L2 Learners' Engagement with High Stakes Listening Tests: Does Technology Have a Beneficial Role to Play?

Science.gov (United States)

East, Martin; King, Chris

2012-01-01

In the listening component of the IELTS examination candidates hear the input once, delivered at "normal" speed. This format for listening can be problematic for test takers who often perceive normal speed input to be too fast for effective comprehension. The study reported here investigated whether using computer software to slow down…

From Test Takers to Test Makers

Science.gov (United States)

Smith, Kari

2009-01-01

As a classroom teacher, Kari Smith realized that traditional objective tests don't always assess what students actually know. But tests are so deeply embedded in the education system that it would be difficult to do away with them entirely. Smith decided to make tests into learning tools. In this article, Smith describes three strategies for…

Obstetrician/Gynecologists and Postpartum Mental Health: Differences between CME Course Takers and Nontakers

Science.gov (United States)

Leddy, Meaghan A.; Farrow, Victoria A.; Joseph, Gerald F., Jr.; Schulkin, Jay

2012-01-01

Introduction: Continuing medical education (CME) courses are an essential component of professional development. Research indicates a continued need for understanding how and why physicians select certain CME courses, as well as the differences between CME course takers and nontakers. Purpose: Obstetrician-gynecologists (OB-GYNs) are health care…

Analyzing Test-Taking Behavior: Decision Theory Meets Psychometric Theory.

Science.gov (United States)

Budescu, David V; Bo, Yuanchao

2015-12-01

We investigate the implications of penalizing incorrect answers to multiple-choice tests, from the perspective of both test-takers and test-makers. To do so, we use a model that combines a well-known item response theory model with prospect theory (Kahneman and Tversky, Prospect theory: An analysis of decision under risk, Econometrica 47:263-91, 1979). Our results reveal that when test-takers are fully informed of the scoring rule, the use of any penalty has detrimental effects for both test-takers (they are always penalized in excess, particularly those who are risk averse and loss averse) and test-makers (the bias of the estimated scores, as well as the variance and skewness of their distribution, increase as a function of the severity of the penalty).

Investigating gaze-controlled input in a cognitive selection test

OpenAIRE

Gayraud, Katja; Hasse, Catrin; Eißfeldt, Hinnerk; Pannasch, Sebastian

2017-01-01

In the field of aviation, there is a growing interest in developing more natural forms of interaction between operators and systems to enhance safety and efficiency. These efforts also include eye gaze as an input channel for human-machine interaction. The present study investigates the application of gaze-controlled input in a cognitive selection test called Eye Movement Conflict Detection Test. The test enables eye movements to be studied as an indicator for psychological test performance a...

Analysing Test-Takers’ Views on a Computer-Based Speaking Test

Directory of Open Access Journals (Sweden)

Marian Amengual-Pizarro

2017-11-01

Full Text Available This study examines test-takers’ views on a computer-delivered speaking test in order to investigate the aspects they consider most relevant in technology-based oral assessment, and to explore the main advantages and disadvantages computer-based tests may offer as compared to face-to-face speaking tests. A small-scale open questionnaire was administered to 80 test-takers who took the APTIS speaking test at the Universidad de Alcalá in April 2016. Results reveal that examinees believe computer-based tests provide a valid measure of oral competence in English and are considered to be an adequate method for the assessment of speaking. Interestingly, the data suggest that personal characteristics of test-takers seem to play a key role in deciding upon the most suitable and reliable delivery mode.

The accessibility of the Test of Academic Literacy for Postgraduate Students (TALPS: Student perceptions

Directory of Open Access Journals (Sweden)

Rambiritch, Avasha

2014-12-01

Full Text Available This paper focuses on the results of a questionnaire administered to students who wrote the Test of Academic Literacy for Postgraduate Students (TALPS between 2008 and 2010. The purpose of the questionnaire was to elicit information and reactions from test takers about the test. The paper begins by contextualising the problem of student success in higher education, outlining, as well, how a test such as TALPS can contribute positively to student success, before focusing specifically on the voices of the test takers in order to determine how accessible TALPS is to them. This contribution from the test takers is an important one, especially because responsible test developers cannot work in isolation, removed from those affected by the use of test scores. Applied linguists should strive to ensure that the tests they design and use are fair, socially acceptable, and have positive effects. This paper will illustrate that these concerns become important when one works within a framework that challenges test developers to consider questions related to every aspect of the test. In employing a framework that incorporates a concern for the empirical analyses of a test, as well as a concern for the social dimensions of language testing, one is compelled to give a voice to those often ignored, but most affected by the use of the test scores: the test takers. The data gathered will give test developers valuable insight into the feelings and opinions of test-takers.

Note-Taking Quality and Performance on an L2 Academic Listening Test

Science.gov (United States)

Song, Min-Young

2012-01-01

This study investigated the relationships among the quality of L2 test takers' notes evaluated in terms of different levels of information and test takers' performance on open-ended listening tasks tapping into different comprehension subskills. In addition, this study examined the invariance of the structural relationships among the variables…

Test Review: TestDaF

Science.gov (United States)

Norris, John; Drackert, Anastasia

2018-01-01

The Test of German as a Foreign Language (TestDaF) plays a critical role as a standardized test of German language proficiency. Developed and administered by the Society for Academic Study Preparation and Test Development (g.a.s.t.), TestDaF was launched in 2001 and has experienced persistent annual growth, with more than 44,000 test takers in…

At the Interface between Language Testing and Second Language Acquisition: Language Ability and Context of Learning

Science.gov (United States)

Gu, Lin

2014-01-01

This study investigated the relationship between latent components of academic English language ability and test takers' study-abroad and classroom learning experiences through a structural equation modeling approach in the context of TOEFL iBT® testing. Data from the TOEFL iBT public dataset were used. The results showed that test takers'…

Motivation and Test Anxiety in Test Performance across Three Testing Contexts: The CAEL, CET, and GEPT

Science.gov (United States)

Cheng, Liying; Klinger, Don; Fox, Janna; Doe, Christine; Jin, Yan; Wu, Jessica

2014-01-01

This study examined test-takers' motivation, test anxiety, and test performance across a range of social and educational contexts in three high-stakes language tests: the Canadian Academic English Language (CAEL) Assessment in Canada, the College English Test (CET) in the People's Republic of China, and the General English Proficiency Test (GEPT)…

Effects of Strength of Accent on an L2 Interactive Lecture Listening Comprehension Test

Science.gov (United States)

Ockey, Gary J.; Papageorgiou, Spiros; French, Robert

2016-01-01

This article reports on a study which aimed to determine the effect of strength of accent on listening comprehension of interactive lectures. Test takers (N = 21,726) listened to an interactive lecture given by one of nine speakers and responded to six comprehension items. The test taker responses were analyzed with the Rasch computer program…

In the company of givers and takers.

Science.gov (United States)

Grant, Adam

2013-04-01

Employees make decisions every day about whether to contribute to others--and their willingness to help is crucial to group and organizational effectiveness. But in a competitive, often zero-sum, world of work, generosity can be a dangerous path. How can leaders foster it without cutting into productivity, undermining fairness, and allowing employees to become doormats? The key, explains Wharton's Adam Grant, is to help givers reach a more nuanced understanding of what generosity is and is not. They'll be better positioned for sustainable giving when they can distinguish generosity from three attributes that often travel with it: timidity, availability, and empathy. Givers can overcome timidity, Grant says, by learning to act as agents--using "relational accounts" to advocate for others while negotiating for themselves. They can set boundaries on when, how, and whom to help. And they can strive to be perspective takers, not just empathizers, gathering knowledge about others that can lead to more-productive allocations of time that will benefit the organization as a whole.

Do Test Design and Uses Influence Test Preparation? Testing a Model of Washback with Structural Equation Modeling

Science.gov (United States)

Xie, Qin; Andrews, Stephen

2013-01-01

This study introduces Expectancy-value motivation theory to explain the paths of influences from perceptions of test design and uses to test preparation as a special case of washback on learning. Based on this theory, two conceptual models were proposed and tested via Structural Equation Modeling. Data collection involved over 870 test takers of…

To Show or Not to Show: The Effects of Item Stems and Answer Options on Performance on a Multiple-Choice Listening Comprehension Test

Science.gov (United States)

Yanagawa, Kozo; Green, Anthony

2008-01-01

The purpose of this study is to examine whether the choice between three multiple-choice listening comprehension test formats results in any difference in listening comprehension test performance. The three formats entail (a) allowing test takers to preview both the question stem and answer options prior to listening; (b) allowing test takers to…

A Closer Look at Chinese EFL Learners' Test-Wiseness Strategies in Reading Test

Science.gov (United States)

Haiyan, Miao; Rilong, Liu

2016-01-01

This paper reports on an investigation into the relationship of test-takers' use of test-wiseness strategies to Chinese EFL learners' reading test performance. A test-wiseness questionnaire was administered immediately after the final achievement test to probe into how learners thought while completing the reading section of the test. It was found…

STUDENT PLANNING TIME IN ORAL TESTS

Institute of Scientific and Technical Information of China (English)

WangLei

2004-01-01

This paper describes the process of planning in an oral test situation. Since many researchers have studied the impact of pretask planning in the Second Language Acquisition (SLA) field and some have explored the same subject into the area of oral tests, the present study tries to make a tentative attempt to see what the test takers are actually doing in the planning time while taking an oral test. A questionnaire was designed with the effort to find out whether planning time results in an increased focus on form, particularly at the level of strategic attention to form.The result of the investigation tells us that restricted by the type of situation, test takers can only plan the framework of what they are going to say, which may differ to the results achieved by previous studies.

A Method to Select Software Test Cases in Consideration of Past Input Sequence

International Nuclear Information System (INIS)

Kim, Hee Eun; Kim, Bo Gyung; Kang, Hyun Gook

2015-01-01

In the Korea Nuclear I and C Systems (KNICS) project, the software for the fully-digitalized reactor protection system (RPS) was developed under a strict procedure. Even though the behavior of the software is deterministic, the randomness of input sequence produces probabilistic behavior of software. A software failure occurs when some inputs to the software occur and interact with the internal state of the digital system to trigger a fault that was introduced into the software during the software lifecycle. In this paper, the method to select test set for software failure probability estimation is suggested. This test set reflects past input sequence of software, which covers all possible cases. In this study, the method to select test cases for software failure probability quantification was suggested. To obtain profile of paired state variables, relationships of the variables need to be considered. The effect of input from human operator also have to be considered. As an example, test set of PZR-PR-Lo-Trip logic was examined. This method provides framework for selecting test cases of safety-critical software

Walk a Mile in My Shoes: Stakeholder Accounts of Testing Experience with a Computer-Administered Test

Science.gov (United States)

Fox, Janna; Cheng, Liying

2015-01-01

In keeping with the trend to elicit multiple stakeholder responses to operational tests as part of test validation, this exploratory mixed methods study examines test-taker accounts of an Internet-based (i.e., computer-administered) test in the high-stakes context of proficiency testing for university admission. In 2013, as language testing…

Group Differences in Test-Taking Behaviour: An Example from a High-Stakes Testing Program

Science.gov (United States)

Stenlund, Tova; Eklöf, Hanna; Lyrén, Per-Erik

2017-01-01

This study investigated whether different groups of test-takers vary in their reported test-taking behaviour in a high-stakes test situation. A between-group design (N = 1129) was used to examine whether high and low achievers, as well as females and males, differ in their use of test-taking strategies, and in level of reported test anxiety and…

The Mediating Effect of Listening Metacognitive Awareness between Test-Taking Motivation and Listening Test Score: An Expectancy-Value Theory Approach.

Science.gov (United States)

Xu, Jian

2017-01-01

The present study investigated test-taking motivation in L2 listening testing context by applying Expectancy-Value Theory as the framework. Specifically, this study was intended to examine the complex relationships among expectancy, importance, interest, listening anxiety, listening metacognitive awareness, and listening test score using data from a large-scale and high-stakes language test among Chinese first-year undergraduates. Structural equation modeling was used to examine the mediating effect of listening metacognitive awareness on the relationship between expectancy, importance, interest, listening anxiety, and listening test score. According to the results, test takers' listening scores can be predicted by expectancy, interest, and listening anxiety significantly. The relationship between expectancy, interest, listening anxiety, and listening test score was mediated by listening metacognitive awareness. The findings have implications for test takers to improve their test taking motivation and listening metacognitive awareness, as well as for L2 teachers to intervene in L2 listening classrooms.

Testing instrument validity for LATE identification based on inequality moment constraints

DEFF Research Database (Denmark)

Huber, Martin; Mellace, Giovanni

2015-01-01

We derive testable implications of instrument validity in just identified treatment effect models with endogeneity and consider several tests. The identifying assumptions of the local average treatment effect allow us to both point identify and bound the mean potential outcomes (i) of the always...... takers under treatment and (ii) of the never takers under non-treatment. The point identified means must lie within their respective bounds, which provides us with four testable inequality moment constraints. Finally, we adapt our testing framework to the identification of distributional features....... A brief simulation study and an application to labor market data are also provided....

Overview of multi-input frequency domain modal testing methods with an emphasis on sine testing

Science.gov (United States)

Rost, Robert W.; Brown, David L.

1988-01-01

An overview of the current state of the art multiple-input, multiple-output modal testing technology is discussed. A very brief review of the current time domain methods is given. A detailed review of frequency and spatial domain methods is presented with an emphasis on sine testing.

Reactor protection system software test-case selection based on input-profile considering concurrent events and uncertainties

International Nuclear Information System (INIS)

Khalaquzzaman, M.; Lee, Seung Jun; Cho, Jaehyun; Jung, Wondea

2016-01-01

Recently, the input-profile-based testing for safety critical software has been proposed for determining the number of test cases and quantifying the failure probability of the software. Input-profile of a reactor protection system (RPS) software is the input which causes activation of the system for emergency shutdown of a reactor. This paper presents a method to determine the input-profile of a RPS software which considers concurrent events/transients. A deviation of a process parameter value begins through an event and increases owing to the concurrent multi-events depending on the correlation of process parameters and severity of incidents. A case of reactor trip caused by feedwater loss and main steam line break is simulated and analyzed to determine the RPS software input-profile and estimate the number of test cases. The different sizes of the main steam line breaks (e.g., small, medium, large break) with total loss of feedwater supply are considered in constructing the input-profile. The uncertainties of the simulation related to the input-profile-based software testing are also included. Our study is expected to provide an option to determine test cases and quantification of RPS software failure probability. (author)

Reading Test-taking Strategies in General Training IELTS

Directory of Open Access Journals (Sweden)

Vahede Nosrati

2015-10-01

Full Text Available The significance of gaining a better understanding of how test-taking strategies are used has been recognized by researchers. Considering this fact, this study aimed at investigating the test-taking strategies which were employed by IELTS candidates in reading comprehension test. Besides, it tried to take into account the differences among strategies used for different tasks. In order to gather data, two instruments were employed: the think-aloud protocol, and an IELTS reading test. The obtained data were analyzed and interpreted qualitatively by the researcher. The findings indicated that candidates employed 15 different strategies which were categorized in 3 stages, pre-reading, reading, and post-reading stages. Furthermore, it was revealed that test-takers used certain strategies differently, depending on the type of the task. The findings provide a better understanding of strategy use among IELTS candidates and help teachers to improve their approaches toward teaching and learning goals. Keywords: Test-taking Strategy, Test-taker, Reading Comprehension, Language Learning Strategy, IELTS

Learners Test Performance and Gardner`s MI Theory: Intercorrelation in a Bilingual Context

Directory of Open Access Journals (Sweden)

Bagher Azarmi

2012-05-01

Full Text Available Although decisions and inferences made based on test scores depend both on the characteristics of test takers and testing environment, the former seems to have the most overriding importance. The present study which was conducted in a bilingual environment is in line with this assumption and is aimed at investigating intelligence as one of the test taker characteristics. First, it aimed at finding the possible correlation between any of the eight types of intelligences in Gardner`s MI theory and EAP test performance. Second, it intended to survey the intercorrelation
among the eight types of intelligences themselves. To that end, 122 male bilingual EFL learners who were all sophomore university students were chosen as the participants of the study. They sat for the final EAP exam and filled the questionnaire on multiple intelligence. The test takers' scores on EAP exam were correlated with their multiple intelligences. The result did not demonstrate any statistically significant go-togetherness between EAP test performance and any types of intelligence; however, a significantly positive correlation was observed among the eight types of
intelligences themselves showing that all types of intelligences are equally important and ought to be equally dealt with in EFL context.

High Temperature Test Facility Preliminary RELAP5-3D Input Model Description

Energy Technology Data Exchange (ETDEWEB)

Bayless, Paul David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-12-01

A RELAP5-3D input model is being developed for the High Temperature Test Facility at Oregon State University. The current model is described in detail. Further refinements will be made to the model as final as-built drawings are released and when system characterization data are available for benchmarking the input model.

Less Truth Than Error: Massachusetts Teacher Tests

Directory of Open Access Journals (Sweden)

Walt Haney

1999-02-01

Full Text Available Scores on the Massachusetts Teacher Tests of reading and writing are highly unreliable. The tests' margin of error is close to double to triple the range found on well-developed tests. A person retaking the MTT several times could have huge fluctuations in their scores even if their skill level did not change significantly. In fact, the 9 to 17 point margin of error calculated for the tests represents more than 10 percent of the grading scale (assumed to be 0 to 100. The large margin of error means there is both a high false-pass rate and a high false-failure rate. For example, a person who received a score of 72 on the writing test could have scored an 89 or a 55 simply because of the unreliability of the test. Since adults' reading and writing skills do not change a great deal over several months, this range of scores on the same test should not be possible. While this test is being touted as an accurate assessment of a person's fitness to be a teacher, one would expect the scores to accurately reflect a test-taker's verbal ability level. In addition to the large margin of error, the MTT contain questionable content that make them poor tools for measuring test-takers' reading and writing skills. The content and lack of correlation between the reading and writing scores reduces the meaningfulness, or validity, of the tests. The validity is affected not just by the content, but by a host of factors, such as the conditions under which tests were administered and how they were scored. Interviews with a small sample of test-takers confirmed published reports concerning problems with the content and administration.

Learners Test Performance and Gardner`s Multiple Inteligence Theory: Intercorrelation in a Bilingual Context

Directory of Open Access Journals (Sweden)

Bagher Azarmi

2015-03-01

Full Text Available Although decisions and inferences made based on test scores depend both on the characteristics of test takers and testing environment, the former seems to have the most overridingimportance. The present study which was conducted in a bilingual environment is in line with this assumption and is aimed at investigating intelligence as one of the test taker characteristics. First, it aimed at finding the possible correlation between any of the eight types of intelligences in Gardner`s MI theory and EAP test performance. Second, it intended to survey the intercorrelationamong the eight types of intelligences themselves. To that end, 122 male bilingual EFL learners who were all sophomore university students were chosen as the participants of the study. They satfor the final EAP exam and filled the questionnaire on multiple intelligence. The test takers' scores on EAP exam were correlated with their multiple intelligences. The result did not demonstrate anystatistically significant go-togetherness between EAP test performance and any types of intelligence; however, a significantly positive correlation was observed among the eight types of intelligences themselves showing that all types of intelligences are equally important and ought to be equally dealt with in EFL context.

Do Standardized Tests Penalize Deep-Thinking, Creative, or Conscientious Students?: Some Personality Correlates of Graduate Record Examinations Test Scores

Science.gov (United States)

Powers, Donald E.; Kaufman, James C.

2004-01-01

The objective of the study reported here was to explore the relationship of Graduate Record Examinations (GRE) General Test scores to selected personality traits--conscientiousness, rationality, ingenuity, quickness, creativity, and depth. A sample of 342 GRE test takers completed short personality inventory scales for each trait. Analyses…

Tree-Based Global Model Tests for Polytomous Rasch Models

Science.gov (United States)

Komboz, Basil; Strobl, Carolin; Zeileis, Achim

2018-01-01

Psychometric measurement models are only valid if measurement invariance holds between test takers of different groups. Global model tests, such as the well-established likelihood ratio (LR) test, are sensitive to violations of measurement invariance, such as differential item functioning and differential step functioning. However, these…

Preliminary Test for Nonlinear Input Output Relations in SISO Systems

DEFF Research Database (Denmark)

Knudsen, Torben

2000-01-01

This paper discusses and develops preliminary statistical tests for detecting nonlinearities in the deterministic part of SISO systems with noise. The most referenced method is unreliable for common noise processes as e.g.\\ colored. Therefore two new methods based on superposition and sinus input...

Accountability Issues in Testing Academic Literacy: The Case of the Test of Academic Literacy for Postgraduate Students (TALPS)

Science.gov (United States)

Rambiritch, Avasha

2015-01-01

Applied linguists should strive to ensure that the tests they design and use are not only fair and socially acceptable, but also have positive effects--this, in light of the fact that tests can sometimes have far-reaching and often detrimental effects on test-takers. What this paper will attempt to do, is highlight how this concern for responsible…

A Method to Select Test Input Cases for Safety-critical Software

International Nuclear Information System (INIS)

Kim, Heeeun; Kang, Hyungook; Son, Hanseong

2013-01-01

This paper proposes a new testing methodology for effective and realistic quantification of RPS software failure probability. Software failure probability quantification is important factor in digital system safety assessment. In this study, the method for software test case generation is briefly described. The test cases generated by this method reflect the characteristics of safety-critical software and past inputs. Furthermore, the number of test cases can be reduced, but it is possible to perform exhaustive test. Aspect of software also can be reflected as failure data, so the final failure data can include the failure of software itself and external influences. Software reliability is generally accepted as the key factor in software quality since it quantifies software failures which can make a powerful system inoperative. In the KNITS (Korea Nuclear Instrumentation and Control Systems) project, the software for the fully digitalized reactor protection system (RPS) was developed under a strict procedure including unit testing and coverage measurement. Black box testing is one type of Verification and validation (V and V), in which given input values are entered and the resulting output values are compared against the expected output values. Programmable logic controllers (PLCs) were used in implementing critical systems and function block diagram (FBD) is a commonly used implementation language for PLC

Development of 20 kW input power coupler for 1.3 GHz ERL main linac. Component test at 30 kW IOT test stand

International Nuclear Information System (INIS)

Sakai, Hiroshi; Umemori, Kensei; Sakanaka, Shogo; Takahashi, Takeshi; Furuya, Takaaki; Shinoe, Kenji; Ishii, Atsushi; Nakamura, Norio; Sawamura, Masaru

2009-01-01

We started to develop an input coupler for a 1.3 GHz ERL superconducting cavity. Required input power is about 20 kW for the cavity acceleration field of 20 MV/m and the beam current of 100 mA in energy recovery operation. The input coupler is designed based on the STF-BL input coupler and some modifications are applied to the design for the CW 20 kW power operation. We fabricated input coupler components such as ceramic windows and bellows and carried out the high-power test of the components by using a 30 kW IOT power source and a test stand constructed for the highpower test. In this report, we mainly describe the results of the high-power test of ceramic window and bellows. (author)

A Critical Review of the IELTS Writing Test

Science.gov (United States)

Uysal, Hacer Hande

2010-01-01

Administered at local centres in 120 countries throughout the world, IELTS (International English Language Testing System) is one of the most widely used large-scale ESL tests that also offers a direct writing test component. Because of its popularity and its use for making critical decisions about test takers, it is crucial to draw attention to…

Input research and testing of code TOODY. Quarterly report, July--September 1971

International Nuclear Information System (INIS)

Haynie, G.A.

1997-01-01

The purpose of this report is to simplify and further explain input instructions for Code TOODY and to demonstrate the ability of the code to reproduce cylinder test results. This input is intended to be a supplement to, and not a replacement for, the existing TOODY manual. The TOODY manual should be read and understood before attempting to read this report. Problems arise in the preparation of the input data in four areas: material definition, initial shape definition, the restart feature, and the limiting of output. Aside from these areas, the code is adequately discussed in the manual, 'TOODY, A Computer Program For Calculating Problems Of Motion In Two Dimensions'

Optimal testing input sets for reduced diagnosis time of nuclear power plant digital electronic circuits

International Nuclear Information System (INIS)

Kim, D.S.; Seong, P.H.

1994-01-01

This paper describes the optimal testing input sets required for the fault diagnosis of the nuclear power plant digital electronic circuits. With the complicated systems such as very large scale integration (VLSI), nuclear power plant (NPP), and aircraft, testing is the major factor of the maintenance of the system. Particularly, diagnosis time grows quickly with the complexity of the component. In this research, for reduce diagnosis time the authors derived the optimal testing sets that are the minimal testing sets required for detecting the failure and for locating of the failed component. For reduced diagnosis time, the technique presented by Hayes fits best for the approach to testing sets generation among many conventional methods. However, this method has the following disadvantages: (a) it considers only the simple network (b) it concerns only whether the system is in failed state or not and does not provide the way to locate the failed component. Therefore the authors have derived the optimal testing input sets that resolve these problems by Hayes while preserving its advantages. When they applied the optimal testing sets to the automatic fault diagnosis system (AFDS) which incorporates the advanced fault diagnosis method of artificial intelligence technique, they found that the fault diagnosis using the optimal testing sets makes testing the digital electronic circuits much faster than that using exhaustive testing input sets; when they applied them to test the Universal (UV) Card which is a nuclear power plant digital input/output solid state protection system card, they reduced the testing time up to about 100 times

The Impact of Gender in Oral Proficiency Testing.

Science.gov (United States)

O'Loughlin, Kieran

2002-01-01

Discusses the role of gender in speaking tests and suggests that in oral interviews it is possible that both interviewing and rating may be highly gendered processes. Audiotaped female and male test-takers who undertook practice IELTS interviews, one with a female interviewer and once with a male interviewer. Results from discourse and test score…

High-power tests of a single-cell copper accelerating cavity driven by two input couplers

International Nuclear Information System (INIS)

Horan, D.; Bromberek, D.; Meyer, D.; Waldschmidt, G.

2008-01-01

High-power tests were conducted on a 350-MHz, single-cell copper accelerating cavity driven simultaneously by two H-loop input couplers for the purpose of determining the reliability, performance, and power-handling capability of the cavity and related components, which have routinely operated at 100-kW power levels. The test was carried out utilizing the APS 350-MHz RF Test Stand, which was modified to split the input rf power into two frac12-power feeds, each supplying power to a separate H-loop coupler on the cavity. Electromagnetic simulations of the two-coupler feed system were used to determine coupler match, peak cavity fields, and the effect of phasing errors between the coupler feed lines. The test was conducted up to a maximum total rf input power of 164-kW CW. Test apparatus details and performance data will be presented.

The Cognitive Processing of Candidates during Reading Tests: Evidence from Eye-Tracking

Science.gov (United States)

Bax, Stephen

2013-01-01

The research described in this article investigates test takers' cognitive processing while completing onscreen IELTS (International English Language Testing System) reading test items. The research aims, among other things, to contribute to our ability to evaluate the cognitive validity of reading test items (Glaser, 1991; Field, in press). The…

Improving Test-Taking Performance of Secondary At-Risk Youth and Students with Disabilities

Science.gov (United States)

Banks, Tachelle; Eaton, India

2014-01-01

Preparing at-risk youth and students with mild disabilities for state and district tests is important for improving their test performance, and basic instruction in test preparation can significantly improve student test performance. The article defines noncognitive variables that adversely affect test-taker performance. The article also describes…

Item Response Theory Models for Performance Decline during Testing

Science.gov (United States)

Jin, Kuan-Yu; Wang, Wen-Chung

2014-01-01

Sometimes, test-takers may not be able to attempt all items to the best of their ability (with full effort) due to personal factors (e.g., low motivation) or testing conditions (e.g., time limit), resulting in poor performances on certain items, especially those located toward the end of a test. Standard item response theory (IRT) models fail to…

The Relative Importance of Persons, Items, Subtests, and Languages to TOEFL Test Variance.

Science.gov (United States)

Brown, James Dean

1999-01-01

Explored the relative contributions to Test of English as a Foreign Language (TOEFL) score dependability of various numbers of persons, items, subtests, languages, and their various interactions. Sampled 15,000 test takers, 1000 each from 15 different language backgrounds. (Author/VWL)

An Investigation of How the Channel of Input and Access to Test Questions Affect L2 Listening Test Performance

Science.gov (United States)

Wagner, Elvis

2013-01-01

The use of video technology has become widespread in the teaching and testing of second-language (L2) listening, yet research into how this technology affects the learning and testing process has lagged. The current study investigated how the channel of input (audiovisual vs. audio-only) used on an L2 listening test affected test-taker…

On the issue of item selection in computerized adaptive testing with response times

NARCIS (Netherlands)

Veldkamp, Bernard P.

2016-01-01

Many standardized tests are now administered via computer rather than paper-and-pencil format. The computer-based delivery mode brings with it certain advantages. One advantage is the ability to adapt the difficulty level of the test to the ability level of the test taker in what has been termed

Transitioning the GED[R] Mathematics Test to Computer with and without Accommodations: A Pilot Project

Science.gov (United States)

Patterson, Margaret Becker; Higgins, Jennifer; Bozman, Martha; Katz, Michael

2011-01-01

We conducted a pilot study to see how the GED Mathematics Test could be administered on computer with embedded accessibility tools. We examined test scores and test-taker experience. Nineteen GED test centers across five states and 216 randomly assigned GED Tests candidates participated in the project. GED candidates completed two GED mathematics…

User input verification and test driven development in the NJOY21 nuclear data processing code

Energy Technology Data Exchange (ETDEWEB)

Trainer, Amelia Jo [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Conlin, Jeremy Lloyd [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); McCartney, Austin Paul [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-08-21

Before physically-meaningful data can be used in nuclear simulation codes, the data must be interpreted and manipulated by a nuclear data processing code so as to extract the relevant quantities (e.g. cross sections and angular distributions). Perhaps the most popular and widely-trusted of these processing codes is NJOY, which has been developed and improved over the course of 10 major releases since its creation at Los Alamos National Laboratory in the mid-1970’s. The current phase of NJOY development is the creation of NJOY21, which will be a vast improvement from its predecessor, NJOY2016. Designed to be fast, intuitive, accessible, and capable of handling both established and modern formats of nuclear data, NJOY21 will address many issues that many NJOY users face, while remaining functional for those who prefer the existing format. Although early in its development, NJOY21 is quickly providing input validation to check user input. By providing rapid and helpful responses to users while writing input files, NJOY21 will prove to be more intuitive and easy to use than any of its predecessors. Furthermore, during its development, NJOY21 is subject to regular testing, such that its test coverage must strictly increase with the addition of any production code. This thorough testing will allow developers and NJOY users to establish confidence in NJOY21 as it gains functionality. This document serves as a discussion regarding the current state input checking and testing practices of NJOY21.

Investigating the Construct Measured by Banked Gap-Fill Items: Evidence from Eye-Tracking

Science.gov (United States)

McCray, Gareth; Brunfaut, Tineke

2018-01-01

This study investigates test-takers' processing while completing banked gap-fill tasks, designed to test reading proficiency, in order to test theoretically based expectations about the variation in cognitive processes of test-takers across levels of performance. Twenty-eight test-takers' eye traces on 24 banked gap-fill items (on six tasks) were…

The Effect of "Read-Aloud" as a Test Accommodation for Students with Visual Impairments in South Korea

Science.gov (United States)

Kim, Jung Sook

2012-01-01

Arguing the issue of fairness and the additional advantage for test takers with visual impairments, some professionals have expressed negative attitudes toward test accommodation. However, researchers have found that the validity of test accommodations increases when the test scores of students who need a particular accommodation increases, while…

An Investigation of the Gender Differential Performance on a High-Stakes Language Proficiency Test in Iran

Science.gov (United States)

Karami, Hossein

2013-01-01

There has been a growing consensus among the educational measurement experts and psychometricians that test taker characteristics may unduly affect the performance on tests. This may lead to construct-irrelevant variance in the scores and thus render the test biased. Hence, it is incumbent on test developers and users alike to provide evidence…

Test for Nonlinear Input Output Relations in SISO Systems by Preliminary Data Analysis

DEFF Research Database (Denmark)

Knudsen, Torben

2000-01-01

This paper discusses and develops preliminary statistical tests for detecting nonlinearities in the deterministic part of SISO systems with noise. The most referenced method is unreliable for common noise processes as e.g.\\ colored. Therefore two new methods based on superposition and sinus input...

Testing accelerometer rectification error caused by multidimensional composite inputs with double turntable centrifuge.

Science.gov (United States)

Guan, W; Meng, X F; Dong, X M

2014-12-01

Rectification error is a critical characteristic of inertial accelerometers. Accelerometers working in operational situations are stimulated by composite inputs, including constant acceleration and vibration, from multiple directions. However, traditional methods for evaluating rectification error only use one-dimensional vibration. In this paper, a double turntable centrifuge (DTC) was utilized to produce the constant acceleration and vibration simultaneously and we tested the rectification error due to the composite accelerations. At first, we deduced the expression of the rectification error with the output of the DTC and a static model of the single-axis pendulous accelerometer under test. Theoretical investigation and analysis were carried out in accordance with the rectification error model. Then a detailed experimental procedure and testing results were described. We measured the rectification error with various constant accelerations at different frequencies and amplitudes of the vibration. The experimental results showed the distinguished characteristics of the rectification error caused by the composite accelerations. The linear relation between the constant acceleration and the rectification error was proved. The experimental procedure and results presented in this context can be referenced for the investigation of the characteristics of accelerometer with multiple inputs.

The relationship between Test Takers’ Multiple Intelligences and Their Performance on the Reading Sections of TOEFL and IELTS

Directory of Open Access Journals (Sweden)

Minoo Alemi

2010-04-01

Full Text Available The present study aimed at investigating the hypothetical relationship between the multiple intelligences of test takers and their performance on the reading sections of TOEFL and IELTS. Howard Gardner’s theory of multiple intelligences suggests that intelligence is not a single and solely inborn capacity, rather a multiple construct which is only partly genetic, and can be crystallized or paralyzed over one’s lifetime. Based on the theory, there are eight types of intelligence: linguistic, mathematical, musical, bodily, spatial, intrapersonal, interpersonal and naturalist, but the list is not exhaustive. The multiple intelligences of test takers were estimated by means of MIDAS, the Multiple Intelligences Developmental Assessment Scales, developed by Shearer (1994. Subsequently, the bias detection for the reading section of TOEFL was carried out on 90 participants, and this subtest was found to correlate positively with linguistic and logical intelligences. By the same token, 89 out of the 163 participants in the study were included in the analysis of the relationship between the multiple intelligences of test takers and their performance on the reading section of IELTS, and this test proved biased toward linguistic and spatial intelligences. The implications concern the inadequacy of the definition of language proficiency .Moreover, Measurement-Driven Instruction courses and preparatory materials of the two proficiency tests, TOEFL and IELTS, can benefit from the results of the study by being designed in such a way as to represent the intelligences which are positively correlated with performance on the tests in question.

Control method for multi-input multi-output non-Gaussian random vibration test with cross spectra consideration

Directory of Open Access Journals (Sweden)

Ronghui ZHENG

2017-12-01

Full Text Available A control method for Multi-Input Multi-Output (MIMO non-Gaussian random vibration test with cross spectra consideration is proposed in the paper. The aim of the proposed control method is to replicate the specified references composed of auto spectral densities, cross spectral densities and kurtoses on the test article in the laboratory. It is found that the cross spectral densities will bring intractable coupling problems and induce difficulty for the control of the multi-output kurtoses. Hence, a sequential phase modification method is put forward to solve the coupling problems in multi-input multi-output non-Gaussian random vibration test. To achieve the specified responses, an improved zero memory nonlinear transformation is utilized first to modify the Fourier phases of the signals with sequential phase modification method to obtain one frame reference response signals which satisfy the reference spectra and reference kurtoses. Then, an inverse system method is used in frequency domain to obtain the continuous stationary drive signals. At the same time, the matrix power control algorithm is utilized to control the spectra and kurtoses of the response signals further. At the end of the paper, a simulation example with a cantilever beam and a vibration shaker test are implemented and the results support the proposed method very well. Keywords: Cross spectra, Kurtosis control, Multi-input multi-output, Non-Gaussian, Random vibration test

Test-Taking Strategies and Task-based Assessment: The Case of Iranian EFL Learners

Directory of Open Access Journals (Sweden)

Hossein Barati

2012-01-01

Full Text Available The present study examined the effect of task-based assessment on the type and frequency of test-taking strategies that three proficiency groups of Iranian adult EFL learners used when completing the First Certificate in English FCE reading paper. A total of 70 EFL university undergraduates (53 females and 17 males took part in the main phase of this study. They were divided into three proficiency groups: high, intermediate, and low. A set of Chi-square analyses was used to explore the type and frequency of test-taking strategies used by participants. The results suggested that the intermediate group test takers used the strategies significantly different after completing each task (sub-test in the FCE reading paper. However, the high and low proficient test takers› use of strategies was only significant after completing the third task of the FCE reading paper. The findings also revealed that a pattern could be drawn of the type of strategies used by the three proficiency groups who participated in this study. Nonetheless, such a pattern shifted at times depending on the ability of the test takers and/or the task under study.

Total dose induced increase in input offset voltage in JFET input operational amplifiers

International Nuclear Information System (INIS)

Pease, R.L.; Krieg, J.; Gehlhausen, M.; Black, J.

1999-01-01

Four different types of commercial JFET input operational amplifiers were irradiated with ionizing radiation under a variety of test conditions. All experienced significant increases in input offset voltage (Vos). Microprobe measurement of the electrical characteristics of the de-coupled input JFETs demonstrates that the increase in Vos is a result of the mismatch of the degraded JFETs. (authors)

Facilitating the Interpretation of English Language Proficiency Scores: Combining Scale Anchoring and Test Score Mapping Methodologies

Science.gov (United States)

Powers, Donald; Schedl, Mary; Papageorgiou, Spiros

2017-01-01

The aim of this study was to develop, for the benefit of both test takers and test score users, enhanced "TOEFL ITP"® test score reports that go beyond the simple numerical scores that are currently reported. To do so, we applied traditional scale anchoring (proficiency scaling) to item difficulty data in order to develop performance…

Test-Taking Strategies in L2 Assessment: The Test of English for International Communication Speaking Test.

Science.gov (United States)

Huang, Heng-Tsung Danny

2016-08-01

This research explored the test-taking strategies associated with the Test of English for International Communication Speaking Test (TOEIC-S) and their relationship with test performance. Capitalizing on two sets of TOEIC-S and a custom-made strategy inventory, the researcher collected data from a total of 215 Taiwanese English learners consisting of 84 males and 131 females with an average age of 20.1 years (SD = 2.6). Quantitative data analysis gave rise to three major findings. First, TOEIC-S test-taking strategy use constituted a multi-faceted construct that involved multiple types of strategic behaviors. Second, these strategic behaviors matched those allowing test-takers to communicate both in real life and in the workplace. Third, communication strategy use and cognitive strategy use both contributed significantly to TOEIC-S performance. © The Author(s) 2016.

KNOWLEDGE AND PRACTICES AMONGST HEALTH CARE PROVIDERS & CARE TAKERS REGARDING MANAGEMENT OF CHILDHOOD DIARRHOEA IN DEMONSTRATION DISTRICTS OF GUJARAT

Directory of Open Access Journals (Sweden)

Rupani Mihir

2015-12-01

Full Text Available Introduction:Diarrhoea Alleviation through Zinc and ORS Therapy (DAZT project was started in 6 demonstration districtsof Gujarat in 2011. Rationale: In addition to poor feeding/hygiene practices of caretakers, inappropriate prescription from providers and inadequate use of Zinc-ORS are challenges in diarrhoea management. Objectives:To understand prescription practices for childhood diarrhoea, assess knowledge about zinc therapy among health care providers & caretakers in the government/private sectors &assess knowledge about additional information to be provided to caretakersamong health care providers& its practice among care takers. Materials & Methods:Information was collected onstructured questionnaires by interviews of 127care providers&43 care takersin 6 districts.In addition, case records were reviewed for 228 prescriptions – all from government sector. Data collected was entered and analyzedusing Excel. Results:Based on records/interviews, government functionaries dispensed ORS in 97%& zinc in 90% cases of diarrhoea while, private providers prescribed itin 79% &71% respectively. Antibiotics were prescribed in 24% & 59%, anti-amoebic in 20.2% &64.7% in public& private sectors respectively.Knowledge of dosage and duration of zinc therapy was better among public sector providers than private sector ones. Amongst caretakers, 74.4% gave correct dose of zinc to their children but was given for 14 days in 67.4% of cases; common reasons for non-compliance were“improved condition”&“no need to continue”. Foradditional information, such as advice on continued feeding, giving more than usual fluid,hand washing& when to return back to health facility, the responses were better for government providers than private ones. Knowledge about this additional information was also poor amongst care takers. Conclusions:For all the parameters studied, responses were better amongst government providers than those from private sector. Demand

SSYST-3. Input description

International Nuclear Information System (INIS)

Meyder, R.

1983-12-01

The code system SSYST-3 is designed to analyse the thermal and mechanical behaviour of a fuel rod during a LOCA. The report contains a complete input-list for all modules and several tested inputs for a LOCA analysis. (orig.)

Skilled but Unaware of It: CAT Undermines a Test Taker's Metacognitive Competence

Science.gov (United States)

Ortner, Tuulia M.; Weisskopf, Eva; Gerstenberg, Friederike X. R.

2013-01-01

We investigated students' metacognitive experiences with regard to feelings of difficulty (FD), feelings of satisfaction (FS), and estimate of effort (EE), employing either computerized adaptive testing (CAT) or computerized fixed item testing (FIT). In an experimental approach, 174 students in grades 10 to 13 were tested either with a CAT or a…

Using response-time constraints in item selection to control for differential speededness in computerized adaptive testing

NARCIS (Netherlands)

van der Linden, Willem J.; Scrams, David J.; Schnipke, Deborah L.

2003-01-01

This paper proposes an item selection algorithm that can be used to neutralize the effect of time limits in computer adaptive testing. The method is based on a statistical model for the response-time distributions of the test takers on the items in the pool that is updated each time a new item has

Exploring the Effect of Teaching Test-Taking Strategies on Intermediate Level Learners on Reading Section of IELTS; Learners' Attitude in Focus

Science.gov (United States)

Khoshsima, Hooshang; Saed, Amin; Mousaei, Fatemeh

2018-01-01

Language proficiency tests have become common instruments to judge people based on their performance. Thus, the scores on language proficiency tests, such as the International English Language Testing System (IELTS) or Teaching English as a Foreign Language (TOEFL), play a crucial role in the test-takers' lives. Because of increasing demands on…

The impacts of computer adaptive testing from a variety of perspectives

Directory of Open Access Journals (Sweden)

Tetsuo Kimura

2017-05-01

Full Text Available Computer adaptive testing (CAT is a kind of tailored testing, in that it is a form of computer-based testing that is adaptive to each test-taker’s ability level. In this review, the impacts of CAT are discussed from different perspectives in order to illustrate crucial points to keep in mind during the development and implementation of CAT. Test developers and psychometricians often emphasize the efficiency and accuracy of CAT in comparison to traditional linear tests. However, many test-takers report feeling discouraged after taking CATs, and this feeling can reduce learning self-efficacy and motivation. A trade-off must be made between the psychological experiences of test-takers and measurement efficiency. From the perspective of educators and subject matter experts, nonstatistical specifications, such as content coverage, content balance, and form length are major concerns. Thus, accreditation bodies may be faced with a discrepancy between the perspectives of psychometricians and those of subject matter experts. In order to improve test-takers’ impressions of CAT, the author proposes increasing the target probability of answering correctly in the item selection algorithm even if doing so consequently decreases measurement efficiency. Two different methods, CAT with a shadow test approach and computerized multistage testing, have been developed in order to ensure the satisfaction of subject matter experts. In the shadow test approach, a full-length test is assembled that meets the constraints and provides maximum information at the current ability estimate, while computerized multistage testing gives subject matter experts an opportunity to review all test forms prior to administration.

Gaze Behavior in a Natural Environment with a Task-Relevant Distractor: How the Presence of a Goalkeeper Distracts the Penalty Taker

Directory of Open Access Journals (Sweden)

Johannes Kurz

2018-01-01

Full Text Available Gaze behavior in natural scenes has been shown to be influenced not only by top–down factors such as task demands and action goals but also by bottom–up factors such as stimulus salience and scene context. Whereas gaze behavior in the context of static pictures emphasizes spatial accuracy, gazing in natural scenes seems to rely more on where to direct the gaze involving both anticipative components and an evaluation of ongoing actions. Not much is known about gaze behavior in far-aiming tasks in which multiple task-relevant targets and distractors compete for the allocation of visual attention via gaze. In the present study, we examined gaze behavior in the far-aiming task of taking a soccer penalty. This task contains a proximal target, the ball; a distal target, an empty location within the goal; and a salient distractor, the goalkeeper. Our aim was to investigate where participants direct their gaze in a natural environment with multiple potential fixation targets that differ in task relevance and salience. Results showed that the early phase of the run-up seems to be driven by both the salience of the stimulus setting and the need to perform a spatial calibration of the environment. The late run-up, in contrast, seems to be controlled by attentional demands of the task with penalty takers having habitualized a visual routine that is not disrupted by external influences (e.g., the goalkeeper. In addition, when trying to shoot a ball as accurately as possible, penalty takers directed their gaze toward the ball in order to achieve optimal foot-ball contact. These results indicate that whether gaze is driven by salience of the stimulus setting or by attentional demands depends on the phase of the actual task.

Using Whole-House Field Tests to Empirically Derive Moisture Buffering Model Inputs

Energy Technology Data Exchange (ETDEWEB)

Woods, J.; Winkler, J.; Christensen, D.; Hancock, E.

2014-08-01

Building energy simulations can be used to predict a building's interior conditions, along with the energy use associated with keeping these conditions comfortable. These models simulate the loads on the building (e.g., internal gains, envelope heat transfer), determine the operation of the space conditioning equipment, and then calculate the building's temperature and humidity throughout the year. The indoor temperature and humidity are affected not only by the loads and the space conditioning equipment, but also by the capacitance of the building materials, which buffer changes in temperature and humidity. This research developed an empirical method to extract whole-house model inputs for use with a more accurate moisture capacitance model (the effective moisture penetration depth model). The experimental approach was to subject the materials in the house to a square-wave relative humidity profile, measure all of the moisture transfer terms (e.g., infiltration, air conditioner condensate) and calculate the only unmeasured term: the moisture absorption into the materials. After validating the method with laboratory measurements, we performed the tests in a field house. A least-squares fit of an analytical solution to the measured moisture absorption curves was used to determine the three independent model parameters representing the moisture buffering potential of this house and its furnishings. Follow on tests with realistic latent and sensible loads showed good agreement with the derived parameters, especially compared to the commonly-used effective capacitance approach. These results show that the EMPD model, once the inputs are known, is an accurate moisture buffering model.

Stakeholders' Beliefs about the "TOEFL iBT"® Test as a Measure of Academic Language Ability. "TOEFL iBT"® Research Report. TOEFL iBT-22. ETS Research Report. RR-14-42

Science.gov (United States)

Malone, Margaret E.; Montee, Megan

2014-01-01

The "TOEFL iBT"® test presents test takers with tasks meant to simulate the tasks required of students in English-medium universities. Research establishing the validity argument for the test provides evidence for score interpretation and the use of the test for university admissions and placement. Now that the test has been operational…

F-18 High Alpha Research Vehicle (HARV) parameter identification flight test maneuvers for optimal input design validation and lateral control effectiveness

Science.gov (United States)

Morelli, Eugene A.

1995-01-01

Flight test maneuvers are specified for the F-18 High Alpha Research Vehicle (HARV). The maneuvers were designed for open loop parameter identification purposes, specifically for optimal input design validation at 5 degrees angle of attack, identification of individual strake effectiveness at 40 and 50 degrees angle of attack, and study of lateral dynamics and lateral control effectiveness at 40 and 50 degrees angle of attack. Each maneuver is to be realized by applying square wave inputs to specific control effectors using the On-Board Excitation System (OBES). Maneuver descriptions and complete specifications of the time/amplitude points define each input are included, along with plots of the input time histories.

Evaluating the "TOEFL Junior"® Standard Test as a Measure of Progress for Young English Language Learners. Research Report. ETS RR-15-22

Science.gov (United States)

Gu, Lin; Lockwood, John; Powers, Donald E.

2015-01-01

Standardized tests are often designed to provide only a snapshot of test takers' knowledge, skills, or abilities at a single point in time. Sometimes, however, they are expected to serve more demanding functions, one of them is assessing change in knowledge, skills, or ability over time because of learning effects.The latter is the case for the…

Examining the Impact of L2 Proficiency and Keyboarding Skills on Scores on TOEFL-iBT Writing Tasks

Science.gov (United States)

Barkaoui, Khaled

2014-01-01

A major concern with computer-based (CB) tests of second-language (L2) writing is that performance on such tests may be influenced by test-taker keyboarding skills. Poor keyboarding skills may force test-takers to focus their attention and cognitive resources on motor activities (i.e., keyboarding) and, consequently, other processes and aspects of…

Investigating Differences between American and Indian Raters in Assessing TOEFL iBT Speaking Tasks

Science.gov (United States)

Wei, Jing; Llosa, Lorena

2015-01-01

This article reports on an investigation of the role raters' language background plays in raters' assessment of test takers' speaking ability. Specifically, this article examines differences between American and Indian raters in their scores and scoring processes when rating Indian test takers' responses to the Test of English as a Foreign…

Input-profile-based software failure probability quantification for safety signal generation systems

International Nuclear Information System (INIS)

Kang, Hyun Gook; Lim, Ho Gon; Lee, Ho Jung; Kim, Man Cheol; Jang, Seung Cheol

2009-01-01

The approaches for software failure probability estimation are mainly based on the results of testing. Test cases represent the inputs, which are encountered in an actual use. The test inputs for the safety-critical application such as a reactor protection system (RPS) of a nuclear power plant are the inputs which cause the activation of protective action such as a reactor trip. A digital system treats inputs from instrumentation sensors as discrete digital values by using an analog-to-digital converter. Input profile must be determined in consideration of these characteristics for effective software failure probability quantification. Another important characteristic of software testing is that we do not have to repeat the test for the same input value since the software response is deterministic for each specific digital input. With these considerations, we propose an effective software testing method for quantifying the failure probability. As an example application, the input profile of the digital RPS is developed based on the typical plant data. The proposed method in this study is expected to provide a simple but realistic mean to quantify the software failure probability based on input profile and system dynamics.

Does Input Enhancement Work for Learning Politeness Strategies?

Science.gov (United States)

Khatib, Mohammad; Safari, Mahmood

2013-01-01

The present study investigated the effect of input enhancement on the acquisition of English politeness strategies by intermediate EFL learners. Two groups of freshman English majors were randomly assigned to the experimental (enhanced input) group and the control (mere exposure) group. Initially, a TOEFL test and a discourse completion test (DCT)…

AN ANALYSIS OF ILLOCUTIONARY ACTS AND IMPLICATURES IN UNDERSTANDING TOEFL SHORT CONVERSATION

Directory of Open Access Journals (Sweden)

Desi Tri Cahyaningati

2012-06-01

Full Text Available Listening comprehension is found to be among the most difficult tasks for the learners due to several reasons. Mostly, test-takers find difficulty in interpreting the intended meaning of the utterances in the TOEFL examination. To understand the intended meaning which is implied in and beyond the utterance itself, the test takers must have background knowledge of the context of the utterances. Based on the problems faced by the test takers above, this study gives some solutions in understanding the short conversation in TOEFL so they can draw conclusion of the intended meanings. The writer uses illocutionary acts and implicatures in analyzing the problems found in TOEFL short conversation. Based on the analysis, this study concludes that TOEFL short conversations consist of four illocutionary acts classifications of five. There are Directive, Expressive, Assertive and Commisive. Most of the illocutionary acts found in TOEFL short conversations are directive, assertive and expressive. Meanwhile, Commisive is sometimes found in TOEFL short conversations. This study also gets the data of the implicatures on the utterance in TOEFL short conversations. There are some implicatures that can help the test takers in understanding the intended meaning of the utterance in TOEFL short conversations. Thus to understand the intended meaning on the utterances, the test takers can interpret the meaning by applying the illocutionary act theory and the implicatures. The illocutionary will help the test taker to identify the types of the utterance and then can understand the intended meaning of the utterance. The implicatures will explain what a speaker can imply, suggest, or mean, as different from what the speaker literally says

Computer Generated Inputs for NMIS Processor Verification

International Nuclear Information System (INIS)

J. A. Mullens; J. E. Breeding; J. A. McEvers; R. W. Wysor; L. G. Chiang; J. R. Lenarduzzi; J. T. Mihalczo; J. K. Mattingly

2001-01-01

Proper operation of the Nuclear Identification Materials System (NMIS) processor can be verified using computer-generated inputs [BIST (Built-In-Self-Test)] at the digital inputs. Preselected sequences of input pulses to all channels with known correlation functions are compared to the output of the processor. These types of verifications have been utilized in NMIS type correlation processors at the Oak Ridge National Laboratory since 1984. The use of this test confirmed a malfunction in a NMIS processor at the All-Russian Scientific Research Institute of Experimental Physics (VNIIEF) in 1998. The NMIS processor boards were returned to the U.S. for repair and subsequently used in NMIS passive and active measurements with Pu at VNIIEF in 1999

Keeping Your Audience in Mind: Applying Audience Analysis to the Design of Interactive Score Reports

Science.gov (United States)

Zapata-Rivera, Juan Diego; Katz, Irvin R.

2014-01-01

Score reports have one or more intended audiences: the people who use the reports to make decisions about test takers, including teachers, administrators, parents and test takers. Attention to audience when designing a score report supports assessment validity by increasing the likelihood that score users will interpret and use assessment results…

Two improved methods for testing ADC parametric faults by digital input signals

NARCIS (Netherlands)

Sheng, Xiaoqin; Kerkhoff, Hans G.

2009-01-01

In this paper, two improved methods are presented extending our previous work. The first one improves the results by adjusting the voltage levels of the input pulse wave stimulus. Compared with the sine wave input stimulus, the four-level pulse wave can detect even more faulty cases with the offset

Statistical identification of effective input variables

International Nuclear Information System (INIS)

Vaurio, J.K.

1982-09-01

A statistical sensitivity analysis procedure has been developed for ranking the input data of large computer codes in the order of sensitivity-importance. The method is economical for large codes with many input variables, since it uses a relatively small number of computer runs. No prior judgemental elimination of input variables is needed. The sceening method is based on stagewise correlation and extensive regression analysis of output values calculated with selected input value combinations. The regression process deals with multivariate nonlinear functions, and statistical tests are also available for identifying input variables that contribute to threshold effects, i.e., discontinuities in the output variables. A computer code SCREEN has been developed for implementing the screening techniques. The efficiency has been demonstrated by several examples and applied to a fast reactor safety analysis code (Venus-II). However, the methods and the coding are general and not limited to such applications

C-TOC (Cognitive Testing on Computer): investigating the usability and validity of a novel self-administered cognitive assessment tool in aging and early dementia.

Science.gov (United States)

Jacova, Claudia; McGrenere, Joanna; Lee, Hyunsoo S; Wang, William W; Le Huray, Sarah; Corenblith, Emily F; Brehmer, Matthew; Tang, Charlotte; Hayden, Sherri; Beattie, B Lynn; Hsiung, Ging-Yuek R

2015-01-01

Cognitive Testing on Computer (C-TOC) is a novel computer-based test battery developed to improve both usability and validity in the computerized assessment of cognitive function in older adults. C-TOC's usability was evaluated concurrently with its iterative development to version 4 in subjects with and without cognitive impairment, and health professional advisors representing different ethnocultural groups. C-TOC version 4 was then validated against neuropsychological tests (NPTs), and by comparing performance scores of subjects with normal cognition, Cognitive Impairment Not Dementia (CIND) and Alzheimer disease. C-TOC's language tests were validated in subjects with aphasic disorders. The most important usability issue that emerged from consultations with 27 older adults and with 8 cultural advisors was the test-takers' understanding of the task, particularly executive function tasks. User interface features did not pose significant problems. C-TOC version 4 tests correlated with comparator NPT (r=0.4 to 0.7). C-TOC test scores were normal (n=16)>CIND (n=16)>Alzheimer disease (n=6). All normal/CIND NPT performance differences were detected on C-TOC. Low computer knowledge adversely affected test performance, particularly in CIND. C-TOC detected impairments in aphasic disorders (n=11). In general, C-TOC had good validity in detecting cognitive impairment. Ensuring test-takers' understanding of the tasks, and considering their computer knowledge appear important steps towards C-TOC's implementation.

The Mediating Effect of Listening Metacognitive Awareness between Test-Taking Motivation and Listening Test Score: An Expectancy-Value Theory Approach

Directory of Open Access Journals (Sweden)

Jian Xu

2017-12-01

Full Text Available The present study investigated test-taking motivation in L2 listening testing context by applying Expectancy-Value Theory as the framework. Specifically, this study was intended to examine the complex relationships among expectancy, importance, interest, listening anxiety, listening metacognitive awareness, and listening test score using data from a large-scale and high-stakes language test among Chinese first-year undergraduates. Structural equation modeling was used to examine the mediating effect of listening metacognitive awareness on the relationship between expectancy, importance, interest, listening anxiety, and listening test score. According to the results, test takers’ listening scores can be predicted by expectancy, interest, and listening anxiety significantly. The relationship between expectancy, interest, listening anxiety, and listening test score was mediated by listening metacognitive awareness. The findings have implications for test takers to improve their test taking motivation and listening metacognitive awareness, as well as for L2 teachers to intervene in L2 listening classrooms.

Measuring Input Thresholds on an Existing Board

Science.gov (United States)

Kuperman, Igor; Gutrich, Daniel G.; Berkun, Andrew C.

2011-01-01

A critical PECL (positive emitter-coupled logic) interface to Xilinx interface needed to be changed on an existing flight board. The new Xilinx input interface used a CMOS (complementary metal-oxide semiconductor) type of input, and the driver could meet its thresholds typically, but not in worst-case, according to the data sheet. The previous interface had been based on comparison with an external reference, but the CMOS input is based on comparison with an internal divider from the power supply. A way to measure what the exact input threshold was for this device for 64 inputs on a flight board was needed. The measurement technique allowed an accurate measurement of the voltage required to switch a Xilinx input from high to low for each of the 64 lines, while only probing two of them. Directly driving an external voltage was considered too risky, and tests done on any other unit could not be used to qualify the flight board. The two lines directly probed gave an absolute voltage threshold calibration, while data collected on the remaining 62 lines without probing gave relative measurements that could be used to identify any outliers. The PECL interface was forced to a long-period square wave by driving a saturated square wave into the ADC (analog to digital converter). The active pull-down circuit was turned off, causing each line to rise rapidly and fall slowly according to the input s weak pull-down circuitry. The fall time shows up as a change in the pulse width of the signal ready by the Xilinx. This change in pulse width is a function of capacitance, pulldown current, and input threshold. Capacitance was known from the different trace lengths, plus a gate input capacitance, which is the same for all inputs. The pull-down current is the same for all inputs including the two that are probed directly. The data was combined, and the Excel solver tool was used to find input thresholds for the 62 lines. This was repeated over different supply voltages and

Pricing Energy and Ancillary Services in a Day-Ahead Market for a Price-Taker Hydro Generating Company Using a Risk-Constrained Approach

Directory of Open Access Journals (Sweden)

Perica Ilak

2014-04-01

Full Text Available This paper analyzes a price-taker hydro generating company which participates simultaneously in day-ahead energy and ancillary services markets. An approach for deriving marginal cost curves for energy and ancillary services is proposed, taking into consideration price uncertainty and opportunity cost of water, which can later be used to determine hourly bid curves. The proposed approach combines an hourly conditional value-at-risk, probability of occurrence of automatic generation control states and an opportunity cost of water to determine energy and ancillary services marginal cost curves. The proposed approach is in a linear constraint form and is easy to implement in optimization problems. A stochastic model of the hydro-economic river basin is presented, based on the actual Vinodol hydropower system in Croatia, with a complex three-dimensional relationship between the power produced, the discharged water, and the head of associated reservoir.

Between system maker and privileges taker: the role of China in the Greater Mekong Sub-region

Directory of Open Access Journals (Sweden)

Truong-Minh Vu

2014-01-01

Full Text Available Utilizing China's leadership projects in the Great Mekong Sub-Region (GMS as a case study, this paper aims to investigate whether China qualifies as an international leader. This work argues that its geographic position and economic rise allow China to be a "system maker and privilege taker," which is a dual role forming in economic-political relations in the GMS in the last ten years. China is among major driving forces to set up an economic zone in GMS. Growing Chinese regional power is intimately related to the creation of various hubs connecting regional transportation, communication and energy systems that foster the economic development of this region. However, China also proves dark sides of rising powers which take advantage of their privileges to gain benefits. As a "system maker" with its own position and capability, China has notably benefited from building hydropower systems. More importantly, while China is pursuing its benefits and privileges, its hydropower projects have caused some negative effects for the ecosystem in the region. The inflation of dam constructions in both China and GMS countries is raising concerns about using natural resources of the Mekong River. Our concluding part addresses the pressing need to start a serious discussion on the balance between national interests and regional solidarity within the formulation of Chinese foreign policy in GMS.

Extracurricular activities: Investigating the affects of participation-nonparticipation on the Georgia High School Science Graduation Test

Science.gov (United States)

Moran, Ray A.

Student achievement research suggests that participation in extracurricular activities has a positive impact on the academic and developmental outcomes for adolescents. Specifically, several studies reported that adolescents who participate in extra-curricular activities are more likely to experience increases in academic achievement, self-esteem, high school graduation rates, and pro-social behaviors. On the other hand, there is research suggesting that participation in extracurricular activities may distract students from their academic pursuits. The state of Georgia requires all eleventh grade students to participate in the Georgia High School Graduation Test (GHSGT). The GHSGT consists of five separate tests that include (a) English/language arts, (b) math, (c) writing, (d) social studies, and (e) science. Each comprehensive exam is worth 600 points. A high school diploma will be awarded if the student scores at least 500 points on each individual exam. Further, review of student outcomes on the GHSGT revealed that first-time test takers were failing the science portion of the test at a greater percentage than any other subject on the GHSGT. Specifically, the Governor's Office of Student Achievement (GOSA) reported that from 2002 through 2004, a total of 70,451 students or 30.3% of students that were first-time test takers failed the science portion of the GHSGT. As a result, investigating factors that potentially could increase student achievement in science became the impetus for this study. In particular, this study examined the relationships between the levels of student participation in school sponsored extracurricular activities in relation to the level of student achievement in the area of science.

Voting with their mice: personal genome testing and the "participatory turn" in disease research.

Science.gov (United States)

Prainsack, Barbara

2011-05-01

While the availability of genome tests on the internet has given rise to heated debates about the likely impact on personal genome information on test-takers, on insurance, and on healthcare systems, in this article I argue that a more tangible effect of personal genomics is that it has started to change how participation in disease research is conceived and enacted. I examine three models of research participation that personal genomics customers are encouraged to engage in. I conclude with an evaluation of the pitfalls and benefits of "crowdsourcing" genetic disease research in the context of personal genomics.

Características de los cuidadores de niños con cardiopatías congénitas complejas y su calidad de vida Características dos cuidadores de crianças com cardiopatias congênitas complexas e sua qualidade de vida Characteristics of care takers for children with complex congenital heart defects and the quality of life of the former

Directory of Open Access Journals (Sweden)

ELIZABETH ROMERO MASSA

2010-06-01

um paciente". Os cuidadores foram caracterizados através do questionário "Caracterização dos cuidadores", desenhada pelo grupo de Cuidado ao Paciente Crônico, da Universidade Nacional da Colômbia. Para apreciar a associação entre as características dos cuidadores e as dimensões da qualidade de vida se utilizou a análise por meio de intervalos de confiança, considerando como diferença de médias significativa aquela em que o intervalo de confiança não passa por 0. Resultados: participaram 91 cuidadores familiares principais de crianças com cardiopatias congênitas complexas da cidade de Cartagena. Incluem a associação entre as características dos cuidadores e os quatro aspectos do bem-estar que avaliam a qualidade de vida segundo Ferrel. As características que mostraram maior associação com as dimensões da qualidade de vida foram idade, nível socioeconômico, tempo de cuidado e ser único cuidador. Conclusões: através da associação das características dos cuidadores com sua qualidade de vida encontrou-se que o nível socioeconômico e ser o único cuidador está relacionado com o bem-estar psicológico observado, enquanto que ser o único cuidador está vinculado significativamente com a dimensão social.Objective: establish the relation between the characteristics and quality of life of family care takers of children with congenital heart defects. Method: cross-sectional analytical study. Quality of life was measured using the instrument proposed by Ferrell et al. (1997, "Measuring quality of life of a family member who provides care to a patient". Care takers were characterized through the survey called "Characterization of care takers", designed by the Chronic Patient Care Group of Colombia's National University. To estimate the association between the characteristics of care takers and the dimensions of quality of life, the confidence interval analysis was used, considering a significant average difference where the confidence interval

Towards automatic recognition of irregular, short-open answers in Fill-in-the-blank tests

Directory of Open Access Journals (Sweden)

Sergio A. Rojas

2014-01-01

Full Text Available Assessment of student knowledge in Learning Management Systems such as Moodle is mostly conducted using close-ended questions (e.g. multiple-choice whose answers are straightforward to grade without human intervention. FILL-IN-THE-BLANK tests are usually more challenging since they require test-takers to recall concepts and associations not available in the statement of the question itself (no choices or hints are given. Automatic assessment of the latter currently requires the test-taker to give a verbatim answer, that is, free of spelling or typographical mistakes. In this paper, we consider an adapted version of a classical text-matching algorithm that may prevent wrong grading in automatic assessment of FILL-IN-THE-BLANK questions whenever irregular (similar but not exact answers occur due to such types of error. The technique was tested in two scenarios. In the first scenario, misspelled single-word answers to an Internet security questionnaire were correctly recognized within a two letter editing tolerance (achieving 99 % accuracy. The second scenario involved short-open answers to computer programming quizzes (i.e. small blocks of code requiring a structure that conforms to the syntactic rules of the programming language. Twenty-one real-world answers written up by students, taking a computer programming course, were assessed by the method. This assessment addressed the lack of precision in terms of programmer-style artifacts (such as unfamiliar variable or function nomenclature and uses an admissible tolerance of up to 20 % letter-level typos. These scores were satisfactory corroborated by a human expert. Additional findings and potential enhancements to the technique are also discussed.

Do efficiency scores depend on input mix?

DEFF Research Database (Denmark)

Asmild, Mette; Hougaard, Jens Leth; Kronborg, Dorte

2013-01-01

In this paper we examine the possibility of using the standard Kruskal-Wallis (KW) rank test in order to evaluate whether the distribution of efficiency scores resulting from Data Envelopment Analysis (DEA) is independent of the input (or output) mix of the observations. Since the DEA frontier...... is estimated, many standard assumptions for evaluating the KW test statistic are violated. Therefore, we propose to explore its statistical properties by the use of simulation studies. The simulations are performed conditional on the observed input mixes. The method, unlike existing approaches...... the assumption of mix independence is rejected the implication is that it, for example, is impossible to determine whether machine intensive project are more or less efficient than labor intensive projects....

Optimal Input Design for Aircraft Parameter Estimation using Dynamic Programming Principles

Science.gov (United States)

Morelli, Eugene A.; Klein, Vladislav

1990-01-01

A new technique was developed for designing optimal flight test inputs for aircraft parameter estimation experiments. The principles of dynamic programming were used for the design in the time domain. This approach made it possible to include realistic practical constraints on the input and output variables. A description of the new approach is presented, followed by an example for a multiple input linear model describing the lateral dynamics of a fighter aircraft. The optimal input designs produced by the new technique demonstrated improved quality and expanded capability relative to the conventional multiple input design method.

The direct and immediate link test regarding deduction of input VAT

DEFF Research Database (Denmark)

Jensen, Dennis Ramsdahl; Stensgaard, Henrik

2014-01-01

It follows explicitly from the EC VAT Directive that the deduction of input VAT depends on a positive link between on the one hand the incurred expenses and on the other hand the planned or actually completed taxed output transactions. In theory and in practice the deeper nature of this link...

Means of Ensuring Information Security and Experimental Study of the Efficiency of Forensic Handwriting Techniques

OpenAIRE

Sergey Dmitrievich Kulik; Konstantin Igorevich Tkachenko; Denis Arturovich Nikonets

2013-01-01

This article deals with the special means, which allow to protect the information in the document. They are an integral part of the automated tools of ensuring the information security. It is proposed the use of a special input device PC Notes Taker. The results of experimental verification of the effectiveness of forensic handwriting techniques are described.

Behavioral and fMRI evidence of the differing cognitive load of domain-specific assessments.

Science.gov (United States)

Howard, S J; Burianová, H; Ehrich, J; Kervin, L; Calleia, A; Barkus, E; Carmody, J; Humphry, S

2015-06-25

Standards-referenced educational reform has increased the prevalence of standardized testing; however, whether these tests accurately measure students' competencies has been questioned. This may be due to domain-specific assessments placing a differing domain-general cognitive load on test-takers. To investigate this possibility, functional magnetic resonance imaging (fMRI) was used to identify and quantify the neural correlates of performance on current, international standardized methods of spelling assessment. Out-of-scanner testing was used to further examine differences in assessment results. Results provide converging evidence that: (a) the spelling assessments differed in the cognitive load placed on test-takers; (b) performance decreased with increasing cognitive load of the assessment; and (c) brain regions associated with working memory were more highly activated during performance of assessments that were higher in cognitive load. These findings suggest that assessment design should optimize the cognitive load placed on test-takers, to ensure students' results are an accurate reflection of their true levels of competency. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

The Effects of Type and Quantity of Input on Iranian EFL Learners’ Oral Language Proficiency

Directory of Open Access Journals (Sweden)

Zahra Hassanzadeh

2014-05-01

Full Text Available In the written texts on foreign language learning, a group of studies has stressed the function of learning context and learning chances for learners’ language input. The present thesis had two main goals: on the one hand, different types of input to which Iranian grade four high school EFL learners’ are exposed were looked at; on the other hand, the possible relationship between types and quantity of input and Iranian EFL learners’ oral proficiency was investigated. It was supposed that EFL learners who have access to more input will show better oral proficiency than those who do not have. Instruments used in the present study for the purpose of data collation included  PET test, researcher- made questionnaire, oral language proficiency test and face- to -face interview. Data were gathered from 50 Iranian female grade four high school foreign language learners who were selected from among 120 students whose score on PET test were +1SD from the mean score. The results of the Spearman rank –order correlation test for the types of input and oral language proficiency scores, showed that the participants’ oral proficiency score significantly correlated with the intended four sources of input including spoken (rho= 0.416, sig=0.003, written (rho= 0.364, sig=0.009, aural (rho= 0.343, sig=0.015 and visual or audio-visual types of input (rho= 0.47, sig=0.00. The findings of Spearman rank –order correlation test for the quantity of input and oral language proficiency scores also showed a significant relationship between quantity of input and oral language proficiency (rho= 0.543, sig= 0.00. The findings showed that EFL learners’ oral proficiency is significantly correlated with efficient and effective input. The findings may also suggest  answers to the question why most Iranian English learners fail to speak English fluently, which might be due to  lack of effective input. This may emphasize the importance of the types and quantity of

Does the Distribution of Efficiency Scores Depend on the Input Mix?

DEFF Research Database (Denmark)

Asmild, Mette; Leth Hougaard, Jens; Kronborg, Dorte

for evaluating the test statistic are violated. Therefore, we propose to explore its statistical properties by the use of simulation studies. The simulations are performed conditional on the observed input mixes. The method, as shown here, is applicable for models with multiple inputs and one output......In this paper we examine the possibility of using the standard Kruskal-Wallis rank test in order to evaluate whether the distribution of efficiency scores resulting from Data Envelopment Analysis (DEA) is independent of the input (or output) mix. Recently, a general data generating process (DGP......) suiting the DEA methodology has been formulated and some asymptotic properties of the DEA estimators have been established. In line with this generally accepted DGP, we formulate a conditional test for the assumption of mix independence. Since the DEA frontier is estimated, many standardl assumptions...

Energy Systems Test Area (ESTA) Battery Test Operations User Test Planning Guide

Science.gov (United States)

Salinas, Michael

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the ESTA Battery Test Operations. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

TART input manual

International Nuclear Information System (INIS)

Kimlinger, J.R.; Plechaty, E.F.

1982-01-01

The TART code is a Monte Carlo neutron/photon transport code that is only on the CRAY computer. All the input cards for the TART code are listed, and definitions for all input parameters are given. The execution and limitations of the code are described, and input for two sample problems are given

Means of Ensuring Information Security and Experimental Study of the Efficiency of Forensic Handwriting Techniques

Directory of Open Access Journals (Sweden)

Sergey Dmitrievich Kulik

2013-06-01

Full Text Available This article deals with the special means, which allow to protect the information in the document. They are an integral part of the automated tools of ensuring the information security. It is proposed the use of a special input device PC Notes Taker. The results of experimental verification of the effectiveness of forensic handwriting techniques are described.

Load Estimation from Natural input Modal Analysis

DEFF Research Database (Denmark)

Aenlle, Manuel López; Brincker, Rune; Canteli, Alfonso Fernández

2005-01-01

One application of Natural Input Modal Analysis consists in estimating the unknown load acting on structures such as wind loads, wave loads, traffic loads, etc. In this paper, a procedure to determine loading from a truncated modal model, as well as the results of an experimental testing programme...... estimation. In the experimental program a small structure subjected to vibration was used to estimate the loading from the measurements and the experimental modal space. The modal parameters were estimated by Natural Input Modal Analysis and the scaling factors of the mode shapes obtained by the mass change...

ASSISTING STUDENTS TO ATTACK WRITING TASKS ON IELTS TEST WITH “PROBING TECHNIQUE”

Directory of Open Access Journals (Sweden)

Tedi Rohadi

2015-06-01

Full Text Available Writing section on IELTS test is commonly considered one of the most difficult parts of test. The test takers can’t even understand what to do with the tasks provided. They eventually write without clearly knowing the expected direction. Therefore, there should be a fastest way to well equip students to successfully cope with such hindrances. This paper is an action research report of how to make students better understand and answer writing tasks on IELTS test by employing probing techniques as one of test taking strategies. The paper will preliminarily elaborate the characteristics or nature of IELTS test in general and writing section consisting two different tasks in particular including its indicators of what expected kind of writing the testees should be aware of. It will then discuss probing techniques in details. The attack strategies and their sequential implementation will afterward be discussed. The technique will assist students to respectively understand what and how to plan and write effectively on the test.

Variance-based sensitivity indices for models with dependent inputs

International Nuclear Information System (INIS)

Mara, Thierry A.; Tarantola, Stefano

2012-01-01

Computational models are intensively used in engineering for risk analysis or prediction of future outcomes. Uncertainty and sensitivity analyses are of great help in these purposes. Although several methods exist to perform variance-based sensitivity analysis of model output with independent inputs only a few are proposed in the literature in the case of dependent inputs. This is explained by the fact that the theoretical framework for the independent case is set and a univocal set of variance-based sensitivity indices is defined. In the present work, we propose a set of variance-based sensitivity indices to perform sensitivity analysis of models with dependent inputs. These measures allow us to distinguish between the mutual dependent contribution and the independent contribution of an input to the model response variance. Their definition relies on a specific orthogonalisation of the inputs and ANOVA-representations of the model output. In the applications, we show the interest of the new sensitivity indices for model simplification setting. - Highlights: ► Uncertainty and sensitivity analyses are of great help in engineering. ► Several methods exist to perform variance-based sensitivity analysis of model output with independent inputs. ► We define a set of variance-based sensitivity indices for models with dependent inputs. ► Inputs mutual contributions are distinguished from their independent contributions. ► Analytical and computational tests are performed and discussed.

La experiencia de sufrimiento en cuidadores principales de pacientes con dolor oncológico y no oncológico A experiência de sofrimento em cuidadores principais de pacientes com dor oncológica e não oncológica The experience of suffering in main care takers of patients with cancer-pain and non-cancer pain

Directory of Open Access Journals (Sweden)

ALICIA KRIKORIAN D

2010-06-01

oncológica e não oncológica. A informação foi coletada através de uma entrevista semi-estruturada e se quantificou o nível de sofrimento por meio do termômetro emocional como complemento à abordagem qualitativa. Os dados obtidos foram analisados mediante categorias e perfis previamente definidos que dão conta do significado, do nível e dos fatores de sofrimento mais comuns nos cuidadores entrevistados. Os resultados evidenciaram que os níveis de sofrimento na maioria dos cuidadores eram altos. Também, observaram-se sentimentos contraditórios de tristeza e satisfação. No âmbito cognitivo, associaram o sofrimento com dor e com o fato de fazerem bem sua atividade; e na parte comportamental apontaram que o sofrimento estava ligado à dificuldade para controlar os sintomas físicos do paciente, e com o adiamento de atividades próprias de sua vida. Em conclusão, o apoio psicossocial recebido pelos cuidadores não foi percebido como fator protetor para a diminuição do sofrimento; o tipo de dor estava relacionado com a experiência de sofrimento e o papel de cuidadores, que eram maiormente pacientes com dor oncológica. Os cuidadores entrevistados estavam em risco de apresentar Burnout por causa das múltiples demandas de sua funçãoThe purpose of the study is to describe the experience of suffering among informal care takers of patients with cancer-pain and non-cancer pain at three health institutions of Medellín-Colombia. It is a qualitative study of phenomenological type. The sample consisted of 16 care takers of patients who suffered cancer-pain and non-cancer pain. The information was gathered through a semi-structured interview, the level of suffering was quantified through the emotional thermometer as a complementing element to the qualitative approach. The data obtained were analyzed through categories and profiles previously defined which showed the most common meaning, level and factors of suffering among the interviewed care takers. The results

Sound effects: Multimodal input helps infants find displaced objects.

Science.gov (United States)

Shinskey, Jeanne L

2017-09-01

Before 9 months, infants use sound to retrieve a stationary object hidden by darkness but not one hidden by occlusion, suggesting auditory input is more salient in the absence of visual input. This article addresses how audiovisual input affects 10-month-olds' search for displaced objects. In AB tasks, infants who previously retrieved an object at A subsequently fail to find it after it is displaced to B, especially following a delay between hiding and retrieval. Experiment 1 manipulated auditory input by keeping the hidden object audible versus silent, and visual input by presenting the delay in the light versus dark. Infants succeeded more at B with audible than silent objects and, unexpectedly, more after delays in the light than dark. Experiment 2 presented both the delay and search phases in darkness. The unexpected light-dark difference disappeared. Across experiments, the presence of auditory input helped infants find displaced objects, whereas the absence of visual input did not. Sound might help by strengthening object representation, reducing memory load, or focusing attention. This work provides new evidence on when bimodal input aids object processing, corroborates claims that audiovisual processing improves over the first year of life, and contributes to multisensory approaches to studying cognition. Statement of contribution What is already known on this subject Before 9 months, infants use sound to retrieve a stationary object hidden by darkness but not one hidden by occlusion. This suggests they find auditory input more salient in the absence of visual input in simple search tasks. After 9 months, infants' object processing appears more sensitive to multimodal (e.g., audiovisual) input. What does this study add? This study tested how audiovisual input affects 10-month-olds' search for an object displaced in an AB task. Sound helped infants find displaced objects in both the presence and absence of visual input. Object processing becomes more

Documentation of CATHENA input files for the APOLLO computer

International Nuclear Information System (INIS)

1988-06-01

Input files created for the VAX version of the CATHENA two-fluid code have been modified and documented for simulation on the AECB's APOLLO computer system. The input files describe the RD-14 thermalhydraulic loop, the RD-14 steam generator, the RD-12 steam generator blowdown test facility, the Stern Laboratories Cold Water Injection Facility (CWIT), and a CANDU 600 reactor. Sample CATHENA predictions are given and compared with experimental results where applicable. 24 refs

Input-output supervisor

International Nuclear Information System (INIS)

Dupuy, R.

1970-01-01

The input-output supervisor is the program which monitors the flow of informations between core storage and peripheral equipments of a computer. This work is composed of three parts: 1 - Study of a generalized input-output supervisor. With sample modifications it looks like most of input-output supervisors which are running now on computers. 2 - Application of this theory on a magnetic drum. 3 - Hardware requirement for time-sharing. (author) [fr

Energy Systems Test Area (ESTA) Electrical Power Systems Test Operations: User Test Planning Guide

Science.gov (United States)

Salinas, Michael J.

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the ESTA Electrical Power Systems Test Laboratory. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

ATCA-based ATLAS FTK input interface system

Energy Technology Data Exchange (ETDEWEB)

Okumura, Yasuyuki [Chicago U., EFI; Liu, Tiehui Ted [Fermilab; Olsen, Jamieson [Fermilab; Iizawa, Tomoya [Waseda U.; Mitani, Takashi [Waseda U.; Korikawa, Tomohiro [Waseda U.; Yorita, Kohei [Waseda U.; Annovi, Alberto [Frascati; Beretta, Matteo [Frascati; Gatta, Maurizio [Frascati; Sotiropoulou, C-L. [Aristotle U., Thessaloniki; Gkaitatzis, Stamatios [Aristotle U., Thessaloniki; Kordas, Konstantinos [Aristotle U., Thessaloniki; Kimura, Naoki [Aristotle U., Thessaloniki; Cremonesi, Matteo [Chicago U., EFI; Yin, Hang [Fermilab; Xu, Zijun [Peking U.

2015-04-27

The first stage of the ATLAS Fast TracKer (FTK) is an ATCA-based input interface system, where hits from the entire silicon tracker are clustered and organized into overlapping eta-phi trigger towers before being sent to the tracking engines. First, FTK Input Mezzanine cards receive hit data and perform clustering to reduce data volume. Then, the ATCA-based Data Formatter system will organize the trigger tower data, sharing data among boards over full mesh backplanes and optic fibers. The board and system level design concepts and implementation details, as well as the operation experiences from the FTK full-chain testing, will be presented.

ATCA-based ATLAS FTK input interface system

CERN Document Server

Okumura, Y; The ATLAS collaboration; Olsen, J; Iizawa, T; Mitani, T; Korikawa, T; Yorita, K; Annovi, A; Beretta, M; Gatta, M; Sotiropoulou, C; Gkaitatzis, S; Kordas, K; Kimura, N; Cremonesi, M; Yin, H; Xu, Z

2014-01-01

The first stage of the ATLAS Fast TracKer (FTK) is an ATCA-based input interface system, where hits from the entire silicon tracker must be clustered and organized into overlapping eta-phi trigger towers before being sent to the tracking processors. First, FTK Input Mezzanine cards receive hit data and perform clustering to reduce data volume. Then, the ATCA-based Data Formatter system will organize the trigger tower data, sharing data among boards over a full-mesh backplane. The board and system level performance studies and implementation details, as well as the operation experiences from the FTK full-chain testing, will be presented.

I-125 input into antibodies molecules specific to australian antigen

International Nuclear Information System (INIS)

Abdukayumov, A. M.; Chistyakov, P.G.; Garajshina, G. R.

1999-01-01

There are experimental data on I-125 input into antibodies molecules specific to superficial antigen of hepatitis B virus (australian antigen). Three ways of input are submitted: with the help of T chloramine usage, Bolton-Hunter Reagent and with the help of iodogen. There are also comparative characteristics of iodized products obtained: molar radioactivity, radiochemical frequency, immuno - reactivity. The report also discusses advantages and disadvantages of the used methods for inputting I-125 into antibodies to australian antigen in order to study the possibility of creating radio immunological test system for detecting superficial antigen of B hepatitis

Example of material accounting and verification of reprocessing input

International Nuclear Information System (INIS)

Koch, L.; Schoof, S.

1981-01-01

An example is described in this paper of material accounting at the reprocessing input point. Knowledge of the fuel history and chemical analyses of the spent fuel permitted concepts to be tested which have been developed for the determination of the input by the operator and for its verification by nuclear material safeguards with the intention of detecting a protracted as well as an abrupt diversion. Accuracies obtained for a material balance of a PWR fuel reprocessing campaign are given. 6 refs

ColloInputGenerator

DEFF Research Database (Denmark)

2013-01-01

This is a very simple program to help you put together input files for use in Gries' (2007) R-based collostruction analysis program. It basically puts together a text file with a frequency list of lexemes in the construction and inserts a column where you can add the corpus frequencies. It requires...... it as input for basic collexeme collostructional analysis (Stefanowitsch & Gries 2003) in Gries' (2007) program. ColloInputGenerator is, in its current state, based on programming commands introduced in Gries (2009). Projected updates: Generation of complete work-ready frequency lists....

Testing for Bias against Female Test Takers of the Graduate Management Admissions Test and Potential Impact on Admissions to Graduate Programs in Business.

Science.gov (United States)

Wright, Robert E.; Bachrach, Daniel G.

2003-01-01

Graduate Management Admission Test (GMAT) scores and grade point average in graduate core courses were compared for 190 male and 144 female business administration students. No significant differences in course performance were found, but males had been admitted with significantly higher GMAT scores, suggesting a bias against women. (Contains 27…

Nuclear model parameter testing for nuclear data evaluation (Reference Input Parameter Library: Phase II). Summary report of the third research co-ordination meeting

International Nuclear Information System (INIS)

Herman, M.

2002-04-01

This report summarises the results and recommendations of the third Research Co-ordination Meeting on improving and testing the Reference Input Parameter Library: Phase II. A primary aim of the meeting was to review the achievements of the CRP, to assess the testing of the library and to approve the final contents. Actions were approved that will result in completion of the file and a draft report by the end of February 2002. Full release of the library is scheduled for July 2002. (author)

Nuclear model parameter testing for nuclear data evaluation (Reference Input Parameter Library: Phase II). Summary report of the second research co-ordination meeting

International Nuclear Information System (INIS)

Herman, M.

2000-09-01

This report summarizes the results and recommendations of the Second Research Coordination Meeting on Testing and Improvement of the Reference Input Parameter Library: Phase II. A primary aim of this meeting was to review progress in the CRP work, to review results of testing the library, to establish the RIPL-2 format and to decide on the contents of the library. The actions were agreed with an aim to complete the project by the end of 2001. Separate abstracts were prepared for 10 individual papers

High Input Voltage, Silicon Carbide Power Processing Unit Performance Demonstration

Science.gov (United States)

Bozak, Karin E.; Pinero, Luis R.; Scheidegger, Robert J.; Aulisio, Michael V.; Gonzalez, Marcelo C.; Birchenough, Arthur G.

2015-01-01

A silicon carbide brassboard power processing unit has been developed by the NASA Glenn Research Center in Cleveland, Ohio. The power processing unit operates from two sources: a nominal 300 Volt high voltage input bus and a nominal 28 Volt low voltage input bus. The design of the power processing unit includes four low voltage, low power auxiliary supplies, and two parallel 7.5 kilowatt (kW) discharge power supplies that are capable of providing up to 15 kilowatts of total power at 300 to 500 Volts (V) to the thruster. Additionally, the unit contains a housekeeping supply, high voltage input filter, low voltage input filter, and master control board, such that the complete brassboard unit is capable of operating a 12.5 kilowatt Hall effect thruster. The performance of the unit was characterized under both ambient and thermal vacuum test conditions, and the results demonstrate exceptional performance with full power efficiencies exceeding 97%. The unit was also tested with a 12.5kW Hall effect thruster to verify compatibility and output filter specifications. With space-qualified silicon carbide or similar high voltage, high efficiency power devices, this would provide a design solution to address the need for high power electric propulsion systems.

Control Board Digital Interface Input Devices – Touchscreen, Trackpad, or Mouse?

Energy Technology Data Exchange (ETDEWEB)

Thomas A. Ulrich; Ronald L. Boring; Roger Lew

2015-08-01

The authors collaborated with a power utility to evaluate input devices for use in the human system interface (HSI) for a new digital Turbine Control System (TCS) at a nuclear power plant (NPP) undergoing a TCS upgrade. A standalone dynamic software simulation of the new digital TCS and a mobile kiosk were developed to conduct an input device study to evaluate operator preference and input device effectiveness. The TCS software presented the anticipated HSI for the TCS and mimicked (i.e., simulated) the turbine systems’ responses to operator commands. Twenty-four licensed operators from the two nuclear power units participated in the study. Three input devices were tested: a trackpad, mouse, and touchscreen. The subjective feedback from the survey indicates the operators preferred the touchscreen interface. The operators subjectively rated the touchscreen as the fastest and most comfortable input device given the range of tasks they performed during the study, but also noted a lack of accuracy for selecting small targets. The empirical data suggest the mouse input device provides the most consistent performance for screen navigation and manipulating on screen controls. The trackpad input device was both empirically and subjectively found to be the least effective and least desired input device.

Testing and Evaluation of a Pen Input Device Using an Inertial/Magnetic Sensor Module

National Research Council Canada - National Science Library

Drakopoulos, Leonidas

2008-01-01

.... Before continuing to evaluate the 3-D writing, a calibration algorithm is implemented for computing the length between the nose of the pen input device and the point where the inertial/magnetic...

Simplifying BRDF input data for optical signature modeling

Science.gov (United States)

Hallberg, Tomas; Pohl, Anna; Fagerström, Jan

2017-05-01

Scene simulations of optical signature properties using signature codes normally requires input of various parameterized measurement data of surfaces and coatings in order to achieve realistic scene object features. Some of the most important parameters are used in the model of the Bidirectional Reflectance Distribution Function (BRDF) and are normally determined by surface reflectance and scattering measurements. Reflectance measurements of the spectral Directional Hemispherical Reflectance (DHR) at various incident angles can normally be performed in most spectroscopy labs, while measuring the BRDF is more complicated or may not be available at all in many optical labs. We will present a method in order to achieve the necessary BRDF data directly from DHR measurements for modeling software using the Sandford-Robertson BRDF model. The accuracy of the method is tested by modeling a test surface by comparing results from using estimated and measured BRDF data as input to the model. These results show that using this method gives no significant loss in modeling accuracy.

Finite test sets development method for test execution of safety critical software

International Nuclear Information System (INIS)

Shin, Sung Min; Kim, Hee Eun; Kang, Hyun Gook; Lee, Sung Jiun

2014-01-01

The V and V method has been utilized for this safety critical software, while SRGM has difficulties because of lack of failure occurrence data on developing phase. For the safety critical software, however, failure data cannot be gathered after installation in real plant when we consider the severe consequence. Therefore, to complement the V and V method, the test-based method need to be developed. Some studies on test-based reliability quantification method for safety critical software have been conducted in nuclear field. These studies provide useful guidance on generating test sets. An important concept of the guidance is that the test sets represent 'trajectories' (a series of successive values for the input variables of a program that occur during the operation of the software over time) in the space of inputs to the software.. Actually, the inputs to the software depends on the state of plant at that time, and these inputs form a new internal state of the software by changing values of some variables. In other words, internal state of the software at specific timing depends on the history of past inputs. Here the internal state of the software which can be changed by past inputs is named as Context of Software (CoS). In a certain CoS, a software failure occurs when a fault is triggered by some inputs. To cover the failure occurrence mechanism of a software, preceding researches insist that the inputs should be a trajectory form. However, in this approach, there are two critical problems. One is the length of the trajectory input. Input trajectory should long enough to cover failure mechanism, but the enough length is not clear. What is worse, to cover some accident scenario, one set of input should represent dozen hours of successive values. The other problem is number of tests needed. To satisfy a target reliability with reasonable confidence level, very large number of test sets are required. Development of this number of test sets is a herculean

The Development of a Competency Testing Systems: Adopting TAM to Explore User’s Acceptance

Directory of Open Access Journals (Sweden)

Ibrahim Wahyu Saputra

2017-12-01

Full Text Available The main problems of learning evaluation using paper based-test are inefficient time and cost. Technology can be used as a system to evaluate the learning process. Using technology can save time and cost of implementing learning evaluations. The aims of this study are to create a software product that can be used to evaluate the learning process. This software product is designed to be used by the test organizer or test committee, the teachers and the students (test takers. This software product was developed using Waterfall Model with five stages of development; communication, planning, modeling, construction, and deployment. The testing was conducted by using Blackbox Method and TAM Theory by considering the aspect of usefulness and the aspect ease of use. The analysis was based on the flow of the current test system. The web-based platform enables ease of access for conducting work in various places. According to the result, the Developed Skills Competency Test System is accepted and can be used by the user as an evaluation system.

Input and execution

International Nuclear Information System (INIS)

Carr, S.; Lane, G.; Rowling, G.

1986-11-01

This document describes the input procedures, input data files and operating instructions for the SYVAC A/C 1.03 computer program. SYVAC A/C 1.03 simulates the groundwater mediated movement of radionuclides from underground facilities for the disposal of low and intermediate level wastes to the accessible environment, and provides an estimate of the subsequent radiological risk to man. (author)

A new quantum flux parametron logic gate with large input margin

International Nuclear Information System (INIS)

Hioe, W.; Hosoya, M.; Goto, E.

1991-01-01

This paper reports on the Quantum Flux Parametron (QFP) which is a flux transfer, flux activated Josephson logic device which realizes much lower power dissipation than other Josephson logic devices. Being a two-terminal device its correct operation may be affected by coupling to other QFPs. The problems include backcoupling from active QFPs through inactive QFPs (relay noise), coupling between QFPs activated at different times because of clock skew (homophase noise), and interaction between active QFPs (reaction hazard). Previous QFP circuits worked by wired-majority, which being a linear input logic, has low input margin. A new logic gate (D-gate) using a QFP to perform logic operations has been analyzed and tested by computer simulation. Relay noise, homophase noise and reaction hazard are substantially reduced. Moreover, the input have little interaction hence input margin is greatly improved

Boiling and burnout phenomena under transient heat input, 1

International Nuclear Information System (INIS)

Aoki, Shigebumi; Kozawa, Yoshiyuki; Iwasaki, Hideaki.

1976-01-01

In order to simulate the thermo-hydrodynamic conditions at reactor power excursions, a test piece was placed in a forced convective channel and heated with exponential power inputs. The boiling heat transfer and the burnout heat flux under the transient heat input were measured, and pressure and water temperature changes in the test section were recorded at the same time. Following experimental results were obtained; (1) Transient boiling heat transfer characteristics at high heat flux stayed on the stationary nucleate boiling curve of each flow condition, or extrapolated line of the curves. (2) Transient burnout heat flux increased remarkably with decreasing heating-time-constant, when the flow rate was lower and the subcooling was higher. (3) Transient burnout phenomena were expressed with the relation of (q sub(max) - q sub(sBO)) tau = constant at several flow conditions. This relation was derived from the stationary burnout mechanism of pool boiling. (auth.)

PLEXOS Input Data Generator

Energy Technology Data Exchange (ETDEWEB)

2017-02-01

The PLEXOS Input Data Generator (PIDG) is a tool that enables PLEXOS users to better version their data, automate data processing, collaborate in developing inputs, and transfer data between different production cost modeling and other power systems analysis software. PIDG can process data that is in a generalized format from multiple input sources, including CSV files, PostgreSQL databases, and PSS/E .raw files and write it to an Excel file that can be imported into PLEXOS with only limited manual intervention.

Standard practice for process compensated resonance testing via swept sine input for metallic and Non-Metallic parts

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice describes a general procedure for using the process compensated resonance testing (PCRT) via swept sine input method to identify metallic and non-metallic parts’ resonant pattern differences that can be used to indentify parts with anomalies causing deficiencies in the expected performance of the part in service. This practice is intended for use with instruments capable of exciting, measuring, recording, and analyzing multiple whole body mechanical vibration resonant frequencies within parts exhibiting acoustical ringing in the audio, or ultrasonic, resonant frequency ranges, or both. PCRT is used in the presence of manufacturing process variance to distinguish acceptable parts from those containing significant anomalies in physical characteristics expected to significantly alter the performance. Such physical characteristics include, but are not limited to, cracks, voids, porosity, shrink, inclusions, discontinuities, grain and crystalline structure differences, density related anomalies...

Six-Degree-of-Freedom Dynamic Test System (SDTS) User Test Planning Guide

Science.gov (United States)

Stokes, LeBarian

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the SDTS. The User Test Planning Guide aids in establishing expectations for both NASA and non- NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Facial Feedback and Social Input: Effects on Laughter and Enjoyment in Children with Autism Spectrum Disorders

Science.gov (United States)

Helt, Molly S.; Fein, Deborah A.

2016-01-01

Both social input and facial feedback appear to be processed differently by individuals with autism spectrum disorder (ASD). We tested the effects of both of these types of input on laughter in children with ASD. Sensitivity to facial feedback was tested in 43 children with ASD, aged 8-14 years, and 43 typically developing children matched for…

The experience of suffering in main care takers of patients with cancer-pain and non-cancer pain La experiencia de sufrimiento en cuidadores principales de pacientes con dolor oncológico y no oncológico A experiência de sofrimento em cuidadores principais de pacientes com dor oncológica e não oncológica

Directory of Open Access Journals (Sweden)

PALACIO G CAROLINA

2010-04-01

Full Text Available The purpose of the study is to describe the experience of suffering among informal care takers of patients with cancer-pain and non-cancer pain at three health institutions of Medellín-Colombia. It is a qualitative study of phenomenological type. The sample consisted of 16 care takers of patients who suffered cancer-pain and non-cancer pain. The information was gathered through a semi-structured interview, the level of suffering was quantified through the emotional thermometer as a complementing element to the qualitative approach. The data obtained were analyzed through categories and profiles previously defined which showed the most common meaning, level and factors of suffering among the interviewed care takers. The results showed that the majority of care takers experienced high levels of suffering. They reported feelings of sadness and satisfaction in a contradictory manner. In the cognitive realm, they associated suffering with pain and the good execution of their activity; in the behavioral field, they expressed that suffering was related to the difficulty in controling the patient’s physical symptoms, and with the deferral of their own life activities. In conclusion, the psychological support received by the care takers was perceived as a protecting factor to reduce suffering; the type of pain was related to the experience of suffering and the care taker’s role, who were mostly female care takers of patients with cancer pain. The interviewed care takers were at risk of presenting Burnout due to the multiple demands inherent to their role.El objetivo de la investigación es describir la experiencia de sufrimiento de los cuidadores informales de pacientes con dolor oncológico y no oncológico de tres instituciones de salud de Medellín. Es una investigación cualitativa de tipo fenomenológico. La muestra estuvo conformada por 16 cuidadores de pacientes con dolor oncológico y no oncológico. La información se recolectó a trav

Development of an Input Suite for an Orthotropic Composite Material Model

Science.gov (United States)

Hoffarth, Canio; Shyamsunder, Loukham; Khaled, Bilal; Rajan, Subramaniam; Goldberg, Robert K.; Carney, Kelly S.; Dubois, Paul; Blankenhorn, Gunther

2017-01-01

An orthotropic three-dimensional material model suitable for use in modeling impact tests has been developed that has three major components elastic and inelastic deformations, damage and failure. The material model has been implemented as MAT213 into a special version of LS-DYNA and uses tabulated data obtained from experiments. The prominent features of the constitutive model are illustrated using a widely-used aerospace composite the T800S3900-2B[P2352W-19] BMS8-276 Rev-H-Unitape fiber resin unidirectional composite. The input for the deformation model consists of experimental data from 12 distinct experiments at a known temperature and strain rate: tension and compression along all three principal directions, shear in all three principal planes, and off axis tension or compression tests in all three principal planes, along with other material constants. There are additional input associated with the damage and failure models. The steps in using this model are illustrated composite characterization tests, verification tests and a validation test. The results show that the developed and implemented model is stable and yields acceptably accurate results.

International Trade in Intermediate Inputs: The Case of the Automobile Industry

OpenAIRE

Markus Diehl

2001-01-01

International trade statistics and input-output tables are analyzed in order to test the hypothesis that international production networks have become more relevant. The share of imported inputs in the gross output value of the motor vehicle industry has grown significantly during the last two decades. Moreover, some low-income countries have become strong exporters of automobile parts, but this trade is mainly regional rather than global. Detailed results are presented in case studies on fou...

Material input of nuclear fuel

International Nuclear Information System (INIS)

Rissanen, S.; Tarjanne, R.

2001-01-01

The Material Input (MI) of nuclear fuel, expressed in terms of the total amount of natural material needed for manufacturing a product, is examined. The suitability of the MI method for assessing the environmental impacts of fuels is also discussed. Material input is expressed as a Material Input Coefficient (MIC), equalling to the total mass of natural material divided by the mass of the completed product. The material input coefficient is, however, only an intermediate result, which should not be used as such for the comparison of different fuels, because the energy contents of nuclear fuel is about 100 000-fold compared to the energy contents of fossil fuels. As a final result, the material input is expressed in proportion to the amount of generated electricity, which is called MIPS (Material Input Per Service unit). Material input is a simplified and commensurable indicator for the use of natural material, but because it does not take into account the harmfulness of materials or the way how the residual material is processed, it does not alone express the amount of environmental impacts. The examination of the mere amount does not differentiate between for example coal, natural gas or waste rock containing usually just sand. Natural gas is, however, substantially more harmful for the ecosystem than sand. Therefore, other methods should also be used to consider the environmental load of a product. The material input coefficient of nuclear fuel is calculated using data from different types of mines. The calculations are made among other things by using the data of an open pit mine (Key Lake, Canada), an underground mine (McArthur River, Canada) and a by-product mine (Olympic Dam, Australia). Furthermore, the coefficient is calculated for nuclear fuel corresponding to the nuclear fuel supply of Teollisuuden Voima (TVO) company in 2001. Because there is some uncertainty in the initial data, the inaccuracy of the final results can be even 20-50 per cent. The value

Finite test sets development method for test execution of safety critical software

International Nuclear Information System (INIS)

El-Bordany Ayman; Yun, Won Young

2014-01-01

It reads inputs, computes new states, and updates output for each scan cycle. Korea Nuclear Instrumentation and Control System (KNICS) has recently developed a fully digitalized Reactor Protection System (RPS) based on PLD. As a digital system, this RPS is equipped with a dedicated software. The Reliability of this software is crucial to NPPs safety where its malfunction may cause irreversible consequences and affect the whole system as a Common Cause Failure (CCF). To guarantee the reliability of the whole system, the reliability of this software needs to be quantified. There are three representative methods for software reliability quantification, namely the Verification and Validation (V and V) quality-based method, the Software Reliability Growth Model (SRGM), and the test-based method. An important concept of the guidance is that the test sets represent 'trajectories' (a series of successive values for the input variables of a program that occur during the operation of the software over time) in the space of inputs to the software.. Actually, the inputs to the software depends on the state of plant at that time, and these inputs form a new internal state of the software by changing values of some variables. In other words, internal state of the software at specific timing depends on the history of past inputs. Here the internal state of the software which can be changed by past inputs is named as Context of Software (CoS). In a certain CoS, a software failure occurs when a fault is triggered by some inputs. To cover the failure occurrence mechanism of a software, preceding researches insist that the inputs should be a trajectory form. However, in this approach, there are two critical problems. One is the length of the trajectory input. Input trajectory should long enough to cover failure mechanism, but the enough length is not clear. What is worse, to cover some accident scenario, one set of input should represent dozen hours of successive values

Reconstruction of neuronal input through modeling single-neuron dynamics and computations

International Nuclear Information System (INIS)

Qin, Qing; Wang, Jiang; Yu, Haitao; Deng, Bin; Chan, Wai-lok

2016-01-01

Mathematical models provide a mathematical description of neuron activity, which can better understand and quantify neural computations and corresponding biophysical mechanisms evoked by stimulus. In this paper, based on the output spike train evoked by the acupuncture mechanical stimulus, we present two different levels of models to describe the input-output system to achieve the reconstruction of neuronal input. The reconstruction process is divided into two steps: First, considering the neuronal spiking event as a Gamma stochastic process. The scale parameter and the shape parameter of Gamma process are, respectively, defined as two spiking characteristics, which are estimated by a state-space method. Then, leaky integrate-and-fire (LIF) model is used to mimic the response system and the estimated spiking characteristics are transformed into two temporal input parameters of LIF model, through two conversion formulas. We test this reconstruction method by three different groups of simulation data. All three groups of estimates reconstruct input parameters with fairly high accuracy. We then use this reconstruction method to estimate the non-measurable acupuncture input parameters. Results show that under three different frequencies of acupuncture stimulus conditions, estimated input parameters have an obvious difference. The higher the frequency of the acupuncture stimulus is, the higher the accuracy of reconstruction is.

Reconstruction of neuronal input through modeling single-neuron dynamics and computations

Energy Technology Data Exchange (ETDEWEB)

Qin, Qing; Wang, Jiang; Yu, Haitao; Deng, Bin, E-mail: dengbin@tju.edu.cn; Chan, Wai-lok [School of Electrical Engineering and Automation, Tianjin University, Tianjin 300072 (China)

2016-06-15

Mathematical models provide a mathematical description of neuron activity, which can better understand and quantify neural computations and corresponding biophysical mechanisms evoked by stimulus. In this paper, based on the output spike train evoked by the acupuncture mechanical stimulus, we present two different levels of models to describe the input-output system to achieve the reconstruction of neuronal input. The reconstruction process is divided into two steps: First, considering the neuronal spiking event as a Gamma stochastic process. The scale parameter and the shape parameter of Gamma process are, respectively, defined as two spiking characteristics, which are estimated by a state-space method. Then, leaky integrate-and-fire (LIF) model is used to mimic the response system and the estimated spiking characteristics are transformed into two temporal input parameters of LIF model, through two conversion formulas. We test this reconstruction method by three different groups of simulation data. All three groups of estimates reconstruct input parameters with fairly high accuracy. We then use this reconstruction method to estimate the non-measurable acupuncture input parameters. Results show that under three different frequencies of acupuncture stimulus conditions, estimated input parameters have an obvious difference. The higher the frequency of the acupuncture stimulus is, the higher the accuracy of reconstruction is.

Impact of environmental inputs on reverse-engineering approach to network structures.

Science.gov (United States)

Wu, Jianhua; Sinfield, James L; Buchanan-Wollaston, Vicky; Feng, Jianfeng

2009-12-04

Uncovering complex network structures from a biological system is one of the main topic in system biology. The network structures can be inferred by the dynamical Bayesian network or Granger causality, but neither techniques have seriously taken into account the impact of environmental inputs. With considerations of natural rhythmic dynamics of biological data, we propose a system biology approach to reveal the impact of environmental inputs on network structures. We first represent the environmental inputs by a harmonic oscillator and combine them with Granger causality to identify environmental inputs and then uncover the causal network structures. We also generalize it to multiple harmonic oscillators to represent various exogenous influences. This system approach is extensively tested with toy models and successfully applied to a real biological network of microarray data of the flowering genes of the model plant Arabidopsis Thaliana. The aim is to identify those genes that are directly affected by the presence of the sunlight and uncover the interactive network structures associating with flowering metabolism. We demonstrate that environmental inputs are crucial for correctly inferring network structures. Harmonic causal method is proved to be a powerful technique to detect environment inputs and uncover network structures, especially when the biological data exhibit periodic oscillations.

Chemical sensors are hybrid-input memristors

Science.gov (United States)

Sysoev, V. I.; Arkhipov, V. E.; Okotrub, A. V.; Pershin, Y. V.

2018-04-01

Memristors are two-terminal electronic devices whose resistance depends on the history of input signal (voltage or current). Here we demonstrate that the chemical gas sensors can be considered as memristors with a generalized (hybrid) input, namely, with the input consisting of the voltage, analyte concentrations and applied temperature. The concept of hybrid-input memristors is demonstrated experimentally using a single-walled carbon nanotubes chemical sensor. It is shown that with respect to the hybrid input, the sensor exhibits some features common with memristors such as the hysteretic input-output characteristics. This different perspective on chemical gas sensors may open new possibilities for smart sensor applications.

Dual-Input Isolated Full-Bridge Boost DC-DC Converter Based on the Distributed Transformers

DEFF Research Database (Denmark)

Zhang, Zhe; Thomsen, Ole Cornelius; Andersen, Michael A. E.

2012-01-01

In this paper, a new two-input isolated boost dc-dc converter based on a distributed multi-transformer structure which is suitable for hybrid renewable energy systems is investigated and designed. With a novel transformer winding-connecting strategy, the two input ports can be decoupled completely...... and the single-input mode, respectively. The main advantage of the proposed topology is that the four transformers and the secondary rectifiers are fully utilized whether the converter is connected with two input power sources or only one input. Although the four transformers are employed, the nominal powers...... of each transformer and rectifier are both reduced by four times. Furthermore, some special issues on converter design, such as increasing number of the input ports, the magnetic integration and the ground loop decoupling are discussed. A 2 kW prototype was built and tested. Experiments on the converter...

Teacher Test Accountability.

Directory of Open Access Journals (Sweden)

Larry H. Ludlow

2001-02-01

Full Text Available Given the high stakes of teacher testing, there is no doubt that every teacher test should meet the industry guidelines set forth in the Standards for Educational and Psychological Testing. Unfortunately, however, there is no public or private business or governmental agency that serves to certify or in any other formal way declare that any teacher test does, in fact, meet the psychometric recommendations stipulated in the Standards. Consequently, there are no legislated penalties for faulty products (tests nor are there opportunities for test takers simply to raise questions about a test and to have their questions taken seriously by an impartial panel. The purpose of this article is to highlight some of the psychometric results reported by National Evaluation Systems (NES in their 1999 Massachusetts Educator Certification Test (MECT Technical Report, and more specifically, to identify those technical characteristics of the MECT that are inconsistent with the Standards. A second purpose of this article is to call for the establishment of a standing test auditing organization with investigation and sanctioning power. The significance of the present analysis is twofold: a psychometric results for the MECT are similar in nature to psychometric results presented as evidence of test development flaws in an Alabama class-action lawsuit dealing with teacher certification (an NES-designed testing system; and b there was no impartial enforcement agency to whom complaints about the Alabama tests could be brought, other than the court, nor is there any such agency to whom complaints about the Massachusetts tests can be brought. I begin by reviewing NES's role in Allen v. Alabama State Board of Education, 81-697-N. Next I explain the purpose and interpretation of standard item analysis procedures and statistics. Finally, I present results taken directly from the 1999 MECT Technical Report and compare them to procedures, results, and consequences of

Item difficulty of multiple choice tests dependant on different item response formats – An experiment in fundamental research on psychological assessment

Directory of Open Access Journals (Sweden)

KLAUS D. KUBINGER

2007-12-01

Full Text Available Multiple choice response formats are problematical as an item is often scored as solved simply because the test-taker is a lucky guesser. Instead of applying pertinent IRT models which take guessing effects into account, a pragmatic approach of re-conceptualizing multiple choice response formats to reduce the chance of lucky guessing is considered. This paper compares the free response format with two different multiple choice formats. A common multiple choice format with a single correct response option and five distractors (“1 of 6” is used, as well as a multiple choice format with five response options, of which any number of the five is correct and the item is only scored as mastered if all the correct response options and none of the wrong ones are marked (“x of 5”. An experiment was designed, using pairs of items with exactly the same content but different response formats. 173 test-takers were randomly assigned to two test booklets of 150 items altogether. Rasch model analyses adduced a fitting item pool, after the deletion of 39 items. The resulting item difficulty parameters were used for the comparison of the different formats. The multiple choice format “1 of 6” differs significantly from “x of 5”, with a relative effect of 1.63, while the multiple choice format “x of 5” does not significantly differ from the free response format. Therefore, the lower degree of difficulty of items with the “1 of 6” multiple choice format is an indicator of relevant guessing effects. In contrast the “x of 5” multiple choice format can be seen as an appropriate substitute for free response format.

Crossover Can Be Constructive When Computing Unique Input Output Sequences

DEFF Research Database (Denmark)

Lehre, Per Kristian; Yao, Xin

2010-01-01

Unique input output (UIO) sequences have important applications in conformance testing of finite state machines (FSMs). Previous experimental and theoretical research has shown that evolutionary algorithms (EAs) can compute UIOs efficiently on many FSM instance classes, but fail on others. However...

Enhanced Input in LCTL Pedagogy

Directory of Open Access Journals (Sweden)

Marilyn S. Manley

2009-08-01

Full Text Available Language materials for the more-commonly-taught languages (MCTLs often include visual input enhancement (Sharwood Smith 1991, 1993 which makes use of typographical cues like bolding and underlining to enhance the saliency of targeted forms. For a variety of reasons, this paper argues that the use of enhanced input, both visual and oral, is especially important as a tool for the lesscommonly-taught languages (LCTLs. As there continues to be a scarcity of teaching resources for the LCTLs, individual teachers must take it upon themselves to incorporate enhanced input into their own self-made materials. Specific examples of how to incorporate both visual and oral enhanced input into language teaching are drawn from the author’s own experiences teaching Cuzco Quechua. Additionally, survey results are presented from the author’s Fall 2010 semester Cuzco Quechua language students, supporting the use of both visual and oral enhanced input.

Enhanced Input in LCTL Pedagogy

Directory of Open Access Journals (Sweden)

Marilyn S. Manley

2010-08-01

Full Text Available Language materials for the more-commonly-taught languages (MCTLs often include visual input enhancement (Sharwood Smith 1991, 1993 which makes use of typographical cues like bolding and underlining to enhance the saliency of targeted forms. For a variety of reasons, this paper argues that the use of enhanced input, both visual and oral, is especially important as a tool for the lesscommonly-taught languages (LCTLs. As there continues to be a scarcity of teaching resources for the LCTLs, individual teachers must take it upon themselves to incorporate enhanced input into their own self-made materials. Specific examples of how to incorporate both visual and oral enhanced input into language teaching are drawn from the author’s own experiences teaching Cuzco Quechua. Additionally, survey results are presented from the author’s Fall 2010 semester Cuzco Quechua language students, supporting the use of both visual and oral enhanced input.

Test input of radio-frequency power into the resonator mockup to the second part of the linear accelerator of a meson factory

International Nuclear Information System (INIS)

Andreev, V.G.; Belugin, V.M.; Galkin, V.M.

1976-01-01

On the experimental stand of the Radio Engineering Institute of the Academy of Sciences of the USSR the accelerating structures for the second portion of the ''meson factory'' are researched. The test power input into the models of of the accelerating structures is accomplished from a powerful pulse klystron generator with external excitation and operating frequency of 991 MHz. The pulse duration of 140 μ s can be diminished as required during ageing of the resonator. The power is adjusted within wide limits. The wave-guide feeders measuring 220 104 terminate in the can-type sealing ports incorporating fused quartz discs and matching diaphragms. The standing wave coefficient in the feeder does not exceed 1.4. The temperature of the cooling water at the resonator input is kept stable. Under nominal conditions the average intensity of the electric field on the axis is 36 kV/cm, the pulse power of the r-f losses in the resonator is equal to 0.9 MW, the average power amounts to 11 kW

QUALITATIVE DATA AND ERROR MEASUREMENT IN INPUT-OUTPUT-ANALYSIS

NARCIS (Netherlands)

NIJKAMP, P; OOSTERHAVEN, J; OUWERSLOOT, H; RIETVELD, P

1992-01-01

This paper is a contribution to the rapidly emerging field of qualitative data analysis in economics. Ordinal data techniques and error measurement in input-output analysis are here combined in order to test the reliability of a low level of measurement and precision of data by means of a stochastic

Young Adults' Knowledge and Understanding of Personal Finance in Germany: Interviews with Experts and Test-Takers

Science.gov (United States)

Happ, Roland; Förster, Manuel; Rüspeler, Ann-Katrin; Rothweiler, Jasmin

2018-01-01

In recent years, the financial education of young adults has gained importance in Germany; however, very few valid test instruments to assess the knowledge and understanding of personal finance are suitable for use in Germany. In this article, we describe results of a survey in which experts in Germany in areas related to personal finance judged…

MDS MIC Catalog Inputs

Science.gov (United States)

Johnson-Throop, Kathy A.; Vowell, C. W.; Smith, Byron; Darcy, Jeannette

2006-01-01

This viewgraph presentation reviews the inputs to the MDS Medical Information Communique (MIC) catalog. The purpose of the group is to provide input for updating the MDS MIC Catalog and to request that MMOP assign Action Item to other working groups and FSs to support the MITWG Process for developing MIC-DDs.

IM-135-562-00 IDIM instruction manual for the isolated digital input module for SLC

International Nuclear Information System (INIS)

Kieffer, J.

1983-01-01

This unit is designed as a general purpose digital input module. Each input is opto-isolated, and is designed to operate over a wide range of positive input voltages. The unit is nonlatching, each CAMAC Read of the unit presenting the data as seen at the inputs at the time of the Read command. The manual includes the following sections: specifications; front panel, lights and connectors; reference list; functional description; 82S100 logic equations; test and checkout procedures; appendix A, SLAC 82S100 programming data; and appendix B, JXK-FORTH 135-562 program listing

Real-time discrete suboptimal control for systems with input and state delays: Experimental tests on a dehydration process.

Science.gov (United States)

Rodríguez-Guerrero, Liliam; Santos-Sánchez, Omar-Jacobo; Cervantes-Escorcia, Nicolás; Romero, Hugo

2017-11-01

This article presents a suboptimal control strategy with finite horizon for affine nonlinear discrete systems with both state and input delays. The Dynamic Programming Approach is used to obtain the suboptimal control sequence, but in order to avoid the computation of the Bellman functional, a numerical approximation of this function is proposed in every step. The feasibility of our proposal is demonstrated via an experimental test on a dehydration process and the obtained results show a good performance and behavior of this process. Then in order to demonstrate the benefits of using this kind of control strategy, the results are compared with a non optimal control strategy, particularly with respect to results produced by an industrial Proportional Integral Derivative (PID) Honeywell controller, which is tuned using the Ziegler-Nichols method. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

CBM First-level Event Selector Input Interface Demonstrator

Science.gov (United States)

Hutter, Dirk; de Cuveland, Jan; Lindenstruth, Volker

2017-10-01

CBM is a heavy-ion experiment at the future FAIR facility in Darmstadt, Germany. Featuring self-triggered front-end electronics and free-streaming read-out, event selection will exclusively be done by the First Level Event Selector (FLES). Designed as an HPC cluster with several hundred nodes its task is an online analysis and selection of the physics data at a total input data rate exceeding 1 TByte/s. To allow efficient event selection, the FLES performs timeslice building, which combines the data from all given input links to self-contained, potentially overlapping processing intervals and distributes them to compute nodes. Partitioning the input data streams into specialized containers allows performing this task very efficiently. The FLES Input Interface defines the linkage between the FEE and the FLES data transport framework. A custom FPGA PCIe board, the FLES Interface Board (FLIB), is used to receive data via optical links and transfer them via DMA to the host’s memory. The current prototype of the FLIB features a Kintex-7 FPGA and provides up to eight 10 GBit/s optical links. A custom FPGA design has been developed for this board. DMA transfers and data structures are optimized for subsequent timeslice building. Index tables generated by the FPGA enable fast random access to the written data containers. In addition the DMA target buffers can directly serve as InfiniBand RDMA source buffers without copying the data. The usage of POSIX shared memory for these buffers allows data access from multiple processes. An accompanying HDL module has been developed to integrate the FLES link into the front-end FPGA designs. It implements the front-end logic interface as well as the link protocol. Prototypes of all Input Interface components have been implemented and integrated into the FLES test framework. This allows the implementation and evaluation of the foreseen CBM read-out chain.

Learning Structure of Sensory Inputs with Synaptic Plasticity Leads to Interference

Directory of Open Access Journals (Sweden)

Joseph eChrol-Cannon

2015-08-01

Full Text Available Synaptic plasticity is often explored as a form of unsupervised adaptationin cortical microcircuits to learn the structure of complex sensoryinputs and thereby improve performance of classification and prediction. The question of whether the specific structure of the input patterns is encoded in the structure of neural networks has been largely neglected. Existing studies that have analyzed input-specific structural adaptation have used simplified, synthetic inputs in contrast to complex and noisy patterns found in real-world sensory data.In this work, input-specific structural changes are analyzed forthree empirically derived models of plasticity applied to three temporal sensory classification tasks that include complex, real-world visual and auditory data. Two forms of spike-timing dependent plasticity (STDP and the Bienenstock-Cooper-Munro (BCM plasticity rule are used to adapt the recurrent network structure during the training process before performance is tested on the pattern recognition tasks.It is shown that synaptic adaptation is highly sensitive to specific classes of input pattern. However, plasticity does not improve the performance on sensory pattern recognition tasks, partly due to synaptic interference between consecutively presented input samples. The changes in synaptic strength produced by one stimulus are reversed by thepresentation of another, thus largely preventing input-specific synaptic changes from being retained in the structure of the network.To solve the problem of interference, we suggest that models of plasticitybe extended to restrict neural activity and synaptic modification to a subset of the neural circuit, which is increasingly found to be the casein experimental neuroscience.

Effects of heat input on the pitting resistance of Inconel 625 welds by overlay welding

Science.gov (United States)

Kim, Jun Seok; Park, Young IL; Lee, Hae Woo

2015-03-01

The objective of this study was to establish the relationship between the dilution ratio of the weld zone and pitting resistance depending on the heat input to welding of the Inconel alloy. Each specimen was produced by electroslag welding using Inconel 625 as the filler metal. In the weld zone of each specimen, dendrite grains were observed near the fusion line and equiaxed grains were observed on the surface. It was also observed that a melted zone with a high Fe content was formed around the fusion line, which became wider as the welding heat input increased. In order to evaluate the pitting resistance, potentiodynamic polarization tests and CPT tests were conducted. The results of these tests confirmed that there is no difference between the pitting resistances of each specimen, as the structures of the surfaces were identical despite the effect of the differences in the welding heat input for each specimen and the minor dilution effect on the surface.

Input filter compensation for switching regulators

Science.gov (United States)

Lee, F. C.; Kelkar, S. S.

1982-01-01

The problems caused by the interaction between the input filter, output filter, and the control loop are discussed. The input filter design is made more complicated because of the need to avoid performance degradation and also stay within the weight and loss limitations. Conventional input filter design techniques are then dicussed. The concept of pole zero cancellation is reviewed; this concept is the basis for an approach to control the peaking of the output impedance of the input filter and thus mitigate some of the problems caused by the input filter. The proposed approach for control of the peaking of the output impedance of the input filter is to use a feedforward loop working in conjunction with feedback loops, thus forming a total state control scheme. The design of the feedforward loop for a buck regulator is described. A possible implementation of the feedforward loop design is suggested.

Radionuclides in the oceans inputs and inventories

International Nuclear Information System (INIS)

Guegueniat, P.; Germain, P.; Metivier, H.

1996-01-01

Ten years after Chernobyl, following the decision by France to end nuclear weapon testing in the Pacific ocean, after the end of the OECD-NEA Coordinated Research and Environmental Surveillance programme related to low-level waste dumping in the deep ocean, and one hundred years after the discovery of radioactivity, the IPSN wanted to compile and review the available information on artificial radioactivity levels in seas and oceans. International experts have been invited to present data on inputs and inventories of radionuclides in the marine environment, and to describe the evolution of radioactivity levels in water, sediments and living organisms. Different sources of radionuclides present in the aquatic environment are described: atmospheric fallout before and after Chernobyl, industrial wastes, dumped wastes and ships, nuclear ship accidents, river inputs, earth-sea atmospheric transfers and experimental sites for nuclear testing. Radioactivity levels due to these sources are dealt with at ocean (Atlantic, Pacific and Indian) and sea level (Channel, North Sea, Irish Sea, Mediterranean, Baltic, Black Sea and Arctic seas). These data collected in the present book give an up-to-date assessment of radionuclide distributions which will be very useful to address scientific and wider public concerns about radionuclides found in the aquatic environment. It gives many references useful to those who want to deepen their understanding of particular aspects of marine radioecology. (authors)

Implicit and explicit anti-fat bias among a large sample of medical doctors by BMI, race/ethnicity and gender.

Directory of Open Access Journals (Sweden)

Janice A Sabin

Full Text Available Overweight patients report weight discrimination in health care settings and subsequent avoidance of routine preventive health care. The purpose of this study was to examine implicit and explicit attitudes about weight among a large group of medical doctors (MDs to determine the pervasiveness of negative attitudes about weight among MDs. Test-takers voluntarily accessed a public Web site, known as Project Implicit®, and opted to complete the Weight Implicit Association Test (IAT (N = 359,261. A sub-sample identified their highest level of education as MD (N = 2,284. Among the MDs, 55% were female, 78% reported their race as white, and 62% had a normal range BMI. This large sample of test-takers showed strong implicit anti-fat bias (Cohen's d = 1.0. MDs, on average, also showed strong implicit anti-fat bias (Cohen's d = 0.93. All test-takers and the MD sub-sample reported a strong preference for thin people rather than fat people or a strong explicit anti-fat bias. We conclude that strong implicit and explicit anti-fat bias is as pervasive among MDs as it is among the general public. An important area for future research is to investigate the association between providers' implicit and explicit attitudes about weight, patient reports of weight discrimination in health care, and quality of care delivered to overweight patients.

Facilitating mathematics learning for students with upper extremity disabilities using touch-input system.

Science.gov (United States)

Choi, Kup-Sze; Chan, Tak-Yin

2015-03-01

To investigate the feasibility of using tablet device as user interface for students with upper extremity disabilities to input mathematics efficiently into computer. A touch-input system using tablet device as user interface was proposed to assist these students to write mathematics. User-switchable and context-specific keyboard layouts were designed to streamline the input process. The system could be integrated with conventional computer systems only with minor software setup. A two-week pre-post test study involving five participants was conducted to evaluate the performance of the system and collect user feedback. The mathematics input efficiency of the participants was found to improve during the experiment sessions. In particular, their performance in entering trigonometric expressions by using the touch-input system was significantly better than that by using conventional mathematics editing software with keyboard and mouse. The participants rated the touch-input system positively and were confident that they could operate at ease with more practice. The proposed touch-input system provides a convenient way for the students with hand impairment to write mathematics and has the potential to facilitate their mathematics learning. Implications for Rehabilitation Students with upper extremity disabilities often face barriers to learning mathematics which is largely based on handwriting. Conventional computer user interfaces are inefficient for them to input mathematics into computer. A touch-input system with context-specific and user-switchable keyboard layouts was designed to improve the efficiency of mathematics input. Experimental results and user feedback suggested that the system has the potential to facilitate mathematics learning for the students.

Comparing apples and oranges: fold-change detection of multiple simultaneous inputs.

Directory of Open Access Journals (Sweden)

Yuval Hart

Full Text Available Sensory systems often detect multiple types of inputs. For example, a receptor in a cell-signaling system often binds multiple kinds of ligands, and sensory neurons can respond to different types of stimuli. How do sensory systems compare these different kinds of signals? Here, we consider this question in a class of sensory systems - including bacterial chemotaxis- which have a property known as fold-change detection: their output dynamics, including amplitude and response time, depends only on the relative changes in signal, rather than absolute changes, over a range of several decades of signal. We analyze how fold-change detection systems respond to multiple signals, using mathematical models. Suppose that a step of fold F1 is made in input 1, together with a step of F2 in input 2. What total response does the system provide? We show that when both input signals impact the same receptor with equal number of binding sites, the integrated response is multiplicative: the response dynamics depend only on the product of the two fold changes, F1F2. When the inputs bind the same receptor with different number of sites n1 and n2, the dynamics depend on a product of power laws, [Formula: see text]. Thus, two input signals which vary over time in an inverse way can lead to no response. When the two inputs affect two different receptors, other types of integration may be found and generally the system is not constrained to respond according to the product of the fold-change of each signal. These predictions can be readily tested experimentally, by providing cells with two simultaneously varying input signals. The present study suggests how cells can compare apples and oranges, namely by comparing each to its own background level, and then multiplying these two fold-changes.

7 CFR 3430.607 - Stakeholder input.

Science.gov (United States)

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Stakeholder input. 3430.607 Section 3430.607 Agriculture Regulations of the Department of Agriculture (Continued) COOPERATIVE STATE RESEARCH, EDUCATION... § 3430.607 Stakeholder input. CSREES shall seek and obtain stakeholder input through a variety of forums...

Chicxulub: testing for post-impact hydrothermal inputs into the Tertiary ocean

Science.gov (United States)

Rowe, A.; Wilkinson, J.; Morgan, J.

2003-04-01

Large terrestrial impacts produce intense fracturing of the crust and large melt sheets, providing ideal conditions for extensive hydrothermal circulation. In marine settings, such as Chicxulub, there is the potential for downward penetration of cold seawater, heating by the thermal anomaly at the impact site and leaching of metals, prior to buoyancy driven flow back to the surface. There, fluids may undergo venting into the water column. A large proportion of the metals in such vent fluids precipitate close to the site of discharge; however, a proportion of the fluid is dispersed as a hydrothermal plume. Dissolved and particulate materials (in particular manganese and iron oxyhydroxides) can be carried for several hundreds of kilometers, before falling out to form metal-rich sediments. A series of Tertiary core samples has been obtained from the International Continental Drilling Program at Chicxulub (CSDP). These comprise fine-grained cream coloured carbonate sediments with fine laminations. Transmitted light and cathodoluminescence petrography have been used to carry out a preliminary characterization of the samples. Multi-element analysis has also been undertaken by ICP-AES. Samples were reduced to powder and digested using a nitric-perchloric-hydrofluoric acid attack. Rare earth elements (REE) have been analysed by ICP-MS and solutions were prepared using a modified nitric-perchloric-hydrofluoric acid attack. Geochemical analyses have been carried out to test for characteristic signals of hydrothermal input, such as enrichments in Mn, Fe, Cu, Zn, Pb, Mg, Ba, Co, Cr and Ni. The REE are scavenged from seawater onto iron oxide surfaces in the plume; hence anomalous REE concentrations are also indicative of hydrothermal addition. Furthermore, the type of anomaly can differentiate between sediments proximal (+ve Eu) distal (-ve Ce) to the vent site. The stratigraphic extent of any anomalies can be used to constrain the duration of any post-impact circulation. The

World Input-Output Network.

Directory of Open Access Journals (Sweden)

Federica Cerina

Full Text Available Production systems, traditionally analyzed as almost independent national systems, are increasingly connected on a global scale. Only recently becoming available, the World Input-Output Database (WIOD is one of the first efforts to construct the global multi-regional input-output (GMRIO tables. By viewing the world input-output system as an interdependent network where the nodes are the individual industries in different economies and the edges are the monetary goods flows between industries, we analyze respectively the global, regional, and local network properties of the so-called world input-output network (WION and document its evolution over time. At global level, we find that the industries are highly but asymmetrically connected, which implies that micro shocks can lead to macro fluctuations. At regional level, we find that the world production is still operated nationally or at most regionally as the communities detected are either individual economies or geographically well defined regions. Finally, at local level, for each industry we compare the network-based measures with the traditional methods of backward linkages. We find that the network-based measures such as PageRank centrality and community coreness measure can give valuable insights into identifying the key industries.

Augmented Input Reveals Word Deafness in a Man with Frontotemporal Dementia

Directory of Open Access Journals (Sweden)

Chris Gibbons

2012-01-01

Full Text Available We describe a 57 year old, right handed, English speaking man initially diagnosed with progressive aphasia. Language assessment revealed inconsistent performance in key areas. Expressive language was reduced to a few short, perseverative phrases. Speech was severely apraxic. Primary modes of communication included gesture, pointing, gaze, physical touch and leading. Responses were 100% accurate when he was provided with written words, with random or inaccurate responses for strictly auditory/verbal input. When instructions to subsequent neuropsychological tests were written instead of spoken, performance improved markedly. A comprehensive audiology assessment revealed no hearing impairment. Neuroimaging was unremarkable. Neurobehavioral evaluation utilizing written input led to diagnoses of word deafness and frontotemporal dementia, resulting in very different management. We highlight the need for alternative modes of language input for assessment and treatment of patients with language comprehension symptoms.

7 CFR 3430.15 - Stakeholder input.

Science.gov (United States)

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Stakeholder input. 3430.15 Section 3430.15... Stakeholder input. Section 103(c)(2) of the Agricultural Research, Extension, and Education Reform Act of 1998... RFAs for competitive programs. CSREES will provide instructions for submission of stakeholder input in...

Input description for BIOPATH

International Nuclear Information System (INIS)

Marklund, J.E.; Bergstroem, U.; Edlund, O.

1980-01-01

The computer program BIOPATH describes the flow of radioactivity within a given ecosystem after a postulated release of radioactive material and the resulting dose for specified population groups. The present report accounts for the input data necessary to run BIOPATH. The report also contains descriptions of possible control cards and an input example as well as a short summary of the basic theory.(author)

Education Inputs, Student Performance and School Finance Reform in Michigan

Science.gov (United States)

Chaudhary, Latika

2009-01-01

This paper estimates the impact of the Michigan school finance reform, "Proposal A," on education inputs and test scores. Using a difference-in-difference estimation strategy, I find that school districts in Michigan used the increase in educational spending generated through "Proposal A" to increase teacher salaries and reduce…

LISA Pathfinder: hardware tests and their input to the mission

Science.gov (United States)

Audley, Heather

The Laser Interferometer Space Antenna (LISA) is a joint ESA-NASA mission for the first space-borne gravitational wave detector. LISA aims to detect sources in the 0.1mHz to 1Hz range, which include supermassive black holes and galactic binary stars. Core technologies required for the LISA mission, including drag-free test mass control, picometre interferometry and micro-Newton thrusters, cannot be tested on-ground. Therefore, a precursor satellite, LISA Pathfinder, has been developed as a technology demonstration mission. The preparations for the LISA Pathfinder mission have reached an exciting stage. Tests of the engineering model of the optical metrology system have recently been completed at the Albert Einstein Institute, Hannover, and flight model tests are now underway. Significantly, they represent the first complete integration and testing of the space-qualified hardware and are the first tests on system level. The results and test procedures of these campaigns will be utilised directly in the ground-based flight hardware tests, and subsequently within in-flight operations. In addition, they allow valuable testing of the data analysis methods using the MatLab based LTP data analysis toolbox. This contribution presents an overview of the test campaigns calibration, control and perfor-mance results, focusing on the implications for the Experimental Master Plan which provides the basis for the in-flight operations and procedures.

Bio science: genetic genealogy testing and the pursuit of African ancestry.

Science.gov (United States)

Nelson, Alondra

2008-10-01

This paper considers the extent to which the geneticization of 'race' and ethnicity is the prevailing outcome of genetic testing for genealogical purposes. The decoding of the human genome precipitated a change of paradigms in genetics research, from an emphasis on genetic similarity to a focus on molecular-level differences among individuals and groups. This shift from lumping to splitting spurred ongoing disagreements among scholars about the significance of 'race' and ethnicity in the genetics era. I characterize these divergent perspectives as 'pragmatism' and 'naturalism'. Drawing upon ethnographic fieldwork and interviews, I argue that neither position fully accounts for how understandings of 'race' and ethnicity are being transformed with genetic genealogy testing. While there is some acquiescence to genetic thinking about ancestry, and by implication, 'race', among African-American and black British consumers of genetic genealogy testing, test-takers also adjudicate between sources of genealogical information and from these construct meaningful biographical narratives. Consumers engage in highly situated 'objective' and 'affiliative' self-fashioning, interpreting genetic test results in the context of their 'genealogical aspirations'. I conclude that issues of site, scale, and subjectification must be attended to if scholars are to understand whether and to what extent social identities are being transformed by recent developments in genetic science.

Distance-Ranked Fault Identification of Reconfigurable Hardware Bitstreams via Functional Input

Directory of Open Access Journals (Sweden)

Naveed Imran

2014-01-01

Full Text Available Distance-Ranked Fault Identification (DRFI is a dynamic reconfiguration technique which employs runtime inputs to conduct online functional testing of fielded FPGA logic and interconnect resources without test vectors. At design time, a diverse set of functionally identical bitstream configurations are created which utilize alternate hardware resources in the FPGA fabric. An ordering is imposed on the configuration pool as updated by the PageRank indexing precedence. The configurations which utilize permanently damaged resources and hence manifest discrepant outputs, receive lower rank are thus less preferred for instantiation on the FPGA. Results indicate accurate identification of fault-free configurations in a pool of pregenerated bitstreams with a low number of reconfigurations and input evaluations. For MCNC benchmark circuits, the observed reduction in input evaluations is up to 75% when comparing the DRFI technique to unguided evaluation. The DRFI diagnosis method is seen to isolate all 14 healthy configurations from a pool of 100 pregenerated configurations, and thereby offering a 100% isolation accuracy provided the fault-free configurations exist in the design pool. When a complete recovery is not feasible, graceful degradation may be realized which is demonstrated by the PSNR improvement of images processed in a video encoder case study.

Modeling and generating input processes

Energy Technology Data Exchange (ETDEWEB)

Johnson, M.E.

1987-01-01

This tutorial paper provides information relevant to the selection and generation of stochastic inputs to simulation studies. The primary area considered is multivariate but much of the philosophy at least is relevant to univariate inputs as well. 14 refs.

Segmented correlation measurements on superconducting bandpass delta-sigma modulator with and without input tone

International Nuclear Information System (INIS)

Bulzacchelli, John F; Lee, Hae-Seung; Hong, Merit Y; Misewich, James A; Ketchen, Mark B

2003-01-01

Segmented correlation is a useful technique for testing a superconducting analogue-to-digital converter, as it allows the output spectrum to be estimated with fine frequency resolution even when data record lengths are limited by small on-chip acquisition memories. Previously, we presented segmented correlation measurements on a superconducting bandpass delta-sigma modulator sampling at 40.2 GHz under idle channel (no input) conditions. This paper compares the modulator output spectra measured by segmented correlation with and without an input tone. Important practical considerations of calculating segmented correlations are discussed in detail. Resolution enhancement by segmented correlation does reduce the spectral width of the input tone in the desired manner, but the signal power due to the input increases the variance of the spectral estimate near the input frequency, hindering accurate calculation of the in-band noise. This increased variance, which is predicted by theory, must be considered carefully in the application of segmented correlation. Methods for obtaining more accurate estimates of the quantization noise spectrum which are closer to those measured with no input are described

Stereotype Threat, Inquiring about Test Takers' Race and Gender, and Performance on Low-Stakes Tests in a Large-Scale Assessment. Research Report. ETS RR-15-02

Science.gov (United States)

Stricker, Lawrence J.; Rock, Donald A.; Bridgeman, Brent

2015-01-01

This study explores stereotype threat on low-stakes tests used in a large-scale assessment, math and reading tests in the Education Longitudinal Study of 2002 (ELS). Issues identified in laboratory research (though not observed in studies of high-stakes tests) were assessed: whether inquiring about their race and gender is related to the…

Optimizing multiple-choice tests as tools for learning.

Science.gov (United States)

Little, Jeri L; Bjork, Elizabeth Ligon

2015-01-01

Answering multiple-choice questions with competitive alternatives can enhance performance on a later test, not only on questions about the information previously tested, but also on questions about related information not previously tested-in particular, on questions about information pertaining to the previously incorrect alternatives. In the present research, we assessed a possible explanation for this pattern: When multiple-choice questions contain competitive incorrect alternatives, test-takers are led to retrieve previously studied information pertaining to all of the alternatives in order to discriminate among them and select an answer, with such processing strengthening later access to information associated with both the correct and incorrect alternatives. Supporting this hypothesis, we found enhanced performance on a later cued-recall test for previously nontested questions when their answers had previously appeared as competitive incorrect alternatives in the initial multiple-choice test, but not when they had previously appeared as noncompetitive alternatives. Importantly, however, competitive alternatives were not more likely than noncompetitive alternatives to be intruded as incorrect responses, indicating that a general increased accessibility for previously presented incorrect alternatives could not be the explanation for these results. The present findings, replicated across two experiments (one in which corrective feedback was provided during the initial multiple-choice testing, and one in which it was not), thus strongly suggest that competitive multiple-choice questions can trigger beneficial retrieval processes for both tested and related information, and the results have implications for the effective use of multiple-choice tests as tools for learning.

Development of a Math Input Interface with Flick Operation for Mobile Devices

Science.gov (United States)

Nakamura, Yasuyuki; Nakahara, Takahiro

2016-01-01

Developing online test environments for e-learning for mobile devices will be useful to increase drill practice opportunities. In order to provide a drill practice environment for calculus using an online math test system, such as STACK, we develop a flickable math input interface that can be easily used on mobile devices. The number of taps…

Wave energy input into the Ekman layer

Institute of Scientific and Technical Information of China (English)

2008-01-01

This paper is concerned with the wave energy input into the Ekman layer, based on 3 observational facts that surface waves could significantly affect the profile of the Ekman layer. Under the assumption of constant vertical diffusivity, the analytical form of wave energy input into the Ekman layer is derived. Analysis of the energy balance shows that the energy input to the Ekman layer through the wind stress and the interaction of the Stokes-drift with planetary vorticity can be divided into two kinds. One is the wind energy input, and the other is the wave energy input which is dependent on wind speed, wave characteristics and the wind direction relative to the wave direction. Estimates of wave energy input show that wave energy input can be up to 10% in high-latitude and high-wind speed areas and higher than 20% in the Antarctic Circumpolar Current, compared with the wind energy input into the classical Ekman layer. Results of this paper are of significance to the study of wave-induced large scale effects.

"A Fair Go for All?" Australia's Language-in-Migration Policy

Science.gov (United States)

Hoang, Ngoc T. H.; Hamid, M. Obaidul

2017-01-01

As the power of tests lies in their uses, language tests that are used to assess immigration eligibility exercise enormous power. Critical Language Testing calls for exposing the power of tests by examining the intentions of introducing tests and their effects on individuals and society, especially from the perspective of test-takers. This case…

Modelling of Multi Input Transfer Function for Rainfall Forecasting in Batu City

Directory of Open Access Journals (Sweden)

Priska Arindya Purnama

2017-11-01

Full Text Available The aim of this research is to model and forecast the rainfall in Batu City using multi input transfer function model based on air temperature, humidity, wind speed and cloud. Transfer function model is a multivariate time series model which consists of an output series (Yt sequence expected to be effected by an input series (Xt and other inputs in a group called a noise series (Nt. Multi input transfer function model obtained is (b1,s1,r1 (b2,s2,r2 (b3,s3,r3 (b4,s4,r4(pn,qn = (0,0,0 (23,0,0 (1,2,0 (0,0,0 ([5,8],2 and shows that air temperature on t-day affects rainfall on t-day, rainfall on t-day is influenced by air humidity in the previous 23 days, rainfall on t-day is affected by wind speed in the previous day , and rainfall on day t is affected by clouds on day t. The results of rainfall forecasting in Batu City with multi input transfer function model can be said to be accurate, because it produces relatively small RMSE value. The value of RMSE data forecasting training is 7.7921 while forecasting data testing is 4.2184. Multi-input transfer function model is suitable for rainfall in Batu City.

A procedure to generate input data of cyclic softening and hardening for FEM analysis from constant strain amplitude fatigue tests in LCF regime

International Nuclear Information System (INIS)

Sarajaervi, U.; Cronvall, O.

2007-03-01

Fatigue is produced by cyclic application of stresses by mechanical or thermal loading. The metal subjected to fluctuating stress will fail at stresses much lower than those required to cause fracture in a single application of load. The key parameters are the range of stress variation and the number of its occurrences. Low-cycle fatigue, usually induced by mechanical and thermal loads, is distinguished from high-cycle fatigue, mainly associated with vibration or high number of small thermal fluctuations. Numerical models describing fatigue behaviour of austenitic stainless piping steels under cyclic loading and their applicability for modelling of low-cycle-fatigue are discussed in this report. In order to describe the cyclic behaviour of the material for analysis with finite element method (FEM) based analysis code ABAQUS, the test data, i.e. stress-strain curves, have to be processed. A code to process the data all through the test duration was developed within this study. A description of this code is given also in this report. Input data for ABAQUS was obtained to describe both kinematic and isotropic hardening properties. Further, by combining the result data for various strain amplitudes a mathematic expression was be created which allows defining a parameter surface for cyclic (i.e. isotropic) hardening. Input data for any strain amplitude within the range of minimum and maximum strain amplitudes of the test data can be assessed with the help of the developed 3D stress-strain surface presentation. The modelling of the fatigue induced initiation and growth of cracks was not considered in this study. On the other hand, a considerable part of the fatigue life of nuclear power plant (NPP) piping components is spent in the phase preceding the initiation and growth of cracks. (au)

A procedure to generate input data of cyclic softening and hardening for FEM analysis from constant strain amplitude fatigue tests in LCF regime

Energy Technology Data Exchange (ETDEWEB)

Sarajaervi, U.; Cronvall, O. [VTT (Finland)

2007-03-15

Fatigue is produced by cyclic application of stresses by mechanical or thermal loading. The metal subjected to fluctuating stress will fail at stresses much lower than those required to cause fracture in a single application of load. The key parameters are the range of stress variation and the number of its occurrences. Low-cycle fatigue, usually induced by mechanical and thermal loads, is distinguished from high-cycle fatigue, mainly associated with vibration or high number of small thermal fluctuations. Numerical models describing fatigue behaviour of austenitic stainless piping steels under cyclic loading and their applicability for modelling of low-cycle-fatigue are discussed in this report. In order to describe the cyclic behaviour of the material for analysis with finite element method (FEM) based analysis code ABAQUS, the test data, i.e. stress-strain curves, have to be processed. A code to process the data all through the test duration was developed within this study. A description of this code is given also in this report. Input data for ABAQUS was obtained to describe both kinematic and isotropic hardening properties. Further, by combining the result data for various strain amplitudes a mathematic expression was be created which allows defining a parameter surface for cyclic (i.e. isotropic) hardening. Input data for any strain amplitude within the range of minimum and maximum strain amplitudes of the test data can be assessed with the help of the developed 3D stress-strain surface presentation. The modelling of the fatigue induced initiation and growth of cracks was not considered in this study. On the other hand, a considerable part of the fatigue life of nuclear power plant (NPP) piping components is spent in the phase preceding the initiation and growth of cracks. (au)

Sensitivity of traffic input parameters on rutting performance of a flexible pavement using Mechanistic Empirical Pavement Design Guide

Directory of Open Access Journals (Sweden)

Nur Hossain

2016-11-01

Full Text Available The traffic input parameters in the Mechanistic Empirical Pavement Design Guide (MEPDG are: (a general traffic inputs, (b traffic volume adjustment factors, and (c axle load spectra (ALS. Of these three traffic inputs, the traffic volume adjustment factors specifically monthly adjustment factor (MAF and the ALS are widely considered to be important and sensitive factors, which can significantly affect design of and prediction of distress in flexible pavements. Therefore, the present study was undertaken to assess the sensitivity of ALS and MAF traffic inputs on rutting distress of a flexible pavement. The traffic data of four years (from 2008 to 2012 were collected from an instrumented test section on I-35 in Oklahoma. Site specific traffic input parameters were developed. It was observed that significant differences exist between the MEPDG default and developed site-specific traffic input values. However, the differences in the yearly ALS and MAF data, developed for these four years, were not found to be as significant when compared to one another. In addition, quarterly field rut data were measured on the test section and compared with the MEPDG predicted rut values using the default and developed traffic input values for different years. It was found that significant differences exist between the measured rut and the MEPDG (AASHTOWare-ME predicted rut when default values were used. Keywords: MEPDG, Rut, Level 1 inputs, Axle load spectra, Traffic input parameters, Sensitivity

The Effects of Input Flood and Consciousness-Raising Approach on Collocation Knowledge Development of Language Learners

Directory of Open Access Journals (Sweden)

Elaheh Hamed Mahvelati

2012-11-01

Full Text Available Many researchers stress the importance of lexical coherence and emphasize the need for teaching collocations at all levels of language proficiency. Thus, this study was conducted to measure the relative effectiveness of explicit (consciousness-raising approach versus implicit (input flood collocation instruction with regard to learners’ knowledge of both lexical and grammatical collocations. Ninety-five upper-intermediate learners, who were randomly assigned to the control and experimental groups, served as the participants of this study. While one of the experimental groups was provided with input flood treatment, the other group received explicit collocation instruction. In contrast, the participants in the control group did not receive any instruction on learning collocations. The results of the study, which were collected through pre-test, immediate post-test and delayed post-test, revealed that although both methods of teaching collocations proved effective, the explicit method of consciousness-raising approach was significantly superior to the implicit method of input flood treatment.

Analysis test of understanding of vectors with the three-parameter logistic model of item response theory and item response curves technique

Science.gov (United States)

Rakkapao, Suttida; Prasitpong, Singha; Arayathanitkul, Kwan

2016-12-01

This study investigated the multiple-choice test of understanding of vectors (TUV), by applying item response theory (IRT). The difficulty, discriminatory, and guessing parameters of the TUV items were fit with the three-parameter logistic model of IRT, using the parscale program. The TUV ability is an ability parameter, here estimated assuming unidimensionality and local independence. Moreover, all distractors of the TUV were analyzed from item response curves (IRC) that represent simplified IRT. Data were gathered on 2392 science and engineering freshmen, from three universities in Thailand. The results revealed IRT analysis to be useful in assessing the test since its item parameters are independent of the ability parameters. The IRT framework reveals item-level information, and indicates appropriate ability ranges for the test. Moreover, the IRC analysis can be used to assess the effectiveness of the test's distractors. Both IRT and IRC approaches reveal test characteristics beyond those revealed by the classical analysis methods of tests. Test developers can apply these methods to diagnose and evaluate the features of items at various ability levels of test takers.

75 FR 76468 - Agency Information Collection Request; 30-Day Public Comment Request

Science.gov (United States)

2010-12-08

... Coordinator for Health Information Technology (ONC), HHS. In compliance with the requirement of section 3506(c... members, and competency exam takers; and a Web-based survey of community college faculty. Estimated... Workforce program. Focus groups with Exam takers Competency exam 32 1 1.5 48 takers not enrolled in...

Measuring receptive collocational competence across proficiency ...

African Journals Online (AJOL)

Kate H

frequency bands. A proficiency measure and a collocation test were administered to English ... battery may negatively impact the test-takers' performance. ..... examples. The major finding is that raising learners' awareness constitutes the best way forward ..... Amsterdam: John Benjamins Publishing Company. Green, R.

Automated Testing of Event-Driven Applications

DEFF Research Database (Denmark)

Jensen, Casper Svenning

may be tested by selecting an interesting input (i.e. a sequence of events), and deciding if a failure occurs when the selected input is applied to the event-driven application under test. Automated testing promises to reduce the workload for developers by automatically selecting interesting inputs...... and detect failures. However, it is non-trivial to conduct automated testing of event-driven applications because of, for example, infinite input spaces and the absence of specifications of correct application behavior. In this PhD dissertation, we identify a number of specific challenges when conducting...... automated testing of event-driven applications, and we present novel techniques for solving these challenges. First, we present an algorithm for stateless model-checking of event-driven applications with partial-order reduction, and we show how this algorithm may be used to systematically test web...

Anterior Cingulate Cortex Input to the Claustrum Is Required for Top-Down Action Control

Directory of Open Access Journals (Sweden)

Michael G. White

2018-01-01

Full Text Available Summary: Cognitive abilities, such as volitional attention, operate under top-down, executive frontal cortical control of hierarchically lower structures. The circuit mechanisms underlying this process are unresolved. The claustrum possesses interconnectivity with many cortical areas and, thus, is hypothesized to orchestrate the cortical mantle for top-down control. Whether the claustrum receives top-down input and how this input may be processed by the claustrum have yet to be formally tested, however. We reveal that a rich anterior cingulate cortex (ACC input to the claustrum encodes a preparatory top-down information signal on a five-choice response assay that is necessary for optimal task performance. We further show that ACC input monosynaptically targets claustrum inhibitory interneurons and spiny glutamatergic projection neurons, the latter of which amplify ACC input in a manner that is powerfully constrained by claustrum inhibitory microcircuitry. These results demonstrate ACC input to the claustrum is critical for top-down control guiding action. : White et al. show that anterior cingulate cortex (ACC input to the claustrum encodes a top-down preparatory signal on a 5-choice response assay that is critical for task performance. Claustrum microcircuitry amplifies top-down ACC input in a frequency-dependent manner for eventual propagation to the cortex for cognitive control of action. Keywords: 5CSRTT, optogenetics, fiber photometry, microcircuit, attention, bottom-up, sensory cortices, motor cortices

Gestures and multimodal input

OpenAIRE

Keates, Simeon; Robinson, Peter

1999-01-01

For users with motion impairments, the standard keyboard and mouse arrangement for computer access often presents problems. Other approaches have to be adopted to overcome this. In this paper, we will describe the development of a prototype multimodal input system based on two gestural input channels. Results from extensive user trials of this system are presented. These trials showed that the physical and cognitive loads on the user can quickly become excessive and detrimental to the interac...

The Importance of Input and Interaction in SLA

Institute of Scientific and Technical Information of China (English)

党春花

2009-01-01

As is known to us, input and interaction play the crucial roles in second language acquisition (SLA). Different linguistic schools have different explanations to input and interaction Behaviorist theories hold a view that input is composed of stimuli and response, putting more emphasis on the importance of input, while mentalist theories find input is a necessary condition to SLA, not a sufficient condition. At present, social interaction theories, which is one type of cognitive linguistics, suggests that besides input, interaction is also essential to language acquisition. Then, this essay will discuss how input and interaction result in SLA.

Analysis test of understanding of vectors with the three-parameter logistic model of item response theory and item response curves technique

Directory of Open Access Journals (Sweden)

Suttida Rakkapao

2016-10-01

Full Text Available This study investigated the multiple-choice test of understanding of vectors (TUV, by applying item response theory (IRT. The difficulty, discriminatory, and guessing parameters of the TUV items were fit with the three-parameter logistic model of IRT, using the parscale program. The TUV ability is an ability parameter, here estimated assuming unidimensionality and local independence. Moreover, all distractors of the TUV were analyzed from item response curves (IRC that represent simplified IRT. Data were gathered on 2392 science and engineering freshmen, from three universities in Thailand. The results revealed IRT analysis to be useful in assessing the test since its item parameters are independent of the ability parameters. The IRT framework reveals item-level information, and indicates appropriate ability ranges for the test. Moreover, the IRC analysis can be used to assess the effectiveness of the test’s distractors. Both IRT and IRC approaches reveal test characteristics beyond those revealed by the classical analysis methods of tests. Test developers can apply these methods to diagnose and evaluate the features of items at various ability levels of test takers.

Modality of Input and Vocabulary Acquisition

Directory of Open Access Journals (Sweden)

Tetyana Sydorenko

2010-06-01

Full Text Available This study examines the effect of input modality (video, audio, and captions, i.e., on-screen text in the same language as audio on (a the learning of written and aural word forms, (b overall vocabulary gains, (c attention to input, and (d vocabulary learning strategies of beginning L2 learners. Twenty-six second-semester learners of Russian participated in this study. Group one (N = 8 saw video with audio and captions (VAC; group two (N = 9 saw video with audio (VA; group three (N = 9 saw video with captions (VC. All participants completed written and aural vocabulary tests and a final questionnaire.The results indicate that groups with captions (VAC and VC scored higher on written than on aural recognition of word forms, while the reverse applied to the VA group. The VAC group learned more word meanings than the VA group. Results from the questionnaire suggest that learners paid most attention to captions, followed by video and audio, and acquired most words by associating them with visual images. Pedagogical implications of this study are that captioned video tends to aid recognition of written word forms and the learning of word meaning, while non-captioned video tends to improve listening comprehension as it facilitates recognition of aural word forms.

Analysis on relation between safety input and accidents

Institute of Scientific and Technical Information of China (English)

YAO Qing-guo; ZHANG Xue-mu; LI Chun-hui

2007-01-01

The number of safety input directly determines the level of safety, and there exists dialectical and unified relations between safety input and accidents. Based on the field investigation and reliable data, this paper deeply studied the dialectical relationship between safety input and accidents, and acquired the conclusions. The security situation of the coal enterprises was related to the security input rate, being effected little by the security input scale, and build the relationship model between safety input and accidents on this basis, that is the accident model.

Monitoring the Performance of Human and Automated Scores for Spoken Responses

Science.gov (United States)

Wang, Zhen; Zechner, Klaus; Sun, Yu

2018-01-01

As automated scoring systems for spoken responses are increasingly used in language assessments, testing organizations need to analyze their performance, as compared to human raters, across several dimensions, for example, on individual items or based on subgroups of test takers. In addition, there is a need in testing organizations to establish…

Spontaneous magnetic alignment by yearling snapping turtles: rapid association of radio frequency dependent pattern of magnetic input with novel surroundings.

Science.gov (United States)

Landler, Lukas; Painter, Michael S; Youmans, Paul W; Hopkins, William A; Phillips, John B

2015-01-01

We investigated spontaneous magnetic alignment (SMA) by juvenile snapping turtles using exposure to low-level radio frequency (RF) fields at the Larmor frequency to help characterize the underlying sensory mechanism. Turtles, first introduced to the testing environment without the presence of RF aligned consistently towards magnetic north when subsequent magnetic testing conditions were also free of RF ('RF off → RF off'), but were disoriented when subsequently exposed to RF ('RF off → RF on'). In contrast, animals initially introduced to the testing environment with RF present were disoriented when tested without RF ('RF on → RF off'), but aligned towards magnetic south when tested with RF ('RF on → RF on'). Sensitivity of the SMA response of yearling turtles to RF is consistent with the involvement of a radical pair mechanism. Furthermore, the effect of RF appears to result from a change in the pattern of magnetic input, rather than elimination of magnetic input altogether, as proposed to explain similar effects in other systems/organisms. The findings show that turtles first exposed to a novel environment form a lasting association between the pattern of magnetic input and their surroundings. However, under natural conditions turtles would never experience a change in the pattern of magnetic input. Therefore, if turtles form a similar association of magnetic cues with the surroundings each time they encounter unfamiliar habitat, as seems likely, the same pattern of magnetic input would be associated with multiple sites/localities. This would be expected from a sensory input that functions as a global reference frame, helping to place multiple locales (i.e., multiple local landmark arrays) into register to form a global map of familiar space.

An Investigation into Pragmatic Knowledge in the Reading Section of TOLIMO, TOEFL, and IELTS Examinations

Science.gov (United States)

Karbalaei, Alireza; Rahmanzade, Mehrnaz Kashkooli

2015-01-01

The present study focused on the analysis of listening sections of two international English proficiency tests, i.e. IELTS and TOEFL tests, and one local English proficiency test, i.e. TOLIMO from pragmatic perspective. An attempt was made to explore the areas of pragmatic knowledge presented, and to assess test takers' pragmatic knowledge. For…

Design and microwave test of an ultrawideband input/output structure for sheet beam travelling wave tubes

International Nuclear Information System (INIS)

Shu, Guoxiang; Wang, Jianxun; Liu, Guo; Yang, Liya; Luo, Yong; Wang, Shafei

2015-01-01

Broadband operation is of great importance for the applications of travelling wave tubes such as high-data communication and wideband radar. An input/output (I/O) structure operating with broadband property plays a significant role to achieve these applications. In this paper, a Y-type branch waveguide (YTBW) coupler and its improvements are proposed and utilized to construct an extremely wideband I/O structure to ensure the broadband operation for sheet beam travelling wave tubes (SB-TWTs). Cascaded reflection resonators are utilized to improve the isolation characteristic and transmission efficiency. Furthermore, to minimize the reflectivity of the port connected with the RF circuit, wave-absorbing material (WAM) is loaded in the resonator. Simulation results for the YTBW loaded with WAM predict an excellent performance with a 50.2% relative bandwidth for port reflectivity under −15 dB, transmission up to −1.5 dB, and meanwhile isolation under −20 dB. In addition, the coupler has a relatively compact configuration and the beam tunnel can be widened, which is beneficial for the propagation of the electrons. A Q-band YTBW loaded with two reflection resonators is fabricated and microwave tested. Vector network analyzer (VNA) measured results have an excellent agreement with our simulation, which verify our theoretical analysis and simulation calculation

Design and microwave test of an ultrawideband input/output structure for sheet beam travelling wave tubes

Energy Technology Data Exchange (ETDEWEB)

Shu, Guoxiang; Wang, Jianxun; Liu, Guo; Yang, Liya; Luo, Yong [School of Physical Electronics, University of Electronic Science and Technology of China, Chengdu 610054 (China); Wang, Shafei [North Electronic Device Research Institution, P.O. Box 947, Beijing 100141 (China)

2015-06-15

Broadband operation is of great importance for the applications of travelling wave tubes such as high-data communication and wideband radar. An input/output (I/O) structure operating with broadband property plays a significant role to achieve these applications. In this paper, a Y-type branch waveguide (YTBW) coupler and its improvements are proposed and utilized to construct an extremely wideband I/O structure to ensure the broadband operation for sheet beam travelling wave tubes (SB-TWTs). Cascaded reflection resonators are utilized to improve the isolation characteristic and transmission efficiency. Furthermore, to minimize the reflectivity of the port connected with the RF circuit, wave-absorbing material (WAM) is loaded in the resonator. Simulation results for the YTBW loaded with WAM predict an excellent performance with a 50.2% relative bandwidth for port reflectivity under −15 dB, transmission up to −1.5 dB, and meanwhile isolation under −20 dB. In addition, the coupler has a relatively compact configuration and the beam tunnel can be widened, which is beneficial for the propagation of the electrons. A Q-band YTBW loaded with two reflection resonators is fabricated and microwave tested. Vector network analyzer (VNA) measured results have an excellent agreement with our simulation, which verify our theoretical analysis and simulation calculation.

Mars 2.2 code manual: input requirements

International Nuclear Information System (INIS)

Chung, Bub Dong; Lee, Won Jae; Jeong, Jae Jun; Lee, Young Jin; Hwang, Moon Kyu; Kim, Kyung Doo; Lee, Seung Wook; Bae, Sung Won

2003-07-01

Korea Advanced Energy Research Institute (KAERI) conceived and started the development of MARS code with the main objective of producing a state-of-the-art realistic thermal hydraulic systems analysis code with multi-dimensional analysis capability. MARS achieves this objective by very tightly integrating the one dimensional RELAP5/MOD3 with the multi-dimensional COBRA-TF codes. The method of integration of the two codes is based on the dynamic link library techniques, and the system pressure equation matrices of both codes are implicitly integrated and solved simultaneously. In addition, the Equation-of-State (EOS) for the light water was unified by replacing the EOS of COBRA-TF by that of the RELAP5. This input manual provides a complete list of input required to run MARS. The manual is divided largely into two parts, namely, the one-dimensional part and the multi-dimensional part. The inputs for auxiliary parts such as minor edit requests and graph formatting inputs are shared by the two parts and as such mixed input is possible. The overall structure of the input is modeled on the structure of the RELAP5 and as such the layout of the manual is very similar to that of the RELAP. This similitude to RELAP5 input is intentional as this input scheme will allow minimum modification between the inputs of RELAP5 and MARS. MARS development team would like to express its appreciation to the RELAP5 Development Team and the USNRC for making this manual possible

MARS code manual volume II: input requirements

International Nuclear Information System (INIS)

Chung, Bub Dong; Kim, Kyung Doo; Bae, Sung Won; Jeong, Jae Jun; Lee, Seung Wook; Hwang, Moon Kyu

2010-02-01

Korea Advanced Energy Research Institute (KAERI) conceived and started the development of MARS code with the main objective of producing a state-of-the-art realistic thermal hydraulic systems analysis code with multi-dimensional analysis capability. MARS achieves this objective by very tightly integrating the one dimensional RELAP5/MOD3 with the multi-dimensional COBRA-TF codes. The method of integration of the two codes is based on the dynamic link library techniques, and the system pressure equation matrices of both codes are implicitly integrated and solved simultaneously. In addition, the Equation-Of-State (EOS) for the light water was unified by replacing the EOS of COBRA-TF by that of the RELAP5. This input manual provides a complete list of input required to run MARS. The manual is divided largely into two parts, namely, the one-dimensional part and the multi-dimensional part. The inputs for auxiliary parts such as minor edit requests and graph formatting inputs are shared by the two parts and as such mixed input is possible. The overall structure of the input is modeled on the structure of the RELAP5 and as such the layout of the manual is very similar to that of the RELAP. This similitude to RELAP5 input is intentional as this input scheme will allow minimum modification between the inputs of RELAP5 and MARS3.1. MARS3.1 development team would like to express its appreciation to the RELAP5 Development Team and the USNRC for making this manual possible

Robust input design for nonlinear dynamic modeling of AUV.

Science.gov (United States)

Nouri, Nowrouz Mohammad; Valadi, Mehrdad

2017-09-01

Input design has a dominant role in developing the dynamic model of autonomous underwater vehicles (AUVs) through system identification. Optimal input design is the process of generating informative inputs that can be used to generate the good quality dynamic model of AUVs. In a problem with optimal input design, the desired input signal depends on the unknown system which is intended to be identified. In this paper, the input design approach which is robust to uncertainties in model parameters is used. The Bayesian robust design strategy is applied to design input signals for dynamic modeling of AUVs. The employed approach can design multiple inputs and apply constraints on an AUV system's inputs and outputs. Particle swarm optimization (PSO) is employed to solve the constraint robust optimization problem. The presented algorithm is used for designing the input signals for an AUV, and the estimate obtained by robust input design is compared with that of the optimal input design. According to the results, proposed input design can satisfy both robustness of constraints and optimality. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Six axis force feedback input device

Science.gov (United States)

Ohm, Timothy (Inventor)

1998-01-01

The present invention is a low friction, low inertia, six-axis force feedback input device comprising an arm with double-jointed, tendon-driven revolute joints, a decoupled tendon-driven wrist, and a base with encoders and motors. The input device functions as a master robot manipulator of a microsurgical teleoperated robot system including a slave robot manipulator coupled to an amplifier chassis, which is coupled to a control chassis, which is coupled to a workstation with a graphical user interface. The amplifier chassis is coupled to the motors of the master robot manipulator and the control chassis is coupled to the encoders of the master robot manipulator. A force feedback can be applied to the input device and can be generated from the slave robot to enable a user to operate the slave robot via the input device without physically viewing the slave robot. Also, the force feedback can be generated from the workstation to represent fictitious forces to constrain the input device's control of the slave robot to be within imaginary predetermined boundaries.

Leaders’ receptivity to subordinates’ creative input: the role of achievement goals and composition of creative input

NARCIS (Netherlands)

Sijbom, R.B.L.; Janssen, O.; van Yperen, N.W.

2015-01-01

We identified leaders’ achievement goals and composition of creative input as important factors that can clarify when and why leaders are receptive to, and supportive of, subordinates’ creative input. As hypothesized, in two experimental studies, we found that relative to mastery goal leaders,

Does EFL Readers' Lexical and Grammatical Knowledge Predict Their Reading Ability? Insights from a Perceptron Artificial Neural Network Study

Science.gov (United States)

Aryadoust, Vahid; Baghaei, Purya

2016-01-01

This study aims to examine the relationship between reading comprehension and lexical and grammatical knowledge among English as a foreign language students by using an Artificial Neural Network (ANN). There were 825 test takers administered both a second-language reading test and a set of psychometrically validated grammar and vocabulary tests.…

High-frequency matrix converter with square wave input

Science.gov (United States)

Carr, Joseph Alexander; Balda, Juan Carlos

2015-03-31

A device for producing an alternating current output voltage from a high-frequency, square-wave input voltage comprising, high-frequency, square-wave input a matrix converter and a control system. The matrix converter comprises a plurality of electrical switches. The high-frequency input and the matrix converter are electrically connected to each other. The control system is connected to each switch of the matrix converter. The control system is electrically connected to the input of the matrix converter. The control system is configured to operate each electrical switch of the matrix converter converting a high-frequency, square-wave input voltage across the first input port of the matrix converter and the second input port of the matrix converter to an alternating current output voltage at the output of the matrix converter.

AR-KIO: Augmented Reality-based Application as Instructional Media on Input and Output Device Component.

Directory of Open Access Journals (Sweden)

Nur Hidayattur Rohmah

2017-12-01

Full Text Available The rapid technology development can be utilized in various fields, especially in education. For example, is augmented reality-based learning media. The learning media can be applied to all the subject matter, including the subject of input and output component devices. Based on the observations that already made, there are some problems such as there is no interactive learning media and limited props in the laboratory. Though the subject of input and output component devices require three-dimensional visualization, especially input output components that are difficult to find in the school environment. The purpose of this study is to determine the feasibility of instructional media applications that have been developed. The research method used is research development method. The tests conducted by media experts, content experts, users and smartphone devices with different specifications. Media expert testing using instruments that refer to aspects of the functionality of ISO 9126 with the percentage acquisition of 100%. Content expert testing using the instrument that refers aspects of learning design with the acquisition percentage of 88%. Meanwhile, user testing uses an instrument that refers to the usability aspect of ISO 9126 with a percentage gain of 83.4%. In addition, there are testing the software with android smartphone platform that has different specifications. The advantages of this application can run on a smartphone with minimum 512 MB RAM specs, Android OS Jelly Bean 4.3 and qHD screen resolution.

Fast metabolite identification with Input Output Kernel Regression

Science.gov (United States)

Brouard, Céline; Shen, Huibin; Dührkop, Kai; d'Alché-Buc, Florence; Böcker, Sebastian; Rousu, Juho

2016-01-01

Motivation: An important problematic of metabolomics is to identify metabolites using tandem mass spectrometry data. Machine learning methods have been proposed recently to solve this problem by predicting molecular fingerprint vectors and matching these fingerprints against existing molecular structure databases. In this work we propose to address the metabolite identification problem using a structured output prediction approach. This type of approach is not limited to vector output space and can handle structured output space such as the molecule space. Results: We use the Input Output Kernel Regression method to learn the mapping between tandem mass spectra and molecular structures. The principle of this method is to encode the similarities in the input (spectra) space and the similarities in the output (molecule) space using two kernel functions. This method approximates the spectra-molecule mapping in two phases. The first phase corresponds to a regression problem from the input space to the feature space associated to the output kernel. The second phase is a preimage problem, consisting in mapping back the predicted output feature vectors to the molecule space. We show that our approach achieves state-of-the-art accuracy in metabolite identification. Moreover, our method has the advantage of decreasing the running times for the training step and the test step by several orders of magnitude over the preceding methods. Availability and implementation: Contact: celine.brouard@aalto.fi Supplementary information: Supplementary data are available at Bioinformatics online. PMID:27307628

Textual Enhancement of Input: Issues and Possibilities

Science.gov (United States)

Han, ZhaoHong; Park, Eun Sung; Combs, Charles

2008-01-01

The input enhancement hypothesis proposed by Sharwood Smith (1991, 1993) has stimulated considerable research over the last 15 years. This article reviews the research on textual enhancement of input (TE), an area where the majority of input enhancement studies have aggregated. Methodological idiosyncrasies are the norm of this body of research.…

Brain Emotional Learning Based Intelligent Decoupler for Nonlinear Multi-Input Multi-Output Distillation Columns

Directory of Open Access Journals (Sweden)

M. H. El-Saify

2017-01-01

Full Text Available The distillation process is vital in many fields of chemical industries, such as the two-coupled distillation columns that are usually highly nonlinear Multi-Input Multi-Output (MIMO coupled processes. The control of MIMO process is usually implemented via a decentralized approach using a set of Single-Input Single-Output (SISO loop controllers. Decoupling the MIMO process into group of single loops requires proper input-output pairing and development of decoupling compensator unit. This paper proposes a novel intelligent decoupling approach for MIMO processes based on new MIMO brain emotional learning architecture. A MIMO architecture of Brain Emotional Learning Based Intelligent Controller (BELBIC is developed and applied as a decoupler for 4 input/4 output highly nonlinear coupled distillation columns process. Moreover, the performance of the proposed Brain Emotional Learning Based Intelligent Decoupler (BELBID is enhanced using Particle Swarm Optimization (PSO technique. The performance is compared with the PSO optimized steady state decoupling compensation matrix. Mathematical models of the distillation columns and the decouplers are built and tested in simulation environment by applying the same inputs. The results prove remarkable success of the BELBID in minimizing the loops interactions without degrading the output that every input has been paired with.

Design and development of CAMAC test module

International Nuclear Information System (INIS)

Kulkarni, S.G.; Gore, J. A.; Gupta, A.K.; Saxena, A.

2015-01-01

Various Computer automated measurement and control (CAMAC) modules are used in control and monitoring of Pelletron Accelerator. 24 channels CAMAC Input Gate is used for getting the ON/OFF status of various devices in the Pelletron Accelerator. If a channel has 24 V then the status is 'ON' and if the channel receives 0 V then the status is 'OFF'. Hence we can get the status of 24 different channels though one CAMAC Input Gate module. The status is transported to the PC via CAMAC controller. The manual testing of CAMAC Input Gate involves connection of 24 V to each channel and checking the status of each channel with Graphical user interface (GUI) software. This process of checking input gate is automated by developing a CAMAC Test module which is connected to CAMAC Input Gate with a 50 pin ribbon cable. The Test module automatically generates 24 V /0 V on each channel to be tested depending on the software GUI buttons labeled as 'ON'/'OFF' in labview. The status of CAMAC Input Gate is displayed on GUI for all 24 channels. Hence the user can check the working of each channel on GUI written in labview. This automated process of checking the CAMAC Input Gate saves time to debug problems in module and identifying the bad channel which can be subsequently repaired. The CAMAC Test module uses Spartan 2 FPGA which is connected to 24 transistors which in turn operates 24 relays. 24 V supply is connected to the relay secondary contacts which open/close as per the transistor inputs. The 24 V contacts are connected to the module output connector which should be connected to CAMAC Input Gate which is to be tested. (author)

Assessing cultural validity in standardized tests in stem education

Science.gov (United States)

Gassant, Lunes

This quantitative ex post facto study examined how race and gender, as elements of culture, influence the development of common misconceptions among STEM students. Primary data came from a standardized test: the Digital Logic Concept Inventory (DLCI) developed by Drs. Geoffrey L. Herman, Michael C. Louis, and Craig Zilles from the University of Illinois at Urbana-Champaign. The sample consisted of a cohort of 82 STEM students recruited from three universities in Northern Louisiana. Microsoft Excel and the Statistical Package for the Social Sciences (SPSS) were used for data computation. Two key concepts, several sub concepts, and 19 misconceptions were tested through 11 items in the DLCI. Statistical analyses based on both the Classical Test Theory (Spearman, 1904) and the Item Response Theory (Lord, 1952) yielded similar results: some misconceptions in the DLCI can reliably be predicted by the Race or the Gender of the test taker. The research is significant because it has shown that some misconceptions in a STEM discipline attracted students with similar ethnic backgrounds differently; thus, leading to the existence of some cultural bias in the standardized test. Therefore the study encourages further research in cultural validity in standardized tests. With culturally valid tests, it will be possible to increase the effectiveness of targeted teaching and learning strategies for STEM students from diverse ethnic backgrounds. To some extent, this dissertation has contributed to understanding, better, the gap between high enrollment rates and low graduation rates among African American students and also among other minority students in STEM disciplines.

Visual Working Memory Enhances the Neural Response to Matching Visual Input.

Science.gov (United States)

Gayet, Surya; Guggenmos, Matthias; Christophel, Thomas B; Haynes, John-Dylan; Paffen, Chris L E; Van der Stigchel, Stefan; Sterzer, Philipp

2017-07-12

Visual working memory (VWM) is used to maintain visual information available for subsequent goal-directed behavior. The content of VWM has been shown to affect the behavioral response to concurrent visual input, suggesting that visual representations originating from VWM and from sensory input draw upon a shared neural substrate (i.e., a sensory recruitment stance on VWM storage). Here, we hypothesized that visual information maintained in VWM would enhance the neural response to concurrent visual input that matches the content of VWM. To test this hypothesis, we measured fMRI BOLD responses to task-irrelevant stimuli acquired from 15 human participants (three males) performing a concurrent delayed match-to-sample task. In this task, observers were sequentially presented with two shape stimuli and a retro-cue indicating which of the two shapes should be memorized for subsequent recognition. During the retention interval, a task-irrelevant shape (the probe) was briefly presented in the peripheral visual field, which could either match or mismatch the shape category of the memorized stimulus. We show that this probe stimulus elicited a stronger BOLD response, and allowed for increased shape-classification performance, when it matched rather than mismatched the concurrently memorized content, despite identical visual stimulation. Our results demonstrate that VWM enhances the neural response to concurrent visual input in a content-specific way. This finding is consistent with the view that neural populations involved in sensory processing are recruited for VWM storage, and it provides a common explanation for a plethora of behavioral studies in which VWM-matching visual input elicits a stronger behavioral and perceptual response. SIGNIFICANCE STATEMENT Humans heavily rely on visual information to interact with their environment and frequently must memorize such information for later use. Visual working memory allows for maintaining such visual information in the mind

Investigating IELTS Academic Writing Task 2 : Relationships between cognitive writing processes, text quality, and working memory

NARCIS (Netherlands)

Révész, Andrea; Michel, Marije; Lee, MinJin

2017-01-01

This project examined the cognitive processes and online behaviours of second language writers while performing IELTS Academic Writing Test Task 2, and the ways in which the online behaviours of test-takers relate to the quality of the text produced. An additional aim was to assess whether writing

Effect of input compression and input frequency response on music perception in cochlear implant users.

Science.gov (United States)

Halliwell, Emily R; Jones, Linor L; Fraser, Matthew; Lockley, Morag; Hill-Feltham, Penelope; McKay, Colette M

2015-06-01

A study was conducted to determine whether modifications to input compression and input frequency response characteristics can improve music-listening satisfaction in cochlear implant users. Experiment 1 compared three pre-processed versions of music and speech stimuli in a laboratory setting: original, compressed, and flattened frequency response. Music excerpts comprised three music genres (classical, country, and jazz), and a running speech excerpt was compared. Experiment 2 implemented a flattened input frequency response in the speech processor program. In a take-home trial, participants compared unaltered and flattened frequency responses. Ten and twelve adult Nucleus Freedom cochlear implant users participated in Experiments 1 and 2, respectively. Experiment 1 revealed a significant preference for music stimuli with a flattened frequency response compared to both original and compressed stimuli, whereas there was a significant preference for the original (rising) frequency response for speech stimuli. Experiment 2 revealed no significant mean preference for the flattened frequency response, with 9 of 11 subjects preferring the rising frequency response. Input compression did not alter music enjoyment. Comparison of the two experiments indicated that individual frequency response preferences may depend on the genre or familiarity, and particularly whether the music contained lyrics.

Partial Granger causality--eliminating exogenous inputs and latent variables.

Science.gov (United States)

Guo, Shuixia; Seth, Anil K; Kendrick, Keith M; Zhou, Cong; Feng, Jianfeng

2008-07-15

Attempts to identify causal interactions in multivariable biological time series (e.g., gene data, protein data, physiological data) can be undermined by the confounding influence of environmental (exogenous) inputs. Compounding this problem, we are commonly only able to record a subset of all related variables in a system. These recorded variables are likely to be influenced by unrecorded (latent) variables. To address this problem, we introduce a novel variant of a widely used statistical measure of causality--Granger causality--that is inspired by the definition of partial correlation. Our 'partial Granger causality' measure is extensively tested with toy models, both linear and nonlinear, and is applied to experimental data: in vivo multielectrode array (MEA) local field potentials (LFPs) recorded from the inferotemporal cortex of sheep. Our results demonstrate that partial Granger causality can reveal the underlying interactions among elements in a network in the presence of exogenous inputs and latent variables in many cases where the existing conditional Granger causality fails.

Stochastic weather inputs for improved urban water demand forecasting: application of nonlinear input variable selection and machine learning methods

Science.gov (United States)

Quilty, J.; Adamowski, J. F.

2015-12-01

Urban water supply systems are often stressed during seasonal outdoor water use as water demands related to the climate are variable in nature making it difficult to optimize the operation of the water supply system. Urban water demand forecasts (UWD) failing to include meteorological conditions as inputs to the forecast model may produce poor forecasts as they cannot account for the increase/decrease in demand related to meteorological conditions. Meteorological records stochastically simulated into the future can be used as inputs to data-driven UWD forecasts generally resulting in improved forecast accuracy. This study aims to produce data-driven UWD forecasts for two different Canadian water utilities (Montreal and Victoria) using machine learning methods by first selecting historical UWD and meteorological records derived from a stochastic weather generator using nonlinear input variable selection. The nonlinear input variable selection methods considered in this work are derived from the concept of conditional mutual information, a nonlinear dependency measure based on (multivariate) probability density functions and accounts for relevancy, conditional relevancy, and redundancy from a potential set of input variables. The results of our study indicate that stochastic weather inputs can improve UWD forecast accuracy for the two sites considered in this work. Nonlinear input variable selection is suggested as a means to identify which meteorological conditions should be utilized in the forecast.

A probabilistic graphical model based stochastic input model construction

International Nuclear Information System (INIS)

Wan, Jiang; Zabaras, Nicholas

2014-01-01

Model reduction techniques have been widely used in modeling of high-dimensional stochastic input in uncertainty quantification tasks. However, the probabilistic modeling of random variables projected into reduced-order spaces presents a number of computational challenges. Due to the curse of dimensionality, the underlying dependence relationships between these random variables are difficult to capture. In this work, a probabilistic graphical model based approach is employed to learn the dependence by running a number of conditional independence tests using observation data. Thus a probabilistic model of the joint PDF is obtained and the PDF is factorized into a set of conditional distributions based on the dependence structure of the variables. The estimation of the joint PDF from data is then transformed to estimating conditional distributions under reduced dimensions. To improve the computational efficiency, a polynomial chaos expansion is further applied to represent the random field in terms of a set of standard random variables. This technique is combined with both linear and nonlinear model reduction methods. Numerical examples are presented to demonstrate the accuracy and efficiency of the probabilistic graphical model based stochastic input models. - Highlights: • Data-driven stochastic input models without the assumption of independence of the reduced random variables. • The problem is transformed to a Bayesian network structure learning problem. • Examples are given in flows in random media

Equating error in observed-score equating

NARCIS (Netherlands)

van der Linden, Willem J.

2006-01-01

Traditionally, error in equating observed scores on two versions of a test is defined as the difference between the transformations that equate the quantiles of their distributions in the sample and population of test takers. But it is argued that if the goal of equating is to adjust the scores of

Examining Unusual Digit Span Performance in a Population of Postsecondary Students Assessed for Academic Difficulties

Science.gov (United States)

Harrison, Allyson G.; Rosenblum, Yoni; Currie, Shannon

2010-01-01

Methods of identifying poor test-related motivation using the Wechsler Adult Intelligence Scale Digit Span subtest are based on identification of performance patterns that are implausible if the test taker is investing full effort. No studies to date, however, have examined the specificity of such measures, particularly when evaluating persons…

Quantifying input uncertainty in an assemble-to-order system simulation with correlated input variables of mixed types

NARCIS (Netherlands)

Akçay, A.E.; Biller, B.

2014-01-01

We consider an assemble-to-order production system where the product demands and the time since the last customer arrival are not independent. The simulation of this system requires a multivariate input model that generates random input vectors with correlated discrete and continuous components. In

76 FR 23992 - Meeting To Review and Solicit Input on Tests for Inclusion in the Project 25 Compliance...

Science.gov (United States)

2011-04-29

.../after time-out? Are repeater inbound and outbound packets ``paired'' and timing relationship between the... logistics information for the call. To be considered at the meeting, written comments and input on the...

On the Nature of the Input in Optimality Theory

DEFF Research Database (Denmark)

Heck, Fabian; Müller, Gereon; Vogel, Ralf

2002-01-01

The input has two main functions in optimality theory (Prince and Smolensky 1993). First, the input defines the candidate set, in other words it determines which output candidates compete for optimality, and which do not. Second, the input is referred to by faithfulness constraints that prohibit...... output candidates from deviating from specifications in the input. Whereas there is general agreement concerning the relevance of the input in phonology, the nature of the input in syntax is notoriously unclear. In this article, we show that the input should not be taken to define syntactic candidate...... and syntax is due to a basic, irreducible difference between these two components of grammar: Syntax is an information preserving system, phonology is not....

A knowledge-based theory of rising scores on "culture-free" tests.

Science.gov (United States)

Fox, Mark C; Mitchum, Ainsley L

2013-08-01

Secular gains in intelligence test scores have perplexed researchers since they were documented by Flynn (1984, 1987). Gains are most pronounced on abstract, so-called culture-free tests, prompting Flynn (2007) to attribute them to problem-solving skills availed by scientifically advanced cultures. We propose that recent-born individuals have adopted an approach to analogy that enables them to infer higher level relations requiring roles that are not intrinsic to the objects that constitute initial representations of items. This proposal is translated into item-specific predictions about differences between cohorts in pass rates and item-response patterns on the Raven's Matrices (Flynn, 1987), a seemingly culture-free test that registers the largest Flynn effect. Consistent with predictions, archival data reveal that individuals born around 1940 are less able to map objects at higher levels of relational abstraction than individuals born around 1990. Polytomous Rasch models verify predicted violations of measurement invariance, as raw scores are found to underestimate the number of analogical rules inferred by members of the earlier cohort relative to members of the later cohort who achieve the same overall score. The work provides a plausible cognitive account of the Flynn effect, furthers understanding of the cognition of matrix reasoning, and underscores the need to consider how test-takers select item responses. PsycINFO Database Record (c) 2013 APA, all rights reserved.

PageFocus: Using paradata to detect and prevent cheating on online achievement tests.

Science.gov (United States)

Diedenhofen, Birk; Musch, Jochen

2017-08-01

Cheating threatens the validity of unproctored online achievement tests. To address this problem, we developed PageFocus, a JavaScript that detects when participants abandon test pages by switching to another window or browser tab. In a first study, we aimed at testing whether PageFocus could detect and prevent cheating. We asked 115 lab and 186 online participants to complete a knowledge test comprising items that were difficult to answer but easy to look up on the Internet. Half of the participants were invited to look up the solutions, which significantly increased their test scores. The PageFocus script detected test takers who abandoned the test page with very high sensitivity and specificity, and successfully reduced cheating by generating a popup message that asked participants not to cheat. In a second study, 510 online participants completed a knowledge test comprising items that could easily be looked up and a reasoning task involving matrices that were impossible to look up. In a first group, a performance-related monetary reward was promised to the top scorers; in a second group, participants took part in a lottery that provided performance-unrelated rewards; and in a third group, no incentive was offered. PageFocus revealed that participants cheated more when performance-related incentives were offered. As expected, however, this effect was limited to items that could easily be looked up. We recommend that PageFocus be routinely employed to detect and prevent cheating on online achievement tests.

Phasing Out a Polluting Input

OpenAIRE

Eriksson, Clas

2015-01-01

This paper explores economic policies related to the potential conflict between economic growth and the environment. It applies a model with directed technological change and focuses on the case with low elasticity of substitution between clean and dirty inputs in production. New technology is substituted for the polluting input, which results in a gradual decline in pollution along the optimal long-run growth path. In contrast to some recent work, the era of pollution and environmental polic...

Effects of input uncertainty on cross-scale crop modeling

Science.gov (United States)

Waha, Katharina; Huth, Neil; Carberry, Peter

2014-05-01

The quality of data on climate, soils and agricultural management in the tropics is in general low or data is scarce leading to uncertainty in process-based modeling of cropping systems. Process-based crop models are common tools for simulating crop yields and crop production in climate change impact studies, studies on mitigation and adaptation options or food security studies. Crop modelers are concerned about input data accuracy as this, together with an adequate representation of plant physiology processes and choice of model parameters, are the key factors for a reliable simulation. For example, assuming an error in measurements of air temperature, radiation and precipitation of ± 0.2°C, ± 2 % and ± 3 % respectively, Fodor & Kovacs (2005) estimate that this translates into an uncertainty of 5-7 % in yield and biomass simulations. In our study we seek to answer the following questions: (1) are there important uncertainties in the spatial variability of simulated crop yields on the grid-cell level displayed on maps, (2) are there important uncertainties in the temporal variability of simulated crop yields on the aggregated, national level displayed in time-series, and (3) how does the accuracy of different soil, climate and management information influence the simulated crop yields in two crop models designed for use at different spatial scales? The study will help to determine whether more detailed information improves the simulations and to advise model users on the uncertainty related to input data. We analyse the performance of the point-scale crop model APSIM (Keating et al., 2003) and the global scale crop model LPJmL (Bondeau et al., 2007) with different climate information (monthly and daily) and soil conditions (global soil map and African soil map) under different agricultural management (uniform and variable sowing dates) for the low-input maize-growing areas in Burkina Faso/West Africa. We test the models' response to different levels of input

Input/Output linearizing control of a nuclear reactor

International Nuclear Information System (INIS)

Perez C, V.

1994-01-01

The feedback linearization technique is an approach to nonlinear control design. The basic idea is to transform, by means of algebraic methods, the dynamics of a nonlinear control system into a full or partial linear system. As a result of this linearization process, the well known basic linear control techniques can be used to obtain some desired dynamic characteristics. When full linearization is achieved, the method is referred to as input-state linearization, whereas when partial linearization is achieved, the method is referred to as input-output linearization. We will deal with the latter. By means of input-output linearization, the dynamics of a nonlinear system can be decomposed into an external part (input-output), and an internal part (unobservable). Since the external part consists of a linear relationship among the output of the plant and the auxiliary control input mentioned above, it is easy to design such an auxiliary control input so that we get the output to behave in a predetermined way. Since the internal dynamics of the system is known, we can check its dynamics behavior on order of to ensure that the internal states are bounded. The linearization method described here can be applied to systems with one-input/one-output, as well as to systems with multiple-inputs/multiple-outputs. Typical control problems such as stabilization and reference path tracking can be solved using this technique. In this work, the input/output linearization theory is presented, as well as the problem of getting the output variable to track some desired trayectories. Further, the design of an input/output control system applied to the nonlinear model of a research nuclear reactor is included, along with the results obtained by computer simulation. (Author)

FLUTAN input specifications

International Nuclear Information System (INIS)

Borgwaldt, H.; Baumann, W.; Willerding, G.

1991-05-01

FLUTAN is a highly vectorized computer code for 3-D fluiddynamic and thermal-hydraulic analyses in cartesian and cylinder coordinates. It is related to the family of COMMIX codes originally developed at Argonne National Laboratory, USA. To a large extent, FLUTAN relies on basic concepts and structures imported from COMMIX-1B and COMMIX-2 which were made available to KfK in the frame of cooperation contracts in the fast reactor safety field. While on the one hand not all features of the original COMMIX versions have been implemented in FLUTAN, the code on the other hand includes some essential innovative options like CRESOR solution algorithm, general 3-dimensional rebalacing scheme for solving the pressure equation, and LECUSSO-QUICK-FRAM techniques suitable for reducing 'numerical diffusion' in both the enthalphy and momentum equations. This report provides users with detailed input instructions, presents formulations of the various model options, and explains by means of comprehensive sample input, how to use the code. (orig.) [de

WORM: A general-purpose input deck specification language

International Nuclear Information System (INIS)

Jones, T.

1999-01-01

Using computer codes to perform criticality safety calculations has become common practice in the industry. The vast majority of these codes use simple text-based input decks to represent the geometry, materials, and other parameters that describe the problem. However, the data specified in input files are usually processed results themselves. For example, input decks tend to require the geometry specification in linear dimensions and materials in atom or weight fractions, while the parameter of interest might be mass or concentration. The calculations needed to convert from the item of interest to the required parameter in the input deck are usually performed separately and then incorporated into the input deck. This process of calculating, editing, and renaming files to perform a simple parameter study is tedious at best. In addition, most computer codes require dimensions to be specified in centimeters, while drawings or other materials used to create the input decks might be in other units. This also requires additional calculation or conversion prior to composition of the input deck. These additional calculations, while extremely simple, introduce a source for error in both the calculations and transcriptions. To overcome these difficulties, WORM (Write One, Run Many) was created. It is an easy-to-use programming language to describe input decks and can be used with any computer code that uses standard text files for input. WORM is available, via the Internet, at worm.lanl.gov. A user's guide, tutorials, example models, and other WORM-related materials are also available at this Web site. Questions regarding WORM should be directed to wormatlanl.gov

A Novel Biometric Identification Based on a User's Input Pattern Analysis for Intelligent Mobile Devices

Directory of Open Access Journals (Sweden)

Hojin Seo

2012-07-01

Full Text Available As intelligent mobile devices become more popular, security threats targeting them are increasing. The resource constraints of mobile devices, such as battery life and computing power, however, make it harder to handle such threats effectively. The existing physical and behavioural biometric identification methods - looked upon as good alternatives - are unsuitable for the current mobile environment. This paper proposes a specially designed biometric identification method for intelligent mobile devices by analysing the user's input patterns, such as a finger's touch duration, pressure level and the touching width of the finger on the touch screen. We collected the input pattern data of individuals to empirically test our method. Our testing results show that this method effectively identifies users with near a 100% rate of accuracy.

A Glove for Tapping and Discrete 1D/2D Input

Science.gov (United States)

Miller, Sam A.; Smith, Andy; Bahram, Sina; SaintAmant, Robert

2012-01-01

This paper describes a glove with which users enter input by tapping fingertips with the thumb or by rubbing the thumb over the palmar surfaces of the middle and index fingers. The glove has been informally tested as the controller for two semi-autonomous robots in a a 3D simulation environment. A preliminary evaluation of the glove s performance is presented.

Energy-positive sewage sludge pre-treatment with a novel ultrasonic flatbed reactor at low energy input.

Science.gov (United States)

Lippert, Thomas; Bandelin, Jochen; Musch, Alexandra; Drewes, Jörg E; Koch, Konrad

2018-05-20

The performance of a novel ultrasonic flatbed reactor for sewage sludge pre-treatment was assessed for three different waste activated sludges. The study systematically investigated the impact of specific energy input (200 - 3,000 kJ/kg TS ) on the degree of disintegration (DD COD , i.e. ratio between ultrasonically and maximum chemically solubilized COD) and methane production enhancement. Relationship between DD COD and energy input was linear, for all sludges tested. Methane yields were significantly increased for both low (200 kJ/kg TS ) and high (2,000 - 3,000 kJ/kg TS ) energy inputs, while intermediate inputs (400 - 1,000 kJ/kg TS ) showed no significant improvement. High inputs additionally accelerated reaction kinetics, but were limited to similar gains as low inputs (max. 12%), despite the considerably higher DD COD values. Energy balance was only positive for 200 kJ/kg TS -treatments, with a maximum energy recovery of 122%. Results suggest that floc deagglomeration rather than cell lysis (DD COD =1% - 5% at 200 kJ/kg TS ) is the key principle of energy-positive sludge sonication. Copyright © 2018 Elsevier Ltd. All rights reserved.

Application of a Linear Input/Output Model to Tankless Water Heaters

Energy Technology Data Exchange (ETDEWEB)

Butcher T.; Schoenbauer, B.

2011-12-31

In this study, the applicability of a linear input/output model to gas-fired, tankless water heaters has been evaluated. This simple model assumes that the relationship between input and output, averaged over both active draw and idle periods, is linear. This approach is being applied to boilers in other studies and offers the potential to make a small number of simple measurements to obtain the model parameters. These parameters can then be used to predict performance under complex load patterns. Both condensing and non-condensing water heaters have been tested under a very wide range of load conditions. It is shown that this approach can be used to reproduce performance metrics, such as the energy factor, and can be used to evaluate the impacts of alternative draw patterns and conditions.

Super-Efficiency and Sensitivity Analysis Based on Input-Oriented DEA-R

Directory of Open Access Journals (Sweden)

M. R. Mozaffari∗

2012-03-01

Full Text Available This paper suggests a method of finding super-efficiency scores and modification of input-oriented models for sensitivity analysis of decision making units. First, by using DEA-R (ratiobased DEA models in the input orientation, the models of superefficiency and also models of super-efficiency modification are suggested. Second, the worst-case scenarios are considered where the efficiency of the test DMU is deteriorating while the efficiencies of the other DMUs are improving. Then, by combining these two ideas, a model is suggested which increases the super-efficiency score and modifies the change ranges in order to preserve the performance class. In the end, the super-efficiency and change interval of efficient decision making units for 23 branches of Zone 1 of the Islamic Azad University are calculated

Identification of genotypic variation for nitrogen response in potato (Solanum tuberosum) under low nitrogen input circumstances

OpenAIRE

Tiemens-Hulscher, M.; Lammerts Van Bueren, E.; Struik, P.C.

2009-01-01

Nitrogen is an essential nutrient for crop growth. The demand for nitrogen in the potato crop is relatively high. However, in organic farming nitrogen input is rather limited, compared with conventional farming. In this research nine potato varieties were tested at three nitrogen levels. Genotypic variation for yield, leaf area index, period of maximum soil cover, sensitivity for N-shortage and nitrogen efficiency under low input circumstances was found. However, in these experiments varietie...

7 CFR 3431.4 - Solicitation of stakeholder input.

Science.gov (United States)

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Solicitation of stakeholder input. 3431.4 Section... Designation of Veterinarian Shortage Situations § 3431.4 Solicitation of stakeholder input. The Secretary will solicit stakeholder input on the process and procedures used to designate veterinarian shortage situations...

Modeling Input Errors to Improve Uncertainty Estimates for Sediment Transport Model Predictions

Science.gov (United States)

Jung, J. Y.; Niemann, J. D.; Greimann, B. P.

2016-12-01

Bayesian methods using Markov chain Monte Carlo algorithms have recently been applied to sediment transport models to assess the uncertainty in the model predictions due to the parameter values. Unfortunately, the existing approaches can only attribute overall uncertainty to the parameters. This limitation is critical because no model can produce accurate forecasts if forced with inaccurate input data, even if the model is well founded in physical theory. In this research, an existing Bayesian method is modified to consider the potential errors in input data during the uncertainty evaluation process. The input error is modeled using Gaussian distributions, and the means and standard deviations are treated as uncertain parameters. The proposed approach is tested by coupling it to the Sedimentation and River Hydraulics - One Dimension (SRH-1D) model and simulating a 23-km reach of the Tachia River in Taiwan. The Wu equation in SRH-1D is used for computing the transport capacity for a bed material load of non-cohesive material. Three types of input data are considered uncertain: (1) the input flowrate at the upstream boundary, (2) the water surface elevation at the downstream boundary, and (3) the water surface elevation at a hydraulic structure in the middle of the reach. The benefits of modeling the input errors in the uncertainty analysis are evaluated by comparing the accuracy of the most likely forecast and the coverage of the observed data by the credible intervals to those of the existing method. The results indicate that the internal boundary condition has the largest uncertainty among those considered. Overall, the uncertainty estimates from the new method are notably different from those of the existing method for both the calibration and forecast periods.

Records of contaminant input to San Francisco Bay

International Nuclear Information System (INIS)

Geen, A. van; Luoma, S.N.; Hornberger, M.; Fuller, C.; Pereira, W.; Hostettler, F.; Kvenvolden, K.; Anima, R.; Ritson, P.; Flegal, A.R.

1994-01-01

San Francisco Bay, one of the few large estuaries on the West Coast of North America, was subjected to great change as mining, agriculture, industrialization and urbanization accelerated after 1849, and river flows were diverted for agriculture. Trends in contamination were evident in sediment cores analyzed from seven sites. Sedimentation rates increased with human activities. Industrialization was a greater source of contamination than mining. Nearest the mouth of the estuary, concentrations of Hg, Cu, Zn, Pb and PAH began to increase around 1900. Isotopes of Pb indicated sediments were affected by a mixture of atmospheric, industrial and erosional inputs. Peaks in some contaminants were evident since the 1950s, notably Ag, Cd in water (as recorded in foraminifers tests), and DDT. Chromium and vanadium were naturally enriched throughout the cores. Declines in metal concentrations in surface sediments were not evident. Vertical mixing could delay response of sediments to changed metal inputs. Nearer the head of the estuary, contaminant concentrations, TOC and indicators of terrigenous carbon increased sharply where 137 Cs and 239,240 Pu was present (presumably post-1950). Diversion of river flows may have affected accumulation of sediments contaminated by post-war industrialization and acceleration of agricultural development

The impact of note taking style and note availability at retrieval on mock jurors' recall and recognition of trial information.

Science.gov (United States)

Thorley, Craig; Baxter, Rebecca E; Lorek, Joanna

2016-01-01

Jurors forget critical trial information and what they do recall can be inaccurate. Jurors' recall of trial information can be enhanced by permitting them to take notes during a trial onto blank sheets of paper (henceforth called freestyle note taking). A recent innovation is the trial-ordered-notebook (TON) for jurors, which is a notebook containing headings outlining the trial proceedings and which has space beneath each heading for notes. In a direct comparison, TON note takers recalled more trial information than freestyle note takers. This study investigated whether or not note taking improves recall as a result of enhanced encoding or as a result of note access at retrieval. To assess this, mock jurors watched and freely recalled a trial video with one-fifth taking no notes, two-fifths taking freestyle notes and two-fifths using TONs. During retrieval, half of the freestyle and TON note takers could access their notes. Note taking enhanced recall, with the freestyle note takers and TON note takers without note access performing equally as well. Note taking therefore enhances encoding. Recall was greatest for the TON note takers with note access, suggesting a retrieval enhancement unique to this condition. The theoretical and applied implications of these findings are discussed.

Uncertainty of input data for room acoustic simulations

DEFF Research Database (Denmark)

Jeong, Cheol-Ho; Marbjerg, Gerd; Brunskog, Jonas

2016-01-01

Although many room acoustic simulation models have been well established, simulation results will never be accurate with inaccurate and uncertain input data. This study addresses inappropriateness and uncertainty of input data for room acoustic simulations. Firstly, the random incidence absorption...... and scattering coefficients are insufficient when simulating highly non-diffuse rooms. More detailed information, such as the phase and angle dependence, can greatly improve the simulation results of pressure-based geometrical and wave-based models at frequencies well below the Schroeder frequency. Phase...... summarizes potential advanced absorption measurement techniques that can improve the quality of input data for room acoustic simulations. Lastly, plenty of uncertain input data are copied from unreliable sources. Software developers and users should be careful when spreading such uncertain input data. More...

Energy and the non-energy inputs substitution: evidence for Italy, Portugal and Spain

International Nuclear Information System (INIS)

Medina, J.; Vega-Cervera, J.A.

2001-01-01

The factor demand is modeled for Italy, Portugal and Spain. We estimated a translog cost function with capital, labor and energy over the 1980-1996 period. Our objective regarding energy as input was two-fold: on the one hand, to verify its incorporation as a productive factor, and, on the other, to observe its degree of substitutability with the other classical factors, given the high level of energy dependency of these countries. Using a separability test and confidence intervals for the Allen and price elasticities, our estimates confirmed both the nonseparability of the energy input and the existence of consistent substitution between energy and labor only for Italy. (author)

Metallurgy and mechanical properties variation with heat input,during dissimilar metal welding between stainless and carbon steel

Science.gov (United States)

Ramdan, RD; Koswara, AL; Surasno; Wirawan, R.; Faturohman, F.; Widyanto, B.; Suratman, R.

2018-02-01

The present research focus on the metallurgy and mechanical aspect of dissimilar metal welding.One of the common parameters that significantly contribute to the metallurgical aspect on the metal during welding is heat input. Regarding this point, in the present research, voltage, current and the welding speed has been varied in order to observe the effect of heat input on the metallurgical and mechanical aspect of both welded metals. Welding was conducted by Gas Metal Arc Welding (GMAW) on stainless and carbon steel with filler metal of ER 309. After welding, hardness test (micro-Vickers), tensile test, macro and micro-structure characterization and Energy Dispersive Spectroscopy (EDS) characterization were performed. It was observed no brittle martensite observed at HAZ of carbon steel, whereas sensitization was observed at the HAZ of stainless steel for all heat input variation at the present research. Generally, both HAZ at carbon steel and stainless steel did not affect tensile test result, however the formation of chromium carbide at the grain boundary of HAZ structure (sensitization) of stainless steel, indicate that better process and control of welding is required for dissimilar metal welding, especially to overcome this issue.

Demonstration of a High-Order Mode Input Coupler for a 220-GHz Confocal Gyrotron Traveling Wave Tube

Science.gov (United States)

Guan, Xiaotong; Fu, Wenjie; Yan, Yang

2018-02-01

A design of high-order mode input coupler for 220-GHz confocal gyrotron travelling wave tube is proposed, simulated, and demonstrated by experimental tests. This input coupler is designed to excite confocal TE 06 mode from rectangle waveguide TE 10 mode over a broadband frequency range. Simulation results predict that the optimized conversion loss is about 2.72 dB with a mode purity excess of 99%. Considering of the gyrotron interaction theory, an effective bandwidth of 5 GHz is obtained, in which the beam-wave coupling efficiency is higher than half of maximum. The field pattern under low power demonstrates that TE 06 mode is successfully excited in confocal waveguide at 220 GHz. Cold test results from the vector network analyzer perform good agreements with simulation results. Both simulation and experimental results illustrate that the reflection at input port S11 is sensitive to the perpendicular separation of two mirrors. It provides an engineering possibility for estimating the assembly precision.

A guidance on MELCOR input preparation : An input deck for Ul-Chin 3 and 4 Nuclear Power Plant

Energy Technology Data Exchange (ETDEWEB)

Cho, Song Won

1997-02-01

The objective of this study is to enhance the capability of assessing the severe accident sequence analyses and the containment behavior using MELCOR computer code and to provide the guideline of its efficient use. This report shows the method of the input deck preparation as well as the assessment strategy for the MELCOR code. MELCOR code is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. The code is being developed at Sandia National Laboratories for the U.S. NRC as a second generation plant risk assessment tool and the successor to the source term code package. The accident sequence of the reference input deck prepared in this study for Ulchin unit 3 and 4 nuclear power plants, is the total loss of feedwater (TLOFW) without any success of safety systems, which is similar to station blackout (TLMB). It is very useful to simulate a well-known sequence through the best estimated code or experiment, because the results of the simulation before core melt can be compared with the FSAR, but no data is available after core melt. The precalculation for the TLOFW using the reference input deck is performed successfully as expected. The other sequences will be carried out with minor changes in the reference input. This input deck will be improved continually by the adding of the safety systems not included in this input deck, and also through the sensitivity and uncertainty analyses. (author). 19 refs., 10 tabs., 55 figs.

A guidance on MELCOR input preparation : An input deck for Ul-Chin 3 and 4 Nuclear Power Plant

International Nuclear Information System (INIS)

Cho, Song Won.

1997-02-01

The objective of this study is to enhance the capability of assessing the severe accident sequence analyses and the containment behavior using MELCOR computer code and to provide the guideline of its efficient use. This report shows the method of the input deck preparation as well as the assessment strategy for the MELCOR code. MELCOR code is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. The code is being developed at Sandia National Laboratories for the U.S. NRC as a second generation plant risk assessment tool and the successor to the source term code package. The accident sequence of the reference input deck prepared in this study for Ulchin unit 3 and 4 nuclear power plants, is the total loss of feedwater (TLOFW) without any success of safety systems, which is similar to station blackout (TLMB). It is very useful to simulate a well-known sequence through the best estimated code or experiment, because the results of the simulation before core melt can be compared with the FSAR, but no data is available after core melt. The precalculation for the TLOFW using the reference input deck is performed successfully as expected. The other sequences will be carried out with minor changes in the reference input. This input deck will be improved continually by the adding of the safety systems not included in this input deck, and also through the sensitivity and uncertainty analyses. (author). 19 refs., 10 tabs., 55 figs

High-Voltage-Input Level Translator Using Standard CMOS

Science.gov (United States)

Yager, Jeremy A.; Mojarradi, Mohammad M.; Vo, Tuan A.; Blalock, Benjamin J.

2011-01-01

proposed integrated circuit would translate (1) a pair of input signals having a low differential potential and a possibly high common-mode potential into (2) a pair of output signals having the same low differential potential and a low common-mode potential. As used here, "low" and "high" refer to potentials that are, respectively, below or above the nominal supply potential (3.3 V) at which standard complementary metal oxide/semiconductor (CMOS) integrated circuits are designed to operate. The input common-mode potential could lie between 0 and 10 V; the output common-mode potential would be 2 V. This translation would make it possible to process the pair of signals by use of standard 3.3-V CMOS analog and/or mixed-signal (analog and digital) circuitry on the same integrated-circuit chip. A schematic of the circuit is shown in the figure. Standard 3.3-V CMOS circuitry cannot withstand input potentials greater than about 4 V. However, there are many applications that involve low-differential-potential, high-common-mode-potential input signal pairs and in which standard 3.3-V CMOS circuitry, which is relatively inexpensive, would be the most appropriate circuitry for performing other functions on the integrated-circuit chip that handles the high-potential input signals. Thus, there is a need to combine high-voltage input circuitry with standard low-voltage CMOS circuitry on the same integrated-circuit chip. The proposed circuit would satisfy this need. In the proposed circuit, the input signals would be coupled into both a level-shifting pair and a common-mode-sensing pair of CMOS transistors. The output of the level-shifting pair would be fed as input to a differential pair of transistors. The resulting differential current output would pass through six standoff transistors to be mirrored into an output branch by four heterojunction bipolar transistors. The mirrored differential current would be converted back to potential by a pair of diode-connected transistors

Integrated circuit test-port architecture and method and apparatus of test-port generation

Science.gov (United States)

Teifel, John

2016-04-12

A method and apparatus are provided for generating RTL code for a test-port interface of an integrated circuit. In an embodiment, a test-port table is provided as input data. A computer automatically parses the test-port table into data structures and analyzes it to determine input, output, local, and output-enable port names. The computer generates address-detect and test-enable logic constructed from combinational functions. The computer generates one-hot multiplexer logic for at least some of the output ports. The one-hot multiplexer logic for each port is generated so as to enable the port to toggle between data signals and test signals. The computer then completes the generation of the RTL code.

Input Mezzanine Card for the Fast Tracker at ATLAS

CERN Document Server

Iizawa, Tomoya; The ATLAS collaboration

2016-01-01

The Fast Tracker (FTK) is an integral part of trigger upgrade program for the ATLAS experiment. At LHC Run 2, which started operations in June 2015 at a center-of-mass energy of 13 TeV, the luminosity could reach up to 2*1034 cm-2s-1 and an average of 40-50 simultaneous proton collisions per beam crossing will be expected. The higher luminosity demands a more sophisticated trigger system with increased use of tracking information. The Fast Tracker is a highly-parallel hardware system that rapidly finds and reconstructs tracks in the ATLAS inner-detector at the triggering stage. This paper focuses on the FTK Input Mezzanine Board that is input module of entire system. The functions of this board are to receive the insertable b-layer, pixel and micro-strip data from the ATLAS Silicon read-out drivers, perform clustering, and forward the data to its mother board. Mass production and quality control tests of Mezzanine Boards were completed, and staged installation and commissioning are ongoing. Details of its fun...

Consequences of Violated Equating Assumptions under the Equivalent Groups Design

Science.gov (United States)

Lyren, Per-Erik; Hambleton, Ronald K.

2011-01-01

The equal ability distribution assumption associated with the equivalent groups equating design was investigated in the context of a selection test for admission to higher education. The purpose was to assess the consequences for the test-takers in terms of receiving improperly high or low scores compared to their peers, and to find strong…

Measuring Motivation in Low-Stakes Assessments. Research Report. ETS RR-15-19

Science.gov (United States)

Finn, Bridgid

2015-01-01

There is a growing concern that when scores from low-stakes assessments are reported without considering student motivation as a construct of interest, biased conclusions about how much students know will result. Low motivation is a problem particularly relevant to low-stakes testing scenarios, which may be low stakes for the test taker but have…

An open tool for input function estimation and quantification of dynamic PET FDG brain scans.

Science.gov (United States)

Bertrán, Martín; Martínez, Natalia; Carbajal, Guillermo; Fernández, Alicia; Gómez, Álvaro

2016-08-01

Positron emission tomography (PET) analysis of clinical studies is mostly restricted to qualitative evaluation. Quantitative analysis of PET studies is highly desirable to be able to compute an objective measurement of the process of interest in order to evaluate treatment response and/or compare patient data. But implementation of quantitative analysis generally requires the determination of the input function: the arterial blood or plasma activity which indicates how much tracer is available for uptake in the brain. The purpose of our work was to share with the community an open software tool that can assist in the estimation of this input function, and the derivation of a quantitative map from the dynamic PET study. Arterial blood sampling during the PET study is the gold standard method to get the input function, but is uncomfortable and risky for the patient so it is rarely used in routine studies. To overcome the lack of a direct input function, different alternatives have been devised and are available in the literature. These alternatives derive the input function from the PET image itself (image-derived input function) or from data gathered from previous similar studies (population-based input function). In this article, we present ongoing work that includes the development of a software tool that integrates several methods with novel strategies for the segmentation of blood pools and parameter estimation. The tool is available as an extension to the 3D Slicer software. Tests on phantoms were conducted in order to validate the implemented methods. We evaluated the segmentation algorithms over a range of acquisition conditions and vasculature size. Input function estimation algorithms were evaluated against ground truth of the phantoms, as well as on their impact over the final quantification map. End-to-end use of the tool yields quantification maps with [Formula: see text] relative error in the estimated influx versus ground truth on phantoms. The main

Repositioning Recitation Input in College English Teaching

Science.gov (United States)

Xu, Qing

2009-01-01

This paper tries to discuss how recitation input helps overcome the negative influences on the basis of second language acquisition theory and confirms the important role that recitation input plays in improving college students' oral and written English.

IM-135-648-00 IDIM tester instruction manual for the TESTER for (135 to 562) Isolated Digital Input Module for SLC

International Nuclear Information System (INIS)

Kieffer, J.

1983-01-01

This unit is designed to provide all of the input levels and channels needed to perform complete production and maintenance testing of the SLC Isolated Digital Input Module (SLAC 135 to 562). The manual includes the following sections: specifications; front panel, lights and connectors; reference list; functional description; 82S100 logic equations; test and checkout procedures; appendix A, SLAC 82S100 programming data; and appendix B, JXK-FORTH 135 to 648 program listing

Active fault tolerance control of a wind turbine system using an unknown input observer with an actuator fault

Directory of Open Access Journals (Sweden)

Li Shanzhi

2018-03-01

Full Text Available This paper proposes a fault tolerant control scheme based on an unknown input observer for a wind turbine system subject to an actuator fault and disturbance. Firstly, an unknown input observer for state estimation and fault detection using a linear parameter varying model is developed. By solving linear matrix inequalities (LMIs and linear matrix equalities (LMEs, the gains of the unknown input observer are obtained. The convergence of the unknown input observer is also analysed with Lyapunov theory. Secondly, using fault estimation, an active fault tolerant controller is applied to a wind turbine system. Finally, a simulation of a wind turbine benchmark with an actuator fault is tested for the proposed method. The simulation results indicate that the proposed FTC scheme is efficient.

Authentic Language Input Through Audiovisual Technology and Second Language Acquisition

Directory of Open Access Journals (Sweden)

Taher Bahrani

2014-09-01

Full Text Available Second language acquisition cannot take place without having exposure to language input. With regard to this, the present research aimed at providing empirical evidence about the low and the upper-intermediate language learners’ preferred type of audiovisual programs and language proficiency development outside the classroom. To this end, 60 language learners (30 low level and 30 upper-intermediate level were asked to have exposure to their preferred types of audiovisual program(s outside the classroom and keep a diary of the amount and the type of exposure. The obtained data indicated that the low-level participants preferred cartoons and the upper-intermediate participants preferred news more. To find out which language proficiency level could improve its language proficiency significantly, a post-test was administered. The results indicated that only the upper-intermediate language learners gained significant improvement. Based on the findings, the quality of the language input should be given priority over the amount of exposure.

Effects of aging treatment and heat input on the microstructures and mechanical properties of TIG-welded 6061-T6 alloy joints

Science.gov (United States)

Peng, Dong; Shen, Jun; Tang, Qin; Wu, Cui-ping; Zhou, Yan-bing

2013-03-01

Aging treatment and various heat input conditions were adopted to investigate the microstructural evolution and mechanical properties of TIG welded 6061-T6 alloy joints by microstructural observations, microhardness tests, and tensile tests. With an increase in heat input, the width of the heat-affected zone (HAZ) increases and grains in the fusion zone (FZ) coarsen. Moreover, the hardness of the HAZ decreases, whereas that of the FZ decreases initially and then increases with an increase in heat input. Low heat input results in the low ultimate tensile strength of the welded joints due to the presence of partial penetrations and pores in the welded joints. After a simple artificial aging treatment at 175°C for 8 h, the microstructure of the welded joints changes slightly. The mechanical properties of the welded joints enhance significantly after the aging process as few precipitates distribute in the welded seam.

Remote media vision-based computer input device

Science.gov (United States)

Arabnia, Hamid R.; Chen, Ching-Yi

1991-11-01

In this paper, we introduce a vision-based computer input device which has been built at the University of Georgia. The user of this system gives commands to the computer without touching any physical device. The system receives input through a CCD camera; it is PC- based and is built on top of the DOS operating system. The major components of the input device are: a monitor, an image capturing board, a CCD camera, and some software (developed by use). These are interfaced with a standard PC running under the DOS operating system.

The Comparative Effects of Comprehensible Input, Output and Corrective Feedback on the Receptive Acquisition of L2 Vocabulary Items

Directory of Open Access Journals (Sweden)

Mohammad Nowbakht

2015-08-01

Full Text Available In the present study, the comparative effects of comprehensible input, output and corrective feedback on the receptive acquisition of L2 vocabulary items were investigated. Two groups of beginning EFL learners participated in the study. The control group received comprehensible input only, while the experimental group received input and was required to produce written output. They also received corrective feedback on their lexical errors if any. This could result in the production of modified output. The results of the study indicated that (a the group which produced output and received feedback (if necessary outperformed the group which only received input in the post-test, (b within the experimental group, feedback played a greater role in learners’ better performance than output, (c also a positive correlation between the amount of feedback an individual learner received, and his overall performance in the post-test; and also between the amount of feedback given for a specific word and the correct responses given to its related item in the post-test was found.  The findings of this study provide evidence for the role of output production along with receiving corrective feedback in enhancing L2 processing by drawing further L2 learners’ attention to their output which in turn may result in improving their receptive acquisition of L2 words. Furthermore, as the results suggested, feedback made a more contribution to L2 development than output. Keywords: comprehensible input, output, interaction, corrective feedback, modified output, receptive vocabulary acquisition

Automated model-based testing of hybrid systems

NARCIS (Netherlands)

Osch, van M.P.W.J.

2009-01-01

In automated model-based input-output conformance testing, tests are automati- cally generated from a speci¯cation and automatically executed on an implemen- tation. Input is applied to the implementation and output is observed from the implementation. If the observed output is allowed according to

Response sensitivity of barrel neuron subpopulations to simulated thalamic input.

Science.gov (United States)

Pesavento, Michael J; Rittenhouse, Cynthia D; Pinto, David J

2010-06-01

Our goal is to examine the relationship between neuron- and network-level processing in the context of a well-studied cortical function, the processing of thalamic input by whisker-barrel circuits in rodent neocortex. Here we focus on neuron-level processing and investigate the responses of excitatory and inhibitory barrel neurons to simulated thalamic inputs applied using the dynamic clamp method in brain slices. Simulated inputs are modeled after real thalamic inputs recorded in vivo in response to brief whisker deflections. Our results suggest that inhibitory neurons require more input to reach firing threshold, but then fire earlier, with less variability, and respond to a broader range of inputs than do excitatory neurons. Differences in the responses of barrel neuron subtypes depend on their intrinsic membrane properties. Neurons with a low input resistance require more input to reach threshold but then fire earlier than neurons with a higher input resistance, regardless of the neuron's classification. Our results also suggest that the response properties of excitatory versus inhibitory barrel neurons are consistent with the response sensitivities of the ensemble barrel network. The short response latency of inhibitory neurons may serve to suppress ensemble barrel responses to asynchronous thalamic input. Correspondingly, whereas neurons acting as part of the barrel circuit in vivo are highly selective for temporally correlated thalamic input, excitatory barrel neurons acting alone in vitro are less so. These data suggest that network-level processing of thalamic input in barrel cortex depends on neuron-level processing of the same input by excitatory and inhibitory barrel neurons.

Development of an Input Model to MELCOR 1.8.5 for the Ringhals 3 PWR

International Nuclear Information System (INIS)

Nilsson, Lars

2004-12-01

An input file to the severe accident code MELCOR 1.8.5 has been developed for the Swedish pressurized water reactor Ringhals 3. The aim was to produce a file that can be used for calculations of various postulated severe accident scenarios, although the first application is specifically on cases involving large hydrogen production. The input file is rather detailed with individual modelling of all three cooling loops. The report describes the basis for the Ringhals 3 model and the input preparation step by step and is illustrated by nodalization schemes of the different plant systems. Present version of the report is restricted to the fundamental MELCOR input preparation, and therefore most of the figures of Ringhals 3 measurements and operating parameters are excluded here. These are given in another, complete version of the report, for limited distribution, which includes tables for pertinent data of all components. That version contains appendices with a complete listing of the input files as well as tables of data compiled from a RELAP5 file, that was a major basis for the MELCOR input for the cooling loops. The input was tested in steady-state calculations in order to simulate the initial conditions at current nominal operating conditions in Ringhals 3 for 2775 MW thermal power. The results of the steady-state calculations are presented in the report. Calculations with the MELCOR model will then be carried out of certain accident sequences for comparison with results from earlier MAAP4 calculations. That work will be reported separately

Reconstruction of an input function from a dynamic PET water image using multiple tissue curves

Science.gov (United States)

Kudomi, Nobuyuki; Maeda, Yukito; Yamamoto, Yuka; Nishiyama, Yoshihiro

2016-08-01

Quantification of cerebral blood flow (CBF) is important for the understanding of normal and pathologic brain physiology. When CBF is assessed using PET with {{\\text{H}}2} 15O or C15O2, its calculation requires an arterial input function, which generally requires invasive arterial blood sampling. The aim of the present study was to develop a new technique to reconstruct an image derived input function (IDIF) from a dynamic {{\\text{H}}2} 15O PET image as a completely non-invasive approach. Our technique consisted of using a formula to express the input using tissue curve with rate constant parameter. For multiple tissue curves extracted from the dynamic image, the rate constants were estimated so as to minimize the sum of the differences of the reproduced inputs expressed by the extracted tissue curves. The estimated rates were used to express the inputs and the mean of the estimated inputs was used as an IDIF. The method was tested in human subjects (n  =  29) and was compared to the blood sampling method. Simulation studies were performed to examine the magnitude of potential biases in CBF and to optimize the number of multiple tissue curves used for the input reconstruction. In the PET study, the estimated IDIFs were well reproduced against the measured ones. The difference between the calculated CBF values obtained using the two methods was small as around  PET imaging. This suggests the possibility of using a completely non-invasive technique to assess CBF in patho-physiological studies.

Input Subject Diversity Enhances Early Grammatical Growth: Evidence from a Parent-Implemented Intervention

Science.gov (United States)

Hadley, Pamela A.; Rispoli, Matthew; Holt, Janet K.; Papastratakos, Theodora; Hsu, Ning; Kubalanza, Mary; McKenna, Megan M.

2017-01-01

Purpose: The current study used an intervention design to test the hypothesis that parent input sentences with diverse lexical noun phrase (NP) subjects would accelerate growth in children's sentence diversity. Method: Child growth in third person sentence diversity was modeled from 21-30 months (n = 38) in conversational language samples obtained…

Input and Age-Dependent Variation in Second Language Learning: A Connectionist Account.

Science.gov (United States)

Janciauskas, Marius; Chang, Franklin

2017-07-26

Language learning requires linguistic input, but several studies have found that knowledge of second language (L2) rules does not seem to improve with more language exposure (e.g., Johnson & Newport, 1989). One reason for this is that previous studies did not factor out variation due to the different rules tested. To examine this issue, we reanalyzed grammaticality judgment scores in Flege, Yeni-Komshian, and Liu's (1999) study of L2 learners using rule-related predictors and found that, in addition to the overall drop in performance due to a sensitive period, L2 knowledge increased with years of input. Knowledge of different grammar rules was negatively associated with input frequency of those rules. To better understand these effects, we modeled the results using a connectionist model that was trained using Korean as a first language (L1) and then English as an L2. To explain the sensitive period in L2 learning, the model's learning rate was reduced in an age-related manner. By assigning different learning rates for syntax and lexical learning, we were able to model the difference between early and late L2 learners in input sensitivity. The model's learning mechanism allowed transfer between the L1 and L2, and this helped to explain the differences between different rules in the grammaticality judgment task. This work demonstrates that an L1 model of learning and processing can be adapted to provide an explicit account of how the input and the sensitive period interact in L2 learning. © 2017 The Authors. Cognitive Science - A Multidisciplinary Journal published by Wiley Periodicals, Inc.

How model and input uncertainty impact maize yield simulations in West Africa

Science.gov (United States)

Waha, Katharina; Huth, Neil; Carberry, Peter; Wang, Enli

2015-02-01

Crop models are common tools for simulating crop yields and crop production in studies on food security and global change. Various uncertainties however exist, not only in the model design and model parameters, but also and maybe even more important in soil, climate and management input data. We analyze the performance of the point-scale crop model APSIM and the global scale crop model LPJmL with different climate and soil conditions under different agricultural management in the low-input maize-growing areas of Burkina Faso, West Africa. We test the models’ response to different levels of input information from little to detailed information on soil, climate (1961-2000) and agricultural management and compare the models’ ability to represent the observed spatial (between locations) and temporal variability (between years) in crop yields. We found that the resolution of different soil, climate and management information influences the simulated crop yields in both models. However, the difference between models is larger than between input data and larger between simulations with different climate and management information than between simulations with different soil information. The observed spatial variability can be represented well from both models even with little information on soils and management but APSIM simulates a higher variation between single locations than LPJmL. The agreement of simulated and observed temporal variability is lower due to non-climatic factors e.g. investment in agricultural research and development between 1987 and 1991 in Burkina Faso which resulted in a doubling of maize yields. The findings of our study highlight the importance of scale and model choice and show that the most detailed input data does not necessarily improve model performance.

Certification Testing Methodology for Composite Structure. Volume 2. Methodology Development

Science.gov (United States)

1986-10-01

parameter, sample size and fa- tigue test duration. The required input are 1. Residual strength Weibull shape parameter ( ALPR ) 2. Fatigue life Weibull shape...INPUT STRENGTH ALPHA’) READ(*,*) ALPR ALPRI = 1.O/ ALPR WRITE(*, 2) 2 FORMAT( 2X, ’PLEASE INPUT LIFE ALPHA’) READ(*,*) ALPL ALPLI - 1.0/ALPL WRITE(*, 3...3 FORMAT(2X,’PLEASE INPUT SAMPLE SIZE’) READ(*,*) N AN - N WRITE(*,4) 4 FORMAT(2X,’PLEASE INPUT TEST DURATION’) READ(*,*) T RALP - ALPL/ ALPR ARGR - 1

MARS input data for steady-state calculation of ATLAS

International Nuclear Information System (INIS)

Park, Hyun Sik; Euh, D. J.; Choi, K. Y.; Kwon, T. S.; Jeong, J. J.; Baek, W. P.

2004-12-01

An integral effect test loop for Pressurized Water Reactors (PWRs), the ATLAS (Advanced Thermal-hydraulic Test Loop for Accident Simulation), is under construction by Thermal-Hydraulics Safety Research Division in Korea Atomic Energy Research Institute (KAERI). This report includes calculation sheets of the input for the best-estimate system analysis code, the MARS code, based on the ongoing design features of ATLAS. The ATLAS facility has been designed to have the length scale of 1/2 and area scale of 1/144 compared with the reference plant, APR1400. The contents of this report are divided into three parts: (1) core and reactor vessel, (2) steam generator and steam line, and (3) primary piping, pressurizer and reactor coolant pump. The steady-state analysis for the ATLAS facility will be performed based on these calculation sheets, and its results will be applied to the detailed design of ATLAS. Additionally, the calculation results will contribute to getting optimum test conditions and preliminary operational test conditions for the steady-state and transient experiments

Inputs and spatial distribution patterns of Cr in Jiaozhou Bay

Science.gov (United States)

Yang, Dongfang; Miao, Zhenqing; Huang, Xinmin; Wei, Linzhen; Feng, Ming

2018-03-01

Cr pollution in marine bays has been one of the critical environmental issues, and understanding the input and spatial distribution patterns is essential to pollution control. In according to the source strengths of the major pollution sources, the input patterns of pollutants to marine bay include slight, moderate and heavy, and the spatial distribution are corresponding to three block models respectively. This paper analyzed input patterns and distributions of Cr in Jiaozhou Bay, eastern China based on investigation on Cr in surface waters during 1979-1983. Results showed that the input strengths of Cr in Jiaozhou Bay could be classified as moderate input and slight input, and the input strengths were 32.32-112.30 μg L-1 and 4.17-19.76 μg L-1, respectively. The input patterns of Cr included two patterns of moderate input and slight input, and the horizontal distributions could be defined by means of Block Model 2 and Block Model 3, respectively. In case of moderate input pattern via overland runoff, Cr contents were decreasing from the estuaries to the bay mouth, and the distribution pattern was parallel. In case of moderate input pattern via marine current, Cr contents were decreasing from the bay mouth to the bay, and the distribution pattern was parallel to circular. The Block Models were able to reveal the transferring process of various pollutants, and were helpful to understand the distributions of pollutants in marine bay.

Methods for Examining the Psychometric Quality of Subscores: A Review and Application

Science.gov (United States)

Wedman, Jonathan; Lyrén, Per-Erik

2015-01-01

When subscores on a test are reported to the test taker, the appropriateness of reporting them depends on whether they provide useful information above what is provided by the total score. Subscores that fail to do so lack adequate psychometric quality and should not be reported. There are several methods for examining the quality of subscores,…

Writing for the IELTS

CERN Document Server

Lougheed, Dr Lin

2016-01-01

This book guides test takers step-by-step through the process of writing an essay in response to a task. Learn how to apply what you’ve learned, familiarize yourself with the types of questions you’ll have to respond to on the test, complete your responses within the time limits, and more.

Modal Parameter Identification from Responses of General Unknown Random Inputs

DEFF Research Database (Denmark)

Ibrahim, S. R.; Asmussen, J. C.; Brincker, Rune

1996-01-01

Modal parameter identification from ambient responses due to a general unknown random inputs is investigated. Existing identification techniques which are based on assumptions of white noise and or stationary random inputs are utilized even though the inputs conditions are not satisfied....... This is accomplished via adding. In cascade. A force cascade conversion to the structures system under consideration. The input to the force conversion system is white noise and the output of which is the actual force(s) applied to the structure. The white noise input(s) and the structures responses are then used...

Off-line learning from clustered input examples

NARCIS (Netherlands)

Marangi, Carmela; Solla, Sara A.; Biehl, Michael; Riegler, Peter; Marinaro, Maria; Tagliaferri, Roberto

1996-01-01

We analyze the generalization ability of a simple perceptron acting on a structured input distribution for the simple case of two clusters of input data and a linearly separable rule. The generalization ability computed for three learning scenarios: maximal stability, Gibbs, and optimal learning, is

Input reduction for long-term morphodynamic simulations

NARCIS (Netherlands)

Walstra, D.J.R.; Ruessink, G.; Hoekstra, R.; Tonnon, P.K.

2013-01-01

Input reduction is imperative to long-term (> years) morphodynamic simulations to avoid excessive computation times. Here, we discuss the input-reduction framework for wave-dominated coastal settings introduced by Walstra et al. (2013). The framework comprised 4 steps, viz. (1) the selection of the

Input Enhancement and L2 Question Formation.

Science.gov (United States)

White, Lydia; And Others

1991-01-01

Investigated the extent to which form-focused instruction and corrective feedback (i.e., "input enhancement"), provided within a primarily communicative program, contribute to learners' accuracy in question formation. Study results are interpreted as evidence that input enhancement can bring about genuine changes in learners' interlanguage…

Smart-Guard: Defending User Input from Malware

DEFF Research Database (Denmark)

Denzel, Michael; Bruni, Alessandro; Ryan, Mark

2016-01-01

Trusted input techniques can profoundly enhance a variety of scenarios like online banking, electronic voting, Virtual Private Networks, and even commands to a server or Industrial Control System. To protect the system from malware of the sender’s computer, input needs to be reliably authenticated...

ORIGNATE: PC input processor for ORIGEN-S

International Nuclear Information System (INIS)

Bowman, S.M.

1992-01-01

ORIGNATE is a personal computer program that serves as a user- friendly interface for the ORIGEN-S isotopic generation and depletion code. It is designed to assist an ORIGEN-S user in preparing an input file for execution of light-water-reactor fuel depletion and decay cases. Output from ORIGNATE is a card-image input file that may be uploaded to a mainframe computer to execute ORIGEN-S in SCALE-4. ORIGNATE features a pulldown menu system that accesses sophisticated data entry screens. The program allows the user to quickly set up an ORIGEN-S input file and perform error checking

The High Level Vibration Test Program

International Nuclear Information System (INIS)

Hofmayer, C.H.; Curreri, J.R.; Park, Y.J.; Kato, W.Y.; Kawakami, S.

1989-01-01

As part of cooperative agreements between the United States and Japan, tests have been performed on the seismic vibration table at the Tadotsu Engineering Laboratory of Nuclear Power Engineering Test Center (NUPEC) in Japan. The objective of the test program was to use the NUPEC vibration table to drive large diameter nuclear power piping to substantial plastic strain with an earthquake excitation and to compare the results with state-of-the-art analysis of the problem. The test model was designed by modifying the 1/2.5 scale model of the PWR primary coolant loop. Elastic and inelastic seismic response behavior of the test model was measured in a number of test runs with an increasing excitation input level up to the limit of the vibration table. In the maximum input condition, large dynamic plastic strains were obtained in the piping. Crack initiation was detected following the second maximum excitation run. The test model was subjected to a maximum acceleration well beyond what nuclear power plants are designed to withstand. This paper describes the overall plan, input motion development, test procedure, test results and comparisons with pre-test analysis. 4 refs., 16 figs., 2 tabs

The High Level Vibration Test program

International Nuclear Information System (INIS)

Hofmayer, C.H.; Curreri, J.R.; Park, Y.J.; Kato, W.Y.; Kawakami, S.

1990-01-01

As part of cooperative agreements between the United States and Japan, tests have been performed on the seismic vibration table at the Tadotsu Engineering Laboratory of Nuclear Power Engineering Test Center (NUPEC) in Japan. The objective of the test program was to use the NUPEC vibration table to drive large diameter nuclear power piping to substantial plastic strain with an earthquake excitation and to compare the results with state-of-the-art analysis of the problem. The test model was designed by modifying the 1/2.5 scale model of the pressurized water reactor primary coolant loop. Elastic and inelastic seismic response behavior of the test model was measured in a number of test runs with an increasing excitation input level up to the limit of the vibration table. In the maximum input condition, large dynamic plastic strains were obtained in the piping. Crack initiation was detected following the second maximum excitation run. The test model was subjected to a maximum acceleration well beyond what nuclear power plants are designed to withstand. This paper describes the overall plan, input motion development, test procedure, test results and comparisons with pre-test analysis

Computer-Mediated Input, Output and Feedback in the Development of L2 Word Recognition from Speech

Science.gov (United States)

Matthews, Joshua; Cheng, Junyu; O'Toole, John Mitchell

2015-01-01

This paper reports on the impact of computer-mediated input, output and feedback on the development of second language (L2) word recognition from speech (WRS). A quasi-experimental pre-test/treatment/post-test research design was used involving three intact tertiary level English as a Second Language (ESL) classes. Classes were either assigned to…

CREATING INPUT TABLES FROM WAPDEG FOR RIP

International Nuclear Information System (INIS)

K.G. Mon

1998-01-01

The purpose of this calculation is to create tables for input into RIP ver. 5.18 (Integrated Probabilistic Simulator for Environmental Systems) from WAPDEG ver. 3.06 (Waste Package Degradation) output. This calculation details the creation of the RIP input tables for TSPA-VA REV.00

INPUT-OUTPUT ANALYSIS : THE NEXT 25 YEARS

NARCIS (Netherlands)

Dietzenbacher, Erik; Lenzen, Manfred; Los, Bart; Guan, Dabo; Lahr, Michael L.; Sancho, Ferran; Suh, Sangwon; Yang, Cuihong; Sancho, S.

2013-01-01

This year marks the 25th anniversary of the International Input-Output Association and the 25th volume of Economic Systems Research. To celebrate this anniversary, a group of eight experts provide their views on the future of input-output. Looking forward, they foresee progress in terms of data

Harmonize input selection for sediment transport prediction

Science.gov (United States)

Afan, Haitham Abdulmohsin; Keshtegar, Behrooz; Mohtar, Wan Hanna Melini Wan; El-Shafie, Ahmed

2017-09-01

In this paper, three modeling approaches using a Neural Network (NN), Response Surface Method (RSM) and response surface method basis Global Harmony Search (GHS) are applied to predict the daily time series suspended sediment load. Generally, the input variables for forecasting the suspended sediment load are manually selected based on the maximum correlations of input variables in the modeling approaches based on NN and RSM. The RSM is improved to select the input variables by using the errors terms of training data based on the GHS, namely as response surface method and global harmony search (RSM-GHS) modeling method. The second-order polynomial function with cross terms is applied to calibrate the time series suspended sediment load with three, four and five input variables in the proposed RSM-GHS. The linear, square and cross corrections of twenty input variables of antecedent values of suspended sediment load and water discharge are investigated to achieve the best predictions of the RSM based on the GHS method. The performances of the NN, RSM and proposed RSM-GHS including both accuracy and simplicity are compared through several comparative predicted and error statistics. The results illustrated that the proposed RSM-GHS is as uncomplicated as the RSM but performed better, where fewer errors and better correlation was observed (R = 0.95, MAE = 18.09 (ton/day), RMSE = 25.16 (ton/day)) compared to the ANN (R = 0.91, MAE = 20.17 (ton/day), RMSE = 33.09 (ton/day)) and RSM (R = 0.91, MAE = 20.06 (ton/day), RMSE = 31.92 (ton/day)) for all types of input variables.

The Thurgood Marshall School of Law Empirical Findings: A Report of the Watson-Glaser for the 2009-2010 Test Takers

Science.gov (United States)

Kadhi, T.; Palasota, A.; Holley, D.; Rudley, D.

2010-01-01

The following report gives the statistical findings of the 2009-2010 Watson-Glaser test. Data is pre-existing and was given to the Evaluator by email from the Director, Center for Legal Pedagogy. Statistical analyses were run using SPSS 17 to address the following questions: 1. What are the statistical descriptors of the Watson-Glaser results of…

Real-Time Extended Interface Automata for Software Testing Cases Generation

Science.gov (United States)

Yang, Shunkun; Xu, Jiaqi; Man, Tianlong; Liu, Bin

2014-01-01

Testing and verification of the interface between software components are particularly important due to the large number of complex interactions, which requires the traditional modeling languages to overcome the existing shortcomings in the aspects of temporal information description and software testing input controlling. This paper presents the real-time extended interface automata (RTEIA) which adds clearer and more detailed temporal information description by the application of time words. We also establish the input interface automaton for every input in order to solve the problems of input controlling and interface covering nimbly when applied in the software testing field. Detailed definitions of the RTEIA and the testing cases generation algorithm are provided in this paper. The feasibility and efficiency of this method have been verified in the testing of one real aircraft braking system. PMID:24892080

Fuzzy/Neural Software Estimates Costs of Rocket-Engine Tests

Science.gov (United States)

Douglas, Freddie; Bourgeois, Edit Kaminsky

2005-01-01

The Highly Accurate Cost Estimating Model (HACEM) is a software system for estimating the costs of testing rocket engines and components at Stennis Space Center. HACEM is built on a foundation of adaptive-network-based fuzzy inference systems (ANFIS) a hybrid software concept that combines the adaptive capabilities of neural networks with the ease of development and additional benefits of fuzzy-logic-based systems. In ANFIS, fuzzy inference systems are trained by use of neural networks. HACEM includes selectable subsystems that utilize various numbers and types of inputs, various numbers of fuzzy membership functions, and various input-preprocessing techniques. The inputs to HACEM are parameters of specific tests or series of tests. These parameters include test type (component or engine test), number and duration of tests, and thrust level(s) (in the case of engine tests). The ANFIS in HACEM are trained by use of sets of these parameters, along with costs of past tests. Thereafter, the user feeds HACEM a simple input text file that contains the parameters of a planned test or series of tests, the user selects the desired HACEM subsystem, and the subsystem processes the parameters into an estimate of cost(s).

The Effect of English Language on Multiple Choice Question Scores of Thai Medical Students.

Science.gov (United States)

Phisalprapa, Pochamana; Muangkaew, Wayuda; Assanasen, Jintana; Kunavisarut, Tada; Thongngarm, Torpong; Ruchutrakool, Theera; Kobwanthanakun, Surapon; Dejsomritrutai, Wanchai

2016-04-01

Universities in Thailand are preparing for Thailand's integration into the ASEAN Economic Community (AEC) by increasing the number of tests in English language. English language is not the native language of Thailand Differences in English language proficiency may affect scores among test-takers, even when subject knowledge among test-takers is comparable and may falsely represent the knowledge level of the test-taker. To study the impact of English language multiple choice test questions on test scores of medical students. The final examination of fourth-year medical students completing internal medicine rotation contains 120 multiple choice questions (MCQ). The languages used on the test are Thai and English at a ratio of 3:1. Individual scores of tests taken in both languages were collected and the effect of English language on MCQ was analyzed Individual MCQ scores were then compared with individual student English language proficiency and student grade point average (GPA). Two hundred ninety five fourth-year medical students were enrolled. The mean percentage of MCQ scores in Thai and English were significantly different (65.0 ± 8.4 and 56.5 ± 12.4, respectively, p English was fair (Spearman's correlation coefficient = 0.41, p English than in Thai language. Students were classified into six grade categories (A, B+, B, C+, C, and D+), which cumulatively measured total internal medicine rotation performance score plus final examination score. MCQ scores from Thai language examination were more closely correlated with total course grades than were the scores from English language examination (Spearman's correlation coefficient = 0.73 (p English proficiency score was very high, at 3.71 ± 0.35 from a total of 4.00. Mean student GPA was 3.40 ± 0.33 from a possible 4.00. English language MCQ examination scores were more highly associated with GPA than with English language proficiency. The use of English language multiple choice question test may decrease scores

Automated input data management in manufacturing process simulation

OpenAIRE

Ettefaghian, Alireza

2015-01-01

Input Data Management (IDM) is a time consuming and costly process for Discrete Event Simulation (DES) projects. Input Data Management is considered as the basis of real-time process simulation (Bergmann, Stelzer and Strassburger, 2011). According to Bengtsson et al. (2009), data input phase constitutes on the average about 31% of the time of an entire simulation project. Moreover, the lack of interoperability between manufacturing applications and simulation software leads to a high cost to ...

Radioactive inputs to the North Sea and the Channel

International Nuclear Information System (INIS)

1984-01-01

The subject is covered in sections: introduction (radioactivity; radioisotopes; discharges from nuclear establishments); data sources (statutory requirements); sources of liquid radioactive waste (figure showing location of principal sources of radioactive discharges; tables listing principal discharges by activity and by nature of radioisotope); Central Electricity Generating Board nuclear power stations; research and industrial establishments; Ministy of Defence establishments; other UK inputs of radioactive waste; total inputs to the North Sea and the Channel (direct inputs; river inputs; adjacent sea areas); conclusions. (U.K.)

Assessing the Implicit Achievement Motive: Effects of Input- Condition, Administration And Picture -Position

Directory of Open Access Journals (Sweden)

Nicole Gruber

2015-09-01

Full Text Available Implicit measurements are sensitive for influences of experimenter and situation. An assessment using computers could therefore avert those negative effects, if there is an adequate translation to computer (Blankenship, 2010. We split the implicit achievement motive into the two components hope of success (HS and fear of failure (FF and investigated the effects of input condition (handwritten vs. keyboard, administration (online vs. computer vs. human experimenter and picture-position for each of these two components. Therefore 140 undergraduates were randomly assigned to 18 experimental groupsof a counterbalance within-between-design and assessed with the Thematic-Apperception-Test (TAT; Heckhausen, 1963. The outcome is that handwriting increases the HS-score, whereby FF- score did not differ in typed and handwritten answers. People instructed by human experimenter show higher FF and lower HS compared tocomputer based tested people in the labor and online There is no statistical significant interaction effectof administration and input condition. There is either no position effect for any of these motive-components. The TAT seems to be more robust than commonly thought.

Non-perturbative inputs for gluon distributions in the hadrons

International Nuclear Information System (INIS)

Ermolaev, B.I.; Troyan, S.I.

2017-01-01

Description of hadronic reactions at high energies is conventionally done in the framework of QCD factorization. All factorization convolutions comprise non-perturbative inputs mimicking non-perturbative contributions and perturbative evolution of those inputs. We construct inputs for the gluon-hadron scattering amplitudes in the forward kinematics and, using the optical theorem, convert them into inputs for gluon distributions in the hadrons, embracing the cases of polarized and unpolarized hadrons. In the first place, we formulate mathematical criteria which any model for the inputs should obey and then suggest a model satisfying those criteria. This model is based on a simple reasoning: after emitting an active parton off the hadron, the remaining set of spectators becomes unstable and therefore it can be described through factors of the resonance type, so we call it the resonance model. We use it to obtain non-perturbative inputs for gluon distributions in unpolarized and polarized hadrons for all available types of QCD factorization: basic, K_T-and collinear factorizations. (orig.)

SO2 policy and input substitution under spatial monopoly

International Nuclear Information System (INIS)

Gerking, Shelby; Hamilton, Stephen F.

2010-01-01

Following the U.S. Clean Air Act Amendments of 1990, electric utilities dramatically increased their utilization of low-sulfur coal from the Powder River Basin (PRB). Recent studies indicate that railroads hauling PRB coal exercise a substantial degree of market power and that relative price changes in the mining and transportation sectors were contributing factors to the observed pattern of input substitution. This paper asks the related question: To what extent does more stringent SO 2 policy stimulate input substitution from high-sulfur coal to low-sulfur coal when railroads hauling low-sulfur coal exercise spatial monopoly power? The question underpins the effectiveness of incentive-based environmental policies given the essential role of market performance in input, output, and abatement markets in determining the social cost of regulation. Our analysis indicates that environmental regulation leads to negligible input substitution effects when clean and dirty inputs are highly substitutable and the clean input market is mediated by a spatial monopolist. (author)

Non-perturbative inputs for gluon distributions in the hadrons

Energy Technology Data Exchange (ETDEWEB)

Ermolaev, B.I. [Ioffe Physico-Technical Institute, Saint Petersburg (Russian Federation); Troyan, S.I. [St. Petersburg Institute of Nuclear Physics, Gatchina (Russian Federation)

2017-03-15

Description of hadronic reactions at high energies is conventionally done in the framework of QCD factorization. All factorization convolutions comprise non-perturbative inputs mimicking non-perturbative contributions and perturbative evolution of those inputs. We construct inputs for the gluon-hadron scattering amplitudes in the forward kinematics and, using the optical theorem, convert them into inputs for gluon distributions in the hadrons, embracing the cases of polarized and unpolarized hadrons. In the first place, we formulate mathematical criteria which any model for the inputs should obey and then suggest a model satisfying those criteria. This model is based on a simple reasoning: after emitting an active parton off the hadron, the remaining set of spectators becomes unstable and therefore it can be described through factors of the resonance type, so we call it the resonance model. We use it to obtain non-perturbative inputs for gluon distributions in unpolarized and polarized hadrons for all available types of QCD factorization: basic, K{sub T}-and collinear factorizations. (orig.)

Specimen Test of Large-Heat-Input Fusion Welding Method for Use of SM570TMCP

Directory of Open Access Journals (Sweden)

Dongkyu Lee

2015-01-01

Full Text Available In this research, the large-heat-input welding conditions optimized to use the rear plate and the high-performance steel of SM570TMCP, a new kind of steel suitable for the requirements of prospective customers, are proposed. The goal of this research is to contribute to securing the welding fabrication optimized to use the high-strength steel and rear steel plates in the field of construction industry in the future. This research is judged to contribute to securing the welding fabrication optimized to use the high-strength steel and rear steel plates in the field of construction industry in the future.

CBM first-level event selector input interface

Energy Technology Data Exchange (ETDEWEB)

Hutter, Dirk [Frankfurt Institute for Advanced Studies, Goethe University, Frankfurt (Germany); Collaboration: CBM-Collaboration

2016-07-01

The CBM First-level Event Selector (FLES) is the central event selection system of the upcoming CBM experiment at FAIR. Designed as a high-performance computing cluster, its task is an online analysis of the physics data at a total data rate exceeding 1 TByte/s. To allow efficient event selection, the FLES performs timeslice building, which combines the data from all given input links to self-contained, overlapping processing intervals and distributes them to compute nodes. Partitioning the input data streams into specialized containers allows to perform this task very efficiently. The FLES Input Interface defines the linkage between FEE and FLES data transport framework. Utilizing a custom FPGA board, it receives data via optical links, prepares them for subsequent timeslice building, and transfers the data via DMA to the PC's memory. An accompanying HDL module implements the front-end logic interface and FLES link protocol in the front-end FPGAs. Prototypes of all Input Interface components have been implemented and integrated into the FLES framework. In contrast to earlier prototypes, which included components to work without a FPGA layer between FLES and FEE, the structure matches the foreseen final setup. This allows the implementation and evaluation of the final CBM read-out chain. An overview of the FLES Input Interface as well as studies on system integration and system start-up are presented.

Effects of heat input on mechanical properties of metal inert gas welded 1.6 mm thick galvanized steel sheet

International Nuclear Information System (INIS)

Rafiqul, M I; Ishak, M; Rahman, M M

2012-01-01

It is usually a lot easier and less expensive to galvanize steel before it is welded into useful products. Galvanizing afterwards is almost impossible. In this research work, Galvanized Steel was welded by using the ER 308L stainless steel filler material. This work was done to find out an alternative way of welding and investigate the effects of heat input on the mechanical properties of butt welded joints of Galvanized Steel. A 13.7 kW maximum capacity MIG welding machine was used to join 1.6 mm thick sheet of galvanized steel with V groove and no gap between mm. Heat inputs was gradually increased from 21.06 to 25.07 joules/mm in this study. The result shows almost macro defects free welding and with increasing heat input the ultimate tensile strength and welding efficiency decrease. The Vickers hardness also decreases at HAZ with increasing heat input and for each individual specimen; hardness was lowest in heat affected zone (HAZ), intermediate in base metal and maximum in welded zone. The fracture for all specimens was in the heat affected zone while testing in the universal testing machine.

Effects of heat input on mechanical properties of metal inert gas welded 1.6 mm thick galvanized steel sheet

Science.gov (United States)

Rafiqul, M. I.; Ishak, M.; Rahman, M. M.

2012-09-01

It is usually a lot easier and less expensive to galvanize steel before it is welded into useful products. Galvanizing afterwards is almost impossible. In this research work, Galvanized Steel was welded by using the ER 308L stainless steel filler material. This work was done to find out an alternative way of welding and investigate the effects of heat input on the mechanical properties of butt welded joints of Galvanized Steel. A 13.7 kW maximum capacity MIG welding machine was used to join 1.6 mm thick sheet of galvanized steel with V groove and no gap between mm. Heat inputs was gradually increased from 21.06 to 25.07 joules/mm in this study. The result shows almost macro defects free welding and with increasing heat input the ultimate tensile strength and welding efficiency decrease. The Vickers hardness also decreases at HAZ with increasing heat input and for each individual specimen; hardness was lowest in heat affected zone (HAZ), intermediate in base metal and maximum in welded zone. The fracture for all specimens was in the heat affected zone while testing in the universal testing machine.

Understanding How Kurtosis Is Transferred from Input Acceleration to Stress Response and Its Influence on Fatigue Llife

Science.gov (United States)

Kihm, Frederic; Rizzi, Stephen A.; Ferguson, Neil S.; Halfpenny, Andrew

2013-01-01

High cycle fatigue of metals typically occurs through long term exposure to time varying loads which, although modest in amplitude, give rise to microscopic cracks that can ultimately propagate to failure. The fatigue life of a component is primarily dependent on the stress amplitude response at critical failure locations. For most vibration tests, it is common to assume a Gaussian distribution of both the input acceleration and stress response. In real life, however, it is common to experience non-Gaussian acceleration input, and this can cause the response to be non-Gaussian. Examples of non-Gaussian loads include road irregularities such as potholes in the automotive world or turbulent boundary layer pressure fluctuations for the aerospace sector or more generally wind, wave or high amplitude acoustic loads. The paper first reviews some of the methods used to generate non-Gaussian excitation signals with a given power spectral density and kurtosis. The kurtosis of the response is examined once the signal is passed through a linear time invariant system. Finally an algorithm is presented that determines the output kurtosis based upon the input kurtosis, the input power spectral density and the frequency response function of the system. The algorithm is validated using numerical simulations. Direct applications of these results include improved fatigue life estimations and a method to accelerate shaker tests by generating high kurtosis, non-Gaussian drive signals.

Multi-Input Convolutional Neural Network for Flower Grading

Directory of Open Access Journals (Sweden)

Yu Sun

2017-01-01

Full Text Available Flower grading is a significant task because it is extremely convenient for managing the flowers in greenhouse and market. With the development of computer vision, flower grading has become an interdisciplinary focus in both botany and computer vision. A new dataset named BjfuGloxinia contains three quality grades; each grade consists of 107 samples and 321 images. A multi-input convolutional neural network is designed for large scale flower grading. Multi-input CNN achieves a satisfactory accuracy of 89.6% on the BjfuGloxinia after data augmentation. Compared with a single-input CNN, the accuracy of multi-input CNN is increased by 5% on average, demonstrating that multi-input convolutional neural network is a promising model for flower grading. Although data augmentation contributes to the model, the accuracy is still limited by lack of samples diversity. Majority of misclassification is derived from the medium class. The image processing based bud detection is useful for reducing the misclassification, increasing the accuracy of flower grading to approximately 93.9%.

Effect of Heat Input on Microstructure and Hardness Distribution of Laser Welded Si-Al TRIP-Type Steel

Directory of Open Access Journals (Sweden)

Adam Grajcar

2014-01-01

Full Text Available This study is concerned with issues related to laser welding of Si-Al type TRIP steels with Nb and Ti microadditions. The tests of laser welding of thermomechanically rolled sheet sections were carried out using keyhole welding and a solid-state laser. The tests carried out for various values of heat input were followed by macro- and microscopic metallographic investigations as well as by microhardness measurements of welded areas. A detailed microstructural analysis was carried out in the penetration area and in various areas of the heat affected zone (HAZ. Special attention was paid to the influence of cooling conditions on the stabilisation of retained austenite, the most characteristic structural component of TRIP steels. The tests made it possible to determine the maximum value of heat input preventing the excessive grain growth in HAZ and to identify the areas of the greatest hardness reaching 520 HV0.1.

Input Shaping to Reduce Solar Array Structural Vibrations

Science.gov (United States)

Doherty, Michael J.; Tolson, Robert J.

1998-01-01

Structural vibrations induced by actuators can be minimized using input shaping. Input shaping is a feedforward method in which actuator commands are convolved with shaping functions to yield a shaped set of commands. These commands are designed to perform the maneuver while minimizing the residual structural vibration. In this report, input shaping is extended to stepper motor actuators. As a demonstration, an input-shaping technique based on pole-zero cancellation was used to modify the Solar Array Drive Assembly (SADA) actuator commands for the Lewis satellite. A series of impulses were calculated as the ideal SADA output for vibration control. These impulses were then discretized for use by the SADA stepper motor actuator and simulated actuator outputs were used to calculate the structural response. The effectiveness of input shaping is limited by the accuracy of the knowledge of the modal frequencies. Assuming perfect knowledge resulted in significant vibration reduction. Errors of 10% in the modal frequencies caused notably higher levels of vibration. Controller robustness was improved by incorporating additional zeros in the shaping function. The additional zeros did not require increased performance from the actuator. Despite the identification errors, the resulting feedforward controller reduced residual vibrations to the level of the exactly modeled input shaper and well below the baseline cases. These results could be easily applied to many other vibration-sensitive applications involving stepper motor actuators.

Plasticity of the cis-regulatory input function of a gene.

Directory of Open Access Journals (Sweden)

Avraham E Mayo

2006-04-01

Full Text Available The transcription rate of a gene is often controlled by several regulators that bind specific sites in the gene's cis-regulatory region. The combined effect of these regulators is described by a cis-regulatory input function. What determines the form of an input function, and how variable is it with respect to mutations? To address this, we employ the well-characterized lac operon of Escherichia coli, which has an elaborate input function, intermediate between Boolean AND-gate and OR-gate logic. We mapped in detail the input function of 12 variants of the lac promoter, each with different point mutations in the regulator binding sites, by means of accurate expression measurements from living cells. We find that even a few mutations can significantly change the input function, resulting in functions that resemble Pure AND gates, OR gates, or single-input switches. Other types of gates were not found. The variant input functions can be described in a unified manner by a mathematical model. The model also lets us predict which functions cannot be reached by point mutations. The input function that we studied thus appears to be plastic, in the sense that many of the mutations do not ruin the regulation completely but rather result in new ways to integrate the inputs.

Real-Time Extended Interface Automata for Software Testing Cases Generation

Directory of Open Access Journals (Sweden)

Shunkun Yang

2014-01-01

Full Text Available Testing and verification of the interface between software components are particularly important due to the large number of complex interactions, which requires the traditional modeling languages to overcome the existing shortcomings in the aspects of temporal information description and software testing input controlling. This paper presents the real-time extended interface automata (RTEIA which adds clearer and more detailed temporal information description by the application of time words. We also establish the input interface automaton for every input in order to solve the problems of input controlling and interface covering nimbly when applied in the software testing field. Detailed definitions of the RTEIA and the testing cases generation algorithm are provided in this paper. The feasibility and efficiency of this method have been verified in the testing of one real aircraft braking system.

The comparison of visual working memory representations with perceptual inputs.

Science.gov (United States)

Hyun, Joo-seok; Woodman, Geoffrey F; Vogel, Edward K; Hollingworth, Andrew; Luck, Steven J

2009-08-01

The human visual system can notice differences between memories of previous visual inputs and perceptions of new visual inputs, but the comparison process that detects these differences has not been well characterized. In this study, the authors tested the hypothesis that differences between the memory of a stimulus array and the perception of a new array are detected in a manner that is analogous to the detection of simple features in visual search tasks. That is, just as the presence of a task-relevant feature in visual search can be detected in parallel, triggering a rapid shift of attention to the object containing the feature, the presence of a memory-percept difference along a task-relevant dimension can be detected in parallel, triggering a rapid shift of attention to the changed object. Supporting evidence was obtained in a series of experiments in which manual reaction times, saccadic reaction times, and event-related potential latencies were examined. However, these experiments also showed that a slow, limited-capacity process must occur before the observer can make a manual change detection response.

SP-100 Position Multiplexer and Analog Input Processor

International Nuclear Information System (INIS)

Syed, A.; Gilliland, K.; Shukla, J.N.

1992-01-01

This paper describes the design, implementation, and performance test results of an engineering model of the Position Multiplexer (MUX)-Analog Input Processor (AIP) System for the transmission and continuous measurements of Reflector Control Drive position in SP-100. This paper describes the work performed to determine the practical circuit limitations, investigate the circuit/component degradation of the multiplexer due to radiation, develop an interference cancellation technique, and evaluate the measurement accuracy as a function of resolver angle, temperature, radiation, and interference. The system developed performs a complex cross-correlation between the resolver excitation and the resolver sine cosine outputs, from which the precise resolver amplitude and phase can be determined while simultaneously eliminating virtually all uncorrelated interference

Modeling inputs to computer models used in risk assessment

International Nuclear Information System (INIS)

Iman, R.L.

1987-01-01

Computer models for various risk assessment applications are closely scrutinized both from the standpoint of questioning the correctness of the underlying mathematical model with respect to the process it is attempting to model and from the standpoint of verifying that the computer model correctly implements the underlying mathematical model. A process that receives less scrutiny, but is nonetheless of equal importance, concerns the individual and joint modeling of the inputs. This modeling effort clearly has a great impact on the credibility of results. Model characteristics are reviewed in this paper that have a direct bearing on the model input process and reasons are given for using probabilities-based modeling with the inputs. The authors also present ways to model distributions for individual inputs and multivariate input structures when dependence and other constraints may be present

The Efficiency of Quantum Identity Testing of Multiple States

OpenAIRE

Kada, Masaru; Nishimura, Harumichi; Yamakami, Tomoyuki

2008-01-01

We examine two quantum operations, the Permutation Test and the Circle Test, which test the identity of n quantum states. These operations naturally extend the well-studied Swap Test on two quantum states. We first show the optimality of the Permutation Test for any input size n as well as the optimality of the Circle Test for three input states. In particular, when n=3, we present a semi-classical protocol, incorporated with the Swap Test, which approximates the Circle Test efficiently. Furt...

The importance of accurate meteorological input fields and accurate planetary boundary layer parameterizations, tested against ETEX-1

International Nuclear Information System (INIS)

Brandt, J.; Ebel, A.; Elbern, H.; Jakobs, H.; Memmesheimer, M.; Mikkelsen, T.; Thykier-Nielsen, S.; Zlatev, Z.

1997-01-01

Atmospheric transport of air pollutants is, in principle, a well understood process. If information about the state of the atmosphere is given in all details (infinitely accurate information about wind speed, etc.) and infinitely fast computers are available then the advection equation could in principle be solved exactly. This is, however, not the case: discretization of the equations and input data introduces some uncertainties and errors in the results. Therefore many different issues have to be carefully studied in order to diminish these uncertainties and to develop an accurate transport model. Some of these are e.g. the numerical treatment of the transport equation, accuracy of the mean meteorological input fields and parameterizations of sub-grid scale phenomena (as e.g. parameterizations of the 2 nd and higher order turbulence terms in order to reach closure in the perturbation equation). A tracer model for studying transport and dispersion of air pollution caused by a single but strong source is under development. The model simulations from the first ETEX release illustrate the differences caused by using various analyzed fields directly in the tracer model or using a meteorological driver. Also different parameterizations of the mixing height and the vertical exchange are compared. (author)

An Approach for Generating Precipitation Input for Worst-Case Flood Modelling

Science.gov (United States)

Felder, Guido; Weingartner, Rolf

2015-04-01

There is a lack of suitable methods for creating precipitation scenarios that can be used to realistically estimate peak discharges with very low probabilities. On the one hand, existing methods are methodically questionable when it comes to physical system boundaries. On the other hand, the spatio-temporal representativeness of precipitation patterns as system input is limited. In response, this study proposes a method of deriving representative spatio-temporal precipitation patterns and presents a step towards making methodically correct estimations of infrequent floods by using a worst-case approach. A Monte-Carlo rainfall-runoff model allows for the testing of a wide range of different spatio-temporal distributions of an extreme precipitation event and therefore for the generation of a hydrograph for each of these distributions. Out of these numerous hydrographs and their corresponding peak discharges, the worst-case catchment reactions on the system input can be derived. The spatio-temporal distributions leading to the highest peak discharges are identified and can eventually be used for further investigations.

Remote input/output station

CERN Multimedia

1972-01-01

A general view of the remote input/output station installed in building 112 (ISR) and used for submitting jobs to the CDC 6500 and 6600. The card reader on the left and the line printer on the right are operated by programmers on a self-service basis.

Comparison of Linear Microinstability Calculations of Varying Input Realism

International Nuclear Information System (INIS)

Rewoldt, G.

2003-01-01

The effect of varying ''input realism'' or varying completeness of the input data for linear microinstability calculations, in particular on the critical value of the ion temperature gradient for the ion temperature gradient mode, is investigated using gyrokinetic and gyrofluid approaches. The calculations show that varying input realism can have a substantial quantitative effect on the results

Comparison of linear microinstability calculations of varying input realism

International Nuclear Information System (INIS)

Rewoldt, G.; Kinsey, J.E.

2004-01-01

The effect of varying 'input realism' or varying completeness of the input data for linear microinstability calculations, in particular on the critical value of the ion temperature gradient for the ion temperature gradient mode, is investigated using gyrokinetic and gyrofluid approaches. The calculations show that varying input realism can have a substantial quantitative effect on the results

A test plan for an on-line whole building energy calculator

Energy Technology Data Exchange (ETDEWEB)

Purdy, J.; Ferguson, A.; Mombourquette, S.; Haddad, K.; Lopez, P.; Wyndham-Wheeler, P.; Henry, S. [CANMET Energy Technology Centre, Natural Resources, Ottawa, Ont. (Canada)

2008-04-15

This paper presents the testing of a dynamic on-line whole-building energy calculator. The tool consists of a web-based interface for user inputs; an application to create the simulation input files from these user inputs; a simulation engine; and an application for passing the simulation engine output back to the interface and user. A detailed test protocol, composed of three parts, was developed as part of the software development process for quality assurance purposes. This paper will present the tasks specific to the development of the simulation engine, including, the definition of the required user inputs, the creation of default house archetypes, and the definition of the results to be presented to the user. It will also investigate the three parts of the test plan as well as the task automation tools developed to facilitate the testing. The use of these tools proved very useful given the large number of combinations of user inputs at the web interface and input files to the simulation engine. The findings show the importance of having a detailed and comprehensive test protocol during the software development phase. (author)

Wavelet-Based Frequency Response Function: Comparative Study of Input Excitation

Directory of Open Access Journals (Sweden)

K. Dziedziech

2014-01-01

Full Text Available Time-variant systems can be found in many areas of engineering. It is widely accepted that the classical Fourier-based methods are not suitable for the analysis and identification of such systems. The time-variant frequency response function—based on the continuous wavelet transform—is used in this paper for the analysis of time-variant systems. The focus is on the comparative study of various broadband input excitations. The performance of the method is tested using simulated data from a simple MDOF system and experimental data from a frame-like structure.

READDATA: a FORTRAN 77 codeword input package

International Nuclear Information System (INIS)

Lander, P.A.

1983-07-01

A new codeword input package has been produced as a result of the incompatibility between different dialects of FORTRAN, especially when character variables are passed as parameters. This report is for those who wish to use a codeword input package with FORTRAN 77. The package, called ''Readdata'', attempts to combine the best features of its predecessors such as BINPUT and pseudo-BINPUT. (author)

Originate: PC input processor for origen-S

International Nuclear Information System (INIS)

Bowman, S.M.

1994-01-01

ORIGINATE is a personal computer program developed at Oak Ridge National Laboratory to serve as a user-friendly interface for the ORIGEN-S isotopic generation and depletion code. It is designed to assist an ORIGEN-S user in preparing an input file for execution of light-water-reactor fuel depletion and decay cases. Output from ORIGINATE is a card-image input file that may be uploaded to a mainframe computer to execute ORIGEN-S in SCALE-4. ORIGINATE features a pull down menu system that accesses sophisticated data entry screens. The program allows the user to quickly set up an ORIGEN-S input file and perform error checking. This capability increases productivity and decreases chance of user error. (authors). 6 refs., 3 tabs

Energy Systems Test Area (ESTA) Pyrotechnic Operations: User Test Planning Guide

Science.gov (United States)

Hacker, Scott

2012-01-01

The Johnson Space Center (JSC) has created and refined innovative analysis, design, development, and testing techniques that have been demonstrated in all phases of spaceflight. JSC is uniquely positioned to apply this expertise to components, systems, and vehicles that operate in remote or harsh environments. We offer a highly skilled workforce, unique facilities, flexible project management, and a proven management system. The purpose of this guide is to acquaint Test Requesters with the requirements for test, analysis, or simulation services at JSC. The guide includes facility services and capabilities, inputs required by the facility, major milestones, a roadmap of the facility s process, and roles and responsibilities of the facility and the requester. Samples of deliverables, facility interfaces, and inputs necessary to define the cost and schedule are included as appendices to the guide.

Smart mobility solution with multiple input Output interface.

Science.gov (United States)

Sethi, Aartika; Deb, Sujay; Ranjan, Prabhat; Sardar, Arghya

2017-07-01

Smart wheelchairs are commonly used to provide solution for mobility impairment. However their usage is limited primarily due to high cost owing from sensors required for giving input, lack of adaptability for different categories of input and limited functionality. In this paper we propose a smart mobility solution using smartphone with inbuilt sensors (accelerometer, camera and speaker) as an input interface. An Emotiv EPOC+ is also used for motor imagery based input control synced with facial expressions in cases of extreme disability. Apart from traction, additional functions like home security and automation are provided using Internet of Things (IoT) and web interfaces. Although preliminary, our results suggest that this system can be used as an integrated and efficient solution for people suffering from mobility impairment. The results also indicate a decent accuracy is obtained for the overall system.

Input Calibration and Validation of RELAP5 Against CIRCUS-IV Single Channel Tests on Natural Circulation Two-Phase Flow Instability

Directory of Open Access Journals (Sweden)

Viet-Anh Phung

2015-01-01

Full Text Available RELAP5 is a system thermal-hydraulic code that is used to perform safety analysis on nuclear reactors. Since the code is based on steady state, two-phase flow regime maps, there is a concern that RELAP5 may provide significant errors for rapid transient conditions. In this work, the capability of RELAP5 code to predict the oscillatory behavior of a natural circulation driven, two-phase flow at low pressure is investigated. The simulations are compared with a series of experiments that were performed in the CIRCUS-IV facility at the Delft University of Technology. For this purpose, we developed a procedure for calibration of the input and code validation. The procedure employs (i multiple parameters measured in different regimes, (ii independent consideration of the subsections of the loop, and (iii assessment of importance of the uncertain input parameters. We found that predicted system parameters are less sensitive to variations of the uncertain input and boundary conditions in high frequency oscillations regime. It is shown that calculation results overlap experimental values, except for the high frequency oscillations regime where the maximum inlet flow rate was overestimated. This finding agrees with the idea that steady state, two-phase flow regime maps might be one of the possible reasons for the discrepancy in case of rapid transients in two-phase systems.

Input data required for specific performance assessment codes

International Nuclear Information System (INIS)

Seitz, R.R.; Garcia, R.S.; Starmer, R.J.; Dicke, C.A.; Leonard, P.R.; Maheras, S.J.; Rood, A.S.; Smith, R.W.

1992-02-01

The Department of Energy's National Low-Level Waste Management Program at the Idaho National Engineering Laboratory generated this report on input data requirements for computer codes to assist States and compacts in their performance assessments. This report gives generators, developers, operators, and users some guidelines on what input data is required to satisfy 22 common performance assessment codes. Each of the codes is summarized and a matrix table is provided to allow comparison of the various input required by the codes. This report does not determine or recommend which codes are preferable

A single point of pressure approach as input for injury models with respect to complex blast loading conditions

NARCIS (Netherlands)

Teland, J.A.; Doormaal, J.C.A.M. van; Horst, M.J. van der; Svinsås, E.

2010-01-01

Blast injury models, like Axelsson and Stuhmiller, require four pressure signals as input. Those pressure signals must be acquired by a Blast Test Device (BTD) that has four pressure transducers placed in a horizontal plane at intervals of 90 degrees. This can be either in a physical test setup or

Effects of task-switching on neural representations of ambiguous sound input.

Science.gov (United States)

Sussman, Elyse S; Bregman, Albert S; Lee, Wei-Wei

2014-11-01

The ability to perceive discrete sound streams in the presence of competing sound sources relies on multiple mechanisms that organize the mixture of the auditory input entering the ears. Many studies have focused on mechanisms that contribute to integrating sounds that belong together into one perceptual stream (integration) and segregating those that come from different sound sources (segregation). However, little is known about mechanisms that allow us to perceive individual sound sources within a dynamically changing auditory scene, when the input may be ambiguous, and heard as either integrated or segregated. This study tested the question of whether focusing on one of two possible sound organizations suppressed representation of the alternative organization. We presented listeners with ambiguous input and cued them to switch between tasks that used either the integrated or the segregated percept. Electrophysiological measures indicated which organization was currently maintained in memory. If mutual exclusivity at the neural level was the rule, attention to one of two possible organizations would preclude neural representation of the other. However, significant MMNs were elicited to both the target organization and the unattended, alternative organization, along with the target-related P3b component elicited only to the designated target organization. Results thus indicate that both organizations (integrated and segregated) were simultaneously maintained in memory regardless of which task was performed. Focusing attention to one aspect of the sounds did not abolish the alternative, unattended organization when the stimulus input was ambiguous. In noisy environments, such as walking on a city street, rapid and flexible adaptive processes are needed to help facilitate rapid switching to different sound sources in the environment. Having multiple representations available to the attentive system would allow for such flexibility, needed in everyday situations to

Feasibility of remote administration of the Fundamentals of Laparoscopic Surgery (FLS) skills test.

Science.gov (United States)

Okrainec, Allan; Vassiliou, Melina; Kapoor, Andrew; Pitzul, Kristen; Henao, Oscar; Kaneva, Pepa; Jackson, Timothy; Ritter, E Matt

2013-11-01

Fundamentals of Laparoscopic Surgery (FLS) certification testing currently is offered at accredited test centers or at select surgical conferences. Maintaining these test centers requires considerable investment in human and financial resources. Additionally, it can be challenging for individuals outside North America to become FLS certified. The objective of this pilot study was to assess the feasibility of remotely administering and scoring the FLS examination using live videoconferencing compared with standard onsite testing. This parallel mixed-methods study used both FLS scoring data and participant feedback to determine the barriers to feasibility of remote proctoring for the FLS examination. Participants were tested at two accredited FLS testing centers. An official FLS proctor administered and scored the FLS exam remotely while another onsite proctor provided a live score of participants' performance. Participant feedback was collected during testing. Interrater reliabilities of onsite and remote FLS scoring data were compared using intraclass correlation coefficients (ICCs). Participant feedback was analyzed using modified grounded theory to identify themes for barriers to feasibility. The scores of the remote and onsite proctors showed excellent interrater reliability in the total FLS (ICC 0.995, CI [0.985-0.998]). Several barriers led to critical errors in remote scoring, but most were accompanied by a solution incorporated into the study protocol. The most common barrier was the chain of custody for exam accessories. The results of this pilot study suggest that remote administration of the FLS has the potential to decrease costs without altering test-taker scores or exam validity. Further research is required to validate protocols for remote and onsite proctors and to direct execution of these protocols in a controlled environment identical to current FLS test administration.

Development of a compact and cost effective multi-input digital signal processing system

Science.gov (United States)

Darvish-Molla, Sahar; Chin, Kenrick; Prestwich, William V.; Byun, Soo Hyun

2018-01-01

A prototype digital signal processing system (DSP) was developed using a microcontroller interfaced with a 12-bit sampling ADC, which offers a considerably inexpensive solution for processing multiple detectors with high throughput. After digitization of the incoming pulses, in order to maximize the output counting rate, a simple algorithm was employed for pulse height analysis. Moreover, an algorithm aiming at the real-time pulse pile-up deconvolution was implemented. The system was tested using a NaI(Tl) detector in comparison with a traditional analogue and commercial digital systems for a variety of count rates. The performance of the prototype system was consistently superior to the analogue and the commercial digital systems up to the input count rate of 61 kcps while was slightly inferior to the commercial digital system but still superior to the analogue system in the higher input rates. Considering overall cost, size and flexibility, this custom made multi-input digital signal processing system (MMI-DSP) was the best reliable choice for the purpose of the 2D microdosimetric data collection, or for any measurement in which simultaneous multi-data collection is required.

Sensitivity analysis of complex models: Coping with dynamic and static inputs

International Nuclear Information System (INIS)

Anstett-Collin, F.; Goffart, J.; Mara, T.; Denis-Vidal, L.

2015-01-01

In this paper, we address the issue of conducting a sensitivity analysis of complex models with both static and dynamic uncertain inputs. While several approaches have been proposed to compute the sensitivity indices of the static inputs (i.e. parameters), the one of the dynamic inputs (i.e. stochastic fields) have been rarely addressed. For this purpose, we first treat each dynamic as a Gaussian process. Then, the truncated Karhunen–Loève expansion of each dynamic input is performed. Such an expansion allows to generate independent Gaussian processes from a finite number of independent random variables. Given that a dynamic input is represented by a finite number of random variables, its variance-based sensitivity index is defined by the sensitivity index of this group of variables. Besides, an efficient sampling-based strategy is described to estimate the first-order indices of all the input factors by only using two input samples. The approach is applied to a building energy model, in order to assess the impact of the uncertainties of the material properties (static inputs) and the weather data (dynamic inputs) on the energy performance of a real low energy consumption house. - Highlights: • Sensitivity analysis of models with uncertain static and dynamic inputs is performed. • Karhunen–Loève (KL) decomposition of the spatio/temporal inputs is performed. • The influence of the dynamic inputs is studied through the modes of the KL expansion. • The proposed approach is applied to a building energy model. • Impact of weather data and material properties on performance of real house is given

Pilot study of a novel tool for input-free automated identification of transition zone prostate tumors using T2- and diffusion-weighted signal and textural features.

Science.gov (United States)

Stember, Joseph N; Deng, Fang-Ming; Taneja, Samir S; Rosenkrantz, Andrew B

2014-08-01

To present results of a pilot study to develop software that identifies regions suspicious for prostate transition zone (TZ) tumor, free of user input. Eight patients with TZ tumors were used to develop the model by training a Naïve Bayes classifier to detect tumors based on selection of most accurate predictors among various signal and textural features on T2-weighted imaging (T2WI) and apparent diffusion coefficient (ADC) maps. Features tested as inputs were: average signal, signal standard deviation, energy, contrast, correlation, homogeneity and entropy (all defined on T2WI); and average ADC. A forward selection scheme was used on the remaining 20% of training set supervoxels to identify important inputs. The trained model was tested on a different set of ten patients, half with TZ tumors. In training cases, the software tiled the TZ with 4 × 4-voxel "supervoxels," 80% of which were used to train the classifier. Each of 100 iterations selected T2WI energy and average ADC, which therefore were deemed the optimal model input. The two-feature model was applied blindly to the separate set of test patients, again without operator input of suspicious foci. The software correctly predicted presence or absence of TZ tumor in all test patients. Furthermore, locations of predicted tumors corresponded spatially with locations of biopsies that had confirmed their presence. Preliminary findings suggest that this tool has potential to accurately predict TZ tumor presence and location, without operator input. © 2013 Wiley Periodicals, Inc.

ECOS - analysis of sensitivity to database and input parameters

International Nuclear Information System (INIS)

Sumerling, T.J.; Jones, C.H.

1986-06-01

The sensitivity of doses calculated by the generic biosphere code ECOS to parameter changes has been investigated by the authors for the Department of the Environment as part of its radioactive waste management research programme. The sensitivity of results to radionuclide dependent parameters has been tested by specifying reasonable parameter ranges and performing code runs for best estimate, upper-bound and lower-bound parameter values. The work indicates that doses are most sensitive to scenario parameters: geosphere input fractions, area of contaminated land, land use and diet, flux of contaminated waters and water use. Recommendations are made based on the results of sensitivity. (author)

Molecular structure input on the web

Directory of Open Access Journals (Sweden)

Ertl Peter

2010-02-01

Full Text Available Abstract A molecule editor, that is program for input and editing of molecules, is an indispensable part of every cheminformatics or molecular processing system. This review focuses on a special type of molecule editors, namely those that are used for molecule structure input on the web. Scientific computing is now moving more and more in the direction of web services and cloud computing, with servers scattered all around the Internet. Thus a web browser has become the universal scientific user interface, and a tool to edit molecules directly within the web browser is essential. The review covers a history of web-based structure input, starting with simple text entry boxes and early molecule editors based on clickable maps, before moving to the current situation dominated by Java applets. One typical example - the popular JME Molecule Editor - will be described in more detail. Modern Ajax server-side molecule editors are also presented. And finally, the possible future direction of web-based molecule editing, based on technologies like JavaScript and Flash, is discussed.

Artificial neural network modelling of biological oxygen demand in rivers at the national level with input selection based on Monte Carlo simulations.

Science.gov (United States)

Šiljić, Aleksandra; Antanasijević, Davor; Perić-Grujić, Aleksandra; Ristić, Mirjana; Pocajt, Viktor

2015-03-01

Biological oxygen demand (BOD) is the most significant water quality parameter and indicates water pollution with respect to the present biodegradable organic matter content. European countries are therefore obliged to report annual BOD values to Eurostat; however, BOD data at the national level is only available for 28 of 35 listed European countries for the period prior to 2008, among which 46% of data is missing. This paper describes the development of an artificial neural network model for the forecasting of annual BOD values at the national level, using widely available sustainability and economical/industrial parameters as inputs. The initial general regression neural network (GRNN) model was trained, validated and tested utilizing 20 inputs. The number of inputs was reduced to 15 using the Monte Carlo simulation technique as the input selection method. The best results were achieved with the GRNN model utilizing 25% less inputs than the initial model and a comparison with a multiple linear regression model trained and tested using the same input variables using multiple statistical performance indicators confirmed the advantage of the GRNN model. Sensitivity analysis has shown that inputs with the greatest effect on the GRNN model were (in descending order) precipitation, rural population with access to improved water sources, treatment capacity of wastewater treatment plants (urban) and treatment of municipal waste, with the last two having an equal effect. Finally, it was concluded that the developed GRNN model can be useful as a tool to support the decision-making process on sustainable development at a regional, national and international level.

A strategy for integrated low-input potato production

NARCIS (Netherlands)

Vereijken, P.H.; Loon, van C.D.

1991-01-01

Current systems of potato growing use large amounts of pesticides and fertilizers; these inputs are costly and cause environmental problems. In this paper a strategy for integrated low-input potato production is developed with the aim of reducing costs, improving product quality and reducing

Canonical multi-valued input Reed-Muller trees and forms

Science.gov (United States)

Perkowski, M. A.; Johnson, P. D.

1991-01-01

There is recently an increased interest in logic synthesis using EXOR gates. The paper introduces the fundamental concept of Orthogonal Expansion, which generalizes the ring form of the Shannon expansion to the logic with multiple-valued (mv) inputs. Based on this concept we are able to define a family of canonical tree circuits. Such circuits can be considered for binary and multiple-valued input cases. They can be multi-level (trees and DAG's) or flattened to two-level AND-EXOR circuits. Input decoders similar to those used in Sum of Products (SOP) PLA's are used in realizations of multiple-valued input functions. In the case of the binary logic the family of flattened AND-EXOR circuits includes several forms discussed by Davio and Green. For the case of the logic with multiple-valued inputs, the family of the flattened mv AND-EXOR circuits includes three expansions known from literature and two new expansions.

The Input-Output Relationship of the Cholinergic Basal Forebrain

Directory of Open Access Journals (Sweden)

Matthew R. Gielow

2017-02-01

Full Text Available Basal forebrain cholinergic neurons influence cortical state, plasticity, learning, and attention. They collectively innervate the entire cerebral cortex, differentially controlling acetylcholine efflux across different cortical areas and timescales. Such control might be achieved by differential inputs driving separable cholinergic outputs, although no input-output relationship on a brain-wide level has ever been demonstrated. Here, we identify input neurons to cholinergic cells projecting to specific cortical regions by infecting cholinergic axon terminals with a monosynaptically restricted viral tracer. This approach revealed several circuit motifs, such as central amygdala neurons synapsing onto basolateral amygdala-projecting cholinergic neurons or strong somatosensory cortical input to motor cortex-projecting cholinergic neurons. The presence of input cells in the parasympathetic midbrain nuclei contacting frontally projecting cholinergic neurons suggest that the network regulating the inner eye muscles are additionally regulating cortical state via acetylcholine efflux. This dataset enables future circuit-level experiments to identify drivers of known cortical cholinergic functions.

Lysimeter data as input to performance assessment models

International Nuclear Information System (INIS)

McConnell, J.W. Jr.

1998-01-01

The Field Lysimeter Investigations: Low-Level Waste Data Base Development Program is obtaining information on the performance of radioactive waste forms in a disposal environment. Waste forms fabricated using ion-exchange resins from EPICOR-117 prefilters employed in the cleanup of the Three Mile Island (TMI) Nuclear Power Station are being tested to develop a low-level waste data base and to obtain information on survivability of waste forms in a disposal environment. The program includes reviewing radionuclide releases from those waste forms in the first 7 years of sampling and examining the relationship between code input parameters and lysimeter data. Also, lysimeter data are applied to performance assessment source term models, and initial results from use of data in two models are presented

Associations between MMPI-2-RF validity scale scores and extra-test measures of personality and psychopathology.

Science.gov (United States)

Forbey, Johnathan D; Lee, Tayla T C; Ben-Porath, Yossef S; Arbisi, Paul A; Gartland, Diane

2013-08-01

The current study explored associations between two potentially invalidating self-report styles detected by the Validity scales of the Minnesota Multiphasic Personality Inventory-2-Restructured Form (MMPI-2-RF), over-reporting and under-reporting, and scores on the MMPI-2-RF substantive, as well as eight collateral self-report measures administered either at the same time or within 1 to 10 days of MMPI-2-RF administration. Analyses were conducted with data provided by college students, male prisoners, and male psychiatric outpatients from a Veterans Administration facility. Results indicated that if either an over- or under-reporting response style was suggested by the MMPI-2-RF Validity scales, scores on the majority of the MMPI-2-RF substantive scales, as well as a number of collateral measures, were significantly affected in all three groups in the expected directions. Test takers who were identified as potentially engaging in an over- or under-reporting response style by the MMPI-2-RF Validity scales appeared to approach extra-test measures similarly regardless of when these measures were administered in relation to the MMPI-2-RF. Limitations and suggestions for future study are discussed.

Input or intimacy

Directory of Open Access Journals (Sweden)

Judit Navracsics

2014-01-01

Full Text Available According to the critical period hypothesis, the earlier the acquisition of a second language starts, the better. Owing to the plasticity of the brain, up until a certain age a second language can be acquired successfully according to this view. Early second language learners are commonly said to have an advantage over later ones especially in phonetic/phonological acquisition. Native-like pronunciation is said to be most likely to be achieved by young learners. However, there is evidence of accentfree speech in second languages learnt after puberty as well. Occasionally, on the other hand, a nonnative accent may appear even in early second (or third language acquisition. Cross-linguistic influences are natural in multilingual development, and we would expect the dominant language to have an impact on the weaker one(s. The dominant language is usually the one that provides the largest amount of input for the child. But is it always the amount that counts? Perhaps sometimes other factors, such as emotions, ome into play? In this paper, data obtained from an EnglishPersian-Hungarian trilingual pair of siblings (under age 4 and 3 respectively is analyzed, with a special focus on cross-linguistic influences at the phonetic/phonological levels. It will be shown that beyond the amount of input there are more important factors that trigger interference in multilingual development.

Multifunction input-output board for the IBM AT/XT (Lab-Master)

Energy Technology Data Exchange (ETDEWEB)

Pilyar, A V

1996-12-31

Multifunction input-output board for the IBM PC AT/XT is described. It consists of a CMOS analog input multiplexer, programmable amplifier, a fast 12-bit ADC, four 10-bit DAC and two 8-bit digital input-output registers. Specifications of analog input and output are given. 6 refs.

DOG -II input generator program for DOT3.5 code

International Nuclear Information System (INIS)

Hayashi, Katsumi; Handa, Hiroyuki; Yamada, Koubun; Kamogawa, Susumu; Takatsu, Hideyuki; Koizumi, Kouichi; Seki, Yasushi

1992-01-01

DOT3.5 is widely used for radiation transport analysis of fission reactors, fusion experimental facilities and particle accelerators. We developed the input generator program for DOT3.5 code in aim to prepare input data effectively. Formar program DOG was developed and used internally in Hitachi Engineering Company. In this new version DOG-II, limitation for R-Θ geometry was removed. All the input data is created by interactive method in front of color display without using DOT3.5 manual. Also the geometry related input are easily created without calculation of precise curved mesh point. By using DOG-II, reliable input data for DOT3.5 code is obtained easily and quickly

Double input converters for different voltage sources with isolated charger

Directory of Open Access Journals (Sweden)

Chalash Sattayarak

2014-09-01

Full Text Available This paper presents the double input converters for different voltage input sources with isolated charger coils. This research aims to increase the performance of the battery charger circuit. In the circuit, there are the different voltage levels of input source. The operating modes of the switch in the circuit use the microcontroller to control the battery charge and to control discharge mode automatically when the input voltage sources are lost from the system. The experimental result of this research shows better performance for charging at any time period of the switch, while the voltage input sources work together. Therefore, this research can use and develop to battery charger for present or future.

Input shaping control with reentry commands of prescribed duration

Directory of Open Access Journals (Sweden)

Valášek M.

2008-12-01

Full Text Available Control of flexible mechanical structures often deals with the problem of unwanted vibration. The input shaping is a feedforward method based on modification of the input signal so that the output performs the demanded behaviour. The presented approach is based on a finite-time Laplace transform. It leads to no-vibration control signal without any limitations on its time duration because it is not strictly connected to the system resonant frequency. This idea used for synthesis of control input is extended to design of dynamical shaper with reentry property that transform an arbitrary input signal to the signal that cause no vibration. All these theoretical tasks are supported by the results of simulation experiments.

GARFEM input deck description

Energy Technology Data Exchange (ETDEWEB)

Zdunek, A.; Soederberg, M. (Aeronautical Research Inst. of Sweden, Bromma (Sweden))

1989-01-01

The input card deck for the finite element program GARFEM version 3.2 is described in this manual. The program includes, but is not limited to, capabilities to handle the following problems: * Linear bar and beam element structures, * Geometrically non-linear problems (bar and beam), both static and transient dynamic analysis, * Transient response dynamics from a catalog of time varying external forcing function types or input function tables, * Eigenvalue solution (modes and frequencies), * Multi point constraints (MPC) for the modelling of mechanisms and e.g. rigid links. The MPC definition is used only in the geometrically linearized sense, * Beams with disjunct shear axis and neutral axis, * Beams with rigid offset. An interface exist that connects GARFEM with the program GAROS. GAROS is a program for aeroelastic analysis of rotating structures. Since this interface was developed GARFEM now serves as a preprocessor program in place of NASTRAN which was formerly used. Documentation of the methods applied in GARFEM exists but is so far limited to the capacities in existence before the GAROS interface was developed.

Assessing K-5 Teacher Leaders' Mathematical Understanding: What Have the Test Makers and the Test Takers Learned?

Science.gov (United States)

Ellington, Aimee J.; Whitenack, Joy W.; Inge, Vickie L.; Murray, Megan K.; Schneider, Patti J.

2012-01-01

This article describes the design and implementation of an assessment instrument for Numbers and Operations, the first course in a program to train elementary mathematics specialists. We briefly describe the course and its content, and then we elaborate on the process we used to develop the assessment instrument and the corresponding rubric for…

Tell Me How to Do This Thing Called Design! Practical Application of Complexity Theory to Military Operations

Science.gov (United States)

2011-04-08

be required. The military’s fear of subordinates evaluating superiors will have to be gotten over. And calculated risk -takers and innovators will...have to not only be rewarded, but encouraged and promoted to the top. Testing of these task forces at training centers would be akin to Crossfit

Contextualizing Performances: Comparing Performances during TOEFL iBT™ and Real-Life Academic Speaking Activities

Science.gov (United States)

Brooks, Lindsay; Swain, Merrill

2014-01-01

In this study we compare test takers' performance on the Speaking section of the TOEFL iBT™and their performances during their real-life academic studies. Thirty international graduate students from mixed language backgrounds in two different disciplines (Sciences and Social Sciences) responded to two independent and four integrated speaking tasks…

Input Manipulation, Enhancement and Processing: Theoretical Views and Empirical Research

Science.gov (United States)

Benati, Alessandro

2016-01-01

Researchers in the field of instructed second language acquisition have been examining the issue of how learners interact with input by conducting research measuring particular kinds of instructional interventions (input-oriented and meaning-based). These interventions include such things as input flood, textual enhancement and processing…

Risk Management Practices of Multinational and indigenous ...

African Journals Online (AJOL)

Construction projects' high uncertainty rates make them unattractive to non-risk takers. Construction companies are therefore necessarily risk takers, albeit, to varying degrees. This study made an inquiry into the risk management (RM) practices of multinational and indigenous construction companies (MCCs and ICCs, ...

76 FR 70202 - Self-Regulatory Organizations; EDGA Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Science.gov (United States)

2011-11-10

... excessive. The proposed rule change reflects a competitive pricing structure designed to incent market... the proposed maker/taker spread was competitive with other market centers maker/ taker spreads (BATS.... The Exchange also notes that it operates in a highly competitive market in which market participants...

Self-Structured Organizing Single-Input CMAC Control for Robot Manipulator

Directory of Open Access Journals (Sweden)

ThanhQuyen Ngo

2011-09-01

Full Text Available This paper represents a self-structured organizing single-input control system based on differentiable cerebellar model articulation controller (CMAC for an n-link robot manipulator to achieve the high-precision position tracking. In the proposed scheme, the single-input CMAC controller is solely used to control the plant, so the input space dimension of CMAC can be simplified and no conventional controller is needed. The structure of single-input CMAC will also be self-organized; that is, the layers of single-input CMAC will grow or prune systematically and their receptive functions can be automatically adjusted. The online tuning laws of single-input CMAC parameters are derived in gradient-descent learning method and the discrete-type Lyapunov function is applied to determine the learning rates of proposed control system so that the stability of the system can be guaranteed. The simulation results of robot manipulator are provided to verify the effectiveness of the proposed control methodology.

The Economic Impact of Tourism. An Input-Output Analysis

OpenAIRE

Camelia SURUGIU

2009-01-01

The paper presents an Input-Output Analysis for Romania, an important source of information for the investigation of the inter-relations existing among different industries. The Input-Output Analysis is used to determine the role and importance of different economic value added, incomes and employment and it analyses the existing connection in an economy. This paper is focused on tourism and the input-output analysis is finished for the Hotels and Restaurants Sector.

Outsourcing, public Input provision and policy cooperation

OpenAIRE

Aronsson, Thomas; Koskela, Erkki

2009-01-01

This paper concerns public input provision as an instrument for redistribution under international outsourcing by using a model-economy comprising two countries, North and South, where firms in the North may outsource part of their low-skilled labor intensive production to the South. We consider two interrelated issues: (i) the incentives for each country to modify the provision of public input goods in response to international outsourcing, and (ii) whether international outsourcing justifie...

Identification of genotypic variation for nitrogen response in potato (Solanum tuberosum) under low nitrogen input circumstances

NARCIS (Netherlands)

Tiemens-Hulscher, M.; Lammerts Van Bueren, E.; Struik, P.C.

2009-01-01

Nitrogen is an essential nutrient for crop growth. The demand for nitrogen in the potato crop is relatively high. However, in organic farming nitrogen input is rather limited, compared with conventional farming. In this research nine potato varieties were tested at three nitrogen levels. Genotypic

Reducing uncertainty at minimal cost: a method to identify important input parameters and prioritize data collection

NARCIS (Netherlands)

Uwizeye, U.A.; Groen, E.A.; Gerber, P.J.; Schulte, Rogier P.O.; Boer, de I.J.M.

2016-01-01

The study aims to illustrate a method to identify important input parameters that explain most of the output variance ofenvironmental assessment models. The method is tested for the computation of life-cycle nitrogen (N) use efficiencyindicators among mixed dairy production systems in Rwanda. We

Relay testing parametric investigation of seismic fragility

International Nuclear Information System (INIS)

Bandyopadhyay, K.; Hofmayer, C.; Kassir, M.; Pepper, S.

1989-01-01

The seismic capacity of most electrical equipment is governed by malfunction of relays. An evaluation of the existing relay test data base at Brookhaven National Laboratory (BNL) has indicated that the seismic fragility of a relay may depend on various parameters related to the design or the input motion. In particular, the electrical mode, contact state, adjustment, chatter duration acceptance limit, and the frequency and the direction of the vibration input have been considered to influence the relay fragility level. For a particular relay type, the dynamics of its moving parts depends on the exact model number and vintage and hence, these parameters may also influence the fragility level. In order to investigate the effect of most of these parameters on the seismic fragility level, BNL has conducted a relay test program. The testing has been performed at Wyle Laboratories. Establishing the correlation between the single frequency fragility test input and the corresponding multifrequency response spectrum (TRS) is also an objective of this test program. This paper discusses the methodology used for testing and presents a brief summary of important test results. 1 ref., 10 figs

Effects of Phonological Input as a Pre-Listening Activity on Vocabulary Learning and L2 Listening Comprehension Test Performance

Science.gov (United States)

Mihara, Kei

2015-01-01

The purpose of the present study is twofold. The first goal is to examine the effects of phonological input on students' vocabulary learning. The second is to discuss how different pre­-listening activities affect students' second language listening comprehension. The participants were first-­year students at a Japanese university. There were two…

Program for the Generation of MCNP Inputs from State Files of CAREM

International Nuclear Information System (INIS)

Leszczynski, Francisco; Lopasso, Edmundo; Villarino, E

2000-01-01

The objective of this work is the development and tests of detailed input data for the Monte Carlo program MCNP, to be able of model the core of CAREM reactor, with the detail included on the updated models, for having available a calculation system that allow the production of confident results to be compared with results obtained with the system used today for designing the CAREM reactor core (CONDOR-CITVAP).The model includes the possibility of temperature and coolant density, and temperature and numeric densities of fuel.The detail consists of 21 different fuel elements (symmetry 3) and 14 axial zones.Results of comparisons of reactivity and power pick factors are presented, between MCNP and CONDOR-CITVAP.On average, these results show an acceptable agreement for all the compared parameters.It is described, also, the interface CONDOR-CITVAP-MCNP program, that has been developed for generating inputs of materials for MCNP, from outputs of CONDOR and CITVAP, for different reactor states

Ecosystem responses to reduced and oxidised nitrogen inputs in European terrestrial habitats

Energy Technology Data Exchange (ETDEWEB)

Stevens, C.J. [Department of Life Sciences, The Open University, Walton Hall, Milton Keynes, MK7 6AA (United Kingdom); Manning, P. [School of Agriculture Food and Rural Development, Newcastle University, Newcastle upon Tyne, Tyne and Wear, NE1 7RU (United Kingdom); Van den Berg, L.J.L. [Environment Department, University of York, Heslington, York, YO 5DD (United Kingdom); De Graaf, M.C.C. [University of Applied Sciences, HAS Den Bosch, PO BOX 90108, 5200 MA ' s-Hertogenbosch (Netherlands); Wieger Wamelink, G.W. [Alterra, Droevendaalsesteeg 3a, P.O. Box 47, 6700 AA Wageningen (Netherlands); Boxman, A.W.; Vergeer, P.; Lamers, L.P.M. [Department of Aquatic Ecology and Environmental Biology, University of Nijmegen, P.O. Box 9010, NL-6500 GL, Nijmegen (Netherlands); Bleeker, A. [Energy research Centre of the Netherlands, Petten, NH, 1755 ZG (Netherlands); Arroniz-Crespo, M. [Departamento de Biologia Vegetal II, Facultad de Farmacia, Universidad Complutense de Madrid, 28040, Madrid (Spain); Limpens, J. [Nature Conservation and Plant Ecology Group, Wageningen University, Bornsesteeg 69, 6708 PD Wageningen (Netherlands); Bobbink, R. [Ware Research Centre, Radboud University Nijmegen, PO Box 9010, 6500 GL Nijmegen (Netherlands); Dorland, E. [Staatsbosbeheer, PO Box 1300, 3970 BH, Driebergen (Netherlands)

2011-03-15

While it is well established that ecosystems display strong responses to elevated nitrogen deposition, the importance of the ratio between the dominant forms of deposited nitrogen (NHx and NOy) in determining ecosystem response is poorly understood. As large changes in the ratio of oxidised and reduced nitrogen inputs are occurring, this oversight requires attention. One reason for this knowledge gap is that plants experience a different NHx:NOy ratio in soil to that seen in atmospheric deposits because atmospheric inputs are modified by soil transformations, mediated by soil pH. Consequently species of neutral and alkaline habitats are less likely to encounter high NH4+ concentrations than species from acid soils. We suggest that the response of vascular plant species to changing ratios of NHx:NOy deposits will be driven primarily by a combination of soil pH and nitrification rates. Testing this hypothesis requires a combination of experimental and survey work in a range of systems.

Sensory Synergy as Environmental Input Integration

Directory of Open Access Journals (Sweden)

Fady eAlnajjar

2015-01-01

Full Text Available The development of a method to feed proper environmental inputs back to the central nervous system (CNS remains one of the challenges in achieving natural movement when part of the body is replaced with an artificial device. Muscle synergies are widely accepted as a biologically plausible interpretation of the neural dynamics between the CNS and the muscular system. Yet the sensorineural dynamics of environmental feedback to the CNS has not been investigated in detail. In this study, we address this issue by exploring the concept of sensory synergy. In contrast to muscle synergy, we hypothesize that sensory synergy plays an essential role in integrating the overall environmental inputs to provide low-dimensional information to the CNS. We assume that sensor synergy and muscle synergy communicate using these low-dimensional signals. To examine our hypothesis, we conducted posture control experiments involving lateral disturbance with 9 healthy participants. Proprioceptive information represented by the changes on muscle lengths were estimated by using the musculoskeletal model analysis software SIMM. Changes on muscles lengths were then used to compute sensory synergies. The experimental results indicate that the environmental inputs were translated into the two dimensional signals and used to move the upper limb to the desired position immediately after the lateral disturbance. Participants who showed high skill in posture control were found to be likely to have a strong correlation between sensory and muscle signaling as well as high coordination between the utilized sensory synergies. These results suggest the importance of integrating environmental inputs into suitable low-dimensional signals before providing them to the CNS. This mechanism should be essential when designing the prosthesis’ sensory system to make the controller simpler

Sensory synergy as environmental input integration.

Science.gov (United States)

Alnajjar, Fady; Itkonen, Matti; Berenz, Vincent; Tournier, Maxime; Nagai, Chikara; Shimoda, Shingo

2014-01-01

The development of a method to feed proper environmental inputs back to the central nervous system (CNS) remains one of the challenges in achieving natural movement when part of the body is replaced with an artificial device. Muscle synergies are widely accepted as a biologically plausible interpretation of the neural dynamics between the CNS and the muscular system. Yet the sensorineural dynamics of environmental feedback to the CNS has not been investigated in detail. In this study, we address this issue by exploring the concept of sensory synergy. In contrast to muscle synergy, we hypothesize that sensory synergy plays an essential role in integrating the overall environmental inputs to provide low-dimensional information to the CNS. We assume that sensor synergy and muscle synergy communicate using these low-dimensional signals. To examine our hypothesis, we conducted posture control experiments involving lateral disturbance with nine healthy participants. Proprioceptive information represented by the changes on muscle lengths were estimated by using the musculoskeletal model analysis software SIMM. Changes on muscles lengths were then used to compute sensory synergies. The experimental results indicate that the environmental inputs were translated into the two dimensional signals and used to move the upper limb to the desired position immediately after the lateral disturbance. Participants who showed high skill in posture control were found to be likely to have a strong correlation between sensory and muscle signaling as well as high coordination between the utilized sensory synergies. These results suggest the importance of integrating environmental inputs into suitable low-dimensional signals before providing them to the CNS. This mechanism should be essential when designing the prosthesis' sensory system to make the controller simpler.

Are doctors risk takers?

Directory of Open Access Journals (Sweden)

Pikkel D

2016-06-01

Full Text Available Dvora Pikkel,1 Yael Sara Pikkel Igal,2 Adi Sharabi-Nov,3,4 Joseph Pikkel2,51Risk Management and Patient Safety Unit, Assuta Medical Center, Ramat Hahayal, Tel Aviv, 2Faculty of Medicine, Bar-Ilan University, 3Research Wing, Ziv Medical Center, Safed, 4Tel-Hai Academic College, Upper Galilee, 5Department of Ophthalmology, Ziv Medical Center, Safed, Israel Objective: Risk taking affects human behavior in general and decisions in medicine in particular. We used game theory to assess physicians' risk-taking tendencies. Methods: Physicians were recruited to the study by advertisement. It was explained that they would receive a sum of money for correct prediction of the flipping of a coin. They could try to sell their opportunity to flip the coin for an amount of money they determined. The sum offered by the participants was considered an indicator of risk taking. A demographic questionnaire assessed age, sex, seniority, and area of specialization of the participants. A multivariate analysis assessed associations between risk-taking behavior and, seniority, and specialization. Results: Sixty-two physicians participated, 36 males and 26 females, seniority 1–34 years. Of a possible range of 0–10, the mean score for risk taking was 5.5 – just slightly more than indifference. Negative correlations were found between risk taking and seniority, and between risk taking and age (β=–0.45, P<0.001 for both. Surgeons and anesthesiologists showed greater risk taking than did other physicians (β=0.69, P<0.05; and females less than males, though the latter correlation was not statistically significant. Conclusion: Understanding the tendency of physicians to risk taking may elucidate their decision-making processes and contribute to understanding of causes of adverse events and to the education of physicians. Keywords: risk taking, game theory, seniority, surgeons, anesthesiologists

76 FR 47283 - Self-Regulatory Organizations; EDGA Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Science.gov (United States)

2011-08-04

... excessive. The proposed rule change reflects a competitive pricing structure designed to incent market... maker/taker spread is competitive with other market centers maker/taker spreads (BATS BZX Exchange, $0... Exchange also notes that it operates in a highly competitive market in which market participants can...

A parallel input composite transimpedance amplifier

Science.gov (United States)

Kim, D. J.; Kim, C.

2018-01-01

A new approach to high performance current to voltage preamplifier design is presented. The design using multiple operational amplifiers (op-amps) has a parasitic capacitance compensation network and a composite amplifier topology for fast, precision, and low noise performance. The input stage consisting of a parallel linked JFET op-amps and a high-speed bipolar junction transistor (BJT) gain stage driving the output in the composite amplifier topology, cooperating with the capacitance compensation feedback network, ensures wide bandwidth stability in the presence of input capacitance above 40 nF. The design is ideal for any two-probe measurement, including high impedance transport and scanning tunneling microscopy measurements.

Voltage, Temperature, Frequency Margin Test Report

DEFF Research Database (Denmark)

Denver, Troelz

1999-01-01

The purpose of the tests is to establish the camera functionality when it is exposed to an extreme environment for prolonged periods, thus simulating the end of life performance. This environment covers temperature, input clock frequency and supply voltage variation......The purpose of the tests is to establish the camera functionality when it is exposed to an extreme environment for prolonged periods, thus simulating the end of life performance. This environment covers temperature, input clock frequency and supply voltage variation...

Integrate-and-fire vs Poisson models of LGN input to V1 cortex: noisier inputs reduce orientation selectivity.

Science.gov (United States)

Lin, I-Chun; Xing, Dajun; Shapley, Robert

2012-12-01

One of the reasons the visual cortex has attracted the interest of computational neuroscience is that it has well-defined inputs. The lateral geniculate nucleus (LGN) of the thalamus is the source of visual signals to the primary visual cortex (V1). Most large-scale cortical network models approximate the spike trains of LGN neurons as simple Poisson point processes. However, many studies have shown that neurons in the early visual pathway are capable of spiking with high temporal precision and their discharges are not Poisson-like. To gain an understanding of how response variability in the LGN influences the behavior of V1, we study response properties of model V1 neurons that receive purely feedforward inputs from LGN cells modeled either as noisy leaky integrate-and-fire (NLIF) neurons or as inhomogeneous Poisson processes. We first demonstrate that the NLIF model is capable of reproducing many experimentally observed statistical properties of LGN neurons. Then we show that a V1 model in which the LGN input to a V1 neuron is modeled as a group of NLIF neurons produces higher orientation selectivity than the one with Poisson LGN input. The second result implies that statistical characteristics of LGN spike trains are important for V1's function. We conclude that physiologically motivated models of V1 need to include more realistic LGN spike trains that are less noisy than inhomogeneous Poisson processes.

Remote Testing of Timed Specifications

DEFF Research Database (Denmark)

David, Alexandre; Larsen, Kim Guldstrand; Mikucionis, Marius

2013-01-01

We present a study and a testing framework on black box remote testing of real-time systems using UPPAAL TIGA. One of the essential challenges of remote testing is the communication latency between the Tester and the System Under Test (IUT) that may lead to interleaving of inputs and outputs. Thi...

The Relationship among Health Education Systems, Inc. Progression and Exit Examination Scores, Day or Evening Enrollment, Final Grade Point Average and NCLEX-RN® Success in Associate Degree Nursing Students

Science.gov (United States)

Barnwell-Sanders, Pamela

2015-01-01

Graduates of associate degree (AD) nursing programs form the largest segment of first-time National Council Licensure Examination for Registered Nurses (NCLEX-RN®) test takers, yet also experience the highest rate of NCLEX-RN® failures. NCLEX-RN® failure delays entry into the profession, adding an emotional and financial toll to the unsuccessful…

In Their Own Voices: Helping Artistically Gifted and Talented Students Succeed Academically

Science.gov (United States)

Carroll, Karen Lee

2008-01-01

Art education is an interdisciplinary field in the sense that it requires a mix of studio practice with theory and academic-style learning. Teachers teach philosophy and theory drawn from psychology, social sciences, history, and the humanities. Helping students be successful readers, writers, speakers, and test-takers are goals shared with those…

The Effectiveness of Song Technique in Teaching Paper Based TOEFL (PBT)'s Listening Comprehension Section

Science.gov (United States)

Kuswoyo, Heri

2013-01-01

Among three sections that follow the Paper-Based TOEFL (PBT), many test takers find listening comprehension section is the most difficult. Thus, in this research the researcher aims to explore how students learn PBT's listening comprehension section effectively through song technique. This sounds like a more interesting and engaging way to learn…

Preparing MSW Students for Social Work Licensure: A Curricular Case Example

Science.gov (United States)

Miller, J. Jay; Grise-Owens, Erlene; Escobar-Ratliff, Laura

2015-01-01

Licensing has been a dynamic tension for the social work profession for many years, specifically in social work education. Increasingly, social work programs are using factors related to social work licensing (pass rates, number of test takers, etc.) as an indicator of programmatic success. Yet few, if any, published papers examine curricular…

The Devil Is in the Details: Evidence from the GED on the Role of Examination System Details in Determining Who Passes. NCSALL Reports #16.

Science.gov (United States)

Tyler, John H.; Murnane, Richard J.; Willett, John B.

A study used data from a long-standing examination system, the General Educational Development (GED) certificate, to illustrate that the details of examination systems have marked impacts on the number of test takers who obtain the desired credential and on the racial/ethnic composition of passers. Data provided by the Florida Department of…

Usability Improvement for Data Input into the Fatigue Avoidance Scheduling Tool (FAST)

National Research Council Canada - National Science Library

Miller, James C

2005-01-01

...) data input mode than using the graphic schedule input mode. The Grid input mode provided both a statistically and an operationally significant reduction in data input time, compared to the Graphic mode for both novice...

Constituency Input into Budget Management.

Science.gov (United States)

Miller, Norman E.

1995-01-01

Presents techniques for ensuring constituency involvement in district- and site-level budget management. Outlines four models for securing constituent input and focuses on strategies to orchestrate the more complex model for staff and community participation. Two figures are included. (LMI)

Development of MIDAS/SMR Input Deck for SMART

International Nuclear Information System (INIS)

Cho, S. W.; Oh, H. K.; Lee, J. M.; Lee, J. H.; Yoo, K. J.; Kwun, S. K.; Hur, H.

2010-01-01

The objective of this study is to develop MIDAS/SMR code basic input deck for the severe accidents by simulating the steady state for the SMART plant. SMART plant is an integrated reactor developed by KAERI. For the assessment of reactor safety and severe accident management strategy, it is necessary to simulate severe accidents using the MIDAS/SMR code which is being developed by KAERI. The input deck of the MIDAS/SMR code for the SMART plant is prepared to simulate severe accident sequences for the users who are not familiar with the code. A steady state is obtained and the results are compared with design values. The input deck will be improved through the simulation of the DBAs and severe accidents. The base input deck of the MIDAS/SMR code can be used to simulate severe accident scenarios after improvement. Source terms and hydrogen generation can be analyzed through the simulation of the severe accident. The information gained from analyses of severe accidents is expected to be helpful to develop the severe accident management strategy

Learning Complex Grammar in the Virtual Classroom: A Comparison of Processing Instruction, Structured Input, Computerized Visual Input Enhancement, and Traditional Instruction

Science.gov (United States)

Russell, Victoria

2012-01-01

This study investigated the effects of processing instruction (PI) and structured input (SI) on the acquisition of the subjunctive in adjectival clauses by 92 second-semester distance learners of Spanish. Computerized visual input enhancement (VIE) was combined with PI and SI in an attempt to increase the salience of the targeted grammatical form…

The Effect of Comprehensible Input and Comprehensible Output on the Accuracy and Complexity of Iranian EFL Learners’ Oral Speech

Directory of Open Access Journals (Sweden)

omid tabatabaie

2009-10-01

Full Text Available This study aimed at investigating the relative impact of comprehensible input and comprehensible output on the development of grammatical accuracy and syntactic complexity of Iranian EFL learners’ oral production. Participants were 60 female EFL learners selected from a whole population pool of 80 based on the standard test of IELTS. To investigate the research questions, the participants were randomly divided into three groups: Input group, output group, and control group. The study involved two phases: the pre-task phase, and the main-task phase. During the pre-task phase, the input group received comprehensible input. In the same phase, the output group was pushed to be engaged in comprehensible output production. The control group neither received input, nor was engaged in output production. In the main-task phase, all subjects performed monologues that were separately recorded, and later transcribed and coded in terms of accuracy and complexity through Bygate's (2001 standard coding system and finally scored. The statistical analysis of the results revealed that while the output group outperformed the input group in grammatical accuracy, the input group proved to be more rigorous and influential in developing speech complexity. The study supports Swain’s (1985 claim that there are roles for comprehensible output that are different from and independent of comprehensible input, and Skehan & Foster's (2001 theory regarding human beings’ limited attentional capacities that can be devoted to one aspect of oral speech at the expense of the other. Generally, it is implied that the most effective way for improving oral speech, based on the literature and the results obtained from this study, is an eclectic approach which conflates both comprehensible input and comprehensible output.

A novel input-parasitic compensation technique for a nanopore-based CMOS DNA detection sensor

Science.gov (United States)

Kim, Jungsuk

2016-12-01

This paper presents a novel input-parasitic compensation (IPC) technique for a nanopore-based complementary metal-oxide-semiconductor (CMOS) DNA detection sensor. A resistive-feedback transimpedance amplifier is typically adopted as the headstage of a DNA detection sensor to amplify the minute ionic currents generated from a nanopore and convert them to a readable voltage range for digitization. But, parasitic capacitances arising from the headstage input and the nanopore often cause headstage saturation during nanopore sensing, thereby resulting in significant DNA data loss. To compensate for the unwanted saturation, in this work, we propose an area-efficient and automated IPC technique, customized for a low-noise DNA detection sensor, fabricated using a 0.35- μm CMOS process; we demonstrated this prototype in a benchtop test using an α-hemolysin ( α-HL) protein nanopore.

Discrete Input Signaling for MISO Visible Light Communication Channels

KAUST Repository

Arfaoui, Mohamed Amine; Rezki, Zouheir; Ghrayeb, Ali; Alouini, Mohamed-Slim

2017-01-01

In this paper, we study the achievable secrecy rate of visible light communication (VLC) links for discrete input distributions. We consider single user single eavesdropper multiple-input single-output (MISO) links. In addition, both beamforming

Pseudo-BINPUT, a free formal input package for Fortran programmes

International Nuclear Information System (INIS)

Gubbins, M.E.

1977-11-01

Pseudo - BINPUT is an input package for reading free format data in codeword control in a FORTRAN programme. To a large degree it mimics in function the Winfrith Subroutine Library routine BINPUT. By using calls of the data input package DECIN to mimic the input routine BINPUT, Pseudo - BINPUT combines some of the advantages of both systems. (U.K.)

Distinctiveness and Bidirectional Effects in Input Enhancement for Vocabulary Learning

Science.gov (United States)

Barcroft, Joe

2003-01-01

This study examined input enhancement and second language (L2) vocabulary learning while exploring the role of "distinctiveness," the degree to which an item in the input diverges from the form in which other items in the input are presented, with regard to the nature and direction of the effects of enhancement. In this study,…

Input-variable sensitivity assessment for sediment transport relations

Science.gov (United States)

Fernández, Roberto; Garcia, Marcelo H.

2017-09-01

A methodology to assess input-variable sensitivity for sediment transport relations is presented. The Mean Value First Order Second Moment Method (MVFOSM) is applied to two bed load transport equations showing that it may be used to rank all input variables in terms of how their specific variance affects the overall variance of the sediment transport estimation. In sites where data are scarce or nonexistent, the results obtained may be used to (i) determine what variables would have the largest impact when estimating sediment loads in the absence of field observations and (ii) design field campaigns to specifically measure those variables for which a given transport equation is most sensitive; in sites where data are readily available, the results would allow quantifying the effect that the variance associated with each input variable has on the variance of the sediment transport estimates. An application of the method to two transport relations using data from a tropical mountain river in Costa Rica is implemented to exemplify the potential of the method in places where input data are limited. Results are compared against Monte Carlo simulations to assess the reliability of the method and validate its results. For both of the sediment transport relations used in the sensitivity analysis, accurate knowledge of sediment size was found to have more impact on sediment transport predictions than precise knowledge of other input variables such as channel slope and flow discharge.

Effect of heat input on the microstructure and mechanical properties of gas tungsten arc welded AISI 304 stainless steel joints

International Nuclear Information System (INIS)

Kumar, Subodh; Shahi, A.S.

2011-01-01

Highlights: → Welding procedure is established for welding 6 mm thick AISI 304 using GTAW process. → Mechanical properties of the weld joints are influenced strongly by the heat input. → Highest tensile strength of 657.32 MPa is achieved by joints using low heat input. → Welding parameters affect heat input and hence microstructure of weld joints. → Extent of grain coarsening in the HAZ increases with increase in the heat input. -- Abstract: Influence of heat input on the microstructure and mechanical properties of gas tungsten arc welded 304 stainless steel (SS) joints was studied. Three heat input combinations designated as low heat (2.563 kJ/mm), medium heat (2.784 kJ/mm) and high heat (3.017 kJ/mm) were selected from the operating window of the gas tungsten arc welding process (GTAW) and weld joints made using these combinations were subjected to microstructural evaluations and tensile testing so as to analyze the effect of thermal arc energy on the microstructure and mechanical properties of these joints. The results of this investigation indicate that the joints made using low heat input exhibited higher ultimate tensile strength (UTS) than those welded with medium and high heat input. Significant grain coarsening was observed in the heat affected zone (HAZ) of all the joints and it was found that the extent of grain coarsening in the heat affected zone increased with increase in the heat input. For the joints investigated in this study it was also found that average dendrite length and inter-dendritic spacing in the weld zone increases with increase in the heat input which is the main reason for the observable changes in the tensile properties of the weld joints welded with different arc energy inputs.

Input measurements in reprocessing plants

International Nuclear Information System (INIS)

Trincherini, P.R.; Facchetti, S.

1980-01-01

The aim of this work is to give a review of the methods and the problems encountered in measurements in 'input accountability tanks' of irradiated fuel treatment plants. This study was prompted by the conviction that more and more precise techniques and methods should be at the service of safeguards organizations and that ever greater efforts should be directed towards promoting knowledge of them among operators and all those general area of interest includes the nuclear fuel cycle. The overall intent is to show the necessity of selecting methods which produce measurements which are not only more precise but are absolutely reliable both for routine plant operation and for safety checks in the input area. A description and a critical evaluation of the most common physical and chemical methods are provided, together with an estimate of the precision and accuracy obtained in real operating conditions

Conceptual Design of GRIG (GUI Based RETRAN Input Generator)

International Nuclear Information System (INIS)

Lee, Gyung Jin; Hwang, Su Hyun; Hong, Soon Joon; Lee, Byung Chul; Jang, Chan Su; Um, Kil Sup

2007-01-01

For the development of high performance methodology using advanced transient analysis code, it is essential to generate the basic input of transient analysis code by rigorous QA procedures. There are various types of operating NPPs (Nuclear Power Plants) in Korea such as Westinghouse plants, KSNP(Korea Standard Nuclear Power Plant), APR1400 (Advance Power Reactor), etc. So there are some difficulties to generate and manage systematically the input of transient analysis code reflecting the inherent characteristics of various types of NPPs. To minimize the user faults and investment man power and to generate effectively and accurately the basic inputs of transient analysis code for all domestic NPPs, it is needed to develop the program that can automatically generate the basic input, which can be directly applied to the transient analysis, from the NPP design material. ViRRE (Visual RETRAN Running Environment) developed by KEPCO (Korea Electric Power Corporation) and KAERI (Korea Atomic Energy Research Institute) provides convenient working environment for Kori Unit 1/2. ViRRE shows the calculated results through on-line display but its capability is limited on the convenient execution of RETRAN. So it can not be used as input generator. ViSA (Visual System Analyzer) developed by KAERI is a NPA (Nuclear Plant Analyzer) using RETRAN and MARS code as thermal-hydraulic engine. ViSA contains both pre-processing and post-processing functions. In the pre-processing, only the trip data cards and boundary conditions can be changed through GUI mode based on pre-prepared text-input, so the capability of input generation is very limited. SNAP (Symbolic Nuclear Analysis Package) developed by Applied Programming Technology, Inc. and NRC (Nuclear Regulatory Commission) provides efficient working environment for the use of nuclear safety analysis codes such as RELAP5 and TRAC-M codes. SNAP covers wide aspects of thermal-hydraulic analysis from model creation through data analysis

Global sensitivity analysis of computer models with functional inputs

International Nuclear Information System (INIS)

Iooss, Bertrand; Ribatet, Mathieu

2009-01-01

Global sensitivity analysis is used to quantify the influence of uncertain model inputs on the response variability of a numerical model. The common quantitative methods are appropriate with computer codes having scalar model inputs. This paper aims at illustrating different variance-based sensitivity analysis techniques, based on the so-called Sobol's indices, when some model inputs are functional, such as stochastic processes or random spatial fields. In this work, we focus on large cpu time computer codes which need a preliminary metamodeling step before performing the sensitivity analysis. We propose the use of the joint modeling approach, i.e., modeling simultaneously the mean and the dispersion of the code outputs using two interlinked generalized linear models (GLMs) or generalized additive models (GAMs). The 'mean model' allows to estimate the sensitivity indices of each scalar model inputs, while the 'dispersion model' allows to derive the total sensitivity index of the functional model inputs. The proposed approach is compared to some classical sensitivity analysis methodologies on an analytical function. Lastly, the new methodology is applied to an industrial computer code that simulates the nuclear fuel irradiation.

Learning Arm/Hand Coordination with an Altered Visual Input

Directory of Open Access Journals (Sweden)

Simona Denisia Iftime Nielsen

2010-01-01

Full Text Available The focus of this study was to test a novel tool for the analysis of motor coordination with an altered visual input. The altered visual input was created using special glasses that presented the view as recorded by a video camera placed at various positions around the subject. The camera was positioned at a frontal (F, lateral (L, or top (T position with respect to the subject. We studied the differences between the arm-end (wrist trajectories while grasping an object between altered vision (F, L, and T conditions and normal vision (N in ten subjects. The outcome measures from the analysis were the trajectory errors, the movement parameters, and the time of execution. We found substantial trajectory errors and an increased execution time at the baseline of the study. We also found that trajectory errors decreased in all conditions after three days of practice with the altered vision in the F condition only for 20 minutes per day, suggesting that recalibration of the visual systems occurred relatively quickly. These results indicate that this recalibration occurs via movement training in an altered condition. The results also suggest that recalibration is more difficult to achieve for altered vision in the F and L conditions compared to the T condition. This study has direct implications on the design of new rehabilitation systems.

Optimally decoding the input rate from an observation of the interspike intervals

Energy Technology Data Exchange (ETDEWEB)

Feng Jianfeng [COGS, University of Sussex at Brighton (United Kingdom) and Computational Neuroscience Laboratory, Babraham Institute, Cambridge (United Kingdom)]. E-mail: jf218@cam.ac.uk

2001-09-21

A neuron extensively receives both inhibitory and excitatory inputs. What is the ratio r between these two types of input so that the neuron can most accurately read out input information (rate)? We explore the issue in this paper provided that the neuron is an ideal observer - decoding the input information with the attainment of the Cramer-Rao inequality bound. It is found that, in general, adding certain amounts of inhibitory inputs to a neuron improves its capability of accurately decoding the input information. By calculating the Fisher information of an integrate-and-fire neuron, we determine the optimal ratio r for decoding the input information from an observation of the efferent interspike intervals. Surprisingly, the Fisher information can be zero for certain values of the ratio, seemingly implying that it is impossible to read out the encoded information at these values. By analysing the maximum likelihood estimate of the input information, it is concluded that the input information is in fact most easily estimated at the points where the Fisher information vanishes. (author)

Efficient round-robin multicast scheduling for input-queued switches

DEFF Research Database (Denmark)

Rasmussen, Anders; Yu, Hao; Ruepp, Sarah Renée

2014-01-01

The input-queued (IQ) switch architecture is favoured for designing multicast high-speed switches because of its scalability and low implementation complexity. However, using the first-in-first-out (FIFO) queueing discipline at each input of the switch may cause the head-of-line (HOL) blocking...... problem. Using a separate queue for each output port at an input to reduce the HOL blocking, that is, the virtual output queuing discipline, increases the implementation complexity, which limits the scalability. Given the increasing link speed and network capacity, a low-complexity yet efficient multicast...... by means of queue look-ahead. Simulation results demonstrate that this FIFO-based IQ multicast architecture is able to achieve significant improvements in terms of multicast latency requirements by searching through a small number of cells beyond the HOL cells in the input queues. Furthermore, hardware...

Barrier island forest ecosystem: role of meteorologic nutrient inputs.

Science.gov (United States)

Art, H W; Bormann, F H; Voigt, G K; Woodwell, G M

1974-04-05

The Sunken Forest, located on Fire Island, a barrier island in the Atlantic Ocean off Long Island, New York, is an ecosystem in which most of the basic cation input is in the form of salt spray. This meteorologic input is sufficient to compensate for the lack of certain nutrients in the highly weathered sandy soils. In other ecosystems these nutrients are generally supplied by weathering of soil particles. The compensatory effect of meteorologic input allows for primary production rates in the Sunken Forest similar to those of inland temperate forests.

Jointness through vessel capacity input in a multispecies fishery

DEFF Research Database (Denmark)

Hansen, Lars Gårn; Jensen, Carsten Lynge

2014-01-01

capacity. We develop a fixed but allocatable input model of purse seine fisheries capturing this particular type of jointness. We estimate the model for the Norwegian purse seine fishery and find that it is characterized by nonjointness, while estimations for this fishery using the standard models imply...... are typically modeled as either independent single species fisheries or using standard multispecies functional forms characterized by jointness in inputs. We argue that production of each species is essentially independent but that jointness may be caused by competition for fixed but allocable input of vessel...

Micro-Level Management of Agricultural Inputs: Emerging Approaches

Directory of Open Access Journals (Sweden)

Jonathan Weekley

2012-12-01

Full Text Available Through the development of superior plant varieties that benefit from high agrochemical inputs and irrigation, the agricultural Green Revolution has doubled crop yields, yet introduced unintended impacts on environment. An expected 50% growth in world population during the 21st century demands novel integration of advanced technologies and low-input production systems based on soil and plant biology, targeting precision delivery of inputs synchronized with growth stages of crop plants. Further, successful systems will integrate subsurface water, air and nutrient delivery, real-time soil parameter data and computer-based decision-making to mitigate plant stress and actively manipulate microbial rhizosphere communities that stimulate productivity. Such an approach will ensure food security and mitigate impacts of climate change.

Incorporating uncertainty in RADTRAN 6.0 input files.

Energy Technology Data Exchange (ETDEWEB)

Dennis, Matthew L.; Weiner, Ruth F.; Heames, Terence John (Alion Science and Technology)

2010-02-01

Uncertainty may be introduced into RADTRAN analyses by distributing input parameters. The MELCOR Uncertainty Engine (Gauntt and Erickson, 2004) has been adapted for use in RADTRAN to determine the parameter shape and minimum and maximum of the distribution, to sample on the distribution, and to create an appropriate RADTRAN batch file. Coupling input parameters is not possible in this initial application. It is recommended that the analyst be very familiar with RADTRAN and able to edit or create a RADTRAN input file using a text editor before implementing the RADTRAN Uncertainty Analysis Module. Installation of the MELCOR Uncertainty Engine is required for incorporation of uncertainty into RADTRAN. Gauntt and Erickson (2004) provides installation instructions as well as a description and user guide for the uncertainty engine.

Effects of background music on concentration of workers.

Science.gov (United States)

Huang, Rong-Hwa; Shih, Yi-Nuo

2011-01-01

Background music is a common element in daily living and the workplace. Determination of whether background music affects human work concentration is a relevant concern. Studies have found background music influences human behavior, and this study attempts to understand how background music and listener fondness for types of music affects worker concentration. This study analyzes how different types of background music--and how listeners' degree of preference for the background music--can affect listener concentration in attention testing through Randomized Controlled Trial (RCT). Data were collected from 89 workers. The participants ranged in age between 19 and 28 years old, with an average age of 24 years old. We conclude background music influenced listener attention. This influence has more to do with listener fondness for the music than with type of music. Compared to situations without background music, the likelihood of background music affecting test-taker attention performance is likely to increase with the degree to which the test-taker likes or dislikes the music. It is important not to select music that workers strongly like or dislike when making a selection of background music to avoid negatively affecting worker concentration.

Conceptualizing, Understanding, and Predicting Responsible Decisions and Quality Input

Science.gov (United States)

Wall, N.; PytlikZillig, L. M.

2012-12-01

In areas such as climate change, where uncertainty is high, it is arguably less difficult to tell when efforts have resulted in changes in knowledge, than when those efforts have resulted in responsible decisions. What is a responsible decision? More broadly, when it comes to citizen input, what is "high quality" input? And most importantly, how are responsible decisions and quality input enhanced? The aim of this paper is to contribute to the understanding of the different dimensions of "responsible" or "quality" public input and citizen decisions by comparing and contrasting the different predictors of those different dimensions. We first present different possibilities for defining, operationalizing and assessing responsible or high quality decisions. For example, responsible decisions or quality input might be defined as using specific content (e.g., using climate change information in decisions appropriately), as using specific processes (e.g., investing time and effort in learning about and discussing the issues prior to making decisions), or on the basis of some judgment of the decision or input itself (e.g., judgments of the rationale provided for the decisions, or number of issues considered when giving input). Second, we present results from our work engaging people with science policy topics, and the different ways that we have tried to define these two constructs. In the area of climate change specifically, we describe the development of a short survey that assesses exposure to climate information, knowledge of and attitudes toward climate change, and use of climate information in one's decisions. Specifically, the short survey was developed based on a review of common surveys of climate change related knowledge, attitudes, and behaviors, and extensive piloting and cognitive interviews. Next, we analyze more than 200 responses to that survey (data collection is currently ongoing and will be complete after the AGU deadline), and report the predictors of

Recognizing and coping with our own prejudices: Fighting liberal bias without conservative input.

Science.gov (United States)

Baumeister, Roy F

2015-01-01

This commentary summarizes my struggle to overcome liberal bias without conservative input. I generally assume I am biased and constantly try to build a good-quality argument for the opposite view. Trying to dispense with one's liberal values can help, if one is willing. Frequent self-tests help. Liberal biases include race, gender, and poverty, but also dislike of business corporations and even Western civilization. Feminism is the single strongest and most powerful bias.

Characterization of memory states of the Preisach operator with stochastic inputs

International Nuclear Information System (INIS)

Amann, A.; Brokate, M.; McCarthy, S.; Rachinskii, D.; Temnov, G.

2012-01-01

The Preisach operator with inputs defined by a Markov process x t is considered. The question we address is: what is the distribution of the random memory state of the Preisach operator at a given time moment t 0 in the limit r→∞ of infinitely long input history x t , t 0 -r≤t≤t 0 ? In order to answer this question, we introduce a Markov chain (called the memory state Markov chain) where the states are pairs (m k ,M k ) of elements from the monotone sequences of the local minimum input values m k and the local maximum input values M k recorded in the memory state and the index k of the elements plays the role of time. We express the transition probabilities of this Markov chain in terms of the transition probabilities of the input stochastic process and show that the memory state Markov chain and the input process generate the same distribution of the memory states. These results are illustrated by several examples of stochastic inputs such as the Wiener and Bernoulli processes and their mixture (we first discuss a discrete version of these processes and then the continuous time and state setting). The memory state Markov chain is then used to find the distribution of the random number of elements in the memory state sequence. We show that this number has the Poisson distribution for the Wiener and Bernoulli processes inputs. In particular, in the discrete setting, the mean value of the number of elements in the memory state scales as lnN, where N is the number of the input states, while the mean time it takes the input to generate this memory state scales as N 2 for the Wiener process and as N for the Bernoulli process. A similar relationship between the dimension of the memory state vector and the number of iterations in the numerical realization of the input is shown for the mixture of the Wiener and Bernoulli processes, thus confirming that the memory state Markov chain is an efficient tool for generating the distribution of the Preisach operator memory

Characterization of memory states of the Preisach operator with stochastic inputs

Energy Technology Data Exchange (ETDEWEB)

Amann, A. [Department of Applied Mathematics, University College Cork (Ireland); Brokate, M. [Zentrum Mathematik, Technische Universitaet Muenchen (Germany); McCarthy, S. [Department of Applied Mathematics, University College Cork (Ireland); Rachinskii, D., E-mail: d.rachinskii@ucc.ie [Department of Applied Mathematics, University College Cork (Ireland); Temnov, G. [Department of Mathematics, University College Cork (Ireland)

2012-05-01

The Preisach operator with inputs defined by a Markov process x{sup t} is considered. The question we address is: what is the distribution of the random memory state of the Preisach operator at a given time moment t{sub 0} in the limit r{yields}{infinity} of infinitely long input history x{sup t}, t{sub 0}-r{<=}t{<=}t{sub 0}? In order to answer this question, we introduce a Markov chain (called the memory state Markov chain) where the states are pairs (m{sub k},M{sub k}) of elements from the monotone sequences of the local minimum input values m{sub k} and the local maximum input values M{sub k} recorded in the memory state and the index k of the elements plays the role of time. We express the transition probabilities of this Markov chain in terms of the transition probabilities of the input stochastic process and show that the memory state Markov chain and the input process generate the same distribution of the memory states. These results are illustrated by several examples of stochastic inputs such as the Wiener and Bernoulli processes and their mixture (we first discuss a discrete version of these processes and then the continuous time and state setting). The memory state Markov chain is then used to find the distribution of the random number of elements in the memory state sequence. We show that this number has the Poisson distribution for the Wiener and Bernoulli processes inputs. In particular, in the discrete setting, the mean value of the number of elements in the memory state scales as lnN, where N is the number of the input states, while the mean time it takes the input to generate this memory state scales as N{sup 2} for the Wiener process and as N for the Bernoulli process. A similar relationship between the dimension of the memory state vector and the number of iterations in the numerical realization of the input is shown for the mixture of the Wiener and Bernoulli processes, thus confirming that the memory state Markov chain is an efficient tool for

History of the special committee on INIS input preparation

International Nuclear Information System (INIS)

Itabashi, Keizo

2011-06-01

The special committee on INIS input techniques was held 8 times from December 1970 to March 1973. The special committee on INIS input preparation was held 39 times from February 1974 to December 2004. The history of these two committees is described. (author)

Parameter setting and input reduction

NARCIS (Netherlands)

Evers, A.; van Kampen, N.J.|info:eu-repo/dai/nl/126439737

2008-01-01

The language acquisition procedure identifies certain properties of the target grammar before others. The evidence from the input is processed in a stepwise order. Section 1 equates that order and its typical effects with an order of parameter setting. The question is how the acquisition procedure

Lithium inputs to subduction zones

NARCIS (Netherlands)

Bouman, C.; Elliott, T.R.; Vroon, P.Z.

2004-01-01

We have studied the sedimentary and basaltic inputs of lithium to subduction zones. Various sediments from DSDP and ODP drill cores in front of the Mariana, South Sandwich, Banda, East Sunda and Lesser Antilles island arcs have been analysed and show highly variable Li contents and δ

Multifrequency tests in the EBR-II reactor plant

International Nuclear Information System (INIS)

Feldman, E.E.; Mohr, D.; Gross, K.C.

1989-01-01

A series of eight multifrequency tests was conducted on the Experimental Breeder Reactor II. In half of the tests a control rod was oscillated and in the other half the controller input voltage to the intermediate-loop-sodium pump was perturbed. In each test the input disturbance consisted of several superimposed single-frequency sinusoidal harmonics of the same fundamental. The tests are described along with the theoretical and practical aspects of their development and design. Samples of measured frequency responses are also provided for both the reactor and the power plant. 22 refs., 5 figs., 2 tabs

User's guide to input for WRAP: a water reactor analysis package

International Nuclear Information System (INIS)

Gregory, M.V.

1977-06-01

The document describes the input records required to execute the Water Reactor Analysis Package (WRAP) for the analysis of thermal-hydraulic transients in primarily light water reactors. The card input required by RELAP4 has been significantly modified to broaden the code's input processing capabilities: (1) All input is in the form of templated, named records. (2) All components (volumes, junctions, etc.) are named rather than numbered, and system relationships are formed by defining associations between the names. (3) A hierarchical part structure is used which allows collections of components to be described as discrete parts (these parts may then be catalogued for use in a wide range of cases). A sample problem, the small break analysis of the Westinghouse Trojan Plant, is discussed and detailed, step-by-step instructions in setting up an input data base are presented. A master list of all input templates for WRAP is compiled

Shaped input distributions for structural damage localization

DEFF Research Database (Denmark)

Ulriksen, Martin Dalgaard; Bernal, Dionisio; Damkilde, Lars

2018-01-01

localization method is cast that operates on the premise of shaping inputs—whose spatial distribution is fixed—by use of a model, such that these inputs, in one structural subdomain at a time, suppress certain steady-state vibration quantities (depending on the type of damage one seeks to interrogate for......). Accordingly, damage is localized when the vibration signature induced by the shaped inputs in the damaged state corresponds to that in the reference state, hereby implying that the approach does not point directly to damage. Instead, it operates with interrogation based on postulated damage patterns...

Nuclear reaction inputs based on effective interactions

Energy Technology Data Exchange (ETDEWEB)

Hilaire, S.; Peru, S.; Dubray, N.; Dupuis, M.; Bauge, E. [CEA, DAM, DIF, Arpajon (France); Goriely, S. [Universite Libre de Bruxelles, Institut d' Astronomie et d' Astrophysique, CP-226, Brussels (Belgium)

2016-11-15

Extensive nuclear structure studies have been performed for decades using effective interactions as sole input. They have shown a remarkable ability to describe rather accurately many types of nuclear properties. In the early 2000 s, a major effort has been engaged to produce nuclear reaction input data out of the Gogny interaction, in order to challenge its quality also with respect to nuclear reaction observables. The status of this project, well advanced today thanks to the use of modern computers as well as modern nuclear reaction codes, is reviewed and future developments are discussed. (orig.)

Multiple Input - Multiple Output (MIMO) SAR

Data.gov (United States)

National Aeronautics and Space Administration — This effort will research and implement advanced Multiple-Input Multiple-Output (MIMO) Synthetic Aperture Radar (SAR) techniques which have the potential to improve...

History of nutrient inputs to the northeastern United States, 1930-2000

Science.gov (United States)

Hale, Rebecca L.; Hoover, Joseph H.; Wollheim, Wilfred M.; Vörösmarty, Charles J.

2013-04-01

Humans have dramatically altered nutrient cycles at local to global scales. We examined changes in anthropogenic nutrient inputs to the northeastern United States (NE) from 1930 to 2000. We created a comprehensive time series of anthropogenic N and P inputs to 437 counties in the NE at 5 year intervals. Inputs included atmospheric N deposition, biological N2 fixation, fertilizer, detergent P, livestock feed, and human food. Exports included exports of feed and food and volatilization of ammonia. N inputs to the NE increased throughout the study period, primarily due to increases in atmospheric deposition and fertilizer. P inputs increased until 1970 and then declined due to decreased fertilizer and detergent inputs. Livestock consistently consumed the majority of nutrient inputs over time and space. The area of crop agriculture declined during the study period but consumed more nutrients as fertilizer. We found that stoichiometry (N:P) of inputs and absolute amounts of N matched nutritional needs (livestock, humans, crops) when atmospheric components (N deposition, N2 fixation) were not included. Differences between N and P led to major changes in N:P stoichiometry over time, consistent with global trends. N:P decreased from 1930 to 1970 due to increased inputs of P, and increased from 1970 to 2000 due to increased N deposition and fertilizer and decreases in P fertilizer and detergent use. We found that nutrient use is a dynamic product of social, economic, political, and environmental interactions. Therefore, future nutrient management must take into account these factors to design successful and effective nutrient reduction measures.

Analytic uncertainty and sensitivity analysis of models with input correlations

Science.gov (United States)

Zhu, Yueying; Wang, Qiuping A.; Li, Wei; Cai, Xu

2018-03-01

Probabilistic uncertainty analysis is a common means of evaluating mathematical models. In mathematical modeling, the uncertainty in input variables is specified through distribution laws. Its contribution to the uncertainty in model response is usually analyzed by assuming that input variables are independent of each other. However, correlated parameters are often happened in practical applications. In the present paper, an analytic method is built for the uncertainty and sensitivity analysis of models in the presence of input correlations. With the method, it is straightforward to identify the importance of the independence and correlations of input variables in determining the model response. This allows one to decide whether or not the input correlations should be considered in practice. Numerical examples suggest the effectiveness and validation of our analytic method in the analysis of general models. A practical application of the method is also proposed to the uncertainty and sensitivity analysis of a deterministic HIV model.

On Optimal Input Design and Model Selection for Communication Channels

Energy Technology Data Exchange (ETDEWEB)

Li, Yanyan [ORNL; Djouadi, Seddik M [ORNL; Olama, Mohammed M [ORNL

2013-01-01

In this paper, the optimal model (structure) selection and input design which minimize the worst case identification error for communication systems are provided. The problem is formulated using metric complexity theory in a Hilbert space setting. It is pointed out that model selection and input design can be handled independently. Kolmogorov n-width is used to characterize the representation error introduced by model selection, while Gel fand and Time n-widths are used to represent the inherent error introduced by input design. After the model is selected, an optimal input which minimizes the worst case identification error is shown to exist. In particular, it is proven that the optimal model for reducing the representation error is a Finite Impulse Response (FIR) model, and the optimal input is an impulse at the start of the observation interval. FIR models are widely popular in communication systems, such as, in Orthogonal Frequency Division Multiplexing (OFDM) systems.

A Brief Talk on Cultural Input in English Teaching

Institute of Scientific and Technical Information of China (English)

王敏

2007-01-01

Different countries have different languages and cultures. My paper starts from the differentiation between western culture and Chinese culture to point out the importance and necessity of cultural input in English teaching and puts forward some approaches to enforce the cultural input in language teaching.

Robotics control using isolated word recognition of voice input

Science.gov (United States)

Weiner, J. M.

1977-01-01

A speech input/output system is presented that can be used to communicate with a task oriented system. Human speech commands and synthesized voice output extend conventional information exchange capabilities between man and machine by utilizing audio input and output channels. The speech input facility is comprised of a hardware feature extractor and a microprocessor implemented isolated word or phrase recognition system. The recognizer offers a medium sized (100 commands), syntactically constrained vocabulary, and exhibits close to real time performance. The major portion of the recognition processing required is accomplished through software, minimizing the complexity of the hardware feature extractor.

Automation of Geometry Input for Building Code Compliance Check

DEFF Research Database (Denmark)

Petrova, Ekaterina Aleksandrova; Johansen, Peter Lind; Jensen, Rasmus Lund

2017-01-01

Documentation of compliance with the energy performance regulations at the end of the detailed design phase is mandatory for building owners in Denmark. Therefore, besides multidisciplinary input, the building design process requires various iterative analyses, so that the optimal solutions can...... be identified amongst multiple alternatives. However, meeting performance criteria is often associated with manual data inputs and retroactive modifications of the design. Due to poor interoperability between the authoring tools and the compliance check program, the processes are redundant and inefficient...... from building geometry created in Autodesk Revit and its translation to input for compliance check analysis....

Input Scanners: A Growing Impact In A Diverse Marketplace

Science.gov (United States)

Marks, Kevin E.

1989-08-01

Just as newly invented photographic processes revolutionized the printing industry at the turn of the century, electronic imaging has affected almost every computer application today. To completely emulate traditionally mechanical means of information handling, computer based systems must be able to capture graphic images. Thus, there is a widespread need for the electronic camera, the digitizer, the input scanner. This paper will review how various types of input scanners are being used in many diverse applications. The following topics will be covered: - Historical overview of input scanners - New applications for scanners - Impact of scanning technology on select markets - Scanning systems issues

OFFSCALE: PC input processor for SCALE-4 criticality sequences

International Nuclear Information System (INIS)

Bowman, S.M.

1991-01-01

OFFSCALE is a personal computer program that serves as a user-friendly interface for the Criticality Safety Analysis Sequences (CSAS) available in SCALE-4. It is designed to assist a SCALE-4 user in preparing an input file for execution of criticality safety problems. Output from OFFSCALE is a card-image input file that may be uploaded to a mainframe computer to execute the CSAS4 control module in SCALE-4. OFFSCALE features a pulldown menu system that accesses sophisticated data entry screens. The program allows the user to quickly set up a CSAS4 input file and perform data checking

Video-based Chinese Input System via Fingertip Tracking

Directory of Open Access Journals (Sweden)

Chih-Chang Yu

2012-10-01

Full Text Available In this paper, we propose a system to detect and track fingertips online and recognize Mandarin Phonetic Symbol (MPS for user-friendly Chinese input purposes. Using fingertips and cameras to replace pens and touch panels as input devices could reduce the cost and improve the ease-of-use and comfort of computer-human interface. In the proposed framework, particle filters with enhanced appearance models are applied for robust fingertip tracking. Afterwards, MPS combination recognition is performed on the tracked fingertip trajectories using Hidden Markov Models. In the proposed system, the fingertips of the users could be robustly tracked. Also, the challenges of entering, leaving and virtual strokes caused by video-based fingertip input can be overcome. Experimental results have shown the feasibility and effectiveness of the proposed work.

Statistical testing of input factors in the carbonation of brine impacted fly ash.

Science.gov (United States)

Grace, Muriithi N; Wilson, Gitari M; Leslie, Petrik F

2012-01-01

A D-optimal design was applied in the study of input factors: temperature, pressure, solid/liquid (S/L) ratio and particle size and their influence on the carbonation of brine impacted fly ash (FA) determined. Both temperature and pressure were at two levels (30°C and 90°C; 1 Mpa and 4 Mpa), S/L ratio was at three levels (0.1, 0.5 and 1) while particle size was at 4 levels (bulk ash, 150 μm). Pressure was observed to have a slight influence on the % CaCO(3) yield while higher temperatures led to higher percentage CaCO(3) yield. The particle size range of 20 μm - 150 μm enhanced the degree of carbonation of the fly ash/brine slurries. This was closely followed by the bulk ash while the >150 μm particle fraction had the least influence on the % CaCO(3). The effect of S/L ratio was temperature dependent. At low temperature, the S/L ratio of 1 resulted in the highest % CaCO(3) formation while at high temperature, the ratio of 0.5 resulted in the highest percentage CaCO(3) formation. Overall the two most important factors in the carbonation of FA and brine were found to be particle size and temperature.

75 FR 34499 - Self-Regulatory Organizations; International Securities Exchange, LLC; Notice of Filing and...

Science.gov (United States)

2010-06-17

... maker/taker pricing program. The text of the proposed rule change is available on the Exchange's Web... qualification standards for market makers to receive a rebate under the Exchange's maker/taker pricing program... trading month for series trading between $0.03 and $5.00 in premium. \\8\\ The concept of incenting market...

Determinants of Agro-inputs redemption under the electronic wallet ...

African Journals Online (AJOL)

The study assessed the spread of farmers and participation in terms of input redemption and the determinants of farmers redeemed with agro-inputs under the electronic-wallet initiative of the Growth Enhancement Support Scheme of the On-going Agricultural Transformation Agenda. Secondary data covering the Nigerian ...

CONFU: Configuration Fuzzing Testing Framework for Software Vulnerability Detection.

Science.gov (United States)

Dai, Huning; Murphy, Christian; Kaiser, Gail

2010-01-01

Many software security vulnerabilities only reveal themselves under certain conditions, i.e., particular configurations and inputs together with a certain runtime environment. One approach to detecting these vulnerabilities is fuzz testing. However, typical fuzz testing makes no guarantees regarding the syntactic and semantic validity of the input, or of how much of the input space will be explored. To address these problems, we present a new testing methodology called Configuration Fuzzing. Configuration Fuzzing is a technique whereby the configuration of the running application is mutated at certain execution points, in order to check for vulnerabilities that only arise in certain conditions. As the application runs in the deployment environment, this testing technique continuously fuzzes the configuration and checks "security invariants" that, if violated, indicate a vulnerability. We discuss the approach and introduce a prototype framework called ConFu (CONfiguration FUzzing testing framework) for implementation. We also present the results of case studies that demonstrate the approach's feasibility and evaluate its performance.

MRTouch: Adding Touch Input to Head-Mounted Mixed Reality.

Science.gov (United States)

Xiao, Robert; Schwarz, Julia; Throm, Nick; Wilson, Andrew D; Benko, Hrvoje

2018-04-01

We present MRTouch, a novel multitouch input solution for head-mounted mixed reality systems. Our system enables users to reach out and directly manipulate virtual interfaces affixed to surfaces in their environment, as though they were touchscreens. Touch input offers precise, tactile and comfortable user input, and naturally complements existing popular modalities, such as voice and hand gesture. Our research prototype combines both depth and infrared camera streams together with real-time detection and tracking of surface planes to enable robust finger-tracking even when both the hand and head are in motion. Our technique is implemented on a commercial Microsoft HoloLens without requiring any additional hardware nor any user or environmental calibration. Through our performance evaluation, we demonstrate high input accuracy with an average positional error of 5.4 mm and 95% button size of 16 mm, across 17 participants, 2 surface orientations and 4 surface materials. Finally, we demonstrate the potential of our technique to enable on-world touch interactions through 5 example applications.

Effects of wastewater treatment plant effluent inputs on planktonic metabolic rates and microbial community composition in the Baltic Sea

DEFF Research Database (Denmark)

Vaquer-Sunyer, Raquel; Reader, Heather E.; Muthusamy, Saraladevi

2016-01-01

) contribute to eutrophication as they are important sources of nitrogen to coastal areas. Here, we evaluated the effects of wastewater treatment plant effluent inputs on Baltic Sea planktonic communities in four experiments. We tested for effects of effluent inputs on chlorophyll a content, bacterial....... An increase in BP and decrease in CR could be caused by high lability of the DOM that can support secondary bacterial production, without an increase in respiration. Increases in bacterial production and simultaneous decreases of primary production lead to more carbon being consumed in the microbial loop...

Design and evaluation of nonverbal sound-based input for those with motor handicapped.

Science.gov (United States)

Punyabukkana, Proadpran; Chanjaradwichai, Supadaech; Suchato, Atiwong

2013-03-01

Most personal computing interfaces rely on the users' ability to use their hand and arm movements to interact with on-screen graphical widgets via mainstream devices, including keyboards and mice. Without proper assistive devices, this style of input poses difficulties for motor-handicapped users. We propose a sound-based input scheme enabling users to operate Windows' Graphical User Interface by producing hums and fricatives through regular microphones. Hierarchically arranged menus are utilized so that only minimal numbers of different actions are required at a time. The proposed scheme was found to be accurate and capable of responding promptly compared to other sound-based schemes. Being able to select from multiple item-selecting modes helps reducing the average time duration needed for completing tasks in the test scenarios almost by half the time needed when the tasks were performed solely through cursor movements. Still, improvements on facilitating users to select the most appropriate modes for desired tasks should improve the overall usability of the proposed scheme.

MIFT: GIFT Combinatorial Geometry Input to VCS Code

Science.gov (United States)

1977-03-01

r-w w-^ H ^ß0318is CQ BRL °RCUMr REPORT NO. 1967 —-S: ... MIFT: GIFT COMBINATORIAL GEOMETRY INPUT TO VCS CODE Albert E...TITLE (and Subtitle) MIFT: GIFT Combinatorial Geometry Input to VCS Code S. TYPE OF REPORT & PERIOD COVERED FINAL 6. PERFORMING ORG. REPORT NUMBER...Vehicle Code System (VCS) called MORSE was modified to accept the GIFT combinatorial geometry package. GIFT , as opposed to the geometry package

ACT: A Benchmark for College Readiness, 2007-2011

Science.gov (United States)

Uzzell, Renata; Lewis, Sharon; Simon, Candace; Palacios, Moses; Guzman, Amilcar; Casserly, Michael

2012-01-01

This report was prepared by the Council of Great City Schools in collaboration with ACT to collect and analyze urban student performance between 2007 and 2011 and to examine student achievement by race and gender. Following is a summary of the study's findings: (1) The total number of ACT test takers increased both nationally and in CGCS districts…

Comments on James D. Brown and Thom Hudson's "The Alternatives in Language Assessment."

Science.gov (United States)

Bruton, Anthony; Brown, James Dean; Hudson, Thom

1999-01-01

Anthony Bruton comments on Brown and Hudson's article "The Alternatives in Language Assessment," (v32 n4 Win 1998). Raises questions about some of their definitions and categories and suggests additional items that need to be considered by test takers. Brown and Hudson reply with clarifications of terms and definition of the scope of their paper.…

Impeding Students' Efforts to Cheat in Online Classes

Science.gov (United States)

Hearn Moore, Paula; Head, J. Derrick; Griffin, Richard B.

2017-01-01

This paper identifies several methods a student could use to cheat while enrolled in an online course. Problems encountered in conducting an online course and in administering an online exam involve: (1) identifying the test taker, (2) preventing the theft of the exam, (3) combating the unauthorized use of textbooks and/or notes, (4) preparing an…

Modeling Answer Change Behavior: An Application of a Generalized Item Response Tree Model

Science.gov (United States)

Jeon, Minjeong; De Boeck, Paul; van der Linden, Wim

2017-01-01

We present a novel application of a generalized item response tree model to investigate test takers' answer change behavior. The model allows us to simultaneously model the observed patterns of the initial and final responses after an answer change as a function of a set of latent traits and item parameters. The proposed application is illustrated…

Ecosystem responses to reduced and oxidised nitrogen inputs in European terrestrial habitats

International Nuclear Information System (INIS)

Stevens, Carly J.; Manning, Pete; Berg, Leon J.L. van den; Graaf, Maaike C.C. de; Wamelink, G.W. Wieger; Boxman, Andries W.; Bleeker, Albert; Vergeer, Philippine; Arroniz-Crespo, Maria; Limpens, Juul; Lamers, Leon P.M.; Bobbink, Roland; Dorland, Edu

2011-01-01

While it is well established that ecosystems display strong responses to elevated nitrogen deposition, the importance of the ratio between the dominant forms of deposited nitrogen (NH x and NO y ) in determining ecosystem response is poorly understood. As large changes in the ratio of oxidised and reduced nitrogen inputs are occurring, this oversight requires attention. One reason for this knowledge gap is that plants experience a different NH x :NO y ratio in soil to that seen in atmospheric deposits because atmospheric inputs are modified by soil transformations, mediated by soil pH. Consequently species of neutral and alkaline habitats are less likely to encounter high NH 4 + concentrations than species from acid soils. We suggest that the response of vascular plant species to changing ratios of NH x :NO y deposits will be driven primarily by a combination of soil pH and nitrification rates. Testing this hypothesis requires a combination of experimental and survey work in a range of systems. - Changing ratios of NH x and NO y in deposition has important consequences for ecosystem function.

Synchronization of motor unit firings: an epiphenomenon of firing rate characteristics not common inputs.

Science.gov (United States)

Kline, Joshua C; De Luca, Carlo J

2016-01-01

Synchronous motor unit firing instances have been attributed to anatomical inputs shared by motoneurons. Yet, there is a lack of empirical evidence confirming the notion that common inputs elicit synchronization under voluntary conditions. We tested this notion by measuring synchronization between motor unit action potential trains (MUAPTs) as their firing rates progressed within a contraction from a relatively low force level to a higher one. On average, the degree of synchronization decreased as the force increased. The common input notion provides no empirically supported explanation for the observed synchronization behavior. Therefore, we investigated a more probable explanation for synchronization. Our data set of 17,546 paired MUAPTs revealed that the degree of synchronization varies as a function of two characteristics of the motor unit firing rate: the similarity and the slope as a function of force. Both are measures of the excitation of the motoneurons. As the force generated by the muscle increases, the firing rate slope decreases, and the synchronization correspondingly decreases. Different muscles have motor units with different firing rate characteristics and display different amounts of synchronization. Although this association is not proof of causality, it consistently explains our observations and strongly suggests further investigation. So viewed, synchronization is likely an epiphenomenon, subject to countless unknown neural interactions. As such, synchronous firing instances may not be the product of a specific design and may not serve a specific physiological purpose. Our explanation for synchronization has the advantage of being supported by empirical evidence, whereas the common input does not. Copyright © 2016 the American Physiological Society.

Exact Repetition as Input Enhancement in Second Language Acquisition.

Science.gov (United States)

Jensen, Eva Dam; Vinther, Thora

2003-01-01

Reports on two studies on input enhancement used to support learners' selection of focus of attention in Spanish second language listening material. Input consisted of video recordings of dialogues between native speakers. Exact repetition and speech rate reduction were examined for effect on comprehension, acquisition of decoding strategies, and…

Viability of Construct Validity of the Speaking Modules of International Language Examinations (IELTS vs. TOEFL iBT): Evidence from Iranian Test-Takers

Science.gov (United States)

Zahedi, Keivan; Shamsaee, Saeedeh

2012-01-01

The aim of the present research is to examine the viability of the construct validity of the speaking modules of two internationally recognized language proficiency examinations, namely IELTS and TOEFL iBT. High-stake standardized tests play a crucial and decisive role in determining the future academic life of many people. Overall obtained scores…

Differential Item Functioning (DIF) among Spanish-Speaking English Language Learners (ELLs) in State Science Tests

Science.gov (United States)

Ilich, Maria O.

Psychometricians and test developers evaluate standardized tests for potential bias against groups of test-takers by using differential item functioning (DIF). English language learners (ELLs) are a diverse group of students whose native language is not English. While they are still learning the English language, they must take their standardized tests for their school subjects, including science, in English. In this study, linguistic complexity was examined as a possible source of DIF that may result in test scores that confound science knowledge with a lack of English proficiency among ELLs. Two years of fifth-grade state science tests were analyzed for evidence of DIF using two DIF methods, Simultaneous Item Bias Test (SIBTest) and logistic regression. The tests presented a unique challenge in that the test items were grouped together into testlets---groups of items referring to a scientific scenario to measure knowledge of different science content or skills. Very large samples of 10, 256 students in 2006 and 13,571 students in 2007 were examined. Half of each sample was composed of Spanish-speaking ELLs; the balance was comprised of native English speakers. The two DIF methods were in agreement about the items that favored non-ELLs and the items that favored ELLs. Logistic regression effect sizes were all negligible, while SIBTest flagged items with low to high DIF. A decrease in socioeconomic status and Spanish-speaking ELL diversity may have led to inconsistent SIBTest effect sizes for items used in both testing years. The DIF results for the testlets suggested that ELLs lacked sufficient opportunity to learn science content. The DIF results further suggest that those constructed response test items requiring the student to draw a conclusion about a scientific investigation or to plan a new investigation tended to favor ELLs.

Testing Real-Time Systems Using UPPAAL

DEFF Research Database (Denmark)

Hessel, Anders; Larsen, Kim Guldstrand; Mikucionis, Marius

2008-01-01

This chapter presents principles and techniques for model-based black-box conformance testing of real-time systems using the Uppaal model-checking tool-suite. The basis for testing is given as a network of concurrent timed automata specified by the test engineer. Relativized input...

Inhibitory Gating of Basolateral Amygdala Inputs to the Prefrontal Cortex.

Science.gov (United States)

McGarry, Laura M; Carter, Adam G

2016-09-07

Interactions between the prefrontal cortex (PFC) and basolateral amygdala (BLA) regulate emotional behaviors. However, a circuit-level understanding of functional connections between these brain regions remains incomplete. The BLA sends prominent glutamatergic projections to the PFC, but the overall influence of these inputs is predominantly inhibitory. Here we combine targeted recordings and optogenetics to examine the synaptic underpinnings of this inhibition in the mouse infralimbic PFC. We find that BLA inputs preferentially target layer 2 corticoamygdala over neighboring corticostriatal neurons. However, these inputs make even stronger connections onto neighboring parvalbumin and somatostatin expressing interneurons. Inhibitory connections from these two populations of interneurons are also much stronger onto corticoamygdala neurons. Consequently, BLA inputs are able to drive robust feedforward inhibition via two parallel interneuron pathways. Moreover, the contributions of these interneurons shift during repetitive activity, due to differences in short-term synaptic dynamics. Thus, parvalbumin interneurons are activated at the start of stimulus trains, whereas somatostatin interneuron activation builds during these trains. Together, these results reveal how the BLA impacts the PFC through a complex interplay of direct excitation and feedforward inhibition. They also highlight the roles of targeted connections onto multiple projection neurons and interneurons in this cortical circuit. Our findings provide a mechanistic understanding for how the BLA can influence the PFC circuit, with important implications for how this circuit participates in the regulation of emotion. The prefrontal cortex (PFC) and basolateral amygdala (BLA) interact to control emotional behaviors. Here we show that BLA inputs elicit direct excitation and feedforward inhibition of layer 2 projection neurons in infralimbic PFC. BLA inputs are much stronger at corticoamygdala neurons compared

Effect of heat input on microstructure and mechanical properties of dissimilar joints between super duplex stainless steel and high strength low alloy steel

International Nuclear Information System (INIS)

Sadeghian, M.; Shamanian, M.; Shafyei, A.

2014-01-01

Highlights: • The microstructure of weld metal consists of austenite and ferrite. • The HAZ of the API X-65 shows different transformation. • Impact strength of sample with low heat input was lower than base metals. • The heat input at 0.506 kJ/mm is not the suitable for dissimilar joining between UNS S32750/API X-65. - Abstract: In the present study, microstructure and mechanical properties of UNS S32750 super duplex stainless steel (SDSS)/API X-65 high strength low alloy steel (HSLA) dissimilar joint were investigated. For this purpose, gas tungsten arc welding (GTAW) was used in two different heat inputs: 0.506 and 0.86 kJ/mm. The microstructures investigation with optical microscope, scanning electron microscope and X-ray diffraction showed that an increase in heat input led to a decrease in ferrite percentage, and that detrimental phases were not present. It also indicated that in heat affected zone of HSLA base metal in low heat input, bainite and ferrite phases were created; but in high heat input, perlite and ferrite phases were created. The results of impact tests revealed that the specimen with low heat input exhibited brittle fracture and that with high heat input had a higher strength than the base metals

Digital tape unit test facility software

Science.gov (United States)

Jackson, J. T.

1971-01-01

Two computer programs are described which are used for the collection and analysis of data from the digital tape unit test facility (DTUTF). The data are the recorded results of skew tests made on magnetic digital tapes which are used on computers as input/output media. The results of each tape test are keypunched onto an 80 column computer card. The format of the card is checked and the card image is stored on a master summary tape via the DTUTF card checking and tape updating system. The master summary tape containing the results of all the tape tests is then used for analysis as input to the DTUTF histogram generating system which produces a histogram of skew vs. date for selected data, followed by some statistical analysis of the data.

75 FR 42802 - Self-Regulatory Organizations; International Securities Exchange, LLC; Notice of Filing and...

Science.gov (United States)

2010-07-22

... under the Exchange's maker/taker pricing program. The text of the proposed rule change is available on... maker/taker pricing program. The Exchange recently adopted transaction fees and rebates for adding and... National Best Offer 80% of the time for series trading between $0.03 and $5.00 in premium in each of the...

76 FR 27117 - Self-Regulatory Organizations; C2 Options Exchange, Incorporated; Notice of Filing and Immediate...

Science.gov (United States)

2011-05-10

... exchange-traded fund (``ETF'') option classes traded on C2. Currently, transactions fees as set out in the... maker rebate and pay a liquidity removing taker rate of $.25 per contract; C2 Market-Makers receive a liquidity making rebate of $.25 per contract and pay a liquidity removing taker rate of $.34 per contract...

Quantum Mechanical Noise in a Michelson Interferometer with Nonclassical Inputs: Nonperturbative Treatment

Science.gov (United States)

King, Sun-Kun

1996-01-01

The variances of the quantum-mechanical noise in a two-input-port Michelson interferometer within the framework of the Loudon-Ni model were solved exactly in two general cases: (1) one coherent state input and one squeezed state input, and (2) two photon number states inputs. Low intensity limit, exponential decaying signal and the noise due to mixing were discussed briefly.

The Technological Input-output Efficiency of High-technology Enterprises in China Based on the DEA method

Directory of Open Access Journals (Sweden)

Lu Jing

2017-01-01

Full Text Available High-technology enterprises play the leader role in the regional economic progress, but nowadays technological resources have many problems such as division, separation and dispersing. It’s an urgent problem to be solved that how to evaluate input-output productivity of technological resources towards industries and regions scientifically and efficiently. Firstly the article analyzes the input-output efficiency status of technological resources at home and abroad. Then high-technology enterprises in 29 provinces, as the subject of evaluation, are analyzed for their operation efficiency by DEA. The article states the suggestions like balanced development among regions and reasonable structure of input and output by comparing the differences among regions. And the article estimates the technological resources configuration efficiency of 5 leader industries and explains the developmental characteristics and direction among industries. And on these bases the article conducts hypothesis testing for inner elements which might have an influence on the operational efficiency by Tobit model. Finally, the paper proposes many suggestions to the benefits of promoting the productivity of high-technology enterprise according to the comprehensive analysis.

Test Generator for MATLAB Simulations

Science.gov (United States)

Henry, Joel

2011-01-01

MATLAB Automated Test Tool, version 3.0 (MATT 3.0) is a software package that provides automated tools that reduce the time needed for extensive testing of simulation models that have been constructed in the MATLAB programming language by use of the Simulink and Real-Time Workshop programs. MATT 3.0 runs on top of the MATLAB engine application-program interface to communicate with the Simulink engine. MATT 3.0 automatically generates source code from the models, generates custom input data for testing both the models and the source code, and generates graphs and other presentations that facilitate comparison of the outputs of the models and the source code for the same input data. Context-sensitive and fully searchable help is provided in HyperText Markup Language (HTML) format.

Distribution of return point memory states for systems with stochastic inputs

International Nuclear Information System (INIS)

Amann, A; Brokate, M; Rachinskii, D; Temnov, G

2011-01-01

We consider the long term effect of stochastic inputs on the state of an open loop system which exhibits the so-called return point memory. An example of such a system is the Preisach model; more generally, systems with the Preisach type input-state relationship, such as in spin-interaction models, are considered. We focus on the characterisation of the expected memory configuration after the system has been effected by the input for sufficiently long period of time. In the case where the input is given by a discrete time random walk process, or the Wiener process, simple closed form expressions for the probability density of the vector of the main input extrema recorded by the memory state, and scaling laws for the dimension of this vector, are derived. If the input is given by a general continuous Markov process, we show that the distribution of previous memory elements can be obtained from a Markov chain scheme which is derived from the solution of an associated one-dimensional escape type problem. Formulas for transition probabilities defining this Markov chain scheme are presented. Moreover, explicit formulas for the conditional probability densities of previous main extrema are obtained for the Ornstein-Uhlenbeck input process. The analytical results are confirmed by numerical experiments.

SISTEM KONTROL OTOMATIK DENGAN MODEL SINGLE-INPUT-DUAL-OUTPUT DALAM KENDALI EFISIENSI UMUR-PEMAKAIAN INSTRUMEN

Directory of Open Access Journals (Sweden)

S.N.M.P. Simamora

2014-10-01

Full Text Available Efficiency condition occurs when the value of the used outputs compared to the resource total that has been used almost close to the value 1 (absolute environment. An instrument to achieve efficiency if the power output level has decreased significantly in the life of the instrument used, if it compared to the previous condition, when the instrument is not equipped with additional systems (or proposed model improvement. Even more effective if the inputs model that are used in unison to achieve a homogeneous output. On this research has been designed and implemented the automatic control system for models of single input-dual-output, wherein the sampling instruments used are lamp and fan. Source voltage used is AC (alternate-current and tested using quantitative research methods and instrumentation (with measuring instruments are observed. The results obtained demonstrate the efficiency of the instrument experienced a significant current model of single-input-dual-output applied separately instrument trials such as lamp and fan when it compared to the condition or state before. And the result show that the design has been built, can also run well.

Energy Consumptions of Text Input Methods on Smartphones

OpenAIRE

Obison, Henry; Ajuorah, Chiagozie

2013-01-01

Mobile computing devices, in particular smartphones are powered from Lithium-ion batteries, which are limited in capacity. With the increasing popularity of mobile systems, various text input methods have been developed to improve user experience and performance. Briefly, text input method is a user interface that can be used to compose an electronic mail, configure mobile Virtual Private Network, and carryout bank transactions and online purchases. Efficient energy management in these system...

New efficient five-input majority gate for quantum-dot cellular automata

International Nuclear Information System (INIS)

Farazkish, Razieh; Navi, Keivan

2012-01-01

A novel fault-tolerant five-input majority gate for quantum-dot cellular automata is presented. Quantum-dot cellular automata (QCA) is an emerging technology which is considered to be presented in future computers. Two principle logic elements in QCA are “majority gate” and “inverter.” In this paper, we propose a new approach to the design of fault-tolerant five-input majority gate by considering two-dimensional arrays of QCA cells. We analyze fault tolerance properties of such block five-input majority gate in terms of misalignment, missing, and dislocation cells. Some physical proofs are used for verifying five-input majority gate circuit layout and functionality. Our results clearly demonstrate that the redundant version of the block five-input majority gate is more robust than the standard style for this gate.

The human motor neuron pools receive a dominant slow‐varying common synaptic input

Science.gov (United States)

Negro, Francesco; Yavuz, Utku Şükrü

2016-01-01

Key points Motor neurons in a pool receive both common and independent synaptic inputs, although the proportion and role of their common synaptic input is debated.Classic correlation techniques between motor unit spike trains do not measure the absolute proportion of common input and have limitations as a result of the non‐linearity of motor neurons.We propose a method that for the first time allows an accurate quantification of the absolute proportion of low frequency common synaptic input (60%) of common input, irrespective of their different functional and control properties.These results increase our knowledge about the role of common and independent input to motor neurons in force control. Abstract Motor neurons receive both common and independent synaptic inputs. This observation is classically based on the presence of a significant correlation between pairs of motor unit spike trains. The functional significance of different relative proportions of common input across muscles, individuals and conditions is still debated. One of the limitations in our understanding of correlated input to motor neurons is that it has not been possible so far to quantify the absolute proportion of common input with respect to the total synaptic input received by the motor neurons. Indeed, correlation measures of pairs of output spike trains only allow for relative comparisons. In the present study, we report for the first time an approach for measuring the proportion of common input in the low frequency bandwidth (60%) proportion of common low frequency oscillations with respect to their total synaptic input. These results suggest that the central nervous system provides a large amount of common input to motor neuron pools, in a similar way to that for muscles with different functional and control properties. PMID:27151459

HEALTH-RISK BEHAVIOUR IN REGARD OF FAMILY STRUCTURE AND ITS EFFECT ON ACADEMIC ACHIEVEMENT

Directory of Open Access Journals (Sweden)

Kovács, Karolina Eszter

2018-01-01

Full Text Available The frequency of health-risk behaviours like smoking, alcohol consumption and substance use is usually higher in adolescence. In addition, its appearance is higher among students coming from non-intact families. These factors also have a strong influence on academic achievement as students from fragile families and students having these health-damaging habits tend to be less effective. According to our results, four different student clusters can be detected regarding health behaviour (traditional risk-takers, hard risk-takers, ambivalent students and risk-avoiders. Ambivalent students reached the best achievement while hard risk-takers showed the poorest efficacy. Finally, students from intact families showed better results compared to their peers from single-parent or patchwork families.

The relationship of high school graduation exams to graduation rates and SAT scores.

OpenAIRE

Gregory J. Marchant; Sharon E. Paulson

2005-01-01

The current study examined the effect of high school graduation exams on states' graduation rates, states' aggregated SAT scores, and individual students' SAT scores. Three data sources were used: One source identified states requiring a standardized test for graduation; the NCES provided state aggregated data on graduation rates for the class of 2002; and the College Board provided its 2001 SAT database for all test-takers. After controlling for students' demographic characteristics (e.g., r...

The establishment of implicit perspectives of personality among Zulu-speaking people in South Africa / J. van Rensburg

OpenAIRE

Van Rensburg, Janhendrik

2008-01-01

The application of personality assessment for clinical and personnel decisions has long been an activity of interest to psychologists all over the world. In South Africa, personality assessment tools are used for the purpose of hiring, for placement decisions, to guide and assess training and development, and to evaluate the performance of workers. Psychological testing in South Africa was formerly initiated with white test takers in mind. It has been found that, currently...

File list: InP.Adp.10.Input_control.AllCell [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.Adp.10.Input_control.AllCell hg19 Input control Input control Adipocyte SRX0194...p://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/InP.Adp.10.Input_control.AllCell.bed ...

File list: InP.Unc.20.Input_control.AllCell [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.Unc.20.Input_control.AllCell sacCer3 Input control Input control Unclassified E.../dbarchive.biosciencedbc.jp/kyushu-u/sacCer3/assembled/InP.Unc.20.Input_control.AllCell.bed ...

File list: InP.Epd.50.Input_control.AllCell [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.Epd.50.Input_control.AllCell mm9 Input control Input control Epidermis SRX14260...tp://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.Epd.50.Input_control.AllCell.bed ...

File list: InP.PSC.05.Input_control.AllCell [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.PSC.05.Input_control.AllCell mm9 Input control Input control Pluripotent stem c... http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.PSC.05.Input_control.AllCell.bed ...

File list: InP.Epd.20.Input_control.AllCell [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.Epd.20.Input_control.AllCell mm9 Input control Input control Epidermis SRX70095...tp://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.Epd.20.Input_control.AllCell.bed ...

Optimization of Quantum-state-preserving Frequency Conversion by Changing the Input Signal

DEFF Research Database (Denmark)

Andersen, Lasse Mejling; Reddy, D. V.; McKinstrie, C. J.

We optimize frequency conversion based on four-wave mixing by using the input modes of the system. We find a 10-25 % higher conversion efficiency relative to a pump-shaped input signal.......We optimize frequency conversion based on four-wave mixing by using the input modes of the system. We find a 10-25 % higher conversion efficiency relative to a pump-shaped input signal....

40 CFR 1065.210 - Work input and output sensors.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Work input and output sensors. 1065... Ambient Conditions § 1065.210 Work input and output sensors. (a) Application. Use instruments as specified... sensors, transducers, and meters that meet the specifications in Table 1 of § 1065.205. Note that your...

File list: InP.ALL.05.Input_control.AllCell [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.ALL.05.Input_control.AllCell dm3 Input control Input control All cell types SRX...ttp://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/InP.ALL.05.Input_control.AllCell.bed ...

File list: InP.Emb.50.Input_control.AllCell [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.Emb.50.Input_control.AllCell dm3 Input control Input control Embryo SRX681824,S...http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/InP.Emb.50.Input_control.AllCell.bed ...

File list: InP.ALL.50.Input_control.AllCell [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.ALL.50.Input_control.AllCell sacCer3 Input control Input control All cell types.../dbarchive.biosciencedbc.jp/kyushu-u/sacCer3/assembled/InP.ALL.50.Input_control.AllCell.bed ...

File list: InP.Adp.05.Input_control.AllCell [Chip-atlas[Archive

Lifescience Database Archive (English)