WorldWideScience

Sample records for temperature oxidation resistance

  1. Oxidation resistant iron and nickel alloys for high temperature use

    Science.gov (United States)

    Hill, V. L.; Misra, S. K.; Wheaton, H. L.

    1970-01-01

    Iron-base and nickel-base alloys exhibit good oxidation resistance and improved ductility with addition of small amounts of yttrium, tantalum /or hafnium/, and thorium. They can be used in applications above the operating temperatures of the superalloys, if high strength materials are not required.

  2. Development of Creep-Resistant and Oxidation-Resistant Austenitic Stainless Steels for High Temperature Applications

    Science.gov (United States)

    Maziasz, Philip J.

    2017-11-01

    Austenitic stainless steels are cost-effective materials for high-temperature applications if they have the oxidation and creep resistance to withstand prolonged exposure at such conditions. Since 1990, Oak Ridge National Laboratory (ORNL) has developed advanced austenitic stainless steels with creep resistance comparable to Ni-based superalloy 617 at 800-900°C based on specially designed "engineered microstructures" utilizing a microstructure/composition database derived from about 20 years of radiation effect data on steels. The wrought high temperature-ultrafine precipitate strengthened (HT-UPS) steels with outstanding creep resistance at 700-800°C were developed for supercritical boiler and superheater tubing for fossil power plants in the early 1990s, the cast CF8C-Plus steels were developed in 1999-2001 for land-based gas turbine casing and diesel engine exhaust manifold and turbocharger applications at 700-900°C, and, in 2015-2017, new Al-modified cast stainless steels with oxidation and creep resistance capabilities up to 950-1000°C were developed for automotive exhaust manifold and turbocharger applications. This article reviews and summarizes their development and their properties and applications.

  3. Development of Creep-Resistant and Oxidation-Resistant Austenitic Stainless Steels for High Temperature Applications

    Science.gov (United States)

    Maziasz, Philip J.

    2018-01-01

    Austenitic stainless steels are cost-effective materials for high-temperature applications if they have the oxidation and creep resistance to withstand prolonged exposure at such conditions. Since 1990, Oak Ridge National Laboratory (ORNL) has developed advanced austenitic stainless steels with creep resistance comparable to Ni-based superalloy 617 at 800-900°C based on specially designed "engineered microstructures" utilizing a microstructure/composition database derived from about 20 years of radiation effect data on steels. The wrought high temperature-ultrafine precipitate strengthened (HT-UPS) steels with outstanding creep resistance at 700-800°C were developed for supercritical boiler and superheater tubing for fossil power plants in the early 1990s, the cast CF8C-Plus steels were developed in 1999-2001 for land-based gas turbine casing and diesel engine exhaust manifold and turbocharger applications at 700-900°C, and, in 2015-2017, new Al-modified cast stainless steels with oxidation and creep resistance capabilities up to 950-1000°C were developed for automotive exhaust manifold and turbocharger applications. This article reviews and summarizes their development and their properties and applications.

  4. Optimization of Oxidation Temperature for Commercially Pure Titanium to Achieve Improved Corrosion Resistance

    Science.gov (United States)

    Bansal, Rajesh; Singh, J. K.; Singh, Vakil; Singh, D. D. N.; Das, Parimal

    2017-03-01

    Thermal oxidation of commercially pure titanium (cp-Ti) was carried out at different temperatures, ranging from 200 to 900 °C to achieve optimum corrosion resistance of the thermally treated surface in simulated body fluid. Scanning electron microscopy, x-ray diffraction, Raman spectroscopy and electrochemical impedance spectroscopy techniques were used to characterize the oxides and assess their protective properties exposed in the test electrolyte. Maximum resistance toward corrosion was observed for samples oxidized at 500 °C. This was attributed to the formation of a composite layer of oxides at this temperature comprising Ti2O3 (titanium sesquioxide), anatase and rutile phases of TiO2 on the surface of cp-Ti. Formation of an intact and pore-free oxide-substrate interface also improved its corrosion resistance.

  5. Effect of Nb Doping on High Temperature Oxidation Resistance of Ti-Al Alloyed Coatings

    Directory of Open Access Journals (Sweden)

    DAI Jing-jie

    2017-02-01

    Full Text Available Ti-Al alloyed coatings with different Nb doping contents were fabricated on TC4 titanium alloy by laser surface alloying to improve high temperature oxidation resistance of the alloy. Structures and high temperature oxidation behaviors of the alloyed coatings were analyzed and tested by X-ray diffraction (XRD, scanning electron microscope (SEM, energy dispersive spectrometer (EDS and box-type resistance furnace. The results show that the alloyed coatings consist of TiAl and Ti3Al, and no niobium compound are formed in Ti-Al-Nb alloyed coatings. The alloyed coatings are uniform and exhibit excellent metallurgical bonding with the substrates. A large amount of surface cracks and a few penetrating cracks are formed in Ti-Al alloyed coating without Nb doping, while no obvious cracks are formed in Ti-Al alloyed coating with Nb doping. The oxidation mass gains of all the alloyed coatings were significantly lower than those of the substrate. The alloyed coatings with Nb doping exhibit more excellent high temperature oxidation resistance due to the beneficial machanism of Nb doping. The mechanism of Nb doping on improving high temperature oxidation resistance of Ti-Al alloyed coatings includes reducing the defect concentration of TiO2, refining oxide grains and promoting the formation of Al2O3.

  6. Modified ferritic iron alloys with improved high-temperature mechanical properties and oxidation resistance

    Science.gov (United States)

    Oldrieve, R. E.

    1975-01-01

    An alloy modification program was conducted in which the compositions of two existing Fe-Cr-Al alloys (Armco 18SR and GE-1541) were changed to achieve either improved high-temperature strength or improved fabricability. Only modifications of Armco 18SR were successful in achieving increased strength without loss of fabricability or oxidation resistance. The best modified alloy, designated NASA-18T, had twice the rupture strength of Armco 18SR at 800 and 1000 C. The NASA-18T alloy also had better oxidation resistance than Armco 18SR and comparable fabricability. The nominal composition of NASA-18T is Fe-18Cr-2Al-1Si-1.25Ta. All attempted modifications of the GE-1541 alloy were unsuccessful in terms of achieving better fabricability without sacrificing high-temperature strength and oxidation resistance.

  7. 9% Cr steel high temperature oxidation. Solutions investigated for improving corrosion resistance of the steel

    Energy Technology Data Exchange (ETDEWEB)

    Evin, Harold Nicolas; Heintz, Olivier; Chevalier, Sebastien [UMR 5209 CNRS-Bourgogne Univ. (France). Lab. Interdisciplinaire Carnot de Bourgogne; Foejer, Cecilia; Jakani, Saad; Dhont, Annick; Claessens, Serge [OCAS N.V. ArcelorMittal Global R and D, Gent (Belgium)

    2010-07-01

    The improvement of high temperature oxidation resistance of low chromium content steels, such as T/P91, is of great interest in regards with their application in thermal power generating plants. Indeed, they possess good creep properties, but are facing their limits of use at temperature higher than 600 C, due to accelerated corrosion phenomena. Good knowledge of the mechanisms involved during their oxidation process is needed to prevent the degradation of the materials and to extend life time of the power plants components. Oxide layers thermally grown, on 9% Cr steels (provided by OCAS N.V), during isothermal tests between 600 C and 750 C in laboratory air under atmospheric pressure were investigated, by Scanning Electron Microscopy (SEM) and X-ray diffraction (XRD). The oxidation behaviour appeared very limited at 750 C, due to the presence of a breakaway, which can be linked to iron porous oxide grown over the surface of the samples. ''In situ'' X-ray Photoelectron spectroscopy (XPS) analyses were performed in air at 600 C after short exposures (between 5 min and 25 h). A complex mixture of iron oxide, Cr{sub 2}O{sub 3} and Cr (VI) species were characterized in the scales. The in-situ analyses were compared and related to XPS analyses performed on thick oxide scales formed on samples oxidized in air at 600 C for 100h. An oxidation mechanism is then proposed to understand the oxide scale growth in the temperature range 600 - 750 C. The second step of this study consists in improving the high temperature corrosion resistance of these steels without modifying their mechanical properties. Thus several solutions were investigated such as MOCVD coatings, pack cementation coatings, and tested in cycle conditions prior. (orig.)

  8. Alloying effects on the high-temperature oxidation resistance of Cr-Cr{sub 2}Nb

    Energy Technology Data Exchange (ETDEWEB)

    Tortorelli, P.F.; DeVan, J.H.

    1994-09-01

    Alloying effects on the high-temperature oxidation resistance of Cr-Cr{sub 2}Nb were examined on the basis of isothermal exposures to air at 950 C. Additions of either Re and Al or Fe, Ni, and Al had relatively little effect on weight gains relative to the Cr-6% Nb binary alloy. One alloying element that improved the mechanical behavior of Cr-Cr{sub 2}Nb alloys substantially increased the oxidation rates and spallation susceptibilities of Cr-6 and -12% Nb alloys. However, the addition of another element completely offset these deleterious effects. The presence of this latter element resulted in the best overall oxidation behavior (in terms of both weight gains and spallation tendencies) of all Cr-Cr{sub 2}Nb compositions. Its beneficial effect can be attributed to improvement in the oxidation resistance of the Cr-rich phase.

  9. Bipolar resistive switching in room temperature grown disordered vanadium oxide thin-film devices

    Science.gov (United States)

    Wong, Franklin J.; Sriram, Tirunelveli S.; Smith, Brian R.; Ramanathan, Shriram

    2013-09-01

    We demonstrate bipolar switching with high OFF/ON resistance ratios (>104) in Pt/vanadium oxide/Cu structures deposited entirely at room temperature. The SET (RESET) process occurs when negative (positive) bias is applied to the top Cu electrode. The vanadium oxide (VOx) films are amorphous and close to the vanadium pentoxide stoichiometry. We also investigated Cu/VOx/W structures, reversing the position of the Cu electrode, and found the same polarity dependence with respect to the top and bottom electrodes, which suggests that the bipolar nature is linked to the VOx layer itself. Bipolar switching can be observed at 100 °C, indicating that it not due to a temperature-induced metal-insulator transition of a vanadium dioxide second phase. We discuss how ionic drift can lead to the bipolar electrical behavior of our junctions, similar to those observed in devices based on several other defective oxides. Such low-temperature processed oxide switches could be of relevance to back-end or package integration processing schemes.

  10. Effects of composite scale on high temperature oxidation resistance of Fe-Cr-Ni heat resistant alloy

    OpenAIRE

    Wang Haitao; Wang Yuqing; Yu Huashun

    2009-01-01

    Fe-Cr-Ni heat resistant alloys with aluminum and silicon addition, alone and in combination, were melted using an intermediate frequency induction furnace with a non-oxidation method. By the oxidation weight gain method, the oxidation resistances of the test alloys were determined at 1,200 ìC for 500 hours. According to the oxidation weight gains, the oxidation kinetic curves were plotted and the functions were regressed by the least squares method. The results show that the oxidation kinetic...

  11. High temperature oxidation resistance of rare earth chromite coated Fe-20Cr and Fe-20Cr-4Al alloys

    Directory of Open Access Journals (Sweden)

    Marina Fuser Pillis

    2007-09-01

    Full Text Available Doped lanthanum chromite has been used in solid oxide fuel cell (SOFC interconnects. The high costs involved in obtaining dense lanthanum chromite have increased efforts to find suitable metallic materials for interconnects. In this context, the oxidation behavior of lanthanum chromite coated Fe-20Cr and Fe-20Cr-4Al alloys at SOFC operation temperature was studied. Isothermal oxidation tests were carried out at 1000 °C for 20, 50 and 200 hours. Cyclic oxidation tests were also carried out and each oxidation cycle consisted of 7 hours at 1000/°C followed by cooling to room temperature. The oxidation measurements and the results of SEM/EDS as well as XRD analyses indicated that lanthanum chromite coated Fe-20Cr and Fe-20Cr-4Al alloys were significantly more resistant to oxidation compared with the uncoated alloys.

  12. Oxidation Resistant Graphite Studies

    Energy Technology Data Exchange (ETDEWEB)

    W. Windes; R. Smith

    2014-07-01

    The Very High Temperature Reactor (VHTR) Graphite Research and Development Program is investigating doped nuclear graphite grades exhibiting oxidation resistance. During a oxygen ingress accident the oxidation rates of the high temperature graphite core region would be extremely high resulting in significant structural damage to the core. Reducing the oxidation rate of the graphite core material would reduce the structural effects and keep the core integrity intact during any air-ingress accident. Oxidation testing of graphite doped with oxidation resistant material is being conducted to determine the extent of oxidation rate reduction. Nuclear grade graphite doped with varying levels of Boron-Carbide (B4C) was oxidized in air at nominal 740°C at 10/90% (air/He) and 100% air. The oxidation rates of the boronated and unboronated graphite grade were compared. With increasing boron-carbide content (up to 6 vol%) the oxidation rate was observed to have a 20 fold reduction from unboronated graphite. Visual inspection and uniformity of oxidation across the surface of the specimens were conducted. Future work to determine the remaining mechanical strength as well as graphite grades with SiC doped material are discussed.

  13. Temperature-modulated graphene oxide resistive humidity sensor for indoor air quality monitoring.

    Science.gov (United States)

    De Luca, A; Santra, S; Ghosh, R; Ali, S Z; Gardner, J W; Guha, P K; Udrea, F

    2016-02-28

    In this paper we present a temperature-modulated graphene oxide (GO) resistive humidity sensor that employs complementary-metal-oxide-semiconductor (CMOS) micro-electro-mechanical-system (MEMS) micro-hotplate technology for the monitoring and control of indoor air quality (IAQ). GO powder is obtained by chemical exfoliation, dispersed in water and deposited via ink-jet printing onto a low power micro-hotplate. Atomic force microscopy (AFM) and transmission electron microscopy (TEM) show the typical layered and wrinkled morphology of the GO. Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and Fourier transform infra-red (FTIR) spectroscopy indicate that the GO flakes possess a significant number of oxygen containing functional groups (epoxy, carbonyl, hydroxyl) extremely attractive for humidity detection. Electro-thermal characterisation of the micro-hotplates shows a thermal efficiency of 0.11 mW per °C, resulting in a sensor DC power consumption of only 2.75 mW at 50 °C. When operated in an isothermal mode, the sensor response is detrimentally affected by significant drift, hysteretic behaviour, slow response/recovery times and hence poor RH level discrimination. Conversely, a temperature modulation technique coupled with a differential readout methodology results in a significant reduction of the sensor drift, improved linear response with a sensitivity of 0.14 mV per %, resolution below 5%, and a maximum hysteresis of ±5%; response and recovery times equal to 189 ± 49 s and 89 ± 5 s, respectively. These performance parameters satisfy current IAQ monitoring requirements. We have thus demonstrated the effectiveness of integrating GO on a micro-hotplate CMOS-compatible platform enabling temperature modulation schemes to be easily applied in order to achieve compact, low power, low cost humidity IAQ monitoring.

  14. Effects of composite scale on high temperature oxidation resistance of Fe-Cr-Ni heat resistant alloy

    Directory of Open Access Journals (Sweden)

    Wang Haitao

    2009-05-01

    Full Text Available Fe-Cr-Ni heat resistant alloys with aluminum and silicon addition, alone and in combination, were melted using an intermediate frequency induction furnace with a non-oxidation method. By the oxidation weight gain method, the oxidation resistances of the test alloys were determined at 1,200 ìC for 500 hours. According to the oxidation weight gains, the oxidation kinetic curves were plotted and the functions were regressed by the least squares method. The results show that the oxidation kinetic curves follow the power function of y = axb (a>0, 0oxidation resistance were studied further by analyses using X-ray diffraction (XRD and scanning electron microscope (SEM. It is found that the composite scale compounds of Cr2O3, メ-Al2O3, SiO2 and FeCr2O4, with compact structure and tiny grains, shows complete oxidation resistance at 1,200 ìC. When the composite scale lacks メ-Al2O3 or SiO2, it becomes weak in oxidation resistance with a loose structure. By the criterion of standard Gibbs formation free energy, the model of the nucleation and growth of the composite scale is established. The forming of the composite scale is the result of the competition of being oxidized and reduced between aluminum, silicon and the matrix metal elements of iron, chromium and nickel. The protection of the composite scale is analyzed essentially by electrical conductivity and strength properties.

  15. Method of making bearing materials. [self-lubricating, oxidation resistant composites for high temperature applications

    Science.gov (United States)

    Sliney, H. E. (Inventor)

    1979-01-01

    A method is described for making a composite material which provides low friction surfaces for materials in rolling or sliding contact. The composite material which is self-lubricating and oxidation resistant up to and in excess of about 930 C is comprised of a metal component which lends strength and elasticity to the structure and a fluorine salt component which provides oxidation protection to the metal but may also enhance the lubrication qualities of the composite.

  16. Influence of pre-deformation, sensitization and oxidation in high temperature water on corrosion resistance of AISI 304 stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Lv, Jinlong, E-mail: ljltsinghua@126.com [Beijing Key Laboratory of Fine Ceramics, Institute of Nuclear and New Energy Technology, Tsinghua University, Zhongguancun Street, Haidian District, Beijing 100084 (China); State Key Lab of New Ceramic and Fine Processing, Tsinghua University, Beijing 100084 (China); Liang, Tongxiang [Beijing Key Laboratory of Fine Ceramics, Institute of Nuclear and New Energy Technology, Tsinghua University, Zhongguancun Street, Haidian District, Beijing 100084 (China); State Key Lab of New Ceramic and Fine Processing, Tsinghua University, Beijing 100084 (China); Luo, Hongyun [Key Laboratory of Aerospace Materials and Performance (Ministry of Education), School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Xueyuan Road 37, Beijing 100191 (China)

    2016-12-01

    Highlights: • The pre-strain accelerated desensitization and sensitization for austenitic stainless steels. • Low temperature sensitization (carbide precipitation) induced α′-martensite. • The sensitization level could affect directly corrosion resistance of the oxide film. - Abstract: The effects of pre-deformation on sensitization of AISI 304 stainless steel were investigated by the double loop electrochemical potentiokinetic reactivation test. The effects of pre-deformation and sensitization on high temperature oxidized film formed in high temperature water were analyzed by a XRD and SEM. The electrochemical impedance spectroscopy at room temperature was used to study corrosion resistance of oxidized film. The point defect density of oxidized film was calculated by Mott–Schottky plots. The results showed that the value of the degree of sensitization first decreased and then slight increased with the increasing of engineering strain. Moreover, low temperature promoted to form sensitization induced “secondary” α′-martensite. The sample with 20% engineering strain had higher impedance value than other samples. The result was supported by further Mott–Schottky experiments. Considering increased α′-martensite with the increasing of strain, the results of the impedance were more consistent with values of the degree of sensitization.

  17. Resistance to High-Temperature Oxidation and Wear of Various Ferrous Alloys Used in Rolling Mills

    Science.gov (United States)

    Delaunois, Fabienne; Stanciu, Victor Ioan; Sinnaeve, Mario

    2018-01-01

    Various materials are commonly used to manufacture work rolls for hot rolling mills, such as ICDP (Indefinite Chill Double Pour) cast irons, high-chromium white cast irons, and high speed steels (HSS). Various chemical compositions and microstructures are studied in order to optimize the in-use behavior of those grades of rolls. In this paper, six grades of ferrous alloys (an ICDP cast iron; an ICDP cast iron enriched in vanadium, niobium, and molybdenum; a HSS; a graphitic HSS; a high-chromium white cast iron (Hi-Cr); and a niobium-molybdenum-doped high-chromium white cast iron) were investigated. High-temperature oxidation tests with gravimetric means at 575 °C in water vapor atmosphere and sliding wear tests were carried out. The oxidation kinetics was followed during oxidation test. The microstructure was observed by optical and scanning electron microscopies. The oxides formed on the surface of the samples were analyzed by XRD and EDS. The thickness of the oxide scales and the mass gain were measured after oxidation test. The results showed that the behavior of all the grades differed. The oxide scale of HSS and HSS-G grades was fine and their friction coefficient was low. The weight gain after oxidation test of HSS was high. Hi-Cr and M-Hi-Cr grades presented highly porous oxide layer and an important increase of the friction coefficient during wear test. ICDP and M-ICDP had intermediate behavior.

  18. Radiation Tolerance of Controlled Fusion Welds in High Temperature Oxidation Resistant FeCrAl Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Gussev, Maxim N. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Field, Kevin G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-08-01

    High temperature oxidation resistant iron-chromium-aluminum (FeCrAl) alloys are candidate alloys for nuclear applications due to their exceptional performance during off-normal conditions such as a loss-of-coolant accident (LOCA) compared to currently deployed zirconium-based claddings [1]. A series of studies have been completed to determine the weldability of the FeCrAl alloy class and investigate the weldment performance in the as-received (non-irradiated) state [2,3]. These initial studies have shown the general effects of composition and microstructure on the weldability of FeCrAl alloys. Given this, limited details on the radiation tolerance of FeCrAl alloys and their weldments exist. Here, the highest priority candidate FeCrAl alloys and their weldments have been investigated after irradiation to enable a better understanding of FeCrAl alloy weldment performance within a high-intensity neutron field. The alloys examined include C35M (Fe-13%Cr-5% Al) and variants with aluminum (+2%) or titanium carbide (+1%) additions. Two different sub-sized tensile geometries, SS-J type and SS-2E (or SS-mini), were neutron irradiated in the High Flux Isotope Reactor to 1.8-1.9 displacements per atom (dpa) in the temperature range of 195°C to 559°C. Post irradiation examination of the candidate alloys was completed and included uniaxial tensile tests coupled with digital image correlation (DIC), scanning electron microscopy-electron back scattered diffraction analysis (SEM-EBSD), and SEM-based fractography. In addition to weldment testing, non-welded parent material was examined as a direct comparison between welded and non-welded specimen performance. Both welded and non-welded specimens showed a high degree of radiation-induced hardening near irradiation temperatures of 200°C, moderate radiation-induced hardening near temperatures of 360°C, and almost no radiation-induced hardening at elevated temperatures near 550°C. Additionally, low-temperature irradiations showed

  19. Temperature-time dependent transmittance, sheet resistance and bonding energy of reduced graphene oxide on soda lime glass

    Science.gov (United States)

    Kumar, Raj; Kumar, R. Manoj; Bera, Parthasarathi; Ariharan, S.; Lahiri, Debrupa; Lahiri, Indranil

    2017-12-01

    Reduced graphene oxide coated soda lime glass can act as an alternative transparent/conducting electrode for many opto-electronic applications. However, bonding between the deposited reduced graphene oxide film and the glass substrate is important for achieving better stability of the coating and an extended device lifetime. In the present study, delamination energy of reduced graphene oxide on soda lime glass was quantified by using nanoscratch technique. Graphene oxide was deposited on soda lime glass by dip coating technique and was thermally reduced at different temperatures (100 °C, 200 °C, 300 °C, 400 °C and 500 °C) and treatment time (2 h, 3 h, 4 h, 5 h and 10 h) in Ar (95%) with H2 (5%) atmosphere. An inverse behavior of delamination energy with temperature and treatment time was observed, which could be correlated with the removal of oxygen functional groups. Sheet resistance of the film demonstrated a steady decay with increasing temperature and treatment time. Functional groups attached to the graphene planes have more influence on conductivity than groups attached to the edges. Removal of functional groups could also be related to optical transmittance of the samples. Knowledge generated in this study with respect to delamination energy, sheet resistance and optical transmittance could be extensively used for various opto-electronic applications.

  20. The Interface Structure of High-Temperature Oxidation-Resistant Aluminum-Based Coatings on Titanium Billet Surface

    Science.gov (United States)

    Xu, Zhefeng; Rong, Ju; Yu, Xiaohua; Kun, Meng; Zhan, Zhaolin; Wang, Xiao; Zhang, Yannan

    2017-10-01

    A new type of high-temperature oxidation-resistant aluminum-based coating, on a titanium billet surface, was fabricated by the cold spray method, at a high temperature of 1050°C, for 8 h, under atmospheric pressure. The microstructure of the exposed surface was analyzed via optical microscopy, the microstructure of the coating and elemental diffusion was analyzed via field emission scanning electron microscopy, and the interfacial phases were identified via x-ray diffraction. The Ti-Al binary phase diagram and Gibbs free energy of the stable phase were calculated by Thermo-calc. The results revealed that good oxidation resistant 50-μm-thick coatings were successfully obtained after 8 h at 1050°C. Two layers were obtained after the coating process: an Al2O3 oxidation layer and a TiAl3 transition layer on the Ti-based substrate. The large and brittle Al2O3 grains on the surface, which can be easily spalled off from the surface after thermal processing, protected the substrate against oxidation during processing. In addition, the thermodynamic calculation results were in good agreement with the experimental data.

  1. Temperature induced complementary switching in titanium oxide resistive random access memory

    Energy Technology Data Exchange (ETDEWEB)

    Panda, D., E-mail: dpanda@nist.edu [Department of Electronics Engineering, National Institute of Science and Technology, Berhampur, Odisha 761008 (India); Department of Electronics Engineering and Institute of Electronics, National Chiao Tung University, Hsinchu 30010, Taiwan (China); Simanjuntak, F. M.; Tseng, T.-Y. [Department of Electronics Engineering and Institute of Electronics, National Chiao Tung University, Hsinchu 30010, Taiwan (China)

    2016-07-15

    On the way towards high memory density and computer performance, a considerable development in energy efficiency represents the foremost aspiration in future information technology. Complementary resistive switch consists of two antiserial resistive switching memory (RRAM) elements and allows for the construction of large passive crossbar arrays by solving the sneak path problem in combination with a drastic reduction of the power consumption. Here we present a titanium oxide based complementary RRAM (CRRAM) device with Pt top and TiN bottom electrode. A subsequent post metal annealing at 400°C induces CRRAM. Forming voltage of 4.3 V is required for this device to initiate switching process. The same device also exhibiting bipolar switching at lower compliance current, Ic <50 μA. The CRRAM device have high reliabilities. Formation of intermediate titanium oxi-nitride layer is confirmed from the cross-sectional HRTEM analysis. The origin of complementary switching mechanism have been discussed with AES, HRTEM analysis and schematic diagram. This paper provides valuable data along with analysis on the origin of CRRAM for the application in nanoscale devices.

  2. Improvement of low temperature oxidation resistance in MoSi{sub 2}-oxides composites; Sankabutsu no fukugoka ni yoru MoSi{sub 2} zairyo no teion sanka tokusei no kaizen

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, W.; Uchiyama, T. [Riken Corp., Saitama (Japan)

    1999-11-15

    MoSi{sub 2}-oxides composites using fine aluminosilicate powder (< 0.2{mu}m) have demonstrated excellent low temperature oxidation resistance and thermal shock resistance. These properties strongly depend on microstructural morphology and are obtained in composites that network-structures of both phases of MoSi{sub 2} and oxides are developed, i.e., in composites with oxides of 20 {approx} 40 vol. %. When one phase is independently dispersed in the other phase, on the other hand, problems of low temperature oxidation and thermal shock occur. The low temperature oxidation problem occurs in the composites with oxides less than 15 vol. % and the thermal shock problem occurs in the composites with oxides more than 50 vol. %. These results will contribute to material design approaches for high temperature structural applications of MoSi{sub 2}. (author)

  3. Low-temperature biosynthesis of fluorescent semiconductor nanoparticles (CdS) by oxidative stress resistant Antarctic bacteria.

    Science.gov (United States)

    Gallardo, C; Monrás, J P; Plaza, D O; Collao, B; Saona, L A; Durán-Toro, V; Venegas, F A; Soto, C; Ulloa, G; Vásquez, C C; Bravo, D; Pérez-Donoso, J M

    2014-10-10

    Bacterial biosynthesis of nanoparticles represents a green alternative for the production of nanostructures with novel properties. Recently, the importance of antioxidant molecules on the biosynthesis of semiconductor fluorescent nanoparticles (quantum dots, QDs) by mesophilic bacteria was reported. The objective of this work was the isolation of psychrotolerant, oxidative stress-resistant bacteria from Antarctica to determine their ability for biosynthesizing CdS QDs at low temperatures. QDs biosynthesis at 15 °C was evaluated by determining their spectroscopic properties after exposing oxidative-stress resistant isolates identified as Pseudomonas spp. to Cd(2+) salts. To characterize the QDs biosynthetic process, the effect of metal exposure on bacterial fluorescence was determined at different times. Time-dependent changes in fluorescence color (green to red), characteristic of QDs, were observed. Electron microscopy analysis of fluorescent cells revealed that biosynthesized nanometric structures localize at the cell periphery. QDs were purified from the bacterial isolates and their fluorescence properties were characterized. Emission spectra displayed classical CdS peaks when excited with UV light. Thiol content, peroxidase activity, lipopolysaccharide synthesis, metabolic profiles and sulfide generation were determined in QDs-producing isolates. No relationship between QDs production and cellular thiol content or peroxidase activity was found. However, sulfide production enhanced CdS QDs biosynthesis. In this work, the use of Antarctic psychrotolerant Pseudomonas spp. for QDs biosynthesis at low temperature is reported for the first time. Copyright © 2014 Elsevier B.V. All rights reserved.

  4. High-temperature Corrosion Resistance of Composite Coating Prepared by Micro-arc Oxidation Combined with Pack Cementation Aluminizing

    Directory of Open Access Journals (Sweden)

    HUANG Zu-jiang

    2018-01-01

    Full Text Available Al2O3 ceramic film was obtained by micro-arc oxidation (MAO process on Al/C103 specimen, which was prepared by pack cementation aluminizing technology on C103 niobium alloy. With the aid of XRD and SEM equipped with EDS, chemical compositions and microstructures of the composite coatings before and after high-temperature corrosion were analyzed. The behavior and mechanism of the composite coatings in high-temperature oxidation and hot corrosion were also investigated. The results indicate that oxidation mass gain at 1000℃ for 10h of the Al/C103 specimen is 6.98mg/cm2, and it is 2.89mg/cm2 of the MAO/Al/C103 specimen. However, the mass gain of MAO/Al/C103 specimen (57.52mg/cm2 is higher than that of Al/C103 specimen (28.08mg/cm2 after oxidation 20h. After hot corrosion in 75%Na2SO4 and 25%NaCl at 900℃ for 50h, the mass gain of Al/C103 and MAO/Al/C103 specimens are 70.54mg/cm2 and 55.71mg/cm2 respectively, Al2O3 and perovskite NaNbO3 phases are formed on the surface; the diffusion of molten salt is suppressed, due to part of NaNbO3 accumulated in the MAO micropores. Therefore, MAO/Al/C103 specimen exhibits better hot corrosion resistance.

  5. A Very Low Dark Current Temperature-Resistant, Wide Dynamic Range, Complementary Metal Oxide Semiconductor Image Sensor

    Science.gov (United States)

    Mizobuchi, Koichi; Adachi, Satoru; Tejada, Jose; Oshikubo, Hiromichi; Akahane, Nana; Sugawa, Shigetoshi

    2008-07-01

    A very low dark current (VLDC) temperature-resistant approach which best suits a wide dynamic range (WDR) complementary metal oxide semiconductor (CMOS) image sensor with a lateral over-flow integration capacitor (LOFIC) has been developed. By implementing a low electric field photodiode without a trade-off of full well-capacity, reduced plasma damage, re-crystallization, and termination of silicon-silicon dioxide interface states in the front end of line and back end of line (FEOL and BEOL) in a 0.18 µm, two polycrystalline silicon, three metal (2P3M) process, the dark current is reduced to 11 e-/s/pixel (0.35 e-/s/µm2: pixel area normalized) at 60 °C, which is the lowest value ever reported. For further robustness at low and high temperatures, 1/3-in., 5.6-µm pitch, 800×600 pixel sensor chips with low noise readout circuits designed for a signal and noise hold circuit and a programmable gain amplifier (PGA) have also been deposited with an inorganic cap layer on a micro-lens and covered with a metal hermetically sealed package assembly. Image sensing performance results in 2.4 e-rms temporal noise and 100 dB dynamic range (DR) with 237 ke- full well-capacity. The operating temperature range is extended from -40 to 85 °C while retaining good image quality.

  6. Improved oxidation resistance of ferritic steels with LSM coating for high temperature electrochemical applications

    DEFF Research Database (Denmark)

    Palcut, Marián; Mikkelsen, Lars; Neufeld, Kai

    2012-01-01

    % H2O) and oxygen and corrosion kinetics monitored by mass increase of the materials over time. The oxide scale microstructure and chemical composition are investigated by scanning electron microscopy/energy-dispersive spectroscopy. The kinetic data obey a parabolic rate law. The results show...

  7. Improvement of the electrochromic response of a low-temperature sintered dye-modified porous electrode using low-resistivity indium tin oxide nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, Yuichi, E-mail: yuichi.watanabe@aist.go.jp; Suemori, Kouji; Hoshino, Satoshi [Flexible Electronics Research Center, National Institute of Advanced Industrial Science and Technology, 1-1-1 Higashi, Tsukuba, Ibaraki 305-8565 (Japan)

    2016-06-15

    An indium tin oxide (ITO) nanoparticle-based porous electrode sintered at low temperatures was investigated as a transparent electrode for electrochromic displays (ECDs). The electrochromic (EC) response of the dye-modified ITO porous electrode sintered at 150 °C, which exhibited a generally low resistivity, was markedly superior to that of a conventional dye-modified TiO{sub 2} porous electrode sintered at the same temperature. Moreover, the EC characteristics of the dye-modified ITO porous electrode sintered at 150 °C were better than those of the high-temperature (450 °C) sintered conventional dye-modified TiO{sub 2} porous electrode. These improvements in the EC characteristics of the dye-modified ITO porous electrode are attributed to its lower resistivity than that of the TiO{sub 2} porous electrodes. In addition to its sufficiently low resistivity attained under the sintering conditions required for flexible ECD applications, the ITO porous film had superior visible-light transparency and dye adsorption capabilities. We conclude that the process temperature, resistivity, optical transmittance, and dye adsorption capability of the ITO porous electrode make it a promising transparent porous electrode for flexible ECD applications.

  8. H2O2mediates ALA-induced glutathione and ascorbate accumulation in the perception and resistance to oxidative stress in Solanum lycopersicum at low temperatures.

    Science.gov (United States)

    Liu, Tao; Hu, Xiaohui; Zhang, Jiao; Zhang, Junheng; Du, Qingjie; Li, Jianming

    2018-02-15

    Low temperature is a crucial factor influencing plant growth and development. The chlorophyll precursor, 5-aminolevulinic acid (ALA) is widely used to improve plant cold tolerance. However, the interaction between H 2 O 2 and cellular redox signaling involved in ALA-induced resistance to low temperature stress in plants remains largely unknown. Here, the roles of ALA in perceiving and regulating low temperature-induced oxidative stress in tomato plants, together with the roles of H 2 O 2 and cellular redox states, were characterized. Low concentrations (10-25 mg·L - 1 ) of ALA enhanced low temperature-induced oxidative stress tolerance of tomato seedlings. The most effective concentration was 25 mg·L - 1 , which markedly increased the ratio of reduced glutathione and ascorbate (GSH and AsA), and enhanced the activities of superoxide dismutase, catalase, ascorbate peroxidase, dehydroascorbate reductase, and glutathione reductase. Furthermore, gene expression of respiratory burst oxidase homolog1 and H 2 O 2 content were upregulated with ALA treatment under normal conditions. Treatment with exogenous H 2 O 2 , GSH, and AsA also induced plant tolerance to oxidative stress at low temperatures, while inhibition of GSH and AsA syntheses significantly decreased H 2 O 2 -induced oxidative stress tolerance. Meanwhile, scavenging or inhibition of H 2 O 2 production weakened, but did not eliminate, GSH- or AsA- induced tomato plant tolerance to oxidative stress at low temperatures. Appropriate concentrations of ALA alleviated the low temperature-induced oxidative stress in tomato plants via an antioxidant system. The most effective concentration was 25 mg·L - 1 . The results showed that H 2 O 2 induced by exogenous ALA under normal conditions is crucial and may be the initial step for perception and signaling transmission, which then improves the ratio of GSH and AsA. GSH and AsA may then interact with H 2 O 2 signaling, resulting in enhanced antioxidant capacity

  9. High-Temperature Oxidation-Resistant and Low Coefficient of Thermal Expansion NiAl-Base Bond Coat Developed for a Turbine Blade Application

    Science.gov (United States)

    2003-01-01

    Many critical gas turbine engine components are currently made from Ni-base superalloys that are coated with a thermal barrier coating (TBC). The TBC consists of a ZrO2-based top coat and a bond coat that is used to enhance the bonding between the superalloy substrate and the top coat. MCrAlY alloys (CoCrAlY and NiCrAlY) are currently used as bond coats and are chosen for their very good oxidation resistance. TBC life is frequently limited by the oxidation resistance of the bond coat, along with a thermal expansion mismatch between the metallic bond coat and the ceramic top coat. The aim of this investigation at the NASA Glenn Research Center was to develop a new longer life, higher temperature bond coat by improving both the oxidation resistance and the thermal expansion characteristics of the bond coat. Nickel aluminide (NiAl) has excellent high-temperature oxidation resistance and can sustain a protective Al2O3 scale to longer times and higher temperatures in comparison to MCrAlY alloys. Cryomilling of NiAl results in aluminum nitride (AlN) formation that reduces the coefficient of thermal expansion (CTE) of the alloy and enhances creep strength. Thus, additions of cryomilled NiAl-AlN to CoCrAlY were examined as a potential bond coat. In this work, the composite alloy was investigated as a stand-alone substrate to demonstrate its feasibility prior to actual use as a coating. About 85 percent of prealloyed NiAl and 15 percent of standard commercial CoCrAlY alloys were mixed and cryomilled in an attritor with stainless steel balls used as grinding media. The milling was carried out in the presence of liquid nitrogen. The milled powder was consolidated by hot extrusion or by hot isostatic pressing. From the consolidated material, oxidation coupons, four-point bend, CTE, and tensile specimens were machined. The CTE measurements were made between room temperature and 1000 C in an argon atmosphere. It is shown that the CTE of the NiAl-AlN-CoCrAlY composite bond coat

  10. History of Resistance Welding Oxide Dispersion Strengthened Cladding and other High Temperature Materials at Center for Advanced Energy Studies

    Energy Technology Data Exchange (ETDEWEB)

    Larry Zirker; Nathan Jerred; Dr. Indrajit Charit; James Cole

    2012-03-01

    Research proposal 08-1079, 'A Comparative Study of Welded ODS Cladding Materials for AFCI/GNEP,' was funded in 2008 under an Advanced Fuel Cycle Initiative (AFCI) Research and Development Funding Opportunity, number DE-PS07-08ID14906. Th proposal sought to conduct research on joining oxide dispersion strengthen (ODS) tubing material to a solid end plug. This document summarizes the scientific and technical progress achieved during the project, which ran from 2008 to 2011.

  11. Oxidation, carburization and/or sulfidation resistant iron aluminide alloy

    Science.gov (United States)

    Sikka, Vinod K.; Deevi, Seetharama C.; Fleischhauer, Grier S.; Hajaligol, Mohammad R.; Lilly, Jr., A. Clifton

    2003-08-19

    The invention relates generally to aluminum containing iron-base alloys useful as electrical resistance heating elements. The aluminum containing iron-base alloys have improved room temperature ductility, electrical resistivity, cyclic fatigue resistance, high temperature oxidation resistance, low and high temperature strength, and/or resistance to high temperature sagging. The alloy has an entirely ferritic microstructure which is free of austenite and includes, in weight %, over 4% Al, .ltoreq.1% Cr and either .gtoreq.0.05% Zr or Zro.sub.2 stringers extending perpendicular to an exposed surface of the heating element or .gtoreq.0.1% oxide dispersoid particles. The alloy can contain 14-32% Al, .ltoreq.2% Ti, .ltoreq.2% Mo, .ltoreq.1% Zr, .ltoreq.1% C, .ltoreq.0.1% B. .ltoreq.30% oxide dispersoid and/or electrically insulating or electrically conductive covalent ceramic particles, .ltoreq.1% rare earth metal, .ltoreq.1% oxygen, .ltoreq.3% Cu, balance Fe.

  12. Oxidation resistant high creep strength austenitic stainless steel

    Science.gov (United States)

    Brady, Michael P.; Pint, Bruce A.; Liu, Chain-Tsuan; Maziasz, Philip J.; Yamamoto, Yukinori; Lu, Zhao P.

    2010-06-29

    An austenitic stainless steel displaying high temperature oxidation and creep resistance has a composition that includes in weight percent 15 to 21 Ni, 10 to 15 Cr, 2 to 3.5 Al, 0.1 to 1 Nb, and 0.05 to 0.15 C, and that is free of or has very low levels of N, Ti and V. The alloy forms an external continuous alumina protective scale to provide a high oxidation resistance at temperatures of 700 to 800.degree. C. and forms NbC nanocarbides and a stable essentially single phase fcc austenitic matrix microstructure to give high strength and high creep resistance at these temperatures.

  13. Effects of Oxidation on Oxidation-Resistant Graphite

    Energy Technology Data Exchange (ETDEWEB)

    Windes, William [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smith, Rebecca [Idaho National Lab. (INL), Idaho Falls, ID (United States); Carroll, Mark [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    The Advanced Reactor Technology (ART) Graphite Research and Development Program is investigating doped nuclear graphite grades that exhibit oxidation resistance through the formation of protective oxides on the surface of the graphite material. In the unlikely event of an oxygen ingress accident, graphite components within the VHTR core region are anticipated to oxidize so long as the oxygen continues to enter the hot core region and the core temperatures remain above 400°C. For the most serious air-ingress accident which persists over several hours or days the continued oxidation can result in significant structural damage to the core. Reducing the oxidation rate of the graphite core material during any air-ingress accident would mitigate the structural effects and keep the core intact. Previous air oxidation testing of nuclear-grade graphite doped with varying levels of boron-carbide (B4C) at a nominal 739°C was conducted for a limited number of doped specimens demonstrating a dramatic reduction in oxidation rate for the boronated graphite grade. This report summarizes the conclusions from this small scoping study by determining the effects of oxidation on the mechanical strength resulting from oxidation of boronated and unboronated graphite to a 10% mass loss level. While the B4C additive did reduce mechanical strength loss during oxidation, adding B4C dopants to a level of 3.5% or more reduced the as-fabricated compressive strength nearly 50%. This effectively minimized any benefits realized from the protective film formed on the boronated grades. Future work to infuse different graphite grades with silicon- and boron-doped material as a post-machining conditioning step for nuclear components is discussed as a potential solution for these challenges in this report.

  14. Oxidation resistance of selected mechanical carbons at 650 deg C in dry flowing air

    Science.gov (United States)

    Allen, G. P.; Wisander, D. W.

    1973-01-01

    Oxidation experiments were conducted with several experimental mechanical carbons at 650 C in air flowing at 28 cu cm/sec (STP). Experiments indicate that boron carbide addition and zinc phosphate treatment definitely improved oxidation resistance. Impregnation with coal tar pitch before final graphitization had some beneficial effect on oxidation resistance and it markedly improved flexure strength and hardness. Graphitization temperature alone did not affect oxidation resistance, but with enough added boron carbide the oxidation resistance was increased although the hardness greatly decreased.

  15. Studies on broad spectrum corrosion resistant oxide coatings

    Indian Academy of Sciences (India)

    The corrosion resistant oxide coatings, developed and applied by the conventional vitreous enamelling techniques, showed superior resistance to a range of mineral acids at various strengths and temperatures, alkaline solutions, boiling water and chrome plating solutions. These coatings possess considerable abrasion ...

  16. On High-Temperature Materials: A Case on Creep and Oxidation of a Fully Austenitic Heat-Resistant Superalloy Stainless Steel Sheet

    Directory of Open Access Journals (Sweden)

    A. Kanni Raj

    2013-01-01

    Full Text Available The creep behavior of AISI 310S stainless steel taken from SAIL’s Salem stainless steel plant has been investigated by constant load tensile creep test at the temperatures of 973, 1023, and 1073 K and loads of 66.6, 74.8, 86.6, and 94.8 MPa. It exhibits steady-state creep behavior in most test conditions. The double logarithm plot of rupture life and applied stress yielded straight lines at all the three test temperatures indicating that power-law creep due to dislocation climb is the operating mechanism of creep deformation. Linear relationship was obtained for plots of logarithm of rupture life against inverse temperature obeying Arrhenius type of temperature dependence with activation energy of 340 kJ/mol. The stress-rupture data yielded a master curve of Larson-Miller parameter. The plot of Monkman-Grant relationship is typical indicating that rupture is controlled by growth of grain boundary cavities. The metallographic examination of crept samples revealed formation of grain boundary voids and cracks leading to intergranular creep fracture. Deformation twins and carbide precipitates were also observed. Oxidation tests were also carried out isothermally at 973 K, 1023 K, and 1073 K in dry air. The plots of mass gain versus square root time were linear at all the three test temperatures obeying parabolic kinetics of oxidation. It was found that scales are well adherent to the substrate. The plot of parabolic rate constant and inverse temperature was linear giving an activation energy value of 210 kJ/mol. The metallographic examination of an oxidized sample reveals duplex types of scales. Finally, rupture properties are compared with that of AISI 600 iron-based superalloy and oxidation weight gain analysis with surface nanocrystalline AISI 310S stainless steel to analyze quantitatively its behavior.

  17. Oxidation resistant carbon-carbon composite for Space Shuttle application.

    Science.gov (United States)

    Rogers, D. C.; Seeger, J. W.; Shuford, D. M.

    1973-01-01

    An oxidation resistant carbon-carbon composite has been developed for use on the NASA Space Shuttle Orbiter Vehicle which can function on the high temperature surfaces to satisfy the 100 mission reuse capability requirement. This paper describes the design requirements, materials and processes developed, and the successful testing of simulated full-scale prototype hardware. Materials considerations are illustrated, including strength and oxidation testing, along with physical property determinations, characterizing the material over the predicted temperature range of use.

  18. Impact of Gate Poly Depletion on Evaluation of Channel Temperature in Silicon-on-Insulator Metal-Oxide-Semiconductor Field-Effect Transistors with Four-Point Gate Resistance Measurement Method

    Science.gov (United States)

    Beppu, Nobuyasu; Takahashi, Tsunaki; Ohashi, Teruyuki; Uchida, Ken

    2012-02-01

    Self-heating effects (SHEs) in silicon-on-insulator (SOI) metal-oxide-semiconductor field-effect transistors (MOSFETs) is evaluated and an accurate measurement method for device temperature is developed using the four-point gate resistance measurement method. Although the method of using a polysilicon gate as a temperature sensor was proposed more than 20 years ago, the accuracy of the technique has not been checked. In this work, it is demonstrated that the channel temperature estimated by the conventional method is not accurate under some special conditions. The measurements of gate resistance under various biases revealed that the depletion of the polysilicon gate had a significant impact on gate resistance. We propose a method of accurately evaluating channel temperature, where the effect of poly depletion is successfully subtracted. At an input power of 5 mW the increase in channel temperature is approximately 30 K, corresponding to a thermal resistance of 6.0 K W-1 m-1.

  19. Microstructure and high temperature oxidation resistance of in-situ synthesized TiN/Ti{sub 3}Al intermetallic composite coatings on Ti6Al4V alloy by laser cladding process

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Hongxi, E-mail: piiiliuhx@sina.com; Zhang, Xiaowei; Jiang, Yehua; Zhou, Rong

    2016-06-15

    High temperature anti-oxidation TiN/Ti{sub 3}Al intermetallic composite coatings were fabricated with the powder and AlN powder on Ti6Al4V titanium alloy surface by 6 kW transverse-flow CO{sub 2} laser apparatus. The chemical composition, morphology and microstructure of the TiN/Ti{sub 3}Al composite coatings were characterized by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectrometer (EDS). In order to evaluate the high temperature oxidation resistance of TiN/Ti{sub 3}Al coating, the isothermal oxidation test was performed in a high temperature resistance furnace at 600 °C and 800 °C, respectively. The result shows that the composite coating has a rapidly solidified fine microstructure consisting of TiN primary phase (granular-like, flake-like or dendrites), with an even distribution in Ti{sub 3}Al matrix. It indicates that a physical and chemical reaction between Ti powder and AlN powder has completely occurred under the laser irradiation condition. In addition, the microhardness of the TiN/Ti3Al intermetallic composite coating is 3.4 times higher than that of the Ti6Al4V alloy substrate and reaches 844 HV{sub 0.2}. The high temperature oxidation behavior test reveals that the high temperature oxidation resistance of TiN/Ti{sub 3}Al composite coating is much better than that of titanium alloy substrate. The excellent high temperature oxidation resistance of TiN/Ti{sub 3}Al intermetallic composite coating is attributed to the formation of reinforced phases TiN, Al{sub 2}O{sub 3} and TiO{sub 2}. The laser cladding TiN/Ti{sub 3}Al intermetallic composite coating is anticipated to be a promising high temperature oxidation resistance coating for Ti6Al4V alloy. - Highlights: • In-situ TiN/Ti{sub 3}Al composite coating was synthesized on Ti6Al4V alloy by laser cladding. • The influence of Ti and AlN molar ratio on the microstructure of the coating was studied. • The TiN/Ti{sub 3}Al intermetallic

  20. "A New Class of Creep Resistant Oxide/Oxide Ceramic Matrix Composites"

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Mohit Jain, Dr. Ganesh Skandan, Prof. Roger Cannon, Rutgers University

    2007-03-30

    Despite recent progress in the development of SiC-SiC ceramic matrix composites (CMCs), their application in industrial gas turbines for distributed energy (DE) systems has been limited. The poor oxidation resistance of the non-oxide ceramics warrants the use of envrionmental barrier coatings (EBCs), which in turn lead to issues pertaining to life expectancy of the coatings. On the other hand, oxide/oxide CMCs are potential replacements, but their use has been limited until now due to the poor creep resistance at high temperatures, particularly above 1200 oC: the lack of a creep resistant matrix has been a major limiting factor. Using yttrium aluminum garnet (YAG) as the matrix material system, we have advanced the state-of-the-art in oxide/oxide CMCs by introducing innovations in both the structure and composition of the matrix material, thereby leading to high temperature matrix creep properties not achieved until now. An array of YAG-based powders with a unique set of particle characteristics were produced in-house and sintered to full density and compressive creep data was obtained. Aided in part by the composition and the microstructure, the creep rates were found to be two orders of magnitude smaller than the most creep resistant oxide fiber available commercially. Even after accounting for porosity and a smaller matrix grain size in a practical CMC component, the YAG-based matrix material was found to creep slower than the most creep resistant oxide fiber available commercially.

  1. Molybdenum Disilicide Oxidation Kinetics in High Temperature Steam

    Energy Technology Data Exchange (ETDEWEB)

    Wood, Elizabeth Sooby [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Parker, Stephen Scott [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Nelson, Andrew Thomas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-09-07

    The Fuel Cycle Research and Development program’s Advanced Fuels Campaign is currently supporting a range of experimental efforts aimed at the development and qualification of ‘accident tolerant’ nuclear fuel forms. One route to enhance the accident tolerance of nuclear fuel is to replace the zirconium alloy cladding, which is prone to rapid oxidation in steam at elevated temperatures, with a more oxidation-resistant cladding. Several cladding replacement solutions have been envisaged. The cladding can be completely replaced with a more oxidation resistant alloy, a layered approach can be used to optimize the strength, creep resistance, and oxidation tolerance of various materials, or the existing zirconium alloy cladding can be coated with a more oxidation-resistant material. Molybdenum is one candidate cladding material favored due to its high temperature creep resistance. However, it performs poorly under autoclave testing and suffers degradation under high temperature steam oxidation exposure. Development of composite cladding architectures consisting of a molybdenum core shielded by a molybdenum disilicide (MoSi2) coating is hypothesized to improve the performance of a Mo-based cladding system. MoSi2 was identified based on its high temperature oxidation resistance in O2 atmospheres (e.g. air and “wet air”). However, its behavior in H2O is less known. This report presents thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and x-ray diffraction (XRD) results for MoSi2 exposed to 670-1498 K water vapor. Synthetic air (80-20%, Ar-O2) exposures were also performed, and those results are presented here for a comparative analysis. It was determined that MoSi2 displays drastically different oxidation behavior in water vapor than in dry air. In the 670-1498 K temperature range, four distinct behaviors are observed. Parabolic oxidation is exhibited in only 670

  2. Thermoelectric Seebeck effect in oxide-based resistive switching memory.

    Science.gov (United States)

    Wang, Ming; Bi, Chong; Li, Ling; Long, Shibing; Liu, Qi; Lv, Hangbing; Lu, Nianduan; Sun, Pengxiao; Liu, Ming

    2014-08-20

    Reversible resistive switching induced by an electric field in oxide-based resistive switching memory shows a promising application in future information storage and processing. It is believed that there are some local conductive filaments formed and ruptured in the resistive switching process. However, as a fundamental question, how electron transports in the formed conductive filament is still under debate due to the difficulty to directly characterize its physical and electrical properties. Here we investigate the intrinsic electronic transport mechanism in such conductive filament by measuring thermoelectric Seebeck effects. We show that the small-polaron hopping model can well describe the electronic transport process for all resistance states, although the corresponding temperature-dependent resistance behaviours are contrary. Moreover, at low resistance states, we observe a clear semiconductor-metal transition around 150 K. These results provide insight in understanding resistive switching process and establish a basic framework for modelling resistive switching behaviour.

  3. Resistive Switching and Temperature-dependent Transport in HfOx-based Resistive Memory Devices

    Science.gov (United States)

    Kim, Seyoung; Ahn, Chiyui; Gokmen, Tayfun; Dial, Oliver; Ritter, Mark

    2014-03-01

    Resistive switching phenomenon in transition metal oxide materials has been studied intensively as a candidate technology for future non-volatile memory applications and electronic synapse devices. Here, we demonstrate an HfOx-based resistive memory device with rare earth metal contact in which the device resistance can be modulated with applied voltage and current. Repeatable and self-compliance switching as well as high yield and device-to-device uniformity are achieved in our devices. To understand the conduction mechanism, we perform transport measurement in multiple devices at different resistance states (initial, low and high resistance states) by probing current as a function of applied voltage at temperatures from 40K to 350K. We find that temperature insensitive tunneling conduction dominates at low temperature, while thermally activated conduction is observed at high temperature. Trap-assisted tunneling and Poole-Frenkel mechanisms are accounted for the characteristics found in different regimes.

  4. Contact resistance and adhesion characteristics of oxidized tantalum nitride mirors

    Energy Technology Data Exchange (ETDEWEB)

    Kramer, D.K.

    1975-11-01

    Oxidation of tantalum nitride resistor films used in hybrid microcircuits is an unavoidable phenomenon known to affect interfacial properties between resistor and conductor layers. At room temperature, oxide thickness increases with time at an unknown rate; therefore, a three-day limitation between Ta/sub 2/N and Cr/Au conductor deposition is presently specified for hybrid microcircuits. The effects of Ta/sub 2/N aging on resistor-conductor contact resistance and conductor bondability were evaluated. Accelerated aging produced oxide layers of various thicknesses which were then correlated to contact resistance. Analytical data and calculations indicate that a 25 percent increase in contact resistance would occur by exposing the Ta/sub 2/N to air for approximately three years at room temperature and pressure prior to metallization. However, little or no change in bondability would be expected.

  5. Molybdenum oxide-base phase change resistive switching material

    Science.gov (United States)

    Ogawa, Yukiko; Shindo, Satoshi; Sutou, Yuji; Koike, Junichi

    2017-10-01

    We investigated the temperature dependence of electrical resistance of a reactively sputtered Mo-oxide film with a composition near MoO3 and found that the sputtered Mo-oxide film shows a large electrical resistance drop of much more than 104-fold at over 350 °C. Such a large drop in electrical resistance was found to be caused by a phase transition from an amorphous state to a crystalline state. It was confirmed that a W/Mo-oxide/W device shows a typical resistive switching effect of a phase change random access memory material and exhibits reversible resistive switching by the application of unidirectional set and reset voltage. The resistance contrast of the device had a large value of about 105-106. Furthermore, the Mo-oxide film showed much better thermal stability in the amorphous state than conventional phase change materials. These results indicate that the Mo-oxide film is a promising oxide-base phase change material for phase change random access memory.

  6. Low Temperature Oxidation of Methane: The Influence of Nitrogen Oxides

    DEFF Research Database (Denmark)

    Bendtsen, Anders Broe; Glarborg, Peter; Dam-Johansen, Kim

    2000-01-01

    An experimental investigation of methane oxidation in the presence of NO and NO2 has been made in an isothermal plug-flow reactor at 750-1250K. The temperature for on-set of oxidation was lowered by 250 K in the presence of NO or NO2 at residence times of 200 ms. At shorter residence times (140 ms......) this enhancement effect is reduced for NO but maintained for NO2. Furthermore two temperature regimes of oxidation separated by an intermediate regime where only little oxidation takes place exist at residence times of 140 ms, if NO is the only nitrogen oxide initially present. The results were explained...

  7. High temperature oxidation of slurry coated interconnect alloys

    DEFF Research Database (Denmark)

    Persson, Åsa Helen

    with this interaction mechanism mainly give a geometrical protection against oxidation by blocking oxygen access at the surface of the oxide scale. The protecting effect is gradually reduced as the oxide scale grows thicker than the diameter of the coating particles. Interaction mechanism B entails a chemical reaction.......85Sr0.15)CoO3 + 10% Co3O4, LSC, coatings were found to be relatively successful in decreasing the oxidation rate, the chromium content in the outermost part of ii the dense scale, and the electrical resistance in the growing oxide scales when applied onto Crofer 22APU. But, the positive effects......In this project, high temperature oxidation experiments of slurry coated ferritic alloys in atmospheres similar to the atmosphere found at the cathode in an SOFC were conducted. From the observations possible interaction mechanisms between the slurry coatings and the growing oxide scale...

  8. Thermogravimetric study of oxidation of a PdCr alloy used for high-temperature sensors

    Science.gov (United States)

    Boyd, Darwin L.; Zeller, Mary V.

    1994-01-01

    In this study, the oxidation of Pd-13 weight percent Cr, a candidate alloy for high-temperature strain gages, was investigated by thermogravimetry. Although the bulk alloy exhibits linear electrical resistivity versus temperature and stable resistivity at elevated temperatures, problems attributed to oxidation occur when this material is fabricated into strain gages. In this work, isothermal thermogravimetry (TG) was used to study the oxidation kinetics. Results indicate that the oxidation of Pd-13 weight percent Cr was approximately parabolic in time at 600 C but exhibited greater passivation from 700 to 900 C. At 1100 C, the oxidation rate again increased.

  9. One new route to optimize the oxidation resistance of TiC/hastelloy (Ni-based alloy) composites applied for intermediate temperature solid oxide fuel cell interconnect by increasing graphite particle size

    Science.gov (United States)

    Qi, Qian; Liu, Yan; Wang, Lujie; Zhang, Hui; Huang, Jian; Huang, Zhengren

    2017-09-01

    TiC/hastelloy composites with suitable thermal expansion and excellent electrical conductivity are promising candidates for IT-SOFC interconnect. In this paper, the TiC/hastelloy composites are fabricated by in-situ reactive infiltration, and the oxidation resistance of composites is optimized by increasing graphite particle size. Results show that the increase of graphite particles size from 1 μm to 40 μm reduces TiC particle size from 2.68 μm to 2.22 μm by affecting the formation process of TiC. Moreover, the decrease of TiC particles size accelerates the fast formation of dense and continuous TiO2/Cr2O3 oxide layer, which bring down the mass gain (800 °C/100 h) from 2.03 mg cm-2 to 1.18 mg cm-2. Meanwhile, the coefficient of thermal expansion decreases from 11.15 × 10-6 °C-1 to 10.80 × 10-6 °C-1, and electrical conductivity maintains about 5800 S cm-1 at 800 °C. Therefore, the decrease of graphite particle size is one simple and effective route to optimize the oxidation resistance of composites, and meantime keeps suitable thermal expansion and good electrical conductivity.

  10. Silicon Carbide Nanotube Oxidation at High Temperatures

    Science.gov (United States)

    Ahlborg, Nadia; Zhu, Dongming

    2012-01-01

    Silicon Carbide Nanotubes (SiCNTs) have high mechanical strength and also have many potential functional applications. In this study, SiCNTs were investigated for use in strengthening high temperature silicate and oxide materials for high performance ceramic nanocomposites and environmental barrier coating bond coats. The high · temperature oxidation behavior of the nanotubes was of particular interest. The SiCNTs were synthesized by a direct reactive conversion process of multiwall carbon nanotubes and silicon at high temperature. Thermogravimetric analysis (TGA) was used to study the oxidation kinetics of SiCNTs at temperatures ranging from 800degC to1300degC. The specific oxidation mechanisms were also investigated.

  11. Oxidation Resistance of Medium-Carbon Heat-Resistant Cr-Al Steels in Extreme Conditions

    Directory of Open Access Journals (Sweden)

    Mykhail M. Yamshinskij

    2017-10-01

    Full Text Available Background. From the analysis of exploitation of heat-resistant details of thermal power and metallurgical equipment, it was found that the basic characteristic of metallic materials working under extreme conditions is oxidation resistance. However, the choice of materials for work in the conditions of high temperatures and aggressive environments should be made taking into account not only its oxidation resistance but also the possibility of this material to work long time in the conditions of thermal cycling without being damaged, thus thinking about its heat-resistance. Consequently, it is tremendously important to determine the oxidation resistance of iron-based alloys in extreme conditions depending on the presence of main elements – chrome and aluminium – in their content on the basis of study of formation processes on the item surface of high-quality protective oxides films. Objective. The aim of the paper is to establish the selection rules of heat-resistant iron-based alloys for work in extreme conditions depending on temperatures and aggressive environments and to accumulate some information on their oxidation resistance for the creation of a database and development of methodology how to forecast special properties of alloys. Methods. Models with 10 mm in diameter and 20 mm in length were tested in a tubular stove at the temperature of 1200 and 1250 °C during 100 hours. Oxidation resistance was determined by a weight method. Phase composition and structure were explored by modern X-ray structural and metallographic methods. Results. Processes and mechanisms of formation of oxide scale in the conditions of exploitation of items under the temperature 1250 °C in different aggressive environments are established. The optimum boundaries of concentration of basic chemical elements – chrome and aluminium – in heat-resistant alloys for work in extreme conditions depending on temperatures and environments are determined. A database

  12. Influence of oxidation temperature on the oxide scale formation of NiCoCrAl coatings

    Science.gov (United States)

    Sugiarti, E.; Zaini, K. A.; Sundawa, R.; Wang, Y.; Ohnuki, S.; Hayashi, S.

    2017-04-01

    Intermetalic coatings of NiCoCrAl have been successfully developed on low carbon steel substrate to improve oxidation resistance in extreme environments. The influence of oxidation temperature on the oxide scale formation was studied in the temperature range of 600-1000 °C. The measurements were made in air under isothermal oxidation test for 100 h. The surface morphology showed that a cauliflower like structure developed entire the oxide scale of sample oxidized at 800 °C and 1000 °C, while partly distributed on the surface of sample oxidized at 600 °C. The XRD analysis identified Cr2O3 phase predominantly formed on the oxidized sample at 600 °C and meta-stable Al2O3 with several polymorphs crystalline structures: η, δ, θ, κ, and α-Al2O3 at relatively high temperatures, i.e. 800 °C and 1000 °C. A Cross-sectional microstructure showed that complex and porous structures formed on the top surface of 600 °C and 1000 °C samples. In contrast, a very thin oxide scale formed on 800 °C oxidized samples and it appeared to act as a diffusion barrier of oxygen to diffuse inward, hence could increase in the service life of carbon steel substrate.

  13. Effect of pre-oxidation on the oxidation resistance of spinel-coated Fe-Cr ferritic alloy for solid oxide fuel cell applications

    Science.gov (United States)

    Ou, Ding Rong; Cheng, Mojie

    2014-02-01

    Low-temperature-sintered MnCo2O4-MnO2 coatings have been prepared on pre-oxidized SUS430 ferritic alloy by slurry coating. The effect of pre-oxidation treatment before slurry coating is then investigated. Microstructural and electrical characterizations show that 25 h of pre-oxidation at 800 °C could significantly improve the oxidation resistance of the coated alloy and effectively inhibit the increase in area-specific electrical resistance during long-term oxidation. These effects can be explained by the interfacial reactions between the coating and the pre-oxidized alloy during sintering and oxidation tests. Furthermore, this study suggests that the dense reaction layer at the coating-alloy interface could be the key to improving the oxidation resistance of metallic interconnects with low-temperature-sintered spinel coatings.

  14. Electric-field effects in resistive oxides: facts and artifacts

    Directory of Open Access Journals (Sweden)

    Reisner G. M.

    2013-01-01

    Full Text Available Striking non-linear conductivity effects induced by surprisingly low electric-fields in charge-ordered oxides, were reported variously as dielectric breakdown, charge-order collapse, depinning of charge-density-waves or other electronic effects. Our pulsed and d.c. I-V measurements on resistive oxides show that non-linear conductivity of electronic origin at low electric-fields is a rare phenomenon. In the majority of cases we detected no deviations from linearity in pulsed I-V characteristics under fields up to E ~ 500 V/cm. Current-controlled negative-differential-resistance (NDR and hysteresis were found in d.c. measurements at fields that decrease with increasing temperatures, a behavior typical of Joule heating in materials with negative temperature coefficient of resistivity. For the d.c. I-V characteristics of our samples exhibiting NDR, we found a rather unexpected correlation between ρ(Em - the resistivity at maximum field (at the onset of NDR and ρ(E=0 – the ohmic resistivity. The data points for ρ(Em versus ρ(E=0 obtained from such characteristics of 13 samples (8 manganites, 4 nickelates and one multiferroic at various ambient temperatures, plotted together on a log-log scale, follow closely a linear dependence with slope one that spans more than five orders of magnitude. This dependence is reproduced by several simple models.

  15. Creep resistant high temperature martensitic steel

    Energy Technology Data Exchange (ETDEWEB)

    Hawk, Jeffrey A.; Jablonski, Paul D.; Cowen, Christopher J.

    2015-11-13

    The disclosure provides a creep resistant alloy having an overall composition comprised of iron, chromium, molybdenum, carbon, manganese, silicon, nickel, vanadium, niobium, nitrogen, tungsten, cobalt, tantalum, boron, and potentially additional elements. In an embodiment, the creep resistant alloy has a molybdenum equivalent Mo(eq) from 1.475 to 1.700 wt. % and a quantity (C+N) from 0.145 to 0.205. The overall composition ameliorates sources of microstructural instability such as coarsening of M.sub.23C.sub.6 carbides and MX precipitates, and mitigates or eliminates Laves and Z-phase formation. A creep resistant martensitic steel may be fabricated by preparing a melt comprised of the overall composition followed by at least austenizing and tempering. The creep resistant alloy exhibits improved high-temperature creep strength in the temperature environment of around 650.degree. C.

  16. Creep resistant high temperature martensitic steel

    Energy Technology Data Exchange (ETDEWEB)

    Hawk, Jeffrey A.; Jablonski, Paul D.; Cowen, Christopher J.

    2017-01-31

    The disclosure provides a creep resistant alloy having an overall composition comprised of iron, chromium, molybdenum, carbon, manganese, silicon, nickel, vanadium, niobium, nitrogen, tungsten, cobalt, tantalum, boron, copper, and potentially additional elements. In an embodiment, the creep resistant alloy has a molybdenum equivalent Mo(eq) from 1.475 to 1.700 wt. % and a quantity (C+N) from 0.145 to 0.205. The overall composition ameliorates sources of microstructural instability such as coarsening of M.sub.23C.sub.6carbides and MX precipitates, and mitigates or eliminates Laves and Z-phase formation. A creep resistant martensitic steel may be fabricated by preparing a melt comprised of the overall composition followed by at least austenizing and tempering. The creep resistant alloy exhibits improved high-temperature creep strength in the temperature environment of around 650.degree. C.

  17. Microchannel plate resistance at cryogenic temperatures

    CERN Document Server

    Roth, P

    2000-01-01

    The resistance R of a 'low-resistance' microchannel plate (MCP) electron multiplier was measured over the extended temperature range 4-293 K. The ratio R(T)/R(293 K) reached values of 10 sup 2 , 10 sup 3 and 10 sup 6 at temperatures T=59, 40 and 19 K, respectively. These results are interpreted in terms of variable range hopping conduction mechanisms in the reduced lead silicate MCP glass. The results may be important for cryogenic charged particle detection using MCPs, as, for example, in a recent proposal for a quantum computer.

  18. Oxidative Stress Resistance in Deinococcus radiodurans†

    Science.gov (United States)

    Slade, Dea; Radman, Miroslav

    2011-01-01

    Summary: Deinococcus radiodurans is a robust bacterium best known for its capacity to repair massive DNA damage efficiently and accurately. It is extremely resistant to many DNA-damaging agents, including ionizing radiation and UV radiation (100 to 295 nm), desiccation, and mitomycin C, which induce oxidative damage not only to DNA but also to all cellular macromolecules via the production of reactive oxygen species. The extreme resilience of D. radiodurans to oxidative stress is imparted synergistically by an efficient protection of proteins against oxidative stress and an efficient DNA repair mechanism, enhanced by functional redundancies in both systems. D. radiodurans assets for the prevention of and recovery from oxidative stress are extensively reviewed here. Radiation- and desiccation-resistant bacteria such as D. radiodurans have substantially lower protein oxidation levels than do sensitive bacteria but have similar yields of DNA double-strand breaks. These findings challenge the concept of DNA as the primary target of radiation toxicity while advancing protein damage, and the protection of proteins against oxidative damage, as a new paradigm of radiation toxicity and survival. The protection of DNA repair and other proteins against oxidative damage is imparted by enzymatic and nonenzymatic antioxidant defense systems dominated by divalent manganese complexes. Given that oxidative stress caused by the accumulation of reactive oxygen species is associated with aging and cancer, a comprehensive outlook on D. radiodurans strategies of combating oxidative stress may open new avenues for antiaging and anticancer treatments. The study of the antioxidation protection in D. radiodurans is therefore of considerable potential interest for medicine and public health. PMID:21372322

  19. Oxidative stress resistance in Deinococcus radiodurans.

    Science.gov (United States)

    Slade, Dea; Radman, Miroslav

    2011-03-01

    Deinococcus radiodurans is a robust bacterium best known for its capacity to repair massive DNA damage efficiently and accurately. It is extremely resistant to many DNA-damaging agents, including ionizing radiation and UV radiation (100 to 295 nm), desiccation, and mitomycin C, which induce oxidative damage not only to DNA but also to all cellular macromolecules via the production of reactive oxygen species. The extreme resilience of D. radiodurans to oxidative stress is imparted synergistically by an efficient protection of proteins against oxidative stress and an efficient DNA repair mechanism, enhanced by functional redundancies in both systems. D. radiodurans assets for the prevention of and recovery from oxidative stress are extensively reviewed here. Radiation- and desiccation-resistant bacteria such as D. radiodurans have substantially lower protein oxidation levels than do sensitive bacteria but have similar yields of DNA double-strand breaks. These findings challenge the concept of DNA as the primary target of radiation toxicity while advancing protein damage, and the protection of proteins against oxidative damage, as a new paradigm of radiation toxicity and survival. The protection of DNA repair and other proteins against oxidative damage is imparted by enzymatic and nonenzymatic antioxidant defense systems dominated by divalent manganese complexes. Given that oxidative stress caused by the accumulation of reactive oxygen species is associated with aging and cancer, a comprehensive outlook on D. radiodurans strategies of combating oxidative stress may open new avenues for antiaging and anticancer treatments. The study of the antioxidation protection in D. radiodurans is therefore of considerable potential interest for medicine and public health.

  20. High temperature oxidation in boiler environment of chromized steel

    Science.gov (United States)

    Alia, F. F.; Kurniawan, T.; Asmara, Y. P.; Ani, M. H. B.; Nandiyanto, A. B. D.

    2017-10-01

    The demand for increasing efficiency has led to the development and construction of higher operating temperature power plant. This condition may lead to more severe thickness losses in boiler tubes due to excessive corrosion process. Hence, the research to improve the corrosion resistance of the current operated material is needed so that it can be applied for higher temperature application. In this research, the effect of chromizing process on the oxidation behaviour of T91 steel was investigated under steam condition. In order to deposit chromium, mixture of chromium (Cr) powder as master alloy, halide salt (NH4Cl) powder as activator and alumina (Al2O3) powder as inert filler were inserted into alumina retort together with the steel sample and heated inside furnace at 1050°C for ten hours under argon gas environment. Furthermore, for the oxidation process, steels were exposed at 700°C at different oxidation time (6h-24h) under steam condition. From FESEM/EDX analysis, it was found that oxidation rate of pack cemented steel was lower than the un-packed steel. These results show that Cr from chromizing process was able to become reservoir for the formation of Cr2O3 in high temperature steam oxidation, and its existence can be used for a longer oxidation time.

  1. Hydrocarbon oxidation at high temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Warnatz, J.

    1983-11-01

    In this review it is described how, by suitable separation and elimination of unimportant reactions, a mechanism is developed with the aid of the present kinetic data for the elementary reactions involved. This mechanism explains, without fitting, the currently available experimental results for laminar premixed flames of alkanes, alkenes and acetylene. These experimental results are simulated by the solution of the corresponding conservation equations with suitable models describing diffusion and heat conduction in the multicomponent mixture considered. In lean and moderately rich flames the hydrocarbon is attacked by O, H, and OH in the first step. These radicals are produced by the chain-branching steps of the oxyhydrogen reaction. The alkyl radicals formed in this way always decompose to smaller alkyl radicals by fast thermal elimination of alkenes. Only the relatively slow thermal decomposition of the smallest alkyl radicals (CH/sub 3/ and C/sub 2/H/sub 5/) competes with recombination and with oxidation reactions by O atoms and O/sub 2/. This part of the mechanism is rate-controlling in the combustion of alkanes and alkenes, and is therefore the reason for the similarity of all alkane and alkene flames.

  2. Protein Oxidation: Key to Bacterial Desiccation Resistance?

    Energy Technology Data Exchange (ETDEWEB)

    Fredrickson, Jim K.; Li, Shu-Mei W.; Gaidamakova, E.; Matrosova, V.; Zhai, M.; Sulloway, Heather M.; Scholten, Johannes C.; Brown,, Mindy G.; Balkwill, David L.; Daly, Michael J.

    2008-04-01

    For extremely ionizing radiation resistant bacteria, survival has been attributed to protection of proteins from oxidative damage during irradiation, with the result that repair systems survive and function with far greater efficiency during recovery than in sensitive bacteria. Here we examined the relationship between survival of dry-climate soil bacteria and the level of cellular protein oxidation induced by desiccation. Bacteria were isolated from surface soils of the shrub-steppe of the U.S. Department of Energy’s Hanford Site in Washington state. A total of 63 isolates were used for phylogenetic analysis. The majority of isolates were closely related to members of the genus Deinococcus, with Chelatococcus, Methylobacterium and Bosea also among the genera identified. Desiccation-resistant isolates accumulated high intracellular manganese and low iron concentrations compared to sensitive bacteria. In vivo, proteins of desiccation-resistant bacteria were protected from oxidative modifications that introduce carbonyl groups in sensitive bacteria during drying. We present the case that survival of bacteria that inhabit dry-climate soils are highly dependent on mechanisms which limit protein oxidation during dehydration.

  3. Anodes for Solid Oxide Fuel Cells Operating at Low Temperatures

    DEFF Research Database (Denmark)

    Abdul Jabbar, Mohammed Hussain

    . On the other hand, low-temperature operation poses serious challenges to the electrode performance. Effective catalysts, redox stable electrodes with improved microstructures are the prime requisite for the development of efficient SOFC anodes. The performance of Nb-doped SrT iO3 (STN) ceramic anodes......An important issue that has limited the potential of Solid Oxide Fuel Cells (SOFCs) for portable applications is its high operating temperatures (800-1000 ºC). Lowering the operating temperature of SOFCs to 400-600 ºC enable a wider material selection, reduced degradation and increased lifetime...... at 400ºC. The potential of using WO3 ceramic as an alternative anode materials has been explored. The relatively high electrode polarization resistance obtained, 11 Ohm cm2 at 600 ºC, proved the inadequate catalytic activity of this system for hydrogen oxidation. At the end of this thesis...

  4. Room temperature chemical oxidation of delafossite-type oxides

    Energy Technology Data Exchange (ETDEWEB)

    Trari, M.; Toepfer, J.; Doumerc, J.P.; Pouchard, M.; Hagenmuller, P. (Laboratoire de Chimie du Solide du CNRS, Talence (France)); Ammar, A. (Universite Cadi Ayyad, Marrakech (Morocco))

    1994-07-01

    Examination of the delafossite-type structure of CuLaO[sub 2] and CuYO[sub 2] suggests that there is room enough to accommodate intercalated oxide ions and the charge compensation resulting simply from the oxidation of an equivalent amount of Cu[sup +] into Cu[sup 2+]. Reaction with hypohalites in an aqueous solution leads to color change. Evidence of the formation of Cu[sup 2+] is given by TGA, iodometric titration, and magnetic (static and EPR) measurements. The obtained La and Y compounds seem to behave in a different way: Whereas CuLaO[sub 2+x] appears as a single phase, CuYO[sub 2+x] corresponds to a two-phase mixture, with respectively low and high x values, the latter being isostructural with the thermally oxidized compound recently reported. Comparison is stressed between the oxides obtained at higher temperatures.

  5. Improved oxidation-resistant carbon and graphite materials

    Science.gov (United States)

    Muir, H. M.

    1972-01-01

    A variety of silicon-carbide treated carbon and graphite products were prepared, and oxidation and strength properties determined. Carbon and graphite materials used in the preliminary study include fiber, tape, felt, foam, bulk, and laminar configurations. The silicon-carbide treatment used in preparing the oxidation resistant specimens employs either vacuum or ultrasonic impregnation of various silicone-silicon mixtures into the matrix material. The impregnation phase is followed by controlled thermal reaction at which time the silicon carbide is synthesized and takes the form of an integral protective boundary layer. Thickness of the layer ranges from a fraction of a mil to 10 mils, depending on the matrix material and processing parameters. Oxidation resistance of all the silicon-carbide-treated specimens investigated was found to be significantly improved. Mechanical strengths of the laminar composites were also found to be somewhat improved. At room temperature the specific strength of the silicon-carbide treated fibers and tapes was degraded to some extent; however, their relative strengths were significantly increased at elevated temperatures in oxidizing atmosphere.

  6. Oxidative stress resistance in Porphyromonas gingivalis

    Science.gov (United States)

    Henry, Leroy G; McKenzie, Rachelle ME; Robles, Antonette; Fletcher, Hansel M

    2012-01-01

    Porphyromonas gingivalis, a black-pigmented, Gram-negative anaerobe, is an important etiologic agent of periodontal disease. The harsh inflammatory condition of the periodontal pocket implies that this organism has properties that will facilitate its ability to respond and adapt to oxidative stress. Because the stress response in the pathogen is a major determinant of its virulence, a comprehensive understanding of its oxidative stress resistance strategy is vital. We discuss multiple mechanisms and systems that clearly work in synergy to defend and protect P. gingivalis against oxidative damage caused by reactive oxygen species. The involvement of multiple hypothetical proteins and/or proteins of unknown function in this process may imply other unique mechanisms and potential therapeutic targets. PMID:22439726

  7. High-temperature corrosion resistance of ceramics and ceramic coatings

    Energy Technology Data Exchange (ETDEWEB)

    Tortorelli, P.F.

    1996-06-01

    Ceramics and ceramic composites offer the potential to operate fossil energy systems at the higher temperatures necessary for improved energy efficiency and better environmental control. However, because many fossil fuel-derived processes contain sulfur, chlorine, and carbon, as well as oxygen, degradation from high-temperature corrosion and environmental effects arising from reactions of solids with gases and condensable products is a common life-determining factor in operating systems. Ceramic-based products are not immune to such degradation; adequate corrosion resistance must be assured to exploit the technical and economic potential of such materials. This is normally accomplished by using stable, sound oxides that exist in their bulk form, that naturally grow as surface layers upon exposure to an oxidizing environment, or that are deposited as a coating on a susceptible material. It is therefore important to examine the critical issues with respect to more environmental stability of ceramics that have the potential to be corrosion resistant in particular fossil environments. Key aspects include not only chemical compatibility, but the influence of the environment on the mechanical behavior of the ceramic materials. In addition, for coatings, the mechanical reliability of the ceramic is a key issue in that an otherwise corrosion-resistant surface layer must remain sound and adherent in order to provide protection to the underlying substrate. The purpose of this work is to support the development of advanced ceramics and ceramic composites for applications in fossil environments by examining critical issues related to high-temperature corrosion resistance. More specifically, the overall objective of this task is to examine the chemical compatibility and reliability of potentially corrosion-resistant ceramics being developed as protective overcoats and/or structural materials as parts of other work elements funded by the AR&TD Program.

  8. New Oxide Materials for an Ultra High Temperature Environment

    Energy Technology Data Exchange (ETDEWEB)

    Perepezko, John H. [Univ. of Wisconsin, Madison, WI (United States). Dept. of Materials Science and Engineering

    2017-11-13

    In this project, a new oxide material, Hf6Ta2O17 has been successfully synthesized by the controlled oxidization of Hf-Ta alloys. This oxide exhibits good oxidation resistance, high temperature phase stability up to more than 2000°C, low thermal conductivity and thus could serve as a component or a coating material in an ultrahigh temperature environment. We have examined the microstructure evolution and phase formation sequence during the oxidation exposure of Hf-Ta alloys at 1500°C and identified that the oxidation of a Hf-26.7atomic %Ta alloy leads to the formation of a single phase adherent Hf6Ta2O17 with a complex atomic structure i.e. superstructure. The overall reactive diffusion pathway is consistent with the calculated Hf-Ta-O ternary phase diagram. Besides the synthesis of Hf6Ta2O17 superstructure by oxidizing Hf-Ta alloys, we have also developed a synthesis method based upon the reactive sintering of the correct ratios of mixed powders of HfO2 and Ta2O5 and verified the low thermal conductivity of Hf6Ta2O17 superstructure on these samples. We have completed a preliminary analysis of the oxidation kinetics for Hf6Ta2O17, which shows an initial parabolic oxidation kinetics.

  9. Bipolar resistive switching and charge transport in silicon oxide memristor

    Energy Technology Data Exchange (ETDEWEB)

    Mikhaylov, Alexey N., E-mail: mian@nifti.unn.ru [Lobachevsky State University of Nizhni Novgorod, 23/3 Gagarin Prospect, Nizhni Novgorod 603950 (Russian Federation); Belov, Alexey I.; Guseinov, Davud V.; Korolev, Dmitry S.; Antonov, Ivan N.; Efimovykh, Denis V.; Tikhov, Stanislav V.; Kasatkin, Alexander P.; Gorshkov, Oleg N.; Tetelbaum, David I.; Bobrov, Alexander I.; Malekhonova, Natalia V.; Pavlov, Dmitry A. [Lobachevsky State University of Nizhni Novgorod, 23/3 Gagarin Prospect, Nizhni Novgorod 603950 (Russian Federation); Gryaznov, Evgeny G. [Lobachevsky State University of Nizhni Novgorod, 23/3 Gagarin Prospect, Nizhni Novgorod 603950 (Russian Federation); Sedakov Scientific-Research Institute, GSP-486, Nizhny Novgorod 603950 (Russian Federation); Yatmanov, Alexander P. [Sedakov Scientific-Research Institute, GSP-486, Nizhny Novgorod 603950 (Russian Federation)

    2015-04-15

    Graphical abstract: - Highlights: • Si-based thin-film memristor structure was fabricated by magnetron sputtering. • We study bipolar resistive switching and charge transport mechanisms. • Resistive switching parameters are determined by a balance between redox reactions. - Abstract: Reproducible bipolar resistive switching has been studied in SiO{sub x}-based thin-film memristor structures deposited by magnetron sputtering technique on the TiN/Ti metalized SiO{sub 2}/Si substrates. It is established that, after electroforming, the structure can be switched between the quasi-ohmic low-resistance state related to silicon chains (conducting filaments) and the high-resistance state with semiconductor-like hopping mechanism of charge transport through the defects in silicon oxide. The switching parameters are determined by a balance between the reduction and oxidation processes that, in turn, are driven by the value and polarity of voltage bias, current, temperature and device environment. The results can be used for the development of silicon-based nonvolatile memory and memristive systems as a key component of future electronics.

  10. Resistant starch consumption promotes lipid oxidation

    Directory of Open Access Journals (Sweden)

    Higgins Janine A

    2004-10-01

    Full Text Available Abstract Background Although the effects of resistant starch (RS on postprandial glycemia and insulinemia have been extensively studied, little is known about the impact of RS on fat metabolism. This study examines the relationship between the RS content of a meal and postprandial/post-absorbative fat oxidation. Results 12 subjects consumed meals containing 0%, 2.7%, 5.4%, and 10.7% RS (as a percentage of total carbohydrate. Blood samples were taken and analyzed for glucose, insulin, triacylglycerol (TAG and free fatty acid (FFA concentrations. Respiratory quotient was measured hourly. The 0%, 5.4%, and 10.7% meals contained 50 μCi [1-14C]-triolein with breath samples collected hourly following the meal, and gluteal fat biopsies obtained at 0 and 24 h. RS, regardless of dose, had no effect on fasting or postprandial insulin, glucose, FFA or TAG concentration, nor on meal fat storage. However, data from indirect calorimetry and oxidation of [1-14C]-triolein to 14CO2 showed that addition of 5.4% RS to the diet significantly increased fat oxidation. In fact, postprandial oxidation of [1-14C]-triolein was 23% greater with the 5.4% RS meal than the 0% meal (p = 0.0062. Conclusions These data indicate that replacement of 5.4% of total dietary carbohydrate with RS significantly increased post-prandial lipid oxidation and therefore could decrease fat accumulation in the long-term.

  11. Comparative study of high temperature oxidation behaviour in AISI 304 and AISI 439 stainless steels

    Directory of Open Access Journals (Sweden)

    Antônio Claret Soares Sabioni

    2003-06-01

    Full Text Available This work deals with a comparison of high temperature oxidation behaviour in AISI 304 austenitic and AISI 439 ferritic stainless steels. The oxidation experiments were performed between 850 and 950 °C, in oxygen and Ar (100 vpm H2. In most cases, it was formed a Cr2O3 protective scale, whose growth kinetics follows a parabolic law. The exception was for the the AISI 304 steel, at 950 °C, in oxygen atmosphere, which forms an iron oxide external layer. The oxidation resistance of the AISI 439 does not depend on the atmosphere. The AISI 304 has the same oxidation resistance in both atmospheres, at 850 °C, but at higher temperatures, its oxidation rate strongly increases in oxygen atmosphere. Concerning the performance of these steels under oxidation, our results show that the AISI 439 steel has higher oxidation resistance in oxidizing atmosphere, above 850 °C, while, in low pO2 atmosphere, the AISI 304 steel has higher oxidation resistance than the AISI 439, in all the temperature range investigated.

  12. Propene oxidation at low and intermediate temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Wilk, R.D.; Cernansky, N.P. (Drexel Univ., Philadelphia, PA (USA). Dept. of Mechanical Engineering); Pitz, W.J.; Westbrook, C.K. (Lawrence Livermore National Lab., CA (USA))

    1989-08-01

    A detailed chemical kinetic mechanism for propene oxidation is developed and used to model reactions in a static reactor at temperatures of 530-740 {Kappa}, equivalence ratios of 0.8-2.0, and a pressure of 600 torr. Modeling of hydrocarbon oxidation in this temperature range is important for the validation of detailed models to be used for performing calculations related to automotive engine knock. The model predicted induction periods and species concentrations for all the species and all conditions measured experimentally in the static reactor. Overall, the calculated concentrations of carbon monoxide and acetaldehyde agreed well with those measured. The calculated concentrations of ethene are low compared to the experimental measurements, and the calculated concentrations of the formaldehyde are high. Agreement for concentrations of carbon dioxide, methane, methanol, acrolein, and propene oxide is mixed. The characteristic s-shape of the fuel concentration history is well predicted. Modeling calculations identified some of the key reaction steps at the present conditions. Addition of OH to propene and H-atom abstraction by OH from propene are important steps in determining the subsequent distributions of intermediate products, such as acetaldehyde, acrolein and formaldehyde. Allyl radicals are very abundant in propene oxidation, and the primary steps found to be responsible for their consumption are reaction with HO/sub 2/ and CH/sub 3/O/sub 2/.

  13. Direct-reading dial for noise temperature and noise resistance

    DEFF Research Database (Denmark)

    Diamond, J.M.

    1967-01-01

    An attenuator arrangement for a noise generator is described. The scheme permits direct reading of both noise resistance and noise temperature¿the latter with a choice of source resistance.......An attenuator arrangement for a noise generator is described. The scheme permits direct reading of both noise resistance and noise temperature¿the latter with a choice of source resistance....

  14. Intermediate Temperature Solid Oxide Fuel Cell Development

    Energy Technology Data Exchange (ETDEWEB)

    S. Elangovan; Scott Barnett; Sossina Haile

    2008-06-30

    Solid oxide fuel cells (SOFCs) are high efficiency energy conversion devices. Present materials set, using yttria stabilized zirconia (YSZ) electrolyte, limit the cell operating temperatures to 800 C or higher. It has become increasingly evident however that lowering the operating temperature would provide a more expeditious route to commercialization. The advantages of intermediate temperature (600 to 800 C) operation are related to both economic and materials issues. Lower operating temperature allows the use of low cost materials for the balance of plant and limits degradation arising from materials interactions. When the SOFC operating temperature is in the range of 600 to 700 C, it is also possible to partially reform hydrocarbon fuels within the stack providing additional system cost savings by reducing the air preheat heat-exchanger and blower size. The promise of Sr and Mg doped lanthanum gallate (LSGM) electrolyte materials, based on their high ionic conductivity and oxygen transference number at the intermediate temperature is well recognized. The focus of the present project was two-fold: (a) Identify a cell fabrication technique to achieve the benefits of lanthanum gallate material, and (b) Investigate alternative cathode materials that demonstrate low cathode polarization losses at the intermediate temperature. A porous matrix supported, thin film cell configuration was fabricated. The electrode material precursor was infiltrated into the porous matrix and the counter electrode was screen printed. Both anode and cathode infiltration produced high performance cells. Comparison of the two approaches showed that an infiltrated cathode cells may have advantages in high fuel utilization operations. Two new cathode materials were evaluated. Northwestern University investigated LSGM-ceria composite cathode while Caltech evaluated Ba-Sr-Co-Fe (BSCF) based pervoskite cathode. Both cathode materials showed lower polarization losses at temperatures as low as 600

  15. A new high temperature resistant glass–ceramic coating for gas ...

    Indian Academy of Sciences (India)

    Unknown

    Abstract. A new high temperature and abrasion resistant glass–ceramic coating system (based on MgO–. Al2O3–TiO2 and ZnO–Al2O3–SiO2 based glass systems) for gas turbine engine components has been developed. Thermal shock resistance, adherence at 90°-bend test and static oxidation resistance at the required ...

  16. One-pot synthesis of reduced graphene oxide@boron nitride nanosheet hybrids with enhanced oxidation-resistant properties

    Science.gov (United States)

    Sun, Guoxun; Bi, Jianqiang; Wang, Weili; Zhang, Jingde

    2017-12-01

    Reduced graphene oxide@boron nitride nanosheet (RGO@BNNS) hybrids were prepared for the first time using template-assisted autoclave pyrolysis technique at the temperature as low as 600 °C. The developed method can be scaled into gram-scale synthesis of the material. The BNNSs combine with RGO through van der Waals interplanar interaction without damaging the structures of RGO. Such ultrathin BNNSs on the surface of RGO can serve as high-performance oxidation-resistant coatings in oxidizing atmospheres at high temperatures. The RGO@BNNS hybrids can sustain up to 800 °C over a relatively long period of time.

  17. High temperature chemically resistant polymer concrete

    Science.gov (United States)

    Sugama, T.; Kukacka, L.E.

    High temperature chemically resistant, non-aqueous polymer concrete composites consist of about 12 to 20% by weight of a water-insoluble polymer binder. The binder is polymerized in situ from a liquid vinyl-type monomer or mixture of vinyl containing monomers such as triallylcyanurate, styrene, acrylonitrile, acrylamide, methacrylamide, methyl-methacrylate, trimethylolpropane trimethacrylate and divinyl benzene. About 5 to 40% by weight of a reactive inorganic filler selected from the group consisting of tricalcium silicate and dicalcium silicate and mixtures containing less than 2% free lime, and about 48 to 83% by weight of silica sand/ and a free radical initiator such as di-tert-butyl peroxide, azobisisobutyronitrile, benzoyl peroxide, lauryl peroxide, other orgaic peroxides and combinations to initiate polymerization of the monomer in the presence of the inorganic filers are used.

  18. Biochemical basis of the high resistance to oxidative stress in ...

    Indian Academy of Sciences (India)

    Unknown

    the fact that D. discoideum is unusually resistant to oxi- dative stress. To address the biochemical events associated with high resistance to oxidative stress, in D. discoideum, the acti- vity of catalase, SOD and GSH-Px antioxidant enzymes were measured. SOD activity did not show any change in cells subjected to oxidative, ...

  19. Effect of temperature on structure and corrosion resistance for ...

    Indian Academy of Sciences (India)

    Moreover, cracks were observed by SEM in coating surface and interface at the plating temperature of 90 ∘ C. Coating corrosion resistance is highly dependent on temperature according to polarization curves. The optimum temperature isfound to be 80 ∘ C and the possible reasons of corrosion resistance for NiWP coating ...

  20. Study of nitric oxide catalytic oxidation on manganese oxides-loaded activated carbon at low temperature

    Energy Technology Data Exchange (ETDEWEB)

    You, Fu-Tian [Key Laboratory of Urban Pollutant Conversion, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen (China); University of Chinese Academy of Sciences, Beijing (China); Yu, Guang-Wei, E-mail: gwyu@iue.ac.cn [Key Laboratory of Urban Pollutant Conversion, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen (China); Wang, Yin, E-mail: yinwang@iue.ac.cn [Key Laboratory of Urban Pollutant Conversion, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen (China); Xing, Zhen-Jiao [Key Laboratory of Urban Pollutant Conversion, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen (China); Liu, Xue-Jiao; Li, Jie [Key Laboratory of Urban Pollutant Conversion, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen (China); University of Chinese Academy of Sciences, Beijing (China)

    2017-08-15

    Highlights: • Loading manganese oxides on activated carbon effectively promotes NO oxidation. • NO adsorption-desorption on activated carbon is fundamental to NO oxidation. • A high Mn{sup 4+}/Mn{sup 3+} ratio contributes to NO oxidation by promoting lattice O transfer. - Abstract: Nitric oxide (NO) is an air pollutant that is difficult to remove at low concentration and low temperature. Manganese oxides (MnO{sub x})-loaded activated carbon (MLAC) was prepared by a co-precipitation method and studied as a new catalyst for NO oxidation at low temperature. Characterization of MLAC included X-ray diffraction (XRD), scanning electron microscopy (SEM), N{sub 2} adsorption/desorption and X-ray photoelectron spectroscopy (XPS). Activity tests demonstrated the influence of the amount of MnO{sub x} and the test conditions on the reaction. MLAC with 7.5 wt.% MnO{sub x} (MLAC003) exhibits the highest NO conversion (38.7%) at 1000 ppm NO, 20 vol.% O{sub 2}, room temperature and GHSV ca. 16000 h{sup −1}. The NO conversion of MLAC003 was elevated by 26% compared with that of activated carbon. The results of the MLAC003 activity test under different test conditions demonstrated that NO conversion is also influenced by inlet NO concentration, inlet O{sub 2} concentration, reaction temperature and GHSV. The NO adsorption-desorption process in micropores of activated carbon is fundamental to NO oxidation, which can be controlled by pore structure and reaction temperature. The activity elevation caused by MnO{sub x} loading is assumed to be related to Mn{sup 4+}/Mn{sup 3+} ratio. Finally, a mechanism of NO catalytic oxidation on MLAC based on NO adsorption-desorption and MnO{sub x} lattice O transfer is proposed.

  1. Gallium Oxide Nanostructures for High Temperature Sensors

    Energy Technology Data Exchange (ETDEWEB)

    Chintalapalle, Ramana V. [Univ. of Texas, El Paso, TX (United States)

    2015-04-30

    Gallium oxide (Ga2O3) thin films were produced by sputter deposition by varying the substrate temperature (Ts) in a wide range (Ts=25-800 °C). The structural characteristics and electronic properties of Ga2O3 films were evaluated using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), Rutherford backscattering spectrometry (RBS) and spectrophotometric measurements. The effect of growth temperature is significant on the chemistry, crystal structure and morphology of Ga2O3 films. XRD and SEM analyses indicate that the Ga2O3 films grown at lower temperatures were amorphous while those grown at Ts≥500 oC were nanocrystalline. RBS measurements indicate the well-maintained stoichiometry of Ga2O3 films at Ts=300-800 °C. The electronic structure determination indicated that the nanocrystalline Ga2O3films exhibit a band gap of ~5 eV. Tungsten (W) incorporated Ga2O3 films were produced by co-sputter deposition. W-concentration was varied by the applied sputtering-power. No secondary phase formation was observed in W-incorporated Ga2O3 films. W-induced effects were significant on the structure and electronic properties of Ga2O3 films. The band gap of Ga2O3 films without W-incorporation was ~5 eV. Oxygen sensor characteristics evaluated using optical and electrical methods indicate a faster response in W-doped Ga2O3 films compared to intrinsic Ga2O3 films. The results demonstrate the applicability of both intrinsic and W-doped Ga-oxide films for oxygen sensor application at temperatures ≥700 °C.

  2. Oxidation-Reduction Resistance of Advanced Copper Alloys

    Science.gov (United States)

    Greenbauer-Seng, L. (Technical Monitor); Thomas-Ogbuji, L.; Humphrey, D. L.; Setlock, J. A.

    2003-01-01

    Resistance to oxidation and blanching is a key issue for advanced copper alloys under development for NASA's next generation of reusable launch vehicles. Candidate alloys, including dispersion-strengthened Cu-Cr-Nb, solution-strengthened Cu-Ag-Zr, and ODS Cu-Al2O3, are being evaluated for oxidation resistance by static TGA exposures in low-p(O2) and cyclic oxidation in air, and by cyclic oxidation-reduction exposures (using air for oxidation and CO/CO2 or H2/Ar for reduction) to simulate expected service environments. The test protocol and results are presented.

  3. Long-Term Cyclic Oxidation Behavior of Wrought Commercial Alloys at High Temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Li, Bingtao [Iowa State Univ., Ames, IA (United States)

    2003-01-01

    The oxidation resistance of a high-temperature alloy is dependent upon sustaining the formation of a protective scale, which is strongly related to the alloying composition and the oxidation condition. The protective oxide scale only provides a finite period of oxidation resistance owing to its eventual breakdown, which is especially accelerated under thermal cycling conditions. This current study focuses on the long-term cyclic oxidation behavior of a number of commercial wrought alloys. The alloys studied were Fe- and Ni-based, containing different levels of minor elements, such as Si, Al, Mn, and Ti. Oxidation testing was conducted at 1000 and 1100 C in still air under both isothermal and thermal cycling conditions (1-day and 7-days). The specific aspects studied were the oxidation behavior of chromia-forming alloys that are used extensively in industry. The current study analyzed the effects of alloying elements, especially the effect of minor element Si, on cyclic oxidation resistance. The behavior of oxide scale growth, scale spallation, subsurface changes, and chromium interdiffusion in the alloy were analyzed in detail. A novel model was developed in the current study to predict the life-time during cyclic oxidation by simulating oxidation kinetics and chromium interdiffusion in the subsurface of chromia-forming alloys.

  4. Study of nitric oxide catalytic oxidation on manganese oxides-loaded activated carbon at low temperature

    Science.gov (United States)

    You, Fu-Tian; Yu, Guang-Wei; Wang, Yin; Xing, Zhen-Jiao; Liu, Xue-Jiao; Li, Jie

    2017-08-01

    Nitric oxide (NO) is an air pollutant that is difficult to remove at low concentration and low temperature. Manganese oxides (MnOx)-loaded activated carbon (MLAC) was prepared by a co-precipitation method and studied as a new catalyst for NO oxidation at low temperature. Characterization of MLAC included X-ray diffraction (XRD), scanning electron microscopy (SEM), N2 adsorption/desorption and X-ray photoelectron spectroscopy (XPS). Activity tests demonstrated the influence of the amount of MnOx and the test conditions on the reaction. MLAC with 7.5 wt.% MnOx (MLAC003) exhibits the highest NO conversion (38.7%) at 1000 ppm NO, 20 vol.% O2, room temperature and GHSV ca. 16000 h-1. The NO conversion of MLAC003 was elevated by 26% compared with that of activated carbon. The results of the MLAC003 activity test under different test conditions demonstrated that NO conversion is also influenced by inlet NO concentration, inlet O2 concentration, reaction temperature and GHSV. The NO adsorption-desorption process in micropores of activated carbon is fundamental to NO oxidation, which can be controlled by pore structure and reaction temperature. The activity elevation caused by MnOx loading is assumed to be related to Mn4+/Mn3+ ratio. Finally, a mechanism of NO catalytic oxidation on MLAC based on NO adsorption-desorption and MnOx lattice O transfer is proposed.

  5. Isothermal and cyclic oxidation resistance of pack siliconized Mo-Si-B alloy

    Science.gov (United States)

    Majumdar, Sanjib

    2017-08-01

    Oxidation behaviour of MoSi2 coated Mo-9Si-8B-0.75Y (at.%) alloy has been investigated at three critical temperatures including 750, 900 and 1400 °C in static air. Thermogravimetric analysis (TGA) data indicates a remarkable improvement in the oxidation resistance of the silicide coated alloy in both isothermal and cyclic oxidation tests. The cross-sectional scanning electron microscopy and energy dispersive spectroscopic analysis reveal the occurrence of internal oxidation particularly at the crack fronts formed in the outer MoSi2 layer during thermal cycling. The dominant oxidation mechanisms at 750-900 °C and 1400 °C are identified. Development of MoB inner layer further improves the oxidation resistance of the silicide coated alloy.

  6. Temperature dependence of contact resistance at metal/MWNT interface

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sang-Eui; Moon, Kyoung-Seok; Sohn, Yoonchul, E-mail: yoonchul.son@samsung.com [Materials Research Center, Samsung Advanced Institute of Technology, Samsung Electronics, Suwon 443-803 (Korea, Republic of)

    2016-07-11

    Although contact resistance of carbon nanotube (CNT) is one of the most important factors for practical application of electronic devices, a study regarding temperature dependence on contact resistance of CNTs with metal electrodes has not been found. Here, we report an investigation of contact resistance at multiwalled nanotube (MWNT)/Ag interface as a function of temperature, using MWNT/polydimethylsiloxane (PDMS) composite. Electrical resistance of MWNT/PDMS composite revealed negative temperature coefficient (NTC). Excluding the contact resistance with Ag electrode, the NTC effect became less pronounced, showing lower intrinsic resistivity with the activation energy of 0.019 eV. Activation energy of the contact resistance of MWNT/Ag interface was determined to be 0.04 eV, two times larger than that of MWNT-MWNT network. The increase in the thermal fluctuation assisted electron tunneling is attributed to conductivity enhancement at both MWNT/MWNT and MWNT/Ag interfaces with increasing temperature.

  7. Auger electron spectroscopy study of oxidation of a PdCr alloy used for high-temperature sensors

    Science.gov (United States)

    Boyd, Darwin L.; Zeller, Mary V.; Vargas-Aburto, Carlos

    1993-01-01

    A Pd-13 wt. percent Cr solid solution is a promising high-temperature strain gage alloy. In bulk form it has a number of properties that are desirable in a resistance strain gage material, such as a linear electrical resistance versus temperature curve to 1000 C and stable electrical resistance in air at 1000 C. However, unprotected fine wire gages fabricated from this alloy perform well only to 600 C. At higher temperatures severe oxidation degrades their electrical performance. In this work Auger electron spectroscopy was used to study the oxidation chemistry of the alloy wires and ribbons. Results indicate that the oxidation is caused by a complex mechanism that is not yet fully understood. As expected, during oxidation, a layer of chromium oxide is formed. This layer, however, forms beneath a layer of metallic palladium. The results of this study have increased the understanding of the oxidation mechanism of Pd-13 wt. percent Cr.

  8. The Impact of Morphology and Composition on the Resistivity and Oxidation Resistance of Metal Nanostructure Films

    Science.gov (United States)

    Stewart, Ian Edward

    Printed electronics, including transparent conductors, currently rely on expensive materials to generate high conductivity devices. Conductive inks for thick film applications utilizing inkjet, aerosol, and screen printing technologies are often comprised of expensive and rare silver particles. Thin film applications such as organic light emitting diodes (OLEDs) and organic photovoltaics (OPVs) predominantly employ indium tin oxide (ITO) as the transparent conductive layer which requires expensive and wasteful vapor deposition techniques. Thus an alternative to silver and ITO with similar performance in printed electronics warrants considerable attention. Copper nanomaterials, being orders of magnitude cheaper and more abundant than silver or indium, solution-coatable, and exhibiting a bulk conductivity only 6 % less than silver, have emerged as a promising candidate for incorporation in printed electronics. First, we examine the effect of nanomaterial shape on the conductivity of thick films. The inks used in such films often require annealing at elevated temperature in order to sinter the silver nanoparticles together and obtain low resistivities. We explore the change in morphology and resistivity that occurs upon heating thick films of silver nanowires (of two different lengths, Ag NWs), nanoparticles (Ag NPs), and microflakes (Ag MFs) deposited from water at temperatures between 70 and 400 °C. At the lowest temperatures, longer Ag NWs exhibited the lowest resistivity (1.8 x 10-5 O cm), suggesting that the resistivity of thick films of silver nanostructures is dominated by the contact resistance between particles. This result supported previous research showing that junction resistance between Ag NWs in thin film conductors also dominates optoelectronic performance. Since the goal is to replace silver with copper, we perform a similar analysis by using a pseudo-2D rod network modeling approach that has been modified to include lognormal distributions in length

  9. Extraction of temperature dependent interfacial resistance of thermoelectric modules

    DEFF Research Database (Denmark)

    Chen, Min

    2011-01-01

    This article discusses an approach for extracting the temperature dependency of the electrical interfacial resistance associated with thermoelectric devices. The method combines a traditional module-level test rig and a nonlinear numerical model of thermoelectricity to minimize measurement errors...... on the interfacial resistance. The extracted results represent useful data to investigating the characteristics of thermoelectric module resistance and comparing performance of various modules....

  10. High temperature resistant nanofiber by bubbfil-spinning

    Directory of Open Access Journals (Sweden)

    Li Ya

    2015-01-01

    Full Text Available Heat-resisting nanofibers have many potential applications in various industries, and the bubbfil spinning is the best candidate for mass-production of such materials. Polyether sulfone/zirconia solution with a bi-solvent system is used in the experiment. Experimental result reveals that polyether sulfone/zirconia nanofibers have higher resistance to high temperature than pure polyether sulfone fibers, and can be used as high-temperature-resistant filtration materials.

  11. Isothermal and cyclic oxidation resistance of pack siliconized Mo–Si–B alloy

    Energy Technology Data Exchange (ETDEWEB)

    Majumdar, Sanjib, E-mail: sanjib@barc.gov.in

    2017-08-31

    Highlights: • Pack-siliconizing of Mo–Si–B alloy improves its oxidation resistance at 750, 900 and 1400 °C. • A marginal weight change of the coated alloy is detected in isothermal and cyclic oxidation tests. • Kinetics of growth of protective SiO{sub 2} scale is much faster at 1400 °C. • Self-healing SiO{sub 2} is developed at the cracks formed in MoSi{sub 2} layer during cyclic oxidation tests. - Abstract: Oxidation behaviour of MoSi{sub 2} coated Mo–9Si–8B–0.75Y (at.%) alloy has been investigated at three critical temperatures including 750, 900 and 1400 °C in static air. Thermogravimetric analysis (TGA) data indicates a remarkable improvement in the oxidation resistance of the silicide coated alloy in both isothermal and cyclic oxidation tests. The cross-sectional scanning electron microscopy and energy dispersive spectroscopic analysis reveal the occurrence of internal oxidation particularly at the crack fronts formed in the outer MoSi{sub 2} layer during thermal cycling. The dominant oxidation mechanisms at 750–900 °C and 1400 °C are identified. Development of MoB inner layer further improves the oxidation resistance of the silicide coated alloy.

  12. High Temperature Resistant Organopolysiloxane Coating for Protecting and Repairing Rigid Thermal Insulation

    Science.gov (United States)

    Leiser, Daniel B. (Inventor); Hsu, Ming-Ta S. (Inventor); Chen, Timothy S. (Inventor)

    1999-01-01

    Ceramics are protected from high temperature degradation, including high temperature, oxidative, aeroconvective degradation by a high temperature and oxidation resistant coating of a room temperature curing, hydrolyzed and partially condensed liquid polyorganosiloxane to the surface of the ceramic. The liquid polyorganosiloxane is formed by the hydrolysis and partial condensation of an alkyltrialkoxysilane with water or a mixture of an alkyltrialkoxysilane and a dialkyldialkoxysilane with water. The liquid polyorganosiloxane cures at room temperature on the surface of the ceramic to form a hard, protective, solid coating which forms a high temperature environment, and is also used as an adhesive for adhering a repair plug in major damage to the ceramic. This has been found useful for protecting and repairing porous, rigid ceramics of a type used on reentry space vehicles.

  13. Thermal sensor based zinc oxide diode for low temperature applications

    Energy Technology Data Exchange (ETDEWEB)

    Ocaya, R.O. [Department of Physics, University of the Free State (South Africa); Al-Ghamdi, Ahmed [Department of Physics, Faculty of Science, King Abdulaziz University, Jeddah, 21589 (Saudi Arabia); El-Tantawy, F. [Department of Physics, Faculty of Science, Suez Canal University, Ismailia (Egypt); Center of Nanotechnology, King Abdulaziz University, Jeddah (Saudi Arabia); Farooq, W.A. [Department of Physics and Astronomy, College of Science, King Saud University, Riyadh (Saudi Arabia); Yakuphanoglu, F., E-mail: fyhan@hotmail.com [Department of Physics, Faculty of Science, King Abdulaziz University, Jeddah, 21589 (Saudi Arabia); Department of Physics, Faculty of Science, Firat University, Elazig, 23169 (Turkey)

    2016-07-25

    The device parameters of Al/p-Si/Zn{sub 1-x}Al{sub x}O-NiO/Al Schottky diode for x = 0.005 were investigated over the 50 K–400 K temperature range using direct current–voltage (I–V) and impedance spectroscopy. The films were prepared using the sol–gel method followed by spin-coating on p-Si substrate. The ideality factor, barrier height, resistance and capacitance of the diode were found to depend on temperature. The calculated barrier height has a mean. Capacitance–voltage (C–V) measurements show that the capacitance decreases with increasing frequency, suggesting a continuous distribution of interface states over the surveyed 100 kHz to 1 MHz frequency range. The interface state densities, N{sub ss}, of the diode were calculated and found to peak as functions of bias and temperature in two temperature regions of 50 K–300 K and 300 K–400 K. A peak value of approximately 10{sup 12}/eV cm{sup 2} was observed around 0.7 V bias for 350 K and at 3 × 10{sup 12}/eVcm{sup 2} around 2.2 V bias for 300 K. The relaxation time was found to average 4.7 μs over all the temperatures, but showing its lowest value of 1.58 μs at 300 K. It is seen that the interface states of the diode is controlled by the temperature. This suggests that Al/p-Si/Zn1-xAlxO-NiO/Al diode can be used as a thermal sensors for low temperature applications. - Highlights: • Al/pSi/Zn1-xAlxO-NiO/Al Schottky diode was fabricated by sol gel method. • The interface state density of the diode is controlled by the temperature. • Zinc oxide based diode can be used as a thermal sensor for low temperature applications.

  14. Influence of Temperature and Humidity on Bakelite Resistivity

    CERN Document Server

    Arnaldi, R; Barret, V; Bastid, N; Blanchard, G; Chiavassa, E; Cortese, P; Crochet, Philippe; Dellacasa, G; De Marco, N; Dupieux, P; Espagnon, B; Fargeix, J; Ferretti, A; Gallio, M; Lamoine, L; Luquin, Lionel; Manso, F; Mereu, P; Métivier, V; Musso, A; Oppedisano, C; Piccotti, A; Rahmani, A; Royer, L; Roig, O; Scalas, E; Scomparin, E; Vercellin, Ermanno

    1999-01-01

    Presentation made at RPC99 and submitted to Elsevier PreprintThe use of phenolic or melaminic bakelite as RPC electrodes is widespread. The electrode resistivity is an important parameter for the RPC performance. As recent studies have pointed out, the bakelite resistivity changes with temperature and is influenced by humidity. In order to gain a quantitative understanding on the influence of temperature and humidity on RPC electrodes, we assembled an apparatus to measure resistivity in well-controlled conditions. A detailed description of the experimental set-up as well as the first resistivity measurements for various laminates in different environmental conditions are presented.

  15. Copper oxide resistive switching memory for e-textile

    Directory of Open Access Journals (Sweden)

    Jin-Woo Han

    2011-09-01

    Full Text Available A resistive switching memory suitable for integration into textiles is demonstrated on a copper wire network. Starting from copper wires, a Cu/CuxO/Pt sandwich structure is fabricated. The active oxide film is produced by simple thermal oxidation of Cu in atmospheric ambient. The devices display a resistance switching ratio of 102 between the high and low resistance states. The memory states are reversible and retained over 107 seconds, with the states remaining nondestructive after multiple read operations. The presented device on the wire network can potentially offer a memory for integration into smart textile.

  16. High-Temperature Oxidation Behavior and Kinetics of Forged 12Cr-MoVW Steel

    Directory of Open Access Journals (Sweden)

    Kim Yong Hwan

    2017-06-01

    Full Text Available The oxidation kinetics of forged 12Cr-MoVW steel was investigated in an air (N2+O2 atmosphere at 873-1073 K (Δ50 K using thermogravimetric analysis. The oxidized samples were characterized using X-ray diffraction, and the surface and cross-sectional morphologies were examined using scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy. The forged 12Cr-MoVW steel samples exhibited parabolic behavior and a low oxidation rate compared with their as-cast counterparts. A protective oxide layer was uniformly formed at relatively low temperature (≤973 K for the forged samples, which thus exhibited better oxidation resistance than the as-cast ones. These oxides are considered solid-solution compounds such as (Fe, Cr2O3.

  17. The Yttrium Effect on Nanoscale Structure, Mechanical Properties, and High-Temperature Oxidation Resistance of (Ti0.6Al0.4)1- x Y x N Multilayer Coatings

    Science.gov (United States)

    Wang, Jingxian; Yazdi, Mohammad Arab Pour; Lomello, Fernando; Billard, Alain; Kovács, András; Schuster, Frédéric; Guet, Claude; White, Timothy J.; Wouters, Yves; Pascal, Céline; Sanchette, Frédéric; Dong, ZhiLi

    2017-09-01

    As machine tool coating specifications become increasingly stringent, the fabrication of protective titanium aluminum nitride (Ti-Al-N) films by physical vapor deposition (PVD) is progressively more demanding. Nanostructural modification through the incorporation of metal dopants can enhance coating mechanical properties. However, dopant selection and their near-atomic-scale role in performance optimization is limited. Here, yttrium was alloyed in multilayered Ti-Al-N films to tune microstructures, microchemistries, and properties, including mechanical characteristics, adhesion, wear resistance, and resilience to oxidation. By regulating processing parameters, the multilayer period (Λ) and Y content could be adjusted, which, in turn, permitted tailoring of grain nucleation and secondary phase formation. With the composition fixed at x = 0.024 in (Ti0.6Al0.4)1- x Y x N and Λ increased from 5.5 to 24 nm, the microstructure transformed from acicular grains with 〈111〉 preferred orientation to equiaxed grains with 〈200〉 texture, while the hardness (40.8 ± 2.8 GPa to 29.7 ± 4.9 GPa) and Young's modulus (490 ± 47 GPa to 424 ± 50 GPa) concomitantly deteriorated. Alternately, when Λ = 5.5 nm and x in (Ti0.6Al0.4)1- x Y x N was raised from 0 to 0.024, the hardness was enhanced (28.7 ± 7.3 GPa to 40.8 ± 2.8 GPa) while adhesion and wear resistance were not compromised. The Ti-Al-N adopted a rock-salt type structure with Y displacing either Ti or Al and stabilizing a secondary wurtzite phase. Moreover, Y effectively retarded coating oxidation at 1073 K (800 °C) in air by inhibiting grain boundary oxygen diffusion.

  18. Low Temperature Processed Complementary Metal Oxide Semiconductor (CMOS) Device by Oxidation Effect from Capping Layer

    KAUST Repository

    Wang, Zhenwei

    2015-04-20

    In this report, both p- and n-type tin oxide thin-film transistors (TFTs) were simultaneously achieved using single-step deposition of the tin oxide channel layer. The tuning of charge carrier polarity in the tin oxide channel is achieved by selectively depositing a copper oxide capping layer on top of tin oxide, which serves as an oxygen source, providing additional oxygen to form an n-type tin dioxide phase. The oxidation process can be realized by annealing at temperature as low as 190°C in air, which is significantly lower than the temperature generally required to form tin dioxide. Based on this approach, CMOS inverters based entirely on tin oxide TFTs were fabricated. Our method provides a solution to lower the process temperature for tin dioxide phase, which facilitates the application of this transparent oxide semiconductor in emerging electronic devices field.

  19. Evaluation of Heat Capacity and Resistance to Cyclic Oxidation of Nickel Superalloys

    Directory of Open Access Journals (Sweden)

    Przeliorz R.

    2014-08-01

    Full Text Available Paper presents the results of evaluation of heat resistance and specific heat capacity of MAR-M-200, MAR-M-247 and Rene 80 nickel superalloys. Heat resistance was evaluated using cyclic method. Every cycle included heating in 1100°C for 23 hours and cooling for 1 hour in air. Microstructure of the scale was observed using electron microscope. Specific heat capacity was measured using DSC calorimeter. It was found that under conditions of cyclically changing temperature alloy MAR-M-247 exhibits highest heat resistance. Formed oxide scale is heterophasic mixture of alloying elements, under which an internal oxidation zone was present. MAR-M-200 alloy has higher specific heat capacity compared to MAR-M-247. For tested alloys in the temperature range from 550°C to 800°C precipitation processes (γ′, γ″ are probably occurring, resulting in a sudden increase in the observed heat capacity.

  20. Low Temperature Resistive Switching Behavior in a Manganite

    Science.gov (United States)

    Salvo, Christopher; Lopez, Melinda; Tsui, Stephen

    2012-02-01

    The development of new nonvolatile memory devices remains an important field of consumer electronics. A possible candidate is bipolar resistive switching, a method by which the resistance of a material changes when a voltage is applied. Although there is a great deal of research on this topic, not much has been done at low temperatures. In this work, we compare the room temperature and low temperature behaviors of switching in a manganite thin film. The data indicates that the switching is suppressed upon cooling to cryogenic temperatures, and the presence of crystalline charge traps is tied to the physical mechanism.

  1. Fire Related Temperature Resistance of Fly Ash Based Geopolymer Mortar

    Directory of Open Access Journals (Sweden)

    Jeyalakshmi R.

    2017-01-01

    Full Text Available The study presented in this paper is on the effect of heat treatment on fly ash based geopolymer mortar synthesized from fly ash (Class F –Low lime using alkaline binary activator solution containing sodium hydroxide (18 M and sodium silicate solution (MR 2.0, cured at 80oC for 24 h. 7 days aged specimen heated at elevated temperature (200°C, 400°C, 600°C and 800°C for the sustained period of 2hrs. The TGA/DTA analysis and thermal conductivity measurement as per ASTM C113 were carried out besides the compressive strengths. The thermal stability of the fly ash mortar at elevated temperature was found to be high as reflected in the observed value of f800°C/f30°C being more than 1 and this ratio was raised to about 1.3 with the addition of 2% Zirconium di oxide (ZrO2. No visible cracks were found on the specimens with and without ZrO2 when 800°C was sustained for 4 hrs in smaller specimens of size: 50 mm diameter x 100 mm height and in also bigger size specimens: 22 cm × 11 cm × 7 cm specimens. TGA/DTA analysis of the geopolymer paste showed that the retention of mass was around 90%. The addition of ZrO2 improved thermal resistance. The micro structure of the matrix found to be intact even at elevated temperature that was evident from the FESEM studies.

  2. Improving the scratch resistance of sol-gel metal oxide coatings cured at 250 C through use of thermogenerated amines

    NARCIS (Netherlands)

    Langanke, J.; Arfsten, N.; Buskens, P.; Habets, R.; Klankermayer, J.; Leitner, W.

    2013-01-01

    Scratch resistant sol-gel metal oxide coatings typically require a thermal post-treatment step (curing process) at temperatures between 400 and 700 C. In this report, we demonstrate that the in situ generation of amines within sol-gel films facilitates the preparation of scratch resistant metal

  3. High-Temperature Oxide Regrowth on Mechanically-Damaged Surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Blau, Peter Julian [ORNL; Lowe, Tracie M [ORNL

    2008-01-01

    Here we report the effects of mechanical damage from a sharp stylus on the regrowth of oxide layers on a Ni-based superalloy known as Pyromet 80A . It was found that the oxide that reformed on the damaged portion of a pre-oxidized surface differed from that which formed on undamaged areas after the equal exposures to elevated temperature in air. These findings have broad implications for modeling the processes of material degradation in applications such as exhaust valves in internal combustion engines because they imply that static oxidation data for candidate materials may not adequately reflect their reaction to operating environments that involve both mechanical contact and oxidation.

  4. Reduction of graphene oxide and its effect on square resistance of reduced graphene oxide films

    Energy Technology Data Exchange (ETDEWEB)

    Hou, Zhaoxia; Zhou, Yin; Li, Guang Bin; Wang, Shaohong; Wang, Mei Han; Hu, Xiaodan; Li, Siming [Liaoning Province Key Laboratory of New Functional Materials and Chemical Technology, School ofMechanical Engineering, Shenyang University, Shenyang (China)

    2015-06-15

    Graphite oxide was prepared via the modified Hummers’ method and graphene via chemical reduction. Deoxygenation efficiency of graphene oxide was compared among single reductants including sodium borohydride, hydrohalic acids, hydrazine hydrate, and vitamin C. Two-step reduction of graphene oxide was primarily studied. The reduced graphene oxide was characterized by XRD, TG, SEM, XPS, and Raman spectroscopy. Square resistance was measured as well. Results showed that films with single-step N2H4 reduction have the best transmittance and electrical conductivity with square resistance of ~5746 Ω/sq at 70% transmittance. This provided an experimental basis of using graphene for electronic device applications.

  5. Temperature and humidity dependence of bulk resistivity of bakelite for resistive plate chambers in CMS

    CERN Document Server

    Ahn, S H; Bahk, S Y; Gapienko, V A; Hong, B; Hong, S J; Jung, S Y; Kim, J Y; Kim, Y J; Kim, Y U; Koo, D G; Lee, K S; Lee, S J; Lee, Y L; Lim, I T; Nam, S K; Pac, M Y; Park, S K; Ra, Y S; Rhee, J T; Seo, S W; Sim, K S

    2000-01-01

    This paper presents data obtained in a systematic study on the bulk resistivity of Korean bakelike as a function of temperature in the range 20-30 degrees C and relative humidity in the range 35-65%. Strong dependence of resistivity on both temperature and humidity was observed. Measurements were carried out in the framework of R&D work on resistive plate chambers which will be used in the CMS detector. (4 refs).

  6. Development of Resistance-Based pH Sensor Using Zinc Oxide Nanorods.

    Science.gov (United States)

    Copal, Vernalyn C; Tuico, Anthony R; Mendoza, Jamie P; Ferrolino, John Paul R; Vergara, Christopher Jude T; Salvador, Arnel A; Estacio, Elmer S; Somintac, Armando S

    2016-06-01

    The resistance-based pH sensing capability of ZnO nanorods was presented in this study. Interdigitated finger structures of nickel/gold (Ni/Au) electrodes were fabricated on the substrates prior to the sensing material. The effect of varying electrode widths was also considered. Zinc oxide (ZnO) film, as seed layer, was deposited via spray pyrolysis, and zinc oxide nanorods (ZnO-NRs) were grown via low temperature chemical bath deposition. Resistance measurements have shown plausible difference in varying pH of a test solution. The sensor was found reasonably more appreciable in sensing acidic solutions. The electrode widths were also found to relay substantial consequence in the resistance-based sensor. The least electrode-width design has shown a significant increase in the sensitivity of the sensor, with higher initial resistance and greater range of response.

  7. Thermal resistances of crystalline and amorphous few-layer oxide thin films

    Science.gov (United States)

    Chen, Liang; Kumari, Niru; Hou, Yu

    2017-11-01

    Thermal insulation at nanoscale is of crucial importance for non-volatile memory devices such as phase change memory and memristors. We perform non-equilibrium molecular dynamics simulations to study the effects of interface materials and structures on thermal transport across the few-layer dielectric nanostructures. The thermal resistance across few-layer nanostructures and thermal boundary resistance at interfaces consisting of SiO2/HfO2, SiO2/ZrO2 or SiO2/Al2O3 are obtained for both the crystalline and amorphous structures. Based on the comparison temperature profiles and phonon density of states, we show that the thermal boundary resistances are much larger in crystalline few-layer oxides than the amorphous ones due to the mismatch of phonon density of state between distinct oxide layers. Compared with the bulk SiO2, the increase of thermal resistance across crystalline few-layer oxides results from the thermal boundary resistance while the increase of thermal resistance across amorphous few-layer oxides is attributed to the lower thermal conductivity of the amorphous thin films.

  8. Examining the electrical and chemical properties of reduced graphene oxide with varying annealing temperatures in argon atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Chambers, Benjamin A. [Centre for NanoScale Science and Technology, School of Chemical and Physical Sciences Flinders University, GPO Box 2100, Adelaide 5001, SA (Australia); Notarianni, Marco [Institute for Future Environments and School of Chemistry, Physics, and Mechanical Engineering, Queensland University of Technology, Brisbane 4001, QLD (Australia); Plasma-Therm LLC, 10050 16th St North, St. Petersburg, FL 33716 (United States); Liu, Jinzhang [School of Materials Science and Engineering, Beihang University, Beijing 100191 (China); Motta, Nunzio, E-mail: n.motta@qut.edu.au [Institute for Future Environments and School of Chemistry, Physics, and Mechanical Engineering, Queensland University of Technology, Brisbane 4001, QLD (Australia); Andersson, Gunther G., E-mail: Gunther.andersson@flinders.edu.au [Centre for NanoScale Science and Technology, School of Chemical and Physical Sciences Flinders University, GPO Box 2100, Adelaide 5001, SA (Australia)

    2015-11-30

    Graphical abstract: - Highlights: • Graphene oxide was reduced by annealing up to 1000 °C. • Sheet resistance of the graphene oxide layer decreases in the annealing process. • Sheet resistance decreases with increase in sp{sup 2} hybridised carbon. • Density of states at low binding energy increase with decreasing sheet resistance. - Abstract: Graphene oxide flakes were successfully fabricated and deposited as a film onto a silicon substrate. A series of these samples were annealed at various temperatures under a low pressure argon environment. The valence structure of the surface is examined using ultraviolet photoelectron spectroscopy whilst the chemical nature of the surface is examined using X-ray photoelectron spectroscopy. The sheet resistance was measured to document the performance changes with variation in electronic and chemical nature of the surface. It was found that increasing the annealing temperature increased the 2p π content leading to a better conductivity and reduction in sheet resistance.

  9. Using electrical resistance tomography to map subsurface temperatures

    Science.gov (United States)

    Ramirez, Abelardo L.; Chesnut, Dwayne A.; Daily, William D.

    1994-01-01

    A method is provided for measuring subsurface soil or rock temperatures remotely using electrical resistivity tomography (ERT). Electrical resistivity measurements are made using electrodes implanted in boreholes driven into the soil and/or at the ground surface. The measurements are repeated as some process changes the temperatures of the soil mass/rock mass. Tomographs of electrical resistivity are calculated based on the measurements using Poisson's equation. Changes in the soil/rock resistivity can be related to changes in soil/rock temperatures when: (1) the electrical conductivity of the fluid trapped in the soil's pore space is low, (2) the soil/rock has a high cation exchange capacity and (3) the temperature changes are sufficiently high. When these three conditions exist the resistivity changes observed in the ERT tomographs can be directly attributed to changes in soil/rock temperatures. This method provides a way of mapping temperature changes in subsurface soils remotely. Distances over which the ERT method can be used to monitor changes in soil temperature range from tens to hundreds of meters from the electrode locations.

  10. Application of hydrogen injection and oxidation to low temperature solution-processed oxide semiconductors

    Directory of Open Access Journals (Sweden)

    Masashi Miyakawa

    2016-08-01

    Full Text Available Solution-processed oxide semiconductors are promising candidates for the low cost, large scale fabrication of oxide thin-film transistors (TFTs. In this work, a method using hydrogen injection and oxidation (HIO that allows the low temperature solution processing of oxide semiconductors was demonstrated. We found that this method significantly decreases the concentration of residual species while improving the film densification. Additionally, enhanced TFT performance was confirmed following the use of processing temperatures as low as 300 °C. The proposed process is potentially applicable to the fabrication of a wide variety of solution-processed oxide semiconductors.

  11. Effect of oxidation and annealing temperature on optical and ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 37; Issue 3. Effect of oxidation and ... Keywords. SnO2 thin films; optical properties; optical bandgap; Urbach energy; surface roughness; XRD. ... The effect of oxidation temperature on the optical and structural properties of SnO2 films were investigated. Higher ...

  12. Effect of oxidation and annealing temperature on optical and ...

    Indian Academy of Sciences (India)

    Administrator

    which means that initial oxidation temperature played an important role on surface uniformity of SnO2 thin films. Keywords. SnO2 thin films; optical properties; optical bandgap; Urbach energy; surface roughness; XRD. 1. Introduction. Tin oxide belongs to a class of materials that have suitable electrical conductivity and high ...

  13. Propane Oxidation at High Pressure and Intermediate Temperatures

    DEFF Research Database (Denmark)

    Hashemi, Hamid; Christensen, Jakob Munkholt; Glarborg, Peter

    Propane oxidation at intermediate temperatures (500—900 K) and high pressure (100 bar) has been characterized by conducting experiments in a laminar flow reactor over a wide range of stoichiometries. The onset of fuel oxidation was found to be 600—725 K, depending on mixture stoichiometry...

  14. Surface-Controlled Metal Oxide Resistive Memory

    KAUST Repository

    Ke, Jr-Jian

    2015-10-28

    To explore the surface effect on resistive random-access memory (ReRAM), the impact of surface roughness on the characteristics of ZnO ReRAM were studied. The thickness-independent resistance and the higher switching probability of ZnO ReRAM with rough surfaces indicate the importance of surface oxygen chemisorption on the switching process. Furthermore, the improvements in switching probability, switching voltage and resistance distribution observed for ReRAM with rough surfaces can be attributed to the stable oxygen adatoms under various ambience conditions. The findings validate the surface-controlled stability and uniformity of ReRAM and can serve as the guideline for developing practical device applications.

  15. Resistive switching characteristics of gallium oxide for nonvolatile memory application

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Jyun-Bao [Department of Photonics, National Sun Yat-Sen University, Kaohsiung, Taiwan (China); Chang, Ting-Chang, E-mail: tcchang@mail.phys.nsysu.edu.tw [Department of Physics, National Sun Yat-Sen University, Kaohsiung, Taiwan (China); Department of Photonics, National Sun Yat-Sen University, Kaohsiung, Taiwan (China); Huang, Jheng-Jie; Chen, Shih-Ching [Department of Physics, National Sun Yat-Sen University, Kaohsiung, Taiwan (China); Yang, Po-Chun; Chen, Yu-Ting [Department of Photonics, National Sun Yat-Sen University, Kaohsiung, Taiwan (China); Tseng, Hsueh-Chih [Department of Physics, National Sun Yat-Sen University, Kaohsiung, Taiwan (China); Sze, Simon M. [Institute of Electronics, National Chiao Tung University, Hsin-Chu, Taiwan (China); Chu, Ann-Kuo [Department of Photonics, National Sun Yat-Sen University, Kaohsiung, Taiwan (China); Tsai, Ming-Jinn [Electronics and Optoelectronics Research Laboratory, Industrial Technology Research Institute, Chutung, Hsinchu, Taiwan (China)

    2013-02-01

    This study investigates bipolar resistance switching memory in a fabricated Pt/GaO{sub x}/TiN device. Gallium oxide sputtered in ambient Ar shows a change in resistance ratio of two orders of magnitude. The enhancement of resistance ratio is also observed in the gallium oxide layer when deposited in ambient Ar/O{sub 2}. The X-ray photoelectron spectroscopy analysis shows that this gallium oxide in ambient Ar/O{sub 2} can reduce the number of defects and enhance the stability of switching behavior. An analysis of current transport mechanism in the high resistance state indicates that the larger effective thickness can be attributed to the higher oxygen concentration, and can increase the resistance value of the high resistance state. - Highlights: ► Study on the switching mechanisms in a Pt/GaO{sub x}/TiN device ► Pt/GaO{sub x}/TiN exhibits bipolar resistive switching behavior. ► The bipolar behavior originates from conduction associated to oxygen vacancies. ► Additional oxygen can enhance the effective thickness.

  16. Effect of temperature on structure and corrosion resistance for ...

    Indian Academy of Sciences (India)

    corrosion resistance becomes lower. Probably, there is. Figure 6. Relationship between temperature and the natural cor- rosion potential of NiWP coating in the 3.5% NaCl solution. With the increase in the bath temperature, natural corrosion potential showed parabola change, increased first and then decreased, natural.

  17. Temperature influence and reset voltage study of bipolar resistive ...

    Indian Academy of Sciences (India)

    Moreover, the Cu/ZrO2/ATO device which the ZrO2 thin film annealed at 300 °C can be measured as resistive switching sweeps at 200, 100 and 50 K. It was found that the ratio of off/on reduced when the measured temperature decreased. When the - measurement temperature decreases, on decreases obviously ...

  18. Polarization-coupled tunable resistive behavior in oxide ferroelectric heterostructures

    Energy Technology Data Exchange (ETDEWEB)

    Gruverman, Alexei [Univ. of Nebraska, Lincoln, NE (United States); Tsymbal, Evgeny Y. [Univ. of Nebraska, Lincoln, NE (United States); Eom, Chang-Beom [Univ. of Wisconsin, Madison, WI (United States)

    2017-05-03

    This research focuses on investigation of the physical mechanism of the electrically and mechanically tunable resistive behavior in oxide ferroelectric heterostructures with engineered interfaces realized via a strong coupling of ferroelectric polarization with tunneling electroresistance and metal-insulator (M-I) transitions. This report describes observation of electrically conductive domain walls in semiconducting ferroelectrics, voltage-free control of resistive switching and demonstration of a new mechanism of electrical control of 2D electron gas (2DEG) at oxide interfaces. The research goals are achieved by creating strong synergy between cutting-edge fabrication of epitaxial single-crystalline complex oxides, nanoscale electrical characterization by scanning probe microscopy and theoretical modeling of the observed phenomena. The concept of the ferroelectric devices with electrically and mechanically tunable nonvolatile resistance represents a new paradigm shift in realization of the next-generation of non-volatile memory devices and low-power logic switches.

  19. High Temperature Resistant Exhaust Valve Spindle

    DEFF Research Database (Denmark)

    Bihlet, Uffe Ditlev

    of the engine, new high temperature alloys are required for a specific engine component, the exhaust valve spindle. Two alloys are used for an exhaust valve spindle; one for the bottom of the spindle, and one for the spindle seat. Being placed in the exhaust gas stream, combustion products such as V2O5 and Na2...

  20. Transport physics and device modeling of zinc oxide thin-film transistors. Pt. II: Contact Resistance in Short Channel Devices

    NARCIS (Netherlands)

    Torricelli, F.; Meijboom, J.R.; Smits, E.; Tripathi, A.K.; Gelinck, G.H.; Colalongo, L.; Kovacs-Vajna, Z.M.; Leeuw, D. de; Cantatore, E.

    2011-01-01

    Abstract—Short-channel zinc oxide (ZnO) thin-film transistors (TFTs) are investigated in a wide range of temperatures and bias conditions. Scaling down the channel length, the TFT performance is seriously affected by contact resistances, which depend on gate voltage and temperature. To account for

  1. The etiology of oxidative stress in insulin resistance

    Directory of Open Access Journals (Sweden)

    Samantha Hurrle

    2017-10-01

    Full Text Available Insulin resistance is a prevalent syndrome in developed as well as developing countries. It is the predisposing factor for type 2 diabetes mellitus, the most common end stage development of metabolic syndrome in the United States. Previously, studies investigating type 2 diabetes have focused on beta cell dysfunction in the pancreas and insulin resistance, and developing ways to correct these dysfunctions. However, in recent years, there has been a profound interest in the role that oxidative stress in the peripheral tissues plays to induce insulin resistance. The objective of this review is to focus on the mechanism of oxidative species generation and its direct correlation to insulin resistance, to discuss the role of obesity in the pathophysiology of this phenomenon, and to explore the potential of antioxidants as treatments for metabolic dysfunction.

  2. Oxidation resistance of iron and copper foils coated with reduced graphene oxide multilayers.

    Science.gov (United States)

    Kang, Dongwoo; Kwon, Jee Youn; Cho, Hyun; Sim, Jae-Hyoung; Hwang, Hyun Sick; Kim, Chul Su; Kim, Yong Jung; Ruoff, Rodney S; Shin, Hyeon Suk

    2012-09-25

    Protecting the surface of metals such as Fe and Cu from oxidizing is of great importance due to their widespread use. Here, oxidation resistance of Fe and Cu foils was achieved by coating them with reduced graphene oxide (rG-O) sheets. The rG-O-coated Fe and Cu foils were prepared by transferring rG-O multilayers from a SiO(2) substrate onto them. The oxidation resistance of these rG-O-coated metal foils was investigated by Raman spectroscopy, optical microscopy, and scanning electron microscopy after heat treatment at 200 °C in air for 2 h. The bare metal surfaces were severely oxidized, but the rG-O-coated metal surfaces were protected from oxidation. This simple solution process using rG-O is one advantage of the present study.

  3. Effect of coating density on oxidation resistance and Cr vaporization from solid oxide fuel cell interconnects

    DEFF Research Database (Denmark)

    Talic, Belma; Falk-Windisch, Hannes; Venkatachalam, Vinothini

    2017-01-01

    •Protective action of dense and porous spinel coatings on Crofer 22 APU was compared. •Reduction and re-oxidation produces denser coatings than heat treating in air only. •Coating density has minor influence on oxidation resistance at 800 °C in air. •Dense coating resulted in three times lower Cr...

  4. Temperature influence and reset voltage study of bipolar resistive ...

    Indian Academy of Sciences (India)

    Administrator

    switching phenomena like redox effects in the resistance changes, filament formation and the percolation of the defects in the oxide (Choi et al 2005; Waser 2009). Researchers have used several techniques to investigate the mechanism such as conductive atomic force micro- scopy (C-AFM), high resolution transmission ...

  5. [Resistance of nerve cells to oxidative injury].

    Science.gov (United States)

    Jovanović, Zorica; Jovanović, Svetlana

    2011-01-01

    Reactive oxygen species are particularly active in the brain and neuronal tissue, and they are involved in numerous cellular functions, including cell death and survival. A high metabolic rate and an abundant supply of the transition metals make the brain an ideal target for a free radical attack. In addition, the brain has a high susceptibility to oxidative stress due to the high lipid content and relatively lower regenerative capacity in comparison with other tissues. The neurons are more vulnerable to oxidative stress than other brain cell types. In addition to the two conventional enzymes, catalase and glutathione peroxidase, peroxiredoxins remove intracellular hydrogen peroxide by reducing it to water. The recent work increasingly supports the hypothesis that peroxiredoxins are not only antioxidant proteins, but they also play a role in cell signaling by controlling hydrogen peroxide and alkyl hydroperoxide levels. The accumulating evidence demonstrates that microglia can become deleterious and damage neurons. The overactivated microglia release reactive oxygen species that cause neuronal damage in neurodegenerative diseases. The defense of nerve cells against reactive oxygen species--mediated oxidative damage is essential for maintaining the functionality of nerve cells. The ongoing studies show that neuron-glial compartmentalization of antioxidants is critical for the neuronal signaling by hydrogen peroxide as well as the neuronal protection.

  6. The oxidation behavior of classical thermal barrier coatings exposed to extreme temperature

    Directory of Open Access Journals (Sweden)

    Alina DRAGOMIRESCU

    2017-03-01

    Full Text Available Thermal barrier coatings (TBC are designed to protect metal surfaces from extreme temperatures and improve their resistance to oxidation during service. Currently, the most commonly used systems are those that have the TBC structure bond coat (BC / top coat (TC layers. The top coat layer is a ceramic layer. Oxidation tests are designed to identify the dynamics of the thermally oxide layer (TGO growth at the interface of bond coat / top coat layers, delamination mechanism and the TBC structural changes induced by thermal conditions. This paper is a short study on the evolution of aluminum oxide protective layer along with prolonged exposure to the testing temperature. There have been tested rectangular specimens of metal super alloy with four surfaces coated with a duplex thermal barrier coating system. The specimens were microscopically and EDAX analyzed before and after the tests. In order to determine the oxide type, the samples were analyzed using X-ray diffraction. The results of the investigation are encouraging for future studies. The results show a direct relationship between the development of the oxide layer and long exposure to the test temperature. Future research will focus on changing the testing temperature to compare the results.

  7. High temperature heterogeneous reaction kinetics and mechanisms of tungsten oxidation

    Science.gov (United States)

    Sabourin, Justin L.

    Tungsten, which is a material used in many high temperature applications, is limited by its susceptibility to oxidation at elevated temperatures. Although tungsten has the highest melting temperature of any metal, at much lower temperatures volatile oxides are formed during oxidation with oxygen containing species. This differs from many heterogeneous oxidation reactions involving metals since most reactions form very stable oxides that have higher melting or boiling points than the pure metal (e.g., aluminum, iron). Understanding heterogeneous oxidation and vaporization processes may allow for the expansion and improvement of high temperature tungsten applications. In order to increase understanding of the oxidation processes of tungsten, there is a need to develop reaction mechanisms and kinetics for oxidation processes involving oxidizers and environmental conditions of interest. Tungsten oxidation was thoroughly studied in the past, and today there is a good phenomenological understanding of these processes. However, as the design of large scale systems increasingly relies on computer modeling there becomes a need for improved descriptions of chemical reactions. With the increase in computing power over the last several decades, and the development of quantum chemistry and physics theories, heterogeneous systems can be modeled in detail at the molecular level. Thermochemical parameters that may not be measured experimentally may now be determined theoretically, a tool that was previously unavailable to scientists and engineers. Additionally, chemical kinetic modeling software is now available for both homogeneous and heterogeneous reactions. This study takes advantage of these new theoretical tools, as well as a thermogravimetric (TG) flow reactor developed as part of this study to learn about mechanisms and kinetics of tungsten oxidation. Oxidizers of interest are oxygen (O2), carbon dioxide (CO 2), water (H2O), and other oxidizers present in combustion and

  8. Temperature effects on surface activity and application in oxidation ...

    Indian Academy of Sciences (India)

    Correspondingly, the CMC of CTAB-SDS decreases almost by half. The increase of surface activity of CTAB-SDS can be attributed to the relatively weak electrostatic interaction at high temperature, which is supported by the increase of solubility of CTAB-SDS with rise in temperature. Catalytic effect on oxidation of toluene ...

  9. High Temperature Strength of Oxide Dispersion Strengthened Aluminium

    DEFF Research Database (Denmark)

    Clauer, A.H.; Hansen, Niels

    1984-01-01

    The tensile flow stress of coarse-grained dispersion strengthened Al-Al2O3 materials were measured as a function of temperature (77–873 K) and volume fraction (0.19-0.92 vol.%) of aluminium oxide. For the same material, the creep strength was determined as a function of temperature in the range 573...

  10. Improving the phase stability and oxidation resistance of β-NiAl

    Energy Technology Data Exchange (ETDEWEB)

    Brammer, Travis [Iowa State Univ., Ames, IA (United States)

    2011-01-01

    High temperature alloys are essential to many industries that require a stable material to perform in harsh oxidative environments. Many of these alloys are suited for specific applications such as jet engine turbine blades where most other materials would either melt or oxidize and crumble (1). These alloys must have a high melting temperature, excellent oxidation resistance, good creep resistance, and decent fracture toughness to be successfully used in such environments. The discovery of Ni based superalloys in the 1940s revolutionized the high temperature alloy industry and there has been continued development of these alloys since their advent (2). These materials are capable of operating in oxidative environments in the presence of combustion gases, water vapor and at temperatures around 1050 C. Demands for increased f uel efficiency, however, has highlighted the need for materials that can be used under similar atmospheres and at temperatures in excess of 1200 C. The current Ni based superalloys are restricted to lower temperatures due to the presence of a number of low melting phases that result in softening of the alloys above 1000 C. Therefore, recent research has been aimed at exploring and developing newer alloy systems that can meet the escalating requirements. This thesis comprises a part of such an effort. The motivation of this work is to develop a novel high temperature alloy system that shows improved performance at higher temperatures than the currently employed alloys. The desired alloy should be in accordance with the requirements established in the National Energy Technology Laboratory (NETL) FutureGen program having an operating temperature around 1300 C. Alloys based on NiAl offer significant potential payoffs as structural materials in gas turbine applications due to a unique range of physical and mechanical properties. Alloying additions to NiAl could be used to further improve the pertinent properties that currently limit this system from

  11. Computational Chemistry of Cyclopentane Low Temperature Oxidation

    KAUST Repository

    El Rachidi, Mariam

    2015-03-30

    Cycloalkanes are significant constituents of conventional fossil fuels, but little is known concerning their combustion chemistry and kinetics, particularly at low temperatures. This study investigates the pressure dependent kinetics of several reactions occurring during low-temperature cyclopentane combustion using theoretical chemical kinetics. The reaction pathways of the cyclopentyl + O2 adduct is traced to alkylhydroperoxide, cyclic ether, β-scission and HO2 elimination products. The calculations are carried out at the UCCSD(T)-F12b/cc-pVTZ-F12//M06-2X/6-311++G(d,p) level of theory. The barrierless entrance channel is treated using variable-reaction-coordinate transition state theory (VRC-TST) at the CASPT2(7e,6o) level of theory, including basis set, geometry relaxation and ZPE corrections. 1-D time-dependent multiwell master equation analysis is used to determine pressure-and temperature-dependent rate parameters of all investigated reactions. Tunneling corrections are included using Eckart barriers. Comparison with cyclohexane is used to elucidate the effect of ring size on the low temperature reactivity of naphthenes. The rate coefficients reported herein are suitable for use in cyclopentane and methylcyclopentane combustion models, even below ~900 K, where ignition is particularly sensitive to these pressure-dependent values.

  12. Parasitic resistive switching uncovered from complementary resistive switching in single active-layer oxide memory device

    Science.gov (United States)

    Zhu, Lisha; Hu, Wei; Gao, Chao; Guo, Yongcai

    2017-12-01

    This paper reports the reversible transition processes between the bipolar and complementary resistive switching (CRS) characteristics on the binary metal-oxide resistive memory devices of Pt/HfO x /TiN and Pt/TaO x /TiN by applying the appropriate bias voltages. More interestingly, by controlling the amplitude of the negative bias, the parasitic resistive switching effect exhibiting repeatable switching behavior is uncovered from the CRS behavior. The electrical observation of the parasitic resistive switching effect can be explained by the controlled size of the conductive filament. This work confirms the transformation and interrelationship among the bipolar, parasitic, and CRS effects, and thus provides new insight into the understanding of the physical mechanism of the binary metal-oxide resistive switching memory devices.

  13. Mechanical properties and oxidation and corrosion resistance of reduced-chromium 304 stainless steel alloys

    Science.gov (United States)

    Stephens, J. R.; Barrett, C. A.; Gyorgak, C. A.

    1979-01-01

    An experimental program was undertaken to identify effective substitutes for part of the Cr in 304 stainless steel as a method of conserving the strategic element Cr. Although special emphasis was placed on tensile properties, oxidation and corrosion resistance were also examined. Results indicate that over the temperature range of -196 C to 540 C the yield stress of experimental austenitic alloys with only 12 percent Cr compare favorably with the 18 percent Cr in 304 stainless steel. Oxidation resistance and in most cases corrosion resistance for the experimental alloys were comparable to the commercial alloy. Effective substitutes for Cr included Al, Mo, Si, Ti, and V, while Ni and Mn contents were increased to maintain an austenitic structure.

  14. Permanent water swelling effect in low temperature thermally reduced graphene oxide

    Science.gov (United States)

    Papamatthaiou, S.; Argyropoulos, D.-P.; Masurkar, A.; Cavallari, M. R.; Farmakis, F.; Kymissis, I.; Georgoulas, N.

    2017-06-01

    We demonstrate permanent water trapping in reduced graphene oxide after high relative humidity exposure. For this purpose, we grew graphene oxide films via spin-coating on glass substrates followed by thermal reduction. The electrical resistance of the planar device was then measured. We observed that resistance is significantly increased after water vapor exposure and remains stable even after 250 days in ambient conditions. Various techniques were applied to desorb the water and decrease (recover) the material's resistance, but it was achieved only with low temperature thermal annealing (180 °C) under forming gas (H2/N2 mixture). The permanent effect of water absorption was also detected by x-ray photoelectron spectroscopy.

  15. Probability based high temperature engineering creep and structural fire resistance

    CERN Document Server

    Razdolsky, Leo

    2017-01-01

    This volume on structural fire resistance is for aerospace, structural, and fire prevention engineers; architects, and educators. It bridges the gap between prescriptive- and performance-based methods and simplifies very complex and comprehensive computer analyses to the point that the structural fire resistance and high temperature creep deformations will have a simple, approximate analytical expression that can be used in structural analysis and design. The book emphasizes methods of the theory of engineering creep (stress-strain diagrams) and mathematical operations quite distinct from those of solid mechanics absent high-temperature creep deformations, in particular the classical theory of elasticity and structural engineering. Dr. Razdolsky’s previous books focused on methods of computing the ultimate structural design load to the different fire scenarios. The current work is devoted to the computing of the estimated ultimate resistance of the structure taking into account the effect of high temperatur...

  16. Study on Zinc Oxide-Based Electrolytes in Low-Temperature Solid Oxide Fuel Cells.

    Science.gov (United States)

    Xia, Chen; Qiao, Zheng; Feng, Chu; Kim, Jung-Sik; Wang, Baoyuan; Zhu, Bin

    2017-12-28

    Semiconducting-ionic conductors have been recently described as excellent electrolyte membranes for low-temperature operation solid oxide fuel cells (LT-SOFCs). In the present work, two new functional materials based on zinc oxide (ZnO)-a legacy material in semiconductors but exceptionally novel to solid state ionics-are developed as membranes in SOFCs for the first time. The proposed ZnO and ZnO-LCP (La/Pr doped CeO₂) electrolytes are respectively sandwiched between two Ni 0.8 Co 0.15 Al 0.05 Li-oxide (NCAL) electrodes to construct fuel cell devices. The assembled ZnO fuel cell demonstrates encouraging power outputs of 158-482 mW cm -2 and high open circuit voltages (OCVs) of 1-1.06 V at 450-550 °C, while the ZnO-LCP cell delivers significantly enhanced performance with maximum power density of 864 mW cm -2 and OCV of 1.07 V at 550 °C. The conductive properties of the materials are investigated. As a consequence, the ZnO electrolyte and ZnO-LCP composite exhibit extraordinary ionic conductivities of 0.09 and 0.156 S cm -1 at 550 °C, respectively, and the proton conductive behavior of ZnO is verified. Furthermore, performance enhancement of the ZnO-LCP cell is studied by electrochemical impedance spectroscopy (EIS), which is found to be as a result of the significantly reduced grain boundary and electrode polarization resistances. These findings indicate that ZnO is a highly promising alternative semiconducting-ionic membrane to replace the electrolyte materials for advanced LT-SOFCs, which in turn provides a new strategic pathway for the future development of electrolytes.

  17. Influence of Cycle Temperature on the Wear Resistance of Vermicular Iron Derivatized with Bionic Surfaces

    Science.gov (United States)

    Sui, Qi; Zhang, Peng; Zhou, Hong; Liu, Yan; Ren, Luquan

    2016-11-01

    Depending on their applications, such as in brake discs, camshafts, etc., the wear behavior of vermicular iron is influenced by the thermal cycling regime. The failure of a working part during its service life is a consequence of both thermal fatigue and wear. Previously, the wear and thermal fatigue resistance properties of vermicular iron were separately investigated by researchers, rather than a study combining these two factors. In the present work, the effect of cycle temperature on the wear resistance of specimens with bionic units processed by laser has been investigated experimentally. The wear behavior pre- and post-thermal cycling has also been investigated, and the influence of different cycle temperatures on the wear resistance is discussed. The results indicate that the thermal cycling regime brought about negative influences with varying degrees, on the material properties, such as the microstructures, micro-hardness, cracks, and oxidation resistance properties. All these factors synergistically reduced the wear resistance of vermicular iron. In particular, the negative influence apparently increased with an increase in cycle temperature. Nevertheless, the post-thermal-cycle wear resistance of the specimens with bionic units was superior to those without bionic units. Hence, the laser bionic process is an effective way to improve the performance of vermicular iron in combined thermal cycling and wear service conditions.

  18. Oxide impurities in silicon oxide intermetal dielectrics and their potential to elevate via-resistances.

    Science.gov (United States)

    Qin, Wentao; Alldredge, Donavan; Heleotes, Douglas; Elkind, Alexander; Theodore, N David; Fejes, Peter; Vadipour, Mostafa; Godek, Bill; Lerner, Norman

    2014-08-01

    Silicon oxide used as an intermetal dielectric (IMD) incorporates oxide impurities during both its formation and subsequent processing to create vias in the IMD. Without a sufficient degassing of the IMD, oxide impurities released from the IMD during the physical vapor deposition (PVD) of the glue layer of the vias had led to an oxidation of the glue layer and eventual increase of the via resistances, which correlated with the O-to-Si atomic ratio of the IMD being ~10% excessive as verified by transmission electron microscopy (TEM) analysis. A vacuum bake of the IMD was subsequently implemented to enhance outgassing of the oxide impurities in the IMD before the glue layer deposition. The implementation successfully reduced the via resistances to an acceptable level.

  19. The realization of temperature controller for small resistance measurement system

    Science.gov (United States)

    Sobecki, Jakub; Walendziuk, Wojciech; Idzkowski, Adam

    2017-08-01

    This paper concerns the issues of construction and experimental tests of a temperature stabilization system for small resistance increments measurement circuits. After switching the system on, a PCB board heats up and the long-term temperature drift altered the measurement result. The aim of this work is reducing the time of achieving constant nominal temperature by the measurement system, which would enable decreasing the time of measurements in the steady state. Moreover, the influence of temperatures higher than the nominal on the measurement results and the obtained heating curve were tested. During the working process, the circuit heats up to about 32 °C spontaneously, and it has the time to reach steady state of about 1200 s. Implementing a USART terminal on the PC and an NI USB-6341 data acquisition card makes recording the data (concerning temperature and resistance) in the digital form and its further processing easier. It also enables changing the quantity of the regulator settings. This paper presents sample results of measurements for several temperature values and the characteristics of the temperature and resistance changes in time as well as their comparison with the output values. The object identification is accomplished due to the Ziegler-Nichols method. The algorithm of determining the step characteristics parameters and examples of computations of the regulator settings are included together with example characteristics of the object regulation.

  20. Oxidation behavior and area specific resistance of La, Cu and B alloyed Fe-22Cr ferritic steels for solid oxide fuel cell interconnects

    Science.gov (United States)

    Swaminathan, Srinivasan; Ko, Yoon Seok; Lee, Young-Su; Kim, Dong-Ik

    2017-11-01

    Two Fe-22 wt% Cr ferritic stainless steels containing varying concentrations of La (0.14 or 0.52 wt%), Cu (0.17 or 1.74 wt%) and B (48 or 109 ppm) are investigated with respect to oxidation behavior and high temperature area specific resistance (ASR) of the surface oxide scales. To determine the oxidation resistance of developed steels, continuous isothermal oxidation is carried out at 800 °C in air, for 2000 h, and their thermally grown oxide scale is characterized using dynamic SIMS, SEM/EDX, XRD and GI-XRD techniques. To assess their electrical performance, the ASR measurement by four-point probe method is conducted at 800 °C in air, for 400 h. In higher La content steel, the La-oxides at the scale/alloy interface promotes the oxygen transport which resulted in sub-surface oxidation of Mn, Cr, Ti and Al. Moreover, the inward growth of oxides contributes to increase of Fe-Cr alloy protrusions within the scale, which reduced the ASR. In contrast, sub-surface oxidation is reduced in high Cu-alloyed steel by segregated Cu at the scale/alloy interface. Thus, addition of Cu is effective to oxidation resistance and also to better electrical performance. However, no obvious impact of B on the scale sequence and/or ASR is observed.

  1. Vacuum-arc chromium-based coatings for protection of zirconium alloys from the high-temperature oxidation in air

    Energy Technology Data Exchange (ETDEWEB)

    Kuprin, A.S.; Belous, V.A.; Voyevodin, V.N., E-mail: voyev@kipt.kharkov.ua; Bryk, V.V.; Vasilenko, R.L.; Ovcharenko, V.D.; Reshetnyak, E.N.; Tolmachova, G.N.; V' yugov, P.N.

    2015-10-15

    Multilayer Cr–Zr/Cr/Cr–N coatings for protection of zirconium alloys from the high-temperature oxidation in air have been obtained by the vacuum-arc evaporation technique with application of filters for plasma cleaning from macroparticles. The effect of the coatings on the corrosion resistance of zirconium alloys at test temperatures between 660 and 1100 °C for 3600 s has been investigated. The thickness, structure, phase composition, mechanical properties of the coatings and oxide layers before and after oxidation tests were examined by scanning electron microscopy, X-ray diffraction analysis and nanoindentation technique. It is shown that the hard multilayer coating effectively protects zirconium from the oxidation in air for 1 h at test temperatures. As a result of the oxidation in the coating the CrO and Cr{sub 2}O{sub 3} oxides are formed which reduce the oxygen penetration through the coating. At maximum test temperature of 1100 °C the oxide layer thickness in the coating is about 5 μm. The tube shape remains unchanged independent of alloy type. It has been found that uncoated zirconium oxidizes rapidly throughout the temperature range under study. At 1100 °C a porous monoclinic ZrO{sub 2} oxide layer of ≥120 μm is formed that leads to the deformation of the samples, cracking and spalling of the oxide layer.

  2. Nanocarbon synthesis by high-temperature oxidation of nanoparticles

    Science.gov (United States)

    Nomura, Ken-Ichi; Kalia, Rajiv K.; Li, Ying; Nakano, Aiichiro; Rajak, Pankaj; Sheng, Chunyang; Shimamura, Kohei; Shimojo, Fuyuki; Vashishta, Priya

    2016-04-01

    High-temperature oxidation of silicon-carbide nanoparticles (nSiC) underlies a wide range of technologies from high-power electronic switches for efficient electrical grid and thermal protection of space vehicles to self-healing ceramic nanocomposites. Here, multimillion-atom reactive molecular dynamics simulations validated by ab initio quantum molecular dynamics simulations predict unexpected condensation of large graphene flakes during high-temperature oxidation of nSiC. Initial oxidation produces a molten silica shell that acts as an autocatalytic ‘nanoreactor’ by actively transporting oxygen reactants while protecting the nanocarbon product from harsh oxidizing environment. Percolation transition produces porous nanocarbon with fractal geometry, which consists of mostly sp2 carbons with pentagonal and heptagonal defects. This work suggests a simple synthetic pathway to high surface-area, low-density nanocarbon with numerous energy, biomedical and mechanical-metamaterial applications, including the reinforcement of self-healing composites.

  3. OTS Selective Bibliography. High Temperature Metallurgy and Heat Resistant Alloys

    Science.gov (United States)

    1961-02-01

    date have not shown appreciable IMPROVED SINTEED BRASS COMPACTS (Substantially oxidation resistance), by Raymond. Final rept. 19 higher properties were...iron), by Zaleski and Powell. a cubic phase of ZrO2 and Hf02 results. Refractory 1959. 25p. analogues of zircon have been prepared using IfO Order...from LC mi$2.70 ph$4 . 8 0 PB 142509 and ThN2 to replace Zr02. Hafnium silicate has exhibited unusually good resistance to severe Watertown Arsenal Labs

  4. Low temperature oxidation of hydrocarbons using an electrochemical reactor

    DEFF Research Database (Denmark)

    Ippolito, Davide

    at different reaction temperatures. The study of the effect of the infiltration of different electroactive materials on the electrode behavior has been carried on by the use of electrochemical impedance spectroscopy (EIS). Both the methods have been employed to understand the relationship between the catalytic...... the catalytic activity at open circuit voltage and the effect of polarization on propene oxidation rate at low temperature. The future development of this technology will see the infiltration of an active catalyst towards propene oxidation together with a NOx storage compound for the simultaneous oxidation...... high propene conversion at open circuit voltage together high rate enhancement ratio and faradaic efficiency values at low temperatures (300-350 °C). Although some stability problems affected the performance of multiple infiltrated Ce0.9Gd0.1O1.95 on LSM/CGO backbone, the strong activation of LSM upon...

  5. Activity of oxidizing processes in introduced plants under low hardening temperature

    Directory of Open Access Journals (Sweden)

    I. O. Zaitseva

    2011-10-01

    Full Text Available The peculiarities of oxidative enzymes’ activity at the dormancy phenological stage under conditions of low positive temperature were studied. Most effective methods (NPK, zircon growth regulator for enhancing the cold tolerance of the Swida, Deutzia, Buddleja and Hibiscus species have been determined. It has been established that activity of catalase and peroxidase depends on the cold adaptation of introduced arbo-real plants of different winter-resistance. The possibility to use the ratio of enzymatic activities Acold./Anorm. as a test-parameter in forecasting the winter-resistance of plants is displayed.

  6. The influence of modification of elastomer compositions in polyethylene oxides on their resistance to mineral oils

    Directory of Open Access Journals (Sweden)

    E. P. Uss

    2017-01-01

    Full Text Available The influence of modifying of elastomer compositions based on nitrile rubber in the medium of low molecular weight polyethylene oxide on resistance of rubbers to liquid aggressive mediawas studied. Standard hydrocarbon oils – oil ASTM №1 and ASTM №3, having a constant chemical composition and properties, were used as aggressive fluids. Resistance of elastomer compositions to standard oil was evaluated by change in weight, volume and relative compression set after keeping the samples in these oils at elevated temperatures. The influence of aggressive environment on the degree of swelling and the value of compression set of compositions modified in polyethylene oxides medium was established. It has been shown that the mass/volume of modified rubbers during aging in oil ASTM №1 reduced to a lesser degree compared to unmodified samples, which is probably due to the influence of low molecular weight polyethylene oxides for the formation of vulcanizates structure. At the same time exposure to oil ASTM №3 of elastomer compositions increases the degree of swelling of modified rubber more than unmodified, which can be due to destruction by the action of aggressive medium additional intermolecular bonds between macromolecules of polyethylene oxide and rubber, resulting in increased flexibility of the elastomeric matrix segments. It revealed that modification of rubbers in low molecular weightpolyethylene oxides facilitates preparation of rubber with low compression set after aging in standard oils at elevated temperatures.

  7. Improving superconducting properties of YBCO high temperature superconductor by Graphene Oxide doping

    Energy Technology Data Exchange (ETDEWEB)

    Dadras, S., E-mail: dadras@alzahra.ac.ir; Dehghani, S.; Davoudiniya, M.; Falahati, S.

    2017-06-01

    In this research, we report the synthesis and characterization of YBa{sub 2}Cu{sub 3}O{sub 7-δ} (YBCO) high temperature superconductor prepared by sol-gel method and doped with Graphene Oxide (GO) in different weight percentages, 0, 0.1, 0.7 and 1 % wt. The x-ray diffraction (XRD) analysis confirms the formation of orthorhombic phase of superconductivity for all the prepared samples. We found that GO doping reduces the crystalline size of the samples. We evaluated the effects of GO doping on the normal state resistivity (ρ), superconducting transition temperature (T{sub c}) and critical current density (J{sub c}). The results show that the GO doping has a positive effect on these properties. Also, the highest J{sub c} is obtained for the 0.7 %wt GO doped YBCO compound that its critical current density is about 15 times more than the J{sub c} of pure one in 0.4 T magnetic field. The scanning electron microscope (SEM) analysis shows that there are better connections between the grains of GO doped samples. - Highlights: • Graphene Oxide doping increased the YBCO critical current density. • Graphene Oxide creates a better connection between the YBCO grains. • The normal resistivity of samples were decreased by GO doping to YBCO compounds. • Graphene Oxide doping has a positive effect on the critical transition temperature.

  8. Low temperature ozone oxidation of solid waste surrogates

    Science.gov (United States)

    Nabity, James A.; Lee, Jeffrey M.

    2015-09-01

    Solid waste management presents a significant challenge to human spaceflight and especially, long-term missions beyond Earth orbit. A six-month mission will generate over 300 kg of solid wastes per crewmember that must be dealt with to eliminate the need for storage and prevent it from becoming a biological hazard to the crew. There are several methods for the treatment of wastes that include oxidation via ozone, incineration, microbial oxidation or pyrolysis and physical methods such as microwave drying and compaction. In recent years, a low temperature oxidation process using ozonated water has been developed for the chemical conversion of organic wastes to CO2 and H2O. Experiments were conducted to evaluate the rate and effectiveness with which ozone oxidized several different waste materials. Increasing the surface area by chopping or shredding the solids into small pieces more than doubled the rate of oxidation. A greater flow of ozone and agitation of the ozonated water system also increased processing rates. Of the materials investigated, plastics have proven the most difficult to oxidize. The processing of plastics above the glass transition temperatures caused the plastics to clump together which reduced the exposed surface area, while processing at lower temperatures reduced surface reaction kinetics.

  9. Platinum redispersion on metal oxides in low temperature fuel cells

    DEFF Research Database (Denmark)

    Tripkovic, Vladimir; Cerri, Isotta; Nagami, Tetsuo

    2013-01-01

    We have analyzed the aptitude of several metal oxide supports (TiO2, SnO2, NbO2, ZrO2, SiO2, Ta2O5 and Nb2O5) to redisperse platinum under electrochemical conditions pertinent to the Proton Exchange Membrane Fuel Cell (PEMFC) cathode. The redispersion on oxide supports in air has been studied...... in detail; however, due to different operating conditions it is not straightforward to link the chemical and the electrochemical environment. The largest differences reflect in (1) the oxidation state of the surface (the oxygen species coverage), (2) temperature and (3) the possibility of platinum...... dissolution at high potentials and the interference of redispersion with normal working potential of the PEMFC cathode. We have calculated the PtOx (x = 0, 1, 2) adsorption energies on different metal oxides' surface terminations as well as inside the metal oxides' bulk, and we have concluded that NbO2 might...

  10. Thin Films of Reduced Hafnium Oxide with Excess Carbon for High-Temperature Oxidation Protection

    Science.gov (United States)

    2010-02-01

    contamination; thus the higher oxygen content found by XPS is partly due to organic impurities (and, possibly, water ) that are mostly concentrated in the...International Service Award, 2007. 25 REFERENCES ’C. B. Bargeron, R. C. Benson, and A. N. Jette , "High-Temperature Diffusion of Oxygen in Oxidizing Hafnium...A. N. Jette , and T. E. Phillips, "Oxidation of Hafnium Carbide in the Temperature Range 1400 ° to 2060 °C," Journal of the American Ceramic Society

  11. Unraveling the Transcriptional Basis of Temperature-Dependent Pinoxaden Resistance in Brachypodium hybridum.

    Science.gov (United States)

    Matzrafi, Maor; Shaar-Moshe, Lidor; Rubin, Baruch; Peleg, Zvi

    2017-01-01

    Climate change endangers food security and our ability to feed the ever-increasing human population. Weeds are the most important biotic stress, reducing crop-plant productivity worldwide. Chemical control, the main approach for weed management, can be strongly affected by temperature. Previously, we have shown that temperature-dependent non-target site (NTS) resistance of Brachypodium hybridum is due to enhanced detoxification of acetyl-CoA carboxylase inhibitors. Here, we explored the transcriptional basis of this phenomenon. Plants were characterized for the transcriptional response to herbicide application, high-temperature and their combination, in an attempt to uncover the genetic basis of temperature-dependent pinoxaden resistance. Even though most of the variance among treatments was due to pinoxaden application (61%), plants were able to survive pinoxaden application only when grown under high-temperatures. Biological pathways and expression patterns of members of specific gene families, previously shown to be involved in NTS metabolic resistance to different herbicides, were examined. Cytochrome P450, glucosyl transferase and glutathione-S-transferase genes were found to be up-regulated in response to pinoxaden application under both control and high-temperature conditions. However, biological pathways related to oxidation and glucose conjugation were found to be significantly enriched only under the combination of pinoxaden application and high-temperature. Analysis of reactive oxygen species (ROS) was conducted at several time points after treatment using a probe detecting H2O2/peroxides. Comparison of ROS accumulation among treatments revealed a significant reduction in ROS quantities 24 h after pinoxaden application only under high-temperature conditions. These results may indicate significant activity of enzymatic ROS scavengers that can be correlated with the activation of herbicide-resistance mechanisms. This study shows that up-regulation of genes

  12. Unraveling the Transcriptional Basis of Temperature-Dependent Pinoxaden Resistance in Brachypodium hybridum

    Science.gov (United States)

    Matzrafi, Maor; Shaar-Moshe, Lidor; Rubin, Baruch; Peleg, Zvi

    2017-01-01

    Climate change endangers food security and our ability to feed the ever-increasing human population. Weeds are the most important biotic stress, reducing crop-plant productivity worldwide. Chemical control, the main approach for weed management, can be strongly affected by temperature. Previously, we have shown that temperature-dependent non-target site (NTS) resistance of Brachypodium hybridum is due to enhanced detoxification of acetyl-CoA carboxylase inhibitors. Here, we explored the transcriptional basis of this phenomenon. Plants were characterized for the transcriptional response to herbicide application, high-temperature and their combination, in an attempt to uncover the genetic basis of temperature-dependent pinoxaden resistance. Even though most of the variance among treatments was due to pinoxaden application (61%), plants were able to survive pinoxaden application only when grown under high-temperatures. Biological pathways and expression patterns of members of specific gene families, previously shown to be involved in NTS metabolic resistance to different herbicides, were examined. Cytochrome P450, glucosyl transferase and glutathione-S-transferase genes were found to be up-regulated in response to pinoxaden application under both control and high-temperature conditions. However, biological pathways related to oxidation and glucose conjugation were found to be significantly enriched only under the combination of pinoxaden application and high-temperature. Analysis of reactive oxygen species (ROS) was conducted at several time points after treatment using a probe detecting H2O2/peroxides. Comparison of ROS accumulation among treatments revealed a significant reduction in ROS quantities 24 h after pinoxaden application only under high-temperature conditions. These results may indicate significant activity of enzymatic ROS scavengers that can be correlated with the activation of herbicide-resistance mechanisms. This study shows that up-regulation of genes

  13. Oxidative stress, insulin resistance, dyslipidemia and type 2 diabetes mellitus

    Science.gov (United States)

    Tangvarasittichai, Surapon

    2015-01-01

    Oxidative stress is increased in metabolic syndrome and type 2 diabetes mellitus (T2DM) and this appears to underlie the development of cardiovascular disease, T2DM and diabetic complications. Increased oxidative stress appears to be a deleterious factor leading to insulin resistance, dyslipidemia, β-cell dysfunction, impaired glucose tolerance and ultimately leading to T2DM. Chronic oxidative stress, hyperglycemia and dyslipidemia are particularly dangerous for β-cells from lowest levels of antioxidant, have high oxidative energy requirements, decrease the gene expression of key β-cell genes and induce cell death. If β-cell functioning is impaired, it results in an under production of insulin, impairs glucose stimulated insulin secretion, fasting hyperglycemia and eventually the development of T2DM. PMID:25897356

  14. Effect of the graphene oxide reduction temperature on supercapacitor performance

    Science.gov (United States)

    Choi, Eunmi; Kim, Jaekwang; Cui, Yinhua; Choi, Kyuho; Gao, Yuan; Han, Seunghee; Pyo, Sung Gyu; Yoon, Songhun

    2017-07-01

    In this study, we investigated the influence of the reduction temperature on graphene oxide. After performing the thermal reduction at specific temperatures (200, 600, and 1000 °C), the morphological and crystallographic changes were investigated by several analysis methods. The reduced graphene oxides were used as supercapacitor electrodes and analyzed with various electrochemical techniques. The capacitance exhibited an increase up to 600 °C before decreasing abruptly at 1000 °C. This behavior was ascribed to the limited ionic accessibility into the compact graphene layer.[Figure not available: see fulltext.

  15. The oxidation behavior of SiC sintered with Al-B-C and improved oxidation resistance via heat treatments

    Energy Technology Data Exchange (ETDEWEB)

    Sixta, Mark [Univ. of California, Berkeley, CA (United States). Dept. of Materials Science and Mineral Engineering

    1997-12-01

    The oxidation behavior of high strength and high toughness SiC, sintered with Al, B, and C (ABC-SiC), was examined. Kinetic data were acquired and the parabolic rate constant for oxidation was determined and compared with literature data on various SiC materials. The role of secondary phases on the oxide morphology was explored. ABC-SiC was compared to commercially available SiC, Hexoloy, and SiC sintered with 10% yttrium aluminum garnet (YAG). Two-step sintering (pre-coarsening) was employed with holds for 48 hours at 600-1,600°C, prior to the typical hot-pressing conditions of 1,900°C for 1 hour, to change the chemistry and reduce the number of bubbles in the silica scale. The effects on the oxide thickness and integrity was examined as a function of the precoarsening heat treatment temperature. Additionally, the hot-pressed ABC-SiC was subjected to heat treatments (anneals) at 1,800°C for 1 hour in nitrogen, Ar, and vacuum environments, and the effects on subsequent oxidation were evaluated. The Ar and vacuum heat treatments dramatically improved the oxidation resistance of ABC-SiC. Finally, reoxidation experiments were performed to try to alter the surface chemistry of the SiC to improve the oxidation resistance. The four-point bend strengths and two-parameter Weibull plots of the most successful heat treatments were compared with the standard ABC-SiC to ensure that significant degradation did not result from altering the processing of the material.

  16. Raman and XPS characterization of vanadium oxide thin films with temperature

    Energy Technology Data Exchange (ETDEWEB)

    Ureña-Begara, Ferran, E-mail: ferran.urena@uclouvain.be [Université catholique de Louvain, Institute of Information and Communication Technologies, Electronics and Applied Mathematics (ICTEAM), Louvain-la-Neuve (Belgium); Crunteanu, Aurelian [XLIM Research Institute, UMR 7252, CNRS/Université de Limoges, Limoges (France); Raskin, Jean-Pierre [Université catholique de Louvain, Institute of Information and Communication Technologies, Electronics and Applied Mathematics (ICTEAM), Louvain-la-Neuve (Belgium)

    2017-05-01

    Highlights: • Comprehensive study of the oxidation of VO{sub 2} thin films from R.T. up to 550 °C. • Phase changes and mixed-valence vanadium oxides formed during the oxidation process. • Reported Raman and XPS signatures for each vanadium oxide. • Monitoring of the current and resistance evolution at the surface of the films. • Oxidation model describing the evolution of the vanadium oxides and phase changes. - Abstract: The oxidation mechanisms and the numerous phase transitions undergone by VO{sub 2} thin films deposited on SiO{sub 2}/Si and Al{sub 2}O{sub 3} substrates when heated from room temperature (R.T.) up to 550 °C in air are investigated by Raman and X-ray photoelectron spectroscopy. The results show that the films undergo several intermediate phase transitions between the initial VO{sub 2} monoclinic phase at R.T. and the final V{sub 2}O{sub 5} phase at 550 °C. The information about these intermediate phase transitions is scarce and their identification is important since they are often found during the synthesis of vanadium dioxide films. Significant changes in the film conductivity have also been observed to occur associated to the phase transitions. In this work, current and resistance measurements performed on the surface of the films are implemented in parallel with the Raman measurements to correlate the different phases with the conductivity of the films. A model to explain the oxidation mechanisms and phenomena occurring during the oxidation of the films is proposed. Peak frequencies, full-width half-maxima, binding energies and oxidation states from the Raman and X-ray photoelectron spectroscopy experiments are reported and analyzed for all the phases encountered in VO{sub 2} films prepared on SiO{sub 2}/Si and Al{sub 2}O{sub 3} substrates.

  17. Conductive One- and Two-Dimensional Structures Fabricated Using Oxidation-Resistant Cu-Sn Particles.

    Science.gov (United States)

    Liang, Yujia; Hou, Huilong; Yang, Yong; Glicksman, Howard; Ehrman, Sheryl

    2017-10-11

    Cu-Sn powders are promising alternatives to Ag and Au in applications including printed electronics because of their low cost and high oxidation resistance. Further development requires knowledge of the conductivity of their corresponding one- and two-dimensional structures. Herein, CuSny (y = atom ratio of Sn/Cu) wires and films were produced by direct printing. In situ measurements of structural resistivities with variation of the temperature from 2 to 400 K in oxygen-free conditions revealed that CuSn0.1 wires have resistivities comparable to those of Cu wires. Furthermore, CuSn0.1 films exhibited significantly lower resistivity increases after being heated at 573 K in ambient air, compared with Cu films.

  18. Bipolar Switching Properties of Neodymium Oxide RRAM Devices Using by a Low Temperature Improvement Method

    Directory of Open Access Journals (Sweden)

    Kai-Huang Chen

    2017-12-01

    Full Text Available Bipolar resistive switching properties and endurance switching behavior of the neodymium oxide (Nd2O3 thin films resistive random access memory (RRAM devices for a high resistive status/low resistive status (HRS/LRS using a low temperature supercritical carbon dioxide fluid (SCF improvement post-treatment process were investigated. Electrical and physical properties improvement of Nd2O3 thin films were measured by X-ray diffraction (XRD, scanning electron microscopy (SEM, X-ray photoelectron spectroscopy (XPS, and current versus voltage (I-V measurement. The metal-like behavior of ohmic conduction mechanism and metallic cluster reaction of hopping conduction mechanism in initial metallic filament path forming process of the SCF-treated thin films RRAM devices was assumed and discussed. Finally, the electrical conduction mechanism of the thin films RRAM derives for set/reset was also discussed and verified in filament path physical model.

  19. Fast temperature programming in gas chromatography using resistive heating

    NARCIS (Netherlands)

    Dallüge, J.; Ou-Aissa, R.; Vreuls, J.J.; Brinkman, U.A.T.; Veraart, J.R.

    1999-01-01

    The features of a resistive-heated capillary column for fast temperature-programmed gas chromatography (GC) have been evaluated. Experiments were carried out using a commercial available EZ Flash GC, an assembly which can be used to upgrade existing gas chromatographs. The capillary column is placed

  20. Stability of soybean aphid resistance in soybean across different temperatures

    Science.gov (United States)

    The soybean aphid, Aphis glycines Matsumura, is the most important insect pest posing a threat to soybean, Glycine max (L.) Merr., grain production in the United States. Soybean cultivars with resistance are currently being deployed to aid in management of the pest. Temperature has been reported to ...

  1. Physical and chemical mechanisms in oxide-based resistance random access memory.

    Science.gov (United States)

    Chang, Kuan-Chang; Chang, Ting-Chang; Tsai, Tsung-Ming; Zhang, Rui; Hung, Ya-Chi; Syu, Yong-En; Chang, Yao-Feng; Chen, Min-Chen; Chu, Tian-Jian; Chen, Hsin-Lu; Pan, Chih-Hung; Shih, Chih-Cheng; Zheng, Jin-Cheng; Sze, Simon M

    2015-01-01

    In this review, we provide an overview of our work in resistive switching mechanisms on oxide-based resistance random access memory (RRAM) devices. Based on the investigation of physical and chemical mechanisms, we focus on its materials, device structures, and treatment methods so as to provide an in-depth perspective of state-of-the-art oxide-based RRAM. The critical voltage and constant reaction energy properties were found, which can be used to prospectively modulate voltage and operation time to control RRAM device working performance and forecast material composition. The quantized switching phenomena in RRAM devices were demonstrated at ultra-cryogenic temperature (4K), which is attributed to the atomic-level reaction in metallic filament. In the aspect of chemical mechanisms, we use the Coulomb Faraday theorem to investigate the chemical reaction equations of RRAM for the first time. We can clearly observe that the first-order reaction series is the basis for chemical reaction during reset process in the study. Furthermore, the activation energy of chemical reactions can be extracted by changing temperature during the reset process, from which the oxygen ion reaction process can be found in the RRAM device. As for its materials, silicon oxide is compatible to semiconductor fabrication lines. It is especially promising for the silicon oxide-doped metal technology to be introduced into the industry. Based on that, double-ended graphene oxide-doped silicon oxide based via-structure RRAM with filament self-aligning formation, and self-current limiting operation ability is demonstrated. The outstanding device characteristics are attributed to the oxidation and reduction of graphene oxide flakes formed during the sputter process. Besides, we have also adopted a new concept of supercritical CO2 fluid treatment to efficiently reduce the operation current of RRAM devices for portable electronic applications.

  2. Ambient temperature NO oxidation over Cr-based amorphous mixed oxide catalysts: effects from the second oxide components

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Aiyong; Lin, Bo; Zhang, Hanlei; Engelhard, Mark H.; Guo, Yanglong; Lu, Guanzhong; Peden, Charles HF; Gao, Feng

    2017-01-01

    Three series of Cr-based mixed oxides (Cr-Co, Cr-Fe, and Cr-Ni oxides) with high specific surface areas and amorphous textures were synthesized using a novel sol-gel method. These mixed oxides, in comparison to their pure metal oxide (CrOx, Co3O4, FeOx and NiO) counterparts, display enhanced performance for catalytic oxidation of low-concentration NO at room temperature. The best performing catalysts achieve 100% NO conversion for ~30 h of operation at a high space velocity of 45,000 ml g-1 h-1. The amorphous structure was found to be critical for these catalysts to maintain high activity and durability. Control of Cr/M (M=Co, Fe and Ni) molar ratio, nitrate precursor decomposition temperature and catalyst calcination temperature was key to the synthesis of these highly active catalysts.

  3. Evaluating resist degradation during reactive ion oxide etching using 193 nm model resist formulations

    Science.gov (United States)

    May, M. J.; Mortini, B.; Sourd, C.; Perret, D.; Chung, D. W.; Barclay, G.; Brochon, C.; Hadziioannou, G.

    2006-03-01

    The weaker etch resistance of 193 nm resists1 is raising questions concerning their usability for the coming nodes as a single layer resist. We have found that 193 nm positive tone resists, that have been designed2 incorporating etch resistant groups like adamantyl or isobornyl 3-7, exhibit chemical modifications concerning these grafted functions while undergoing an oxide etch step. Previously performed experiments have pointed out that the photoacid generator (PAG) that is still contained in the unexposed regions of the sacrificial layer might be a reason for the modifications in the chemical buildup of this resists. Therefore, this work has focused on evaluating the impact of reactive ion oxide etching 8-10 on 193nm materials, for positive and negative tone chemically amplified resists. We used Thermo Gravimetric Analysis (TGA), Fourier Transformed Infra Red Spectroscopy (FTIR) and Atomic Force Microscopy (AFM) in order to check model formulations based on PHS, methacrylate or cyclic olefin polymers with various protecting groups having different activation energies and formulated with or without PAG and in order to understand the impact of the photoactive compound in the resist degradation behavior during plasma etch.

  4. Experimental Research on High Temperature Resistance of Modified Lightweight Concrete after Exposure to Elevated Temperatures

    OpenAIRE

    Ke-cheng He; Rong-xin Guo; Qian-min Ma; Feng Yan; Zhi-wei Lin; Yan-Lin Sun

    2016-01-01

    In order to improve the spalling resistance of lightweight aggregate concrete at high temperature, two types of modified materials were used to modify clay ceramsite lightweight aggregates by adopting the surface coating modification method. Spalling of the concrete specimens manufactured by using the modified aggregates was observed during a temperature elevation. Mass loss and residual axial compressive strength of the modified concrete specimens after exposure to elevated temperatures were...

  5. Temperature measurement method using temperature coefficient timing for resistive or capacitive sensors

    Science.gov (United States)

    Britton, Jr., Charles L.; Ericson, M. Nance

    1999-01-01

    A method and apparatus for temperature measurement especially suited for low cost, low power, moderate accuracy implementation. It uses a sensor whose resistance varies in a known manner, either linearly or nonlinearly, with temperature, and produces a digital output which is proportional to the temperature of the sensor. The method is based on performing a zero-crossing time measurement of a step input signal that is double differentiated using two differentiators functioning as respective first and second time constants; one temperature stable, and the other varying with the sensor temperature.

  6. Strategies for Lowering Solid Oxide Fuel Cells Operating Temperature

    Directory of Open Access Journals (Sweden)

    Albert Tarancón

    2009-11-01

    Full Text Available Lowering the operating temperature of solid oxide fuel cells (SOFCs to the intermediate range (500–700 ºC has become one of the main SOFC research goals. High operating temperatures put numerous requirements on materials selection and on secondary units, limiting the commercial development of SOFCs. The present review first focuses on the main effects of reducing the operating temperature in terms of materials stability, thermo-mechanical mismatch, thermal management and efficiency. After a brief survey of the state-of-the-art materials for SOFCs, attention is focused on emerging oxide-ionic conductors with high conductivity in the intermediate range of temperatures with an introductory section on materials technology for reducing the electrolyte thickness. Finally, recent advances in cathode materials based on layered mixed ionic-electronic conductors are highlighted because the decreasing temperature converts the cathode into the major source of electrical losses for the whole SOFC system. It is concluded that the introduction of alternative materials that would enable solid oxide fuel cells to operate in the intermediate range of temperatures would have a major impact on the commercialization of fuel cell technology.

  7. Transparent bipolar resistive switching memory on a flexible substrate with indium-zinc-oxide electrodes

    Science.gov (United States)

    Yeom, Seung-Won; Ha, Hyeon Jun; Park, Junsu; Shim, Jae Won; Ju, Byeong-Kwon

    2016-12-01

    We fabricated transparent indium zinc oxide (IZO)/TiO2/IZO devices on flexible polyethylene phthalate (PET) substrates. These devices demonstrate bipolar resistive switching behavior, exhibit a transmittance greater than 80 % for visible light, and have stable resistive switching properties, including long retention and good endurance. In addition, the devices were investigated based on their temperature dependence; the results show metallic properties in the low-resistance state (LRS) and semiconducting properties in the high-resistance state (HRS). The conduction mechanism for resistive switching in our device was well-fitted with Ohmic conduction in the LRS and Poole-Frenkel emission in the HRS. The mechanism could be explained by the formation and the rupture of the conduction paths formed by the movement of oxygen ions and vacancies. Moreover, acute bending of the devices did not affect the memory characteristics because of the pliability of both the IZO electrodes and the thin oxide layer. These results indicate potential applications as resistive random access memories in future flexible, transparent electronic devices.

  8. Decomposition of nitrous oxide at medium temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Loeffler, G.; Wargadalam, V.J.; Winter, F.; Hofbauer, H.

    2000-03-01

    Flow reactor experiments were done to study the decomposition of N{sub 2}O at atmospheric pressure and in a temperature range of 600--1,000 C. Dilute mixtures of N{sub 2}O with H{sub 2}, CH{sub 4}, CO with and without oxygen with N{sub 2} as carrier gas were studied. To see directly the relative importance of the thermal decomposition versus the destruction by free radicals (i.e.: H, O, OH) iodine was added to the reactant mixture suppressing the radicals' concentrations towards their equilibrium concentrations. The experimental results were discussed using a detailed chemistry model. This work shows that there are still some uncertainties regarding the kinetics of the thermal decomposition and the reaction between N{sub 2}O and the O radical. Using the recommendations applied in this work for the reaction N{sub 2}O + M {leftrightarrow} N{sub 2} + O + M and for N{sub 2}O + O {leftrightarrow} products, a good agreement with the experimental data can be obtained over a wide range of experimental conditions. The reaction between N{sub 2}O and OH is of minor importance under present conditions as stated in latest literature. The results show that N{sub 2}O + H {leftrightarrow} N{sub 2} + OH is the most important reaction in the destruction of N{sub 2}O. In the presence of oxygen it competes with H + O{sub 2} + M {leftrightarrow} HO{sub 2} + M and H + O{sub 2} {leftrightarrow} O + OH, respectively. The importance of the thermal decomposition (N{sub 2}O + M {leftrightarrow} N{sub 2} + O + M) increases with residence time. Reducing conditions and a long residence time lead to a high potential in N{sub 2}O reduction. Especially mixtures of H{sub 2}/N{sub 2}O and CO/H{sub 2}O/N{sub 2}O in nitrogen lead to a chain reaction mechanism causing a strong N{sub 2}O reduction.

  9. New Cathode Materials for Intermediate Temperature Solid Oxide Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    Allan J. Jacobson

    2006-09-30

    Operation of SOFCs at intermediate temperatures (500-800 C) requires new combinations of electrolyte and electrode materials that will provide both rapid ion transport across the electrolyte and electrode-electrolyte interfaces and efficient electrocatalysis of the oxygen reduction and fuel oxidation reactions. This project concentrates on materials and issues associated with cathode performance that are known to become limiting factors as the operating temperature is reduced. The specific objectives of the proposed research are to develop cathode materials that meet the electrode performance targets of 1.0 W/cm{sup 2} at 0.7 V in combination with YSZ at 700 C and with GDC, LSGM or bismuth oxide based electrolytes at 600 C. The performance targets imply an area specific resistance of {approx}0.5 {Omega}cm{sup 2} for the total cell. The research strategy is to investigate both established classes of materials and new candidates as cathodes, to determine fundamental performance parameters such as bulk diffusion, surface reactivity and interfacial transfer, and to couple these parameters to performance in single cell tests. The initial choices for study were perovskite oxides based on substituted LaFeO{sub 3} (P1 compositions), where significant data in single cell tests exist at PNNL for example, for La{sub 0.8}Sr{sub 0.2}FeO{sub 3} cathodes on both YSZ and CSO/YSZ. The materials selection was then extended to La{sub 2}NiO{sub 4} compositions (K1 compositions), and then in a longer range task we evaluated the possibility of completely unexplored group of materials that are also perovskite related, the ABM{sub 2}O{sub 5+{delta}}. A key component of the research strategy was to evaluate for each cathode material composition, the key performance parameters, including ionic and electronic conductivity, surface exchange rates, stability with respect to the specific electrolyte choice, and thermal expansion coefficients. In the initial phase, we did this in parallel with

  10. High temperature cyclic oxidation and hot corrosion behaviours of ...

    Indian Academy of Sciences (India)

    Administrator

    Abstract. Oxidation and hot corrosion are serious problems in aircraft, marine, industrial, and land-base gas turbines. It is because of the usage of wide range of fuels coupled with increased operating temperatures, which leads to the degradation of turbine engines. To obviate these problems, superalloys, viz. Superni 75,.

  11. Temperature dependence studies on the electro-oxidation of ...

    Indian Academy of Sciences (India)

    Cyclic voltammetry; electrochemical impedance spectroscopy; activation energy; fuel cell; alcohol. Abstract. Temperature dependence on the electro-oxidation of methanol, ethanol and 1-propanol in 0.5 M H2SO4 were investigated with Pt and PtRu electrodes. Tafel slope and apparent activation energy were evaluated ...

  12. Temperature dependence studies on the electro-oxidation of ...

    Indian Academy of Sciences (India)

    Administrator

    agreed that the electro-oxidation of methanol was improved by raising the temperature and ruthenium modification. Keywords. Cyclic voltammetry; electrochemical impedance spectroscopy; activation energy; fuel cell; alcohol. 1. Introduction. The use of hydrogen carrier like alcohol as alterna- tive fuels in the direct alcohol ...

  13. High temperature cyclic oxidation and hot corrosion behaviours of ...

    Indian Academy of Sciences (India)

    Oxidation and hot corrosion are serious problems in aircraft, marine, industrial, and land-base gas turbines. It is because of the usage of wide range of fuels coupled with increased operating temperatures, which leads to the degradation of turbine engines. To obviate these problems, superalloys, viz. Superni 75, Superni ...

  14. Electrical characterization of low temperature deposited oxide films ...

    Indian Academy of Sciences (India)

    Unknown

    Thin films of silicon dioxide are deposited on ZnO/n-Si substrate at a low temperature using tetra- ethylorthosilicate (TEOS). The ZnO/n-Si ... oxygen plasma has been extensively investigated because of its wide ranging applications in ... rapid electrical communication with the ZnO/n-Si sub- strate, whereas the oxide trapped ...

  15. Room temperature transparent conducting oxides based on zinc oxide thin films

    Energy Technology Data Exchange (ETDEWEB)

    Clatot, J. [Laboratoire de Reactivite et de Chimie des Solides, UMR CNRS 6007, 33, rue Saint-Leu, 80039 Amiens (France); Campet, G. [Institut de Chimie de la Matiere Condensee de Bordeaux (ICMCB), CNRS, 87 Avenue du Docteur A. Schweitzer, 33608 Pessac Cedex (France); Zeinert, A. [Laboratoire de Physique de la Matiere Condensee, Universite de Picardie Jules Verne, 33 rue St. Leu, 80039, Amiens (France); Labrugere, C. [Institut de Chimie de la Matiere Condensee de Bordeaux (ICMCB), CNRS, 87 Avenue du Docteur A. Schweitzer, 33608 Pessac Cedex (France); Rougier, A., E-mail: aline.rougier@u-picardie.fr [Laboratoire de Reactivite et de Chimie des Solides, UMR CNRS 6007, 33, rue Saint-Leu, 80039 Amiens (France)

    2011-04-01

    Doped zinc oxide thin films are grown on glass substrate at room temperature under oxygen atmosphere, using pulsed laser deposition (PLD). O{sub 2} pressure below 1 Pa leads to conductive films. A careful characterization of the film stoichiometry and microstructure using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) concludes on a decrease in crystallinity with Al and Ga additions ({<=}3%). The progressive loss of the (0 0 2) orientation is associated with a variation of the c parameter value as a function of the film thickness and substrate nature. ZnO:Al and ZnO:Ga thin films show a high optical transmittance (>80%) with an increase in band gap from 3.27 eV (pure ZnO) to 3.88 eV and 3.61 eV for Al and Ga doping, respectively. Optical carrier concentration, optical mobility and optical resistivity are deduced from simulation of the optical data.

  16. High temperature oxidation and electrochemical studies on novel co-base superalloys

    Energy Technology Data Exchange (ETDEWEB)

    Klein, Leonhard

    2013-02-27

    Isothermal oxidation in air was carried out on novel γ'-strengthened Cobalt-base superalloys of the system Co-Al-W-B. After fast initial oxide formation, a multi-layered structure establishes, consisting of an outer cobalt oxide layer, a middle spinel-containing layer, and an inner Al{sub 2}O{sub 3}-rich region. Ion diffusion in outward direction is hindered by the development of Al{sub 2}O{sub 3}, that can be either present as a continuous and protective layer or as a discontinuous Al{sub 2}O{sub 3}-rich area without comparable protective effect. Furthermore, high temperature oxidation leads to phase transformation (from γ/γ' into γ/Co{sub 3}W) at the alloy/oxide layer interface due to aluminium depletion. Pure cobalt and ternary Co-Al-W alloys exhibit parabolic oxide growth due to the lack or insufficient amounts of protective oxides, whereas quaternary Co-Al-W-B alloys possess sub-parabolic oxidation behaviour (at 900 C). At lower temperatures (800 C), even a blockage of further oxidation can be observed. High amounts of B (0.12 at%) significantly improve oxidation resistance mainly due to its beneficial effect on inner Al{sub 2}O{sub 3}-formation at the alloy/oxide interface. Furthermore, B prevents decohesion of high temperature scales due to the formation of B-rich phases (presumably tungsten borides) in the middle oxide layer. Appropriate amounts of chromium (8 at%) as additional alloying element to Co-Al-W-B alloys lead to the formation of an inner duplex layer composed of protective Cr{sub 2}O{sub 3} and Al{sub 2}O{sub 3} phases. In this respect, chromium also benefits selective oxidation of aluminium, which results in higher Al{sub 2}O{sub 3}-contents compared to chromium-free alloys. Major drawbacks of chromium additions are, on the one hand, the formation of volatile chromium-containing species at temperatures exceeding 1000 C and on the other hand, the instability of the γ/γ'-microstructure. Titanium and silicon additions lead to

  17. Electrochemical topotactic oxidation of nonstoichiometric perovskites at ambient temperature

    Energy Technology Data Exchange (ETDEWEB)

    Nemudry, A. [Institute of Solid State Chemistry and Mechanochemistry, Siberian Branch of Russian Academy of Science, Novosibirsk (Russian Federation); Goldberg, E.L. [Limnological Institute, Russian Academy of Science, Irkutsk (Russian Federation); Aguirre, M.; Alario-Franco, M.A. [Universidad Complytense, Lab. de Quimica del Estado Solido, Madrid (Spain)

    2002-05-01

    Different approaches to describe nonstoichiometry in perovskite-related oxides, oxygen diffusion models and kinetic data on electrochemical intercalation of oxygen in perovskite-related oxides are considered in the present study. It is demonstrated that the formation of micro-heterogeneous systems is characteristic of nonstoichiometric perovskite-related oxides. The adequate models should be considered for the proper characterization of the low temperature oxygen transport in oxides. These models should account for the high concentration of the high diffusivity paths in the sample. For micro-domain textured Ca{sub 0.5}Sr{sub 0.5}FeO{sub 2.5} perovskite as example, the kinetic analysis of electrochemical oxygen intercalation is carried out. (authors)

  18. Carbon-Starvation Induces Cross-Resistance to Thermal, Acid, and Oxidative Stress in Serratia marcescens

    Science.gov (United States)

    Pittman, Joseph R.; Kline, La’Kesha C.; Kenyon, William J.

    2015-01-01

    The broad host-range pathogen Serratia marcescens survives in diverse host and non-host environments, often enduring conditions in which the concentration of essential nutrients is growth-limiting. In such environments, carbon and energy source starvation (carbon-starvation) is one of the most common forms of stress encountered by S. marcescens. Related members of the family Enterobacteriaceae are known to undergo substantial changes in gene expression and physiology in response to the specific stress of carbon-starvation, enabling non-spore-forming cells to survive periods of prolonged starvation and exposure to other forms of stress (i.e., starvation-induced cross-resistance). To determine if carbon-starvation also results in elevated levels of cross-resistance in S. marcescens, both log-phase and carbon-starved cultures, depleted of glucose before the onset of high cell-density stationary-phase, were grown in minimal media at either 30 °C or 37 °C and were then challenged for resistance to high temperature (50 °C), low pH (pH 2.8), and oxidative stress (15 mM H2O2). In general, carbon-starved cells exhibited a higher level of resistance to thermal stress, acid stress, and oxidative stress compared to log-phase cells. The extent of carbon-starvation-induced cross-resistance was dependent on incubation temperature and on the particular strain of S. marcescens. In addition, strain- and temperature-dependent variations in long-term starvation survival were also observed. The enhanced stress-resistance of starved S. marcescens cells could be an important factor in their survival and persistence in many non-host environments and within certain host microenvironments where the availability of carbon sources is suboptimal for growth. PMID:27682115

  19. Transparent conductive zinc-oxide-based films grown at low temperature by mist chemical vapor deposition

    Energy Technology Data Exchange (ETDEWEB)

    Shirahata, Takahiro [New Energy and Environmental Business Division, Toshiba Mitsubishi-Electric Industrial Systems Corporation, Kobe International Business Center (KIBC) 509, 5-5-2 Minatojima-Minami, Chuo-Ku, Kobe 650-0047 (Japan); Kawaharamura, Toshiyuki [Research Institute, Kochi University of Technology, Kami, Kochi 780-8502 (Japan); School of Systems Engineering, Kochi University of Technology, Kami, Kochi 780-8502 (Japan); Fujita, Shizuo, E-mail: fujitasz@kuee.kyoto-u.ac.jp [Photonics and Electronics Science and Engineering Center, Kyoto University, Katsura, Nishikyo-ku, Kyoto 615-8520 (Japan); Orita, Hiroyuki [New Energy and Environmental Business Division, Toshiba Mitsubishi-Electric Industrial Systems Corporation, Kobe International Business Center (KIBC) 509, 5-5-2 Minatojima-Minami, Chuo-Ku, Kobe 650-0047 (Japan)

    2015-12-31

    Atmospheric pressure mist chemical vapor deposition (Mist–CVD) systems have been developed to grow zinc-oxide-based (ZnO-based) transparent conductive oxide (TCO) films. Low-resistive aluminum-doped ZnO (AZO) TCOs, showing resistivity of the order on 10{sup −4} Ωcm, previously were grown using a safe source material zinc acetate [Zn(ac){sub 2}], at a growth temperature as high as 500 °C. To grow superior TCOs at lower temperatures, we proposed the addition of NH{sub 3} to accelerate the reaction of acetylacetonate compounds. As the result, we could grow gallium-doped ZnO (GZO) TCOs with a resistivity of 2.7 × 10{sup −3} Ω cm and transmittance higher than 90% at 300 °C by using zinc acetylacetonate [Zn(acac){sub 2}] as the Zn source. To grow boron-doped ZnO (BZO) TCOs at a lower growth temperature of 200 °C, we used boron doping along with a toluene solution of diethylzinc (DEZ), that maintained high reactivity without being flammable. These BZO TCOs showed a resistivity of 1.5 × 10{sup −3} Ω cm and transmittance higher than 90%, despite the use of a non-vacuum-based open-air technology. - Highlights: • Introduction of Mist–CVD as a non-vacuum-based, safe, and cost-effective growth technology • Process evolution of the growth technology to lower the growth temperature. • Achievement of low resistive ZnO films at 200oC.

  20. Effect of temperature on the oxidation of soybean biodiesel

    Directory of Open Access Journals (Sweden)

    Pereira, G. G.

    2015-06-01

    Full Text Available This paper proposes to examine the effect of temperature on the oxidation behavior of biodiesel. Soybean biodiesel was oxidized at different temperatures (room temperature, 60, and 110 °C, and the increase in primary and secondary oxidation products was determined based on the peroxide and anisidine values, respectively, during the induction period (IP. The results indicated that the evolution of hydroperoxides followed zero-order reaction kinetics during the IP at all temperatures, and their rate of formation was exponentially affected by temperature. It was also deduced that temperature influenced the ratio between primary and secondary oxidation products formation, which decreased as the temperature increased. Additionally, it was possible to predict the oxidation behavior of the soybean biodiesel at room temperature by an exponential model fitted to the IP values at different temperatures (70, 80, 90, 100, and 110 °C using the Rancimat apparatus.El propósito de este trabajo es evaluar el efecto de la temperatura en el comportamiento oxidativo del biodiesel. Biodiesel derivado de aceite de soja fue oxidado a diferentes temperaturas (temperatura ambiente, 60 y 110 °C y se evaluaron el contenido de compuestos primarios y secundarios de oxidación mediante el índice de peróxidos y de anisidina, respectivamente, a lo largo del periodo de inducción. Los resultados indicaron que el contenido de hidroperóxidos evolucionó siguiendo una cinética de orden cero a lo largo del periodo de inducción a todas las temperaturas y que su velocidad de formación cambió exponencialmente con la temperatura. También se dedujo que la temperatura influyó en la relación entre la formación de los productos de oxidación primarios y secundarios, disminuyendo a medida que aumentaba la temperatura. Además, fue posible predecir el comportamiento oxidativo del biodiesel de soja a temperatura ambiente ajustando a un modelo exponencial los valores de periodo

  1. Aluminide protective coatings on high–temperature creep resistant cast steel

    Directory of Open Access Journals (Sweden)

    J. Kubicki

    2009-10-01

    Full Text Available This paper presents the results of research on aluminide protective coatings manufactured on high–temperature creep resistant cast steel. The main purpose of these coatings is protection against the high temperature corrosion, especially at high carburizing potential atmosphere. Coatings were obtained on cast steel type G–XNiCrSi36–18 with the following methods: pack cementation, paste method, cast method and slurry cementation. The phase composition, thickness and morphology of coatings were determined. Coatings capacity of carbon diffusion inhibition and thermal shocks resistance of coatings were determined with different methods. It was found, that all of the coatings reduce carbon diffusion in different degree and all coatings liable to degradation in consequence cracking and oxidation. Coating life time is mainly dependent on morphology, phase composition and service condition (thermal shocks first of all.

  2. Near Net-Shape Ultra-High Melting Recession-Resistant Rocket Nozzles II: Low Cost Carbon-Carbon Technology for Use in Ultra-High Temperature Oxidative Environments

    National Research Council Canada - National Science Library

    Hoffman, W

    2003-01-01

    .... Two novel approaches to solving these problems are described and these approaches are employed along with a ZrC/W-based nozzle insert to fabricate and test a recession-resistant carbon-carbon rocket...

  3. Effects of prior surface damage on high-temperature oxidation of Fe-, Ni-, and Co-based alloys

    Energy Technology Data Exchange (ETDEWEB)

    Blau, Peter Julian [ORNL; Lowe, Tracie M [ORNL; Pint, Bruce A [ORNL

    2009-01-01

    Multi-component metallic alloys have been developed to withstand high-temperature service in corrosive environments. Some of these applications, like exhaust valve seats in internal combustion engines, must also resist sliding, impact, and abrasion. The conjoint effects of temperature, oxidation, and mechanical contact can result in accelerated wear and the formation of complex surface layers whose properties differ from those of the base metal and the oxide scale that forms in the absence of mechanical contact. The authors have investigated the effects of prior surface damage, produced by scratch tests, on the localized reformation of oxide layers. Three high-performance commercial alloys, based on iron, nickel, and cobalt, were used as model materials. Thermogravimetric analysis (TGA) was used to determine their static oxidation rates at elevated temperature (850o C). A micro-abrasion, ball-cratering technique was used to measure oxide layer thickness and to compare it with TGA results. By using taper-sectioning techniques and energy-dispersive elemental mapping, a comparison was made between oxide compositions grown on non-damaged surfaces and oxides that formed on grooves produced by a diamond stylus. Microindentation and scratch hardness data revealed the effects of high temperature exposure on both the substrate hardness and the nature of oxide scale disruption. There were significant differences in elemental distribution between statically-formed oxides and those that formed on scratched regions

  4. Low temperature solid oxide electrolytes (LT-SOE): A review

    Science.gov (United States)

    Singh, B.; Ghosh, S.; Aich, S.; Roy, B.

    2017-01-01

    Low temperature solid oxide fuel cell (LT-SOFC) can be a source of power for vehicles, online grid, and at the same time reduce system cost, offer high reliability, and fast start-up. A huge amount of research work, as evident from the literature has been conducted for the enhancement of the ionic conductivity of LT electrolytes in the last few years. The basic conduction mechanisms, advantages and disadvantages of different LT oxide ion conducting electrolytes {BIMEVOX systems, bilayer systems including doped cerium oxide/stabilised bismuth oxide and YSZ/DCO}, mixed ion conducting electrolytes {doped cerium oxides/alkali metal carbonate composites}, and proton conducting electrolytes {doped and undoped BaCeO3, BaZrO3, etc.} are discussed here based on the recent research articles. Effect of various material aspects (composition, doping, layer thickness, etc.), fabrication methods (to achieve different microstructures and particle size), design related strategies (interlayer, sintering aid etc.), characterization temperature & environment on the conductivity of the electrolytes and performance of the fuel cells made from these electrolytes are shown in tabular form and discussed. The conductivity of the electrolytes and performance of the corresponding fuel cells are compared. Other applications of the electrolytes are mentioned. A few considerations regarding the future prospects are pointed.

  5. Study of the high-temperature corrosion of heat-resisting alloys

    Energy Technology Data Exchange (ETDEWEB)

    Wada, K.

    1986-01-01

    An experimental study is reported of the corrosion resistance of the heat-resistant materials which play such an important role in the development of high-efficiency coal gasification combined-cycle power generation. Specifically, a study was made of the high-temperature and molten salt corrosion of nickel base alloys in coal combustion gas environments. The authors outline various types of high-temperature corrosion which occur: oxidation, sulfidation, decarburization and carburizing, nitridation, hot corrosion and halogenation. The mechanisms involved in molten salt corrosion are explained with reference to various models and currently available data. Finally, a study of electro-chemical measuring methods is reported. The authors conclude that future work on corrosion in coal gasification combined cycle power generation systems should concentrate on the following items: 1) elucidating the conditions under which molten salts form; 2) developing methods for predicting the quantity of molten salts which will form, and for assessing their contribution to corrosion; 3) evaluating the corrosion resistance of specific alloys to molten salts of given composition; 4) clarifying the effect of alloy surface temperature on corrosion resistance and local corrosion; and 5) developing techniques for predicting the amount of corrosion. 24 references, 28 figures, 7 tables.

  6. Shape-Dependent Activity of Ceria for Hydrogen Electro-Oxidation in Reduced-Temperature Solid Oxide Fuel Cells.

    Science.gov (United States)

    Tong, Xiaofeng; Luo, Ting; Meng, Xie; Wu, Hao; Li, Junliang; Liu, Xuejiao; Ji, Xiaona; Wang, Jianqiang; Chen, Chusheng; Zhan, Zhongliang

    2015-11-04

    Single crystalline ceria nanooctahedra, nanocubes, and nanorods are hydrothermally synthesized, colloidally impregnated into the porous La0.9Sr0.1Ga0.8Mg0.2O3-δ (LSGM) scaffolds, and electrochemically evaluated as the anode catalysts for reduced temperature solid oxide fuel cells (SOFCs). Well-defined surface terminations are confirmed by the high-resolution transmission electron microscopy--(111) for nanooctahedra, (100) for nanocubes, and both (110) and (100) for nanorods. Temperature-programmed reduction in H2 shows the highest reducibility for nanorods, followed sequentially by nanocubes and nanooctahedra. Measurements of the anode polarization resistances and the fuel cell power densities reveal different orders of activity of ceria nanocrystals at high and low temperatures for hydrogen electro-oxidation, i.e., nanorods > nanocubes > nanooctahedra at T ≤ 450 °C and nanooctahedra > nanorods > nanocubes at T ≥ 500 °C. Such shape-dependent activities of these ceria nanocrystals have been correlated to their difference in the local structure distortions and thus in the reducibility. These findings will open up a new strategy for design of advanced catalysts for reduced-temperature SOFCs by elaborately engineering the shape of nanocrystals and thus selectively exposing the crystal facets. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Tunable room-temperature ferromagnet using an iron-oxide and graphene oxide nanocomposite

    KAUST Repository

    Lin, Aigu L.

    2015-06-23

    Magnetic materials have found wide application ranging from electronics and memories to medicine. Essential to these advances is the control of the magnetic order. To date, most room-temperature applications have a fixed magnetic moment whose orientation is manipulated for functionality. Here we demonstrate an iron-oxide and graphene oxide nanocomposite based device that acts as a tunable ferromagnet at room temperature. Not only can we tune its transition temperature in a wide range of temperatures around room temperature, but the magnetization can also be tuned from zero to 0.011 A m2/kg through an initialization process with two readily accessible knobs (magnetic field and electric current), after which the system retains its magnetic properties semi-permanently until the next initialization process. We construct a theoretical model to illustrate that this tunability originates from an indirect exchange interaction mediated by spin-imbalanced electrons inside the nanocomposite. © 2015 Scientific Reports.

  8. Defective iron-oxide nanoparticles synthesised by high temperature plasma processing: a magnetic characterisation versus temperature.

    Science.gov (United States)

    Balasubramanian, C; Joseph, B; Orpe, P B; Saini, N L; Mukherjee, S; Dziedzic-Kocurek, K; Stanek, J; Di Gioacchino, D; Marcelli, A

    2016-11-04

    Magnetic properties and phase compositions of iron-oxide nanoparticles synthesised by a high temperature arc plasma route have been investigated by Mössbauer spectroscopy and high harmonic magnetic AC susceptibility measurements, and correlated with morphological and structural properties for different synthesis conditions. The Mössbauer spectra precisely determined the presence of different iron-oxide fractions in the investigated nanoparticles, while the high harmonic magnetic susceptibility measurements revealed the occurrence of metastable magnetic phases evolving in temperature and time. This study illustrates magnetic properties and dynamics of the magnetic configurations of iron-oxide nanoparticles grown by high temperature plasma, a process less explored so far but extremely useful for synthesising large numbers of nanoparticles for industrial applications.

  9. Corrosion resistant coatings suitable for elevated temperature application

    Science.gov (United States)

    Chan, Kwai S [San Antonio, TX; Cheruvu, Narayana Sastry [San Antonio, TX; Liang, Wuwei [Austin, TX

    2012-07-31

    The present invention relates to corrosion resistance coatings suitable for elevated temperature applications, which employ compositions of iron (Fe), chromium (Cr), nickel (Ni) and/or aluminum (Al). The compositions may be configured to regulate the diffusion of metals between a coating and a substrate, which may then influence coating performance, via the formation of an inter-diffusion barrier layer. The inter-diffusion barrier layer may comprise a face-centered cubic phase.

  10. Thin Film Materials and Devices for Resistive Temperature Sensing Applications

    Science.gov (United States)

    2015-05-21

    is based on the phenomenon known as the Seebeck effect . Named after the T. Seebeck who first observed this effect , he noted that there is a current...this effect is known as the thermal electromotive force. A device which uses the Seebeck effect for the measurement of temperature is known as a...21 Figure 2-7. Graph showing the effect of total deposition pressure on TCR and resistivity of deposited pm-Ge:H thin films

  11. Random telegraph noise and resistance switching analysis of oxide based resistive memory.

    Science.gov (United States)

    Choi, Shinhyun; Yang, Yuchao; Lu, Wei

    2014-01-07

    Resistive random access memory (RRAM) devices (e.g."memristors") are widely believed to be a promising candidate for future memory and logic applications. Although excellent performance has been reported, the nature of resistance switching is still under extensive debate. In this study, we perform systematic investigation of the resistance switching mechanism in a TaOx based RRAM through detailed noise analysis, and show that the resistance switching from high-resistance to low-resistance is accompanied by a semiconductor-to-metal transition mediated by the accumulation of oxygen-vacancies in the conduction path. Specifically, pronounced random-telegraph noise (RTN) with values up to 25% was observed in the device high-resistance state (HRS) but not in the low-resistance state (LRS). Through time-domain and temperature dependent analysis, we show that the RTN effect shares the same origin as the resistive switching effects, and both can be traced to the (re)distribution of oxygen vacancies (VOs). From noise and transport analysis we further obtained the density of states and average distance of the VOs at different resistance states, and developed a unified model to explain the conduction in both the HRS and the LRS and account for the resistance switching effects in these devices. Significantly, it was found that even though the conduction channel area is larger in the HRS, during resistive switching a localized region gains significantly higher VO and dominates the conduction process. These findings reveal the complex dynamics involved during resistive switching and will help guide continued optimization in the design and operation of this important emerging device class.

  12. High temperature oxidation of iron-chromium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Mikkelsen, Lars

    2003-06-15

    The high temperature oxidation of the ferritic alloy Fe78Cr22 has been investigated in the present work. The effect of small alloying additions of cerium and/or silicon was also investigated. The alloys were oxidized at 973, 1173 and 1373 K in either air or a hydrogen/argon mixture. The various reaction atmospheres contained between 0.02 and 50% water vapour. The oxide scales formed on the various alloys at 973 K consisted of thin chromia layers. The oxide scales grown on the alloys at 1173 K also consisted of a chromia layer. The microstructure of the chromia scales was found to depend on the reaction atmosphere. The chromia scales grown in hydrogen/argon atmospheres formed oxide whiskers and oxide ridges at the surface of the scales, while the chromia scales grown in air formed larger oxide grains near the surface. This difference in oxide microstructure was due to the vaporization of chromium species from the chromia scales grown in air. Two different growth mechanisms are proposed for the growth of oxide whiskers. The growth rate of the chromia scales was independent of the oxygen activity. This is explained by a growth mechanism of the chromia scales, where the growth is governed by the diffusion of interstitial chromium. The addition of silicon to the iron-chromium alloy resulted in the formation of silica particles beneath the chromia scale. The presence of silicon in the alloy was found to decrease the growth rate of the chromia scale. This is explained by a blocking mechanism, where the silica particles beneath the chromia scale partly block the outwards diffusion of chromium from the alloy to the chromia scale. The addition of cerium to the iron-chromium alloy improved the adhesion of the chromia scale to the alloy and decreased the growth rate of chromia. It was observed that the minimum concentration of cerium in the alloy should be 0.3 at.% in order to observe an effect of the cerium addition. The effect of cerium is explained by the &apos

  13. Programming of Cell Resistance to Genotoxic and Oxidative Stress.

    Science.gov (United States)

    Velegzhaninov, Ilya O; Ievlev, Vitaly A; Pylina, Yana I; Shadrin, Dmitry M; Vakhrusheva, Olesya M

    2018-01-02

    Different organisms, cell types, and even similar cell lines can dramatically differ in resistance to genotoxic stress. This testifies to the wide opportunities for genetic and epigenetic regulation of stress resistance. These opportunities could be used to increase the effectiveness of cancer therapy, develop new varieties of plants and animals, and search for new pharmacological targets to enhance human radioresistance, which can be used for manned deep space expeditions. Based on the comparison of transcriptomic studies in cancer cells, in this review, we propose that there is a high diversity of genetic mechanisms of development of genotoxic stress resistance. This review focused on possibilities and limitations of the regulation of the resistance of normal cells and whole organisms to genotoxic and oxidative stress by the overexpressing of stress-response genes. Moreover, the existing experimental data on the effect of such overexpression on the resistance of cells and organisms to various genotoxic agents has been analyzed and systematized. We suggest that the recent advances in the development of multiplex and highly customizable gene overexpression technology that utilizes the mutant Cas9 protein and the abundance of available data on gene functions and their signal networks open new opportunities for research in this field.

  14. Structure of liquid oxides at very high temperatures

    CERN Document Server

    Landron, C; Thiaudiere, D; Price, D L; Greaves, G N

    2003-01-01

    The structural characterization of condensed matter by synchrotron radiation combined with neutron data constitutes a powerful structural tool in material science. In order to investigate refractory liquids at very high temperatures, we have developed a new analysis chamber for performing combined X-ray absorption and diffraction measurements by using laser heating and aerodynamic levitation. A similar system has been designed for neutron experiments. This high temperature equipment presents several advantages: the container does not physically or chemically perturb the sample, heterogeneous nucleation during cooling is suppressed and pollution by the container is removed. This cell can operate under various gas conditions from room temperature up to 3000 deg. C obtained by means of a sealed 125 W CO sub 2 laser. Experiments have been performed at LURE, ESRF and at ISIS. We have studied the local structure around the cations in several liquid and solid oxides. We have shown that high temperature synchrotron d...

  15. Melting temperature of uranium - plutonium mixed oxide fuel

    Energy Technology Data Exchange (ETDEWEB)

    Ishii, Tetsuya; Hirosawa, Takashi [Power Reactor and Nuclear Fuel Development Corp., Oarai, Ibaraki (Japan). Oarai Engineering Center

    1997-08-01

    Fuel melting temperature is one of the major thermodynamical properties that is used for determining the design criteria on fuel temperature during irradiation in FBR. In general, it is necessary to evaluate the correlation of fuel melting temperature to confirm that the fuel temperature must be kept below the fuel melting temperature during irradiation at any conditions. The correlations of the melting temperature of uranium-plutonium mixed oxide (MOX) fuel, typical FBR fuel, used to be estimated and formulized based on the measured values reported in 1960`s and has been applied to the design. At present, some experiments have been accumulated with improved experimental techniques. And it reveals that the recent measured melting temperatures does not agree well to the data reported in 1960`s and that some of the 1960`s data should be modified by taking into account of the recent measurements. In this study, the experience of melting temperature up to now are summarized and evaluated in order to make the fuel pin design more reliable. The effect of plutonium content, oxygen to metal ratio and burnup on MOX fuel melting was examined based on the recent data under the UO{sub 2} - PuO{sub 2} - PuO{sub 1.61} ideal solution model, and then formulized. (J.P.N.)

  16. Resistance of oxidative stress in biofilm and planktonic cells

    Directory of Open Access Journals (Sweden)

    Witold Jakubowski

    2015-04-01

    Full Text Available This work studied the susceptibility of biofilm produced by E. coli to oxidative stress, and compared the components of free radicals defences: level of glutathione, catalase and dismutase activities in planktonic and biofilm located cells. Results showed the diversity of responses to oxidative stress in bacterial cells in log or stationary phases in both planktonic and biofilm forms. The bacteria were exposed to free-radical donors (H2O2, tBOOH, menadione, SIN-1 or peroxynitrite in a wide range of final concentrations, from 0.5 to 10mM. Different level of toxicity of individual donors, independence of cell type (planktonic forms or biofilm and phases of growth were observed. The highest oxidative stress resistance was observed for the cells in logarithmic phase of growth treated with H2O2, both in planktonic and biofilm forms, whereas for the cells in stationary phase, the highest resistance was observed for menadione. These results showed higher efficiency of agents based on superoxide anion donors in combating bacteria colonizing abiotic surfaces stainless steel (AISI 316L.

  17. Electrical Characterization of Temperature Dependent Resistive Switching in Pr0.7C0.3MnO3

    Science.gov (United States)

    Lopez, Melinda; Salvo, Christopher; Tsui, Stephen

    2012-02-01

    Resistive switching offers a non-volatile and reversible means to possibly create a more physically compact yet larger access capacity in memory technology. While there has been a great deal of research conducted on this electrical property in oxide materials, there is still more to be learned about this at both high voltage pulsing and cryogenic temperatures. In this work, the electrical properties of a PCMO-metal interface switch were examined after application of voltage pulsing varying from 100 V to 1000 V and at temperatures starting at 293 K and lowered to 80 K. What was discovered was that below temperatures of 150 K, the resistive switching began to decrease across all voltage pulsing and that at all temperatures before this cessation, the change in resistive switching increased with higher voltage pulsing. We suggest that a variable density of charge traps at the interface is a likely mechanism, and work continues to extract more details.

  18. Kinetic features of the low-temperature oxidation of propane

    Science.gov (United States)

    Sargsyan, G. N.

    2012-11-01

    The results from recording the chemiluminescence in the infrared part of the spectrum that emerges during the oxidation of propane in air under the effect of monotonically increasing pressure within the range 2666 Pa ≤ P ≤ 16000 Pa, both under isothermal conditions and in the 593-600 K temperature range, are presented. It is established that no pulsed chemiluminescence is observed at constant values of pressure within the range 2666 Pa ≤ P ≤ 16000 Pa and temperature within the range of 593-600 K in the reaction mixture.

  19. Cast iron zinc galvanizing improved by high temperature oxidation process

    OpenAIRE

    D. Jędrzejczyk; M. Hajduga

    2010-01-01

    Purpose: To evaluate influence of the high-temperature oxidation, as the preliminary stage previous to coating with zinc on the change of surface layer structure as well as subsurface layer of cast iron with flake, vermicular and nodular graphite.Design/methodology/approach: The experiment was led in the temperature range: 850-1050ºC in ambient air. Samples have been taken out from the furnace separately after: 2-12 hours. After scale layer removal the hot dip zinc coating in industrial condi...

  20. Gas detection using low-temperature reduced graphene oxide sheets

    Science.gov (United States)

    Lu, Ganhua; Ocola, Leonidas E.; Chen, Junhong

    2009-02-01

    We demonstrate a high-performance gas sensor using partially reduced graphene oxide (GO) sheets obtained through low-temperature step annealing (300 °C at maximum) in argon flow at atmospheric pressure. The electrical conductance of GO was measured after each heating cycle to interpret the level of reduction. The thermally reduced GO showed p-type semiconducting behavior in ambient conditions and were responsive to low-concentration NO2 diluted in air at room temperature. The sensitivity is attributed to the electron transfer from the reduced GO to adsorbed NO2, which leads to enriched hole concentration and enhanced electrical conduction in the reduced GO sheet.

  1. Multiferroic iron oxide thin films at room temperature.

    Science.gov (United States)

    Gich, Martí; Fina, Ignasi; Morelli, Alessio; Sánchez, Florencio; Alexe, Marin; Gàzquez, Jaume; Fontcuberta, Josep; Roig, Anna

    2014-07-16

    Multiferroic behaviour at room temperature is demonstrated in ε-Fe2 O3 . The simple composition of this new ferromagnetic ferroelectric oxide and the discovery of a robust path for its thin film growth by using suitable seed layers may boost the exploitation of ε-Fe2 O3 in novel devices. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Thermal deoxygenation of graphite oxide at low temperature

    Science.gov (United States)

    Kampars, V.; Legzdina, M.

    2015-03-01

    Synthesis of graphene via the deoxygenation of the graphite oxide (GO) is a method for the large-scale production of this nanomaterial possessing exceptional mechanical, electrical and translucent properties. Graphite oxide sheet contains at least four different oxygen atoms connected to the Csp3 and Csp2 atoms of the sheet in the form of hydroxyl, epoxy, carboxyl or carbonyl groups. Some of these functional groups are located at the surface but others situated at the edges of the platelets. To obtain the graphene nanoplatelets or the few-layer graphene the oxygen functionalities must be removed. Exfoliation and deoxygenation can be accomplished by the use of chemical reductants or heat. Thermal deoxygenation as greener and simpler approach is more preferable over chemical reduction approach. Usually a considerable mass loss of GO observed upon heating at temperatures starting at 200 °C and is attributed to the deoxygenation process. In order to avoid the defects of the obtained graphene sheets it is very important to find the methods for lowering the deoxygenation temperature of GO. Herein, we have investigated the way treatment of the Hummer's synthesis product with acetone and methyl tert-butyl ether under ultrasonication in order to lower the thermal stability of the graphite oxide and its deoxygenation temperature. The obtained results indicate that treatment of the graphite oxide with solvents mentioned above substantially reduces the reduction and exfoliation temperature (130 °C) under ambient atmosphere. The investigation of the composition of evolved gases by hyphenated Pyr/GC/MS method at different experimental conditions under helium atmosphere shows that without the expected H2O, CO and CO2 also sulphur dioxide and acetone has been released.

  3. Low-Temperature Oxidation of CO in Smoke: A Review

    Directory of Open Access Journals (Sweden)

    Dyakonov AJ

    2014-12-01

    Full Text Available The low-temperature catalytic oxidation of CO has been reviewed, targeting its possible application to cigarette smoke. The treatment of CO in smoke by using a filter-packed catalyst is extremely complicated by the presence of a variety of chemically active gaseous compounds, a particulate phase, the high velocity of pulsing smoke flow, and ambient temperature. The relevant mechanisms of catalysis and the catalyst preparation variables that could help to overcome these problems are considered. Possible contributors to the overall kinetics that must include variety of diffusion processes were briefly discussed. The chemisorption of O2, CO and CO2 on Pd, Pt and Au and on partially reducible supports, surface reactions and oscillations of the CO oxidation rate were analyzed. The effects of the surface structure and electronic properties of the catalyst support, preparation conditions and presence of a second transition metal on the projected CO oxidation activity of the catalysts in smoke are also discussed. The reviewed catalyst preparation approaches can solve the low-temperature catalyst activity problem. However, more work is required to stabilize this activity of an air-exposed catalyst to provide a necessary shelf life for a cigarette. The greatest challenge seems to be a particular phase - exclusive selectivity that would not contradict with the necessary fast diffusion of gases through the catalyst pores.

  4. Structural stability and oxidation resistance of amorphous Zr-Al alloys

    Energy Technology Data Exchange (ETDEWEB)

    Soroka, I.L., E-mail: Inna.Soroka66@gmail.co [Department of Materials Chemistry, Uppsala University, Box 538, SE-751 21 Uppsala (Sweden); Vegelius, J.; Korelis, P.T. [Department of Physics and Materials Science, Uppsala University, Box 530, SE-751 21 Uppsala (Sweden); Fallberg, A. [Department of Materials Chemistry, Uppsala University, Box 538, SE-751 21 Uppsala (Sweden); Butorin, S.M.; Hjoervarsson, B. [Department of Physics and Materials Science, Uppsala University, Box 530, SE-751 21 Uppsala (Sweden)

    2010-06-15

    We investigated the structural stability and oxidation resistance of Zr-Al films upon annealing in air. The concentration of Zr was varied from 0 to 100 at.%, with a step of 10 at.%. The films were fabricated using ultra-high vacuum based magnetron sputtering. The as-deposited films with Zr content from 17.3 at.% to 70.7 at.% were found to be X-ray amorphous at room temperature. When exposed to air a thin oxide layer, typically less than 6 nm, is formed. The thickness of the oxide layers increases when the samples are annealed in air and most of these are found to be fully oxidized at 700 {sup o}C with the formation of crystalline and amorphous oxides on the top of crystalline and amorphous metal films, respectively. The amorphous oxide layers are found to be dense, with well defined thicknesses. An experimental non-equilibrium phase diagram is provided, covering the whole concentration range of the Zr-Al system.

  5. Temperature Dependence of the Seebeck Coefficient in Zinc Oxide Thin Films

    Science.gov (United States)

    Noori, Amirreza; Masoumi, Saeed; Hashemi, Najmeh

    2017-12-01

    Thermoelectric devices are reliable tools for converting waste heat into electricity as they last long, produce no noise or vibration, have no moving elements, and their light weight makes them suitable for the outer space usage. Materials with high thermoelectric figure of merit (zT) have the most important role in the fabrication of efficient thermoelectric devices. Metal oxide semiconductors, specially zinc oxide has recently received attention as a material suitable for sensor, optoelectronic and thermoelectric device applications because of their wide direct bandgap, chemical stability, high-energy radiation endurance, transparency and acceptable zT. Understanding the thermoelectric properties of the undoped ZnO thin films can help design better ZnO-based devices. Here, we report the results of our experimental work on the thermoelectric properties of the undoped polycrystalline ZnO thin films. These films are deposited on alumina substrates by thermal evaporation of zinc in vacuum followed by a controlled oxidation process in air carried out at the 350-500 °C temperature range. The experimental setup including gradient heaters, thermometry system and Seebeck voltage measurement equipment for high resistance samples is described. Seebeck voltage and electrical resistivity of the samples are measured at different conditions. The observed temperature dependence of the Seebeck coefficient is discussed.

  6. The High-Temperature Wear and Oxidation Behavior of CrC-Based HVOF Coatings

    Science.gov (United States)

    Houdková, Šárka; Česánek, Zdeněk; Smazalová, Eva; Lukáč, František

    2018-01-01

    Three commercially available chromium carbide-based powders with different kinds of matrix (Cr3C2-25%NiCr; Cr3C2-25%CoNiCrAlY and Cr3C2-50%NiCrMoNb) were deposited by an HVOF JP-5000 spraying gun, evaluated and compared. The influence of heat treatment on the microstructure and properties, as well as the oxidation resistance in a hot steam environment ( p = 24 MPa; T = 609 °C), was evaluated by SEM and XRD with respect to their potential application in the steam power industry. The sliding wear resistance measured at room and elevated ( T = 600 °C) temperatures according to ASTM G-133. For all three kinds of chromium carbide-based coatings, the precipitation of secondary carbides from the supersaturated matrix was observed during the heat treatment. For Cr3C2-25%NiCr coating annealed in hot steam environment as well as for Cr3C2-25%CoNiCrAlY coating in both environments, the inner carbide oxidation was recorded. The sliding wear resistance was found equal at room temperature, regardless of the matrix composition and content, while at elevated temperatures, the higher wear was measured, varying in dependence on the matrix composition and content. The chromium carbide-based coating with modified matrix composition Cr3C2-50%NiCrMoNb is suitable to replace the Cr3C2-25%NiCr coating in a hot steam environment to eliminate the risk of failure caused by inner carbide oxidation.

  7. Modeling of High Temperature Oxidation Behavior of FeCrAl Alloy by using Artificial Neural Network

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Joon; Ryu, Ho Jin [KAIST, Daejeon (Korea, Republic of)

    2016-10-15

    Refractory alloys are candidate materials for replacing current zirconium-base cladding of light water reactors and they retain significant creep resistance and mechanical strength at high temperatures up to 1500 ℃ due to their high melting temperature. Thermal neutron cross sections of refractory metals are higher than that of zirconium, however the loss of neutron can be overcome by reducing cladding thickness which can be facilitated with enhanced mechanical properties. However, most refractory metals show the poor oxidation resistance at a high temperature. Oxidation behaviors of the various compositions of FeCrAl alloys in high temperature conditions were modeled by using Bayesian neural network. The automatic relevance determination (ARD) technique represented the influence of the composition of alloying elements on the oxidation resistance of FeCrAl alloys. This model can be utilized to understand the tendency of oxidation behavior along the composition of each element and prove the applicability of neural network modeling for the development of new cladding material of light water reactors.

  8. Nanofiber-based composite cathodes for intermediate temperature solid oxide fuel cells

    Science.gov (United States)

    Ahn, Minwoo; Lee, Jongseo; Lee, Wonyoung

    2017-06-01

    We demonstrate the Sm0.5Sr0.5CoO3-δ (SSC) nanofiber-based composite cathodes for intermediate temperature solid oxide fuel cells (IT-SOFCs), showing a cathode area-specific resistance (ASR) value of 0.024 Ωcm2 at 650 °C. The hollow and porous SSC nanofiber layer, fabricated by electrospinning, is sintered at low temperatures to preserve the high specific surface area for facile oxygen surface exchange reactions. The low sintering temperature is enabled by additional SSC powder layer, providing sufficient adhesion between the electrolyte and the nanofiber layer. Our results can provide a design guideline to fully utilize the nanostructured electrodes by engineering the structural properties of the surface and the interface, and hence high-performance IT-SOFCs can be achieved by structural modification with conventional materials.

  9. Catalytic combustion over high temperature stable metal oxides

    Energy Technology Data Exchange (ETDEWEB)

    Berg, M. [TPS Termiska Processer AB, Nykoeping (Sweden)

    1996-12-31

    This thesis presents a study of the catalytic effects of two interesting high temperature stable metal oxides - magnesium oxide and manganese substituted barium hexa-aluminate (BMA) - both of which can be used in the development of new monolithic catalysts for such applications. In the first part of the thesis, the development of catalytic combustion for gas turbine applications is reviewed, with special attention to alternative fuels such as low-BTU gas, e.g. produced in an air blown gasifier. When catalytic combustion is applied for such a fuel, the primary advantage is the possibility of decreasing the conversion of fuel nitrogen to NO{sub x}, and achieving flame stability. In the experimental work, MgO was shown to have a significant activity for the catalytic combustion of methane, lowering the temperature needed to achieve 10 percent conversion by 270 deg C compared with homogeneous combustion.The reaction kinetics for methane combustion over MgO was also studied. It was shown that the heterogeneous catalytic reactions were dominant but that the catalytically initiated homogeneous gas phase reactions were also important, specially at high temperatures. MgO and BMA were compared. The latter showed a higher catalytic activity, even when the differences in activity decreased with increasing calcination temperature. For BMA, CO{sub 2} was the only product detected, but for MgO significant amounts of CO and C{sub 2}-hydrocarbons were formed. BMA needed a much lower temperature to achieve total conversion of other fuels, e.g. CO and hydrogen, compared to the temperature for total conversion of methane. This shows that BMA-like catalysts are interesting for combustion of fuel mixtures with high CO and H{sub 2} content, e.g. gas produced from gasification of biomass. 74 refs

  10. Lowering the temperature of solid oxide fuel cells.

    Science.gov (United States)

    Wachsman, Eric D; Lee, Kang Taek

    2011-11-18

    Fuel cells are uniquely capable of overcoming combustion efficiency limitations (e.g., the Carnot cycle). However, the linking of fuel cells (an energy conversion device) and hydrogen (an energy carrier) has emphasized investment in proton-exchange membrane fuel cells as part of a larger hydrogen economy and thus relegated fuel cells to a future technology. In contrast, solid oxide fuel cells are capable of operating on conventional fuels (as well as hydrogen) today. The main issue for solid oxide fuel cells is high operating temperature (about 800°C) and the resulting materials and cost limitations and operating complexities (e.g., thermal cycling). Recent solid oxide fuel cells results have demonstrated extremely high power densities of about 2 watts per square centimeter at 650°C along with flexible fueling, thus enabling higher efficiency within the current fuel infrastructure. Newly developed, high-conductivity electrolytes and nanostructured electrode designs provide a path for further performance improvement at much lower temperatures, down to ~350°C, thus providing opportunity to transform the way we convert and store energy.

  11. Improving the oxidation resistance and stability of Ag nanoparticles by coating with multilayered reduced graphene oxide

    Science.gov (United States)

    Li, Yahui; Zhang, Huayu; Wu, Bowen; Guo, Zhuo

    2017-12-01

    A kind of coating nanostructure, Ag nanoparticles coated with multilayered reduced graphene oxide (RGO), is fabricated by employing a three-step reduction method in an orderly manner, which is significantly different from the conventional structures that are simply depositing or doping with Ag nanoparticles on RGO via chemical reduction. The as-prepared nanostructure is investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected-area electronic diffraction (SEAD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). The results show that the obtained Ag/RGO nanostructure is observed to be a perfect coating structure with well dispersed Ag particles, which is responsible for the remarkable oxidation resistance. The results of XPS spectra indicate the content of metallic Ag is far greater than that of Ag oxides despite of prolonged exposure to the air, which fully demonstrate the excellent stability of thus coating nanostructure.

  12. Retention failure analysis of metal-oxide based resistive memory

    Science.gov (United States)

    Choi, Shinhyun; Lee, Jihang; Kim, Sungho; Lu, Wei D.

    2014-09-01

    Resistive switching devices (RRAMs) have been proposed a promising candidate for future memory and neuromorphic applications. Central to the successful application of these emerging devices is the understanding of the resistance switching and failure mechanism, and identification of key physical parameters that will enable continued device optimization. In this study, we report detailed retention analysis of a TaOx based RRAM at high temperatures and the development of a microscopic oxygen diffusion model that fully explains the experimental results and can be used to guide future device developments. The device conductance in low resistance state (LRS) was constantly monitored at several elevated temperatures (above 300 °C), and an initial gradual conductivity drift followed by a sudden conductance drop were observed during retention failure. These observations were explained by a microscopic model based on oxygen vacancy diffusion, which quantitatively explains both the initial gradual conductance drift and the sudden conductance drop. Additionally, a non-monotonic conductance change, with an initial conductance increase followed by the gradual conductance decay over time, was observed experimentally and explained within the same model framework. Specifically, our analysis shows that important microscopic physical parameters such as the activation energy for oxygen vacancy migration can be directly calculated from the failure time versus temperature relationship. Results from the analytical model were further supported by detailed numerical multi-physics simulation, which confirms the filamentary nature of the conduction path in LRS and the importance of oxygen vacancy diffusion in device reliability. Finally, these high-temperature stability measurements also reveal the existence of multiple filaments in the same device.

  13. Behavior of an improved Zr fuel cladding with oxidation resistant coating under loss-of-coolant accident conditions

    Energy Technology Data Exchange (ETDEWEB)

    Park, Dong Jun, E-mail: pdj@kaeri.re.kr; Kim, Hyun Gil; Jung, Yang Il; Park, Jung Hwan; Yang, Jae Ho; Koo, Yang Hyun

    2016-12-15

    This study investigates protective coatings for improving the high temperature oxidation resistance of Zr fuel claddings for light water nuclear reactors. FeCrAl alloy and Cr layers were deposited onto Zr plates and tubes using cold spraying. For the FeCrAl/Zr system, a Mo layer was introduced between the FeCrAl coating and the Zr matrix to prevent inter-diffusion at high temperatures. Both the FeCrAl and Cr coatings improved the oxidation resistance compared to that of the uncoated Zr alloy when exposed to a steam environment at 1200 °C. The ballooning behavior and mechanical properties of the coated cladding samples were studied under simulated loss-of-coolant accident conditions. The coated samples showed higher burst temperatures, lower circumferential strain, and smaller rupture openings compared to the uncoated Zr. Although 4-point bend tests of the coated samples showed a small increase in the maximum load, ring compression tests of a sectioned sample showed increased ductility. - Highlights: • Cr and FeCrAl were coated onto Zr fuel cladding for light water nuclear reactors. • Mo layer between FeCrAl and Zr prevented inter-diffusion at high temperatures. • Coated claddings were tested under loss-of-cooling accident conditions. • Coating improved high-temperature oxidation resistance and mechanical properties.

  14. High-temperature oxidation and ignition of metals

    Science.gov (United States)

    Hill, Paul R; Adamson, David; Foland, Douglas H; Bressette, Walter E

    1956-01-01

    A study of the high-temperature oxidation of several aircraft construction materials was undertaken to assess the possibility of ignition under high-temperature flight conditions.Tests have been made both in open and closed jets, and, in addition, the burning of metals has been observed under static conditions in a pressurized vessel containing either air, oxygen, or nitrogen. When heated in an atmosphere of oxygen or when heated and plunged into a supersonic airstream, titanium, iron, carbon steel, and common alloys such as 4130 were found to have spontaneous-ignition temperatures in the solid phase (below melting) and they melted rapidly while burning. Inconel, copper, 18-8 stainless steel, Monel, and aluminum could not be made to ignite spontaneously at temperatures up to melting with the equipment available. Magnesium ignited spontaneously in either type of test at temperatures just above the melting temperature.A theory for the spontaneous ignition of metals, based on the first law of thermodynamics, is presented. Good correlation was obtained between calculated spontaneous-ignition temperatures and values measured in supersonic jet tests. There appears at the present time to be no need for concern regarding the spontaneous ignition of Inconel, the stainless steels, copper, aluminum, or magnesium for ordinary supersonic airplane or missile applications where the material temperature is kept within ordinary structural limits or at least below melting. For hypersonic applications where the material is to be melted away to absorb the heat of convection, the results of the present tests do not apply sufficiently to allow a conclusion.

  15. Reduced graphene oxide for room-temperature gas sensors

    Energy Technology Data Exchange (ETDEWEB)

    Lu Ganhua; Chen Junhong [Department of Mechanical Engineering, University of Wisconsin-Milwaukee, Milwaukee, WI 53211 (United States); Ocola, Leonidas E, E-mail: jhchen@uwm.ed [Center for Nanoscale Materials, Argonne National Laboratory, Argonne, IL 60439 (United States)

    2009-11-04

    We demonstrated high-performance gas sensors based on graphene oxide (GO) sheets partially reduced via low-temperature thermal treatments. Hydrophilic graphene oxide sheets uniformly suspended in water were first dispersed onto gold interdigitated electrodes. The partial reduction of the GO sheets was then achieved through low-temperature, multi-step annealing (100, 200, and 300 {sup 0}C) or one-step heating (200 {sup 0}C) of the device in argon flow at atmospheric pressure. The electrical conductance of GO was measured after each heating cycle to interpret the level of reduction. The thermally-reduced GO showed p-type semiconducting behavior in ambient conditions and was responsive to low-concentration NO{sub 2} and NH{sub 3} gases diluted in air at room temperature. The sensitivity can be attributed mainly to the electron transfer between the reduced GO and adsorbed gaseous molecules (NO{sub 2}/NH{sub 3}). Additionally, the contact between GO and the Au electrode is likely to contribute to the overall sensing response because of the adsorbates-induced Schottky barrier variation. A simplified model is used to explain the experimental observations.

  16. Reduced graphene oxide for room-temperature gas sensors.

    Science.gov (United States)

    Lu, Ganhua; Ocola, Leonidas E; Chen, Junhong

    2009-11-04

    We demonstrated high-performance gas sensors based on graphene oxide (GO) sheets partially reduced via low-temperature thermal treatments. Hydrophilic graphene oxide sheets uniformly suspended in water were first dispersed onto gold interdigitated electrodes. The partial reduction of the GO sheets was then achieved through low-temperature, multi-step annealing (100, 200, and 300 degrees C) or one-step heating (200 degrees C) of the device in argon flow at atmospheric pressure. The electrical conductance of GO was measured after each heating cycle to interpret the level of reduction. The thermally-reduced GO showed p-type semiconducting behavior in ambient conditions and was responsive to low-concentration NO2 and NH3 gases diluted in air at room temperature. The sensitivity can be attributed mainly to the electron transfer between the reduced GO and adsorbed gaseous molecules (NO2/NH3). Additionally, the contact between GO and the Au electrode is likely to contribute to the overall sensing response because of the adsorbates-induced Schottky barrier variation. A simplified model is used to explain the experimental observations.

  17. Reduced graphene oxide for room-temperature gas sensors

    Science.gov (United States)

    Lu, Ganhua; Ocola, Leonidas E.; Chen, Junhong

    2009-11-01

    We demonstrated high-performance gas sensors based on graphene oxide (GO) sheets partially reduced via low-temperature thermal treatments. Hydrophilic graphene oxide sheets uniformly suspended in water were first dispersed onto gold interdigitated electrodes. The partial reduction of the GO sheets was then achieved through low-temperature, multi-step annealing (100, 200, and 300 °C) or one-step heating (200 °C) of the device in argon flow at atmospheric pressure. The electrical conductance of GO was measured after each heating cycle to interpret the level of reduction. The thermally-reduced GO showed p-type semiconducting behavior in ambient conditions and was responsive to low-concentration NO2 and NH3 gases diluted in air at room temperature. The sensitivity can be attributed mainly to the electron transfer between the reduced GO and adsorbed gaseous molecules (NO2/NH3). Additionally, the contact between GO and the Au electrode is likely to contribute to the overall sensing response because of the adsorbates-induced Schottky barrier variation. A simplified model is used to explain the experimental observations.

  18. Oxidation Resistance of Monolayer Group-IV Monochalcogenides.

    Science.gov (United States)

    Guo, Yu; Zhou, Si; Bai, Yizhen; Zhao, Jijun

    2017-04-05

    Ridged, orthorhombic two-dimensional (2D) group-V elemental and group IV-VI compound analogues of phosphorene provide a versatile platform for nanoelectronics, optoelectronics, and clean energy. However, phosphorene is vulnerable to oxygen in ambient air, which is a major obstacle for its applications. Regarding this issue, here we explore the oxidation behavior of monolayer group-IV monochalcogenides (GeS, GeSe, SnS, and SnSe), in comparison to that of phosphorene and arsenene by first-principles calculations. We find superior oxidation resistance of the monolayer group-IV monochalcogenides, with activation energies for the chemisorption of O2 on the 2D sheets in the range of 1.26-1.60 eV, about twice of the values of phosphorene and arsenene. The distinct oxidation behaviors of monolayer group-IV monochalcogenides and group-V phosphorene analogues originate from their different bond natures. Moreover, the chemisorption of a moderate amount of oxygen atoms does not severely deteriorate the electronic band structures of the monolayer group-IV monochalcogenides. These results shine light on the utilization of the monolayer group-IV monochalcogenides for next-generation 2D electronics and optoelectronics with high performance and stability.

  19. Experimental Research on High Temperature Resistance of Modified Lightweight Concrete after Exposure to Elevated Temperatures

    Directory of Open Access Journals (Sweden)

    Ke-cheng He

    2016-01-01

    Full Text Available In order to improve the spalling resistance of lightweight aggregate concrete at high temperature, two types of modified materials were used to modify clay ceramsite lightweight aggregates by adopting the surface coating modification method. Spalling of the concrete specimens manufactured by using the modified aggregates was observed during a temperature elevation. Mass loss and residual axial compressive strength of the modified concrete specimens after exposure to elevated temperatures were also tested. Concrete specimens consisting of ordinary clay ceramsites and crushed limestone were manufactured as references for comparison. The results showed that the ordinary lightweight concrete specimens and the crushed limestone concrete specimens were completely spalled after exposure to target temperatures above 400°C and 1000°C, respectively, whereas the modified concrete specimens remained intact at 1200°C, at which approximately 25% to 38% of the residual compressive strength was retained. The results indicated that the modified lightweight concrete specimens have exhibited superior mechanical properties and resistance to thermal spalling after exposure to elevated temperatures.

  20. Exploring the hypothesis that limiting diffusion of fungal oxidants underlies decay resistance in acetylated wood

    Science.gov (United States)

    Christopher G. Hunt; Steven Lacher; Kolby Hirth; Linda Lorenz; Kenneth E. Hammel

    2017-01-01

    The mechanisms by which chemical modifications, specifically acetylation, improve the decay resistance of wood are a topic of active research. In the early stages of decay, fungi secrete lowmolecular- weight oxidants or oxidant precursors. These oxidants diffuse through the wet wood cell wall and oxidize cell wall polymers, which enable the decay process to proceed....

  1. Revisiting Oxidative Dehydrogenation of Ethane by W Doping into MoVMn Mixed Oxides at Low Temperature

    Directory of Open Access Journals (Sweden)

    Mohammed H. Al-Hazmi

    2015-01-01

    Full Text Available The catalytic performance of MoVMnW mixed oxides was investigated in the oxidative dehydrogenation of ethane at three different reaction temperatures (235, 255, and 275°C using oxygen as an oxidant. The catalysts were characterized by using X-ray diffraction, temperature-programmed reduction, and scanning electron microscopy. The MoVMnW mixed oxide catalyst showed the 70–90% of ethylene selectivity at the reaction temperatures. However, a significant decrease in the selectivity of ethylene was observed by increasing the reaction temperature from 235°C to 275°C.

  2. Oxidative stress and antioxidant responses to progressive resistance exercise intensity in trained and untrained males

    OpenAIRE

    H Çakır-Atabek; F. Özdemir; Çolak, R.

    2015-01-01

    The relationship between oxidative stress and some exercise components of resistance exercise (e.g. intensity, exercise volume) has not been clearly defined. Additionally, the oxidative stress markers may respond differently in various conditions. This study aims to determine the effects of progressive intensity of resistance exercise (RE) on oxidative stress and antioxidants in trained and untrained men, and also to investigate the possible threshold intensity required to evoke oxidative str...

  3. Oxidation of TaSi2-Containing ZrB2-SiC Ultra-High Temperature Materials

    Science.gov (United States)

    Opila, Elizabeth J.; Smith, Jim; Levine, Stanley R.; Lorincz, Jonathan; Reigel, Marissa

    2010-01-01

    Hot pressed coupons of composition ZrB2-20 v% SiC-5 v% TaSi2 and ZrB2-20 v% SiC-20 v% TaSi2 were oxidized in stagnant air at temperatures of 1627 and 1927C for one, five and ten 10-minute cycles. The oxidation reactions were characterized by weight change kinetics, x-ray diffraction, and SEM/EDS. Detailed WDS/microprobe quantitative analyses of the oxidation products were conducted for the ZrB2-20 v% SiC-20 v% TaSi2 sample oxidized for five 10-minute cycles at 1927C. Oxidation kinetics and product formation were compared to ZrB2-20 v% SiC with no TaSi2 additions. It was found that the 20 v% TaSi2 composition exhibited improved oxidation resistance relative to the material with no TaSi2 additions at 1627C. However, for exposures at 1927C less oxidation resistance and extensive liquid phase formation were observed compared to the material with no TaSi2 additions. Attempts to limit the liquid phase formation by reducing the TaSi2 content to 5 v% were unsuccessful. In addition, the enhanced oxidation resistance at 1627C due to 20 v% TaSi2 additions was not achieved at the 5 v% addition level. The observed oxidation product evolution is discussed in terms of thermodynamics and phase equilibria for the TaSi2-containing ZrB2-SiC material system. TaSi2-additions to ZrB2-SiC at any level are not recommended for ultra-high temperature (>1900C) applications due to excessive liquid phase formation.

  4. Oxidation-resistant interfacial coatings for continuous fiber ceramic composites

    Energy Technology Data Exchange (ETDEWEB)

    Stinton, D.P.; Besmann, T.M.; Bleier, A. [Oak Ridge National Lab., TN (United States); Shanmugham, S.; Liaw, P.K. [Univ. of Tennessee, Knoxville, TN (United States)

    1995-08-01

    Continuous fiber ceramic composites mechanical behavior are influenced by the bonding characteristics between the fiber and the matrix. Finite modeling studies suggest that a low-modulus interfacial coating material will be effective in reducing the residual thermal stresses that are generated upon cooling from processing temperatures. Nicalon{trademark}/SiC composites with carbon, alumina and mullite interfacial coatings were fabricated with the SiC matrix deposited using a forced-flow, thermal gradient chemical vapor infiltration process. Composites with mullite interfacial coatings exhibited considerable fiber pull-out even after oxidation and have potential as a composite system.

  5. Design, microstructure, and high-temperature behavior of silicon nitride sintered with rate-earth oxides

    Energy Technology Data Exchange (ETDEWEB)

    Ciniculk, M.K. (California Univ., Berkeley, CA (United States). Dept. of Materials Science and Mineral Engineering)

    1991-08-01

    The processing-microstructure-property relations of silicon nitride ceramics sintered with rare-earth oxide additives have been investigated with the aim of improving their high-temperature behavior. The additions of the oxides of Y, Sm, Gd, Dy, Er, or Yb were compositionally controlled to tailor the intergranular phase. The resulting microstructure consisted of {beta}-Si{sub 3}N{sub 4} grains and a crystalline secondary phase of RE{sub 2}Si{sub 2}O{sub 7}, with a thin residual amorphous phase present at grain boundaries. The lanthanide oxides were found to be as effective as Y{sub 2}O{sub 3} in densifying Si{sub 3}N{sub 4}, resulting in identical microstructures. The crystallization behavior of all six disilicates was similar, characterized by a limited nucleation and rapid growth mechanism resulting in large single crystals. Complete crystallization of the intergranular phase was obtained with the exception of a residual amorphous, observed at interfaces and believed to be rich in impurities, the cause of incomplete devitrification. The low resistance to oxidation of these materials was attributed to the minimization of amorphous phases via devitrification to disilicates, compatible with SiO{sub 2}, the oxidation product of Si{sub 3}N{sub 4}. The strength retention of these materials at 1300{degrees}C was found to be between 80% and 91% of room-temperature strength, due to crystallization of the secondary phase and a residual but refractory amorphous grain-boundary phase. The creep behavior was found to be strongly dependent on residual amorphous phase viscosity as well as on the oxidation behavior, as evidenced by the nonsteady-state creep rates of all materials. 122 refs., 51 figs., 12 tabs.

  6. Growth and stability of oxidation resistant Si nanocrystals formed by decomposition of alkyl silanes

    Energy Technology Data Exchange (ETDEWEB)

    Zaitseva, N; Hamel, S; Dai, Z R; Saw, C; Williamson, A J; Galli, G

    2007-01-12

    The synthesis and characterization of 1-10 nm Si nanocrystals highly resistant to oxidation is described. The nanocrystals were prepared by thermal decomposition of tetramethylsilane at 680 C, or in a gold- induced catalytic process at lower temperatures down to 400-450 C using trioctylamine as an initial solvent. Transmission electron microscopic analysis of samples obtained in the presence of gold show that the nanocrystals form via solid-phase epitaxial attachment of Si to the gold crystal lattice. The results of computational modeling performed using first principles density functional theory (DFT) calculations predict that the enhanced stability of nanocrystals to oxidation is due to the presence of N or N-containing groups on the surface of nanocrystals.

  7. A micro-nano porous oxide hybrid for efficient oxygen reduction in reduced-temperature solid oxide fuel cells

    Science.gov (United States)

    Da Han; Liu, Xuejiao; Zeng, Fanrong; Qian, Jiqin; Wu, Tianzhi; Zhan, Zhongliang

    2012-01-01

    Tremendous efforts to develop high-efficiency reduced-temperature (≤ 600°C) solid oxide fuel cells are motivated by their potentials for reduced materials cost, less engineering challenge, and better performance durability. A key obstacle to such fuel cells arises from sluggish oxygen reduction reaction kinetics on the cathodes. Here we reported that an oxide hybrid, featuring a nanoporous Sm0.5Sr0.5CoO3−δ (SSC) catalyst coating bonded onto the internal surface of a high-porosity La0.9Sr0.1Ga0.8Mg0.2O3−δ (LSGM) backbone, exhibited superior catalytic activity for oxygen reduction reactions and thereby yielded low interfacial resistances in air, e.g., 0.021 Ω cm2 at 650°C and 0.043 Ω cm2 at 600°C. We further demonstrated that such a micro-nano porous hybrid, adopted as the cathode in a thin LSGM electrolyte fuel cell, produced impressive power densities of 2.02 W cm−2 at 650°C and 1.46 W cm−2 at 600°C when operated on humidified hydrogen fuel and air oxidant. PMID:22708057

  8. Segmented Thermoelectric Oxide-Based Module for High-Temperature Waste Heat Harvesting

    DEFF Research Database (Denmark)

    Le, Thanh Hung; Van Nong, Ngo; Han, Li

    2015-01-01

    We report a high-performance thermoelectric (TE) oxide-based module using the segmentation of half-Heusler Ti0.3Zr0.35Hf0.35CoSb0.8Sn0.2 and misfit-layered cobaltite Ca3Co4O9+δ as the p-leg and 2% Al-doped ZnO as the n-leg. The maximum output power of a 4-couple segmented module at ΔT=700 K attains...... a value of approximately 6.5 kWm-2, which is three times higher than that of the best reported non-segmented oxide module. The TE properties of individual legs, as well as the interfacial contact resistances, were characterized as a function of temperature. Numerical modeling was used to predict...

  9. Toughness testing and high-temperature oxidation evaluations of advanced alloys for core internals

    Energy Technology Data Exchange (ETDEWEB)

    Tan, Lizhen [ORNL; Pint, Bruce A [ORNL; Chen, Xiang [ORNL

    2016-09-16

    Alloy X-750 was procured from Carpenter Technology and Bodycote in this year. An appropriate TMT was developed on Alloy 439 to obtain materials with refined grain size for property screening tests. Charpy V-notch impact tests were completed for the three ferritic steels Grade 92, Alloy 439, and 14YWT. Fracture toughness tests at elevated temperatures were completed for 14YWT. The tests will be completed for the other alloys in next fiscal year. Steam oxidation tests of the three ferritic steels, 316L, and Zr–2.5Nb have been completed. The steam tests of the Ni-based superalloys and the other austenitic stainless steels will be continued and finished in next fiscal year. Performance ranking in terms of steam oxidation resistance and impact/fracture toughness of the alloys will be deduced.

  10. A review of processable high temperature resistant addition-type laminating resins

    Science.gov (United States)

    Serafini, T. T.; Delvigs, P.

    1973-01-01

    An important finding that resulted from research that was conducted to develop improved ablative resins was the discovery of a novel approach to synthesize processable high temperature resistant polymers. Low molecular weight polyimide prepolymers end-capped with norbornene groups were polymerized into thermo-oxidatively stable modified polyimides without the evolution of void producing volatile materials. This paper reviews basic studies that were performed using model compounds to elucidate the polymerization mechanism of the so-called addition-type polyimides. The fabrication and properties of polyimide/graphite fiber composites using A-type polyimide prepolymer as the matrix are described. An alternate method for preparing processable A-type polyimides by means of in situ polymerization of monomeric reactants on the fiber reinforcement is also described. Polyimide/graphite fiber composite performance at elevated temperatures is presented for A-type polyimides.

  11. Thin film materials and devices for resistive temperature sensing applications

    Science.gov (United States)

    Basantani, Hitesh A.

    Thin films of vanadium oxide (VOx) and hydrogenated amorphous silicon (a-Si:H) are the two dominant material systems used in resistive infrared radiation detectors (microbolometers) for sensing long wave infrared (LWIR) wavelengths in the 8--14 microm range. Typical thin films of VO x (x films of hydrogenated germanium (SiGe:H) have |TCR| between 3%/K to 4%/K. Devices made from either of these materials have resulted in similar device performance with NETD ≈ 25 mK. The performance of the microbolometers is limited by the electronic noise, especially 1/f noise. Therefore, regardless of the choice of bolometer sensing material and read out circuitry, manufacturers are constantly striving to reduce 1/f noise while simultaneously increasing TCR to give better signal to noise ratios in their bolometers and ultimately, better image quality with more thermal information to the end user. In this work, thin films of VOx and hydrogenated germanium (Ge:H), having TCR values > 4 %/K are investigated as potential candidates for higher sensitivity next generation of microbolometers. Thin films of VO x were deposited by Biased Target Ion Beam Deposition (BTIBD) (˜85 nm thick). Electrical characterization of lateral resistor structures showed resistivity ranging from 104 O--cm to 2.1 x 104 O--cm, TCR varying from --4%/K to --5%/K, normalized Hooge parameter (alphaH/n) of 5 x 10 -21 to 5 x 10-18 cm3. Thin films of Ge:H were deposited by plasma enhanced chemical vapor deposition (PECVD) by incorporating an increasing amount of crystal fraction in the growing thin films. Thin films of Ge:H having a mixed phase, amorphous + nanocrystalline, having a |TCR| > 6 %/K were deposited with resistivity Higher TCR materials are desired, however, such materials have higher resistivity and therefore unacceptable large electrical resistance in a lateral resistor configuration. This work looks at an alternate bolometer device design which incorporates higher TCR materials in a vertically

  12. Effects of 1000 C oxide surfaces on room temperature aqueous corrosion and environmental embrittlement of iron aluminides

    Energy Technology Data Exchange (ETDEWEB)

    Buchanan, R.A.; Perrin, R.L. [Univ. of Tennessee, Knoxville, TN (United States). Dept. of Materials Science and Engineering

    1997-12-01

    Results of electrochemical aqueous-corrosion studies at room temperature indicate that retained in-service-type high-temperature surface oxides (1000 C in air for 24 hours) on FA-129, FAL and FAL-Mo iron aluminides cause major reductions in pitting corrosion resistance in a mild acid-chloride solution designed to simulate aggressive atmospheric corrosion. Removal of the oxides by mechanical grinding restores the corrosion resistance. In a more aggressive sodium tetrathionate solution, designed to simulate an aqueous environment contaminated by sulfur-bearing combustion products, only active corrosion occurs for both the 1000 C oxide and mechanically cleaned surfaces at FAL. Results of slow-strain-rate stress-corrosion-cracking tests on FA-129, FAL and FAL-Mo at free-corrosion and hydrogen-charging potentials in the mild acid chloride solution indicate somewhat higher ductilities (on the order of 50%) for the 1000 C oxides retard the penetration of hydrogen into the metal substrates and, consequently, are beneficial in terms of improving resistance to environmental embrittlement. In the aggressive sodium tetrathionate solution, no differences are observed in the ductilities produced by the 1000 C oxide and mechanically cleaned surfaces for FAL.

  13. Page 1 Oxide dielectrics 177 given temperature or to higher ...

    Indian Academy of Sciences (India)

    -mºw-wºw-º-º-º-. 0. 909 1110 1428K 909 1 #10 1428K. 0.2 3.2 x 10'9 5.6 2.0 ().71 31.7 11.3 4.0. 1.0 1.6 x 10°0 2.8 1.3 0.54 35.3 16.4 6.8. 2.0 3.2 x 1030 2.0 1.0 0.45 35.8 17.9 8.1. Table 3. Room temperature resistivity of specimens heated in H, ...

  14. Proliferation resistance assessment of high temperature gas reactors

    Energy Technology Data Exchange (ETDEWEB)

    Chikamatsu N, M. A. [Instituto Tecnologico y de Estudios Superiores de Monterrey, Campus Santa Fe, Av. Carlos Lazo No. 100, Santa Fe, 01389 Mexico D. F. (Mexico); Puente E, F., E-mail: midori.chika@gmail.com [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2014-10-15

    The Generation IV International Forum has established different objectives for the new generation of reactors to accomplish. These objectives are focused on sustain ability, safety, economics and proliferation resistance. This paper is focused on how the proliferation resistance of the High Temperature Gas Reactors (HTGR) is assessed and the advantages that these reactors present currently. In this paper, the focus will be on explaining why such reactors, HTGR, can achieve the goals established by the GIF and can present a viable option in terms of proliferation resistance, which is an issue of great importance in the field of nuclear energy generation. The reason why the HTGR are being targeted in this writing is that these reactors are versatile, and present different options from modular reactors to reactors with the same size as the ones that are being operated today. Besides their versatility, the HTGR has designed features that might improve on the overall sustain ability of the nuclear reactors. This is because the type of safety features and materials that are used open up options for industrial processes to be carried out; cogeneration for instance. There is a small section that mentions how HTGR s are being developed in the international sector in order to present the current world view in this type of technology and the further developments that are being sought. For the proliferation resistance section, the focus is on both the intrinsic and the extrinsic features of the nuclear systems. The paper presents a comparison between the features of Light Water Reactors (LWR) and the HTGR in order to be able to properly compare the most used technology today and one that is gaining international interest. (Author)

  15. NO gas sensing at room temperature using single titanium oxide nanodot sensors created by atomic force microscopy nanolithography

    Directory of Open Access Journals (Sweden)

    Li-Yang Hong

    2016-07-01

    Full Text Available In this work, the fabrication of single titanium oxide nanodot (ND resistive sensors for NO gas sensing at room temperature is reported. Two atomic force microscopy nanolithography methods, nanomachining and nano-oxidation, are employed. A single titanium nanowire (NW is created first along with contact electrodes and a single titanium oxide ND is subsequently produced in the NW. Gas sensing is realized by the photo-activation and the photo-recovery approaches. It is found that a sensor with a smaller ND has better performance than a larger one. A response of 31%, a response time of 91 s, and a recovery time of 184 s have been achieved at a concentration of 10 ppm for a ND with a size of around 80 nm. The present work demonstrates the potential application of single metal oxide NDs for gas sensing with a performance that is comparable with that of metal oxide nanowire gas sensors.

  16. Fabrication of thermal-resistant gratings for high-temperature measurements using geometric phase analysis.

    Science.gov (United States)

    Zhang, Q; Liu, Z; Xie, H; Ma, K; Wu, L

    2016-12-01

    Grating fabrication techniques are crucial to the success of grating-based deformation measurement methods because the quality of the grating will directly affect the measurement results. Deformation measurements at high temperatures entail heating and, perhaps, oxidize the grating. The contrast of the grating lines may change during the heating process. Thus, the thermal-resistant capability of the grating becomes a point of great concern before taking measurements. This study proposes a method that combines a laser-engraving technique with the processes of particle spraying and sintering for fabricating thermal-resistant gratings. The grating fabrication technique is introduced and discussed in detail. A numerical simulation with a geometric phase analysis (GPA) is performed for a homogeneous deformation case. Then, the selection scheme of the grating pitch is suggested. The validity of the proposed technique is verified by fabricating a thermal-resistant grating on a ZrO2 specimen and measuring its thermal strain at high temperatures (up to 1300 °C). Images of the grating before and after deformation are used to obtain the thermal-strain field by GPA and to compare the results with well-established reference data. The experimental results indicate that this proposed technique is feasible and will offer good prospects for further applications.

  17. Fabrication of thermal-resistant gratings for high-temperature measurements using geometric phase analysis

    Science.gov (United States)

    Zhang, Q.; Liu, Z.; Xie, H.; Ma, K.; Wu, L.

    2016-12-01

    Grating fabrication techniques are crucial to the success of grating-based deformation measurement methods because the quality of the grating will directly affect the measurement results. Deformation measurements at high temperatures entail heating and, perhaps, oxidize the grating. The contrast of the grating lines may change during the heating process. Thus, the thermal-resistant capability of the grating becomes a point of great concern before taking measurements. This study proposes a method that combines a laser-engraving technique with the processes of particle spraying and sintering for fabricating thermal-resistant gratings. The grating fabrication technique is introduced and discussed in detail. A numerical simulation with a geometric phase analysis (GPA) is performed for a homogeneous deformation case. Then, the selection scheme of the grating pitch is suggested. The validity of the proposed technique is verified by fabricating a thermal-resistant grating on a ZrO2 specimen and measuring its thermal strain at high temperatures (up to 1300 °C). Images of the grating before and after deformation are used to obtain the thermal-strain field by GPA and to compare the results with well-established reference data. The experimental results indicate that this proposed technique is feasible and will offer good prospects for further applications.

  18. Tungsten oxide thin films grown by thermal evaporation with high resistance to leaching

    Energy Technology Data Exchange (ETDEWEB)

    Correa, Diogo S. [Universidade Federal de Pelotas (UFPel), RS (Brazil). Centro de Ciencias Quimicas, Farmaceuticas e de Alimentos; Pazinato, Julia C.O.; Freitas, Mauricio A. de; Radtke, Claudio; Garcia, Irene T.S., E-mail: irene@iq.ufrgs.br [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Instituto de Quimica; Dorneles, Lucio S. [Universidade Federal de Santa Maria (UFSM), RS (Brazil). Centro de Ciencias Naturais e Exatas

    2014-05-15

    Tungsten oxides show different stoichiometries, crystal lattices and morphologies. These characteristics are important mainly when they are used as photocatalysts. In this work tungsten oxide thin films were obtained by thermal evaporation on (100) silicon substrates covered with gold and heated at 350 and 600 °C, with different deposition times. The stoichiometry of the films, morphology, crystal structure and resistance to leaching were characterized through X-ray photoelectron spectroscopy, micro-Raman spectroscopy, scanning and transmission electron microscopy, X-ray diffractometry, Rutherford backscattering spectrometry and O{sup 16} (α,α')O{sup 16} resonant nuclear reaction. Films obtained at higher temperatures show well-defined spherical nanometric structure; they are composed of WO{sub 3.1} and the presence of hydrated tungsten oxide was also observed. The major crystal structure observed is the hexagonal. Thin films obtained through thermal evaporation present resistance to leaching in aqueous media and excellent performance as photocatalysts, evaluated through the degradation of the methyl orange dye. (author)

  19. Green synthesis of Ni-Nb oxide catalysts for low-temperature oxidative dehydrogenation of ethane

    KAUST Repository

    Zhu, Haibo

    2015-03-05

    The straightforward solid-state grinding of a mixture of Ni nitrate and Nb oxalate crystals led to, after mild calcination (T<400°C), nanostructured Ni-Nb oxide composites. These new materials efficiently catalyzed the oxidative dehydrogenation (ODH) of ethane to ethylene at a relatively low temperature (T<300°C). These catalysts appear to be much more stable than the corresponding composites prepared by other chemical methods; more than 90% of their original intrinsic activity was retained after 50h with time on-stream. Furthermore, the stability was much less affected by the Nb content than in composites prepared by classical "wet" syntheses. These materials, obtained in a solvent-free way, are thus promising green and sustainable alternatives to the current Ni-Nb candidates for the low-temperature ODH of ethane.

  20. Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1982-01-01

    1.1 This test method covers the apparatus and procedure for the determination of the weight loss of carbon fibers, exposed to ambient hot air, as a means of characterizing their oxidative resistance. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units which are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard information, see Section 8.

  1. Effect of annealing temperature on structural, optical and electrical properties of hydrothermal assisted zinc oxide nanorods

    Energy Technology Data Exchange (ETDEWEB)

    Narayanan, Guru Nisha; Sankar Ganesh, R.; Karthigeyan, A., E-mail: karthigeyan.a@ktr.srmuniv.ac.in

    2016-01-01

    Zinc oxide nanorods were grown employing a low cost hydrothermal method on microslide glass substrates pre-coated with ZnO seed layer. The as grown nanorods were annealed in air at 350 °C, 450 °C and 550 °C. The effect of annealing at different temperatures on morphology, structural, optical and electrical properties was investigated using field emission scanning electron microscopic, X-ray diffraction, UV–vis spectral, photoluminescence and electrical studies. The X-ray diffraction pattern of all the samples showed wurtzite structure preferentially oriented along the c-axis (0 0 2) direction. It was found that diameter of the nanorods increased with increasing of annealing temperature. The UV–vis absorption spectra showed a red shift from which it was inferred that the optical bandgap of the material decreases from 3.33 eV to 3.28 eV with increase in annealing temperature. Photoluminescence measurements showed increase in the UV emission intensity with respect to annealing temperature and also produced additional peaks attributed to defects and impurities. Annealing the ZnO nanorod structures at various temperatures evidently showed that the sample annealed at 550 °C acquired the lowest resistivity about 1.62 × 10{sup −4} Ω-cm. - Highlights: • ZnO nanorods were synthesized by hydrothermal method on microslide glass substrates. • Pre-deposited ZnO seeds were used. • Structural, optical and electrical properties of ZnO nanorods were studied. • Crystalline structure of ZnO nanorods was improved with increase in annealing temperature. • Resistivity decrease was observed with increase in the annealing temperature.

  2. Compartmentalized nitric oxide signaling in the resistance vasculature.

    Science.gov (United States)

    Mutchler, Stephanie M; Straub, Adam C

    2015-09-15

    Nitric oxide (NO) was first described as a bioactive molecule through its ability to stimulate soluble guanylate cyclase, but the revelation that NO was the endothelium derived relaxation factor drove the field to its modern state. The wealth of research conducted over the past 30 years has provided us with a picture of how diverse NO signaling can be within the vascular wall, going beyond simple vasodilation to include such roles as signaling through protein S-nitrosation. This expanded view of NO's actions requires highly regulated and compartmentalized production. Importantly, resistance arteries house multiple proteins involved in the production and transduction of NO allowing for efficient movement of the molecule to regulate vascular tone and reactivity. In this review, we focus on the many mechanisms regulating NO production and signaling action in the vascular wall, with a focus on the control of endothelial nitric oxide synthase (eNOS), the enzyme responsible for synthesizing most of the NO within these confines. We also explore how cross talk between the endothelium and smooth muscle in the microcirculation can modulate NO signaling, illustrating that this one small molecule has the capability to produce a plethora of responses. Copyright © 2015 Elsevier Inc. All rights reserved.

  3. Regulation of obesity and insulin resistance by nitric oxide.

    Science.gov (United States)

    Sansbury, Brian E; Hill, Bradford G

    2014-08-01

    Obesity is a risk factor for developing type 2 diabetes and cardiovascular disease and has quickly become a worldwide pandemic with few tangible and safe treatment options. Although it is generally accepted that the primary cause of obesity is energy imbalance, i.e., the calories consumed are greater than are utilized, understanding how caloric balance is regulated has proven a challenge. Many "distal" causes of obesity, such as the structural environment, occupation, and social influences, are exceedingly difficult to change or manipulate. Hence, molecular processes and pathways more proximal to the origins of obesity-those that directly regulate energy metabolism or caloric intake-seem to be more feasible targets for therapy. In particular, nitric oxide (NO) is emerging as a central regulator of energy metabolism and body composition. NO bioavailability is decreased in animal models of diet-induced obesity and in obese and insulin-resistant patients, and increasing NO output has remarkable effects on obesity and insulin resistance. This review discusses the role of NO in regulating adiposity and insulin sensitivity and places its modes of action into context with the known causes and consequences of metabolic disease. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

  4. REGULATION OF OBESITY AND INSULIN RESISTANCE BY NITRIC OXIDE

    Science.gov (United States)

    Sansbury, Brian E.; Hill, Bradford G.

    2014-01-01

    Obesity is a risk factor for developing type 2 diabetes and cardiovascular disease and has quickly become a world-wide pandemic with few tangible and safe treatment options. While it is generally accepted that the primary cause of obesity is energy imbalance, i.e., the calories consumed are greater than are utilized, understanding how caloric balance is regulated has proven a challenge. Many “distal” causes of obesity, such as the structural environment, occupation, and social influences, are exceedingly difficult to change or manipulate. Hence, molecular processes and pathways more proximal to the origins of obesity—those that directly regulate energy metabolism or caloric intake—appear to be more feasible targets for therapy. In particular, nitric oxide (NO) is emerging as a central regulator of energy metabolism and body composition. NO bioavailability is decreased in animal models of diet-induced obesity and in obese and insulin resistant patients, and increasing NO output has remarkable effects on obesity and insulin resistance. This review discusses the role of NO in regulating adiposity and insulin sensitivity and places its modes of action into context with the known causes and consequences of metabolic disease. PMID:24878261

  5. Unipolar resistive switching in metal oxide/organic semiconductor non-volatile memories as a critical phenomenon

    Energy Technology Data Exchange (ETDEWEB)

    Bory, Benjamin F.; Meskers, Stefan C. J., E-mail: s.c.j.meskers@tue.nl [Molecular Materials and Nanosystems and Institute for Complex Molecular Systems, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven (Netherlands); Rocha, Paulo R. F. [Instituto de Telecomunicações, Av. Rovisco, Pais, 1, 1049-001 Lisboa, Portugal and Universidade do Algarve, Campus de Gambelas, 8005-139 Faro (Portugal); Max-Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz (Germany); Gomes, Henrique L. [Instituto de Telecomunicações, Av. Rovisco, Pais, 1, 1049-001 Lisboa, Portugal and Universidade do Algarve, Campus de Gambelas, 8005-139 Faro (Portugal); Leeuw, Dago M. de [Max-Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz (Germany)

    2015-11-28

    Diodes incorporating a bilayer of an organic semiconductor and a wide bandgap metal oxide can show unipolar, non-volatile memory behavior after electroforming. The prolonged bias voltage stress induces defects in the metal oxide with an areal density exceeding 10{sup 17 }m{sup −2}. We explain the electrical bistability by the coexistence of two thermodynamically stable phases at the interface between an organic semiconductor and metal oxide. One phase contains mainly ionized defects and has a low work function, while the other phase has mainly neutral defects and a high work function. In the diodes, domains of the phase with a low work function constitute current filaments. The phase composition and critical temperature are derived from a 2D Ising model as a function of chemical potential. The model predicts filamentary conduction exhibiting a negative differential resistance and nonvolatile memory behavior. The model is expected to be generally applicable to any bilayer system that shows unipolar resistive switching.

  6. Conductive Protection Layers on Oxidation Resistant Alloys for SOFC Interconnect Applications

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Zhenguo; Xia, Guanguang; Maupin, Gary D.; Stevenson, Jeffry W.

    2006-12-20

    Conductive oxide coatings are used as protection layers on metallic interconnects in SOFCs to improve their surface stability and electrical performance, as well as to mitigate or prevent chromium poisoning to cells. This paper discusses materials requirements for this particular application and summarizes our systematic study on varied conductive oxides as potential candidate materials for protection layers on stainless steel substrates. Overall, it appeared that chromites such as (La,Sr)CrO3 improved surface stability, but might not be good candidates for the protection layer applications due to chromium vaporization, albeit at a lower rate than Cr2O3, from these oxides at high temperatures in air or moist air. The application of non-chromite perovskite (La,Sr)FeO3 protection layers resulted in improved oxidation resistance and electrical performance. It is doubtful, however, that LSF can be an effective barrier to prevent chromium release during long term SOFC stack operation due to chromium diffusion through the LSF coatings. With a high oxygen ion conductivity, the coatings of Sn-doped In2O3 failed to provide protection to the metal substrate and are thus not suitable for the protection layer applications. The best performance was achieved using thermally-grown (Mn,Co)3O4 spinel protection layers that substantially improved the surface stability of the metal substrates, and prevented chromium outward migration.

  7. Corrosion resistance of a steel under an oxidizing atmosphere in a fluid catalytic cracking regenerator

    Directory of Open Access Journals (Sweden)

    Ieda Caminha

    2004-03-01

    Full Text Available In the present work, the corrosion resistance of an ASTM A 387 G11 steel was evaluated under two conditions: an oxidizing atmosphere in a fluid catalytic cracking regenerator of a petroleum processing unit and a simulated atmosphere in the laboratory, at temperatures of 650 °C and 700 °C. The characterization of the phases present in the oxidized layer was carried out by X-ray diffraction (XRD, optical microscopy (OM and scanning electron microscopy (SEM with X-ray energy dispersive analysis (EDS. Severe corrosion was observed after exposure to both the real and simulated conditions, with formation of several iron oxides (Fe2O3, Fe3O4 and FeO in the product scale layer, as well as a slight inner oxidation and sulfidation of chromium in the substrate. Internal nitridation of the silicon and the manganese was observed only in the real condition, probably related to the long-term exposure inside the regenerator.

  8. Thin-film resistance temperature detector array for the measurement of temperature distribution inside a phantom

    Science.gov (United States)

    Sim, Jai Kyoung; Hyun, Jaeyub; Doh, Il; Ahn, Bongyoung; Kim, Yong Tae

    2018-02-01

    A thin-film resistance temperature detector (RTD) array is proposed to measure the temperature distribution inside a phantom. HIFU (high-intensity focused ultrasound) is a non-invasive treatment method using focused ultrasound to heat up a localized region, so it is important to measure the temperature distribution without affecting the ultrasonic field and heat conduction. The present 25 µm thick PI (polyimide) film is transparent not only to an ultrasonic field, because its thickness is much smaller than the wavelength of ultrasound, but also to heat conduction, owing to its negligible thermal mass compared to the phantom. A total of 33 RTDs consisting of Pt resistors and interconnection lines were patterned on a PI substrate using MEMS (microelectromechanical systems) technology, and a polymer phantom was fabricated with the film at the center. The expanded uncertainty of the RTDs was 0.8 K. In the experimental study using a 1 MHz HIFU transducer, the maximum temperature inside the phantom was measured as 70.1 °C just after a HIFU excitation of 6.4 W for 180 s. The time responses of the RTDs at different positions also showed the residual heat transfer inside the phantom after HIFU excitation. HIFU results with the phantom showed that a thin-film RTD array can measure the temperature distribution inside a phantom.

  9. Excellent resistive switching property and physical mechanism of amorphous TiO{sub 2} thin films fabricated by a low-temperature photochemical solution deposition method

    Energy Technology Data Exchange (ETDEWEB)

    Zou, Lilan; Hu, Wei; Xie, Wei; Chen, Ruqi; Qin, Ni; Li, Baojun; Bao, Dinghua, E-mail: stsbdh@mail.sysu.edu.cn

    2014-08-30

    Highlights: • High-performance resistive switching Pt/TiO{sub 2}/Pt memory cells were obtained. • Amorphous TiO{sub 2} layer was prepared by low-temperature photochemical deposition. • Pt/TiO{sub 2}/Pt memory cells exhibited excellent resistive switching parameters. • UV irradiation led to the formation of enhanced metal-oxide bonds. • Resistive switching corresponded to the formation/rupture of conductive filaments. - Abstract: High-performance resistive switching Pt/TiO{sub 2}/Pt memory cells were fabricated. The amorphous TiO{sub 2} active layer was prepared by using a low-temperature photochemical solution deposition method—a simple preparation process combining first chemical solution deposition of the TiO{sub 2} film layer and subsequent ultraviolet (UV) irradiation treatment. The obtained Pt/TiO{sub 2}/Pt memory cells exhibited excellent resistive switching parameters, such as centralized distribution of set and reset voltages, stable current values at high and low resistance states, and long retention time. The conductive mechanisms of high resistance state and low resistance state were Schottky emission and Ohmic conduction, respectively. The X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and scanning electron microscopy characterization of the TiO{sub 2} thin films indicated that the UV irradiation treatment can lead to decomposition of the residual organics and the formation of enhanced metal-oxide bonds in the thin films. On the basis of the analysis of current–voltage characteristics and the temperature dependence of resistance, we explained the resistive switching phenomenon for Pt/TiO{sub 2}/Pt devices by using the model of formation/rupture of conductive filaments. Our study also suggested that the simple photochemical solution deposition method can be used for preparing some other oxide thin films with good resistive switching properties at low processing temperature which is promising to be extended to

  10. Mutations in the RAM network confer resistance to the thiol oxidant 4,4'-dipyridyl disulfide

    DEFF Research Database (Denmark)

    López-Mirabal, H Reynaldo; Winther, Jakob R; Thorsen, Michael

    2008-01-01

    might relate to bypass for abnormal septum-associated protein sorting. The broad resistance toward oxidants (DPS, diamide and H(2)O(2)) of the Deltacts1 strain links cell wall function to the resistance to oxidative stress and suggests the existence of targets that are common for these oxidants.......-specific oxidant dipyridyl disulfide (DPS) yielded tao3-516, which is impaired in the function of the RAM signaling network protein Tao3/Pag1p. We suggest that the DPS-resistance of the tao3-516 mutant might be due to deficient cell-cycle-regulated production of the chitinase Cts1p, which functions in post...

  11. The development of titanium silicide - boron doped polysilicon resistive temperature sensors

    NARCIS (Netherlands)

    Vereshchagina, E.; Vereshchagina, E.; Wolters, Robertus A.M.; Gardeniers, Johannes G.E.

    2011-01-01

    Thin films of titanium silicide (TiSi2) formed on heavily boron-doped polycrystalline silicon (poly-Si/B+) were applied for the first time for resistive temperature sensing. The temperature sensors exhibited a high-temperature coefficient of resistance of 3.8 × 10−3 ◦C−1, a linear dependence of

  12. Iron-niobium-aluminum alloy having high-temperature corrosion resistance

    Science.gov (United States)

    Hsu, Huey S.

    1988-04-14

    An alloy for use in high temperature sulfur and oxygen containing environments, having aluminum for oxygen resistance, niobium for sulfur resistance and the balance iron, is discussed. 4 figs., 2 tabs.

  13. Investigation on low room-temperature resistivity Cr/(Ba0.85Pb0.15)TiO3 positive temperature coefficient composites

    DEFF Research Database (Denmark)

    He, Zeming; Ma, J.; Qu, Yuanfang

    2009-01-01

    Low room-temperature resistivity positive temperature coefficient (PTC) Cr/(Ba0.85Pb0.15)TiO3 composites were produced via a reducing sintering and a subsequent oxidation treatment. The effects of metallic content and processing conditions on materials resistivity–temperature properties were...... discussed. Using these special processes, the prepared composite with 20 wt% Cr possessed low room-temperature resistivity (2.96 Ω cm at 25 °C) and exhibited PTC effect (resistivity jump of 10), which is considered as a promising candidate for over-current protector when working at low voltage. The grain......-boundary potential barrier of the prepared PTC composite was evaluated based on the Heywang model and the experimental data. The potential barrier was from 0.00 to 0.11 V in the temperature range of 180–270 °C, which is believed to be the first reported intrinsic parameter for PTC composite, determined from...

  14. Device performances of organic light-emitting diodes with indium tin oxide, gallium zinc oxide, and indium zinc tin oxide anodes deposited at room temperature.

    Science.gov (United States)

    Lee, Changhun; Ko, Yoonduk; Kim, Youngsung

    2013-12-01

    Thin films of Indium tin oxide (ITO), Gallium zinc oxide (GZO), and Indium zinc tin oxide (IZTO) were deposited on glass substrates by pulsed direct current magnetron sputtering at room temperature. The structural, optical, and electrical properties of the films were investigated towards evaluating their applications as flexible anodes. IZTO films exhibited the lowest resistivity (6.3 x 10(-4) Omega cm). Organic light-emitting diodes (OLEDs) were fabricated using the ITO, GZO, and IZTO films as anode layers. The turn-on voltages at a current density of 4.5 mA/cm2, 5.5 mA/cm2, 6.5 mA/cm2 were 5.5 V, 13.7 V, and 4.7 V for the devices with ITO, GZO, and IZTO anodes, respectively. The best performance was observed with the IZTO film, indicating its suitability as an alternative material for conventional ITO anodes used in OLEDs and flexible displays.

  15. Electrical Properties of Materials for Elevated Temperature Resistance Strain Gage Application. Ph.D. Thesis

    Science.gov (United States)

    Lei, Jih-Fen

    1987-01-01

    The objective was to study the electrical resistances of materials that are potentially useful as resistance strain gages at 1000 C. Transition metal carbides and nitrides, boron carbide and silicon carbide were selected for the experimental phase of this research. Due to their low temperature coefficient of resistance and good stability, TiC, ZrC, B sub 4 C and beta-SiC are suggested as good candidates for high temperature resistance strain gage applications.

  16. Systematic investigation of the synthesis, characterization and switching mechanism of metal oxide nanoparticle resists

    Science.gov (United States)

    Siauw, Meiliana; Du, Ke; Valade, David; Trefonas, Peter; Thackeray, James W.; Whittaker, Andrew; Blakey, Idriss

    2016-03-01

    Metal oxide nanoparticle resists have recently emerged as next generation photoresist materials which exhibit promising performance for extreme ultraviolet lithography. In this present work, we are able to show our ability to synthesize and well characterize small uniform metal oxide nanoparticles, to present stability study of the nanoparticles in the resist solvent over time, to pattern ~20 nm features by electron beam lithography, and to provide an insight into the insolubilization mechanism of the resist system.

  17. Hydrogen reduction of molybdenum oxide at room temperature

    Science.gov (United States)

    Borgschulte, Andreas; Sambalova, Olga; Delmelle, Renaud; Jenatsch, Sandra; Hany, Roland; Nüesch, Frank

    2017-01-01

    The color changes in chemo- and photochromic MoO3 used in sensors and in organic photovoltaic (OPV) cells can be traced back to intercalated hydrogen atoms stemming either from gaseous hydrogen dissociated at catalytic surfaces or from photocatalytically split water. In applications, the reversibility of the process is of utmost importance, and deterioration of the layer functionality due to side reactions is a critical challenge. Using the membrane approach for high-pressure XPS, we are able to follow the hydrogen reduction of MoO3 thin films using atomic hydrogen in a water free environment. Hydrogen intercalates into MoO3 forming HxMoO3, which slowly decomposes into MoO2 +1/2 H2O as evidenced by the fast reduction of Mo6+ into Mo5+ states and slow but simultaneous formation of Mo4+ states. We measure the decrease in oxygen/metal ratio in the thin film explaining the limited reversibility of hydrogen sensors based on transition metal oxides. The results also enlighten the recent debate on the mechanism of the high temperature hydrogen reduction of bulk molybdenum oxide. The specific mechanism is a result of the balance between the reduction by hydrogen and water formation, desorption of water as well as nucleation and growth of new phases.

  18. Effect of the burning temperature on the phase composition, photovoltaic response, and electrical properties of Ag/Pd resistive films

    Science.gov (United States)

    Mikheev, G. M.; Saushin, A. S.; Goncharov, O. Yu.; Dorofeev, G. A.; Gil'mutdinov, F. Z.; Zonov, R. G.

    2014-11-01

    Silver-palladium (Ag/Pd) films were grown by thick-film technology using a resistive paste consisting of Pd, Ag2O, and glass on ceramic substrates at burning temperatures of 878, 1013, and 1113 K. The effect of the burning temperature and Pd content in the initial paste on the phase composition, resistivity, photovoltaic properties of films, free carrier concentration, and mobility was studied. It was found that the films grown at a burning temperature of 878 K have the greatest factor of conversion of the pulsed laser power to the photovoltaic signal, which depends on the direction of the incident radiation wave vector. Using X-ray diffraction, X-ray photoelectron spectroscopy, and thermodynamic modeling, it was shown that the AgPd alloy and PdO oxide are the main components of the Ag/Pd film with photovoltaic properties.

  19. Development of High Temperature/High Sensitivity Novel Chemical Resistive Sensor

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Chunrui [Univ. of Texas, San Antonio, TX (United States); Enriquez, Erik [Univ. of Texas, San Antonio, TX (United States); Wang, Haibing [Univ. of Texas, San Antonio, TX (United States); Xu, Xing [Univ. of Texas, San Antonio, TX (United States); Bao, Shangyong [Univ. of Texas, San Antonio, TX (United States); Collins, Gregory [Univ. of Texas, San Antonio, TX (United States)

    2013-08-13

    The research has been focused to design, fabricate, and develop high temperature/high sensitivity novel multifunctional chemical sensors for the selective detection of fossil energy gases used in power and fuel systems. By systematically studying the physical properties of the LnBaCo2O5+d (LBCO) [Ln=Pr or La] thin-films, a new concept chemical sensor based high temperature chemical resistant change has been developed for the application for the next generation highly efficient and near zero emission power generation technologies. We also discovered that the superfast chemical dynamic behavior and an ultrafast surface exchange kinetics in the highly epitaxial LBCO thin films. Furthermore, our research indicates that hydrogen can superfast diffuse in the ordered oxygen vacancy structures in the highly epitaxial LBCO thin films, which suggest that the LBCO thin film not only can be an excellent candidate for the fabrication of high temperature ultra sensitive chemical sensors and control systems for power and fuel monitoring systems, but also can be an excellent candidate for the low temperature solid oxide fuel cell anode and cathode materials.

  20. Influence of temperature on oxidation behaviour of ZE41 magnesium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, M.D., E-mail: mariadolores.lopez@urjc.e [Dpto. de Ciencia e Ingenieria de Materiales, Universidad Rey Juan Carlos, 28933 Mostoles (Spain); Munez, C.J. [Dpto. de Ciencia e Ingenieria de Materiales, Universidad Rey Juan Carlos, 28933 Mostoles (Spain); Carboneras, M. [Dpto. de Ciencia e Ingenieria de Materiales, Universidad Rey Juan Carlos, 28933 Mostoles (Spain); Centro Nacional de Investigaciones Metalurgicas (CENIM), CSIC, 28040 Madrid (Spain); Rodrigo, P.; Escalera, M.D.; Otero, E. [Dpto. de Ciencia e Ingenieria de Materiales, Universidad Rey Juan Carlos, 28933 Mostoles (Spain)

    2010-02-18

    The influence of temperature on the oxidation behaviour of commercial ZE41 magnesium alloy has been studied. Thermogravimetric tests were carried out to determine the oxidation kinetics in the 350-500 {sup o}C range. Morphology and growth of the oxidation films were analysed by Scanning Electronic Microscopy (SEM), Energy Dispersive X-Ray Spectrometry (EDS) and X-Ray Diffraction (XRD). It was found that the oxidation kinetics initially follow a parabolic law, following a linear law for higher exposure times. Results also showed that the protective nature of the oxide layer depends on the oxidation temperature. At temperatures in the range of 350-450 {sup o}C the ZE41 alloy is covered by a protective oxide layer, very thin and compact, whereas the oxide layer formed at 500 {sup o}C exhibits a non-protective nature, showing an 'oxide sponges' morphology.

  1. Study on the Hydrogen Generation Rules of Coal Oxidation at Low Temperature

    OpenAIRE

    Shao He; Zhou Fubao; Chen Kaiyan; Cheng Jianwei; Melogh, Palu H.

    2014-01-01

    Based on a hydrogen desorption experiment and a comparative experiment of low-temperature coal oxidation performed prior to and after hydrogen desorption, this paper demonstrates the occurrence of hydrogen adsorption in coal at room temperature and reveals that the hydrogen generated in the process of coal oxidation originates from coal oxidation and desorption. The results show that the hydrogen accumulation generated only by coal oxidation and the hydrogen accumulation generated...

  2. Low Temperature Constrained Sintering of Cerium Gadolinium OxideFilms for Solid Oxide Fuel Cell Applications

    Energy Technology Data Exchange (ETDEWEB)

    Nicholas, Jason Dale [Univ. of California, Berkeley, CA (United States)

    2007-01-01

    Cerium gadolinium oxide (CGO) has been identified as an acceptable solid oxide fuel cell (SOFC) electrolyte at temperatures (500-700 C) where cheap, rigid, stainless steel interconnect substrates can be used. Unfortunately, both the high sintering temperature of pure CGO, >1200 C, and the fact that constraint during sintering often results in cracked, low density ceramic films, have complicated development of metal supported CGO SOFCs. The aim of this work was to find new sintering aids for Ce0.9Gd0.1O1.95, and to evaluate whether they could be used to produce dense, constrained Ce0.9Gd0.1O1.95 films at temperatures below 1000 C. To find the optimal sintering aid, Ce0.9Gd0.1O1.95 was doped with a variety of elements, of which lithium was found to be the most effective. Dilatometric studies indicated that by doping CGO with 3mol% lithium nitrate, it was possible to sinter pellets to a relative density of 98.5% at 800 C--a full one hundred degrees below the previous low temperature sintering record for CGO. Further, it was also found that a sintering aid's effectiveness could be explained in terms of its size, charge and high temperature mobility. A closer examination of lithium doped Ce0.9Gd0.1O1.95 indicated that lithium affects sintering by producing a Li2O-Gd2O3-CeO2 liquid at the CGO grain boundaries. Due to this liquid phase sintering, it was possible to produce dense, crack-free constrained films of CGO at the record low temperature of 950 C using cheap, colloidal spray deposition processes. This is the first time dense constrained CGO films have been produced below 1000 C and could help commercialize metal supported ceria based solid oxide fuel cells.

  3. Genome-wide association analysis of oxidative stress resistance in Drosophila melanogaster.

    Directory of Open Access Journals (Sweden)

    Allison L Weber

    Full Text Available Aerobic organisms are susceptible to damage by reactive oxygen species. Oxidative stress resistance is a quantitative trait with population variation attributable to the interplay between genetic and environmental factors. Drosophila melanogaster provides an ideal system to study the genetics of variation for resistance to oxidative stress.We used 167 wild-derived inbred lines of the Drosophila Genetic Reference Panel for a genome-wide association study of acute oxidative stress resistance to two oxidizing agents, paraquat and menadione sodium bisulfite. We found significant genetic variation for both stressors. Single nucleotide polymorphisms (SNPs associated with variation in oxidative stress resistance were often sex-specific and agent-dependent, with a small subset common for both sexes or treatments. Associated SNPs had moderately large effects, with an inverse relationship between effect size and allele frequency. Linear models with up to 12 SNPs explained 67-79% and 56-66% of the phenotypic variance for resistance to paraquat and menadione sodium bisulfite, respectively. Many genes implicated were novel with no known role in oxidative stress resistance. Bioinformatics analyses revealed a cellular network comprising DNA metabolism and neuronal development, consistent with targets of oxidative stress-inducing agents. We confirmed associations of seven candidate genes associated with natural variation in oxidative stress resistance through mutational analysis.We identified novel candidate genes associated with variation in resistance to oxidative stress that have context-dependent effects. These results form the basis for future translational studies to identify oxidative stress susceptibility/resistance genes that are evolutionary conserved and might play a role in human disease.

  4. Magnetocaloric effect at cryogenic temperature in gadolinium oxide nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Paul, Rima, E-mail: rima.paul@saha.ac.in [Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata 700064 (India); Paramanik, Tapas; Das, Kalipada [Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata 700064 (India); Sen, Pintu [Variable Energy Cyclotron Centre, 1/AF Bidhannagar, Kolkata 700064 (India); Satpati, B.; Das, I. [Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata 700064 (India)

    2016-11-01

    We have synthesized fascinating nano-structure of Gadolinium oxide (Gd{sub 2}O{sub 3}) using controlled template-assisted electrochemical deposition technique which showed interesting anisotropic magnetic behavior. The nanotubes of Gd{sub 2}O{sub 3} with average diameter 200 nm, length 10 µm and wall thickness 20 nm are constituted of nanoclusters with average diameter 7.5 nm. The tubes are aligned and are almost uniform throughout their length. Detailed magnetic measurements of aligned Gd{sub 2}O{sub 3} nanotubes have been performed for both parallel and perpendicular magnetic field orientations with respect to the axis of the Gd{sub 2}O{sub 3} nanotube array. Significant differences in magnetization values have been observed between the parallel and perpendicular orientations. Experimental results indicate the superparamagnetic nature of the nanomaterial. Large magnetocaloric effect, associated with the sharp change in magnetization of the Gd{sub 2}O{sub 3} nanotubes, has been observed in the cryogenic temperature regime that shows anisotropic behavior. - Highlights: • Gd{sub 2}O{sub 3} nanotubes of diameter ~200 nm synthesized through electrochemical technique. • The nanotubes are superparamagnetic in nature. • At cryogenic temperature, the nanotubes exhibit large magnetocaloric anisotropic effect.

  5. Room temperature transparent conducting magnetic oxide (TCMO properties in heavy ion doped oxide semiconductor

    Directory of Open Access Journals (Sweden)

    Juwon Lee

    2017-08-01

    Full Text Available Bismuth doped ZnO (ZnBi0.03O0.97 thin films are grown using pulsed laser deposition. The existence of positively charged Bi, absence of metallic zinc and the Zn-O bond formation in Bi doped ZnO are confirmed using X-ray Photoelectron Spectroscopy (XPS. Temperature dependent resistivity and UV-visible absorption spectra show lowest resistivity with 8.44 × 10-4 Ω cm at 300 K and average transmittance of 93 % in the visible region respectively. The robust ferromagnetic signature is observed at 350 K (7.156 × 10-4 emu/g. This study suggests that Bi doped ZnO films should be a potential candidate for spin based optoelectronic applications.

  6. Role of bottom-fermenting brewer's yeast KEX2 in high temperature resistance and poor proliferation at low temperatures.

    Science.gov (United States)

    Yamagishi, Hiromi; Ohnuki, Shinsuke; Nogami, Satoru; Ogata, Tomoo; Ohya, Yoshikazu

    2010-08-01

    Variants of bottom-fermenting brewer's yeast that grew at high temperatures and showed poor proliferation and fermentation at low temperatures were isolated. Similar variants of laboratory yeast were also isolated and found to be incapable of mating. The KEX2 gene was cloned by complementation. It was shown to be responsible for these traits, because a KEX2 disruptant of Saccharomyces cerevisiae (S. cerevisiae) laboratory yeast grew poorly at low temperatures and was resistant to high temperatures. In addition, a Saccharomyces bayanus (S. bayanus)-type KEX2 (Sb-KEX2) disruptant of bottom-fermenting brewer's yeast grew poorly at low temperatures and was resistant to high temperatures. The KEX2 gene product plays an important role in proliferation of yeast at low temperatures, which is an important trait of bottom-fermenting brewer's yeast. These findings advance our understanding of the proliferation of yeast at low temperatures, especially that of bottom-fermenting brewer's yeast.

  7. Nb effect in the nickel oxide-catalyzed low-temperature oxidative dehydrogenation of ethane

    KAUST Repository

    Zhu, Haibo

    2012-01-01

    A method for the preparation of NiO and Nb-NiO nanocomposites is developed, based on the slow oxidation of a nickel-rich Nb-Ni gel obtained in citric acid. The resulting materials have higher surface areas than those obtained by the classical evaporation method from nickel nitrate and ammonium niobium oxalate. These consist in NiO nanocrystallites (7-13 nm) associated, at Nb contents >3 at.%., with an amorphous thin layer (1-2 nm) of a niobium-rich mixed oxide with a structure similar to that of NiNb 2O 6. Unlike bulk nickel oxides, the activity of these nanooxides for low-temperature ethane oxidative dehydrogenation (ODH) has been related to their redox properties. In addition to limiting the size of NiO crystallites, the presence of the Nb-rich phase also inhibits NiO reducibility. At Nb content >5 at.%, Nb-NiO composites are thus less active for ethane ODH but more selective, indicating that the Nb-rich phase probably covers part of the unselective, non-stoichiometric, active oxygen species of NiO. This geometric effect is supported by high-resolution transmission electron microscopy observations. The close interaction between NiO and the thin Nb-rich mixed oxide layer, combined with possible restructuration of the nanocomposite under ODH conditions, leads to significant catalyst deactivation at high Nb loadings. Hence, the most efficient ODH catalysts obtained by this method are those containing 3-4 at.% Nb, which combine high activity, selectivity, and stability. The impact of the preparation method on the structural and catalytic properties of Nb-NiO nanocomposites suggests that further improvement in NiO-catalyzed ethane ODH can be expected upon optimization of the catalyst. © 2011 Elsevier Inc. All rights reserved.

  8. Modification of Resistance Expression of Phaseolus vulgaris to Meloidogyne incognita by Elevated Soil Temperatures

    National Research Council Canada - National Science Library

    Mullin, B A; Abawi, G S; Pastor-Corrales, M A

    1991-01-01

    The effect of temperature on the reaction of susceptible (Canario Divex) and resistant (A 211) bean pure lines to Meloidogyne incognita was studied with soil temperature tanks housed in a growth chamber at 22 or 24 C...

  9. Creep and Oxidation of Hafnium Diboride Based Ultra High Temperature Ceramics at 1500C

    Science.gov (United States)

    2015-12-01

    their structural integrity and environmental durability must be assured, which requires a thorough understanding and characterization of their creep and oxidation behavior at relevant service temperatures.

  10. Multi-Electrode Resistivity Probe for Investigation of Local Temperature Inside Metal Shell Battery Cells via Resistivity: Experiments and Evaluation of Electrical Resistance Tomography

    Directory of Open Access Journals (Sweden)

    Xiaobin Hong

    2015-01-01

    Full Text Available Direct Current (DC electrical resistivity is a material property that is sensitive to temperature changes. In this paper, the relationship between resistivity and local temperature inside steel shell battery cells (two commercial 10 Ah and 4.5 Ah lithium-ion cells is innovatively studied by Electrical Resistance Tomography (ERT. The Schlumberger configuration in ERT is applied to divide the cell body into several blocks distributed in different levels, where the apparent resistivities are measured by multi-electrode surface probes. The investigated temperature ranges from −20 to 80 °C. Experimental results have shown that the resistivities mainly depend on temperature changes in each block of the two cells used and the function of the resistivity and temperature can be fitted to the ERT-measurement results in the logistical-plot. Subsequently, the dependence of resistivity on the state of charge (SOC is investigated, and the SOC range of 70%–100% has a remarkable impact on the resistivity at low temperatures. The proposed approach under a thermal cool down regime is demonstrated to monitor the local transient temperature.

  11. Next-Generation Electrochemical Energy Materials for Intermediate Temperature Molten Oxide Fuel Cells and Ion Transport Molten Oxide Membranes.

    Science.gov (United States)

    Belousov, Valery V

    2017-02-21

    High temperature electrochemical devices such as solid oxide fuel cells (SOFCs) and oxygen separators based on ceramic materials are used for efficient energy conversion. These devices generally operate in the temperature range of 800-1000 °C. The high operating temperatures lead to accelerated degradation of the SOFC and oxygen separator materials. To solve this problem, the operating temperatures of these electrochemical devices must be lowered. However, lowering the temperature is accompanied by decreasing the ionic conductivity of fuel cell electrolyte and oxygen separator membrane. Therefore, there is a need to search for alternative electrolyte and membrane materials that have high ionic conductivity at lower temperatures. A great many opportunities exist for molten oxides as electrochemical energy materials. Because of their unique electrochemical properties, the molten oxide innovations can offer significant benefits for improving energy efficiency. In particular, the newly developed electrochemical molten oxide materials show high ionic conductivities at intermediate temperatures (600-800 °C) and could be used in molten oxide fuel cells (MOFCs) and molten oxide membranes (MOMs). The molten oxide materials containing both solid grains and liquid channels at the grain boundaries have advantages compared to the ceramic materials. For example, the molten oxide materials are ductile, which solves a problem of thermal incompatibility (difference in coefficient of thermal expansion, CTE). Besides, the outstanding oxygen selectivity of MOM materials allows us to separate ultrahigh purity oxygen from air. For their part, the MOFC electrolytes show the highest ionic conductivity at intermediate temperatures. To evaluate the potential of molten oxide materials for technological applications, the relationship between the microstructure of these materials and their transport and mechanical properties must be revealed. This Account summarizes the latest results on

  12. Chemical resistance of thin film materials based on metal oxides grown by atomic layer deposition

    Energy Technology Data Exchange (ETDEWEB)

    Sammelselg, Väino, E-mail: vaino.sammelselg@ut.ee [Institute of Physics, University of Tartu, Riia 142, 51014 Tartu (Estonia); Institute of Chemistry, University of Tartu, Ravila 14a, 50411 Tartu (Estonia); Netšipailo, Ivan; Aidla, Aleks; Tarre, Aivar; Aarik, Lauri; Asari, Jelena; Ritslaid, Peeter; Aarik, Jaan [Institute of Physics, University of Tartu, Riia 142, 51014 Tartu (Estonia)

    2013-09-02

    Etching rate of technologically important metal oxide thin films in hot sulphuric acid was investigated. The films of Al-, Ti-, Cr-, and Ta-oxides studied were grown by atomic layer deposition (ALD) method on silicon substrates from different precursors in large ranges of growth temperatures (80–900 °C) in order to reveal process parameters that allow deposition of coatings with higher chemical resistance. The results obtained demonstrate that application of processes that yield films with lower concentration of residual impurities as well as crystallization of films in thermal ALD processes leads to significant decrease of etching rate. Crystalline films of materials studied showed etching rates down to values of < 5 pm/s. - Highlights: • Etching of atomic layer deposited thin metal oxide films in hot H{sub 2}SO{sub 4} was studied. • Smallest etching rates of < 5 pm/s for TiO{sub 2}, Al{sub 2}O{sub 3}, and Cr{sub 2}O{sub 3} were reached. • Highest etching rate of 2.8 nm/s for Al{sub 2}O{sub 3} was occurred. • Remarkable differences in etching of non- and crystalline films were observed.

  13. Oxidation performance of high temperature steels and coatings for future supercritical power plants

    Energy Technology Data Exchange (ETDEWEB)

    Auerkari, Pertti; Salonen, Jorma; Toivonen, Aki; Penttilae, Sami [VTT, Espoo (Finland); Haekkilae, Juha [Foster Wheeler Energia, Varkaus (Finland); Aguero, Alina; Gutierrez, Marcos; Muelas, Raul [INTA, Madrid (Spain); Fry, Tony [NPL (United Kingdom)

    2010-07-01

    The operating efficiency of current and future thermal power plants is largely dependent on the applied temperature and pressure, which are in part limited by the internal oxidation resistance of the structural materials in the steam systems. Alternative and reference materials for such systems have been tested within the COST 536 (ACCEPT) project, including bulk reference materials (ferritic P92 and austenitic 316 LN steels) and several types of coatings under supercritical combined (oxygen) water chemistry (150 ppb DO) at 650 C/300 bar. The testing results from a circulating USC autoclave showed that under such conditions the reference bulk steels performed poorly, with extensive oxidation already after relatively short term exposure to the supercritical medium. Better protection was attained by suitable coatings, although there were clear differences in the protective capabilities between different coating types, and some challenges remain in applying (and repairing) coatings for the internal surfaces of welded structures. The materials performance seems to be worse in supercritical than in subcritical conditions, and this appears not to be only due to the effect of temperature. The implications are considered from the point of view of the operating conditions and materials selection for future power plants. (orig.)

  14. Enhanced Oxidation-Resistant Cu@Ni Core-Shell Nanoparticles for Printed Flexible Electrodes.

    Science.gov (United States)

    Kim, Tae Gon; Park, Hye Jin; Woo, Kyoohee; Jeong, Sunho; Choi, Youngmin; Lee, Su Yeon

    2018-01-10

    In this work, the fabrication and application of highly conductive, robust, flexible, and oxidation-resistant Cu-Ni core-shell nanoparticle (NP)-based electrodes have been reported. Cu@Ni core-shell NPs with a tunable Ni shell thickness were synthesized by varying the Cu/Ni molar ratios in the precursor solution. Through continuous spray coating and flash photonic sintering without an inert atmosphere, large-area Cu@Ni NP-based conductors were fabricated on various polymer substrates. These NP-based electrodes demonstrate a low sheet resistance of 1.3 Ω sq-1 under an optical energy dose of 1.5 J cm-2. In addition, they exhibit highly stable sheet resistances (ΔR/R0 < 1) even after 30 days of aging at 85 °C and 85% relative humidity. Further, a flexible heater fabricated from the Cu@Ni film is demonstrated, which shows uniform heat distribution and stable temperature compared to those of a pure Cu film.

  15. Electrochemical investigation of mixed metal oxide nanocomposite electrode for low temperature solid oxide fuel cell

    Science.gov (United States)

    Abbas, Ghazanfar; Raza, Rizwan; Ashfaq Ahmad, M.; Ajmal Khan, M.; Jafar Hussain, M.; Ahmad, Mukhtar; Aziz, Hammad; Ahmad, Imran; Batool, Rida; Altaf, Faizah; Zhu, Bin

    2017-10-01

    Zinc-based nanostructured nickel (Ni) free metal oxide electrode material Zn0.60/Cu0.20Mn0.20 oxide (CMZO) was synthesized by solid state reaction and investigated for low temperature solid oxide fuel cell (LTSOFC) applications. The crystal structure and surface morphology of the synthesized electrode material were examined by XRD and SEM techniques respectively. The particle size of ZnO phase estimated by Scherer’s equation was 31.50 nm. The maximum electrical conductivity was found to be 12.567 S/cm and 5.846 S/cm in hydrogen and air atmosphere, respectively at 600∘C. The activation energy of the CMZO material was also calculated from the DC conductivity data using Arrhenius plots and it was found to be 0.060 and 0.075 eV in hydrogen and air atmosphere, respectively. The CMZO electrode-based fuel cell was tested using carbonated samarium doped ceria composite (NSDC) electrolyte. The three layers 13 mm in diameter and 1 mm thickness of the symmetric fuel cell were fabricated by dry pressing. The maximum power density of 728.86 mW/cm2 was measured at 550∘C.

  16. Temperature Programmed Reduction/Oxidation (TPR/TPO) Methods

    Science.gov (United States)

    Gervasini, Antonella

    The redox properties of the metal oxides impart them peculiar catalytic activity which is exploited in reactions of oxidation and reduction of high applicative importance. It is possible to measure the extent of oxidation/reduction of given metal oxide by thermal methods which are become very popular: TPR and TPO analyses. By successive experiments of reduction and oxidation (TPR-TPO cycles) it is possible to control the reversible redox ability of a given oxide in view of its use as catalyst. The two methods are here presented with explanation on some possibility of exploitation of kinetic study to derive quantitative information on the reduction/oxidation of the oxide. Examples of selected metal oxides with well-established redox properties which have been used in catalytic processes are shown.

  17. Characterization of the wear resistant aluminum oxide - 40% titaniumdioxide coating

    Directory of Open Access Journals (Sweden)

    Mihailo R. Mrdak

    2014-02-01

    Full Text Available Plasma spray coatings play an important role in the design of surface properties of engineering components in order to increase their durability and performance under different operating conditions. Coatings are the most often used for wear resistance. This paper presents the microstructure and mechanical properties Al2O3_­40wt.%TiO2 coating resistant to dry friction slide, grain abrasion and erosion of particles at operating temperatures up to 540°C. In order to obtain the optimal characteristics of coating was performed  optimization  of deposition parameters. The powder Al2O3­40wt.%TiO2 is deposited atmospheric plasma spraying (APS process with a plasma current of 700, 800 and 900A. Evaluate the quality of the coating Al2O3­40wt.%TiO2 were made on the basis of their hardness, tensile bond strength and microstructure. The best performance showed the deposited layers with 900A. The morphology of the powder particles Al2O3­40wt.%TiO2 was examined with SEM (Scanning Electron Microscope. Microstructure of the coatings was examined by light microscopy. Analysis of the deposited layers was performed in accordance with standard Pratt & Whitney. Evaluation of mechanical properties of the layers was done by examining HV0.3 microhardness and tensile strength of the tensile testing. Studies have shown that plasma currents significantly affects the mechanical properties and microstructure of coatings which are of crucial importance for the protection for components subjected to wear       

  18. Effect of Post-annealing Processes on Filamentary-Based Resistive Switching Mechanism of Chromium Oxide Thin Films

    Science.gov (United States)

    Pham, Ngoc Kim; Ta, Kieu Hanh Thi; Tran, Vinh Cao; Le, Van Hieu; Le Nguyen, Bao Thu; Ju, Heong Kyu; Seetawan, Tosawat; Phan, Bach Thang

    2017-06-01

    The interrelation between microstructure of chromium oxide films (CrOx) and formation of silver (Ag) filament in Ag/CrOx/Pt devices has been investigated at various annealing temperatures. It is revealed that Cr2O3 phase is dominant at high annealing temperatures and different microstructures of the CrOx films exhibit different resistance switching characteristics. As-deposited CrOx films with amorphous structure show highly reliable and reproducible resistance switching due to an easy formation of thin Ag filaments. 300°C-annealed CrOx films with denser structure exhibit a fluctuating switching characteristics, relating to negative differential resistance (NDR) effect, in the first several tens of switching cycles, followed by a stable switching characteristics. On the contrary, the resistance switching is not observed in 500°C-annealed CrOx films due to presence of voids or pinholes created at high annealing temperature. The roles of NDR effect and voids/pinholes on resistance switching characteristics of CrOx thin films are also discussed.

  19. Oxidation of X20 in Water Vapour: The Effect of Temperature and Oxygen Partial Pressure

    DEFF Research Database (Denmark)

    Hansson, Anette Nørgaard; Montgomery, Melanie; Somers, Marcel A. J.

    2009-01-01

    The oxidation behaviour of X20 in various mixtures of water, oxygen and hydrogen was investigated at temperatures between 500 C and 700 C (time: 336 h). The samples were characterised using reflected light microscopy and scanning electron microscopy equipped with energy dispersive spectroscopy....... Double-layered oxides developed during oxidation under all conditions. The morphology of the oxide layers was strongly influenced by temperature, whereas the influence of the oxidising environment appeared to be less pronounced, as long as it contained water vapour. The inner layer consisted of converted...... M23C6 embedded in Fe–Cr spinel after oxidation at 500 and 600 C, while alternating layers of Cr-rich and Cr-poor oxide were observed after oxidation at 700 C. An internal oxidation zone developed during oxidation at 500 and 600 C, with its depth influenced by the oxidising environments. The results...

  20. Femtosecond laser damage resistance of oxide and mixture oxide optical coatings.

    Science.gov (United States)

    Mangote, Benoit; Gallais, Laurent; Commandré, Mireille; Mende, Mathias; Jensen, Lars; Ehlers, Henrik; Jupé, Marco; Ristau, Detlev; Melninkaitis, Andrius; Mirauskas, Julius; Sirutkaitis, Valdas; Kičas, Simonas; Tolenis, Tomas; Drazdys, Ramutis

    2012-05-01

    We report on the laser damage resistance of ion beam-sputtered oxide materials (Al2O3, Nb2O5, HfO2, SiO2, Ta2O5, ZrO2) and mixtures of Al2O3-SiO2, Nb2O5-SiO2, HfO2-SiO2, Ta2O5-SiO2, and ZrO2-SiO2, irradiated by single 500 fs pulses at 1030 nm. Laser-induced damage threshold (LIDT), refractive index, and bandgaps of the single-layer coatings are measured. For pure oxide materials a linear evolution of the LIDT with bandgap is observed. The results are in accordance with our simulations based on photo-ionization and avalanche-ionization. In the case of mixtures, however, deviations from the previous behaviors are evidenced. The evolution of the LIDT as a function of the refractive index is analyzed, and an empirical description of the relation between refractive index and LIDT is proposed.

  1. In situ synthesis of manganese oxides on polyester fiber for formaldehyde decomposition at room temperature

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jinlong [State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 100084 (China); Collaborative Innovation Center for Regional Environmental Quality (China); Yunus, Rizwangul [State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 100084 (China); Xinjiang Zhongtai Chemical Company, Xinjiang 831511 (China); Li, Jinge; Li, Peilin [State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 100084 (China); Zhang, Pengyi, E-mail: zpy@tsinghua.edu.cn [State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 100084 (China); Collaborative Innovation Center for Regional Environmental Quality (China); Kim, Jeonghyun [State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 100084 (China); Collaborative Innovation Center for Regional Environmental Quality (China)

    2015-12-01

    Graphical abstract: - Highlights: • The MnO{sub x} particles assembled with nanosheets were uniformly coated on PET fibers. • The growth process of MnO{sub x} layer on PET is clearly clarified. • MnO{sub x}/PET showed good activity for HCHO decomposition at room temperature. • MnO{sub x}/PET material is promising for indoor air purification due to its light, flexible and low air-resistant properties. - Abstract: Removal of low-level formaldehyde (HCHO) is of great interest for indoor air quality improvement. Supported materials especially those with low air pressure drop are of necessity for air purification. Manganese oxides (MnO{sub x}) was in situ deposited on the surface of fibers of a non-woven fabric made of polyethylene terephthalate (PET). As-synthesized MnO{sub x}/PET were characterized by SEM, XRD, TEM, ATR-FTIR and XPS analysis. The growth of MnO{sub x} layer on PET is thought to start with partial hydrolysis of PET, followed by surface oxidation by KMnO{sub 4} and then surface-deposition of MnO{sub x} particles from the bulk phase. The MnO{sub x} particles assembled with nanosheets were uniformly coated on the PET fibers. MnO{sub x}/PET showed good activity for HCHO decomposition at room temperature which followed the Mars–van Krevelen mechanism. The removal of HCHO was kept over 94% after 10 h continuous reaction under the conditions of inlet HCHO concentration ∼0.6 mg/m{sup 3}, space velocity ∼17,000 h{sup −1} and relative humidity∼50%. This research provides a facile method to deposit active MnO{sub x} onto polymers with low air resistance, and composite MnO{sub x}/PET material is promising for indoor air purification.

  2. Efficient room temperature oxidation of cyclohexane over highly active hetero-mixed WO3/V2O5 oxide catalyst

    CSIR Research Space (South Africa)

    Makgwane, PR

    2014-09-01

    Full Text Available An efficient room temperature catalyzed oxidation of cyclohexane to cyclohexanone (K) and cyclohexanol (A) was achieved over hetero-mixed tungsten–vanadia (WO(sub3)/V(sub2)O(sub5)) using H(sub2)O(sub2) oxidant. WO(sub3)/V(sub2)O(sub5) exhibited high...

  3. Effects of Temperature on Resistance in Phaseolus vulgaris Genotypes and on Development of Meloidogyne Species

    OpenAIRE

    Sydenham, G. M.; McSorley, R.; Dunn, R. A.

    1997-01-01

    Phaseolus vulgaris lines with heat-stable resistance to Meloidogyne spp. may be needed to manage root-knot nematodes in tropical regions. Resistance expression before and during the process of nematode penetration and development in resistant genotypes were studied at pre- and postinoculation temperatures of 24 °C and 24 °C, 24 °C and 28 °C, 28 °C and 24 °C, and 28 °C and 28 °C. Resistance was effective at all temperature regimes examined, with fewer nematodes in roots of a resistant line com...

  4. Effects of pressure and temperature on thermal contact resistance between different materials

    Directory of Open Access Journals (Sweden)

    Zhao Zhe

    2015-01-01

    Full Text Available To explore whether pressure and temperature can affect thermal contact resistance, we have proposed a new experimental approach for measurement of the thermal contact resistance. Taking the thermal contact resistance between phenolic resin and carbon-carbon composites, cuprum, and aluminum as the examples, the influence of the thermal contact resistance between specimens under pressure is tested by experiment. Two groups of experiments are performed and then an analysis on influencing factors of the thermal contact resistance is presented in this paper. The experimental results reveal that the thermal contact resistance depends not only on the thermal conductivity coefficient of materials, but on the interfacial temperature and pressure. Furthermore, the thermal contact resistance between cuprum and aluminum is more sensitive to pressure and temperature than that between phenolic resin and carbon-carbon composites.

  5. Reaction mechanism and kinetics of sulfide copper concentrate oxidation at elevated temperatures

    Directory of Open Access Journals (Sweden)

    Aleksandra Mitovski

    2017-09-01

    Full Text Available Sulfide copper concentrate from domestic ore deposit (Bor, Serbia was subjected to oxidation in the air atmosphere due to a better understanding of reaction mechanism and oxidation of various sulfides present in the copper concentrate at elevated temperatures. Results of the initial sample characterization showed that concentrate is chalcopyrite–enargite-tennantite type, with an increased arsenic content. Characterization of the oxidation products showed the presence of sulfates, oxysulfates, and oxides. Based on predominance area diagrams for Me-S-O systems (Me = Cu, Fe, As combined with thermal analysis results, the reaction mechanism of the oxidation process was proposed. The reactions which occur in the temperature range 25 – 1000 °C indicate that sulfides are unstable in the oxidative conditions. Sulfides from the initial sample decomposed into binary copper and iron sulfides and volatile arsenic oxides at lower temperatures. Further heating led to oxidation of sulfides into iron oxides and copper sulfates and oxysulfates. At higher temperatures sulfates and oxysulfates decomposed into oxides. Kinetic analysis of the oxidation process was done using Ozawa’s method in the non-isothermal conditions. The values for activation energies showed that the reactions are chemically controlled and the temperature is the most influential parameter on the reaction rates.

  6. A study on high temperature oxidation behavior of double glow plasma surface metallurgy Fe-Al-Cr alloyed layer on Q235 steel

    Science.gov (United States)

    Luo, Xi-Xi; Yao, Zheng-Jun; Zhang, Ping-Ze; Miao, Qiang; Liang, Wen-Ping; Wei, Dong-Bo; Chen, Yu

    2014-06-01

    The high-temperature oxidation behavior of Q235 steel coated with Fe-Al-Cr by using double glow plasma surface metallurgy method was studied in air at different temperatures of 500, 600 and 700 °C, respectively. The Q235 and the 304 stainless steels were produced as the control samples. Electron microscopy, energy dispersive spectroscopy and X-ray diffractometry were carried out to investigate the surface morphologies, microstructures and phases of alloyed layer before and after oxidation. It showed that the structure of the Fe-Al-Cr alloyed layer was compact without any microstructure defects. This alloyed layer connected with the substrate metal by metallurgical bonding. At the temperatures of 500 and 600 °C, the high temperature oxidation resistance of the Fe-Al-Cr alloyed layer was similar to that of the 304 steel, but 2-3 times higher than that of the Q235 steel. While at 700 °C, the Fe-Al-Cr alloyed layer exhibited much better oxidation resistance than that of the 304 steel (2.5 times) and the Q235 steel (5.5 times). And this was because the special Al distribution (approximate Gaussian distribution) in the Fe-Al-Cr alloyed layer, which displayed the self-healing ability for the oxidation film on the surface of the Fe-Al-Cr alloyed layer in the high temperature oxidation conditions.

  7. Increase in expression levels and resistance to sulfhydryl oxidation of peroxiredoxin isoforms in amyloid beta-resistant nerve cells.

    Science.gov (United States)

    Cumming, Robert C; Dargusch, Richard; Fischer, Wolfgang H; Schubert, David

    2007-10-19

    Peroxiredoxins (Prxs) are a ubiquitously expressed family of thiol peroxidases that reduce hydrogen peroxide, peroxynitrite, and hydroperoxides using a highly conserved cysteine. There is substantial evidence that oxidative stress elicited by amyloid beta (Abeta) accumulation is a causative factor in the pathogenesis of Alzheimer disease (AD). Here we show that Abeta-resistant PC12 cell lines exhibit increased expression of multiple Prx isoforms with reduced cysteine oxidation. Abeta-resistant PC12 cells also display higher levels of thioredoxin and thioredoxin reductase, two enzymes critical for maintaining Prx activity. PC12 cells and rat primary hippocampal neurons transfected with wild type Prx1 exhibit increased Abeta resistance, whereas mutant Prx1, lacking a catalytic cysteine, confers no protection. Using an antibody that specifically recognizes sulfinylated and sulfonylated Prxs, it is demonstrated that primary rat cortical nerve cells exposed to Abeta display a time-dependent increase in cysteine oxidation of the catalytic site of Prxs that can be blocked by the addition of the thiol-antioxidant N-acetylcysteine. In support of previous findings, expression of Prx1 is higher in post-mortem human AD cortex tissues than in age-matched controls. In addition, two-dimensional gel electrophoresis and mass spectrometry analysis revealed that Prx2 exists in a more oxidized state in AD brains than in control brains. These findings suggest that increased Prx expression and resistance to sulfhydryl oxidation in Abeta-resistant nerve cells is a compensatory response to the oxidative stress initiated by chronic pro-oxidant Abeta exposure.

  8. Modification of Resistance Expression of Phaseolus vulgaris to Meloidogyne incognita by Elevated Soil Temperatures.

    Science.gov (United States)

    Mullin, B A; Abawi, G S; Pastor-Corrales, M A

    1991-04-01

    The effect of temperature on the reaction of susceptible (Canario Divex) and resistant (A 211) bean pure lines to Meloidogyne incognita was studied with soil temperature tanks housed in a growth chamber at 22 or 24 C. Soil temperature remained constant at 16, 22, 24, 26, 30, or 32 C in several trials. Bean line A 211 was resistant at 16 and 22 C but was susceptible at 24 C and above. Resistance to root-knot nematode reproduction was affected by a lower temperature (24 C) than was resistance to root galling (26 C) in A 211. Incubation of A 211 at 30 C for 3 and 16 days after inoculation with M. incognita resulted in a significant increase in nematode reproduction and root galling, respectively. The resistant reactions of A 211 to nematode reproduction and root galling were retained when inoculated plants were incubated at 21 C for a minimum of 16 and 23 days, respectively, prior to high temperature treatment.

  9. Disordered Manganese Oxide Nano-powder Prepared by Low-temperature Synthesis Followed by Acid Treatment

    OpenAIRE

    Koyanaka, Hideki; Hata, Toshihiro; IMAMURA, Yuji

    2005-01-01

    Disordered manganese oxide, prepared by low-temperature synthesis followed by acid treatment is introduced. Aggregated nano-powder of disordered manganese oxide was obtained in this method. The disordered manganese oxide is suitable starting material for the preparation of efficient adsorbents for the removal of harmful metals from the environment.

  10. Low Environmental Temperature Influences the Fatigue Resistance of Nickel-titanium Files.

    Science.gov (United States)

    Shen, Ya; Huang, Xiangya; Wang, Zhejun; Wei, Xi; Haapasalo, Markus

    2018-01-03

    The purpose of this study was to evaluate the effect of different temperatures (0°C, 10°C, 22°C, 37°C, and 60°C) on the cyclic fatigue life of nickel-titanium (NiTi) files using a new fatigue test model in zirconium oxide. Three superelastic NiTi files (EndoSequence [Brasseler USA, Savannah, GA], ProFile [Dentsply Tulsa Dental Specialties, Tulsa, OK], and K3 [SybronEndo, Orange, CA]), and 3 heat-treated (K3XF [SybronEndo], Vortex [Dentsply Tulsa Dental Specialties], and HyFlex CM [Coltene-Whaledent, Allstetten, Switzerland]) NiTi files, all size 25/.04, were subjected to cyclic fatigue tests inside a novel, artificial ceramic canal with a curvature of 60° and a 5-mm radius. The model was immersed in water at 5 different preset temperatures. The number of cycles to failure (NCF) was recorded, and the fracture surface of the fragments was examined by a scanning electron microscope. The data were analyzed using 2-way analysis of variance with the significance level at 0.05. When the temperature was reduced from 60°C to 0°C, the NCF significantly increased from over 2 to 10 times for the NiTi file groups (P HyFlex CM at 0°C and 22°C. There was little difference in the fractographic appearance among different temperatures, except that the fraction area occupied by the dimple region of some instruments at 0°C was slightly smaller than at 60°C. Cooling down to low temperatures may be an interesting strategy to improve the fatigue resistance of rotary NiTi files. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  11. Effect of Temperature on Expression of Resistance to Meloidogyne spp. In Common Bean (Phaseolus vulgaris)

    OpenAIRE

    Omwega, C. O.; Thomason, I. J.; ROBERTS, P. A.

    1990-01-01

    The effect of soil temperature on the expression of resistance in several common bean lines carrying resistance to root-knot nematodes (Meloidogyne spp.) was studied under controlled temperatures in temperature tank and growth chamber conditions. Resistance to M. javanica and M. incognita race 1 in bean lines A315, A328, A445, G1805, and G2618 was stable at 24-30 C. However, there was a significant increase in reproduction of M. javanica on A315, A328, and A445 when temperature was increased ...

  12. Ca-Sr-Ga-Nb mixed oxide system for high temperature superconductor substrate applications

    Energy Technology Data Exchange (ETDEWEB)

    Erdei, S.; Cross, L.E.; Ainger, F.W.; Bhalla, A. (Materials Research Lab., The Pennsylvania State Univ., Univ. Park, Pennsylvania (United States))

    1994-05-01

    Twin-free crystals with relatively low melting temperatures are desirable as substrates for high temperature superconductor (HTSC) oxide substrate materials. In the selection of new oxide substrate compositions, special requirements (e.g. suitable dielectric properties for microwave application and perovskite structure with good lattice matching with YBa[sub 2]Cu[sub 3]O[sub 7-[delta

  13. Low Temperature Synthesis and Properties of Gadolinium-Doped Cerium Oxide Nanoparticles

    DEFF Research Database (Denmark)

    Machado, M. F. S.; Moraes, L. P. R.; Monteiro, N. K.

    2017-01-01

    Gadolinium-doped cerium oxide (GDC) is an attractive ceramic material for solid oxide fuel cells (SOFCs) both as the electrolyte and in composite electrodes operating at low and intermediate temperatures. GDC exhibits high oxygen ion conductivity at a wide range of temperatures and displays a hig...

  14. Low-temperature aluminum reduction of graphene oxide, electrical properties, surface wettability, and energy storage applications.

    Science.gov (United States)

    Wan, Dongyun; Yang, Chongyin; Lin, Tianquan; Tang, Yufeng; Zhou, Mi; Zhong, Yajuan; Huang, Fuqiang; Lin, Jianhua

    2012-10-23

    Low-temperature aluminum (Al) reduction is first introduced to reduce graphene oxide (GO) at 100-200 °C in a two-zone furnace. The melted Al metal exhibits an excellent deoxygen ability to produce well-crystallized reduced graphene oxide (RGO) papers with a low O/C ratio of 0.058 (Al-RGO), compared with 0.201 in the thermally reduced one (T-RGO). The Al-RGO papers possess outstanding mechanical flexibility and extremely high electrical conductivities (sheet resistance R(s) ~ 1.75 Ω/sq), compared with 20.12 Ω/sq of T-RGO. More interestingly, very nice hydrophobic nature (90.5°) was observed, significantly superior to the reported chemically or thermally reduced papers. These enhanced properties are attributed to the low oxygen content in the RGO papers. During the aluminum reduction, highly active H atoms from H(2)O reacted with melted Al promise an efficient oxygen removal. This method was also applicable to reduce graphene oxide foams, which were used in the GO/SA (stearic acid) composite as a highly thermally conductive reservoir to hold the phase change material for thermal energy storage. The Al-reduced RGO/SnS(2) composites were further used in an anode material of lithium ion batteries possessing a higher specific capacity. Overall, low-temperature Al reduction is an effective method to prepare highly conductive RGO papers and related composites for flexible energy conversion and storage device applications.

  15. Platinum/tin oxide/carbon cathode catalyst for high temperature PEM fuel cell

    Science.gov (United States)

    Parrondo, Javier; Mijangos, Federico; Rambabu, B.

    The performance of high temperature polymer electrolyte fuel cell (HT-PEMFC) using platinum supported over tin oxide and Vulcan carbon (Pt/SnOx/C) as cathode catalyst was evaluated at 160-200 °C and compared with Pt/C. This paper reports first time the Pt/SnOx/C preparation, fuel cell performance, and durability test up to 200 h. Pt/SnOx/C of varying SnO compositions were characterized using XRD, SEM, TEM, EDX and EIS. The face-centered cubic structure of nanosized Pt becomes evident from XRD data. TEM and EDX measurements established that the average size of the Pt nanoparticles were ∼6 nm. Low ionic resistances were derived from EIS, which ranged from 0.5 to 5 Ω-cm 2 for cathode and 0.05 to 0.1 Ω-cm 2 for phosphoric acid, doped PBI membrane. The addition of the SnOx to Pt/C significantly promoted the catalytic activity for the oxygen reduction reaction (ORR). The 7 wt.% SnO in Pt/SnO 2/C catalyst showed the highest electro-oxidation activity for ORR. High temperature PEMFC measurements performed at 180 °C under dry gases (H 2 and O 2) showed 0.58 V at a current density of 200 mA cm -2, while only 0.40 V was obtained in the case of Pt/C catalyst. When the catalyst contained higher concentrations of tin oxide, the performance decreased as a result of mass transport limitations within the electrode. Durability tests showed that Pt/SnOx/C catalysts prepared in this work were stable under fuel cell working conditions, during 200 h at 180 °C demonstrate as potential cathode catalyst for HT-PEMFCs.

  16. A new high temperature resistant glass–ceramic coating for gas ...

    Indian Academy of Sciences (India)

    based on MgO–Al2O3–TiO2 and ZnO–Al2O3–SiO2 based glass systems) for gas turbine engine components has been developed. Thermal shock resistance, adherence at 90°-bend test and static oxidation resistance at the required working ...

  17. The oxidation of aluminum at high temperature studied by Thermogravimetric Analysis and Differential Scanning Calorimetry.

    Energy Technology Data Exchange (ETDEWEB)

    Coker, Eric Nicholas

    2013-10-01

    The oxidation in air of high-purity Al foil was studied as a function of temperature using Thermogravimetric Analysis with Differential Scanning Calorimetry (TGA/DSC). The rate and/or extent of oxidation was found to be a non-linear function of the temperature. Between 650 and 750 ÀC very little oxidation took place; at 850 ÀC oxidation occurred after an induction period, while at 950 ÀC oxidation occurred without an induction period. At oxidation temperatures between 1050 and 1150 ÀC rapid passivation of the surface of the aluminum foil occurred, while at 1250 ÀC and above, an initial rapid mass increase was observed, followed by a more gradual increase in mass. The initial rapid increase was accompanied by a significant exotherm. Cross-sections of oxidized specimens were characterized by scanning electron microscopy (SEM); the observed alumina skin thicknesses correlated qualitatively with the observed mass increases.

  18. Effects of Temperature on Resistance in Phaseolus vulgaris Genotypes and on Development of Meloidogyne Species.

    Science.gov (United States)

    Sydenham, G M; McSorley, R; Dunn, R A

    1997-03-01

    Phaseolus vulgaris lines with heat-stable resistance to Meloidogyne spp. may be needed to manage root-knot nematodes in tropical regions. Resistance expression before and during the process of nematode penetration and development in resistant genotypes were studied at pre- and postinoculation temperatures of 24 degrees C and 24 degrees C, 24 degrees C and 28 degrees C, 28 degrees C and 24 degrees C, and 28 degrees C and 28 degrees C. Resistance was effective at all temperature regimes examined, with fewer nematodes in roots of a resistant line compared with a susceptible line. Preinoculation temperature did not modify resistance expression to later infections by root-knot nematodes. However, postinoculation temperatures affected development of Meloidogyne spp. in both the resistant and susceptible bean lines tested. The more rapid development of nematodes to adults at the higher postinoculation temperature of 28 degrees C in both bean lines suggests direct temperature effects on nematode development instead of on resistance expression of either of two gene systems. Also, resistance was stable at 30 degrees C and 32 degrees C.

  19. Effect of pre-oxidation on high temperature sulfidation behavior of FeCr and FeCrAl alloys

    Directory of Open Access Journals (Sweden)

    Pillis Marina Fuser

    2004-01-01

    Full Text Available High temperature corrosion of structural alloys in sulfur bearing environments is many orders of magnitude higher than in oxidizing environments. Efforts to increase sulfidation resistance of these alloys include addition of alloying elements. Aluminum additions to iron-chromium alloys bring about increase in sulfidation resistance. This paper reports the effect of pre-oxidation on the sulfidation behavior of Fe-20Cr and Fe-20Cr-5Al alloys in H2-2% H2S environment at 800 °C. The surfaces of sulfidized specimens were also examined. Pre-oxidation of the two alloys results in an incubation period during subsequent sulfidation. After this incubation period, the Fe-20Cr alloy showed sulfidation behavior similar to that when the alloy was not pre-oxidized. The incubation period during sulfidation of the Fe-20Cr-5Al alloy was significantly longer, over 45 h, compared to 2 h for the Al free alloy. Based on the microscopic and gravimetric data a mechanism for sulfidation of these alloys with pre-oxidation has been proposed.

  20. Signatures of Conformational Stability and Oxidation Resistance in Proteomes of Pathogenic Bacteria

    Directory of Open Access Journals (Sweden)

    Anita Vidovic

    2014-06-01

    Full Text Available Protein oxidation is known to compromise vital cellular functions. Therefore, invading pathogenic bacteria must resist damage inflicted by host defenses via reactive oxygen species. Using comparative genomics and experimental approaches, we provide multiple lines of evidence that proteins from pathogenic bacteria have acquired resistance to oxidative stress by an increased conformational stability. Representative pathogens exhibited higher survival upon HSP90 inhibition and a less-oxidation-prone proteome. A proteome signature of the 46 pathogenic bacteria encompasses 14 physicochemical features related to increasing protein conformational stability. By purifying ten representative proteins, we demonstrate in vitro that proteins with a pathogen-like signature are more resistant to oxidative stress as a consequence of their increased conformational stability. A compositional signature of the pathogens’ proteomes allowed the design of protein fragments more resilient to both unfolding and carbonylation, validating the relationship between conformational stability and oxidability with implications for synthetic biology and antimicrobial strategies.

  1. Wafer scale integration of reduced graphene oxide by novel laser processing at room temperature in air

    Science.gov (United States)

    Bhaumik, Anagh; Narayan, Jagdish

    2016-09-01

    Physical properties of reduced graphene oxide (rGO) strongly depend on the ratio of sp2 to sp3 hybridized carbon atoms, the presence of different functional groups, and the characteristics of the substrates. This research for the very first time illustrates successful wafer scale integration of 2D rGO with Cu/TiN/Si, employing pulsed laser deposition followed by laser annealing of carbon-doped copper layers using nanosecond excimer lasers. The XRD, SEM, and Raman spectroscopy measurements indicate the presence of large area rGO onto Si having Raman active vibrational modes: D, G, and 2D. A high resolution SEM depicts the morphology and formation of rGO from zone-refined carbon formed after nanosecond laser annealing. Temperature-dependent resistance data of rGO thin films follow the Efros-Shklovskii variable range hopping (VRH) model in the low-temperature region and Arrhenius conduction in the high-temperature regime. The photoluminescence spectra also reveal a less intense and broader blue fluorescence spectra, indicating the presence of miniature sized sp2 domains in the near vicinity of π* electronic states which favor the VRH transport phenomena. This wafer scale integration of rGO with Si employing a laser annealing technique will be useful for multifunctional integrated electronic devices and will open a new frontier for further extensive research in these functionalized 2D materials.

  2. Effect of ultraviolet illumination on metal oxide resistive memory

    KAUST Repository

    Duran Retamal, Jose Ramon

    2014-12-22

    We investigate the photoelectrical and resistive switching properties of Pt/ZnO/Pt capacitor operated in unipolar mode under ultraviolet (UV) illumination. The oxygen photodesorption under UV illumination explains the photoconduction observed in initial and high resistance states. Meanwhile, oxygen readsorption at surface-related defects justifies the different photoresponses dynamics in both states. Finally, UV illumination significantly reduces the variations of resistance in high resistance state, set voltage and reset voltage by 58%, 33%, and 25%, respectively, stabilizing Pt/ZnO/Pt capacitor. Our findings in improved switching uniformity via UV light give physical insight into designing resistive memory devices.

  3. Decreased Skin-Mediated Detoxification Contributes to Oxidative Stress and Insulin Resistance

    OpenAIRE

    Liu, Xing-Xing; Sun, Chang-Bin; Yang, Ting-Tong; Li, Da; Li, Chun-Yan; Tian, Yan-Jie; Guo, Ming; Cao, Yu; Zhou, Shi-Sheng

    2012-01-01

    The skin, the body's largest organ, plays an important role in the biotransformation/detoxification and elimination of xenobiotics and endogenous toxic substances, but its role in oxidative stress and insulin resistance is unclear. We investigated the relationship between skin detoxification and oxidative stress/insulin resistance by examining burn-induced changes in nicotinamide degradation. Rats were divided into four groups: sham-operated, sham-nicotinamide, burn, and burn-nicotinamide. Ra...

  4. Heat resistant nickel base alloy excellent in workability and high temperature strength properties

    Energy Technology Data Exchange (ETDEWEB)

    Susukida, H.; Itoh, H.; Kawai, H.; Kojima, T.; Sahira, K.; Takeiri, T.; Tsuji, I.; Yuge, M.

    1984-10-02

    A heat resistant nickel base alloy which is excellent in not only hot and cold workability but also high temperature strength properties and which also possesses satisfactory oxidation resistance. The nickel base alloy consists essentially of 0.001-0.15 percent carbon, 0.0005-0.05 percent calcium, 20.0-126.0 percent chromium, 4.7-9.4 percent cobalt, 5.0-16.0 percent molybdenum, 0.5-4.0 percent tungsten, with the total of molybdenum plus tungsten being from 9.0 to 16.5 percent, and the balance nickel and inevitable impurities. The alloy may further contain one selected from the group consisting of (1) 0.3-1.5 percent aluminum and 0.1-1.0 percent titanium, (2) 0.001-0.30 percent at least one of yttrium and rare earth elements, and (3) 0.001-1.0 percent at least one of niobium, vanadium and tantalum, whereby the aforementioned characteristics are further enhanced.

  5. Room temperature oxidation kinetics of Si nanoparticles in air, determined by x-ray photoelectron spectroscopy

    Science.gov (United States)

    Yang, D.-Q.; Gillet, Jean-Numa; Meunier, M.; Sacher, E.

    2005-01-01

    The air oxidation kinetics of low coverages of ˜5nm Si nanoparticles, deposited by pulsed excimer laser ablation (KrF, 248 nm) in He, have been characterized by x-ray photoelectron spectroscopy. A simple model, based on the evolution of the Si 2p spectral components during oxidation, has been developed to determine the nanoparticle oxide thickness. It is found that the short-term oxide thickness is greater, and the long-term room-temperature air oxidization rate of these nanoparticles is less, than those reported for bulk a-Si and c-Si. The results are also consistent with an earlier transmission electron microscope observation of the oxidation of larger Si particles at higher temperatures. The greater short-term oxide thickness may be attributed to surface defects on the prepared Si nanoparticles, and lower long-term oxidation rate is due to the nonlinear decrease of oxygen diffusion in spherical systems.

  6. Online junction temperature measurement via internal gate resistance during turn-on

    DEFF Research Database (Denmark)

    Baker, Nick; Munk-Nielsen, Stig; Liserre, Marco

    2014-01-01

    A new method for junction temperature measurement of power semiconductor switches is presented. The measurement exploits the temperature dependent resistance of the temperature sensitive electrical parameter (TSEP): the internal gate resistance. This dependence can be observed during the normal...... TSEP based measurement methods, primarily being: an absence of any dependence on operating conditions such as load current, and the potential to achieve higher sensitivity (20mV/C or more) than alternative TSEPs....

  7. Low-temperature solution-processed metal oxide buffer layers fulfilling large area production requirements

    Science.gov (United States)

    Stubhan, T.; Litzov, I.; Li, Ning; Wang, H. Q.; Krantz, J.; Machui, F.; Steidl, M.; Oh, H.; Matt, G. J.; Brabec, C. J.

    2012-09-01

    This paper is a review of our previous work on the field of low temperature, solution processed metal oxide buffer layers published in various journals. Our work focuses on zinc oxide (ZnO) and aluminum-doped zinc oxide (AZO) as n-type and molybdenum oxide (MoO3) as p-type solution processed buffer layer. In addition to that, we investigate the surface modification of AZO using phosphonic acid-anchored aliphatic and fullerene self assembled monolayers (SAMs).

  8. Electrode Design for Low Temperature Direct-Hydrocarbon Solid Oxide Fuel Cells

    Science.gov (United States)

    Chen, Fanglin (Inventor); Zhao, Fei (Inventor); Liu, Qiang (Inventor)

    2015-01-01

    In certain embodiments of the present disclosure, a solid oxide fuel cell is described. The solid oxide fuel cell includes a hierarchically porous cathode support having an impregnated cobaltite cathode deposited thereon, an electrolyte, and an anode support. The anode support includes hydrocarbon oxidation catalyst deposited thereon, wherein the cathode support, electrolyte, and anode support are joined together and wherein the solid oxide fuel cell operates a temperature of 600.degree. C. or less.

  9. Sulfur and Water Resistance of Mn-Based Catalysts for Low-Temperature Selective Catalytic Reduction of NOx: A Review

    Directory of Open Access Journals (Sweden)

    Chen Gao

    2018-01-01

    Full Text Available Selective catalytic reduction (SCR with NH3 is the most efficient and economic flue gas denitrification technology developed to date. Due to its high low-temperature catalytic activity, Mn-based catalysts present a great prospect for application in SCR de-NOx at low temperatures. However, overcoming the poor resistance of Mn-based catalysts to H2O and SO2 poison is still a challenge. This paper reviews the recent progress on the H2O and SO2 resistance of Mn-based catalysts for the low-temperature SCR of NOx. Firstly, the poison mechanisms of H2O and SO2 are introduced in detail, respectively. Secondly, Mn-based catalysts are divided into three categories—single MnOx catalysts, Mn-based multi-metal oxide catalysts, and Mn-based supported catalysts—to review the research progress of Mn-based catalysts for H2O and SO2 resistance. Thirdly, several strategies to reduce the poisonous effects of H2O and SO2, such as metal modification, proper support, the combination of metal modification and support, the rational design of structure and morphology, are summarized. Finally, perspectives and future directions of Mn-based catalysts for the low-temperature SCR of NOx are proposed.

  10. Substrate Effects on the High Temperature Oxidation Behavior of a Gold-Based Braze Filler Metal

    Energy Technology Data Exchange (ETDEWEB)

    Weil, K. Scott; Rice, Joseph P.

    2005-06-30

    Oxidation testing was conducted on a commercial gold-based braze alloy, Gold ABA, and on zirconia and stainless steel joining couples prepared using this braze filler metal. Preliminary results reveal that both substrates play a significant role in determining the overall oxidation resistance of the brazed joint.

  11. Study of the oxidation of Fe-Cr alloys at high temperatures; Estudo da oxidacao de ligas Fe-Cr a altas temperaturas

    Energy Technology Data Exchange (ETDEWEB)

    Carneiro, J.F.; Sabioni, A.C.S. [Universidade Federal de Ouro Preto (LDM/DF/UFOP), MG (Brazil). Dept. de Fisica. Lab. de Difusao em Materiais; Trindade, V.B. [Universidade Federal de Ouro Preto (DEMM/UFOP), MG (Brazil). Dept. de Engenharia Metalurgica e de Materiais; Ji, V. [Laboratoire d' Etude des Materiaux Hors-Equilibre (LEMHE), Orsay (France)

    2010-07-01

    The high temperature oxidation behavior of Fe-1.5%Cr, Fe-5.0%Cr, Fe-10%Cr and Fe- 15%Cr model alloys were investigated from 700 to 850 deg C, in air atmosphere. The oxidation treatments were performed in a thermobalance with a sensitivity of 1{mu}g. The oxide films grown by oxidation of the alloys were characterized by scanning electronic microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). The oxide films are Fe-Cr spinels with variable composition depending on the alloy composition. For all conditions studied, the oxidation kinetics of these alloys follow a parabolic law. The comparison of the oxidation rates of the four alloys, at 700 deg C, shows that the parabolic oxidation constants decrease from 1.96x10{sup -9}g{sup 2}.cm{sup -4}.s{sup -1}, for the alloy Fe-1.5% Cr, to 1.18 x 10-14g{sup 2}.cm{sup -4}.s{sup -1} for the alloy Fe-15% Cr. Comparative analysis of the oxidation behavior of the Fe-10%Cr and Fe-15%Cr alloys, between 700 and 850 deg C, shows that the oxidation rates of these alloys are comparable to 800 deg C, above this temperature the Fe-10%Cr alloy shows lower resistance to oxidation. (author)

  12. Resistance Switching Characteristics Induced by O2 Plasma Treatment of an Indium Tin Oxide Film for Use as an Insulator in Resistive Random Access Memory.

    Science.gov (United States)

    Chen, Po-Hsun; Chang, Ting-Chang; Chang, Kuan-Chang; Tsai, Tsung-Ming; Pan, Chih-Hung; Chen, Min-Chen; Su, Yu-Ting; Lin, Chih-Yang; Tseng, Yi-Ting; Huang, Hui-Chun; Wu, Huaqiang; Deng, Ning; Qian, He; Sze, Simon M

    2017-01-25

    In this study, an O2 inductively coupled plasma (ICP) treatment was developed in order to modify the characteristics of indium tin oxide (ITO) film for use as an insulator in resistive random access memory (RRAM). After the O2 plasma treatment, the previously conductive ITO film is oxidized and becomes less conductive. In addition, after capping the same ITO material for use as a top electrode, we found that the ITO/ITO(O2 plasma)/TiN device exhibits very stable and robust resistive switching characteristics. On the contrary, the nontreated ITO film for use as an insulator in the ITO/ITO/TiN device cannot perform resistance switching behaviors. The material analysis initially investigated the ITO film characteristics with and without O2 plasma treatment. The surface was less rough after O2 plasma treatment. However, the molar concentration of each element and measured sheet resistance results for the O2-plasma-treated ITO film were dramatically modified. Next, electrical measurements were carried out to examine the resistance switching stability under continuous DC and AC operation in this ITO/ITO(O2 plasma)/TiN device. Reliability tests, including endurance and retention, also proved its capability for use in data storage applications. In addition to these electrical measurements, current fitting method experiments at different temperatures were performed to examine and confirm the resistance switching mechanisms. This easily fabricated device, using a simple material combination, achieves excellent performance by using ITO with an O2 plasma treatment and can further the abilities of RRAM for use in remarkable potential applications.

  13. Facile synthesis of iron oxides/reduced graphene oxide composites: application for electromagnetic wave absorption at high temperature.

    Science.gov (United States)

    Zhang, Lili; Yu, Xinxin; Hu, Hongrui; Li, Yang; Wu, Mingzai; Wang, Zhongzhu; Li, Guang; Sun, Zhaoqi; Chen, Changle

    2015-03-19

    Iron oxides/reduced graphene oxide composites were synthesized by facile thermochemical reactions of graphite oxide and FeSO4 · 7H2O. By adjusting reaction temperature, α-Fe2O3/reduced graphene oxide and Fe3O4/reduced graphene oxide composites can be obtained conveniently. Graphene oxide and reduced graphene oxide sheets were demonstrated to regulate the phase transition from α-Fe2O3 to Fe3O4 via γ-Fe2O3, which was reported for the first time. The hydroxyl groups attached on the graphene oxide sheets and H2 gas generated during the annealing of graphene oxide are believed to play an important role during these phase transformations. These samples showed good electromagnetic wave absorption performance due to their electromagnetic complementary effect. These samples possess much better electromagnetic wave absorption properties than the mixture of separately prepared Fe3O4 with rGO, suggesting the crucial role of synthetic method in determining the product properties. Also, these samples perform much better than commercial absorbers. Most importantly, the great stability of these composites is highly advantageous for applications as electromagnetic wave absorption materials at high temperatures.

  14. Effect of Temperature on Expression of Resistance to Meloidogyne spp. In Common Bean (Phaseolus vulgaris).

    Science.gov (United States)

    Omwega, C O; Thomason, I J; Roberts, P A

    1990-10-01

    The effect of soil temperature on the expression of resistance in several common bean lines carrying resistance to root-knot nematodes (Meloidogyne spp.) was studied under controlled temperatures in temperature tank and growth chamber conditions. Resistance to M. javanica and M. incognita race 1 in bean lines A315, A328, A445, G1805, and G2618 was stable at 24-30 C. However, there was a significant increase in reproduction of M. javanica on A315, A328, and A445 when temperature was increased from 26 to 30 C. This increase did not reflect a change from a resistant to a susceptible reaction or classification. Resistance in A315 is derived from G1805, whereas resistance in A328 and A445 is derived from G2618. Alabama No. 1, PI 165426, and PI 165435, with resistance to M. incognita race 2, were heat stressed at temperatures above 27 C. Resistance to M. incognita race 2 in Alabama No. 1 and PI 165435 was lost at 30 C, but PI 165426 supported low reproduction of M. incognita race 2 at all temperatures. Poor root development at 30 C may have been responsible, in part, for the poor development of M. incognita race 2 on PI 165426.

  15. Oxide-Nanoparticle Containing Coatings for High Temperature Alloys

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-04-01

    This factsheet describes a study whose objective is to examine the feasibility of using Electromagnetic Stirring (EMS) techniques in dispersing the oxide nanoparticles uniformly within the liquid steel.

  16. The effects of cold rolling temperature on corrosion resistance of pure iron

    Science.gov (United States)

    Jinlong, Lv; Hongyun, Luo

    2014-10-01

    The effects of cold rolling temperature on grain size and grain orientation of pure iron were investigated. Comparing with sample rolled at room temperature, the grain refinement was facilitated in sample obtained by cryogenic cold rolling at liquid-nitrogen temperature. However, the grain orientation changed little for two samples. It was shown that cathodic hydrogen evolution reaction could govern the corrosion reaction for pure iron in sulfuric acid solution. The grain refinement obtained by rolling improved the corrosion resistance of iron in sulfuric acid solution, borate buffer solution and borate buffer solution with chloride ion. However, comparing with iron rolled at room temperature, the corrosion resistance of iron obtained by cryogenic temperature rolling was lower. Comparing with iron rolled at room temperature, higher dislocation density in iron rolled at cryogenic temperature reduced its corrosion resistance.

  17. Low temperature magnetic transition and high temperature oxidation in INCONEL alloy 718

    Energy Technology Data Exchange (ETDEWEB)

    Seehra, M.S.; Babu, V.S. [Physics Department, West Virginia University, Morgantown, West Virginia 26506-6315 (United States)

    1996-05-01

    X-ray diffraction and temperature dependent (5 K{endash}380 K) magnetic measurements have been carried out in INCONEL 718 superalloy before and after high temperature aging treatments (INCONEL is a trademark of the INCO family of companies). The nominal composition of this alloy is Ni (52.5{percent}), Cr (19.0{percent}), Fe (18.5{percent}), Nb (5.1{percent}), Mo (3.0{percent}), Ti (0.9{percent}), Al (0.5{percent}), Cu (0.15{percent}) and C (0.08{percent}) and it yields an x-ray diffraction pattern consisting of a fcc phase with {ital a}=3.5987 (3) A and an orthorhombic phase associated with {delta}{minus}Ni{sub 3}Nb. It is concluded that the fcc pattern is due to both the {gamma} austenitic phase and {gamma}{prime} Ni{sub 3}(Al,Ti) phase of alloy 718. The standard annealing and aging treatment carried out in air at temperatures between 621 and 982{degree}C produces surface oxides (Cr,Fe){sub 2}O{sub 3} and FeNbO{sub 4} (which are easily removed by etching and polishing) and contracts the lattice. Magnetic measurements show a distinct phase transition at {ital T}{sub {ital c}}=14 K, which has been attributed to the {gamma}{prime}{minus}Ni{sub 3}(Al,Ti) phase by the process of elimination and by observing that it has most of the characteristics of the weak itinerant ferromagnet Ni{sub 74.5}Al{sub 25.5}. This transition may have some effects on the cryogenic applications of this alloy. {copyright} {ital 1996 Materials Research Society.}

  18. Effect of temperature on the electro-oxidation of ethanol on platinum

    OpenAIRE

    Ana Paula M. Camargo; Bruno A. F. Previdello; Hamilton Varela; Ernesto R. Gonzalez

    2010-01-01

    We present in this work an experimental investigation of the effect of temperature (from 25 to 180 ºC) in the electro-oxidation of ethanol on platinum in two different phosphoric acid concentrations. We observed that the onset potential for ethanol electro-oxidation shifts to lower values and the reaction rates increase as temperature is increased for both electrolytes. The results were rationalized in terms of the effect of temperature on the adsorption of reaction intermediates, poisons, an...

  19. Deposition of low sheet resistance indium tin oxide directly onto functional small molecules

    KAUST Repository

    Franklin, Joseph B.

    2014-11-01

    © 2014 Elsevier B.V. All rights reserved. We outline a methodology for depositing tin-doped indium oxide (ITO) directly onto semiconducting organic small molecule films for use as a transparent conducting oxide top-electrode. ITO films were grown using pulsed laser deposition onto copper(II)phthalocyanine (CuPc):buckminsterfullerene (C60) coated substrates. The ITO was deposited at a substrate temperature of 150 °C over a wide range of background oxygen pressures (Pd) (0.67-10 Pa). Deposition at 0.67 ≤ Pd ≤ 4.7 Pa led to delamination of the organic films owing to damage induced by the high energy ablated particles, at intermediate 4.7 ≤ Pd < 6.7 Pa pressures macroscopic cracking is observed in the ITO. Increasing Pd further, ≥ 6.7 Pa, supports the deposition of continuous, polycrystalline and highly transparent ITO films without damage to the CuPc:C60. The free carrier concentration of ITO is strongly influenced by Pd; hence growth at > 6.7 Pa induces a significant decrease in conductivity; with a minimum sheet resistance (Rs) of 145 /□ achieved for 300 nm thick ITO films. To reduce the Rs a multi-pressure deposition was implemented, resulting in the formation of polycrystalline, highly transparent ITO with an Rs of - 20/□ whilst maintaining the inherent functionality and integrity of the small molecule substrate.

  20. Oxidative stress and diabetes: what can we learn about insulin resistance from antioxidant mutant mouse models?

    Science.gov (United States)

    Styskal, JennaLynn; Van Remmen, Holly; Richardson, Arlan; Salmon, Adam B.

    2011-01-01

    The development of metabolic dysfunctions like diabetes and insulin resistance in mammals is regulated by a myriad of factors. Oxidative stress seems to play a central role in this process as recent evidence shows a general increase in oxidative damage and a decrease in oxidative defense associated with several metabolic diseases. These changes in oxidative stress can be directly correlated with increased fat accumulation, obesity and consumption of high calorie/high fat diets. Modulation of oxidant protection through either genetic mutation or treatment with antioxidants can significantly alter oxidative stress resistance and accumulation of oxidative damage in laboratory rodents. Antioxidant mutant mice have previously been utilized to examine the role of oxidative stress in other disease models, but have been relatively unexplored as models to study the regulation of glucose metabolism. In this review, we will discuss the evidence for oxidative stress as a primary mechanism linking obesity and metabolic disorders and whether alteration of antioxidant status in laboratory rodents can significantly alter the development of insulin resistance or diabetes. PMID:22056908

  1. Cu-rGO subsurface layer creation on copper substrate and its resistance to oxidation

    Science.gov (United States)

    Pietrzak, Katarzyna; Strojny-Nędza, Agata; Olesińska, Wiesława; Bańkowska, Anna; Gładki, Andrzej

    2017-11-01

    On the basis of a specially designed experiment, this paper presents a model, which is an attempt to explain the mechanism of formatting and creating oxidation resistance of Cu-rGO subsurface layers. Practically zero chemical affinity of copper to carbon is a fundamental difficulty in creating composite structures of Cu-C, properties which are theoretically possible to estimate. In order to bind the thermally reduced graphene oxide with copper surface, the effect of structural rebuilding of the copper oxide, in the process of annealing in a nitrogen atmosphere, have been used. On intentionally oxidized and anoxic copper substrates the dispersed graphene oxide (GO) and thermally reduced graphene oxide (rGO) were loaded. Annealing processes after the binding effects of both graphene oxide forms to Cu substrates were tested. The methods for high-resolution electron microscopy were found subsurface rGO-Cu layer having a substantially greater resistance to oxidation than pure copper. The mechanism for the effective resistance to oxidation of the Cu-rGO has been presented in a hypothetical form.

  2. Electrical properties of undoped zinc oxide nanostructures at different annealing temperature

    Energy Technology Data Exchange (ETDEWEB)

    Nasir, M. F., E-mail: babaibaik2002@yahoo.com; Zainol, M. N., E-mail: nizarzainol@yahoo.com; Hannas, M., E-mail: mhannas@gmail.com [NANO-ElecTronic Centre (NET), Faculty of Electrical Engineering, Universiti Teknologi MARA (UiTM), 40450 Shah Alam, Selangor (Malaysia); Mamat, M. H., E-mail: mhmamat@salam.uitm.edu.my; Rusop, Mohamad, E-mail: rusop@salam.uitm.edu.my [NANO-ElecTronic Centre (NET), Faculty of Electrical Engineering, Universiti Teknologi MARA (UiTM), 40450 Shah Alam, Selangor (Malaysia); NANO-SciTech Centre (NST), Institute of Science (IOS), Universiti Teknologi MARA - UiTM, 40450 Shah Alam, Selangor (Malaysia); Rahman, S. A., E-mail: saadah@um.edu.my [NANO-ElecTronic Centre (NET), Faculty of Electrical Engineering, Universiti Teknologi MARA (UiTM), 40450 Shah Alam, Selangor (Malaysia); Low Dimensional Materials Research Centre, Physics Department, Faculty of Science, University of Malaya, 50603 Kuala Lumpur (Malaysia)

    2016-07-06

    This project has been focused on the electrical and optical properties respectively on the effect of Undoped zinc oxide (ZnO) thin films at different annealing temperature which is varied 400 °C, 450 °C, 500 °C, and 550 °C.Undoped ZnO solutions were deposited onto the glass substrates using sol-gel spin coating method. This project was involved with three phases, which are thin films preparation, deposition and characterization. The thin films were characterized using Current Voltage (I-V) measurement and UV-vis-NIR spectrophotometer for electrical properties and optical properties. The electrical properties show that the resistivity is the lowest at 500 °C which its resistivity is 5.36 × 10{sup 4} Ωcm{sup −1}. The absorption coefficient spectrum obtained from UV-Vis-NIR spectrophotometer measurement shows all films exhibit very low absorption in the visible (400-800 nm) and near infrared (NIR) (>800 nm) range but exhibit high absorption in the UV range.

  3. Biochemical basis of the high resistance to oxidative stress in ...

    Indian Academy of Sciences (India)

    Apoptosis; D. discoideum; oxidative stress; antioxidant enzymes; lipid peroxidation ... Dose-dependent induction of cell death by exogenous addition of hydrogen peroxide (H2O2), in situ generation of H2O2 by hydroxylamine, and nitric oxide (NO) generation by sodium nitroprusside treatment in D. discoideum were studied.

  4. Oxidation resistance of the nanostructured YSZ coating on the IN-738 superalloy

    Directory of Open Access Journals (Sweden)

    Ahmad Keyvani

    2014-12-01

    Full Text Available Conventional and nanostructured YSZ coatings were deposited on the IN-738 Ni super alloy by the atmospheric plasma spray technique. The oxidation was measured at 1100°C in an atmospheric electrical furnace. According to the experimental results the nanostructured coatings showed a better oxidation resistance than the conventional ones. The improved oxidation resistance of the nanocoating could be explained by the change in structure to a dense and more packed structure in this coating. The mechanical properties of the coatings were tested using the thermal cyclic, nanoindentation and bond strength tests, during which the nanostructured YSZ coating showed a better performance by structural stability.

  5. Degradation in Solid Oxide Cells During High Temperature Electrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Manohar Sohal

    2009-05-01

    Idaho National Laboratory has an ongoing project to generate hydrogen from steam using solid oxide electrolysis cells. One goal of that project is to address the technical and degradation issues associated with solid oxide electrolysis cells. This report covers a variety of these degradation issues, which were discussed during a workshop on “Degradation in Solid Oxide Electrolysis Cells and Strategies for its Mitigation,” held in Phoenix, AZ on October 27, 2008. Three major degradation issues related to solid oxide electrolysis cells discussed at the workshop are: • Delamination of O2-electrode and bond layer on steam/O2-electrode side • Contaminants (Ni, Cr, Si, etc.) on reaction sites (triple-phase boundary) • Loss of electrical/ionic conductivity of electrolyte. This list is not all inclusive, but the workshop summary can be useful in providing a direction for future research related to the degradation of solid oxide electrolysis cells.

  6. Moisture and temperature controls on nitrification differ among ammonia oxidizer communities from three alpine soil habitats

    Science.gov (United States)

    Osborne, Brooke B; Baron, Jill S.; Wallenstein, Matthew D.

    2016-01-01

    Climate change is altering the timing and magnitude of biogeochemical fluxes in many high elevation ecosystems. The consequent changes in alpine nitrification rates have the potential to influence ecosystem scale responses. In order to better understand how changing temperature and moisture conditions may influence ammonia oxidizers and nitrification activity, we conducted laboratory incubations on soils collected in a Colorado watershed from three alpine habitats (glacial outwash, talus, and meadow). We found that bacteria, not archaea, dominated all ammonia oxidizer communities. Nitrification increased with moisture in all soils and under all temperature treatments. However, temperature was not correlated with nitrification rates in all soils. Site-specific temperature trends suggest the development of generalist ammonia oxidizer communities in soils with greater in situ temperature fluctuations and specialists in soils with more steady temperature regimes. Rapidly increasing temperatures and changing soil moisture conditions could explain recent observations of increased nitrate production in some alpine soils.

  7. Effect of tin oxide nano particles and heat treatment on decay resistance and physical properties of beech wood (Fagus orientalis

    Directory of Open Access Journals (Sweden)

    Maryam Ghorbani

    2014-11-01

    Full Text Available This research was conducted to investigate the effect of Tin oxide nanoparticles and heat treatment on decay resistance and physical properties of beech wood. Biological and physical test samples were prepared according to EN-113 and ASTM-D4446-05 standards respectively. Samples were classified into 4 groups: control, impregnation with Tin oxide nanoparticles, heat treatment and nano-heat treatment. Impregnation with Tin oxide nano at 5000ppm concentration was carried out in the cylinder according to Bethell method. Then, samples were heated at 140, 160 and 185˚C for 2 and 4 hours. According to results, decay resistance improved with increasing time and temperature of heat treatment. Least weight loss showed 46.39% reduction in nano-heat samples treated at 180˚C for 4 hours in comparison with control at highest weight loss. Nano-heat treated samples demonstrated the maximum amount of water absorption without significant difference with control and nanoparticles treated samples. Increase in heat treatment temperature reduced water absorption so that it is revealed 47.8% reduction in heat treated samples at 180°C for 4h after 24h immersion in water. In nano-heat treated samples at 180˚C for 2h was measured least volume swelling. Volume swelling in nano-treated samples decreased 8.7 and 22.76% after 2 and 24 h immersion in comparison with the control samples respectively.

  8. Effect of Anode Pulse-Width on the Microstructure and Wear Resistance of Microarc Oxidation Coatings

    Directory of Open Access Journals (Sweden)

    Zhen-Wei Li

    2017-06-01

    Full Text Available Microarc oxidation (MAO coatings were prepared on 2024-T4 aluminum alloys using a pulsed bipolar power supply at different anode pulse-widths. After the MAO coatings were formed, the micropores and microcracks on the surface of the MAO coatings were filled with Fluorinated ethylene propylene (FEP dispersion for preparing MAO self-lubricating composite coatings containing FEP. The effect of the anode pulse-width on the microstructure and wear resistance of the microarc oxidation coatings was investigated. The wear resistance of the microarc oxidation self-lubricating composite coatings was analyzed. The results revealed that the MAO self-lubricating composite coatings integrated the advantages of wear resistance of the MAO ceramic coatings and a low friction coefficient of FEP. Compared to the MAO coatings, the microarc oxidation self-lubricating composite coatings exhibited a lower friction coefficient and lower wear rates.

  9. Effects of process parameters on sheet resistance uniformity of fluorine-doped tin oxide thin films

    Science.gov (United States)

    2012-01-01

    An alternative indium-free material for transparent conducting oxides of fluorine-doped tin oxide [FTO] thin films deposited on polyethylene terephthalate [PET] was prepared by electron cyclotron resonance - metal organic chemical vapor deposition [ECR-MOCVD]. One of the essential issues regarding metal oxide film deposition is the sheet resistance uniformity of the film. Variations in process parameters, in this case, working and bubbler pressures of ECR-MOCVD, can lead to a change in resistance uniformity. Both the optical transmittance and electrical resistance uniformity of FTO film-coated PET were investigated. The result shows that sheet resistance uniformity and the transmittance of the film are affected significantly by the changes in bubbler pressure but are less influenced by the working pressure of the ECR-MOCVD system. PMID:22221518

  10. Air-Impregnated Nanoporous Anodic Aluminum Oxide Layers for Enhancing the Corrosion Resistance of Aluminum.

    Science.gov (United States)

    Jeong, Chanyoung; Lee, Junghoon; Sheppard, Keith; Choi, Chang-Hwan

    2015-10-13

    Nanoporous anodic aluminum oxide layers were fabricated on aluminum substrates with systematically varied pore diameters (20-80 nm) and oxide thicknesses (150-500 nm) by controlling the anodizing voltage and time and subsequent pore-widening process conditions. The porous nanostructures were then coated with a thin (only a couple of nanometers thick) Teflon film to make the surface hydrophobic and trap air in the pores. The corrosion resistance of the aluminum substrate was evaluated by a potentiodynamic polarization measurement in 3.5 wt % NaCl solution (saltwater). Results showed that the hydrophobic nanoporous anodic aluminum oxide layer significantly enhanced the corrosion resistance of the aluminum substrate compared to a hydrophilic oxide layer of the same nanostructures, to bare (nonanodized) aluminum with only a natural oxide layer on top, and to the latter coated with a thin Teflon film. The hydrophobic nanoporous anodic aluminum oxide layer with the largest pore diameter and the thickest oxide layer (i.e., the maximized air fraction) resulted in the best corrosion resistance with a corrosion inhibition efficiency of up to 99% for up to 7 days. The results demonstrate that the air impregnating the hydrophobic nanopores can effectively inhibit the penetration of corrosive media into the pores, leading to a significant improvement in corrosion resistance.

  11. Advanced Catalysts for the Ambient Temperature Oxidation of Carbon Monoxide and Formaldehyde

    Science.gov (United States)

    Nalette, Tim; Eldridge, Christopher; Yu, Ping; Alpetkin, Gokhan; Graf, John

    2010-01-01

    The primary applications for ambient temperature carbon monoxide (CO) oxidation catalysts include emergency breathing masks and confined volume life support systems, such as those employed on the Shuttle. While Hopcalite is typically used in emergency breathing masks for terrestrial applications, in the 1970s, NASA selected a 2% platinum (Pt) on carbon for use on the Shuttle since it is more active and also more tolerant to water vapor. In the last 10-15 years there have been significant advances in ambient temperature CO oxidation catalysts. Langley Research Center developed a monolithic catalyst for ambient temperature CO oxidation operating under stoichiometric conditions for closed loop carbon dioxide (CO2) laser applications which is also advertised as having the potential to oxidize formaldehyde (HCHO) at ambient temperatures. In the last decade it has been discovered that appropriate sized nano-particles of gold are highly active for CO oxidation, even at sub-ambient temperatures, and as a result there has been a wealth of data reported in the literature relating to ambient/low temperature CO oxidation. In the shorter term missions where CO concentrations are typically controlled via ambient temperature oxidation catalysts, formaldehyde is also a contaminant of concern, and requires specially treated carbons such as Calgon Formasorb as untreated activated carbon has effectively no HCHO capacity. This paper examines the activity of some of the newer ambient temperature CO and formaldehyde (HCHO) oxidation catalysts, and measures the performance of the catalysts relative to the NASA baseline Ambient Temperature Catalytic Oxidizer (ATCO) catalyst at conditions of interest for closed loop trace contaminant control systems.

  12. Evaluation of elevated temperature properties of asphalt cement modified with aluminum oxide and calcium carbonate nanoparticles

    Science.gov (United States)

    Albrka Ali, Shaban Ismael; Ismail, Amiruddin; AlMansob, Ramez A.; Alhmali, Dhawo Ibrahim

    2017-09-01

    Higher temperature properties of the asphalt cement have been characterized before and after modification using dynamic shear rheometer (DSR) and viscosity testing. In this study, calcium carbonate nanoparticles (CaCO3) and aluminum oxide nanoparticles (Al2O3) have been added to the base asphalt cement with concentrations of 3, 5 and 7%.wt by the weight of the asphalt cement. The increase of CaCO3 and Al2O3 content has significant effect on the properties of asphalt cement. The viscosity of the modified asphalt cement increased up to 90 and 108% respectively compared to the base asphalt cement. In addition, the results showed that both modifiers have great storage stability and compatibility at elevated temperature. The evaluation of the rheological properties of asphalt cements revealed that the stiffness of the modified samples improved with additional increase of the modifier concentration of up to 5%, which indicates better resistance to rutting parameter. The enhancement was up to 388.89% for Al2O3 and 74.07% for CaCO3. As a result, the usage of CaCO3 and Al2O3 nanoparticles can be considered as appropriate alternative materials to modify asphalt cement.

  13. Effect of temperature on the electro-oxidation of ethanol on platinum

    Directory of Open Access Journals (Sweden)

    Ana Paula M. Camargo

    2010-01-01

    Full Text Available We present in this work an experimental investigation of the effect of temperature (from 25 to 180 ºC in the electro-oxidation of ethanol on platinum in two different phosphoric acid concentrations. We observed that the onset potential for ethanol electro-oxidation shifts to lower values and the reaction rates increase as temperature is increased for both electrolytes. The results were rationalized in terms of the effect of temperature on the adsorption of reaction intermediates, poisons, and anions. The formation of oxygenated species at high potentials, mainly in the more diluted electrolyte, also contributes to increase the electro-oxidation reaction rate.

  14. High Temperature Oxidation Behavior of T91 Steel in Dry and Humid Condition

    Directory of Open Access Journals (Sweden)

    Yonghao Leong

    2016-09-01

    Full Text Available High temperature oxidation behavior of T91 ferritic/martensitic steel was examined over the temperature range of 500 to 700°C in dry and humid environments.  The weight gain result revealed that oxidation occurs at all range of temperatures and its rate is accelerated by increasing the temperature. The weight gain of the oxidized steel at 700°C in steam condition was six times bigger than the dry oxidation.. SEM/EDX of the cross-sectional image showed that under dry condition, a protective and steady growth of the chromium oxide (Cr2O3 layer was formed on the steel with the thickness of 2.39±0.34 µm. Meanwhile for the humid environment, it is found that the iron oxide layer, which consists of the hematite (Fe2O3 and magnetite (Fe3O4 was formed as the outer scale, and spinnel as inner scale. This result indicated that the oxidation behavior of T91 steel was affected by its oxidation environment. The existence of water vapor in steam condition may prevent the formation of chromium oxide as protective layer.

  15. Ammonia oxidation at high pressure and intermediate temperatures

    DEFF Research Database (Denmark)

    Song, Yu; Hashemi, Hamid; Christensen, Jakob Munkholt

    2016-01-01

    was satisfactory. The main oxidation path for NH3 at high pressure under oxidizing conditions is NH3⟶+OH NH2⟶+HO2,NO2 H2NO⟶+O2 HNO⟶+O2 NO ⟶+NH2 N2. The modeling predictions are most sensitive to the reactions NH2 + NO = NNH + OH and NH2 + HO2 = H2NO + OH, which promote the ammonia consumption by forming OH...

  16. Growth kinetics of thin oxide layers; oxidation of Fe and Fe-N phases at room temperature

    NARCIS (Netherlands)

    Kooi, Bart J.; Somers, Marcel A.J.; Mittemeijer, Eric J.

    1996-01-01

    The evolution of iron-oxide layers at room temperature on pure polycrystalline α-Fe and on the Fe-N phases γ-Fe[N], γ'-Fe4N1-x and ε-Fe2N1-z was followed in situ with Auger-Electron Spectroscopy. The observed oxidation kinetics of the Fe and Fe-N phases were interpreted using a model considering

  17. High temperature, low expansion, corrosion resistant ceramic and gas turbine

    Science.gov (United States)

    Rauch, Sr., Harry W.

    1981-01-01

    The present invention relates to ZrO.sub.2 -MgO-Al.sub.2 O.sub.3 -SiO.sub.2 ceramic materials having improved thermal stability and corrosion resistant properties. The utilization of these ceramic materials as heat exchangers for gas turbine engines is also disclosed.

  18. Multispectral pyrometry for surface temperature measurement of oxidized Zircaloy claddings

    Science.gov (United States)

    Bouvry, B.; Cheymol, G.; Ramiandrisoa, L.; Javaudin, B.; Gallou, C.; Maskrot, H.; Horny, N.; Duvaut, T.; Destouches, C.; Ferry, L.; Gonnier, C.

    2017-06-01

    Non-contact temperature measurement in a nuclear reactor is still a huge challenge because of the numerous constraints to consider, such as the high temperature, the steam atmosphere, and irradiation. A device is currently developed at CEA to study the nuclear fuel claddings behavior during a Loss-of-Coolant Accident. As a first step of development, we designed and tested an optical pyrometry procedure to measure the surface temperature of nuclear fuel claddings without any contact, under air, in the temperature range 700-850 °C. The temperature of Zircaloy-4 cladding samples was retrieved at various temperature levels. We used Multispectral Radiation Thermometry with the hypothesis of a constant emissivity profile in the spectral ranges 1-1.3 μm and 1.45-1.6 μm. To allow for comparisons, a reference temperature was provided by a thermocouple welded on the cladding surface. Because of thermal losses induced by the presence of the thermocouple, a heat transfer simulation was also performed to estimate the bias. We found a good agreement between the pyrometry measurement and the temperature reference, validating the constant emissivity profile hypothesis used in the MRT estimation. The expanded measurement uncertainty (k = 2) of the temperature obtained by the pyrometry method was ±4 °C, for temperatures between 700 and 850 °C. Emissivity values, between 0.86 and 0.91 were obtained.

  19. Contact resistance of ceramic interfaces between materials used for solid oxide fuel cell applications

    Energy Technology Data Exchange (ETDEWEB)

    Koch, S.

    2002-01-01

    The contact resistance can be divided into two main contributions. The small area of contact between ceramic components results in resistance due to current constriction. Resistive phases or potential barriers at the interface result in an interface contribution to the contact resistance, which may be smaller or larger than the constriction resistance. The contact resistance between pairs of three different materials were analysed (strontium doped lanthanum manganite, yttria stabilised zirconia and strontium and nickel doped lanthanum cobaltite), and the effects of temperature, atmosphere, polarisation and mechanical load on the contact resistance were investigated. The investigations revealed that the mechanical load of a ceramic contact has a high influence on the contact resistance, and generally power law dependence between the contact resistance and the mechanical load was found. The influence of the mechanical load on the contact resistance was ascribed to an area effect. The contact resistance of the investigated materials was dominated by current constriction at high temperatures. The measured contact resistance was comparable to the resistance calculated on basis of the contact areas found by optical and electron microscopy. At low temperatures, the interface contribution to the contact resistance was dominating. The cobaltite interface could be described by one potential barrier at the contact interface, whereas the manganite interfaces required several consecutive potential barriers to model the observed behaviour. The current-voltage behaviour of the YSZ contact interfaces was only weakly non-linear, and could be described by 22{+-}1 barriers in series. Contact interfaces with sinterable contact layers were also investigated, and the measured contact resistance for these interfaces were more than 10 times less than for the other interfaces. (au)

  20. Light-off temperature determination of oxidation catalyst using FTIR technique

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, C.C. (Army Chemical Research, Development and Engineering Center, Aberdeen Proving Ground, MD (USA))

    1988-09-01

    There are various techniques to evaluate the performance of oxidation catalysts. Measurements of surface composition, surface structure, surface area, porosity, acidity, and dispersion of active metals of oxidation catalysts, etc., can be related to the catalyst performance. Other methods such as the decoloration of the indigo carmine solution to correlate the catalytic activity with the flash point and the recorder-equipped calorimeter technique to determine the ignition time, maximum temperature and maximum combustion temperature were used. For an oxidation catalyst, however, one direct measurement of its performance is to determine its light-off temperature, the temperature at which significant oxidation reactions occur. In generation, it is true that the lower the light-off temperature, the more effective will be the catalyst performance. Indeed, this correlation was used in the past to select the optimum reduction temperature and the duration of reduction for the preparation of the best Ni-containing catalyst. The authors have developed an in-situ FTIR technique for simultaneously determining the light-off temperatures and identifying catalytic oxidation products of oxidation catalysts. Using this newly developed technique, three three-way automatic catalysts were evaluated. The details of the subject technique and the results of catalyst performance evaluation are described in this paper.

  1. 10 000-hr Cyclic Oxidation Behavior of 68 High-Temperature Co-, Fe-, and Ni- Base Alloys Evaluated at 982 deg. C (1800 deg. F)

    Science.gov (United States)

    Barrett, Charles A.

    1999-01-01

    Power systems with operating temperatures in the range of 815 to 982 C (1500 to 1800 F) frequently require alloys that can operate for long times at these temperatures. A critical requirement is that these alloys have adequate oxidation resistance. The alloys used in these power systems require thousands of hours of operating life with intermittent shutdown to room temperature. Intermittent power plant shutdowns, however, offer the possibility that the protective scale will tend to spall (i.e., crack and flake off) upon cooling, increasing the rate of oxidative attack in subsequent heating cycles. Thus, it is critical that candidate alloys be evaluated for cyclic oxidation behavior. It was determined that exposing test alloys to ten 1000-hr cycles in static air at 982 10 000-hr Cyclic Oxidation Behavior of 68 High-Temperature Co-, Fe-, and Ni-Base Alloys Evaluated at 982 C (1800 F) could give a reasonable simulation of long-time power plant operation. Iron- (Fe-), nickel- (Ni-), and cobalt- (Co-) based high-temperature alloys with sufficient chromium (Cr) and/or aluminum (Al) content can exhibit excellent oxidation resistance. The protective oxides formed by these classes of alloys are typically Cr2O3 and/or Al2O3, and are usually influenced by their Cr, or Cr and Al, content. Sixty-eight Co-, Fe-, and Ni-base high-temperature alloys, typical of those used at this temperature or higher, were used in this study. At the NASA Lewis Research Center, the alloys were tested and compared on the basis of their weight change as a function of time, x-ray diffraction of the protective scale composition, and the physical appearance of the exposed samples. Although final appearance and x-ray diffraction of the final scale products were two factors used to evaluate the oxidation resistance of each alloy, the main criterion was the oxidation kinetics inferred from the specific weight change versus time data. These data indicated a range of oxidation behavior including parabolic

  2. Pressure and temperature induced electrical resistance change in nano-carbon/epoxy composites

    NARCIS (Netherlands)

    Shen, J. T.; Buschhorn, S. T.; De Hosson, J. Th. M.; Schulte, K.; Fiedler, B.

    2015-01-01

    In this study, we investigate the changes of electrical resistance of the carbon black (CB) and carbon nanotube (CNT) filled epoxy composites upon compression, swelling and temperature variation. For all samples we observe a decrease of electrical resistance under compression, while an increase of

  3. Electrical Resistivity of Natural Diamond and Diamond Films Between Room Temperature and 1200 C: Status Update

    Science.gov (United States)

    Vandersande, Jan W.; Zoltan, L. D.

    1993-01-01

    The electrical resistivity of diamond films has been measured between room temperature and 1200 C. The films were grown by either microwave Plasma CVD or combustion flame at three different places. The resistivities of the current films are compared to those measured for both natural IIa diamond and films grown only one to two years ago.

  4. Host Resistance and Temperature-Dependent Evolution of Aggressiveness in the Plant Pathogen Zymoseptoria tritici

    Directory of Open Access Journals (Sweden)

    Fengping Chen

    2017-06-01

    Full Text Available Understanding how habitat heterogeneity may affect the evolution of plant pathogens is essential to effectively predict new epidemiological landscapes and manage genetic diversity under changing global climatic conditions. In this study, we explore the effects of habitat heterogeneity, as determined by variation in host resistance and local temperature, on the evolution of Zymoseptoria tritici by comparing the aggressiveness development of five Z. tritici populations originated from different parts of the world on two wheat cultivars varying in resistance to the pathogen. Our results show that host resistance plays an important role in the evolution of Z. tritici. The pathogen was under weak, constraining selection on a host with quantitative resistance but under a stronger, directional selection on a susceptible host. This difference is consistent with theoretical expectations that suggest that quantitative resistance may slow down the evolution of pathogens and therefore be more durable. Our results also show that local temperature interacts with host resistance in influencing the evolution of the pathogen. When infecting a susceptible host, aggressiveness development of Z. tritici was negatively correlated to temperatures of the original collection sites, suggesting a trade-off between the pathogen’s abilities of adapting to higher temperature and causing disease and global warming may have a negative effect on the evolution of pathogens. The finding that no such relationship was detected when the pathogen infected the partially resistant cultivars indicates the evolution of pathogens in quantitatively resistant hosts is less influenced by environments than in susceptible hosts.

  5. Influence of temperature on strength and failure mechanisms of resistance welded thermoplastic composites joints

    NARCIS (Netherlands)

    Koutras, N.; Fernandez Villegas, I.; Benedictus, R.

    2015-01-01

    In this work, the effect of temperature exposure on the strength of resistance welded joints is analysed. Glass fibre polyphenylene sulphide (GF/PPS) laminates were joined using the resistance welding technique and a stainless steel metal mesh as the heating element. Single lap shear tests at

  6. Siderophores in clinical isolates of Klebsiella pneumoniae promote ciprofloxacin resistance by inhibiting the oxidative stress.

    Science.gov (United States)

    Zhang, Wenli; Zhang, Ying; Wang, Xinxin; Ding, Fengshu; Fu, Yingmei; Zhao, Jizi; Song, Wuqi; Opiyo, Ogutu James; Zhang, Fengmin; Chen, Xiaobei

    2017-09-23

    To explore the relevance of and understand the potential mechanisms behind the production of siderophores by clinical isolates of K. pneumoniae and ciprofloxacin (CIP) resistance, we divided the K. pneumoniae isolates into two groups based on bacterial siderophores production: high siderophore-yielding group (39 strains) and low siderophore-yielding group (38 strains). The rate of CIP resistance in K. pneumoniae (27/39 = 69.23%) from the high siderophore-yielding group was significantly higher than that (16/38 = 42.11%) in the low siderophore-yielding group (p  0.05). Siderophore-related antibiotic resistance was accompanied by efflux pump functions, but was not directly relevant to it. Furthermore, we found that the oxidative stress response was significantly lower in high siderophore-yielding strains compared to those isolates which had a low siderophores yield (12.17 vs. 30.91 of average fluorescence value; p oxidative stress response (p oxidative stress in both high and low siderophore-yielding strains (p oxidative stress in high siderophore-yielding strains was significantly lower than in low siderophore-yielding strains (p oxidative stress response, indicating that reduction of bacterial oxidative stress could provide a new avenue for control of bacterial drug resistance. Copyright © 2017. Published by Elsevier Inc.

  7. Serum lipid resistance to oxidation and uric acid levels in subjects with Down's syndrome.

    Science.gov (United States)

    Nagyová, A; Sustrová, M; Raslová, K

    2000-01-01

    In subjects with Down's syndrome (DS) increased oxidative stress and consequent oxidative cell damage have been reported. The aim of this study was to assess whether the excessive production of free oxygen radicals in these subjects can affect the copper-induced lipid oxidation resistance measured in fresh whole serum. Since a significant elevation of serum uric acid levels, which is an efficient hydrophilic antioxidant, has been repeatedly reported in subjects with DS, we studied the association between increased serum uric acid levels and lipid resistance to oxidation measured directly in serum samples by monitoring the change in absorbance at 234 nm. The group of subjects with Down's syndrome consisted of 25 individuals (aged 18+/-5 years). Control group included brothers and sisters of subjects with DS (n = 25, aged 17+/-7 years). In subjects with DS, the serum lipid resistance to oxidation (lag time) was significantly higher than in controls (puric acid levels was observed (puric acid concentration was found in subjects with DS (r = 0.48, puric acid levels repeatedly observed in subjects with DS may be associated with an enhanced resistance of serum lipids to oxidation which is thought to play an important role in the atherogenic process.

  8. Interaction mechanisms between slurry coatings and solid oxide fuel cell interconnect alloys during high temperature oxidation

    DEFF Research Database (Denmark)

    Persson, Åsa Helen; Mikkelsen, L.; Hendriksen, P.V.

    2012-01-01

    oxidation rate constant was reduced with 50–90% of that for uncoated alloy. One coating consisting of MnCo2O4 did not significantly affect the oxidation rate of the alloy, and just as for uncoated samples break-away oxidation occurred for MnCo2O4 coated samples. The interaction mechanisms between...

  9. Atomistic study of ternary oxides as high-temperature solid lubricants

    Science.gov (United States)

    Gao, Hongyu

    Friction and wear are important tribological phenomena tightly associated with the performance of tribological components/systems such as bearings and cutting machines. In the process of contact and sliding, friction and wear lead to energy loss, and high friction and wear typically result in shortened service lifetime. To reduce friction and wear, solid lubricants are generally used under conditions where traditional liquid lubricants cannot be applied. However, it is challenging to maintain the functionality of those materials when the working environment becomes severe. For instance, at elevated temperatures (i.e., above 400 °C), most traditional solid lubricants, such as MoS2 and graphite, will easily oxidize or lose lubricity due to irreversible chemical changes. For such conditions, it is necessary to identify materials that can remain thermally stable as well as lubricious over a wide range of temperatures. Among the currently available high-temperature solid lubricants, Ag-based ternary metal oxides have recently drawn attention due to their low friction and ability to resist oxidation. A recent experimental study showed that the Ag-Ta-O ternary exhibited an extremely low coefficient of friction (0.06) at 750 °C. To fully uncover the lubricious nature of this material as a high-temperature solid lubricant, a series of tribological investigations were carried out based on one promising candidate - silver tantalate (AgTaO3). The study was then extended to alternative materials, Cu-Ta-O ternaries, to accommodate a variety of application requirements. We aimed to understand, at an atomic level, the effects of physical and chemical properties on the thermal, mechanical and tribological behavior of these materials at high temperatures. Furthermore, we investigated potassium chloride films on a clean iron surface as a representative boundary lubricating system in a nonextreme environment. This investigation complemented the study of Ag/Cu-Ta-O and enhanced the

  10. Determination the mechanism and kinetic parameters of copper sulfide minerals oxidation at elevated temperatures

    Directory of Open Access Journals (Sweden)

    Štrbac Nada D.

    2015-01-01

    Full Text Available The paper presents DTA/TG results of polymetallic sulphide copper concentrate from the mine 'Veliki Krivelj' (Serbia at 25-1000 °C. The reaction mechanism at elevated temperatures was proposed. As confirmation to the proposed mechanism, the results of EDXRF and, XRD analysis of the initial sample and the oxidation products at 550 and 950 °C, and the results of SEM/EDS analysis of the initial sample and the oxidation products at 675 ° C were presented. It can be concluded that the oxidation process goes through sulfide oxidation with characteristic exothermic effects, followed by sulfates and oxy- sulfates formation and their. Kinetic analysis of the oxidation process concentrates the test was performed according to the methods of Kissinger and Ozawa in non-isothermal conditions. The results of kinetic studies have shown that the oxidation process in the whole investigated temperature range is located in the kinetic field.

  11. Intermetallic diffusion coatings for enhanced hot-salt oxidation resistance of nitrogen-containing austenitic stainless steels

    Science.gov (United States)

    Mudali, U. Kamachi; Bhuvaneswaran, N.; Shankar, P.; Khatak, H. S.; Raj, B.

    2004-06-01

    This article presents the preparation, characterization, and hot-salt oxidation behavior of nitrogen-containing type 316L stainless steel (SS), surface modified with intermetallic coatings. Three different types of intermetallic coating systems, containing aluminum, titanium, and titanium/aluminum multilayers, were formed by diffusion annealing of type 316L austenitic SS containing 0.015, 0.1, 0.2, and 0.56 pct nitrogen. Analysis by using X-ray diffraction (XRD), scanning electron microscopy (SEM), and secondary ion mass spectroscopy (SIMS) confirmed the formation of various intermetallic phases such as AIN, Al13Fe4, FeAl2, FeTi, Ti2N, and Ti3Al in the coatings. Hot salt oxidation behavior of the uncoated and surface-modified stainless steels was assessed by periodic monitoring of the weight changes of NaCl salt-applied alloys kept in an air furnace at 1023 K up to 250 hours. The oxide scales formed were examined by XRD and stereomicroscopy. Among the various surface modifications investigated in the present study, the results indicate that the titanium-modified alloys show the best hot-salt oxidation resistance with the formation of an adherent, protective, thin, and continuous oxide layer. Among the four N-containing alloys investigated, the titanium and Ti/Al multilayer modified 0.56 pct N alloy showed the best hot-salt oxidation resistance as compared to uncoated alloys. The slower corrosion kinetics and adherent scale morphology indicate that the surface-modified titanium intermetallic coatings could provide high-temperature service applications up to 1073 K, particularly in chloride containing atmospheres, for austenitic stainless steels.

  12. Hsp33 confers bleach resistance by protecting elongation factor Tu against oxidative degradation in Vibrio cholerae

    National Research Council Canada - National Science Library

    Wholey, Wei‐Yun; Jakob, Ursula

    2012-01-01

    The redox‐regulated chaperone Hsp33 protects bacteria specifically against stress conditions that cause oxidative protein unfolding, such as treatment with bleach or exposure to peroxide at elevated temperatures...

  13. High-temperature Oxidation of Fe-Cr Steels in Steam Condition – A Review

    Directory of Open Access Journals (Sweden)

    Tedi Kurniawan

    2016-05-01

    Full Text Available The development of supercritical (SC and ultra-supercritical (USC power plants requires materials with better corrosion properties. Deep understanding on the oxidation mechanism in the boiler environment is one of the important factors to support this development. In this work, high temperature oxidation of Fe-Cr steels in steam condition is reviewed.  Several mechanisms that explain the effect of water vapor in the oxidation behavior the steel were presented.

  14. High-Temperature Oxidation of Plutonium Surrogate Metals and Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Sparks, Joshua C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Krantz, Kelsie E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Christian, Jonathan H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Washington, II, Aaron L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-07-27

    The Plutonium Management and Disposition Agreement (PMDA) is a nuclear non-proliferation agreement designed to remove 34 tons of weapons-grade plutonium from Russia and the United States. While several removal options have been proposed since the agreement was first signed in 2000, processing the weapons-grade plutonium to mixed-oxide (MOX) fuel has remained the leading candidate for achieving the goals of the PMDA. However, the MOX program has received its share of criticisms, which causes its future to be uncertain. One alternative pathway for plutonium disposition would involve oxidizing the metal followed by impurity down blending and burial in the Waste Isolation Pilot Plant (WIPP) in Carlsbad, New Mexico. This pathway was investigated by use of a hybrid microwave and a muffle furnace with Fe and Al as surrogate materials. Oxidation occurred similarly in the microwave and muffle furnace; however, the microwave process time was significantly faster.

  15. Mitochondrial CoQ deficiency is a common driver of mitochondrial oxidants and insulin resistance

    Science.gov (United States)

    Fazakerley, Daniel J; Chaudhuri, Rima; Yang, Pengyi; Maghzal, Ghassan J; Thomas, Kristen C; Krycer, James R; Humphrey, Sean J; Parker, Benjamin L; Fisher-Wellman, Kelsey H; Meoli, Christopher C; Hoffman, Nolan J; Diskin, Ciana; Burchfield, James G; Cowley, Mark J; Kaplan, Warren; Modrusan, Zora; Kolumam, Ganesh; Yang, Jean YH; Chen, Daniel L; Samocha-Bonet, Dorit; Greenfield, Jerry R; Hoehn, Kyle L

    2018-01-01

    Insulin resistance in muscle, adipocytes and liver is a gateway to a number of metabolic diseases. Here, we show a selective deficiency in mitochondrial coenzyme Q (CoQ) in insulin-resistant adipose and muscle tissue. This defect was observed in a range of in vitro insulin resistance models and adipose tissue from insulin-resistant humans and was concomitant with lower expression of mevalonate/CoQ biosynthesis pathway proteins in most models. Pharmacologic or genetic manipulations that decreased mitochondrial CoQ triggered mitochondrial oxidants and insulin resistance while CoQ supplementation in either insulin-resistant cell models or mice restored normal insulin sensitivity. Specifically, lowering of mitochondrial CoQ caused insulin resistance in adipocytes as a result of increased superoxide/hydrogen peroxide production via complex II. These data suggest that mitochondrial CoQ is a proximal driver of mitochondrial oxidants and insulin resistance, and that mechanisms that restore mitochondrial CoQ may be effective therapeutic targets for treating insulin resistance. PMID:29402381

  16. Autotrophic Growth of Bacterial and Archaeal Ammonia Oxidizers in Freshwater Sediment Microcosms Incubated at Different Temperatures

    OpenAIRE

    Wu, Yucheng; Ke, Xiubin; Hernández, Marcela; Wang, Baozhan; Dumont, Marc G.; Jia, Zhongjun; Conrad, Ralf

    2013-01-01

    Both bacteria and archaea potentially contribute to ammonia oxidation, but their roles in freshwater sediments are still poorly understood. Seasonal differences in the relative activities of these groups might exist, since cultivated archaeal ammonia oxidizers have higher temperature optima than their bacterial counterparts. In this study, sediment collected from eutrophic freshwater Lake Taihu (China) was incubated at different temperatures (4°C, 15°C, 25°C, and 37°C) for up to 8 weeks. We e...

  17. High-temperature oxidation behaviour of Ti3 Alx C2 in air

    Indian Academy of Sciences (India)

    Administrator

    than that of silicon at high temperature. The compound can be described by the formula, Ti3Si(1–x)AlxC2 (0 < x. < 0⋅16) (Zhu and Mei 2009). In the following ... phases of oxide using a rotating anode X-ray diffracto- meter (Model D/MAX-RB, RIGAKU Corporation,. Japan). The microstructures of oxide scales were investi-.

  18. Gold-Catalyzed Aerobic Oxidation of 5-Hydroxymethylfurfural in Water at Ambient Temperature

    DEFF Research Database (Denmark)

    Gorbanev, Yury; Kegnæs, Søren; Woodley, John

    2009-01-01

    The aerobic oxidation of 5-hydroxymethylfurfural, a versatile biomass-derived chemical, is examined in water with a titania-supported gold-nanoparticle catalyst at ambient temperature (30 degrees C). The selectivity of the reaction towords 2,5-furandicarboxylic acid and the intermediate oxidation...

  19. Hydrogen oxidation at high pressure and intermediate temperatures: experiments and kinetic modeling

    DEFF Research Database (Denmark)

    Hashemi, Hamid; Christensen, Jakob Munkholt; Gersen, Sander

    2015-01-01

    Hydrogen oxidation at 50 bar and temperatures of 700–900 K was investigated in a high pressure laminar flow reactor under highly diluted conditions. The experiments provided information about H 2 oxidation at pressures above the third explosion limit. The fuel–air equivalence ratio of the reactants...

  20. Processing and Fabrication of High Temperature Oxide Superconductors

    Science.gov (United States)

    1992-11-30

    XRD analysis of this calcined powder showed that metallic Cu, Y203, and BaCO3 formed, suggesting that NH3 is too strongly reducing and not suitable for...December 4, 1990). 10. S. M. Johnson and M. I. Gusman, "Microstructure and Critical Current Density in High-Tc Metal Oxide Superconductors," EPRI Final...superconducting closed. ceramic oxides indicate that only crude methods of D. W. Johnson et a., in the CeramicA Bulletin, VoL 53, powder preparation are

  1. Influence of Oxidation Behavior of Feedstock on Microstructure and Ablation Resistance of Plasma-Sprayed Zirconium Carbide Coating

    Science.gov (United States)

    Hu, Cui; Ge, Xuelian; Niu, Yaran; Li, Hong; Huang, Liping; Zheng, Xuebin; Sun, Jinliang

    2015-10-01

    Plasma spray is one of the suitable technologies to deposit carbide coatings with high melting point, such as ZrC. However, in the spray processes performed under atmosphere, oxidation of the carbide powder is inevitable. To investigate the influence of the oxidation behavior of feedstock on microstructure and ablation resistance of the deposited coating, ZrC coatings were prepared by atmospheric and vacuum plasma spray (APS and VPS) technologies, respectively. SiC-coated graphite was applied as the substrate. The obtained results showed that the oxidation of ZrC powder in APS process resulted in the formation of ZrO and Zr2O phases. Pores and cracks were more likely to be formed in the as-sprayed APS-ZrC coating. The VPS-ZrC coating without oxides possessed denser microstructure, higher thermal diffusivity, and lower coefficients of thermal expansion as compared with the APS-ZrC coating. A dense ZrO2 layer would be formed on the surface of the VPS-ZrC-coated sample during the ablation process and the substrate can be protected sufficiently after being ablated in high temperature plasma jet. However, the ZrO2 layer, formed by oxidation of the APS-ZrC coating having loose structure, was easy to be washed away by the shearing action of the plasma jet.

  2. Temperature sensitivity of resistance to two pathotypes of Plasmodiophora brassicae in Brassica oleracea

    Directory of Open Access Journals (Sweden)

    R. L. Gabrielson

    2013-12-01

    Full Text Available Several methods were evaluated in an attempt to develop a greenhouse screening procedure that would predict field resistance of brassica breeding lines to clubroot disease caused by Plasmodiophora brassicae. Several Brassica oleracea cultivars and breeding lines bred for resistance to Plasmodiophora brassicae and a susceptible Chinese cabbage cultivar were exposed to high levels of inoculum of both pathotypes PB 6, PB 7 at 12, 15, 20, 25 and 30°C. No infection occurred on any host at 12°C. Chinese cabbage was heavily diseased from 15-30°C. Bagder Shipper cabbage, a cauliflower deriving resistance from this variety, and Oregon CR-1 broccoli were resistant to pathotype PB 6 at 15 and 20°C and partially resistant at 25 and 30°C. They were resistant to pathotype PB 7 and 15°C and almost totally susceptible at 20, 25° and 30°C. Oregon cabbage line OR 123 was resistant to pathotype PB 6 at 15°C at almost completely susceptible at 20, 25 and 30°C. It was resistant to pathotype PB 7 at all temperatures. Temperature sensitivity of resistance can partially explain why breeding lines are resistant in field trials and susceptible in greenhouse tests.

  3. Contact Resistance of Tantalum Coatings in Fuel Cells and Electrolyzers using Acidic Electrolytes at Elevated Temperatures

    DEFF Research Database (Denmark)

    Jensen, Annemette Hindhede; Christensen, Erik; Barner, Jens H. Von

    2014-01-01

    Tantalum has so far been found to be the only construction material with sufficient corrosion resistance for high temperature polymer electrolyte membrane electrolyzers using acidic electrolytes above 100◦C. In this work the interfacial contact resistances of tantalum plates and tantalum coated...... stainless steel were found to be far below the US Department of Energy target value of 10mcm2. The good contact resistance of tantalum was demonstrated by simulating high temperature polymer electrolyte membrane electrolysis conditions by anodization performed in 85% phosphoric acid at 130◦C, followed...

  4. RESISTIVITY OF TmSe UNDER PRESSURE AT VERY LOW TEMPERATURE

    OpenAIRE

    Flouquet, J.; Haen, P.; HOLTZBERG, F; Lapierre, F.; Mignot, Jean; Ribault, M.; Tournier, R.

    1980-01-01

    Resistivity measurements of a nearly stoichiometric sample up to 6 kbar and down to 25 mK are reported. For 6 kbar, the resistivity ρ rises up to 120 mΩ.cm at 30 mK whereas just above the ordering temperature TN at 4.2 K its value is 1.65 mΩ.cm. The increase of ρ is exponential with the pressure at very low temperature and linear in the vicinity of TN. Comparisons are made with the pressure dependence of the sublattice magnetization measured by neutron diffraction and with resistivity of othe...

  5. Development and Characterization of Temperature-resistant Polymer Electrolytes

    DEFF Research Database (Denmark)

    Qingfeng, Li; Hjuler, Hans Aage; Bjerrum, Niels

    1999-01-01

    Acid-doped PBI polymer electrolyte membranes have been developed and characterized for fuel cell applications at temperatures up to 200°C. Electric conductivity as high as 0.13 S/cm is obtained at 160°C at high doping levels. The water osmotic drag coefficient of the polymer electrolyte is found...... to be virtually zero, which allows a fuel cell to operate with no external humidification. At operational temperatures up to 200°C, a fuel cell based on this polymer membrane exhibits promising performance....

  6. Pneumococcal Gene Complex Involved in Resistance to Extracellular Oxidative Stress

    NARCIS (Netherlands)

    Farshchi Andisi, Vahid; Hinojosa, Cecilia A.; de Jong, Anne; Kuipers, Oscar P.; Orihuela, Carlos J.; Bijlsma, Jetta J. E.

    Streptococcus pneumoniae is a Gram-positive bacterium which is a member of the normal human nasopharyngeal flora but can also cause serious disease such as pneumonia, bacteremia, and meningitis. Throughout its life cycle, S. pneumoniae is exposed to significant oxidative stress derived from

  7. High Temperature Reactions of Uranium Dioxide with Various Metal Oxides

    Science.gov (United States)

    1956-02-20

    difficulties described in (2) and (3). However, sagging of the helix, blocking the line of sight, was a troublesome problem . REFRACTORY METAL HEATER...Jr., Uranium oxide phase equilibrium systems: IV, UOr- ThOg , J. Am. Ceram. Soc. 36, 397 (1953). [20] H. von Wartenberg and E. Prophet, Melting diagrams

  8. Partial oxidation of methane in a temperature-controlled dielectric barrier discharge reactor

    KAUST Repository

    Zhang, Xuming

    2015-01-01

    We studied the relative importance of the reduced field intensity and the background reaction temperature in the partial oxidation of methane in a temperature-controlled dielectric barrier discharge reactor. We obtained important mechanistic insight from studying high-temperature and low-pressure conditions with similar reduced field intensities. In the tested range of background temperatures (297 < T < 773 K), we found that the conversion of methane and oxygen depended on both the electron-induced chemistry and the thermo-chemistry, whereas the chemical pathways to the products were overall controlled by the thermo-chemistry at a given temperature. We also found that the thermo-chemistry enhanced the plasma-assisted partial oxidation process. Our findings expand our understanding of the plasma-assisted partial oxidation process and may be helpful in the design of cost-effective plasma reformers. © 2014 The Combustion Institute.

  9. Study of oxide and α-Zr(O) growth kinetics from high temperature steam oxidation of Zircaloy-4 cladding

    Energy Technology Data Exchange (ETDEWEB)

    Sawarn, Tapan K., E-mail: sawarn@barc.gov.in; Banerjee, Suparna, E-mail: sup@barc.gov.in; Samanta, Akanksha, E-mail: akanksha@barc.gov.in; Rath, B.N., E-mail: bibhur@barc.gov.in; Kumar, Sunil, E-mail: sunilkmr@barc.gov.in

    2015-12-15

    Oxidation kinetics of Zircaloy-4 cladding of fuel pins of Indian pressurized heavy water reactors (IPHWRs) under a simulated loss of coolant accident (LOCA) condition was investigated. The kinetic rate constants for the oxide and oxygen stabilized α-Zr phase growth were established from the isothermal metal-steam reaction at high temperatures (900–1200 °C) with soaking periods in the range of 60–900 s. Oxide and α-Zr(O) layer thickness were measured to derive the respective growth rates. The observed rates obeyed a parabolic law and Arrhenius expressions of rate constants were established. Percentage equivalent clad reacted (%ECR) was calculated using Baker-Just equation. Hydrogen estimation was carried out on the oxidized samples using inert gas fusion technique. The hydrogen pick up was found to be in the range 10–30 ppm. The measured values of oxide and α-Zr(O) layer thickness were compared with the results obtained using OXYCON, an indigenously developed model. The model predicts the oxide growth reasonably well but under predicts the α-Zr(O) growth significantly at thickness values higher than 80 μm. - Highlights: • Steam oxidation kinetics of IPHWR fuel cladding material, Zircaloy-4 in the temperature range 900–1200 °C has been studied. • The growth kinetics of the oxide and α-Zr(O) were established from the microstructural analysis. • An indigenously developed model, OXYCON has been validated against the experimental data. • The hydrogen pick up in the cladding during oxidation was observed to be in the range 10–30 ppm.

  10. Ni–Ta–O mixed oxide catalysts for the low temperature oxidative dehydrogenation of ethane to ethylene

    KAUST Repository

    Zhu, Haibo

    2015-09-01

    The "wet" sol-gel and "dry" solid-state methods were used to prepare Ni-Ta-O mixed oxide catalysts. The resulting Ni-Ta oxides exhibit high activity and selectivity for the low temperature oxidative dehydrogenation of ethane to ethylene. The Ta/(Ni + Ta) atomic ratios (varying from 0 to 0.11 in "wet" sol-gel method, and from 0 to 0.20 in "dry" solid-state method) as well as the preparation methods used in the synthesis, play important roles in controlling catalyst structure, activity, selectivity and stability in the oxidative dehydrogenation of ethane. Electron microscopy characterizations (TEM, EELS mapping, and HAADF-STEM) clearly demonstrate that the Ta atoms are inserted into NiO crystal lattice, resulting in the formation of a new Ni-Ta oxide solid solution. More Ta atoms are found to be located at the lattice sites of crystal surface in sol-gel catalyst. While, a small amount of thin layer of Ta2O5 clusters are detected in solid-state catalyst. Further characterization by XRD, N2 adsorption, SEM, H2-TPR, XPS, and Raman techniques reveal different properties of these two Ni-Ta oxides. Due to the different properties of the Ni-Ta oxide catalysts prepared by two distinct approaches, they exhibit different catalytic behaviors in the ethane oxidative dehydrogenation reaction at low temperature. Thus, the catalytic performance of Ni-Ta-O mixed oxide catalysts can be systematically modified and tuned by selecting a suitable synthesis method, and then varying the Ta content. ©2015 Elsevier Inc. All rights reserved.

  11. Contact Resistance of Ceramic Interfaces Between Materials Used for Solid Oxide Fuel Cell Applications

    DEFF Research Database (Denmark)

    Koch, Søren

    be smaller or larger than the constriction resistance. The contact resistance between pairs of three different materials were analysed (stron-tium doped lanthanum manganite, yttria stabilised zirconia and strontium and nickel doped lanthanum cobaltite), and the effects of temperature, atmosphere...

  12. Graphene oxide in the water environment could affect tetracycline-antibiotic resistance.

    Science.gov (United States)

    Guo, Mei-Ting; Zhang, Guo-Sheng

    2017-09-01

    In recent years, the influence of new materials like nanoparticles in the water environment on biological substances has been widely studied. Antibiotic resistance genes (ARGs) represent a new type of pollutant in the environment. Graphene oxide (GO), as a nano material, because of its unique structure, may have an impact on antibiotic resistance bacteria (ARB) and ARGs; however the research in this area is rarely reported. Therefore, this study mainly investigated the effects of GO on bacterial antibiotic resistance. The results showed that GO had a limited effect on ARB inactivation. A high concentration of GO (>10 mg/L) can damage resistant plasmids to reduce bacterial resistance to antibiotics, but low concentrations of GO (antibiotic resistance needs further investigation. Copyright © 2017. Published by Elsevier Ltd.

  13. Low resistance Ohmic contact to p-type crystalline silicon via nitrogen-doped copper oxide films

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Xinyu, E-mail: xinyu.zhang@anu.edu.au; Wan, Yimao; Bullock, James; Allen, Thomas; Cuevas, Andres [Research School of Engineering, The Australian National University, Canberra ACT 0200 (Australia)

    2016-08-01

    This work explores the application of transparent nitrogen doped copper oxide (CuO{sub x}:N) films deposited by reactive sputtering to create hole-selective contacts for p-type crystalline silicon (c-Si) solar cells. It is found that CuO{sub x}:N sputtered directly onto crystalline silicon is able to form an Ohmic contact. X-ray photoelectron spectroscopy and Raman spectroscopy measurements are used to characterise the structural and physical properties of the CuO{sub x}:N films. Both the oxygen flow rate and the substrate temperature during deposition have a significant impact on the film composition, as well as on the resulting contact resistivity. After optimization, a low contact resistivity of ∼10 mΩ cm{sup 2} has been established. This result offers significant advantages over conventional contact structures in terms of carrier transport and device fabrication.

  14. Effects of sintering temperatures on microstructure and wear resistance of iron-silica composite

    Science.gov (United States)

    Amir, Adibah; Mamat, Othman

    2015-07-01

    Ceramic particle reinforced into metal base matrix composite has been reported to produce higher strength and wear resistance than its alloys because the ceramic phases can strongly resist abrasion. In this study the iron matrix was reinforced with two compositions of 20 and 25 wt. % fine silica particles. The compacts were produced by using powder metallurgy fabrication technique and sintered at three sintering temperatures: 1000, 1100 and 1200°C. Effects of various sintering temperatures on microstructures and the composite's wear resistance were evaluated via optical and SEM microscopy. Both compositions were also subjected to ball-on-disk wear test. The results showed the reinforcement weight fraction of 20 wt.% of silica and sintering temperature at 1100°C exhibited better result, in all aspects. It possessed higher mechanical properties, it's microstructure revealed most intact reinforcing region and it displayed higher wear resistance during wear test.

  15. Temperature dependence of the electrical resistivity of amorphous Co 80-xEr xB 20 alloys

    Science.gov (United States)

    Touraghe, O.; Khatami, M.; Menny, A.; Lassri, H.; Nouneh, K.

    2008-06-01

    The temperature dependence of the electrical resistivity of amorphous Co 80-xEr xB 20 alloys with x=0, 3.9, 7.5 and 8.6 prepared by melt spinning in pure argon atmosphere was studied. All amorphous alloys investigated here are found to exhibit a resistivity minimum at low temperature. The electrical resistivity exhibits logarithmic temperature dependence below the temperature of resistivity minimum Tmin. In addition, the resistivity shows quadratic temperature behavior in the interval Tmin< T<77 K. At high temperature, the electrical resistivity was discussed by the extended Ziman theory. For the whole series of alloys, the composition dependence of the temperature coefficient of electrical resistivity α shows a change in structural short range occurring in the composition range 8-9 at%.

  16. Patterning with metal-oxide EUV photoresist: patterning capability, resist smoothing, trimming, and selective stripping

    Science.gov (United States)

    Mao, Ming; Lazzarino, Frederic; De Schepper, Peter; De Simone, Danilo; Piumi, Daniele; Luong, Vinh; Yamashita, Fumiko; Kocsis, Michael; Kumar, Kaushik

    2017-03-01

    Inpria metal-oxide photoresist (PR) serves as a thin spin-on patternable hard mask for EUV lithography. Compared to traditional organic photoresists, the ultrathin metal-oxide photoresist ( 12nm after development) effectively mitigates pattern collapse. Because of the high etch resistance of the metal-oxide resist, this may open up significant scope for more aggressive etches, new chemistries, and novel integration schemes. We have previously shown that metal-oxide PR can be successfully used to pattern the block layer for the imec 7-nm technology node[1] and advantageously replace a multiple patterning approach, which significantly reduces the process complexity and effectively decreases the cost. We also demonstrated the formation of 16nm half pitch 1:1 line/space with EUV single print[2], which corresponds to a metal 2 layer for the imec 7-nm technology node. In this paper, we investigate the feasibility of using Inpria's metal-oxide PR for 16nm line/space patterning. In meanwhile, we also explore the different etch process for LWR smoothing, resist trimming and resist stripping.

  17. Effect of Anode Pulse-Width on the Microstructure and Wear Resistance of Microarc Oxidation Coatings

    OpenAIRE

    Zhen-Wei Li; Shi-Chun Di

    2017-01-01

    Microarc oxidation (MAO) coatings were prepared on 2024-T4 aluminum alloys using a pulsed bipolar power supply at different anode pulse-widths. After the MAO coatings were formed, the micropores and microcracks on the surface of the MAO coatings were filled with Fluorinated ethylene propylene (FEP) dispersion for preparing MAO self-lubricating composite coatings containing FEP. The effect of the anode pulse-width on the microstructure and wear resistance of the microarc oxidation coatings was...

  18. Scaling Effect on Unipolar and Bipolar Resistive Switching of Metal Oxides

    Science.gov (United States)

    Yanagida, Takeshi; Nagashima, Kazuki; Oka, Keisuke; Kanai, Masaki; Klamchuen, Annop; Park, Bae Ho; Kawai, Tomoji

    2013-01-01

    Electrically driven resistance change in metal oxides opens up an interdisciplinary research field for next-generation non-volatile memory. Resistive switching exhibits an electrical polarity dependent “bipolar-switching” and a polarity independent “unipolar-switching”, however tailoring the electrical polarity has been a challenging issue. Here we demonstrate a scaling effect on the emergence of the electrical polarity by examining the resistive switching behaviors of Pt/oxide/Pt junctions over 8 orders of magnitudes in the areas. We show that the emergence of two electrical polarities can be categorised as a diagram of an electric field and a cell area. This trend is qualitatively common for various oxides including NiOx, CoOx, and TiO2-x. We reveal the intrinsic difference between unipolar switching and bipolar switching on the area dependence, which causes a diversity of an electrical polarity for various resistive switching devices with different geometries. This will provide a foundation for tailoring resistive switching behaviors of metal oxides. PMID:23584551

  19. OXIDATION OF INCONEL 718 IN AIR AT TEMPERATURES FROM 973K TO 1620K.

    Energy Technology Data Exchange (ETDEWEB)

    GREENE,G.A.; FINFROCK,C.C.

    2000-10-01

    As part of the APT project, it was necessary to quantify the release of tungsten from the APT spallation target during postulated accident conditions in order to develop accident source terms for accident consequence characterization. Experiments with tungsten rods at high temperatures in a flowing steam environment characteristic of postulated accidents revealed that considerable vaporization of the tungsten occurred as a result of reactions with the steam and that the aerosols which formed were readily transported away from the tungsten surfaces, thus exposing fresh tungsten to react with more steam. The resulting tungsten release fractions and source terms were undesirable and it was decided to clad the tungsten target with Inconel 718 in order to protect it from contact with steam during an accident and mitigate the accident source term and the consequences. As part of the material selection criteria, experiments were conducted with Inconel 718 at high temperatures to evaluate the rate of oxidation of the proposed clad material over as wide a temperature range as possible, as well as to determine the high-temperature failure limit of the material. Samples of Inconel 718 were inserted into a preheated furnace at temperatures ranging from 973 K to 1620 K and oxidized in air for varying periods of time. After oxidizing in air at a constant temperature for the prescribed time and then being allowed to cool, the samples would be reweighed to determine their weight gain due to the uptake of oxygen. From these weight gain measurements, it was possible to identify three regimes of oxidation for Inconel 718: a low-temperature regime in which the samples became passivated after the initial oxidation, an intermediate-temperature regime in which the rate of oxidation was limited by diffusion and exhibited a constant parabolic rate dependence, and a high-temperature regime in which material deformation and damage accompanied an accelerated oxidation rate above the parabolic

  20. Effect of calcination temperature on formaldehyde oxidation performance of Pt/TiO2 nanofiber composite at room temperature

    Science.gov (United States)

    Xu, Feiyan; Le, Yao; Cheng, Bei; Jiang, Chuanjia

    2017-12-01

    Catalytic oxidation at room temperature over well-designed catalysts is an environmentally friendly method for the abatement of indoor formaldehyde (HCHO) pollution. Herein, nanocomposites of platinum (Pt) and titanium dioxide (TiO2) nanofibers with various phase compositions were prepared by calcining the electrospun TiO2 precursors at different temperatures and subsequently depositing Pt nanoparticles (NPs) on the TiO2 through a NaBH4-reduction process. The phase compositions and structures of Pt/TiO2 can be easily controlled by varying the calcination temperature. The Pt/TiO2 nanocomposites showed a phase-dependent activity towards the catalytic HCHO oxidation. Pt/TiO2 containing pure rutile phase showed enhanced activity with a turnover frequency (TOF) of 16.6 min-1 (for a calcination temperature of 800 °C) as compared to those containing the anatase phase or mixed phases. Density functional theory calculation shows that TiO2 nanofibers with pure rutile phase have stronger adsorption ability to Pt atoms than anatase phase, which favors the reduction of Pt over rutile phase TiO2, leading to higher contents of metallic Pt in the nanocomposite. In addition, the Pt/TiO2 with rutile phase possesses more abundant oxygen vacancies, which is conducive to the activation of adsorbed oxygen. Consequently, the Pt/rutile-TiO2 nanocomposite exhibited better catalytic activity towards HCHO oxidation at room temperature.

  1. [Oxidative stress in adipose tissue as a primary link in pathogenesis of insulin resistance].

    Science.gov (United States)

    Kuzmenko, D I; Udintsev, S N; Klimentyeva, T K; Serebrov, V Yu

    2016-01-01

    Obesity is a leading risk factor of diabetes mellitus type 2, impairments of lipid metabolism and cardiovascular diseases. Dysfunctions of the accumulating weight of the visceral fat are primarily linked to pathogenesis of systemic insulin resistance. The review considers modern views about biochemical mechanisms underlying formation of oxidative stress in adipocytes at obesity, as one of key elements of impairments of their metabolism triggering formation of systemic insulin resistance.

  2. High temperature oxidation of stainless steel AISI316L in air plasma

    Energy Technology Data Exchange (ETDEWEB)

    Vesel, Alenka [EURATOM-MHEST, Jozef Stefan Institute, Jamova 39, 1000 Ljubljana (Slovenia)], E-mail: alenka.vesel@guest.arnes.si; Mozetic, Miran; Drenik, Aleksander [EURATOM-MHEST, Jozef Stefan Institute, Jamova 39, 1000 Ljubljana (Slovenia); Hauptman, Nina [National Institute of Chemistry, Hajdrihova 19, 1000 Ljubljana (Slovenia); Balat-Pichelin, Marianne [CNRS-PROMES, Laboratoire Procedes, Materiaux and Energie Solaire, UPR 8521, 7 rue du four solaire, F-66120 Font Romeu, Odeillo (France)

    2008-12-30

    A study on surface oxidation of AISI316L stainless steel surface was performed. Stainless steel was oxidized in air plasma with a high degree of dissociation of oxygen molecules of about 70%. The resultant flux of oxygen atoms to the surface was about 1 x 10{sup 24} m{sup -2} s{sup -1}. The oxidation was performed at high temperatures ranging up to 1250 K. The oxidation time was 5 min. After oxidation the surface of the samples was analyzed by different methods including Auger electron depth profiling (AES), X-ray photoelectron spectroscopy (XPS), scanning electron spectroscopy (SEM) and X-ray diffraction (XRD). The microstructure and composition of the surface were temperature dependent. In all cases high Cr concentration was observed on the surface after oxidation at a temperature above 600 K. With increasing temperature Mn concentration at the surface increased as well. Below 1000 K the oxide film was uniform, while above 1000 K islands with large spinel particles were observed to appear.

  3. Association of Oxidative Stress and Obesity with Insulin Resistance in Type 2 Diabetes Mellitus.

    Science.gov (United States)

    Das, P; Biswas, S; Mukherjee, S; Bandyopadhyay, S K

    2016-01-01

    Oxidative stress occurs due to delicate imbalance between pro-oxidant and anti oxidant forces in our system. It has been found to be associated with many morbidities but its association with obesity and insulin resistance is still controversial. Here in our study we examined 167 patients of recent onset type 2 diabetes mellitus and 60 age sex matched non-diabetic control. Body Mass Index (BMI), abdominal circumference, fasting blood glucose, serum insulin and plasma Malondealdehyde (MDA, marker for oxidative stress) were measured in them. On the basis of BMI, subjects were divided into obese (BMI≥25) and non obese (BMIobese and non-obese sub groups. Insulin resistance score showed positive correlation with BMI, abdominal circumference, and plasma MDA, strength of association being highest with abdominal circumference. Plasma MDA was found to have positive correlation with physical parameters. Study concludes that, obesity mainly central type may predispose to insulin resistance and oxidative stress may be a crucial factor in its pathogenesis. Thus, oxidative stress may be the connecting link between obesity and type 2 diabetes mellitus, two on going global epidemics.

  4. Oxidation resistance 1 is essential for protection against oxidative stress and participates in the regulation of aging in Caenorhabditis elegans.

    Science.gov (United States)

    Sanada, Y; Asai, S; Ikemoto, A; Moriwaki, T; Nakamura, N; Miyaji, M; Zhang-Akiyama, Q-M

    2014-08-01

    Human oxidation resistance 1 (OXR1) functions in protection against oxidative damage and its homologs are highly conserved in eukaryotes examined so far, but its function still remains uncertain. In this study, we identified a homolog (LMD-3) of human OXR1 in the nematode Caenorhabditis elegans (C. elegans). The expressed LMD-3 was able to suppress the mutator phenotypes of E. coli mutMmutY and mutT mutants. Purified LMD-3 did not have enzymatic activity against 8-oxoG, superoxide dismutase (SOD), or catalase activities. Interestingly, the expression of LMD-3 was able to suppress the methyl viologen or menadione sodium bisulfite-induced expression of soxS and sodA genes in E. coli. The sensitivity of the C. elegans lmd-3 mutant to oxidative and heat stress was markedly higher than that of the wild-type strain N2. These results suggest that LMD-3 protects cells against oxidative stress. Furthermore, we found that the lifespan of the C. elegans lmd-3 mutant was significantly reduced compared with that of the N2, which was resulted from the acceleration of aging. We further examined the effects of deletions in other oxidative defense genes on the properties of the lmd-3 mutant. The deletion of sod-2 and sod-3, which are mitochondrial SODs, extended the lifespan of the lmd-3 mutant. These results indicate that, in cooperation with mitochondrial SODs, LMD-3 contributes to the protection against oxidative stress and aging in C. elegans.

  5. Low temperature self-assembled growth of rutile TiO2/manganese oxide nanocrystalline films

    Science.gov (United States)

    Sun, Zhenya; Zhou, Daokun; Du, Jianhua; Xie, Yuxing

    2017-10-01

    We report formation of rutile TiO2 nanocrystal at low temperature range in the presence of α-MnO2 which self-assembled onto sulfanyl radical activated silicon oxide substrate. SEM, HRTEM, XPS and Raman spectroscopy were used to study the morphology and oxidation state of synthesised crystals. The results showed that when the α-MnO2 was reduced to Mn3O4, it induced the formation of rutile instead of anatase phase in the TiCl4-HCl aqueous system. The finding will promote the understanding of phase transformation mechanism when manganese oxide and titanium oxide co-exist in soil and water environment.

  6. The effect of temperature on the properties of grapheme oxide langmuir films

    Science.gov (United States)

    Seliverstova, E.; Ibrayev, N.; Dzhanabekova, R.; Gladkova, V.

    2017-01-01

    The effect of temperature on the optical properties and structure of graphene oxide langmuir films was studied. It is shown that the decrease of optical density of the films in the absorption band of graphene oxide take place when the film was heated above 100 °C. Increasing the temperature of the films over 200 °C leads to the growth of its optical density. As it was shown with the scanning electron microscopy the structure of grapheme oxide films annealed at different temperatures is practically unchanged. Measured the Raman spectra show that in the films there are a partial reducing of disordered and high-defective graphene oxide LB films occurs under heat treatment. This process accompanied by ordering of amorphous sp3 clusters and its transition in sp2-bonded carbon clusters.

  7. Recent Progress in Nanostructured Oxide TE Materials for Power Generation at High Temperatures

    DEFF Research Database (Denmark)

    Van Nong, Ngo; Pryds, Nini; Linderoth, Søren

    Thermoelectric (TE) materials, which can convert waste heat into electricity, could play an important role in a global sustainable energy solution and environmental problems. Metal oxides have been considered as potential TE materials for power generation that can operate at high temperatures......σT/κ , where S, σ, T and κ are the Seebeck coefficient, electrical conductivity, absolute temperature and thermal conductivity, respectively). We have fabricated high-quality oxide TE materials based on Ca3Co4O9 by optimizing the method for synthesis, modifying the compositions...... and by nanostructuring. This report will focus on the high temperature TE properties of heavy ions doping nanostrcutred Ca3Co4O9 oxides, which exhibit promising ZT, implying suitable polycrystalline oxide TE materials for power generation from waste heat....

  8. Comparison of zircaloy-4 and zirlo by high-temperature oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Ryu, J. R.; Jeong, H.; Park, G. H. [Kyunghee Univ., Yongin (Korea, Republic of); Ryu, T. G. [FNC Technology, Seoul (Korea, Republic of)

    2003-10-01

    An experiment on the oxidation of Zirlo was performed in steam between 850 .deg. C and 1150 .deg. C. Zirlo cladding of the reactor fuel was used for the specimen. Temperature was the range appropriate for LOCA analyses of PWR. Tube-type Zirlo was manufactured as specimens by cutting, grinding, polishing and chemical polishing (etching). After the oxidation experiments, the mass increase of each specimen was measured, and the oxidation layer was observed by an optical microscope. Oxidation layer, and those of {alpha}-phase, {beta}-phase were also observed at the specimens oxidized at high temperatures. The hardness with respect to depth also was measured. It can be compared and verified safty of Zircaloy and Zirlo in LOCA according to the data of experiment.

  9. Low-temperature oxidation effects on the morphological and structural properties of hexagonal Zn nano disks

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, R.; Villa S, G.; Rosales D, J. [Tecnologico de Estudios Superiores de Jocotitlan, Carretera Toluca-Atlacomulco Km 44.8, Jocotitlan, Estado de Mexico (Mexico); Vigueras S, E.; Hernandez L, S. [Universidad Autonoma del Estado de Mexico, Laboratorio de Investigacion y Desarrollo de Materiales Avanzados, Paseo Colon esquina Paseo Tollocan, Toluca, Estado de Mexico (Mexico); Acuna, P. [Universidad Autonoma del Estado de Mexico, Programa de Doctorado en Ciencia de Materiales, Paseo Colon esquina Paseo Tollocan, Toluca, Estado de Mexico (Mexico); Argueta V, A.; Colin B, N., E-mail: lorr810813@gmail.com [Tecnologico de Estudios Superiores de Jocotitlan, Programa de Ingenieria Mecatronica, Carretera Toluca-Atlacomulco Km 44.8, Jocotitlan, Estado de Mexico (Mexico)

    2017-11-01

    Ambient-atmosphere oxidation in the temperature range of 90-450 degrees Celsius was performed over Zn films composed by well-faceted hexagonal nano disks, which were deposited by thermal evaporation. Morphological and structural properties of oxidized Zn nano disks were studied by scanning electron microscopy, transmission electron microscopy, energy dispersive spectroscopy, X-ray diffraction and Raman scattering measurements. It was found that Zn nano disks keep its original shape only when they are annealed at 90 or 150 degrees Celsius. Smooth oxidation occurred only on the rectangular faces of Zn nano disks heated at 150 degrees Celsius. Thermal oxidation at 250 degrees Celsius favored growth of Zn O nano needles over the surface of the Zn nano disks. Hexagonal-shape of Zn nano disks was transformed completely into a complex morphology composed by different shaped particles, with further increase in oxidation temperature to 450 degrees Celsius. (Author)

  10. Novel Electrode Materials for Low-Temperature Solid-Oxide Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    Shaowu Zha; Meilin Liu

    2005-03-23

    Composites electrodes consisting of silver and bismuth vanadates exhibit remarkable catalytic activity for oxygen reduction at 500-550 C and greatly reduce the cathode-electrolyte (doped ceria) resistances of low temperature SOFCs, down to about 0.53 {omega}cm{sup 2} at 500 C and 0.21 {omega}cm{sup 2} at 550 C. The observed power densities of 231, 332, and 443 mWcm-2 at 500, 525 and 550 C, respectively, make it possible to operate SOFCs at temperatures about 500 C. Fuel cell performance depends strongly on the anode microstructure, which is determined by the anode compositions and fabrication conditions. Four types of anodes with two kinds of NiO and GDC powders were investigated. By carefully adjusting the anode microstructure, the GDC electrolyte/anode interfacial polarization resistances reduced dramatically. The interfacial resistance at 600 C decreased from 1.61 {omega} cm{sup 2} for the anodes prepared using commercially available powders to 0.06 {omega} cm{sup 2} for those prepared using powders derived from a glycine-nitrate process. Although steam reforming or partial oxidation is effective in avoiding carbon deposition of hydrocarbon fuels, it increases the operating cost and reduces the energy efficiency. Anode-supported SOFCs with an electrolyte of 20 {micro}m-thick Gd-doped ceria (GDC) were fabricated by co-pressing. A catalyst (1 %wt Pt dispersed on porous Gd-doped ceria) for pre-reforming of propane was developed with relatively low steam to carbon (S/C) ratio ({approx}0.5), coupled with direct utilization of the reformate in low-temperature SOFCs. Propane was converted to smaller molecules during pre-reforming, including H{sub 2}, CH{sub 4}, CO, and CO{sub 2}. A peak power density of 247 mW/cm{sup 2} was observed when pre-reformed propane was directly fed to an SOFC operated at 600 C. No carbon deposition was observed in the fuel cell for a continuous operation of 10 hours at 600 C. The ability of producing vastly different microstructures and

  11. Expression of glyceraldehyde 3-phosphate dehydrogenase is enhanced in Leishmania spp naturally resistant to nitric oxide.

    Science.gov (United States)

    Rios, M C; Silva, W R T; Azevedo, A F; Santos, P L; Teixeira, S A; Muscará, M N; Thomazzi, S M; Almeida, R P; Fernandes, R P M; Scher, R

    2015-06-29

    Leishmania spp are the causative agents of a spectrum of diseases termed leishmaniasis that affect mammals, including humans and dogs. Although reactive nitrogen species are employed in the control of parasitism by the immune system, it is known that Leishmania can withstand this oxidative stress. As the mechanism by which these species are resistant to nitric oxide (NO) is poorly understood, the main objective of this study was to evaluate the expression of glyceraldehyde 3-phosphate dehydrogenase (GAPDH) in Leishmania amazonensis and Leishmania chagasi promastigotes showing natural resistance to NO. GAPDH transcript levels were quantified by real-time polymerase chain reaction amplification, and GAPDH activity (assessed by levels of NADH oxidation) was measured by spectrophotometry. The level of nitration in total protein was assessed by immunoblotting. The results demonstrated an increase in GAPDH expression in resistant isolates of both species compared to susceptible isolates. The increase in GAPDH expression led to an increase in the activity of GAPDH in L. amazonensis human isolates resistant to NO. The pattern of protein nitration did not differ between sensitive and resistant isolates. Our results suggest that changes in expression of GAPDH may be responsible, at least in part, to natural resistance to NO found in human and canine Leishmania spp.

  12. Low-temperature glass bonding for sensor application using boron oxide thin films

    NARCIS (Netherlands)

    Legtenberg, Rob; Legtenberg, R.; Bouwstra, S.; Bouwstra, Siebe; Elwenspoek, Michael Curt

    Low-temperature glass bonding of silicon, silicon dioxide and silicon nitride is described. Boron oxide was used as the intermediate glass layer at a bonding temperature of 450°C. First experiments indicate that due to reflow and deformation of the molten glass layer, bonding over metal patterns is

  13. Investigation of NOx Reduction by Low Temperature Oxidation Using Ozone Produced by Dielectric Barrier Discharge

    DEFF Research Database (Denmark)

    Stamate, Eugen; Irimiea, Cornelia; Salewski, Mirko

    2013-01-01

    NOx reduction by low temperature oxidation using ozone produced by a dielectric barrier discharge generator is investigated for different process parameters in a 6m long reactor in serpentine arrangement using synthetic dry flue gas with NOx levels below 500 ppm, flows up to 50 slm and temperatures...

  14. Temperatures In Compost Landfill Covers As Result Of Methane Oxidation And Compost Respiration

    DEFF Research Database (Denmark)

    Scheutz, Charlotte; Merono, A. R.; Pedersen, Rasmus Broen

    2011-01-01

    This study investigated the influence of the temperature on methane (CH4) oxidation and respiration in compost sampled at a full scale biocover implemented at Klintholm landfill exhibiting high temperatures. Compost material was collected at Klintholm landfill and incubated with and without CH4...

  15. Comparison Of Different Noble Metal Catalysts For The Low Temperature Catalytic Partial Oxidation Of Methane

    Energy Technology Data Exchange (ETDEWEB)

    Rabe, S.; Truong, T.-B.; Vogel, F.

    2005-03-01

    The generation of synthesis gas at low temperatures can contribute to a more economic production of clean transportation fuels (Fischer-Tropsch liquids) from natural gas. In this report, the performance of different noble metal catalysts in a low temperature catalytic partial oxidation process is presented. (author)

  16. Piezoresistive Sensitivity, Linearity and Resistance Time Drift of Polysilicon Nanofilms with Different Deposition Temperatures

    Directory of Open Access Journals (Sweden)

    Changzhi Shi

    2009-02-01

    Full Text Available Our previous research work indicated that highly boron doped polysilicon nanofilms (≤100 nm in thickness have higher gauge factor (the maximum is ~34 for 80 nm-thick films and better temperature stability than common polysilicon films (≥ 200nm in thickness at the same doping levels. Therefore, in order to further analyze the influence of deposition temperature on the film structure and piezoresistance performance, the piezoresistive sensitivity, piezoresistive linearity (PRL and resistance time drift (RTD of 80 nm-thick highly boron doped polysilicon nanofilms (PSNFs with different deposition temperatures were studied here. The tunneling piezoresistive model was established to explain the relationship between the measured gauge factors (GFs and deposition temperature. It was seen that the piezoresistance coefficient (PRC of composite grain boundaries is higher than that of grains and the magnitude of GF is dependent on the resistivity of grain boundary (GB barriers and the weight of the resistivity of composite GBs in the film resistivity. In the investigations on PRL and RTD, the interstitial-vacancy (IV model was established to model GBs as the accumulation of IV pairs. And the recrystallization of metastable IV pairs caused by material deformation or current excitation is considered as the prime reason for piezoresistive nonlinearity (PRNL and RTD. Finally, the optimal deposition temperature for the improvement of film performance and reliability is about 620 °C and the high temperature annealing is not very effective in improving the piezoresistive performance of PSNFs deposited at lower temperatures.

  17. Low-Temperature, Solution-Processed Molybdenum Oxide Hole-Collection Layer for Organic Photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Hammond, S. R.; Meyer, J.; Widjonarko, N. E.; Ndione, P. F.; Sigdel, A. K.; Garcia, A.; Miedaner, A.; Lloyd, M. T.; Kahn, A.; Ginley, D. S.; Berry, J. J.; Olson, D. C.

    2012-02-21

    We have utilized a commercially available metal-organic precursor to develop a new, low-temperature, solution-processed molybdenum oxide (MoO{sub x}) hole-collection layer (HCL) for organic photovoltaic (OPV) devices that is compatible with high-throughput roll-to-roll manufacturing. Thermogravimetric analysis indicates complete decomposition of the metal-organic precursor by 115 C in air. Acetonitrile solutions spin-cast in a N{sub 2} atmosphere and annealed in air yield continuous thin films of MoO{sub x}. Ultraviolet, inverse, and X-ray photoemission spectroscopies confirm the formation of MoO{sub x} and, along with Kelvin probe measurements, provide detailed information about the energetics of the MoO{sub x} thin films. Incorporation of these films into conventional architecture bulk heterojunction OPV devices with poly(3-hexylthiophene) and [6,6]-phenyl-C{sub 61} butyric acid methyl ester afford comparable power conversion efficiencies to those obtained with the industry-standard material for hole injection and collection: poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS). The MoO{sub x} HCL devices exhibit slightly reduced open circuit voltages and short circuit current densities with respect to the PEDOT:PSS HCL devices, likely due in part to charge recombination at Mo{sup 5+} gap states in the MoO{sub x} HCL, and demonstrate enhanced fill factors due to reduced series resistance in the MoO{sub x} HCL.

  18. Low-Temperature UV-Assisted Fabrication of Metal Oxide Thin Film Transistor

    Science.gov (United States)

    Zhu, Shuanglin

    Solution processed metal oxide semiconductors have attracted intensive attention in the last several decades and have emerged as a promising candidate for the application of thin film transistor (TFT) due to their nature of transparency, flexibility, high mobility, simple processing technique and potential low manufacturing cost. However, metal oxide thin film fabricated by solution process usually requires a high temperature (over 300 °C), which is above the glass transition temperature of some conventional polymer substrates. In order to fabricate the flexible electronic device on polymer substrates, it is necessary to find a facile approach to lower the fabrication temperature and minimize defects in metal oxide thin film. In this thesis, the electrical properties dependency on temperature is discussed and an UV-assisted annealing method incorporating Deep ultraviolet (DUV)-decomposable additives is demonstrated, which can effectively improve electrical properties solution processed metal oxide semiconductors processed at temperature as low as 220 °C. By studying a widely used indium oxide (In2O3) TFT as a model system, it is worth noted that compared with the sample without UV treatment, the linear mobility and saturation mobility of UV-annealing sample are improved by 56% and 40% respectively. Meanwhile, the subthreshold swing is decreased by 32%, indicating UV-treated device could turn on and off more efficiently. In addition to pure In2O3 film, the similar phenomena have also been observed in indium oxide based Indium-Gallium-Zinc Oxide (IGZO) system. These finding presented in this thesis suggest that the UV assisted annealing process open a new route to fabricate high performance metal oxide semiconductors under low temperatures.

  19. Low-temperature CO oxidation on Co(0 0 0 1)

    Science.gov (United States)

    Wu, Jiawei; Chen, Jun; Guo, Qing; Dai, Dongxu; Yang, Xueming

    2017-09-01

    Low-temperature oxidation of CO, perhaps the most extensively studied reaction in the history of heterogeneous catalysis, is becoming increasingly important in the context of cleaning air and lowering automotive emissions. Here, we have studied low-temperature CO oxidation on Co(0 0 0 1) using temperature programed desorption method. We show that chemisorbed O adlayer on Co(0 0 0 1) does not promote CO2 formation. However, when a Co3O4-like surface is formed at 90 K, large amount of CO2 is produced at 90 K in the presence of weakly bound oxygen species, demonstrating that low-temperature CO oxidation can be rationalized on O2-saturated Co3O4-like oxide surfaces. However, the formation of carbonate species via the CO2 product and weakly bound oxygen species reduces the yield of low temperature CO2. Thus, how to block the formation of carbonate plays a key role in enhancing the low-temperature CO2 production on the Co3O4-like oxide surfaces.

  20. The evolution of titanium oxidation at elevated temperature and its oxide scale morphology

    Science.gov (United States)

    Imbrie, Peter Kenneth

    The purpose of this study was to experimentally quantify the multi-dimensional growth characteristics of the oxide scale formed on commercially pure titanium at 700°C in a flowing air environment. The geometries considered herein had characteristic dimensions that were appropriately sized to match the thickness of the oxide scale and were fabricated into shapes of solid and hollow cylinders and external and internal wedges. Scanning electron microscopy (SEM) image analysis was used to measure the oxide layer thickness and the Pilling-Bedworth ratio (PBR) as a function of time. An effective diffusion coefficient was determined from one-dimensional planar oxide thickness data and experimentally obtained PBR values served as the necessary input to a solid state diffusion model, which was modified to account for the volumetric expansion of the oxide. Oxidation of the solid cylinder and external wedge geometries were shown to develop a scale morphology similar to that observed on a flat specimen. The oxide had two notable features: (1) at the air-oxide interface, the oxide appeared to be compact and its thickness grew with time and (2) from the metal-oxide interface up to the compact scale, the oxide was found to have a porous-layered arrangement with the pore size being a function of distance from the metal-oxide interface. Conversely, the oxide scale growth on the hollow cylinders and external wedges, while still layered, appeared to be much less porous and had considerably less cracking and spalling damage. The modified solid-state diffusion model and experimentally obtained values of the diffusion coefficient and PBR were used to demonstrate the competing influences of oxide expansion and curvature effects. In addition, the predictive capability of the model, for the case of a solid cylinder, was shown to under predict experimental results, whereas scale growth on the inner surface of a hollow cylinder was over predicted. The differences are primarily attributed to

  1. Room temperature ferromagnetic and semiconducting properties of graphene adsorbed with cobalt oxide using electrochemical method

    Science.gov (United States)

    Park, Chang-Soo; Lee, Kyung Su; Chu, Dongil; Lee, Juwon; Shon, Yoon; Kim, Eun Kyu

    2017-12-01

    We report the room temperature ferromagnetic properties of graphene adsorbed by cobalt oxide using electrochemical method. The cobalt oxide doping onto graphene was carried out in 0.1 M LiCoO2/DI-water solution. The doped graphene thin film was determined to be a single layer from Raman analysis. The CoO doped graphene has a clear ferromagnetic hysteresis at room temperature and showed a remnant magnetization, 128.2 emu/cm3. The temperature dependent conductivity of the adsorbed graphene showed the semiconducting behavior and a band gap opening of 0.12 eV.

  2. Effect of Contact Pressure on the Resistance Contact Value and Temperature Changes in Copper Busbar Connection

    Directory of Open Access Journals (Sweden)

    Agus Risdiyanto

    2012-12-01

    Full Text Available This paper discussed the influence of tightness or contacts pressure on copper busbar joints to determine changes in the value of the initial contact resistance and the maximum temperature at the joint due to high current load. The test sample was copper busbar 3 x 30 mm with configuration of bolted overlapping joint. Increasing contact pressure at the joint was measured to find out its effect on the value of contact resistance. The applied pressure was 6 to 36 MPa. Procedure of contact resistance measurement refer to the ASTM B539 standard using four-wire method. The sample subsequently loaded with the current of 350 A for 60 minutes and the maximum temperature at the joint was measured. The result showed that increasing contact pressure at the busbar joint will reduce the contact resistance and maximum temperature. The increase of contact pressure from 6 to 30 MPa causes decreasing contact resistance from 16 μΩ to 11 μΩ. Further increasing of contact pressure more than 30 MPa did not affect the contact resistance significantly. The lowest temperatur of busbar joint of 54°C was reached at a contact pressure of 36 Mpa.

  3. Resistive wall wakefields of short bunches at cryogenic temperatures

    Directory of Open Access Journals (Sweden)

    G. Stupakov

    2015-03-01

    Full Text Available We present calculations of the longitudinal wakefields at cryogenic temperatures for extremely short bunches, characteristic for modern x-ray free electron lasers. The calculations are based on the equations for the surface impedance in the regime of the anomalous skin effect in metals. This paper extends and complements an earlier analysis of B. Podobedov, Phys. Rev. ST Accel. Beams 12, 044401 (2009. into the region of very high frequencies associated with bunch lengths in the micron range. We study in detail the case of a rectangular bunch distribution for parameters of interest of LCLS-II with a superconducting undulator.

  4. Effect of hydrogen on the integrity of aluminium–oxide interface at elevated temperatures

    KAUST Repository

    Li, Meng

    2017-02-20

    Hydrogen can facilitate the detachment of protective oxide layer off metals and alloys. The degradation is usually exacerbated at elevated temperatures in many industrial applications; however, its origin remains poorly understood. Here by heating hydrogenated aluminium inside an environmental transmission electron microscope, we show that hydrogen exposure of just a few minutes can greatly degrade the high temperature integrity of metal–oxide interface. Moreover, there exists a critical temperature of ∼150 °C, above which the growth of cavities at the metal–oxide interface reverses to shrinkage, followed by the formation of a few giant cavities. Vacancy supersaturation, activation of a long-range diffusion pathway along the detached interface and the dissociation of hydrogen-vacancy complexes are critical factors affecting this behaviour. These results enrich the understanding of hydrogen-induced interfacial failure at elevated temperatures.

  5. Investigation of the synaptic device based on the resistive switching behavior in hafnium oxide

    Directory of Open Access Journals (Sweden)

    Bin Gao

    2015-02-01

    Full Text Available Metal-oxide based electronics synapse is promising for future neuromorphic computation application due to its simple structure and fab-friendly materials. HfOx resistive switching memory has been demonstrated superior performance such as high speed, low voltage, robust reliability, excellent repeatability, and so on. In this work, the HfOx synaptic device was investigated based on its resistive switching phenomenon. HfOx resistive switching device with different electrodes and dopants were fabricated. TiN/Gd:HfOx/Pt stack exhibited the best synaptic performance, including controllable multilevel ability and low training energy consumption. The training schemes for memory and forgetting were developed.

  6. Effect of HDL composition and particle size on the resistance of HDL to the oxidation

    Science.gov (United States)

    2010-01-01

    Objectives To study the resistance of HDL particles to direct oxidation in respect to the distribution of HDL particles. Design and Methods We studied HDL composition, subclass distribution, and the kinetics of CuSO4-induced oxidation of total HDL and HDL3 in vitro in 36 low-HDL-C subjects and in 41 control subjects with normal HDL-C. Results The resistance of HDL3 to oxidation, as assessed from the propagation rate was significantly higher than that of total HDL. The propagation rate and diene formation during HDL oxidation in vitro was attenuated in HDL derived from low-HDL-C subjects. Propagation rate and maximal diene formation during total HDL oxidation correlated significantly with HDL mean particle size. The propagation rate of total HDL oxidation in vitro displayed a significant positive association with HDL2 particle mass and HDL mean particle size by multiple regression analyses. Conclusions These observations highlight that the distribution of HDL subpopulations has important implications for the potential of HDL as an anti-oxidant source. PMID:20863394

  7. Model analysis of temperature dependence of abnormal resistivity of a multiwalled carbon nanotube interconnection

    Directory of Open Access Journals (Sweden)

    Yi-Chen Yeh

    2010-07-01

    Full Text Available Yi-Chen Yeh1, Lun-Wei Chang2, Hsin-Yuan Miao3, Szu-Po Chen1, Jhu-Tzang Lue11Department of Physics and 2Institute of Electronics Engineering, National Tsing Hua University, Hsinchu, Taiwan; 3Department of Electrical Engineering, Tunghai University, Taichung, TaiwanAbstract: A homemade microwave plasma-enhanced chemical vapor deposition method was used to grow a multiwalled carbon nanotube between two nickel catalyst electrodes. To investigate the transport properties and electron scattering mechanism of this interconnection (of approximately fixed length and fixed diameter, we carried out a model analysis of temperature dependence of resistivity. To explain the abnormal behavior of the negative temperature coefficient of resistivity in our experimental results, we then employed theories, such as hopping conductivity theory and variable range hopping conductivity theory, to describe resistivity in the high- and low-temperature ranges, respectively. Further, the grain boundary scattering model is also provided to fit the entire measured curve of temperature dependence of resistivity.Keywords: multiwalled carbon nanotube, resistivity, hopping conductivity, temperature dependence

  8. The Pre-Onset, Transitional, and Foot Regions in Resistance Versus Temperature Behavior in High-T sub 2 Cuprates: Inferences Regarding Maximum T sub 2

    Science.gov (United States)

    1992-09-01

    linearity region, the transitional regime, and the foot region in the resistance versus temperature behavior of high-Tc oxide superconductors ... superconductor Tl1Ca 1Ba2 Cu207.6 to show commonality of pyramidal building blocks, and also to the well known A2 BX4 related archetype. The structure...The material shows strong levitation , high density, very low porosity, large grain size, and very high electrical conductivity in the normal state. In

  9. Species and temperature measurements of methane oxidation in a nanosecond repetitively pulsed discharge

    OpenAIRE

    Lefkowitz, Joseph K; Guo, Peng; Rousso, Aric; Ju, Yiguang

    2015-01-01

    Speciation and temperature measurements of methane oxidation during a nanosecond repetitively pulsed discharge in a low-temperature flow reactor have been performed. Measurements of temperature and formaldehyde during a burst of pulses were made on a time-dependent basis using tunable diode laser absorption spectroscopy, and measurements of all other major stable species were made downstream of a continuously pulsed discharge using gas chromatography. The major species for a stoichiometric me...

  10. Bio-lubricants derived from waste cooking oil with improved oxidation stability and low-temperature properties.

    Science.gov (United States)

    Li, Weimin; Wang, Xiaobo

    2015-01-01

    Waste cooking oil (WCO) was chemically modified via epoxidation using H2O2 followed by transesterification with methanol and branched alcohols (isooctanol, isotridecanol and isooctadecanol) to produce bio-lubricants with improved oxidative stability and low temperature properties. Physicochemical properties of synthesized bio-lubricants such as pour point (PP), cloud point (CP), viscosity, viscosity index (VI), oxidative stability, and corrosion resistant property were determined according to standard methods. The synthesized bio-lubricants showed improved low temperature flow performances compared with WCO, which can be attributing to the introduction of branched chains in their molecular structures. What's more, the oxidation stability of the WCO showed more than 10 folds improvement due to the elimination of -C=C-bonds in the WCO molecule. Tribological performances of these bio-lubricants were also investigated using four-ball friction and wear tester. Experimental results showed that derivatives of WCO exhibited favorable physicochemical properties and tribological performances which making them good candidates in formulating eco-friendly lubricants.

  11. Design, Qualification and Integration Testing of the High-Temperature Resistance Temperature Device for Stirling Power System

    Science.gov (United States)

    Chan, Jack; Hill, Dennis H.; Elisii, Remo; White, Jonathan R.; Lewandowski, Edward J.; Oriti, Salvatore M.

    2015-01-01

    The Advanced Stirling Radioisotope Generator (ASRG), developed from 2006 to 2013 under the joint sponsorship of the United States Department of Energy (DOE) and National Aeronautics and Space Administration (NASA) to provide a high-efficiency power system for future deep space missions, employed Sunpower Incorporated's Advanced Stirling Convertors (ASCs) with operating temperature up to 840 C. High-temperature operation was made possible by advanced heater head materials developed to increase reliability and thermal-to-mechanical conversion efficiency. During a mission, it is desirable to monitor the Stirling hot-end temperature as a measure of convertor health status and assist in making appropriate operating parameter adjustments to maintain the desired hot-end temperature as the radioisotope fuel decays. To facilitate these operations, a Resistance Temperature Device (RTD) that is capable of high-temperature, continuous long-life service was designed, developed and qualified for use in the ASRG. A thermal bridge was also implemented to reduce the RTD temperature exposure while still allowing an accurate projection of the ASC hot-end temperature. NASA integrated two flight-design RTDs on the ASCs and assembled into the high-fidelity Engineering Unit, the ASRG EU2, at Glenn Research Center (GRC) for extended operation and system characterization. This paper presents the design implementation and qualification of the RTD, and its performance characteristics and calibration in the ASRG EU2 testing.

  12. SSZ-13-supported manganese oxide catalysts for low temperature ...

    Indian Academy of Sciences (India)

    YONGZHOU YE

    demonstrated that the loading of SSZ-13 type molecular sieves with Mn compounds can be expected to extend the low temperature threshold of SCR activity. In the present study, a family of Mn/SSZ-13 cat- alysts with varying Mn loading was prepared by the co-precipitation method. The SCR activities were eval- uated, and ...

  13. SSZ-13-supported manganese oxide catalysts for low temperature ...

    Indian Academy of Sciences (India)

    A series of Mn/SSZ-13 catalysts of varying Mn content were synthesized by hydrothermal and co-precipitation methods. Their performances for the selective catalytic reduction (SCR) of NOx with NH₃ were evaluated. The results indicate that over 95% NOx conversion was achieved at a low temperature of 150◦C with an Mn ...

  14. Transient analysis of nuclear graphite oxidation for high temperature gas cooled reactor

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Wei, E-mail: wxu12@mails.tsinghua.edu.cn; Shi, Lei; Zheng, Yanhua

    2016-09-15

    Graphite is widely used as moderator, reflector and structural materials in the high temperature gas-cooled reactor pebble-bed modular (HTR-PM). In normal operating conditions or water/air ingress accident, the nuclear graphite in the reactor may be oxidized by air or steam. Oxidation behavior of nuclear graphite IG-110 which is used as the structural materials and reflector of HTR-PM is mainly researched in this paper. To investigate the penetration depth of oxygen in IG-110, this paper developed the one dimensional spherical oxidation model. In the oxidation model, the equations considered graphite porosity variation with the graphite weight loss. The effect of weight loss on the effective diffusion coefficient and the oxidation rate was also considered in this model. Based on this theoretical model, this paper obtained the relative concentration and local weight loss ratio profile in graphite. In addition, the local effective diffusion coefficient and oxidation rate in the graphite were also investigated.

  15. High temperature induces apoptosis and oxidative stress in pufferfish (Takifugu obscurus) blood cells.

    Science.gov (United States)

    Cheng, Chang-Hong; Yang, Fang-Fang; Liao, Shao-An; Miao, Yu-Tao; Ye, Chao-Xia; Wang, An-Li; Tan, Jia-Wen; Chen, Xiao-Yan

    2015-10-01

    Water temperature is an important environmental factor in aquaculture farming that affects the survival and growth of organisms. The change in culture water temperature may not only modify various chemical and biological processes but also affect the status of fish populations. In previous studies, high temperature induced apoptosis and oxidative stress. However, the precise mechanism and the pathways that are activated in fish are still unclear. In the present study, we investigated the effects of high temperature (34°C) on the induction of apoptosis and oxidative stress in pufferfish (Takifugu obscurus) blood cells. The data showed that high temperature exposure increased oxygen species (ROS), cytoplasmic free-Ca(2+) concentration and cell apoptosis. To test the apoptotic pathway, the expression pattern of some key apoptotic related genes including P53, Bax, caspase 9 and caspase 3 were examined. The results showed that acute high temperature stress induced up-regulation of these genes, suggesting that the p53-Bax pathway and the caspase-dependent apoptotic pathway could be involved in apoptosis induced by high temperature stress. Furthermore, the gene expression of antioxidant enzymes (Cu/Zn-SOD, Mn-SOD, CAT, GPx, and GR) and heat shock proteins (HSP90 and HSP70) in the blood cells were induced by high temperature stress. Taken together, our results showed that high temperature-induced oxidative stress may cause pufferfish blood cells apoptosis, and cooperatively activated p53-Bax and caspase-dependent apoptotic pathway. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Use of thermogravimetry and thermodynamic calculations for specifying chromium diffusion occurring in alloys containing chromium carbides during high temperature oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Berthod, Patrice, E-mail: Patrice.Berthod@univ-lorraine.fr; Conrath, Elodie

    2015-09-01

    The chromium diffusion is of great importance for the high temperature oxidation behaviour of the chromium-rich carbides-strengthened superalloys. These ones contain high chromium quantities for allowing them well resisting hot corrosion by constituting and maintaining a continuous external scale of chromia. Knowing how chromium can diffuse in such alloys is thus very useful for predicting the sustainability of their chromia-forming behaviour. Since Cr diffusion occurs through the external part of the alloy already affected by the previous steps of oxidation (decarburized subsurface) it is more judicious to specify this diffusion during the oxidation process itself. This was successfully carried out in this work in the case of a model chromia-forming nickel-based alloy containing chromium carbides, Ni(bal.)–25Cr–0.5C (in wt.%). This was done by specifying, using real-time thermogravimetry, the mass gain kinetic due to oxidation, and by combining it with the post-mortem determination of the Cr concentration profiles in subsurface. The values of D{sub Cr} thus obtained for 1000, 1050 and 1100 °C in the alloy subsurface are consistent with the values obtained in earlier works for similar alloy's chemical compositions. - Highlights: • A Ni25Cr0.50C alloy was oxidized at high temperature in a thermo-balance. • The mass gain files were analysed to specify the Cr{sub 2}O{sub 3} volatilization constant K{sub v}. • Concentration profiles were acquired to specify the chromium gradient. • The diffusion coefficient of chromium through the subsurface was deduced. • The obtained diffusion coefficient is consistent with values previously obtained.

  17. Differential response of DDT susceptible and resistant Drosophila melanogaster strains to DDT and oxidative stress

    Science.gov (United States)

    Metabolic DDT resistance in Drosophila melanogaster is associated with increased cytochrome P450 expression. Increased P450 activity is also associated with increased oxidative stress. In contrast, increased glutathione S transferase (GST) expression has been associated with a greater ability of o...

  18. Migration of interfacial oxygen ions modulated resistive switching in oxide-based memory devices

    Science.gov (United States)

    Chen, C.; Gao, S.; Zeng, F.; Tang, G. S.; Li, S. Z.; Song, C.; Fu, H. D.; Pan, F.

    2013-07-01

    Oxides-based resistive switching memory induced by oxygen ions migration is attractive for future nonvolatile memories. Numerous works had focused their attentions on the sandwiched oxide materials for depressing the characteristic variations, but the comprehensive studies of the dependence of electrodes on the migration behavior of oxygen ions are overshadowed. Here, we investigated the interaction of various metals (Ni, Co, Al, Ti, Zr, and Hf) with oxygen atoms at the metal/Ta2O5 interface under electric stress and explored the effect of top electrode on the characteristic variations of Ta2O5-based memory device. It is demonstrated that chemically inert electrodes (Ni and Co) lead to the scattering switching characteristics and destructive gas bubbles, while the highly chemically active metals (Hf and Zr) formed a thick and dense interfacial intermediate oxide layer at the metal/Ta2O5 interface, which also degraded the resistive switching behavior. The relatively chemically active metals (Al and Ti) can absorb oxygen ions from the Ta2O5 film and avoid forming the problematic interfacial layer, which is benefit to the formation of oxygen vacancies composed conduction filaments in Ta2O5 film thus exhibit the minimum variations of switching characteristics. The clarification of oxygen ions migration behavior at the interface can lead further optimization of resistive switching performance in Ta2O5-based memory device and guide the rule of electrode selection for other oxide-based resistive switching memories.

  19. Effects of fish oil on oxidation resistance of VLDL in hypertriglyceridemic patients

    NARCIS (Netherlands)

    Hau, M.-F.; Smelt, A.H.M.; Bindels, A.J.G.H.; Sijbrands, E.J.G.; Laarse, A. van der; Onkenhout, W.; Duyvenvoorde, W. van; Princen, H.M.G.

    1996-01-01

    In hypertriglyceridemic (HTG) patients the addition of fish oil to the diet causes a marked reduction in the concentration of triglyceride-rich lipoproteins in the serum. To investigate the effects of fish oil on the oxidation resistance of VLDL and LDL in HTG patients, nine male patients received 1

  20. The impact of temperature loading on massive concrete block resistance

    Science.gov (United States)

    Beran, Pavel; Kočí, Jan

    2017-07-01

    Very large and massive concrete blocks with thickness in interval 3.5 - 6 meters are often designed in cement industry. These massive blocks have high heat inertial and thus the thermal stress due to nonlinear temperature gradient in concrete block may occur. The coupled thermo-mechanical analysis of concrete block in Prague Czech Republic and Sterlitamak Russia was made. By the numerical model of concrete block was analyzed the typical year (called reference year) in particular localities. The results show that in concrete block the thermal stresses which are higher than the tensile strength of concrete originate. Therefore, the concrete block should be reinforced by steel rods. The values of stresses are markedly affected by climate. The significantly higher values of thermal stresses were detected in Sterlitamak than in Prague.

  1. Effect of temperature on the adsorption of sulfanilamide onto aluminum oxide and its molecular dynamics simulations

    Science.gov (United States)

    Ji, Ying-xue; Wang, Feng-he; Duan, Lun-chao; Zhang, Fan; Gong, Xue-dong

    2013-11-01

    The effect of temperature on the adsorption of sulfanilamide (SA) onto aluminum oxide was researched through batch adsorption experiments, and was then simulated using the molecular dynamics (MD) method. The results show that SA can be adsorbed effectively by the adsorbent of aluminum oxide due to their interactions between SA molecule and the surface of aluminum oxide crystal, and temperature is a key factor which influences the adsorption efficiency obviously. The removal ratio of SA at 298 K is the highest among the selected temperatures (293 K, 298 K, 303 K). MD simulations revealed the interactions between SA molecules and (0 1 2) surface of aluminum oxide crystal at molecular level. The SA molecule has clung to the (0 1 2) face of aluminum oxide crystal, and its structure is deformed during its combining process with the surface. Both binding energies (Eb) and deformation energies (ΔEdeform) in the SA-aluminum oxide system follow the same order as: SA-Al2O3 (298 K) > SA-Al2O3 (293 K) > SA-Al2O3 (303 K). Their deformation energies are far less than their non-bonding energies. Analysis of radial distribution functions (RDFs) indicates that SA can be adsorbed effectively by aluminum oxide crystal mainly through non-bond interactions. The simulation results agree well with the experimental results, which verify the rationality and reliability of the MD simulation. The further MD simulations provide theoretically optimal temperature (301 K) for the adsorption of SA onto aluminum oxide. The molecular dynamics simulation will be useful for better understanding the adsorption mechanism of antibiotics onto metal oxides, which will also be helpful for optimizing experimental conditions to improve the adsorptive removal efficiency of antibiotics.

  2. Enhanced High Temperature Corrosion Resistance in Advanced Fossil Energy Systems by Nano-Passive Layer Formation

    Energy Technology Data Exchange (ETDEWEB)

    Arnold R. Marder

    2007-06-14

    Due to their excellent corrosion resistance, iron aluminum alloys are currently being considered for use as weld claddings in fossil fuel fired power plants. The susceptibility to hydrogen cracking of these alloys at higher aluminum concentrations has highlighted the need for research into the effect of chromium additions on the corrosion resistance of lower aluminum alloys. In the present work, three iron aluminum alloys were exposed to simulated coal combustion environments at 500 C and 700 C for both short (100 hours) and long (5,000 hours) isothermal durations. Scanning electron microscopy was used to analyze the corrosion products. All alloys exhibited excellent corrosion resistance in the short term tests. For longer exposures, increasing the aluminum concentration was beneficial to the corrosion resistance. The addition of chromium to the binary iron aluminum alloy prevented the formation iron sulfide and resulted in lower corrosion kinetics. A classification of the corrosion products that developed on these alloys is presented. Scanning transmission electron microscopy (STEM) of the as-corroded coupons revealed that chromium was able to form chromium sulfides only on the higher aluminum alloy, thereby preventing the formation of deleterious iron sulfides. When the aluminum concentration was too low to permit selective oxidation of only aluminum (upon initial exposure to the corrosion environment), the formation of chromium oxide alongside the aluminum oxide led to depletion of chromium beneath the oxide layer. Upon penetration of sulfur through the oxide into this depletion layer, iron sulfides (rather than chromium sulfides) were found to form on the low aluminum alloy. Thus, it was found in this work that the role of chromium on alloy corrosion resistance was strongly effected by the aluminum concentration of the alloy. STEM analysis also revealed the encapsulation of external iron sulfide products with a thin layer of aluminum oxide, which may provide a

  3. Effect of Myricetin, Pyrogallol, and Phloroglucinol on Yeast Resistance to Oxidative Stress

    Directory of Open Access Journals (Sweden)

    Vanda Mendes

    2015-01-01

    Full Text Available The health beneficial effects of dietary polyphenols have been attributed to their intrinsic antioxidant activity, which depends on the structure of the compound and number of hydroxyl groups. In this study, the protective effects of pyrogallol, phloroglucinol, and myricetin on the yeast Saccharomyces cerevisiae were investigated. Pyrogallol and myricetin, which have a pyrogallol structure in the B ring, increased H2O2 resistance associated with a reduction in intracellular oxidation and protein carbonylation, whereas phloroglucinol did not exert protective effects. The acquisition of oxidative stress resistance in cells pretreated with pyrogallol and myricetin was not associated with an induction of endogenous antioxidant defences as assessed by the analysis of superoxide dismutase and catalase activities. However, myricetin, which provided greater stress resistance, prevented H2O2-induced glutathione oxidation. Moreover, myricetin increased the chronological lifespan of yeast lacking the mitochondrial superoxide dismutase (Sod2p, which exhibited a premature aging phenotype and oxidative stress sensitivity. These findings show that the presence of hydroxyl groups in the ortho position of the B ring in pyrogallol and myricetin contributes to the antioxidant protection afforded by these compounds. In addition, myricetin may alleviate aging-induced oxidative stress, particularly when redox homeostasis is compromised due to downregulation of endogenous defences present in mitochondria.

  4. Effects of temperature on the heterogeneous oxidation of sulfur dioxide by ozone on calcium carbonate

    Directory of Open Access Journals (Sweden)

    L. Y. Wu

    2011-07-01

    Full Text Available The heterogeneous oxidation of sulfur dioxide by ozone on CaCO3 was studied as a function of temperature (230 to 298 K at ambient pressure. Oxidation reactions were followed in real time using diffuse reflectance infrared Fourier transform spectrometry (DRIFTS to obtain kinetic and mechanistic data. From the analysis of the spectral features, the formation of sulfate was identified on the surface in the presence of O3 and SO2 at different temperatures from 230 to 298 K. The results showed that the heterogeneous oxidation and the rate of sulfate formation were sensitive to temperature. An interesting stage-transition region was observed at temperatures ranging from 230 to 257 K, but it became ambiguous gradually above 257 K. The reactive uptake coefficients at different temperatures from 230 to 298 K were acquired for the first time, which can be used directly in atmospheric chemistry modeling studies to predict the formation of secondary sulfate aerosol in the troposphere. Furthermore, the rate of sulfate formation had a turning point at about 250 K. The sulfate concentration at 250 K was about twice as large as that at 298 K. The rate of sulfate formation increased with decreasing temperature at temperatures above 250 K, while there is a contrary temperature effect at temperatures below 250 K. The activation energy for heterogeneous oxidation at temperatures from 245 K to 230 K was determined to be 14.63 ± 0.20 kJ mol−1. A mechanism for the temperature dependence was proposed and the atmospheric implications were discussed.

  5. Autotrophic growth of bacterial and archaeal ammonia oxidizers in freshwater sediment microcosms incubated at different temperatures.

    Science.gov (United States)

    Wu, Yucheng; Ke, Xiubin; Hernández, Marcela; Wang, Baozhan; Dumont, Marc G; Jia, Zhongjun; Conrad, Ralf

    2013-05-01

    Both bacteria and archaea potentially contribute to ammonia oxidation, but their roles in freshwater sediments are still poorly understood. Seasonal differences in the relative activities of these groups might exist, since cultivated archaeal ammonia oxidizers have higher temperature optima than their bacterial counterparts. In this study, sediment collected from eutrophic freshwater Lake Taihu (China) was incubated at different temperatures (4°C, 15°C, 25°C, and 37°C) for up to 8 weeks. We examined the active bacterial and archaeal ammonia oxidizers in these sediment microcosms by using combined stable isotope probing (SIP) and molecular community analysis. The results showed that accumulation of nitrate in microcosms correlated negatively with temperature, although ammonium depletion was the same, which might have been related to enhanced activity of other nitrogen transformation processes. Incubation at different temperatures significantly changed the microbial community composition, as revealed by 454 pyrosequencing targeting bacterial 16S rRNA genes. After 8 weeks of incubation, [(13)C]bicarbonate labeling of bacterial amoA genes, which encode the ammonia monooxygenase subunit A, and an observed increase in copy numbers indicated the activity of ammonia-oxidizing bacteria in all microcosms. Nitrosomonas sp. strain Is79A3 and Nitrosomonas communis lineages dominated the heavy fraction of CsCl gradients at low and high temperatures, respectively, indicating a niche differentiation of active bacterial ammonia oxidizers along the temperature gradient. The (13)C labeling of ammonia-oxidizing archaea in microcosms incubated at 4 to 25°C was minor. In contrast, significant (13)C labeling of Nitrososphaera-like archaea and changes in the abundance and composition of archaeal amoA genes were observed at 37°C, implicating autotrophic growth of ammonia-oxidizing archaea under warmer conditions.

  6. Temperature Dependent Variations of Phonon Interactions in Nanocrystalline Cerium Oxide

    Directory of Open Access Journals (Sweden)

    Sugandha Dogra Pandey

    2015-01-01

    Full Text Available The temperature dependent anharmonic behavior of the phonon modes of nanocrystalline CeO2 was investigated in the temperature range of 80–440 K. The anharmonic constants have been derived from the shift in phonon modes fitted to account for the anharmonic contributions as well as the thermal expansion contribution using the high pressure parameters derived from our own high pressure experimental data reported previously. The total anharmonicity has also been estimated from the true anharmonicity as well as quasiharmonic component. In the line-width variation analysis, the cubic anharmonic term was found to dominate the quartic term. Finally, the phonon lifetime also reflected the trend so observed.

  7. Low-temperature capacitive sensor based on perovskite oxides

    Science.gov (United States)

    Zaza, F.; Orio, G.; Serra, E.; Caprioli, F.; Pasquali, M.

    2015-06-01

    Energy, environmental and social issues drive towards the green political economy and the development of advanced technologies, promoting renewable energy sources, improving energy conversion efficiency and reducing exhaust gas emissions. The development of sustainable technologies requires strategic research in the area of gas sensors for monitoring air quality, controlling gas emissions and optimizing combustion processes. Solid state sensors are the most attractive one because of their simplicity in function, small size and low cost. The aim of this work is to synthetize and characterize strontium titanate and test its sensing performance. The prepared sensor device shows significant sensitivity and response rate at room-temperature. However, because of the low recovery rate, the regeneration of the sensor has to be made at high temperature for promoting the decomposition of the carbonates formed on the perovkite surface.

  8. An evolutionary comparative scan for longevity-related oxidative stress resistance mechanisms in homeotherms.

    Science.gov (United States)

    Pamplona, Reinald; Barja, Gustavo

    2011-10-01

    Key mechanisms relating oxidative stress to longevity from an interespecies comparative approach are reviewed. Long-lived animal species show low rates of reactive oxygen species (ROS) generation and oxidative damage at their mitochondria. Comparative physiology also shows that the specific compositional pattern of tissue macromolecules (proteins, lipids and nucleic acids) in long-lived animal species gives them an intrinsically high resistance to modification that likely contributes to their superior longevity. This is obtained in the case of lipids by decreasing the degree of fatty acid unsaturation, and in the case of proteins by lowering their methionine content. These findings are also substantiated from a phylogenomic approach. Nutritional or/and pharmacological interventions focused to modify some of these molecular traits were translated with modifications in animal longevity. It is proposed that natural selection tends to decrease the mitochondrial ROS generation and to increase the molecular resistance to the oxidative damage in long-lived species.

  9. Effect of nano-oxide particle size on radiation resistance of iron–chromium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Weizong; Li, Lulu [Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695 (United States); Valdez, James A. [Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Saber, Mostafa [Department of Mechanical and Materials Engineering, Portland State University, Portland, OR 97201 (United States); Zhu, Yuntian, E-mail: ytzhu@ncsu.edu [Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695 (United States); Koch, Carl C.; Scattergood, Ronald O. [Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695 (United States)

    2016-02-15

    Radiation resistance of Fe–14Cr alloys under 200 keV He irradiation at 500 °C was systematically investigated with varying sizes of nano oxide Zr, Hf and Cr particles. It is found that these nano oxide particles acted as effective sites for He bubble formation. By statistically analyzing 700–1500 He bubbles at the depth of about 150–700 nm from a series of HRTEM images for each sample, we established the variation of average He bubble size, He bubble density, and swelling percentage along the depth, and found them to be consistent with the He concentration profile calculated from the SIRM program. Oxide particles with sizes less than 3.5–4 nm are found most effective for enhancing radiation resistance in the studied alloy systems.

  10. Influence of electropolishing and anodic oxidation on morphology, chemical composition and corrosion resistance of niobium

    Energy Technology Data Exchange (ETDEWEB)

    Sowa, Maciej; Greń, Katarzyna [Faculty of Chemistry, Silesian University of Technology, B. Krzywoustego Street 6, 44-100 Gliwice (Poland); Kukharenko, Andrey I. [Institute of Metal Physics, Russian Academy of Sciences-Ural Division, S. Kovalevskoi Street 18, 620990 Yekaterinburg (Russian Federation); Ural Federal University, Mira Street 19, 620002 Yekaterinburg, Mira str. 19 (Russian Federation); Korotin, Danila M. [Institute of Metal Physics, Russian Academy of Sciences-Ural Division, S. Kovalevskoi Street 18, 620990 Yekaterinburg (Russian Federation); Michalska, Joanna [Faculty of Materials Engineering and Metallurgy, Silesian University of Technology, Krasińskiego Street 8, 40-019 Katowice (Poland); Szyk-Warszyńska, Lilianna; Mosiałek, Michał [Jerzy Haber Institute of Catalysis and Surface Chemistry PAS, Niezapominajek Street 8, 30-239 Kraków (Poland); Żak, Jerzy [Faculty of Chemistry, Silesian University of Technology, B. Krzywoustego Street 6, 44-100 Gliwice (Poland); Pamuła, Elżbieta [AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Mickiewicza Avenue 30, 30-059 Kraków (Poland); Kurmaev, Ernst Z. [Institute of Metal Physics, Russian Academy of Sciences-Ural Division, S. Kovalevskoi Street 18, 620990 Yekaterinburg (Russian Federation); Cholakh, Seif O. [Ural Federal University, Mira Street 19, 620002 Yekaterinburg, Mira str. 19 (Russian Federation); Simka, Wojciech, E-mail: wojciech.simka@polsl.pl [Faculty of Chemistry, Silesian University of Technology, B. Krzywoustego Street 6, 44-100 Gliwice (Poland)

    2014-09-01

    The work presents results of the studies performed on electropolishing of pure niobium in a bath that contained: sulphuric acid, hydrofluoric acid, ethylene glycol and acetanilide. After the electropolishing, the specimens were subjected to anodic passivation in a 1 mol dm{sup −3} phosphoric acid solution at various voltages. The surface morphology, thickness, roughness and chemical composition of the resulting oxide layers were analysed. Thusly prepared niobium samples were additionally investigated in terms of their corrosion resistance in Ringer's solution. The electropolished niobium surface was determined to be smooth and lustrous. The anodisation led to the growth of barrier-like oxide layers, which were enriched in phosphorus species. - Highlights: • Pure niobium was electropolished and subsequently anodised in a H{sub 3}PO{sub 4} solution. • Phosphorus was successfully introduced into the oxide layers after the treatment. • Corrosion resistance of niobium in Ringer's solution was improved after anodising.

  11. High Temperature Steam Oxidation Testing of Candidate Accident Tolerant Fuel Cladding Materials

    Energy Technology Data Exchange (ETDEWEB)

    Pint, Bruce A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Terrani, Kurt A [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nelson, Andrew [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Parker, Scott [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Parkison, Adam [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2013-12-23

    The Fuel Cycle Research and Development (FCRD) program’s Advanced Fuels Campaign has initiated a multifold effort aimed at facilitating development of accident tolerant fuels in order to overcome the inherent shortcomings of light water reactor (LWR) fuels when exposed to beyond design basis accident conditions. The campaign has invested in development of experimental infrastructure within the Department of Energy complex capable of chronicling the performance of a wide range of concepts under prototypic accident conditions. This report summarizes progress made at Oak Ridge National Laboratory (ORNL) and Los Alamos National Laboratory (LANL) in FY13 toward these goals. Alternative fuel cladding materials to Zircaloy for accident tolerance and a significantly extended safety margin requires oxidation resistance to steam or steam-H2 environments at ≥1200°C for short times. At ORNL, prior work focused attention on SiC, FeCr and FeCrAl as the most promising candidates for further development. Also, it was observed that elevated pressure and H2 additions had minor effects on alloy steam oxidation resistance, thus, 1 bar steam was adequate for screening potential candidates. Commercial Fe-20Cr-5Al alloys remain protective up to 1475°C in steam and CVD SiC up to 1700°C in steam. Alloy development has focused on Fe-Cr-Mn-Si-Y and Fe-Cr-Al-Y alloys with the aluminaforming alloys showing more promise. At 1200°C, ferritic binary Fe-Cr alloys required ≥25% Cr to be protective for this application. With minor alloy additions to Fe-Cr, more than 20%Cr was still required, which makes the alloy susceptible to α’ embrittlement. Based on current results, a Fe-15Cr-5Al-Y composition was selected for initial tube fabrication and welding for irradiation experiments in FY14. Evaluations of chemical vapor deposited (CVD) SiC were conducted up to 1700°C in steam. The reaction of H2O with the alumina reaction tube at 1700°C resulted in Al(OH)3

  12. Detection and localization of changes in two-dimensional temperature distributions by electrical resistance tomography

    Science.gov (United States)

    Rashetnia, Reza; Hallaji, Milad; Smyl, Danny; Seppänen, Aku; Pour-Ghaz, Mohammad

    2017-11-01

    This paper studies the feasibility of applying electrical resistance tomography (ERT) to detect changes in two-dimensional (2D) temperature distributions with potential applications in sensor development. The proposed sensor consists of a thin layer of porous metal film manufactured by spraying colloidal copper paint to a solid surface. A change of the temperature distribution on the surface changes the 2D distributed electrical conductivity of the metal film. The change of the electrical conductivity is localized and quantified with ERT, and further, to convert the estimated conductivity change of the sensor to temperature change, an experimentally developed model is used. The proposed temperature sensor is evaluated experimentally by applying it to a polymeric substrate, and exposing it to known temperature changes using heat sources of different shapes. The results demonstrate that the proposed sensor is capable of detecting and localizing temperature changes, and provides at least qualitative information on the magnitude of the temperature change.

  13. Temperature effects on the fracture resistance of scales from Cyprinus carpio.

    Science.gov (United States)

    Murcia, Sandra; McConville, Mikaela; Li, Guihua; Ossa, Alex; Arola, D

    2015-03-01

    In this investigation the fracture resistance of scales from Cyprinus carpio was evaluated as a function of environmental temperature. Tear specimens were prepared from scales obtained from three characteristic regions (i.e. head, mid-length and tail) of multiple fish. The fracture resistance was characterized in Mode III loading and over temperatures ranging from -150°C to 21°C. Results showed that there was a significant reduction in tear resistance with decreasing temperature and the lowest resistance to fracture was obtained at -150°C. There was a significant difference in the relative tear toughness between scales from the three locations at ambient conditions (21°C), but not below freezing. Scales obtained near the head exhibited the largest resistance to fracture (energy ≈ 150 ± 25 kJm(-2)) overall. The fracture resistance was found to be primarily dependent on the thickness of the external mineralized layer and the number of external elasmodine plies, indicating that both the anatomical position and the corresponding microstructure are important to the mechanical behavior of elasmoid fish scales. These variables may be exploited in the design of bioinspired armors and should be considered in future studies concerning the mechanical behavior of these interesting natural materials. Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  14. Temperature and Oxidative Stress as Triggers for Virulence Gene Expression in Pathogenic Leptospira spp.

    Directory of Open Access Journals (Sweden)

    Tricia Fraser

    2017-05-01

    Full Text Available Leptospirosis is a zooanthroponosis aetiologically caused by pathogenic bacteria belonging to the genus, Leptospira. Environmental signals such as increases in temperatures or oxidative stress can trigger response regulatory modes of virulence genes during infection. This study sought to determine the effect of temperature and oxidative stress on virulence associated genes in highly passaged Leptospira borgpeterseneii Jules and L. interrogans Portlandvere. Bacteria were grown in EMJH at 30°C, 37°C, or at 30°C before being transferred to 37°C. A total of 14 virulence-associated genes (fliY, invA, lenA, ligB, lipL32, lipL36, lipL41, lipL45, loa22, lsa21, mce, ompL1, sph2, and tlyC were assessed using endpoint PCR. Transcriptional analyses of lenA, lipL32, lipL41, loa22, sph2 were assessed by quantitative real-time RT-PCR at the temperature conditions. To assess oxidative stress, bacteria were exposed to H2O2 for 30 and 60 min with or without the temperature stress. All genes except ligB (for Portlandvere and ligB and mce (for Jules were detectable in the strains. Quantitatively, temperature stress resulted in significant changes in gene expression within species or between species. Temperature changes were more influential in gene expression for Jules, particularly at 30°C and upshift conditions; at 37°C, expression levels were higher for Portlandvere. However, compared to Jules, where temperature was influential in two of five genes, temperature was an essential element in four of five genes in Portlandvere exposed to oxidative stress. At both low and high oxidative stress levels, the interplay between genetic predisposition (larger genome size and temperature was biased towards Portlandvere particularly at 30°C and upshift conditions. While it is clear that expression of many virulence genes in highly passaged strains of Leptospira are attenuated or lost, genetic predisposition, changes in growth temperature and/or oxidative intensity and

  15. Temperature and Oxidative Stress as Triggers for Virulence Gene Expression in Pathogenic Leptospira spp.

    Science.gov (United States)

    Fraser, Tricia; Brown, Paul D

    2017-01-01

    Leptospirosis is a zooanthroponosis aetiologically caused by pathogenic bacteria belonging to the genus, Leptospira. Environmental signals such as increases in temperatures or oxidative stress can trigger response regulatory modes of virulence genes during infection. This study sought to determine the effect of temperature and oxidative stress on virulence associated genes in highly passaged Leptospira borgpeterseneii Jules and L. interrogans Portlandvere. Bacteria were grown in EMJH at 30°C, 37°C, or at 30°C before being transferred to 37°C. A total of 14 virulence-associated genes (fliY, invA, lenA, ligB, lipL32, lipL36, lipL41, lipL45, loa22, lsa21, mce, ompL1, sph2, and tlyC) were assessed using endpoint PCR. Transcriptional analyses of lenA, lipL32, lipL41, loa22, sph2 were assessed by quantitative real-time RT-PCR at the temperature conditions. To assess oxidative stress, bacteria were exposed to H2O2 for 30 and 60 min with or without the temperature stress. All genes except ligB (for Portlandvere) and ligB and mce (for Jules) were detectable in the strains. Quantitatively, temperature stress resulted in significant changes in gene expression within species or between species. Temperature changes were more influential in gene expression for Jules, particularly at 30°C and upshift conditions; at 37°C, expression levels were higher for Portlandvere. However, compared to Jules, where temperature was influential in two of five genes, temperature was an essential element in four of five genes in Portlandvere exposed to oxidative stress. At both low and high oxidative stress levels, the interplay between genetic predisposition (larger genome size) and temperature was biased towards Portlandvere particularly at 30°C and upshift conditions. While it is clear that expression of many virulence genes in highly passaged strains of Leptospira are attenuated or lost, genetic predisposition, changes in growth temperature and/or oxidative intensity and/or duration

  16. Resistance of LHC main bus bar splices at room temperature and at 77.4 K

    CERN Document Server

    Heck, S; Scheuerlein, Chr; CERN. Geneva. TE Department

    2009-01-01

    As part of the quality control the resistance of newly produced LHC main bus bar splices is now routinely measured at room temperature (RT) in order to conclude on the electrical continuity of the bus bar stabiliser across the splice under operating conditions. In this note we present splice resistance measurements that have been performed at RT and in liquid nitrogen (LN) in the CERN Cryolab with “ideal” splices (represented by continuous dipole and quadrupole bus bars), and with dipole and quadrupole splices with different defects, which cause an additional RT splice resistance of up to 60 µΩ. The RT resistance (RRT) results obtained with the Cryolab set-up are compared to the calculated resistance values and with the so-called R-8 and R-16 resistance results, as they are measured in the LHC tunnel with a Digital Low Resistance Ohmmeter with a voltage tap distance of 8 cm or 16 cm. The RT to LN resistance ratio has been determined for all splices in order to study the influence of the resistance of th...

  17. Improving the oxidation resistance of AlCrN coatings by tailoring chromium out-diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Escobar Galindo, R., E-mail: rescobar@icmm.csic.es [Instituto de Ciencia de Materiales de Madrid, Consejo Superior de Investigaciones Cientificas, E-28049 Madrid (Spain); Endrino, J.L. [Instituto de Ciencia de Materiales de Madrid, Consejo Superior de Investigaciones Cientificas, E-28049 Madrid (Spain); Martinez, R. [AIN-Centro de Ingenieria Avanzada de Superficies, Cordovilla, E-31191 Pamplona (Spain); Albella, J.M. [Instituto de Ciencia de Materiales de Madrid, Consejo Superior de Investigaciones Cientificas, E-28049 Madrid (Spain)

    2010-11-15

    In this work, we have studied the improvement on the oxidation resistance of AlCrN-based coatings by adding a subsurface titanium nitride barrier layer. Since oxidation is interrelated with the inward diffusion of oxygen into the surface of Al{sub x}Cr{sub 1-x}N (x = 0.70) coatings and the outward diffusion of Cr to the surface, the oxidation behaviour of the aluminium-rich AlCrN coatings can be tuned by designing the coating in an appropriate layered structure. The buried depth of the embedded layer and the oxidation time were varied, and the changes in the AlCrN/TiN depth composition profiles and surface oxidation stoichiometry were analysed by means of Glow Discharge Optical Emission Spectroscopy (GDOES) and Cross Sectional SEM (X-SEM) maps. It was observed that when a TiN diffusion barrier of 300 nm was deposited near the top surface (500 nm from the surface) the inhibition of the inward diffusion of oxygen and formation of beneficial alumina surface layers was promoted and consequently an increase of the oxidation resistance is achieved. This is explained in terms of a limited surplus of chromium from the coating to the surface. This was corroborated after performing experiments using CrN as embedded barrier layer which resulted in a continuous surplus of chromium to the surface and the formation of Cr-rich oxides. GDOES, in combination with X-SEM elemental maps, was proved to be a fast and accurate technique to monitor composition in-depth changes during oxidation, providing unique information regarding the oxide structure formation.

  18. Temperature and high pressure effects on the structural features of catalytic nanocomposites oxides by Raman spectroscopy

    Science.gov (United States)

    da Silva, Antonio N.; Pinto, Raffael C. F.; Freire, Paulo T. C.; Junior, Jose Alves L.; Oliveira, Alcineia C.; Filho, Josué M.

    2015-03-01

    Structural characterizations of nanostructured oxides were studied by X-ray diffraction (XRD), Raman and infrared spectroscopy. The oxides catalysts namely, SnO2, ZrO2, CeO2, MnOx, Al2O3 and TiO2 were prepared by a nanocasting route and the effect of the temperature and pressure on the stability of the solids was evaluated. Raman spectra showed that ZrO2 and TiO2 exhibited phase transitions at moderate temperatures whereas CeO2, SnO2 and MnOx had an effective creation of defects in their structures upon annealing at elevated temperatures. The results suggested also that the effect of the temperature on the particles growth is related to the type of oxide. In this regard, phase transition by up to 600 °C accelerated the sintering of ZrO2 and CeO2 grains compared to TiO2, SnO2 and MnOx counterparts. Under hydrostatic pressures lower than 10 GPa, rutile TiO2 and tetragonal ZrO2 exhibited pressure induced phase transition whereas CeO2 and SnO2 were stable at pressures close to 15 GPa. The experiments revealed that the nanostructured SnO2 oxide exhibited stable performance at relatively high temperatures without phase transition or sintering, being suitable to be used as catalysts in the range of temperature and pressure studied.

  19. Effects of cryomilling on the microstructures and high temperature mechanical properties of oxide dispersion strengthened steel

    Science.gov (United States)

    Gwon, Jin-Han; Kim, Jeoung-Han; Lee, Kee-Ahn

    2015-04-01

    The effects of cryomilling on the microstructures and high temperature mechanical properties of oxide dispersion-strengthened (ODS) steel were examined. Cryomilling was newly tried on this ODS steel to control oxides, grains, and dislocation microstructures. Fe-14Cr-3W-0.4Ti (wt.%) alloy powder and 0.3 wt.%Y2O3 powder were mixed and were mechanically alloyed (MA) through ball milling at each of room temperature (RT) and -150 °C and then hot isostatic pressing (HIP), hot rolling, and annealing processes were implemented to manufacture two types of ODS ferritic steel, K1 (RT) and K4 (-150 °C). Oxide particles were shown to be finer and more uniformly distributed in K4 (5-10 nm size distribution) than in K1 (average size 30 nm). The two alloys were subjected to high temperature compression (RT ∼ 900 °C) tests. K4 represented higher yield strength under all temperature conditions. However, K4 showed rapid strength decreases at high temperatures exceeding 700 °C and showed similar levels of strengths to K1 at 900 °C. This is considered attributable to the fact that although cryomilling increased the number density of oxide particles, it simultaneously reduced grain sizes too much, so that grain boundary weakening at high temperatures could not be sufficiently prevented.

  20. Effects of cryomilling on the microstructures and high temperature mechanical properties of oxide dispersion strengthened steel

    Energy Technology Data Exchange (ETDEWEB)

    Gwon, Jin-Han [Dept. of Advanced Mat. Eng., Andong National University, Andong 760-749 (Korea, Republic of); Kim, Jeoung-Han [Dept. of Advanced Mat. Eng., Hanbat National University, Daejeon 305-719 (Korea, Republic of); Lee, Kee-Ahn, E-mail: keeahn@andong.ac.kr [Dept. of Advanced Mat. Eng., Andong National University, Andong 760-749 (Korea, Republic of)

    2015-04-15

    The effects of cryomilling on the microstructures and high temperature mechanical properties of oxide dispersion-strengthened (ODS) steel were examined. Cryomilling was newly tried on this ODS steel to control oxides, grains, and dislocation microstructures. Fe–14Cr–3W–0.4Ti (wt.%) alloy powder and 0.3 wt.%Y{sub 2}O{sub 3} powder were mixed and were mechanically alloyed (MA) through ball milling at each of room temperature (RT) and −150 °C and then hot isostatic pressing (HIP), hot rolling, and annealing processes were implemented to manufacture two types of ODS ferritic steel, K1 (RT) and K4 (−150 °C). Oxide particles were shown to be finer and more uniformly distributed in K4 (5–10 nm size distribution) than in K1 (average size 30 nm). The two alloys were subjected to high temperature compression (RT ∼ 900 °C) tests. K4 represented higher yield strength under all temperature conditions. However, K4 showed rapid strength decreases at high temperatures exceeding 700 °C and showed similar levels of strengths to K1 at 900 °C. This is considered attributable to the fact that although cryomilling increased the number density of oxide particles, it simultaneously reduced grain sizes too much, so that grain boundary weakening at high temperatures could not be sufficiently prevented.

  1. Corrosion-resistant coating for GTE compressor parts made of steels with low tempering temperatures

    Science.gov (United States)

    Muboyadzhyan, S. A.; Egorova, L. P.; Gorlov, D. S.; Bulavintseva, E. E.

    2017-01-01

    The corrosion resistance of an Ni-Co-Cr-Al-Si-Y + SPh (SPh is silicophosphate impregnation) alloy coating on 30Kh13, 38Kh2MYuA, VKS5, and VKS7 structural steels with low tempering temperatures has been studied. The steel-coating compositions have been tested to determine the accelerated cyclic corrosion resistance, the corrosion resistance under tropic climate chamber conditions and in salt fog, the stress corrosion resistance, and the corrosion resistance in an industrial atmosphere. The heat stability of coated samples is studied, metallographic studies of the samples before and after the tests are performed, and the influence of the coating on the strength characteristics of the structural steels is studied.

  2. Oxidative stress and antioxidant responses to progressive resistance exercise intensity in trained and untrained males.

    Science.gov (United States)

    Çakır-Atabek, H; Özdemir, F; Çolak, R

    2015-11-01

    The relationship between oxidative stress and some exercise components of resistance exercise (e.g. intensity, exercise volume) has not been clearly defined. Additionally, the oxidative stress markers may respond differently in various conditions. This study aims to determine the effects of progressive intensity of resistance exercise (RE) on oxidative stress and antioxidants in trained and untrained men, and also to investigate the possible threshold intensity required to evoke oxidative stress. RE trained (N=8) and untrained (N=8) men performed the leg extension RE at progressive intensities standardized for total volume: 1x17 reps at 50% of one-repetition maximum (1RM); 1x14 reps at 60% of 1RM; 1x12 reps at 70% of 1RM; 2x5 reps at 80% of 1RM; and 3x3 reps at 90% of 1RM. Blood samples were drawn before (PRE) and immediately after each intensity, and after 30 minutes, 60 minutes and 24 hours following the RE. Lipid-hydroperoxide (LHP) significantly increased during the test and then decreased during the recovery in both groups (plevel was lower than PRE-LHP. Protein carbonyl (PCO) and superoxide dismutase (SOD) significantly increased (p 0.05). The results indicated that there was no significant training status x intensity interaction for examined variables (p > 0.05). Standardized volume of RE increased oxidative stress responses. Our study suggests that lower intensity (50%) is enough to increase LHP, whereas higher intensity (more than 80%) is required to evoke protein oxidation.

  3. Oxidative stress and antioxidant responses to progressive resistance exercise intensity in trained and untrained males

    Directory of Open Access Journals (Sweden)

    H Çakır-Atabek

    2015-11-01

    Full Text Available The relationship between oxidative stress and some exercise components of resistance exercise (e.g. intensity, exercise volume has not been clearly defined. Additionally, the oxidative stress markers may respond differently in various conditions. This study aims to determine the effects of progressive intensity of resistance exercise (RE on oxidative stress and antioxidants in trained and untrained men, and also to investigate the possible threshold intensity required to evoke oxidative stress. RE trained (N=8 and untrained (N=8 men performed the leg extension RE at progressive intensities standardized for total volume: 1x17 reps at 50% of one-repetition maximum (1RM; 1x14 reps at 60% of 1RM; 1x12 reps at 70% of 1RM; 2x5 reps at 80% of 1RM; and 3x3 reps at 90% of 1RM. Blood samples were drawn before (PRE and immediately after each intensity, and after 30 minutes, 60 minutes and 24 hours following the RE. Lipid-hydroperoxide (LHP significantly increased during the test and then decreased during the recovery in both groups (p0.05. Standardized volume of RE increased oxidative stress responses. Our study suggests that lower intensity (50% is enough to increase LHP, whereas higher intensity (more than 80% is required to evoke protein oxidation.

  4. Effects of ion temperature fluctuations on the stability of resistive ballooning modes

    Energy Technology Data Exchange (ETDEWEB)

    Singh, R. [Inst. for Plasma Research, Bhat, Gandhinagar (India); Nordman, H.; Jarmen, A.; Weiland, J. [Chalmers Univ. of Technology, Goeteborg (Sweden). Inst. for Electromagnetic Field Theory and Plasma Physics

    1996-11-01

    The influence of ion temperature fluctuations on the stability of resistive drift- and ballooning-modes is investigated using a two-fluid model. The Eigenmode equations are derived and solved analytically in a low beta model equilibrium. Parameters relevant to L-mode edge plasmas from the Texas Experimental Tokamak are used. The resistive modes are found to be destabilized by ion temperature fluctuations over a broad range of mode numbers. The scaling of the growth rate with magnetic shear and mode number is elucidated. 13 refs, 4 figs.

  5. Investigations of temperature dependences of electrical resistivity and specific heat capacity of metals

    Energy Technology Data Exchange (ETDEWEB)

    Eser, Erhan, E-mail: eserphy@gmail.com [Department of Physics, Polatlı Faculty of Arts and Sciences, Gazi University, Polatlı, Ankara (Turkey); Koç, Hüseyin [Department of Electrical and Electronics Engineering, Faculty of Engineering, Muş Alparslan University, Muş (Turkey)

    2016-07-01

    In this study, we calculated the electrical resistivity and heat capacities of some ideal metals (Cu, Pt, and Pd) using a method that it employs the statistical model and Debye functions. The method is used to provide a simple and reliable analytical procedure for wide temperature range. The results obtained for the electrical resistivity and heat capacity have been compared with the results in literature. The results obtained at low temperature are in excellent agreement with experimental and theoretical results. Finally the used approximation and analytical method are a useful approach to calculate thermophysical properties of metals.

  6. Two temperature approach to femtosecond laser oxidation of molybdenum and morphological study

    Science.gov (United States)

    Kotsedi, L.; Kaviyarasu, K.; Fuku, X. G.; Eaton, S. M.; Amara, E. H.; Bireche, F.; Ramponi, R.; Maaza, M.

    2017-11-01

    The two-temperature model was used to gain insight into the thermal evolution of the hot electrons and the crystal lattice of the molybdenum thin coating during femtosecond laser treatment. The heat from the laser raised the bulk temperature of the sample through heat transfer from the hot electron to the crystal lattice of the material, which then led to the melting of the top layer of the film. This process resulted in the hot melt reacting ambient oxygen, which in turn oxidized the surface of molybdenum coating. The topological study and morphology of the oxidized film was conducted using high-resolution scanning electron microscope, with micrographs taken in both the cross-sectional geometry and normal incidence to the electron beam. The molybdenum oxide nanorods were clearly observed and the x-ray diffraction patterns showed the diffraction peaks due to molybdenum oxide.

  7. Effects of W on microstructure and high-temperature oxidation behavior of ferritic stainless steel weldment

    Science.gov (United States)

    Ji, Yijie; Xie, Yuye; Zhu, Shuangchun; Yan, Biao

    2017-07-01

    With the promotion of fuel economy policy and automobile lightweight concept, ferritic stainless steels applied in vehicles’ exhaust hot end systems have been developed. This paper simulated the high-temperature environment at which the automobile exhaust system serviced in for high-temperature corrosion. Kinetic curves were conducted in isothermal environments at 1000∘C. X-ray diffraction, scanning electron microscope and energy dispersive spectrometer were used to study the oxidation behavior of ferritic stainless steels and the effects of tungsten (W) addition. The results show that, with increasing oxidation time, the rate of weight gains increase and the main failure is spalling of surface oxide layer. The addition of W has a complicated effect on the oxidation behavior of ferritic stainless steel weldment.

  8. Role of tantalum nitride as active top electrode in electroforming-free bipolar resistive switching behavior of cerium oxide-based memory cells

    Energy Technology Data Exchange (ETDEWEB)

    Ismail, Muhammad, E-mail: ismailmalikbzu10@gmail.com [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); Ahmed, Ejaz; Rana, Anwar Manzoor; Talib, Ijaz; Khan, Tahira [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); Iqbal, Khalid [Department of Radiation Oncology, Shaukat Khanum Memorial Cancer Hospital and Research Centre, Lahore (Pakistan); Nadeem, Muhammad Younus [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan)

    2015-05-29

    Electroforming-free cerium oxide-based bipolar resistive switching memory devices have been deposited using radio frequency magnetron sputtering technique. These devices demonstrate two types of forming-free cells: some in the low-resistance state and the others in high-resistance state. The transmission electron microscopy and X-ray diffraction analyses illustrate the formation of tantalum oxynitride layer between tantalum nitride (TaN) and cerium oxide (CeO{sub x}), which looks to be responsible for the two types of cells as well as their memory performance. Ohmic and Poole-Frenkel conduction mechanisms are found to be responsible for charge transport in the low- and high-resistance states. The current-voltage characteristics and temperature dependence of resistance suggest that resistive switching mechanism in our TaN/CeO{sub x}/Pt devices may be explained by the model of connection and disconnection of filamentary paths made of oxygen vacancies. The reliability characteristics of TaN/CeO{sub x}/Pt devices indicate better endurance and stable retention performance at relatively lower programming voltages and larger memory window (OFF/ON resistance ratio ~ 10{sup 3}) at room temperature and at 100 °C. - Highlights: • Electroforming-free TaN/CeO{sub x}/Pt memory cells have been fabricated by sputtering. • Device exhibits good endurance, long data retention and high-resistance window (~ 10{sup 3}). • Voltages for SET and RESET transitions of our device exhibit narrow distribution. • The device is forming-free due to pre-existence of abundant oxygen vacancies. • TaN top electrode play major role in uniformity of resistive switching characteristics.

  9. Electron transport and low-temperature electrical and galvanomagnetic properties of zinc oxide and indium oxide films

    Science.gov (United States)

    Kulbachinskii, V. A.; Kytin, V. G.; Reukova, O. V.; Burova, L. I.; Kaul, A. R.; Ulyashin, A. G.

    2015-02-01

    The electrical and galvanomagnetic properties of zinc oxide films with and without gallium, aluminum, and cobalt doping and of tin-doped indium oxide films are studied over a wide range of temperatures and magnetic fields. It is shown that the mechanism for electron transport in these films changes from band to hopping transport as the degree of crystallinity of the films is reduced because of the methods and conditions for their synthesis. The change in the dimensionality of the films with band electron transport at low temperatures is studied in terms of the weak localization induced by a magnetic field. The localization radius and density of electron states in the Fermi level are estimated for the films with a hopping electron transport.

  10. New insights in the low-temperature oxidation of acetylene

    DEFF Research Database (Denmark)

    Wang, Bing-Yin; Liu, Yue-Xi; Weng, Jun-Jie

    2017-01-01

    and the reaction with O are the two major channels governing C2H2 consumption. At temperatures below 1000K, benzene is mainly formed through the C2+C4 channels:C2H2+iC4H5→fulvene→C5H5CH2 isomers→C6H6.The C1+C5 pathway: CH3+C5H5→C5H5CH3→(fulvene and C5H5CH2 radicals)→C6H6 tends to be the dominant route for benzene...... to reactions of the vinyl radical and to steps involved in the sequence C2H2→iC4H5→fulvene→C5H5CH2→C6H6. In general, the peak concentrations of intermediates gradually increase and peak locations tend to shift toward high temperatures with Φ increasing. Flux analysis indicates that the addition of H...

  11. Crystallization and electrical resistivity of Cu{sub 2}O and CuO obtained by thermal oxidation of Cu thin films on SiO{sub 2}/Si substrates

    Energy Technology Data Exchange (ETDEWEB)

    De Los Santos Valladares, L., E-mail: ld301@cam.ac.uk [Cavendish Laboratory, University of Cambridge, J.J Thomson Av., Cambridge CB3 0HE (United Kingdom); Materials and Structures Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503 (Japan); Departamento de Fisica, Universidade Federal de Pernambuco, 50670-901, Recife-Pe (Brazil); Salinas, D. Hurtado [Materials and Structures Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503 (Japan); Laboratorio de Ceramicos y Nanomateriales, Facultad de Ciencias Fisicas, Universidad Nacional Mayor de San Marcos, Ap. Postal 14-0149, Lima (Peru); Dominguez, A. Bustamante [Laboratorio de Ceramicos y Nanomateriales, Facultad de Ciencias Fisicas, Universidad Nacional Mayor de San Marcos, Ap. Postal 14-0149, Lima (Peru); Najarro, D. Acosta [Instituto de Fisica, Departamento de Materia Condensada, Universidad Nacional Autonoma de Mexico, Ap. Postal 20-364, CP 01000 (Mexico); Khondaker, S.I. [NanoScience Technology Centre and Department of Physics, University of Central Florida, Orlando, FL 32826 (United States); Mitrelias, T.; Barnes, C.H.W. [Cavendish Laboratory, University of Cambridge, J.J Thomson Av., Cambridge CB3 0HE (United Kingdom); Aguiar, J. Albino [Departamento de Fisica, Universidade Federal de Pernambuco, 50670-901, Recife-Pe (Brazil); Majima, Y. [Materials and Structures Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503 (Japan); CREST, Japan Science and Technology Agency (JST), 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503 (Japan)

    2012-08-01

    In this work, we study the crystallization and electrical resistivity of the formed oxides in a Cu/SiO{sub 2}/Si thin film after thermal oxidation by ex-situ annealing at different temperatures up to 1000 Degree-Sign C. Upon increasing the annealing temperature, from the X ray diffractogram the phase evolution Cu {yields} Cu + Cu{sub 2}O {yields} Cu{sub 2}O {yields} Cu{sub 2}O + CuO {yields} CuO was detected. Pure Cu{sub 2}O films are obtained at 200 Degree-Sign C, whereas uniform CuO films without structural surface defects such as terraces, kinks, porosity or cracks are obtained in the temperature range 300-550 Degree-Sign C. In both oxides, crystallization improves with annealing temperature. A resistivity phase diagram, which is obtained from the current-voltage response, is presented here. The resistivity was expected to increase linearly as a function of the annealing temperature due to evolution of oxides. However, anomalous decreases are observed at different temperatures ranges, this may be related to the improvement of the crystallization and crystallite size when the temperature increases. - Highlights: Black-Right-Pointing-Pointer The crystallization and electrical resistivity of oxides in a Cu films are studied. Black-Right-Pointing-Pointer In annealing Cu films, the phase evolution Cu + Cu{sub 2}O {yields} Cu{sub 2}O {yields} Cu{sub 2}O + CuO {yields} CuO occurs. Black-Right-Pointing-Pointer A resistivity phase diagram, obtained from the current-voltage response, is presented. Black-Right-Pointing-Pointer Some decreases in the resistivity may be related to the crystallization.

  12. Mitochondrial function and energy metabolism in neuronal HT22 cells resistant to oxidative stress

    Science.gov (United States)

    Pfeiffer, Annika; Jaeckel, Martin; Lewerenz, Jan; Noack, Rebecca; Pouya, Alireza; Schacht, Teresa; Hoffmann, Christina; Winter, Jennifer; Schweiger, Susann; Schäfer, Michael K E; Methner, Axel

    2014-01-01

    Background and Purpose The hippocampal cell line HT22 is an excellent model for studying the consequences of endogenous oxidative stress. Extracellular glutamate depletes cellular glutathione by blocking the glutamate/cystine antiporter system xc−. Glutathione depletion induces a well-defined programme of cell death characterized by an increase in reactive oxygen species and mitochondrial dysfunction. Experimental Approach We compared the mitochondrial shape, the abundance of mitochondrial complexes and the mitochondrial respiration of HT22 cells, selected based on their resistance to glutamate, with those of the glutamate-sensitive parental cell line. Key Results Glutamate-resistant mitochondria were less fragmented and displayed seemingly contradictory features: mitochondrial calcium and superoxide were increased while high-resolution respirometry suggested a reduction in mitochondrial respiration. This was interpreted as a reverse activity of the ATP synthase under oxidative stress, leading to hydrolysis of ATP to maintain or even elevate the mitochondrial membrane potential, suggesting these cells endure ineffective energy metabolism to protect their membrane potential. Glutamate-resistant cells were also resistant to oligomycin, an inhibitor of the ATP synthase, but sensitive to deoxyglucose, an inhibitor of hexokinases. Exchanging glucose with galactose rendered resistant cells 1000-fold more sensitive to oligomycin. These results, together with a strong increase in cytosolic hexokinase 1 and 2, a reduced lactate production and an increased activity of glucose-6-phosphate dehydrogenase, suggest that glutamate-resistant HT22 cells shuttle most available glucose towards the hexose monophosphate shunt to increase glutathione recovery. Conclusions and Implications These results indicate that mitochondrial and metabolic adaptations play an important role in the resistance of cells to oxidative stress. Linked Articles This article is part of a themed issue on

  13. Chloride promoted room temperature preparation of silver nanoparticles on two dimensional tungsten oxide nanoarchitectures for the catalytic oxidation of tertiary N-compounds to N-oxides

    Science.gov (United States)

    Ghosh, Shilpi; Acharyya, Shankha S.; Kumar, Malika; Bal, Rajaram

    2015-09-01

    A halide ion promoted two dimensional silver tungsten-based nanomaterial was synthesized by a facile one-pot synthesis protocol at room temperature. The 2D morphology features high activity and selectivity for the oxidation of a wide range of tertiary N-compounds to their corresponding N-oxides. The morphology of Ag/WO3 materials can be varied by changing the synthesis parameters. The unique 2D plate like morphology of tungsten oxide increases adsorption sites of the support, leading to less sintering and higher dispersion of silver nanoparticles, resulting in significantly enhanced activity for the reaction. The influence of reaction parameters such as temperature, substrate to oxidant molar ratio, reaction time, etc. was investigated in detail. The catalyst was characterized by XRD, XPS, ICP-AES, TGA, FT-IR, UV-vis, Raman, SEM, TEM and STEM. Raman studies further provide mechanistic insight which proves that the formation of peroxo tungsten species is responsible for the N-oxidation reaction. High stability and recyclability of the 2D Ag/WO3 nanoplates are also observed under the investigated conditions.A halide ion promoted two dimensional silver tungsten-based nanomaterial was synthesized by a facile one-pot synthesis protocol at room temperature. The 2D morphology features high activity and selectivity for the oxidation of a wide range of tertiary N-compounds to their corresponding N-oxides. The morphology of Ag/WO3 materials can be varied by changing the synthesis parameters. The unique 2D plate like morphology of tungsten oxide increases adsorption sites of the support, leading to less sintering and higher dispersion of silver nanoparticles, resulting in significantly enhanced activity for the reaction. The influence of reaction parameters such as temperature, substrate to oxidant molar ratio, reaction time, etc. was investigated in detail. The catalyst was characterized by XRD, XPS, ICP-AES, TGA, FT-IR, UV-vis, Raman, SEM, TEM and STEM. Raman studies

  14. Plasticity in behavioural responses and resistance to temperature stress in Musca domestica

    DEFF Research Database (Denmark)

    Kjaersgaard, Anders; Blackenhorn, Wolf U.; Pertoldi, Cino

    2015-01-01

    performance and morphology of three European populations of Musca domestica (Diptera: Muscidae) originating from different thermal conditions (Spain, Switzerland and Denmark) at benign and stressful high temperatures. Spanish flies showed greater heat resistance than Swiss and Danish flies. Similarly......, at the stressful high temperature Spanish flies flew the furthest and Danish flies the shortest distance. Neither body size nor wing loading affected flight performance, although flies with narrower wings tended to fly further (wing shape effect). Swiss flies were most active in terms of locomotor activity...... at the benign temperature, whereas the Spanish flies were able to stay active for longer at the stressful temperature. Population differences in behavioural traits and heat resistance were obtained using flies held for several generations in a laboratory common garden setting; therefore we suggest that exposure...

  15. Resistive Switching and Memory effects in Silicon Oxide Based Nanostructures

    Science.gov (United States)

    Yao, Jun

    Silicon oxide (SiOx 1 memory is studied. From electrode-independent electrical behaviors to the visualization of the conducting filament inside the SiOx matrix, the intrinsic switching picture in SiOx is gradually revealed. The thesis starts with the introduction of some similar phenomenological switching behaviors in different electronic structures (Chapter 1), and then generalizes the electrode-material-independent electrical behaviors on SiOx substrates, providing indirect evidence to the intrinsic SiOx switching (Chapter 2). From planar nanogap systems to vertical sandwiched structures, Chapter 3 further discusses the switching behaviors and properties in SiOx. By localization of the switching site, the conducting filament in SiOx is visualized under transmission electron microscope using both static and in situ imaging methods (Chapter 4). With the intrinsic conduction and switching in SiO x largely revealed, Chapter 5 discusses its impact and implications to the molecular electronics and nanoelectronics where SiOx is constantly used. As comparison, another type of memory effect in semiconductors (carbon nanotubes) based on charge trapping at the semiconductor/SiO x interface is discussed (Chapter 6).

  16. Codeposition of deuterium ions with beryllium oxide at elevated temperatures

    CERN Document Server

    Markin, A V; Gorodetsky, A E; Negodaev, M A; Rozhanskii, N V; Scaffidi-Argentina, F; Werle, H; Wu, C H; Zalavutdinov, R K; Zakharov, A P

    2000-01-01

    Deuterium-loaded BeO films were produced by sputtering the beryllium target with 10 keV Ne ions in D sub 2 gas at a pressure of approximately 1 Pa. The sputtered beryllium reacts - on the substrate surface - with the residual oxygen, thus forming a beryllium oxide layer. Biasing the substrate negatively with respect to the target provides the simultaneous bombardment of the growing film surface with D ions formed by Ne-D sub 2 collisions. Substrate potential governs the maximum energy of ions striking the growing film surface while its size governs the flux density. According to X-ray photoelectron spectroscopy (XPS), electron probe microanalysis (EPMA) and reflection high energy electron diffraction (RHEED) data, the beryllium is deposited in the form of polycrystalline hcp-BeO layers with negligible (about 1 at.%) carbon and neon retention. Thermal desorption spectroscopy (TDS) data shows a strong deuterium bonding, with a desorption peak at 950 K, in the films deposited at -50 and -400 V substrate potentia...

  17. HIGH-TEMPERATURE TUBULAR SOLID OXIDE FUEL CELL GENERATOR DEVELOPMENT

    Energy Technology Data Exchange (ETDEWEB)

    S.E. Veyo

    1998-09-01

    During the Westinghouse/USDOE Cooperative Agreement period of November 1, 1990 through November 30, 1997, the Westinghouse solid oxide fuel cell has evolved from a 16 mm diameter, 50 cm length cell with a peak power of 1.27 watts/cm to the 22 mm diameter, 150 cm length dimensions of today's commercial prototype cell with a peak power of 1.40 watts/cm. Accompanying the increase in size and power density was the elimination of an expensive EVD step in the manufacturing process. Demonstrated performance of Westinghouse's tubular SOFC includes a lifetime cell test which ran for a period in excess of 69,000 hours, and a fully integrated 25 kWe-class system field test which operated for over 13,000 hours at 90% availability with less than 2% performance degradation over the entire period. Concluding the agreement period, a 100 kW SOFC system successfully passed its factory acceptance test in October 1997 and was delivered in November to its demonstration site in Westervoort, The Netherlands.

  18. Statics and dynamics of nitrous oxide and nitrogen oxide adsorption on acid-resisting adsorbents

    Energy Technology Data Exchange (ETDEWEB)

    Kovalev, S.D.; Starobinets, S.E.; Kefer, P.G.; Puzanov, I.S.

    1982-01-01

    The basic quantitative characteristics of statics of nitrous oxide and nitrogen oxide adsorption on H - mordenite, Na - erionite, KSM silica gel and also dynamics of N/sub 2/O and NO adsorption on H - mordenite are obtained to develop the adsorption method of nitrogen oxide release from technological gaseous mixture of power plant with a dissociating coolant. The parameters ''n'' and ''E'' of the equation of the theory of volumetric filling in N/sub 2/O adsorption on H-mordenite are equal to 2.5 and 16.4 kj respectively, the height of the operating layer is 0.08-0.15 m with gaseous flow velocity 0.05-0.2 m/sec. NO adsorption is localized and isn't accompanied by disproportionation to N/sub 2/O and NO/sub 2/ with concentrations less than 20 vol.%.

  19. Magnetic properties of NiO (nickel oxide) nanoparticles : Blocking temperature and Neel temperature

    NARCIS (Netherlands)

    Tadic, Marin; Nikolic, Dobrica; Panjan, Matjaz; Blake, Graeme R.

    2015-01-01

    Crystalline nickel oxide (NiO) nanoparticles dispersed in an amorphous silica matrix have been prepared by a sol-gel combustion synthesis method. The sample was characterized using X-ray powder diffraction, energy-dispersive X-ray spectroscopy, scanning electron microscopy, transmission electron

  20. Effect of Sintering Temperature on the Properties of Aluminium-Aluminium Oxide Composite Materials

    Directory of Open Access Journals (Sweden)

    Dewan Muhammad Nuruzzaman

    2016-12-01

    Full Text Available In this study, aluminium-aluminium oxide (Al-Al2O3 metal matrix composites of different weight percentage reinforcements of aluminium oxide were processed at different sintering temperatures. In order to prepare these composite specimens, conventional powder metallurgy (PM method was used. Three types specimens of different compositions such as 95%Al+5%Al2O3, 90%Al+10%Al2O3 and 85%Al+15%Al2O3 were prepared under 20 Ton compaction load. Then, all the specimens were sintered in a furnace at two different temperatures 550oC and 580oC. In each sintering process, two different heating cycles were used. After the sintering process, it was observed that undistorted flat specimens were successfully prepared for all the compositions. The effects of sintering temperature and weight fraction of aluminium oxide particulates on the density, hardness and microstructure of Al-Al2O3 composites were observed. It was found that density and hardness of the composite specimens were significantly influenced by sintering temperature and percentage aluminium oxide reinforcement. Furthermore, optical microscopy revealed that almost uniform distribution of aluminium oxide reinforcement within the aluminium matrix was achieved.

  1. Oxide particle coarsening at temperature over 1473K in 9CrODS steel

    Directory of Open Access Journals (Sweden)

    N. Oono

    2016-12-01

    Full Text Available The oxide particle coarsening was evaluated at temperature over 1473K by means of transmission electron microscopy (TEM. After annealing of the 9CrODS extruded bar, the size of oxide particles increases while the number density decreases, indicating that the oxide particles coarsen through Ostwald ripening. The growth rate of the oxide particles follows the fifth-power law, which is in the region of dislocation ‘pipe’ diffusion. The activation energy for pipe diffusion, however, was remarkably high, derived as 891KJ/mole. The stability of oxide particles and the difference of the diffusion velocity in between bcc-δ phase and fcc-γ phase should be considered as the contributions to the activation energy.

  2. A liquid metal reaction environment for the room-temperature synthesis of atomically thin metal oxides

    Science.gov (United States)

    Zavabeti, Ali; Ou, Jian Zhen; Carey, Benjamin J.; Syed, Nitu; Orrell-Trigg, Rebecca; Mayes, Edwin L. H.; Xu, Chenglong; Kavehei, Omid; O’Mullane, Anthony P.; Kaner, Richard B.; Kalantar-zadeh, Kourosh; Daeneke, Torben

    2017-10-01

    Two-dimensional (2D) oxides have a wide variety of applications in electronics and other technologies. However, many oxides are not easy to synthesize as 2D materials through conventional methods. We used nontoxic eutectic gallium-based alloys as a reaction solvent and co-alloyed desired metals into the melt. On the basis of thermodynamic considerations, we predicted the composition of the self-limiting interfacial oxide. We isolated the surface oxide as a 2D layer, either on substrates or in suspension. This enabled us to produce extremely thin subnanometer layers of HfO2, Al2O3, and Gd2O3. The liquid metal–based reaction route can be used to create 2D materials that were previously inaccessible with preexisting methods. The work introduces room-temperature liquid metals as a reaction environment for the synthesis of oxide nanomaterials with low dimensionality.

  3. High-temperature oxidation/corrosion of iron-based superalloys

    Science.gov (United States)

    Lemkey, F. D.; Smeggil, J. G.; Bailey, R. S.; Schuster, J. C.; Nowotny, H.

    1987-01-01

    The oxidation and sulfidation of several novel iron-base superalloys were evaluated in high-temperature cyclic tests. The experimental austenitic alloys examined were modifications of NASAUT-4GA which were developed for Stirling-engine application. The weight gains and resulting surface scales were measured and analyzed. Mixed oxide scales were found to form on all specimens exposed above 871 C. The build-up of these scales led to a depletion of Mn and Cr in a zone adjacent to the oxides. In addition, the initial oxidation of the Fe-rich alloy was inhibited by a thin but tenacious Si layer which formed at the interface between oxides and the parent layer. Sulfidation tests using Na2SO4 coatings resulted in the formation of a protective spinel and alpha-Fe2O3 phases. Preferential attack of the carbide phase by hydrogen was not observed after 350 h at 871 C.

  4. Homogenization Pressure and Temperature Affect Protein Partitioning and Oxidative Stability of Emulsions

    DEFF Research Database (Denmark)

    Horn, Anna Frisenfeldt; Barouh, Nathalie; Nielsen, Nina Skall

    2013-01-01

    it decreased the oxidative stability of emulsions with α-lactalbumin and β-lactoglobulin. For both types of emulsions the partitioning of proteins between the interface and the aqueous phase appeared to be important for the oxidative stability. The effect of pre-heating the aqueous phase with the milk proteins......The oxidative stability of 10 % fish oil-in-water emulsions was investigated for emulsions prepared under different homogenization conditions. Homogenization was conducted at two different pressures (5 or 22.5 MPa), and at two different temperatures (22 and 72 °C). Milk proteins were used...

  5. Low temperature methane oxidation on differently supported 2 nm Au nanoparticles

    DEFF Research Database (Denmark)

    Walther, Guido; Gontard, Lionel Cervera; Quaade, Ulrich

    2009-01-01

    Low temperature CH4 oxidation was studied on 2 nm gold nanoparticles supported on various metaloxides. The differences in reaction rates for the different systems suggest that the support material has an effect on the activity. From TEM analysis, we found that the gold particles were stable in size...... during the reaction. In addition to full oxidation to CO2, traces of C2H6 were detected when Au/TiO2 was used, indicating limited partial CH4 oxidation. TiO2 was found to be the best support for gold nanoparticles both in terms of activity and gold particle stability....

  6. Thermodynamic Studies of the Phase Relationships of Nonstoichiometric Cerium Oxides at Higher Temperatures

    DEFF Research Database (Denmark)

    Sørensen, Ole Toft

    1976-01-01

    Partial molar thermodynamic quantities for oxygen in nonstoichiometric cerium oxides were determined by thermogravimetric analysis in CO/CO2 mixtures in the temperature range 900–1400°C. Under these conditions compositions within the range 2.00 greater-or-equal, slanted O/M greater-or-equal, slan......Partial molar thermodynamic quantities for oxygen in nonstoichiometric cerium oxides were determined by thermogravimetric analysis in CO/CO2 mixtures in the temperature range 900–1400°C. Under these conditions compositions within the range 2.00 greater-or-equal, slanted O/M greater...

  7. Note: A method for minimizing oxide formation during elevated temperature nanoindentation

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, I. C.; Hodge, A. M., E-mail: ahodge@usc.edu [Department of Aerospace and Mechanical Engineering, University of Southern California, 3650 McClintock Avenue OHE430, Los Angeles, California 90089 (United States); Garcia-Sanchez, E. [Department of Aerospace and Mechanical Engineering, University of Southern California, 3650 McClintock Avenue OHE430, Los Angeles, California 90089 (United States); Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, Av. Universidad S/N, San Nicolás de los Garza, NL 66450 (Mexico)

    2014-09-15

    A standardized method to protect metallic samples and minimize oxide formation during elevated-temperature nanoindentation was adapted to a commercial instrument. Nanoindentation was performed on Al (100), Cu (100), and W (100) single crystals submerged in vacuum oil at 200 °C, while the surface morphology and oxidation was carefully monitored using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The results were compared to room temperature and 200 °C nanoindentation tests performed without oil, in order to evaluate the feasibility of using the oil as a protective medium. Extensive surface characterization demonstrated that this methodology is effective for nanoscale testing.

  8. Correlation between temperature dependent dielectric and DC resistivity of Cr substituted barium hexaferrite

    Science.gov (United States)

    Kumar, Sunil; Supriya, Sweety; Kar, Manoranjan

    2017-12-01

    The chromium substituted barium hexaferrite (BaFe12O19) crystallize to the hexagonal symmetry (P63/mmc space group), which has been studied by employing the XRD technique. The XRD analysis is supported by the Raman spectra and, microstructural analysis has been carried out by the FESEM (field emission scanning electron microscope) technique. Average particle size is found to be around 85 nm. Two peaks are observed in the temperature versus dielectric constant plots and, these two transition temperatures are identified as T d and T m. The temperature T d is due to dipole relaxation, whereas T m is assigned as dielectric phase transition. Both T d and T m increase with the increase in frequency. However, the former one (i.e. T d) increases more rapidly compare to that of later one (i.e. T m). Both the temperature (T d and T m) are also well identified in the temperature dependent DC resistivity. All the samples exhibit the negative temperature coefficient of resistance (NTCR) behavior, which reveals the semiconducting behavior of the material. The Mott VRH model could explain the DC electrical conductivity. Both dielectric constant and DC resistivity is well correlated with each other to explain the transport properties in Cr3+ substituted barium hexaferrite.

  9. Regulation of oxidative stress resistance in Campylobacter jejuni, a microaerophilic foodborne pathogen

    Science.gov (United States)

    Kim, Jong-Chul; Oh, Euna; Kim, Jinyong; Jeon, Byeonghwa

    2015-01-01

    Campylobacter jejuni is one of the leading bacterial causes of human gastroenteritis. Due to the increasing rates of human campylobacteriosis, C. jejuni is considered as a serious public health concern worldwide. C. jejuni is a microaerophilic, fastidious bacterium. C. jejuni must overcome a wide range of stress conditions during foodborne transmission to humans, such as food preservation and processing conditions, and even in infection of the gastrointestinal tracts of humans. Particularly, this microaerophilic foodborne pathogen must survive in the atmospheric conditions prior to the initiation of infection. C. jejuni possesses unique regulatory mechanisms for oxidative stress resistance. Lacking OxyR and SoxRS that are highly conserved in other Gram-negative foodborne pathogens, C. jejuni modulates the expression of genes involved in oxidative stress resistance mainly via the peroxide resistance regulator and Campylobacter oxidative stress regulator. Based on recent findings of ours and others, in this review, we described how C. jejuni regulates the expression of oxidative stress defense. PMID:26284041

  10. Nrf2 Improves Leptin and Insulin Resistance Provoked by Hypothalamic Oxidative Stress.

    Science.gov (United States)

    Yagishita, Yoko; Uruno, Akira; Fukutomi, Toshiaki; Saito, Ritsumi; Saigusa, Daisuke; Pi, Jingbo; Fukamizu, Akiyoshi; Sugiyama, Fumihiro; Takahashi, Satoru; Yamamoto, Masayuki

    2017-02-21

    The relationship between loss of hypothalamic function and onset of diabetes mellitus remains elusive. Therefore, we generated a targeted oxidative-stress murine model utilizing conditional knockout (KO) of selenocysteine-tRNA (Trsp) using rat-insulin-promoter-driven-Cre (RIP-Cre). These Trsp-KO (TrspRIPKO) mice exhibit deletion of Trsp in both hypothalamic cells and pancreatic β cells, leading to increased hypothalamic oxidative stress and severe insulin resistance. Leptin signals are suppressed, and numbers of proopiomelanocortin-positive neurons in the hypothalamus are decreased. In contrast, Trsp-KO mice (TrspIns1KO) expressing Cre specifically in pancreatic β cells, but not in the hypothalamus, do not display insulin and leptin resistance, demonstrating a critical role of the hypothalamus in the onset of diabetes mellitus. Nrf2 (NF-E2-related factor 2) regulates antioxidant gene expression. Increased Nrf2 signaling suppresses hypothalamic oxidative stress and improves insulin and leptin resistance in TrspRIPKO mice. Thus, Nrf2 harbors the potential to prevent the onset of diabetic mellitus by reducing hypothalamic oxidative damage. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  11. Trimethylamine N-oxide (TMAO) as a new potential therapeutic target for insulin resistance and cancer

    DEFF Research Database (Denmark)

    Oellgaard, Jens; Winther, Signe Abitz; Hansen, Tobias Schmidt

    2017-01-01

    . METHODS: We review the literature on TMAO as a shared risk factor and/or pathway between insulin resistance and GIC risk and take the reader through the literature of interventions that could reduce formation of TMAO and thereby the risk of insulin resistance and GIC. The purpose of the work......BACKGROUND: The intake of animal products in food has been associated with both the development of insulin resistance and gastrointestinal cancers (GIC). Through the digestion of animal protein and other constituents of animal products, the commensal bacteria in the gut (the gut microbiota) forms...... metabolites that can contribute to the development of both insulin resistance and cancer. Trimethylamine-N-Oxide (TMAO) is such a molecule and has recently drawn a lot of attention as it may be a risk factor for - and a link between - the gut microbiota and cardiovascular and renal disease. Further, TMAO...

  12. The effects of temperature on the crystalline properties and resistant starch during storage of white bread.

    Science.gov (United States)

    Sullivan, William R; Hughes, Jeff G; Cockman, Russell W; Small, Darryl M

    2017-08-01

    Resistant starch (RS) can form during storage of foods, thereby bestowing a variety of potential health benefits. The purpose of the current study has been to determine the influence of storage temperature and time on the crystallinity and RS content of bread. Loaves of white bread were baked and stored at refrigeration, frozen and room temperatures with analysis over a period of zero to seven days. RS determination and X-ray diffraction (XRD) were used to evaluate the influence of storage temperature and time on total crystallinity and RS content. The rate of starch recrystallisation was affected by storage temperature and time, where refrigeration temperatures accelerated RS formation and total crystallinity more than storage time at both frozen and room temperature. A strong statistical model has been established between RS formation in bread and XRD patterns, having a 96.7% fit indicating the potential of XRD to measure RS concentrations. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Novel Functional Changes during Podocyte Differentiation: Increase of Oxidative Resistance and H-Ferritin Expression

    Directory of Open Access Journals (Sweden)

    Emese Bányai

    2014-01-01

    Full Text Available Podocytes are highly specialized, arborized epithelial cells covering the outer surface of the glomerular tuft in the kidney. Terminally differentiated podocytes are unable to go through cell division and hereby they are lacking a key property for regeneration after a toxic injury. Podocytes are long-lived cells but, to date, little is known about the mechanisms that support their stress resistance. Our aim was to investigate whether the well-known morphological changes during podocyte differentiation are accompanied by changes in oxidative resistance in a manner that could support their long-term survival. We used a conditionally immortalized human podocyte cell line to study the morphological and functional changes during differentiation. We followed the differentiation process for 14 days by time-lapse microscopy. During this period nondifferentiated podocytes gradually transformed into large, nonproliferating, frequently multinucleated cells, with enlarged nuclei and opened chromatin structure. We observed that differentiated podocytes were highly resistant to oxidants such as H2O2 and heme when applied separately or in combination, whereas undifferentiated cells were prone to such challenges. Elevated oxidative resistance of differentiated podocytes was associated with increased activities of antioxidant enzymes and H-ferritin expression. Immunohistochemical analysis of normal human kidney specimens revealed that podocytes highly express H-ferritin in vivo as well.

  14. Electrical resistivity of assembled transparent inorganic oxide nanoparticle thin layers: influence of silica, insulating impurities, and surfactant layer thickness.

    Science.gov (United States)

    Bubenhofer, Stephanie B; Schumacher, Christoph M; Koehler, Fabian M; Luechinger, Norman A; Sotiriou, Georgios A; Grass, Robert N; Stark, Wendelin J

    2012-05-01

    The electrical properties of transparent, conductive layers prepared from nanoparticle dispersions of doped oxides are highly sensitive to impurities. Production of cost-effective thin conducting films for consumer electronics often employs wet processing such as spin and/or dip coating of surfactant-stabilized nanoparticle dispersions. This inherently results in entrainment of organic and inorganic impurities into the conducting layer leading to largely varying electrical conductivity. Therefore, this study provides a systematic investigation on the effect of insulating surfactants, small organic molecules and silica in terms of pressure dependent electrical resistivity as a result of different core/shell structures (layer thickness). Application of high temperature flame synthesis gives access to antimony-doped tin oxide (ATO) nanoparticles with high purity. This well-defined starting material was then subjected to representative film preparation processes using organic additives. In addition ATO nanoparticles were prepared with a homogeneous inorganic silica layer (silica layer thickness from 0.7 to 2 nm). Testing both organic and inorganic shell materials for the electronic transport through the nanoparticle composite allowed a systematic study on the influence of surface adsorbates (e.g., organic, insulating materials on the conducting nanoparticle's surface) in comparison to well-known insulators such as silica. Insulating impurities or shells revealed a dominant influence of a tunneling effect on the overall layer resistance. Mechanical relaxation phenomena were found for 2 nm insulating shells for both large polymer surfactants and (inorganic) SiO(2) shells.

  15. Resistive switching properties and physical mechanism of europium oxide thin films

    Energy Technology Data Exchange (ETDEWEB)

    Xie, Wei; Zou, Changwei [School of Physical Science and Technology, Lingnan Normal University, Zhanjiang (China); Bao, Dinghua [State Key Laboratory of Optoelectronic Materials and Technologies, School of Materials Science and Engineering, Sun Yat-Sen University, Guangzhou (China)

    2017-09-15

    A forming-free resistive switching effect was obtained in Pt/Eu{sub 2}O{sub 3}/Pt devices in which the Eu{sub 2}O{sub 3} thin films were fabricated by a chemical solution deposition method. The devices show unipolar resistive switching with excellent switching parameters, such as high resistance ratio (10{sup 7}), stable resistance values (read at 0.2 V), low reset voltage, good endurance, and long retention time (up to 10{sup 4} s). On the basis of the analysis of the current-voltage (I-V) curves and the resistance-temperature dependence, it can be concluded that the dominant conducting mechanisms were ohmic behavior and Schottky emission at low resistance state and high resistance state, respectively. The resistive switching behavior could be explained by the formation and rupture of conductive filament, which is related to the abundant oxygen vacancies generated in the deposition process. This work demonstrates the great potential opportunities of Eu{sub 2}O{sub 3} thin film in resistive switching memory applications, which might possess distinguished properties. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  16. Thermoelectrically-cooled variable-temperature probe

    Science.gov (United States)

    Kelso, R. M.; Richmond, R. G.

    1979-01-01

    Variable-temperature probe for electron spectroscopy requires no cryogenic liquids or resistance heating elements. Device consists of heat sink, probe tip, and nickel-plated copper body which resists oxidation and transfers heat efficiently between tip and heat sink.

  17. CO2 as an Oxidant for High Temperature Reactions

    Directory of Open Access Journals (Sweden)

    Sibudjing eKawi

    2015-03-01

    Full Text Available This paper presents a review on the developments in catalyst technology for the reactions utilizing CO2 for high temperature applications. These include dehydrogenation of alkanes to olefins, the dehydrogenation of ethylbenzene to styrene and finally CO2 reforming of hydrocarbon feedstock (i.e. methane and alcohols. Aspects on the various reaction pathways are also highlighted. The literature on the role of promoters and catalyst development is critically evaluated. Most of the reactions discussed in this review are exploited in industries and related to on-going processes, thus providing extensive data from literature. However some reactions, such as CO2 reforming of ethanol and glycerol which have not reached industrial scale are also reviewed owing to their great potential in terms of sustainability which are essential as energy for the future. This review further illustrates the building-up of knowledge which shows the role of support and catalysts for each reaction and the underlying linkage between certain catalysts which can be adapted for the multiple CO2-related reactions.

  18. A comparative study of microstructure, oxidation resistance, mechanical, and tribological properties of coatings in Mo-B-(N), Cr-B-(N) and Ti-B-(N) systems

    Science.gov (United States)

    Kiryukhantsev-Korneev, F. V.; Novikov, A. V.; Sagalova, T. B.; Petrzhik, M. I.; Levashov, E. A.; Shtansky, D. V.

    2017-11-01

    M-B-(N) ( M = Mo, Cr, Ti) coatings were obtained by the magnetron sputtering of MoB, CrB2, TiB, and TiB2 targets in argon and in gaseous mixtures of argon with nitrogen. The structure and composition of the coatings have been investigated using scanning electron microscopy, glow-discharge optical emission spectroscopy, and X-ray diffraction. The mechanical and tribological properties of the coatings have been determined by nanoindentation, scratch-testing, and ball-on-disk tribological tests. The experiments on estimating the oxidation resistance of coatings were carried out in a temperature range of 600-1000°C. A distinctive feature of TiB2 coatings was their high hardness (61 GPa). The Cr-B-(N) coatings had high maximum oxidation resistance (900°C (CrB2) and 1000°C (Cr-B-N)) and possessed high resistance to the diffusion of elements from the metallic substrate up to a temperature of 1000°C. The Mo-B-N coatings were significantly inferior to the Ti-B-(N) and Cr-B-(N) coatings in their mechanical properties and oxidation resistance, as well as had a tendency to oxidize in air atmosphere after long exposure at room temperature. All of the coatings with nitrogen possessed a low coefficient of friction (in a range of 0.3-0.5) and low relative wear ((0.8-1.2) × 10-6 mm3 N-1 m-1.

  19. A family of glutathione peroxidases contributes to oxidative stress resistance in Candida albicans.

    Science.gov (United States)

    Miramón, Pedro; Dunker, Christine; Kasper, Lydia; Jacobsen, Ilse D; Barz, Dagmar; Kurzai, Oliver; Hube, Bernhard

    2014-04-01

    Candida albicans is a well-adapted human commensal but is also a facultative pathogen that can cause superficial and systemic infections. Its remarkable capacity to thrive within the human host relies on its ability to adapt and respond to the local environment of different niches. C. albicans is able to cope with oxidative stress in a coordinated fashion via upregulation of different protective mechanisms. Here, we unravel the role of a family of glutathione peroxidase (GPx), designated Gpx31, Gpx32, and Gpx33, in oxidative stress resistance. We show that GPx activity in C. albicans is induced upon exposure to peroxides and that this enzymatic activity is required for full resistance to oxidative stress. The GPx activity relies on the presence of GPX31, with no apparent contribution from GPX32 and GPX33 during in vitro short-term (3 h) exposure to peroxides. However, a triple gpx31-33Δ/Δ mutant exhibited a more pronounced sensitivity than a single gpx31Δ/Δ mutant on solid media in the presence of oxidants, suggesting that GPX32 and GPX33 may be involved in long-term adaptation to oxidative stress. Interestingly, reintegration of a single allele of GPX31 was sufficient to restore the wild-type phenotype in both the single and triple mutants. We found that mutants lacking GPX31-33 were more susceptible to killing by phagocytic cells, suggesting that GPxs are required for full resistance to innate immune effector cells. Despite the sensitivity to oxidative stress and phagocytes, these mutants were not affected in their virulence in the chicken embryo model of candidiasis.

  20. Hyperlipidemia induces resistance to PTH bone anabolism in mice via oxidized lipids.

    Science.gov (United States)

    Sage, Andrew P; Lu, Jinxiu; Atti, Elisa; Tetradis, Sotirios; Ascenzi, Maria-Grazia; Adams, Douglas J; Demer, Linda L; Tintut, Yin

    2011-06-01

    In hyperlipidemia, oxidized lipids accumulate in vascular tissues and trigger atherosclerosis. Such lipids also deposit in bone tissues, where they may promote osteoporosis. We found previously that oxidized lipids attenuate osteogenesis and that parathyroid hormone (PTH) bone anabolism is blunted in hyperlipidemic mice, suggesting that osteoporotic patients with hyperlipidemia may develop resistance to PTH therapy. To determine if oxidized lipids account for this PTH resistance, we blocked lipid oxidation products in hyperlipidemic mice with an ApoA-I mimetic peptide, D-4F, and the bone anabolic response to PTH treatment was assessed. Skeletally immature Ldlr(-/-) mice were placed on a high-fat diet and treated with D-4F peptide and/or with intermittent PTH(1-34) injections. As expected, D-4F attenuated serum lipid oxidation products and tissue lipid deposition induced by the diet. Importantly, D-4F treatment attenuated the adverse effects of dietary hyperlipidemia on PTH anabolism by restoring micro-computed tomographic parameters of bone quality-cortical mineral content, area, and thickness. D-4F significantly reduced serum markers of bone resorption but not bone formation. PTH and D-4F, together but not separately, also promoted bone anabolism in an alternative model of hyperlipidemia, Apoe(-/-) mice. In normolipemic mice, D-4F cotreatment did not further enhance the anabolic effects of PTH, indicating that the mechanism is through its effects on lipids. These findings suggest that oxidized lipids mediate hyperlipidemia-induced PTH resistance in bone through modulation of bone resorption. Copyright © 2011 American Society for Bone and Mineral Research.

  1. Photosynthesis of crop plants as influenced by light, carbon dioxide, temperature, and stomatal diffusion resistance

    NARCIS (Netherlands)

    Gaastra, P.

    1959-01-01

    The effect was estimated of light intensity, leaf temperature, and C0 2 concentration on photosynthetic rate in leaves of crop plants. The potential capacities of photochemical and biochemical processes and of C0 2 transport were compared.

    Resistance to C0 2

  2. Dependent of electrical resistivity of thin wire on magnetic field and temperature

    Directory of Open Access Journals (Sweden)

    E. Sadeghi

    2006-03-01

    Full Text Available   Variation of electrical resistivity of Bismuth nanowire versus magnetic field the and temperature are considered. We study the size effect and surface scattering of the carrier in thin wire for systems with ellipsoidal fermi surfaces. Results are in good agreement with experimental points.

  3. Embedded resistance wire as a heating element for temperature control in microbioreactors

    DEFF Research Database (Denmark)

    Zainal Alam, Muhd Nazrul Hisham; Schäpper, Daniel; Gernaey, Krist

    2010-01-01

    . The microbioreactor (working volume of 100 mu L) is designed to work bubble-free, and is fabricated out of the polymers poly(methylmethacrylate) (PMMA) and poly(dimethylsiloxane) (PDMS). The temperature is measured with a Pt 100 sensor, and the resistance wires are embedded in the polymer such that they either...

  4. Copper modified austenitic stainless steel alloys with improved high temperature creep resistance

    Science.gov (United States)

    Swindeman, R.W.; Maziasz, P.J.

    1987-04-28

    An improved austenitic stainless steel that incorporates copper into a base Fe-Ni-Cr alloy having minor alloying substituents of Mo, Mn, Si, T, Nb, V, C, N, P, B which exhibits significant improvement in high temperature creep resistance over previous steels. 3 figs.

  5. Influence of oxidation temperature on the interfacial properties of n-type 4H-SiC MOS capacitors

    Energy Technology Data Exchange (ETDEWEB)

    Jia, Yifan; Lv, Hongliang [School of Microelectronics, Xidian University, Key Laboratory of Wide Band Gap Semiconductor Materials and Devices, Xi’an 710071 (China); Song, Qingwen, E-mail: qwsong@xidian.edu.cn [School of Microelectronics, Xidian University, Key Laboratory of Wide Band Gap Semiconductor Materials and Devices, Xi’an 710071 (China); School of Advanced Materials and Nanotechnology, Xidian University, Xi’an 710071 (China); Tang, Xiaoyan, E-mail: xytang@xidian.edu.cn [School of Microelectronics, Xidian University, Key Laboratory of Wide Band Gap Semiconductor Materials and Devices, Xi’an 710071 (China); Xiao, Li; Wang, Liangyong; Tang, Guangming [Zhongxing Telecommunication Equipment Corporation, Shenzhen 518057 (China); Zhang, Yimen; Zhang, Yuming [School of Microelectronics, Xidian University, Key Laboratory of Wide Band Gap Semiconductor Materials and Devices, Xi’an 710071 (China)

    2017-03-01

    Highlights: • Effect of oxidation temperature on interfacial properties of SiO{sub 2}/SiC is investigated. • Raising the oxidation temperature effectively decreases the density of NITs and N{sub eff}. • The higher oxidation temperature reduces the surface RMS roughness of the grow SiO{sub 2}. • SIMS and XPS results reveal the improvement mechanism of high temperature oxidation. - Abstract: The effect of oxidation temperature on interfacial properties of n-type 4H-SiC metal-oxide-semiconductor capacitors has been systematically investigated. Thermal dry oxidation process with three different oxidation temperatures 1200 °C, 1300 °C and 1350 °C were employed to grow SiO{sub 2} dielectric, following by the standard post-oxidation annealing (POA) in NO ambience at 1175 °C for 2 h. The root mean square (RMS) roughness measured by Atomic Force Microscopy for the thermally grown SiO{sub 2} before POA process is reduced with increasing the oxidation temperature, obtaining an atomically flat surface with a RMS of 0.157 nm from the sample oxidized at 1350 °C. Several kinds of electrical measurements were used to evaluate the densities of near interface traps and effective fixed dielectric charge for the samples, exhibiting a trend reduced with increasing the oxidation temperature. The interface state density of 3 × 10{sup 11} cm{sup −2}eV{sup −1} at 0.2 eV from the conduction band edge was achieved from conductance method measurement for the sample oxidized at 1350 °C. The results from Secondary Ion Mass Spectroscopy and X-ray Photoelectron Spectroscopy demonstrate that high oxidation temperature can reduce the width of transition layer, the excess Si and silicon suboxide compositions near the interface, leading to effective improvement of the interfacial properties.

  6. Developing a theoretical relationship between electrical resistivity, temperature, and film thickness for conductors.

    Science.gov (United States)

    Lacy, Fred

    2011-12-22

    Experimental evidence has made it clear that the size of an object can have an effect on its properties. The electrical resistivity of a thin film will become larger as the thickness of that film decreases in size. Furthermore, the electrical resistivity will also increase as the temperature increases. To help understand these relationships, a model is presented, and equations are obtained to help understand the mechanisms responsible for these properties and to give insight into the underlying physics between these parameters. Comparisons are made between experimental data and values generated from the theoretical equations derived from the model. All of this analysis provides validation for the theoretical model. Therefore, since the model is accurate, it provides insight into the underlying physics that relates electrical resistivity to temperature and film thickness. PACS: 73.61.At; 73.50.Bk; 72.15.Eb; 72.10.d; 63.20.kd.

  7. Absorbed Energy Distribution of Ductile Ni-resist Alloyed Iron Under Instrumented Impact Load at Low Temperatures

    National Research Council Canada - National Science Library

    Ke, Jiang; Yingdong, Qu; Junhua, You; Rongde, Li

    2016-01-01

    In this study, in order to investigate the absorbed energy distribution on the low-temperature impact fracture process of ductile Ni-resist alloyed iron, the low-temperature impact tests of ductile Ni...

  8. Silica Fume Functionalized With Amine-Based Additives as a Modifier to Enhance Asphalt Resistance to Oxidation

    Science.gov (United States)

    Abutalib, Nader Turki

    This dissertation investigates the practical feasibility of functionalizing silica fume particles with the amine groups in Bio-binder and pure APTES chemical to disperse silica fume in asphalt binder matrix to produce silica-fume-modified binder (SFMB). Dispersed silica fume was then introduced to asphalt to reduce oxidative aging. It has been widely reported that asphalt binder oxidation is one of the phenomena that reduces the service life of asphalt pavement by negatively affecting its rheological properties. This in turn can lead to a more brittle pavement, which is more prone to cracks due to thermal stress and traffic loading. It has been shown that the introduction of 4% silica fume to asphalt can reduce asphalt oxidative aging. However, the challenge with a higher percentage of silica fume was found to be the agglomeration of nano- particles to form micro-size clusters, which can reduce the effectiveness of silica fume while making asphalt binder more susceptible to shear. Therefore, this dissertation studies the effectiveness of functionalizing the SFMB to reduce asphalt oxidative aging while alleviating the agglomeration effect. To do so, various percentages of bio-binder (BB) and bio-char (BC) were introduced to SFMB, and the rheological properties and high-temperature performance of each specimen were evaluated by measuring the rotational viscosity and complex shear modulus before and after oxidative aging. It is hypothesized that fine-graded BC and BB with nano- to micro-level particles can be used to reduce asphalt oxidation and create a new generation of low- agglomeration SFMB with higher resistance to oxidative aging. To further study the effects of functionalization on dispersion of silica fume, silica fume particles were produced with different functional groups: amine (APTES) groups and phosphonate (THPMP) groups. Agglomeration studies using a scanning electron microscope and zeta potential analysis indicate that modifying asphalt binder with

  9. Cryptococcus neoformans Yap1 is required for normal fluconazole and oxidative stress resistance.

    Science.gov (United States)

    Paul, Sanjoy; Doering, Tamara L; Moye-Rowley, W Scott

    2015-01-01

    Cryptococcus neoformans is a pathogen that is the most common cause of fungal meningitis. As with most fungal pathogens, the most prevalent clinical antifungal used to treat Cryptococcosis is orally administered fluconazole. Resistance to this antifungal is an increasing concern in treatment of fungal disease in general. Our knowledge of the specific determinants involved in fluconazole resistance in Cryptococcus is limited. Here we report the identification of an important genetic determinant of fluconazole resistance in C. neoformans that encodes a basic region-leucine zipper transcription factor homologous to Saccharomyces cerevisiae Yap1. Expression of a codon-optimized form of the Cn YAP1 cDNA in S. cerevisiae complemented defects caused by loss of the endogenous S. cerevisiae YAP1 gene and activated transcription from a reporter gene construct. Mutant strains of C. neoformans lacking YAP1 were hypersensitive to a range of oxidative stress agents but importantly also to fluconazole. Loss of Yap1 homologues from other fungal pathogens like Candida albicans or Aspergillus fumigatus was previously found to cause oxidant hypersensitivity but had no detectable effect on fluconazole resistance. Our data provide evidence for a unique biological role of Yap1 in wild-type fluconazole resistance in C. neoformans. Copyright © 2014 Elsevier Inc. All rights reserved.

  10. Effective contact resistance of zinc-tin oxide-based thin film transistors.

    Science.gov (United States)

    Kang, Youjin; Han, Dongsuk; Park, Jaehyung; Shin, Sora; Choi, Duckkyun; Park, Jongwan

    2014-11-01

    We investigated different source/drain (S/D) electrode materials in thin-film transistors (TFTs) based on amorphous zinc-tin oxide (ZTO) semiconductors. The transfer length, channel conductance, and effective contact resistance between the S/D electrodes and the a-ZTO channel layer were examined. Total ON resistance (R(T)), transfer length (L(T)) and effective contact resistance (R(c-eff)) were extracted by the well-known transmission-line method (TLM) using a series of TFTs with different channel lengths. When the width of ZTO channel layer was fixed as 50 μm, the lengths were varying from 10 to 50 μm. The channel layer and S/D electrode were defined by lift-off process and for the S/D electrodes, indium-tin oxide (ITO), Cu, and Mo were used. The resistivity and work function values of electrode materials were considered when selected as candidates for S/D electrodes of ZTO-TFTs. The results showed that the ZTO-TFTs with Mo S/D electrodes had the lowest effective contact resistance indicating that ZTO-TFTs with Mo electrodes have better electrical performance compared to others.

  11. A Mutator Phenotype Promoting the Emergence of Spontaneous Oxidative Stress-Resistant Mutants in Campylobacter jejuni.

    Science.gov (United States)

    Dai, Lei; Sahin, Orhan; Tang, Yizhi; Zhang, Qijing

    2017-12-15

    Campylobacter jejuni is a leading cause of foodborne illnesses worldwide. As a microaerophilic organism, C. jejuni must be able to defend against oxidative stress encountered both in the host and in the environment. How Campylobacter utilizes a mutation-based mechanism for adaptation to oxidative stress is still unknown. Here we present a previously undescribed phenotypic and genetic mechanism that promotes the emergence of oxidative stress-resistant mutants. Specifically, we showed that a naturally occurring mutator phenotype, resulting from a loss of function mutation in the DNA repair enzyme MutY, increased oxidative stress resistance (OX R ) in C. jejuni We further demonstrated that MutY malfunction did not directly contribute to the OX R phenotype but increased the spontaneous mutation rate in the peroxide regulator gene perR , which functions as a repressor for multiple genes involved in oxidative stress resistance. Mutations in PerR resulted in loss of its DNA binding function and derepression of PerR-controlled oxidative stress defense genes, thereby conferring an OX R phenotype and facilitating Campylobacter survival under oxidative stress. These findings reveal a new mechanism that promotes the emergence of spontaneous OX R mutants in bacterial organisms. IMPORTANCE Although a mutator phenotype has been shown to promote antibiotic resistance in many bacterial species, little is known about its contribution to the emergence of OX R mutants. This work describes the link between a mutator phenotype and the enhanced emergence of OX R mutants as well as its underlying mechanism involving DNA repair and mutations in PerR. Since DNA repair systems and PerR are well conserved in many bacterial species, especially in Gram positives, the same mechanism may operate in multiple bacterial species. Additionally, we developed a novel method that allows for rapid quantification of spontaneous OX R mutants in a bacterial population. This method represents a technical

  12. Role of Y in the oxidation resistance of CrAlYN coatings

    Energy Technology Data Exchange (ETDEWEB)

    Domínguez-Meister, S.; El Mrabet, S. [Instituto de Ciencia de Materiales de Sevilla (CSIC-Univ. Sevilla), Avda., Américo Vespucio 49, Sevilla 41092 (Spain); Escobar-Galindo, R. [Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Sor Juana Inés de la Cruz 3, Cantoblanco 28049 (Spain); Mariscal, A.; Jiménez de Haro, M.C.; Justo, A. [Instituto de Ciencia de Materiales de Sevilla (CSIC-Univ. Sevilla), Avda., Américo Vespucio 49, Sevilla 41092 (Spain); Brizuela, M. [TECNALIA, Mikeletegui Pasealekua, 2, Donostia-San Sebastián 20009 (Spain); Rojas, T.C. [Instituto de Ciencia de Materiales de Sevilla (CSIC-Univ. Sevilla), Avda., Américo Vespucio 49, Sevilla 41092 (Spain); Sánchez-López, J.C., E-mail: jcslopez@icmse.csic.es [Instituto de Ciencia de Materiales de Sevilla (CSIC-Univ. Sevilla), Avda., Américo Vespucio 49, Sevilla 41092 (Spain)

    2015-10-30

    Highlights: • The oxidation behavior of CrAlYN films (Al < 10 at.%) depends on the Al/Y distribution. • ∼4 at.% Y enhances the oxidation resistance up to 1000 °C of CrAlYN-coated M2 steels. • Controlled inward oxygen diffusion affects positively the film oxidation resistance. • Mixed Al–Y oxides appear to block the diffusion of elements from the substrate. • Yttrium modifies the passivation layer composition by increasing the Al/Cr ratio. - Abstract: CrAlYN coatings with different aluminum (4–12 at.%) and yttrium (2–5 at.%) contents are deposited by d.c. reactive magnetron sputtering on silicon and M2 steel substrates using metallic targets and Ar/N{sub 2} mixtures. The influence of the nanostructure and chemical elemental distribution on the oxidation resistance after heating in air at 1000 °C is studied by means of cross-sectional scanning electron microscopy (X-SEM), energy dispersive X-ray analysis (EDX), X-ray diffraction (XRD) and glow discharge optical emission spectroscopy (GD-OES). The sequential exposure to the metallic targets during the synthesis leads to a multilayer structure where concentration of metallic elements (Cr, Al and Y) is changing periodically. A good oxidation resistance is observed when Al- and Y-rich regions are separated by well-defined CrN layers, maintaining crystalline coherence along the columnar structure. This protective behavior is independent of the type of substrate and corresponds to the formation of a thin mixed (Al, Cr)-oxide scale that protects the film underneath. The GD-OES and XRD analysis have demonstrated that Y acts as a reactive element, blocking the Fe and C atoms diffusion from the steel and favoring higher Al/Cr ratio in the passivation layer after heating. The coating with Y content around 4 at.% exhibited the best performance with a thinner oxide scale, a delay in the CrN decomposition and transformation to Cr{sub 2}N, and a more effective Fe and C blocking.

  13. Cross-Sectional Investigations of Oxide Scale Nanocrystalline FeCr Alloys after High-Temperature Oxidation Test at 900°C

    Science.gov (United States)

    Saryanto, H.; Sebayang, D.; Untoro, P.

    2017-05-01

    The cross-sectional examinations of oxide films formed by oxidation on the surface of FeCr alloys with various crystallite sizes were observed and investigated. X-ray diffraction (XRD) analysis was used to characterize the oxide scale morphology and to identify the phases and oxidation products. Furthermore, Scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDS) have been used to study the cross-sectional oxides produced by specimens after oxidation process. The cross-sectional investigation shows that the oxide scale formed on the surface of FeCr alloys consisted roughly of Cr2O3 with a small amount of FeO mixture. The outward diffusivity of Chromium to form Cr2O3 protective layers vary significantly occurrences on the surface of FeCr alloy with smallest crystallite size (38.51 nm), the scale had an enriched Cr content which improves the adherence of the oxide scale to the substrate, in another word, it increases the oxidation resistance. While the oxide scale formed on the surface of FeCr alloy with largest crystallite sizes (76.60 nm) had an enriched Fe content which reduces the resistance to oxidation, and adherence to the substrate. The thickness of oxide scale formed on nanocrystalline FeCr alloy with smallest crystallite sizes was found around 8 μm thick, which three-time thinner than FeCr alloy with largest crystallite sizes.

  14. Modelling of Dynamic Transmission Cable Temperature Considering Soil-Specific Heat, Thermal Resistivity, and Precipitation

    DEFF Research Database (Denmark)

    Olsen, Rasmus; Anders, George J.; Holboell, Joachim

    2013-01-01

    as functions of the moisture content which is known to vary with time. Furthermore, issues related to the cooling effect during rainy weather are considered. The algorithm is based on the lumped parameters model and takes as input distributed temperature sensing measurements as well as the current and ambient......This paper presents an algorithm for the estimation of the time-dependent temperature evolution of power cables, when real-time temperature measurements of the cable surface or a point within its vicinity are available. The thermal resistivity and specific heat of the cable surroundings are varied...

  15. Electrochemical properties of composite cathodes using Sm doped layered perovskite for intermediate temperature-operating solid oxide fuel cell

    Science.gov (United States)

    Baek, Seung-Wook; Azad, Abul K.; Irvine, John T. S.; Choi, Won Seok; Kang, Hyunil; Kim, Jung Hyun

    2018-02-01

    SmBaCo2O5+d (SBCO) showed the lowest observed Area Specific Resistance (ASR) value in the LnBaCo2O5+d (Ln: Pr, Nd, Sm, and Gd) oxide system for the overall temperature ranges tested. The ASR of a composite cathode (mixture of SBCO and Ce0.9Gd0.1O2-d) on a Ce0.9Gd0.1O2-d (CGO91) electrolyte decreased with respect to the CGO91 content; the percolation limit was also achieved for a 50 wt% SBCO and 50 wt% CGO91 (SBCO50) composite cathode. The ASRs of SBCO50 on the dense CGO91 electrolyte in the overall temperature range of 500-750 °C were relatively lower than those of SBCO50 on the CGO91 coated dense 8 mol% yttria-stabilized zirconia (8YSZ) electrolyte for the same temperature range. From 750 °C and for all higher temperatures tested, however, the ASRs of SBCO50 on the CGO91 coated dense 8YSZ electrolyte were lower than those of the CGO91 electrolyte. The maximum power densities of SBCO50 on the Ni-8YSZ/8YSZ/CGO91 buffer layer were 1.034 W cm-2 and 0.611 W cm-2 at 800 °C and 700 °C.

  16. Models for the Configuration and Integrity of Partially Oxidized Fuel Rod Cladding at High Temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Siefken, L.J.

    1999-01-01

    Models were designed to resolve deficiencies in the SCDAP/RELAP5/MOD3.2 calculations of the configuration and integrity of hot, partially oxidized cladding. These models are expected to improve the calculations of several important aspects of fuel rod behavior. First, an improved mapping was established from a compilation of PIE results from severe fuel damage tests of the configuration of melted metallic cladding that is retained by an oxide layer. The improved mapping accounts for the relocation of melted cladding in the circumferential direction. Then, rules based on PIE results were established for calculating the effect of cladding that has relocated from above on the oxidation and integrity of the lower intact cladding upon which it solidifies. Next, three different methods were identified for calculating the extent of dissolution of the oxidic part of the cladding due to its contact with the metallic part. The extent of dissolution effects the stress and thus the integrity of the oxidic part of the cladding. Then, an empirical equation was presented for calculating the stress in the oxidic part of the cladding and evaluating its integrity based on this calculated stress. This empirical equation replaces the current criterion for loss of integrity which is based on temperature and extent of oxidation. Finally, a new rule based on theoretical and experimental results was established for identifying the regions of a fuel rod with oxidation of both the inside and outside surfaces of the cladding. The implementation of these models is expected to eliminate the tendency of the SCDAP/RELAP5 code to overpredict the extent of oxidation of the upper part of fuel rods and to underpredict the extent of oxidation of the lower part of fuel rods and the part with a high concentration of relocated material. This report is a revision and reissue of the report entitled, Improvements in Modeling of Cladding Oxidation and Meltdown.

  17. Application of Flexible Micro Temperature Sensor in Oxidative Steam Reforming by a Methanol Micro Reformer

    Directory of Open Access Journals (Sweden)

    Yi-Man Lo

    2011-02-01

    Full Text Available Advances in fuel cell applications reflect the ability of reformers to produce hydrogen. This work presents a flexible micro temperature sensor that is fabricated based on micro-electro-mechanical systems (MEMS technology and integrated into a flat micro methanol reformer to observe the conditions inside that reformer. The micro temperature sensor has higher accuracy and sensitivity than a conventionally adopted thermocouple. Despite various micro temperature sensor applications, integrated micro reformers are still relatively new. This work proposes a novel method for integrating micro methanol reformers and micro temperature sensors, subsequently increasing the methanol conversion rate and the hydrogen production rate by varying the fuel supply rate and the water/methanol ratio. Importantly, the proposed micro temperature sensor adequately controls the interior temperature during oxidative steam reforming of methanol (OSRM, with the relevant parameters optimized as well.

  18. Application of Flexible Micro Temperature Sensor in Oxidative Steam Reforming by a Methanol Micro Reformer

    Science.gov (United States)

    Lee, Chi-Yuan; Lee, Shuo-Jen; Shen, Chia-Chieh; Yeh, Chuin-Tih; Chang, Chi-Chung; Lo, Yi-Man

    2011-01-01

    Advances in fuel cell applications reflect the ability of reformers to produce hydrogen. This work presents a flexible micro temperature sensor that is fabricated based on micro-electro-mechanical systems (MEMS) technology and integrated into a flat micro methanol reformer to observe the conditions inside that reformer. The micro temperature sensor has higher accuracy and sensitivity than a conventionally adopted thermocouple. Despite various micro temperature sensor applications, integrated micro reformers are still relatively new. This work proposes a novel method for integrating micro methanol reformers and micro temperature sensors, subsequently increasing the methanol conversion rate and the hydrogen production rate by varying the fuel supply rate and the water/methanol ratio. Importantly, the proposed micro temperature sensor adequately controls the interior temperature during oxidative steam reforming of methanol (OSRM), with the relevant parameters optimized as well. PMID:22319407

  19. Application of flexible micro temperature sensor in oxidative steam reforming by a methanol micro reformer.

    Science.gov (United States)

    Lee, Chi-Yuan; Lee, Shuo-Jen; Shen, Chia-Chieh; Yeh, Chuin-Tih; Chang, Chi-Chung; Lo, Yi-Man

    2011-01-01

    Advances in fuel cell applications reflect the ability of reformers to produce hydrogen. This work presents a flexible micro temperature sensor that is fabricated based on micro-electro-mechanical systems (MEMS) technology and integrated into a flat micro methanol reformer to observe the conditions inside that reformer. The micro temperature sensor has higher accuracy and sensitivity than a conventionally adopted thermocouple. Despite various micro temperature sensor applications, integrated micro reformers are still relatively new. This work proposes a novel method for integrating micro methanol reformers and micro temperature sensors, subsequently increasing the methanol conversion rate and the hydrogen production rate by varying the fuel supply rate and the water/methanol ratio. Importantly, the proposed micro temperature sensor adequately controls the interior temperature during oxidative steam reforming of methanol (OSRM), with the relevant parameters optimized as well.

  20. Monolithic Au/CeO2 nanorod framework catalyst prepared by dealloying for low-temperature CO oxidation

    Science.gov (United States)

    Zhang, Xiaolong; Duan, Dong; Li, Guijing; Feng, Wenjie; Yang, Sen; Sun, Zhanbo

    2018-03-01

    Monolithic Au/CeO2 nanorod frameworks (NFs) with porous structure were prepared by dealloying melt-spun Al89.7Ce10Au0.3 ribbons. After calcination in O2, a 3D Au/CeO2 NF catalyst with large surface area was obtained and used for low-temperature CO oxidation. The small Au clusters/nanoparticles (NPs) were in situ supported and highly dispersed on the nanorod surface, creating many nanoscale contact interfaces. XPS results demonstrated that high-concentration oxygen vacancy and Au δ+/Au0 co-existed in the calcined sample. The Au/CeO2 nanorod catalyst calcined at 400 °C exhibited much higher catalytic activity for CO oxidation compared with the dealloyed sample and bare CeO2 nanorods. Moreover, its complete reaction temperature was as low as 91 °C. The designed Au/CeO2 NF catalyst not only possessed extreme sintering resistance but also exhibited high performance owing to the enhanced interaction between the Au clusters/NPs and CeO2 nanorod during calcination.