Working Memory Structure in 10- and 15-Year Old Children with Mild to Borderline Intellectual, Disabilities

Science.gov (United States)

van der Molen, Mariet J.

2010-01-01

The validity of Baddeley's working memory model within the typically developing population, was tested. However, it is not clear if this model also holds in children and adolescents with mild to, borderline intellectual disabilities (ID; IQ score 55-85). The main purpose of this study was therefore, to explore the model's validity in this…

Working memory for braille is shaped by experience.

Science.gov (United States)

Cohen, Henri; Scherzer, Peter; Viau, Robert; Voss, Patrice; Lepore, Franco

2011-03-01

Tactile working memory was found to be more developed in completely blind (congenital and acquired) than in semi-sighted subjects, indicating that experience plays a crucial role in shaping working memory. A model of working memory, adapted from the classical model proposed by Baddeley and Hitch1 and Baddeley2 is presented where the connection strengths of a highly cross-modal network are altered through experience.

Working memory for braille is shaped by experience

OpenAIRE

Cohen, Henri; Scherzer, Peter; Viau, Robert; Voss, Patrice; Lepore, Franco

2011-01-01

Tactile working memory was found to be more developed in completely blind (congenital and acquired) than in semi-sighted subjects, indicating that experience plays a crucial role in shaping working memory. A model of working memory, adapted from the classical model proposed by Baddeley and Hitch1 and Baddeley2 is presented where the connection strengths of a highly cross-modal network are altered through experience.

The Joint Tactical Radio System: Lessons Learned and the Way Forward

Science.gov (United States)

2012-02-01

correspondent aptly asserts, “the only reason your laptop can go online from your table at Starbucks is that its wireless signal has to carry only a few...competitive pricing at the acquisition level” (Baddeley, 2010, p. 1). Upon meeting capabilities requirements, both Thales Communication and Harris... price , within the specifications they defined” (Baddeley, 2010, p. 10). Over time, the JPEO plans to invite other vendors to compete, provided that

The selective disruption of spatial working memory by eye movements

OpenAIRE

Postle, Bradley R.; Idzikowski, Christopher; Sala, Sergio Della; Logie, Robert H.; Baddeley, Alan D.

2006-01-01

In the late 1970s/early 1980s, Baddeley and colleagues conducted a series of experiments investigating the role of eye movements in visual working memory. Although only described briefly in a book (Baddeley, 1986), these studies have influenced a remarkable number of empirical and theoretical developments in fields ranging from experimental psychology to human neuropsychology to nonhuman primate electrophysiology. This paper presents, in full detail, three critical studies from this series, t...

The Relations between Working Memory and Mathematics Achievement of Children in the Primary Grades

OpenAIRE

Tzoneva, Irina Staykova

2015-01-01

This study investigated the predictive relations between working memory in Kindergarten and mathematics achievement in first and second grade. The research is underpinned by Baddeley’s model of working memory (Baddeley & Hitch, 1974; Baddeley, 1986, 1996, 2000) and places particular emphasis on the roles of the central executive and the phonological loop components of the working memory system. A sample consisted of 92 participants (age range: 4 years, 4 months to 6 years, 5 months). Meas...

Meta-analysis of the research impact of Baddeley’s multicomponent working memory model and Cowan’s embedded-processes model of working memory : a bibliometric mapping approach

OpenAIRE

Gruszka-Gosiewska, Aleksandra; Orzechowski, Jarosław

2016-01-01

In this study bibliometric mapping method was employed to visualise the current research trends and the impact of the two most influential models of working memory, namely: A. D. Baddeley and G. J. Hitch’s (1974) multicomponent working memory model and N. Cowan’s (1988) embedded-processes model of working memory. Using VOSviewer software two maps were generated based on the index-term words extracted from the research papers citing Baddeley (2000) and Cowan (2001), respectively. The maps repr...

The role of inferior parietal and inferior frontal cortex in working memory.

Science.gov (United States)

Baldo, Juliana V; Dronkers, Nina F

2006-09-01

Verbal working memory involves two major components: a phonological store that holds auditory-verbal information very briefly and an articulatory rehearsal process that allows that information to be refreshed and thus held longer in short-term memory (A. Baddeley, 1996, 2000; A. Baddeley & G. Hitch, 1974). In the current study, the authors tested two groups of patients who were chosen on the basis of their relatively focal lesions in the inferior parietal (IP) cortex or inferior frontal (IF) cortex. Patients were tested on a series of tasks that have been previously shown to tap phonological storage (span, auditory rhyming, and repetition) and articulatory rehearsal (visual rhyming and a 2-back task). As predicted, IP patients were disproportionately impaired on the span, rhyming, and repetition tasks and thus demonstrated a phonological storage deficit. IF patients, however, did not show impairment on these storage tasks but did exhibit impairment on the visual rhyming task, which requires articulatory rehearsal. These findings lend further support to the working memory model and provide evidence of the roles of IP and IF cortex in separable working memory processes. ((c) 2006 APA, all rights reserved).

Validy and Reliability of two Working Memory Tests: Aritmetic Amplitude and Counting

Directory of Open Access Journals (Sweden)

Burin, Débora I.

2013-04-01

Full Text Available Working Memory is a memory system involved in the storage and concurrent processing of information (Baddeley, 2000. Arithmetic Span (Conway et al., 2005 and Counting Span (Conway, et al. 2005 are two traditional verbal working memory capacity tasks. The aim of this article is to present reliability and validity data of Arithmetic and Counting Span Tasks. They were administered, along with Reading Span task, to 88 university students with a mean age of 23.10 years. The reliability analysis showed an excellent internal consistency, and a one factor model with a very good fit to the data was observed using a confirmatory factor analysis. These results indicate that both tasks are reliable and valid measures to assess verbal working memory capacity.

Context-dependent memory in a meaningful environment for medical education: in the classroom and at the bedside.

Science.gov (United States)

Koens, Franciska; Ten Cate, Olle Th J; Custers, Eugène J F M

2003-01-01

Learning-in-context is a much-discussed topic in medical education. Information is said to be better recalled when the learning environment resembles the later retrieval environment. Godden and Baddeley (1975) showed that divers recalled words better when the recall condition matched the original learning environment, i.e. underwater or on land. Though it is unclear whether the findings can be generalized for medical education, medical educators regularly refer to them. We replicated the Godden and Baddeley study in ecologically more valid conditions for medical education and extended it with meaningful subject matter (namely, a patient case description). Sixty-three clerks were randomized over four conditions, contrasting a clinical (bedside) with an educational (classroom) environment as both learning and recall conditions. Students were asked to recall a list of words and a patient case in the same environment or in the opposite environment as where they learned it. We failed to find a significant same-context advantage for free recall of the list of words and the patient case propositions. However, there does appear to be a slight tendency towards better recall of the case description when learning took place in the clinical environment. In medical education, the context, if conceived as physical surroundings, does not seem to contribute to a same-context advantage. One should be cautious in generalizing the findings of Godden and Baddeley. However, different forms of 'context' other than the physical one used in the Godden and Baddeley study may well enhance learning effects in medical education.

Integrated cross-domain object storage in working memory: evidence from a verbal-spatial memory task.

Science.gov (United States)

Morey, Candice C

2009-11-01

Working-memory theories often include domain-specific verbal and visual stores (e.g., the phonological and visuospatial buffers of Baddeley, 1986), and some also posit more general stores thought to be capable of holding verbal or visuospatial materials (Baddeley, 2000; Cowan, 2005). However, it is currently unclear which type of store is primarily responsible for maintaining objects that include components from multiple domains. In these studies, a spatial array of letters was followed by a single probe identical to an item in the array or differing systematically in spatial location, letter identity, or their combination. Concurrent verbal rehearsal suppression impaired memory in each of these trial types in a task that required participants to remember verbal-spatial binding, but did not impair memory for spatial locations if the task did not require verbal-spatial binding for a correct response. Thus, spatial information might be stored differently when it must be bound to verbal information. This suggests that a cross-domain store such as the episodic buffer of Baddeley (2000) or the focus of attention of Cowan (2001) might be used for integrated object storage, rather than the maintenance of associations between features stored in separate domain-specific buffers.

Does visuo-spatial working memory generally contribute to immediate serial letter recall?

Science.gov (United States)

Fürstenberg, A; Rummer, R; Schweppe, J

2013-01-01

This work contributes to the understanding of the visual similarity effect in verbal working memory, a finding that suggests that the visuo-spatial sketch pad-the system in Baddeley's working memory model specialised in retaining nonverbal visual information-might be involved in the retention of visually presented verbal materials. Crucially this effect is implicitly interpreted by the most influential theory of multimedia learning as evidence for an obligatory involvement of the visuo-spatial sketch pad. We claim that it is only involved when the functioning of the working memory component normally used for processing verbal material is impaired. In this article we review the studies that give rise to the idea of obligatory involvement of the visuo-spatial sketch pad and suggest that some findings can be understood with reference to orthographic rather than visual similarity. We then test an alternative explanation of the finding that is most apt to serve as evidence for obligatory involvement of the visuo-spatial sketch pad. We conclude that, in healthy adults and under normal learning conditions, the visual similarity effect can be explained within the framework of verbal working memory proposed by Baddeley (e.g., 1986, 2000) without additional premises regarding the visuo-spatial sketch.

Integração de três conceitos: função executiva, memória de trabalho e aprendizado

Directory of Open Access Journals (Sweden)

Carlos Alberto Mourão Junior

Full Text Available O presente artigo discute o conceito de função executiva enquanto um processo de integração temporal, envolvendo funções como o ajuste preparatório, o controle inibitório e a memória de trabalho. Em seguida questiona o modelo multicomponente de Baddeley para a memória de trabalho e propõe uma nova classificação da função executiva que engloba os modelos de Fuster e de Baddeley. Finalmente revisita o conceito neurobiológico de aprendizado e sugere uma abordagem para se avaliar os déficits de aprendizagem que leve em conta a função executiva como a pedra angular do processo cognitivo.

The multi-component model of working memory: explorations in experimental cognitive psychology.

Science.gov (United States)

Repovs, G; Baddeley, A

2006-04-28

There are a number of ways one can hope to describe and explain cognitive abilities, each of them contributing a unique and valuable perspective. Cognitive psychology tries to develop and test functional accounts of cognitive systems that explain the capacities and properties of cognitive abilities as revealed by empirical data gathered by a range of behavioral experimental paradigms. Much of the research in the cognitive psychology of working memory has been strongly influenced by the multi-component model of working memory [Baddeley AD, Hitch GJ (1974) Working memory. In: Recent advances in learning and motivation, Vol. 8 (Bower GA, ed), pp 47-90. New York: Academic Press; Baddeley AD (1986) Working memory. Oxford, UK: Clarendon Press; Baddeley A. Working memory: Thought and action. Oxford: Oxford University Press, in press]. By expanding the notion of a passive short-term memory to an active system that provides the basis for complex cognitive abilities, the model has opened up numerous questions and new lines of research. In this paper we present the current revision of the multi-component model that encompasses a central executive, two unimodal storage systems: a phonological loop and a visuospatial sketchpad, and a further component, a multimodal store capable of integrating information into unitary episodic representations, termed episodic buffer. We review recent empirical data within experimental cognitive psychology that has shaped the development of the multicomponent model and the understanding of the capacities and properties of working memory. Research based largely on dual-task experimental designs and on neuropsychological evidence has yielded valuable information about the fractionation of working memory into independent stores and processes, the nature of representations in individual stores, the mechanisms of their maintenance and manipulation, the way the components of working memory relate to each other, and the role they play in other

Role of working memory components in planning performance of individuals with Parkinson's disease.

Science.gov (United States)

Altgassen, Mareike; Phillips, Louise; Kopp, Ute; Kliegel, Matthias

2007-06-11

The current study investigated the involvement of all four components of Baddeley's [Baddeley, A. D. (2000). The episodic buffer: A new component of working memory? Trends in Cognitive Sciences, 4, 417-423] revised working memory model in deficits of planning accompanying Parkinson's disease (PD). PD resulted in poorer formulation and execution of plans, as measured by the Tower of London task. PD also reduced the efficiency of the episodic buffer and central executive components of working memory, but did not influence storage of verbal or visuospatial information. Planning deficits in PD were particularly linked to problems in integrating multimodal short-term information with long-term memory (episodic buffer). These results emphasize the importance of integrative and executive processing in cognitive problems in PD, rather than simple memory deficits.

Working memory resources in young children with mathematical difficulties.

Science.gov (United States)

Kyttälä, Minna; Aunio, Pirjo; Hautamäki, Jarkko

2010-02-01

Working memory (WM) (Baddeley, 1986, 1997) is argued to be one of the most important cognitive resources underlying mathematical competence (Geary, 2004). Research has established close links between WM deficits and mathematical difficulties. This study investigated the possible deficits in WM, language and fluid intelligence that seem to characterize 4- to 6-year-old children with poor early mathematical skills before formal mathematics education. Children with early mathematical difficulties showed poor performance in both verbal and visuospatial WM tasks as well as on language tests and a fluid intelligence test indicating a thoroughly lower cognitive base. Poor WM performance was not moderated by fluid intelligence, but the extent of WM deficits was related to language skills. The educational implications are discussed.

Discrimination against Facially Stigmatized Applicants in Interviews: An Eye-Tracking and Face-to-Face Investigation

Science.gov (United States)

Madera, Juan M.; Hebl, Michelle R.

2012-01-01

Drawing from theory and research on perceived stigma (Pryor, Reeder, Yeadon, & Hesson-McInnis, 2004), attentional processes (Rinck & Becker, 2006), working memory (Baddeley & Hitch, 1974), and regulatory resources (Muraven & Baumeister, 2000), the authors examined discrimination against facially stigmatized applicants and the processes involved.…

Asymmetric cross-domain interference between two working memory tasks : Implications for models of working memory

NARCIS (Netherlands)

Morey, Candice C.; Morey, Richard D.; van der Reijden, Madeleine; Holweg, Margot

2013-01-01

Observations of higher dual-task costs for within-domain than cross-domain task combinations constitute classic evidence for multi-component models of working memory (e.g., Baddeley, 1986; Logie, 2011). However, we report an asymmetric pattern of interference between verbal and visual-spatial tasks,

The Episodic Buffer in Children with Intellectual Disabilities: An Exploratory Study

Science.gov (United States)

Henry, Lucy A.

2010-01-01

Performance on three verbal measures (story recall, paired associated learning, category fluency) designed to assess the integration of long-term semantic and linguistic knowledge, phonological working memory and executive resources within the proposed "episodic buffer" of working memory (Baddeley, 2007) was assessed in children with intellectual…

Reconceptualizing Working Memory in Educational Research

Science.gov (United States)

Fenesi, Barbara; Sana, Faria; Kim, Joseph A.; Shore, David I.

2015-01-01

In recent years, research from cognitive science has provided a solid theoretical framework to develop evidence-based interventions in education. In particular, research into reading, writing, language, mathematics and multimedia learning has been guided by the application of Baddeley's multicomponent model of working memory. However, an…

Does Phonological Short-Term Memory Causally Determine Vocabulary Learning? Toward a Computational Resolution of the Debate

Science.gov (United States)

Gupta, Prahlad; Tisdale, Jamie

2009-01-01

The relationship between nonword repetition ability and vocabulary size and vocabulary learning has been a topic of intense research interest and investigation over the last two decades, following the demonstration that nonword repetition accuracy is predictive of vocabulary size (Gathercole & Baddeley, 1989). However, the nature of this…

The Multiple-Choice Concept Map (MCCM): An Interactive Computer-Based Assessment Method

Science.gov (United States)

Sas, Ioan Ciprian

2010-01-01

This research attempted to bridge the gap between cognitive psychology and educational measurement (Mislevy, 2008; Leighton & Gierl, 2007; Nichols, 1994; Messick, 1989; Snow & Lohman, 1989) by using cognitive theories from working memory (Baddeley, 1986; Miyake & Shah, 1999; Grimley & Banner, 2008), multimedia learning (Mayer, 2001), and cognitive…

Exploration of a "Double-Jeopardy" Hypothesis within Working Memory Profiles for Children with Specific Language Impairment

Science.gov (United States)

Briscoe, J.; Rankin, P. M.

2009-01-01

Background: Children with specific language impairment (SLI) often experience difficulties in the recall and repetition of verbal information. Archibald and Gathercole (2006) suggested that children with SLI are vulnerable across two separate components of a tripartite model of working memory (Baddeley and Hitch 1974). However, the hierarchical…

Predictors of verbal working memory in children with cerebral palsy.

NARCIS (Netherlands)

Peeters, M.; Verhoeven, L.; Moor, J.M.H. de

2009-01-01

The goal of the present study was to examine the precursors of verbal working memory in 52 children with cerebral palsy with varying degrees of speech impairments in the first grade of special education. Following Baddeley's model of working memory, children's verbal working memory was measured by

Functional Deficits in Phonological Working Memory in Children with Intellectual Disabilities

Science.gov (United States)

Schuchardt, Kirsten; Maehler, Claudia; Hasselhorn, Marcus

2011-01-01

Recent studies indicate that children with intellectual disabilities have functional limitations primarily in the phonological loop of working memory (Baddeley, 1986). These findings are indicative of a specific structural deficit. Building on this research, the present study examines whether it is possible to identify specific phonological…

The Implications of Congenital Deafness for Working Memory.

Science.gov (United States)

Chalifoux, Lisa M.

1991-01-01

A. Baddeley's model of the working memory of congenitally deaf persons is examined in light of research on encoding by this population. It is concluded that a model of the working memory of the deaf must include subsystems for articulatory, sign, and visual encoding. (Author/DB)

Developmental Change in a Spatial Task of Attentional Capacity: An Essay toward an Integration of Two Working Memory Models.

Science.gov (United States)

de Ribaupierre, Anik; Bailleux, Christine

1994-01-01

Attempts the theoretical rapprochement of two theoretical constructs on working memory, neo-Piagetian models and Baddeley's model. Summarizes both types of models, then discusses their similarities and differences. Presents the results of a longitudinal study that supported the idea that these models might be complementary rather than…

Reflections on Working Memory: Are the Two Models Complementary?

Science.gov (United States)

Pascual-Leone, Juan

2000-01-01

Compares and contrasts working memory theory of Baddeley and theory of constructive operators of Pascual- Leone. Concludes that although the theory of constructive operators is complementary with working memory theory (explains developmental and individual differences that working memory theory cannot), the converse is not true; theory of…

Predictors of verbal working memory in children with cerebral palsy

NARCIS (Netherlands)

Peeters, M.H.J.; Verhoeven, L.T.W.; Moor, J.M.H. de

2009-01-01

The goal of the present study was to examine the precursors of verbal working memory in 52 children with cerebral palsy with varying degrees of speech impairments in the first grade of special education. Following Baddeley's model of working memory, children's verbal working memory was measured by

Models of working memory:Mechanisms of active maintenance and executive control (1999 Models of working memory:Mechanisms of active maintenance and executive control (1999

Directory of Open Access Journals (Sweden)

Augusto Buchweitz

2008-04-01

Full Text Available What is working memory, anyway?’ Despite the seminal definition (Baddeley & Hitch 1974; Daneman & Carpenter 1980 of working memory (WM being the system or mechanism at the basis of maintaining task-relevant information during the performance of a cognitive task (p. 1, and despite the familiarity of the term, addressing the question of what WM really is does not seem to be in the same ballpark of easily-put answers; it is not even in the same league. What is working memory, anyway?’ Despite the seminal definition (Baddeley & Hitch 1974; Daneman & Carpenter 1980 of working memory (WM being the system or mechanism at the basis of maintaining task-relevant information during the performance of a cognitive task (p. 1, and despite the familiarity of the term, addressing the question of what WM really is does not seem to be in the same ballpark of easily-put answers; it is not even in the same league.

Modularity, Working Memory and Language Acquisition

Science.gov (United States)

Baddeley, Alan D.

2017-01-01

The concept of modularity is used to contrast the approach to working memory proposed by Truscott with the Baddeley and Hitch multicomponent model. This proposes four sub components comprising the "central executive," an executive control system of limited attentional capacity that utilises storage based on separate but interlinked…

Working Memory Functioning in Children with Learning Disorders and Specific Language Impairment

Science.gov (United States)

Schuchardt, Kirsten; Bockmann, Ann-Katrin; Bornemann, Galina; Maehler, Claudia

2013-01-01

Purpose: On the basis of Baddeley's working memory model (1986), we examined working memory functioning in children with learning disorders with and without specific language impairment (SLI). We pursued the question whether children with learning disorders exhibit similar working memory deficits as children with additional SLI. Method: In…

Working memory development in children with mild to borderline intellectual disabilities

NARCIS (Netherlands)

Van der Molen, M. J.; Henry, L. A.; Van Luit, J. E H

2014-01-01

Background: The purpose of the current cross-sectional study was to examine the developmental progression in working memory (WM) between the ages of 9 and 16 years in a large sample of children with mild to borderline intellectual disabilities (MBID). Baddeley's influential WM model was used as a

The Developmental Trajectory of Nonword Repetition

Science.gov (United States)

Chiat, Shula

2006-01-01

In line with the original presentation of nonword repetition as a measure of phonological short-term memory (Gathercole & Baddeley, 1989), the theoretical account Gathercole (2006) puts forward in her Keynote Article focuses on phonological storage as the key capacity common to nonword repetition and vocabulary acquisition. However, evidence that…

Automatic and Controlled Processing in Sentence Recall: The Role of Long-Term and Working Memory

Science.gov (United States)

Jefferies, E.; Lambon Ralph, M.A.; Baddeley, A.D.

2004-01-01

Immediate serial recall is better for sentences than word lists presumably because of the additional support that meaningful material receives from long-term memory. This may occur automatically, without the involvement of attention, or may require additional attentionally demanding processing. For example, the episodic buffer model (Baddeley,…

Competing Core Processes in Attention-Deficit/Hyperactivity Disorder (ADHD): Do Working Memory Deficiencies Underlie Behavioral Inhibition Deficits?

Science.gov (United States)

Alderson, R. Matt; Rapport, Mark D.; Hudec, Kristen L.; Sarver, Dustin E.; Kofler, Michael J.

2010-01-01

The current study examined competing predictions of the working memory and behavioral inhibition models of ADHD. Behavioral inhibition was measured using a conventional stop-signal task, and central executive, phonological, and visuospatial working memory components (Baddeley 2007) were assessed in 14 children with ADHD and 13 typically developing…

Theorizing and Measuring Working Memory in First and Second Language Research

Science.gov (United States)

Wen, Zhisheng

2014-01-01

Working memory (WM) generally refers to the human ability to temporarily maintain and manipulate a limited amount of information in immediate consciousness when carrying out complex cognitive tasks such as problem-solving and language comprehension. Though much controversy has surrounded the WM concept since its inception by Baddeley & Hitch…

Two Maintenance Mechanisms of Verbal Information in Working Memory

Science.gov (United States)

Camos, V.; Lagner, P.; Barrouillet, P.

2009-01-01

The present study evaluated the interplay between two mechanisms of maintenance of verbal information in working memory, namely articulatory rehearsal as described in Baddeley's model, and attentional refreshing as postulated in Barrouillet and Camos's Time-Based Resource-Sharing (TBRS) model. In four experiments using complex span paradigm, we…

Semantic and Phonological Loop Effects on Verbal Working Memory in Middle-Age Adults with Mental Retardation

Science.gov (United States)

Kittler, Phyllis; Krinsky-McHale, Sharon J.; Devenny, Darlynne A.

2004-01-01

Semantic and phonological loop effects on verbal working memory were examined among middle-age adults with Down syndrome and those with unspecified mental retardation in the context of Baddeley's working memory model. Recall was poorer for phonologically similar, semantically similar, and long words compared to recall of dissimilar short words.…

Impaired Verbal Short-Term Memory in down Syndrome Reflects a Capacity Limitation Rather than Atypically Rapid Forgetting

Science.gov (United States)

M. Purser, H.R.; Jarrold, C.

2005-01-01

Individuals with Down syndrome suffer from relatively poor verbal short-term memory. Recent work has indicated that this deficit is not caused by problems of audition, speech, or articulatory rehearsal within the phonological loop component of Baddeley and Hitch's working memory model. Given this, two experiments were conducted to investigate…

Verbal Working Memory in Children with Mild Intellectual Disabilities

Science.gov (United States)

Van der Molen, M. J.; Van Luit, J. E. H.; Jongmans, M. J.; Van der Molen, M. W.

2007-01-01

Background: Previous research into working memory of individuals with intellectual disabilities (ID) has established clear deficits. The current study examined working memory in children with mild ID (IQ 55-85) within the framework of the Baddeley model, fractionating working memory into a central executive and two slave systems, the phonological…

Nonword Repetition and Language Learning Disorders: A Developmental Contingency Framework

Science.gov (United States)

Snowling, Margaret J.

2006-01-01

In 1990 Gathercole and Baddeley proposed a strong hypothesis that has generated a wealth of research in the field of language development and disorder. The hypothesis was that phonological memory, as indexed by nonword repetition, is causally related to vocabulary development. Support for the hypothesis came from an impressive range of…

Phonological Networks and New Word Learning

Science.gov (United States)

Service, Elisabet

2006-01-01

The first report of a connection between vocabulary learning and phonological short-term memory was published in 1988 (Baddeley, Papagno, & Vallar, 1988). At that time, both Susan Gathercole and I were involved in longitudinal studies, investigating the relation between nonword repetition and language learning. We both found a connection. Now,…

Beyond Words: Phonological Short-Term Memory and Syntactic Impairment in Specific Language Impairment

Science.gov (United States)

Bishop, Dorothy V. M.

2006-01-01

The assessment of nonword repetition in children goes back at least to 1974, when the Goldman-Fristoe-Woodcock Auditory Skills Battery was published, including a subtest (Sound Mimicry) assessing nonword repetition (Goldman, Fristoe, & Woodcock, 1974). Nevertheless, it was not until 20 years later, when Gathercole and Baddeley (1990) reported a…

Commentary on Keynote

Science.gov (United States)

Gray, Shelley

2006-01-01

Our understanding the relationship between verbal short-term memory as indexed by nonword repetition and word learning must now incorporate myriad factors that were not as apparent 17 years ago when Gathercole and Baddeley (1989) proposed that "the phonological memory skills tapped by nonword repetition play a causal role in vocabulary…

Selecting Learning Tasks: Effects of Adaptation and Shared Control on Learning Efficiency and Task Involvement

Science.gov (United States)

Corbalan, Gemma; Kester, Liesbeth; van Merrienboer, Jeroen J. G.

2008-01-01

Complex skill acquisition by performing authentic learning tasks is constrained by limited working memory capacity [Baddeley, A. D. (1992). Working memory. "Science, 255", 556-559]. To prevent cognitive overload, task difficulty and support of each newly selected learning task can be adapted to the learner's competence level and perceived task…

The Development of Working Memory: Further Note on the Comparability of Two Models of Working Memory.

Science.gov (United States)

de Ribaupierre, Anik; Bailleux, Christine

2000-01-01

Summarizes similarities and differences between the working memory models of Pascual-Leone and Baddeley. Debates whether each model makes a specific contribution to explanation of Kemps, De Rammelaere, and Desmet's results. Argues for necessity of theoretical task analyses. Compares a study similar to that of Kemps et al. in which different…

Working Memory Difficulties and Eligibility for K-12 Special Education

Science.gov (United States)

Wilson, Corrie L.

2017-01-01

Working memory (WM) has long been associated with deficiencies in reading. Approximately 35% of students in the United States who receive special education services do so under the category of specific learning disability (SLD). The study's theoretical underpinning was Baddeley's model of WM; previous research revealed a significant literature gap…

The Effects of Split-Attention and Redundancy on Cognitive Load When Learning Cognitive and Psychomotor Tasks

Science.gov (United States)

Pociask, Fredrick D.; Morrison, Gary

2004-01-01

Human working memory can be defined as a component system responsible for the temporary storage and manipulation of information related to higher level cognitive behaviors, such as understanding and reasoning (Baddeley, 1992; Becker & Morris, 1999). Working memory, while able to manage a complex array of cognitive activities, presents with an…

Verbal Short-Term Memory in Individuals with Congenital Articulatory Disorders: New Empirical Data and Review of the Literature

Science.gov (United States)

Carlesimo, G. A.; Galloni, F.; Bonanni, R.; Sabbadini, M.

2006-01-01

Background: To investigate the nature of the articulatory rehearsal mechanism of the Articulatory Loop in Baddeley's Working Memory model, it seems particularly important to study individuals who developed a deficit (dysarthria) or total abolition (anarthria) of the ability to articulate language following a cerebral lesion. Method: In this study,…

Manipulating the Characteristics of Words and Nonwords to Better Understand Word Learning

Science.gov (United States)

Vitevitch, Michael S.

2006-01-01

The work of Susan Gathercole and others on nonword repetition has increased general interest in the relationship between memory and language, and has provided a fertile theoretical framework for researchers to explore how the language system makes use of the phonological loop, a component in Baddeley's (1986) working memory model. Gathercole…

Working Memory Capacity and Language Processes in Children with Specific Language Impairment

Science.gov (United States)

Marton, Klara; Schwartz, Richard G.

2003-01-01

This study examined the interaction between working memory and language comprehension in children with specific language impairment (SLI), focusing on the function of the central executive component and its interaction with the phonological loop (A. D. Baddeley, 1986) in complex working memory tasks. Thirteen children with SLI and 13 age-matched…

A comparative study of the working memory multicomponent model in psychosis and healthy controls.

Science.gov (United States)

Sánchez-Torres, Ana M; Elosúa, M Rosa; Lorente-Omeñaca, Ruth; Moreno-Izco, Lucía; Cuesta, Manuel J

2015-08-01

Working memory deficits are considered nuclear deficits in psychotic disorders. However, research has not found a generalized impairment in all of the components of working memory. We aimed to assess the components of the Baddeley and Hitch working memory model: the temporary systems-the phonological loop, the visuospatial sketchpad and the episodic buffer (introduced later by Baddeley)-and the central executive system, which includes four executive functions: divided attention, updating, shifting and inhibition. We assessed working memory performance in a sample of 21 patients with a psychotic disorder and 21 healthy controls. Patients also underwent a clinical assessment. Both univariate and repeated measures ANOVAs were applied to analyze performance in the working memory components between groups. Patients with a psychotic disorder underperformed compared to the controls in all of the working memory tasks, but after controlling for age and premorbid IQ, we only found a difference in performance in the N-Back task. Repeated measures ANCOVAs showed that patients also underperformed compared to the controls in the Digit span test and the TMT task. Not all of the components of working memory were impaired in the patients. Specifically, patients' performance was impaired in the tasks selected to assess the phonological loop and the shifting executive function. Patients' also showed worse performance than controls in the N-Back task, representative of the updating executive function. However, we did not find higher impairment in the patients' performance respect to controls when increasing the loading of the task. Copyright © 2015 Elsevier Inc. All rights reserved.

Inhibitory processes, working memory, phonological awareness, naming speed, and early arithmetic achievement.

Science.gov (United States)

Navarro, Jose I; Aguilar, Manuel; Alcalde, Concepcion; Ruiz, Gonzalo; Marchena, Esperanza; Menacho, Inmaculada

2011-11-01

This study identified the cognitive processes that underlie the individual differences in early mathematical performance in elementary school children. Taking into account the Baddeley framework multicomponent model, the inhibitory processes, working memory, phonological awareness, and naming speed are considered to be related to early math learning. To examine this relationship, we compared the performance of a total of 424 typically developing middle-class children, aged between 4 and 7 years in a battery of cognitive and early numeric tests: The Utrecht Early Numeracy Test, the Rapid Automatized Naming Test, Spanish version of the Stroop task, the Numeracy Interference Test, Digit Span test, and Phonological Knowledge Test. The mean age of the participants was 72.21 months (sd = 14.8), and 48.6% were male and 51.4% were female. The results demonstrated that children performing worst on central executive, phonological processing, and inhibitory processes showed lower results in early mathematical tasks measured by The Utrecht Early Numeracy Test. Results supported the notion that the executive system is an important predictor of children's mathematical performance.

A Common Neural Substrate for Language Production and Verbal Working Memory

Science.gov (United States)

Acheson, Daniel J.; Hamidi, Massihullah; Binder, Jeffrey R.; Postle, Bradley R.

2011-01-01

Verbal working memory (VWM), the ability to maintain and manipulate representations of speech sounds over short periods, is held by some influential models to be independent from the systems responsible for language production and comprehension [e.g., Baddeley, A. D. "Working memory, thought, and action." New York, NY: Oxford University Press,…

What Limits Working Memory Capacity? Evidence for Modality-Specific Sources to the Simultaneous Storage of Visual and Auditory Arrays

Science.gov (United States)

Fougnie, Daryl; Marois, Rene

2011-01-01

There is considerable debate on whether working memory (WM) storage is mediated by distinct subsystems for auditory and visual stimuli (Baddeley, 1986) or whether it is constrained by a single, central capacity-limited system (Cowan, 2006). Recent studies have addressed this issue by measuring the dual-task cost during the concurrent storage of…

Identifying Learning Patterns of Children at Risk for Specific Reading Disability

Science.gov (United States)

Barbot, Baptiste; Krivulskaya, Suzanna; Hein, Sascha; Reich, Jodi; Thuma, Philip E.; Grigorenko, Elena L.

2016-01-01

Differences in learning patterns of vocabulary acquisition in children at risk (+SRD) and not at risk (-SRD) for Specific Reading Disability (SRD) were examined using a microdevelopmental paradigm applied to the multi-trial Foreign Language Learning Task (FLLT; Baddeley et al., 1995). The FLLT was administered to 905 children from rural…

Righting errors in writing errors: the Wing and Baddeley (1980) spelling error corpus revisited.

Science.gov (United States)

Wing, Alan M; Baddeley, Alan D

2009-03-01

We present a new analysis of our previously published corpus of handwriting errors (slips) using the proportional allocation algorithm of Machtynger and Shallice (2009). As previously, the proportion of slips is greater in the middle of the word than at the ends, however, in contrast to before, the proportion is greater at the end than at the beginning of the word. The findings are consistent with the hypothesis of memory effects in a graphemic output buffer.

Examining the Relationship between Immediate Serial Recall and Immediate Free Recall: Common Effects of Phonological Loop Variables but Only Limited Evidence for the Phonological Loop

Science.gov (United States)

Spurgeon, Jessica; Ward, Geoff; Matthews, William J.

2014-01-01

We examined the contribution of the phonological loop to immediate free recall (IFR) and immediate serial recall (ISR) of lists of between one and 15 words. Following Baddeley (1986, 2000, 2007, 2012), we assumed that visual words could be recoded into the phonological store when presented silently but that recoding would be prevented by…

Phonological Working Memory in German Children with Poor Reading and Spelling Abilities

Science.gov (United States)

Steinbrink, Claudia; Klatte, Maria

2008-01-01

Deficits in verbal short-term memory have been identified as one factor underlying reading and spelling disorders. However, the nature of this deficit is still unclear. It has been proposed that poor readers make less use of phonological coding, especially if the task can be solved through visual strategies. In the framework of Baddeley's…

Attention, Working Memory, and Long-Term Memory in Multimedia Learning: An Integrated Perspective Based on Process Models of Working Memory

Science.gov (United States)

Schweppe, Judith; Rummer, Ralf

2014-01-01

Cognitive models of multimedia learning such as the Cognitive Theory of Multimedia Learning (Mayer 2009) or the Cognitive Load Theory (Sweller 1999) are based on different cognitive models of working memory (e.g., Baddeley 1986) and long-term memory. The current paper describes a working memory model that has recently gained popularity in basic…

Predictors of Verbal Working Memory in Children with Cerebral Palsy

Science.gov (United States)

Peeters, Marieke; Verhoeven, Ludo; de Moor, Jan

2009-01-01

The goal of the present study was to examine the precursors of verbal working memory in 52 children with cerebral palsy with varying degrees of speech impairments in the first grade of special education. Following Baddeley's model of working memory, children's verbal working memory was measured by means of a forced-recognition task. As precursors…

Working Memory Development in Children with Mild to Borderline Intellectual Disabilities

Science.gov (United States)

Van der Molen, M. J.; Henry, L. A.; Van Luit, J. E. H.

2014-01-01

Background: The purpose of the current cross-sectional study was to examine the developmental progression in working memory (WM) between the ages of 9 and 16 years in a large sample of children with mild to borderline intellectual disabilities (MBID). Baddeley's influential WM model was used as a theoretical framework. Furthermore, the…

Sentence Memory of Individuals with Down's Syndrome and Typically Developing Children

Science.gov (United States)

Seung, H.-K.; Chapman, R.

2004-01-01

Individuals with Down's syndrome (DS) have an auditory short-term memory span disproportionately shorter than the non-verbal mental age (MA). This study evaluated the Baddeley model's claim that verbal short-term memory deficits might arise from slower speaking rates (and thus less material rehearsed in a 2 s passive store) by using the sentence…

The Structure of Working Memory from 4 to 15 Years of Age

Science.gov (United States)

Gathercole, Susan E.; Pickering, Susan J.; Ambridge, Benjamin; Wearing, Hannah

2004-01-01

The structure of working memory and its development across the childhood years were investigated in children 4-15 years of age. The children were given multiple assessments of each component of the A. D. Baddeley and G. Hitch (1974) working memory model. Broadly similar linear functions characterized performance on all measures as a function of…

The Limits of Visual Working Memory in Children: Exploring Prioritization and Recency Effects with Sequential Presentation

Science.gov (United States)

Berry, Ed D. J.; Waterman, Amanda H.; Baddeley, Alan D.; Hitch, Graham J.; Allen, Richard J.

2018-01-01

Recent research has demonstrated that, when instructed to prioritize a serial position in visual working memory (WM), adults are able to boost performance for this selected item, at a cost to nonprioritized items (e.g., Hu, Hitch, Baddeley, Zhang, & Allen, 2014). While executive control appears to play an important role in this ability, the…

The Effect of Dual N-Back Task Training on Phonological Memory Expansion in Adult EFL Learners at the Beginner Level

Science.gov (United States)

Farvardin, Mohammad Taghi; Afghari, Akbar; Koosha, Mansour

2014-01-01

One of the most influential models of working memory (WM) is the one developed by Baddeley (1986, 2000, 2003) which views WM comprising several components--a central executive, an episodic buffer, the visuo-spatial sketchpad, and the phonological loop. The phonological loop or phonological memory (PM) deals with the temporary storage of verbal and…

Short-Term Memory, Executive Control, and Children's Route Learning

Science.gov (United States)

Purser, Harry R. M.; Farran, Emily K.; Courbois, Yannick; Lemahieu, Axelle; Mellier, Daniel; Sockeel, Pascal; Blades, Mark

2012-01-01

The aim of this study was to investigate route-learning ability in 67 children aged 5 to 11 years and to relate route-learning performance to the components of Baddeley's model of working memory. Children carried out tasks that included measures of verbal and visuospatial short-term memory and executive control and also measures of verbal and…

Does the Modality Effect Exist? And if so, Which Modality Effect?

Science.gov (United States)

Reinwein, Joachim

2012-01-01

The modality effect is a central issue in multimedia learning [see Mayer (Cambridge University Press, 2005a), for a review]. Sweller's Cognitive Load Theory (CLT), for example, presumes that an illustrated text is better understood when presented visually rather than orally. The predictive power of CLT lies in how it links in to Baddeley's (1986)…

On the Validity of Working Memory Measures for Elementary School Children.

Science.gov (United States)

Morra, Sergio; Scopesi, Alda

The literature on the measurement of working memory is discussed, with emphasis on the validity of such measurement with elementary school students. Approaches by J. Pascual-Leone, R. Case, A. D. Baddeley, and C. Hulme are considered. An experimental study is presented, in which 100 boys and 91 girls (aged from 6 years to 10 years 11 months) were…

Interference in memory for tonal pitch: implications for a working-memory model.

Science.gov (United States)

Pechmann, T; Mohr, G

1992-05-01

The degree of interference caused by different kinds of stimuli on memory for tonal pitch was studied. Musically trained and untrained subjects heard a sequence of two tones separated by an interval of 5 sec. The tones were either identical in pitch or differed by a semitone. Subjects had to decide whether the tones were identical or not. The interval was filled with tonal, verbal, or visual material under attended and unattended conditions. The results revealed clear group differences. Musically trained subjects' retention of the first test tone was only affected by the interposition of other tones. In contrast, the performance of musically untrained subjects was also affected by verbal and visual items. The findings are discussed in the framework of Baddeley's (1986) working-memory model.

Individual differences in working memory capacity predict visual attention allocation.

Science.gov (United States)

Bleckley, M Kathryn; Durso, Francis T; Crutchfield, Jerry M; Engle, Randall W; Khanna, Maya M

2003-12-01

To the extent that individual differences in working memory capacity (WMC) reflect differences in attention (Baddeley, 1993; Engle, Kane, & Tuholski, 1999), differences in WMC should predict performance on visual attention tasks. Individuals who scored in the upper and lower quartiles on the OSPAN working memory test performed a modification of Egly and Homa's (1984) selective attention task. In this task, the participants identified a central letter and localized a displaced letter flashed somewhere on one of three concentric rings. When the displaced letter occurred closer to fixation than the cue implied, high-WMC, but not low-WMC, individuals showed a cost in the letter localization task. This suggests that low-WMC participants allocated attention as a spotlight, whereas those with high WMC showed flexible allocation.

How checking breeds doubt: reduced performance in a simple working memory task.

Science.gov (United States)

Harkin, Ben; Kessler, Klaus

2009-06-01

A paradox of memory research is that repeated checking results in a decrease in memory certainty, memory vividness and confidence [van den Hout, M. A., & Kindt, M. (2003a). Phenomenological validity of an OCD-memory model and the remember/know distinction. Behaviour Research and Therapy, 41, 369-378; van den Hout, M. A., & Kindt, M. (2003b). Repeated checking causes memory distrust. Behaviour Research and Therapy, 41, 301-316]. Although these findings have been mainly attributed to changes in episodic long-term memory, it has been suggested [Shimamura, A. P. (2000). Toward a cognitive neuroscience of metacognition. Consciousness and Cognition, 9, 313-323] that representations in working memory could already suffer from detrimental checking. In two experiments we set out to test this hypothesis by employing a delayed-match-to-sample working memory task. Letters had to be remembered in their correct locations, a task that was designed to engage the episodic short-term buffer of working memory [Baddeley, A. D. (2000). The episodic buffer: a new component in working memory? Trends in Cognitive Sciences, 4, 417-423]. Of most importance, we introduced an intermediate distractor question that was prone to induce frustrating and unnecessary checking on trials where no correct answer was possible. Reaction times and confidence ratings on the actual memory test of these trials confirmed the success of this manipulation. Most importantly, high checkers [cf. VOCI; Thordarson, D. S., Radomsky, A. S., Rachman, S., Shafran, R, Sawchuk, C. N., & Hakstian, A. R. (2004). The Vancouver obsessional compulsive inventory (VOCI). Behaviour Research and Therapy, 42(11), 1289-1314] were less accurate than low checkers when frustrating checking was induced, especially if the experimental context actually emphasized the irrelevance of the misleading question. The clinical relevance of this result was substantiated by means of an extreme groups comparison across the two studies. The findings

Feature binding and attention in working memory: a resolution of previous contradictory findings.

Science.gov (United States)

Allen, Richard J; Hitch, Graham J; Mate, Judit; Baddeley, Alan D

2012-01-01

We aimed to resolve an apparent contradiction between previous experiments from different laboratories, using dual-task methodology to compare effects of a concurrent executive load on immediate recognition memory for colours or shapes of items or their colour-shape combinations. Results of two experiments confirmed previous evidence that an irrelevant attentional load interferes equally with memory for features and memory for feature bindings. Detailed analyses suggested that previous contradictory evidence arose from limitations in the way recognition memory was measured. The present findings are inconsistent with an earlier suggestion that feature binding takes place within a multimodal episodic buffer Baddeley, ( 2000 ) and support a subsequent account in which binding takes place automatically prior to information entering the episodic buffer Baddeley, Allen, & Hitch, ( 2011 ). Methodologically, the results suggest that different measures of recognition memory performance (A', d', corrected recognition) give a converging picture of main effects, but are less consistent in detecting interactions. We suggest that this limitation on the reliability of measuring recognition should be taken into account in future research so as to avoid problems of replication that turn out to be more apparent than real.

Insights on Information Absorption and Transmission Rates in C2I Settings

Science.gov (United States)

1985-09-01

Development Activity, Ft Leavenworth, KS, 1978. Craik , F.I.M., and Lockhart , R.S. Levels of processing : A framework for memory research. Journal of Verbal... Craik & Lockhart , 1972; Baddeley, 1978). However, the idea is that the resulting information is relegated to central processing and thereby brought to...SYSTEM 9 ambient conditions: * luminence level , legibility t2 Information Processing : e training decoding, translating/trans- USER 0 experience scribing

[A design of refractometer based on blur circle].

Science.gov (United States)

Zhang, Yikui; Huang, Shenghai; Ye, Huifang; Zou, Ruitao; Tong, Gengmin; Zhuo, Ran

2011-03-01

Design a convenient and stable eye refractometer based on the theory of blur circle. Analyze the retinal blur circle in both Emsly reduced eye model and Liou & Brennan 1997 eye model by ZEMAX. Design the coefficients including PD (pupil diameter) and NO' (length between node point and fovea) with the purpose of improving the accuracy. At last, compare the clinical optometry data from this refractor with the data obtained from optometry hospital in Wenzhou. The blur circle diameters are nearly the same in both reduced eye model and the Liou & Brennan 1997 eye model. With the PD = 4 mm and NO' = 20 mm, the refractor shows a fine accuracy in optometry. The paired t test shows that the myopia group and the astigmatism axial direction group have no statistical difference between the data from the blur circle refractor and the hospital (P > 0.05), while the astigmatism degree group has the result of P = 0.41 which may be caused by the poor cooperation of pediatric patients. 80% of the astigmatism degree data differ from the data from the hospital in less than 0.75D. The blur circle refractor, with the features of convenience and fine accuracy, is promised to be a new style of refractometer in the future.

Automatic and controlled processing in sentence recall: The role of long-term and working memory

OpenAIRE

Jefferies, Elizabeth; Lambon Ralph, Matthew A.; Baddeley, Alan D.

2004-01-01

Immediate serial recall is better for sentences than word lists presumably because of the additional support that meaningful material receives from long-term memory. This may occur automatically, without the involvement of attention, or may require additional attentionally demanding processing. For example, the episodic buffer model (Baddeley, 2000) proposes that the executive component of working memory plays a crucial role in the formation of links between different representational formats...

The Two-Store Model of Memory: Past Criticisms, Current Status, and Future Directions (Het Twee-Stadia Model van het Geheugen: Terugblik, Huidige Status en Toekomstige Ontwikkelingen)

Science.gov (United States)

1990-06-01

levels -of- processing " ( Craik & Lockhart , 1972) en de "working memory" (Baddeley & Hitch, 1974) benaderingen deze verschijnselen beter...of storing information in LTS. 2.2 The levels -of- processing framework Craik and Lockhart (1972), in a very influential paper, proposed what they...Cognitive theory. (Vol. 1). (pp. 151-171). Hillsdale, N.J.: Erlbaum. Craik , F.l.M & Lockhart , R.S. (1972). Levels of processing : A frame- work

Short-term memory impairment and arithmetical ability.

Science.gov (United States)

Butterworth, B; Cipolotti, L; Warrington, E K

1996-02-01

We document the dissociation of preserved calculation skills in a patient with impaired auditory short-term memory. The patient (MRF) had a memory span of three digits. Furthermore, he showed rapid decrement in performance of single digits and letters with both auditory and visual presentation in the Brown-Peterson forgetting task. Analysis of his calculation skills revealed a normal ability to solve auditorily presented multidigit addition and subtraction problems such as 173 + 68 and to execute the Paced Auditory Serial Addition Task (Sampson, 1956, 1958; Gronwall, 1977). In addition, his performance on other tests, including arithmetic manipulation of natural numbers, decimals and fractions, approximation, magnitude, ratio, and percentage, appeared to be normal (Hitch, 1978b). It is argued that these findings require a revision of Baddeley and Hitch's (1974) concept of the function of working memory.

Working memory deficits in children with specific learning disorders.

Science.gov (United States)

Schuchardt, Kirsten; Maehler, Claudia; Hasselhorn, Marcus

2008-01-01

This article examines working memory functioning in children with specific developmental disorders of scholastic skills as defined by ICD-10. Ninety-seven second to fourth graders with a minimum IQ of 80 are compared using a 2 x 2 factorial (dyscalculia vs. no dyscalculia; dyslexia vs. no dyslexia) design. An extensive test battery assesses the three subcomponents of working memory described by Baddeley (1986): phonological loop, visual-spatial sketchpad, and central executive. Children with dyscalculia show deficits in visual-spatial memory; children with dyslexia show deficits in phonological and central executive functioning. When controlling for the influence of the phonological loop on the performance of the central executive, however, the effect is no longer significant. Although children with both reading and arithmetic disorders are consistently outperformed by all other groups, there is no significant interaction between the factors dyscalculia and dyslexia.

Fractionating the neural correlates of individual working memory components underlying arithmetic problem solving skills in children

Science.gov (United States)

Metcalfe, Arron W. S.; Ashkenazi, Sarit; Rosenberg-Lee, Miriam; Menon, Vinod

2013-01-01

Baddeley and Hitch’s multi-component working memory (WM) model has played an enduring and influential role in our understanding of cognitive abilities. Very little is known, however, about the neural basis of this multi-component WM model and the differential role each component plays in mediating arithmetic problem solving abilities in children. Here, we investigate the neural basis of the central executive (CE), phonological (PL) and visuo-spatial (VS) components of WM during a demanding mental arithmetic task in 7–9 year old children (N=74). The VS component was the strongest predictor of math ability in children and was associated with increased arithmetic complexity-related responses in left dorsolateral and right ventrolateral prefrontal cortices as well as bilateral intra-parietal sulcus and supramarginal gyrus in posterior parietal cortex. Critically, VS, CE and PL abilities were associated with largely distinct patterns of brain response. Overlap between VS and CE components was observed in left supramarginal gyrus and no overlap was observed between VS and PL components. Our findings point to a central role of visuo-spatial WM during arithmetic problem-solving in young grade-school children and highlight the usefulness of the multi-component Baddeley and Hitch WM model in fractionating the neural correlates of arithmetic problem solving during development. PMID:24212504

The Case against Secondary Task Analyses of Mental Workload.

Science.gov (United States)

1980-01-10

different attributes of one object (e.g., its color, form and size) than one attribute of three objects (e.g., red, green and blue or square, circle and...RED printed in colored ink, e.g. green . The subjecc is instructed to report the ink color, ignoring the color word. This is quite difficult for most...Directions in Cognitive Psycholoz. London: Routledge & Kegan Paul (in press). Baddeley, A. D. The capacity for generating information by randomization

The relationship between working memory and L2 reading comprehension

Directory of Open Access Journals (Sweden)

Mohammadtaghi Shahnazari-Dorcheh

2014-08-01

Full Text Available Since an important role for working memory has been found in the first language acquisition (e.g., Daneman, 1991 Daneman & Green, 1986 Waters & Caplan, 1996, research on the role of working memory is emerging as an area of concern for second language acquisition (e.g., Atkins & Baddeley, 1998 Miyake & Freidman, 1998 Robinson, 1995, 2002, 2005. The present study focused on the role of working memory capacity in the development of second language reading ability. 55 L1 Persian EFL learners at three proficiency levels from a private language school participated in this study. They completed a battery of reading and working memory measures. Memory measures included phonological short-term memory, and reading span test (RST. Reading measures included two expository reading comprehension tests. Multiple regression analysis was applied to determine whether there are any significant relationships between working memory capacity and reading measures. Results of this study indicated a significant relationship between working memory capacity (as measured by RST and reading ability at lower levels of proficiency.

What limits dual-tasking in working memory? An investigation of the effect of sub-task demand on maintenance mechanisms employed during dual-tasking

OpenAIRE

Doherty, Jason Michael

2016-01-01

A number of models of working memory have been proposed since the seminal work of Baddeley and Hitch (1974) on the Multiple Component Model (MCM). Subsequent MCM research focussed on developing a theoretical framework based on modality-specific stores that can operate in parallel during dual-tasking. The MCM can be contrasted with theories of working memory that assume an attention-based domain-general shared resource responsible for both short term retention as well as on-line...

The role of consciousness in the phonological loop: hidden in plain sight

OpenAIRE

Buchsbaum, Bradley R.

2013-01-01

We know from everyday experience that when we need to keep a small amount of verbal information “in mind” for a short period, an effective cognitive strategy is to silently rehearse the words. This basic cognitive strategy has been elegantly codified in Baddeley and colleagues model of verbal working memory, the phonological loop. Here we explore how the intuitive appeal of the phonological loop is grounded in the phenomenological experience of subvocal rehearsal as consisting of an interacti...

Fractionating the neural correlates of individual working memory components underlying arithmetic problem solving skills in children.

Science.gov (United States)

Metcalfe, Arron W S; Ashkenazi, Sarit; Rosenberg-Lee, Miriam; Menon, Vinod

2013-10-01

Baddeley and Hitch's multi-component working memory (WM) model has played an enduring and influential role in our understanding of cognitive abilities. Very little is known, however, about the neural basis of this multi-component WM model and the differential role each component plays in mediating arithmetic problem solving abilities in children. Here, we investigate the neural basis of the central executive (CE), phonological (PL) and visuo-spatial (VS) components of WM during a demanding mental arithmetic task in 7-9 year old children (N=74). The VS component was the strongest predictor of math ability in children and was associated with increased arithmetic complexity-related responses in left dorsolateral and right ventrolateral prefrontal cortices as well as bilateral intra-parietal sulcus and supramarginal gyrus in posterior parietal cortex. Critically, VS, CE and PL abilities were associated with largely distinct patterns of brain response. Overlap between VS and CE components was observed in left supramarginal gyrus and no overlap was observed between VS and PL components. Our findings point to a central role of visuo-spatial WM during arithmetic problem-solving in young grade-school children and highlight the usefulness of the multi-component Baddeley and Hitch WM model in fractionating the neural correlates of arithmetic problem solving during development. Copyright © 2013 Elsevier Ltd. All rights reserved.

Anatomy of the Episodic Buffer: A Voxel-Based Morphometry Study in Patients with Dementia

Directory of Open Access Journals (Sweden)

M. Berlingeri

2008-01-01

Full Text Available In 2000 Baddeley proposed the existence of a new component of working memory, the episodic buffer, which should contribute to the on-line maintenance of integrated memory traces. The author assumed that this component should be critical for immediate recall of a short story that exceeds the capacity of the phonological store. Accordingly, patients with Alzheimer’s dementia (AD should suffer of a deficit of the episodic buffer when immediate recall of a short story is impossible. On the other hand, the episodic buffer should be somewhat preserved in such patients when some IR can occur (Baddeley and Wilson, 2002. We adopted this logic for a voxel-based morphometry study. We compared the distribution of grey-matter density of two such groups of AD patients with a group of age-matched controls. We found that both AD groups had a significant atrophy of the left mid-hippocampus; on the other hand, the anterior part of the hippocampus was significantly more atrophic in patients who were also impaired on the immediate prose recall task. Six out of ten patients with no immediate recall were spared at “central executive” tasks. Taken together our findings suggest that the left anterior hippocampus contributes to the episodic buffer of the revised working memory model. We also suggest that the episodic buffer is somewhat independent from the central executive component of working memory.

Short-term memory, executive control, and children's route learning

OpenAIRE

Purser, H. R.; Farran, E. K.; Courbois, Y.; Lemahieu, A.; Mellier, D.; Sockeel, P.; Blades, M.

2012-01-01

The aim of this study was to investigate route-learning ability in 67 children aged 5 to 11years and to relate route-learning performance to the components of Baddeley's model of working memory. Children carried out tasks that included measures of verbal and visuospatial short-term memory and executive control and also measures of verbal and visuospatial long-term memory; the route-learning task was conducted using a maze in a virtual environment. In contrast to previous research, correlation...

Slow wave maturation on a visual working memory task.

Science.gov (United States)

Barriga-Paulino, Catarina I; Rodríguez-Martínez, Elena I; Rojas-Benjumea, Ma Ángeles; Gómez, Carlos M

2014-07-01

The purpose of the present study is to analyze how the Slow Wave develops in the retention period on a visual Delayed Match-to-Sample task performed by 170 subjects between 6 and 26 years old, divided into 5 age groups. In addition, a neuropsychological test (Working Memory Test Battery for Children) was correlated with this Event Related Potential (ERP) in order to observe possible relationships between Slow Wave maturation and the components of Baddeley and Hitch's Working Memory model. The results showed a slow negativity during the retention period in the posterior region in all the age groups, possibly resulting from sustained neural activity related to the visual item presented. In the anterior region, a positive slow wave was observed in the youngest subjects. Dipole analysis suggests that this fronto-central positivity in children (6-13 years old) consists of the positive side of the posterior negativity, once these subjects only needed two posterior dipoles to explain almost all the neural activity. Negative correlations were shown between the Slow Wave and the Working Memory Test Battery for Children, indicating a commonality in assessing Working Memory with the Slow Wave and the neuropsychological testing. Copyright © 2014 Elsevier Inc. All rights reserved.

Measurements and modeling of total solar irradiance in X-class solar flares

International Nuclear Information System (INIS)

Moore, Christopher Samuel; Chamberlin, Phillip Clyde; Hock, Rachel

2014-01-01

The Total Irradiance Monitor (TIM) from NASA's SOlar Radiation and Climate Experiment can detect changes in the total solar irradiance (TSI) to a precision of 2 ppm, allowing observations of variations due to the largest X-class solar flares for the first time. Presented here is a robust algorithm for determining the radiative output in the TIM TSI measurements, in both the impulsive and gradual phases, for the four solar flares presented in Woods et al., as well as an additional flare measured on 2006 December 6. The radiative outputs for both phases of these five flares are then compared to the vacuum ultraviolet (VUV) irradiance output from the Flare Irradiance Spectral Model (FISM) in order to derive an empirical relationship between the FISM VUV model and the TIM TSI data output to estimate the TSI radiative output for eight other X-class flares. This model provides the basis for the bolometric energy estimates for the solar flares analyzed in the Emslie et al. study.

On the law relating processing to storage in working memory.

Science.gov (United States)

Barrouillet, Pierre; Portrat, Sophie; Camos, Valérie

2011-04-01

Working memory is usually defined in cognitive psychology as a system devoted to the simultaneous processing and maintenance of information. However, although many models of working memory have been put forward during the last decades, they often leave underspecified the dynamic interplay between processing and storage. Moreover, the account of their interaction proposed by the most popular A. D. Baddeley and G. Hitch's (1974) multiple-component model is contradicted by facts, leaving unresolved one of the main issues of cognitive functioning. In this article, the author derive from the time-based resource-sharing model of working memory a mathematical function relating the cognitive load involved by concurrent processing to the amount of information that can be simultaneously maintained active in working memory. A meta-analysis from several experiments testing the effects of processing on storage corroborates the parameters of the predicted function, suggesting that it properly reflects the law relating the 2 functions of working memory. 2011 APA, all rights reserved

Relación entre la memoria operativa y el cálculo mental con los números naturales en estudiantes del grado 8º del Instituto Técnico Mercedes Abrego de San José de Cúcuta.

Directory of Open Access Journals (Sweden)

Rosa Virginia Hernández

2014-01-01

Full Text Available Throughout the twentieth century and the twenty-first in the field of mathematics, has been a stream of authors and scientists have been interested in the how and why of how the human brain; and even if the information within the mind is processed. For this reason; The following article aims to analyze the possible relationship between working memory corresponding to that proposed by Baddeley and Hitch (1974 model of memory and mental arithmetic with natural numbers eighth graders (8th by applying a descriptive correlational methodology character quasi experimental based on an associative, constructivist theoretical approach with studies of working memory proposed by Baddely and Hitch (2003. The instrument used was the memory test battery of Employment, Pickering, Gathercole and Bouquets. Medium and a linearly significant relationship between mental arithmetic tasks and the phonological loop was found; also a good inclination to remember the digits and a lower proportion of pseudo words it shows.

Working memory as separable subsystems: a study with Portuguese primary school children.

Science.gov (United States)

Campos, Isabel S; Almeida, Leandro S; Ferreira, Aristides I; Martinez, Luis F

2013-01-01

Although much research has been done to study the working memory structure in children in their first school years, the relation of cognitive constructs involved in this process remains uncertain. In particular, it is unclear whether working memory is a domain general construct that coordinates separate codes of verbal and visuospatial storage or whether it is a domain-specific construct with distinct resources of verbal and visuospatial information. This paper investigates the structure of working memory, by using the Working Memory Test Battery for Children (WMTB-C) and by doing confirmatory factor analyses (CFAs) on a sample of Portuguese children (n = 103) between 8 and 9 years of age. The results of the confirmatory factor analyses that provide the best fit of the data correspond to the model that includes Central Executive and Visuospatial Sketchpad in the same factor, co-varying with a Phonological Loop factor. Moreover, the traditional working memory tripartite structure--based on the Baddeley and Hitch Model--revealed good fit to the data.

Meta-analysis of the research impact of Baddeley’s multicomponent working memory model and Cowan’s embedded-processes model of working memory: A bibliometric mapping approach

Directory of Open Access Journals (Sweden)

Gruszka Aleksandra

2016-04-01

Full Text Available In this study bibliometric mapping method was employed to visualise the current research trends and the impact of the two most influential models of working memory, namely: A. D. Baddeley and G. J. Hitch’s (1974 multicomponent working memory model and N. Cowan’s (1988 embedded-processes model of working memory. Using VOSviewer software two maps were generated based on the index-term words extracted from the research papers citing Baddeley (2000 and Cowan (2001, respectively. The maps represent networks of co-occurrences of index terms and can be interpreted as an indication of the main research fields related to the examined models of WM. The results of the analysis revealed that the spheres of influence of the two main conceptualisations of WM are rather different than similar. Although the first two clusters, i.e. “brain mapping” and “higher-level cognition and development” are present in both maps, their relative importance varies. The remaining clusters are unique to each map. Baddeley’s theory seems to have a greater influence on “neuropsychology”, while Cowan’s theory - on basic research on “biological systems”, including the nervous system in humans and animals. The second difference between these theories concerns their relations to functions and dysfunctions associated with particular sensory modalities: in Baddelay’s theory with the “auditory modality” cluster, and in Cowan’s - with the “visual modality” one.

Working Memory Structure in Children: Comparing Different Models During Childhood (Estructura de la Memoria Operativa: Comparando diferentes modelos en la infancia

Directory of Open Access Journals (Sweden)

Irene Injoque-Ricle

2012-08-01

Full Text Available Working Memory (WM is an active memory system responsible for the temporary storage and concurrent processing of information. Different authors have considered WM as a complex but unitary system, whereas others have suggested that the system is multidimensional. In this line, the model developed by Baddeley and Hitch (1974 is one of the most well known; it proposes two modality-specific components - the phonological loop and the visuo-spatial sketchpad - and a supervisory executive system - the central executive. This paper contributes to the debate on WM structure by investigating three groups of children of different ages and assessing different models using confirmatory factor analysis. The Working Memory Assessment Battery Test (Alloway, 2007; Injoque-Ricle, Calero, Alloway & Burin, 2011 was administered to 180 monolingual Spanish-speaking children. The three age groups consisted of 6-, 8-, and 11-year-old children (n = 60 participants per group. The results suggest that the WM structure is not uniform across the different age groups tested, showing progressive differentiation and specialization during childhood. This structure would appear to form between the ages of 6 and 8 years and become more complex as adolescence is approached.

Longitudinal data on cortical thickness before and after working memory training

Directory of Open Access Journals (Sweden)

Claudia Metzler-Baddeley

2016-06-01

Full Text Available The data and supplementary information provided in this article relate to our research article “Task complexity and location specific changes of cortical thickness in executive and salience networks after working memory training” (Metzler-Baddeley et al., 2016 [1]. We provide cortical thickness and subcortical volume data derived from parieto-frontal cortical regions and the basal ganglia with the FreeSurfer longitudinal analyses stream (http://surfer.nmr.mgh.harvard.edu [2] before and after Cogmed working memory training (Cogmed and Cogmed Working Memory Training, 2012 [3]. This article also provides supplementary information to the research article, i.e., within-group comparisons between baseline and outcome cortical thickness and subcortical volume measures, between-group tests of performance changes in cognitive benchmark tests (www.cambridgebrainsciences.com [4], correlation analyses between performance changes in benchmark tests and training-related structural changes, correlation analyses between the time spent training and structural changes, a scatterplot of the relationship between cortical thickness measures derived from the occipital lobe as control region and the chronological order of the MRI sessions to assess potential scanner drift effects and a post-hoc vertex-wise whole brain analysis with FreeSurfer Qdec (https://surfer.nmr.mgh.harvard.edu/fswiki/Qdec [5].

Longitudinal data on cortical thickness before and after working memory training.

Science.gov (United States)

Metzler-Baddeley, Claudia; Caeyenberghs, Karen; Foley, Sonya; Jones, Derek K

2016-06-01

The data and supplementary information provided in this article relate to our research article "Task complexity and location specific changes of cortical thickness in executive and salience networks after working memory training" (Metzler-Baddeley et al., 2016) [1]. We provide cortical thickness and subcortical volume data derived from parieto-frontal cortical regions and the basal ganglia with the FreeSurfer longitudinal analyses stream (http://surfer.nmr.mgh.harvard.edu [2]) before and after Cogmed working memory training (Cogmed and Cogmed Working Memory Training, 2012) [3]. This article also provides supplementary information to the research article, i.e., within-group comparisons between baseline and outcome cortical thickness and subcortical volume measures, between-group tests of performance changes in cognitive benchmark tests (www.cambridgebrainsciences.com [4]), correlation analyses between performance changes in benchmark tests and training-related structural changes, correlation analyses between the time spent training and structural changes, a scatterplot of the relationship between cortical thickness measures derived from the occipital lobe as control region and the chronological order of the MRI sessions to assess potential scanner drift effects and a post-hoc vertex-wise whole brain analysis with FreeSurfer Qdec (https://surfer.nmr.mgh.harvard.edu/fswiki/Qdec [5]).

Lenguaje expresivo y memoria verbal a corto plazo u operativa (working memory) en las personas con síndrome de Down

OpenAIRE

Fernández Olaria, Roser; Gràcia García, Marta

2013-01-01

Para aportar nuevos elementos que ayuden a entender la gran variabilidad de las personas con síndrome de Down en su capacidad de expresión verbal, el estudio analiza la relación entre su lenguaje expresivo verbal y su capacidad de memoria verbal a corto plazo u operativa (working memory). Puesto que estas personas muestran un peor rendimiento en memoria verbal a corto plazo que los demás grupos de población con y sin discapacidad, siguiendo el modelo de memoria operativa de Baddeley, hemos an...

EL SISTEMA ATENCIONAL SUPERVISOR Y LA TEORÍA ELIMINATIVISTA O EL PROBLEMA DE LA VOLUNTAD -- THE SUPERVISORY ATTENTIONAL SYSTEM AND THE ELIMINATIVISM OR THE PROBLEM OF THE WILL

Directory of Open Access Journals (Sweden)

LEONARDO FRANCISCO BARÓN BIRCHENALL

2008-06-01

Full Text Available The model of working memory by Alan Baddeley (that includes the Supervisory Attention System and the eliminativist arguments by Richard Rorty, are both related to cognitive psychology, present distinct and unequal conceptions regarding to the human will and capacity to decide. In this article are drawn the two theories, and reflect to the nature and of its contradiction. Besides there is a possible fundamental methodical basis for the study of the will, based in one of the most well-known cases in neuropsychological study, the one of the amnesic patient H.M.

What limits working memory capacity? Evidence for modality-specific sources to the simultaneous storage of visual and auditory arrays.

Science.gov (United States)

Fougnie, Daryl; Marois, René

2011-11-01

There is considerable debate on whether working memory (WM) storage is mediated by distinct subsystems for auditory and visual stimuli (Baddeley, 1986) or whether it is constrained by a single, central capacity-limited system (Cowan, 2006). Recent studies have addressed this issue by measuring the dual-task cost during the concurrent storage of auditory and visual arrays (e.g., Cocchini, Logie, Della Sala, MacPherson, & Baddeley, 2002; Fougnie & Marois, 2006; Saults & Cowan, 2007). However, studies have yielded widely different dual-task costs, which have been taken to support both modality-specific and central capacity-limit accounts of WM storage. Here, we demonstrate that the controversies regarding such costs mostly stem from how these costs are measured. Measures that compare combined dual-task capacity with the higher single-task capacity support a single, central WM store when there is a large disparity between the single-task capacities (Experiment 1) but not when the single-task capacities are well equated (Experiment 2). In contrast, measures of the dual-task cost that normalize for differences in single-task capacity reveal evidence for modality-specific stores, regardless of single-task performance. Moreover, these normalized measures indicate that dual-task cost is much smaller if the tasks do not involve maintaining bound feature representations in WM (Experiment 3). Taken together, these experiments not only resolve a discrepancy in the field and clarify how to assess the dual-task cost but also indicate that WM capacity can be constrained both by modality-specific and modality-independent sources of information processing.

A fast-multipole domain decomposition integral equation solver for characterizing electromagnetic wave propagation in mine environments

KAUST Repository

Yücel, Abdulkadir C.

2013-07-01

Reliable and effective wireless communication and tracking systems in mine environments are key to ensure miners\\' productivity and safety during routine operations and catastrophic events. The design of such systems greatly benefits from simulation tools capable of analyzing electromagnetic (EM) wave propagation in long mine tunnels and large mine galleries. Existing simulation tools for analyzing EM wave propagation in such environments employ modal decompositions (Emslie et. al., IEEE Trans. Antennas Propag., 23, 192-205, 1975), ray-tracing techniques (Zhang, IEEE Tran. Vehic. Tech., 5, 1308-1314, 2003), and full wave methods. Modal approaches and ray-tracing techniques cannot accurately account for the presence of miners and their equipments, as well as wall roughness (especially when the latter is comparable to the wavelength). Full-wave methods do not suffer from such restrictions but require prohibitively large computational resources. To partially alleviate this computational burden, a 2D integral equation-based domain decomposition technique has recently been proposed (Bakir et. al., in Proc. IEEE Int. Symp. APS, 1-2, 8-14 July 2012). © 2013 IEEE.

Memória de trabalho e função executiva – uma proposta de diálogo entre dois modelos teóricos

OpenAIRE

Melo, Luciene Bandeira Rodrigues de

2011-01-01

A classificação de função executiva, que corresponde a um sistema gerenciador que tem como atributo organizar uma sequência de ações a fim de atingir um objetivo, tem sido amplamente estudada por dois conceituados autores, quais sejam, Joaquin Fuster e Alan Baddeley. O objetivo deste trabalho teórico é propor uma fusão entre as ideias destes dois neurocientistas. Fuster postulou que a função executiva opera por meio de redes neurais interativas e sobrepostas (cógnitos), distribuídas nos córti...

Autobiographical memory in temporal lobe epilepsy: role of hippocampal and temporal lateral structures.

Science.gov (United States)

Herfurth, Kirsten; Kasper, Burkhard; Schwarz, Michael; Stefan, Hermann; Pauli, Elisabeth

2010-11-01

The present study was aimed at investigating the impact of hippocampal and temporal cortical lesions on remote autobiographical memories in temporal lobe epilepsy (TLE). Episodic specificity, episodic richness, and personal semantic memory from different life periods were assessed using a modified version of the Autobiographical Memory Interview (AMI) (M.D. Kopelman, A.E. Wilson, A. Baddeley, The autobiographical memory interview. Bury St. Edmunds: Thames Valley Test Co.; 1990) in 47 patients with unilateral mesial or lateral TLE and 38 healthy controls. Patients with TLE performed significantly more poorly than controls. Patients with left and right mTLE were equally moderately impaired, but patients with left lateral TLE had the most severe episodic memory deficits, particularly for childhood memories. With respect to personal semantic memory, patients with left TLE were significantly more impaired than those with right TLE, most pronounced for childhood memories. Both autobiographical memory aspects, episodic and personal semantic memory, were significantly intercorrelated, but both did not correlate with anterograde memory, indicating a structural dissociation between both functions. Copyright © 2010 Elsevier Inc. All rights reserved.

Investigating the episodic buffer

Directory of Open Access Journals (Sweden)

Alan Baddeley

2010-10-01

Full Text Available A brief account is presented of the three-component working memory model proposed by Baddeley and Hitch. This is followed by an account of some of the problems it encountered in explaining how information from different subsystems with different codes could be combined, and how it was capable of communicating with long-term memory. In order to account for these, a fourth component was proposed, the episodic buffer. This was assumed to be a multidimensional store of limited capacity that can be accessed through conscious awareness. In an attempt to test and develop the concept, a series of experiments have explored the role of working memory in the binding of visual features into objects and verbal sequences into remembered sentences. The experiments use a dual task paradigm to investigate the role of the various subcomponents of working memory in binding. In contrast to our initial assumption, the episodic buffer appears to be a passive store, capable of storing bound features and making them available to conscious awareness, but not itself responsible for the process of binding.

Bilateral generic working memory circuit requires left-lateralized addition for verbal processing.

Science.gov (United States)

Ray, Manaan Kar; Mackay, Clare E; Harmer, Catherine J; Crow, Timothy J

2008-06-01

According to the Baddeley-Hitch model, phonological and visuospatial representations are separable components of working memory (WM) linked by a central executive. The traditional view that the separation reflects the relative contribution of the 2 hemispheres (verbal WM--left; spatial WM--right) has been challenged by the position that a common bilateral frontoparietal network subserves both domains. Here, we test the hypothesis that there is a generic WM circuit that recruits additional specialized regions for verbal and spatial processing. We designed a functional magnetic resonance imaging paradigm to elicit activation in the WM circuit for verbal and spatial information using identical stimuli and applied this in 33 healthy controls. We detected left-lateralized quantitative differences in the left frontal and temporal lobe for verbal > spatial WM but no areas of activation for spatial > verbal WM. We speculate that spatial WM is analogous to a "generic" bilateral frontoparietal WM circuit we inherited from our great ape ancestors that evolved, by recruitment of additional left-lateralized frontal and temporal regions, to accommodate language.

[Processing acoustically presented time intervals of seconds duration: an expression of the phonological loop of the working memory?].

Science.gov (United States)

Grube, D

1996-01-01

Working memory has been proposed to contribute to the processing of time, rhythm and music; the question which component of working memory is involved is under discussion. The present study tests the hypothesis that the phonological loop component (Baddeley, 1986) is involved in the processing of auditorily presented time intervals of a few seconds' duration. Typical effects well known with short-term retention of verbal material could be replicated with short-term retention of temporal intervals: The immediate reproduction of time intervals was impaired under conditions of background music and articulatory suppression. Neither the accuracy nor the speed of responses in a (non-phonological) mental rotation task were diminished under these conditions. Processing of auditorily presented time intervals seems to be constrained by the capacity of the phonological loop: The immediate serial recall of sequences of time intervals was shown to be related to the immediate serial recall of words (memory span). The results confirm the notion that working memory resources, and especially the phonological loop component, underlie the processing of auditorily presented temporal information with a duration of a few seconds.

The relationship between working memory and episodic memory disorders in transient global amnesia.

Science.gov (United States)

Quinette, Peggy; Guillery-Girard, Bérengère; Noël, Audrey; de la Sayette, Vincent; Viader, Fausto; Desgranges, Béatrice; Eustache, Francis

2006-01-01

In a previous study, we investigated the relationship between the disorders of both episodic memory and working memory in the acute phase of transient global amnesia (TGA). Since executive functions were spared, another dysfunction may be responsible for the binding and maintenance of multimodal informations and contribute to the encoding disorders observed in some patients [Quinette, P., Guillery, B., Desgranges, B., de la Sayette, V., Viader, F., & Eustache, F. (2003). Working memory and executive functions in transient global amnesia. Brain, 126, 1917-1934.]. The aim of this present study was to assess the functions of binding and maintenance of multimodal information during TGA and explore their involvement in episodic memory disorders. We therefore conducted a more thorough investigation of working memory in 16 new patients during the acute phase of TGA using two tasks designed to assess the binding process and both dimensions of the maintenance, namely the active storage and the memory load ability. We also investigated the nature of the episodic memory impairment in distinguishing between the performance of patients with preferential encoding deficits and those of patients with preferential storage disorders on the episodic memory task. This distinction was closely related to the severity of amnesia, i.e. an encoding disorder was observed rather in the early phase of TGA. The results showed that while the functions of binding and maintenance of multimodal information were intact in patients with storage disorders, they were impaired in the case of encoding deficits. These results are interpreted in the recent framework of episodic buffer proposed by Baddeley [Baddeley, A. D. (2000). The episodic buffer: A new component of working memory? Trends in Cognitive Sciences, 4, 417-423] that represents an interface between working memory and episodic memory.

Disorders of working memory and selected cognitive processes inpatients treated for paranoid schizophrenia

Directory of Open Access Journals (Sweden)

Damian Giętkowski

2012-03-01

Full Text Available Already since the times of Baddeley and Hitch the dorsolateral part of the frontal lobe was regarded as the function‑ al centre of the working memory. Working memory disorders are, on the other hand, one of the basic and consoli‑ dated disorders in the course of paranoid schizophrenia. The concept of neurodevelopmental schizophrenia com‑ bines these elements and associates the illness with the changes occurring in the brain in the prenatal period. The efficiency of the working memory system, which acts as a buffer manipulating with the possessed and inflowing information, influences the quality of other cognitive processes, such as long‑term memory, short‑term memory, con‑ centration and thinking. A study was performed on two groups: one experimental consisting of 31 people suffering from paranoid schizophrenia and one control group of 31 healthy people. In both groups a replica of Wisconsin Card Sorting Task was used in order to measure the efficiency of the working memory and selected tests from WAIS‑R (PL: the Polish adaptation of Wechsler Adult Intelligence Scale to assess the functioning of concentration, memory and thinking. The results of the study showed that in the experimental group the efficiency of the working memory is very low and that the illness affects the performance of concentration, memory and thinking. Moreover the tests proved that the working memory disorder increases with time.

[Decision making and executive function in severe traumatic brain injured patients: validation of a decision-making task and correlated features].

Science.gov (United States)

Wiederkehr, S; Barat, M; Dehail, P; de Sèze, M; Lozes-Boudillon, S; Giroire, J-M

2005-02-01

At the chronic stage, severe traumatic brain injured (TBI) patients experience difficulty in making decisions. Several studies have demonstrated the involvement of the prefrontal cortex, in particular the orbitofrontal region, in decision-making. The aim of the present study was to validate a decision-making task in this population and to ascertain whether the components of their dysexecutive syndrome may affect their decision-making and lead to difficulties for social rehabilitation. Fifteen TBI patients and 15 controlled subjects matched for age, sex and years of education were assessed by a battery of executive tests (GREFEX) and by the gambling task (GT). The TBI subjects performed significantly worse than the controlled group in five out of six GREFEX tests. The TBI choices are significantly more disadvantageous than the choices of the control group when considering the three last blocks of 20 cards of the GT. The GT total score correlated significantly with execution time of the Stroop interference condition and the Trail Making Task B, as well as with the two measures (correct sequence span and number of crossed boxes) of the double condition of Baddeley's task. We postulate that executive functioning (supervisory attentional system) influence performance in the gambling task through mechanisms of inhibitory control, divided attention and working memory. Thus, this task seems to be determined by multiple factors; the process of decision-making may depend on frontal integrity.

Perspectives on working memory: introduction to the special issue.

Science.gov (United States)

Logie, Robert H; Cowan, Nelson

2015-04-01

More than 40 years ago, Baddeley and Hitch (1974) published an article with a wealth of experimentation and theorization on working memory, the small amount of information held in mind and often used within cognitive processes such as language comprehension and production, reasoning, and problem solving. We honor this seminal accomplishment in the present special issue, and take this opportunity to provide an introduction to our perspectives on the origin of the theory of working memory, how it has affected our work, what may be coming in the near future, and how the research articles in the present issue contribute to several related themes within the clearly thriving field of working memory.

Testing Testing Testing.

Science.gov (United States)

Deville, Craig; O'Neill, Thomas; Wright, Benjamin D.; Woodcock, Richard W.; Munoz-Sandoval, Ana; Gershon, Richard C.; Bergstrom, Betty

1998-01-01

Articles in this special section consider (1) flow in test taking (Craig Deville); (2) testwiseness (Thomas O'Neill); (3) test length (Benjamin Wright); (4) cross-language test equating (Richard W. Woodcock and Ana Munoz-Sandoval); (5) computer-assisted testing and testwiseness (Richard Gershon and Betty Bergstrom); and (6) Web-enhanced testing…

実行機能障害に関するノートII -Baddeley,Barkley,Bronwski,三木成夫-

OpenAIRE

山下, 光

2003-01-01

山下(2003)では取り扱わなかった、実行機能とワーキングメモリーの関係について、対照的な立場をとる、Baddeleyの理論とBarkleyの理論を取りあげ論じた。また、Barkleyがその理論の基礎としたBronowskiの文明論と、わが国の異色の解剖学者である三木成夫の人間観との類似性を指摘し、それらを紹介するとともに若干の考察を加えた。

Exploration of a 'double-jeopardy' hypothesis within working memory profiles for children with specific language impairment.

Science.gov (United States)

Briscoe, J; Rankin, P M

2009-01-01

Children with specific language impairment (SLI) often experience difficulties in the recall and repetition of verbal information. Archibald and Gathercole (2006) suggested that children with SLI are vulnerable across two separate components of a tripartite model of working memory (Baddeley and Hitch 1974). However, the hierarchical relationship between the 'slave' systems (temporary storage) and the central executive components places a particular challenge for interpreting working memory profiles within a tripartite model. This study aimed to examine whether a 'double-jeopardy' assumption is compatible with a hierarchical relationship between the phonological loop and central executive components of the working memory model in children with SLI. If a strong double-jeopardy assumption is valid for children with SLI, it was predicted that raw scores of working memory tests thought to tap phonological loop and central executive components of tripartite working memory would be lower than the scores of children matched for chronological age and those of children matched for language level, according to independent sources of constraint. In contrast, a hierarchical relationship would imply that a weakness in a slave component of working memory (the phonological loop) would also constrain performance on tests tapping a super-ordinate component (central executive). This locus of constraint would predict that scores of children with SLI on working memory tests that tap the central executive would be weaker relative to the scores of chronological age-matched controls only. Seven subtests of the Working Memory Test Battery for Children (Digit recall, Word recall, Non-word recall, Word matching, Listening recall, Backwards digit recall and Block recall; Pickering and Gathercole 2001) were administered to 14 children with SLI recruited via language resource bases and specialist schools, as well as two control groups matched on chronological age and vocabulary level

Maintenance of auditory-nonverbal information in working memory.

Science.gov (United States)

Soemer, Alexander; Saito, Satoru

2015-12-01

According to the multicomponent view of working memory, both auditory-nonverbal information and auditory-verbal information are stored in a phonological code and are maintained by an articulation-based rehearsal mechanism (Baddeley, 2012). Two experiments have been carried out to investigate this hypothesis using sound materials that are difficult to label verbally and difficult to articulate. Participants were required to maintain 2 to 4 sounds differing in timbre over a delay of up to 12 seconds while performing different secondary tasks. While there was no convincing evidence for articulatory rehearsal as a main maintenance mechanism for auditory-nonverbal information, the results suggest that processes similar or identical to auditory imagery might contribute to maintenance. We discuss the implications of these results for multicomponent models of working memory.

Local knowledge of the link between tuberculosis and HIV-1/AIDS among the Turkana of Lodwar township: implications for tuberculosis and HIV-1/AIDS prevention.

Science.gov (United States)

Owiti, John Arianda

2008-01-01

This article is extracted from a doctoral thesis that was supported by a research grant from the International Development Research Centre of Canada (IDRC)'s Ecosystem Approaches to Human Health Training Award, the Royal Anthropological Institute of Great Britain and Northern Ireland's Emslie Horniman Scholarship Fund and McGill University, Faculty of Graduate Studies and Research's Humanities and Social Sciences Research Award. This study used a broad theoretical framework encompassing an ecosystem approach to HIV-1/AIDS that partly investigated the nexus between local knowledge of tuberculosis (TB) and HIV-1/AIDS. According to the Turkana of Lodwar township, Kenya, HIV-1/AIDS and TB are largely contagious and are attributed to impersonal and natural causes. In addition, in line with biomedical knowledge, the Turkana's local knowledge emphasises a conceptual link between TB and HIV-1/AIDS. The study also demonstrates that factors of the ecosystem such as kaada, poverty, widow inheritance, migration and other socio-cultural practices play an influential role in the vulnerability of the Turkana to the contraction and transmission of both TB and HIV-1/AIDS. The article posits an integrated approach to the prevention of TB and HIV-1 and to the management of AIDS and TB.

Electron Beam Return-Current Losses in Solar Flares: Initial Comparison of Analytical and Numerical Results

Science.gov (United States)

Holman, Gordon

2010-01-01

Accelerated electrons play an important role in the energetics of solar flares. Understanding the process or processes that accelerate these electrons to high, nonthermal energies also depends on understanding the evolution of these electrons between the acceleration region and the region where they are observed through their hard X-ray or radio emission. Energy losses in the co-spatial electric field that drives the current-neutralizing return current can flatten the electron distribution toward low energies. This in turn flattens the corresponding bremsstrahlung hard X-ray spectrum toward low energies. The lost electron beam energy also enhances heating in the coronal part of the flare loop. Extending earlier work by Knight & Sturrock (1977), Emslie (1980), Diakonov & Somov (1988), and Litvinenko & Somov (1991), I have derived analytical and semi-analytical results for the nonthermal electron distribution function and the self-consistent electric field strength in the presence of a steady-state return-current. I review these results, presented previously at the 2009 SPD Meeting in Boulder, CO, and compare them and computed X-ray spectra with numerical results obtained by Zharkova & Gordovskii (2005, 2006). The phYSical significance of similarities and differences in the results will be emphasized. This work is supported by NASA's Heliophysics Guest Investigator Program and the RHESSI Project.

Working memory training and poetry-based stimulation programs: are there differences in cognitive outcome in healthy older adults?

Science.gov (United States)

Zimmermann, Nicolle; Netto, Tania Maria; Amodeo, Maria Teresa; Ska, Bernadette; Fonseca, Rochele Paz

2014-01-01

Neuropsychological interventions have been mainly applied with clinical populations, in spite of the need of preventing negative changes across life span. Among the few studies of cognitive stimulation in elderly, surprisingly there is no enough research comparing direct and indirect active stimulation programs. This study aims to verify wheter there are differences between two cognitive interventions approaches in older adults: a structured Working Memory (WM) Training Program versus a Poetry-based Stimulation Program. Fourteen older adults were randomly assigned to participate into one of the two intervention groups. The assessed neurocognitive components were attention, episodic and working memory, communicative and executive functions. WM Training activities were based on Baddeley's model; Poetry-based Stimulation Program was composed by general language activities. Data were analyzed with one-way ANCOVA with Delta scores and pre and post-training tests raw scores. WM group improved performance on WM, inhibition, and cognitive flexibility measures, while Poetry group improved on verbal fluency and narrative discourse tasks. Both approaches presented benefits; however WM Training improved its target function with transfer effects to executive functions, being useful for future studies with a variety of dementias. Poetry-based Stimulation also improved complex linguistic abilities. Both approaches may be helpful as strategies to prevent dysfunctional aging changes.

Effect of training on the ability of dual-task coordination

Directory of Open Access Journals (Sweden)

Rosin F.M.

1999-01-01

Full Text Available Within the framework of the working memory model proposed by A. Baddeley and G. Hitch, a dual-task paradigm has been suggested to evaluate the capacity to perform simultaneously two concurrent tasks. This capacity is assumed to reflect the functioning of the central executive component, which appears to be impaired in patients with dysexecutive syndrome. The present study extends the investigation of an index ("mu", which is supposed to indicate the capacity of coordination of concurrent auditory digit span and tracking tasks, by testing the influence of training on the performance in the dual task. The presentation of the same digit sequence lists or always-different lists did not differently affect the performance. The span length affected the mu values. The improved performance in the tasks under the dual condition closely resembled the improvement in the single-task performance. So, although training improved performance in the single and dual conditions, especially for the tracking component, the mu values remained stable throughout the sessions when the single tasks were performed first. Conversely, training improved the capacity of dual-task coordination throughout the sessions when dual task was performed first, addressing the issue of the contribution of the within-session practice to the mu index.

The structuring of narrative texts into figure and ground: attention, memory and language DOI - 10.5752/P.2358-3428.2014v18n34p163

Directory of Open Access Journals (Sweden)

Adriana Maria Tenuta

2014-07-01

Full Text Available In narrative texts, some events compose the core story line and, due to their cognitive status of focus and salience, are grammatically and discursively marked as figure. Events that do not share this status are marked as narrative ground and provide information that support those central story. elements (HOPPER, 1979; TENUTA, 2006. This process of figuration in narratives reflects the cognitive principle of human perception in terms of figure and ground, proposed by the Gestalt Psychology. (KOFFKA, 1975; WERTHEIMER, 1938. This article aims at reporting results of a study that investigated the process of figuration in oral narratives produced by 13 subjects. It was tested the hypothesis of a relation between the occurrence of figure or ground narrative units and tasks with distinct cognitive demands of attention and memory. A logistic regression model showed patterns of narrative structuring connected to specific task types. The results suggest a correlation between linguistic representation of information from memory (BADDELEY, 2007’s memory model and the amount of narrative ground structures. From Bruner (2002 and Chafe’s (1990 perspectives, it is understood that narratives produced from memory content tend to have more ground units, with greater manipulation of cognitive models, not reflecting an objective representation of reality.Keywords: Attention. Memory. Cognition. Narrative. Figure and ground.

Automating Test Activities: Test Cases Creation, Test Execution, and Test Reporting with Multiple Test Automation Tools

OpenAIRE

Loke Mun Sei

2015-01-01

Software testing has become a mandatory process in assuring the software product quality. Hence, test management is needed in order to manage the test activities conducted in the software test life cycle. This paper discusses on the challenges faced in the software test life cycle, and how the test processes and test activities, mainly on test cases creation, test execution, and test reporting is being managed and automated using several test automation tools, i.e. Jira, ...

[Working memory, phonological awareness and spelling hypothesis].

Science.gov (United States)

Gindri, Gigiane; Keske-Soares, Márcia; Mota, Helena Bolli

2007-01-01

Working memory, phonological awareness and spelling hypothesis. To verify the relationship between working memory, phonological awareness and spelling hypothesis in pre-school children and first graders. Participants of this study were 90 students, belonging to state schools, who presented typical linguistic development. Forty students were preschoolers, with the average age of six and 50 students were first graders, with the average age of seven. Participants were submitted to an evaluation of the working memory abilities based on the Working Memory Model (Baddeley, 2000), involving phonological loop. Phonological loop was evaluated using the Auditory Sequential Test, subtest 5 of Illinois Test of Psycholinguistic Abilities (ITPA), Brazilian version (Bogossian & Santos, 1977), and the Meaningless Words Memory Test (Kessler, 1997). Phonological awareness abilities were investigated using the Phonological Awareness: Instrument of Sequential Assessment (CONFIAS - Moojen et al., 2003), involving syllabic and phonemic awareness tasks. Writing was characterized according to Ferreiro & Teberosky (1999). Preschoolers presented the ability of repeating sequences of 4.80 digits and 4.30 syllables. Regarding phonological awareness, the performance in the syllabic level was of 19.68 and in the phonemic level was of 8.58. Most of the preschoolers demonstrated to have a pre-syllabic writing hypothesis. First graders repeated, in average, sequences of 5.06 digits and 4.56 syllables. These children presented a phonological awareness of 31.12 in the syllabic level and of 16.18 in the phonemic level, and demonstrated to have an alphabetic writing hypothesis. The performance of working memory, phonological awareness and spelling level are inter-related, as well as being related to chronological age, development and scholarity.

Procesos de automatización cognitiva en alumnado con altas capacidades intelectuales

Directory of Open Access Journals (Sweden)

Juan Montero-Linares

2013-05-01

Full Text Available Proponemos desde el enfoque del procesamiento de la información, el estudio de características cognitivas que faciliten la identificación de las altas capacidades. A tal fin, elaboramos una tarea de habilidad de segmentación silábica que, a partir del modelo propuesto por Baddeley sobre la memoria de trabajo y la distinción entre procesos automáticos y controlados, nos permitiese comprobar las diferencias en cuanto a la capacidad de automatización de la información y si los indicadores propuestos en la misma, tenían suficiente poder clasificatorio o predictivo en la identificación de la alta capacidad intelectual. Participaron 480 niños y niñas de primero a cuarto de Educación Primaria. Se clasificaron, en función de su CI, en dos grupos: alumnado de altas capacidades y alumnado de capacidades medias. Se les administró una batería de pruebas entre las que se encontraba el test de habilidad de segmentación silábica, lo que permitió realizar su estandarización. Los resultados mostraron que los alumnos con CI superior a 130 fueron capaces de automatizar la segmentación de forma más eficiente que los de inteligencia media. La medición de los procesos automáticos a través del test de habilidad de segmentación silábica, permitió diferenciar a los participantes de altas capacidades de los que no lo eran.

Working memory in school-age children with and without a persistent speech sound disorder.

Science.gov (United States)

Farquharson, Kelly; Hogan, Tiffany P; Bernthal, John E

2017-03-17

The aim of this study was to explore the role of working memory processes as a possible cognitive underpinning of persistent speech sound disorders (SSD). Forty school-aged children were enrolled; 20 children with persistent SSD (P-SSD) and 20 typically developing children. Children participated in three working memory tasks - one to target each of the components in Baddeley's working memory model: phonological loop, visual spatial sketchpad and central executive. Children with P-SSD performed poorly only on the phonological loop tasks compared to their typically developing age-matched peers. However, mediation analyses revealed that the relation between working memory and a P-SSD was reliant upon nonverbal intelligence. These results suggest that co-morbid low-average nonverbal intelligence are linked to poor working memory in children with P-SSD. Theoretical and clinical implications are discussed.

Working memory in early Alzheimer's disease: a neuropsychological review.

Science.gov (United States)

Huntley, J D; Howard, R J

2010-02-01

Reports of the extent of working memory (WM) impairment in early Alzheimer's disease (AD) have been inconsistent. Using the model of WM proposed by Baddeley, neuropsychological evidence for the impairment of WM in early AD is evaluated. Literature searches were performed using Medline, PsycINFO and Embase databases. Individual papers were then examined for additional references not revealed by computerised searches. Phonological loop function is intact at the preclinical and early stages of AD, becoming more impaired as the disease progresses. In mild AD, there is impairment on tasks assessing visuospatial sketchpad (VSS) function; however, these tasks also require executive processing by the central executive system (CES). There is evidence that the CES is impaired in mild AD and may be affected in the earlier preclinical stage of the disease. Episodic buffer function may be impaired but further research is required. Future research into central executive functioning at the earliest stages of the disease, combined with further longitudinal studies, needs to be carried out. Tasks to assess the proposed functions of the episodic buffer and specific tests of the VSS suitable for AD subjects need to be developed and validated. Learning more about these processes and how they are affected in AD is important in understanding and managing the cognitive deficits seen in the early stages of AD.

Working memory limitations in children with severe language impairment.

Science.gov (United States)

van Daal, John; Verhoeven, Ludo; van Leeuwe, Jan; van Balkom, Hans

2008-01-01

In the present study, the relations of various aspects of working memory to various aspects of language problems in a clinical sample of 97 Dutch speaking 5-year-old children with severe language problems were studied. The working memory and language abilities of the children were examined using an extensive battery of tests. Working memory was operationalized according to the model of Baddeley. Confirmative factor analyses revealed three memory factors: phonological, visual and central executive. Language was construed as a multifactorial construct, and confirmative factor analyses revealed four factors: lexical-semantic abilities, phonological abilities, syntactic abilities and speech production abilities. Moderate to high correlations were found between the memory and language factors. Structural equation modelling was used to further explore the relations between the different factors. Phonological memory was found to predict phonological abilities; central-executive memory predicted lexical-semantic abilities; and visual memory predicted speech production abilities. Phonological abilities also predicted syntactic abilities. Both the theoretical and clinical implications of the findings are discussed. The reader will be introduced to the concepts of multifactorial components of working memory as well as language impairment. Secondly the reader will recognize that working memory and language impairment factors can be related. Particular emphasis will be placed on phonological memory, central-executive memory and visual memory and their possible prediction of specific components of language impairment.

Test Review: TestDaF

Science.gov (United States)

Norris, John; Drackert, Anastasia

2018-01-01

The Test of German as a Foreign Language (TestDaF) plays a critical role as a standardized test of German language proficiency. Developed and administered by the Society for Academic Study Preparation and Test Development (g.a.s.t.), TestDaF was launched in 2001 and has experienced persistent annual growth, with more than 44,000 test takers in…

Human temporal cortical single neuron activity during working memory maintenance.

Science.gov (United States)

Zamora, Leona; Corina, David; Ojemann, George

2016-06-01

The Working Memory model of human memory, first introduced by Baddeley and Hitch (1974), has been one of the most influential psychological constructs in cognitive psychology and human neuroscience. However the neuronal correlates of core components of this model have yet to be fully elucidated. Here we present data from two studies where human temporal cortical single neuron activity was recorded during tasks differentially affecting the maintenance component of verbal working memory. In Study One we vary the presence or absence of distracting items for the entire period of memory storage. In Study Two we vary the duration of storage so that distractors filled all, or only one-third of the time the memory was stored. Extracellular single neuron recordings were obtained from 36 subjects undergoing awake temporal lobe resections for epilepsy, 25 in Study one, 11 in Study two. Recordings were obtained from a total of 166 lateral temporal cortex neurons during performance of one of these two tasks, 86 study one, 80 study two. Significant changes in activity with distractor manipulation were present in 74 of these neurons (45%), 38 Study one, 36 Study two. In 48 (65%) of those there was increased activity during the period when distracting items were absent, 26 Study One, 22 Study Two. The magnitude of this increase was greater for Study One, 47.6%, than Study Two, 8.1%, paralleling the reduction in memory errors in the absence of distracters, for Study One of 70.3%, Study Two 26.3% These findings establish that human lateral temporal cortex is part of the neural system for working memory, with activity during maintenance of that memory that parallels performance, suggesting it represents active rehearsal. In 31 of these neurons (65%) this activity was an extension of that during working memory encoding that differed significantly from the neural processes recorded during overt and silent language tasks without a recent memory component, 17 Study one, 14 Study two

Human Temporal Cortical Single Neuron Activity During Working Memory Maintenance

Science.gov (United States)

Zamora, Leona; Corina, David; Ojemann, George

2016-01-01

The Working Memory model of human memory, first introduced by Baddeley and Hitch (1974), has been one of the most influential psychological constructs in cognitive psychology and human neuroscience. However the neuronal correlates of core components of this model have yet to be fully elucidated. Here we present data from two studies where human temporal cortical single neuron activity was recorded during tasks differentially affecting the maintenance component of verbal working memory. In Study One we vary the presence or absence of distracting items for the entire period of memory storage. In Study Two we vary the duration of storage so that distractors filled all, or only one-third of the time the memory was stored. Extracellular single neuron recordings were obtained from 36 subjects undergoing awake temporal lobe resections for epilepsy, 25 in Study one, 11 in Study two. Recordings were obtained from a total of 166 lateral temporal cortex neurons during performance of one of these two tasks, 86 study one, 80 study two. Significant changes in activity with distractor manipulation were present in 74 of these neurons (45%), 38 Study one, 36 Study two. In 48 (65%) of those there was increased activity during the period when distracting items were absent, 26 Study One, 22 Study Two. The magnitude of this increase was greater for Study One, 47.6%, than Study Two, 8.1%, paralleling the reduction in memory errors in the absence of distracters, for Study One of 70.3%, Study Two 26.3% These findings establish that human lateral temporal cortex is part of the neural system for working memory, with activity during maintenance of that memory that parallels performance, suggesting it represents active rehearsal. In 31 of these neurons (65%) this activity was an extension of that during working memory encoding that differed significantly from the neural processes recorded during overt and silent language tasks without a recent memory component, 17 Study one, 14 Study two

Enhancing the Learning Environment by Learning all the Students' Names

DEFF Research Database (Denmark)

Jørgensen, Anker Helms

the method to learn all the students' names enhances the learning environment substantially.  ReferencesCranton, Patricia (2001) Becoming an authentic teacher in higher education. Malabar, Florida: Krieger Pub. Co.Wiberg, Merete (2011): Personal email communication June 22, 2011.Woodhead, M. M. and Baddeley......Short abstract This paper describes how the teaching environment can be enhanced significantly by a simple method: learning the names of all the students. The method is time-efficient: In a course with 33 students I used 65 minutes in total. My own view of the effect was confirmed in a small study......: The students felt more valued, secure and respected. They also made an effort to learn each other's names. Long abstract In high school teachers know the students' names very soon - anything else is unthinkable (Wiberg, 2011). Not so in universities where knowing the names of all the students is the exception...

Spatial and verbal working memory: A functional magnetic resonance imaging study

Directory of Open Access Journals (Sweden)

Blaž Koritnik

2004-08-01

Full Text Available According to numerous studies, working memory is not a unitary system. Baddeley's model of working memory includes besides central executive also two separate systems for verbal and visuo-spatial information processing. A modality- and process-specific specialization presumably exists in working memory system of the frontal lobes. In our preliminary study, we have used functional magnetic resonance imaging to study the pattern of cortical activation during spatial and verbal n-back task in six healthy subjects. A bilateral fronto-parietal cortical network was activated in both tasks. There was larger activation of right parietal and bilateral occipital areas in spatial than in vebal task. Activation of left sensorimotor area was larger in verbal compared to spatial task. No task-specific differences were found in the prefrontal cortex. Our results support the assumption that modality-specific processes exist within the working-memory system.

Is working memory still working?

Science.gov (United States)

Baddeley, A D

2001-11-01

The current state of A. D. Baddeley and G. J. Hitch's (1974) multicomponent working memory model is reviewed. The phonological and visuospatial subsystems have been extensively investigated, leading both to challenges over interpretation of individual phenomena and to more detailed attempts to model the processes underlying the subsystems. Analysis of the controlling central executive has proved more challenging, leading to a proposed clarification in which the executive is assumed to be a limited capacity attentional system, aided by a newly postulated fourth system, the episodic buffer. Current interest focuses most strongly on the link between working memory and long-term memory and on the processes allowing the integration of information from the component subsystems. The model has proved valuable in accounting for data from a wide range of participant groups under a rich array of task conditions. Working memory does still appear to be working.

Are working memory deficits in bipolar disorder markers for psychosis?

Science.gov (United States)

Allen, Daniel N; Randall, Carol; Bello, Danielle; Armstrong, Christina; Frantom, Linda; Cross, Chad; Kinney, Jefferson

2010-03-01

Working memory deficits have been identified in bipolar disorder, but there is evidence suggesting that these deficits may be markers for psychosis rather than affective disorder. The current study examined this issue by comparing two groups of individuals with bipolar disorder, one with psychotic features and one without psychotic features, with a group of normal controls. Working memory was conceptualized as a multicomponent system that includes auditory and visuospatial short-term stores, executive control processes, and an episodic buffer that allows for communication between short- and long-term memory stores (Baddeley & Logie, 1999). Results indicated that only executive control processes significantly differentiated the psychotic and nonpsychotic bipolar groups, although visuospatial working memory differentiated both bipolar groups from controls. The results support the idea that some aspects of working memory performance are markers for psychosis, while others may be more general markers for bipolar disorders. Copyright 2010 APA, all rights reserved

Attentional and non-attentional systems in the maintenance of verbal information in working memory: the executive and phonological loops.

Science.gov (United States)

Camos, Valérie; Barrouillet, Pierre

2014-01-01

Working memory is the structure devoted to the maintenance of information at short term during concurrent processing activities. In this respect, the question regarding the nature of the mechanisms and systems fulfilling this maintenance function is of particular importance and has received various responses in the recent past. In the time-based resource-sharing (TBRS) model, we suggest that only two systems sustain the maintenance of information at the short term, counteracting the deleterious effect of temporal decay and interference. A non-attentional mechanism of verbal rehearsal, similar to the one described by Baddeley in the phonological loop model, uses language processes to reactivate phonological memory traces. Besides this domain-specific mechanism, an executive loop allows the reconstruction of memory traces through an attention-based mechanism of refreshing. The present paper reviews evidence of the involvement of these two independent systems in the maintenance of verbal memory items.

Attentional and non-attentional systems in the maintenance of verbal information in working memory: the executive and phonological loops

Science.gov (United States)

Camos, Valérie; Barrouillet, Pierre

2014-01-01

Working memory is the structure devoted to the maintenance of information at short term during concurrent processing activities. In this respect, the question regarding the nature of the mechanisms and systems fulfilling this maintenance function is of particular importance and has received various responses in the recent past. In the time-based resource-sharing (TBRS) model, we suggest that only two systems sustain the maintenance of information at the short term, counteracting the deleterious effect of temporal decay and interference. A non-attentional mechanism of verbal rehearsal, similar to the one described by Baddeley in the phonological loop model, uses language processes to reactivate phonological memory traces. Besides this domain-specific mechanism, an executive loop allows the reconstruction of memory traces through an attention-based mechanism of refreshing. The present paper reviews evidence of the involvement of these two independent systems in the maintenance of verbal memory items. PMID:25426049

Attentional and non-attentional systems in the maintenance of verbal information in working memory: the executive and phonological loops.

Directory of Open Access Journals (Sweden)

Valerie eCamos

2014-11-01

Full Text Available Working memory is the structure devoted to the maintenance of information at short term during concurrent processing activities. In this respect, the question regarding the nature of the mechanisms and systems fulfilling this maintenance function is of particular importance and has received various responses in the recent past. In the time-based resource-sharing model, we suggest that only two systems sustain the maintenance of information at the short term, counteracting the deleterious effect of temporal decay and interference. A non-attentional mechanism of verbal rehearsal, similar to the one described by Baddeley in the phonological loop model, uses language processes to reactivate phonological memory traces. Besides this domain-specific mechanism, an executive loop allows the reconstruction of memory traces through an attention-based mechanism of refreshing. The present paper reviews evidence of the involvement of these two independent systems in the maintenance of verbal memory items.

The Role of Consciousness in the Phonological Loop: Hidden in Plain Sight

Directory of Open Access Journals (Sweden)

Bradley Russell Buchsbaum

2013-08-01

Full Text Available We know from everyday experience that when we need to keep a small amount of verbal information in mind for a short period, an effective cognitive strategy is to silently rehearse the words. This basic cognitive strategy has been elegantly codified in Baddeley and colleagues model of verbal working memory, the phonological loop. Here we explore how the intuitive appeal of the phonological loop is grounded in the phenomenological experience of subvocal rehearsal as consisting of an interaction between an inner voice and an inner ear. We focus particularly on how our intuitions about the phenomenological experience of inner speech might constrain or otherwise inform the functional architecture of information processing models of verbal working memory such as the phonological loop; and how, indeed, how ideas about consciousness may offer alternative explanations for the dual nature of inner speech in verbal working memory.

The formation of novel social category conjunctions in working memory: A possible role for the episodic buffer?

Science.gov (United States)

Hutter, Russell R C; Allen, Richard J; Wood, Chantelle

2016-01-01

Recent research (e.g., Hutter, Crisp, Humphreys, Waters, & Moffit; Siebler) has confirmed that combining novel social categories involves two stages (e.g., Hampton; Hastie, Schroeder, & Weber). Furthermore, it is also evident that following stage 1 (constituent additivity), the second stage in these models involves cognitively effortful complex reasoning. However, while current theory and research has addressed how category conjunctions are initially represented to some degree, it is not clear precisely where we first combine or bind existing social constituent categories. For example, how and where do we compose and temporarily store a coherent representation of an individual who shares membership of "female" and "blacksmith" categories? In this article, we consider how the revised multi-component model of working memory (Baddeley) can assist in resolving the representational limitations in the extant two-stage theoretical models. This is a new approach to understanding how novel conjunctions form new bound "composite" representations.

UPTF test 21D counterpart test in the MIDAS test facility

International Nuclear Information System (INIS)

Yoon, B. C.; Ah, D. J.; Joo, I. C.; Kwon, T. S.; Park, W. M.; Song, C. H.

2002-01-01

This paper describes the experimental results of UPTF Test 21D counterpart tests in the downcomer during the late reflood phase of LBLOCA. The experiments have been performed in the MIDAS test facility using superheated steam and water. The test condition was determined,based on the test results of UPTF Test 21D, by applying the 'modified linear scaling method of 1/4.077 length scale. The tests of ECC direct bypass and void height are performed separately to estimate each phenomena quantitatively. The tests were carried out by varying the injection steam flow rate of intact cold legs widely to investigate the effect of steam flow rate on the direct bypass fraction and void height. In the tests, separate effect tests have been performed in cases of DVI-1,DVI- 2 and DVI-1 and 2 injections to see the direct bypass fraction according to the DVI nozzle combination. From the tests, we found that the fraction of direct ECC bypass and the void height observed in the MIDAS test facility reasonably well agree with those of UPTF test 21- D. It confirms that the applied 'modified linear scaling law' reproduces major thermal hydraulics phenomena in the downcomer during the LBLOCA reflood phase

Test report: Electron-proton spectrometer qualification test unit, qualification test

Science.gov (United States)

Vincent, D. L.

1972-01-01

Qualification tests of the electron-proton spectrometer test unit are presented. The tests conducted were: (1) functional, (2) thermal/vacuum, (3) electromagnetic interference, (4) acoustic, (5) shock, (6) vibration, and (7) humidity. Results of each type of test are presented in the form of data sheets.

Computer-Based Testing: Test Site Security.

Science.gov (United States)

Rosen, Gerald A.

Computer-based testing places great burdens on all involved parties to ensure test security. A task analysis of test site security might identify the areas of protecting the test, protecting the data, and protecting the environment as essential issues in test security. Protecting the test involves transmission of the examinations, identifying the…

Testing Practices and Attitudes Toward Tests and Testing: An International Survey

Czech Academy of Sciences Publication Activity Database

Evers, A.; McCormick, C. M.; Hawley, L. R.; Muñiz, J.; Balboni, G.; Bartram, D.; Boben, D.; Egeland, J.; El-Hassan, K.; Fernández-Hermida, J.R.; Fine, S.; Frans, Ö.; Gintiliéne, G.; Hagemeister, C.; Halama, P.; Iliescu, D.; Jaworowska, A.; Jiménez, P.; Manthouili, M.; Matesic, K.; Michaelsen, L.; Mogaji, A.; Morley-Kirk, J.; Rózsa, S.; Rowlands, L.; Schittekatte, M.; Sümer, H.C.; Suwartono, T.; Urbánek, Tomáš; Wechsler, S.; Zelenevska, T.; Zanev, S.; Zhang, J.

2017-01-01

Roč. 17, č. 2 (2017), s. 158-190 ISSN 1530-5058 Institutional support: RVO:68081740 Keywords : psychological testing * testing practices * test use * International Test Commission * European Federation of Psychologists' Associations Subject RIV: AN - Psychology OBOR OECD: Psychology (including human - machine relations)

Learning software testing with Test Studio

CERN Document Server

Madi, Rawane

2013-01-01

Learning Software Testing with Test Studio is a practical, hands-on guide that will help you get started with Test Studio to design your automated solution and tests. All through the book, there are best practices and tips and tricks inside Test Studio which can be employed to improve your solution just like an experienced QA.If you are a beginner or a professional QA who is seeking a fast, clear, and direct to the point start in automated software testing inside Test Studio, this book is for you. You should be familiar with the .NET framework, mainly Visual Studio, C#, and SQL, as the book's

Olivine-melt relationships and syneruptive redox variations in the 1959 eruption of K$\\bar{i}$lauea Volcano as revealed by XANES

Energy Technology Data Exchange (ETDEWEB)

Helz, R. T.; Cottrell, E.; Brounce, M. N.; Kelley, K. A.

2017-03-01

The 1959 summit eruption of K$\\bar{i}$lauea Volcano exhibited high lava fountains of gas-rich, primitive magma, containing olivine + chromian spinel in highly vesicular brown glass. Microprobe analysis of these samples shows that euhedral rims on olivine phenocrysts, in direct contact with glass, vary significantly in forsterite (Fo) content, at constant major-element melt composition, as do unzoned groundmass olivine crystals. Ferric/total iron (Fe+ 3/FeT)ratios for matrix and interstitial glasses, plus olivine-hosted glass inclusions in eight 1959 scoria samples have been determined by micro X-ray absorption near-edge structure spectroscopy (μ-XANES). These data show that much of the variation in Fo content reflects variation in oxidation state of iron in the melt, which varies with sulfur concentration in the glass and (locally) with proximity to scoria edges in contact with air. Data for 24 olivine-melt pairs in the better-equilibrated samples from later in the eruption show KD averaging 0.280 ± 0.03 for the exchange of Fe and Mg between olivine and melt, somewhat displaced from the value of 0.30 ± 0.03 given by Roeder and Emslie (1970). This may reflect the low SiO2 content of the 1959 magmas, which is lower than that in most K$\\bar{i}$lauea tholeiites. More broadly, we show the potential of μ-XANES and electron microprobe to revisit and refine the value of KD in natural systems.

An FMM-FFT accelerated integral equation solver for characterizing electromagnetic wave propagation in mine tunnels and galleries loaded with conductors

KAUST Repository

Yücel, Abdulkadir C.

2014-07-01

Reliable wireless communication and tracking systems in underground mines are of paramount importance to increase miners\\' productivity while monitoring the environmental conditions and increasing the effectiveness of rescue operations. Key to the design and optimization of such systems are electromagnetic (EM) simulation tools capable of analyzing wave propagation in electromagnetically large mine tunnels and galleries loaded with conducting cables (power, telephone) and mining equipment (trolleys, rails, carts), and potentially partially obstructed by debris from a cave-in. Current tools for simulating EM propagation in mine environments leverage (multi-) modal decompositions (Emslie et. al., IEEE Trans. Antennas Propag., 23, 192-205, 1975; Sun and Akyildiz, IEEE Trans. Commun., 58, 1758-1768, 2010), ray-tracing techniques (Zhang, IEEE Tran. Vehic. Tech., 5, 1308-1314, 2003), or full wave methods. Modal approaches and ray-tracing techniques cannot accurately account for the presence of conductors, intricate details of transmitters/receivers, wall roughness, or unstructured debris from a cave-in. Classical full-wave methods do not suffer from such restrictions. However, they require prohibitively large computational resources when applied to the analysis of electromagnetically large tunnels loaded with conductors. Recently, an efficient hybrid method of moment and transmission line solver has been developed to analyze the EM wave propagation inside tunnels loaded with conductors (Brocker et. al., in Proc IEEE AP-S Symp, pp.1,2, 2012). However, the applicability of the solver is limited to the characterization of EM wave propagation at medium frequency band.

Energy Systems Test Area (ESTA) Battery Test Operations User Test Planning Guide

Science.gov (United States)

Salinas, Michael

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the ESTA Battery Test Operations. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Open test assembly (OTA) shear demonstration testing work/test plan

International Nuclear Information System (INIS)

Hiller, S.W.

1998-01-01

This document describes the development testing phase associated with the OTA Shear activity and defines the controls to be in place throughout the testing. The purpose of the OTA Shear Program was to provide equipment that is needed for the processing of 40 foot long, sodium wetted, irradiated core components previously used in the FFTF reactor to monitor fuel and materials tests. There are currently 15 of these OTA test stalks located in the Test Assembly Conditioning Station (TACS) inerted vault. These need to be dispositioned for a shutdown mission to eliminate this highly activated, high dose inventory prior to turnover to the ERC since they must be handled by remote operations. These would also need to be dispositioned for a restart mission to free up the vault they currently reside in. The waste handling and cleaning equipment in the J33M Cell was designed and built for the handling of reactor components up to the standard 12 foot length. This program will provide the equipment to the IEM Cell to remotely section the OTAS into pieces less than 12 feet in length to allow for the necessary handling and cleaning operations required for proper disposition. Due to the complexity of all operations associated with remote handling, the availability of the IEM Cell training facility, and the major difficulty with reworking contaminated equipment, it was determined that preliminary testing of the equipment was desirable, This testing activity would provide the added assurance that the equipment will operate as designed prior to performance of the formal Acceptance Test Procedure (ATP) at the IEM Cell, This testing activity will also allow for some operator familiarity and procedure checkout prior to actual installation into the IEM Cell. This development testing will therefore be performed at the conclusion of equipment fabrication and prior to transfer of the equipment to the 400 Area

Underground Nuclear Testing Program, Nevada Test Site

International Nuclear Information System (INIS)

1975-09-01

The Energy Research and Development Administration (ERDA) continues to conduct an underground nuclear testing program which includes tests for nuclear weapons development and other tests for development of nuclear explosives and methods for their application for peaceful uses. ERDA also continues to provide nuclear explosive and test site support for nuclear effects tests sponsored by the Department of Defense. This Supplement extends the Environmental Statement (WASH-1526) to cover all underground nuclear tests and preparations for tests of one megaton (1 MT) or less at the Nevada Test Site (NTS) during Fiscal Year 1976. The test activities covered include numerous continuing programs, both nuclear and non-nuclear, which can best be conducted in a remote area. However, if nuclear excavation tests or tests of yields above 1 MT or tests away from NTS should be planned, these will be covered by separate environmental statements

To test or not to test

DEFF Research Database (Denmark)

Rochon, Justine; Gondan, Matthias; Kieser, Meinhard

2012-01-01

Background: Student's two-sample t test is generally used for comparing the means of two independent samples, for example, two treatment arms. Under the null hypothesis, the t test assumes that the two samples arise from the same normally distributed population with unknown variance. Adequate...... control of the Type I error requires that the normality assumption holds, which is often examined by means of a preliminary Shapiro-Wilk test. The following two-stage procedure is widely accepted: If the preliminary test for normality is not significant, the t test is used; if the preliminary test rejects...... the null hypothesis of normality, a nonparametric test is applied in the main analysis. Methods: Equally sized samples were drawn from exponential, uniform, and normal distributions. The two-sample t test was conducted if either both samples (Strategy I) or the collapsed set of residuals from both samples...

Tests in Print II: An Index to Tests, Test Reviews, and the Literature on Specific Tests.

Science.gov (United States)

Buros, Oscar K., Ed.

Tests in Print II is a comprehensive, annotated bibliography of all in-print tests published as separates for use with English-speaking subjects. The 1,155 two-column pages list 2,467 tests in print as of early 1974; 16,574 references through 1971 on specific tests; a reprinting of the 1974 APA-AERA-NCME Standards for Educational andPsychological…

Tractor accelerated test on test rig

Directory of Open Access Journals (Sweden)

M. Mattetti

2013-09-01

Full Text Available The experimental tests performed to validate a tractor prototype before its production, need a substantial financial and time commitment. The tests could be reduced using accelerated tests able to reproduce on the structural part of the tractor, the same damage produced on the tractor during real life in a reduced time. These tests were usually performed reproducing a particular harsh condition a defined number of times, as for example using a bumpy road on track to carry out the test in any weather condition. Using these procedures the loads applied on the tractor structure are different with respect to those obtained during the real use, with the risk to apply loads hard to find in reality. Recently it has been demonstrated how, using the methodologies designed for cars, it is possible to also expedite the structural tests for tractors. In particular, automotive proving grounds were recently successfully used with tractors to perform accelerated structural tests able to reproduce the real use of the machine with an acceleration factor higher than that obtained with the traditional methods. However, the acceleration factor obtained with a tractor on proving grounds is in any case reduced due to the reduced speed of the tractors with respect to cars. In this context, the goal of the paper is to show the development of a methodology to perform an accelerated structural test on a medium power tractor using a 4 post test rig. In particular, several proving ground testing conditions have been performed to measure the loads on the tractor. The loads obtained were then edited to remove the not damaging portion of signals, and finally the loads obtained were reproduced in a 4 post test rig. The methodology proposed could be a valid alternative to the use of a proving ground to reproduce accelerated structural tests on tractors.

Formal Functional Test Designs: Bridging the Gap Between Test Requirements and Test Specifications

Science.gov (United States)

Hops, Jonathan

1993-01-01

This presentation describes the testing life cycle, the purpose of the test design phase, and test design methods and gives an example application. Also included is a description of Test Representation Language (TRL), a summary of the language, and an example of an application of TRL. A sample test requirement and sample test design are included.

CANFLEX fuel bundle strength tests (test report)

International Nuclear Information System (INIS)

Chang, Seok Kyu; Chung, C. H.; Kim, B. D.

1997-08-01

This document outlines the test results for the strength tests of the CANFLEX fuel bundle. Strength tests are performed to determine and verify the amount of the bundle shape distortion which is against the side-stops when the bundles are refuelling. There are two cases of strength test; one is the double side-stop test which simulates the normal bundle refuelling and the other is the single side-stop test which simulates the abnormal refuelling. the strength test specification requires that the fuel bundle against the side-stop(s) simulators for this test were fabricated and the flow rates were controlled to provide the required conservative hydraulic forces. The test rig conditions of 120 deg C, 11.2 MPa were retained for 15 minutes after the flow rate was controlled during the test in two cases, respectively. The bundle loading angles of number 13- number 15 among the 15 bundles were 67.5 deg CCW and others were loaded randomly. After the tests, the bundle shapes against the side-stops were measured and inspected carefully. The important test procedures and measurements were discussed as follows. (author). 5 refs., 22 tabs., 5 figs

Working memory: a developmental study of phonological recoding.

Science.gov (United States)

Palmer, S

2000-05-01

A cross-sectional study using children aged 3 to 7 years and a cross-sequential study using children aged between 5 and 8 years showed that the development of phonological recoding in working memory was more complex than the simple dichotomous picture portrayed in the current literature. It appears that initially children use no strategy in recall, which is proposed to represent the level of automatic activation of representations in long-term memory and the storage capacity of the central executive. This is followed by a period in which a visual strategy prevails, followed by a period of dual visual-verbal coding before the adult-like strategy of verbal coding finally emerges. The results are discussed in terms of three working memory models (Baddeley, 1990; Engle, 1996; Logie, 1996) where strategy use is seen as the development of attentional processes and phonological recoding as the development of inhibitory mechanisms in the central executive to suppress the habitual response set of visual coding.

The episodic buffer: a new component of working memory?

Science.gov (United States)

Baddeley

2000-11-01

In 1974, Baddeley and Hitch proposed a three-component model of working memory. Over the years, this has been successful in giving an integrated account not only of data from normal adults, but also neuropsychological, developmental and neuroimaging data. There are, however, a number of phenomena that are not readily captured by the original model. These are outlined here and a fourth component to the model, the episodic buffer, is proposed. It comprises a limited capacity system that provides temporary storage of information held in a multimodal code, which is capable of binding information from the subsidiary systems, and from long-term memory, into a unitary episodic representation. Conscious awareness is assumed to be the principal mode of retrieval from the buffer. The revised model differs from the old principally in focussing attention on the processes of integrating information, rather than on the isolation of the subsystems. In doing so, it provides a better basis for tackling the more complex aspects of executive control in working memory.

Does working memory change with age? The interactions of concurrent articulation with the effects of word length and acoustic confusion.

Science.gov (United States)

Bireta, Tamra J; Fine, Hope C; Vanwormer, Lisa A

2013-01-01

The effects of acoustic confusion (phonological similarity), word length, and concurrent articulation (articulatory suppression) are cited as support for Working Memory's phonological loop component (e.g., Baddeley, 2000 , Psychonomic Bulletin and Review, 7, 544). Research has focused on younger adults, with no studies examining whether concurrent articulation reduces the word length and acoustic confusion effects among older adults. In the current study, younger and older adults were given lists of similar and dissimilar letters (Experiment 1) or long and short words (Experiment 2) for immediate serial reconstruction of order. Items were presented visually or auditorily, with or without concurrent articulation. As expected, younger and older adults demonstrated effects of acoustic confusion, word length, and concurrent articulation. Further, concurrent articulation reduced the effects of acoustic confusion and word length equally for younger and older adults. This suggests that age-related differences occur in overall performance, but do not reflect an age-related deficiency in the functioning of the phonological loop component of working memory.

Impaired verbal short-term memory in Down syndrome reflects a capacity limitation rather than atypically rapid forgetting.

Science.gov (United States)

M Purser, Harry R; Jarrold, Christopher

2005-05-01

Individuals with Down syndrome suffer from relatively poor verbal short-term memory. Recent work has indicated that this deficit is not caused by problems of audition, speech, or articulatory rehearsal within the phonological loop component of Baddeley and Hitch's working memory model. Given this, two experiments were conducted to investigate whether abnormally rapid decay underlies the deficit. In a first experiment, we attempted to vary the time available for decay using a modified serial recall procedure that had both verbal and visuospatial conditions. No evidence was found to suggest that forgetting is abnormally rapid in phonological memory in Down syndrome, but a selective phonological memory deficit was indicated. A second experiment further investigated possible problems of decay in phonological memory, restricted to item information. The results indicated that individuals with Down syndrome do not show atypically rapid item forgetting from phonological memory but may have a limited-capacity verbal short-term memory system.

Design Driven Testing Test Smarter, Not Harder

CERN Document Server

Stephens, M

2010-01-01

The groundbreaking book Design Driven Testing brings sanity back to the software development process by flipping around the concept of Test Driven Development (TDD) - restoring the concept of using testing to verify a design instead of pretending that unit tests are a replacement for design. Anyone who feels that TDD is "Too Damn Difficult" will appreciate this book. Design Driven Testing shows that, by combining a forward-thinking development process with cutting-edge automation, testing can be a finely targeted, business-driven, rewarding effort. In other words, you'll learn how to test

Test design requirements: Canister-scale heater test

International Nuclear Information System (INIS)

Schauer, M.I.; Craig, P.A.; Stickney, R.G.

1986-03-01

This document establishes the Test Design Requirements for the design of a canister scale heater test to be performed in the Exploratory Shaft test facility. The purpose of the test is to obtain thermomechanical rock mass response data for use in validation of the numerical models. The canister scale heater test is a full scale simulation of a high-level nuclear waste container in a prototypic emplacement borehole. Electric heaters are used to simulate the heat loads expected in an actual waste container. This document presents an overview of the test including objectives and justification for the test. A description of the test as it is presently envisioned is included. Discussions on Quality Assurance and Safety are also included in the document. 12 refs., 1 fig

Testing on air cleaning systems: Testing of the components in-place tests

International Nuclear Information System (INIS)

Billard, F.; Brion, J.

1967-01-01

The reliability of air cleaning systems is dependent on testing they are submitted to. Although in-place tests are the most important as they act as final tests upon achieved plants, component tests are necessary too. They allow detection of defective units before they are installed, partition of unit defects from mounting defects and they are more sensitive. For similar reasons, material teats are most useful. The various tests are described, about aerosol filters for one part, iodine trap for the other. The checked features are: materials nature, units sizes, efficiency, air resistance, flammability, humidity resistance, temperature resistance, adsorbent friability, etc... On iodine trapping systems, small check traps, working by-pass with the main trap are periodically subjected to efficiency test. This control allow to cut down the in-place tests frequency, particularly when poisoning from organic vapours is to be feared. (authors) [fr

Irradiation effects test series test IE-1 test results report

International Nuclear Information System (INIS)

Quapp, W.J.; Allison, C.M.; Farrar, L.C.; Mehner, A.S.

1977-03-01

The report describes the results of the first programmatic test in the Nuclear Regulatory Commission Irradiation Effects Test Series. This test (IE-1) used four 0.97m long PWR-type fuel rods fabricated from previously irradiated Saxton fuel. The objectives of this test were to evaluate the effect of fuel pellet density on pellet-cladding interaction during a power ramp and to evaluate the influence of the irradiated state of the fuel and cladding on rod behavior during film boiling operation. Data are presented on the behavior of irradiated fuel rods during steady-state operation, a power ramp, and film boiling operation. The effects of as-fabricated gap size, as-fabricated fuel density, rod power, and power ramp rate on pellet-cladding interaction are discussed. Test data are compared with FRAP-T2 computer model predictions, and comments on the consequences of sustained film boiling operation on irradiated fuel rod behavior are provided

Irradiation effects test Series Scoping Test 1: test results report

International Nuclear Information System (INIS)

Quapp, W.J.; Allison, C.M.; Farrar, L.C.

1977-09-01

The report describes the results of the first scoping test in the Irradiation Effects Test Series conducted by the Thermal Fuels Behavior Program, which is part of the Water Reactor Research Program of EG and G Idaho, Inc. The research is sponsored by the United States Nuclear Regulatory Commission. This test used an unirradiated, three-foot-long, PWR-type fuel rod. The objective of this test was to thoroughly evaluate the remote fabrication procedures to be used for irradiated rods in future tests, handling plans, and reactor operations. Additionally, selected fuel behavior data were obtained. The fuel rod was subjected to a series of preconditioning power cycles followed by a power increase which brought the fuel rod power to about 20.4 kW/ft peak linear heat rating at a coolant mass flux of 1.83 x 10 6 lb/hr-ft 2 . Film boiling occurred for a period of 4.8 minutes following flow reductions to 9.6 x 10 5 and 7.5 x 10 5 lb/hr-ft 2 . The test fuel rod failed following reactor shutdown as a result of heavy internal and external cladding oxidation and embrittlement which occurred during the film boiling operation

Testing Significance Testing

Directory of Open Access Journals (Sweden)

Joachim I. Krueger

2018-04-01

Full Text Available The practice of Significance Testing (ST remains widespread in psychological science despite continual criticism of its flaws and abuses. Using simulation experiments, we address four concerns about ST and for two of these we compare ST’s performance with prominent alternatives. We find the following: First, the 'p' values delivered by ST predict the posterior probability of the tested hypothesis well under many research conditions. Second, low 'p' values support inductive inferences because they are most likely to occur when the tested hypothesis is false. Third, 'p' values track likelihood ratios without raising the uncertainties of relative inference. Fourth, 'p' values predict the replicability of research findings better than confidence intervals do. Given these results, we conclude that 'p' values may be used judiciously as a heuristic tool for inductive inference. Yet, 'p' values cannot bear the full burden of inference. We encourage researchers to be flexible in their selection and use of statistical methods.

Test report - caustic addition system operability test procedure

International Nuclear Information System (INIS)

Parazin, R.E.

1995-01-01

This Operability Test Report documents the test results of test procedure WHC-SD-WM-OTP-167 ''Caustic Addition System Operability Test Procedure''. The Objective of the test was to verify the operability of the 241-AN-107 Caustic Addition System. The objective of the test was met

Test Architecture, Test Retrofit

Science.gov (United States)

Fulcher, Glenn; Davidson, Fred

2009-01-01

Just like buildings, tests are designed and built for specific purposes, people, and uses. However, both buildings and tests grow and change over time as the needs of their users change. Sometimes, they are also both used for purposes other than those intended in the original designs. This paper explores architecture as a metaphor for language…

Standard test method for creep-fatigue testing

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This test method covers the determination of mechanical properties pertaining to creep-fatigue deformation or crack formation in nominally homogeneous materials, or both by the use of test specimens subjected to uniaxial forces under isothermal conditions. It concerns fatigue testing at strain rates or with cycles involving sufficiently long hold times to be responsible for the cyclic deformation response and cycles to crack formation to be affected by creep (and oxidation). It is intended as a test method for fatigue testing performed in support of such activities as materials research and development, mechanical design, process and quality control, product performance, and failure analysis. The cyclic conditions responsible for creep-fatigue deformation and cracking vary with material and with temperature for a given material. 1.2 The use of this test method is limited to specimens and does not cover testing of full-scale components, structures, or consumer products. 1.3 This test method is primarily ...

[Developmental changes in visuospatial working memory].

Science.gov (United States)

Oka, Makio; Takeuchi, Akihito; Morooka, Teruko; Ogino, Tatsuya; Ohtsuka, Yoko

2010-07-01

We investigated the developmental changes in visuospatial working memory using the Visuospatial Span Task (VST) and the Matrix Visuospatial Working Memory Test (VSWMT). VST is a short-term storage task, while VSWMT is a complex dual task. VSWMT requires the use of storage, processing, and selective attention, all of which are thought to be supported by the central executive (Baddeley). The subjects of this study were 60 typically developing children (43 boys and 17 girls) aged 6-14 years (average 10.4 years). For each task we evaluated span scores and the number of total passed trials, and investigated the changes that occurred with age. To further elucidate age-related changes in visuospatial working memory, we divided the subjects into three age groups (Group A: 6-8 years, Group B: 9-11 years, and Group C: 12-14 years of age), and statistically evaluated the differences between the groups. In both tasks, span scores and the number of total passed trials showed definite age-related changes from 6 to 14 years of age. Span scores and the number of total passed trials in VSMWT continued to increase until adolescence, with significant differences between the three age groups, while those in VST increased significantly between Groups A and B (the number of total passed trials only) and between Groups A and C (span scores and the number of total passed trials); there was no significant difference between Groups B and C, however. These results suggest that the network of the brain involved in visuospatial working memory gradually matures during early school years and adolescence, and that the basic mechanisms of this network exist by 6-7 years of age. Our results also show that VST and VSWMT are suitable tests for the evaluation of visuospatial working memory in childhood and adolescence.

Energy Systems Test Area (ESTA) Electrical Power Systems Test Operations: User Test Planning Guide

Science.gov (United States)

Salinas, Michael J.

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the ESTA Electrical Power Systems Test Laboratory. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Digface characterization test plan (remote testing)

International Nuclear Information System (INIS)

Croft, K.; Hyde, R.; Allen, S.

1993-08-01

The objective of the Digface Characterization (DFC) Remote Testing project is to remotely deploy a sensor head (Mini-Lab) across a digface to determine if it can characterize the contents below the surface. The purpose of this project is to provide a robotics technology that allows removal of workers from hazards, increases speed of operations, and reduces life cycle costs compared to alternate methods and technologies. The Buried Waste Integrated Demonstration (BWID) is funding the demonstration, testing, and evaluation of DFC. This document describes the test plan for the DFC remote deployment demonstration for the BWID. The purposes of the test plan are to establish test parameters so that the demonstration results are deemed useful and usable and perform the demonstration in a safe manner and within all regulatory requirements

Including test errors in evaluating surveillance test intervals

International Nuclear Information System (INIS)

Kim, I.S.; Samanta, P.K.; Martorell, S.; Vesely, W.E.

1991-01-01

Technical Specifications require surveillance testing to assure that the standby systems important to safety will start and perform their intended functions in the event of plant abnormality. However, as evidenced by operating experience, the surveillance tests may be adversely impact safety because of their undesirable side effects, such as initiation of plant transients during testing or wearing-out of safety systems due to testing. This paper first defines the concerns, i.e., the potential adverse effects of surveillance testing, from a risk perspective. Then, we present a methodology to evaluate the risk impact of those adverse effects, focusing on two important kinds of adverse impacts of surveillance testing: (1) risk impact of test-caused trips and (2) risk impact of test-caused equipment wear. The quantitative risk methodology is demonstrated with several surveillance tests conducted at boiling water reactors, such as the tests of the main steam isolation valves, the turbine overspeed protection system, and the emergency diesel generators. We present the results of the risk-effectiveness evaluation of surveillance test intervals, which compares the adverse risk impact with the beneficial risk impact of testing from potential failure detection, along with insights from sensitivity studies

Endurance test of DUPIC irradiation test rig-003

Energy Technology Data Exchange (ETDEWEB)

Moon, J.S; Yang, M.S.; Lee, C.Y.; Ryu, J.S.; Jeon, H.G

2001-04-01

This report presents the pressure drop, vibration and endurance test results for DUPIC Irradiation Test Rig-003 which was design and fabricated by KAERI. From the pressure drop and vibration test results, it is verified that DUPIC Irradiation Test Rig-003 satisfied the limit conditions of HANARO. And, remarkable wear is not observed in DUPIC Irradiation Test Rig-003 during 40 endurance test days.

Ultrasonic Testing

Energy Technology Data Exchange (ETDEWEB)

Lee, Hyeong Jun; Kuk, Jeong Han

2002-02-15

This book introduces ultrasonic testing, which tells of outline of ultrasonic testing, principle of ultrasonic testing, prosperities of ultrasonic waves, radiographic test and ultrasonic test, basic theory on ultrasonic testing, mode conversion, transmission and diffraction, ultrasonic flaw detection and probe, standard test piece and reference test piece, like KS(JIS) ASME and ASTM, classification and properties of ultrasonic testing, straight beam method, angle beam method, ASME SEC.V.Art.5 ASTMA 388 and KS B 0817 Korean industrial standard.

Extended shadow test approach for constrained adaptive testing

NARCIS (Netherlands)

Veldkamp, Bernard P.; Ariel, A.

2002-01-01

Several methods have been developed for use on constrained adaptive testing. Item pool partitioning, multistage testing, and testlet-based adaptive testing are methods that perform well for specific cases of adaptive testing. The weighted deviation model and the Shadow Test approach can be more

From Test Takers to Test Makers

Science.gov (United States)

Smith, Kari

2009-01-01

As a classroom teacher, Kari Smith realized that traditional objective tests don't always assess what students actually know. But tests are so deeply embedded in the education system that it would be difficult to do away with them entirely. Smith decided to make tests into learning tools. In this article, Smith describes three strategies for…

Test design requirements: Thermal conductivity probe testing

International Nuclear Information System (INIS)

Heath, R.E.

1985-01-01

This document establishes the test design requirements for development of a thermal conductivity probe test. The thermal conductivity probe determines in situ thermal conductivity using a line source transient heat conduction analysis. This document presents the rationale for thermal conductivity measurement using a thermal conductivity probe. A general test description is included. Support requirements along with design constraints are detailed to allow simple design of the thermal conductivity probe and test. The schedule and delivery requirements of the responsible test designer are also included. 7 refs., 1 fig

NIF ICCS Test Controller for Automated and Manual Testing

International Nuclear Information System (INIS)

Zielinski, J S

2007-01-01

The National Ignition Facility (NIF) Integrated Computer Control System (ICCS) is a large (1.5 MSLOC), hierarchical, distributed system that controls all aspects of the NIF laser [1]. The ICCS team delivers software updates to the NIF facility throughout the year to support shot operations and commissioning activities. In 2006, there were 48 releases of ICCS: 29 full releases, 19 patches. To ensure the quality of each delivery, thousands of manual and automated tests are performed using the ICCS Test Controller test infrastructure. The TestController system provides test inventory management, test planning, automated test execution and manual test logging, release testing summaries and test results search, all through a web browser interface. Automated tests include command line based frameworks server tests and Graphical User Interface (GUI) based Java tests. Manual tests are presented as a checklist-style web form to be completed by the tester. The results of all tests, automated and manual, are kept in a common repository that provides data to dynamic status reports. As part of the 3-stage ICCS release testing strategy, the TestController system helps plan, evaluate and track the readiness of each release to the NIF facility

Reiter haemagglutination test: a screening test for syphilis.

OpenAIRE

Al-Qudah, A A; Mostratos, A

1982-01-01

Using an ultrasonicate of the Reiter treponeme as antigen the Reiter haemagglutination test (RHA) was evaluated as a serological test for syphilis. Comparison of the results of the cardiolipin Wassermann reaction, Reiter protein complement-fixation test, the fluorescent treponemal antibody-absorbed (FTA-ABS) test, the Treponema pallidum haemagglutination test (TPHA) (at dilutions of 1/16 and 1/80), and the Venereal Disease Research Laboratory test with those of the RHA showed that the RHA was...

40 CFR 53.65 - Test procedure: Loading test.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Test procedure: Loading test. 53.65... Characteristics of Class II Equivalent Methods for PM2.5 § 53.65 Test procedure: Loading test. (a) Overview. (1) The loading tests are designed to quantify any appreciable changes in a candidate method sampler's...

Parallelize Automated Tests in a Build and Test Environment

OpenAIRE

Durairaj, Selva Ganesh

2016-01-01

This thesis investigates the possibilities of finding solutions, in order to reduce the total time spent for testing and waiting times for running multiple automated test cases in a test framework. The “Automated Test Framework”, developed by Axis Communications AB, is used to write the functional tests to test both hardware and software of a resource. The functional tests that tests the software is considered in this thesis work. In the current infrastructure, tests are executed sequentially...

40 CFR 53.66 - Test procedure: Volatility test.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Test procedure: Volatility test. 53.66... Characteristics of Class II Equivalent Methods for PM2.5 § 53.66 Test procedure: Volatility test. (a) Overview. This test is designed to ensure that the candidate method's losses due to volatility when sampling semi...

Hemoglobin Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/hemoglobintest.html Hemoglobin Test To use the sharing features on this page, please enable JavaScript. What is a Hemoglobin Test? A hemoglobin test measures the levels of hemoglobin ...

Amylase Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/amylasetest.html Amylase Test To use the sharing features on this page, please enable JavaScript. What is an Amylase Test? An amylase test measures the amount of amylase ...

Hematocrit Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/hematocrittest.html Hematocrit Test To use the sharing features on this page, please enable JavaScript. What is a Hematocrit Test? A hematocrit test is a type of blood ...

Procalcitonin Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/procalcitonintest.html Procalcitonin Test To use the sharing features on this page, please enable JavaScript. What is a Procalcitonin Test? A procalcitonin test measures the level of procalcitonin ...

Test re-test reliability and construct validity of the star-track test of manual dexterity

DEFF Research Database (Denmark)

Kildebro, Niels; Amirian, Ilda; Gögenur, Ismail

2015-01-01

Objectives. We wished to determine test re-test reliability and construct validity of the star-track test of manual dexterity. Design. Test re-test reliability was examined in a controlled study. Construct validity was tested in a blinded randomized crossover study. Setting. The study was performed...... at a university hospital in Denmark. Participants. A total of 11 subjects for test re-test and 20 subjects for the construct validity study were included. All subjects were healthy volunteers. Intervention. The test re-test trial had two measurements with 2 days pause in between. The interventions...... in the construct validity study included baseline measurement, intervention 1: fatigue, intervention 2: stress, and intervention 3: fatigue and stress. There was a 2 day pause between each intervention. Main outcome measure. An integrated measure of completion time and number of errors was used. Results. All...

Test quality

International Nuclear Information System (INIS)

Hartley, R.S.; Keller, A.E.

1992-01-01

Inservice testing of safety-related components at nuclear power plants is performed under the American Society of Mechanical Engineers Boiler and Pressure Vessel Code (the Code). Subsections IWP and IWV of Section 11 of the Code state test method and frequency requirements for pumps and valves, respectively. Tests vary greatly in quality and frequency. This paper explores the concept of test quality and its relationship with operational readiness and preventive maintenance. This paper also considers the frequencies of component testing. Test quality is related to a test's ability to detect degradation that can cause component failure. The quality of the test depends on several factors, including specific parameters measured, system or component conditions, and instrument accuracy. The quality of some currently required tests for check valves, motor-operated valves, and pumps is also discussed. Suggestions are made to improve test quality by measuring different parameters, testing valves under load, and testing positive displacement pumps at high pressure and centrifugal pumps at high flow rate conditions. These suggestions can help to improve the level of assurance of component operational readiness gained from testing

Magnesium Test

Science.gov (United States)

... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

Lipase Test

Science.gov (United States)

... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

Rubella Test

Science.gov (United States)

... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

Mono Test

Science.gov (United States)

... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

AMA Test

Science.gov (United States)

... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

Irradiation Effects Test Series: Test IE-3. Test results report

International Nuclear Information System (INIS)

Farrar, L.C.; Allison, C.M.; Croucher, D.W.; Ploger, S.A.

1977-10-01

The objectives of the test reported were to: (a) determine the behavior of irradiated fuel rods subjected to a rapid power increase during which the possibility of a pellet-cladding mechanical interaction failure is enhanced and (b) determine the behavior of these fuel rods during film boiling following this rapid power increase. Test IE-3 used four 0.97-m long pressurized water reactor type fuel rods fabricated from previously irradiated fuel. The fuel rods were subjected to a preconditioning period, followed by a power ramp to 69 kW/m at a coolant mass flux of 4920 kg/s-m 2 . After a flow reduction to 2120 kg/s-m 2 , film boiling occurred on the fuel rods. One rod failed approximately 45 seconds after the reactor was shut down as a result of cladding embrittlement due to extensive cladding oxidation. Data are presented on the behavior of these irradiated fuel rods during steady-state operation, the power ramp, and film boiling operation. The effects of a power ramp and power ramp rates on pellet-cladding interaction are discussed. Test data are compared with FRAP-T3 computer model calculations and data from a previous Irradiation Effects test in which four irradiated fuel rods of a similar design were tested. Test IE-3 results indicate that the irradiated state of the fuel rods did not significantly affect fuel rod behavior during normal, abnormal (power ramp of 20 kW/m per minute), and accident (film boiling) conditions

Allergy tests: Comparison between the Radio-Allergo-Sorbent Test (RAST) and cutaneous test as well as inhalative provocation test

International Nuclear Information System (INIS)

Langenstrass, J.A.

1979-01-01

As this publication has shown, the Radio-Allergo-Sorbent Test (RAST) is well suited for investigation programs. Absence of physical strain for the patient, precise reproducibility of the results and fair agreement with other test methods are above all qualities in favour of RAST. Its main disadvantages are the as yet rather restricted spectrum of allergens and expensiveness and high technical requirement. Substantial technical requirements are also involved with the inhalative provocation test, if properly carried out, but here the spectrum of allergens is by far greater. On the other hand, it exposes patients to great physical strain. The skin tests are most simple to carry out but present the largest position of misresults and are less reproducible than the two former procedures. The Radio-Immuno-Sorbent Test (RIST) can provide very useful results as a preliminary test but is also very costly owing to its high technical demands. - In conclusion, RAST is most conveniently used as a co-test in a complete investigation program where it constitutes a valuable aid. As a sole alternative to skin tests and inhalative provocation tests it is a yet not recommendable for the above-mentioned reasons. Although not able to replace the two conventional methods within the foreseeable future, it is expected to be used more widely on further development. (orig./MG) [de

Re-test reliability of gustatory testing and introduction of the sensitive Taste-Drop-Test

DEFF Research Database (Denmark)

Fjaeldstad, A; Niklassen, A; Fernandes, H

2018-01-01

. Testing gustatory function can be important for diagnostics and assessment of treatment effects. However, the gustatory tests applied are required to be both sensitive and reliable.In this study, we investigate the re-test validity of popular Taste Strips gustatory test for gustatory screening....... Furthermore, we introduce a new sensitive Taste-Drop-Test, which was found to be superior for detecting a more accurate measure of tastant sensitivity....

Energy Systems Test Area (ESTA). Power Systems Test Facilities

Science.gov (United States)

Situ, Cindy H.

2010-01-01

This viewgraph presentation provides a detailed description of the Johnson Space Center's Power Systems Facility located in the Energy Systems Test Area (ESTA). Facilities and the resources used to support power and battery systems testing are also shown. The contents include: 1) Power Testing; 2) Power Test Equipment Capabilities Summary; 3) Source/Load; 4) Battery Facilities; 5) Battery Test Equipment Capabilities Summary; 6) Battery Testing; 7) Performance Test Equipment; 8) Battery Test Environments; 9) Battery Abuse Chambers; 10) Battery Abuse Capabilities; and 11) Battery Test Area Resources.

Seismic testing

International Nuclear Information System (INIS)

Sollogoub, Pierre

2001-01-01

This lecture deals with: qualification methods for seismic testing; objectives of seismic testing; seismic testing standards including examples; main content of standard; testing means; and some important elements of seismic testing

Proficiency Testing in Nondestructive Testing (NDT)

International Nuclear Information System (INIS)

Amry Amin Abbas; Suhairy Sani; Mohamad Pauzi Ismail; Abd Nassir Ibrahim

2014-01-01

Department of Standard Malaysia (DSM) launched myPTP programme on 31 December 2013 in accordance to ISO/IC 17043. The standard states the requirements for Proficiency Testing. The provider of these services is called Proficiency Testing Provider (PTP). The role of PTP is to compare the proficiency level between inspection bodies or laboratories. With the assistance of expert panel, the PTP will determine the assigned value as reference to be compared to the values obtained from the inspection bodies or laboratories. Quality wise, this services is important as participation will improve wuality of the inspection quality continuously and increase confidence level of client and improve safety level. Requirement of PT in NDT is mentioned in SC1.5- Specific Criteria for Accreditation of Mechanical Testing and Non-Destructive Testing (NDT) for MS ISO/IEC17025 and MTR2- MIBAS Technical Requirements for Accreditation of NDT. This paper explains and discusses the result of this proficiency test done on a number of NDT companies that participated. (author)

Built-In Test Engine For Memory Test

OpenAIRE

McEvoy, Paul; Farrell, Ronan

2004-01-01

In this paper we will present an on-chip method for testing high performance memory devices, that occupies minimal area and retains full flexibility. This is achieved through microcode test instructions and the associated on-chip state machine. In addition, the proposed methodology will enable at-speed testing of memory devices. The relevancy of this work is placed in context with an introduction to memory testing and the techniques and algorithms generally used today.

Schirmer test

Science.gov (United States)

Tear test; Tearing test; Dry eye test; Basal secretion test; Sjögren - Schirmer; Schirmer's test ... used when the eye doctor suspects you have dry eye. Symptoms include dryness of the eyes or excessive ...

The Relationship between Anxiety and Test-Taking C-Test and Cloze-Test

Science.gov (United States)

Azimi, Mozhgan

2016-01-01

Anxiety has an important role in teaching and learning. If teachers can recognize which kind of tests create high anxiety then they will be able to omit these kinds of tests. Then, the results of test can probably show the students' knowledge more carefully. The subjects of the present study were sixty Iranian female junior university students.…

Test quality

International Nuclear Information System (INIS)

Hartley, R.S.; Keller, A.E.

1992-01-01

This document discusses inservice testing of safety-related components at nuclear power plants which is performed under the American Society of Mechanical Engineers Boiler and Pressure Vessel Code (the Code). Subsections IWP and IWV of Section XI of the Code state test method and frequency requirements for pumps and valves respectively. Tests vary greatly in quality and frequency. This paper explores the concept of test quality and its relationship with operational readiness and preventive maintenance. This paper also considers the frequencies of component testing. Test quality is related to a test's ability to detect degradation that can cause component failure. The quality of the test depends on several factors, including specific parameters measured, system or component conditions, and instrument accuracy. The quality of some currently required tests for check valves, motor-operated valves, and pumps is also discussed. Suggestions are made to improve test quality by measuring different parameters, testing valves under load, and testing positive displacement pumps at high pressure and centrifugal pumps at high flow rate conditions. These suggestions can help to improve the level of assurance of component operational readiness gained from testing

Virtual Turbine Engine Test Bench Using MGET Test Device

Science.gov (United States)

Kho, Seonghee; Kong, Changduk; Ki, Jayoung

2015-05-01

Test device using virtual engine simulator can help reduce the number of engine tests through tests similar to the actual engine tests and repeat the test under the same condition, and thus reduce the engine maintenance and operating costs [1]. Also, as it is possible to easily implement extreme conditions in which it is hard to conduct actual tests, it can prevent engine damages that may happen during the actual engine test under such conditions. In this study, an upgraded MGET test device was developed that can conduct both real and virtual engine test by applying real-time engine model to the existing MGET test device that was developed and has been sold by the Company. This newly developed multi-purpose MGET test device is expected to be used for various educational and research purposes.

Integrated Test and Evaluation Flight Test 3 Flight Test Plan

Science.gov (United States)

Marston, Michael Lawrence

2015-01-01

The desire and ability to fly Unmanned Aircraft Systems (UAS) in the National Airspace System (NAS) is of increasing urgency. The application of unmanned aircraft to perform national security, defense, scientific, and emergency management are driving the critical need for less restrictive access by UAS to the NAS. UAS represent a new capability that will provide a variety of services in the government (public) and commercial (civil) aviation sectors. The growth of this potential industry has not yet been realized due to the lack of a common understanding of what is required to safely operate UAS in the NAS. NASA's UAS Integration into the NAS Project is conducting research in the areas of Separation Assurance/Sense and Avoid Interoperability, Human Systems Integration (HSI), and Communication to support reducing the barriers of UAS access to the NAS. This research is broken into two research themes namely, UAS Integration and Test Infrastructure. UAS Integration focuses on airspace integration procedures and performance standards to enable UAS integration in the air transportation system, covering Sense and Avoid (SAA) performance standards, command and control performance standards, and human systems integration. The focus of Test Infrastructure is to enable development and validation of airspace integration procedures and performance standards, including the integrated test and evaluation. In support of the integrated test and evaluation efforts, the Project will develop an adaptable, scalable, and schedulable relevant test environment capable of evaluating concepts and technologies for unmanned aircraft systems to safely operate in the NAS. To accomplish this task, the Project will conduct a series of Human-in-the-Loop and Flight Test activities that integrate key concepts, technologies and/or procedures in a relevant air traffic environment. Each of the integrated events will build on the technical achievements, fidelity and complexity of the previous tests and

Test report for core drilling ignitability testing

International Nuclear Information System (INIS)

Witwer, K.S.

1996-01-01

Testing was carried out with the cooperation of Westinghouse Hanford Company and the United States Bureau of Mines at the Pittsburgh Research Center in Pennsylvania under the Memorandum of Agreement 14- 09-0050-3666. Several core drilling equipment items, specifically those which can come in contact with flammable gasses while drilling into some waste tanks, were tested under conditions similar to actual field sampling conditions. Rotary drilling against steel and rock as well as drop testing of several different pieces of equipment in a flammable gas environment were the specific items addressed. The test items completed either caused no ignition of the gas mixture, or, after having hardware changes or drilling parameters modified, produced no ignition in repeat testing

Neuropathy Tests

Science.gov (United States)

... LD) Lactoferrin Lactose Tolerance Tests LDL Cholesterol LDL Particle Testing (LDL-P) Lead Legionella Testing Leptin Levetiracetam Lipase ... tests, such as computed tomography (CT) scans or magnetic resonance imaging ... suspected, additional testing may be performed to evaluate heart rate, blood ...

Pinworm test

Science.gov (United States)

Oxyuriasis test; Enterobiasis test; Tape test ... diagnose this infection is to do a tape test. The best time to do this is in ... lay their eggs at night. Steps for the test are: Firmly press the sticky side of a ...

Coverage of the Test of Memory Malingering, Victoria Symptom Validity Test, and Word Memory Test on the Internet: is test security threatened?

Science.gov (United States)

Bauer, Lyndsey; McCaffrey, Robert J

2006-01-01

In forensic neuropsychological settings, maintaining test security has become critically important, especially in regard to symptom validity tests (SVTs). Coaching, which can entail providing patients or litigants with information about the cognitive sequelae of head injury, or teaching them test-taking strategies to avoid detection of symptom dissimulation has been examined experimentally in many research studies. Emerging evidence supports that coaching strategies affect psychological and neuropsychological test performance to differing degrees depending on the coaching paradigm and the tests administered. The present study sought to examine Internet coverage of SVTs because it is potentially another source of coaching, or information that is readily available. Google searches were performed on the Test of Memory Malingering, the Victoria Symptom Validity Test, and the Word Memory Test. Results indicated that there is a variable amount of information available about each test that could threaten test security and validity should inappropriately interested parties find it. Steps that could be taken to improve this situation and limitations to this exploration are discussed.

Test techniques for fracture mechanics testing

International Nuclear Information System (INIS)

Schwalbe, K.H.

1980-01-01

Test methods for fracture mechanics tests are described. Two groups of techniques are distinguished: Those for measurement of stable crack growth and those for determination of the loading parameters. (orig.) [de

Large scale reflood test with cylindrical core test facility (CCTF). Core I. FY 1979 tests

International Nuclear Information System (INIS)

Murao, Yoshio; Akimoto, Hajime; Okubo, Tsutomu; Sudoh, Takashi; Hirano, Kenmei

1982-03-01

This report presents the results of analysis of the data obtained in the CCTF Core I test series (19 tests) in FY. 1979 as an interim report. The Analysis of the test results showed that: (1) The present safety evaluation model on the reflood phenomena during LOCA conservatively represents the phenomena observed in the tests except for the downcomer thermohydrodynamic behavior. (2) The downcomer liquid level rose slowly and it took long time for the water to reach a terminal level or the spill-over level. It was presume that such a results was due to an overly conservative selection of the ECC flow rate. This presumption will be checked against a future test result for an increased flow rate. The loop-seal-water filling test was unsuccessful due to a premature power shutdown by the core protection circuit. The test will be conducted again. The tests to be performed in the future are summerized. Tests for investigation of the refill phenomena were also proposed. (author)

Motivation and Test Anxiety in Test Performance across Three Testing Contexts: The CAEL, CET, and GEPT

Science.gov (United States)

Cheng, Liying; Klinger, Don; Fox, Janna; Doe, Christine; Jin, Yan; Wu, Jessica

2014-01-01

This study examined test-takers' motivation, test anxiety, and test performance across a range of social and educational contexts in three high-stakes language tests: the Canadian Academic English Language (CAEL) Assessment in Canada, the College English Test (CET) in the People's Republic of China, and the General English Proficiency Test (GEPT)…

Randomization tests

CERN Document Server

Edgington, Eugene

2007-01-01

Statistical Tests That Do Not Require Random Sampling Randomization Tests Numerical Examples Randomization Tests and Nonrandom Samples The Prevalence of Nonrandom Samples in Experiments The Irrelevance of Random Samples for the Typical Experiment Generalizing from Nonrandom Samples Intelligibility Respect for the Validity of Randomization Tests Versatility Practicality Precursors of Randomization Tests Other Applications of Permutation Tests Questions and Exercises Notes References Randomized Experiments Unique Benefits of Experiments Experimentation without Mani

Galileo battery testing and the impact of test automation

Science.gov (United States)

Pertuch, W. T.; Dils, C. T.

1985-01-01

Test complexity, changes of test specifications, and the demand for tight control of tests led to the development of automated testing used for Galileo and other projects. The use of standardized interfacing, i.e., IEEE-488, with desktop computers and test instruments, resulted in greater reliability, repeatability, and accuracy of both control and data reporting. Increased flexibility of test programming has reduced costs by permitting a wide spectrum of test requirements at one station rather than many stations.

There are multiple contributors to the verbal short-term memory deficit in children with developmental reading disabilities.

Science.gov (United States)

Kibby, Michelle Y

2009-09-01

Prior research has put forth at least four possible contributors to the verbal short-term memory (VSTM) deficit in children with developmental reading disabilities (RD): poor phonological awareness that affects phonological coding into VSTM, a less effective phonological store, slow articulation rate, and fewer/poorer quality long-term memory (LTM) representations. This project is among the first to test the four suppositions in one study. Participants included 18 children with RD and 18 controls. VSTM was assessed using Baddeley's model of the phonological loop. Findings suggest all four suppositions are correct, depending upon the type of material utilized. Children with RD performed comparably to controls in VSTM for common words but worse for less frequent words and nonwords. Furthermore, only articulation rate predicted VSTM for common words, whereas Verbal IQ and articulation rate predicted VSTM for less frequent words, and phonological awareness and articulation rate predicted VSTM for nonwords. Overall, findings suggest that the mechanism(s) used to code and store items by their meaning is intact in RD, and the deficit in VSTM for less frequent words may be a result of fewer/poorer quality LTM representations for these words. In contrast, phonological awareness and the phonological store are impaired, affecting VSTM for items that are coded phonetically. Slow articulation rate likely affects VSTM for most material when present. When assessing reading performance, VSTM predicted decoding skill but not word identification after controlling Verbal IQ and phonological awareness. Thus, VSTM likely contributes to reading ability when words are novel and must be decoded.

Speculations on the Origin of STM

Directory of Open Access Journals (Sweden)

Joachim Hoffmann

2010-10-01

Full Text Available Memory generally is understood as being “a system for storing and retrieving information” (e.g. Baddeley, 1997, p.9. Accordingly, memory has been investigated almost exclusively by presenting some stimulus materials to the participants, such as a list of words or a series of pictures, and by testing the ability of the participants to retrieve the stimuli after some time. However, memory is more than the ability to reproduce earlier presented word lists or to recognize earlier presented pictures. In some sense memory is involved in any activity we perform. Already perceiving is in essence recognition. When we see a birch, the visual stimulus activates what we know about birches: how they look like, the features they possess, and how they are called. Likewise, acting is also in essence recall. When we sign a document, we have to recall how to move our hand in order to produce the signature; the same is true for walking, speaking, and every other activity we are familiar with. We always have to reproduce what to do in order to attain the intended goal. Under this broader perspective, memory not only refers to storing and retrieving information but to the preservation of experiences in general. In other words, memory underlies aftereffects of current experiences on future behaviour. This general description resembles very much the definition typically used for learning. Thus, it appears that learning and memory are not distinct processes but rather two different sides of one and the same coin.

Error response test system and method using test mask variable

Science.gov (United States)

Gender, Thomas K. (Inventor)

2006-01-01

An error response test system and method with increased functionality and improved performance is provided. The error response test system provides the ability to inject errors into the application under test to test the error response of the application under test in an automated and efficient manner. The error response system injects errors into the application through a test mask variable. The test mask variable is added to the application under test. During normal operation, the test mask variable is set to allow the application under test to operate normally. During testing, the error response test system can change the test mask variable to introduce an error into the application under test. The error response system can then monitor the application under test to determine whether the application has the correct response to the error.

Tensile testing

CERN Document Server

2004-01-01

A complete guide to the uniaxial tensile test, the cornerstone test for determining the mechanical properties of materials: Learn ways to predict material behavior through tensile testing. Learn how to test metals, alloys, composites, ceramics, and plastics to determine strength, ductility and elastic/plastic deformation. A must for laboratory managers, technicians, materials and design engineers, and students involved with uniaxial tensile testing. Tensile Testing , Second Edition begins with an introduction and overview of the test, with clear explanations of how materials properties are determined from test results. Subsequent sections illustrate how knowledge gained through tensile tests, such as tension properties to predict the behavior (including strength, ductility, elastic or plastic deformation, tensile and yield strengths) have resulted in improvements in materals applications. The Second Edition is completely revised and updated. It includes expanded coverage throughout the volume on a variety of ...

Ham test

Science.gov (United States)

Acid hemolysin test; Paroxysmal nocturnal hemoglobinuria - Ham test; PNH - Ham test ... BJ. In: Chernecky CC, Berger BJ, eds. Laboratory Tests and Diagnostic Procedures . 6th ed. Philadelphia, PA: Elsevier ...

Test Re-Test Reliability of Four Versions of the 3-Cone Test in Non-Athletic Men

Directory of Open Access Journals (Sweden)

Jason G. Langley, Robert D. Chetlin

2017-03-01

Full Text Available Until recently, measurement and evaluation in sport science, especially agility testing, has not always included key elements of proper test construction. Often tests are published without reporting reliability and validity analysis for a specific population. The purpose of the present study was to examine the test re-test reliability of four versions of the 3-Cone Test (3CT, and provide guidance on proper test construction for testing agility in athletic populations. Forty male students enrolled in classes in the Department of Physical Education at a mid-Atlantic university participated. On each of test day participants performed 10 trials. In random order, they performed three trials to the right (3CTR, standard test, three to the left (3CTL, and two modified trials (3CTAR and 3CTAL, which included a reactive component in which a visual cue was given to indicate direction. Intra-class correlation coefficients (ICC indicated a moderate to high reliability for the four tests, 3CTR 0.79 (0.64-0.88, 95%CI, 3CTL 0.73 (0.55-0.85, 3CTAR 0.85(0.74-0.92, and 3CTAL 0.79 (0.64-0.88. Small standard error of the measurement (SEM was found; range 0.09 to 0.10. Pearson correlations between tests were high (0.82-0.92 on day one as well as day two (0.72-0.85. These results indicate each version of the 3-Cone Test is reliable; however, further tests are needed with specific athletic populations. Only the 3CTAR and 3CTAL are tests of agility due to the inclusion of a reactive component. Future studies examining agility testing and training should incorporate technological elements, including automated timing systems and motion capture analysis. Such instrumentation will allow for optimal design of tests that simulate sport-specific game conditions.

Allergy testing - skin

Science.gov (United States)

Patch tests - allergy; Scratch tests - allergy; Skin tests - allergy; RAST test; Allergic rhinitis - allergy testing; Asthma - allergy testing; Eczema - allergy testing; Hayfever - allergy testing; Dermatitis - allergy testing; Allergy testing; ...

Irradiation effects test series, test IE-5. Test results report

International Nuclear Information System (INIS)

Croucher, D.W.; Yackle, T.R.; Allison, C.M.; Ploger, S.A.

1978-01-01

Test IE-5, conducted in the Power Burst Facility at the Idaho National Engineering Laboratory, employed three 0.97-m long pressurized water reactor type fuel rods, fabricated from previously irradiated zircaloy-4 cladding and one similar rod fabricated from unirradiated cladding. The objectives of the test were to evaluate the influence of simulated fission products, cladding irradiation damage, and fuel rod internal pressure on pellet-cladding interaction during a power ramp and on fuel rod behavior during film boiling operation. The four rods were subjected to a preconditioning period, a power ramp to an average fuel rod peak power of 65 kW/m, and steady state operation for one hour at a coolant mass flux of 4880 kg/s-m 2 for each rod. After a flow reduction to 1800 kg/s-m 2 , film boiling occurred on one rod. Additional flow reductions to 970 kg/s-m 2 produced film boiling on the three remaining fuel rods. Maximum time in film boiling was 80s. The rod having the highest initial internal pressure (8.3 MPa) failed 10s after the onset of film boiling. A second rod failed about 90s after reactor shutdown. The report contains a description of the experiment, the test conduct, test results, and results from the preliminary postirradiation examination. Calculations using a transient fuel rod behavior code are compared with the test results

Integrating Test-Form Formatting into Automated Test Assembly

Science.gov (United States)

Diao, Qi; van der Linden, Wim J.

2013-01-01

Automated test assembly uses the methodology of mixed integer programming to select an optimal set of items from an item bank. Automated test-form generation uses the same methodology to optimally order the items and format the test form. From an optimization point of view, production of fully formatted test forms directly from the item pool using…

Reliability of two social cognition tests: The combined stories test and the social knowledge test.

Science.gov (United States)

Thibaudeau, Élisabeth; Cellard, Caroline; Legendre, Maxime; Villeneuve, Karèle; Achim, Amélie M

2018-04-01

Deficits in social cognition are common in psychiatric disorders. Validated social cognition measures with good psychometric properties are necessary to assess and target social cognitive deficits. Two recent social cognition tests, the Combined Stories Test (COST) and the Social Knowledge Test (SKT), respectively assess theory of mind and social knowledge. Previous studies have shown good psychometric properties for these tests, but the test-retest reliability has never been documented. The aim of this study was to evaluate the test-retest reliability and the inter-rater reliability of the COST and the SKT. The COST and the SKT were administered twice to a group of forty-two healthy adults, with a delay of approximately four weeks between the assessments. Excellent test-retest reliability was observed for the COST, and a good test-retest reliability was observed for the SKT. There was no evidence of practice effect. Furthermore, an excellent inter-rater reliability was observed for both tests. This study shows a good reliability of the COST and the SKT that adds to the good validity previously reported for these two tests. These good psychometrics properties thus support that the COST and the SKT are adequate measures for the assessment of social cognition. Copyright © 2018. Published by Elsevier B.V.

Irradiation Effects Test Series: Test IE-3. Test results report. [PWR

Energy Technology Data Exchange (ETDEWEB)

Farrar, L. C.; Allison, C. M.; Croucher, D. W.; Ploger, S. A.

1977-10-01

The objectives of the test reported were to: (a) determine the behavior of irradiated fuel rods subjected to a rapid power increase during which the possibility of a pellet-cladding mechanical interaction failure is enhanced and (b) determine the behavior of these fuel rods during film boiling following this rapid power increase. Test IE-3 used four 0.97-m long pressurized water reactor type fuel rods fabricated from previously irradiated fuel. The fuel rods were subjected to a preconditioning period, followed by a power ramp to 69 kW/m at a coolant mass flux of 4920 kg/s-m/sup 2/. After a flow reduction to 2120 kg/s-m/sup 2/, film boiling occurred on the fuel rods. One rod failed approximately 45 seconds after the reactor was shut down as a result of cladding embrittlement due to extensive cladding oxidation. Data are presented on the behavior of these irradiated fuel rods during steady-state operation, the power ramp, and film boiling operation. The effects of a power ramp and power ramp rates on pellet-cladding interaction are discussed. Test data are compared with FRAP-T3 computer model calculations and data from a previous Irradiation Effects test in which four irradiated fuel rods of a similar design were tested. Test IE-3 results indicate that the irradiated state of the fuel rods did not significantly affect fuel rod behavior during normal, abnormal (power ramp of 20 kW/m per minute), and accident (film boiling) conditions.

RIA testing capability of the transient reactor test facility

International Nuclear Information System (INIS)

Crawford, D.C.; Swanson, R.W.

1999-01-01

The advent of high-burnup fuel implementation in LWRs has generated international interest in high-burnup LWR fuel performance. Recent testing under simulated RIA conditions has demonstrated that certain fuel designs fail at peak fuel enthalpy values that are below existing regulatory criteria. Because many of these tests were performed with non-prototypically aggressive test conditions (i.e., with power pulse widths less than 10 msec FWHM and with non-protoypic coolant configurations), the results (although very informative) do not indisputably identify failure thresholds and fuel behavior. The capability of the TREAT facility to perform simulated RIA tests with prototypic test conditions is currently being evaluated by ANL personnel. TREAT was designed to accommodate test loops and vehicles installed for in-pile transient testing. During 40 years of TREAT operation and fuel testing and evaluation, experimenters have been able to demonstrate and determine the transient behavior of several types of fuel under a variety of test conditions. This experience led to an evolution of test methodology and techniques which can be employed to assess RIA behavior of LWR fuel. A pressurized water loop that will accommodate RIA testing of LWR and CANDU-type fuel has completed conceptual design. Preliminary calculations of transient characteristics and energy deposition into test rods during hypothetical TREAT RIA tests indicate that with the installation of a pressurized water loop, the facility is quite capable of performing prototypic RIA testing. Typical test scenarios indicate that a simulated RIA with a 72 msec FWHM pulse width and energy deposition of 1200 kJ/kg (290 cal/gm) is possible. Further control system enhancements would expand the capability to pulse widths as narrow as 40 msec. (author)

Trichomonas Testing

Science.gov (United States)

... Genetic Tests for Targeted Cancer Therapy Glucose Tests Gonorrhea Testing Gram Stain Growth Hormone Haptoglobin hCG Pregnancy ... With some NAATs, samples collected for testing of gonorrhea and chlamydial infections can also be used to ...

Science Library of Test Items. Volume Nine. Mastery Testing Programme. [Mastery Tests Series 1.] Tests M1-M13.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As part of a series of tests to measure mastery of specific skills in the natural sciences, copies of the first 13 tests are provided. Skills to be tested include: (1) reading a table; (2) using a biological key; (3) identifying chemical symbols; (4) identifying parts of a human body; (5) reading a line graph; (6) identifying electronic and…

Rail Impact Testing. Test Operations Procedure (TOP)

Science.gov (United States)

2008-09-15

impact test. The rail impact test is used to verify structural integrity of the test item and the adequacy of the tie-down system and tie-down...strength of provisions, connection and supporting structural frame, paragraph 5.2.3 ** Superscript...parts, to include outriggers and booms) without advanced approval by SDDCTEA. Torque nuts on wire rope clips to their correct value. Torque cable

Coombs test

Science.gov (United States)

Direct antiglobulin test; Indirect antiglobulin test; Anemia - hemolytic ... No special preparation is necessary for this test. ... There are 2 types of the Coombs test: Direct Indirect The direct ... that are stuck to the surface of red blood cells. Many diseases ...

Comparison of test protocols for standard room/corner tests

Science.gov (United States)

R. H. White; M. A. Dietenberger; H. Tran; O. Grexa; L. Richardson; K. Sumathipala; M. Janssens

1998-01-01

As part of international efforts to evaluate alternative reaction-to-fire tests, several series of room/comer tests have been conducted. This paper reviews the overall results of related projects in which different test protocols for standard room/corner tests were used. Differences in the test protocols involved two options for the ignition burner scenario and whether...

Chloride Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/chloridebloodtest.html Chloride Blood Test To use the sharing features on this page, please enable JavaScript. What is a Chloride Blood Test? A chloride blood test measures the ...

Bilirubin Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/bilirubinbloodtest.html Bilirubin Blood Test To use the sharing features on this page, please enable JavaScript. What is a Bilirubin Blood Test? A bilirubin blood test measures the ...

National Ignition Facility TestController for automated and manual testing

Energy Technology Data Exchange (ETDEWEB)

Zielinski, Jason, E-mail: fishler2@llnl.gov [Lawrence Livermore National Laboratory, Livermore, CA 94551 (United States)

2012-12-15

The Controls and Information Systems (CIS) organization for the National Ignition Facility (NIF) has developed controls, configuration and analysis software applications that combine for several million lines of code. The team delivers updates throughout the year, from major releases containing hundreds of changes to patch releases containing a small number of focused updates. To ensure the quality of each delivery, manual and automated tests are performed using the NIF TestController test infrastructure. The TestController system provides test inventory management, test planning, automated and manual test execution, release testing summaries and results search, all through a web browser interface. As part of the three-stage software testing strategy, the NIF TestController system helps plan, evaluate and track the readiness of each release to the NIF production environment. After several years of use in testing NIF software applications, the TestController's manual testing features have been leveraged for verifying the installation and operation of NIF Target Diagnostic hardware. The TestController recorded its first test results in 2004. Today, the system has recorded the execution of more than 160,000 tests and continues to play a central role in ensuring that NIF hardware and software meet the requirements of a high reliability facility. This paper describes the TestController system and discusses its use in assuring the quality of software delivered to the NIF.

National Ignition Facility TestController for automated and manual testing

International Nuclear Information System (INIS)

Zielinski, Jason

2012-01-01

The Controls and Information Systems (CIS) organization for the National Ignition Facility (NIF) has developed controls, configuration and analysis software applications that combine for several million lines of code. The team delivers updates throughout the year, from major releases containing hundreds of changes to patch releases containing a small number of focused updates. To ensure the quality of each delivery, manual and automated tests are performed using the NIF TestController test infrastructure. The TestController system provides test inventory management, test planning, automated and manual test execution, release testing summaries and results search, all through a web browser interface. As part of the three-stage software testing strategy, the NIF TestController system helps plan, evaluate and track the readiness of each release to the NIF production environment. After several years of use in testing NIF software applications, the TestController's manual testing features have been leveraged for verifying the installation and operation of NIF Target Diagnostic hardware. The TestController recorded its first test results in 2004. Today, the system has recorded the execution of more than 160,000 tests and continues to play a central role in ensuring that NIF hardware and software meet the requirements of a high reliability facility. This paper describes the TestController system and discusses its use in assuring the quality of software delivered to the NIF.

HSV Serologic Testing for Pregnant Women: Willingness to Be Tested and Factors Affecting Testing

Directory of Open Access Journals (Sweden)

David A. Baker

2011-01-01

Full Text Available Objective. This prospective study was undertaken to evaluate pregnant women's willingness to undergo HSV type-specific serologic testing and factors affecting willingness in an obstetrics/gynecology ambulatory unit. Methods. At prenatal Visit 1, pregnant women (n=303 with no history of HSV-2 were tested for HSV-1/HSV-2 before and after they received counseling on genital and neonatal herpes. Results. In both the Unwilling Subgroup and the group that changed from being willing to being unwilling, the most common reasons for choosing not to be tested were not being at risk for genital herpes, being tested is too personal, and concern about what will be done with the results. Of the 134 participants in the Willing/Tested Subgroup, 27 (20% were HSV-2 seropositive and 81 (60% were HSV-1 seropositive. Conclusions. These results support the feasibility of HSV serologic testing and counseling in pregnant women.

AFFTC Instruction 99-1, Test and Evaluation Test Plans

National Research Council Canada - National Science Library

Crane, Roger

2002-01-01

.... Test Information Sheets (TISs) are actually appendices to test plans and contain sufficient information for use by a flight test engineer to develop flight test cards and for management to discern the overall technical approach being taken...

Test/score/report: Simulation techniques for automating the test process

Science.gov (United States)

Hageman, Barbara H.; Sigman, Clayton B.; Koslosky, John T.

1994-01-01

A Test/Score/Report capability is currently being developed for the Transportable Payload Operations Control Center (TPOCC) Advanced Spacecraft Simulator (TASS) system which will automate testing of the Goddard Space Flight Center (GSFC) Payload Operations Control Center (POCC) and Mission Operations Center (MOC) software in three areas: telemetry decommutation, spacecraft command processing, and spacecraft memory load and dump processing. Automated computer control of the acceptance test process is one of the primary goals of a test team. With the proper simulation tools and user interface, the task of acceptance testing, regression testing, and repeatability of specific test procedures of a ground data system can be a simpler task. Ideally, the goal for complete automation would be to plug the operational deliverable into the simulator, press the start button, execute the test procedure, accumulate and analyze the data, score the results, and report the results to the test team along with a go/no recommendation to the test team. In practice, this may not be possible because of inadequate test tools, pressures of schedules, limited resources, etc. Most tests are accomplished using a certain degree of automation and test procedures that are labor intensive. This paper discusses some simulation techniques that can improve the automation of the test process. The TASS system tests the POCC/MOC software and provides a score based on the test results. The TASS system displays statistics on the success of the POCC/MOC system processing in each of the three areas as well as event messages pertaining to the Test/Score/Report processing. The TASS system also provides formatted reports documenting each step performed during the tests and the results of each step. A prototype of the Test/Score/Report capability is available and currently being used to test some POCC/MOC software deliveries. When this capability is fully operational it should greatly reduce the time necessary

Construction and commissioning test report of the CEDM test facility

Energy Technology Data Exchange (ETDEWEB)

Chung, C. H.; Kim, J. T.; Park, W. M.; Youn, Y. J.; Jun, H. G.; Choi, N. H.; Park, J. K.; Song, C. H.; Lee, S. H.; Park, J. K

2001-02-01

The test facility for performance verification of the control element drive mechanism (CEDM) of next generation power plant was installed at the site of KAERI. The CEDM was featured a mechanism consisting of complicated mechanical parts and electromagnetic control system. Thus, a new CEDM design should go through performance verification tests prior to it's application in a reactor. The test facility can simulate the reactor operating conditions such as temperature, pressure and water quality and is equipped with a test chamber to accomodate a CEDM as installed in the power plant. This test facility can be used for the following tests; endurance test, coil cooling test, power measurement and reactivity rod drop test. The commissioning tests for the test facility were performed up to the CEDM test conditions of 320 C and 150 bar, and required water chemistry was obtained by operating the on-line water treatment system.

Construction and commissioning test report of the CEDM test facility

International Nuclear Information System (INIS)

Chung, C. H.; Kim, J. T.; Park, W. M.; Youn, Y. J.; Jun, H. G.; Choi, N. H.; Park, J. K.; Song, C. H.; Lee, S. H.; Park, J. K.

2001-02-01

The test facility for performance verification of the control element drive mechanism (CEDM) of next generation power plant was installed at the site of KAERI. The CEDM was featured a mechanism consisting of complicated mechanical parts and electromagnetic control system. Thus, a new CEDM design should go through performance verification tests prior to it's application in a reactor. The test facility can simulate the reactor operating conditions such as temperature, pressure and water quality and is equipped with a test chamber to accomodate a CEDM as installed in the power plant. This test facility can be used for the following tests; endurance test, coil cooling test, power measurement and reactivity rod drop test. The commissioning tests for the test facility were performed up to the CEDM test conditions of 320 C and 150 bar, and required water chemistry was obtained by operating the on-line water treatment system

Test chamber

NARCIS (Netherlands)

Leferink, Frank Bernardus Johannes

2009-01-01

A test chamber for measuring electromagnetic radiation emitted by an apparatus to be tested or for exposing an apparatus to be tested to an electromagnetic radiation field. The test chamber includes a reverberation chamber made of a conductive tent fabric. To create a statistically uniform field in

Oral Solid Dosage Form Disintegration Testing - The Forgotten Test.

Science.gov (United States)

Al-Gousous, Jozef; Langguth, Peter

2015-09-01

Since its inception in the 1930s, disintegration testing has become an important quality control (QC) test in pharmaceutical industry, and disintegration test procedures for various dosage forms have been described by the different pharmacopoeias, with harmonization among them still not quite complete. However, because of the fact that complete disintegration does not necessarily imply complete dissolution, much more research has been focused on dissolution rather than on disintegration testing. Nevertheless, owing to its simplicity, disintegration testing seems to be an attractive replacement to dissolution testing as recognized by the International Conference on Harmonization guidelines, in some cases. Therefore, with proper research being carried out to overcome the associated challenges, the full potential of disintegration testing could be tapped saving considerable efforts allocated to QC testing and quality assurance. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Acceptance Testing Of Web Applications With Test Description Language

Directory of Open Access Journals (Sweden)

Łukasz Olek

2014-01-01

Full Text Available Acceptance tests are usually created by a client after a part of a system is implemented. However, some methodologies propose the elaboration of test cases before implementing a system. This approach increases the probability of system implementation that fulfills requirements, but may be problematic for customers and testers. To allow acceptance testing in such conditions, we propose to define test cases by recording them on an interactive mockup (a low detailed user-interface prototype. The paper focuses on Test Description Language, a notation used to store test cases.

Post-test analysis of PANDA test P4

International Nuclear Information System (INIS)

Hart, J.; Woudstra, A.; Koning, H.

1999-01-01

The results of a post-test analysis of the integral system test P4, which has been executed in the PANDA facility at PSI in Switzerland within the framework of Work Package 2 of the TEPSS project are presented. The post-test analysis comprises an evaluation of the PANDA test P4 and a comparison of the test results with the results of simulations using the RELAPS/MOD3.2, TRAC-BF1, and MELCOR 1.8.4 codes. The PANDA test P4 has provided data about how trapped air released from the drywell later in the transient affects PCCS performance in an adequate manner. The well-defined measurements can serve as an important database for the assessment of thermal hydraulic system analysis codes, especially for conditions that could be met in passively operated advanced reactors, i.e. low pressure and small driving forces. Based on the analysis of the test data, the test acceptance criteria have been met. The test P4 has been successfully completed and the instrument readings were with the permitted ranges. The PCCs showed a favorable and robust performance and a wide margin for decay heat removal from the containment. The PANDA P4 test demonstrated that trapped air, released from the drywell later in the transient, only temporarily and only slightly affected the performance of the passive containment cooling system. The analysis of the results of the RELAPS code showed that the overall behaviour of the test has been calculated quite well with regards to pressure, mass flow rates, and pool boil-down. This accounts both for the pre-test and the post-test simulations. However, due to the one-dimensional, stacked-volume modeling of the PANDA DW, WW, and GDCS vessels, 3D-effects such as in-vessel mixing and recirculation could not be calculated. The post-test MELCOR simulation showed an overall behaviour that is comparable to RELAPS. However, MELCOR calculated almost no air trapping in the PCC tubes that could hinder the steam condensation rate. This resulted in lower calculated

Does Refactoring of Test Smells Induce Fixing Flaky Tests?

NARCIS (Netherlands)

Palomba, F.; Zaidman, A.E.

2017-01-01

Regression testing is a core activity that allows developers to ensure that source code changes do not introduce bugs. An important prerequisite then is that test cases are deterministic. However, this is not always the case as some tests suffer from socalled flakiness. Flaky tests have serious

Fuels and materials testing capabilities in Fast Flux Test Facility

International Nuclear Information System (INIS)

Baker, R.B.; Chastain, S.A.; Culley, G.E.; Ethridge, J.L.; Lovell, A.J.; Newland, D.J.; Pember, L.A.; Puigh, R.J.; Waltar, A.E.

1989-01-01

The Fast Flux Test Facility (FFTF) reactor, which started operating in 1982, is a 400 MWt sodium-cooled fast neutron reactor located in Hanford, Washington State, and operated by Westinghouse Hanford Co. under contract with U.S. Department of Energy. The reactor has a wide variety of functions for irradiation tests and special tests, and its major purpose is the irradiation of fuel and material for liquid metal reactor, nuclear reactor and space reactor projects. The review first describes major technical specifications and current conditions of the FFTF reactor. Then the plan for irradiation testing is outlined focusing on general features, fuel pin/assembly irradiation tests, and absorber irradiation tests. Assemblies for special tests include the material open test assembly (MOTA), fuel open test assembly (FOTA), closed loop in-reactor assembly (CLIRA), and other special fuel assemblies. An interim examination and maintenance cell (FFTF/IEM cell) and other hot cells are used for nondestructive/destructive tests and physical/mechanical properties test of material after irradiation. (N.K.)

Slave systems in verbal short-term memory.

Science.gov (United States)

Caplan, David; Waters, Gloria; Howard, David

2012-01-01

The model of performance in short-term memory (STM) tasks that has been most influential in cognitive neuropsychological work on deficits of STM is the "working memory" model mainly associated with the work of Alan Baddeley and his colleagues. This paper reviews the model. We examine the development of this theory in studies that account for STM performances in normal (non-brain-damaged) individuals, and then review the application of this theory to neuropsychological cases and specifications, modifications, and extensions of the theory that have been suggested on the basis of these cases. Our approach is to identify the major phenomena that have been discussed and to examine selected papers dealing with those phenomena in some detail. The main contribution is a review of the WM model that includes both normative and neuropsychological data. We conclude that the WM model has many inconsistencies and empirical inadequacies, and that cognitive neuropsychologists might benefit from considering other models when they attempt to describe and explain patients' performances on STM tasks.

Slave systems in verbal short-term memory

Science.gov (United States)

Caplan, David; Waters, Gloria; Howard, David

2013-01-01

Background The model of performance in short-term memory (STM) tasks that has been most influential in cognitive neuropsychological work on deficits of STM is the “working memory” model mainly associated with the work of Alan Baddeley and his colleagues. Aim This paper reviews the model. We examine the development of this theory in studies that account for STM performances in normal (non-brain-damaged) individuals, and then review the application of this theory to neuropsychological cases and specifications, modifications, and extensions of the theory that have been suggested on the basis of these cases. Our approach is to identify the major phenomena that have been discussed and to examine selected papers dealing with those phenomena in some detail. Main Contribution The main contribution is a review of the WM model that includes both normative and neuropsychological data. Conclusions We conclude that the WM model has many inconsistencies and empirical inadequacies, and that cognitive neuropsychologists might benefit from considering other models when they attempt to describe and explain patients’ performances on STM tasks. PMID:24347786

Everyday memory errors in older adults.

Science.gov (United States)

Ossher, Lynn; Flegal, Kristin E; Lustig, Cindy

2013-01-01

Despite concern about cognitive decline in old age, few studies document the types and frequency of memory errors older adults make in everyday life. In the present study, 105 healthy older adults completed the Everyday Memory Questionnaire (EMQ; Sunderland, Harris, & Baddeley, 1983 , Journal of Verbal Learning and Verbal Behavior, 22, 341), indicating what memory errors they had experienced in the last 24 hours, the Memory Self-Efficacy Questionnaire (MSEQ; West, Thorn, & Bagwell, 2003 , Psychology and Aging, 18, 111), and other neuropsychological and cognitive tasks. EMQ and MSEQ scores were unrelated and made separate contributions to variance on the Mini Mental State Exam (MMSE; Folstein, Folstein, & McHugh, 1975 , Journal of Psychiatric Research, 12, 189), suggesting separate constructs. Tip-of-the-tongue errors were the most commonly reported, and the EMQ Faces/Places and New Things subscales were most strongly related to MMSE. These findings may help training programs target memory errors commonly experienced by older adults, and suggest which types of memory errors could indicate cognitive declines of clinical concern.

The selective disruption of spatial working memory by eye movements.

Science.gov (United States)

Postle, Bradley R; Idzikowski, Christopher; Sala, Sergio Della; Logie, Robert H; Baddeley, Alan D

2006-01-01

In the late 1970s/early 1980s, Baddeley and colleagues conducted a series of experiments investigating the role of eye movements in visual working memory. Although only described briefly in a book, these studies have influenced a remarkable number of empirical and theoretical developments in fields ranging from experimental psychology to human neuropsychology to nonhuman primate electrophysiology. This paper presents, in full detail, three critical studies from this series, together with a recently performed study that includes a level of eye movement measurement and control that was not available for the older studies. Together, the results demonstrate several facts about the sensitivity of visuospatial working memory to eye movements. First, it is eye movement control, not movement per se, that produces the disruptive effects. Second, these effects are limited to working memory for locations and do not generalize to visual working memory for shapes. Third, they can be isolated to the storage/maintenance components of working memory (e.g., to the delay period of the delayed-recognition task). These facts have important implications for models of visual working memory.

WORKING MEMORY AND LEARNING: CONTRIBUTIONS OF NEUROPSYCHOLOGY

Directory of Open Access Journals (Sweden)

Magdalena Lopez

2011-07-01

Full Text Available Actualmente la memoria de trabajo constituye un concepto que ha logrado consenso científico, al ser concebido como un sistema cerebral que proporciona almacenamiento temporal y manipulación de la información necesaria para tareas cognitivas complejas, como la comprensión del lenguaje, el aprendizaje y el razonamiento (Gathercole, Alloway, Willis & Adam, 2006; Baddeley, 1986; Just & Carpenter, 1992. El avance tecnológico y científico en neuropsicología ha posibilitado numerosos aportes, descubrimientos que posibilitan la integración de saberes y experiencias procedentes de campos disciplinares diferentes. El estudio de la organización funcional de la memoria de trabajo, con la aparición de técnicas de neuroimágen, ha posibilitado entender la compleja red de conexiones y relaciones que posee. Se propone una revisión sobre la evolución del concepto de memoria de trabajo para comprender mejor un sistema al que se le atribuye gran incidencia en el aprendizaje.

A test matrix sequencer for research test facility automation

Science.gov (United States)

Mccartney, Timothy P.; Emery, Edward F.

1990-01-01

The hardware and software configuration of a Test Matrix Sequencer, a general purpose test matrix profiler that was developed for research test facility automation at the NASA Lewis Research Center, is described. The system provides set points to controllers and contact closures to data systems during the course of a test. The Test Matrix Sequencer consists of a microprocessor controlled system which is operated from a personal computer. The software program, which is the main element of the overall system is interactive and menu driven with pop-up windows and help screens. Analog and digital input/output channels can be controlled from a personal computer using the software program. The Test Matrix Sequencer provides more efficient use of aeronautics test facilities by automating repetitive tasks that were once done manually.

Irradiation effects test series, test IE-5. Test results report. [PWR

Energy Technology Data Exchange (ETDEWEB)

Croucher, D. W.; Yackle, T. R.; Allison, C. M.; Ploger, S. A.

1978-01-01

Test IE-5, conducted in the Power Burst Facility at the Idaho National Engineering Laboratory, employed three 0.97-m long pressurized water reactor type fuel rods, fabricated from previously irradiated zircaloy-4 cladding and one similar rod fabricated from unirradiated cladding. The objectives of the test were to evaluate the influence of simulated fission products, cladding irradiation damage, and fuel rod internal pressure on pellet-cladding interaction during a power ramp and on fuel rod behavior during film boiling operation. The four rods were subjected to a preconditioning period, a power ramp to an average fuel rod peak power of 65 kW/m, and steady state operation for one hour at a coolant mass flux of 4880 kg/s-m/sup 2/ for each rod. After a flow reduction to 1800 kg/s-m/sup 2/, film boiling occurred on one rod. Additional flow reductions to 970 kg/s-m/sup 2/ produced film boiling on the three remaining fuel rods. Maximum time in film boiling was 80s. The rod having the highest initial internal pressure (8.3 MPa) failed 10s after the onset of film boiling. A second rod failed about 90s after reactor shutdown. The report contains a description of the experiment, the test conduct, test results, and results from the preliminary postirradiation examination. Calculations using a transient fuel rod behavior code are compared with the test results.

Test

DEFF Research Database (Denmark)

Bendixen, Carsten

2014-01-01

Bidrag med en kortfattet, introducerende, perspektiverende og begrebsafklarende fremstilling af begrebet test i det pædagogiske univers.......Bidrag med en kortfattet, introducerende, perspektiverende og begrebsafklarende fremstilling af begrebet test i det pædagogiske univers....

Operational test report for LERF Basin 242AL-44 integrity test

International Nuclear Information System (INIS)

Galioto, T.M.

1994-01-01

This operational test report documents the results of LERF operational testing per operational test procedure (OTP) TFPE-WP-0231, ''LERF Basin Integrity Testing.'' The primary purpose of the OTP was to resolve test exceptions generated as a result of TFPE-WP-0184. The TOP was prepared and performed in accordance with WHC-SD-534-OTP-002, ''Operational Test Plan for the 242-A Evaporator Upgrades and the Liquid Effluent Retention Facility.'' WHC-S-086, ''Specification for Operational Testing of the Liquid Effluent Retention Facility, Basin Integrity Testing,'' identified the test requirements and acceptance criteria. The completed, signed-off test procedure is contained in Appendix A. The test log is contained in Appendix B. Section 2.1 describes all the test exceptions written during performance of the Operational Test Procedure. The test revisions generated during the testing are discussed in Section 2.2. The dispositioned test exception forms are contained in Appendix C

NRC valve performance test program - check valve testing

International Nuclear Information System (INIS)

Jeanmougin, N.M.

1987-01-01

The Valve Performance Test Program addresses the current requirements for testing of pressure isolation valves (PIVs) in light water reactors. Leak rate monitoring is the current method used by operating commercial power plants to survey the condition of their PIVs. ETEC testing of three check valves (4-inch, 6-inch, and 12-inch nominal diameters) indicates that leak rate testing is not a reliable method for detecting impending valve failure. Acoustic emission monitoring of check valves shows promise as a method of detecting loosened internals damage. Future efforts will focus on evaluation of acoustic emission monitoring as a technique for determining check valve condition. Three gate valves also will be tested to evaluate whether the check valve results are applicable to gate type PIVs

Test Anxiety, Computer-Adaptive Testing and the Common Core

Science.gov (United States)

Colwell, Nicole Makas

2013-01-01

This paper highlights the current findings and issues regarding the role of computer-adaptive testing in test anxiety. The computer-adaptive test (CAT) proposed by one of the Common Core consortia brings these issues to the forefront. Research has long indicated that test anxiety impairs student performance. More recent research indicates that…

TESTING TESTS ON ACTIVE GALACTIC NUCLEI MICROVARIABILITY

International Nuclear Information System (INIS)

De Diego, Jose A.

2010-01-01

Literature on optical and infrared microvariability in active galactic nuclei (AGNs) reflects a diversity of statistical tests and strategies to detect tiny variations in the light curves of these sources. Comparison between the results obtained using different methodologies is difficult, and the pros and cons of each statistical method are often badly understood or even ignored. Even worse, improperly tested methodologies are becoming more and more common, and biased results may be misleading with regard to the origin of the AGN microvariability. This paper intends to point future research on AGN microvariability toward the use of powerful and well-tested statistical methodologies, providing a reference for choosing the best strategy to obtain unbiased results. Light curves monitoring has been simulated for quasars and for reference and comparison stars. Changes for the quasar light curves include both Gaussian fluctuations and linear variations. Simulated light curves have been analyzed using χ 2 tests, F tests for variances, one-way analyses of variance and C-statistics. Statistical Type I and Type II errors, which indicate the robustness and the power of the tests, have been obtained in each case. One-way analyses of variance and χ 2 prove to be powerful and robust estimators for microvariations, while the C-statistic is not a reliable methodology and its use should be avoided.

Mononucleosis spot test

Science.gov (United States)

Monospot test; Heterophile antibody test; Heterophile agglutination test; Paul-Bunnell test; Forssman antibody test ... The mononucleosis spot test is done when symptoms of mononucleosis are ... Fatigue Fever Large spleen (possibly) Sore throat Tender ...

Automated test data generation for branch testing using incremental

Indian Academy of Sciences (India)

Cost of software testing can be reduced by automated test data generation to find a minimal set of data that has maximum coverage. Search-based software testing (SBST) is one of the techniques recently used for automated testing task. SBST makes use of control flow graph (CFG) and meta-heuristic search algorithms to ...

BWR Full Integral Simulation Test (FIST). Phase I test results

International Nuclear Information System (INIS)

Hwang, W.S.; Alamgir, M.; Sutherland, W.A.

1984-09-01

A new full height BWR system simulator has been built under the Full-Integral-Simulation-Test (FIST) program to investigate the system responses to various transients. The test program consists of two test phases. This report provides a summary, discussions, highlights and conclusions of the FIST Phase I tests. Eight matrix tests were conducted in the FIST Phase I. These tests have investigated the large break, small break and steamline break LOCA's, as well as natural circulation and power transients. Results and governing phenomena of each test have been evaluated and discussed in detail in this report. One of the FIST program objectives is to assess the TRAC code by comparisons with test data. Two pretest predictions made with TRACB02 are presented and compared with test data in this report

Integrated Test and Evaluation (ITE) Flight Test Series 4

Science.gov (United States)

Marston, Michael

2016-01-01

The integrated Flight Test 4 (FT4) will gather data for the UAS researchers Sense and Avoid systems (referred to as Detect and Avoid in the RTCA SC 228 ToR) algorithms and pilot displays for candidate UAS systems in a relevant environment. The technical goals of FT4 are to: 1) perform end-to-end traffic encounter test of pilot guidance generated by DAA algorithms; 2) collect data to inform the initial Minimum Operational Performance Standards (MOPS) for Detect and Avoid systems. FT4 objectives and test infrastructure builds from previous UAS project simulations and flight tests. NASA Ames (ARC), NASA Armstrong (AFRC), and NASA Langley (LaRC) Research Centers will share responsibility for conducting the tests, each providing a test lab and critical functionality. UAS-NAS project support and participation on the 2014 flight test of ACAS Xu and DAA Self Separation (SS) significantly contributed to building up infrastructure and procedures for FT3 as well. The DAA Scripted flight test (FT4) will be conducted out of NASA Armstrong over an eight-week period beginning in April 2016.

AST Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/asttest.html AST Test To use the sharing features on this page, please enable JavaScript. What is an AST Test? AST (aspartate aminotransferase) is an enzyme that is ...

Chlamydia Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/chlamydiatest.html Chlamydia Test To use the sharing features on this page, please enable JavaScript. What is a Chlamydia Test? Chlamydia is one of the most common sexually ...

Lipase Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/lipasetest.html Lipase Test To use the sharing features on this page, please enable JavaScript. What is a lipase test? Lipase is a type of protein made by ...

Cortisol Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/cortisoltest.html Cortisol Test To use the sharing features on this page, please enable JavaScript. What is a Cortisol Test? Cortisol is a hormone that affects almost every ...

Nuclear Fuel Test Rod Fabrication for Data Acquisition Test

International Nuclear Information System (INIS)

Joung, Chang-Young; Hong, Jin-Tae; Kim, Ka-Hye; Huh, Sung-Ho

2014-01-01

A nuclear fuel test rod must be fabricated with precise welding and assembly technologies, and confirmed for their soundness. Recently, we have developed various kinds of processing systems such as an orbital TIG welding system, a fiber laser welding system, an automated drilling system and a helium leak analyzer, which are able to fabricate the nuclear fuel test rods and rigs, and keep inspection systems to confirm the soundness of the nuclear fuel test rods and rids. The orbital TIG welding system can be used with two kinds of welding methods. One can perform the round welding for end-caps of a nuclear fuel test rod by an orbital head mounted in a low-pressure chamber. The other can do spot welding for a pin-hole of a nuclear fuel test rod in a high-pressure chamber to fill up helium gas of high pressure. The fiber laser welding system can weld cylindrical and 3 axis samples such as parts of a nuclear fuel test rod and instrumentation sensors which is moved by an index chuck and a 3 axis (X, Y, Z) servo stage controlled by the CNC program. To measure the real-time temperature change at the center of the nuclear fuel during the irradiation test, a thermocouple should be instrumented at that position. Therefore, a hole needs to be made at the center of fuel pellet to instrument the thermocouple. An automated drilling system can drill a fine hole into a fuel pellet without changing tools or breaking the work-piece. The helium leak analyzer (ASM-380 model of DEIXEN Co.) can check the leak of the nuclear fuel test rod filled with helium gas. This paper describes not only the assembly and fabrication methods used by the process systems, but also the results of the data acquisition test for the nuclear fuel test rod. A nuclear fuel test rod for the data acquisition test was fabricated using the welding and assembling echnologies acquired from previous tests

Nuclear Fuel Test Rod Fabrication for Data Acquisition Test

Energy Technology Data Exchange (ETDEWEB)

Joung, Chang-Young; Hong, Jin-Tae; Kim, Ka-Hye; Huh, Sung-Ho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-10-15

A nuclear fuel test rod must be fabricated with precise welding and assembly technologies, and confirmed for their soundness. Recently, we have developed various kinds of processing systems such as an orbital TIG welding system, a fiber laser welding system, an automated drilling system and a helium leak analyzer, which are able to fabricate the nuclear fuel test rods and rigs, and keep inspection systems to confirm the soundness of the nuclear fuel test rods and rids. The orbital TIG welding system can be used with two kinds of welding methods. One can perform the round welding for end-caps of a nuclear fuel test rod by an orbital head mounted in a low-pressure chamber. The other can do spot welding for a pin-hole of a nuclear fuel test rod in a high-pressure chamber to fill up helium gas of high pressure. The fiber laser welding system can weld cylindrical and 3 axis samples such as parts of a nuclear fuel test rod and instrumentation sensors which is moved by an index chuck and a 3 axis (X, Y, Z) servo stage controlled by the CNC program. To measure the real-time temperature change at the center of the nuclear fuel during the irradiation test, a thermocouple should be instrumented at that position. Therefore, a hole needs to be made at the center of fuel pellet to instrument the thermocouple. An automated drilling system can drill a fine hole into a fuel pellet without changing tools or breaking the work-piece. The helium leak analyzer (ASM-380 model of DEIXEN Co.) can check the leak of the nuclear fuel test rod filled with helium gas. This paper describes not only the assembly and fabrication methods used by the process systems, but also the results of the data acquisition test for the nuclear fuel test rod. A nuclear fuel test rod for the data acquisition test was fabricated using the welding and assembling echnologies acquired from previous tests.

AZ-101 Mixer Pump Test Qualification Test Procedures (QTP)

International Nuclear Information System (INIS)

THOMAS, W.K.

2000-01-01

Describes the Qualification test procedure for the AZ-101 Mixer Pump Data Acquisition System (DAS). The purpose of this Qualification Test Procedure (QTP) is to confirm that the AZ-101 Mixer Pump System has been properly programmed and hardware configured correctly. This QTP will test the software setpoints for the alarms and also check the wiring configuration from the SIMcart to the HMI. An Acceptance Test Procedure (ATP), similar to this QTP will be performed to test field devices and connections from the field

Light Duty Utility Arm system pre-operational (cold test) test plan

International Nuclear Information System (INIS)

Bennett, K.L.

1995-01-01

The Light Duty Utility (LDUA) Cold Test Facility, located in the Hanford 400 Area, will be used to support cold testing (pre- operational tests) of LDUA subsystems. Pre-operational testing is composed of subsystem development testing and rework activities, and integrated system qualification testing. Qualification testing will be conducted once development work is complete and documentation is under configuration control. Operational (hot) testing of the LDUA system will follow the testing covered in this plan and will be covered in a separate test plan

Coccidioides precipitin test

Science.gov (United States)

Coccidioidomycosis antibody test; Coccidioides blood test; Valley fever blood test ... There is no special preparation for the test. ... The precipitin test is one of several tests that can be done to determine if you are infected with coccidioides, which ...

Syphilis Test

Science.gov (United States)

... Genetic Tests for Targeted Cancer Therapy Glucose Tests Gonorrhea Testing Gram Stain Growth Hormone Haptoglobin hCG Pregnancy ... treated for another sexually transmitted disease , such as gonorrhea Is pregnant, during the first prenatal visit and ...

New Graphical Methods and Test Statistics for Testing Composite Normality

Directory of Open Access Journals (Sweden)

Marc S. Paolella

2015-07-01

Full Text Available Several graphical methods for testing univariate composite normality from an i.i.d. sample are presented. They are endowed with correct simultaneous error bounds and yield size-correct tests. As all are based on the empirical CDF, they are also consistent for all alternatives. For one test, called the modified stabilized probability test, or MSP, a highly simplified computational method is derived, which delivers the test statistic and also a highly accurate p-value approximation, essentially instantaneously. The MSP test is demonstrated to have higher power against asymmetric alternatives than the well-known and powerful Jarque-Bera test. A further size-correct test, based on combining two test statistics, is shown to have yet higher power. The methodology employed is fully general and can be applied to any i.i.d. univariate continuous distribution setting.

Nuclear stress test

Science.gov (United States)

... Persantine stress test; Thallium stress test; Stress test - nuclear; Adenosine stress test; Regadenoson stress test; CAD - nuclear stress; Coronary artery disease - nuclear stress; Angina - nuclear ...

Pharmacogenomic Testing

Science.gov (United States)

... your family Plan for the future Insurance and financial planning Transition for children Emergency preparedness Testing & Services Testing ... Support Genetic Disease Information Find a Support Group Financial Planning Who Should I Tell? Genetic Testing & Counseling Compensation ...

Predictive Testing

Science.gov (United States)

... your family Plan for the future Insurance and financial planning Transition for children Emergency preparedness Testing & Services Testing ... Support Genetic Disease Information Find a Support Group Financial Planning Who Should I Tell? Genetic Testing & Counseling Compensation ...

Nationale Test

DEFF Research Database (Denmark)

2009-01-01

Hvad er egentlig formålet med de nationale test? Bliver eleverne klogere af at blive testet? Og er der en sammenhæng mellem bandekrig og nationale test? Fysisk medie: dpu.dk/tv......Hvad er egentlig formålet med de nationale test? Bliver eleverne klogere af at blive testet? Og er der en sammenhæng mellem bandekrig og nationale test? Fysisk medie: dpu.dk/tv...

A computer-controlled automated test system for fatigue and fracture testing

International Nuclear Information System (INIS)

Nanstad, R.K.; Alexander, D.J.; Swain, R.L.; Hutton, J.T.; Thomas, D.L.

1989-01-01

A computer-controlled system consisting of a servohydraulic test machine, an in-house designed test controller, and a desktop computer has been developed for performing automated fracture toughness and fatigue crack growth testing both in the laboratory and in hot cells for remote testing of irradiated specimens. Both unloading compliance and dc-potential drop can be used to monitor crack growth. The test controller includes a dc-current supply programmer, a function generator for driving the servohydraulic test machine to required test outputs, five measurement channels (each consisting of low-pass filter, track/hold amplifier, and 16-bit analog-to-digital converter), and digital logic for various control and data multiplexing functions. The test controller connects to the computer via a 16-bit wide photo-isolated bidirectional bus. The computer, a Hewlett-Packard series 200/300, inputs specimen and test parameters from the operator, configures the test controller, stores test data from the test controller in memory, does preliminary analysis during the test, and records sensor calibrations, specimen and test parameters, and test data on flexible diskette for later recall and analysis with measured initial and final crack length information. During the test, the operator can change test parameters as necessary. 24 refs., 6 figs

Heart failure - tests

Science.gov (United States)

CHF - tests; Congestive heart failure - tests; Cardiomyopathy - tests; HF - tests ... the best test to: Identify which type of heart failure (systolic, diastolic, valvular) Monitor your heart failure and ...

5-HIAA Test

Science.gov (United States)

... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

Uric Acid Test

Science.gov (United States)

... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

Direct Antiglobulin Test

Science.gov (United States)

... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

CK-MB Test

Science.gov (United States)

... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

Understanding Your Tests

Science.gov (United States)

... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

Myasthenia Gravis Tests

Science.gov (United States)

... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

The comparison of the unit test tools JUnit and TestNG

OpenAIRE

Šarkanj, Aleš

2011-01-01

Testing holds an important role in developing software. It is a process ensuring software works as expected. An important part of testing is unit testing as the basic testing level. The purpose of this thesis is comparing JUnit and TestNG, two of the most popular unit testing tools in Java. In the first part we will present testing and its purpose within software development. We will also present the basic terminology and levels of testing. Further on the area of unit testing will be pr...

The test-retest reliability and criterion validity of a high-intensity, netball-specific circuit test: The Net-Test.

Science.gov (United States)

Mungovan, Sean F; Peralta, Paula J; Gass, Gregory C; Scanlan, Aaron T

2018-04-12

To examine the test-retest reliability and criterion validity of a high-intensity, netball-specific fitness test. Repeated measures, within-subject design. Eighteen female netball players competing in an international competition completed a trial of the Net-Test, which consists of 14 timed netball-specific movements. Players also completed a series of netball-relevant criterion fitness tests. Ten players completed an additional Net-Test trial one week later to assess test-retest reliability using intraclass correlation coefficient (ICC), typical error of measurement (TEM), and coefficient of variation (CV). The typical error of estimate expressed as CV and Pearson correlations were calculated between each criterion test and Net-Test performance to assess criterion validity. Five movements during the Net-Test displayed moderate ICC (0.84-0.90) and two movements displayed high ICC (0.91-0.93). Seven movements and heart rate taken during the Net-Test held low CV (Test possessed low CV and significant (pTest possesses acceptable reliability for the assessment of netball fitness. Further, the high criterion validity for the Net-Test suggests a range of important netball-specific fitness elements are assessed in combination. Copyright © 2018 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

An innovative approach for testing bioinformatics programs using metamorphic testing

Directory of Open Access Journals (Sweden)

Liu Huai

2009-01-01

Full Text Available Abstract Background Recent advances in experimental and computational technologies have fueled the development of many sophisticated bioinformatics programs. The correctness of such programs is crucial as incorrectly computed results may lead to wrong biological conclusion or misguide downstream experimentation. Common software testing procedures involve executing the target program with a set of test inputs and then verifying the correctness of the test outputs. However, due to the complexity of many bioinformatics programs, it is often difficult to verify the correctness of the test outputs. Therefore our ability to perform systematic software testing is greatly hindered. Results We propose to use a novel software testing technique, metamorphic testing (MT, to test a range of bioinformatics programs. Instead of requiring a mechanism to verify whether an individual test output is correct, the MT technique verifies whether a pair of test outputs conform to a set of domain specific properties, called metamorphic relations (MRs, thus greatly increases the number and variety of test cases that can be applied. To demonstrate how MT is used in practice, we applied MT to test two open-source bioinformatics programs, namely GNLab and SeqMap. In particular we show that MT is simple to implement, and is effective in detecting faults in a real-life program and some artificially fault-seeded programs. Further, we discuss how MT can be applied to test programs from various domains of bioinformatics. Conclusion This paper describes the application of a simple, effective and automated technique to systematically test a range of bioinformatics programs. We show how MT can be implemented in practice through two real-life case studies. Since many bioinformatics programs, particularly those for large scale simulation and data analysis, are hard to test systematically, their developers may benefit from using MT as part of the testing strategy. Therefore our work

Convergent validity test, construct validity test and external validity test of the David Liberman algorithm

Directory of Open Access Journals (Sweden)

David Maldavsky

2013-08-01

Full Text Available The author first exposes a complement of a previous test about convergent validity, then a construct validity test and finally an external validity test of the David Liberman algorithm.  The first part of the paper focused on a complementary aspect, the differential sensitivity of the DLA 1 in an external comparison (to other methods, and 2 in an internal comparison (between two ways of using the same method, the DLA.  The construct validity test exposes the concepts underlined to DLA, their operationalization and some corrections emerging from several empirical studies we carried out.  The external validity test examines the possibility of using the investigation of a single case and its relation with the investigation of a more extended sample.

Parametric Sensitivity Tests- European PEM Fuel Cell Stack Test Procedures

DEFF Research Database (Denmark)

Araya, Samuel Simon; Andreasen, Søren Juhl; Kær, Søren Knudsen

2014-01-01

performed based on test procedures proposed by a European project, Stack-Test. The sensitivity of a Nafion-based low temperature PEMFC stack’s performance to parametric changes was the main objective of the tests. Four crucial parameters for fuel cell operation were chosen; relative humidity, temperature......As fuel cells are increasingly commercialized for various applications, harmonized and industry-relevant test procedures are necessary to benchmark tests and to ensure comparability of stack performance results from different parties. This paper reports the results of parametric sensitivity tests......, pressure, and stoichiometry at varying current density. Furthermore, procedures for polarization curve recording were also tested both in ascending and descending current directions....

Analysing Test-Takers’ Views on a Computer-Based Speaking Test

Directory of Open Access Journals (Sweden)

Marian Amengual-Pizarro

2017-11-01

Full Text Available This study examines test-takers’ views on a computer-delivered speaking test in order to investigate the aspects they consider most relevant in technology-based oral assessment, and to explore the main advantages and disadvantages computer-based tests may offer as compared to face-to-face speaking tests. A small-scale open questionnaire was administered to 80 test-takers who took the APTIS speaking test at the Universidad de Alcalá in April 2016. Results reveal that examinees believe computer-based tests provide a valid measure of oral competence in English and are considered to be an adequate method for the assessment of speaking. Interestingly, the data suggest that personal characteristics of test-takers seem to play a key role in deciding upon the most suitable and reliable delivery mode.

Heavy Metal Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/heavymetalbloodtest.html Heavy Metal Blood Test To use the sharing features ... this page, please enable JavaScript. What is a Heavy Metal Blood Test? A heavy metal blood test ...

Lipoprotein (a) Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/lipoproteinabloodtest.html Lipoprotein (a) Blood Test To use the sharing features ... this page, please enable JavaScript. What is a Lipoprotein (a) Blood Test? A lipoprotein (a) test measures ...

Injecting Errors for Testing Built-In Test Software

Science.gov (United States)

Gender, Thomas K.; Chow, James

2010-01-01

Two algorithms have been conceived to enable automated, thorough testing of Built-in test (BIT) software. The first algorithm applies to BIT routines that define pass/fail criteria based on values of data read from such hardware devices as memories, input ports, or registers. This algorithm simulates effects of errors in a device under test by (1) intercepting data from the device and (2) performing AND operations between the data and the data mask specific to the device. This operation yields values not expected by the BIT routine. This algorithm entails very small, permanent instrumentation of the software under test (SUT) for performing the AND operations. The second algorithm applies to BIT programs that provide services to users application programs via commands or callable interfaces and requires a capability for test-driver software to read and write the memory used in execution of the SUT. This algorithm identifies all SUT code execution addresses where errors are to be injected, then temporarily replaces the code at those addresses with small test code sequences to inject latent severe errors, then determines whether, as desired, the SUT detects the errors and recovers

HYBRID DATA APPROACH FOR SELECTING EFFECTIVE TEST CASES DURING THE REGRESSION TESTING

OpenAIRE

Mohan, M.; Shrimali, Tarun

2017-01-01

In the software industry, software testing becomes more important in the entire software development life cycle. Software testing is one of the fundamental components of software quality assurances. Software Testing Life Cycle (STLC)is a process involved in testing the complete software, which includes Regression Testing, Unit Testing, Smoke Testing, Integration Testing, Interface Testing, System Testing & etc. In the STLC of Regression testing, test case selection is one of the most importan...

Anion Gap Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... https://medlineplus.gov/labtests/aniongapbloodtest.html Anion Gap Blood Test To use the sharing features on this page, please enable JavaScript. What is an Anion Gap Blood Test? An anion gap blood test is a way ...

Testing experience with fast flux test facility

International Nuclear Information System (INIS)

Noordhoff, B.H.; McGough, C.B.; Nolan, J.E.

1975-01-01

Early FFTF project planning emphasized partial and full-scale testing of major reactor and plant prototype components under expected environmental conditions, excluding radiation fields. Confirmation of component performance during FFTF service was considered essential before actual FFTF startup, to provide increased assurance against FFTF startup delays or operational difficulties and downtime. Several new sodium facilities were constructed, and confirmation tests on the prototype components are now in progress. Test conditions and results to date are reported for the primary pump, intermediate heat exchanger, sodium-to-air dump heat exchanger, large and small sodium valves, purification cold trap, in-vessel handling machine, instrument tree, core restraint, control rod system, low-level flux monitor, closed loop ex-vessel machine, refueling equipment, and selected maintenance equipment. The significance and contribution of these tests to the FFTF and Liquid Metal Fast Breeder Reactor (LMFBR) program are summarized. (U.S.)

The hardness test: a real mechanical test

International Nuclear Information System (INIS)

Rezakhanlou, R.

1993-02-01

During the service life, the mechanical properties of the PWR components change. It is necessary to determine precisely this evolution, but it is not always possible to draw a sample with the adequate size for the characterization. For this latter case we intend to calculate the stress-strain curve of a material from a hardness test results, because it is appropriate for testing on site and do not need any particular sample shape. This paper is the first bibliographical part of a larger study on the relation between the values measured during a hardness test (applied load, indentation diameter) and the mechanical properties of a solid obtained by a traction test. We have treated the problem within the general setting of two solids in contact. Thus, we expose general elastic, elasto-plastic and plastic models describing the indentation of a solid by a rigid indenter

Drug Testing

Science.gov (United States)

... testing, substance abuse testing, toxicology screen, tox screen, sports doping tests What is it used for? Drug screening is used to find out whether or not a person has taken a certain drug or drugs. It ... Sports organizations. Professional and collegiate athletes usually need to ...

HIV Testing

Science.gov (United States)

... Abroad Treatment Basic Statistics Get Tested Find an HIV testing site near you. Enter ZIP code or city Follow HIV/AIDS CDC HIV CDC HIV/AIDS See RSS | ... All Collapse All Should I get tested for HIV? CDC recommends that everyone between the ages of ...

Testing power-law cross-correlations: Rescaled covariance test

Czech Academy of Sciences Publication Activity Database

Krištoufek, Ladislav

2013-01-01

Roč. 86, č. 10 (2013), 418-1-418-15 ISSN 1434-6028 R&D Projects: GA ČR GA402/09/0965 Institutional support: RVO:67985556 Keywords : power-law cross-correlations * testing * long-term memory Subject RIV: AH - Economics Impact factor: 1.463, year: 2013 http://library.utia.cas.cz/separaty/2013/E/kristoufek-testing power-law cross-correlations rescaled covariance test.pdf

Ethnic Comparisons in HIV Testing Attitudes, HIV Testing, and Predictors of HIV Testing Among Black and White College Students.

Science.gov (United States)

Moore, Melanie P; Javier, Sarah J; Abrams, Jasmine A; McGann, Amanda Wattenmaker; Belgrave, Faye Z

2017-08-01

This study's primary aim was to examine ethnic differences in predictors of HIV testing among Black and White college students. We also examined ethnic differences in sexual risk behaviors and attitudes toward the importance of HIV testing. An analytic sample of 126 Black and 617 White undergraduatestudents aged 18-24 were analyzed for a subset of responses on the American College Health Association-National College Health Assessment II (ACHA-NCHA II) (2012) pertaining to HIV testing, attitudes about the importance of HIV testing, and sexual risk behaviors. Predictors of HIV testing behavior were analyzed using logistic regression. t tests and chi-square tests were performed to access differences in HIV test history, testing attitudes, and sexual risk behaviors. Black students had more positive attitudes toward testing and were more likely to have been tested for HIV compared to White students. A greater number of sexual partners and more positive HIV testing attitudes were significant predictors of HIV testing among White students, whereas relationship status predicted testing among Black students. Older age and history of ever having sex were significant predictors of HIV testing for both groups. There were no significant differences between groups in number of sexual partners or self-reports in history of sexual experience (oral, vaginal, or anal). Factors that influence HIV testing may differ across racial/ethnic groups. Findings support the need to consider racial/ethnic differences in predictors of HIV testing during the development and tailoring of HIV testing prevention initiatives targeting college students.

LOBI test BT-15/BT-16 pre-test calculation

International Nuclear Information System (INIS)

Holmes, B.J.

1991-03-01

LOBI is a higher pressure, electrically heated integral system facility simulating a KWU 1300 MW PWR scaled 1:712 by volume, although full scale has been maintained in the vertical direction. In order to complete the test programme before the facility is closed in 1991 a number of tests have been performed in tandem, where the test procedures were compatible. BT-15/BT-16 is one such composite test. In their original form both tests BT-15 and BT-16 simulated a loss of main feedwater transient with delayed auxiliary feedwater injection, with the pumps running in BT-15 and tripped in BT-16. The aim of each test was to investigate the loss of primary/secondary heat transfer as the steam generator secondary sides boiled down, and the subsequent recovery of heat transfer as the auxiliary feedwater was tripped on. Due to a re-scheduling of the test programme there was insufficient time to perform sensitivity studies and so only one, base case, calculation is presented. (author)

Moisture related test protocols for HVS testing

CSIR Research Space (South Africa)

Denneman, E

2008-10-01

Full Text Available outcomes of HVS tests where the moisture condition of the pavement or specific layers in the pavement is under investigation for a specific test. Practical guidance is then provided on the potential systems (how to manage the moisture – hardware) as well...

The Caledonian face test: A new test of face discrimination.

Science.gov (United States)

Logan, Andrew J; Wilkinson, Frances; Wilson, Hugh R; Gordon, Gael E; Loffler, Gunter

2016-02-01

This study aimed to develop a clinical test of face perception which is applicable to a wide range of patients and can capture normal variability. The Caledonian face test utilises synthetic faces which combine simplicity with sufficient realism to permit individual identification. Face discrimination thresholds (i.e. minimum difference between faces required for accurate discrimination) were determined in an "odd-one-out" task. The difference between faces was controlled by an adaptive QUEST procedure. A broad range of face discrimination sensitivity was determined from a group (N=52) of young adults (mean 5.75%; SD 1.18; range 3.33-8.84%). The test is fast (3-4 min), repeatable (test-re-test r(2)=0.795) and demonstrates a significant inversion effect. The potential to identify impairments of face discrimination was evaluated by testing LM who reported a lifelong difficulty with face perception. While LM's impairment for two established face tests was close to the criterion for significance (Z-scores of -2.20 and -2.27) for the Caledonian face test, her Z-score was -7.26, implying a more than threefold higher sensitivity. The new face test provides a quantifiable and repeatable assessment of face discrimination ability. The enhanced sensitivity suggests that the Caledonian face test may be capable of detecting more subtle impairments of face perception than available tests. Copyright © 2015 Elsevier Ltd. All rights reserved.

Materials testing 1985

International Nuclear Information System (INIS)

1985-01-01

The following subjects were dealt with at the meeting: Testing with vibration loads; Hardness testing; Calibration of test devices and equipment; Test technique for compound materials; Vibration strength testing and expense of experiments; Solving problems in introducing forces into samples and components and process of ambulant materials testing. There are 17 separate abstracts from among 43 lectures. (orig./PW) [de

Pragmatics of Testing

Directory of Open Access Journals (Sweden)

İsmail Fırat ALTAY

2007-10-01

Full Text Available Teaching of a language is a very complicated issue and testing is anindispensable part of this matter. Thanks to testing teachers can assess efficiency ofteaching and learning atmosphere, and can get feedback about their learners. In order torealize this, a test should have some qualifications. One of these qualifications is aboutpragmatics. This paper aims at explaining what makes a test pragmatic and howpragmatic tests can be formed. So, examples of pragmatic tests of different types arepresented with explanations. Their pragmatic components and nature are focused on bygiving example test items on the problematic area of test questions prepared. Finally,the writer states his last words by making further comments and explanations onpragmatics of testing in the conclusion part.

Numerical simulations of rubber bearing tests and shaking table tests

International Nuclear Information System (INIS)

Hirata, K.; Matsuda, A.; Yabana, S.

2002-01-01

Test data concerning rubber bearing tests and shaking table tests of base-isolated model conducted by CRIEPI are provided to the participants of Coordinated Research Program (CRP) on 'Intercomparison of Analysis Methods for predicting the behaviour of Seismically Isolated Nuclear Structure', which is organized by International Atomic Energy Agency (IAEA), for the comparison study of numerical simulation of base-isolated structure. In this paper outlines of the test data provided and the numerical simulations of bearing tests and shaking table tests are described. Using computer code ABAQUS, numerical simulations of rubber bearing tests are conducted for NRBs, LRBs (data provided by CRIEPI) and for HDRs (data provided by ENEA/ENEL and KAERI). Several strain energy functions are specified according to the rubber material test corresponding to each rubber bearing. As for lead plug material in LRB, mechanical characteristics are reevaluated and are made use of. Simulation results for these rubber bearings show satisfactory agreement with the test results. Shaking table test conducted by CRIEPI is of a base isolated rigid mass supported by LRB. Acceleration time histories, displacement time histories of the isolators as well as cyclic loading test data of the LRB used for the shaking table test are provided to the participants of the CRP. Simulations of shaking table tests are conducted for this rigid mass, and also for the steel frame model which is conducted by ENEL/ENEA. In the simulation of the rigid mass model test, where LRBs are used, isolators are modeled either by bilinear model or polylinear model. In both cases of modeling of isolators, simulation results show good agreement with the test results. In the case of the steel frame model, where HDRs are used as isolators, bilinear model and polylinear model are also used for modeling isolators. The response of the model is simulated comparatively well in the low frequency range of the floor response, however, in

Crippling load test of Budd Pioneer Car 244, test 3.

Science.gov (United States)

2013-04-01

This report summarizes Test 3, a crippling load test on Budd Pioneer Car 244, conducted on June 28, 2011. Before the crippling load test, Transportation Technology Center, Inc., conducted two 800,000-pound (lb) quasi-static tests on Car 244 in accord...

Test-Taking Strategies in L2 Assessment: The Test of English for International Communication Speaking Test.

Science.gov (United States)

Huang, Heng-Tsung Danny

2016-08-01

This research explored the test-taking strategies associated with the Test of English for International Communication Speaking Test (TOEIC-S) and their relationship with test performance. Capitalizing on two sets of TOEIC-S and a custom-made strategy inventory, the researcher collected data from a total of 215 Taiwanese English learners consisting of 84 males and 131 females with an average age of 20.1 years (SD = 2.6). Quantitative data analysis gave rise to three major findings. First, TOEIC-S test-taking strategy use constituted a multi-faceted construct that involved multiple types of strategic behaviors. Second, these strategic behaviors matched those allowing test-takers to communicate both in real life and in the workplace. Third, communication strategy use and cognitive strategy use both contributed significantly to TOEIC-S performance. © The Author(s) 2016.

Aerospace Structures Test Facility Environmental Test Chambers (ETC)

Data.gov (United States)

Federal Laboratory Consortium — Purpose: The ETCs test the structural integrity of aerospace structures in representative operating temperatures and aerodynamic load distributions. The test article...

Goodness of Fit Test and Test of Independence by Entropy

Directory of Open Access Journals (Sweden)

M. Sharifdoost

2009-06-01

Full Text Available To test whether a set of data has a specific distribution or not, we can use the goodness of fit test. This test can be done by one of Pearson X 2 -statistic or the likelihood ratio statistic G 2 , which are asymptotically equal, and also by using the Kolmogorov-Smirnov statistic in continuous distributions. In this paper, we introduce a new test statistic for goodness of fit test which is based on entropy distance, and which can be applied for large sample sizes. We compare this new statistic with the classical test statistics X 2 , G 2 , and Tn by some simulation studies. We conclude that the new statistic is more sensitive than the usual statistics to the rejection of distributions which are almost closed to the desired distribution. Also for testing independence, a new test statistic based on mutual information is introduced

Endurance test for IR rig for RI production assembly (test procedure)

International Nuclear Information System (INIS)

Chung, Heung June; Ryu, Jeong Soo

2000-08-01

This test procedure details the test loop, test method, and test procedure for pressure drop, vibration and endurance test of IR Rig for RI production. From the pressure drop test, the hydraulic design requirements of the capsule are verified. HANARO limit condition is checked and the compatibility with HANARO core is verified. From flow induced vibration test vibration frequency and displacement are investigated. The wear of IR Rig is investigated through endurance test, and these data are used to evaluate the expected wear at maximum resident time of the IR Rig for RI production

Summary of ALSEP Test Loop Solvent Irradiation Testing

Energy Technology Data Exchange (ETDEWEB)

Peterman, Dean Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Olson, Lonnie Gene [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-08-01

Separating the minor actinide elements (americium and curium) from the fission product lanthanides is an important step in closing the nuclear fuel cycle. Isolating the minor actinides will allow transmuting them to short lived or stable isotopes in fast reactors, thereby reducing the long-term hazard associated with these elements. The Actinide Lanthanide Separation Process (ALSEP) is being developed by the DOE-NE Material Recovery and Waste Form Development Campaign to accomplish this separation with a single process. To develop a fundamental understanding of the solvent degradation mechanisms for the ALSEP Process, testing was performed in the INL Radiolysis/Hydrolysis Test Loop for the extraction section of the ALSEP flowsheet. This work culminated in the completion of the level two milestone (M2FT-16IN030102021) "Complete ALSEP test loop solvent irradiation test.” This report summarizes the testing performed and the impact of radiation on the ALSEP Process performance as a function of dose.

Mollusc reproductive toxicity tests - Development and validation of test guidelines

DEFF Research Database (Denmark)

Ducrot, Virginie; Holbech, Henrik; Kinnberg, Karin Lund

. Draft standard operating procedures (SOPs) have been designed based upon literature and expert knowledge from project partners. Pre-validation studies have been implemented to validate the proposed test conditions and identify issues in performing the SOPs and analyzing test results. Pre-validation work......The Organisation for Economic Cooperation and Development is promoting the development and validation of mollusc toxicity tests within its test guidelines programme, eventually aiming for the standardization of mollusc apical toxicity tests. Through collaborative work between academia, industry...... and stakeholders, this study aims to develop innovative partial life-cycle tests on the reproduction of the freshwater gastropods Potamopyrgus antipodarum and Lymnaea stagnalis, which are relevant candidate species for the standardization of mollusc apical toxicity tests assessing reprotoxic effects of chemicals...

[Using projective tests in forensic psychiatry may lead to wrong conclusions. Only empirically tested tests should be used].

Science.gov (United States)

Trygg, L; Dåderman, A M; Wiklund, N; Meurling, A W; Lindgren, M; Lidberg, L; Levander, S

2001-06-27

The use of projective and psychometric psychological tests at the Department of Forensic Psychiatry in Stockholm (Huddinge), Sweden, was studied for a population of 60 men, including many patients with neuropsychological disabilities and multiple psychiatric disorders. The results showed that the use of projective tests like Rorschach, Object Relations Test, and House-Tree-Person was more frequent than the use of objective psychometric tests. Neuropsychological test batteries like the Halstead-Reitan Neuropsychological Test Battery or Luria-Nebraska Neuropsychological Battery were not used. The majority of patients were, however, assessed by intelligence scales like the WAIS-R. The questionable reliability and validity of the projective tests, and the risk of subjective interpretations, raise a problem when used in a forensic setting, since the courts' decisions about a sentence to prison or psychiatric care is based on the forensic psychiatric assessment. The use of objective psychometric neuropsychological tests and personality tests is recommended.

VDRL test

Science.gov (United States)

... confirmed with another blood test to make the diagnosis of syphilis. Normal value ranges may vary slightly among different ... broken) Alternative Names Venereal disease research ... laboratory test (VDRL) – serum. In: Chernecky CC, Berger BJ, eds. Laboratory Tests and Diagnostic Procedures . 6th ed. St Louis, MO: Elsevier Saunders; ...

Analog automatic test pattern generation for quasi-static structural test.

NARCIS (Netherlands)

Zjajo, A.; Pineda de Gyvez, J.

2009-01-01

A new approach for structural, fault-oriented analog test generation methodology to test for the presence of manufacturing-related defects is proposed. The output of the test generator consists of optimized test stimuli, fault coverage and sampling instants that are sufficient to detect the failure

Multiple Choice Testing and the Retrieval Hypothesis of the Testing Effect

Science.gov (United States)

Sensenig, Amanda E.

2010-01-01

Taking a test often leads to enhanced later memory for the tested information, a phenomenon known as the "testing effect". This memory advantage has been reliably demonstrated with recall tests but not multiple choice tests. One potential explanation for this finding is that multiple choice tests do not rely on retrieval processes to the same…

CSF-VDRL test

Science.gov (United States)

... test - CSF; Neurosyphilis - VDRL Images CSF test for syphilis References Chernecky CC, Berger BJ. Venereal disease research laboratory test (VDRL), test, cerebrospinal fluid – specimen. In: Chernecky CC, Berger BJ, eds. Laboratory Tests and Diagnostic Procedures . 6th ed. St Louis, MO: Elsevier Saunders; ...

Relay test program

International Nuclear Information System (INIS)

Bandyopadhyay, K.K.; Kunkel, C.; Shteyngart, S.

1994-02-01

This report presents the results of a relay test program conducted by Brookhaven National Laboratory (BNL) under the sponsorship of the US Nuclear Regulatory Commission (NRC). The program is a continuation of an earlier test program the results of which were published in NUREG/CR-4867. The current program was carried out in two phases: electrical testing and vibration testing. The objective was primarily to focus on the electrical discontinuity or continuity of relays and circuit breaker tripping mechanisms subjected to electrical pulses and vibration loads. The electrical testing was conducted by KEMA-Powertest Company and the vibration testing was performed at Wyle Laboratories, Huntsville, Alabama. This report discusses the test procedures, presents the test data, includes an analysis of the data and provides recommendations regarding reliable relay testing

Gas Test Loop Booster Fuel Hydraulic Testing

International Nuclear Information System (INIS)

Gas Test Loop Hydraulic Testing Staff

2006-01-01

The Gas Test Loop (GTL) project is for the design of an adaptation to the Advanced Test Reactor (ATR) to create a fast-flux test space where fuels and materials for advanced reactor concepts can undergo irradiation testing. Incident to that design, it was found necessary to make use of special booster fuel to enhance the neutron flux in the reactor lobe in which the Gas Test Loop will be installed. Because the booster fuel is of a different composition and configuration from standard ATR fuel, it is necessary to qualify the booster fuel for use in the ATR. Part of that qualification is the determination that required thermal hydraulic criteria will be met under routine operation and under selected accident scenarios. The Hydraulic Testing task in the GTL project facilitates that determination by measuring flow coefficients (pressure drops) over various regions of the booster fuel over a range of primary coolant flow rates. A high-fidelity model of the NW lobe of the ATR with associated flow baffle, in-pile-tube, and below-core flow channels was designed, constructed and located in the Idaho State University Thermal Fluids Laboratory. A circulation loop was designed and constructed by the university to provide reactor-relevant water flow rates to the test system. Models of the four booster fuel elements required for GTL operation were fabricated from aluminum (no uranium or means of heating) and placed in the flow channel. One of these was instrumented with Pitot tubes to measure flow velocities in the channels between the three booster fuel plates and between the innermost and outermost plates and the side walls of the flow annulus. Flow coefficients in the range of 4 to 6.5 were determined from the measurements made for the upper and middle parts of the booster fuel elements. The flow coefficient for the lower end of the booster fuel and the sub-core flow channel was lower at 2.3

Gas Test Loop Booster Fuel Hydraulic Testing

Energy Technology Data Exchange (ETDEWEB)

Gas Test Loop Hydraulic Testing Staff

2006-09-01

The Gas Test Loop (GTL) project is for the design of an adaptation to the Advanced Test Reactor (ATR) to create a fast-flux test space where fuels and materials for advanced reactor concepts can undergo irradiation testing. Incident to that design, it was found necessary to make use of special booster fuel to enhance the neutron flux in the reactor lobe in which the Gas Test Loop will be installed. Because the booster fuel is of a different composition and configuration from standard ATR fuel, it is necessary to qualify the booster fuel for use in the ATR. Part of that qualification is the determination that required thermal hydraulic criteria will be met under routine operation and under selected accident scenarios. The Hydraulic Testing task in the GTL project facilitates that determination by measuring flow coefficients (pressure drops) over various regions of the booster fuel over a range of primary coolant flow rates. A high-fidelity model of the NW lobe of the ATR with associated flow baffle, in-pile-tube, and below-core flow channels was designed, constructed and located in the Idaho State University Thermal Fluids Laboratory. A circulation loop was designed and constructed by the university to provide reactor-relevant water flow rates to the test system. Models of the four booster fuel elements required for GTL operation were fabricated from aluminum (no uranium or means of heating) and placed in the flow channel. One of these was instrumented with Pitot tubes to measure flow velocities in the channels between the three booster fuel plates and between the innermost and outermost plates and the side walls of the flow annulus. Flow coefficients in the range of 4 to 6.5 were determined from the measurements made for the upper and middle parts of the booster fuel elements. The flow coefficient for the lower end of the booster fuel and the sub-core flow channel was lower at 2.3.

Rise-to-power test in High Temperature Engineering Test Reactor. Test progress and summary of test results up to 30 MW of reactor thermal power

International Nuclear Information System (INIS)

Nakagawa, Shigeaki; Fujimoto, Nozomu; Shimakawa, Satoshi

2002-08-01

The High Temperature Engineering Test Reactor (HTTR) is a graphite moderated and gas cooled reactor with the thermal power of 30 MW and the reactor outlet coolant temperature of 850degC/950degC. Rise-to-power test in the HTTR was performed from April 23rd to June 6th in 2000 as phase 1 test up to 10 MW in the rated operation mode, from January 29th to March 1st in 2001 as phase 2 test up to 20 MW in the rated operation mode and from April 14th to June 8th in 2001 as phase 3 test up to 20 MW in the high temperature test the mechanism of the reactor outlet coolant temperature becomes 850degC at 30 MW in the rated operation mode and 950degC in the high temperature test operation mode. Phase 4 rise-to-power test to achieve the thermal reactor power of 30 MW started on October 23rd in 2001. On December 7th in 2001 it was confirmed that the thermal reactor power and the reactor outlet coolant temperature reached to 30 MW and 850degC respectively in the single loaded operation mode in which only the primary pressurized water cooler is operating. Phase 4 test was performed until March 6th in 2002. JAERI (Japan Atomic Energy Research Institute) obtained the certificate of the pre-operation test from MEXT (Ministry of Education Culture Sports Science and Technology) after all the pre-operation tests by MEXT were passed successfully with the reactor transient test at an abnormal event as a final pre-operation test. From the test results of the rise-up-power test up to 30 MW in the rated operation mode, performance of the reactor and cooling system were confirmed, and it was also confirmed that an operation of reactor facility can be performed safely. Some problems to be solved were found through the tests. By solving them, the reactor operation with the reactor outlet coolant temperature of 950degC will be achievable. (author)

Experimental test results of multi-channel test rig of T1 test section, 5

International Nuclear Information System (INIS)

Hino, Ryutaro; Takase, Kazuyuki; Miyamoto, Yoshiaki

1990-09-01

Channel blockage test on a fuel column of the high temperature engineering test reactor (HTTR) has been performed under the helium gas atmosphere at a high temperature and a high pressure in order to obtain safety data on flow rate and temperature distributions in the fuel column with the multi-channel test rig of the fuel stack test section (T 1 ) in HENDEL. In the test, one of 12 fuel channels was blockaded to 90% of flow area at the channel inlet. Experimental results showed that the helium gas flow rate in the blockaded channel was 28%∼33% lower than the average flow rate for Reynolds number from 2300 to 14000 in isothermal flow. When simulated fuel rods were heated, the flow rate in the blockaded channel did not decrease down in comparison with the isothermal flow. This is due to that the heat generated in the fuel rods conducts to the other fuel channels in graphite fuel blocks, so that accelerated pressure losses in the fuel channels change with helium gas temperatures. (author)

CANFLEX fuel bundle cross-flow endurance test (test report)

International Nuclear Information System (INIS)

Hong, Sung Deok; Chung, C. H.; Chang, S. K.; Kim, B. D.

1997-04-01

As part of the normal refuelling sequence of CANDU nuclear reactor, both new and irradiated bundles can be parked in the cross-flow region of the liner tubes. This situation occurs normally for a few minutes. The fuel bundle which is subjected to the cross-flow should be capable of withstanding the consequences of cross flow for normal periods, and maintain its mechanical integrity. The cross-flow endurance test was conducted for CANFLEX bundle, latest developed nuclear fuel, at CANDU-Hot Test Loop. The test was carried out during 4 hours at the inlet cross-flow region. After the test, the bundle successfully met all acceptance criteria after the 4 hours cross-flow test. (author). 2 refs., 3 tabs

CANFLEX fuel bundle cross-flow endurance test (test report)

Energy Technology Data Exchange (ETDEWEB)

Hong, Sung Deok; Chung, C. H.; Chang, S. K.; Kim, B. D.

1997-04-01

As part of the normal refuelling sequence of CANDU nuclear reactor, both new and irradiated bundles can be parked in the cross-flow region of the liner tubes. This situation occurs normally for a few minutes. The fuel bundle which is subjected to the cross-flow should be capable of withstanding the consequences of cross flow for normal periods, and maintain its mechanical integrity. The cross-flow endurance test was conducted for CANFLEX bundle, latest developed nuclear fuel, at CANDU-Hot Test Loop. The test was carried out during 4 hours at the inlet cross-flow region. After the test, the bundle successfully met all acceptance criteria after the 4 hours cross-flow test. (author). 2 refs., 3 tabs.

Do Test Design and Uses Influence Test Preparation? Testing a Model of Washback with Structural Equation Modeling

Science.gov (United States)

Xie, Qin; Andrews, Stephen

2013-01-01

This study introduces Expectancy-value motivation theory to explain the paths of influences from perceptions of test design and uses to test preparation as a special case of washback on learning. Based on this theory, two conceptual models were proposed and tested via Structural Equation Modeling. Data collection involved over 870 test takers of…

Ultrasonic testing

Energy Technology Data Exchange (ETDEWEB)

Song, Sung Jin [Sungkwunkwan Univ., Seoul (Korea, Republic of); Jeong, Hyun Jo [Wonkwang Univ., Iksan (Korea, Republic of)

2004-02-15

For the proper performance of ultrasonic testing of steel welded joints, and anisotropic material it is necessary to have sound understanding on the underlying physics. To provide such an understanding, it is beneficial to have simulation tools for ultrasonic testing. In order to address such a need, we develop effective approaches to simulate angle beam ultrasonic testing with a personal computer. The simulation is performed using ultrasonic measurement models based on the computationally efficient multi-Gaussian beams. This reach will describe the developed ultrasonic testing models together with the experimental verification of their accuracy.

Myoglobin urine test

Science.gov (United States)

Urine myoglobin; Heart attack - myoglobin urine test; Myositis - myoglobin urine test; Rhabdomyolysis - myoglobin urine test ... The test involves only normal urination, which should cause no discomfort.

Ferritin Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... K. Brunner & Suddarth's Handbook of Laboratory and Diagnostic Tests. 2nd Ed, Kindle. Philadelphia: Wolters Kluwer Health, Lippincott Williams & Wilkins; c2014. Ferritin, Serum; 296 p. Lab Tests ...

CANFLEX fuel bundle cross-flow endurance test 2 (test procedure)

Energy Technology Data Exchange (ETDEWEB)

Hong, Sung Deok; Chung, C. H.; Chang, S. K. [Korea Atomic Energy Research Institute, Taejon (Korea)

1999-04-01

This report describes test procedure of cross-flow 2 test for CANFLEX fuel. In October 1996. a cross-flow test was successfully performed in the KAERI Hot Test Loop for four hours at a water flow rate of 31kg/s, temperature of 266 deg C and inlet pressure of 11MPa, but it is requested more extended time periods to determine a realistic operational margin for the CANFLEX bundle during abnormal refuelling operations. The test shall be conducted for twenty two hours under the reactor conditions. After an initial period of ten hours, the test shall be stopped at the intervals of four hours for bundle inspection and inspect the test bundle end-plate to end-cap welds for failure or crack propagation using liquid penetrant examination. 2 refs., 1 fig. (Author)

Dynamic testing of adhesive joints using a shock testing machine

NARCIS (Netherlands)

Aanhold, J.E. van; Weersink, A.F.J.; Ludolphy, J.W.L.

1998-01-01

A light-weight shock testing machine, designed for type approval testing of naval equipment up to 300 kg mass, has been modified into a dynamic tensile test rig. This enables to test structural details for high rate dynamic tensile loadings such as occur during underwater shock. The maximum capacity

ILAW Glass Testing for Disposal at IDF: Phase 1 Testing

Energy Technology Data Exchange (ETDEWEB)

Papathanassiu, Adonia [The Catholic Univ. of America, Washington, DC (United States). Virteous State Lab.; Muller, Isabelle S. [The Catholic Univ. of America, Washington, DC (United States). Virteous State Lab.; Brandys, Marek [The Catholic Univ. of America, Washington, DC (United States). Virteous State Lab.; Gilbo, Konstantin [The Catholic Univ. of America, Washington, DC (United States). Virteous State Lab.; Barkatt, Aaron [The Catholic Univ. of America, Washington, DC (United States). Virteous State Lab.; Joseph, Innocent [EnergySolutions Federal EPC, Inc., Columbia, MD (United States); The Catholic Univ. of America, Washington, DC (United States). Virteous State Lab.; Pegg, Ian L. [The Catholic Univ. of America, Washington, DC (United States). Virteous State Lab.; Brown, Elvie E. [Washington River Protection Solutions, LLC, Richland, WA (United States); Swanberg, David J. [Washington River Protection Solutions, LLC, Richland, WA (United States)

2011-04-11

This document reports the results of the testing of phase 1 ORP LAW (low activity waste) glasses, also identified as enhanced LAW glasses. Testing involved are SPFT (Single Pass Flow Through), VHT (Vapor Hydration Test), and PCT (Product Consistency Test), along with the analytical tests (XRD and SEM-EDS). This report contains the data of the high waste loading ORP LAW glasses that will be used for the performance assessment of the IDF (Integrated Disposal Facility).

ILAW Glass Testing for Disposal at IDF: Phase 1 Testing

International Nuclear Information System (INIS)

Papathanassiu, Adonia; Swanberg, David J.

2011-01-01

This document reports the results of the testing of phase 1 ORP LAW (low activity waste) glasses, also identified as enhanced LAW glasses. Testing involved are SPFT (Single Pass Flow Through), VHT (Vapor Hydration Test), and PCT (Product Consistency Test), along with the analytical tests (XRD and SEM-EDS). This report contains the data of the high waste loading ORP LAW glasses that will be used for the performance assessment of the IDF (Integrated Disposal Facility).

Simplified Freeman-Tukey test statistics for testing probabilities in ...

African Journals Online (AJOL)

This paper presents the simplified version of the Freeman-Tukey test statistic for testing hypothesis about multinomial probabilities in one, two and multidimensional contingency tables that does not require calculating the expected cell frequencies before test of significance. The simplified method established new criteria of ...

40 CFR 53.64 - Test procedure: Static fractionator test.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Test procedure: Static fractionator test. 53.64 Section 53.64 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Performance Characteristics of Class II Equivalent Methods for PM2.5 § 53.64 Test procedure: Static...

TOP 01-1-011B Vehicle Test Facilities at Aberdeen Test Center and Yuma Test Center

Science.gov (United States)

2017-12-12

Test Center 400 Colleran Road Aberdeen Proving Ground, MD 21005-5059 U.S. Army Yuma Proving Ground Yuma Test Center 301 C. Street Yuma, AZ...22 2.6 Munson Test Area (MTA) ..................................................... 24 2.7 Land Vehicle Maintenance Facility...127 3.6 Maintenance Facilities ........................................................... 143

Test plan for ISV laboratory-pyrolysis testing

Energy Technology Data Exchange (ETDEWEB)

McAtee, R.E.

1991-09-01

The objective of the laboratory-pyrolysis studies is to obtain information on the high temperature (< 1200{degree}C) degradation and alteration of organic chemicals and materials similar to those found in the Radioactive Waste Management Complex, Pit 9. This test plan describes experimental procedures, sampling and analysis strategy, sampling procedures, sample control, and document management. It addresses safety issues in the experimental apparatus and procedures, personal training, and hazardous waste disposal. Finally, it describes the data quality objectives using the EPA tiered approach to treatability studies to define where research/scoping tests fit into these studies and the EPA analytical levels required for the tests.

Test report for run-in acceptance testing of hydrogen mitigation test pump-2

International Nuclear Information System (INIS)

Brewer, A.K.; Kolowith, R.

1995-01-01

This document provides the results of the run-in test of the replacement mixer pump for the Tank 241-SY-101. The test was conducted at the 400 Area MASF facility between August 12 and September 29, 1994. The report includes findings, analysis, recommendations, and corrective actions taken

The testing effect for mediator final test cues and related final test cues in online and laboratory experiments.

Science.gov (United States)

Coppens, Leonora C; Verkoeijen, Peter P J L; Bouwmeester, Samantha; Rikers, Remy M J P

2016-05-31

The testing effect is the finding that information that is retrieved during learning is more often correctly retrieved on a final test than information that is restudied. According to the semantic mediator hypothesis the testing effect arises because retrieval practice of cue-target pairs (mother-child) activates semantically related mediators (father) more than restudying. Hence, the mediator-target (father-child) association should be stronger for retrieved than restudied pairs. Indeed, Carpenter (2011) found a larger testing effect when participants received mediators (father) than when they received target-related words (birth) as final test cues. The present study started as an attempt to test an alternative account of Carpenter's results. However, it turned into a series of conceptual (Experiment 1) and direct (Experiment 2 and 3) replications conducted with online samples. The results of these online replications were compared with those of similar existing laboratory experiments through small-scale meta-analyses. The results showed that (1) the magnitude of the raw mediator testing effect advantage is comparable for online and laboratory experiments, (2) in both online and laboratory experiments the magnitude of the raw mediator testing effect advantage is smaller than in Carpenter's original experiment, and (3) the testing effect for related cues varies considerably between online experiments. The variability in the testing effect for related cues in online experiments could point toward moderators of the related cue short-term testing effect. The raw mediator testing effect advantage is smaller than in Carpenter's original experiment.

Dtest Testing Software

Science.gov (United States)

Jain, Abhinandan; Cameron, Jonathan M.; Myint, Steven

2013-01-01

This software runs a suite of arbitrary software tests spanning various software languages and types of tests (unit level, system level, or file comparison tests). The dtest utility can be set to automate periodic testing of large suites of software, as well as running individual tests. It supports distributing multiple tests over multiple CPU cores, if available. The dtest tool is a utility program (written in Python) that scans through a directory (and its subdirectories) and finds all directories that match a certain pattern and then executes any tests in that directory as described in simple configuration files.

ITER test programme

International Nuclear Information System (INIS)

Abdou, M.; Baker, C.; Casini, G.

1991-01-01

ITER has been designed to operate in two phases. The first phase which lasts for 6 years, is devoted to machine checkout and physics testing. The second phase lasts for 8 years and is devoted primarily to technology testing. This report describes the technology test program development for ITER, the ancillary equipment outside the torus necessary to support the test modules, the international collaboration aspects of conducting the test program on ITER, the requirements on the machine major parameters and the R and D program required to develop the test modules for testing in ITER. 15 refs, figs and tabs

UAS-NAS Flight Test Series 3: Test Environment Report

Science.gov (United States)

Hoang, Ty; Murphy, Jim; Otto, Neil

2016-01-01

The desire and ability to fly Unmanned Aircraft Systems (UAS) in the National Airspace System (NAS) is of increasing urgency. The application of unmanned aircraft to perform national security, defense, scientific, and emergency management are driving the critical need for less restrictive access by UAS to the NAS. UAS represent a new capability that will provide a variety of services in the government (public) and commercial (civil) aviation sectors. The growth of this potential industry has not yet been realized due to the lack of a common understanding of what is required to safely operate UAS in the NAS. NASA's UAS Integration in the NAS Project is conducting research in the areas of Separation Assurance/Sense and Avoid Interoperability (SSI), Human Systems Integration (HSI), and Communications (Comm), and Certification to support reducing the barriers of UAS access to the NAS. This research is broken into two research themes namely, UAS Integration and Test Infrastructure. UAS Integration focuses on airspace integration procedures and performance standards to enable UAS integration in the air transportation system, covering Detect and Avoid (DAA) performance standards, command and control performance standards, and human systems integration. The focus of Test Infrastructure is to enable development and validation of airspace integration procedures and performance standards, including integrated test and evaluation. In support of the integrated test and evaluation efforts, the Project will develop an adaptable, scalable, and schedulable relevant test environment capable of evaluating concepts and technologies for unmanned aircraft systems to safely operate in the NAS. To accomplish this task, the Project is conducting a series of human-in-the-loop (HITL) and flight test activities that integrate key concepts, technologies and/or procedures in a relevant air traffic environment. Each of the integrated events will build on the technical achievements, fidelity, and

Retention of Prose Following Testing with Different Types of Tests.

Science.gov (United States)

Duchastel, Philippe C.

1981-01-01

Taking a test on a passage one has just studied is known to enhance later retention. This effect was influenced by the type of initial test used. It was evident in the case of the initial short-answer test, but not in the case of multiple choice and free recall tests. (Author/RD)

Project W-320, operational test procedure OTP-320-003 test report

International Nuclear Information System (INIS)

Bevins, R.R.

1998-01-01

This report documents and summarizes the results of OTP-320-003 Project W-320 Operational Testing of the WRSS Supernate Transfer System. Project W-320 Operational Test OTP-320-003 was performed to verify components of the Waste Retrieval Sluicing System (WRSS) supernate transfer system functioned as designed following construction completion and turnover to operations. All equipment operation was performed by Tank Farms Operations personnel following the operational test procedure and referenced operating procedures. Supernate Transfer line Flushing System Testing was completed over the course of approximately 4 weeks as tank farm conditions and configuration, equipment availability, and operations resources allowed. All testing was performed with the 702-AZ ventilation system and the 296-P-16 ventilation systems in operation. Test procedure OTP-320-003 required two revisions during testing to incorporate Procedure Changes Authorizations (PCAs) necessary to facilitate testing. Various sections of testing are documented on each procedure revision. The completed test procedure is included as Attachment A. Exception Reports generated during the course of testing are included as Attachment B

Test plan for Tank 241-AW-101 solubility screening tests

International Nuclear Information System (INIS)

Person, J.C.

1998-01-01

Tank 241-AW-101 (101-AW) has been identified as one of the early tanks to be for retrieved for low level waste pretreatment and immobilization and retrieval of the tank waste may require dilution. This test is to determine the effects of dilution on the mass of solids and their composition. This test plan gives test instructions, example data sheets, a waste compatibility review, and a waste stream fact sheet. This test Plan is similar to tests on tanks 241-AN-102 (Person 1998a) and 241-AN-107 (Person 1998 b). The 101-AW tests will be done with composites of liquid and solids from grab samples that were taken in 1998 (Benar 1998). Future revisions of the Tank Sampling and Analysis Plan (Benar 1998) may change the details of the work performed under this test plan

Lactose tolerance tests

Science.gov (United States)

Hydrogen breath test for lactose tolerance ... Two common methods include: Lactose tolerance blood test Hydrogen breath test The hydrogen breath test is the preferred method. It measures the amount of hydrogen ...

Anthrax blood test

Science.gov (United States)

Anthrax serology test; Antibody test for anthrax; Serologic test for B. anthracis ... This test may be performed when the health care provider suspects you have anthrax infection. The bacteria that cause ...

Ketones urine test

Science.gov (United States)

Ketone bodies - urine; Urine ketones; Ketoacidosis - urine ketones test; Diabetic ketoacidosis - urine ketones test ... Urine ketones are usually measured as a "spot test." This is available in a test kit that ...

Myoglobin blood test

Science.gov (United States)

Serum myoglobin; Heart attack - myoglobin blood test; Myositis - myoglobin blood test; Rhabdomyolysis - myoglobin blood test ... too high, it can damage the kidneys. This test is ordered when your health care provider suspects ...

A power recirculating test rig for ball screw endurance tests

Directory of Open Access Journals (Sweden)

Giberti Hermes

2016-01-01

Full Text Available A conceptual design of an innovative test rig for endurance tests of ball screws is presented in this paper. The test rig layout is based on the power recirculating principle and it also allows to overtake the main critical issues of the ball screw endurance tests. Among these there are the high power required to make the test, the lengthy duration of the same and the high loads between the screw and the frame that holds it. The article describes the test rig designed scheme, the kinematic expedients to be adopted in order to obtain the required performance and functionality and the sizing procedure to choose the actuation system.

Goodness of Fit Test and Test of Independence by Entropy

OpenAIRE

M. Sharifdoost; N. Nematollahi; E. Pasha

2009-01-01

To test whether a set of data has a specific distribution or not, we can use the goodness of fit test. This test can be done by one of Pearson X 2 -statistic or the likelihood ratio statistic G 2 , which are asymptotically equal, and also by using the Kolmogorov-Smirnov statistic in continuous distributions. In this paper, we introduce a new test statistic for goodness of fit test which is based on entropy distance, and which can be applied for large sample sizes...

Evaluation of field test equipment for halide and DOP testing

International Nuclear Information System (INIS)

Schreiber, K.L.; Kovach, J.L.

1975-01-01

The Nucon Testing Services Department, field testing at power reactor sites, has performed tests using R-11, R-12, and R-112 in conjunction with gas chromatographs and direct reading halide detectors. The field operational experience with these detector systems, thus sensitivity, precision, and manner of field calibration, are presented. Laboratory experiments regarding 3 H-tagged methyl iodide for in place leak testing of adsorber systems indicate a low hazard, high reliability process for leak testing in facilities where atmospheric cross contamination occurs. (U.S.)

Dispersant testing : a study on analytical test procedures

International Nuclear Information System (INIS)

Fingas, M.F.; Fieldhouse, B.; Wang, Z.; Environment Canada, Ottawa, ON

2004-01-01

Crude oil is a complex mixture of hydrocarbons, ranging from small, volatile compounds to very large, non-volatile compounds. Analysis of the dispersed oil is crucial. This paper described Environment Canada's ongoing studies on various traits of dispersants. In particular, it describes small studies related to dispersant effectiveness and methods to improve analytical procedures. The study also re-evaluated the analytical procedure for the Swirling Flask Test, which is now part of the ASTM standard procedure. There are new and improved methods for analyzing oil-in-water using gas chromatography (GC). The methods could be further enhanced by integrating the entire chromatogram rather than just peaks. This would result in a decrease in maximum variation from 5 per cent to about 2 per cent. For oil-dispersant studies, the surfactant-dispersed oil hydrocarbons consist of two parts: GC-resolved hydrocarbons and GC-unresolved hydrocarbons. This study also tested a second feature of the Swirling Flask Test in which the side spout was tested and compared with a new vessel with a septum port instead of a side spout. This decreased the variability as well as the energy and mixing in the vessel. Rather than being a variation of the Swirling Flask Test, it was suggested that a spoutless vessel might be considered as a completely separate test. 7 refs., 2 tabs., 4 figs

Test Review: Test of English as a Foreign Language[TM]--Internet-Based Test (TOEFL iBT[R])

Science.gov (United States)

Alderson, J. Charles

2009-01-01

In this article, the author reviews the TOEFL iBT which is the latest version of the TOEFL, whose history stretches back to 1961. The TOEFL iBT was introduced in the USA, Canada, France, Germany and Italy in late 2005. Currently the TOEFL test is offered in two testing formats: (1) Internet-based testing (iBT); and (2) paper-based testing (PBT).…

Catecholamine blood test

Science.gov (United States)

... page: //medlineplus.gov/ency/article/003561.htm Catecholamine blood test To use the sharing features on this page, ... measured with a urine test than with a blood test. How the Test is Performed A blood sample ...

Test facility TIMO for testing the ITER model cryopump

International Nuclear Information System (INIS)

Haas, H.; Day, C.; Mack, A.; Methe, S.; Boissin, J.C.; Schummer, P.; Murdoch, D.K.

2001-01-01

Within the framework of the European Fusion Technology Programme, FZK is involved in the research and development process for a vacuum pump system of a future fusion reactor. As a result of these activities, the concept and the necessary requirements for the primary vacuum system of the ITER fusion reactor were defined. Continuing that development process, FZK has been preparing the test facility TIMO (Test facility for ITER Model pump) since 1996. This test facility provides for testing a cryopump all needed infrastructure as for example a process gas supply including a metering system, a test vessel, the cryogenic supply for the different temperature levels and a gas analysing system. For manufacturing the ITER model pump an order was given to the company L' Air Liquide in the form of a NET contract. (author)

Test facility TIMO for testing the ITER model cryopump

International Nuclear Information System (INIS)

Haas, H.; Day, C.; Mack, A.; Methe, S.; Boissin, J.C.; Schummer, P.; Murdoch, D.K.

1999-01-01

Within the framework of the European Fusion Technology Programme, FZK is involved in the research and development process for a vacuum pump system of a future fusion reactor. As a result of these activities, the concept and the necessary requirements for the primary vacuum system of the ITER fusion reactor were defined. Continuing that development process, FZK has been preparing the test facility TIMO (Test facility for ITER Model pump) since 1996. This test facility provides for testing a cryopump all needed infrastructure as for example a process gas supply including a metering system, a test vessel, the cryogenic supply for the different temperature levels and a gas analysing system. For manufacturing the ITER model pump an order was given to the company L'Air Liquide in the form of a NET contract. (author)

Nondestructive Testing

Energy Technology Data Exchange (ETDEWEB)

Berger, Harold [Argonne National Laboratory

1969-01-01

A nondestructive test is an examination of an object in any manner which will not impair the future usefulness of the object. This booklet discusses a few basic methods of nondestructive testing, and some of their characteristics. In addition, it discusses possible future methods for nondestructive testing by taking a quick look at some of the methods now under study.

Science Library of Test Items. Volume Eleven. Mastery Testing Programme. [Mastery Tests Series 3.] Tests M27-M38.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As part of a series of tests to measure mastery of specific skills in the natural sciences, copies of tests 27 through 38 include: (27) reading a grid plan; (28) identifying common invertebrates; (29) characteristics of invertebrates; (30) identifying elements; (31) using scientific notation part I; (32) classifying minerals; (33) predicting the…

Ground test facility for nuclear testing of space reactor subsystems

International Nuclear Information System (INIS)

Quapp, W.J.; Watts, K.D.

1985-01-01

Two major reactor facilities at the INEL have been identified as easily adaptable for supporting the nuclear testing of the SP-100 reactor subsystem. They are the Engineering Test Reactor (ETR) and the Loss of Fluid Test Reactor (LOFT). In addition, there are machine shops, analytical laboratories, hot cells, and the supporting services (fire protection, safety, security, medical, waste management, etc.) necessary to conducting a nuclear test program. This paper presents the conceptual approach for modifying these reactor facilities for the ground engineering test facility for the SP-100 nuclear subsystem. 4 figs

Thyroid Function Tests

Science.gov (United States)

... Home » Thyroid Function Tests Leer en Español Thyroid Function Tests FUNCTION HOW DOES THE THYROID GLAND FUNCTION? ... Cancer Thyroid Nodules in Children and Adolescents Thyroid Function Tests Resources Thyroid Function Tests Brochure PDF En ...

Blood sugar test

Science.gov (United States)

... sugar; Blood sugar level; Fasting blood sugar; Glucose test; Diabetic screening - blood sugar test; Diabetes - blood sugar test ... The test may be done in the following ways: After you have not eaten anything for at least 8 ...

Blood Test: Bilirubin

Science.gov (United States)

... Videos for Educators Search English Español Blood Test: Bilirubin KidsHealth / For Parents / Blood Test: Bilirubin What's in ... liver or kidneys) is working. What Is a Bilirubin Test? A bilirubin test measures how much bilirubin ...

Amnesiacs might get the gist: reduced false recognition in amnesia may be the result of impaired item-specific memory.

Science.gov (United States)

Nissan, Jack; Abrahams, Sharon; Sala, Sergio Della

2013-01-01

It is a common finding in tests of false recognition that amnesic patients recognize fewer related lures than healthy controls, and this has led to assumptions that gist memory is damaged in these patients (Schacter, Verfaellie, & Anes, 1997, Neuropsychology, 11; Schacter, Verfaellie, Anes, & Racine, 1998, Journal of Cognitive Neuroscience, 10; Schacter, Verfaellie, & Pradere, 1996, Journal of Memory and Language, 35). However, clinical observations find that amnesic patients typically hold meaningful conversations and make relevant remarks, and there is some experimental evidence highlighting preserved immediate recall of prose (Baddeley & Wilson, 2002, Neuropsychologia, 40; Gooding, Isaac, & Mayes, 2005, Neuropsychologia, 43; Rosenbaum, Gilboa, Levine, Winocur, & Moscovitch, 2009, Neuropsychologia, 47), which suggests that amnesiacs can get the gist. The present experiment used false recognition paradigms to assess whether the reduced rate of false recognition found in amnesic patients may be a consequence of their impaired item-specific memory. It examined the effect of increasing the item-specific memory of amnesic patient DA by bringing her to criterion on relevant study-lists and compared her performance on a false recognition paradigm with a group of 32 healthy young adults. Results indicated that when DA's item-specific memory was increased she was more able to gist and her performance was no different to the healthy young adults. Previous assumptions that gist memory is necessarily damaged in amnesia might therefore be revisited, since the reduced rate of false recognition could be caused by impaired item-specific memory. The experiment also highlights a positive relationship between item-specific and gist memory which has not previously been accounted for in false-recognition experiments.

Short-term memory in Down syndrome: applying the working memory model.

Science.gov (United States)

Jarrold, C; Baddeley, A D

2001-10-01

This paper is divided into three sections. The first reviews the evidence for a verbal short-term memory deficit in Down syndrome. Existing research suggests that short-term memory for verbal information tends to be impaired in Down syndrome, in contrast to short-term memory for visual and spatial material. In addition, problems of hearing or speech do not appear to be a major cause of difficulties on tests of verbal short-term memory. This suggests that Down syndrome is associated with a specific memory problem, which we link to a potential deficit in the functioning of the 'phonological loop' of Baddeley's (1986) model of working memory. The second section considers the implications of a phonological loop problem. Because a reasonable amount is known about the normal functioning of the phonological loop, and of its role in language acquisition in typical development, we can make firm predictions as to the likely nature of the short-term memory problem in Down syndrome, and its consequences for language learning. However, we note that the existing evidence from studies with individuals with Down syndrome does not fit well with these predictions. This leads to the third section of the paper, in which we consider key questions to be addressed in future research. We suggest that there are two questions to be answered, which follow directly from the contradictory results outlined in the previous section. These are 'What is the precise nature of the verbal short-term memory deficit in Down syndrome', and 'What are the consequences of this deficit for learning'. We discuss ways in which these questions might be addressed in future work.

Test Plan: WIPP bin-scale CH TRU waste tests

International Nuclear Information System (INIS)

Molecke, M.A.

1990-08-01

This WIPP Bin-Scale CH TRU Waste Test program described herein will provide relevant composition and kinetic rate data on gas generation and consumption resulting from TRU waste degradation, as impacted by synergistic interactions due to multiple degradation modes, waste form preparation, long-term repository environmental effects, engineered barrier materials, and, possibly, engineered modifications to be developed. Similar data on waste-brine leachate compositions and potentially hazardous volatile organic compounds released by the wastes will also be provided. The quantitative data output from these tests and associated technical expertise are required by the WIPP Performance Assessment (PA) program studies, and for the scientific benefit of the overall WIPP project. This Test Plan describes the necessary scientific and technical aspects, justifications, and rational for successfully initiating and conducting the WIPP Bin-Scale CH TRU Waste Test program. This Test Plan is the controlling scientific design definition and overall requirements document for this WIPP in situ test, as defined by Sandia National Laboratories (SNL), scientific advisor to the US Department of Energy, WIPP Project Office (DOE/WPO). 55 refs., 16 figs., 19 tabs

Bacteria Culture Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/bacteriaculturetest.html Bacteria Culture Test To use the sharing features on this page, please enable JavaScript. What is a Bacteria Culture Test? Bacteria are a large group of ...

Flu (Influenza) Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/fluinfluenzatest.html Flu (Influenza) Test To use the sharing features on this page, please enable JavaScript. What is a Flu (Influenza) Test? Influenza, known as the flu , is ...

Allergy Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/allergybloodtest.html Allergy Blood Test To use the sharing features on this page, please enable JavaScript. What is an Allergy Blood Test? Allergies are a common and chronic ...

Double-shell tank integrity assessments ultrasonic test equipment performance test

Energy Technology Data Exchange (ETDEWEB)

Pfluger, D.C.

1996-09-26

A double-shell tank (DST) inspection (DSTI) system was performance tested over three months until August 1995 at Pittsburgh, Pennsylvania, completing a contract initiated in February 1993 to design, fabricate, and test an ultrasonic inspection system intended to provide ultrasonic test (UT) and visual data to determine the integrity of 28 DSTs at Hanford. The DSTs are approximately one-million-gallon underground radioactive-waste storage tanks. The test was performed in accordance with a procedure (Jensen 1995) that included requirements described in the contract specification (Pfluger 1995). This report documents the results of tests conducted to evaluate the performance of the DSTI system against the requirements of the contract specification. The test of the DSTI system also reflects the performance of qualified personnel and operating procedures.

Science Library of Test Items. Volume Ten. Mastery Testing Programme. [Mastery Tests Series 2.] Tests M14-M26.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As part of a series of tests to measure mastery of specific skills in the natural sciences, copies of tests 14 through 26 include: (14) calculating an average; (15) identifying parts of the scientific method; (16) reading a geological map; (17) identifying elements, mixtures and compounds; (18) using Ohm's law in calculation; (19) interpreting…

Alternative filtration testing program: Pre-evaluation of test results

International Nuclear Information System (INIS)

Georgeton, G.K.; Poirier, M.R.

1990-01-01

Based on results of testing eight solids removal technologies and one pretreatment option, it is recommended that a centrifugal ultrafilter and polymeric ultrafilter undergo further testing as possible alternatives to the Norton Ceramic filters. Deep bed filtration should be considered as a third alternative, if a backwashable cartridge filter is shown to be inefficient in separate testing

Methodology for testing metal detectors using variables test data

Energy Technology Data Exchange (ETDEWEB)

Spencer, D.D.; Murray, D.W.

1993-08-01

By extracting and analyzing measurement (variables) data from portal metal detectors whenever possible instead of the more typical ``alarm``/``no-alarm`` (attributes or binomial) data, we can be more informed about metal detector health with fewer tests. This testing methodology discussed in this report is an alternative to the typical binomial testing and in many ways is far superior.

Alternative filtration testing program: Pre-evaluation of test results

Energy Technology Data Exchange (ETDEWEB)

Georgeton, G.K.; Poirier, M.R.

1990-09-28

Based on results of testing eight solids removal technologies and one pretreatment option, it is recommended that a centrifugal ultrafilter and polymeric ultrafilter undergo further testing as possible alternatives to the Norton Ceramic filters. Deep bed filtration should be considered as a third alternative, if a backwashable cartridge filter is shown to be inefficient in separate testing.

Advanced test reactor testing experience-past, present and future

International Nuclear Information System (INIS)

Marshall, Frances M.

2006-01-01

The Advanced Test Reactor (ATR), at the Idaho National Laboratory (INL), is one of the world's premier test reactors for providing the capability for studying the effects of intense neutron and gamma radiation on reactor materials and fuels. The physical configuration of the ATR, a 4-leaf clover shape, allows the reactor to be operated at different power levels in the corner 'lobes' to allow for different testing conditions for multiple simultaneous experiments. The combination of high flux (maximum thermal neutron fluxes of 1E15 neutrons per square centimeter per second and maximum fast [E>1.0 MeV] neutron fluxes of 5E14 neutrons per square centimeter per second) and large test volumes (up to 122 cm long and 12.7 cm diameter) provide unique testing opportunities. The current experiments in the ATR are for a variety of test sponsors - US government, foreign governments, private researchers, and commercial companies needing neutron irradiation services. There are three basic types of test configurations in the ATR. The simplest configuration is the sealed static capsule, which places the capsule in direct contact with the primary coolant. The next level of experiment complexity is an instrumented lead experiment, which allows for active control of experiment conditions during the irradiation. The most complex experiment is the pressurized water loop, in which the test sample can be subjected to the exact environment of a pressurized water reactor. For future research, some ATR modifications and enhancements are currently planned. This paper provides more details on some of the ATR capabilities, key design features, experiments, and future plans

46 CFR 57.06-2 - Production test plate interval of testing.

Science.gov (United States)

2010-10-01

... WELDING AND BRAZING Production Tests § 57.06-2 Production test plate interval of testing. (a) At least one... 46 Shipping 2 2010-10-01 2010-10-01 false Production test plate interval of testing. 57.06-2... follows: (1) When the extent of welding on a single vessel exceeds 50 lineal feet of either or both...

The Effect of Mini and Midi Anchor Tests on Test Equating

Science.gov (United States)

Arikan, Çigdem Akin

2018-01-01

The main purpose of this study is to compare the test forms to the midi anchor test and the mini anchor test performance based on item response theory. The research was conducted with using simulated data which were generated based on Rasch model. In order to equate two test forms the anchor item nonequivalent groups (internal anchor test) was…

Modification of the Rappaport rapid test in large-scale testing for syphilis. Evaluation of the rapid plate and rapid card tests.

Science.gov (United States)

Ghinsberg, R; Meir, E; Blumstein, G; Kafeman, R

1975-11-01

The Rappaport rapid (RR) plate and card tests were developed as modifications of the RR tube test to permit rapid and inexpensive screening of large numbers of subjects for the diagnosis of syphilis. More than 2,000 sera were examined in parallel by the Venereal Disease Research Laboratory (VDRL) slide test, the rapid plasma reagin (RPR) card test and the RR plate and card tests. There was complete agreement between the RR plate and card tests and the VDRL slide and RPR card tests in 96.6% of sera. In a selected group of 1,530 sera examined, in addition, by the fluorescent treponemal antibody absorption (FTA-ABS) test, there was agreement between the RR plate and card tests and the FTA-ABS test in 74.3% of sera and between the VDRL and RPR tests and the FTA-ABS test in 73.7% of sera. The RR plate test was found to be sufficiently sensitive and specific for the diagnosis of syphilis, although the VDRL slide test is perhaps more sensitive in primary and late latent syphilis. Since the antigen used in the RR tests is colored and stable and the sera do not require inactivation before the test, the tests are easier to perform than the VDRL slide test: the RR plate and card tests could therefore replace the VDRL test as a screening test, with hardly any loss of accuracy.

Validation of an Academic Listening Test: Effects of "Breakdown" Tests and Test Takers' Cognitive Awareness of Listening Processes

Science.gov (United States)

Chi, Youngshin

2011-01-01

This study investigated the breakdown effect of a listening comprehension test, whether test takers are affected in comprehending lectures by impediments, and collected test takers' cognitive awareness on test tasks which contain listening breakdown factors how they perceived these impediments. In this context of the study, a "Breakdown" is a test…

Testing the Turing Test — do Men Pass It?

Science.gov (United States)

Adam, Ruth; Hershberg, Uri; Schul, Yaacov; Solomon, Sorin

We are fascinated by the idea of giving life to the inanimate. The fields of Artificial Life and Artificial Intelligence (AI) attempt to use a scientific approach to pursue this desire. The first steps on this approach hark back to Turing and his suggestion of an imitation game as an alternative answer to the question "can machines think?".1 To test his hypothesis, Turing formulated the Turing test1 to detect human behavior in computers. But how do humans pass such a test? What would you say if you would learn that they do not pass it well? What would it mean for our understanding of human behavior? What would it mean for our design of tests of the success of artificial life? We report below an experiment in which men consistently failed the Turing test.

Cable aging tests

International Nuclear Information System (INIS)

Hubbard, G.

1993-01-01

This paper describes the results from aging, condition monitoring, and loss-of-coolant accident (LOCA) testing of class 1E electrical cables, per NUREG/CR-5772. This test was designed to test the performance of cables which had been aged with simultaneous radiation and thermal exposure. The tested cables included crosslinked polyolefin cables, ethylene propylene rubber cables, and miscellaneous cable types. Cables were exposed to 20, 40, and 60 years equivalent aging, and then exposed to LOCA tests at the end of their qualified life to determine the minimum insulation thickness needed for survival of the test. Failures were found in a large number of the tested cables. As a result the NRC has sent information notices to the industry regarding potential insulation problems. The results have raised the question of whether the artificial aging methods provide adequate testing methods. As a result of this testing the NRC is reviewing the artificial aging procedures, the adequacy of environmental qualification requirements for cable safety, and reexamining data from condition monitoring of installed cables

Dynamic Response Testing in an Electrically Heated Reactor Test Facility

Science.gov (United States)

Bragg-Sitton, Shannon M.; Morton, T. J.

2006-01-01

Non-nuclear testing can be a valuable tool in development of a space nuclear power or propulsion system. In a non-nuclear test bed, electric heaters are used to simulate the heat from nuclear fuel. Standard testing allows one to fully assess thermal, heat transfer, and stress related attributes of a given system, but fails to demonstrate the dynamic response that would be present in an integrated, fueled reactor system. The integration of thermal hydraulic hardware tests with simulated neutronic response provides a bridge between electrically heated testing and full nuclear testing. By implementing a neutronic response model to simulate the dynamic response that would be expected in a fueled reactor system, one can better understand system integration issues, characterize integrated system response times and response characteristics, and assess potential design improvements at a relatively small fiscal investment. Initial system dynamic response testing was demonstrated on the integrated SAFE-100a heat pipe cooled, electrically heated reactor and heat exchanger hardware, utilizing a one-group solution to the point kinetics equations to simulate the expected neutronic response of the system (Bragg-Sitton, 2005). The current paper applies the same testing methodology to a direct drive gas cooled reactor system, demonstrating the applicability of the testing methodology to any reactor type and demonstrating the variation in system response characteristics in different reactor concepts. In each testing application, core power transients were controlled by a point kinetics model with reactivity feedback based on core average temperature; the neutron generation time and the temperature feedback coefficient are provided as model inputs. Although both system designs utilize a fast spectrum reactor, the method of cooling the reactor differs significantly, leading to a variable system response that can be demonstrated and assessed in a non-nuclear test facility.

Material testing facilities and programs for plasma-facing component testing

Science.gov (United States)

Linsmeier, Ch.; Unterberg, B.; Coenen, J. W.; Doerner, R. P.; Greuner, H.; Kreter, A.; Linke, J.; Maier, H.

2017-09-01

Component development for operation in a large-scale fusion device requires thorough testing and qualification for the intended operational conditions. In particular environments are necessary which are comparable to the real operation conditions, allowing at the same time for in situ/in vacuo diagnostics and flexible operation, even beyond design limits during the testing. Various electron and neutral particle devices provide the capabilities for high heat load tests, suited for material samples and components from lab-scale dimensions up to full-size parts, containing toxic materials like beryllium, and being activated by neutron irradiation. To simulate the conditions specific to a fusion plasma both at the first wall and in the divertor of fusion devices, linear plasma devices allow for a test of erosion and hydrogen isotope recycling behavior under well-defined and controlled conditions. Finally, the complex conditions in a fusion device (including the effects caused by magnetic fields) are exploited for component and material tests by exposing test mock-ups or material samples to a fusion plasma by manipulator systems. They allow for easy exchange of test pieces in a tokamak or stellarator device, without opening the vessel. Such a chain of test devices and qualification procedures is required for the development of plasma-facing components which then can be successfully operated in future fusion power devices. The various available as well as newly planned devices and test stands, together with their specific capabilities, are presented in this manuscript. Results from experimental programs on test facilities illustrate their significance for the qualification of plasma-facing materials and components. An extended set of references provides access to the current status of material and component testing capabilities in the international fusion programs.

Science Library of Test Items. Volume Thirteen. Mastery Testing Program. [Mastery Tests Series 5.] Tests M51-M65.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As part of a series of tests to measure mastery of specific skills in the natural sciences, copies of tests 51 through 65 include: (51) interpreting atomic and mass numbers; (52) extrapolating from a geological map; (53) matching geological sections and maps; (54) identifying parts of the human eye; (55) identifying the functions of parts of a…

Test Cost and Test Accuracy in Clinical Laboratories in Kampala, Uganda.

Science.gov (United States)

Amukele, Timothy K; Jones, Robert; Elbireer, Ali

2018-04-25

To assess the accuracy and costs of laboratory tests in Kampala, Uganda. A random selection of 78 laboratories tested external quality assurance samples at market rates. There were 40 moderate- to high-complexity and 38 low-complexity laboratories. Four percent (3/78) of these laboratories were accredited and 94% (73/78) were private. The 40 moderate- to high-complexity laboratories performed malaria blood smear, urine human chorionic gonadotropin (hCG), human immunodeficiency virus (HIV), syphilis, glucose, and three-panel tests: CBC, liver function tests, and kidney function tests. The 38 low-complexity laboratories performed malaria blood smear, urine hCG, and syphilis testing only. Hematology, HIV, syphilis, and malarial proficiency testing samples were prepared by accredited laboratories in Kampala. All other samples were provided by the Royal College of Pathologists of Australia. 77.1% of all results were accurate (met target values). It varied widely by laboratory (50%-100%), test identity (malaria blood smear, 96%; serum urea nitrogen, 38%), and test type (quantitative: 66% [31%-89%], qualitative: 91% [68%-97%]). Test prices varied by up to 3,600%, and there was no correlation between test cost and accuracy (r2 = 0.02). There were large differences in accuracy and price across laboratories in Kampala. Price was not associated with quality.

Testing Aircraft Instruments.

Science.gov (United States)

1981-02-11

1. Have test data been collected, recorded, and presented in accordance with this TOP? Yes No Comment : 2. Were the facilities, test equipment...instrumentation, and support accommodations adequate to accomplish the test objectives? Yes No Comment : 3. Have all data collected been reviewed for...correctness and completeness? Yes No Comment : 4. Were the test results compromised in any way due to insufficient test planning? Yes No Comment : 5. Were the

Pragmatic Software Testing Becoming an Effective and Efficient Test Professional

CERN Document Server

Black, Rex

2011-01-01

A hands-on guide to testing techniques that deliver reliable software and systemsTesting even a simple system can quickly turn into a potentially infinite task. Faced with tight costs and schedules, testers need to have a toolkit of practical techniques combined with hands-on experience and the right strategies in order to complete a successful project. World-renowned testing expert Rex Black provides you with the proven methods and concepts that test professionals must know. He presents you with the fundamental techniques for testing and clearly shows you how to select and apply successful st

CANFLEX fuel bundle cross-flow endurance test 2 (Test report)

Energy Technology Data Exchange (ETDEWEB)

Hong, Sung Deok; Chung, C. H.; Chang, S. K.; Kim, B. D. [Korea Atomic Energy Research Institute, Taejeon (Korea)

2000-02-01

This report describes cross-flow endurance test 2 that was conducted at the CANDU-Hot Test Loop. The test was completed on March 30, 1999 using a new CANFLEX bundle, built by KAERI. It was carried out for a total of 22 hours. After an initial period of ten hours, the test was stopped at the intervals of four hours for bundle inspection and inter-element gap measurement[7]. The test bundle end-plate to end-cap welds were inspected carefully for failure or crack propagation using liquid penetrant examination especially at the heat-affected zones. 12 refs., 4 figs., 10 tabs. (Author)

Maximal cardiorespiratory fitness testing in individuals with chronic stroke with cognitive impairment: practice test effects and test-retest reliability.

Science.gov (United States)

Olivier, Charles; Doré, Jean; Blanchet, Sophie; Brooks, Dina; Richards, Carol L; Martel, Guy; Robitaille, Nancy-Michelle; Maltais, Désirée B

2013-11-01

To evaluate, for individuals with chronic stroke with cognitive impairment, (1) the effects of a practice test on peak cardiorespiratory fitness test results; (2) cardiorespiratory fitness test-retest reliability; and (3) the relationship between individual practice test effects and cognitive impairment. Cross-sectional. Rehabilitation center. A convenience sample of 21 persons (men [n=12] and women [n=9]; age range, 48-81y; 44.9±36.2mo poststroke) with cognitive impairments who had sufficient lower limb function to perform the test. Not applicable. Peak oxygen consumption (Vo(2)peak, ml·kg(-1)·min(-1)). Test-retest reliability of Vo(2)peak was excellent (intraclass correlation coefficient model 2,1 [ICC2,1]=.94; 95% confidence interval [CI], .86-.98). A paired t test showed that there was no significant difference for the group for Vo(2)peak obtained from 2 symptom-limited cardiorespiratory fitness tests performed 1 week apart on a semirecumbent cycle ergometer (test 2-test 1 difference, -.32ml·kg(-1)·min(-1); 95% CI, -.69 to 1.33ml·kg(-1)·min(-1); P=.512). Individual test-retest differences in Vo(2)peak were, however, positively related to general cognitive function as measured by the Mini-Mental State Examination (ρ=.485; Preliably measured in this group without a practice test. General cognitive function, however, may influence the effect of a practice test in that those with lower general cognitive function appear to respond differently to a practice test than those with higher cognitive function. Copyright © 2013 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Startup testing of Romania dual-core test reactor

International Nuclear Information System (INIS)

Whittemore, W.L.

1980-01-01

Late in 1979 both the Annular Core Pulsed Reactor (ACPR) and the 14-MW steady-state reactor (SSR) were loaded to critical. The fuel loading in both was then carried to completion and low-power testing was conducted. Early in 1980 both reactors successfully underwent high-power testing. The ACPR was operated for several hours at 500 kW and underwent pulse tests culminating in pulses with reactivity insertions of $4.60, peak power levels of about 20,000 MW, energy releases of 100 MW-sec, and peak measured fuel temperatures of 830 deg. C. The SSR was operated in several modes, both with natural convection and forced cooling with one or more pumps. The reactor successfully completed a 120-hr full-power test. Subsequent fuel element inspections confirmed that the fuel has performed without fuel damage or distortion. (author)

Prostate-Specific Antigen (PSA) Test: MedlinePlus Lab Test Information

Science.gov (United States)

... medlineplus.gov/labtests/prostatespecificantigenpsatest.html Prostate-Specific Antigen (PSA) Test To use the sharing features on this ... enable JavaScript. What is a prostate-specific antigen (PSA) test? A prostate-specific antigen (PSA) test measures ...

Field testing at the Climax Stock on the Nevada Test Site: spent fuel test and radionuclide migration experiments

International Nuclear Information System (INIS)

Ballou, L.B.; Isherwood, D.J.; Patrick, W.C.

1982-01-01

Two field tests in the Climax Stock are being conducted. The Climax Stock, a granitic instrusive, has been administratively excluded from consideration as a full-scale repository site. However, it provides a readily available facility for field testing with high-level radioactive materials at a depth (420 m) approaching that of a repository. The major test activity in the 1980 fiscal year has been initiation of the Spent Fuel Test-Climax (SFT-C). This test, which was authorized in June 1978, is designed to evaluate the generic feasibility of geologic storage and retrievability of commercial power reactor spent fuel assemblies in a granitic medium. In addition, the test is configured and instrumented to provide thermal and thermomechanical response data that will be relevant to the design of a repository in hard crystalline rock. The other field activity in the Climax Stock is a radionuclide migration test. It combines a series of field and laboratory migration experiments with the use of existing hydrologic models for pretest predictions and data interpretation. Goals of this project are to develop: (1) field measurement techniques for radionuclide migration studies in a hydrologic regime where the controlling mechanism is fracture permeability; (2) field test data on radionuclide migration; and (3) a comparison of laboratory- and field-measured retardation factors. This radionuclide migration test, which was authorized in the middle of the 1980 fiscal year, is in the preliminary design phase. The detailed program plan was prepared and subjected to formal peer review in August. In September/October researchers conducted preliminary flow tests with water in selected near-vertical fractures intersected by small horizontal boreholes. These tests were needed to establish the range of pressures, flow rates, and other operating parameters to be used in conducting the nuclide migration tests. 21 references, 14 figures, 1 table

Fracture evaluation tests

International Nuclear Information System (INIS)

Robinson, G.C.

1991-01-01

In this report period, efforts have concentrated on defining the requirements for shallow-flaw beam testing. Analyses have been made to envelope the significant parameters for both deep- and shallow-flaw beams for three-point loading; that is, load to initiation of a frangible flaw, load to plastic collapse, LLD, and CMOD. An assessment was made of facilities capable of performing the tests identified by the parametric analyses discussed above. Two testing machines were identified for performing the scoped test series, the first a 550-kip Instron machine assigned to the Pressure Vessel Technology Section located in Building 9204-1 at the Y-12 Plant and the second a 220-kip MTS machine assigned to a mechanical testing group located at the K-25 Site. An existing bend test fixture previously used in the HSST clad plate test series is being modified for use in testing beams under other sponsorship but will be available for shared usage with the HSST shallow-flaw beam testing activities. To prevent the shared usage from having an adverse impact on the logistics of the HSST Program, the decision was made to procure a bend test fixture tailored specifically to serve the shallow flaw beam test series. A specification was prepared and procurement initiated. A survey is in progress for determining sources and costs of displacement-measuring instrumentation from both foreign and domestic sources. It appears that existing direct current displacement transducers available to the HSST Program may be adequate for the LLD measurements. These devices will be employed in the shakedown tests that are planned. A safety and environmental survey assessment for the beam testing conforming to the revised DOE rules has been prepared and approved

Gallium-cladding compatibility testing plan. Phases 1 and 2: Test plan for gallium corrosion tests. Revision 2

International Nuclear Information System (INIS)

Wilson, D.F.; Morris, R.N.

1998-05-01

This test plan is a Level-2 document as defined in the Fissile Materials Disposition Program Light-Water-Reactor Mixed-Oxide Fuel Irradiation Test Project Plan. The plan summarizes and updates the projected Phases 1 and 2 Gallium-Cladding compatibility corrosion testing and the following post-test examination. This work will characterize the reactions and changes, if any, in mechanical properties that occur between Zircaloy clad and gallium or gallium oxide in the temperature range 30--700 C

Refactoring test code

NARCIS (Netherlands)

A. van Deursen (Arie); L.M.F. Moonen (Leon); A. van den Bergh; G. Kok

2001-01-01

textabstractTwo key aspects of extreme programming (XP) are unit testing and merciless refactoring. Given the fact that the ideal test code / production code ratio approaches 1:1, it is not surprising that unit tests are being refactored. We found that refactoring test code is different from

More Than Just Accuracy: A Novel Method to Incorporate Multiple Test Attributes in Evaluating Diagnostic Tests Including Point of Care Tests.

Science.gov (United States)

Thompson, Matthew; Weigl, Bernhard; Fitzpatrick, Annette; Ide, Nicole

2016-01-01

Current frameworks for evaluating diagnostic tests are constrained by a focus on diagnostic accuracy, and assume that all aspects of the testing process and test attributes are discrete and equally important. Determining the balance between the benefits and harms associated with new or existing tests has been overlooked. Yet, this is critically important information for stakeholders involved in developing, testing, and implementing tests. This is particularly important for point of care tests (POCTs) where tradeoffs exist between numerous aspects of the testing process and test attributes. We developed a new model that multiple stakeholders (e.g., clinicians, patients, researchers, test developers, industry, regulators, and health care funders) can use to visualize the multiple attributes of tests, the interactions that occur between these attributes, and their impacts on health outcomes. We use multiple examples to illustrate interactions between test attributes (test availability, test experience, and test results) and outcomes, including several POCTs. The model could be used to prioritize research and development efforts, and inform regulatory submissions for new diagnostics. It could potentially provide a way to incorporate the relative weights that various subgroups or clinical settings might place on different test attributes. Our model provides a novel way that multiple stakeholders can use to visualize test attributes, their interactions, and impacts on individual and population outcomes. We anticipate that this will facilitate more informed decision making around diagnostic tests.

IFE chamber technology testing program in NIF and chamber development test plan

International Nuclear Information System (INIS)

Abdou, M.A.

1995-01-01

Issues concerning chamber technology testing program in NIF involving: criteria for evaluation/prioritization of experiments, engineering scaling requirements for test article design and material selection and R and D plan prior to NIF testing were addressed in this paper. In order to maximize the benefits of testing program in NIF, the testing in NIF should provide the experimental data relevant to DEMO design choice or to DEMO design predictive capability by utilizing engineering scaling test article designs. Test plans were developed for 2 promising chamber design concepts. Early testing in non-fusion/non-ignition prior to testing in ignition facility serves a critical role in chamber R and D test plans in order to reduce the risks and costs of the more complex experiments in NIF

Effect of Test-Expectancy and Word Bank Availability on Test Performance

Science.gov (United States)

Glass, Laura A.; Clause, Christopher B.; Kreiner, David S.

2007-01-01

We examined test-expectancy as it applies to fill-in-the-blank tests. We randomly assigned 60 college students to take a fill-in-the-blank vocabulary test in one of three conditions. Two groups took the test with a word bank available; we told one group but not the other that they would have a word bank. The third group took the test with no word…

Grimsel Test Site: heat test, final report

International Nuclear Information System (INIS)

Schneefuss, J.; Glaess, F.; Gommlich, G.; Schmidt, M.

1989-05-01

The Swiss concept for the storage of radioactive waste consists in placing it in compact, dense rock formations. An experiment 'Heat Test' carried out by the 'Gesellschaft fuer Strahlen- und Umweltforschung' in Nagra's Grimsel rock laboratory simulated the heat production of stored radioactive waste. The aim was to evaluate processes for the demonstration of the suitability of a final repository for heat-producing radioactive waste in cristalline rock, to investigate the thermic, mechanic and hydraulic reactions to an artificial heat source, and to develop corresponding calculating models. The duration of the tests was about 3 years. In this report the measured thermic, mechanic and hydraulic reactions are documented and discussed in detail. A simple, rotation symmetrical FEM-model was used for the preparatory and experiment-accompanying modelling of the thermomechanical conditions in the heat test. The test showed that suitable measuring methods for the surveillance of the geomechanics of a final repository are available and that the reactions of the crystalline host rock to the heat source remain locally limited and can be modelled with relatively small effort. 29 refs., 33 figs., 10 tabs

Stability of fragrance patch test preparations applied in test chambers.

Science.gov (United States)

Mowitz, M; Zimerson, E; Svedman, C; Bruze, M

2012-10-01

Petrolatum patch test preparations are for practical reasons often applied in test chambers in advance, several hours or even days before the patient is tested. As many fragrance compounds are volatile it may be suspected that petrolatum preparations applied in test chambers are not stable over time. To investigate the stability of petrolatum preparations of the seven chemically defined components in the fragrance mix (FM I) when stored in test chambers. Samples of petrolatum preparations applied in test chambers stored at room temperature and in a refrigerator for between 4 and 144 h were analysed using liquid chromatographic methods. The concentration decreased by ≥ 20% within 8 h in four of seven preparations stored in Finn chambers at room temperature. When stored in a refrigerator only the preparation of cinnamal had decreased by ≥ 20% within 24 h. The stability of preparations of cinnamal stored in IQ chambers with a plastic cover was slightly better, but like the preparations applied in Finn chambers, the concentration decreased by ≥ 20% within 4 h at room temperature and within 24 h in a refrigerator. Cinnamal and cinnamyl alcohol were found to be more stable when analysed as ingredients in FM I compared with when analysed in individual preparations. Within a couple of hours several fragrance allergens evaporate from test chambers to an extent that may affect the outcome of the patch test. Application to the test chambers should be performed as close to the patch test occasion as possible and storage in a refrigerator is recommended. © 2012 The Authors. BJD © 2012 British Association of Dermatologists.

Fire testing and analysis of TRUPACT-I Thermal Test Article

International Nuclear Information System (INIS)

Romesberg, L.E.; Longenbaugh, R.S.; Joseph, B.J.

1989-02-01

This report documents the fabrication and thermal test of a full-scale prototype of the revised TRUPACT-I design. The fire test demonstrated that the response of the Test Article to a jet-fueled pool fire, subsequent to the impact and puncture tests, meets the impact, puncture, and thermal performance requirements of the regulations governing transport of radioactive materials. The Test Article was a replica of the front half (closure end) of the revised TRUPACT-I design. To simulate the cumulative effect of the regulatory hypothetical accident sequence, the Test Article included the structural damage found in TRUPACT-I, Unit 0 after regulatory drop and puncture testing. The Test Article was totally engulfed in a pool fire fueled by JP-4 jet fuel for 46 minutes. The maximum temperature reached at the inner door seals was 149/degree/C (300/degree/F) and the maximum temperature at the inner door filters was 171/degree/C (340/degree/F). Both temperatures are within the normal working range for these components. Post-test leak rate measurements of 0.0041 atm-cm 3 /s (ANSI standard air) between the innermost pair of door seals and 0.0046 atm-cm 3 /s (ANSI standard air) between the outermost pair of door seals verified that the performance of the silicone seals met the design requirements. Since no detectable leakage was measured to a sensitivity of 1.0E-7 atm-cm 3 /s for the filter installation seal or quick-connect valve seal post-test, the total leak rate for the containment system was less than the maximum allowable 0.01 atm-cm 3 /s (ANSI standard air). 10 refs., 52 figs., 5 tabs

Development and Initial Testing of the Tiltrotor Test Rig

Science.gov (United States)

Acree, C. W., Jr.; Sheikman, A. L.

2018-01-01

The NASA Tiltrotor Test Rig (TTR) is a new, large-scale proprotor test system, developed jointly with the U.S. Army and Air Force, to develop a new, large-scale proprotor test system for the National Full-Scale Aerodynamics Complex (NFAC). The TTR is designed to test advanced proprotors up to 26 feet in diameter at speeds up to 300 knots, and even larger rotors at lower airspeeds. This combination of size and speed is unprecedented and is necessary for research into 21st-century tiltrotors and other advanced rotorcraft concepts. The TTR will provide critical data for validation of state-of-the-art design and analysis tools.

lmerTest Package: Tests in Linear Mixed Effects Models

DEFF Research Database (Denmark)

Kuznetsova, Alexandra; Brockhoff, Per B.; Christensen, Rune Haubo Bojesen

2017-01-01

One of the frequent questions by users of the mixed model function lmer of the lme4 package has been: How can I get p values for the F and t tests for objects returned by lmer? The lmerTest package extends the 'lmerMod' class of the lme4 package, by overloading the anova and summary functions...... by providing p values for tests for fixed effects. We have implemented the Satterthwaite's method for approximating degrees of freedom for the t and F tests. We have also implemented the construction of Type I - III ANOVA tables. Furthermore, one may also obtain the summary as well as the anova table using...

Welding of metallic fuel elements for the irradiation test in JOYO. Preliminary tests and welding execution tests (Joint research)

International Nuclear Information System (INIS)

Kikuchi, Hironobu; Nakamura, Kinya; Iwai, Takashi; Arai, Yasuo

2009-10-01

Irradiation tests of metallic fuels elements in fast test reactor JOYO are planned under the joint research of Japan Atomic Energy Agency (JAEA) and Central Research Institute of Electric Power Industry (CRIEPI). Six U-Pu-Zr fuel elements clad with ferritic martensitic steel are fabricated in Plutonium Fuel Research Facility (PFRF) of JAEA-Oarai for the first time in Japan. In PFRF, the procedures of fabrication of the fuel elements were determined and the test runs of the equipments were carried out before the welding execution tests for the fuel elements. Test samples for confirming the welding condition between the cladding tube and top and bottom endplugs were prepared, and various test runs were carried out before the welding execution tests. As a result, the welding conditions were finalized by passing the welding execution tests. (author)

Science Library of Test Items. Volume Twelve. Mastery Testing Programme. [Mastery Tests Series 4.] Tests M39-M50.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As part of a series of tests to measure mastery of specific skills in the natural sciences, copies of tests 39 through 50 include: (39) using a code; (40) naming the parts of a microscope; (41) calculating density and predicting flotation; (42) estimating metric length; (43) using SI symbols; (44) using s=vt; (45) applying a novel theory; (46)…

Deliverable 3.3.2 Specification of tests and test groups

DEFF Research Database (Denmark)

Peterson, Carrie Beth; Mitseva, Anelia; Harpur, Jill

2009-01-01

Deliverable 3.3.2: Specification of tests and test groups One of the main goals of the ISISEMD project is to offer innovative ICT services to improve the quality of life of elderly persons with cognitive problems or mild dementia and their informal and formal caregivers who provide every day care...... for them. This will be done via integrating intelligent scalable ICT services which will be tested for a period of 12 months under realistic conditions. Offering the services could not be complete without evaluating quality of life improvement, user acceptance and user satisfaction with a representative...... group of the target user groups. This document is devoted to describing important aspects of services evaluation such as: who the test participants will be, inclusion and exclusion criterion, selection standards, how the test participants will be recruited, ethical considerations, etc. Test methodology...

Improving Molecular Genetic Test Utilization through Order Restriction, Test Review, and Guidance.

Science.gov (United States)

Riley, Jacquelyn D; Procop, Gary W; Kottke-Marchant, Kandice; Wyllie, Robert; Lacbawan, Felicitas L

2015-05-01

The ordering of molecular genetic tests by health providers not well trained in genetics may have a variety of untoward effects. These include the selection of inappropriate tests, the ordering of panels when the assessment of individual or fewer genes would be more appropriate, inaccurate result interpretation and inappropriate patient guidance, and significant unwarranted cost expenditure. We sought to improve the utilization of molecular genetic tests by requiring providers without specialty training in genetics to use genetic counselors and molecular genetic pathologists to assist in test selection. We used a genetic and genomic test review process wherein the laboratory-based genetic counselor performed the preanalytic assessment of test orders and test triage. Test indication and clinical findings were evaluated against the test panel composition, methods, and test limitations under the supervision of the molecular genetic pathologist. These test utilization management efforts resulted in a decrease in genetic test ordering and a gross cost savings of $1,531,913 since the inception of these programs in September 2011 through December 2013. The combination of limiting the availability of complex genetic tests and providing guidance regarding appropriate test strategies is an effective way to improve genetic tests, contributing to judicious use of limited health care resources. Copyright © 2015 American Society for Investigative Pathology and the Association for Molecular Pathology. Published by Elsevier Inc. All rights reserved.

Fire test database

International Nuclear Information System (INIS)

Lee, J.A.

1989-01-01

This paper describes a project recently completed for EPRI by Impell. The purpose of the project was to develop a reference database of fire tests performed on non-typical fire rated assemblies. The database is designed for use by utility fire protection engineers to locate test reports for power plant fire rated assemblies. As utilities prepare to respond to Information Notice 88-04, the database will identify utilities, vendors or manufacturers who have specific fire test data. The database contains fire test report summaries for 729 tested configurations. For each summary, a contact is identified from whom a copy of the complete fire test report can be obtained. Five types of configurations are included: doors, dampers, seals, wraps and walls. The database is computerized. One version for IBM; one for Mac. Each database is accessed through user-friendly software which allows adding, deleting, browsing, etc. through the database. There are five major database files. One each for the five types of tested configurations. The contents of each provides significant information regarding the test method and the physical attributes of the tested configuration. 3 figs

Development and field test of psychophysical tests for DWI arrest

Science.gov (United States)

1981-03-01

Administration and scoring procedures were standardized for a sobriety test battery consisting of the walk-and-turn test, the one leg stand test, and horizontal gaze nystagmus. The effectiveness of the standardized battery was then evaluated in the l...

Pre-test evaluation of LLTR series II Test A-7

International Nuclear Information System (INIS)

Knittle, D.

1981-03-01

The purpose of this report is to present pre-test predictions of pressure histories for the A-7 test to be conducted in the Large Leak Test Rig (LLTR) at the Energy Technology Engineering Center (ETEC) in April 1981

Pre-test evaluation of LLTR Series II Test A-6

International Nuclear Information System (INIS)

Knittle, D.

1980-11-01

Purpose of this report is to present pre-test predictions of pressure histories for the A6 test to be conducted in the Large Leak Test Facility (LLTF) at the Energy Technology Engineering Center. A6 is part of a test program being conducted to evaluate the effects of leaks produced by a double-ended guillotine rupture of a single tube. A6 will provide data on the CRBR prototypical double rupture disc performance

Test Report of Special Form Qualification Testing for the ORNL U ZipCan

Energy Technology Data Exchange (ETDEWEB)

Martinez, Oscar A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-09-01

This test report describes the special form testing activities performed on the two ZiPCans. One prototype test unit was subjected to the tests stipulated by 10 CFR 71.75 (d)(1)(i), ISO 2919:1999(E) Class 4 impact test, along with the leak rate test specified in 49 CFR 173.469(a)(4)(i). The other test unit was subjected to a leak rate test as specified in 173.469(a)(4)(i) and a heat test as specified in 49 CFR 173.469 (b)(4). Each test unit was leak tested before and after these respective tests. The leak rate tests performed were helium back-pressure tests and bubble tests, as specified in ANSI N14.5-2014.The measured leak rates were converted to standard condition leak rates as specified in ASTM E 493. The determined standardized leak rates from the test and calculation for both test units met the requirements for special form certification.

Test plan for core drilling ignitability testing

International Nuclear Information System (INIS)

Witwer, K.S.

1996-01-01

The objective of this testing is to determine if ignition occurs while core drilling in a flammable gas environment. Drilling parameters are chosen so as to provide bounding conditions for the core sampling environment. If ignition does not occur under the conditions set forth in this test, then a satisfactory level of confidence will be obtained which would allow field operations under the normal drilling conditions

Load testing circuit

DEFF Research Database (Denmark)

2009-01-01

A load testing circuit a circuit tests the load impedance of a load connected to an amplifier. The load impedance includes a first terminal and a second terminal, the load testing circuit comprising a signal generator providing a test signal of a defined bandwidth to the first terminal of the load...

Integration testing through reusing representative unit test cases for high-confidence medical software.

Science.gov (United States)

Shin, Youngsul; Choi, Yunja; Lee, Woo Jin

2013-06-01

As medical software is getting larger-sized, complex, and connected with other devices, finding faults in integrated software modules gets more difficult and time consuming. Existing integration testing typically takes a black-box approach, which treats the target software as a black box and selects test cases without considering internal behavior of each software module. Though it could be cost-effective, this black-box approach cannot thoroughly test interaction behavior among integrated modules and might leave critical faults undetected, which should not happen in safety-critical systems such as medical software. This work anticipates that information on internal behavior is necessary even for integration testing to define thorough test cases for critical software and proposes a new integration testing method by reusing test cases used for unit testing. The goal is to provide a cost-effective method to detect subtle interaction faults at the integration testing phase by reusing the knowledge obtained from unit testing phase. The suggested approach notes that the test cases for the unit testing include knowledge on internal behavior of each unit and extracts test cases for the integration testing from the test cases for the unit testing for a given test criteria. The extracted representative test cases are connected with functions under test using the state domain and a single test sequence to cover the test cases is produced. By means of reusing unit test cases, the tester has effective test cases to examine diverse execution paths and find interaction faults without analyzing complex modules. The produced test sequence can have test coverage as high as the unit testing coverage and its length is close to the length of optimal test sequences. Copyright © 2013 Elsevier Ltd. All rights reserved.

Triglycerides Test

Science.gov (United States)

... K. Brunner & Suddarth's Handbook of Laboratory and Diagnostic Tests. 2 nd Ed, Kindle. Philadelphia: Wolters Kluwer Health, Lippincott Williams & Wilkins; c2014. Triglycerides; 491–2 p. Lab Tests ...

Testing iOS apps with HadoopUnit rapid distributed GUI testing

CERN Document Server

Tilley, Scott

2014-01-01

Smartphone users have come to expect high-quality apps. This has increased the importance of software testing in mobile software development. Unfortunately, testing apps-particularly the GUI-can be very time-consuming. Exercising every user interface element and verifying transitions between different views of the app under test quickly becomes problematic. For example, execution of iOS GUI test suites using Apple's UI Automation framework can take an hour or more if the app's interface is complicated. The longer it takes to run a test, the less frequently the test can be run, which in turn re

Guidebook for the fabrication of non-destructive testing (NDT) test specimens

International Nuclear Information System (INIS)

2001-01-01

Non-destructive testing (NDT) test specimens constitute a very important part of training and certification of NDT personnel and are important for carrying out actual inspection and testing, and for achieving international harmonization of NDT practices. The IAEA organized an advisory group of experts to develop a Guidebook for Fabrication of NDT Test Specimens. The experts consulted the ISO/FDIS 9712-1999 requirements for training and certification of personnel and the suitability of various types of NDT test specimens that are needed to meet such requirements This guidebook presents a set of NDT test specimens, and the methodology and procedures for their fabrication

The Successful Test Taker: Exploring Test-Taking Behavior Profiles through Cluster Analysis

Science.gov (United States)

Stenlund, Tova; Lyrén, Per-Erik; Eklöf, Hanna

2018-01-01

To be successful in a high-stakes testing situation is desirable for any test taker. It has been found that, beside content knowledge, test-taking behavior, such as risk-taking strategies, motivation, and test anxiety, is important for test performance. The purposes of the present study were to identify and group test takers with similar patterns…

Test Plan: Sludge Treatment Project Corrosion Process Chemistry Follow-on Testing

Energy Technology Data Exchange (ETDEWEB)

Delegard, Calvin H.; Schmidt, Andrew J.; Poloski, Adam P.

2007-08-17

This test plan was prepared by the Pacific Northwest National Laboratory (PNNL) under contract with Fluor Hanford (FH). The test plan describes the scope and conditions to be used to perform laboratory-scale testing of the Sludge Treatment Project (STP) hydrothermal treatment of K Basin sludge. The STP, managed for the U. S. Department of Energy (DOE) by FH, was created to design and operate a process to eliminate uranium metal from the sludge prior to packaging for Waste Isolation Pilot Plant (WIPP) by using high temperature liquid water to accelerate the reaction, produce uranium dioxide from the uranium metal, and safely discharge the hydrogen. The proposed testing builds on the approach and laboratory test findings for both K Basin sludge and simulated sludge garnered during prior testing from September 2006 to March 2007. The outlined testing in this plan is designed to yield further understanding of the nature of the chemical reactions, the effects of compositional and process variations and the effectiveness of various strategies to mitigate the observed high shear strength phenomenon observed during the prior testing. These tests are designed to provide process validation and refinement vs. process development and design input. The expected outcome is to establish a level of understanding of the chemistry such that successful operating strategies and parameters can be implemented within the confines of the existing STP corrosion vessel design. In July 2007, the DOE provided direction to FH regarding significant changes to the scope of the overall STP. As a result of the changes, FH directed PNNL to stop work on most of the planned activities covered in this test plan. Therefore, it is unlikely the testing described here will be performed. However, to preserve the test strategy and details developed to date, the test plan has been published.

TRACG post-test analysis of panthers prototype tests of SBWR passive containment condenser

International Nuclear Information System (INIS)

Fitch, J.R.; Billig, P.F.; Abdollahian, D.; Masoni, P.

1997-01-01

As part of the validation effort for application of the TRACG code to the Simplified Boiling Water Reactor (SBWR), calculations have been performed for the various test facilities which are part of the SBWR design and technology certification program. These calculations include post-test calculations for tests in the PANTHERS Passive Containment Condenser (PCC) test program. Sixteen tests from the PANTHERS/PCC test matrix were selected for post-test analysis. This set includes three steady-state pure-steam tests, nine steady-state steam-air tests, and four transient tests. The purpose of this paper is to present and discuss the results of the post-test analysis. The author includes a brief description of the PANTHERS/PCC test facility and test matrix, a description of the PANTHERS/PCC post-test TRACG model and the manner in which the various types of tests in the post-test evaluation were simulated, and a presentation of the results of the TRACG simulation

Randomization tests

National Research Council Canada - National Science Library

Edgington, Eugene S

1980-01-01

.... This book provides all the necessary theory and practical guidelines, such as instructions for writing computer programs, to permit experimenters to transform any statistical test into a distribution-free test...

Nationale test

DEFF Research Database (Denmark)

2009-01-01

Professor Sven Erik Nordenbo og centerleder Niels Egelund, begge DPU, i samtale om nationale test.......Professor Sven Erik Nordenbo og centerleder Niels Egelund, begge DPU, i samtale om nationale test....

MEGAPIE-TEST: A European Project on Spallation Target Testing

International Nuclear Information System (INIS)

Knebel, Joachim U.; Klein, Jean-Christophe; Gorse, Dominique; Agostini, Pietro; Groeschel, Friedrich; Kupschus, Peter; Kirchner, Thomas; Vogt, Jean-Bernard

2002-01-01

Within the Euratom 5. Framework Programme (5FP) the European Commission is funding the MEGAPIE-TEST Project (Megawatt Pilot Experiment - Testing) over a period of three years, starting in September 2001. The project is combining the efforts of 8 main associations. MEGAPIE is a liquid metal spallation target of 1 MW of beam power. The main results of the MEGAPIE-TEST project will be: Development and comprehensive testing of a liquid metal spallation target both under beam-off and beam-on conditions, and the set up of a handbook on the design of a neutron spallation source in general. The operation of MEGAPIE within the accelerator complex SINQ at Paul Scherrer Institute (PSI), Switzerland, is envisaged in 2004. MEGAPIE is a first decisive step to realize a liquid metal spallation target in Europe. This report is giving an overview of the MEGAPIE-TEST Project, the overall work plan, and preliminary results from the design support and validation, which form an important basis for the project. (authors)

Fusion Materials Irradiation Test Facility: experimental capabilities and test matrix

International Nuclear Information System (INIS)

Opperman, E.K.

1982-01-01

This report describes the experimental capabilities of the Fusion Materials Irradiation Test Facility (FMIT) and reference material specimen test matrices. The description of the experimental capabilities and the test matrices has been updated to match the current single test cell facility ad assessed experimenter needs. Sufficient detail has been provided so that the user can plan irradiation experiments and conceptual hardware. The types of experiments, irradiation environment and support services that will be available in FMIT are discussed

Injection Tests

CERN Document Server

Kain, V

2009-01-01

The success of the start-up of the LHC on 10th of September was in part due to the preparation without beam and injection tests in 2008. The injection tests allowed debugging and improvement in appropriate portions to allow safe, efficient and state-of-the-art commissioning later on. The usefulness of such an approach for a successful start-up becomes obvious when looking at the problems we encountered before and during the injection tests and could solve during this period. The outline of the preparation and highlights of the different injection tests will be presented and the excellent performance of many tools discussed. A list of shortcomings will follow, leading to some planning for the preparation of the run in 2009.

Nondestructive testing method

International Nuclear Information System (INIS)

Porter, J.F.

1996-01-01

Nondestructive testing (NDT) is the use of physical and chemical methods for evaluating material integrity without impairing its intended usefulness or continuing service. Nondestructive tests are used by manufaturer's for the following reasons: 1) to ensure product reliability; 2) to prevent accidents and save human lives; 3) to aid in better product design; 4) to control manufacturing processes; and 5) to maintain a uniform quality level. Nondestructive testing is used extensively on power plants, oil and chemical refineries, offshore oil rigs and pipeline (NDT can even be conducted underwater), welds on tanks, boilers, pressure vessels and heat exchengers. NDT is now being used for testing concrete and composite materials. Because of the criticality of its application, NDT should be performed and the results evaluated by qualified personnel. There are five basic nondestructive examination methods: 1) liquid penetrant testing - method used for detecting surface flaws in materials. This method can be used for metallic and nonmetallic materials, portable and relatively inexpensive. 2) magnetic particle testing - method used to detect surface and subsurface flaws in ferromagnetic materials; 3) radiographic testing - method used to detect internal flaws and significant variation in material composition and thickness; 4) ultrasonic testing - method used to detect internal and external flaws in materials. This method uses ultrasonics to measure thickness of a material or to examine the internal structure for discontinuities. 5) eddy current testing - method used to detect surface and subsurface flaws in conductive materials. Not one nondestructive examination method can find all discontinuities in all of the materials capable of being tested. The most important consideration is for the specifier of the test to be familiar with the test method and its applicability to the type and geometry of the material and the flaws to be detected

Development in design of test infrastructure for ITER prototype cryoline test

International Nuclear Information System (INIS)

Ketan, Choukekar; Ritendra, Bhattacharya; Nitin, Shah; Muralidhara, Srinivasa; Himanshu, Kapoor; Pratik, Patel; Uday, Kumar; Biswanath, Sarkar

2015-01-01

The prototype cryoline (PTCL) for ITER is a representative cryoline from the complex network of all cryolines for the project. PTCL consist of six process pipes (of which four are operating at 4 K temperature level while two are operating at 80 K temperature level), thermal shield and outer vacuum jacket. PTCL will be tested for its thermal performance, mechanical integrity, leak tightness and functioning of components at cryogenic temperatures. The test infrastructure requirements for testing of PTCL have been identified based on the optimized test methodology. The best suited infrastructure option to test PTCL involves 80K system with helium compressor, test boxes, liquid helium Dewar, liquid nitrogen Dewar and interconnecting cryolines. Process study and various analyses have been performed to finalize the specifications of test infrastructure. The present work describes study on global thermo-hydraulic analysis of PTCL test infrastructure. Preliminary process simulation using the ASPEN HYSYS® has been performed to study the dynamic behavior of 80K system. (author)

Comparative testing of radiographic testing, ultrasonic testing and phased array advanced ultrasonic testing non destructive testing techniques in accordance with the AWS D1.5 bridge welding code.

Science.gov (United States)

2014-02-01

A comprehensive body of non-destructive testing data was collected from steel bridge welds under real-world conditions in a fabricators shop. Three different non-destructive testing (NDT) techniques were used on each weld inspection, these being R...

Face Perception and Test Reliabilities in Congenital Prosopagnosia in Seven Tests

Directory of Open Access Journals (Sweden)

Janina Esins

2016-01-01

Full Text Available Congenital prosopagnosia, the innate impairment in recognizing faces, is a very heterogeneous disorder with different phenotypical manifestations. To investigate the nature of prosopagnosia in more detail, we tested 16 prosopagnosics and 21 controls with an extended test battery addressing various aspects of face recognition. Our results show that prosopagnosics exhibited significant impairments in several face recognition tasks: impaired holistic processing (they were tested amongst others with the Cambridge Face Memory Test (CFMT as well as reduced processing of configural information of faces. This test battery also revealed some new findings. While controls recognized moving faces better than static faces, prosopagnosics did not exhibit this effect. Furthermore, prosopagnosics had significantly impaired gender recognition—which is shown on a groupwise level for the first time in our study. There was no difference between groups in the automatic extraction of face identity information or in object recognition as tested with the Cambridge Car Memory Test. In addition, a methodological analysis of the tests revealed reduced reliability for holistic face processing tests in prosopagnosics. To our knowledge, this is the first study to show that prosopagnosics showed a significantly reduced reliability coefficient (Cronbach’s alpha in the CFMT compared to the controls. We suggest that compensatory strategies employed by the prosopagnosics might be the cause for the vast variety of response patterns revealed by the reduced test reliability. This finding raises the question whether classical face tests measure the same perceptual processes in controls and prosopagnosics.

Test requirements for the integral effect test to simulate Korean PWR plants

Energy Technology Data Exchange (ETDEWEB)

Song, Chul Hwa; Park, C. K.; Lee, S. J.; Kwon, T. S.; Yun, B. J.; Chung, M. K

2001-02-01

In this report, the test requirements are described for the design of the integral effect test facility to simulate Korean PWR plants. Since the integral effect test facility should be designed so as to simulate various thermal hydraulic phenomena, as closely as possible, to be occurred in real plants during operation or anticipated transients, the design and operational characteristics of the reference plants (Korean Standard Nuclear Plant and Korean Next Generation Reactor)were analyzed in order to draw major components, systems, and functions to be satisfied or simulated in the test facility. The test matrix is set up by considering major safety concerns of interest and the test objectives to confirm and enhance the safety of the plants. And the analysis and prioritization of the test matrix leads to the general design requirements of the test facility. Based on the general design requirements, the design criteria is set up for the basic and detailed design of the test facility. And finally it is drawn the design requirements specific to the fluid system and measurement system of the test facility. The test requirements in this report will be used as a guideline to the scaling analysis and basic design of the test facility. The test matrix specified in this report can be modified in the stage of main testing by considering the needs of experiments and circumstances at that time.

Test requirements for the integral effect test to simulate Korean PWR plants

International Nuclear Information System (INIS)

Song, Chul Hwa; Park, C. K.; Lee, S. J.; Kwon, T. S.; Yun, B. J.; Chung, M. K.

2001-02-01

In this report, the test requirements are described for the design of the integral effect test facility to simulate Korean PWR plants. Since the integral effect test facility should be designed so as to simulate various thermal hydraulic phenomena, as closely as possible, to be occurred in real plants during operation or anticipated transients, the design and operational characteristics of the reference plants (Korean Standard Nuclear Plant and Korean Next Generation Reactor)were analyzed in order to draw major components, systems, and functions to be satisfied or simulated in the test facility. The test matrix is set up by considering major safety concerns of interest and the test objectives to confirm and enhance the safety of the plants. And the analysis and prioritization of the test matrix leads to the general design requirements of the test facility. Based on the general design requirements, the design criteria is set up for the basic and detailed design of the test facility. And finally it is drawn the design requirements specific to the fluid system and measurement system of the test facility. The test requirements in this report will be used as a guideline to the scaling analysis and basic design of the test facility. The test matrix specified in this report can be modified in the stage of main testing by considering the needs of experiments and circumstances at that time

Pump testing in the nuclear industry: The comprehensive test and other considerations

International Nuclear Information System (INIS)

Hoyle, T.F.

1992-01-01

The American Society of Mechanical Engineers Operations and Maintenance Working Group on Pumps and Valves is working on a revision to their pump testing Code, ISTB-1990. This revision will change the basic philosophy of pump testing in the nuclear industry. Currently, all pumps are required to be tested quarterly, except those installed in dry sumps. In the future standby pumps will receive only a start test quarterly to ensure the pump comes up to speed and pressure or flow. Then, on a biennial basis all pumps would receive a more extensive test. This comprehensive test would require high accuracy test gauges to be used, and the pumps would be required to be tested near pump design flow. Testing on minimum flow loops would not be permitted except in rare cases. Additionally. during the comprehensive test, measurements of vibration, flow, and pressure would all be taken. The OM-6 standard (ISTB Code) will also require that reference values of flow rate and differential pressure be taken at several points instead of just one point, which is current practice. The comprehensive test is just one step in ensuring the adequacy of pump testing in the nuclear industry. This paper also addresses other concerns and makes recommendations for increased quality of testing of certain critical pumps and recommendations for less stringent or no tests on less critical pumps

Coaxial test fixture

Science.gov (United States)

Praeg, Walter F.

1986-01-01

An assembly is provided for testing one or more contact material samples in a vacuum environment. The samples are positioned as an inner conductive cylinder assembly which is mounted for reciprocal vertical motion as well as deflection from a vertical axis. An outer conductive cylinder is coaxially positioned around the inner cylinder and test specimen to provide a vacuum enclosure therefor. A power source needed to drive test currents through the test specimens is connected to the bottom of each conductive cylinder, through two specially formed conductive plates. The plates are similar in form, having a plurality of equal resistance current paths connecting the power source to a central connecting ring. The connecting rings are secured to the bottom of the inner conductive assembly and the outer cylinder, respectively. A hydraulic actuator is also connected to the bottom of the inner conductor assembly to adjust the pressure applied to the test specimens during testing. The test assembly controls magnetic forces such that the current distribution through the test samples is symmetrical and that contact pressure is not reduced or otherwise disturbed.

Laboratory Tests

Science.gov (United States)

... Medical Devices Radiation-Emitting Products Vaccines, Blood & Biologics Animal & ... What are lab tests? Laboratory tests are medical devices that are intended for use on samples of blood, urine, or other tissues ...

Teacher Test Accountability.

Directory of Open Access Journals (Sweden)

Larry H. Ludlow

2001-02-01

Full Text Available Given the high stakes of teacher testing, there is no doubt that every teacher test should meet the industry guidelines set forth in the Standards for Educational and Psychological Testing. Unfortunately, however, there is no public or private business or governmental agency that serves to certify or in any other formal way declare that any teacher test does, in fact, meet the psychometric recommendations stipulated in the Standards. Consequently, there are no legislated penalties for faulty products (tests nor are there opportunities for test takers simply to raise questions about a test and to have their questions taken seriously by an impartial panel. The purpose of this article is to highlight some of the psychometric results reported by National Evaluation Systems (NES in their 1999 Massachusetts Educator Certification Test (MECT Technical Report, and more specifically, to identify those technical characteristics of the MECT that are inconsistent with the Standards. A second purpose of this article is to call for the establishment of a standing test auditing organization with investigation and sanctioning power. The significance of the present analysis is twofold: a psychometric results for the MECT are similar in nature to psychometric results presented as evidence of test development flaws in an Alabama class-action lawsuit dealing with teacher certification (an NES-designed testing system; and b there was no impartial enforcement agency to whom complaints about the Alabama tests could be brought, other than the court, nor is there any such agency to whom complaints about the Massachusetts tests can be brought. I begin by reviewing NES's role in Allen v. Alabama State Board of Education, 81-697-N. Next I explain the purpose and interpretation of standard item analysis procedures and statistics. Finally, I present results taken directly from the 1999 MECT Technical Report and compare them to procedures, results, and consequences of

Credibility test; Vertrauens-Test

Energy Technology Data Exchange (ETDEWEB)

Fuhs, Michael

2009-07-01

Solar wafer producers must prove their quality standards. Q-Cells has started a marketing office and opened their test center to journalists. They are aware that adherence to standards is going only half the way of quality assurance. The other half consists in gaining the customers' trust. (orig.)

Automation of Test Cases for Web Applications : Automation of CRM Test Cases

OpenAIRE

Seyoum, Alazar

2012-01-01

The main theme of this project was to design a test automation framework for automating web related test cases. Automating test cases designed for testing a web interface provide a means of improving a software development process by shortening the testing phase in the software development life cycle. In this project an existing AutoTester framework and iMacros test automation tools were used. CRM Test Agent was developed to integrate AutoTester to iMacros and to enable the AutoTester,...

Test plan for Series 2 spent fuel cladding containment credit tests

International Nuclear Information System (INIS)

Wilson, C.N.

1984-10-01

This test plan describes a second series of tests to be conducted by Westinghouse Hanford Company (WHC) to evaluate the effectiveness of breached cladding as a barrier to radionuclide release in the NNWSI-proposed geologic repository. These tests will be conducted at the Hanford Engineering Development Laboratory (HEDL). A first series of tests, initiated at HEDL during FY 1983, demonstrated specimen preparation and feasibility of the testing concept. The second series tests will be similar to the Series 1 tests with the following exceptions: NNWSI reference groundwater obtained from well J-13 will be used as the leachant instead of deionized water; fuel from a second source will be used; and certain refinements will be made in specimen preparation, sampling, and analytical procedures. 12 references, 5 figures, 5 tables

Putting the Testing Effect to the Test. Why and When is Testing effective for Learning in Secondary School

NARCIS (Netherlands)

Dirkx, Kim

2014-01-01

Dirkx, K. J. H. (2014, 11 April). Putting the testing effect to the test. Why and when is testing effective for learning in secondary school. Unpublished doctoral dissertation. Heerlen: Open University of the Netherlands

Preliminary test conditions for KNGR SBLOCA DVI ECCS performance test

International Nuclear Information System (INIS)

Bae, Kyoo Whan; Song, Jin Ho; Chung, Young Jong; Sim, Suk Ku; Park, Jong Kyun

1999-03-01

The Korean Next Generation Reactor (KNGR) adopts 4-train Direct Vessel Injection (DVI) configuration and injects the safety injection water directly into the downcomer through the 8.5'' DVI nozzle. Thus, the thermal hydraulic phenomena such as ECCS mixing and bypass are expected to be different from those observed in the cold leg injection. In order to investigate the realistic injection phenomena and modify the analysis code developed in the basis of cold leg injection, thermal hydraulic test with the performance evaluation is required. Preliminarily, the sequence of events and major thermal hydraulic phenomena during the small break LOCA for KNGR are identified from the analysis results calculated by the CEFLASH-4AS/REM. It is shown from the analysis results that the major transient behaviors including the core mixture level are largely affected by the downcomer modeling. Therefore, to investigate the proper thermal hydraulic phenomena occurring in the downcomer with limited budget and time, the separate effects test focusing on this region is considered to be effective and the conceptual test facility based on this recommended. For this test facility the test initial and boundary conditions are developed using the CEFLASH-4AS/REM analysis results that will be used as input for the preliminary test requirements. The final test requirements will be developed through the further discussions with the test performance group. (Author). 10 refs., 18 tabs., 4 figs

Collaborative Testing: Cognitive and Interpersonal Processes Related to Enhanced Test Performance

Science.gov (United States)

Kapitanoff, Susan H.

2009-01-01

Research has demonstrated that collaborative testing, working on tests in groups, leads to improved test scores but the mechanism by which this occurs has not been specified. Three factors were proposed as mediators: cognitive processes, interpersonal interactions and reduced test-anxiety. Thirty-three students completed a multiple-choice exam…

Initial field testing definition of subsurface sealing and backfilling tests in unsaturated tuff

International Nuclear Information System (INIS)

Fernandez, J.A.; Case, J.B.; Tyburski, J.R.

1993-05-01

This report contains an initial definition of the field tests proposed for the Yucca Mountain Project repository sealing program. The tests are intended to resolve various performance and emplacement concerns. Examples of concerns to be addressed include achieving selected hydrologic and structural requirements for seals, removing portions of the shaft liner, excavating keyways, emplacing cementitious and earthen seals, reducing the impact of fines on the hydraulic conductivity of fractures, efficient grouting of fracture zones, sealing of exploratory boreholes, and controlling the flow of water by using engineered designs. Ten discrete tests are proposed to address these and other concerns. These tests are divided into two groups: Seal component tests and performance confirmation tests. The seal component tests are thorough small-scale in situ tests, the intermediate-scale borehole seal tests, the fracture grouting tests, the surface backfill tests, and the grouted rock mass tests. The seal system tests are the seepage control tests, the backfill tests, the bulkhead test in the Calico Hills unit, the large-scale shaft seal and shaft fill tests, and the remote borehole sealing tests. The tests are proposed to be performed in six discrete areas, including welded and non-welded environments, primarily located outside the potential repository area. The final selection of sealing tests will depend on the nature of the geologic and hydrologic conditions encountered during the development of the Exploratory Studies Facility and detailed numerical analyses. Tests are likely to be performed both before and after License Application

Performances on Symbol Digit Modalities Test, Color Trails Test, and modified Stroop test in a healthy, elderly Danish sample

DEFF Research Database (Denmark)

Vogel, Asmus; Stokholm, Jette; Jørgensen, Kasper

2013-01-01

This study presents Danish data for the Symbol Digit Modalities Test (SDMT), Color Trails Test (CTT), and a modified Stroop test from 100 subjects aged 60-87 years. Among the included demographic variables, age had the highest impact on test performances. Thus, the study presents separate data...

Testing activities at the National Battery Test Laboratory

Science.gov (United States)

Hornstra, F.; Deluca, W. H.; Mulcahey, T. P.

The National Battery Test Laboratory (NBTL) is an Argonne National Laboratory facility for testing, evaluating, and studying advanced electric storage batteries. The facility tests batteries developed under Department of Energy programs and from private industry. These include batteries intended for future electric vehicle (EV) propulsion, electric utility load leveling (LL), and solar energy storage. Since becoming operational, the NBTL has evaluated well over 1400 cells (generally in the form of three- to six-cell modules, but up to 140-cell batteries) of various technologies. Performance characterization assessments are conducted under a series of charge/discharge cycles with constant current, constant power, peak power, and computer simulated dynamic load profile conditions. Flexible charging algorithms are provided to accommodate the specific needs of each battery under test. Special studies are conducted to explore and optimize charge procedures, to investigate the impact of unique load demands on battery performance, and to analyze the thermal management requirements of battery systems.

Testing device for pipeline groups and control method for testing device

International Nuclear Information System (INIS)

Naito, Shinji; Kajiyama, Shigeru; Takahashi, Fuminobu; Tsuchida, Kenji; Tachibana, Yukio; Shigehiro, Katsuya; Mahara, Yoichi.

1995-01-01

The device of the present invention comprises a testing device main body disposed to a rail, a movable mechanism positioning from a reference point, a circumferential direction scanning mechanism, an axial direction scanning mechanism, a posture control mechanism, and a testing probe. Upon testing of pipelines, the detection device main body and auxiliary members are moved from a reference point previously set on a rail for numerical control toward pipelines to be tested in a state where the axial direction scanning mechanism and the testing probe are suspended in the axial direction. The testing is conducted by controlling the position of the testing probe in the axial direction of the pipeline by means of the axial direction scanning mechanism, and scanning the testing probe to the outer circumference of the pipeline along the circumferential track by way of the circumferential direction scanning mechanism. The device can be extremely reduced in the thickness, and can be moved with no interference with pipelines and other obstacles by remote operation even under such undesired condition as the pipelines being crowded, so that non-destructive testing can be conducted accurately. (N.H.)

Guideline for penetrant testing on welds by indirect visual test

International Nuclear Information System (INIS)

Tanaka, Isao; Taguchi, Tetsuo; Asano, Toshio; Sakai, Kaoru; Sato, Takemitsu; Takagi, Mikio

1999-01-01

A study of guidelines for penetrant testing on welds by indirect visual test using image processing is presented. Due to penetrant testing regulations by direct visual test, a porosity (a round defect) whose diameter is under 1.0 mm is allowed, but no crack (a line-shaped defect) is allowed, and the allowable defect size is not clear. It was found in the investigation that the smallest line-shaped indication which the inspectors could recognize was 0.15 mm in width and 0.5 mm in length. This means that the limit of line pair which all inspectors could discriminate was 3.3. A TV camera was used to take pictures of the NSIT (National Institute of Standards and Technology) (NBS: National Bureau of Standard) resolution chart and the smallest indication above, and the limit of line pair which all inspectors could discriminate was 3.6. Therefore, it is recommended as a guideline for penetrant testing through a TV camera by indirect visual test that the resolution of 3.6 line pair per mm is required and a reference test piece be defined to assure the resolution. (author)