The National Educational Technology Plan Doesn't Live up to Its Call for Revolutionary Transformation

Science.gov (United States)

Rose, Raymond M.

2011-01-01

The National Educational Technology Plan (NETP) calls for the revolutionary transformation of the American educational system. The plan correctly points to the decisions of the late 1800s that still direct educational policy today, and correctly calls the school change efforts evolutionary tinkering. The author, a pioneer in online education…

OMICs technologies: tools for food science

National Research Council Canada - National Science Library

Benkeblia, Noureddine

2012-01-01

... in the transformation from industrial to sustained food technologies and the role of these omics tools to mitigate the growing pressure of limited natural resources and environmental degradation...

Technology tools to support reading in the digital age.

Science.gov (United States)

Biancarosa, Gina; Griffiths, Gina G

2012-01-01

Advances in digital technologies are dramatically altering the texts and tools available to teachers and students. These technological advances have created excitement among many for their potential to be used as instructional tools for literacy education. Yet with the promise of these advances come issues that can exacerbate the literacy challenges identified in the other articles in this issue. In this article Gina Biancarosa and Gina Griffiths characterize how literacy demands have changed in the digital age and how challenges identified in other articles in the issue intersect with these new demands. Rather than seeing technology as something to be fit into an already crowded education agenda, Biancarosa and Griffiths argue that technology can be conceptualized as affording tools that teachers can deploy in their quest to create young readers who possess the higher levels of literacy skills and background knowledge demanded by today's information-based society. Biancarosa and Griffiths draw on research to highlight some of the ways technology has been used to build the skills and knowledge needed both by children who are learning to read and by those who have progressed to reading to learn. In their review of the research, Biancarosa and Griffiths focus on the hardware and software used to display and interface with digital text, or what they term e-reading technology. Drawing on studies of e-reading technology and computer technology more broadly, they also reflect on the very real, practical challenges to optimal use of e-reading technology. The authors conclude by presenting four recommendations to help schools and school systems meet some of the challenges that come with investing in e-reading technology: use only technologies that support Universal Design for Learning; choose evidence-based tools; provide technology users with systemic supports; and capitalize on the data capacities and volume of information that technology provides.

A Suite of Tools for Technology Assessment

Science.gov (United States)

2007-09-01

Saden, Povinelli & Rosen, 1989). • This was a significant change in emphasis on the part of NASA, where technology had previously viewed as merely...Cost Analysis Symposium, April 13, 2005. A Suite of Tools for Technology Assessment 24 Bibliography - continued: • Sadin, Stanley T.; Povinelli

Integrated Tools for Future Distributed Engine Control Technologies

Science.gov (United States)

Culley, Dennis; Thomas, Randy; Saus, Joseph

2013-01-01

Turbine engines are highly complex mechanical systems that are becoming increasingly dependent on control technologies to achieve system performance and safety metrics. However, the contribution of controls to these measurable system objectives is difficult to quantify due to a lack of tools capable of informing the decision makers. This shortcoming hinders technology insertion in the engine design process. NASA Glenn Research Center is developing a Hardware-inthe- Loop (HIL) platform and analysis tool set that will serve as a focal point for new control technologies, especially those related to the hardware development and integration of distributed engine control. The HIL platform is intended to enable rapid and detailed evaluation of new engine control applications, from conceptual design through hardware development, in order to quantify their impact on engine systems. This paper discusses the complex interactions of the control system, within the context of the larger engine system, and how new control technologies are changing that paradigm. The conceptual design of the new HIL platform is then described as a primary tool to address those interactions and how it will help feed the insertion of new technologies into future engine systems.

Capitalizing on App Development Tools and Technologies

Science.gov (United States)

Luterbach, Kenneth J.; Hubbell, Kenneth R.

2015-01-01

Instructional developers and others creating apps must choose from a wide variety of app development tools and technologies. Some app development tools have incorporated visual programming features, which enable some drag and drop coding and contextual programming. While those features help novices begin programming with greater ease, questions…

New Technologies and Communications Tools

Science.gov (United States)

Bouse, Jim

2016-01-01

Relationships are key to the success of everything higher education hopes to accomplish, from recruiting the next class to retaining them, guiding them to graduation, creating successful alumni, and fostering satisfied donors. Creation of those relationships can be engaged and facilitated by the technology, communications tools, and ideas…

Information Technology Research Services: Powerful Tools to Keep Up with a Rapidly Moving Field

Science.gov (United States)

Hunter, Paul

2010-01-01

Marty firms offer Information Technology Research reports, analyst calls, conferences, seminars, tools, leadership development, etc. These entities include Gartner, Forrester Research, IDC, The Burton Group, Society for Information Management, 1nfoTech Research, The Corporate Executive Board, and so on. This talk will cover how a number of such services are being used at the Goddard Space Flight Center to improve our IT management practices, workforce skills, approach to innovation, and service delivery. These tools and services are used across the workforce, from the executive leadership to the IT worker. The presentation will cover the types of services each vendor provides and their primary engagement model. The use of these services at other NASA Centers and Headquarters will be included. In addition, I will explain how two of these services are available now to the entire NASA IT workforce through enterprise-wide subscriptions.

Second NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box (TTB)

Science.gov (United States)

ONeil, D. A.; Mankins, J. C.; Christensen, C. B.; Gresham, E. C.

2005-01-01

The Advanced Technology Lifecycle Analysis System (ATLAS), a spreadsheet analysis tool suite, applies parametric equations for sizing and lifecycle cost estimation. Performance, operation, and programmatic data used by the equations come from a Technology Tool Box (TTB) database. In this second TTB Technical Interchange Meeting (TIM), technologists, system model developers, and architecture analysts discussed methods for modeling technology decisions in spreadsheet models, identified specific technology parameters, and defined detailed development requirements. This Conference Publication captures the consensus of the discussions and provides narrative explanations of the tool suite, the database, and applications of ATLAS within NASA s changing environment.

Emerging Technologies as Cognitive Tools for Authentic Learning

Science.gov (United States)

Herrington, Jan; Parker, Jenni

2013-01-01

Employing emerging technologies in learning is becoming increasingly important as a means to support the development of digital media literacy. Using a theoretical framework of authentic learning and technology as cognitive tools, this paper examined student responses to the infusion of emerging technologies in a large first year teacher education…

Longitudinal Study: Efficacy of Online Technology Tools for Instructional Use

Science.gov (United States)

Uenking, Michael D.

2011-01-01

Studies show that the student population (secondary and post secondary) is becoming increasingly more technologically savvy. Use of the internet, computers, MP3 players, and other technologies along with online gaming has increased tremendously amongst this population such that it is creating an apparent paradigm shift in the learning modalities of these students. Instructors and facilitators of learning can no longer rely solely on traditional lecture-based lesson formals. In order to achieve student academic success and satisfaction and to increase student retention, instructors must embrace various technology tools that are available and employ them in their lessons. A longitudinal study (January 2009-June 2010) has been performed that encompasses the use of several technology tools in an instructional setting. The study provides further evidence that students not only like the tools that are being used, but prefer that these tools be used to help supplement and enhance instruction.

Technology Survey Assistance Tool Focusing on Their Advantages

Science.gov (United States)

Nishiyama, Risa; Takeuchi, Hironori; Watanabe, Hideo; Nasukawa, Tetsuya

It is important for R&D managers, consultants, and other people seeking broad knowledge in technology fields to survey technical literature such as research papers, white papers, and technology news articles. One of the important kinds of information for those people regards the effectiveness of new technologies in their own businesses. General search engines are good at selecting documents revealing the details of a specific technology or a technology field, but it is hard to obtain useful information about how a technology will apply to individual business cases from such search results. There is a need for a technology survey assistance tool that helps users find technologies with suitable capabilities. In this paper, two technical tasks were tackled to develop the prototype of this assistance tool: Extraction of advantage phrases and scoring for the advantage phrases to find novel applications in the target technology field. We describe a new method to identify advantage phrases in technical documents and our scoring function that gives higher scores to novel applications of the technology. The results of evaluations showed our phrase identification method with only a few phrasal patterns performs almost as well as human annotators, and the proposed scoring conforms better to the decisions made by professionals than random sort.

Comparison between microfabrication technologies for metal tooling

DEFF Research Database (Denmark)

Uriarte, L.; Herrero, A.; Ivanov, A.

2006-01-01

microtechnologies for processing tooling inserts made of metal. The following technologies have been analysed: micromilling, micro-electrodischarge machining (EDM, including wire-EDM, sinking-EDM, and EDM-milling), laser micromachining, electroforming, and electrochemical milling (ECF) (an electrochemical machining...... innovative process proposed by HSG-IMAT). Considered tool-insert materials are nickel for electroforming, stainless steel for ECF, and tool steel (AISI H13) for all other processes. Typical features (ribs, channels, pins, and holes) required by micro-optics, microfluidics, and sensor and actuator...

SACA: Software Assisted Call Analysis--an interactive tool supporting content exploration, online guidance and quality improvement of counseling dialogues.

Science.gov (United States)

Trinkaus, Hans L; Gaisser, Andrea E

2010-09-01

Nearly 30,000 individual inquiries are answered annually by the telephone cancer information service (CIS, KID) of the German Cancer Research Center (DKFZ). The aim was to develop a tool for evaluating these calls, and to support the complete counseling process interactively. A novel software tool is introduced, based on a structure similar to a music score. Treating the interaction as a "duet", guided by the CIS counselor, the essential contents of the dialogue are extracted automatically. For this, "trained speech recognition" is applied to the (known) counselor's part, and "keyword spotting" is used on the (unknown) client's part to pick out specific items from the "word streams". The outcomes fill an abstract score representing the dialogue. Pilot tests performed on a prototype of SACA (Software Assisted Call Analysis) resulted in a basic proof of concept: Demographic data as well as information regarding the situation of the caller could be identified. The study encourages following up on the vision of an integrated SACA tool for supporting calls online and performing statistics on its knowledge database offline. Further research perspectives are to check SACA's potential in comparison with established interaction analysis systems like RIAS. Copyright (c) 2010 Elsevier Ireland Ltd. All rights reserved.

Electrical hand tools and techniques: A compilation. [utilization of space technology for tools and adapters

Science.gov (United States)

1974-01-01

Space technology utilization for developing tools, adapters, and fixtures and procedures for assembling, installing, and servicing electrical components and equipment are discussed. Some of the items considered are: (1) pivotal screwdriver, (2) termination locator tool for shielded cables, (3) solder application tools, (4) insulation and shield removing tool, and (5) torque wrench adapter for cable connector engaging ring. Diagrams of the various tools and devices are provided.

Tools and technologies for expert systems: A human factors perspective

Science.gov (United States)

Rajaram, Navaratna S.

1987-01-01

It is widely recognized that technologies based on artificial intelligence (AI), especially expert systems, can make significant contributions to the productivity and effectiveness of operations of information and knowledge intensive organizations such as NASA. At the same time, these being relatively new technologies, there is the problem of transfering technology to key personnel of such organizations. The problems of examining the potential of expert systems and of technology transfer is addressed in the context of human factors applications. One of the topics of interest was the investigation of the potential use of expert system building tools, particularly NEXPERT as a technology transfer medium. Two basic conclusions were reached in this regard. First, NEXPERT is an excellent tool for rapid prototyping of experimental expert systems, but not ideal as a delivery vehicle. Therefore, it is not a substitute for general purpose system implementation languages such a LISP or C. This assertion probably holds for nearly all such tools on the market today. Second, an effective technology transfer mechanism is to formulate and implement expert systems for problems which members of the organization in question can relate to. For this purpose, the LIghting EnGineering Expert (LIEGE) was implemented using NEXPERT as the tool for technology transfer and to illustrate the value of expert systems to the activities of the Man-System Division.

Mobile technologies as a health care tool

CERN Document Server

Arslan, Pelin

2016-01-01

This book presents a state-of-the-art overview of the available and emerging mobile technologies and explores how these technologies can serve as support tools in enhancing user participation in health care and promoting well-being in the daily lives of individuals, thereby reducing the burden of chronic disease on the health care system. The analysis is supported by presentation of a variety of case studies on the ways in which mobile technologies can be used to increase connectivity with health care providers and relevant others in order to promote healthy lifestyles and improve service provision. Detailed information is also provided on a sample project in which a set of tools has been used by teens at risk of obesity to record their sociopsychological environment and everyday health routines. Specifically, it is evaluated whether video diaries, created using a mobile platform and shared in real time via a social network, assist subjects in confronting obesity as a chronic disease. The book will be of inte...

Gene calling and bacterial genome annotation with BG7.

Science.gov (United States)

Tobes, Raquel; Pareja-Tobes, Pablo; Manrique, Marina; Pareja-Tobes, Eduardo; Kovach, Evdokim; Alekhin, Alexey; Pareja, Eduardo

2015-01-01

New massive sequencing technologies are providing many bacterial genome sequences from diverse taxa but a refined annotation of these genomes is crucial for obtaining scientific findings and new knowledge. Thus, bacterial genome annotation has emerged as a key point to investigate in bacteria. Any efficient tool designed specifically to annotate bacterial genomes sequenced with massively parallel technologies has to consider the specific features of bacterial genomes (absence of introns and scarcity of nonprotein-coding sequence) and of next-generation sequencing (NGS) technologies (presence of errors and not perfectly assembled genomes). These features make it convenient to focus on coding regions and, hence, on protein sequences that are the elements directly related with biological functions. In this chapter we describe how to annotate bacterial genomes with BG7, an open-source tool based on a protein-centered gene calling/annotation paradigm. BG7 is specifically designed for the annotation of bacterial genomes sequenced with NGS. This tool is sequence error tolerant maintaining their capabilities for the annotation of highly fragmented genomes or for annotating mixed sequences coming from several genomes (as those obtained through metagenomics samples). BG7 has been designed with scalability as a requirement, with a computing infrastructure completely based on cloud computing (Amazon Web Services).

CoVaCS: a consensus variant calling system.

Science.gov (United States)

Chiara, Matteo; Gioiosa, Silvia; Chillemi, Giovanni; D'Antonio, Mattia; Flati, Tiziano; Picardi, Ernesto; Zambelli, Federico; Horner, David Stephen; Pesole, Graziano; Castrignanò, Tiziana

2018-02-05

The advent and ongoing development of next generation sequencing technologies (NGS) has led to a rapid increase in the rate of human genome re-sequencing data, paving the way for personalized genomics and precision medicine. The body of genome resequencing data is progressively increasing underlining the need for accurate and time-effective bioinformatics systems for genotyping - a crucial prerequisite for identification of candidate causal mutations in diagnostic screens. Here we present CoVaCS, a fully automated, highly accurate system with a web based graphical interface for genotyping and variant annotation. Extensive tests on a gold standard benchmark data-set -the NA12878 Illumina platinum genome- confirm that call-sets based on our consensus strategy are completely in line with those attained by similar command line based approaches, and far more accurate than call-sets from any individual tool. Importantly our system exhibits better sensitivity and higher specificity than equivalent commercial software. CoVaCS offers optimized pipelines integrating state of the art tools for variant calling and annotation for whole genome sequencing (WGS), whole-exome sequencing (WES) and target-gene sequencing (TGS) data. The system is currently hosted at Cineca, and offers the speed of a HPC computing facility, a crucial consideration when large numbers of samples must be analysed. Importantly, all the analyses are performed automatically allowing high reproducibility of the results. As such, we believe that CoVaCS can be a valuable tool for the analysis of human genome resequencing studies. CoVaCS is available at: https://bioinformatics.cineca.it/covacs .

Investigating the Effectiveness of Computer-Assisted Language Learning (CALL) Using Google Documents in Enhancing Writing--A Study on Senior 1 Students in a Chinese Independent High School

Science.gov (United States)

Ambrose, Regina Maria; Palpanathan, Shanthini

2017-01-01

Computer-assisted language learning (CALL) has evolved through various stages in both technology as well as the pedagogical use of technology (Warschauer & Healey, 1998). Studies show that the CALL trend has facilitated students in their English language writing with useful tools such as computer based activities and word processing. Students…

A software tool for soil clean-up technology selection

International Nuclear Information System (INIS)

Vranes, S.; Gonzalez-Valencia, E.; Lodolo, A.; Miertus, S.

2002-01-01

Soil remediation is a difficult, time-consuming and expensive operation. A variety of mature and emerging soil remediation technologies is available and future trends in remediation will include continued competition among environmental service companies and technology developers, which will definitely result in further increase in the clean-up options. Consequently, the demand has enhanced developing decision support tools that could help the decision makers to select the most appropriate technology for the specific contaminated site, before the costly remedial actions are taken. Therefore, a software tool for soil clean-up technology selection is currently being developed with the aim of closely working with human decision makers (site owners, local community representatives, environmentalists, regulators, etc.) to assess the available technologies and preliminarily select the preferred remedial options. The analysis for the identification of the best remedial options is based on technical, financial, environmental, and social criteria. These criteria are ranked by all involved parties to determine their relative importance for a particular project. (author)

Teachers' Perspective on Using Technology as an Instructional Tool

Science.gov (United States)

Davidson, Leavery Y. Jefferson; Richardson, Martha; Jones, Don

2014-01-01

Federal mandates require technology use in the classroom, but not all English language arts (ELA) teachers have implemented technology as an integral part of teaching. The purpose of this qualitative case study was to investigate why ELA teachers in 2 local high schools rarely or never use technology as an instructional tool. The study was…

KM Tools and Technologies that Share Distribute Knowledge

Directory of Open Access Journals (Sweden)

Ileana Hauer

2008-10-01

Full Text Available The exponential increase in information, primarily due to the electronic capture of data and its storage in vast data warehouses, has created a demand for analyzing the large amount of data generated by today’s organizations so that enterprise can respond quickly to fast changing markets. There are various tools and technologies that can be used to share and distribute knowledge, include e-mail, groupware, data mining ,expert systems and others. The paper outlines these technologies, which dominate the technical tools for sharing knowledge from an organizations data assets and finally. The case study, an Expert System, use expert knowledge to attain highlevel decision performance in a narrow domain.

Terascale Simulation Tools and Technologies

Energy Technology Data Exchange (ETDEWEB)

Li, Xiaolin

2007-03-09

We report the development of front tracking method as a simulation tool and technology for the computation on several important SciDAC and SciDAC associated applications. The progress includes the extraction of an independent software library from the front tracking code, conservative front tracking, applications of front tracking to the simulation of fusion pellet injection in a magnetically confined plasma, the study of a fuel injection jet, and the study of fluid chaotic mixing, among other problems.

Can wireless technology enable new diabetes management tools?

Science.gov (United States)

Hedtke, Paul A

2008-01-01

Mobile computing and communications technology embodied in the modern cell phone device can be employed to improve the lives of diabetes patients by giving them better tools for self-management. Several companies are working on the development of diabetes management tools that leverage the ubiquitous cell phone to bring self-management tools to the hand of the diabetes patient. Integration of blood glucose monitoring (BGM) technology with the cell phone platform adds a level of convenience for the person with diabetes, but, more importantly, allows BGM data to be automatically captured, logged, and processed in near real time in order to provide the diabetes patient with assistance in managing their blood glucose levels. Other automatic measurements can estimate physical activity, and information regarding medication events and food intake can be captured and analyzed in order to provide the diabetes patient with continual assistance in managing their therapy and behaviors in order to improve glycemic control. The path to realization of such solutions is not, however, without obstacles.

A Comparison between Microfabrication Technologies for Metal Tooling

DEFF Research Database (Denmark)

Uriarte, L.; Ivanov, A.; Oosterling, H

2005-01-01

, stainless steel for ECF, and tool steel (AISI H13) for the other processes. Typical features (ribs, channels, pins and holes) required by microoptics, microfluidics and sensors and actuators applications have been selected to carry out this analysis The task results provide a global comparison between......The current paper is based on the information gathered within 4M Network activities, specifically in the "Processing of Metals" Division (Task 7.2 "Tooling"). The aim of the task involves a systematic analysis of the partners' expertise in different technologies for processing tooling inserts made...

On-call service of neurosurgeons in Germany: organization, use of communication services, and personal acceptance of modern technologies.

Science.gov (United States)

Brenke, Christopher; Lassel, Elke A; Terris, Darcey; Kurt, Aysel; Schmieder, Kirsten; Schoenberg, Stefan O; Weisser, Gerald

2014-05-01

A significant proportion of acute care neurosurgical patients present to hospital outside regular working hours. The objective of our study was to evaluate the structure of neurosurgical on-call services in Germany, the use of modern communication devices and teleradiology services, and the personal acceptance of modern technologies by neurosurgeons. A nationwide survey of all 141 neurosurgical departments in Germany was performed. The questionnaire consisted of two parts: one for neurosurgical departments and one for individual neurosurgeons. The questionnaire, available online and mailed in paper form, included 21 questions about on-call service structure; the availability and use of communication devices, teleradiology services, and other information services; and neurosurgeons' personal acceptance of modern technologies. The questionnaire return rate from departments was 63.1% (89/141), whereas 187 individual neurosurgeons responded. For 57.3% of departments, teleradiology services were available and were frequently used by 62.2% of neurosurgeons. A further 23.6% of departments described using smartphone screenshots of computed tomography (CT) images transmitted by multimedia messaging service (MMS), and 8.6% of images were described as sent by unencrypted email. Although 47.0% of neurosurgeons reported owning a smartphone, only 1.1% used their phone for on-call image communication. Teleradiology services were observed to be widely used by on-call neurosurgeons in Germany. Nevertheless, a significant number of departments appear to use outdated techniques or techniques that leave patient data unprotected. On-call neurosurgeons in Germany report a willingness to adopt more modern approaches, utilizing readily available smartphones or tablet technology. Georg Thieme Verlag KG Stuttgart · New York.

Surgical Technology Integration with Tools for Cognitive Human Factors (STITCH)

Science.gov (United States)

2010-10-01

Measurement Tool We conducted another round of data collection using the daVinci Surgical System at the University of Kentucky Hospital in May. In this...9 3. Tools and Display Technology...considering cognitive and environmental factors such as mental workload, stress, situation awareness, and level of comfort with complex tools . To

Strategic Planning Tools for Large-Scale Technology-Based Assessments

Science.gov (United States)

Koomen, Marten; Zoanetti, Nathan

2018-01-01

Education systems are increasingly being called upon to implement new technology-based assessment systems that generate efficiencies, better meet changing stakeholder expectations, or fulfil new assessment purposes. These assessment systems require coordinated organisational effort to implement and can be expensive in time, skill and other…

Technology as Mediation Tool for Improving Teaching Profession in Higher Education Practices

Science.gov (United States)

Altinay-Gazi, Zehra; Altinay-Aksal, Fahriye

2017-01-01

Technology became a mediation tool for forming information and developing skills is teacher education programs of higher education institutions because technological tools can be used for self-reflection of prospective teachers' teaching performances. Practical implementation of teacher education programmes is a part of quality indicator in higher…

Building heating technology in Smart Home using PI System management tools

Directory of Open Access Journals (Sweden)

Jan Vanus

2016-03-01

Full Text Available For comfortable remote monitoring of some operational and technical functions inside own Smart Home building, it is possible to use a lot of useful programmes and tools. However, not each programme or tool is suited to this purpose, or it does not offer required functionality. The aim of this paper is to describe using an appropriate software tool of PI System for a real-time monitoring of acquired data from real technology parts located at a training centre of the Moravian-Silesian Wood Cluster. Then a superior system including applications of PI Coresight and PI ProcessBook is used for analysis and processing of these acquired data (e.g. by using the Dynamic Time Warping method for specific technological quantities. Each application has own advantages and disadvantages, which are evaluated in conjunction with possibilities of manipulating the data. In an experimental part, there are also applied a technological communication standard of BACnet to controlling heating, cooling and forced ventilation, and a software tool of DESIGO Insight for visualising the data in forms of tables, multi-layer graphs, and screens for a certain technology.

Is Technology Present in Frailty? Technology a Back-up Tool for Dealing with Frailty in the Elderly: A Systematic Review.

Science.gov (United States)

Mugueta-Aguinaga, Iranzu; Garcia-Zapirain, Begonya

2017-04-01

This study analyzes the technologies used in dealing with frailty within the following areas: prevention, care, diagnosis and treatment. The aim of this paper is, on the one hand, to analyze the extent to which technology is present in terms of its relationship with frailty and what technological resources are used to treat it. Its other purpose is to define new challenges and contributions made by physiotherapy using technology. Eighty documents related to research, validation and/or the ascertaining of different types of hardware, software or both were reviewed in prominent areas. The authors used the following scales: in the area of diagnosis, Fried's phenotype model of frailty and a model based on trials for the design of devices. The technologies developed that are based on these models accounted for 55% and 45% of cases respectively. In the area of prevention, the results proved similar regarding the use of wireless sensors with cameras (35.71%), and Kinect™ sensors (28.57%) to analyze movements and postures that indicate a risk of falling. In the area of care, results were found referring to the use of different motion, physiological and environmental wireless sensors (46,15%), i.e. so-called smart homes. In the area of treatment, the results show with a percentage of 37.5% that the Nintendo ® Wii™ console is the most used tool for treating frailty in elderly persons. Further work needs to be carried out to reduce the gap existing between technology, frail elderly persons, healthcare professionals and carers to bring together the different views about technology. This need raises the challenge of developing and implementing technology in physiotherapy via serious games that may via play and connectivity help to improve the functional capacity, general health and quality of life of frail individuals.

Using Web-Based Technologies and Tools in Future Choreographers' Training: British Experience

Science.gov (United States)

Bidyuk, Dmytro

2016-01-01

In the paper the problem of using effective web-based technologies and tools in teaching choreography in British higher education institutions has been discussed. Researches on the usage of web-based technologies and tools for practical dance courses in choreographers' professional training at British higher education institutions by such British…

A call for a community of practice to assess the impact of emerging technologies on undergraduate biology education.

Science.gov (United States)

Jensen, Jamie L; Dario-Becker, Juville; Hughes, Lee E; Amburn, D Sue Katz; Shaw, Joyce A

2012-01-01

Recent recommendations for educational research encourage empirically tested, theory-based, completely transparent, and broadly applicable studies. In light of these recommendations, we call for a research standard and community of practice in the evaluation of technology use in the undergraduate life science classroom. We outline appropriate research methodology, review and critique the past research on technology usage and, lastly, suggest a new and improved focus for research on emerging technologies.

Description of Ethical Bio-Technology Assessment Tools for Agriculture and Food Production. Interim Report Ethical Bio-TA Tools

NARCIS (Netherlands)

Beekman, V.

2004-01-01

The objective of 'Ethical Bio-TA Tools' project is to develop and improve tools for the ethical assessment of new technologies in agriculture and food production in general and modern biotechnologies in particular. The developed tools need to be designed for various purposes and contexts. They

Impact of new technologies on stress, attrition and well-being in emergency call centers: the NextGeneration 9-1-1 study protocol.

Science.gov (United States)

Baseman, Janet; Revere, Debra; Painter, Ian; Stangenes, Scott; Lilly, Michelle; Beaton, Randal; Calhoun, Rebecca; Meischke, Hendrika

2018-05-04

Our public health emergency response system relies on the "first of the first responders"-the emergency call center workforce that handles the emergency needs of a public in distress. Call centers across the United States have been preparing for the "Next Generation 9-1-1" initiative, which will allow citizens to place 9-1-1 calls using a variety of digital technologies. The impacts of this initiative on a workforce that is already highly stressed is unknown. There is concern that these technology changes will increase stress, reduce job performance, contribute to maladaptive coping strategies, lower employee retention, or change morale in the workplace. Understanding these impacts to inform approaches for mitigating the health and performance risks associated with new technologies is crucial for ensuring the 911 system fulfills its mission of providing optimal emergency response to the public. Our project is an observational, prospective cohort study framed by the first new technology that will be implemented: text-to-911 calling. Emergency center call takers will be recruited nationwide. Data will be collected by online surveys distributed at each center before text-to-911 implementation; within the first month of implementation; and 6 months after implementation. Primary outcome measures are stress as measured by the Calgary Symptoms of Stress Index, use of sick leave, job performance, and job satisfaction. Primary analyses will use mixed effects regression models and mixed effects logistic regression models to estimate the change in outcome variables associated with text-to-911 implementation. Multiple secondary analyses will examine effects of stress on absenteeism; associations between technology attitudes and stress; effects of implementation on attitudes towards technology; and mitigating effects of job demands, job satisfaction, attitudes towards workplace technology and workplace support on change in stress. Our public health dependence on this workforce

Complexity Theory and CALL Curriculum in Foreign Language Learning

Directory of Open Access Journals (Sweden)

Hassan Soleimani

2014-05-01

Full Text Available Complexity theory literally indicates the complexity of a system, behavior, or a process. Its connotative meaning, while, implies dynamism, openness, sensitivity to initial conditions and feedback, and adaptation properties of a system. Regarding English as a Foreign/ Second Language (EFL/ESL this theory emphasizes on the complexity of the process of teaching and learning, including all the properties of a complex system. The purpose of the current study is to discuss the role of CALL as a modern technology in simplifying the process of teaching and learning a new language while integrating into the complexity theory. Nonetheless, the findings obtained from reviewing previously conducted studies in this field confirmed the usefulness of CALL curriculum in EFL/ESL contexts. These findings can also provide pedagogical implications for employing computer as an effective teaching and learning tool.

Developing next-generation telehealth tools and technologies: patients, systems, and data perspectives.

Science.gov (United States)

Ackerman, Michael J; Filart, Rosemarie; Burgess, Lawrence P; Lee, Insup; Poropatich, Ronald K

2010-01-01

The major goals of telemedicine today are to develop next-generation telehealth tools and technologies to enhance healthcare delivery to medically underserved populations using telecommunication technology, to increase access to medical specialty services while decreasing healthcare costs, and to provide training of healthcare providers, clinical trainees, and students in health-related fields. Key drivers for these tools and technologies are the need and interest to collaborate among telehealth stakeholders, including patients, patient communities, research funders, researchers, healthcare services providers, professional societies, industry, healthcare management/economists, and healthcare policy makers. In the development, marketing, adoption, and implementation of these tools and technologies, communication, training, cultural sensitivity, and end-user customization are critical pieces to the process. Next-generation tools and technologies are vehicles toward personalized medicine, extending the telemedicine model to include cell phones and Internet-based telecommunications tools for remote and home health management with video assessment, remote bedside monitoring, and patient-specific care tools with event logs, patient electronic profile, and physician note-writing capability. Telehealth is ultimately a system of systems in scale and complexity. To cover the full spectrum of dynamic and evolving needs of end-users, we must appreciate system complexity as telehealth moves toward increasing functionality, integration, interoperability, outreach, and quality of service. Toward that end, our group addressed three overarching questions: (1) What are the high-impact topics? (2) What are the barriers to progress? and (3) What roles can the National Institutes of Health and its various institutes and centers play in fostering the future development of telehealth?

Impact of design research on industrial practice tools, technology, and training

CERN Document Server

Lindemann, Udo

2016-01-01

Showcasing exemplars of how various aspects of design research were successfully transitioned into and influenced, design practice, this book features chapters written by eminent international researchers and practitioners from industry on the Impact of Design Research on Industrial Practice. Chapters written by internationally acclaimed researchers of design analyse the findings (guidelines, methods and tools), technologies/products and educational approaches that have been transferred as tools, technologies and people to transform industrial practice of engineering design, whilst the chapters that are written by industrial practitioners describe their experience of how various tools, technologies and training impacted design practice. The main benefit of this book, for educators, researchers and practitioners in (engineering) design, will be access to a comprehensive coverage of case studies of successful transfer of outcomes of design research into practice; as well as guidelines and platforms for successf...

A Call for a Community of Practice to Assess the Impact of Emerging Technologies on Undergraduate Biology Education

Directory of Open Access Journals (Sweden)

Jamie L. Jensen

2012-02-01

Full Text Available Recent recommendations for educational research encourage empirically tested, theory-based, completely transparent, and broadly applicable studies. In light of these recommendations, we call for a research standard and community of practice in the evaluation of technology use in the undergraduate life science classroom. We outline appropriate research methodology, review and critique the past research on technology usage and, lastly, suggest a new and improved focus for research on emerging technologies.

Web Surveys to Digital Movies: Technological Tools of the Trade.

Science.gov (United States)

Fetterman, David M.

2002-01-01

Highlights some of the technological tools used by educational researchers today, focusing on data collection related tools such as Web surveys, digital photography, voice recognition and transcription, file sharing and virtual office, videoconferencing on the Internet, instantaneous chat and chat rooms, reporting and dissemination, and digital…

Rensselaer Component of the Terascale Simulation Tools and Technologies. Final Report

International Nuclear Information System (INIS)

Shephard, Mark S.

2009-01-01

The Terascale Simulation Tools and Technologies (TSTT) SciDAC center focused on the development and application on SciDAC applications of advanced technologies to support unstructured grid simulations. As part of the TSTT team the RPI group focused on developing automated adaptive mesh control tools and working with SciDAC accelerator and fusion applications on the use of these technologies to execute their simulations. The remainder of this report provides a brief summary of the efforts carried out by the RPI team to support SciDAC applications (Section 2) and to develop the TSTT technologies needed for those automated adaptive simulations (Section 3). More complete information on the technical developments can be found in the cited references and previous progress reports.

Diagnostic framework and health check tool for engineering and technology projects

Directory of Open Access Journals (Sweden)

Simon P Philbin

2014-10-01

Full Text Available Purpose: Development of a practitioner oriented diagnostic framework and health check tool to support the robust assessment of engineering and technology projects.Design/methodology/approach: The research is based on a literature review that draws together insights on project assessment and critical success factors to establish an integrated systems view of projects. This is extended to allow a comprehensive diagnostic framework to be developed along with a high-level health check tool that can be readily deployed on projects. The utility of the diagnostic framework and health check tool are explored through three illustrative case studies, with two from Canada and one from the United Kingdom. Findings andOriginality/value: The performance of engineering and technology projects can be viewed through a systems perspective and being a function of six sub-systems that are: process, technology, resources, impact, knowledge and culture. The diagnostic framework that is developed through this research integrates these sub-systems to provide a comprehensive assessment methodology for projects, which is linked to existing best practice for project reviews, performance management and maturity models. The case studies provide managerial insights that are related to the diagnostic framework but crucially also position the approach in the context of industrial applications for construction engineering and technology management.Research limitations/implications: The case study approach includes two case studies from the construction and facilities development sector with the third case study from the research and technology sector. Further work is required to investigate the use of the diagnostic framework and health check tool in other sectors.Practical implications: The health check tool will be of practical benefit to new projects managers that require access to a robust and convenient project review methodology for assessing the status and health of a

Call Centre- Computer Telephone Integration

Directory of Open Access Journals (Sweden)

Dražen Kovačević

2012-10-01

Full Text Available Call centre largely came into being as a result of consumerneeds converging with enabling technology- and by the companiesrecognising the revenue opportunities generated by meetingthose needs thereby increasing customer satisfaction. Regardlessof the specific application or activity of a Call centre, customersatisfaction with the interaction is critical to the revenuegenerated or protected by the Call centre. Physical(v, Call centreset up is a place that includes computer, telephone and supervisorstation. Call centre can be available 24 hours a day - whenthe customer wants to make a purchase, needs information, orsimply wishes to register a complaint.

The Effect of Length of Exposure to CALL Technology on Young Iranian EFL Learners' Grammar Gain

Science.gov (United States)

Sadeghi, Karim; Dousti, Masoumeh

2013-01-01

In the twenty-first century, integration of technology into education is a force worthy of contemplation. Among all the possible technological tools that can be integrated into EFL classes, computers seem to have achieved a more dominant position. One of the outstanding features of computers is their potential to present educational games and to…

Impact of mobility on call block, call drops and optimal cell size in small cell networks

OpenAIRE

Ramanath , Sreenath; Voleti , Veeraruna Kavitha; Altman , Eitan

2011-01-01

We consider small cell networks and study the impact of user mobility. Assuming Poisson call arrivals at random positions with random velocities, we discuss the characterization of handovers at the boundaries. We derive explicit expressions for call block and call drop probabilities using tools from spatial queuing theory. We also derive expressions for the average virtual server held up time. These expressions are used to derive optimal cell sizes for various profile of velocities in small c...

Science Teaching Orientations and Technology-Enhanced Tools for Student Learning

Science.gov (United States)

Campbell, Todd; Longhurst, Max; Duffy, Aaron M.; Wolf, Paul G.; Shelton, Brett E.

2013-01-01

This qualitative study examines teacher orientations and technology-enhanced tools for student learning within a science literacy framework. Data for this study came from a group of 10 eighth grade science teachers. Each of these teachers was a participant in a professional development (PD) project focused on reformed and technology-enhanced…

Integrating heterogeneous healthcare call centers.

Science.gov (United States)

Peschel, K M; Reed, W C; Salter, K

1998-01-01

In a relatively short period, OHS has absorbed multiple call centers supporting different LOBs from various acquisitions, functioning with diverse standards, processes, and technologies. However, customer and employee satisfaction is predicated on OHS's ability to thoroughly integrate these heterogeneous call centers. The integration was initiated and has successfully progressed through a balanced program of focused leadership and a defined strategy which includes site consolidation, sound performance management philosophies, and enabling technology. Benefits have already been achieved with even more substantive ones to occur as the integration continues to evolve.

Integrating information technologies as tools for surgical research.

Science.gov (United States)

Schell, Scott R

2005-10-01

Surgical research is dependent upon information technologies. Selection of the computer, operating system, and software tool that best support the surgical investigator's needs requires careful planning before research commences. This manuscript presents a brief tutorial on how surgical investigators can best select these information technologies, with comparisons and recommendations between existing systems, software, and solutions. Privacy concerns, based upon HIPAA and other regulations, now require careful proactive attention to avoid legal penalties, civil litigation, and financial loss. Security issues are included as part of the discussions related to selection and application of information technology. This material was derived from a segment of the Association for Academic Surgery's Fundamentals of Surgical Research course.

The fragmented character of Middle Palaeolithic stone tool technology.

Science.gov (United States)

Turq, Alain; Roebroeks, Wil; Bourguignon, Laurence; Faivre, Jean-Philippe

2013-11-01

The importance of the transport of stone artefacts in structuring Neandertal lithic assemblages has often been addressed, but the degree to which this led to fragmentation of lithic reduction over Middle Palaeolithic landscapes has not been explicitly studied thus far. Large-scale excavations of Middle Palaeolithic open-air sites and refitting studies of the retrieved assemblages have yielded new, high-resolution data on the mobile aspects of Neandertal stone tool technology. In this paper, we integrate lithic technology and raw material data from recent studies of Middle Palaeolithic open-air and rock shelter sites in Western Europe. We demonstrate that the results of a variety of typological, technological (especially refitting), and lithological studies have important consequences for our knowledge of the acquisition of raw materials and subsequent production, usage and discard of stone artefacts in the Middle Palaeolithic. Neandertal production and use of stone tools was fragmented in three domains: the spatial, the temporal and the social domain. We show that this versatile segmentation of stone artefact handling strategies is a main determinant of the character of the Neandertal archaeological record. Our data testify to ubiquitous and continuous transport of stone artefacts of a wide variety of forms, picked by Neandertals using selection criteria that were sometimes far removed from what archaeologists have traditionally considered, and to some degree still consider, to be desired end products of knapping activities. The data presented here testify to the variability and versatility of Middle Palaeolithic stone tool technology, whose fragmented character created very heterogeneous archaeological assemblages, usually the product of a wide variety of independent import, use, discard and/or subsequent transport events. Copyright © 2013 Elsevier Ltd. All rights reserved.

A machine learning model to determine the accuracy of variant calls in capture-based next generation sequencing.

Science.gov (United States)

van den Akker, Jeroen; Mishne, Gilad; Zimmer, Anjali D; Zhou, Alicia Y

2018-04-17

Next generation sequencing (NGS) has become a common technology for clinical genetic tests. The quality of NGS calls varies widely and is influenced by features like reference sequence characteristics, read depth, and mapping accuracy. With recent advances in NGS technology and software tools, the majority of variants called using NGS alone are in fact accurate and reliable. However, a small subset of difficult-to-call variants that still do require orthogonal confirmation exist. For this reason, many clinical laboratories confirm NGS results using orthogonal technologies such as Sanger sequencing. Here, we report the development of a deterministic machine-learning-based model to differentiate between these two types of variant calls: those that do not require confirmation using an orthogonal technology (high confidence), and those that require additional quality testing (low confidence). This approach allows reliable NGS-based calling in a clinical setting by identifying the few important variant calls that require orthogonal confirmation. We developed and tested the model using a set of 7179 variants identified by a targeted NGS panel and re-tested by Sanger sequencing. The model incorporated several signals of sequence characteristics and call quality to determine if a variant was identified at high or low confidence. The model was tuned to eliminate false positives, defined as variants that were called by NGS but not confirmed by Sanger sequencing. The model achieved very high accuracy: 99.4% (95% confidence interval: +/- 0.03%). It categorized 92.2% (6622/7179) of the variants as high confidence, and 100% of these were confirmed to be present by Sanger sequencing. Among the variants that were categorized as low confidence, defined as NGS calls of low quality that are likely to be artifacts, 92.1% (513/557) were found to be not present by Sanger sequencing. This work shows that NGS data contains sufficient characteristics for a machine-learning-based model to

Choosing Technology Tools to Meet Pronunciation Teaching and Learning Goals

Science.gov (United States)

Yoshida, Marla Tritch

2018-01-01

For decades, researchers and teachers have suggested ways to apply technology in teaching and learning pronunciation, and there are many useful tools that can be used for this purpose. However, many teachers feel unsure about how to teach pronunciation at all, and the idea of using computers, mobile devices, or other technology may make…

Building the Technology Toolkit of Marketing Students: The Emerging Technologies in Marketing Initiative

Science.gov (United States)

Miller, Fred L.; Mangold, W. Glynn; Roach, Joy; Holmes, Terry

2013-01-01

New information technologies are transforming marketing practice, leading to calls for marketing academics to focus their research and teaching more tightly on areas relevant to practitioners. Developments in e-commerce, business geographic information systems (GIS), and social media offer powerful marketing tools to nontechnical users. This paper…

ART-Ada: An Ada-based expert system tool

Science.gov (United States)

Lee, S. Daniel; Allen, Bradley P.

1991-01-01

The Department of Defense mandate to standardize on Ada as the language for software systems development has resulted in increased interest in making expert systems technology readily available in Ada environments. NASA's Space Station Freedom is an example of the large Ada software development projects that will require expert systems in the 1990's. Another large scale application that can benefit from Ada based expert system tool technology is the Pilot's Associate (PA) expert system project for military combat aircraft. Automated Reasoning Tool (ART) Ada, an Ada Expert system tool is described. ART-Ada allow applications of a C-based expert system tool called ART-IM to be deployed in various Ada environments. ART-Ada is being used to implement several prototype expert systems for NASA's Space Station Freedom Program and the U.S. Air Force.

Use and clinical efficacy of standard and health information technology fall risk assessment tools.

Science.gov (United States)

Teh, Ruth C; Wilson, Anne; Ranasinghe, Damith; Visvanathan, Renuka

2017-12-01

To evaluate the health information technology (HIT) compared to Fall Risk for Older Persons (FROP) tool in fall risk screening. A HIT tool trial was conducted on the geriatric evaluation and management (GEM, n = 111) and acute medical units (AMU, n = 424). Health information technology and FROP scores were higher on GEM versus AMU, with no differences between people who fell and people who did not fall. Both score completion rates were similar, and their values correlated marginally (Spearman's correlation coefficient 0.33, P falls. Hospital fall rates trended towards reduction on AMU (4.20 vs 6.96, P = 0.15) and increase on GEM (10.98 vs 6.52, P = 0.54) with HIT tool implementation. Health information technology tool acceptability and scoring were comparable to FROP screening, with mixed effects on fall rate with HIT tool implementation. Clinician partnership remains key to effective tool development. © 2017 AJA Inc.

Research Tools and Materials | NCI Technology Transfer Center | TTC

Science.gov (United States)

Research Tools can be found in TTC's Available Technologies and in scientific publications. They are freely available to non-profits and universities through a Material Transfer Agreement (or other appropriate mechanism), and available via licensing to companies.

Does Online Technology Make Us More or Less Sociable? A Preliminary Review and Call for Research.

Science.gov (United States)

Waytz, Adam; Gray, Kurt

2018-05-01

How does online technology affect sociability? Emerging evidence-much of it inconclusive-suggests a nuanced relationship between use of online technology (the Internet, social media, and virtual reality) and sociability (emotion recognition, empathy, perspective taking, and emotional intelligence). Although online technology can facilitate purely positive behavior (e.g., charitable giving) or purely negative behavior (e.g., cyberbullying), it appears to affect sociability in three ways, depending on whether it allows a deeper understanding of people's thoughts and feelings: (a) It benefits sociability when it complements already-deep offline engagement with others, (b) it impairs sociability when it supplants deeper offline engagement for superficial online engagement, and (c) it enhances sociability when deep offline engagement is otherwise difficult to attain. We suggest potential implications and moderators of technology's effects on sociability and call for additional causal research.

NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box

Science.gov (United States)

ONeil, D. A.; Craig, D. A.; Christensen, C. B.; Gresham, E. C.

2005-01-01

The objective of this Technical Interchange Meeting was to increase the quantity and quality of technical, cost, and programmatic data used to model the impact of investing in different technologies. The focus of this meeting was the Technology Tool Box (TTB), a database of performance, operations, and programmatic parameters provided by technologists and used by systems engineers. The TTB is the data repository used by a system of models known as the Advanced Technology Lifecycle Analysis System (ATLAS). This report describes the result of the November meeting, and also provides background information on ATLAS and the TTB.

The Geek Perspective: Answering the Call for Advanced Technology in Research Inquiry Related to Pediatric Brain Injury and Motor Disability.

Science.gov (United States)

Wininger, Michael; Pidcoe, Peter

2017-10-01

The Academy of Pediatric Physical Therapy Research Summit IV issued a Call to Action for community-wide intensification of a research enterprise in inquiries related to pediatric brain injury and motor disability by way of technological integration. But the barriers can seem high, and the pathways to integrative clinical research can seem poorly marked. Here, we answer the Call by providing framework to 3 objectives: (1) instrumentation, (2) biometrics and study design, and (3) data analytics. We identify emergent cases where this Call has been answered and advocate for others to echo the Call both in highly visible physical therapy venues and in forums where the audience is diverse.

The Choices and Uses of Technological Tools in High School Government Classes

OpenAIRE

Wigginton, Erin O'Donnell

2011-01-01

The purpose of this study was to examine how government teachers make decisions regarding the type of technological tools they incorporate in their instruction. As a case study of two teachers, this work was oriented by the question: How are U.S. Government teachers' beliefs and perspectives about learning and teaching reflected in their pedagogical practice and use of technological tools. There is little work about how teachers prepare students for the 21st century. Teaching U.S. Gove...

Providing Formative Feedback: Language Technologies for Lifelong Learning CONSPECT tool

NARCIS (Netherlands)

Berlanga, Adriana

2011-01-01

Berlanga, A. J. (2011). Providing Formative Feedback: Language Technologies for Lifelong Learning CONSPECT tool. Presentation given at the Onderwijslunch, University of Maastricht. January, 18, 2011, Maastricht, The Netherlands.

Hybrid tooling technologies and standardization for the manufacturing of inserts for micro injection molding

DEFF Research Database (Denmark)

Tosello, Guido; Fillon, Bertrand; Azcarate, Sabino

2007-01-01

This paper is based on the European Platform’s activities within the 4M Network of Excellence “Multi-Material Micro Manufacturing”. To overpass limitations of the current existing micro tooling capabilities, a new generation of micro hybrid tooling technologies for micro replication was developed....... A metrological approach was applied to standardize the employed tooling processes (micro milling, µEDM, laser micromachining, electrochemical µ-milling). The micro tools were then tested with different polymers (PP, PP + nano fillers, PC, COC). The paper provides a comparison of these technologies concerning...

BUSINESS MODELS FOR EXTENDING OF 112 EMERGENCY CALL CENTER CAPABILITIES WITH E-CALL FUNCTION INSERTION

Directory of Open Access Journals (Sweden)

Pop Dragos Paul

2010-12-01

Full Text Available The present article concerns present status of implementation in Romania and Europe of eCall service and the proposed business models regarding eCall function implementation in Romania. eCall system is used for reliable transmission in case of crush between In Vehicle System and Public Service Answering Point, via the voice channel of cellular and Public Switched Telephone Network (PSTN. eCall service could be initiated automatically or manual the driver. All data presented in this article are part of researches made by authors in the Sectorial Contract Implementation study regarding eCall system, having as partners ITS Romania and Electronic Solution, with the Romanian Ministry of Communication and Information Technology as beneficiary.

Intimate Technology: A Tool for Teaching Anti-Racism in Social Work Education

Science.gov (United States)

Deepak, Anne C.; Biggs, Mary Jo Garcia

2011-01-01

In this article, the authors introduce a new conceptual tool, intimate technology, to mobilize social work students' commitment to anti-racism. Intimate technology is marked by its emotional intensity and accessibility, and its effect of de-centering knowledge and authority. This teaching strategy integrates the modality of intimate technology via…

PISCES: A Tool for Predicting Software Testability

Science.gov (United States)

Voas, Jeffrey M.; Miller, Keith W.; Payne, Jeffery E.

1991-01-01

Before a program can fail, a software fault must be executed, that execution must alter the data state, and the incorrect data state must propagate to a state that results directly in an incorrect output. This paper describes a tool called PISCES (developed by Reliable Software Technologies Corporation) for predicting the probability that faults in a particular program location will accomplish all three of these steps causing program failure. PISCES is a tool that is used during software verification and validation to predict a program's testability.

The State and Pattern of Health Information Technology Adoption

National Research Council Canada - National Science Library

Fonkych, Kateryna; Taylor, Roger

2005-01-01

... Electronic Medical Record Systems (EMR-S) and Clinical Decision Support tools, has occurred. Government intervention has been called for to speed the adoption process for Health Information Technology (HIT...

Leveraging management information in improving call centre productivity

Directory of Open Access Journals (Sweden)

Manthisana Mosese

2016-04-01

Objectives: This research explored the use of management information and its impact on two fundamental functions namely, improving productivity without compromising the quality of service, in the call centre of a well-known South African fashion retailer, Edcon. Following the implementation of the call centre technology project the research set out to determine how Edcon can transform their call centre to improve productivity and customer service through effective utilisation of their management information. Method: Internal documents and reports were analysed to provide the basis of evaluation between the measures of productivity prior to and post the implementation of a technology project at Edcon’s call centre. Semi-structured in-depth and group interviews were conducted to establish the importance and use of management information in improving productivity and customer service. Results: The results indicated that the availability of management information has indeed contributed to improved efficiency at the Edcon call centre. Although literature claims that there is a correlation between a call centre technology upgrade and improvement in performance, evident in the return on investment being realised within a year or two of implementation, it fell beyond the scope of this study to investigate the return on investment for Edcon’s call centre. Conclusion: Although Edcon has begun realising benefits in improved productivity in their call centre from their available management information, information will continue to play a crucial role in supporting management with informed decisions that will improve the call centre operations. [pdf to follow

Lightweight solar array blanket tooling, laser welding and cover process technology

Science.gov (United States)

Dillard, P. A.

1983-01-01

A two phase technology investigation was performed to demonstrate effective methods for integrating 50 micrometer thin solar cells into ultralightweight module designs. During the first phase, innovative tooling was developed which allows lightweight blankets to be fabricated in a manufacturing environment with acceptable yields. During the second phase, the tooling was improved and the feasibility of laser processing of lightweight arrays was confirmed. The development of the cell/interconnect registration tool and interconnect bonding by laser welding is described.

The Right Tools for the Job--Technology Options for Adult Online Learning and Collaboration

Science.gov (United States)

Regional Educational Laboratory, 2014

2014-01-01

Many options exist for using technology as a tool for adult learning, and each day, it becomes easier to share information online than it ever has been. Online learning technology has grown from one-sided communications to numerous options for audience engagement and interactivity. This guide introduces a variety of tools, online platforms, and…

Investigating CALL in the Classroom: Situational Variables to Consider

Directory of Open Access Journals (Sweden)

Darlene Liutkus

2012-01-01

Full Text Available A new paradigm in second language pedagogy has Computer Assisted Language Learning (CALL playing a significant role. Much of the literature to-date claims that CALL can have a positive impact on students’ second language acquisition (SLA. Mixed method of research produces data to investigate if CALL positively affects student language proficiency, motivation and autonomy. Classroom observation of participants in their natural environment is a qualitative technique used but has situational variables that could skew results if not structured. A questionnaire is a quantitative tool that can offer insight regarding participants’ perception of performance but can contradict what the researcher has observed. This paper will take an in-depth look at variables such as: instructor’s pedagogical application; blending CALL into the curriculum; types of CALL implemented; feedback received and their implications for design of the data collection tools

Model-based quality assessment and base-calling for second-generation sequencing data.

Science.gov (United States)

Bravo, Héctor Corrada; Irizarry, Rafael A

2010-09-01

Second-generation sequencing (sec-gen) technology can sequence millions of short fragments of DNA in parallel, making it capable of assembling complex genomes for a small fraction of the price and time of previous technologies. In fact, a recently formed international consortium, the 1000 Genomes Project, plans to fully sequence the genomes of approximately 1200 people. The prospect of comparative analysis at the sequence level of a large number of samples across multiple populations may be achieved within the next five years. These data present unprecedented challenges in statistical analysis. For instance, analysis operates on millions of short nucleotide sequences, or reads-strings of A,C,G, or T's, between 30 and 100 characters long-which are the result of complex processing of noisy continuous fluorescence intensity measurements known as base-calling. The complexity of the base-calling discretization process results in reads of widely varying quality within and across sequence samples. This variation in processing quality results in infrequent but systematic errors that we have found to mislead downstream analysis of the discretized sequence read data. For instance, a central goal of the 1000 Genomes Project is to quantify across-sample variation at the single nucleotide level. At this resolution, small error rates in sequencing prove significant, especially for rare variants. Sec-gen sequencing is a relatively new technology for which potential biases and sources of obscuring variation are not yet fully understood. Therefore, modeling and quantifying the uncertainty inherent in the generation of sequence reads is of utmost importance. In this article, we present a simple model to capture uncertainty arising in the base-calling procedure of the Illumina/Solexa GA platform. Model parameters have a straightforward interpretation in terms of the chemistry of base-calling allowing for informative and easily interpretable metrics that capture the variability in

TECHNOLOGICAL TOOLS: FROM TECHNICAL AFFORDANCES TO EDUCATIONAL AFFORDANCES

Directory of Open Access Journals (Sweden)

Nicos Valanides

2018-04-01

Full Text Available The integration of these tools in education and in authentic and effective learning/teaching environments has become an issue of great concern among educators, researchers and other related audiences. All emphasize the need to design and develop technology-enhanced curricula and teaching/learning environments (formal, non-formal and informal that are developmentally appropriate for young and/or older learners. The vision is to integrate the tools and their associated technical affordance in teaching/learning environments in such a way, so that all learners, irrespective of their cognitive differences and abilities, could increase their learning gains, and develop the abilities and skills that are needed for citizens of the 21st century.

Computational methods, tools and data for nuclear analyses of fusion technology systems

International Nuclear Information System (INIS)

Fischer, U.

2006-01-01

An overview is presented of the Research and Development work conducted at Forschungszentrum Karlsruhe in co-operation with other associations in the framework of the European Fusion Technology Programme on the development and qualification of computational tools and data for nuclear analyses of Fusion Technology systems. The focus is on the development of advanced methods and tools based on the Monte Carlo technique for particle transport simulations, and the evaluation and qualification of dedicated nuclear data to satisfy the needs of the ITER and the IFMIF projects. (author)

Moving Materiality: People, Tools, and this Thing Called Disability

Directory of Open Access Journals (Sweden)

Danielle Peers

2017-08-01

Full Text Available This body is wheelchair-bound. Not in the sense of the ableist idiom, but literally: bound to a nine-pound titanium frame through Velcro and ratchet straps ripped from snowboards. This wheelchair is body-bound, bound to the flick of a hip against strapping, pulling through plastic and metal and rubber and gravity and wood, into a tilt onto one wheel. This metal, this flesh, this materiality is bound, too, by rhythm and soundscape: chairs crashing; prodding questions; polite onlookers, silent; the percussive thud of wheels on uneven terrain. It is bound to the gaze of audience and reader and performer and lover. It is bound with the discourses of (disability, in(terdependence, materiality and boundedness. This essay too, is wheelchair-body-bound. It is bound to explorations of previous works on the practices, discourses, and materialities of the wheelchair. It is bound by the authors’ personal narratives of living, playing, moving and thinking with, in and through various wheelchairs and other technologies of (immobility. It is bound through critical artistic engagement: bound with thinking and, literally, dancing through the ways that flesh-chair-discourse-power bind in the form of a subject, or an articulation, or an assemblage. Finally, this essay is bound through an unabashed and unbounded passion for the exploration of the local, specific, strategic, accidental, and creative ways that one may remake or even re-imagine the bonding of their tools, communities, ideas, bodies, and mobilities.

Ultrasound call detection in capybara

Directory of Open Access Journals (Sweden)

Selene S.C. Nogueira

2012-07-01

Full Text Available The vocal repertoire of some animal species has been considered a non-invasive tool to predict distress reactivity. In rats ultrasound emissions were reported as distress indicator. Capybaras[ vocal repertoire was reported recently and seems to have ultrasound calls, but this has not yet been confirmed. Thus, in order to check if a poor state of welfare was linked to ultrasound calls in the capybara vocal repertoire, the aim of this study was to track the presence of ultrasound emissions in 11 animals under three conditions: 1 unrestrained; 2 intermediately restrained, and 3 highly restrained. The ultrasound track identified frequencies in the range of 31.8±3.5 kHz in adults and 33.2±8.5 kHz in juveniles. These ultrasound frequencies occurred only when animals were highly restrained, physically restrained or injured during handling. We concluded that these calls with ultrasound components are related to pain and restraint because they did not occur when animals were free of restraint. Thus we suggest that this vocalization may be used as an additional tool to assess capybaras[ welfare.

(abstract) Generic Modeling of a Life Support System for Process Technology Comparisons

Science.gov (United States)

Ferrall, J. F.; Seshan, P. K.; Rohatgi, N. K.; Ganapathi, G. B.

1993-01-01

This paper describes a simulation model called the Life Support Systems Analysis Simulation Tool (LiSSA-ST), the spreadsheet program called the Life Support Systems Analysis Trade Tool (LiSSA-TT), and the Generic Modular Flow Schematic (GMFS) modeling technique. Results of using the LiSSA-ST and the LiSSA-TT will be presented for comparing life support systems and process technology options for a Lunar Base and a Mars Exploration Mission.

Building heating technology in Smart Home using PI System management tools

OpenAIRE

Vanus, Jan; Vojcinak, Petr; Martinek, Radek; Kelnar, Michal; Machacek, Zdenek; Bilik, Petr; Koziorek, Jiri; Zidek, Jan

2016-01-01

For comfortable remote monitoring of some operational and technical functions inside own Smart Home building, it is possible to use a lot of useful programmes and tools. However, not each programme or tool is suited to this purpose, or it does not offer required functionality. The aim of this paper is to describe using an appropriate software tool of PI System for a real-time monitoring of acquired data from real technology parts located at a training centre of the Moravian-Silesian Wood Clus...

Factors Hindering the Integration of CALL in a Tertiary Institution

Directory of Open Access Journals (Sweden)

Izaham Shah Ismail

2008-12-01

Full Text Available The field of Computer Assisted Language Learning (CALL is a field that is constantly evolving as it is very much dependent on the advancement of computer technologies. With new technologies being invented almost every day, experts in the field are looking for ways to apply these new technologies in the language classroom. Despite that, teachers are said to be slow at adopting technology in their classrooms and language teachers, whether at schools or tertiary institutions, are no exception. This study attempts to investigate the factors that hinder ESL instructors at an institution of higher learning from integrating CALL in their lessons. Interviews were conducted with five ESL instructors and results revealed that factors which hinder them from integrating CALL in their teaching are universal factors such as knowledge in technology and pedagogy, computer facilities and resources, absence of exemplary integration of CALL, personal beliefs on language teaching, views on the role of a computers as teacher, and evaluation of learning outcomes.

Technology Combination Analysis Tool (TCAT) for Active Debris Removal

Science.gov (United States)

Chamot, B.; Richard, M.; Salmon, T.; Pisseloup, A.; Cougnet, C.; Axthelm, R.; Saunder, C.; Dupont, C.; Lequette, L.

2013-08-01

This paper present the work of the Swiss Space Center EPFL within the CNES-funded OTV-2 study. In order to find the most performant Active Debris Removal (ADR) mission architectures and technologies, a tool was developed in order to design and compare ADR spacecraft, and to plan ADR campaigns to remove large debris. Two types of architectures are considered to be efficient: the Chaser (single-debris spacecraft), the Mothership/ Kits (multiple-debris spacecraft). Both are able to perform controlled re-entry. The tool includes modules to optimise the launch dates and the order of capture, to design missions and spacecraft, and to select launch vehicles. The propulsion, power and structure subsystems are sized by the tool thanks to high-level parametric models whilst the other ones are defined by their mass and power consumption. Final results are still under investigation by the consortium but two concrete examples of the tool's outputs are presented in the paper.

Research on Key Technologies of Unit-Based CNC Machine Tool Assembly Design

OpenAIRE

Zhongqi Sheng; Lei Zhang; Hualong Xie; Changchun Liu

2014-01-01

Assembly is the part that produces the maximum workload and consumed time during product design and manufacturing process. CNC machine tool is the key basic equipment in manufacturing industry and research on assembly design technologies of CNC machine tool has theoretical significance and practical value. This study established a simplified ASRG for CNC machine tool. The connection between parts, semantic information of transmission, and geometric constraint information were quantified to as...

Tools, courses, and learning pathways offered by the National Interagency Fuels, Fire, and Vegetation Technology Transfer

Science.gov (United States)

Eva K. Strand; Kathy H. Schon; Jeff Jones

2010-01-01

Technological advances in the area of fuel and wildland fire management have created a need for effective decision support tools and technology training. The National Interagency Fuels Committee and LANDFIRE have chartered a team to develop science-based learning tools for assessment of fire and fuels and to provide online training and technology transfer to help...

Comparison between Microfabrication Technologies for Metal Tooling

DEFF Research Database (Denmark)

Tang, Peter Torben

2005-01-01

of metal. The following technologies have been analysed: micromilling, microEDM (microelectro discharge machining, including wire-EDM, sinking-EDM and EDM-milling), laser micromachining, electroforming and ECF (an innovative process proposed by HSG-IMAT). Considered materials are nickel for electroforming......, stainless steel for ECF, and tool steel (AISI H13) for the other processes. Typical features (ribs, channels, pins and holes) required by microoptics, microfluidics and sensors and actuators applications have been selected to carry out this analysis The task results provide a global comparison between...

Adapting a Technology-Based Implementation Support Tool for Community Mental Health: Challenges and Lessons Learned.

Science.gov (United States)

Livet, Melanie; Fixsen, Amanda

2018-01-01

With mental health services shifting to community-based settings, community mental health (CMH) organizations are under increasing pressure to deliver effective services. Despite availability of evidence-based interventions, there is a gap between effective mental health practices and the care that is routinely delivered. Bridging this gap requires availability of easily tailorable implementation support tools to assist providers in implementing evidence-based intervention with quality, thereby increasing the likelihood of achieving the desired client outcomes. This study documents the process and lessons learned from exploring the feasibility of adapting such a technology-based tool, Centervention, as the example innovation, for use in CMH settings. Mixed-methods data on core features, innovation-provider fit, and organizational capacity were collected from 44 CMH providers. Lessons learned included the need to augment delivery through technology with more personal interactions, the importance of customizing and integrating the tool with existing technologies, and the need to incorporate a number of strategies to assist with adoption and use of Centervention-like tools in CMH contexts. This study adds to the current body of literature on the adaptation process for technology-based tools and provides information that can guide additional innovations for CMH settings.

Acceptance factors for the use of video call via smartphone by blind people

OpenAIRE

Tamanit Chanjaraspong

2017-01-01

Using video call via smartphones is a new technology for blind people which can be applied to facilitate their daily lives. This video call technology is different from old technology and the technology acceptance has changed users' behavior in society, culture, and especially attitude toward using new technology. This research studied the intention and the need to use video call via smartphone by blind people according to the Technology Acceptance Model, a famous and widely-accepted theory f...

Information and Communication Technology Tools in Support to the Executive Secretary Activities

Directory of Open Access Journals (Sweden)

Márcia Maria de Medeiros Travassos Saeger Martins

2015-08-01

Full Text Available Executive Secretary who longs to stand in organizations should seek to meet market requirements, with primary knowledge about information and communication technology. Its attributions, proper to modern management standards, must be carried out so that this professional can assist managers efficiently. In order to do so, Executive Secretary should make use of tools that aid in speeding up their actions, becoming more productive. In this context, this research was carried out with the Executive Secretaries and students who already work in the area or who are in trainning programs, aiming to investigate the use of Information and Communication Technology tools in the Executive Secretary work. Data collection was done through a structured questionnaire with objective questions, applied on Campus IV/UFPB, whose data were analyzed quantitatively, with results presented in tables and graphs. Based on the results, it was possible to consider that most respondents use ICT tools in their secretarial assignments, such as the computer and the internet. It was found that the majority believes that the use of these tools helps in managing their time when it comes to their duties. Among those who do not make use of ICT tools, most claimed that the organizations in which they work do not have these tools.

Contemporary Marketing Tools Used from Bulgarian Private Dentists

Directory of Open Access Journals (Sweden)

Kazakova S.

2014-09-01

Full Text Available This study examines the use of different marketing tools among dentists for the development of private dental practices. Material and methods: A phone call survey was conducted. The survey consisted of questions related to the use of different marketing tools used by dentists for the development of their practices. Results: The most used contemporary marketing tools from Bulgarian dentist are the presence of web site (24.3% and social media advertisement (21.57%. The less used tools are media advertisement (0.68% and the use of flyers (1.36%. Conclusion: Dentists are not well acquainted with the contemporary marketing tools. The internal marketing is most secure tool for attracting new patients. Internet technology gives opportunity for additional form of rapid communication and advertisement on a moderate price.

Contemporary Marketing Tools Used from Bulgarian Private Dentists

Directory of Open Access Journals (Sweden)

Kazakova S

2014-01-01

Full Text Available ABSTRACT This study examines the use of different marketing tools among dentists for the development of private dental practices. Material and methods A phone call survey was conducted. The survey consisted of questions related to the use of different marketing tools used by dentists for the development of their practices. Results The most used contemporary marketing tools from Bulgarian dentist are the presence of web site (24.3% and social media advertisement (21.57%. The less used tools are media advertisement (0.68% and the use of flyers (1.36%. Conclusion Dentists are not well acquainted with the contemporary marketing tools. The internal marketing is most secure tool for attracting new patients. Internet technology gives opportunity for additional form of rapid communication and advertisement on a moderate price.

Outsourcing an Effective Postdischarge Call Program

Science.gov (United States)

Meek, Kevin L.; Williams, Paula; Unterschuetz, Caryn J.

2018-01-01

To improve patient satisfaction ratings and decrease readmissions, many organizations utilize internal staff to complete postdischarge calls to recently released patients. Developing, implementing, monitoring, and sustaining an effective call program can be challenging and have eluded some of the renowned medical centers in the country. Using collaboration with an outsourced vendor to bring state-of-the-art call technology and staffed with specially trained callers, health systems can achieve elevated levels of engagement and satisfaction for their patients postdischarge. PMID:29494453

Technologies as Support Tools for Persons with Autistic Spectrum Disorder: A Systematic Review

Directory of Open Access Journals (Sweden)

Nuria Aresti-Bartolome

2014-08-01

Full Text Available This study analyzes the technologies most widely used to work on areas affected by the Autistic Spectrum Disorder (ASD. Technologies can focus on the strengths and weaknesses of this disorder as they make it possible to create controlled environments, reducing the anxiety produced by real social situations. Extensive research has proven the efficiency of technologies as support tools for therapy and their acceptation by ASD sufferers and the people who are with them on a daily basis. This article is organized by the types of systems developed: virtual reality applications, telehealth systems, social robots and dedicated applications, all of which are classified by the areas they center on: communication, social learning and imitation skills and other ASD-associated conditions. 40.5% of the research conducted is found to be focused on communication as opposed to 37.8% focused on learning and social imitation skills and 21.6% which underlines problems associated with this disorder. Although most of the studies reveal how useful these tools are in therapy, they are generic tools for ASD sufferers in general, which means there is a lack of personalised tools to meet each person’s needs.

Technologies as Support Tools for Persons with Autistic Spectrum Disorder: A Systematic Review

Science.gov (United States)

Aresti-Bartolome, Nuria; Garcia-Zapirain, Begonya

2014-01-01

This study analyzes the technologies most widely used to work on areas affected by the Autistic Spectrum Disorder (ASD). Technologies can focus on the strengths and weaknesses of this disorder as they make it possible to create controlled environments, reducing the anxiety produced by real social situations. Extensive research has proven the efficiency of technologies as support tools for therapy and their acceptation by ASD sufferers and the people who are with them on a daily basis. This article is organized by the types of systems developed: virtual reality applications, telehealth systems, social robots and dedicated applications, all of which are classified by the areas they center on: communication, social learning and imitation skills and other ASD-associated conditions. 40.5% of the research conducted is found to be focused on communication as opposed to 37.8% focused on learning and social imitation skills and 21.6% which underlines problems associated with this disorder. Although most of the studies reveal how useful these tools are in therapy, they are generic tools for ASD sufferers in general, which means there is a lack of personalised tools to meet each person’s needs. PMID:25093654

Firearm microstamping technology: counterinsurgency intelligence gathering tool

Science.gov (United States)

Lizotte, Todd E.; Ohar, Orest P.

2009-05-01

Warfare relies on effective, accurate and timely intelligence an especially critical task when conducting a counterinsurgency operation [1]. Simply stated counterinsurgency is an intelligence war. Both insurgents and counterinsurgents need effective intelligence capabilities to be successful. Insurgents and counterinsurgents therefore attempt to create and maintain intelligence networks and fight continuously to neutralize each other's intelligence capabilities [1][2]. In such an environment it is obviously an advantage to target or proactively create opportunities to track and map an insurgent movement. Quickly identifying insurgency intelligence assets (Infiltrators) within a host government's infrastructure is the goal. Infiltrators can occupy various areas of government such as security personnel, national police force, government offices or military units. Intentional Firearm Microstamping offers such opportunities when implemented into firearms. Outfitted within firearms purchased and distributed to the host nation's security forces (civilian and military), Intentional Firearm Microstamping (IFM) marks bullet cartridge casings with codes as they are fired from the firearm. IFM is incorporated onto optimum surfaces with the firearm mechanism. The intentional microstamp tooling marks can take the form of alphanumeric codes or encoded geometric codes that identify the firearm. As the firearm is discharged the intentional tooling marks transfer a code to the cartridge casing which is ejected out of the firearm. When recovered at the scene of a firefight or engagement, the technology will provide forensic intelligence allowing the mapping and tracking of small arms traffic patterns within the host nation or identify insurgency force strength and pinpoint firearm sources, such as corrupt/rogue military units or police force. Intentional Firearm Microstamping is a passive mechanical trace technology that can be outfitted or retrofitted to semiautomatic handguns and

An integrated environment for developing object-oriented CAE tools

Energy Technology Data Exchange (ETDEWEB)

Hofmann, P.; Ryba, M.; Baitinger, U.G. [Integrated System Engeneering, Stuttgart (Germany)

1996-12-31

This paper presents how object oriented techniques can applied to improve the development of CAE tools. For the design of modular and reusable software systems we use predefined and well tested building blocks. These building blocks are reusable software components based on object-oriented technology which allows the assembling of software systems. Today CAE tools are typically very complex and computation extensive. Therefore we need a concept, that join the advantages of the object-oriented paradigm with the advantages of parallel and distributed programming. So we present a design environment for the development of concurrent-object oriented CAE tools called CoDO.

Field-programmable custom computing technology architectures, tools, and applications

CERN Document Server

Luk, Wayne; Pocek, Ken

2000-01-01

Field-Programmable Custom Computing Technology: Architectures, Tools, and Applications brings together in one place important contributions and up-to-date research results in this fast-moving area. In seven selected chapters, the book describes the latest advances in architectures, design methods, and applications of field-programmable devices for high-performance reconfigurable systems. The contributors to this work were selected from the leading researchers and practitioners in the field. It will be valuable to anyone working or researching in the field of custom computing technology. It serves as an excellent reference, providing insight into some of the most challenging issues being examined today.

Promoting the Use of Online Social Technology as a Case-Based Learning Tool

Science.gov (United States)

Ractham, Peter; Chen, Charlie

2013-01-01

Social technology is proliferating and influencing different aspects of society. However, very few studies have examined the use of such a technology for a case-based learning pedagogy. This preliminary study investigates the use of social technology as a case-based learning tool to improve the effectiveness of case-based learning in the…

An Overview of Information Technology Tools Implementation in Supply Chain Management

Directory of Open Access Journals (Sweden)

Mahadi Hasan Miraz

2016-06-01

Full Text Available Information Technology (IT and its usage in administrations and across the supply chain has develop a factor of competitive benefit for numerous companies. This paper focuses the practice of IT tools for Supply Chain Management (SCM [10]. It also highlights the impact of IT in helping to rearrange the whole delivery set up to accomplish advanced service levels and lower inventory and lower supply chain charges [10]. An overview and perceptible benefits of the present IT tools that are extensively organized is also providing with focus on current configurations considerations, accessible applications. The role of existing communication technologies in making IT an enabler of SCM is highlighted by addressing a range of dissimilar point and initiative solutions in a diversity of supply chain settings.

Modeling energy technology choices. Which investment analysis tools are appropriate?

International Nuclear Information System (INIS)

Johnson, B.E.

1994-01-01

A variety of tools from modern investment theory appear to hold promise for unraveling observed energy technology investment behavior that often appears anomalous when analyzed using traditional investment analysis methods. This paper reviews the assumptions and important insights of the investment theories most commonly suggested as candidates for explaining the apparent ''energy technology investment paradox''. The applicability of each theory is considered in the light of important aspects of energy technology investment problems, such as sunk costs, uncertainty and imperfect information. The theories addressed include the capital asset pricing model, the arbitrage pricing theory, and the theory of irreversible investment. Enhanced net present value methods are also considered. (author)

Assessing call centers’ success:

Directory of Open Access Journals (Sweden)

Hesham A. Baraka

2013-07-01

This paper introduces a model to evaluate the performance of call centers based on the Delone and McLean Information Systems success model. A number of indicators are identified to track the call center’s performance. Mapping of the proposed indicators to the six dimensions of the D&M model is presented. A Weighted Call Center Performance Index is proposed to assess the call center performance; the index is used to analyze the effect of the identified indicators. Policy-Weighted approach was used to assume the weights with an analysis of different weights for each dimension. The analysis of the different weights cases gave priority to the User satisfaction and net Benefits dimension as the two outcomes from the system. For the input dimensions, higher priority was given to the system quality and the service quality dimension. Call centers decision makers can use the tool to tune the different weights in order to reach the objectives set by the organization. Multiple linear regression analysis was used in order to provide a linear formula for the User Satisfaction dimension and the Net Benefits dimension in order to be able to forecast the values for these two dimensions as function of the other dimensions

Nature of Technology: Implications for design, development, and enactment of technological tools in school science classrooms

Science.gov (United States)

Waight, Noemi; Abd-El-Khalick, Fouad

2012-12-01

This position paper provides a theory-based explanation informed by philosophy of technology (PoT) of the recurrent documented patterns often associated with attempts to enact technology-supported, inquiry-based approaches in precollege science classrooms. Understandings derived from the history of technological development in other domains (e.g. medicine, transportation, and warfare) reveal numerous parallels that help to explain these recurrent patterns. Historical analyses of major technologies reveal a conglomerate of factors that interact to produce benefits, as well as intended and unintended consequences. On a macro-scale, PoT facilitates understandings of how technologies interact and are impacted by individuals, society, institutions, economy, politics, and culture. At the micro-level, and most relevant to science education, PoT engages the inherent nature of technology along a number of key dimensions: role of culture and values, notions of technological progression, technology as part of systems, technological diffusion, technology as a fix, and the notions of expertise. Overall, the present analysis has implications for the design, development, implementation, and adoption of technological tools for use in precollege science education, and highlights the role of technology as both artifact and process.

Language teacher education in CALL: history and perspectives

Directory of Open Access Journals (Sweden)

Ana Cristina Biondo Salomão

2013-01-01

Full Text Available Over the last years, the new technologies have changed the way we relate to information and communicate with other people, which has brought on impact to foreign language teaching and learning, and, consequently, to the area of foreign language teacher education. The abbreviation CALL (Computer Assisted Language Learning has been used to designate the processes of language teaching and learning with the use of computers, and language teacher education in CALL to name teacher education for and with the use of new technologies, since a number of authors point to the interdependence of both processes. We intend in this article to present an overview of the literature of the area of language teacher education in CALL nowadays and discuss issues related to the use of new technologies concerning its integration to teacher education and the functional and institutional roles to be taken. We also present two proposals of teacher education with the use of new technologies which are being implemented and at the same time studied in Brazil, which we believe have essential elements for the development of language teachers for and with the use of new technologies currently.

Developing Indicators for a Classroom Observation Tool on Pedagogy and Technology Integration: A Delphi Study

Science.gov (United States)

Elmendorf, Douglas C.; Song, Liyan

2015-01-01

Rapid advances in technology and increased access to technology tools have created new instructional demands and expectations on teachers. Due to the ubiquitous presence of technology in K-12 schools, teachers are being observed on both their pedagogical and technology integration practices. Applying the technological pedagogical and content…

INFORMATION TECHNOLOGY: COMMODITY OR STRATEGICAL TOOL?

Directory of Open Access Journals (Sweden)

Luciene Braz Ferreira

2006-11-01

Full Text Available Since the sprouting of the informantion technology (IT and its use for the companies the relation between cost and benefit did not stay clear. This is a question that has been studied and analyzed in depth in the academic and organizacional environments. The results of the studies point with respect to two opposing sides: first, one believes that IT does not pass of a tool without strategical value. On the order side, enterprises work with idea thar IT is strategic solution for many problems for all levels and businesses. Beyond this paradox, the challenge exists to justify the high investiments in technology, since the companies, ahead of the high competitiveness the enterprises could not focus in efforts no productives. The theoretical paper does not intend to answer the question, but to only describe the aspects that lead to such doubt. For such, it describes some concepts of IT, the IT business value, analysis of he investmensts in IT and IT as a commodity. At the final, are presented the limitations of this theoretical reflection and the expositons on the concepts and of its difficult practical applicability.

Collaboration tools for the global accelerator network Workshop Report

CERN Document Server

Agarwal, D; Olson, J

2002-01-01

The concept of a ''Global Accelerator Network'' (GAN) has been put forward as a means for inter-regional collaboration in the operation of internationally constructed and operated frontier accelerator facilities. A workshop was held to allow representatives of the accelerator community and of the collaboratory development community to meet and discuss collaboration tools for the GAN environment. This workshop, called the Collaboration Tools for the Global Accelerator Network (GAN) Workshop, was held on August 26, 2002 at Lawrence Berkeley National Laboratory. The goal was to provide input about collaboration tools in general and to provide a strawman for the GAN collaborative tools environment. The participants at the workshop represented accelerator physicists, high-energy physicists, operations, technology tool developers, and social scientists that study scientific collaboration.

Collaboration tools for the global accelerator network: Workshop Report

International Nuclear Information System (INIS)

Agarwal, Deborah; Olson, Gary; Olson, Judy

2002-01-01

The concept of a ''Global Accelerator Network'' (GAN) has been put forward as a means for inter-regional collaboration in the operation of internationally constructed and operated frontier accelerator facilities. A workshop was held to allow representatives of the accelerator community and of the collaboratory development community to meet and discuss collaboration tools for the GAN environment. This workshop, called the Collaboration Tools for the Global Accelerator Network (GAN) Workshop, was held on August 26, 2002 at Lawrence Berkeley National Laboratory. The goal was to provide input about collaboration tools in general and to provide a strawman for the GAN collaborative tools environment. The participants at the workshop represented accelerator physicists, high-energy physicists, operations, technology tool developers, and social scientists that study scientific collaboration

Interactivity Technologies to Improve the Learning in Classrooms through the Cloud

Science.gov (United States)

Fardoun, Habib M.; Alghazzawi, Daniyal M.; Paules, Antonio

2018-01-01

In this paper, the authors present a cloud system that incorporate tools developed in HTML5 and JQuery technologies, which are offered to professors and students in the development of a teaching methodology called flipped classroom, where the theoretical content is usually delivered by video files and self-assessment tools that students can…

The evaluations of facebook as an educational technology tools in ...

African Journals Online (AJOL)

Entrepreneurship is integrated into the curriculum structure designed for students studying subjects other than Business. The aim of this study was to evaluate the usage of Facebook as an educational technology tool in entrepreneurship course in TVET institution particularly in Polytechnic Malaysia. The 400 sample was ...

Effective deployment of technology-supported management of chronic respiratory conditions: a call for stakeholder engagement.

Science.gov (United States)

Costello, Richard W; Dima, Alexandra L; Ryan, Dermot; McIvor, R Andrew; Boycott, Kay; Chisholm, Alison; Price, David; Blakey, John D

2017-01-01

Healthcare systems are under increasing strain, predominantly due to chronic non-communicable diseases. Connected healthcare technologies are becoming ever more capable and their components cheaper. These innovations could facilitate both self-management and more efficient use of healthcare resources for common respiratory diseases such as asthma and chronic obstructive pulmonary disease. However, newer technologies can only facilitate major changes in practice, and cannot accomplish them in isolation. There are now large numbers of devices and software offerings available. However, the potential of such technologies is not being realised due to limited engagement with the public, clinicians and providers, and a relative paucity of evidence describing elements of best practice in this complex and evolving environment. Indeed, there are clear examples of wasted resources and potential harm. We therefore call on interested parties to work collaboratively to begin to realize the potential benefits and reduce the risks of connected technologies through change in practice. We highlight key areas where such partnership can facilitate the effective and safe use of technology in chronic respiratory care: developing data standards and fostering inter-operability, making collaborative testing facilities available at scale for small to medium enterprises, developing and promoting new adaptive trial designs, developing robust health economic models, agreeing expedited approval pathways, and detailed planning of dissemination to use. The increasing capability and availability of connected technologies in respiratory care offers great opportunities and significant risks. A co-ordinated collaborative approach is needed to realize these benefits at scale. Using newer technologies to revolutionize practice relies on widespread engagement and cannot be delivered by a minority of interested specialists. Failure to engage risks a costly and inefficient chapter in respiratory care.

Orion: a web-based application designed to monitor resident and fellow performance on-call.

Science.gov (United States)

Itri, Jason N; Kim, Woojin; Scanlon, Mary H

2011-10-01

Radiology residency and fellowship training provides a unique opportunity to evaluate trainee performance and determine the impact of various educational interventions. We have developed a simple software application (Orion) using open-source tools to facilitate the identification and monitoring of resident and fellow discrepancies in on-call preliminary reports. Over a 6-month period, 19,200 on-call studies were interpreted by 20 radiology residents, and 13,953 on-call studies were interpreted by 25 board-certified radiology fellows representing eight subspecialties. Using standard review macros during faculty interpretation, each of these reports was classified as "agreement", "minor discrepancy", and "major discrepancy" based on the potential to impact patient management or outcome. Major discrepancy rates were used to establish benchmarks for resident and fellow performance by year of training, modality, and subspecialty, and to identify residents and fellows demonstrating a significantly higher major discrepancy rate compared with their classmates. Trends in discrepancies were used to identify subspecialty-specific areas of increased major discrepancy rates in an effort to tailor the didactic and case-based curriculum. A series of missed-case conferences were developed based on trends in discrepancies, and the impact of these conferences is currently being evaluated. Orion is a powerful information technology tool that can be used by residency program directors, fellowship programs directors, residents, and fellows to improve radiology education and training.

Technology use as a support tool by secondary students with autism.

Science.gov (United States)

Hedges, Susan H; Odom, Samuel L; Hume, Kara; Sam, Ann

2018-01-01

The purpose of this study was to examine how secondary students with autism spectrum disorder use technology in supportive ways. In this self-report survey study, 472 adolescents with autism spectrum disorder enrolled in high school described the forms of technology they use and purposes for which they use it. Students reported the benefits as well as barriers to technology use at school. They reported using technology in school and home settings in a variety of supportive ways such as increasing their independence, reducing their anxiety, and increasing their social opportunities. Findings suggest that practitioners may benefit from learning how to integrate technology as an instructional and support tool for their students with autism spectrum disorder. Recommendations for future research are provided.

A Meta-Analysis Method to Advance Design of Technology-Based Learning Tool: Combining Qualitative and Quantitative Research to Understand Learning in Relation to Different Technology Features

Science.gov (United States)

Zhang, Lin

2014-01-01

Educators design and create various technology tools to scaffold students' learning. As more and more technology designs are incorporated into learning, growing attention has been paid to the study of technology-based learning tool. This paper discusses the emerging issues, such as how can learning effectiveness be understood in relation to…

Generic Modeling of a Life Support System for Process Technology Comparison

Science.gov (United States)

Ferrall, J. F.; Seshan, P. K.; Rohatgi, N. K.; Ganapathi, G. B.

1993-01-01

This paper describes a simulation model called the Life Support Systems Analysis Simulation Tool (LiSSA-ST), the spreadsheet program called the Life Support Systems Analysis Trade Tool (LiSSA-TT), and the Generic Modular Flow Schematic (GMFS) modeling technique. Results of using the LiSSA-ST and the LiSSA-TT will be presented for comparing life support system and process technology options for a Lunar Base with a crew size of 4 and mission lengths of 90 and 600 days. System configurations to minimize the life support system weight and power are explored.

Integrating New Technologies and Existing Tools to Promote Programming Learning

Directory of Open Access Journals (Sweden)

Álvaro Santos

2010-04-01

Full Text Available In recent years, many tools have been proposed to reduce programming learning difficulties felt by many students. Our group has contributed to this effort through the development of several tools, such as VIP, SICAS, OOP-Anim, SICAS-COL and H-SICAS. Even though we had some positive results, the utilization of these tools doesn’t seem to significantly reduce weaker student’s difficulties. These students need stronger support to motivate them to get engaged in learning activities, inside and outside classroom. Nowadays, many technologies are available to create contexts that may help to accomplish this goal. We consider that a promising path goes through the integration of solutions. In this paper we analyze the features, strengths and weaknesses of the tools developed by our group. Based on these considerations we present a new environment, integrating different types of pedagogical approaches, resources, tools and technologies for programming learning support. With this environment, currently under development, it will be possible to review contents and lessons, based on video and screen captures. The support for collaborative tasks is another key point to improve and stimulate different models of teamwork. The platform will also allow the creation of various alternative models (learning objects for the same subject, enabling personalized learning paths adapted to each student knowledge level, needs and preferential learning styles. The learning sequences will work as a study organizer, following a suitable taxonomy, according to student’s cognitive skills. Although the main goal of this environment is to support students with more difficulties, it will provide a set of resources supporting the learning of more advanced topics. Software engineering techniques and representations, object orientation and event programming are features that will be available in order to promote the learning progress of students.

Technologies in support of CANDU development

International Nuclear Information System (INIS)

Turner, C.; Tapping, B.

2005-01-01

Atomic Energy of Canada, Ltd. (AECL) has significant research and development (R and D) programs designed to meet the needs of both existing CANDU reactors and new and evolving CANDU plant designs. These R and D programs cover a wide range of technology, from chemistry and materials support through to inspection and life management tools. Emphasis is placed on effective technology development programs for fuel channels, feeders and steam generators to ensure their operation through design life, and beyond. This paper specifically addresses how the R and D has been applied in the production of longer-lived pressure tubes for the most recent CANDU 6 reactors, and how this technology forms the basis for the pressure tubes of the Advanced CANDU Reactor (ACR). Similarly, AECL has developed solutions for other critical components such as calandria tubes, feeder pipe and steam generators. The paper also discusses how the R and D knowledge has been integrated into aging management databases and health monitoring tools. Since 1997, AECL has been working with CANDU utilities on comprehensive and integrated CANDU Plant Life Management (PLiM) programs for successful and reliable plant operation through design life and beyond. AECL has developed and implemented an advanced chemistry monitoring and diagnostic system, called ChemAND which allows on-line access by the operators to current and past chemistry conditions enabling appropriate responses and facilitating planning of shutdown maintenance actions. An equivalent tool for monitoring, trending and diagnosing thermal and mechanical data has also been developed; this tool is called ThermAND. AECL is developing the Maintenance Information, Monitoring, and Control (MIMC) system, which provide information to the user for condition-based decision-making in maintenance. To enable more effective inspections, surveillance and data collection, AECL has developed unique one-off tooling to carry out unanticipated inspection and repair

Research and technology management in the electricity industry methods, tools and case studies

CERN Document Server

Daim, Tugrul; Kim, Jisun

2013-01-01

Technologies such as renewable energy alternatives including wind, solar and biomass, storage technologies and electric engines are creating a different landscape for the  electricity industry. Using sources and ideas from technologies such as renewable energy alternatives, Research and Technology Management in the Electricity Industry explores a different landscape for this industry and applies it to the electric industry supported by real industry cases. Divided into three sections, Research and Technology Management in the Electricity Industry introduces a range of  methods and tools includ

A group decision-making tool for the application of membrane technologies in different water reuse scenarios.

Science.gov (United States)

Sadr, S M K; Saroj, D P; Kouchaki, S; Ilemobade, A A; Ouki, S K

2015-06-01

A global challenge of increasing concern is diminishing fresh water resources. A growing practice in many communities to supplement diminishing fresh water availability has been the reuse of water. Novel methods of treating polluted waters, such as membrane assisted technologies, have recently been developed and successfully implemented in many places. Given the diversity of membrane assisted technologies available, the current challenge is how to select a reliable alternative among numerous technologies for appropriate water reuse. In this research, a fuzzy logic based multi-criteria, group decision making tool has been developed. This tool has been employed in the selection of appropriate membrane treatment technologies for several non-potable and potable reuse scenarios. Robust criteria, covering technical, environmental, economic and socio-cultural aspects, were selected, while 10 different membrane assisted technologies were assessed in the tool. The results show this approach capable of facilitating systematic and rigorous analysis in the comparison and selection of membrane assisted technologies for advanced wastewater treatment and reuse. Copyright © 2015 Elsevier Ltd. All rights reserved.

An Overview of Information Technology Tools Implementation in Supply Chain Management

OpenAIRE

Mahadi Hasan Miraz; Md. Mamun Habib; Mohammad Shahansha Molla

2016-01-01

Information Technology (IT) and its usage in administrations and across the supply chain has develop a factor of competitive benefit for numerous companies. This paper focuses the practice of IT tools for Supply Chain Management (SCM) [10]. It also highlights the impact of IT in helping to rearrange the whole delivery set up to accomplish advanced service levels and lower inventory and lower supply chain charges [10]. An overview and perceptible benefits of the present IT tools that are exten...

E-infocenter, a visual tool for project management in educational robotics using web technologies

Directory of Open Access Journals (Sweden)

Kathia Pittí Patiño

2012-07-01

Full Text Available Normal.dotm 0 0 1 147 838 Universidad de Salamanca 6 1 1029 12.0 0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Internet applications and educational robotics are technologies that are characterized by their relatively novelty and motivating character. They are the ideal setting for the application of active teaching methods. The project-based learning is considered as one of the most attractive of these teaching methods. Under our approach, the projects with robots makes use of the Web 2.0 collaborative environment, so this one will be considered as student support tool. In this way they can develop many skills that are easily transferable to the work-market. In this paper, an online visual tool called E-infocenter is described. We will show the developed selection process, the design and the implementation of the mentioned project management. This tool has been used for the first time for six weeks in the workshop “Vehicles LEGO NXT” that is, an experience dedicated to children aged between 8 and 15 years. The benefits perceived by the participants have been at management level, emotional and collaboration.

A nested virtualization tool for information technology practical education.

Science.gov (United States)

Pérez, Carlos; Orduña, Juan M; Soriano, Francisco R

2016-01-01

A common problem of some information technology courses is the difficulty of providing practical exercises. Although different approaches have been followed to solve this problem, it is still an open issue, specially in security and computer network courses. This paper proposes NETinVM, a tool based on nested virtualization that includes a fully functional lab, comprising several computers and networks, in a single virtual machine. It also analyzes and evaluates how it has been used in different teaching environments. The results show that this tool makes it possible to perform demos, labs and practical exercises, greatly appreciated by the students, that would otherwise be unfeasible. Also, its portability allows to reproduce classroom activities, as well as the students' autonomous work.

CALL to Arms: Generations Clash over Digital Technology in the Foreign Language Classroom

Directory of Open Access Journals (Sweden)

Sandor Danka

2017-08-01

Full Text Available Is a smart phone a toy or a tool? Students can’t get enough of it – after all, social media notifications and viral videos do take time to reflect on – while teachers, quite understandably, are dismayed to see an excellent educational tool used purely for entertainment. This paper posits that these two concepts are not mutually exclusive. It proposes a possible common ground, ‘edutainment,’ the integration of interactive mobile technology with the classroom for new opportunities to effectively achieve learning objectives in a light-hearted spirit. This research study describes the attitudes and intentions of 121 Thai English as a Foreign Language (EFL university students towards a playful, competitive smart phone application, its ease of use and perceived benefits to learning. Results of a cross-sectional examination through a paper-based, 4-page questionnaire seem to indicate general acceptance, widespread use and an altogether positive attitude to the software. The paper concludes by highlighting student impressions of its relevance to their studies and offering recommendations for further integration of digital teach-nology into foreign language classrooms.

Nanopore sequencing technology and tools for genome assembly: computational analysis of the current state, bottlenecks and future directions.

Science.gov (United States)

Senol Cali, Damla; Kim, Jeremie S; Ghose, Saugata; Alkan, Can; Mutlu, Onur

2018-04-02

Nanopore sequencing technology has the potential to render other sequencing technologies obsolete with its ability to generate long reads and provide portability. However, high error rates of the technology pose a challenge while generating accurate genome assemblies. The tools used for nanopore sequence analysis are of critical importance, as they should overcome the high error rates of the technology. Our goal in this work is to comprehensively analyze current publicly available tools for nanopore sequence analysis to understand their advantages, disadvantages and performance bottlenecks. It is important to understand where the current tools do not perform well to develop better tools. To this end, we (1) analyze the multiple steps and the associated tools in the genome assembly pipeline using nanopore sequence data, and (2) provide guidelines for determining the appropriate tools for each step. Based on our analyses, we make four key observations: (1) the choice of the tool for basecalling plays a critical role in overcoming the high error rates of nanopore sequencing technology. (2) Read-to-read overlap finding tools, GraphMap and Minimap, perform similarly in terms of accuracy. However, Minimap has a lower memory usage, and it is faster than GraphMap. (3) There is a trade-off between accuracy and performance when deciding on the appropriate tool for the assembly step. The fast but less accurate assembler Miniasm can be used for quick initial assembly, and further polishing can be applied on top of it to increase the accuracy, which leads to faster overall assembly. (4) The state-of-the-art polishing tool, Racon, generates high-quality consensus sequences while providing a significant speedup over another polishing tool, Nanopolish. We analyze various combinations of different tools and expose the trade-offs between accuracy, performance, memory usage and scalability. We conclude that our observations can guide researchers and practitioners in making conscious

Technology and Information Tool Preferences of Academics in the Field of Anaesthesiology.

Science.gov (United States)

Akkaya, Akcan; Bilgi, Murat; Demirhan, Abdullah; Kurt, Adem Deniz; Tekelioğlu, Ümit Yaşar; Akkaya, Kadir; Koçoğlu, Hasan; Tekçe, Hikmet

2014-12-01

Researchers use a large number of information technology tools from the beginning until the publication of a scientific study. The aim of the study is to investigate the technology and data processing tool usage preferences of academics who produce scientific publications in the field of anaesthesiology. A multiple-choice survey, including 18 questions regarding the use of technology to assess the preferences of academicians, was performed. PubMed has been the most preferred article search portal, and the second is Google Academic. Medscape has become the most preferred medical innovation tracking website. Only 12% of academicians obtain a clinical trial registration number for their randomized clinical research. In total, 28% of respondents used the Consolidated Standards of Reporting Trials checklist in their clinical trials. Of all participants, 21% was using Dropbox and 9% was using Google-Drive for sharing files. Google Chrome was the most preferred internet browser (32.25%) for academic purposes. English language editing service was obtained from the Scribendi (21%) and Textcheck (12%) websites. Half of the academics were getting help from their specialist with a personal relationship, 27% was doing it themselves, and 24% was obtaining professional assistance for statistical requirements. Sixty percent of the participants were not using a reference editing program, and 21% was using EndNote. Nine percent of the academics were spending money for article writing, and the mean cost was 1287 Turkish Liras/year. Academics in the field of anaesthesiology significantly benefit from technology and informatics tools to produce scientific publications.

Influence of printing speed on production of embossing tools using FDM 3D printing technology

Directory of Open Access Journals (Sweden)

Jelena Žarko

2017-06-01

Full Text Available Manufacturing of the embossing tools customary implies use of metals such as zinc, magnesium, copper, and brass. In the case of short run lengths, a conventional manufacturing process and the material itself represent a significant cost, not only in the terms of material costs and the need for using complex technological systems which are necessary for their production, but also in the terms of the production time. Alternatively, 3D printing can be used for manufacturing similar embossing tools with major savings in production time and costs. However, due to properties of materials used in the 3D printing technology, expected results of embossing by 3D printed tools cannot be identical to metal ones. This problem is emphasized in the case of long run lengths and high accuracy requirement for embossed elements. The objective of this paper is primarily focused on investigating the influence of the printing speed on reproduction quality of the embossing tools printed with FDM (Fused Deposition Modelling technology. The obtained results confirmed that printing speed as a process parameter affects the reproduction quality of the embossing tools printed with FDM technology: in the case of deposition rate of 90 mm/s was noted the poorest dimensional accuracy in relation to the 3D model, which is more emphasised in case of circular and square elements. Elements printed with the highest printing speed have a greater dimensional accuracy, but with evident cracks on the surface.

Morphometric Assessment of Convergent Tool Technology and Function during the Early Middle Palaeolithic: The Case of Payre, France.

Science.gov (United States)

Chacón, M Gema; Détroit, Florent; Coudenneau, Aude; Moncel, Marie-Hélène

2016-01-01

There appears to be little doubt as to the existence of an intentional technological resolve to produce convergent tools during the Middle Palaeolithic. However, the use of these pieces as pointed tools is still subject to debate: i.e., handheld tool vs. hafted tool. Present-day technological analysis has begun to apply new methodologies in order to quantify shape variability and to decipher the role of the morphology of these pieces in relation to function; for instance, geometric morphometric analyses have recently been applied with successful results. This paper presents a study of this type of analysis on 37 convergent tools from level Ga of Payre site (France), dated to MIS 8-7. These pieces are non-standardized knapping products produced by discoidal and orthogonal core technologies. Moreover, macro-wear studies attest to various activities on diverse materials with no evidence of hafting or projectile use. The aim of this paper is to test the geometric morphometric approach on non-standardized artefacts applying the Elliptical Fourier analysis (EFA) to 3D contours and to assess the potential relationship between size and shape, technology and function. This study is innovative in that it is the first time that this method, considered to be a valuable complement for describing technological and functional attributes, is applied to 3D contours of lithic products. Our results show that this methodology ensures a very good degree of accuracy in describing shape variations of the sharp edges of technologically non-standardized convergent tools. EFA on 3D contours indicates variations in deviations of the outline along the third dimension (i.e., dorso-ventrally) and yields quantitative and insightful information on the actual shape variations of tools. Several statistically significant relationships are found between shape variation and use-wear attributes, though the results emphasize the large variability of the shape of the convergent tools, which, in general

Morphometric Assessment of Convergent Tool Technology and Function during the Early Middle Palaeolithic: The Case of Payre, France.

Directory of Open Access Journals (Sweden)

M Gema Chacón

Full Text Available There appears to be little doubt as to the existence of an intentional technological resolve to produce convergent tools during the Middle Palaeolithic. However, the use of these pieces as pointed tools is still subject to debate: i.e., handheld tool vs. hafted tool. Present-day technological analysis has begun to apply new methodologies in order to quantify shape variability and to decipher the role of the morphology of these pieces in relation to function; for instance, geometric morphometric analyses have recently been applied with successful results. This paper presents a study of this type of analysis on 37 convergent tools from level Ga of Payre site (France, dated to MIS 8-7. These pieces are non-standardized knapping products produced by discoidal and orthogonal core technologies. Moreover, macro-wear studies attest to various activities on diverse materials with no evidence of hafting or projectile use. The aim of this paper is to test the geometric morphometric approach on non-standardized artefacts applying the Elliptical Fourier analysis (EFA to 3D contours and to assess the potential relationship between size and shape, technology and function. This study is innovative in that it is the first time that this method, considered to be a valuable complement for describing technological and functional attributes, is applied to 3D contours of lithic products. Our results show that this methodology ensures a very good degree of accuracy in describing shape variations of the sharp edges of technologically non-standardized convergent tools. EFA on 3D contours indicates variations in deviations of the outline along the third dimension (i.e., dorso-ventrally and yields quantitative and insightful information on the actual shape variations of tools. Several statistically significant relationships are found between shape variation and use-wear attributes, though the results emphasize the large variability of the shape of the convergent tools

Tools and methodologies for evaluation of energy chains and for technology perspective

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

of bio-fuel options (S. His / S. Rozakis); LCA/Evolution and potentialities (M. Sagisaka); The consumer valuation of energy technologies attributes (D. Bjornstad); Perspectives for evaluation of changing behaviour (J.L. Madre); Incentive systems and barriers to social acceptability (J.C. Hourcade); Internalization of external costs (A. Ricci); ETP/Energy technology perspectives project (D. Gielen); ETSAP/Technology dynamics in partial equilibrium energy models (G.C. Tosato); Endogenous technical change in long-term energy models (P. Criqui); Very long-term energy environment modelling (B. Chateau); Ultra long-term energy technology perspectives (M. Akai); The socio-economic toolbox of the EU Hydrogen Road-map (U. Buenger/H. Jeeninga); Combined approach using technology-oriented optimization and evaluation of impacts of individual policy measures (H.J. Ziesing); Application of a suite of basic research portfolio management tools (B. Valdez); Conclusions (R. Leban)

Tools and methodologies for evaluation of energy chains and for technology perspective

International Nuclear Information System (INIS)

2005-01-01

bio-fuel options (S. His / S. Rozakis); LCA/Evolution and potentialities (M. Sagisaka); The consumer valuation of energy technologies attributes (D. Bjornstad); Perspectives for evaluation of changing behaviour (J.L. Madre); Incentive systems and barriers to social acceptability (J.C. Hourcade); Internalization of external costs (A. Ricci); ETP/Energy technology perspectives project (D. Gielen); ETSAP/Technology dynamics in partial equilibrium energy models (G.C. Tosato); Endogenous technical change in long-term energy models (P. Criqui); Very long-term energy environment modelling (B. Chateau); Ultra long-term energy technology perspectives (M. Akai); The socio-economic toolbox of the EU Hydrogen Road-map (U. Buenger/H. Jeeninga); Combined approach using technology-oriented optimization and evaluation of impacts of individual policy measures (H.J. Ziesing); Application of a suite of basic research portfolio management tools (B. Valdez); Conclusions (R. Leban)

PADLET AND OTHER INFORMATION COMMUNICATION TECHNOLOGY TOOLS IN ENGLISH LANGUAGE TEACHING

Directory of Open Access Journals (Sweden)

Tatiana Borisovna Lysunets

2015-12-01

Full Text Available The paper considers the necessity of the computerization of the education sphere. Information Communication Technology (ICT tools and services of Google, blended learning techniques help to enhance autonomous education and answer the training needs of future specia-lists. The paper describes the Padlet (Google application and provides with its practical usage in language classroom. The authors come to the following conclusions: improving Internet and computer technology competence through mastering various Internet tools and applications can be traced. Besides, the introduction of IT into traditional classroom intensifies the process of cognitive development and mental activities, forming the high level of students’ motivation and interest. For students the usage of IT proves the positive dynamics of their accomplishments in the field of selecting, organizing and dealing with information provided in various forms. It enhances students’ opportunities in creating, designing and performing their works and achievements.

The Health Information Technology Competencies Tool: Does It Translate for Nursing Informatics in the United States?

Science.gov (United States)

Sipes, Carolyn; Hunter, Kathleen; McGonigle, Dee; West, Karen; Hill, Taryn; Hebda, Toni

2017-12-01

Information technology use in healthcare delivery mandates a prepared workforce. The initial Health Information Technology Competencies tool resulted from a 2-year transatlantic effort by experts from the US and European Union to identify approaches to develop skills and knowledge needed by healthcare workers. It was determined that competencies must be identified before strategies are established, resulting in a searchable database of more than 1000 competencies representing five domains, five skill levels, and more than 250 roles. Health Information Technology Competencies is available at no cost and supports role- or competency-based queries. Health Information Technology Competencies developers suggest its use for curriculum planning, job descriptions, and professional development.The Chamberlain College of Nursing informatics research team examined Health Information Technology Competencies for its possible application to our research and our curricular development, comparing it originally with the TIGER-based Assessment of Nursing Informatics Competencies and Nursing Informatics Competency Assessment of Level 3 and Level 4 tools, which examine informatics competencies at four levels of nursing practice. Additional analysis involved the 2015 Nursing Informatics: Scope and Standards of Practice. Informatics is a Health Information Technology Competencies domain, so clear delineation of nursing-informatics competencies was expected. Researchers found TIGER-based Assessment of Nursing Informatics Competencies and Nursing Informatics Competency Assessment of Level 3 and Level 4 differed from Health Information Technology Competencies 2016 in focus, definitions, ascribed competencies, and defined levels of expertise. When Health Information Technology Competencies 2017 was compared against the nursing informatics scope and standards, researchers found an increase in the number of informatics competencies but not to a significant degree. This is not surprising

Call for tender - Areva-Alstom: watershed in wind energy - Technological duel on the open sea

International Nuclear Information System (INIS)

Dupin, L.

2012-01-01

The author comments the answers to a call for tender made by the French government and concerning five offshore wind farm sites (Le Treport, Fecamp, Courseulles sur Mer, Saint-Brieuc and Saint-Nazaire). As they are present within the three consortiums, Areva and Alstom should provide the wind turbines. This would result in the construction by Alstom of two blade and mast factories and two turbine and pad factories. For both companies, this market of 500 to 600 turbines is an opportunity. Many jobs are at stake. They push themselves forward for their experience or their innovation capacity. But their wind turbines will be based on foreign (Spanish or German) technology

An Assessment Tool applied to Manure Management Systems using Innovative Technologies

DEFF Research Database (Denmark)

Sørensen, Claus Aage Grøn; Jacobsen, B.H.; Sommer, Sven Gjedde

2003-01-01

of operational and cost-effective animal manure handling technologies. An assessment tool covering the whole chain of the manure handling system from the animal houses to the field has been developed. The tool enables a system-oriented evaluation of labour demand, machinery capacity and costs related......In Denmark, stringent new regulations, placing strict time limits on manure application and setting thresholds for nitrogen utilisation, have been imposed in order to increase the efficiency of uptake of plant nutrients from manure. An important factor in meeting these requirements is the use...

English Digital Dictionaries as Valuable Blended Learning Tools for Palestinian College Students

Science.gov (United States)

Dwaik, Raghad A. A.

2015-01-01

Digital technology has become an indispensable aspect of foreign language learning around the globe especially in the case of college students who are often required to finish extensive reading assignments within a limited time period. Such pressure calls for the use of efficient tools such as digital dictionaries to help them achieve their…

Tools and technologies needed for conducting planetary field geology while on EVA: Insights from the 2010 Desert RATS geologist crewmembers

Science.gov (United States)

Young, Kelsey; Hurtado, José M.; Bleacher, Jacob E.; Brent Garry, W.; Bleisath, Scott; Buffington, Jesse; Rice, James W.

2013-10-01

The tools used by crews while on extravehicular activity during future missions to other bodies in the Solar System will be a combination of traditional geologic field tools (e.g. hammers, rakes, sample bags) and state-of-the-art technologies (e.g. high definition cameras, digital situational awareness devices, and new geologic tools). In the 2010 Desert Research and Technology Studies (RATS) field test, four crews, each consisting of an astronaut/engineer and field geologist, tested and evaluated various technologies during two weeks of simulated spacewalks in the San Francisco volcanic field, Arizona. These tools consisted of both Apollo-style field geology tools and modern technological equipment not used during the six Apollo lunar landings. The underlying exploration driver for this field test was to establish the protocols and technology needed for an eventual manned mission to an asteroid, the Moon, or Mars. The authors of this paper represent Desert RATS geologist crewmembers as well as two engineers who worked on technology development. Here we present an evaluation and assessment of these tools and technologies based on our first-hand experience of using them during the analog field test. We intend this to serve as a basis for continued development of technologies and protocols used for conducting planetary field geology as the Solar System exploration community moves forward into the next generation of planetary surface exploration.

Acceptance factors for the use of video call via smartphone by blind people

Directory of Open Access Journals (Sweden)

Tamanit Chanjaraspong

2017-01-01

Full Text Available Using video call via smartphones is a new technology for blind people which can be applied to facilitate their daily lives. This video call technology is different from old technology and the technology acceptance has changed users' behavior in society, culture, and especially attitude toward using new technology. This research studied the intention and the need to use video call via smartphone by blind people according to the Technology Acceptance Model, a famous and widely-accepted theory for the indication of the intention to use technology. The survey data collected from a sample of 30 blind people who lived in the Bangkok Metropolitan Region and used smartphones in their daily life were analyzed using Pearson's Correlation Coefficient. The results found the perceived ease of use factor and the perceived usefulness factor have similar direction and relation. These two factors also have similar roles and relation to the attitude toward using and behavioral intention to use video call via smartphone in the daily life of blind people. The group of blind people who had not experienced using video call via smartphone had similar direction and relation in technology acceptance at a higher level than the group of blind people who had experienced except for the relation between the attitude toward using factor and the behavioral intention to use factor.

ASR performance analysis of an experimental call routing system

CSIR Research Space (South Africa)

Modipa, T

2009-11-01

Full Text Available Call routing is an important application of Automatic Speech Recognition (ASR) technology. In this paper the authors discuss the main issues affecting the performance of a call routing system and describe the ASR component of the "Auto...

A non-disruptive technology for robust 3D tool tracking for ultrasound-guided interventions.

Science.gov (United States)

Mung, Jay; Vignon, Francois; Jain, Ameet

2011-01-01

In the past decade ultrasound (US) has become the preferred modality for a number of interventional procedures, offering excellent soft tissue visualization. The main limitation however is limited visualization of surgical tools. A new method is proposed for robust 3D tracking and US image enhancement of surgical tools under US guidance. Small US sensors are mounted on existing surgical tools. As the imager emits acoustic energy, the electrical signal from the sensor is analyzed to reconstruct its 3D coordinates. These coordinates can then be used for 3D surgical navigation, similar to current day tracking systems. A system with real-time 3D tool tracking and image enhancement was implemented on a commercial ultrasound scanner and 3D probe. Extensive water tank experiments with a tracked 0.2mm sensor show robust performance in a wide range of imaging conditions and tool position/orientations. The 3D tracking accuracy was 0.36 +/- 0.16mm throughout the imaging volume of 55 degrees x 27 degrees x 150mm. Additionally, the tool was successfully tracked inside a beating heart phantom. This paper proposes an image enhancement and tool tracking technology with sub-mm accuracy for US-guided interventions. The technology is non-disruptive, both in terms of existing clinical workflow and commercial considerations, showing promise for large scale clinical impact.

Using tools and technology to promote education and adherence to oral agents for cancer.

Science.gov (United States)

Burhenn, Peggy S; Smudde, Josephine

2015-06-01

The use of oral agents for cancer (OACs) is increasing, and oncology nurses are in an ideal position to educate patients about them and suggest methods to improve adherence. Once an OAC is ordered, the administration is the responsibility of the patient. Oncology nurses can use tools and technology to assist with education, which may promote adherence, and suggest reminder tools that can be used. Many electronic tools have been developed, such as smartphone applications, text messaging, electronic alarms, and glowing pill bottles. The researchers reviewed electronic devices, as well as traditional methods such as calendars and pillboxes, that can assist patients in remembering to take the medication they are administering at home. A literature search was compiled and websites were searched for patient education tools, reminder tools (electronic and manual), and smartphone applications. The project was part of the Oncology Nursing Society Putting Evidence Into Practice effort on oral adherence. Education alone is insufficient to promote adherence to oral medication regimens. Multicomponent interventions have demonstrated improved adherence, and tools and technology directed at improving adherence to oral agents can be used. The researchers found multiple reminder aids to assist patients in adhering to an oral regimen. They are highlighted in this article.

Surviving the present: Modeling tools for organizational change

International Nuclear Information System (INIS)

Pangaro, P.

1992-01-01

The nuclear industry, like the rest of modern American business, is beset by a confluence of economic, technological, competitive, regulatory, and political pressures. For better or worse, business schools and management consultants have leapt to the rescue, offering the most modern conveniences that they can purvey. Recent advances in the study of organizations have led to new tools for their analysis, revision, and repair. There are two complementary tools that do not impose values or injunctions in themselves. One, called the organization modeler, captures the hierarchy of purposes that organizations and their subparts carry out. Any deficiency or pathology is quickly illuminated, and requirements for repair are made clear. The second, called THOUGHTSTICKER, is used to capture the semantic content of the conversations that occur across the interactions of parts of an organization. The distinctions and vocabulary in the language of an organization, and the relations within that domain, are elicited from the participants so that all three are available for debate and refinement. The product of the applications of these modeling tools is not the resulting models but rather the enhancement of the organization as a consequence of the process of constructing them

Technology development for high temperature logging tools

Energy Technology Data Exchange (ETDEWEB)

Veneruso, A.F.; Coquat, J.A.

1979-01-01

A set of prototype, high temperature logging tools (temperature, pressure and flow) were tested successfully to temperatures up to 275/sup 0/C in a Union geothermal well during November 1978 as part of the Geothermal Logging Instrumentation Development Program. This program is being conducted by Sandia Laboratories for the Department of Energy's Division of Geothermal Energy. The progress and plans of this industry based program to develop and apply the high temperature instrumentation technology needed to make reliable geothermal borehole measurements are described. Specifically, this program is upgrading existing sondes for improved high temperature performance, as well as applying new materials (elastomers, polymers, metals and ceramics) and developing component technology such as high temperature cables, cableheads and electronics to make borehole measurements such as formation temperature, flow rate, high resolution pressure and fracture mapping. In order to satisfy critical existing needs, the near term goal is for operation up to 275/sup 0/C and 7000 psi by the end of FY80. The long term goal is for operation up to 350/sup 0/C and 20,000 psi by the end of FY84.

Call Forecasting for Inbound Call Center

Directory of Open Access Journals (Sweden)

Peter Vinje

2009-01-01

Full Text Available In a scenario of inbound call center customer service, the ability to forecast calls is a key element and advantage. By forecasting the correct number of calls a company can predict staffing needs, meet service level requirements, improve customer satisfaction, and benefit from many other optimizations. This project will show how elementary statistics can be used to predict calls for a specific company, forecast the rate at which calls are increasing/decreasing, and determine if the calls may stop at some point.

Reading comprehension as an alternative tool for teaching science and nuclear technology

International Nuclear Information System (INIS)

Martin, H. R.

2013-01-01

In recent decades, the vast amount of information originated in the production of knowledge and its applications, has highlighted the importance of being independent readers, critics, and able to interpret written material circulating referred to scientific and technological issues, that invade the people's daily life. Moreover, in the last stage of education system of all future citizens of the country, the results of many diagnoses have highlighted the difficulties of young students to understand the texts related to science and technology. However, simultaneously with these weaknesses, students permanently express the need to relate science and technology to everyday life, and are interested in the discussion of the news related to atomic energy spread by the mass media. This duality lack of interest in reading vs interest in knowledge in certain subjects, is what has been taken into account when proposing this pedagogical approach that simultaneously involves several aspects. From the need to find a trigger for the treatment of a particular issue, to familiarization of students with the vocabulary and methodology of science ill the debate on the characteristics of specific technological applications of nuclear technology. Considering particularly the last of these factors, since 2011 has been developed in Jose Maria Paz School of Cordoba, Reading Comprehension Experience, using texts with scientific and technological contents published by Institute for Energy and Development (IEDS) of the National Atomic Energy Commission (CNEA) in Knowledge Leaves Series, as a methodological tool, to bring students to the physics of the atom and matter. The reading strategy used is based on the hypothesis of the type of questions being asked about the contents, can help students to develop reading strategies for comprehension and thus contribute positively to his learning. With this proposal it has been observed an increased on student interest in learning natural science

Chemometrics-based process analytical technology (PAT) tools: applications and adaptation in pharmaceutical and biopharmaceutical industries.

Science.gov (United States)

Challa, Shruthi; Potumarthi, Ravichandra

2013-01-01

Process analytical technology (PAT) is used to monitor and control critical process parameters in raw materials and in-process products to maintain the critical quality attributes and build quality into the product. Process analytical technology can be successfully implemented in pharmaceutical and biopharmaceutical industries not only to impart quality into the products but also to prevent out-of-specifications and improve the productivity. PAT implementation eliminates the drawbacks of traditional methods which involves excessive sampling and facilitates rapid testing through direct sampling without any destruction of sample. However, to successfully adapt PAT tools into pharmaceutical and biopharmaceutical environment, thorough understanding of the process is needed along with mathematical and statistical tools to analyze large multidimensional spectral data generated by PAT tools. Chemometrics is a chemical discipline which incorporates both statistical and mathematical methods to obtain and analyze relevant information from PAT spectral tools. Applications of commonly used PAT tools in combination with appropriate chemometric method along with their advantages and working principle are discussed. Finally, systematic application of PAT tools in biopharmaceutical environment to control critical process parameters for achieving product quality is diagrammatically represented.

Advances in software science and technology

CERN Document Server

Kakuda, Hiroyasu; Ohno, Yoshio

1992-01-01

Advances in Software Science and Technology, Volume 3 provides information pertinent to the advancement of the science and technology of computer software. This book discusses the various applications for computer systems.Organized into two parts encompassing 11 chapters, this volume begins with an overview of the development of a system of writing tools called SUIKOU that analyzes a machine-readable Japanese document textually. This text then presents the conditioned attribute grammars (CAGs) and a system for evaluating them that can be applied to natural-language processing. Other chapters c

Tool Integration: Experiences and Issues in Using XMI and Component Technology

DEFF Research Database (Denmark)

Damm, Christian Heide; Hansen, Klaus Marius; Thomsen, Michael

2000-01-01

of conflicting data models, and provide architecture for doing so, based on component technology and XML Metadata Interchange. As an example, we discuss the implementation of an electronic whiteboard tool, Knight, which adds support for creative and collaborative object-oriented modeling to existing Computer-Aided...... Software Engineering through integration using our proposed architecture....

The Internet information infrastructure: Terrorist tool or architecture for information defense?

Energy Technology Data Exchange (ETDEWEB)

Kadner, S.; Turpen, E. [Aquila Technologies Group, Albuquerque, NM (United States); Rees, B. [Los Alamos National Lab., NM (United States)

1998-12-01

The Internet is a culmination of information age technologies and an agent of change. As with any infrastructure, dependency upon the so-called global information infrastructure creates vulnerabilities. Moreover, unlike physical infrastructures, the Internet is a multi-use technology. While information technologies, such as the Internet, can be utilized as a tool of terror, these same technologies can facilitate the implementation of solutions to mitigate the threat. In this vein, this paper analyzes the multifaceted nature of the Internet information infrastructure and argues that policymakers should concentrate on the solutions it provides rather than the vulnerabilities it creates. Minimizing risks and realizing possibilities in the information age will require institutional activities that translate, exploit and convert information technologies into positive solutions. What follows is a discussion of the Internet information infrastructure as it relates to increasing vulnerabilities and positive potential. The following four applications of the Internet will be addressed: as the infrastructure for information competence; as a terrorist tool; as the terrorist`s target; and as an architecture for rapid response.

New AIDA-2020 call for breakthrough detector technologies

CERN Multimedia

2016-01-01

Physicists, engineers, and industry will be interested in a new proof-of-concept fund for breakthrough projects from the general field of detector development and testing.   Launched in the framework of the European project AIDA-2020, this open call will provide up to 200k€ of seed funding to support innovative and societal applications with a focus on industry-oriented applications. The deadline for applying is 20 October 2016. More information here.

MOOCs as a Professional Development Tool for Librarians

Directory of Open Access Journals (Sweden)

Meghan Ecclestone

2013-11-01

Full Text Available This article explores how reference and instructional librarians taking over new areas of subject responsibility can develop professional expertise using new eLearning tools called MOOCs. MOOCs – Massive Open Online Courses – are a new online learning model that offers free higher education courses to anyone with an Internet connection and a keen interest to learn. As MOOCs proliferate, librarians have the opportunity to leverage this technology to improve their professional skills.

Process analytical technology (PAT) tools for the cultivation step in biopharmaceutical production

NARCIS (Netherlands)

Streefland, M.; Martens, D.E.; Beuvery, E.C.; Wijffels, R.H.

2013-01-01

The process analytical technology (PAT) initiative is now 10 years old. This has resulted in the development of many tools and software packages dedicated to PAT application on pharmaceutical processes. However, most applications are restricted to small molecule drugs, mainly for the relatively

Tool Choice for E-Learning: Task-Technology Fit through Media Synchronicity

Science.gov (United States)

Sun, Jun; Wang, Ying

2014-01-01

One major challenge in online education is how to select appropriate e-learning tools for different learning tasks. Based on the premise of Task-Technology Fit Theory, this study suggests that the effectiveness of student learning in online courses depends on the alignment between two. Furthermore, it conceptualizes the formation of such a fit…

How Mockups, a Key Engineering Tool, Help to Promote Science, Technology, Engineering, and Mathematics Education

Science.gov (United States)

McDonald, Harry E.

2010-01-01

The United States ranking among the world in science, technology, engineering, and mathematics (STEM) education is decreasing. To counteract this problem NASA has made it part of its mission to promote STEM education among the nation s youth. Mockups can serve as a great tool when promoting STEM education in America. The Orion Cockpit Working Group has created a new program called Students Shaping America s Next Space Craft (SSANS) to outfit the Medium Fidelity Orion Mockup. SSANS will challenge the students to come up with unique designs to represent the flight design hardware. There are two main types of project packages created by SSANS, those for high school students and those for university students. The high school projects will challenge wood shop, metal shop and pre-engineering classes. The university projects are created mainly for senior design projects and will require the students to perform finite element analysis. These projects will also challenge the undergraduate students in material selection and safety requirements. The SSANS program will help NASA in its mission to promote STEM education, and will help to shape our nations youth into the next generation of STEM leaders.

Manufacturing process applications team (MATEAM). [technology transfer in the areas of machine tools and robots

Science.gov (United States)

1979-01-01

The transfer of NASA technology to the industrial sector is reported. Presentations to the machine tool and robot industries and direct technology transfers of the Adams Manipulator arm, a-c motor control, and the bolt tension monitor are discussed. A listing of proposed RTOP programs with strong potential is included. A detailed description of the rotor technology available to industry is given.

Development of Ethical Bio-Technology Assessment Tools for Agriculture and Food Production

NARCIS (Netherlands)

Beekman, V.

2005-01-01

The objective of this project is to develop and improve tools for the ethical assessment of new technologies in agriculture and food production in general and modern biotechnologies in particular. The project thus responds to the plurality of consumer concerns that increasingly inform the European

Rapid Analysis and Manufacturing Propulsion Technology (RAMPT)

Science.gov (United States)

Fikes, John C.

2018-01-01

NASA's strategic plan calls for the development of enabling technologies, improved production methods, and advanced design and analysis tools related to the agency's objectives to expand human presence in the solar system. NASA seeks to advance exploration, science, innovation, benefits to humanity, and international collaboration, as well as facilitate and utilize U.S. commercial capabilities to deliver cargo and crew to space.

PECULIARITIES OF THE TECHNOLOGY OF CONTINUOUS CASTING OF SLUGS OF MACHINE- AND MACHINE-TOOL-BUILDING

OpenAIRE

E. B. Demchenko; E. I. Marukovich

2006-01-01

The peculiarities of technology of continuous casting of ingots of machine- and machine tool building are shown. At development of technology it is necessary to subject the nomenclature of ingots to analysis in order to reveal expediency of their production by means of continuous casting.

Health Information Technology as a Universal Donor to Bioethics Education.

Science.gov (United States)

Goodman, Kenneth W

2017-04-01

Health information technology, sometimes called biomedical informatics, is the use of computers and networks in the health professions. This technology has become widespread, from electronic health records to decision support tools to patient access through personal health records. These computational and information-based tools have engendered their own ethics literature and now present an opportunity to shape the standard medical and nursing ethics curricula. It is suggested that each of four core components in the professional education of clinicians-privacy, end-of-life care, access to healthcare and valid consent, and clinician-patient communication-offers an opportunity to leverage health information technology for curricular improvement. Using informatics in ethics education freshens ethics pedagogy and increases its utility, and does so without additional demands on overburdened curricula.

A new technology perspective and engineering tools approach for large, complex and distributed mission and safety critical systems components

Science.gov (United States)

Carrio, Miguel A., Jr.

1988-01-01

Rapidly emerging technology and methodologies have out-paced the systems development processes' ability to use them effectively, if at all. At the same time, the tools used to build systems are becoming obsolescent themselves as a consequence of the same technology lag that plagues systems development. The net result is that systems development activities have not been able to take advantage of available technology and have become equally dependent on aging and ineffective computer-aided engineering tools. New methods and tools approaches are essential if the demands of non-stop and Mission and Safety Critical (MASC) components are to be met.

A Contribution to Guide the Use of Support Tools for Technology Roadmapping: a Case Study in the Clothing Industry

Directory of Open Access Journals (Sweden)

Cindy Johanna Ibarra González

2013-12-01

Full Text Available This article presents guidelines regarding the use of tools to support technology roadmapping based on a case study of an exploratory and descriptive nature in a small company in the clothing sector. After introducing a systematic approach to technology roadmapping with their support tools, an empirical analysis is then presented of the application of the tools of the market layer – a questionnaire for consultation with the consumers and bibliographical research – and the business layer – SWOT matrix, through illustrative examples. Each tool was analyzed in relation to the complexity, time, cost of implementation, relevance and quality of the resulting information, the most common problems associated with their use. Here we show that the tools of the market layer proved to be easiest to use when compared with the tools of business layer, varying the time required, but involving, in general, a low cost in its application to obtain relevant and quality results for the development of the roadmap. Based on the results, general guidelines for the use of these tools to assist in the process of technology roadmapping were established as well as a comparison between the tools.

GIS tools, courses, and learning pathways offered by The National Interagency Fuels, Fire, and Vegetation Technology Transfer (NIFTT)

Science.gov (United States)

Heather Heward; Kathy H. Schon

2009-01-01

As technology continues to evolve in the area of fuel and wildland fire management so does the need to have effective tools and training on these technologies. The National Interagency Fuels Coordination Group has chartered a team of professionals to coordinate, develop, and transfer consistent, efficient, science-based fuel and fire ecology assessment GIS tools and...

Touch the Page and Mimic Me: Evaluation of a Talking-Pen Learning Tool

Science.gov (United States)

Odakura, Abigail

2013-01-01

The purpose of this paper is to evaluate the talking-pen device called the Mimic Me, an educational technology product of a large English conversation school in Japan, as an educational learning tool. The product will be reviewed in terms of its developmental appropriateness for the target audience based on current research. Although the Mimic Me…

78 FR 4369 - Rates for Interstate Inmate Calling Services

Science.gov (United States)

2013-01-22

... are the other pros or cons of debit calling? We seek comment on ICS providers' overall experiences... regarding intrastate ICS rates. 51. We also seek comment on how and whether use of VoIP technologies by ICS... utilizing VoIP technology to provide ICS? Would the use of VoIP technology affect the authority of state...

VIPER: a web application for rapid expert review of variant calls.

Science.gov (United States)

Wöste, Marius; Dugas, Martin

2018-01-15

With the rapid development in next-generation sequencing, cost and time requirements for genomic sequencing are decreasing, enabling applications in many areas such as cancer research. Many tools have been developed to analyze genomic variation ranging from single nucleotide variants to whole chromosomal aberrations. As sequencing throughput increases, the number of variants called by such tools also grows. Often employed manual inspection of such calls is thus becoming a time-consuming procedure. We developed the Variant InsPector and Expert Rating tool (VIPER) to speed up this process by integrating the Integrative Genomics Viewer into a web application. Analysts can then quickly iterate through variants, apply filters and make decisions based on the generated images and variant metadata. VIPER was successfully employed in analyses with manual inspection of more than 10,000 calls. VIPER is implemented in Java and Javascript and is freely available at https://github.com/MarWoes/viper. Marius.Woeste@uni-muenster.de. Supplementary data are available at Bioinformatics online. © The Author (2018). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Overcoming Learning Time And Space Constraints Through Technological Tool

Directory of Open Access Journals (Sweden)

Nafiseh Zarei

2015-08-01

Full Text Available Today the use of technological tools has become an evolution in language learning and language acquisition. Many instructors and lecturers believe that integrating Web-based learning tools into language courses allows pupils to become active learners during learning process. This study investigate how the Learning Management Blog (LMB overcomes the learning time and space constraints that contribute to students’ language learning and language acquisition processes. The participants were 30 ESL students at National University of Malaysia. A qualitative approach comprising an open-ended questionnaire and a semi-structured interview was used to collect data. The results of the study revealed that the students’ language learning and acquisition processes were enhanced. The students did not face any learning time and space limitations while being engaged in the learning process via the LMB. They learned and acquired knowledge using the language learning materials and forum at anytime and anywhere. Keywords: learning time, learning space, learning management blog

78 FR 76257 - Rural Call Completion

Science.gov (United States)

2013-12-17

... must be held together with rubber bands or fasteners. Any envelopes must be disposed of before entering... Completion/Call Termination Handbook outlining standards and practices of the industry relevant to ensuring... telecommunications networks. Transmission facilities may be based on a single technology or a combination of...

New technology expected to increase sharpness, reduce prices of scalpels

CERN Multimedia

2002-01-01

Earlier this year, MDW Technologies introduced a new blade sharpening method called Ultra-Quantum. By combining micro machining and high-energy physics, cutting edges can be manufactured with an edge radius as small as one billionth of an inch and should make surgical tools cheaper and more effective (1 paragraph).

Valuation of European Call Option via Inverse Fourier Transform

Directory of Open Access Journals (Sweden)

Rubenis Oskars

2017-12-01

Full Text Available Very few models allow expressing European call option price in closed form. Out of them, the famous Black- Scholes approach sets strong constraints - innovations should be normally distributed and independent. Availability of a corresponding characteristic function of log returns of underlying asset in analytical form allows pricing European call option by application of inverse Fourier transform. Characteristic function corresponds to Normal Inverse Gaussian (NIG probability density function. NIG distribution is obtained based on assumption that time series of log returns follows APARCH process. Thus, volatility clustering and leptokurtic nature of log returns are taken into account. The Fast Fourier transform based on trapezoidal quadrature is numerically unstable if a standard cumulative probability function is used. To solve the problem, a dampened cumulative probability is introduced. As a computation tool Matlab framework is chosen because it contains many effective vectorization tools that greatly enhance code readability and maintenance. The characteristic function of Normal Inverse Gaussian distribution is taken and exercised with the chosen set of parameters. Finally, the call price dependence on strike price is obtained and rendered in XY plot. Valuation of European call option with analytical form of characteristic function allows further developing models with higher accuracy, as well as developing models for some exotic options.

Digital forensic technologies as e-fraud risk mitigation tools in the banking industry: Evidence from Zimbabwe

Directory of Open Access Journals (Sweden)

Shewangu Dzomira

2014-07-01

Full Text Available The paper investigates digital analytical tools and technologies used in electronic fraud prevention and detection, used in the banking industry. The paper is based on a descriptive study which studied digital forensics and cyber fraud phenomenon using content analysis. To obtain the data questionnaires and interviews were administered to the selected informants from 22 banks. Convenience and judgemental sampling techniques were used. It was found out that fraud detection and prevention tools and technologies would be most effective way of combating e-fraud if they can be utilized. It is concluded that banking institutions should reshape their anti-fraud strategies to be effective by considering fraud detection efforts using advanced analytics and related tools, software and application to get more efficient oversight

Incorporating technology-based learning tools into teaching and learning of optimization problems

Science.gov (United States)

Yang, Irene

2014-07-01

The traditional approach of teaching optimization problems in calculus emphasizes more on teaching the students using analytical approach through a series of procedural steps. However, optimization normally involves problem solving in real life problems and most students fail to translate the problems into mathematic models and have difficulties to visualize the concept underlying. As an educator, it is essential to embed technology in suitable content areas to engage students in construction of meaningful learning by creating a technology-based learning environment. This paper presents the applications of technology-based learning tool in designing optimization learning activities with illustrative examples, as well as to address the challenges in the implementation of using technology in teaching and learning optimization. The suggestion activities in this paper allow flexibility for educator to modify their teaching strategy and apply technology to accommodate different level of studies for the topic of optimization. Hence, this provides great potential for a wide range of learners to enhance their understanding of the concept of optimization.

Sharing programming resources between Bio* projects through remote procedure call and native call stack strategies.

Science.gov (United States)

Prins, Pjotr; Goto, Naohisa; Yates, Andrew; Gautier, Laurent; Willis, Scooter; Fields, Christopher; Katayama, Toshiaki

2012-01-01

Open-source software (OSS) encourages computer programmers to reuse software components written by others. In evolutionary bioinformatics, OSS comes in a broad range of programming languages, including C/C++, Perl, Python, Ruby, Java, and R. To avoid writing the same functionality multiple times for different languages, it is possible to share components by bridging computer languages and Bio* projects, such as BioPerl, Biopython, BioRuby, BioJava, and R/Bioconductor. In this chapter, we compare the two principal approaches for sharing software between different programming languages: either by remote procedure call (RPC) or by sharing a local call stack. RPC provides a language-independent protocol over a network interface; examples are RSOAP and Rserve. The local call stack provides a between-language mapping not over the network interface, but directly in computer memory; examples are R bindings, RPy, and languages sharing the Java Virtual Machine stack. This functionality provides strategies for sharing of software between Bio* projects, which can be exploited more often. Here, we present cross-language examples for sequence translation, and measure throughput of the different options. We compare calling into R through native R, RSOAP, Rserve, and RPy interfaces, with the performance of native BioPerl, Biopython, BioJava, and BioRuby implementations, and with call stack bindings to BioJava and the European Molecular Biology Open Software Suite. In general, call stack approaches outperform native Bio* implementations and these, in turn, outperform RPC-based approaches. To test and compare strategies, we provide a downloadable BioNode image with all examples, tools, and libraries included. The BioNode image can be run on VirtualBox-supported operating systems, including Windows, OSX, and Linux.

Information systems performance evaluation, introducing a two-level technique: Case study call centers

Directory of Open Access Journals (Sweden)

Hesham A. Baraka

2015-03-01

The objective of this paper was to introduce a new technique that can support decision makers in the call centers industry to evaluate, and analyze the performance of call centers. The technique presented is derived from the research done on measuring the success or failure of information systems. Two models are mainly adopted namely: the Delone and Mclean model first introduced in 1992 and the Design Reality Gap model introduced by Heeks in 2002. Two indices are defined to calculate the performance of the call center; the success index and the Gap Index. An evaluation tool has been developed to allow call centers managers to evaluate the performance of their call centers in a systematic analytical approach; the tool was applied on 4 call centers from different areas, simple applications such as food ordering, marketing, and sales, technical support systems, to more real time services such as the example of emergency control systems. Results showed the importance of using information systems models to evaluate complex systems as call centers. The models used allow identifying the dimensions for the call centers that are facing challenges, together with an identification of the individual indicators in these dimensions that are causing the poor performance of the call center.

Call Duration Characteristics based on Customers Location

Directory of Open Access Journals (Sweden)

Žvinys Karolis

2014-05-01

Full Text Available Nowadays a lot of different researches are performed based on call duration distributions (CDD analysis. However, the majority of studies are linked with social relationships between the people. Therefore the scarcity of information, how the call duration is associated with a user's location, is appreciable. The goal of this paper is to reveal the ties between user's voice call duration and the location of call. For this reason we analyzed more than 5 million calls from real mobile network, which were made over the base stations located in rural areas, roads, small towns, business and entertainment centers, residential districts. According to these site types CDD’s and characteristic features for call durations are given and discussed. Submitted analysis presents the users habits and behavior as a group (not an individual. The research showed that CDD’s of customers being them in different locations are not equal. It has been found that users at entertainment, business centers are tend to talk much shortly, than people being at home. Even more CDD can be distorted strongly, when machinery calls are evaluated. Hence to apply a common CDD for a whole network it is not recommended. The study also deals with specific parameters of call duration for distinguished user groups, the influence of network technology for call duration is considered.

Information Technology for Agriculture: Using it tools to aid decision-making process in small properties

Directory of Open Access Journals (Sweden)

Caroline de Oliveira Ferraz

2017-07-01

Full Text Available With the current scenario of agricultural competitiveness, the use of Information and Communication Technology (ICT tools has become increasingly common in the rural community, making life easier for farmers. The information obtained through Agroinformatics (Information Technology applied to agribusiness, serves as a basis for both decision-making, planning, and application of the best techniques and production processes. In Brazil, companies such as EMPRAPA (The Brazilian Agricultural Research Corporation work in the research and development of new technological tools, which seek to boost the agricultural production of small rural producers, reducing their costs and improving their results. But for this, it is necessary that the producers understand the concept of the importance in carrying out information collection in a correct way, because the information will be processed according to what is inserted in the systems. In this sense, this article aims to demonstrate through an explanatory research of qualitative nature and bibliographical character the importance of the use of ICT to support decision-making in the Brazilian rural sector. Also highlighting the benefits originated by the use of ICT in all stages of agricultural production and its accounting management, through examples of tools.

Decision support tools for evaluation and selection of technologies for soil remediation and disposal of halogenated waste

Energy Technology Data Exchange (ETDEWEB)

Khelifi, O.; Zinovyev, S.; Lodolo, A.; Vranes, S.; Miertus, S. [ICS-UNIDO, Trieste (Italy)

2004-09-15

One of the most justified demands in abating the pollution created by polychlorinated substances is the remediation of contaminated sites, mainly soil remediation, which is also the most complex technical task in removing pollution because of the necessity to process huge quantities of matrix and to account for numerous side factors. The commercial technologies are usually based on rather direct and simplified but also secure processes, which often approach remediation in a general way, where different types of pollutants can be decontaminated at the same time by each technology. A number of different soil remediation technologies are nowadays available and the continuous competition among environmental service companies and technology developers generates a further increase in the clean-up options. The demand for decision support tools that could help decision makers in selecting the most appropriate technology for the specific contaminated site has consequently increased. These decision support tools (DST) are designed to help decision makers (site owners, local community representatives, environmentalists, regulators, etc.) to assess available technologies and preliminarily select the preferred remedial options. The analysis for the identification of the most suitable options in the DST is based on technical, economic, environmental, and social criteria. These criteria are ranked by all parties involved in the decision process to determine their relative importance for a particular remediation project. The aim of the present paper is to present the new approach for building decision support tool to evaluate different technologies for remediation and disposal of halogenated waste.

The Will, Skill, Tool Model of Technology Integration: Adding Pedagogy as a New Model Construct

Science.gov (United States)

Knezek, Gerald; Christensen, Rhonda

2015-01-01

An expansion of the Will, Skill, Tool Model of Technology Integration to include teacher's pedagogical style is proposed by the authors as a means of advancing the predictive power for level of classroom technology integration to beyond 90%. Suggested advantages to this expansion include more precise identification of areas to be targeted for…

Interactive, technology-enhanced self-regulated learning tools in healthcare education: a literature review.

Science.gov (United States)

Petty, Julia

2013-01-01

Learning technology is increasingly being implemented for programmes of blended learning within nurse education. With a growing emphasis on self-directed study particularly in post-basic education, there is a need for learners to be guided in their learning away from practice and limited classroom time. Technology-enabled (TE) tools which engage learners actively can play a part in this. The effectiveness and value of interactive TE learning strategies within healthcare is the focus of this paper. To identify literature that explores the effectiveness of interactive, TE tools on knowledge acquisition and learner satisfaction within healthcare with a view to evaluating their use for post-basic nurse education. A Literature Review was performed focusing on papers exploring the comparative value and perceived benefit of TE tools compared to traditional modes of learning within healthcare. The Databases identified as most suitable due to their relevance to healthcare were accessed through EBSCOhost. Primary, Boolean and advanced searches on key terms were undertaken. Inclusion and exclusion criteria were applied which resulted in a final selection of 11 studies for critique. Analysis of the literature found that knowledge acquisition in most cases was enhanced and measured learner satisfaction was generally positive for interactive, self-regulated TE tools. However, TE education may not suit all learners and this is critiqued in the light of the identified limitations. Interactive self regulation and/or testing can be a valuable learning strategy that can be incorporated into self-directed programmes of study for post-registration learners. Whilst acknowledging the learning styles not suited to such tools, the concurrent use of self-directed TE tools with those learning strategies necessitating a more social presence can work together to support enhancement of knowledge required to deliver rationale for nursing practice. Copyright © 2012 Elsevier Ltd. All rights

Transcriptomic SNP discovery for custom genotyping arrays: impacts of sequence data, SNP calling method and genotyping technology on the probability of validation success.

Science.gov (United States)

Humble, Emily; Thorne, Michael A S; Forcada, Jaume; Hoffman, Joseph I

2016-08-26

Single nucleotide polymorphism (SNP) discovery is an important goal of many studies. However, the number of 'putative' SNPs discovered from a sequence resource may not provide a reliable indication of the number that will successfully validate with a given genotyping technology. For this it may be necessary to account for factors such as the method used for SNP discovery and the type of sequence data from which it originates, suitability of the SNP flanking sequences for probe design, and genomic context. To explore the relative importance of these and other factors, we used Illumina sequencing to augment an existing Roche 454 transcriptome assembly for the Antarctic fur seal (Arctocephalus gazella). We then mapped the raw Illumina reads to the new hybrid transcriptome using BWA and BOWTIE2 before calling SNPs with GATK. The resulting markers were pooled with two existing sets of SNPs called from the original 454 assembly using NEWBLER and SWAP454. Finally, we explored the extent to which SNPs discovered using these four methods overlapped and predicted the corresponding validation outcomes for both Illumina Infinium iSelect HD and Affymetrix Axiom arrays. Collating markers across all discovery methods resulted in a global list of 34,718 SNPs. However, concordance between the methods was surprisingly poor, with only 51.0 % of SNPs being discovered by more than one method and 13.5 % being called from both the 454 and Illumina datasets. Using a predictive modeling approach, we could also show that SNPs called from the Illumina data were on average more likely to successfully validate, as were SNPs called by more than one method. Above and beyond this pattern, predicted validation outcomes were also consistently better for Affymetrix Axiom arrays. Our results suggest that focusing on SNPs called by more than one method could potentially improve validation outcomes. They also highlight possible differences between alternative genotyping technologies that could be

Pete's Tool: Identity and Sex-Play in the Design and Technology Classroom.

Science.gov (United States)

Dixon, Carolyn

1997-01-01

Explores the "interactional work" of one boy in a technology lesson as he elaborates, through "play" with workshop tools, a sexual fantasy of masturbation and penetration. This action is contextualized by his relations with others and by the dominance of a prevailing myth of male sexuality in his construction of a masculine…

Spare parts management at complex technology-based organizations: an agenda for research

NARCIS (Netherlands)

Rustenburg, W.D.; Houtum, van G.J.J.A.N.; Zijm, W.H.M.

2001-01-01

This paper explores the applicability of sophisticated models and techniques for spare parts inventory management within a highly technology-driven environment, viz. the Royal Netherlands Navy. In particular, we discuss the structure of the so-called VARI-METRIC models, a set of tools that has been

Modern trends in increasing the quality of the steels intended for cutting and metal-working tools: I. Improvement of granule metallurgy processes

Science.gov (United States)

Belyanchikov, L. N.

2008-12-01

The following new technological processes for producing fine gas-atomized powders of tool and high-speed steels with a low content of nonmetallic inclusions are considered: the process designed by Böhler Uddeholm Powder Technology (Austria) and processes involving a heated gas. In the former process, a metal is poured from a ladle with electroslag heating, and the atomizing unit consists of three injectors. A new process of producing tools from fine powders by three-dimensional printing, i.e., so-called 3D-printing, is described.

Technology management-An effective tool to add competitiveness to the business

Energy Technology Data Exchange (ETDEWEB)

Layrisse, I.; Izquierdo, A. [Intevep, S.A., Caracas (Venezuela)

1996-08-01

Petreleos de Venezuela (PDVSA) and its affiliated companies, aware of the importance of the technology to sustain the viability of a successful corporation in global markets with increasing competition and stringent economies, are devoting important efforts in technology as an effective tool to add competitiveness to its core businesses. These efforts are based in the conception of the technology as a structural aspect of the corporation integrated to each one of its businesses. In this sense technology is considered in an integrated way together with markets, operations, infrastructure, resources, etc., across the value chain of the company, from the conception of its vision and mission to the formulation and execution of its operating plans. In this presentation, the conceptual and methodological aspects employed by PDVSA in the establishment of its technology strategy integrated to its business plan, and subsequent project portfolio definition, are summarized. The experience acquired through this corporative exercise conducted by PDVSA confirms that technology and its management are highly linked to the culture of the companies and of the countries where they operate. The technology management best practices are very helpful in establishing processes and specific methodologies; however, the consideration of other aspects such as leadership, management style, shared values, etc., need to be taken into account with the same emphasis, in order to accomplish the changes needed to create a technology culture fitted to a given setting and ideology.

Decision making tools for selecting sustainable wastewater treatment technologies in Thailand

Science.gov (United States)

Wongburi, Praewa; Park, Jae K.

2018-05-01

Wastewater consists of valuable resources that could be recovered or reused. Still it is under threat because of ineffective wastewater management and systems. In Thailand, less than 25% of wastewater generated may be treated while then rest is inadequately treated and sent back directly into waterbodies or the environment. Furthermore, the technologies that have been applied may be inefficient and unsustainable. Efficiency, sustainability, and simplicity are important concepts when designing an appropriate wastewater treatment system in developing countries. The objectives of this study were to review and evaluate wastewater treatment technologies and propose a method to improve or select an appropriate technology. An expert system in Excel® program was developed to determine the best solution. Sensitivity analysis was applied to compare and assess uncertainty factors. Due to the different conditions of each area, the key factor of interest was varied. Furthermore, Robust Decision Making tool was applied to determine the best way to improve existing wastewater treatment facility and to choose the most appropriate wastewater treatment technology.

Performance evaluation of paper embossing tools produced by fused deposition modelling additive manufacturing technology

Directory of Open Access Journals (Sweden)

Gordana Delić

2017-12-01

Full Text Available From its beginnings, up to a few years ago, additive manufacturing technology was able to produce models or prototypes which have limited use, because of materials mechanical properties. With advancement and invention of new materials, this is changing. Now, it is possible to create 3D prints that can be used as final products or functional tools, using technology and materials with low environmental impact. The goal of this study was to examine opportunities for production of paper embossing tools by fused deposition modelling (FDM 3D printing. This study emphasises the use of environmentally friendly poly-lactic acid (PLA materials in FDM technology, contrary to the conventional method using metal alloys and acids. Embossing of line elements and letters using 3D printed embossing tools was done on six different types of paper. Embossing force was applied using SHIMADZU EZ-LX Compact Tabletop Testing Machine. Each type of paper was repeatedly embossed using different values of embossing force (in 250 N increments, starting at 1000 N to determine the optimal embossing force for each specific paper type. When determined, the optimal embossing force was used on ten samples for each paper type. Results of embossing were analysed and evaluated. The analysis consisted of investigating the effects of the applied embossing force and characteristics such as paper basis weight, paper structure, surface characteristic and fibre direction of the paper. Results show that paper characteristics determine the embossing force required for achieving a good embossing result. This means that with the right amount of embossing force, letters and borderlines can be equally well formed by the embossing process regardless of paper weight, surface characteristics, etc. Embossing tools produced in this manner can be used in case of the embossing elements that are not complex. The reason for this is the limitation of FDM technology and lack of precision needed for fine

Handheld Libraries 101: Using Mobile Technologies in the Academic Library

Science.gov (United States)

Kosturski, Kate; Skornia, Frank

2011-01-01

The 2009 "Horizon Report" called mobile technologies "an opportunity for higher education to reach its constituents in new and compelling ways." The report implied that academic libraries would find them to be the ideal tools for bringing reluctant researchers to the library, mainly for their convenience. It's not hard to see why--in 2008, mobile…

5 Myths about Classroom Technology: How Do We Integrate Digital Tools to Truly Enhance Learning?

Science.gov (United States)

Renwick, Matt

2015-01-01

What's keeping your school behind the technology curve? Is it a fear of the unfamiliar? Expenses? Or some other myth? Have you considered how students with special needs or students learning a second language may benefit from using digital tools? If you've fallen for the perception that technology is too expensive, unnecessary for real learning,…

Transforming health care the financial impact of technology, electronic tools and data mining

CERN Document Server

Fasano, Phil

2013-01-01

The future of healthcare technologies, and what they mean for investors and entrepreneurs The healthcare technology revolution is just around the corner. And when it arrives, it will change and enrich our lives in ways we can only begin to imagine. Doctors will perform blood pressure readings via video chat and nutritionists will analyze diet based on photos taken with cellphone cameras. Transforming Health Care combines healthcare, technology, and finance in an innovative new way that explains the future of healthcare and its effects on patient care, exploring the emergence of electronic tools that will transform the medical industry. Explaining how technology, not politics, will lead the future of the healthcare revolution, author and healthcare technology expert Phil Fasano presents real-life examples that show how the next generation of medical breakthroughs will come from the instant exchange of information across the world Explores how new technologies will radically change the future of healthcare by m...

Lifecycle Industry GreenHouse gas, Technology and Energy through the Use Phase (LIGHTEnUP) – Analysis Tool User’s Guide

Energy Technology Data Exchange (ETDEWEB)

Morrow, William R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Shehabi, Arman [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Smith, Sarah [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division

2016-06-22

The LIGHTEnUP Analysis Tool (Lifecycle Industry GreenHouse gas, Technology and Energy through the Use Phase) has been developed for The United States Department of Energy’s (U.S. DOE) Advanced Manufacturing Office (AMO) to forecast both the manufacturing sector and product life-cycle energy consumption implications of manufactured products across the U.S. economy. The tool architecture incorporates publicly available historic and projection datasets of U.S. economy-wide energy use including manufacturing, buildings operations, electricity generation and transportation. The tool requires minimal inputs to define alternate scenarios to business-as-usual projection data. The tool is not an optimization or equilibrium model and therefore does not select technologies or deployment scenarios endogenously. Instead, inputs are developed exogenous to the tool by the user to reflect detailed engineering calculations, future targets and goals, or creative insights. The tool projects the scenario’s energy, CO₂ emissions, and energy expenditure (i.e., economic spending to purchase energy) implications and provides documentation to communicate results. The tool provides a transparent and uniform system of comparing manufacturing and use-phase impacts of technologies. The tool allows the user to create multiple scenarios that can reflect a range of possible future outcomes. However, reasonable scenarios require careful attention to assumptions and details about the future. This tool is part of an emerging set of AMO’s life cycle analysis (LCA) tool such as the Material Flows the Industry (MFI) tool, and the Additive Manufacturing LCA tool.

Simulator technology as a tool for education in cardiac care.

Science.gov (United States)

Hravnak, Marilyn; Beach, Michael; Tuite, Patricia

2007-01-01

Assisting nurses in gaining the cognitive and psychomotor skills necessary to safely and effectively care for patients with cardiovascular disease can be challenging for educators. Ideally, nurses would have the opportunity to synthesize and practice these skills in a protected training environment before application in the dynamic clinical setting. Recently, a technology known as high fidelity human simulation was introduced, which permits learners to interact with a simulated patient. The dynamic physiologic parameters and physical assessment capabilities of the simulated patient provide for a realistic learning environment. This article describes the High Fidelity Human Simulation Laboratory at the University of Pittsburgh School of Nursing and presents strategies for using this technology as a tool in teaching complex cardiac nursing care at the basic and advanced practice nursing levels. The advantages and disadvantages of high fidelity human simulation in learning are discussed.

Integrated Biological Warfare Technology Platform (IBWTP). Intelligent Software Supporting Situation Awareness, Response, and Operations

Science.gov (United States)

2007-01-01

phases of the technology, QLI used a common software development and maintenance environment, called the Quantum Leap Uber Build System (QLUBS). QLI...May be used in internal tools and application. Using internally developed code on internal application ( Eating your own dogfood) provides

Modelling of teeth of a gear transmission for modern manufacturing technologies

Science.gov (United States)

Monica, Z.; Banaś, W.; Ćwikla, G.; Topolska, S.

2017-08-01

The technological process of manufacturing of gear wheels is influenced by many factors. It is designated depending on the type of material from which the gear is to be produced, its heat treatment parameters, the required accuracy, the geometrical form and the modifications of the tooth. Therefor the parameters selection process is not easy and moreover it is unambiguous. Another important stage of the technological process is the selection of appropriate tools to properly machine teeth in the operations of both roughing and finishing. In the presented work the focus is put first of all on modern production methods of gears using technologically advanced instruments in comparison with conventional tools. Conventional processing tools such as gear hobbing cutters or Fellows gear-shaper cutters are used from the beginning of the machines for the production of gear wheels. With the development of technology and the creation of CNC machines designated for machining of gears wheel it was also developed the manufacturing technology as well as the design knowledge concerning the technological tools. Leading manufacturers of cutting tools extended the range of tools designated for machining of gears on the so-called hobbing cutters with inserted cemented carbide tips. The same have be introduced to Fellows gear-shaper cutters. The results of tests show that is advantaged to use hobbing cutters with inserted cemented carbide tips for milling gear wheels with a high number of teeth, where the time gains are very high, in relation to the use of conventional milling cutters.

Simulation technologies in networking and communications selecting the best tool for the test

CERN Document Server

Pathan, Al-Sakib Khan; Khan, Shafiullah

2014-01-01

Simulation is a widely used mechanism for validating the theoretical models of networking and communication systems. Although the claims made based on simulations are considered to be reliable, how reliable they really are is best determined with real-world implementation trials.Simulation Technologies in Networking and Communications: Selecting the Best Tool for the Test addresses the spectrum of issues regarding the different mechanisms related to simulation technologies in networking and communications fields. Focusing on the practice of simulation testing instead of the theory, it presents

Research on Key Technologies of Unit-Based CNC Machine Tool Assembly Design

Directory of Open Access Journals (Sweden)

Zhongqi Sheng

2014-01-01

Full Text Available Assembly is the part that produces the maximum workload and consumed time during product design and manufacturing process. CNC machine tool is the key basic equipment in manufacturing industry and research on assembly design technologies of CNC machine tool has theoretical significance and practical value. This study established a simplified ASRG for CNC machine tool. The connection between parts, semantic information of transmission, and geometric constraint information were quantified to assembly connection strength to depict the assembling difficulty level. The transmissibility based on trust relationship was applied on the assembly connection strength. Assembly unit partition based on assembly connection strength was conducted, and interferential assembly units were identified and revised. The assembly sequence planning and optimization of parts in each assembly unit and between assembly units was conducted using genetic algorithm. With certain type of high speed CNC turning center, as an example, this paper explored into the assembly modeling, assembly unit partition, and assembly sequence planning and optimization and realized the optimized assembly sequence of headstock of CNC machine tool.

College Millennials and their Interaction with Social Mobile Tools

Directory of Open Access Journals (Sweden)

Sonia RUIZ BLANCO

2016-06-01

Full Text Available In the past few years College professors has the challenge of teaching the so-called “Generation Y” or “Millennials”, ie the age group born between 1980 and 2000 who raise with the existence of the Internet, which implies an approach to knowledge and learning different from previous generations. At college, especially more experienced professors are concerned over the possibility that learners knows these tools better than the professor himself, however, professors who have learned to use these new technologies have observed, surprisingly, as this age group can get to know many tools but not their proper use, in personal or professional environment. Over the past five years, we have conduced a survey about Web 2.0 tools used by learners, and their evolution over time as well as the use made of them. This article focuses on the relationship between students and mobile devices and how they they use these tools and services.

Evaluating the Impact of Information Technology Tools to Support the Asthma Medical Home.

Science.gov (United States)

Matiz, L Adriana; Robbins-Milne, Laura; Krause, M Christine; Peretz, Patricia J; Rausch, John C

2016-02-01

This study aimed to evaluate the impact of information technology tools on the outcomes of children with asthma in the medical home. A registry was established for children aged 4 to 18 years with an ICD-9 code for asthma. Changes to the electronic health record included modifications to notes, care plans, and orders. A retrospective analysis of emergency department and in-patient utilization for a cohort of patients was conducted from July 2009 through June 2013. Of the study population (n = 1217), 65% had a classification of asthma severity and 63% were risk-stratified. Seventy percent had a control assessment at least once. Care plan use increased from 5% to 22% and enrollment in care coordination increased from 0.1% to 4%. After 3 years, there was a reduction of emergency department and inpatient admissions for asthma (P information technology tools was associated with improved asthma outcomes. © The Author(s) 2015.

Marketing, Management and Performance: Multilingualism as Commodity in a Tourism Call Centre

Science.gov (United States)

Duchene, Alexandre

2009-01-01

This paper focuses on the ways an institution of the new economy--a tourism call centre in Switzerland--markets, manages and performs multilingual services. In particular, it explores the ways multilingualism operates as a strategic and managerial tool within tourism call centres and how the institutional regulation of language practices…

CALL in the Year 2000: A Look Back from 2016

Science.gov (United States)

Chapelle, Carol A.

2016-01-01

This commentary offers a brief reflection on the state of CALL in 1997, when "Language Learning & Technology" was launched with my paper entitled "CALL in the year 2000: Still in search of research paradigms?" The point of my 1997 paper was to suggest the potential value of research on second language learning for the study…

Laser formed intentional firearm microstamping technology: counterinsurgency intelligence gathering tool

Science.gov (United States)

Lizotte, Todd E.; Ohar, Orest P.

2009-09-01

Warfare relies on effective, accurate and timely intelligence an especially critical task when conducting a counterinsurgency operation [1]. Simply stated counterinsurgency is an intelligence war. Both insurgents and counterinsurgents need effective intelligence capabilities to be successful. Insurgents and counterinsurgents therefore attempt to create and maintain intelligence networks and fight continuously to neutralize each other's intelligence capabilities [1][2]. In such an environment it is obviously an advantage to target or proactively create opportunities to track and map an insurgent movement. Quickly identifying insurgency intelligence assets (Infiltrators) within a host government's infrastructure is the goal. Infiltrators can occupy various areas of government such as security personnel, national police force, government offices or military units. Intentional Firearm Microstamping offers such opportunities when implemented into firearms. Outfitted within firearms purchased and distributed to the host nation's security forces (civilian and military), Intentional Firearm Microstamping (IFM) marks bullet cartridge casings with codes as they are fired from the firearm. IFM is incorporated onto optimum surfaces with the firearm mechanism. The intentional microstamp tooling marks can take the form of alphanumeric codes or encoded geometric codes that identify the firearm. As the firearm is discharged the intentional tooling marks transfer a code to the cartridge casing which is ejected out of the firearm. When recovered at the scene of a firefight or engagement, the technology will provide forensic intelligence allowing the mapping and tracking of small arms traffic patterns within the host nation or identify insurgency force strength and pinpoint firearm sources, such as corrupt/rogue military units or police force. Intentional Firearm Microstamping is a passive mechanical trace technology that can be outfitted or retrofitted to semiautomatic handguns and

Identification of Technological Parameters of Ni-Alloys When Machining by Monolithic Ceramic Milling Tool

Science.gov (United States)

Czán, Andrej; Kubala, Ondrej; Danis, Igor; Czánová, Tatiana; Holubják, Jozef; Mikloš, Matej

2017-12-01

The ever-increasing production and the usage of hard-to-machine progressive materials are the main cause of continual finding of new ways and methods of machining. One of these ways is the ceramic milling tool, which combines the pros of conventional ceramic cutting materials and pros of conventional coating steel-based insert. These properties allow to improve cutting conditions and so increase the productivity with preserved quality known from conventional tools usage. In this paper, there is made the identification of properties and possibilities of this tool when machining of hard-to-machine materials such as nickel alloys using in airplanes engines. This article is focused on the analysis and evaluation ordinary technological parameters and surface quality, mainly roughness of surface and quality of machined surface and tool wearing.

Learning with Web Tools, Simulations, and Other Technologies in Science Classrooms

Science.gov (United States)

Campbell, Todd; Wang, Shaing Kwei; Hsu, Hui-Yin; Duffy, Aaron M.; Wolf, Paul G.

2010-10-01

This position paper proposes the enhancement of teacher and student learning in science classrooms by tapping the enormous potential of information communication and technologies (ICTs) as cognitive tools for engaging students in scientific inquiry. This paper serves to challenge teacher-held assumptions about students learning science `from technology' with a framework and examples of students learning science `with technology'. Whereas a high percentage of students are finding their way in using ICTs outside of school, for the most part they currently are not doing so inside of school in ways that they find meaningful and relevant to their lives. Instead, the pedagogical approaches that are most often experienced are out-of-step with how students use ICTs outside of schools and are not supportive of learning framed by constructivism. Here we describe a theoretical and pedagogical foundation for better connecting the two worlds of students' lives: life in school and life outside of school. This position paper is in response to the changing landscape of students' lives. The position is transformative in nature because it proposes the use of cyber-enabled resources for cultivating and leveraging students new literacy skills by learning `with technology' to enhance science learning.

Synchrotron light sources: A powerful tool for science and technology

International Nuclear Information System (INIS)

Schlachter, F.; Robinson, A.

1996-01-01

A new generation of synchrotron light sources is producing extremely bright beams of vacuum-ultraviolet and x-ray radiation, poweful new tools for research in a wide variety of basic and applied sciences. Spectromicroscopy using high spectral and spatial resolution is a new way of seeing, offering many opportunities in the study of matter. Development of a new light source provides the country or region of the world in which the light source is located many new opportunities: a focal point for research in many scientific and technological areas, a means of upgrading the technology infrastructure of the country, a means of training students, and a potential service to industry. A light source for Southeast Asia would thus be a major resource for many years. Scientists and engineers from light sources around the world look forward to providing assistance to make this a reality in Southeast Asia

Synchrotron light sources: A powerful tool for science and technology

International Nuclear Information System (INIS)

Schlachter, F.; Robinson, A.

1996-01-01

A new generation of synchrotron light sources is producing extremely bright beams of vacuum-ultraviolet and x-ray radiation, powerful new tools for research in a wide variety of basic and applied sciences. Spectromicroscopy using high spectral and spatial resolution is a new way of seeing, offering many opportunities in the study of matter. Development of a new light source provides the country or region of the world in which the light source is located many new opportunities: a focal point for research in many scientific and technological areas, a means of upgrading the technology infrastructure of the country, a means of training students, and a potential service to industry. A light source for Southeast Asia would thus be a major resource for many years. Scientists and engineers from light sources around the world look forward to providing assistance to make this a reality in Southeast Asia

The NASA Program Management Tool: A New Vision in Business Intelligence

Science.gov (United States)

Maluf, David A.; Swanson, Keith; Putz, Peter; Bell, David G.; Gawdiak, Yuri

2006-01-01

This paper describes a novel approach to business intelligence and program management for large technology enterprises like the U.S. National Aeronautics and Space Administration (NASA). Two key distinctions of the approach are that 1) standard business documents are the user interface, and 2) a "schema-less" XML database enables flexible integration of technology information for use by both humans and machines in a highly dynamic environment. The implementation utilizes patent-pending NASA software called the NASA Program Management Tool (PMT) and its underlying "schema-less" XML database called Netmark. Initial benefits of PMT include elimination of discrepancies between business documents that use the same information and "paperwork reduction" for program and project management in the form of reducing the effort required to understand standard reporting requirements and to comply with those reporting requirements. We project that the underlying approach to business intelligence will enable significant benefits in the timeliness, integrity and depth of business information available to decision makers on all organizational levels.

An evaluation of optical tool inspection and compensation technologies. CRADA final report for CRADA Number Y-1291-0052

Energy Technology Data Exchange (ETDEWEB)

Babelay, E.F. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Centola, J.; Zorger, W.; Serafin, W. [United Technologies, East Hartford, CT (United States). Pratt and Whitney Div.

1994-05-15

A Cooperative Research And Development Agreement (CRADA) was established April 1992 between Martin Marietta Energy Systems, Inc. and United Technologies Corporation, Pratt and Whitney Division to evaluate the existing applicability of the Energy Systems optical tool inspection and compensation system (OTICS) for use at Pratt and Whitney`s East Hartford Plant. The OTICS was developed at the Oak Ridge Y-12 Plant and optically measures the shape of a single point cutting tool. The tool shape inspection provides process information relating to tool wear and if desired the tool shape geometry can be used to generate a new numerical control machining program that is compensated for the tool forms errors. The tool wear measurement capability of OTICS was successfully evaluated in the Phase-1 testing. The testing verified that OTICS can easily detect tool wear and the {+-} 0.0001 inch resolution obtained was sufficient for the larger cutter inserts used by Pratt and Whitney (P and W). During the tool wear experiments at P and W, a second potential use identified for OTICS was the accurate on-machine dimensional verification of special ground contour forming tools. The OTICS tool path compensation experiment demonstrated the varied technologies that are integrated in the tool path compensation process. The OTICS system was successful at inspecting the 0.125 in. radius tool and compensating the tool path for tool form errors. The need for automated interfaces between the OTICS computer and controller along with the part program requirements and the overall compensation methodology were highlighted in the demonstration.

Teaching 2.0: Teams Keep Teachers and Students Plugged into Technology

Science.gov (United States)

Bourgeois, Michelle; Hunt, Bud

2011-01-01

A Colorado district develops a two-year program that gives teacher teams an opportunity to learn how to use digital tools in the classroom. Called the Digital Learning Collaborative, it is built on three things about professional learning: (1) Learning takes time; (2) Learning is a social process; and (3) Learning about technology should be…

SIFT – A language technology toolkit to assess the print media coverage of new forms of governance

OpenAIRE

Wüest, Bruno; Amsler, Michael; Schneider, Gerold

2017-01-01

For social scientists, it is increasingly important to explore large text collections without time-consuming human intervention. We are presenting a language technology tool kit that allows researchers of the NCCR Democracy Module 1 to extract information on various forms of governance from a comprehensive multilingual corpus. The tool kit called SIFT allows searching for governance entities and measuring their salience, tonality, issue context and media frames. In substantial terms, our tool...

Interpreting User's Choice of Technologies: A Quantitative Research on Choosing the Best Web-Based Communication Tools

Science.gov (United States)

Adebiaye, Richmond

2010-01-01

The proliferation of web-based communication tools like email clients vis-a-vis Yahoo mail, Gmail, and Hotmail have led to new innovations in web-based communication. Email users benefit greatly from this technology, but lack of security of these tools can put users at risk of loss of privacy, including identity theft, corporate espionage, and…

Intelligent engineering and technology for nuclear power plant operation

International Nuclear Information System (INIS)

Wang, P.P.; Gu, X.

1996-01-01

The Three-Mile-Island accident has drawn considerable attention by the engineering, scientific, management, financial, and political communities as well as society at large. This paper surveys possible causes of the accident studied by various groups. Research continues in this area with many projects aimed at specifically improving the performance and operation of a nuclear power plant using the contemporary technologies available. In addition to the known cause of the accident and suggest a strategy for coping with these problems in the future. With the increased use of intelligent methodologies called computational intelligence or soft-computing, a substantially larger collection of powerful tools are now available for our designers to use in order to tackle these sensitive and difficult issues. These intelligent methodologies consists of fuzzy logic, genetic algorithms, neural networks, artificial intelligence and expert systems, pattern recognition, machine intelligence, and fuzzy constraint networks. Using the Three-Mile-Island experience, this paper offers a set of specific recommendations for future designers to take advantage of the powerful tools of intelligent technologies that we are now able to master and encourages the adoption of a novel methodology called fuzzy constraint network

Risk analysis tools for force protection and infrastructure/asset protection

International Nuclear Information System (INIS)

Jaeger, C.D.; Duggan, R.A.; Paulus, W.K.

1998-01-01

The Security Systems and Technology Center at Sandia National Laboratories has for many years been involved in the development and use of vulnerability assessment and risk analysis tools. In particular, two of these tools, ASSESS and JTS, have been used extensively for Department of Energy facilities. Increasingly, Sandia has been called upon to evaluate critical assets and infrastructures, support DoD force protection activities and assist in the protection of facilities from terrorist attacks using weapons of mass destruction. Sandia is involved in many different activities related to security and force protection and is expanding its capabilities by developing new risk analysis tools to support a variety of users. One tool, in the very early stages of development, is EnSURE, Engineered Surety Using the Risk Equation. EnSURE addresses all of the risk equation and integrates the many components into a single, tool-supported process to help determine the most cost-effective ways to reduce risk. This paper will briefly discuss some of these risk analysis tools within the EnSURE framework

Extending the Will, Skill, Tool Model of Technology Integration: Adding Pedagogy as a New Model Construct

Science.gov (United States)

Knezek, Gerald; Christensen, Rhonda

2016-01-01

An expansion of the Will, Skill, Tool Model of Technology Integration to include teacher's pedagogical style is proposed by the authors as a means of advancing the predictive power of the model for level of classroom technology integration to beyond 90%. Suggested advantages to this expansion include more precise identification of areas to be…

Using poison center exposure calls to predict methadone poisoning deaths.

Directory of Open Access Journals (Sweden)

Nabarun Dasgupta

Full Text Available PURPOSE: There are more drug overdose deaths in the Untied States than motor vehicle fatalities. Yet the US vital statistics reporting system is of limited value because the data are delayed by four years. Poison centers report data within an hour of the event, but previous studies suggested a small proportion of poisoning deaths are reported to poison centers (PC. In an era of improved electronic surveillance capabilities, exposure calls to PCs may be an alternate indicator of trends in overdose mortality. METHODS: We used PC call counts for methadone that were reported to the Researched Abuse, Diversion and Addiction-Related Surveillance (RADARS® System in 2006 and 2007. US death certificate data were used to identify deaths due to methadone. Linear regression was used to quantify the relationship of deaths and poison center calls. RESULTS: Compared to decedents, poison center callers tended to be younger, more often female, at home and less likely to require medical attention. A strong association was found with PC calls and methadone mortality (b=0.88, se=0.42, t=9.5, df=1, p<0.0001, R(2 =0.77. These findings were robust to large changes in a sensitivity analysis assessing the impact of underreporting of methadone overdose deaths. CONCLUSIONS: Our results suggest that calls to poison centers for methadone are correlated with poisoning mortality as identified on death certificates. Calls received by poison centers may be used for timely surveillance of mortality due to methadone. In the midst of the prescription opioid overdose epidemic, electronic surveillance tools that report in real-time are powerful public health tools.

Laboratory informatics tools integration strategies for drug discovery: integration of LIMS, ELN, CDS, and SDMS.

Science.gov (United States)

Machina, Hari K; Wild, David J

2013-04-01

There are technologies on the horizon that could dramatically change how informatics organizations design, develop, deliver, and support applications and data infrastructures to deliver maximum value to drug discovery organizations. Effective integration of data and laboratory informatics tools promises the ability of organizations to make better informed decisions about resource allocation during the drug discovery and development process and for more informed decisions to be made with respect to the market opportunity for compounds. We propose in this article a new integration model called ELN-centric laboratory informatics tools integration.

An Environment for Analyzing Space Optimizations in Call-by-Need Functional Languages

Directory of Open Access Journals (Sweden)

Nils Dallmeyer

2017-01-01

Full Text Available We present an implementation of an interpreter LRPi for the call-by-need calculus LRP, based on a variant of Sestoft's abstract machine Mark 1, extended with an eager garbage collector. It is used as a tool for exact space usage analyses as a support for our investigations into space improvements of call-by-need calculi.

Factors Affecting the Normalization of CALL in Chinese Senior High Schools

Science.gov (United States)

He, Bi; Puakpong, Nattaya; Lian, Andrew

2015-01-01

With the development of Information Technology, increasing attention has been paid to Computer Assisted Language Learning (CALL). Meanwhile, increasing enthusiasm is seen for English learning and teaching in China. Yet, few research studies have focused on the normalization of CALL in ethnically diverse areas. In response to this research gap,…

Video-coaching as biofeedback tool to improve gated treatments. Possibilities and limitations

International Nuclear Information System (INIS)

Cossmann, Peter H.

2012-01-01

For respiratory gated radiotherapy the manufacturers of linear accelerators offer dedicated gating technologies. The video-based Varian RPM Gating system (Varian Medical Systems, Palo Alto/CA, USA) includes in a standard configuration a support tool for regular breathing called audiocoaching. As this approach has limitations regarding direct control of the patient's breathing due to a missing feedback, we designed an additional tool offering videocoaching. In order to evaluate the impact of this additional functionality, we measured parameters defining the image quality of 4D-CT data as well as the treatment duration which is mainly influenced by the patient's limited ability to achieve a stable breathing pattern. (orig.)

Workshop tools and methodologies for evaluation of energy chains and for technology perspective

Energy Technology Data Exchange (ETDEWEB)

Appert, O. [Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France); Maillard, D. [Energy and Raw Materials, 75 - Paris (France); Pumphrey, D. [Energy Cooperation, US Dept. of Energy (United States); Sverdrup, G.; Valdez, B. [National Renewable Energy Laboratory, Golden, CO (United States); Schindler, J. [LB-Systemtechnik (LBST), GmbH, Ottobrunn (Germany); His, St.; Rozakis, St. [Centre International de Recherche sur Environnement Developpement (CIRED), 94 - Nogent sur Marne (France); Sagisaka, M. [LCA Research Centre (Japan); Bjornstad, D. [Oak Ridge National Laboratory, Oak Ridge, Tennessee (United States); Madre, J.L. [Institut National de Recherche sur les Transports et leur Securite, 94 - Arcueil (France); Hourcade, J.Ch. [Centre International de Recherche sur l' Environnement le Developpement (CIRED), 94 - Nogent sur Marne (France); Ricci, A.; Criqui, P.; Chateau, B.; Bunger, U.; Jeeninga, H. [EU/DG-R (Italy); Chan, A. [National Research Council (Canada); Gielen, D. [IEA-International Energy Associates Ltd., Fairfax, VA (United States); Tosato, G.C. [Energy Technology Systems Analysis Programme (ETSAP), 75 - Paris (France); Akai, M. [Agency of Industrial Science and technology (Japan); Ziesing, H.J. [Deutsches Institut fur Wirtschaftsforschung, DIW Berlin (Germany); Leban, R. [Conservatoire National des Arts et Metiers (CNAM), 75 - Paris (France)

2005-07-01

The aims of this workshop is to better characterize the future in integrating all the dynamic interaction between the economy, the environment and the society. It offers presentations on the Hydrogen chains evaluation, the micro-economic modelling for evaluation of bio-fuel options, life cycle assessment evolution and potentialities, the consumer valuation of energy technologies attributes, the perspectives for evaluation of changing behavior, the incentive systems and barriers to social acceptability, the internalization of external costs, the endogenous technical change in long-tem energy models, ETSAP/technology dynamics in partial equilibrium energy models, very long-term energy environment modelling, ultra long-term energy technology perspectives, the socio-economic toolbox of the EU hydrogen road-map, the combined approach using technology oriented optimization and evaluation of impacts of individual policy measures and the application of a suite of basic research portfolio management tools. (A.L.B.)

Handbook of Research on Technology Tools for Real-World Skill Development (2 Volumes)

Science.gov (United States)

Rosen, Yigel, Ed.; Ferrara, Steve, Ed.; Mosharraf, Maryam, Ed.

2016-01-01

Education is expanding to include a stronger focus on the practical application of classroom lessons in an effort to prepare the next generation of scholars for a changing world economy centered on collaborative and problem-solving skills for the digital age. "The Handbook of Research on Technology Tools for Real-World Skill Development"…

Technology and Jobs: Computer-Aided Design. Numerical-Control Machine-Tool Operators. Office Automation.

Science.gov (United States)

Stanton, Michael; And Others

1985-01-01

Three reports on the effects of high technology on the nature of work include (1) Stanton on applications and implications of computer-aided design for engineers, drafters, and architects; (2) Nardone on the outlook and training of numerical-control machine tool operators; and (3) Austin and Drake on the future of clerical occupations in automated…

PRODUCTION OF PROTOTYPE PARTS USING DIRECT METAL LASER SINTERING TECHNOLOGY

Directory of Open Access Journals (Sweden)

Josef Sedlak

2015-08-01

Full Text Available Unconventional methods of modern materials preparation include additive technologies which involve the sintering of powders of different chemical composition, granularity, physical, chemical and other utility properties. The technology called Rapid Prototyping, which uses different technological principles of producing components, belongs to this type of material preparation. The Rapid Prototyping technology facilities use photopolymers, thermoplastics, specially treated paper or metal powders. The advantage is the direct production of metal parts from input data and the fact that there is no need for the production of special tools (moulds, press tools, etc.. Unused powder from sintering technologies is re-used for production 98% of the time, which means that the process is economical, as well as ecological.The present paper discusses the technology of Direct Metal Laser Sintering (DMLS, which falls into the group of additive technologies of Rapid Prototyping (RP. The major objective is a detailed description of DMLS, pointing out the benefits it offers and its application in practice. The practical part describes the production and provides an economic comparison of several prototype parts that were designed for testing in the automotive industry.

svclassify: a method to establish benchmark structural variant calls.

Science.gov (United States)

Parikh, Hemang; Mohiyuddin, Marghoob; Lam, Hugo Y K; Iyer, Hariharan; Chen, Desu; Pratt, Mark; Bartha, Gabor; Spies, Noah; Losert, Wolfgang; Zook, Justin M; Salit, Marc

2016-01-16

The human genome contains variants ranging in size from small single nucleotide polymorphisms (SNPs) to large structural variants (SVs). High-quality benchmark small variant calls for the pilot National Institute of Standards and Technology (NIST) Reference Material (NA12878) have been developed by the Genome in a Bottle Consortium, but no similar high-quality benchmark SV calls exist for this genome. Since SV callers output highly discordant results, we developed methods to combine multiple forms of evidence from multiple sequencing technologies to classify candidate SVs into likely true or false positives. Our method (svclassify) calculates annotations from one or more aligned bam files from many high-throughput sequencing technologies, and then builds a one-class model using these annotations to classify candidate SVs as likely true or false positives. We first used pedigree analysis to develop a set of high-confidence breakpoint-resolved large deletions. We then used svclassify to cluster and classify these deletions as well as a set of high-confidence deletions from the 1000 Genomes Project and a set of breakpoint-resolved complex insertions from Spiral Genetics. We find that likely SVs cluster separately from likely non-SVs based on our annotations, and that the SVs cluster into different types of deletions. We then developed a supervised one-class classification method that uses a training set of random non-SV regions to determine whether candidate SVs have abnormal annotations different from most of the genome. To test this classification method, we use our pedigree-based breakpoint-resolved SVs, SVs validated by the 1000 Genomes Project, and assembly-based breakpoint-resolved insertions, along with semi-automated visualization using svviz. We find that candidate SVs with high scores from multiple technologies have high concordance with PCR validation and an orthogonal consensus method MetaSV (99.7 % concordant), and candidate SVs with low scores are

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

Energy Technology Data Exchange (ETDEWEB)

Bill Stanley; Sandra Brown; Patrick Gonzalez; Brent Sohngen; Neil Sampson; Mark Anderson; Miguel Calmon; Sean Grimland; Ellen Hawes; Zoe Kant; Dan Morse; Sarah Woodhouse Murdock; Arlene Olivero; Tim Pearson; Sarah Walker; Jon Winsten; Chris Zganjar

2006-09-30

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st and July 30th 2006. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

Energy Technology Data Exchange (ETDEWEB)

Bill Stanley; Patrick Gonzalez; Sandra Brown; Jenny Henman; Zoe Kant; Sarah Woodhouse Murdock; Neil Sampson; Gilberto Tiepolo; Tim Pearson; Sarah Walker; Miguel Calmon

2006-01-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st , 2005 and June 30th, 2005. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

Energy Technology Data Exchange (ETDEWEB)

Bill Stanley; Patrick Gonzalez; Sandra Brown; Jenny Henman; Sarah Woodhouse Murdock; Neil Sampson; Tim Pearson; Sarah Walker; Zoe Kant; Miguel Calmon

2006-04-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between January 1st and March 31st 2006. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

Energy Technology Data Exchange (ETDEWEB)

Bill Stanley; Sandra Brown; Patrick Gonzalez; Brent Sohngen; Neil Sampson; Mark Anderson; Miguel Calmon; Sean Grimland; Zoe Kant; Dan Morse; Sarah Woodhouse Murdock; Arlene Olivero; Tim Pearson; Sarah Walker; Jon Winsten; Chris Zganjar

2007-03-31

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between January 1st and March 31st 2007. The specific tasks discussed include: Task 1--carbon inventory advancements; Task 2--emerging technologies for remote sensing of terrestrial carbon; Task 3--baseline method development; Task 4--third-party technical advisory panel meetings; Task 5--new project feasibility studies; and Task 6--development of new project software screening tool.

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

Energy Technology Data Exchange (ETDEWEB)

Bill Stanley; Patrick Gonzalez; Sandra Brown; Sarah Woodhouse Murdock; Jenny Henman; Zoe Kant; Gilberto Tiepolo; Tim Pearson; Neil Sampson; Miguel Calmon

2005-10-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st , 2005 and June 30th, 2005. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.

MOLT: A Mobile Learning Tool That Makes Learning New Technical English Language Words Enjoyable

Directory of Open Access Journals (Sweden)

Dogan - Ibrahim

2008-10-01

Full Text Available There is an increase use of wireless technologies in education all over the world. In fact, wireless technologies such as laptop computers, palmtop computers, and mobile phones are revolutionizing education and transforming the traditional classroom based learning and teaching into anytime and anywhere education. This paper investigates the use of wireless technologies in education with particular reference to the potential of learning new technical English Language words using SMS text messaging. The system, developed by the authors, called Mobile Learning Tool (MOLT, has been tested with 45 first-year undergraduate students. Students’ opinions have been collected after the experiment. Our results show that students enjoyed and be happy used mobile phones to learn new technical English word. We believe that if we add the improvements or modifications students wish to see in the MOLT system, then using the MOLT system as an educational tool will contribute to motivation and success of students.

Knowledge base technology for CT-DIMS: Report 1. [CT-DIMS (Cutting Tool - Database and Information Management System)

Energy Technology Data Exchange (ETDEWEB)

Kelley, E.E.

1993-05-01

This report discusses progress on the Cutting Tool-Database and Information Management System (CT-DIMS) project being conducted by the University of Illinois Urbana-Champaign (UIUC) under contract to the Department of Energy. This project was initiated in October 1991 by UIUC. The Knowledge-Based Engineering Systems Research Laboratory (KBESRL) at UIUC is developing knowledge base technology and prototype software for the presentation and manipulation of the cutting tool databases at Allied-Signal Inc., Kansas City Division (KCD). The graphical tool selection capability being developed for CT-DIMS in the Intelligent Design Environment for Engineering Automation (IDEEA) will provide a concurrent environment for simultaneous access to tool databases, tool standard libraries, and cutting tool knowledge.

Biomimetic agent based modelling using male Frog calling behaviour as a case study

DEFF Research Database (Denmark)

Jørgensen, Søren V.; Demazeau, Yves; Christensen-Dalsgaard, Jakob

2014-01-01

by individuals to generate their observed population behaviour. A number of existing agent-modelling frameworks are considered, but none have the ability to handle large numbers of time-dependent event-generating agents; hence the construction of a new tool, RANA. The calling behaviour of the Puerto Rican Tree...... Frog, E. coqui, is implemented as a case study for the presentation and discussion of the tool, and results from this model are presented. RANA, in its present stage of development, is shown to be able to handle the problem of modelling calling frogs, and several fruitful extensions are proposed...

The experience of work in a call centre environment

Directory of Open Access Journals (Sweden)

Sanet Hauptfleisch

2006-10-01

Full Text Available This qualitative research study explored the work experience in a call centre environment in an information technology call centre based in South Africa, which service foreign customers exclusively. Three data collection methods were used, namely narratives, in-depth interviews with call centre consultants, and observation. Following a grounded theory approach, four themes were elicited, namely the perceptions of team members, uncertainty created by a constantly changing environment, perceived distances due to management practices, and depersonalisation experienced while actually dealing with customers. In addition to this, the reported impact of these themes on work performance was explored and compared to existing research.

A New Roman World: Using Virtual Reality Technology as a Critical Teaching Tool.

Science.gov (United States)

Kuo, Elaine W.; Levis, Marc R.

The purpose of this study is to examine how technology, namely virtual reality (VR), can be developed as a critical pedagogical tool. More specifically, the study explores whether the use of VR can challenge the traditional lecture format and make the classroom a more student-centered environment. In this instance, VR is defined as a set of…

Application of a smartphone nurse call system for nursing care.

Science.gov (United States)

Chuang, Shu-Ting; Liu, Yi-Fang; Fu, Zi-Xuan; Liu, Kuang-Chung; Chien, Sou-Hsin; Lin, Chin-Lon; Lin, Pi-Yu

2015-02-01

Traditionally, a patient presses the nurse call button and alerts the central nursing station. This system cannot reach the primary care nurse directly. The aim of this study was to apply a new smartphone system through the cloud system and information technology that linked a smartphone and a mobile nursing station for nursing care service. A smartphone and mobile nursing station were integrated into a smartphone nurse call system through the cloud and information technology for better nursing care. Waiting time for a patient to contact the most responsible nurse was reduced from 3.8 min to 6 s. The average time for pharmacists to locate the nurse for medication problem was reduced from 4.2 min to 1.8 min by the new system. After implementation of the smartphone nurse call system, patients received a more rapid response. This improved patients' satisfaction and reduced the number of complaints about longer waiting time due to the shortage of nurses.

Stem cells technology: a powerful tool behind new brain treatments.

Science.gov (United States)

Duru, Lucienne N; Quan, Zhenzhen; Qazi, Talal Jamil; Qing, Hong

2018-06-18

Stem cell research has recently become a hot research topic in biomedical research due to the foreseen unlimited potential of stem cells in tissue engineering and regenerative medicine. For many years, medicine has been facing intense challenges, such as an insufficient number of organ donations that is preventing clinicians to fulfill the increasing needs. To try and overcome this regrettable matter, research has been aiming at developing strategies to facilitate the in vitro culture and study of stem cells as a tool for tissue regeneration. Meanwhile, new developments in the microfluidics technology brought forward emerging cell culture applications that are currently allowing for a better chemical and physical control of cellular microenvironment. This review presents the latest developments in stem cell research that brought new therapies to the clinics and how the convergence of the microfluidics technology with stem cell research can have positive outcomes on the fields of regenerative medicine and high-throughput screening. These advances will bring new translational solutions for drug discovery and will upgrade in vitro cell culture to a new level of accuracy and performance. We hope this review will provide new insights into the understanding of new brain treatments from the perspective of stem cell technology especially regarding regenerative medicine and tissue engineering.

Technology as a tool in autism spectrum disorder (ASD): an overview

OpenAIRE

Rasmussen, Tarje Evenssønn

2016-01-01

AIM: The aim of this thesis is to provide an overview of modern technology as a tool in diagnostics and treatment for children and adolescents with ASD. METHOD: A literature review was performed during early 2016, based on results from PubMed searches with MESH-tags “Autism” or “Autism Spectrum Disorder” and one of the following: “Technology”, “Robotics”, “Video Games”, “Video”, “Video Modeling”, “Diagnostics”, “Radiology” and “Virtual Reality”. RESULTS: Both studies about the use of technolo...

APPLICATION AND DEVELOPMENT OF APPROPRIATE TOOLS AND TECHNOLOGIES FOR COST-EFFECTIVE CARBON

Energy Technology Data Exchange (ETDEWEB)

Bill Stanley; Sandra Brown; Ellen Hawes; Zoe Kant; Miguel Calmon; Patrick Gonzalez; Brad Kreps; Gilberto Tiepolo

2003-09-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas impacts. The research described in this report occurred between July 1, 2002 and June 30, 2003. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: advanced videography testing; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.

Investigating Language Learning Activity Using a CALL Task in the Self-access Centre

Directory of Open Access Journals (Sweden)

Carlos Montoro

2011-09-01

Full Text Available This article describes a small study of the language learning activity of individual learners using a CALL task in a self-access environment. The research focuses on the nature of the language learning activity, the most salient elements that make up its structure and major disturbances observed between and within some of those elements. It is set in the context of computer-assisted language learning (CALL and activity theory. A CALL task designed by the authors was made available online to be used as a research and learning tool. Empirical data was collected from two participants using ethnographic tools, such as participant observation and stimulated recall sessions. The analysis focuses on disturbances mainly involving the subject (i.e., the learner, mediating artefacts (e.g., the CALL task, the community (e.g., management and other self-access centre users and the object of the activity (i.e., learning English. It is recommended that future studies should look deeper into contradictions in the learning activity from a cultural-historical perspective.

Tool-Supported User-Centred Prototyping of Mobile Applications

DEFF Research Database (Denmark)

Leichtenstern, Karin; André, Elisabeth; Rehm, Matthias

2011-01-01

the process both cost-effective and time-effective. In this paper we cover that problem and provide insights in so-called user-centered prototyping (UCP) tools which support the production of prototypes as well as their evaluation with end-users. In particular, we introduce our UCP tool called Mo...

Impediments to Effective Utilisation of Information and Communication Technology Tools in Selected Universities in the North-Eastern Nigeria

Science.gov (United States)

Momoh, Mustapha

2010-01-01

This study examined the impediments to effective use of Information and Communication Technology (ICT) tools in Nigerian universities. Series of research conducted on the factors militating against computerisation indicated that, there were impediments to effective utilisation of ICT tools in most developing countries. In the light of this, the…

Calling the shots

Energy Technology Data Exchange (ETDEWEB)

Potts, A.

2000-04-01

Sophisticated technologies and tools have come to the aid of the blasting technology industry. These include computer-based blast design, GPS technology and use of electronic detonating. Either emulsion or blends of emulsion and ANFO are being increasingly used as explosives. Contract blasting packages are becoming popular. Electric detonators have been largely replaced by simpler non-electric 'shock tube' initiation systems. These in turn are being replaced by electronic initiation systems which have precise time control. Recent developments or electron detonators from Dynbamit Nobel, African Explosives Ltd. (AEL), Dyno Nobel and Ensigh Bickford are mentioned in the article. Many manufacturers are offering their own charging vehicles with their explosive systems for surface and underground blasting. Dyno Nobel's site sensitised emulsion (SSE) system has a loading ruck, two storage tank containers and two pumps for the emulsion matrix and chemical sensitiser. The ANFO P1-AN/FO trick from Dax Machinery is mounted on an articulated carrier with an on-board compressor. Normet's Charmet machines have a superboom lift and extendable platform and a 1000 t capacity emulsion charging unit. 6 photos

Creating a vision for your medical call center.

Science.gov (United States)

Barr, J L; Laufenberg, S; Sieckman, B L

1998-01-01

MCC technologies and applications that can have a positive impact on managed care delivery are almost limitless. As you determine your vision, be sure to have in mind the following questions: (1) Do you simply want an efficient front end for receiving calls? (2) Do you want to offer triage services? (3) Is your organization ready for a fully functional "electronic physician's office?" Understand your organization's strategy. Where are you going, not only today but five years from now? That information is essential to determine your vision. Once established, your vision will help determine what you need and whether you should build or outsource. Vendors will assist in cost/benefit analysis of their equipment, but do not lose sight of internal factors such as "prior inclination" costs in the case of a nurse triage program. The technology is available to take your vision to its outer reaches. With the projected increase in utilization of call center services, don't let your organization be left behind!

From deep water to deep rock: MWD/LWD technology advancing

Energy Technology Data Exchange (ETDEWEB)

Jaremko, D.

2004-01-01

Measurement-while-drilling (MWD) and logging-while-drilling (LWD) tools that help operators learn about the geological formations they drill while drilling them, are discussed. New MWD and LWD systems are quickly being developed for both offshore and onshore applications, even though both services are relatively expensive. For the offshore market a new seismic-while-drilling LWD tool has just been introduced by Schlumberger. The seismicVision tool acquires and transmits traditional borehole seismic data without interrupting drilling operations. Similarly, Baker-Atlas also introduced a new LWD system for onshore applications that uses advanced downhole sensing technology in a shorter, lighter, reliable instrument package to carry out well logging with accuracy and precision at up to twice the speed of conventional technology. Precision Drilling Inc. also has a new MWD system out, called HEL (hostile environment logging) which is designed to address shortcomings of currently available deepwater MWD systems. The HEL MWD is rated to operate at downhole pressures of up to 30,000 psi and temperatures of up to 180 degrees C. The entire system, including telemetry tools, environmental severity measurement sensors, and other sophisticated measuring tools are housed in one drill collar. photos.

APT, The Phase I tool for HST Cycle 12

Science.gov (United States)

Blacker, Brett S.; Bertch, Maria; Curtis, Gary; Douglas, Robert E., Jr.; Krueger, Anthony P.

2002-12-01

In the continuing effort to streamline our systems and improve service to the science community, the Space Telescope Science Institute (STScI) is developing and releasing, APT The Astronomer’s Proposal Tool as the new interface for Hubble Space Telescope (HST) Phase I and Phase II proposal submissions for HST Cycle 12. APT, was formerly called the Scientist’s Expert Assistant (SEA), which started as a prototype effort to try and bring state of the art technology, more visual tools and power into the hands of proposers so that they can optimize the scientific return of their programs as well as HST. Proposing for HST and other missions, consists of requesting observing time and/or archival research funding. This step is called Phase I, where the scientific merit of a proposal is considered by a community based peer-review process. Accepted proposals then proceed thru Phase II, where the observations are specified in sufficient detail to enable scheduling on the telescope. In this paper, we will present our concept and implementation plans for our Phase I development and submission tool, APT. More importantly, we will go behind the scenes and discuss why it’s important for the Science Policies Division (SPD) and other groups at the STScI to have a new submission tool and submission output products. This paper is an update of the status of the HST Phase I Proposal Processing System that was described in the published paper “A New Era for HST Phase I Development and Submission.”

Integration of ROOT Notebooks as a Web-based ATLAS Analysis tool for public data releases and outreach

CERN Document Server

Banda, Tea; CERN. Geneva. EP Department

2016-01-01

The project consists in the initial development of ROOT notebooks for a Z boson analysis in C++ programming language that will allow students and researches to perform fast and very useful data analysis, using ATLAS public data and Monte- Carlo simulations. Several tools are considered: ROOT Data Analysis Frame- work, Jupyter Notebook Technology and CERN-ROOT computing service so-called SWAN.

Decision support tool for used oil regeneration technologies assessment and selection.

Science.gov (United States)

Khelifi, Olfa; Dalla Giovanna, Fabio; Vranes, Sanja; Lodolo, Andrea; Miertus, Stanislav

2006-09-01

Regeneration is the most efficient way of managing used oil. It saves money by preventing costly cleanups and liabilities that are associated with mismanagement of used oil, it helps to protect the environment and it produces a technically renewable resource by enabling an indefinite recycling potential. There are a variety of processes and licensors currently offering ways to deal with used oils. Selecting a regeneration technology for used oil involves "cross-matching" key criteria. Therefore, the first prototype of spent oil regeneration (SPORE), a decision support tool, has been developed to help decision-makers to assess the available technologies and select the preferred used oil regeneration options. The analysis is based on technical, economical and environmental criteria. These criteria are ranked to determine their relative importance for a particular used oil regeneration project. The multi-criteria decision analysis (MCDA) is the core of the SPORE using the PROMETHEE II algorithm.

Evaluating the Motivational Impact of CALL Systems: Current Practices and Future Directions

Science.gov (United States)

Bodnar, Stephen; Cucchiarini, Catia; Strik, Helmer; van Hout, Roeland

2016-01-01

A major aim of computer-assisted language learning (CALL) is to create computer environments that facilitate students' second language (L2) acquisition. To achieve this aim, CALL employs technological innovations to create novel types of language practice. Evaluations of the new practice types serve the important role of distinguishing effective…

Video-coaching as biofeedback tool to improve gated treatments. Possibilities and limitations

Energy Technology Data Exchange (ETDEWEB)

Cossmann, Peter H. [Medtech Consulting Cossmann, Wettingen (Switzerland); Private Univ. im Fuerstentum Liechtenstein, Triesen (Liechtenstein)

2012-11-01

For respiratory gated radiotherapy the manufacturers of linear accelerators offer dedicated gating technologies. The video-based Varian RPM Gating system (Varian Medical Systems, Palo Alto/CA, USA) includes in a standard configuration a support tool for regular breathing called audiocoaching. As this approach has limitations regarding direct control of the patient's breathing due to a missing feedback, we designed an additional tool offering videocoaching. In order to evaluate the impact of this additional functionality, we measured parameters defining the image quality of 4D-CT data as well as the treatment duration which is mainly influenced by the patient's limited ability to achieve a stable breathing pattern. (orig.)

Taking the Danish Speech Trainer from CALL to ICALL

DEFF Research Database (Denmark)

Juel Henrichsen, Peter

2015-01-01

Talebob (Speech Bob) is a newly developed interactive CALL-tool for training Danish speech with special regard to the pronunciation of highly idiomatic phrases. Talebob is currently being tested in primary schools in Nuuk, Hafnarfjörður and Tórshavn (where Danish is taught as a L2). The purpose...

When does a protein become an allergen? Searching for a dynamic definition based on most advanced technology tools.

Science.gov (United States)

Mari, A

2008-07-01

Since the early beginning of allergology as a science considerable efforts have been made by clinicians and researchers to identify and characterize allergic triggers as raw allergenic materials, allergenic sources and tissues, and more recently basic allergenic structures defined as molecules. The last 15-20 years have witnessed many centres focusing on the identification and characterization of allergenic molecules leading to an expanding wealth of knowledge. The need to organize this information leads to the most important question 'when does a protein become an allergen?' In this article, I try to address this question by reviewing a few basic concepts of the immunology of IgE-mediated diseases, reporting on the current diagnostic and epidemiological tools used for allergic disease studies and discussing the usefulness of novel biotechnology tools (i.e. proteomics and molecular biology approaches), information technology tools (i.e. Internet-based resources) and microtechnology tools (i.e. proteomic microarray for IgE testing on molecular allergens). A step-wise staging of the identification and characterization process, including bench, clinical and epidemiological aspects, is proposed, in order to classify allergenic molecules dynamically. This proposal reflects the application and use of all the new tools available from current technologies.

Technology Foresight: A Tool for sustainability

Directory of Open Access Journals (Sweden)

Iraj Nabipour

2011-09-01

Full Text Available Our age is one of very rapid progress in the sciences and technologies, together with Globalization. Thus, interrelationships between science, technology and society are becoming more complex. This makes economic and social trends more difficult to predict and hence, more sophisticated approaches are needed to predict new challenges in science and technology. Technology foresight is the most attractive approach. In fact, technology foresight is a “… a systematic means of assessing those scientific and technological developments which could have a strong impact on industrial competitiveness, wealth creation and quality of life. This book presents a brief review or foresighting theory and methods. The book provides a series of key methodologies along with a discussion of how technology foresight relates to sustainability.

Development of a clinical information tool for the electronic medical record: a case study.

Science.gov (United States)

Epstein, Barbara A; Tannery, Nancy H; Wessel, Charles B; Yarger, Frances; LaDue, John; Fiorillo, Anthony B

2010-07-01

What is the process of developing a clinical information tool to be embedded in the electronic health record of a very large and diverse academic medical center? The development took place at the University of Pittsburgh Health Sciences Library System. The clinical information tool developed is a search box with subject tabs to provide quick access to designated full-text information resources. Each subject tab offers a federated search of a different pool of resources. Search results are organized "on the fly" into meaningful categories using clustering technology and are directly accessible from the results page. After more than a year of discussion and planning, a clinical information tool was embedded in the academic medical center's electronic health record. The library successfully developed a clinical information tool, called Clinical-e, for use at the point of care. Future development will refine the tool and evaluate its impact and effectiveness.

An applied artificial intelligence approach towards assessing building performance simulation tools

Energy Technology Data Exchange (ETDEWEB)

Yezioro, Abraham [Faculty of Architecture and Town Planning, Technion IIT (Israel); Dong, Bing [Center for Building Performance and Diagnostics, School of Architecture, Carnegie Mellon University (United States); Leite, Fernanda [Department of Civil and Environmental Engineering, Carnegie Mellon University (United States)

2008-07-01

With the development of modern computer technology, a large amount of building energy simulation tools is available in the market. When choosing which simulation tool to use in a project, the user must consider the tool's accuracy and reliability, considering the building information they have at hand, which will serve as input for the tool. This paper presents an approach towards assessing building performance simulation results to actual measurements, using artificial neural networks (ANN) for predicting building energy performance. Training and testing of the ANN were carried out with energy consumption data acquired for 1 week in the case building called the Solar House. The predicted results show a good fitness with the mathematical model with a mean absolute error of 0.9%. Moreover, four building simulation tools were selected in this study in order to compare their results with the ANN predicted energy consumption: Energy{sub 1}0, Green Building Studio web tool, eQuest and EnergyPlus. The results showed that the more detailed simulation tools have the best simulation performance in terms of heating and cooling electricity consumption within 3% of mean absolute error. (author)

I've got a mobile phone too! Hard and soft assistive technology customization and supportive call centres for people with disability.

Science.gov (United States)

Darcy, Simon; Green, Jenny; Maxwell, Hazel

2017-05-01

The purpose of this article is to examine the use of a mobile technology platform, software customization and technical support services by people with disability. The disability experience is framed through the participants' use of the technology, their social participation. A qualitative and interpretive research design was employed using a three-stage process of observation and semi-structured interviews of people with disability, a significant other and their service provider. Transcripts were analyzed to examine the research questions through the theoretical framework of PHAATE - Policy, Human, Activity, Assistance and Technology and Environment. The analysis revealed three emergent themes: 1. Engagement and activity; 2. Training, support and customization; and 3. Enablers, barriers and attitudes. The findings indicate that for the majority of users, the mobile technology increased the participants' communication and social participation. However, this was not true for all members of the pilot with variations due to disability type, support needs and availability of support services. Most participants, significant others and service providers identified improvements in confidence, security, safety and independence of those involved. Yet, the actions and attitudes of some of the significant others and service providers acted as a constraint to the adoption of the technology. Implications for Rehabilitation Customized mobile technology can operate as assistive technology providing a distinct benefit in terms of promoting disability citizenship. Mobile technology used in conjunction with a supportive call centre can lead to improvements in confidence, safety and independence for people experiencing disability. Training and support are critical in increasing independent use of mobile technology for people with disability. The enjoyment, development of skills and empowerment gained through the use of mobile technology facilitate the social inclusion of people with

The Game Embedded CALL System to Facilitate English Vocabulary Acquisition and Pronunciation

Science.gov (United States)

Young, Shelley Shwu-Ching; Wang, Yi-Hsuan

2014-01-01

The aim of this study is to make a new attempt to explore the potential of integrating game strategies with automatic speech recognition technologies to provide learners with individual opportunities for English pronunciation learning. The study developed the Game Embedded CALL (GeCALL) system with two activities for on-line speaking practice. For…

Utilization of a Text and Translation Application for Communication With a Foreign Deaf Family: A Call for Validation of This Technology-A Case Report.

Science.gov (United States)

Fernandez, Patrick G; Brockel, Megan A; Lipscomb, Lisa L; Ing, Richard J; Tailounie, Muayyad

2017-07-15

Effective communication with patients is essential to quality care. Obviously, language barriers significantly impact this and can increase the risk of poor patient outcomes. Smartphones and mobile health technology are valuable resources that are beginning to break down language barriers in health care. We present a case of a challenging language barrier where successful perioperative communication was achieved using mobile technology. Although quite beneficial, use of technology that is not validated exposes providers to unnecessary medicolegal risk. We hope to highlight the need for validation of such technology to ensure that these tools are an effective way to accurately communicate with patients in the perioperative setting.

Emergency distress call system for automobiles in Lagos state, Nigeria

African Journals Online (AJOL)

Emergency distress call system for automobiles in Lagos state, Nigeria. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... and communications technology capabilities to transportation and the medical care system in order to save lives, ...

Employing mobile media technologies as a participatory planning tool in the suburban housing estate

DEFF Research Database (Denmark)

Andersson, Lasse; Knudsen, Anne-Marie Sanvig

2013-01-01

an on-going process, informed by mobile citizen generated information loops (open-source), the aim was to move beyond the master plan as a detached expert-driven product and towards an instant master planning process. In order to explore this iterative take on the planning process the research team...... and consulting firm employed mobile media technologies as a tool for creating new forms of citizen engagement. Based on the lessons learned from the research and development project we conclude by looking at what mobile media technologies afforded this planning process and what these experiences might add...

High-tech tools for exercise motivation: use and role of technologies such as the internet, mobile applications, social media, and video games.

Science.gov (United States)

Tate, Deborah F; Lyons, Elizabeth J; Valle, Carmina G

2015-01-01

IN BRIEF The majority of patients with type 2 diabetes are not active at recommended levels, and many do not have access to behavior change programs to support lifestyle change. Thus, tools and programs designed to promote the adoption and maintenance of physical activity using technology may be helpful. This article reviews the evidence regarding the use of technology tools such as the Internet, mobile applications, social media, and video games and provides suggestions for evaluating the potential benefit of such tools for behavior change.

High-Tech Tools for Exercise Motivation: Use and Role of Technologies Such as the Internet, Mobile Applications, Social Media, and Video Games

Science.gov (United States)

Lyons, Elizabeth J.; Valle, Carmina G.

2015-01-01

IN BRIEF The majority of patients with type 2 diabetes are not active at recommended levels, and many do not have access to behavior change programs to support lifestyle change. Thus, tools and programs designed to promote the adoption and maintenance of physical activity using technology may be helpful. This article reviews the evidence regarding the use of technology tools such as the Internet, mobile applications, social media, and video games and provides suggestions for evaluating the potential benefit of such tools for behavior change. PMID:25717278

What Do Monkey Calls Mean?

Science.gov (United States)

Schlenker, Philippe; Chemla, Emmanuel; Zuberbühler, Klaus

2016-12-01

A field of primate linguistics is gradually emerging. It combines general questions and tools from theoretical linguistics with rich data gathered in experimental primatology. Analyses of several monkey systems have uncovered very simple morphological and syntactic rules and have led to the development of a primate semantics that asks new questions about the division of semantic labor between the literal meaning of monkey calls, additional mechanisms of pragmatic enrichment, and the environmental context. We show that comparative studies across species may validate this program and may in some cases help in reconstructing the evolution of monkey communication over millions of years. Copyright © 2016. Published by Elsevier Ltd.

Emerging Technologies Focusing on Form: Tools and Strategies

Science.gov (United States)

Godwin-Jones, Robert

2009-01-01

Using computers to help students practice and learn grammatical constructions goes back to the earliest days of computer-assisted language learning (CALL). With the coming of the Internet age, CALL began to focus more heavily on the new capabilities of group connectivity and computer-mediated communication. More recently, a gathering consensus has…

Occupational voice demands and their impact on the call-centre industry

Directory of Open Access Journals (Sweden)

Duffy OM

2009-04-01

Full Text Available Abstract Background Within the last decade there has been a growth in the call-centre industry in the UK, with a growing awareness of the voice as an important tool for successful communication. Occupational voice problems such as occupational dysphonia, in a business which relies on healthy, effective voice as the primary professional communication tool, may threaten working ability and occupational health and safety of workers. While previous studies of telephone call-agents have reported a range of voice symptoms and functional vocal health problems, there have been no studies investigating the use and impact of vocal performance in the communication industry within the UK. This study aims to address a significant gap in the evidence-base of occupational health and safety research. The objectives of the study are: 1. to investigate the work context and vocal communication demands for call-agents; 2. to evaluate call-agents' vocal health, awareness and performance; and 3. to identify key risks and training needs for employees and employers within call-centres. Methods and design This is an occupational epidemiological study, which plans to recruit call-centres throughout the UK and Ireland. Data collection will consist of three components: 1. interviews with managers from each participating call-centre to assess their communication and training needs; 2. an online biopsychosocial questionnaire will be administered to investigate the work environment and vocal demands of call-agents; and 3. voice acoustic measurements of a random sample of participants using the Multi-dimensional Voice Program (MDVP. Qualitative content analysis from the interviews will identify underlying themes and issues. A multivariate analysis approach will be adopted using Structural Equation Modelling (SEM, to develop voice measurement models in determining the construct validity of potential factors contributing to occupational dysphonia. Quantitative data will be

Surveying and optical tooling technologies combined to align a skewed beamline at the LAMPF accelerator

International Nuclear Information System (INIS)

Bauke, W.; Clark, D.A.; Trujillo, P.B.

1985-01-01

Optical Tooling evolved from traditional surveying, and both technologies are sometimes used interchangeably in large industrial installations, since the instruments and their specialized adapters and supports complement each other well. A unique marriage of both technologies was accomplished in a novel application at LAMPF, the Los Alamos Meson Physics Facility. LAMPF consists of a linear accelerator with multiple target systems, one of which had to be altered to accommodate a new beamline for a neutrino experiment. The new line was to be installed into a crowded beam tunnel and had to be skewed and tilted in compound angles to avoid existing equipment. In this paper we describe how Optical Tooling was used in conjunction with simple alignment and reference fixtures to set fiducials on the magnets and other mechanical components of the beamline, and how theodolites and sight levels were then adapted to align these components along the calculated skew planes. Design tolerances are compared with measured alignment results

Epidemiology of transmissible diseases: Array hybridization and next generation sequencing as universal nucleic acid-mediated typing tools.

Science.gov (United States)

Michael Dunne, W; Pouseele, Hannes; Monecke, Stefan; Ehricht, Ralf; van Belkum, Alex

2017-09-21

The magnitude of interest in the epidemiology of transmissible human diseases is reflected in the vast number of tools and methods developed recently with the expressed purpose to characterize and track evolutionary changes that occur in agents of these diseases over time. Within the past decade a new suite of such tools has become available with the emergence of the so-called "omics" technologies. Among these, two are exponents of the ongoing genomic revolution. Firstly, high-density nucleic acid probe arrays have been proposed and developed using various chemical and physical approaches. Via hybridization-mediated detection of entire genes or genetic polymorphisms in such genes and intergenic regions these so called "DNA chips" have been successfully applied for distinguishing very closely related microbial species and strains. Second and even more phenomenal, next generation sequencing (NGS) has facilitated the assessment of the complete nucleotide sequence of entire microbial genomes. This technology currently provides the most detailed level of bacterial genotyping and hence allows for the resolution of microbial spread and short-term evolution in minute detail. We will here review the very recent history of these two technologies, sketch their usefulness in the elucidation of the spread and epidemiology of mostly hospital-acquired infections and discuss future developments. Copyright © 2017 Elsevier B.V. All rights reserved.

Research and development of grid computing technology in center for computational science and e-systems of Japan Atomic Energy Agency

International Nuclear Information System (INIS)

Suzuki, Yoshio

2007-01-01

Center for Computational Science and E-systems of the Japan Atomic Energy Agency (CCSE/JAEA) has carried out R and D of grid computing technology. Since 1995, R and D to realize computational assistance for researchers called Seamless Thinking Aid (STA) and then to share intellectual resources called Information Technology Based Laboratory (ITBL) have been conducted, leading to construct an intelligent infrastructure for the atomic energy research called Atomic Energy Grid InfraStructure (AEGIS) under the Japanese national project 'Development and Applications of Advanced High-Performance Supercomputer'. It aims to enable synchronization of three themes: 1) Computer-Aided Research and Development (CARD) to realize and environment for STA, 2) Computer-Aided Engineering (CAEN) to establish Multi Experimental Tools (MEXT), and 3) Computer Aided Science (CASC) to promote the Atomic Energy Research and Investigation (AERI). This article reviewed achievements in R and D of grid computing technology so far obtained. (T. Tanaka)

EUV source development for high-volume chip manufacturing tools

Science.gov (United States)

Stamm, Uwe; Yoshioka, Masaki; Kleinschmidt, Jürgen; Ziener, Christian; Schriever, Guido; Schürmann, Max C.; Hergenhan, Guido; Borisov, Vladimir M.

2007-03-01

Xenon-fueled gas discharge produced plasma (DPP) sources were integrated into Micro Exposure Tools already in 2004. Operation of these tools in a research environment gave early learning for the development of EUV sources for Alpha and Beta-Tools. Further experiments with these sources were performed for basic understanding on EUV source technology and limits, especially the achievable power and reliability. The intermediate focus power of Alpha-Tool sources under development is measured to values above 10 W. Debris mitigation schemes were successfully integrated into the sources leading to reasonable collector mirror lifetimes with target of 10 billion pulses due to the effective debris flux reduction. Source collector mirrors, which withstand the radiation and temperature load of Xenon-fueled sources, have been developed in cooperation with MediaLario Technologies to support intermediate focus power well above 10 W. To fulfill the requirements for High Volume chip Manufacturing (HVM) applications, a new concept for HVM EUV sources with higher efficiency has been developed at XTREME technologies. The discharge produced plasma (DPP) source concept combines the use of rotating disk electrodes (RDE) with laser exited droplet targets. The source concept is called laser assisted droplet RDE source. The fuel of these sources has been selected to be Tin. The conversion efficiency achieved with the laser assisted droplet RDE source is 2-3x higher compared to Xenon. Very high pulse energies well above 200 mJ / 2π sr have been measured with first prototypes of the laser assisted droplet RDE source. If it is possible to maintain these high pulse energies at higher repetition rates a 10 kHz EUV source could deliver 2000 W / 2π sr. According to the first experimental data the new concept is expected to be scalable to an intermediate focus power on the 300 W level.

Blended call center with idling times during the call service

NARCIS (Netherlands)

Legros, Benjamin; Jouini, Oualid; Koole, Ger

We consider a blended call center with calls arriving over time and an infinitely backlogged amount of outbound jobs. Inbound calls have a non-preemptive priority over outbound jobs. The inbound call service is characterized by three successive stages where the second one is a break; i.e., there is

City without barriers, ICT tools for the universal accessibility: study cases in Barcelona

OpenAIRE

Biere Arenas, Rolando Mauricio; Arellano Ramos, Blanca; Roca Cladera, Josep

2016-01-01

Financed in the framework of the Call 2013, of the Program RecerCaixa (RecerCaixa and ACUP) This paper is the presentation of the results and developed tasks in the framework of the research project titled City without barriers. Tool for the evaluation and visualization of the accessibility into public space, using TLS, GIS and GPS Technologies,1 developed during 2014 and 2015 by the authors and others researchers and technicians in the Centre of Land Policy and Valuations (CPSV) and the V...

New CALL-SLA Research Interfaces for the 21st Century: Towards Equitable Multilingualism

Science.gov (United States)

Ortega, Lourdes

2017-01-01

The majority of the world is multilingual, but inequitably multilingual, and much of the world is also technologized, but inequitably so. Thus, researchers in the fields of computer-assisted language learning (CALL) and second language acquisition (SLA) would profit from considering multilingualism and social justice when envisioning new CALL-SLA…

Using Innovative Knowledge Management Tools for Information Technology Development, Acquisition, and Integration in the United States Army

Science.gov (United States)

2007-06-15

wireless KM tool that suffers from lack of notoriety is the National Security Agency’s (NSA) wireless technology vulnerabilities database ( VAPED ). This...in the unpopularity of programs like the VAPED and the demise of the Quantum Leap exercise. The commercial world is producing even more technology... VAPED , the SDR forum, the WiMAX forum, GCN Labs and others previously cited are examples of readily available government and commercial IT knowledge

THE APPLICATION AND DEVELOPMENT OF APPROPRIATE TOOLS AND TECHNOLOGIES FOR COST-EFFECTIVE CARBON SEQUESTRATION

Energy Technology Data Exchange (ETDEWEB)

Bill Stanley; Sandra Brown; Ellen Hawes; Zoe Kant; Miguel Calmon; Gilberto Tiepolo

2002-09-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research projects is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas impacts. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: advanced videography testing; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.

Information technologies and the transformation of nursing education.

Science.gov (United States)

Skiba, Diane J; Connors, Helen R; Jeffries, Pamela R

2008-01-01

Higher education is facing new challenges with the emergence of the Internet and other information and communication technologies. The call for the transformation of higher education is imperative. This article describes the transformation of higher education and its impact on nursing education. Nursing education, considered by many a pioneer in the use of educational technologies, still faces 3 major challenges. The first challenge is incorporation of the Institute of Medicine's recommendation of 5 core competencies for all health professionals. The second challenge focuses on the preparation of nurses to practice in informatics-intensive healthcare environments. The last challenge is the use of emerging technologies, such as Web 2.0 tools, that will help to bridge the gap between the next generation and faculty in nursing schools. Nurse educators need to understand and use the power of technologies to prepare the next generation of nurses.

Why all anthropology should be called techno-anthropology

DEFF Research Database (Denmark)

Birkbak, Andreas

2013-01-01

This chapter argues that if we follow a pragmatist understanding of humans and technologies, there is no reason to keep these phenomena strongly separated. The suggestion that all anthropology should be called techno-anthropology might provoke some readers, but it is first and foremost intended...... of such efforts, namely Sherry Turkle’s recent work on care robots and other new technologies that mediate human relationships. I move on to suggest that with Latour’s notion of delegation, such mediation appears less alien. In order to develop further the consequences of Latour’s techno-anthropologist moves, I...

An innovative simulation tool for waste to energy generation opportunities

Directory of Open Access Journals (Sweden)

Bilal Abderezzak

2017-03-01

Full Text Available The new world energy policies encourage the use of renewable energy sources with clean technologies, and abandon progressively the fossil fuel dependence. Another energy generation trend called commonly the “Waste-to-Energy” solution, uses organic waste as a response for two major problems: energy generation and waste management. Thanks to the anaerobic digestion, the organic waste can provide a biogas composed essentially from Carbone dioxide (CO2 and Methane (CH4. This work aims essentially to help students, researchers and even decision makers to consider the importance of biogas generation. The proposed tool is the last version of our previous tool which is enhanced and completed. It presents the potential to produce biogas of any shortlisted kind of waste, including also some energy valorization ways. A technical economical data are introduced for eventual feasibility studies.

Management Tools

Science.gov (United States)

1987-01-01

Manugistics, Inc. (formerly AVYX, Inc.) has introduced a new programming language for IBM and IBM compatible computers called TREES-pls. It is a resource management tool originating from the space shuttle, that can be used in such applications as scheduling, resource allocation project control, information management, and artificial intelligence. Manugistics, Inc. was looking for a flexible tool that can be applied to many problems with minimal adaptation. Among the non-government markets are aerospace, other manufacturing, transportation, health care, food and beverage and professional services.

The RUBA Watchdog Video Analysis Tool

DEFF Research Database (Denmark)

Bahnsen, Chris Holmberg; Madsen, Tanja Kidholm Osmann; Jensen, Morten Bornø

We have developed a watchdog video analysis tool called RUBA (Road User Behaviour Analysis) to use for processing of traffic video. This report provides an overview of the functions of RUBA and gives a brief introduction into how analyses can be made in RUBA.......We have developed a watchdog video analysis tool called RUBA (Road User Behaviour Analysis) to use for processing of traffic video. This report provides an overview of the functions of RUBA and gives a brief introduction into how analyses can be made in RUBA....

Leveraging Big Data Tools and Technologies: Addressing the Challenges of the Water Quality Sector

Directory of Open Access Journals (Sweden)

Juan Manuel Ponce Romero

2017-11-01

Full Text Available The water utility sector is subject to stringent legislation, seeking to address both the evolution of practices within the chemical/pharmaceutical industry, and the safeguarding of environmental protection, and which is informed by stakeholder views. Growing public environmental awareness is balanced by fair apportionment of liability within-sector. This highly complex and dynamic context poses challenges for water utilities seeking to manage the diverse chemicals arising from disparate sources reaching Wastewater Treatment Plants, including residential, commercial, and industrial points of origin, and diffuse sources including agricultural and hard surface water run-off. Effluents contain broad ranges of organic and inorganic compounds, herbicides, pesticides, phosphorus, pharmaceuticals, and chemicals of emerging concern. These potential pollutants can be in dissolved form, or arise in association with organic matter, the associated risks posing significant environmental challenges. This paper examines how the adoption of new Big Data tools and computational technologies can offer great advantage to the water utility sector in addressing this challenge. Big Data approaches facilitate improved understanding and insight of these challenges, by industry, regulator, and public alike. We discuss how Big Data approaches can be used to improve the outputs of tools currently in use by the water industry, such as SAGIS (Source Apportionment GIS system, helping to reveal new relationships between chemicals, the environment, and human health, and in turn provide better understanding of contaminants in wastewater (origin, pathways, and persistence. We highlight how the sector can draw upon Big Data tools to add value to legacy datasets, such as the Chemicals Investigation Programme in the UK, combined with contemporary data sources, extending the lifespan of data, focusing monitoring strategies, and helping users adapt and plan more efficiently. Despite

A Partial Swot Analysis of the Turkish Bank Call Centers: The Actual and the Assumed Weaknesses

OpenAIRE

ÖZKAN, Ahmet Hakan

2014-01-01

The bank call centers of Turkey are seen as a tool of perceiving the threats and evaluating opportunities in the SWOT analysis. By the way they are evaluated as a factor of strength. However, the weaknesses of the call centers which must be taken into account in a SWOT analysis, are so various that they cannot be ignored. The weaknesses of the call centers are elaborated with this research. The ways the call centers harm the corporations or the ways they might harm are revised.

Final Report to the National Energy Technology Laboratory on FY09-FY13 Cooperative Research with the Consortium for Electric Reliability Technology Solutions

Energy Technology Data Exchange (ETDEWEB)

Vittal, Vijay [Arizona State Univ., Mesa, AZ (United States)

2015-11-04

The Consortium for Electric Reliability Technology Solutions (CERTS) was formed in 1999 in response to a call from U.S. Congress to restart a federal transmission reliability R&D program to address concerns about the reliability of the U.S. electric power grid. CERTS is a partnership between industry, universities, national laboratories, and government agencies. It researches, develops, and disseminates new methods, tools, and technologies to protect and enhance the reliability of the U.S. electric power system and the efficiency of competitive electricity markets. It is funded by the U.S. Department of Energy’s Office of Electricity Delivery and Energy Reliability (OE). This report provides an overview of PSERC and CERTS, of the overall objectives and scope of the research, a summary of the major research accomplishments, highlights of the work done under the various elements of the NETL cooperative agreement, and brief reports written by the PSERC researchers on their accomplishments, including research results, publications, and software tools.

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

Energy Technology Data Exchange (ETDEWEB)

Bill Stanley; Sandra Brown; Patrick Gonzalez; Zoe Kant; Gilberto Tiepolo; Wilber Sabido; Ellen Hawes; Jenny Henman; Miguel Calmon; Michael Ebinger

2004-07-10

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas impacts. The research described in this report occurred between July 1, 2002 and June 30, 2003. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: remote sensing for carbon analysis; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.

MbT-Tool: An open-access tool based on Thermodynamic Electron Equivalents Model to obtain microbial-metabolic reactions to be used in biotechnological process.

Science.gov (United States)

Araujo, Pablo Granda; Gras, Anna; Ginovart, Marta

2016-01-01

Modelling cellular metabolism is a strategic factor in investigating microbial behaviour and interactions, especially for bio-technological processes. A key factor for modelling microbial activity is the calculation of nutrient amounts and products generated as a result of the microbial metabolism. Representing metabolic pathways through balanced reactions is a complex and time-consuming task for biologists, ecologists, modellers and engineers. A new computational tool to represent microbial pathways through microbial metabolic reactions (MMRs) using the approach of the Thermodynamic Electron Equivalents Model has been designed and implemented in the open-access framework NetLogo. This computational tool, called MbT-Tool (Metabolism based on Thermodynamics) can write MMRs for different microbial functional groups, such as aerobic heterotrophs, nitrifiers, denitrifiers, methanogens, sulphate reducers, sulphide oxidizers and fermenters. The MbT-Tool's code contains eighteen organic and twenty inorganic reduction-half-reactions, four N-sources (NH4 (+), NO3 (-), NO2 (-), N2) to biomass synthesis and twenty-four microbial empirical formulas, one of which can be determined by the user (CnHaObNc). MbT-Tool is an open-source program capable of writing MMRs based on thermodynamic concepts, which are applicable in a wide range of academic research interested in designing, optimizing and modelling microbial activity without any extensive chemical, microbiological and programing experience.

75 FR 3203 - National Medal of Technology and Innovation Call for 2010 Nominations

Science.gov (United States)

2010-01-20

... outstanding, lasting contribution to the economy through the promotion of technology or technological manpower... contributions to the promotion of technology or technological manpower for the improvement of the economic... highlights the national importance of fostering technological innovation based upon solid science, resulting...

Engineering and Ingenuity, Tools and Technologies (1)

DEFF Research Database (Denmark)

Jensen, Jørgen Juncher; Ravn, Erik Sonne; Guarin, Luis

2007-01-01

Risk-based ship design demands advanced tools to predict the safety performance of a given design. Such tools have been developed or refined in the SAFEDOR project covering • Fast and accurate flooding prediction • Probabilistic assessment of the strength of ship structures • Probabilistic...... assessment of intact stability • Prevention of collision and grounding events • Prevention of fire and explosion events Various procedures have been used to derive the tools: Bayesian network, artificial neural networks, CFD calculations, non-linear time domain calculations and reliability models...... with tools for fast and reliable evaluation of various risks associated with failure of the ship or its subsystems and able to evaluate the effect of various risk-control options. Examples will be given within prevention of collision, grounding and fire events....

Novel Smart Glove Technology as a Biomechanical Monitoring Tool

Directory of Open Access Journals (Sweden)

Brendan O’FLYNN

2015-10-01

Full Text Available Developments in Virtual Reality (VR technology and its overall market have been occurring since the 1960s when Ivan Sutherland created the world’s first tracked head-mounted display (HMD – a goggle type head gear. In society today, consumers are expecting a more immersive experience and associated tools to bridge the cyber-physical divide. This paper presents the development of a next generation smart glove microsystem to facilitate Human Computer Interaction through the integration of sensors, processors and wireless technology. The objective of the glove is to measure the range of hand joint movements, in real time and empirically in a quantitative manner. This includes accurate measurement of flexion, extension, adduction and abduction of the metacarpophalangeal (MCP, Proximal interphalangeal (PIP and Distal interphalangeal (DIP joints of the fingers and thumb in degrees, together with thumb-index web space movement. This system enables full real-time monitoring of complex hand movements. Commercially available gloves are not fitted with sufficient sensors for full data capture, and require calibration for each glove wearer. Unlike these current state-of-the-art data gloves, the UU / Tyndall Inertial Measurement Unit (IMU glove uses a combination of novel stretchable substrate material and 9 degree of freedom (DOF inertial sensors in conjunction with complex data analytics to detect joint movement. Our novel IMU data glove requires minimal calibration and is therefore particularly suited to multiple application domains such as Human Computer interfacing, Virtual reality, the healthcare environment..

Designing Health Information Technology Tools to Prevent Gaps in Public Health Insurance.

Science.gov (United States)

Hall, Jennifer D; Harding, Rose L; DeVoe, Jennifer E; Gold, Rachel; Angier, Heather; Sumic, Aleksandra; Nelson, Christine A; Likumahuwa-Ackman, Sonja; Cohen, Deborah J

2017-06-23

Changes in health insurance policies have increased coverage opportunities, but enrollees are required to annually reapply for benefits which, if not managed appropriately, can lead to insurance gaps. Electronic health records (EHRs) can automate processes for assisting patients with health insurance enrollment and re-enrollment. We describe community health centers' (CHC) workflow, documentation, and tracking needs for assisting families with insurance application processes, and the health information technology (IT) tool components that were developed to meet those needs. We conducted a qualitative study using semi-structured interviews and observation of clinic operations and insurance application assistance processes. Data were analyzed using a grounded theory approach. We diagramed workflows and shared information with a team of developers who built the EHR-based tools. Four steps to the insurance assistance workflow were common among CHCs: 1) Identifying patients for public health insurance application assistance; 2) Completing and submitting the public health insurance application when clinic staff met with patients to collect requisite information and helped them apply for benefits; 3) Tracking public health insurance approval to monitor for decisions; and 4) assisting with annual health insurance reapplication. We developed EHR-based tools to support clinical staff with each of these steps. CHCs are uniquely positioned to help patients and families with public health insurance applications. CHCs have invested in staff to assist patients with insurance applications and help prevent coverage gaps. To best assist patients and to foster efficiency, EHR based insurance tools need comprehensive, timely, and accurate health insurance information.

How Our Cognition Shapes and Is Shaped by Technology: A Common Framework for Understanding Human Tool-Use Interactions in the Past, Present, and Future

Directory of Open Access Journals (Sweden)

François Osiurak

2018-03-01

Full Text Available Over the evolution, humans have constantly developed and improved their technologies. This evolution began with the use of physical tools, those tools that increase our sensorimotor abilities (e.g., first stone tools, modern knives, hammers, pencils. Although we still use some of these tools, we also employ in daily life more sophisticated tools for which we do not systematically understand the underlying physical principles (e.g., computers, cars. Current research is also turned toward the development of brain–computer interfaces directly linking our brain activity to machines (i.e., symbiotic tools. The ultimate goal of research on this topic is to identify the key cognitive processes involved in these different modes of interaction. As a primary step to fulfill this goal, we offer a first attempt at a common framework, based on the idea that humans shape technologies, which also shape us in return. The framework proposed is organized into three levels, describing how we interact when using physical (Past, sophisticated (Present, and symbiotic (Future technologies. Here we emphasize the role played by technical reasoning and practical reasoning, two key cognitive processes that could nevertheless be progressively suppressed by the proficient use of sophisticated and symbiotic tools. We hope that this framework will provide a common ground for researchers interested in the cognitive basis of human tool-use interactions, from paleoanthropology to neuroergonomics.

Quantifying traces of tool use: a novel morphometric analysis of damage patterns on percussive tools.

Directory of Open Access Journals (Sweden)

Matthew V Caruana

Full Text Available Percussive technology continues to play an increasingly important role in understanding the evolution of tool use. Comparing the archaeological record with extractive foraging behaviors in nonhuman primates has focused on percussive implements as a key to investigating the origins of lithic technology. Despite this, archaeological approaches towards percussive tools have been obscured by a lack of standardized methodologies. Central to this issue have been the use of qualitative, non-diagnostic techniques to identify percussive tools from archaeological contexts. Here we describe a new morphometric method for distinguishing anthropogenically-generated damage patterns on percussive tools from naturally damaged river cobbles. We employ a geomatic approach through the use of three-dimensional scanning and geographical information systems software to statistically quantify the identification process in percussive technology research. This will strengthen current technological analyses of percussive tools in archaeological frameworks and open new avenues for translating behavioral inferences of early hominins from percussive damage patterns.

Quantifying Traces of Tool Use: A Novel Morphometric Analysis of Damage Patterns on Percussive Tools

Science.gov (United States)

Caruana, Matthew V.; Carvalho, Susana; Braun, David R.; Presnyakova, Darya; Haslam, Michael; Archer, Will; Bobe, Rene; Harris, John W. K.

2014-01-01

Percussive technology continues to play an increasingly important role in understanding the evolution of tool use. Comparing the archaeological record with extractive foraging behaviors in nonhuman primates has focused on percussive implements as a key to investigating the origins of lithic technology. Despite this, archaeological approaches towards percussive tools have been obscured by a lack of standardized methodologies. Central to this issue have been the use of qualitative, non-diagnostic techniques to identify percussive tools from archaeological contexts. Here we describe a new morphometric method for distinguishing anthropogenically-generated damage patterns on percussive tools from naturally damaged river cobbles. We employ a geomatic approach through the use of three-dimensional scanning and geographical information systems software to statistically quantify the identification process in percussive technology research. This will strengthen current technological analyses of percussive tools in archaeological frameworks and open new avenues for translating behavioral inferences of early hominins from percussive damage patterns. PMID:25415303

New tools and technologies to manage operational data and help in decision-making concerning shoreline pollution

International Nuclear Information System (INIS)

Gouriou, V.; Quintin, K.; Legrand, S.; Mazurier, A.; Le Junter, Y.; Gicquel, M.

2006-01-01

This paper addressed the issue of effectively collecting and organizing all data related to an oil spill. It referred to lessons learned from the Erika and Prestige oil spills which polluted the French coastal waters. A user-friendly tool for data management and storage for shoreline pollution was developed following the 2 incidents. The tool was developed under the auspices of the Argepol project and has helped response teams and decision-makers use web technologies and interactive cartography to access, capture and make use of data about shoreline landings, collected waste, disposed waste, manpower, equipment requirements, evolution of the spill and cleaning. The tool has allowed maximum flexibility regarding connections and possible adaptations to other systems, particularly foreign ones. A prototype was tested and validated by simulating an exercise involving the marine pollution (POLMAR) response teams. The tool allows users to create and edit geographical information online, modify databases and shore information using a web browser. Improvements are still in progress and regular updates are scheduled in order to keep the tool in use for the long term. 11 refs., 6 figs

Open Health Tools: Tooling for Interoperable Healthcare

Directory of Open Access Journals (Sweden)

Skip McGaughey

2008-11-01

Full Text Available The Open Health Tools initiative is creating an ecosystem focused on the production of software tooling that promotes the exchange of medical information across political, geographic, cultural, product, and technology lines. At its core, OHT believes that the availability of high-quality tooling that interoperates will propel the industry forward, enabling organizations and vendors to build products and systems that effectively work together. This will ?raise the interoperability bar? as a result of having tools that just work. To achieve these lofty goals, careful consideration must be made to the constituencies that will be most affected by an OHT-influenced world. This document outlines a vision of OHT?s impact to these stakeholders. It does not explain the OHT process itself or how the OHT community operates. Instead, we place emphasis on the impact of that process within the health industry. The catchphrase ?code is king? underpins this document, meaning that the manifestation of any open source community lies in the products and technology it produces.

Dynamic call center routing policies using call waiting and agent idle times

NARCIS (Netherlands)

Chan, W.; Koole, G.M.; L'Ecuyer, P.

2014-01-01

We study call routing policies for call centers with multiple call types and multiple agent groups. We introduce new weight-based routing policies where each pair (call type, agent group) is given a matching priority defined as an affine combination of the longest waiting time for that call type and

Effects of Educational Blogging on Perceptions of Science and Technology Education Students toward Web as a Learning Tool

Directory of Open Access Journals (Sweden)

Erkan Tekinarslan

2012-06-01

Full Text Available The purpose of this study is to investigate effects of educational blogging on perceptions (e.g., attitude, self-efficacy of undergraduate students in Science and Technology Education program toward Web as a learning tool. In addition, this study examines opinions of the Science and Technology Education students about contribution of educational blogging to the students’ perceptions toward Web as a learning tool, knowledge in the field, and advantages and disadvantages of educational blogging. The methodological frame of this study is based on both one group pre-test and post-test design, and qualitative approaches including observations, interviews and document analyses. A total of 32 undergraduate students voluntarily participated in the pre-test and post-test sections, and 25 students participated in the interviews. The findings indicate that educational blogging have positive effects over the students’ attitudes on the usability, selfefficacy, affective and Web-based learning subscales. In addition, the qualitative findings reveal positive contributions of educational blogging to the students’ knowledge in the field, and to the perceptions and thoughts of the students toward Web as a learning tool

THE ISSUE OF FORMING FUTURE MUSIC TEACHERS’ PROFESSIONAL COMPETENCE BY COMPUTER TECHNOLOGY TOOLS IN THE THEORY OF NATIONAL ART

Directory of Open Access Journals (Sweden)

Lyudmila Gavrilova

2017-04-01

Full Text Available The article deals with theoretical aspects of forming future music teachers’ professional competence by computer technology tools. The concept of professional competence has become a major criterion of preparing students for professional activities. The issue of the article is relevant as the competence approach has become a basis of implementing computer technologies into future music teachers’ training. The authors give a detailed analysis of implementing computer technologies into musical education. The special attention is paid to using a computer in musical education and making electronic pedagogical resources. The aim of the article is to outline the directions of national art research in the process of implementing computer tools that is one of the most efficient ways of updating process of future music teachers’ training. The article reveals theoretical aspects of forming future music teachers’ professional competence by computer technology tools. The authors point out that implementing musical and computer technologies into music art practice is realized in some directions: using a computer as a new musical instrument in composers, sound engineers, and arrangers’ activities; using a computer for studying the quality of music sound, analysing sounds and music compositions, spectral analysis of acoustic characteristics of singers’ voice; studying ancient music manuscripts due to digital technology; developing hardware and software for music education. A distinct direction of research is the pedagogical aspect of using a computer in music education (music and the use of special software for recording and editing music, the use of multimedia to enhance visibility in education, development of e-learning resources, etc.. The authors conclude that implementing computer technologies into future music teachers’ training makes this process more efficient. In the authors’ opinion the widespread introduction of distance learning

Enabling Problem Based Learning through Web 2.0 Technologies

DEFF Research Database (Denmark)

Tambouris, Efthimios; Panopoulou, Eleni; Tarabanis, Konstantinos

2012-01-01

of modern educational systems. Established pedagogical strategies, such as Problem Based Learning (PBL), are being adapted for online use in conjunction with modern Web 2.0 technologies and tools. However, even though Web 2.0 and progressive social-networking technologies are automatically associated......Advances in Information and Communications Technology (ICT), particularly the so-called Web 2.0, are affecting all aspects of our life: how we communicate, how we shop, how we socialise, and how we learn. Facilitating learning through the use of ICT, also known as eLearning, is a vital part...... with ideals such as collaboration, sharing, and active learning, it is also possible to use them in a very conservative, teacher-centred way limiting thus their impact. In this paper, we present a PBL 2.0 framework, i.e., a framework combining PBL practices with Web 2.0 technologies. More specifically, we (a...

Advanced computational tools and methods for nuclear analyses of fusion technology systems

International Nuclear Information System (INIS)

Fischer, U.; Chen, Y.; Pereslavtsev, P.; Simakov, S.P.; Tsige-Tamirat, H.; Loughlin, M.; Perel, R.L.; Petrizzi, L.; Tautges, T.J.; Wilson, P.P.H.

2005-01-01

An overview is presented of advanced computational tools and methods developed recently for nuclear analyses of Fusion Technology systems such as the experimental device ITER ('International Thermonuclear Experimental Reactor') and the intense neutron source IFMIF ('International Fusion Material Irradiation Facility'). These include Monte Carlo based computational schemes for the calculation of three-dimensional shut-down dose rate distributions, methods, codes and interfaces for the use of CAD geometry models in Monte Carlo transport calculations, algorithms for Monte Carlo based sensitivity/uncertainty calculations, as well as computational techniques and data for IFMIF neutronics and activation calculations. (author)

A new web-based tool for data visualization in MDSplus

Energy Technology Data Exchange (ETDEWEB)

Manduchi, G., E-mail: gabriele.manduchi@igi.cnr.it [Consorzio RFX, Euratom-ENEA Association, Corso Stati Uniti 4, Padova 35127 (Italy); Fredian, T.; Stillerman, J. [Massachusetts Institute of Technology, 175 Albany Street, Cambridge, MA 02139 (United States)

2014-05-15

Highlights: • The paper describes a new web-based data visualization tool for MDSplus. • It describes the experience gained with the previous data visualization tools. • It describes the used technologies for web data access and visualization. • It describes the current architecture of the tool and the new foreseen features. - Abstract: The Java tool jScope has been widely used for years to display acquired waveform in MDSplus. The choice of the Java programming language for its implementation has been successful for several reasons among which the fact that Java supports a multiplatform environment and it is well suited for graphics and the management of network communication. jScope can be used both as a local and remote application. In the latter case, data are acquired via TCP/IP communication using the mdsip protocol. Exporting data in this way however introduces several security problems due to the necessity of opening firewall holes for the user ports. For this reason, and also due to the fact that JavaScript is becoming a widely used language for web applications, a new tool written in JavaScript and called WebScope has been developed for the visualization of MDSplus data in web browsers. Data communication is now achieved via http protocol using Asynchronous JavaScript and XML (AJAX) technology. At the server side, data access is carried out by a Python module that interacts with the web server via Web Server Gateway Interface (WSGI). When a data item, described by an MDSplus expression, is requested by the web browser for visualization, it is returned as a binary message and then handled by callback JavaScript functions activated by the web browser. Scalable Vector Graphics (SVG) technology is used to handle graphics within the web browser and to carry out the same interactive data visualization provided by jScope. In addition to mouse events, touch events are supported to provide interactivity also on touch screens. In this way, waveforms can be

A new web-based tool for data visualization in MDSplus

International Nuclear Information System (INIS)

Manduchi, G.; Fredian, T.; Stillerman, J.

2014-01-01

Highlights: • The paper describes a new web-based data visualization tool for MDSplus. • It describes the experience gained with the previous data visualization tools. • It describes the used technologies for web data access and visualization. • It describes the current architecture of the tool and the new foreseen features. - Abstract: The Java tool jScope has been widely used for years to display acquired waveform in MDSplus. The choice of the Java programming language for its implementation has been successful for several reasons among which the fact that Java supports a multiplatform environment and it is well suited for graphics and the management of network communication. jScope can be used both as a local and remote application. In the latter case, data are acquired via TCP/IP communication using the mdsip protocol. Exporting data in this way however introduces several security problems due to the necessity of opening firewall holes for the user ports. For this reason, and also due to the fact that JavaScript is becoming a widely used language for web applications, a new tool written in JavaScript and called WebScope has been developed for the visualization of MDSplus data in web browsers. Data communication is now achieved via http protocol using Asynchronous JavaScript and XML (AJAX) technology. At the server side, data access is carried out by a Python module that interacts with the web server via Web Server Gateway Interface (WSGI). When a data item, described by an MDSplus expression, is requested by the web browser for visualization, it is returned as a binary message and then handled by callback JavaScript functions activated by the web browser. Scalable Vector Graphics (SVG) technology is used to handle graphics within the web browser and to carry out the same interactive data visualization provided by jScope. In addition to mouse events, touch events are supported to provide interactivity also on touch screens. In this way, waveforms can be

Information and Communication Technologies as Agricultural Extension Tools: A Survey among Farmers in West Macedonia, Greece

Science.gov (United States)

Anastasios, Michailidis; Koutsouris, Alex; Konstadinos, Mattas

2010-01-01

This article critically assesses the potential of information and communication technologies (ICTs) as agricultural extension tools. Specifically, the purpose of the current piece of work is to identify the extent of the use of ICTs on farms, look into farmers' characteristics as related to ICTs' adoption and explore farmers' preferred extension…

Terminal Area Conflict Detection and Resolution Tool

Science.gov (United States)

Verma, Savita Arora

2011-01-01

This poster will describe analysis of a conflict detection and resolution tool for the terminal area called T-TSAFE. With altitude clearance information, the tool can reduce false alerts to as low as 2 per hour.

Analysis of Drop Call Probability in Well Established Cellular ...

African Journals Online (AJOL)

Technology in Africa has increased over the past decade. The increase in modern cellular networks requires stringent quality of service (QoS). Drop call probability is one of the most important indices of QoS evaluation in a large scale well-established cellular network. In this work we started from an accurate statistical ...

Cell Phone Calls in the Operating Theater and Staff Distractions: An Observational Study.

Science.gov (United States)

Avidan, Alexander; Yacobi, Galel; Weissman, Charles; Levin, Phillip D

2017-01-09

Cell phones are the primary communication tool in our institution. There are no restrictions on their use in the operating rooms. The goal of this study was to evaluate the extent of cell phone use in the operating rooms during elective surgery and to evaluate whether they cause staff distractions. The following data on cell phone use were recorded anonymously: number of incoming and outgoing cell phone calls, duration of cell phone calls and their content (patient related, work related, private), who was distracted by the cell phone calls, and duration of distractions. We made observations during 52 surgeries. There were 205 cell phone calls, 197 (96.1%; median, 3 per surgery; interquartile range, 2-5) incoming and 8 (3.9%) outgoing. Incoming calls were answered on 110 (55.8%) of 197 (median, 2; interquartile range, 1-3) occasions. The mean duration of incoming calls (64 ± 40 seconds) was shorter than those of the outgoing calls (137 ± 242 seconds, P cell phone calls in the operating rooms during elective surgery was lower than expected and caused short-lived distractions mainly to the operating surgeons. We recommend that operating surgeons turn off their cell phones before surgery.

Teaching Strategies to Apply in the Use of Technological Tools in Technical Education

Directory of Open Access Journals (Sweden)

Olga Arranz García

2014-09-01

Full Text Available The emergence of new technologies in education area is changing the way of organizing the educational processes. Teachers are not unrelated to these changes and must employ new strategies to adapt their teaching methods to the new circumstances. One of these adaptations is framed in the virtual learning, where the learning management systems have been revealed as a very effective means within the learning process. In this paper we try to provide teachers in engineering schools how to use in an appropriate way the different technological tools that are present in a virtual platform. Thus, in the experimental framework we show the results outcomes in the analysis of two data samples obtained before and after the implementation of the European Higher Education Area, that would be extrapolated for its innovative application to the learning techniques.

[Dietopro.com: a new tool for dietotherapeutical management based on cloud computing technology].

Science.gov (United States)

García, Candido Gabriel; Sebastià, Natividad; Blasco, Esther; Soriano, José Miguel

2014-09-01

dietotherapeutical softwares are now a basic tool in the dietary management of patients, either from a physiological point of view and / or pathological. New technologies and research in this regard, have favored the emergence of new applications for the dietary and nutritional management that facilitate the management of the dietotherapeutical company. To comparatively study the main dietotherapeutical applications on the market to give criteria to the professional users of diet and nutrition in the selection of one of the main tools for these. Dietopro.com is, from our point of view, one of the most comprehensive management of patients dietotherapeutical applications. Based on the need of the user, it has different dietary sofwares choice.We conclude that there is no better or worse than another application, but applications roughly adapted to the needs of professionals. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

FFI: A software tool for ecological monitoring

Science.gov (United States)

Duncan C. Lutes; Nathan C. Benson; MaryBeth Keifer; John F. Caratti; S. Austin Streetman

2009-01-01

A new monitoring tool called FFI (FEAT/FIREMON Integrated) has been developed to assist managers with collection, storage and analysis of ecological information. The tool was developed through the complementary integration of two fire effects monitoring systems commonly used in the United States: FIREMON and the Fire Ecology Assessment Tool. FFI provides software...

Call for civil registration and vital statistics systems experts | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

2017-06-30

Jun 30, 2017 ... This is a call for experts in civil registration, information technology, public health, statistics, law, ... digitization (including IT systems design, and system integration and ... socio-cultural and anthropological research); and; public health. ... IDRC and key partners will showcase critical work on adaptation and ...

Emerging Instructional Technologies: Exploring the Extent of Faculty Use of Web 2.0 Tools at a Midwestern Community College

Science.gov (United States)

Daher, Tareq; Lazarevic, Bojan

2014-01-01

The purpose of this research is to provide insight into the several aspects of instructional use of emerging web-based technologies. The study first explores the extent of Web 2.0 technology integration into face-to-face classroom activities. In this phase, the main focus of research interests was on the types and dynamics of Web 2.0 tools used by…

Cross-tools and cross-media effects

NARCIS (Netherlands)

Voorveld, H.

2013-01-01

Effects of persuasive messages depend on the content of the message itself and on the media or tools that deliver the persuasive messages. Nowadays almost all campaigns make use of multiple media or multiple promotional tools. Therefore, it is important to study so-called cross-media (or

Tools for collaborative decision-making

CERN Document Server

Zaraté, Pascale

2013-01-01

Decision-making has evolved recently thanks to the introduction of information and communication technologies in many organizations, which has led to new kinds of decision-making processes, called "collaborative decision-making", at the organizational and cognitive levels. This book looks at the development of the decision-making process in organizations. Decision-aiding and its paradigm of problem solving are defined, showing how decision-makers now need to work in a cooperative way. Definitions of cooperation and associated concepts such as collaboration and coordination are given and a framework of cooperative decision support systems is presented, including intelligent DSS, cooperative knowledge-based systems, workflow, group support systems, collaborative engineering, integrating with a collaborative decision-making model in part or being part of global projects. Several models and experimental studies are also included showing that these new processes have to be supported by new types of tools, several ...

Voice over IP phone calls from your smartphone

CERN Multimedia

2014-01-01

All CERN users do have a Lync account (see here) and can use Instant Messaging, presence and other features. In addition, if your number is activated on Lync IP Phone(1) system then you can make standard phone calls from your computer (Windows/Mac).   Recently, we upgraded the infrastructure to Lync 2013. One of the major features is the possibility to make Voice over IP phone calls from a smartphone using your CERN standard phone number (not mobile!). Install Lync 2013 on iPhone/iPad, Android or Windows Phone, connect to WiFi network and make phone calls as if you were in your office. There will be no roaming charges because you will be using WiFi to connect to CERN phone system(2). Register here to the presentation on Tuesday 29 April at 11 a.m. in the Technical Training Center and see the most exciting features of Lync 2013.   Looking forward to seeing you! The Lync team (1) How to register on Lync IP Phone system: http://information-technology.web.cern.ch/book/lync-ip-phone-serv...

New tools, technology and techniques applied in geological sciences: current situation and future perspectives

International Nuclear Information System (INIS)

Ulloa, Andres

2014-01-01

Technological tools and work methodologies most used in the area of geological sciences are reviewed and described. The various electronic devices such as laptops, palmtops or PDA (personal digital assistant), tablets and smartphones have allowed to take field geological data and store them efficiently. Tablets and smartphones have been convenient for data collection of scientific data by the diversity of sensors that present, portability, autonomy and the possibility to install specific applications. High precision GPS in conjunction with LIDAR technology and sonar technology have been more accessible and used for geological research, generating high resolution three-dimensional models to complement geological studies. Remote sensing techniques such as high penetration radar are used to perform models of the ice thickness and topography in Antarctic. Modern three-dimensional scanning and printing techniques are used in geological science research and teaching. Currently, the advance in the computer technology has allowed to handle three-dimensional models on personal computers efficiently way and with different display options. Some, of the new areas of geology, emerged recently, are mentioned to generate a broad panorama toward where can direct geological researches in the next years [es

Unmanned aircraft systems in wildlife research: Current and future applications of a transformative technology

Science.gov (United States)

Christie, Katherine S.; Gilbert, Sophie L.; Brown, Casey L.; Hatfield, Michael; Hanson, Leanne

2016-01-01

Unmanned aircraft systems (UAS) – also called unmanned aerial vehicles (UAVs) or drones – are an emerging tool that may provide a safer, more cost-effective, and quieter alternative to traditional research methods. We review examples where UAS have been used to document wildlife abundance, behavior, and habitat, and illustrate the strengths and weaknesses of this technology with two case studies. We summarize research on behavioral responses of wildlife to UAS, and discuss the need to understand how recreational and commercial applications of this technology could disturb certain species. Currently, the widespread implementation of UAS by scientists is limited by flight range, regulatory frameworks, and a lack of validation. UAS are most effective when used to examine smaller areas close to their launch sites, whereas manned aircraft are recommended for surveying greater distances. The growing demand for UAS in research and industry is driving rapid regulatory and technological progress, which in turn will make them more accessible and effective as analytical tools.

OccuPeak: ChIP-Seq peak calling based on internal background modelling

NARCIS (Netherlands)

de Boer, Bouke A.; van Duijvenboden, Karel; van den Boogaard, Malou; Christoffels, Vincent M.; Barnett, Phil; Ruijter, Jan M.

2014-01-01

ChIP-seq has become a major tool for the genome-wide identification of transcription factor binding or histone modification sites. Most peak-calling algorithms require input control datasets to model the occurrence of background reads to account for local sequencing and GC bias. However, the

Earthing Technology

NARCIS (Netherlands)

Blok, Vincent

2017-01-01

In this article, we reflect on the conditions under which new technologies emerge in the Anthropocene and raise the question of how to conceptualize sustainable technologies therein. To this end, we explore an eco-centric approach to technology development, called biomimicry. We discuss opposing

Access to Mobile Communication Technology and Willingness to Participate in Automated Telemedicine Calls Among Chronically Ill Patients in Honduras

Science.gov (United States)

Mendoza-Avelares, Milton O.; Milton, Evan C.; Lange, Ilta; Fajardo, Roosevelt

2010-01-01

Abstract Objectives: Patients in underdeveloped countries may be left behind by advances in telehealthcare. We surveyed chronically ill patients with low incomes in Honduras to measure their use of mobile technologies and willingness to participate in mobile disease management support. Materials and Methods: 624 chronically ill primary care patients in Honduras were surveyed. We examined variation in telephone access across groups defined by patients' sociodemographic characteristics, diagnoses, and access to care. Logistic regression was used to identify independent correlates of patients' interest in automated telephonic support for disease management. Results: Participants had limited education (mean 4.8 years), and 65% were unemployed. Eighty-four percent had telephone access, and 78% had cell phones. Most respondents had voicemail (61%) and text messaging (58%). Mobile technologies were particularly common among patients who had to forego clinic visits and medications due to cost concerns (each p 80%) reported that they would be willing to receive automated calls focused on appointment reminders, medication adherence, health status monitoring, and self-care education. Patients were more likely to be willing to participate in automated telemedicine services if they had to cancel a clinic appointment due to transportation problems or forego medication due to cost pressures. Conclusions: Even in this poor region of Honduras, most chronically ill patients have access to mobile technology, and most are willing to participate in automated telephone disease management support. Given barriers to in-person care, new models of mobile healthcare should be developed for chronically ill patients in developing countries. PMID:21062234

USING RF TECHNOLOGY FOR PROTECTED ASSET TRACKING

International Nuclear Information System (INIS)

Younkin, James R.; Pickett, Chris A.; Richardson, Dave; Stinson, Brad J.

2008-01-01

The Oak Ridge National Laboratory (ORNL) is working on systems that use a new radio frequency (RF) technology called Rubee to manage and inventory many types of protected assets, including weapons housed in Department of Energy (DOE) armories, tooling, and nuclear material containers. Rubee is being considered for an IEEE Standard, and is used on several projects at ORNL because of its high performance when used in, on, and around metal-an environment that is typical of that found in an armory vault and that of many other protected assets locations within nuclear facilities. The primary objective using Rubee is to supply sustainable technology that provides timely information on the status and location of protected assets. This paper focuses on the results from a deployment of this technology at a DOE armory and discusses the applicability of Rubee for use with other protected assets within nuclear facilities. Key Words: Rubee, low radio frequency, protected assets

The primary assessment tool at Philips electronics : capturing real options and organizational risk in technology portfolio management

NARCIS (Netherlands)

Lint, L.J.O.

2000-01-01

I develop an extended scoring approach to build a balanced portfolio of new technology projects under uncertainty at early stages of development. My contribution is twofold. First, I show how the tool incorporates the option approach to decision making to create contingent claims on future market

Current Research on Containment Technologies for Verification Activities: Advanced Tools for Maintaining Continuity of Knowledge

International Nuclear Information System (INIS)

Smartt, H.; Kuhn, M.; Krementz, D.

2015-01-01

The U.S. National Nuclear Security Administration (NNSA) Office of Non-proliferation and Verification Research and Development currently funds research on advanced containment technologies to support Continuity of Knowledge (CoK) objectives for verification regimes. One effort in this area is the Advanced Tools for Maintaining Continuity of Knowledge (ATCK) project. Recognizing that CoK assurances must withstand potential threats from sophisticated adversaries, and that containment options must therefore keep pace with technology advances, the NNSA research and development on advanced containment tools is an important investment. The two ATCK efforts underway at present address the technical containment requirements for securing access points (loop seals) and protecting defined volumes. Multiple U.S. national laboratories are supporting this project: Sandia National Laboratories (SNL), Savannah River National Laboratory (SRNL), and Oak Ridge National Laboratory (ORNL). SNL and SRNL are developing the ''Ceramic Seal,'' an active loop seal that integrates multiple advanced security capabilities and improved efficiency housed within a small-volume ceramic body. The development includes an associated handheld reader and interface software. Currently at the prototype stage, the Ceramic Seal will undergo a series of tests to determine operational readiness. It will be field tested in a representative verification trial in 2016. ORNL is developing the Whole Volume Containment Seal (WCS), a flexible conductive fabric capable of enclosing various sizes and shapes of monitored items. The WCS includes a distributed impedance measurement system for imaging the fabric surface area and passive tamper-indicating features such as permanent-staining conductive ink. With the expected technology advances from the Ceramic Seal and WCS, the ATCK project takes significant steps in advancing containment technologies to help maintain CoK for various verification

Geospatial Technology: A Tool to Aid in the Elimination of Malaria in Bangladesh

Directory of Open Access Journals (Sweden)

Karen E. Kirk

2014-12-01

Full Text Available Bangladesh is a malaria endemic country. There are 13 districts in the country bordering India and Myanmar that are at risk of malaria. The majority of malaria morbidity and mortality cases are in the Chittagong Hill Tracts, the mountainous southeastern region of Bangladesh. In recent years, malaria burden has declined in the country. In this study, we reviewed and summarized published data (through 2014 on the use of geospatial technologies on malaria epidemiology in Bangladesh and outlined potential contributions of geospatial technologies for eliminating malaria in the country. We completed a literature review using “malaria, Bangladesh” search terms and found 218 articles published in peer-reviewed journals listed in PubMed. After a detailed review, 201 articles were excluded because they did not meet our inclusion criteria, 17 articles were selected for final evaluation. Published studies indicated geospatial technologies tools (Geographic Information System, Global Positioning System, and Remote Sensing were used to determine vector-breeding sites, land cover classification, accessibility to health facility, treatment seeking behaviors, and risk mapping at the household, regional, and national levels in Bangladesh. To achieve the goal of malaria elimination in Bangladesh, we concluded that further research using geospatial technologies should be integrated into the country’s ongoing surveillance system to identify and better assess progress towards malaria elimination.

47 CFR 22.921 - 911 call processing procedures; 911-only calling mode.

Science.gov (United States)

2010-10-01

... programming in the mobile unit that determines the handling of a non-911 call and permit the call to be... CARRIER SERVICES PUBLIC MOBILE SERVICES Cellular Radiotelephone Service § 22.921 911 call processing procedures; 911-only calling mode. Mobile telephones manufactured after February 13, 2000 that are capable of...

Student Teachers and CALL: Personal and Pedagogical Uses and Beliefs

Science.gov (United States)

Hlas, Anne Cummings; Conroy, Kelly; Hildebrandt, Susan A.

2017-01-01

The student teaching semester affords teacher candidates the chance to apply what they have learned during their teacher preparation coursework. Therefore, it can be a prime opportunity for student teachers to use technology for their own language learning and to implement computer assisted language learning (CALL) in their instruction. This study…

SBOAT: A Stochastic BPMN Analysis and Optimisation Tool

DEFF Research Database (Denmark)

Herbert, Luke Thomas; Hansen, Zaza Nadja Lee; Jacobsen, Peter

2014-01-01

In this paper we present a description of a tool development framework, called SBOAT, for the quantitative analysis of graph based process modelling languages based upon the Business Process Modelling and Notation (BPMN) language, extended with intention preserving stochastic branching and parame......In this paper we present a description of a tool development framework, called SBOAT, for the quantitative analysis of graph based process modelling languages based upon the Business Process Modelling and Notation (BPMN) language, extended with intention preserving stochastic branching...

A Proposal to Develop Interactive Classification Technology

Science.gov (United States)

deBessonet, Cary

1998-01-01

Research for the first year was oriented towards: 1) the design of an interactive classification tool (ICT); and 2) the development of an appropriate theory of inference for use in ICT technology. The general objective was to develop a theory of classification that could accommodate a diverse array of objects, including events and their constituent objects. Throughout this report, the term "object" is to be interpreted in a broad sense to cover any kind of object, including living beings, non-living physical things, events, even ideas and concepts. The idea was to produce a theory that could serve as the uniting fabric of a base technology capable of being implemented in a variety of automated systems. The decision was made to employ two technologies under development by the principal investigator, namely, SMS (Symbolic Manipulation System) and SL (Symbolic Language) [see debessonet, 1991, for detailed descriptions of SMS and SL]. The plan was to enhance and modify these technologies for use in an ICT environment. As a means of giving focus and direction to the proposed research, the investigators decided to design an interactive, classificatory tool for use in building accessible knowledge bases for selected domains. Accordingly, the proposed research was divisible into tasks that included: 1) the design of technology for classifying domain objects and for building knowledge bases from the results automatically; 2) the development of a scheme of inference capable of drawing upon previously processed classificatory schemes and knowledge bases; and 3) the design of a query/ search module for accessing the knowledge bases built by the inclusive system. The interactive tool for classifying domain objects was to be designed initially for textual corpora with a view to having the technology eventually be used in robots to build sentential knowledge bases that would be supported by inference engines specially designed for the natural or man-made environments in which the

Embedding Java Types in CPN Tools

DEFF Research Database (Denmark)

Lassen, Kristian Bisgaard; Westergaard, Michael

the modeller to call methods on Java ob jects. This paper is about how the stub code is generated, i.e., representing Java classes to Standard ML to be able to call Java code in the CPN models, and how the BRITNeY Suite framework handles the invocations of the stub code. The contribution of this paper is give......CPN Tools is a well known editor for Colored Petri nets (CPNs) that is capable of doing state space and performance analysis. The BRITNeY Suite has added yet another feature to CPN Tools for integrating CPN models with Java programs, by providing stubs accessible from the models, to allow...

Customer relationship management: Modern aspects of information technology application

Directory of Open Access Journals (Sweden)

Soldić-Aleksić Jasna

2008-01-01

Full Text Available The concept of Customer Relationship Management has emerged around the maxim on the essential importance of the customers for business success of the company. The vital role in the concept development is assigned to an employment of the various information communication technologies: in the scope of operational CRM that is the application of Internet technologies, web browsers, e-mails, POS terminals, call centers; on the other side, analytical CRM involves activities such as data mining, web mining, click stream analysis etc. Modern tendencies in the development of information-communication technologies have generated new communication models between company and its customers, therefore companies are not only focused on the products and services, but also on the communication channels and techniques with customers. On that ground many companies are accepting and using new tools belonging to the web 2.0 technologies which have produced the new CRM model - CRM 2.0.

Area–Oriented Technology Mapping for LUT–Based Logic Blocks

Directory of Open Access Journals (Sweden)

Kubica Marcin

2017-03-01

Full Text Available One of the main aspects of logic synthesis dedicated to FPGA is the problem of technology mapping, which is directly associated with the logic decomposition technique. This paper focuses on using configurable properties of CLBs in the process of logic decomposition and technology mapping. A novel theory and a set of efficient techniques for logic decomposition based on a BDD are proposed. The paper shows that logic optimization can be efficiently carried out by using multiple decomposition. The essence of the proposed synthesis method is multiple cutting of a BDD. A new diagram form called an SMTBDD is proposed. Moreover, techniques that allow finding the best technology mapping oriented to configurability of CLBs are presented. In the experimental section, the presented method (MultiDec is compared with academic and commercial tools. The experimental results show that the proposed technology mapping strategy leads to good results in terms of the number of CLBs.

Mouse Models for Drug Discovery. Can New Tools and Technology Improve Translational Power?

Science.gov (United States)

Zuberi, Aamir; Lutz, Cathleen

2016-01-01

Abstract The use of mouse models in biomedical research and preclinical drug evaluation is on the rise. The advent of new molecular genome-altering technologies such as CRISPR/Cas9 allows for genetic mutations to be introduced into the germ line of a mouse faster and less expensively than previous methods. In addition, the rapid progress in the development and use of somatic transgenesis using viral vectors, as well as manipulations of gene expression with siRNAs and antisense oligonucleotides, allow for even greater exploration into genomics and systems biology. These technological advances come at a time when cost reductions in genome sequencing have led to the identification of pathogenic mutations in patient populations, providing unprecedented opportunities in the use of mice to model human disease. The ease of genetic engineering in mice also offers a potential paradigm shift in resource sharing and the speed by which models are made available in the public domain. Predictively, the knowledge alone that a model can be quickly remade will provide relief to resources encumbered by licensing and Material Transfer Agreements. For decades, mouse strains have provided an exquisite experimental tool to study the pathophysiology of the disease and assess therapeutic options in a genetically defined system. However, a major limitation of the mouse has been the limited genetic diversity associated with common laboratory mice. This has been overcome with the recent development of the Collaborative Cross and Diversity Outbred mice. These strains provide new tools capable of replicating genetic diversity to that approaching the diversity found in human populations. The Collaborative Cross and Diversity Outbred strains thus provide a means to observe and characterize toxicity or efficacy of new therapeutic drugs for a given population. The combination of traditional and contemporary mouse genome editing tools, along with the addition of genetic diversity in new modeling

Mouse Models for Drug Discovery. Can New Tools and Technology Improve Translational Power?

Science.gov (United States)

Zuberi, Aamir; Lutz, Cathleen

2016-12-01

The use of mouse models in biomedical research and preclinical drug evaluation is on the rise. The advent of new molecular genome-altering technologies such as CRISPR/Cas9 allows for genetic mutations to be introduced into the germ line of a mouse faster and less expensively than previous methods. In addition, the rapid progress in the development and use of somatic transgenesis using viral vectors, as well as manipulations of gene expression with siRNAs and antisense oligonucleotides, allow for even greater exploration into genomics and systems biology. These technological advances come at a time when cost reductions in genome sequencing have led to the identification of pathogenic mutations in patient populations, providing unprecedented opportunities in the use of mice to model human disease. The ease of genetic engineering in mice also offers a potential paradigm shift in resource sharing and the speed by which models are made available in the public domain. Predictively, the knowledge alone that a model can be quickly remade will provide relief to resources encumbered by licensing and Material Transfer Agreements. For decades, mouse strains have provided an exquisite experimental tool to study the pathophysiology of the disease and assess therapeutic options in a genetically defined system. However, a major limitation of the mouse has been the limited genetic diversity associated with common laboratory mice. This has been overcome with the recent development of the Collaborative Cross and Diversity Outbred mice. These strains provide new tools capable of replicating genetic diversity to that approaching the diversity found in human populations. The Collaborative Cross and Diversity Outbred strains thus provide a means to observe and characterize toxicity or efficacy of new therapeutic drugs for a given population. The combination of traditional and contemporary mouse genome editing tools, along with the addition of genetic diversity in new modeling systems

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Machine industry technology field (Machine tool); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijjtsu senryaku) kikai sangyo gijutsu bun'ya (kosaku kikai bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 basic research result on industrial technology strategy of a machine tool field. Corresponding to construction of an environment-friendly recycling economic society and economic growth as estimated change in social and industrial structure during 2010-2025, major themes are reuse of machine tools, energy saving, environment design, chip treatment and resource recovery. With preparation of information infrastructures in an advanced information society, major issues are 3D-CAD, remote diagnosis, remote control and self-restoration. Because of decline of the birth rate, positive employment of aged persons and women is desirable. New machining technology for new materials, and fusion of various machining technologies are important. For micro-technology, study should be made on the concept and effect of micro-factory (energy saving, space saving, cost reduction, higher accuracy and higher speed). For higher-accuracy machine tool, static, dynamic, thermal and movement characteristics are the key for improving the proper technology. For faster machining. fine basic structural element, faster main spindle and faster feed are important. (NEDO)

MbT-Tool: An open-access tool based on Thermodynamic Electron Equivalents Model to obtain microbial-metabolic reactions to be used in biotechnological process

Directory of Open Access Journals (Sweden)

Pablo Araujo Granda

2016-01-01

Full Text Available Modelling cellular metabolism is a strategic factor in investigating microbial behaviour and interactions, especially for bio-technological processes. A key factor for modelling microbial activity is the calculation of nutrient amounts and products generated as a result of the microbial metabolism. Representing metabolic pathways through balanced reactions is a complex and time-consuming task for biologists, ecologists, modellers and engineers. A new computational tool to represent microbial pathways through microbial metabolic reactions (MMRs using the approach of the Thermodynamic Electron Equivalents Model has been designed and implemented in the open-access framework NetLogo. This computational tool, called MbT-Tool (Metabolism based on Thermodynamics can write MMRs for different microbial functional groups, such as aerobic heterotrophs, nitrifiers, denitrifiers, methanogens, sulphate reducers, sulphide oxidizers and fermenters. The MbT-Tool's code contains eighteen organic and twenty inorganic reduction-half-reactions, four N-sources (NH4+, NO3−, NO2−, N2 to biomass synthesis and twenty-four microbial empirical formulas, one of which can be determined by the user (CnHaObNc. MbT-Tool is an open-source program capable of writing MMRs based on thermodynamic concepts, which are applicable in a wide range of academic research interested in designing, optimizing and modelling microbial activity without any extensive chemical, microbiological and programing experience.

Portable and Accurate Collection of Calling-Context-Sensitive Bytecode Metrics for the Java Virtual Machine

DEFF Research Database (Denmark)

Sarimbekov, Aibek; Sewe, Andreas; Binder, Walter

2011-01-01

Calling-context profiles and dynamic metrics at the bytecode level are important for profiling, workload characterization, program comprehension, and reverse engineering. Prevailing tools for collecting calling-context profiles or dynamic bytecode metrics often provide only incomplete information...... that compute various dynamic bytecode metrics from the profiles. As a case-study and tutorial on the use of JP2, we use it for crossprofiling for an embedded Java processor....

New tools for the evaluation of daylighting strategies and technologies

Energy Technology Data Exchange (ETDEWEB)

Papamichael, K.; Hitchcock, R.; Ehrlich, C.; Carroll, B.

1998-03-01

The use of daylight for the illumination of building interiors has the potential to enhance the quality of the environment while providing opportunities to save energy by replacing or supplementing electric lighting. Moreover, it has the potential to reduce heating and cooling loads, which offer additional energy saving opportunities as well as reductions in HVAC equipment sizing and cost. All of these benefits, however, assume proper use of daylighting strategies and technologies, whose performance depends on the context of their application. On the other hand, improper use can have significant negative effects on both comfort and energy requirements, such as increased glare and cooling loads. To ensure proper use, designers need design tools that model the dynamic nature of daylight and accurately predict performance with respect to a multitude of performance criteria, extending beyond comfort and energy to include aesthetics, cost, security, safety, etc.

Technology of focus detection for 193nm projection lithographic tool

Science.gov (United States)

Di, Chengliang; Yan, Wei; Hu, Song; Xu, Feng; Li, Jinglong

2012-10-01

With the shortening printing wavelength and increasing numerical aperture of lithographic tool, the depth of focus(DOF) sees a rapidly drop down trend, reach a scale of several hundred nanometers while the repeatable accuracy of focusing and leveling must be one-tenth of DOF, approximately several dozen nanometers. For this feature, this article first introduces several focusing technology, Obtained the advantages and disadvantages of various methods by comparing. Then get the accuracy of dual-grating focusing method through theoretical calculation. And the dual-grating focusing method based on photoelastic modulation is divided into coarse focusing and precise focusing method to analyze, establishing image processing model of coarse focusing and photoelastic modulation model of accurate focusing. Finally, focusing algorithm is simulated with MATLAB. In conclusion dual-grating focusing method shows high precision, high efficiency and non-contact measurement of the focal plane, meeting the demands of focusing in 193nm projection lithography.

Outage Risk Assessment and Management (ORAM) technology to improve outage safety and economics

International Nuclear Information System (INIS)

Kalra, S.P.

2004-01-01

The Electric Power Research Institute (EPRI) has undertaken an aggressive program, called ORAM (Outage Risk Assessment and Management), to provide utilities with tools and technology to assist in managing risk during the planning and conduct of outages. The ORAM program consists of the following 6 steps: i) Perform utility surveys and visits on shutdown risk management needs, ii) Perform probabilistic shutdown safety assessments (PSSAs) to identify generic insights that can be incorporated into risk management guidelines and identify selected areas for the development of contingency actions, iii) Develop risk management guidelines (RMG's) that provide a systematic approach to the planning and conduct of outages from a safety perspective. Incorporate insights from the shutdown safety assessments and other operating experience into the RMG's. iv) Develop selected contingency actions including a thermalhydraulic tool kit to address higher risk time periods and activities identified in the shutdown safety assessments, v) Develop computer software that integrates all of the above capability into an easy to use tool for effective shutdown operation management for utilities, vi) Provide assistance in the transfer of this technology and the application of these tools. This paper briefly describes the technical approach and tools developed under EPRI's ORAM program and its applications for improving outage safety and economics. (author)

Using Enabling Technologies to Advance Data Intensive Analysis Tools in the JPL Tropical Cyclone Information System

Science.gov (United States)

Knosp, B.; Gangl, M. E.; Hristova-Veleva, S. M.; Kim, R. M.; Lambrigtsen, B.; Li, P.; Niamsuwan, N.; Shen, T. P. J.; Turk, F. J.; Vu, Q. A.

2014-12-01

The JPL Tropical Cyclone Information System (TCIS) brings together satellite, aircraft, and model forecast data from several NASA, NOAA, and other data centers to assist researchers in comparing and analyzing data related to tropical cyclones. The TCIS has been supporting specific science field campaigns, such as the Genesis and Rapid Intensification Processes (GRIP) campaign and the Hurricane and Severe Storm Sentinel (HS3) campaign, by creating near real-time (NRT) data visualization portals. These portals are intended to assist in mission planning, enhance the understanding of current physical processes, and improve model data by comparing it to satellite and aircraft observations. The TCIS NRT portals allow the user to view plots on a Google Earth interface. To compliment these visualizations, the team has been working on developing data analysis tools to let the user actively interrogate areas of Level 2 swath and two-dimensional plots they see on their screen. As expected, these observation and model data are quite voluminous and bottlenecks in the system architecture can occur when the databases try to run geospatial searches for data files that need to be read by the tools. To improve the responsiveness of the data analysis tools, the TCIS team has been conducting studies on how to best store Level 2 swath footprints and run sub-second geospatial searches to discover data. The first objective was to improve the sampling accuracy of the footprints being stored in the TCIS database by comparing the Java-based NASA PO.DAAC Level 2 Swath Generator with a TCIS Python swath generator. The second objective was to compare the performance of four database implementations - MySQL, MySQL+Solr, MongoDB, and PostgreSQL - to see which database management system would yield the best geospatial query and storage performance. The final objective was to integrate our chosen technologies with our Joint Probability Density Function (Joint PDF), Wave Number Analysis, and

Predictive model for determining the quality of a call

Science.gov (United States)

Voznak, M.; Rozhon, J.; Partila, P.; Safarik, J.; Mikulec, M.; Mehic, M.

2014-05-01

In this paper the predictive model for speech quality estimation is described. This model allows its user to gain the information about the speech quality in VoIP networks without the need of performing the actual call and the consecutive time consuming sound file evaluation. This rapidly increases usability of the speech quality measurement especially in high load networks, where the actual processing of all calls is rendered difficult or even impossible. This model can reach its results that are highly conformant with the PESQ algorithm only based on the network state parameters that are easily obtainable by the commonly used software tools. Experiments were carried out to investigate whether different languages (English, Czech) have an effect on perceived voice quality for the same network conditions and the language factor was incorporated directly into the model.

The MPO API: A tool for recording scientific workflows

Energy Technology Data Exchange (ETDEWEB)

Wright, John C., E-mail: jcwright@mit.edu [MIT Plasma Science and Fusion Center, Cambridge, MA (United States); Greenwald, Martin; Stillerman, Joshua [MIT Plasma Science and Fusion Center, Cambridge, MA (United States); Abla, Gheni; Chanthavong, Bobby; Flanagan, Sean; Schissel, David; Lee, Xia [General Atomics, San Diego, CA (United States); Romosan, Alex; Shoshani, Arie [Lawrence Berkeley Laboratory, Berkeley, CA (United States)

2014-05-15

Highlights: • A description of a new framework and tool for recording scientific workflows, especially those resulting from simulation and analysis. • An explanation of the underlying technologies used to implement this web based tool. • Several examples of using the tool. - Abstract: Data from large-scale experiments and extreme-scale computing is expensive to produce and may be used for high-consequence applications. The Metadata, Provenance and Ontology (MPO) project builds on previous work [M. Greenwald, Fusion Eng. Des. 87 (2012) 2205–2208] and is focused on providing documentation of workflows, data provenance and the ability to data-mine large sets of results. While there are important design and development aspects to the data structures and user interfaces, we concern ourselves in this paper with the application programming interface (API) – the set of functions that interface with the data server. Our approach for the data server is to follow the Representational State Transfer (RESTful) software architecture style for client–server communication. At its core, the API uses the POST and GET methods of the HTTP protocol to transfer workflow information in message bodies to targets specified in the URL to and from the database via a web server. Higher level API calls are built upon this core API. This design facilitates implementation on different platforms and in different languages and is robust to changes in the underlying technologies used. The command line client implementation can communicate with the data server from any machine with HTTP access.

The MPO API: A tool for recording scientific workflows

International Nuclear Information System (INIS)

Wright, John C.; Greenwald, Martin; Stillerman, Joshua; Abla, Gheni; Chanthavong, Bobby; Flanagan, Sean; Schissel, David; Lee, Xia; Romosan, Alex; Shoshani, Arie

2014-01-01

Highlights: • A description of a new framework and tool for recording scientific workflows, especially those resulting from simulation and analysis. • An explanation of the underlying technologies used to implement this web based tool. • Several examples of using the tool. - Abstract: Data from large-scale experiments and extreme-scale computing is expensive to produce and may be used for high-consequence applications. The Metadata, Provenance and Ontology (MPO) project builds on previous work [M. Greenwald, Fusion Eng. Des. 87 (2012) 2205–2208] and is focused on providing documentation of workflows, data provenance and the ability to data-mine large sets of results. While there are important design and development aspects to the data structures and user interfaces, we concern ourselves in this paper with the application programming interface (API) – the set of functions that interface with the data server. Our approach for the data server is to follow the Representational State Transfer (RESTful) software architecture style for client–server communication. At its core, the API uses the POST and GET methods of the HTTP protocol to transfer workflow information in message bodies to targets specified in the URL to and from the database via a web server. Higher level API calls are built upon this core API. This design facilitates implementation on different platforms and in different languages and is robust to changes in the underlying technologies used. The command line client implementation can communicate with the data server from any machine with HTTP access

Magnetic Tools for Lab-on-a-chip Technologies

Energy Technology Data Exchange (ETDEWEB)

Pekas, Nikola Slobodan [Iowa State Univ., Ames, IA (United States)

2006-01-01

This study establishes a set of magnetics-based tools that have been integrated with microfluidic systems. The overall impact of the work begins to enable the rapid and efficient manipulation and detection of magnetic entities such as particles, picoliter-sized droplets, or bacterial cells. Details of design, fabrication, and theoretical and experimental assessments are presented. The manipulation strategy has been demonstrated in the format of a particle diverter, whereby micron-sized particles are actively directed into desired flow channels at a split-flow junction by means of integrated microelectromagnets. Magnetic detection has been realized by deploying Giant Magnetoresistance (GMR) sensors--microfabricated structures originally developed for use as readout elements in computer hard-drives. We successfully transferred the GMR technology to the lab-on-a-chip arena, and demonstrated the versatility of the concept in several important areas: real-time, integrated monitoring of the properties of multiphase droplet flows; rapid quantitative determination of the concentration of magnetic nanoparticles in droplets of ferrofluids; and high-speed detection of individual magnetic microparticles and magnetotactic bacteria. The study also includes novel schemes for hydrodynamic flow focusing that work in conjunction with GMR-based detection to ensure precise navigation of the sample stream through the GMR detection volume, therefore effectively establishing a novel concept of a microfabricated magnetic flow cytometer.

Report on tool transfer and alignment methods

DEFF Research Database (Denmark)

Tosello, Guido; Gasparin, Stefania; De Grave, Arnaud

2010-01-01

In the last few years, research work has been carried out regarding the feature miniaturization and tooling performance achievable with specific process chains combining different micro machining processes. On the other hand, technologies, strategies and tool design rules in order to optimize the...... process chain for tooling (i.e. hybrid tooling) based on the combination of micro milling and micro electrical discharge machining (EDM) milling, both at machine tool and at machining technology levels....

A goal-based approach for qualification of new technologies: Foundations, tool support, and industrial validation

International Nuclear Information System (INIS)

Sabetzadeh, Mehrdad; Falessi, Davide; Briand, Lionel; Di Alesio, Stefano

2013-01-01

New technologies typically involve innovative aspects that are not addressed by the existing normative standards and hence are not assessable through common certification procedures. To ensure that new technologies can be implemented in a safe and reliable manner, a specific kind of assessment is performed, which in many industries, e.g., the energy sector, is known as Technology Qualification (TQ). TQ aims at demonstrating with an acceptable level of confidence that a new technology will function within specified limits. Expert opinion plays an important role in TQ, both to identify the safety and reliability evidence that needs to be developed and to interpret the evidence provided. Since there are often multiple experts involved in TQ, it is crucial to apply a structured process for eliciting expert opinions, and to use this information systematically when analyzing the satisfaction of the technology's safety and reliability objectives. In this paper, we present a goal-based approach for TQ. Our approach enables analysts to quantitatively reason about the satisfaction of the technology's overall goals and further to identify the aspects that must be improved to increase goal satisfaction. The approach is founded on three main components: goal models, expert elicitation, and probabilistic simulation. We describe a tool, named Modus, that we have developed in support of our approach. We provide an extensive empirical validation of our approach through two industrial case studies and a survey

INFORMATION TECHNOLOGIES AS THE TOOL OF EFFICIENCY IMPROVING OF FUTURE PHYSICS TEACHERS TRAINING TO LABORATORY SESSION IN OPTICS

Directory of Open Access Journals (Sweden)

Goncharenko T.

2017-12-01

Full Text Available The analysis of the problem of the use of information technologies implementation as the tool of the efficiency improving of future physics teachers training to execution of laboratory session in Optics is considered in the article. The problems and contradictions concerning ICT tools use in higher education institutions, the work of which is aimed at future physics teachers training are described. Due to the specifics of future teachers training in higher education institutions, labor market requirements and public procurement, the main ICT tools are identified, that are effective in students’ self-activity work to laboratory session execution. The developed list of electronic resources is divided into blocks according to the topics of laboratory works in Optics. The methodology of using of ICT tools at future students training for laboratory session on the example of individual topics is considered.

Acoustic structure of male loud-calls support molecular phylogeny of Sumatran and Javanese leaf monkeys (genus Presbytis

Directory of Open Access Journals (Sweden)

Meyer Dirk

2012-02-01

Full Text Available Abstract Background The degree to which loud-calls in nonhuman primates can be used as a reliable taxonomic tool is the subject of ongoing debate. A recent study on crested gibbons showed that these species can be well distinguished by their songs; even at the population level the authors found reliable differences. Although there are some further studies on geographic and phylogenetic differences in loud-calls of nonhuman primate species, it is unclear to what extent loud-calls of other species have a similar close relation between acoustic structure, phylogenetic relatedness and geographic distance. We therefore conducted a field survey in 19 locations on Sumatra, Java and the Mentawai islands to record male loud-calls of wild surilis (Presbytis, a genus of Asian leaf monkeys (Colobinae with disputed taxanomy, and compared the structure of their loud-calls with a molecular genetic analysis. Results The acoustic analysis of 100 surili male loud-calls from 68 wild animals confirms the differentiation of P.potenziani, P.comata, P.thomasi and P.melalophos. In a more detailed acoustic analysis of subspecies of P.melalophos, a further separation of the southern P.m.mitrata confirms the proposed paraphyly of this group. In concordance with their geographic distribution we found the highest correlation between call structure and genetic similarity, and lesser significant correlations between call structure and geographic distance, and genetic similarity and geographic distance. Conclusions In this study we show, that as in crested gibbons, the acoustic structure of surili loud-calls is a reliable tool to distinguish between species and to verify phylogenetic relatedness and migration backgrounds of respective taxa. Since vocal production in other nonhuman primates show similar constraints, it is likely that an acoustic analysis of call structure can help to clarify taxonomic and phylogenetic relationships.

Wireless and photonic high-speed communication technologies, circuits and design tools

DEFF Research Database (Denmark)

Krozer, Viktor; Johansen, Tom Keinicke; Jiang, Chenhui

2009-01-01

were reported. These communication systems present new challenges for circuit designers. The presentation will be devoted to technologies and various aspects of circuit design for 100 G applications. We will present overview on wired and wireless systems demonstrating the challenges of this research...... including design challenges, relevant trade-offs and the present bottlenecks. Different system architectures will be presented with their impact on component requirements. Similarities and differences of wired and wireless applications will be pointed out. Design methodologies, necessary tools and circuit...... are fundamental to emerging consumer and professional applications. These systems start to emerge as near future applications and are subject of ongoing research activities in Europe, for example within the EU FP6 GIBON project. Wireless systems with over 100 GHz carriers as well as first over 100-G fibre systems...

Integrated hydraulic booster/tool string technology for unfreezing of stuck downhole strings in horizontal wells

Science.gov (United States)

Tian, Q. Z.

2017-12-01

It is common to use a jarring tool to unfreeze stuck downhole string. However, in a horizontal well, influenced by the friction caused by the deviated section, jarring effect is poor; on the other hand, the forcing point can be located in the horizontal section by a hydraulic booster and the friction can be reduced, but it is time-consuming and easy to break downhole string using a large-tonnage and constant pull force. A hydraulic booster - jar tool string has been developed for unfreezing operation in horizontal wells. The technical solution involves three elements: a two-stage parallel spring cylinder structure for increasing the energy storage capacity of spring accelerators; multiple groups of spring accelerators connected in series to increase the working stroke; a hydraulic booster intensifying jarring force. The integrated unfreezing tool string based on these three elements can effectively overcome the friction caused by a deviated borehole, and thus unfreeze a stuck string with the interaction of the hydraulic booster and the mechanical jar which form an alternatively dynamic load. Experimental results show that the jarring performance parameters of the hydraulic booster-jar unfreezing tool string for the horizontal wells are in accordance with original design requirements. Then field technical parameters were developed based on numerical simulation and experimental data. Field application shows that the hydraulic booster-jar unfreezing tool string is effective to free stuck downhole tools in a horizontal well, and it reduces hook load by 80% and lessens the requirement of workover equipment. This provides a new technology to unfreeze stuck downhole string in a horizontal well.

Humans, Intentionality, Experience And Tools For Learning: Some Contributions From Post-cognitive Theories To The Use Of Technology In Physics Education

Science.gov (United States)

Bernhard, Jonte

2007-11-01

Human cognition cannot be properly understood if we do not take the use of tools into account. The English word cognition stems from the Latin "cognoscere," meaning "to become acquainted with" or "to come to know." Following the original Latin meaning we should not only study "what happens in the head" if we want to study cognition. Experientially based perspectives, such as pragmatism, phenomenology, phenomenography, and activity theory, stress that we should study person-world relationships. Technologies actively shape the character of human-world relationships. An emergent understanding in modern cognitive research is the co-evolution of the human brain and human use of tools and the active character of perception. Thus, I argue that we must analyze the role of technologies in physics education in order to realize their full potential as tools for learning, and I will provide selected examples from physics learning environments to support this assertion.

Using Web-Based Technologies for Network Management Tools

National Research Council Canada - National Science Library

Agami, Arie

1997-01-01

.... New solutions to current network management tools problems may be found in the increasingly popular World Wide Web, Internet tools such as Java, and remote database access through the Internet...

Manufacturing technology development of plasma/ion nitriding for improvement of hardness of machine components and tools

International Nuclear Information System (INIS)

Suprapto; Tjipto Sujitno; Saminto

2015-01-01

The manufacturing technology development of plasma/ion nitriding to improve of hardness of machine components and tools has been done. The development of this technology aims to improve device performance plasma nitriding double chamber and conducted with the addition of thermal radiation shield. Testing was done by testing for preheating operation (start-up), test operation for conditions nitriding and test for nitriding process. The results show that: the plasma nitriding device can be operated for nitriding process at the temperature of about 500 °C for 6 hours, using the thermal radiation shield obtained outside wall temperature of about 65 °C and shorten start-up time to about 60 minutes. The use of thermal radiation shield can also improve the efficiency of the electric power supply and increase the operating temperature for nitriding process. Test for nitriding obtained increase of hardness 1.33 times for the original camshaft (genuine parts) and 1.8 times for the imitation camshaft (imitation parts), the results are compared with after the tempering process at a temperature of 600 °C. For sample SS 304 was 2.45 times compared with before nitrided These results indicate that the development of manufacturing technology of plasma/ion nitriding to increase hardness of machine components and tools have been successfully able to increase the hardness, although still need to be optimized. Besides that, these devices can be developed to use for the process of carburizing and carbonitriding. (author)

TOOLS OF KNOWLEDGE DISSEMINATION WITHIN A NATIONAL DEFENSE INSTITUTION FOR INNOVATION, TECHNOLOGY AND SCIENCE

Directory of Open Access Journals (Sweden)

Edson Aparecida de Araújo Querido Oliveira

2006-11-01

Full Text Available This paper describes and analyzes in a National Defense Institution for Innovation, Technology and Science its tools of knowledge dissemination. The methodology contemplates the period of 2004 and 2005. Qualitative and quantitative information orientate the research in order to understand focal aspects on knowledge dissemination, in comparison with theoretical references of renowned authors and other elaborated research searching for elements to perform an organizational diagnosis, focused on the knowledge dissemination as well as on the forces which promote or obstruct the organizational development. Conclusions are that the tools of knowledge dissemination must suitable to spread the tacit knowledge in such a way as the explicit ones and that, in a National Defense Institution, other important aspects must be considered, a time that, being the spread knowledge of wrong form can, besides bringing damages for the organization, to compromise the national sovereignty.

Conventional Oil and Gas Technologies. IEA ETSAP technology brief P01

Energy Technology Data Exchange (ETDEWEB)

Seljom, Pernille [IFE (Norway)], E-mail: pernille.seljom@ife.no

2010-05-15

This technology brief on conventional oil and gas technologies is part of a series produced by the IEA ETSAP agreement called the energy technology data source (E-Tech-DS). The E-Tech-DS series consists of a number of 5-10 page technology briefs similar to the IEA Energy Technology Essentials. Based on the data collected for the models that the Energy Technology Systems Analysis Programme (ETSAP) is known for, ETSAP also prepares technology briefs, called E-TechDS. The E-TechDS briefs are standardized presentations of basic information (process, status, performance, costs, potential, and barriers) for key energy technology clusters. Each brief includes an overview of the technology, charts and graphs, and a summary data table, and usually ending with some key references and further information. The E TechDS briefs are intended to offer essential, reliable and quantitative information to energy analysts, experts, policymakers, investors and media from both developed and developing countries. This specific brief focuses on the state of oil and gas exploration, development, and production/recovery technologies.

Bookline: a technological tool at service of scientific papers evaluation in academic events

Directory of Open Access Journals (Sweden)

Cênio Back Weyh

2016-12-01

Full Text Available The use of technologies has been more common each day in teaching. The softwares that facilitate the teacher’s work as a technological source can also be used for other aspects of education. The scientific events are fundamental for the particular student’s learnings in higher education. Considering the complexity of coordinating an event due to the number of people involved and the means of sending works for analysis and their evaluation during the event, we looked forward to developing technological tools. In this sense, we developed a software to manage scientific events providing an interface for the organization of the works’ evaluation and of the criteria for evaluation, as well as the management of evaluators and their thematic areas of performance. The software named Bookline was designed for mobile environments, making it possible for the evaluators to wander around freely during the evaluations, getting additional information about each criterion of evaluation, in order to enable the widest spectrum in the constitution of the work’s mark. At the end of the evaluations, the evaluator sends his considerations to the central server, that processes and compiles its data and from the rest of the evaluators identifying if the work was accepted.

GPS as a tool used in tourism as illustrated by selected mobile applications

Science.gov (United States)

Szark-Eckardt, Mirosława

2017-11-01

Mobile technologies have permanently changed our way of life. Their availability, common use and introducing to virtually all areas of human activity means that we can call present times the age of mobility [1]. Mobile applications based on the GPS module belong to the most dynamically developing apps as particularly reflected in tourism. A multitude of applications dedicated to different participants of tourism, which can be operated by means of smartphones or simple GPS trackers, are encouraging more people to reach for this kind of technology perceiving it as a basic tool used in today's tourism. Due to an increasingly wider access to mobile applications, not only more dynamic development of tourism itself can be noticed, but also the growth of healthy behaviours that comprise a positive "side effect" of tourism based on mobile technology. This article demonstrates a correlation between health and physical condition of the population and the use of mobile applications.

Biodiversity technologies: tools as change agents

Science.gov (United States)

Snaddon, Jake; Petrokofsky, Gillian; Jepson, Paul; Willis, Katherine J.

2013-01-01

A meeting on Biodiversity Technologies was held by the Biodiversity Institute, Oxford on the 27–28 of September 2012 at the Department of Zoology, University of Oxford. The symposium brought together 36 speakers from North America, Australia and across Europe, presenting the latest research on emerging technologies in biodiversity science and conservation. Here we present a perspective on the general trends emerging from the symposium. PMID:23221877

Portfolio: a prototype workstation for development and evaluation of tools for analysis and management of digital portal images

International Nuclear Information System (INIS)

Boxwala, Aziz A.; Chaney, Edward L.; Fritsch, Daniel S.; Friedman, Charles P.; Rosenman, Julian G.

1998-01-01

Purpose: The purpose of this investigation was to design and implement a prototype physician workstation, called PortFolio, as a platform for developing and evaluating, by means of controlled observer studies, user interfaces and interactive tools for analyzing and managing digital portal images. The first observer study was designed to measure physician acceptance of workstation technology, as an alternative to a view box, for inspection and analysis of portal images for detection of treatment setup errors. Methods and Materials: The observer study was conducted in a controlled experimental setting to evaluate physician acceptance of the prototype workstation technology exemplified by PortFolio. PortFolio incorporates a windows user interface, a compact kit of carefully selected image analysis tools, and an object-oriented data base infrastructure. The kit evaluated in the observer study included tools for contrast enhancement, registration, and multimodal image visualization. Acceptance was measured in the context of performing portal image analysis in a structured protocol designed to simulate clinical practice. The acceptability and usage patterns were measured from semistructured questionnaires and logs of user interactions. Results: Radiation oncologists, the subjects for this study, perceived the tools in PortFolio to be acceptable clinical aids. Concerns were expressed regarding user efficiency, particularly with respect to the image registration tools. Conclusions: The results of our observer study indicate that workstation technology is acceptable to radiation oncologists as an alternative to a view box for clinical detection of setup errors from digital portal images. Improvements in implementation, including more tools and a greater degree of automation in the image analysis tasks, are needed to make PortFolio more clinically practical

Maker Cultures and the Prospects for Technological Action.

Science.gov (United States)

Nascimento, Susana; Pólvora, Alexandre

2018-06-01

Supported by easier and cheaper access to tools and expanding communities, maker cultures are pointing towards the ideas of (almost) everyone designing, creating, producing and distributing renewed, new and improved products, machines, things or artefacts. A careful analysis of the assumptions and challenges of maker cultures emphasizes the relevance of what may be called technological action, that is, active and critical interventions regarding the purposes and applications of technologies within ordinary lives, thus countering the deterministic trends of current directions of technology. In such transformative potential, we will explore a set of elements what is and could be technological action through snapshots of maker cultures based on the empirical research conducted in three particular contexts: the Fab Lab Network, Maker Media core outputs and initiatives such as Maker Faires, and the Open Source Hardware Association (OSHWA). Elements such as control and empowerment through material engagement, openness and sharing, and social, cultural, political and ethical values of the common good in topics such as diversity, sustainability and transparency, are critically analysed.

New technologies and paradigms in education and research: some reflections

Directory of Open Access Journals (Sweden)

BHAYA, A.

2013-06-01

Full Text Available This article calls attention to the fact that higher education and research worldwide is being transformed by new tools, new methods of evaluation and collaboration and so on. Although some notice has been taken of this in Brazil, by and large, there has not been much debate or discussion on the impact of these novelties on university education and research. We briefly discuss some of these new ideas and technologies and speculate on the changes that they might or should engender in the Brazilian system of higher education.

Control room design and human factors using a virtual reality based tool for design, test and training

International Nuclear Information System (INIS)

Lirvall, Peter

1998-02-01

This report describes a user-centred approach to control room design adopted by IFE for the nuclear industry. The novelty of this approach is the development of a Control Room Philosophy, and the use of Virtual Reality (VR) technology as a tool in the design process, integrated with a specially developed Design Documentation System (DDS) and a process display prototyping tool PICASSO-3. The control room philosophy identifies all functional aspects of a control centre, to define the baseline principles and guidelines for the design. The use of VR technology enables end-users of the control room design (e.g. control room operators) to specify their preferred design of the new control room, and to replace the need for a physical mock-up to test and evaluate the proposed design. The DDS, integrated with the VR design tool, guides the control room operators, through a structured approach, to document the proposed design in a complete design specification. The VR tool, specially developed by IFE, is called the VR based Design, Test and Training tool (VR DTandT). It is not only intended to visualise the design, but also to test and evaluate the design. When the design is implemented, the same model is re-used as a VR based training simulator for operators. A special feature in the VR DTandT tool is that the verification and validation (VandV) tests, concerning human factors, are according to the regulative standards for nuclear control rooms

Visualization and interaction tools for aerial photograph mosaics

Science.gov (United States)

Fernandes, João Pedro; Fonseca, Alexandra; Pereira, Luís; Faria, Adriano; Figueira, Helder; Henriques, Inês; Garção, Rita; Câmara, António

1997-05-01

This paper describes the development of a digital spatial library based on mosaics of digital orthophotos, called Interactive Portugal, that will enable users both to retrieve geospatial information existing in the Portuguese National System for Geographic Information World Wide Web server, and to develop local databases connected to the main system. A set of navigation, interaction, and visualization tools are proposed and discussed. They include sketching, dynamic sketching, and navigation capabilities over the digital orthophotos mosaics. Main applications of this digital spatial library are pointed out and discussed, namely for education, professional, and tourism markets. Future developments are considered. These developments are related to user reactions, technological advancements, and projects that also aim at delivering and exploring digital imagery on the World Wide Web. Future capabilities for site selection and change detection are also considered.

TECHNOLOGICAL ADVANCEMENT OF DEPOSIT WELDING AND GAS LASER CUTTING TO INCREASE THE EFFICIENCY OF THE BIMETALLIC TOOL PRODUCTION

Directory of Open Access Journals (Sweden)

Burlachenko Oleg Vasil’evich

2017-08-01

Full Text Available Deposit welding is the application of a layer of metal on the surface of a product using fusion welding. In this paper, we consider the method of improving the technology of gas laser cutting, which makes it possible to achieve a high productivity of manufacturing a bimetallic tool. The present paper is concerned with the advantages of gas laser cutting which allows to consider this particular process of separating materials as highly-productive, low-waste, and advanced method of removing allowances of weld-deposit high-speed steel on the working surfaces of bimetallic tool. Urgency of the use of deposit welding and gas laser cutting to improve the efficiency of production of bimetallic tool is shown. The comparative analysis of gas-laser cutting and other cutting methods is given according to the geometrical parameters of cutting and surface quality. Analysis of the results of experimental studies has confirmed the high technological attractiveness and economic efficiency of manufacturing composite structures of punches and matrices when applying deposit welding of cutting parts with high-speed steels. The cost of dimensional processing of the welded cutting part is reduced by 4 to 6 times, while the manufacturing time is reduced by 6 to 12 times.

Advanced pressure tube sampling tools

International Nuclear Information System (INIS)

Wittich, K.C.; King, J.M.

2002-01-01

Deuterium concentration is an important parameter that must be assessed to evaluate the Fitness for service of CANDU pressure tubes. In-reactor pressure tube sampling allows accurate deuterium concentration assessment to be made without the expenses associated with fuel channel removal. This technology, which AECL has developed over the past fifteen years, has become the standard method for deuterium concentration assessment. AECL is developing a multi-head tool that would reduce in-reactor handling overhead by allowing one tool to sequentially sample at all four axial pressure tube locations before removal from the reactor. Four sets of independent cutting heads, like those on the existing sampling tools, facilitate this incorporating proven technology demonstrated in over 1400 in-reactor samples taken to date. The multi-head tool is delivered by AECL's Advanced Delivery Machine or other similar delivery machines. Further, AECL has developed an automated sample handling system that receives and processes the tool once out of the reactor. This system retrieves samples from the tool, dries, weighs and places them in labelled vials which are then directed into shielded shipping flasks. The multi-head wet sampling tool and the automated sample handling system are based on proven technology and offer continued savings and dose reduction to utilities in a competitive electricity market. (author)

Calling patterns in human communication dynamics.

Science.gov (United States)

Jiang, Zhi-Qiang; Xie, Wen-Jie; Li, Ming-Xia; Podobnik, Boris; Zhou, Wei-Xing; Stanley, H Eugene

2013-01-29

Modern technologies not only provide a variety of communication modes (e.g., texting, cell phone conversation, and online instant messaging), but also detailed electronic traces of these communications between individuals. These electronic traces indicate that the interactions occur in temporal bursts. Here, we study intercall duration of communications of the 100,000 most active cell phone users of a Chinese mobile phone operator. We confirm that the intercall durations follow a power-law distribution with an exponential cutoff at the population level but find differences when focusing on individual users. We apply statistical tests at the individual level and find that the intercall durations follow a power-law distribution for only 3,460 individuals (3.46%). The intercall durations for the majority (73.34%) follow a Weibull distribution. We quantify individual users using three measures: out-degree, percentage of outgoing calls, and communication diversity. We find that the cell phone users with a power-law duration distribution fall into three anomalous clusters: robot-based callers, telecom fraud, and telephone sales. This information is of interest to both academics and practitioners, mobile telecom operators in particular. In contrast, the individual users with a Weibull duration distribution form the fourth cluster of ordinary cell phone users. We also discover more information about the calling patterns of these four clusters (e.g., the probability that a user will call the c(r)-th most contact and the probability distribution of burst sizes). Our findings may enable a more detailed analysis of the huge body of data contained in the logs of massive users.

Formalization of Technological Knowledge in the Field of Metallurgy using Document Classification Tools Supported with Semantic Techniques

Directory of Open Access Journals (Sweden)

Regulski K.

2017-06-01

Full Text Available The process of knowledge formalization is an essential part of decision support systems development. Creating a technological knowledge base in the field of metallurgy encountered problems in acquisition and codifying reusable computer artifacts based on text documents. The aim of the work was to adapt the algorithms for classification of documents and to develop a method of semantic integration of a created repository. Author used artificial intelligence tools: latent semantic indexing, rough sets, association rules learning and ontologies as a tool for integration. The developed methodology allowed for the creation of semantic knowledge base on the basis of documents in natural language in the field of metallurgy.

Analysis on machine tool systems using spindle vibration monitoring for automatic tool changer

OpenAIRE

Shang-Liang Chen; Yin-Ting Cheng; Chin-Fa Su

2015-01-01

Recently, the intelligent systems of technology have become one of the major items in the development of machine tools. One crucial technology is the machinery status monitoring function, which is required for abnormal warnings and the improvement of cutting efficiency. During processing, the mobility act of the spindle unit determines the most frequent and important part such as automatic tool changer. The vibration detection system includes the development of hardware and software, such as ...

Does Controversial Science Call For Public Participation? The Case Of Gmo Skepticism

Directory of Open Access Journals (Sweden)

Andreas Christiansen

2017-12-01

Full Text Available Many instances of new and emerging science and technology are controversial. Although a number of people, including scientific experts, welcome these developments, a considerable skepticism exists among members of the public. The use of genetically modified organisms (GMOs is a case in point. In science policy and in science communication, it is widely assumed that such controversial science and technology require public participation in the policy-making process. We examine this view, which we call the Public Participation Paradigm, using the case of GMOs as an example. We suggest that a prominent reason behind the call for public participation is the belief that such participation is required for democratic legitimacy. We then show that the most prominent accounts of democratic legitimacy do not, in fact, entail that public participation is required in cases of controversial science in general, or in the case of GMOs in particular.

Robotic education, a tool for the theaching-learning of the science and technology

Directory of Open Access Journals (Sweden)

Kathia Pittí Patiño

2012-07-01

Full Text Available Normal.dotm 0 0 1 113 649 Universidad de Salamanca 5 1 797 12.0 0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} This paper presents and analyzes the educational robotics as a tool to support teaching and learning process at the level of pre-media, primarily engaged in complex subjects such as mathematics, physics and computer science, among others. The study was limited to high schools in the province of Chiriqui, Panama, took a sample of six schools in the province and for each school involved both students and teachers. The main objective of the project was to demonstrate how robotics education, facilitates and encourages teaching and learning of science and technology. The results showed that robotics could become an excellent tool to understand abstract concepts and complex subjects in the area of science and technology, as well as allowing developing basic skills such as teamwork.

Air puff-induced 22-kHz calls in F344 rats.

Science.gov (United States)

Inagaki, Hideaki; Sato, Jun

2016-03-01

Air puff-induced ultrasonic vocalizations in adult rats, termed "22-kHz calls," have been applied as a useful animal model to develop psychoneurological and psychopharmacological studies focusing on human aversive affective disorders. To date, all previous studies on air puff-induced 22-kHz calls have used outbred rats. Furthermore, newly developed gene targeting technologies, which are essential for further advancement of biomedical experiments using air puff-induced 22-kHz calls, have enabled the production of genetically modified rats using inbred rat strains. Therefore, we considered it necessary to assess air puff-induced 22-kHz calls in inbred rats. In this study, we assessed differences in air puff-induced 22-kHz calls between inbred F344 rats and outbred Wistar rats. Male F344 rats displayed similar total (summed) duration of air puff-induced 22 kHz vocalizations to that of male Wistar rats, however, Wistar rats emitted fewer calls of longer duration, while F344 rats emitted higher number of vocalizations of shorter duration. Additionally, female F344 rats emitted fewer air puff-induced 22-kHz calls than did males, thus confirming the existence of a sex difference that was previously reported for outbred Wistar rats. The results of this study could confirm the reliability of air puff stimulus for induction of a similar amount of emissions of 22-kHz calls in different rat strains, enabling the use of air puff-induced 22-kHz calls in inbred F344 rats and derived genetically modified animals in future studies concerning human aversive affective disorders. Copyright © 2015 Elsevier Inc. All rights reserved.

Surgeon distress as calibrated by hours worked and nights on call.

Science.gov (United States)

Balch, Charles M; Shanafelt, Tait D; Dyrbye, Lotte; Sloan, Jeffrey A; Russell, Thomas R; Bechamps, Gerald J; Freischlag, Julie A

2010-11-01

The relationships of working hours and nights on call per week with various parameters of distress among practicing surgeons have not been previously examined in detail. More than 7,900 members of the American College of Surgeons responded to an anonymous, cross-sectional survey. The survey included self-assessment of their practice setting, a validated depression screening tool, and standardized assessments of burnout and quality of life. There was a clear gradient between hours and burnout, with the prevalence of burnout ranging from 30% for surgeons working hours/week, 44% for 60 to 80 hours/week, and 50% for those working >80 hours/week (p hours and nights on call (both p worked >80 hours/week reported a higher rate of medical errors compared with those who worked hours/week (10.7% versus 6.9%; p work and home conflicts were higher among surgeons who worked longer hours or had ≥2 nights on call. A significantly higher proportion of surgeons who worked >80 hours/week or had >2 nights on call/week would not become a surgeon again (p hours worked and nights on call per week appear to have a substantial impact on surgeons, both professionally and personally. These factors are strongly related to burnout, depression, career satisfaction, and work and home conflicts. Copyright © 2010 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Vehicle Technology Simulation and Analysis Tools | Transportation Research

Science.gov (United States)

Analysis Tools NREL developed the following modeling, simulation, and analysis tools to investigate novel design goals (e.g., fuel economy versus performance) to find cost-competitive solutions. ADOPT Vehicle Simulator to analyze the performance and fuel economy of conventional and advanced light- and

Marketing technologically advanced products

NARCIS (Netherlands)

Bender, Horst

1989-01-01

This paper calls for a merger of technology and marketing under a customer value perspective; for an enhancement of the traditional technological innovation orientation of the technology-based firm with a market thrust. It establishes technology-based products as product-service offerings that are

The secondary metabolite bioinformatics portal: Computational tools to facilitate synthetic biology of secondary metabolite production

Directory of Open Access Journals (Sweden)

Tilmann Weber

2016-06-01

Full Text Available Natural products are among the most important sources of lead molecules for drug discovery. With the development of affordable whole-genome sequencing technologies and other ‘omics tools, the field of natural products research is currently undergoing a shift in paradigms. While, for decades, mainly analytical and chemical methods gave access to this group of compounds, nowadays genomics-based methods offer complementary approaches to find, identify and characterize such molecules. This paradigm shift also resulted in a high demand for computational tools to assist researchers in their daily work. In this context, this review gives a summary of tools and databases that currently are available to mine, identify and characterize natural product biosynthesis pathways and their producers based on ‘omics data. A web portal called Secondary Metabolite Bioinformatics Portal (SMBP at http://www.secondarymetabolites.org is introduced to provide a one-stop catalog and links to these bioinformatics resources. In addition, an outlook is presented how the existing tools and those to be developed will influence synthetic biology approaches in the natural products field.

Perceiving a calling, living a calling, and job satisfaction: testing a moderated, multiple mediator model.

Science.gov (United States)

Duffy, Ryan D; Bott, Elizabeth M; Allan, Blake A; Torrey, Carrie L; Dik, Bryan J

2012-01-01

The current study examined the relation between perceiving a calling, living a calling, and job satisfaction among a diverse group of employed adults who completed an online survey (N = 201). Perceiving a calling and living a calling were positively correlated with career commitment, work meaning, and job satisfaction. Living a calling moderated the relations of perceiving a calling with career commitment and work meaning, such that these relations were more robust for those with a stronger sense they were living their calling. Additionally, a moderated, multiple mediator model was run to examine the mediating role of career commitment and work meaning in the relation of perceiving a calling and job satisfaction, while accounting for the moderating role of living a calling. Results indicated that work meaning and career commitment fully mediated the relation between perceiving a calling and job satisfaction. However, the indirect effects of work meaning and career commitment were only significant for individuals with high levels of living a calling, indicating the importance of living a calling in the link between perceiving a calling and job satisfaction. Implications for research and practice are discussed. (c) 2012 APA, all rights reserved.

The Call to Duty: An Historic Overview of How Education Responds to Changes in the Economy

Science.gov (United States)

Sky Lark, Taj'ullah

2011-01-01

An educated populace is vital to economic growth. Throughout the history of education in America, society has found it necessary to call upon education to address its economic challenges. During the twentieth century, the call for education to address technological advances, economic inequities, and to rescue free enterprise was dire. The U.S.…

Call Center Capacity Planning

DEFF Research Database (Denmark)

Nielsen, Thomas Bang

in order to relate the results to the service levels used in call centers. Furthermore, the generic nature of the approximation is demonstrated by applying it to a system incorporating a dynamic priority scheme. In the last paper Optimization of overflow policies in call centers, overflows between agent......The main topics of the thesis are theoretical and applied queueing theory within a call center setting. Call centers have in recent years become the main means of communication between customers and companies, and between citizens and public institutions. The extensively computerized infrastructure...... in modern call centers allows for a high level of customization, but also induces complicated operational processes. The size of the industry together with the complex and labor intensive nature of large call centers motivates the research carried out to understand the underlying processes. The customizable...

Radiation Emergency Preparedness Tools: Virtual Community Reception Center

Centers for Disease Control (CDC) Podcasts

This podcast is an overview of resources from the Clinician Outreach and Communication Activity (COCA) Call: Practical Tools for Radiation Emergency Preparedness. A specialist working with CDC's Radiation Studies Branch describes a web-based training tool known as a Virtual Community Reception Center (vCRC).

SMARTE: SUSTAINABLE MANAGEMENT APPROACHES AND REVITALIZATION TOOLS-ELECTRONIC (BELFAST, IRELAND)

Science.gov (United States)

The U.S.-German Bilateral Working Group is developing Site-specific Management Approaches and Redevelopment Tools (SMART). In the U.S., the SMART compilation is housed in a web-based, decision support tool called SMARTe. All tools within SMARTe that are developed specifically for...

Research on the tool holder mode in high speed machining

Science.gov (United States)

Zhenyu, Zhao; Yongquan, Zhou; Houming, Zhou; Xiaomei, Xu; Haibin, Xiao

2018-03-01

High speed machining technology can improve the processing efficiency and precision, but also reduce the processing cost. Therefore, the technology is widely regarded in the industry. With the extensive application of high-speed machining technology, high-speed tool system has higher and higher requirements on the tool chuck. At present, in high speed precision machining, several new kinds of clip heads are as long as there are heat shrinkage tool-holder, high-precision spring chuck, hydraulic tool-holder, and the three-rib deformation chuck. Among them, the heat shrinkage tool-holder has the advantages of high precision, high clamping force, high bending rigidity and dynamic balance, etc., which are widely used. Therefore, it is of great significance to research the new requirements of the machining tool system. In order to adapt to the requirement of high speed machining precision machining technology, this paper expounds the common tool holder technology of high precision machining, and proposes how to select correctly tool clamping system in practice. The characteristics and existing problems are analyzed in the tool clamping system.

Measured efficiency of a luminescent solar concentrator PV module called Leaf Roof

NARCIS (Netherlands)

Reinders, Angèle H.M.E; Debije, Michael G.; Rosemann, Alexander

2017-01-01

A functional prototype of a luminescent solar concentrator photovoltaic (LSC PV) module, called Leaf Roof, aims at demonstrating the design features of LSC PV technologies such as coloring, transparency, and flexibility in physical shape. In this paper, the prototype is presented and the first

Reflexive Photography, Attitudes, Behavior, and CALL: ITAs Improving Spoken English Intelligibility

Science.gov (United States)

Wallace, Lara

2015-01-01

Research in the field of Computer-Assisted Language Learning (CALL) has frequently taken a top-down approach when investigating learners' attitudes and behavior, both in the course as well as for their personal use. Suggestions are given for use of technology, and future research (Beatty, 2010; Levy & Stockwell, 2006). One perspective that has…

JPEG XS call for proposals subjective evaluations

Science.gov (United States)

McNally, David; Bruylants, Tim; Willème, Alexandre; Ebrahimi, Touradj; Schelkens, Peter; Macq, Benoit

2017-09-01

In March 2016 the Joint Photographic Experts Group (JPEG), formally known as ISO/IEC SC29 WG1, issued a call for proposals soliciting compression technologies for a low-latency, lightweight and visually transparent video compression scheme. Within the JPEG family of standards, this scheme was denominated JPEG XS. The subjective evaluation of visually lossless compressed video sequences at high resolutions and bit depths poses particular challenges. This paper describes the adopted procedures, the subjective evaluation setup, the evaluation process and summarizes the obtained results which were achieved in the context of the JPEG XS standardization process.

Calle Blanco

Directory of Open Access Journals (Sweden)

Gonzalo Cerda Brintrup

1988-06-01

Full Text Available Importante arteria, que comunica el sector del puerto con la plaza. Las más imponentes construcciones se sucedían de un modo continuo, encaramándose a ambos lados de la empinada calle. Antes del gran incendio de 1936 grandes casonas de madera destacaban en calle Irarrázabal y en la esquina de ésta con calle Blanco, la más hermosa construcción pertenecía a don Alberto Oyarzún y la casa vecina hacia Blanco era de don Mateo Miserda, limitada por arriba con la casa de don Augusto Van Der Steldt y ésta era seguida de la casa de don David Barrientos provista de cuatro cúpulas en las esquinas y de un amplio corredor en el frontis. Todas estas construcciones de madera fueron destruidas en el gran incendio de 1936.

Secure, web-accessible call rosters for academic radiology departments.

Science.gov (United States)

Nguyen, A V; Tellis, W M; Avrin, D E

2000-05-01

Traditionally, radiology department call rosters have been posted via paper and bulletin boards. Frequently, changes to these lists are made by multiple people independently, but often not synchronized, resulting in confusion among the house staff and technical staff as to who is on call and when. In addition, multiple and disparate copies exist in different sections of the department, and changes made would not be propagated to all the schedules. To eliminate such difficulties, a paperless call scheduling application was developed. Our call scheduling program allowed Java-enabled web access to a database by designated personnel from each radiology section who have privileges to make the necessary changes. Once a person made a change, everyone accessing the database would see the modification. This eliminates the chaos resulting from people swapping shifts at the last minute and not having the time to record or broadcast the change. Furthermore, all changes to the database were logged. Users are given a log-in name and password and can only edit their section; however, all personnel have access to all sections' schedules. Our applet was written in Java 2 using the latest technology in database access. We access our Interbase database through the DataExpress and DB Swing (Borland, Scotts Valley, CA) components. The result is secure access to the call rosters via the web. There are many advantages to the web-enabled access, mainly the ability for people to make changes and have the changes recorded and propagated in a single virtual location and available to all who need to know.

Climate Action Planning Tool | NREL

Science.gov (United States)

NREL's Climate Action Planning Tool provides a quick, basic estimate of how various technology options can contribute to an overall climate action plan for your research campus. Use the tool to Tool Calculation Formulas and Assumptions Climate Neutral Research Campuses Website Climate Neutral

A framework of call admission control procedures for integrated services mobile wireless networks

International Nuclear Information System (INIS)

Mahmoud, Ashraf S. Hasan; Al-Qahtani, Salman A.

2007-01-01

This paper presents a general framework for a wide range of call admission control (CAC) algorithms. For several CAC schemes, which are a subset of this general framework, an analytical performance evaluation is presented for a multi-traffic mobile wireless network. These CAC algorithms consider a variety of mechanisms to prioritize traffic in an attempt to support different levels of quality of service (QoS) for different types of calls. These mechanisms include dividing the handoff traffic into more than one class and using guard channels or allowing channel splitting to admit more handoff calls. Other mechanisms aimed at adding priority for handoff calls consider employing queuing of handoff calls or dynamically reducing the number lower priority calls. Furthermore our analysis relaxes the typically used assumptions of equal channel holding time and equal resource usage for voice and data calls. The main contribution of this paper is the development of an analytical model for each of the three CAC algorithms specified in this study. In addition to the call blocking and termination probabilities which are usually cited as the performance metrics, in this work we derive and evaluate other metrics that not have be considered by the previous work such as the average queue length, the average queue residency, and the time-out probability for handoff calls. We also develop a simulation tool to test and verify our results. Finally, we present numerical examples to demonstrate the performance of the proposed CAG algorithms and we show that analytical and simulation results are in total agreement. (author)

DO Get Technical! Using Technology in Library Instruction

Directory of Open Access Journals (Sweden)

Nicole Eva

2011-12-01

Full Text Available Today’s post-secondary students are digital natives. Much has been said and written about how to reach this generation, and the consensus seems to be that we need to meet them on their turf. In this session presented at WILU 2011 in Regina, SK, two librarians from the University of Lethbridge shared their experiences with using technology to engage students in library instruction. The hands-on session introduced some simple tools librarians can learn quickly and apply to spice up their instruction with technology. These include creating online animated videos using Xtranormal, a low-cost tool way to create polished and humourous videos to introduce or summarize key information literacy concepts; and adding interactive polling to PowerPoint presentations using a tool called Poll Everywhere, which is an effective way to instantly engage students in instruction using the web or web-enabled devices. Interactive polling eliminates many of the challenges of using clickers which are prevalent in many post-secondary library instruction environments. The presenters also discussed how they have experimented with wikis to encourage active learning and student collaboration in a series of library instruction sessions. Wikis allow for free and paperless student participation in knowledge creation in an online forum. Finally, they demonstrated how they have used Skype to deliver library instruction at a distance, including the use of the screen sharing feature. The presenters stressed the ease of use of these free or low-cost tools to improve classroom engagement and add interest to sessions.

Managing Variant Calling Files the Big Data Way: Using HDFS and Apache Parquet

NARCIS (Netherlands)

Boufea, Aikaterini; Finkers, H.J.; Kaauwen, van M.P.W.; Kramer, M.R.; Athanasiadis, I.N.

2017-01-01

Big Data has been seen as a remedy for the efficient management of the ever-increasing genomic data. In this paper, we investigate the use of Apache Spark to store and process Variant Calling Files (VCF) on a Hadoop cluster. We demonstrate Tomatula, a software tool for converting VCF files to Apache

High Technology Development and Creation of Experimental Industrial Area of High-Performance Precision Diamond Dress Tool Production for Engineering Needs and Import Substitution in Ukraine

Directory of Open Access Journals (Sweden)

N. Novikov

2013-09-01

Full Text Available Manufacturing design of high-precision diamond tool for special applications carried out at V. M Bakul Institute for Superhard Materials of NAS of Ukraine is described. Presented developments open up scientific and technological capabilities of special dress diamond tool production for mechanical engineering and substitution of imported tools at Ukrainian enterprises by home-produced.

Comparison of BrainTool to other UML modeling and model transformation tools

Science.gov (United States)

Nikiforova, Oksana; Gusarovs, Konstantins

2017-07-01

In the last 30 years there were numerous model generated software systems offered targeting problems with the development productivity and the resulting software quality. CASE tools developed due today's date are being advertised as having "complete code-generation capabilities". Nowadays the Object Management Group (OMG) is calling similar arguments in regards to the Unified Modeling Language (UML) models at different levels of abstraction. It is being said that software development automation using CASE tools enables significant level of automation. Actual today's CASE tools are usually offering a combination of several features starting with a model editor and a model repository for a traditional ones and ending with code generator (that could be using a scripting or domain-specific (DSL) language), transformation tool to produce the new artifacts from the manually created and transformation definition editor to define new transformations for the most advanced ones. Present paper contains the results of CASE tool (mainly UML editors) comparison against the level of the automation they are offering.

Model-based reasoning technology for the power industry

International Nuclear Information System (INIS)

Touchton, R.A.; Subramanyan, N.S.; Naser, J.A.

1991-01-01

This paper reports on model-based reasoning which refers to an expert system implementation methodology that uses a model of the system which is being reasoned about. Model-based representation and reasoning techniques offer many advantages and are highly suitable for domains where the individual components, their interconnection, and their behavior is well-known. Technology Applications, Inc. (TAI), under contract to the Electric Power Research Institute (EPRI), investigated the use of model-based reasoning in the power industry including the nuclear power industry. During this project, a model-based monitoring and diagnostic tool, called ProSys, was developed. Also, an alarm prioritization system was developed as a demonstration prototype

EUV tools: hydrogen gas purification and recovery strategies

Science.gov (United States)

Landoni, Cristian; Succi, Marco; Applegarth, Chuck; Riddle Vogt, Sarah

2015-03-01

The technological challenges that have been overcome to make extreme ultraviolet lithography (EUV) a reality have been enormous1. This vacuum driven technology poses significant purity challenges for the gases employed for purging and cleaning the scanner EUV chamber and source. Hydrogen, nitrogen, argon and ultra-high purity compressed dry air (UHPCDA) are the most common gases utilized at the scanner and source level. Purity requirements are tighter than for previous technology node tools. In addition, specifically for hydrogen, EUV tool users are facing not only gas purity challenges but also the need for safe disposal of the hydrogen at the tool outlet. Recovery, reuse or recycling strategies could mitigate the disposal process and reduce the overall tool cost of operation. This paper will review the types of purification technologies that are currently available to generate high purity hydrogen suitable for EUV applications. Advantages and disadvantages of each purification technology will be presented. Guidelines on how to select the most appropriate technology for each application and experimental conditions will be presented. A discussion of the most common approaches utilized at the facility level to operate EUV tools along with possible hydrogen recovery strategies will also be reported.

Technical Progress Report on Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

Energy Technology Data Exchange (ETDEWEB)

Bill Stanley; Patrick Gonzalez; Sandra Brown; Jenny Henman; Ben Poulter; Sarah Woodhouse Murdock; Neil Sampson; Tim Pearson; Sarah Walker; Zoe Kant; Miguel Calmon; Gilberto Tiepolo

2006-06-30

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st and July 30th 2006. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool. Work is being carried out in Brazil, Belize, Chile, Peru and the USA.

Learning Based Approach for Optimal Clustering of Distributed Program's Call Flow Graph

Science.gov (United States)

Abofathi, Yousef; Zarei, Bager; Parsa, Saeed

Optimal clustering of call flow graph for reaching maximum concurrency in execution of distributable components is one of the NP-Complete problems. Learning automatas (LAs) are search tools which are used for solving many NP-Complete problems. In this paper a learning based algorithm is proposed to optimal clustering of call flow graph and appropriate distributing of programs in network level. The algorithm uses learning feature of LAs to search in state space. It has been shown that the speed of reaching to solution increases remarkably using LA in search process, and it also prevents algorithm from being trapped in local minimums. Experimental results show the superiority of proposed algorithm over others.

Simulation-Based e-Learning Tools for Science,Engineering, and Technology Education(SimBeLT)

Science.gov (United States)

Davis, Doyle V.; Cherner, Y.

2006-12-01

The focus of Project SimBeLT is the research, development, testing, and dissemination of a new type of simulation-based integrated e-learning set of modules for two-year college technical and engineering curricula in the areas of thermodynamics, fluid physics, and fiber optics that can also be used in secondary schools and four-year colleges. A collection of sophisticated virtual labs is the core component of the SimBeLT modules. These labs will be designed to enhance the understanding of technical concepts and underlying fundamental principles of these topics, as well as to master certain performance based skills online. SimBeLT software will help educators to meet the National Science Education Standard that "learning science and technology is something that students do, not something that is done to them". A major component of Project SimBeLT is the development of multi-layered technology-oriented virtual labs that realistically mimic workplace-like environments. Dynamic data exchange between simulations will be implemented and links with instant instructional messages and data handling tools will be realized. A second important goal of Project SimBeLT labs is to bridge technical skills and scientific knowledge by enhancing the teaching and learning of specific scientific or engineering subjects. SimBeLT builds upon research and outcomes of interactive teaching strategies and tools developed through prior NSF funding (http://webphysics.nhctc.edu/compact/index.html) (Project SimBeLT is partially supported by a grant from the National Science Foundation DUE-0603277)

Information technology tools for curriculum development

NARCIS (Netherlands)

McKenney, Susan; Nieveen, N.M.; Strijker, A.; Voogt, Joke; Knezek, Gerald

2008-01-01

The widespread introduction and use of computers in the workplace began in the early 1990s. Since then, computer-based tools have been developed to support a myriad of task types, including the complex process of curriculum development. This chapter begins by briefly introducing two concepts that

Web Tools: The Second Generation

Science.gov (United States)

Pascopella, Angela

2008-01-01

Web 2.0 tools and technologies, or second generation tools, help districts to save time and money, and eliminate the need to transfer or move files back and forth across computers. Many Web 2.0 tools help students think critically and solve problems, which falls under the 21st-century skills. The second-generation tools are growing in popularity…

Mobile phone call data as a regional socio-economic proxy indicator.

Directory of Open Access Journals (Sweden)

Sanja Šćepanović

Full Text Available The advent of publishing anonymized call detail records opens the door for temporal and spatial human dynamics studies. Such studies, besides being useful for creating universal models for mobility patterns, could be also used for creating new socio-economic proxy indicators that will not rely only on the local or state institutions. In this paper, from the frequency of calls at different times of the day, in different small regional units (sub-prefectures in Côte d'Ivoire, we infer users' home and work sub-prefectures. This division of users enables us to analyze different mobility and calling patterns for the different regions. We then compare how those patterns correlate to the data from other sources, such as: news for particular events in the given period, census data, economic activity, poverty index, power plants and energy grid data. Our results show high correlation in many of the cases revealing the diversity of socio-economic insights that can be inferred using only mobile phone call data. The methods and the results may be particularly relevant to policy-makers engaged in poverty reduction initiatives as they can provide an affordable tool in the context of resource-constrained developing economies, such as Côte d'Ivoire's.

A comparison of text and technology based training tools to improve cognitive skills in older adults.

Science.gov (United States)

Power, Kevin; Kirwan, Grainne; Palmer, Marion

2011-01-01

Research has indicated that use of cognitive skills training tools can produce positive benefits with older adults. However, little research has compared the efficacy of technology-based interventions and more traditional, text-based interventions which are also available. This study aimed to investigate cognitive skills improvements experienced by 40 older adults using cognitive skills training tools. A Solomon 4 group design was employed to determine which intervention demonstrated the greatest improvement. Participants were asked to use the interventions for 5-10 minutes per day, over a period of 60 days. Pre and post-tests consisted of measures of numerical ability, self-reported memory and intelligence. Following training, older adults indicated significant improvements on numerical ability and intelligence regardless of intervention type. No improvement in selfreported memory was observed. This research provides a critical appraisal of brain training tools and can help point the way for future improvements in the area. Brain training improvements could lead to improved quality of life, and perhaps, have financial and independent living ramifications for older adults.

Perceiving a Calling, Living a Calling, and Job Satisfaction: Testing a Moderated, Multiple Mediator Model

Science.gov (United States)

Duffy, Ryan D.; Bott, Elizabeth M.; Allan, Blake A.; Torrey, Carrie L.; Dik, Bryan J.

2012-01-01

The current study examined the relation between perceiving a calling, living a calling, and job satisfaction among a diverse group of employed adults who completed an online survey (N = 201). Perceiving a calling and living a calling were positively correlated with career commitment, work meaning, and job satisfaction. Living a calling moderated…

Technology and commercial supply of components for the LHC project

CERN Document Server

Faugeras, Paul E

1998-01-01

After a brief reminder of the motives and the outline of the Large Hadron Collider (LHC) project, one will review the technology and the hardware to be built up. The LHC calls for High Tech innovation s in superconductivity, cryogenics with superfluid helium, ultra high vacuum, surface treatments, etc. which have to be transferred to Industry and produced on a large scale. It will also make extensi ve use of more conventional technology, but because of the intrinsic complexity of the machine and of the international nature of its funding and procurement sources, it will require sophisticated man agement and logistics tools to minimize costs and installation time. The planning for the whole project will be given with an indication of the nature and time schedule of the major contracts.

System approach as a tool for optimization of the dismantling technological process of NPP decommissioning

International Nuclear Information System (INIS)

Bylkin, B.K.; Shpitser, V.Ya.

1994-01-01

The concept of NPP unit decommissioning has been considered. Special attention was paid to the stage of dismantling of NPP unit equipment. Employment of systematic approach as a tool for optimization of dismantling processes permits formalizing manipulations with certified indices of quality and it permits an objective assessment of the dismantling technology level attained during designing as compared with the basic one. It seems appropriate to develop a basic project of NPP unit decommissioning as a technical means of planning, predicting and evaluating ecological and social aftereffects

Calling it what it is. Thesauri in the Flanders Heritage Agency: History, Importance, Use and Technological Advances

Science.gov (United States)

Mortier, S.; Van Daele, K.; Meganck, L.

2017-08-01

Heritage organizations in Flanders started using thesauri fairly recently compared to other countries. This paper starts with examining the historical use of thesauri and controlled vocabularies in computer systems by the Flemish Government dealing with immovable cultural heritage. Their evolution from simple, flat, controlled lists to actual thesauri with scope notes, hierarchical and equivalence relations and links to other thesauri will be discussed. An explanation will be provided for the evolution in our approach to controlled vocabularies, and how they radically changed querying and the way data is indexed in our systems. Technical challenges inherent to complex thesauri and how to overcome them will be outlined. These issues being solved, thesauri have become an essential feature of the Flanders Heritage inventory management system. The number of vocabularies rose over the years and became an essential tool for integrating heritage from different disciplines. As a final improvement, thesauri went from being a core part of one application (the inventory management system) to forming an essential part of a new general resource oriented system architecture for Flanders Heritage influenced by Linked Data. For this purpose, a generic SKOS based editor was created. Due to the SKOS model being generic enough to be used outside of Flanders Heritage, the decision was made early on to develop this editor as an open source project called Atramhasis and share it with the larger heritage world.

A non-parametric peak calling algorithm for DamID-Seq.

Directory of Open Access Journals (Sweden)

Renhua Li

Full Text Available Protein-DNA interactions play a significant role in gene regulation and expression. In order to identify transcription factor binding sites (TFBS of double sex (DSX-an important transcription factor in sex determination, we applied the DNA adenine methylation identification (DamID technology to the fat body tissue of Drosophila, followed by deep sequencing (DamID-Seq. One feature of DamID-Seq data is that induced adenine methylation signals are not assured to be symmetrically distributed at TFBS, which renders the existing peak calling algorithms for ChIP-Seq, including SPP and MACS, inappropriate for DamID-Seq data. This challenged us to develop a new algorithm for peak calling. A challenge in peaking calling based on sequence data is estimating the averaged behavior of background signals. We applied a bootstrap resampling method to short sequence reads in the control (Dam only. After data quality check and mapping reads to a reference genome, the peaking calling procedure compromises the following steps: 1 reads resampling; 2 reads scaling (normalization and computing signal-to-noise fold changes; 3 filtering; 4 Calling peaks based on a statistically significant threshold. This is a non-parametric method for peak calling (NPPC. We also used irreproducible discovery rate (IDR analysis, as well as ChIP-Seq data to compare the peaks called by the NPPC. We identified approximately 6,000 peaks for DSX, which point to 1,225 genes related to the fat body tissue difference between female and male Drosophila. Statistical evidence from IDR analysis indicated that these peaks are reproducible across biological replicates. In addition, these peaks are comparable to those identified by use of ChIP-Seq on S2 cells, in terms of peak number, location, and peaks width.

A non-parametric peak calling algorithm for DamID-Seq.

Science.gov (United States)

Li, Renhua; Hempel, Leonie U; Jiang, Tingbo

2015-01-01

Protein-DNA interactions play a significant role in gene regulation and expression. In order to identify transcription factor binding sites (TFBS) of double sex (DSX)-an important transcription factor in sex determination, we applied the DNA adenine methylation identification (DamID) technology to the fat body tissue of Drosophila, followed by deep sequencing (DamID-Seq). One feature of DamID-Seq data is that induced adenine methylation signals are not assured to be symmetrically distributed at TFBS, which renders the existing peak calling algorithms for ChIP-Seq, including SPP and MACS, inappropriate for DamID-Seq data. This challenged us to develop a new algorithm for peak calling. A challenge in peaking calling based on sequence data is estimating the averaged behavior of background signals. We applied a bootstrap resampling method to short sequence reads in the control (Dam only). After data quality check and mapping reads to a reference genome, the peaking calling procedure compromises the following steps: 1) reads resampling; 2) reads scaling (normalization) and computing signal-to-noise fold changes; 3) filtering; 4) Calling peaks based on a statistically significant threshold. This is a non-parametric method for peak calling (NPPC). We also used irreproducible discovery rate (IDR) analysis, as well as ChIP-Seq data to compare the peaks called by the NPPC. We identified approximately 6,000 peaks for DSX, which point to 1,225 genes related to the fat body tissue difference between female and male Drosophila. Statistical evidence from IDR analysis indicated that these peaks are reproducible across biological replicates. In addition, these peaks are comparable to those identified by use of ChIP-Seq on S2 cells, in terms of peak number, location, and peaks width.

Conduits to care: call lights and patients’ perceptions of communication

Directory of Open Access Journals (Sweden)

Montie M

2017-09-01

Full Text Available Mary Montie,1 Clayton Shuman,1 Jose Galinato,1 Lance Patak,2 Christine A Anderson,1 Marita G Titler1 1Department of Systems, Populations, and Leadership, School of Nursing, University of Michigan, Ann Arbor, MI, 2Department of Anesthesiology and Pain Medicine, Seattle Children’s Hospital, Seattle, WA, USA Background: Call light systems remain the primary means of hospitalized patients to initiate communication with their health care providers. Although there is vast amounts of literature discussing patient communication with their health care providers, few studies have explored patients’ perceptions concerning call light use and communication. The specific aim of this study was to solicit patients’ perceptions regarding their call light use and communication with nursing staff. Methods: Patients invited to this study met the following inclusion criteria: proficient in English, been hospitalized for at least 24 hours, aged ≥21 years, and able to communicate verbally (eg, not intubated. Thirty participants provided written informed consent, were enrolled in the study, and completed interviews. Results: Using qualitative descriptive methods, five major themes emerged from patients’ perceptions (namely; establishing connectivity, participant safety concerns, no separation: health care and the call light device, issues with the current call light, and participants’ perceptions of “nurse work”. Multiple minor themes supported these major themes. Data analysis utilized the constant comparative methods of Glaser and Strauss. Discussion: Findings from this study extend the knowledge of patients’ understanding of not only why inconsistencies occur between the call light and their nurses, but also why the call light is more than merely a device to initiate communication; rather, it is a direct conduit to their health care and its delivery. Keywords: nurse–patient communication, medical technology, quality of care, qualitative research

Patients' views and experiences of technology based self-management tools for the treatment of hypertension in the community: A qualitative study.

Science.gov (United States)

Glynn, Liam; Casey, Monica; Walsh, Jane; Hayes, Patrick S; Harte, Richard P; Heaney, David

2015-09-09

Patients with hypertension in the community frequently fail to meet treatment goals. The optimal way to organize and deliver care to hypertensive patients has not been clearly identified. The powerful on-board computing capacity of mobile devices, along with the unique relationship individuals have with newer technologies, suggests that they have the potential to influence behaviour. However, little is known regarding the views and experiences of patients using such technology to self-manage their hypertension and associated lifestyle behaviours. The aim of this study was to explore patients' views and experiences of using technology based self-management tools for the treatment of hypertension in the community. This focus group study was conducted with known hypertensive patients over 45 years of age who were recruited in a community setting in Ireland. Taped and transcribed semi-structured interviews with a purposeful sample involving 50 participants in six focus groups were used. Framework analysis was utilized to analyse the data. Four key inter-related themes emerged from the analysis: individualisation; trust; motivation; and communication. The globalisation of newer technologies has triggered many substantial and widespread behaviour changes within society, yet users are unique in their use and interactions with such technologies. Trust is an ever present issue in terms of its potential impact on engagement with healthcare providers and motivation around self-management. The potential ability of technology to influence motivation through carefully selected and tailored messaging and to facilitate a personalised flow of communication between patient and healthcare provider was highlighted. Newer technologies such as mobile devices and the internet have been embraced across the globe despite technological challenges and concerns regarding privacy and security. In the design and development of technology based self-management tools for the treatment of

CNNdel: Calling Structural Variations on Low Coverage Data Based on Convolutional Neural Networks

Directory of Open Access Journals (Sweden)

Jing Wang

2017-01-01

Full Text Available Many structural variations (SVs detection methods have been proposed due to the popularization of next-generation sequencing (NGS. These SV calling methods use different SV-property-dependent features; however, they all suffer from poor accuracy when running on low coverage sequences. The union of results from these tools achieves fairly high sensitivity but still produces low accuracy on low coverage sequence data. That is, these methods contain many false positives. In this paper, we present CNNdel, an approach for calling deletions from paired-end reads. CNNdel gathers SV candidates reported by multiple tools and then extracts features from aligned BAM files at the positions of candidates. With labeled feature-expressed candidates as a training set, CNNdel trains convolutional neural networks (CNNs to distinguish true unlabeled candidates from false ones. Results show that CNNdel works well with NGS reads from 26 low coverage genomes of the 1000 Genomes Project. The paper demonstrates that convolutional neural networks can automatically assign the priority of SV features and reduce the false positives efficaciously.

Behavioral Preferences for Individual Securities : The Case for Call Warrants and Call Options

NARCIS (Netherlands)

Ter Horst, J.R.; Veld, C.H.

2002-01-01

Since 1998, large investment banks have flooded the European capital markets with issues of call warrants.This has led to a unique situation in the Netherlands, where now call warrants, traded on the stock exchange, and long-term call options, traded on the options exchange, exist.Both entitle their

Call for Papers: Photonics in Switching

Science.gov (United States)

Wosinska, Lena; Glick, Madeleine

2006-04-01

Call for Papers: Photonics in Switching Guest Editors: Lena Wosinska, Royal Institute of Technology (KTH) / ICT Sweden Madeleine Glick, Intel Research, Cambridge, UK Technologies based on DWDM systems allow data transmission with bit rates of Tbit/s on a single fiber. To facilitate this enormous transmission volume, high-capacity and high-speed network nodes become inevitable in the optical network. Wideband switching, WDM switching, optical burst switching (OBS), and optical packet switching (OPS) are promising technologies for harnessing the bandwidth of WDM optical fiber networks in a highly flexible and efficient manner. As a number of key optical component technologies approach maturity, photonics in switching is becoming an increasingly attractive and practical solution for the next-generation of optical networks. The scope of this special issue is focused on the technology and architecture of optical switching nodes, including the architectural and algorithmic aspects of high-speed optical networks. Scope of Submission The scope of the papers includes, but is not limited to, the following topics: WDM node architectures Novel device technologies enabling photonics in switching, such as optical switch fabrics, optical memory, and wavelength conversion Routing protocols WDM switching and routing Quality of service Performance measurement and evaluation Next-generation optical networks: architecture, signaling, and control Traffic measurement and field trials Optical burst and packet switching OBS/OPS node architectures Burst/Packet scheduling and routing algorithms Contention resolution/avoidance strategies Services and applications for OBS/OPS (e.g., grid networks, storage-area networks, etc.) Burst assembly and ingress traffic shaping Hybrid OBS/TDM or OBS/wavelength routing Manuscript Submission To submit to this special issue, follow the normal procedure for submission to JON and select ``Photonics in Switching' in the features indicator of the online

Technological or tradicional tools for documents' corrections? A Case study in higher education

Directory of Open Access Journals (Sweden)

Zein Kallas

2012-09-01

Full Text Available Information and Communication Technology is playing an important role in assisting teachers in their activities. They became a more efficient, b more precise and c more comprehensive. The “Audio” ad is a clear illustration for this trend. Students’ acceptance of the “Audio” tool has been analysed and compared with the “traditional” correction and the “track change”. 57 students have answered a structured questionnaire using a web 2.0 application for creating an online form. Results show a high relative importance for the “Audio” correction (42.02% of, followed by the “track change” and the “traditional printed document” with 33.02% and 24.95% respectively.

Quantifying Traces of Tool Use: A Novel Morphometric Analysis of Damage Patterns on Percussive Tools

OpenAIRE

Caruana, Matthew V.; Carvalho, Susana; Braun, David R.; Presnyakova, Darya; Haslam, Michael; Archer, Will; Bobe, Rene; Harris, John W. K.

2014-01-01

Percussive technology continues to play an increasingly important role in understanding the evolution of tool use. Comparing the archaeological record with extractive foraging behaviors in nonhuman primates has focused on percussive implements as a key to investigating the origins of lithic technology. Despite this, archaeological approaches towards percussive tools have been obscured by a lack of standardized methodologies. Central to this issue have been the use of qualitative, non-diagnost...

78 FR 78838 - National Medal of Technology and Innovation Call for 2014 Nominations

Science.gov (United States)

2013-12-27

... DEPARTMENT OF COMMERCE United States Patent and Trademark Office [Docket No. PTO-C-2013-0060... Trademark Office, Commerce. ACTION: Notice and request for nominations. SUMMARY: The Department of Commerce..., environmental or social well-being through the promotion of technology, technological innovation, or the...

The Fishbone diagram to identify, systematize and analyze the sources of general purpose technologies

OpenAIRE

COCCIA, Mario

2017-01-01

Abstract. This study suggests the fishbone diagram for technological analysis. Fishbone diagram (also called Ishikawa diagrams or cause-and-effect diagrams) is a graphical technique to show the several causes of a specific event or phenomenon. In particular, a fishbone diagram (the shape is similar to a fish skeleton) is a common tool used for a cause and effect analysis to identify a complex interplay of causes for a specific problem or event. The fishbone diagram can be a comprehensive theo...

77 FR 32639 - HIT Standards Committee and HIT Policy Committee; Call for Nominations

Science.gov (United States)

2012-06-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee and HIT Policy Committee; Call for... Health Information Technology Policy Committee (HITPC). Name of Committees: HIT Standards Committee and HIT Policy Committee. General Function of the Committees: The HITSC is charged to provide...

Socially compatible technology management

International Nuclear Information System (INIS)

Tschiedel, R.

1989-01-01

The public has a critical eye on the impacts of technology, and there is a growing awareness of the social impacts in addition to health hazards and economic and ecologic impacts. 'Socially compatible technology management' is the magic formula frequently used which has emerged as a political demand in the course of the social controversy about the hazards of large-scale technology. It marks a position in the conflict between those who declare existing market and policy instruments to be sufficient regulatory tools, and those who understand the incidents ranging from inadequacy to desaster as a warning, and call for more precaution in decisions with an impact on the future. The concept of 'social compatibility' has to be given shape by elaborating criteria and methods for achieving this goal. The book shows that social compatibility cannot sufficiently be defined either as a quality of a technology and of a socio-technical system (acceptability), or as the willingness of the people concerned to accept a technology (acceptance). The investigation explains by means of empirical analysis and examples that participation is the only way to combine acceptability and acceptance into a socially compatibly designed technology. The leading theoretical and political formula developed for this purpose is 'acquisition'. To put it in a provocative way: Man has to learn to manage and master technical systems as if they were an integral part of themselves. Which means, man has to acquire the required knowledge and skill in the changing social structures, and the real power of disposal. Sociology of technology is a branch of research that can and should give support in the process of designing and managing technological systems in a way compatible with social needs. (orig./HP) [de

Pipeline integrity evaluation of oil pipelines using free-swimming acoustic technology

Energy Technology Data Exchange (ETDEWEB)

Ariaratnam, Samuel T. [Arizona State University, Tempe, Arizona (United States); Chandrasekaran, Muthu [Pure Technologies Limited, Calgary, AB (Canada)

2010-07-01

In the United States, the Pipeline and Hazardous Materials Safety Administration (PHMSA) funded a joint academy-industry research project, which developed and refined a free-swimming tool called SmartBall. The tool swims through the pipeline and gives results at a much lower cost than current leak detection methods, and it can detect leaks as small as 0.03 gpm of oil. GPS-synchronized above-ground loggers capture acoustic signals and record the passage of the tool through the pipeline. The tool is spherical and smaller than the pipe, through which it rolls silently; it can overcome obstacles that could otherwise make a pipeline unpiggable. SmartBall uses the great potential of acoustic detection, because when a pressurized product leaks from a pipe, it produces a distinctive acoustic signal that travels through the product; at the same time, it overcomes the problem caused by the very limited range of this signal. This technology can prevent enormous economic consequences such as a 50,000-gallon gasoline spill that happened in 2003 between Tucson and Phoenix.

Facing the future: a call for higher education in sleep technology.

Science.gov (United States)

Linley, Laura A

2017-12-01

The American Association of Sleep Technologists (AAST) is the national membership organization representing sleep technologists. The Board of Directors of the AAST recognizes that changes in the workforce will result in an increased need for technologists with a higher level of education. In order to meet the needs of members, the AAST has: (1) convened a summit of stakeholders to discuss the changing landscape for sleep technologists; (2) hosted an educational task force to provide ongoing communication and support; and (3) commissioned a survey of members, educators and employers to better define educational gaps and opportunities for sleep technologists. This report summarizes the results of the survey and provides a roadmap for future educational development. Demographic information highlights the diversity of those in the field of sleep technology. The majority of respondents agree that new technical skills will be needed to achieve competence in sleep technology in the near future, but also that clinical and communication skills will be critical in expanding the role of the sleep technologist in the sleep center. These findings led the AAST leadership to propose new directions for the AAST in serving the needs of its members and the field of sleep technology. This will include a continued focus on education, both basic and advanced, and development of diverse pathways for senior sleep technologists as well as those just entering the field. Copyright © 2017 Elsevier B.V. All rights reserved.

Science, technology, and pedagogy: Exploring secondary science teachers' effective uses of technology

Science.gov (United States)

Guzey, Siddika Selcen

Technology has become a vital part of our professional and personal lives. Today we cannot imagine living without many technological tools such as computers. For the last two decades technology has become inseparable from several areas, such as science. However, it has not been fully integrated into the field of education. The integration of technology in teaching and learning is still challenging even though there has been a historical growth of Internet access and available technology tools in schools (U.S. Department of Education, National Center for Education Statistics, 2006). Most teachers have not incorporated technology into their teaching for various reasons such as lack of knowledge of educational technology tools and having unfavorable beliefs about the effectiveness of technology on student learning. In this study, three beginning science teachers who have achieved successful technology integration were followed to investigate how their beliefs, knowledge, and identity contribute to their uses of technology in their classroom instruction. Extensive classroom observations and interviews were conducted. The findings demonstrate that the participating teachers are all intrinsically motivated to use technology in their teaching and this motivation allows them to enjoy using technology in their instruction and keeps them engaged in technology use. These teachers use a variety of technology tools in their instruction while also allowing students to use them, and they posit a belief set in favor of technology. The major findings of the study are displayed in a model which indicates that teachers' use of technology in classroom instruction was constructed jointly by their technology, pedagogy, and content knowledge; identity; beliefs; and the resources that are available to them and that the internalization of the technology use comes from reflection. The study has implications for teachers, teacher educators, and school administrators for successful technology

Sharing Family Life Information Through Video Calls and Other Information and Communication Technologies and the Association With Family Well-Being: Population-Based Survey.

Science.gov (United States)

Shen, Chen; Wang, Man Ping; Chu, Joanna Tw; Wan, Alice; Viswanath, Kasisomayajula; Chan, Sophia Siu Chee; Lam, Tai Hing

2017-11-23

The use of information and communication technologies (ICTs) for information sharing among family members is increasing dramatically. However, little is known about the associated factors and the influence on family well-being. The authors investigated the pattern and social determinants of family life information sharing with family and the associations of different methods of sharing with perceived family health, happiness, and harmony (3Hs) in Hong Kong, where mobile phone ownership and Internet access are among the most prevalent, easiest, and fastest in the world. A territory-wide population-based telephone survey was conducted from January to August 2016 on different methods of family life information (ie, information related to family communication, relationships with family members, emotion and stress management) sharing with family members, including face-to-face, phone, instant messaging (IM), social media sites, video calls, and email. Family well-being was assessed by three single items on perceived family health, happiness, and harmony, with higher scores indicating better family well-being. Adjusted prevalence ratios were used to assess the associations of sociodemographic factors with family life information sharing, and adjusted beta coefficients for family well-being. Of 2017 respondents, face-to-face was the most common method to share family life information (74.45%, 1502/2017), followed by IM (40.86%, 824/2017), phone (28.10%, 567/2017), social media sites (11.91%, 240/2017), video calls (5.89%, 119/2017), and email (5.48%, 111/2017). Younger age and higher education were associated with the use of any (at least one) method, face-to-face, IM, and social media sites for sharing family life information (all P for trend face-to-face, and IM (all P for trend face-to-face (beta=0.62, 95% CI 0.45-0.80) and video calls (beta=0.34, 95% CI 0.04-0.65). The combination of face-to-face and video calls was most strongly associated with a higher level of

Design Package for Fuel Retrieval System Fuel Handling Tool Modification

International Nuclear Information System (INIS)

TEDESCHI, D.J.

2000-01-01

This is a design package that contains the details for a modification to a tool used for moving fuel elements during loading of MCO Fuel Baskets for the Fuel Retrieval System. The tool is called the fuel handling tool (or stinger). This document contains requirements, development design information, tests, and test reports

Programming database tools for the casual user

International Nuclear Information System (INIS)

Katz, R.A; Griffiths, C.

1990-01-01

The AGS Distributed Control System (AGSDCS) uses a relational database management system (INTERBASE) for the storage of all data associated with the control of the particle accelerator complex. This includes the static data which describes the component devices of the complex, as well as data for application program startup and data records that are used in analysis. Due to licensing restraints, it was necessary to develop tools to allow programs requiring access to a database to be unconcerned whether or not they were running on a licensed node. An in-house database server program was written, using Apollo mailbox communication protocols, allowing application programs via calls to this server to access the interbase database. Initially, the tools used by the server to actually access the database were written using the GDML C host language interface. Through the evolutionary learning process these tools have been converted to Dynamic SQL. Additionally, these tools have been extracted from the exclusive province of the database server and placed in their own library. This enables application programs to use these same tools on a licensed node without using the database server and without having to modify the application code. The syntax of the C calls remain the same

Technology Transfer Challenges for High-Assurance Software Engineering Tools

Science.gov (United States)

Koga, Dennis (Technical Monitor); Penix, John; Markosian, Lawrence Z.

2003-01-01

In this paper, we describe our experience with the challenges thar we are currently facing in our effort to develop advanced software verification and validation tools. We categorize these challenges into several areas: cost benefits modeling, tool usability, customer application domain, and organizational issues. We provide examples of challenges in each area and identrfj, open research issues in areas which limit our ability to transfer high-assurance software engineering tools into practice.

Development of National Technology Audit Policy

Directory of Open Access Journals (Sweden)

Subiyanto Subiyanto

2017-07-01

Full Text Available The Laws have mandated implementation of technology audit, nevertheless such implementation needs an additional policy that is more technical. The concept of national audit technology policy shall make technology audit as a tool to ensure the benefit of technology application for society and technology advance for nation independency. This article discusses on technology audit policy concept especially infrastructure requirement, with emphasis on regulation, implementation tools, and related institution. The development of technology audit policy for national interest requires provision of mandatory audit implementation, accompanied by tools for developing technology auditor’s competence and technology audit institutional’s mechanism. To guide technology auditor’s competence, concept of national audit technology policy shall classify object of technology audit into product technology, production technology, and management of technology, accompanied by related parameters of technology performance evaluation.

Ophthalmic patients' utilization of technology and social media: an assessment to improve quality of care.

Science.gov (United States)

Aleo, Chelsea L; Hark, Lisa; Leiby, Benjamin; Dai, Yang; Murchison, Ann P; Martinez, Patricia; Haller, Julia A

2014-10-01

E-health tools have the potential to improve the quality of care for ophthalmic patients, many of whom have chronic conditions. However, little research has assessed ophthalmic patients' use or acceptance of technological devices and social media platforms for health-related purposes. The present study evaluated utilization of technological devices and social media platforms by eye clinic patients, as well as their willingness to receive health reminders through these technologies. A 31-item paper questionnaire was administered to eye clinic patients (n=843) at an urban, tertiary-care center. Questions focused on technology ownership, comfort levels, frequency of use, and preferences for receiving health reminders. Demographic data were also recorded. Eye clinic patients most commonly owned cellular phones (90%), landline phones (81%), and computers (80%). Overall, eye clinic patients preferred to receive health reminders through phone calls and e-mail and used these technologies frequently and with a high level of comfort. Less than 3% of patients preferred using social networking to receive health reminders. In addition, age was significantly associated with technology ownership, comfort level, and frequency of use (ptechnologies more frequently and with a higher comfort level (ptechnologies for appointment reminders, general eye and vision health information, asking urgent medical questions, and requesting prescription refills. Future controlled trials could further explore the efficacy of e-health tools for these purposes.

Data Quality Monitoring : Automatic MOnitoRing Environment (AMORE ) Web Administration Tool in ALICE Experiment

CERN Document Server

Nagi, Imre

2013-01-01

ALICE (A Large Ion Collider Experiment) is the heavy-ion detector designed to study the physics of strongly interacting matter and the quark-gluon plasma at the CERN Large Hadron Collider (LHC). The quality of the acquired data evolves over time depending on the status of the detectors, its components and the operating environment. To get an excellent performance of detector, all detector configurations have to be set perfectly so that the data-taking can be done in an optimal way. This report describes a new implementation of the administration tools of the ALICE’s DQM framework called AMORE (Automatic MonitoRing Environment) with web technologies.

An evaluation of virtual reality technology as an occupational therapy treatment tool in spinal cord injury rehabilitation

LENUS (Irish Health Repository)

McNamara, Angela Dr.

2006-01-01

The introduction of virtual reality (VR) games as an occupational therapy (OT) treatment tool is an attempt to use technology as purposeful activity that is more relevant to a modern patient population than traditional art and craft based activities. It is unclear however if VR games are suitable for clinical applications and the current project examines the usability of video-capture VR games in spinal cord injury (SCI) rehabilitation.\\r\

Rising calls for food safety. Radiation technology becomes a timely answer

International Nuclear Information System (INIS)

Loaharanu, Paisan

2001-01-01

Food safety has become an issue of high priority to many governments. Well publicized cases have shown that an outbreak of a major foodborne disease can have health, political, and economic consequences. Coupled with the increasing interest and publicity by the media, public awareness and concerns about food safety have reached a new height. Issues related to mad cow disease, and genetically modified food have attracted further attention and concern. Awareness of risks involving microbiological contamination of food has increased significantly in the past decade. There have been several major foodborne disease outbreaks caused by various pathogenic bacteria and parasites and widespread coverage by the media. The outbreaks have focused closer attention on food processing technologies to ensure the safety and quality of food. This article reports on developments for the application of irradiation technology for food processing, which has been approved for use in more than 40 countries

Natural language processing tools for computer assisted language learning

Directory of Open Access Journals (Sweden)

Vandeventer Faltin, Anne

2003-01-01

Full Text Available This paper illustrates the usefulness of natural language processing (NLP tools for computer assisted language learning (CALL through the presentation of three NLP tools integrated within a CALL software for French. These tools are (i a sentence structure viewer; (ii an error diagnosis system; and (iii a conjugation tool. The sentence structure viewer helps language learners grasp the structure of a sentence, by providing lexical and grammatical information. This information is derived from a deep syntactic analysis. Two different outputs are presented. The error diagnosis system is composed of a spell checker, a grammar checker, and a coherence checker. The spell checker makes use of alpha-codes, phonological reinterpretation, and some ad hoc rules to provide correction proposals. The grammar checker employs constraint relaxation and phonological reinterpretation as diagnosis techniques. The coherence checker compares the underlying "semantic" structures of a stored answer and of the learners' input to detect semantic discrepancies. The conjugation tool is a resource with enhanced capabilities when put on an electronic format, enabling searches from inflected and ambiguous verb forms.

Assistive Technology

Science.gov (United States)

... Page Resize Text Printer Friendly Online Chat Assistive Technology Assistive technology (AT) is any service or tool that helps ... be difficult or impossible. For older adults, such technology may be a walker to improve mobility or ...

Exploring cardinality in the era of touchscreen-based technology

Science.gov (United States)

Sedaghatjou, Mina; Campbell, Stephen R.

2017-11-01

This paper explores how a young child (56 m) builds an understanding of the cardinality principle through communicative, touchscreen-based activities involving talk, gesture and body engagement working via multimodal, touchscreen interface using contemporary mobile technology. Drawing upon Nemirovsky's perceptuomotor integration theoretical lens and other foundational aspects of Husserlian phenomenology, we present an in-depth case study of a preschool child developing mathematical expertise and tool fluency using an iPad application called TouchCounts to operate with cardinal numbers. Overall, this study demonstrates that the one-on-one multimodal touch, sight and auditory feedback via a touchscreen device can serve to assist in a child's development of cardinality.

Revisiting Information Technology tools serving authorship and editorship: a case-guided tutorial to statistical analysis and plagiarism detection

Science.gov (United States)

Bamidis, P D; Lithari, C; Konstantinidis, S T

2010-01-01

With the number of scientific papers published in journals, conference proceedings, and international literature ever increasing, authors and reviewers are not only facilitated with an abundance of information, but unfortunately continuously confronted with risks associated with the erroneous copy of another's material. In parallel, Information Communication Technology (ICT) tools provide to researchers novel and continuously more effective ways to analyze and present their work. Software tools regarding statistical analysis offer scientists the chance to validate their work and enhance the quality of published papers. Moreover, from the reviewers and the editor's perspective, it is now possible to ensure the (text-content) originality of a scientific article with automated software tools for plagiarism detection. In this paper, we provide a step-bystep demonstration of two categories of tools, namely, statistical analysis and plagiarism detection. The aim is not to come up with a specific tool recommendation, but rather to provide useful guidelines on the proper use and efficiency of either category of tools. In the context of this special issue, this paper offers a useful tutorial to specific problems concerned with scientific writing and review discourse. A specific neuroscience experimental case example is utilized to illustrate the young researcher's statistical analysis burden, while a test scenario is purpose-built using open access journal articles to exemplify the use and comparative outputs of seven plagiarism detection software pieces. PMID:21487489

Revisiting Information Technology tools serving authorship and editorship: a case-guided tutorial to statistical analysis and plagiarism detection.

Science.gov (United States)

Bamidis, P D; Lithari, C; Konstantinidis, S T

2010-12-01

With the number of scientific papers published in journals, conference proceedings, and international literature ever increasing, authors and reviewers are not only facilitated with an abundance of information, but unfortunately continuously confronted with risks associated with the erroneous copy of another's material. In parallel, Information Communication Technology (ICT) tools provide to researchers novel and continuously more effective ways to analyze and present their work. Software tools regarding statistical analysis offer scientists the chance to validate their work and enhance the quality of published papers. Moreover, from the reviewers and the editor's perspective, it is now possible to ensure the (text-content) originality of a scientific article with automated software tools for plagiarism detection. In this paper, we provide a step-bystep demonstration of two categories of tools, namely, statistical analysis and plagiarism detection. The aim is not to come up with a specific tool recommendation, but rather to provide useful guidelines on the proper use and efficiency of either category of tools. In the context of this special issue, this paper offers a useful tutorial to specific problems concerned with scientific writing and review discourse. A specific neuroscience experimental case example is utilized to illustrate the young researcher's statistical analysis burden, while a test scenario is purpose-built using open access journal articles to exemplify the use and comparative outputs of seven plagiarism detection software pieces.

System-level tools and reconfigurable computing for next-generation HWIL systems

Science.gov (United States)

Stark, Derek; McAulay, Derek; Cantle, Allan J.; Devlin, Malachy

2001-08-01

Previous work has been presented on the creation of computing architectures called DIME, which addressed the particular computing demands of hardware in the loop systems. These demands include low latency, high data rates and interfacing. While it is essential to have a capable platform for handling and processing of the data streams, the tools must also complement this so that a system's engineer is able to construct their final system. The paper will present the work in the area of integration of system level design tools, such as MATLAB and SIMULINK, with a reconfigurable computing platform. This will demonstrate how algorithms can be implemented and simulated in a familiar rapid application development environment before they are automatically transposed for downloading directly to the computing platform. This complements the established control tools, which handle the configuration and control of the processing systems leading to a tool suite for system development and implementation. As the development tools have evolved the core-processing platform has also been enhanced. These improved platforms are based on dynamically reconfigurable computing, utilizing FPGA technologies, and parallel processing methods that more than double the performance and data bandwidth capabilities. This offers support for the processing of images in Infrared Scene Projectors with 1024 X 1024 resolutions at 400 Hz frame rates. The processing elements will be using the latest generation of FPGAs, which implies that the presented systems will be rated in terms of Tera (1012) operations per second.

Development of a new software tool, based on ANN technology, in neutron spectrometry and dosimetry research

International Nuclear Information System (INIS)

Ortiz R, J.M.; Martinez B, M.R.; Vega C, H.R.

2007-01-01

Artificial Intelligence is a branch of study which enhances the capability of computers by giving them human-like intelligence. The brain architecture has been extensively studied and attempts have been made to emulate it as in the Artificial Neural Network technology. A large variety of neural network architectures have been developed and they have gained wide-spread popularity over the last few decades. Their application is considered as a substitute for many classical techniques that have been used for many years, as in the case of neutron spectrometry and dosimetry research areas. In previous works, a new approach called Robust Design of Artificial Neural network was applied to build an ANN topology capable to solve the neutron spectrometry and dosimetry problems within the Mat lab programming environment. In this work, the knowledge stored at Mat lab ANN's synaptic weights was extracted in order to develop for first time a customized software application based on ANN technology, which is proposed to be used in the neutron spectrometry and simultaneous dosimetry fields. (Author)

Development of a new software tool, based on ANN technology, in neutron spectrometry and dosimetry research