, Christiaan G; Heidkamp, Jan; Rothgang, Eva; Barentsz, Jelle O; de Lange, Frank; Fütterer, Jurgen J

2018-05-22

To assess the feasibility of adding a tablet device inside the scanner room to assist needle-guide alignment during magnetic resonance (MR)-guided transrectal prostate biopsy. Twenty patients with one cancer-suspicious region (CSR) with PI-RADS score ≥ 4 on diagnostic multiparametric MRI were prospectively enrolled. Two orthogonal scan planes of an MR fluoroscopy sequence (~3 images/s) were aligned to the CSR and needle-guide pivoting point. Targeting was achieved by manipulating the needle-guide under MR fluoroscopy feedback on the in-room tablet device. Technical feasibility and targeting success were assessed. Complications and biopsy procedure times were also recorded. Needle-guide alignment with the in-room tablet device was technically successful in all patients and allowed sampling after a single alignment step in 19/20 (95%) CSRs (median size 14 mm, range: 4-45). Biopsy cores contained cancer in 18/20 patients. There were no per-procedural or post-biopsy complications. Using the tablet device, the mean time to first biopsy was 5.8 ± 1.0 min and the mean total procedure time was 23.7 ± 4.1 min. Use of an in-room tablet device to assist needle-guide alignment was feasible and safe during MR-guided transrectal prostate biopsy. Initial experience indicates potential for procedure time reduction. • Performing MR-guided prostate biopsy using an in-room tablet device is feasible. • CSRs could be sampled after a single alignment step in 19/20 patients. • The mean procedure time for biopsy with the tablet device was 23.7 min.

Radiological design guide

International Nuclear Information System (INIS)

Evans, R.A.

1994-01-01

The purpose of this design guide is to provide radiological safety requirements, standards, and information necessary for designing facilities that will operate without unacceptable risk to personnel, the public, or the environment as required by the US Department of Energy (DOE). This design guide, together with WHC-CM-4-29, Nuclear Criticality Safety, WHC-CM-4-46, Nonreactor Facility Safety Analysis, and WHC-CM-7-5, Environmental Compliance, covers the radiation safety design requirements at Westinghouse Hanford Company (WHC). This design guide applies to the design of all new facilities. The WHC organization with line responsibility for design shall determine to what extent this design guide shall apply to the modifications to existing facilities. In making this determination, consideration shall include a cost versus benefit study. Specifically, facilities that store, handle, or process radioactive materials will be covered. This design guide replaces WHC-CM-4-9 and is designated a living document. This design guide is intended for design purposes only. Design criteria are different from operational criteria and often more stringent. Criteria that might be acceptable for operations might not be adequate for design

Testing a model-guided approach to the development of new thermoluminescent materials using YAG:Ln produced by solution combustion synthesis

International Nuclear Information System (INIS)

Milliken, E.D.; Oliveira, L.C.; Denis, G.; Yukihara, E.G.

2012-01-01

The objective of this work is to test a model-guided approach, coupled with an efficient material synthesis method, for the development of new thermoluminescent (TL) material using yttrium aluminum garnet (YAG, Y 3 Al 5 O 12 ) as a model material. We systematically investigated undoped and lanthanide-doped YAG using x-ray diffraction (XRD), TL, and radioluminescence (RL) to understand the role of the lanthanides in the TL process, i.e., whether they act as trapping centers or recombination centers. We also prepared samples with multiple dopants to test the possibility of creating materials with multiple TL peaks. The initial rise method of TL analysis was used to estimate the activation energies associated with the TL peaks. The role of the lanthanide impurities predicted using the lanthanide energy level diagram was largely confirmed, as evidenced by the TL curves, TL emission spectra and activation energy analysis. However, our data suggests that the exact role of the lanthanide dopants during the TL process depends on the thermal stability of the trapped charges, i.e. the same lanthanide can act as a trapping center in one system and as a recombination center in another system. These results demonstrate the possibility of introducing appropriate TL peaks and recombination centers in YAG produced by SCS by lanthanide doping, where the role of the lanthanide dopant is consistent with a model for the lanthanide energy levels. This allows for a more guided approach to the development of new TL materials with peaks in certain temperature range or multiple TL peaks, at least in conditions in which the model applies. - Highlights: ► TL peaks and recombination centers introduced in YAG by Ln doping. ► Role of the Ln consistent with model for the Ln energy levels. ► Model-guided approach to the development of new TL materials demonstrated.

Guided Reading and Motivation

Science.gov (United States)

Hauptman, Allyson L.

2012-01-01

The purpose of this study was to determine the relationship between Guided Reading and student motivation to read across fourth, fifth, and sixth grades. The study defined literacy motivation as: (a) task value; (b) self-perceived competence; (c) students' perceptions of the Guided Reading format. Factor analysis and repeated measures ANOVAs were…

An External Archive-Guided Multiobjective Particle Swarm Optimization Algorithm.

Science.gov (United States)

Zhu, Qingling; Lin, Qiuzhen; Chen, Weineng; Wong, Ka-Chun; Coello Coello, Carlos A; Li, Jianqiang; Chen, Jianyong; Zhang, Jun

2017-09-01

The selection of swarm leaders (i.e., the personal best and global best), is important in the design of a multiobjective particle swarm optimization (MOPSO) algorithm. Such leaders are expected to effectively guide the swarm to approach the true Pareto optimal front. In this paper, we present a novel external archive-guided MOPSO algorithm (AgMOPSO), where the leaders for velocity update are all selected from the external archive. In our algorithm, multiobjective optimization problems (MOPs) are transformed into a set of subproblems using a decomposition approach, and then each particle is assigned accordingly to optimize each subproblem. A novel archive-guided velocity update method is designed to guide the swarm for exploration, and the external archive is also evolved using an immune-based evolutionary strategy. These proposed approaches speed up the convergence of AgMOPSO. The experimental results fully demonstrate the superiority of our proposed AgMOPSO in solving most of the test problems adopted, in terms of two commonly used performance measures. Moreover, the effectiveness of our proposed archive-guided velocity update method and immune-based evolutionary strategy is also experimentally validated on more than 30 test MOPs.

Guide On Safety Tests

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-05-15

This book tells US important things to do safety tests, which includes basic caution for experiment treatment of used materials such as ignition substance inflammables, explosive substance and toxic substance, handling of used equipment like inflammable device, machine, high pressure device, high pressure gas, and high energy device, first aid such as addiction by drug, flame, radiation exposure, and heart massage treatment of waste in laboratory like cautions on general treatment, handling of inorganic waste, organic waste and waste treatment with disposal facilities.

Guide On Safety Tests

International Nuclear Information System (INIS)

1987-05-01

This book tells US important things to do safety tests, which includes basic caution for experiment treatment of used materials such as ignition substance inflammables, explosive substance and toxic substance, handling of used equipment like inflammable device, machine, high pressure device, high pressure gas, and high energy device, first aid such as addiction by drug, flame, radiation exposure, and heart massage treatment of waste in laboratory like cautions on general treatment, handling of inorganic waste, organic waste and waste treatment with disposal facilities.

A comparison of ultrasound guided fine needle aspiration cytology and core needle biopsy in evaluation of palpable breast lesions

International Nuclear Information System (INIS)

Altaf, H.N.; Farooqui, F.

2015-01-01

Objective: To compare ultrasound guided fine-needle aspiration cytology (FNAC) and core needle biopsy (CNB) in patients presenting with palpable breast lumps (PBLs), in terms of sensitivity and specificity, taking final histopathology as gold standard. Methodology: This cross-sectional study was conducted at Holy Family Hospital, Rawalpindi, Pakistan. Ultrasound guided FNAC and CNB were taken of all female patients with PBLs. The results were compared with final histopathology as gold standard. Data analysis was performed using SPSS software and chi-square test. Results: A total of 60 patients were included in the study. The mean age was 33.8 yrs. The sensitivity and specificity of ultrasound guided FNAC were 68.7% and 93.1%, respectively. The sensitivity and specificity of ultrasound guided CNB was 93.7% and 100%. The accuracy of FNAC was 86.2% and that of core needle biopsy was 98.3%. Conclusion: The ultrasound guided core needle biopsy can be used as an initial diagnostic test for the evaluation of all PBLs. Because of high negative predictive value core needle biopsy can replace surgical excision biopsy for benign lesions. (author)

Eliciting preferences for priority setting in genetic testing: a pilot study comparing best-worst scaling and discrete-choice experiments

OpenAIRE

Severin, Franziska; Schmidtke, Jörg; Mühlbacher, Axel; Rogowski, Wolf H

2013-01-01

Given the increasing number of genetic tests available, decisions have to be made on how to allocate limited health-care resources to them. Different criteria have been proposed to guide priority setting. However, their relative importance is unclear. Discrete-choice experiments (DCEs) and best-worst scaling experiments (BWSs) are methods used to identify and weight various criteria that influence orders of priority. This study tests whether these preference eliciting techniques can be used f...

CCNA routing and switching study guide exams 100-101, 200-101, and 200-120

CERN Document Server

Lammle, Todd

2013-01-01

Prepare for the new CCNA exams with this Todd Lammle study guide Cisco author, speaker, and trainer Todd Lammle is considered the authority on all things networking, and his books have sold almost a million copies worldwide. This all-purpose CCNA study guide methodically covers all the objectives of the ICND1 (100-101) and ICND2 (200-101) exams as well as providing additional insight for those taking CCNA Composite (200-120) exam. It thoroughly examines operation of IP data networks, LAN switching technologies, IP addressing (IPv4/IPv6), IP routing technologies, IP services, network device s

Precision of guided scanning procedures for full-arch digital impressions in vivo.

Science.gov (United States)

Zimmermann, Moritz; Koller, Christina; Rumetsch, Moritz; Ender, Andreas; Mehl, Albert

2017-11-01

System-specific scanning strategies have been shown to influence the accuracy of full-arch digital impressions. Special guided scanning procedures have been implemented for specific intraoral scanning systems with special regard to the digital orthodontic workflow. The aim of this study was to evaluate the precision of guided scanning procedures compared to conventional impression techniques in vivo. Two intraoral scanning systems with implemented full-arch guided scanning procedures (Cerec Omnicam Ortho; Ormco Lythos) were included along with one conventional impression technique with irreversible hydrocolloid material (alginate). Full-arch impressions were taken three times each from 5 participants (n = 15). Impressions were then compared within the test groups using a point-to-surface distance method after best-fit model matching (OraCheck). Precision was calculated using the (90-10%)/2 quantile and statistical analysis with one-way repeated measures ANOVA and post hoc Bonferroni test was performed. The conventional impression technique with alginate showed the lowest precision for full-arch impressions with 162.2 ± 71.3 µm. Both guided scanning procedures performed statistically significantly better than the conventional impression technique (p Cerec Omnicam Ortho were 74.5 ± 39.2 µm and for group Ormco Lythos 91.4 ± 48.8 µm. The in vivo precision of guided scanning procedures exceeds conventional impression techniques with the irreversible hydrocolloid material alginate. Guided scanning procedures may be highly promising for clinical applications, especially for digital orthodontic workflows.

Numerical study of pressure fluctuations in different guide vanes' opening angle in pump mode of a pump turbine

International Nuclear Information System (INIS)

Sun, Y K; Zuo, Z G; Liu, S H; Wu, Y L; Liu, J T

2012-01-01

A numerical model based on a pumped storage power station was built to develop the numerical simulation, to analyze the pressure fluctuations in a pump turbine in different guide vanes' opening angle. The different guide vanes' opening angles were simulated using the SST k-ω turbulence model and SIMPLEC Pressure-Velocity coupling scheme. The pressure sensor were placed in mainly three positions, they are: bottom ring between runner and the wicket gates, downstream and left side in the draft tube cone below the runner. All the peak to peak values of pressure fluctuation meet signal probability of 97%. The frequency is gained by Fast Fourier Transform. The pressure fluctuations in different positions of the model in pump condition were showed when the guide vanes' opening angels were different. The simulation results confirmed the results gained in model tests. The results show that pressure fluctuations in design opening angle were much lower than those in off design opening angle. The main source of pressure fluctuations between runner and guide vanes is rotor stator interaction. While a lower frequency is the main frequency of the pressure fluctuation in draft tube.

Color stability of shade guides after autoclave sterilization.

Science.gov (United States)

Schmeling, Max; Sartori, Neimar; Monteiro, Sylvio; Baratieri, Luiz

2014-01-01

This study evaluated the influence of 120 autoclave sterilization cycles on the color stability of two commercial shade guides (Vita Classical and Vita System 3D-Master). The specimens were evaluated by spectrophotometer before and after the sterilization cycles. The color was described using the three-dimensional CIELab system. The statistical analysis was performed in three chromaticity coordinates, before and after sterilization cycles, using the paired samples t test. All specimens became darker after autoclave sterilization cycles. However, specimens of Vita Classical became redder, while those of the Vita System 3D-Master became more yellow. Repeated cycles of autoclave sterilization caused statistically significant changes in the color coordinates of the two shade guides. However, these differences are considered clinically acceptable.

PENGARUH GUIDE PERFORMANCE DAN QUALITY TOURISM SERVICE TERHADAP REVISIT INTENTION DI KEBUN RAYA BOGOR

Directory of Open Access Journals (Sweden)

Rian Andriani

2016-11-01

ABSTRACT Bogor Botanical Gardens is one of tourist destination in Bogor City, West Java, which the geographical in a strategic location between two big cities, Jakarta and Bandung. This location factor is can become an opportunity for Bogor Botanical Gardens to become a favorite tourist destination in Bogor City. Guide Performance and Quality Tourism Service is one of part of the tourism, so the researcher focus to Guide Performance and Quality Tourism Service To Revisit Intention in Bogor Botanical Gardens. In this research, the researcher used quantitative methode with descriptive verificative. The researcher used 100 respondent for a sample. In this research, the researcher used multiple linier regresion analysis with hypotesis test used determination coefficient test and F test. The classical assumption of this research is used normality test, multicollinearity test, heteroskedastisitas test and auto correlation test. In this research, the Guide Performance and Quality Tourism Service factors has an influence 33,2% of Revisit Intention in Bogor Botanical Garden. Keywords: Guide Performance, Quality Tourism Service and Revisit Intention

Guided transmission of highly charged ions through nanocapillaries in PET. Study of the energy dependencies

International Nuclear Information System (INIS)

Helhammer, R.; Pesic, Z.D.; Sobocinski, P.; Bundesmann, J.; Fink, D.; Stolterfoht, N.; Sulik, B.

2004-01-01

Full text: Recently we reported experiments in which slow highly charged ions are transmitted through nanocapillaries of 100nm diameter in an insulating PET foil of 10μm thickness [1]. The results of this work differ significantly from previous studies, which have been focused on capillaries in metals [2]. We measured the transmission of 3 keV Ne 7+ ions through the capillaries and focused the attention on ions whose charge has not changed during the passage through the capillary. The observation that the angular distribution for PET has a peak maximum whose position is equal to the tilt angle indicates a guiding of the Ne 7+ ion within the capillary. This guiding shows that the inner walls of the capillaries are charged up in a self-organizing process and collisions with the surface are finally prevented. We studied the time evolution of the capillary guiding as well as dependencies on the tilt angle [3]. Our most recent measurements were focussed on the investigation of the energy dependency for the guiding of Ne 7+ through capillaries. The measurements were done in an energy range from 2 keV up to 10 keV.We measured higher guiding efficiency for lower energies consistent with a previously developed model, which predicted an increase of the guiding efficiency with decreasing projectile energy [3]. In addition we found the effect of a narrower width of the angular distribution of transmitted ions. This effect is also well described by the model. However, further work is needed to explain the amount of charges to build up the deflection field at the end of the capillaries

Text Previews and Three Level Study Guides for Content Area Critical Reading.

Science.gov (United States)

Bean, Thomas W.; Ericson, Bonnie O.

1989-01-01

Describes the integration of text previews (teacher-developed synopses of the text) and three-level study guides (encouraging factual, inferential, and problem solving responses). Claims a combination of these constitutes a powerful strategy for content area reading. (RS)

The Explicit Instruction of Reading Strategies: Directed Reading Thinking Activity vs. Guided Reading Strategies

Directory of Open Access Journals (Sweden)

Mohammad Mehdi Yazdani

2015-05-01

Full Text Available Investigating the efficiencies and deficiencies of reading strategies is one of the noticeable issues in the related theory and research in reading comprehension instruction. This study was to examine the impact of Directed Reading Thinking Activity (DRTA and Guided Reading (GR on reading comprehension. Sixty three Iranian students of grade one in Shahed high school in the city of Bojnourd took part in the study. They were assigned in three groups, one control and two experimental groups. The instruction lasted for ten weeks. This study utilized a pretest posttest control group in quantitative quasi- experimental design. The same reading comprehension test was administered as pre-test and post-test. The results were twofold: First, the instruction of learning strategies could foster reading comprehension skill. Second, while the explicit instruction of both strategies could improve the students' reading comprehension skill, Directed Reading Thinking Activity had a more significant positive effect than Guided Reading.

DOT-7A Type A packaging design guide

International Nuclear Information System (INIS)

Kelly, D.L.

1995-01-01

The purpose of this Design Guide is to provide instruction for designing a U.S. Department of Transportation Specification 7A (DOT-7A) Type A packaging. Another purpose for this Design Guide is to support the evaluation and testing activities that are performed on new designs by a U.S. Department of Energy (DOE) test facility. This evaluation and testing program is called the DOT-7A Program. When an applicant has determined that a DOT-7A packaging is needed and not commercially available, a design may be created according to this document. The design should include a packaging drawing, specifications, analysis report, operating instructions, and a Packaging Qualification Checklist; all of which should be forwarded to a DOE/HQ approved test facility for evaluation and testing. This report is being submitted through the Engineering Documentation System so that it may be used for reference and information purposes

Levine's guide to SPSS for analysis of variance

CERN Document Server

Braver, Sanford L; Page, Melanie

2003-01-01

A greatly expanded and heavily revised second edition, this popular guide provides instructions and clear examples for running analyses of variance (ANOVA) and several other related statistical tests of significance with SPSS. No other guide offers the program statements required for the more advanced tests in analysis of variance. All of the programs in the book can be run using any version of SPSS, including versions 11 and 11.5. A table at the end of the preface indicates where each type of analysis (e.g., simple comparisons) can be found for each type of design (e.g., mixed two-factor desi

Ultrasound-guided versus computed tomography-scan guided biopsy of pleural-based lung lesions.

Science.gov (United States)

Khosla, Rahul; McLean, Anna W; Smith, Jessica A

2016-01-01

Computed tomography (CT) guided biopsies have long been the standard technique to obtain tissue from the thoracic cavity and is traditionally performed by interventional radiologists. Ultrasound (US) guided biopsy of pleural-based lesions, performed by pulmonologists is gaining popularity and has the advantage of multi-planar imaging, real-time technique, and the absence of radiation exposure to patients. In this study, we aim to determine the diagnostic accuracy, the time to diagnosis after the initial consult placement, and the complications rates between the two different modalities. A retrospective study of electronic medical records was done of patients who underwent CT-guided biopsies and US-guided biopsies for pleural-based lesions between 2005 and 2014 and the data collected were analyzed for comparing the two groups. A total of 158 patients underwent 162 procedures during the study period. 86 patients underwent 89 procedures in the US group, and 72 patients underwent 73 procedures in the CT group. The overall yield in the US group was 82/89 (92.1%) versus 67/73 (91.8%) in the CT group (P = 1.0). Average days to the procedure was 7.2 versus 17.5 (P = 0.00001) in the US and CT group, respectively. Complication rate was higher in CT group 17/73 (23.3%) versus 1/89 (1.1%) in the US group (P guided biopsy is similar to that of CT-guided biopsy, with a lower complication rate and a significantly reduced time to the procedure.

A case study of application of guided waves for detecting corrosion in pipelines

Science.gov (United States)

Rostami, Javad; Safizadeh, Mir Saeed

2012-05-01

Every year noticeable amount of money is spent on fixing and replacing the damaged pipes which carry gas and fuel. Since there is a possibility for a catastrophic failure, knowing the proper time of this repair is of great importance. Because significant proportion of failures is due to wall thinning of pipes because of the corrosion, detecting the wall thinning has been a main part of nondestructive testing of pipes. There are wide variety of NDT techniques to detect this kind of defect such as conventional ultrasonic, eddy current, radiography etc. but some of these techniques, for example conventional ultrasonic needs the insulation of pipes removed and in some other cases such as radiography the test is not done at a reasonable speed. A new method of nondestructive testing of pipes which has the potential to test a long distance in a short period of time and does not need the whole insulation removed, has drawn a lot of attention. In this paper, the ability of ultrasonic guided waves for detecting corrosion in gas pipelines is experimentally investigated.

The effect of ultrasound-guided compression immediately after transrectal ultrasound-guided prostate biopsy on postbiopsy bleeding: a randomized controlled pilot study.

Science.gov (United States)

Park, Bong Hee; Kim, Jung Im; Bae, Sang Rak; Lee, Yong Seok; Kang, Sung Hak; Han, Chang Hee

2017-08-01

To evaluate whether ultrasound-guided compression performed immediately after transrectal ultrasound (TRUS)-guided prostate biopsy decreases bleeding complications. We prospectively evaluated a total of 148 consecutive patients who underwent TRUS-guided prostate biopsy between March 2015 and July 2016. Systematic 12-core prostate biopsy was performed in all patients. Of these, 100 patients were randomly assigned to one of two groups: the compression group (n = 50) underwent TRUS-guided compression on bleeding biopsy tracts immediately after prostate biopsy, while the non-compression group (n = 50) underwent TRUS-guided prostate biopsy alone. The incidence rate and duration of hematuria, hematospermia, and rectal bleeding were compared between the two groups. The incidence rates of hematuria and hematospermia were not significantly different between the two groups (60 vs. 64%, p = 0.68; 22 vs. 30%, p = 0.362, respectively, for compression vs. non-compression group). The rectal bleeding incidence was significantly lower in the compression group as compared to the non-compression group (20 vs. 44%, p = 0.01). However, there were no significant differences in the median duration of hematuria, hematospermia, or rectal bleeding between the two groups (2, 8, and 2 days vs. 2, 10, and 1 days, p > 0.05, respectively, for compression vs. non-compression group). TRUS-guided compression [p = 0.004, odds ratio (OR) 0.25] and patient age (p = 0.013, OR 0.93) were significantly protective against the occurrence of rectal bleeding after prostate biopsy in multivariable analysis. Although it has no impact on other complications, ultrasound-guided compression on bleeding biopsy tracts performed immediately after TRUS-guided prostate biopsy is an effective and practical method to treat or decrease rectal bleeding.

Electromagnetic Navigational Bronchoscopy versus CT-guided Percutaneous Sampling of Peripheral Indeterminate Pulmonary Nodules: A Cohort Study.

Science.gov (United States)

Bhatt, Kavita M; Tandon, Yasmeen K; Graham, Ruffin; Lau, Charles T; Lempel, Jason K; Azok, Joseph T; Mazzone, Peter J; Schneider, Erika; Obuchowski, Nancy A; Bolen, Michael A

2018-03-01

Purpose To compare the diagnostic yield and complication rates of electromagnetic navigational bronchoscopic (ENB)-guided and computed tomography (CT)-guided percutaneous tissue sampling of lung nodules. Materials and Methods Retrospectively identified were 149 patients sampled percutaneously with CT guidance and 146 patients who underwent ENB with transbronchial biopsy of a lung lesion between 2013 and 2015. Clinical data, incidence of complications, and nodule pathologic analyses were assessed through electronic medical record review. Lung nodule characteristics were reviewed through direct image analysis. Molecular marker studies and pathologic analyses from surgical excision were reviewed when available. Multiple-variable logistic regression models were built to compare the diagnostic yield and complication rates for each method and for different patient and disease characteristics. Results CT-guided sampling was more likely to be diagnostic than ENB-guided biopsy (86.0% [129 of 150] vs 66.0% [99 of 150], respectively), and this difference remained significant even after adjustments were made for patient and nodule characteristics (P guided sampling (P guided sampling, 88.9% [32 of 36]; CT-guided sampling, 82.0% [41 of 50]). The two groups had similar rates of major complications (symptomatic hemorrhage, P > .999; pneumothorax requiring chest tube and/or admission, P = .417). Conclusion CT-guided transthoracic biopsy provided higher diagnostic yield in the assessment of peripheral pulmonary nodules than navigational bronchoscopy with a similar rate of clinically relevant complications. © RSNA, 2017 Online supplemental material is available for this article.

Outcomes following implementation of a pediatric procedural sedation guide for referral to general anesthesia for magnetic resonance imaging studies.

Science.gov (United States)

Grunwell, Jocelyn R; Marupudi, Neelima K; Gupta, Rohan V; Travers, Curtis D; McCracken, Courtney E; Williamson, Julie L; Stockwell, Jana A; Fortenberry, James D; Couloures, Kevin; Cravero, Joseph; Kamat, Pradip P

2016-06-01

Guidelines for referral of children to general anesthesia (GA) to complete MRI studies are lacking. We devised a pediatric procedural sedation guide to determine whether a pediatric procedural sedation guide would decrease serious adverse events and decrease failed sedations requiring rescheduling with GA. We constructed a consensus-based sedation guide by combining a retrospective review of reasons for referral of children to GA (n = 221) with published risk factors associated with the inability to complete the MRI study with sedation. An interrupted time series analysis of 11 530 local sedation records from the Pediatric Sedation Research Consortium between July 2008 and March 2013, adjusted for case-mix differences in the pre- and postsedation guide cohorts, evaluated whether a sedation guide resulted in decreased severe adverse events (SAE) and failed sedation rates. A significant increase in referrals to GA following implementation of a sedation guide occurred (P pediatric procedural sedation services. © 2016 John Wiley & Sons Ltd.

Guided ultrasonic wave beam skew in silicon wafers

Science.gov (United States)

Pizzolato, Marco; Masserey, Bernard; Robyr, Jean-Luc; Fromme, Paul

2018-04-01

In the photovoltaic industry, monocrystalline silicon wafers are employed for solar cells with high conversion efficiency. Micro-cracks induced by the cutting process in the thin wafers can lead to brittle wafer fracture. Guided ultrasonic waves would offer an efficient methodology for the in-process non-destructive testing of wafers to assess micro-crack density. The material anisotropy of the monocrystalline silicon leads to variations of the guided wave characteristics, depending on the propagation direction relative to the crystal orientation. Selective guided ultrasonic wave excitation was achieved using a contact piezoelectric transducer with custom-made wedges for the A0 and S0 Lamb wave modes and a transducer holder to achieve controlled contact pressure and orientation. The out-of-plane component of the guided wave propagation was measured using a non-contact laser interferometer. The phase slowness (velocity) of the two fundamental Lamb wave modes was measured experimentally for varying propagation directions relative to the crystal orientation and found to match theoretical predictions. Significant wave beam skew was observed experimentally, especially for the S0 mode, and investigated from 3D finite element simulations. Good agreement was found with the theoretical predictions based on nominal material properties of the silicon wafer. The important contribution of guided wave beam skewing effects for the non-destructive testing of silicon wafers was demonstrated.

Investigation of guided waves propagation in pipe buried in sand

International Nuclear Information System (INIS)

Leinov, Eli; Cawley, Peter; Lowe, Michael J.S.

2014-01-01

The inspection of pipelines by guided wave testing is a well-established method for the detection of corrosion defects in pipelines, and is currently used routinely in a variety of industries, e.g. petrochemical and energy. When the method is applied to pipes buried in soil, test ranges tend to be significantly compromised because of attenuation of the waves caused by energy radiating into the soil. Moreover, the variability of soil conditions dictates different attenuation characteristics, which in-turn results in different, unpredictable, test ranges. We investigate experimentally the propagation and attenuation characteristics of guided waves in pipes buried in fine sand using a well characterized full scale experimental apparatus. The apparatus consists of an 8 inch-diameter, 5.6-meters long steel pipe embedded over 3 meters of its length in a rectangular container filled with fine sand, and an air-bladder for the application of overburden pressure. Longitudinal and torsional guided waves are excited in the pipe and recorded using a transducer ring (Guided Ultrasonics Ltd). Acoustic properties of the sand are measured independently in-situ and used to make model predictions of wave behavior in the buried pipe. We present the methodology and the systematic measurements of the guided waves under a range of conditions, including loose and compacted sand. It is found that the application of overburden pressure modifies the compaction of the sand and increases the attenuation, and that the measurement of the acoustic properties of sand allows model prediction of the attenuation of guided waves in buried pipes with a high level of confidence

[A telemetrically-guided program for weight reduction in overweight subjects (the SMART study)].

Science.gov (United States)

Körtke, H; Frisch, S; Zittermann, A; Berthold, H K; El-Arousy, M; Götting, C; Kleesiek, K; Stehle, P; Körfer, R

2008-06-01

Compliance with weight reducing programs can be improved by intensive care and control. We tested a telemetrically-guided weight reduction program in overweight and obese persons. 200 outpatients (62 males) with a mean body mass index of 34 kg/m (2) and a mean age of 47 years participated in a prospective study for one year. During the first six months, telemetrical support (weight-transmission via Bluetooth (short range)-technology, 20-minutes telephone consultation with a nutritionist) was given weekly. After six months, participants were randomly assigned either to a group with further telemonitoring support (telemetric group) or to a group without contact to our clinic (control group). At baseline, and after six and twelve months, body weight, body composition (bioelectrical impedance analysis), and parameters of the metabolic syndrome were assessed at our clinic. 16 participants terminated the study prematurely during the first 6 months and 19 participants (10 from the telemetric group and 9 from the control group) during the second 6 months. According to the intention-to-treat principle, mean weight loss was 6.7 kg (p < 0,001), mean loss of body fat was 5.1 kg (p < 0,001), and mean loss of fat-free mass was 1.6 kg (p < 0,001) within the first six months. Moreover, metabolic and cardiovascular risk markers such as waist circumference, blood pressure, serum triglycerides and blood glucose declined significantly (p < 0,001). Prevalence of the metabolic syndrome fell from 49.5% to 42.0 % (p < 0,05). During the second six months body fat content, waist circumference, and blood glucose increased again in the control group but not in the telemetric group (p < 0,05-0,001). The telemetrically-guided weight loss program was a more efficacious measure than the less intensive support without telemonitoring.

CT-guided suprascapular nerve blocks: a pilot study

Energy Technology Data Exchange (ETDEWEB)

Schneider-Kolsky, M.E.; Pike, J.; Connell, D.A. [Department of Medical Imaging, Victoria House Private Hospital, 316 Malvern Road, Prahran 3181, Melbourne, Victoria (Australia)

2004-05-01

The objective of this study was to describe the suprascapular nerve block using CT guidance and to evaluate the short- and medium-term efficacy in a range of shoulder pathologies. CT-guided infiltration around the suprascapular nerve was performed with bupivacaine and Celestone Chronodose on 40 consecutive patients presenting with chronic shoulder pathologies unresponsive to conventional treatment. Patients were interviewed using the Shoulder Pain and Disability Index (SPADI) before the procedure, 30 min after the procedure and at 3 days, 3 weeks and 6 weeks afterwards. Within 30 min of the block overall pain scores decreased from a mean ({+-}SEM) pain score of 7.0 ({+-}0.4) to 3.5 ({+-}0.5) (n=39, P<0.001). At 3 days after the procedure, the mean overall improvement of the pain and disability scores were 20.4% ({+-}4.9, P<0.001) and 16.8% ({+-}4.8, P=0.004) respectively. Sustained pain relief and reduced disability were achieved in 10 of 35 (29%) patients at 3 weeks and longer. Patients suffering from soft tissue pathologies were the most likely patients to benefit from the injection. No serious side effects were noted. In some patients with chronic soft tissue pathologies who do not respond to conventional treatment, a CT-guided suprascapular nerve block can provide safe short- and medium-term relief from pain and disability. (orig.)

CT-guided suprascapular nerve blocks: a pilot study

International Nuclear Information System (INIS)

Schneider-Kolsky, M.E.; Pike, J.; Connell, D.A.

2004-01-01

The objective of this study was to describe the suprascapular nerve block using CT guidance and to evaluate the short- and medium-term efficacy in a range of shoulder pathologies. CT-guided infiltration around the suprascapular nerve was performed with bupivacaine and Celestone Chronodose on 40 consecutive patients presenting with chronic shoulder pathologies unresponsive to conventional treatment. Patients were interviewed using the Shoulder Pain and Disability Index (SPADI) before the procedure, 30 min after the procedure and at 3 days, 3 weeks and 6 weeks afterwards. Within 30 min of the block overall pain scores decreased from a mean (±SEM) pain score of 7.0 (±0.4) to 3.5 (±0.5) (n=39, P<0.001). At 3 days after the procedure, the mean overall improvement of the pain and disability scores were 20.4% (±4.9, P<0.001) and 16.8% (±4.8, P=0.004) respectively. Sustained pain relief and reduced disability were achieved in 10 of 35 (29%) patients at 3 weeks and longer. Patients suffering from soft tissue pathologies were the most likely patients to benefit from the injection. No serious side effects were noted. In some patients with chronic soft tissue pathologies who do not respond to conventional treatment, a CT-guided suprascapular nerve block can provide safe short- and medium-term relief from pain and disability. (orig.)

Design and control of automated guided vehicle systems: A case study

NARCIS (Netherlands)

Li, Q.; Adriaansen, A.C.; Udding, J.T.; Pogromski, A.Y.

2011-01-01

In this paper, we study the design and control of automated guided vehicle (AGV) systems, with the focus on the quayside container transport in an automated container terminal. We first set up an event-driven model for an AGV system in the zone control framework. Then a number of layouts of the road

Standard guide for evaluating performance characteristics of phased-Array ultrasonic testing instruments and systems

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This guide describes procedures for evaluating some performance characteristics of phased-array ultrasonic examination instruments and systems. 1.2 Evaluation of these characteristics is intended to be used for comparing instruments and systems or, by periodic repetition, for detecting long-term changes in the characteristics of a given instrument or system that may be indicative of impending failure, and which, if beyond certain limits, will require corrective maintenance. Instrument characteristics measured in accordance with this guide are expressed in terms that relate to their potential usefulness for ultrasonic examinations. Other electronic instrument characteristics in phased-array units are similar to non-phased-array units and may be measured as described in E 1065 or E 1324. 1.3 Ultrasonic examination systems using pulsed-wave trains and A-scan presentation (rf or video) may be evaluated. 1.4 This guide establishes no performance limits for examination systems; if such acceptance criteria ar...

Student representation of magnetic field concepts in learning by guided inquiry

International Nuclear Information System (INIS)

Fatmaryanti, Siska Desy; Suparmi; Sarwanto; Ashadi

2017-01-01

The purpose of this study was to determine the change of student’s representation after the intervention of learning by guided inquiry. The population in this research were all students who took a fundamental physics course, consisted of 28 students academic year 2016, Department of Physics Education, Faculty of Teacher Training and Education, University of Muhammadiyah Purworejo. This study employed a quasi-experimental design with group pre-test and post-test. The result of the research showed that the average of students representation of magnetic field before implementation of guided inquiry was 28,6 % and after implementation was 71,4%. It means that the student’s ability of multi-representation increase. Moreover, the number of students who is able to write and draw based on experiment data increased from 10,7% to 21,4 %. It was also showed that the number of student with no answer decreased from 28,5% to 10,7%. (paper)

Student representation of magnetic field concepts in learning by guided inquiry

Science.gov (United States)

Desy Fatmaryanti, Siska; Suparmi; Sarwanto; Ashadi

2017-01-01

The purpose of this study was to determine the change of student’s representation after the intervention of learning by guided inquiry. The population in this research were all students who took a fundamental physics course, consisted of 28 students academic year 2016, Department of Physics Education, Faculty of Teacher Training and Education, University of Muhammadiyah Purworejo. This study employed a quasi-experimental design with group pre-test and post-test. The result of the research showed that the average of students representation of magnetic field before implementation of guided inquiry was 28,6 % and after implementation was 71,4%. It means that the student’s ability of multi-representation increase. Moreover, the number of students who is able to write and draw based on experiment data increased from 10,7% to 21,4 %. It was also showed that the number of student with no answer decreased from 28,5% to 10,7%.

Assessment Guide for Educators: A Content Comparison--2002 Series Test and the Current GED® Test

Science.gov (United States)

GED Testing Service, 2017

2017-01-01

This report provides a content comparison for the 2002 Series GED® test and the current GED® for the following test topic areas: (1) Mathematical Reasoning; (2) Reasoning through Language Arts; (3) Science; and (4) Social Studies.

Young Children's Development of Scientific Knowledge Through the Combination of Teacher-Guided Play and Child-Guided Play

Science.gov (United States)

Sliogeris, Marija; Almeida, Sylvia Christine

2017-09-01

Play-based approaches to science learning allow children to meaningfully draw on their everyday experiences and activities as they explore science concepts in context. Acknowledging the crucial role of the teacher in facilitating science learning through play, the purpose of this qualitative study was to examine how teacher-guided play, in conjunction with child-guided play, supports children's development of science concepts. While previous research on play-based science learning has mainly focused on preschool settings, this study explores the possibilities of play-based approaches to science in primary school contexts. Using a qualitative methodology grounded in the cultural-historical theoretical perspective, children's learning was examined during a science learning sequence that combined teacher-guided and child-guided play. This study revealed that the teacher-guided play explicitly introduced science concepts which children then used and explored in subsequent child-guided play. However, intentional teaching during the child-guided play continued to be important. Play-based approaches to science allowed children to make sense of the science concepts using familiar, everyday knowledge and activities. It became evident that the expectations and values communicated through classroom practices influenced children's learning through play.

The design, simulation and testing of an urban vertical axis wind turbine with the omni-direction-guide-vane

International Nuclear Information System (INIS)

Chong, W.T.; Fazlizan, A.; Poh, S.C.; Pan, K.C.; Hew, W.P.; Hsiao, F.B.

2013-01-01

Graphical abstract: Solar energy, renewable energy, urban wind energy, environment, augmented wind turbine. Highlights: ► A system for on-site wind–solar hybrid power generation and rain water collection. ► The omni-direction-guide-vane (ODGV) overcomes the weak wind and turbulence conditions in urban areas. ► The ODGV improves the wind turbine performance by speeding-up and guiding the wind. ► The ODGV is designed to blend into the building architecture with safety enhancement. ► The wind tunnel test and CFD simulation results are presented. - Abstract: A novel omni-direction-guide-vane (ODGV) that surrounds a vertical axis wind turbine (VAWT) is designed to improve the wind turbine performance. Wind tunnel testing was performed to evaluate the performance of a 5-bladed (Wortmann FX63-137 airfoil) H-rotor wind turbine, with and without the integration of the ODGV. The test was conducted using a scaled model turbine which was constructed to simulate the VAWT enclosed by the ODGV placed on a building. The VAWT shows an improvement on its self-starting behavior where the cut-in speed was reduced with the integration of the ODGV. Since the VAWT is able to self-start at a lower wind speed, the working hour of the wind turbine would increase. At a wind speed of 6 m/s and under free-running condition (only rotor inertia and bearing friction were applied), the ODGV helps to increase the rotor rotational speed by 182%. With extra load application at the same wind speed (6 m/s), the wind turbine power output was increased by 3.48 times at its peak torque with the aid of the ODGV. The working concept of the ODGV is to minimize the negative torque zone of a lift-type VAWT and to reduce turbulence and rotational speed fluctuation. It was verified by re-simulating the torque coefficient data of a single bladed (NACA 0015 airfoil) VAWT published by the Sandia National Laboratories. From the simulation results, with the presence of the ODGV, it was shown that the

Guided Learning at Work.

Science.gov (United States)

Billett, Stephen

2000-01-01

Guided learning (questioning, diagrams/analogies, modeling, coaching) was studied through critical incident interviews in five workplaces. Participation in everyday work activities was the most effective contributor to workplace learning. Organizational readiness and the efficacy of guided learning in resolving novel tasks were also important. (SK)

Ultrasound-guided radiofrequency neurotomy in cervical spine: sonoanatomic study of a new technique in cadavers

International Nuclear Information System (INIS)

Lee, S.-H.; Kang, C.H.; Lee, S.-H.; Derby, R.; Yang, S.N.; Lee, J.E.; Kim, J.H.; Kim, S.S.; Lee, J.-H.

2008-01-01

Aim: To develop an ultrasound-guided technique for radiofrequency (RF) cervical medial branch neurotomy and to validate the accuracy of this new method. Materials and methods: Five non-embalmed, fresh cadavers were used; three male and two female cadavers with a median age at death of 67.2 years (range 50-84 years). This study was conducted in two parts. First, two of the cadavers were used to define the sonographic target point for RF cervical medial branch neurotomy using high-resolution ultrasound (12 to 5 MHz). The needles were guided to five consecutive cervical medial branches in the cadavers under ultrasound guidance. Subsequently, the position of the ultrasound-guided needle was verified using C-arm fluoroscopy. Ultrasound-guided RF neurotomy was performed to the C5 medial branches in all five cadavers. In the three cadavers not used in the first part of the study, ultrasound-guided RF neurotomy without C-arm fluoroscopic confirmation was performed to the C3-C7 medial branches. The accuracy of neurotomy was assessed by pathological examination of the cervical medial branches obtained through cadaver dissection. Results: In all five cadavers, the sonographic target point was identified in all C3-C7 segments with the 12 to 5 MHz linear transducer. In all 20 needle placements for the first and second cadavers, C-arm fluoroscopy validated proper needle tip positions. In all five cadavers, successful neurotomy was pathologically confirmed in 30 of 34 cervical medial branches. Conclusions: Ultrasound-guided cervical medial branch neurotomy was successfully performed in 30 of 34 cervical medial branches in five cadavers. However, before eliminating fluoroscopic validation of final needle tip positioning, the technique should be validated in symptomatic patients

Visually guided male urinary catheterization: a feasibility study.

Science.gov (United States)

Willette, Paul A; Banks, Kevin; Shaffer, Lynn

2013-01-01

Ten percent to 15% of urinary catheterizations involve complications. New techniques to reduce risks and pain are indicated. This study examines the feasibility and safety of male urinary catheterization by nursing personnel using a visually guided device in a clinical setting. The device, a 0.6-mm fiber-optic bundle inside a 14F triple-lumen flexible urinary catheter with a lubricious coating, irrigation port, and angled tip, connects to a camera, allowing real-time viewing of progress on a color monitor. Two emergency nurses were trained to use the device. Male patients 18 years or older presenting to the emergency department with an indication for urinary catheterization using a standard Foley or Coudé catheter were eligible to participate in the study. Exclusion criteria were a current suprapubic tube or gross hematuria prior to the procedure. Twenty-five patients were enrolled. Data collected included success of placement, total procedure time, pre-procedure pain and maximum pain during the procedure, gross hematuria, abnormalities or injuries identified if catheterization failed, occurrence of and reason for equipment failures, and number of passes required for placement. All catheters were successfully placed. The median number of passes required was 1. For all but one patient, procedure time was ≤ 17 minutes. A median increase in pain scores of 1 point from baseline to the maximum was reported. Gross hematuria was observed in 2 patients. The success rate for placement of a Foley catheter with the visually guided device was 100%, indicating its safety, accuracy, and feasibility in a clinical setting. Minimal pain was associated with the procedure. Copyright © 2013 Emergency Nurses Association. Published by Mosby, Inc. All rights reserved.

Effectiveness of imaging-guided intra-articular injection: a comparison study between fluoroscopy and ultrasound.

Science.gov (United States)

Furtado, Rita Nely Vilar; Pereira, Daniele Freitas; da Luz, Karine Rodrigues; dos Santos, Marla Francisca; Konai, Monique Sayuri; Mitraud, Sonia de Aguiar Vilela; Rosenfeld, Andre; Fernandes, Artur da Rocha Correa; Natour, Jamil

2013-01-01

Compare the effectiveness of ultrasound and fluoroscopy to guide intra-articular injections (IAI) in selected cases. A prospective study in our outpatient clinics at the Rheumatology Division at Universidade Federal de São Paulo (UNIFESP), Brazil, was conducted to compare the short-term (4 weeks) effectiveness of ultrasound and fluoroscopy-guided IAI in patients with rheumatic diseases. Inclusion criteria were: adults with refractory synovitis undergoing IAI with glucocorticoid. All patients had IAI performed with triamcinolone hexacetonide (20mg/ml) with varying doses according to the joint injected. A total of 71 rheumatic patients were evaluated (52 women, 44 whites). Mean age was 51.9 ± 13 years and 47 of them (66.2%) were on regular DMARD use. Analysis of the whole sample (71 patients) and hip sub-analysis (23 patients) showed that significant improvement was observed for both groups in terms of pain (P < 0.001). Global analysis also demonstrated better outcomes for patients in the FCG in terms of joint flexion (P < 0.001) and percentage change in joint flexion as compared to the USG. Likert scale score analyses demonstrated better results for the patients in the USG as compared to the FCG at the end of the study (P < 0.05). No statistically significant difference between groups was observed for any other study variable. Imaging-guided IAI improves regional pain in patients with various types of synovitis in the short term. For the vast majority of variables, no significant difference in terms of effectiveness was observed between fluoroscopy and ultrasound guided IAI.

Shoulder-Mounted Robot for MRI-guided arthrography: Accuracy and mounting study.

Science.gov (United States)

Monfaredi, R; Wilson, E; Sze, R; Sharma, K; Azizi, B; Iordachita, I; Cleary, K

2015-08-01

A new version of our compact and lightweight patient-mounted MRI-compatible 4 degree-of-freedom (DOF) robot for MRI-guided arthrography procedures is introduced. This robot could convert the traditional two-stage arthrography procedure (fluoroscopy-guided needle insertion followed by a diagnostic MRI scan) to a one-stage procedure, all in the MRI suite. The results of a recent accuracy study are reported. A new mounting technique is proposed and the mounting stability is investigated using optical and electromagnetic tracking on an anthropomorphic phantom. Five volunteer subjects including 2 radiologists were asked to conduct needle insertion in 4 different random positions and orientations within the robot's workspace and the displacement of the base of the robot was investigated during robot motion and needle insertion. Experimental results show that the proposed mounting method is stable and promising for clinical application.

Suprasegmental lexical stress cues in visual speech can guide spoken-word recognition

NARCIS (Netherlands)

Jesse, A.; McQueen, J.M.

2014-01-01

Visual cues to the individual segments of speech and to sentence prosody guide speech recognition. The present study tested whether visual suprasegmental cues to the stress patterns of words can also constrain recognition. Dutch listeners use acoustic suprasegmental cues to lexical stress (changes

Application of CT-guided percutaneous thyroid biopsy in basic study of interventional therapy for Graves disease

International Nuclear Information System (INIS)

Yi Genfa; Zhao Wei; Hu Jihong; Jin Cangzheng; Yang Huiying

2007-01-01

Objective: To evaluate the value of application of CT-guided percutaneous thyroid biopsy in basic study of interventional treatment for Graves disease. Methods: Fifteen patients of hyperthyroidism caused by Graves' disease had been undertaken transcathter arterial embolizsation with PVA micropheres including 52 core needle biopsy(CNB)of pre-or post-interventional procedure. All procedures were divided into 2 groups according to the size of the thyroid enlargement: (1) II degree enlargement (n=19)under palpation puncture. (2) No enlargement or under II degree enlargement (n=33)with palpation and CT-guided puncture. Results: In group (1), 17 of the 19 procedures with palpation puncture were succeeded, reaching a successful rate of 89.5%. For group (2), the successful rate of CT-guided puncture was 91.7%. The difference between the successful rate of two groups showed statistical significance (P<0.05). No complication occurred during procedures in all cases. Conclusions: CT-guided thyroid core needle biopsy is an accurate, safe and high successful procedure providing the basic study for post-interventional treatment of Graves disease. (authors)

Visual short-term memory guides infants' visual attention.

Science.gov (United States)

Mitsven, Samantha G; Cantrell, Lisa M; Luck, Steven J; Oakes, Lisa M

2018-08-01

Adults' visual attention is guided by the contents of visual short-term memory (VSTM). Here we asked whether 10-month-old infants' (N = 41) visual attention is also guided by the information stored in VSTM. In two experiments, we modified the one-shot change detection task (Oakes, Baumgartner, Barrett, Messenger, & Luck, 2013) to create a simplified cued visual search task to ask how information stored in VSTM influences where infants look. A single sample item (e.g., a colored circle) was presented at fixation for 500 ms, followed by a brief (300 ms) retention interval and then a test array consisting of two items, one on each side of fixation. One item in the test array matched the sample stimulus and the other did not. Infants were more likely to look at the non-matching item than at the matching item, demonstrating that the information stored rapidly in VSTM guided subsequent looking behavior. Copyright © 2018 Elsevier B.V. All rights reserved.

The Experience of Being a Guide Dog Puppy Raiser Volunteer: A Longitudinal Qualitative Collective Case Study

Directory of Open Access Journals (Sweden)

Anna Chur-Hansen

2014-12-01

Full Text Available There are no published studies that consider the experiences of guide dog puppy raisers. As these people are volunteers, their continued willingness to participate in the training of dogs for assisting the vision impaired and blind is essential for the viability of guide dog schools around the world. Using a qualitative, longitudinal methodology, data were collected from nine guide dog puppy raisers at four time points: before receiving the puppy, one week, then three months after the puppy arrived, and 13 months after the puppy arrived (at which time all puppies had left the raisers. Participants reported more challenges than benefits in raising the puppies. Volunteering to be a guide dog puppy raiser may not be the pleasant experience that is anticipated when community members first offer their services. Understanding what it is like to be a puppy raiser and working towards ways in which to address problems is essential, given that, without volunteers to train and care for puppies, vision impaired and blind people would not have access to guide dogs.

TOGAF 9 foundation study guide preparation for the TOGAF 9 part 1 examination

CERN Document Server

Harrison, Rachel

2013-01-01

This title is a Study Guide for Togaf® 9 Foundation. It gives an overview of every learning objective for the Togaf 9 Foundation Syllabus and in-depth coverage on preparing and taking the Togaf 9 Part 1 Examination. It is specifically designed to help individuals prepare for certification. This Study Guide is excellent material for: * Individuals who require a basic understanding of Togaf 9; * Professionals who are working in roles associated with an architecture project such as those responsible for planning, execution, development, delivery, and operation; * Architects who are looking for a first introduction to Togaf 9; * Architects who want to achieve Level 2 certification in a stepwise manner and have not previously qualified as Togaf 8 Certified. A prior knowledge of enterprise architecture is advantageous but not required.

Mesleki Bağlılık: Turist Rehberleri Üzerine Bir İnceleme (Vocational Commitment: A Study into Tourist Guides

Directory of Open Access Journals (Sweden)

Yalçın ARSLANTÜRK

2016-03-01

Full Text Available Tourist guiding has held its vital position in any tourism system and with specific reference to Turkey, owing to the vocational law enacted in 2012, it has become a legal and obligatory element and finally recognized as a profession. Further, the nature of tour guiding entails a face to face interaction with tourists, which is why the roles of tourist guides are noteworthy in creating customer satisfaction and realization of tourism potential. It will not be wrong to hold that tour guiding does not have the righteous place in academic studies from their point, i.e. supplier side. In this context, this paper sets out to examine the vocational commitment of tourist guides in terms of two variables. The results of the study suggest that there are statistically significant differences between the sub-dimensions of vocational commitment and second employment as well as tour guiding education level. Besides, considering the specific nature of tourist guiding, suggestions have been put forward for potential future studies.

Rocketball Test Facility

Data.gov (United States)

Federal Laboratory Consortium — This test facility offers the capability to emulate and measure guided missile radar cross-section without requiring flight tests of tactical missiles. This facility...

Ultrasound-guided versus fluoroscopy-guided sacroiliac joint intra-articular injections in the noninflammatory sacroiliac joint dysfunction: a prospective, randomized, single-blinded study.

Science.gov (United States)

Jee, Haemi; Lee, Ji-Hae; Park, Ki Deok; Ahn, Jaeki; Park, Yongbum

2014-02-01

To compare the short-term effects and safety of ultrasound (US)-guided sacroiliac joint (SIJ) injections with fluoroscopy (FL)-guided SIJ injections in patients with noninflammatory SIJ dysfunction. Prospective, randomized controlled trial. University hospital. Patients (N=120) with noninflammatory sacroiliac arthritis were enrolled. All procedures were performed using an FL or US apparatus. Subjects were randomly assigned to either the FL or US group. Immediately after the SIJ injections, fluoroscopy was applied to verify the correct placement of the injected medication and intravascular injections. Treatment effects and functional improvement were compared at 2 and 12 weeks after the procedures. The verbal numeric pain scale and Oswestry Disability Index improved at 2 and 12 weeks after the injections without statistical significances between groups. Of 55 US-guided injections, 48 (87.3%) were successful and 7 (12.7%) were missed. The FL-guided SIJ approach exhibited a greater accuracy (98.2%) than the US-guided approach. Vascularization around the SIJ was seen in 34 of 55 patients. Among the 34 patients, 7 had vascularization inside the joint, 23 had vascularization around the joint, and 4 had vascularization both inside and around the joint. Three cases of intravascular injections occurred in the FL group. The US-guided approach may facilitate the identification and avoidance of the critical vessels around or within the SIJ. Function and pain relief significantly improved in both groups without significant differences between groups. The US-guided approach was shown to be as effective as the FL-guided approach in treatment effects. However, diagnostic application in the SIJ may be limited because of the significantly lower accuracy rate (87.3%). Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Radiological Control Technician: Phase 1, Site academic training study guides

International Nuclear Information System (INIS)

1992-10-01

This volume is a study guide for training Radiological Control Technicians. Provided herein are support materials for learning radiological documentation, communication systems, counting errors and statistics, dosimetry, contamination control, airborne sampling program methods, respiratory protection, radiological source control, environmental monitoring, access control and work area setup, radiological work coverage, shipment and receipt for radioactive material, radiological incidents and emergencies, personnel decontamination, first aid, radiation survey instrumentation, contamination monitoring, air sampling, and counting room equipment

Sonography-guided recording for superficial peroneal sensory nerve conduction study.

Science.gov (United States)