WorldWideScience

Sample records for technology validation project

  1. Calibration/Validation Technology for the CO2 Satellite Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We are proposing to develop high altitude CO2 analyzer technology that can be deployed on the research aircraft of NASA's Airborne Science Program (ASP). The...

  2. Instrument validation project

    International Nuclear Information System (INIS)

    Reynolds, B.A.; Daymo, E.A.; Geeting, J.G.H.; Zhang, J.

    1996-06-01

    Westinghouse Hanford Company Project W-211 is responsible for providing the system capabilities to remove radioactive waste from ten double-shell tanks used to store radioactive wastes on the Hanford Site in Richland, Washington. The project is also responsible for measuring tank waste slurry properties prior to injection into pipeline systems, including the Replacement of Cross-Site Transfer System. This report summarizes studies of the appropriateness of the instrumentation specified for use in Project W-211. The instruments were evaluated in a test loop with simulated slurries that covered the range of properties specified in the functional design criteria. The results of the study indicate that the compact nature of the baseline Project W-211 loop does not result in reduced instrumental accuracy resulting from poor flow profile development. Of the baseline instrumentation, the Micromotion densimeter, the Moore Industries thermocouple, the Fischer and Porter magnetic flow meter, and the Red Valve Pressure transducer meet the desired instrumental accuracy. An alternate magnetic flow meter (Yokagawa) gave nearly identical results as the baseline fischer and Porter. The Micromotion flow meter did not meet the desired instrument accuracy but could potentially be calibrated so that it would meet the criteria. The Nametre on-line viscometer did not meet the desired instrumental accuracy and is not recommended as a quantitative instrument although it does provide qualitative information. The recommended minimum set of instrumentation necessary to ensure the slurry meets the Project W-058 acceptance criteria is the Micromotion mass flow meter and delta pressure cells

  3. Ceramic Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

  4. Transformational Tools and Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Transformational Tools and Technologies (TTT) Project advances state-of-the-art computational and experimental tools and technologies that are vital to aviation...

  5. Technology Education Professional Enhancement Project

    Science.gov (United States)

    Hughes, Thomas A., Jr.

    1996-01-01

    The two goals of this project are: the use of integrative field of aerospace technology to enhance the content and instruction delivered by math, science, and technology teachers through the development of a new publication entitled NASA Technology Today, and to develop a rationale and structure for the study of technology, which establishes the foundation for developing technology education standards and programs of the future.

  6. Managing Technology Projects

    Science.gov (United States)

    Booth, Char

    2009-01-01

    This will be my first time authoring this column, and I'm delighted to have the opportunity it presents to explore the intersection of library technology and public services. As the recent title of the 2008 Internet Librarian conference indicates, "Beyond Library 2.0: User-Focused Tools and Technologies," the tide of what for several years has…

  7. Description of the Sandia Validation Metrics Project

    International Nuclear Information System (INIS)

    TRUCANO, TIMOTHY G.; EASTERLING, ROBERT G.; DOWDING, KEVIN J.; PAEZ, THOMAS L.; URBINA, ANGEL; ROMERO, VICENTE J.; RUTHERFORD, BRIAN M.; HILLS, RICHARD GUY

    2001-01-01

    This report describes the underlying principles and goals of the Sandia ASCI Verification and Validation Program Validation Metrics Project. It also gives a technical description of two case studies, one in structural dynamics and the other in thermomechanics, that serve to focus the technical work of the project in Fiscal Year 2001

  8. [Earth Science Technology Office's Computational Technologies Project

    Science.gov (United States)

    Fischer, James (Technical Monitor); Merkey, Phillip

    2005-01-01

    This grant supported the effort to characterize the problem domain of the Earth Science Technology Office's Computational Technologies Project, to engage the Beowulf Cluster Computing Community as well as the High Performance Computing Research Community so that we can predict the applicability of said technologies to the scientific community represented by the CT project and formulate long term strategies to provide the computational resources necessary to attain the anticipated scientific objectives of the CT project. Specifically, the goal of the evaluation effort is to use the information gathered over the course of the Round-3 investigations to quantify the trends in scientific expectations, the algorithmic requirements and capabilities of high-performance computers to satisfy this anticipated need.

  9. Base Flow Model Validation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovation is the systematic "building-block" validation of CFD/turbulence models employing a GUI driven CFD code (RPFM) and existing as well as new data sets to...

  10. Additive Manufacturing Technology Development Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The 3D Printing In Zero-G (3D Print) technology demonstration project is a proof-of-concept test designed to assess the properties of melt deposition modeling...

  11. Photonics: Technology project summary

    Science.gov (United States)

    Depaula, Ramon P.

    1991-01-01

    Photonics involves the use of light (photons) in conjunction with electronics for applications in communications, computing, control, and sensing. Components used in photonic systems include lasers, optical detectors, optical wave guide devices, fiber optics, and traditional electronic devices. The goal of this program is to develop hybrid optoelectronic devices and systems for sensing, information processing, communications, and control. It is hoped that these new devices will yield at least an order of magnitude improvement in performance over existing technology. The objective of the program is to conduct research and development in the following areas: (1) materials and devices; (2) networking and computing; (3) optical processing/advanced pattern recognition; and (4) sensing.

  12. The New Mexico Technology Deployment Pilot Project: A technology reinvestment project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    The New Mexico Technology Deployment Project (NMTDP) has been in operation for slightly more than two years. As one of the original TRP projects, NMTDP had the charter to develop and validate a new model for technology extraction which emphasized focused technology collaboration, early industry involvement, and a strong dual use commercialization and productization emphasis. Taken in total, the first two years of the NMTDP have been exceptionally successful, surpassing the goals of the project. This report describes the accomplishments and evolution of the NMTDP to date and discusses the future potential of the project. Despite the end of federal funding, and a subsequent reduction in level of effort, the project partners are committed to continuation of the project.

  13. Canadian fusion fuels technology project

    International Nuclear Information System (INIS)

    1986-01-01

    The Canadian Fusion Fuels Technology Project was launched in 1982 to coordinate Canada's provision of fusion fuels technology to international fusion power development programs. The project has a mandate to extend and adapt existing Canadian tritium technologies for use in international fusion power development programs. 1985-86 represents the fourth year of the first five-year term of the Canadian Fusion Fuels Technology Project (CFFTP). This reporting period coincides with an increasing trend in global fusion R and D to direct more effort towards the management of tritium. This has resulted in an increased linking of CFFTP activities and objectives with those of facilities abroad. In this way there has been a continuing achievement resulting from CFFTP efforts to have cooperative R and D and service activities with organizations abroad. All of this is aided by the cooperative international atmosphere within the fusion community. This report summarizes our past year and provides some highlights of the upcoming year 1986/87, which is the final year of the first five-year phase of the program. AECL (representing the Federal Government), the Ministry of Energy (representing Ontario) and Ontario Hydro, have given formal indication of their intent to continue with a second five-year program. Plans for the second phase will continue to emphasize tritium technology and remote handling

  14. The Revolutionary Vertical Lift Technology (RVLT) Project

    Science.gov (United States)

    Yamauchi, Gloria K.

    2018-01-01

    The Revolutionary Vertical Lift Technology (RVLT) Project is one of six projects in the Advanced Air Vehicles Program (AAVP) of the NASA Aeronautics Research Mission Directorate. The overarching goal of the RVLT Project is to develop and validate tools, technologies, and concepts to overcome key barriers for vertical lift vehicles. The project vision is to enable the next generation of vertical lift vehicles with aggressive goals for efficiency, noise, and emissions, to expand current capabilities and develop new commercial markets. The RVLT Project invests in technologies that support conventional, non-conventional, and emerging vertical-lift aircraft in the very light to heavy vehicle classes. Research areas include acoustic, aeromechanics, drive systems, engines, icing, hybrid-electric systems, impact dynamics, experimental techniques, computational methods, and conceptual design. The project research is executed at NASA Ames, Glenn, and Langley Research Centers; the research extensively leverages partnerships with the US Army, the Federal Aviation Administration, industry, and academia. The primary facilities used by the project for testing of vertical-lift technologies include the 14- by 22-Ft Wind Tunnel, Icing Research Tunnel, National Full-Scale Aerodynamics Complex, 7- by 10-Ft Wind Tunnel, Rotor Test Cell, Landing and Impact Research facility, Compressor Test Facility, Drive System Test Facilities, Transonic Turbine Blade Cascade Facility, Vertical Motion Simulator, Mobile Acoustic Facility, Exterior Effects Synthesis and Simulation Lab, and the NASA Advanced Supercomputing Complex. To learn more about the RVLT Project, please stop by booth #1004 or visit their website at https://www.nasa.gov/aeroresearch/programs/aavp/rvlt.

  15. Project approach helps technology transfer

    International Nuclear Information System (INIS)

    Walcher, M.W.

    1982-01-01

    The placing of the contract by the National Power Corporation with Westinghouse for the Philippines nuclear power plant (PNPP-1) is described. Maximised use of Philippine contractors under Westinghouse supervision was provided for. Technology transfer is an important benefit of the contract arrangements, since National Power Corporation project management acquires considerable nuclear plant experience during plant construction through consultation with technical personnel. (U.K.)

  16. Progress in Technology Validation of the Next Ion Propulsion System

    Science.gov (United States)

    Benson, Scott W.; Patterson, Michael J.

    2007-01-01

    The NASA's Evolutionary Xenon Thruster (NEXT) ion propulsion system has been in advanced technology development under the NASA In-Space Propulsion Technology project. The highest fidelity hardware planned has now been completed by the government/industry team, including a flight prototype model (PM) thruster, an engineering model (EM) power processing unit, EM propellant management assemblies, a breadboard gimbal, and control unit simulators. Subsystem and system level technology validation testing is in progress. To achieve the objective Technology Readiness Level 6, environmental testing is being conducted to qualification levels in ground facilities simulating the space environment. Additional tests have been conducted to characterize the performance range and life capability of the NEXT thruster. This paper presents the status and results of technology validation testing accomplished to date, the validated subsystem and system capabilities, and the plans for completion of this phase of NEXT development.

  17. Research Projects in Industrial Technology.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration. Industrial Technology Section.

    1990-06-01

    The purpose of this booklet is to briefly describe ongoing and completed projects being carried out by Bonneville Power Administration's (BPA) Industrial Technology Section. In the Pacific Northwest, the industrial sector is the largest of the four consuming sectors. It accounted for thirty-nine percent of the total firm demand in the region in 1987. It is not easy to asses the conservation potential in the industrial sector. Recognizing this, the Northwest Power Planning Council established an objective to gain information on the size, cost, and availability of the conservation resource in the industrial sector, as well as other sectors, in its 1986 Power Plan. Specifically, the Council recommended that BPA operate a research and development program in conjunction with industry to determine the potential costs and savings from efficiency improvements in industrial processes which apply to a wide array of industrial firms.'' The section, composed of multidisciplinary engineers, provides technical support to the Industrial Programs Branch by designing and carrying out research relating to energy conservation in the industrial sector. The projects contained in this booklet are arranged by sector --industrial, utility, and agricultural -- and, within each sector, chronologically from ongoing to completed, with those projects completed most recently falling first. For each project the following information is given: its objective approach, key findings, cost, and contact person. Completed projects also include the date of completion, a report title, and report number.

  18. Delivering construction projects using innovative building technologies

    CSIR Research Space (South Africa)

    Ampofo-Anti, Naalamkai

    2017-07-01

    Full Text Available This paper presents a project delivery model developed for use by public sector clients tasked with using innovative building technologies (IBTs) in lieu of conventional building technologies (CBTs) in the delivery of social infrastructure projects....

  19. Commercial Supersonics Technology Project - Status of Airport Noise

    Science.gov (United States)

    Bridges, James

    2016-01-01

    The Commercial Supersonic Technology Project has been developing databases, computational tools, and system models to prepare for a level 1 milestone, the Low Noise Propulsion Tech Challenge, to be delivered Sept 2016. Steps taken to prepare for the final validation test are given, including system analysis, code validation, and risk reduction testing.

  20. Shippingport station decommissioning project technology transfer program

    International Nuclear Information System (INIS)

    McKernan, M.L.

    1989-01-01

    The US Department of Energy (DOE) Shippingport Station Decommissioning Project (SSDP) decontaminated and dismantled the world's first nuclear-fueled, commercial-size electric power plant. The SSDP programmatic goal direction for technology transfer is documentation of project management and operations experience. The objective is to provide future nuclear facility decommissioning projects with pertinent SSDP performance data for project assessment, planning, and operational implementation. This paper sets out access and availability directions for SSDP technology acquisition. Discusses are technology transfer definition; technology transfer products including topical and other project reports, professional-technical society presentations, other project liaison and media relations, visual documentation, and technology transfer data base; and retrieving SSDP information

  1. Controlled Hydrogen Fleet and Infrastructure Demonstration and Validation Project

    Energy Technology Data Exchange (ETDEWEB)

    Stottler, Gary

    2012-02-08

    General Motors, LLC and energy partner Shell Hydrogen, LLC, deployed a system of hydrogen fuel cell electric vehicles integrated with a hydrogen fueling station infrastructure to operate under real world conditions as part of the U.S. Department of Energy's Controlled Hydrogen Fleet and Infrastructure Validation and Demonstration Project. This technical report documents the performance and describes the learnings from progressive generations of vehicle fuel cell system technology and multiple approaches to hydrogen generation and delivery for vehicle fueling.

  2. How does technological regime affect performance of technology development projects?

    NARCIS (Netherlands)

    Song, Michael; Hooshangi, Soheil; Zhao, Y. Lisa; Halman, Johannes I.M.

    2014-01-01

    In this study, we examine how technological regime affects the performance of technology development projects (i.e., project quality, sales, and profit). Technological regime is defined as the set of attributes of a technological environment where the innovative activities of firms take place.

  3. Shippingport station decommissioning project technology transfer program

    International Nuclear Information System (INIS)

    McKernan, M.L.

    1988-01-01

    US Department of Energy (DOE) Shippingport Station Decommissioning Project (SSDP) decommissioned, decontaminated, and dismantled the world's first, nuclear fueled, commercial size, electric power plant. SSDP programmatic goal direction for technology transfer is documentation of project management and operations experience. Objective is to provide future nuclear facility decommissioning projects with pertinent SSDP performance data for project assessment, planning, and operational implementation. This paper presents a working definition for technology transfer. Direction is provided for access and availability for SSDP technology acquisition

  4. A project manager's primer on data validation

    International Nuclear Information System (INIS)

    Ramos, S.J.

    1991-01-01

    While carrying out their central responsibility of conducting an environmental investigation in a high- quality, timely, and cost-effective manner, project managers also face a significant challenge due to the many inherent uncertainties associated with characterizing and remediating sites. From all aspects and considerations (health and financial risks; and technical, professional, and legal defensibility/credibility), the project manager must minimize the uncertainty associated with making decisions based on environmental data. A key objective for every project manager is to produce sufficient data of known and acceptable quality. In simple terms, the level of confidence in the gathered data directly relates to: (1) the upfront determination of the types and uses of the data needed (which drives the required quality of the data); (2) the ongoing verification that the prescribed methods by which the data are to be obtained and analyzed are being followed; and (3) the validation of the verified data to determine whether the preestablished data quality objectives have been met, therefore making the data adequate for their intended use(s). This paper focuses on the third clement of the equation for data quality, therefore implying that the first two elements (planning and verification) have been accomplished. The open-quotes Who,close quotes open-quotes What,close quotes open-quotes Why,close quotes open-quotes Whenclose quotes and open-quotes Howclose quotes of data validation are discussed in general terms

  5. Small Hydropower Research and Development Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Blackmore, Mo [Near Space Systems, Inc.

    2013-12-06

    The objective of this work was to investigate, develop, and validate the next generation of small hydroturbine generator designs that maximize the energy transfer from flowing water to electrical power generation. What resulted from this effort was the design of a new technology hydroturbine that Near Space Systems (NSS) has named the Star*Stream© Hydroturbine. Using a design that eliminates nearly all of the shortfalls of conventional hydroturbines, the Star*Stream© Hydroturbine employs a new mechanical-to-electrical energy transfer hydro design that operates without lubrication of any kind, and does not introduce foreign chemicals or particulate matter from oil or drive shaft seal degradation into the hydro ecology. In its unique configuration, the Star*Stream© Hydroturbine is nearly environmentally inert, without the negative aspects caused by interrupting the ecological continuity, i.e., disruptions to sedimentation, water quality, habitat changes, human displacement, fish migration, etc., - while it ensures dramatically reduced timeframes to project completion. While a remarkable reduction in LCOE resulting from application of the Star*Stream© Hydroturbine technology has been the core achievement of the this effort, there have been numerous technological breakthroughs from the development effort.

  6. IV&V Project Assessment Process Validation

    Science.gov (United States)

    Driskell, Stephen

    2012-01-01

    The Space Launch System (SLS) will launch NASA's Multi-Purpose Crew Vehicle (MPCV). This launch vehicle will provide American launch capability for human exploration and travelling beyond Earth orbit. SLS is designed to be flexible for crew or cargo missions. The first test flight is scheduled for December 2017. The SLS SRR/SDR provided insight into the project development life cycle. NASA IV&V ran the standard Risk Based Assessment and Portfolio Based Risk Assessment to identify analysis tasking for the SLS program. This presentation examines the SLS System Requirements Review/System Definition Review (SRR/SDR), IV&V findings for IV&V process validation correlation to/from the selected IV&V tasking and capabilities. It also provides a reusable IEEE 1012 scorecard for programmatic completeness across the software development life cycle.

  7. Methane LIDAR Laser Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Fibertek proposes to develop laser technology intended to meet NASA's need for innovative lidar technologies for atmospheric measurements of methane. NASA and the...

  8. Management of Innovative Projects through Agile Technology

    Directory of Open Access Journals (Sweden)

    Radu Bucea-Manea-Tonis

    2014-09-01

    Full Text Available Because of the globalization and the evolution of internet and technologies, nowadays the innovation is associated with open collaboration conducted by a legal framework. The paper analyses the methods that allow a better management for innovative projects and focuses on agile projects within a technological network.

  9. Smart Gun Technology project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, D.R.

    1996-05-01

    The goal of the Smart Gun Technology project is to eliminate the capability of an unauthorized user form firing a law officer`s firearm by implementing user-recognizing-and-authorizing (or {open_quotes}smart{close_quotes}) surety technologies. This project was funded by the National Institute of Justice. This report lists the findings and results of the project`s three primary objectives. First, to find and document the requirements for a smart firearm technology that law enforcement officers will value. Second, to investigate, evaluate, and prioritize technologies that meet the requirements for a law enforcement officer`s smart firearm. Third, to demonstrate and document the most promising technology`s usefulness in models of a smart firearm.

  10. Expert system for economic evaluation of technological projects

    Directory of Open Access Journals (Sweden)

    Bohumil Hlavenka

    2001-01-01

    Full Text Available Apart from the technical level, a basic tool for decision-making and realization of the technical innovation project is also its economic effectiveness. It is assessed by comparing expenses and effects with respect to all-society interests and standards valid in a relevant period for the areas of technology, economy, ecology, safety of work, etc.

  11. VESUB Technology Demonstration: Project Summary

    National Research Council Canada - National Science Library

    Seamon, Alton

    1999-01-01

    The objective of this report is to provide a chronology of project events and an assemblage of critical technical and process issues that played a significant role in the development of the Virtual...

  12. Clean Air Technology Initiative Projects

    Science.gov (United States)

    EPA Pacific Southwest has provided funding to both South Coast AQMD and San Joaquin Valley APCD to help spur early-stage, innovative technologies that need further testing and demonstration prior to deployment and commercialization.

  13. NDE reliability and advanced NDE technology validation

    International Nuclear Information System (INIS)

    Doctor, S.R.; Deffenbaugh, J.D.; Good, M.S.; Green, E.R.; Heasler, P.G.; Hutton, P.H.; Reid, L.D.; Simonen, F.A.; Spanner, J.C.; Vo, T.V.

    1989-01-01

    This paper reports on progress for three programs: (1) evaluation and improvement in nondestructive examination reliability for inservice inspection of light water reactors (LWR) (NDE Reliability Program), (2) field validation acceptance, and training for advanced NDE technology, and (3) evaluation of computer-based NDE techniques and regional support of inspection activities. The NDE Reliability Program objectives are to quantify the reliability of inservice inspection techniques for LWR primary system components through independent research and establish means for obtaining improvements in the reliability of inservice inspections. The areas of significant progress will be described concerning ASME Code activities, re-analysis of the PISC-II data, the equipment interaction matrix study, new inspection criteria, and PISC-III. The objectives of the second program are to develop field procedures for the AE and SAFT-UT techniques, perform field validation testing of these techniques, provide training in the techniques for NRC headquarters and regional staff, and work with the ASME Code for the use of these advanced technologies. The final program's objective is to evaluate the reliability and accuracy of interpretation of results from computer-based ultrasonic inservice inspection systems, and to develop guidelines for NRC staff to monitor and evaluate the effectiveness of inservice inspections conducted on nuclear power reactors. This program started in the last quarter of FY89, and the extent of the program was to prepare a work plan for presentation to and approval from a technical advisory group of NRC staff

  14. Causal Models for Safety Assurance Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Fulfillment of NASA's System-Wide Safety and Assurance Technology (SSAT) project at NASA requires leveraging vast amounts of data into actionable knowledge. Models...

  15. The ITER project technological challenges

    CERN Multimedia

    CERN. Geneva; Lister, Joseph; Marquina, Miguel A; Todesco, Ezio

    2005-01-01

    The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the designer approach and the available technologies are critically discussed. The fourth lecture is devoted to the issue of performance prediction, from a superconducting wire to a large size conductor. The role of scaling laws, self-field, current distribution, voltage-current characteristic and transposition are...

  16. Ceramic technology for advanced heat engines project

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    The Ceramic Technology for Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems in Conservation and Renewable Energy. This project was developed to meet the ceramic technology requirements of the OTT's automotive technology programs. This project is managed by ORNL and is closely coordinated with complementary ceramics tasks funded by other DOE offices, NASA, DoD, and industry. Research is discussed under the following topics; Turbomilling of SiC Whiskers; microwave sintering of silicon nitride; and milling characterization; processing of monolithics; silicon nitride matrix; oxide matrix; silicate matrix; thermal and wear coatings; joining; design; contact interfaces; time-dependent behavior; environmental effects; fracture mechanics; nondestructive evaluation; and technology transfer. References, figures, and tables are included with each topic.

  17. Project inspection using mobile technology - phase II : assessing the impacts of mobile technology on project inspection.

    Science.gov (United States)

    2015-01-01

    As mobile technology becomes widely available and affordable, transportation agencies can use this : technology to streamline operations involved within project inspection. This research, conducted in two : phases, identified opportunities for proces...

  18. Procedure Verification and Validation Toolset Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed research is aimed at investigating a procedure verification and validation toolset, which will allow the engineers who are responsible for developing...

  19. Technology Management on Large Construction Projects

    DEFF Research Database (Denmark)

    Bonke, Sten

    The aim of this text is to discuss and to develop the concept of technology management in relation to the empirical field of construction projects. In the first of the two main sections central theories and their derived assertions concerning technology management criteria are summed up...... Fixed Link construction project. Finally on this basis the concluding remarks are pointing to the main theoretical problems and their practical implementations for the introduction of a technology management discipline in construction....... in a schematic theoretical framework. Hereafter the general characteristics of construction are examined from the point of view of serving as an empirical field for technology management analysis. In the second section the technology management theme is associated with the empirical properties of the Great Belt...

  20. Technology integration project: Environmental Restoration Technologies Department Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Williams, C.V.; Burford, T.D. [Sandia National Labs., Albuquerque, NM (United States). Environmental Restoration Technologies; Allen, C.A. [Tech Reps, Inc., Albuquerque, NM (United States)

    1996-08-01

    Sandia National Laboratories Environmental Restoration Technologies Department is developing environmental restoration technologies through funding form the US Department of Energy`s (DOE`s) Office of Science and Technology. Initially, this technology development has been through the Mixed Waste Landfill Integrated Demonstration (MWLID). It is currently being developed through the Contaminant Plume containment and Remediation Focus Area, the Landfill Stabilization Focus Area, and the Characterization, Monitoring, and Sensor Cross-Cutting Program. This Technology Integration Project (TIP) was responsible for transferring MWLID-developed technologies for routine use by environmental restoration groups throughout the DOE complex and commercializing these technologies to the private sector. The MWLID`s technology transfer/commercialization successes were achieved by involving private industry in development, demonstration, and technology transfer/commercialization activities; gathering and disseminating information about MWLID activities and technologies; and promoting stakeholder and regulatory involvement. From FY91 through FY95, 30 Technical Task Plans (TTPs) were funded. From these TTPs, the MWLID can claim 15 technology transfer/commercialization successes. Another seven technology transfer/commercialization successes are expected. With the changeover to the focus areas, the TIP continued the technology transfer/commercialization efforts begun under the MWLID.

  1. Technology integration project: Environmental Restoration Technologies Department Sandia National Laboratories

    International Nuclear Information System (INIS)

    Williams, C.V.; Burford, T.D.

    1996-08-01

    Sandia National Laboratories Environmental Restoration Technologies Department is developing environmental restoration technologies through funding form the US Department of Energy's (DOE's) Office of Science and Technology. Initially, this technology development has been through the Mixed Waste Landfill Integrated Demonstration (MWLID). It is currently being developed through the Contaminant Plume containment and Remediation Focus Area, the Landfill Stabilization Focus Area, and the Characterization, Monitoring, and Sensor Cross-Cutting Program. This Technology Integration Project (TIP) was responsible for transferring MWLID-developed technologies for routine use by environmental restoration groups throughout the DOE complex and commercializing these technologies to the private sector. The MWLID's technology transfer/commercialization successes were achieved by involving private industry in development, demonstration, and technology transfer/commercialization activities; gathering and disseminating information about MWLID activities and technologies; and promoting stakeholder and regulatory involvement. From FY91 through FY95, 30 Technical Task Plans (TTPs) were funded. From these TTPs, the MWLID can claim 15 technology transfer/commercialization successes. Another seven technology transfer/commercialization successes are expected. With the changeover to the focus areas, the TIP continued the technology transfer/commercialization efforts begun under the MWLID

  2. Canadian Fusion Fuels Technology Project activities report

    International Nuclear Information System (INIS)

    1985-01-01

    The Canadian Fusion Fuels Technology Project was formally established in 1982. The project is directed toward the further development of Canadian capabilities in five major areas: tritium technology, breeder technology, materials technology, equipment development and safety and the environment. The project is funded by three partners - Government of Canada (50%), Ontario Provincial Government (25%) and Ontario Hydro (25%). The fiscal year 1984/85 represents the third year of operation of the project. In 1984/85, 108 contracts were awarded totalling $4 million. Supplementary funding by subcontractors added approximately $1.9 million to the total project value. More than 200 people participated in the technical work involved in the project. Sixteen people were on attachment to foreign facilities for terms ranging from 1 month to 2.5 years. Five patents were applied for including a tritium discrimination monitor, a new radio-chemical tritium separation method, a new variation of fuel cleanup by gas chromatography, a passive tritium permeation system using bimetallic membranes, and a new breeder process using lithium salts dissolved in heavy water

  3. Projection display technologies for the new millennium

    Science.gov (United States)

    Kahn, Frederic J.

    2000-04-01

    Although analog CRTs continue to enable most of the world's electronic projection displays such as US consumer rear projection televisions, discrete pixel (digital) active matrix LCD and DLP reflective mirror array projectors have rapidly created large nonconsumer markets--primarily for business. Recent advances in image quality, compactness and cost effectiveness of digital projectors have the potential to revolutionize major consumer and entertainment markets as well. Digital penetration of the mainstream consumer projection TV market will begin in the hear 2000. By 2005 digital projection HDTVs could take the major share of the consumer HDTV projection market. Digital projection is expected to dominate both the consumer HDTV and the cinema market by 2010, resulting in potential shipments for all projection markets exceeding 10 M units per year. Digital projection is improving at a rate 10X faster than analog CRT projectors and 5X faster than PDP flat panels. Continued rapid improvement of digital projection is expected due to its relative immaturity and due to the wide diversity of technological improvements being pursued. Key technology enablers are the imaging panels, light sources and micro-optics. Market shares of single panel projectors, MEMs panels, LCOS panels and low T p-Si TFT LCD panel variants are expected to increase.

  4. The Canadian Fusion Fuels Technology Project

    International Nuclear Information System (INIS)

    Dautovich, D.P.; Gierszewski, P.J.; Wong, K.Y.; Stasko, R.R.; Burnham, C.D.

    1987-04-01

    The Canadian Fusion Fuels Technology Project (CFFTP) is a national project whose aim is to develop capability in tritium and robotics technologies for application to international fusion development programs. Activities over the first five years have brought substantial interaction with the world's leading projects such as Tokamak Fusion Test Reactor (TFTR), the Joint European Torus (JET), and the Next European Torus (NET), Canadian R and D and engineering services, and hardware are in demand as these major projects prepare for tritium operation leading to the demonstration of energy breakeven around 1990. Global planning is underway for the next generation ignition experiment. It is anticipated this will provide increased opportunity for CFFTP and its contractors among industry, universities and governmental laboratories

  5. Ceramic Technology for Advanced Heat Engines Project

    Energy Technology Data Exchange (ETDEWEB)

    1989-08-01

    The Ceramic Technology for Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Advanced Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially.

  6. Validation of HEDR models. Hanford Environmental Dose Reconstruction Project

    Energy Technology Data Exchange (ETDEWEB)

    Napier, B.A.; Simpson, J.C.; Eslinger, P.W.; Ramsdell, J.V. Jr.; Thiede, M.E.; Walters, W.H.

    1994-05-01

    The Hanford Environmental Dose Reconstruction (HEDR) Project has developed a set of computer models for estimating the possible radiation doses that individuals may have received from past Hanford Site operations. This document describes the validation of these models. In the HEDR Project, the model validation exercise consisted of comparing computational model estimates with limited historical field measurements and experimental measurements that are independent of those used to develop the models. The results of any one test do not mean that a model is valid. Rather, the collection of tests together provide a level of confidence that the HEDR models are valid.

  7. Information Technology in Engineering and Project Management

    Directory of Open Access Journals (Sweden)

    Chien-Ho Ko

    2017-01-01

    Full Text Available Information Technology (IT can be regarded as the use of computers to store, analyze, and manipulate data (Daintith, 2009. With the rapid development of personal computers, IT has been widely applied in nearly every field (Davenport, 2013. This issue presents five papers covering engineering and project management, three of which focus on the application of IT to solve engineering and project management issues, while one presents research into public private partnerships, and another into cash flow forecasting.

  8. A Correlational Study Assessing the Relationships among Information Technology Project Complexity, Project Complication, and Project Success

    Science.gov (United States)

    Williamson, David J.

    2011-01-01

    The specific problem addressed in this study was the low success rate of information technology (IT) projects in the U.S. Due to the abstract nature and inherent complexity of software development, IT projects are among the most complex projects encountered. Most existing schools of project management theory are based on the rational systems…

  9. Ceramic Technology for Advanced Heat Engines Project

    Energy Technology Data Exchange (ETDEWEB)

    1990-08-01

    The Ceramic Technology For Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Advanced Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DOD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. An assessment of needs was completed, and a five year project plan was developed with extensive input from private industry. The objective of the project is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic hearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines.

  10. Technology Cooperation Agreement Pilot Project (TCAPP)

    Energy Technology Data Exchange (ETDEWEB)

    Keegan, P.; Benioff, R.

    1999-10-20

    The Technology Cooperation Agreement Pilot Project (TCAPP) is helping developing countries design and implement actions to attract investment in clean energy technologies that will meet their economic development goals, while mitigating greenhouse gas emissions. TCAPP was launched by three US government agencies -- the US Agency for International Development (USAID), the US Environmental Protection Agency (USEPA), and the US Department of Energy (USDOE) -- in August 1997 to establish a model for climate change technology cooperation with developing and transition countries. This report describes the TCAPP approach and the significant progress made by the participating countries.

  11. Proceedings of the first annual Nuclear Criticality Safety Technology Project

    International Nuclear Information System (INIS)

    Rutherford, D.A.

    1994-09-01

    This document represents the published proceedings of the first annual Nuclear Criticality Safety Technology Project (NCSTP) Workshop, which took place May 12--14, 1992, in Gaithersburg, Md. The conference consisted of four sessions, each dealing with a specific aspect of nuclear criticality safety issues. The session titles were ''Criticality Code Development, Usage, and Validation,'' ''Experimental Needs, Facilities, and Measurements,'' ''Regulation, Compliance, and Their Effects on Nuclear Criticality Technology and Safety,'' and ''The Nuclear Criticality Community Response to the USDOE Regulations and Compliance Directives.'' The conference also sponsored a Working Group session, a report of the NCSTP Working Group is also presented. Individual papers have been cataloged separately

  12. JUPITER PROJECT - MERGING INVERSE PROBLEM FORMULATION TECHNOLOGIES

    Science.gov (United States)

    The JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) project seeks to enhance and build on the technology and momentum behind two of the most popular sensitivity analysis, data assessment, calibration, and uncertainty analysis programs used in envi...

  13. Ceramic technology for Advanced Heat Engines Project

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1991-07-01

    Significant accomplishments in fabricating ceramic components for advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and database and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. An assessment of needs was completed, and a five year project plan was developed with extensive input from private industry. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. This project is managed by ORNL for the Office of Transportation Technologies, Office of Transportation Materials, and is closely coordinated with complementary ceramics tasks funded by other DOE offices, NASA, DOD, and industry.

  14. Geospatial Technologies: Real Projects in Real Classrooms

    Science.gov (United States)

    Kolvoord, Bob

    2008-01-01

    Geospatial technologies of geographic information systems, global positioning systems, and remote sensing are just a few of the projects that evoke an unexpected drive and devotion from high school students in Virginia. Their integration into different curricular areas lets students focus on understanding their community and the many issues that…

  15. Ceramic Technology For Advanced Heat Engines Project

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. The objective of the project is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. This advanced materials technology is being developed in parallel and close coordination with the ongoing DOE and industry proof of concept engine development programs. To facilitate the rapid transfer of this technology to U.S. industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. Abstracts prepared for appropriate papers.

  16. Accelerators for the advanced radiation technology project

    International Nuclear Information System (INIS)

    Maruyama, Michio

    1990-01-01

    Ion beam irradiation facilities are now under construction for the advanced radiation technology (ART) project in Takasaki Radiation Chemistry Research Establishment of (Japan Atomic Energy Research Institute) JAERI. The project is intended to make an effective use of ion beams, especially ion beams, in the research field of radiation application technology. The TIARA (Takasaki Ion Accelerators for Advanced Radiation Application) facilities include four ion accelerators to produce almost all kinds of energetic ions in the periodic table. The facilities are also provided with several advanced irradiation means and act as very powerful accelerator complex for material development. Specifically, this report presents an outline of the ART project, features of TIARA as accelerator facilities dedicated to material development, the AVF cyclotron under construction (Sumitomo Heavy Industries, Ltd., Model 930), tandem accelerator, microbeam, and experimental instruments used. (N.K.)

  17. Biologically inspired technologies in NASA's morphing project

    Science.gov (United States)

    McGowan, Anna-Maria R.; Cox, David E.; Lazos, Barry S.; Waszak, Martin R.; Raney, David L.; Siochi, Emilie J.; Pao, S. Paul

    2003-07-01

    For centuries, biology has provided fertile ground for hypothesis, discovery, and inspiration. Time-tested methods used in nature are being used as a basis for several research studies conducted at the NASA Langley Research Center as a part of Morphing Project, which develops and assesses breakthrough vehicle technologies. These studies range from low drag airfoil design guided by marine and avian morphologies to soaring techniques inspired by birds and the study of small flexible wing vehicles. Biology often suggests unconventional yet effective approaches such as non-planar wings, dynamic soaring, exploiting aeroelastic effects, collaborative control, flapping, and fibrous active materials. These approaches and other novel technologies for future flight vehicles are being studied in NASA's Morphing Project. This paper will discuss recent findings in the aeronautics-based, biologically-inspired research in the project.

  18. Financing innovative technologies in wind projects

    International Nuclear Information System (INIS)

    Vaughan, C.

    2006-01-01

    Methods of market entry and the financing of new technologies were discussed from the perspective of Clipper Windpower, a wind energy company based in the northeastern United States and Canada. Many new technology companies only consider private equity when seeking financing for new product development. However, financing for projects and products is only the first step to market entry. Wind projects are the financial equivalent of a high yield bond with mechanical risk. Many wind power projects with company equity can also be seen as a long term bond with upside in any given year. It is therefore important for wind developers to seek out strategic buyers for both product development and project development, in addition to finding sources of private equity. Clipper Windpower Inc. has developed a partnership with British Petroleum (BP), who hold an equity interest in the company. Both companies are now partnering on projects with Clipper turbines, and firm orders are in place for 2007 and 2008. As a result of the partnership, Clipper now has increased its financial strength in cash flows, balance sheets, and projected revenue. It was concluded that a successful partnership can increase the scale of wind power development, and bring financial sophistication to smaller companies with limited resources. refs., tabs., figs

  19. How Developments in Psychology and Technology Challenge Validity Argumentation

    Science.gov (United States)

    Mislevy, Robert J.

    2016-01-01

    Validity is the sine qua non of properties of educational assessment. While a theory of validity and a practical framework for validation has emerged over the past decades, most of the discussion has addressed familiar forms of assessment and psychological framings. Advances in digital technologies and in cognitive and social psychology have…

  20. Tool for Validation Software Projects in Programming Labs

    Directory of Open Access Journals (Sweden)

    Antonio J. Sierra

    2012-04-01

    Full Text Available This work shows a testing tool used in Fundamentals of Programming II laboratory in Telecommunication Technologies Engineering Degree at University of Sevilla to check the student project. This tool allows students to test the proper operation of their project in autonomous way. This is a flexible and useful tool for testing the project because the tool identifies when the student has carried out a project that meet the given specifications of the project. This implies a high rate of success when the student delivers its project.

  1. Building Technologies Program Multi-Year Program Plan Technology Validation and Market Introduction 2008

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-01-01

    Building Technologies Program Multi-Year Program Plan 2008 for technology validation and market introduction, including ENERGY STAR, building energy codes, technology transfer application centers, commercial lighting initiative, EnergySmart Schools, EnergySmar

  2. Supporting Project Work with Information Technology

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2015-01-01

    activities. The second is to direct student use of ICT in terms of making systems available and teaching academic computing. The third challenge is to supervise and conduct project work online and in blended learning environments. Finally, one must find a way to exploit the potentials of ICT in problem...... University problem-oriented project work is based. However, in implementing and integrating the new technologies in academic practices, a number of challenges have had to be addressed. This chapter discusses four of these challenges. The first is to provide a physical and virtual framework for learning...

  3. Supporting Project Work with Information Technology

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2015-01-01

    Like so many other institutions, Roskilde University has had to adapt to the new realities brought about by the rapid developments in information and communication technology (ICT). On the whole, ICT tools have proven to be helpful in supporting and developing the work forms on which Roskilde...... University problem-oriented project work is based. However, in implementing and integrating the new technologies in academic practices, a number of challenges have had to be addressed. This chapter discusses four of these challenges. The first is to provide a physical and virtual framework for learning...

  4. The Plasma Hearth Process Technology Development Project

    International Nuclear Information System (INIS)

    Geimer, R.; Batdorf, J.; Wolfe, P.

    1993-01-01

    The US DOE Office of Technology Development (OTD) is currently evaluating the Plasma Hearth Process (PHP) for potential treatment of several DOE waste types. The PHP is a high-temperature vitrification process that has potential application for a wide range of mixed waste types in both the low-level and transuranic mixed waste categories. The PHP is being tested under both the OTD Mixed Waste Integrated Program and the Buried Waste Integrated Demonstration. Initial testing has been completed on several different surrogate waste forms that are representative of some of the DOE mixed waste streams. Destruction of organic material exceeds that of conventional incineration technologies. The vitrified residual has leaching characteristics comparable to glass formulations produced in the high-level waste program. The first phase of the PHP demonstration project has been successfully completed, and the project is currently beginning a comprehensive second phase of development and testing

  5. Manufacturing Methods and Technology Project Summary Reports.

    Science.gov (United States)

    1983-12-01

    to be not feasible. _ Inductoslag Remelting - The effect of the layering of the chips in the molten salt could not be overcome irrespective of long...Manufacturing ME-20 Processes for Depleted Uranium Large Caliber Armor Defeating Projectiles *_o" "-g _ "...• %...- "% "%’.-- % U W C . . C...TECHNOLOGY PROJICT SUIUARY R -PO RT (iCS DROIT-302) MMT Projects 576, 77, 78, and 79 6634 titled "Manufacturing Processes for Depleted Uranium Large

  6. Manufacturing Methods and Technology Project Summary Reports.

    Science.gov (United States)

    1980-12-01

    sulfuric acid with organic modifiers were examined. Aluminum alloys which were processed included the 1100, 2024, 3003, 5052 , 6061, and 7075 series. The...and 772 3500 - Extrusion Technology for High 156 Strength Aluminum Bridge Deck Components Project E75 3552 - Improved Aluminum Alloy Welding Filler...that a 7075-type aluminum alloy which was much tougher than commercially available alloys , could be produced using a certain thermal-mechanical

  7. MHD heat and seed recovery technology project

    Energy Technology Data Exchange (ETDEWEB)

    Petrick, M.; Johnson, T. R.

    1980-08-01

    The MHD Heat and Seed Recovery Technology Project at Argonne National Laboratory is obtaining information for the design and operation of the steam plant downstream of the MHD channel-diffuser, and of the seed regeneration process. The project goal is to supply the engineering data required in the design of components for prototype and demonstration MHD facilities. The work is being done in close cooperation with the Heat Recovery-Seed Recovery facility, which will be a 20-MW pilot plant of the MHD steam bottoming system. The primary effort of the HSR Technology Project is directed toward experimental investigations of critical issues, such as 1) NO/sub x/ behavior in the radiant boiler and secondary combustor; 2) radiant boiler design to meet the multiple requirements of steam generation, NO/sub x/ decomposition, and seed slag separation; 3) effects of solid or liquid seed deposits on heat transfer and gas flow in the steam and air heaters; 4) formation, growth, and deposition of seed-slag particles, 5) character of the combustion gas effluents, and 6) the corrosion and erosion of ceramic and metallic materials of construction. These investigations are performed primarily in a 2-MW test facility, Argonne MHD Process Engineering Laboratory (AMPEL). Other project activities are related to studies of the thermochemistry of the seed-slag combustion gas system, identification of ceramic and metallic materials for service in the MHD-steam plant, and evaluation of seed regeneration processes. Progress is reported.

  8. Advanced Turbine Technology Applications Project (ATTAP)

    Science.gov (United States)

    1994-01-01

    Reports technical effort by AlliedSignal Engines in sixth year of DOE/NASA funded project. Topics include: gas turbine engine design modifications of production APU to incorporate ceramic components; fabrication and processing of silicon nitride blades and nozzles; component and engine testing; and refinement and development of critical ceramics technologies, including: hot corrosion testing and environmental life predictive model; advanced NDE methods for internal flaws in ceramic components; and improved carbon pulverization modeling during impact. ATTAP project is oriented toward developing high-risk technology of ceramic structural component design and fabrication to carry forward to commercial production by 'bridging the gap' between structural ceramics in the laboratory and near-term commercial heat engine application. Current ATTAP project goal is to support accelerated commercialization of advanced, high-temperature engines for hybrid vehicles and other applications. Project objectives are to provide essential and substantial early field experience demonstrating ceramic component reliability and durability in modified, available, gas turbine engine applications; and to scale-up and improve manufacturing processes of ceramic turbine engine components and demonstrate application of these processes in the production environment.

  9. Empirical research methods for technology validation: Scaling up to practice

    NARCIS (Netherlands)

    Wieringa, Roelf J.

    tBefore technology is transferred to the market, it must be validated empirically by simulating future prac-tical use of the technology. Technology prototypes are first investigated in simplified contexts, and thesesimulations are scaled up to conditions of practice step by step as more becomes

  10. Elaboration and validation of an assistive technology assessment questionnaire

    Directory of Open Access Journals (Sweden)

    Fernanda Jorge Guimarães

    2015-06-01

    Full Text Available Assistive Technologies consists of resources, methods, and strategies favoring autonomy and inclusion of elderly and people with disabilities, being scarce in the literature instruments assessing them. A methodology study conducted with a panel of specialists and people with visual impairment, aimed to elaborate and validate a questionnaire to assess educational assistive technology. To consider an item as valid, we used 80% as agreement percentage, and validity and reliability of the questionnaire were calculated. Assistive Technology was characterized in six attributes: objectives, access, clarity, structure and presentation, relevance and efficacy, interactivity, and 19 items were elaborated to compose the questionnaire. From those, 11 obtained percentages higher than 80%, seven were modified and one was excluded. The instrument Cronbach’s alpha was 0,822, guaranteeing validity and reliability of the tool to assess health education Assistive Technology, and therefore, its use is indicated.

  11. Technology Validation: Fuel Cell Bus Evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, Leslie [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-01-02

    This presentation describing the FY 2016 accomplishments for the National Renewable Energy Laboratory's Fuel Cell Bus Evaluations project was presented at the U.S. Department of Energy Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting, June 7, 2016.

  12. Information technology project risk management in Peru

    OpenAIRE

    Del Carpio Gallegos, Javier

    2014-01-01

    This article shows how some principles, uses, and practices of risk management are applied in information technology projects in Peru; in the last four years, in representative sectors like manufacturing, banking, information and communications, academics institutions, construction, government, consulting, services, and others. El presente artículo muestra algunos principios, usos y prácticas de cómo la gestión de riesgos de proyectos de tecnología se ha llevado a cabo en los últimos cuatr...

  13. CCS TECHNOLOGY: OVERVIEW OF PROJECTS, TECHNOLOGY AND MONITORING

    Directory of Open Access Journals (Sweden)

    Nediljka Gaurina-Međimurec

    2018-01-01

    Full Text Available Carbon capture and storage (CCS in terms of geological sequestration presents the process of capturing CO2 from large point sources, transporting it to a storage site, and depositing it into an underground geological formation. In addition to ecological benefits, underground injection of CO2 shows certain potential risks associated with unwanted migration of CO2 to groundwater and surface, so the possibility of carrying out such projects depends on the possibility of reducing mentioned risks to an acceptable level. For this purpose, a detailed risk assessment and analysis must be carried out, serving as the basis for a monitoring plan. Well designed and implemented monitoring plan and program provide important data on site integrity, well injectivity, and entire storage complex performance. This paper gives the overview of large scale and pilot projects of CO2 capture and geological storage in operation, under construction and in the phase of development all over the world, technology basics and available monitoring techniques. An example of CCS project monitoring is given through the monitoring program of the Lacq pilot project in France

  14. A Validity Study of Two Projective Object Representations Measures.

    Science.gov (United States)

    Hibbard, Stephen; And Others

    1995-01-01

    Two projective measures of object representations, the Concept of the Object on the Rorschach and the Social Cognition and Object Relations Scales, were compared with each other and measures of intelligence and pathology with 15 children and 94 adult patients. Results support the construct validity of object representations. (SLD)

  15. Workplace Factors That Shape Information Technology Project Success

    Science.gov (United States)

    Nguyen, Dan Schilling

    2013-01-01

    Information technology (IT) project success depends on having a project manager with effective decision making, leadership, and project management skills. Project success also depends on completing the project in a given budget, time, and scope. Despite these critical qualities of a successful project manager, little research has explored the…

  16. Validating Advanced Supply-Chain Technology (VAST)

    Science.gov (United States)

    2004-06-01

    Use philosophy that is so important in today’s procurement environment. Electronic Data Interchange (EDI) and eCommerce is proving to be a major...the STEPwise methodology are particularly encouraging. These new EDI and eCommerce technologies are becoming more important with the customers who...critical assumption is based upon the 55 fact that eCommerce is growing throughout the commercial and military sector and those who are not

  17. Venture Leaders Prize for innovative technology projects

    CERN Document Server

    2006-01-01

    In co-operation with the GEBERT RÜF FOUNDATION and the Ernest & Young Entrepreneur of the Year Award, venturelab will be presenting the Venture Leaders Prize. The Venture Leaders Prize, which is the new guise of the NETS (New Entrepreneurs in Technology and Science) Prize, will give twenty research entrepreneurs with projects to develop innovative technologies the opportunity to win the chance of participating in a programme to assist them in starting up their companies. The winners will go to spend 10 days in the Boston area (United States) where they will take part in a development programme for their project, which will include an entrepreneurship course, opportunities to meet start-up companies and financing experts, etc. This prize has already spawned many companies such as id Quantique, Selexis or ABMI which have contributed to the economic development of regions, particularly in French-speaking Switzerland. The competition is open to students and scientists from all fields, who would like to s...

  18. Overview and Summary of the Advanced Mirror Technology Development Project

    Science.gov (United States)

    Stahl, H. P.

    2014-01-01

    Advanced Mirror Technology Development (AMTD) is a NASA Strategic Astrophysics Technology project to mature to TRL-6 the critical technologies needed to produce 4-m or larger flight-qualified UVOIR mirrors by 2018 so that a viable mission can be considered by the 2020 Decadal Review. The developed mirror technology must enable missions capable of both general astrophysics & ultra-high contrast observations of exoplanets. Just as JWST’s architecture was driven by launch vehicle, a future UVOIR mission’s architectures (monolithic, segmented or interferometric) will depend on capacities of future launch vehicles (and budget). Since we cannot predict the future, we must prepare for all potential futures. Therefore, to provide the science community with options, we are pursuing multiple technology paths. AMTD uses a science-driven systems engineering approach. We derived engineering specifications for potential future monolithic or segmented space telescopes based on science needs and implement constraints. And we are maturing six inter-linked critical technologies to enable potential future large aperture UVOIR space telescope: 1) Large-Aperture, Low Areal Density, High Stiffness Mirrors, 2) Support Systems, 3) Mid/High Spatial Frequency Figure Error, 4) Segment Edges, 5) Segment-to-Segment Gap Phasing, and 6) Integrated Model Validation Science Advisory Team and a Systems Engineering Team. We are maturing all six technologies simultaneously because all are required to make a primary mirror assembly (PMA); and, it is the PMA’s on-orbit performance which determines science return. PMA stiffness depends on substrate and support stiffness. Ability to cost-effectively eliminate mid/high spatial figure errors and polishing edges depends on substrate stiffness. On-orbit thermal and mechanical performance depends on substrate stiffness, the coefficient of thermal expansion (CTE) and thermal mass. And, segment-to-segment phasing depends on substrate & structure stiffness

  19. Canadian Fusion Fuels Technology Project annual report 93/94

    International Nuclear Information System (INIS)

    1994-01-01

    The Canadian Fusion Fuels Technology Project exists to develop fusion technologies and apply them worldwide in today's advanced fusion projects and to apply these technologies in fusion and tritium research facilities. CFFTP concentrates on developing capability in fusion fuel cycle systems, in tritium handling technologies and in remote handling. This is an annual report for CFFTP and as such also includes a financial report

  20. An evaluation approach for research project pilot technological applications

    Science.gov (United States)

    Marcelino-Jesus, Elsa; Sarraipa, Joao; Jardim-Goncalves, Ricardo

    2013-10-01

    In a world increasingly more competitive and in a constantly development and growth it's important that companies have economic tools, like frameworks to help them to evaluate and validate the technology development to better fits in each company particular needs. The paper presents an evaluation approach for research project pilot applications to stimulate its implementation and deployment, increasing its adequacy and acceptance to their stakeholders and consequently providing new business profit and opportunities. Authors used the DECIDE evaluation framework as a major guide to this approach, which was tested in the iSURF project to support the implementation of an interoperability service utility for collaborative supply chain planning across multiple domains supported by RFID devices.

  1. AGT (Advanced Gas Turbine) technology project

    Science.gov (United States)

    1988-01-01

    An overall summary documentation is provided for the Advanced Gas Turbine Technology Project conducted by the Allison Gas Turbine Division of General Motors. This advanced, high risk work was initiated in October 1979 under charter from the U.S. Congress to promote an engine for transportation that would provide an alternate to reciprocating spark ignition (SI) engines for the U.S. automotive industry and simultaneously establish the feasibility of advanced ceramic materials for hot section components to be used in an automotive gas turbine. As this program evolved, dictates of available funding, Government charter, and technical developments caused program emphases to focus on the development and demonstration of the ceramic turbine hot section and away from the development of engine and powertrain technologies and subsequent vehicular demonstrations. Program technical performance concluded in June 1987. The AGT 100 program successfully achieved project objectives with significant technology advances. Specific AGT 100 program achievements are: (1) Ceramic component feasibility for use in gas turbine engines has been demonstrated; (2) A new, 100 hp engine was designed, fabricated, and tested for 572 hour at operating temperatures to 2200 F, uncooled; (3) Statistical design methodology has been applied and correlated to experimental data acquired from over 5500 hour of rig and engine testing; (4) Ceramic component processing capability has progressed from a rudimentary level able to fabricate simple parts to a sophisticated level able to provide complex geometries such as rotors and scrolls; (5) Required improvements for monolithic and composite ceramic gas turbine components to meet automotive reliability, performance, and cost goals have been identified; (6) The combustor design demonstrated lower emissions than 1986 Federal Standards on methanol, JP-5, and diesel fuel. Thus, the potential for meeting emission standards and multifuel capability has been initiated

  2. The Columbia River Protection Supplemental Technologies Quality Assurance Project Plan

    Energy Technology Data Exchange (ETDEWEB)

    Fix, N. J.

    2008-03-12

    Pacific Northwest National Laboratory researchers are working on the Columbia River Protection Supplemental Technologies Project. This project is a U. S. Department of Energy, Office of Environmental Management-funded initiative designed to develop new methods, strategies, and technologies for characterizing, modeling, remediating, and monitoring soils and groundwater contaminated with metals, radionuclides, and chlorinated organics. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by the Technologies Project staff.

  3. The European Food Consumption Validation Project: conclusions and recommendations

    DEFF Research Database (Denmark)

    de Boer, E. J.; Slimani, N.; van 't Veer, P.

    2011-01-01

    Background/Objectives: To outline and discuss the main results and conclusions of the European Food Consumption Validation (EFCOVAL) Project. Subjects/Methods: The EFCOVAL Project was carried out within the EU Sixth Framework Program by researchers in 11 EU countries. The activities focused on (1......) the further development of the EPIC-Soft software (the software developed to conduct 24-h dietary recalls (24-HDRs) in the European Prospective Investigation into Cancer and Nutrition (EPIC) Study) and the validation of the 2-day non-consecutive 24-HDR method using EPIC-Soft, (2) defining and investigating...... showed that two non-consecutive EPIC-Soft 24-HDRs are suitable to estimate the usual intake distributions of protein and potassium of European adult populations. The 2-day non-consecutive 24-HDRs in combination with a food propensity questionnaire also appeared to be appropriate to rank individuals...

  4. Spent Nuclear Fuel (SNF) Project Design Verification and Validation Process

    International Nuclear Information System (INIS)

    OLGUIN, L.J.

    2000-01-01

    This document provides a description of design verification and validation activities implemented by the Spent Nuclear Fuel (SNF) Project. During the execution of early design verification, a management assessment (Bergman, 1999) and external assessments on configuration management (Augustenburg, 1999) and testing (Loscoe, 2000) were conducted and identified potential uncertainties in the verification process. This led the SNF Chief Engineer to implement corrective actions to improve process and design products. This included Design Verification Reports (DVRs) for each subproject, validation assessments for testing, and verification of the safety function of systems and components identified in the Safety Equipment List to ensure that the design outputs were compliant with the SNF Technical Requirements. Although some activities are still in progress, the results of the DVR and associated validation assessments indicate that Project requirements for design verification are being effectively implemented. These results have been documented in subproject-specific technical documents (Table 2). Identified punch-list items are being dispositioned by the Project. As these remaining items are closed, the technical reports (Table 2) will be revised and reissued to document the results of this work

  5. Clean Coal Technology Programs: Completed Projects (Volume 2)

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2003-12-01

    Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  6. 30 CFR 402.11 - Technology-development project applications.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Technology-development project applications... RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Application, Evaluation, and Management Procedures § 402.11 Technology-development project applications. (a) Grant awards will be used to...

  7. Project Mechanisms and Technology Diffusion in Climate Policy - Kyoto project mechanisms and technology diffusion

    International Nuclear Information System (INIS)

    Glachant, M.; Meniere, Y.

    2010-01-01

    The paper deals with the diffusion of GHG mitigation technologies in developing countries. We develop a model where an abatement technology is progressively adopted by firms and we use it to compare the Clean Development Mechanism (CDM) with a standard Cap and Trade scheme (C and T). In the presence of learning spillovers, we show that the CDM yields a higher social welfare than C and T if the first adopter receives CDM credits whereas the followers do not. This result lends support to the policy proposal of relaxing the CDM additionality constraint for projects which generate significant learning externalities. (authors)

  8. Development and Validation of a Project Package for Junior Secondary School Basic Science

    Science.gov (United States)

    Udofia, Nsikak-Abasi

    2014-01-01

    This was a Research and Developmental study designed to develop and validate projects for Junior Secondary School Basic Science instruction and evaluation. The projects were developed using the project blueprint and sent for validation by experts in science education and measurement and evaluation; using a project validation scale. They were to…

  9. Maturity and Performance in Information Technology Project Management

    OpenAIRE

    Renato de Oliveira Moraes; Fernando José Barbin Laurindo

    2013-01-01

    This study concerns the relationship between the information technology (IT) project performance and the project management maturity of an organization. The research was developed from a survey of 185 respondents during 2010. Project performance was evaluated using the two first dimensions proposed by Shenhar et al (2001) – project efficiency and impact on the customer. Project management maturity was evaluated using the formalization level of project management processes described in PMBoK. ...

  10. Academic Training: The ITER project: technological challenges

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 31 May, 1, 2, 3, June from 11:00 to 12:00 on 31 May and 2, 3, June. From 10:00 to 12:00 on 1 June - Main Auditorium, bldg. 500 The ITER project: technological challenges J. LISTER / CRPP-EPFL, Lausanne, CH and P. BRUZZONE / CRPP-EPFL, Zürich, CH The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the...

  11. Academic Training: The ITER project: technological challenges

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 31 May, 1, 2, 3, June from 11:00 to 12:00 on 31 May and 2, 3, June. From 10:00 to 12:00 on 1 June - Main Auditorium, bldg. 500 The ITER project: technological challenges J. LISTER / CRPP-EPFL, Lausanne and P. BRUZZONE / CRPP-EPFL, Zürich The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the de...

  12. Nuclear Systems (NS): Technology Demonstration Unit (TDU) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Nuclear Systems Project demonstrates nuclear power technology readiness to support the goals of NASA’s Space Technology Mission Directorate. To this end,...

  13. Solid State Electrolyte for Li Battery Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration —  The fabrication technology developed in this project will aid GRC in advancing  Lithium Ion Batteries (LIB) technology by developing new electrode and SSE...

  14. Proceedings of the nuclear criticality technology safety project

    International Nuclear Information System (INIS)

    Sanchez, R.G.

    1997-06-01

    This document contains summaries of the most of the papers presented at the 1994 Nuclear Criticality Technology Safety Project (NCTSP) meeting, which was held May 10 and 11 at Williamsburg, Va. The meeting was broken up into seven sessions, which covered the following topics: (1) Validation and Application of Calculations; (2) Relevant Experiments for Criticality Safety; (3) Experimental Facilities and Capabilities; (4) Rad-Waste and Weapons Disassembly; (5) Criticality Safety Software and Development; (6) Criticality Safety Studies at Universities; and (7) Training. The minutes and list of participants of the Critical Experiment Needs Identification Workgroup meeting, which was held on May 9 at the same venue, has been included as an appendix. A second appendix contains the names and addresses of all NCTSP meeting participants. Separate abstracts have been indexed to the database for contributions to this proceedings

  15. Proceedings of the nuclear criticality technology safety project

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, R.G. [comp.

    1997-06-01

    This document contains summaries of the most of the papers presented at the 1994 Nuclear Criticality Technology Safety Project (NCTSP) meeting, which was held May 10 and 11 at Williamsburg, Va. The meeting was broken up into seven sessions, which covered the following topics: (1) Validation and Application of Calculations; (2) Relevant Experiments for Criticality Safety; (3) Experimental Facilities and Capabilities; (4) Rad-Waste and Weapons Disassembly; (5) Criticality Safety Software and Development; (6) Criticality Safety Studies at Universities; and (7) Training. The minutes and list of participants of the Critical Experiment Needs Identification Workgroup meeting, which was held on May 9 at the same venue, has been included as an appendix. A second appendix contains the names and addresses of all NCTSP meeting participants. Separate abstracts have been indexed to the database for contributions to this proceedings.

  16. A Vision of Quantitative Imaging Technology for Validation of Advanced Flight Technologies

    Science.gov (United States)

    Horvath, Thomas J.; Kerns, Robert V.; Jones, Kenneth M.; Grinstead, Jay H.; Schwartz, Richard J.; Gibson, David M.; Taylor, Jeff C.; Tack, Steve; Dantowitz, Ronald F.

    2011-01-01

    Flight-testing is traditionally an expensive but critical element in the development and ultimate validation and certification of technologies destined for future operational capabilities. Measurements obtained in relevant flight environments also provide unique opportunities to observe flow phenomenon that are often beyond the capabilities of ground testing facilities and computational tools to simulate or duplicate. However, the challenges of minimizing vehicle weight and internal complexity as well as instrumentation bandwidth limitations often restrict the ability to make high-density, in-situ measurements with discrete sensors. Remote imaging offers a potential opportunity to noninvasively obtain such flight data in a complementary fashion. The NASA Hypersonic Thermodynamic Infrared Measurements Project has demonstrated such a capability to obtain calibrated thermal imagery on a hypersonic vehicle in flight. Through the application of existing and accessible technologies, the acreage surface temperature of the Shuttle lower surface was measured during reentry. Future hypersonic cruise vehicles, launcher configurations and reentry vehicles will, however, challenge current remote imaging capability. As NASA embarks on the design and deployment of a new Space Launch System architecture for access beyond earth orbit (and the commercial sector focused on low earth orbit), an opportunity exists to implement an imagery system and its supporting infrastructure that provides sufficient flexibility to incorporate changing technology to address the future needs of the flight test community. A long term vision is offered that supports the application of advanced multi-waveband sensing technology to aid in the development of future aerospace systems and critical technologies to enable highly responsive vehicle operations across the aerospace continuum, spanning launch, reusable space access and global reach. Motivations for development of an Agency level imagery

  17. Propulsive Descent Technologies (PDT): Original Content Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Future missions to Mars require landed mass that exceeds the capability of current entry, descent, and landing technology.  New technology and techniques are...

  18. River Protection Project Technology and Innovation Roadmap.

    Energy Technology Data Exchange (ETDEWEB)

    Reid, D. S. [Hanford Site (HNF), Richland, WA (United States); Wooley, T. A. [Hanford Site (HNF), Richland, WA (United States); Kelly, S. E. [Hanford Site (HNF), Richland, WA (United States)

    2017-08-14

    The Technology and Innovation Roadmap is a planning tool for WRPS management, DOE ORP, DOE EM, and others to understand the risks and technology gaps associated with the RPP mission. The roadmap identifies and prioritizes technical areas that require technology solutions and underscores where timely and appropriate technology development can have the greatest impact to reduce those risks and uncertainties. The roadmap also serves as a tool for determining allocation of resources.

  19. Construction Project Performance Improvement through Radio Frequency Identification Technology Application on a Project Supply Chain

    Science.gov (United States)

    Wang, Heng

    2017-01-01

    Construction project productivity typically lags other industries and it has been the focus of numerous studies in order to improve the project performance. This research investigated the application of Radio Frequency Identification (RFID) technology on construction projects' supply chain and determined that RFID technology can improve the…

  20. Virtual reality for simulation of radiographic projections: validation of projection geometry.

    Science.gov (United States)

    Nilsson, T; Ahlqvist, J; Johansson, M; Isberg, A

    2004-01-01

    To develop a software for virtual reality (VR) simulation of X-ray images based on perspective projections through a patient model derived from data from a CT examination and to evaluate the accuracy in the projection geometry obtained by the software. A VR software was developed on a personal computer, with models of a patient, an X-ray machine and a detector. The model of the patient was derived from data from a CT examination of a dry skull. Simulated radiographic images of the patient model could be rendered as perspective projections based on the relative positions between the models. The projection geometry of the software was validated by developing an artificial CT data set containing high attenuation points as objects to be imaged. The accuracy in projection geometry was evaluated in a systematic way. The distances between two dots, representing the projected test points in the simulated radiographic images, were measured. They were compared with theoretical calculations of the corresponding distances using traditional mathematical tools. The difference between the simulated and calculated projected distances never exceeded 0.5 mm. The error in simulated projected distances was in most cases within 1%. No systematic errors were revealed. The software, developed for personal computers, can produce simulated X-ray images with high geometric accuracy based on perspective projections through a CT data set. The software can be used for simulation of radiographic examinations.

  1. Validating an infrared thermal switch as a novel access technology

    Directory of Open Access Journals (Sweden)

    Memarian Negar

    2010-08-01

    Full Text Available Abstract Background Recently, a novel single-switch access technology based on infrared thermography was proposed. The technology exploits the temperature differences between the inside and surrounding areas of the mouth as a switch trigger, thereby allowing voluntary switch activation upon mouth opening. However, for this technology to be clinically viable, it must be validated against a gold standard switch, such as a chin switch, that taps into the same voluntary motion. Methods In this study, we report an experiment designed to gauge the concurrent validity of the infrared thermal switch. Ten able-bodied adults participated in a series of 3 test sessions where they simultaneously used both an infrared thermal and conventional chin switch to perform multiple trials of a number identification task with visual, auditory and audiovisual stimuli. Participants also provided qualitative feedback about switch use. User performance with the two switches was quantified using an efficiency measure based on mutual information. Results User performance (p = 0.16 and response time (p = 0.25 with the infrared thermal switch were comparable to those of the gold standard. Users reported preference for the infrared thermal switch given its non-contact nature and robustness to changes in user posture. Conclusions Thermal infrared access technology appears to be a valid single switch alternative for individuals with disabilities who retain voluntary mouth opening and closing.

  2. Critical success factors in information technology projects

    Directory of Open Access Journals (Sweden)

    Ayesha

    2017-02-01

    Full Text Available The purpose of this study is to determine the critical success factors (CSF of IT projects in Pa-kistan. The identified factors cannot only be functional to exact type IT projects but also to all types of IT projects, their success directly affects the achievement of whole organization. The proposed study of this paper has determined 15 factors influencing the most on the success of IT projects through multiple regression analysis. The survey has disclosed that many CSFs were found related to IT projects but these 15 factors are also the backbone of IT projects. The re-search results obtained clearly indicated that the Leadership Qualities played a significant role in obtaining Top Management support in order to access to resources however, the Leadership Qualities did not play any role on the trained and capable Project Team Members. Besides, it is undoubtedly defined effective communication of the project was established to be influential on the conclusion and contributing factor towards the Success of IT projects in Pakistan. Top Man-agement Support as a whole was not found to play a key role in the IT Project Success.

  3. Demonstration projects for diffusion of clean technological innovation: a review

    NARCIS (Netherlands)

    Bossink, B.A.G.

    2014-01-01

    The demonstration project can be an effective organizational form to transform a clean technology prototype - for example, in the field of photovoltaics, carbon capture and storage, or wind power - into a marketable product. A question with regard to the clean technology demonstration project is how

  4. Evaluation of Representative Smart Grid Investment Project Technologies: Demand Response

    Energy Technology Data Exchange (ETDEWEB)

    Fuller, Jason C.; Prakash Kumar, Nirupama; Bonebrake, Christopher A.

    2012-02-14

    This document is one of a series of reports estimating the benefits of deploying technologies similar to those implemented on the Smart Grid Investment Grant (SGIG) projects. Four technical reports cover the various types of technologies deployed in the SGIG projects, distribution automation, demand response, energy storage, and renewables integration. A fifth report in the series examines the benefits of deploying these technologies on a national level. This technical report examines the impacts of a limited number of demand response technologies and implementations deployed in the SGIG projects.

  5. Cryogenic MEMS Technology for Sensing Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The development of cryogenic microwave components, such as focal plane polarization modulators, first requires an RF MEMS switching technology that operates...

  6. In-Space Propulsion (346620) Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Technologies include, but are not limited to, electric and advanced chemical propulsion, propellantless propulsion such as aerocapture and solar sails, sample return...

  7. Current Renewable Energy Technologies and Future Projections

    Energy Technology Data Exchange (ETDEWEB)

    Allison, Stephen W [ORNL; Lapsa, Melissa Voss [ORNL; Ward, Christina D [ORNL; Smith, Barton [ORNL; Grubb, Kimberly R [ORNL; Lee, Russell [ORNL

    2007-05-01

    The generally acknowledged sources of renewable energy are wind, geothermal, biomass, solar, hydropower, and hydrogen. Renewable energy technologies are crucial to the production and utilization of energy from these regenerative and virtually inexhaustible sources. Furthermore, renewable energy technologies provide benefits beyond the establishment of sustainable energy resources. For example, these technologies produce negligible amounts of greenhouse gases and other pollutants in providing energy, and they exploit domestically available energy sources, thereby reducing our dependence on both the importation of fossil fuels and the use of nuclear fuels. The market price of renewable energy technologies does not reflect the economic value of these added benefits.

  8. EU-project: SMILE. Synthesis of validation test numerical evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Dahl, A.; Moinereau, D. [Electricite de France, Moret-sur-Loing (France). R and D Div.; Kerkhf, K. [Materialpruefungsanstalt (MPA) Universitaet Stuttgart (Germany)

    2005-07-01

    The reactor pressure vessel (RPV) is an essential component liable to limit the lifetime duration of nuclear PWR power plants. The structural integrity assessment of RPV subjected to pressurised thermal shock (PTS) transients made at an European level does not take always into account the potential beneficial effect of the load history (warm pre-stress WPS). A three-year European Research and Development program (SMILE) started in January 2002 as part of the Fifth Framework Program of the European Atomic Energy Community (EURATOM) to evaluate this effect. The SMILE project aims to give sufficient elements to model and to validate the beneficial WPS effect in a RPV structural integrity assessment. Finally, this project aims to harmonize the different approaches to lay the basis for European codes and standards regarding the inclusion of the warm prestress (WPS) effect in the RPV assessments. Within the framework of this project, an important experimental work has been conducted including WPS type tests on CT specimens and also a PTS type transient experiment on a large cracked cylinder. The present paper describes shortly the PTS type experiment and presents the synthesis of the corresponding analyses based on engineering methods, finite element elastic and elastic-plastic computations, and local approach to fracture. The results are in good agreement with the experimental result. Significant margins are underlined, with an effective significant increase of the material resistance regarding the risk of brittle failure.

  9. EU-project: SMILE. Synthesis of validation test numerical evaluation

    International Nuclear Information System (INIS)

    Dahl, A.; Moinereau, D.

    2005-01-01

    The reactor pressure vessel (RPV) is an essential component liable to limit the lifetime duration of nuclear PWR power plants. The structural integrity assessment of RPV subjected to pressurised thermal shock (PTS) transients made at an European level does not take always into account the potential beneficial effect of the load history (warm pre-stress WPS). A three-year European Research and Development program (SMILE) started in January 2002 as part of the Fifth Framework Program of the European Atomic Energy Community (EURATOM) to evaluate this effect. The SMILE project aims to give sufficient elements to model and to validate the beneficial WPS effect in a RPV structural integrity assessment. Finally, this project aims to harmonize the different approaches to lay the basis for European codes and standards regarding the inclusion of the warm prestress (WPS) effect in the RPV assessments. Within the framework of this project, an important experimental work has been conducted including WPS type tests on CT specimens and also a PTS type transient experiment on a large cracked cylinder. The present paper describes shortly the PTS type experiment and presents the synthesis of the corresponding analyses based on engineering methods, finite element elastic and elastic-plastic computations, and local approach to fracture. The results are in good agreement with the experimental result. Significant margins are underlined, with an effective significant increase of the material resistance regarding the risk of brittle failure

  10. Assessing the Relationship between Ethical Project Management and Information Technology Project Success

    Science.gov (United States)

    Howell, Byron Winter

    2010-01-01

    The purpose of this quantitative study was to assess the relationship between ethical project management and information technology (IT) project success. The success of IT projects is important for organizational success, but the rate of IT projects is historically low, costing billions of dollars annually. Using four key ethical variables…

  11. The Columbia River Protection Supplemental Technologies Quality Assurance Project Plan

    International Nuclear Information System (INIS)

    Fix, Anne

    2007-01-01

    The U.S. Department of Energy (DOE) has conducted interim groundwater remedial activities on the Hanford Site since the mid-1990s for several groundwater contamination plumes. DOE established the Columbia River Protection Supplemental Technologies Project (Technologies Project) in 2006 to evaluate alternative treatment technologies. The objectives for the technology project are as follows: develop a 300 Area polyphosphate treatability test to immobilize uranium, design and test infiltration of a phosphate/apatite technology for Sr-90 at 100-N, perform carbon tetrachloride and chloroform attenuation parameter studies, perform vadose zone chromium characterization and geochemistry studies, perform in situ biostimulation of chromium studies for a reducing barrier at 100-D, and perform a treatability test for phytoremediation for Sr-90 at 100-N. This document provides the quality assurance guidelines that will be followed by the Technologies Project. This Quality Assurance Project Plan is based on the quality assurance requirements of DOE Order 414.1C, Quality Assurance, and 10 CFR 830, Subpart A--Quality Assurance Requirements as delineated in Pacific Northwest National Laboratory?s Standards-Based Management System. In addition, the technology project is subject to the Environmental Protection Agency (EPA) Requirements for Quality Assurance Project Plans (EPA/240/B-01/003, QA/R-5). The Hanford Analytical Services Quality Assurance Requirements Documents (HASQARD, DOE/RL-96-68) apply to portions of this project and to the subcontractors. HASQARD requirements are discussed within applicable sections of this plan.

  12. Project Management Plan for the INEL technology logic diagrams

    International Nuclear Information System (INIS)

    Rudin, M.J.

    1992-10-01

    This Project Management Plan (PjMP) describes the elements of project planning and control that apply to activities outlined in Technical Task Plan (TTP) ID-121117, ''Technology Logic Diagrams For The INEL.'' The work on this project will be conducted by personnel in EG ampersand G Idaho, Inc.'s Waste Technology Development Program. Technology logic diagrams represent a formal methodology to identify technology gaps or needs within Environmental Restoration/Waste Management Operations, which will focus on Office of Environmental Restoration and Waste Management (EM-50) research and development, demonstration, test, and evaluation efforts throughout the US Department of Energy complex. This PjMP describes the objectives, organization, roles and responsibilities, workscope and processes for implementing and managing the technology logic diagram for the Idaho National Engineering Laboratory project

  13. Braided Composite Technologies for Rotorcraft Structures Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Phase 2 effort will be used to advance the material and design technologies that were explored in the Phase 1 study of hybrid gears. In this hybrid approach, the...

  14. Advanced Manufacturing Technologies (AMT): Manufacturing Initiative Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA supports the Advanced Manufacturing National Program Office (AMNPO). Hosted by the National Institute of Standards and Technology (NIST) the AMNPO is...

  15. Large-scale decontamination and decommissioning technology demonstration project at a former uranium metal production facility

    International Nuclear Information System (INIS)

    Martineit, R.A.; Borgman, T.D.; Peters, M.S.; Stebbins, L.L.

    1997-01-01

    The Department of Energy's (DOE) Office of Science and Technology Decontamination and Decommissioning (D ampersand D) Focus Area, led by the Federal Energy Technology Center, has been charged with improving upon baseline D ampersand D technologies with the goal of demonstrating and validating more cost-effective and safer technologies to characterize, deactivate, survey, decontaminate, dismantle, and dispose of surplus structures, buildings, and their contents at DOE sites. The D ampersand D Focus Area's approach to verifying the benefits of the improved D ampersand D technologies is to use them in large-scale technology demonstration (LSTD) projects at several DOE sites. The Fernald Environmental Management Project (FEMP) was selected to host one of the first three LSTD's awarded by the D ampersand D Focus Area. The FEMP is a DOE facility near Cincinnati, Ohio, that was formerly engaged in the production of high quality uranium metal. The FEMP is a Superfund site which has completed its RUFS process and is currently undergoing environmental restoration. With the FEMP's selection to host an LSTD, the FEMP was immediately faced with some challenges. The primary challenge was that this LSTD was to be integrated into the FEMP's Plant 1 D ampersand D Project which was an ongoing D ampersand D Project for which a firm fixed price contract had been issued to the D ampersand D Contractor. Thus, interferences with the baseline D ampersand D project could have significant financial implications. Other challenges include defining and selecting meaningful technology demonstrations, finding/selecting technology providers, and integrating the technology into the baseline D ampersand D project. To date, twelve technologies have been selected, and six have been demonstrated. The technology demonstrations have yielded a high proportion of open-quotes winners.close quotes All demonstrated, technologies will be evaluated for incorporation into the FEMP's baseline D ampersand D

  16. Large-scale decontamination and decommissioning technology demonstration project at a former uranium metal production facility

    Energy Technology Data Exchange (ETDEWEB)

    Martineit, R.A.; Borgman, T.D.; Peters, M.S.; Stebbins, L.L. [and others

    1997-03-05

    The Department of Energy`s (DOE) Office of Science and Technology Decontamination and Decommissioning (D&D) Focus Area, led by the Federal Energy Technology Center, has been charged with improving upon baseline D&D technologies with the goal of demonstrating and validating more cost-effective and safer technologies to characterize, deactivate, survey, decontaminate, dismantle, and dispose of surplus structures, buildings, and their contents at DOE sites. The D&D Focus Area`s approach to verifying the benefits of the improved D&D technologies is to use them in large-scale technology demonstration (LSTD) projects at several DOE sites. The Fernald Environmental Management Project (FEMP) was selected to host one of the first three LSTD`s awarded by the D&D Focus Area. The FEMP is a DOE facility near Cincinnati, Ohio, that was formerly engaged in the production of high quality uranium metal. The FEMP is a Superfund site which has completed its RUFS process and is currently undergoing environmental restoration. With the FEMP`s selection to host an LSTD, the FEMP was immediately faced with some challenges. The primary challenge was that this LSTD was to be integrated into the FEMP`s Plant 1 D&D Project which was an ongoing D&D Project for which a firm fixed price contract had been issued to the D&D Contractor. Thus, interferences with the baseline D&D project could have significant financial implications. Other challenges include defining and selecting meaningful technology demonstrations, finding/selecting technology providers, and integrating the technology into the baseline D&D project. To date, twelve technologies have been selected, and six have been demonstrated. The technology demonstrations have yielded a high proportion of {open_quotes}winners.{close_quotes} All demonstrated, technologies will be evaluated for incorporation into the FEMP`s baseline D&D strategy.

  17. Advanced Manufacturing Technologies (AMT): Advanced Near Net Shape Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop and mature manufacturing technology to enable fabrication of single-piece integrally-stiffened launch vehicle structures to replace expensive, heavy, and...

  18. Ford Plug-In Project: Bringing PHEVs to Market Demonstration and Validation Project

    Energy Technology Data Exchange (ETDEWEB)

    D' Annunzio, Julie [Ford Motor Company, Dearborn, MI (United States); Slezak, Lee [U.S. DOE Office of Energy Efficiency & Renewable Energy, Washington, DC (United States); Conley, John Jason [National Energy Technology Lab. (NETL), Albany, OR (United States)

    2014-03-26

    This project is in support of our national goal to reduce our dependence on fossil fuels. By supporting efforts that contribute toward the successful mass production of plug-in hybrid electric vehicles, our nation’s transportation-related fuel consumption can be offset with energy from the grid. Over four and a half years ago, when this project was originally initiated, plug-in electric vehicles were not readily available in the mass marketplace. Through the creation of a 21 unit plug-in hybrid vehicle fleet, this program was designed to demonstrate the feasibility of the technology and to help build cross-industry familiarity with the technology and interface of this technology with the grid. Ford Escape PHEV Demonstration Fleet 3 March 26, 2014 Since then, however, plug-in vehicles have become increasingly more commonplace in the market. Ford, itself, now offers an all-electric vehicle and two plug-in hybrid vehicles in North America and has announced a third plug-in vehicle offering for Europe. Lessons learned from this project have helped in these production vehicle launches and are mentioned throughout this report. While the technology of plugging in a vehicle to charge a high voltage battery with energy from the grid is now in production, the ability for vehicle-to-grid or bi-directional energy flow was farther away than originally expected. Several technical, regulatory and potential safety issues prevented progressing the vehicle-to-grid energy flow (V2G) demonstration and, after a review with the DOE, V2G was removed from this demonstration project. Also proving challenging were communications between a plug-in vehicle and the grid or smart meter. While this project successfully demonstrated the vehicle to smart meter interface, cross-industry and regulatory work is still needed to define the vehicle-to-grid communication interface.

  19. Development and validation of educational technology for venous ulcer care.

    Science.gov (United States)

    Benevides, Jéssica Lima; Coutinho, Janaina Fonseca Victor; Pascoal, Liliane Chagas; Joventino, Emanuella Silva; Martins, Mariana Cavalcante; Gubert, Fabiane do Amaral; Alves, Allana Mirella

    2016-04-01

    To develop and validate an educational technology venous ulcers care. Methodological study conducted in five steps: Situational diagnosis; literature review; development of texts, illustrations and layout; apparent and content validity by the Content Validity Index, assessment of Flesch Readability Index; and pilot testing. The developed technology was a type of booklet entitled Booklet for Venous Ulcers Care, consisting of seven topics: Diet and food intake, walking and light exercise, resting with elevated leg, bandage care, compression therapy, family support, and keeping healthy habits. The apparent validity revealed minimal agreement of 85.7% in the clarity and comprehensibility. The total content validity index was 0.97, the Flesch Readability Index was 75%, corresponding to the reading "fairly easy". The pilot test showed that 100% of people with venous ulcers evaluated the text and the illustrations as understandable, as appropriate. The educational technology proved to be valid for the appearance and content with potential for use in clinical practice. Construir e validar uma tecnologia educativa para cuidados com úlcera venosa. Estudo metodológico realizado em cinco fases: diagnóstico situacional; revisão da literatura; desenvolvimento de textos, ilustrações e diagramação; validade de aparência e de conteúdo pelo Índice de Validade de Conteúdo, avaliação do Índice de Legibilidade de Flesch; e teste piloto. A tecnologia desenvolvida foi do tipo cartilha intitulada Cartilha para cuidados com úlcera venosa, constituída de sete tópicos: Alimentação, Caminhadas e exercícios leves, Repouso com a perna elevada, Cuidados com o curativo, Terapia compressiva, Apoio familiar, e manter hábitos saudáveis. A validade aparente revelou concordância mínima de 85,7% na clareza e compreensibilidade. O Índice de Validade de Conteúdo total foi de 0,97, o Índice de legibilidade de Flesch foi de 75%, o que correspondeu à leitura "razoavelmente f

  20. A Survey of Technologies Supporting Virtual Project Based Learning

    DEFF Research Database (Denmark)

    Dirckinck-Holmfeld, Lone

    2002-01-01

    This paper describes a survey of technologies and to what extent they support virtual project based learning. The paper argues that a survey of learning technologies should be related to concrete learning tasks and processes. Problem oriented project pedagogy (POPP) is discussed, and a framework...... for evaluation is proposed where negotiation of meaning, coordination and resource management are identified as the key concepts in virtual project based learning. Three e-learning systems are selected for the survey, Virtual-U, Lotus Learningspace and Lotus Quickplace, as each system offers different strategies...... for e-learning. The paper concludes that virtual project based learning may benefit from facilities of all these systems....

  1. Photovoltaic technologies and the genesis project

    International Nuclear Information System (INIS)

    Kuwano, Y.

    1994-01-01

    In this paper, the author first presents briefly global environmental problems and energy problems, as well as recent trends in representative types of solar cell. Next, he gives examples of applications for these solar cells, and finally discusses future prospects for solar cells in the form of the GENESIS project. (TEC). 12 figs., 4 refs

  2. SmartPark Technology Demonstration Project

    Science.gov (United States)

    2013-11-01

    The purpose of FMCSAs SmartPark initiative is to determine the feasibility of a technology for providing truck parking space availability in real time to truckers on the road. SmartPark consists of two phases. Phase I was a field operational test ...

  3. Fabrication Technology for X-Ray Optics and Mandrels Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA has a cross-project need for large format aspheric x-ray optics, which, demonstrate exceptionally low periodic surface errors. Available technologies to both...

  4. Picosats for Autonomous Rendezvous and Docking Technology Demonstration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Over the next decade, a host of new technologies and capabilities will be needed by NASA to support Project Constellation. For risk reduction considerations, it is...

  5. Success in large high-technology projects: What really works?

    Science.gov (United States)

    Crosby, P.

    2014-08-01

    Despite a plethora of tools, technologies and management systems, successful execution of big science and engineering projects remains problematic. The sheer scale of globally funded projects such as the Large Hadron Collider and the Square Kilometre Array telescope means that lack of project success can impact both on national budgets, and collaborative reputations. In this paper, I explore data from contemporary literature alongside field research from several current high-technology projects in Europe and Australia, and reveal common `pressure points' that are shown to be key influencers of project control and success. I discuss the how mega-science projects sit between being merely complicated, and chaotic, and explain the importance of understanding multiple dimensions of project complexity. Project manager/leader traits are briefly discussed, including capability to govern and control such enterprises. Project structures are examined, including the challenge of collaborations. I show that early attention to building project resilience, curbing optimism, and risk alertness can help prepare large high-tech projects against threats, and why project managers need to understand aspects of `the silent power of time'. Mission assurance is advanced as a critical success function, alongside the deployment of task forces and new combinations of contingency plans. I argue for increased project control through industrial-style project reviews, and show how post-project reviews are an under-used, yet invaluable avenue of personal and organisational improvement. Lastly, I discuss the avoidance of project amnesia through effective capture of project knowledge, and transfer of lessons-learned to subsequent programs and projects.

  6. Technology transfer - LSA project to industry

    Science.gov (United States)

    Gallagher, B. D.

    1981-01-01

    Program goals, procedural steps, and examples of different situations encountered in the Low-cost Solar Array (LSA) project managed at the Jet Propulsion Laboratory in conjunction with industrial contractors are outlined. The project is intended to result in the production-ready status of photovoltaic panels which produce power at $.70/peak W by 1986. The first phase of the program identified materials and processes which were promising for further development. Phase II served to correct steps and materials which did not work and were important to the array processing. The third phase will bring the processes to technical readiness by demonstration of successful fabrication of modules at a scale which can be increased to commercial production. An information exchange is ongoing between manufacturers and the JPL to alter specific steps which yield results which vary from those found in the laboratory when transferred to the factory.

  7. Manufacturing Methods & Technology (MMT) Project Execution Report

    Science.gov (United States)

    1982-10-01

    CY82 19 PROJECTS ADDED IN IST HALF, CY82 DARCOM 0 82 5052 ARMY ENGINEERING UESIGN HANidBOCKS TEChNICAL SLILNTIFIL ANu ENGINEERING DATA IS CONTINALLY...FROM SUPER- ALLOY POWDER THE NEED TO IMPRCVE PObDER CLEANLINESS HAS BEEN RECOGNIZED. 1 82 7298 HIGH TEMPERATURE VACUUM CARBURIZING GEAR CARBURIZING IS...THE PRODUCTION ENVIRONMENT. 1 82 7389 PRODUCTION OF ALUMINUM ALiFRAME COMPONENTS CURRENT METHODS OF MACHINING ALUMINIUM FORGINGS ARE EXPENSIVE AND

  8. Numerical modeling in photonic crystals integrated technology: the COPERNICUS Project

    DEFF Research Database (Denmark)

    Malaguti, Stefania; Armaroli, Andrea; Bellanca, Gaetano

    2011-01-01

    Photonic crystals will play a fundamental role in the future of optical communications. The relevance of the numerical modeling for the success of this technology is assessed by using some examples concerning the experience of the COPERNICUS Project.......Photonic crystals will play a fundamental role in the future of optical communications. The relevance of the numerical modeling for the success of this technology is assessed by using some examples concerning the experience of the COPERNICUS Project....

  9. Correlational Study of Project Managers' Competence Experience, Education, and Technology Experience on Project

    Science.gov (United States)

    Hosford, Bryan

    2017-01-01

    Organizations continue to rely on information technology (IT) as a foundational element, yet poor IT project success continues to impact growth and innovation. Research into IT project success is widespread yet has focused on high-level project management attributes, not specific IT solutions. A review of the research literature revealed that the…

  10. The Interactions among Information Technology Organizational Learning, Project Learning, and Project Success

    Science.gov (United States)

    McKay, Donald S., II

    2012-01-01

    Knowledge gained from completed information technology (IT) projects was not often shared with emerging project teams. Learning lessons from other project teams was not pursued because people lack time, do not see value in learning, fear a potentially painful process, and had concerns that sharing knowledge will hurt their career. Leaders could…

  11. The Role of the Project Management Office on Information Technology Project Success

    Science.gov (United States)

    Stewart, Jacob S.

    2010-01-01

    The rate of failed and challenged Information Technology (IT) projects is too high according to the CHAOS Studies by the Standish Group and the literature on project management (Standish Group, 2008). The CHAOS Studies define project success as meeting the triple constraints of scope, time, and cost. Assessing critical success factors is another…

  12. Minimal Technologies Application Project: Planning and installation

    Energy Technology Data Exchange (ETDEWEB)

    Zellmer, S.D.; Hinchman, R.R.; Severinghaus, W.D.; Johnson, D.O.; Brent, J.J.

    1989-03-01

    Intensive and continuous tactical training during the last 35 years at the Hohenfels Training Area in West Germany has caused the loss of vegetative ground cover and has accelerated soil erosion rates, resulting in extensive environmental damage, safety hazards, and unrealistic training habitats. The objectives of this project are to develop and evaluate revegetation procedures for establishing adequate vegetative cover to control erosion at minimal costs and disruption to training activities. This project involved the development and installation of 12 revegetation procedures that combined four seedbed preparation methods and seeding options with three site-closure periods. In March 1987, the four seedbed preparation/seeding options and closure periods were selected, a study site design and location chosen, and specifications for the revegetation procedures developed. A German rehabilitation contractor attempted the specified seedbed preparation and seeding on the 13.5-ha site in June, but abnormally high rainfall, usually wet site conditions, and lack of adequate equipment prevented the contractor from completing six of the 12 planned procedures. Planning and execution of the project has nonetheless provided valuable information on the importance and use of soil analytical results, seed availability and cost data, contractor equipment requirements, and time required for planning future revegetation efforts. Continued monitoring of vegetative ground cover at the site for the next two years, combined with cost information, will provide necessary data to determine which of the six revegetation procedures is the most effective. These data will be used in planning future rehabilitation efforts on tactical training areas.

  13. MNOS BORAM Manufacturing Methods and Technology Project.

    Science.gov (United States)

    1981-08-01

    Technology Redondo Beach, CA 90278 and Devices Laboratory (ERADCOM) ATTN: DELET-BS Dr. Paul E. Greene 1 Mr. George W. Taylor Hewlett-Packard company Fort...Officer Dr, Harvey Nathanson 1 US Army Research Office Westinghouse Research and ATTN: Dr. Horst Wittmann Development Center P. 0. Box 12211 1310 Beulah...13441 ATTN: Mr. Paul Losleben, R15 9800 Savage Road Commander, RADC I Fort George G. Meade, MD 20755 ATTN: Mr. Joesph B. Brauer, RBRM Griffiss AFB, NY

  14. Airlie House Pollution Prevention Technology Transfer pilot projects

    Energy Technology Data Exchange (ETDEWEB)

    Thuot, J.R.; Myron, H.; Gatrone, R.; McHenry, J.

    1996-08-01

    The projects were a series of pilot projects developed for DOE with the intention of transferring pollution prevention technology to private industry. The concept was to develop small technology transfer initiatives in partnership with the private sector. Argonne National Laboratory developed three projects: the microscale chemistry in education program, the microscale cost benefit study, and the Bethel New Life recycling trainee program. The two microscale chemistry projects focused on introducing microscale chemistry technologies to secondary and college education. These programs were inexpensive to develop and received excellent evaluations from participants and regulators. The recycle trainee project provided training for two participants and identified recycling and source reduction opportunities in Argonne`s solid waste stream. The pilot projects demonstrated that technology transfer initiatives can be developed and implemented with a small budget and within a short period of time. The essential components of the pilot projects were identification of target technologies that were already available, identification of target audiences, and a focus of effort to achieve a limited but defined objective.

  15. Incorporating the Technology Roadmap Uncertainties into the Project Risk Assessment

    International Nuclear Information System (INIS)

    Bonnema, B.E.

    2002-01-01

    This paper describes two methods, Technology Roadmapping and Project Risk Assessment, which were used to identify and manage the technical risks relating to the treatment of sodium bearing waste at the Idaho National Engineering and Environmental Laboratory. The waste treatment technology under consideration was Direct Vitrification. The primary objective of the Technology Roadmap is to identify technical data uncertainties for the technologies involved and to prioritize the testing or development studies to fill the data gaps. Similarly, project management's objective for a multi-million dollar construction project includes managing all the key risks in accordance to DOE O 413.3 - ''Program and Project Management for the Acquisition of Capital Assets.'' In the early stages, the Project Risk Assessment is based upon a qualitative analysis for each risk's probability and consequence. In order to clearly prioritize the work to resolve the technical issues identified in the Technology Roadmap, the issues must be cross- referenced to the project's Risk Assessment. This will enable the project to get the best value for the cost to mitigate the risks

  16. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  17. Leadership Styles: Perceptions in Information Technology Project Teams

    Science.gov (United States)

    Fune, Roy P.

    2013-01-01

    The purpose of this study was to uncover Information Technology (IT) Project Managers' and IT Professionals' perceptions of effective leadership styles as they apply to project success. There have been prior studies dealing with the differences in perceptions between IT Functional Manager's leadership self-perception versus staff perceptions of…

  18. Maturity and Performance in Information Technology Project Management

    Directory of Open Access Journals (Sweden)

    Renato de Oliveira Moraes

    2013-04-01

    Full Text Available This study concerns the relationship between the information technology (IT project performance and the project management maturity of an organization. The research was developed from a survey of 185 respondents during 2010. Project performance was evaluated using the two first dimensions proposed by Shenhar et al (2001 – project efficiency and impact on the customer. Project management maturity was evaluated using the formalization level of project management processes described in PMBoK. Data were analyzed by statistical methods (factorial analysis, Cronbach´s alpha, cluster analysis and bivariate analysis and showed that (i organizations with superior maturity present superior performance in their projects and (ii different maturity dimensions have distinct impacts on IT projects performance.

  19. Manufacturing Methods and Technology Project Execution Report.

    Science.gov (United States)

    1984-10-01

    CY84 A,4t TA C 8’. 5052 ARMY ENGINEERING DESIGN H&NUBOIUKS TkCHNICAL SLIENTIFIC AND ENGINEERING OATA IS CONTINALLY BEING GENERk ED WITHIN THt ARMY A:A0...PRODUCTION OF ALUMINUM AIRFRAME COMPONENTS LURRENT METHODS OF MACHINING ALUMINIUM FORGINGS ARE EXPENSIVE AND REQUIRE AN EXCESSIVE NUMBER OF PARTS. 1 84...PRODUCING WEAPON COMPONENTS IS MAINLY BY MACHINING FROM WROUGHT STUCK. IHIS IS A HIGH COST METHOD WHICH PRODUCES MUCH ALLOY STEEL SCRAP. 29 0..I PROJECTS

  20. Fuel Cell Technology Status Analysis Project: Partnership Opportunities

    Energy Technology Data Exchange (ETDEWEB)

    2017-03-13

    Fact sheet describing the National Renewable Energy Laboratory's (NREL's) Fuel Cell Technology Status Analysis Project. NREL is seeking fuel cell industry partners from the United States and abroad to participate in an objective and credible analysis of commercially available fuel cell products to benchmark the current state of the technology and support industry growth.

  1. The Earthquake‐Source Inversion Validation (SIV) Project

    KAUST Repository

    Mai, Paul Martin

    2016-04-27

    Finite-fault earthquake source inversions infer the (time-dependent) displacement on the rupture surface from geophysical data. The resulting earthquake source models document the complexity of the rupture process. However, multiple source models for the same earthquake, obtained by different research teams, often exhibit remarkable dissimilarities. To address the uncertainties in earthquake-source inversion methods and to understand strengths and weaknesses of the various approaches used, the Source Inversion Validation (SIV) project conducts a set of forward-modeling exercises and inversion benchmarks. In this article, we describe the SIV strategy, the initial benchmarks, and current SIV results. Furthermore, we apply statistical tools for quantitative waveform comparison and for investigating source-model (dis)similarities that enable us to rank the solutions, and to identify particularly promising source inversion approaches. All SIV exercises (with related data and descriptions) and statistical comparison tools are available via an online collaboration platform, and we encourage source modelers to use the SIV benchmarks for developing and testing new methods. We envision that the SIV efforts will lead to new developments for tackling the earthquake-source imaging problem.

  2. Treatment Facility F: Accelerated Removal and Validation Project

    Energy Technology Data Exchange (ETDEWEB)

    Sweeney, J.J.; Buettner, M.H.; Carrigan, C.R. [and others

    1994-04-01

    The Accelerated Removal and Validation (ARV) phase of remediation at the Treatment Facility F (TFF) site at Lawrence Livermore National Laboratory (LLNL) was designed to accelerate removal of gasoline from the site when compared to normal, single shift, pump-and-treat operations. The intent was to take advantage of the in-place infrastructure plus the increased underground temperatures resulting from the Dynamic Underground Stripping Demonstration Project (DUSDP). Operations continued 24-hours (h) per day between October 4 and December 12, 1993. Three contaminant removal rate enhancement approaches were explored during the period of continuous operation. First, we tried several configurations of the vapor pumping system to maximize the contaminant removal rate. Second, we conducted two brief trials of air injection into the lower steam zone. Results were compared with computer models, and the process was assessed for contaminant removal rate enhancement. Third, we installed equipment to provide additional electrical heating of contaminated low-permeability soil. Four new electrodes were connected into the power system. Diagnostic capabilities at the TFF site were upgraded so that we could safely monitor electrical currents, soil temperatures, and water treatment system processes while approximately 300 kW of electrical energy was being applied to the subsurface.

  3. Didactics, Technology, and Organisation of Project Based Distance Education

    DEFF Research Database (Denmark)

    Knudsen, Morten Haack; Borch, Ole M.; Helbo, Jan

    2005-01-01

    The didactics, technology, and organization of an ICT supported distance engineering Master education are described. A systematic monitoring and evaluation of the basis year has given useful experience, subsequently used for adjustments and improvements. A successful on-campus project organized...... as asynchronous, which is possible with extensive utilization of new information and communication technology. Virtual meetings are conducted with text, sound and video based communication. Also the organization requires technology. A new learning management system, specifically designed to the didactic form...

  4. Technology Performance Report: Duke Energy Notrees Wind Storage Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Wehner, Jeff [Duke Energy Renewables, Charlotte, NC (United States); Mohler, David [Duke Energy Renewables, Charlotte, NC (United States); Gibson, Stuart [Duke Energy Renewables, Charlotte, NC (United States); Clanin, Jason [Duke Energy Renewables, Charlotte, NC (United States); Faris, Don [Duke Energy Renewables, Charlotte, NC (United States); Hooker, Kevin [Duke Energy Renewables, Charlotte, NC (United States); Rowand, Michael [Duke Energy Renewables, Charlotte, NC (United States)

    2015-11-01

    Duke Energy Renewables owns and operates the Notrees Wind Farm in west Texas’s Ector and Winkler counties. The wind farm, which was commissioned in April 2009, has a total capacity of 152.6 MW generated by 55 Vestas V82 turbines, one Vestas 1-V90 experimental turbine, and 40 GE 1.5-MW turbines. The Vestas V82 turbines have a generating capacity of 1.65 MW each, the Vestas V90 turbine has a generating capacity of 1.86 MW, and the GE turbines have a generating capacity of 1.5 MW each. The objective of the Notrees Wind Storage Demonstration Project is to validate that energy storage increases the value and practical application of intermittent wind generation and is commercially viable at utility scale. The project incorporates both new and existing technologies and techniques to evaluate the performance and potential of wind energy storage. In addition, it could serve as a model for others to adopt and replicate. Wind power resources are expected to play a significant part in reducing greenhouse gas emissions from electric power generation by 2030. However, the large variability and intermittent nature of wind presents a barrier to integrating it within electric markets, particularly when competing against conventional generation that is more reliable. In addition, wind power production often peaks at night or other times when demand and electricity prices are lowest. Energy storage systems can overcome those barriers and enable wind to become a valuable asset and equal competitor to conventional fossil fuel generation.

  5. Technology Transfer and Outreach for SNL/Rochester ALPHA Project.

    Energy Technology Data Exchange (ETDEWEB)

    Sinars, Daniel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-01-01

    This report describes the next stage goals and resource needs for the joint Sandia and University of Rochester ARPA-E project. A key portion of this project is Technology Transfer and Outreach, with the goal being to help ensure that this project develops a credible method or tool that the magneto-inertial fusion (MIF) research community can use to broaden the advocacy base, to pursue a viable path to commercial fusion energy, and to develop other commercial opportunities for the associated technology. This report describes an analysis of next stage goals and resource needs as requested by Milestone 5.1.1.

  6. Ceramic Technology Project semiannual progress report, October 1992--March 1993

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1993-09-01

    This project was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. Although progress has been made in developing reliable structural ceramics, further work is needed to reduce cost. The work described in this report is organized according to the following work breakdown structure project elements: Materials and processing (monolithics [Si nitride, carbide], ceramic composites, thermal and wear coatings, joining, cost effective ceramic machining), materials design methodology (contact interfaces, new concepts), data base and life prediction (structural qualification, time-dependent behavior, environmental effects, fracture mechanics, nondestructive evaluation development), and technology transfer.

  7. Korea-China Optical Technology Research Centre Project

    International Nuclear Information System (INIS)

    Kim, Cheol Jung; Rhee, Y. J.; Jung, D. Y. and others

    2004-06-01

    The main objectives of this project are to establish the international collaboration basis of optical technologies between Korea and China. The combination of the Chinese advanced fundamental technologies with the Korean industrialization and commercialization infrastructures is realized, by ways of exchanging scientists and informations, holding joint seminars, cooperative utilization of research resources. On the ground of this establishment, the optical technologies of Korea are supposed to be leveled up to those of the world-most advanced. At the same time, for the improvement of mutual benefit and financial profit of both countries, providing technical advice and suggestions to the optical industries in the two countries is an another goal of this project. The state-of-the-arts of the Chinese technologies such as aerospace engineering, military defence technology, medical technology, laser fusion research, and so on, are known to be far above those of Korean and up to one of the most advanced in the world. Thus it is thought to be necessary that the acquisition of these technologies, implementation of joint research projects for technology development as well as the balanced opportunities for commercial product/sales and cooperation should be actively pursued in order to enhance the levels of Korean technologies in these fields

  8. Korea-China Optical Technology Research Centre Project

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Cheol Jung; Rhee, Y. J.; Jung, D. Y. and others

    2004-06-15

    The main objectives of this project are to establish the international collaboration basis of optical technologies between Korea and China. The combination of the Chinese advanced fundamental technologies with the Korean industrialization and commercialization infrastructures is realized, by ways of exchanging scientists and informations, holding joint seminars, cooperative utilization of research resources. On the ground of this establishment, the optical technologies of Korea are supposed to be leveled up to those of the world-most advanced. At the same time, for the improvement of mutual benefit and financial profit of both countries, providing technical advice and suggestions to the optical industries in the two countries is an another goal of this project. The state-of-the-arts of the Chinese technologies such as aerospace engineering, military defence technology, medical technology, laser fusion research, and so on, are known to be far above those of Korean and up to one of the most advanced in the world. Thus it is thought to be necessary that the acquisition of these technologies, implementation of joint research projects for technology development as well as the balanced opportunities for commercial product/sales and cooperation should be actively pursued in order to enhance the levels of Korean technologies in these fields.

  9. Remote sensing validation through SOOP technology: implementation of Spectra system

    Science.gov (United States)

    Piermattei, Viviana; Madonia, Alice; Bonamano, Simone; Consalvi, Natalizia; Caligiore, Aurelio; Falcone, Daniela; Puri, Pio; Sarti, Fabio; Spaccavento, Giovanni; Lucarini, Diego; Pacci, Giacomo; Amitrano, Luigi; Iacullo, Salvatore; D'Andrea, Salvatore; Marcelli, Marco

    2017-04-01

    The development of low-cost instrumentation plays a key role in marine environmental studies and represents one of the most innovative aspects of marine research. The availability of low-cost technologies allows the realization of extended observatory networks for the study of marine phenomena through an integrated approach merging observations, remote sensing and operational oceanography. Marine services and practical applications critically depends on the availability of large amount of data collected with sufficiently dense spatial and temporal sampling. This issue directly influences the robustness both of ocean forecasting models and remote sensing observations through data assimilation and validation processes, particularly in the biological domain. For this reason it is necessary the development of cheap, small and integrated smart sensors, which could be functional both for satellite data validation and forecasting models data assimilation as well as to support early warning systems for environmental pollution control and prevention. This is particularly true in coastal areas, which are subjected to multiple anthropic pressures. Moreover, coastal waters can be classified like case 2 waters, where the optical properties of inorganic suspended matter and chromophoric dissolved organic matter must be considered and separated by the chlorophyll a contribution. Due to the high costs of mooring systems, research vessels, measure platforms and instrumentation a big effort was dedicated to the design, development and realization of a new low cost mini-FerryBox system: Spectra. Thanks to the modularity and user-friendly employment of the system, Spectra allows to acquire continuous in situ measures of temperature, conductivity, turbidity, chlorophyll a and chromophoric dissolved organic matter (CDOM) fluorescences from voluntary vessels, even by non specialized operators (Marcelli et al., 2014; 2016). This work shows the preliminary application of this technology to

  10. SUCCESS CONCEPT ANALYSIS APPLIED TO THE INFORMATION TECHNOLOGY PROJECT MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Cassio C. Montenegro Duarte

    2012-05-01

    Full Text Available This study evaluates the concept of success in project management that is applicable to the IT universe, from the classical theory associated with the techniques of project management. Therefore, it applies the theoretical analysis associated to the context of information technology in enterprises as well as the classic literature of traditional project management, focusing on its application in business information technology. From the literature developed in the first part of the study, four propositions were prepared for study which formed the basis for the development of the field research with three large companies that develop projects of Information Technology. The methodology used in the study predicted the development of the multiple case study. Empirical evidence suggests that the concept of success found in the classical literature in project management adjusts to the environment management of IT projects. Showed that it is possible to create the model of standard IT projects in order to replicate it in future derivatives projects, which depends on the learning acquired at the end of a long and continuous process and sponsorship of senior management, which ultimately results in its merger into the company culture.

  11. State financed PV technology projects in Nigeria

    Energy Technology Data Exchange (ETDEWEB)

    Gyoh, L.; Gyoh, S. [Iceberg PVPS Consultants, Sheffield (United Kingdom)

    2004-07-01

    Despite the progress made by the democratic government of Nigeria to eradicate poverty, there are still millions of people without access to electricity. It would not be financially viable to extend the national electricity grid to each electoral ward, in remote locations in the country. The use of photovoltaic technology now brings electricity to many rural areas as part of the provision of basic needs by the Nigerian authorities. The Nasarawa State Government has embarked on the provision of all it electoral wards with solar powered water supply systems to carter for a mostly rural population of 3.4 million people. The Benue, Taraba, Bauchi and Jigawa State governments have embarked on similar schemes in Rural Water Supply, Health and the Educational sectors of the economy. Ambitious PV programmes, of this nature, inevitably face challenges in developing countries. The preliminary recommendations, of this ongoing study, have been made to address some of the potential challenges in some of the key areas. This paper reviews the implementation progress and suggests some of the lessons that might be learnt. (authors)

  12. State financed PV technology projects in Nigeria

    International Nuclear Information System (INIS)

    Gyoh, L.; Gyoh, S.

    2004-01-01

    Despite the progress made by the democratic government of Nigeria to eradicate poverty, there are still millions of people without access to electricity. It would not be financially viable to extend the national electricity grid to each electoral ward, in remote locations in the country. The use of photovoltaic technology now brings electricity to many rural areas as part of the provision of basic needs by the Nigerian authorities. The Nasarawa State Government has embarked on the provision of all it electoral wards with solar powered water supply systems to carter for a mostly rural population of 3.4 million people. The Benue, Taraba, Bauchi and Jigawa State governments have embarked on similar schemes in Rural Water Supply, Health and the Educational sectors of the economy. Ambitious PV programmes, of this nature, inevitably face challenges in developing countries. The preliminary recommendations, of this ongoing study, have been made to address some of the potential challenges in some of the key areas. This paper reviews the implementation progress and suggests some of the lessons that might be learnt. (authors)

  13. Technology assessment Jordan Nuclear Power Plant Project

    International Nuclear Information System (INIS)

    2010-01-01

    Preliminary regional analysis was carried out for identification of potential sites for NPP, followed by screening of these sites and selecting candidate sites. Aqaba sites are proposed, where it can use the sea water for cooling: i.Site 1; at the sea where it can use the sea water for direct cooling. ii.Site 2; 10 km to the east of Gulf of Aqaba shoreline at the Saudi Arabia borders. iii.Site 3, 4 km to the east of Gulf of Aqaba shoreline. Only the granitic basement in the east of the 6 km²site should be considered as a potential site for a NPP. Preliminary probabilistic seismic hazard assessment gives: Operating-Basis Earthquake-OBE (475 years return period) found to be in the range of 0.163-0.182 g; Safe Shutdown Earthquake-SSE (10,000 years return period) found to be in the range of 0.333-0.502g. The process include also setting up of nuclear company and other organizational matters. Regulations in development are: Site approval; Construction permitting; Overall licensing; Safety (design, construction, training, operations, QA); Emergency planning; Decommissioning; Spent fuel and RW management. JAEC's technology assessment strategy and evaluation methodology are presented

  14. Human genome project: revolutionizing biology through leveraging technology

    Science.gov (United States)

    Dahl, Carol A.; Strausberg, Robert L.

    1996-04-01

    The Human Genome Project (HGP) is an international project to develop genetic, physical, and sequence-based maps of the human genome. Since the inception of the HGP it has been clear that substantially improved technology would be required to meet the scientific goals, particularly in order to acquire the complete sequence of the human genome, and that these technologies coupled with the information forthcoming from the project would have a dramatic effect on the way biomedical research is performed in the future. In this paper, we discuss the state-of-the-art for genomic DNA sequencing, technological challenges that remain, and the potential technological paths that could yield substantially improved genomic sequencing technology. The impact of the technology developed from the HGP is broad-reaching and a discussion of other research and medical applications that are leveraging HGP-derived DNA analysis technologies is included. The multidisciplinary approach to the development of new technologies that has been successful for the HGP provides a paradigm for facilitating new genomic approaches toward understanding the biological role of functional elements and systems within the cell, including those encoded within genomic DNA and their molecular products.

  15. Understanding Student Teachers’ Behavioural Intention to Use Technology: Technology Acceptance Model (TAM Validation and Testing

    Directory of Open Access Journals (Sweden)

    Kung-Teck, Wong

    2013-01-01

    Full Text Available This study sets out to validate and test the Technology Acceptance Model (TAM in the context of Malaysian student teachers’ integration of their technology in teaching and learning. To establish factorial validity, data collected from 302 respondents were tested against the TAM using confirmatory factor analysis (CFA, and structural equation modelling (SEM was used for model comparison and hypotheses testing. The goodness-of-fit test of the analysis shows partial support of the applicability of the TAM in a Malaysian context. Overall, the TAM accounted for 37.3% of the variance in intention to use technology among student teachers and of the five hypotheses formulated, four are supported. Perceived usefulness is a significant influence on attitude towards computer use and behavioural intention. Perceived ease of use significantly influences perceived usefulness, and finally, behavioural intention is found to be influenced by attitude towards computer use. The findings of this research contribute to the literature by validating the TAM in the Malaysian context and provide several prominent implications for the research and practice of technology integration development.

  16. Project planning of Gen-IV sodium cooled fast reactor technology

    International Nuclear Information System (INIS)

    Yoo, Jaewoon; Joo, H. K.; Cho, C. H.; Kim, Y. G.; Lee, D. U.; Jin, M. W.

    2013-05-01

    The project program will be established to shorten the design schedule by sharing the design man power and experimental facility, and by introducing the proven technology through international collaboration and the project plan including preliminary specific design, technology validation and fuel design validation plan will be more detail by reviewing the plan at the International Technical Review Meeting (ITRM). Periodic project progress review meeting will be held to find the technical issues and to resolve them. The results of the progress review meeting will be reflected into the final assessment of research project. The project progress review meeting will be held every quarter and external expert will also participate in the meeting. In parallel with the PGSFR development, innovative small modular SFR will be developed aiming to the international nuclear market. The system and component technologies of both system can be shared but innovative concept will be implemented into the design. Ultra long life core design concept and supercritical CO 2 Brayton cycle will be considered as the innovative concept for enhancing the plant economy and safety

  17. Space technology and robotics in school projects

    Science.gov (United States)

    Villias, Georgios

    2016-04-01

    Space-related educational activities is a very inspiring and attractive way to involve students into science courses, present them the variety of STEM careers that they can follow, while giving them at the same time the opportunity to develop various practical and communication skills necessary for their future professional development. As part of a large scale extracurricular course in Space Science, Space Technology and Robotics that has been introduced in our school, our students, divided in smaller groups of 3-4 students in each, try to understand the challenges that current and future space exploration is facing. Following a mixture of an inquiry-based learning methodology and hands-on practical activities related with constructions and experiments, students get a glimpse of the pre-mentioned fields. Our main goal is to gain practical knowledge and inspiration from the exciting field of Space, to attain an adequate level of team spirit and effective cooperation, while developing technical and research data-mining skills. We use the following two approaches: 1. Constructive (Technical) approach Designing and constructing various customized robotic machines, that will simulate the future space exploration vehicles and satellites needed to study the atmosphere, surface and subsurface of planets, moons or other planetary bodies of our solar system that have shown some promising indications for the existence of life, taking seriously into account their special characteristics and known existing conditions (like Mars, Titan, Europa & Enceladus). The STEM tools we use are the following: - LEGO Mindstorms: to construct rovers for surface exploration. - Hydrobots: an MIT's SeaPerch program for the construction of submarine semi-autonomous robots. - CanSats: Arduino-based microsatellites able to receive, record & transmit data. - Space balloons: appropriate for high altitude atmospheric measurements & photography. 2. Scientific approach Conducting interesting physics

  18. Validation of GPS and accelerometer technology in swimming.

    Science.gov (United States)

    Beanland, Emma; Main, Luana C; Aisbett, Brad; Gastin, Paul; Netto, Kevin

    2014-03-01

    To evaluate the validity of an integrated accelerometer and Global Positioning System (GPS) device to quantify swimming kinematics variables in swimming. Criterion validation study. Twenty-one sub-elite swimmers completed three 100 m efforts (one butterfly, breaststroke and freestyle) in an outdoor 50 m Olympic pool. A GPS device with an integrated tri-axial accelerometer was used to obtain mid-pool velocity and stroke count of each effort. This data was compared to velocity and stroke count data obtained from concurrently recorded digital video of the performance. A strong relationship was detected between the accelerometer stroke count and the video criterion measure for both breaststroke (r>0.98) and butterfly (r>0.99). Also, no significant differences were detected between the GPS velocity and video obtained velocity for both freestyle and breaststroke. There was a significant difference between the GPS velocity and criterion measure for butterfly. Acceptable standard error and 95% limits of agreement were obtained for freestyle (0.13 m s(-1), 0.36 m s(-1)) and breaststroke (0.12 m s(-1), 0.33 m s(-1)) compared to butterfly (0.18 m s(-1), 0.50 m s(-1)). Relative error measurements ranged between 10.2 and 13.4% across the three strokes. The integrated accelerometer and GPS device offers a valid and accurate tool for stroke count quantification in breaststroke and butterfly as well as measuring mid-pool swimming velocity in freestyle and breaststroke. The application of GPS technology in the outdoor training environment suggests advantageous practical benefits for swimmers, coaches and sports scientists. Copyright © 2013 Sports Medicine Australia. All rights reserved.

  19. EDF EPR project: operating principles validation and human factor engineering program

    International Nuclear Information System (INIS)

    Lefebvre, B.; Berard, E.; Arpino, J.-M.

    2005-01-01

    This article describes the specificities of the operating principles chosen by EDF for the EPR project as a result of an extensive Human Factor Engineering program successfully implemented in an industrial project context. The design process and its achievements benefit of the EDF experience feedback not only in term of NPP operation - including the fully computerized control room of the N4-serie - but also in term of NPP designer. The elements exposed hereafter correspond to the basic design phase of EPR HMI which has been completed and successfully validated by the end of 2003. The article aims to remind the context of the project which basically consists in designing a modern and efficient HMI taking into account the operating needs while relying on proven and reliable technologies. The Human Factor Engineering program implemented merges these both aspects by : 1) being fully integrated within the project activities and scheduling; 2) efficiently taking into account the users needs as well as the feasibility constraints by relying on a multidisciplinary design team including HF specialists, I and C specialists, Process specialists and experienced operator representatives. The resulting design process makes a wide use of experience feedback and experienced operator knowledge to complete largely the existing standards for providing a fully useable and successful design method in an industrial context. The article underlines the design process highlights that largely contribute to the successful implementation of a Human Factor Engineering program for EPR. (authors)

  20. Disruption of Information Technology Projects: The Reactive Decoupling of Project Management Methodologies

    Science.gov (United States)

    Schmitz, Kurt W.

    2013-01-01

    Information Technology projects have migrated toward two dominant Project Management (PM) methodologies. Plan-driven practices provide organizational control through highly structured plans, schedules, and specifications that facilitate oversight by hierarchical bureaucracies. In contrast, agile practices emphasize empowered teams using flexible…

  1. Ceramic Technology Project. Semiannual progress report, April 1991--September 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS`s Materials Development Program, was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

  2. U.K. offshore project employs new technologies

    Energy Technology Data Exchange (ETDEWEB)

    Moritis, G.

    1995-12-18

    The Liverpool Bay project, to produce oil and gas from four offshore fields in the British sector of the Irish Sea, includes a number recently developed technologies. GE Power Systems and GE Marine and Industrial Engines says that this project is the first to use its GE LM6000 aeroderivative gas turbine for power generation. On the Lennox platform, Cooper Cameron Corp.`s first platform spool tree was installed. Marine fouling protection of the platforms is provided by LEV Group`s proprietary ocean-powered marine growth preventers. All three technologies are described.

  3. Barriers and Facilitators of Collaborative Management in Technological Innovation Projects

    Directory of Open Access Journals (Sweden)

    Sonia Regina Hierro Parolin

    2013-05-01

    Full Text Available Discussions about innovation tend to a more systemic and cooperative approach in which those networks focused on scientific and technological development are considered. This article aims to identify the barriers and facilitators in the collaborative management process of technological innovation projects and a study has been carried out by the cooperation action for innovation with 17 industries in Brazil. The primary evidence refers to the crucial role of project managers when leading the structural demands, and clarity on the relevance of the communication of strategic guidelines among the organizations involved for the achievement of the results in the industries.

  4. Project Update: Increased Fuel Affordability through Deployable Refining Technology

    Science.gov (United States)

    2016-08-01

    Form 298 (Rev. 8- 98) Prescribed by ANSI Std. 239.18 1 PROJECT UPDATE: INCREASED FUEL AFFORDABILITY THROUGH DEPLOYABLE REFINING TECHNOLOGY August...Generator fuel ~ 1-2 gph Waste extract ~ 20 gph Feed extractant ~ 20 gph Extraction fluid = denatured ( methanol or DB) ethanol / water 70 / 30...Briefing Charts 3. DATES COVERED (From - To) 15 August 2016 – 30 September 2016 4. TITLE AND SUBTITLE Project Update: Increased Fuel Affordability through

  5. Advanced Turbine Technology Applications Project (ATTAP) and Hybrid Vehicle Turbine Engine Technology Support project (HVTE-TS): Final summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    This final technical report was prepared by Rolls-Royce Allison summarizing the multiyear activities of the Advanced Turbine Technology Applications Project (ATTAP) and the Hybrid Vehicle Turbine Engine Technology Support (HVTE-TS) project. The ATTAP program was initiated in October 1987 and continued through 1993 under sponsorship of the US Department of Energy (DOE), Energy Conservation and Renewable Energy, Office of Transportation Technologies, Propulsion Systems, Advanced Propulsion Division. ATTAP was intended to advance the technological readiness of the automotive ceramic gas turbine engine. The target application was the prime power unit coupled to conventional transmissions and powertrains. During the early 1990s, hybrid electric powered automotive propulsion systems became the focus of development and demonstration efforts by the US auto industry and the Department of energy. Thus in 1994, the original ATTAP technology focus was redirected to meet the needs of advanced gas turbine electric generator sets. As a result, the program was restructured to provide the required hybrid vehicle turbine engine technology support and the project renamed HVTE-TS. The overall objective of the combined ATTAP and HVTE-TS projects was to develop and demonstrate structural ceramic components that have the potential for competitive automotive engine life cycle cost and for operating 3,500 hr in an advanced high temperature turbine engine environment. This report describes materials characterization and ceramic component development, ceramic components, hot gasifier rig testing, test-bed engine testing, combustion development, insulation development, and regenerator system development. 130 figs., 12 tabs.

  6. New business opportunity: Green field project with new technology

    Science.gov (United States)

    Lee, Seung Jae; Woo, Jong Hun; Shin, Jong Gye

    2014-06-01

    Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation technology.

  7. New business opportunity: Green field project with new technology

    Directory of Open Access Journals (Sweden)

    Seung Jae Lee

    2014-06-01

    Full Text Available Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation

  8. Distrubtion Tolerant Network Technology Flight Validation Report: DINET

    Science.gov (United States)

    Jones, Ross M.

    2009-01-01

    In October and November of 2008, the Jet Propulsion Laboratory installed and tested essential elements of Delay/Disruption Tolerant Networking (DTN) technology on the Deep Impact spacecraft. This experiment, called Deep Impact Network Experiment (DINET), was performed in close cooperation with the EPOXI project which has responsibility for the spacecraft. During DINET some 300 images were transmitted from the JPL nodes to the spacecraft. Then, they were automatically forwarded from the spacecraft back to the JPL nodes, exercising DTN's bundle origination, transmission, acquisition, dynamic route computation, congestion control, prioritization, custody transfer, and automatic retransmission procedures, both on the spacecraft and on the ground, over a period of 27 days. All transmitted bundles were successfully received, without corruption. The DINET experiment demonstrated DTN readiness for operational use in space missions.

  9. Distribution Tolerant Network Technology Flight Validation Report: DINET

    Science.gov (United States)

    Jones, Ross M.

    2009-01-01

    In October and November of 2008, the Jet Propulsion Laboratory installed and tested essential elements of Delay/Disruption Tolerant Networking (DTN) technology on the Deep Impact spacecraft. This experiment, called Deep Impact Network Experiment (DINET), was performed in close cooperation with the EPOXI project which has responsibility for the spacecraft. During DINET some 300 images were transmitted from the JPL nodes to the spacecraft. Then, they were automatically forwarded from the spacecraft back to the JPL nodes, exercising DTN's bundle origination, transmission, acquisition, dynamic route computation, congestion control, prioritization, custody transfer, and automatic retransmission procedures, both on the spacecraft and on the ground, over a period of 27 days. All transmitted bundles were successfully received, without corruption. The DINET experiment demonstrated DTN readiness for operational use in space missions.

  10. Pipeline cost reduction through effective project management and applied technology

    Energy Technology Data Exchange (ETDEWEB)

    Jenkins, A. [TransCanada Pipeline Ltd., Alberta (Canada); Babuk, T. [Empress International Inc., Westwood, NJ (United States); Mohitpour, M. [Tempsys Pipeline Solutions Inc., Vancouver, BC (Canada); Murray, M.A. [National Energy Board of Canada (Canada)

    2005-07-01

    Pipelines are regarded by many as passive structures with the technology involved in their construction and operation being viewed as relatively simple and stable. If such is the case how can there be much room for cost improvement? In reality, there have been many technological and regulatory innovations required within the pipeline industry to meet the challenges posed by ever increasing consumer demand for hydrocarbons, the effects of aging infrastructure and a need to control operating and maintenance expenditures. The importance of technology management, as a subset of overall project management, is a key element of life cycle cost control. Assurance of public safety and the integrity of the system are other key elements in ensuring a successful pipeline project. The essentials of best practise project management from an owner/ operator's perspective are set out in the paper. Particular attention is paid to the appropriate introduction of new technology, strategic procurement practice and material selection, indicating that capital cost savings of up to 15% are achievable without harming life cycle cost. The value of partnering leading to technical innovation, cost savings and improved profitability for all the participants is described. Partnering also helps avoid duplicated effort through the use of common tools for design, planning schedule tracking and reporting. Investing in appropriate technology development has been a major source of cost reduction in recent years and the impact of a number of these recently introduced technologies in the areas of materials, construction processes and operation and maintenance are discussed in the paper. (author)

  11. Electric Ground Support Equipment Advanced Battery Technology Demonstration Project at the Ontario Airport

    Energy Technology Data Exchange (ETDEWEB)

    Tyler Gray; Jeremy Diez; Jeffrey Wishart; James Francfort

    2013-07-01

    The intent of the electric Ground Support Equipment (eGSE) demonstration is to evaluate the day-to-day vehicle performance of electric baggage tractors using two advanced battery technologies to demonstrate possible replacements for the flooded lead-acid (FLA) batteries utilized throughout the industry. These advanced battery technologies have the potential to resolve barriers to the widespread adoption of eGSE deployment. Validation testing had not previously been performed within fleet operations to determine if the performance of current advanced batteries is sufficient to withstand the duty cycle of electric baggage tractors. This report summarizes the work performed and data accumulated during this demonstration in an effort to validate the capabilities of advanced battery technologies. This report summarizes the work performed and data accumulated during this demonstration in an effort to validate the capabilities of advanced battery technologies. The demonstration project also grew the relationship with Southwest Airlines (SWA), our demonstration partner at Ontario International Airport (ONT), located in Ontario, California. The results of this study have encouraged a proposal for a future demonstration project with SWA.

  12. Information Technology: The Defense Advanced Research Projects Agency's Transition of Advanced Information Technology Programs

    National Research Council Canada - National Science Library

    Ugone, Mary

    2002-01-01

    .... The Defense Advanced Research Projects Agency's mission is to develop imaginative, innovative, and often high-risk research ideas offering a significant technological impact on DoD and commercial systems...

  13. Calibration/Validation Technology for the CO2 Satellite Project

    Data.gov (United States)

    National Aeronautics and Space Administration — AOS has shown that it is feasible to use the combined NASA/SBIR resources from Phases I and II to: (i) Build a turn-key analyzer system that has the...

  14. Biomedical Monitoring By A Novel Noncontact Radio Frequency Technology Project

    Science.gov (United States)

    Oliva-Buisson, Yvette J. (Compiler)

    2014-01-01

    The area of Space Health and Medicine is one of the NASA's Space Technology Grand Challenges. Space is an extreme environment which is not conducive to human life. The extraterrestrial environment can result in the deconditioning of various human physiological systems and thus require easy to use physiological monitoring technologies in order to better monitor space crews for appropriate health management and successful space missions and space operations. Furthermore, the Space Technology Roadmap's Technology Area Breakdown Structure calls for improvements in research to support human health and performance (Technology Area 06). To address these needs, this project investigated a potential noncontact and noninvasive radio frequency-based technique of monitoring central hemodynamic function in human research subjects in response to orthostatic stress.

  15. 105-C Reactor interim safe storage project technology integration plan

    International Nuclear Information System (INIS)

    Pulsford, S.K.

    1997-01-01

    The 105-C Reactor Interim Safe Storage Project Technology Integration Plan involves the decontamination, dismantlement, and interim safe storage of a surplus production reactor. A major goal is to identify and demonstrate new and innovative D and D technologies that will reduce costs, shorten schedules, enhance safety, and have the potential for general use across the RL complex. Innovative technologies are to be demonstrated in the following areas: Characterization; Decontamination; Waste Disposition; Dismantlement, Segmentation, and Demolition; Facility Stabilization; and Health and Safety. The evaluation and ranking of innovative technologies has been completed. Demonstrations will be selected from the ranked technologies according to priority. The contractor team members will review and evaluate the demonstration performances and make final recommendations to DOE

  16. Didactics, Technology, and Organisation of Project Based Distance Education

    DEFF Research Database (Denmark)

    Knudsen, Morten Haack; Borch, Ole M.; Helbo, Jan

    2005-01-01

    The didactics, technology, and organization of an ICT supported distance engineering Master education are described. A systematic monitoring and evaluation of the basis year has given useful experience, subsequently used for adjustments and improvements. A successful on-campus project organized...

  17. Ubiquitous Learning Project Using Life-Logging Technology in Japan

    Science.gov (United States)

    Ogata, Hiroaki; Hou, Bin; Li, Mengmeng; Uosaki, Noriko; Mouri, Kosuke; Liu, Songran

    2014-01-01

    A Ubiquitous Learning Log (ULL) is defined as a digital record of what a learner has learned in daily life using ubiquitous computing technologies. In this paper, a project which developed a system called SCROLL (System for Capturing and Reusing Of Learning Log) is presented. The aim of developing SCROLL is to help learners record, organize,…

  18. Accessing Curriculum Through Technology Tools (ACTTT): A Model Development Project

    Science.gov (United States)

    Daytner, Katrina M.; Johanson, Joyce; Clark, Letha; Robinson, Linda

    2012-01-01

    Accessing Curriculum Through Technology Tools (ACTTT), a project funded by the U.S. Office of Special Education Programs (OSEP), developed and tested a model designed to allow children in early elementary school, including those "at risk" and with disabilities, to better access, participate in, and benefit from the general curriculum.…

  19. Proceedings of the Nuclear Criticality Technology and Safety Project Workshop

    International Nuclear Information System (INIS)

    Sanchez, R.G.

    1994-01-01

    This report is the proceedings of the annual Nuclear Criticality Technology and Safety Project (NCTSP) Workshop held in Monterey, California, on April 16--28, 1993. The NCTSP was sponsored by the Department of Energy and organized by the Los Alamos Critical Experiments Facility. The report is divided into six sections reflecting the sessions outlined on the workshop agenda

  20. Proceedings of the Nuclear Criticality Technology and Safety Project Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, R.G. [comp.

    1994-01-01

    This report is the proceedings of the annual Nuclear Criticality Technology and Safety Project (NCTSP) Workshop held in Monterey, California, on April 16--28, 1993. The NCTSP was sponsored by the Department of Energy and organized by the Los Alamos Critical Experiments Facility. The report is divided into six sections reflecting the sessions outlined on the workshop agenda.

  1. Materials Development Program: Ceramic Technology Project bibliography, 1984--1992

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The Ceramic Technology [for Advanced Heat Engines] Project was begun in 1983 to meet the ceramic materials needs of the companion DOE automotive engine program, the Advanced Gas Turbine (AGT) project, and the Heavy Duty Transport (low-heat-rejection, heavy-duty diesel) project. Goal is to develop an industry technology base for reliable and cost effective ceramics for applications in advanced automotive gas turbine and diesel engines. Research areas were identified following extensive input from industry and academia. Majority of research is done by industry (60%); work is also done at colleges and universities, in-house, and at other national laboratories and government agencies. In the beginning, reliability of ceramic components was the key issue. The reliability issues have largely been met and, at the present time, cost is the driving issue, especially in light of the highly cost-sensitive automotive market. Emphasis of the program has now been shifted toward developing cost-effective ceramic components for high-performance engines in the near-term. This bibliography is a compilation of publications done in conjunction with the Ceramic Technology Project since its beginning. Citations were obtained from reports done by participants in the project. We have tried to limit citations to those published and easily located. The end date of 1992 was selected.

  2. Advanced Air Transportation Technologies Project, Final Document Collection

    Science.gov (United States)

    Mogford, Richard H.; Wold, Sheryl (Editor)

    2008-01-01

    This CD ROM contains a compilation of the final documents of the Advanced Air Transportation Technologies (AAIT) project, which was an eight-year (1996 to 2004), $400M project managed by the Airspace Systems Program office, which was part of the Aeronautics Research Mission Directorate at NASA Headquarters. AAIT focused on developing advanced automation tools and air traffic management concepts that would help improve the efficiency of the National Airspace System, while maintaining or enhancing safety. The documents contained in the CD are final reports on AAIT tasks that serve to document the project's accomplishments over its eight-year term. Documents include information on: Advanced Air Transportation Technologies, Autonomous Operations Planner, Collaborative Arrival Planner, Distributed Air/Ground Traffic Management Concept Elements 5, 6, & 11, Direct-To, Direct-To Technology Transfer, Expedite Departure Path, En Route Data Exchange, Final Approach Spacing Tool - (Active and Passive), Multi-Center Traffic Management Advisor, Multi Center Traffic Management Advisor Technology Transfer, Surface Movement Advisor, Surface Management System, Surface Management System Technology Transfer and Traffic Flow Management Research & Development.

  3. Final Technical Report: Controlled Hydrogen Fleet and Infrastructure Demonstration and Validation Project

    Energy Technology Data Exchange (ETDEWEB)

    Ronald Grasman

    2011-12-31

    This report summarizes the work conducted under U.S. Department of Energy (DOE) under contract DE-FC36-04GO14285 by Mercedes-Benz & Research Development, North America (MBRDNA), Chrysler, Daimler, Mercedes Benz USA (MBUSA), BP, DTE Energy and NextEnergy to validate fuel cell technologies for infrastructure, transportation as well as assess technology and commercial readiness for the market. The Mercedes Team, together with its partners, tested the technology by operating and fueling hydrogen fuel cell vehicles under real world conditions in varying climate, terrain and driving conditions. Vehicle and infrastructure data was collected to monitor the progress toward the hydrogen vehicle and infrastructure performance targets of $2.00 to 3.00/gge hydrogen production cost and 2,000-hour fuel cell durability. Finally, to prepare the public for a hydrogen economy, outreach activities were designed to promote awareness and acceptance of hydrogen technology. DTE, BP and NextEnergy established hydrogen filling stations using multiple technologies for on-site hydrogen generation, storage and dispensing. DTE established a hydrogen station in Southfield, Michigan while NextEnergy and BP worked together to construct one hydrogen station in Detroit. BP constructed another fueling station in Burbank, California and provided a full-time hydrogen trailer at San Francisco, California and a hydrogen station located at Los Angeles International Airport in Southern, California. Stations were operated between 2005 and 2011. The Team deployed 30 Gen I Fuel Cell Vehicles (FCVs) in the beginning of the project. While 28 Gen I F-CELLs used the A-Class platform, the remaining 2 were Sprinter delivery vans. Fuel cell vehicles were operated by external customers for real-world operations in various regions (ecosystems) to capture various driving patterns and climate conditions (hot, moderate and cold). External operators consisted of F-CELL partner organizations in California and Michigan

  4. Demonstration Project 111, ITS/CVO Technology Truck, Final Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Gambrell, KP

    2002-01-11

    In 1995, the planning and building processes began to design and develop a mobile demonstration unit that could travel across the nation and be used as an effective outreach tool. In 1997, the unit was completed; and from June 1997 until December 2000, the Federal Highway Administration (FHWA)/Federal Motor Carrier Safety Administration (FMCSA) mobilized the Technology Truck, also known as Demonstration Project No. 111, ''Advanced Motor Carrier Operations and Safety Technologies.'' The project featured the latest available state-of-the-practice intelligent transportation systems (ITS) technologies designed to improve both the efficiency and safety of commercial vehicle operations (CVO). The Technology Truck was designed to inform and educate the motor carrier community and other stakeholders regarding ITS technologies, thus gaining support and buy-in for participation in the ITS program. The primary objective of the project was to demonstrate new and emerging ITS/CVO technologies and programs, showing their impact on motor carrier safety and productivity. In order to meet the objectives of the Technology Truck project, the FHWA/FMCSA formed public/private partnerships with industry and with Oak Ridge National Laboratory to demonstrate and display available ITS/CVO technologies in a cooperative effort. The mobile demonstration unit was showcased at national and regional conferences, symposiums, universities, truck shows and other venues, in an effort to reach as many potential users and decision makers as possible. By the end of the touring phase, the ITS/CVO Technology Truck had been demonstrated in 38 states, 4 Canadian provinces, 88 cities, and 114 events; been toured by 18,099 people; and traveled 115,233 miles. The market penetration for the Technology Truck exceeded 4,000,000, and the website received more than 25,000 hits. In addition to the Truck's visits, the portable ITS/CVO kiosk was demonstrated at 31 events in 23 cites in 15

  5. Ceramic Technology Project semiannual progress report, April 1992--September 1992

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1993-07-01

    This project was developed to meet the ceramic technology requirements of the DOE Office of Transportation Systems` automotive technology programs. Significant progress in fabricating ceramic components for DOE, NASA, and DOE advanced heat engine programs show that operation of ceramic parts in high-temperature engines is feasible; however, addition research is needed in materials and processing, design, and data base and life prediction before industry will have a sufficient technology base for producing reliable cost-effective ceramic engine components commercially. A 5-yr project plan was developed, with focus on structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines.

  6. Validation methodology focussing on fuel efficiency as applied in the eCoMove project

    NARCIS (Netherlands)

    Themann, P.; Iasi, L.; Larburu, M.; Trommer, S.

    2012-01-01

    This paper discusses the validation approach applied in the eCoMove project (a large scale EU 7th Framework Programme project). In this project, applications are developed that on the one hand optimise network-wide traffic management and control, and on the other hand advise drivers on the most

  7. Learning to make technology work - a study of learning in technology demonstration projects

    DEFF Research Database (Denmark)

    Sutherland Olsen, Dorothy; Andersen, Per Dannemand

    2014-01-01

    participants, including users. The aim of the project is usually to test the technology and promote changes in users habits, while learning is frequently cited as the main outcome. In this paper we review existing studies of demonstration projects and try to gain an overview of the main aims and effects......Building working demonstrations of new technologies within sustainable energy and transport has become an important activity in the move towards a more energy efficient society. The work involved in building these demonstrations is usually organised in a project with a variety of different...

  8. Technology Education in South Africa: Evaluating an Innovative Pilot Project

    Science.gov (United States)

    Stables, Kay; Kimbell, Richard

    2001-02-01

    Researchers from Goldsmiths College were asked to undertake an evaluation of a three year curriculum initiative introducing technology education, through a learner-centred, problem solving and collaborative approach. The program was developed in a group of high schools in the North West Province of South Africa. We visited ten schools involved in the project and ten parallel schools not involved who acted as a control group. We collected data on student capability (demonstrated through an innovative test activity) and on student attitudes towards technology (demonstrated in evaluation questionnaires and in semi-structured interviews). Collectively the data indicate that in areas of knowledge and skill and in certain aspects of procedures (most notably problem solving) the project has had a marked impact. We also illustrate that greater consideration could have been given in the project to developing skills in generating and developing ideas and in graphic communication. Gender differences are noted, particularly in terms of positive attitudes illustrated by both boys and girls from schools involved in the project. Attention is drawn to the critical impact the project has had on transforming the pedagogy of the teachers from a teacher-centred didactic model, to a learner-centred, problem solving model. Some wider implications of the successes of this project are debated.

  9. Integrated Medical Model (IMM) Project Verification, Validation, and Credibility (VVandC)

    Science.gov (United States)

    Walton, M.; Boley, L.; Keenan, L.; Kerstman, E.; Shah, R.; Young, M.; Saile, L.; Garcia, Y.; Meyers, J.; Reyes, D.

    2015-01-01

    The Integrated Medical Model (IMM) Project supports end user requests by employing the Integrated Medical Evidence Database (iMED) and IMM tools as well as subject matter expertise within the Project. The iMED houses data used by the IMM. The IMM is designed to forecast relative changes for a specified set of crew health and mission success risk metrics by using a probabilistic model based on historical data, cohort data, and subject matter expert opinion. A stochastic approach is taken because deterministic results would not appropriately reflect the uncertainty in the IMM inputs. Once the IMM was conceptualized, a plan was needed to rigorously assess input information, framework and code, and output results of the IMM, and ensure that end user requests and requirements were considered during all stages of model development and implementation, as well as lay the foundation for external review and application. METHODS: In 2008, the Project team developed a comprehensive verification and validation (VV) plan, which specified internal and external review criteria encompassing 1) verification of data and IMM structure to ensure proper implementation of the IMM, 2) several validation techniques to confirm that the simulation capability of the IMM appropriately represents occurrences and consequences of medical conditions during space missions, and 3) credibility processes to develop user confidence in the information derived from the IMM. When the NASA-STD-7009 (7009) [1] was published, the Project team updated their verification, validation, and credibility (VVC) project plan to meet 7009 requirements and include 7009 tools in reporting VVC status of the IMM. Construction of these tools included meeting documentation and evidence requirements sufficient to meet external review success criteria. RESULTS: IMM Project VVC updates are compiled recurrently and include updates to the 7009 Compliance and Credibility matrices. Reporting tools have evolved over the lifetime of

  10. Risk Management in Information Technology Project: An Empirical Study

    Directory of Open Access Journals (Sweden)

    Kornelius Irfandhi

    2016-09-01

    Full Text Available The companies are facing some risks due to changes in a dynamic environment. If risks are not managed properly, it will have some negative impacts on the companies at the present and the future. One important function of the Information Technology (IT governance is risk management. Risk management in IT project aims to provide a safe environment for IT projects undertaken. Risk management becomes an important process for the success of IT projects. This article discussed the risk of IT project and whether there was a relationship between risk management and the success of the project. The method used was performing a literature review of several scientific articles which published between 2010 and 2014. The results of this study are the presence of risk management and risk manager influence the success of the project. Risk analysis and risk monitoring and control also have a relationship with the subjective performance of IT projects. If risk management is applied properly, the chance of the success of the projects undertaken can be increased. 

  11. The EGS Collab Project: Stimulation Investigations for Geothermal Modeling Analysis and Validation

    Science.gov (United States)

    Blankenship, D.; Kneafsey, T. J.

    2017-12-01

    The US DOE's EGS Collab project team is establishing a suite of intermediate-scale ( 10-20 m) field test beds for coupled stimulation and interwell flow tests. The multiple national laboratory and university team is designing the tests to compare measured data to models to improve measurement and modeling toolsets available for use in field sites and investigations such as DOE's Frontier Observatory for Research in Geothermal Energy (FORGE) Project. Our tests will be well-controlled, in situexperiments focused on rock fracture behavior, seismicity, and permeability enhancement. Pre- and post-test modeling will allow for model prediction and validation. High-quality, high-resolution geophysical and other fracture characterization data will be collected, analyzed, and compared with models and field observations to further elucidate the basic relationships between stress, induced seismicity, and permeability enhancement. Coring through the stimulated zone after tests will provide fracture characteristics that can be compared to monitoring data and model predictions. We will also observe and quantify other key governing parameters that impact permeability, and attempt to understand how these parameters might change throughout the development and operation of an Enhanced Geothermal System (EGS) project with the goal of enabling commercial viability of EGS. The Collab team will perform three major experiments over the three-year project duration. Experiment 1, intended to investigate hydraulic fracturing, will be performed in the Sanford Underground Research Facility (SURF) at 4,850 feet depth and will build on kISMET Project findings. Experiment 2 will be designed to investigate hydroshearing. Experiment 3 will investigate changes in fracturing strategies and will be further specified as the project proceeds. The tests will provide quantitative insights into the nature of stimulation (e.g., hydraulic fracturing, hydroshearing, mixed-mode fracturing, thermal fracturing

  12. OPTIMIZING OUTCOME IN THE UNIVERSITY-INDUSTRY TECHNOLOGY TRANSFER PROJECTS

    Directory of Open Access Journals (Sweden)

    Hamed ALAVI

    2016-04-01

    Full Text Available Transferring inventions of academic scientists to private enterprises for the purpose of commercialization is long known as University-Industry (firm Technology Transfer While the importance of this phenomenon is simultaneously raising in public and private sector, only a part of patented academic inventions succeed in passing the process of commercialization. Despite the fact that formal Technology Transfer process and licencing of patented innovations to third party is the main legal tool for safeguarding rights of academic inventors in commercialization of their inventions, it is not sufficient for transmitting tacit knowledge which is necessary in exploitation of transferred technology. Existence of reciprocal and complementary relations between formal and informal technology transfer process has resulted in formation of different models for university-industry organizational collaboration or even integration where licensee firms keep contact with academic inventors after gaining legal right for commercialization of their patented invention. Current paper argues that despite necessity for patents to legally pass the right of commercialization of an invention, they are not sufficient for complete knowledge transmission in the process of technology transfer. Lack of efficiency of formal mechanism to end the Technology Transfer loop makes an opportunity to create innovative interpersonal and organizational connections among patentee and licensee company. With emphasize on need for further elaboration of informal mechanisms as critical and underappreciated aspect of technology transfer process, article will try to answer the questions of how to optimize knowledge transmission process in the framework of University-Industry Technology Transfer Projects? What is the theoretical basis for university-industry technology transfer process? What are organization collaborative models which can enhance overall performance by improving transmission of

  13. Development and Validation of Information Technology Mentor Teacher Attitude Scale: A Pilot Study

    Science.gov (United States)

    Saltan, Fatih

    2015-01-01

    The aim of this study development and validation of a teacher attitude scale toward Information Technology Mentor Teachers (ITMT). ITMTs give technological support to other teachers for integration of technology in their lessons. In the literature, many instruments have been developed to measure teachers' attitudes towards the technological tools…

  14. Technology and commercial supply of components for the LHC project

    CERN Document Server

    Faugeras, Paul E

    1998-01-01

    After a brief reminder of the motives and the outline of the Large Hadron Collider (LHC) project, one will review the technology and the hardware to be built up. The LHC calls for High Tech innovation s in superconductivity, cryogenics with superfluid helium, ultra high vacuum, surface treatments, etc. which have to be transferred to Industry and produced on a large scale. It will also make extensi ve use of more conventional technology, but because of the intrinsic complexity of the machine and of the international nature of its funding and procurement sources, it will require sophisticated man agement and logistics tools to minimize costs and installation time. The planning for the whole project will be given with an indication of the nature and time schedule of the major contracts.

  15. A Tailored Systems Engineering Framework for Science and Technology Projects

    Science.gov (United States)

    2009-03-01

    developments, and maybe even humanity’s grand challenges [ NAE , 2008]) and allows scientists, technologists, engineers, and project managers the opportunity...application (in which case the process is usually executed at the TD level), or cross- and multi-discipline technology solutions (executed at the enterprise...E. Director, United States Air Force Center for Systems Engineering, Wright-Patterson AFB OH. Personal Interview. 21 July 2008. [ NAE , 2008

  16. ECUT (Energy Conversion and Utilization Technologies) program: Biocatalysis project

    Science.gov (United States)

    Baresi, Larry

    1989-01-01

    The Annual Report presents the fiscal year (FY) 1988 research activities and accomplishments, for the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Division. The ECUT Biocatalysis Project is managed by the Jet Propulsion Laboratory, California Institute of Technology. The Biocatalysis Project is a mission-oriented, applied research and exploratory development activity directed toward resolution of the major generic technical barriers that impede the development of biologically catalyzed commercial chemical production. The approach toward achieving project objectives involves an integrated participation of universities, industrial companies and government research laboratories. The Project's technical activities were organized into three work elements: (1) The Molecular Modeling and Applied Genetics work element includes research on modeling of biological systems, developing rigorous methods for the prediction of three-dimensional (tertiary) protein structure from the amino acid sequence (primary structure) for designing new biocatalysis, defining kinetic models of biocatalyst reactivity, and developing genetically engineered solutions to the generic technical barriers that preclude widespread application of biocatalysis. (2) The Bioprocess Engineering work element supports efforts in novel bioreactor concepts that are likely to lead to substantially higher levels of reactor productivity, product yields and lower separation energetics. Results of work within this work element will be used to establish the technical feasibility of critical bioprocess monitoring and control subsystems. (3) The Bioprocess Design and Assessment work element attempts to develop procedures (via user-friendly computer software) for assessing the energy-economics of biocatalyzed chemical production processes, and initiation of technology transfer for advanced bioprocesses.

  17. Implementing Biogas Technology Project in Malvar, Batangas, Philippines

    Directory of Open Access Journals (Sweden)

    Juvy G. Mojares

    2015-11-01

    Full Text Available This study sought to determine the environmental and social impacts of the biogas technology project of the municipal government of Malvar, Batangas, Philippines, through the Municipal Environment and Natural Resources Office. Document analysis and interview were employed in this study. Results showed that heat and electricity generation from biogas decreased dependency on electricity and fuel oil.In terms of social impacts, the biogas technology contributed to socio-economic improvement of the barangay in the form of job creation, technological and skills transfer through training in biogas production, contribution to continuous pursuing of energy neutrality and encouraged sustainability development at the community level. Aside from these, the technology was a source of organic fertilizer for the farming community of Malvar. It is recommended that commercial farms be strictly monitored and ordinances be imposed on them specifically on the use of biogas technology. The municipal government could partner with GOs and NGOs providing grant or equipment for such technology. For the monitoring of backyard farms, develop close coordination with barangay officials, if it does not work, plan a consultative meeting with agencies concerned to explain the hazards of improper disposal of hog wastes.

  18. Rationale and methods of the European Food Consumption Validation (EFCOVAL) Project

    NARCIS (Netherlands)

    Boer, de E.J.; Slimani, N.; Boeing, H.; Feinberg, M.; Leclerq, C.; Trolle, E.; Amiano, P.; Andersen, L.F.; Freisling, H.; Geelen, A.; Harttig, U.; Huybrechts, I.; Kaic-Rak, A.; Lafay, L.; Lillegaard, I.T.L.; Ruprich, J.; Vries, de J.H.M.; Ocke, M.C.

    2011-01-01

    Background/Objectives: The overall objective of the European Food Consumption Validation (EFCOVAL) Project was to further develop and validate a trans-European food consumption method to be used for the evaluation of the intake of foods, nutrients and potentially hazardous chemicals within the

  19. Technology Foresight For Youth: A Project For Science and Technology Education in Sweden

    Science.gov (United States)

    Kendal, Anne Louise

    "Technology Foresight for Youth" is a project run by two science museums, two science centres and "Technology Foresight (Sweden)" an organization in which both business and scientists are represented. The project is designed to strengthen young people's interest in ongoing technological work, research and education. It should give them confidence in their own ability both to understand today's techniques including its influence on people's daily lives, and to influence future developments. One part of the project is aimed at school teachers, teacher cooperation groups and students in the age group 12 to 18 years. A second part encourages dialog and meetings by arranging debates, seminars, theatre, science demonstrations in cooperation with business representatives and scientists. A third important part of the project is a special exhibition to be shown at the four cooperating institutions: "To be where I am not - young people's dreams about the future". The exhibition is meant to be sensual, interactive and partly virtual. It will change and grow with time as young people contribute with their thoughts, visions and challenges. Young people in different parts of the country will be able to interact electronically with each other and with the virtual part of the exhibition. The main aim of the project is to develop new interactive pedagogic methods for science and technology based on young people's own visions about the future.

  20. Waste-to-energy technologies and project implementation

    CERN Document Server

    Rogoff, Marc J

    2011-01-01

    This book covers in detail programs and technologies for converting traditionally landfilled solid wastes into energy through waste-to-energy projects. Modern Waste-to-Energy plants are being built around the world to reduce the levels of solid waste going into landfill sites and contribute to renewable energy and carbon reduction targets. The latest technologies have also reduced the pollution levels seen from early waste incineration plants by over 99 per cent. With case studies from around the world, Rogoff and Screve provide an insight into the different approaches taken to the planning and implementation of WTE. The second edition includes coverage of the latest technologies and practical engineering challenges as well as an exploration of the economic and regulatory context for the development of WTE.

  1. Some aspects concerning the implementation of a fuel technology project

    International Nuclear Information System (INIS)

    Andreescu, N.; Alecu, M.; Mirion, I.

    1977-01-01

    The nuclear power programme in Romania envisages that until 1990 there will be installed about 6000 MWe in nuclear power plants. In order to put into practice such a nuclear programme there will be necessary high investments, possible to be achieved only by the ever increasing participation of the Romanian industry. With a view to this purpose, the Romanian authorities pay great attention to the research and development of the nuclear fuel manufacturing technology. Some research started in 1968-1969 and was intensified later in 1971 when the Institute for Nuclear Technology was founded and in 1972 when the IAEA-UNDP programme ''Development of Nuclear Technology in Romania'' started. This programme was conceived to deal with; 1. technology of UO2 powder and pellet fabrication; 2. manufacturing technology of fuel rods and bundle; 3. irradiation test of fuel rods; 4. development of various activities connected to fuel technology (thermal transfer loops, corrosion tests, neutronic, thermal and hydrodynamical calculations). Within the IAEA-UNDP project a demonstration facility was installed at INT where a great number of the works, resulting from the above mentioned directions, were performed. As a result of these works, at the end of 1975 in the demonstration facility there were manufactured in a reproducible way fuel rods according to the required specifications. The paper further presents the adopted irradiation testing programme, the out-of-pile testing programme, as well as some performances obtained during the different phases of the whole project. There have been conceived and manufactured some equipment meant for fabrication, tests, or for current control. The paper also shows some aspects connected to the personnel formation, as well as some aspects that will have to be solved in order to make possible the step from the demonstration facility to a fuel plant

  2. Pilot Project Technology Business Case: Mobile Work Packages

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lawrie, Sean [ScottMadden, Inc., Raleigh, NC (United States); Niedermuller, Josef [ScottMadden, Inc., Raleigh, NC (United States)

    2015-05-01

    Performance advantages of the new pilot project technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on demonstrating actual cost reductions that can be credited to budgets and thereby truly reduce O&M or capital costs. Technology enhancements, while enhancing work methods and making work more efficient, often fail to eliminate workload such that it changes overall staffing and material cost requirements. It is critical to demonstrate cost reductions or impacts on non-cost performance objectives in order for the business case to justify investment by nuclear operators. The Business Case Methodology (BCM) was developed in September of 2015 to frame the benefit side of II&C technologies to address the “benefit” side of the analysis—as opposed to the cost side—and how the organization evaluates discretionary projects (net present value (NPV), accounting effects of taxes, discount rates, etc.). The cost and analysis side is not particularly difficult for the organization and can usually be determined with a fair amount of precision (not withstanding implementation project cost overruns). It is in determining the “benefits” side of the analysis that utilities have more difficulty in technology projects and that is the focus of this methodology. The methodology is presented in the context of the entire process, but the tool provided is limited to determining the organizational benefits only. This report describes a the use of the BCM in building a business case for mobile work packages, which includes computer-based procedures and other automated elements of a work package. Key to those impacts will be identifying where the savings are

  3. Validity of projective drawing indices of male homosexuality.

    Science.gov (United States)

    Bovan, James; Craig, Robert J

    2002-02-01

    We investigated the hypothesis that certain signs in the Draw-A-Person projective technique reflect male homosexuality. Human figure drawings from gay and 88 heterosexual men, with no clinical psychological symptoms, were submitted to trained raters who were blind to the purpose of this research. The raters independently judged whether 21 signs, previously referenced in the literature as suggestive of male homosexuality, were present in the figure drawings. Only two signs, hair and hips, differentiated between groups. Results were interpreted in the light of changing social attitudes towards homosexuals and methodological problems of prior studies.

  4. Ella-V and technology usage technology usage in an english language and literacy acquisition validation randomized controlled trial study

    OpenAIRE

    Roisin P. Corcoran; Steven M. Ross; Beverly J. Irby; Fuhui Tong; Rafael Lara-Alecio; Cindy Guerrero

    2014-01-01

    This paper describes the use of technology to provide virtual professional development (VPD) for teachers and to conduct classroom observations in a study of English Language Learner (ELL) instruction in grades K–3. The technology applications were part of a cluster randomized control trial (RCT) design for a federally funded longitudinal validation study of a particular program, English Language and Literacy Acquisition-Validation, ELLA- V, to determine its degree of impact on English oral l...

  5. Evolution of the JPSS Ground Project Calibration and Validation System

    Science.gov (United States)

    Purcell, Patrick; Chander, Gyanesh; Jain, Peyush

    2016-01-01

    The Joint Polar Satellite System (JPSS) is the National Oceanic and Atmospheric Administration's (NOAA) next-generation operational Earth observation Program that acquires and distributes global environmental data from multiple polar-orbiting satellites. The JPSS Program plays a critical role to NOAA's mission to understand and predict changes in weather, climate, oceans, coasts, and space environments, which supports the Nation's economy and protection of lives and property. The National Aeronautics and Space Administration (NASA) is acquiring and implementing the JPSS, comprised of flight and ground systems, on behalf of NOAA. The JPSS satellites are planned to fly in the afternoon orbit and will provide operational continuity of satellite-based observations and products for NOAA Polar-orbiting Operational Environmental Satellites (POES) and the Suomi National Polar-orbiting Partnership (SNPP) satellite. To support the JPSS Calibration and Validation (CalVal) node Government Resource for Algorithm Verification, Independent Test, and Evaluation (GRAVITE) services facilitate: Algorithm Integration and Checkout, Algorithm and Product Operational Tuning, Instrument Calibration, Product Validation, Algorithm Investigation, and Data Quality Support and Monitoring. GRAVITE is a mature, deployed system that currently supports the SNPP Mission and has been in operations since SNPP launch. This paper discusses the major re-architecture for Block 2.0 that incorporates SNPP lessons learned, architecture of the system, and demonstrates how GRAVITE has evolved as a system with increased performance. It is now a robust, stable, reliable, maintainable, scalable, and secure system that supports development, test, and production strings, replaces proprietary and custom software, uses open source software, and is compliant with NASA and NOAA standards.

  6. Validation and intercomparison of Persistent Scatterers Interferometry: PSIC4 project results

    NARCIS (Netherlands)

    Raucoules, D.; Bourgine, B.; Michele, M. de; Le Cozannet, G.; Closset, L.; Bremmer, C.; Veldkamp, H.; Tragheim, D.; Bateson, L.; Crosetto, M.; Agudo, M.; Engdahl, M.

    2009-01-01

    This article presents the main results of the Persistent Scatterer Interferometry Codes Cross Comparison and Certification for long term differential interferometry (PSIC4) project. The project was based on the validation of the PSI (Persistent Scatterer Interferometry) data with respect to

  7. Brazilian Irradiation Project: CAFE-MOD1 validation experimental program

    International Nuclear Information System (INIS)

    Mattos, Joao Roberto Loureiro de; Costa, Antonio Carlos L. da; Esteves, Fernando Avelar; Dias, Marcio Soares

    1999-01-01

    The Brazilian Irradiation Project whose purpose is to provide Brazil with a minimal structure to qualify the design, fabrication and quality procedures of nuclear fuels, consists of three main facilities: IEA-R1 reactor of IPEN-CNEN/SP, CAFE-MOD1 irradiation device and a unit of hot cells. The CAFE-MOD1 is based on concepts successfully used for more than 20 years in the main nuclear institutes around the world. Despite these concepts are already proved it should be adapted to each reactor condition. For this purpose, there is an ongoing experimental program aiming at the certification of the criteria and operational limits of the CAFE-MOD1 in order to get the allowance for its installation at the IEA-R1 reactor. (author)

  8. Business planning innovative projects: the essence of technology, advantages and disadvantages

    OpenAIRE

    S.V. Knyaz; N.G. Georgiadi; Y.S. Bogiv

    2012-01-01

    The article substantiates the necessity to develop technology business planning innovative projects. Arguments made by the ground analysis of the advantages and disadvantages of existing business planning technologies.

  9. Bringing Technology to Students' Proximity: A Sociocultural Account of Technology-Based Learning Projects

    Science.gov (United States)

    Mukama, Evode

    2014-01-01

    This paper depicts a study carried out in Rwanda concerning university students who participated in a contest to produce short documentary films. The purpose of this research is to conceptualize these kinds of technology-based learning projects (TBLPs) through a sociocultural perspective. The methodology included focus group discussions and field…

  10. Laboratory technology research - abstracts of FY 1997 projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of this country: the world-class basic research capability of the DOE Energy Research (ER) multi-program national laboratories and the unparalleled entrepreneurial spirit of American industry. A distinguishing feature of the ER multi-program national laboratories is their ability to integrate broad areas of science and engineering in support of national research and development goals. The LTR program leverages this strength for the Nation`s benefit by fostering partnerships with US industry. The partners jointly bring technology research to a point where industry or the Department`s technology development programs can pursue final development and commercialization. Projects supported by the LTR program are conducted by the five ER multi-program laboratories. These projects explore the applications of basic research advances relevant to DOE`s mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials; intelligent processing/manufacturing research; and sustainable environments.

  11. Bringing Technology to Students’ Proximity: A Sociocultural Account of Technology-Based Learning Projects

    Directory of Open Access Journals (Sweden)

    Evode Mukama

    2014-12-01

    Full Text Available This paper depicts a study carried out in Rwanda concerning university students who participated in a contest to produce short documentary films. The purpose of this research is to conceptualize these kinds of technology-based learning projects (TBLPs through a sociocultural perspective. The methodology included focus-group discussions and field notes to collect empirical data. The findings reveal that the more educational technologies capture objects of learning positioned in the students’ sociocultural proximity, the more focused the learners’ attention is on these objects. The study shows also that a change in learning projects may depend to a large extent on whether the technology relates to the students’ sociocultural proximity, that is, taking into consideration students’ physical, cultural, and contextual real world. The study recommends a community of learning/inquiry embedded in a collaborative, problem-solving dynamic involving cognitive support from peers, teachers, external specialists, and the wider community.

  12. Student Interest in Technology and Science (SITS) Survey: Development, Validation, and Use of a New Instrument

    Science.gov (United States)

    Romine, William; Sadler, Troy D.; Presley, Morgan; Klosterman, Michelle L.

    2014-01-01

    This study presents the systematic development, validation, and use of a new instrument for measuring student interest in science and technology. The Student Interest in Technology and Science (SITS) survey is composed of 5 sub-sections assessing the following dimensions: interest in learning science, using technology to learn science, science…

  13. Validation of an Instrument to Measure Students' Motivation and Self-Regulation towards Technology Learning

    Science.gov (United States)

    Liou, Pey-Yan; Kuo, Pei-Jung

    2014-01-01

    Background: Few studies have examined students' attitudinal perceptions of technology. There is no appropriate instrument to measure senior high school students' motivation and self-regulation toward technology learning among the current existing instruments in the field of technology education. Purpose: The present study is to validate an…

  14. Laboratory technology research: Abstracts of FY 1998 projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of the country: the world-class basic research capability of the DOE Office of Science (SC) national laboratories and the unparalleled entrepreneurial spirit of American industry. Projects supported by the LTR program in FY 1998 explore the applications of basic research advances relevant to DOE`s mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials, intelligent processing and manufacturing research, and environmental and biomedical research. Abstracts for 85 projects are contained in this report.

  15. Laboratory Technology Research: Abstracts of FY 1996 projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of this country: the world-class basic research capability of the DOE Energy Research (ER) multi-program national laboratories and the unparalleled entrepreneurial spirit of American industry. Projects supported by the LTR program are conducted by the five ER multi-program laboratories: Argonne, Brookhaven, Lawrence Berkeley, Oak Ridge, and Pacific Northwest National Laboratories. These projects explore the applications of basic research advances relevant to Department of Energy`s (DOE) mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials, intelligent processing/manufacturing research, and sustainable environments.

  16. Ceramic Technology Project data base: September 1992 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1993-06-01

    Data presented in this report represent an intense effort to improve processing methods, testing methods, and general mechanical properties (rupture modulus, tensile, creep, stress-rupture, dynamic and cyclic fatigue, fracture toughness) of candidate ceramics for use in advanced heat engines. This work was performed by many facilities and represents only a small part of the data generated by the Ceramic Technology Project (CTP) since 1986. Materials discussed include GTE PY6, GN-10, NT-154, NT-164, SN-260, SN-251, SN-252, AY6, silicon nitride combined with rare-earth oxides, Y-TZP, ZTA, NC-433, NT-230, Hexoloy SA, MgO-PSZ-to-MgO-PSZ joints, MgO-PSZ-to-cast iron, and a few whisker/fiber-reinforced ceramics. Information in this report was taken from the project`s semiannual and bimonthly progress reports and from final reports summarizing the results of individual studies. Test results are presented in tabular form and in graphs. All data, including test rig descriptions and material characterizations, are stored in the CTP data base and are available to all project participants on request. The objective of this report is to make available the test results from these studies but not to draw conclusions from those data.

  17. Ceramics Technology Project database: September 1991 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1992-06-01

    The piston ring-cylinder liner area of the internal combustion engine must withstand very-high-temperature gradients, highly-corrosive environments, and constant friction. Improving the efficiency in the engine requires ring and cylinder liner materials that can survive this abusive environment and lubricants that resist decomposition at elevated temperatures. Wear and friction tests have been done on many material combinations in environments similar to actual use to find the right materials for the situation. This report covers tribology information produced from 1986 through July 1991 by Battelle columbus Laboratories, Caterpillar Inc., and Cummins Engine Company, Inc. for the Ceramic Technology Project (CTP). All data in this report were taken from the project`s semiannual and bimonthly progress reports and cover base materials, coatings, and lubricants. The data, including test rig descriptions and material characterizations, are stored in the CTP database and are available to all project participants on request. Objective of this report is to make available the test results from these studies, but not to draw conclusions from these data.

  18. 78 FR 32637 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2013-05-31

    ..., Science and Technology Reinvention Laboratory Personnel Management Demonstration Project, Department of... DEPARTMENT OF DEFENSE Office of the Secretary Science and Technology Reinvention Laboratory Personnel Management Demonstration Project, Department of the Army, Army Research, Development and...

  19. Local participation in complex technological projects as bridging between different communities in Belgium

    NARCIS (Netherlands)

    Sips, K.; Craps, M.; Dewulf, A.

    2013-01-01

    Local community participation in complex technological projects, where technological innovations and risks need to be managed, is notoriously challenging. Relations with local inhabitants easily take the form of exclusion, protest, controversy or litigation. While such projects represent

  20. Projects at the Western Environmental Technology Office. Quarterly technical progress report, April 1--June 30, 1995

    International Nuclear Information System (INIS)

    1995-01-01

    This report contains brief outlines of the multiple projects under the responsibility of the Western Environmental Technology Office in Butte Montana. These projects include biomass remediation, remediation of contaminated soils, mine waste technology, and several other types of remediation

  1. 1990 DOE/SANDIA crystalline photovoltaic technology project review meeting

    Energy Technology Data Exchange (ETDEWEB)

    Ruby, D.S. (ed.)

    1990-07-01

    This document serves as the proceedings for the annual project review meeting held by Sandia's Photovoltaic Cell Research Division and Photovoltaic Technology Division. It contains information supplied by each organization making a presentation at the meeting, which was held August 7 through 9, 1990 at the Sheraton Hotel in Albuquerque, New Mexico. Sessions were held to discuss national photovoltaic programs, one-sun crystalline silicon cell research, concentrator silicon cell research, concentrator 3-5 cell research, and concentrating collector development.

  2. The Rocky Flats Environmental Technology Site beryllium characterization project

    International Nuclear Information System (INIS)

    Morrell, D.M.; Miller, J.R.; Allen, D.F.

    1999-01-01

    A site beryllium characterization project was completed at the Rocky Flats Environmental Technology Site (RFETS) in 1997. Information from historical reviews, previous sampling surveys, and a new sampling survey were used to establish a more comprehensive understanding of the locations and levels of beryllium contamination in 35 buildings. A feature of the sampling strategy was to test if process knowledge was a good predictor of where beryllium contamination could be found. Results revealed that this technique was effective at identifying where surface contamination levels might exceed the RFETS smear control level but that it was not effective in identifying where low concentrations of beryllium might be found

  3. Does assessing project work enhance the validity of qualifications? The case of GCSE coursework

    Directory of Open Access Journals (Sweden)

    Victoria Crisp

    2009-03-01

    Full Text Available This paper begins by describing current views on validity and how certain assessment forms, such as school-based project work, may enhance validity. It then touches on debates about the dependability of assessment by teachers. GCSEs and GCSE coursework are then described along with the reasons for the inclusion of coursework in many GCSEs. Crooks, Kane and Cohen’s (1996 chain model of eight linked stages of validity enquiry is then used as a structure within which to consider the validity of project work assessments, and specifically GCSE coursework assessment, drawing on the available literature. Strengths for validity include the ability to assess objectives that are difficult to test in written examinations, promoting additional skills such as critical thinking, creativity and independent thinking, and improving motivation. Possible threats to validity include the potential for internet and other types of plagiarism, tasks becoming overly structured and formulaic thus reducing the positive impact on learning, and the potentially heavy workload for teachers and students. The paper concludes by describing current policy changes in the UK with regard to GCSE coursework and relates this to strong and weak validity links for project work as a mode of assessment.

  4. NASA's Exploration Technology Development Program Energy Storage Project Battery Technology Development

    Science.gov (United States)

    Reid, Concha M.; Miller, Thomas B.; Mercer, Carolyn R.; Jankovsky, Amy L.

    2010-01-01

    Technical Interchange Meeting was held at Saft America s Research and Development facility in Cockeysville, Maryland on Sept 28th-29th, 2010. The meeting was attended by Saft, contractors who are developing battery component materials under contracts awarded through a NASA Research Announcement (NRA), and NASA. This briefing presents an overview of the components being developed by the contractor attendees for the NASA s High Energy (HE) and Ultra High Energy (UHE) cells. The transition of the advanced lithium-ion cell development project at NASA from the Exploration Technology Development Program Energy Storage Project to the Enabling Technology Development and Demonstration High Efficiency Space Power Systems Project, changes to deliverable hardware and schedule due to a reduced budget, and our roadmap to develop cells and provide periodic off-ramps for cell technology for demonstrations are discussed. This meeting gave the materials and cell developers the opportunity to discuss the intricacies of their materials and determine strategies to address any particulars of the technology.

  5. A Project in Support of Nuclear Technology Cooperation

    International Nuclear Information System (INIS)

    Ko, Young Cheol; Kim, Kyoung Pyo; Yi, Ji Ho

    2007-12-01

    The results and contents of the project are as follows; - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. - Domestic INIS project has carried out various activities on supporting a decision-making for INIS Secretariat, exchanges of the statistical information between INIS and the country, and technical assistance for domestic end-users using INIS database. - Based on the construction of INIS database sent by member states, the data published in the country has been gathered, collected, and inputted to INIS database according to the INIS reference series. - Using the INIS output data, it has provided domestic users with searching INIS CD-ROM DB and INIS online database, INIS SDI service, non-conventional literature delivery services and announce INIS to users. - Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy information and computer software developed in the advanced countries

  6. The project NIK: sustainability in information and communication technologies

    Energy Technology Data Exchange (ETDEWEB)

    Weigmann, U.; Dompke, M.; Folk, K.; Lahser, K. [German Aerospace Center (DLR), Berlin (Germany)

    2004-07-01

    Following the recommendation of the Enquete commission of the 13{sup th} German Bundestag, the German Federal Ministry of Education and Research commissioned the project management organisation of the German Aerospace Center (DLR) to develop a roadmap for sustainability in the field of information and communication technologies (ICT). The primary objective of this exercise was to increase awareness of the concept of sustainable development within the different segments of the ICT industry and to encourage the formulation and implementation of concrete agreements in both production and sales. Using the method of road mapping, the DLR initiated a wide dialogue process focussing on the topics Mobile Communication, Monitor Recycling and Display Technologies, and Public Procurement. This project has led to a number of successful results. These include changes in production processes (increase in the share of recycled glass in the production of CRTs), the introduction of new forms of organisation in the industry (closer coordination of production, sales and maintenance in order to achieve greater energy efficiency) and the development of innovative implementation strategies (integration of methods in procurement procedures; formation of strategic partnerships with agencies specialised in implementation). (orig.)

  7. A Project in Support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Young Cheol; Kim, Kyoung Pyo; Yi, Ji Ho (and others)

    2007-12-15

    The results and contents of the project are as follows; - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. - Domestic INIS project has carried out various activities on supporting a decision-making for INIS Secretariat, exchanges of the statistical information between INIS and the country, and technical assistance for domestic end-users using INIS database. - Based on the construction of INIS database sent by member states, the data published in the country has been gathered, collected, and inputted to INIS database according to the INIS reference series. - Using the INIS output data, it has provided domestic users with searching INIS CD-ROM DB and INIS online database, INIS SDI service, non-conventional literature delivery services and announce INIS to users. - Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy information and computer software developed in the advanced countries.

  8. Health Information Technology Usability Evaluation Scale (Health-ITUES) for Usability Assessment of Mobile Health Technology: Validation Study.

    Science.gov (United States)

    Schnall, Rebecca; Cho, Hwayoung; Liu, Jianfang

    2018-01-05

    Mobile technology has become a ubiquitous technology and can be particularly useful in the delivery of health interventions. This technology can allow us to deliver interventions to scale, cover broad geographic areas, and deliver technologies in highly tailored ways based on the preferences or characteristics of users. The broad use of mobile technologies supports the need for usability assessments of these tools. Although there have been a number of usability assessment instruments developed, none have been validated for use with mobile technologies. The goal of this work was to validate the Health Information Technology Usability Evaluation Scale (Health-ITUES), a customizable usability assessment instrument in a sample of community-dwelling adults who were testing the use of a new mobile health (mHealth) technology. A sample of 92 community-dwelling adults living with HIV used a new mobile app for symptom self-management and completed the Health-ITUES to assess the usability of the app. They also completed the Post-Study System Usability Questionnaire (PSSUQ), a widely used and well-validated usability assessment tool. Correlations between these scales and each of the subscales were assessed. The subscales of the Health-ITUES showed high internal consistency reliability (Cronbach alpha=.85-.92). Each of the Health-ITUES subscales and the overall scale was moderately to strongly correlated with the PSSUQ scales (r=.46-.70), demonstrating the criterion validity of the Health-ITUES. The Health-ITUES has demonstrated reliability and validity for use in assessing the usability of mHealth technologies in community-dwelling adults living with a chronic illness. ©Rebecca Schnall, Hwayoung Cho, Jianfang Liu. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 05.01.2018.

  9. Exploring the Relationship between Authentic Leadership and Project Outcomes and Job Satisfaction with Information Technology Professionals

    Science.gov (United States)

    Fischer, Mark A.

    2014-01-01

    One of the most important issues for organizations and information technology (IT) professionals is measuring the success or failure of information technology projects. How we understand the value and usefulness of IT projects is critical to how information technology executives evaluate and decide on technology investments. In a 2009 CHAOS…

  10. Overview of the Photovoltaic Manufacturing Technology (PVMaT) project

    International Nuclear Information System (INIS)

    Witt, C.E.; Mitchell, R.L.; Mooney, G.D.

    1993-08-01

    The Photovoltaic Manufacturing Technology (PVMaT) project is a historic government/industry photovoltaic (PV) manufacturing R ampersand D partnership composed of joint efforts between the federal government (through the US Department of Energy) and members of the US PV industry. The project's ultimate goal is to ensure that the US industry retains and extends its world leadership role in the manufacture and commercial development of PV components and systems. PVMaT is designed to do this by helping the US PV industry improve manufacturing processes, accelerate manufacturing cost reductions for PV modules, improve commercial product performance, and lay the groundwork for a substantial scale-up of US-based PV manufacturing capacities. Phase 1 of the project, the problem identification phase, was completed in early 1991. Phase 2, the problem solution phase, which addresses process-specific problems of specific manufacturers, is now underway with an expected duration of 5 years. Phase 3 addresses R ampersand D problems that are relatively common to a number of PV companies or the PV industry as a whole. These ''generic'' problem areas are being addressed through a teamed research approach

  11. Project inspection using mobile technology - phase I : an investigation into existing business processes and areas for improvement using mobile technology.

    Science.gov (United States)

    2013-08-01

    As mobile technology becomes widely available and affordable, transportation agencies can use this technology to : streamline operations involved within project inspection. This research, conducted in two phases, identified : opportunities for proces...

  12. Army Synthetic Validity Project. Report of Phase 3 Results. Volume 1.

    Science.gov (United States)

    1991-02-01

    Joyce Shields, and Robert Guion . EDGAR M. JOHN ON Technical Director v ARMY SYNTHETIC VALIDITY PROJECT: REPORT OF PHASE III RESULTS Volume 1 EXECUTIVE...34 Guion (1976) provides a review of several approaches to conducting synthetic validation. The approach most relevant to the problem at hand involves...included: 12B (Combat Engineer), 13B (Cannon Crewman), 27E (TOW/Dragon Repairer), 29E ( Radio Repairer), 31C (Single Channel Radio Operator), 51B (Carpentry

  13. Using Information and Communication Technologies in Hospital Classrooms: SAVEH Project

    Directory of Open Access Journals (Sweden)

    Dolores Meneses

    2011-03-01

    Full Text Available Children suffering a serious illness, experience enormous changes in their daily lives. Not only does the direct consequences of the disease affect the child, but also the fact of being at a hospital, or at home and not being allowed to go to school. Frequently, connections with classmates, neighbors, and sometimes even some with his relatives are lost. Furthermore, the responsibility of the state, to continue his schooling process is much harder, since different communities (family, school teachers, hospital teachers, medical doctors, psychologists… have to be coordinated. Last but not least, entertainment and enjoyment should be provided to avoid boredom and to improve their affective state. At the same time, with the development of Information and Communication Technologies, a large number of solutions have arisen that allow people to enhance their communication, education and entertainment possibilities. These technologies seem perfectly suitable to be used to tackle the problems described above. In this article, some of the special necessities of children suffering from a serious illness are pointed out, technologies available to be facilitated are described and some initiatives taking place in Spain mentioned. The SAVEH project will be described in detail.

  14. Electrically Driven Thermal Management: Flight Validation, Experiment Development, Future Technologies

    Science.gov (United States)

    Didion, Jeffrey R.

    2018-01-01

    Electrically Driven Thermal Management is an active research and technology development initiative incorporating ISS technology flight demonstrations (STP-H5), development of Microgravity Science Glovebox (MSG) flight experiment, and laboratory-based investigations of electrically based thermal management techniques. The program targets integrated thermal management for future generations of RF electronics and power electronic devices. This presentation reviews four program elements: i.) results from the Electrohydrodynamic (EHD) Long Term Flight Demonstration launched in February 2017 ii.) development of the Electrically Driven Liquid Film Boiling Experiment iii.) two University based research efforts iv.) development of Oscillating Heat Pipe evaluation at Goddard Space Flight Center.

  15. NRC reactor operator and senior operator licensing examination development and validation project

    International Nuclear Information System (INIS)

    Spilberg, S.W.

    1983-01-01

    The NRC operator licensing examination project focuses on developing a system to ensure the content validity of the examination and examination process. Increased reliability and validity will be gained through examiner training, standards and guidelines, and the use of common information bases. The optimal use of each examination component (oral, written, simulator) is also addressed. The importance of utility input and feedback throughout the project is stressed. Only through mutual use, by both utility and operator licensing staff, of the same carefully derived performance standards, knowledge and skill requirements will the congruence in our goals be reflected in our approach towards operator training and licensing

  16. The Sandia MEMS Passive Shock Sensor : FY08 testing for functionality, model validation, and technology readiness.

    Energy Technology Data Exchange (ETDEWEB)

    Walraven, Jeremy Allen; Blecke, Jill; Baker, Michael Sean; Clemens, Rebecca C.; Mitchell, John Anthony; Brake, Matthew Robert; Epp, David S.; Wittwer, Jonathan W.

    2008-10-01

    This report summarizes the functional, model validation, and technology readiness testing of the Sandia MEMS Passive Shock Sensor in FY08. Functional testing of a large number of revision 4 parts showed robust and consistent performance. Model validation testing helped tune the models to match data well and identified several areas for future investigation related to high frequency sensitivity and thermal effects. Finally, technology readiness testing demonstrated the integrated elements of the sensor under realistic environments.

  17. Flexible Electrostatic Technology for Capture and Handling Project

    Science.gov (United States)

    Keys, Andrew; Bryan, Tom; Horwitz, Chris; Rakoczy, John; Waggoner, Jason

    2015-01-01

    previous MSFC and NASA proposals or concepts can now be realized or simplified by the development of the this initial and future FETCH grippers including commercial resupply, Exploration vehicle assembly, Satellite servicing, and orbital debris removal since a major part of these missions is to align to and capture some handle. Completed Project (2013 - 2014) Flexible Electrostatic Technology for Capture & Handling Project Center Innovation Fund: MSFC CIF Program | Space Technology Mission Directorate (STMD) For more information visit techport.nasa.gov Some NASA technology projects are smaller (for example SBIR/STTR, NIAC and Center Innovation Fund), and will have less content than other, larger projects. Newly created projects may not sensors or injection of permanent adhesives. With gripping forces estimated between 0.5 and 2.5 pounds per square inch or 70-300 lb./sq. ft. of surface contact, the FETCH can turn-on and turn-off rapidly and repeatedly to enable sample handling, soft docking, in-space assembly, and precision relocation for accurate anchor adhesion.

  18. Rationale and methods of the European Food Consumption Validation (EFCOVAL) Project

    DEFF Research Database (Denmark)

    de Boer, E. J.; Slimani, N.; van 't Veer, P.

    2011-01-01

    the EPIC-Soft databases were adapted. Finally, the EFCOVAL Consortium developed a statistical tool (Multiple Source Method) for estimating the usual intake and distribution, which has been tested using real food consumption data and compared with three other statistical methods through a simulation study......Background/Objectives: The overall objective of the European Food Consumption Validation (EFCOVAL) Project was to further develop and validate a trans-European food consumption method to be used for the evaluation of the intake of foods, nutrients and potentially hazardous chemicals within...... the European population. Subjects/Methods: The EFCOVAL Project was carried out by 13 institutes from 11 European countries. The main activities were centered on the three main objectives of the project organized in different sub-projects. Results: In EFCOVAL, EPIC-Soft (the software developed to conduct 24-h...

  19. Gas Dynamic Spray Technology Demonstration Project Management. Joint Test Report

    Science.gov (United States)

    Lewis, Pattie

    2011-01-01

    The standard practice for protecting metallic substrates in atmospheric environments is the use of an applied coating system. Current coating systems used across AFSPC and NASA contain volatile organic compounds (VOCs) and hazardous air pollutants (HAPs). These coatings are sUbject to environmental regulations at the Federal and State levels that limit their usage. In addition, these coatings often cannot withstand the high temperatures and exhaust that may be experienced by Air Force Space Command (AFSPC) and NASA structures. In response to these concerns, AFSPC and NASA have approved the use of thermal spray coatings (TSCs). Thermal spray coatings are extremely durable and environmentally friendly coating alternatives, but utilize large cumbersome equipment for application that make the coatings difficult and time consuming to repair. Other concerns include difficulties coating complex geometries and the cost of equipment, training, and materials. Gas Dynamic Spray (GOS) technology (also known as Cold Spray) was evaluated as a smaller, more maneuverable repair method as well as for areas where thermal spray techniques are not as effective. The technology can result in reduced maintenance and thus reduced hazardous materials/wastes associated with current processes. Thermal spray and GOS coatings also have no VOCs and are environmentally preferable coatings. The primary objective of this effort was to demonstrate GDS technology as a repair method for TSCs. The aim was that successful completion of this project would result in approval of GDS technology as a repair method for TSCs at AFSPC and NASA installations to improve corrosion protection at critical systems, facilitate easier maintenance activity, extend maintenance cycles, eliminate flight hardware contamination, and reduce the amount of hazardous waste generated.

  20. FY2017 Pilot Project Plan for the Nuclear Energy Knowledge and Validation Center Initiative

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Weiju [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-10-30

    To prepare for technical development of computational code validation under the Nuclear Energy Knowledge and Validation Center (NEKVAC) initiative, several meetings were held by a group of experts of the Idaho National Laboratory (INL) and the Oak Ridge National Laboratory (ORNL) to develop requirements of, and formulate a structure for, a transient fuel database through leveraging existing resources. It was concluded in discussions of these meetings that a pilot project is needed to address the most fundamental issues that can generate immediate stimulus to near-future validation developments as well as long-lasting benefits to NEKVAC operation. The present project is proposed based on the consensus of these discussions. Analysis of common scenarios in code validation indicates that the incapability of acquiring satisfactory validation data is often a showstopper that must first be tackled before any confident validation developments can be carried out. Validation data are usually found scattered in different places most likely with interrelationships among the data not well documented, incomplete with information for some parameters missing, nonexistent, or unrealistic to experimentally generate. Furthermore, with very different technical backgrounds, the modeler, the experimentalist, and the knowledgebase developer that must be involved in validation data development often cannot communicate effectively without a data package template that is representative of the data structure for the information domain of interest to the desired code validation. This pilot project is proposed to use the legendary TREAT Experiments Database to provide core elements for creating an ideal validation data package. Data gaps and missing data interrelationships will be identified from these core elements. All the identified missing elements will then be filled in with experimental data if available from other existing sources or with dummy data if nonexistent. The resulting hybrid

  1. FY2017 Pilot Project Plan for the Nuclear Energy Knowledge and Validation Center Initiative

    International Nuclear Information System (INIS)

    Ren, Weiju

    2016-01-01

    To prepare for technical development of computational code validation under the Nuclear Energy Knowledge and Validation Center (NEKVAC) initiative, several meetings were held by a group of experts of the Idaho National Laboratory (INL) and the Oak Ridge National Laboratory (ORNL) to develop requirements of, and formulate a structure for, a transient fuel database through leveraging existing resources. It was concluded in discussions of these meetings that a pilot project is needed to address the most fundamental issues that can generate immediate stimulus to near-future validation developments as well as long-lasting benefits to NEKVAC operation. The present project is proposed based on the consensus of these discussions. Analysis of common scenarios in code validation indicates that the incapability of acquiring satisfactory validation data is often a showstopper that must first be tackled before any confident validation developments can be carried out. Validation data are usually found scattered in different places most likely with interrelationships among the data not well documented, incomplete with information for some parameters missing, nonexistent, or unrealistic to experimentally generate. Furthermore, with very different technical backgrounds, the modeler, the experimentalist, and the knowledgebase developer that must be involved in validation data development often cannot communicate effectively without a data package template that is representative of the data structure for the information domain of interest to the desired code validation. This pilot project is proposed to use the legendary TREAT Experiments Database to provide core elements for creating an ideal validation data package. Data gaps and missing data interrelationships will be identified from these core elements. All the identified missing elements will then be filled in with experimental data if available from other existing sources or with dummy data if nonexistent. The resulting hybrid

  2. Soft city culture and technology the Betaville Project

    CERN Document Server

    Skelton, Carl

    2014-01-01

    Soft City Culture and Technology: The Betaville Project discusses the complete cycle of conception, development, and deployment of the Betaville platform. Betaville is a massively participatory online environment for distributed 3D design and development of proposals for changes to the built environment– an experimental integration of art, design, and software development for the public realm. Through a detailed account of Betaville from a Big Crazy Idea to a working "deep social medium", the author examines the current conditions of performance and accessibility of hardware, software, networks, and skills that can be brought together into a new form of open public design and deliberation space, for and spanning and integrating the disparate spheres of art, architecture, social media, and engineering. Betaville is an ambitious enterprise, of building compelling and constructive working relationships in situations where roles and disciplinary boundaries must be as agile as the development process of the soft...

  3. Advanced Mirror Technology Development (AMTD) Project: 3.0 Year Status

    Science.gov (United States)

    Stahl, H. Philip

    2015-01-01

    Advanced Mirror Technology Development (AMTD) is a funded NASA Strategic Astrophysics Technology project. Begun in 2011, we are in Phase 2 of a multi-year effort. Our objective is to mature towards TRL6 critical technologies needed to produce 4-m or larger flight-qualified UVOIR mirrors by 2018 so that a viable astronomy mission can be considered by the 2020 Decadal Review. The developed technology must enable missions capable of both general astrophysics and ultra-high contrast observations of exoplanets. Just as JWST's architecture was driven by launch vehicle, a future UVOIR mission's architecture (monolithic, segmented or interferometric) will depend on capacities of future launch vehicles (and budget). Since we cannot predict the future, we must prepare for all potential futures. Therefore, we are pursuing multiple technology paths. AMTD uses a science-driven systems engineering approach. We mature technologies required to enable the highest priority science AND result in a high-performance low-cost low-risk system. One of our key accomplishments is that we have derived engineering specifications for advanced normal-incidence monolithic and segmented mirror systems needed to enable both general astrophysics and ultra-high contrast observations of exoplanets missions as a function of potential launch vehicle and its inherent mass and volume constraints. Another key accomplishment is that we have matured our technology by building and testing hardware. To demonstrate stacked core technology, we built a 400 mm thick mirror. Currently, to demonstrate lateral scalability, we are manufacturing a 1.5 meter mirror. To assist in architecture trade studies, the Engineering team develops Structural, Thermal and Optical Performance (STOP) models of candidate mirror assembly systems including substrates, structures, and mechanisms. These models are validated by test of full- and subscale components in relevant thermo-vacuum environments. Specific analyses include: maximum

  4. The Role of Research in School Project Work and Teacher Development: Results from Project "Schools Ethics Technology."

    Science.gov (United States)

    Wellensiek, Anneliese; Lembens, Anja; Schallies, Michael

    "Schools Ethics Technology" was a German interdisciplinary research project with the Centre of Ethics in the Sciences at the University of Tubingen. The project highlighted the new topic of biotechnology and genetic engineering, involving the formation of active project groups within schools. This study examined teaching activities…

  5. Evaluation of Representative Smart Grid Investment Grant Project Technologies: Thermal Energy Storage

    Energy Technology Data Exchange (ETDEWEB)

    Tuffner, Francis K.; Bonebrake, Christopher A.

    2012-02-14

    This document is one of a series of reports estimating the benefits of deploying technologies similar to those implemented on the Smart Grid Investment Grant (SGIG) projects. Four technical reports cover the various types of technologies deployed in the SGIG projects, distribution automation, demand response, energy storage, and renewables integration. A fifth report in the series examines the benefits of deploying these technologies on a national level. This technical report examines the impacts of energy storage technologies deployed in the SGIG projects.

  6. ARM Radiosondes for National Polar-Orbiting Operational Environmental Satellite System Preparatory Project Validation Field Campaign Report

    Energy Technology Data Exchange (ETDEWEB)

    Borg, Lori [Univ. of Wisconsin, Madison, WI (United States); Tobin, David [Univ. of Wisconsin, Madison, WI (United States); Reale, Anthony [National Oceanic and Atmospheric Administration (NOAA), Washington, DC (United States); Knuteson, Robert [Univ. of Wisconsin, Madison, WI (United States); Feltz, Michelle [Univ. of Wisconsin, Madison, WI (United States); Liu, Mark [National Oceanic and Atmospheric Administration (NOAA), Washington, DC (United States); Holdridge, Donna J [Argonne National Lab. (ANL), Argonne, IL (United States); Mather, James [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-06-01

    This IOP has been a coordinated effort involving the U.S. Department of Energy (DOE) Atmospheric Radiation (ARM) Climate Research Facility, the University of Wisconsin (UW)-Madison, and the JPSS project to validate SNPP NOAA Unique Combined Atmospheric Processing System (NUCAPS) temperature and moisture sounding products from the Cross-track Infrared Sounder (CrIS) and the Advanced Technology Microwave Sounder (ATMS). In this arrangement, funding for radiosondes was provided by the JPSS project to ARM. These radiosondes were launched coincident with the SNPP satellite overpasses (OP) at four of the ARM field sites beginning in July 2012 and running through September 2017. Combined with other ARM data, an assessment of the radiosonde data quality was performed and post-processing corrections applied producing an ARM site Best Estimate (BE) product. The SNPP targeted radiosondes were integrated into the NOAA Products Validation System (NPROVS+) system, which collocated the radiosondes with satellite products (NOAA, National Aeronautics and Space Administration [NASA], European Organisation for the Exploitation of Meteorological Satellites [EUMETSAT], Geostationary Operational Environmental Satellite [GOES], Constellation Observing System for Meteorology, Ionosphere, and Climate [COSMIC]) and Numerical Weather Prediction (NWP forecasts for use in product assessment and algorithm development. This work was a fundamental, integral, and cost-effective part of the SNPP validation effort and provided critical accuracy assessments of the SNPP temperature and water vapor soundings.

  7. The NutriChip project--translating technology into nutritional knowledge.

    Science.gov (United States)

    Vergères, Guy; Bogicevic, Biljana; Buri, Caroline; Carrara, Sandro; Chollet, Magali; Corbino-Giunta, Linda; Egger, Lotti; Gille, Doreen; Kopf-Bolanz, Katrin; Laederach, Kurt; Portmann, Reto; Ramadan, Qasem; Ramsden, Jeremy; Schwander, Flurina; Silacci, Paolo; Walther, Barbara; Gijs, Martin

    2012-09-01

    Advances in food transformation have dramatically increased the diversity of products on the market and, consequently, exposed consumers to a complex spectrum of bioactive nutrients whose potential risks and benefits have mostly not been confidently demonstrated. Therefore, tools are needed to efficiently screen products for selected physiological properties before they enter the market. NutriChip is an interdisciplinary modular project funded by the Swiss programme Nano-Tera, which groups scientists from several areas of research with the aim of developing analytical strategies that will enable functional screening of foods. The project focuses on postprandial inflammatory stress, which potentially contributes to the development of chronic inflammatory diseases. The first module of the NutriChip project is composed of three in vitro biochemical steps that mimic the digestion process, intestinal absorption, and subsequent modulation of immune cells by the bioavailable nutrients. The second module is a miniaturised form of the first module (gut-on-a-chip) that integrates a microfluidic-based cell co-culture system and super-resolution imaging technologies to provide a physiologically relevant fluid flow environment and allows sensitive real-time analysis of the products screened in vitro. The third module aims at validating the in vitro screening model by assessing the nutritional properties of selected food products in humans. Because of the immunomodulatory properties of milk as well as its amenability to technological transformation, dairy products have been selected as model foods. The NutriChip project reflects the opening of food and nutrition sciences to state-of-the-art technologies, a key step in the translation of transdisciplinary knowledge into nutritional advice.

  8. Grandma's Games Project: Bridging Tradition and Technology Mediated Education

    Directory of Open Access Journals (Sweden)

    Marina Vasileva

    2014-02-01

    Full Text Available This article presents a project entitled "Grandma’s games", following a research idea to enrich the educational process of K9 students by introducing the traditional children games of our ancestors in the learning environment, revived and adapted for modern students with the aid of information and communication technology. While creating a strong connection between our heritage and the modern educational trends, the project’s intention goes beyond mere fulfilment of educational goals, striving to increase the interest and motivation of primary education students to develop their creativity and originality while learning, with respect of their own personal preferences and cultural heritage. The "Grandma’s games" research project engaged twelve traditional games in the educational activities at primary schools from both rural and non-rural environments in Republic of Macedonia. Descriptive statistics was applied on the data set sampled from the extensive survey conducted among teachers in these schools, to illustrate the benefits from the application of the Grandma’s games in educational process.

  9. A Project in Support of Nuclear Technology Cooperation

    International Nuclear Information System (INIS)

    Lee, Kyu Jung; Choi, Pyong Hoon; Yi, Ji Ho and others

    2004-12-01

    The result and contents of the project are as follows; - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. - Domestic INIS project has carried out various activities on supporting a decision-making for INIS Secretariat, exchanges of the statistical information between INIS and the country, and technical assistance for domestic end-users using INIS database. - Based on the construction of INIS database sent by member states, the data published in the country has been gathered, collected, and inputted to INIS database according to the INIS reference series. - Using the INIS output data, it has provided domestic users with searching INIS CD-Rom DB and INIS online database, INIS SDI service, non-conventional literature delivery services and announce INIS to users. - Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Effective management of computer codes for nuclear application and establishment of information exchange mechanism for rapid technical support. - acquisition of nuclear computer codes from NEA Data Bank an registration of new software developed by domestic organization

  10. ECUT (Energy Conversion and Utilization Technologies Program). Biocatalysis Project

    Science.gov (United States)

    1986-01-01

    Presented are the FY 1985 accomplishments, activities, and planned research efforts of the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Program. The Project's technical activities were organized as follows: In the Molecular Modeling and Applied Genetics work element, research focused on (1) modeling and simulation studies to establish the physiological basis of high temperature tolerance in a selected enzyme and the catalytic mechanisms of three species of another enzyme, and (2) determining the degree of plasmid amplification and stability of several DNA bacterial strains. In the Bioprocess Engineering work element, research focused on (1) studies of plasmid propagation and the generation of models, (2) developing methods for preparing immobilized biocatalyst beads, and (3) developing an enzyme encapsulation method. In the Process Design and Analysis work element, research focused on (1) further refinement of a test case simulation of the economics and energy efficiency of alternative biocatalyzed production processes, (2) developing a candidate bioprocess to determine the potential for reduced energy consumption and facility/operating costs, and (3) a techno-economic assessment of potential advancements in microbial ammonia production.

  11. CryoSat Land Ice Product Validation within the CryoVal-LI project

    DEFF Research Database (Denmark)

    Sørensen, Louise Sandberg; Baker, Steven; Csatho, Bea

    The main objective of the ESA funded CryoVal-LI project has been to identify and quantify the error sources for the CryoSat-2 mission over land ice. This has been undertaken through the careful documentation of the possible error sources, the identification of suitable validation sites and the cr...

  12. Review of PV Inverter Technology Cost and Performance Projections

    Energy Technology Data Exchange (ETDEWEB)

    Navigant Consulting Inc.

    2006-01-01

    The National Renewable Energy Laboratory (NREL) has a major responsibility in the implementation of the U.S. Department of Energy's (DOE's) Solar Energy Technologies Program. Sandia National Laboratories (SNL) has a major role in supporting inverter development, characterization, standards, certifications, and verifications. The Solar Energy Technologies Program recently published a Multiyear Technical Plan, which establishes a goal of reducing the Levelized Energy Cost (LEC) for photovoltaic (PV) systems to $0.06/kWh by 2020. The Multiyear Technical Plan estimates that, in order to meet the PV system goal, PV inverter prices will need to decline to $0.25-0.30 Wp by 2020. DOE determined the need to conduct a rigorous review of the PV Program's technical and economic targets, including the target set for PV inverters. NREL requested that Navigant Consulting Inc.(NCI) conduct a review of historical and projected cost and performance improvements for PV inverters, including identification of critical barriers identified and the approaches government might use to address them.

  13. Study and Proposal of the Nuclear Power Plant Technology for the Ninh Thuan 2 Project

    International Nuclear Information System (INIS)

    Tran Chi Thanh; Le Van Hong; Hoang Sy Than; Nguyen Van De; Mai Dinh Trung; Nguyen Nhi Dien; Nguyen Minh Tuan; Pham Van Lam; Phan Ngoc Tuyen; Do Chi Dung; Hoang Minh Giang; Le Dai Dien

    2015-01-01

    The Ninh Thuan 1&2 Nuclear Power Plant Projects were approved on November 25th, 2009. At present, the task of NPP technology selection of these projects is an important and complex task. This report will show the acceptable method to create a set of criterion for selecting technology for Ninh Thuan 2 NPP project. The result of evaluation of three NPP technologies, such as ATMEA1, AP1000 and MPWR+ introduced in the Feasibility Study Reports of this project, will be discussed. In conclusion, the AP1000 technology is the first candidate for the Ninh Thuan 2 NPP Project. (author)

  14. Correlational Study of Risk Management and Information Technology Project Success

    Science.gov (United States)

    Gillespie, Seth J.

    2014-01-01

    Many IT projects fail despite the best efforts to keep these projects within budget, schedule, and scope. Few studies have looked at the effect of project risk management tools and techniques on project success. The primary focus of this study was to examine the extent to which utilization of project risk management processes influence project…

  15. Validation Study on the MCC-based Technology

    International Nuclear Information System (INIS)

    Park, Sungkeun; Lee, Dowhan; Kang, Shincheul; Choi, Hyunwoo; Chai, Jangbom

    2006-01-01

    KEPRI and M and D Corporation has developed a methodology, called the NEST I (Non-intrusive Evaluation of Stem Thrust), for determining the stem thrust for a Motor Operated Valve (MOV) based on the motor torque and the stem displacement. The motor torque is determined using another method called NEET (Non-intrusive Evaluation of Electric Torque) which uses the voltage and current data from three phases to obtain the motor torque. The stem displacement is obtained from the voltage and current data along with the nameplate information of the motor, actuator and stem. The motor data (voltage, current and coil current) are measured using MOVIDS (Motor Operated Valve Intelligent Diagnostic System). The motor torque is determined using a NEET algorithm and the stem thrust is calculated using the NEST I method. The goal of this testing was to obtain data from operation of a MOV and to compare the actual measured thrust with the thrust calculated using the NEET / NEST I methods and therefore validate the NEET / NEST I methods

  16. An Engineering Method of Civil Jet Requirements Validation Based on Requirements Project Principle

    Science.gov (United States)

    Wang, Yue; Gao, Dan; Mao, Xuming

    2018-03-01

    A method of requirements validation is developed and defined to meet the needs of civil jet requirements validation in product development. Based on requirements project principle, this method will not affect the conventional design elements, and can effectively connect the requirements with design. It realizes the modern civil jet development concept, which is “requirement is the origin, design is the basis”. So far, the method has been successfully applied in civil jet aircraft development in China. Taking takeoff field length as an example, the validation process and the validation method of the requirements are detailed introduced in the study, with the hope of providing the experiences to other civil jet product design.

  17. Factors that Impact Software Project Success in Offshore Information Technology (IT) Companies

    Science.gov (United States)

    Edara, Venkatarao

    2011-01-01

    Information technology (IT) projects are unsuccessful at a rate of 65% to 75% per year, in spite of employing the latest technologies and training employees. Although many studies have been conducted on project successes in U.S. companies, there is a lack of research studying the impact of various factors on software project success in offshore IT…

  18. The Learning Process and Technological Change in Wind Power: Evidence from China's CDM Wind Projects

    Science.gov (United States)

    Tang, Tian; Popp, David

    2016-01-01

    The Clean Development Mechanism (CDM) is a project-based carbon trade mechanism that subsidizes the users of climate-friendly technologies and encourages technology transfer. The CDM has provided financial support for a large share of Chinese wind projects since 2002. Using pooled cross-sectional data of 486 registered CDM wind projects in China…

  19. Why New Business Development Projects Fail: Coping with the Differences of Technological versus Market Knowledge

    NARCIS (Netherlands)

    J.H. Burgers (Henri); F.A.J. van den Bosch (Frans); H.W. Volberda (Henk)

    2007-01-01

    textabstractManaging through projects has become important for generating new knowledge to cope with technological and market discontinuities. This paper examines how the fit between the creation of technological and market knowledge and important project management characteristics, i.e. project

  20. Automated Demand Response Technology Demonstration Project for Small and Medium Commercial Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Page, Janie; Kiliccote, Sila; Dudley, Junqiao Han; Piette, Mary Ann; Chiu, Albert K.; Kellow, Bashar; Koch, Ed; Lipkin, Paul

    2011-07-01

    Small and medium commercial customers in California make up about 20-25% of electric peak load in California. With the roll out of smart meters to this customer group, which enable granular measurement of electricity consumption, the investor-owned utilities will offer dynamic prices as default tariffs by the end of 2011. Pacific Gas and Electric Company, which successfully deployed Automated Demand Response (AutoDR) Programs to its large commercial and industrial customers, started investigating the same infrastructures application to the small and medium commercial customers. This project aims to identify available technologies suitable for automating demand response for small-medium commercial buildings; to validate the extent to which that technology does what it claims to be able to do; and determine the extent to which customers find the technology useful for DR purpose. Ten sites, enabled by eight vendors, participated in at least four test AutoDR events per site in the summer of 2010. The results showed that while existing technology can reliably receive OpenADR signals and translate them into pre-programmed response strategies, it is likely that better levels of load sheds could be obtained than what is reported here if better understanding of the building systems were developed and the DR response strategies had been carefully designed and optimized for each site.

  1. Laser technology to manage periodontal disease: a valid concept?

    Science.gov (United States)

    Low, Samuel B; Mott, Angie

    2014-06-01

    Present day dental lasers can create oral environments conducive for periodontal repair. With the bacterial etiology of periodontitis and the resulting host inflammatory reaction, clinicians continue to search for therapeutic modalities to assist in the non-surgical management of periodontal disease. Traditional chairside therapies consist of mechanical debridement with manual and/or ultrasonic instrumentation with the objective of removing calculus, biofilm, and endotoxin from tooth root surfaces. Decreasing the microbial stimuli and associated end products decreases the inflammatory reaction and allows the host an opportunity to regenerate tissue through wound healing. The purpose of this article is to examine whether dental lasers, which have been in use for the past 3 decades, may augment traditional non-surgical periodontal therapy. Review of research publications related to lasers and non-surgical periodontics with attention focused on systematic studies. Studies utilizing laser technology may demonstrate positive effects on 1) selectively decreasing the biofilm environment, 2) removing calculus deposits and neutralizing endotoxin, 3) removing sulcular epithelium to assist in reattachment and decreased pocket depth, and 4) biostimulation for enhanced wound healing. Comparisons of studies to determine the difference between lasers and their respective effects on the periodontium are difficult to assess due to a wide variation of laser protocols. Copyright © 2014 Elsevier Inc. All rights reserved.

  2. Signal validation of SPDS variables for Westinghouse and Combustion Engineering plants - an EPRI project

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    Signal validation in the context of this project is the process of combining information from multiple plant sensors to produce highly reliable information about plant conditions. High information reliability is achieved by the use of redundant sources of information and by the inherent detection, identification, and isolation of faulty signals. The signal validation methodology that has been developed in previous EPRI-sponsored projects has been enhanced and applied toward validation of critical safety-related SPDS signals in the Northeast Utilities Millstone 3 Westinghouse PWR plant and the Millstone 2 Combustion Engineering PWR plant. The designs were implemented in FORTRAN software and tested off-line using recorded plant sensor data, RETRAN-generated simulation data, and data to exercise software logic branches and the integration of software modules. Designs and software modules have been developed for 15 variables to support six PWR SPDS critical safety functions as required by a utility advisory group attached to the project. The signal validation process automates a task currently performed by plant operators and does so with consistent, verified logic regardless of operator stress and training level. The methodology uses a simple structure of generic software blocks, a modular implementation, and it performs effectively within the processor and memory constraints of modern plant process computers. The ability to detect and isolate sensor failures with greater sensitivity, robustness, and coverage of common-cause failures should ultimately lead to improved plant availability, efficiency, and productivity

  3. Participatory Methods and UCA Project: understanding technologies as culture

    Directory of Open Access Journals (Sweden)

    Magda Pischetola

    2015-12-01

    Full Text Available Abstract In the complex and changing context of digital culture, the media become an important space of relation, as they have the crucial role of articulating new cultural logics that lead to disruptions in the school environment. To understand this change, new methods of analysis and research have been created, the so-called Participatory Methodologies. They are action research strategies aimed at intervening in a given social situation. In the analysis proposed here, such methodologies will help us to address the challenge of involving digital technologies in school culture, through the participation of different individuals involved. Two qualitative case studies about the project Um Computador por Aluno – the Brazilian One Laptop per Child -, carried out in 2012 in the schools of Santa Catarina and Bahia, are the first of two phases of the research presented. The results concern a "vertical" form of technology insertion in schools, which led to frustration and de-motivation at several levels. Starting from these considerations, the second stage of research proposes a pedagogical intervention in one of four schools in the field. The methodologies of participatory video and photography are chosen as possibilities of action-reflection-action on the sociocultural reality of students through the experience of sharing. The results show the importance of carrying out creative activities, appropriate to a social conception of learning, as well as the centrality of children and youth as agency and a broader need to redefine the relationship between teacher and student, in a more "horizontal" perspective process of teaching and learning. Keywords: Projeto UCA. Participatory Research Method. Innovative teaching-learning.

  4. Validation of an instrument to measure students' motivation and self-regulation towards technology learning

    Science.gov (United States)

    Liou, Pey-Yan; Kuo, Pei-Jung

    2014-05-01

    Background:Few studies have examined students' attitudinal perceptions of technology. There is no appropriate instrument to measure senior high school students' motivation and self-regulation toward technology learning among the current existing instruments in the field of technology education. Purpose:The present study is to validate an instrument for assessing senior high school students' motivation and self-regulation towards technology learning. Sample:A total of 1822 Taiwanese senior high school students (1020 males and 802 females) responded to the newly developed instrument. Design and method:The Motivation and Self-regulation towards Technology Learning (MSRTL) instrument was developed based on the previous instruments measuring students' motivation and self-regulation towards science learning. Exploratory and confirmatory factor analyses were utilized to investigate the structure of the items. Cronbach's alpha was applied for measuring the internal consistency of each scale. Furthermore, multivariate analysis of variance was used to examine gender differences. Results:Seven scales, including 'Technology learning self-efficacy,' 'Technology learning value,' 'Technology active learning strategies,' 'Technology learning environment stimulation,' 'Technology learning goal-orientation,' 'Technology learning self-regulation-triggering,' and 'Technology learning self-regulation-implementing' were confirmed for the MSRTL instrument. Moreover, the results also showed that male and female students did not present the same degree of preference in all of the scales. Conclusions:The MSRTL instrument composed of seven scales corresponding to 39 items was shown to be valid based on validity and reliability analyses. While male students tended to express more positive and active performance in the motivation scales, no gender differences were found in the self-regulation scales.

  5. Ceramic Technology Project. Semiannual progress report for April 1993 through September 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The Ceramic Technology Project was originally developed by the Department of Energy`s Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS`s Materials Development Program, was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. During the course of the Ceramic Technology Project, remarkable progress has been made in the development of reliable structural ceramics. However, further work is needed to reduce the cost of ceramics to facilitate their commercial introduction, especially in the highly cost-sensitive automotive market. The work described in this report is organized according to the following WBS project elements: Project Management and Coordination; Materials and Processing; Materials Design Methodology; Data Base and Life Prediction; and Technology Transfer. This report includes contributions from all currently active project participants. Separate abstracts were prepared for the 47 projects reported here.

  6. The Learning Process and Technological Change in Wind Power: Evidence from China's CDM Wind Projects

    OpenAIRE

    Tian Tang; David Popp

    2014-01-01

    The Clean Development Mechanism (CDM) is a project-based carbon trade mechanism that subsidizes the users of climate-friendly technologies and encourages technology transfer. The CDM has provided financial support for a large share of Chinese wind projects since 2002. Using pooled cross-sectional data of 486 registered CDM wind projects in China from 2002 to 2009, we examine the determinants of technological change in wind power from a learning perspective. We estimate the effects of differen...

  7. Advanced handling technology project and implications for cask design

    International Nuclear Information System (INIS)

    Griesmeyer, J.M.; Bennett, P.C.; Sanders, T.L.

    1989-01-01

    This paper describes the results of the ongoing Advanced Handling Technologies Project (AHTP) at Sandia. AHTP was initiated in 1986 to explore the use of advanced robotic systems to perform cask handling operations at radioactive waste handling facilities and to provide guidance to cask designers regarding the impact of robotic handling on cask design. The proof of concept systems developed in AHTP are intended to extrapolate from currently available commercial systems to those that would be available by the time than an actual repository would be open for operation. These systems provide test facilities for the investigation of the robotic handling of alternate cask design features. The following sections describe (1) the approach used in AHTP to select operations for proof of concept robotic systems and to identify the cask design implications, (2) the separate proof of concept robotic systems developed in AHTP, and (3) preliminary insights into the impact of cask system design features on the feasibility of robotic performance of cask handling operations. The main conclusions from AHTP to date regarding design for remote handling are: (1) incorporation of cask system design features which facilitate robotic cask handling can be achieved with minimal impact on cask functional features, (2) proper cask design allows robotic cask handling operations from manipulation of cask tie-down mechanisms to radiation surveys to be performed quickly and reliably without direct human intervention, and (3) design for remote handling also facilitates manual handling operations

  8. A project in support of nuclear technology cooperation

    International Nuclear Information System (INIS)

    Jung, Ki Jung; Choi, Pyong Hoon; Lee, Ji Ho

    2003-12-01

    Establish strategies of international cooperation in an effort to promote our nation's leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. Domestic INIS project has carried out various activities on supporting a decision-making for INIS Secretariat, exchanges of the statistical information between INIS and the country, and technical assistance for domestic end-users using INIS database. Based on the construction of INIS database sent by memeber states, the data published in the country has been gathered, collected, and inputted to INIS database according to the INIS reference series. Using the INIS output data, it has provided domestic users with searching INIS CD-ROM DB and INIS online database, INIS SDI service, non-conventional literature delivery services and announce INIS to users. Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing

  9. 78 FR 64204 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2013-10-28

    ... DEPARTMENT OF DEFENSE Office of the Secretary Science and Technology Reinvention Laboratory Personnel Management Demonstration Project, Department of Navy, Office of Naval Research (ONR); Amendment... ONR Personnel Management Demonstration Project (75 FR 77380-77447, December 10, 2010). SUMMARY: On...

  10. Application of project management in technology improvement of Qinshan III

    International Nuclear Information System (INIS)

    Liu Xiaonian

    2008-01-01

    During the operation of Qinshan III, many engineering modifications and renovation projects are being carried out. Advanced international project management methodologies accustomed to the policy and organizational characteristics of TQNPC were applied to the management of these projects. After practical application and development of these methodologies, the company finally sets up its own classification of project management system. The project management system is introduced and discussed for its evolving direction in this paper. (authors)

  11. A Synthesis and Survey of Critical Success Factors for Computer Technology Projects

    Science.gov (United States)

    Baker, Ross A.

    2012-01-01

    The author investigated the existence of critical success factors for computer technology projects. Current research literature and a survey of experienced project managers indicate that there are 23 critical success factors (CSFs) that correlate with project success. The survey gathered an assessment of project success and the degree to which…

  12. Urban development applications project. Urban technology transfer study

    Science.gov (United States)

    1975-01-01

    Technology transfer is defined along with reasons for attempting to transfer technology. Topics discussed include theoretical models, stages of the innovation model, communication process model, behavior of industrial organizations, problem identification, technology search and match, establishment of a market mechanism, applications engineering, commercialization, and management of technology transfer.

  13. Green technology foresight of products and materials - some reflections and results from an ongoing Danish project

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Pedersen, Thomas Thoning; Falch, Morten

    2005-01-01

    The article presents some methodological and theoretical reflections and some preliminary results from a Danish Green Technology Foresight project about environmental friendly products and materials, where the environmental potentials and risks from three technology areas are analysed: nano- bio...

  14. Expedited technology demonstration project. Project baseline revision 2.2 and FY96 plan

    International Nuclear Information System (INIS)

    1996-07-01

    The Expedited Technology Demonstration Project Plan, Mixed Waste Management Facility (MWMF) current baseline. The revised plan will focus efforts specifically on the demonstration of an integrated Molten Salt Oxidation (MSO) system. In addition to the MSO primary unit, offgas, and salt recycle subsystems, the demonstrations will include feed preparation and feed delivery systems, and the generation of robust final forms from process mineral residues. A simplified process flow chart for the expedited demonstration is provided. To minimize costs and to accelerate the schedule for deployment, the integrated system will be staged in an existing facility at LLNL equipped to handle hazardous and radioactive materials. The MSO systems will be activated in fiscal year 97, followed by the activation of feed preparation and final forms in fiscal year 98

  15. Manufacturing technology education development project. Project accomplishment summary for 91-Y12P-050-A1

    Energy Technology Data Exchange (ETDEWEB)

    Douglass, S. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Smith, R. [Tennessee Dept. of Education, Nashville, TN (United States)

    1996-09-25

    The purpose of the project was to provide a set of supplemental instructional equipment and materials to Tennessee high school students to raise their level of knowledge about manufacturing technologies with the hope that some of the best and brightest would choose manufacturing as a career path. The role of the Y-12 Plant was primarily technical: renovate the portable classroom; select and purchase appropriate equipment; install and test the equipment; assist in the development of the curriculum; train the initial group of teachers; and provide technical assistance where needed after the laboratory was deployed. The role of the Department of Education was to provide the mobile facility; assist in the design of the laboratory; lead the development of the curriculum; deploy the trailer; and develop the structure for administering the selection of schools, training teachers, and movement of the laboratory. The Department of Education as subcontracted with Middle Tennessee State University to handle the details of laboratory deployment.

  16. EU-project SMILE / Validation of the WPS effect with a component like cylindrical specimen

    Energy Technology Data Exchange (ETDEWEB)

    Kerkhof, Klaus [Materials Testing Institute, University of Stuttgart, Pfaffenwaldring 32, D 70569 Stuttgart (Germany); Roos, Eberhard [Materials Testing Institute University of Stuttgart, MPA Stuttgart, Otto-Graf-Institute (FMPA), Pfaffenwaldring 32, D - 70569 Stuttgart (Vaihingen) (Germany); Bezdikian, Georges [EDF, Reactor Pressure Vessel Life Management, EDF- Energy Branch - DPN, Nuclear Power Plants Support Center, Site Cap Ampere - 1 Place Pleyel, 93282 Saint Denis Cedex (France); Moinereau, Dominique; Dahl, Anna [EDF- R and D, Departement MMC, Site des Renardieres, 77818 Meret-sur-loing cedex (France)

    2005-07-01

    The Reactor Pressure Vessel (RPV) is an essential component, which is liable to limit the lifetime duration of PWR plants. The assessment of defects in RPV subjected to pressurized thermal shock (PTS) transients made at an European level generally does not necessarily consider the beneficial effect of the load history (Warm Pre-stress, WPS). The SMILE project - Structural Margin Improvements in aged embrittled RPV with Load history Effects - aims to give sufficient elements to demonstrate, to model and to validate the beneficial WPS effect. The project includes significant experimental work on WPS type experiments with C(T) specimens and a PTS type transient experiment on a large component. (authors)

  17. Validation of fast reactor thermomechanical and thermohydraulic codes. Final report of a co-ordinated research project. 1996-1999

    International Nuclear Information System (INIS)

    2002-11-01

    This report is a summary of the work performed under a co-ordinated research project (CRP) entitled Harmonization and Validation of Fast Reactor Thermomechanical and Thermo-Hydraulic Codes and Relations using Experimental Data. The project was organized by the IAEA on the recommendation of the IAEA's Technical Working Group on Fast Reactors (TWGFR) and carried out from 1996 to 1999. In certain conditions, temperature fluctuations in the coolant close to a structure caused by thermal striping can lead to thermomechanical damage to structures. Institutes from a number of Member States have an interest in improving engineering tools and prediction techniques concerning the characterization of the thermal striping effects, in which numerical models have a major role. Therefore, the IAEA through its advanced reactor technology development programme supports the activities of Member States in this area. Design analyses applied to thermal striping phenomena need to be firmly established, and the CRP provided a valuable tool in assessing their reliability. Eleven institutes from France, India, Italy, Japan, the Republic of Korea, the Russian Federation and the United Kingdom co-operated in this CRP. This report documents the CRP activities, provides the main results and recommendations and includes the work carried out by the research groups at the participating institutes within the CRP on harmonization and validation of fast reactor thermomechanical and thermohydraulic codes and relations

  18. Army Synthetic Validity Project: Report of Phase 3 Results. Volume 2. Research Instruments.

    Science.gov (United States)

    1991-02-01

    Bobko (Chair), Robert Linn, Richard Jaeger, Joyce Shields, and Robert Guion . EDGAR M. JOHNSON Technical Director v ARMY SYNTHETIC VALIDITY PROJECT...identified the problem and repaired the generator. 2. While on an FTX, the radio that this soldier was operating went out of U M A 0 C.NR tune. The...soldier failed to troubleshoot the radio . instead, he/she waited for a repair person. It was found that the radio only needed a minor adjustment which

  19. Including information technology project management in the nursing informatics curriculum.

    Science.gov (United States)

    Sockolow, Paulina; Bowles, Kathryn H

    2008-01-01

    Project management is a critical skill for nurse informaticists who are in prominent roles developing and implementing clinical information systems. It should be included in the nursing informatics curriculum, as evidenced by its inclusion in informatics competencies and surveys of important skills for informaticists. The University of Pennsylvania School of Nursing includes project management in two of the four courses in the master's level informatics minor. Course content includes the phases of the project management process; the iterative unified process methodology; and related systems analysis and project management skills. During the introductory course, students learn about the project plan, requirements development, project feasibility, and executive summary documents. In the capstone course, students apply the system development life cycle and project management skills during precepted informatics projects. During this in situ experience, students learn, the preceptors benefit, and the institution better prepares its students for the real world.

  20. Methodology for evaluation of railroad technology research projects

    Science.gov (United States)

    1981-04-01

    This Project memorandum presents a methodology for evaluating railroad research projects. The methodology includes consideration of industry and societal benefits, with special attention given to technical risks, implementation considerations, and po...

  1. Geothermal Reservoir Technology Research Program: Abstracts of selected research projects

    Energy Technology Data Exchange (ETDEWEB)

    Reed, M.J. (ed.)

    1993-03-01

    Research projects are described in the following areas: geothermal exploration, mapping reservoir properties and reservoir monitoring, and well testing, simulation, and predicting reservoir performance. The objectives, technical approach, and project status of each project are presented. The background, research results, and future plans for each project are discussed. The names, addresses, and telephone and telefax numbers are given for the DOE program manager and the principal investigators. (MHR)

  2. Novel High Pressure Pump-on-a-Chip Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — HJ Science & Technology, Inc proposes to develop a novel high pressure "pump-on-a-chip" and "valve-on-a-chip" microfluidic technology for NASA planetary science...

  3. Keynote presentation: Project Management, Technology and Evolving Work Processes

    DEFF Research Database (Denmark)

    Kampf, Constance Elizabeth

    Bridging the classroom and workplace is a challenge in the Project Management classroom because students rarely have the opportunity or the experience needed to head up large projects. So how can instructors present the opportunity to develop skills and gain experience needed to understand project...... not be used in the workplace when students graduate, but rather on the ”engine” of problem solving and communication strategies which drives projects and affects project success from the stakeholders point of view. Once students understand the engine, they are able to not only use software tools...... and practice in assignments enables learners to gain relevant experience with and build their skills for applying project management tools in authentic contexts. This combination prepares students for a rapidly changing work environment by helping them focus on problem solving skills relevant to Project...

  4. Art-technology Collaboration and Motivation Sources in Technologically Supported Artwork Buildup Project

    Science.gov (United States)

    Happonen, Ari; Stepanov, Alexander; Hirvimäki, Marika; Manninen, Matti; Dennisuk, William; Piili, Heidi; Salminen, Antti

    This study is based on observed outcomes of motivation sources and collaboration elements from a living lab style co-operation project. In this project, researchers of engineering science and an individual artist co-operated closely. The goal was to create an artwork made from corrugated board by utilizing laser cutting technology. In the context of this study, the scientist and the artist participated in the whole process and the research was done in living lab style arrangement. The research process integrated multiple experts from different scientific fields and experts from practical contexts to develop a new art design and art forming process with utilization of laser cutting technology. The purpose of this study was to find out and discuss about the key elements for high motivation to work together and then reveal the best practice findings in this co-operative development process. Elements were studied from three different points of view: artists view, collaboration motivation view and practical cutting point of view. The elements were analysed by utilizing an active documentation collection methodology, during the whole process, and by using story-telling methodology. The documents were used to reflect facts and feelings from the co-operation, the work process and the challenges encountered within collaboration. This article contributes to research methodology and best practice context by revealing the key elements, which build the motivation compelling (as personal inner motivation) the participant to work out of office hours as well as on weekends. Furthermore, as the artist-engineer co-operation is not frequently reported in scientific literature, this study reveals valuable information for practitioners and co-operation researchers.

  5. Solid Oxide Fuel Cell Technology Stationary Power Application Project

    Energy Technology Data Exchange (ETDEWEB)

    Joseph Pierre

    2009-03-05

    The objectives of this program were to: (1) Develop a reliable, cost-effective, and production-friendly technique to apply the power-enhancing layer at the interface of the air electrode and electrolyte of the Siemens SOFC; (2) Design, build, install, and operate in the field two 5 kWe SOFC systems fabricated with the state-of-the-art cylindrical, tubular cell and bundle technology and incorporating advanced module design features. Siemens successfully demonstrated, first in a number of single cell tests and subsequently in a 48-cell bundle test, a significant power enhancement by employing a power-enhancing composite interlayer at the interface between the air electrode and electrolyte. While successful from a cell power enhancement perspective, the interlayer application process was not suitable for mass manufacturing. The application process was of inconsistent quality, labor intensive, and did not have an acceptable yield. This program evaluated the technical feasibility of four interlayer application techniques. The candidate techniques were selected based on their potential to achieve the technical requirements of the interlayer, to minimize costs (both labor and material), and suitably for large-scale manufacturing. Preliminary screening, utilizing lessons learned in manufacturing tubular cells, narrowed the candidate processes to two, ink-roller coating (IRC) and dip coating (DC). Prototype fixtures were successfully built and utilized to further evaluate the two candidate processes for applying the interlayer to the high power density Delta8 cell geometry. The electrical performance of interlayer cells manufactured via the candidate processes was validated. Dip coating was eventually selected as the application technique of choice for applying the interlayer to the high power Delta8 cell. The technical readiness of the DC process and product quality was successfully and repeatedly demonstrated, and its throughput and cost are amenable to large scale

  6. Assistive technology for visually impaired women for use of the female condom: a validation study

    Directory of Open Access Journals (Sweden)

    Luana Duarte Wanderley Cavalcante

    2015-02-01

    Full Text Available OBJECTIVE To validate assistive technology for visually impaired women to learn how to use the female condom. METHOD a methodological development study conducted on a web page, with data collection between May and October 2012. Participants were 14 judges; seven judges in sexual and reproductive health (1st stage and seven in special education (2nd stage. RESULTS All items have reached the adopted parameter of 70% agreement. In Stage 1 new materials were added to represent the cervix, and instructions that must be heard twice were included in the 2nd stage. CONCLUSION The technology has been validated and is appropriate for its objectives, structure / presentation and relevance. It is an innovative, low cost and valid instrument for promoting health and one which may help women with visual disabilities to use the female condom.

  7. An Examination of the Determinants of Top Management Support of Information Technology Projects

    Science.gov (United States)

    Mahoney, Michael L.

    2011-01-01

    Despite compelling evidence that top management support promotes information technology project success, existing research fails to offer insight into the antecedents of top management support of such projects. This gap in the literature is significant since the exploitation of information technology offers organizations unique opportunities for…

  8. Airspace Technology Demonstration 3 (ATD-3): Applied Traffic Flow Management Project Overview

    Science.gov (United States)

    Gong, Chester

    2016-01-01

    ATD-3 Project Overview for 3rd Joint Workshop for KAIA-KARI - NASA ATM Research Collaboration. This presentation gives a high level description of the ATD-3 project and related technologies. These technologies include Multi-Flight Common Routes (MFCR), Traffic Aware Strategic Aircrew Requests (TASAR) and Dynamic Routes for Arrivals in Weather (DRAW).

  9. Financing Projects That Use Clean-Energy Technologies. An Overview of Barriers and Opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Goldman, D. P. [New Energy Capital, LLC, Hanover, NH (United States); McKenna, J. J. [Hamilton Clark & Co., Washington, DC (United States); Murphy, L. M. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2005-10-01

    This technical paper describes the importance of project financing for clean-energy technology deployment. It describes the key challenges in financing clean-energy technology projects, including technical risks, credit worthiness risk, revenue security risk, market competition, scale and related cost, as well as first-steps to overcome those barriers.

  10. Projects in Technology Education and Fostering Learning: The Potential and Its Realization

    Science.gov (United States)

    Barak, Moshe; Shachar, Ahron

    2008-06-01

    The current study aimed at examining the efficacy of technological projects as learning tools by exploring the following questions: the extent to which projects in technology develop students as independent learners; the types of knowledge the students deal with in working on their projects; the role of problem-solving in technological projects; and how projects integrate into traditional schooling. The subjects were 53 high school (12th grade) students who prepared graduating projects in technology under the supervision of nine teachers. Data were collected by observing the students in the laboratory, administrating two questionnaires to both the students and the teachers, and analyzing 25 portfolios prepared by the students of their projects. The findings indicate that projects in technology provide a good opportunity to engage students in challenging tasks that enhance their learning skills. To maximize this potential, it is necessary to employ the project method from the early stages of learning technology. It is especially important that teachers having a strong engineering orientation also acquire pedagogical knowledge on issues such as fostering independent learning, creativity, peer learning and reflective practice in the technological classroom.

  11. Waste minimization and pollution prevention technology transfer : the Airlie House Projects

    International Nuclear Information System (INIS)

    Gatrone, R.; McHenry, J.; Myron, H.; Thout, J. R.

    1998-01-01

    The Airlie House Pollution Prevention Technology Transfer Projects were a series of pilot projects developed for the US Department of Energy with the intention of transferring pollution prevention technology to the private sector. The concept was to develop small technology transfer initiatives in partnership with the private sector. Argonne National Laboratory developed three projects: the microscale chemistry in education project, the microscale cost benefit study project, and the Bethel New Life recycling trainee project. The two microscale chemistry projects focused on introducing microscale chemistry technologies to secondary and college education. These programs were inexpensive to develop and received excellent evaluations from participants and regulators. The Bethel New Life recycling trainee project provided training for two participants who helped identify recycling and source reduction opportunities in Argonne National Laboratory's solid waste stream. The pilot projects demonstrated that technology transfer initiatives can be developed and implemented with a small budget and within a short period of time. The essential components of the pilot projects were identifying target technologies that were already available, identifying target audiences, and focusing on achieving a limited but defined objective

  12. Ella-V and technology usage technology usage in an english language and literacy acquisition validation randomized controlled trial study

    Directory of Open Access Journals (Sweden)

    Roisin P. Corcoran

    2014-12-01

    Full Text Available This paper describes the use of technology to provide virtual professional development (VPD for teachers and to conduct classroom observations in a study of English Language Learner (ELL instruction in grades K–3. The technology applications were part of a cluster randomized control trial (RCT design for a federally funded longitudinal validation study of a particular program, English Language and Literacy Acquisition-Validation, ELLA- V, to determine its degree of impact on English oral language/literacy, reading, and science across 63 randomly assigned urban, suburban, and rural schools (first year of implementation. ELLA-V also examines the impact of bimonthly VPD for treatment teachers compared to comparison group teachers on pedagogical skills, measured by sound observation instruments, and on student achievement, measured by state/national English language/literacy/reading tests and a national science test. This study features extensive technology use via virtual observations, bimonthly VPD, and randomly assigned treatment and control schools with students served in English as second language (ESL instructional time. The study design and methodology are discussed relativeto the specialized uses of technology and issues involving the evaluation of technology’s contribution to the intervention of interest and of the efficient, cost-effective execution of the study.

  13. BIM integration in education: A case study of the construction technology project Bolt Tower Dolni Vitkovice

    Science.gov (United States)

    Venkrbec, Vaclav; Bittnerova, Lucie

    2017-12-01

    Building information modeling (BIM) can support effectiveness during many activities in the AEC industry. even when processing a construction-technological project. This paper presents an approach how to use building information model in higher education, especially during the work on diploma thesis and it supervision. Diploma thesis is project based work, which aims to compile a construction-technological project for a selected construction. The paper describes the use of input data, working with them and compares this process with standard input data such as printed design documentation. The effectiveness of using the building information model as a input data for construction-technological project is described in the conclusion.

  14. ECUT: Energy Conversion and Utilization Technologies program. Biocatalysis project

    Science.gov (United States)

    1990-01-01

    The Biocatalysis Project is a mission-oriented, applied research and exploratory development activity directed toward resolution of the major generic technical barriers that impede the development of biologically catalyzed commercial chemical production. The approach toward achieving project objectives involves an integrated participation of Universities, Industrial Companies and Government Research Laboratories. The Project's technical activities were organized into three work elements: molecular modeling and applied genetics; bioprocess engineering; and bioprocess design and assessment.

  15. Integration of Old and New Technology: Computers, Photography, and Video Technology in an Even Start Family Literacy Project.

    Science.gov (United States)

    Landerholm, Elizabeth

    1999-01-01

    McCosh Even Start, a federally funded family-literacy project located in a Chicago school, used older donated Apple computers, video technology, and photography to develop literacy and also to evaluate parents' and children's literacy progress. Older and newer technologies were successfully combined. (MLH)

  16. Scientific projection paper for cluster B: technology development

    International Nuclear Information System (INIS)

    Sinclair, W.K.

    1980-01-01

    This section deals with new technology developments in fields primarily concerned with dose reduction and matters relating to radiation protection rather than toward technology developments that might enhance the beneficial uses of ionizing radiation, except for the consideration of diagnostic techniques which may result in alternatives to ionizing radiation. Three major areas have been identified in which progress can be made via technology development: diagnostic radiology, occupational exposure and exposure of the public to radioactivity

  17. Advanced Multimission Operations Systems Tech (AMMOS) Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — AMMOS Technology tasks include: - Enhance mission planning and sequence generation tools with constraint based automated planning and scheduling techniques to enable...

  18. Advanced Technology MEMS-based Acoustic Array Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Interdisciplinary Consulting Corporation proposes a technological advancement of current state-of-the-art acoustic energy harvester for harsh environment...

  19. A proposed project risk management framework in the information technology environment / Herbert James van Antwerp

    OpenAIRE

    Van Antwerp, Herbert James

    2010-01-01

    Information Technology (IT) projects that resulted from the accelerated technological pace of change, will enable a path of growth and long term return on investment (ROI) for organisations. However, embarking on such large scale investments leave little opportunity to turn back, and sound project management principles will be required to effectively manage unforeseen issues during the project life cycle, and if these fail, the organisations will be constantly functioning in cr...

  20. Final Project Summary Report Bechtel Nevada and Fiberchem Environmental, Inc., Cooperative Research and Technology Development Project

    Energy Technology Data Exchange (ETDEWEB)

    R. J. Pollina

    1999-04-01

    This is a report summarizing work on a small project dedicated to adapting a new chemical sensing platform for the US Department of Energy and its customers. At the same time and in the spirit of technology transfer, FCI Environmental, Inc., would receive technical support in the form of expertise from the US Department of Energy to assist in developing this product. The sensor is a hybrid integrated-circuit, optical waveguide, chemical sensor that is patented by FCI Environmental, Inc., and manufactured under license by Texas Instruments, Inc. A down-hole penetrometer probe was designed for use in hot, 60 C, hydrocarbon-saturated, saline environment at a depth of 200 feet. The probe design includes three chemical sensing, hybrid integrated-circuits with chemical reference and measurement channels, a water seal, output electronics, and a removable measurement head for replacement in the field. A hand-held chemical detector prototype--containing a hybrid integrated-circuit chemical sensor with reference channel, user alarm, and level display--was designed and constructed, and a software interface developed to operate the hand-held sensor interfaced with a laboratory data acquisition system.

  1. Interdisciplinary Project-Based Learning: Technology for Improving Student Cognition

    Science.gov (United States)

    Stozhko, Natalia; Bortnik, Boris; Mironova, Ludmila; Tchernysheva, Albina; Podshivalova, Ekaterina

    2015-01-01

    The article studies a way of enhancing student cognition by using interdisciplinary project-based learning (IPBL) in a higher education institution. IPBL is a creative pedagogic approach allowing students of one area of specialisation to develop projects for students with different academic profiles. The application of this approach in the Ural…

  2. A Manhattan Project in Educational Technology, Part II.

    Science.gov (United States)

    Roberts, Wesley K.

    The initial four phases of the Training Extension Course (TEC), a project to remedy deficiencies in training programs for armed forces recruits, employed systematic instructional development and extensive audiovisual resources. The project required subcontracting for lesson production and modifications in personnel and budgeting. Posttest evidence…

  3. Technological Innovation Projects: Proposal For an Integrative Model Between Project Management and Knowledge Management in a Customer-Supplier Perspective

    Directory of Open Access Journals (Sweden)

    Edval da Silva Tavares

    2014-10-01

    Full Text Available In face of strong competition, companies in Brazil have increased their financial investments in automation, offering new products and services and reducing operating costs. These companies are focusing their efforts on core competencies and, therefore, they often lack the internal expertise to implement new projects, especially those that bring technological innovation. For this reason, we use the processes of outsourcing or subcontracting to help implement such projects. The unit of analysis in this study is the project and the object of the study to analyze the process of knowledge transfer from a provider to a customer during the duration of the project, which involves new technologies. The main motivation of this work is to address the acquisition and retention of new knowledge related to projects designed for business customers. We have developed a study of three cases of multiple financial firms that buy new technologies and two suppliers of information technology. As a practical result, a management model of knowledge transfer and retention of knowledge in client companies is proposed and incorporated into project management.

  4. In-Space Assembly and Construction Technology Project Summary: Infrastructure Operations Area of the Operations Technology Program

    Science.gov (United States)

    Bush, Harold

    1991-01-01

    Viewgraphs describing the in-space assembly and construction technology project of the infrastructure operations area of the operation technology program are presented. Th objective of the project is to develop and demonstrate an in-space assembly and construction capability for large and/or massive spacecraft. The in-space assembly and construction technology program will support the need to build, in orbit, the full range of spacecraft required for the missions to and from planet Earth, including: earth-orbiting platforms, lunar transfer vehicles, and Mars transfer vehicles.

  5. An Empirical Analysis of Technology Transfer of National R&D Projects in South Korea

    OpenAIRE

    Kim, Mi-Sun; Shin, Dong-Ho; Kim, Jae-Soo; Lee, Byeong-Hee

    2015-01-01

    This study is aimed at seeking policy implications for the policy makers of South Korean government and finding a direction to support R&D institutions in performing R&D activities more efficiently, by analyzing the factors influencing technology transfer of the national R&D projects. The data retrieved from NTIS (National Science & Technology Information Service) was used in analyzing the results of 575 projects with 1,903 cases of technology transfer, performed by the Ministry of Science, I...

  6. New Technologies for DNA analysis-A review of the READNA Project

    NARCIS (Netherlands)

    McGinn, Steven; Bauer, David; Brefort, Thomas; Dong, Liqin; El-Sagheer, Afaf; Elsharawy, Abdou; Evans, Geraint; Falk-Sörqvist, Elin; Forster, Michael; Fredriksson, Simon; Freeman, Peter; Freitag, Camilla; Fritzsche, Joachim; Gibson, Spencer; Gullberg, Mats; Gut, Marta; Heath, Simon; Heath-Brun, Isabelle; Heron, Andrew J; Hohlbein, Johannes; Ke, Rongqin; Lancaster, Owen; Le Reste, Ludovic; Maglia, Giovanni; Marie, Rodolphe; Mauger, Florence; Mertes, Florian; Mignardi, Marco; Moens, Lotte; Oostmeijer, Jelle; Out, Ruud; Pedersen, Jonas Nyvold; Persson, Fredrik; Picaud, Vincent; Rotem, Dvir; Schracke, Nadine; Sengenes, Jennifer; Stähler, Peer F; Stade, Björn; Stoddart, David; Teng, Xia; Veal, Colin D; Zahra, Nathalie; Bayley, Hagan; Beier, Markus; Brown, Tom; Dekker, Cees; Ekström, Björn; Flyvbjerg, Henrik; Franke, Andre; Guenther, Simone; Kapanidis, Achillefs N; Kaye, Jane; Kristensen, Anders; Lehrach, Hans; Mangion, Jonathan; Sauer, Sascha; Schyns, Emile; Tost, Jörg; van Helvoort, Joop M L M; van der Zaag, Pieter J; Tegenfeldt, Jonas O; Brookes, Anthony J; Mir, Kalim; Nilsson, Mats; Willcocks, Spike; Gut, Ivo G

    2016-01-01

    The REvolutionary Approaches and Devices for Nucleic Acid analysis (READNA) project received funding from the European Commission for 4 1/2 years. The objectives of the project revolved around technological developments in nucleic acid analysis. The project partners have discovered, created and

  7. New technologies for DNA analysis – a review of the READNA Project

    NARCIS (Netherlands)

    McGinn, Steven; Bauer, David; Brefort, Thomas; Dong, Liqin; El-Sagheer, Afaf; Elsharawy, Abdou; Evans, Geraint; Falk-Sörqvist, Elin; Forster, Michael; Fredriksson, Simon; Freeman, Peter; Freitag, Camilla; Fritzsche, Joachim; Gibson, Spencer; Gullberg, Mats; Gut, Marta; Heath, Simon; Heath-Brun, Isabelle; Heron, Andrew J.; Hohlbein, Johannes; Ke, Rongqin; Lancaster, Owen; Reste, Le Ludovic; Maglia, Giovanni; Marie, Rodolphe; Mauger, Florence; Mertes, Florian; Mignardi, Marco; Moens, Lotte; Oostmeijer, Jelle; Out, Ruud; Pedersen, Jonas Nyvold; Persson, Fredrik; Picaud, Vincent; Rotem, Dvir; Schracke, Nadine; Sengenes, Jennifer; Stähler, Peer F.; Stade, Björn; Stoddart, David; Teng, Xia; Veal, Colin D.; Zahra, Nathalie; Bayley, Hagan; Beier, Markus; Brown, Tom; Dekker, Cees; Ekström, Björn; Flyvbjerg, Henrik; Franke, Andre; Guenther, Simone; Kapanidis, Achillefs N.; Kaye, Jane; Kristensen, Anders; Lehrach, Hans; Mangion, Jonathan; Sauer, Sascha; Schyns, Emile; Tost, Jörg; Helvoort, van Joop M.L.M.; Zaag, van der Pieter J.; Tegenfeldt, Jonas O.; Brookes, Anthony J.; Mir, Kalim; Nilsson, Mats; Willcocks, James P.; Gut, Ivo G.

    2016-01-01

    The REvolutionary Approaches and Devices for Nucleic Acid analysis (READNA) project received funding from the European Commission for 4 1/2 years. The objectives of the project revolved around technological developments in nucleic acid analysis. The project partners have discovered, created and

  8. Harnessing the Power of Technologies to Manage Collaborative e-Learning Projects in Dispersed Environments

    Science.gov (United States)

    Gosper, Maree Veroncia; McNeill, Margot Anne; Woo, Karen

    2010-01-01

    "The impact of web-based lecture technologies on current and future practice in learning and teaching" was a collaborative project across four Australian universities, funded by the Australian Learning and Teaching Council (ALTC). The project was both exploratory and developmental in nature and according to the project's external…

  9. Success Rates by Software Development Methodology in Information Technology Project Management: A Quantitative Analysis

    Science.gov (United States)

    Wright, Gerald P.

    2013-01-01

    Despite over half a century of Project Management research, project success rates are still too low. Organizations spend a tremendous amount of valuable resources on Information Technology projects and seek to maximize the utility gained from their efforts. The author investigated the impact of software development methodology choice on ten…

  10. Can CDM bring technology transfer to China?-An empirical study of technology transfer in China's CDM projects

    International Nuclear Information System (INIS)

    Wang Bo

    2010-01-01

    China has undertaken the greatest number of projects and reported the largest emission reductions on the global clean development mechanism (CDM) market. As technology transfer (TT) was designed to play a key role for Annex II countries in achieving greenhouse gas emission reductions, this study examines various factors that have affected CDM and TT in China. The proportion of total income derived from the certified emissions reductions (CER) plays a key role in the project owners' decision to adopt foreign technology. Incompatibility of CDM procedures with Chinese domestic procedures, technology diffusion (TD) effects, Chinese government policy and the role of carbon traders and CDM project consultants all contribute to the different degrees and forms of TT. International carbon traders and CDM consultants could play a larger role in TT in China's CDM projects as investors and brokers in the future.

  11. [A project to improve the validity rate for nursing staff operating single door autoclave sterilizers].

    Science.gov (United States)

    Chen, Chun-Hung; Li, Cheng-Chang; Chou, Chuan-Yu; Chen, Shu-Hwa

    2009-08-01

    This project was designed to improve the low validity rate for nurses responsible to operate single door autoclave sterilizers in the operating room. By investigating the current status, we found that the nursing staff validity rate of cognition on the autoclave sterilizer was 85%, and the practice operating check validity rate was only 80%. Such was due to a lack of in-service education. Problems with operation included: 1. Unsafe behaviors - not following standard procedure, lacking relevant operating knowledge and absence of a check form; 2. Unsafe environment - the conveying steam piping was typically not covered and lacked operation marks. Recommended improvement measures included: 1. holding in-service education; 2. generating an operation procedure flow chart; 3. implementing obstacle eliminating procedures; 4. covering piping to prevent fire and burns; 5. performing regular checks to ensure all procedures are followed. Following intervention, nursing staff cognition rose from 85% to 100%, while the operation validity rate rose from 80% to 100%. These changes ensure a safer operating room environment, and helps facilities move toward a zero accident rate in the healthcare environment.

  12. NPOESS Preparatory Project Validation Program for Atmsophere Data Products from VIIRS

    Science.gov (United States)

    Starr, D.; Wong, E.

    2009-12-01

    The National Polar-orbiting Operational Environmental Satellite Suite (NPOESS) Program, in partnership with National Aeronautical Space Administration (NASA), will launch the NPOESS Preparatory Project (NPP), a risk reduction and data continuity mission, prior to the first operational NPOESS launch. The NPOESS Program, in partnership with Northrop Grumman Aerospace Systems (NGAS), will execute the NPP Validation program to ensure the data products comply with the requirements of the sponsoring agencies. Data from the NPP Visible/Infrared Imager/Radiometer Suite (VIIRS) will be used to produce Environmental Data Records (EDR's) for aerosol and clouds, specifically Aerosol Optical Thickness (AOT), Aerosol Particle Size Parameter (APSP), and Suspended Matter (SM); and Cloud Optical Thickness (COT), Cloud Effective Particle Size (CEPS), Cloud Top Temperature (CTT), Height (CTH) and Pressure (CTP), and Cloud Base Height (CBH). The Aerosol and Cloud EDR Validation Program is a multifaceted effort to characterize and validate these data products. The program involves systematic comparison to heritage data products, e.g., MODIS, and ground-based correlative data, such as AERONET and ARM data products, and potentially airborne field measurements. To the extent possible, the domain is global. The program leverages various investments that have and are continuing to be made by national funding agencies in such resources, as well as the operational user community and the broad Earth science user community. This presentation will provide an overview of the approaches, data and schedule for the validation of the NPP VIIRS Aerosol and Cloud environmental data products.

  13. Deploying innovative technologies to improve DOE D ampersand D project baselines

    International Nuclear Information System (INIS)

    Rose, R.W.

    1997-05-01

    The insertion of innovative technologies to replace baseline technologies used in cost estimation and planning of DOE D ampersand D projects is considered a high risk endeavor by project and programmatic decision makers. It is almost always considered safer to go with the open-quotes devil you knowclose quotes than use a new or untried technology, methodology or system. The decision on the specific technology to be utilized to remediate a problem is often made months or years in advance of execution, and the highly proscriptive documentation of agreements necessary to obtain stakeholder and regulator approval of remedial plans is often counterproductive to considering improved technologies

  14. Using Action Research Projects to Examine Teacher Technology Integration Practices

    Science.gov (United States)

    Dawson, Kara

    2012-01-01

    This study examined the technology integration practices of teachers involved in a statewide initiative via one cycle of action research. It differs from other studies of teacher technology integration practices because it simultaneously involved and provided direct benefits to teachers and researchers. The study used thematic analysis to provide…

  15. Examining the Relationship between Technology Leadership Behaviors and Project Success

    Science.gov (United States)

    Bolman, David B.

    2012-01-01

    Organizations invest substantial resources into technology initiatives intended to generate advantages associated with improved use of human resources, increased operational efficiencies, and creating new capacities within processes and products; however, there is limited knowledge regarding how technology leadership behaviors influence project…

  16. How Undergraduate Students Use Social Media Technologies to Support Group Project Work

    Science.gov (United States)

    McAliney, Peter J.

    2013-01-01

    Technology continues to evolve and become accessible to students in higher education. Concurrently, teamwork has become an important skill in academia and the workplace and students have adopted established technologies to support their learning in both individual and team project work. Given the emergence of social media technologies, I examined…

  17. Validation evaluation of the technological process of leonurus turkestanicus liquid extract production

    Directory of Open Access Journals (Sweden)

    Олеся Владимировна Сермухамедова

    2016-01-01

    Full Text Available Aim. The transfer of Leonurus turkestanicus liquid extract production technology and its validation at LLC «FitOleum» (GMP compliance report conclusion CT PK 1617-2006 «Good Manufacturing Practice. Remedies production. Basic provisions» № 18, Nov. 21, 2014..Methods. Different known statistical methods have been used to evaluate and to interpret both technological parameters and indicators that were determined during quality control of herbal material, intermediate product, and final product. A Statistical process control (SPC concept is applied as a basis for all accepted international instruments ICH Q8 «Pharmaceutical Development», ICH Q10 «Pharmaceutical Quality System», PAT Concept, and FDA Guidance for Process Validation.Results. As a result of research normative documents that regulate manufacturing process in the test conditions have been developed. A comparable data across technological parameters of three consistently manufactured test production series have been obtained, as well as validity of the extract production technological process has been proved.Conclusion. On the basis of research, the experimental-industrial procedure for Leonurus turkestanicus herb liquid extract production at the LLC «FitOleum» has been developed

  18. Validation of Material Models For Automotive Carbon Fiber Composite Structures Via Physical And Crash Testing (VMM Composites Project)

    Energy Technology Data Exchange (ETDEWEB)

    Coppola, Anthony [General Motors Company, Flint, MI (United States); Faruque, Omar [Ford Motor Company, Dearborn, MI (United States); Truskin, James F [FCA US LLC, Auburn Hills, MI (United States); Board, Derek [Ford Motor Company, Dearborn, MI (United States); Jones, Martin [Ford Motor Company, Dearborn, MI (United States); Tao, Jian [FCA US LLC, Auburn Hills, MI (United States); Chen, Yijung [Ford Motor Company, Dearborn, MI (United States); Mehta, Manish [M-Tech International LLC, Dubai (United Arab Emirates)

    2017-09-27

    advances in order to assess the correlation of the predicted results to the physical tests. The FBCC was developed to meet a goal of 30-35% mass reduction while aiming for equivalent energy absorption as a steel component for which baseline experimental results were obtained from testing in the same crash modes. The project also evaluated crash performance of thermoplastic composite structures fabricated from commercial prepreg materials and low cost carbon fiber sourced from Oak Ridge National Laboratory. The VMM Project determined that no set of predictions from a CAE supplier were found to be universally accurate among all the six crash modes evaluated. In general, crash modes that were most dependent on the properties of the prepreg were more accurate than those that were dependent on the behavior of the joints. The project found that current CAE modeling methods or best practices for carbon fiber composites have not achieved standardization, and accuracy of CAE is highly reliant on the experience of its users. Coupon tests alone are not sufficient to develop an accurate material model, but it is necessary to bridge the gap between the coupon data and performance of the actual structure with a series of subcomponent level tests. Much of the unreliability of the predictions can be attributed to shortcomings in our ability to mathematically link the effects of manufacturing and material variability into the material models. This is a subject of ongoing research in the industry. The final report is organized by key technical tasks to describe how the validation project developed, modeled and compared crash data obtained on the composite FBCC to the multiple sets of CAE predictions. Highlights of the report include a discussion of the quantitative comparison between predictions and experimental data, as well as an in-depth discussion of remaining technological gaps that exist in the industry, which are intended to spur innovations and improvements in CAE technology.

  19. Advanced Reactor Technology/Energy Conversion Project FY17 Accomplishments.

    Energy Technology Data Exchange (ETDEWEB)

    Rochau, Gary E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2018-02-01

    The purpose of the ART Energy Conversion (EC) Project is to provide solutions to convert the heat from an advanced reactor to useful products that support commercial application of the reactor designs.

  20. Conceptualising a multidimensional model of information communication and technology project complexity

    Directory of Open Access Journals (Sweden)

    Nazeer Joseph

    2017-11-01

    Full Text Available Background: Information communication and technology (ICT projects are different from other projects, such as construction, and require a new perspective to determine their true nature. The lacklustre state of ICT projects has plagued researchers and practitioners for decades as they are yet to understand why ICT projects do not perform. Literature places significant emphasis on success criteria and success factors for determining project success, but this is a unilateral view as the level of complexity involved is underestimated. ICT projects, however, are multifaceted as there are a number of dimensions that influence the management and outcome of a project. Objectives: This article aimed to illuminate how the dimensions are interdependent and interconnected through the construction of a conceptual model of ICT project complexity. Methods: Content analysis was used to identify and understand the various dimensions and facilitated construction of the model. Results: The article identified five dimensions that affect ICT projects, viz. project success, project lifecycle, project complexity, project types and project methods. Each dimension was analysed to understand the key constructs and elements that need to be considered. The dimensions were mapped in a multidimensional model. Conclusion: The multidimensional model of ICT project complexity can be used by ICT project managers to more effectively manage projects as they are provided with a greater understanding of ICT project influences.

  1. Technology projects for characterization--monitoring of volatile organic compounds (VOCs)

    Energy Technology Data Exchange (ETDEWEB)

    Junk, G.A.; Haas, W.J. Jr.

    1992-07-01

    One hundred thirty technology project titles related to the characterization of volatile organic compounds (VOCs) at an arid site are listed alphabetically by first contact person in a master compilation that includes phone numbers, addresses, keywords, and short descriptions. Separate tables are presented for 62 field-demonstrated, 36 laboratory-demonstrated, and 35 developing technology projects. The technology projects in each of these three categories are also prioritized in separate summary tables. Additional tables are presented for a number of other categorizations of the technology projects: In Situ; Fiberoptic; Mass Spectrometer; Optical Spectroscopy; Raman or SERS; Ion Mobility or Acoustic; Associated; and Commercial. Four lists of contact person names are provided so details concerning the projects that deal with sampling, and VOCs in gases, waters, and soils (sediments) can be obtained. Finally, seven wide-ranging conclusions based on observations and experiences during this work are presented.

  2. Technology projects for characterization--monitoring of volatile organic compounds (VOCs)

    International Nuclear Information System (INIS)

    Junk, G.A.; Haas, W.J. Jr.

    1992-07-01

    One hundred thirty technology project titles related to the characterization of volatile organic compounds (VOCs) at an arid site are listed alphabetically by first contact person in a master compilation that includes phone numbers, addresses, keywords, and short descriptions. Separate tables are presented for 62 field-demonstrated, 36 laboratory-demonstrated, and 35 developing technology projects. The technology projects in each of these three categories are also prioritized in separate summary tables. Additional tables are presented for a number of other categorizations of the technology projects: In Situ; Fiberoptic; Mass Spectrometer; Optical Spectroscopy; Raman or SERS; Ion Mobility or Acoustic; Associated; and Commercial. Four lists of contact person names are provided so details concerning the projects that deal with sampling, and VOCs in gases, waters, and soils (sediments) can be obtained. Finally, seven wide-ranging conclusions based on observations and experiences during this work are presented

  3. The UltraLightweight Technology for Research in Astronomy (ULTRA) Project

    Science.gov (United States)

    Twarog, B. A.; Anthony-Twarog, B. J.; Shawl, S. J.; Hale, R.; Taghavi, R.; Fesen, R.; Etzel, P. B.; Martin, R.; Romeo, R.

    2004-12-01

    The collaborative focus of four academic departments (Univ. of Kansas Aerospace Engineering, Univ. of Kansas Physics & Astronomy, San Diego State University Astronomy and Dartmouth College Astronomy) and a private industry partner (Composite Mirror Applications, Inc.-CMA, Inc.) is a three-year plan to develop and test UltraLightweight Technology for Research in Astronomy (ULTRA). The ULTRA technology, using graphite fiber composites to fabricate mirrors and telescope structures, offers a versatile and cost-effective tool for optical astronomy, including the economical fabrication and operation of telescopes ranging from small (1m or smaller) aperture for education and research to extremely large (30m+) segmented telescopes (ELTs). The specific goal of this NSF-funded three-year Major Research Instrumentation project is to design, build, and test a 1m-class optical tube assembly (OTA) and mirrors constructed entirely from composites. In the first year of the project, the team has built and is field-testing two 0.4m prototypes to validate the optical surfaces and figures of the mirrors and to test and refine the structural dynamics of the OTA. Preparation for design and construction of the 1m telescope is underway. When completed in late 2005, the ULTRA telescope will be operated remotely from Mt. Laguna Observatory east of San Diego, where it will undergo a period of intensive optical and imaging tests. A 0.4m prototype OTA with mirrors (12 kg total weight) will be on display at the meeting. Support of this work by NSF through grants AST-0320784 and AST-0321247, NASA grant NCC5-600, the University of Kansas, and San Diego State University is gratefully acknowledged.

  4. Automated Service Discovery using Autonomous Control Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — With the advent of mobile commerce technologies, the realization of pervasive computing and the formation of ad-hoc networks can be leveraged to the benefit of the...

  5. Technologies Enabling Exploration of Skylights, Lava Tubes and Caves Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Missions to date have orbited and roved, but sub-planetary worlds elude exploration. This investigation proposes to develop technology for venturing underground and...

  6. Polymer Matrix Composites using Fused Deposition Modeling Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Fused deposition modeling (FDM) is an additive manufacturing technology that allows fabrication of complex three-dimensional geometries layer-by-layer. The goal of...

  7. Biomedical Monitoring by a Novel Noncontact Radio Frequency Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This technology will be a quantum advance in cardiac monitoring and will be applicable in numerous situations such as for immediate assessment and monitoring of...

  8. Affordable Integrated Technology Projects Science Education towards New Horizons

    Science.gov (United States)

    Paoletti, Franco; Carlucci, Lisa Marie

    2009-03-01

    The new-era concept of education supports a type of instruction whereby technology directly acts as a conduit of change, fundamentally altering what is learned, how it is learned, and the role of the educator in the classroom. In our current world, the learning about technology itself has become a goal and a means to successful participation in today's society. Efficient integration of technology to enhance and support the educational process will: 1) provide educators with the resources and the freedom to actualize innovative educational programs; 2) allow educators to be successful in challenging each student to reach his/her highest potential to ultimately increase academic achievement. This study analyzes what technology integration into education means identifying the benefits and the challenges that educators need to meet in order to be successful in their efforts while providing examples of how to successfully implement effective programs under budgetary constraints.

  9. SET-bullying: presentation of a collaborative project and discussion of its internal and external validity.

    Science.gov (United States)

    Chalamandaris, Alexandros-Georgios; Wilmet-Dramaix, Michèle; Eslea, Mike; Ertesvåg, Sigrun Karin; Piette, Danielle

    2016-04-12

    Since the early 1980s, several school based anti-bullying interventions (SBABI) have been implemented and evaluated in different countries. Some meta-analyses have also drawn conclusions on the effectiveness of SBABIs. However, the relationship between time and effectiveness of SBABIs has not been fully studied. For this aim, a collaborative project, SET-Bullying, is established by researchers from Greece, Belgium, Norway and United Kingdom. Its primary objective is to further understand and statistically model the relationship between the time and the sustainability of the effectiveness of SBABI. The secondary objective of SET-Bullying is to assess the possibility of predicting the medium-term or long-term effectiveness using as key information the prior measurement and the short-term effectiveness of the intervention. Researchers and owners of potentially eligible databases were asked to participate in this effort. Two studies have contributed data for the purpose of SET-Bullying. This paper summarizes the main characteristics of the participating studies and provides a high level overview of the collaborative project. It also discusses on the extent to which both study and project characteristics may pose threats to the expected internal and external validity of the potential outcomes of the project. Despite these threats, this work represents the first effort to understand the impact of time on the observed effectiveness of SBABIs and assess its predictability, which would allow for better planning, implementation and evaluation of SBABIs.

  10. Integrating MBSE into Ongoing Projects: Requirements Validation and Test Planning for the ISS SAFER

    Science.gov (United States)

    Anderson, Herbert A.; Williams, Antony; Pierce, Gregory

    2016-01-01

    The International Space Station (ISS) Simplified Aid for Extra Vehicular Activity (EVA) Rescue (SAFER) is the spacewalking astronaut's final safety measure against separating from the ISS and being unable to return safely. Since the late 1990s, the SAFER has been a standard element of the spacewalking astronaut's equipment. The ISS SAFER project was chartered to develop a new block of SAFER units using a highly similar design to the legacy SAFER (known as the USA SAFER). An on-orbit test module was also included in the project to enable periodic maintenance/propulsion system checkout on the ISS SAFER. On the ISS SAFER project, model-based systems engineering (MBSE) was not the initial systems engineering (SE) approach, given the volume of heritage systems engineering and integration (SE&I) products. The initial emphasis was ensuring traceability to ISS program standards as well as to legacy USA SAFER requirements. The requirements management capabilities of the Cradle systems engineering tool were to be utilized to that end. During development, however, MBSE approaches were applied selectively to address specific challenges in requirements validation and test and verification (T&V) planning, which provided measurable efficiencies to the project. From an MBSE perspective, ISS SAFER development presented a challenge and an opportunity. Addressing the challenge first, the project was tasked to use the original USA SAFER operational and design requirements baseline, with a number of additional ISS program requirements to address evolving certification expectations for systems operating on the ISS. Additionally, a need to redesign the ISS SAFER avionics architecture resulted in a set of changes to the design requirements baseline. Finally, the project added an entirely new functionality for on-orbit maintenance. After initial requirements integration, the system requirements count was approaching 1000, which represented a growth of 4x over the original USA SAFER system

  11. A project in support of Nuclear Technology Cooperation

    International Nuclear Information System (INIS)

    Jung, Ki Jung; Choi, Pyong Hoon; Yi, Ji Ho

    2005-12-01

    Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy informations and computer software developed in the advanced countries. - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate

  12. Managing quality inside a high-technology project organization

    OpenAIRE

    Jokinen, T. (Tauno)

    2004-01-01

    Abstract This action research addresses the deployment of Total Quality Management (TQM) principles in a high-technology new product development organisation. During the period of study, the organisation grew fast. High-technology product development and hypergrowth provided a unique combination of extreme conditions for the study. The existing concepts of TQM are presented as an organised map enabling strategic analysis for an implementation plan. The history of TQM dates back to the ...

  13. Los Alamos National Laboratory Tritium Technology Deployments Large Scale Demonstration and Deployment Project

    International Nuclear Information System (INIS)

    McFee, J.; Blauvelt, D.; Stallings, E.; Willms, S.

    2002-01-01

    This paper describes the organization, planning and initial implementation of a DOE OST program to deploy proven, cost effective technologies into D and D programs throughout the complex. The primary intent is to accelerate closure of the projects thereby saving considerable funds and at the same time being protective of worker health and the environment. Most of the technologies in the ''toolkit'' for this program have been demonstrated at a DOE site as part of a Large Scale Demonstration and Deployment Project (LSDDP). The Mound Tritium D and D LSDDP served as the base program for the technologies being deployed in this project but other LSDDP demonstrated technologies or ready-for-use commercial technologies will also be considered. The project team will evaluate needs provided by site D and D project managers, match technologies against those needs and rank deployments using a criteria listing. After selecting deployments the project will purchase the equipment and provide a deployment engineer to facilitate the technology implementation. Other cost associated with the use of the technology will be borne by the site including operating staff, safety and health reviews etc. A cost and performance report will be prepared following the deployment to document the results

  14. A Proposal to Manage Lessons Learned in Projects: Web 2.0 Technologies to Promote Innovation

    Directory of Open Access Journals (Sweden)

    Marcirio Silveira Chaves

    2014-06-01

    Full Text Available The web 2.0 is transforming the project management in organizations by improving communication and collaboration. The new generation of web-based collaborative tools provides much better experience than the traditional software package allowing document sharing, integrated task tracking, enforcing team processes and agile planning. Despite of the indubitable benefits brought by web 2.0, the use of these technologies to promote knowledge management remains unexplored. For many project managers to obtain and integrate information from different tools of previous similar projects in global organizations remains a challenge. This theoretical paper presents a proposal that suggests an innovation in the knowledge management area applying web 2.0 technologies. The main goal is to provide an integrated vision of a set of technologies that could be used by organizations in order to promote better management of lessons learned. The proposal includes the lessons learned processes (e.g. capture, share and dissemination, the process-based (e.g. project review and after action review and documentation-based (e.g. micro article and learning histories methods. Results show how web 2.0 technologies can help project managers and team project to cope with the main lessons learned processes and methods to learn from experience. Moreover, recommendations are made for the effective use of web 2.0 components promoting innovation and supporting lessons learned management in projects.Keywords: Project management; Lessons learned processes; lessons learned methods; project learning; web 2.0 technologies; innovation.

  15. Guide on Project Web Access of SFR R and D and Technology Monitoring System

    International Nuclear Information System (INIS)

    Lee, Dong Uk; Won, Byung Chool; Lee, Yong Bum; Kim, Young In; Hahn, Do Hee

    2008-09-01

    The SFR R and D and technology monitoring system based on the MS enterprise project management is developed for systematic effective management of 'Development of Basic Key Technologies for Gen IV SFR' project which was performed under the Mid- and Long-term Nuclear R and D Program sponsored by the Ministry of Education, Science and Technology. This system is a tool for project management based on web access. Therefore this manual is a detailed guide for Project Web Access(PWA). Section 1 describes the common guide for using of system functions such as project server 2007 client connection setting, additional outlook function setting etc. The section 2 describes the guide for system administrator. It is described the guide for project management in section 3, 4

  16. Guide on Project Web Access of SFR R and D and Technology Monitoring System

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dong Uk; Won, Byung Chool; Lee, Yong Bum; Kim, Young In; Hahn, Do Hee

    2008-09-15

    The SFR R and D and technology monitoring system based on the MS enterprise project management is developed for systematic effective management of 'Development of Basic Key Technologies for Gen IV SFR' project which was performed under the Mid- and Long-term Nuclear R and D Program sponsored by the Ministry of Education, Science and Technology. This system is a tool for project management based on web access. Therefore this manual is a detailed guide for Project Web Access(PWA). Section 1 describes the common guide for using of system functions such as project server 2007 client connection setting, additional outlook function setting etc. The section 2 describes the guide for system administrator. It is described the guide for project management in section 3, 4.

  17. Voices Project: Technological Innovations in Social Inclusion of People with Visual Impairment

    Directory of Open Access Journals (Sweden)

    Janaina Cazini

    2013-04-01

    Full Text Available This article aims to analyze how technological innovations are contributing to inclusion of people with disabilities in society and at work, from the study of social innovations, assistive technology and digital inclusion presented in a case study on the Voices Project. The project, developed in partnership with the Association of Parents and Friends of the Blind and the Federal Technological University of Paraná, in the years 2008/2009, made a computer course for people with visual impairments. The theoretical survey and project data confirmed that social innovations really are essential tools for digital inclusion of people with disabilities contributing thus to their inclusion in the workplace.

  18. Evaluation of Representative Smart Grid Investment Grant Project Technologies: Distributed Generation

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Ruchi; Vyakaranam, Bharat GNVSR

    2012-02-14

    This document is one of a series of reports estimating the benefits of deploying technologies similar to those implemented on the Smart Grid Investment Grant (SGIG) projects. Four technical reports cover the various types of technologies deployed in the SGIG projects, distribution automation, demand response, energy storage, and renewables integration. A fifth report in the series examines the benefits of deploying these technologies on a national level. This technical report examines the impacts of addition of renewable resources- solar and wind in the distribution system as deployed in the SGIG projects.

  19. [Care with the child's health and validation of an educational technology for riverside families].

    Science.gov (United States)

    Teixeira, Elizabeth; de Almeida Siqueira, Aldo; da Silva, Joselice Pereira; Lavor, Lília Cunha

    2011-01-01

    This study aimed to assess the knowledge and ways of caring for the child health 0-5 years between riverine (Phase 1), and to validate an educational technology (Phase 2). It was carried out a descriptive qualitative study. With the mothers, focus groups and content analysis were used, and with judges-specialists and target-public-applied, forms. The study revealed that the concern with the care of a child between the riverine families permeates the adversity daily, with dedication and commitment of these families in maintaining the health of their children. The sensitivity listening of mothers indicated the need for a closer relationship between nursing professionals and family. The validation of the educational technology was convergent, within the parameters considered adequate.

  20. THE PERIGEO PROJECT: INERTIAL AND IMAGING SENSORS PROCESSING, INTEGRATION AND VALIDATION ON UAV PLATFORMS FOR SPACE NAVIGATION

    Directory of Open Access Journals (Sweden)

    P. Molina

    2014-03-01

    Full Text Available The PERIGEO R&D project aims at developing, testing and validating algorithms and/or methods for space missions in various field of research. This paper focuses in one of the scenarios considered in PERIGEO: navigation for atmospheric flights. Space missions heavily rely on navigation to reach success, and autonomy of on-board navigation systems and sensors is desired to reach new frontiers of space exploration. From the technology side, optical frame cameras, LiDAR and inertial technologies are selected to cover the requirements of such missions. From the processing side, image processing techniques are developed for vision-based relative and absolute navigation, based on point extraction and matching from camera images, and crater detection and matching in camera and LiDAR images. The current paper addresses the challenges of space navigation, presents the current developments and preliminary results, and describes payload elements to be integrated in an Unmanned Aerial Vehicle (UAV for in-flight testing of systems and algorithms. Again, UAVs are key enablers of scientific capabilities, in this case, to bridge the gap between laboratory simulation and expensive, real space missions.

  1. Validation of innovative technologies and strategies for regulatory safety assessment methods: challenges and opportunities.

    Science.gov (United States)

    Stokes, William S; Wind, Marilyn

    2010-01-01

    Advances in science and innovative technologies are providing new opportunities to develop test methods and strategies that may improve safety assessments and reduce animal use for safety testing. These include high throughput screening and other approaches that can rapidly measure or predict various molecular, genetic, and cellular perturbations caused by test substances. Integrated testing and decision strategies that consider multiple types of information and data are also being developed. Prior to their use for regulatory decision-making, new methods and strategies must undergo appropriate validation studies to determine the extent that their use can provide equivalent or improved protection compared to existing methods and to determine the extent that reproducible results can be obtained in different laboratories. Comprehensive and optimal validation study designs are expected to expedite the validation and regulatory acceptance of new test methods and strategies that will support improved safety assessments and reduced animal use for regulatory testing.

  2. Validation of the Technological Process of the Preparation "Milk by Vidal".

    Science.gov (United States)

    Savchenko, L P; Mishchenko, V A; Georgiyants, V A

    2017-01-01

    Validation was performed on the technological process of the compounded preparation "Milk by Vidal" in accordance with the requirements of the regulatory framework of Ukraine. Critical stages of formulation which can affect the quality of the finished preparation were considered during the research. The obtained results indicated that the quality of the finished preparation met the requirements of the State Pharmacopoeia of Ukraine. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

  3. Radiation technology for sewage sludge treatment: The Argentine project

    International Nuclear Information System (INIS)

    Graino, J.G.

    2001-01-01

    Within the environmental applications of ionizing radiation, disinfection of wastewaters or sewage sludges is one of the most best known. Argentina based the project of a full scale irradiation plant on the gamma irradiation application, utilizing Argentine made Cobalt-60 sources. The design characteristics, process descriptions and costs are included. The research project developed information about the irradiation effects on the sludges with respect to plant performance. For the purpose of oxi-irradiation experiments, a lab-scale pool irradiator was constructed and is described. (author)

  4. Health workforce needs: projections complicated by practice and technology changes.

    Science.gov (United States)

    Cunningham, Rob

    2013-10-22

    As population growth and the aging of the overall population increase demand for health care, policymakers and analysts posit whether sufficient health care providers will be able to meet that demand. Some argue there are too few providers already; others say our current supply-demand problems lie with efficiency. But suppose both are correct? Perhaps the real challenge is to understand how physician practices are changing in response to market forces such as payment changes, provider distributions, and technology innovations. This issue brief reviews what is known about evolving practice organizations, professional mixes, information technology support, and the implications of these and other factors for public workforce policies.

  5. PROJECT W-551 INTERIM PRETREATMENT SYSTEM PRECONCEPTUAL CANDIDATE TECHNOLOGY DESCRIPTIONS

    Energy Technology Data Exchange (ETDEWEB)

    MAY TH

    2008-08-12

    The Office of River Protection (ORP) has authorized a study to recommend and select options for interim pretreatment of tank waste and support Waste Treatment Plant (WTP) low activity waste (LAW) operations prior to startup of all the WTP facilities. The Interim Pretreatment System (IPS) is to be a moderately sized system which separates entrained solids and 137Cs from tank waste for an interim time period while WTP high level waste vitrification and pretreatment facilities are completed. This study's objective is to prepare pre-conceptual technology descriptions that expand the technical detail for selected solid and cesium separation technologies. This revision includes information on additional feed tanks.

  6. A project in support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Ki Jung; Choi, Pyong Hoon; Yi, Ji Ho (and others)

    2005-12-15

    Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy informations and computer software developed in the advanced countries. - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate.

  7. Status of the JET project and its supporting technological programme

    International Nuclear Information System (INIS)

    Bertolini, E.

    1976-01-01

    A brief review of the overall design of the JET facility is given. Particular JET components described include the vacuum system, toroidal field coils, poloidal system, power supplies, control and data acquisition, and status of the project towards the construction phase

  8. Improving Technological Competency in Nursing Students: The Passport Project

    Directory of Open Access Journals (Sweden)

    Julie Edwards

    2011-07-01

    Full Text Available Integration of informatics competency into a nursing curriculum is important to ensure success throughout the education and career of contemporary nursing students. As enrollment in nursing programs increases, the diverse population of students from many different cultural and socioeconomic backgrounds presents a challenge for faculty in addressing unique learning needs. Competency in informatics will allow the beginning nursing student to navigate the on-line teaching software used by colleges. With rigorous expectations in nursing programs, students may feel overwhelmed with assignments, organization, and time management. Frustration may build when students struggle with basic informatics competency, often leaving them unable to navigate instructional websites or work with necessary on-line learning content. The purpose of this project, Passport Project for Nursing Success, was to assess the skills, knowledge, and informatics comfort level of students, while providing computer training and teaching for beginning nursing students in an undergraduate nursing program in Central Illinois. The community college encompassed students from a ten county area, with 20 percent of the student population enrolled in the Applied Science curriculum. Initial implementation occurred prior to the students' first nursing course and emphasized basic skills necessary to navigate on-line learning software, library search engines, and electronic communication. The greatest barrier to successful implementation was faculty resistance and academic support during completion of the initial implementation of the Passport Project. Post- project surveys indicated overwhelming student support for the education received and improved retention rates of first semester nursing students.

  9. Hacking events. Project development practices and technology use at hackathons

    NARCIS (Netherlands)

    Richterich, Annika

    2017-01-01

    Hackathons are techno-creative events during which participants get together in a physical location. They may be hosted by civic communities, corporations or public institutions. Working individually or in teams, usually for several days, participants develop projects such as hardware or software

  10. Operation algorithm of the information system of improving organizational and technological reliability of construction projects using energy efficient technologies

    Directory of Open Access Journals (Sweden)

    Ginzburg Aleksandr Vital’evich

    2016-10-01

    Full Text Available The main source for the development of construction projects with energy-efficient technologies in use is investments. The traditional approaches of risk management: insurance, diversification and redundancy only raise the cost of the construction project, which has a negative impact on the investor’s decision to invest. In order to solve this problem an information system has been developed, which is based on the principle of insightful analysis of the potential “pure” risks and a list of recommendations of risk management. This tool allows identifying all the weaknesses of a construction project, improving the organizational and technological reliability, and imparting an understanding to the investor / a customer of the resources required for the project implementation.

  11. Automotive technology status and projections. Volume 2: Assessment report

    Science.gov (United States)

    Dowdy, M.; Burke, A.; Schneider, H.; Edmiston, W.; Klose, G. J.; Heft, R.

    1978-01-01

    Current and advanced conventional engines, advanced alternative engines, advanced power train components, and other energy conserving automobile modifications which could be implemented by the end of this century are examined. Topics covered include gas turbine engines, Stirling engines, advanced automatic transmissions, alternative fuels, and metal and ceramic technology. Critical problems are examined and areas for future research are indicated.

  12. OC5 Project Phase Ib: Validation of Hydrodynamic Loading on a Fixed, Flexible Cylinder for Offshore Wind Applications

    DEFF Research Database (Denmark)

    Robertson, Amy N.; Wendt, Fabian; Jonkman, Jason M.

    2016-01-01

    This paper summarizes the findings from Phase Ib of the Offshore Code Comparison, Collaboration, Continued with Correlation (OC5) project. OC5 is a project run under the International Energy Agency (IEA) Wind Research Task 30, and is focused on validating the tools used for modelling offshore win...

  13. OC5 Project Phase II: Validation of Global Loads of the DeepCwind Floating Semisubmersible Wind Turbine

    DEFF Research Database (Denmark)

    Robertson, Amy N.; Wendt, Fabian; Jonkman, Jason M.

    2017-01-01

    This paper summarizes the findings from Phase II of the Offshore Code Comparison, Collaboration, Continued, with Correlation project. The project is run under the International Energy Agency Wind Research Task 30, and is focused on validating the tools used for modeling offshore wind systems thro...

  14. Phase Change Permeation Technology for Environmental Control & Life Support Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This project will explore a recent advancement in Phase Change Permeation™ technology to enable improved (1) water recovery from urine/brine for Environmental...

  15. 76 FR 56406 - Science and Technology Reinvention Laboratory Demonstration Project; Department of the Army; Army...

    Science.gov (United States)

    2011-09-13

    ... DEPARTMENT OF DEFENSE Office of the Secretary Science and Technology Reinvention Laboratory Demonstration Project; Department of the Army; Army Research, Development and Engineering Command; Tank... Berry, U. S. Army Tank Automotive Research, Development and Engineering Center (TARDEC), 6501 East 11...

  16. R and D projects in reactor technology at the Swedish Plant Inspectorate (SA)

    International Nuclear Information System (INIS)

    Dahlberg, L.; Brickstad, B.

    1990-01-01

    This presentation is a list of R and D projects descriptions in mechanics of materials and structures, non-destructive testing and materials and weld technology carried out by the Swedish Nuclear Inspectorate

  17. Electric vehicle charging technologies analysis and standards : final research project report.

    Science.gov (United States)

    2017-02-01

    This project has evaluated the technologies and standards associated with Electric : Vehicle Service Equipment (EVSE) and the related infrastructure, and the major cost : issue related to electric vehicle (EV) charging -- the cost of utility power. T...

  18. Report: EPA Needs to Improve Oversight of Its Information Technology Projects

    Science.gov (United States)

    Report #2005-P-00023, September 14, 2005. EPA’s Office of Environmental Information (OEI) did not sufficiently oversee information technology projects to ensure they met planned budgets and schedules.

  19. An Interview with Roxie Ahlbrecht about Writing, Technology, and the "Apple Bytes" Project.

    Science.gov (United States)

    Dalton, Bridget, Ed.; Strangman, Nicole, Ed.

    2002-01-01

    Presents an interview with Roxie Ahlbrecht, a second-grade teacher at Robert Frost Elementary School in Sioux Falls, South Dakota. Discusses technology and writing. Details how Internet projects support literacy. (PM)

  20. The deployment of projects of hydrogen-related innovative technologies in Japan and some topics in the project

    International Nuclear Information System (INIS)

    Sakata, K.; Mizutani, E.; Fukuda, K.

    2004-01-01

    The deployment of innovative technologies, which have the potentiality to make breakthroughs in the future but have been kept remained at early stages of development because of their uncertain technological values, is important in the course of introduction and dissemination of hydrogen energy into our society. In Japan, in the consecutive projects of 'World Energy Network' (WE-NET) and 'Development of Safe Utilization Technology and an Infrastructure for Hydrogen Use', both supported by New Energy and Industrial Technology Development Organization (NEDO), significant results have been achieved in the project of 'Research on Innovative Technologies'. The framework and characteristics of this project are outlined with several research topics. In the exploratory research on the alternative catalytic materials to Platinum group metals for fuel cells and hydrogen production, a series of Tantalum oxynitrides were found potentially applicable as new electrodes catalysts the development of magnetic refrigeration of hydrogen is under way with the finding of materials with feasible properties; in search of innovative hydrogen storage systems, a new process of decalin dehydrogenation / naphthalene hydrogenation based on superheated liquid-film-type catalysis was developed. (author)

  1. Validation of tissue microarray technology in squamous cell carcinoma of the esophagus.

    Science.gov (United States)

    Boone, Judith; van Hillegersberg, Richard; van Diest, Paul J; Offerhaus, G Johan A; Rinkes, Inne H M Borel; Kate, Fiebo J W Ten

    2008-05-01

    Tissue microarray (TMA) technology has been developed to facilitate high-throughput immunohistochemical and in situ hybridization analysis of tissues by inserting small tissue biopsy cores into a single paraffin block. Several studies have revealed novel prognostic biomarkers in esophageal squamous cell carcinoma (ESCC) by means of TMA technology, although this technique has not yet been validated for these tumors. Because representativeness of the donor tissue cores may be a disadvantage compared to full sections, the aim of this study was to assess if TMA technology provides representative immunohistochemical results in ESCC. A TMA was constructed containing triplicate cores of 108 formalin-fixed, paraffin-embedded squamous cell carcinomas of the esophagus. The agreement in the differentiation grade and immunohistochemical staining scores of CK5/6, CK14, E-cadherin, Ki-67, and p53 between TMA cores and a subset of 64 randomly selected donor paraffin blocks was determined using kappa statistics. The concurrence between TMA cores and donor blocks was moderate for Ki-67 (kappa = 0.42) and E-cadherin (kappa = 0.47), substantial for differentiation grade (kappa = 0.65) and CK14 (kappa = 0.71), and almost perfect for p53 (kappa = 0.86) and CK5/6 (kappa = 0.93). TMA technology appears to be a valid method for immunohistochemical analysis of molecular markers in ESCC provided that the staining pattern in the tumor is homogeneous.

  2. Analysis: including visually impaired participants in validation design studies of diabetes technology.

    Science.gov (United States)

    Uslan, Mark; Blubaugh, Morgan

    2010-09-01

    In an article in this issue of Journal of Diabetes Science and Technology, Sherwyn Schwartz, M.D., presents a study to validate the design of the ClikSTAR® insulin pen from sanofi-aventis and demonstrates that the device can be used correctly by participants with diabetes. Concern with this article lies with the selection of participants, which was meant to reflect the intended audience for the insulin pen device but does not address the inclusion of visually impaired individuals, who comprise over 20% of the adult diabetes population. Visually impaired individuals need to be included as part of the intended audience for insulin administration technology, and manufacturers of these devices need to design their products for safe use by all people, including those who are visually impaired. The study demonstrated successful use of the ClikSTAR insulin pen in a population that did not include subjects with severe visual impairment. We believe that future validation studies for insulin administration technology should also include samples of visually impaired users and that visually impaired patients will embrace the use of insulin pens designed with their needs in mind. © 2010 Diabetes Technology Society.

  3. Managing collaboration across boundaries in health information technology projects.

    Science.gov (United States)

    Garrety, Karin; Dalley, Andrew; McLoughlin, Ian; Wilson, Rob; Yu, Ping

    2012-01-01

    One reason that it is so difficult to build electronic systems for collecting and sharing health information is that their design and implementation requires clear goals and a great deal of collaboration among people from diverse social and occupational worlds. This paper uses empirical examples from two Australian health informatics projects to illustrate the importance of boundary objects and boundary spanning activities in facilitating the high degree of collaboration required for the design and implementation of workable systems.

  4. Ceramic Technology Project database: September 1993 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1994-01-01

    Data presented in this report represent an intense effort to improve processing methods, testing methods, and general mechanical properties of candidate ceramics for use in advanced heat engines. Materials discussed include GN-10, GS-44, GTE PY6, NT-154, NT-164, sintered-reaction-bonded silicon nitrides, silicon nitride combined with rare-earth oxides, NT-230, Hexoloy SX-G1, Dow Corning`s {beta}-Si{sub 3}N{sub 4}, and a few whisker-reinforced ceramic composites. Information in this report was taken from the project`s semiannual and bimonthly progress reports and from final reports summarizing the results of individual studies. Test results are presented in tabular form and in graphs. All data, including test rig descriptions and material characterizations, are stored in the CTP database and are available to all project participants on request. Objective of this report is to make available the test results from these studies but not to draw conclusions from those data.

  5. Tehachapi Wind Energy Storage Project - Technology Performance Report #3

    Energy Technology Data Exchange (ETDEWEB)

    Pinsky, Naum [Southern California Edison, Rosemead, CA (United States); O' Neill, Lori [Southern California Edison, Rosemead, CA (United States)

    2017-03-31

    The TSP is located at SCE’s Monolith Substation in Tehachapi, California. The 8 MW, 4 hours (32 MWh) BESS is housed in a 6,300 square foot facility and 2 x 4 MW/4.5 MVA smart inverters are on a concrete pad adjacent to the BESS facility. The project will evaluate the capabilities of the BESS to improve grid performance and assist in the integration of large-scale intermittent generation, e.g., wind. Project performance was measured by 13 specific operational uses: providing voltage support and grid stabilization, decreasing transmission losses, diminishing congestion, increasing system reliability, deferring transmission investment, optimizing renewable-related transmission, providing system capacity and resources adequacy, integrating renewable energy (smoothing), shifting wind generation output, frequency regulation, spin/non-spin replacement reserves, ramp management, and energy price arbitrage. Most of the operations either shift other generation resources to meet peak load and other electricity system needs with stored electricity, or resolve grid stability and capacity concerns that result from the interconnection of intermittent generation. SCE also demonstrated the ability of lithium ion battery storage to provide nearly instantaneous maximum capacity for supply-side ramp rate control to minimize the need for fossil fuel-powered back-up generation. The project began in October, 2010 and will continue through December, 2016.

  6. A Project in Support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Deok Ku; Kim, Kyoung Pyo; Ko, Young Chel (and others)

    2006-12-15

    Establish strategies of international cooperation in an effect to promote our nation's leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. Using the INIS output data, it has provided domestic users with searching. Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing.

  7. Health technology assessment of medical devices: What is different? An overview of three European projects.

    Science.gov (United States)

    Schnell-Inderst, Petra; Mayer, Julia; Lauterberg, Jörg; Hunger, Theresa; Arvandi, Marjan; Conrads-Frank, Annette; Nachtnebel, Anna; Wild, Claudia; Siebert, Uwe

    2015-01-01

    With the growing use and importance of health technology assessment (HTA) in decision making during recent years, health technology assessors, decision makers and stakeholders are confronted with methodological challenges due to specific characteristics of health technologies (e. g., pharmaceuticals, diagnostic tests, screening programs), their developmental environment, and their regulation process. Being aware of the necessity to use HTA as a policy instrument for sustainable health care systems in a regulatory environment of decentralized Conformité Européenne (CE) marking, the European Union (EU) is increasingly supporting the development of methods for the assessment of medical devices (MD) on different levels: within the scope of European research projects and within joint assessment activities of the member states of the European network for Health Technology Assessment (EUnetHTA). First, this article describes three projects: MedtecHTA-Methods for Health Technology Assessment of Medical Devices, a European Perspective Work Package 3 (WP3), Comparative Effectiveness of Medical Devices led by the University for Health Sciences, Medical Informatics and Technology (UMIT). Second, we discuss the experiences of the Ludwig Boltzmann Institute Health Technology Assessment (LBI HTA) with the joint production of rapid assessments of medical devices by several European HTA agencies within EUnetHTA. Third, a brief outline is given of the framework of joint methodological guideline elaboration by the EUnetHTA partner organizations because a guideline for therapeutic MD is also being developed here. We will describe aims, methods and some preliminary results of MedtecHTA and EUnetHTA Joint Action 2 Work Package 5 Strand B (WP5B) applying the HTA Core Model for Rapid Assessment for national adaptation and reporting, and give an overview of the development process of methodological guidelines within WP 7 of EUnetHTA Joint Action 2. Based on a literature review in Medtec

  8. Tension Awareness of Stakeholders in Large Technology Projects : A Duality Perspective

    NARCIS (Netherlands)

    Boonstra, Albert; van Offenbeek, Marjolein; Vos, Janita F.J.

    2017-01-01

    This article analyzes the tensions evolving from project management dilemmas and how they relate to stakeholders in large technology projects. The study addresses an organization-wide electronic health record implementation in a large hospital. It adopts a duality lens in exploring whether and how

  9. Becoming Little Scientists: Technologically-Enhanced Project-Based Language Learning

    Science.gov (United States)

    Dooly, Melinda; Sadler, Randall

    2016-01-01

    This article outlines research into innovative language teaching practices that make optimal use of technology and Computer-Mediated Communication (CMC) for an integrated approach to Project-Based Learning. It is based on data compiled during a 10- week language project that employed videoconferencing and "machinima" (short video clips…

  10. Profiting from empowerment? Investigating dissemination avenues for educational technology content within an emerging market solutions project

    NARCIS (Netherlands)

    P.A. Arora (Payal)

    2005-01-01

    textabstractABSTRACT: The Stills in Sync (SIS) project is a joint initiative of the nonprofit organization PlanetRead and the global information and communication technology (ICT) company Hewlett Packard (HP). The SIS project entails creating a multimedia product designed to enhance literacy in

  11. Environmental Technology (Laboratory Analysis and Environmental Sampling) Curriculum Development Project. Final Report.

    Science.gov (United States)

    Hinojosa, Oscar V.; Guillen, Alfonso

    A project assessed the need and developed a curriculum for environmental technology (laboratory analysis and environmental sampling) in the emerging high technology centered around environmental safety and health in Texas. Initial data were collected through interviews by telephone and in person and through onsite visits. Additional data was…

  12. Impact of government and corporate strategy on the performance of technology projects in road construction

    NARCIS (Netherlands)

    Caerteling, Jasper; Halman, Johannes I.M.; Song, Michael; Song, Michael; Doree, Andries G.

    2009-01-01

    In this study, we focus on road construction and analyze technology development projects. Based on the business strategy literature and literature on technology policy, we test the relative importance of a firm's strategies and government as a buyer and champion. Our empirical findings stress the

  13. What's new with nurseries and reforestation projects at the Missoula Technology and Development Center?

    Science.gov (United States)

    Bob Simonson

    2011-01-01

    The USDA Forest Service Missoula Technology and Development Center (MTDC) offers technical expertise, technology transfer, and new equipment development to federal, state, and private forest nurseries. Current and recently completed projects at MTDC include a front and mid-mount tractor evaluation, ATV-pulled mechanical tree planter, greenhouse snow remover, freeze...

  14. Project A+ Elementary Technology Demonstration Schools 1990-91. The First Year.

    Science.gov (United States)

    Marable, Paula; Frazer, Linda

    Project A+ Elementary Technology Demonstration Schools is a program made possible through grants from IBM (International Business Machines Corporation) and Apple, Inc. The primary purpose of the program is to demonstrate the educational effectiveness of technology in accelerating the learning of low achieving at-risk students and enhancing the…

  15. What's New With Nurseries and Reforestation Projects at the Missoula Technology and Development Center

    Science.gov (United States)

    Brian Vachowski

    2006-01-01

    The USDA Forest Service Missoula Technology and Development Center (MTDC) offers technical expertise, technology transfer, and new equipment development to Federal, State, and private forest nurseries. Current and recently completed projects at MTDC include a nursery soil moisture meter, remote data collection systems, low cost weather stations, electronic soil...

  16. Exploring the Effects of Technology Overload on the Outcomes of Enterprise Resource Planning (ERP) Implementation Projects

    Science.gov (United States)

    Kates, Earl B.

    2016-01-01

    Despite significant investments made by organizations to implement ERP systems and prior research that explored contributing factors of ERP failure, the ERP implementation success rate continues to remain low in practice. Increased technology usage in the workplace coupled with higher dependency on technology to complete project tasks often leads…

  17. PROJECT W-551 INTERIM PRETREATMENT SYSTEM TECHNOLOGY SELECTION SUMMARY DECISION REPORT AND RECOMMENDATION

    Energy Technology Data Exchange (ETDEWEB)

    CONRAD EA

    2008-08-12

    This report provides the conclusions of the tank farm interim pretreatment technology decision process. It documents the methodology, data, and results of the selection of cross-flow filtration and ion exchange technologies for implementation in project W-551, Interim Pretreatment System. This selection resulted from the evaluation of specific scope criteria using quantitative and qualitative analyses, group workshops, and technical expert personnel.

  18. PROJECT W-551 INTERIM PRETREATMENT SYSTEM TECHNOLOGY SELECTION SUMMARY DECISION REPORT AND RECOMMENDATION

    International Nuclear Information System (INIS)

    CONRAD EA

    2008-01-01

    This report provides the conclusions of the tank farm interim pretreatment technology decision process. It documents the methodology, data, and results of the selection of cross-flow filtration and ion exchange technologies for implementation in project W-551, Interim Pretreatment System. This selection resulted from the evaluation of specific scope criteria using quantitative and qualitative analyses, group workshops, and technical expert personnel

  19. CO2 CAPTURE PROJECT - AN INTEGRATED, COLLABORATIVE TECHNOLOGY DEVELOPMENT PROJECT FOR NEXT GENERATION CO2 SEPARATION, CAPTURE AND GEOLOGIC SEQUESTRATION

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Helen Kerr

    2003-08-01

    The CO{sub 2} Capture Project (CCP) is a joint industry project, funded by eight energy companies (BP, ChevronTexaco, EnCana, Eni, Norsk Hydro, Shell, Statoil, and Suncor) and three government agencies (1) European Union (DG Res & DG Tren), (2) Norway (Klimatek) and (3) the U.S.A. (Department of Energy). The project objective is to develop new technologies, which could reduce the cost of CO{sub 2} capture and geologic storage by 50% for retrofit to existing plants and 75% for new-build plants. Technologies are to be developed to ''proof of concept'' stage by the end of 2003. The project budget is approximately $24 million over 3 years and the work program is divided into eight major activity areas: (1) Baseline Design and Cost Estimation--defined the uncontrolled emissions from each facility and estimate the cost of abatement in $/tonne CO{sub 2}. (2) Capture Technology, Post Combustion: technologies, which can remove CO{sub 2} from exhaust gases after combustion. (3) Capture Technology, Oxyfuel: where oxygen is separated from the air and then burned with hydrocarbons to produce an exhaust with high CO{sub 2} for storage. (4) Capture Technology, Pre -Combustion: in which, natural gas and petroleum coke are converted to hydrogen and CO{sub 2} in a reformer/gasifier. (5) Common Economic Model/Technology Screening: analysis and evaluation of each technology applied to the scenarios to provide meaningful and consistent comparison. (6) New Technology Cost Estimation: on a consistent basis with the baseline above, to demonstrate cost reductions. (7) Geologic Storage, Monitoring and Verification (SMV): providing assurance that CO{sub 2} can be safely stored in geologic formations over the long term. (8) Non-Technical: project management, communication of results and a review of current policies and incentives governing CO{sub 2} capture and storage. Technology development work dominated the past six months of the project. Numerous studies are making

  20. The relationship between systems development methodologies and Information Technology project success / Maphisa Shirley Nkone

    OpenAIRE

    Nkone, Maphisa Shirley

    2013-01-01

    The purpose of this study was to investigate the relationship between systems development methodologies (SDMs) and the success of Information Technology (IT) projects. The study also seeks to find other critical success factors (CSFs) that influence IT projects success. What initiated this study, with reference to the literature review, is the apparent general view that IT project deliveries are still late, over budget, and unpredictable (Chow & Cao, 2008:961; The Standish Group, 2004). To...

  1. Diagnostic framework and health check tool for engineering and technology projects

    Directory of Open Access Journals (Sweden)

    Simon P Philbin

    2014-10-01

    Full Text Available Purpose: Development of a practitioner oriented diagnostic framework and health check tool to support the robust assessment of engineering and technology projects.Design/methodology/approach: The research is based on a literature review that draws together insights on project assessment and critical success factors to establish an integrated systems view of projects. This is extended to allow a comprehensive diagnostic framework to be developed along with a high-level health check tool that can be readily deployed on projects. The utility of the diagnostic framework and health check tool are explored through three illustrative case studies, with two from Canada and one from the United Kingdom. Findings andOriginality/value: The performance of engineering and technology projects can be viewed through a systems perspective and being a function of six sub-systems that are: process, technology, resources, impact, knowledge and culture. The diagnostic framework that is developed through this research integrates these sub-systems to provide a comprehensive assessment methodology for projects, which is linked to existing best practice for project reviews, performance management and maturity models. The case studies provide managerial insights that are related to the diagnostic framework but crucially also position the approach in the context of industrial applications for construction engineering and technology management.Research limitations/implications: The case study approach includes two case studies from the construction and facilities development sector with the third case study from the research and technology sector. Further work is required to investigate the use of the diagnostic framework and health check tool in other sectors.Practical implications: The health check tool will be of practical benefit to new projects managers that require access to a robust and convenient project review methodology for assessing the status and health of a

  2. Real Time Technology Application Demonstration Project Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Volpe, John [Univ of KY, Center for Applied Energy Research, Kentucky Research Consortium for Energy and Environment; Hampson, Steve [Univ of KY, Center for Applied Energy Research, Kentucky Research Consortium for Energy and Environment; Johnson, Robert L [Argonne National Lab, Environmental Science Div.

    2008-09-01

    The work and results described in this final report pertain to the demonstration of real-time characterization technologies applied to potentially contaminated surface soils in and around Area of Concern (AOC) 492 at the Paducah Gaseous Diffusion Plant (PGDP). The work was conducted under the auspices of Kentucky Research Consortium for Energy and Environment (KRCEE). KRCEE was created to support the Department of Energy's (DOE) efforts to complete the expeditious and economically viable environmental restoration of the Paducah Gaseous Diffusion Plant (PGDP), the Western Kentucky Wildlife Management Area (WKWMA), and surrounding areas.

  3. Aviation Safety Program Atmospheric Environment Safety Technologies (AEST) Project

    Science.gov (United States)

    Colantonio, Ron

    2011-01-01

    Engine Icing: Characterization and Simulation Capability: Develop knowledge bases, analysis methods, and simulation tools needed to address the problem of engine icing; in particular, ice-crystal icing Airframe Icing Simulation and Engineering Tool Capability: Develop and demonstrate 3-D capability to simulate and model airframe ice accretion and related aerodynamic performance degradation for current and future aircraft configurations in an expanded icing environment that includes freezing drizzle/rain Atmospheric Hazard Sensing and Mitigation Technology Capability: Improve and expand remote sensing and mitigation of hazardous atmospheric environments and phenomena

  4. LNG - Status in Denmark. Technology and potential. Project report

    Energy Technology Data Exchange (ETDEWEB)

    Naeslund, M.

    2012-05-15

    The interest for LNG both on a small and a large scale is increasing worldwide. The experiences and knowledge on LNG is limited in Denmark. The Danish gas companies' Technical Management Group (TCG) has asked for a status report including a technology description and an evaluation of the potential in Denmark. A survey of primarily small-scale LNG technology is done in the report. The focus is motivated by the new areas of gas utilisation that become possible with small-scale LNG. Small-scale LNG in this study is defined as LNG stored and used at the application or in an isolated gas grid. The small-scale use of LNG has today an almost negligible share of the total LNG trade but offers interesting new applications for gas utilisation. LNG on a small scale can be used primarily as: 1) Ship fuel. 2) Truck fuel (heavy duty long distance). 3) Individual users not connected to the natural gas grid. 4) Backup for upgraded biogas to individual users and vehicle fleets. 5) Security of supply or supply enhancement of heavily loaded parts of the gas grid. 6) Small-scale storage and/or peak shaving. All but the first topics are natural uses for the current Danish gas distributors. LNG as ship fuel may engage other specialized LNG companies. The report contains a technical description of the parts in primarily small-scale LNG handling and operation. Liquefaction, transport, storage, engine technologies, gas quality and safety aspects related to LNG are covered. There seem to be two more or less separate paths for LNG in Denmark, onshore and off-shore use. These are not, apparently, sharing their experiences and knowledge. Rules and regulations are also different which may create some problems in the interface, for example ship bunkering. Further studies are suggested in the area of gas quality and engine technologies and adaptation of foreign guidelines for small-scale installations to Danish conditions. These guidelines ought to be based on international standards and

  5. New technology for interactive CAL: the Origami project

    Directory of Open Access Journals (Sweden)

    Robert Harding

    1997-12-01

    Full Text Available For many years, almost since the dawn of computing, people have speculated about the paperless society. Each new technology is heralded as the one that will finally take us to the fully electronic Utopia. However, the use of computers as document preparation tools has actually increased the number of paper documents. The latest mass-market development, the Internet, is unlikely to buck this trend even though the tools used seem to encourage on-screen browsing. The problems inherent with screen presentation have not gone away, while the amount of information available to the average computer user is increasing all the time.

  6. Requirements for effective technology transfer for engineering and project management. The views of the recipient country and the technology supplier

    International Nuclear Information System (INIS)

    Backhaus, K.W.

    1986-04-01

    Technology transfer in the area of engineering and project management for nuclear power plant projects is considered a rather complex and sophisticated matter. Therefore only within a long-term nuclear co-operation a meaningful transfer of such a multifaceted technology can reasonably be achieved. A long-term nuclear co-operation anticipates a nuclear power plant program consisting of a few nuclear power plants of a certain type and size in order to achieve the indispensable effect ''learning by doing''. The objectives of nuclear technology transfer may be in general or in particular; absorption of a foreign nuclear technology and its adaptation to the conditions and needs of the receiver's country; built-up of industrial infrastructure for planning, construction and operation of nuclear power plants; raising of the general industrial level and achieve a spin-off effect; creation of a basis for independent development of nuclear technology. The technology transfer on one side and the construction program of nuclear power plants on the other side cannot be practiced by two parallel but separated event, however, they form one unit. Contrary to the import of industrial equipment in terms of ''black box'', by means of a nuclear technology transfer the introduction of new dependencies will be prevented. The technology transfer can remarkably be facilitated by forming a joint venture engineering company in the recipient country. The required know-how potential within a certain time period determines the intensity of the technology transfer and consequently the man power to be involved. The realization of such technology transfer is demonstrated by means of practical examples. (author). 12 figs

  7. Development, reliability, and validity of the Alberta Perinatal Stroke Project Parental Outcome Measure.

    Science.gov (United States)

    Bemister, Taryn B; Brooks, Brian L; Kirton, Adam

    2014-07-01

    Perinatal stroke is a leading cause of cerebral palsy and lifelong disability, although parent and family outcomes have not yet been studied in this specific population. The Alberta Perinatal Stroke Project Parental Outcome Measure was developed as a 26-item questionnaire on the impact of perinatal stroke on parents and families. The items were derived from expert opinion and scientific literature on issues salient to parents of children with perinatal stroke, including guilt and blame, which are not well captured in existing measures of family impact. Data were collected from 82 mothers and 28 fathers who completed the Parental Outcome Measure and related questionnaires (mean age, 39.5 years; mean child age, 7.4 years). Analyses examined the Parental Outcome Measure's internal consistency, test-retest reliability, validity, and factor structure. The Parental Outcome Measure demonstrated three unique theoretical constructs: Psychosocial Impact, Guilt, and Blame. The Parental Outcome Measure has excellent internal consistency (Cronbach α = 0.91) and very good test-retest reliability more than 2-5 weeks (r = 0.87). Regarding validity, the Parental Outcome Measure is sensitive to condition severity, accounts for additional variance in parent outcomes, and strongly correlates with measures of anxiety, depression, stress, quality of life, family functioning, and parent adjustment. The Parental Outcome Measure contributes to the literature as the first brief measure of family impact designed for parents of children with perinatal stroke. Copyright © 2014 Elsevier Inc. All rights reserved.

  8. Validation of the European Cyberbullying Intervention Project Questionnaire for Colombian Adolescents.

    Science.gov (United States)

    Herrera-López, Mauricio; Casas, José A; Romera, Eva M; Ortega-Ruiz, Rosario; Del Rey, Rosario

    2017-02-01

    Cyberbullying is the act of using unjustified aggression to harm or harass via digital devices. Currently regarded as a widespread problem, the phenomenon has attracted growing research interest in different measures of cyberbullying and the similarities and differences across countries and cultures. This article presents the Colombian validation of the European Cyberbullying Intervention Project Questionnaire (ECIPQ) involving 3,830 high school students (M = 13.9 years old, standard deviation = 1.61; 48.9 percent male), of which 1,931 were Colombian and 1,899 Spanish. Confirmatory factor analysis (CFA), content validation, and multigroup analysis were performed with each of the sample subgroups. The optimal fits and psychometric properties obtained confirm the robustness and suitability of the assessment instrument to jointly measure cyber-aggression and cyber-victimization. The results corroborated the theoretical construct and the two-dimensional and universal nature of cyberbullying. The multigroup analysis showed that cyberbullying dynamics are similar in both countries. The comparative analyses of prevalence revealed that Colombian students are less involved in cyberbullying. The results indicate the suitability of the instrument and the advantages of using such a tool to evaluate and guide psychoeducational interventions aimed at preventing cyberbullying in countries where few studies have been performed.

  9. Reservoir and injection technology and Heat Extraction Project

    Energy Technology Data Exchange (ETDEWEB)

    Horne, R.N.; Ramey, H.H. Jr.; Miller, F.G.; Brigham, W.E.; Kruger, P.

    1989-12-31

    For the Stanford Geothermal Program in the fiscal year 1989, the task areas include predictive modeling of reservoir behavior and tracer test interpretation and testing. Major emphasis is in reservoir technology, reinjection technology, and heat extraction. Predictive modeling of reservoir behavior consists of a multi-pronged approach to well test analysis under a variety of conditions. The efforts have been directed to designing and analyzing well tests in (1) naturally fractured reservoirs; (2) fractured wells; (3) complex reservoir geometries; and, (4) gas reservoirs including inertial and other effects. The analytical solutions for naturally fractured reservoirs are determined using fracture size distribution. In the study of fractured wells, an elliptical coordinate system is used to obtain semi-analytical solutions to finite conductivity fractures. Effort has also been directed to the modeling and creation of a user friendly computer program for steam/gas reservoirs including wellbore storage, skin and non-Darcy flow effects. This work has a complementary effort on modeling high flow rate wells including inertial effects in the wellbore and fractures. In addition, work on gravity drainage systems is being continued.

  10. Bantam System Technology Project Ground System Operations Concept and Plan

    Science.gov (United States)

    Moon, Jesse M.; Beveridge, James R.

    1997-01-01

    The Low Cost Booster Technology Program, also known as the Bantam Booster program, is a NASA sponsored initiative to establish a viable commercial technology to support the market for placing small payloads in low earth orbit. This market is currently served by large boosters which orbit a number of small payloads on a single launch vehicle, or by these payloads taking up available space on major commercial launches. Even by sharing launch costs, the minimum cost to launch one of these small satellites is in the 6 to 8 million dollar range. Additionally, there is a shortage of available launch opportunities which can be shared in this manner. The goal of the Bantam program is to develop two competing launch vehicles, with launch costs in the neighborhood of 1.5 million dollars to launch a 150 kg payload into low earth orbit (200 nautical mile sun synchronous). Not only could the cost of the launch be significantly less than the current situation, but the payload sponsor could expect better service for his expenditure, the ability to specify his own orbit, and a dedicated vehicle. By developing two distinct launch vehicles, market forces are expected to aid in keeping customer costs low.

  11. Technology Reinvestment Project Manufacturing Education and Training. Volume 1

    Science.gov (United States)

    Schroer, Bernard J.; Bond, Arthur J.

    1997-01-01

    The manufacturing education program is a joint program between the University of Alabama in Huntsville's (UAH) College of Engineering and Alabama A&M University's (AAMLJ) School of Engineering and Technology. The objective of the program is to provide more hands-on experiences to undergraduate engineering and engineering technology students. The scope of work consisted of. Year 1, Task 1: Review courses at Alabama Industrial Development Training (AIDT); Task 2: Review courses at UAH and AAMU; Task 3: Develop new lab manuals; Task 4: Field test manuals; Task 5: Prepare annual report. Year 2, Task 1: Incorporate feedback into lab manuals; Task 2 : Introduce lab manuals into classes; Task 3: Field test manuals; Task 4: Prepare annual report. Year 3, Task 1: Incorporate feedback into lab manuals; Task 2: Introduce lab manuals into remaining classes; Task 3: Conduct evaluation with assistance of industry; Task 4: Prepare final report. This report only summarizes the activities of the University of Alabama in Huntsville. The activities of Alabama A&M University are contained in a separate report.

  12. Performance-Based Technology Selection Filter description report. INEL Buried Waste Integrated Demonstration System Analysis project

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

    1992-05-01

    A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL).

  13. The International Science and Technology Center (ISTC) and ISTC projects related to nuclear safety. Information review

    International Nuclear Information System (INIS)

    Tocheny, Lev V.

    2003-01-01

    The ISTC is an intergovernmental organization created ten years ago by Russia, USA, EU and Japan in Moscow. The Center supports numerous science and technology projects in different areas, from biotechnologies and environmental problems to all aspects of nuclear studies, including those focused on the development of effective innovative concepts and technologies in the nuclear field, in general, and for improvement of nuclear safety, in particular. The presentation addresses some technical results of the ISTC projects as well as methods and approaches employed by the ISTC to foster close international collaboration and manage projects towards fruitful results. (author)

  14. The validity of visual acuity assessment using mobile technology devices in the primary care setting.

    Science.gov (United States)

    O'Neill, Samuel; McAndrew, Darryl J

    2016-04-01

    The assessment of visual acuity is indicated in a number of clinical circumstances. It is commonly conducted through the use of a Snellen wall chart. Mobile technology developments and adoption rates by clinicians may potentially provide more convenient methods of assessing visual acuity. Limited data exist on the validity of these devices and applications. The objective of this study was to evaluate the assessment of distance visual acuity using mobile technology devices against the commonly used 3-metre Snellen chart in a primary care setting. A prospective quantitative comparative study was conducted at a regional medical practice. The visual acuity of 60 participants was assessed on a Snellen wall chart and two mobile technology devices (iPhone, iPad). Visual acuity intervals were converted to logarithm of minimum angle of resolution (logMAR) scores and subjected to intraclass correlation coefficient (ICC) assessment. The results show a high level of general agreement between testing modality (ICC 0.917 with a 95% confidence interval of 0.887-0.940). The high level of agreement of visual acuity results between the Snellen wall chart and both mobile technology devices suggests that clinicians can use this technology with confidence in the primary care setting.

  15. Development and Validation of Web-Based Courseware for Junior Secondary School Basic Technology Students in Nigeria

    Directory of Open Access Journals (Sweden)

    Amosa Isiaka Gambari

    2018-02-01

    Full Text Available This research aimed to develop and validate a web-based courseware for junior secondary school basic technology students in Nigeria. In this study, a mixed method quantitative pilot study design with qualitative components was used to test and ascertain the ease of development and validation of the web-based courseware. Dick and Carey instructional system design model was adopted for developing the courseware. Convenience sampling technique was used in selecting the three content, computer and educational technology experts to validate the web-based courseware. Non-randomized and non-equivalent Junior secondary school students from two schools were used for field trial validation. Four validating instruments were employed in conducting this study: (i Content Validation Assessment Report (CVAR; (ii Computer Expert Validation Assessment Report (CEAR; (iii Educational Technology Experts Validation Assessment Report (ETEVAR; and (iv Students Validation Questionnaire (SVQ. All the instruments were face and content validated. SVQ was pilot tested and reliability coefficient of 0.85 was obtained using Cronbach Alpha. CVAR, CEAR, ETEVAR were administered on content specialists, computer experts, and educational technology experts, while SVQ was administered on 83 JSS students from two selected secondary schools in Minna. The findings revealed that the process of developing web-based courseware using Dick and Carey Instructional System Design was successful. In addition, the report from the validating team revealed that the web-based courseware is valuable for learning basic technology. It is therefore recommended that web-based courseware should be produced to teach basic technology concepts on large scale.

  16. Northwest Open Automated Demand Response Technology Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Kiliccote, Sila; Piette, Mary Ann; Dudley, Junqiao

    2010-03-17

    The Lawrence Berkeley National Laboratory (LBNL) Demand Response Research Center (DRRC) demonstrated and evaluated open automated demand response (OpenADR) communication infrastructure to reduce winter morning and summer afternoon peak electricity demand in commercial buildings the Seattle area. LBNL performed this demonstration for the Bonneville Power Administration (BPA) in the Seattle City Light (SCL) service territory at five sites: Seattle Municipal Tower, Seattle University, McKinstry, and two Target stores. This report describes the process and results of the demonstration. OpenADR is an information exchange model that uses a client-server architecture to automate demand-response (DR) programs. These field tests evaluated the feasibility of deploying fully automated DR during both winter and summer peak periods. DR savings were evaluated for several building systems and control strategies. This project studied DR during hot summer afternoons and cold winter mornings, both periods when electricity demand is typically high. This is the DRRC project team's first experience using automation for year-round DR resources and evaluating the flexibility of commercial buildings end-use loads to participate in DR in dual-peaking climates. The lessons learned contribute to understanding end-use loads that are suitable for dispatch at different times of the year. The project was funded by BPA and SCL. BPA is a U.S. Department of Energy agency headquartered in Portland, Oregon and serving the Pacific Northwest. BPA operates an electricity transmission system and markets wholesale electrical power at cost from federal dams, one non-federal nuclear plant, and other non-federal hydroelectric and wind energy generation facilities. Created by the citizens of Seattle in 1902, SCL is the second-largest municipal utility in America. SCL purchases approximately 40% of its electricity and the majority of its transmission from BPA through a preference contract. SCL also

  17. Policy implications of endogenous technological learning: some conclusions of the EU JOULE III project TEEM

    International Nuclear Information System (INIS)

    Kypreos, S.; Barreto, L.

    2000-01-01

    The TEEM (Energy Technology Dynamics and Advanced System Modelling) project focused activities on the role that technology and R and D spending could play for the mitigation of climatic change. The primary objectives of the PSI team were to share experience with other model developers in Europe, to expand the modelling capabilities, to contribute to quantitative analyses on the diffusion of innovative technologies, and to gain insights on the public energy research and development strategies. The paper describes the main findings of some scenarios on CO 2 mitigation for the global electricity system based on analyses using the multi-regional version of the ERIS prototype model, developed during the project. (authors)

  18. 2017 NMC Technology Outlook for Nordic Schools A Horizon Project Regional Report

    DEFF Research Database (Denmark)

    2017-01-01

    research effort between the New Media Consortium (NMC) and the Norwegian Centre for ICT in Education to inform Nordic school leaders and decision-makers about significant developments in technologies supporting teaching, learning, and creative inquiry in primary and secondary education across Denmark......Adams Becker, S., Cummins, M., Freeman, A., and Rose, K. (2017). 2017 NMC Technology Outlook for Nordic Schools: A Horizon Project Regional Report. Austin, Texas: The New Media Consortium. The 2017 NMC Technology Outlook for Nordic Schools: A Horizon Project Regional Report reflects a collaborative...

  19. International Linear Collider Project and civil engineering technology

    International Nuclear Information System (INIS)

    2007-01-01

    The objectives, activities and members of the Linear Collider Subcommittee of Japan Society of Civil Engineers (LC subcommittee) are described. The LC subcommittee consisted of five working groups such as the working group on planning and project and management, working group on geological survey, test, and environmental design, working group on structural and environmental design, working group on construction and maintenance and working group on information investigation of ILC. The policy of activities, work schedule, and report of each working group are described. Construction of ILC research facilities, standard cross section of tunnel, measurement results of long-term displacement of large underground cavities, the tunnel damages by earthquake in the south part of Hyogo prefecture in Japan, TBM method, collection of information are reported. (S.Y.)

  20. Decontamination Technologies, Task 3, Urban Remediation and Response Project

    Energy Technology Data Exchange (ETDEWEB)

    Heiser,J.; Sullivan, T.

    2009-06-30

    In the aftermath of a Radiological Dispersal Device (RDD, also known as a dirty bomb) it will be necessary to remediate the site including building exteriors and interiors, equipment, pavement, vehicles, personal items etc. Remediation will remove or reduce radioactive contamination from the area using a combination of removing and disposing of many assets (including possible demolition of buildings), decontaminating and returning to service other assets, and fixing in place or leaving in place contamination that is deemed 'acceptable'. The later will require setting acceptable dose standards, which will require negotiation with all involved parties and a balance of risk and cost to benefit. To accomplish the first two, disposal or decontamination, a combination of technologies will be deployed that can be loosely classified as: Decontamination; Equipment removal and size reduction; and Demolition. This report will deal only with the decontamination technologies that will be used to return assets to service or to reduce waste disposal. It will not discuss demolition, size reduction or removal technologies or equipment (e.g., backhoe mounted rams, rock splitter, paving breakers and chipping hammers, etc.). As defined by the DOE (1994), decontamination is removal of radiological contamination from the surfaces of facilities and equipment. Expertise in this field comes primarily from the operation and decommissioning of DOE and commercial nuclear facilities as well as a small amount of ongoing research and development closely related to RDD decontamination. Information related to decontamination of fields, buildings, and public spaces resulting from the Goiania and Chernobyl incidents were also reviewed and provide some meaningful insight into decontamination at major urban areas. In order to proceed with decontamination, the item being processed needs to have an intrinsic value that exceeds the cost of the cleaning and justifies the exposure of any workers

  1. Decontamination Technologies, Task 3, Urban Remediation and Response Project

    International Nuclear Information System (INIS)

    Heiser, J.; Sullivan, T.

    2009-01-01

    In the aftermath of a Radiological Dispersal Device (RDD, also known as a dirty bomb) it will be necessary to remediate the site including building exteriors and interiors, equipment, pavement, vehicles, personal items etc. Remediation will remove or reduce radioactive contamination from the area using a combination of removing and disposing of many assets (including possible demolition of buildings), decontaminating and returning to service other assets, and fixing in place or leaving in place contamination that is deemed 'acceptable'. The later will require setting acceptable dose standards, which will require negotiation with all involved parties and a balance of risk and cost to benefit. To accomplish the first two, disposal or decontamination, a combination of technologies will be deployed that can be loosely classified as: Decontamination; Equipment removal and size reduction; and Demolition. This report will deal only with the decontamination technologies that will be used to return assets to service or to reduce waste disposal. It will not discuss demolition, size reduction or removal technologies or equipment (e.g., backhoe mounted rams, rock splitter, paving breakers and chipping hammers, etc.). As defined by the DOE (1994), decontamination is removal of radiological contamination from the surfaces of facilities and equipment. Expertise in this field comes primarily from the operation and decommissioning of DOE and commercial nuclear facilities as well as a small amount of ongoing research and development closely related to RDD decontamination. Information related to decontamination of fields, buildings, and public spaces resulting from the Goiania and Chernobyl incidents were also reviewed and provide some meaningful insight into decontamination at major urban areas. In order to proceed with decontamination, the item being processed needs to have an intrinsic value that exceeds the cost of the cleaning and justifies the exposure of any workers during the

  2. Telecommunication Technologies for Smart Grid Projects with Focus on Smart Metering Applications

    Directory of Open Access Journals (Sweden)

    Nikoleta Andreadou

    2016-05-01

    Full Text Available This paper provides a study of the smart grid projects realised in Europe and presents their technological solutions with a focus on smart metering Low Voltage (LV applications. Special attention is given to the telecommunications technologies used. For this purpose, we present the telecommunication technologies chosen by several European utilities for the accomplishment of their smart meter national roll-outs. Further on, a study is performed based on the European Smart Grid Projects, highlighting their technological options. The range of the projects analysed covers the ones including smart metering implementation as well as those in which smart metering applications play a significant role in the overall project success. The survey reveals that various topics are directly or indirectly linked to smart metering applications, like smart home/building, energy management, grid monitoring and integration of Renewable Energy Sources (RES. Therefore, the technological options that lie behind such projects are pointed out. For reasons of completeness, we also present the main characteristics of the telecommunication technologies that are found to be used in practice for the LV grid.

  3. Utilization of paleoclimate results to validate projections of a future greenhouse warming

    International Nuclear Information System (INIS)

    Crowley, T.J.

    1991-01-01

    Paleoclimate data provide a rich source of information for testing projections of future greenhouse trends. This paper summarizes the present state-of-the-art as to assessments of two important climate problems. (1) Validation of climate models - The same climate models that have been used to make greenhouse forecasts have also been used for paleoclimate simulations. Comparisons of model results and observations indicate some impressive successes but also some cases where there are significant divergences between models and observations. However, special conditions associated with the impressive successes could lead to a false confidence in the models; disagreements are a topic of greater concern. It remains to be determined whether the disagreements are due to model limitations or uncertainties in geologic data. (2) Role of CO 2 as a significant climate feedback: Paleoclimate studies indicate that the climate system is generally more sensitive than our ability to model it. Addition or subtraction of CO 2 leads to a closer agreement between models and observations. In this respect paleoclimate results in general support the conclusion that CO 2 is an important climate feedback, with the magnitude of the feedback approximately comparable to the sensitivity of present climate models. If the CO 2 projections are correct, comparison of the future warming with past warm periods indicate that there may be no geologic analogs for a future warming; the future greenhouse climate may represent a unique climate realization in earth history. 55 refs.; 5 figs

  4. Utilization of paleoclimate results to validate projections of a future greenhouse warming

    International Nuclear Information System (INIS)

    Crowley, T.J.

    1990-01-01

    Paleoclimate data provide a rich source of information for testing projections of future greenhouse trends. This paper summarizes the present state-of-the-art as to assessments of two important climate problems. (1) Validation of climate models - The same climate models that have been used to make greenhouse forecasts have also been used for paleoclimate simulations. Comparisons of model results and observations indicate some impressive successes but also some cases where there are significant divergences between models and observations. However, special conditions associated with the impressive successes could lead to a false confidence in the models; disagreements are a topic of greater concern. It remains to be determined whether the disagreements are due to model limitations or uncertainties in geologic data. (2) Role of CO 2 as a significant climate feedback: Paleoclimate studies indicate that the climate system is generally more sensitive than our ability to model it. Addition or subtraction of CO 2 leads to a closer agreement between models and observations. In this respect paleoclimate results in general support the conclusion that CO 2 is an important climate feedback, with the magnitude of the feedback approximately comparable to the sensitivity of present climate models. If the CO 2 projections are correct, comparison of the future warming with past warm periods indicate that there may be no geologic analogs for a future warming; the future greenhouse climate may represent a unique climate realization in earth history

  5. BIM integration in education: A case study of the construction technology project Bolt Tower Dolni Vitkovice

    Directory of Open Access Journals (Sweden)

    Venkrbec Vaclav

    2017-12-01

    Full Text Available Building information modeling (BIM can support effectiveness during many activities in the AEC industry. even when processing a construction-technological project. This paper presents an approach how to use building information model in higher education, especially during the work on diploma thesis and it supervision. Diploma thesis is project based work, which aims to compile a construction-technological project for a selected construction. The paper describes the use of input data, working with them and compares this process with standard input data such as printed design documentation. The effectiveness of using the building information model as a input data for construction-technological project is described in the conclusion.

  6. Development of Welding and Hardfacing Technology: challenges for ASTRID project

    International Nuclear Information System (INIS)

    Marlaud, T.; Bonnot, A-F.; Pierron, D.; Forest, L.; Blat-Yrieix, M.; Mathieu, J-P.; Blanc, M.

    2015-01-01

    The purpose of this article is to present the challenges for welding and hardfacing technology involved by sodium fast breeder reactors and by ASTRID specificities. To meet with compromises between achieving good ductility properties (toughness, impact, elongation…) and room/high temperature mechanical resistance (creep, strength…) in welds, as ensuring metallurgical (solidification cracking) and process weldability, the development of specific welding filler consumables for materials used in the creep conditions is needed. The developments deal with the candidate materials (316L(N), Grade 91) and integrate a qualification approach to aim at achiving a robust manufacturing. Contact zones in FBR sodium environment are subjected to various solicitations (high temperature, severe contact pressure, cycling…). When subjected to radiation, hardfacing alternatives to traditional cobalt base coatings depend on the application are required. The approach to evaluate the performance of alternative solutions, through an experimental program, will be presented. (author)

  7. Validation of smart sensor technologies for instrument calibration reduction in nuclear power plants

    International Nuclear Information System (INIS)

    Hashemian, H.M.; Mitchell, D.W.; Petersen, K.M.; Shell, C.S.

    1993-01-01

    This report presents the preliminary results of a research and development project on the validation of new techniques for on-line testing of calibration drift of process instrumentation channels in nuclear power plants. These techniques generally involve a computer-based data acquisition and data analysis system to trend the output of a large number of instrument channels and identify the channels that have drifted out of tolerance. This helps limit the calibration effort to those channels which need the calibration, as opposed to the current nuclear industry practice of calibrating essentially all the safety-related instrument channels at every refueling outage

  8. Validation of smart sensor technologies for instrument calibration reduction in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Hashemian, H M; Mitchell, D W; Petersen, K M; Shell, C S [Analysis and Measurement Services Corp., Knoxville, TN (United States)

    1993-01-01

    This report presents the preliminary results of a research and development project on the validation of new techniques for on-line testing of calibration drift of process instrumentation channels in nuclear power plants. These techniques generally involve a computer-based data acquisition and data analysis system to trend the output of a large number of instrument channels and identify the channels that have drifted out of tolerance. This helps limit the calibration effort to those channels which need the calibration, as opposed to the current nuclear industry practice of calibrating essentially all the safety-related instrument channels at every refueling outage.

  9. Validation of a for anaerobic bacteria optimized MALDI-TOF MS biotyper database: The ENRIA project.

    Science.gov (United States)

    Veloo, A C M; Jean-Pierre, H; Justesen, U S; Morris, T; Urban, E; Wybo, I; Kostrzewa, M; Friedrich, A W

    2018-03-12

    Within the ENRIA project, several 'expertise laboratories' collaborated in order to optimize the identification of clinical anaerobic isolates by using a widely available platform, the Biotyper Matrix Assisted Laser Desorption Ionization Time-of-Flight Mass Spectrometry (MALDI-TOF MS). Main Spectral Profiles (MSPs) of well characterized anaerobic strains were added to one of the latest updates of the Biotyper database db6903; (V6 database) for common use. MSPs of anaerobic strains nominated for addition to the Biotyper database are included in this validation. In this study, we validated the optimized database (db5989 [V5 database] + ENRIA MSPs) using 6309 anaerobic isolates. Using the V5 database 71.1% of the isolates could be identified with high confidence, 16.9% with low confidence and 12.0% could not be identified. Including the MSPs added to the V6 database and all MSPs created within the ENRIA project, the amount of strains identified with high confidence increased to 74.8% and 79.2%, respectively. Strains that could not be identified using MALDI-TOF MS decreased to 10.4% and 7.3%, respectively. The observed increase in high confidence identifications differed per genus. For Bilophila wadsworthia, Prevotella spp., gram-positive anaerobic cocci and other less commonly encountered species more strains were identified with higher confidence. A subset of the non-identified strains (42.1%) were identified using 16S rDNA gene sequencing. The obtained identities demonstrated that strains could not be identified either due to the generation of spectra of insufficient quality or due to the fact that no MSP of the encountered species was present in the database. Undoubtedly, the ENRIA project has successfully increased the number of anaerobic isolates that can be identified with high confidence. We therefore recommend further expansion of the database to include less frequently isolated species as this would also allow us to gain valuable insight into the clinical

  10. Survey on Projects at DLR Simulation and Software Technology with Focus on Software Engineering and HPC

    OpenAIRE

    Schreiber, Andreas; Basermann, Achim

    2013-01-01

    We introduce the DLR institute “Simulation and Software Technology” (SC) and present current activities regarding software engineering and high performance computing (HPC) in German or international projects. Software engineering at SC focusses on data and knowledge management as well as tools for studies and experiments. We discuss how we apply software configuration management, validation and verification in our projects. Concrete research topics are traceability of (software devel...

  11. Information Technology in project-organized electronic and computer technology engineering education

    DEFF Research Database (Denmark)

    Nielsen, Kirsten Mølgaard; Nielsen, Jens Frederik Dalsgaard

    1999-01-01

    This paper describes the integration of IT in the education of electronic and computer technology engineers at Institute of Electronic Systems, Aalborg Uni-versity, Denmark. At the Institute Information Technology is an important tool in the aspects of the education as well as for communication...

  12. A forward looking approach to project management tools, trends, and the impact of disruptive technologies

    CERN Document Server

    Gurjar, Nikhil

    2017-01-01

    This book is intended as a basis for advanced treatment of concepts in project management. In the current scenario where most questions are answered through the internet, the knowledge element in project management has come under the influence of disruptive technologies. In other words, project managers no longer get 'points' for knowing something that is easily available on the internet. This has far-reaching consequences. The present day project managers need to orient themselves to newer benchmarks of what is required for success on the business front. This book deals with a few such advanced concepts in project management. This book is not designed as an elementary primer to the field of project management, rather it is an advanced level treatment on the subject, to be read after the preliminary study has already been completed. The book is designed for practicing project managers, and graduate students in engineering and management, who need to understand the dynamics that are typically encountered in a ...

  13. Cost-Effective ISS Space-Environment Technology Validation of Advanced Roll-Out Solar Array (ROSA), Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — DSS proposes to systematically mature, mitigate risk for; and perform hardware-based ground validations / demonstrations of a low-cost, high technology payoff,...

  14. A Nordic Project Project on High Speed Low Power Design in Sub-micron CMOS Technology for Mobile

    DEFF Research Database (Denmark)

    Olesen, Ole

    1997-01-01

    digital base-band processing on the same chip. Presently, only few examples of CMOS used for RF front-end circuits have been presented by academia, and so far no commercial products exist. The approach has been to do a CMOS block by block replacement of the blocks in traditional transceiver architectures......This paper is a survey paper presenting the Nordic CONFRONT project and reporting some results from the group at CIE/DTU, Denmark. The objective of the project is to demonstrate the feasibility of sub-micron CMOS for the realisation of RF front-end circuits operating at frequencies in the 1...... circuit design is based on state-of-the-art CMOS technology (0.5µm and below) including circuits operating at 2GHz. CMOS technology is chosen, since a CMOS implementation is likely to be significantly cheaper than a bipolar or a BiCMOS solution, and it offers the possibility to integrate the predominantly...

  15. The International Stripa Project: Technology transfer from cooperation in scientific and technological research on nuclear waste disposal

    International Nuclear Information System (INIS)

    Levich, R.A.; Ferrigan, P.M.; Wilkey, P.L.

    1990-01-01

    The Nuclear Energy Agency of the organization for Economic Cooperation and Development (OECD/NEA) sponsors the International Stripa Project. The objectives of the Stripa Project are to develop techniques for characterizing sites located deep in rock formations that are potentially suitable for the geologic disposal of high-level radioactive wastes and to evaluate particular engineering design considerations that could enhance the long-term safety of a high-level radioactive waste repository in a geologic medium. The purpose of this paper is to briefly summarize the research conducted at Stripa and discuss the ways in which the technology developed for the Stripa Project has been and will be transfered to the United States Civilian Radioactive Waste Management Program's Yucca Mountain Project. 3 refs., 2 figs

  16. The International Stripa Project: Technology transfer from cooperation in scientific and technological research on nuclear waste disposal

    Energy Technology Data Exchange (ETDEWEB)

    Levich, R.A. [USDOE Nevada Operations Office, Las Vegas, NV (USA). Yucca Mountain Project Office; Patera, E.S. [Los Alamos National Lab., NM (USA); Ferrigan, P.M. [USDOE Chicago Operations Office, Argonne, IL (USA); Wilkey, P.L. [CER Corp., Argonne, IL (USA)

    1990-04-01

    The Nuclear Energy Agency of the organization for Economic Cooperation and Development (OECD/NEA) sponsors the International Stripa Project. The objectives of the Stripa Project are to develop techniques for characterizing sites located deep in rock formations that are potentially suitable for the geologic disposal of high-level radioactive wastes and to evaluate particular engineering design considerations that could enhance the long-term safety of a high-level radioactive waste repository in a geologic medium. The purpose of this paper is to briefly summarize the research conducted at Stripa and discuss the ways in which the technology developed for the Stripa Project has been and will be transfered to the United States Civilian Radioactive Waste Management Program`s Yucca Mountain Project. 3 refs., 2 figs.

  17. Validation procedures used in the Background Soil Characterization Project on the Oak Ridge Reservation, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    1993-12-01

    The purpose of this report is (1) to document the data validation process developed for the Background Soil Characterization Project (BSCP); (2) to offer members of other project teams and potential data users the benefit of the experience gained in the BSCP in the area of developing project-specific data validation criteria and procedures based on best available guidance and technical information; and (3) to provide input and guidance to the efforts under way within Martin Marietta Energy Systems, Inc., to develop standard operating procedures to streamline and optimize the analytical laboratory data validation process for general use by making it more technically rigorous, consistent, and cost effective. Lessons learned from the BSCP are also provided to meet this end (Sect. 1.3)

  18. Instrument for assessing mobile technology acceptability in diabetes self-management: a validation and reliability study

    Directory of Open Access Journals (Sweden)

    Frandes M

    2017-02-01

    Full Text Available Mirela Frandes,1 Anca V Deiac,2 Bogdan Timar,1,3 Diana Lungeanu1,2 1Department of Functional Sciences, “Victor Babes” University of Medicine and Pharmacy of Timisoara, 2Department of Mathematics, Polytechnic University of Timisoara, 3Third Medical Clinic, Emergency Hospital of Timisoara, Timisoara, Romania Background: Nowadays, mobile technologies are part of everyday life, but the lack of instruments to assess their acceptability for the management of chronic diseases makes their actual adoption for this purpose slow.Objective: The objective of this study was to develop a survey instrument for assessing patients’ attitude toward and intention to use mobile technology for diabetes mellitus (DM self-management, as well as to identify sociodemographic characteristics and quality of life factors that affect them.Methods: We first conducted the documentation and instrument design phases, which were subsequently followed by the pilot study and instrument validation. Afterward, the instrument was administered 103 patients (median age: 37 years; range: 18–65 years diagnosed with type 1 or type 2 DM, who accepted to participate in the study. The reliability and construct validity were assessed by computing Cronbach’s alpha and using factor analysis, respectively.Results: The instrument included statements about the actual use of electronic devices for DM management, interaction between patient and physician, attitude toward using mobile technology, and quality of life evaluation. Cronbach’s alpha was 0.9 for attitude toward using mobile technology and 0.97 for attitude toward using mobile device applications for DM self-management. Younger patients (Spearman’s ρ=-0.429; P<0.001 with better glycemic control (Spearman’s ρ=-0.322; P<0.001 and higher education level (Kendall’s τ=0.51; P<0.001 had significantly more favorable attitude toward using mobile assistive applications for DM control. Moreover, patients with a higher quality of

  19. Application of the Exergy UCG technology in international UCG projects

    Science.gov (United States)

    Blinderman, M. S.

    2017-07-01

    Underground Coal Gasification is a subject of continuing global interest in the energy sector. While the international scenario in UCG is promising, it is deeply desirable that advances in this area are seen in India as well. This is particularly so with the Paris Climate Agreement bringing in more stringent challenges for clean energy development. India has many potential coal basins which may be suitable for UCG deployment. India is in dire need of indigenous source of gaseous and liquid hydrocarbons that could compete with imported products. It is also the country with exceptionally large and diverse coal and lignite resources, large part of which could not be mined due to geological complexity and prohibitive cost. Thus, there is a rationale that the εUCG™ technology plays a decisive role in realizing the potential of Indian coal resources for the benefit of Indian industry and population. This article has been adapted by Dr. Ajay K. Singh from a lecture delivered at the “Workshop on Challenges and Opportunities of Underground Coal Gasification”, Vigyan Bhawan, New Delhi on 14 February 2017.

  20. An Empirical Analysis of Technology Transfer of National R&D Projects in South Korea

    Directory of Open Access Journals (Sweden)

    Mi-Sun Kim

    2015-01-01

    Full Text Available This study is aimed at seeking policy implications for the policy makers of South Korean government and finding a direction to support R&D institutions in performing R&D activities more efficiently, by analyzing the factors influencing technology transfer of the national R&D projects. The data retrieved from NTIS (National Science & Technology Information Service was used in analyzing the results of 575 projects with 1,903 cases of technology transfer, performed by the Ministry of Science, ICT and Future Planning, between 2002 and 2012. We found that there were significant differences between the government funded institutions and the universities and between basic R&D and applied ones. We also discovered that the government funded institutions did not necessarily take a better position than the universities in terms of the quantity of technology transfer. Lastly, the applied R&D of the universities was very vulnerable in terms of technology transfer.

  1. Ceramic Technology for Advanced Heat Engines Project. Semiannual progress report, October 1984-March 1985

    Energy Technology Data Exchange (ETDEWEB)

    1985-09-01

    A five-year project plan was developed with extensive input from private industry. The objective of the project is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines.

  2. Validation of assistive technology on psychoactive substances for visually impaired people.

    Science.gov (United States)

    Guimarães, Fernanda Jorge; Pagliuca, Lorita Marlena Freitag

    2017-12-26

    To validate the assistive technology "Drugs: reflection for prevention" to be used with visually impaired people. Quantitative and quasi-experimental study, contrasting knowledge before and after the use of the assistive technology with 140 visually impaired people in institutes and associations for people with visual impairment. A questionnaire with identification data, a pre-test, a post-test and a questionnaire to assess the assistive technology were applied. Data were described through means and standard deviations, and analyses included the McNemar test, the exact binomial distribution test, and the intraclass correlation coefficient. Participants were male (65.7%), 84.3% were blind, aged 37.1 years on average and with schooling of 10.1 years on average. There were more correct answers in the post-test (p visually impaired people about psychoactive substance abuse. Implications for rehabilitation Created new tool for prevention substance abuse that can be accessed easily. Improved information about substance psychoactive for users of the assistive technology. Improved quality of life for its users.

  3. Data validation platform for the sophisticated monitoring and communication of the energy technology sector

    Energy Technology Data Exchange (ETDEWEB)

    Flamos, Alexandros; Doukas, Haris; Psarras, J. [Management and Decision Support Systems Lab (EPU-NTUA), School of Electrical and Computer Engineering, National Technical University of Athens, 9, Iroon Polytechniou str., 15780, Athens (Greece)

    2010-05-15

    It has very often been stated that the difficulty and complexity of achieving green energy targets in the European Union (EU) will require strengthened measures to promote implementation of New Energy Technologies, Energy End-use Efficiency, as well as measures to support the related energy Research and Technology Development (RTD). Often forgotten is the fact, that most of all, a European-wide co-ordinated forum is needed to continuously develop and sophisticate the monitoring and methodology results, bringing together specialised statisticians, energy researchers and experts on energy socio-economics. The aim of this paper is to present the Scientific Reference System (SRS) Scorecard; a data validation platform for the sophisticated monitoring and communication of the energy technology sector. In this respect, the concept of the SRS scorecard system will be laid out, the parameters and the scoring criteria will be explained as well as the assessment system so as to provide the interested reader with the basis needed to understand the technology evaluation examples provided, as well as its critical analysis. (author)

  4. The Theory of Planned Behavior (TPB) and Pre-Service Teachers' Technology Acceptance: A Validation Study Using Structural Equation Modeling

    Science.gov (United States)

    Teo, Timothy; Tan, Lynde

    2012-01-01

    This study applies the theory of planned behavior (TPB), a theory that is commonly used in commercial settings, to the educational context to explain pre-service teachers' technology acceptance. It is also interested in examining its validity when used for this purpose. It has found evidence that the TPB is a valid model to explain pre-service…

  5. The Canadian Arctic ACE/OSIRIS Validation Project at PEARL: Validating Satellite Observations Over the High Arctic

    Science.gov (United States)

    Walker, Kaley A.; Strong, Kimberly; Fogal, Pierre F.; Drummond, James R.

    2016-04-01

    Ground-based measurements provide critical data for the validation of satellite retrievals of atmospheric trace gases and for the assessment of long-term stability of these measurements. As of February 2016, the Canadian-led Atmospheric Chemistry Experiment (ACE) satellite mission has been making measurements of the Earth's atmosphere for nearly twelve years and Canada's Optical Spectrograph and InfraRed Imager System (OSIRIS) instrument on the Odin satellite has been operating for fourteen years. As ACE and OSIRIS operations have extended beyond their planned two-year missions, there is an ongoing need to validate the trace gas data profiles from the ACE-Fourier Transform Spectrometer (ACE-FTS), the Measurement of Aerosol Extinction in the Stratosphere and Troposphere Retrieved by Occultation (ACE-MAESTRO) and OSIRIS. In particular, validation comparisons are needed during Arctic springtime to understand better the measurements of species involved in stratospheric ozone chemistry. To this end, thirteen Canadian Arctic ACE/OSIRIS Validation Campaigns have been conducted during the spring period (February - April in 2004 - 2016) at the Polar Environment Atmospheric Research Laboratory (PEARL) in Eureka, Nunavut (80N, 86W). For the past decade, these campaigns have been undertaken in collaboration with the Canadian Network for the Detection of Atmospheric Change (CANDAC). The spring period coincides with the most chemically active time of year in the Arctic, as well as a significant number of satellite overpasses. A suite of as many as 12 ground-based instruments, as well as frequent balloon-borne ozonesonde and radiosonde launches, have been used in each campaign. These instruments include: a ground-based version of the ACE-FTS (PARIS - Portable Atmospheric Research Interferometric Spectrometer), a terrestrial version of the ACE-MAESTRO, a SunPhotoSpectrometer, two CANDAC zenith-viewing UV-visible grating spectrometers, a Bomem DA8 Fourier transform spectrometer

  6. Project plan hydrogen energy systems technology. Phase 1: Hydrogen energy systems technology study

    Science.gov (United States)

    1974-01-01

    An overview of the potential need for hydrogen as a source of energy in the future was presented in order to identify and define the technology requirements for the most promising approaches to meet that need. The following study objectives were discussed: (1) determination of the future demand for hydrogen, based on current trends and anticipated new uses, (2) identification of the critical research and technology advances required to meet this need considering, to the extent possible, raw material limitations, economics, and environmental effects, and (3) definition and recommendation of the scope and space of a National Hydrogen Energy Systems Technology Program and outline of a Program Development Plan.

  7. A Systematic Review of Technology-Based Dietary Intake Assessment Validation Studies That Include Carotenoid Biomarkers

    Science.gov (United States)

    Burrows, Tracy L.; Rollo, Megan E.; Williams, Rebecca; Wood, Lisa G.; Garg, Manohar L.; Jensen, Megan; Collins, Clare E.

    2017-01-01

    Technological advances have allowed for the evolution of traditional dietary assessment methods. The aim of this review is to evaluate the accuracy of technology-based dietary assessment methods to determine carotenoid and/or fruit and vegetable intake when compared with carotenoid biomarkers. An online search strategy was undertaken to identify studies published in the English language up to July 2016. Inclusion criteria were adults ≥18 years, a measure of dietary intake that used information and communication technologies that specified fruit and/or vegetable intake or dietary carotenoid, a biomarker of carotenoid status and the association between the two. Sixteen articles from 13 studies were included with the majority cross-sectional in design (n = 9). Some studies used multiple dietary assessment methods with the most common: food records (n = 7), 24-h diet recalls (n = 5), food frequency questionnaires (n = 3) and diet quality assessed by dietary screener (n = 1). Two studies were directly web based, with four studies using technology that could be completed offline and data later transferred. Two studies utilised technology in the collection of dietary data, while the majority (n = 11) automated the collection in combination with nutrient analysis of the dietary data. Four studies provided correlation values between dietary carotenoids with biomarkers, ranging from r = 0.13 to 0.62 with the remaining studies comparing a measure of fruit and vegetable intake with biomarkers (r = 0.09 to 0.25). This review provides an overview of technology-based dietary assessment methods that have been used in validation studies with objectively measured carotenoids. Findings were positive with these dietary assessment measures showing mostly moderate associations with carotenoid biomarkers. PMID:28216582

  8. A Systematic Review of Technology-Based Dietary Intake Assessment Validation Studies That Include Carotenoid Biomarkers.

    Science.gov (United States)

    Burrows, Tracy L; Rollo, Megan E; Williams, Rebecca; Wood, Lisa G; Garg, Manohar L; Jensen, Megan; Collins, Clare E

    2017-02-14

    Technological advances have allowed for the evolution of traditional dietary assessment methods. The aim of this review is to evaluate the accuracy of technology-based dietary assessment methods to determine carotenoid and/or fruit and vegetable intake when compared with carotenoid biomarkers. An online search strategy was undertaken to identify studies published in the English language up to July 2016. Inclusion criteria were adults ≥18 years, a measure of dietary intake that used information and communication technologies that specified fruit and/or vegetable intake or dietary carotenoid, a biomarker of carotenoid status and the association between the two. Sixteen articles from 13 studies were included with the majority cross-sectional in design ( n = 9). Some studies used multiple dietary assessment methods with the most common: food records ( n = 7), 24-h diet recalls ( n = 5), food frequency questionnaires ( n = 3) and diet quality assessed by dietary screener ( n = 1). Two studies were directly web based, with four studies using technology that could be completed offline and data later transferred. Two studies utilised technology in the collection of dietary data, while the majority ( n = 11) automated the collection in combination with nutrient analysis of the dietary data. Four studies provided correlation values between dietary carotenoids with biomarkers, ranging from r = 0.13 to 0.62 with the remaining studies comparing a measure of fruit and vegetable intake with biomarkers ( r = 0.09 to 0.25). This review provides an overview of technology-based dietary assessment methods that have been used in validation studies with objectively measured carotenoids. Findings were positive with these dietary assessment measures showing mostly moderate associations with carotenoid biomarkers.

  9. A Systematic Review of Technology-Based Dietary Intake Assessment Validation Studies That Include Carotenoid Biomarkers

    Directory of Open Access Journals (Sweden)

    Tracy L. Burrows

    2017-02-01

    Full Text Available Technological advances have allowed for the evolution of traditional dietary assessment methods. The aim of this review is to evaluate the accuracy of technology-based dietary assessment methods to determine carotenoid and/or fruit and vegetable intake when compared with carotenoid biomarkers. An online search strategy was undertaken to identify studies published in the English language up to July 2016. Inclusion criteria were adults ≥18 years, a measure of dietary intake that used information and communication technologies that specified fruit and/or vegetable intake or dietary carotenoid, a biomarker of carotenoid status and the association between the two. Sixteen articles from 13 studies were included with the majority cross-sectional in design (n = 9. Some studies used multiple dietary assessment methods with the most common: food records (n = 7, 24-h diet recalls (n = 5, food frequency questionnaires (n = 3 and diet quality assessed by dietary screener (n = 1. Two studies were directly web based, with four studies using technology that could be completed offline and data later transferred. Two studies utilised technology in the collection of dietary data, while the majority (n = 11 automated the collection in combination with nutrient analysis of the dietary data. Four studies provided correlation values between dietary carotenoids with biomarkers, ranging from r = 0.13 to 0.62 with the remaining studies comparing a measure of fruit and vegetable intake with biomarkers (r = 0.09 to 0.25. This review provides an overview of technology-based dietary assessment methods that have been used in validation studies with objectively measured carotenoids. Findings were positive with these dietary assessment measures showing mostly moderate associations with carotenoid biomarkers.

  10. Computer Technology-Integrated Projects Should Not Supplant Craft Projects in Science Education

    Science.gov (United States)

    Klopp, Tabatha J.; Rule, Audrey C.; Schneider, Jean Suchsland; Boody, Robert M.

    2014-01-01

    The current emphasis on computer technology integration and narrowing of the curriculum has displaced arts and crafts. However, the hands-on, concrete nature of craft work in science modeling enables students to understand difficult concepts and to be engaged and motivated while learning spatial, logical, and sequential thinking skills. Analogy…

  11. Radiotracer technology as applied to industry. Final report of a co-ordinated research project 1997-2000

    International Nuclear Information System (INIS)

    2001-12-01

    The Co-ordinated Research Project (CRP) on Radiotracer Technology for Engineering Unit Operation Studies and Unit Process Optimization was carried out by the International Atomic Energy Agency (IAEA) from December 1997 until December 2000. The project developed and validated procedures and protocols for investigation of major industrial processes, including fluidized beds, sugar crystallizers, trickle bed reactors, cement rotary kilns, flotation cells, grinding mills, incinerators, wastewater treatment units and interwell communications in oil fields. This publication is the output of the above mentioned CRP. It provides the principles and state of the art of radiotracer methodology and technology as applied to industry and environment. It is expected to provide wider interest for further development of skills and confidence prior to carrying out field work. It facilitates transfer of technology from developed to developing countries and from nuclear research institutions to industrial end users. The publication could be a suitable guide for radiotracer applications in almost all types of process investigations. The case studies described in this publication deal with typical problems in industry and environment common to all countries. It is intended for radiotracer groups as well as for end engineers and managers from chemical and petrochemical industries, mineral ore and raw material processing, wastewater treatment plants, and other industrial sectors

  12. Validating a measure to assess factors that affect assistive technology use by students with disabilities in elementary and secondary education.

    Science.gov (United States)

    Zapf, Susan A; Scherer, Marcia J; Baxter, Mary F; H Rintala, Diana

    2016-01-01

    The purpose of this study was to measure the predictive validity, internal consistency and clinical utility of the Matching Assistive Technology to Child & Augmentative Communication Evaluation Simplified (MATCH-ACES) assessment. Twenty-three assistive technology team evaluators assessed 35 children using the MATCH-ACES assessment. This quasi-experimental study examined the internal consistency, predictive validity and clinical utility of the MATCH-ACES assessment. The MATCH-ACES assessment predisposition scales had good internal consistency across all three scales. A significant relationship was found between (a) high student perseverance and need for assistive technology and (b) high teacher comfort and interest in technology use (p = (0).002). Study results indicate that the MATCH-ACES assessment has good internal consistency and validity. Predisposition characteristics of student and teacher combined can influence the level of assistive technology use; therefore, assistive technology teams should assess predisposition factors of the user when recommending assistive technology. Implications for Rehabilitation Educational and medical professionals should be educated on evidence-based assistive technology assessments. Personal experience and psychosocial factors can influence the outcome use of assistive technology. Assistive technology assessments must include an intervention plan for assistive technology service delivery to measure effective outcome use.

  13. The beneficial applications of nuclear technology: an educational project to disseminate knowledge and encourage research

    Energy Technology Data Exchange (ETDEWEB)

    Levy, Denise S., E-mail: denise@radioatividades.com.br [Omiccron Programacao Grafica Ltda (Omiccron P.G.), Atibaia, SP (Brazil)

    2013-07-01

    Nuclear technology is part of our everyday life and helps to improve the quality of our lifestyle in more ways than people realize. Nevertheless, the issue divides public opinion in Brazil and worldwide. There is still great misinformation about nuclear technology and peaceful uses of radiation. Most often, the media and social networks associate radiation to nuclear weapons or major accidents. Parents and teachers are often unaware of the matter. Any construction depends on a solid foundation and education is the foundation of every society. This project aims the dissemination of nuclear technology contents for teachers and students of Elementary and Secondary Education throughout Brazil. Whereas Internet access has increased strongly in Brazilian schools, this project provides various web-based short courses about nuclear technology and its beneficial applications in several areas, such as medicine, agriculture, industry and energy. The design, created according to modern concepts, presents different thematic roles which please children and youth. Since this project aims the dissemination of information, all courses are offered to the public at absolutely no cost. Still, the Project will provide a restricted area for teachers, with related material to develop in class. This educational project uses the combination of multiple technologies and last generation internet resources. All content can be accessed from any traditional internet connection, either for computers or mobile technologies. Our goal is to promote the benefits of nuclear technology for new generations, combating misinformation, omission of the media and knowledge fragmentation. Education transforms old prejudices and inspires new thoughts, stimulating development and encouraging scientific and technological research. (author)

  14. The beneficial applications of nuclear technology: an educational project to disseminate knowledge and encourage research

    International Nuclear Information System (INIS)

    Levy, Denise S.

    2013-01-01

    Nuclear technology is part of our everyday life and helps to improve the quality of our lifestyle in more ways than people realize. Nevertheless, the issue divides public opinion in Brazil and worldwide. There is still great misinformation about nuclear technology and peaceful uses of radiation. Most often, the media and social networks associate radiation to nuclear weapons or major accidents. Parents and teachers are often unaware of the matter. Any construction depends on a solid foundation and education is the foundation of every society. This project aims the dissemination of nuclear technology contents for teachers and students of Elementary and Secondary Education throughout Brazil. Whereas Internet access has increased strongly in Brazilian schools, this project provides various web-based short courses about nuclear technology and its beneficial applications in several areas, such as medicine, agriculture, industry and energy. The design, created according to modern concepts, presents different thematic roles which please children and youth. Since this project aims the dissemination of information, all courses are offered to the public at absolutely no cost. Still, the Project will provide a restricted area for teachers, with related material to develop in class. This educational project uses the combination of multiple technologies and last generation internet resources. All content can be accessed from any traditional internet connection, either for computers or mobile technologies. Our goal is to promote the benefits of nuclear technology for new generations, combating misinformation, omission of the media and knowledge fragmentation. Education transforms old prejudices and inspires new thoughts, stimulating development and encouraging scientific and technological research. (author)

  15. Project Morpheus: Lean Development of a Terrestrial Flight Testbed for Maturing NASA Lander Technologies

    Science.gov (United States)

    Devolites, Jennifer L.; Olansen, Jon B.

    2015-01-01

    NASA's Morpheus Project has developed and tested a prototype planetary lander capable of vertical takeoff and landing that is designed to serve as a testbed for advanced spacecraft technologies. The lander vehicle, propelled by a Liquid Oxygen (LOX)/Methane engine and sized to carry a 500kg payload to the lunar surface, provides a platform for bringing technologies from the laboratory into an integrated flight system at relatively low cost. In 2012, Morpheus began integrating the Autonomous Landing and Hazard Avoidance Technology (ALHAT) sensors and software onto the vehicle in order to demonstrate safe, autonomous landing and hazard avoidance. From the beginning, one of goals for the Morpheus Project was to streamline agency processes and practices. The Morpheus project accepted a challenge to tailor the traditional NASA systems engineering approach in a way that would be appropriate for a lower cost, rapid prototype engineering effort, but retain the essence of the guiding principles. This paper describes the tailored project life cycle and systems engineering approach for the Morpheus project, including the processes, tools, and amount of rigor employed over the project's multiple lifecycles since the project began in fiscal year (FY) 2011.

  16. Using smartphone technology to deliver a virtual pedestrian environment: usability and validation.

    Science.gov (United States)

    Schwebel, David C; Severson, Joan; He, Yefei

    2017-09-01

    Various programs effectively teach children to cross streets more safely, but all are labor- and cost-intensive. Recent developments in mobile phone technology offer opportunity to deliver virtual reality pedestrian environments to mobile smartphone platforms. Such an environment may offer a cost- and labor-effective strategy to teach children to cross streets safely. This study evaluated usability, feasibility, and validity of a smartphone-based virtual pedestrian environment. A total of 68 adults completed 12 virtual crossings within each of two virtual pedestrian environments, one delivered by smartphone and the other a semi-immersive kiosk virtual environment. Participants completed self-report measures of perceived realism and simulator sickness experienced in each virtual environment, plus self-reported demographic and personality characteristics. All participants followed system instructions and used the smartphone-based virtual environment without difficulty. No significant simulator sickness was reported or observed. Users rated the smartphone virtual environment as highly realistic. Convergent validity was detected, with many aspects of pedestrian behavior in the smartphone-based virtual environment matching behavior in the kiosk virtual environment. Anticipated correlations between personality and kiosk virtual reality pedestrian behavior emerged for the smartphone-based system. A smartphone-based virtual environment can be usable and valid. Future research should develop and evaluate such a training system.

  17. INTEGRATING GEOSPATIAL TECHNOLOGIES AND SECONDARY STUDENT PROJECTS: THE GEOSPATIAL SEMESTER

    Directory of Open Access Journals (Sweden)

    Bob Kolvoord

    2012-12-01

    Full Text Available Resumen:El Semestre Geoespacial es una actividad de educación geográfica centrada en que los estudiantes del último curso de secundaria en los institutos norteamericanos, adquieran competencias y habilidades específicas en sistemas de información geográfica, GPS y teledetección. A través de una metodología de aprendizaje basado en proyectos, los alumnos se motivan e implican en la realización de trabajos de investigación en los que analizan, e incluso proponen soluciones, diferentes procesos, problemas o cuestiones de naturaleza espacial. El proyecto está coordinado por la Universidad James Madison y lleva siete años implantándose en diferentes institutos del Estado de Virginia, implicando a más de 20 centros educativos y 1.500 alumnos. Los alumnos que superan esta asignatura de la enseñanza secundaria obtienen la convalidación de determinados créditos académicos de la Universidad de referencia.Palabras clave:Sistemas de información geográfica, enseñanza, didáctica de la geografía, semestre geoespacial.Abstract:The Geospatial Semester is a geographical education activity focused on students in their final year of secondary schools in the U.S., acquiring specific skills in GIS, GPS and remote sensing. Through a methodology for project-based learning, students are motivated and involved in conducting research using geographic information systems and analyze, and even propose solutions, different processes, problems or issues spatial in nature. The Geospatial Semester university management not only ensures proper coaching, guidance and GIS training for teachers of colleges, but has established a system whereby students who pass this course of secondary education gain the recognition of certain credits from the University.Key words:Geographic information system, teaching, geographic education, geospatial semester. Résumé:Le semestre géospatial est une activité axée sur l'éducation géographique des étudiants en derni

  18. Validation of the Leap Motion Controller using markered motion capture technology.

    Science.gov (United States)

    Smeragliuolo, Anna H; Hill, N Jeremy; Disla, Luis; Putrino, David

    2016-06-14

    The Leap Motion Controller (LMC) is a low-cost, markerless motion capture device that tracks hand, wrist and forearm position. Integration of this technology into healthcare applications has begun to occur rapidly, making validation of the LMC׳s data output an important research goal. Here, we perform a detailed evaluation of the kinematic data output from the LMC, and validate this output against gold-standard, markered motion capture technology. We instructed subjects to perform three clinically-relevant wrist (flexion/extension, radial/ulnar deviation) and forearm (pronation/supination) movements. The movements were simultaneously tracked using both the LMC and a marker-based motion capture system from Motion Analysis Corporation (MAC). Adjusting for known inconsistencies in the LMC sampling frequency, we compared simultaneously acquired LMC and MAC data by performing Pearson׳s correlation (r) and root mean square error (RMSE). Wrist flexion/extension and radial/ulnar deviation showed good overall agreement (r=0.95; RMSE=11.6°, and r=0.92; RMSE=12.4°, respectively) with the MAC system. However, when tracking forearm pronation/supination, there were serious inconsistencies in reported joint angles (r=0.79; RMSE=38.4°). Hand posture significantly influenced the quality of wrist deviation (P<0.005) and forearm supination/pronation (P<0.001), but not wrist flexion/extension (P=0.29). We conclude that the LMC is capable of providing data that are clinically meaningful for wrist flexion/extension, and perhaps wrist deviation. It cannot yet return clinically meaningful data for measuring forearm pronation/supination. Future studies should continue to validate the LMC as updated versions of their software are developed. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Validation test of advanced technology for IPV nickel-hydrogen flight cells: Update

    Science.gov (United States)

    Smithrick, John J.; Hall, Stephen W.

    1992-01-01

    Individual pressure vessel (IPV) nickel-hydrogen technology was advanced at NASA Lewis and under Lewis contracts with the intention of improving cycle life and performance. One advancement was to use 26 percent potassium hydroxide (KOH) electrolyte to improve cycle life. Another advancement was to modify the state-of-the-art cell design to eliminate identified failure modes. The modified design is referred to as the advanced design. A breakthrough in the low-earth-orbit (LEO) cycle life of IPV nickel-hydrogen cells has been previously reported. The cycle life of boiler plate cells containing 26 percent KOH electrolyte was about 40,000 LEO cycles compared to 3,500 cycles for cells containing 31 percent KOH. The boiler plate test results are in the process of being validated using flight hardware and real time LEO testing at the Naval Weapons Support Center (NWSC), Crane, Indiana under a NASA Lewis Contract. An advanced 125 Ah IPV nickel-hydrogen cell was designed. The primary function of the advanced cell is to store and deliver energy for long-term, LEO spacecraft missions. The new features of this design are: (1) use of 26 percent rather than 31 percent KOH electrolyte; (2) use of a patented catalyzed wall wick; (3) use of serrated-edge separators to facilitate gaseous oxygen and hydrogen flow within the cell, while still maintaining physical contact with the wall wick for electrolyte management; and (4) use of a floating rather than a fixed stack (state-of-the-art) to accommodate nickel electrode expansion due to charge/discharge cycling. The significant improvements resulting from these innovations are: extended cycle life; enhanced thermal, electrolyte, and oxygen management; and accommodation of nickel electrode expansion. The advanced cell design is in the process of being validated using real time LEO cycle life testing of NWSC, Crane, Indiana. An update of validation test results confirming this technology is presented.

  20. UPDATING THE BASIC PRINCIPLES OF PROJECT EDUCATION TECHNOLOGY IN FUTURE MUSIC TEACHERS’ VOCAL AND CHORAL TRAINING

    Directory of Open Access Journals (Sweden)

    Liang Haiye

    2017-04-01

    Full Text Available The article is devoted to characterizing features of implementing project technology into future music teachers’ vocal and choral training. The analysis of scientific papers of outstanding scientists in philosophy, psychology, and art education, which deal with modern directions of using project technology, highlight its role in art education process. A methodological base is supported by considering contemporary scientific researches, in particular the theory and methodology of musical studies in accordance with forming students’ independence in the process of solving educational problems by means of project technology; developing principles of students’ professional training optimization on the basis of project activity; innovative development of future music teachers’ professional training that gives to the presented material novelty and presentable appearance. Studying future music teachers’ vocal and choral training as a process of constructing that has a special purpose of improving the quality descriptions of educational vocal and choral collective sound functioning, the author of the article discloses the basic principles of implementing project technology into future music teachers’ vocal and choral training. The author of the article pays the special attention to revealing specific features and maintenance of project technology in vocal and choral training of future leaders of child's art groups. An emphasis is made on the following basic factors that influence development of students’ creative individuality: constructing projects of their own becoming; setting aims, tasks, strategies and facilities of vocal and choral work; directing to the result; independent creative activity; presentation, reflection and correction of a project. On the basis of the obtained data the following principles of project technology are put forward in future music teachers’ vocal and choral training: principle of independence; principle of

  1. Technology transfer by CDM projects: A comparison of Brazil, China, India and Mexico

    International Nuclear Information System (INIS)

    Dechezlepretre, Antoine; Glachant, Matthieu; Meniere, Yann

    2009-01-01

    In a companion paper [Dechezlepretre, A., Glachant, M., Meniere, Y., 2008. The Clean Development Mechanism and the international diffusion of technologies: An empirical study, Energy Policy 36, 1273-1283], we gave a general description of technology transfers by Clean Development Mechanism (CDM) projects and we analyzed their drivers. In this paper, we use the same data and similar econometric models to explain inter-country differences. We focus on 4 countries gathering about 75% of the CDM projects: Brazil, China, India and Mexico. Sixty eight percent of Mexican projects include an international transfer of technology. The rates are, respectively, 12%, 40% and 59% for India, Brazil and China. Our results show that transfers to Mexico and Brazil are mainly related to the strong involvement of foreign partners and good technological capabilities. Besides a relative advantage with respect to these factors, the higher rate of international transfers in Mexico seems to be due to a sector-composition effect. The involvement of foreign partners is less frequent in India and China, where investment opportunities generated by fast growing economies seem to play a more important role in facilitating international technology transfers through the CDM. International transfers are also related to strong technology capabilities in China. In contrast, the lower rate of international transfer (12%) in India may be due to a better capability to diffuse domestic technologies

  2. Manual on SFR R and D and Technology Monitoring System Based on Enterprise Project Management Solution

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dong Uk; Lee, Yong Bum; Won, Byung Chool; Kim, Young In; Hahn, Do Hee

    2008-04-15

    This report is a manual on enterprise project management solution for R and D and technology monitoring system that is applicable for managing the generation IV sodium-cooled fast reactor development. The prime goal of this system is to provide project manager with reliable and accurate information of status of progress, performance and resource allocation, and attain traceability and visibility of project implementation for effective project management. This report is composed of the three part. The first part is an introduction on microsoft project professional software that was used to monitor the progress, evaluate the results and analyze the resource distribution of the activities. The second makes a description of project plan and control, and the third part describes on collaboration and teamwork.

  3. Manual on SFR R and D and Technology Monitoring System Based on Enterprise Project Management Solution

    International Nuclear Information System (INIS)

    Lee, Dong Uk; Lee, Yong Bum; Won, Byung Chool; Kim, Young In; Hahn, Do Hee

    2008-04-01

    This report is a manual on enterprise project management solution for R and D and technology monitoring system that is applicable for managing the generation IV sodium-cooled fast reactor development. The prime goal of this system is to provide project manager with reliable and accurate information of status of progress, performance and resource allocation, and attain traceability and visibility of project implementation for effective project management. This report is composed of the three part. The first part is an introduction on microsoft project professional software that was used to monitor the progress, evaluate the results and analyze the resource distribution of the activities. The second makes a description of project plan and control, and the third part describes on collaboration and teamwork

  4. Expansion of Michigan EOR Operations Using Advanced Amine Technology at a 600 MW Project Wolverine Carbon Capture and Storage Project

    Energy Technology Data Exchange (ETDEWEB)

    H Hoffman; Y kishinevsky; S. Wu; R. Pardini; E. Tripp; D. Barnes

    2010-06-16

    Wolverine Power Supply Cooperative Inc, a member owned cooperative utility based in Cadillac Michigan, proposes to demonstrate the capture, beneficial utilization and storage of CO{sub 2} in the expansion of existing Enhanced Oil Recovery operations. This project is being proposed in response to the US Department of Energy Solicitation DE-FOA-0000015 Section III D, 'Large Scale Industrial CCS projects from Industrial Sources' Technology Area 1. The project will remove 1,000 metric tons per day of CO{sub 2} from the Wolverine Clean Energy Venture 600 MW CFB power plant owned and operated by WPC. CO{sub 2} from the flue gas will be captured using Hitachi's CO{sub 2} capture system and advanced amine technology. The capture system with the advanced amine-based solvent supplied by Hitachi is expected to significantly reduce the cost and energy requirements of CO{sub 2} capture compared to current technologies. The captured CO{sub 2} will be compressed and transported for Enhanced Oil Recovery and CO{sub 2} storage purposes. Enhanced Oil Recovery is a proven concept, widely used to recover otherwise inaccessible petroleum reserves. While post-combustion CO{sub 2} capture technologies have been tested at the pilot scale on coal power plant flue gas, they have not yet been demonstrated at a commercial scale and integrated with EOR and storage operations. Amine-based CO{sub 2} capture is the leading technology expected to be available commercially within this decade to enable CCS for utility and industrial facilities firing coal and waste fuels such as petroleum coke. However, traditional CO{sub 2} capture process utilizing commercial amine solvents is very energy intensive for regeneration and is also susceptible to solvent degradation by oxygen as well as SOx and NO{sub 2} in the flue gas, resulting in large operating costs. The large volume of combustion flue gas with its low CO{sub 2} concentration requires large equipment sizes, which together with the

  5. Fire-Protection Research for Energy-Technology Projects: FY 1981 year-end report

    International Nuclear Information System (INIS)

    Hasegawa, H.K.; Alvares, N.J.; Lipska-Quinn, A.E.; Beason, D.G.; Foote, K.L.; Priante, S.J.

    1982-01-01

    This report summarizes research conducted in fiscal year 1981 for the DOE-supported project, Fire Protection Research for Energy Technology Projects. Initiated in 1977, this ongoing research program was conceived to advance fire protection strategies for Energy Technology Projects to keep abreast of the unique fire problems that are developing with the complexity of energy technology research. We are developing an analytical methodology through detailed study of fusion energy experiments at Lawrence Livermore National Laboratory (LLNL). Employing these facilities as models for methodology development, we are simultaneously advancing three major task areas: (1) determination of unique fire hazards of current fusion energy facilities; (2) evaluation of the ability of accepted fire management measures to meet and negate hazards; and (3) performance of unique research into problem areas we have identified to provide input into analytical fire-growth and damage-assessment models

  6. Fire-Protection Research for Energy-Technology Projects: FY 1981 year-end report

    Energy Technology Data Exchange (ETDEWEB)

    Hasegawa, H.K.; Alvares, N.J.; Lipska-Quinn, A.E.; Beason, D.G.; Foote, K.L.; Priante, S.J.

    1982-07-20

    This report summarizes research conducted in fiscal year 1981 for the DOE-supported project, Fire Protection Research for Energy Technology Projects. Initiated in 1977, this ongoing research program was conceived to advance fire protection strategies for Energy Technology Projects to keep abreast of the unique fire problems that are developing with the complexity of energy technology research. We are developing an analytical methodology through detailed study of fusion energy experiments at Lawrence Livermore National Laboratory (LLNL). Employing these facilities as models for methodology development, we are simultaneously advancing three major task areas: (1) determination of unique fire hazards of current fusion energy facilities; (2) evaluation of the ability of accepted fire management measures to meet and negate hazards; and (3) performance of unique research into problem areas we have identified to provide input into analytical fire-growth and damage-assessment models.

  7. New technologies for ammonium dinitramide based monopropellant thrusters - The project RHEFORM

    Science.gov (United States)

    Negri, Michele; Wilhelm, Marius; Hendrich, Christian; Wingborg, Niklas; Gediminas, Linus; Adelöw, Leif; Maleix, Corentin; Chabernaud, Pierre; Brahmi, Rachid; Beauchet, Romain; Batonneau, Yann; Kappenstein, Charles; Koopmans, Robert-Jan; Schuh, Sebastian; Bartok, Tobias; Scharlemann, Carsten; Gotzig, Ulrich; Schwentenwein, Martin

    2018-02-01

    New technologies are developed in the project RHEFORM to enable the replacement of hydrazine with liquid propellants based on ammonium dinitramide (ADN). The replacement of hydrazine with green propellants will make space propulsion more sustainable and better suitable for the requirements of future missions. In the RHEFORM project investigation on the composition of the propellants are conducted to enable the use of materials for catalysts and combustion chambers which are not subject to the International Traffic in Arms Regulations (ITAR). New igniters are under development aiming at a reduction of required energy and a more prompt ignition. Two different types of igniters are considered: improved catalytic igniters and thermal igniters. The technologies developed in RHEFORM will be implemented in two thruster demonstrators, aiming at a technology readiness level (TRL) of 5. In the present work the results obtained in the first half of the project are presented.

  8. Impact of Recent Trends in Information and Communication Technology on the Validity of the Construct Information Literacy in Higher Education

    NARCIS (Netherlands)

    A.A.J. (Jos) van Helvoort

    2010-01-01

    The objective of this paper is a reflective discussion on the validity of the construct Information Literacy in the perspective of changing information and communication technologies. The research question that will be answered is: what is the impact of technological developments on the relevance of

  9. Development and Validation of the Computer Technology Literacy Self-Assessment Scale for Taiwanese Elementary School Students

    Science.gov (United States)

    Chang, Chiung-Sui

    2008-01-01

    The purpose of this study was to describe the development and validation of an instrument to identify various dimensions of the computer technology literacy self-assessment scale (CTLS) for elementary school students. The instrument included five CTLS dimensions (subscales): the technology operation skills, the computer usages concepts, the…

  10. Applications of EOR (enhanced oil recovery) technology in field projects--1990 update

    Energy Technology Data Exchange (ETDEWEB)

    Pautz, J.F.; Thomas, R.D.

    1991-01-01

    Trends in the type and number of US enhanced oil recovery (EOR) projects are analyzed for the period from 1980 through 1989. The analysis is based on current literature and news media and the Department of Energy (DOE) EOR Project Data Base, which contains information on over 1,348 projects. The characteristics of the EOR projects are grouped by starting date and process type to identify trends in reservoir statistics and applications of process technologies. Twenty-two EOR projects starts were identified for 1989 and ten project starts for 1988. An obvious trend over recent years has been the decline in the number of project starts since 1981 until 1988 which corresponds to the oil price decline during that period. There was a modest recovery in 1989 of project starts, which lags the modest recovery of oil prices in 1987 that was reconfirmed in 1989. During the time frame of 1980 to 1989, there has been a gradual improvement in costs of operation for EOR technology. The perceived average cost of EOR has gone down from a $30/bbl range to low $20/bbl. These costs of operation seems to stay just at the price of oil or slightly above to result in marginal profitability. The use of polymer flooding has drastically decreased both in actual and relative numbers of project starts since the oil price drop in 1986. Production from polymer flooding is down more than 50%. Long-term plans for large, high-cost projects such as CO{sub 2} flooding in West Texas, steamflooding in California, and hydrocarbon flooding on the North Slope have continued to be implemented. EOR process technologies have been refined to be more cost effective as shown by the continued application and rising production attributable to EOR. 8 refs., 6 figs., 13 tabs.

  11. RF Phase Reference Distribution System for the TESLA Technology Based Projects

    CERN Document Server

    Czuba, K; Romaniuk, R S

    2013-01-01

    Since many decades physicists have been building particle accelerators and usually new projects became more advanced, more complicated and larger than predecessors. The importance and complexity of the phase reference distribution systems used in these accelerators have grown significantly during recent years. Amongst the most advanced of currently developed accelerators are projects based on the TESLA technology. These projects require synchronization of many RF devices with accuracy reaching femtosecond levels over kilometre distances. Design of a phase reference distribution system fulfilling such requirements is a challenging scientific task. There are many interdisciplinary problems which must be solved during the system design. Many, usually negligible issues, may became very important in such system. Furthermore, the design of a distribution system on a scale required for the TESLA technology based projects is a new challenge and there is almost no literature sufficiently covering this subject. This th...

  12. Key Technologies of the Hydraulic Structures of the Three Gorges Project

    Directory of Open Access Journals (Sweden)

    Xinqiang Niu

    2016-09-01

    Full Text Available To date, the Three Gorges Project is the largest hydro junction in the world. It is the key project for the integrated water resource management and development of the Changjiang River. The technology of the project, with its huge scale and comprehensive benefits, is extremely complicated, and the design difficulty is greater than that of any other hydro project in the world. A series of new design theories and methods have been proposed and applied in the design and research process. Many key technological problems regarding hydraulic structures have been overcome, such as a gravity dam with multi-layer large discharge orifices, a hydropower station of giant generating units, and a giant continual multi-step ship lock with a high water head.

  13. Construction and validation of a tool to Assess the Use of Light Technologies at Intensive Care Units 1

    Science.gov (United States)

    Marinho, Pabliane Matias Lordelo; Campos, Maria Pontes de Aguiar; Rodrigues, Eliana Ofélia Llapa; Gois, Cristiane Franca Lisboa; Barreto, Ikaro Daniel de Carvalho

    2016-01-01

    ABSTRACT Objective: to construct and validate a tool to assess the use of light technologies by the nursing team at Intensive Care Units. Method: methodological study in which the tool was elaborated by means of the psychometric method for construction based on the categorization of health technologies by Merhy and Franco, from the National Humanization Policy, using the Nursing Intervention Classification taxonomy to categorize the domains of the tool. Agreement Percentages and Content Validity Indices were used for the purpose of validation. Results: The result of the application of the Interrater Agreement Percentage exceeded the recommended level of 80%, highlighting the relevance for the proposed theme in the assessment, with an agreement rate of 99%. Conclusion: the tool was validated with four domains (Bond, Autonomy, Welcoming and Management) and nineteen items that assess the use of light technologies at Intensive Care Units. PMID:27992025

  14. Use of communication technologies in document exchange for the management of construction projects

    Science.gov (United States)

    Mesároš, Peter; Mandičák, Tomáš

    2016-06-01

    Information and communication technologies represent a set of people, processes, technical and software tools providing collection, transport, storage and processing of data for distribution and presentation of information. Particularly communication systems are the main tool for information exchange. Of the other part, these technologies have a broad focus and use. One of them is the exchange of documents in the management of construction projects. Paper discusses the issue of exploitation level of communication technologies in construction project management. The main objective of this paper is to analyze exploitation level of communication technologies. Another aim of the paper is to compare exploitation level or rate of document exchange by electronic communication devices and face-to-face communication.

  15. Use of communication technologies in document exchange for the management of construction projects

    Directory of Open Access Journals (Sweden)

    Mesároš Peter

    2016-06-01

    Full Text Available Information and communication technologies represent a set of people, processes, technical and software tools providing collection, transport, storage and processing of data for distribution and presentation of information. Particularly communication systems are the main tool for information exchange. Of the other part, these technologies have a broad focus and use. One of them is the exchange of documents in the management of construction projects. Paper discusses the issue of exploitation level of communication technologies in construction project management. The main objective of this paper is to analyze exploitation level of communication technologies. Another aim of the paper is to compare exploitation level or rate of document exchange by electronic communication devices and face-to-face communication.

  16. TANK FARM REMEDIATION TECHNOLOGY DEVELOPMENT PROJECT AN EXERCISE IN TECHNICAL & REGULATORY COLLABORATION

    Energy Technology Data Exchange (ETDEWEB)

    JARAYSI, M.N.

    2007-01-08

    The Tank Farm Remediation Technology Development Project at the Hanford Site focuses on waste storage tanks, pipelines and associated ancillary equipment that are part of the C-200 single-shell tank (SST) farm system located in the C Tank Farm. The purpose of the project is to obtain information on the implementation of a variety of closure activities and to answer questions on technical, operational and regulatory issues associated with closure.

  17. Accompanying technology development in the Human Brain Project: From foresight to ethics management

    OpenAIRE

    Aicardi, C.; Fothergill, B. Tyr; Rainey, Stephen; Stahl, Bernd Carsten, 1968-; Harris, E.

    2018-01-01

    Open access article This paper addresses the question of managing the existential risk potential of general Artificial Intelligence (AI), as well as the more near-term yet hazardous and disruptive implications of specialised AI, from the perspective of a particular research project that could make a significant contribution to the development of Artificial Intelligence (AI): the Human Brain Project (HBP), a ten year Future and Emerging Technologies Flagship of the European Commission. The ...

  18. TANK FARM REMEDIATION TECHNOLOGY DEVELOPMENT PROJECT AN EXERCISE IN TECHNICAL and REGULATORY COLLABORATION

    International Nuclear Information System (INIS)

    JARAYSI, M.N.

    2007-01-01

    The Tank Farm Remediation Technology Development Project at the Hanford Site focuses on waste storage tanks, pipelines and associated ancillary equipment that are part of the C-200 single-shell tank (SST) farm system located in the C Tank Farm. The purpose of the project is to obtain information on the implementation of a variety of closure activities and to answer questions on technical, operational and regulatory issues associated with closure

  19. Technology News; Distance Education Project: Extending Extension Programming via Telecommunications Technology; [and] Fax for Library Services.

    Science.gov (United States)

    Coyle, Larry; Spitzer, Kathleen L.

    1992-01-01

    Three articles discuss (1) the numbers of microcomputers installed in elementary and secondary schools; (2) a distance education project in the Minnesota Extension Service that used a satellite delivery system and integrated it with a computer information network; and (3) the use of facsimile machines for library services. (LRW)

  20. Pacific Northwest Smart Grid Demonstration Project Technology Performance Report Volume 1: Technology Performance

    Energy Technology Data Exchange (ETDEWEB)

    Melton, Ron [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-06-01

    The Pacific Northwest Smart Grid Demonstration (PNWSGD), a $179 million project that was co-funded by the U.S. Department of Energy (DOE) in late 2009, was one of the largest and most comprehensive demonstrations of electricity grid modernization ever completed. The project was one of 16 regional smart grid demonstrations funded by the American Recovery and Reinvestment Act. It was the only demonstration that included multiple states and cooperation from multiple electric utilities, including rural electric co-ops, investor-owned, municipal, and other public utilities. No fewer than 55 unique instantiations of distinct smart grid systems were demonstrated at the projects’ sites. The local objectives for these systems included improved reliability, energy conservation, improved efficiency, and demand responsiveness. The demonstration developed and deployed an innovative transactive system, unique in the world, that coordinated many of the project’s distributed energy resources and demand-responsive components. With the transactive system, additional regional objectives were also addressed, including the mitigation of renewable energy intermittency and the flattening of system load. Using the transactive system, the project coordinated a regional response across the 11 utilities. This region-wide connection from the transmission system down to individual premises equipment was one of the major successes of the project. The project showed that this can be done and assets at the end points can respond dynamically on a wide scale. In principle, a transactive system of this type might eventually help coordinate electricity supply, transmission, distribution, and end uses by distributing mostly automated control responsibilities among the many distributed smart grid domain members and their smart devices.

  1. The Application of Persuasive Technology to educational settings: Some theoretical from the HANDS Project

    DEFF Research Database (Denmark)

    Mintz, Joseph; Aagaard, Morten

    2010-01-01

    In the HANDS project Persuasive Technology is applied in an educational context in special schools for children with autism, in which social skills development is the aim of the persuasion. We consider how in such educational settings the interventions can be theorized in the context of existing...... educational paradigms. We discuss the relation between such paradigms and persuasive technology, and the specific case of persuasion in the pedagogical context of children with autism....

  2. Residential Energy Efficiency Demonstration: Hawaii and Guam Energy Improvement Technology Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Earle, L. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sparn, B. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Rutter, A. [Sustainability Solutions LLC (Guam); Briggs, D. [Naval Base Guam, Santa Rita (Guam)

    2014-03-01

    In order to meet its energy goals, the Department of Defense (DOD) has partnered with the Department of Energy (DOE) to rapidly demonstrate and deploy cost-effective renewable energy and energy-efficiency technologies. The scope of this project was to demonstrate tools and technologies to reduce energy use in military housing, with particular emphasis on measuring and reducing loads related to consumer electronics (commonly referred to as 'plug loads'), hot water, and whole-house cooling.

  3. WEB 2.0 SERVICES AS A TECHNOLOGICAL FOUNDATION OF A NETWORK PROJECT

    Directory of Open Access Journals (Sweden)

    Tatiana Ivanovna Kanyanina

    2015-02-01

    Full Text Available In the light of the requirements of the federal state educational standard increases the value of the network design based on the use of Web 2.0 services. The article outlines the range of technological challenges faced by the developer of the network project, such as the choice of the network platform of the project, design tools and tools for project results placement, project coordination and organization of communication lines, the choice of instruments for the promotion of the project on the Internet. The main attention is focused on the examples of network services that address these challenges, and describe their features. The authors rely on the specific network projects implemented in Nizhny Novgorod region. The paper analyzes the possible project’s network sites (network environment. The article gives a general description of each environment, marks its distinctive features, advantages and disadvantages. The article presents project tasks’ examples, designed on the basis of the variety of Web 2.0 services that functionally meet the requirements of a particular task, examples of services to represent the project products and to summarize its results. Attention is paid to the organization of the lines of communication of the project participants and organizers and to the role of network services in the project promotion on the Internet.

  4. Pittsburgh Science Technology Society Project: Instruction Modules. Interrelationships Science--Technology--Society.

    Science.gov (United States)

    O'Brien, George, Ed.

    This collection of instruction modules studies the interactions of science, technology, and society (STS) using five activity sets. The introduction module includes activities which show students the STS relationships in their world, develop good organizational skills, develop an understanding of who and what a scientist is, develop graphing…

  5. Management of a science and technology popularization project in the nuclear area

    International Nuclear Information System (INIS)

    Soares, Wellington Antonio; Maretti Junior, Fausto

    2007-01-01

    The goal of this paper is to show the management results of the 2005-2007 project 'Nuclear energy: itinerant expositions' sponsored by the Foundation for Research Support of Minas Gerais (FAPEMIG), a state agency, in a science and technology popularization program. The project coordinated by the Nuclear Technology Development Center (CDTN/CNEN) in partnership with the Minas Commerce Association (ACMinas) was designed to students from public high school of the Belo Horizonte metropolitan region. It consisted of an exposition and a previous talk motivating the audience to the nuclear technology in connection with subjects taught at schools, like physics, chemistry, biology, mathematics, history, etc. Small scale models of nuclear and radioactive installations, irradiated food and fruits samples and colored gems by gamma rays were presented at the stand exposition. Designing, performing and evaluating the project required the following activities: searching of information on the target public, infrastructure mounting, team training, multimedia material elaboration, strategy for dealing with the students, talk presentation, distribution of booklet on nuclear themes, reception at the exposition, interviews with students and teachers by journalists, evaluation of the project by the schools, evaluation of the project by some students three months after the event and also reporting the project to the media. About forty people of CDTN took part in the project that reached thirty high schools and encompassed about 11,000 students. About five hundred state high school teachers of chemistry, physics and biology were reached by the experience of the project in a specialization course given by a local university. Only high approval was received by the project in the returned questionnaires. (author)

  6. Measuring technology self efficacy: reliability and construct validity of a modified computer self efficacy scale in a clinical rehabilitation setting.

    Science.gov (United States)

    Laver, Kate; George, Stacey; Ratcliffe, Julie; Crotty, Maria

    2012-01-01

    To describe a modification of the computer self efficacy scale for use in clinical settings and to report on the modified scale's reliability and construct validity. The computer self efficacy scale was modified to make it applicable for clinical settings (for use with older people or people with disabilities using everyday technologies). The modified scale was piloted, then tested with patients in an Australian inpatient rehabilitation setting (n = 88) to determine the internal consistency using Cronbach's alpha coefficient. Construct validity was assessed by correlation of the scale with age and technology use. Factor analysis using principal components analysis was undertaken to identify important constructs within the scale. The modified computer self efficacy scale demonstrated high internal consistency with a standardised alpha coefficient of 0.94. Two constructs within the scale were apparent; using the technology alone, and using the technology with the support of others. Scores on the scale were correlated with age and frequency of use of some technologies thereby supporting construct validity. The modified computer self efficacy scale has demonstrated reliability and construct validity for measuring the self efficacy of older people or people with disabilities when using everyday technologies. This tool has the potential to assist clinicians in identifying older patients who may be more open to using new technologies to maintain independence.

  7. Experiences of technology-rich innovation in European schools within the Open Discovery Space project

    Directory of Open Access Journals (Sweden)

    Sonia PEINADO

    2015-11-01

    Full Text Available The Open Discovery Space (ODS project was conceived to introduce innovative resource-based teaching and learning practices in European schools, to promote the creation of communities between European school members and to boost the demand for open educational resources among teachers. After 3 years of applying the ODS innovation model, more than 2,000 European schools have carried out diverse experiences of technology-rich innovation to achieve the project aims. This paper describes the experiences and results of ODS in 7 different European countries, along with the international activities that aim at expanding the scope of the project beyond the European limits.

  8. Ceramic technology for advanced heat engines project: Semiannual progress report for April through September 1986

    Energy Technology Data Exchange (ETDEWEB)

    1987-03-01

    An assessment of needs was completed, and a five-year project plan was developed with extensive input from private industry. Objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines.

  9. Synthesizing R&D Data: Experiences from the Integrated Manufacturing Technology Roadmap (IMTR) Project

    Energy Technology Data Exchange (ETDEWEB)

    merrell, m.a.

    1999-05-05

    IMTR is a tremendous undertaking to assess the current state and future needs of Manufacturing Technology R&D. A follow-on project to the roadmaps is the development and populating of a Gap Analysis database containing current R&D abstracts related to the roadmaps' technical elements. Efficiently identifying the R&D projects within scope presents many travails of synthesizing data from across a wide spectrum. Challenges to this project were directly proportional to the lack of single-source data collections.

  10. The NASA In-Space Propulsion Technology Project's Current Products and Future Directions

    Science.gov (United States)

    Anderson, David J.; Dankanich, John; Munk, Michelle M.; Pencil, Eric; Liou, Larry

    2010-01-01

    Since its inception in 2001, the objective of the In-Space Propulsion Technology (ISPT) project has been developing and delivering in-space propulsion technologies that enable or enhance NASA robotic science missions. These in-space propulsion technologies are applicable, and potentially enabling for future NASA flagship and sample return missions currently under consideration, as well as having broad applicability to future Discovery and New Frontiers mission solicitations. This paper provides status of the technology development, applicability, and availability of in-space propulsion technologies that recently completed, or will be completing within the next year, their technology development and are ready for infusion into missions. The paper also describes the ISPT project s future focus on propulsion for sample return missions. The ISPT technologies completing their development are: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance for lower cost; 2) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 3) aerocapture technologies which include thermal protection system (TPS) materials and structures, guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; and atmospheric and aerothermal effect models. The future technology development areas for ISPT are: 1) Planetary Ascent Vehicles (PAV); 2) multi-mission technologies for Earth Entry Vehicles (MMEEV) needed for sample return missions from many different destinations; 3) propulsion for Earth Return Vehicles (ERV) and transfer stages, and electric propulsion for sample return and low cost missions; 4) advanced propulsion technologies for sample return; and 5) Systems/Mission Analysis focused on sample return propulsion.

  11. The Cubesat Radiometer Radio Frequency Interference Technology Validation (CubeRRT) Mission

    Science.gov (United States)

    Misra, S.; Johnson, J. T.; Ball, C.; Chen, C. C.; Smith, G.; McKelvey, C.; Andrews, M.; O'Brien, A.; Kocz, J.; Jarnot, R.; Brown, S. T.; Piepmeier, J. R.; Lucey, J.; Miles, L. R.; Bradley, D.; Mohammed, P.

    2016-12-01

    Passive microwave measurements made below 40GHz have experienced increased amounts of man-made radio frequency interference (RFI) over the past couple of decades. Such RFI has had a degenerative impact on various important geophysical retrievals such as soil-moisture, sea-surface salinity, atmospheric water vapor, precipitation etc. The commercial demand for spectrum allocation has increased over the past couple of years - infringing on frequencies traditionally reserved for scientific uses such as Earth observation at passive microwave frequencies. With the current trend in shared spectrum allocations, future microwave radiometers will have to co-exist with terrestrial RFI sources. The CubeSat Radiometer Radio Frequency Interference Technology Validation (CubeRRT) mission is developing a 6U Cubesat system to demonstrate RFI detection and filtering technologies for future microwave radiometer remote sensing missions. CubeRRT will operate between 6-40GHz, and demonstrate on-board real-time RFI detection on Earth brightness temperatures tuned over 1GHz steps. The expected launch date for CubeRRT is early 2018. Digital subsystems for higher frequency microwave radiometry require a larger bandwidth, as well as more processing power and on-board operation capabilities for RFI filtering. Real-time and on-board RFI filtering technology development is critical for future missions to allow manageable downlink data volumes. The enabling CubeRRT technology is a digital FPGA-based spectrometer with a bandwidth of 1 GHz that is capable of implementing advanced RFI filtering algorithms that use the kurtosis and cross-frequency RFI detection methods in real-time on board the spacecraft. The CubeRRT payload consists of 3 subsystems: a wideband helical antenna, a tunable analog radiometer subsystem, and a digital backend. The following presentation will present an overview of the system and results from the latest integration and test.

  12. Ceramic Technology Project, semiannual progress report for October 1993 through March 1994

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1994-09-01

    The Ceramic Technology Project was originally developed by the Department of Energy`s Office of Transportation Systems (OTS) in Conservation and Renewable Energy. Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. An assessment of needs was completed, and a five-year project plan was developed with extensive input from private industry. In July 1990, the original plan was updated through the estimated completion of development in 1993. The original objective of the project was to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. During the course of the Ceramic Technology Project, remarkable progress has been made in the development of reliable structural ceramics. The direction of the Ceramic Technology Project is now shifting toward reducing the cost of ceramics to facilitate commercial introduction of ceramic components for near-term engine applications. In response to extensive input from industry, the plan is to extend the engine types which were previously supported (advanced gas turbine and low-heat-rejection diesel engines) to include near-term (5-10 years) applications in conventional automobile and diesel truck engines. To facilitate the rapid transfer of this technology to U.S. industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. A systematic approach to reducing the cost of components is envisioned.

  13. Projects from Federal Region IX: Department of Energy Appropriate Energy Technology Program. Part II

    Energy Technology Data Exchange (ETDEWEB)

    Case, C.W.; Clark, H.R.; Kay, J.; Lucarelli, F.B.; Rizer, S.

    1980-01-01

    Details and progress of appropriate energy technology programs in Region IX are presented. In Arizona, the projects are Solar Hot Water for the Prescott Adult Center and Solar Prototype House for a Residential Community. In California, the projects are Solar AquaDome Demonstration Project; Solar Powered Liquid Circulating Pump; Appropriate Energy Technology Resource Center; Digester for Wastewater Grown Aquatic Plants; Performance Characteristics of an Anaerobic Wastewater Lagoon Primary Treatment System; Appropriate Energy/Energy Conservation Demonstration Project; Solar Energy for Composting Toilets; Dry Creek Rancheria Solar Demonstration Projects; Demonstration for Energy Retrofit Analysis and Implementation; and Active Solar Space Heating System for the Integral Urban House. In Hawaii, the projects are: Java Plum Electric; Low-Cost Pond Digesters for Hawaiian Pig Farm Energy Needs; Solar Beeswax Melter; Methane Gas Plant for Operating Boilers and Generating Steam; and Solar Water Heating in Sugarcane Seed-Treatment Plants. A Wind-Powered Lighted Navigation Buoys Project for Guam is also described. A revised description of the Biogas Energy for Hawaiian Small Farms and Homesteads is given in an appendix.

  14. Investments in information systems and technology in the healthcare: Project management mediation

    Directory of Open Access Journals (Sweden)

    Jorge Gomes

    2017-03-01

    Full Text Available Healthcare organisations must improve their business practices and internal procedures in order to answer the increasing demand of health professionals and the general public for more and better information. Hospitals invest massively in information systems and technology (IS/IT in the hope that these investments will improve healthcare and meet patients’ demands. The main objective of our research is to study how organisational maturity, enhanced by investments in IS/IT, project management and best practices, leads to successful projects in public healthcare organisations. The rational of our model is that organisational maturity has a positive effect on IS/IT project success, and that this success is also positively enhanced by the use of project management practices. We emphasise that this combination of approaches can increase the effectiveness of projects. Furthermore, it can also improve the confidence that the results of investments will meet stakeholders’ expectations.

  15. The use of a cubesat to validate technological bricks in space

    Science.gov (United States)

    Rakotonimbahy, E.; Vives, S.; Dohlen, K.; Savini, G.; Iafolla, V.

    2017-11-01

    In the framework of the FP7 program FISICA (Far Infrared Space Interferometer Critical Assessment), we are developing a cubesat platform which will be used for the validation in space of two technological bricks relevant for FIRI. The first brick is a high-precision accelerometer which could be used in a future space mission as fundamental element for the dynamic control loop of the interferometer. The second brick is a miniaturized version of an imaging multi-aperture telescope. Ultimately, such an instrument could be composed of numerous space-born mirror segments flying in precise formation on baselines of hundreds or thousands of meters, providing high-resolution glimpses of distant worlds. We are proposing to build a very first space-born demonstrator of such an instrument which will fit into the limited resources of one cubesat. In this paper, we will describe the detailed design of the cubesat hosting the two payloads.

  16. Remotely Accessible Instrumented Monitoring of Global Development Programs: Technology Development and Validation

    Directory of Open Access Journals (Sweden)

    Michael Fleming

    2013-08-01

    Full Text Available Many global development agencies self-report their project outcomes, often relying on subjective data that is collected sporadically and communicated months later. These reports often highlight successes and downplay challenges. Instrumented monitoring via distributed data collection platforms may provide crucial evidence to help inform the sector and public on the effectiveness of aid, and the on-going challenges. This paper presents the process of designing and validating an integrated sensor platform with cellular-to-internet reporting purposely targeted at global development programs. The integrated hardware platform has been applied to water, sanitation, energy and infrastructure interventions and validated through laboratory calibration and field observations. Presented here are two examples: a water pump and a household water filter, wherein field observations agreed with the data algorithm with a linear fit slope of between 0.91 and 1, and an r-squared of between 0.36 and 0.39, indicating a wide confidence interval but with low overall error (i.e., less than 0.5% in the case of structured field observations of water volume added to a household water filter and few false negatives or false positives.

  17. Technology status in support of refined technical baseline for the Spent Nuclear Fuel project. Revision 1

    International Nuclear Information System (INIS)

    Puigh, R.J.; Toffer, H.; Heard, F.J.; Irvin, J.J.; Cooper, T.D.

    1995-01-01

    The Spent Nuclear Fuel Project (SNFP) has undertaken technology acquisition activities focused on supporting the technical basis for the removal of the N Reactor fuel from the K Basins to an interim storage facility. The purpose of these technology acquisition activities has been to identify technology issues impacting design or safety approval, to establish the strategy for obtaining the necessary information through either existing project activities, or the assignment of new work. A set of specific path options has been identified for each major action proposed for placing the N Reactor fuel into a ''stabilized'' form for interim storage as part of this refined technical basis. This report summarizes the status of technology information acquisition as it relates to key decisions impacting the selection of specific path options. The following specific categories were chosen to characterize and partition the technology information status: hydride issues and ignition, corrosion, hydrogen generation, drying and conditioning, thermal performance, criticality and materials accountability, canister/fuel particulate behavior, and MCO integrity. This report represents a preliminary assessment of the technology information supporting the SNFP. As our understanding of the N Reactor fuel performance develops the technology information supporting the SNFP will be updated and documented in later revisions to this report. Revision 1 represents the incorporation of peer review comments into the original document. The substantive evolution in our understanding of the technical status for the SNFP (except section 3) since July 1995 have not been incorporated into this revision

  18. THE APPLICATION OF FORESIGHT PROJECTS IN FORMATION OF TECHNOLOGICAL COMPANIES’ INNOVATION DEVELOPMENT STRATEGY

    Directory of Open Access Journals (Sweden)

    M. E. Zolotareva

    2016-01-01

    Full Text Available In the article is considered the possibility of application of methodology of foresight to the formation of strategy of innovative development of technological companies. The application of existing approaches to defining targets and goals of innovation development does not meet the requirements of the nonlinearity of the modern processes of technological companies’ innovation development.The goals and objectives. The purpose of this article is to study the possibilities of application of methods of foresight in forming of technological companies’ innovation development strategy. To achieve the goal, the author has solved the following problems: considered the interrelationship and interdependence between corporate strategy and technological companies’ innovation development strategy; defined the main problems of formation technological companies’ innovation development strategies; revealed the concept of "foresight" and diff erence in methodology of foresight and traditional forecasting techniques; defined the basic principles of foresight; presents the main stages of the foresight project implementation in technological companies.Research methods. The theoretical basis of the study are the publications of Russian and foreign scientists in the field of formation and development of innovation strategies through the application of foresight methods at the level of national innovation system and at company level. As a methodological basis of the study used methods of analysis, synthesis, induction method, deduction method, the comparison, was applied certain aspects of the synergetic analysis.Summary. The results of Russian and foreign researchers systematized by author confirm the possibility and necessity foresight projects implementation in formation and adjustment of technological companies’ innovation development strategies and in the national innovation system development. The principles of engagement of various social forces

  19. Bilişim Teknolojisi Projelerinde Reel Opsiyonlar (Real Options in Information Technology Projects

    Directory of Open Access Journals (Sweden)

    İpek Deveci KOCAKOÇ

    2009-10-01

    Full Text Available Many sources such as the immaturity, complexity and unpredictable evolution of the technologies themselves, and the difficulty of predicting the market demand generally cause uncertainty in the Information Technology (IT projects. Managerial flexibility has value in the context of uncertain IT projects, as management can continuously gather information about uncertain project and market characteristics and, based on this information, change its course of action. As traditional capital budgeting (or project appraisal approaches fail to consider embedded managerial flexibility in projects, the new investment evaluation approach called “real options” has come on the scene recently. “Options thinking,” an emerging investment management philosophy based on the theory of financial options can provide a promising foundation for hedging the risks under uncertainty. This paper aims at analyzing a real IT investment having growth opportunities by using real options approach. Specifically, the value of investing in a software project as well as embedded flexibility in this opportunity is modeled as an option contract. The expected costs required for completing the project and thereafter the resulting asset value are considered as the base-case parameters of this contract. Option values derived from Binomial method are used for evaluating the project and the optimal investment policy is determined based on these values. As a result, it is shown that the value of an IT project having flexibility can differ from one obtained with traditional capital budgeting methods and a rejected project which was seen as unprofitable before can turn a profitable one through embedded flexibilities.

  20. A systematic review of the characteristics and validity of monitoring technologies to assess Parkinson's disease.

    Science.gov (United States)

    Godinho, Catarina; Domingos, Josefa; Cunha, Guilherme; Santos, Ana T; Fernandes, Ricardo M; Abreu, Daisy; Gonçalves, Nilza; Matthews, Helen; Isaacs, Tom; Duffen, Joy; Al-Jawad, Ahmed; Larsen, Frank; Serrano, Artur; Weber, Peter; Thoms, Andrea; Sollinger, Stefan; Graessner, Holm; Maetzler, Walter; Ferreira, Joaquim J

    2016-03-12

    There is growing interest in having objective assessment of health-related outcomes using technology-based devices that provide unbiased measurements which can be used in clinical practice and scientific research. Many studies have investigated the clinical manifestations of Parkinson's disease using such devices. However, clinimetric properties and clinical validation vary among the different devices. Given such heterogeneity, we sought to perform a systematic review in order to (i) list, (ii) compare and (iii) classify technological-based devices used to measure motor function in individuals with Parkinson's disease into three groups, namely wearable, non-wearable and hybrid devices. A systematic literature search of the PubMed database resulted in the inclusion of 168 studies. These studies were grouped based on the type of device used. For each device we reviewed availability, use, reliability, validity, and sensitivity to change. The devices were then classified as (i) 'recommended', (ii) 'suggested' or (iii) 'listed' based on the following criteria: (1) used in the assessment of Parkinson's disease (yes/no), (2) used in published studies by people other than the developers (yes/no), and (3) successful clinimetric testing (yes/no). Seventy-three devices were identified, 22 were wearable, 38 were non-wearable, and 13 were hybrid devices. In accordance with our classification method, 9 devices were 'recommended', 34 devices were 'suggested', and 30 devices were classified as 'listed'. Within the wearable devices group, the Mobility Lab sensors from Ambulatory Parkinson's Disease Monitoring (APDM), Physilog®, StepWatch 3, TriTrac RT3 Triaxial accelerometer, McRoberts DynaPort, and Axivity (AX3) were classified as 'recommended'. Within the non-wearable devices group, the Nintendo Wii Balance Board and GAITRite® gait analysis system were classified as 'recommended'. Within the hybrid devices group only the Kinesia® system was classified as 'recommended'.

  1. Electrification Futures Study: End-Use Electric Technology Cost and Performance Projections through 2050

    Energy Technology Data Exchange (ETDEWEB)

    Vimmerstedt, Laura J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jadun, Paige [National Renewable Energy Lab. (NREL), Golden, CO (United States); McMillan, Colin A. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Steinberg, Daniel C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Muratori, Matteo [National Renewable Energy Lab. (NREL), Golden, CO (United States); Mai, Trieu T. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2018-01-02

    This report provides projected cost and performance assumptions for electric technologies considered in the Electrification Futures Study, a detailed and comprehensive analysis of the effects of widespread electrification of end-use service demands in all major economic sectors - transportation, residential and commercial buildings, and industry - for the contiguous United States through 2050. Using extensive literature searches and expert assessment, the authors identify slow, moderate, and rapid technology advancement sensitivities on technology cost and performance, and they offer a comparative analysis of levelized cost metrics as a reference indicator of total costs. The identification and characterization of these end-use service demand technologies is fundamental to the Electrification Futures Study. This report, the larger Electrification Futures Study, and the associated data and methodologies may be useful to planners and analysts in evaluating the potential role of electrification in an uncertain future. The report could be broadly applicable for other analysts and researchers who wish to assess electrification and electric technologies.

  2. Development and validation of science, technology, engineering and mathematics (STEM) based instructional material

    Science.gov (United States)

    Gustiani, Ineu; Widodo, Ari; Suwarma, Irma Rahma

    2017-05-01

    This study is intended to examine the development and validation of simple machines instructional material that developed based on Science, Technology, Engineering and Mathematics (STEM) framework that provides guidance to help students learn and practice for real life and enable individuals to use knowledge and skills they need to be an informed citizen. Sample of this study consist of one class of 8th grader at a junior secondary school in Bandung, Indonesia. To measure student learning, a pre-test and post-test were given before and after implementation of the STEM based instructional material. In addition, a questionnaire of readability was given to examine the clarity and difficulty level of each page of instructional material. A questionnaire of students' response towards instructional material given to students and teachers at the end of instructional material reading session to measure layout aspects, content aspects and utility aspects of instructional material for being used in the junior secondary school classroom setting. The results show that readability aspect and students' response towards STEM based instructional material of STEM based instructional material is categorized as very high. Pretest and posttest responses revealed that students retained significant amounts information upon completion of the STEM instructional material. Student overall learning gain is 0.67 which is categorized as moderate. In summary, STEM based instructional material that was developed is valid enough to be used as educational materials necessary for conducting effective STEM education.

  3. Analysis of floor technology scheme in open-top construction of nuclear power project

    International Nuclear Information System (INIS)

    Zhang Shuxia; Lu Qinwu; Han Xiaoping

    2014-01-01

    Open-top construction is general technology in Ⅲ generation in nuclear power project. Because traditional floor structure and its form board upholding doesn't meet open-top construction, four floor scheme are presented, whose characters, advantages and disadvantages, and its application are summarized. The research results will help to the application of open-top construction. (authors)

  4. Innovation capabilities in food and beverages and technology-based innovation projects

    NARCIS (Netherlands)

    Tepic, M.; Fortuin, F.T.J.M.; Kemp, R.G.M.; Omta, S.W.F.

    2014-01-01

    Purpose - The aim of this paper is to establish the differences between the food and beverages (F&B) and technology-based industries with regards to the relation between previously identified success factors and innovation project performance. Design/methodology/approach - These differences are

  5. Using Technology-Enhanced, Cooperative, Group-Project Learning for Student Comprehension and Academic Performance

    Science.gov (United States)

    Tlhoaele, Malefyane; Suhre, Cor; Hofman, Adriaan

    2016-01-01

    Cooperative learning may improve students' motivation, understanding of course concepts, and academic performance. This study therefore enhanced a cooperative, group-project learning technique with technology resources to determine whether doing so improved students' deep learning and performance. A sample of 118 engineering students, randomly…

  6. 77 FR 69601 - Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects

    Science.gov (United States)

    2012-11-20

    ... DEPARTMENT OF DEFENSE Office of the Secretary Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects AGENCY: Office of the Deputy Assistant Secretary of Defense... Assistant for Laboratory Management, AMRDEC, 5400 Fowler Road, Redstone Arsenal, AL 35898-5000; Engineer...

  7. 78 FR 34655 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2013-06-10

    ... DEPARTMENT OF DEFENSE Office of the Secretary Science and Technology Reinvention Laboratory Personnel Management Demonstration Project, Department of Navy, Office of Naval Research (ONR); Proposed..., 2010 (75 FR 77380-77447), DoD published a notice of approval of a personnel management demonstration...

  8. 78 FR 29335 - Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects

    Science.gov (United States)

    2013-05-20

    ... DEPARTMENT OF DEFENSE Office of the Secretary Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects AGENCY: Office of the Deputy Assistant Secretary of Defense...: Special Assistant for Laboratory Management, AMRDEC, 5400 Fowler Road, Redstone Arsenal, AL 35898-5000...

  9. Social Informatics: Beyond Technology, A Project in Schools of Social Work in the European Community

    NARCIS (Netherlands)

    Prof. Dr. Jan Steyaert; Harmen Grebel

    1995-01-01

    The authors review the findings of a research project conducted throughout schools of social work in Europe on the level of attention paid to the vocational use of information technology in social work education. Provided is an outline of the research design and an overview of how information

  10. Tapping Technology in Creating Product Development Studies: Reflections on an ESP-Business Project

    Science.gov (United States)

    Yeh, Aiden

    2015-01-01

    This paper describes a teacher's reflections on a technology-enhanced project-based learning approach to teaching an ESP-business lesson on product development, which is part of the curriculum for Conference English and Meetings Practice (CEMP), a business-track course for the Adult Continuing Education program at a private university in southern…

  11. The Development of Future Technology Teachers' Artistic-Projective Abilities: Foreign Experience

    Science.gov (United States)

    Kurach, Mykola

    2016-01-01

    The necessity to form and develop future technology teachers' creative abilities has been stressed in the article. The psychologic-pedagogical researches of the leading specialists from Europe, the USA and Japan in the field of creative work and creativity have been analyzed. The main problems of the creative artistic-projective abilities…

  12. Frames for Learning Science: Analyzing Learner Positioning in a Technology-Enhanced Science Project

    Science.gov (United States)

    Silseth, K.; Arnseth, H. C.

    2016-01-01

    In this article, we examine the relationship between how students are positioned in social encounters and how this influences learning in a technology-supported science project. We pursue this topic by focusing on the participation trajectory of one particular learner. The analysis shows that the student cannot be interpreted as one type of…

  13. Vertical and Horizontal Integration of Laboratory Curricula and Course Projects across the Electronic Engineering Technology Program

    Science.gov (United States)

    Zhan, Wei; Goulart, Ana; Morgan, Joseph A.; Porter, Jay R.

    2011-01-01

    This paper discusses the details of the curricular development effort with a focus on the vertical and horizontal integration of laboratory curricula and course projects within the Electronic Engineering Technology (EET) program at Texas A&M University. Both software and hardware aspects are addressed. A common set of software tools are…

  14. Using Technology to Facilitate and Enhance Project-based Learning in Mathematical Physics

    Science.gov (United States)

    Duda, Gintaras

    2011-04-01

    Problem-based and project-based learning are two pedagogical techniques that have several clear advantages over traditional instructional methods: 1) both techniques are active and student centered, 2) students confront real-world and/or highly complex problems, and 3) such exercises model the way science and engineering are done professionally. This talk will present an experiment in project/problem-based learning in a mathematical physics course. The group project in the course involved modeling a zombie outbreak of the type seen in AMC's ``The Walking Dead.'' Students researched, devised, and solved their mathematical models for the spread of zombie-like infection. Students used technology in all stages; in fact, since analytical solutions to the models were often impossible, technology was a necessary and critical component of the challenge. This talk will explore the use of technology in general in problem and project-based learning and will detail some specific examples of how technology was used to enhance student learning in this course. A larger issue of how students use the Internet to learn will also be explored.

  15. Leveraging Technology in Campus Change Initiatives: A Practice Brief Based on BEAMS Project Outcomes

    Science.gov (United States)

    Chough, Alex

    2008-01-01

    During 2003-07, the Building Engagement and Attainment for Minority Students (BEAMS) project fostered data-based campus change initiatives at more than 100 four-year Historically Black, Hispanic-Serving, and Tribal colleges and universities to increase student engagement and learning. This brief provides an overview of technology-driven strategies…

  16. Study of Collaborative Management for Transportation Construction Project Based on BIM Technology

    Science.gov (United States)

    Jianhua, Liu; Genchuan, Luo; Daiquan, Liu; Wenlei, Li; Bowen, Feng

    2018-03-01

    Abstract. Building Information Modeling(BIM) is a building modeling technology based on the relevant information data of the construction project. It is an advanced technology and management concept, which is widely used in the whole life cycle process of planning, design, construction and operation. Based on BIM technology, transportation construction project collaborative management can have better communication through authenticity simulation and architectural visualization and can obtain the basic and real-time information such as project schedule, engineering quality, cost and environmental impact etc. The main services of highway construction management are integrated on the unified BIM platform for collaborative management to realize information intercommunication and exchange, to change the isolated situation of information in the past, and improve the level of information management. The final BIM model is integrated not only for the information management of project and the integration of preliminary documents and design drawings, but also for the automatic generation of completion data and final accounts, which covers the whole life cycle of traffic construction projects and lays a good foundation for smart highway construction.

  17. EUROPEAN PROJECTS AS A TOOL FOR IMPROVING FARMERS SKILLS VIA MODERN INFORMATION TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Zuzana PALKOVA

    2013-01-01

    Full Text Available This article presents European projects with the main focus on the improving the skills and competitiveness of farmers by modern information and communication technologies and e-learning methods. Two projects – AVARES - Enhance attractiveness of renewable energy training by virtual reality and NewCAP - New European Standards in the Context of Reformed EU Common Agricultural Policy are projects under the Leonardo da Vinci Transfer ofInnovation grant scheme. They try to present new way of vocational education and training in the agrosector. The main aim of the AVARES project is to develop the multimedia learning materials for vocational education and training in the field of agricultural and rural development and application of modern information and communication technologies into vocational education and training. The emphasis is put on the application of modern ICT equipment and technologies, with the main focus on the Virtual reality, 3D visual display and e - learning 2.0 methods. New programming period 2014 – 2020 will bring significant changes within the Common Agricultural Policy (CAP which will have a serious impact on economy especially of larger beneficiaries. The „NewCAP“ project aiming at preparation of actors in rural areas to take the proposed changes in the policy through interactive educational programme.

  18. Worksheet of Exogenous Variables that Impact the Success of Validation Stage of Product Delivery of a Project

    Directory of Open Access Journals (Sweden)

    Altino José Mentzingen de Moraes

    2015-02-01

    Full Text Available In the theory presented by PMBoK© - Project Management Book of Knowledge the Project Management [1] features - among others - the Disciplines of Scope and Quality. The Discipline of Scope, to become effective, must provide the execution of a hypothetical step (not defined in its text but perceived by the present author of this paper that can be termed as Planning Stage of Project Result. The Discipline of Quality, to become effective, must provide the execution of an also hypothetical step (also not defined in its text but also perceived by the same present author of this paper that can be termed as Validation Stage of Product Delivery.In the theory presented by PMBoK© - Project Management Book of Knowledge the Project Management [1] features - among others - the Disciplines of Scope and Quality. The Discipline of Scope, to become effective, must provide the execution of a hypothetical step (not defined in its text but perceived by the present author of this paper that can be termed as Planning Stage of Project Result. The Discipline of Quality, to become effective, must provide the execution of an also hypothetical step (also not defined in its text but also perceived by the same present author of this paper that can be termed as Validation Stage of Product Delivery.In the theory presented by PMBoK© - Project Management Book of Knowledge the Project Management [1] features - among others - the Disciplines of Scope and Quality. The Discipline of Scope, to become effective, must provide the execution of a hypothetical step (not defined in its text but perceived by the present author of this paper that can be termed as Planning Stage of Project Result. The Discipline of Quality, to become effective, must provide the execution of an also hypothetical step (also not defined in its text but also perceived by the same present author of this paper that can be termed as Validation Stage of Product Delivery. The importance of both Stages is crucial to

  19. Ceramic technology for advanced heat engines project. Semiannual progress report, April-September 1985

    Energy Technology Data Exchange (ETDEWEB)

    1986-05-01

    An assessment of needs was completed, and a five-year project plan was developed with input from private industry. Objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. Focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. The work described in this report is organized according to the following WBS project elements: management and coordination; materials and processing (monolithics, ceramic composites, thermal and wear coatings, joining); materials design methodology (contact interfaces, new concepts); data base and life prediction (time-dependent behavior, environmental effects, fracture mechanics, NDE development); and technology transfer. This report includes contributions from all currently active project participants.

  20. Reflections on Students’ Projects with Motion Sensor Technologies in a Problem-Based Learning Environment

    DEFF Research Database (Denmark)

    Triantafyllou, Eva; Timcenko, Olga; Triantafyllidis, George

    2014-01-01

    skills or on the learning experience. This paper presents our experiences on the educational use of motion sensor technologies. Our research was conducted at the department of Medialogy in Aalborg University Copenhagen. Aalborg University applies a problem-based, project-organized model of teaching...... and learning in all its programs. Our approach differs from the aforementioned ones, since we did not develop learning games for students, but we provided students with motion sensors and asked them to use them for their semester projects. Since Medialogy is an interdisciplinary program that combines...... these questions, we are presenting and discussing students’ projects that used motor sensors. Our results show that the experimentation with motor sensor technologies boosted students’ creativity. Students developed computer games, serious games, computer vision applications and investigated new ways...