WorldWideScience

Sample records for technology today electronic

  1. Connected minds technology and today's learners

    CERN Document Server

    Pedrò, Francesc

    2012-01-01

    In all OECD countries, digital media and connectedness are integral to the lives of todays learners. It is often claimed that these learners are ""new millennium learners"", or ""digital natives"", who have different expectations about education. This book contributes to the debate about the effects of technology attachment and connectedness on todays learners, and their expectations about teaching. The book sets out to answer the following questions: Can the claim that todays students are ""new millenium learners"" or ""digital natives be sustained empirically? Is there consistent research evidence demonstrating the effects of technology on cognitive development, social values, and learning expectations? What are the implications for educational policy and practice?

  2. Digital video technology, today and tomorrow

    Science.gov (United States)

    Liberman, J.

    1994-10-01

    Digital video is probably computing's fastest moving technology today. Just three years ago, the zenith of digital video technology on the PC was the successful marriage of digital text and graphics with analog audio and video by means of expensive analog laser disc players and video overlay boards. The state of the art involves two different approaches to fully digital video on computers: hardware-assisted and software-only solutions.

  3. The Electronic Library Workstation--Today.

    Science.gov (United States)

    Nolte, James

    1990-01-01

    Describes the components--hardware, software and applications, CD-ROM and online reference resources, and telecommunications links--of an electronic library workstation in use at Clarkson University (Potsdam, New York). Data manipulation, a hypothetical research scenario, and recommended workstation capabilities are also discussed. (MES)

  4. Principal Challenges Facing Electronic Records Management in Federal Agencies Today.

    Science.gov (United States)

    Patterson, Giovanna; Sprehe, J. Timothy

    2002-01-01

    Discusses electronic records management in the federal government. Highlights include managing electronic mail; information technology planning, systems design, and architecture; updating conventional records management; integrating electronic records management with other information technology systems; challenges of end-user training; business…

  5. Today's Training in the High Technology Arena

    Science.gov (United States)

    Baylis, William T.

    1995-01-01

    To keep in tune with the rapidly changing 'Hardware' technology, it is imperative that all of the supporting components of a program's efforts reflect these increases in technology. To maintain a work force that keeps in tune with the ever increasing technology base, training needs to remain a major consideration in all types of organizations. This paper focuses on the area of training and education and suggests a reasonable, cost effective alternative to carrying the entire burden of developing, training and maintaining a workforce in a rapidly changing, highly technological environment.

  6. PV Technology for Today and Tomorrow (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, S.

    2010-08-13

    The presentation was given as a webinar to the Solar Instructor Training Network on August 13, 2010. It summarizes the three primary types of photovoltaic technologies, why the three approaches are useful and some advantages and disadvantages of each approach. At the end is an answer to a question that was asked.

  7. Technology Issues in Indian Country Today.

    Science.gov (United States)

    Warner, Linda Sue

    1998-01-01

    Examines legal and ethical issues related to Internet use and use of other technologies in Native American communities. Discusses conflict between federal telecommunications policy and the principles of tribal sovereignty, cultural appropriation, intellectual property rights, gatekeeping to limit access to traditional knowledge, and effects of…

  8. Preservation of Lantern Slides for Use in Today's Technology

    Science.gov (United States)

    Hillier, A. S.

    2007-10-01

    Lantern slides will keep a long time, which is a good quality for preservation. However, as I have found, they break. Unless there is a lantern slide projector available, there is no way to show these valuable assets to others. This poster will explain my project to bring these pictures to life, to use them in education projects, and to simply show a bit of history to an attentive audience. With today's technology they can be placed on computers and stored more easily and be a joy to all.

  9. Reverse osmosis desalination: water sources, technology, and today's challenges.

    Science.gov (United States)

    Greenlee, Lauren F; Lawler, Desmond F; Freeman, Benny D; Marrot, Benoit; Moulin, Philippe

    2009-05-01

    Reverse osmosis membrane technology has developed over the past 40 years to a 44% share in world desalting production capacity, and an 80% share in the total number of desalination plants installed worldwide. The use of membrane desalination has increased as materials have improved and costs have decreased. Today, reverse osmosis membranes are the leading technology for new desalination installations, and they are applied to a variety of salt water resources using tailored pretreatment and membrane system design. Two distinct branches of reverse osmosis desalination have emerged: seawater reverse osmosis and brackish water reverse osmosis. Differences between the two water sources, including foulants, salinity, waste brine (concentrate) disposal options, and plant location, have created significant differences in process development, implementation, and key technical problems. Pretreatment options are similar for both types of reverse osmosis and depend on the specific components of the water source. Both brackish water and seawater reverse osmosis (RO) will continue to be used worldwide; new technology in energy recovery and renewable energy, as well as innovative plant design, will allow greater use of desalination for inland and rural communities, while providing more affordable water for large coastal cities. A wide variety of research and general information on RO desalination is available; however, a direct comparison of seawater and brackish water RO systems is necessary to highlight similarities and differences in process development. This article brings to light key parameters of an RO process and process modifications due to feed water characteristics.

  10. Electron tunnel sensor technology

    Science.gov (United States)

    Waltman, S. B.; Kaiser, W. J.

    1989-01-01

    The recent development of Scanning Tunneling Microscopy technology allows the application of electron tunneling to position detectors for the first time. The vacuum tunnel junction is one of the most sensitive position detection mechanisms available. It is also compact, simple, and requires little power. A prototype accelerometer based on electron tunneling, and other sensor applications of this promising new technology are described.

  11. The Next Technology Revolution - Nano Electronic Technology

    Science.gov (United States)

    Turlik, Iwona

    2004-03-01

    Nanotechnology is a revolutionary engine that will engender enormous changes in a vast majority of today's industries and markets, while potentially creating whole new industries. The impact of nanotechnology is particularly significant in the electronics industry, which is constantly driven by the need for higher performance, increased functionality, smaller size and lower cost. Nanotechnology can influence many of the hundreds of components that are typically assembled to manufacture modern electronic devices. Motorola manufactures electronics for a wide range of industries and communication products. In this presentation, the typical components of a cellular phone are outlined and technology requirements for future products, the customer benefits, and the potential impact of nanotechnology on many of the components are discussed. Technology needs include reliable materials supply, processes for high volume production, experimental and simulation tools, etc. For example, even routine procedures such as failure characterization may require the development of new tools for investigating nano-scale phenomena. Business needs include the development of an effective, high volume supply chain for nano-materials and devices, disruptive product platforms, and visible performance impact on the end consumer. An equally significant long-term industry need is the availability of science and engineering graduates with a multidisciplinary focus and a deep understanding of the fundamentals of nano-technology, that can harness the technology to create revolutionary products.

  12. The impact of information technology on managed care pharmacy: today and tomorrow.

    Science.gov (United States)

    Hillblom, Douglas; Schueth, Anthony; Robertson, Scott M; Topor, Laura; Low, Greg

    2014-11-01

    Understanding the use of health information technology (HIT) and its implications is crucial for the future of managed care pharmacy. Information is the cornerstone of providing and managing care, and the ability to exchange data is easier and more complicated than ever before. In this commentary, a subset of the Academy of Managed Care Pharmacy Healthcare Information Technology Advisory Council addresses how HIT supports managed care today and its anticipated evolution, with a focus on quality, patient safety, communication, and efficiency. Among the tools and functions reviewed are electronic health records, electronic prescribing, health information exchange, electronic prior authorization, pharmacists as care team members, formularies, prescription drug abuse, and policy levers to address these issues. 

  13. Electronic equipment packaging technology

    CERN Document Server

    Ginsberg, Gerald L

    1992-01-01

    The last twenty years have seen major advances in the electronics industry. Perhaps the most significant aspect of these advances has been the significant role that electronic equipment plays in almost all product markets. Even though electronic equipment is used in a broad base of applications, many future applications have yet to be conceived. This versatility of electron­ ics has been brought about primarily by the significant advances that have been made in integrated circuit technology. The electronic product user is rarely aware of the integrated circuits within the equipment. However, the user is often very aware of the size, weight, mod­ ularity, maintainability, aesthetics, and human interface features of the product. In fact, these are aspects of the products that often are instrumental in deter­ mining its success or failure in the marketplace. Optimizing these and other product features is the primary role of Electronic Equipment Packaging Technology. As the electronics industry continues to pr...

  14. Digital video technology - today and tomorrow: 11th office information technology conference

    Energy Technology Data Exchange (ETDEWEB)

    Liberman, J.

    1994-10-01

    Digital video is probably computing`s fastest moving technology today. Just three years ago, the zenith of digital video technology on the PC was the successful marriage of digital text and graphics with analog audio and video by means of expensive analog laser disc players and video overlay boards. The state of the art involves two different approaches to fully digital video on computers: hardware-assisted and software-only solutions.

  15. Electron Technology: ELTE 2016

    Science.gov (United States)

    Pisarkiewicz, Tadeusz; Kucewicz, Wojciech

    2016-12-01

    In this paper we present a review of research results and technical accomplishments presented by researchers from technical universities, governmental institutes and research companies during the XIIth Scientific Conference Electron Technology, ELTE 2016. This review is based on materials presented at four topical conference sessions: Microelectronics and Nanoelectronics, Photonics, Materials and Technologies, and Microsystems and also on materials presented by invited speakers at two dedicated sessions. Oral sessions were accompanied by the poster sessions. In effect about 50 papers gathered in this volume reflect the topics discussed at the Conference. A short description of technological and measurement possibilities in the laboratories of Academic Centre for Materials and Nanotechnology and also in the Department of Electronics of the Faculty of Computer Science, Electronics and Telecommunications AGH UST are given.

  16. Mathematics for electronic technology

    CERN Document Server

    Howson, D P

    1975-01-01

    Mathematics for Electronic Technology is a nine-chapter book that begins with the elucidation of the introductory concepts related to use of mathematics in electronic engineering, including differentiation, integration, partial differentiation, infinite series, vectors, vector algebra, and surface, volume and line integrals. Subsequent chapters explore the determinants, differential equations, matrix analysis, complex variable, topography, graph theory, and numerical analysis used in this field. The use of Fourier method for harmonic analysis and the Laplace transform is also described. The ma

  17. Electronic Waste: A Growing Concern in Today's Environment

    Directory of Open Access Journals (Sweden)

    M. Khurrum S. Bhutta

    2011-01-01

    Full Text Available Over the recent past, the global market of electrical and electronic equipment (EEE has grown exponentially, while the lifespan of these products has become increasingly shorter. More of these products are ending up in rubbish dumps and recycling centers, posing a new challenge to policy makers. The purpose of this paper is to provide a review of the e-Waste problem and to put forward an estimation technique to calculate the growth of e-Waste.

  18. Epochal problems of philosophy of education, today. Technology, posthuman, neuroscience

    Directory of Open Access Journals (Sweden)

    Franco Cambi

    2014-11-01

    Full Text Available The article presents three crucial aspects of philosophical research in pedagogy: the role of technology, the post-human, the relation with neurosciences. These aspects should be rethought critically, always.

  19. Epochal problems of philosophy of education, today. Technology, posthuman, neuroscience

    OpenAIRE

    Franco Cambi

    2014-01-01

    The article presents three crucial aspects of philosophical research in pedagogy: the role of technology, the post-human, the relation with neurosciences. These aspects should be rethought critically, always.

  20. Electronic components and technology

    CERN Document Server

    Sangwine, Stephen

    2007-01-01

    Most introductory textbooks in electronics focus on the theory while leaving the practical aspects to be covered in laboratory courses. However, the sooner such matters are introduced, the better able students will be to include such important concerns as parasitic effects and reliability at the very earliest stages of design. This philosophy has kept Electronic Components and Technology thriving for two decades, and this completely updated third edition continues the approach with a more international outlook.Not only does this textbook introduce the properties, behavior, fabrication, and use

  1. Technology (AT) Reutilization (Reuse): What We Know Today

    Science.gov (United States)

    Kniskern, Joy; Phillips, Carolyn P.; Patterson, Thomas

    2008-01-01

    The history, scope, and evolving definitions of assistive technology reutilization activities, from both grassroots and legislative perspective, are discussed. A national classification system of AT reuse activities and data gathered from several national surveys of AT reutilization programs using this classification approach are presented. The…

  2. Clean coal technology deployment: From today into the next millennium

    Energy Technology Data Exchange (ETDEWEB)

    Papay, L.T.; Trocki, L.K.; McKinsey, R.R. [Bechtel Technology and Consulting, San Francisco, CA (United States)

    1997-12-31

    The Department of Energy`s clean coal technology (CCT) program succeeded in developing more efficient, cleaner, coal-fired electricity options. The Department and its private partners succeeded in the demonstration of CCT -- a major feat that required more than a decade of commitment between them. As with many large-scale capital developments and changes, the market can shift dramatically over the course of the development process. The CCT program was undertaken in an era of unstable oil and gas prices, concern over acid rain, and guaranteed markets for power suppliers. Regulations, fuel prices, emergency of competing technologies, and institutional factors are all affecting the outlook for CCT deployment. The authors identify the major barriers to CCT deployment and then introduce some possible means to surmount the barriers.

  3. Energizing the future: New battery technology a reality today

    Science.gov (United States)

    Chase, Henry; Bitterly, Jack; Federici, Al

    1997-04-01

    The U.S. Flywheel Systems' flywheel energy storage system could be the answer to a critical question: How do we replace conventional chemical batteries with a more-efficient system that lasts longer and is non-polluting? The new product, which has a virtually unlimited life expectancy, has a storage capacity four times greater per pound than conventional chemical batteries. USFS designed and built each component of the system—from the specially wound carbon fiber wheel, the magnetic bearing, the motor/generator, and the electronic control. The flywheel is designed to spin at speeds up to 100,000 rpm and deliver about 50 horsepower using a proprietary high-speed, high-power-density motor/generator that is the size of a typical coffee mug. Some of the important markets and applications for the flywheel storage system include electric vehicles, back-up power supply, peak power smoothing, satellite energy storage systems, and locomotive power.

  4. Managing electronic records methods, best practices, and technologies

    CERN Document Server

    Smallwood, Robert F

    2013-01-01

    The ultimate guide to electronic records management, featuring a collaboration of expert practitioners including over 400 cited references documenting today's global trends, standards, and best practices Nearly all business records created today are electronic, and are increasing in number at breathtaking rates, yet most organizations do not have the policies and technologies in place to effectively organize, search, protect, preserve, and produce these records. Authored by an internationally recognized expert on e-records in collaboration with leading subject matter experts worldwide

  5. Use of Electronic Technologies by People with Intellectual Disabilities

    Science.gov (United States)

    Carey, Allison C.; Friedman, Mark G.; Bryen, Diane Nelson

    2005-01-01

    Today's electronic technologies, including computers, cell phones, Internet, and electronic organizers, hold great promise for individuals with intellectual disabilities, yet little research has been conducted to explore patterns of use among this population. Drawing upon a survey of 83 adults with intellectual disabilities, we examined factors…

  6. Technology of Electronic Signatur

    OpenAIRE

    2004-01-01

    An electronic signature uses a hash of message and an asymetrical algorithm of encryption for its generation. During verification of message on receiver side the hash of original message must be identical with the hash of received message. Electronic message is secured autentization of author and integrity of transmission date. By electronic signature it is possible to sign everything what is in digital form.

  7. Technology of Electronic Signatur

    Directory of Open Access Journals (Sweden)

    Jaroslav Sadovsky

    2004-01-01

    Full Text Available An electronic signature uses a hash of message and an asymetrical algorithm of encryption for its generation. During verification of message on receiver side the hash of original message must be identical with the hash of received message. Electronic message is secured autentization of author and integrity of transmission date. By electronic signature it is possible to sign everything what is in digital form.

  8. Neuro-Linguistic Programming: Human Technology for Today’s Air Force.

    Science.gov (United States)

    1986-04-01

    Part III, pp. 4-5. ’ 26. Ibid, p. 6. 27. Donald W. McCormick, " Neurolinguistic Programming : A Resource Guide and Review of the Research, The 1984...Carol Johnson, " Neurolinguistic Programming --Mystique or Mistake?" Army Organizational Effectiveness Journal, No. 1, 1985, pp. 74-80. 29. Dilts...AD-RI67 836 NEURO-LINGUISTIC PROGRAMMING : HUHAN TECHNOLOGY FOR / TODAY’S AIR FORCEMU AIR COMMAND ANM STAFF COLL NAXHELL AFB AL J B CAULFIELD APR 86

  9. Advanced Electronic Technology.

    Science.gov (United States)

    1980-05-15

    Silicon De- D.,I. Silversmith Solid State Technol. 23, 88 vices Formed by Ion Iniplanta- 1. W. Mountain (1980) tion and Laser Annealing S.C. Munroe M...J. Silversmith Photodeposition R. M. Osgood, Jr. 5075 Picosecond Optical Sampling H. A. Haus* Accepted by IEEE J. Quantum S.T. Kirsch Electron. K

  10. Benchmarking foreign electronics technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bostian, C.W.; Hodges, D.A.; Leachman, R.C.; Sheridan, T.B.; Tsang, W.T.; White, R.M.

    1994-12-01

    This report has been drafted in response to a request from the Japanese Technology Evaluation Center`s (JTEC) Panel on Benchmarking Select Technologies. Since April 1991, the Competitive Semiconductor Manufacturing (CSM) Program at the University of California at Berkeley has been engaged in a detailed study of quality, productivity, and competitiveness in semiconductor manufacturing worldwide. The program is a joint activity of the College of Engineering, the Haas School of Business, and the Berkeley Roundtable on the International Economy, under sponsorship of the Alfred P. Sloan Foundation, and with the cooperation of semiconductor producers from Asia, Europe and the United States. Professors David A. Hodges and Robert C. Leachman are the project`s Co-Directors. The present report for JTEC is primarily based on data and analysis drawn from that continuing program. The CSM program is being conducted by faculty, graduate students and research staff from UC Berkeley`s Schools of Engineering and Business, and Department of Economics. Many of the participating firms are represented on the program`s Industry Advisory Board. The Board played an important role in defining the research agenda. A pilot study was conducted in 1991 with the cooperation of three semiconductor plants. The research plan and survey documents were thereby refined. The main phase of the CSM benchmarking study began in mid-1992 and will continue at least through 1997. reports are presented on the manufacture of integrated circuits; data storage; wireless technology; human-machine interfaces; and optoelectronics. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  11. Space Shuttle Main Engine Joint Data List Applying Today's Desktop Technologies to Facilitate Engine Processing

    Science.gov (United States)

    Jacobs, Kenneth; Drobnick, John; Krell, Don; Neuhart, Terry; McCool, A. (Technical Monitor)

    2001-01-01

    electronic manual that contains all the required data and illustrations in expanded view format using standard PC products (Word, Excel, PDF, Photoshop). The logistics of accurately releasing this information to field personnel was greatly enhanced via the utilization of common office products to produce a more user-friendly format than was originally developed under contract to NASA. This was done without reinventing the system, which would be cost prohibitive on a program of this maturity. The brunt of the joint part tracking is done within the logistics organization and disseminated to all field sites, without duplicating effort at each site. The JDL is easily accessible across the country via the NASA intranet directly at the SSME workstand. The advent of this logistics data product has greatly enhanced the reliability of tracking dynamic changes to the SSME and greatly reduces engineering change turnaround time and potential for errors. Since the inception of the JDL system in 1997, no discrepant parts have propagated to engine assembly operations. This presentation focuses on the challenges overcome and the techniques used to apply today's desktop technologies to an existing logistics data source.

  12. Extension Learners' Use of Electronic Technology

    Science.gov (United States)

    Guenthner, Joseph F.; Swan, Benjamin G.

    2011-01-01

    Extension clientele use electronic technology for entertainment, communication, and business. Educational programs that use electronic technology can enhance learning. To learn more about use of electronic technology among Extension clientele, we surveyed 80 university students and 135 potato farmers. We found that the farmers were likely to use…

  13. Special Technologies Related to Electron Beam Welding

    Institute of Scientific and Technical Information of China (English)

    Zhao; Haiyan; Cai; Zhipeng; Wang; Xichang

    2007-01-01

    In order to improve the manufacturing quality of electron beam welding,some technologies are developed by using the special features of electron beam.Comparing with the conventional electron beam welding,the usage of multi-beam technology and micro-beam technology are introduced.In addition.the development of beam diagnostic system is also presented.

  14. The social, moral, ethical, legal and political implications of today's biological technologies: an Indian point of view.

    Science.gov (United States)

    Bhargava, Pushpa M

    2006-01-01

    The last 50 years have seen an increasing emphasis on ethical, moral, social, legal, political and economic implications of science for reasons that are discussed in this article. Biotechnology has been no exception to this trend. Areas of biotechnology where the above implications have been important, are briefly described. Ethical and related issues in today's biology-based technologies are discussed with special reference to India. Examples of technological exploitation within a country, or of one country by another, using modern biology-based technologies are given. The possible implications of one new and emerging biology-based technology are discussed. It is concluded that a well-informed and knowledgeable society is the only assured insurance against possible misuse of biology-based technologies of today and tomorrow, including their use for the exploitation of people. The recent decision of the Prime Minister of India to set up a National Knowledge Commission is mentioned in this context.

  15. Cooling Technology for Electronic Computers

    Science.gov (United States)

    Nakayama, Wataru

    The rapid growth of data processing speed in computers has been sustained by the advances in cooling technology. This article first presents a review of the published data of heat loads in recent Japanese large-scale computers. The survey indicates that, since around 1980, the high-level integration of microelectronic circuits has brought about almost four fold increase in the power dissipation from logic chips. The integration also has invited the evolutions of multichip modules and new schemes of electronic interconnections. Forced convection air-cooling and liquid cooling coupled with thermal connectors are discussed with reference to the designs employed in actual computers. More advanced cooling schemes are also discussed. Finally, the importance of thermal environmental control of computer rooms is emphasized.

  16. Universal Design for Learning and Assistive Technology: Leadership Considerations for Promoting Inclusive Education in Today's Secondary Schools

    Science.gov (United States)

    Messinger-Willman, Jaime; Marino, Matthew T.

    2010-01-01

    The increased number of students with learning disabilities in general education secondary school classrooms presents complex challenges for today's educators. This article describes how the Universal Design for Learning theoretical framework can be used with assistive technology to enhance educational opportunities for secondary students with…

  17. Attitude towards assisted reproductive technology - surrogacy at todays young women (Qualitative research)

    OpenAIRE

    LAVIČKOVÁ, Karolina

    2015-01-01

    The Bachelor thesis describes the implementation of surrogate maternity. It observe at it from the ethical and legal perspective. The research shows the attitude of today´s young women to the substitute maternity.

  18. Attitude towards assisted reproductive technology - surrogacy at todays young women (Qualitative research)

    OpenAIRE

    LAVIČKOVÁ, Karolina

    2015-01-01

    The Bachelor thesis describes the implementation of surrogate maternity. It observe at it from the ethical and legal perspective. The research shows the attitude of today´s young women to the substitute maternity.

  19. New Electronic Technologies for Facilitating Differentiated Instruction

    Science.gov (United States)

    Scalise, Kathleen

    2009-01-01

    With electronic technologies, differentiated instruction has the same meaning as in traditional instruction, but different tools are available for teachers to help students learn. Electronic technologies for differentiated instruction can add powerful new types of media inclusion, levels of interactivity, and response actions. This rapidly…

  20. Polymer electronics a flexible technology

    CERN Document Server

    Technology, Rapra

    2009-01-01

    The worldwide market for polymer electronic products has been estimated to be worth up to £15 billion by 2015 and the opportunity for new markets could be as high as £125 billion by 2025.'The rapid development of polymer electronics has revealed the possibility for transforming the electronics market by offering lighter, flexible and more cost effective alternatives to conventional materials and products. With applications ranging from printed, flexible conductors and novel semiconductor components to intelligent labels and large area displays and solar panels, products that were previously un

  1. Technology in Today's Classroom: Are You a Tech-Savvy Teacher?

    Science.gov (United States)

    Hicks, Stephanie Diamond

    2011-01-01

    Technology has changed the way the world functions on a day-to-day basis, but what about education? Education has been directly affected by the increase of technology in the United States. This change has not been well accepted by some members of the educational community, thus leaving the realm of education behind in the technology era. This…

  2. Technology in Today's Classroom: Are You a Tech-Savvy Teacher?

    Science.gov (United States)

    Hicks, Stephanie Diamond

    2011-01-01

    Technology has changed the way the world functions on a day-to-day basis, but what about education? Education has been directly affected by the increase of technology in the United States. This change has not been well accepted by some members of the educational community, thus leaving the realm of education behind in the technology era. This…

  3. Still-Video Photography: Tomorrow's Electronic Cameras in the Hands of Today's Photojournalists.

    Science.gov (United States)

    Foss, Kurt; Kahan, Robert S.

    This paper examines the still-video camera and its potential impact by looking at recent experiments and by gathering information from some of the few people knowledgeable about the new technology. The paper briefly traces the evolution of the tools and processes of still-video photography, examining how photographers and their work have been…

  4. Electronics Technology. Performance Objectives. Basic Course.

    Science.gov (United States)

    Campbell, Guy

    Several intermediate performance objectives and corresponding criterion measures are listed for each of 20 terminal objectives for a basic electronics technology course. The materials were developed for a two-semester course (2 hours daily) designed to include instruction in basic electricity and electronic fundamentals, and to develop skills and…

  5. Nanocluster technologies for electronics design

    CERN Document Server

    Parker, A J

    2001-01-01

    based electronic systems. The work presented in this thesis covers an investigation into the use of metal nanoclusters in nanoelectronics design. Initial studies explored the interactions of the dodecanethiol passivated gold nanocluster, held in solution with toluene, and the native oxide covered silicon surface. Deposition of the clusters is achieved by pippetting mu-litre quantities of the solution onto the surface, and allowing the solvent to evaporate leaving the clusters as residue. Patterning of the surface with micron scale photoresist structures prior to cluster exposure, led to the selective aggregation of cluster deposits along the resist boundaries. An extension of this technique, examined the flow of the cluster solution along photoresist structures which extended beyond the solution droplet. Investigation into the electronic properties of nanocluster arrays generated non-linear current-voltage curves, which are explained in terms of two very simple models. These results cast doubt over the suitab...

  6. Today's and future challenges in applications of renewable energy technologies for desalination

    KAUST Repository

    Goosen, Mattheus F A

    2013-08-28

    Recent trends and challenges in applications of renewable energy technologies for water desalination are critically reviewed with an emphasis on environmental concerns and sustainable development. After providing an overview of wind, wave, geothermal, and solar renewable energy technologies for fresh water production, hybrid systems are assessed. Then scale-up and economic factors are considered. This is followed with a section on regulatory factors, environmental concerns, and globalization, and a final segment on selecting the most suitable renewable energy technology for conventional and emerging desalination processes. © 2014 Copyright Taylor & Francis Group, LLC.

  7. Future pathways for today's technologies. Limits and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Niessen, Stefan [AREVA GmbH, Erlangen (Germany). Innovation- and Patent Management

    2015-06-01

    The majority of the feed-in tariffs as determined by the German Energy Feed-in Act (EEG) develop as follows: they decrease as the efficiency of technologies grows. However, there are some exceptions: offshore wind and geothermal energy feed-in tariffs have been rising, while storage technologies are not included at all although they are needed to make up for intermittent renewable generation. Furthermore, nuclear energy is burdened with the fuel tax, a kind of negative feed-in tariff. These technologies seem to be confronted with specific restrictions that yet prevent large-scale development. A thorough analysis of these limitations guides to the way to overcome them.

  8. Film and television in Croatia today: production, new technologies and the relationship with visual anthropology.

    Science.gov (United States)

    Svilicić, Niksa; Vidacković, Zlatko

    2013-03-01

    This paper seeks to explain some of the most important recent production and technological changes that have affected the relationship between television and film, especially in Croatia, from the aspect of the development of visual anthropology. In the production segment, special attention was given to the role of Croatian television stations in the production of movies, "splitting" the movies into mini-series, interrupting movies with commercial breaks, and to television movies turned into feature films. This paper tries to perceive and define the structure of methodical processes of visual anthropology (reactive process). The development of photographic and film technology and the events which led to the rapid development of visual culture also point to the inseparable duality of observing visual anthropology within reactive and proactive processes, which are indirectly closely related to the technical aspects of these processes. Defining the technical aspect of visual anthropology as such "service" necessarily interferes with the author's approach in the domain of the script and direction related procedures during pre-production, on the field and during post-production of the movie. The author's approach is important because in dependence on it, the desired spectrum of information "output", susceptible to subsequent scientific analysis, is achieved. Lastly, another important segment is the "distributive-technological process" because, regardless of the approach to the anthropologically relevant phenomenon which is being dealt with in an audio-visual piece of work, it is essential that the work be presented and viewed adequately.

  9. CMOS-Technology-Enabled Flexible and Stretchable Electronics for Internet of Everything Applications

    KAUST Repository

    Hussain, Aftab M.

    2015-11-26

    Flexible and stretchable electronics can dramatically enhance the application of electronics for the emerging Internet of Everything applications where people, processes, data and devices will be integrated and connected, to augment quality of life. Using naturally flexible and stretchable polymeric substrates in combination with emerging organic and molecular materials, nanowires, nanoribbons, nanotubes, and 2D atomic crystal structured materials, significant progress has been made in the general area of such electronics. However, high volume manufacturing, reliability and performance per cost remain elusive goals for wide commercialization of these electronics. On the other hand, highly sophisticated but extremely reliable, batch-fabrication-capable and mature complementary metal oxide semiconductor (CMOS)-based technology has facilitated tremendous growth of today\\'s digital world using thin-film-based electronics; in particular, bulk monocrystalline silicon (100) which is used in most of the electronics existing today. However, one fundamental challenge is that state-of-the-art CMOS electronics are physically rigid and brittle. Therefore, in this work, how CMOS-technology-enabled flexible and stretchable electronics can be developed is discussed, with particular focus on bulk monocrystalline silicon (100). A comprehensive information base to realistically devise an integration strategy by rational design of materials, devices and processes for Internet of Everything electronics is offered. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Health technology assessment and health policy today a multifaceted view of their unstable crossroads

    CERN Document Server

    del Llano-Señarís, Juan E

    2015-01-01

    This book disentangles the issues in connection with the advancement of Health Technology Assessment (HTA) and its interface with health policy. It highlights the factors that should shape its progress in the near future. Interdisciplinary and critical views from a number of professionals are put together in a prescient order to cast some light and make recommendations as to the next steps HTA should take to be fit for purpose. A wealth of documents dealing with HTA have been published over the last three decades. HTA allegedly is one of the bedrocks of regulation and medical decision making. However, counter vailing visions contend that geographical variations in the role that HTA is actually playing within countries pinpoints specific room for improvement. Given our social preferences, cherry-picking HTA's features and successes over the last decades moves it away from its possibility frontier. Some of the most noteworthy hindrances that HTA faces, in several countries, to making headway towards its consoli...

  11. [Have you eaten any DNA today? Science communication during Science and Technology Week in Brazil].

    Science.gov (United States)

    Possik, Patricia Abrão; Shumiski, Lívia Cantisani; Corrêa, Elisete Marcia; Maia, Roberta de Assis; Medaglia, Adriana; Mourão, Lucivana Prata de Souza; Pereira, Jairo Marques Campos; Persuhn, Darlene Camati; Rufier, Myrthes; Santos, Marcelo; Sobreira, Marise; Elblink, Marcia Triunfol

    2013-11-30

    During the first National Science and Technology Week held in 2004, science centers and museums, universities and schools engaged in activities with the idea of divulging science to the people. Demonstrations of the extraction of DNA from fruits were conducted in supermarkets in 11 Brazilian cities by two institutions, DNA Vai à Escola and Conselho de Informação e Biotecnologia. This article describes the formation of a national network of people interested in communicating information about genetics to the lay public and the implementation of a low-cost science communication activity in different parts of the country simultaneously. It also analyzes the impact caused by this initiative and the perceptions of those involved in its organization.

  12. S'COOL Provides Research Opportunities and Current Data for Today's Technological Classroom

    Science.gov (United States)

    Green, Carolyn J.; Chambers, Lin H.; Racel, Anne M.

    1999-01-01

    NASA's Students' Cloud Observations On-Line (S'COOL) project, a hands-on educational project, was an innovative idea conceived by the scientists in the Radiation Sciences Branch at NASA Langley Research Center, Hampton, Virginia, in 1996. It came about after a local teacher expressed the idea that she wanted her students to be involved in real-life science. S'COOL supports NASA's Clouds and the Earth's Radiant Energy System (CERES) instrument, which was launched on the Tropical Rainforest Measuring Mission (TRMM) in November, 1997, as part of NASA's Earth Science Enterprise. With the S'COOL project students observe clouds and related weather conditions, compute data and note vital information while obtaining ground truth observations for the CERES instrument. The observations can then be used to help validate the CERES measurements, particularly detection of clear sky from space. In addition to meeting math, science and geography standards, students are engaged in using the computer to obtain, report and analyze current data, thus bringing modern technology into the realm of classroom, a paradigm that demands our attention.

  13. Addressing Ethics and Technology in Business: Preparing Today's Students for the Ethical Challenges Presented by Technology in the Workplace

    Science.gov (United States)

    Brooks, Rochelle

    2008-01-01

    The ethical development of information systems is but one of those sensitive scenarios associated with computer technology that has a tremendous impact on individuals and social life. The significance of these issues of concern cannot be overstated. However, since computer ethics is meant to be everybody's responsibility, the result can often be…

  14. Electronic technology and the SLD detector

    Energy Technology Data Exchange (ETDEWEB)

    Fox, J.D.; Dean, T.; Fox, M.J.; Freytag, D.; Gioumousis, A.; Haller, G.; Hoeflich, J.; Horelick, D.; Kang, H; Mazaheri, G.; Nelson, D.J.; Olsen, J.J.; Oxoby, G.; Paffrath, L.; Stiles, P.; Yim, A. (Stanford Linear Accelerator Center, Menlo Park, CA (USA)); Bacchetta, N. (Istituto Nazionale di Fisica Nucleare, Padua (Italy)); Bilei, G.M. (Istituto Nazionale di Fisica Nucleare, Perugia (Italy)); Carpinelli, M.; Cast

    1990-06-01

    The SLD detector consists of five major subsystems, each with associated front-end electronics and an integrated FASTBUS control and data acquisition system. This paper highlights the choices among electronic technologies that have been developed for the SLD detector electronics. The common control, calibration, and data acquisition architectures are described. The functions of selected SLD integrated circuits, standard cells, gate arrays, and hybrids are summarized, and the integration of these functions into the common data acquisition path is described. Particular attention is directed to four areas of electronic technology developed for the SLD detector: the preamplifier hybrid designs are compared to their performance and implementation examined; the application of full custom CMOS digital circuits in SLD is compared to gate array and EPLD (electrically programmable logic device) implementations; the fiberoptic signal transmission techniques in SLD are examined and the data rates and link topology are presented; and finally, the packaging, power consumption, and cooling requirements for system functions resident inside the detector structure are explored. The rationale for the implementation choices in the SLD electronics is presented so that others might benefit from our experience.

  15. Organic electronics emerging concepts and technologies

    CERN Document Server

    Santato, Clara

    2013-01-01

    An overview of the tremendous potential of organic electronics, concentrating on those emerging topics and technologies that will form the focus of research over the next five to ten years. The young and energetic team of editors with an excellent research track record has brought together internationally renowned authors to review up-and-coming topics, some for the first time, such as organic spintronics, iontronics, light emitting transistors, organic sensors and advanced structural analysis. As a result, this book serves the needs of experienced researchers in organic electronics, graduate

  16. Technologies and Designs for Electronic Nanocomputers

    Science.gov (United States)

    Montemerlo, Michael S.; Love, J. Christopher; Opiteck, Gregory J.; Goldhaber, David J.; Ellenbogen, James C.

    1995-01-01

    Diverse space-related applications have been proposed for microscopic and sub-microscopic structures, mechanisms, and 'organisms'. To govern their functions, many of these tiny systems will require even smaller, nanometer-scale programmable computers, i.e. 'nanocomputers' on-board. This paper provides an overview of the results of a nearly two-year study of the technologies and designs that presently are in development for electronic nanocomputers. Strengths and weaknesses of the various technologies and designs are discussed, as well as promising directions for remedying some of the present research issues in this area. The presentation is a synopsis of a longer MITRE review article on the same subject.

  17. 29 CFR 1615.135 - Electronic and information technology requirements.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false Electronic and information technology requirements. 1615... INFORMATION TECHNOLOGY § 1615.135 Electronic and information technology requirements. (a) Development, procurement, maintenance, or use of electronic and information technology.—When developing,...

  18. Electron Beam Technology for Environmental Pollution Control.

    Science.gov (United States)

    Chmielewski, Andrzej G; Han, Bumsoo

    2016-10-01

    Worldwide, there are over 1700 electron beam (EB) units in commercial use, providing an estimated added value to numerous products, amounting to 100 billion USD or more. High-current electron accelerators are used in diverse industries to enhance the physical and chemical properties of materials and to reduce undesirable contaminants such as pathogens, toxic byproducts, or emissions. Over the past few decades, EB technologies have been developed aimed at ensuring the safety of gaseous and liquid effluents discharged to the environment. It has been demonstrated that EB technologies for flue gas treatment (SO x and NO x removal), wastewater purification, and sludge hygienization can be effectively deployed to mitigate environmental degradation. Recently, extensive work has been carried out on the use of EB for environmental remediation, which also includes the removal of emerging contaminants such as VOCs, endocrine disrupting chemicals (EDCs), and potential EDCs.

  19. The Intelligent Technologies of Electronic Information System

    Science.gov (United States)

    Li, Xianyu

    2017-08-01

    Based upon the synopsis of system intelligence and information services, this paper puts forward the attributes and the logic structure of information service, sets forth intelligent technology framework of electronic information system, and presents a series of measures, such as optimizing business information flow, advancing data decision capability, improving information fusion precision, strengthening deep learning application and enhancing prognostic and health management, and demonstrates system operation effectiveness. This will benefit the enhancement of system intelligence.

  20. Electronic reminding technology for cognitive impairment.

    Science.gov (United States)

    Mason, Sarah; Craig, David; O'Neill, Sonia; Donnelly, Mark; Nugent, Chris

    Demographic changes highlight the need to address disabilities associated with the costly morbidities of old age, such as dementia. Memory impairment associated with dementia represents a significant challenge for many older people. Difficulties occur in carrying out activities in their entirety or in commencing them at all. Technology has the potential to help individuals overcome the barriers created by cognitive disability in terms of performing activities of daily living and therefore help to maintain independence and enhance quality of life (Czaja, 2005). This literature review examines the current reported research, which employs electronic reminding technology to support individuals with cognitive impairment. These devices range from everyday technologies, such as phones, to sophisticated interactive devices with specifically designed software. A summary of the current evidence base is presented and recommendations for future practice are made.

  1. CMOS-Technology-Enabled Flexible and Stretchable Electronics for Internet of Everything Applications.

    Science.gov (United States)

    Hussain, Aftab M; Hussain, Muhammad M

    2016-06-01

    Flexible and stretchable electronics can dramatically enhance the application of electronics for the emerging Internet of Everything applications where people, processes, data and devices will be integrated and connected, to augment quality of life. Using naturally flexible and stretchable polymeric substrates in combination with emerging organic and molecular materials, nanowires, nanoribbons, nanotubes, and 2D atomic crystal structured materials, significant progress has been made in the general area of such electronics. However, high volume manufacturing, reliability and performance per cost remain elusive goals for wide commercialization of these electronics. On the other hand, highly sophisticated but extremely reliable, batch-fabrication-capable and mature complementary metal oxide semiconductor (CMOS)-based technology has facilitated tremendous growth of today's digital world using thin-film-based electronics; in particular, bulk monocrystalline silicon (100) which is used in most of the electronics existing today. However, one fundamental challenge is that state-of-the-art CMOS electronics are physically rigid and brittle. Therefore, in this work, how CMOS-technology-enabled flexible and stretchable electronics can be developed is discussed, with particular focus on bulk monocrystalline silicon (100). A comprehensive information base to realistically devise an integration strategy by rational design of materials, devices and processes for Internet of Everything electronics is offered.

  2. Engineering, Trade, and Technical Cluster. Task Analyses. Drafting and Design Technology, Precision Machining Technology, Electronics Technology.

    Science.gov (United States)

    Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum and Resource Center.

    Developed in Virginia, this publication contains task analysis guides to support selected tech prep programs that prepare students for careers in the engineering, trade, and technical cluster. Three occupations are profiled: drafting and design technology, precision machining technology, and electronics technology. Each guide contains the…

  3. CMOS technology: a critical enabler for free-form electronics-based killer applications

    Science.gov (United States)

    Hussain, Muhammad M.; Hussain, Aftab M.; Hanna, Amir

    2016-05-01

    Complementary metal oxide semiconductor (CMOS) technology offers batch manufacturability by ultra-large-scaleintegration (ULSI) of high performance electronics with a performance/cost advantage and profound reliability. However, as of today their focus has been on rigid and bulky thin film based materials. Their applications have been limited to computation, communication, display and vehicular electronics. With the upcoming surge of Internet of Everything, we have critical opportunity to expand the world of electronics by bridging between CMOS technology and free form electronics which can be used as wearable, implantable and embedded form. The asymmetry of shape and softness of surface (skins) in natural living objects including human, other species, plants make them incompatible with the presently available uniformly shaped and rigidly structured today's CMOS electronics. But if we can break this barrier then we can use the physically free form electronics for applications like plant monitoring for expansion of agricultural productivity and quality, we can find monitoring and treatment focused consumer healthcare electronics - and many more creative applications. In our view, the fundamental challenge is to engage the mass users to materialize their creative ideas. Present form of electronics are too complex to understand, to work with and to use. By deploying game changing additive manufacturing, low-cost raw materials, transfer printing along with CMOS technology, we can potentially stick high quality CMOS electronics on any existing objects and embed such electronics into any future objects that will be made. The end goal is to make them smart to augment the quality of our life. We use a particular example on implantable electronics (brain machine interface) and its integration strategy enabled by CMOS device design and technology run path.

  4. Electrical and electronic principles and technology

    CERN Document Server

    John Bird

    2013-01-01

    This much-loved textbook introduces electrical and electronic principles and technology to students who are new to the subject. Real-world situations and engineering examples put the theory into context. The inclusion of worked problems with solutions really help aid your understanding and further problems then allow you to test and confirm you have mastered each subject. In total the books contains 410 worked problems, 540 further problems, 340 multiple-choice questions, 455 short-answer questions, and 7 revision tests with answers online.This an ideal text for vocational courses enabling a s

  5. Information services today an introduction

    CERN Document Server

    Hirsh, Sandra

    2015-01-01

    This essential overview of what it means to be a library and information professional today provides a broad overview of the transformation of libraries as information organizations, why these organizations are more important today than ever before, the technological influence on how we provide information resources and services in today's digital and global environment, and the various career opportunities available for information professionals. The book begins with a historical overview of libraries and their transformation as information and technology

  6. Applied Physics Modules Selected for Electrical and Electronic Technologies.

    Science.gov (United States)

    Waring, Gene

    Designed for individualized use in an applied physics course in postsecondary vocational-technical education, this series of twenty-three learning modules is equivalent to the content of two quarters of a five-credit hour class in electrical technology, electronic service technology, electronic engineering technology, or electromechanical…

  7. Technology Acceptance of Electronic Medical Records by Nurses

    Science.gov (United States)

    Stocker, Gary

    2010-01-01

    The purpose of this study was to evaluate the Technology Acceptance Model's (TAM) relevance of the intention of nurses to use electronic medical records in acute health care settings. The basic technology acceptance research of Davis (1989) was applied to the specific technology tool of electronic medical records (EMR) in a specific setting…

  8. 48 CFR 1352.239-71 - Electronic and information technology.

    Science.gov (United States)

    2010-10-01

    ... technology. 1352.239-71 Section 1352.239-71 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE... Electronic and information technology. As prescribed in 48 CFR 1339.270(a), insert the following provision: Electronic and Information Technology (APR 2010) (a) To be considered eligible for award, offerors...

  9. Electronic Commerce: Canadian Community Colleges and Institutes of Technology.

    Science.gov (United States)

    Association of Canadian Community Colleges.

    This paper reports on the Canadian college system's collaboration with industry and community services in the development and delivery of non-credit e-commerce courses offered through continuing education departments at community colleges and institutes of technology. The paper argues that, in today's changing economy, the accelerated need for…

  10. Building Tomorrow's Business Today

    Science.gov (United States)

    Ryan, Jim

    2010-01-01

    Modern automobile maintenance, like most skilled-trades jobs, is more than simple nuts and bolts. Today, skilled-trades jobs might mean hydraulics, computerized monitoring equipment, electronic blueprints, even lasers. As chief executive officer of Grainger, a business-to-business maintenance, repair, and operating supplies company that…

  11. Plasma Cathode Electron Sources Physics, Technology, Applications

    CERN Document Server

    Oks, Efim

    2006-01-01

    This book fills the gap for a textbook describing this kind of electron beam source in a systematic and thorough manner: from physical processes of electron emission to examples of real plasma electron sources and their applications.

  12. Preface: Catalysis Today

    DEFF Research Database (Denmark)

    Li, Yongdan

    2016-01-01

    This special issue of Catalysis Today with the theme “Sustain-able Energy” results from a great success of the session “Catalytic Technologies Accelerating the Establishment of Sustainable and Clean Energy”, one of the two sessions of the 1st International Symposium on Catalytic Science and Techn......This special issue of Catalysis Today with the theme “Sustain-able Energy” results from a great success of the session “Catalytic Technologies Accelerating the Establishment of Sustainable and Clean Energy”, one of the two sessions of the 1st International Symposium on Catalytic Science...... and Technology in Sustainable Energy and Environment, held in Tianjin, China during October8–10, 2014. This biennial symposium offers an international forum for discussing and sharing the cutting-edge researches and the most recent breakthroughs in energy and environmental technologies based on catalysis...

  13. Psychoanalysis today

    Science.gov (United States)

    FONAGY, PETER

    2003-01-01

    The paper discusses the precarious position of psychoanalysis, a therapeutic approach which historically has defined itself by freedom from constraint and counted treatment length not in terms of number of sessions but in terms of years, in today's era of empirically validated treatments and brief structured interventions. The evidence that exists for the effectiveness of psychoanalysis as a treatment for psychological disorder is reviewed. The evidence base is significant and growing, but less than might meet criteria for an empirically based therapy. The author goes on to argue that the absence of evidence may be symptomatic of the epistemic difficulties that psychoanalysis faces in the context of 21st century psychiatry, and examines some of the philosophical problems faced by psychoanalysis as a model of the mind. Finally some changes necessary in order to ensure a future for psychoanalysis and psychoanalytic therapies within psychiatry are suggested. PMID:16946899

  14. CMOS technology: a critical enabler for free-form electronics-based killer applications

    KAUST Repository

    Hussain, Muhammad Mustafa

    2016-05-17

    Complementary metal oxide semiconductor (CMOS) technology offers batch manufacturability by ultra-large-scaleintegration (ULSI) of high performance electronics with a performance/cost advantage and profound reliability. However, as of today their focus has been on rigid and bulky thin film based materials. Their applications have been limited to computation, communication, display and vehicular electronics. With the upcoming surge of Internet of Everything, we have critical opportunity to expand the world of electronics by bridging between CMOS technology and free form electronics which can be used as wearable, implantable and embedded form. The asymmetry of shape and softness of surface (skins) in natural living objects including human, other species, plants make them incompatible with the presently available uniformly shaped and rigidly structured today’s CMOS electronics. But if we can break this barrier then we can use the physically free form electronics for applications like plant monitoring for expansion of agricultural productivity and quality, we can find monitoring and treatment focused consumer healthcare electronics – and many more creative applications. In our view, the fundamental challenge is to engage the mass users to materialize their creative ideas. Present form of electronics are too complex to understand, to work with and to use. By deploying game changing additive manufacturing, low-cost raw materials, transfer printing along with CMOS technology, we can potentially stick high quality CMOS electronics on any existing objects and embed such electronics into any future objects that will be made. The end goal is to make them smart to augment the quality of our life. We use a particular example on implantable electronics (brain machine interface) and its integration strategy enabled by CMOS device design and technology run path. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is

  15. Academic librarianship today

    CERN Document Server

    2017-01-01

    Intended for use by both librarians and students in LIS programs, Academic Librarianship Today is the most current, comprehensive overview of the field available today. Key features include: Each chapter was commissioned specifically for this new book, and the authors are highly regarded academic librarians or library school faculty— or both Cutting-edge topics such as open access, copyright, digital curation and preservation, emerging technologies, new roles for academic librarians, cooperative collection development and resource sharing, and patron-driven acquisitions are explored in depth Each chapter ends with thought-provoking questions for discussion and carefully constructed assignments that faculty can assign or adapt for their courses The book begins with Gilman’s introduction, an overview that briefly synthesizes the contents of the contributors’ chapters by highlighting major themes. The main part of the book is organized into three parts: The Academic Library Landscape Today, ...

  16. 48 CFR 311.7000 - Defining electronic information technology requirements.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Defining electronic information technology requirements. 311.7000 Section 311.7000 Federal Acquisition Regulations System HEALTH... Accessibility Standards 311.7000 Defining electronic information technology requirements. HHS staff that...

  17. Integrating Instructional Technology with Information Technology and Its Implications for Designing Electronic Learning Systems.

    Science.gov (United States)

    Abdelraheem, Ahmed Yousif

    2005-01-01

    In this paper the concepts of technology, instructional technology, and information technology are presented. The integration of instructional technology, and information technology is established and its implications for electronic learning systems design are discussed. One can say that: information and instructional designers can design…

  18. Science and Math Lesson Plans to Meet the Ohio Revised Science Standards and the Next Generation of Standards for Today; Technology (Excel

    Directory of Open Access Journals (Sweden)

    Suzanne Lunsford

    2015-02-01

    Full Text Available Pre-service teachers (K-12 developed and taught lesson plans that met the state and national science and technology standards by integrating Excel and PowerPoint into their lesson. A sample of 74 pre-service teachers in our science education program were required to integrate technology (Excel as they developed science and math lesson plans with graphing as a requirement. These students took pre-test and post-test (n=74 to determine their understanding of Excel in relation to the need of current technology for todays' science classroom. The test results showed that students obtained content gains in Excel graphing in all the inquiry-based lab experiments. They also gained experience in developing math skills, inquiry-based science lesson plans, and communication and presentation skills.

  19. Agrogeology today

    Science.gov (United States)

    Kerek, Barbara; Kuti, Laszlo; Vatai, Jozsef

    2010-05-01

    the soil-(soil forming sediment)-parent rock-groundwater or "soil-parent rock-bedrock" system aimed at the prevention and elimination of harmful effects. 5. Investigation of the geological aspects of water regulation and irrigation as well as their impact on the environment. 6. Definition, examination and characterisation of the real soil forming geological sequence. In Hungary the actual agrogeological investigations were launched by the agricultural reambulation of geological mapping data. During the early 1980s the so-called BFK-method was elaborated to the agrogeological investigation of these areas still used today. The main aspect of this method is that apart from the common geological sampling of the boreholes samples are also taken from the top- and subsoil (horizon 1), the soil forming sediment or parent material (horizon 2), the fluctuation zone of the groundwater (horizon 3) as well as from the zone permanently below the groundwater level (horizon 4) and the groundwater itself (Figure 2). These samples undergo detailed laboratory analyses. The comparative evaluation of the derived results allows making different agrogeological conclusions. During the period elapsed from the early 1980s the survey of the pilot areas allowed us investigating among others the agrogeological relationships of salinisation, acidification, excess water risk, erosion, and trace element regime as well as vine chlorosis.

  20. Electronic Aggression: New Technology and Youth Violence

    Science.gov (United States)

    ... Recommend on Facebook Tweet Share Compartir Publications Electronic Media and Youth Violence: A CDC Issue Brief for Educators and Caregivers [PDF 5.5MB] Electronic Media and Youth Violence: A CDC Research Brief for Researchers [PDF 11MB] ...

  1. HIRFL Today

    Energy Technology Data Exchange (ETDEWEB)

    Zhan, W.L.; Xia, J.W.; Zhao, H.W.; Xiao, G.Q.; Yuan, Y.J.; Xu, H.S.; Man, K.D; Yuan, P.; Gao, D.Q.; Yang, X.T.; Song, M.T.; Cai, X.H.; Yang, X.D.; Sun, Z.Y.; Huang, W.X.; Gan, Z.G.; Wei, B.W. [Institute of Modern Physics, CAS, 509 Nanchang Rd, Lanzhou (China)

    2008-06-01

    HIRFL was upgraded from beginning 2000. Besides of researches on nuclear physics, atomic physics, irradiative material and biology, the cancer therapy by heavy ion and hadron physics are being developing. The injector system of SFC+SSC can provide all ions from proton to uranium with higher intensity. The Cooling Storage Ring (CSR) has accelerated beams successful. The ions {sup 12}C{sup 6+}, {sup 36}Ar{sup 18+}, {sup 129}Xe{sup 27+} have been accelerated up 1000MeV/u, 235MeV/u with about 10{sup 9}{approx}10{sup 8} ions per spill respectively. The beam momentum dispersion was measured from 4x10{sup -3} to 2x10{sup -4} after cooling by the electron cooler or {approx}4x10{sup -4} after accelerated to 1000MeV/u without cooling. In order to improve the nuclear structure and heavy isotope research in SFC+SSC energy domain. A Wien filter was added in front of RIBLL and gas was filled in first section of RIBLL; a new spectrometry SHANS has being installed. Presently, there are two starting version experimental setups at CSR.

  2. HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.ELECTRON BEAM TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report evaluates a high-voltage electron beam (E-beam) technology's ability to destroy volatile organic compounds (VOCs) and other contaminants present in liquid wastes. Specifically, this report discusses performance and economic data from a Superfund Innovative Technology...

  3. Typical presentation to evaluate NFC technology in electronic mobile payments

    Directory of Open Access Journals (Sweden)

    Shima Asadbeigi

    2016-07-01

    Full Text Available In recent years, electronic micro payments by cell phones have been possible. Some activities have been done in this field as well. Mobile near field communication (NFC technology, which is a standard mobile method for connecting electronic devices at near distances, has grabbed a lot of attention in order to pay mobile micro payments and electronic payment services by financial institutions, payment service companies, SIM cards manufacturers and operators. The beneficiary organizations need to meet some requirements such as management preparation. This paper aims to detect different NFC technology uses and study and rank the main factors of success in implementation of this technology in organization by applying analytic hierarchy process. The humanitarian specialists and environmental and technological experts should be considered in order to use NFC technology in mobile payments. Among 81 sub-criteria, security and privacy are the most important factors for implementing NFC technology successfully.

  4. The role of electronic communication technology in adolescent dating violence.

    Science.gov (United States)

    Draucker, Claire Burke; Martsolf, Donna S

    2010-08-01

    Adolescent dating violence and electronic aggression are significant public health problems. The purpose of this study was to (a) identify ways in which technology is used in dating violence and (b) present examples of dating violence in which electronic aggression played a salient role. The data set included the transcribed narratives of 56 young adults who had described their adolescent dating violence experiences for an on going study. Eight ways in which technology is used in dating violence were identified using qualitative descriptive methods. The findings indicate that electronic communication technology influences dating violence by redefining boundaries between dating partners.

  5. Electronic control/display interface technology

    Science.gov (United States)

    Parrish, R. V.; Busquets, A. M.; Murray, R. F.; Hatfield, J. J.

    1985-01-01

    An effort to produce a representative workstation for the Space Station Data Management Test Bed that provides man/machine interface design options for consolidating, automating, and integrating the space station work station, and hardware/software technology demonstrations of space station applications is discussed. The workstation will emphasize the technologies of advanced graphics engines, advanced display/control medias, image management techniques, multifunction controls, and video disk utilizations.

  6. A Survey of Power Electronics Applications in Aerospace Technologies

    Science.gov (United States)

    Kankam, M. David; Elbuluk, Malik E.

    2001-01-01

    The insertion of power electronics in aerospace technologies is becoming widespread. The application of semiconductor devices and electronic converters, as summarized in this paper, includes the International Space Station, satellite power system, and motor drives in 'more electric' technology applied to aircraft, starter/generators and reusable launch vehicles. Flywheels, servo systems embodying electromechanical actuation, and spacecraft on-board electric propulsion are discussed. Continued inroad by power electronics depends on resolving incompatibility of using variable frequency for 400 Hz-operated aircraft equipment. Dual-use electronic modules should reduce system development cost.

  7. Single-chamber solid oxide fuel cell technology - From its origins to today's state of the art

    Energy Technology Data Exchange (ETDEWEB)

    Khun, M. [Department of Mechanical Engineering, Ecole Polytechnique de Montreal, Montreal, Quebec, H3T 1J4 (Canada); Napporn, T. W. [Equipe Electrocatalyse, Laboratoire de Catalyse en Chimie Organique, UMR CNRS 6503, Universite de Poitiers, Poitiers (France)

    2010-07-01

    In single-chamber solid oxide fuel cells (SC-SOFCs), both anode and cathode are situated in a common gas chamber and are exposed to a mixture of fuel and oxidant. The working principle is based on the difference in catalytic activity of the electrodes for the respective anodic and cathodic reactions. The resulting difference in oxygen partial pressure between the electrodes leads to the generation of an open circuit voltage. Progress in SC-SOFC technology has enabled the generation of power outputs comparable to those of conventional SOFCs. This paper provides a detailed review of the development of SC-SOFC technology. (author)

  8. [Mathematics, natural sciences and technology--parts of the encyclopedia Die Kultur der Gegenwart (The culture of today)].

    Science.gov (United States)

    Tobies, Renate

    2008-03-01

    The paper explores the trend of the early 20th century to consolidate mathematics, natural sciences, medicine and technology under the umbrella of one integrative culture--a tendency which contrasts with the increasing mainstream trend of separating the humanities from the natural sciences. The unifying umbrella was framed by the great encyclopedia Die Kultur der Gegenwart which was published by B. G. Teubner from 1905 to 1925 and was planned to run up to 62 volumes. We analyze the quantitative rate of the parts devoted to the humanities, the natural sciences and technology, respectively, the degree to which these parts were completed in this encyclopedia. In particular, we investigate the role of mathematicians and their reasons to find a classification for the mathematical, natural scientific and engineering parts of culture as well as their reasons, to win Nobel prize winners and other famous scientists to become co-editors and authors. We examine the published volumes in the fields of mathematics, chemistry, physics, astronomy and technology in order to show what type of publication--professional or popular--was intended. Furthermore, we illuminate how the educational reform of mathematics, natural sciences and technology of this period--which included a reform of girls' and women's education--was reflected in the encyclopedia Die Kultur der Gegenwart.

  9. Storage Ring Technology for Free Electron Lasers.

    Science.gov (United States)

    1984-04-01

    new starting mode, it is clear that an arbitrary third mode amplitude can be added 1ithout changing the result. It follows by induction that for an...du laser. On montre que la puissance moyenne est en accord avec la limite imposee par le chauffage du paquet d’electrons (limite de Renieri

  10. Scientific Inquiry into Home Electronic Technology Usage

    Science.gov (United States)

    Lazaros, Edward J.; Spotts, Thomas H.; Verdon, Jessica E.

    2010-01-01

    This activity promotes ways to save electricity in the home. Students identify electronic devices in the home and examine wattage, hours of use per month, estimated wattage per month, kilowatt hours per month, average retail price per kilowatt hour in each state, and the estimated cost per month. Students gain an appreciation for how saving power…

  11. Information Technology in project-organized electronic and computer technology engineering education

    DEFF Research Database (Denmark)

    Nielsen, Kirsten Mølgaard; Nielsen, Jens Frederik Dalsgaard

    1999-01-01

    This paper describes the integration of IT in the education of electronic and computer technology engineers at Institute of Electronic Systems, Aalborg Uni-versity, Denmark. At the Institute Information Technology is an important tool in the aspects of the education as well as for communication...

  12. Electronic commerce: wiring the coal industry for new data technology

    Energy Technology Data Exchange (ETDEWEB)

    Carter, R.A.

    1998-07-01

    Industry pundits predict that coal by wire may some day replace much of the industry`s long-distance shipping requirements and their attendant costs, but data by wire, also known as electronic commerce (EC) can today offer coal producers and customers the means to gather and send large volumes of data cheaply and quickly. EC`s major components - electronic data interchange (EDI), bar-coding, smart codes, radio frequency `D`, and the internet - can reduce costs in equipment-intensive industries such as mining. The US National Mining Association sponsored a forum to discuss these alternatives at its 1998 Electronic Commerce Summit held in Tuscon, Arizona, 18-20 May. A report is given of discussions at the forum and contacts are given for sources of EDI information.

  13. CERN's web application updates for electron and laser beam technologies

    CERN Document Server

    Sigas, Christos

    2017-01-01

    This report describes the modifications at CERN's web application for electron and laser beam technologies. There are updates at both the front and the back end of the application. New electron and laser machines were added and also old machines were updated. There is also a new feature for printing needed information.

  14. Water resources protection today: end-of-pipe technology and cleaner production. Case study of the Czech Odra River watershed.

    Science.gov (United States)

    Chour, V

    2001-01-01

    This paper reports on integrated watershed-based protection and sustainable use of water resources to increase the effectiveness of water pollution abatement. The approach includes improvements in end-of-pipe waste-water treatment technologies and implementation of Cleaner Production (CP) principles and policies within the watershed. An example of the general effectiveness of this approach is illustrated by the Czech Odra River Cleaner Production Project where reductions in pollution were achieved with improved industrial production. The CP theme is worth considering as an important challenge for the IWA.

  15. Flexible technology for Electronics: Its Derivatives and Possibilities

    Directory of Open Access Journals (Sweden)

    Deovrat Phal

    2014-02-01

    Full Text Available With the inkjet printing technology becoming more popular, integration of circuits developed on flexible substrates which are easily embedded inside the machine as against the rigid PCB circuits is becoming more prevalent. Much of the research has been done in applications of such circuits in human body implants or for other low cost applications. This paper concentrates particularly on applications of such circuits in the field of consumer electronics, disposable electronics, display technology and discusses the derivatives of this technology and its future possibilities.

  16. Power electronics - The key technology for Renewable Energy Systems

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Ma, Ke; Yang, Yongheng

    2014-01-01

    and effectively, energy conversion systems, currently based on power electronics technology, will again play an essential role in this energy paradigm shift. Using highly efficient power electronics in power generation, power transmission/distribution and end-user application, together with advanced control...... solutions, can pave the way for renewable energies. In light of this, some of the most emerging renewable energies, e.g. wind energy and photovoltaic, which by means of power electronics are changing character as a major part in the electricity generation, are explored in this paper. Issues like technology...... development, implementation, power converter technologies, control of the systems, and synchronization are addressed. Special focuses are paid on the future trends in power electronics for those systems like how to lower the cost of energy and to develop emerging power devices and better reliability tool....

  17. The NASA Electronic Parts and Packaging (NEPP) Program: Insertion of New Electronics Technologies

    Science.gov (United States)

    LaBel, Kenneth A.; Sampson, Michael J.

    2007-01-01

    This viewgraph presentation gives an overview of NASA Electronic Parts and Packaging (NEPP) Program's new electronics technology trends. The topics include: 1) The Changing World of Radiation Testing of Memories; 2) Even Application-Specific Tests are Costly!; 3) Hypothetical New Technology Part Qualification Cost; 4) Where we are; 5) Approaching FPGAs as a More Than a "Part" for Reliability; 6) FPGAs Beget Novel Radiation Test Setups; 7) Understanding the Complex Radiation Data; 8) Tracking Packaging Complexity and Reliability for FPGAs; 9) Devices Supporting the FPGA Need to be Considered; 10) Summary of the New Electronic Technologies and Insertion into Flight Programs Workshop; and 11) Highlights of Panel Notes and Comments

  18. Handbook of Machine Olfaction: Electronic Nose Technology

    Science.gov (United States)

    Pearce, Tim C.; Schiffman, Susan S.; Nagle, H. Troy; Gardner, Julian W.

    2003-02-01

    "Electronic noses" are instruments which mimic the sense of smell. Consisting of olfactory sensors and a suitable signal processing unit, they are able to detect and distinguish odors precisely and at low cost. This makes them very useful for a remarkable variety of applications in the food and pharmaceutical industry, in environmental control or clinical diagnostics and more. The scope covers biological and technical fundamentals and up-to-date research. Contributions by renowned international scientists as well as application-oriented news from successful "e-nose" manufacturers give a well-rounded account of the topic, and this coverage from R&D to applications makes this book a must-have read for e-nose researchers, designers and users alike.

  19. Automotive Technology Evolved by Electrical and Electronic Systems

    Science.gov (United States)

    Teratani, Tatsuo; Okuma, Shigeru

    Automotive electrical and electronic systems, e.g. EHV, FCV, future X-By-Wire, have recently been introduced or planned in place of mechanical systems. Drivers are demanding environmental performance (fuel consumption and weight reduction), safety and comfort. For general use of the new technologies, evolution of the automotive technology is required, including energy conversion efficiency improvement, size and weight reduction of components, cost reduction and high reliability. This paper discusses and summarizes the next generation power systems, the future vehicle image, power source combinations, and problems to be solved for development of automotive electronics.

  20. Advances in Electronic-Nose Technologies Developed for Biomedical Applications

    Directory of Open Access Journals (Sweden)

    Alphus D. Wilson

    2011-01-01

    Full Text Available The research and development of new electronic-nose applications in the biomedical field has accelerated at a phenomenal rate over the past 25 years. Many innovative e-nose technologies have provided solutions and applications to a wide variety of complex biomedical and healthcare problems. The purposes of this review are to present a comprehensive analysis of past and recent biomedical research findings and developments of electronic-nose sensor technologies, and to identify current and future potential e-nose applications that will continue to advance the effectiveness and efficiency of biomedical treatments and healthcare services for many years. An abundance of electronic-nose applications has been developed for a variety of healthcare sectors including diagnostics, immunology, pathology, patient recovery, pharmacology, physical therapy, physiology, preventative medicine, remote healthcare, and wound and graft healing. Specific biomedical e-nose applications range from uses in biochemical testing, blood-compatibility evaluations, disease diagnoses, and drug delivery to monitoring of metabolic levels, organ dysfunctions, and patient conditions through telemedicine. This paper summarizes the major electronic-nose technologies developed for healthcare and biomedical applications since the late 1980s when electronic aroma detection technologies were first recognized to be potentially useful in providing effective solutions to problems in the healthcare industry.

  1. Biomedical stretchable sytems using MID based stretchable electronics technology.

    Science.gov (United States)

    Axisa, F; Brosteaux, D; De Leersnyder, E; Bossuyt, F; Vanfleteren, J; Hermans, B; Puers, R

    2007-01-01

    In order to fit human body, flexibility, or even better stretchability is requested for biomedical systems like implants or smart clothes. A stretchable electronic technology has been developed. This can provide highly stretchable interconnections fully compatible with PCB technologies. In order to prove the feasibility of complex biomedical systems like inner body implants or wearable systems, a variety of stretchable systems has been designed from sensor to power source systems.

  2. Technology Corner: Dating of Electronic Hardware for Prior Art Investigations

    Directory of Open Access Journals (Sweden)

    Sellam Ismail

    2012-03-01

    Full Text Available In many legal matters, specifically patent litigation, determining and authenticating the date of computer hardware or other electronic products or components is often key to establishing the item as legitimate evidence of prior art. Such evidence can be used to buttress claims of technologies available or of events transpiring by or at a particular date.In 1945, the Electronics Industry Association published a standard, EIA 476-A, standardized in the reference Source and Date Code Marking (Electronic Industries Association, 1988.(see PDF for full tech corner

  3. Woven electronics: a new perspective for wearable technology.

    Science.gov (United States)

    Locci, Simone; Maccioni, Maurizio; Orgiu, Emanuele; Bonfiglio, Annalisa

    2007-01-01

    Endowing a textile substrate (i.e. fibers, yarns, fabrics) with active functions is a new powerful concept, that has recently given rise to several interesting contributions. In this paper, we will describe a possible approach to this intriguing objective, focusing on the technology and on the electronic model. Future applications for this technology will allow to obtain, for instance, matrices of sensors assembled by textile technology and will ensure to obtain for wearable devices the necessary properties of drapability and conformity to the body that are required for these applications.

  4. Recycling of the Electronic Waste Applying the Plasma Reactor Technology

    Science.gov (United States)

    Lázár, Marián; Jasminská, Natália; Čarnogurská, Mária; Dobáková, Romana

    2016-12-01

    The following paper discusses a high-temperature gasification process and melting of electronic components and computer equipment using plasma reactor technology. It analyses the marginal conditions of batch processing, as well as the formation of solid products which result from the procedure of waste processing. Attention is also paid to the impact of the emerging products on the environment.

  5. Power Electronics as key technology in wind turbines

    DEFF Research Database (Denmark)

    Blaabjerg, Frede

    2005-01-01

    This paper discuss the development in wind turbines in a two-decade perspective looking at the technology based on track records. Different power electronic topologies for interfacing the wind turbine to the grid are discussed and related to the possibility for the wind turbine to act as a power...

  6. Recycling of the Electronic Waste Applying the Plasma Reactor Technology

    Directory of Open Access Journals (Sweden)

    Lázár Marián

    2016-12-01

    Full Text Available The following paper discusses a high-temperature gasification process and melting of electronic components and computer equipment using plasma reactor technology. It analyses the marginal conditions of batch processing, as well as the formation of solid products which result from the procedure of waste processing. Attention is also paid to the impact of the emerging products on the environment.

  7. The Costs of Information Technology and the Electronic Library.

    Science.gov (United States)

    Tebbetts, Diane R.

    2000-01-01

    Discusses the impact of information technology requirements on the costs of electronic libraries. Addresses key questions concerning hardware, software and network installation and upgrades and provides strategies for dealing with the needs for continuous funding and long-term financing that are essential for keeping up with the requirements of…

  8. Applications and Advances in Electronic-Nose Technologies

    Directory of Open Access Journals (Sweden)

    Manuela Baietto

    2009-06-01

    Full Text Available Electronic-nose devices have received considerable attention in the field of sensor technology during the past twenty years, largely due to the discovery of numerous applications derived from research in diverse fields of applied sciences. Recent applications of electronic nose technologies have come through advances in sensor design, material improvements, software innovations and progress in microcircuitry design and systems integration. The invention of many new e-nose sensor types and arrays, based on different detection principles and mechanisms, is closely correlated with the expansion of new applications. Electronic noses have provided a plethora of benefits to a variety of commercial industries, including the agricultural, biomedical, cosmetics, environmental, food, manufacturing, military, pharmaceutical, regulatory, and various scientific research fields. Advances have improved product attributes, uniformity, and consistency as a result of increases in quality control capabilities afforded by electronic-nose monitoring of all phases of industrial manufacturing processes. This paper is a review of the major electronic-nose technologies, developed since this specialized field was born and became prominent in the mid 1980s, and a summarization of some of the more important and useful applications that have been of greatest benefit to man.

  9. Technology station in electronics at the Tshwane University of Technology: strengthening technological innovation activities amongst SMEs and students

    CSIR Research Space (South Africa)

    Jacobs, SJ

    2009-01-01

    Full Text Available This article focuses on how the competence and capacity within the Faculty of Engineering and the Built Environment, specifically the electronic/electrical discipline, at the Tshwane University of Technology is utilised to support Small Medium...

  10. International Conference on NextGen Electronic Technologies

    CERN Document Server

    Thalmann, Nadia; Bhaaskaran, V

    2017-01-01

    This book is a collection of keynote lectures from international experts presented at International Conference on NextGen Electronic Technologies (ICNETS2-2016). ICNETS2 encompasses six symposia covering all aspects of electronics and communications domains, including relevant nano/micro materials and devices . This volume comprises of recent research in areas like computational signal processing analysis, intelligent embedded systems, nanoelectronic materials and devices, optical and microwave technologies, VLSI design: circuits systems and application, and wireless communication networks, and the internet of things. The contents of this book will be useful to researchers, professionals, and students working in the core areas of electronics and their applications, especially to signal processing, embedded systems, and networking.

  11. Power electronics - key technology for renewable energy systems

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Iov, Florin; Kerekes, Tamas

    2011-01-01

    sources to renewable energy sources. Another is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss trends of the most emerging renewable energy sources, wind energy and photovoltaics, which by means of power electronics...... are changing and challenging the future electrical infrastructure but also contributes steadily more to non-carbon based electricity production. Most focus in the paper is on the power electronics technologies used. In the case of photovoltaics transformer-less systems are discussed as they have the potential...... as efficient as possible. Further, the emerging climate changes is arguing to find sustainable future solutions. Of many options, two major technologies will play important roles to solve parts of those future problems. One is to change the electrical power production from conventional, fossil based energy...

  12. Technical report writing today

    CERN Document Server

    Riordan, Daniel G

    2014-01-01

    "Technical Report Writing Today" provides thorough coverage of technical writing basics, techniques, and applications. Through a practical focus with varied examples and exercises, students internalize the skills necessary to produce clear and effective documents and reports. Project worksheets help students organize their thoughts and prepare for assignments, and focus boxes highlight key information and recent developments in technical communication. Extensive individual and collaborative exercises expose students to different kinds of technical writing problems and solutions. Annotated student examples - more than 100 in all - illustrate different writing styles and approaches to problems. Numerous short and long examples throughout the text demonstrate solutions for handling writing assignments in current career situations. The four-color artwork in the chapter on creating visuals keeps pace with contemporary workplace capabilities. The Tenth Edition offers the latest information on using electronic resum...

  13. Self-shielded electron linear accelerators designed for radiation technologies

    Science.gov (United States)

    Belugin, V. M.; Rozanov, N. E.; Pirozhenko, V. M.

    2009-09-01

    This paper describes self-shielded high-intensity electron linear accelerators designed for radiation technologies. The specific property of the accelerators is that they do not apply an external magnetic field; acceleration and focusing of electron beams are performed by radio-frequency fields in the accelerating structures. The main characteristics of the accelerators are high current and beam power, but also reliable operation and a long service life. To obtain these characteristics, a number of problems have been solved, including a particular optimization of the accelerator components and the application of a variety of specific means. The paper describes features of the electron beam dynamics, accelerating structure, and radio-frequency power supply. Several compact self-shielded accelerators for radiation sterilization and x-ray cargo inspection have been created. The introduced methods made it possible to obtain a high intensity of the electron beam and good performance of the accelerators.

  14. Control and power electronics technology in renewable energy

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    As the cut-in point of research on control and power electronics technology used in renewable energy, this paper does not aim to analyze particular theories or tech-nologies in this field, but, instead, is to go back to the fountainhead of the issue to illustrate the essential concepts in this field, which are usually neglected and may become bottle-neck of the research. Research experiences have shown that con-fusion and trouble may be created if researchers do not understand these essential concepts well.

  15. Intellectual property in consumer electronics, software and technology startups

    CERN Document Server

    Halt, Jr , Gerald B; Stiles, Amber R; Fesnak, Robert

    2014-01-01

    This book provides a comprehensive guide to procuring, utilizing and monetizing intellectual property rights, tailored for readers in the high-tech consumer electronics and software industries, as well as technology startups.  Numerous, real examples, case studies and scenarios are incorporated throughout the book to illustrate the topics discussed.  Readers will learn what to consider throughout the various creative phases of a product’s lifespan from initial research and development initiatives through post-production.  Readers will gain an understanding of the intellectual property protections afforded to U.S. corporations, methods to pro-actively reduce potential problems, and guidelines for future considerations to reduce legal spending, prevent IP theft, and allow for greater profitability from corporate innovation and inventiveness. • Offers a comprehensive guide to intellectual property for readers in high-tech consumer electronics, software and technology startups; • Uses real case studies...

  16. Component technologies for a recirculating linac free-electron laser

    Science.gov (United States)

    Litvinenko, Vladimir N.; Madey, John M. J.; Vinokurov, Nikolai A.

    1994-05-01

    The key component technologies required for a high average power free-electron laser (FEL) are described. Some basic aspects of approaches for high average power (scalable to megawatt level) accelerators and FELs are presented. A short description of the Novosibirsk 100 kW average power near infrared (IR) FEL driven by a race-track microtron-recuperator is given. The current status and plans for this facility are provided by Institute of Nuclear Physics (Novosibirsk).

  17. Meat Quality Assessment by Electronic Nose (Machine Olfaction Technology

    Directory of Open Access Journals (Sweden)

    Sundar Balasubramanian

    2009-07-01

    Full Text Available Over the last twenty years, newly developed chemical sensor systems (so called “electronic noses” have made odor analyses possible. These systems involve various types of electronic chemical gas sensors with partial specificity, as well as suitable statistical methods enabling the recognition of complex odors. As commercial instruments have become available, a substantial increase in research into the application of electronic noses in the evaluation of volatile compounds in food, cosmetic and other items of everyday life is observed. At present, the commercial gas sensor technologies comprise metal oxide semiconductors, metal oxide semiconductor field effect transistors, organic conducting polymers, and piezoelectric crystal sensors. Further sensors based on fibreoptic, electrochemical and bi-metal principles are still in the developmental stage. Statistical analysis techniques range from simple graphical evaluation to multivariate analysis such as artificial neural network and radial basis function. The introduction of electronic noses into the area of food is envisaged for quality control, process monitoring, freshness evaluation, shelf-life investigation and authenticity assessment. Considerable work has already been carried out on meat, grains, coffee, mushrooms, cheese, sugar, fish, beer and other beverages, as well as on the odor quality evaluation of food packaging material. This paper describes the applications of these systems for meat quality assessment, where fast detection methods are essential for appropriate product management. The results suggest the possibility of using this new technology in meat handling.

  18. Packaging Printing Today

    Directory of Open Access Journals (Sweden)

    Stanislav Bolanča

    2015-12-01

    Full Text Available Printing packaging covers today about 50% of all the printing products. Among the printing products there are printing on labels, printing on flexible packaging, printing on folding boxes, printing on the boxes of corrugated board, printing on glass packaging, synthetic and metal ones. The mentioned packaging are printed in flexo printing technique, offset printing technique, intaglio halftone process, silk – screen printing, ink ball printing, digital printing and hybrid printing process. The possibilities of particular printing techniques for optimal production of the determined packaging were studied in the paper. The problem was viewed from the technological and economical aspect. The possible printing quality and the time necessary for the printing realization were taken as key parameters. An important segment of the production and the way of life is alocation value and it had also found its place in this paper. The events in the field of packaging printing in the whole world were analyzed. The trends of technique developments and the printing technology for packaging printing in near future were also discussed.

  19. Development of superconducting acceleration cavity technology for free electron lasers

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jong Min; Lee, Byung Cheol; Kim, Sun Kook; Jeong, Young Uk; Cho, Sung Oh

    2000-10-01

    As a result of the cooperative research between the KAERI and Peking University, the key technologies of superconducting acceleration cavity and photoelectron gun have been developed for the application to high power free electron lasers. A 1.5-GHz, 1-cell superconducting RF cavity has been designed and fabricated by using pure Nb sheets. The unloaded Q values of the fabricated superconducting cavity has been measured to be 2x10{sup 9} at 2.5K, and 8x10{sup 9} at 1.8K. The maximum acceleration gradient achieved was 12 MeV/m at 2.5K, and 20MV/m at 1.8 K. A cryostat for the 1-cell superconducting cavity has been designed. As a source of electron beam, a DC photocathode electron gun has been designed and fabricated, which is composed of a photocathode evaporation chamber and a 100-keV acceleration chamber. The efficiency of the Cs2Te photocathode is 3% nominally at room temperature, 10% at 290 deg C. The superconducting photoelectron gun system developed has been estimated to be a good source of high-brightness electron beam for high-power free electron lasers.

  20. Dawn of the electronic age electrical technologies in the shaping of the modern world 1914 to 1945

    CERN Document Server

    Nebeker, Frederik

    2009-01-01

    Much of the infrastructure of today's industrialized world arose in the period from the outbreak of World War I to the conclusion of World War II. It was during these years that the capabilities of traditional electrical engineering became ubiquitous. Even more importantly, it was during this time that a new type of electrical engineering--electronics--emerged. Because of its applications in communications, entertainment, industry, science and medicine, and the military, the electronics industry became a major part of the economy. Dawn of the Electronic Age explores how this engineering knowledge and its main applications developed in various scientific, economic, and social contexts, and explains how each was profoundly affected by electrical technologies. It takes an international perspective and a narrative approach, unfolding the story chronologically. --from publisher description.

  1. Healthcare technology innovation adoption electronic health records and other emerging health information technology innovations

    CERN Document Server

    Daim, Tugrul U; Basoglu, Nuri; Kök, Orhun M; Hogaboam, Liliya

    2016-01-01

    This book aims to study the factors affecting the adoption and diffusion of Health Information Technology (HIT) innovation. It analyzes the adoption processes of various tools and applications, particularly Electronic Health Records (EHR), highlighting the impact on various sectors of the healthcare system, such as physicians, administration,  and patient care, while also identifying the various pitfalls and gaps in the literature. With the various challenges currently facing the United States healthcare system, the study, adoption and diffusion of healthcare technology innovation, particularly HIT, is imperative to achieving national goals. This book is organized into three sections. Section one reviews theories and applications for the diffusion of Health Care Technologies. Section two evaluates EHR technology, including the barriers and enables in adoption and alternative technologies. Finally, section three examines the factors impacting the adoption of EHR systems. This book will be a key source for stu...

  2. Technology of silicon charged-particle detectors developed at the Institute of Electron Technology (ITE)

    Science.gov (United States)

    Wegrzecka, Iwona; Panas, Andrzej; Bar, Jan; Budzyński, Tadeusz; Grabiec, Piotr; Kozłowski, Roman; Sarnecki, Jerzy; Słysz, Wojciech; Szmigiel, Dariusz; Wegrzecki, Maciej; Zaborowski, Michał

    2013-07-01

    The paper discusses the technology of silicon charged-particle detectors developed at the Institute of Electron Technology (ITE). The developed technology enables the fabrication of both planar and epiplanar p+-ν-n+ detector structures with an active area of up to 50 cm2. The starting material for epiplanar structures are silicon wafers with a high-resistivity n-type epitaxial layer ( ν layer - ρ < 3 kΩcm) deposited on a highly doped n+-type substrate (ρ< 0,02Ωcm) developed and fabricated at the Institute of Electronic Materials Technology. Active layer thickness of the epiplanar detectors (νlayer) may range from 10 μm to 150 μm. Imported silicon with min. 5 kΩcm resistivity is used to fabricate planar detectors. Active layer thickness of the planar detectors (ν) layer) may range from 200 μm to 1 mm. This technology enables the fabrication of both discrete and multi-junction detectors (monolithic detector arrays), such as single-sided strip detectors (epiplanar and planar) and double-sided strip detectors (planar). Examples of process diagrams for fabrication of the epiplanar and planar detectors are presented in the paper, and selected technological processes are discussed.

  3. Implementing MEMS technology for soft, (bio)electronics interfaces

    Science.gov (United States)

    Romeo, Alessia; Hofmeister, Yannick; Lacour, Stéphanie P.

    2014-06-01

    Soft, bioelectronics interfaces are broadly defined as microfabricated devices with mechanical properties suited to comply with biological tissues. There are many challenges associated with the development of such technology platforms. Simultaneously one must achieve reliable electronic performance, thermal and environmental stability, mechanical compliance, and biocompatibility. Materials and system architecture must be designed such that mechanical integrity and electrical functionality is preserved during fabrication, implementation and use of the interface. Depositing and patterning conventional device materials, ranging from inorganic to organic thin films as well as nanomaterials, directly onto soft elastomeric substrates enable electronic devices with enhanced mechanical flexibility. Success in fabrication also relies on a careful design of the mechanical architecture of the soft interface to minimize mechanical stresses in the most fragile materials.

  4. The Next-Generation Power Electronics Technology for Smart Grids

    Science.gov (United States)

    Akagi, Hirofumi

    This paper presents an overview of the next-generation power electronics technology for the Japanese-version smart grid. It focuses on a grid-level battery energy storage system, a grid-level STATCOM (STATic synchronous COMpensator), and a 6.6-kV BTB (Back-To-Back) system for power flow control between two power distribution feeders. These power electronic devices play an important role in achieving load frequency control and voltage regulation. Their circuit configurations based on modular multilevel cascade PWM converters are characterized by flexible system design, low voltage steps, and low EMI (Electro-Magnetic Interference) emission. Their downscaled laboratory models are designed, constructed, and tested to verify the viability and effectiveness of the circuit configurations and control methods.

  5. Control system by the technological electron Linac KUT-20

    CERN Document Server

    Akchurin, Y I; Gurin, V A; Demidov, N V

    2001-01-01

    The high-power technological electron linac KUT-20 was developed at the Science Research Complex 'Accelerator' of NSC KIPT. The linac consists of two 1.2 m length accelerating structures with a variable geometry and an injector. The latter comprises a diode electron gun,a klystron type buncher and an accelerating cavity.With a RF supply power at accelerating structure entries of 11 MW and with a current at the accelerator exit of 1A,the beam energy will be up to 20 MeV.An average beam power is planned to be 20 kW.All systems of the accelerator are controlled by a computerised control system. The program and technical complex consist of PC equipped with fast ADC control console, synchronization unit, microprocessor-operated complexes.

  6. 39 CFR 255.4 - Accessibility to electronic and information technology.

    Science.gov (United States)

    2010-07-01

    ... AND INFORMATION TECHNOLOGY § 255.4 Accessibility to electronic and information technology. (a) In... burden, that the electronic and information technology the agency procures allows— (1) Individuals with... 39 Postal Service 1 2010-07-01 2010-07-01 false Accessibility to electronic and...

  7. 23 CFR 950.5 - Requirement to use electronic toll collection technology.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Requirement to use electronic toll collection technology... agency using electronic toll collection technology must develop and implement reasonable methods to... electronic toll collection technology must develop, implement, and make publicly available privacy...

  8. 25 CFR 502.7 - Electronic, computer or other technologic aid.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Electronic, computer or other technologic aid. 502.7... DEFINITIONS OF THIS CHAPTER § 502.7 Electronic, computer or other technologic aid. (a) Electronic, computer or other technologic aid means any machine or device that: (1) Assists a player or the playing of a...

  9. 16 CFR 6.152 - Program accessibility: Electronic and information technology.

    Science.gov (United States)

    2010-01-01

    ... information technology. 6.152 Section 6.152 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION... information technology. (a) When developing, procuring, maintaining, or using electronic and information... electronic and information technology allows, regardless of the type of medium of the technology:...

  10. Cooperative Electronic Mail: Effective Communication Technology for Introductory Chemistry

    Science.gov (United States)

    Pence, Laura E.

    1999-05-01

    One drawback to using cooperative learning in the classroom is that it takes up class time and reduces the amount of content that can be covered during a semester. Cooperative electronic mail is an excellent alternate method of using cooperative learning that shifts the medium of interaction to the computer and encourages students to learn to communicate effectively through technology. In this project, three types of exercises were assigned, one prior to each exam. These three assignments were (i) an open-ended question, (ii) a traditional cooperative activity done electronically, and (iii) an exercise to allow students to write exam questions for each other. The average participation rate in the exercises was 90% over four semesters, which indicated that the project was an effective incentive to get students to use email regularly. The evaluations of the project were also extremely positive. One surprising result of the assessment was that female students gave even more favorable responses than men, suggesting that this project was an excellent way to encourage women to use computer technology.

  11. Emerging Two-Phase Cooling Technologies for Power Electronic Inverters

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, J.S.

    2005-08-17

    In order to meet the Department of Energy's (DOE's) FreedomCAR and Vehicle Technologies (FVCT) goals for volume, weight, efficiency, reliability, and cost, the cooling of the power electronic devices, traction motors, and generators is critical. Currently the power electronic devices, traction motors, and generators in a hybrid electric vehicle (HEV) are primarily cooled by water-ethylene glycol (WEG) mixture. The cooling fluid operates as a single-phase coolant as the liquid phase of the WEG does not change to its vapor phase during the cooling process. In these single-phase systems, two cooling loops of WEG produce a low temperature (around 70 C) cooling loop for the power electronics and motor/generator, and higher temperature loop (around 105 C) for the internal combustion engine. There is another coolant option currently available in automobiles. It is possible to use the transmission oil as a coolant. The oil temperature exists at approximately 85 C which can be utilized to cool the power electronic and electrical devices. Because heat flux is proportional to the temperature difference between the device's hot surface and the coolant, a device that can tolerate higher temperatures enables the device to be smaller while dissipating the same amount of heat. Presently, new silicon carbide (SiC) devices and high temperature direct current (dc)-link capacitors, such as Teflon capacitors, are available but at significantly higher costs. Higher junction temperature (175 C) silicon (Si) dies are gradually emerging in the market, which will eventually help to lower hardware costs for cooling. The development of high-temperature devices is not the only way to reduce device size. Two-phase cooling that utilizes the vaporization of the liquid to dissipate heat is expected to be a very effective cooling method. Among two-phase cooling methods, different technologies such as spray, jet impingement, pool boiling and submersion, etc. are being developed. The

  12. The New 3 E's of Education: Enabled, Engaged, Empowered--How Today's Students Are Leveraging Emerging Technologies for Learning. Speak Up 2010 National Findings: K-12 Students & Parents

    Science.gov (United States)

    Project Tomorrow, 2011

    2011-01-01

    For the past eight years, the Speak Up National Research Project has endeavored to stimulate new discussions around these kinds of questions and to provide a context to help education, parent, policy and business leaders think beyond today and envision tomorrow. This report is the first in a two part series to document the key national findings…

  13. Application of Electron Beam Surface Technologies in the Automotive Industry

    Institute of Scientific and Technical Information of China (English)

    Rolf Zenker; Anja Buchwalder

    2004-01-01

    Progress in the beam deflection technique opens up new possibilities for the application of electron beam (EB)surface and welding technologies in the automotive industry. This development is based on three-dimensional high-speed beam deflection and fully automatic online process control. So, in the EB surface treatment three-dimensional energy transfer fields can be realised which take into account the contour of a component, the conditions of heat conduction and the load conditions. High flexibility, precision and reproducibility are typical characteristics. High productivity is achieved by the simultaneous interaction of the EB in several processing areas or by carrying out several processes simultaneously. EB surface treatment is becoming more and more attractive and important especially in the automotive industry, and also in comparison to laser technologies. This paper deals with different EB surface technologies, for example hardening,remelting, surface alloying, dispersing or cladding of different materials such as steel, cast iron and different alloys of Al,Mg and Ti. Examples of applications in the automotive industry, especially engine components, will be discussed.

  14. Industrial Applications of Electronic Nose Technology in the Textiles Industry

    Science.gov (United States)

    Gibson, Tim; Chandler, Rob; Hallam, Viv; Simpson, Claire; Bentham, Martin

    2009-05-01

    Electronic nose technology has been available commercially for over 12 years but uptake in actual industrial applications has yet to be fully realised. We report 2 specific test protocols being used in the textiles industry that allow the direct measurement of anti-odour and anti-microbial capabilities of fabrics. Results will be shown for the standard anti-odour test which was specifically commissioned by Courtaulds PLC and which is being used by a number of manufacturers. The second test, which measures the anti-microbial and the anti-odour capabilities of fabrics simultaneously was developed in 2008. Results will be shown that clearly indicate both parameters are detected and proofs of anti-microbial capabilities will be given. These 2 tests will for the first time, enable the fulfillment of legislation that states for textile product claims, anti-odour and anti-microbial capabilities of fabrics must be scientifically substantiated.

  15. 21 CFR 1311.05 - Standards for technologies for electronic transmission of orders.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Standards for technologies for electronic... JUSTICE REQUIREMENTS FOR ELECTRONIC ORDERS AND PRESCRIPTIONS (Eff. 6-1-10) General § 1311.05 Standards for technologies for electronic transmission of orders. (a) A registrant or a person with power of attorney to...

  16. 48 CFR 352.239-73 - Electronic information and technology accessibility.

    Science.gov (United States)

    2010-10-01

    ... Clauses 352.239-73 Electronic information and technology accessibility. (a) As prescribed in 339.201-70(a), the Contracting Officer shall insert the following provision: Electronic and Information Technology... Board Electronic and Information (EIT) Accessibility Standards (36 CFR Part 1194), require that,...

  17. Photomasks today and tomorrow

    Science.gov (United States)

    Akiki, Geoffrey M.

    1995-07-01

    Successive generations of semiconductors have necessitated increasingly more complex technologies to produce the desired densities, speeds and other functions. The requirements placed on the photomasks used to produce large-scale integrated circuits have concurrently increased. These changing requirements have dictated photomask technology shifts from optical steppers to electron-beam and laser pattern generators, more tightly controlled processes, as well as the investigation of techniques such as phase-shifting. The outlook for the future indicates that requirements will continue to grow more complex. This presentation describes projected roadmaps for photomask specifications and some suggested strategies to meet these enhanced requirements. Potential problem areas are highlighted, as well as related issues pertaining to the mask equipment and materials industry. A brief overview is also given on the current challenges associated with photomasks with particular emphasis on half-micron DUV lithography, and the 0.35-, 0.25- and 0.18-micron challenges. Techniques such as optical proximity correction and phase-shifting are also discussed in terms of their applicability and insertion into manufacturing. The current status of X- ray masks, as well as projections for the technical requirements and capabilities associated with their manufacture, is included. An outline of the Microlithographic Mask Development (MMD) contract objectives is also presented.

  18. Reproducibility and relevance of future behavioral sciences should benefit from a cross fertilization of past recommendations and today's technology: "Back to the future"

    NARCIS (Netherlands)

    Spruijt, Berry; Peters, Suzanne; de Heer, Raymond; Pothuizen, Helen; van der Harst, Johanna

    2014-01-01

    Thanks to the discovery of novel technologies and sophisticated analysis tools we can now ‘see’ molecules, genes and even patterns of gene expression, which have resulted in major advances in many areas of biology. Recently, similar technologies have been developed for behavioral studies. However, t

  19. Educational Entrepreneurship Today

    Science.gov (United States)

    Hess, Frederick M., Ed.; McShane, Michael Q., Ed.

    2016-01-01

    In "Educational Entrepreneurship Today", Frederick M. Hess and Michael Q. McShane assemble a diverse lineup of high-profile contributors to examine the contexts in which new initiatives in education are taking shape. They inquire into the impact of entrepreneurship on the larger field--including the development and deployment of new…

  20. Educational Entrepreneurship Today

    Science.gov (United States)

    Hess, Frederick M., Ed.; McShane, Michael Q., Ed.

    2016-01-01

    In "Educational Entrepreneurship Today", Frederick M. Hess and Michael Q. McShane assemble a diverse lineup of high-profile contributors to examine the contexts in which new initiatives in education are taking shape. They inquire into the impact of entrepreneurship on the larger field--including the development and deployment of new…

  1. Teacher Perceptions of Electronic Portfolios as a Technology Integration Tool

    Science.gov (United States)

    Blackwell, John P., III.

    2013-01-01

    This qualitative case study explored the problem that teachers' attitudes and perceptions about technology often serve as barriers to successful technology integration in elementary school classrooms. Trends have showed that technology teachers directly responsible for teaching students technology skills are being laid off due to budget cuts…

  2. An AES Study of the Room Temperature Surface Conditioning of Technological Metal Surfaces by Electron Irradiation

    CERN Document Server

    Scheuerlein, C; Taborelli, M; Brown, A; Baker, M A

    2002-01-01

    The modifications to technological copper and niobium surfaces induced by 2.5 keV electron irradiation have been investigated in the context of the conditioning process occurring in particle accelerator ultra high vacuum systems. Changes in the elemental surface composition have been found using Scanning Auger Microscopy (SAM) by monitoring the carbon, oxygen and metal Auger peak intensities as a function of electron irradiation in the dose range 10-6 to 10-2 C mm-2. The surface analysis results are compared with electron dose dependent secondary electron and electron stimulated desorption yield measurements. Initially the electron irradiation causes a surface cleaning through electron stimulated desorption, in particular of hydrogen. During this period both the electron stimulated desorption and secondary electron yield decrease as a function of electron dose. When the electron dose exceeds 10-4 C mm-2 electron stimulated desorption yields are reduced by several orders of magnitude and the electron beam indu...

  3. Packaging Technologies for High Temperature Electronics and Sensors

    Science.gov (United States)

    Chen, Liangyu; Hunter, Gary W.; Neudeck, Philip G.; Beheim, Glenn M.; Spry, David J.; Meredith, Roger D.

    2013-01-01

    This paper reviews ceramic substrates and thick-film metallization based packaging technologies in development for 500degC silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chiplevel packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550degC. A 96% alumina based edge connector for a PCB level subsystem interconnection has also been demonstrated recently. The 96% alumina packaging system composed of chip-level packages and PCBs has been tested with high temperature SiC devices at 500degC for over 10,000 hours. In addition to tests in a laboratory environment, a SiC JFET with a packaging system composed of a 96% alumina chip-level package and an alumina printed circuit board mounted on a data acquisition circuit board was launched as a part of the MISSE-7 suite to the International Space Station via a Shuttle mission. This packaged SiC transistor was successfully tested in orbit for eighteen months. A spark-plug type sensor package designed for high temperature SiC capacitive pressure sensors was developed. This sensor package combines the high temperature interconnection system with a commercial high temperature high pressure stainless steel seal gland (electrical feed-through). Test results of a packaged high temperature capacitive pressure sensor at 500degC are also discussed. In addition to the pressure sensor package, efforts for packaging high temperature SiC diode-based gas chemical sensors are in process.

  4. New Electronic Technology Applied in Flexible Organic Optical System

    Directory of Open Access Journals (Sweden)

    Andre F. S. Guedes

    2014-02-01

    Full Text Available The synthesis and application of new organic materials, nanostructured, for developing technology based on organic devices, have been the main focus of the scientific community. In recent years, the first polymeric electronics products have entered the market (organic semiconductor materials and there are some electrochromic devices among them that have been called smart windows, once they control the passage of light or heat through a closed environment as an ordinary window. The main functional aspect of electrochromic devices, when being used in architectural and automotive industry, is to control the passage of light and temperature with thermal and visual comfort. These devices can be flexible and very thin, not containing heavy metals, and formed by layers of organic material deposited in several architectures. In this study, the electro-deposition of organic materials in the Polyaniline, PANI case, which provide stability in optical and electrical parameters, was utilized with the means of developing prototypes of organic electrochromic devices. These materials were characterized by: ultraviolet-visible spectroscopy absorption (UV-Vis, measurement of thickness (MT and electrical measurements (EM. This study aims to establish the relationship between the thickness of the active layer and the value of the electrical resistivity of the layer deposited through an electro-deposition technique. The experimental results enabled the equating of the electrical resistivity related to the thickness of the deposited layer. The linear fit of these results has expressed the thickness of the conducting layer, α, and the lowest value of the electrical resistivity, β, associated with the gap between the valence band and the conduction band. Thus, the results have demonstrated that, when the layer of organic material is completely conductive, we may obtain the thickness of the organic material deposited on the substrate.

  5. ELECTRONIC VOTING AS A FORM OF THE ELECTORAL INFORMATION AND COMMUNICATION TECHNOLOGIES: FOREIGN AND DOMESTIC EXPERIENCE

    OpenAIRE

    2015-01-01

    Electronic voting is considered in the context of information and communication technologies used during the electoral process. The foreign experience in implementing the e-voting technologies and prospects of its borrowings for use in Ukraine is analized. The basic advantages and disadvantages of electronic voting is underlined.

  6. Packaging Printing Today

    OpenAIRE

    Bolanča, Stanislav; Majnarić, Igor; Golubović, Kristijan

    2015-01-01

    Printing packaging covers today about 50% of all the printing products. Among the printing products there are printing on labels, printing on flexible packaging, printing on folding boxes, printing on the boxes of corrugated board, printing on glass packaging, synthetic and metal ones. The mentioned packaging are printed in flexo printing technique, offset printing technique, intaglio halftone process, silk – screen printing, ink ball printing, digital printing and hybrid print...

  7. Whay Montessori today?

    OpenAIRE

    Trabalzini, Paola

    2016-01-01

    The article describes some of the reasons why today in Italy, pedagogy and the Montessori method arise interest both in the academic context as well as among families. In the last century, at the beginning of the nineties, in the academic context, there was a more objective research of historiography on the human and intellectual experience of the Italian pedagogue that brought to the overcoming of the reconstruction through anecdotes. Nowadays families choose the Montessori method because th...

  8. EDITORIAL ELECTRONIC JOURNAL WITH OPEN ACCESS: A TECHNOLOGICAL LEAP

    Directory of Open Access Journals (Sweden)

    Julián Alberto Herrera

    2010-09-01

    Full Text Available The Faculty of Health at Universidad del Valle determined the conformation, functions, and competencies of the Scientific and Editorial Committees of the Colombia Médica journal (Resolution 099, July 07, 2009 HCF, permitting the naming of the Committees for the Journal and the opening of the internal call to name the Editor-in-Chief and the Associate Editors. Internal regulations institutionally define the types of publications of greatest interest, the frequency of each publication, and types of articles in regular and supplementary numbers, internal operations aspects; define stimuli for excellence in articles published with an award and editorial sanctions for plagiarism of intellectual property and redundant publication. In 1995, Colombia Médica adopted the web publication, now in 2010, fifteen years later, we have adopted we have adopted an agile and secure electronic management and publication system with open access that will permit editors, peers, and authors to work together from anywhere in the world, it will allow greater efficiency in real time with significant reduction of administrative costs. This system is currently used by 235 journals in the world, achieving more expeditious indexation of their articles, which is attractive for local researchers and for the international scientific community. For our Journal, this open electronic system is a true technological leap. The visibility of Colombia Médica has been traditionally good, given that it is indexed in 23 international data bases including the Institute for Scientific Information-ISI Thomson web of knowledge, and because it is a free journal that is easily accessed via the web. International Observatories have reported an increase in the number of downloads of complete articles by three times in the last year, which we feel is correlated to the four-fold increase of complete articles published in English. These facts, along with growing publication requests by authors

  9. EDITORIAL ELECTRONIC JOURNAL WITH OPEN ACCESS: A TECHNOLOGICAL LEAP

    Directory of Open Access Journals (Sweden)

    JULIAN ALBERTO HERRERA

    2010-03-01

    Full Text Available The Faculty of Health at Universidad del Valle determined the conformation, functions, and competencies of the Scientific and Editorial Committees of the Colombia Médica journal (Resolution 099, July 07, 2009 HCF, permitting the naming of the Committees for the Journal and the opening of the internal call to name the Editor-in-Chief and the Associate Editors. Internal regulations institutionally define the types of publications of greatest interest, the frequency of each publication, and types of articles in regular and supplementary numbers, internal operations aspects; define stimuli for excellence in articles published with an award and editorial sanctions for plagiarism of intellectual property and redundant publication.In 1995, Colombia Médica adopted the web publication, now in 2010, fifteen years later, we have adopted we have adopted an agile and secure electronic management and publication system with open access that will permit editors, peers, and authors to work together from anywhere in the world, it will allow greater efficiency in real time with significant reduction of administrative costs. This system is currently used by 235 journals in the world, achieving more expeditious indexation of their articles, which is attractive for local researchers and for the international scientific community. For our Journal, this open electronic system is a true technological leap.The visibility of Colombia Médica has been traditionally good, given that it is indexed in 23 international data bases including the Institute for Scientific Information-ISI Thomson web of knowledge, and because it is a free journal that is easily accessed via the web. International Observatories have reported an increase in the number of downloads of complete articles by three times in the last year, which we feel is correlated to the four-fold increase of complete articles published in English. These facts, along with growing publication requests by authors from

  10. Clean Cities Now, Vol. 20, No. 2, Winter 2017 - Capitalizing on Core Strengths & New Technologies for Today's Mobility Systems

    Energy Technology Data Exchange (ETDEWEB)

    2017-01-01

    Clean Cities Now is the official semi-annual newsletter of Clean Cities, an initiative designed to reduce petroleum consumption in the transportation sector by advancing the use of alternative and renewable fuels, fuel economy improvements, idle-reduction measures, and new technologies, as they emerge.

  11. Research on Supporting Functions of the Information Technology on Electronic medical record

    Directory of Open Access Journals (Sweden)

    Hu Sheng Li

    2016-01-01

    Full Text Available Objective: Promote further utilization of information technology in quality control of the electronic medical record and provide forceful technological supports for medical quality control. Method: research existing problems in quality control of electronic medical record at present, put forward that the information technology should be used sufficiently, integration with other systems should be completed, quality control rules should be built and quality control time should be set and finally point out the key construction element of information technology to provide supports. Result: the article points out that further utilization of information technology in quality control of EMR should start from the standard, structuralized and paperless electronic medical record, construction of the communication platform and application of high technology. Conclusion: it is of great significance to promote improvement of quality control level of the electronic medical record and improve continuously medical quality.

  12. Advanced Relay Design and Technology for Energy-Efficient Electronics

    Science.gov (United States)

    2011-07-07

    photolithography steps were performed using a 5X Chrome reticle (6" X 6" X 0.25") with an anti-reflective coating in an ASML Deep-Ultra- Violet (DUV) 5500/90...1.2: Courtesy of Shekhar Y. Borkar at Intel, Corp. Today, typical CMOS microprocessors operate at around the power density of a nuclear reactor, e.g...W /c m 2 ] Year 104 103 102 101 100 Nuclear Reactor Rocket Nozzle Sun’s Surface P6 Pentium® 8086 486 286 Core 2 3 The paradigm shift to multi

  13. International Conference on Emerging Research in Electronics, Computer Science and Technology

    CERN Document Server

    Sheshadri, Holalu; Padma, M

    2014-01-01

    PES College of Engineering is organizing an International Conference on Emerging Research in Electronics, Computer Science and Technology (ICERECT-12) in Mandya and merging the event with Golden Jubilee of the Institute. The Proceedings of the Conference presents high quality, peer reviewed articles from the field of Electronics, Computer Science and Technology. The book is a compilation of research papers from the cutting-edge technologies and it is targeted towards the scientific community actively involved in research activities.

  14. Electronic Teaching Portfolios: Technology Skills + Portfolio Development--Do They = Powerful Preservice Teachers?

    Science.gov (United States)

    Capraro, Mary Margaret

    2006-01-01

    Electronic portfolios are a "collection of work captured by electronic means, that serves as an exhibit of individual efforts, progress, and achievements in one or more areas" (Weidmer, 1998, p. 586). Because of the rapid growth and updates in technology, keeping electronic portfolios is becoming increasingly common in a variety of educational…

  15. USMC Electronic Warfare 2025: Trading Expertise for Advanced Technology

    Science.gov (United States)

    2011-04-15

    airborne electronic warlare during the transition period away from legacy equipment. EA-6B pilots and Electroilic Countermeasures Officers ( ECMOs ...Electronic Warfare (EW) capability. As an EA-6B Electronic Countenneasures Officer ( ECMO ), I anticipate that both the United States Marine Corps and all... ECMOs . An increased workload for Radio Battalion will have the same effect that the assumption of an additional function of Marine aviation will have on

  16. Integration of electronic nose technology with spirometry: validation of a new approach for exhaled breath analysis

    NARCIS (Netherlands)

    de Vries, R.; Brinkman, P.; van der Schee, M.P.; Fens, N.; Dijkers, E.; Bootsma, S.K.; de Jongh, Franciscus H.C.; Sterk, P.J.

    2015-01-01

    New 'omics'-technologies have the potential to better define airway disease in terms of pathophysiological and clinical phenotyping. The integration of electronic nose (eNose) technology with existing diagnostic tests, such as routine spirometry, can bring this technology to 'point-of-care'. We

  17. Reproducibility and relevance of future behavioral sciences should benefit from a cross fertilization of past recommendations and today's technology: "Back to the future".

    Science.gov (United States)

    Spruijt, Berry M; Peters, Suzanne M; de Heer, Raymond C; Pothuizen, Helen H J; van der Harst, Johanneke E

    2014-08-30

    Thanks to the discovery of novel technologies and sophisticated analysis tools we can now 'see' molecules, genes and even patterns of gene expression, which have resulted in major advances in many areas of biology. Recently, similar technologies have been developed for behavioral studies. However, the wide implementation of such technological progress in behavioral research remains behind, as if there are inhibiting factors for accepting and adopting available innovations. The methods of the majority of studies measuring and interpreting behavior of laboratory animals seem to have frozen in time somewhere in the last century. As an example of the so-called classical tests, we will present the history and shortcomings of one of the most frequently used tests, the open field. Similar objections and critical remarks, however, can be made with regard to the elevated plus maze, light-dark box, various other mazes, object recognition tests, etc. Possible solutions and recommendations on how progress in behavioral neuroscience can be achieved and accelerated will be discussed in the second part of this review.

  18. Packaging Technology for SiC High Temperature Electronics

    Science.gov (United States)

    Chen, Liang-Yu; Neudeck, Philip G.; Spry, David J.; Meredith, Roger D.; Nakley, Leah M.; Beheim, Glenn M.; Hunter, Gary W.

    2017-01-01

    High-temperature environment operable sensors and electronics are required for long-term exploration of Venus and distributed control of next generation aeronautical engines. Various silicon carbide (SiC) high temperature sensors, actuators, and electronics have been demonstrated at and above 500 C. A compatible packaging system is essential for long-term testing and application of high temperature electronics and sensors in relevant environments. This talk will discuss a ceramic packaging system developed for high temperature electronics, and related testing results of SiC integrated circuits at 500 C facilitated by this high temperature packaging system, including the most recent progress.

  19. High Power Electronics - Key Technology for Wind Turbines

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Ma, Ke

    2014-01-01

    reliability challenges for the future wind turbines are explained. It is concluded that the wind turbine behavior/performance can be significantly improved by introducing power electronics, and there will be higher requirements for the power electronics performances in wind power application....

  20. High Power Electronics - Key Technology for Wind Turbines

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Ma, Ke

    2014-01-01

    reliability challenges for the future wind turbines are explained. It is concluded that the wind turbine behavior/performance can be significantly improved by introducing power electronics, and there will be higher requirements for the power electronics performances in wind power application....

  1. Concerned Technology 1989: Electronic Aids for People with Special Needs.

    Science.gov (United States)

    Sandhu, Jim Singh; Richardson, Steve

    In light of the implementation of Section 508 of the Rehabilitation Amendments Act of 1986 requiring that all electronic equipment purchased by the U.S. Government be accesible to the handicapped. this directory lists several hundred electronic aids for the disabled. The introduction humorously reviews the state of the art in software, artificial…

  2. Technology transfer present and futures in the electronic arts

    Directory of Open Access Journals (Sweden)

    Brian Degger

    2008-01-01

    Full Text Available We are entering an era where creating the fantastical is possible in the arts. In the areas of mixed reality and biological arts, responsive works are created based on advances in basic science and technology. This is enabling scientists and artists to pose new questions. As the time between discovery and application is so short, artists need imaginative ways of accessing new technology in order to critique and use it.These are the new paints that the majority of artists cannot afford or access, technology to enable cloning of DNA, to print channels on a chip, to access proprietary 3G networks. Currently, partnerships or residencies are used to facilitate artist’s access to these technologies. What would they do if technology was available that enabled them to make any art work they so desire? Are the limitations in current technology an advantage rather than a disadvantage in some of their works? Does interaction with technologists make their work more robust? Are there disadvantages? How do they get access to the technology they require? Open source or proprietary? Or have they encountered the situation where their vision is greater than technology allows. When their work breaks because of this fact, is their art broken? Blast Theory (Brighton,UK, FoAM(Brussels, Belgium and Amsterdam, Netherlands, SymbioticA (Perth, Australia are organisations pushing technological boundaries in the service of art. This paper addresses some questions of technology transfer in relation to recent artworks, particularly I like Frank in Adelaide (Blast Theory, transient reality generators (trg (FoAM and Multi electrode array artist (MeART (SymbioticA.

  3. Women in engineering conference: capitalizing on today`s challenges

    Energy Technology Data Exchange (ETDEWEB)

    Metz, S.S.; Martins, S.M. [eds.

    1996-06-01

    This document contains the conference proceedings of the Women in Engineering Conference: Capitalizing on Today`s Challenges, held June 1-4, 1996 in Denver, Colorado. Topics included engineering and science education, career paths, workplace issues, and affirmative action.

  4. Handbook of polymer coatings for electronics chemistry, technology and applications

    CERN Document Server

    Licari, James J

    1990-01-01

    This completely revised edition remains the only comprehensive treatise on polymer coatings for electronics. Since the original edition, the applications of coatings for the environmental protection of electronic systems have greatly increased, largely driven by the competitive need to reduce costs, weight and volume. The demands for high-speed circuits for the rapid processing of signals and data, high-density circuits for the storage and retrieval of megabits of memory, and the improved reliability required of electronics for guiding and controlling weapons and space vehicles have triggered

  5. Adhesives technology for electronic applications materials, processing, reliability

    CERN Document Server

    Licari, James J

    2011-01-01

    Adhesives are widely used in the manufacture and assembly of electronic circuits and products. Generally, electronics design engineers and manufacturing engineers are not well versed in adhesives, while adhesion chemists have a limited knowledge of electronics. This book bridges these knowledge gaps and is useful to both groups. The book includes chapters covering types of adhesive, the chemistry on which they are based, and their properties, applications, processes, specifications, and reliability. Coverage of toxicity, environmental impacts and the regulatory framework make this book par

  6. New Possibilities of Power Electronic Structures Using SiC Technology

    OpenAIRE

    2006-01-01

    This paper is dedicated to the recent unprecedented boom of SiC electronic technology. The contribution deals with brief survey of those properties. In particular, the differences (both good and bad) between SiC electronics technology and well-known silicon VLSI technology are highlighted. Projected performance benefits of SiC electronics are given for several large-scale applications on the end of the contribution. The basic properties of SiC material have been discussed already on the begin...

  7. Today's Business Simulation Industry

    Science.gov (United States)

    Summers, Gary J.

    2004-01-01

    New technologies are transforming the business simulation industry. The technologies come from research in computational fields of science, and they endow simulations with new capabilities and qualities. These capabilities and qualities include computerized behavioral simulations, online feedback and coaching, advanced interfaces, learning on…

  8. Application of electron beam technology in improving sewage water ...

    African Journals Online (AJOL)

    user

    (electron beam) treatment of the wastewater was found to be very effective in reducing ... The experimental results elucidated that the reduction of biological oxygen ... can find its application either in agriculture for irrigation or in industry sector.

  9. The development of technology for recycling of electronic scrap

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Hyo-Shin; Kim, Won-Baek; Sohn, Yong-Uhn [Korea Institute of Geology Mining and Materials, Taejon (KR)] (and others)

    1999-12-01

    Electronic devices, especially computer becomes an essential tools for home and industries entering the information era. The number of computers exceed over 100 million, hence, the amount of end of life(EOL) computer and electronic scrap is increasing. These wastes and scraps include products rejected from manufacturing processes and obstacle computers. Owing to a short life cycle of electronic products and rapid growth of electronic industries, the number of domestic EOL computers goes beyond a million and its disposal causes an environmental problems. Therefore, this recycling is considered to play an important role from the viewpoint of environmental preservation as well as reusable resources. The process development for the recovery of valuable materials and minimization of waste from electronic scrap has been carried out. In the first year of three year project, physical separation such as shredding, crushing, and magnetic separation is established to reclaim valuable materials effectively. Then, hydro- and pyrometallurgical processes are employed to recover valuable metals from electronic scrap. First, metallic and nonmetallic portion are separated from PCBs by a newly designed shredder to prevent hazardous organic materials from further chemical treatment. The optimum conditions for each unit process were found in terms of separation ratio, energy consumption, recovery rate, etc. (author). 92 refs., 24 tabs., 39 figs.

  10. Who We Are: Today's Students Speak Out

    Science.gov (United States)

    Blandford, Ayoka

    2012-01-01

    Today's students have been nicknamed the "Digital Generation," "Millennials," "Net Generation" and "Generation Next." They are frequently identified by their technological prowess and seem to work well with multiple stimuli (for example, designing a web site while listening to iTunes and responding to texts). While many research studies have been…

  11. Who We Are: Today's Students Speak Out

    Science.gov (United States)

    Blandford, Ayoka

    2012-01-01

    Today's students have been nicknamed the "Digital Generation," "Millennials," "Net Generation" and "Generation Next." They are frequently identified by their technological prowess and seem to work well with multiple stimuli (for example, designing a web site while listening to iTunes and responding to texts). While many research studies have been…

  12. General Relativity Today

    Science.gov (United States)

    Blandford, Roger D.

    2016-01-01

    A hundred years after its birth, general relativity has become a highly successful theory in the sese that it has passed many experimental and observational tests and finds widespread application to diverse set of cosmic phenomena. It remains an accurate research field as more tests are deployed, epitomized by the exciting prospect of detecting gravitational radiation directly. General realtivity is the essential foundation of modern cosmology and underlies our detailed description of the black holes and neutron stars that are ultimately responsible for the most powerful and dramatic cosmic sources. The interface with physics on both the largest and the smallest scales continues to be very fertile. In this talk I will attempt to highlight some key steps along the way to general relativity today.

  13. Vitamin food fortification today

    Directory of Open Access Journals (Sweden)

    Maria de Lourdes Samaniego-Vaesken

    2012-04-01

    Full Text Available Historically, food fortification has served as a tool to address population-wide nutrient deficiencies such as rickets by vitamin D fortified milk. This article discusses the different policy strategies to be used today. Mandatory or voluntary fortification and fortified foods, which the consumer needs, also have to comply with nutritional, regulatory, food safety and technical issues. The ‘worldwide map of vitamin fortification’ is analysed, including differences between develop and developing countries. The vitamins, folate and vitamin D, are taken as practical examples in the review of the beneficial effect of different strategies on public health. The importance of the risk–benefit aspect, as well as how to identify the risk groups, and the food vehicles for fortification is discussed.

  14. The Networking and Information Technology Research and Development NITRD Program 2012 Strategic Plan

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — Information technology IT computers, wired and wireless digital networks, electronic data and information, IT devices and systems, and software applications?today...

  15. REVIEW: Advances in Electronic Marketing

    OpenAIRE

    YILMAZ, Reviewed By Dr. Ayhan

    2015-01-01

    There are many challenges facing organizations today as they incorporate electronic marketing methods into their strategy. Advances in Electronic Marketing examines these challenges within three major themes: the global environment, the strategic/technological realm, and the buyer behavior of online consumers.

  16. REVIEW: Advances in Electronic Marketing

    OpenAIRE

    YILMAZ, Reviewed By Dr. Ayhan

    2005-01-01

    There are many challenges facing organizations today as they incorporate electronic marketing methods into their strategy. Advances in Electronic Marketing examines these challenges within three major themes: the global environment, the strategic/technological realm, and the buyer behavior of online consumers.

  17. Electronic aroma detection technology for forensic and law enforcement applications

    Energy Technology Data Exchange (ETDEWEB)

    Barshick, S.-A.; Griest, W.H.; Vass, A.A.

    1996-12-31

    A major problem hindering criminal investigations is the lack of appropriate tools for proper crime scene investigations. Often locating important pieces of evidence means relying on the ability of trained detection canines. Development of analytical technology to uncover and analyze evidence, potentially at the scene, could serve to expedite criminal investigations, searches, and court proceedings. To address this problem, a new technology based on gas sensor arrays was investigated for its applicability to forensic and law enforcement problems. The technology employs an array of sensors that respond to volatile chemical components yielding a characteristic `fingerprint` pattern representative of the vapor- phase composition of a sample. Sample aromas can be analyzed and identified using artificial neural networks that are trained on known aroma patterns. Several candidate applications based on known technological needs of the forensic and law enforcement communities have been investigated. These applications have included the detection of aromas emanating from cadavers to aid in determining time since death, drug detection for deterring the manufacture, sale, and use of drugs of abuse, and the analysis of fire debris for accelerant identification. The results to date for these applications have been extremely promising and demonstrate the potential applicability of this technology for forensic use.

  18. Electronic aroma detection technology for forensic and law enforcement applications

    Science.gov (United States)

    Barshick, Stacy-Ann; Griest, Wayne H.; Vass, Arpad A.

    1997-02-01

    A major problem hindering criminal investigations is the lack of appropriate tools for proper crime scene investigations. Often locating important pieces of evidence means relying on the ability of trained detection canines. Development of analytical technology to uncover and analyze evidence, potentially at the scene, could serve to expedite criminal investigations, searches, and court proceedings. To address this problem, a new technology based on gas sensor arrays was investigated for its applicability to forensic and law enforcement problems. The technology employs an array of sensors that respond to volatile chemical components yielding a characteristic 'fingerprint' pattern representative of the vapor-phase composition of a sample. Sample aromas can be analyzed and identified using artificial neural networks that are trained on known aroma patterns. Several candidate applications based on known technological needs of the forensic and law enforcement communities have been investigated. These applications have included the detection of aromas emanating from cadavers to aid in determining time since death, drug detection for deterring the manufacture, sale, and use of drugs of abuse, and the analysis of fire debris for accelerant identification. The result to date for these applications have been extremely promising and demonstrate the potential applicability of this technology for forensic use.

  19. A primer for accessing and using electronic communications technology.

    Science.gov (United States)

    1996-01-01

    This supplement to "The Family Planning Manager" provides basic information for program managers on the equipment, training, and financial resources required to use electronic communications. Boxed sections compare the costs and services of selected communications providers in various countries and present detailed instructions on how to request a document by e-mail. The type of software selected--shell account, store-and-forward connection, or Serial Line Internet Protocol--depends on the type of connection with the communications provider. Among the issues to consider in assessing providers are service costs, telephone charges, equipment costs, modem speed, software, service support, and reputation for good service. Setting up, maintaining, and using electronic communications present new management challenges, especially in terms of providing adequate technical support, training, and funding. The supplement concludes with a glossary of terms commonly used in electronic communications.

  20. Simulation Tools for Power Electronics Courses Based on Java Technologies

    Science.gov (United States)

    Canesin, Carlos A.; Goncalves, Flavio A. S.; Sampaio, Leonardo P.

    2010-01-01

    This paper presents interactive power electronics educational tools. These interactive tools make use of the benefits of Java language to provide a dynamic and interactive approach to simulating steady-state ideal rectifiers (uncontrolled and controlled; single-phase and three-phase). Additionally, this paper discusses the development and use of…

  1. Size Control Technology of Silver Nanoparticles Using Electron Beam Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Hyun Suk; Kim, Byungnam; Kim, Hye Won; Koo, Yong Hwan; Lee, Byung Cheol [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, Ji Hyun [Univ. of Science and Technology, Daejeon (Korea, Republic of); Bae, Hyung Bin [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Park, Changmoon [Chungnam National Univ., Daejeon (Korea, Republic of)

    2013-12-15

    The manufacturing of silver nanoparticles using an electron beam is easy, fast, and highly productive, and it is possible at room temperature with no chemical residuals. Its various advantages therefore make this an important method for manufacturing nanoparticles such as silver, copper, and platinum. In particular, despite the use of electron beam irradiation, the results show that this method makes it possible to produce silver nanoparticles at low cost since low beam energy and low doses are used. This means that middle and high-energy electron beam accelerators are very expensive, but a low-energy electron beam accelerator has a relatively low cost of around 4-5 times, and mass production for a flow reaction without the need for extra radiation shielding is possible. Silver nanoparticles are of great interest to many researchers owing to their ability to be used in many applications such as catalysis, nanoelectronics, optical filters, electromagnetic interference shielding, surface Raman scattering, medical supplies, fabrics, cosmetics, hygiene and kitchen supplies, and electric home appliances.

  2. Simulation Tools for Power Electronics Courses Based on Java Technologies

    Science.gov (United States)

    Canesin, Carlos A.; Goncalves, Flavio A. S.; Sampaio, Leonardo P.

    2010-01-01

    This paper presents interactive power electronics educational tools. These interactive tools make use of the benefits of Java language to provide a dynamic and interactive approach to simulating steady-state ideal rectifiers (uncontrolled and controlled; single-phase and three-phase). Additionally, this paper discusses the development and use of…

  3. Application of Nonlocal Electron Kinetics to Plasma Technologies

    Science.gov (United States)

    Kaganovich, Igor D.

    2011-10-01

    Partially ionized plasmas are typically in a highly non-equilibrium thermodynamic state: the electrons are not in equilibrium with the neutral particle species or the ions, and the electrons are also not in equilibrium within their own ensemble, which results in a significant departure of the electron velocity distribution function (EVDF) from a Maxwellian. These non-equilibrium conditions provide considerable freedom to choose optimal plasma parameters for applications, which make gas-discharge plasmas remarkable tools for a variety of plasma applications, including plasma processing, discharge lighting, plasma propulsion, particle beam sources, and nanotechnology. Significant progress in understanding the formation of non-Maxwellian EVDF in the self-consistent electric fields has been one of the major achievements in the low-temperature plasmas during the last decade. This progress was made possible by a synergy between full-scale particle-in-cell simulations, analytical models, and experiments. Specific examples include rf discharges, dc discharges with auxiliary electrodes, Hall thruster discharges. In each example, nonlocal kinetic effects are identified as the main mechanisms responsible for the surprising degree of discharge self-organization. These phenomena include: explosive generation of cold electrons with rf power increase in low-pressure rf discharges; abrupt changes in discharge structure with increased bias voltage on a third electrode in a dc discharge with hot cathode; absence of a steady-state regime in Hall thruster discharges with intense secondary electron emission due to coupling of the sheath properties and the EVDF. In collaboration with Y. Raitses, A.V. Khrabrov, M. Campanell, V. I. Demidov, D. Sydorenko, I. Schweigert, and A. S. Mustafaev. Research supported by the U.S. Department of Energy.

  4. High power electron and ion beam research and technology

    Energy Technology Data Exchange (ETDEWEB)

    Nation, J.A.; Sudan, R.N. (eds.)

    1977-01-01

    Topics covered in volume II include: collective accelerators; microwaves and unneutralized E-beams; technology of high-current E-beam accelerators and laser applications of charged-particle beams. Abstracts of twenty-nine papers from the conference were prepared for the data base in addition to six which appeared previously. (GHT)

  5. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  6. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  7. Power Electronics

    DEFF Research Database (Denmark)

    Iov, Florin; Ciobotaru, Mihai; Blaabjerg, Frede

    2008-01-01

    is to change the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. The other is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss the most...... emerging renewable energy sources, wind energy, which by means of power electronics are changing from being a minor energy source to be acting as an important power source in the energy system. Power electronics is the enabling technology and the presentation will cover the development in wind turbine...... technology from kW to MW, discuss which power electronic solutions are most feasible and used today....

  8. E-learning. Today and tomorrow; E-Learning. Jetzt und in Zukunft

    Energy Technology Data Exchange (ETDEWEB)

    Gelbke, Silvana [Kraftwerksschule e.V., Essen (Germany)

    2010-07-01

    Today, new technologies revolutionize the way of handling information, exchanging knowledge and learning. The definition of the term ''e-learning'' mostly comprehends teaching and learning using a range of electronic media (Internet, CD-ROMs). However, further differentiation is necessary to describe the entire spectrum of methods included in this term. These different approaches are reflected in their implementation by the companies presented. (orig.)

  9. Methanol Asinger's vision today

    CERN Document Server

    Bertau, Martin; Plass, Ludolf; Schmidt, Friedrich; Wernicke, Hans-Jürgen

    2014-01-01

    Methanol - The Chemical and Energy Feedstock of the Future offers a visionary yet unbiased view of methanol technology. Based on the groundbreaking 1986 publication ""Methanol"" by Friedrich Asinger, this book includes contributions by more than 40 experts from industry and academia. The authors and editors provide a comprehensive exposition of methanol chemistry and technology which is useful for a wide variety of scientists working in chemistry and energy related industries as well as academic researchers and even decision-makers and organisations concerned with the future of chemical and e

  10. Wind power today

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    This publication highlights initiatives of the US DOE`s Wind Energy Program. 1997 yearly activities are also very briefly summarized. The first article describes a 6-megawatt wind power plant installed in Vermont. Another article summarizes technical advances in wind turbine technology, and describes next-generation utility and small wind turbines in the planning stages. A village power project in Alaska using three 50-kilowatt turbines is described. Very brief summaries of the Federal Wind Energy Program and the National Wind Technology Center are also included in the publication.

  11. Creating pure nanostructures from electron-beam-induced deposition using purification techniques: a technology perspective

    NARCIS (Netherlands)

    Botman, A.; Mulders, J.J.L.; Hagen, C.W.

    2009-01-01

    The creation of functional nanostructures by electron-beam-induced deposition (EBID) is becoming more widespread. The benefits of the technology include fast ‘point-and-shoot’ creation of three-dimensional nanostructures at predefined locations directly within a scanning electron microscope. One sig

  12. DEMONSTRATION BULLETIN: HIGH VOLTAGE ELECTRON BEAM TECHNOLOGY - HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.

    Science.gov (United States)

    The high energy electron beam irradiation technology is a low temperature method for destroying complex mixtures of hazardous organic chemicals in solutions containing solids. The system consists of a computer-automated, portable electron beam accelerator and a delivery system. T...

  13. European Power Electronic conference in Aalborg, Denmark - 1000 participants discussing the future energy technologies

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Munk-Nielsen, Stig

    2007-01-01

    The European Power Electronics and Adjustable Speed Drives conference with technical sponsorship of IEEE Industrial Electronic Society has been held in Aalborg, Denmark, during the first days of September 2007 with an overwhelming success and participation. It was hosted by Aalborg University......'s Institute of Energy Technology....

  14. Advanced methods for teaching electronic-nose technologies to diagnosticians and clinical laboratory technicians

    Science.gov (United States)

    Alphus D. Wilson

    2012-01-01

    Electronic-detection technologies and instruments increasingly are being utilized in the biomedical field to perform a wide variety of clinical operations and laboratory analyses to facilitate the delivery of health care to patients. The introduction of improved electronic instruments for diagnosing diseases and for administering treatments has required new training of...

  15. Electron Emitter for small-size Electrodynamic Space Tether using MEMS Technology

    DEFF Research Database (Denmark)

    Fleron, René A. W.; Blanke, Mogens

    2004-01-01

    system with focus on electron emitter design and manufacture using micro-electro-mechanical- system (MEMS) technology. The paper addresses the system concepts of a small size electrodynamic tether mission and shows a novel electron emitter for the 1-2 mA range where altitude can be effectively affected...

  16. Linking emerging hazardous waste technologies with the electronic information era

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, B.E.; Suk, W.A. [National Institute of Environmental Health Sciences, Research Triangle Park, NC (United States); Blackard, B. [Technology Planning and Management Corp., Durham, NC (United States)

    1996-12-31

    In looking to the future and the development of new approaches or strategies for managing hazardous waste, it is important to understand and appreciate the factors that have contributed to current successful approaches. In the United States, several events in the last two decades have had a significant impact in advancing remediation of hazardous waste, including environmental legislation, legislative reforms on licensing federally funded research, and electronic transfer of information. Similar activities also have occurred on a global level. While each of these areas is significant, the electronic exchange of information has no national boundaries and has become an active part of major hazardous waste research and management programs. It is important to realize that any group or society that is developing a comprehensive program in hazardous waste management should be able to take advantage of this advanced approach in the dissemination of information. 6 refs., 1 tab.

  17. Fundamental Research on Convective Heat Transfer in Electronic Cooling Technology

    Institute of Scientific and Technical Information of China (English)

    C.F.Ma; Y.P.Gan; 等

    1992-01-01

    During the past six years comprehensive research programs have been conducted at the Beijing Polytechnic University to provide a better understanding of heat transfer characteristics of existing and condidate cooling techniques for electronic and microelestanding of heat transfer characteristics of existing and condidate cooling techniques for electronic and microleectronic devices.This paper provides a review and summary of the programs with emphasis on direct liquid cooling.Included in this review are the heat transfer investigations related to the following cooling modes:liquid free,mixed and forced convection.liquid jet impingement,flowing liquid film cooling,pool boiling,spray cooling,foreign gas jet impingement in liquid pool,and forced convection air-cooling.

  18. A decision technology system for health care electronic commerce.

    Science.gov (United States)

    Forgionne, G A; Gangopadhyay, A; Klein, J A; Eckhardt, R

    1999-08-01

    Mounting costs have escalated the pressure on health care providers and payers to improve decision making and control expenses. Transactions to form the needed decision data will routinely flow, often electronically, between the affected parties. Conventional health care information systems facilitate flow, process transactions, and generate useful decision information. Typically, such support is offered through a series of stand-alone systems that lose much useful decision knowledge and wisdom during health care electronic commerce (e-commerce). Integrating the stand-alone functions can enhance the quality and efficiency of the segmented support, create synergistic effects, and augment decision-making performance and value for both providers and payers. This article presents an information system that can provide complete and integrated support for e-commerce-based health care decision making. The article describes health care e-commerce, presents the system, examines the system's potential use and benefits, and draws implications for health care management and practice.

  19. JPRS Report, Science & Technology, USSR: Electronics & Electrical Engineering.

    Science.gov (United States)

    2007-11-02

    Parameters of Solar System Power Supply for the Cuban Environment fIZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENII: ENERGETIKA No 4, Apr 87] 29 Correlation...Sedov; ELEKTROSVYAZ, Oct 87] 41 5^AYS 8 ~ 003 7 USSR: Electronics & Electrical Engineering Sonics, Ultrasonics Matching Interdigital ...in the cells of the periodic structure makes it possible to approximate the directional pattern of the output radiation. Results showed that in a

  20. Android and PSoC Technology Applied to Electronic Tongue Development

    OpenAIRE

    2015-01-01

    Nowadays, in the food industry, analyzing the quality of alimentary products has become a necessity. As a result, producers have been searching for new accurate methods to analyze food quality. The development of bio-inspired devices (electronic nose and electronic tongue) is a potential alternative to supply this need. The current project shows the development of a prototype circuit based on PSoC technology, which is used as a signal processing stage in an electronic tongue device with the a...

  1. Overview of European technology in computers, telecommunications, and electronics

    Science.gov (United States)

    Blackburn, J. F.

    1990-05-01

    The emergence of the personal computer, the growing use of distributed systems, and the increasing demand for supercomputers and mini-supercomputers are causing a profound impact on the European computer market. An equally profound development in telecommunications is the integration of voice, data, and images in the public network systems - the Integrated Service Digital Network (ISDN). The programs being mounted in Europe to meet the challenges of these technologies are described. The Europe-wide trends and actions with respect to computers, telecommunications, and microelectronics are discussed, and the major European collaborative programs in these fields are described. Specific attention is given to the European Strategic Programme for Research and Development in Information (ESPRIT); Research in Advanced Communications for Europe (RACE); European Research Coordination Agency (Eureka) programs; Joint European Submicron Silicon Initiative (JESSI); and the recently combined programs Basic Research Industrial Technologies in Europe/European Research in Advanced Materials (BRITE/EURAM).

  2. Understanding Dynamic Competitive Technology Diffusion in Electronic Markets

    Science.gov (United States)

    Zhang, Cheng; Song, Peijian; Xu, Yunjie; Xue, Ling

    The extant literature on information technology (IT) diffusion has largely treated technology diffusion as a generic and independent process. This study, in contrast, examines the diffusion of different IT products with brand differentiation and competition. Drawing upon existing theories of product diffusion, we propose a research model to capture the dynamics of the competitive diffusion of web-based IT products and validate it with longitudinal field data of e-business platforms. Our findings suggest that IT product diffusion can be better predicted by a competitive model than by an independent-diffusion-process model. This research extends IT research to the context of competitive diffusion and provides practitioners an effective model to predict the dissemination of their products. The research also suggests the existence of asymmetric interactions among competing products, prompting scholars and practitioners to pay attention to the influence of competing products when making forecast of their product market.

  3. Large space systems technology electronics: Data and power distribution

    Science.gov (United States)

    Dunbar, W. G.

    1980-01-01

    The development of hardware technology and manufacturing techniques required to meet space platform and antenna system needs in the 1980s is discussed. Preliminary designs for manned and automatically assembled space power system cables, connectors, and grounding and bonding materials and techniques are reviewed. Connector concepts, grounding design requirements, and bonding requirements are discussed. The problem of particulate debris contamination for large structure spacecraft is addressed.

  4. Emerging Power/Energy Technologies for Portable Electronics for SOCOM

    Science.gov (United States)

    2008-02-29

    missions at 20 W. An improved battery, the BA5390 UHC , will become available in 2008. It will provide about 40% more endurance at 20 W over 72 h, and...battery technology improves, such as in the case of the BA5390 UHC batteries, they will compete with proposed fuel cell and other fuel conversion...and new BA5390 UHC batteries (Windermere Study

  5. Scenarios to explore the futures of the emerging technology of organic and large area electronics

    OpenAIRE

    Parandian, Alireza; Rip, Arie

    2013-01-01

    Emerging technologies pose challenges for futures research because of their uncertainties combined with promises. Actors are anticipating and acting strategically. Sociotechnical scenarios building on endogenous futures support and enlighten actors. Such scenarios contribute to “strategic intelligence” about the technologies and their embedding in society. Organic and large area electronics promise to substitute silicon-based technologies, but firms and potential users are reluctant to invest...

  6. Electron collisions with atoms, ions, molecules, and surfaces: Fundamental science empowering advances in technology

    Science.gov (United States)

    Bartschat, Klaus; Kushner, Mark J.

    2016-06-01

    Electron collisions with atoms, ions, molecules, and surfaces are critically important to the understanding and modeling of low-temperature plasmas (LTPs), and so in the development of technologies based on LTPs. Recent progress in obtaining experimental benchmark data and the development of highly sophisticated computational methods is highlighted. With the cesium-based diode-pumped alkali laser and remote plasma etching of Si3N4 as examples, we demonstrate how accurate and comprehensive datasets for electron collisions enable complex modeling of plasma-using technologies that empower our high-technology-based society.

  7. Printing versus coating - What will be the future production technology for printed electronics?

    Energy Technology Data Exchange (ETDEWEB)

    Glawe, Andrea; Eggerath, Daniel; Schäfer, Frank [KROENERT GmbH and Co KG, Schuetzenstrasse 105, 22761 Hamburg (Germany)

    2015-02-17

    The market of Large Area Organic Printed Electronics is developing rapidly to increase efficiency and quality as well as to lower costs further. Applications for OPV, OLED, RFID and compact Printed Electronic systems are increasing. In order to make the final products more affordable, but at the same time highly accurate, Roll to Roll (R2R) production on flexible transparent polymer substrates is the way forward. There are numerous printing and coating technologies suitable depending on the design, the product application and the chemical process technology. Mainly the product design (size, pattern, repeatability) defines the application technology.

  8. Printing versus coating - What will be the future production technology for printed electronics?

    Science.gov (United States)

    Glawe, Andrea; Eggerath, Daniel; Schäfer, Frank

    2015-02-01

    The market of Large Area Organic Printed Electronics is developing rapidly to increase efficiency and quality as well as to lower costs further. Applications for OPV, OLED, RFID and compact Printed Electronic systems are increasing. In order to make the final products more affordable, but at the same time highly accurate, Roll to Roll (R2R) production on flexible transparent polymer substrates is the way forward. There are numerous printing and coating technologies suitable depending on the design, the product application and the chemical process technology. Mainly the product design (size, pattern, repeatability) defines the application technology.

  9. Devices for separation of particle emissions from biofuel plants smaller than 10 MW - Today's technology and potential for development; Stoftreningsteknik foer biobraensleanlaeggningar mindre aen 10 MW - tekniklaege och utvecklingspotential

    Energy Technology Data Exchange (ETDEWEB)

    Roennbaeck, Marie; Gustavsson, Lennart; Martinsson, Lars; Tullin, Claes; Johansson, Linda

    2002-09-01

    The objective of this report is to compile a survey of available technologies for separation of particles and to present research and development in the area of particle separation for biofuel plants smaller than 10 MW. Technical and economical opportunities to transfer the technologies used today in larger plants to smaller ones are discussed. As the health effects of aerosols are under investigation, the issue of separation of particle less than 1 {mu}m is especially scrutinised. Current research concerning the particle size distribution at different load is presented. The project has been realised partly as a literature survey, partly through contacts with scientists in the area and manufacturers of devices for flue gas cleaning and particle separation. The target group is owners of plants, manufacturers of devices and authorities with responsibility for air quality and energy planning. Fabric filters is an established technology that can perform low particle emissions (less than a few mg/m{sup 3}) at a low cost also at smaller plants. Also electrostatic precipitators can perform the same low emissions, but the cost for installation at smaller plants has to be reduced. Both these technologies can, properly designed, separate submicron particles. Cyclones can today as its best perform a little less than 100 mg/m{sup 3} at 13 % CO{sub 2}. Cyclones are used together with other technologies to achieve high separation at a low cost. Cyclones are attractive because of their simplicity and low price, but because they use inertia forces as separation mechanism, they can never separate submicron particles. Conventional scrubbers and flue gas condensers are capable of separation of submicron particles but the efficiency is lower compared with fabric filters and electrostatic precipitators. The emission level after a scrubber/flue gas condenser is about 70 - 80 mg/m{sup 3} at 13 % CO{sub 2}. New technologies for separation of particles oriented towards smaller plants and

  10. Diagnosis of electronic systems in SMT technological line

    Science.gov (United States)

    Butor, Marcin; Dziurdzia, Barbara

    2016-12-01

    The paper presents test and inspection strategies used in the company Fideltronik Poland, Sucha Beskidzka during the process of assembly of advanced electronic systems. As the example, the manufacturing process of modules for controlling and configuration of charts for video transmission has been analyzed. Various diagnostic methods such as Solder Paste Inspection (SPI), Automated Optical Inspection (AOI), Automated X-ray Inspection AXI and Functional Circuit Test FCT have been used to detect failures at different manufacturing stages of the modules and various repair actions have been proposed .

  11. Solder technology in the manufacturing of electronic products

    Energy Technology Data Exchange (ETDEWEB)

    Vianco, P.T.

    1993-08-01

    The electronics industry has relied heavily upon the use of soldering for both package construction and circuit assembly. The solder attachment of devices onto printed circuit boards and ceramic microcircuits has supported the high volume manufacturing processes responsible for low cost, high quality consumer products and military hardware. Defects incurred during the manufacturing process are minimized by the proper selection of solder alloys, substrate materials and process parameters. Prototyping efforts are then used to evaluate the manufacturability of the chosen material systems. Once manufacturing feasibility has been established, service reliability of the final product is evaluated through accelerated testing procedures.

  12. Technology and equipment for processing diamond materials of modern electronics

    Directory of Open Access Journals (Sweden)

    Mityagin A. Yu.

    2009-02-01

    Full Text Available The methods of selection and sorting of diamonds according to their physical properties by modern physical methods of the analysis are developed, as well as the technologies of precision laser cutting of diamonds, their processing on a basis of thermochemical reactions in gas environment. The experimental installation for polishing and grinding of diamond plates, installation for slicing, installation for plasma-chemical processing are created. The techniques of surface roughness measurement of the processed plates and control of roughness parameters are developed. Some experimental results are given.

  13. Hygiene yesterday, today, tomorrow.

    Science.gov (United States)

    Möse, Josef R

    2007-09-13

    I began my career in 1945 by tracing the footsteps of the legendary Max von Pettenkofer and Robert Koch. At that time their influence was still discernible, and continues to be.The first major innovation was the introduction of antibiotics, which some people believed would now dispense with the need for disinfection and sterilization. The next major development was the introduction of hospital hygiene as a discipline in its own right, aimed at highlighting the growing risk of nosocomial infections, albeit also against the background of the, admittedly, brilliant but unceasingly innovative armamentarium of medical paraphernalia and fittings. As regards the pathogens, viruses were seen to play an increasingly more prominent role as nosocomial pathogens, giving rise to completely novel challenges and problems in the field of disinfection and sterilization. In 1956 at Prof. Pette's institute in Hamburg it generally took weeks to produce the results to diagnose poliomyelitis. Their value was immensely important for science - but their value to the doctor and patients was questionable. The introduction of inexpensive sterile disposable syringes and other disposable equipment represented, in my opinion, the next milestone. In the meantime, there was a dramatic increase in the overall constellation of problems caused by the continuing upsurge in antibiotic bacterial resistance. And with growing awareness of environmental issues, the late 60s set in motion a new avalanche where one had to strive not only to keep abreast of matters, but also to ensure that science continued to prevail as the highest instance. Today we are facing completely different, but in principle still similar problems in consolidating the status of disinfection and sterilization, e.g. when it comes to the ultra delicate devices that in some cases are heavily contaminated after routine clinical use. Hence we elderly infection control experts still have a task to accomplish: to issue warnings again and

  14. Applications of Organic and Printed Electronics A Technology-Enabled Revolution

    CERN Document Server

    2013-01-01

    Organic and printed electronics can enable a revolution in the applications of electronics and this book offers readers an overview of the state-of-the-art in this rapidly evolving domain.  The potentially low cost, compatibility with flexible substrates and the wealth of devices that characterize organic and printed electronics will make possible applications that go far beyond the well-known displays made with large-area silicon electronics. Since organic electronics are still in their early stage, undergoing transition from lab-scale and prototype activities to production, this book serves as a valuable snapshot of the current landscape of the different devices enabled by this technology, reviewing all applications that are developing and those can be foreseen.   Provides a complete roadmap for organic and printed electronics research and development for the next several years; Includes an overview of the printing processes for organic electronics, along with state of the art applications, such as solar ...

  15. Reliability of lead-free solders in electronic packaging technology

    Science.gov (United States)

    Choi, Woojin

    The electromigration of flip chip solder bump (eutetic SnPb) has been studied at temperatures of 100, 125 and 150°C and current densities of 1.9 to 2.75 x 104 A/cm2. The under-bump-metallization on the chip side is thin film Al/Ni(V)/Cu and on the board side is thick Cu. By simulation, we found that current crowding occurs at the corner on the chip side where the electrons enter the solder ball. We are able to match this simulation to the real electromigration damage in the sample. The experimental result showed that voids initiated from the position of current crowding and propagated across the interface between UBM and the solder ball. The Cu-Sn intermetallic compounds formed during the reflow is known to adhere well to the thin film UBM, but they detached from the UBM after current stressing. Therefore, the UBM itself becomes part of the reliability problem of the flip chip solder joint under electromigration. Currently there is a renewed interest in Sn whisker growth owing to the introduction of Pb-free solder in electronic manufacturing. The leadframe is electroplated or finished with a layer of Pb-free solder. The solder is typically pure Sn or eutectic SnCu (0.7 atomic % Cu). It is a serious reliability concern in the use of the eutectic SnCu solder as leadframe surface finish due to the growth of long whiskers on it. The origin of the driving force of compressive stress can be mechanical, thermal, and chemical. Among them, the chemical force is the most important contribution to the whisker growth and its origin is due to the reaction between Sn and Cu to form intermetallic compound (IMC) at room temperature. For whisker or hillock growth, the surface cannot be free of oxide and it must be covered with oxide and the oxide must be a protective one so that it removes effectively all the vacancy sources and sinks on the surface. Hence, only those metals, which grow protective oxides such as Al and Sn, are known to have hillock growth or whisker growth. We

  16. X-ray today

    Energy Technology Data Exchange (ETDEWEB)

    Neitzel, U. [Philips Medical Systems, Hamburg (Germany)

    2001-09-01

    The interest attracted by the new imaging modalities tends to overshadow the continuing importance of projection radiography and fluoroscopy. Nevertheless, projection techniques still represent by far the greatest proportion of diagnostic imaging examinations, and play an essential role in the growing number of advanced interventional procedures. This article describes some of the latest developments in X-ray imaging technology, using two products from the Philips range as examples: the Integris Allura cardiovascular system with 3D image reconstruction, and the BV Pulsera: a high-end, multi-functional mobile C-arm system with cardiac capabilities. (orig.)

  17. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - PORTABLE GAS CHROMATOGRAPH ELECTRONIC SENSOR TECHNOLOGY MODEL 4100

    Science.gov (United States)

    The U.S. Environmental Protection Agency, through the Environmental Technology Verification Program, is working to accelerate the acceptance and use of innovative technologies that improve the way the United States manages its environmental problems. As part of this program, the...

  18. Electron impact ionization in plasma technologies; studies on atomic boron and BN molecule

    Science.gov (United States)

    Joshi, Foram M.; Joshipura, K. N.; Chaudhari, Asha S.

    2016-05-01

    Electron impact ionization plays important role in plasma technologies. Relevant cross sections on atomic boron are required to understand the erosion processes in fusion experiments. Boronization of plasma exposed surfaces of tokomaks has proved to be an effective way to produce very pure fusion plasmas. This paper reports comprehensive theoretical investigations on electron scattering with atomic Boron and Boron Nitride in solid phases. Presently we determine total ionization cross-section Qion and the summed-electronic excitation cross section ΣQexc in a standard quantum mechanical formalism called SCOP and CSP-ic methods. Our calculated cross sections are examined as functions of incident electron energy along with available comparisons.

  19. Recent progress on thin-film encapsulation technologies for organic electronic devices

    Science.gov (United States)

    Yu, Duan; Yang, Yong-Qiang; Chen, Zheng; Tao, Ye; Liu, Yun-Fei

    2016-03-01

    Among the advanced electronic devices, flexible organic electronic devices with rapid development are the most promising technologies to customers and industries. Organic thin films accommodate low-cost fabrication and can exploit diverse molecules in inexpensive plastic light emitting diodes, plastic solar cells, and even plastic lasers. These properties may ultimately enable organic materials for practical applications in industry. However, the stability of organic electronic devices still remains a big challenge, because of the difficulty in fabricating commercial products with flexibility. These organic materials can be protected using substrates and barriers such as glass and metal; however, this results in a rigid device and does not satisfy the applications demanding flexible devices. Plastic substrates and transparent flexible encapsulation barriers are other possible alternatives; however, these offer little protection to oxygen and water, thus rapidly degrading the devices. Thin-film encapsulation (TFE) technology is most effective in preventing water vapor and oxygen permeation into the flexible devices. Because of these (and other) reasons, there has been an intense interest in developing transparent barrier materials with much lower permeabilities, and their market is expected to reach over 550 million by 2025. In this study, the degradation mechanism of organic electronic devices is reviewed. To increase the stability of devices in air, several TFE technologies were applied to provide efficient barrier performance. In this review, the degradation mechanism of organic electronic devices, permeation rate measurement, traditional encapsulation technologies, and TFE technologies are presented.

  20. Packaging Technologies for 500C SiC Electronics and Sensors

    Science.gov (United States)

    Chen, Liang-Yu

    2013-01-01

    Various SiC electronics and sensors are currently under development for applications in 500C high temperature environments such as hot sections of aerospace engines and the surface of Venus. In order to conduct long-term test and eventually commercialize these SiC devices, compatible packaging technologies for the SiC electronics and sensors are required. This presentation reviews packaging technologies developed for 500C SiC electronics and sensors to address both component and subsystem level packaging needs for high temperature environments. The packaging system for high temperature SiC electronics includes ceramic chip-level packages, ceramic printed circuit boards (PCBs), and edge-connectors. High temperature durable die-attach and precious metal wire-bonding are used in the chip-level packaging process. A high temperature sensor package is specifically designed to address high temperature micro-fabricated capacitive pressure sensors for high differential pressure environments. This presentation describes development of these electronics and sensor packaging technologies, including some testing results of SiC electronics and capacitive pressure sensors using these packaging technologies.

  1. Potential of 3D printing technologies for fabrication of electron bolus and proton compensators.

    Science.gov (United States)

    Zou, Wei; Fisher, Ted; Zhang, Miao; Kim, Leonard; Chen, Ting; Narra, Venkat; Swann, Beth; Singh, Rachana; Siderit, Richard; Yin, Lingshu; Teo, Boon-Keng Kevin; McKenna, Michael; McDonough, James; Ning, Yue J

    2015-05-08

    In electron and proton radiotherapy, applications of patient-specific electron bolus or proton compensators during radiation treatments are often necessary to accommodate patient body surface irregularities, tissue inhomogeneity, and variations in PTV depths to achieve desired dose distributions. Emerging 3D printing technologies provide alternative fabrication methods for these bolus and compensators. This study investigated the potential of utilizing 3D printing technologies for the fabrication of the electron bolus and proton compensators. Two printing technologies, fused deposition modeling (FDM) and selective laser sintering (SLS), and two printing materials, PLA and polyamide, were investigated. Samples were printed and characterized with CT scan and under electron and proton beams. In addition, a software package was developed to convert electron bolus and proton compensator designs to printable Standard Tessellation Language file format. A phantom scalp electron bolus was printed with FDM technology with PLA material. The HU of the printed electron bolus was 106.5 ± 15.2. A prostate patient proton compensator was printed with SLS technology and polyamide material with -70.1 ± 8.1 HU. The profiles of the electron bolus and proton compensator were compared with the original designs. The average over all the CT slices of the largest Euclidean distance between the design and the fabricated bolus on each CT slice was found to be 0.84 ± 0.45 mm and for the compensator to be 0.40 ± 0.42 mm. It is recommended that the properties of specific 3D printed objects are understood before being applied to radiotherapy treatments.

  2. Teaching ethics and technology with Agora, an electronic tool.

    Science.gov (United States)

    van der Burg, Simone; van de Poel, Ibo

    2005-04-01

    Courses on ethics and technology have become compulsory for many students at the three Dutch technical universities during the past few years. During this time, teachers have faced a number of didactic problems, which are partly due to a growing number of students. In order to deal with these challenges, teachers in ethics at the three technical universities in the Netherlands--in Delft, Eindhoven and Twente--have developed a web-based computer program called Agora (see www.ethicsandtechnology.com). This program enables students to exercise their ethical understanding and skills extensively. The program makes it possible for students to participate actively in moral reflection and reasoning, and to develop the moral competencies that are needed in their later professional practice. The developers of the program have tried to avoid two traps. Firstly, they rejected, from the outset, a cookbook style of dealing with ethical problems that applied ethics is often taken to be and, secondly, they wanted to design a flexible program that respects the student's as well as the teacher's creativity, and that tries to engage students in moral reflection. Agora meets these requirements. The program offers possibilities that extend beyond the requirements that are usually accepted for case-exercises in applied ethics, and that have been realised in several other computer models for teaching ethics. In this article, we describe the main considerations in the development of Agora and the features of the resulting program.

  3. High Performance Computing Today

    Energy Technology Data Exchange (ETDEWEB)

    Dongarra, Jack; Meuer,Hans; Simon,Horst D.; Strohmaier,Erich

    2000-04-01

    In last 50 years, the field of scientific computing has seen a rapid change of vendors, architectures, technologies and the usage of systems. Despite all these changes the evolution of performance on a large scale however seems to be a very steady and continuous process. Moore's Law is often cited in this context. If the authors plot the peak performance of various computers of the last 5 decades in Figure 1 that could have been called the supercomputers of their time they indeed see how well this law holds for almost the complete lifespan of modern computing. On average they see an increase in performance of two magnitudes of order every decade.

  4. What Is the University Today?

    Science.gov (United States)

    Heaney, Conor

    2015-01-01

    What is the University today? In this paper, a Foucault and Deleuzo-Guattarian inspired approach is taken. I argue that the University is, today, a site of "neoliberal governmentality," which governs students and academics as sites of human capital. That is, students and academics are governed to self-govern themselves as sites of human…

  5. Transforming health care the financial impact of technology, electronic tools and data mining

    CERN Document Server

    Fasano, Phil

    2013-01-01

    The future of healthcare technologies, and what they mean for investors and entrepreneurs The healthcare technology revolution is just around the corner. And when it arrives, it will change and enrich our lives in ways we can only begin to imagine. Doctors will perform blood pressure readings via video chat and nutritionists will analyze diet based on photos taken with cellphone cameras. Transforming Health Care combines healthcare, technology, and finance in an innovative new way that explains the future of healthcare and its effects on patient care, exploring the emergence of electronic tools that will transform the medical industry. Explaining how technology, not politics, will lead the future of the healthcare revolution, author and healthcare technology expert Phil Fasano presents real-life examples that show how the next generation of medical breakthroughs will come from the instant exchange of information across the world Explores how new technologies will radically change the future of healthcare by m...

  6. Innovative, wearable snap connector technology for improved device networking in electronic garments

    Science.gov (United States)

    Kostrzewski, Andrew A.; Lee, Kang S.; Gans, Eric; Winterhalter, Carole A.; Jannson, Tomasz P.

    2007-04-01

    This paper discusses Physical Optics Corporation's (POC) wearable snap connector technology that provides for the transfer of data and power throughout an electronic garment (e-garment). These connectors resemble a standard garment button and can be mated blindly with only one hand. Fully compatible with military clothing, their application allows for the networking of multiple electronic devices and an intuitive method for adding/removing existing components from the system. The attached flexible cabling also permits the rugged snap connectors to be fed throughout the standard webbing found in military garments permitting placement in any location within the uniform. Variations of the snap electronics/geometry allow for integration with USB 2.0 devices, RF antennas, and are capable of transferring high bandwidth data streams such as the 221 Mbps required for VGA video. With the trend towards providing military officers with numerous electronic devices (i.e., heads up displays (HMD), GPS receiver, PDA, etc), POC's snap connector technology will greatly improve cable management resulting in a less cumbersome uniform. In addition, with electronic garments gaining widespread adoption in the commercial marketplace, POC's technology is finding applications in such areas as sporting good manufacturers and video game technology.

  7. The development of an electronic business based on the MySQL technology

    Directory of Open Access Journals (Sweden)

    Andreea IONESCU

    2011-09-01

    Full Text Available This article aims to demonstrate the importance of using relational database management system in working with web applications. We chose MySQL technology like representative relational database management system because has: portability, scalability, speed, is easy to use, is open source, is widely used by web developers and provides good security. We watched the analysis of an electronic business. We also presented the technologies that we have used: PHP, MySQL, HTML, CSS.

  8. Recent Advancements in Liquid Metal Flexible Printed Electronics: Properties, Technologies, and Applications

    Directory of Open Access Journals (Sweden)

    Xuelin Wang

    2016-11-01

    Full Text Available This article presents an overview on typical properties, technologies, and applications of liquid metal based flexible printed electronics. The core manufacturing material—room-temperature liquid metal, currently mainly represented by gallium and its alloys with the properties of excellent resistivity, enormous bendability, low adhesion, and large surface tension, was focused on in particular. In addition, a series of recently developed printing technologies spanning from personal electronic circuit printing (direct painting or writing, mechanical system printing, mask layer based printing, high-resolution nanoimprinting, etc. to 3D room temperature liquid metal printing is comprehensively reviewed. Applications of these planar or three-dimensional printing technologies and the related liquid metal alloy inks in making flexible electronics, such as electronical components, health care sensors, and other functional devices were discussed. The significantly different adhesions of liquid metal inks on various substrates under different oxidation degrees, weakness of circuits, difficulty of fabricating high-accuracy devices, and low rate of good product—all of which are challenges faced by current liquid metal flexible printed electronics—are discussed. Prospects for liquid metal flexible printed electronics to develop ending user electronics and more extensive applications in the future are given.

  9. Developing a comprehensive electronic health record to enhance nursing care coordination, use of technology, and research.

    Science.gov (United States)

    Rantz, Marilyn J; Skubic, Marjorie; Alexander, Greg; Popescu, Mihail; Aud, Myra A; Wakefield, Bonnie J; Koopman, Richelle J; Miller, Steven J

    2010-01-01

    As in acute care, use of health information technology in long-term care holds promise for increased efficiency, better accuracy, reduced costs, and improved outcomes. A comprehensive electronic health record (EHR), which encompasses all health care measures that clinicians want to use-both standard health care assessments and those acquired through emerging technology-is the key to improved, efficient clinical decision making. New technologies using sensors to passively monitor older adults at home are being developed and are commercially available. However, integrating the clinical information systems with passive monitoring data so that clinical decision making is enhanced and patient records are complete is challenging. Researchers at the University of Missouri (MU) are developing a comprehensive EHR to: (a) enhance nursing care coordination at TigerPlace, independent senior housing that helps residents age in place; (b) integrate clinical data and data from new technology; and (c) advance technology and clinical research. Copyright 2010, SLACK Incorporated.

  10. "UK today" Tallinnas / Tuuli Oder

    Index Scriptorium Estoniae

    Oder, Tuuli, 1958-

    2001-01-01

    Vabariikliku inglise keele olümpiaadi raames toimus Tallinnas viktoriini "UK today" lõppvoor. Osalesid 22 kooli kaheliikmelised võistkonnad. Viktoriini tulemused koolide lõikes ja küsimused õigete vastustega

  11. Use of electronic nose technology to identify cattle experimentally infected with Mycobacterium bovis: A pilot study

    Science.gov (United States)

    Electronic nose technology has historically been utilized for the detection of volatile organic compounds (VOCs) and semi-volatile compounds in air, soil, water, and for quality control in food, beverage and cosmetic industries. Breath analysis has been used experimentally in humans and animals to ...

  12. 12 CFR 352.5 - Accessibility to electronic and information technology.

    Science.gov (United States)

    2010-01-01

    ... information and data by members of the public who are not individuals with disabilities. (b) When development... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Accessibility to electronic and information technology. 352.5 Section 352.5 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND...

  13. Vertical and Horizontal Integration of Laboratory Curricula and Course Projects across the Electronic Engineering Technology Program

    Science.gov (United States)

    Zhan, Wei; Goulart, Ana; Morgan, Joseph A.; Porter, Jay R.

    2011-01-01

    This paper discusses the details of the curricular development effort with a focus on the vertical and horizontal integration of laboratory curricula and course projects within the Electronic Engineering Technology (EET) program at Texas A&M University. Both software and hardware aspects are addressed. A common set of software tools are…

  14. Electronic Communications Technologies and the Transition to College: Links to Parent-Child Attachment and Adjustment

    Science.gov (United States)

    Sarigiani, Pamela A.; Trumbell, Jill M.; Camarena, Phame M.

    2013-01-01

    Electronic communications technologies (ECTs) help college students and parents remain in contact. Because recent reports have emphasized a link between ECTs, helicopter parenting, and autonomy issues, this study focused on the significance of contact patterns for attachment and student adjustment. First-semester college students (199 female, 81…

  15. Integrating the Schoolhouse and the Marketplace: A Preliminary Assessment of the Emerging Role of Electronic Technology.

    Science.gov (United States)

    Molnar, Alex

    This paper focuses on how, by reinforcing and exploiting the emphasis on electronic technologies in school reform, marketers are integrating school children into the advertising and marketing system. The ZapMe! program is a for-profit venture that proposes to derive its profits from activities that link the academic activities of schools and the…

  16. Frictional and bone ingrowth properties of engineered surface topographies produced by electron beam technology

    NARCIS (Netherlands)

    Biemond, J.E.; Aquarius, R.J.M.; Verdonschot, N.J.J.; Buma, P.

    2011-01-01

    BACKGROUND: Electron beam melting (E-beam) is a new technology to produce 3-dimensional surface topographies for cementless orthopedic implants. METHODS: The friction coefficients of two newly developed E-beam produced surface topographies were in vitro compared with sandblasted E-beam and titanium

  17. Frictional and bone ingrowth properties of engineered surface topographies produced by electron beam technology

    NARCIS (Netherlands)

    Biemond, J. Elizabeth; Aquarius, Rene; Verdonschot, Nicolaas Jacobus Joseph; Buma, Pieter

    2011-01-01

    Background Electron beam melting (E-beam) is a new technology to produce 3-dimensional surface topographies for cementless orthopedic implants. Methods The friction coefficients of two newly developed E-beam produced surface topographies were in vitro compared with sandblasted E-beam and titanium

  18. Educational Implications of In-Home Electronic Technology. Research Memorandum--33.

    Science.gov (United States)

    Walling, Victor C., Jr.; And Others

    This study identifies and assesses the potential impact of new electronic technologies on education in private homes, and looks beyond immediate incremental changes to broader, more subtle, complex, or threatening changes that may require attention from federal policymakers. Some educational implications are discussed: (1) equality of access to…

  19. Theoretical and practical considerations for teaching diagnostic electronic-nose technologies to clinical laboratory technicians

    Science.gov (United States)

    Alphus D. Wilson

    2012-01-01

    The rapid development of new electronic technologies and instruments, utilized to perform many current clinical operations in the biomedical field, is changing the way medical health care is delivered to patients. The majority of test results from laboratory analyses, performed with these analytical instruments often prior to clinical examinations, are frequently used...

  20. What Did You Do Today?

    Institute of Scientific and Technical Information of China (English)

    王淼鑫; 陈敏敏; 廖萌; 肖洪平

    2006-01-01

    What do you do every day? Is it good.bad.interesting or boring? Would you like to share with us? What did you do today? Today I read a book about China.It was very interesting.After that,I did my homework and studied for a math test.I don’t like math,so it was difficult for me.But I have to study hard anyway.

  1. American Society for Therapeutic Radiology and Oncology (ASTRO) Emerging Technology Committee report on electronic brachytherapy.

    Science.gov (United States)

    Park, Catherine C; Yom, Sue S; Podgorsak, Matthew B; Harris, Eleanor; Price, Robert A; Bevan, Alison; Pouliot, Jean; Konski, Andre A; Wallner, Paul E

    2010-03-15

    The development of novel technologies for the safe and effective delivery of radiation is critical to advancing the field of radiation oncology. The Emerging Technology Committee of the American Society for Therapeutic Radiology and Oncology appointed a Task Group within its Evaluation Subcommittee to evaluate new electronic brachytherapy methods that are being developed for, or are already in, clinical use. The Task Group evaluated two devices, the Axxent Electronic Brachytherapy System by Xoft, Inc. (Fremont, CA), and the Intrabeam Photon Radiosurgery Device by Carl Zeiss Surgical (Oberkochen, Germany). These devices are designed to deliver electronically generated radiation, and because of their relatively low energy output, they do not fall under existing regulatory scrutiny of radioactive sources that are used for conventional radioisotope brachytherapy. This report provides a descriptive overview of the technologies, current and future projected applications, comparison of competing technologies, potential impact, and potential safety issues. The full Emerging Technology Committee report is available on the American Society for Therapeutic Radiology and Oncology Web site.

  2. Low cost, biocompatible elastic and conformable electronic technologies using MID in stretchable polymer.

    Science.gov (United States)

    Axisa, F; Brosteaux, D; De Leersnyder, E; Bossuyt, F; Gonzalez, M; De Smet, N; Schacht, E; Rymarczyk-Machal, M; Vanfleteren, J

    2007-01-01

    For user comfort reasons, electronic circuits for implantation in the human body or for use as smart clothes should ideally be soft, stretchable and elastic. In this contribution the results of an MID (Molded Interconnect Device) technology will be presented, showing the feasibility of functional stretchable electronic circuits. In the developed technology rigid or flexible standard components are interconnected by meander shaped metallic wires and embedded by molding in a stretchable substrate polymer. Several technologies have been developed to this purpose, which combine low cost and good reliability under mechanical strain. In this way reliable stretchability of the circuits above 100% has been demonstrated. Enhanced reliability has been reached using an additional conductive polymer layer.

  3. IMPROVING THE TECHNOLOGY OF BELORUSSIAN RAILWAY IN CONDITIONS OF ELECTRONIC DOCUMENTS USAGE

    Directory of Open Access Journals (Sweden)

    M. M. Kolos

    2016-08-01

    Full Text Available Purpose. The scientific paper highlights improving the technology of railway transport in the Republic of Belarus in conditions of electronic legally significant documents. Methodology. The study covered the collection of statistical data on the duration of separate technological operations performance, the evaluation of static data and the descriptive analysis of their characteristics. When assessing the effectiveness of the proposed measures we used methods of expert estimations, methods of evaluating the effectiveness of IT investments. Findings. Technology, hardware, software, organizational and other aspects of electronic legally significant documents used in freight and commercial work are determined. The work defines the most important directions of technology improvements at Belarusian Railway entities and their relations with shippers and consignees through the use of electronic legally significant documents. These directions are as follows: simplification of station commercial costs accounting, automation of technological operations, improving the interaction between the railway tracks and adjunction stations, simplification of transport planning and demand performance record, implementation of common information space for all participants of transportation process. The predictive estimate of efficiency for implementation of electronic legally significant documents in freight and commercial work of the Belarusian railway is calculated. Originality. This article presents a dual model of digital signature as a tool for the automatic fixation of technological operations or for specifying the time for its implementation, which allows converting a number of technological processes to a new level, helping to create a common information space of freight traffic. Practical value. The obtained results are used to form the list of the actions directed on perfection of railway transport technology in conditions of electronic legally significant

  4. Partnerships for technology introduction -- Putting the technologies of tomorrow into the marketplace of today. Report to Congress on Sections 127 and 128 of the Energy Policy Act of 1992

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    This report to Congress was prepared on behalf of the Secretary of the US Department of Energy (DOE) in response to Sections 127 and 128 of the Energy Policy Act of 1992 (EPAct), Pub. L. 102-486. In preparing the report to the Congress, DOE has assessed the national and regional energy savings potential of products already on the market and those that will be available to consumers by the late 1990s. The Department has also examined the present cost-effectiveness of these emerging appliances as mature technologies. To help in its assessment, DOE organized eight workshops at which representatives from manufacturing and building industries, utilities, retailers and wholesalers, public interest groups and Federal and state government agencies could express their views. The information derived from these workshops was key to the formulation of the report`s general and specific recommendations. DOE has concluded that the Federal Government can effectively stimulate the market for emerging technologies by forming partnerships with the appliance industry and other interested parties promoting the use of highly efficient appliances. Based on the interaction with industry at the eight workshops and through direct contact, DOE has concluded that Federal action and technical assistance is not only desired by industry, but crucial to the expansion of these markets. Section 128 of EPAct requires an assessment of the energy savings and environmental benefits of replacing older, less efficient appliances with more efficient products than currently required by Federal law. Since early replacement of appliances is but one possible market-stimulating action, DOE has elected to include its discussion as part of the overall report to the Congress.

  5. CIS5/405: Web Technology in Healthcare - Delivering Electronic Records Using the Clinical Intranet

    Science.gov (United States)

    Berger, M

    1999-01-01

    Introduction The development of electronic records - EPR & EHR (Electronic Patient Records & Electronic Health Records) - requires the use of innovative technology. With the emergence of web enabled applications, that technology is now available. In this paper, we consider the opportunities afforded by web technology and articulate their vision for making electronic records an affordable reality through the use of the ViewMax Integration Server. It is designed to be used as a discussion document for Health Authorities, Primary Care Groups and Trusts when considering their shared strategies for building electronic records. Methods Hospitals that have developed, or are developing EPR, have generally adopted one of the following approaches: Big Bang solutions or Interfaced solutions. Whilst both of these models have their merits, both also have significant limitations and disadvantages. With the advent of web technology, a "third way" has emerged. Through the development of e-commerce in the commercial sector, sophisticated Host-to-Web integration tools are now available, providing facilities which would have seemed impossible only a few years ago: Systems can now be integrated and accessed through an industry standard web browser. Legacy systems can be provided with a modern, intuitive interface, designed to support the needs of particular groups of users, and data from multiple, disparate systems, applications and screens can be combined into a single web page. Data from one system can be easily transferred to other applications. New applications developed using modern databases can be seamlessly integrated with existing host systems. Most importantly, this new approach enables full interactive access to legacy technologies using a browser, without requiring any modification to host systems. Utilising the latest Web integration tools it is now possible to incrementally develop cost-effective electronic records. Results The hospital is an average acute district

  6. Electron beam technology for multipollutant emissions control from heavy fuel oil-fired boiler.

    Science.gov (United States)

    Chmielewski, Andrzej G; Ostapczuk, Anna; Licki, Janusz

    2010-08-01

    The electron beam treatment technology for purification of exhaust gases from the burning of heavy fuel oil (HFO) mazout with sulfur content approximately 3 wt % was tested at the Institute of Nuclear Chemistry and Technology laboratory plant. The parametric study was conducted to determine the sulfur dioxide (SO2), oxides of nitrogen (NO(x)), and polycyclic aromatic hydrocarbon (PAH) removal efficiency as a function of temperature and humidity of irradiated gases, absorbed irradiation dose, and ammonia stoichiometry process parameters. In the test performed under optimal conditions with an irradiation dose of 12.4 kGy, simultaneous removal efficiencies of approximately 98% for SO2, and 80% for NO(x) were recorded. The simultaneous decrease of PAH and one-ringed aromatic hydrocarbon (benzene, toluene, and xylenes [BTX]) concentrations was observed in the irradiated flue gas. Overall removal efficiencies of approximately 42% for PAHs and 86% for BTXs were achieved with an irradiation dose 5.3 kGy. The decomposition ratio of these compounds increased with an increase of absorbed dose. The decrease of PAH and BTX concentrations was followed by the increase of oxygen-containing aromatic hydrocarbon concentrations. The PAH and BTX decomposition process was initialized through the reaction with hydroxyl radicals that formed in the electron beam irradiated flue gas. Their decomposition process is based on similar principles as the primary reaction concerning SO2 and NO(x) removal; that is, free radicals attack organic compound chains or rings, causing volatile organic compound decomposition. Thus, the electron beam flue gas treatment (EBFGT) technology ensures simultaneous removal of acid (SO2 and NO(x)) and organic (PAH and BTX) pollutants from flue gas emitted from burning of HFO. This technology is a multipollutant emission control technology that can be applied for treatment of flue gas emitted from coal-, lignite-, and HFO-fired boilers. Other thermal processes such

  7. Design of a new electron cyclotron resonance ion source at Oshima National College of Maritime Technology

    Energy Technology Data Exchange (ETDEWEB)

    Asaji, T., E-mail: asaji@oshima-k.ac.jp; Hirabara, N.; Izumihara, T.; Nakamizu, T.; Ohba, T.; Nakamura, T.; Furuse, M. [Oshima National College of Maritime Technology (OCMT), 1091-1 Komatsu, Suo-oshima, Yamaguchi 742-2193 (Japan); Hitobo, T. [Tateyama Machine Co., Ltd., 30 Shimonoban, Toyama 930-1305 (Japan); Kato, Y. [Graduate School of Engineering, Osaka University, 2-1 Yamada-oka, Suita, Osaka 565-0871 (Japan)

    2014-02-15

    A new electron cyclotron resonance ion/plasma source has been designed and will be built at Oshima National College of Maritime Technology by early 2014. We have developed an ion source that allows the control of the plasma parameters over a wide range of electron temperatures for material research. A minimum-B magnetic field composed of axial mirror fields and radial cusp fields was designed using mainly Nd-Fe-B permanent magnets. The axial magnetic field can be varied by three solenoid coils. The apparatus has 2.45 GHz magnetron and 2.5–6.0 GHz solid-state microwave sources.

  8. Health information technology: medical record documentation issues in the electronic era.

    Science.gov (United States)

    Dacey, Bill; Bholat, Michelle Anne

    2012-12-01

    This article outlines the regulatory movement propelling physicians into the electronic health record environment and the subsequent emergence of quality issues in the medical record. There are benefits and downside risks for implementing electronic health records as part of the desire of a practice or institution to build patient-centered medical homes. The intersection of how a practice or institution collects and reports quality metrics using health information technology and subsequently submits claims for services rendered has created unforeseen challenges for which leadership must be aware and address proactively.

  9. Electronic data capture platform for clinical research based on mobile phones and near field communication technology.

    Science.gov (United States)

    Morak, Jürgen; Schwetz, Verena; Hayn, Dieter; Fruhwald, Friedrich; Schreier, Gunter

    2008-01-01

    Electronic data capture systems support data acquisition for clinical research and enable the evaluation of new investigational medical devices. In case of evaluating a device the most challenging part is the user interface i.e. the solution how to acquire the data within a clinical setting and to synchronize them with a web-based data centre. The aim of this paper is to describe the development of an electronic data capture system with a mobile data input solution based on mobile phones and Near Field Communication technology. This system was evaluated within a real clinical setting and demonstrated high usability, security and reliability.

  10. Rural gifted students who are deaf or hard of hearing: how electronic technology can help.

    Science.gov (United States)

    Belcastro, Frank P

    2004-01-01

    Electronic technology can be used to overcome many of the barriers and other factors that restrict delivery of services to rural schools; it can also expand the world of rural gifted students who are deaf or hard of hearing. Online college and high school Web sites that offer courses are listed, as well as a Web site for tutoring and one offering help for teachers of rural gifted students who are deaf or hard of hearing. Recommendations are made for ways that legislatures and rural school districts can make Internet resources and assistive technology more widely available in rural educational settings.

  11. Advanced Transmission Electron Microscopy Applications in Nano-Materials and Nano-Technology Developments

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Nano-technology development is nowadays a very hot topics in many research fields. Nano-materials are the foundations for developing this new technology. In order to fully understand the basic material science problems behind this topics, transmission electron microscopy (TEM) becomes the must and one of the most important technique to analyze the nano-size structure and composition using the most advanced high resolution TEM technique with nano-beam EDS and energy filter EELS to study the fine structures, crystallography, chemical composition, and optical properties of many different nano-materials in different industries applications.

  12. Advanced Transmission Electron Microscopy Applications in Nano-Materials and Nano-Technology Developments

    Institute of Scientific and Technical Information of China (English)

    KAI; J.J.

    2001-01-01

    Nano-technology development is nowadays a very hot topics in many research fields. Nano-materials are the foundations for developing this new technology. In order to fully understand the basic material science problems behind this topics, transmission electron microscopy (TEM) becomes the must and one of the most important technique to analyze the nano-size structure and composition using the most advanced high resolution TEM technique with nano-beam EDS and energy filter EELS to study the fine structures, crystallography, chemical composition, and optical properties of many different nano-materials in different industries applications.  ……

  13. Using Technology-Nested Instructional Strategies to Enhance Student Learning

    Science.gov (United States)

    Lumpkin, Angela; Achen, Rebecca M.; Dodd, Regan K.

    2015-01-01

    Students today expect the use of technology in their classes, rather than have to listen to less-than-engaging lectures. College students are connected electronically and incessant technology consumers. As a result, they may prefer the infusion of technologies to help them learn and enjoy the process of learning, rather than having to listen…

  14. Flexible MEMS: A novel technology to fabricate flexible sensors and electronics

    Science.gov (United States)

    Tu, Hongen

    This dissertation presents the design and fabrication techniques used to fabricate flexible MEMS (Micro Electro Mechanical Systems) devices. MEMS devices and CMOS(Complementary Metal-Oxide-Semiconductor) circuits are traditionally fabricated on rigid substrates with inorganic semiconductor materials such as Silicon. However, it is highly desirable that functional elements like sensors, actuators or micro fluidic components to be fabricated on flexible substrates for a wide variety of applications. Due to the fact that flexible substrate is temperature sensitive, typically only low temperature materials, such as polymers, metals, and organic semiconductor materials, can be directly fabricated on flexible substrates. A novel technology based on XeF2(xenon difluoride) isotropic silicon etching and parylene conformal coating, which is able to monolithically incorporate high temperature materials and fluidic channels, was developed at Wayne State University. The technology was first implemented in the development of out-of-plane parylene microneedle arrays that can be individually addressed by integrated flexible micro-channels. These devices enable the delivery of chemicals with controlled temporal and spatial patterns and allow us to study neurotransmitter-based retinal prosthesis. The technology was further explored by adopting the conventional SOI-CMOS processes. High performance and high density CMOS circuits can be first fabricated on SOI wafers, and then be integrated into flexible substrates. Flexible p-channel MOSFETs (Metal-Oxide-Semiconductor Field-Effect-Transistors) were successfully integrated and tested. Integration of pressure sensors and flow sensors based on single crystal silicon has also been demonstrated. A novel smart yarn technology that enables the invisible integration of sensors and electronics into fabrics has been developed. The most significant advantage of this technology is its post-MEMS and post-CMOS compatibility. Various high

  15. Next Generation Electronic Passport Scheme using Cryptographic Authentication Protocols and Multiple Biometrics Technology

    Directory of Open Access Journals (Sweden)

    V.K. Narendira Kumar

    2013-08-01

    Full Text Available Electronic passports (e-passports are to prevent the illegal entry of traveller into a specific country and limit the use of counterfeit documents by more accurate identification of an individual. The epassport, as it is sometimes called, represents a bold initiative in the deployment of two new technologies: cryptography security and biometrics (face, fingerprints, palm prints and iris. A passport contains the important personal information of holder such as photo, name, date of birth and place, nationality, date of issue, date of expiry, authority and so on. The goal of the adoption of the electronic passport is not only to expedite processing at border crossings, but also to increase security. The paper explores the privacy and security implications of this impending worldwide experiment in biometrics authentication technology.

  16. Development of manufacturing technologies of printed circuits at the Mining Electronics Plant

    Energy Technology Data Exchange (ETDEWEB)

    Banas, J.; Giglok, M.; Skalski, Z. (Zaklad Elektroniki Gorniczej, Tychy (Poland))

    1989-12-01

    Discusses development of printed circuit manufacturing by the Mining Electronics Plant in Tychy. The circuits are used in control equipment and computerized control systems for underground black coal mining in Poland. The following aspects of circuit manufacturing are evaluated: design of printed circuits, materials used for circuit manufacturing (copper), manufacturing technologies, licenses and know-how, quality requirements, quality assurance and quality control, reliability, safety.

  17. Today's Chicano Refutes the Stereotype

    Science.gov (United States)

    Maldonado, Bonnie M.; Cross, William C.

    1977-01-01

    Effects of skin color on male-female self-concepts were measured by the Tennessee Self-Concept Scale. No significant differences were found between the study and the norm groups. The self-image of today's Chicano tends to refute negative stereotyping. (Author)

  18. Euphoria, Dystopia and Practice Today

    Science.gov (United States)

    Standish, Paul

    2002-01-01

    Hubert Dreyfus' "On the Internet" provides a powerful commentary on the way that the Internet has come to influence people's lives today, and a trenchant attack on the more extreme claims that are made for its benefits for education. Dreyfus has succeeded in presenting an account that is clear, accessible and concise. The book is full of vivid…

  19. School Counseling in China Today

    Science.gov (United States)

    Thomason, Timothy C.; Qiong, Xiao

    2008-01-01

    This article provides a brief overview of the development of psychological thinking in China and social influences on the practice of school counseling today. Common problems of students are described, including anxiety due to pressure to perform well on exams, loneliness and social discomfort, and video game addiction. Counseling approaches used…

  20. "UK today" Tallinnas / Tuuli Oder

    Index Scriptorium Estoniae

    Oder, Tuuli

    2001-01-01

    Vabariikliku inglise keele olümpiaadi raames toimus 9. nov.̀2001 Tallinnas viktoriini "UK today" lõppvoor, mille korraldas üleriigiline inglise keele ainenõukogu. Osalesid 22 kooli kaheliikmelised võistkonnad. Viktoriini tulemused koolide lõikes ja küsimused õigete vastustega

  1. Diverse Applications of Electronic-Nose Technologies in Agriculture and Forestry

    Directory of Open Access Journals (Sweden)

    Alphus D. Wilson

    2013-02-01

    Full Text Available Electronic-nose (e-nose instruments, derived from numerous types of aroma-sensor technologies, have been developed for a diversity of applications in the broad fields of agriculture and forestry. Recent advances in e-nose technologies within the plant sciences, including improvements in gas-sensor designs, innovations in data analysis and pattern-recognition algorithms, and progress in material science and systems integration methods, have led to significant benefits to both industries. Electronic noses have been used in a variety of commercial agricultural-related industries, including the agricultural sectors of agronomy, biochemical processing, botany, cell culture, plant cultivar selections, environmental monitoring, horticulture, pesticide detection, plant physiology and pathology. Applications in forestry include uses in chemotaxonomy, log tracking, wood and paper processing, forest management, forest health protection, and waste management. These aroma-detection applications have improved plant-based product attributes, quality, uniformity, and consistency in ways that have increased the efficiency and effectiveness of production and manufacturing processes. This paper provides a comprehensive review and summary of a broad range of electronic-nose technologies and applications, developed specifically for the agriculture and forestry industries over the past thirty years, which have offered solutions that have greatly improved worldwide agricultural and agroforestry production systems.

  2. Diverse applications of electronic-nose technologies in agriculture and forestry.

    Science.gov (United States)

    Wilson, Alphus D

    2013-02-08

    Electronic-nose (e-nose) instruments, derived from numerous types of aroma-sensor technologies, have been developed for a diversity of applications in the broad fields of agriculture and forestry. Recent advances in e-nose technologies within the plant sciences, including improvements in gas-sensor designs, innovations in data analysis and pattern-recognition algorithms, and progress in material science and systems integration methods, have led to significant benefits to both industries. Electronic noses have been used in a variety of commercial agricultural-related industries, including the agricultural sectors of agronomy, biochemical processing, botany, cell culture, plant cultivar selections, environmental monitoring, horticulture, pesticide detection, plant physiology and pathology. Applications in forestry include uses in chemotaxonomy, log tracking, wood and paper processing, forest management, forest health protection, and waste management. These aroma-detection applications have improved plant-based product attributes, quality, uniformity, and consistency in ways that have increased the efficiency and effectiveness of production and manufacturing processes. This paper provides a comprehensive review and summary of a broad range of electronic-nose technologies and applications, developed specifically for the agriculture and forestry industries over the past thirty years, which have offered solutions that have greatly improved worldwide agricultural and agroforestry production systems.

  3. Advancing Partner Notification Through Electronic Communication Technology: A Review of Acceptability and Utilization Research.

    Science.gov (United States)

    Pellowski, Jennifer; Mathews, Catherine; Kalichman, Moira O; Dewing, Sarah; Lurie, Mark N; Kalichman, Seth C

    2016-06-01

    A cornerstone of sexually transmitted infection (STI) prevention is the identification, tracing, and notification of sex partners of index patients. Although partner notification reduces disease burden and prevents new infections as well as reinfections, studies show that only a limited number of partners are ever notified. Electronic communication technologies, namely, the Internet, text messaging, and phone calls (i.e., e-notification), have the potential to expand partner services. We conducted a systematic review of studies that have investigated the acceptability and utility of e-notification. We identified 23 studies that met the following criteria: (a) 9 studies presented data on the acceptability of technology-based communications for contacting sex partner(s), and (b) 14 studies reported on the utilization of communication technologies for partner notification. Studies found high levels of interest in and acceptability of e-notification; however, there was little evidence for actual use of e-notification. Taken together, results suggest that electronic communications could have their greatest impact in notifying less committed partners who would otherwise be uninformed of their STI exposure. In addition, all studies to date have been conducted in resource-rich countries, although the low cost of e-notification may have its greatest impact in resource-constrained settings. Research is needed to determine the best practices for exploiting the opportunities afforded by electronic communications for expanding STI partner services.

  4. Diverse Applications of Electronic-Nose Technologies in Agriculture and Forestry

    Science.gov (United States)

    Wilson, Alphus D.

    2013-01-01

    Electronic-nose (e-nose) instruments, derived from numerous types of aroma-sensor technologies, have been developed for a diversity of applications in the broad fields of agriculture and forestry. Recent advances in e-nose technologies within the plant sciences, including improvements in gas-sensor designs, innovations in data analysis and pattern-recognition algorithms, and progress in material science and systems integration methods, have led to significant benefits to both industries. Electronic noses have been used in a variety of commercial agricultural-related industries, including the agricultural sectors of agronomy, biochemical processing, botany, cell culture, plant cultivar selections, environmental monitoring, horticulture, pesticide detection, plant physiology and pathology. Applications in forestry include uses in chemotaxonomy, log tracking, wood and paper processing, forest management, forest health protection, and waste management. These aroma-detection applications have improved plant-based product attributes, quality, uniformity, and consistency in ways that have increased the efficiency and effectiveness of production and manufacturing processes. This paper provides a comprehensive review and summary of a broad range of electronic-nose technologies and applications, developed specifically for the agriculture and forestry industries over the past thirty years, which have offered solutions that have greatly improved worldwide agricultural and agroforestry production systems. PMID:23396191

  5. Nanosecond pulse-width electron diode based on dielectric wall accelerator technology

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Quantang, E-mail: zhaoquantang@impcas.ac.cn [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Zhang, Z.M.; Yuan, P.; Cao, S.C.; Shen, X.K.; Jing, Y. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Yu, C.S. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Li, Z.P.; Liu, M.; Xiao, R.Q. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Zong, Y.; Wang, Y.R. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Zhao, H.W. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China)

    2013-11-21

    An electron diode using a short section of dielectric wall accelerator (DWA) has been under development at the Institute of Modern Physics (IMP), Chinese Academy of Sciences. Tests have been carried out with spark gap switches triggered by lasers. The stack voltage efficiency of a four-layer of Blumleins reached about 60–70% with gas filled spark gap switching. The generated pulse voltage of peak amplitude of 23 kV and pulse width of 5 ns is used to extract and accelerate an electron beam of 320 mA, measured by a fast current transformer. A nanosecond pulse width electron diode was achieved successfully. Furthermore, the principle of a DWA is well proven and the development details and discussions are presented in this article. -- Highlights: •The key technology of DWA, including switches and pulse forming lines were studied. •The SiC PCSS obtained from Shanghai Institute were tested. •Two layers ZIP lines (new structure) and four layers Blumlein lines were studied with laser triggered spark gap switches. •A nanosecond pulse-width electron diode based on DWA technologies is achieved and studied experimentally. •The principle of DWA is also proved by the diode.

  6. Android and PSoC Technology Applied to Electronic Tongue Development

    Directory of Open Access Journals (Sweden)

    Alvaro Arrieta A

    2015-07-01

    Full Text Available Nowadays, in the food industry, analyzing the quality of alimentary products has become a necessity. As a result, producers have been searching for new accurate methods to analyze food quality. The development of bio-inspired devices (electronic nose and electronic tongue is a potential alternative to supply this need. The current project shows the development of a prototype circuit based on PSoC technology, which is used as a signal processing stage in an electronic tongue device with the ability to discriminate and classify samples of raw milk. In general, electronic tongues consist of electrochemical sensors array, a signals processing stage and a data processing stage. PSoC is an integrated circuit composed of analog and digital blocks into a configurable core. With the use of PSoC microchip, it is possible to develop a portable and small electrochemical device. This prototype takes measures from electrochemical sensors exposed to samples of drinks using the cyclic voltammetry technique; these signals are processed and transmitted to the next stage, which shows the response from the electrochemical sensors through an I-V curve, called voltammogram. With the development of this device, it was found that the application of PSoC technology on electrochemical measurement devices is important, due to its ability to develop cheaper, smaller, faster and sturdier devices.

  7. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  8. Conceptualization of Electronic Government Adoption

    OpenAIRE

    Rahmath Safeena; Abdullah Kammani

    2013-01-01

    E-government facilitates provision of relevant government information in electronic form to the citizens ina timely manner and better service delivery to citizens. Information Technology today is recognized as aneffective tool for turning the economic activity in efficient governance and in developing human resource.E-government is a kind of governmental administration which is based on ICT Services. The essence of egovernmentis using information technology to break the boundary of administra...

  9. Ideologies in the Swedish health sector today

    DEFF Research Database (Denmark)

    Diderichsen, Finn

    1982-01-01

    Sweden has a long tradition of social democracy and corporate cooperation. Social problems are treated as technological questions that always should be solved through rational and neutral means. Today Sweden faces a crisis of economy as well as a crisis of medicine. In the spirit of consensus......, the state has proposed a new health reform emphasizing the responsibility of the public health service to prevent disease and provide equal access to care. It is claimed that improved health planning, based on epidemiological knowledge on inequalities, can solve the crisis in medicine within an improved...... system of primary care and prevention. However, in the context of the current economic crisis, the struggle against health hazards and cuts in public spending has intensified and the gap between the ideology of technological rationalism and reality has widened....

  10. Information surety for today and tomorrow

    Energy Technology Data Exchange (ETDEWEB)

    Fletcher, S.K.

    1993-07-01

    Information Surety is the enhancement of the confidentiality, integrity, and availability of information and software systems. It is attained through sequential steps: identification of software reliability requirements and information protection needs, designing for a balanced level of risk throughout the system, and application of appropriate software and hardware technologies and procedures. The ability to apply these steps when developing systems is impaired by a general lack of understanding of surety issues by system developers, and by the fact that there are many separate areas of knowledge involved that are not currently integrated into a disciplined approach (e.g., risk assessment, information access control in computers and networks, secure messaging, trusted software development). Our best systems today are achieved by clever designers who use ad-hoc methods. In the absence of good development tools, technologies may be applied haphazardly and/or retrofitted, without yielding balanced protection. This paper will take the audience through an exploration of the elements of information surety, some common misconceptions about information surety today, and the even greater challenges on the horizon. It will end with some suggestions for research areas which will help evolve the discipline of information surety.

  11. ELECTRONIC COMMERCE PORTAL

    OpenAIRE

    Georgeta Soava

    2011-01-01

    Today companies are faced with the need to exploit technology changing computer environments, in order to improve customer satisfaction and reduce costs. A successful approach to electronic portals is an effective demonstration of the new ways of relating to the client. The objectives that we have considered for the realization of e-commerce portal can be summarized as follows: structured communication, effective collaboration, complet and closed circuit of orders and deliveries, inventory op...

  12. Packaging Technologies for 500 C SiC Electronics and Sensors: Challenges in Material Science and Technology

    Science.gov (United States)

    Chen, Liang-Yu; Neudeck, Philip G.; Behelm, Glenn M.; Spry, David J.; Meredith, Roger D.; Hunter, Gary W.

    2015-01-01

    This paper presents ceramic substrates and thick-film metallization based packaging technologies in development for 500C silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chip-level packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550C. The 96 alumina packaging system composed of chip-level packages and PCBs has been successfully tested with high temperature SiC discrete transistor devices at 500C for over 10,000 hours. In addition to tests in a laboratory environment, a SiC junction field-effect-transistor (JFET) with a packaging system composed of a 96 alumina chip-level package and an alumina printed circuit board was tested on low earth orbit for eighteen months via a NASA International Space Station experiment. In addition to packaging systems for electronics, a spark-plug type sensor package based on this high temperature interconnection system for high temperature SiC capacitive pressure sensors was also developed and tested. In order to further significantly improve the performance of packaging system for higher packaging density, higher operation frequency, power rating, and even higher temperatures, some fundamental material challenges must be addressed. This presentation will discuss previous development and some of the challenges in material science (technology) to improve high temperature dielectrics for packaging applications.

  13. An Analysis of Knowledge Sharing Approaches for Emerging-technology-based Strategic Alliances in Electronic Industry

    Institute of Scientific and Technical Information of China (English)

    LIU Ju; LI Yong-jian

    2006-01-01

    Emerging technologies are now initiating new industries and transforming old ones with tremendous power. They are different games compared with established technologies with distinctive characteristics of knowledge management in knowledge-based and technological-innovation-based competition. How to obtain knowledge advantage and enhance competences by knowledge sharing for emerging-technology-based strategic alliances (ETBSA) is what we concern in this paper. On the basis of our previous work on emerging technologies'distinctive attributes, we counter the wide spread presumption that the primary purpose of strategic alliances is knowledge acquiring by means of learning. We offers new insight into the knowledge sharing approaches of ETBSAs - the knowledge integrating approach by which each member firm integrates its partner's complementary knowledge base into the products and services and maintains its own knowledge specialization at the same time. So that ETBSAs should plan and practice their knowledge sharing strategies from the angle of knowledge integrating rather than knowledge acquiring. A four-dimensional framework is developed to analyze the advantages and disadvantages of these two knowledge sharing approaches. Some cases in electronic industry are introduced to illustrate our point of view.

  14. Today@NPS / July 2016

    OpenAIRE

    NPS Public Affairs Office

    2016-01-01

    Today@NPS showcases some of the speakers, conferences, experiments, lectures and other events that take place at the Naval Postgraduate School Contents: July 1, 2016: NPS Leadership Share Life Primers with Summer STEM Interns; July 5, 2016: Summer Quarter Welcomes Largest Incoming Class of the Year; July 6, 2016: NSAM Welcomes New Students With MWR Leisure Fair; July 7, 2016: Bowman Scholars Make the Rapid Transition to Graduate Studies; July 8, 2016: NPS Legal Details the Basics of Protec...

  15. Gender differences in technology acceptance in selected South African companies: Implications for electronic learning

    Directory of Open Access Journals (Sweden)

    Willie T. Chinyamurindi

    2010-03-01

    Full Text Available Orientation: Technology enhanced training is becoming popular as a means for the training of soft skills, especially in work-related environments. Men and women who use this type of training encounter some challenges with regard to their usage.Research: The objective of this study was to investigate trainees’ acceptance of electronic coursework as an instruction and learning technique in various industries in the South African context.Motivation for the study: A persistent gender imbalance in the South African work-place has been noted to exist chiefly in the Science, Engineering and Technology (SET sectors, areas that have an important bearing on South Africa’s global competitiveness. This study explores how gender imbalance manifests in terms of trainee acceptance of electronic coursework.Research design, approach and method: A cross-sectional survey design was used. A survey was conducted amongst 191 employees in the SET sector. The measuring instrument used was the Technology Acceptance Instrument (TAI and included measures of Computer Self-Efficacy (CSE, Perceived Ease of Use (PEU, Perceived Usefulness (PU and Behavioural Intention to Use (BI.Main findings: Women ratings of the TAI to use the electronic coursework were slightly higher than men’s ratings. Multiple regression analyses were also carried out to measure the variation in the level of influence with gender as a predictor variable. The results showed that compared to women, men had a lower salient effect of elements of the TAI, notably, CSE–PU; PU–BI and BI–PEU. However, compared to men, women had a higher salient effect in terms of the relationship between CSE–PU and PU–PEU.Practical implications: The implication of the results is that interventions that focus on the human resources development of employees using electronic coursework (namely, CSE, PEU, PU and BI are worth considering as they influence the acceptance of the interventions.Contribution/value-add: The

  16. Realization of a universal patient identifier for electronic medical records through biometric technology.

    Science.gov (United States)

    Leonard, D C; Pons, Alexander P; Asfour, Shihab S

    2009-07-01

    The technology exists for the migration of healthcare data from its archaic paper-based system to an electronic one, and, once in digital form, to be transported anywhere in the world in a matter of seconds. The advent of universally accessible healthcare data has benefited all participants, but one of the outstanding problems that must be addressed is how the creation of a standardized nationwide electronic healthcare record system in the United States would uniquely identify and match a composite of an individual's recorded healthcare information to an identified individual patients out of approximately 300 million people to a 1:1 match. To date, a few solutions to this problem have been proposed that are limited in their effectiveness. We propose the use of biometric technology within our fingerprint, iris, retina scan, and DNA (FIRD) framework, which is a multiphase system whose primary phase is a multilayer consisting of these four types of biometric identifiers: 1) fingerprint; 2) iris; 3) retina scan; and 4) DNA. In addition, it also consists of additional phases of integration, consolidation, and data discrepancy functions to solve the unique association of a patient to their medical data distinctively. This would allow a patient to have real-time access to all of their recorded healthcare information electronically whenever it is necessary, securely with minimal effort, greater effectiveness, and ease.

  17. Laser microprocessing technologies for automotive, flexible electronics, and solar energy sectors

    Science.gov (United States)

    Nikumb, Suwas; Bathe, Ravi; Knopf, George K.

    2014-10-01

    Laser microprocessing technologies offer an important tool to fulfill the needs of many industrial sectors. In particular, there is growing interest in applications of these processes in the manufacturing areas such as automotive parts fabrication, printable electronics and solar energy panels. The technology is primarily driven by our understanding of the fundamental laser-material interaction, process control strategies and the advancement of significant fabrication experience over the past few years. The wide-ranging operating parameters available with respect to power, pulse width variation, beam quality, higher repetition rates as well as precise control of the energy deposition through programmable pulse shaping technologies, enables pre-defined material removal, selective scribing of individual layer within a stacked multi-layer thin film structure, texturing of material surfaces as well as precise introduction of heat into the material to monitor its characteristic properties are a few examples. In this research, results in the area of laser surface texturing of metals for added hydrodynamic lubricity to reduce friction, processing of ink-jet printed graphene oxide for flexible printed electronic circuit fabrication and scribing of multi-layer thin films for the development of photovoltaic CuInGaSe2 (CIGS) interconnects for solar panel devices will be discussed.

  18. Fully Scaled 0.5 Micron CMOS Technology Using Variable Shaped Electron Beam Lithography

    Science.gov (United States)

    Coane, Philip; Rudeck, Paul; Wang, Li-Kong; Wilson, Alan; Hohn, Fritz

    1988-06-01

    Over the past several years, CMOS technology has been continuously driven to achieve enhanced performance and higher density. The resulting reduction in semiconductor dimensions has surpasssed the limits attainable by the most advanced optical lithography tools. As a result, the utilization of electron beam lithography direct writing techniques to satisfy VLSI patterning requirements has increased significantly. In principle, variable shaped electron beam systems are capable of writing linewidths down to at least 0.1 micron. However, the successful application of sub-micron scaling principles to device fabrication involves an integration of tool capability and resist process control. In order to achieve the realization of improved CMOS device performance and circuit density, sub-micron ground rules (line width control and overlay) must be satisfied over the full chip. This paper reports on a high performance, fully scaled 0.5 micron CMOS technology developed for VLSI appli-cations. Significant gains in both density and performance at reduced power supply levels are realized over previously reported 1.0 micron technology. The details of the integrated lithography strategy used to achieve these results are presented.

  19. Integrated Engineering Information Technology, FY93 accommplishments

    Energy Technology Data Exchange (ETDEWEB)

    Harris, R.N.; Miller, D.K.; Neugebauer, G.L.; Orona, J.R.; Partridge, R.A.; Herman, J.D.

    1994-03-01

    The Integrated Engineering Information Technology (IEIT) project is providing a comprehensive, easy-to-use computer network solution or communicating with coworkers both inside and outside Sandia National Laboratories. IEIT capabilities include computer networking, electronic mail, mechanical design, and data management. These network-based tools have one fundamental purpose: to help create a concurrent engineering environment that will enable Sandia organizations to excel in today`s increasingly competitive business environment.

  20. Towards high speed inkjet printed electronics - Technology transfer from S2S to R2R production

    NARCIS (Netherlands)

    Teunissen, P.; Rubingh, E.; Lammeren, T. van; Abbel, R.; Geijn, S. van de; Groen, P.

    2013-01-01

    An economically successful implementation of printed electronics technologies in industrial production processes requires high throughput and large scale compatible manufacturing techniques. Roll-to-roll inkjet printing and photonic sintering of metal-based conductive inks on flexible plastic substr

  1. DOE FreedomCAR and vehicle technologies program advanced power electronic and electrical machines annual review report

    Energy Technology Data Exchange (ETDEWEB)

    Olszewski, Mitch [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2006-10-11

    This report is a summary of the Review Panel at the FY06 DOE FreedomCAR and Vehicle Technologies (FCVT) Annual Review of Advanced Power Electronics and Electric Machine (APEEM) research activities held on August 15-17, 2006.

  2. Towards high speed inkjet printed electronics - Technology transfer from S2S to R2R production

    NARCIS (Netherlands)

    Teunissen, P.; Rubingh, E.; Lammeren, T. van; Abbel, R.; Geijn, S. van de; Groen, P.

    2013-01-01

    An economically successful implementation of printed electronics technologies in industrial production processes requires high throughput and large scale compatible manufacturing techniques. Roll-to-roll inkjet printing and photonic sintering of metal-based conductive inks on flexible plastic

  3. Application of FPGA technology for control of superconducting TESLA cavities in free electron laser

    Science.gov (United States)

    Pozniak, Krzysztof T.

    2006-10-01

    Contemporary fundamental research in physics, biology, chemistry, pharmacology, material technology and other uses frequently methods basing on collision of high energy particles or penetration of matter with ultra-short electromagnetic waves. Kinetic energy of involved particles, considerably greater than GeV, is generated in accelerators of unique construction. The paper presents a digest of working principles of accelerators. There are characterized research methods which use accelerators. A method to stabilize the accelerating EM field in superconducting (SC) resonant cavity was presented. An example was given of usage of TESLA cavities in linear accelerator propelling the FLASH free electron laser (FEL) in DESY, Hamburg. Electronic and photonic control system was debated. The system bases on advanced FPGA circuits and cooperating fast DSP microprocessor chips. Examples of practical solutions were described. Test results of the debated systems in the real-time conditions were given.

  4. FEATURES OF TECHNOLOGIES CREATE INTERACTIVE ELECTRONIC DOCUMENT FOR SUPPORT OF LABORATORY PRACTICAL PHYSICS

    Directory of Open Access Journals (Sweden)

    Mykola A. Meleshko

    2014-02-01

    Full Text Available The article discusses the content of the «flash-book» construct, defining its properties and possible components. There are presented some examples of components programming steps of “authoring flash – book”, considered the possibility of using such an electronic document to optimize the learning process at the Technical University in the performance of laboratory training on general physics. The technique of its using to provide individualized approach to learning and the use of various experimental base from classical to digital equipment laboratories is proposed. It was carried out the analysis of ways to improve such interactive electronic document for the development of information technology competence of engineering students.

  5. Electronic game: A key effective technology to promote behavioral change in cancer patients

    Directory of Open Access Journals (Sweden)

    Reza Safdari

    2016-01-01

    Full Text Available Cancer diagnosis is a very unpleasant and unbelievable experience. Appropriate management and treatment of these diseases require a high degree of patient engagement. Interactive health electronic games are engaging, fun, challenging, and experiential and have the potential to change the attitude and behavior, which can improve the player's health. The use of these digital tools, as one of the most attractive and entertaining modern technologies, canem power patients, provide suitable palliative care, promote health behavior change strategies, increase patient engagement, enhance healthy lifestyle habits, improve self.management, and finally improve the quality of life of the patients. Finally, the aim of this article was to describe electronic games and their effects on the promotion of behavior change in cancer patients. In addition, this article describes categories, characteristic features, and benefits of this digital media in the lifestyle modification of cancer patients.

  6. Electronic game: A key effective technology to promote behavioral change in cancer patients.

    Science.gov (United States)

    Safdari, Reza; Ghazisaeidi, Marjan; Goodini, Azadeh; Mirzaee, Mahboobeh; Farzi, Jebraeil

    2016-01-01

    Cancer diagnosis is a very unpleasant and unbelievable experience. Appropriate management and treatment of these diseases require a high degree of patient engagement. Interactive health electronic games are engaging, fun, challenging, and experiential and have the potential to change the attitude and behavior, which can improve the player's health. The use of these digital tools, as one of the most attractive and entertaining modern technologies, canem power patients, provide suitable palliative care, promote health behavior change strategies, increase patient engagement, enhance healthy lifestyle habits, improve self.management, and finally improve the quality of life of the patients. Finally, the aim of this article was to describe electronic games and their effects on the promotion of behavior change in cancer patients. In addition, this article describes categories, characteristic features, and benefits of this digital media in the lifestyle modification of cancer patients.

  7. Graphene/MoS2 hybrid technology for large-scale two-dimensional electronics.

    Science.gov (United States)

    Yu, Lili; Lee, Yi-Hsien; Ling, Xi; Santos, Elton J G; Shin, Yong Cheol; Lin, Yuxuan; Dubey, Madan; Kaxiras, Efthimios; Kong, Jing; Wang, Han; Palacios, Tomás

    2014-06-11

    Two-dimensional (2D) materials have generated great interest in the past few years as a new toolbox for electronics. This family of materials includes, among others, metallic graphene, semiconducting transition metal dichalcogenides (such as MoS2), and insulating boron nitride. These materials and their heterostructures offer excellent mechanical flexibility, optical transparency, and favorable transport properties for realizing electronic, sensing, and optical systems on arbitrary surfaces. In this paper, we demonstrate a novel technology for constructing large-scale electronic systems based on graphene/molybdenum disulfide (MoS2) heterostructures grown by chemical vapor deposition. We have fabricated high-performance devices and circuits based on this heterostructure, where MoS2 is used as the transistor channel and graphene as contact electrodes and circuit interconnects. We provide a systematic comparison of the graphene/MoS2 heterojunction contact to more traditional MoS2-metal junctions, as well as a theoretical investigation, using density functional theory, of the origin of the Schottky barrier height. The tunability of the graphene work function with electrostatic doping significantly improves the ohmic contact to MoS2. These high-performance large-scale devices and circuits based on this 2D heterostructure pave the way for practical flexible transparent electronics.

  8. Technology modules from micro- and nano-electronics for the life sciences.

    Science.gov (United States)

    Birkholz, M; Mai, A; Wenger, C; Meliani, C; Scholz, R

    2016-05-01

    The capabilities of modern semiconductor manufacturing offer remarkable possibilities to be applied in life science research as well as for its commercialization. In this review, the technology modules available in micro- and nano-electronics are exemplarily presented for the case of 250 and 130 nm technology nodes. Preparation procedures and the different transistor types as available in complementary metal-oxide-silicon devices (CMOS) and BipolarCMOS (BiCMOS) technologies are introduced as key elements of comprehensive chip architectures. Techniques for circuit design and the elements of completely integrated bioelectronics systems are outlined. The possibility for life scientists to make use of these technology modules for their research and development projects via so-called multi-project wafer services is emphasized. Various examples from diverse fields such as (1) immobilization of biomolecules and cells on semiconductor surfaces, (2) biosensors operating by different principles such as affinity viscosimetry, impedance spectroscopy, and dielectrophoresis, (3) complete systems for human body implants and monitors for bioreactors, and (4) the combination of microelectronics with microfluidics either by chip-in-polymer integration as well as Si-based microfluidics are demonstrated from joint developments with partners from biotechnology and medicine. WIREs Nanomed Nanobiotechnol 2016, 8:355-377. doi: 10.1002/wnan.1367 For further resources related to this article, please visit the WIREs website.

  9. Issues concerning global warming today

    Institute of Scientific and Technical Information of China (English)

    Zhenqiu REN

    2008-01-01

    The global weather of today is growing significantly warmer; this is an indisputable fact.However,the scientific community has not yet reached consensus on the causes of global warming and its possible consequences.This paper introduces the causes of global warming and summarizes its results,which both involve a series of huge and complex system issues.Our top priority is to pinpoint the main reason and the interrelated links between causative factors by adopting a macro-approach,or comprehensive comparison analysis.Its physical mechanism was then determined and its digital model established after quantitative study.

  10. Impure Postmodernity – Philosophy Today

    Directory of Open Access Journals (Sweden)

    David KOLB

    2012-06-01

    Full Text Available This essay discusses the situation of philosophy today in an era of mixed modern, postmodern, and traditional values and social patterns. It argues, with reference to postmodern architecture and to the German philosophers Hegel and Heidegger, that we should reject polarizing conceptual dualities, and that we need to seek out new kinds of less centered and less hierarchical unities that take advantage of the internal tensions and spacings within intellectual and cultural formations. It concludes with a discussion of the promises and problems of dialogue between Eastern and Western philosophies in today’s world.

  11. 汽车电子技术的发展与应用%Development and application of automobile electronic technology

    Institute of Scientific and Technical Information of China (English)

    蔡舒; 牟明朗

    2012-01-01

      In recent years, with the continuous development of the automotive industry and electronics industry, electronic technology used widely in modern cars, more automotive electronic control systems emerged constantly. Automobile electronic technology applications greatly improved the performance of the car in energy saving, safety, comfort, and other aspects. The application of electronic technology and development of automobile were introduced, the present situation of the application of electronic technology was comprehensively analyzed, and based on above, the automobile electronic technology development tendency and direction were put forward.%  近年来,随着汽车工业与电子工业的不断发展,电子技术在现代汽车上的应用越来越广泛,更多的汽车电子控制系统不断出现。汽车电子技术的应用极大地改善了汽车在节能、安全、舒适等方面的性能。文章介绍了汽车电子技术的应用与发展历程,全面分析了汽车电子技术的应用现状,并在此基础上,提出了汽车电子技术的发展趋势与方向。

  12. Lecture programme The reality of science today

    CERN Multimedia

    2007-01-01

    What are the new challenges and realities facing scientific research? What is its place in society today? To answer these questions, the History and Philosophy of Sciences Unit of Geneva University, in collaboration with ASPERA, the European network for astroparticle physics research, has organised a programme of lectures entitled La réalité de la science d’aujourd’hui, enjeux et défis de la diversité. This series of lectures will provide researchers and members of the public with a snapshot of the state of science today from the perspective of laboratories and institutes, and on subjects such as funding policy and technological and legal impact. The first lecture will be given by science historian Dominique Pestre (EHESS & Centre Koyré, Paris), renowned for his contributions to the analysis of science past and present, and notably one of the authors of the work "History of CERN". He will discuss the modern methods of producing scientific knowledge which have been develop...

  13. The Ef fects of Technology Usabilitiy and Individual Technology Readiness on Utilization of Electronic Document Management System (EDMS: A Research on Employee of University Hospital

    Directory of Open Access Journals (Sweden)

    Asuman Atilla

    2015-06-01

    Full Text Available Electronic Document Management System (EDMS is software which is utilized for writing, sending and storing, briefly managing the processes and operations of the corporations and institutions. In this empirical research, the statistical differences are investigated between users’ concerns about usability of mentioned technology, users’ technological readiness levels and users’ utilization status of EDMS sample is formed by 189 administrative staff of a university hospital in Ankara. According to findings, significant statistical differences are found between some dimensions of technology usability (usability effectiveness, learnability,helpfulness satisfaction, some dimensions of technology readiness (discomfort and insecurity and the utilization status (user, nonuser of EDMS.

  14. Using "Electronic Portfolios" to Challenge Current Orthodoxies in the Presentation of an Initial Teacher Training Design and Technology Activity

    Science.gov (United States)

    Spendlove, David

    2006-01-01

    The paper examines the extent to which a University undergraduate curriculum initiative provided initial teacher trainees with opportunities to challenge orthodox design methodologies through the production of an electronic portfolio within and extended design and technology activity. It was found that the "electronic portfolio" served primarily…

  15. Exploring the Use of Electronic Mobile Technologies among Distance Learners in Rural Communities for Safe and Disruptive Learning

    Science.gov (United States)

    Ntloedibe-Kuswani, Gomang Seratwa

    2013-01-01

    Several studies indicated the potential of electronic mobile technologies in reaching (safe learning) under-served communities and engaging (disruptive learning) disadvantaged peoples affording them learning experiences. However, the potential benefits of (electronic mobile learning) e-mobile learning have not been well understood from the…

  16. The Impact of Electronic Educational Technology on Ninth Grade At-Risk Reading Students: A Quantitative Investigation of Reading Achievement

    Science.gov (United States)

    Harris, Darcel

    2010-01-01

    Over 50% of American public school students read below average literacy levels. Recent research suggests that oral and print-based high school curriculum instruction require an infusion of electronic educational technology (EET), such as computer programs, online instruction, electronic thesaurus, and other devices, to better serve student need…

  17. Exploring the Use of Electronic Mobile Technologies among Distance Learners in Rural Communities for Safe and Disruptive Learning

    Science.gov (United States)

    Ntloedibe-Kuswani, Gomang Seratwa

    2013-01-01

    Several studies indicated the potential of electronic mobile technologies in reaching (safe learning) under-served communities and engaging (disruptive learning) disadvantaged peoples affording them learning experiences. However, the potential benefits of (electronic mobile learning) e-mobile learning have not been well understood from the…

  18. 32-element beta detector developed at the Institute of Electron Technology (ITE)

    Science.gov (United States)

    Wegrzecki, Maciej; Yakushev, Alexander; Bar, Jan; Budzyński, Tadeusz; Grabiec, Piotr; Kłos, Helena; Panas, Andrzej; Słysz, Wojciech; Stolarski, Maciej; Szmigiel, Dariusz; Wegrzecka, Iwona; Zaborowski, Michał

    2014-08-01

    The paper presents the design, technology and parameters of a new .silicon detector for detection of electrons (below named as beta detector) developed at the Institute of Electron Technology (ITE). The detector will be used for research on transactinide elements at the GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt (GSI). The detector consists of a monolithic 32-element array with an active area diameter of 90 mm and a thickness of 0.9 mm. The starting material is a high-resistivity ν silicon wafer (5 kΩcm resistivity). 32 planar p+-ν junctions are formed by boron diffusion on the top side of the wafer. On the bottom side, an n+ region, which forms a common cathode, is formed on the entire surface by phosphorus diffusion. The array is mounted on a special epoxy-glass laminate substrate, copper-clad on both sides. Two model detectors have been fabricated and studied. Very good electrical parameters have been achieved. For the first array, with supply voltage VR = 20 V, the minimum dark current was 8 nA, the maximum dark current 97.1 nA, and the average dark current 25.1 nA. For the second array, it was 11.5 nA, 378.8 nA and 40.0 nA respectively.

  19. Technology Maturity is Technology Superiority

    Science.gov (United States)

    2008-09-09

    Dominant Air Power: Design For Tomorrow…Deliver Today 2 TECHNOLOGY MATURITY CONFERENCE • ONE DEFINITION OF MATURITY – GOOD JUDGEMENT COMES FROM...EXPERIENCE—EXPERIENCE COMES FROM BAD JUDGEMENT Dominant Air Power: Design For Tomorrow…Deliver Today 3 TECHNOLOGY MATURITY CONFERENCE • THIS WILL BE A...2008 TECHNOLOGY MATURITY CONFERENCE “ TECHNOLOGY MATURITY IS TECHNOLOGY SUPERIORITY” Aeronautical Systems Center Dr. Tom Christian ASC/EN, WPAFB OH

  20. Application and development of ion-source technology for radiation-effects testing of electronics

    Science.gov (United States)

    Kalvas, T.; Javanainen, A.; Kettunen, H.; Koivisto, H.; Tarvainen, O.; Virtanen, A.

    2017-09-01

    Studies of heavy-ion induced single event effect (SEE) on space electronics are necessary to verify the operation of the components in the harsh radiation environment. These studies are conducted by using high-energy heavy-ion beams to simulate the radiation effects in space. The ion beams are accelerated as so-called ion cocktails, containing several ion beam species with similar mass-to-charge ratio, covering a wide range of linear energy transfer (LET) values also present in space. The use of cocktails enables fast switching between beam species during testing. Production of these high-energy ion cocktails poses challenging requirements to the ion sources because in most laboratories reaching the necessary beam energies requires very high charge state ions. There are two main technologies producing these beams: The electron beam ion source EBIS and the electron cyclotron resonance ion source ECRIS. The EBIS is most suitable for pulsed accelerators, while ECRIS is most suitable for use with cyclotrons, which are the most common accelerators used in these applications. At the Accelerator Laboratory of the University of Jyväskylä (JYFL), radiation effects testing is currently performed using a K130 cyclotron and a 14 GHz ECRIS at a beam energy of 9.3 MeV/u. A new 18 GHz ECRIS, pushing the limits of the normal conducting ECR technology is under development at JYFL. The performances of existing 18 GHz ion sources have been compared, and based on this analysis, a 16.2 MeV/u beam cocktail with 1999 MeV 126Xe44+ being the most challenging component to has been chosen for development at JYFL. The properties of the suggested beam cocktail are introduced and discussed.

  1. A Brief Review on Metamaterial-Based Vacuum Electronics for Terahertz and Microwave Science and Technology

    Science.gov (United States)

    Matsui, Tatsunosuke

    2017-09-01

    Metamaterials, which enable us to realize novel physical effects that cannot be achieved using natural materials, have been extensively studied in recent years and significant progress has been made, especially in the field of optics. This game-changing concept has also initiated a rich variety of research activity in vacuum electronics. Here we review the recent development of metamaterial-based vacuum electronics for terahertz (THz) and microwave science and technology. The reversed Cherenkov radiation (RCR) in double-negative (DNG) metamaterials predicted by Veselago back in the 1960s has been experimentally verified in the microwave frequency range by utilizing specially designed DNG metamaterials. The interaction of an electron beam (e-beam) with DNG metamaterials may lead to the realization of novel applications such as microwave and THz radiation sources, accelerators, and even the visualization of invisibility cloaks. Smith-Purcell radiation (SPR) has recently received renewed interest owing to the development of metamaterials and the concept of spoof surface plasmon polaritons, as discussed in this review, and recent results on e-beam-induced directional and wide-band THz radiation with sharp multiple peaks from a graded grating, as well as directional and monochromatic special SPR and their possible application to THz orotron devices, are also reviewed.

  2. Selected Application of Electron Beams in Solid State Materials and Devies Technology

    Directory of Open Access Journals (Sweden)

    S. C. Jain

    1980-04-01

    Full Text Available Experimental work on electron beam annealing of implanted or diffused semiconductor layers is reviewed. In the pulsed beam annealing technique, the top layer of the semiconductor melts and regrows epitaxially. All dopant atoms are frozen in electrically active state during this process. The point defects and clusters caused by radiation damage are completely annealed out. The bulk of the material remains unaffected as its temperature does not rise by more than a few degrees. In the CW electron beam annealing, the layer does not melt but due to sharp temperature gradient and high temperature of the layer, the growth of solid phase epitaxial layer is induced. However, a part of the dopant atoms may remain electrically inactive in this process of annealing. The pulsed beam annealing has also been used for growing high quality single crystal layers of germanium on silicon substrate. Recently, a new technology has been developed to grow silicon single crystal layers on amorphous substrates. Recent advances in the method of determination of lifetime using electron beams are also discussed.

  3. 数字电子技术分析及其应用%Analysis and Application of Digital Electronic Technology

    Institute of Scientific and Technical Information of China (English)

    左平

    2015-01-01

    Under the background of the rapid development of modern science and technology, digital electronic technology has been well developed, it has become the development trend of the electronic technology, application and demand in the market continues to expand, the importance of the increasingly prominent. The general situation of digital electronic technology is studied and analyzed, and the application of digital electronic technology is discussed, in order to give full play to the value of digital electronic technology, and promote its smooth development.%在当今科学技术快速发展的背景下,数字化电子技术得到了较好的发展,其已成为电子技术的发展趋势,在市场中的应用与需求不断扩大,重要性逐渐凸显。对数字电子技术的概况进行了研究和分析,并探讨了数字电子技术的应用,以便充分发挥数字电子技术的应用价值,促进其顺利发展。

  4. Implementing unique device identification in electronic health record systems: organizational, workflow, and technological challenges.

    Science.gov (United States)

    Campion, Thomas R; Johnson, Stephen B; Paxton, Elizabeth W; Mushlin, Alvin I; Sedrakyan, Art

    2014-01-01

    The United States Food and Drug Administration (FDA) has proposed creating a unique device identification (UDI) system for medical devices to facilitate postmarket surveillance, quality improvement, and other applications. Although a small number of health care institutions have implemented initiatives comparable with the proposed UDI system by capturing data in electronic health record (EHR) systems, it is unknown whether institutions with fewer resources will be able to similarly implement UDI. This paper calls attention to organizational, workflow, and technological challenges in UDI system implementation by drawing from the literature on EHR and clinical research systems implementation. Organizational challenges for UDI system implementation include coordinating multiple stakeholders to define UDI attributes and characteristics for use in EHRs, guiding organizational change within individual institutions for integrating UDI with EHRs, and guiding organizational change for reusing UDI data captured in EHRs. Workflow challenges include capturing UDI data in EHRs using keyboard entry and barcode scanning. Technological challenges involve interfacing UDI data between EHRs and surgical information systems, transforming UDI and related patient data from EHRs for research, and applying data standards to UDI within and beyond EHRs. We provide recommendations for regulations, organizational sharing, and professional society engagement to raise awareness of and overcome UDI system implementation challenges. Implementation of the UDI system will require integration of people, process, and technology to achieve benefits envisioned by FDA, including improved postmarket device surveillance and quality of care.

  5. Compatibility of Radiofrequency Surgical Sponge Detection Technology with Cardiac Implantable Electronic Devices and Temporary Pacemakers.

    Science.gov (United States)

    Salcedo, Jonathan D; Pretorius, Victor G; Hsu, Jonathan C; Lalani, Gautam G; Schricker, Amir A; Hebsur, Shrinivas M; McGARRY, Thomas J; Hunter, Jessica A; Lewis, Kathryn E; Krummen, David E; Feld, Gregory K; Birgersdotter-Green, Ulrika

    2016-11-01

    Radiofrequency (RF) technology has improved detection of retained surgical sponges with a reported 100% sensitivity and specificity. However, the potential for interactions of the RF signals emitted by the detection system with cardiac implantable electronic devices (CIEDs) or temporary pacemakers may limit its use in those patients with these devices. This study investigated whether RF detection technology causes interference or clinically significant changes in the programmed settings of implanted pacemakers and defibrillators or temporary epicardial pacemakers. Fifty patients who were scheduled either for CIED removal or placement of a temporary epicardial pacemaker (at the time of open heart surgery) were recruited for this study. Device settings and measurements from separate interrogations before and after scanning with the RF detection system were compared. For the temporary pacemakers, we observed for any changes in hemodynamics or signs of pacing interference. Twenty (40%) pacemakers, 20 (40%) implantable cardioverter defibrillators, and 10 (20%) temporary pacemakers were analyzed in this study. During scanning, no signal interference was detected in any permanent device, and there were no significant changes in programmed settings after scanning with the RF detection system. However, pacing inhibition was detected with temporary pacing systems when programmed to a synchronous mode (DDD). RF detection technology can be safely used to scan for retained surgical sponges in patients with permanent CIEDs and temporary pacemakers set to asynchronous mode. © 2016 Wiley Periodicals, Inc.

  6. Genetic data and electronic health records: a discussion of ethical, logistical and technological considerations

    Science.gov (United States)

    Shoenbill, Kimberly; Fost, Norman; Tachinardi, Umberto; Mendonca, Eneida A

    2014-01-01

    Objective The completion of sequencing the human genome in 2003 has spurred the production and collection of genetic data at ever increasing rates. Genetic data obtained for clinical purposes, as is true for all results of clinical tests, are expected to be included in patients’ medical records. With this explosion of information, questions of what, when, where and how to incorporate genetic data into electronic health records (EHRs) have reached a critical point. In order to answer these questions fully, this paper addresses the ethical, logistical and technological issues involved in incorporating these data into EHRs. Materials and methods This paper reviews journal articles, government documents and websites relevant to the ethics, genetics and informatics domains as they pertain to EHRs. Results and discussion The authors explore concerns and tasks facing health information technology (HIT) developers at the intersection of ethics, genetics, and technology as applied to EHR development. Conclusions By ensuring the efficient and effective incorporation of genetic data into EHRs, HIT developers will play a key role in facilitating the delivery of personalized medicine. PMID:23771953

  7. The academic medical center today.

    Science.gov (United States)

    Rogers, D E; Blendon, R J

    1984-05-01

    Some recent circumstances, including the nation's economic difficulties, a probable physician surplus, a declining need for acute-care medical beds, and an overwhelming public perception that medical care is too expensive, are creating serious problems for academic medical centers today. To survive, many academic medical centers probably will make certain short-term adaptations that will be viewed as undesirable by many. We suggest four initiatives that may help academic centers maintain their vital national role. These initiatives include becoming major public advocates for the medical care needs of the least fortunate; a sharp reduction in the training of subspecialists; the commitment of more of their faculty practice income to academic research, teaching, and support of low-income students; and refocusing attention on the training of young persons to be the physicians of tomorrow.

  8. Leveraging electronic healthcare record standards and semantic web technologies for the identification of patient cohorts.

    Science.gov (United States)

    Fernández-Breis, Jesualdo Tomás; Maldonado, José Alberto; Marcos, Mar; Legaz-García, María del Carmen; Moner, David; Torres-Sospedra, Joaquín; Esteban-Gil, Angel; Martínez-Salvador, Begoña; Robles, Montserrat

    2013-12-01

    The secondary use of electronic healthcare records (EHRs) often requires the identification of patient cohorts. In this context, an important problem is the heterogeneity of clinical data sources, which can be overcome with the combined use of standardized information models, virtual health records, and semantic technologies, since each of them contributes to solving aspects related to the semantic interoperability of EHR data. To develop methods allowing for a direct use of EHR data for the identification of patient cohorts leveraging current EHR standards and semantic web technologies. We propose to take advantage of the best features of working with EHR standards and ontologies. Our proposal is based on our previous results and experience working with both technological infrastructures. Our main principle is to perform each activity at the abstraction level with the most appropriate technology available. This means that part of the processing will be performed using archetypes (ie, data level) and the rest using ontologies (ie, knowledge level). Our approach will start working with EHR data in proprietary format, which will be first normalized and elaborated using EHR standards and then transformed into a semantic representation, which will be exploited by automated reasoning. We have applied our approach to protocols for colorectal cancer screening. The results comprise the archetypes, ontologies, and datasets developed for the standardization and semantic analysis of EHR data. Anonymized real data have been used and the patients have been successfully classified by the risk of developing colorectal cancer. This work provides new insights in how archetypes and ontologies can be effectively combined for EHR-driven phenotyping. The methodological approach can be applied to other problems provided that suitable archetypes, ontologies, and classification rules can be designed.

  9. Lighting for Today and Tomorrow.

    Science.gov (United States)

    Murphy, Peter

    2000-01-01

    Discusses how technology has contributed to brighter, less expensive, and more efficient lighting. Four key areas where suspended Direct/Indirect lighting out performs parabolic troffers are examined. (GR)

  10. Tomorrow`s energy today

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    This book presents the 50 award-winning projects in energy efficiency and renewable energy technologies that were selected for the Department`s 1994 National Awards Program for Energy Efficiency and Renewable Energy.

  11. Effect of Electronic Interactive Technologies Usage on Services Marketing Activities Empirical Study on Banking Sector in Jordan

    Directory of Open Access Journals (Sweden)

    Zakaria A. Azzam

    2010-06-01

    Full Text Available The importance of new technology in marketing of financial services can't be ignored. Interactive technology helpsmarketers to inexpensively engage consumers in one- to- one relationships fueled by two way conversation via mouse click oncomputer. Several organizations especially in services businesses are increasingly strengthening their marketing function byeffectively interacting with their customers with the help of sophisticated interactive technologies in an integrated manner.Enough research in the usage or adoption of electronic data interchange (EDI can be found both in information systems andmarketing literature. Therefore; it appears that different interactive technologies have been studied individually by differentresearchers. This motivates researchers to find out studies related to interactive technologies and their usage or adoptionespecially in the field of marketing activities in a developing country like Jordan. This paper attempts to understand the effectof the usage of interactive technologies in financial services businesses with the intention to derive implications for thedevelopment of interactive technologies to suit its intended users.

  12. Design of fast signal processing readout front-end electronics implemented in CMOS 40 nm technology

    Science.gov (United States)

    Kleczek, Rafal

    2016-12-01

    The author presents considerations on the design of fast readout front-end electronics implemented in a CMOS 40 nm technology with an emphasis on the system dead time, noise performance and power dissipation. The designed processing channel consists of a charge sensitive amplifier with different feedback types (Krummenacher, resistive and constant current blocks), a threshold setting block, a discriminator and a counter with logic circuitry. The results of schematic and post-layout simulations with randomly generated input pulses in a time domain according to the Poisson distribution are presented and analyzed. Dead time below 20 ns is possible while keeping noise ENC ≈ 90 e- for a detector capacitance CDET = 160 fF.

  13. Japanese power electronics inverter technology and its impact on the American air conditioning industry

    Energy Technology Data Exchange (ETDEWEB)

    Ushimaru, Kenji.

    1990-08-01

    Since 1983, technological advances and market growth of inverter- driven variable-speed heat pumps in Japan have been dramatic. The high level of market penetration was promoted by a combination of political, economic, and trade policies in Japan. A unique environment was created in which the leading domestic industries-- microprocessor manufacturing, compressors for air conditioning and refrigerators, and power electronic devices--were able to direct the development and market success of inverter-driven heat pumps. As a result, leading US variable-speed heat pump manufacturers should expect a challenge from the Japanese producers of power devices and microprocessors. Because of the vertically-integrated production structure in Japan, in contrast to the out-sourcing culture of the United States, price competition at the component level (such as inverters, sensors, and controls) may impact the structure of the industry more severely than final product sales. 54 refs., 47 figs., 1 tab.

  14. The electronic image stabilization technology research based on improved optical-flow motion vector estimation

    Science.gov (United States)

    Wang, Chao; Ji, Ming; Zhang, Ying; Jiang, Wentao; Lu, Xiaoyan; Wang, Jiaoying; Yang, Heng

    2016-01-01

    The electronic image stabilization technology based on improved optical-flow motion vector estimation technique can effectively improve the non normal shift, such as jitter, rotation and so on. Firstly, the ORB features are extracted from the image, a set of regions are built on these features; Secondly, the optical-flow vector is computed in the feature regions, in order to reduce the computational complexity, the multi resolution strategy of Pyramid is used to calculate the motion vector of the frame; Finally, qualitative and quantitative analysis of the effect of the algorithm is carried out. The results show that the proposed algorithm has better stability compared with image stabilization based on the traditional optical-flow motion vector estimation method.

  15. Characterization of Fogging and Develop-Loading Effects in Electron-Beam Direct-Writing Technology

    Science.gov (United States)

    Kon, Jun-ichi; Kojima, Yoshinori; Takahashi, Yasushi; Maruyama, Takashi; Sugatani, Shinji

    2012-06-01

    We investigated long-range critical dimension (CD) error factors, such as fogging and develop loading, to improve CD uniformity in electron-beam direct-writing (EBDW) technology. It was found that the impact of both effects reached 20 mm and the CD of the monitor pattern decreased by no less than 10%. Fogging and develop loading were separated by comparing the newly designed test patterns that were exposed using both EB and a krypton-fluoride excimer laser. We confirmed that the impact of fogging and develop loading by arranging dummy patterns with a density of 40% was estimated to be +8.9 and -18.9% in the CD, respectively. Based on success in separating each effect, fogging and develop loading were decreased by applying an antistatic agent and multipuddle development, respectively.

  16. Sensing of single electrons using micro and nano technologies: a review

    Science.gov (United States)

    Jalil, Jubayer; Zhu, Yong; Ekanayake, Chandima; Ruan, Yong

    2017-04-01

    During the last three decades, the remarkable dynamic features of microelectromechanical systems (MEMS) and nanoelectromechanical systems (NEMS), and advances in solid-state electronics hold much potential for the fabrication of extremely sensitive charge sensors. These sensors have a broad range of applications, such as those involving the measurement of ionization radiation, detection of bio-analyte and aerosol particles, mass spectrometry, scanning tunneling microscopy, and quantum computation. Designing charge sensors (also known as charge electrometers) for electrometry is deemed significant because of the sensitivity and resolution issues in the range of micro- and nano-scales. This article reviews the development of state-of-the-art micro- and nano-charge sensors, and discusses their technological challenges for practical implementation.

  17. Charting the use of electronic health records and other information technologies among child health providers

    Directory of Open Access Journals (Sweden)

    Brooks Robert G

    2006-07-01

    Full Text Available Abstract Background Previous studies regarding the use of information technologies (IT specifically among pediatricians and other physicians who treat children are lacking. As such, the objective of this study is to examine the use of electronic health record (EHR systems and other IT applications among pediatricians and other child health providers (CHPs in Florida. Methods We focus on pediatricians and other CHPs who responded to a state-wide physician survey of IT use. CHPs included general pediatricians, pediatric sub-specialists, and family physicians who self-reported a practice composition of at least 20% children. We compared general pediatricians to other CHPs and all CHPs (including pediatricians to other physicians with respect to computer and internet availability, and to the use of personal digital assistants and EHRs. Those with an EHR were also compared regarding the availability of key functions available in their system. Statistical analyses included chi-square analysis and logistic regression models which controlled for numerous factors. Results A total of 4,203 surveys (28.2% response including 1,021 CHPs, were returned. General pediatricians (13.7% were significantly less likely to be using an EHR than both CHP family physicians (26.1% and pediatric sub-specialists (29.6%; p Conclusion Physicians caring for children, and especially pediatricians, in Florida, are significantly slower than other doctors to adopt EHRs, and important electronic patient safety functionalities, into their office practices.

  18. Religious Renaissance in China Today

    Directory of Open Access Journals (Sweden)

    Richard Madsen

    2011-01-01

    Full Text Available Since the beginning of the Reform Era in 1979, there has been a rapid growth and development of religious belief and practice in China. A substantial new scholarly literature has been generated in the attempt to document and understand this. This essay identifies the most important contributions to that literature and discusses areas of agreement and controversy across the literature. Along with new data, new paradigms have developed to frame research on Chinese religions. The paradigm derived from C. K. Yang’s classic work in the 1960s came from structural functionalism, which served to unite research in the humanities and social sciences. However, structural functionalism has been abandoned by the new generation of scholars. In the humanities, the most popular paradigm derives from Michel Foucault, but there are also scholars who use neo-Durkheimian and neo-Weberian paradigms. In the social sciences, the dominant paradigms tend to focus on state-society relations. None of these paradigms fully captures the complexity of the transformations happening in China. We recommend greater dialogue between the humanities and social sciences in search of more adequate theoretical frameworks for understanding Chinese religions today.

  19. Artificial insemination in pigs today.

    Science.gov (United States)

    Knox, R V

    2016-01-01

    Use of artificial insemination (AI) for breeding pigs has been instrumental for facilitating global improvements in fertility, genetics, labor, and herd health. The establishment of AI centers for management of boars and production of semen has allowed for selection of boars for fertility and sperm production using in vitro and in vivo measures. Today, boars can be managed for production of 20 to 40 traditional AI doses containing 2.5 to 3.0 billion motile sperm in 75 to 100 mL of extender or 40 to 60 doses with 1.5 to 2.0 billion sperm in similar or reduced volumes for use in cervical or intrauterine AI. Regardless of the sperm dose, in liquid form, extenders are designed to sustain sperm fertility for 3 to 7 days. On farm, AI is the predominant form for commercial sow breeding and relies on manual detection of estrus with sows receiving two cervical or two intrauterine inseminations of the traditional or low sperm doses on each day detected in standing estrus. New approaches for increasing rates of genetic improvement through use of AI are aimed at methods to continue to lower the number of sperm in an AI dose and reducing the number of inseminations through use of a single, fixed-time AI after ovulation induction. Both approaches allow greater selection pressure for economically important swine traits in the sires and help extend the genetic advantages through AI on to more production farms.

  20. The CMS Fast Beams Condition Monitor Backend Electronics based on MicroTCA technology

    CERN Document Server

    Zagozdzinska, Agnieszka Anna

    2015-01-01

    The Fast Beams Condition Monitor (BCM1F), upgraded for LHC Run II, is one sub-system of the Beam Radiation Instrumentation and Luminosity Project of the CMS experiment. It is based on 24 single crystal CVD diamond sensors. Each sensor is metallised with two pads, being read out by a dedicated fast frontend chip produced in 130 nm CMOS technology. Signals for real time monitoring are processed by custom-made back-end electronics to measure separately rates corresponding to LHC collision products, machine induced background and residual activation exploiting different arrival times. The system is built in MicroTCA technology and uses high speed analog-to-digital converters. The data processing module designed for the FPGA allows a distinguishing of collision and machine induced background, both synchronous to the LHC clock, from the residual activation products. In operational modes of high rates, consecutive events, spaced in time by less than 12.5 ns, may partially overlap. Hence, novel signal processing tec...

  1. The Adoption and Challenges of Electronic Voting Technologies Within the South African Context

    Directory of Open Access Journals (Sweden)

    Mourine Achieng

    2013-11-01

    Full Text Available Literature has shown that countries such as Braziland India have successfully implemented electronicvoting systems and other countries are at various piloting stages to address many challenges associatedwith manual paper based system such ascosts of physical ballot paper and other overheads, electoraldelays, distribution of electoral materials, and general lack of confidence in the electoral process.It is inthis context that this study explores how South African can leverage the opportunities that e-votingpresents. Manual voting is often tedious, non-secure, and time-consuming, which leads us to think aboutusing electronic facilities to make the process more efficient. This study proposes that the adoptionofelectronic voting technologies could perhaps mitigate some of these issues and challengesin the processimproving the electoral process. The study used anon-line questionnaire which was administered to abroader group of voters and an in-depth semi-structured interview with the Independent ElectoralCommission officials. The analysis is based on thematic analysis and diffusion of innovations theory isadopted as a theoretical lens of analysis. The findings reveal that relative advantage, compatibilityandcomplexity would determine the intentions of SouthAfrican voters and the Electoral Management Bodies(IEC to adopt e-voting technologies. Moreover, thefindings also reveal several other factorsthat couldinfluence the adoption process. The study is limited to only voters in Cape Town and these voters wereexpected to have some access to the internet. The sample size limits the generalizability of the findings ofthis study.

  2. Using Technology to Improve Cancer Care: Social Media, Wearables, and Electronic Health Records.

    Science.gov (United States)

    Fisch, Michael J; Chung, Arlene E; Accordino, Melissa K

    2016-01-01

    Digital engagement has become pervasive in the delivery of cancer care. Internet- and cellular phone-based tools and systems are allowing large groups of people to engage with each other and share information. Health systems and individual health professionals are adapting to this revolution in consumer and patient behavior by developing ways to incorporate the benefits of technology for the purpose of improving the quality of medical care. One example is the use of social media platforms by oncologists to foster interaction with each other and to participate with the lay public in dialogue about science, medicine, and cancer care. In addition, consumer devices and sensors (wearables) have provided a new, growing dimension of digital engagement and another layer of patient-generated health data to foster better care and research. Finally, electronic health records have become the new standard for oncology care delivery, bringing new opportunities to measure quality in real time and follow practice patterns, as well as new challenges as providers and patients seek ways to integrate this technology along with other forms of digital engagement to produce more satisfaction in the process of care along with measurably better outcomes.

  3. Applying semantic web technologies for phenome-wide scan using an electronic health record linked Biobank

    Directory of Open Access Journals (Sweden)

    Pathak Jyotishman

    2012-12-01

    Full Text Available Abstract Background The ability to conduct genome-wide association studies (GWAS has enabled new exploration of how genetic variations contribute to health and disease etiology. However, historically GWAS have been limited by inadequate sample size due to associated costs for genotyping and phenotyping of study subjects. This has prompted several academic medical centers to form “biobanks” where biospecimens linked to personal health information, typically in electronic health records (EHRs, are collected and stored on a large number of subjects. This provides tremendous opportunities to discover novel genotype-phenotype associations and foster hypotheses generation. Results In this work, we study how emerging Semantic Web technologies can be applied in conjunction with clinical and genotype data stored at the Mayo Clinic Biobank to mine the phenotype data for genetic associations. In particular, we demonstrate the role of using Resource Description Framework (RDF for representing EHR diagnoses and procedure data, and enable federated querying via standardized Web protocols to identify subjects genotyped for Type 2 Diabetes and Hypothyroidism to discover gene-disease associations. Our study highlights the potential of Web-scale data federation techniques to execute complex queries. Conclusions This study demonstrates how Semantic Web technologies can be applied in conjunction with clinical data stored in EHRs to accurately identify subjects with specific diseases and phenotypes, and identify genotype-phenotype associations.

  4. Solar electric buildings: An overview of today`s applications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    This brochure presents a broad look at photovoltaic-powered buildings. It includes residential and commercial systems, both stand-alone and connected to utility power, that are located in urban, near-urban, and rural settings around the world. As photovoltaic (PV) technology continues to improve and costs drop, opportunities for PV will multiply. PV systems for buildings, such as those shown here, represent one of the strongest near-term markets.

  5. The outlook of innovative optical-electronic technologies implementation in transportation

    Science.gov (United States)

    Shilina, Elena V.; Ryabichenko, Roman B.

    2005-06-01

    Information and telecommunication technologies (ITT) are already tool economic development of society and their role will grow. The first task is providing of information security of ITT that is necessary for it distribution in "information" society. The state policy of the leading world countries (USA, France, Japan, Great Britain and China) is focused on investment huge funds in innovative technologies development. Within the next 4-6 years the main fiber-optic transfer lines will have data transfer speed 40 Gbit/s, number of packed channels 60-200 that will provide effective data transfer speed 2,4-8 Tbit/s. Photonic-crystalline fibers will be promising base of new generation fiber-optic transfer lines. The market of information imaging devices and digital photo cameras will be grown in 3-5 times. Powerful lasers based on CO2 and Nd:YAG will be actively used in transport machinery construction when producing aluminum constructions of light rolling-stock. Light-emitting diodes (LEDs) will be base for energy saving and safety light sources used for vehicles and indoor lighting. For example, in the USA cost reducing for lighting will be 200 billion dollars. Implementation analysis of optic electronic photonic technologies (OPT) in ground and aerospace systems shows that they provide significant increasing of traffic safety, crew and passengers comfort with help of smart vehicles construction and non-contact dynamic monitoring both transport facilities (for example, wheel flanges) and condition of rail track (road surface), equipping vehicles with night vision equipment. Scientific-technical programs of JSC "RZD" propose application of OPT in new generation systems: axle-box units for coaches and freight cars monitoring when they are moved, track condition analysis, mechanical stress and permanent way irregularity detection, monitoring geometric parameters of aerial contact wire, car truck, rail and wheel pair roll surface, light signals automatic detection from

  6. OCLC: Yesterday, Today and Tomorrow.

    Science.gov (United States)

    Smith, K. Wayne

    1998-01-01

    Discusses the Online Computer Library Center's (OCLC) evolution as an organization, highlighting its nonprofit status, financial philosophy, membership role in governance, collections and technical services, resource sharing, and reference services. Presents a chronology of OCLC products, services, and technological innovation 1967-1997. (PEN)

  7. Our Brave New World Today

    Science.gov (United States)

    Stivers, Richard

    2010-01-01

    Aldous Huxley is perhaps the only author to have written a work of science fiction and a work of nonfiction to ascertain whether fiction had become reality. Both "Brave New World" and "Brave New World Revisited" are discussed and compared with Jacques Ellul's work on technology.

  8. The Status of Hitler Today

    Directory of Open Access Journals (Sweden)

    Ben Novak

    2009-12-01

    Full Text Available A finales del siglo XX, podía afirmarse que Hitler estaba más vivo y con más influencia que en la cumbre de su poder medio siglo antes. ¿Cómo ha alcanzado Hitler esta posición? ¿No está muerto? ¿Cómo puede ser tan prominente más de cincuenta años después de su defunción? Esta cuestión de Hitler en la actualidad posee diversos problemas históricos que están íntimamente conectados con otros morales. En este trabajo, sin embargo, pretendo concentrarme primordialmente en su dimensión histórica. A la luz del sorprendente ascenso de Hitler en la moderna conciencia histórica, esto puede llevarnos a la siguiente pregunta: ¿No hemos otorgado al dictador nazi un poder aún mayor que cuando estaba vivo y comandando sus divisiones de la Wehrmacht en el punto culminante de sus conquistas?___________________ABSTRACT:By the end of the twentieth century, it can be said, Hitler was more alive and prominent than at the height of his power a half-century before. How did Hitler become this way? Isn’t he dead? How can he become so prominent more than half a century after his death? The issue of Hitler today poses several historical problems that are deeply moral problems as well. In this work, however, I intend to concentrate primarily on their historical dimension. In light of Hitler’s astonishing rise in modern historical consciousness, this leads to the inevitable question: Have we not granted to Hitler a far greater power over us than ever he had when he was alive and commanding his Wehrmacht divisions at the farthest extent of his conquests?

  9. CONTROL OF METAL SURFACES MACHINED IN ACCORDANCE WITH THE DIAMOND NANOMACHINING TECHNOLOGY BASED ON THE ELECTRON WORK FUNCTION

    Directory of Open Access Journals (Sweden)

    G. V. Sharonov

    2015-01-01

    Full Text Available Dimensional machining technology is based on the use of integrated geometric parameters of machined surfaces. Technological impact of a pick results in oxidation processes and changes in physic-chemical parameters of surface. Control of only geometric parameters is insufficient to describe characteristics of machining and formation of ultra-smooth surfaces. The electron work function is therefore used. The aim of the work was to study electrophysical states of optic surfaces of non-ferrous metals and alloys in relation to geometric and physic-chemical parameters according to the distribution of the electron work function over the surface. We conducted the study on experimental metal samples made of copper and aluminum alloy, machined in accordance with the diamond nanomachining technology. The diamond nanomachining technology would be capable of ensuring the roughness of non-ferrous metals and alloys machined at the level of Ra ≤ 0,005 µm. Modernized Kelvin probe was used as the registration technique of the changes of the electron work function over the surface. Dependence between the electron work function value, as well as its alteration and the physicchemical and geometric parameters of a surface has been determined. It has been shown that the diamond nanomachining technology makes it possible to obtain electro-physically uniform optical surfaces on copper and aluminum alloy with the minimal range of the distribution of the electric potential over the surface. 

  10. Design and simulation of cellular nonlinear networks using single-electron tunneling transistor technology

    Science.gov (United States)

    Gerousis, Costa P.

    It is currently predicted that semiconductor device scaling will end at the 22-nm device feature size (7 nm physical channel length) according to the International Technology Roadmap for Semiconductors. The main challenge is then to develop innovative technologies that will extend the scaling beyond roadmap projection. Any new technology must be well matched with complementary metal oxide semiconductor (CMOS) technology and scaleable beyond CMOS scaling projections and must provide low-power high-speed signal processing. Nanotechnology will become an appealing option for developing devices for integrated circuits with dimensions and performances well beyond roadmap predictions. Such devices, based on the controllable transfer of charge between dots or 'islands', can take advantage of the quantum mechanical effects, such as tunneling and energy quantization, which would normally occur at the nanometer scale. An outstanding challenge is in arranging such nanodevices in new architectures that can be integrated on a single chip. In particular, locally interconnected architectures are believed to be necessary to alleviate the problems associated with increasing interconnect length and complexity in ultra-dense circuits. The goal of this work is to investigate the use of nanoelectronic structures in cellular non-linear network (CNN) architectures for potential application in future high-density and low-power CMOS-nanodevice hybrid circuits. The operation of the single-electron tunneling (SET) transistor is first reviewed, followed by a discussion of simple CNN linear architectures using a SET inverter topology as the basis for the non-linear transfer characteristics for individual cells to be used in analog processing arrays for image-processing applications. The basic SET CNN cell acts as a summing node that is capacitively coupled to the inputs and outputs of nearest neighbor cells. Monte Carlo simulation results are used to show CNN-like behavior in attempting to

  11. Technology Convergence and Divergence in China's Electronic Industries: Evidence from Patents

    Institute of Scientific and Technical Information of China (English)

    CHEN Xiang-dong; LIU Xiao-qing

    2006-01-01

    By thoroughly reviewing international studies on technology convergence and divergence, four kinds of hypothesis are proposed based on patent data Herfindhal Index (HI)measurement. The main finding is that technology convergence does exist, based on patent technology records in China, primarily driven by overseas companies' strategic behavior, such as field intensiveness, competition during technology maturity session, and patent technology growth.

  12. PREFACE: 16th International Summer School on Vacuum, Electron, and Ion Technologies (VEIT 2009)

    Science.gov (United States)

    Möller, Wolfhard; Guerassimov, Nikolay; Ghelev, Chavdar

    2010-04-01

    The International Summer School on Vacuum, Electron and Ion Technologies (VEIT) has been organized biennially since 1977 when the series of VEIT Schools was launched by the Institute of Electronics, Bulgarian Academy of Sciences with the aim to act as a forum for interchange and dissemination of knowledge and ideas on the latest developments in electron-, ion-, and plasma-assisted technologies. Beginning from 2001, the school has been jointly organized with the Institute of Ion Beam Physics and Materials Research, Forschungszentrum Dresden-Rossendorf, Germany. Whereas, the school initially provided a meeting place for researchers mainly from Eastern and Central European countries, its importance grew issue by issue. The school is now a major scientific event and a meeting place for young scientists from Eastern and Western Europe involved in research and development associated with high-tech industries. Many former school participants have gone on to become leading scientists in research establishments and companies throughout the world. Leading international companies, such as High Voltage Engineering, Balzers, Varian, and Hauzer have used the VEIT forum to present their products through oral presentations, poster contributions or exhibits. The School Proceedings have been published in special issues of the international journals Vacuum, Plasma Processes and Polymers, Journal of Physics: Conference Series. The Sixteenth VEIT school was held in the Black Sea resort Sunny Beach, Bulgaria on 28 September to 2 October 2009. It was attended by close to 110 participants from 13 countries: Belgium, Bulgaria, Czech Republic, France, Germany, The Netherlands, Romania, Slovak Republic, Spain, Sweden, Ukraine, UK and USA. Following the tradition of publishing the VEIT Proceedings, a selection of papers presented at the event is published in this volume of Journal of Physics: Conference Series, under the originality and quality criteria of acceptance by the journal, including

  13. EDITORIAL: 17th International Summer School on Vacuum, Electron, and Ion Technologies (VEIT 2011)

    Science.gov (United States)

    van de Sanden, M. C. M.; Dimitrova, Miglena; Ghelev, Chavdar

    2012-03-01

    The International Summer School on Vacuum, Electron and Ion Technologies (VEIT) has been organized biennially since 1977, when the VEIT Summer School series was launched by the Institute of Electronics, Bulgarian Academy of Sciences. The aim was to act as a forum for the exchange and dissemination of knowledge and ideas on the latest developments in electron-, ion- and plasma-assisted technologies. The organizers of the 2011 edition of the event were the Institute of Electronics, Bulgarian Academy of Sciences, Sofia, Bulgaria and the Department of Applied Physics, Eindhoven University of Technology, Eindhoven, The Netherlands. Whilst the school initially provided a meeting place for researchers mainly from Eastern and Central European countries, its importance has grown issue by issue. The school is now a major scientific event and a meeting place for young scientists from Eastern and Western Europe involved in research and development associated with high-tech industries. Many former school participants have gone on to become leading scientists in research establishments and companies throughout the world. Leading international companies, such as High Voltage Engineering, Balzers, Varian, and Hauzer have used the VEIT forum to present their products through oral presentations, poster contributions and exhibits. The School Proceedings have been published in special issues of the international journals Vacuum, Plasma Processes and Polymers and Journal of Physics: Conference Series. The Seventeenth edition of VEIT was held in the Black Sea resort of Sunny Beach, Bulgaria on 19-23 September 2011. It was attended by 96 participants from 18 countries: Belgium, Brazil, Bulgaria, Czech Republic, Denmark, France, Germany, Greece, The Netherlands, Romania, Russia, Serbia, Sweden, Switzerland, Turkey, Ukraine, UK and USA. Following the tradition of publishing the VEIT Proceedings, a selection of papers presented at the event is published in this special issue of Journal of

  14. Preparing Today's Nursing Students for Tomorrow's Career.

    Science.gov (United States)

    Wynn, Stephanie

    2016-01-01

    Federal directives, nursing and nursing education associations, as well as accrediting bodies emphasize the importance of integrating health information technology and EHRs into nursing practice. Additionally, informatics is a required competency of baccalaureate nursing graduates. Nursing education's efforts to enhance students' learning in the area of electronic documentation is at its peak. The goal of enabling nurses to make healthcare safer, more effective, efficient, patient-centered, timely and equitable can only be achieved if a variety of technologies are clearly integrated into nursing education. Therefore, some schools have developed educational innovations to incorporate academic EHRs. As the mental health setting is unique, extraordinary attention has to be provided during the education of electronic documentation. Nursing education efforts must focus on interventions that provide resources that enhance the participant's knowledge and skills related to electronic documentation in a variety of clinical settings. Additionally, implementing academic EHRs in clinical settings offers nursing educators an opportunity to note the benefits. The state of nursing education depends on the accessibility to utilize academic EHRs in the nursing curriculum within the clinical setting to effectively prepare students for real-word practice.

  15. Introduction to laser technology

    CERN Document Server

    Hitz, C Breck; Hecht, Jeff; Hitz, C Breck; John Wiley & Sons

    2001-01-01

    Electrical Engineering Introduction to Laser Technology , Third Edition. Would you like to know how a laser works, and how it can be modified for your own specific tasks? This intuitive third edition-previously published as Understanding Laser Technology , First and Second Editions-introduces engineers, scientists, technicians, and novices alike to the world of modern lasers, without delving into the mathematical details of quantum electronics. It is the only introductory text on the market today that explains the underlying physics and engineering applicable to all lasers. A unique combinatio.

  16. The esoteric milieu in Finland today

    Directory of Open Access Journals (Sweden)

    Jussi Sohlberg

    2008-01-01

    Full Text Available As in the other Scandinavian countries, so in Finland an exceptionally high percentage of the population belongs to a religious community. Today, about 82 per cent of Finns are members of the Evangelical Lutheran Church. However, the picture of the Finnish religious and spiritual landscape is more complex than it may at first appear. The project ‘Religions in Finland’ was started in 2003. The project is a joint-effort of the Church Research Institute and the Research Network for the Study of New Religious Movements. The aim is to create an electronic database for describing, mapping and analysing religious associations and communities in Finland (active ones and also those that no longer exist. In August 2007 there were 777 communities and organizations listed in the database. They are classified into ten categories representing religious traditions according to their historical and cultural background. There are 29 organizations classified under the category Western esotericism. This article presents a general overview of the major and recently founded esoteric groups in Finland, most of which are registered associations.

  17. Influences of Inadequate Instructional Materials and Facilities in Teaching and Learning of Electrical/Electronics Technology Education Courses

    Science.gov (United States)

    Ogbu, James E.

    2015-01-01

    This study investigated the influences of inadequate instructional materials and facilities in the teaching and learning of electrical/electronics (E/E) technology education courses. The study was guided by two research questions and two null hypotheses which were tested at 0.05 level of significance. The design employed was descriptive survey…

  18. Integration of the Systems Approach and Electronic Technology in Learning and Teaching Music. Report on Federal Project #1309.

    Science.gov (United States)

    Knuth, Alice M.

    To determine the use of technology in elementary school music instruction, a research project was conducted with 19 third and 24 fifth grade students and 24 college music education students, testing (1) music learning system with behavioral objectives, instructional specifications, and data analysis; and (2) an electronic keyboard instrument,…

  19. From the Islands of Knowledge to a Shared Understanding: Interdisciplinarity and Technology Literacy for Innovation in Smart Electronic Product Design

    Science.gov (United States)

    Blanco, Teresa; Casas, Roberto; Manchado-Pérez, Eduardo; Asensio, Ángel; López-Pérez, Jose M.

    2017-01-01

    In the context of the evolving Internet, a balance between technological advances and meaning change is crucial to develop innovative and breakthrough "connected electronics" that enable the Internet of Things. Designers and technologists are key enablers of this process respectively, ensuring adequate users' needs and technology…

  20. Validating the Technology Acceptance Model in the Context of the Laboratory Information System-Electronic Health Record Interface System

    Science.gov (United States)

    Aquino, Cesar A.

    2014-01-01

    This study represents a research validating the efficacy of Davis' Technology Acceptance Model (TAM) by pairing it with the Organizational Change Readiness Theory (OCRT) to develop another extension to the TAM, using the medical Laboratory Information Systems (LIS)--Electronic Health Records (EHR) interface as the medium. The TAM posits that it is…

  1. Validating the Technology Acceptance Model in the Context of the Laboratory Information System-Electronic Health Record Interface System

    Science.gov (United States)

    Aquino, Cesar A.

    2014-01-01

    This study represents a research validating the efficacy of Davis' Technology Acceptance Model (TAM) by pairing it with the Organizational Change Readiness Theory (OCRT) to develop another extension to the TAM, using the medical Laboratory Information Systems (LIS)--Electronic Health Records (EHR) interface as the medium. The TAM posits that it is…

  2. Augmented Reality in Sports: Today and Tomorrow

    Directory of Open Access Journals (Sweden)

    Zafer BOZYER

    2015-08-01

    Full Text Available The rapid change experienced in the field of Information Technologies makes the informati cs more tangible in daily life. Today, it became possible to encounter with the informatics applications almost all the disciplines. As a matter of course, many informatics applications are put into the practice regarding the sports discipline. Because of the condition that the power of information processing has increased and the studies on wearable technol ogies in addition to the expert system design, augmented reality (AR has become a topic which gains imp ortance in the field of sports. There are many studies that are conducted with the aim of increasing the efficiency of physical activities done in many sports branches, ensuring a more fair management of competitions and providing the opportunity for spectators to watch the competitions in a more comfortable and efficient way. In this study; the information about the current augmented reality practices th at are used in various sports branches has been given and the mobile and interactive augmented reality practices which are possible to be seen in future have been mentioned. In addition, there is an augmented reality practice which is designed with the aim of ensuring that the shoots of sports people who are interested in archery, are more stable and of ensuring that the trainings and exercises are more efficient by stating to the sports people whether he or she is in the right position for shoot which is c alled as T shape seen at the time of releasing the arrow.

  3. Educational Technology: A Review of the Integration, Resources, and Effectiveness of Technology in K-12 Classrooms

    Science.gov (United States)

    Delgado, Adolph J.; Wardlow, Liane; McKnight, Katherine; O'Malley, Kimberly

    2015-01-01

    There is no questioning that the way people live, interact, communicate, and conduct business is undergoing a profound, rapid change. This change is often referred to as the "digital revolution," which is the advancement of technology from analog, electronic and mechanical tools to the digital tools available today. Moreover, technology…

  4. Educational Technology: A Review of the Integration, Resources, and Effectiveness of Technology in K-12 Classrooms

    Science.gov (United States)

    Delgado, Adolph J.; Wardlow, Liane; McKnight, Katherine; O'Malley, Kimberly

    2015-01-01

    There is no questioning that the way people live, interact, communicate, and conduct business is undergoing a profound, rapid change. This change is often referred to as the "digital revolution," which is the advancement of technology from analog, electronic and mechanical tools to the digital tools available today. Moreover, technology…

  5. Detection of off-flavor in catfish using a conducting polymer electronic-nose technology.

    Science.gov (United States)

    Wilson, Alphus D; Oberle, Charisse S; Oberle, Daniel F

    2013-11-25

    The Aromascan A32S conducting polymer electronic nose was evaluated for the capability of detecting the presence of off-flavor malodorous compounds in catfish meat fillets to assess meat quality for potential merchantability. Sensor array outputs indicated that the aroma profiles of good-flavor (on-flavor) and off-flavor fillets were strongly different as confirmed by a Principal Component Analysis (PCA) and a Quality Factor value (QF > 7.9) indicating a significant difference at (P flavor and off-flavor catfish at high levels of accuracy (>90%) and with relatively low rates (≤5%) of unknown or indecisive determinations in three trials. This A32S e-nose instrument also was capable of detecting the incidence of mild off-flavor in fillets at levels lower than the threshold of human olfactory detection. Potential applications of e-nose technologies for pre- and post-harvest management of production and meat-quality downgrade problems associated with catfish off-flavor are discussed.

  6. Electron Beam Melting Manufacturing Technology for Individually Manufactured Jaw Prosthesis: A Case Report.

    Science.gov (United States)

    Suska, Felicia; Kjeller, Göran; Tarnow, Peter; Hryha, Eduard; Nyborg, Lars; Snis, Anders; Palmquist, Anders

    2016-08-01

    In the field of maxillofacial reconstruction, additive manufacturing technologies, specifically electron beam melting (EBM), offer clinicians the potential for patient-customized design of jaw prostheses, which match both load-bearing and esthetic demands. The technique allows an innovative, functional design, combining integrated porous regions for bone ingrowth and secondary biological fixation with solid load-bearing regions ensuring the biomechanical performance. A patient-specific mandibular prosthesis manufactured using EBM was successfully used to reconstruct a patient's mandibular defect after en bloc resection. Over a 9-month follow-up period, the patient had no complications. A short operating time, good esthetic outcome, and high level of patient satisfaction as measured by quality-of-life questionnaires-the European Organisation for Research and Treatment of Cancer QLQ-C30 (30-item quality-of-life core questionnaire) and H&N35 (head and neck cancer module)-were reported for this case. Individually planned and designed EBM-produced prostheses may be suggested as a possible future alternative to fibular grafts or other reconstructive methods. However, the role of porosity, the role of geometry, and the optimal combination of solid and porous parts, as well as surface properties in relation to soft tissues, should be carefully evaluated in long-term clinical trials. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  7. Frictional and bone ingrowth properties of engineered surface topographies produced by electron beam technology.

    Science.gov (United States)

    Biemond, J Elizabeth; Aquarius, René; Verdonschot, Nico; Buma, Pieter

    2011-05-01

    Electron beam melting (E-beam) is a new technology to produce 3-dimensional surface topographies for cementless orthopedic implants. The friction coefficients of two newly developed E-beam produced surface topographies were in vitro compared with sandblasted E-beam and titanium plasma sprayed controls. Bone ingrowth (direct bone-implant contact) was determined by implanting the samples in the femoral condyles of 6 goats for a period of 6 weeks. Friction coefficients of the new structures were comparable to the titanium plasma sprayed control. The direct bone-implant contact was 23.9 and 24.5% for the new surface structures. Bone-implant contact of the sandblasted and titanium plasma sprayed control was 18.2 and 25.5%, respectively. The frictional and bone ingrowth properties of the E-beam produced surface structures are similar to the plasma-sprayed control. However, since the maximal bone ingrowth had not been reached for the E-beam structures during the relatively short-term period, longer-term follow-up studies are needed to assess whether the E-beam structures lead to a better long-term performance than surfaces currently in use, such as titanium plasma spray coating.

  8. A Technology Acceptance Model for Inter-Organisational Electronic Medical Records Systems

    Directory of Open Access Journals (Sweden)

    Jocelyn Handy

    2001-11-01

    Full Text Available This article reports the findings of the first stage of an ongoing, longitudinal study into the implementation of an interorganisational electronic medical records (EMR system. The study adapted and expanded Davis' (1993 technology acceptance model (TAM to investigate the attitudes of primary care practitioners towards a proposed system for maternity patients. All doctors and midwives holding maternity care contracts with a large urban hospital in New Zealand were sent a questionnaire soliciting their views on a planned EMR system linking the hospital and the primary care sectors. The results showed that whilst Davis' two key factors of perceived ease of use and perceived usefulness were important to medical professionals, another key factor, perceived system acceptability, which concerns control and management of information is vitally important to the acceptance of the system. The study also showed that the two groups of professionals had differing requirements due to different levels of experience and practice computerisation. Finally, the research highlights a number of wider organisational issues particularly relevant to the use of inter organisational systems in general and healthcare systems in particular.

  9. A Proposal to Integrate the Management of Electronic Waste into the Curriculum of Primary Schools

    Science.gov (United States)

    de Jager, Thelma

    2015-01-01

    Today's children are growing up in an environmentally damaged and technology orientated world. The advent and advances of technology, has resulted in the production of millions of electronic devices, which eventually become waste when they reach their end-of-life. These devices contain toxic components that are not only polluting the environment…

  10. In situ bioremediation of nitrate and perchlorate in vadose zone soil for groundwater protection using gaseous electron donor injection technology.

    Science.gov (United States)

    Evans, Patrick J; Trute, Mary M

    2006-12-01

    When present in the vadose zone, potentially toxic nitrate and perchlorate anions can be persistent sources of groundwater contamination. Gaseous electron donor injection technology (GEDIT), an anaerobic variation of petroleum hydrocarbon bioventing, involves injecting electron donor gases, such as hydrogen or ethyl acetate, into the vadose zone, to stimulate biodegradation of nitrate and perchlorate. Laboratory microcosm studies demonstrated that hydrogen and ethanol promoted nitrate and perchlorate reduction in vadose zone soil and that moisture content was an important factor. Column studies demonstrated that transport of particular electron donors varied significantly; ethyl acetate and butyraldehyde were transported more rapidly than butyl acetate and ethanol. Nitrate removal in the column studies, up to 100%, was best promoted by ethyl acetate. Up to 39% perchlorate removal was achieved with ethanol and was limited by insufficient incubation time. The results demonstrate that GEDIT is a promising remediation technology warranting further validation.

  11. Space Biology in Russia Today

    Science.gov (United States)

    Grigoriev, Anatoly; Sychev, Vladimir; Ilyin, Eugene

    At present space biology research in Russia is making significant progress in several areas of high priority. Gravitational biology. In April-May 2013, a successful 30-day flight of the biological satellite (biosatellite) Bion-M1 was conducted, which carried rodents (mice and gerbils), geckos, fish, mollusks, crustaceans, microorganisms, insects, lower and higher plants, seeds, etc. The investigations were performed by Russian scientists as well as by researchers from NASA, CNES, DLR and South Korea. Foton-M4 carrying various biological specimens is scheduled to launch in 2014. Work has begun to develop science research programs to be implemented onboard Bion-M2 and Bion-M3 as well as on high apogee recoverable spacecraft. Study of the effects of microgravity on the growth and development of higher plants cultivated over several generations on the International Space Station (ISS) has been recently completed. Space radiobiology. Regular experiments aimed at investigating the effects of high-energy galactic cosmic rays on the animal central nervous system and behavior are being carried out using the Particle Accelerator in the town of Dubna. Biological (environmental) life support systems. In recent years, experiments have been performed on the ISS to upgrade technologies of plant cultivation in microgravity. Advanced greenhouse mockups have been built and are currentlyundergoing bioengineering tests. Technologies of waste utilization in space are being developed. Astrobiology experiments in orbital missions. In 2010, the Biorisk experiment on bacterial and fungal spores, seeds and dormant forms of organisms was completed. The payload containing the specimens was installed on the exterior wall of the ISS and was exposed to outer space for 31 months. In addition, Bion-M1 also carried seeds, bacterial spores and microbes that were exposed to outer space effects. The survival rate of bacterial spores incorporated into man-made meteorites, that were attached to the

  12. PREFACE: Fifteenth International Summer School on Vacuum, Electron and Ion Technologies (VEIT 2007)

    Science.gov (United States)

    Guerassimov, Nikolay; Möller, Wolfhard; Ghelev, Chavdar

    2008-03-01

    The International Summer School on Vacuum, Electron and Ion Technologies (VEIT) has been organized biannually since 1977. It is a forum for the interchange and dissemination of knowledge and ideas on the latest developments in electron-, ion-, and plasma-assisted technologies. The organizers of the event (since 2001) have been the Institute of Electronics, Bulgarian Academy of Sciences, Sofia, Bulgaria, the Institute of Ion Beam Physics and Materials Research, Forschungszentrum Dresden-Rossendorf, Dresden, Germany, and the Evrika Foundation, Sofia, Bulgaria. The fifteenth meeting of VEIT was held in the Black Sea resort of Sozopol, Bulgaria from 17-21 September 2007 and was attended by around 120 participants from 17 countries: Australia, Belgium, Bulgaria, Canada, Czech Republic, Germany, Hungary, Italy, The Netherlands, Poland, Pakistan, Romania, Sweden, Switzerland, Ukraine, UK and USA. Following the tradition of publishing the VEIT Proceedings, a selection of papers presented at the event is published in this volume of Journal of Physics: Conference Series, all peer reviewed to meet the originality and quality criteria of the journal. The school consisted of 11 oral and 3 poster sessions. There were 17 invited talks of general interest and 12 progress reports were presented orally. In total 86 contributed papers were presented during the three poster sessions. There were several scientific highlights covering the fundamentals of gas discharges and interaction of fast particles with solids, a wide range of conventional and novel applications such as for hard coatings and optical/protective layers, nanosized structures produced by evaporation, sputtering or external irradiation. Recent achievements in the modification of materials using charged particles or laser beams, thin layers deposition, properties, and characterization and novel materials, techniques, devices were highlighted. Despite the busy scientific program, the atmosphere was relaxed and informal

  13. Nutrition Education Today. A Curriculum Development Project.

    Science.gov (United States)

    California State Dept. of Education, Sacramento.

    Nutrition Education Today is a state-funded curriculum project that addresses the behavioral aspects of nutrition as well as the nutritional knowledge of secondary school students in California. The curriculum design for the Nutrition Education Today project is a result of the efforts of a statewide task force of specialists in the area of…

  14. Communicative Language Teaching Today. Portfolio Series #13

    Science.gov (United States)

    Richards, Jack C.

    2005-01-01

    This booklet examines the methodology known as Communicative Language Teaching or CLT and explores the assumptions it is based on, its origins and evolution since it was first proposed in the 1970s, and how it has influenced approaches to language teaching today. It serves to review what has been learned from CLT and what its relevance is today. A…

  15. Current status and future perspectives of electron interactions with molecules, clusters, surfaces, and interfaces [Workshop on Fundamental challenges in electron-driven chemistry; Workshop on Electron-driven processes: Scientific challenges and technological opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Becker, Kurt H.; McCurdy, C. William; Orlando, Thomas M.; Rescigno, Thomas N.

    2000-09-01

    This report is based largely on presentations and discussions at two workshops and contributions from workshop participants. The workshop on Fundamental Challenges in Electron-Driven Chemistry was held in Berkeley, October 9-10, 1998, and addressed questions regarding theory, computation, and simulation. The workshop on Electron-Driven Processes: Scientific Challenges and Technological Opportunities was held at Stevens Institute of Technology, March 16-17, 2000, and focused largely on experiments. Electron-molecule and electron-atom collisions initiate and drive almost all the relevant chemical processes associated with radiation chemistry, environmental chemistry, stability of waste repositories, plasma-enhanced chemical vapor deposition, plasma processing of materials for microelectronic devices and other applications, and novel light sources for research purposes (e.g. excimer lamps in the extreme ultraviolet) and in everyday lighting applications. The life sciences are a rapidly advancing field where the important role of electron-driven processes is only now beginning to be recognized. Many of the applications of electron-initiated chemical processes require results in the near term. A large-scale, multidisciplinary and collaborative effort should be mounted to solve these problems in a timely way so that their solution will have the needed impact on the urgent questions of understanding the physico-chemical processes initiated and driven by electron interactions.

  16. MSM 2010 Theme Monograph Psychopharmacology Today

    Directory of Open Access Journals (Sweden)

    Ajai R. Singh

    2010-01-01

    Full Text Available This theme monograph is called Psychopharmacology Today. It has some notable contributions on issues in psychopharmacology.MSM 2010 is dedicated to the fond memory of Dr V.N. Bagadia, who headed our Hon International Editorial Advisory Board. See Dedication, " Dr Bagadia, Sir, is no more"(p3.Thomas L. Schwartz, M.D. Associate Professor of Psychiatry, SUNY Upstate Medical University, Syracuse, NY, USA writes an editorial on, "Psychopharmacology today: where are we and where do we go from here?"(p6.Ajai R. Singh, MD. Editor, Mens Sana Monographs, writes the second editorial on, "Modern medicine: towards prevention, cure, well-being and longevity"(p17.Sannidhya Varma, Himanshu Sareen and J.K. Trivedi from CSM Medical University, Lucknow, India, write on, "The Geriatric Population and Psychiatric Medication"(p30.Amresh Shrivastava from The University of Western Ontario, Department of Psychiatry and Megan E. Johnston from University of Toronto, Department of Psychology, write on, "Weight Gain in Psychiatric Treatment: Risks, Implications, and Strategies for Prevention and Management"(p53.Avinash De Sousa, M.D. Consultant Psychiatrist& Psychotherapist, Mumbai, writes on, "The Pharmacotherapy of Alcohol Dependence: A State of the Art Review"(p69. Late B. M. Tripathi, M.D. Professor, Department of Psychiatry and National Drug Dependence and Treatment Center, All India Institute of Medical Sciences, and Pradipta Majumder, MBBS, Resident, Department of Psychiatry, All India Institute of Medical Sciences, New Delhi, write on, "Lactating Mother and Psychotropic Drugs"(p83.K.S. Latha PhD. Associate Professor, Department of Psychiatry, KMC Hospital, Manipal University, writes on, "The Noncompliant Patient in Psychiatry: The Case For and Against Covert/Surreptitious Medication"(p96. Neha Khetrapal, [M.A. Cognitive Science], Centre of Excellence "Cognitive Interaction Technology" (CITEC And Faculty of Psychology& Sport Sciences, University of Bielefeld, Germany

  17. Botulinum toxin: yesterday, today, tomorrow

    Directory of Open Access Journals (Sweden)

    A. R. Artemenko

    2013-01-01

    Full Text Available Botulinum toxin (BoNT is a bacterial neurotoxin presented with seven serotypes that inhibit neurotransmitter release from nerve endings. The serotypes of BoNT are antigenically dissimilar, act via different, but interconnected mechanisms, and are not interchangeable. The activity of BoNT is associated with impaired neuroexocytosis occurring in several steps: from the binding of BoNT to its specific receptor on the axon terminal membrane to the proteolytic enzymatic cleavage of SNARE substrate. The effect of BoNT is considered to be restricted to the peripheral nervous system, but when given in particularly high doses, it has been recently shown to affect individual brain structures. In addition, by modulating peripheral afferentation, BoNT may influence the excitability of central neuronal structures at both spinal and cortical levels. Only BoNT serotypes A and B are used in clinical practice and aesthetic medicine. The type A has gained the widest acceptance as a therapeutic agent for more than 100 abnormalities manifesting themselves as muscular hyperactivity, hyperfunction of endocrine gland, and chronic pain. The effect of BoNT preparations shows itself 2-5 days after injection, lasts 3 months or more, and gradually decreases with as a result of pharmacokinetic and intracellular reparative processes. Biotechnology advances and potentialities allow purposefully modification of the protein molecular structure of BoNT, which expands the use and efficiency of performed therapy with neurotoxins. Recombinant technologies provide a combination of major therapeutic properties of each used BoNT serotype and expand indications for recombinant chimeric toxins.

  18. A Comparative Study of the Application of Electronic Data Interchange and Internet Technology to Business Process Reengineering

    Institute of Scientific and Technical Information of China (English)

    Hamid Reza Ahadi

    2004-01-01

    This study investigates the role of information technology in business process reengineering (BPR) implementation.To increase the prospects of successful BPR implementation,the role of information technology in BPR should be thoroughly investigated to find the logical relationships between information technology and BPR.This study used a survey methodology to gather information from 72 BPR programs.The results show that different information technologies,such as those examined in this study,electronic data interchange (EDI) and Internet,provide different capabilities and can be useful in different ways and for different purposes.Lack of attention to these relationships may be due to the unacceptable high implementation failure rate in the previous BPR efforts.

  19. ELECTRONIC FUNDS TRANSFER IN MONEY LAUNDERING CRIME: REGULATION NEEDED IN RESPONSE TO MEETING OF TECHNOLOGY AND CRIME IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Go Lisanawati

    2010-12-01

    Full Text Available Advancements in information technology have affected modern society in numerous areas, including communication, education, commerce, and so on. These advancements have brought incredible benefits; they have also provided opportunities and motivation for various forms of crime. Information technology has also made crime highly profitable. Among the many types of criminal activities, modern technology has allowed money laundering to become an online crime. This new type of crime has raised some legal questions about the capability of national and international regulations in relation to current and upcoming issues. These include finding electronic funds transfer records after the fact, and determining money laundering activity that includes electronic funds transfer. Although Indonesia is an integral member of a community concerned with the interaction between technology and money laundering, it has not provided regulations to deal with the current and upcoming issues involving the crime of electronic money laundering. The increase in the amount of crime indicates the following series of techniques and mechanisms that had been detected in relation to money laundering activity. This research will examine current issues under the light of Indonesian regulations, and will put forward some proposals to close the legal vacuum.

  20. High-pitch metal-on-glass technology for pad pitch adaptation between detectors and readout electronics

    CERN Document Server

    Ullán, Miguel; Campabadal, Francesca; Fleta, Celeste; Garcia, Carmen; Gonzalez, Francisco; Bernabeu, Jose

    2004-01-01

    Modern high-energy physics and astrophysics strip detectors have increased channel density to levels at which their connection with readout electronics has become very complex due to high pad pitch. Also, direct wire bonding is prevented by the fact that typically detector's pad pitch and electronics' pad pitch do not match. A high- pitch metal-on-glass technology is presented, that allows pad pitch adaptation between detectors and readout electronics. It consists of high-density metal lines on top of an insulating glass substrate. A photoresist layer is deposited covering the metal tracks for passivation and protection The technology is tested for conductivity, bondability, bonding pull force, peel off, and radiation hardness, and it is an established technology in the clean room of the CNM Institute in Barcelona. This technology has been chosen by the ATLAS Collaboration for the pad pitch adapters (PPA) of the SCT Endcap Modules, by a Compton camera project, and by other HEP groups for interconnection betwe...

  1. 77 FR 72985 - Health Information Technology: Revisions to the 2014 Edition Electronic Health Record...

    Science.gov (United States)

    2012-12-07

    ... Electronic Health Record Certification Criteria; and Medicare and Medicaid Programs; Revisions to the Electronic Health Record Incentive Program AGENCY: Office of the National Coordinator for Health Information... Electronic Health Record (EHR) Incentive Programs We described the legislative basis for the Medicare and...

  2. Playing with Technology: Mother-Toddler Interaction Scores Lower during Play with Electronic Toys

    Science.gov (United States)

    Wooldridge, Michaela B.; Shapka, Jennifer

    2012-01-01

    To investigate play with electronic toys (battery-operated or digital), 25 mother-toddler (16-24 months old) dyads were videotaped in their homes playing with sets of age-appropriate electronic and non-electronic toys for approximately 10 min each. Parent-child interactions were coded from recorded segments of both of the play conditions using the…

  3. Advanced electron-beam pattern generation technology for 180-nm masks

    Science.gov (United States)

    Abboud, Frank E.; Sauer, Charles A.; Wang, William; Vernon, Matthew; Prior, Richard; Pearce-Percy, Henry T.; Cole, Damon M.; Mankos, Marian

    1997-02-01

    Optical lithography will be the dominant technique used for 180 nm generation production devices. With a reduced feature size on the wafer, 4X optical reduction, optical proximity correction (OPC), and phase shift lithography techniques, mask-related errors become even more critical to wafer yield. In addition, small feature sizes and lithography enhancement techniques require finer edge resolution. Clearly, new patten generation tools are needed for this generation of maskmaking requirements. Multipass gray (MPG) writing strategy was introduced with the MEBESR 4500S. The ability to deliver a 4X improvement in dose while improving throughput is a significant advantage over previous MEBES systems. Since MPG is used in conjunction with offset scan voting, reduction in butting of over 50% has been demonstrated with MPG. Higher doses are now possible with use of a multipass writing strategy and a brighter source. As a result, resists with higher contrast and process robustness can be used. A significant improvement in uniformity is noted with the new process, an essential step needed in meeting 180 nm requirements. Dry etch is essential to meet these new requirements and with sufficient process margin to be manufacturable. This paper describes the key electron-beam pattern generation technology necessary to meet the requirement of 180 nm masks, including a high dose field- emission gun and column capable of delivering 800 A/cm2; complete dynamic beam correction; a digital stage servo to provide stable, reproducible stage control under high acceleration conditions; a high speed data path to support 320 MHz beam blanking and a 10 nm data address. This paper also examines the improvements made to the MEBES platform and documents the resulting improvements and compares these results to the requirements for 180 nm masks.

  4. The responsible by the radiological safety in the industry. Among the labour environment and the today technology; El responsable por la seguridad radiologica en la industria. Entre el ambiente laboral y la tecnologia de hoy

    Energy Technology Data Exchange (ETDEWEB)

    Adrian T, W. [Autoridad Regulatoria Nuclear, Subgerencia Control de Instalaciones Radiactivas Clase II y III, Av. del Libertador 8250, Ciudad de Buenos Aires (C1429BNP) (Argentina)]. e-mail: wtruppa@sede.arn.gov.ar

    2006-07-01

    Inside the industrial applications of the sealed radioactive sources, there are clearly exist two defined branches for which these materials are used: radioactive sources used in fixed equipment and in mobile ones. These devices are used in a countless of applications and every time with more advanced technological systems. This requires a permanent improvement inside the training of the responsible one and in turn it introduces an obligatory change to other intervention groups during the useful life of the device. The accident risks to those that are associate the use of these equipment, they are errors during the operation, undue use, maintenance carried out by personal without knowledge, flaws of human type or negligence and incidents happened during the transport. All these 'risks' its are surrounded of different groups of factors that influence during the safe use of the radioactive material, inside the installation of one way or another. Then it stands out the importance of implanting aspects of 'Safety Culture', evaluations of aptitude of the responsible one for the radiological safety, introduction of improvements in aspects of quality and communication of risks, chord to what indicates the normative of the Argentine Republic and the international requirements, which will be approached in the present work. (Author)

  5. Design and implementation of a fs-resolved transmission electron microscope based on thermionic gun technology

    Science.gov (United States)

    Piazza, L.; Masiel, D. J.; LaGrange, T.; Reed, B. W.; Barwick, B.; Carbone, Fabrizio

    2013-09-01

    In this paper, the design and implementation of a femtosecond-resolved ultrafast transmission electron microscope is presented, based on a thermionic gun geometry. Utilizing an additional magnetic lens between the electron acceleration and the nominal condenser lens system, a larger percentage of the electrons created at the cathode are delivered to the specimen without degrading temporal, spatial and energy resolution significantly, while at the same time maintaining the femtosecond temporal resolution. Using the photon-induced near field electron microscopy effect (PINEM) on silver nanowires the cross-correlation between the light and electron pulses was measured, showing the impact of the gun settings and initiating laser pulse duration on the electron bunch properties. Tuneable electron pulses between 300 fs and several ps can be obtained, and an overall energy resolution around 1 eV was achieved.

  6. Using technology to teach technology: design and evaluation of bilingual online physician education about electronic medical records.

    Science.gov (United States)

    Edmonson, Sarah R; Esquivel, Adol; Mokkarala, Pallavi; Johnson, Craig W; Phelps, Cynthia L

    2005-01-01

    The "EMR Tutorial" is designed to be a bilingual online physician education environment about electronic medical records. After iterative assessment and redesign, the tutorial was tested in two groups: U.S. physicians and Mexican medical students. Split-plot ANOVA revealed significantly different pre-test scores in the two groups, significant cognitive gains for the two groups overall, and no significant difference in the gains made by the two groups. Users rated the module positively on a satisfaction questionnaire.

  7. Electronic Document Management Systems: Where Are They Today?

    Science.gov (United States)

    Koulopoulos, Thomas M.; Frappaolo, Carl

    1993-01-01

    Discusses developments in document management systems based on a survey of over 400 corporations and government agencies. Text retrieval and imaging markets, architecture and integration, purchasing plans, and vendor market leaders are covered. Five graphs present data on user preferences for improvements. A sidebar article reviews the development…

  8. Use of biomass today; Biomassenutzung heute

    Energy Technology Data Exchange (ETDEWEB)

    Schimpf, H. [Landesanstalt fuer Landwirtschaft und Gartenbau Sachsen-Anhalt/Koordinierungsstelle Nachwachsende Rohstoffe, Bernburg (Germany)

    2005-12-15

    Biomass is a much-mentioned alternative to fossil fuels today. The contribution investigates its current contribution to power supply, and the situation in the state of Sachsen-Anhalt in particular. (orig.)

  9. Women in Domestic Work: Yesterday and Today.

    Science.gov (United States)

    Grossman, Allyson Sherman

    1980-01-01

    Provides a historical overview of private household workers and builds a demographic profile of today's domestic workers. Discusses changes in women's employment which may upgrade the status of household workers. (SK)

  10. Market structure, industrial organisation and technological development: the case of the Japanese electronics-based nc-machine tool industry.

    OpenAIRE

    Watanabe, S

    1983-01-01

    ILO pub-WEP pub. Working paper on the impact of market structure and business organization on technological change in the automatic control machine tool industry in Japan - based on a 1982 sample survey of 40 industrial enterprises, discusses research and development trends, demand, production, subcontracting, competition, etc.; investigates the impact of electronics Innovation on small scale industry, the international division of labour and on developing countries. Bibliography and graphs.

  11. Structure and machinability of thin-walled parts made of titanium alloy powder using electron beam melting technology

    Science.gov (United States)

    Isaev, A.; Grechishnikov, V.; Kozochkin, M.; Volosova, M.; Petuhov, Yu; Peretyagin, P.

    2016-04-01

    The present study aims at study of structure and properties of raw and thermal treated titanium-based powder material used to produce the thin-walled components by electron beam melting technology. Producing the end product means also studying the finishing cutting process. Examining the quality of end product in terms of geometric tolerance and thin walls thickness stability consists of control the surface roughness is also included in this study.

  12. Life sciences today and tomorrow: emerging biotechnologies.

    Science.gov (United States)

    Williamson, E Diane

    2016-07-03

    The purpose of this review is to survey current, emerging and predicted future biotechnologies which are impacting, or are likely to impact in the future on the life sciences, with a projection for the coming 20 years. This review is intended to discuss current and future technical strategies, and to explore areas of potential growth during the foreseeable future. Information technology approaches have been employed to gather and collate data. Twelve broad categories of biotechnology have been identified which are currently impacting the life sciences and will continue to do so. In some cases, technology areas are being pushed forward by the requirement to deal with contemporary questions such as the need to address the emergence of anti-microbial resistance. In other cases, the biotechnology application is made feasible by advances in allied fields in biophysics (e.g. biosensing) and biochemistry (e.g. bio-imaging). In all cases, the biotechnologies are underpinned by the rapidly advancing fields of information systems, electronic communications and the World Wide Web together with developments in computing power and the capacity to handle extensive biological data. A rationale and narrative is given for the identification of each technology as a growth area. These technologies have been categorized by major applications, and are discussed further. This review highlights: Biotechnology has far-reaching applications which impinge on every aspect of human existence. The applications of biotechnology are currently wide ranging and will become even more diverse in the future. Access to supercomputing facilities and the ability to manipulate large, complex biological datasets, will significantly enhance knowledge and biotechnological development.

  13. Las tecnologías de información y comunicación y sus usos hoy / Uses of information and communication technologies today Constants, ponderings and hypothesis

    Directory of Open Access Journals (Sweden)

    Françoise Paquienséguy

    2007-01-01

    Full Text Available El objetivo de este artículo es reflexionar sobre la formación de los usos sociales desde una doble perspectiva: las características de las tecnologías de información y de la comunicación que se desarrollan hoy, y el sistema de oferta al que pertenecen. Así, varios cambios visibles, tangibles o en construcción cuestionan la formación de los usos y su estudio en referencia a la sociología de los usos. En un primer tiempo mostraremos, precisamente, que la oferta ha cambiado de manera profunda al pasar las NTIC de los años 1980 a las TIC numéricas y que, en segundo lugar, esta mutación se opone a la definición de los usos sociales y sus condiciones de formación en referencia a las NTIC. En efecto, pueden despejarse ya cuatro características de las TICN : la polivalencia, la apertura, la formación de un dispositivo y la pérdida de la función dominante. El trabajo de investigación sobre las mutaciones de la formación de los usos mismos está aquí esbozada solamente desde un punto de vista teórico a fin de demostrar todo el interés que habría por estudiar estas mutaciones; porque también se trata de interrogarse sobre la evolución de las problemáticas de las Ciencias de la Comunicación en este principio del siglo XXI. The aim of this article is to think about social uses development from a double perspective: nowadays information and communication features; and the supply system they belong to. Said that, there are plenty visible, tangible and growing changes that are pondering on the development of those uses and the study referred to the sociology of those uses. First of all, we’ll expose how that technology supply has suffered a deep change going through an evolution from 1980’s NTIC to numerical TIC. Second, this mutation is opposed to social uses definition and their development conditions, according to NTIC. Actually, we can recognize four clear NTIC features: polyvalence, liberalization, a device creation and

  14. Microgravity experiments on boiling and applications: research activity of advanced high heat flux cooling technology for electronic devices in Japan.

    Science.gov (United States)

    Suzuki, Koichi; Kawamura, Hiroshi

    2004-11-01

    Research and development on advanced high heat flux cooling technology for electronic devices has been carried out as the Project of Fundamental Technology Development for Energy Conservation, promoted by the New Energy and Industrial Technology Development Organization of Japan (NEDO). Based on the microgravity experiments on boiling heat transfer, the following useful results have obtained for the cooling of electronic devices. In subcooled flow boiling in a small channel, heat flux increases considerably more than the ordinary critical heat flux with microbubble emission in transition boiling, and dry out of the heating surface is disturbed. Successful enhancement of heat transfer is achieved by a capillary effect from grooved surface dual subchannels on the liquid supply. The critical heat flux increases 30-40 percent more than for ordinary subchannels. A self-wetting mechanism has been proposed, following investigation of bubble behavior in pool boiling of binary mixtures under microgravity. Ideas and a new concept have been proposed for the design of future cooling system in power electronics.

  15. MO-H-19A-03: Patient Specific Bolus with 3D Printing Technology for Electron Radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Zou, W; Swann, B; Siderits, R; McKenna, M; Khan, A; Yue, N; Zhang, M [Rutgers University, New Brunswick, NJ (United States); Fisher, T [Memorial Medical Center, Modesto, CA (United States)

    2014-06-15

    Purpose: Bolus is widely used in electron radiotherapy to achieve desired dose distribution. 3D printing technologies provide clinicians with easy access to fabricate patient specific bolus accommodating patient body surface irregularities and tissue inhomogeneity. This study presents the design and the clinical workflow of 3D printed bolus for patient electron therapy in our clinic. Methods: Patient simulation CT images free of bolus were exported from treatment planning system (TPS) to an in-house developed software package. Bolus with known material properties was designed in the software package and then exported back to the TPS as a structure. Dose calculation was carried out to examine the coverage of the target. After satisfying dose distribution was achieved, the bolus structure was transferred in Standard Tessellation Language (STL) file format for the 3D printer to generate the machine codes for printing. Upon receiving printed bolus, a quick quality assurance was performed with patient resimulated with bolus in place to verify the bolus dosimetric property before treatment started. Results: A patient specific bolus for electron radiotherapy was designed and fabricated in Form 1 3D printer with methacrylate photopolymer resin. Satisfying dose distribution was achieved in patient with bolus setup. Treatment was successfully finished for one patient with the 3D printed bolus. Conclusion: The electron bolus fabrication with 3D printing technology was successfully implemented in clinic practice.

  16. Low-noise design issues for analog front-end electronics in 130 nm and 90 nm CMOS technologies

    CERN Document Server

    Manghisoni, M; Re, V; Speziali, V; Traversi, G

    2007-01-01

    Deep sub-micron CMOS technologies provide wellestablished solutions to the implementation of low-noise front-end electronics in various detector applications. The IC designers’ effort is presently shifting to 130 nm CMOS technologies, or even to the next technology node, to implement readout integrated circuits for silicon strip and pixel detectors, in view of future HEP applications. In this work the results of noise measurements carried out on CMOS devices in 130 nm and 90 nm commercial processes are presented. The behavior of the 1/f and white noise terms is studied as a function of the device polarity and of the gate length and width. The study is focused on low current density applications where devices are biased in weak or moderate inversion. Data obtained from the measurements provide a powerful tool to establish design criteria in nanoscale CMOS processes for detector front-ends in LHC upgrades.

  17. Animated Pedagogical Agents: A Review of Agent Technology Software in Electronic Learning Environments

    Science.gov (United States)

    Govindasamy, Malliga K.

    2014-01-01

    Agent technology has become one of the dynamic and most interesting areas of computer science in recent years. The dynamism of this technology has resulted in computer generated characters, known as pedagogical agent, entering the digital learning environments in increasing numbers. Commonly deployed in implementing tutoring strategies, these…

  18. 45 CFR 170.210 - Standards for health information technology to protect electronic health information created...

    Science.gov (United States)

    2010-10-01

    ... information—(1) General. Any encryption algorithm identified by the National Institute of Standards and Technology (NIST) as an approved security function in Annex A of the Federal Information Processing Standards... 45 Public Welfare 1 2010-10-01 2010-10-01 false Standards for health information technology...

  19. Factors Influencing Electronic Business Technologies Adoption and Use by Small and Medium Scale Enterprises (SMES in a Nigerian Municipality

    Directory of Open Access Journals (Sweden)

    Wole Olatokun

    2011-12-01

    Full Text Available This study examined the adoption of e-business technologies by SMEs in Ibadan a metropolitan city in South West Nigeria. It aimed at finding out the factors that promote and inhibit the adoption of e-business technologies, the kinds of e-business technologies adopted and used and their extent of use. It also identified the challenges faced by SMEs with regard to e-business technologies use. Descriptive survey research design was adopted. Data were collected with structured questionnaires administered among sixty SMEs (30 adopters and 30 non-adopters. Four hypotheses were tested at 0.05 level of significance. Data were analyzed using frequency and percentage distributions, t-test and multiple regression. Results showed that majority of the firms were smaller firms with 0-9 employees and not less than 1-5 years of establishment. The respondents cited perceived benefits as the major factor for adopting e-business technologies in their firms while 83.4% of non-adopters agreed that low capital base was the major reason inhibiting them from adoption. Hundred percent of the firms each have adopted internet technology and electronic mail which are daily used by all the firms. The major service provided with the use of these technologies was e-mail to communicate with customers and suppliers. On the benefit and challenges of e-business, all the organizations affirmed that e-business have benefited them in the sharing and exchange of information and improving market share. About 96.7% of them affirmed inadequate technical manpower as the major challenge. Further results revealed that the age of the SMEs had significant relationship on the adoption of e-business while size had no significant relationship. Independent variables jointly correlated significantly with the adoption of electronic business (R=0.162 and they contributed (22% to the variance of the dependent variables. Their significant contributions were as follows: perceived benefit (β=0.568, p

  20. A Low Cost, Electronically Scanned Array (ESA) Antenna Technology for Aviation Hazard Detection and Avoidance Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed project will investigate the feasibility of utilizing ThinKom's low cost electronically scanned array (ESA) antenna concepts to enable affordable...

  1. TOOLS FOR CONSUMER RIGHTS PROTECTION IN THE PREDICTION OF ELECTRONIC VIRTUAL MARKET AND TECHNOLOGICAL CHANGES

    National Research Council Canada - National Science Library

    Mikulás Gangur; Miroslav Plevný

    2014-01-01

    .... Both the operator and the electronic market participant can be considered consumers of this particular market with reference to the requirements for the accuracy of its outputs but also for the market liquidity...

  2. Passion in today's health care leaders.

    Science.gov (United States)

    Piper, Llewellyn E

    2005-01-01

    Passion in today's health care leaders is essential as health care organizations face increasing demands for survival. Leaders in health care have been educated, selected, promoted, and retained based on their analytical and creativity skills. Today's health care leaders must also have emotional intelligence. Emotional intelligence is primal for passion. Emotional intelligence, which leads to passion, is crucial to the survivability of today's health care organizations. In order for health care organizations to go from good to great, the leader must inspire followers through passion. This article encourages health care leaders to gain awareness of emotional intelligence and to use emotional intelligence as part of their leadership to inspire passion. Through passion, leaders and followers become more motivated to accomplish the health care mission of serving others.

  3. Local and Global Mechanical Behavior and Microstructure of Ti6Al4V Parts Built Using Electron Beam Melting Technology

    Science.gov (United States)

    Ladani, Leila

    2015-09-01

    Laser and electron beam melting are prime technologies in metallic powder bed additive manufacturing in which parts are built layer by layer using high energy source. The technology is at a level where each layer can be as thin as 50 µm. Melting and solidification of each powder layer is typically accompanied by some subsurface melting to assure adherence and fusion of layers. In addition to anisotropic mechanical behavior of material caused by layering phenomenon, it is expected that the local mechanical behavior and microstructure vary throughout each build. In this manuscript, local and global mechanical behavior of Ti6Al4V parts produced using electron beam melting technology is investigated using bulk scale mechanical testing and nanoindentation. Parts fabricated in different build orientation were tested at different strain rates at a large scale. The experiment showed that strength is minimal perpendicular to the build plate. Additionally, material exhibited different local mechanical properties relative to distance from base plate. Investigation of the microstructure indicated very distinguished variations in the grain size and alpha and beta phase formation of material in different locations of part relative to build plate. Strength reduction in perpendicular direction is examined and explained through understanding of the microstructure and plastic deformation mechanism in α phase and prior β grains.

  4. Film Presentation: Projekt Zukunft/Tomorrow Today

    CERN Multimedia

    Carolyn Lee

    2010-01-01

    Projekt Zukunft/Tomorrow Today, by Deutsche Welle (2009)   Deutsche Welle TV’s weekly science journal explores the LHC at CERN with host Ingolf Baur. Please note that we will show both the German and English versions of this broadcast. Each episode is about 27 minutes long. Projekt Zukunft/Tomorrow Today will be presented on Friday, 29 October from 13:00 to 14:00 in the Main Auditorium Language: German version followed by the English version      

  5. Digital planetariums as virtual museums for discovering today's science

    CERN Document Server

    Guyot, Walter; Toussaint, Jacques

    2013-01-01

    Our study's concern is about how to enlarge the scope of the virtual museum concept from the mediation activities as they are carried out in today's digital planetariums to training activities dedicated to the public. We assume that these educational and cultural tools must be regarded as real immersive virtual environments and therefore can provide visitors with a new technological framing directly connected with a scientific field in the making, cosmography, in its production environment. One of our goals is to make visitors construct their own knowledge based directly on ongoing research data.

  6. A computationally assisted spectroscopic technique to measure secondary electron emission coefficients in technological rf plasmas

    Science.gov (United States)

    Berger, Birk; Schulze, Julian; Daksha, Manaswi; Schuengel, Edmund; Koepke, Mark; Korolov, Ihor; Derzsi, Aranka; Donko, Zoltan

    2016-09-01

    A Computationally Assisted Spectroscopic Technique to measure secondary electron emission coefficients (y-CAST) in capacitive rf plasmas is proposed. This non-intrusive, sensitive diagnostic is based on a combination of Phase Resolved Optical Emission Spectroscopy and PIC simulations. Under most conditions in electropositive plasmas the spatio-temporally resolved electron-impact excitation rate features two distinct maxima adjacent to each electrode at different times within one rf period. One maximum is the consequence of an energy gain of the electrons due to sheath expansion. The second maximum is produced by electrons accelerated towards the plasma bulk by the sheath electric field at the time of maximum voltage drop across the sheath. Due to the different excitation mechanisms the ratio of the intensities of these maxima is very sensitive to y, which allows for its determination via comparing the experimentally measured excitation profiles with corresponding simulation data obtained with various y-coefficients. This diagnostic is tested here in a geometrically symmetric reactor, for stainless steel electrodes and argon gas. An effective secondary electron emission coefficient of y = 0.067+-0.010 is obtained, which is in excellent agreement with previous experimental results.

  7. Tools for Consumer Rights Protection in the Prediction of Electronic Virtual Market and Technological Changes

    Directory of Open Access Journals (Sweden)

    Mikuláš Gangur

    2014-05-01

    Full Text Available Electronic virtual markets can serve as an alternative tool for collecting information that is spread among numerous experts. This is the principal market functionality from the operators’ point of view. On the other hand it is profits that are the main interest of the market participants. What they expect from the market is liquidity as high as possible and the opportunity for unrestricted trading. Both the operator and the electronic market participant can be considered consumers of this particular market with reference to the requirements for the accuracy of its outputs but also for the market liquidity. Both the above mentioned groups of consumers (the operators and the participants themselves expect protection of their specific consumer rights, i.e. securing the two above mentioned functionalities of the market. These functionalities of the electronic market are, however, influenced by many factors, among others by participants’ activity. The article deals with the motivation tools that may improve the quality of the prediction market. In the prediction electronic virtual market there may be situations in which the commonly used tools for increasing business activities described in the published literature are not significantly effective. For such situations we suggest a new type of motivation incentive consisting in penalizing the individual market participants whose funds are not placed in the market. The functionality of the proposed motivation incentive is presented on the example of the existing data gained from the electronic virtual prediction market which is actively operated.

  8. Electronic Submersible Pump (ESP) Technology and Limitations with Respect to Geothermal Systems (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-09-01

    The current state of geothermal technology has limitations that hinder the expansion of utility scale power. One limitation that has been discussed by the current industry is the limitation of Electric Submersible Pump (ESP) technology. With the exception of a few geothermal fields artificial lift technology is dominated by line shaft pump (LSP) technology. LSP's utilize a pump near or below reservoir depth, which is attached to a power shaft that is attached to a motor above ground. The primary difference between an LSP and an ESP is that an ESP motor is attached directly to the pump which eliminates the power shaft. This configuration requires that the motor is submersed in the geothermal resource. ESP technology is widely used in oil production. However, the operating conditions in an oil field vary significantly from a geothermal system. One of the most notable differences when discussing artificial lift is that geothermal systems operate at significantly higher flow rates and with the potential addition of Enhanced Geothermal Systems (EGS) even greater depths. The depths and flow rates associated with geothermal systems require extreme horsepower ratings. Geothermal systems also operate in a variety of conditions including but not limited to; high temperature, high salinity, high concentrations of total dissolved solids (TDS), and non-condensable gases.

  9. Nanosecond pulse-width electron diode based on dielectric wall accelerator technology

    Science.gov (United States)

    Zhao, Quantang; Zhang, Z. M.; Yuan, P.; Cao, S. C.; Shen, X. K.; Jing, Y.; Yu, C. S.; Li, Z. P.; Liu, M.; Xiao, R. Q.; Zong, Y.; Wang, Y. R.; Zhao, H. W.

    2013-11-01

    An electron diode using a short section of dielectric wall accelerator (DWA) has been under development at the Institute of Modern Physics (IMP), Chinese Academy of Sciences. Tests have been carried out with spark gap switches triggered by lasers. The stack voltage efficiency of a four-layer of Blumleins reached about 60-70% with gas filled spark gap switching. The generated pulse voltage of peak amplitude of 23 kV and pulse width of 5 ns is used to extract and accelerate an electron beam of 320 mA, measured by a fast current transformer. A nanosecond pulse width electron diode was achieved successfully. Furthermore, the principle of a DWA is well proven and the development details and discussions are presented in this article.

  10. Evaluation of some commercial grade polymers as possible dosimeters for technological irradiations in electron accelerators

    CERN Document Server

    Bryl-Sandelewska, T

    2002-01-01

    Dosimetric properties of two kinds of clear polymethylmethacrylate (PMMA)and one kind of polystyrene (PS) sheets in technological accelerator irradiations, are presented. Absorbance of the sheets and its dependence on the dose have been measured at a suitable wavelength using a UV/VIS spectrophotometer. Both kind PMMA can be used for technological dose measurements but each of them in the different range of the doses (approx 3 to approx 30 kGy and approx 30 to above 200 kGy). Heating the samples after irradiation accelerates the stabilization of the absorbance, which change slowly during the storage of the samples if not heated.Absorbance of clear PS sheets decreases very much during the storage after irradiation, and heating of the samples does not accelerate the stabilization of the value. It can be said that the Ps investigated is not suitable for technological dose measurements in accelerator i radiations.

  11. Use and User Perception of Electronic Information Resources: A Case Study of Siva Institute of Frontier Technology, India

    Directory of Open Access Journals (Sweden)

    Velmurugan Chandran

    2013-12-01

    Full Text Available The present study aims to explore the use and user perception of electronic resources in Siva Institute of Frontier Technology, India. A total number of 123 users were taken into account for the study through a questionnaire-based survey method. A well-structured questionnaire was designed and distributed to the selected 200 students and staff members. 123 copies of the questionnaires were returned dully filled in and the overall response rate was 61.50 percent. The questionnaire contained both open- and close-ended questions. The collected data were classified, analyzed, and tabulated by using simple statistical methods. This study covers the impact of electronic resources on students and faculty in their academic pursuit.

  12. An Introduction to Flight Software Development: FSW Today, FSW 2010

    Science.gov (United States)

    Gouvela, John

    2004-01-01

    Experience and knowledge gained from ongoing maintenance of Space Shuttle Flight Software and new development projects including Cockpit Avionics Upgrade are applied to projected needs of the National Space Exploration Vision through Spiral 2. Lessons learned from these current activities are applied to create a sustainable, reliable model for development of critical software to support Project Constellation. This presentation introduces the technologies, methodologies, and infrastructure needed to produce and sustain high quality software. It will propose what is needed to support a Vision for Space Exploration that places demands on the innovation and productivity needed to support future space exploration. The technologies in use today within FSW development include tools that provide requirements tracking, integrated change management, modeling and simulation software. Specific challenges that have been met include the introduction and integration of Commercial Off the Shelf (COTS) Real Time Operating System for critical functions. Though technology prediction has proved to be imprecise, Project Constellation requirements will need continued integration of new technology with evolving methodologies and changing project infrastructure. Targets for continued technology investment are integrated health monitoring and management, self healing software, standard payload interfaces, autonomous operation, and improvements in training. Emulation of the target hardware will also allow significant streamlining of development and testing. The methodologies in use today for FSW development are object oriented UML design, iterative development using independent components, as well as rapid prototyping . In addition, Lean Six Sigma and CMMI play a critical role in the quality and efficiency of the workforce processes. Over the next six years, we expect these methodologies to merge with other improvements into a consolidated office culture with all processes being guided by

  13. An Introduction to Flight Software Development: FSW Today, FSW 2010

    Science.gov (United States)

    Gouvela, John

    2004-01-01

    Experience and knowledge gained from ongoing maintenance of Space Shuttle Flight Software and new development projects including Cockpit Avionics Upgrade are applied to projected needs of the National Space Exploration Vision through Spiral 2. Lessons learned from these current activities are applied to create a sustainable, reliable model for development of critical software to support Project Constellation. This presentation introduces the technologies, methodologies, and infrastructure needed to produce and sustain high quality software. It will propose what is needed to support a Vision for Space Exploration that places demands on the innovation and productivity needed to support future space exploration. The technologies in use today within FSW development include tools that provide requirements tracking, integrated change management, modeling and simulation software. Specific challenges that have been met include the introduction and integration of Commercial Off the Shelf (COTS) Real Time Operating System for critical functions. Though technology prediction has proved to be imprecise, Project Constellation requirements will need continued integration of new technology with evolving methodologies and changing project infrastructure. Targets for continued technology investment are integrated health monitoring and management, self healing software, standard payload interfaces, autonomous operation, and improvements in training. Emulation of the target hardware will also allow significant streamlining of development and testing. The methodologies in use today for FSW development are object oriented UML design, iterative development using independent components, as well as rapid prototyping . In addition, Lean Six Sigma and CMMI play a critical role in the quality and efficiency of the workforce processes. Over the next six years, we expect these methodologies to merge with other improvements into a consolidated office culture with all processes being guided by

  14. Electronic palatal rugae impression: a potentially relevant technology in personal identification

    Directory of Open Access Journals (Sweden)

    Fabrizio Guerra

    2016-06-01

    Full Text Available Forensic medicine is now able to identify people through lots of different systems. Actually, fingerprints identification is the mostused identification method. To avoid identifying, many people alter or erase their fingerprints through chemical and / or abrasivesystems. The study of palatal rugae (palatoscopy is an identification technique today accepted by the international scientificcommunity as an alternative, safe and effective identification system, because of their characteristic feature of immutability andindividuality. Currently, the most used procedure is dental impression through plaster casts or photographs. The difficulties in therecording and cast’s storage limited the use of this identification system in comparison with others techniques. In order to improvethe palatal rugae analysis system, we designed a software, connected to a camera device that allows to acquire the palatal impression,to easily identify the salient palatal features and to store them in a database. This would permit a fast, simple and economicrecognition method that could be used without the need of specific staff training and that could easily be integrated with the existingfingerprint identification systems.

  15. Hard electronics; Hard electronics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Hard material technologies were surveyed to establish the hard electronic technology which offers superior characteristics under hard operational or environmental conditions as compared with conventional Si devices. The following technologies were separately surveyed: (1) The device and integration technologies of wide gap hard semiconductors such as SiC, diamond and nitride, (2) The technology of hard semiconductor devices for vacuum micro- electronics technology, and (3) The technology of hard new material devices for oxides. The formation technology of oxide thin films made remarkable progress after discovery of oxide superconductor materials, resulting in development of an atomic layer growth method and mist deposition method. This leading research is expected to solve such issues difficult to be easily realized by current Si technology as high-power, high-frequency and low-loss devices in power electronics, high temperature-proof and radiation-proof devices in ultimate electronics, and high-speed and dense- integrated devices in information electronics. 432 refs., 136 figs., 15 tabs.

  16. Electronically Tunable Current-mode High-order Ladder Low-pass Filters Based on CMOS Technology

    Directory of Open Access Journals (Sweden)

    T. Kunto

    2015-12-01

    Full Text Available This paper describes the design of current mode low-pass ladder filters based on CMOS technology. The filters are derived from passive RLC ladder filter prototypes using new CMOS lossy and lossless integrators. The all-pole and Elliptic approximations are used in the proposed low-pass filter realizations. The proposed two types of filter can be electronically tuned between 10kHz and 100MHz through bias current from 0.03µA to 300µA. The proposed filters use 1.5 V power supply with 3 mW power consumption at 300 µA bias current. The proposed filters are resistorless, use grounded capacitors and are suitable for further integration. The total harmonic distortion (THD of the low-pass filters is less than 1% over the operating frequency range. PSPICE simulation results, obtained by using TSMC 0.18µm technology, confirm the presented theory.

  17. The feasibility of using 'bring your own device' (BYOD) technology for electronic data capture in multicentre medical audit and research.

    Science.gov (United States)

    Faulds, M C; Bauchmuller, K; Miller, D; Rosser, J H; Shuker, K; Wrench, I; Wilson, P; Mills, G H

    2016-01-01

    Large-scale audit and research projects demand robust, efficient systems for accurate data collection, handling and analysis. We utilised a multiplatform 'bring your own device' (BYOD) electronic data collection app to capture observational audit data on theatre efficiency across seven hospital Trusts in South Yorkshire in June-August 2013. None of the participating hospitals had a dedicated information governance policy for bring your own device. Data were collected by 17 investigators for 392 individual theatre lists, capturing 14,148 individual data points, 12, 852 (91%) of which were transmitted to a central database on the day of collection without any loss of data. BYOD technology enabled accurate collection of a large volume of secure data across multiple NHS organisations over a short period of time. Bring your own device technology provides a method for collecting real-time audit, research and quality improvement data within healthcare systems without compromising patient data protection.

  18. Nano-structure multilayer technology fabrication of high energy density capacitors for the power electronic building book

    Energy Technology Data Exchange (ETDEWEB)

    Barbee, T.W.; Johnson, G.W.; Wagner, A.V.

    1997-10-21

    Commercially available capacitors do not meet the specifications of the Power Electronic Building Block (PEBB) concept. We have applied our propriety nanostructure multilayer materials technology to the fabrication of high density capacitors designed to remove this impediment to PEBB progress. Our nanostructure multilayer capacitors will also be enabling technology in many industrial and military applications. Examples include transient suppression (snubber capacitors), resonant circuits, and DC filtering in PEBB modules. Additionally, weapon applications require compact energy storage for detonators and pulsed-power systems. Commercial applications run the gamut from computers to lighting to communications. Steady progress over the last five years has brought us to the threshold of commercial manufacturability. We have demonstrated a working dielectric energy density of > 11 J/cm3 in 20 nF devices designed for 1 kV operation.

  19. Exposure Potential and Health Impacts of Indium and Gallium, Metals Critical to Emerging Electronics and Energy Technologies.

    Science.gov (United States)

    White, Sarah Jane O; Shine, James P

    2016-12-01

    The rapid growth of new electronics and energy technologies requires the use of rare elements of the periodic table. For many of these elements, little is known about their environmental behavior or human health impacts. This is true for indium and gallium, two technology critical elements. Increased environmental concentrations of both indium and gallium create the potential for increased environmental exposure, though little is known about the extent of this exposure. Evidence is mounting that indium and gallium can have substantial toxicity, including in occupational settings where indium lung disease has been recognized as a potentially fatal disease caused by the inhalation of indium particles. This paper aims to review the basic chemistry, changing environmental concentrations, potential for human exposure, and known health effects of indium and gallium.

  20. What's Missing in Design Education Today?

    Science.gov (United States)

    Frascara, Jorge; Noel, Guillermina

    2012-01-01

    This article begins by describing a desirable design approach that is only practiced by a few designers today. This design approach is desirable because it responds to a society that suffers from a number of illnesses due to communications and artifacts that do not satisfy the needs of people. The article then proposes the kind of design education…

  1. Europa Heute: Filmbegleitheft (Europe Today: Film Manual).

    Science.gov (United States)

    Freudenstein, Reinhold; And Others

    This teacher's guide to the German promotional film "Europe Today", suitable for use in advanced courses, concentrates on linguistic preparation required for full appreciation. The film focuses on the role of European countries as participating members of the Common Market. The manual includes information on the German film industry, a…

  2. Education Today 2010: The OECD Perspective

    Science.gov (United States)

    OECD Publishing (NJ3), 2010

    2010-01-01

    What does the OECD have to say about the state of education today? What are the main OECD messages on early childhood education, teacher policies and tertiary education? What about student performance, educational spending and equity in education? OECD work on these important education topics and others have been brought together in a single…

  3. Education Today 2013: The OECD Perspective

    Science.gov (United States)

    OECD Publishing (NJ3), 2012

    2012-01-01

    What does the OECD have to say about the state of education today? What are the main OECD messages on early childhood education, teacher policies and tertiary education? What about student performance, educational spending and equity in education? OECD work on these important education topics and others have been brought together in a single…

  4. Using Today's Headlines for Teaching Gerontology

    Science.gov (United States)

    Haber, David

    2008-01-01

    It is a challenge to attract undergraduate students into the gerontology field. Many do not believe the aging field is exciting and at the cutting edge. Students, however, can be convinced of the timeliness, relevance, and excitement of the field by, literally, bringing up today's headlines in class. The author collected over 250 articles during…

  5. Using Today's Headlines for Teaching Gerontology

    Science.gov (United States)

    Haber, David

    2008-01-01

    It is a challenge to attract undergraduate students into the gerontology field. Many do not believe the aging field is exciting and at the cutting edge. Students, however, can be convinced of the timeliness, relevance, and excitement of the field by, literally, bringing up today's headlines in class. The author collected over 250 articles during…

  6. The Struggle for Existence: 1859 & Today

    Science.gov (United States)

    Walsh, Joseph A.

    2009-01-01

    The theory that natural selection is the key to adaptive evolution, and the reasoning for his conclusions, were Darwin's contributions to science. However, only half of Americans accept the fact of evolution as true (Gallup, 2008). Walsh contends that there are three reasons that students today find life's existential struggle less apparent.…

  7. After the Resistance: The Alamo Today

    Centers for Disease Control (CDC) Podcasts

    2014-09-23

    Byron Breedlove reads his essay After the Resistance: The Alamo Today about the Alamo and emerging disease resistance.  Created: 9/23/2014 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 10/20/2014.

  8. Recycling Today Makes for a Better Tomorrow.

    Science.gov (United States)

    Raze, Robert E., Jr.

    1992-01-01

    Today's children must be educated about solid waste management and recycling to reduce the amount of waste that goes into landfills. The article describes what can be recycled (newspapers, corrugated cardboard, paper, glass, aluminum, textiles, motor oil, organic wastes, appliances, steel cans, and plastics). It also lists student environment…

  9. Interviewing Techniques Used in Selected Organizations Today

    Science.gov (United States)

    Joyce, Marguerite P.

    2008-01-01

    Businesses continue to use the job interview as a final determinant of the applicant's good fit for the company and its culture. Today, many companies are hiring less and/or are taking longer to find just the right person with the right skills for the right job. If an applicant is asked to come for an interview, the general feeling is that the…

  10. Identity and Diversity in Today's World

    Science.gov (United States)

    Gee, James Paul

    2017-01-01

    This paper develops a thesis about identity and diversity. I first look at activity-based identities, identities like being a gardener, birder, citizen scientist or fan-fiction writer. These are freely chosen identities and they are proliferating at a great rate today thanks to participatory culture, the Maker Movement and digital and social…

  11. Applying Servant Leadership in Today's Schools

    Science.gov (United States)

    Culver, Mary K.

    2009-01-01

    This book illustrates how the ideal of servant leadership can be applied in your school today. With real-life scenarios, discussions, and self assessments, this book gives practical suggestions to help you develop into a caring and effective servant leader. There are 52 scenarios in this book, focusing on situations as varied as: (1) Dealing with…

  12. We, John Dewey's Audience of Today

    Science.gov (United States)

    da Cunha, Marcus Vinicius

    2016-01-01

    This article suggests that John Dewey's "Democracy and Education" does not describe education in an existing society, but it conveys a utopia, in the sense coined by Mannheim: utopian thought aims at instigating actions towards the transformation of reality, intending to attain a better world in the future. Today's readers of Dewey (his…

  13. Virtual Worlds Today: Gaming and Online Sociality.

    OpenAIRE

    Calleja, Gordon

    2008-01-01

    Gordon Calleja gives an historical overview about the history of Virtual Worlds. In his article “Virtual Worlds Today: Gaming and Online Sociality” he thus focuses on the problems that come with trying to define “virtual” and “Virtual Worlds” and gives an illustrative overview about various types of different so-called Virtual Worlds.

  14. Measuring Maturity of Use for Electronic Medical Records (EMRs) in British Columbia: The Physician Information Technology Office (PITO).

    Science.gov (United States)

    Rimmer, Carol; Hagens, Simon; Baldwin, Anne; Anderson, Carol J

    2014-01-01

    This article examines British Columbia (BC)'s Physician Information Technology Office's efforts to measure and improve the use of electronic medical records (EMRs) by select practices in BC with an assessment of their progress using a maturity model, and targeted support. The follow-up assessments showed substantial increases in the physicians' scores resulting from action plans that comprised a series of tailored support activities. Specifically, there was an increase from 21% to 83% of physicians who could demonstrate that they used their EMRs as the principal method of record-keeping.

  15. Electronic-nose technology using sputum samples in diagnosis of patients with tuberculosis

    NARCIS (Netherlands)

    Kolk, A.; Hoelscher, M.; Maboko, L.; Jung, J.; Kuijper, S.; Cauchi, M.; Bessant, C.; van Beers, S.; Dutta, R.; Gibson, T.; Reither, K.

    2010-01-01

    We investigated the potential of two different electronic noses (EN; code named "Rob" and "Walter") to differentiate between sputum headspace samples from tuberculosis (TB) patients and non-TB patients. Only samples from Ziehl-Neelsen stain (ZN)- and Mycobacterium tuberculosis culture-positive (TBPO

  16. Electronic States near Dislocations in Transition Metals : An Application of Quantum Chemistry in Technology

    NARCIS (Netherlands)

    Hosson, J.Th.M. De

    1980-01-01

    This paper outlines a model for calculating the localized states of a <100> edge dislocation in α-Fe. The model used for the calculations is based on the multiple-scattering model (SCF-Xα-SW). The purpose of this research is twofold: (1) To determine changes in electronic structure of the lattice ne

  17. Application of electron beam equipment based on a plasma cathode gun in additive technology

    Science.gov (United States)

    Galchenko, N. K.; Kolesnikova, K. A.; Semenov, G. V.; Rau, A. G.; Raskoshniy, S. Y.; Bezzubko, A. V.; Dampilon, B. V.; Sorokova, S. N.

    2016-11-01

    The paper discusses the application of electron beam equipment based on a plasma cathode gun for three-dimensional surface modification of metals and alloys. The effect of substrate surface preparation on the adhesion strength of gas thermal coatings has been investigated.

  18. Teacher-Created Electronic Books: Integrating Technology to Support Readers with Disabilities

    Science.gov (United States)

    Rhodes, Joan A.; Milby, Tammy M.

    2007-01-01

    The No Child Left Behind Act of 2001 holds U.S. schools accountable for the yearly assessment of all students as they progress toward meeting state educational goals. Students with disabilities continue to be a focal point for improving student achievement at the school and district levels. Creating teacher-made electronic books is an effective…

  19. Technical report on "BES Early Career. Control Graphene Electronic Structure for Energy Technology"

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Feng [Univ. of California, Berkeley, CA (United States)

    2015-07-11

    Graphene, a one-atom thick sheet of carbon, exhibits incredible structural flexibility, electrical transport, and optical responses. And remarkably, the graphene electronic structure can be varied through interlayer coupling, nanoscale patterning, and electrical gating. In this project we made significant contribution to better understand and control physical properties of graphene and other novel two-dimensional layered materials.

  20. Theories and technologies of electronic-electrical-mechanical integrated(EEMI)transmission system

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ EEMI is one of the hot spots in cross-disciplinary research. The research in this topic was to discard the traditional mechanical gear reducer, integrate electrical motor with mechanical load, control the electrical motor by electrical power generated by microelectronics and electrical electronics; namely, form a EEMI transmission system in the mechanical equipments with low rotation rate and large rotation torque.

  1. Extending consumer categorization based on innovativeness: Intentions and technology clusters in consumer electronics

    NARCIS (Netherlands)

    Rijnsoever, F.J. van; Castaldi, C.

    2011-01-01

    Consumer categorizations based on innovativeness were originally proposed by E.M. Rogers (2003) and remain of relevance for predicting purchasing behavior in high-tech domains such as consumer electronics. We extend such innovativeness-based categorizations in two directions: We first take into acco

  2. Technology, Identity, and Community: The Role of Electronic Teaching Portfolios in Becoming a Teacher

    Science.gov (United States)

    Trent, John; Shroff, Ronnie H.

    2013-01-01

    This article reports on an exploratory qualitative investigation of an initiative to use an electronic teaching portfolio at a teacher education institution in Hong Kong. Using in-depth interviews, this initiative is examined from the perspective of preservice teachers themselves. Interviews sought to gain an understanding of how the construction…

  3. Nuclear Technology. Course 27: Metrology. Module 27-3, Gage Blocks, Mechanical Comparators and Electronic Comparators.

    Science.gov (United States)

    Selleck, Ben; Espy, John

    This third in a series of eight modules for a course titled Metrology describes gage blocks and mechanical and electronic comparators. The module follows a typical format that includes the following sections: (1) introduction, (2) module prerequisites, (3) objectives, (4) notes to instructor/student, (5) subject matter, (6) materials needed, (7)…

  4. Teacher-Created Electronic Books: Integrating Technology to Support Readers with Disabilities

    Science.gov (United States)

    Rhodes, Joan A.; Milby, Tammy M.

    2007-01-01

    The No Child Left Behind Act of 2001 holds U.S. schools accountable for the yearly assessment of all students as they progress toward meeting state educational goals. Students with disabilities continue to be a focal point for improving student achievement at the school and district levels. Creating teacher-made electronic books is an effective…

  5. Technology Trumping Sleep: Impact of Electronic Media and Sleep in Late Adolescent Students

    Science.gov (United States)

    Moulin, Kerry L.; Chung, Chia-Jung

    2017-01-01

    The purpose of this research study was to explore with what impact evening media use interfered with either schoolwork and/or sufficient healthy sleep. In addition, the study examined with what impact there may be a compromise in students' ability or aptitude for positive academic success, related to either lack of sleep or electronic media use.…

  6. Electronic Reading and Digital Library Technologies: Understanding Learner Expectation and Usage Intent for Mobile Learning

    Science.gov (United States)

    Hyman, Jack A.; Moser, Mary T.; Segala, Laura N.

    2014-01-01

    Mobile information technology is changing the education landscape by offering learners the opportunity to engage in asynchronous, ubiquitous instruction. While there is a proliferation of mobile content management systems being developed for the mobile Web and stand-alone mobile applications, few studies have addressed learner expectations and…

  7. Correlationally Assessing the Relationship of Information Technology Investments in Electronic Medical Records to Business Value

    Science.gov (United States)

    Richardson, Daniel J.

    2009-01-01

    The lag in information exchange and assimilation adoption experienced by modern primary care physicians in the conduct of evidence based medicine may be affecting health care system productivity and patient quality of care. Further, interest in whether or not information technology (IT) investments show an increase in business value has increased…

  8. Assessing Factors Affecting Physician's Intention to Adopt Biometric Authentication Technology in Electronic Medical Records

    Science.gov (United States)

    Corazao, Cesar E.

    2014-01-01

    The Health Insurance Portability and Accountability Act of 1996 (HIPAA) regulated the privacy and security of patient information. Since HIPPA became a law, hospital operators have struggled to comply fully with its security and privacy provisions. The proximity-based biometric authentication (PBBA) technology evolved in last decade to help…

  9. Application Possibilities of Social Marketing Technologies for Publicity of Electronic Government Services

    Directory of Open Access Journals (Sweden)

    Tadas Limba

    2013-08-01

    Full Text Available Nowadays e-government projects and projects in the public sector are changing the consistency and reality of our daily life and will need to be managed by project managers, who uge modern marketing tools and technologies. Social marketing is one of the modern marketing tools and, probably, it is the best tool to provide marketing in public sector project management, It has been changing in different ways since the founding of social marketing: the aim of social marketing, the technologies for using i ; but nowadays it’s hard to imagine public sector projects and, especially, egovernment projects, without using social marketing technologies. The usage of social marketing technologies can improve public sector project management and make the project more attractive to society or some part of it. This scientific paper represents social marketing transformation, the way in which social marketing needs to be used in the public sector project management process and analyses the phases of social marketing. It also gives some practical advics for public sector organizations o, how to implement social marketing in the e-government project deployment process.

  10. Development of Distributed System for Electronic Business Based on Java-Technologies

    Science.gov (United States)

    Kintonova, Aliya Zh.; Andassova, Bakkaisha Z.; Ermaganbetova, Madina A.; Maikibaeva, Elmira K.

    2016-01-01

    This paper describes the results of studies on the peculiarities of distributed information systems, and the research of distributed systems technology development. The paper also provides the results of the analysis of E-business market research in the Republic of Kazakhstan. The article briefly describes the implementation of a possible solution…

  11. Electronic Reading and Digital Library Technologies: Understanding Learner Expectation and Usage Intent for Mobile Learning

    Science.gov (United States)

    Hyman, Jack A.; Moser, Mary T.; Segala, Laura N.

    2014-01-01

    Mobile information technology is changing the education landscape by offering learners the opportunity to engage in asynchronous, ubiquitous instruction. While there is a proliferation of mobile content management systems being developed for the mobile Web and stand-alone mobile applications, few studies have addressed learner expectations and…

  12. Correlationally Assessing the Relationship of Information Technology Investments in Electronic Medical Records to Business Value

    Science.gov (United States)

    Richardson, Daniel J.

    2009-01-01

    The lag in information exchange and assimilation adoption experienced by modern primary care physicians in the conduct of evidence based medicine may be affecting health care system productivity and patient quality of care. Further, interest in whether or not information technology (IT) investments show an increase in business value has increased…

  13. 76 FR 76640 - Telecommunications Act Accessibility Guidelines; Electronic and Information Technology...

    Science.gov (United States)

    2011-12-08

    ... Parts 1193 and 1194 [Docket No. 2011-07] RIN 3014-AA37 Telecommunications Act Accessibility Guidelines... technology, which apply to federal agencies, and its guidelines for telecommunications accessibility, which apply to telecommunications manufacturers. The text of the proposed standards and guidelines...

  14. Development and Application of Novel Electron Transfer Dissociation-based Technologies for Proteomics

    NARCIS (Netherlands)

    Frese, C.

    2013-01-01

    Proteins are key actors in all cellular processes and pathways and almost all diseases are linked to perturbations of proteins, their modification state or interaction networks. Mass spectrometry-based proteomics has matured to a high-throughput quantitative technology, aiming to provide sensitive,

  15. Complete electronics self-teaching guide with projects

    CERN Document Server

    Boysen, Earl

    2012-01-01

    An all-in-one resource on everything electronics-related! For almost 30 years, this book has been a classic text for electronics enthusiasts. Now completely updated for today's technology, this latest version combines concepts, self-tests, and hands-on projects to offer you a completely repackaged and revised resource. This unique self-teaching guide features easy-to-understand explanations that are presented in a user-friendly format to help you learn the essentials you need to work with electronic circuits. All you need is a general understanding of electronics concepts such as Oh

  16. Research on Digital Output Verification Technology of Electronic DC Current Transformer

    Science.gov (United States)

    Chen, Yuanjie; Wang, Bin; Hu, Haoliang; Xiong, Qianzhu; Yang, Chunyan

    2017-05-01

    Aiming at the error of calibration system when conducting field calibration by electronic DC current transformer’s digital calibration system, an electronic DC current transformer’s digital calibration system based on protocol conversion is proposed and researched. Data frames outputted from merging unit are collected and converted by the system, the digital synchronization is realized by using the synchronous clock device to trigger the second pulse, and it is verified by the virtual instrument design software. The field calibration is conducted to some converter station digital dc current transformer under the rated current of 500A by using the calibration system. By calibrating and analyzing errors, the error is less than 0.075% when tested current is more than 40% of the rated current. According the standard in literature[1], performance of the calibration system is perfect, measured results perfectly meet the requirements of design, and the calibration system has great practical application value.

  17. Exploration Technology Developments Program's Radiation Hardened Electronics for Space Environments (RHESE) Project Overview

    Science.gov (United States)

    Keys, Andrew S.; Adams, James H.; Darty, Ronald C.; Patrick, Marshall C.; Johnson, Michael A.; Cressler, John D.

    2008-01-01

    Primary Objective: 1) A computational tool to accurately predict electronics performance in the presence of space radiation in support of spacecraft design: a) Total dose; b) Single Event Effects; and c) Mean Time Between Failure. (Developed as successor to CR ME96.) Secondary Objectives: 2) To provide a detailed description of the natural radiation environment in support of radiation health and instrument design: a) In deep space; b) Inside the magnetosphere; and c) Behind shielding.

  18. A kinetic sensitivity analysis for the SO2 and NOx removal using the electron beam technology

    Science.gov (United States)

    Zwolińska, Ewa; Gogulancea, Valentina; Sun, Yongxia; Lavric, Vasile; Chmielewski, Andrzej

    2017-09-01

    The mathematical modeling of the phenomena taking place during the electron beam flue gas treatment is a complex endeavor due to the different time scales of the processes occurring as accelerated electrons are bombarding the flue gas. The paper presents a complex kinetic model for these gas phase interactions, consisting of 1034 chemical reactions with the participation of 115 reactive species. The mathematical model couples the complex gas phase kinetics with a liquid phase kinetic model, taking into account the nucleation and condensation phenomena occurring due to the presence of sulfuric acid. The modeling results for both coupled and uncoupled gas phase kinetics are validated against a set of literature experimental data with satisfactory outcome. The work aims to identify the most important chemical reactions influencing the pollutants removal, proposing a sensitivity analysis using the concept of generated entropy. To the best of the authors' knowledge a sensitivity analysis of this extent has not been performed for the electron beam flue gas treatment. The results of this analysis emphasize the link between the removal efficiencies of NOx and SO2, the importance of hydroxyl radicals and can aid in future model reduction efforts.

  19. Accelerator-based electron beam technologies for modification of bipolar semiconductor devices

    Science.gov (United States)

    Pavlov, Y. S.; Surma, A. M.; Lagov, P. B.; Fomenko, Y. L.; Geifman, E. M.

    2016-09-01

    Radiation processing technologies for static and dynamic parameters modification of silicon bipolar semiconductor devices implemented. Devices of different classes with wide range of operating currents (from a few mA to tens kA) and voltages (from a few volts to 8 kV) were processed in large scale including power diodes and thyristors, high-frequency bipolar and IGBT transistors, fast recovery diodes, pulsed switching diodes, precise temperature- compensated Zener diodes (in general more than fifty 50 device types), produced by different enterprises. The necessary changes in electrical parameters and characteristics of devices caused by formation in the device structures of electrically active and stable in the operating temperature range sub-nanoscale recombination centres. Technologies implemented in the air with high efficiency and controllability, and are an alternative to diffusion doping of Au or Pt, γ-ray, proton and low-Z ion irradiation.

  20. Understanding intention to use electronic information resources: A theoretical extension of the technology acceptance model (TAM).

    Science.gov (United States)

    Tao, Donghua

    2008-11-06

    This study extended the Technology Acceptance Model (TAM) by examining the roles of two aspects of e-resource characteristics, namely, information quality and system quality, in predicting public health students' intention to use e-resources for completing research paper assignments. Both focus groups and a questionnaire were used to collect data. Descriptive analysis, data screening, and Structural Equation Modeling (SEM) techniques were used for data analysis. The study found that perceived usefulness played a major role in determining students' intention to use e-resources. Perceived usefulness and perceived ease of use fully mediated the impact that information quality and system quality had on behavior intention. The research model enriches the existing technology acceptance literature by extending TAM. Representing two aspects of e-resource characteristics provides greater explanatory information for diagnosing problems of system design, development, and implementation.

  1. Multidisciplinary Approach to the Science and Technology of Sub-Micron Electronics.

    Science.gov (United States)

    1987-03-10

    made (Drs. Schwank and Fogler (Task 1)). In the latter project the presence of the metal is found to strongly influence the structural stability of...research results in each of the three subtasks. TASK 1: PREPARATION AND CHARACTERIZATION OF ULTRASMALL METAL CLUSTERS J. Schwank and H.S. Fogler ...Director of institute of Science and Technology R. Clarke Associate Professor of Physics and Director of Ultra-small Structures Research Office H.S. Fogler

  2. Soft X-Ray (1-7 nm) Solar Spectrometer based on novel Nanowriter Electron-Beam Nanofabrication Technology

    Science.gov (United States)

    Didkovsky, L. V.; Wieman, S. R.; Chao, W.

    2015-12-01

    A new soft X-ray (SXR) spectrometer combines proven detector technology demonstrated on the SOHO Solar EUV Monitor (SOHO/SEM) and SDO EUV SpectroPhotometer (SDO/EVE/ESP) instruments with novel technology for X-ray optics nanofabrication developed at the Lawrence Berkeley National Laboratory. The new spectrometer will provide solar SXR measurements of absolute irradiance in the 1.0 to 7.0 nm range spectrally resolved into bands narrower than 1 nm - measurements that are not available from existing solar-observing instruments but are important for studying and modeling coronal dynamics and the Sun-Earth's connection, e.g. the Earth's Ionosphere. For the proposed SXR spectrometer we will introduce a transmission grating based on novel Nanowriter Electron-Beam Nanofabrication technology developed at the Center for X-ray Optics (CXRO) at the Lawrence Berkeley National Laboratory. The CXRO technology has been used in the fabrication of X-ray zone plates with feature sizes as small as 25 nm in optical elements with overall sizes on the order of 1 cm. The CXRO technology has significant flexibility in terms of pattern geometry, and is thus capable of producing linear transmission gratings with aperture sizes similar to SEM and ESP but with four times the dispersion. With such dispersion, reasonable spectral resolution (< 1nm) can be obtained using commercial off-the shelf (COTS) X-ray sensitive AXUV type silicon photodiodes from the Optodiode Corp. in an instrument with overall size and mass similar to that of SEM or ESP.

  3. State of the Art in Electronic Assistive Technologies for People with Dementia

    Science.gov (United States)

    Lou, Ricardo Castellot; Giuliano, Angele; Mulvenna, Maurice D.

    It is estimated by 2050 that one-third of Europe's population will be over 60. Life expectancy has on average already risen by 2.5 years per decade and the number of old people aged 80+ is expected to grow by 180%. Nowadays, there are 5.5 million cases of Alzheimer-afflicted people in Europe and more new cases being added every year. In fact Alzheimer's disease has been called the "plague of the twenty-first century". There is currently no cure for this disease; however, prevention and early diagnosis may play a huge role in delaying the onset of the worst effects of this severe disease. Modern technologies could have an important role to satisfy main needs of people with dementia. Nonetheless, despite recent advancements in information and communication technologies and growing sales numbers, industry has been rather reluctant to standardise access technologies and to implement them in a "Design for All approach". Because of this, in last years, there have been launched in Europe a great number of initiatives, both public and private, which try to improve the situation of those persons who suffer this ailment and that will be detailed in this chapter.

  4. Emergent technologies: 25 years

    Science.gov (United States)

    Rising, Hawley K.

    2013-03-01

    This paper will talk about the technologies that have been emerging over the 25 years since the Human Vision and Electronic Imaging conference began that the conference has been a part of, and that have been a part of the conference, and will look at those technologies that are emerging today, such as social networks, haptic technologies, and still emerging imaging technologies, and what we might look at for the future.Twenty-five years is a long time, and it is not without difficulty that we remember what was emerging in the late 1980s. Yet to be developed: The first commercial digital still camera was not yet on the market, although there were hand held electronic cameras. Personal computers were not displaying standardized images, and image quality was not something that could be talked about in a standardized fashion, if only because image compression algorithms were not standardized yet for several years hence. Even further away were any standards for movie compression standards, there was no personal computer even on the horizon which could display them. What became an emergent technology and filled many sessions later, image comparison and search, was not possible, nor the current emerging technology of social networks- the world wide web was still several years away. Printer technology was still devising dithers and image size manipulations which would consume many years, as would scanning technology, and image quality for both was a major issue for dithers and Fourier noise.From these humble beginnings to the current moves that are changing computing and the meaning of both electronic devices and human interaction with them, we will see a course through the changing technology that holds some features constant for many years, while others come and go.

  5. Einstein today; Einstein aujourd'hui

    Energy Technology Data Exchange (ETDEWEB)

    Aspect, A.; Grangier, Ph. [Centre National de la Recherche Scientifique (CNRS), Lab. Charles Fabry de l' Institut d' Optique a Orsay, 91 - Orsay (France); Bouchet, F.R. [Institut d' Astrophysique de Paris, CNRS, 75 - Paris (France); Brunet, E.; Derrida, B. [Universite Pierre et Marie Curie, Ecole Normale Superieure, 75 - Paris (France); Cohen-Tannoudji, C. [Academie des Sciences, 75 - Paris (France); Dalibard, J.; Laloe, F. [Laboratoire Kastler Brossel. UMR 8552 (ENS, UPMC, CNRS), 75 - Paris (France); Damour, Th. [Institut des Hautes Etudes Scientifiques, 91 - Bures sur Yvette (France); Darrigol, O. [Centre National de la Recherche Scientifique (CNRS), Groupe Histoire des Sciences Rehseis, 75 - Paris (France); Pocholle, J.P. [Thales Research et Technology France, 91 - Palaiseau (France)

    2005-07-01

    The most important contributions of Einstein involve 5 fields of physics : the existence of quanta (light quanta, stimulated radiation emission and Bose-Einstein condensation), relativity, fluctuations (Brownian motion and thermodynamical fluctuations), the basis of quantum physics and cosmology (cosmological constant and the expansion of the universe). Diverse and renowned physicists have appreciated the development of modern physics from Einstein's ideas to the knowledge of today. This book is a collective book that gathers their work under 7 chapters: 1) 1905, a new beginning; 2) from the Einstein, Podolsky and Rosen's article to quantum information (cryptography and quantum computers); 3) the Bose-Einstein condensation in gases; 4) from stimulated emission to the today's lasers; 5) Brownian motion and the fluctuation-dissipation theory; 6) general relativity; and 7) cosmology. (A.C.)

  6. Sartre, Marcuse, and the Utopian Project Today

    OpenAIRE

    Tally, Robert T., Jr.

    2010-01-01

    In his article "Sartre, Marcuse, and the Utopian Project Today," Robert T. Tally Jr. discusses the philosophical legacy of the May 1968 revolution in Paris with respect to the power of the imagination and the possibilities for utopian thought in our own time. Although the rhetoric of the 1968 militants may seem dated, the underlying theoretical and political concepts are surprisingly timely in the twenty-first century. Among these, existential angst or anxiety has perhaps a heightened salienc...

  7. Uterine Prolapse: From Antiquity to Today

    Directory of Open Access Journals (Sweden)

    Keith T. Downing

    2012-01-01

    Full Text Available Uterine prolapse is a condition that has likely affected women for all of time as it is documented in the oldest medical literature. By looking at the watershed moments in its recorded history we are able to appreciate the evolution of urogynecology and to gain perspective on the challenges faced by today's female pelvic medicine and reconstructive surgeons in their attempts to treat uterine and vaginal vault prolapse.

  8. How to extend the realism today?

    Directory of Open Access Journals (Sweden)

    Juan Fernando Sellés

    2010-12-01

    Full Text Available This work investigates what is the philosophical realism. It offers a synthesis of what has been the realistic philosophy up to today regarding his discovery of the diverse senses of the act: Pure act, act of being created, intellect agent, cognitive innate and acquired habits, immanent cognitive operations, virtues of the will, acts of wanting. After that, it he proposes who it is possible to progress nowadays in the realism: discovering other senses of the act.

  9. Alternative motor fuels today and tomorrow

    Energy Technology Data Exchange (ETDEWEB)

    Bensaid, B

    2004-07-01

    Today, petroleum products account for 97% of the energy consumed in road transport. The purpose of replacing these products with alternative energies is to reduce oil dependence as well as greenhouse gas emissions. The high price of oil has promoted the use of 'conventional' alternative motor fuels (biofuels, LPG, NGV) and also renewed interest in syn-fuels (GTL, CTL, BTL) that have already given rise to industrial and pilot projects. (author)

  10. Proposal for an ad hoc computer network in the military electronic systems department at the military academy applying bluetooth technology

    Directory of Open Access Journals (Sweden)

    Miroslav R. Terzić

    2011-01-01

    Full Text Available The historical development of the Bluetooth module is given in the introduction of this paper. The importance of the Bluetooth standard for wireless connection on small distances is shown as well. The organization of the Department of Military Electronic Systems is presented with its area of duties, subordinate sections and deployment. The concept of a local area network for this Department, using Bluetooth technology, includes network topology and working regimes based on the main characteristics and technical specifications for the connection with Bluetooth technology. The Department's disperse computer network is proposed as a scatter net where one piconetwork includes the Head of Department and the Heads of Sections while other piconetworks are formed from the Heads of Sections and their subordinates. The security aspect of the presented network deals with basic computer network attack categories, protection methods and aspects. The paper concludes with some recommendations for the local area network using Bluetooth technology with respect to its economical and security aspects as well as to the managing principles of the Department.

  11. Power Electronics – Key Technology for Renewable Energy Systems – Status and Future

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Yang, Yongheng; Ma, Ke

    2013-01-01

    The energy paradigms in many countries (e.g. Germany and Denmark) have experienced a significant change from fossil-based resources to clean renewables in the past few decades. The scenario of highly penetrated renewables is going to be further enhanced. This requires that the production...... play an essential role. Using highly efficient power electronics in power generation, power transmission/ distribution and end-user application, together with advanced control solutions, can pave the way for renewable energies. In view of this, some of the most emerging renewable energies, e.g. wind...

  12. Power Electronics – The Key Technology for Renewable Energy System Integration

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Yang, Yongheng; Ma, Ke

    2015-01-01

    The energy paradigms in many countries (e.g. Germany and Denmark) have experienced a significant change from fossil-based resources to clean renewables (e.g. wind turbines and photovoltaics) in the past few decades. The scenario of highly penetrated renewables is going to be further enhanced...... solutions makes the way for renewable energies. In light of this, some of the most emerging renewable energies, e.g. wind energy and photovoltaic, which by means of power electronics are changing character as a major part in the electricity generation, are explored in this presentation. Issues like...

  13. Vision and Reality in Electronic Textbooks: What Publishers Need to Do to Survive

    Science.gov (United States)

    Brown, Byron W.

    2012-01-01

    Today's electronic textbooks (e-texts) are technologically backward and over-priced. Yet publishers continue to press for contracts with colleges and universities that move toward the mandatory purchase by students of e-texts instead of printed books. The author lays out his vision for digital learning materials, explains the details of the…

  14. Overview of space power electronic's technology under the CSTI High Capacity Power Program

    Science.gov (United States)

    Schwarze, Gene E.

    The Civilian Space Technology Initiative (CSTI) is a NASA Program targeted at the development of specific technologies in the areas of transportation, operations and science. Each of these three areas consists of major elements and one of the operation's elements is the High Capacity Power element. The goal of this element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA initiatives. The High Capacity Power element is broken down into several subelements that includes energy conversion in the areas of the free piston Stirling power converter and thermoelectrics, thermal management, power management, system diagnostics, and environmental compatibility and system's lifetime. A recent overview of the CSTI High capacity Power element and a description of each of the program's subelements is given by Winter (1989). The goals of the Power Management subelement are twofold. The first is to develop, test, and demonstrate high temperature, radiation-resistant power and control components and circuits that will be needed in the Power Conditioning, Control and Transmission (PCCT) subsystem of a space nuclear power system. The results obtained under this goal will also be applicable to the instrumentation and control subsystem of a space nuclear reactor. These components and circuits must perform reliably for lifetimes of 7-10 years. The second goal is to develop analytical models for use in computer simulations of candidate PCCT subsystems. Circuits which will be required for a specific PCCT subsystem will be designed and built to demonstrate their performance and, also, to validate the analytical models and simulations. The tasks under the Power Management subelement will now be described in terms of objectives, approach and present status of work.

  15. Overview of space power electronic's technology under the CSTI High Capacity Power Program

    Science.gov (United States)

    Schwarze, Gene E.

    1994-01-01

    The Civilian Space Technology Initiative (CSTI) is a NASA Program targeted at the development of specific technologies in the areas of transportation, operations and science. Each of these three areas consists of major elements and one of the operation's elements is the High Capacity Power element. The goal of this element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA initiatives. The High Capacity Power element is broken down into several subelements that includes energy conversion in the areas of the free piston Stirling power converter and thermoelectrics, thermal management, power management, system diagnostics, and environmental compatibility and system's lifetime. A recent overview of the CSTI High capacity Power element and a description of each of the program's subelements is given by Winter (1989). The goals of the Power Management subelement are twofold. The first is to develop, test, and demonstrate high temperature, radiation-resistant power and control components and circuits that will be needed in the Power Conditioning, Control and Transmission (PCCT) subsystem of a space nuclear power system. The results obtained under this goal will also be applicable to the instrumentation and control subsystem of a space nuclear reactor. These components and circuits must perform reliably for lifetimes of 7-10 years. The second goal is to develop analytical models for use in computer simulations of candidate PCCT subsystems. Circuits which will be required for a specific PCCT subsystem will be designed and built to demonstrate their performance and, also, to validate the analytical models and simulations. The tasks under the Power Management subelement will now be described in terms of objectives, approach and present status of work.

  16. Panel presentation at international symposium for electronic art 'Waves of technology'

    OpenAIRE

    Flaxton, T.

    2015-01-01

    This panel was formed to create a picture of, then interrogate the tsunami-like effect of the expanding capabilities of moving-image capture and display and place this within a reading of history that proposed that technology comes upon us insistently like waves upon the beach and that this situation is of our making. \\ud \\ud Panel Chair, Professor Terry Flaxton University of the West of England. Introduction 10 minutes: The concept of ‘Waves of technology’. Then part 2, 10 minutes: Examinati...

  17. SAW filter manufacture and piezoelectric materials evaluation based on printed electronics technology

    Science.gov (United States)

    Liu, Xiao-chen; Li, Kun; Xuan, Xiu-wei; Cao, Yang; Teng, Jian-fu

    2014-09-01

    In this paper, the silver nanoparticle ink and ink-jet printing technology are used to manufacture the surface acoustic wave (SAW) filters. The characteristics of three common substrate piezoelectric materials of ST-quartz, Y36°-LiTaO3 and Y128°-LiNbO3 are evaluated. The experimental results show that Y128°-LiNbO3 matches the ink much better than others. The printed SAW filter with Y128°-LiNbO3 as piezoelectric substrate is realized, and its center frequency and bandwidth are 18.4 MHz and 500 kHz, respectively.

  18. Technology basis and perspectives on focused electron beam induced deposition and focused ion beam induced deposition

    Energy Technology Data Exchange (ETDEWEB)

    Rius, Gemma, E-mail: rius.gemma@nitech.ac.jp

    2014-12-15

    The main characteristics of focused electron beam induced deposition (FEBID) and focused ion beam induced deposition (FIBID) are presented. FEBID and FIBID are two nanopatterning techniques that allow the fabrication of submicron patterns with nanometer resolution on selected locations of any kind of substrate, even on highly structured supports. The process consists of mask less serial deposition and can be applied to a wide variety of materials, depending strictly on the precursor material source used. The basic mechanism of FEBID and FIBID is the adsorption of volatile precursor molecules onto the sample surface and decomposition of the molecules induced by the energetic electron and ion focused beams. The essential similarities of the two techniques are presented and especial emphasis is dedicated to highlighting their main differences, such as aspects related to resolution, deposition rate, deposits purity, substrate integrity, etc. In both cases, the factors interplay and complex mechanisms are still understood in a qualitative basis, so much work can still be done in terms of modeling and simulating the processes involved in FEBID and FIBID. Current work on FEBID and FIBID is presented through examples of achievements, interesting results and novel approaches.

  19. Communication technology and social media: opportunities and implications for healthcare systems.

    Science.gov (United States)

    Weaver, Betsy; Lindsay, Bill; Gitelman, Betsy

    2012-09-30

    Electronic patient education and communications, such as email, text messaging, and social media, are on the rise in healthcare today. This article explores potential uses of technology to seek solutions in healthcare for such challenges as modifying behaviors related to chronic conditions, improving efficiency, and decreasing costs. A brief discussion highlights the role of technologies in healthcare informatics and considers two theoretical bases for technology implementation. Discussion focuses more extensively on the ability and advantages of electronic communication technology, such as e-mail, social media, text messaging, and electronic health records, to enhance patient-provider e-communications in nursing today. Effectiveness of e-communication in healthcare is explored, including recent and emerging applications designed to improve patient-provider connections and review of current evidence supporting positive outcomes. The conclusion addresses the vision of nurses' place in the vanguard of these developments.

  20. Rational engineering of Geobacter sulfurreducens electron transfer components: a foundation for building improved Geobacter-based bioelectrochemical technologies

    Directory of Open Access Journals (Sweden)

    Joana M Dantas

    2015-07-01

    Full Text Available Multiheme cytochromes have been implicated in Geobacter sulfurreducens (Gs extracellular electron transfer (EET. These proteins are potential targets to improve EET and enhance bioremediation and electrical current production by Gs. However, the functional characterization of multiheme cytochromes is particularly complex due to the co-existence of several microstates in solution, connecting the fully reduced and fully oxidized states. Over the last decade, new strategies have been developed to characterize multiheme redox proteins functionally and structurally. These strategies were used to reveal the functional mechanism of Gs multiheme cytochromes and also to identify key residues in these proteins for EET. In previous studies, we set the foundations for enhancement of the EET abilities of Gs by characterizing a family of five triheme cytochromes (PpcA-E. These periplasmic cytochromes are implicated in electron transfer between the oxidative reactions of metabolism in the cytoplasm and the reduction of extracellular terminal electron acceptors at the cell’s outer surface. The results obtained suggested that PpcA can couple e-/H+ transfer, a property that might contribute to the proton electrochemical gradient across the cytoplasmic membrane for metabolic energy production. The structural and functional properties of PpcA were characterized in detail and used for rational design of a family of 23 single site PpcA mutants. In this review, we summarize the functional characterization of the native and mutant proteins. Mutants that retain the mechanistic features of PpcA and adopt preferential e-/H+ transfer pathways at lower reduction potential values compared to the wild-type protein were selected for in vivo studies as the best candidates to increase the electron transfer rate of Gs. For the first time Gs strains have been manipulated by the introduction of mutant forms of essential proteins with the aim to develop and improve

  1. Rational engineering of Geobacter sulfurreducens electron transfer components: a foundation for building improved Geobacter-based bioelectrochemical technologies.

    Science.gov (United States)

    Dantas, Joana M; Morgado, Leonor; Aklujkar, Muktak; Bruix, Marta; Londer, Yuri Y; Schiffer, Marianne; Pokkuluri, P Raj; Salgueiro, Carlos A

    2015-01-01

    Multiheme cytochromes have been implicated in Geobacter sulfurreducens extracellular electron transfer (EET). These proteins are potential targets to improve EET and enhance bioremediation and electrical current production by G. sulfurreducens. However, the functional characterization of multiheme cytochromes is particularly complex due to the co-existence of several microstates in solution, connecting the fully reduced and fully oxidized states. Over the last decade, new strategies have been developed to characterize multiheme redox proteins functionally and structurally. These strategies were used to reveal the functional mechanism of G. sulfurreducens multiheme cytochromes and also to identify key residues in these proteins for EET. In previous studies, we set the foundations for enhancement of the EET abilities of G. sulfurreducens by characterizing a family of five triheme cytochromes (PpcA-E). These periplasmic cytochromes are implicated in electron transfer between the oxidative reactions of metabolism in the cytoplasm and the reduction of extracellular terminal electron acceptors at the cell's outer surface. The results obtained suggested that PpcA can couple e(-)/H(+) transfer, a property that might contribute to the proton electrochemical gradient across the cytoplasmic membrane for metabolic energy production. The structural and functional properties of PpcA were characterized in detail and used for rational design of a family of 23 single site PpcA mutants. In this review, we summarize the functional characterization of the native and mutant proteins. Mutants that retain the mechanistic features of PpcA and adopt preferential e(-)/H(+) transfer pathways at lower reduction potential values compared to the wild-type protein were selected for in vivo studies as the best candidates to increase the electron transfer rate of G. sulfurreducens. For the first time G. sulfurreducens strains have been manipulated by the introduction of mutant forms of essential

  2. Rational engineering of Geobacter sulfurreducens electron transfer components: a foundation for building improved Geobacter-based bioelectrochemical technologies

    Science.gov (United States)

    Dantas, Joana M.; Morgado, Leonor; Aklujkar, Muktak; Bruix, Marta; Londer, Yuri Y.; Schiffer, Marianne; Pokkuluri, P. Raj; Salgueiro, Carlos A.

    2015-01-01

    Multiheme cytochromes have been implicated in Geobacter sulfurreducens extracellular electron transfer (EET). These proteins are potential targets to improve EET and enhance bioremediation and electrical current production by G. sulfurreducens. However, the functional characterization of multiheme cytochromes is particularly complex due to the co-existence of several microstates in solution, connecting the fully reduced and fully oxidized states. Over the last decade, new strategies have been developed to characterize multiheme redox proteins functionally and structurally. These strategies were used to reveal the functional mechanism of G. sulfurreducens multiheme cytochromes and also to identify key residues in these proteins for EET. In previous studies, we set the foundations for enhancement of the EET abilities of G. sulfurreducens by characterizing a family of five triheme cytochromes (PpcA-E). These periplasmic cytochromes are implicated in electron transfer between the oxidative reactions of metabolism in the cytoplasm and the reduction of extracellular terminal electron acceptors at the cell's outer surface. The results obtained suggested that PpcA can couple e−/H+ transfer, a property that might contribute to the proton electrochemical gradient across the cytoplasmic membrane for metabolic energy production. The structural and functional properties of PpcA were characterized in detail and used for rational design of a family of 23 single site PpcA mutants. In this review, we summarize the functional characterization of the native and mutant proteins. Mutants that retain the mechanistic features of PpcA and adopt preferential e−/H+ transfer pathways at lower reduction potential values compared to the wild-type protein were selected for in vivo studies as the best candidates to increase the electron transfer rate of G. sulfurreducens. For the first time G. sulfurreducens strains have been manipulated by the introduction of mutant forms of essential

  3. STRATEGY FOR EVALUATION AND SELECTION OF SYSTEMS FOR ELECTRONIC LEARNING

    Directory of Open Access Journals (Sweden)

    Dubravka Mandušić

    2012-12-01

    Full Text Available Today`s technology supported and accelerated learning time requires constant and continuous acquisition of new knowledge. On the other hand, it does not leave enough time for additional education. Increasing number of E-learning systems, withdraws a need for precise evaluation of functionality that those systems provide; so they could be reciprocally compared. While implementing new systems for electronic learning, it is very important to pre-evaluate existing systems in order to select the one that meets all defined parameters, with low costs/investment. Proper evaluation can save time and money.

  4. A Study on Electronic-Money Technology Using Near Field Communication

    Directory of Open Access Journals (Sweden)

    Min Soo Jung

    2014-12-01

    Full Text Available Recently, due to the introduction of NFC (Near Field Communication, it has become possible to make easy electronic payments. Therefore, a secure communication method is necessary in these environments. NFC can be said to be relatively safe compared to other communication methods, because it carries out communications within 10 cm. However, it has made possible the risk of impersonation attacks by a disguised reader, leaving user information on the reader. In order to solve these problems, in this paper, we propose an authentication scheme that can reduce the weight of computation by using only a hash function and XOR (eXclusive OR operation algorithms. This paper also shows that our method is safe, since it leaves no information with the other party.

  5. Emerging technologies to power next generation mobile electronic devices using solar energy

    Institute of Scientific and Technical Information of China (English)

    Dewei JIA; Yubo DUAN; Jing LIU

    2009-01-01

    Mobile electronic devices such as MP3, mobile phones, and wearable or implanted medical devices have already or will soon become a necessity in peoples' lives.However, the further development of these devices is restricted not only by the inconvenient charging process of the power module, but also by the soaring prices of fossil fuel and its downstream chain of electricity manipulation.In view of the huge amount of solar energy fueling the world biochemically and thermally, a carry-on electricity harvester embedded in portable devices is emerging as a most noteworthy research area and engineering practice for a cost efficient solution. Such a parasitic problem is intrinsic in the next generation portable devices. This paper is dedicated to presenting an overview of the photovoltaic strategy in the chain as a reference for researchers and practitioners committed to solving the problem.

  6. A photosynthetic biosensor with enhanced electron transfer generation realized by laser printing technology.

    Science.gov (United States)

    Touloupakis, Eleftherios; Boutopoulos, Christos; Buonasera, Katia; Zergioti, Ioanna; Giardi, Maria Teresa

    2012-04-01

    One of the limits of current electrochemical biosensors is a lack of methods providing stable and highly efficient junctions between biomaterial and solid-state devices. This paper shows how laser-induced forward transfer (LIFT) can enable efficient electron transfer from photosynthetic biomaterial immobilized on screen-printed electrodes (SPE). The ideal pattern, in terms of photocurrent signal of thylakoid droplets giving a stable response signal with a current intensity of approximately 335 ± 13 nA for a thylakoid mass of 28 ± 4 ng, was selected. It is shown that the efficiency of energy production of a photosynthetic system can be strongly enhanced by the LIFT process, as demonstrated by use of the technique to construct an efficient and sensitive photosynthesis-based biosensor for detecting herbicides at nanomolar concentrations.

  7. ELECTRONIC BANKING AND ELECTRONIC COMMERCE IN SERBIA

    Directory of Open Access Journals (Sweden)

    Ivana B. Petrevska

    2014-10-01

    Full Text Available Nowadays, we may witness to dramatic and visible changes in our life environment. Business ambient for companies is different every day, and it is very hard to predict a direction of future changes. There is an environment characterized by sharp competition and increasing number of competitors, fast technological improvements and highly sophisticated and informed costumers. Technological process influences the humanity strongly, changing the way that people live, work and spend. Electronic commerce and electronic banking has become incontinent, and makes a great part of today's total transactions. There are an increasing number of companies that perform their business that way and make profit. Social networks are proven to be the least expensive way of information exchange, and they are present in almost every part of the world. The globalization has reached the most distant parts of the Earth. Every resistance to new technologies is dangerous and may lead to bankruptcy. Due to the EU expansion, Internet users are to be expected, and prosperity of the e-commerce business models at the same time. In Serbia, electronic commerce is present, but not as developed as in EU countries. E-commerce, however it might be successful throughout the world, it is somewhat slow in its growth in Serbia. The reasons are numerous, and main obstacles are the lack of trust, still limited usage of banking cards, avoiding of e-payments by older population etc. Also, the recent scandals over the misuse of personal data, and e-crime are discouraging factors for the growth of e-trade and ebanking. The younger generations are ever more ready to use e-commerce, since they are open to new technologies and do not have the defensive attitude towards it. E-commerce and e-banking has growing potential even among older population, if the society prevents them from fear and mistrust.

  8. Design and Fabrication of Nanoscale IDTs Using Electron Beam Technology for High-Frequency SAW Devices

    Directory of Open Access Journals (Sweden)

    Wei-Che Shih

    2014-01-01

    Full Text Available High-frequency Rayleigh-mode surface acoustic wave (SAW devices were fabricated for 4G mobile telecommunications. The RF magnetron sputtering method was adopted to grow piezoelectric aluminum nitride (AlN thin films on the Si3N4/Si substrates. The influence of sputtering parameters on the crystalline characteristics of AlN thin films was investigated. The interdigital transducer electrodes (IDTs of aluminum (Al were then fabricated onto the AlN surfaces by using the electron beam (e-beam direct write lithography method to form the Al/AlN/Si3N4/Si structured SAW devices. The Al electrodes were adopted owing to its low resistivity, low cost, and low density of the material. For 4G applications in mobile telecommunications, the line widths of 937 nm, 750 nm, 562 nm, and 375 nm of IDTs were designed. Preferred orientation and crystalline properties of AlN thin films were determined by X-ray diffraction using a Siemens XRD-8 with CuKα radiation. Additionally, the cross-sectional images of AlN thin films were obtained by scanning electron microscope. Finally, the frequency responses of high-frequency SAW devices were measured using the E5071C network analyzer. The center frequencies of the high-frequency Rayleigh-mode SAW devices of 1.36 GHz, 1.81 GHz, 2.37 GHz, and 3.74 GHz are obtained. This study demonstrates that the proposed processing method significantly contributes to high-frequency SAW devices for wireless communications.

  9. Development of free electron laser and accelerator technology in Poland (CARE and EuCARD projects)

    CERN Document Server

    Romaniuk, Ryszard

    2009-01-01

    The development of accelerator technology in Poland is strictly combined with the cooperation with specialist accelerator centers of global character, where the relevant knowledge is generated, allowing to build big and modern machines. These are relatively costly undertakings of interdisciplinary character. Most of them are financed from the local resources. Only the biggest machines are financed commonly by many nations like: LHC in CERN, ILC in Fermi Lab, E-XFEL in DESY. A similar financing solution has to be implemented in Poland, where a scientific and political campaign is underway on behalf of building two big machines, a Polish Synchrotron in Kraków and a Polish FEL in Świerk. Around these two projects, there are realized a dozen or so smaller ones.

  10. Impact of information technology on vendor objectives, capabilities, and competences in contract electronic manufacturing

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Mefford, Robert; Christoffersen, Mads

    2012-01-01

    Many factors influence the success of an outsourcing arrangement but vendor capabilities have been recognized as one of the main contributors. This paper investigates how information technology (IT) utilization contributes to success in outsourcing. We take a vendor's perspective and study how...... IT impacts vendor capabilities. The research framework integrates four concepts/theories: the resource-based view (RBV), the concept of manufacturing strategy, the concept of business performance, and the concept of IT impact on business performance. Two case companies are studied, one with a high level...... of IT development and another for which this is not the case. The results show that IT impacts vendor objectives indirectly by impacting competences and capabilities. Two types of impact of IT on competences and capabilities have been identified: IT as a competence enabler and IT as a capability enhancer. The most...

  11. Metallurgical challenges in microelectronic 3D IC packaging technology for future consumer electronic products

    Institute of Scientific and Technical Information of China (English)

    K.; N.; TU; TIAN; Tian

    2013-01-01

    Metallurgical challenges in controlling the microstructural stability of Cu and solder microbumps in 3D IC packaging technol-ogy are discussed. Using uni-directional <111> oriented nanotwinned Cu, the controlled growth of oriented Cu6Sn5 on the nanotwinned Cu and its transformation to Cu3Sn without Kirkendall voids have been achieved. In order to join a stack of Si chips into a 3D device, multiple reflows of solder microbumps may be required; we consider localized heating to do so by the use of self-sustained explosive reaction in multi-layered Al/Ni thin films of nano thickness. It avoids re-melting of those solder joints which have been formed already in the 3D stacking structure.

  12. Intention to use and actual use of electronic information resources: further exploring Technology Acceptance Model (TAM).

    Science.gov (United States)

    Tao, Donghua

    2009-11-14

    Following up a previous study that examined public health students' intention to use e-resources for completing research paper assignments, the present study proposed two models to investigate whether or not public health students actually used the e-resources they intended to use and whether or not the determinants of intention to use predict actual use of e-resources. Focus groups and pre- and post-questionnaires were used to collect data. Descriptive analysis, data screening, and Structural Equation Modeling (SEM) techniques were used for data analysis. The study found that the determinants of intention-to-use significantly predict actual use behavior. Direct impact of perceived usefulness and indirect impact of perceived ease of use to both behavior intention and actual behavior indicated the importance of ease of use at the early stage of technology acceptance. Non-significant intention-behavior relationship prompted thoughts on the measurement of actual behavior and multidimensional characteristics of the intention construct.

  13. The development of a room temperature electron cyclotron resonance ion source (Lanzhou electron cyclotron resonance ion source No. 4) with evaporative cooling technology at Institute of Modern Physics

    Energy Technology Data Exchange (ETDEWEB)

    Lu, W., E-mail: luwang@impcas.ac.cn; Sun, L. T.; Qian, C.; Feng, Y. C.; Ma, H. Y.; Zhang, X. Z.; Ma, B. H.; Zhao, H. W. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 73000 (China); Guo, J. W.; Fang, X.; Yang, Y. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 73000 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Xiong, B.; Guo, S. Q.; Ruan, L. [Institute of Electrical Engineering, CAS, Beijing 100190 (China)

    2015-04-15

    LECR4 (Lanzhou electron cyclotron resonance ion source No. 4) has been successfully constructed at IMP and has also been connected with the Low Energy Beam Transport (LEBT) and Radio Frequency Quadrupole (RFQ) systems. These source magnet coils are cooled through evaporative cooling technology, which is the first attempt with an ECR ion source in the world. The maximum mirror field is 2.5 T (with iron plug) and the effective plasma chamber volume is 1.2 l. It was designed to be operated at 18 GHz and aimed to produce intense multiple charge state heavy ion beams for the linear injector project SSC-Linac at IMP. In February 2014, the first analyzed beam at 18 GHz was extracted. During about three months’ commissioning, some outstanding results have been achieved, such as 1.97 emA of O{sup 6+}, 1.7 emA of Ar{sup 8+}, 1.07 emA of Ar{sup 9+}, and 118 euA of Bi{sup 28+}. The source has also successfully delivered O{sup 5+} and Ar{sup 8+} ion beams for RFQ commissioning in April 2014. This paper will give a brief overview of the design of LECR4. Then, the latest results of this source at 18 GHz will be presented.

  14. The development of a room temperature electron cyclotron resonance ion source (Lanzhou electron cyclotron resonance ion source No. 4) with evaporative cooling technology at Institute of Modern Physics.

    Science.gov (United States)

    Lu, W; Sun, L T; Qian, C; Guo, J W; Fang, X; Feng, Y C; Yang, Y; Ma, H Y; Zhang, X Z; Ma, B H; Xiong, B; Guo, S Q; Ruan, L; Zhao, H W

    2015-04-01

    LECR4 (Lanzhou electron cyclotron resonance ion source No. 4) has been successfully constructed at IMP and has also been connected with the Low Energy Beam Transport (LEBT) and Radio Frequency Quadrupole (RFQ) systems. These source magnet coils are cooled through evaporative cooling technology, which is the first attempt with an ECR ion source in the world. The maximum mirror field is 2.5 T (with iron plug) and the effective plasma chamber volume is 1.2 l. It was designed to be operated at 18 GHz and aimed to produce intense multiple charge state heavy ion beams for the linear injector project SSC-Linac at IMP. In February 2014, the first analyzed beam at 18 GHz was extracted. During about three months' commissioning, some outstanding results have been achieved, such as 1.97 emA of O(6+), 1.7 emA of Ar(8+), 1.07 emA of Ar(9+), and 118 euA of Bi(28+). The source has also successfully delivered O(5+) and Ar(8+) ion beams for RFQ commissioning in April 2014. This paper will give a brief overview of the design of LECR4. Then, the latest results of this source at 18 GHz will be presented.

  15. IN TODAY'S INFORMATION AGE ORGANISATIONS EXECUTIVE ASSISTANT PROFESSION

    Directory of Open Access Journals (Sweden)

    Bekir DEĞİRMENCİ

    2015-07-01

    Full Text Available It's as old as human history in the Executive Office and of the concept has caused the unborn. From the industrial revolution, they perform the organizational activities of all employees in the area are the name of the Office. Businesses are not just places that made production. Businesses also allows the production of all kinds of people have seen the need, the important strategic decisions, increase the quali ty of production and employees must work efficiently and effectively - conscious upon arrival places always have been offices. Marketing, management, human resources, accounting, as units have been operating in all offices within the organization. In today' s information age, information offices are produced, distributed to individuals and corporations concerned, but also has been the destruction of redundant information and important information later when needed has been used places. Today's globalization i s rapid change in knowledge and technology organizations in the management of business owners and managers will help many professions on WikiMapia. Office; Administrator, officer, Secretary, will serve the objectives of the business class ser vices help kin d of elements are needed. Businesses in maintaining vital activities, production and service provision of the activities of the Organization in ensuring an effective and efficient manner within the framework of the team spirit in the conduct of managers with the most important requirements for an Assistant Manager's position has been. Most modern - day organizations close to the administrator should be looking to key features of the Administrative Assistant; the Office of the administrator, who knows how t o keep a secret is not a characteristic of people who best represent the Bureau. When a business can stand in straight execution activities Administrative Assistant has important tasks to. Executive Assistants are indispensable ingredients of today's mode rn office.

  16. Low power analog front-end electronics in deep submicrometer CMOS technology based on gain enhancement techniques

    Energy Technology Data Exchange (ETDEWEB)

    Gómez-Galán, J.A., E-mail: jgalan@uhu.es [Dpto de Ingeniería Electrónica, Sist. Informáticos y Automática, Universidad de Huelva (Spain); Sánchez-Rodríguez, T.; Sánchez-Raya, M.; Martel, I. [Dpto de Ingeniería Electrónica, Sist. Informáticos y Automática, Universidad de Huelva (Spain); López-Martín, A. [Dpto de Ingeniería Eléctrica y Electrónica, Universidad Pública de Navarra (Spain); Carvajal, R.G. [Dpto de Ingeniería Electrónica, Universidad de Sevilla (Spain); Ramírez-Angulo, J. [Klipsch School of Electrical Engineering, New Mexico State University (United States)

    2014-06-01

    This paper evaluates the design of front-end electronics in modern technologies to be used in a new generation of heavy ion detectors—HYDE (FAIR, Germany)—proposing novel architectures to achieve high gain in a low voltage environment. As conventional topologies of operational amplifiers in modern CMOS processes show limitations in terms of gain, novel approaches must be raised. The work addresses the design using transistors with channel length of no more than double the feature size and a supply voltage as low as 1.2 V. A front-end system has been fabricated in a 90 nm process including gain boosting techniques based on regulated cascode circuits. The analog channel has been optimized to match a detector capacitance of 5 pF and exhibits a good performance in terms of gain, speed, linearity and power consumption.

  17. Discussion on Electrical and electronic technology teaching%电工及电子技术教学探讨

    Institute of Scientific and Technical Information of China (English)

    焦灵侠

    2015-01-01

    In this paper,in order to cultivate the students' creative thinking as the goal,optimize the teaching content,combined with modern teaching methods,linking theory with practice,increase the basic experiment,improve students' learning ability and comprehensive ability,made some attempts in electrical and electronic technology teaching reform in the non electrical majors.%本文以培养学生创造性思维为目标,优化教学内容,结合现代化教学手段,理论联系实践,增加基础性实验,提高学生学习能力和综合能力,在非电类专业电工及电子技术教学改革中做了一些尝试。

  18. High-temperature electron irradiation and radiation-thermal technology for utilization, purification and production of some metals

    CERN Document Server

    Solovetskii, Y; Lunin, V

    1998-01-01

    High-temperature irradiation by the beam of 1.2-1.6 MeV accelerated electrons has been used for production Pt, Pd, Mo, Co, Cu and Ni from desactivated Pt(Pd)-containing reforming catalysts, molybdenum sulfide hydrodesulphurization catalysts and hydrogenation catalyst waste material. The radiation-induced decomposition of supported Ni(Co)-Mo/Al sub 2 O sub 3 sulfide catalyst and organic fragments of hydrogenation catalyst wastes has been studied. Radiolysis product distributions are shown as function of time (time up to 1,0 h) and temperature (570-1400K). There was made a principle scheme of the first technological unit for radiation-thermal utilization, purification and production of some metals from solid wastes material.

  19. How nanoscience translates into technology: the case of self-assembled monolayers, electron-beam writing, and carbon nanomembranes.

    Science.gov (United States)

    Palmer, R E; Robinson, A P G; Guo, Q

    2013-08-27

    One of the great quests in nanotechnology is to translate nanoprecision materials science into practical manufacturing processes. The paper by Angelova et al. in this issue of ACS Nano, which discusses the production of functional carbon-based membranes with a thickness of 0.5 to 3 nm, provides instructive insight into how researchers are pulling together complementary strands from a quarter century of nanoscience research to develop novel, hybrid processing schemes. In this Perspective, we reflect on the progress that is taking place in the two principal component technologies combined in this scheme, namely, (i) control of self-assembled monolayers, including their detailed atomic structures, and (ii) electron-induced manipulation and processing of molecular layers, as well as considering (iii) remaining challenges for thin membrane production in the future.

  20. Engineering materials properties and process technologies for electronic and energy applications

    Science.gov (United States)

    Hailey, Anna Kathryn

    In this thesis, we pushed the boundaries of knowledge toward exciting new alternatives in the fields of electronic materials and energy. In Part 1, we focused on organic semiconductors, assessing how disorder on different length scales impacts the electrical properties in organic thin-film transistors (OTFTs). We first explored the effect of disorder at the molecular scale due to the coexistence of isomers in thin films. By blending fractional quantities of syn and anti isomers of triethylsilylethynyl anthradithiophene (TES ADT), we found that the electrical properties of devices comprising the anti isomer plummet to that of syn after the addition of only 10% syn. Through single-crystal computational analysis, we determined that the addition of syn disorders the two-dimensional electronic coupling between anti molecules, thereby increasing charge trapping and decreasing mobilities in OTFTs with increasing syn concentrations in the active layers. We also elucidated the impact of disorder stemming from boundaries between crystalline superstructures in polycrystalline thin films. By measuring the electrical characteristics of OTFTs across interspherulite boundaries (ISBs) in TES ADT and rubrene thin films, we found the energy barriers for charge transport across ISBs to be more akin to those found across the boundaries between polymer crystallites than between conventional molecular-semiconductor grains. In contrast to sharp, creviced grain boundaries, ISBs presumably comprise trapped molecules that electrically connect neighboring spherulites, as polymer chains connect crystallites in polymer-semiconductor thin films. In Part 2, we turned our focus to the production of alternative liquid fuels, evaluating process designs to produce "drop-in" replacement diesel and gasoline from non-food biomass and domestic natural gas. By considering the storage of captured byproduct CO2 in nearby depleted shale-gas wells, these processes produce liquid fuels with low

  1. Hard electronics; Hard electronics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In the fields of power conversion devices and broadcasting/communication amplifiers, high power, high frequency and low losses are desirable. Further, for electronic elements in aerospace/aeronautical/geothermal surveys, etc., heat resistance to 500degC is required. Devices which respond to such hard specifications are called hard electronic devices. However, with Si which is at the core of the present electronics, the specifications cannot fully be fulfilled because of the restrictions arising from physical values. Accordingly, taking up new device materials/structures necessary to construct hard electronics, technologies to develop these to a level of IC were examined and studied. They are a technology to make devices/IC of new semiconductors such as SiC, diamond, etc. which can handle higher temperature, higher power and higher frequency than Si and also is possible of reducing losses, a technology to make devices of hard semiconducter materials such as a vacuum microelectronics technology using ultra-micro/high-luminance electronic emitter using negative electron affinity which diamond, etc. have, a technology to make devices of oxides which have various electric properties, etc. 321 refs., 194 figs., 8 tabs.

  2. Global aromatics supply. Today and tomorrow

    Energy Technology Data Exchange (ETDEWEB)

    Bender, M. [BASF SE, Ludwigshafen (Germany)

    2013-11-01

    Aromatics are the essential building blocks for some of the largest petrochemical products in today's use. To the vast majority they are consumed to produce intermediates for polymer products and, hence, contribute to our modern lifestyle. Their growth rates are expected to be in line with GDP growth in future. This contrasts the significantly lower growth rates of the primary sources for aromatics - fuel processing and steam cracking of naphtha fractions. A supply gap can be expected to open up in future for which creative solutions will be required. (orig.)

  3. Living in poverty in America today.

    Science.gov (United States)

    Holosko, Michael J; Feit, Marvin D

    2005-01-01

    No statistician, social scientist or tarot card reader is needed to attest that the gap between the rich and poor in America is increasing. Further, most Americans don't care that much about it. There are also more rich people today living in the U.S. and there are more people living in poverty. Between 2000 and 2002, the number of Americans living in poverty increased by nearly 3 million to 34.6 million. Of these, 12% (or about one half a million persons) are living extreme poverty and many are children, with 16.7% likely to be poor (National Association of Social Workers, 2003).

  4. Effects of previous legislation on gondominium today

    OpenAIRE

    Karlovšek, Gašper

    2016-01-01

    The need to set up condominium arose with the beginning of mass construction of multi-apartment buildings. In Slovenia, condominium has been governed by law since the middle of the 20th century. The integral system is quite complex and is today regulated within two basic registers i.e. land register and cadaster of buildings. The registration of condominium into public real estate registers in Slovenia has been systematically regulated since 1976, when the E-book i.e. the book of condominium ...

  5. Uterine Prolapse: From Antiquity to Today

    Science.gov (United States)

    Downing, Keith T.

    2012-01-01

    Uterine prolapse is a condition that has likely affected women for all of time as it is documented in the oldest medical literature. By looking at the watershed moments in its recorded history we are able to appreciate the evolution of urogynecology and to gain perspective on the challenges faced by today's female pelvic medicine and reconstructive surgeons in their attempts to treat uterine and vaginal vault prolapse. “He who cannot render an account to himself of at least three thousand years of time, will always grope in the darkness of inexperience” —Goethe, Translation of Panebaker PMID:22262975

  6. [New technologies and nursing. Use and perception of primary health care nurses about electronic health record].

    Science.gov (United States)

    Galimany Masclans, Jordi; Garrido Aguilar, Eva; Roca Roger, Montse; Girbau García, M Rosa

    2012-09-01

    To analyze the nurses make use of electronic health records (EHR) and assess their perception of it. A descriptive cross-sectional observational study was conducted in 2010 analyzing the nurses' perceptions of adult and pediatric consultations of primary health care teams in Baix Llobregat (Catalonia) in which the EHR is used. The study variables were: registration of care, continuity of care, training, usability and sociodemographic composition of the sample. The statistical analysis was descriptive. Nurses agree that EHR provides "continuity of care" in relation to nursing care (mean 2.03, Sd.0.83) and overall (mean 2.19, 5d.0.83). Show indifference to the "usability" of the EHR (mean 3.26, Sd.0.5), to facilitate the "record information" (mean 2.69, Sd.0.68) and the need for "training" in the use of EHR (mean 2.6, 5d.0.59). It has been found that with increasing age of the nurse, it shows more agreement that the EHR provides greater continuity of care overall. The average ratings of the continuum of care nurse, recording of information, continuity of care in general are greater the lead time using the EHR. The nurses' perceptions regarding the EHR are positive in that it provides continuity of care and to exchange information on patient health data.

  7. Electron multibeam technology for mask and wafer writing at 0.1 nm address grid

    Science.gov (United States)

    Platzgummer, Elmar; Klein, Christof; Loeschner, Hans

    2013-07-01

    IMS Nanofabrication realized a 50 keV electron multibeam proof-of-concept (POC) tool confirming writing principles with 0.1 nm address grid and lithography performance capability. The POC system achieves the predicted 5 nm 1 sigma blur across the 82 μm×82 μm array of 512×512 (262,144) programmable 20 nm beams. 24-nm half pitch (HP) has been demonstrated and complex patterns have been written in scanning stripe exposure mode. The first production worthy system for the 11-nm HP mask node is scheduled for 2014 (Alpha), 2015 (Beta), and first-generation high-volume manufacturing multibeam mask writer (MBMW) tools in 2016. In these MBMW systems the max beam current through the column is 1 μA. The new architecture has also the potential for 1× mask (master template) writing. Substantial further developments are needed for maskless e-beam direct write (EBDW) applications as a beam current of >2 mA is needed to achieve 100 wafer per hour industrial targets for 300 mm wafer size. Necessary productivity enhancements of more than three orders of magnitude are only possible by shrinking the multibeam optics such that 50 to 100 subcolumns can be placed on the area of a 300 mm wafer and by clustering 10 to 20 multicolumn tools. An overview of current EBDW efforts is provided.

  8. Product assurance technology for procuring reliable, radiation-hard, custom LSI/VLSI electronics

    Science.gov (United States)

    Buehler, M. G.; Allen, R. A.; Blaes, B. R.; Hicks, K. A.; Jennings, G. A.; Lin, Y.-S.; Pina, C. A.; Sayah, H. R.; Zamani, N.

    1989-01-01

    Advanced measurement methods using microelectronic test chips are described. These chips are intended to be used in acquiring the data needed to qualify Application Specific Integrated Circuits (ASIC's) for space use. Efforts were focused on developing the technology for obtaining custom IC's from CMOS/bulk silicon foundries. A series of test chips were developed: a parametric test strip, a fault chip, a set of reliability chips, and the CRRES (Combined Release and Radiation Effects Satellite) chip, a test circuit for monitoring space radiation effects. The technical accomplishments of the effort include: (1) development of a fault chip that contains a set of test structures used to evaluate the density of various process-induced defects; (2) development of new test structures and testing techniques for measuring gate-oxide capacitance, gate-overlap capacitance, and propagation delay; (3) development of a set of reliability chips that are used to evaluate failure mechanisms in CMOS/bulk: interconnect and contact electromigration and time-dependent dielectric breakdown; (4) development of MOSFET parameter extraction procedures for evaluating subthreshold characteristics; (5) evaluation of test chips and test strips on the second CRRES wafer run; (6) two dedicated fabrication runs for the CRRES chip flight parts; and (7) publication of two papers: one on the split-cross bridge resistor and another on asymmetrical SRAM (static random access memory) cells for single-event upset analysis.

  9. Guest Editorial Brain-Computer Interface: Today and Tomorrow

    Institute of Scientific and Technical Information of China (English)

    De-Zhong Yao

    2009-01-01

    @@ As the invited editor of this special issue on brain- computer nterface (BCI), I am pleased to give a comment on the state-of-the-art with the introduction of recent advances made at the Chengdu BCI Group, University of Electronic Science and Technology of China (UESTC).

  10. Electronic technology of mosquitoes control and repelling%电子驱灭蚊蝇技术的研究

    Institute of Scientific and Technical Information of China (English)

    王钧; 陈明媛

    2013-01-01

      蚊蝇等害虫对人类的健康构成了危害。蚊香、灭蚊剂等传统的驱灭蚊子方法不仅使它们产生了抗药性,而且会造成环境污染[1]。本文通过分析蚊子的生活特性,利用现代电子技术、仿生学和物理技术等非化学方法实现了绿色驱灭蚊子。经实验研究,该方法比传统的方法更加环保、高效。%Pests such as mosquitoes are harm to human's health. Driving and killing mosquitoes by mosquito-repellent incense and anopheline in the traditional ways not only cause their developed resistance, and will cause environmental pollution [1]. Through analysis of the characteristics of mosquitoes, the modern electronic technology, bionics and physical technology, not chemical methods, have been realized controlling and repelling mosquitoes. After experimental research, the idea is better than the traditional method, with more environmental protection, high efficiency.

  11. The CMS fast beams condition monitor back-end electronics based on MicroTCA technology: status and development

    Science.gov (United States)

    Zagozdzinska, Agnieszka A.; Dabrowski, Anne E.; Pozniak, Krzysztof T.

    2015-09-01

    The Fast Beams Condition Monitor (BCM1F), upgraded for LHC Run II, is used to measure the online luminosity and machine induced background for the CMS experiment. The detector consists of 24 single-crystal CVD diamond sensors that are read out with a custom fast front-end chip fabricated in 130 nm CMOS technology. Since the signals from the sensors are used for real time monitoring of the LHC conditions they are processed by dedicated back-end electronics to measure separately rates corresponding to LHC collision products, machine induced background and residual activation exploiting different arrival times. The system is built in MicroTCA technology and uses high speed analog-to-digital converters. In operational modes of high rates, consecutive events, spaced in time by less than 12.5 ns, may cause partially overlapping events. Hence, novel signal processing techniques are deployed to resolve overlapping peaks. The high accuracy qualification of the signals is crucial to determine the luminosity and the machine induced background rates for the CMS experiment and the LHC.

  12. Electronic Government and Electronic Participation

    NARCIS (Netherlands)

    Tambouris, E.; Scholl, H.J.; Janssen, M.F.W.H.A.; Wimmer, M.A.; Tarabanis, K.; Gascó, M.; Klievink, A.J.; Lindgren, I.; Milano, M.; Panagiotopoulos, P.; Pardo, T.A.; Parycek, P.; Sæbø, O.

    2015-01-01

    Electronic government and electronic participation continue to transform the public sector and society worldwide and are constantly being transformed themselves by emerging information and communication technologies. This book presents papers from the 14th International Federation for Information P

  13. Big Data, the perfect instrument to study today's consumer behavior

    Directory of Open Access Journals (Sweden)

    Cristina STOICESCU

    2016-01-01

    Full Text Available Consumer behavior study is a new, interdisciplinary and emerging science, developed in the 1960s. Its main sources of information come from economics, psychology, sociology, anthropology and artificial intelligence. If a century ago, most people were living in small towns, with limited possibilities to leave their community, and few ways to satisfy their needs, now, due to the accelerated evolution of technology and the radical change of life style, consumers begin to have increasingly diverse needs. At the same time the instruments used to study their behavior have evolved, and today databases are included in consumer behavior research. Throughout time many models were developed, first in order to analyze, and later in order to predict the consumer behavior. As a result, the concept of Big Data developed, and by applying it now, companies are trying to understand and predict the behavior of their consumers.

  14. The use of electronic mail at the reference desk: impact of a computer-mediated communication technology on librarian-client interactions.

    Science.gov (United States)

    Schilling-Eccles, K; Harzbecker, J J

    1998-01-01

    Commonly recognized computer-mediated communication (CMC) tools include virtual environments, bibliographic databases, listservers, newsgroups, group teleconferencing, interactive messaging systems and electronic mail. The use of these technologies in libraries has grown exponentially over the past decade. Electronic mail has emerged as an especially popular communication tool for librarians, and their colleagues and patrons. This paper explores the use of a reference department electronic mail service and its impact on reference services and librarian-client interactions. Several issues related to the implementation of CMC technologies are presented, including the maintenance and monitoring of reference electronic mail systems, the types of questions that are typically posted, and potential barriers to the implementation and use of reference e-mail.

  15. Today's Leaders for a Sustainable Tomorrow

    Energy Technology Data Exchange (ETDEWEB)

    Wood, Bryan [Audubon Center of the North Woods, Inc., Sandstone, MN (United States)

    2013-02-27

    Today's Leaders for a Sustainable Tomorrow is a collaboration of five residential environmental learning centers (Audubon Center of the North Woods, Deep Portage Learning Center, Laurentian Environmental Center, Long Lake Conservation Center and Wolf Ridge Environmental Learning Center) that together increased energy efficiency, energy conservation and renewable energy technologies through a number of different means appropriate for each unique center. For energy efficiency upgrades the centers installed envelope improvements to seal air barriers through better insulation in walls, ceilings, windows, doors as well as the installation of more energy efficient windows, doors, lighting and air ventilation systems. Through energy sub-meter monitoring the centers are able to accurately chart the usage of energy at each of their campuses and eliminate unnecessary energy usage. Facilities reduced their dependence on fossil fuel energy sources through the installation of renewable energy technologies including wood gasification, solar domestic hot water, solar photovoltaic, solar air heat, geothermal heating and wind power. Centers also installed energy education displays on the specific renewable energy technologies used at the center.

  16. Ethics Today: Are Our Principles Still Relevant?

    Science.gov (United States)

    Garnar, Martin

    2015-01-01

    In 1939 technological advances included the first handheld electric slicing knife, the first mass-produced helicopter, and the first transmission of a picture via a cable system (Science and Technology 2001). That year also saw the first Code of Ethics adopted by the American Library Association (ALA OIF 2010, 311). Can an ethical code first…

  17. 电子封装中各向异性导电胶的可靠性%Reliability aspects of electronics packaging technology using anisotropic conductive adhesives

    Institute of Scientific and Technical Information of China (English)

    刘建影; 路秀真; 曹立强

    2007-01-01

    Anisotropic conductive adhesive technology for electronics packaging and interconnect application has significantly been developed during the last few years. It is time to make a summary of what has been done in this field. The present paper reviews the technology development, especially from the reliability point of view. It is pointed out that anisotropic conductive adhesives are now widely used in many applications and the reliability data and models have been developed to a large extent for anisotropic conductive adhesives in various applications.

  18. ETI, SETI and today's public opinion

    Science.gov (United States)

    Pinotti, Roberto

    During the last three decades the general public's initial opinions about ETI and SETI changed, turning ignorance, fear and superficiality into a gradual understanding of the importance of these concepts. After a brief analysis of this changing psycho-sociological attitude, the paper provides an "estimate of the situation" about general interest for ETI and SETI, suggesting a growing awareness in today's public opinion. Science fiction movies like Close Encounters of the Third Kind and E.T. the Extra-Terrestrial and popular interest in UFOs as visitors from outer space played a major role in the average man's acceptance of the reality of extra-terrestrial life and its meaning for mankind.

  19. Liver transplantation:Yesterday,today and tomorrow

    Institute of Scientific and Technical Information of China (English)

    Osman Abbasoglu

    2008-01-01

    With the advances in technical skills,management of postoperative complications and improvements in immunosuppressive drugs,liver transplantation is the standard treatment for many patients with chronic liver disease.Today,shortage of donor organs seems to be the major limiting factor for the application of liver transplantation.This review focuses on five issues that are challenging to clinical practice of liver transplantation and relevant to gastroenterologists.These include living donor liver transplantation,recurrent viral hepatitis,non-heart-beating donors,hepatocellular carcinoma,and ABO incompatible livertransplantation.Living donor and non-heart beating donor transplantations were initiated as a solution to increase the donor organ pool and it is expected that there will be an increase in the number of these donors.Recurrent hepatitis C and hepatocellular carcinoma following liver transplantation are among major problems and ongoing research in these diseases may lead to better outcomes in these recipients.

  20. Enteric neuropathies: Yesterday, Today and Tomorrow.

    Science.gov (United States)

    De Giorgio, Roberto; Bianco, Francesca; Latorre, Rocco; Caio, Giacomo; Clavenzani, Paolo; Bonora, Elena

    2016-01-01

    Enteric neuropathy is a term indicating an impairment of the innervation supplying the gastrointestinal tract. The clinical phenotypes of the enteric neuropathies are the 'tip of the iceberg' of severe functional digestive diseases, such as intestinal pseudo-obstruction syndromes (e.g., chronic intestinal pseudo-obstruction). Despite progress acquired over the years, the pathogenetic mechanisms leading to enteric neuropathies are still far from being elucidated and the therapeutic approaches to these patients are mainly supportive, rather than curative.The purpose of this chapter is to review the advancements that have been done in the knowledge of enteric neuropathies identified in adult patients ('tomorrow'), going through where we currently are ('today') following a brief history of the major milestones on the pioneering discoveries in the field ('yesterday').