WorldWideScience

Sample records for technology support units

  1. Government financial support for civil aircraft research, technology and development in four European countries and the United States

    Science.gov (United States)

    Chandler, B.; Golaszewski, R.; Patten, C.; Rudman, B.; Scott, R.

    1980-01-01

    Data on the levels of government financial support for civil aircraft airframe and engine (CAAE) research and technology (R&T) in the United States and Europe (United Kingdom, West Germany, France and The Netherlands) and means of comparing these levels are provided. Data are presented for the years 1974-1977. European R&T expenditure data were obtained through visits to each of the four European countries, to the Washington office of the European Communities, and by a search of applicable literature. CAAE R&T expenditure data for the United States were obtained from NASA and Federal Aviation Administration (FAA).

  2. United States Supports Distributed Wind Technology Improvements; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    Sinclair, Karin

    2015-06-15

    This presentation provides information on the activities conducted through the Competitiveness Improvement Project (CIP), initiated in 2012 by the U.S. Department of Energy (DOE) and executed through the National Renewable Energy Laboratory (NREL) to support the distributed wind industry. The CIP provides research and development funding and technical support to improve distributed wind turbine technology and increase the competitiveness of U.S. small and midsize wind turbine manufacturers. Through this project, DOE/NREL assists U.S. manufacturers to lower the levelized cost of energy of wind turbines through component improvements, manufacturing process upgrades, and turbine testing. Ultimately, this support is expected to lead to turbine certification through testing to industry-recognized wind turbine performance and safety standards.

  3. Governing new technology: A comparative analysis of government support for nanotechnology in the Netherlands and the United States

    Science.gov (United States)

    Eijmberts, Johannes

    This study examines this variance in national government support for nanotechnology---its shape, size, and policy priorities---by comparing the United States and the Netherlands. Our operating hypothesis is that national government support for nanotechnology development is driven not by the intrinsic nature of the technology but by longstanding structural and institutional arrangements. That is, in the U.S., pluralist political traditions and reliance on classical liberal market economics would suggest a detached national government approach, leaving any initiative to market actors. At the same time, legacies of corporatism in the Dutch political system and a tradition of greater direct government involvement in the national economy would suggest a government-led policy on nanotechnology development. The findings show otherwise. Early on, the U.S. government established the National Nanotechnology Initiative, an overarching federal mechanism to promote and coordinate nanotechnology development. Yet, despite its appearance of central direction and coordination, the NNI reflected pluralist arrangements by leaving ample autonomy for participating federal departments and agencies. The creation of the NNI was driven particularly by concerns of about foreign challenges to American global leadership in science and technology. In the Netherlands, by contrast, the path taken shows the legacy of Dutch corporatist practice---slow, incremental, and embedded in pre-existing institutional arrangements. The Dutch government initially took no directive role, relying instead on established links among universities, public research funding organizations, and industries to advance nanotechnology development in the Netherlands. However, over time, Dutch government involvement in nanotechnology grew to be more supportive, sizeable, comprehensive, and directive---particulary by requiring substantial investments in risk-related research as a condition for public funding and, notably, by

  4. United States advanced technologies

    International Nuclear Information System (INIS)

    Longenecker, J.R.

    1985-01-01

    In the United States, the advanced technologies have been applied to uranium enrichment as a means by which it can be assured that nuclear fuel cost will remain competitive in the future. The United States is strongly committed to the development of advanced enrichment technology, and has brought both advanced gas centrifuge (AGC) and atomic vapor laser isotope separation (AVLIS) programs to a point of significant technical refinement. The ability to deploy advanced technologies is the basis for the confidence in competitive future price. Unfortunately, the development of advanced technologies is capital intensive. The year 1985 is the key year for advanced technology development in the United States, since the decision on the primary enrichment technology for the future, AGC or AVLIS, will be made shortly. The background on the technology selection process, the highlights of AGC and AVLIS programs and the way to proceed after the process selection are described. The key objective is to maximize the sales volume and minimize the operating cost. This will help the utilities in other countries supply low cost energy on a reliable, long term basis. (Kako, I.)

  5. Support for Development of Electronics and Materials Technologies by the Governments of the United States, Japan, West Germany, France, and the United Kingdom.

    Science.gov (United States)

    General Accounting Office, Washington, DC.

    The governments of the United States, Japan, West Germany, France, and the United Kingdom each have large research and development efforts involving government agencies, universities and industry. This document provides a comparative overview of policies and programs which contribute to the development of technologies in the general area of…

  6. Emergency Preparedness technology support to the Health and Safety Executive (HSE), Nuclear Installations Inspectorate (NII) of the United Kingdom

    International Nuclear Information System (INIS)

    O'Kula, K.R.

    1994-03-01

    The Nuclear Installations Inspectorate (NII) of the United Kingdom (UK) suggested the use of an accident progression logic model method developed by Westinghouse Savannah River Company (WSRC) and Science Applications International Corporation (SAIC) for K Reactor to predict the magnitude and timing of radioactivity releases (the source term) based on an advanced logic model methodology. Predicted releases are output from the personal computer-based model in a level-of-confidence format. Additional technical discussions eventually led to a request from the NII to develop a proposal for assembling a similar technology to predict source terms for the UK's advanced gas-cooled reactor (AGR) type. To respond to this request, WSRC is submitting a proposal to provide contractual assistance as specified in the Scope of Work. The work will produce, document, and transfer technology associated with a Decision-Oriented Source Term Estimator for Emergency Preparedness (DOSE-EP) for the NII to apply to AGRs in the United Kingdom. This document, Appendix A is a part of this proposal

  7. CSPMS supported by information technology

    Science.gov (United States)

    Zhang, Hudan; Wu, Heng

    This paper will propose a whole new viewpoint about building a CSPMS(Coal-mine Safety Production Management System) by means of information technology. This system whose core part is a four-grade automatic triggered warning system achieves the goal that information transmission will be smooth, nondestructive and in time. At the same time, the system provides a comprehensive and collective technology platform for various Public Management Organizations and coal-mine production units to deal with safety management, advance warning, unexpected incidents, preplan implementation, and resource deployment at different levels. The database of this system will support national related industry's resource control, plan, statistics, tax and the construction of laws and regulations effectively.

  8. Application Technology Research Unit

    Data.gov (United States)

    Federal Laboratory Consortium — To conduct fundamental and developmental research on new and improved application technologies to protect floricultural, nursery, landscape, turf, horticultural, and...

  9. Staffing Up for Technology Support.

    Science.gov (United States)

    Carter, Kim

    2000-01-01

    Examines current technology staffing in school districts and compares technology-related roles with a similar study conducted in 1997. Discusses job titles; responsibilities; career paths; lack of technology support in schools; district-level support; teacher training; peer assistance; student roles; collaboration with library media specialists;…

  10. Technology support for participatory budgeting

    DEFF Research Database (Denmark)

    Rose, Jeremy; Rios, Jesus; Lippa, Barbara

    2010-01-01

    Participatory budgeting is a reasonably well-established governance practice, particularly in South America. It is information and communication rich - making it well suited for modern technology support; in addition, the widespread participation of many citizens is difficult to achieve without...... this support. Participatory budgeting is associated with eParticipation, where much is already known about the kinds of technologies supporting citizen participation and how they are used. This paper identifies (from the existing literature) basic processes which are common to most participatory budgeting......, is integrated with a purpose-built internet platform; here we use the analysis to understand how the internet-based technologies are used to support the various participatory budgeting processes. We identify a range of these technologies which are currently used to support different eParticipation activities...

  11. Uniting information technologies with studying language

    OpenAIRE

    Jovanov, Jane; Kirova, Snezana

    2010-01-01

    Do modern technologies allow as to advance the teaching process in studying foreign languages? We can already say with assurance that these technologies allow us twice as fast a pace of teaching thematic units. The application of modern software solutions in our teaching guarantees this with compatible hardware support for the promotion of those same software packages. Modeling and imitating original situations additionally enable us to recapture the originality of a language environment, cul...

  12. Technology to Support Motivational Interviewing.

    Science.gov (United States)

    Gance-Cleveland, Bonnie; Ford, Loretta C; Aldrich, Heather; Oetzel, Keri Bolton; Cook, Paul; Schmiege, Sarah; Wold, Mary

    This paper reports the findings of motivational interviewing (MI) training with and without technology support on school-based health center (SBHC) providers' satisfaction with MI training, providers' self-report of behavioral counseling related to childhood overweight/obesity, and parents' perception of care after training. The effects of training and technology on MI is part of a larger comparative effectiveness, cluster randomized trial. Twenty-four SBHCs in six states received virtual training on MI. Half the sites received HeartSmartKids™, a bilingual (English/Spanish), decision-support technology. The technology generated tailored patient education materials. Standard growth charts were plotted and health risks were highlighted to support MI counseling. The results of the MI training included provider satisfaction with MI training and parent assessment of the components of MI in their child's care. Providers and parents were surveyed at baseline, after training, and six months after training. Providers were satisfied with training and reported improvements in counseling proficiency (ptechnology group reported significant improvement in provider support for healthy eating (p=0.04). Virtual training has the potential of preparing providers to use MI to address childhood obesity. Technology improved parent support for healthy eating. Future research should evaluate the impact of technology to support MI on patient outcomes. Childhood obesity guidelines emphasize that MI should be used to promote healthy weight in children. Training providers on MI may help more providers incorporate obesity guidelines in their practice. Copyright © 2017 Elsevier Inc. All rights reserved.

  13. Manned maneuvering unit technology survey

    Science.gov (United States)

    Cook, G. V. O. (Editor)

    1975-01-01

    The preliminary design of the manned maneuvering unit (MMU) for the shuttle is investigated, and the current state of the art in certain technology areas that may find application on the operational EVA shuttle MMU is examined. Three broad areas of technology, namely: (1) mechanical energy storage - i.e., the practicality of utilizing the energy storage capability of either a reaction wheel or a control moment gyro, (2) numerical and alphanumerical displays, and (3) recent electronics developments such as microprocessors and integrated injection logic, were covered.

  14. Pressure vessel sliding support unit and system using the sliding support unit

    Science.gov (United States)

    Breach, Michael R.; Keck, David J.; Deaver, Gerald A.

    2013-01-15

    Provided is a sliding support and a system using the sliding support unit. The sliding support unit may include a fulcrum capture configured to attach to a support flange, a fulcrum support configured to attach to the fulcrum capture, and a baseplate block configured to support the fulcrum support. The system using the sliding support unit may include a pressure vessel, a pedestal bracket, and a plurality of sliding support units.

  15. Logistics Support of Naval Expeditionary Units

    National Research Council Canada - National Science Library

    Nilsen, Jan

    2004-01-01

    .... Based on literature from strategic management, logistics, and supply chain management, the research evaluates the existing theater logistics capabilities and the requirements of the supported expeditionary units...

  16. Assessment of Logistical Support for Expeditionary Units

    Science.gov (United States)

    2014-06-01

    18  Figure 8.  EDO Group Structure (from EODESU1, 2014). .............................................21  Figure 9.  NSW Command...NKO, 2014; EOD, 2012). 21 Figure 8. EDO Group Structure (from EODESU1, 2014). a. Mobile Units Mobile Units (EODMU) provide deployable command and...NKO, 2014). The expeditionary environment and mission add unique variables such as distinctive operating environment, staying current with technology

  17. Nuclear Systems (NS): Technology Demonstration Unit (TDU)

    Data.gov (United States)

    National Aeronautics and Space Administration — The Nuclear Systems Project demonstrates nuclear power technology readiness to support the goals of NASA's Space Technology Mission Directorate. To this end, the...

  18. Lunar Surface Systems Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Green, Jennifer L.; Chau, Savio N.; Curell, Philip C.; Dempsey, Cathy A.; Patterson, Linda P.; Robbins, William; Steele, Michael A.; DAnnunzio, Anthony; hide

    2011-01-01

    The Lunar Surface Systems Supportability Technology Development Roadmap is a guide for developing the technologies needed to enable the supportable, sustainable, and affordable exploration of the Moon and other destinations beyond Earth. Supportability is defined in terms of space maintenance, repair, and related logistics. This report considers the supportability lessons learned from NASA and the Department of Defense. Lunar Outpost supportability needs are summarized, and a supportability technology strategy is established to make the transition from high logistics dependence to logistics independence. This strategy will enable flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. The supportability roadmap defines the general technology selection criteria. Technologies are organized into three categories: diagnostics, test, and verification; maintenance and repair; and scavenge and recycle. Furthermore, "embedded technologies" and "process technologies" are used to designate distinct technology types with different development cycles. The roadmap examines the current technology readiness level and lays out a four-phase incremental development schedule with selection decision gates. The supportability technology roadmap is intended to develop technologies with the widest possible capability and utility while minimizing the impact on crew time and training and remaining within the time and cost constraints of the program.

  19. Hybrid Life Support System Technology Demonstrations

    Science.gov (United States)

    Morrow, R. C.; Wetzel, J. P.; Richter, R. C.

    2018-02-01

    Demonstration of plant-based hybrid life support technologies in deep space will validate the function of these technologies for long duration missions, such as Mars transit, while providing dietary variety to improve habitability.

  20. Sandia`s computer support units: The first three years

    Energy Technology Data Exchange (ETDEWEB)

    Harris, R.N. [Sandia National Labs., Albuquerque, NM (United States). Labs. Computing Dept.

    1997-11-01

    This paper describes the method by which Sandia National Laboratories has deployed information technology to the line organizations and to the desktop as part of the integrated information services organization under the direction of the Chief Information officer. This deployment has been done by the Computer Support Unit (CSU) Department. The CSU approach is based on the principle of providing local customer service with a corporate perspective. Success required an approach that was both customer compelled at times and market or corporate focused in most cases. Above all, a complete solution was required that included a comprehensive method of technology choices and development, process development, technology implementation, and support. It is the authors hope that this information will be useful in the development of a customer-focused business strategy for information technology deployment and support. Descriptions of current status reflect the status as of May 1997.

  1. Clinical unity and community empowerment: the use of smartphone technology to empower community management of chronic venous ulcers through the support of a tertiary unit.

    Directory of Open Access Journals (Sweden)

    Edel Marie Quinn

    Full Text Available BACKGROUND: Chronic ulcers affect roughly 60,000 Irish people, at a total cost of €600,000,000, or €10,000 per patient annually. By virtue of their chronicity, these ulcers also contribute a significant burden to tertiary outpatient vascular clinics. OBJECTIVE: We propose utilizing mobile phone technology to decentralise care from tertiary centres to the community, improving efficiency and patient satisfaction, while maintaining patient safety. METHODS: Bespoke mobile software was developed for Apples iPhone 4 platform. This allowed for the remote collection of patient images prospectively and their transmission with clinical queries, from the primary healthcare team to the tertiary centre. Training and iPhones were provided to five public health nurses in geographically remote areas of the region. Data were uploaded securely and user end software was developed allowing the review and manipulation of images, along with two way communication between the teams. Establishing reliability, patients were reviewed clinically as well as remotely, and concordance analysed. Qualitative data were collected through focus group discussion. RESULTS: From October to December 2011 eight patients (61-83 yrs, mean 75.3 yrs with chronic venous ulceration and their five public health nurses were recruited. Data were transmitted using 3 G, Edge, GPRS and WiFi, at a mean speed of 69.03 kps. Concordance was 100% for wound bed assessment, 80% for skin integrity/colour and 60% for exudate assessment. Focus group analysis explored the concept, practicalities and future applications of the system. CONCLUSIONS: With an evolving national data network, the secure transmission of clinical images is a safe alternative to regular clinic appointments for patients with chronic venous ulceration. With further development, and packaged as a freely downloadable application, this has the potential to support the community care of chronic wounds.

  2. Designing Corporate Databases to Support Technology Innovation

    Science.gov (United States)

    Gultz, Michael Jarett

    2012-01-01

    Based on a review of the existing literature on database design, this study proposed a unified database model to support corporate technology innovation. This study assessed potential support for the model based on the opinions of 200 technology industry executives, including Chief Information Officers, Chief Knowledge Officers and Chief Learning…

  3. iHealth: supporting health by technology

    NARCIS (Netherlands)

    Ossebaard, Hans Cornelis

    2012-01-01

    This thesis is about how people support their health through the use of technology. It focuses on web-based information and communication technology (ICT). Many factors play a role in the interaction between people, technology and context. In five studies we have investigated a few of them. The

  4. United States Air Force Computer-Aided Acquisition and Logistics Support (CALS) Evolution of Computer Integrated Manufacturing (CIM) Technologies. Version 2.0 Draft

    Science.gov (United States)

    1988-11-01

    During the past decade a great deal of effort has been focused on the advantages computerization can bring to engineering design and production activities. This is seen in such developments as Group Technology (GT), Manufacturing Resource Planning (M...

  5. Technologies to support industrial processes

    International Nuclear Information System (INIS)

    Palazzi, G.; Savelli, D.

    1989-05-01

    Control and measuring techniques applied to industry have the common aim of increasing safety, reliability and plant availability. The industrial monitoring system needs a lot of sensors, whose signals, elaborated and interpreted, allow one to define the best working condition; moreover control instruments perform a diagnosis related to damages and breakages. The Experimental Engineering Division of ENEA's Thermal Reactor Department has developed sensors and measuring apparatus and has acquired advanced control techniques. All these systems, containing an original software, have been applied to industrial process problems and/or to experimental facilities both to increase reliability and to understand better process physics. Division activities are grouped in four sectors: non-destructive examinations (ultrasonic, eddy current, thermography, holographic interpherometry, penetrant liquids and magnetoscopy); innovative sensors (heated thermocouples, optical fiber sensors); advanced measuring systems (laser technology for fluidodynamic measures, nuclear radiation techniques, infrared measuring, mass spectrometer, hot-film anemometer, chromatographic apparatus); advanced technologies for diagnosis and signal analysis (digital image processing, statistical analysis). (author)

  6. Health technology assessment in the United Kingdom.

    Science.gov (United States)

    Woolf, S H; Henshall, C

    2000-01-01

    The National Health Service (NHS) provides universal health coverage for all British citizens. Most services are free of charge, although modest copayments are sometimes applied. About 11% of the population also has private insurance. General practitioners, generally the first point of contact for accessing the system, are independent contractors who serve as gatekeepers for specialist and hospital services and enjoy substantial clinical autonomy. Hospitals are public and are regionalized, but the 1990 reforms made them self-governing trusts that contract with local purchasers (health authorities and general practitioner fundholders). Reforms beginning in 1990 moved the NHS away from a centralized administrative structure to more pluralistic arrangements in which competition, as well as management, influences how services develop. Health technology and health technology assessment (HTA) have gained increasing attention in the NHS during this period, as part of a wider NHS Research and Development (R&D) Strategy. The strategy promotes a knowledge-based health service with a strong research infrastructure and the capacity to critically review its own needs. HTA is the largest and most developed of the programs within the strategy. It has a formal system for setting assessment priorities involving widespread consultation within the NHS, and a National Co-ordinating Centre for Health Technology Assessment. The strategy supports related centers such as the U.K. Cochrane Centre and the NHS Centre for Reviews and Dissemination. A hallmark of the HTA program is strong public participation. The United Kingdom has made a major commitment to HTA and to seeking effective means of reviewing and disseminating evidence.

  7. A dedicated fund supports technological innovation

    CERN Multimedia

    Katarina Anthony

    2010-01-01

    The Knowledge and Technology Transfer (KTT) Group is calling on CERN Departments to take their technology out of the confines of the laboratory and make it ready for dissemination. For the first time, projects can apply for financial support from the newly established KTT Fund.   Scientific inquiry can lead to unexpected developments for society when researchers apply their expertise for public use. CERN actively encourages this transfer of knowledge and technology and, for the first time, has created a dedicated fund to provide financial support to projects aiming at disseminating their technologies to external audiences. CERN’s technology transfer schemes were formalised in the recent Policy on the Management of Intellectual Property in Technology Transfer, approved in March. Revenues generated by commercial exploitation will be distributed between the members of the team that developed the technology, their Department, and the KTT Fund for reinvestment in further KTT projects. &qu...

  8. Integrating Geospatial Technologies in an Energy Unit

    Science.gov (United States)

    Kulo, Violet A.; Bodzin, Alec M.

    2011-01-01

    This article presents a design-based research study of the implementation of an energy unit developed for middle school students. The unit utilized Google Earth and a geographic information system (GIS) to support student understanding of the world's energy resources and foster their spatial thinking skills. Findings from the prototype study…

  9. International technology identification, transfer, and program support

    International Nuclear Information System (INIS)

    Kitchen, B.

    1993-01-01

    Savannah River Site (SRS) activities primarily address vitrification technologies being investigated with Japan and the former Soviet Union (FSU). They also support the overall management of EM's international activities

  10. Decision support software technology demonstration plan

    Energy Technology Data Exchange (ETDEWEB)

    SULLIVAN,T.; ARMSTRONG,A.

    1998-09-01

    The performance evaluation of innovative and alternative environmental technologies is an integral part of the US Environmental Protection Agency's (EPA) mission. Early efforts focused on evaluating technologies that supported the implementation of the Clean Air and Clean Water Acts. In 1986 the Agency began to demonstrate and evaluate the cost and performance of remediation and monitoring technologies under the Superfund Innovative Technology Evaluation (SITE) program (in response to the mandate in the Superfund Amendments and Reauthorization Act of 1986 (SARA)). In 1990, the US Technology Policy was announced. This policy placed a renewed emphasis on making the best use of technology in achieving the national goals of improved quality of life for all Americans, continued economic growth, and national security. In the spirit of the technology policy, the Agency began to direct a portion of its resources toward the promotion, recognition, acceptance, and use of US-developed innovative environmental technologies both domestically and abroad. Decision Support Software (DSS) packages integrate environmental data and simulation models into a framework for making site characterization, monitoring, and cleanup decisions. To limit the scope which will be addressed in this demonstration, three endpoints have been selected for evaluation: Visualization; Sample Optimization; and Cost/Benefit Analysis. Five topics are covered in this report: the objectives of the demonstration; the elements of the demonstration plan; an overview of the Site Characterization and Monitoring Technology Pilot; an overview of the technology verification process; and the purpose of this demonstration plan.

  11. Sensor technology more than a support.

    Science.gov (United States)

    Olsson, Anna; Persson, Ann-Christine; Bartfai, Aniko; Boman, Inga-Lill

    2018-03-01

    This interview study is a part of a project that evaluated sensor technology as a support in everyday activities for patients with memory impairment. To explore patients with memory impairment and their partners' experiences of using sensor technology in their homes. Five patients with memory impairment after stroke and three partners were interviewed. Individual semi-structured interviews were analyzed with qualitative content analysis. Installing sensor technology with individually prerecorded voice reminders as memory support in the home had a broad impact on patients' and their families' lives. These effects were both positive and negative. The sensor technology not only supported activities but also influenced the patients by changing behavior, providing a sense of security, independence and increased self-confidence. For the partners, the sensor technology eased daily life, but also gave increased responsibility for maintenance. Technical problems led to frustration and stress for the patients. The results indicate that sensor technology has potential to increase opportunities for persons with memory impairment to perform and participate in activities and to unburden their partners. The results may promote an understanding of how sensor technology can be used to support persons with memory impairment in their homes.

  12. Using technology to support science inquiry learning

    Directory of Open Access Journals (Sweden)

    P John Williams

    2017-03-01

    Full Text Available This paper presents a case study of a teacher’s experience in implementing an inquiry approach to his teaching over a period of two years with two different classes. His focus was on using a range of information technologies to support student inquiry learning. The study demonstrates the need to consider the characteristics of students when implementing an inquiry approach, and also the influence of the teachers level of understanding and related confidence in such an approach. The case also indicated that a range of technologies can be effective in supporting student inquiry learning.

  13. Toward a Technology of "Nonaversive" Behavioral Support

    Science.gov (United States)

    Horner, Robert H.; Dunlap, Glen; Koegel, Robert L.; Carr, Edward G.; Sailor, Wayne; Anderson, Jacki; Albin, Richard W.; O'Neill, Robert E.

    2005-01-01

    Nonaversive behavior management is an approach to supporting people with undesirable behaviors that integrates technology and values. Although this approach has attracted numerous proponents, more adequate definition and empirical documentation are still needed. This article presents an introduction to the nonaversive approach. Important…

  14. Telescience and payload control support technologies

    Science.gov (United States)

    Donzelli, P.; Macavero, E.

    1988-10-01

    Technological options and their utilization scenarios for telescience implementation in manned space stations are outlined. On board and ground based data acquisition systems (SIMD and MIMD architecture, digital signal processing); and real time knowledge based systems to support principal investigators and payload specialists are discussed.

  15. Supporting women's leadership in science, technology, and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    A cutting-edge CA$15 million fellowships program, jointly funded by the Swedish International Development Cooperation Agency and IDRC, will support 140 doctoral and 60 early career women scientists in low and middle-income countries (LMICs) in the fields of science, technology, engineering, and mathematics.

  16. Technology development activities supporting tank waste remediation

    International Nuclear Information System (INIS)

    Bonner, W.F.; Beeman, G.H.

    1994-06-01

    This document summarizes work being conducted under the U.S. Department of Energy's Office of Technology Development (EM-50) in support of the Tank Waste Remediation System (TWRS) Program. The specific work activities are organized by the following categories: safety, characterization, retrieval, barriers, pretreatment, low-level waste, and high-level waste. In most cases, the activities presented here were identified as supporting tank remediation by EM-50 integrated program or integrated demonstration lead staff and the selections were further refined by contractor staff. Data sheets were prepared from DOE-HQ guidance to the field issued in September 1993. Activities were included if a significant portion of the work described provides technology potentially needed by TWRS; consequently, not all parts of each description necessarily support tank remediation

  17. Computational Support for Technology- Investment Decisions

    Science.gov (United States)

    Adumitroaie, Virgil; Hua, Hook; Lincoln, William; Block, Gary; Mrozinski, Joseph; Shelton, Kacie; Weisbin, Charles; Elfes, Alberto; Smith, Jeffrey

    2007-01-01

    Strategic Assessment of Risk and Technology (START) is a user-friendly computer program that assists human managers in making decisions regarding research-and-development investment portfolios in the presence of uncertainties and of non-technological constraints that include budgetary and time limits, restrictions related to infrastructure, and programmatic and institutional priorities. START facilitates quantitative analysis of technologies, capabilities, missions, scenarios and programs, and thereby enables the selection and scheduling of value-optimal development efforts. START incorporates features that, variously, perform or support a unique combination of functions, most of which are not systematically performed or supported by prior decision- support software. These functions include the following: Optimal portfolio selection using an expected-utility-based assessment of capabilities and technologies; Temporal investment recommendations; Distinctions between enhancing and enabling capabilities; Analysis of partial funding for enhancing capabilities; and Sensitivity and uncertainty analysis. START can run on almost any computing hardware, within Linux and related operating systems that include Mac OS X versions 10.3 and later, and can run in Windows under the Cygwin environment. START can be distributed in binary code form. START calls, as external libraries, several open-source software packages. Output is in Excel (.xls) file format.

  18. Supporting Project Work with Information Technology

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2015-01-01

    Like so many other institutions, Roskilde University has had to adapt to the new realities brought about by the rapid developments in information and communication technology (ICT). On the whole, ICT tools have proven to be helpful in supporting and developing the work forms on which Roskilde...... University problem-oriented project work is based. However, in implementing and integrating the new technologies in academic practices, a number of challenges have had to be addressed. This chapter discusses four of these challenges. The first is to provide a physical and virtual framework for learning...

  19. The United Nations Human Space Technology Initiative

    Science.gov (United States)

    Balogh, Werner; Miyoshi, Takanori

    2016-07-01

    The United Nations Office for Outer Space Affairs (OOSA) launched the Human Space Technology Initiative (HSTI) in 2010 within the United Nations Programme on Space Applications, based on relevant recommendations of the Third United Nations Conference on the Exploration and Peaceful Uses of Outer Space (UNISPACE III). The activities of HSTI are characterized by the following "Three Pillars": International Cooperation, Outreach, and Capacity-building. For International Cooperation, OOSA and the Japan Aerospace Exploration Agency (JAXA) jointly launched a new programme entitled "KiboCUBE". KiboCUBE aims to provide educational or research institutions located in developing countries with opportunities to deploy cube satellites of their own design and manufacture from Japanese Experiment Module "Kibo" on-board the International Space Station (ISS). The Announcement of Opportunity was released on 8 September 2015 and the selected institution is to be announced by 1 August 2016. OOSA is also collaborating with WHO and with the COPUOS Expert Group on Space and Global Health to promote space technologies and ground- and space-based research activities that can contribute to improving global health. For Outreach, OOSA and the government of Costa Rica are jointly organising the United Nations/Costa Rica Workshop on Human Space Technology from 7 to 11 March 2016. Participants will exchange information on achievements in human space programmes and discuss how to promote international cooperation by further facilitating the participation of developing countries in human space exploration-related activities. Also, it will address the role of space industries in human space exploration and its related activities, considering that they have become significant stakeholders in this field. For Capacity-building, OOSA has been carrying out two activities: the Zero-Gravity Instrument Project (ZGIP) and the Drop Tower Experiment Series (DropTES). In ZGIP, OOSA has annually distributed

  20. Assistive technology for memory support in dementia.

    Science.gov (United States)

    Van der Roest, Henriëtte G; Wenborn, Jennifer; Pastink, Channah; Dröes, Rose-Marie; Orrell, Martin

    2017-06-11

    The sustained interest in electronic assistive technology in dementia care has been fuelled by the urgent need to develop useful approaches to help support people with dementia at home. Also the low costs and wide availability of electronic devices make it more feasible to use electronic devices for the benefit of disabled persons. Information Communication Technology (ICT) devices designed to support people with dementia are usually referred to as Assistive Technology (AT) or Electronic Assistive Technology (EAT). By using AT in this review we refer to electronic assistive devices. A range of AT devices has been developed to support people with dementia and their carers to manage their daily activities and to enhance safety, for example electronic pill boxes, picture phones, or mobile tracking devices. Many are commercially available. However, the usefulness and user-friendliness of these devices are often poorly evaluated. Although reviews of (electronic) memory aids do exist, a systematic review of studies focusing on the efficacy of AT for memory support in people with dementia is lacking. Such a review would guide people with dementia and their informal and professional carers in selecting appropriate AT devices. Primary objectiveTo assess the efficacy of AT for memory support in people with dementia in terms of daily performance of personal and instrumental activities of daily living (ADL), level of dependency, and admission to long-term care. Secondary objectiveTo assess the impact of AT on: users (autonomy, usefulness and user-friendliness, adoption of AT); cognitive function and neuropsychiatric symptoms; need for informal and formal care; perceived quality of life; informal carer burden, self-esteem and feelings of competence; formal carer work satisfaction, workload and feelings of competence; and adverse events. We searched ALOIS, the Specialised Register of the Cochrane Dementia and Cognitive Improvement Group (CDCIG), on 10 November 2016. ALOIS is

  1. Technologies in support of CANDU development

    International Nuclear Information System (INIS)

    Turner, C.; Tapping, B.

    2005-01-01

    Atomic Energy of Canada, Ltd. (AECL) has significant research and development (R and D) programs designed to meet the needs of both existing CANDU reactors and new and evolving CANDU plant designs. These R and D programs cover a wide range of technology, from chemistry and materials support through to inspection and life management tools. Emphasis is placed on effective technology development programs for fuel channels, feeders and steam generators to ensure their operation through design life, and beyond. This paper specifically addresses how the R and D has been applied in the production of longer-lived pressure tubes for the most recent CANDU 6 reactors, and how this technology forms the basis for the pressure tubes of the Advanced CANDU Reactor (ACR). Similarly, AECL has developed solutions for other critical components such as calandria tubes, feeder pipe and steam generators. The paper also discusses how the R and D knowledge has been integrated into aging management databases and health monitoring tools. Since 1997, AECL has been working with CANDU utilities on comprehensive and integrated CANDU Plant Life Management (PLiM) programs for successful and reliable plant operation through design life and beyond. AECL has developed and implemented an advanced chemistry monitoring and diagnostic system, called ChemAND which allows on-line access by the operators to current and past chemistry conditions enabling appropriate responses and facilitating planning of shutdown maintenance actions. An equivalent tool for monitoring, trending and diagnosing thermal and mechanical data has also been developed; this tool is called ThermAND. AECL is developing the Maintenance Information, Monitoring, and Control (MIMC) system, which provide information to the user for condition-based decision-making in maintenance. To enable more effective inspections, surveillance and data collection, AECL has developed unique one-off tooling to carry out unanticipated inspection and repair

  2. INNOVATIVE TECHNOLOGIES OF LOGISTICAL SUPPORT OF TROOPS

    Directory of Open Access Journals (Sweden)

    S. V. Myamlin

    2017-12-01

    Full Text Available Purpose. Comprehensive and uninterrupted logistical support of troops is considered one of the main factors of successful conduct of hostilities by any state. The logistics support system, created in peacetime, is intended for use in the course of a military company. It is the link between the front and the economy of the country, and at the same time, it is one of the important factors affecting the combat operation. According to experts, changes in the geopolitical and military-strategic situation in Europe resulted also changes in the armed forces of states, including their logistical support, which is undergoing changes and is developing under the direct influence of the military strategy, the achievement of whose goals it is intended to provide. All this necessitates the search for new, more effective ways of solving logistical problems in modern combat. This is true today, including for the Armed Forces of Ukraine. Therefore, the purpose of the work is to consider and implement in practice the logistic support of the state power structures of innovations in the form of a new, improved product - the creation of modular complexes, including various block containers (kitchen-dining room, shower room, laundry, post-office, dispensary and others. They will dramatically change in the future the quality of resolving the issues of everyday life of servicemen during the performance of combat missions in emergency zones and with participation in armed conflicts. Methodology. The methodology is based on the main measures to improve the logistic support system in the near future, including the reorganization of the existing logistic support system and the creation of modular structures of forces and means that are easily adapted and subsequently targeted for specific tasks. Findings. A set of design documentation for the block - container for laundry and shower in the field is offered. Technological modules for combat (block-post, rear (kitchen

  3. Semantic technologies in a decision support system

    Science.gov (United States)

    Wasielewska, K.; Ganzha, M.; Paprzycki, M.; Bǎdicǎ, C.; Ivanovic, M.; Lirkov, I.

    2015-10-01

    The aim of our work is to design a decision support system based on ontological representation of domain(s) and semantic technologies. Specifically, we consider the case when Grid / Cloud user describes his/her requirements regarding a "resource" as a class expression from an ontology, while the instances of (the same) ontology represent available resources. The goal is to help the user to find the best option with respect to his/her requirements, while remembering that user's knowledge may be "limited." In this context, we discuss multiple approaches based on semantic data processing, which involve different "forms" of user interaction with the system. Specifically, we consider: (a) ontological matchmaking based on SPARQL queries and class expression, (b) graph-based semantic closeness of instances representing user requirements (constructed from the class expression) and available resources, and (c) multicriterial analysis based on the AHP method, which utilizes expert domain knowledge (also ontologically represented).

  4. Risk Management for Human Support Technology Development

    Science.gov (United States)

    jones, Harry

    2005-01-01

    NASA requires continuous risk management for all programs and projects. The risk management process identifies risks, analyzes their impact, prioritizes them, develops and carries out plans to mitigate or accept them, tracks risks and mitigation plans, and communicates and documents risk information. Project risk management is driven by the project goal and is performed by the entire team. Risk management begins early in the formulation phase with initial risk identification and development of a risk management plan and continues throughout the project life cycle. This paper describes the risk management approach that is suggested for use in NASA's Human Support Technology Development. The first step in risk management is to identify the detailed technical and programmatic risks specific to a project. Each individual risk should be described in detail. The identified risks are summarized in a complete risk list. Risk analysis provides estimates of the likelihood and the qualitative impact of a risk. The likelihood and impact of the risk are used to define its priority location in the risk matrix. The approaches for responding to risk are either to mitigate it by eliminating or reducing the effect or likelihood of a risk, to accept it with a documented rationale and contingency plan, or to research or monitor the risk, The Human Support Technology Development program includes many projects with independently achievable goals. Each project must do independent risk management, considering all its risks together and trading them against performance, budget, and schedule. Since the program can succeed even if some projects fail, the program risk has a complex dependence on the individual project risks.

  5. Evolving Distributed Generation Support Mechanisms: Case Studies from United States, Germany, United Kingdom, and Australia

    Energy Technology Data Exchange (ETDEWEB)

    Lowder, Travis [National Renewable Energy Lab. (NREL), Golden, CO (United States); Zhou, Ella [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tian, Tian [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-03-14

    This report expands on a previous National Renewable Energy Laboratory (NREL) technical report (Lowder et al. 2015) that focused on the United States' unique approach to distributed generation photovoltaics (DGPV) support policies and business models. While the focus of that report was largely historical (i.e., detailing the policies and market developments that led to the growth of DGPV in the United States), this report looks forward, narrating recent changes to laws and regulations as well as the ongoing dialogues over how to incorporate distributed generation (DG) resources onto the electric grid. This report also broadens the scope of Lowder et al. (2015) to include additional countries and technologies. DGPV and storage are the principal technologies under consideration (owing to market readiness and deployment volumes), but the report also contemplates any generation resource that is (1) on the customer side of the meter, (2) used to, at least partly, offset a host's energy consumption, and/or (3) potentially available to provide grid support (e.g., through peak shaving and load shifting, ancillary services, and other means).

  6. Cleaner Technology in Denmark - support measures and regulatory efforts

    DEFF Research Database (Denmark)

    Jørgensen, Ulrik

    2005-01-01

    Danish cleaner technology support policies have been successful in fostering innovations that reduce the invironmental impact of products and production. But the lack of enforcement support for cleaner technology in environmental permits has limited the overall impact.......Danish cleaner technology support policies have been successful in fostering innovations that reduce the invironmental impact of products and production. But the lack of enforcement support for cleaner technology in environmental permits has limited the overall impact....

  7. Assisted reproductive technology surveillance -- United States, 2010.

    Science.gov (United States)

    Sunderam, Saswati; Kissin, Dmitry M; Crawford, Sara; Anderson, John E; Folger, Suzanne G; Jamieson, Denise J; Barfield, Wanda D

    2013-12-06

    Since the first U.S. infant conceived with Assisted Reproductive Technology (ART) was born in 1981, both the use of advanced technologies to overcome infertility and the number of fertility clinics providing ART services have increased steadily in the United States. ART includes fertility treatments in which both eggs and sperm are handled in the laboratory (i.e., in vitro fertilization [IVF] and related procedures). Women who undergo ART procedures are more likely to deliver multiple-birth infants than those who conceive naturally because more than one embryo might be transferred during a procedure. Multiple births pose substantial risks to both mothers and infants, including pregnancy complications, preterm delivery, and low birthweight infants. This report provides state-specific information on U.S. ART procedures performed in 2010 and compares infant outcomes that occurred in 2010 (resulting from procedures performed in 2009 and 2010) with outcomes for all infants born in the United States in 2010. 2010. In 1996, CDC began collecting data on all ART procedures performed in fertility clinics in the United States and U.S. territories, as mandated by the Fertility Clinic Success Rate and Certification Act of 1992 (FCSRCA) (Public Law 102-493). Data are collected through the National ART Surveillance System (NASS), a web-based data collecting system developed by CDC. In 2010, a total of 147,260 ART procedures performed in 443 U.S. fertility clinics were reported to CDC. These procedures resulted in 47,090 live-birth deliveries and 61,564 infants. The largest numbers of ART procedures were performed among residents of six states: California (18,524), New York (excluding New York City) (14,212), Illinois (10,110), Massachusetts (9,854), New Jersey (8,783), and Texas (8,754). These six states also had the highest number of live-birth deliveries as a result of ART procedures and together accounted for 48.0% of all ART procedures performed, 45.0% of all infants born

  8. Beryllium Technology Research in the United States

    International Nuclear Information System (INIS)

    Glen R. Longhurst; Robert A. Anderl; M. Kay Adleer-Flitton; Gretchen E. Matthern; Troy J. Tranter; Kendall J. Hollis

    2005-01-01

    While most active research involving beryllium in the United States remains tied strongly to biological effects, there are several areas of technology development in the last two years that should be mentioned. (1) Beryllium disposed of in soil vaults at the Idaho National Laboratory (INL) Radioactive Waste Management Complex (RWMC) has been encapsulated in-situ by high-temperature and pressure injection of a proprietary wax based material to inhibit corrosion. (2) A research program to develop a process for removing heavy metals and cobalt from irradiated beryllium using solvent extraction techniques has been initiated to remove components that prevent the beryllium from being disposed of as ordinary radioactive waste. (3) The JUPITER-II program at the INL Safety and Tritium Applied Research (STAR) facility has addressed the REDOX reaction of beryllium in molten Flibe (a mixture of LiF and BeF2) to control tritium, particularly in the form of HF, bred in the Flibe by reactions involving both beryllium and lithium. (4) Work has been performed at Los Alamos National Laboratory to produce beryllium high heat flux components by plasma spray deposition on macro-roughened substrates. Finally, (5) corrosion studies on buried beryllium samples at the RWMC have shown that the physical form of some of the corroded beryllium is very filamentary and asbestos-like. This form of beryllium may exacerbate the contraction of chronic beryllium disease

  9. 3 CFR - Waiver of Reimbursement Under the United Nations Participation Act to Support the United Nations...

    Science.gov (United States)

    2010-01-01

    ... Participation Act to Support the United Nations/African Union Mission in Darfur Presidential Documents Other... the United Nations Participation Act to Support the United Nations/African Union Mission in Darfur Memorandum for the Secretary of State By the authority vested in me as President by the Constitution and the...

  10. The United States Department of Energy Office of Industrial Technology`s Technology Benefits Recording System

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, K.R.; Moore, N.L.

    1994-09-01

    The U.S. Department of Energy (DOE) Office of Industrial Technology`s (OIT`s) Technology Benefits Recording System (TBRS) was developed by Pacific Northwest Laboratory (PNL). The TBRS is used to organize and maintain records of the benefits accrued from the use of technologies developed with the assistance of OIT. OIT has had a sustained emphasis on technology deployment. While individual program managers have specific technology deployment goals for each of their ongoing programs, the Office has also established a separate Technology Deployment Division whose mission is to assist program managers and research and development partners commercialize technologies. As part of this effort, the Technology Deployment Division developed an energy-tracking task which has been performed by PNL since 1977. The goal of the energy-tracking task is to accurately assess the energy savings impact of OIT-developed technologies. In previous years, information on OIT-sponsored technologies existed in a variety of forms--first as a hardcopy, then electronically in several spreadsheet formats that existed in multiple software programs. The TBRS was created in 1993 for OIT and was based on information collected in all previous years from numerous industrial contacts, vendors, and plants that have installed OIT-sponsored technologies. The TBRS contains information on technologies commercialized between 1977 and the present, as well as information on emerging technologies in the late development/early commercialization stage of the technology life cycle. For each technology, details on the number of units sold and the energy saved are available on a year-by-year basis. Information regarding environmental benefits, productivity and competitiveness benefits, or impact that the technology may have had on employment is also available.

  11. Assisted Reproductive Technology Surveillance - United States, 2014.

    Science.gov (United States)

    Sunderam, Saswati; Kissin, Dmitry M; Crawford, Sara B; Folger, Suzanne G; Jamieson, Denise J; Warner, Lee; Barfield, Wanda D

    2017-02-10

    Since the first U.S. infant conceived with assisted reproductive technology (ART) was born in 1981, both the use of ART and the number of fertility clinics providing ART services have increased steadily in the United States. ART includes fertility treatments in which eggs or embryos are handled in the laboratory (i.e., in vitro fertilization [IVF] and related procedures). Women who undergo ART procedures are more likely than women who conceive naturally to deliver multiple-birth infants. Multiple births pose substantial risks to both mothers and infants, including obstetric complications, preterm delivery, and low birthweight infants. This report provides state-specific information for the United States (including the District of Columbia and Puerto Rico) on ART procedures performed in 2014 and compares birth outcomes that occurred in 2014 (resulting from ART procedures performed in 2013 and 2014) with outcomes for all infants born in the United States in 2014. 2014. In 1996, CDC began collecting data on ART procedures performed in fertility clinics in the United States as mandated by the Fertility Clinic Success Rate and Certification Act of 1992 (FCSRCA) (Public Law 102-493). Data are collected through the National ART Surveillance System (NASS), a web-based data collection system developed by CDC. This report includes data from 52 reporting areas (the 50 states, the District of Columbia, and Puerto Rico). In 2014, a total of 169,568 ART procedures (range: 124 in Wyoming to 21,018 in California) with the intent to transfer at least one embryo were performed in 458 U.S. fertility clinics and reported to CDC. These procedures resulted in 56,028 live-birth deliveries (range: 52 in Wyoming to 7,230 in California) and 68,782 infants born (range: 64 in Wyoming to 8,793 in California). Nationally, the total number of ART procedures performed per million women of reproductive age (15-44 years), a proxy measure of the ART usage rate, was 2,647 (range: 364 in Puerto Rico

  12. INFORMATION TECHNOLOGIES IN INSURANCE SALES SUPPORT

    Directory of Open Access Journals (Sweden)

    Stofor Ovidiu-Ilie

    2012-07-01

    Full Text Available Insurance system in Romania is carried out with a constant natural activity, evolving quite honorably these times. This is largely due to the difficulty with which insurance is sold in normal economic conditions when it comes to prosperity. Although psychologists, led by Maslow believes that the protection needs are basic needs, along with the physiological one, on the priority list regarding procurement, insurance needs are for some Romanians, of minimum or no importance, so that they are either pushed to the bottom of the list, or even, as it most often happens, they are non existent. Current economic conditions and climate, urges caution on most fields, especially in terms of individual properties, including, how somewhat forced, life and physical integrity which are still considered property, if this aspect is not debated in terms of Christian or other religious dogma. In other words, many Romanians see insurance as a product that “is not up their alley” including it in the luxury category. Furthermore, the media shows, sometimes amplify certain cases of doubt in relations between insurance company - customer. Appropriate marketing, allied with the information technology can improve the complete relationship between the two entities - the offeror and the consumer. Through this study we aim to identify important issues that facilitate the sale of insurance, using information technology, given that the sales of these financial products through the "ancestral" methods are effective but not very efficient. We will follow, byanchoring to the current reality, the insurance utility and how to use information technologies in support of marketing (sales. The study itself was done by observing the results in practical work, from an insurance agency, but also related to what the literature offers. Because this study is currently underway, there are certainly some limitations of accuracy of results, which are adjusted "on the fly". Realizing

  13. Fiscal 1996 achievement report. Coal liquefaction technology development - Bituminous coal liquefaction technology development - Study for supporting pilot plant - Study using 1t/d PSU (Study of operation using PSU); 1996 nendo seika hokokusho. Sekitan ekika gijutsu kaihatsu - Rekiseitan ekika gijutsu no kaihatsu - Pilot plant no shien kenkyu - 1t/d process support unit (PSU) ni yoru kenkyu (PSU ni yoru unten kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The operation of a 1t/d PSU (process support unit) was studied for the NEDOL coal liquefaction process. In the modification of facilities, detailed designs were prepared for product oil reforming facilities and some equipment and devices were procured. In addition, the 3rd liquefaction reactor cone section and the neutron attenuation-aided measuring device were refurbished. In the injection of coal, a 62-day and 23-day slurry injection operations were accomplished using Tanito Harum coal, when the impact imposed on the yield of the product, etc., by the change of liquefaction catalysts and by gas phase hydrogen concentration enriching conditions was investigated, and the unit was examined for operationality. During a 42-day operation for maintenance, the unit was operated using only the slurry heater for the investigation of the initial reaction in liquefaction, and studies were conducted about the heater exit temperature, G/L (gas-liquid ratio), and the effect to ensue from the use of a different solvent. In the effort to develop and evaluate new materials, implantation tests were conducted for metallic materials and the 3rd liquefaction reactor was subjected to a non-destructive inspection. Wastewater from the process was examined for quality, and environment-related measurements were performed for the atmosphere. (NEDO)

  14. Assisted Reproductive Technology Surveillance - United States, 2015.

    Science.gov (United States)

    Sunderam, Saswati; Kissin, Dmitry M; Crawford, Sara B; Folger, Suzanne G; Boulet, Sheree L; Warner, Lee; Barfield, Wanda D

    2018-02-16

    Since the first U.S. infant conceived with assisted reproductive technology (ART) was born in 1981, both the use of ART and the number of fertility clinics providing ART services have increased steadily in the United States. ART includes fertility treatments in which eggs or embryos are handled in the laboratory (i.e., in vitro fertilization [IVF] and related procedures). Although the majority of infants conceived through ART are singletons, women who undergo ART procedures are more likely than women who conceive naturally to deliver multiple-birth infants. Multiple births pose substantial risks for both mothers and infants, including obstetric complications, preterm delivery (state-specific information for the United States (including the District of Columbia and Puerto Rico) on ART procedures performed in 2015 and compares birth outcomes that occurred in 2015 (resulting from ART procedures performed in 2014 and 2015) with outcomes for all infants born in the United States in 2015. 2015. In 1995, CDC began collecting data on ART procedures performed in fertility clinics in the United States as mandated by the Fertility Clinic Success Rate and Certification Act of 1992 (FCSRCA) (Public Law 102-493 [October 24, 1992]). Data are collected through the National ART Surveillance System, a web-based data collection system developed by CDC. This report includes data from 52 reporting areas (the 50 states, the District of Columbia, and Puerto Rico). In 2015, a total of 182,111 ART procedures (range: 135 in Alaska to 23,198 in California) with the intent to transfer at least one embryo were performed in 464 U.S. fertility clinics and reported to CDC. These procedures resulted in 59,334 live-birth deliveries (range: 55 in Wyoming to 7,802 in California) and 71,152 infants born (range: 68 in Wyoming to 9,176 in California). Nationally, the number of ART procedures performed per 1 million women of reproductive age (15-44 years), a proxy measure of the ART utilization rate, was

  15. Institutional Support : Centre for Research and Technology ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    year-old science and technology research centre at Maseno University in western Kenya. The Centre focuses on science and technology research to influence both national policies and development practices at the community level. Currently ...

  16. Supporting teachers' technology integration in lesson plans

    NARCIS (Netherlands)

    Janssen, Noortje

    2017-01-01

    Lesson planning offers rich opportunities for teachers to consider and implement technology in the classroom. This dissertation investigated the design and effectiveness of supplementary information to assist pre-service teachers during the lesson planning process. Based on the Technological,

  17. Technology Adoption: A Comparison Between Canada and the United States

    OpenAIRE

    Baldwin, John R.; Sabourin, David

    1999-01-01

    This study examines differences in technology use in Canada as opposed to the United States as well as reasons for these differences. It examines different aspects of technology use-numbers of technologies used, types of technologies used, as well as regional, size and industry variations in their use. It then investigates differences in benefits that plant managers perceive stem from advanced technology use and differences in the factors that managers assess as impediments. While managers in...

  18. A Lunar Surface System Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Taleghani, barmac K.

    2011-01-01

    This paper discusses the establishment of a Supportability Technology Development Roadmap as a guide for developing capabilities intended to allow NASA s Constellation program to enable a supportable, sustainable and affordable exploration of the Moon and Mars. Presented is a discussion of supportability, in terms of space facility maintenance, repair and related logistics and a comparison of how lunar outpost supportability differs from the International Space Station. Supportability lessons learned from NASA and Department of Defense experience and their impact on a future lunar outpost is discussed. A supportability concept for future missions to the Moon and Mars that involves a transition from a highly logistics dependent to a logistically independent operation is discussed. Lunar outpost supportability capability needs are summarized and a supportability technology development strategy is established. The resulting Lunar Surface Systems Supportability Strategy defines general criteria that will be used to select technologies that will enable future flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. This strategy also introduces the concept of exploiting flight hardware as a supportability resource. The technology roadmap involves development of three mutually supporting technology categories, Diagnostics Test and Verification, Maintenance and Repair, and Scavenging and Recycling. The technology roadmap establishes two distinct technology types, "Embedded" and "Process" technologies, with different implementation and thus different criteria and development approaches. The supportability technology roadmap addresses the technology readiness level, and estimated development schedule for technology groups that includes down-selection decision gates that correlate with the lunar program milestones. The resulting supportability technology roadmap is intended to develop a set

  19. Making Choices in the Virtual World: The New Model at United Technologies Information Network.

    Science.gov (United States)

    Gulliford, Bradley

    1998-01-01

    Describes changes in services of the United Technologies Corporation Information Network from a traditional library system to a virtual system of World Wide Web sites, a document-delivery unit, telephone and e-mail reference, and desktop technical support to provide remote access. Staff time, security, and licensing issues are addressed.…

  20. How X-37 Technology Demonstration Supports Reusable Launch Vehicles

    Science.gov (United States)

    Manley, David J.; Cervisi, Richard T.; Staszak, Paul R.

    2000-01-01

    This presentation discusses, in viewgraph form, how X-37 Technology Demonstration Supports Reusable Launch Vehicles. The topics include: 1) X-37 Program Objectives; 2) X-37 Description; 3) X-37 Vehicle Characteristics; 4) X-37 Expands the Testbed Envelope to Orbital Capability; 5) Overview of X-37 Flight Test Program; 6) Thirty-Nine Technologies and Experiments are Being Demonstrated on the X-37; 7) X-37 Airframe/Structures Technologies; 8) X-37 Mechanical, Propulsion, and Thermal System Technologies and Experiments; 9) X-37 GN&C Technologies; 10) X-37 Avionics, Power, and Software Technologies and Experiments; and 11) X-37 Technologies and Experiments Support Reusable Launch Vehicle Needs.

  1. Nuclear Systems (NS): Technology Demonstration Unit (TDU) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Nuclear Systems Project demonstrates nuclear power technology readiness to support the goals of NASA’s Space Technology Mission Directorate. To this end,...

  2. Future networks and technologies supporting innovative communications

    DEFF Research Database (Denmark)

    Prasad, Ramjee

    2012-01-01

    and applications. This paper focuses on the technological aspects of ubiquitous networking and communication technologies, including challenges related to green communications, and security, privacy and trust. The paper proposes a novel concept for a Wireless Innovative System for Dynamically Operating Mega...

  3. Brain-Based Learning With Technological Support

    Science.gov (United States)

    Miller, Anita

    2004-01-01

    Utilization of technology in secondary schools is varied and depends on the training and interest of the individual instructors. Even though technology has advanced way beyond its utilitarian roots of being viewed solely by educators as a useful machine for teachers to key exams and worksheets on, there are still many secondary educators who still…

  4. Center for Global Health announces grants to support portable technologies

    Science.gov (United States)

    NCI's Center for Global Health announced grants that will support the development and validation of low-cost, portable technologies. These technologies have the potential to improve early detection, diagnosis, and non-invasive or minimally invasive treatm

  5. Supporting the industrialisation of aerospace technologies

    CSIR Research Space (South Africa)

    Botha, M

    2015-10-01

    Full Text Available Globally, the aerospace industry is recognised as one of the most significant multipliers for economic development. Aerospace requires a technology injection to enhance industrialisation. An example is the Rooivalk development programme, which...

  6. A Technology Investigation Supporting Software Architecture and Analysis for Evolution

    National Research Council Canada - National Science Library

    Garlan, David

    2001-01-01

    In this report we summarize the approaches and result of the project "A Technology Investigation Supporting Software Architecture and Analysis for Evolution," carried out at Carnegie Mellon University...

  7. Establishing a support service for educational technology within a university

    Directory of Open Access Journals (Sweden)

    J. A. Longstaffe

    1996-12-01

    Full Text Available Over the past decade it has become increasingly apparent that computer technology is extremely effective in the support of teaching and learning. It has also become obvious that without proselytization and support, the adoption of this new method of teaching is patchy and frequently inappropriate. The raising of awareness, the training of staff and the provision of informed advice and support are necessary to facilitate the appropriate development of technology-supported learning within an institution.

  8. Fiscal 1998 achievement report. Coal liquefaction technology development - Bituminous coal liquefaction technology development - Study for supporting pilot plant - Study using 1t/d PSU (Study of operation using PSU); 1998 nendo seika hokokusho. Sekitan ekika gijutsu kaihatsu - Rekiseitan ekika gijutsu no kaihatsu - Pilot plant no shien kenkyu - 1t/d process support unit (PSU) ni yoru kenkyu (PSU ni yoru unten kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-06-01

    The operation of a 1t/d PSU (process support unit) was studied for the NEDOL coal liquefaction process. For the modification of facilities, product oil reforming facilities were installed. In the coal injection operation, a 59-day slurry operation was carried out using Tanito Harum coal, which was for the evaluation of the reforming effect under the product reforming conditions, operationality, and liquefaction characteristics. A 37-day slurry operation was also performed using Chinese coal, which was intended to pursue improved cost performance and to collect the light oil fraction in the flow of reforming operation. In the operation for maintenance, investigations were conducted into conditions for hydrogenation in a 1-through operation involving the solvent hydrogenation process and the normal pressure distillation facilities and into the effect of pre-hydrogenation solvent properties, which aimed at grasping the effect of product oil reforming measures and their influence on operationality. In the survey of environments, the properties of wastewater from the liquefaction process using Tanito Harum coal were studied and toxicity evaluation tests were conducted for activated sludge. (NEDO)

  9. Fiscal 1997 achievement report. Coal liquefaction technology development - Bituminous coal liquefaction technology development - Study for supporting pilot plant - Study using 1t/d PSU (Study of operation using PSU); 1997 nendo seika hokokusho. Sekitan ekika gijutsu kaihatsu - Rekiseitan ekika gijutsu no kaihatsu - Pilot plant no shien kenkyu - 1t/d process support unit (PSU) ni yoru kenkyu (PSU ni yoru unten kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The operation of a 1t/d PSU (process support unit) was studied for the NEDOL coal liquefaction process. In the modification of facilities, equipment and devices were procured for the product oil reforming facilities and their installation was partly accomplished. In the coal injection operation, a 60-day slurry operation was conducted, using coal types of the upper limit and lower limit qualities, for expanding the scope of coal types applicable to the NEDOL process and for exploring optimum conditions, and another operation of 37 days was conducted using Chinese coal and Chinese-prepared liquefaction catalysts, and the two operations were studied for difference in yields and in operationality. Characteristics of the liquefaction reactors were investigated and basic studies were made relative to the physical property of the yielded coal oil. In the operation for maintenance, the 1st liquefaction reactor was singly operated for an 8-day slurry operation, which was to check the progress of liquefaction in a 1-reactor setup. Concerning the reforming of the product oil, the hydrogenation reactors were checked for their response to temperature control. Moreover, hydrogenation solvents were produced for the PSU and for China. (NEDO)

  10. Society for Assisted Reproductive Technology and assisted reproductive technology in the United States: a 2016 update.

    Science.gov (United States)

    Toner, James P; Coddington, Charles C; Doody, Kevin; Van Voorhis, Brad; Seifer, David B; Ball, G David; Luke, Barbara; Wantman, Ethan

    2016-09-01

    The Society for Assisted Reproductive Technology (SART) was established within a few years of assisted reproductive technology (ART) in the United States, and has not only reported on the evolution of infertility care, but also guided it toward improved success and safety. Moving beyond its initial role as a registry, SART has expanded its role to include quality assurance, data validation, practice and advertising guidelines, research, patient education and advocacy, and membership support. The success of ART in this country has greatly benefited from SART's role, as highlighted by a series of graphs. SART continues to set the standard and lead the way. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  11. Supporting women's leadership in science, technology, and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The program will be managed by the Secretariat of the Organization of Women in Science for the Developing World, a program unit of UNESCO's World Academy of Science. IDRC's contribution of CA$7.5 million over four and a half years will provide early career women scientists with the opportunity and skills to become ...

  12. Supporting Teachers' Technology Integration: A Descriptive Analysis of Social and Teaching Presence in Technical Support Sessions

    Science.gov (United States)

    Albert, Jennifer L.; Blanchard, Margaret R.; Kier, Meredith W.; Carrier, Sarah J.; Gardner, Grant E.

    2014-01-01

    Given the importance of technology in today's society, many teacher professional development (TPD) efforts incorporate instructional technologies. Following TPD, little is known about how to adequately support teachers in the use of these instructional technologies. Supporting teachers in geographically distant schools is particularly challenging.…

  13. Integration of element technology and system supporting thermonuclear fusion

    International Nuclear Information System (INIS)

    2003-01-01

    A special committee for integrated system technology survey on thermonuclear fusion (TNF) was begun on June, 1999, under an aim to generally summarize whole of shapes on technology to realize TNF reactor to summarize present state of every technologies and their positioning in whole of their TNF technology. On a base of survey of these recent informations, this report is comprehensively summarized for an integrated system technology on TNF. It has outlines on magnetic field enclosing method, outlines on inertia enclosing method, element technology supporting TNF, new power generation techniques, and ripple effects on TNF technology. (G.K.)

  14. Support and Technology Transfer: Results and Accomplishments

    Science.gov (United States)

    2009-07-01

    Advanced Food Technology School of Enviromental and Biological Sciences New Brunswick, NJ 08903 FTR 213 Defense Logistics Agency 8725 John J. Kingsman Rd...Partners in and beyond the CORANET II Program, and maintain a high level of cooperation and rapport. The following modifications were issued :  0002

  15. Supporting indigenous women in science, technology, engineering ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    These programs, partly funded by Mexico's Consejo Nacional de Ciencia y Tecnologia (CONACYT) (National council of science and technology), have considerably improved the participation of indigenous people in the country's education system. However, there continue to be important challenges in advancement ...

  16. Getting Your Counselor to Support Technology Education

    Science.gov (United States)

    Preble, Brian C.

    2016-01-01

    Is there a disconnect between counselors and educators in technology and vocational education? What is counseling, and what is a school counselor's role in a secondary school setting? How can one work with his or her guidance staff to ensure that students better understand your course offerings? The development of relationships, knowledge, and…

  17. Levels of medical support for United Nations peacekeeping operations.

    Science.gov (United States)

    Seet, B

    1999-07-01

    It is important to standardize the classification of medical units in United Nations (U.N.) peacekeeping operations to ensure that they meet operational requirements and to facilitate planning and administration. It further ensures interoperability between medical facilities from different countries. The U.N. Department of Peacekeeping Operations has adopted a four-level medical support organization, with the classification level of a unit largely determined by its treatment capability and capacity. Planning and allocation of medical resources depend largely on the peacekeeping mandate, the type of peacekeeping operation, existing medical infrastructure, geographical factors, and assessed medical threats. A summary of medical units currently deployed in U.N. peacekeeping missions is presented. This should promote understanding of the U.N. medical support concept and assist national military organizations in the planning for such operations.

  18. Risk analysis and technology assessment in support of technology development

    NARCIS (Netherlands)

    Wezel, van Annemarie P.; Lente, van Harro; Sandt, van de Johannes J.M.; Bouwmeester, Hans; Vandeberg, Rens L.J.; Sips, Adrienne J.A.M.

    2018-01-01

    Governments invest in “key enabling technologies,” such as nanotechnology, to solve societal challenges and boost the economy. At the same time, governmental agencies demand risk reduction to prohibit any often unknown adverse effects, and industrial parties demand smart approaches to reduce

  19. Technology-Supported Learning Environments in Science Classrooms in India

    Science.gov (United States)

    Gupta, Adit; Fisher, Darrell

    2012-01-01

    The adoption of technology has created a major impact in the field of education at all levels. Technology-supported classroom learning environments, involving modern information and communication technologies, are also entering the Indian educational system in general and the schools in Jammu region (Jammu & Kashmir State, India) in…

  20. Lifelong Learning and its support with new technologies

    NARCIS (Netherlands)

    Kalz, Marco

    2014-01-01

    This chapter provides an overview about the use of new technologies for lifelong learning. While in the past learning technologies were mostly provided by educational institutions to support a specific lifetime or shorter learning episodes nowadays more personal technologies are used for lifelong

  1. Expert system for operational personnel support during power unit operation control in regulation range

    International Nuclear Information System (INIS)

    Yanitskij, V.A.

    1992-01-01

    The problems met when developing the systems for NPP operator support in the process of power unit operation are considered. The expert system for NPP personnel intelligent support combining the properties belonging to the artificial intelligence systems including selection of the analysis method taking into account the concrete technological situation and capability of application of algothmic calculations of the equipment characteristics using the information accumulated during the system development, erection and operation is described

  2. Teaching Practice Supported by Technology Use

    DEFF Research Database (Denmark)

    Jensen, Helle Bækkelund

    2006-01-01

    and the design and use of web sites is viewed as corresponding. It is the hypothesis of the research underlying this article that the design and use of a web site reflects the intentions and beliefs of the university teacher. As a result of this relation it should be possible to explore and analyse conceptions...... a range of beliefs and intentions about teaching and a corresponding use of technology....

  3. Leveraging Information Technology. Track IV: Support Services.

    Science.gov (United States)

    CAUSE, Boulder, CO.

    Seven papers from the 1987 CAUSE conference's Track IV, Support Services, are presented. They include: "Application Development Center" (John F. Leydon); "College Information Management System: The Design and Implementation of a Completely Integrated Office Automation and Student Information System" (Karen L. Miselis);…

  4. Supporting Project Work with Information Technology

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2015-01-01

    activities. The second is to direct student use of ICT in terms of making systems available and teaching academic computing. The third challenge is to supervise and conduct project work online and in blended learning environments. Finally, one must find a way to exploit the potentials of ICT in problem...... University problem-oriented project work is based. However, in implementing and integrating the new technologies in academic practices, a number of challenges have had to be addressed. This chapter discusses four of these challenges. The first is to provide a physical and virtual framework for learning...

  5. Spallation sources in support of technology

    Energy Technology Data Exchange (ETDEWEB)

    Pynn, R. [Los Alamos National Lab., NM (United States)

    1996-05-01

    In this contribution I summarize a number of recent experiments at the Los Alamos Neutron Science Center (LANSCE) that have contributed to strategic and applied research. A number of new tools have been developed to address these problems, including software that allows materials texture to be obtained during Rietveld refinement, Bragg-edge diffraction, resonant-neutron and proton radiography. These tools have the potential to impact basic as well as applied research. It is clear that a new, more powerful neutron source such as the planned Japanese Hadron Project will be able to use these and other techniques to contribute in a direct way to important industrial technologies. (author)

  6. Spallation sources in support of technology

    International Nuclear Information System (INIS)

    Pynn, R.

    1996-01-01

    In this contribution the author summarise a number of recent experiments at the Los Alamos Neutron Science Center (LANSCE) that have contributed to strategic and applied research. A number of new tools have been developed to address these problems, including software that allows materials texture to be obtained during Rietveld refinement, Bragg-edge diffraction, resonant-neutron and proton radiography. These tools have the potential to impact basic as well as applied research. It is clear that a new, more powerful neutron source such as the planned Japanese Hadron Project will be able to use these and other techniques to contribute in a direct way to important industrial technologies

  7. How the United States Army Reserve Can Effectively Support the Defense Support of Civilian Authorities Mission

    Science.gov (United States)

    2015-02-15

    status, Soldiers are paid for unit training assemblies or UTAs . A UTA lasts four hours and is equal to one day of active duty base pay. An eight-hour...radiological nuclear (CBRN) units in communities throughout the United States. The USAR focus on the homeland security and defense mission will allow the...active Army to concentrate its resources on preparing for and responding to overseas contingency operations. Using the USAR in support of the ARNG in

  8. Application of modern technology for fieldwork support in network operations

    International Nuclear Information System (INIS)

    Eggen, Arnt Ove; Langdal, Bjoern Inge

    2006-04-01

    Demands for rational and efficient operation and management in several business sectors such as power-, oil- and gas industry, telecommunication, water and multi-utility has lead to big changes for personnel in charge of managing the infrastructure and for the field-workers. Contractors providing services for the large power network companies do not have the local knowledge about construction projects, and there are increased demands on efficiency related to completion, documentation and reporting. This implies a need for transmission of knowledge and experiences between office and the field, and support for fieldwork in the form of applications using various technological possibilities. Field solutions that have well-developed technical and organisational properties will make administration of the infrastructure more efficient, and raise the quality of the work. The choice of mobile service will always be a compromise between several different wishes and needs. The properties of hardware, software and communication options will often influence possible choices in the respective fields. As an important step in testing of hardware, software and communication, some prototypes have been developed for Pocket Pc. The prototypes 'Befaring' and 'HelikopterBefaring' have been chosen because they contain many of the elements that are important in a mobile solution. In addition a prototype for internet applications has been developed ('HelikopterBefaringMottak') and a Windows application ('HelikopterBefaringPresentasjon') in order to visualise the received and managed information sent from the mobile units. The technological development both in software, hardware, GPS and mobile telephones is extremely rapid, and the first mobile solutions with Pocket Pc, mobile telephone and GPS in one integrated unit is already on the market (ml)

  9. The vacuum system for technological unit development and design

    International Nuclear Information System (INIS)

    Zhukeshov, A M; Gabdullina, A T; Amrenova, A U; Giniyatova, Sh G; Kaibar, A; Sundetov, A; Fermakhan, K

    2015-01-01

    The paper shows results of development of plasma technological unit on the basis of accelerator of vacuum arc and automated system. During the previous years, the authors investigated the operation of pulsed plasma accelerator and developed unique technologies for hardening of materials. Principles of plasma formation in pulsed plasma accelerator were put into basis of the developed unit. Operation of the pulsed arc accelerator was investigated at different parameters of the charge. The developed vacuum system is designed for production of hi-tech plasma units in high technologies in fields of nanomaterials, mechanical and power engineering and production with high added value. Unlike integrated solutions, the system is a module one to allow its low cost, high reliability and simple maintenance. The problems of use of robots are discussed to modernize the technological process. (paper)

  10. Intelligent decision technology support in practice

    CERN Document Server

    Neves-Silva, Rui; Jain, Lakhmi; Phillips-Wren, Gloria; Watada, Junzo; Howlett, Robert

    2016-01-01

    This book contains a collection of innovative chapters emanating from topics raised during the 5th KES International Conference on Intelligent Decision Technologies (IDT), held during 2013 at Sesimbra, Portugal. The authors were invited to expand their original papers into a plethora of innovative chapters espousing IDT methodologies and applications. This book documents leading-edge contributions, representing advances in Knowledge-Based and Intelligent Information and Engineering System. It acknowledges that researchers recognize that society is familiar with modern Advanced Information Processing and increasingly expect richer IDT systems. Each chapter concentrates on the theory, design, development, implementation, testing or evaluation of IDT techniques or applications.  Anyone that wants to work with IDT or simply process knowledge should consider reading one or more chapters and focus on their technique of choice. Most readers will benefit from reading additional chapters to access alternative techniq...

  11. Supporting Postsecondary English Language Learners' Writing Proficiency Using Technological Tools

    Science.gov (United States)

    Moore, Kathleen A.; Rutherford, Camille; Crawford, Keith A.

    2016-01-01

    Postsecondary international students who are also English language learners face a number of challenges when studying abroad and often are provided with services to support their learning. Though some research examines how institutions can support this population of students, few studies explore how technology is used to support language…

  12. Integrated plant information technology design support functionality

    International Nuclear Information System (INIS)

    Kim, Yeon Seung; Kim, Dae Jin; Barber, P. W.; Goland, D.

    1996-06-01

    This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author)

  13. Integrated plant information technology design support functionality

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yeon Seung; Kim, Dae Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Barber, P. W.; Goland, D. [Atomic Energy Canada Ltd., (Canada)

    1996-06-01

    This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author).

  14. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2010-08-01

    This report identifies the commercial and near-commercial (emerging) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies Program in the Office of Energy Efficiency and Renewable Energy.

  15. The United States Advanced Reactor Technologies Research and Development Program

    International Nuclear Information System (INIS)

    O’Connor, Thomas J.

    2014-01-01

    The following aspects are addressed: • Nuclear energy mission; • Reactor research development and deployment (RD&D) programs: - Light Water Reactor Sustainability Program; - Small Modular Reactor Licensing Technical Support; - Advanced Reactor Technologies (ART)

  16. Nutrition support in the intensive care unit: an evolving science.

    Science.gov (United States)

    Blackburn, George L; Wollner, Samuel; Bistrian, Bruce R

    2010-06-01

    Recent investigations of nutrition support in the intensive care unit (ICU) have revived discussion of optimal strategies for tight glucose control and the administration of total parenteral nutrition. Mode, timing, and adequacy of nutritional support affect glycemic control and outcomes in critically ill patients. The delivery of correctly formulated and safely administered nutritional and metabolic support is a matter of life or death in surgical and critical care units. High-quality research, adequately powered to detect differences in clinically meaningful outcomes, is needed to inform the delivery of nutrition support and serve as the foundation for future clinical trials. These are issues that will need to be addressed in the months and years ahead. Today, the field is in the midst of challenges and change, and though much has been accomplished, much remains to be done. The last 30 years have seen radical changes in the rates of severe obesity, metabolic syndrome, and weight loss surgery. Obese patients heighten surgical risk and require extra caution by ICU nutrition support specialists. This commentary will address the direction of nutrition support services by covering the history, progress, and potential of the field. It will review parenteral nutrition from its inception to its current standing in ICU patient care and discuss the future role of parenteral nutrition in a rapidly changing and increasingly diverse population.

  17. Technology Integration Support Levels for In-Service Teachers

    Science.gov (United States)

    Williams, Mable Evans

    2017-01-01

    In-service teachers across the globe are expected to integrate technology in their respective instructional content area. The purpose of this qualitative study was to explore the perceptions of in-service teachers concerning building-level support for technology integration. Participants in the study were asked to participate in semi-structured…

  18. Technology Support for Self-Organized Learners (Guest Editorial)

    NARCIS (Netherlands)

    Kalz, Marco; Koper, Rob; Hornung-Prähauser, Veronika

    2010-01-01

    Kalz, M., Koper, R., & Hornung-Prähauser, V. (2009). Technology Support for Self-Organized Learners (Guest Editorial) [Special issue]. In M. Kalz, R. Koper & V. Hornung-Prähauser (Eds.), Journal of Educational Technology & Society, 12(3), 1-3.

  19. The US Support Program Assistance to the IAEA Safeguards Information Technology, Collection, and Analysis 2008

    Energy Technology Data Exchange (ETDEWEB)

    Tackentien,J.

    2008-06-12

    One of the United States Support Program's (USSP) priorities for 2008 is to support the International Atomic Energy Agency's (IAEA) development of an integrated and efficient safeguards information infrastructure, including reliable and maintainable information systems, and effective tools and resources to collect and analyze safeguards-relevant information. The USSP has provided funding in support of this priority for the ISIS Re-engineering Project (IRP), and for human resources support to the design and definition of the enhanced information analysis architecture project (nVision). Assistance for several other information technology efforts is provided. This paper will report on the various ongoing support measures undertaken by the USSP to support the IAEA's information technology enhancements and will provide some insights into activities that the USSP may support in the future.

  20. The United Nations Conference on Science and Technology for Development.

    Science.gov (United States)

    Kaplan, M M

    1979-12-01

    Despite a long gestation period in preparation for the United Nations Conference on Science and Technology for Development (UNCSTD) and overall expenditures estimated at some $50 million for this Vienna held conference, there were no dramatic results. The Conference faced trying to reach some compromise agreement on the following main points: 1) a global information system, and governing principles for the transfer of technology; 2) institutional arrangements, particularly within the United Nations system, which would ensure a high status for an Intergovernmental Committee on Science and Technology for development; and 3) automatically renewable financing to be supplied primarily by the industrialized countries to implement the Plan of Action. Arguments concerning these points occupied 2 committees for 10 working days of the conference. The outcome of negotiations on these identified points included the following: 1) minimal progress in facilitating access to industrial information, and to patent rights and transfer of technology in general; 2) the proposed Intergovernmental Committee on Science and Technology for Development will be open to all interested countries and will report to the United Nations General Assembly through ECOSOC; 3) coordination of the post-conference program of the Plan of Action will be centered in the office of Director-General for Development and International Economic Cooperation at the United Nations; 4) $250 million was named as the target for the first 2 years of operation; and 5) groups of experts will be convened on an ad hoc basis to advise on various matters.

  1. The Relationship between Return on Profitability and Costs of Outsourcing Information Technology Technical Support

    Science.gov (United States)

    Odion, Segun

    2011-01-01

    The purpose of this quantitative correlational research study was to examine the relationship between costs of operation and total return on profitability of outsourcing information technology technical support in a two-year period of outsourcing operations. United States of America list of Fortune 1000 companies' chief information officers…

  2. FEATURES OF USING AUGMENTED REALITY TECHNOLOGY TO SUPPORT EDUCATIONAL PROCESSES

    Directory of Open Access Journals (Sweden)

    Yury A. Kravchenko

    2014-01-01

    Full Text Available The paper discusses the concept and technology of augmented reality, the rationale given the relevance and timeliness of its use to support educational processes. Paper is a survey and study of the possibility of using augmented reality technology in education. Architecture is proposed and constructed algorithms of the software system management QR-codes media objects. An overview of the features and uses of augmented reality technology to support educational processes is displayed, as an option of a new form of visual demonstration of complex objects, models and processes. 

  3. Assistive Technologies for Aged Care: Supportive or Empowering?

    Directory of Open Access Journals (Sweden)

    Suchada Vichitvanichphong

    2014-11-01

    Full Text Available The main objective of this paper is to explore the potentials of assistive technologies to support seniors’ independent living. The work looks at two salient aspects of utilizing technologies for elderly, namely direct support and empowering technologies. The research undertakes a comprehensive analysis of attempts that have been made through investigation of the literature. For this purpose, a realist review of relevant papers published since 2000 has been conducted. The paper concludes that although much research in this area targets the direct support for older adults, the effective use of technologies to maintain seniors’ physical and cognitive abilities requires further investigations. This can provide avenues of opportunities that would empower seniors for their independent living.

  4. Renewable energy policy design and framing influence public support in the United States

    Science.gov (United States)

    Stokes, Leah C.; Warshaw, Christopher

    2017-08-01

    The United States has often led the world in supporting renewable energy technologies at both the state and federal level. However, since 2011 several states have weakened their renewable energy policies. Public opinion will probably be crucial for determining whether states expand or contract their renewable energy policies in the future. Here we show that a majority of the public in most states supports renewable portfolio standards, which require a portion of the electricity mix to come from renewables. However, policy design and framing can strongly influence public support. Using a survey experiment, we show that effects of renewable portfolio standards bills on residential electricity costs, jobs and pollution, as well as bipartisan elite support, are all important drivers of public support. In many states, these bills' design and framing can push public opinion above or below majority support.

  5. Atoms in industry: Radiation technology supports development [Foreword

    International Nuclear Information System (INIS)

    Amano, Yukiya

    2015-01-01

    Cutting-edge industrial technologies underpin the success of strong economies, in developed and developing countries alike. Nuclear science and technology, in particular, can make a major contribution to economic growth and competitiveness, and have an important role to play in support of sustainable development. The IAEA helps to make nuclear science and technology available to enable countries to pursue wider development objectives in areas including human health, agriculture, natural resource management and environmental protection. This edition of the IAEA Bulletin highlights some of the ways in which the technology is being put to effective use in industry.

  6. Exploration Life Support Technology Development for Lunar Missions

    Science.gov (United States)

    Ewert, Michael K.; Barta, Daniel J.; McQuillan, Jeffrey

    2009-01-01

    Exploration Life Support (ELS) is one of NASA's Exploration Technology Development Projects. ELS plans, coordinates and implements the development of new life support technologies for human exploration missions as outlined in NASA's Vision for Space Exploration. ELS technology development currently supports three major projects of the Constellation Program - the Orion Crew Exploration Vehicle (CEV), the Altair Lunar Lander and Lunar Surface Systems. ELS content includes Air Revitalization Systems (ARS), Water Recovery Systems (WRS), Waste Management Systems (WMS), Habitation Engineering, Systems Integration, Modeling and Analysis (SIMA), and Validation and Testing. The primary goal of the ELS project is to provide different technology options to Constellation which fill gaps or provide substantial improvements over the state-of-the-art in life support systems. Since the Constellation missions are so challenging, mass, power, and volume must be reduced from Space Shuttle and Space Station technologies. Systems engineering analysis also optimizes the overall architecture by considering all interfaces with the life support system and potential for reduction or reuse of resources. For long duration missions, technologies which aid in closure of air and water loops with increased reliability are essential as well as techniques to minimize or deal with waste. The ELS project utilizes in-house efforts at five NASA centers, aerospace industry contracts, Small Business Innovative Research contracts and other means to develop advanced life support technologies. Testing, analysis and reduced gravity flight experiments are also conducted at the NASA field centers. This paper gives a current status of technologies under development by ELS and relates them to the Constellation customers who will eventually use them.

  7. Experiences with Lab-on-a-chip Technology in Support of NASA Supported Research

    Science.gov (United States)

    Monaco, Lisa

    2003-01-01

    Under the auspices of the Microgravity Sciences and Application Department at Marshall Space Flight Center, we have custom designed and fabricated a lab-on-a-chip (LOC) device, along with Caliper Technologies, for macromolecular crystal growth. The chip has been designed to deliver specified proportions of up-to five various constituents to one of two growth wells (on-chip) for crystal growth. To date, we have grown crystals of thaumatin, glucose isomerase and appoferitin on the chip. The LOC approach offered many advantages that rendered it highly suitable for space based hardware to perform crystal growth on the International Space Station. The same hardware that was utilized for the crystal growth investigations, has also been used by researchers at Glenn Research Center to investigate aspects of microfluidic phenomenon associated with two-phase flow. Additionally, our LOCAD (Lab-on-a-chip Application Development) team has lent its support to Johnson Space Center s Modular Assay for Solar System Exploration project. At present, the LOCAD team is working on the design and build of a unique lab-on-a-chip breadboard control unit whose function is not commercially available. The breadboard can be used as a test bed for the development of chip size labs for environmental monitoring, crew health monitoring assays, extended flight pharmacological preparations, and many more areas. This unique control unit will be configured for local use and/or remote operation, via the Internet, by other NASA centers. The lab-on-a-chip control unit is being developed with the primary goal of meeting Agency level strategic goals.

  8. Workstation environment supports for startup of YGN 3 and 4 nuclear unit

    International Nuclear Information System (INIS)

    Lee, Won Jae; Kim, Won Bong; Lee, Byung Chae

    1995-07-01

    Light water reactor fuel development division of Korea Atomic Energy Research Institute participated in the installation of the plant computer system and software, and the user support activities of Asea Brown Boveri/Combustion Engineering for the Plant Monitoring System during the startup phase of YGN-3 nuclear unit. The main purpose of the participation is to have the self-reliant plant- computer technology for the independent design and startup of next nuclear units. This report describes the activities performed by KAERI with ABB/CE at the plant site. In addition, it describes the direct transfer of data files between PMS and workstation which was independently carried out by KAERI. Since KAERI should support the site in setting-up the plant computer environment independent of ABB-CE from the next nuclear units, the review was performed for the technical details of activities provided to the site in order to provide the better computer environment in the next nuclear units. In conclusion, this report is expected to provide the technical background for the supporting of plant computing environment and the scope of support work at plant site during Yonggwang 3, 4 startup in the area of plant computer for the next nuclear units. 6 refs. (Author) .new

  9. Workstation environment supports for startup of YGN 3 and 4 nuclear unit

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Won Jae; Kim, Won Bong; Lee, Byung Chae [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-07-01

    Light water reactor fuel development division of Korea Atomic Energy Research Institute participated in the installation of the plant computer system and software, and the user support activities of Asea Brown Boveri/Combustion Engineering for the Plant Monitoring System during the startup phase of YGN-3 nuclear unit. The main purpose of the participation is to have the self-reliant plant- computer technology for the independent design and startup of next nuclear units. This report describes the activities performed by KAERI with ABB/CE at the plant site. In addition, it describes the direct transfer of data files between PMS and workstation which was independently carried out by KAERI. Since KAERI should support the site in setting-up the plant computer environment independent of ABB-CE from the next nuclear units, the review was performed for the technical details of activities provided to the site in order to provide the better computer environment in the next nuclear units. In conclusion, this report is expected to provide the technical background for the supporting of plant computing environment and the scope of support work at plant site during Yonggwang 3, 4 startup in the area of plant computer for the next nuclear units. 6 refs. (Author) .new.

  10. Technological products to support the Venezuelan heavy oil development

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, J.; Negrin, Z.; Duran, M.; Vilera, M.; Santamaria, F. [PDVSA INTEVEP (Venezuela)

    2011-07-01

    In Venezuela, important reserves of heavy oil crude are located at the Orinoco oil belt and the challenge is to develop these fields in a safe and environmentally friendly way. To address this challenge, PDVSA Intevep has been developing cutting edge technologies for more than 30 years. The aim of this paper is to present the principal inventions of PDVSA Intevep and their application in the Venezuelan traditional areas. PDVSA Intevep is the technological development and research center of the Venezuelan national oil industry; they own 773 patents, 103 trademarks, 48 copyrights, 13 trade secrets and 35 products used in different technological areas. The technologies presented will be used in the Orinoco oil belt in support of Venezuelan technological sovereignty. PDVSA Intevep has developed and adapted many technologies aimed at putting oil resources at the service of the whole population and ending social inequalities.

  11. Buildings R&D Breakthroughs: Technologies and Products Supported by the Building Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2012-04-01

    The purpose of the project described in this report is to identify and characterize commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects funded by BTP’s Emerging Technologies subprogram from 2005-2011.

  12. Buildings R&D Breakthroughs. Technologies and Products Supported by the Building Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-04-01

    This report identifies and characterizes commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects sponsored by BTP’s Emerging Technologies subprogram from 2005-2009.

  13. Supporting learner-centered technology integration through situated mentoring

    Science.gov (United States)

    Rosenberg, Marian Goode

    Situated mentoring was used as a professional development method to help 11 high school science teachers integrate learner-centered technology. The teachers' learner-centered technology beliefs and practices as well as their perception of barriers to learner-centered technology integration were explored before and after participating in the mentoring program. In addition, the participants' thoughts about the effectiveness of various components of the mentoring program were analyzed along with the mentor's observations of their practices. Situated mentoring can be effective for supporting learner-centered technology integration, in particular decreasing the barriers teachers experience. Goal setting, collaborative planning, reflection, and onsite just-in-time support were thought to be the most valuable components of the mentoring program.

  14. Manned maneuvering unit - A space platform support system

    Science.gov (United States)

    Whitsett, C. E., Jr.; Lenda, J. A.; Josephson, J. T.

    1978-01-01

    The assembly and evaluation of large space platforms in low earth orbit will become practical in the Shuttle era. Extravehicular crewmembers, equipped with manned maneuvering units (MMUs), will play a vital role in the construction and checkout of these platforms. The MMU is a propulsive backpack with mobility extending the crew's visual, mental, and manipulative capabilities beyond the cabin to on-the-spot assembly and maintenance operations. Previous MMU experience is reviewed, Shuttle MMU design features related to space platform support are described, and the use of the MMU for specific construction and assembly tasks is illustrated.

  15. PORFLOW Simulations Supporting Saltstone Disposal Unit Design Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Flach, G. P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hang, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Taylor, G. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-12-10

    SRNL was requested by SRR to perform PORFLOW simulations to support potential cost-saving design modifications to future Saltstone Disposal Units in Z-Area (SRR-CWDA-2015-00120). The design sensitivity cases are defined in a modeling input specification document SRR-CWDA-2015-00133 Rev. 1. A high-level description of PORFLOW modeling and interpretation of results are provided in SRR-CWDA-2015-00169. The present report focuses on underlying technical issues and details of PORFLOW modeling not addressed by the input specification and results interpretation documents. Design checking of PORFLOW modeling is documented in SRNL-L3200-2015-00146.

  16. Space Life Support Technology Applications to Terrestrial Environmental Problems

    Science.gov (United States)

    Schwartzkopf, Steven H.; Sleeper, Howard L.

    1993-01-01

    Many of the problems now facing the human race on Earth are, in fact, life support issues. Decline of air Quality as a result of industrial and automotive emissions, pollution of ground water by organic pesticides or solvents, and the disposal of solid wastes are all examples of environmental problems that we must solve to sustain human life. The technologies currently under development to solve the problems of supporting human life for advanced space missions are extraordinarily synergistic with these environmental problems. The development of these technologies (including both physicochemical and bioregenerative types) is increasingly focused on closing the life support loop by removing and recycling contaminants and wastes to produce the materials necessary to sustain human life. By so doing, this technology development effort also focuses automatically on reducing resupply logistics requirements and increasing crew safety through increased self-sufficiency. This paper describes several technologies that have been developed to support human life in space and illustrates the applicability of the technologies to environmental problems including environmental remediation and pollution prevention.

  17. Strategies to facilitate stakeholder and regulator support for technology deployment

    International Nuclear Information System (INIS)

    Burford, T.D.

    1997-01-01

    Implementation and deployment of new and innovative environmental technologies is impossible without regulator, enduser and stakeholder support. Technologies being developed for different needs require different strategies to facilitate this endorsement. Areas addressed will include technologies developed to meet site specific cleanup needs and those developed for multiple site applications. A third area deals with using site specific technologies at previously unidentified locations. In order to expand the application of these technologies to other sites a plan to include potential site regulators and stakeholders early in the development process should be considered. The Subsurface Contaminant Focus Area has developed a Stakeholder Communication Plan. This plan, in addition to lessons learned from current technology development projects that have successfully obtained this type of support, will provide the basis for the information provided in this paper. The object of this paper is to suggest strategies that could facilitate the implementation and deployment of technologies at environmental sites by involving regulators and stakeholders at the proper time for various applications

  18. Exploring support for shale gas extraction in the United Kingdom

    International Nuclear Information System (INIS)

    Andersson-Hudson, Jessica; Knight, William; Humphrey, Mathew; O’Hara, Sarah

    2016-01-01

    The development of shale gas in the United Kingdom (UK) using hydraulic fracturing, more commonly known as ‘fracking’, remains in its infancy. Yet understanding public attitudes for this fledgling industry is important for future policy considerations, decision-making and for industry stakeholders. This study uses data collected from the University of Nottingham, UK nationwide online survey (n=3823) conducted in September 2014, to consider ten hypothesises about the UK public's attitudes towards shale gas. From the survey data we can see that 43.11% of respondents support shale gas extraction in the UK. Furthermore, our results show that women, class DE respondents, non-Conservative party supporters, and respondents who positively associate shale gas with water contamination or earthquakes are less likely to support the extraction of shale gas in the UK. We also discuss potential policy implications for the UK government arising from these findings. - Highlights: • September 2014 survey of British attitudes towards allowing shale gas extraction. • Over 75% or respondents correctly identify shale gas. • 43.11% of respondents support shale gas extraction in the UK.

  19. Adoption of precision agriculture technology in the Southeastern United States

    Science.gov (United States)

    Agricultural production in the Southeast is diverse and differs from other regions of the United States (U.S.). Crops grown in the Southeast are specific to the region, such as cotton and peanuts. Corn farmers supply most of the grain produced to the poultry industry to support over 15 billion dolla...

  20. Evolving Distributed Generation Support Mechanisms: Case Studies from United States, Germany, United Kingdom, and Australia (Chinese translation)

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Shengru [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Lowder, Travis R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Tian, Tian [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-07

    This is the Chinese translation of NREL/TP-6A20-67613. This report expands on a previous National Renewable Energy Laboratory (NREL) technical report (Lowder et al. 2015) that focused on the United States' unique approach to distributed generation photovoltaics (DGPV) support policies and business models. While the focus of that report was largely historical (i.e., detailing the policies and market developments that led to the growth of DGPV in the United States), this report looks forward, narrating recent changes to laws and regulations as well as the ongoing dialogues over how to incorporate distributed generation (DG) resources onto the electric grid. This report also broadens the scope of Lowder et al. (2015) to include additional countries and technologies. DGPV and storage are the principal technologies under consideration (owing to market readiness and deployment volumes), but the report also contemplates any generation resource that is (1) on the customer side of the meter, (2) used to, at least partly, offset a host's energy consumption, and/or (3) potentially available to provide grid support (e.g., through peak shaving and load shifting, ancillary services, and other means).

  1. Policies Supporting Local Food in the United States

    Directory of Open Access Journals (Sweden)

    Steve W. Martinez

    2016-08-01

    Full Text Available Local food has been the subject of federal, state, and local government policies in recent years throughout the United States as consumer demand has grown. Local foods have been linked to several government priorities—including enhancing the rural economy, the environment, and supporting agricultural producers. This article provides an overview of U.S. Federal, State and regional policies designed to support local food systems. It details the latest economic information on policy, relying on findings from several national surveys and a synthesis of recent literature. Federal policies related to local food systems were greatly expanded by the 2008 Farm Bill, and are further expanded in the Agricultural Act of 2014. United States policies address several barriers to the further expansion of local food markets, including scaling up output of small farms to address the needs of larger commercial outlets, lack of infrastructure for increasing local food sales, ability to trace product source, and producer education regarding local food expansion.

  2. United States societal experiments via the Communications Technology Satellite

    Science.gov (United States)

    Donoughe, P. L.

    1976-01-01

    After a brief description of the Communication Technology Satellite and its U.S. coverage, the U.S. societal experiments via the CTS are discussed. These include education (college curriculum sharing, and project interchange), health care (biomedical communications, health communications, and communication support for decentralized education), and community and special experiments (satellite library information network, and transportable earth terminal).

  3. Development of Life Support System Technologies for Human Lunar Missions

    Science.gov (United States)

    Barta, Daniel J.; Ewert, Michael K.

    2009-01-01

    With the Preliminary Design Review (PDR) for the Orion Crew Exploration Vehicle planned to be completed in 2009, Exploration Life Support (ELS), a technology development project under the National Aeronautics and Space Administration s (NASA) Exploration Technology Development Program, is focusing its efforts on needs for human lunar missions. The ELS Project s goal is to develop and mature a suite of Environmental Control and Life Support System (ECLSS) technologies for potential use on human spacecraft under development in support of U.S. Space Exploration Policy. ELS technology development is directed at three major vehicle projects within NASA s Constellation Program (CxP): the Orion Crew Exploration Vehicle (CEV), the Altair Lunar Lander and Lunar Surface Systems, including habitats and pressurized rovers. The ELS Project includes four technical elements: Atmosphere Revitalization Systems, Water Recovery Systems, Waste Management Systems and Habitation Engineering, and two cross cutting elements, Systems Integration, Modeling and Analysis, and Validation and Testing. This paper will provide an overview of the ELS Project, connectivity with its customers and an update to content within its technology development portfolio with focus on human lunar missions.

  4. Internationalization at home : Technology-supported multicultural learning in Peru

    NARCIS (Netherlands)

    Olivos Rossini, L.M.

    2016-01-01

    This research contributes to the disciplines of information systems, management science in particular the field of management education and cross-cultural studies. It further proposes a model to understand technology-supported multicultural learning in Peru. In addition, the model examines

  5. Testimony on Federal Financial Support for Fuels and Energy Technologies

    OpenAIRE

    Terry M. Dinan

    2013-01-01

    Energy-related tax preferences—estimated to total $16.4 billion in 2013—provide much of the support for the development and production of fuels and energy technologies. The Energy Department spends a much smaller amount for such purposes.

  6. Professional learning design framework: supporting technology integration in Alberta

    Directory of Open Access Journals (Sweden)

    Lydia van Thiel

    2018-02-01

    Full Text Available Researchers around the world are interested in knowing how to support teachers in developing both their technology skills and their understanding of how educational technologies can provide opportunity to engage all learners at their skill and interest level in learning activities that were not possible without technology. The solution involves the design and development of teacher professional learning (PL. This study examines a snapshot of one school district, which has experienced a growth in available digital student technology occurring at the same time when teachers experienced a loss of traditional pen and paper resources. Qualitative and quantitative data were gathered and analysed to determine what features of PL would best support teachers in this district. These findings were then considered within the scope of government suggested policy, frameworks and reports. The final suggested framework is for a PL that is collaborative, grade and subject relevant; offers hands-on opportunities; is supported by coaching; is based on research; and is supported by leadership which provides both time and a collaboratively developed vision.

  7. Technology to Support Sign Language for Students with Disabilities

    Science.gov (United States)

    Donne, Vicki

    2013-01-01

    This systematic review of the literature provides a synthesis of research on the use of technology to support sign language. Background research on the use of sign language with students who are deaf/hard of hearing and students with low incidence disabilities, such as autism, intellectual disability, or communication disorders is provided. The…

  8. Peer production & peer support at the Free Technology Academy

    NARCIS (Netherlands)

    Potters, Hanneke; Berlanga, Adriana; Bijlsma, Lex

    2012-01-01

    Potters, H., Berlanga, A. J., & Lex, B. (2011). Peer Production & Peer Support at the Free Technology Academy. In G. van de Veer, P. B. Sloep, & M. van Eekelen (Eds.), Proceedings Computer Science Education Research Conference (CSERC '11) (pp. 49-58). April, 7-8, 2011, Heerlen, The Netherlands: ACM.

  9. Toward Understanding Non-Centralized Technology Support in Higher Education

    Science.gov (United States)

    Jackson, Robert Jonathan

    2009-01-01

    The focus of this research is an examination of service quality provided by non-centralized technology personnel, Local Technical Support Providers (LSPs), at a southern research university. The SERVQUAL instrument was selected to measure service quality of LSPs within the Academic Affairs Division. The rationale for selecting and testing SERVQUAL…

  10. Preliminary investigation into the zone of support influence and stable span between support units.

    CSIR Research Space (South Africa)

    Daehnke, A

    1999-10-01

    Full Text Available ).........................................................................................................31 Figure 2.2.12Graph showing the effect of clamping stresses on the factor of safety of wedge- shaped blocks (after Daehnke et al., 1998).......................................................31 Figure 2.3.1(a) Joint with in... support unit (b = 1,0 m, j = 40o, F = 200 kN, w = 0,5 m).. ........................66 Figure 4.3.2 Maximum extent of the zone of support influence governed by bedding plane friction angle, ϕ, and bedding plane height, b...

  11. Advanced Turbine Technology Applications Project (ATTAP) and Hybrid Vehicle Turbine Engine Technology Support project (HVTE-TS): Final summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    This final technical report was prepared by Rolls-Royce Allison summarizing the multiyear activities of the Advanced Turbine Technology Applications Project (ATTAP) and the Hybrid Vehicle Turbine Engine Technology Support (HVTE-TS) project. The ATTAP program was initiated in October 1987 and continued through 1993 under sponsorship of the US Department of Energy (DOE), Energy Conservation and Renewable Energy, Office of Transportation Technologies, Propulsion Systems, Advanced Propulsion Division. ATTAP was intended to advance the technological readiness of the automotive ceramic gas turbine engine. The target application was the prime power unit coupled to conventional transmissions and powertrains. During the early 1990s, hybrid electric powered automotive propulsion systems became the focus of development and demonstration efforts by the US auto industry and the Department of energy. Thus in 1994, the original ATTAP technology focus was redirected to meet the needs of advanced gas turbine electric generator sets. As a result, the program was restructured to provide the required hybrid vehicle turbine engine technology support and the project renamed HVTE-TS. The overall objective of the combined ATTAP and HVTE-TS projects was to develop and demonstrate structural ceramic components that have the potential for competitive automotive engine life cycle cost and for operating 3,500 hr in an advanced high temperature turbine engine environment. This report describes materials characterization and ceramic component development, ceramic components, hot gasifier rig testing, test-bed engine testing, combustion development, insulation development, and regenerator system development. 130 figs., 12 tabs.

  12. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program - 2012

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-09-01

    This FY 2012 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  13. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2015

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-01-08

    This FY 2015 report updates the results of an effort to identify and document the commercial and emerging (projected to be commercialized within the next 3 to 5 years) hydrogen and fuel cell technologies and products that resulted from U.S. Department of Energy support through the Fuel Cell Technologies Office in the Office of Energy Efficiency and Renewable Energy.

  14. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2014

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-02-01

    This FY 2014 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  15. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office - 2013

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-04-30

    This FY 2013 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Office and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  16. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-09-01

    This FY 2011 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  17. Leadership development: an essential ingredient in supporting nursing unit managers

    Directory of Open Access Journals (Sweden)

    Wilson V

    2013-12-01

    Full Text Available Valerie Wilson,1,2 Sheree Paterson,3 Kelly Kornman1 1Nursing Research and Practice Development Unit, The Children’s Hospital at Westmead, Westmead, NSW, Australia; 2Faculty of Nursing Midwifery Health, The University of Technology, Sydney, Broadway, NSW, Australia; 3Formerly of the Nursing Research and Practice Development Unit, The Children’s Hospital at Westmead, Westmead, NSW, Australia Purpose: The aim of the leadership development program was to enhance participants’ understanding of person-centered leadership in the context of their nursing unit manager (NUM roles. Materials and methods: This article details the results of the NUM leadership development program (LDP. Twenty-one NUMs from an Australian pediatric hospital participated in the 8-month program. The evaluation encompassed a group claims/concerns/issues session, one-on-one interviews, and written feedback. Data were themed using a four-step sequential process. Results: The NUM LDP had a positive impact on the leadership practices of the participants. Six key themes were identified from the evaluation: “forming the group”; “being in the group”; “translating into practice”; “how we see ourselves; how do we want to be seen?”; “positive outcomes for me”; and “positive outcomes for others”. Conclusion: This study showed improvements in the leadership understanding and practice of NUMs who participated in the program. Further research, particularly into the transferability of skills and active participatory aspects of these types of evaluation studies, is required. Keywords: nurse, evaluation, person-centered care, experiential learning

  18. DESIGNING FEATURES OF POWER OPTICAL UNITS FOR TECHNOLOGICAL EQUIPMENT

    Directory of Open Access Journals (Sweden)

    M. Y. Afanasiev

    2016-03-01

    Full Text Available This paper considers the question of an optical unit designing for transmitting power laser radiation through an optical fiber. The aim of this work is designing a simple construction unit with minimized reflection losses. The source of radiation in the optical unit described below is an ultraviolet laser with diode pumping. We present the general functioning scheme and designing features for the three main parts: laser beam deflecting system, laser beam dump and optical unit control system. The described laser beam deflection system is composed of a moving flat mirror and a spherical scattering mirror. Comparative analysis of the production technology for such mirrors was carried out, and, as a result, the decision was made to produce both mirrors of 99.99 % pure molybdenum without coating. A moving mirror deflects laser emission from a source through a fiber or deflects it on a spherical mirror and into the laser beam dump, moreover, switching from one position to another occurs almost immediately. It is shown that a scattering mirror is necessary, otherwise, the absorbing surface of the beam dump is being worn out irregularly. The laser beam dump is an open conical cavity, in which the conical element with its spire turned to the emission source is placed. Special microgeometry of the internal surface of the beam dump is suggested for the better absorption effect. An optical unit control system consists of a laser beam deflection system, laser temperature sensor, deflection system solenoid temperature sensor, and deflection mirror position sensor. The signal processing algorithm for signals coming from the sensors to the controller is described. The optical unit will be used in special technological equipment.

  19. Engineering, Analysis and Technology FY 1995 Site Support Program Plan

    International Nuclear Information System (INIS)

    Suyama, R.M.

    1994-09-01

    The vision of the Engineering, Analysis and Technology organization is to be recognized as the cost-effective supplier of specialized, integrated, multi-disciplined engineering teams to support Hanford missions. The mission of the Engineering, Analysis and Technology organization is to provide centralized engineering services. These services are focused on supplying technical design, analytical engineering and related support services that support Hanford's environmental restoration mission. These services include engineering analysis, design and development of systems and engineered equipment, supplying multi-disciplined engineering teams to all Hanford programs and project organizations, engineering document release, and site-wide leadership in the development and implementation of engineering standards, engineering practices, and configuration management processes

  20. Supporting sustainable electricity technologies in Greece using MCDM

    Energy Technology Data Exchange (ETDEWEB)

    Doukas, H.; Patlitzianas, K.D.; Psarras, J. [National Technical Univ., Athens (Greece). School of Electrical and Computer Engineering

    2006-06-15

    The penetration of sustainable technologies in electricity generation is low until now in Greece. However, the recent adoption of legislative rules towards the effective operation of liberalized markets, as well as the increased impact of climate change on the electricity sector towards the period 2008-2012, bring out these technologies as key means for establishing conditions of security, stability and environmental protection. The objective of this paper is to put on the map the sustainable technologies for electricity generation in Greece through the formulation of a collective interactive supportive framework, using an existing multi-criteria decision-making (MCDM) method to elaborate more realistic and transparent outcomes. The approach was implemented under the umbrella of the national Foresight Programme, to assist policy making for sustainable electricity generation technologies. [Author].

  1. Stroke unit care, inpatient rehabilitation and early supported discharge.

    Science.gov (United States)

    Rodgers, Helen; Price, Chris

    2017-04-01

    Stroke units reduce death and disability through the provision of specialist multidisciplinary care for diagnosis, emergency treatments, normalisation of homeostasis, prevention of complications, rehabilitation and secondary prevention. All stroke patients can benefit from provision of high-quality basic medical care and some need high impact specific treatments, such as thrombolysis, that are often time dependent. A standard patient pathway should include assessment of neurological impairment, vascular risk factors, swallowing, fluid balance and nutrition, cognitive function, communication, mood disorders, continence, activities of daily living and rehabilitation goals. Good communication and shared decision making with patients and their families are key to high-quality stroke care. Patients with mild or moderate disability, who are medically stable, can continue rehabilitation at home with early supported discharge teams rather than needing a prolonged stay in hospital. National clinical guidelines and prospective audits are integral to monitoring and developing stroke services in the UK. © Royal College of Physicians 2017. All rights reserved.

  2. Technology Integration Initiative In Support of Outage Management

    Energy Technology Data Exchange (ETDEWEB)

    Gregory Weatherby; David Gertman

    2012-07-01

    Plant outage management is a high priority concern for the nuclear industry from cost and safety perspectives. Often, command and control during outages is maintained in the outage control center where many of the underlying technologies supporting outage control are the same as those used in the 1980’s. This research reports on the use of advanced integrating software technologies and hand held mobile devices as a means by which to reduce cycle time, improve accuracy, and enhance transparency among outage team members. This paper reports on the first phase of research supported by the DOE Light Water Reactor Sustainability (LWRS) Program that is performed in close collaboration with industry to examine the introduction of newly available technology allowing for safe and efficient outage performance. It is thought that this research will result in: improved resource management among various plant stakeholder groups, reduced paper work, and enhanced overall situation awareness for the outage control center management team. A description of field data collection methods, including personnel interview data, success factors, end-user evaluation and integration of hand held devices in achieving an integrated design are also evaluated. Finally, the necessity of obtaining operations cooperation support in field studies and technology evaluation is acknowledged.

  3. Biomedical foundation supports technology aimed at destroying cancer cells

    OpenAIRE

    Nystrom, Lynn A.

    2008-01-01

    A new technology, using electric pulses to destroy cancer tissue and named by NASA Tech Briefs as one of seven key technological breakthroughs of 2007, is receiving additional support aimed at moving the procedure to the marketplace. One of its lead developers, Rafael V. Davalos, a faculty member of the Virginia Tech-Wake Forest University School of Biomedical Engineering and Sciences (SBES), received a $240,000 grant from the Wallace H. Coulter Foundation and $25,000 from the Wake Forest Com...

  4. A Survey of Technologies Supporting Virtual Project Based Learning

    DEFF Research Database (Denmark)

    Dirckinck-Holmfeld, Lone

    2002-01-01

    This paper describes a survey of technologies and to what extent they support virtual project based learning. The paper argues that a survey of learning technologies should be related to concrete learning tasks and processes. Problem oriented project pedagogy (POPP) is discussed, and a framework...... for evaluation is proposed where negotiation of meaning, coordination and resource management are identified as the key concepts in virtual project based learning. Three e-learning systems are selected for the survey, Virtual-U, Lotus Learningspace and Lotus Quickplace, as each system offers different strategies...... for e-learning. The paper concludes that virtual project based learning may benefit from facilities of all these systems....

  5. Research and technology programmes supporting waste management in BNFL

    International Nuclear Information System (INIS)

    Fairhall, G.A.; Horner, A.M.

    2000-01-01

    Waste Management is a major activity of BNFL in the UK and at various locations internationally. To support these activities extensive programmes of Research and Technology have been undertaken for many years. This involves practical studies involving active and non-active work at laboratory and pilot plant scale. Extensive use is also made of theoretical and modelling techniques. Current work is aimed at underpinning and improving current operations supporting the design and safety cases of new plant and addressing waste management activities of the future including decommissioning. (authors)

  6. Coverage Range and Cost Comparison of Remote Antenna Unit Designs for Inbuilding Radio over Fiber Technology

    Directory of Open Access Journals (Sweden)

    Razali Ngah

    2013-09-01

    Full Text Available Future communication needs to be ubiquitous, broadband, convergent, and seamless. Radio over fiber (RoF technology is one of the most important enabler in access network for the technologies. Adoption of RoF faces bottleneck in optoelectronics, that they are still expensive, high power consumption, and limited in bandwidth. To solve the problem, transceiver in remote antenna unit (RAU is developed, i.e. electroabsorption transceiver (EAT and asymmetric FabryPerot modulator (AFPM. This paper compares their coverage range and cost in providing WCDMA and WLAN services. Needed gain of RF amplifier for supporting picocell is also discussed.

  7. Long span cable supported bridges - present technology and trends

    DEFF Research Database (Denmark)

    Gimsing, Niels Jørgen

    1998-01-01

    The activity within the field of long-span cable supported bridges has never been larger than at the end of the 20th century. The technology is well advanced to cope with the present challenges but it is also approaching its limits so if the trend towards ever increasing spans continues into the ...... into the next century, further developments are required to ensure that the bridges will be stable, durable and constructible.......The activity within the field of long-span cable supported bridges has never been larger than at the end of the 20th century. The technology is well advanced to cope with the present challenges but it is also approaching its limits so if the trend towards ever increasing spans continues...

  8. Digital Technologies Supporting Person-Centered Integrated Care - A Perspective.

    Science.gov (United States)

    Øvretveit, John

    2017-09-25

    Shared electronic health and social care records in some service systems are already showing some of the benefits of digital technology and digital data for integrating health and social care. These records are one example of the beginning "digitalisation" of services that gives a glimpse of the potential of digital technology and systems for building coordinated and individualized integrated care. Yet the promise has been greater than the benefits, and progress has been slow compared to other industries. This paper describes for non-technical readers how information technology was used to support integrated care schemes in six EU services, and suggests practical ways forward to use the new opportunities to build person-centered integrated care.

  9. Aerospace Communications Technologies in Support of NASA Mission

    Science.gov (United States)

    Miranda, Felix A.

    2016-01-01

    NASA is endeavoring in expanding communications capabilities to enable and enhance robotic and human exploration of space and to advance aero communications here on Earth. This presentation will discuss some of the research and technology development work being performed at the NASA Glenn Research Center in aerospace communications in support of NASAs mission. An overview of the work conducted in-house and in collaboration with academia, industry, and other government agencies (OGA) to advance radio frequency (RF) and optical communications technologies in the areas of antennas, ultra-sensitive receivers, power amplifiers, among others, will be presented. In addition, the role of these and other related RF and optical communications technologies in enabling the NASA next generation aerospace communications architecture will be also discussed.

  10. Knowledge Management Technology for Decision Support: an empirical examination

    Directory of Open Access Journals (Sweden)

    Meliha Handzic

    2001-11-01

    Full Text Available This paper reports the results of an empirical examination of the effectiveness of one type of knowledge management technology, namely 'contextual knowledge repository', for supporting individual decision makers in a predictive judgement task context. 31 volunteer subjects participated in the study. The results indicate that a given technology was fairly useful, but insufficient to maximally enhance individual decision making. On one hand, subjects were found to extract more knowledge and make significantly smaller decision errors than their notional naive counterparts. On the other hand, subjects tended to extract less knowledge and make significantly larger decision errors compared to notional optimal counterparts. These findings suggest that individuals could potentially benefit from those knowledge management technologies that would provide additional explicit analytical and procedural knowledge, or those that would facilitate sharing of tacit knowledge through interaction with others. Future research is necessary to address these issues.

  11. Automatic technological control system of the Kolsk NPP Unit-1

    International Nuclear Information System (INIS)

    Volkov, A.P.; Dolgov, A.S.; Zinov'ev, S.V.; Ignatenko, E.I.; Katasonov, Yu.P.; Kolomtsev, Yu.V.; Mel'nikov, E.F.; Reznik, V.R.; Trofimov, B.A.

    1981-01-01

    Reconstruction of the present centralized control system with application of a new small SM2-9 computer and reactor control system ''Jailyk'' is started at the Kolsk NPP (KNPP). Presented are the flowsheet of the technological process automatic control system (TRACS) of the KNPP first generation after reconstruction, by stage diagram conducting organizational-technical measures on the TP ACS reconstruction and communication flowsheet of the IV-500 MA information subsystem with the SM2-9 computer. The TP ACS reconstruction will make it possible to obtain the unit power up to 115% from the nominal one [ru

  12. Next Generation Life Support Project: Development of Advanced Technologies for Human Exploration Missions

    Science.gov (United States)

    Barta, Daniel J.

    2012-01-01

    Next Generation Life Support (NGLS) is one of several technology development projects sponsored by the National Aeronautics and Space Administration s Game Changing Development Program. NGLS is developing life support technologies (including water recovery, and space suit life support technologies) needed for humans to live and work productively in space. NGLS has three project tasks: Variable Oxygen Regulator (VOR), Rapid Cycle Amine (RCA) swing bed, and Alternative Water Processing. The selected technologies within each of these areas are focused on increasing affordability, reliability, and vehicle self sufficiency while decreasing mass and enabling long duration exploration. The RCA and VOR tasks are directed at key technology needs for the Portable Life Support System (PLSS) for an Exploration Extravehicular Mobility Unit (EMU), with focus on prototyping and integrated testing. The focus of the Rapid Cycle Amine (RCA) swing-bed ventilation task is to provide integrated carbon dioxide removal and humidity control that can be regenerated in real time during an EVA. The Variable Oxygen Regulator technology will significantly increase the number of pressure settings available to the space suit. Current spacesuit pressure regulators are limited to only two settings while the adjustability of the advanced regulator will be nearly continuous. The Alternative Water Processor efforts will result in the development of a system capable of recycling wastewater from sources expected in future exploration missions, including hygiene and laundry water, based on natural biological processes and membrane-based post treatment. The technologies will support a capability-driven architecture for extending human presence beyond low Earth orbit to potential destinations such as the Moon, near Earth asteroids and Mars.

  13. Reliability Impacts in Life Support Architecture and Technology Selection

    Science.gov (United States)

    Lange Kevin E.; Anderson, Molly S.

    2012-01-01

    Quantitative assessments of system reliability and equivalent system mass (ESM) were made for different life support architectures based primarily on International Space Station technologies. The analysis was applied to a one-year deep-space mission. System reliability was increased by adding redundancy and spares, which added to the ESM. Results were thus obtained allowing a comparison of the ESM for each architecture at equivalent levels of reliability. Although the analysis contains numerous simplifications and uncertainties, the results suggest that achieving necessary reliabilities for deep-space missions will add substantially to the life support ESM and could influence the optimal degree of life support closure. Approaches for reducing reliability impacts were investigated and are discussed.

  14. Supporting the information domains of fall-risk management in home care via health information technology.

    Science.gov (United States)

    Alhuwail, Dari; Koru, Güneş; Mills, Mary Etta

    2016-01-01

    In the United States, home care clinicians often start the episode of care devoid of relevant fall-risk information. By collecting and analyzing qualitative data from 30 clinicians in one home health agency, this case study aimed to understand how the currently adopted information technology solutions supported the clinicians' fall-risk management (FRM) information domains, and explored opportunities to adopt other solutions to better support FRM. The currently adopted electronic health record system and fall-reporting application served only some information domains with a limited capacity. Substantial improvement in addressing the FRM information domains is possible by effectively modifying the existing solutions and purposefully adopting new solutions.

  15. Professional Support, London: the professional development unit supporting practitioner well-being, refreshment, remediation and revalidation.

    Science.gov (United States)

    Whiteman, Julia; Morris, Penny; Halpern, Helen

    2013-01-01

    London' s Professional Support Unit (PSU) was launched in April 2012 at a time when changes and financial pressures across the health service were placing considerable demand on the medical and dental workforce. At the same time the infrastructure to support medical revalidation was established. The PSU provides developmental support to clinicians across London in all career grades and specialities, to sustain and restore them to contribute effectively to health service delivery across the capital. The costs of medical training are high. Maintaining doctors at work has to be cost effective. Clinicians in multicultural London require diverse resources, as increasing numbers have trained abroad. The PSU offers a holistic, tailor-made approach to professional and personal development with a range of resources and approaches. It provides proven high quality educational interventions, creating a linked and integrated service, providing clinicians with new opportunities. Access is by self-referral with resources targeted at those going through transitions in their professional lives, as well as those who have specific developmental needs. A collaborative approach across the PSU and its education and governance communities ensured the provision of personal support to over 1300 clinicians in its first year, together with interdisciplinary group learning opportunities. Online materials were created to assist individuals, workplace groups and a broad network of support and expertise. To maximise the effectiveness of the service, learning events were also held for those working within the PSU. In commending the PSU and its positive impact, the General Medical Council has recommended the model be shared nationally. At the same time the London's three Local Education Training Boards have recommended that the PSU expand to encompass a more diverse range of professional groups. Our challenge is how to extend such flexible, responsive and values-based support across the workforce

  16. The Virtual Learning Commons: Supporting Science Education with Emerging Technologies

    Science.gov (United States)

    Pennington, D. D.; Gandara, A.; Gris, I.

    2012-12-01

    The Virtual Learning Commons (VLC), funded by the National Science Foundation Office of Cyberinfrastructure CI-Team Program, is a combination of Semantic Web, mash up, and social networking tools that supports knowledge sharing and innovation across scientific disciplines in research and education communities and networks. The explosion of scientific resources (data, models, algorithms, tools, and cyberinfrastructure) challenges the ability of educators to be aware of resources that might be relevant to their classes. Even when aware, it can be difficult to understand enough about those resources to develop classroom materials. Often emerging data and technologies have little documentation, especially about their application. The VLC tackles this challenge by providing mechanisms for individuals and groups of educators to organize Web resources into virtual collections, and engage each other around those collections in order to a) learn about potentially relevant resources that are available; b) design classes that leverage those resources; and c) develop course syllabi. The VLC integrates Semantic Web functionality for structuring distributed information, mash up functionality for retrieving and displaying information, and social media for discussing/rating information. We are working to provide three views of information that support educators in different ways: 1. Innovation Marketplace: supports users as they find others teaching similar courses, where they are located, and who they collaborate with; 2. Conceptual Mapper: supports educators as they organize their thinking about the content of their class and related classes taught by others; 3. Curriculum Designer: supports educators as they generate a syllabus and find Web resources that are relevant. This presentation will discuss the innovation and learning theories that have informed design of the VLC, hypotheses about the use of emerging technologies to support innovation in classrooms, and will include a

  17. Concerning Information Support of the Russian Federation Technological Development

    Directory of Open Access Journals (Sweden)

    M. F. Mizintseva

    2017-01-01

    Full Text Available Purpose: the main of the article is to clarify the theoretical and methodological concept of the need for high-quality operational information support for technological development in the Russian Federation on the basis of scientific infocommunications. Methods: the methodical basis of this article is the economic and statistical methods of analysis, regulatory and legal documents in the field of information support of technological development in the Russian Federation, as well as open analytical materials on key aspects of the topic under study. Results: the article substantiates that a scientific journal is the main means of scientific infocommunications. On the example of the "innovation" direction, a comparative analysis of the publication activity of Russian authors (an information search in the VINITI database of the RAS and foreign authors (information search in the Scopus Database was carried out. Conclusions and Relevance: at present, there is an exponential growth in the number of new peer-reviewed scientific journals, which indicates the rapid formation of scientific communities. It is noted that with increasing scales of scientific research and their complication, the role of the scientific information system is growing.  At the same time, information support requires significant development, modernization and development of the foundations for the formation of a barrier-free environment on the basis of scientific infocommunications. To implement the strategy of technological development in the Russian Federation, an actual information support system should be an integral element, the connecting elements of which are scientific infocommunications.  

  18. Use of health information technology by children's hospitals in the United States.

    Science.gov (United States)

    Menachemi, Nir; Brooks, Robert G; Schwalenstocker, Ellen; Simpson, Lisa

    2009-01-01

    The purpose of this study was to examine the adoption of health information technology by children's hospitals and to document barriers and priorities as they relate to health information technology adoption. Primary data of interest were obtained through the use of a survey instrument distributed to the chief information officers of 199 children's hospitals in the United States. Data were collected on current and future use of a variety of clinical health information technology and telemedicine applications, organizational priorities, barriers to use of health information technology, and hospital and chief information officer characteristics. Among the 109 responding hospitals (55%), common clinical applications included clinical scheduling (86.2%), transcription (85.3%), and pharmacy (81.9%) and laboratory (80.7%) information. Electronic health records (48.6%), computerized order entry (40.4%), and clinical decision support systems (35.8%) were less common. The most common barriers to health information technology adoption were vendors' inability to deliver products or services to satisfaction (85.4%), lack of staffing resources (82.3%), and difficulty in achieving end-user acceptance (80.2%). The most frequent priority for hospitals was to implement technology to reduce medical errors or to promote safety (72.5%). This first national look at health information technology use by children's hospitals demonstrates the progress in health information technology adoption, current barriers, and priorities for these institutions. In addition, the findings can serve as important benchmarks for future study in this area.

  19. The JET technology program in support of ITER

    Energy Technology Data Exchange (ETDEWEB)

    Batistoni, P., E-mail: paola.batistoni@jet.efda.org [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Associazione EURATOM ENEA sulla Fusione, Via E. Fermi 45, I-00044 Frascati (Rome) (Italy); Likonen, J. [Association EURATOM-TEKES, VTT, PO Box 1000, 02044 VTT Espoo (Finland); Bekris, N. [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Brezinsek, S. [Association EURATOM-Forschungszentrum Jülich, IPP, D-52425 Jülich (Germany); Coad, P. [EURATOM CCFE Fusion Association, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Horton, L. [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Matthews, G. [EURATOM CCFE Fusion Association, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Rubel, M. [Royal Institute of Technology, Association EURATOM-VR, 100 44 Stockholm (Sweden); Sips, G. [JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Syme, B.; Widdowson, A. [EURATOM CCFE Fusion Association, Culham Science Centre, Abingdon OX14 3DB (United Kingdom)

    2014-10-15

    This paper presents an overview of the current and planned technological activities at JET in support of ITER operation and safety. The scope is very broad and it ranges from analysis of components from the ITER-like Wall (ILW) to determine material erosion and deposition, dust generation and fuel retention to neutronics measurements and analyses. Preliminary results are given of the post-mortem analyses of samples exposed to JET plasmas during the first JET-ILW operation in 2011–2012, and retrieved during the following in-vessel intervention. JET is the only fusion machine capable of producing significant neutron yields, up to nearly 10{sup 19} n/s (14.1 MeV) in DT operations. Recently, the technological potential of a new DT campaign at JET in support of ITER has been explored and the outcome of this assessment is presented. The expected 14 MeV neutron yield, the use of tritium, the preparation and implementation of safety measures will provide a unique occasion to gain experience in several ITER relevant technological areas. A number of projects and experiments to be conducted in conjunction with the DT operation have been identified and they are described in this paper.

  20. Scaling Impacts in Life Support Architecture and Technology Selection

    Science.gov (United States)

    Lange, Kevin

    2016-01-01

    For long-duration space missions outside of Earth orbit, reliability considerations will drive higher levels of redundancy and/or on-board spares for life support equipment. Component scaling will be a critical element in minimizing overall launch mass while maintaining an acceptable level of system reliability. Building on an earlier reliability study (AIAA 2012-3491), this paper considers the impact of alternative scaling approaches, including the design of technology assemblies and their individual components to maximum, nominal, survival, or other fractional requirements. The optimal level of life support system closure is evaluated for deep-space missions of varying duration using equivalent system mass (ESM) as the comparative basis. Reliability impacts are included in ESM by estimating the number of component spares required to meet a target system reliability. Common cause failures are included in the analysis. ISS and ISS-derived life support technologies are considered along with selected alternatives. This study focusses on minimizing launch mass, which may be enabling for deep-space missions.

  1. Supporting Solar Power in Renewables Portfolio Standards: Experience from the United States

    Energy Technology Data Exchange (ETDEWEB)

    Wiser, Ryan; Barbose, Galen; Holt, Edward

    2010-10-01

    Among the available options for encouraging the increased deployment of renewable electricity, renewables portfolio standards (RPS) have become increasingly popular. The RPS is a relatively new policy mechanism, however, and experience with its use is only beginning to emerge. One key concern that has been voiced is whether RPS policies will offer adequate support to a wide range of renewable energy technologies and applications or whether, alternatively, RPS programs will favor a small number of the currently least-cost forms of renewable energy. This report documents the design of and early experience with state-level RPS programs in the United States that have been specifically tailored to encourage a wider diversity of renewable energy technologies, and solar energy in particular. As shown here, state-level RPS programs specifically designed to support solar have already proven to be an important, albeit somewhat modest, driver for solar energy deployment, and those impacts are projected to continue to build in the coming years. State experience in supporting solar energy with RPS programs is mixed, however, and full compliance with existing requirements has not been achieved. The comparative experiences described herein highlight the opportunities and challenges of applying an RPS to specifically support solar energy, as well as the importance of policy design details to ensuring that program goals are achieved.

  2. TUTOR SUPPORT OF TEACHING MATHEMATICS WITH INFORMATION AND COMMUNICATION TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Kateryna P. Osadcha

    2017-10-01

    Full Text Available The paper describes the tutor activity in the process of mathematics teaching support on the basis of the use of information and communication technologies (ICT. The author has analysed the available Internet resources and mobile applications in mathematics, which are classified according to their functional purposes into groups: systems of mass open courses, platforms for adaptive learning, video channels, mathematical online simulators, online tasks, mathematical games, mathematical portals, online platforms, mathematical sites, mathematical online platforms, mathematical services, mobile applications in mathematics (simulators, games, generators of example, assistant programs, training complexes, calculators. In accordance with the student age categories mathematical information and communication technologies are divided into three groups: for elementary school students, secondary school students and high school students. The basic ICT tools for teaching mathematics are outlined. The algorithm for constructing tutorial classes with their application is presented.

  3. Development of Beam Utilization Technologies and Support for Users

    International Nuclear Information System (INIS)

    Kim, Kyeryung; Jung, Myunghwan; Noh, Yongoh; Lee, Sooyeon; Kim, Hyukwook; Kil, Jaekeun; Lee, Nayoung; Ra, Sekin; Lee, Miejeen; Kim, Sora

    2013-02-01

    The Final goals are to achieve the 2nd goals of the Proton Engineering Frontier Project, development of proton beam utilization technologies, to incubate the potential users, and to develop fundamental technologies. Based on these achievements, we are going to enhance the accelerator utilization and maximize contribution to the local society after accelerator construction completion. For the these goals, we were operating user program reflecting the results of 3rd step planning. We support 38 small projects during 2 years. As results of activation of beam utilization, we acquired 768 users at the end of 2012. We survey proton beam technology proposals, individuals and institutions participation letter of intent through the research of 'Planning of a support program for both basic research by using accelerator and manpower cultivation'. And inaugurated KOPUA (Korea Proton Accelerator User Association) on March 28, 2012 with 152 members. We secured experimental conditions at TR23 and TR103 and reflected in the target room design and operation scenarios via investigate the requirements. Through these requirements, we make a remote sample transfer system, beam regulating system, hot cell and sample transport container. Moreover, we develop proton beam technologies such as in-vivo proton beam irradiation system, comparison of the biological effects for pulse beam and continuous beam, basic experiments for the metal nanopaticle synthesis, research for radioactivatied samples and devices, conceptual design and calculation for neutron source target and calculation of the isotope production yield. Proton accelerator can be utilized in a variety of field, including NT, BT, IT, ST, ET, Nuclear, medical, and some of the user facilities required were constructed through this project, Experience for the construction and operation of these facilities can be reflected to the construction of the rest 8 target room of proton accelerator center

  4. Developing Effluent Analysis Technologies to Support Nonproliferation Initiatives, Arms Control and Nonproliferation Technologies, Third quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    Schubert, S A; Staehle, G; Alonzo, G M [eds.

    1995-01-01

    This issue provides an overview of the Effluent Research Program of the DOE Office of Research and Development, highlighting a number of representative projects within this program in support of nonproliferation initiatives. Technologies reported include portable instruments for on-site inspections, standoff detectors, fieldable, real-time instruments, field collection techniques, and ultrasensitive laboratory techniques.

  5. NPL support for environmental radioactivity measurements in the United Kingdom

    International Nuclear Information System (INIS)

    Jerome, Simon

    2009-01-01

    Full text: The United Kingdom was one of the first nations to initiate a civil nuclear power programme in the 1950s, with the first commercial generation of electricity being achieved in 1957. As the civil nuclear programme grew in size, an ongoing programme of environmental monitoring was instituted by central government that placed the responsibility for monitoring radioactivity in the local environment and the measurement of discharges of radioactive gases and liquids with the site operator, the Environment Agency, the Environment and Heritage Service, the Food Standards Agency and the Scottish Environment Protection Agency (or their predecessors). This presentation will discuss the sources of radioactivity in the UK environment from the nuclear industry, natural and other sources, focussing on how these sources of radioactivity are monitored and what future trends may be, taking the Windscale fire of 1957, the Chernobyl accident and the Litvinenko incident of 2006 as examples of how unexpected events have been addressed in the UK. As the national metrology institute for the UK, the NPL is required to provide support to the National Measurement System infrastructure of the UK, including the measurement of radioactivity. The presentation will also describe the absolute standardisation of radioactivity at the NPL, and how this is disseminated to organisations measuring environmental radioactivity in the UK by means of directly traceable standards of radioactivity and through the provision of an ongoing series of proficiency test exercises. The outcomes of some recent proficiency tests will be discussed, with emphasis on how the general performance of laboratories participating in these proficiency tests has matured over the years since their inception in 1989. In addition, the data treatment of such proficiency tests will also be examined in order to illustrate that statutory regulatory bodies, laboratory accreditation organisations and customers are able to

  6. Technology-Supported Art as a "Way to Participation"

    Directory of Open Access Journals (Sweden)

    Molly Bathje MS, OTR/L

    2014-04-01

    Full Text Available Brianna Vitale provided the painting featured on the cover of the Spring 2014 issue of The Open Journal of Occupational Therapy. Brianna completed the painting, titled “Flamingo,” using a mouth joystick (joust to draw the image on her computer and an assistive device to translate her computer artwork into the watercolor painting. At 12 years old, Brianna has been living for the past 9 years with tetraplegia, the result of a spinal cord injury (SCI. Through technology and with the support of family, friends, and health care professionals, Brianna energetically engages in a variety of creative, social, and philanthropic activities.

  7. Fiscal 1994 achievement report 1/2. Coal liquefaction technology development - Bituminous coal liquefaction technology development - Study for supporting pilot plant - Study using 1t/d PSU (Study of operation using PSU); 1994 nendo seika hokokusho 1/2. Sekitan ekika gijutsu kaihatsu - Rekiseitan ekika gijutsu no kaihatsu - Pilot plant no shien kenkyu - 1t/d process support unit (PSU) ni yoru kenkyu (PSU ni yoru unten kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The operation of a 1t/d PSU (process support unit) was studied in the NEDOL coal liquefaction process. Modification was made, which involved the installation of a high-temperature/high-pressure sampling device for observing reaction and fluidity in the liquefaction reactor, a differential pressure measuring device, and a neutron attenuation-aided measuring device. Relative to coal injection, a 49.5-day and 49.3-day slurry injections were carried out using Tanito Harum coal, when impacts on the product yield and the operability of the unit were examined. A verification test was conducted for an improved hydrogenation catalyst, and liquefaction reactor characteristics were investigated. During a 19-day operation for the study of maintenance, newly installed equipment and devices were verified for function, and operating methods were probed into. In the survey of environments, characteristics were examined of the wastewater discharged from the Tanito Harum coal liquefaction process, and wastewater treatment methods were studied. The air, odor, and tar mist were examined with the PSU in operation, and the measured values were found to be below the management limits showing that its operation did not pose any problems relating to working environments. (NEDO)

  8. Advanced intelligent computational technologies and decision support systems

    CERN Document Server

    Kountchev, Roumen

    2014-01-01

    This book offers a state of the art collection covering themes related to Advanced Intelligent Computational Technologies and Decision Support Systems which can be applied to fields like healthcare assisting the humans in solving problems. The book brings forward a wealth of ideas, algorithms and case studies in themes like: intelligent predictive diagnosis; intelligent analyzing of medical images; new format for coding of single and sequences of medical images; Medical Decision Support Systems; diagnosis of Down’s syndrome; computational perspectives for electronic fetal monitoring; efficient compression of CT Images; adaptive interpolation and halftoning for medical images; applications of artificial neural networks for real-life problems solving; present and perspectives for Electronic Healthcare Record Systems; adaptive approaches for noise reduction in sequences of CT images etc.

  9. Supporting students' knowledge integration with technology-enhanced inquiry curricula

    Science.gov (United States)

    Chiu, Jennifer Lopseen

    Dynamic visualizations of scientific phenomena have the potential to transform how students learn and understand science. Dynamic visualizations enable interaction and experimentation with unobservable atomic-level phenomena. A series of studies clarify the conditions under which embedding dynamic visualizations in technology-enhanced inquiry instruction can help students develop robust and durable chemistry knowledge. Using the knowledge integration perspective, I designed Chemical Reactions, a technology-enhanced curriculum unit, with a partnership of teachers, educational researchers, and chemists. This unit guides students in an exploration of how energy and chemical reactions relate to climate change. It uses powerful dynamic visualizations to connect atomic level interactions to the accumulation of greenhouse gases. The series of studies were conducted in typical classrooms in eleven high schools across the country. This dissertation describes four studies that contribute to understanding of how visualizations can be used to transform chemistry learning. The efficacy study investigated the impact of the Chemical Reactions unit compared to traditional instruction using pre-, post- and delayed posttest assessments. The self-monitoring study used self-ratings in combination with embedded assessments to explore how explanation prompts help students learn from dynamic visualizations. The self-regulation study used log files of students' interactions with the learning environment to investigate how external feedback and explanation prompts influence students' exploration of dynamic visualizations. The explanation study compared specific and general explanation prompts to explore the processes by which explanations benefit learning with dynamic visualizations. These studies delineate the conditions under which dynamic visualizations embedded in inquiry instruction can enhance student outcomes. The studies reveal that visualizations can be deceptively clear

  10. TECHNOLOGY SUPPORTED LEARNING PLATFORM: Moodle Integrated Academic Course

    Directory of Open Access Journals (Sweden)

    Saziye YAMAN

    2010-04-01

    Full Text Available It is substantially accepted that constructivism proposes knowledge as “not a fixed object”; constructed by an individual through her own experiences. As a learning theory, constructivism in education emphasizes collaborative learning, such as authentic challenging projects involving in students, teachers and experts in the learning community. Its goal is to create learning communities that are more closely related to the collaborative practice of the real world as strongly reflected in social constructivist idea. The technologies used in the filed of education will support learning through collaborative practices, using learners’ experiences for “meaning making”. The challenge now is to extend the educational networks so that it offers access to learning resources, online storage and tools for communication and management not just within the limitation of school and time. Through learning platforms, such as Moodle, teachers and administrators may bring hardware, software and supporting services together to enable more effective conditions among teachers and students. In this study, Moodle was used to support the 4th grade pre-service language teachers’ (student teachers one of the academic courses, named as “Field Experience”. The student teachers were expected to prepare graduation theses in the field of English language teaching. Moodle was integrated as a technological learning aid and used as online support throughout a semester course. So, we will discuss how Moodle was integrated as a learning platform, while discussing, the use of Moodle as a “course supporter” process, steps and the sample activities will be presented as well.

  11. PCA safety data review after clinical decision support and smart pump technology implementation.

    Science.gov (United States)

    Prewitt, Judy; Schneider, Susan; Horvath, Monica; Hammond, Julia; Jackson, Jason; Ginsberg, Brian

    2013-06-01

    Medication errors account for 20% of medical errors in the United States with the largest risk at prescribing and administration. Analgesics or opioids are frequently used medications that can be associated with patient harm when prescribed or administered improperly. In an effort to decrease medication errors, Duke University Hospital implemented clinical decision support via computer provider order entry (CPOE) and "smart pump" technology, 2/2008, with the goal to decrease patient-controlled analgesia (PCA) adverse events. This project evaluated PCA safety events, reviewing voluntary report system and adverse drug events via surveillance (ADE-S), on intermediate and step-down units preimplementation and postimplementation of clinical decision support via CPOE and PCA smart pumps for the prescribing and administration of opioids therapy in the adult patient requiring analgesia for acute pain. Voluntary report system and ADE-S PCA events decreased based upon 1000 PCA days; ADE-S PCA events per 1000 PCA days decreased 22%, from 5.3 (pre) to 4.2 (post) (P = 0.09). Voluntary report system events decreased 72%, from 2.4/1000 PCA days (pre) to 0.66/1000 PCA days (post) and was statistically significant (P PCA events between time periods in both the ADE-S and voluntary report system data, thus supporting the recommendation of clinical decision support via CPOE and PCA smart pump technology.

  12. Grid support by power electronic converters of distributed generation units

    NARCIS (Netherlands)

    Morren, J.

    2006-01-01

    An increasing number of small Distributed Generation (DG) units are connected to the grid. The introduction of DG causes several problems, which are mainly related to the differences between DG units and conventional generators. Four problems have been considered in this thesis: damping of

  13. The National Science Foundation's science and technology survey and support for science funding, 2006-2014.

    Science.gov (United States)

    Besley, John C

    2018-01-01

    This study investigates how well the main science and technology focused variables included in the General Social Survey (2006-2014) by the National Science Foundation do in predicting support for science funding. These questions form the primary basis of part of a biannual report to federal lawmakers. It is therefore important to consider whether the most useful variables are included in the survey. The results suggest some bivariate relationships between funding support and demographics, use of science communication channels, science knowledge, and attitudes about science and scientists. However, the overall predictive ability of the available variables appears to be modest when included together as part of multivariate analyses. The results suggest a need for additional discussions aimed at considering revisions to the core survey questions used to track views about science and technology in the United States.

  14. Using information technology to support knowledge conversion processes

    Directory of Open Access Journals (Sweden)

    2001-01-01

    Full Text Available One of the main roles of Information Technology in Knowledge Management programs is to accelerate the speed of knowledge transfer and creation. The Knowledge Management tools intend to help the processes of collecting and organizing the knowledge of groups of individuals in order to make this knowledge available in a shared base. Due to the largeness of the concept of knowledge, the software market for Knowledge Management seems to be quite confusing. Technology vendors are developing different implementations of the Knowledge Management concepts in their software products. Because of the variety and quantity of Knowledge Management tools available on the market, a typology may be a valuable aid to organizations that are looking for answers to specific needs. The objective of this article is to present guidelines that help to design such a typology. Knowledge Management solutions such as intranet systems, Electronic Document Management (EDM, groupware, workflow, artificial intelligence-based systems, Business Intelligence (BI, knowledge map systems, innovation support, competitive intelligence tools and knowledge portals are discussed in terms of their potential contributions to the processes of creating, registering and sharing knowledge. A number of Knowledge Management tools (Lotus Notes, Microsoft Exchange, Business Objects, Aris Toolset, File Net, Gingo, Vigipro, Sopheon have been checked. The potential of each category of solutions to support the transfer of tacit and/or explicit knowledge and to facilitate the knowledge conversion spiral in the sense of Nonaka and Takeuchi (1995 is discussed.

  15. LIDAR technology developments in support of ESA Earth observation missions

    Science.gov (United States)

    Durand, Yannig; Caron, Jérôme; Hélière, Arnaud; Bézy, Jean-Loup; Meynart, Roland

    2017-11-01

    Critical lidar technology developments have been ongoing at the European Space Agency (ESA) in support of EarthCARE (Earth Clouds, Aerosols, and Radiation Explorer), the 6th Earth Explorer mission, and A-SCOPE (Advanced Space Carbon and Climate Observation of Planet Earth), one of the candidates for the 7th Earth Explorer mission. EarthCARE is embarking an Atmospheric backscatter Lidar (ATLID) while A-SCOPE is based on a Total Column Differential Absorption Lidar. As EarthCARE phase B has just started, the pre-development activities, aiming at validating the technologies used in the flight design and at verifying the overall instrument performance, are almost completed. On the other hand, A-SCOPE pre-phase A has just finished. Therefore technology developments are in progress, addressing critical subsystems or components with the lowest TRL, selected in the proposed instrument concepts. The activities described in this paper span over a broad range, addressing all critical elements of a lidar from the transmitter to the receiver.

  16. Smart home technologies for health and social care support.

    Science.gov (United States)

    Martin, Suzanne; Kelly, Greg; Kernohan, W George; McCreight, Bernadette; Nugent, Christopher

    2008-10-08

    The integration of smart home technology to support health and social care is acquiring an increasing global significance. Provision is framed within the context of a rapidly changing population profile, which is impacting on the number of people requiring health and social care, workforce availability and the funding of healthcare systems. To explore the effectiveness of smart home technologies as an intervention for people with physical disability, cognitive impairment or learning disability, who are living at home, and to consider the impact on the individual's health status and on the financial resources of health care. We searched the following databases for primary studies: (a) the Cochrane Effective Practice and Organisation of Care (EPOC) Group Register, (b) the Cochrane Central Register of Controlled Trials (CENTRAL), (The Cochrane Library, issue 1, 2007), and (c) bibliographic databases, including MEDLINE (1966 to March 2007), EMBASE (1980 to March 2007) and CINAHL (1982 to March 2007). We also searched the Database of Abstracts of Reviews of Effectiveness (DARE). We searched the electronic databases using a strategy developed by the EPOC Trials Search Co-ordinator. We included randomised controlled trials (RCTs), quasi-experimental studies, controlled before and after studies (CBAs) and interrupted time series analyses (ITS). Participants included adults over the age of 18, living in their home in a community setting. Participants with a physical disability, dementia or a learning disability were included. The included interventions were social alarms, electronic assistive devices, telecare social alert platforms, environmental control systems, automated home environments and 'ubiquitous homes'. Outcome measures included any objective measure that records an impact on a participant's quality of life, healthcare professional workload, economic outcomes, costs to healthcare provider or costs to participant. We included measures of service satisfaction

  17. Application of Telemedicine Technologies to Long Term Spaceflight Support

    Science.gov (United States)

    Orlov, O. I.; Grigoriev, A. I.

    projects on space biology and medicine at the modern high level. In spite of the ISS international cooperation transparency space research programs require to follow the biomedicine ethics and provide confidentiality of the special medical information exchange. That can be achieved in the telemedicine support system built on the network principle. Presently we have all technical facilities needed to create such a system. In Russia activities on space telemedicicine support improvement are carried out by the State Scientific Center of the Russian Federation - Institute for Biomedical Problems of the Russian Academy of Sciences, Mission Control Center of the Russian Aviation and Space Agency, Space Biomedical Center for Training and Research and Yu. Gagarin Cosmonaut Training Center. Communications development and next generation Internet systems creation almost eliminate differences in the types of information technologies implementation both in the earth-based and near-earth space conditions. In prospect of the information community creation the telecommunication system of the near-earth space objects and its telemedicine element will become a natural part of the Earth unified information field that will open unlimited perspectives for flight support system improvement and space biomedical research conducting. Russia has unique data of numerous investigations on simulation of long, up to a year, effects of space flight factors on the human body. The sphere of situations studied by space medicine specialists embraced orbit manned space flights of the escalating duration (438 days in 1995). However a number of biomedical problems related to space flights didn't face optimal solutions. It's evident that during a space flight to Mars biomedical problems will be much more difficult in comparison with those of the orbit flights of the same duration. The summed up factors of such flights specify a level of the total medical risk that require assessment and application of

  18. Design and Test Plans for a Non-Nuclear Fission Power System Technology Demonstration Unit

    Science.gov (United States)

    Mason, Lee; Palac, Donald; Gibson, Marc; Houts, Michael; Warren, John; Werner, James; Poston, David; Qualls, Arthur Lou; Radel, Ross; Harlow, Scott

    2012-01-01

    A joint National Aeronautics and Space Administration (NASA) and Department of Energy (DOE) team is developing concepts and technologies for affordable nuclear Fission Power Systems (FPSs) to support future exploration missions. A key deliverable is the Technology Demonstration Unit (TDU). The TDU will assemble the major elements of a notional FPS with a non-nuclear reactor simulator (Rx Sim) and demonstrate system-level performance in thermal vacuum. The Rx Sim includes an electrical resistance heat source and a liquid metal heat transport loop that simulates the reactor thermal interface and expected dynamic response. A power conversion unit (PCU) generates electric power utilizing the liquid metal heat source and rejects waste heat to a heat rejection system (HRS). The HRS includes a pumped water heat removal loop coupled to radiator panels suspended in the thermal-vacuum facility. The basic test plan is to subject the system to realistic operating conditions and gather data to evaluate performance sensitivity, control stability, and response characteristics. Upon completion of the testing, the technology is expected to satisfy the requirements for Technology Readiness Level 6 (System Demonstration in an Operational and Relevant Environment) based on the use of high-fidelity hardware and prototypic software tested under realistic conditions and correlated with analytical predictions.

  19. Applications of Advanced Technology for Monitoring Forest Carbon to Support Climate Change Mitigation

    Science.gov (United States)

    Birdsey, R.; Hurtt, G. C.; Dubayah, R.; Hagen, S. C.; Vargas, R.; Nehrkorn, T.; Domke, G. M.; Houghton, R. A.

    2015-12-01

    Measurement, Reporting, and Verification (MRV) is a broad concept guiding the application of monitoring technology to the needs of countries or entities for reporting and verifying reductions in greenhouse gas emissions or increases in greenhouse gas sinks. Credibility, cost-effectiveness, and compatibility are important features of global MRV efforts that can support implementation of climate change mitigation programs such as Reducing Emissions from Deforestation and Forest Degradation and Sustainable Forest Management (REDD+). Applications of MRV technology may be tailored to individual country circumstances following guidance provided by the Intergovernmental Panel on Climate Change; hence, there is no single approach that is uniquely viable but rather a range of ways to integrate new MRV methods. MRV technology is advancing rapidly with new remote sensing and advanced measurement of atmospheric CO2, and in situ terrestrial and ocean measurements, coupled with improvements in data analysis, modeling, and assessing uncertainty. Here we briefly summarize some of the most application-ready MRV technologies being developed under NASA's Carbon Monitoring System (CMS) program, and illustrate how these technologies may be applied for monitoring forests using several case studies that span a range of scales, country circumstances, and stakeholder reporting requirements. We also include remarks about the potential role of advanced monitoring technology in the context of the global climate accord that is expected to result from the 21st session of the Conference of the Parties to the United Nations Framework Convention on Climate Change, which is expected to take place in December 2015, in Paris, France.

  20. Supported liquid membranes technologies in metals removal from liquid effluents

    Directory of Open Access Journals (Sweden)

    de Agreda, D.

    2011-04-01

    Full Text Available The generation of liquid effluents containing organic and inorganic residues from industries present a potential hazardousness for environment and human health, being mandatory the elimination of these pollutants from the respective solutions containing them. In order to achieve this goal, several techniques are being used and among them, supported liquid membranes technologies are showing their potential for their application in the removal of metals contained in liquid effluents. Supported liquid membranes are a combination between conventional polymeric membranes and solvent extraction. Several configurations are used: flat-sheet supported liquid membranes, spiral wounds and hollow fiber modules. In order to improve their effectiveness, smart operations have been developed: non-dispersive solvent extraction, non-dispersive solvent extraction with strip phase dispersion and hollow fiber renewal liquid membrane. This paper overviewed some of these supported liquid membranes technologies and their applications to the treatment of metal-bearing liquid effluents.

    La generación, por parte de las industrias, de efluentes líquidos conteniendo sustancias orgánicas e inorgánicas, es un peligro potencial tanto para los humanos como para el medio ambiente, siendo necesaria la eliminación de estos elementos tóxicos de las disoluciones que los contienen. Para conseguir este fin, se están aplicando diversas técnicas y entre ellas las tecnologías de membranas líquidas soportadas, están demostrando sus aptitudes para la eliminación de metales contenidos en efluentes líquidos. Las membranas líquidas soportadas, resultan de la unión de las membranas poliméricas y de la tecnología de extracción líquido-líquido. Este tipo de membranas se pueden utilizar en diversas configuraciones: plana, módulo en fibra hueca y módulo en espiral y para aumentar su efectividad se están desarrollando las llamadas operaciones avanzadas: extracción no

  1. Supporting global health goals with information and communications technology

    Science.gov (United States)

    Boman, Magnus; Kruse, Erik

    2017-01-01

    ABSTRACT The objective of this study is to critically assess the possible roles of information and communications technology (ICT) in supporting global health goals. This is done by considering privilege and connectibility. In short, ICT can contribute by providing health information via four different kinds of access, each with its own history and prospective future. All four are analyzed here, in two perspectives: business-as-usual and disruptive. Health data analytics is difficult since the digital representation of past, current, and future health information is lacking. The flow of analytics that may prove beneficial to the individual and not just meet abstract population-level goals or ambitions is analyzed in detail. Sensemaking is also needed, to meet the minimum requirement of making prospective future services understandable to policymakers. Drivers as well as barriers for areas in which policy decisions have the potential to drive positive developments for meeting the Sustainable Development Goals are identified. PMID:28838300

  2. An Information Technology Tool to Support Negotiating Teams

    Directory of Open Access Journals (Sweden)

    Jose Montanana

    1995-05-01

    Full Text Available This paper discusses computer-supported large-scale negotiation, in particular, negotiation with advisers. It is claimed that better communication within negotiating teams should lead to longer, more productive sessions than the current ones. To this end, an information technology environment should be provided for the negotiation. The paper introduces SHINE, a collaborative software system developed at the University of Chile. This software has many features to allow rich interactions among advisers belonging to the same team, among negotiators and also between a negotiator and his advisers. Emphasis is placed on the design features to enable and ease these interactions. The facilities include WYSIWIS windows, enhanced electronic mail to send and receive text or video messages with several urgency levels, an evaluation procedure and various ways to state comments and ideas. SHINE has been implemented as a prototype on Sun Sparc workstations.

  3. Fiscal 1995 achievement report 1/2. Coal liquefaction technology development - Bituminous coal liquefaction technology development - Study for supporting pilot plant - Study using 1t/d PSU (Study of operation using PSU); 1995 nendo seika hokokusho 1/2. Sekitan ekika gijutsu kaihatsu - Rekiseitan ekika gijutsu no kaihatsu - Pilot plant no shien kenkyu - 1t/d process support unit (PSU) ni yoru kenkyu (PSU ni yoru kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The operation of a 1t/d PSU (process support unit) was studied for the NEDOL coal liquefaction process. In the modification of facilities, oil product reforming facilities basic designs were prepared enabling the hydrogenation of coal oil after the liquefaction reaction process for reducing hetero compounds in coal oil in the NEDOL process. In the study of operation, pre-operation verification was accomplished under facilities cost performance exploring conditions for the pilot plant and, for the purpose of exploring optimum conditions for the NEDOL process, a 62-day and 25-day slurry injection operations were conducted using Tanito Harum coal and natural pyrite. In a 16-day operation for maintenance, data including mass balance were collected for the investigation of the initial reaction in liquefaction. The specimen sampling section of the high-temperature/high-pressure sampling device, which had been moved to the 3rd liquefaction reactor, was tentatively operated. In the solvent hydrogenation process, 2 hydrogenation reactors were connected in series and then operated for the verification of operationality. (NEDO)

  4. Assisted reproductive technology surveillance--United States, 2011.

    Science.gov (United States)

    Sunderam, Saswati; Kissin, Dmitry M; Crawford, Sara B; Folger, Suzanne G; Jamieson, Denise J; Barfield, Wanda D

    2014-11-21

    Since the first U.S. infant conceived with Assisted Reproductive Technology (ART) was born in 1981, both the use of advanced technologies to overcome infertility and the number of fertility clinics providing ART services have increased steadily in the United States. ART includes fertility treatments in which both eggs and embryos are handled in the laboratory (i.e., in vitro fertilization [IVF] and related procedures). Women who undergo ART procedures are more likely to deliver multiple-birth infants than those who conceive naturally because more than one embryo might be transferred during a procedure. Multiple births pose substantial risks to both mothers and infants, including pregnancy complications, preterm delivery, and low birthweight infants. This report provides state-specific information on U.S. ART procedures performed in 2011 and compares infant outcomes that occurred in 2011 (resulting from procedures performed in 2010 and 2011) with outcomes for all infants born in the United States in 2011. 2011. In 1996, CDC began collecting data on all ART procedures performed in fertility clinics in the United States as mandated by the Fertility Clinic Success Rate and Certification Act of 1992 (FCSRCA) (Public Law 102-493). Data are collected through the National ART Surveillance System (NASS), a web-based data collecting system developed by CDC. In 2011, a total of 151,923 ART procedures performed in 451 U.S. fertility clinics were reported to CDC. These procedures resulted in 47,818 live-birth deliveries and 61,610 infants. The largest numbers of ART procedures were performed among residents of six states: California (18,808), New York (excluding New York City) (14,576), Massachusetts (10,106), Illinois (9,886), Texas (9,576), and New Jersey (8,698). These six states also had the highest number of live-birth deliveries as a result of ART procedures and together accounted for 47.2% of all ART procedures performed, 45.3% of all infants born from ART, and 45.1% of

  5. A Project in Support of Nuclear Technology Cooperation

    International Nuclear Information System (INIS)

    Ko, Young Cheol; Kim, Kyoung Pyo; Yi, Ji Ho

    2007-12-01

    The results and contents of the project are as follows; - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. - Domestic INIS project has carried out various activities on supporting a decision-making for INIS Secretariat, exchanges of the statistical information between INIS and the country, and technical assistance for domestic end-users using INIS database. - Based on the construction of INIS database sent by member states, the data published in the country has been gathered, collected, and inputted to INIS database according to the INIS reference series. - Using the INIS output data, it has provided domestic users with searching INIS CD-ROM DB and INIS online database, INIS SDI service, non-conventional literature delivery services and announce INIS to users. - Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy information and computer software developed in the advanced countries

  6. A Project in Support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Young Cheol; Kim, Kyoung Pyo; Yi, Ji Ho (and others)

    2007-12-15

    The results and contents of the project are as follows; - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. - Domestic INIS project has carried out various activities on supporting a decision-making for INIS Secretariat, exchanges of the statistical information between INIS and the country, and technical assistance for domestic end-users using INIS database. - Based on the construction of INIS database sent by member states, the data published in the country has been gathered, collected, and inputted to INIS database according to the INIS reference series. - Using the INIS output data, it has provided domestic users with searching INIS CD-ROM DB and INIS online database, INIS SDI service, non-conventional literature delivery services and announce INIS to users. - Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy information and computer software developed in the advanced countries.

  7. ANALYSIS AND COMPARISON OF EXISTING DECISION SUPPORT TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    V. A. Rybak

    2016-01-01

    Full Text Available The article presents the results of an analytical review and comparison of the most common managerial decision support technologies: the analytic hierarchy method, neural networks, fuzzy set theory, genetic algorithms and neural-fuzzy modeling. The advantages and disadvantages of these approaches are shown. Determine the scope of their application. It is shown that the hierarchy analysis method works well with the full initial information, but due to the need for expert comparison of alternatives and the selection of evaluation criteria has a high proportion of subjectivity. For problems in the conditions of risk and uncertainty prediction seems reasonable use of the theory of fuzzy sets and neural networks. It is also considered technology collective decision applied both in the general election, and the group of experts. It reduces the time for conciliation meetings to reach a consensus by the preliminary analysis of all views submitted for the plane in the form of points. At the same time the consistency of opinion is determined by the distance between them.

  8. 75 FR 57520 - NASA Advisory Council; Planetary Science Subcommittee; Supporting Research and Technology Working...

    Science.gov (United States)

    2010-09-21

    ... Science Subcommittee; Supporting Research and Technology Working Group; Meeting AGENCY: National... announces a meeting of the Supporting Research and Technology Working Group of the Planetary Science... INFORMATION CONTACT: Dr. Michael New, Planetary Science Division, National Aeronautics and Space...

  9. Fission Surface Power Technology Demonstration Unit Test Results

    Science.gov (United States)

    Briggs, Maxwell H.; Gibson, Marc A.; Geng, Steven M.; Sanzi, James L.

    2016-01-01

    The Fission Surface Power (FSP) Technology Demonstration Unit (TDU) is a system-level demonstration of fission power technology intended for use on manned missions to Mars. The Baseline FSP systems consists of a 190 kWt UO2 fast-spectrum reactor cooled by a primary pumped liquid metal loop. This liquid metal loop transfers heat to two intermediate liquid metal loops designed to isolate fission products in the primary loop from the balance of plant. The intermediate liquid metal loops transfer heat to four Stirling Power Conversion Units (PCU), each of which produce 12 kWe (48 kW total) and reject waste heat to two pumped water loops, which transfer the waste heat to titanium-water heat pipe radiators. The FSP TDU simulates a single leg of the baseline FSP system using an electrically heater core simulator, a single liquid metal loop, a single PCU, and a pumped water loop which rejects the waste heat to a Facility Cooling System (FCS). When operated at the nominal operating conditions (modified for low liquid metal flow) during TDU testing the PCU produced 8.9 kW of power at an efficiency of 21.7 percent resulting in a net system power of 8.1 kW and a system level efficiency of 17.2 percent. The reduction in PCU power from levels seen during electrically heated testing is the result of insufficient heat transfer from the NaK heater head to the Stirling acceptor, which could not be tested at Sunpower prior to delivery to the NASA Glenn Research Center (GRC). The maximum PCU power of 10.4 kW was achieved at the maximum liquid metal temperature of 875 K, minimum water temperature of 350 K, 1.1 kg/s liquid metal flow, 0.39 kg/s water flow, and 15.0 mm amplitude at an efficiency of 23.3 percent. This resulted in a system net power of 9.7 kW and a system efficiency of 18.7 percent.

  10. A Decision Support System for Managing a Diverse Portfolio of Technology Resources

    Science.gov (United States)

    Smith, J.

    2000-01-01

    This paper describes an automated decision support system designed to facilitate the management of a continuously changing portfolio of technologies as new technologies are deployed and older technologies are decommissioned.

  11. Technology-based innovation for independent living: policy and innovation in the United Kingdom, Scandinavia, and the United States.

    Science.gov (United States)

    Berridge, Clara; Furseth, Peder Inge; Cuthbertson, Richard; Demello, Steven

    2014-01-01

    Interest in utilizing technology to help older adults remain living at home is growing; however, uptake remains low. We present a conceptual framework for understanding independent living technology innovation within health and social services. Public policy and innovation in the United States, the United Kingdom, and Scandinavia are profiled as case studies. In all profiled countries, independent living technology is more rapidly advancing than associated state policy, regulation, and payment systems. The findings from this comparative analysis reveal areas for further exploration, including policy subsystem environments in which technologies and services are regulated, as well as trends and desires of older adults and their caregivers within particular cultural contexts.

  12. Communities of practice: pedagogy and internet-based technologies to support educator's continuing technology professional development in higher education

    NARCIS (Netherlands)

    Maurice Schols

    2011-01-01

    Advances in information and communication technologies (ICTs) as well as modern pedagogical perspectives have created new possibilities to facilitate and support learning in higher education (HE). Emerging technologies bring opportunities to reconsider teaching and learning. New ideas and concepts

  13. Using Technology to Support Discussions on Sensitive Topics in the Study of Business Ethics

    Directory of Open Access Journals (Sweden)

    Michelle WL Fong

    2015-06-01

    Full Text Available There is a dearth of research into teaching strategies and learning approaches for units involving sensitive topics that can provoke an emotional response in students. In a business ethics unit, attempts to strike a balance between conceptual knowledge and theory and skills training can be challenging because the unit can involve personal, sensitive or controversial topics. When engaging in deep and meaningful face-to-face discussion, students may unknowingly divulge personal opinions that they later regret or become identified with by other students over time. Value-laden topics may also lead to clashes between students if face-to-face discussions are not managed properly. This paper considers the use of technology in blended learning to provide an optimal learning environment for student discussion on sensitive topics via role-play and simulation in a first-year business ethics unit. The Audience Response System (ARS, online discussion boards and blogs, and wikis are assessed for their suitability in supporting online role-play and simulation. Among these online tools, asynchronous online discussion boards and blogs are the ideal tools for supporting student discussion on sensitive topics in online role-play and simulation.

  14. Application of NASA's Advanced Life Support Technologies in Polar Regions

    Science.gov (United States)

    Bubenheim, David L.

    1997-01-01

    The problems of obtaining adequate pure drinking water and disposing of liquid and solid waste in the U.S Arctic, a region where virtually all water is frozen solid for much of the year, has led to unsanitary solutions. Sanitation and a safe water supply are particularly problems in rural villages. These villages are without running water and use plastic buckets for toilets. The outbreak of diseases is believed to be partially attributable to exposure to human waste and lack of sanitation. Villages with the most frequent outbreaks of disease are those in which running water is difficult to obtain. Waste is emptied into open lagoons, rivers, or onto the sea coast. It does not degrade rapidly and in addition to affecting human health, can be harmful to the fragile ecology of the Arctic and the indigenous wildlife and fish populations. Current practices for waste management and sanitation pose serious human hazards as well as threaten the environment. NASA's unique knowledge of water/wastewater treatment systems for extreme environments, identified in the Congressional Office of Technology Assessment report entitled An Alaskan Challenge: Native Villagt Sanitation, may offer practical solutions addressing the issues of safe drinking water and effective sanitation practices in rural villages. NASA's advanced life support technologies are being combined with Arctic science and engineering knowledge to address the unique needs of the remote communities of Alaska through the Advanced Life Systems for Extreme Environments (ALSEE) project. ALSEE is a collaborative effort involving the NASA, the State of Alaska, the University of Alaska, the North Slope Borough of Alaska, Ilisagvik College in Barrow and the National Science Foundation (NSF). The focus is a major issue in the State of Alaska and other areas of the Circumpolar North; the health and welfare of its people, their lives and the subsistence lifestyle in remote communities, economic opportunity, and care for the

  15. A Project in Support of Nuclear Technology Cooperation

    International Nuclear Information System (INIS)

    Lee, Kyu Jung; Choi, Pyong Hoon; Yi, Ji Ho and others

    2004-12-01

    The result and contents of the project are as follows; - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. - Domestic INIS project has carried out various activities on supporting a decision-making for INIS Secretariat, exchanges of the statistical information between INIS and the country, and technical assistance for domestic end-users using INIS database. - Based on the construction of INIS database sent by member states, the data published in the country has been gathered, collected, and inputted to INIS database according to the INIS reference series. - Using the INIS output data, it has provided domestic users with searching INIS CD-Rom DB and INIS online database, INIS SDI service, non-conventional literature delivery services and announce INIS to users. - Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Effective management of computer codes for nuclear application and establishment of information exchange mechanism for rapid technical support. - acquisition of nuclear computer codes from NEA Data Bank an registration of new software developed by domestic organization

  16. Development of NPP Monitoring and Operation Support Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Park, Jae Chang; Lee, Yong Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)] (and others)

    2008-04-15

    During the first stage (2001.7.1-2004.6.30), we developed general human factors design guidelines VDU-based workstations, PMAS alarm display design guidelines, PMAS SPADES display design guidelines, and the revision of KHNP HFE guidelines (HF-010), which have been applied to domestic NPP designs. We also supported other KNICS projects by performing RPS COM design reviews, development of RPS COM Style Guide, and a review of CEDMCS cabinet operator module display design. We developed the ADIOS prototype, NPP performance analysis systems for YGN No.1, 2 plants and Kori No. 2 plant, alarm cause tracking systems for Kori No. 2 plant and OPR1000, and signal fault detection and diagnosis methods for deaerators and steam generators. During the second stage(2004.7.1-2008.4.30), we supported other KNICS projects by reviewing RPS COM display designs three times, developing ESF-CCS COM style guides and reviewing ESF-CCS COM display design, reviewing CRCS LOM and PCS MTP display designs, and developing requirements for DCS GUI components. We also developed integrated style guide for I and C cabinet operator module display designs. In cooperative research with KOPEC-AE, we developed basic technologies for advanced HSI design including task analysis methods, an information and control requirements database, display design criteria, a HSI prototype with its evaluation, and methods for human factors engineering verification and validation.

  17. Development of NPP Monitoring and Operation Support Technology

    International Nuclear Information System (INIS)

    Lee, Jung Woon; Park, Jae Chang; Lee, Yong Hee

    2008-04-01

    During the first stage (2001.7.1-2004.6.30), we developed general human factors design guidelines VDU-based workstations, PMAS alarm display design guidelines, PMAS SPADES display design guidelines, and the revision of KHNP HFE guidelines (HF-010), which have been applied to domestic NPP designs. We also supported other KNICS projects by performing RPS COM design reviews, development of RPS COM Style Guide, and a review of CEDMCS cabinet operator module display design. We developed the ADIOS prototype, NPP performance analysis systems for YGN No.1, 2 plants and Kori No. 2 plant, alarm cause tracking systems for Kori No. 2 plant and OPR1000, and signal fault detection and diagnosis methods for deaerators and steam generators. During the second stage(2004.7.1-2008.4.30), we supported other KNICS projects by reviewing RPS COM display designs three times, developing ESF-CCS COM style guides and reviewing ESF-CCS COM display design, reviewing CRCS LOM and PCS MTP display designs, and developing requirements for DCS GUI components. We also developed integrated style guide for I and C cabinet operator module display designs. In cooperative research with KOPEC-AE, we developed basic technologies for advanced HSI design including task analysis methods, an information and control requirements database, display design criteria, a HSI prototype with its evaluation, and methods for human factors engineering verification and validation

  18. Supporting Young English Learners in the United States

    Science.gov (United States)

    Barrow, Lisa; Markman-Pithers, Lisa

    2016-01-01

    Simply put, children with poor English skills are less likely to succeed in school and beyond. What's the best way to teach English to young children who aren't native English speakers? In this article, Lisa Barrow and Lisa Markman-Pithers examine the state of English learner education in the United States and review the evidence behind different…

  19. Assisted Reproductive Technology Surveillance — United States, 2012.

    Science.gov (United States)

    Sunderam, Saswati; Kissin, Dmitry M; Crawford, Sara B; Folger, Suzanne G; Jamieson, Denise J; Warner, Lee; Barfield, Wanda D

    2015-08-14

    Since the first U.S. infant conceived with Assisted Reproductive Technology (ART) was born in 1981, both the use of advanced technologies to overcome infertility and the number of fertility clinics providing ART services have increased steadily in the United States. ART includes fertility treatments in which eggs or embryos are handled in the laboratory (i.e., in vitro fertilization [IVF] and related procedures). Because more than one embryo might be transferred during a procedure, women who undergo ART procedures, compared with those who conceive naturally, are more likely to deliver multiple birth infants. Multiple births pose substantial risks to both mothers and infants, including obstetric complications, preterm delivery, and low birthweight infants. This report provides state-specific information for the United States (including Puerto Rico) on ART procedures performed in 2012 and compares infant outcomes that occurred in 2012 (resulting from ART procedures performed in 2011 and 2012) with outcomes for all infants born in the United States in 2012. 2012. In 1996, CDC began collecting data on ART procedures performed in fertility clinics in the United States, as mandated by the Fertility Clinic Success Rate and Certification Act of 1992 (FCSRCA) (Public Law 102-493). Data are collected through the National ART Surveillance System, a web-based data collecting system developed by CDC. This report includes data from 52 reporting areas (the 50 states, the District of Columbia [DC], and Puerto Rico). In 2012, a total of 157,635 ART procedures performed in 456 U.S. fertility clinics were reported to CDC. These procedures resulted in 51,261 live-birth deliveries and 65,151 infants. The largest numbers of ART procedures were performed among residents of six states: California (20,241), New York (19,618), Illinois (10,449), Texas (10,281), Massachusetts (9,754), and New Jersey (8,590). These six states also had the highest number of live-birth deliveries as a result of

  20. The Rationalization of Automatic Units for HPDC Technology

    Directory of Open Access Journals (Sweden)

    A. Herman

    2012-04-01

    Full Text Available The paper deals with problem of optimal used automatic workplace for HPDC technology - mainly from aspects of operations sequence, efficiency of work cycle and planning of using and servicing of HPDC casting machine. Presented are possible ways to analyse automatic units for HPDC. The experimental part was focused on the rationalization of the current work cycle time for die casting of aluminium alloy. The working place was described in detail in the project. The measurements were carried out in detail with the help of charts and graphs mapped cycle of casting workplace. Other parameters and settings have been identified.The proposals for improvements were made after the first measurements and these improvements were subsequently verified. The main actions were mainly software modifications of casting center. It is for the reason that today's sophisticated workplaces have the option of a relatively wide range of modifications without any physical harm to machines themselves. It is possible to change settings or unlock some unsatisfactory parameters.

  1. United States Department of Energy solar receiver technology development

    Science.gov (United States)

    Klimas, P. C.; Diver, R. B.; Chavez, J. M.

    The United States Department of Energy (DOE), through Sandia National Laboratories, has been conducting a Solar Thermal Receiver Technology Development Program, which maintains a balance between analytical modeling, bench and small scale testing, and experimentation conducted at scales representative of commercially-sized equipment. Central receiver activities emphasize molten salt-based systems on large scales and volumetric devices in the modeling and small scale testing. These receivers are expected to be utilized in solar power plants rated between 100 and 200 MW. Distributed receiver research focuses on liquid metal refluxing devices. These are intended to mate parabolic dish concentrators with Stirling cycle engines in the 5 to 25 kW(sub e) power range. The effort in the area of volumetric receivers is less intensive and highly cooperative in nature. A ceramic foam absorber of Sandia design was successfully tested on the 200 kW(sub t) test bed at Plataforma Solar during 1989. Material integrity during the approximately 90-test series was excellent. Significant progress has been made with parabolic dish concentrator-mounted receivers using liquid metals (sodium or a potassium/sodium mixture) as heat transport media. Sandia has successfully solar-tested a pool boiling reflux receiver sized to power a 25 kW Stirling engine. Boiling stability and transient operation were both excellent. This document describes these activities in detail and will outline plans for future development.

  2. United States Domestic Research Reactor Infrastructure - TRIGA Reactor Fuel Support

    Energy Technology Data Exchange (ETDEWEB)

    Morrell, Douglas [Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415 (United States)

    2008-10-29

    The purpose of the United State Domestic Research Reactor Infrastructure Program is to provide fresh nuclear reactor fuel to United States universities at no, or low, cost to the university. The title of the fuel remains with the United States government and when universities are finished with the fuel, the fuel is returned to the United States government. The program is funded by the United States Department of Energy - Nuclear Energy division, managed by Department of Energy - Idaho Field Office, and contracted to the Idaho National Laboratory's Management and Operations Contractor - Battelle Energy Alliance. Program has been at Idaho since 1977 and INL subcontracts with 26 United States domestic reactor facilities (13 TRIGA facilities, 9 plate fuel facilities, 2 AGN facilities, 1 Pulstar fuel facility, 1 Critical facility). University has not shipped fuel since 1968 and as such, we have no present procedures for shipping spent fuel. In addition: floor loading rate is unknown, many interferences must be removed to allow direct access to the reactor tank, floor space in the reactor cell is very limited, pavement ends inside our fence; some of the surface is not finished. The whole approach is narrow, curving and downhill. A truck large enough to transport the cask cannot pull into the lot and then back out (nearly impossible / refused by drivers); a large capacity (100 ton), long boom crane would have to be used due to loading dock obstructions. Access to the entrance door is on a sidewalk. The campus uses it as a road for construction equipment, deliveries and security response. Large trees are on both sides of sidewalk. Spent fuel shipments have never been done, no procedures approved or in place, no approved casks, no accident or safety analysis for spent fuel loading. Any cask assembly used in this facility will have to be removed from one crane, moved on the floor and then attached to another crane to get from the staging area to the reactor room

  3. Supporting solar power in renewables portfolio standards: Experience from the United States

    International Nuclear Information System (INIS)

    Wiser, Ryan; Barbose, Galen; Holt, Edward

    2011-01-01

    Renewables portfolio standards (RPS) have become an increasingly popular option for encouraging the deployment of renewable electricity. It is a relatively new policy mechanism, however, and experience with its use is only beginning to emerge. One key concern is whether RPS policies offer adequate support to a wide range of renewable energy technologies and applications or whether, alternatively, they will favor a small number of the currently least-cost forms of renewable energy. This article documents the design of and early experience with state-level RPS programs in the United States that have been specifically tailored to encourage a wider diversity of renewable energy technologies, and solar energy in particular. As shown here, state-level RPS programs specifically designed to support solar have already proven to be an important driver for solar energy deployment, and those impacts are projected to build in the coming years. State experience in supporting solar energy with RPS programs is mixed, however, and full compliance with existing requirements has not been achieved. The comparative experiences described herein highlight the opportunities and challenges of applying an RPS to specifically support solar energy, as well as the importance of policy design details to ensuring that program goals are achieved. - Research highlights: → Many states have adopted RPS policies with solar or DG set-asides. → Solar and DG set-asides have become a significant driver for solar growth. → Compliance with solar/DG set-aside targets has been mixed. → The estimated retail rate impacts have thus far been relatively modest. → Various emerging issues will affect the future impact of RPS policies on solar growth.

  4. Assisted Reproductive Technology Surveillance - 
United States, 2013.

    Science.gov (United States)

    Sunderam, Saswati; Kissin, Dmitry M; Crawford, Sara B; Folger, Suzanne G; Jamieson, Denise J; Warner, Lee; Barfield, Wanda D

    2015-12-04

    Since the first U.S. infant conceived with assisted reproductive technology (ART) was born in 1981, both the use of ART and the number of fertility clinics providing ART services have increased steadily in the United States. ART includes fertility treatments in which eggs or embryos are handled in the laboratory (i.e., in vitro fertilization [IVF] and related procedures). Women who undergo ART procedures are more likely than women who conceive naturally to deliver multiple-birth infants. Multiple births pose substantial risks to both mothers and infants, including obstetric complications, preterm delivery, and low birthweight infants. This report provides state-specific information for the United States (including Puerto Rico) on ART procedures performed in 2013 and compares infant outcomes that occurred in 2013 (resulting from ART procedures performed in 2012 and 2013) with outcomes for all infants born in the United States in 2013. 2013. In 1996, CDC began collecting data on ART procedures performed in fertility clinics in the United States as mandated by the Fertility Clinic Success Rate and Certification Act of 1992 (FCSRCA) (Public Law 102-493). Data are collected through the National ART Surveillance System (NASS), a web-based data collection system developed by CDC. This report includes data from 52 reporting areas (the 50 states, the District of Columbia [DC], and Puerto Rico). In 2013, a total of 160,521 ART procedures (range: 109 in Wyoming to 20,299 in California) with the intent to transfer at least one embryo were performed in 467 U.S. fertility clinics and were reported to CDC. These procedures resulted in 53,252 live-birth deliveries (range: 47 in Alaska to 6,979 in California) and 66,691 infants (range: 61 in Alaska to 8,649 in California). Nationally, the total number of ART procedures performed per million women of reproductive age (15-44 years), a proxy measure of the ART usage rate, was 2,521 (range: 352 in Puerto Rico to 7,688 in DC). ART use

  5. The technology of the bearings used in the nuclear power generation system turbine generator units

    International Nuclear Information System (INIS)

    Vialettes, J.M.; Rossato, M.

    1997-01-01

    A bearing consists of all the stationary part which allow the relative motion in rotation or in translation, of a shaft line. Inside the bearing there is a journal bearing with a metallic anti-friction coating (the babbitt metal). The high power turbine generator unit rotors are supported by smooth transversal journal bearings fed with oil which fills the empty space and runs along the shaft. The technologies used for the bearings and the thrust bearings of the turbine generator units and the various shaft lines of the French CP0/CP1- and CP2/1300 MW-type nuclear power plants are described. The experience feedback is then discussed in terms of the dynamics of the shaft line, i.e. vibrational problems, the influence of the alignment and the babbitt metal incidents. (author)

  6. Needs assessment for remote systems technology at the Chornobyl Unit 4 shelter

    International Nuclear Information System (INIS)

    Carteret, B.A.; Holliday, M.A.; Jones, E.D.

    1997-12-01

    The accident at Chornobyl Unit 4 on April 26, 1986, resulted in a series of unprecedented scientific and technical challenges. The reactor building was damaged extensively. Following the accident, immediate action was needed to seal off the gaping crater created by the accident, which was a continuing source of airborne contamination. Under extreme conditions, a structure called the open-quotes Shelterclose quotes was built over the remains of the reactor building. The Shelter, which was quickly completed in November 1986, was meant to provide immediate but temporary containment. Now, 11 years later, there are significant concerns about its structural integrity and projected life expectancy. The United States and other participating G-7 countries are supporting nuclear safety upgrade efforts in Eastern Europe with a primary focus on placing the Chornobyl Nuclear Power Plant (ChNPP) Unit 4 Shelter in a stable and environmentally acceptable condition. Application of remote systems technologies will play an important part in achieving the goals of this program. The G-7 nations have agreed to support these efforts, including the identification and development of remote system technologies for fuel removal. However at this time they have taken a firm stance against funding actual fuel removal activities. The U.S. Department of Energy Office of Nuclear Energy, Science and Technology requested that a needs assessment be performed to evaluate the requirements for applying remote systems, including robotics, at the Shelter. This document is intended to be used to identify remote systems needs and requirements at the Shelter and to provide general information on the conditions in the Shelter that could impact the use of remote systems. This document is intended as a source of information to assist those who will be implementing the Shelter Implementation Plan tasks. The document provides background information and general guidance on the application of remote systems

  7. Needs assessment for remote systems technology at the Chornobyl Unit 4 shelter

    Energy Technology Data Exchange (ETDEWEB)

    Carteret, B.A. [Pacific Northwest National Lab., Richland, WA (United States); Holliday, M.A.; Jones, E.D. [Lawrence Livermore National Lab., CA (United States)] [and others

    1997-12-01

    The accident at Chornobyl Unit 4 on April 26, 1986, resulted in a series of unprecedented scientific and technical challenges. The reactor building was damaged extensively. Following the accident, immediate action was needed to seal off the gaping crater created by the accident, which was a continuing source of airborne contamination. Under extreme conditions, a structure called the {open_quotes}Shelter{close_quotes} was built over the remains of the reactor building. The Shelter, which was quickly completed in November 1986, was meant to provide immediate but temporary containment. Now, 11 years later, there are significant concerns about its structural integrity and projected life expectancy. The United States and other participating G-7 countries are supporting nuclear safety upgrade efforts in Eastern Europe with a primary focus on placing the Chornobyl Nuclear Power Plant (ChNPP) Unit 4 Shelter in a stable and environmentally acceptable condition. Application of remote systems technologies will play an important part in achieving the goals of this program. The G-7 nations have agreed to support these efforts, including the identification and development of remote system technologies for fuel removal. However at this time they have taken a firm stance against funding actual fuel removal activities. The U.S. Department of Energy Office of Nuclear Energy, Science and Technology requested that a needs assessment be performed to evaluate the requirements for applying remote systems, including robotics, at the Shelter. This document is intended to be used to identify remote systems needs and requirements at the Shelter and to provide general information on the conditions in the Shelter that could impact the use of remote systems. This document is intended as a source of information to assist those who will be implementing the Shelter Implementation Plan tasks. The document provides background information and general guidance on the application of remote systems.

  8. Assisted reproductive technology surveillance--United States, 2009.

    Science.gov (United States)

    Sunderam, Saswati; Kissin, Dmitry M; Flowers, Lisa; Anderson, John E; Folger, Suzanne G; Jamieson, Denise J; Barfield, Wanda D

    2012-11-02

    Since the birth of the first U.S. infant conceived with Assisted Reproductive Technology (ART) in 1981, use of advanced technologies to overcome the problem of infertility has increased steadily, as has the number of fertility clinics providing ART services in the United States. ART includes fertility treatments in which both eggs and sperm are handled in the laboratory (i.e., in vitro fertilization [IVF] and related procedures). Women who undergo ART procedures are more likely to deliver multiple-birth infants than those who conceive naturally. Multiple births pose substantial risks to both mothers and infants, including pregnancy complications, preterm delivery, and low birthweight infants. This report presents the most recent data on ART use and birth outcomes for U.S. states and territories. 2009. In 1996, CDC began collecting data on all ART procedures performed in the United States, as mandated by the Fertility Clinic Success Rate and Certification Act of 1992 (FCSRCA) (Public Law 102-493 [October 24, 1992]). ART data for 1995-2003 were obtained from the Society of Assisted Reproductive Technology (SART) through its proprietary Clinical Outcomes Reporting System data base (SART CORS). Since 2004, CDC has contracted with Westat, Inc., a statistical survey research organization, to obtain data from fertility clinics in the United States through the National ART Surveillance System (NASS), a web-based data collection system developed by CDC. In 2009, a total of 146,244 ART procedures were reported to CDC. These procedures resulted in 45,870 live-birth deliveries and 60,190 infants. The largest numbers of ART procedures were performed among residents of California (18,405), New York (14,539), Illinois (10,192), Massachusetts (9,845), New Jersey (9,146), and Texas (8,244). Together, these six states reported the highest number of live-birth deliveries as a result of ART and accounted for 48% of all ART procedures initiated, 46% of all infants born from ART, and 45

  9. Control and automation technology in United States nuclear power plants

    International Nuclear Information System (INIS)

    The need to use computers for nuclear power plant design, engineering, operation and maintenance has been growing since the inception of commercial nuclear power electricity generation in the 1960s. The needs have intensified in recent years as the demands of safety and reliability, as well as economic competition, have become stronger. The rapid advance of computer hardware and software technology in the last two decades has greatly enlarged the potential of computer applications to plant instrumentation and control of future plants, as well as those needed for operation of existing plants. The traditional role of computers for mathematical calculations and data manipulation has been expanded to automate plant control functions and to enhance human performance and productivity. The major goals of using computers for instrumentation and control of nuclear power plants are (1) to improve safety; (2) to reduce challenges to the power plant; (3) to reduce the cost of operations and maintenance; (4) to enhance power production, and (5) to increase productivity of people. Many functions in nuclear power plants are achieved by a combination of human action and automation. Increasingly, computer-based systems are used to support operations and maintenance personnel in the performance of their tasks. There are many benefits which can accrue from the use of computers but it is important to ensure that the design and implementation of the support system and the human task places the human in the correct role in relation to the machine; that is, in a management position, with the computer serving the human. In addition, consideration must be given to computer system integrity, software validation and verification, consequences of error, etc., to ensure its reliability for nuclear power plant applications. (author). 31 refs

  10. Meeting the Needs of the Future Force: Transforming Air Support for the Unit of Action

    Science.gov (United States)

    2004-05-26

    forces for the needs of the future. By the year 2010, the current Army organizational structure will be transformed into Units of Employment and Units...of Action. The purpose of this monograph was to test the hypothesis that the current air support system will meet the needs of the Future Force’s Unit

  11. Group cohesion and social support of the nurses in a special unit and a general unit in Korea.

    Science.gov (United States)

    Ko, Yu Kyung

    2011-07-01

    To identify the degree of group cohesion and social support of nurses in special and general units in hospitals in Korea, and to compare group cohesion and social support between the two groups. The level of commitment nurses have to their organizations has been shown to correlate with work group cohesion and social support. The participants were 1751 nurses who were working in Korean hospitals. Data were collected using a structured questionnaire and were analysed using SAS. The statistical methods included: descriptive statistics, t-test, anova and Pearson's correlation coefficients. Group cohesion of nurses on special wards was significantly higher than for nurses on general wards. No significant difference was found between types of units in terms of social support. The degree of group cohesion was significantly different in terms of the respondents' clinical experience, position, religion, job satisfaction, number of supportive superiors and number of supportive peers. A statistically significant correlation was found between group cohesion scores and degree of social support. Hospital management can accomplish their goals more effectively through knowledge of the level of group cohesion, superior support and peer support for nursing staff in accordance with unit specialty. © 2011 The Author. Journal compilation © 2011 Blackwell Publishing Ltd.

  12. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A.

    2012-09-28

    The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify patents related to hydrogen and fuel cells that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents’ current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs that are related to hydrogen and fuel cells.

  13. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A.; Brown, Scott A.

    2011-09-29

    The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). To do this, Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify hydrogen- and fuel-cell-related patents that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of hydrogen- and fuel-cell-related grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs, and within the FCT portfolio.

  14. Supporting clinical practice at the bedside using wireless technology.

    Science.gov (United States)

    Bullard, Michael J; Meurer, David P; Colman, Ian; Holroyd, Brian R; Rowe, Brian H

    2004-11-01

    Despite studies that show improvements in both standards of care and outcomes with the judicious application of clinical practice guidelines (CPGs), their clinical utilization remains low. This randomized controlled trial examined the use of a wirelessly networked mobile computer (MC) by physicians at the bedside with access to an emergency department information system, decision support tools (DSTs), and other software options. Each of ten volunteer emergency physicians was randomized using a matched-pair design to work five shifts in standard fashion (desktop computer [DC] access) and five shifts with a wirelessly networked MC. Work pattern issues and electronic CPG/DST use were compared using end-of-shift satisfaction questionnaires and review of a CPG/DST database. Repeated-measures analysis of variance was used to examine between-shift differences. A total of 100 eight-hour shifts were evaluated; 99% compliance with postshift questionnaires was achieved. Using a seven-point Likert scale (MC values first), MCs were rated as being as fast (5.04 vs. 4.54; p=0.13) and convenient (5.08 vs. 4.14; p=0.07) as DCs. Overall, physicians rated MCs to be less efficient (3.18 vs. 4.30; p=0.02) but encouraged more frequent use of DSTs (4.10 vs. 3.47; p=0.03) without impacting doctor-patient communication (2.78 vs. 2.96; p=0.51). During the study period, physician use of an intranet Web application (eCPG) was more frequent during shifts assigned to the MC when compared with the DC (eCPG uses/shift, 3.6 vs. 2.0; p=0.033). The MC technology permitted physicians to access information at the bedside and increased the use of CPG/DST tools. According to physicians, patients appeared to accept their use of information technology to assist in decision making. Development of improved computer technology may address the major limitation of MC portability.

  15. A project in support of nuclear technology cooperation

    International Nuclear Information System (INIS)

    Jung, Ki Jung; Choi, Pyong Hoon; Lee, Ji Ho

    2003-12-01

    Establish strategies of international cooperation in an effort to promote our nation's leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. Domestic INIS project has carried out various activities on supporting a decision-making for INIS Secretariat, exchanges of the statistical information between INIS and the country, and technical assistance for domestic end-users using INIS database. Based on the construction of INIS database sent by memeber states, the data published in the country has been gathered, collected, and inputted to INIS database according to the INIS reference series. Using the INIS output data, it has provided domestic users with searching INIS CD-ROM DB and INIS online database, INIS SDI service, non-conventional literature delivery services and announce INIS to users. Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing

  16. Technology support in nursing education: clickers in the classroom.

    Science.gov (United States)

    Berry, Janice

    2009-01-01

    Research has shown that the present generation of students has a preference for digital literacy, experiential learning, interactivity, and immediacy; therefore, greater use of technology is being brought into university courses to aid in student involvement. Student Response Systems, called clickers, were incorporated as a teaching methodology to enhance student interaction and learning in a didactic pediatric nursing course. This course was taught over Interactive Television (ITV) with students at a distant site as well as face to face, creating the challenge of whole-class engagement. Clickers were used to actively engage students at both sites simultaneously and give immediate feedback to students regarding understanding of lecture material. Clickers also allowed small-group problem solving of questions. Exam grades and level of participation in case studies were monitored and exam scores and final scores were compared to those of a previous class. Student t-tests demonstrated that one of three course exams and final course grades were significantly higher for the students who used clickers in the classroom. Satisfaction feedback also supported the use of clickers as a tool to engage students and enhance learning outcomes.

  17. Phase Change Permeation Technology for Environmental Control & Life Support Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA is evaluating Dutyion™, a phase change permeation membrane technology developed by Design Technology and Irrigation (DTI), for use in future advanced life...

  18. MIT Lincoln Laboratory: Technology in Support of National Security

    Science.gov (United States)

    2011-01-01

    Carter, Cathy Ho, Ngaire Underhill, Sara James, Jessica Olszta, Jessica Brooks, Melissa May, and Rodolfo Cuevas. Because Lincoln Laboratory is at the...Corporation Applicon Arcon Corporation Ascension Technology Atlantic Aerospace Electronics Axsun Technologies Broadcloud Communications Carl Blake

  19. Organizational Support of Technology Integration in One School in Lebanon

    Science.gov (United States)

    Zgheib, Rosine S.

    2013-01-01

    Technology has been at the center of heated debates in educational settings driving schools to compete for the best technological equipments. However, in Lebanon there is a lag in technology integration matching twenty first century advances. Several barriers related to teacher attitudes, lack of technical skills and organizational constraints to…

  20. Are Key Principles for improved health technology assessment supported and used by health technology assessment organizations?

    Science.gov (United States)

    Neumann, Peter J; Drummond, Michael F; Jönsson, Bengt; Luce, Bryan R; Schwartz, J Sanford; Siebert, Uwe; Sullivan, Sean D

    2010-01-01

    Previously, our group-the International Working Group for HTA Advancement-proposed a set of fifteen Key Principles that could be applied to health technology assessment (HTA) programs in different jurisdictions and across a range of organizations and perspectives. In this commentary, we investigate the extent to which these principles are supported and used by fourteen selected HTA organizations worldwide. We find that some principles are broadly supported: examples include being explicit about HTA goals and scope; considering a wide range of evidence and outcomes; and being unbiased and transparent. Other principles receive less widespread support: examples are addressing issues of generalizability and transferability; being transparent on the link between HTA findings and decision-making processes; considering a full societal perspective; and monitoring the implementation of HTA findings. The analysis also suggests a lack of consensus in the field about some principles--for example, considering a societal perspective. Our study highlights differences in the uptake of key principles for HTA and indicates considerable room for improvement for HTA organizations to adopt principles identified to reflect good HTA practices. Most HTA organizations espouse certain general concepts of good practice--for example, assessments should be unbiased and transparent. However, principles that require more intensive follow-up--for example, monitoring the implementation of HTA findings--have received little support and execution.

  1. Assistive technology and veterans with severe disabilities: examining the relationships among race, personal factors, medical support, income support, and use.

    Science.gov (United States)

    Alston, Reginald; Lewis, Allen; Loggins, Shondra

    2014-10-01

    Examine the relationship among assistive technology (AT), race, and other demographic characteristics (eg, sex, educational attainment, and employment status), medical coverage, as well as government support for veterans with severe disabilities. Data were analyzed from the Rehabilitation Services Administration-911 dataset collected in the United States in 2012. Descriptive and multivariate analyses were performed. Among veterans with severe disabilities, factors that increased AT usage for European Americans (EAs) and African Americans (AAs) were employment, medical coverage (eg, access to private insurance and Medicare), government support (eg, Supplemental Security Income or Social Security Disability Income), and having a sensory type of disability. Having a mental disability was associated with decreased use of AT for EAs and AAs. Whereas EAs) had more factors associated with a decreased likelihood of using AT, AAs had more factors associated with an increased likelihood. For EA veterans with severe disabilities, receiving Medicaid, veteran benefits, and Workers' Compensation were associated with a decreased likelihood of using AT. AA veterans with severe disabilities were 60% less likely to use AT compared with EAs. Racial differences between AAs and EAs were observed in the use of AT by veterans with severe disabilities based on sex, education, employment status, medical coverage, and government support. AAs were generally less likely to use AT; however, greater exposure to resources such as employment, insurance, and government income support partially explained the differential AT use between EAs and AAs. Future policies and research should address these racial disparities in veterans with severe disabilities to promote equitable AT use and healthy functioning.

  2. Usage and applications of Semantic Web techniques and technologies to support chemistry research.

    Science.gov (United States)

    Borkum, Mark I; Frey, Jeremy G

    2014-01-01

    The drug discovery process is now highly dependent on the management, curation and integration of large amounts of potentially useful data. Semantics are necessary in order to interpret the information and derive knowledge. Advances in recent years have mitigated concerns that the lack of robust, usable tools has inhibited the adoption of methodologies based on semantics. THIS PAPER PRESENTS THREE EXAMPLES OF HOW SEMANTIC WEB TECHNIQUES AND TECHNOLOGIES CAN BE USED IN ORDER TO SUPPORT CHEMISTRY RESEARCH: a controlled vocabulary for quantities, units and symbols in physical chemistry; a controlled vocabulary for the classification and labelling of chemical substances and mixtures; and, a database of chemical identifiers. This paper also presents a Web-based service that uses the datasets in order to assist with the completion of risk assessment forms, along with a discussion of the legal implications and value-proposition for the use of such a service. We have introduced the Semantic Web concepts, technologies, and methodologies that can be used to support chemistry research, and have demonstrated the application of those techniques in three areas very relevant to modern chemistry research, generating three new datasets that we offer as exemplars of an extensible portfolio of advanced data integration facilities. We have thereby established the importance of Semantic Web techniques and technologies for meeting Wild's fourth "grand challenge".

  3. University-Industry Entrepreneurship: The Organization and Management of American University Technology Transfer Units.

    Science.gov (United States)

    Dill, David D.

    1995-01-01

    A survey of 289 university technology transfer units investigated their organization, management, and perceived performance effectiveness. Unit types studied included licensing and patent offices, small business development centers, research and technology centers, business facility incubators, and entrepreneurial investment/endowment offices.…

  4. Intranet Prototype for the United States Coast Guard Electronic Systems Support Unit Alameda

    National Research Council Canada - National Science Library

    Benhart, Ralph

    1998-01-01

    ...) Alameda, a small Coast Guard command. To accomplish this task, this thesis will introduce the concept of Intranet technology, portray the efforts required to create an Intranet, and then discuss the benefits associated with Intranet use...

  5. Technology Solutions to Support Care Continuity in Home Care: A Focus Group Study.

    Science.gov (United States)

    Dowding, Dawn W; Russell, David; Onorato, Nicole; Merrill, Jacqueline A

    2017-09-01

    Elevated hospital readmission rates from home care are an indicator of poor care quality, and rates are particularly high for patients with heart failure. Readmissions may be avoided by optimizing continuity of care. To explore perceptions among home care clinicians of the barriers they face and the information they need to improve care continuity for patients with heart failure. Focus groups were conducted with teams of home care clinicians at a large certified home healthcare agency in the Northeastern United states. In total, there were 61 participants across 6 focus groups. Three overarching themes emerged: continuity of care and communication on care transitions, maintaining continuity of care during a home care episode (with subthemes tracking signs and symptoms and patient teaching), and health information technology (HIT) characteristics to support communication and care continuity. Our study highlights areas of improvement for HIT solutions that could support care delivery for patients with heart failure in a home care setting. Home care agencies planning to introduce technology can use these findings to assess if and how potential systems can support nurses to provide continuity of care across healthcare organizations and home care visits.

  6. Developing maintenance technologies for FBR's heat exchanger units by advanced laser processing

    International Nuclear Information System (INIS)

    Nishimura, Akihiko; Shimada, Yukihiro

    2011-01-01

    Laser processing technologies were developed for the purpose of maintenance of FBR's heat exchanger units. Ultrashort laser processing fabricated fiber Bragg grating sensor for seismic monitoring. Fiber laser welding with a newly developed robot system repair cracks on inner wall of heat exchanger tubes. Safety operation of the heat exchanger units will be improved by the advanced laser processing technologies. These technologies are expected to be applied to the maintenance for the next generation FBRs. (author)

  7. Uniting Legislation with RFID Privacy-Enhancing Technologies

    NARCIS (Netherlands)

    Rieback, M.R.; Crispo, B.; Tanenbaum, A.S.

    2005-01-01

    RFID is a popular identification and automation technology with serious security and privacy threats. Legislation expounds upon the actual security and privacy needs of people in RFID-enabled environments, while technology helps to ensure legal compliance. This paper examines the main aims of RFID

  8. WLAN Positioning Methods and Supporting Learning Technologies for Mobile Platforms

    Science.gov (United States)

    Melkonyan, Arsen

    2013-01-01

    Location technologies constitute an essential component of systems design for autonomous operations and control. The Global Positioning System (GPS) works well in outdoor areas, but the satellite signals are not strong enough to penetrate inside most indoor environments. As a result, a new strain of indoor positioning technologies that make use of…

  9. Supporting Friendly Atmosphere in a Classroom by Technology Implementation

    Science.gov (United States)

    Lukaš, Mirko

    2014-01-01

    Extremely rapid development of information technology and the lack of monopoly in the technological market have resulted in a sudden price reduction of the informatic equipment and gadgets enabling them to be used in all segments of a human life, hence the education as well. In the modern, digital era it is almost impossible to make any…

  10. Nuclear technology: katulong sa pag-unlad ng masa [support for the progress of the masses

    International Nuclear Information System (INIS)

    1999-01-01

    The topics discussed during the convention is the usefulness of nuclear science and technology in national development and to promote the beneficial uses of nuclear science and technology to support for the progress of the masses

  11. Seven Affordances of Computer-Supported Collaborative Learning: How to Support Collaborative Learning? How Can Technologies Help?

    Science.gov (United States)

    Jeong, Heisawn; Hmelo-Silver, Cindy E.

    2016-01-01

    This article proposes 7 core affordances of technology for collaborative learning based on theories of collaborative learning and CSCL (Computer-Supported Collaborative Learning) practices. Technology affords learner opportunities to (1) engage in a joint task, (2) communicate, (3) share resources, (4) engage in productive collaborative learning…

  12. United States geothermal technology: Equipment and services for worldwide applications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    This document has two intended audiences. The first part, ``Geothermal Energy at a Glance,`` is intended for energy system decision makers and others who are interested in wide ranging aspects of geothermal energy resources and technology. The second part, ``Technology Specifics,`` is intended for engineers and scientists who work with such technology in more detailed ways. The glossary at the end of the document defines many of the specialized terms. A directory of US geothermal industry firms who provide goods and services for clients around the world is available on request.

  13. Interdisciplinarity and Ubiquitous Internet Technologies in Support of Automation

    Directory of Open Access Journals (Sweden)

    Eduard Babulak Prof., Ph.D., P.Eng., Eur.Ing., C.Eng.,

    2006-02-01

    Full Text Available The Telecommunications and Internet Technologies have evolved dramatically during the last decade, laying solid foundation for the future generation of the Ubiquitous Internet access, omnipresent web technologies and ultimate automated information cyberspace. Recent technological advancements in the areas of global mobility, wireless technologies and miniaturization are driven by the economic and social prosperity. The current state of the art in Differentiated Networks, Health Informatics, Advanced Television, Sensor Networks, MIMO Systems, and recent experiments conducted in the Quantum and Bio Computing open a new horizon for the Future Technologies. As a result, the current efforts in the research and development in the areas of Next Generation of Internet and Telecommunications Technologies promotes formation of inter-disciplinary international teams of experts, scientists, researchers and engineers to create a new generation of applications and technologies that will facilitate the fully-automated information cyberspace systems, such as Future House 2015. The speed and omnipresent accessibility to Internet providing any information at any time from anywhere will create global very complex communications infrastructures. The increased number of Internet sites worldwide will ultimately generate large number of performance bottlenecks and technical faults that may put in danger essential resources for societies world-wide such as energy supplies, national security, financial integrity, transportation logistics and ultimately human safety. The author discusses the current state of the art in the world of Telecommunications and Internet Technologies, new technological trends directions in the Internet and Automation Industries, as well as the concept of the Fully-automated Future House 2015. The paper presents a survey of current developments and future directions in Telecommunications Industry and Automation while promoting research and

  14. Supporting Minority Ethnic Children and Adolescents with Social, Emotional, and Behavioral Difficulties in the United Kingdom

    Science.gov (United States)

    Cooper, Paul

    2006-01-01

    The author addresses the mental health needs of ethnic minority children and young people in the United Kingdom and the services that are provided to support them. The author discusses the complex and distinctive pattern of ethnic minority distribution in the United Kingdom, along with a consideration of what is known about the mental health of…

  15. Does the United States’ Strategic Mobility Program Support the Needs of Operational Commanders

    Science.gov (United States)

    2010-10-01

    engineering and humanitarian relief missions conducted by USSOUTHCOM in Cnetral American and the Carribean . 70 Ibid. 25 vessels with two berths of...Does the United States’ Strategic Mobility Program Support the Needs of Operational Commanders? A Monograph by MAJ Erik E. Hilberg United...per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and

  16. Biofloc technology application in aquaculture to support sustainable development goals.

    Science.gov (United States)

    Bossier, Peter; Ekasari, Julie

    2017-09-01

    Biofloc technology (BFT) application offers benefits in improving aquaculture production that could contribute to the achievement of sustainable development goals. This technology could result in higher productivity with less impact to the environment. Furthermore, biofloc systems may be developed and performed in integration with other food production, thus promoting productive integrated systems, aiming at producing more food and feed from the same area of land with fewer input. The biofloc technology is still in its infant stage. A lot more research is needed to optimise the system (in relation to operational parameters) e.g. in relation to nutrient recycling, MAMP production, immunological effects. In addition research findings will need to be communicated to farmers as the implementation of biofloc technology will require upgrading their skills. © 2017 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

  17. Technology Advancements Enhance Aircraft Support of Experiment Campaigns

    Science.gov (United States)

    Vachon, Jacques J.

    2009-01-01

    For over 30 years, the NASA Airborne Science Program has provided airborne platforms for space bound instrument development, for calibrating new and existing satellite systems, and for making in situ and remote sensing measurements that can only be made from aircraft. New technologies have expanded the capabilities of aircraft that are operated for these missions. Over the last several years a new technology investment portfolio has yielded improvements that produce better measurements for the airborne science communities. These new technologies include unmanned vehicles, precision trajectory control and advanced telecommunications capabilities. We will discuss some of the benefits of these new technologies and systems which aim to provide users with more precision, lower operational costs, quicker access to data, and better management of multi aircraft and multi sensor campaigns.

  18. Decision support for selecting SLM technologies with stakeholders

    NARCIS (Netherlands)

    Schwilch, G.; Bachmann, F.; Graaff, de J.

    2012-01-01

    Sustainable Land Management (SLM) is a classic multi-stakeholder issue, concerning individual and community land users, agricultural advisors, natural resource managers, government authorities, civil society, and researchers alike. Selecting appropriate SLM technologies for implementation requires

  19. Can New Digital Technologies Support Parasitology Teaching and Learning?

    Science.gov (United States)

    Jabbar, Abdul; Gasser, Robin B; Lodge, Jason

    2016-07-01

    Traditionally, parasitology courses have mostly been taught face-to-face on campus, but now digital technologies offer opportunities for teaching and learning. Here, we give a perspective on how new technologies might be used through student-centred teaching approaches. First, a snapshot of recent trends in the higher education is provided; then, a brief account is given of how digital technologies [e.g., massive open online courses (MOOCs), flipped classroom (FC), games, quizzes, dedicated Facebook, and digital badges] might promote parasitology teaching and learning in digital learning environments. In our opinion, some of these digital technologies might be useful for competency-based, self-regulated, learner-centred teaching and learning in an online or blended teaching environment. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. A project in support of Nuclear Technology Cooperation

    International Nuclear Information System (INIS)

    Jung, Ki Jung; Choi, Pyong Hoon; Yi, Ji Ho

    2005-12-01

    Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy informations and computer software developed in the advanced countries. - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate

  1. Biofloc technology application in aquaculture to support sustainable development goals

    OpenAIRE

    Bossier, Peter; Ekasari, Julie

    2017-01-01

    Summary Biofloc technology (BFT) application offers benefits in improving aquaculture production that could contribute to the achievement of sustainable development goals. This technology could result in higher productivity with less impact to the environment. Furthermore, biofloc systems may be developed and performed in integration with other food production, thus promoting productive integrated systems, aiming at producing more food and feed from the same area of land with fewer input. The...

  2. Biofloc technology application in aquaculture to support sustainable development goals

    OpenAIRE

    Bossier, P.; Ekasari, J.

    2017-01-01

    Biofloc technology (BFT) application offers benefits in improving aquaculture production that could contribute to the achievement of sustainable development goals. This technology could result in higher productivity with less impact to the environment. Furthermore, biofloc systems may be developed and performed in integration with other food production, thus promoting productive integrated systems, aiming at producing more food and feed from the same area of land with fewer input. The biofloc...

  3. The unique effects of general and specific support in health care technology: An empirical examination of the principle of compatibility.

    Science.gov (United States)

    Perrigino, Matthew B; Dunford, Benjamin B

    2016-01-01

    The principle of compatibility suggests that specific attitudes should target specific behaviors. The attitude-behavior relationship is contingent upon the consistency between the two. This aim of this study was to examine the strength of relationships involving general versus specific support perceptions and attitudes regarding smart pump technology in hospitals. Specifically, we hypothesized that organizational support perceptions would be more strongly related to general positive work attitudes than it would to smart pump satisfaction. We also hypothesized that smart pump-specific support would be more strongly related to smart pump satisfaction than it would to general positive work attitudes. Data were collected in a cross-sectional field study via online surveys at two large, public hospital systems in the Midwestern United States, one in Iowa (n = 311 nurses) and one in Wisconsin (n = 346 nurses). Because nurses in one system had more experience with smart pump technology than nurses in the other system, analyses were run separately to compare results across the two sites. Consistent with the principle of compatibility, hierarchical regression revealed across both sites that smart pump support had a stronger relationship with smart pump satisfaction whereas general organizational support perceptions had a stronger relationship with general positive work attitudes. In addition, moderation effects were present in one sample where high levels of the noncompatible support (e.g., smart pump-specific support on positive workplace attitudes) buffered low levels of compatible support. Our findings highlight the contextual importance of support in regard to the growing technological transformations that health care systems currently experience. When specific forms of support are provided for specific technologies, end-users will generally respond more favorably compared to when general support is the only available resource.

  4. Work-Centered Support System Technology: A New Interface Client Technology for the Battlespace Infosphere

    National Research Council Canada - National Science Library

    Eggleston, Robert G; Young, Michael J; Whitaker, Randell D

    2000-01-01

    .... Although the infosphere's core web and agent technologies are clearly able to provide a heterogeneous infosphere, improved interface technologies are also needed to address problems of information...

  5. Technological developments in real-time operational hydrologic forecasting in the United States

    Science.gov (United States)

    Hudlow, Michael D.

    1988-09-01

    The hydrologic forecasting service of the United States spans applications and scales ranging from those associated with the issuance of flood and flash warnings to those pertaining to seasonal water supply forecasts. New technological developments (underway in or planned by the National Weather Service (NWS) in support of the Hydrologic Program) are carried out as combined efforts by NWS headquarters and field personnel in cooperation with other organizations. These developments fall into two categories: hardware and software systems technology, and hydrometeorological analysis and prediction technology. Research, development, and operational implementation in progress in both of these areas are discussed. Cornerstones of an overall NWS modernization effort include implementation of state-of-the-art data acquisition systems (including the Next Generation Weather Radar) and communications and computer processing systems. The NWS Hydrologic Service will capitalize on these systems and will incorporate results from specific hydrologic projects including collection and processing of multivariate data sets, conceptual hydrologic modeling systems, integrated hydrologic modeling systems with meteorological interfaces and automatic updating of model states, and extended streamflow prediction techniques. The salient aspects of ongoing work in these areas are highlighted in this paper, providing some perspective on the future U.S. hydrologic forecasting service and its transitional period into the 1990s.

  6. Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider

    OpenAIRE

    Douglas, Heather E; Georgiou, Andrew; Tariq, Amina; Prgomet, Mirela; Warland, Andrew; Armour, Pauline; Westbrook, Johanna I

    2017-01-01

    Introduction: There is limited evidence of the benefits of information and communication technology (ICT) to support integrated aged care services. Objectives: We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to su...

  7. Technology Support for Discussion Based Learning: From Computer Supported Collaborative Learning to the Future of Massive Open Online Courses

    Science.gov (United States)

    Rosé, Carolyn Penstein; Ferschke, Oliver

    2016-01-01

    This article offers a vision for technology supported collaborative and discussion-based learning at scale. It begins with historical work in the area of tutorial dialogue systems. It traces the history of that area of the field of Artificial Intelligence in Education as it has made an impact on the field of Computer-Supported Collaborative…

  8. Modern wireless telecommunication technologies and their electromagnetic compatibility with life-supporting equipment.

    Science.gov (United States)

    Wallin, Mats K E B; Marve, Therese; Hakansson, Peter K

    2005-11-01

    Hospitals rely on pagers and ordinary telephones to reach staff members in emergency situations. New telecommunication technologies such as General Packet Radio Service (GPRS), the third generation mobile phone system Universal Mobile Telecommunications System (UMTS), and Wireless Local Area Network (WLAN) might be able to replace hospital pagers if they are electromagnetically compatible with medical devices. In this study, we sought to determine if GPRS, UMTS (Wideband Code Division Multiple Access-Frequency Division Duplex [WCDMA FDD]), and WLAN (IEEE 802.11b) transmitted signals interfere with life-supporting equipment in the intensive care and operating room environment. According to United States standard, ANSI C63.18-1997, laboratory tests were performed on 76 medical devices. In addition, clinical tests during 11 operations and 100 h of intensive care were performed. UMTS and WLAN signals caused little interference. Devices using these technologies can be used safely in critical care areas and during operations, but direct contact between medical devices and wireless communication devices ought to be avoided. In the case of GPRS, at a distance of 50 cm, it caused an older infusion pump to alarm and stop infusing; the pump had to be reset. Also, 10 cases of interference with device displays occurred. GPRS can be used safely at a distance of 1 m. Terminals/cellular phones using these technologies should be allowed without restriction in public areas because the risk of interference is minimal.

  9. HANDS: A revitalized technology supported care planning method to improve nursing handoffs.

    Science.gov (United States)

    Keenan, Gail; Yakel, Elizabeth; Marriott, Deanna

    2006-01-01

    Care plans are required by the Joint Commission on Accreditation of Healthcare Organizations. Each day nurses create and file these plans in medical records. However, current forms of care plans do little to either enhance the flow of information or communicate shared patient goals. This paper introduces the theoretical model underpinning the HANDS care planning method and presents findings on the first year of a 3-year multisite study in which this method and a new Health Information Technology (HIT) application supporting the process were introduced. The theoretical model is derived from research on high reliability organizations and encompasses collective mind, mindfulness, and heedful interrelating. It focuses on the handoff as a focal point for not only information transfer but also reinforcing shared meaning and goals. The specific application, HANDS, integrates the NANDA, NIC, and NOC terminologies as a means of ensuring shared meaning across shifts and units. Early findings show the method has the potential of revolutionizing nursing practice.

  10. Regional centres for space science and technology education affiliated to the United Nations

    Science.gov (United States)

    Gadimova, Sharafat

    Capacity-building efforts in space science and technology are a major focus of the activities of the Office of Outer Space Affairs. Such efforts include providing support to the regional centres for space science and technology education, affiliated to the United Nations, whose goal is to develop, through in-depth education, an indigenous capability for research and applications in the core disciplines of: (a) remote sensing and geographical information systems; (b) satellite communications; (c) satellite meteorology and global climate; and (d) space and atmospheric sciences and data management. The regional centres are located in Morocco and Nigeria for Africa, in Brazil and Mexico for Latin America and the Caribbean and in India for Asia and the Pacific. The overall policy-making body of each Centre is its Governing Board and consists of member States (within the region where the Centre is located), that have agreed, through their endorsement of the Centre's agreement, to the goals and objectives of the Centre. The United Nations Programme on Space Applications, with the support of prominent educators, has developed standard education curricula, which were adopted by the Centres for teaching each of the four core disciplines. Within the framework of the International Committee on global navigation satellite systems (ICG), which is established as an informal body for the purpose of promoting the use and application of global navigation satellite systems (GNSS) on a global basis, the Regional Centres will also be acting as the ICG Information Centres. The ICG Information Centres aim to foster a more structured approach to information exchange in order to fulfil the reciprocal expectations of a network between ICG and Regional Centres.

  11. Telecommunications technology and rural education in the United States

    Science.gov (United States)

    Perrine, J. R.

    1975-01-01

    The rural sector of the US is examined from the point of view of whether telecommunications technology can augment the development of rural education. Migratory farm workers and American Indians were the target groups which were examined as examples of groups with special needs in rural areas. The general rural population and the target groups were examined to identify problems and to ascertain specific educational needs. Educational projects utilizing telecommunications technology in target group settings were discussed. Large scale regional ATS-6 satellite-based experimental educational telecommunications projects were described. Costs and organizational factors were also examined for large scale rural telecommunications projects.

  12. Prospective technologies and equipment for sanitary hygienic measures for life support systems

    Science.gov (United States)

    Shumilina, I. V.

    Creation of optimal sanitary hygienic conditions is a prerequisite for good health and performance of crews on extended space missions. There is a rich assortment of associated means, methods and equipment developed and experimentally tested in orbital flights. However, over a one-year period a crew of three uses up about 800 kg of ground-supplied wet wipes and towels for personal needs. The degree of closure of life support systems for long-duration orbital flights should be maximized, particularly for interplanetary missions, which exclude any possibility of re-supply. Washing with regenerated water is the ultimate sanitary hygienic goal. That is why it is so important to design devices for crew bathing during long-term space missions. Investigations showed that regeneration of wash water (WW) using membrane processes (reverse osmosis, nanofiltration etc.), unlike sorption, would not require much additional expendables. A two-stage membrane recovery unit eliminated >85% of permeate from real WW with organic and inorganic selectivity of 82 95%. The two-stage WW recovery unit was tested with artificial and real WW containing detergents available for space crews. Investigations into the ways of doing laundry and drying along with which detergents will be the best fit for space flight are also planned. Testing of a technology for water extraction from used textiles using a conventional period of contact of 1 s or more, showed that the humidity of the outgoing air flow neared 100%. Issues related to designing the next generation of space life support systems should consider the benefits of integrating new sanitary hygienic technologies, equipment, and methods.

  13. Communication Technologies Support to Railway Infrastructure and Operations

    DEFF Research Database (Denmark)

    Sniady, Aleksander

    technology. In the research work presented in this thesis, GSM-R technology is analysed and its main shortcomings are identified, namely: lack of capacity, limited data transmission capabilities, and inefficiency in radio resource usage. Due to these significant disadvantages, alternative mobile technologies...... important railway applications: European Train Control System (ETCS) signalling and railway-specific voice communication. Therefore, LTE is technically capable of replacing GSM-R as the communication network for the European Rail Traffic Management System (ERTMS). Moreover, the simulation results show...... availability and reduction of inter-cell handover rate for running trains. It also enables railways to use new high-frequency radio bands, which is not a feasible option in the classical railway radio deployments. Simulation results indicate that the macro/micro architecture offers huge capacity increase...

  14. The Cost-Effectiveness of Supported Employment for Adults with Autism in the United Kingdom

    Science.gov (United States)

    Mavranezouli, Ifigeneia; Megnin-Viggars, Odette; Cheema, Nadir; Howlin, Patricia; Baron-Cohen, Simon; Pilling, Stephen

    2014-01-01

    Adults with autism face high rates of unemployment. Supported employment enables individuals with autism to secure and maintain a paid job in a regular work environment. The objective of this study was to assess the cost-effectiveness of supported employment compared with standard care (day services) for adults with autism in the United Kingdom.…

  15. Withdrawing life-support treatment in the intensive care unit: The ...

    African Journals Online (AJOL)

    Critically ill patients admitted to the intensive care units (ICUs) require treatment methods to support their vital functions of respiration and circulation by means of modalities such as mechanical ventilation and inotropic support. However, when these treatment options are maximised and the patient's condition remains ...

  16. A project in support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Ki Jung; Choi, Pyong Hoon; Yi, Ji Ho (and others)

    2005-12-15

    Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy informations and computer software developed in the advanced countries. - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate.

  17. Pathways to Commercial Success: Technologies and Products Supported by the Hydrogen, Fuel Cells and Infrastructure Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-08-01

    This report documents the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Hydrogen, Fuel Cells and Infrastructure Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  18. Unit support protects against sexual harassment and assault among national guard soldiers.

    Science.gov (United States)

    Walsh, Kate; Galea, Sandro; Cerda, Magdalena; Richards, Catherine; Liberzon, Israel; Tamburrino, Marijo B; Calabrese, Joseph; Koenen, Karestan C

    2014-01-01

    Despite concerns about increased sexual harassment and assault after the 2013 legislation repealing the ban on women in combat, little research has examined military factors that could prevent sexual harassment and assault during deployment. This study examined whether unit support, which reflects the quality of service members' relationships within their unit, protects against sexual harassment and assault during deployment. Participants were 1,674 Ohio Army National Guard service members who reported at least one deployment during a telephone survey conducted in 2008 and 2009. Participants completed measures of sexual harassment/assault, unit support, and psychosocial support. Logistic regression was used to model odds of sexual harassment/assault. Approximately 13.2% of men (n = 198) and 43.5% of women (n = 74) reported sexual harassment, and 1.1% of men (n = 17) and 18.8% of women (n = 32) reported sexual assault during their most recent deployment. Greater unit support was associated with decreased odds of sexual harassment and assault. A substantial proportion of men and women reported sexual harassment/assault. Greater unit support was associated with diminished odds of sexual harassment/assault during deployment. Programming designed to improve unit cohesion has the potential to reduce sexual harassment and assault. Copyright © 2014 Jacobs Institute of Women's Health. Published by Elsevier Inc. All rights reserved.

  19. Unit Support Protects Against Sexual Harassment and Assault among National Guard Soldiers

    Science.gov (United States)

    Walsh, Kate; Galea, Sandro; Cerda, Magdalena; Richards, Catherine; Liberzon, Israel; Tamburrino, Marijo B.; Calabrese, Joseph; Koenen, Karestan C.

    2014-01-01

    Objective Despite concerns about increased sexual harassment and assault following 2013 legislation repealing the ban on women in combat, little research has examined military factors that could prevent sexual harassment and assault during deployment. This study examined whether unit support, which reflects the quality of service members’ relationships within their unit, protects against sexual harassment and assault during deployment. Methods Participants were 1674 Ohio Army National Guard service members who reported at least one deployment during a telephone survey conducted in 2008-2009. Participants completed measures of sexual harassment/assault, unit support, and psychosocial support. Logistic regression was used to model odds of sexual harassment/assault. Results Approximately 13.2% (n=198) of men and 43.5% (n=74) of women reported sexual harassment, and 1.1% (n=17) of men and 18.8% (n=32) of women reported sexual assault during their most recent deployment. Higher unit support was associated with decreased odds of sexual harassment and assault. Conclusions A substantial proportion of men and women reported sexual harassment/assault. Higher unit support was associated with diminished odds of sexual harassment/assault during deployment. Programming designed to improve unit cohesion has potential to reduce sexual harassment and assault. PMID:25442705

  20. Recent technology for nuclear steam turbine-generator units

    International Nuclear Information System (INIS)

    Moriya, Shin-ichi; Kuwashima, Hidesumi; Ueno, Takeshi; Ooi, Masao

    1988-01-01

    As the next nuclear power plants subsequent to the present 1,100 MWe plants, the technical development of ABWRs was completed, and the plan for constructing the actual plants is advanced. As for the steam turbine and generator facilities of 1,350 MWe output applied to these plants, the TC6F-52 type steam turbines using 52 in long blades, moisture separation heaters, butterfly type intermediate valves, feed heater drain pumping-up system and other new technologies for increasing the capacity and improving the thermal efficiency were adopted. In this paper, the outline of the main technologies of those and the state of examination when those are applied to the actual plants are described. As to the technical fields of the steam turbine system for ABWRs, the improvement of the total technologies of the plants was promoted, aiming at the good economical efficiency, reliability and thermal efficiency of the whole facilities, not only the main turbines. The basic specification of the steam turbine facilities for 50 Hz ABWR plants and the main new technologies applied to the turbines are shown. The development of 52 in long last stage blades, the development of the analysis program for the coupled vibration of the large rotor system, the development of moisture separation heaters, the turbine control system, condensate and feed water system, and the generators are described. (Kako, I.)

  1. Adoption of Rice Technologies Introduced by the United States ...

    African Journals Online (AJOL)

    The study determined the levels of adoption of improved rice technologies introduced by USAID MARKETS project phase one in Anambra and Ebonyi States, Nigeria. The population of the study included all project participant rice farmers of USAID MARKETS project in both Anambra and Ebonyi States. A total sample of 80 ...

  2. [Information technology as a support in the area of education].

    Science.gov (United States)

    Sabanović, Z

    1999-01-01

    Decision Support Systems (DSS) are more and more used and developed, mainly within the management area. It is used at strategic level for global planning and managing the organization; at tactical level for short-term planning, process realization and control. Although many authors state that DSS are used only at global and tactical level, some of them--through practical applications--show that specific DSS can be created in order to support decision in other areas than classical management. Paper describes computer application that efficiently supports organisation of exams at The Department for Medical Informatics of Medical Faculty in Tuzla.

  3. Surface based factory for the production of life support and technology support products

    Science.gov (United States)

    1987-01-01

    The presence of a manned space colony on Mars may be expected to involve three phases in the utilization of planetary resources: (1) survival phase in which air, water, and food are produced, (2) self sufficiency phase in which chemicals, fuels, pharmaceuticals, polymers, and metals are produced, and (3) export to earth of materials and technology 1 phase in which the unique advantage of the extraterrestrial environment is fully exploited. The Advanced Design Project is administered as an interdisciplinary effort involving students and faculty throughout the College of Engineering. Senior students from Chemical, Civil, Electrical, and Mechanical Engineering are participating as a team. Multi discipline interfacing and coordination are stressed throughout the project. An interdisciplinary senior design course was developed and offered in the Spring of 1987. The first task of the survival phase is that of providing a supply of water and air adequate to support a ten person colony. The project has been divided into three subgroups: (1) design of a manufacturing and storage facility for air, (2) search and drill for water or water-bearing materials, and (3) retrieve, purify, and store potable water. The conceptual design phase has been completed and the project is being documented. The second task of the survival phase is that of providing a replenish able food supply. This task has two requirements: producing a supply of protein and providing an environment for growing plants for food. For the first requirement, we considered the design of a bioreactor system capable of growing beef cells for protein production. For the second, a design must be developed for a manufacturing system to produce materials needed to build a greenhouse farm.

  4. Using Mobile Technology to Support Literacy Coaching Practices

    Science.gov (United States)

    Bates, C. C.; Martin, Aqueasha

    2013-01-01

    This article examines literacy coaches' (n = 7) digital note-taking practices using mobile technology and their influence on reflective practice. The study, which employed a design-based approach, investigated the coaches' transition from note-taking by paper and pencil to the note-taking application Evernote. Data included interviews with the…

  5. Supporting Student Research with Semantic Technologies and Digital Archives

    Science.gov (United States)

    Martinez-Garcia, Agustina; Corti, Louise

    2012-01-01

    This article discusses how the idea of higher education students as producers of knowledge rather than consumers can be operationalised by means of student research projects, in which processes of research archiving and analysis are enabled through the use of semantic technologies. It discusses how existing digital repository frameworks can be…

  6. Formal Abstraction in Engineering Education--Challenges and Technology Support

    Science.gov (United States)

    Neuper, Walther A.

    2017-01-01

    This is a position paper in the field of Engineering Education, which is at the very beginning in Europe. It relates challenges in the new field to the emerging technology of (Computer) Theorem Proving (TP). Experience shows, that "teaching" abstract models, for instance the wave equation in mechanical engineering and in electrical…

  7. Increasing Students' Involvement in Technology-Supported Mathematics Lesson Sequences

    Science.gov (United States)

    Prodromou, Theodosia; Lavicza, Zsolt; Koren, Balazs

    2015-01-01

    This article aims to report on a pilot or proof of concept study with experienced Hungarian teachers who introduced mathematical concepts through a sequence of lessons utilising a pedagogical framework (Lavicza, Hohenwarter, Jones, Lu and Dawes, 2009a and Lavicza, Hohenwarter and Lu 2009b) for general technology integration. Our aim was to examine…

  8. Radiation protection and safety: for nuclear technology development support

    International Nuclear Information System (INIS)

    San Pedro, A.; Hermida, J.; Fraga, H.

    1996-01-01

    A study about ICRP 60 changes as well as legal aspects and radiation protection activities in Uruguay was reported in this article. Special attention in the personnel dosimetry, radioactive sources control and their national inventory, SSDL, radioactive wastes management and SAMARI system can found among main activities developed in the Radiation Protection and Nuclear Safety Sector in National Nuclear Technology Direction

  9. Technology Applications for Children with ADHD: Assessing the Empirical Support.

    Science.gov (United States)

    Xu, Chunzhen; Reid, Robert; Steckelberg, Allen

    2002-01-01

    This article reviews technology research (n=20) with students with attention deficit hyperactivity disorder (ADHD) in five categories: computer-assisted instruction, computer-based cognitive training, biofeedback training, assessment, and behavior modification. Analysis of available research suggests there is little well controlled experimental…

  10. OLAP TECHNOLOGY AS DECISION-MAKING SUPPORT TOOL

    Directory of Open Access Journals (Sweden)

    D. V. Akushko

    2017-01-01

    Full Text Available The present article discloses the basic principles of work with OLAP technologies, shows key features in comparison with traditional systems of the reporting. The simplified structure of an OLAP cube for the analysis of cost of products of the steelsmelting shop is considered.

  11. TTI Phase 2 Institutional Support: Science, Technology and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    STIPRO's mission is to improve human capacity in science, technology and innovation (STI) policy research. It also aims to raise awareness among government officials and parliamentarians of the critical role of this research for evidence-based STI policies. Its research program focuses on linking food security, agricultural ...

  12. Supporting medical technology development with the analytic hierarchy process

    NARCIS (Netherlands)

    Hummel, J. Marjan

    2001-01-01

    This thesis aims to develop an adequate method of CTA to influence decision making about the development and clinical application of a medical technology. The adequacy of this method is related to the timing of its application, the information used in the assessment, the consensus formation about,

  13. Supporting Striving Readers through Technology-Based Instruction

    Science.gov (United States)

    Laverick, DeAnna M.

    2014-01-01

    The purpose of this research was to determine if reading specialist candidates improve the reading proficiency of their students through the use of digital, technology-based teaching techniques and materials. The candidates were certified teachers who provided individualized and small-group instruction to K-6 children while the candidates were…

  14. Guidelines for supporting placement learning via video communications technologies

    OpenAIRE

    Taylor, Teri

    2014-01-01

    Purpose – Current drivers in higher education have led to the questioning of traditional placement support methods. Within many programmes, students undertaking practice-based learning experience structured, one-to-one support from an academic in the placement location. With the financial and environmental implications of this practice, the potential for using video-based communications as a replacement for face-to-face dialogue was explored. The paper aims to discuss the above issues. \\ud \\u...

  15. Task 4 supporting technology. Densification requirements definition and test objectives. Propellant densification requirements definition

    Science.gov (United States)

    Lak, Tibor; Weeks, D. P.

    1995-01-01

    The primary challenge of the X-33 CAN is to build and test a prototype LO2 and LH2 densification ground support equipment (GSE) unit, and perform tank thermodynamic testing within the 15 month phase 1 period. The LO2 and LH2 propellant densification system will be scaled for the IPTD LO2 and LH2 tank configurations. The IPTD tanks were selected for the propellant technology demonstration because of the potential benefits to the phase 1 plan: tanks will be built in time to support thermodynamic testing; minimum cost; minimum schedule risk; future testing at MSFC will build on phase 1 data base; and densification system will be available to support X-33 and RLV engine test at IPTD. The objective of the task 1 effort is to define the preliminary requirements of the propellant densification GSE and tank recirculation system. The key densification system design parameters to be established in Task 1 are: recirculation flow rate; heat exchanger inlet temperature; heat exchanger outlet temperature; maximum heat rejection rate; vent flow rate (GN2 and GH2); densification time; and tank pressure level.

  16. Using communication technology to support professional development in teaching science

    Science.gov (United States)

    Sundberg, Cheryl White

    The impact of collaboration via communication technology on follow-up to on-site professional development was the central focus of this hypothesis-generating study. The study used a combination of quantitative methodology and qualitative methodology. A convenient sample of 18 teachers was drawn from 208 teachers in an existing professional development program in science in a southeastern state. The statewide professional development program focused on energy education with a strong emphasis on using technology to enhance learning. Data sources included E-mail messages, lesson plans, photographs, workshop evaluations, surveys, and the report of an external reviewer. The study focused on two on-site workshops, February and June 2000 that were designed to model constructivist pedagogy and instruct teachers in effective utilization of computer-based laboratories in science classrooms. Follow-up to the on-site workshops was facilitated with several communication technologies (Internet, E-mail, telephone, and mail). The research found E-mail was the preferred mode for follow-up to on-site workshops because of the convenience of the medium. Barriers to effective distance professional development were time constraints, equipment failure, and lack of consistent Internet access to teachers in rural and under-served areas. Teacher characteristics of the sample, teacher efficacy, technical skill, experience, and constructivist pedagogy did not appear to impact the use of communication technologies as a means of follow-up to on-site professional development workshops. However, teacher efficacy might have negatively impacted effective implementation of calculator-based laboratory technology in the classroom. The study found E-mail was the most convenient and efficient way to facilitate follow-up to on-site professional development. Teacher characteristics (efficacy, technical skill, experience, and constructivist pedagogy) did not appear to impact the use of E-mail to facilitate

  17. FEDERAL SUPPORT OF SCIENTIFIC INQUIRY IN THE UNITED STATES: CURRENT EVOLUTION UNDER THE POLITICAL STRUGGLE

    Directory of Open Access Journals (Sweden)

    I. A. Istomin

    2016-01-01

    Full Text Available 2000’s and 2010’s witnessed diminishing margin of the United States in science and technology. Meanwhile, the U.S. remains a clear leader in this fi eld. Major driving force of the country’s success in the second half of the ХХ century remained assertive federal science policy. The article seeks to identify major trends in evolution of the U.S. science policy and the reasons behind relative decline of the level of budget support of the scientifi c research. The author studies evolution of the policies of George Bush and Barack Obama, as well as the views of Democrats and Republicans in the House of Representatives and the Senate. The article also examines the input into the federal policy of the governmental bodies, which are directly responsible for its implementation, as well as non-governmental organizations, which seek to advocate interests of scientists; it studies rising competition between the executive authorities and legislators for the recognition as a major champion of the academic community as well as American Recovery and Reinvestment Act.

  18. United States Rotorcraft Technology Investment: Is There a Lack of a Vision

    National Research Council Canada - National Science Library

    Grotophorst, Jean A

    2008-01-01

    .... The teaming with AgustaWestland, a foreign company, served as a catalyst to question the type and amount of investments the United States was spending in new rotorcraft technologies or improvements...

  19. An Examination of the Determinants of Top Management Support of Information Technology Projects

    Science.gov (United States)

    Mahoney, Michael L.

    2011-01-01

    Despite compelling evidence that top management support promotes information technology project success, existing research fails to offer insight into the antecedents of top management support of such projects. This gap in the literature is significant since the exploitation of information technology offers organizations unique opportunities for…

  20. The behavioral outcomes of a technology-supported leisure activity in people with dementia

    NARCIS (Netherlands)

    J.E.W.C. Gemert-Pijnen; N. Nijhof; Joost van Hoof; H. van Rijn

    2013-01-01

    BACKGROUND: This paper presents the results of an evaluation of a technology-supported leisure game for people with dementia in relation to the stimulation of social behavior. OBJECTIVE: In this study we explore the additional impact of technology-supported leisure activities on behavioral outcomes

  1. A Meta-Analysis of Effectiveness Studies on Computer Technology-Supported Language Learning

    Science.gov (United States)

    Grgurovic, Maja; Chapelle, Carol A.; Shelley, Mack C.

    2013-01-01

    With the aim of summarizing years of research comparing pedagogies for second/foreign language teaching supported with computer technology and pedagogy not-supported by computer technology, a meta-analysis was conducted of empirical research investigating language outcomes. Thirty-seven studies yielding 52 effect sizes were included, following a…

  2. Socio-Pedagogical Complex as a Pedagogical Support Technology of Students' Social Adaptation

    Science.gov (United States)

    Sadovaya, Victoriya V.; Simonova, Galina I.

    2016-01-01

    The relevance of the problem stated in the article is determined by the need of developing technological approaches to pedagogical support of students' social adaptation. The purpose of this paper is to position the technological sequence of pedagogical support of students' social adaptation in the activities of the socio-pedagogical complex. The…

  3. A CONCEPT OF SOFTWARE SUPPORT OF LEARNING PROGRAMMING LANGUAGE AND TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    V. Kruglyk

    2013-03-01

    Full Text Available A concept of software support of learning programming language and technologies is regarded in the article. Present systems of independent study of subjects, related to programming, are examined. Necessary components of a system of support learning programming languages and technologies, which is oriented on independent study, are considered.

  4. Geospatial Technology Support in Small Academic Libraries: Time to Jump on Board?

    Science.gov (United States)

    Macfarlane, Carrie M.; Rodgers, Christopher M.

    2008-01-01

    Many librarians at small academic institutions have been wondering if they can, or even should, support the use of geospatial technology on their campuses. At the Middlebury College Libraries, we have developed a model of support for geospatial technology which we think might be versatile and transferable enough to try elsewhere.

  5. DJINNI: A novel technology supported exposure therapy paradigm for SAD combining virtual reality and augmented reality

    NARCIS (Netherlands)

    Ben-Moussa, M.; Rubo, M.; Debracque, C.; Lange, W.G.

    2017-01-01

    The present paper explores the benefits and the capabilities of various emerging state-of-the-art interactive 3D and Internet of Things (IoT) technologies and investigates how these technologies can be exploited to develop a more effective technology supported exposure therapy solution for Social

  6. Joint Coordinating Committee on environmental restoration and waste management (JCCEM) support, technology transfer, and special projects

    International Nuclear Information System (INIS)

    Edgar, D.E.

    1993-01-01

    Argonne National Laboratory (ANL) assisted in identifying and evaluating foreign technologies to meet EM needs; supported the evaluation, removal, and/or revision of barriers to international technology and information transfer/exchange; facilitated the integration and coordination of U.S. government international environmental restoration and waste management activities; and enhanced U.S. industry's competitiveness in the international environmental technology market

  7. How Undergraduate Students Use Social Media Technologies to Support Group Project Work

    Science.gov (United States)

    McAliney, Peter J.

    2013-01-01

    Technology continues to evolve and become accessible to students in higher education. Concurrently, teamwork has become an important skill in academia and the workplace and students have adopted established technologies to support their learning in both individual and team project work. Given the emergence of social media technologies, I examined…

  8. Technology Staff-Development and Support Programs: Applying Abraham Maslow's Hierarchy of Needs.

    Science.gov (United States)

    Bailey, Gerald D.; Pownell, David

    1998-01-01

    Presents Abraham Maslow's hierarchy of needs (physiological, safety, belonging, esteem, self-actualization) as a model for developing technology training and support for teachers, identifies basic technology-related needs that must be met before higher levels of technology integration can be achieved, and offers seven implications to help…

  9. integrated aerospace technologies in support of precision agriculture

    International Nuclear Information System (INIS)

    Borfecchia, Flavio; De Cecco, Luigi; Martini, Sandro

    2015-01-01

    In a scenario where agriculture plays a role increasingly important and strategic, dissemination, in this field, these space technologies and advanced robotic, more and more accessible, responds We need to base decisions on information integrated, not only to increase the production, but also to ensure quality food to the people World, minimizing environmental impacts and climate, and enhancing biodiversity. In this context, applications based on these technologies are proving increasingly central role in tackling the challenges of productivity increase in agriculture required by the global market, with a view Environmental sustainability also focused on diffusion of green economy and circular, in which refer some of the experimental applications and on April conducted in ENEA. [it

  10. Separations technology development to support accelerator-driven transmutation concepts

    International Nuclear Information System (INIS)

    Venneri, F.; Arthur, E.; Bowman, C.

    1996-01-01

    This is the final report of a one-year Laboratory-Directed Research and Development (LDRD) Project at the Los Alamos National Laboratory (LANL). This project investigated separations technology development needed for accelerator-driven transmutation technology (ADTT) concepts, particularly those associated with plutonium disposition (accelerator-based conversion, ABC) and high-level radioactive waste transmutation (accelerator transmutation of waste, ATW). Specific focus areas included separations needed for preparation of feeds to ABC and ATW systems, for example from spent reactor fuel sources, those required within an ABC/ATW system for material recycle and recovery of key long-lived radionuclides for further transmutation, and those required for reuse and cleanup of molten fluoride salts. The project also featured beginning experimental development in areas associated with a small molten-salt test loop and exploratory centrifugal separations systems

  11. Access, Use, and Preferences for Technology-Based Perinatal and Breastfeeding Support Among Childbearing Women.

    Science.gov (United States)

    Demirci, Jill Radtke; Cohen, Susan M; Parker, Maris; Holmes, Ashleigh; Bogen, Debra L

    2016-01-01

    We surveyed 146 postpartum women who birthed at 34-37 6/7 weeks of gestation and intended to breastfeed about their use of and preferences regarding technology to obtain perinatal and breastfeeding support. Most participants owned smartphones and used technology during pregnancy to track pregnancy data, follow fetal development, address pregnancy concerns, and obtain breastfeeding information. Internet, e-mail, apps, and multiplatform resources were the most popular technologies used and preferred. Demographic differences existed in mobile technology access and preferences for different technologies. In terms of technology-based breastfeeding support, women wanted encouragement, anticipatory guidance, and information about milk production. A nuanced understanding of the technology childbearing women use and desire has the potential to impact clinical care and inform perinatal support interventions.

  12. A Project in Support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Deok Ku; Kim, Kyoung Pyo; Ko, Young Chel (and others)

    2006-12-15

    Establish strategies of international cooperation in an effect to promote our nation's leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. Using the INIS output data, it has provided domestic users with searching. Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing.

  13. Remotely Piloted Innovation: Terrorism, Drones and Supportive Technology

    Science.gov (United States)

    2016-10-01

    own explosive-packed drone.” See “Attack of the Drones—the Dangers of Remote- Controlled Aircraft ,” Jane’s Intelligence Review, De- cember 16, 2011. 198...Cellphones,” Forbes, July 28, 2011. 299 “Attack of the Drones—the Dangers of Remote- Controlled Aircraft ,” Jane’s Intelligence Review, December 16, 2011...most significant technologies that will drive changes in drone capabilities include artificial intelligence ; autonomous systems and robotics

  14. Remediation planning and risk assessment support through data fusion technology

    International Nuclear Information System (INIS)

    1996-01-01

    Coleman Research's Data Fusion Modeling (DFM) services gives one the ability to use large geophysical and hydrological data sets, which include direct and indirect measurements, to obtain a unified mathematical model of the geology and hydrology at one's site. Coleman Research (CRC) has adapted highly stable and efficient statistical inversion techniques, developed over the past 20 years, to provide a 3D site model with quantified uncertainty based on state-of-the-art modeling codes. This site model supports risk assessment and remediation planning with enhanced numerical accuracy for tradeoff studies of alternate remediation strategies. Further, DFM supports real time model updates during remediation and site investigation

  15. Rationales for technology-specific RES support and their relevance for German policy

    International Nuclear Information System (INIS)

    Gawel, Erik; Lehmann, Paul; Purkus, Alexandra; Söderholm, Patrik; Witte, Katherina

    2017-01-01

    In order to achieve cost-effective RES-E deployment it is often argued that technology-neutral support schemes for renewables are indispensable. Against this background, RES-E support policies making widely use of technology differentiation in remuneration settings, e.g. across the EU, are frequently criticized from a theoretical point of view. However, in this paper we provide a systematic critique of the technology neutrality concept as a foundation for designing policy support schemes in the RES-E technology field. Specifically, the main objective of the paper is to scrutinize the arguments for technology-neutrality, and discuss three conceptual arguments for why technology-specific support schemes could in fact help minimize the societal costs of reaching future RES-E targets. We also briefly address different political economy concerns, which could constrain the choice of cost-effective policy support schemes, and that have to be taken into account for economic policy advice. For empirical illustration of the key arguments we refer to the case of German RES-E policy-making. The central conclusion from this paper is that technology-specific RES-E support schemes may generate significant economic benefits, particularly if technology markets work imperfectly and in second-best policy settings with additional non-internalized market failures. - Highlights: • Three theoretical cost-effectiveness reasons for technology-specific RES-E support. • German case study to show relevance of theoretical arguments for policy-making. • Political economy constraints to technology-neutral support are demonstrated. • Technology-specific RES-E support may generate significant economic benefits.

  16. Development of a Virtual Technology Coach to Support Technology Integration for K-12 Educators

    Science.gov (United States)

    Sugar, William; van Tryon, Patricia J. Slagter

    2014-01-01

    In an effort to develop a virtual technology coach for K-12 educators, this article analyzed survey results from sixty teachers with regards to specific resources that a technology coach could provide within a virtual environment. A virtual technology coach was proposed as a possible solution to provide continual professional development for…

  17. Independent Assessment of Technology Characterizations to Support the Biomass Program Annual State-of-Technology Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, B.

    2011-03-01

    This report discusses an investigation that addressed two thermochemical conversion pathways for the production of liquid fuels and addressed the steps to the process, the technology providers, a method for determining the state of technology and a tool to continuously assess the state of technology. This report summarizes the findings of the investigation as well as recommendations for improvements for future studies.

  18. Teaching Technological Knowledge: Determining and Supporting Student Learning of Technological Concepts

    Science.gov (United States)

    Compton, Vicki J.; Compton, Ange D.

    2013-01-01

    This paper reports on findings related to Technological Knowledge from Stage Two of the "Technological Knowledge and Nature of Technology: Implications for teaching and learning" ("TKNoT: Imps") research project undertaken in 2009. A key focus in Stage Two was the trialing of different teaching strategies to determine how…

  19. LITERATURE REVIEWS TO SUPPORT ION EXCHANGE TECHNOLOGY SELECTION FOR MODULAR SALT PROCESSING

    Energy Technology Data Exchange (ETDEWEB)

    King, W

    2007-11-30

    This report summarizes the results of literature reviews conducted to support the selection of a cesium removal technology for application in a small column ion exchange (SCIX) unit supported within a high level waste tank. SCIX is being considered as a technology for the treatment of radioactive salt solutions in order to accelerate closure of waste tanks at the Savannah River Site (SRS) as part of the Modular Salt Processing (MSP) technology development program. Two ion exchange materials, spherical Resorcinol-Formaldehyde (RF) and engineered Crystalline Silicotitanate (CST), are being considered for use within the SCIX unit. Both ion exchange materials have been studied extensively and are known to have high affinities for cesium ions in caustic tank waste supernates. RF is an elutable organic resin and CST is a non-elutable inorganic material. Waste treatment processes developed for the two technologies will differ with regard to solutions processed, secondary waste streams generated, optimum column size, and waste throughput. Pertinent references, anticipated processing sequences for utilization in waste treatment, gaps in the available data, and technical comparisons will be provided for the two ion exchange materials to assist in technology selection for SCIX. The engineered, granular form of CST (UOP IE-911) was the baseline ion exchange material used for the initial development and design of the SRS SCIX process (McCabe, 2005). To date, in-tank SCIX has not been implemented for treatment of radioactive waste solutions at SRS. Since initial development and consideration of SCIX for SRS waste treatment an alternative technology has been developed as part of the River Protection Project Waste Treatment Plant (RPP-WTP) Research and Technology program (Thorson, 2006). Spherical RF resin is the baseline media for cesium removal in the RPP-WTP, which was designed for the treatment of radioactive waste supernates and is currently under construction in Hanford, WA

  20. LITERATURE REVIEWS TO SUPPORT ION EXCHANGE TECHNOLOGY SELECTION FOR MODULAR SALT PROCESSING

    International Nuclear Information System (INIS)

    King, W.

    2007-01-01

    This report summarizes the results of literature reviews conducted to support the selection of a cesium removal technology for application in a small column ion exchange (SCIX) unit supported within a high level waste tank. SCIX is being considered as a technology for the treatment of radioactive salt solutions in order to accelerate closure of waste tanks at the Savannah River Site (SRS) as part of the Modular Salt Processing (MSP) technology development program. Two ion exchange materials, spherical Resorcinol-Formaldehyde (RF) and engineered Crystalline Silicotitanate (CST), are being considered for use within the SCIX unit. Both ion exchange materials have been studied extensively and are known to have high affinities for cesium ions in caustic tank waste supernates. RF is an elutable organic resin and CST is a non-elutable inorganic material. Waste treatment processes developed for the two technologies will differ with regard to solutions processed, secondary waste streams generated, optimum column size, and waste throughput. Pertinent references, anticipated processing sequences for utilization in waste treatment, gaps in the available data, and technical comparisons will be provided for the two ion exchange materials to assist in technology selection for SCIX. The engineered, granular form of CST (UOP IE-911) was the baseline ion exchange material used for the initial development and design of the SRS SCIX process (McCabe, 2005). To date, in-tank SCIX has not been implemented for treatment of radioactive waste solutions at SRS. Since initial development and consideration of SCIX for SRS waste treatment an alternative technology has been developed as part of the River Protection Project Waste Treatment Plant (RPP-WTP) Research and Technology program (Thorson, 2006). Spherical RF resin is the baseline media for cesium removal in the RPP-WTP, which was designed for the treatment of radioactive waste supernates and is currently under construction in Hanford, WA

  1. Agent Technology supports Inter-Organizational Planning in the Port

    NARCIS (Netherlands)

    J.M. Moonen (Hans); B. van de Rakt (Bastiaan); I. Miller; J.A.E.E. van Nunen (Jo); J. van Hillegersberg (Jos)

    2005-01-01

    textabstractThe Port of Rotterdam is a key container transshipment hub for Europe. Inland container shipping is important to connect the hinterland (40% market share). Barges visit several terminals per round-trip through the Port, thus requiring a proper planning support – to avoid planning

  2. Corpus-Supported Academic Writing: How Can Technology Help?

    Science.gov (United States)

    Chitez, Madalina; Rapp, Christian; Kruse, Otto

    2015-01-01

    Phraseology has long been used in L2 teaching of academic writing, and corpus linguistics has played a major role in the compilation and assessment of academic phrases. However, there are only a few interactive academic writing tools in which corpus methodology is implemented in a real-time design to support formulation processes. In this paper,…

  3. Supporting Content and Language Integrated Learning through Technology

    Science.gov (United States)

    Gimeno-Sanz, Ana; Ó Dónaill, Caoimhín; Andersen, Kent

    2014-01-01

    This paper describes Clilstore and how this tool can support Content and Language Integrated Learning (CLIL), which involves teaching a curricular subject through the medium of a foreign language, as was evidenced through data collected from two surveys conducted with secondary school teachers from various European countries. [For full…

  4. The Mixed Waste Management Facility: Technology selection and implementation plan, Part 2, Support processes

    International Nuclear Information System (INIS)

    Streit, R.D.; Couture, S.A.

    1995-03-01

    The purpose of this document is to establish the foundation for the selection and implementation of technologies to be demonstrated in the Mixed Waste Management Facility, and to select the technologies for initial pilot-scale demonstration. Criteria are defined for judging demonstration technologies, and the framework for future technology selection is established. On the basis of these criteria, an initial suite of technologies was chosen, and the demonstration implementation scheme was developed. Part 1, previously released, addresses the selection of the primary processes. Part II addresses process support systems that are considered ''demonstration technologies.'' Other support technologies, e.g., facility off-gas, receiving and shipping, and water treatment, while part of the integrated demonstration, use best available commercial equipment and are not selected against the demonstration technology criteria

  5. Technical and analytical support to the ARPA Artificial Neural Network Technology Program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-16

    Strategic Analysis (SA) has provided ongoing work for the Advanced Research Projects Agency (ARPA) Artificial Neural Network (ANN) technology program. This effort provides technical and analytical support to the ARPA ANN technology program in support of the following information areas of interest: (1) Alternative approaches for application of ANN technology, hardware approaches that utilize the inherent massive parallelism of ANN technology, and novel ANN theory and modeling analyses. (2) Promising military applications for ANN technology. (3) Measures to use in judging success of ANN technology research and development. (4) Alternative strategies for ARPA involvement in ANN technology R&D. These objectives were accomplished through the development of novel information management tools, strong SA knowledge base, and effective communication with contractors, agents, and other program participants. These goals have been realized. Through enhanced tracking and coordination of research, the ANN program is healthy and recharged for future technological breakthroughs.

  6. Point-of-care technology supports bedside documentation.

    Science.gov (United States)

    Carlson, Elizabeth; Catrambone, Cathy; Oder, Karl; Nauseda, Susan; Fogg, Lou; Garcia, Brian; Brown, Frederick M; Johnson, Mary E; Johnson, Tricia J; Llewellyn, Jane

    2010-09-01

    As the conversion to an electronic health record intensifies, the question of which data-entry device works best in what environment and situation is paramount. Specifically, what is the best mix of equipment to purchase and install on clinical units based on staff preferences and budget constraints? The authors discuss their evaluation of stationary personal computers, workshops on wheels, and handheld tablets related to timeliness of data entry and their use of focus groups to ascertain the pros/cons of data-entry devices and staff preferences. An assessment of the implications for costs related to the timeliness of data entry is also presented.

  7. The Supply and Demand of Technology and Engineering Teachers in the United States: Who Knows?

    Science.gov (United States)

    Moye, Johnny J.

    2017-01-01

    The purpose of this study was to determine the supply and demand of technology and engineering teachers in the United States. Once gathered, the resulting data (that was available) was compared to previous studies to determine trends. The researcher reviewed the 2010-11 through 2015-16 Technology & Engineering Teacher Education Directories. To…

  8. Designing a Deeply Digital Science Curriculum: Supporting Teacher Learning and Implementation with Organizing Technologies

    Science.gov (United States)

    Leary, Heather; Severance, Samuel; Penuel, William R.; Quigley, David; Sumner, Tamara; Devaul, Holly

    2016-01-01

    This paper examines the impacts of technology (e.g., Chromebooks, Google Drive) on teacher learning and student activity in the development and implementation of a deeply digital high school biology unit. Using design-based implementation research, teachers co-designed with researchers and curriculum specialists a student-centered unit aligned to…

  9. Using Technology to Support the Army Learning Model

    Science.gov (United States)

    2016-02-01

    more graphic scenes which provided the most impact on the student . The in-house team was successful in coming up with innovative and creative ...for instructors to monitor the students ’ use of the product during classroom time in order to provide feedback and support. The training the...a sense, benefits to the students relied on the creativity of the instructor. For example, some instructors used the products to preview or review

  10. Support system for loop device operator. Analysis of technological processes

    International Nuclear Information System (INIS)

    Yakovlev, V.V.; Mozhaev, A.A.; Lyadin, A.V.

    1988-01-01

    The paper presents the results obtained from the analysis of controlling the loops of a research reactor. A method of optimized interaction of the operator and hardware of the control system by computeraided identification of the cause of regime violation is considered. The equipment diagnostics based on use of the expert system methods and tuzzy algorithms enables to propose a support system for application in new generation of loops

  11. Remotely Piloted Innovation: Terrorism, Drones and Supportive Technology

    Science.gov (United States)

    2016-10-01

    to fly in most areas that would represent attractive targets appear to be significant advantages . However, they have significant disadvantages in...uninhabited aircraft sys- tems,” or UASs), but little empirical and historical work has been done to support our understanding of this phenomenon and its...imagination, lies within the realm of immediate terrorist possibility. This study examines the evolution of terrorists’ interest in and use of drones, and

  12. Supporting an Object-Oriented Approach to Unit Generator Development: The Csound Plugin Opcode Framework

    Directory of Open Access Journals (Sweden)

    Victor Lazzarini

    2017-09-01

    Full Text Available This article presents a new framework for unit generator development for Csound, supporting a full object-oriented programming approach. It introduces the concept of unit generators and opcodes, and its centrality with regards to music programming languages in general, and Csound in specific. The layout of an opcode from the perspective of the Csound C-language API is presented, with some outline code examples. This is followed by a discussion which places the unit generator within the object-oriented paradigm and the motivation for a full C++ programming support, which is provided by the Csound Plugin Opcode Framework (CPOF. The design of CPOF is then explored in detail, supported by several opcode examples. The article concludes by discussing two key applications of object-orientation and their respective instances in the Csound code base.

  13. The effect of child support enforcement on abortion in the United States.

    Science.gov (United States)

    Crowley, Jocelyn E; Jagannathan, Radha; Falchettore, Galo

    2012-01-01

    This project aims to answer a critically important question of public policy: Does effective child support enforcement lead to a change in the incidence of abortion across the United States? Using state-level data collected from 1978–2003 from a variety of sources, we employ fixed effects regression analysis to examine whether financial security as measured by five types of child support enforcement effectiveness impacts abortion outcomes. We find that child support enforcement effectiveness decreases the incidence of abortion as measured by the abortion rate, but not the abortion ratio. Income transfer policies such as child support enforcement can affect certain fertility outcomes such as abortion rates across the states.

  14. International technology catalogue: Foreign technologies to support the environmental restoration and waste management needs of the DOE complex

    International Nuclear Information System (INIS)

    Matalucci, R.V.

    1995-07-01

    This document represents a summary of 27 foreign-based environmental restoration and waste management technologies that have been screened and technically evaluated for application to the cleanup problems of the Department of Energy (DOE) nuclear weapons complex. The evaluation of these technologies was initiated in 1992 and completed in 1995 under the DOE's International Technology Coordination Program of the Office of Technology Development. A methodology was developed for conducting a country-by-country survey of several regions of the world where specific environmental technology capabilities and market potential were investigated. The countries that were selected from a rank-ordering process for the survey included: then West Germany, the Netherlands, France, Japan, Taiwan, the Czech and Slovak Republics, and the Former Soviet Union. The notably innovative foreign technologies included in this document were screened initially from a list of several hundred, and then evaluated based on criteria that examined for level of maturity, suitability to the DOE needs, and for potential cost effective application at a DOE site. Each of the selected foreign technologies that were evaluated in this effort for DOE application were subsequently matched with site-specific environmental problem units across the DOE complex using the Technology Needs Assessment CROSSWALK Report. For ease of tracking these technologies to site problem units, and to facilitate their input into the DOE EnviroTRADE Information System, they were categorized into the following three areas: (1) characterization, monitoring and sensors, (2) waste treatment and separations, and (3) waste containment. Technical data profiles regarding these technologies include title and description, performance information, development status, key regulatory considerations, intellectual property rights, institute and contact personnel, and references

  15. International technology catalogue: Foreign technologies to support the environmental restoration and waste management needs of the DOE complex

    Energy Technology Data Exchange (ETDEWEB)

    Matalucci, R.V. [ed.] [Sandia National Labs., Albuquerque, NM (United States). International Programs Dept.; Jimenez, R.D.; Esparza-Baca, C. [ed.] [Applied Sciences Lab., Inc., Albuquerque, NM (United States)

    1995-07-01

    This document represents a summary of 27 foreign-based environmental restoration and waste management technologies that have been screened and technically evaluated for application to the cleanup problems of the Department of Energy (DOE) nuclear weapons complex. The evaluation of these technologies was initiated in 1992 and completed in 1995 under the DOE`s International Technology Coordination Program of the Office of Technology Development. A methodology was developed for conducting a country-by-country survey of several regions of the world where specific environmental technology capabilities and market potential were investigated. The countries that were selected from a rank-ordering process for the survey included: then West Germany, the Netherlands, France, Japan, Taiwan, the Czech and Slovak Republics, and the Former Soviet Union. The notably innovative foreign technologies included in this document were screened initially from a list of several hundred, and then evaluated based on criteria that examined for level of maturity, suitability to the DOE needs, and for potential cost effective application at a DOE site. Each of the selected foreign technologies that were evaluated in this effort for DOE application were subsequently matched with site-specific environmental problem units across the DOE complex using the Technology Needs Assessment CROSSWALK Report. For ease of tracking these technologies to site problem units, and to facilitate their input into the DOE EnviroTRADE Information System, they were categorized into the following three areas: (1) characterization, monitoring and sensors, (2) waste treatment and separations, and (3) waste containment. Technical data profiles regarding these technologies include title and description, performance information, development status, key regulatory considerations, intellectual property rights, institute and contact personnel, and references.

  16. Recent Weather Technologies Delivered to America's Space Program by the Applied Meteorology Unit

    Science.gov (United States)

    Bauman, WIlliam, H., III; Crawford, Winifred

    2009-01-01

    The Applied Meteorology Unit (AMU) is a unique joint venture of NASA, the Air Force and the National Weather Service (NWS) and has been supporting the Space Program for nearly two decades. The AMU acts as a bridge between the meteorological research community and operational forecasters by developing, evaluating and transitioning new technology and techniques to improve weather support to spaceport operations at the Eastern Range (ER) and Kennedy Space Center. Its primary customers are the 45th Weather Squadron at Cape Canaveral Air Force Station (CCAFS), the Spaceflight Meteorology Group at Johnson Space Center and the National Weather Service Office in Melbourne, FL. Its products are used to support NASA's Shuttle and ELV programs as well as Department of Defense and commercial launches from the ER. Shuttle support includes landing sites beyond the ER. The AMU is co-located with the Air Force operational forecasters at CCAFS to facilitate continuous two-way interaction between the AMU and its operational customers. It is operated under a NASA, Air Force, and NWS Memorandum of Understanding (MOU) by a competitively-selected contractor. The contract, which is funded and managed by NASA, provides five full time professionals with degrees in meteorology or related fields, some of whom also have operational experience. NASA provides a Ph.D.- level NASA civil service scientist as Chief of the AMU. The AMU is tasked by its customers through a unique, nationally recognized process. The tasks are limited to development, evaluation and operational transition of technology to improve weather support to spaceport operations and providing expert advice to the customers. The MOU expressly forbids using the AMU resources to conduct operations or do basic research. The presentation will provide a brief overview of the AMU and how it is tasked by its customers to provide high priority products and services. The balance of the presentation will cover a sampling of products

  17. Low-level radioactive waste disposal technologies used outside the United States

    International Nuclear Information System (INIS)

    Templeton, K.J.; Mitchell, S.J.; Molton, P.M.; Leigh, I.W.

    1994-01-01

    Low-level radioactive waste (LLW) disposal technologies are an integral part of the waste management process. In the United States, commercial LLW disposal is the responsibility of the State or groups of States (compact regions). The United States defines LLW as all radioactive waste that is not classified as spent nuclear fuel, high- level radioactive waste, transuranic waste, or by-product material as defined in Section II(e)(2) of the Atomic Energy Act. LLW may contain some long-lived components in very low concentrations. Countries outside the United States, however, may define LLW differently and may use different disposal technologies. This paper outlines the LLW disposal technologies that are planned or being used in Canada, China, Finland, France, Germany, Japan, Sweden, Taiwan, and the United Kingdom (UK)

  18. Assessment of Wearable Technology for Integrated Decision Support

    Science.gov (United States)

    2016-05-01

    Research Labs   APP      mobile  application   ARL     Army Research Laboratory   ATD     advanced technology demonstration   CBDP     Chemical and Biological...information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services , Directorate for Information...Research Laboratory  (AFRL) has  shown a large  variance  in accuracy of many commercial devices.  As many of these devices will  likely  contain  more

  19. Fission Fragment Yield Data in Support of Advanced Reactor Technology

    Energy Technology Data Exchange (ETDEWEB)

    Hecht, Adam [Univ. of New Mexico, Albuquerque, NM (United States)

    2017-11-21

    Within the 3 year POP we propose to continue to test and further develop the fission spectrometers, to do development tests and full data acquisition run at the national laboratory neutron beam facilities, to measure correlated fission fragment yields at low neutron energies with 235 U fission targets, and make these data available to the nuclear community. The spectrometer development will be both on the university based r\\prototype and on the National Laboratory Spectrometer, and measurements will be performed with both. Over the longer time frame of the collaboration, we will take data over a range of low energies, and use other fission targets available to the laboratory. We will gather energy specific fragment distributions and reaction cross sections. We will further develop the data acquisition capabilities to take correlated fission fragment'gamma ray/neurton data, all on an event-by-event basis. This really is an enabling technology.

  20. Health technology management: a database analysis as support of technology managers in hospitals.

    Science.gov (United States)

    Miniati, Roberto; Dori, Fabrizio; Iadanza, Ernesto; Fregonara, Mario M; Gentili, Guido Biffi

    2011-01-01

    Technology management in healthcare must continually respond and adapt itself to new improvements in medical equipment. Multidisciplinary approaches which consider the interaction of different technologies, their use and user skills, are necessary in order to improve safety and quality. An easy and sustainable methodology is vital to Clinical Engineering (CE) services in healthcare organizations in order to define criteria regarding technology acquisition and replacement. This article underlines the critical aspects of technology management in hospitals by providing appropriate indicators for benchmarking CE services exclusively referring to the maintenance database from the CE department at the Careggi Hospital in Florence, Italy.

  1. The Role of Online Social Support in Supporting and Educating Parents of Young Children With Special Health Care Needs in the United States: A Scoping Review

    Science.gov (United States)

    Staten, Lisa K; Rodgers, Rylin Christine; Denne, Scott C

    2016-01-01

    Background When parents of young children with special health care needs (CSHCN) receive their child’s diagnosis, they encounter information they may not understand, emotions they may not know how to cope with, and questions about their child’s immediate and long-term future that frequently lack answers. The challenge of health care providers is how to prepare parents for caring for their CSHCN, for coping with any resulting challenges, and for accessing the systems and services that can assist them. Objective The purpose of this work was to review evidence of the information and support needs of parents of young CSHCN and to determine whether online social support can serve as an avenue for learning and empowerment for these parents. Methods A scoping review identified the challenges, coping mechanisms, and support needs among parents of CSHCN, and the reach and effectiveness of digital technologies with these families and health care providers. We also conducted interviews with professionals serving parents of CSHCN. Results The literature review and interviews suggested that parents best learn the information they need, and cope with the emotional challenges of raising a CSHCN, with support from other parents of CSHCN, and that young parents in recent years have most often been finding this parent-to-parent support through digital media, particularly social media, consistent with the theory of online social support. Evidence also shows that social media, particularly Facebook, is used by nearly all women aged 18-29 years across racial and socioeconomic lines in the United States. Conclusions Parents of young CSHCN experience significant stress but gain understanding, receive support, and develop the ability to care for and be advocates for their child through parent-to-parent emotional and informational social support. Online social support is most effective with young adults of childbearing age, with social media and apps being the most useful within the

  2. The Role of Online Social Support in Supporting and Educating Parents of Young Children With Special Health Care Needs in the United States: A Scoping Review.

    Science.gov (United States)

    DeHoff, Beth A; Staten, Lisa K; Rodgers, Rylin Christine; Denne, Scott C

    2016-12-22

    When parents of young children with special health care needs (CSHCN) receive their child's diagnosis, they encounter information they may not understand, emotions they may not know how to cope with, and questions about their child's immediate and long-term future that frequently lack answers. The challenge of health care providers is how to prepare parents for caring for their CSHCN, for coping with any resulting challenges, and for accessing the systems and services that can assist them. The purpose of this work was to review evidence of the information and support needs of parents of young CSHCN and to determine whether online social support can serve as an avenue for learning and empowerment for these parents. A scoping review identified the challenges, coping mechanisms, and support needs among parents of CSHCN, and the reach and effectiveness of digital technologies with these families and health care providers. We also conducted interviews with professionals serving parents of CSHCN. The literature review and interviews suggested that parents best learn the information they need, and cope with the emotional challenges of raising a CSHCN, with support from other parents of CSHCN, and that young parents in recent years have most often been finding this parent-to-parent support through digital media, particularly social media, consistent with the theory of online social support. Evidence also shows that social media, particularly Facebook, is used by nearly all women aged 18-29 years across racial and socioeconomic lines in the United States. Parents of young CSHCN experience significant stress but gain understanding, receive support, and develop the ability to care for and be advocates for their child through parent-to-parent emotional and informational social support. Online social support is most effective with young adults of childbearing age, with social media and apps being the most useful within the theoretical framework of social support. This opens new

  3. A framework for synthesizing the United States Code in support of cyberspace operations

    OpenAIRE

    Stonehouse, Joshua C.

    2016-01-01

    Approved for public release; distribution is unlimited In recent years, federal agencies and organizations have witnessed their jurisdictions converge in a number of areas that support U.S. national security. For operations that rely heavily upon information technology, the complexity associated with clarifying statutory authority has been met with inconsistent responses. Attempts to comprehend the technological implications of these operations has been accompanied by a shift in seeing the...

  4. Study on fault diagnosis technology based on support vector machine

    International Nuclear Information System (INIS)

    Xia Hong; Zhang Nan; Du Xingfu

    2010-01-01

    In this paper, two fault diagnostic casts were constructed using SVM theory for model fault such as cracks of steam generator heat transfer tubes and small break loss of coolant accident in nuclear power plant. One fault diagnostic cast was constructed based on least squares support vector machines using C++ programming language. The other was constructed based on traditionary support vector machines using Matlab7.0 program. The results in the Simulation Test have shown that the performance of the two models based on two kinds of SVMs both depends on the choice of nuclear function model and the parameters. In this study, after the suitable choice, the same diagnostic performance was obtained using two kinds of SVMs. The fault can be diagnosed exactly during the period between the third second until shutdown. In the first three seconds, the fault data were not yet shown or the data were fluctuant. The simulation results demonstrated that the methods could diagnose the fault phenomenon accurately under the circumstances of small example sizes, and the precision was very high. (authors)

  5. Information Technology Support For Debiasing Group Judgments: An Empirical Evaluation.

    Science.gov (United States)

    Benbasat; Lim

    2000-09-01

    Human judgments, made by either individuals or groups, have been found to contain biases. One of the most prevalent biases identified is the availability bias, associated with the phenomenon that events which are more available to human memory are correspondingly judged as occurring more frequently or as being more important. This paper is concerned with how to reduce the availability bias in the group context. It reports an experiment in which two computer-based support facilities, electronic brainstorming and electronic mail, were tested for their contributions to reducing the availability bias. A 2 x 2 experimental design was used: electronic brainstorming (available or not) and communication mode (electronic or verbal). Forty teams of three members each were asked to work on a task involving the rating of the importance of a number of items associated with a secretary's task. Both electronic brainstorming and electronic communication helped reduce the availability bias. In both cases, the reduction in bias was due to increased attention paid to items that were found to have low availability in the absence of these support tools. Copyright 2000 Academic Press.

  6. Intravenous Administration Errors Intercepted by Smart Infusion Technology in an Adult Intensive Care Unit.

    Science.gov (United States)

    Ibarra-Pérez, Rebecca; Puértolas-Balint, Fabiola; Lozano-Cruz, Elizabeth; Zamora-Gómez, Sergio E; Castro-Pastrana, Lucila I

    2017-04-01

    The aim of the study was to investigate the efficacy of intravenous (IV) smart pumps with drug libraries and dose error reduction system (DERS) to intercept programming errors entailing high risk for patients in an adult intensive care unit (ICU). A 2-year retrospective study was conducted in the adult ICU of the Hospital Juárez de México in Mexico City to evaluate the impact of IV smart pump/DERS (Hospira MedNet) technology implementation. We conducted a descriptive analysis of the reports generated by the system's software from April 2014 through May 2016. Our study focused on the upper hard limit alerts and used the systems' variance reports and IV Medication Harm Index methodology to determine the severity of the averted overdoses for medications with the highest number of edits. The system monitored 124,229 infusion programs and averted on 36,942 deviations of the preset safe limits. Upper hard limit alerts accounted for 26.4% of pump reprogramming events. One hundred sixty-six significant administration errors were intercepted and prevented, and IV Medication Harm Index analysis identified 83 of them as highest-risk averted overdoses with insulin accounting for 51.8% of those. The rate of compliance with the safety software during the study period was 69.8%. Our study contributes additional evidence of the impact of IV smart pump/DERS technology. These pumps effectively intercepted severe infusion errors and significantly prevented adverse drug events related to dosing. Our results support the implementation of this technology in ICUs as a minimum safety standard and could help drive an IV infusion safety initiative in Mexico.

  7. Report to the United States Congress clean coal technology export markets and financing mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    This report responds to a Congressional Conference Report that requests that $625,000 in funding provided will be used by the Department to identify potential markets for clean coal technologies in developing countries and countries with economies in transition from nonmarket economies and to identify existing, or new, financial mechanisms or financial support to be provided by the Federal government that will enhance the ability of US industry to participate in these markets. The Energy Information Administration (EIA) expects world coal consumption to increase by 30 percent between 1990 and 2010, from 5.1 to 6.5 billion short tons. Five regions stand out as major foreign markets for the export of US clean coal technologies: China; The Pacific Rim (other than China); South Asia (primarily India); Transitional Economies (Central Europe and the Newly Independent States); and Other Markets (the Americas and Southern Africa). Nearly two-thirds of the expected worldwide growth in coal utilization will occur in China, one quarter in the United States. EIA forecasts nearly a billion tons per year of additional coal consumption in China between 1990 and 2010, a virtual doubling of that country`s coal consumption. A 30-percent increase in coal consumption is projected in other developing countries over that same period. This increase in coal consumption will be accompanied by an increase in demand for technologies for burning coal cost-effectively, efficiently and cleanly. In the Pacific Rim and South Asia, rapid economic growth coupled with substantial indigenous coal supplies combine to create a large potential market for CCTS. In Central Europe and the Newly Independent States, the challenge will be to correct the damage of decades of environmental neglect without adding to already-considerable economic disruption. Though the situation varies, all these countries share the basic need to use indigenous low-quality coal cleanly and efficiently.

  8. Report to the United States Congress clean coal technology export markets and financing mechanisms

    International Nuclear Information System (INIS)

    1994-05-01

    This report responds to a Congressional Conference Report that requests that $625,000 in funding provided will be used by the Department to identify potential markets for clean coal technologies in developing countries and countries with economies in transition from nonmarket economies and to identify existing, or new, financial mechanisms or financial support to be provided by the Federal government that will enhance the ability of US industry to participate in these markets. The Energy Information Administration (EIA) expects world coal consumption to increase by 30 percent between 1990 and 2010, from 5.1 to 6.5 billion short tons. Five regions stand out as major foreign markets for the export of US clean coal technologies: China; The Pacific Rim (other than China); South Asia (primarily India); Transitional Economies (Central Europe and the Newly Independent States); and Other Markets (the Americas and Southern Africa). Nearly two-thirds of the expected worldwide growth in coal utilization will occur in China, one quarter in the United States. EIA forecasts nearly a billion tons per year of additional coal consumption in China between 1990 and 2010, a virtual doubling of that country's coal consumption. A 30-percent increase in coal consumption is projected in other developing countries over that same period. This increase in coal consumption will be accompanied by an increase in demand for technologies for burning coal cost-effectively, efficiently and cleanly. In the Pacific Rim and South Asia, rapid economic growth coupled with substantial indigenous coal supplies combine to create a large potential market for CCTS. In Central Europe and the Newly Independent States, the challenge will be to correct the damage of decades of environmental neglect without adding to already-considerable economic disruption. Though the situation varies, all these countries share the basic need to use indigenous low-quality coal cleanly and efficiently

  9. A Computer Oriented Problem Solving Unit, Consume. Student Guide. Computer Technology Program Environmental Education Units.

    Science.gov (United States)

    Northwest Regional Educational Lab., Portland, OR.

    This is the student guide in a set of five computer-oriented environmental/energy education units. Contents are organized into the following parts or lessons: (1) introduction to power and energy; (2) energy consumption and supply; (3) energy conservation and distribution; (4) energy flow and the question of transportation; and (5) computer models…

  10. Multimedia Superabrasive, Laser Cladding, and Waterjet Technology Performance Support System

    International Nuclear Information System (INIS)

    Bohley, M.C.; Ciccateri, T.J.

    1998-01-01

    The objective of this project was to create a system that delivered the appropriate information to the machine tool user just when needed and in the most appropriate form. The expertise of FM and T in the areas of instructional system design and multimedia creation was employed. Huffman brought together their subject matter experts from engineering, manufacturing, technical writing, and technical support. AlliedSignal FM and T worked together with Huffman as a design team to determine what tasks must be accomplished throughout the machine tool production phases, who performs those tasks, what skills are utilized, and what information is required to support the tasks. This project resulted in the identification of information flow throughout the life cycle of the machine tool products. Specialized tools required for assembly and calibration procedures were identified and their images captured, digitized, and stored for easy retrieval within the PSS. Subject matter experts were interviewed to determine which tasks require highly specialized knowledge and skills. These tasks were then performed on actual machines and the technicians' actions captured on video tape. The resulting video segments were edited, digitized, and integrated into the information system portion of the PSS where they are available for viewing alongside procedural information presented on the computer display screen of the machine tool controller. Information from Troubleshooting experts were interviewed regarding the symptoms and root causes of system malfunctions. This knowledge was captured and fault trees were developed. These trees were then incorporated into an expert system as a rule base. The troubleshooting portion of the PSS presents simple questions to the machine operator in order to determine the likely cause of malfunctions and then recommended corrective actions. Newly created and existing reference information was both created and re-purposed from other existing formats, then

  11. Interaction and Technological Resources to Support Learning of Complex Numbers

    Directory of Open Access Journals (Sweden)

    Cassiano Scott Puhl

    2016-02-01

    Full Text Available This article presents a didactic proposal, a workshop for the introduction of the study of complex numbers. Unlike recurrent practices, the workshop began developing the geometric shape of the complex number, implicitly, through vectors. Eliminating student formal vision and algebraic, enriching the teaching practice. The main objective of the strategy was to build the concept of imaginary unit without causing a feeling of strangeness or insignificance of number. The theory of David Ausubel, meaningful learning, the workshop was based on a strategy developed to analyze the subsumers of students and develop a learning by subject. Combined with dynamic and interactive activities in the workshop, there is the use of a learning object (http://matematicacomplexa.meximas.com/. An environment created and basing on the theory of meaningful learning, making students reflect and interact in developed applications sometimes being challenged and other testing hypotheses and, above all, building knowledge. This proposal provided a rich environment for exchange of information between participants and deepening of ideas and concepts that served as subsumers. The result of the experience was very positive, as evidenced by the comments and data submitted by the participants, thus demonstrating that the objectives of this didactic proposal have been achieved.

  12. Formation of a New Entity to Support Effective Use of Technology in Medical Education: The Student Technology Committee.

    Science.gov (United States)

    Shenson, Jared Andrew; Adams, Ryan Christopher; Ahmed, S Toufeeq; Spickard, Anderson

    2015-09-17

    As technology in medical education expands from teaching tool to crucial component of curricular programming, new demands arise to innovate and optimize educational technology. While the expectations of today's digital native students are significant, their experience and unique insights breed new opportunities to involve them as stakeholders in tackling educational technology challenges. The objective of this paper is to present our experience with a novel medical student-led and faculty-supported technology committee that was developed at Vanderbilt University School of Medicine to harness students' valuable input in a comprehensive fashion. Key lessons learned through the initial successes and challenges of implementing our model are also discussed. A committee was established with cooperation of school administration, a faculty advisor with experience launching educational technologies, and a group of students passionate about this domain. Committee membership is sustained through annual selective recruitment of interested students. The committee serves 4 key functions: acting as liaisons between students and administration; advising development of institutional educational technologies; developing, piloting, and assessing new student-led educational technologies; and promoting biomedical and educational informatics within the school community. Participating students develop personally and professionally, contribute to program implementation, and extend the field's understanding by pursuing research initiatives. The institution benefits from rapid improvements to educational technologies that meet students' needs and enhance learning opportunities. Students and the institution also gain from fostering a campus culture of awareness and innovation in informatics and medical education. The committee's success hinges on member composition, school leadership buy-in, active involvement in institutional activities, and support for committee initiatives. Students

  13. Capabilities to Support Thermochemical Hydrogen Production Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Daniel M. Ginosar

    2009-05-01

    This report presents the results of a study to determine if Idaho National Laboratory (INL) has the skilled staff, instrumentation, specialized equipment, and facilities required to take on work in thermochemical research, development, and demonstration currently being performed by the Nuclear Hydrogen Initiative (NHI). This study outlines the beneficial collaborations between INL and other national laboratories, universities, and industries to strengthen INL's thermochemical efforts, which should be developed to achieve the goals of the NHI in the most expeditious, cost effective manner. Taking on this work supports INL's long-term strategy to maintain leadership in thermochemical cycle development. This report suggests a logical path forward to accomplish this transition.

  14. Unpacking altmetrics: how new technologies can support engagement and outreach

    Science.gov (United States)

    Liu, Jean

    2017-04-01

    Today's researchers face many challenges; determining which content is most relevant to read, choosing where to publish their work, ensuring it's reaching the right people, attracting funding and finding new collaborators, to name just a few. In this session we'll examine how new metrics and technologies can help with each of these activities. With an overview of the online attention and engagement surrounding specific journals in relevant fields, we'll discuss how researchers can best make use of these data. This will include a focus on some specific real-world case studies, where scholars in a variety of disciplines and at different stages of their careers have used these data to build more effective strategies and benefit from their outcomes. We'll also hear from a publisher on how they are using the metrics as part of their drive to make research published in their journals more visible, and how they are working with academic editors and authors to refine scope and build engagement with specific communities of interest. The presentation will conclude with some tips for how researchers can use free tools and the insights already provided by many publishers to start incorporating the data into their existing workflows.

  15. Autonomous, agile micro-satellites and supporting technologies

    International Nuclear Information System (INIS)

    Breitfeller, E; Dittman, M D; Gaughan, R J; Jones, M S; Kordas, J F; Ledebuhr, A G; Ng, L C; Whitehead, J C; Wilson, B

    1999-01-01

    This paper updates the on-going effort at Lawrence Livermore National Laboratory to develop autonomous, agile micro-satellites (MicroSats). The objective of this development effort is to develop MicroSats weighing only a few tens of kilograms, that are able to autonomously perform precision maneuvers and can be used telerobotically in a variety of mission modes. The required capabilities include satellite rendezvous, inspection, proximity-operations, docking, and servicing. The MicroSat carries an integrated proximity-operations sensor-suite incorporating advanced avionics. A new self-pressurizing propulsion system utilizing a miniaturized pump and non-toxic mono-propellant hydrogen peroxide was successfully tested. This system can provide a nominal 25 kg MicroSat with 200-300 m/s delta-v including a warm-gas attitude control system. The avionics is based on the latest PowerPC processor using a CompactPCI bus architecture, which is modular, high-performance and processor-independent. This leverages commercial-off-the-shelf (COTS) technologies and minimizes the effects of future changes in processors. The MicroSat software development environment uses the Vx-Works real-time operating system (RTOS) that provides a rapid development environment for integration of new software modules, allowing early integration and test. We will summarize results of recent integrated ground flight testing of our latest non-toxic pumped propulsion MicroSat testbed vehicle operated on our unique dynamic air-rail

  16. The support of meat value chains by genetic technologies.

    Science.gov (United States)

    Sosnicki, Andrzej A; Newman, Scott

    2010-09-01

    Ongoing meat and food industry consolidation has resulted in the creation of larger and more complex, vertically integrated and/or coordinated food production systems. These systems have also been focused on development of differentiated 'Value Chains' as a departure from the traditional commodity oriented 'Supply Chains'. The main goal of value chains is to achieve sustainable competitiveness through focusing resources on efficiently producing goods that offer superior consumer-recognized value. A closely-aligned value chain often contains vertically and horizontally linked players such as genetics and genetic improvement program(s), farmer(s), processor(s), distributor(s), and retailer(s). In this paper we postulate that the underlying foundation of the success of meat value chain accomplishments has been through substantial development of animal genetic technologies enabling sustainable production of animal protein-based consumer products of desirable quantity and quality. It is plausible to assume that further advancement in genomic selection and eventually proteomics will enable implementation of more complex genetic improvement programs leading to further development of differentiated meat value chains focused on ever changing consumer needs.

  17. Limitation to Advanced Life Support in patients admitted to intensive care unit with integrated palliative care

    Science.gov (United States)

    Mazutti, Sandra Regina Gonzaga; Nascimento, Andréia de Fátima; Fumis, Renata Rego Lins

    2016-01-01

    Objective To estimate the incidence of limitations to Advanced Life Support in critically ill patients admitted to an intensive care unit with integrated palliative care. Methods This retrospective cohort study included patients in the palliative care program of the intensive care unit of Hospital Paulistano over 18 years of age from May 1, 2011, to January 31, 2014. The limitations to Advanced Life Support that were analyzed included do-not-resuscitate orders, mechanical ventilation, dialysis and vasoactive drugs. Central tendency measures were calculated for quantitative variables. The chi-squared test was used to compare the characteristics of patients with or without limits to Advanced Life Support, and the Wilcoxon test was used to compare length of stay after Advanced Life Support. Confidence intervals reflecting p ≤ 0.05 were considered for statistical significance. Results A total of 3,487 patients were admitted to the intensive care unit, of whom 342 were included in the palliative care program. It was observed that after entering the palliative care program, it took a median of 2 (1 - 4) days for death to occur in the intensive care unit and 4 (2 - 11) days for hospital death to occur. Many of the limitations to Advanced Life Support (42.7%) took place on the first day of hospitalization. Cardiopulmonary resuscitation (96.8%) and ventilatory support (73.6%) were the most adopted limitations. Conclusion The contribution of palliative care integrated into the intensive care unit was important for the practice of orthothanasia, i.e., the non-extension of the life of a critically ill patient by artificial means. PMID:27626949

  18. Integrated environmental decision support tool based on GIS technology

    International Nuclear Information System (INIS)

    Doctor, P.G.; O'Neil, T.K.; Sackschewsky, M.R.; Becker, J.M.; Rykiel, E.J.; Walters, T.B.; Brandt, C.A.; Hall, J.A.

    1995-01-01

    Environmental restoration and management decisions facing the US Department of Energy require balancing trade-offs between diverse land uses and impacts over multiple spatial and temporal scales. Many types of environmental data have been collected for the Hanford Site and the Columbia River in Washington State over the past fifty years. Pacific Northwest National Laboratory (PNNL) is integrating these data into a Geographic Information System (GIS) based computer decision support tool. This tool provides a comprehensive and concise description of the current environmental landscape that can be used to evaluate the ecological and monetary trade-offs between future land use, restoration and remediation options before action is taken. Ecological impacts evaluated include effects to individual species of concern and habitat loss and fragmentation. Monetary impacts include those associated with habitat mitigation. The tool is organized as both a browsing tool for educational purposes, and as a framework that leads a project manager through the steps needed to be in compliance with environmental requirements

  19. Liquid phase methanol LaPorte process development unit: Modification, operation, and support studies

    Energy Technology Data Exchange (ETDEWEB)

    1991-02-02

    This report consists of Detailed Data Acquisition Sheets for Runs E-6 and E-7 for Task 2.2 of the Modification, Operation, and Support Studies of the Liquid Phase Methanol Laporte Process Development Unit. (Task 2.2: Alternate Catalyst Run E-6 and Catalyst Activity Maintenance Run E-7).

  20. Controlling and Autonomy-Supportive Parenting in the United States and China: Beyond Children's Reports

    Science.gov (United States)

    Cheung, Cecilia S.; Pomerantz, Eva M.; Wang, Meifang; Qu, Yang

    2016-01-01

    Research comparing the predictive power of parents' control and autonomy support in the United States and China has relied almost exclusively on children's reports. Such reports may lead to inaccurate conclusions if they do not reflect parents' practices to the same extent in the two countries. A total of 394 American and Chinese children…

  1. A Methodology for Building Faculty Support for the United Nations Principles for Responsible Management Education

    Science.gov (United States)

    Maloni, Michael J.; Smith, Shane D.; Napshin, Stuart

    2012-01-01

    Evidence from extant literature indicates that faculty support is a critical driver for implementing the United Nations Principles for Responsible Management Education (PRME), particularly for schools pursuing an advanced, cross-disciplinary level of sustainability integration. However, there is limited existing research offering insight into how…

  2. A brief history of federal support for health physics education and training in the United States

    International Nuclear Information System (INIS)

    Ziemer, P.L.

    1996-01-01

    Since the formation of health physics as a profession following the end of World War II, the federal government of the United States has played an active role in the support of education and training of health physicists. The purpose of this paper is to review the types of federal support that have been available from the federal government in the past and to examine the current status of support. Individuals trained in health physics through the nuclear navy programs have not been included in this discussion. (author)

  3. PTC test bed upgrades to provide ACSES testing support capabilities at transportation technology center.

    Science.gov (United States)

    2015-06-01

    FRA Task Order 314 upgraded the Positive Train Control (PTC) Test Bed at the Transportation Technology Center to support : testing of PTC systems, components, and related equipment associated with the Advanced Civil Speed Enforcement System : (ACSES)...

  4. Cancer Detection, Diagnosis, and Treatment Technologies for Global Health: Supporting the developmen

    Science.gov (United States)

    NCI, Center for Global Health supports the development and validation of low-cost, portable technologies that can improve cancer detection, diagnosis, and treatment in low-and middle-income countries.

  5. Assessing the quality of decision support technologies using the International Patient Decision Aid Standards instrument (IPDASi).

    NARCIS (Netherlands)

    Elwyn, G.; O'Connor, A.M.; Bennett, C.; Newcombe, R.G.; Politi, M.; Durand, M.A.; Drake, E.; Joseph-Williams, N.; Khangura, S.; Saarimaki, A.; Sivell, S.; Stiel, M.; Bernstein, S.J.; Col, N.; Coulter, A.; Eden, K.; Harter, M.; Rovner, M.H.; Moumjid, N.; Stacey, D.; Thomson, R.; Whelan, T.; Weijden, G.D.E.M. van der; Edwards, A.

    2009-01-01

    OBJECTIVES: To describe the development, validation and inter-rater reliability of an instrument to measure the quality of patient decision support technologies (decision aids). DESIGN: Scale development study, involving construct, item and scale development, validation and reliability testing.

  6. National Institute of Occupational Safety and Health (NIOSH) Partnered Development of Cryogenic Life Support Technologies

    Data.gov (United States)

    National Aeronautics and Space Administration — Cryogenic life support technology, used by NASA to protect crews working around hazardous gases soon could be called on for a number of life-saving applications as...

  7. Prioritization of engineering support requests and advanced technology projects using decision support and industrial engineering models

    Science.gov (United States)

    Tavana, Madjid

    1995-01-01

    The evaluation and prioritization of Engineering Support Requests (ESR's) is a particularly difficult task at the Kennedy Space Center (KSC) -- Shuttle Project Engineering Office. This difficulty is due to the complexities inherent in the evaluation process and the lack of structured information. The evaluation process must consider a multitude of relevant pieces of information concerning Safety, Supportability, O&M Cost Savings, Process Enhancement, Reliability, and Implementation. Various analytical and normative models developed over the past have helped decision makers at KSC utilize large volumes of information in the evaluation of ESR's. The purpose of this project is to build on the existing methodologies and develop a multiple criteria decision support system that captures the decision maker's beliefs through a series of sequential, rational, and analytical processes. The model utilizes the Analytic Hierarchy Process (AHP), subjective probabilities, the entropy concept, and Maximize Agreement Heuristic (MAH) to enhance the decision maker's intuition in evaluating a set of ESR's.

  8. Support for the Confederate Battle Flag in the Southern United States: Racism or Southern Pride?

    Directory of Open Access Journals (Sweden)

    Joshua D. Wright

    2017-05-01

    Full Text Available Supporters of the Confederate battle flag often argue that their support is driven by pride in the South, not negative racial attitudes. Opponents of the Confederate battle flag often argue that the flag represents racism, and that support for the flag is an expression of racism and an attempt to maintain oppression of Blacks in the Southern United States. We evaluate these two competing views in explaining attitudes toward the Confederate battle flag in the Southern United States through a survey of 526 Southerners. In the aggregate, our latent variable model suggests that White support for the flag is driven by Southern pride, political conservatism, and blatant negative racial attitudes toward Blacks. Using cluster-analysis we were able to distinguish four distinct sub-groups of White Southerners: Cosmopolitans, New Southerners, Traditionalists, and Supremacists. The greatest support for the Confederate battle flag is seen among Traditionalists and Supremacists; however, Traditionalists do not display blatant negative racial attitudes toward Blacks, while Supremacists do. Traditionalists make up the majority of Confederate battle flag supporters in our sample, weakening the claim that supporters of the flag are generally being driven by negative racial attitudes toward Blacks.

  9. Care Management In The Family Health Support Core: Technologies Operated In The Professional Dimension

    OpenAIRE

    José Maria Ximenes Guimarães; Gerlane Holanda de Freitas; Aretha Feitosa de Araújo; Maria Claudia de Freitas Lima; Élcio Basílio Pereira Machado; Cleide Carneiro; Maria Elidiana de Araújo Gomes; Fernando Luiz Affonso Fonseca; Maria do Socorro Sousa; Myrla Alves de Oliveira; Tatyane Oliveira Rebouças; Eduardo Carvalho de Souza; Ana Maria Araújo Salomão

    2017-01-01

    Introduction: The Centre for Health Support Family - NASF has a innovative character with potential to concretize change in the organization of services and in care practices, supporting and expanding the solvability of the actions of the teams of the Family Health Strategy - FHS. To this end, it must operationalize technologies, arrangements and care management devices. Objective: To describe the care management technologies, particularly in the professional dimension, operated by the t...

  10. Support groups for mothers of newborns hospitalized in a neonatal unit

    Directory of Open Access Journals (Sweden)

    Elysangela Dittz Duarte

    2013-07-01

    Full Text Available Mothers’ stay with their babies at a neonatal intensive care unit requires the development of assistance initiatives that also take their needs into account. Games, leisure and educational activities, as well as support groups, are used to alleviate tensions, share information and foster socialization in hospital institutions. We sought to describe group activities during newborn mothers support and guidance. These mothers were hospitalized in the Neonatal Intensive Care Unit of the Sofia Feldman Hospital in Belo Horizonte/Minas Gerais in 2010. Data was collected from records provided by the institution professionals and the authors’ experiences. Support groups offer a discussion and listening environment, allowing the construction of alternatives to face difficulties resulting from hospitalization, thus stimulating maternal participation in child care and enabling the interaction between the mothers and the health care team.

  11. Technology licensing by advertising supported media platforms: An application to internet search engines

    OpenAIRE

    Sapi, Geza; Suleymanova, Irina

    2011-01-01

    We develop a duopoly model with advertising supported platforms and analyze incentives of a superior firm to license its advanced technologies to an inferior rival. We highlight the role of two technologies characteristic for media platforms: The technology to produce content and to place advertisements. Licensing incentives are driven solely by indirect network effects arising fromthe aversion of users to advertising. We establish a relationship between licensing incentives and the nature of...

  12. Cost (and Quality and Value) of Information Technology Support in Large Research Universities.

    Science.gov (United States)

    Peebles, Christopher S.; Antolovic, Laurie

    1999-01-01

    Shows how financial and quality measures associated with the Balanced Scorecard (developed by Kaplan and Norton to measure organizational performance) can be applied to information technology (IT) user education and support in large research universities. Focuses on University Information Technology Services that has measured the quality of IT…

  13. Entry-Level Information Services and Support Personnel: Needed Workplace and Technology Skills.

    Science.gov (United States)

    Awang, Faridah; Anderson, Marcia A.; Baker, Clora Mae

    2003-01-01

    Responses to an Illinois survey by 19 human resource managers and 26 university and 71 community college information systems instructors rated the importance of workplace and technology skills for entry-level information services and support personnel. Both groups ranked nontechnical/soft skills and information technology certification as…

  14. Technology Use as a Support Tool by Secondary Students with Autism

    Science.gov (United States)

    Hedges, Susan H.; Odom, Samuel L.; Hume, Kara; Sam, Ann

    2018-01-01

    The purpose of this study was to examine how secondary students with autism spectrum disorder use technology in supportive ways. In this self-report survey study, 472 adolescents with autism spectrum disorder enrolled in high school described the forms of technology they use and purposes for which they use it. Students reported the benefits as…

  15. Supporting Self-Organized Learning with Personal Webpublishing Technologies and Practices

    Science.gov (United States)

    Sharma, Priya; Fiedler, Sebastian

    2007-01-01

    In this paper, we suggest that self-organized learning can be supported through emergent and informal Web technologies and propose that these technologies can be used to encourage similar practices in higher education. Self-organized learning aims at increasing individual control over instructional functions through a process that involves…

  16. eLabEL: Technology-supported living labs in primary care

    NARCIS (Netherlands)

    Vermeulen, Joan; Huygens, Martine; de Witte, Luc P.; Oude Nijeweme-d'Hollosy, Wendeline; Swinkels, Ilse; van Velsen, Lex Stefan; Jansen, Yvonne

    2015-01-01

    Telecare technologies and eHealth applications can support patients and care professionals. However, these technologies are currently not being implemented in primary care. The eLabEL project aims to contribute to a solution for this problem by establishing Living Labs in which patients, healthcare

  17. Emplotment, Embodiment, Engagement: Narrative Technology in Support of Physical Education, Sport and Physical Activity

    Science.gov (United States)

    Hall, Tony

    2012-01-01

    This paper is based on a keynote lecture delivered at the International Association of Physical Education in Higher Education 2011 Conference, University of Limerick, on the sub theme: "Technologies in Support of Physical Education, Sport, and Physical Activity." The paper outlines and illustrates a framework: narrative technology, which can be…

  18. The Impact of a Geospatial Technology-Supported Energy Curriculum on Middle School Students' Science Achievement

    Science.gov (United States)

    Kulo, Violet; Bodzin, Alec

    2013-01-01

    Geospatial technologies are increasingly being integrated in science classrooms to foster learning. This study examined whether a Web-enhanced science inquiry curriculum supported by geospatial technologies promoted urban middle school students' understanding of energy concepts. The participants included one science teacher and 108 eighth-grade…

  19. Effects of Patient Care Unit Design and Technology on Nurse and Patient Care Technician Communication.

    Science.gov (United States)

    Beck, Mary S; Doscher, Mindy

    2018-04-01

    The current study described RN and patient care technician (PCT) communication in centralized and hybrid decentralized workstation designs using hands-free communication technology and infrared locator badge technology to facilitate communication. New construction of an oncology unit provided the opportunity to compare staff communication in two different workstation designs. Observations and questionnaires compared nurse and PCT communication in the two-unit designs. Descriptive statistics were used to analyze the differences. The hybrid decentralized unit had increased use of hands-free communication technology and hallway communication by nurses and PCTs, and increased patient room communication by nurses. Perceptions of communication between nurses and PCTs and congruency of priorities for care were similar for both units. The locator badge technology had limited adoption. Replacement of nurse workstations with new construction or remodeling impact staff communication patterns, necessitating that nurse leaders understand the impact of design and technology on communication. [Journal of Gerontological Nursing, 44(4), 17-22.]. Copyright 2018, SLACK Incorporated.

  20. Infectious disease surveillance in the United States and the United Kingdom: from public goods to the challenges of new technologies.

    Science.gov (United States)

    Barnett, Tony; Sorenson, Corinna

    2011-02-01

    Infectious diseases are a long-standing and continuing threat to health and welfare, with their containment dependent on national disease surveillance and response capacities. This article discusses infectious disease surveillance in the United States and the United Kingdom, examining historical national traditions for identifying and controlling infectious disease risks and how globalization and technical advances have influenced the evolution of their respective approaches. The two systems developed in different but parallel ways. In the United States, surveillance remained quite localized at the state level until the early twentieth century and still retains many of those features. The U.K. approach became centralized from the latter part of the nineteenth century and has principally remained so. In both cases, disease surveillance was traditionally conceived as a public good, where national or local authorities held sovereign rights and power to protect public health. With the increasing globalized nature of infectious disease, such notions shifted toward surveillance as a global public good, with countries responding in turn by creating new global health governance arrangements and regulations. However, the limitations of current surveillance systems and the strong hold of national interests place into question the provision of surveillance as a global public good. These issues are further highlighted with the introduction of new surveillance technologies, which offer opportunities for improved disease detection and identification but also create potential tensions between individual rights, corporate profit, equitable access to technology, and national and global public goods.

  1. Effectiveness of Information Technology Infrastructure Library Process Implementations by Information Technology Departments within United States Organizations

    Science.gov (United States)

    Persinger, Jon F.

    2010-01-01

    This research study examined whether the overall effectiveness of the Information Technology Infrastructure Library (ITIL) could be predicted by measuring multiple independent variables. The primary variables studied included the number of ITIL process modules adopted and the overall ITIL "maturity level." An online survey was used to…

  2. Survey of information technology in Intensive Care Units in Ontario, Canada

    Directory of Open Access Journals (Sweden)

    Hallett David

    2008-01-01

    Full Text Available Abstract Background The Intensive Care Unit (ICU is a data-rich environment where information technology (IT may enhance patient care. We surveyed ICUs in the province of Ontario, Canada, to determine the availability, implementation and variability of information systems. Methods A self-administered internet-based survey was completed by ICU directors between May and October 2006. We measured the spectrum of ICU clinical data accessible electronically, the availability of decision support tools, the availability of electronic imaging systems for radiology, the use of electronic order entry and medication administration systems, and the availability of hardware and wireless or mobile systems. We used Fisher's Exact tests to compare IT availability and Classification and Regression Trees (CART to estimate the optimal cut-point for the number of computers per ICU bed. Results We obtained responses from 50 hospitals (68.5% of institutions with level 3 ICUs, of which 21 (42% were university-affiliated. The majority electronically accessed laboratory data and imaging reports (92% and used picture archiving and communication systems (PACS (76%. Other computing functions were less prevalent (medication administration records 46%, physician or nursing notes 26%; medication order entry 22%. No association was noted between IT availability and ICU size or university affiliation. Sites used clinical information systems from15 different vendors and 8 different PACS systems were in use. Half of the respondents described the number of computers available as insufficient. Wireless networks and mobile computing systems were used in 23 ICUs (46%. Conclusion Ontario ICUs demontrate a high prevalence of the use of basic information technology systems. However, implementation of the more complex and potentially more beneficial applications is low. The wide variation in vendors utilized may impair information exchange, interoperability and uniform data collection.

  3. Definition of common support equipment and space station interface requirements for IOC model technology experiments

    Science.gov (United States)

    Russell, Richard A.; Waiss, Richard D.

    1988-01-01

    A study was conducted to identify the common support equipment and Space Station interface requirements for the IOC (initial operating capabilities) model technology experiments. In particular, each principal investigator for the proposed model technology experiment was contacted and visited for technical understanding and support for the generation of the detailed technical backup data required for completion of this study. Based on the data generated, a strong case can be made for a dedicated technology experiment command and control work station consisting of a command keyboard, cathode ray tube, data processing and storage, and an alert/annunciator panel located in the pressurized laboratory.

  4. An Ethnographic Study of Health Information Technology Use in Three Intensive Care Units.

    Science.gov (United States)

    Leslie, Myles; Paradis, Elise; Gropper, Michael A; Kitto, Simon; Reeves, Scott; Pronovost, Peter

    2017-08-01

    To identify the impact of a full suite of health information technology (HIT) on the relationships that support safety and quality among intensive care unit (ICU) clinicians. A year-long comparative ethnographic study of three academic ICUs was carried out. A total of 446 hours of observational data was collected in the form of field notes. A subset of these observations-134 hours-was devoted to job-shadowing individual clinicians and conducting a time study of their HIT usage. Significant variation in HIT implementation rates and usage was noted. Average HIT use on the two "high-use" ICUs was 49 percent. On the "low-use" ICU, it was 10 percent. Clinicians on the high-use ICUs experienced "silo" effects with potential safety and quality implications. HIT work was associated with spatial, data, and social silos that separated ICU clinicians from one another and their patients. Situational awareness, communication, and patient satisfaction were negatively affected by this siloing. HIT has the potential to accentuate social and professional divisions as clinical communications shift from being in-person to electronically mediated. Socio-technically informed usability testing is recommended for those hospitals that have yet to implement HIT. For those hospitals already implementing HIT, we suggest rapid, locally driven qualitative assessments focused on developing solutions to identified gaps between HIT usage patterns and organizational quality goals. © Health Research and Educational Trust.

  5. [General practice research units in Denmark: multidisciplinary research in support of practical work].

    Science.gov (United States)

    Reventlow, Susanne; Broholm, Katalin Alexa Király; Mäkelä, Marjukka

    2014-01-01

    In Denmark the general practice research units operating in connection with universities provide a home base, training and methodology support for researchers in the field from medical students to general practitioners carrying out practical work. Research issues frequently require a multidisciplinary approach and use of different kinds of materials. Problems arising from the practical work of general practitioners take priority in the wide selection of topics. The units have networked efficiently with organizations of general practitioners and medical education. The combination of research environments has created synergy benefiting everybody and increased the scientific productivity and visibility of the field.

  6. United Nations system efforts to support the response to AIDS in China.

    Science.gov (United States)

    He, Jing Lin; Rehnstrom, Joel

    2005-01-01

    In the last two years, we have seen a remarkable intensification in the response to AIDS in China. A number of organizations have joined and contributed to the efforts of the Chinese government in responding the AIDS epidemic in China. This article specifically describes the role of the United Nations (UN) in supporting and strengthening those responses. Achievements of the United Nations highlighted in the article include: strengthened leadership and political commitment to respond to AIDS; improved HIV/AIDS surveillance and information; expanded prevention efforts; improved treatment, care and support to people living with HIV and increased resources for AIDS programs. Additional roles of the United Nations system in the near future include strengthening national leadership by supporting the 'three ones', i.e., one national plan on AIDS; one national coordinating authority for AIDS; and one monitoring and evaluation system for AIDS. In addition, the UN system is expected to strengthen alignment and harmonization of activities of all international organizations and improved accountability and oversight. Remaining challenges identified include increasing awareness of AIDS and reducing stigma and discrimination; reducing vulnerability and risk behaviour among specific groups; providing improved treatment, care and support for people living with HIV; promoting stronger engagement by civil society, and; addressing the gender dimensions of AIDS.

  7. Risk, security and technology: governing football supporters in the twenty-first century

    NARCIS (Netherlands)

    Spaaij, R.

    2013-01-01

    This paper critically examines the security and risk management technologies that are being used to conduct and pre-empt the behaviour of football supporters. It is shown how, in the Netherlands, pre-emptive risk management in the governing of football supporters involves a dispersed and fragmented

  8. Supporting Training of Expertise with Wearable Technologies: The WEKIT Reference Framework

    NARCIS (Netherlands)

    Limbu, Bibeg; Fominykh, Mikhail; Klemke, Roland; Specht, Marcus; Wild, Fridolin

    2018-01-01

    In this chapter, we present a conceptual reference framework for designing augmented reality applications for supporting training. The framework leverages the capabilities of modern augmented reality and wearable technology for capturing the expert’s performance in order to support expertise

  9. Using Technologies to Support the Social and Academic Engagement of Young People with Cancer

    Science.gov (United States)

    Donovan, Owen M.

    2017-01-01

    Situated in the larger questions of how to support the educational engagement and positive psychosocial development of young people with cancer, the purpose of this exploratory study was to address gaps in the literature and build understanding of how young people use digital and Internet-connected technologies in ways that support their social…

  10. Supporting Fourth Graders' Ability to Interpret Graphs through Real-Time Graphing Technology: A Preliminary Study

    Science.gov (United States)

    Deniz, Hasan; Dulger, Mehmet F.

    2012-01-01

    This study examined to what extent inquiry-based instruction supported with real-time graphing technology improves fourth grader's ability to interpret graphs as representations of physical science concepts such as motion and temperature. This study also examined whether there is any difference between inquiry-based instruction supported with…

  11. Hospital Adoption of Health Information Technology to Support Public Health Infrastructure.

    Science.gov (United States)

    Walker, Daniel M; Diana, Mark L

    2016-01-01

    Health information technology (IT) has the potential to improve the nation's public health infrastructure. In support of this belief, meaningful use incentives include criteria for hospitals to electronically report to immunization registries, as well as to public health agencies for reportable laboratory results and syndromic surveillance. Electronic reporting can facilitate faster and more appropriate public health response. However, it remains unclear the extent that hospitals have adopted IT for public health efforts. To examine hospital adoption of IT for public health and to compare hospitals capable of using and not using public health IT. Cross-sectional design with data from the 2012 American Hospital Association annual survey matched with data from the 2013 American Hospital Association Information Technology Supplement. Multivariate logistic regression was used to compare hospital characteristics. Inverse probability weights were applied to adjust for selection bias because of survey nonresponse. All acute care general hospitals in the United States that matched across the surveys and had complete data available were included in the analytic sample. Three separate outcome measures were used: whether the hospital could electronically report to immunization registries, whether the hospital could send electronic laboratory results, and whether the hospital can participate in syndromic surveillance. A total of 2841 hospitals met the inclusion criteria. Weighted results show that of these hospitals, 62.7% can electronically submit to immunization registries, 56.6% can electronically report laboratory results, and 54.4% can electronically report syndromic surveillance. Adjusted and weighted results from the multivariate analyses show that small, rural hospitals and hospitals without electronic health record systems lag in the adoption of public health IT capabilities. While a majority of hospitals are using public health IT, the infrastructure still has

  12. International technology exchange in support of the Defense Waste Processing Facility wasteform production

    International Nuclear Information System (INIS)

    Kitchen, B.G.

    1989-01-01

    The nearly completed Defense Waste Processing Facility (DWPF) is a Department of Energy (DOE) facility at the Savannah River Site that is designed to immobilize defense high level radioactive waste (HLW) by vitrification in borosilicate glass and containment in stainless steel canisters suitable for storage in the future DOE HLW repository. The DWPF is expected to start cold operation later this year (1990), and will be the first full scale vitrification facility operating in the United States, and the largest in the world. The DOE has been coordinating technology transfer and exchange on issues relating to HLW treatment and disposal through bi-lateral agreements with several nations. For the nearly fifteen years of the vitrification program at Savannah River Laboratory, over two hundred exchanges have been conducted with a dozen international agencies involving about five-hundred foreign national specialists. These international exchanges have been beneficial to the DOE's waste management efforts through confirmation of the choice of the waste form, enhanced understanding of melter operating phenomena, support for paths forward in political/regulatory arenas, confirmation of costs for waste form compliance programs, and establishing the need for enhancements of melter facility designs. This paper will compare designs and schedules of the international vitrification programs, and will discuss technical areas where the exchanges have provided data that have confirmed and aided US research and development efforts, impacted the design of the DWPF and guided the planning for regulatory interaction and product acceptance

  13. The use of information and communication technologies to support working carers of older people - a qualitative secondary analysis.

    Science.gov (United States)

    Andersson, Stefan; Magnusson, Lennart; Hanson, Elizabeth

    2016-03-01

    Family care support services have mainly focused on older spousal carers of older people and have largely overlooked working carers, whom combine paid work with informal/family care responsibilities. Recently, however, information and communication technology (ICT) systems have been identified as a potentially flexible way of supporting working carers. The aim of this study was to describe nursing and support staff's experiences of using ICT for information, e-learning and support of working carers of older people. The study employed a descriptive, qualitative approach conducting a qualitative secondary analysis of two original data sets. In total, seventeen professional staff members from two municipal family carer support units in Sweden that had implemented ICTs were interviewed using a semi-structured interview guide consisting of open-ended questions. Two data sets were merged using latent qualitative content analysis. Secondary analysis produced three subthemes and an overall theme, a virtual road as a carriageway for the support of working carers, consisting of both enabling and hindering aspects in family support. This theme provides access points in both directions and is based on caring instruments that enable nursing staff's support role. The staff's sustainability and ability to support is influenced by caring opportunities and barriers. The findings suggest the ICTs to be flexible structures that provided nursing staff with a means and method to support working carers of older people. To overcome barriers to its use, measures to optimise support for working carers and the older person are needed. The use of ICTs provides nurses with a means to offer support to working carers of older people and enables carers to be informed, to learn and to share their burdens with others when caring for an older family member. © 2015 John Wiley & Sons Ltd.

  14. Implementation of workflow engine technology to deliver basic clinical decision support functionality

    Science.gov (United States)

    2011-01-01

    Background Workflow engine technology represents a new class of software with the ability to graphically model step-based knowledge. We present application of this novel technology to the domain of clinical decision support. Successful implementation of decision support within an electronic health record (EHR) remains an unsolved research challenge. Previous research efforts were mostly based on healthcare-specific representation standards and execution engines and did not reach wide adoption. We focus on two challenges in decision support systems: the ability to test decision logic on retrospective data prior prospective deployment and the challenge of user-friendly representation of clinical logic. Results We present our implementation of a workflow engine technology that addresses the two above-described challenges in delivering clinical decision support. Our system is based on a cross-industry standard of XML (extensible markup language) process definition language (XPDL). The core components of the system are a workflow editor for modeling clinical scenarios and a workflow engine for execution of those scenarios. We demonstrate, with an open-source and publicly available workflow suite, that clinical decision support logic can be executed on retrospective data. The same flowchart-based representation can also function in a prospective mode where the system can be integrated with an EHR system and respond to real-time clinical events. We limit the scope of our implementation to decision support content generation (which can be EHR system vendor independent). We do not focus on supporting complex decision support content delivery mechanisms due to lack of standardization of EHR systems in this area. We present results of our evaluation of the flowchart-based graphical notation as well as architectural evaluation of our implementation using an established evaluation framework for clinical decision support architecture. Conclusions We describe an implementation of

  15. Implementation of workflow engine technology to deliver basic clinical decision support functionality

    Directory of Open Access Journals (Sweden)

    Oberg Ryan

    2011-04-01

    Full Text Available Abstract Background Workflow engine technology represents a new class of software with the ability to graphically model step-based knowledge. We present application of this novel technology to the domain of clinical decision support. Successful implementation of decision support within an electronic health record (EHR remains an unsolved research challenge. Previous research efforts were mostly based on healthcare-specific representation standards and execution engines and did not reach wide adoption. We focus on two challenges in decision support systems: the ability to test decision logic on retrospective data prior prospective deployment and the challenge of user-friendly representation of clinical logic. Results We present our implementation of a workflow engine technology that addresses the two above-described challenges in delivering clinical decision support. Our system is based on a cross-industry standard of XML (extensible markup language process definition language (XPDL. The core components of the system are a workflow editor for modeling clinical scenarios and a workflow engine for execution of those scenarios. We demonstrate, with an open-source and publicly available workflow suite, that clinical decision support logic can be executed on retrospective data. The same flowchart-based representation can also function in a prospective mode where the system can be integrated with an EHR system and respond to real-time clinical events. We limit the scope of our implementation to decision support content generation (which can be EHR system vendor independent. We do not focus on supporting complex decision support content delivery mechanisms due to lack of standardization of EHR systems in this area. We present results of our evaluation of the flowchart-based graphical notation as well as architectural evaluation of our implementation using an established evaluation framework for clinical decision support architecture. Conclusions We

  16. Partner support and impact on birth outcomes among teen pregnancies in the United States.

    Science.gov (United States)

    Shah, Monisha K; Gee, Rebekah E; Theall, Katherine P

    2014-02-01

    Despite hypothesized relationships between lack of partner support during a woman's pregnancy and adverse birth outcomes, few studies have examined partner support among teens. We examined a potential proxy measure of partner support and its impact on adverse birth outcomes (low birth weight (LBW), preterm birth (PTB) and pregnancy loss) among women who have had a teenage pregnancy in the United States. In a secondary data analysis utilizing cross-sectional data from 5609 women who experienced a teen pregnancy from the 2006-2010 National Survey of Family Growth (NSFG), we examined an alternative measure of partner support and its impact on adverse birth outcomes. Bivariate and multivariable logistic regression were used to assess differences in women who were teens at time of conception who had partner support during their pregnancy and those who did not, and their birth outcomes. Even after controlling for potential confounding factors, women with a supportive partner were 63% less likely to experience LBW [aOR: 0.37, 95% CI: (0.26-0.54)] and nearly 2 times less likely to have pregnancy loss [aOR: 0.48, 95% CI: (0.32-0.72)] compared to those with no partner support. Having partner support or involvement during a teenager's pregnancy may reduce the likelihood of having a poor birth outcome. Copyright © 2014 North American Society for Pediatric and Adolescent Gynecology. Published by Elsevier Inc. All rights reserved.

  17. Guiding principles for good practices in hospital-based health technology assessment units

    DEFF Research Database (Denmark)

    Sampietro-Colom, Laura; Lach, Krzysztof; Pasternack, Iris

    2015-01-01

    OBJECTIVES: Health technology assessment (HTA) carried out for policy decision making has well-established principles unlike hospital-based HTA (HB-HTA), which differs from the former in the context characteristics and ways of operation. This study proposes principles for good practices in HB....... In total, 385 people from twenty countries have participated in defining the principles for good practices in HB-HTA units. RESULTS: Fifteen guiding principles for good practices in HB-HTA units are grouped in four dimensions. Dimension 1 deals with principles of the assessment process aimed at providing......- and long-term impact of the overall performance of HB-HTA units. Finally, nine core guiding principles were selected as essential requirements for HB-HTA units based on the expertise of the HB-HTA units participating in the project. CONCLUSIONS: Guiding principles for good practices set up a benchmark...

  18. US country studies program: Support for climate change studies, national plans, and technology assessments

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    This paper describes the objectives of the next phase of the U.S. Country Studies Program which was launched in support of the Framework Convention on Climate Change (FCCC). The next phases of this program aim to: assist countries in preparing Climate Change Action plans; support technology assessments and development of technology initiatives; enhance exchange of information and expertise in support of FCCC. The program offers support for these processes in the form of handbooks which have been published to aid in preparing action plans, and to provide information on methane, forestry, and energy technologies. In addition an array of training workshops have been and are scheduled to offer hands on instruction to participants, expert advice is available from trained personnel, and modeling tools are available to aid in development of action plans.

  19. Seizure reporting technologies for epilepsy treatment: A review of clinical information needs and supporting technologies.

    Science.gov (United States)

    Bidwell, Jonathan; Khuwatsamrit, Thanin; Askew, Brittain; Ehrenberg, Joshua Andrew; Helmers, Sandra

    2015-11-01

    This review surveys current seizure detection and classification technologies as they relate to aiding clinical decision-making during epilepsy treatment. Interviews and data collected from neurologists and a literature review highlighted a strong need for better distinguishing between patients exhibiting generalized and partial seizure types as well as achieving more accurate seizure counts. This information is critical for enabling neurologists to select the correct class of antiepileptic drugs (AED) for their patients and evaluating AED efficiency during long-term treatment. In our questionnaire, 100% of neurologists reported they would like to have video from patients prior to selecting an AED during an initial consultation. Presently, only 30% have access to video. In our technology review we identified that only a subset of available technologies surpassed patient self-reporting performance due to high false positive rates. Inertial seizure detection devices coupled with video capture for recording seizures at night could stand to address collecting seizure counts that are more accurate than current patient self-reporting during day and night time use. Copyright © 2015. Published by Elsevier Ltd.

  20. Work, family, support, and depression: employed mothers in Israel, Korea, and the United States.

    Science.gov (United States)

    O'Brien, Karen M; Ganginis Del Pino, Heather V; Yoo, Sung-Kyung; Cinamon, Rachel Gali; Han, Young-Joo

    2014-07-01

    Our research revealed differences in work-family constructs for employed mothers in 3 countries, Israel (N = 105), Korea (N = 298), and the United States (N = 305). Although levels of work-family conflict were comparable, the Korean women had the lowest levels of work-family enrichment compared with the Israeli and American mothers. Moreover, Korean women reported the most depression and the least support from both spouses and employers. Spousal support mediated the relationship between work-family conflict and depression for employed mothers in Israel, Korea, and the United States. As hypothesized by conservation of resources theory (Hobfoll, 1989, 1998, 2001), threat of resource loss (operationalized as work-family conflict) was related to depression more strongly than was resource gain (i.e., work-family enrichment). PsycINFO Database Record (c) 2014 APA, all rights reserved.

  1. Stages of Adoption Concern and Technology Acceptance in a Critical Care Nursing Unit.

    Science.gov (United States)

    Berg, Gina M; LoCurto, Jamie; Lippoldt, Diana

    2017-09-01

    The aim of this study is to examine the stages of concern (self, task, and impact) and usability (trust, perceived usefulness, and ease of use) shifts experienced by nurses adopting new technology. Patient care processes in critical care units can be disrupted with the incorporation of information technology. New users of technology typically transition through stages of concern and experience shifts in acceptance during assimilation. Critical care nurses (N = 41) were surveyed twice: (1) pre, immediately after training, and (2) post, 3 months after implementation of technology. From presurvey to postsurvey, self-concerns decreased 14%, whereas impact concerns increased 22%. Furthermore, there was a 30% increase in trust and a 17% increase in perceived usefulness, even with a 27% decrease in ease of use. Adoption of new technology requires critical care nurses to adapt current practices, which may improve trust and perceived usefulness yet decrease perceptions of ease of use.

  2. Experience of the United States in Hosting and Supporting IAEA Peer Review Missions

    International Nuclear Information System (INIS)

    Mamish, N.

    2016-01-01

    The International Atomic Energy Agency (IAEA) provides a number of peer review services to its Member States. The United States has strongly supported these peer reviews since their inception. In 2010, the United States hosted an Integrated Regulatory Review Service (IRRS) mission, with a follow-up mission completed in 2014. The missions provided valuable recommendations and suggestions, identified a number of best practices, and acknowledged the prompt and effective actions taken by the NRC following the Fukushima Daiichi accident. Through hosting an International Physical Protection Advisory Service (IPPAS) mission in 2013, the United States benefited both from the insights provided by the team, as well as the U.S. Government’s gap analyses and preparatory efforts in advance of the mission. The United States strongly supports the IAEA’s Operational Safety Review Team (OSART) program, inviting a peer review mission to a U.S. nuclear power plant every 3 years. Although OSART is an operational, not regulatory, peer review, the NRC provides funding for the mission and gives inspection credit to operators that host them. The United States also contributes significant technical expertise to IAEA peer review missions hosted by other Member States. With the IRRS and IPPAS reaching their 10th and 20th anniversaries respectively, these programs have improved as they have matured. However, it remains critical for Member States to continue to support these programs, and provide feedback to the IAEA Secretariat on their effectiveness and areas where IAEA might enhance them. Doing so will ensure peer reviews remain an effective tool for strengthening nuclear safety and security worldwide. (author)

  3. Using Mobile Phone Technology to Support Young Liver Transplant Recipients Moving to Adult Services.

    Science.gov (United States)

    Coad, Jane; Toft, Alex; Claridge, Lee; Ferguson, James; Hind, Jonathon; Jones, Rebecca; McClean, Patricia; McKiernan, Patrick; Samyn, Marianne; Taylor, Rachel

    2017-06-01

    The process and preparation of moving from child to adult services (transition) is a challenging period of time for young people and represents significant changes in care and support systems. The proliferation of mobile phone applications for health purposes suggests that it is an area for further investigation. The review explores the potential to use mobile phone technology to help support young liver transplant recipients moving to adult services. It represents the first review conducted in this specialism and considers a new model of support for young liver patients. A systematic rapid review of the published peer-reviewed literature. Two searches were conducted: Search 1: the use of technology to support transition to adult services (6 studies) and Search 2: how best to support liver transplant recipients during transition (6 studies). Research shows that to achieve positive transition young people need information about their condition and transition. The process needs to be guided by transition readiness, rather than the young persons' age. Although parents and support networks should be in place and are valued, transition should build upon self-management and independence. Results suggest that there appears to be scope to use mobile phone technology to support transition. This is the first time a review has explored the types of issues or concerns facing liver transplant patients and how these can be addressed through mobile phone technology.

  4. Implementation of Personnel Support Centers in the United States Coast Guard.

    Science.gov (United States)

    1983-06-01

    Development, Goodyear Publishing Co. 1980. Also attributed to David 3. Gleicher in Richard Beckhard and Reuben Harris, Organizational Transitions... Richard D. Irwin, Inc., 1980. 3eckhard, R., Organization Development: Strategies and Models, Addison-Lesley, 19o9. Beckhard , R. and Harris, R.T...MPLEMENTATION OF PERSONNEL SUPPORT CENTERS IN THE UNITED STATES COAST GUARD oy ’hilip Edward Sherer June 1983 Thesis Advisor: Richard A. McGcnigal

  5. Dismantling support project for the Bohunice Nuclear Power Plant Units 1 and 2 (Slovakia)

    International Nuclear Information System (INIS)

    Sanchez-Mayoral, M. L.; Gonzalez, J.; Lamela, B.

    2004-01-01

    The consortium formed by IBERDROLA Ingenieria y Consultoria, leading company, Electricite de France, Empresarios Agrupados, Internacional,. S. A., and Soluziona Ingenieria has been awarded the decommissioning support project for the Units 1 and 2 of Bohunice V1 Nuclear Power Plant (Slovakia). The plant and the site, the activities to be developed and the main characteristics of the project are described in this paper. (Author)

  6. The toy library service at Honeylands Family Support Unit: an assessment.

    Science.gov (United States)

    Rub, S

    1987-01-01

    Toy libraries have become a favoured way of providing a service to families in which there is a mentally handicapped child. The purpose of this study was to gain information about how parents valued the service provided by the toy library at Honeylands Family Support Unit. Parents expressed a great deal of satisfaction with the service. Suggestions are made as to how it could be further improved and about the desirability of it being extended to school-aged children.

  7. Decision support for selecting exportable nuclear technology using the analytic hierarchy process. A Korean case

    International Nuclear Information System (INIS)

    Lee, Deok Joo; Hwang, Jooho

    2010-01-01

    The Korean government plans to increase strategically focused R and D investment in some promising nuclear technology areas to create export opportunities of technology in a global nuclear market. The purpose of this paper is to present a decision support process for selecting promising nuclear technology with the perspective of exportability by using the AHP based on extensive data gathered from nuclear experts in Korea. In this study, the decision criteria for evaluating the export competitiveness of nuclear technologies were determined, and a hierarchical structure for the decision-making process was systematically developed. Subsequently relative weights of decision criteria were derived using AHP methodology and the export competitiveness of nuclear technology alternatives was quantified to prioritize them. We discuss the implications of our results with a viewpoint toward national nuclear technology policy. (author)

  8. Critical Success in E-learning: An Examination of Technological and Institutional Support Factors

    Directory of Open Access Journals (Sweden)

    Maslin Masrom

    2008-12-01

    Full Text Available In recent years, information technology (IT becomes prominent to support teaching and learning activities. IT tools allow us to create, collect, store and use the information and knowledge. E-learning was one of IT tools introduced at College of Science and Technology (CST, University Technology Malaysia (UTM Kuala Lumpur since 2001. It has enabled a paradigm shift from institutio n-centered instruction to anywhere, anytime and anybody learning models. In CST the e-learning technology was used for accessing the syllabus and course content, submitting assignments, and taking class quizzes. This paper focuses on issues relating to the e-learning critical success factors (CSFs from university students’ perspective. In this study, two main factors related to the e-learning CSFs within a university environment included technological and institutional support factors were examined. Confirmatory factor modeling approach was used to assess the criticality of the measures included in each factor. The results indicated that the most critical measures for technological factor in terms of ease of access and infrastructure are the browser efficiency, course website ease of use and computer network reliability. Meanwhile, for institutional support factor, the most critical measure is the availability of technical support or help desk.

  9. Technology status in support of refined technical baseline for the Spent Nuclear Fuel project. Revision 1

    International Nuclear Information System (INIS)

    Puigh, R.J.; Toffer, H.; Heard, F.J.; Irvin, J.J.; Cooper, T.D.

    1995-01-01

    The Spent Nuclear Fuel Project (SNFP) has undertaken technology acquisition activities focused on supporting the technical basis for the removal of the N Reactor fuel from the K Basins to an interim storage facility. The purpose of these technology acquisition activities has been to identify technology issues impacting design or safety approval, to establish the strategy for obtaining the necessary information through either existing project activities, or the assignment of new work. A set of specific path options has been identified for each major action proposed for placing the N Reactor fuel into a ''stabilized'' form for interim storage as part of this refined technical basis. This report summarizes the status of technology information acquisition as it relates to key decisions impacting the selection of specific path options. The following specific categories were chosen to characterize and partition the technology information status: hydride issues and ignition, corrosion, hydrogen generation, drying and conditioning, thermal performance, criticality and materials accountability, canister/fuel particulate behavior, and MCO integrity. This report represents a preliminary assessment of the technology information supporting the SNFP. As our understanding of the N Reactor fuel performance develops the technology information supporting the SNFP will be updated and documented in later revisions to this report. Revision 1 represents the incorporation of peer review comments into the original document. The substantive evolution in our understanding of the technical status for the SNFP (except section 3) since July 1995 have not been incorporated into this revision

  10. Geothermal Technologies Program Geoscience and Supporting Technologies 2001 University Research Summaries

    Energy Technology Data Exchange (ETDEWEB)

    Creed, R.J.; Laney, P.T.

    2002-05-14

    The U.S. Department of Energy Office of Wind and Geothermal Technologies (DOE) is funding advanced geothermal research through University Geothermal Research solicitations. These solicitations are intended to generate research proposals in the areas of fracture permeability location and characterization, reservoir management and geochemistry. The work funded through these solicitations should stimulate the development of new geothermal electrical generating capacity through increasing scientific knowledge of high-temperature geothermal systems. In order to meet this objective researchers are encouraged to collaborate with the geothermal industry. These objectives and strategies are consistent with DOE Geothermal Energy Program strategic objectives.

  11. Geothermal Technologies Program Geoscience and Supporting Technologies 2001 University Research Summaries

    Energy Technology Data Exchange (ETDEWEB)

    Creed, Robert John; Laney, Patrick Thomas

    2002-06-01

    The U.S. Department of Energy Office of Wind and Geothermal Technologies (DOE) is funding advanced geothermal research through University Geothermal Research solicitations. These solicitations are intended to generate research proposals in the areas of fracture permeability location and characterization, reservoir management and geochemistry. The work funded through these solicitations should stimulate the development of new geothermal electrical generating capacity through increasing scientific knowledge of high-temperature geothermal systems. In order to meet this objective researchers are encouraged to collaborate with the geothermal industry. These objectives and strategies are consistent with DOE Geothermal Energy Program strategic objectives.

  12. Geothermal Technologies Program Geoscience and Supporting Technologies 2001 University Research Summaries

    International Nuclear Information System (INIS)

    Creed, R.J.; Laney, P.T.

    2002-01-01

    The U.S. Department of Energy Office of Wind and Geothermal Technologies (DOE) is funding advanced geothermal research through University Geothermal Research solicitations. These solicitations are intended to generate research proposals in the areas of fracture permeability location and characterization, reservoir management and geochemistry. The work funded through these solicitations should stimulate the development of new geothermal electrical generating capacity through increasing scientific knowledge of high-temperature geothermal systems. In order to meet this objective researchers are encouraged to collaborate with the geothermal industry. These objectives and strategies are consistent with DOE Geothermal Energy Program strategic objectives

  13. Use of web services for computerized medical decision support, including infection control and antibiotic management, in the intensive care unit.

    Science.gov (United States)

    Steurbaut, Kristof; Van Hoecke, Sofie; Colpaert, Kirsten; Lamont, Kristof; Taveirne, Kristof; Depuydt, Pieter; Benoit, Dominique; Decruyenaere, Johan; De Turck, Filip

    2010-01-01

    The increasing complexity of procedures in the intensive care unit (ICU) requires complex software services, to reduce improper use of antibiotics and inappropriate therapies, and to offer earlier and more accurate detection of infections and antibiotic resistance. We investigated whether web-based software can facilitate the computerization of complex medical processes in the ICU. The COSARA application contains the following modules: Infection overview, Thorax, Microbiology, Antibiotic therapy overview, Admission cause with comorbidity and admission diagnosis, Infection linking and registration, and Feedback. After the implementation and test phase, the COSARA software was installed on a physician's office PC and then on the bedside PCs of the patients. Initial evaluation indicated that the services had been integrated easily into the daily clinical workflow of the medical staff. The use of a service oriented architecture with web service technology for the development of advanced decision support in the ICU offers several advantages over classical software design approaches.

  14. Availability of breastfeeding peer support in the United Kingdom: A cross-sectional study.

    Science.gov (United States)

    Grant, Aimee; McEwan, Kirsten; Tedstone, Sally; Greene, Giles; Copeland, Lauren; Hunter, Billie; Sanders, Julia; Phillips, Rhiannon; Brown, Amy; Robling, Mike; Paranjothy, Shantini

    2018-01-01

    Peer support is recommended by the World Health Organization for the initiation and continuation of breastfeeding, and this recommendation is included in United Kingdom (U.K.) guidance. There is a lack of information about how, when, and where breastfeeding peer support was provided in the U.K. We aimed to generate an overview of how peer support is delivered in the U.K. and to gain an understanding of challenges for implementation. We surveyed all U.K. infant feeding coordinators (n = 696) who were part of U.K.-based National Infant Feeding Networks, covering 177 National Health Service (NHS) organisations. We received 136 responses (individual response rate 19.5%), covering 102 U.K. NHS organisations (organisational response rate 58%). We also searched NHS organisation websites to obtain data on the presence of breastfeeding peer support. Breastfeeding peer support was available in 56% of areas. However, coverage within areas was variable. The provision of training and ongoing supervision, and peer-supporter roles, varied significantly between services. Around one third of respondents felt that breastfeeding peer-support services were not well integrated with NHS health services. Financial issues were commonly reported to have a negative impact on service provision. One quarter of respondents stated that breastfeeding peer support was not accessed by mothers from poorer social backgrounds. Overall, there was marked variation in the provision of peer-support services for breastfeeding in the U.K. A more robust evidence base is urgently needed to inform guidance on the structure and provision of breastfeeding peer-support services. © 2017 John Wiley & Sons Ltd.

  15. Key Residential Building Equipment Technologies for Control and Grid Support PART I (Residential)

    Energy Technology Data Exchange (ETDEWEB)

    Starke, Michael R [ORNL; Onar, Omer C [ORNL; DeVault, Robert C [ORNL

    2011-09-01

    Electrical energy consumption of the residential sector is a crucial area of research that has in the past primarily focused on increasing the efficiency of household devices such as water heaters, dishwashers, air conditioners, and clothes washer and dryer units. However, the focus of this research is shifting as objectives such as developing the smart grid and ensuring that the power system remains reliable come to the fore, along with the increasing need to reduce energy use and costs. Load research has started to focus on mechanisms to support the power system through demand reduction and/or reliability services. The power system relies on matching generation and load, and day-ahead and real-time energy markets capture most of this need. However, a separate set of grid services exist to address the discrepancies in load and generation arising from contingencies and operational mismatches, and to ensure that the transmission system is available for delivery of power from generation to load. Currently, these grid services are mostly provided by generation resources. The addition of renewable resources with their inherent variability can complicate the issue of power system reliability and lead to the increased need for grid services. Using load as a resource, through demand response programs, can fill the additional need for flexible resources and even reduce costly energy peaks. Loads have been shown to have response that is equal to or better than generation in some cases. Furthermore, price-incentivized demand response programs have been shown to reduce the peak energy requirements, thereby affecting the wholesale market efficiency and overall energy prices. The residential sector is not only the largest consumer of electrical energy in the United States, but also has the highest potential to provide demand reduction and power system support, as technological advancements in load control, sensor technologies, and communication are made. The prevailing loads

  16. Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider

    Science.gov (United States)

    Georgiou, Andrew; Tariq, Amina; Prgomet, Mirela; Warland, Andrew; Armour, Pauline; Westbrook, Johanna I

    2017-01-01

    Introduction: There is limited evidence of the benefits of information and communication technology (ICT) to support integrated aged care services. Objectives: We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Methods: Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Results: Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. Conclusions: There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients. PMID:29042851

  17. Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider.

    Science.gov (United States)

    Douglas, Heather E; Georgiou, Andrew; Tariq, Amina; Prgomet, Mirela; Warland, Andrew; Armour, Pauline; Westbrook, Johanna I

    2017-04-10

    There is limited evidence of the benefits of information and communication technology (ICT) to support integrated aged care services. We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients.

  18. Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider

    Directory of Open Access Journals (Sweden)

    Heather E Douglas

    2017-04-01

    Full Text Available Introduction: There is limited evidence of the benefits of information and communication technology (ICT to support integrated aged care services. Objectives: We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Methods: Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Results: Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. Conclusions: There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients.

  19. Europe, Middle East and North Africa Conference on Technology and Security to Support Learning 2016

    CERN Document Server

    Serrhini, Mohammed; Felgueiras, Carlos

    2017-01-01

    This book contains a selection of articles from The Europe, Middle East and North Africa Conference on Technology and Security to Support Learning 2016 (EMENA-TSSL'16), held between the 3th and 5th of October at Saidia, Oujda, Morocco. EMENA-TSSL'16 is a global forum for researchers and practitioners to present and discuss recent results and innovations, current trends, professional experiences and challenges in Information & Communication Technologies, and Security to support Learning. The main topics covered are: A) Online Education; B) Emerging Technologies in Education; C) Artificial Intelligence in Education; D) Gamification and Serious games; E) Network & Web Technologies Applications; F) Online experimentation and Virtual Laboratories; G) Multimedia Systems and Applications; H) Security and Privacy; I) Multimedia, Computer Vision and Image Processing; J) Cloud, Big Data Analytics and Applications; K) Human-Computer Interaction; L) Software Systems, Architectures, Applications and Tools; M) Onli...

  20. Education and information for practicing school nurses: which technology-supported resources meet their needs?

    Science.gov (United States)

    Anderson, Lori S; Enge, Karmin J

    2012-10-01

    School nurses care for children with a variety of health-related conditions and they need information about managing these conditions, which is accessible, current, and useful. The goal of this literature review was to gather and synthesize information on technology-supported resources and to determine which met the educational needs of school nurses. Successful online educational programs were interactive and self-directed. The most common barriers were lack of time to find educational information, lack of knowledge about computers, technology, the Internet and specific programs, and lack of administrative support from school officials to use technology to access information and evidence for practice. Recommendations for successful use of technology to meet practicing school nurse's educational needs are offered.

  1. The Environment and Support Needs of Japanese Families on Temporary Work Assignments in the United States.

    Science.gov (United States)

    Honda, Junko; Hohashi, Naohiro

    2015-09-01

    This study aimed to describe the environment and the family support needs of families of Japanese nationals rearing children who are temporarily working in the Southwestern United States. Mixed methods were utilized based on the Concentric Sphere Family Environment Model. Data collection occurred over 132 days, with 25 families participating in formal interviews and 40 families completing a written questionnaire survey. "Mutual support from relatives and friends in Japan, and with local Japanese peers," and other themes, six in all, were extracted. Japanese families require intervention for measures related to the global environment in their daily lives. The common factor for those families with high intervention needs was the inability to access family external resources that were usually available in Japan. The building of peer support and intervention to promote their participation in the community are necessary. © The Author(s) 2014.

  2. ICT based technology to support play for children with severe physical disabilities.

    Science.gov (United States)

    van den Heuvel, Renée; Lexis, Monique; de Witte, Luc

    2015-01-01

    Play is important for a child's development. Children with severe physical disabilities experience difficulties engaging in play. With the progress of technology the possibilities to support play are increasing. The purpose of this review was to gain insight into the possibilities and availability of ICT based technology to support play in children with severe physical disabilities. A systematic literature search within the databases PubMed, CINAHL, IEEE and ERIC was carried out. Three reviewers assessed titles and abstracts independently. Additionally, Google Scholar, conference proceedings and reference lists were used. The included publications reported on 27 different technologies, which can be classified into three main groups; robots, virtual reality systems and computer systems. There are several options that may have great potential in supporting play for this target group.

  3. Art-technology Collaboration and Motivation Sources in Technologically Supported Artwork Buildup Project

    Science.gov (United States)

    Happonen, Ari; Stepanov, Alexander; Hirvimäki, Marika; Manninen, Matti; Dennisuk, William; Piili, Heidi; Salminen, Antti

    This study is based on observed outcomes of motivation sources and collaboration elements from a living lab style co-operation project. In this project, researchers of engineering science and an individual artist co-operated closely. The goal was to create an artwork made from corrugated board by utilizing laser cutting technology. In the context of this study, the scientist and the artist participated in the whole process and the research was done in living lab style arrangement. The research process integrated multiple experts from different scientific fields and experts from practical contexts to develop a new art design and art forming process with utilization of laser cutting technology. The purpose of this study was to find out and discuss about the key elements for high motivation to work together and then reveal the best practice findings in this co-operative development process. Elements were studied from three different points of view: artists view, collaboration motivation view and practical cutting point of view. The elements were analysed by utilizing an active documentation collection methodology, during the whole process, and by using story-telling methodology. The documents were used to reflect facts and feelings from the co-operation, the work process and the challenges encountered within collaboration. This article contributes to research methodology and best practice context by revealing the key elements, which build the motivation compelling (as personal inner motivation) the participant to work out of office hours as well as on weekends. Furthermore, as the artist-engineer co-operation is not frequently reported in scientific literature, this study reveals valuable information for practitioners and co-operation researchers.

  4. 77 FR 31026 - Use of Computer Simulation of the United States Blood Supply in Support of Planning for Emergency...

    Science.gov (United States)

    2012-05-24

    ...] Use of Computer Simulation of the United States Blood Supply in Support of Planning for Emergency... entitled: ``Use of Computer Simulation of the United States Blood Supply in Support of Planning for... stakeholders a forum for discussion of data needs and to obtain feedback on possible modeling scenarios to...

  5. Approach to technology prioritization in support of moon initiatives in the framework of ESA exploration technology roadmaps

    Science.gov (United States)

    Aleina, Sara Cresto; Viola, Nicole; Fusaro, Roberta; Saccoccia, Giorgio

    2017-10-01

    Exploration technology roadmaps have been developed by ESA in the past few years and the latest edition has been released in 2015. Scope of these technology roadmaps, elaborated in consultation with the different ESA stakeholders (e.g. European Industries and Research Entities), is to provide a powerful tool for strategic, programmatic and technical decisions in support of the European role within an International Space Exploration context. In the context of preparation for possible future European Moon exploration initiatives, the technology roadmaps have been used to highlight the role of technology within Missions, Building Blocks and Operational Capabilities of relevance. In particular, as part of reference missions to the Moon that would fit in the time frame 2020 to 2030, ESA has addressed the definition of lunar surface exploration missions in line with its space exploration strategy, with the common mission goals of returning samples from the Moon and Mars and expanding human presence to these destinations in a step-wise approach. The roadmaps for the procurement of technologies required for the first mission elements of the above strategy have been elaborated through their main building blocks, i.e. Visual navigation, Hazard detection and avoidance; Sample acquisition, processing and containment system; Surface mobility elements; Tele-robotic and autonomous control systems; and Storable propulsion modules and equipment. Technology prioritization methodologies have been developed in support of the ESA Exploration Technology Roadmaps, in order to provide logical and quantitative instruments to verify choices of prioritization that can be carried out based on important, but non-quantitative factors. These methodologies, which are thoroughly described in the first part of the paper, proceed through subsequent steps. First, technology prioritization's criteria are selected; then decision trees are developed to highlight all feasible paths of combination of

  6. Improving the Reliability of Technological Subsystems Equipment for Steam Turbine Unit in Operation

    Science.gov (United States)

    Brodov, Yu. M.; Murmansky, B. E.; Aronson, R. T.

    2017-11-01

    The authors’ conception is presented of an integrated approach to reliability improving of the steam turbine unit (STU) state along with its implementation examples for the various STU technological subsystems. Basing on the statistical analysis of damage to turbine individual parts and components, on the development and application of modern methods and technologies of repair and on operational monitoring techniques, the critical components and elements of equipment are identified and priorities are proposed for improving the reliability of STU equipment in operation. The research results are presented of the analysis of malfunctions for various STU technological subsystems equipment operating as part of power units and at cross-linked thermal power plants and resulting in turbine unit shutdown (failure). Proposals are formulated and justified for adjustment of maintenance and repair for turbine components and parts, for condenser unit equipment, for regeneration subsystem and oil supply system that permit to increase the operational reliability, to reduce the cost of STU maintenance and repair and to optimize the timing and amount of repairs.

  7. Nurse adoption of continuous patient monitoring on acute post-surgical units: managing technology implementation.

    Science.gov (United States)

    Jeskey, Mary; Card, Elizabeth; Nelson, Donna; Mercaldo, Nathaniel D; Sanders, Neal; Higgins, Michael S; Shi, Yaping; Michaels, Damon; Miller, Anne

    2011-10-01

    To report an exploratory action-research process used during the implementation of continuous patient monitoring in acute post-surgical nursing units. Substantial US Federal funding has been committed to implementing new health care technology, but failure to manage implementation processes may limit successful adoption and the realisation of proposed benefits. Effective approaches for managing barriers to new technology implementation are needed. Continuous patient monitoring was implemented in three of 13 medical/surgical units. An exploratory action-feedback approach, using time-series nurse surveys, was used to identify barriers and develop and evaluate responses. Post-hoc interviews and document analysis were used to describe the change implementation process. Significant differences were identified in night- and dayshift nurses' perceptions of technology benefits. Research nurses' facilitated the change process by evolving 'clinical nurse implementation specialist' expertise. Health information technology (HIT)-related patient outcomes are mediated through nurses' acting on new information but HIT designed for critical care may not transfer to acute care settings. Exploratory action-feedback approaches can assist nurse managers in assessing and mitigating the real-world effects of HIT implementations. It is strongly recommended that nurse managers identify stakeholders and develop comprehensive plans for monitoring the effects of HIT in their units. © 2011 Blackwell Publishing Ltd.

  8. China, the United States, and competition for resources that enable emerging technologies.

    Science.gov (United States)

    Gulley, Andrew L; Nassar, Nedal T; Xun, Sean

    2018-04-02

    Historically, resource conflicts have often centered on fuel minerals (particularly oil). Future resource conflicts may, however, focus more on competition for nonfuel minerals that enable emerging technologies. Whether it is rhenium in jet engines, indium in flat panel displays, or gallium in smart phones, obscure elements empower smarter, smaller, and faster technologies, and nations seek stable supplies of these and other nonfuel minerals for their industries. No nation has all of the resources it needs domestically. International trade may lead to international competition for these resources if supplies are deemed at risk or insufficient to satisfy growing demand, especially for minerals used in technologies important to economic development and national security. Here, we compare the net import reliance of China and the United States to inform mineral resource competition and foreign supply risk. Our analysis indicates that China relies on imports for over half of its consumption for 19 of 42 nonfuel minerals, compared with 24 for the United States-11 of which are common to both. It is for these 11 nonfuel minerals that competition between the United States and China may become the most contentious, especially for those with highly concentrated production that prove irreplaceable in pivotal emerging technologies. Copyright © 2018 the Author(s). Published by PNAS.

  9. China, the United States, and competition for resources that enable emerging technologies

    Science.gov (United States)

    Gulley, Andrew L.; Nassar, Nedal T.; Xun, Sean

    2018-01-01

    Historically, resource conflicts have often centered on fuel minerals (particularly oil). Future resource conflicts may, however, focus more on competition for nonfuel minerals that enable emerging technologies. Whether it is rhenium in jet engines, indium in flat panel displays, or gallium in smart phones, obscure elements empower smarter, smaller, and faster technologies, and nations seek stable supplies of these and other nonfuel minerals for their industries. No nation has all of the resources it needs domestically. International trade may lead to international competition for these resources if supplies are deemed at risk or insufficient to satisfy growing demand, especially for minerals used in technologies important to economic development and national security. Here, we compare the net import reliance of China and the United States to inform mineral resource competition and foreign supply risk. Our analysis indicates that China relies on imports for over half of its consumption for 19 of 42 nonfuel minerals, compared with 24 for the United States—11 of which are common to both. It is for these 11 nonfuel minerals that competition between the United States and China may become the most contentious, especially for those with highly concentrated production that prove irreplaceable in pivotal emerging technologies.

  10. Method of Choosing the Information Technology System Supporting Management of the Military Aircraft Operation

    Directory of Open Access Journals (Sweden)

    Barszcz Piotr

    2014-12-01

    Full Text Available The paper presents a method of choosing the information technology system, the task of which is to support the management process of the military aircraft operation. The proposed method is based on surveys conducted among direct users of IT systems used in aviation of the Polish Armed Forces. The analysis of results of the surveys was conducted using statistical methods. The paper was completed with practical conclusions related to further usefulness of the individual information technology systems. In the future, they can be extremely useful in the process of selecting the best solutions and integration of the information technology systems

  11. Impact of Nuclear Technology to the National Socio-Economy: Technical Support by Nuclear Malaysia

    International Nuclear Information System (INIS)

    Hazmimi Kasim; Ainul Hayati Daud; Jamal Khaer Ibrahim; Alawiah Musa

    2011-01-01

    In Malaysia, the development of nuclear technology began in the year 1972. More than 30 years of application, today, the technology made impact to the national socio-economy through contribution to GDP and; improving quality of life and enhanced societal well-being. The application of nuclear technology both in public and private agencies in industrial, medical and agricultural sectors were considered. In 2008, the impact of nuclear technology shows the contribution of 0.032% to the total GDP. Industry sector shows an increasing trend and is the highest contributor, while agriculture sector remains the lowest. In this regard, Malaysian Nuclear Agency (Nuclear Malaysia) played an important role as a technical support agency in nuclear technology, as a supplier and provider for the service, training and research for the industrial, medical and agricultural sectors. (author)

  12. Operator support system for power unit control in abnormal modes of operation

    International Nuclear Information System (INIS)

    Kurka, J.

    1993-01-01

    I and C system technology, partly Soviet and partly Czechoslovakian, used on the NPP Dukovany units represents the control technology standard of late 70-ties and it becomes the weak part of the whole system. The modernization of the system, therefore, is necessary and it is already in preparation. The specification of both the scope and the depth of upgrading/replacement is being carried out within the framework of the PHARE program. The second phase of the program aimed at the final specifications of requirements on new I and C system is in progress. The output will serve as detailed specification for bid invitation for control system supplier. Parallely, the preparation of specification for WWER-440 full-scope plant simulator for operator training is in progress as well. In the case of two units with WWER-1000 MW reactors, the completion of construction of which was even threaten for a certain period of time, essential changes have taken place in the design of both the I and C systems and the reactor core. 7 figs

  13. Enhancing the ecological and operational characteristics of water treatment units at TPPs based on baromembrane technologies

    Science.gov (United States)

    Chichirova, N. D.; Chichirov, A. A.; Filimonova, A. A.; Saitov, S. R.

    2017-12-01

    The innovative baromembrane technologies for water demineralization were introduced at Russian TPPs more than 25 years ago. While being used in the power engineering industry of Russia, these technologies demonstrated certain advantages over the traditional ion-exchange and thermal technologies of makeup water treatment for steam boilers. Water treatment units based on the baromembrane technology are compact, easy to operate, and highly automated. The experience gained from the use of these units shows that their reliability depends directly on preliminary water treatment. The popular water pretreatment technology with coagulation by aluminum oxychloride proved to be inefficient during the seasonal changes of source water quality that occurs at some stations. The use of aluminum coagulant at pH 8 and higher does not ensure the stable and qualitative pretreatment regime: soluble aluminum forms slip on membranes of the ultrafiltration unit, thereby causing pollution and intoxication as well as leading to structural damages or worsening of mechanical properties of the membranes. The problem of increased pH and seasonal changes of the source water quality can be solved by substitution of the traditional coagulant into a new one. To find the most successful coagulant for water pretreatment, experiments have been performed on both qualitative and quantitative analysis of the content of natural organic matters in the Volga water and their structure. We have developed a software program and measured the concentrations of soluble aluminum and iron salts at different pH values of the source water. The analysis of the obtained results has indicated that iron sulfate at pH 6.0-10.2, in contrast to aluminum oxychloride, is not characterized by increased solubility. Thus, the basic process diagrams of water pretreatment based on baromembrane technologies with pretreatment through coagulation by iron salts and wastewater amount reducing from 60-40 to 5-2% have been introduced for

  14. [Complex technology for water and wastewater disinfection and its industrial realization in prototype unit].

    Science.gov (United States)

    Arakcheev, E N; Brunman, V E; Brunman, M V; Konyashin, A V; Dyachenko, V A; Petkova, A P

    Usage of complex automated electrolysis unit for drinking water disinfection and wastewater oxidation and coagulation is scoped, its ecological and energy efficiency is shown. Properties of technological process of anolyte production using membrane electrolysis of brine for water disinfection in municipal pipelines and potassium ferrate production using electrochemical dissolution of iron anode in NaOH solution for usage in purification plants are listed. Construction of modules of industrial prototype for anolyte and ferrate production and applied aspects of automation of complex electrolysis unit are proved. Results of approbation of electrolytic potassium ferrate for drinking water disinfection and wastewater, rain water and environmental water oxidation and coagulation are shown.

  15. Learning online social support: an investigation of network information technology based on UTAUT.

    Science.gov (United States)

    Lin, Chieh-Peng; Anol, Bhattacherjee

    2008-06-01

    Extending the unified theory of acceptance and use of technology (UTAUT) model, this study postulates a model of online social support. The model is empirically tested using data from undergraduates in Taiwan regarding their usage of instant messaging (IM). The test results indicate that all model paths are significant, except that the path between online social support and facilitating conditions is insignificant. This study offers limitations and implications.

  16. CSIR ScienceScope: Science and technology in support of small, medium and micro enterprises

    CSIR Research Space (South Africa)

    CSIR

    2017-01-01

    Full Text Available generation of small-scale farmers with business savvy 34 Diversifying the product range of the Tshivhase Tea Estate 36 Supporting the creation of substantive township economic activity 38 CSIR technology stimulating the media and broadcast... and natural remedies. The cooperative is supported by the Department of Rural Development and Land Reform, which contracted the CSIR as an implementation agent for the production facility. See articles on page 28-31 44 54 ENTERPRISE AND SUPPLIER...

  17. RE/SPEC Inc. technical support to the Repository Technology Program

    International Nuclear Information System (INIS)

    Wagner, R.A.

    1992-06-01

    This report presents a summary of all RE/SPEC Inc. technical support activities to the Repository Technology Program (RTP) from September 1, 1988, through June 30, 1992. The RE/SPEC Inc. activities are grouped into the following categories: project management, project quality assurance (QA), performance assessment (PA), support of the Office of Civilian Radioactive Waste Management (OCRWM) through technical reviews and general assistance, participation in the Department of Energy (DOE) International Program, and code evaluation and documentation

  18. Airway Inflammation in Chronic Rhinosinusitis with Nasal Polyps and Asthma: The United Airways Concept Further Supported

    DEFF Research Database (Denmark)

    Håkansson, Kåre; Bachert, Claus; Konge, Lars

    2015-01-01

    Background It has been established that patients with chronic rhinosinusitis with nasal polyps (CRSwNP) often have co-existing asthma. Objective We aimed to test two hypotheses: (i) upper and lower airway inflammation in CRSwNP is uniform in agreement with the united airways concept; and (ii......) bronchial inflammation exists in all CRSwNP patients irrespective of clinical asthma status. Methods We collected biopsies from nasal polyps, inferior turbinates and bronchi of 27 CRSwNP patients and 6 controls. All participants were evaluated for lower airway disease according to international guidelines...... cytokines measured, IL-13 was significantly increased in bronchial biopsies from CRSwNP patients with, but not without asthma. Conclusion Our findings support the united airways concept; however, we did not find evidence for subclinical bronchial inflammation in CRSwNP patients without asthma. Finally...

  19. Development of tritium technology for the United States magnetic fusion energy program

    International Nuclear Information System (INIS)

    Anderson, J.L.; Wilkes, W.R.

    1980-01-01

    Tritium technology development for the DOE fusion program is taking place principally at three laboratories, Mound Facility, Argonne National Laboratory and the Los Alamos Scientific Laboratory. This paper will review the major aspects of each of the three programs and look at aspects of the tritium technology being developed at other laboratories within the United States. Facilities and experiments to be discussed include the Tritium Effluent Control Laboratory and the Tritium Storage and Delivery System for the Tokamak Fusion Test Reactor at Mound Facility; the Lithium Processing Test Loop and the solid breeder blanket studies at Argonne; and the Tritium Systems Test Assembly at Los Alamos

  20. Science and Technology for Development in a Postcolonial World. Negotiations at the United Nations, 1960-1980.

    Science.gov (United States)

    Borowy, Iris

    2018-03-01

    Ever since the early 1960s, the United Nations has acknowledged science and technology as integral components of developmental policies. While this connection was initially perceived as the application of findings from scientific research conducted in the Global North, by the 1970s, in the context of negotiations for a New International Economic Order, attention shifted towards the structures of the global management of science. Accordingly in 1979 the UN Conference on Science and Technology for Development discussed possibilities of strengthening scientific and technological research and teaching, particularly in developing countries. During subsequent negotiations conflicts erupted over the question of how to finance programs supporting science. When the G‑77 nations presented plans involving automatic financing schemes, these concepts proved incompatible with the insistence of important industrialized countries that all financial contributions should be voluntary. These discussions appeared to be concerned with the size of financial contributions. In a larger perspective, however, they reflected fundamentally different concepts of a world order, turning science and technology into a medium for far-reaching debates about questions of global development and justice.

  1. The Use Of Feed Technology Of Local Based Source To Support The Productivity Of Beef Cattle In West Sumatra

    Directory of Open Access Journals (Sweden)

    Buharman

    2011-09-01

    Full Text Available The use of feed technology of local based sources to support beef cattle productivity is the key of the successful PSDS/K program in 2014. In 2009, the cattle population in West Sumatra was about 492,272 heads, and the population growth during 2005 – 2009 was about 6.1 percent per year are the growth of cattle slaughtered for local consumption was around 11.0 percent or about 86,028 heads/year. The rate of population growth is much lower than the target of PSDS/K 2014 which around 12.5 percent. The source of feedstuffs come from native grass and by product of agro-industry. These agro-industry by products such as rice, maize, cassava, palm oil, cacao, coffee by products have big potential for feed which account for supporting 1.75 to 2.1 million animal unit. These by-products mostly used for feed supplement by simple process technology. The role of institution like LM3 and SMD can be optimized to support local feed supply which available on location either for local cattle consumption or for commercial use.

  2. United States of America Department of Health and Human Services support for advancing influenza vaccine manufacturing in the developing world.

    Science.gov (United States)

    Perdue, Michael L; Bright, Rick A

    2011-07-01

    Since 2005, the Government of the United States of America has provided more than US$ 50 million to advance influenza vaccine development in low-resourced countries. This programme has provided a unique opportunity for the US Government to develop a comprehensive view of, and to understand better the challenges and future needs for influenza vaccines in the developing world. The funding for this programme has been primarily through a cooperative agreement with the World Health Organization (WHO) to support directly its capacity-building grants to government-owned or -supported vaccine manufacturers in developing countries. A second cooperative agreement with the Program for Appropriate Technologies in Health (PATH) was initiated to accelerate the completion of a current Good Manufacturing Practice cGMP production facility, along with supporting facilities to obtain a reliable source of eggs, and to conduct clinical trials of influenza vaccine manufactured in Vietnam. This mechanism of utilizing cooperative agreements to support capacity-building for vaccine development in low-resourced settings has been novel and unique and has yielded fruitful returns on minimal investment. The information derived from this programme helps to clarify not only the development challenges for influenza vaccines and how the United States may assist in meeting those challenges, but also other vaccine development issues common to manufacturers in developing countries. While building the initial capacity to produce influenza vaccines can be a straightforward exercise, the sustainability of the enterprise and expansion of subsequent markets will be the key to future usefulness. There is hope for expansion of the global influenza vaccine market. Ongoing burden of disease studies are elucidating the impact of influenza infections, particularly in children, and more countries will take note and respond accordingly, since respiratory diseases are now the number one killer of children under

  3. The Combination Design of Enabling Technologies in Group Learning: New Study Support Service for Visually Impaired University Students

    Science.gov (United States)

    Tangsri, Chatcai; Na-Takuatoong, Onjaree; Sophatsathit, Peraphon

    2013-01-01

    This article aims to show how the process of new service technology-based development improves the current study support service for visually impaired university students. Numerous studies have contributed to improving assisted aid technology such as screen readers, the development and the use of audiobooks, and technology that supports individual…

  4. Using mobile health technology to deliver decision support for self-monitoring after lung transplantation.

    Science.gov (United States)

    Jiang, Yun; Sereika, Susan M; DeVito Dabbs, Annette; Handler, Steven M; Schlenk, Elizabeth A

    2016-10-01

    Lung transplant recipients (LTR) experience problems recognizing and reporting critical condition changes during their daily health self-monitoring. Pocket PATH(®), a mobile health application, was designed to provide automatic feedback messages to LTR to guide decisions for detecting and reporting critical values of health indicators. To examine the degree to which LTR followed decision support messages to report recorded critical values, and to explore predictors of appropriately following technology decision support by reporting critical values during the first year after transplantation. A cross-sectional correlational study was conducted to analyze existing data from 96 LTR who used the Pocket PATH for daily health self-monitoring. When a critical value is entered, the device automatically generated a feedback message to guide LTR about when and what to report to their transplant coordinators. Their socio-demographics and clinical characteristics were obtained before discharge. Their use of Pocket PATH for health self-monitoring during 12 months was categorized as low (≤25% of days), moderate (>25% to ≤75% of days), and high (>75% of days) use. Following technology decision support was defined by the total number of critical feedback messages appropriately handled divided by the total number of critical feedback messages generated. This variable was dichotomized by whether or not all (100%) feedback messages were appropriately followed. Binary logistic regression was used to explore predictors of appropriately following decision support. Of the 96 participants, 53 had at least 1 critical feedback message generated during 12 months. Of these 53 participants, the average message response rate was 90% and 33 (62%) followed 100% decision support. LTR who moderately used Pocket PATH (n=23) were less likely to follow technology decision support than the high (odds ratio [OR]=0.11, p=0.02) and low (OR=0.04, p=0.02) use groups. The odds of following decision

  5. GUIDING PRINCIPLES FOR GOOD PRACTICES IN HOSPITAL-BASED HEALTH TECHNOLOGY ASSESSMENT UNITS.

    Science.gov (United States)

    Sampietro-Colom, Laura; Lach, Krzysztof; Pasternack, Iris; Wasserfallen, Jean-Blaise; Cicchetti, Americo; Marchetti, Marco; Kidholm, Kristian; Arentz-Hansen, Helene; Rosenmöller, Magdalene; Wild, Claudia; Kahveci, Rabia; Ulst, Margus

    2015-01-01

    Health technology assessment (HTA) carried out for policy decision making has well-established principles unlike hospital-based HTA (HB-HTA), which differs from the former in the context characteristics and ways of operation. This study proposes principles for good practices in HB-HTA units. A framework for good practice criteria was built inspired by the EFQM excellence business model and information from six literature reviews, 107 face-to-face interviews, forty case studies, large-scale survey, focus group, Delphi survey, as well as local and international validation. In total, 385 people from twenty countries have participated in defining the principles for good practices in HB-HTA units. Fifteen guiding principles for good practices in HB-HTA units are grouped in four dimensions. Dimension 1 deals with principles of the assessment process aimed at providing contextualized information for hospital decision makers. Dimension 2 describes leadership, strategy and partnerships of HB-HTA units which govern and facilitate the assessment process. Dimension 3 focuses on adequate resources that ensure the operation of HB-HTA units. Dimension 4 deals with measuring the short- and long-term impact of the overall performance of HB-HTA units. Finally, nine core guiding principles were selected as essential requirements for HB-HTA units based on the expertise of the HB-HTA units participating in the project. Guiding principles for good practices set up a benchmark for HB-HTA because they represent the ideal performance of HB-HTA units; nevertheless, when performing HTA at hospital level, context also matters; therefore, they should be adapted to ensure their applicability in the local context.

  6. Unattended network operations technology assessment study. Technical support for defining advanced satellite systems concepts

    Science.gov (United States)

    Price, Kent M.; Holdridge, Mark; Odubiyi, Jide; Jaworski, Allan; Morgan, Herbert K.

    1991-01-01

    The results are summarized of an unattended network operations technology assessment study for the Space Exploration Initiative (SEI). The scope of the work included: (1) identified possible enhancements due to the proposed Mars communications network; (2) identified network operations on Mars; (3) performed a technology assessment of possible supporting technologies based on current and future approaches to network operations; and (4) developed a plan for the testing and development of these technologies. The most important results obtained are as follows: (1) addition of a third Mars Relay Satellite (MRS) and MRS cross link capabilities will enhance the network's fault tolerance capabilities through improved connectivity; (2) network functions can be divided into the six basic ISO network functional groups; (3) distributed artificial intelligence technologies will augment more traditional network management technologies to form the technological infrastructure of a virtually unattended network; and (4) a great effort is required to bring the current network technology levels for manned space communications up to the level needed for an automated fault tolerance Mars communications network.

  7. Technology-supported dietary and lifestyle interventions in healthy pregnant women: a systematic review.

    Science.gov (United States)

    O'Brien, O A; McCarthy, M; Gibney, E R; McAuliffe, F M

    2014-07-01

    Overweight and obesity are associated with increased risk of adverse maternal and fetal outcomes. However, the actuality of delivering effective lifestyle interventions in clinical practice is hampered by a high demand for resources. The use of technology to assist lifestyle interventions needs to be explored as a valid method of reducing strain on resources, and enhancing the effectiveness and population reach of interventions. The aim was to systematically review the literature on the use of technology-supported lifestyle interventions for healthy pregnant women and their impact on maternal outcomes. Online databases and registries were searched in March 2013. Primary outcomes of selected English language studies were fasting maternal glucose, incidence of gestational diabetes mellitus (GDM) and maternal gestational weight gain. Secondary outcomes were intervention uptake and acceptance, and dietary or physical activity modification. Studies whose subjects were diagnosed with GDM prior to intervention were excluded. The minimal number of eligible studies and varying outcomes precluded formal meta-analysis of the data. Initially, 203 articles were identified and screened. Seven articles, including five randomised controlled trials, met inclusion criteria for the current review. Results demonstrate several potential benefits associated with technology-supported interventions in pregnancy, despite minimal search results. Although communication technology holds potential as a safe therapeutic tool for the support of lifestyle interventions in pregnancy, there is a paucity of data on its effectiveness. Further RCTs examining the effectiveness of communication technology are required, particularly among those most likely to benefit from lifestyle interventions, such as overweight and obese pregnant women.

  8. Investigations of perspective technologies, equipment and sanitary - hygienic means for Life-Support System of new generation

    Science.gov (United States)

    Shumilina, I. V.

    Creation of optimal sanitary - hygienic conditions allows to keep health and capacity of the crewmembers work at increase of space flight duration. There is a wide application experience of means, methods and equipment for sanitary - hygienic supply, which were developed and experimentally tested for space flights. However, about 800 kg personal hygiene means (napkins and towels are made with water and delivered with the Earth) are necessary for 3 crewmembers per one year. For long orbital and interplanetary flights (without an opportunity of stocks updating) it is necessary to increase a degree of Life-Support System isolation and optimization of goods turnover. Washing combined with water regeneration system is most perspective for sanitary - hygienic procedures. Therefore, creation of space equipment for washing with sanitary - hygienic water (SHW) regeneration system is especially important. The researches have shown, that to processes, which can be applied for SHW regeneration in space conditions and require insignificant quantity of additional materials (as against sorption), concern membrane methods (reverse osmosis, nanofiltration etc.). Two-step membrane unit for SHW regeneration recovered no less than 85 % of permeate with the organic and inorganic selectivity of 82-95 %. The tests of two-step membrane unit for SHW regeneration carried out on mock up solutions and real SHW, containing detergents really used in space flight conditions. The researches on a substantiation of an opportunity of clothing washing, clothing drying and the estimation of an opportunity of application of various detergents for clothing washing are urgent. The tests of water extraction technology from textile materials are carried out. Is established, that at conditional time of contact 1s, humidity of a leaving air flow from clothing drying unit comes nearer to 100 %. It is necessary to solve the problem for creation of Life-Support System of new generation for long-term space

  9. How inverse solver technologies can support die face development and process planning in the automotive industry

    Science.gov (United States)

    Huhn, Stefan; Peeling, Derek; Burkart, Maximilian

    2017-10-01

    With the availability of die face design tools and incremental solver technologies to provide detailed forming feasibility results in a timely fashion, the use of inverse solver technologies and resulting process improvements during the product development process of stamped parts often is underestimated. This paper presents some applications of inverse technologies that are currently used in the automotive industry to streamline the product development process and greatly increase the quality of a developed process and the resulting product. The first focus is on the so-called target strain technology. Application examples will show how inverse forming analysis can be applied to support the process engineer during the development of a die face geometry for Class `A' panels. The drawing process is greatly affected by the die face design and the process designer has to ensure that the resulting drawn panel will meet specific requirements regarding surface quality and a minimum strain distribution to ensure dent resistance. The target strain technology provides almost immediate feedback to the process engineer during the die face design process if a specific change of the die face design will help to achieve these specific requirements or will be counterproductive. The paper will further show how an optimization of the material flow can be achieved through the use of a newly developed technology called Sculptured Die Face (SDF). The die face generation in SDF is more suited to be used in optimization loops than any other conventional die face design technology based on cross section design. A second focus in this paper is on the use of inverse solver technologies for secondary forming operations. The paper will show how the application of inverse technology can be used to accurately and quickly develop trim lines on simple as well as on complex support geometries.

  10. Learning How to Design a Technology Supported Inquiry-Based Learning Environment

    Science.gov (United States)

    Hakverdi-Can, Meral; Sonmez, Duygu

    2012-01-01

    This paper describes a study focusing on pre-service teachers' experience of learning how to design a technology supported inquiry-based learning environment using the Internet. As part of their elective course, pre-service science teachers were asked to develop a WebQuest environment targeting middle school students. A WebQuest is an…

  11. Use of Assistive Technology and Need for Social Support for Elderly With Physical Disabilities

    Directory of Open Access Journals (Sweden)

    Mohammad Taghi Karimian

    2016-12-01

    Discussion: Assistive technologies together with the support of relatives and care services help people to cope with a variety of activities in their daily lives with fewer restrictions. The effectiveness of the aids differs between participants because it depends on several factors such as health, knowledge, and information about aids, as well as the appropriate selection of aids.

  12. Technology-Supported Classroom for Collaborative Learning: Blogging in the Foreign Language Classroom

    Science.gov (United States)

    Domalewska, Dorota

    2014-01-01

    This study examined the phenomenon of blogging as a technologically enhanced support to develop interaction and interrelatedness among learners in a foreign language course. A corpus of 62 blog entries and 30 comments the bloggers left on each other's blogs were analysed to find out whether blog may be used to promote connectivity and…

  13. Financial Support and Challenges for Educational Technology Companies: Then, Now, and Looking Ahead

    Science.gov (United States)

    Billings, Karen J.; Blaschke, Charles L.

    2016-01-01

    The authors review past and current funding/support for U.S. K-12 educational technology companies. They review both who provided the funding for product development and the reasons why. They look back to the 1960s and 1970s, when federal government agencies helped produce computer-based materials, then how the schools' access to technology…

  14. Teachers' Instructional Practices within Connected Classroom Technology Environments to Support Representational Fluency

    Science.gov (United States)

    Gunpinar, Yasemin; Pape, Stephen

    2018-01-01

    The purpose of this study was to investigate the ways that teachers use connected classroom technology (CCT) in conjunction with the Texas Instruments Nspire calculator to potentially support achievement on Algebra problems that require translation between representations (i.e., symbolic to graphical). Four Algebra I classrooms that initially…

  15. Increasing Motivation and Engagement in Elementary and Middle School Students through Technology-Supported Learning Environments

    Science.gov (United States)

    Godzicki, Linda; Godzicki, Nicole; Krofel, Mary; Michaels, Rachel

    2013-01-01

    This action research project report was conducted in order to increase motivation and engagement in elementary and middle school students through technology-supported learning environments. The study was conducted from August 27, 2012, through December 14, 2012 with 116 participating students in first-, fourth-, fifth- and eighth-grade classes. To…

  16. The Role of Computer Technology in Supporting Children's Learning in Jordanian Early Years Education

    Science.gov (United States)

    Alkhawaldeh, Mustafa; Hyassat, Mizyed; Al-Zboon, Eman; Ahmad, Jamal

    2017-01-01

    The current research investigated early years teachers' perspectives regarding the role of computer technology in supporting children's learning in Jordanian kindergartens. Thirty semistructured interviews were conducted with preschool teachers. The sample of kindergartens in this study was purposefully selected from the targeted population of…

  17. Considering Components, Types, and Degrees of Authenticity in Designing Technology to Support Transfer

    Science.gov (United States)

    Hardre, Patricia L.

    2013-01-01

    Authenticity is a key to using technology for instruction in ways that enhance learning and support learning transfer. Simply put, a representation is authentic when it shows learners clearly what a task, context, or experience will be like in real practice. More authentic representations help people learn and understand better. They support…

  18. Evaluating a Technology Supported Interactive Response System during the Laboratory Section of a Histology Course

    Science.gov (United States)

    Rinaldi, Vera D.; Lorr, Nancy A.; Williams, Kimberly

    2017-01-01

    Monitoring of student learning through systematic formative assessment is important for adjusting pedagogical strategies. However, traditional formative assessments, such as quizzes and written assignments, may not be sufficiently timely for making adjustments to a learning process. Technology supported formative assessment tools assess student…

  19. Computer-Supported Co-operative Learning Systems: Interactive Group Technologies and Open Learning.

    Science.gov (United States)

    Davies, Dick

    1988-01-01

    Discussion of interactive technologies and open learning focuses on computer supported cooperative work (CSCW), especially computer based message systems, and their effects on open learning. Topics discussed include cooperative learning; distance learning; individualized instruction; local area networks; group communication; and design principles…

  20. Inclusive design and anthropological methods to create technological support for societal inclusion

    NARCIS (Netherlands)

    Cremers, A.H.M.; Jansen, Y.J.F.M.; Neerincx, M.A.; Schouten, D.; Kayal, A.

    2014-01-01

    Large groups in society lack the necessary skills to be sufficiently self-reliant and are in need of personal assistance. They include ageing people, people with low literacy skills, non-natives, but also children. They could all be supported by information and communication technology (ICT), but

  1. Students' Views about the Problem Based Collaborative Learning Environment Supported by Dynamic Web Technologies

    Science.gov (United States)

    Ünal, Erhan; Çakir, Hasan

    2017-01-01

    The purpose of this study was to design a problem based collaborative learning environment supported by dynamic web technologies and to examine students' views about this learning environment. The study was designed as a qualitative research. Some 36 students who took an Object Oriented Programming I-II course at the department of computer…

  2. The Case for Using SMS Technologies to Support Distance Education Students in South Africa: Conversations

    Science.gov (United States)

    Viljoen, Jeanne-Marie; Du Preez, Carl; Cook, Antoinette

    2005-01-01

    The rate of adoption of mobile technologies in Africa's developing countries is amongst the highest in the world and by 2005 there may be almost 100 billion mobile users in Africa (Keegan, 2002; Brown, 2005). This is just one of the reasons why servicing distance students in this country through m-learning support tools should enjoy…

  3. Assessing the Suitability of Process and Information Technology in Supporting Tacit Knowledge Transfer

    Science.gov (United States)

    Wu, Chien-Hsing; Kao, Shu-Chen; Shih, Lan-Hsin

    2010-01-01

    The transfer of tacit knowledge, one of the most important issues in the knowledge sharing context, needs a multi-dimensional perception in its process. Information technology's (IT) supporting role has already been addressed in the process of tacit knowledge transfer. However, IT has its own characteristics, and in turn, may have dissimilar…

  4. Effects of a Physical Education Supportive Curriculum and Technological Devices on Physical Activity

    Science.gov (United States)

    Clapham, Emily Dean; Sullivan, Eileen C.; Ciccomascolo, Lori E.

    2015-01-01

    The purpose of this study was to examine the effects of a physical education supportive curriculum and technological devices, heart rate monitor (HRM) and pedometer (PED), on physical activity. A single-subject ABAB research design was used to examine amount and level of participation in physical activity among 106 suburban fourth and fifth…

  5. Technologies and spatial data for modern land governance. Tools to support the cadastral reform

    Directory of Open Access Journals (Sweden)

    Flavio Celestino Ferrante

    2013-12-01

    Full Text Available This article outlines the methods and activities, in the field of mapping, in support of the important process of renewal of the entire cadastral system. It describes the technology and spatial data currently available that can assist in setting up complex issues of reforming appraisal system and, more generally, in the processes against tax evasion in real estate.

  6. Trends in Facility Management Technology: The Emergence of the Internet, GIS, and Facility Assessment Decision Support.

    Science.gov (United States)

    Teicholz, Eric

    1997-01-01

    Reports research on trends in computer-aided facilities management using the Internet and geographic information system (GIS) technology for space utilization research. Proposes that facility assessment software holds promise for supporting facility management decision making, and outlines four areas for its use: inventory; evaluation; reporting;…

  7. Support systems for the diffusion of renewable energy technologies - an investor perspective

    NARCIS (Netherlands)

    Dinica, V.

    2006-01-01

    Concern over climate change impacts and the projected depletion of fossil fuels has urged more governments to adopt policies that stimulate the diffusion of renewable energy technologies (RET). With an increasingly diverse suite of support instruments, the question emerges as to which instruments or

  8. Technology to Support Parental Engagement in Elementary Education: Lessons Learned from the UK

    Science.gov (United States)

    Lewin, Cathy; Luckin, Rosemary

    2010-01-01

    This paper compares and contrasts two projects in order to better understand the complex issues surrounding the use of technology to support parental involvement with schools and their children's learning. The Becta-funded ICT Test Bed evaluation (2002-2006) had the intention of saturating schools (in three areas of social deprivation) with a…

  9. Capitalizing on Mobile Technology to Support Healthy Eating in Ethnic Minority College Students

    Science.gov (United States)

    Rodgers, Rachel F.; Pernal, Wendy; Matsumoto, Atsushi; Shiyko, Mariya; Intille, Stephen; Franko, Debra L.

    2016-01-01

    Objective: To evaluate the capacity of a mobile technology-based intervention to support healthy eating among ethnic minority female students. Participants: Forty-three African American and Hispanic female students participated in a 3-week intervention between January and May 2013. Methods: Participants photographed their meals using their smart…

  10. Proceedings of the 1st Workshop on Technology Support for Self-Organized Learners

    NARCIS (Netherlands)

    Kalz, Marco; Koper, Rob; Hornung-Prähauser, Veronika; Luckmann, Michaela

    2008-01-01

    Kalz, M., Koper, R., Hornung-Prähauser, V., & Luckmann, M. (Eds.) (2008). Proceedings of the 1st Workshop on Technology Support for Self-Organized Learners. June, 2-3, 2008, Salzburg, Austria: CEUR Workshop Proceedings, ISSN 1613-0073. Available at http://ceur-ws.org/Vol-349.

  11. Healthcare professional behaviour change using technological supports: A realist literature review

    Directory of Open Access Journals (Sweden)

    Chris Keyworth

    2015-10-01

    Technological supports aiming to change the behaviour of healthcare professionals show considerable promise, particularly those involving computer-generated reminders and feedback. Due to the lack of theoretically-informed interventions, we were unable to draw conclusions around the effectiveness of theory-behaviour change interventions in this context. Interventions currently lack consistency in delivery method and content, which future research should address.

  12. Regional Centres for Space Science and Technology Education Affiliated to the United Nations

    Science.gov (United States)

    Aquino, A. J. A.; Haubold, H. J.

    2010-05-01

    Based on resolutions of the United Nations General Assembly, Regional Centres for space science and technology education were established in India, Morocco, Nigeria, Brazil and Mexico. Simultaneously, education curricula were developed for the core disciplines of remote sensing, satellite communications, satellite meteorology, and space and atmospheric science. This paper provides a brief report on the status of the operation of the Regional Centres and draws attention to their educational activities.

  13. Decentralized control of units in smart grids for the support of renewable energy supply

    Energy Technology Data Exchange (ETDEWEB)

    Sonnenschein, Michael, E-mail: Michael.Sonnenschein@Uni-Oldenburg.DE [University of Oldenburg, Department of Computing Science, D-26111 Oldenburg (Germany); Lünsdorf, Ontje, E-mail: Ontje.Luensdorf@OFFIS.DE [OFFIS Institute for Information Technology, Escherweg 2, D-26121 Oldenburg (Germany); Bremer, Jörg, E-mail: Joerg.Bremer@Uni-Oldenburg.DE [University of Oldenburg, Department of Computing Science, D-26111 Oldenburg (Germany); Tröschel, Martin, E-mail: Martin.Troeschel@OFFIS.DE [OFFIS Institute for Information Technology, Escherweg 2, D-26121 Oldenburg (Germany)

    2015-04-15

    Due to the significant environmental impact of power production from fossil fuels and nuclear fission, future energy systems will increasingly rely on distributed and renewable energy sources (RES). The electrical feed-in from photovoltaic (PV) systems and wind energy converters (WEC) varies greatly both over short and long time periods (from minutes to seasons), and (not only) by this effect the supply of electrical power from RES and the demand for electrical power are not per se matching. In addition, with a growing share of generation capacity especially in distribution grids, the top-down paradigm of electricity distribution is gradually replaced by a bottom-up power supply. This altogether leads to new problems regarding the safe and reliable operation of power grids. In order to address these challenges, the notion of Smart Grids has been introduced. The inherent flexibilities, i.e. the set of feasible power schedules, of distributed power units have to be controlled in order to support demand–supply matching as well as stable grid operation. Controllable power units are e.g. combined heat and power plants, power storage systems such as batteries, and flexible power consumers such as heat pumps. By controlling the flexibilities of these units we are particularly able to optimize the local utilization of RES feed-in in a given power grid by integrating both supply and demand management measures with special respect to the electrical infrastructure. In this context, decentralized systems, autonomous agents and the concept of self-organizing systems will become key elements of the ICT based control of power units. In this contribution, we first show how a decentralized load management system for battery charging/discharging of electrical vehicles (EVs) can increase the locally used share of supply from PV systems in a low voltage grid. For a reliable demand side management of large sets of appliances, dynamic clustering of these appliances into uniformly

  14. Decentralized control of units in smart grids for the support of renewable energy supply

    International Nuclear Information System (INIS)

    Sonnenschein, Michael; Lünsdorf, Ontje; Bremer, Jörg; Tröschel, Martin

    2015-01-01

    Due to the significant environmental impact of power production from fossil fuels and nuclear fission, future energy systems will increasingly rely on distributed and renewable energy sources (RES). The electrical feed-in from photovoltaic (PV) systems and wind energy converters (WEC) varies greatly both over short and long time periods (from minutes to seasons), and (not only) by this effect the supply of electrical power from RES and the demand for electrical power are not per se matching. In addition, with a growing share of generation capacity especially in distribution grids, the top-down paradigm of electricity distribution is gradually replaced by a bottom-up power supply. This altogether leads to new problems regarding the safe and reliable operation of power grids. In order to address these challenges, the notion of Smart Grids has been introduced. The inherent flexibilities, i.e. the set of feasible power schedules, of distributed power units have to be controlled in order to support demand–supply matching as well as stable grid operation. Controllable power units are e.g. combined heat and power plants, power storage systems such as batteries, and flexible power consumers such as heat pumps. By controlling the flexibilities of these units we are particularly able to optimize the local utilization of RES feed-in in a given power grid by integrating both supply and demand management measures with special respect to the electrical infrastructure. In this context, decentralized systems, autonomous agents and the concept of self-organizing systems will become key elements of the ICT based control of power units. In this contribution, we first show how a decentralized load management system for battery charging/discharging of electrical vehicles (EVs) can increase the locally used share of supply from PV systems in a low voltage grid. For a reliable demand side management of large sets of appliances, dynamic clustering of these appliances into uniformly

  15. PSS Support for Maritime Technology Ventures: From Exploration to Methodology and Theory

    DEFF Research Database (Denmark)

    Andersen, Jakob Axel Bejbro

    to validate an existing theory for entrepreneurship process against the data. This study fails to find proof for or against the assertions of the theory. In the last study, a grounded theory approach is used for building a conceptual framework for entrepreneurship processes. As such, the framework is entirely......, the new context is found to pose a challenge to the tools, which need to be adapted and given new roles in order to support technology venturing. In closing the thesis, the potential for research and practice synergies at the overlap between PSS, technology and entrepreneurship processes is discussed...... the appropriateness of PSS support can be established, the phenomenon of technology entrepreneurship processes has to be understood. To build this understanding, the research areas dealing with the phenomenon are explored and an empirical study is conducted. The exploration of the entrepreneurship and engineering...

  16. The Impact of a Geospatial Technology-Supported Energy Curriculum on Middle School Students' Science Achievement

    Science.gov (United States)

    Kulo, Violet; Bodzin, Alec

    2013-02-01

    Geospatial technologies are increasingly being integrated in science classrooms to foster learning. This study examined whether a Web-enhanced science inquiry curriculum supported by geospatial technologies promoted urban middle school students' understanding of energy concepts. The participants included one science teacher and 108 eighth-grade students classified in three ability level tracks. Data were gathered through pre/posttest content knowledge assessments, daily classroom observations, and daily reflective meetings with the teacher. Findings indicated a significant increase in the energy content knowledge for all the students. Effect sizes were large for all three ability level tracks, with the middle and low track classes having larger effect sizes than the upper track class. Learners in all three tracks were highly engaged with the curriculum. Curriculum effectiveness and practical issues involved with using geospatial technologies to support science learning are discussed.

  17. Hybrid vehicle turbine engine technology support (HVTE-TS) project. 1995--1996 annual report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    This report presents a summary of technical work accomplished on the Hybrid Vehicle Turbine Engine--Technology Support (HVTE-TS) Project during calendar years 1995 and 1996. Work was performed under an initial National Aeronautics and Space Administration (NASA) contract DEN3-336. As of September 1996 the contract administration was transferred to the US Department of Energy (DoE) Chicago Operations Office, and renumbered as DE-AC02-96EE50553. The purpose of the HVTE-TS program is to develop gas turbine engine technology in support of DoE and automotive industry programs exploring the use of gas turbine generator sets in hybrid-electric automotive propulsion systems. The program focus is directed to the development of four key technologies to be applied to advanced turbogenerators for hybrid vehicles: Structural ceramic materials and processes; Low emissions combustion systems; Regenerators and seals systems; and Insulation systems and processes. 60 figs., 9 tabs.

  18. R&D to Market Success: BTO-Supported Technologies Commercialized from 2010-2015

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2017-04-01

    Technology commercialization plays an essential role in almost every facet of the U.S. economy. It spurs private sector funding that supports innovative breakthroughs, drives growth through increased productivity and product development, increases American competitiveness, and creates domestic jobs. The BTO Technology Commercialization report is an annual publication offering the latest information on successfully commercialized technologies resulting in part from BTO’s research partnerships. This report defines a “commercialized technology” as a process, technique, design, machine, tool, material, or software that was developed with funds provided at least in part by BTO, and that has resulted in domestic sales or is in use in the U.S. This definition also applies to open-source software products developed with support from BTO, all of which are currently distributed freely but are actively used for commercial purposes.

  19. DJINNI: A Novel Technology Supported Exposure Therapy Paradigm for SAD Combining Virtual Reality and Augmented Reality

    Science.gov (United States)

    Ben-Moussa, Maher; Rubo, Marius; Debracque, Coralie; Lange, Wolf-Gero

    2017-01-01

    The present paper explores the benefits and the capabilities of various emerging state-of-the-art interactive 3D and Internet of Things technologies and investigates how these technologies can be exploited to develop a more effective technology supported exposure therapy solution for social anxiety disorder. “DJINNI” is a conceptual design of an in vivo augmented reality (AR) exposure therapy mobile support system that exploits several capturing technologies and integrates the patient’s state and situation by vision-based, audio-based, and physiology-based analysis as well as by indoor/outdoor localization techniques. DJINNI also comprises an innovative virtual reality exposure therapy system that is adaptive and customizable to the demands of the in vivo experience and therapeutic progress. DJINNI follows a gamification approach where rewards and achievements are utilized to motivate the patient to progress in her/his treatment. The current paper reviews the state of the art of technologies needed for such a solution and recommends how these technologies could be integrated in the development of an individually tailored and yet feasible and effective AR/virtual reality-based exposure therapy. Finally, the paper outlines how DJINNI could be part of classical cognitive behavioral treatment and how to validate such a setup. PMID:28503155

  20. DJINNI: A Novel Technology Supported Exposure Therapy Paradigm for SAD Combining Virtual Reality and Augmented Reality

    Directory of Open Access Journals (Sweden)

    Maher Ben-Moussa

    2017-04-01

    Full Text Available The present paper explores the benefits and the capabilities of various emerging state-of-the-art interactive 3D and Internet of Things technologies and investigates how these technologies can be exploited to develop a more effective technology supported exposure therapy solution for social anxiety disorder. “DJINNI” is a conceptual design of an in vivo augmented reality (AR exposure therapy mobile support system that exploits several capturing technologies and integrates the patient’s state and situation by vision-based, audio-based, and physiology-based analysis as well as by indoor/outdoor localization techniques. DJINNI also comprises an innovative virtual reality exposure therapy system that is adaptive and customizable to the demands of the in vivo experience and therapeutic progress. DJINNI follows a gamification approach where rewards and achievements are utilized to motivate the patient to progress in her/his treatment. The current paper reviews the state of the art of technologies needed for such a solution and recommends how these technologies could be integrated in the development of an individually tailored and yet feasible and effective AR/virtual reality-based exposure therapy. Finally, the paper outlines how DJINNI could be part of classical cognitive behavioral treatment and how to validate such a setup.

  1. The Effectiveness of Technology-Supported Exercise Therapy for Low Back Pain: A Systematic Review.

    Science.gov (United States)

    Matheve, Thomas; Brumagne, Simon; Timmermans, Annick A A

    2017-05-01

    Various technological systems have been developed to assist exercise therapy for low back pain. The aim of this systematic review was to provide an overview and to assess the effectiveness of the available technology-supported exercise therapy (TSET) programs for low back pain. The electronic databases Pubmed, Embase, Cochrane Central Register of Controlled Trials, PEDro, IEEE, and ACM were searched until January 2016. Randomized controlled trials (RCTs) using electronic technological systems simultaneously with exercise therapy for patients with low back pain were included. Twenty-five RCTs met the inclusion criteria. Seventeen studies involved patients with chronic low back pain, and electromyography biofeedback was the most prevalent type of technological support. This review shows that TSET seems to improve pain, disability, and quality of life for patients with low back pain, and that a standard treatment combined with an additional TSET program might be superior to a standard treatment alone. However, TSET seems not more effective compared to other interventions or a placebo intervention for improving these outcomes, which may partially be explained by the analytical approach of the current TSET-programs. For most technologies, only a limited number of RCTs are available, making it difficult to draw firm conclusions about the effectiveness of individual technological systems.

  2. DJINNI: A Novel Technology Supported Exposure Therapy Paradigm for SAD Combining Virtual Reality and Augmented Reality.

    Science.gov (United States)

    Ben-Moussa, Maher; Rubo, Marius; Debracque, Coralie; Lange, Wolf-Gero

    2017-01-01

    The present paper explores the benefits and the capabilities of various emerging state-of-the-art interactive 3D and Internet of Things technologies and investigates how these technologies can be exploited to develop a more effective technology supported exposure therapy solution for social anxiety disorder. "DJINNI" is a conceptual design of an in vivo augmented reality (AR) exposure therapy mobile support system that exploits several capturing technologies and integrates the patient's state and situation by vision-based, audio-based, and physiology-based analysis as well as by indoor/outdoor localization techniques. DJINNI also comprises an innovative virtual reality exposure therapy system that is adaptive and customizable to the demands of the in vivo experience and therapeutic progress. DJINNI follows a gamification approach where rewards and achievements are utilized to motivate the patient to progress in her/his treatment. The current paper reviews the state of the art of technologies needed for such a solution and recommends how these technologies could be integrated in the development of an individually tailored and yet feasible and effective AR/virtual reality-based exposure therapy. Finally, the paper outlines how DJINNI could be part of classical cognitive behavioral treatment and how to validate such a setup.

  3. Regional characteristics of individual housing units in Serbia from the aspect of applied building technologies

    Directory of Open Access Journals (Sweden)

    Jovanović-Popović Milica

    2014-01-01

    Full Text Available Individual housing units in Serbia have been studied from the aspect of applied technical solutions. Analyzed data have been collected during a field research in accordance with the current administrative regional division, and they represent a basis for definition of regional typology of individual housing units. Characteristic types of objects of each region’s typology have been further analyzed. Upon these analyses regional characteristics of individual housing units regarding applied construction types, building technologies and materials have been defined and presented. [Projekat Ministarstva nauke Republike Srbije, br. TR 36034: Investigation and Systematization of Serbian Housing in Context of Globalization and European Integration in the Framework of Quality and Living-Standard Improvement

  4. Technology as Teammate: Examining the Role of External Cognition in Support of Team Cognitive Processes.

    Science.gov (United States)

    Fiore, Stephen M; Wiltshire, Travis J

    2016-01-01

    In this paper we advance team theory by describing how cognition occurs across the distribution of members and the artifacts and technology that support their efforts. We draw from complementary theorizing coming out of cognitive engineering and cognitive science that views forms of cognition as external and extended and integrate this with theorizing on macrocognition in teams. Two frameworks are described that provide the groundwork for advancing theory and aid in the development of more precise measures for understanding team cognition via focus on artifacts and the technologies supporting their development and use. This includes distinctions between teamwork and taskwork and the notion of general and specific competencies from the organizational sciences along with the concepts of offloading and scaffolding from the cognitive sciences. This paper contributes to the team cognition literature along multiple lines. First, it aids theory development by synthesizing a broad set of perspectives on the varied forms of cognition emerging in complex collaborative contexts. Second, it supports research by providing diagnostic guidelines to study how artifacts are related to team cognition. Finally, it supports information systems designers by more precisely describing how to conceptualize team-supporting technology and artifacts. As such, it provides a means to more richly understand process and performance as it occurs within sociotechnical systems. Our overarching objective is to show how team cognition can both be more clearly conceptualized and more precisely measured by integrating theory from cognitive engineering and the cognitive and organizational sciences.

  5. The "T3 Support Centre" (Teaching, Technology and Testing - Not just another help desk

    Directory of Open Access Journals (Sweden)

    Carol Miles

    2005-10-01

    Full Text Available Many faculty members embrace the challenge of responding to rising student demands for more technically advanced course supports by offering their courseware through a variety of media. However, it is often difficult for them to find the time required to become proficient in the use of the software packages, course management systems and web technologies at their disposal. These new realities of teaching point to the need for support systems for faculty members that go beyond the traditional computer services "help desk" with a more comprehensive support service that actually becomes involved in the development and modification of technology-based course materials and computerized test marking and analysis. Increasing demand for these types of services at Carleton University resulted in the establishment of the T3 (Teaching...Technology...Testing Support Centre. The service offers faculty members extended-hour phone-in and walk-in support as well as a variety of resources such as Scantron and Item Analysis service for multiple choice exams, the use of scanners and colour printers, as well as a variety of teaching publications and contacts. This paper details the planning, administration, and services offered of the T3 Service, including advice those attempting to establish a similar service. Usage statistics from the first year of operations will be delineated.

  6. ALTERNATIVE REMEDIATION TECHNOLOGY STUDY FOR GROUNDWATER TREATMENT AT 200-PO-1 OPERABLE UNIT AT HANFORD SITE

    Energy Technology Data Exchange (ETDEWEB)

    DADO MA

    2008-07-31

    This study focuses on the remediation methods and technologies applicable for use at 200-PO-I Groundwater Operable Unit (OU) at the Hanford Site. The 200-PO-I Groundwater au requires groundwater remediation because of the existence of contaminants of potential concern (COPC). A screening was conducted on alternative technologies and methods of remediation to determine which show the most potential for remediation of groundwater contaminants. The possible technologies were screened to determine which would be suggested for further study and which were not applicable for groundwater remediation. COPCs determined by the Hanford Site groundwater monitoring were grouped into categories based on properties linking them by remediation methods applicable to each COPC group. The screening considered the following criteria. (1) Determine if the suggested method or technology can be used for the specific contaminants found in groundwater and if the technology can be applied at the 200-PO-I Groundwater au, based on physical characteristics such as geology and depth to groundwater. (2) Evaluate screened technologies based on testing and development stages, effectiveness, implementability, cost, and time. This report documents the results of an intern research project conducted by Mathew Dado for Central Plateau Remediation in the Soil and Groundwater Remediation Project. The study was conducted under the technical supervision of Gloria Cummins and management supervision of Theresa Bergman and Becky Austin.

  7. Middle School Mathematics Teachers' Experiences with School-Based and District-Based Support and Its Relationship to Integrating Technology

    Science.gov (United States)

    Hampshire, Onequa N.

    2014-01-01

    Technological advances play a major role in educating students' in mathematics. Research indicates that technology could create learning environments that support innovativeness and assist teachers in developing a positive attitude toward integrating technology. Unfortunately, teachers are not utilizing technology on a regular basis in mathematics…

  8. Home and Away: The Use of Institutional and Non-Institutional Technologies to Support Learning and Teaching

    Science.gov (United States)

    Flavin, Michael

    2016-01-01

    This paper examines the usage of institutional and non-institutional technologies to support learning and teaching in UK higher education. Previous work on disruptive technology and disruptive innovation has argued that users prefer simple and convenient technologies, and often repurpose technologies from designers' intentions; this paper…

  9. A Self-Assessment Framework for Inclusive Schools Supporting Assistive Technology Users.

    Science.gov (United States)

    Hoogerwerf, Evert-Jan; Solander-Gross, Andrea; Mavrou, Katerina; Traina, Ivan; Hersh, Marion

    2017-01-01

    In order to support schools to assess their performance in supporting children with disabilities in their ICT and ICT-AT needs, a self-assessment framework was developed by a task force of partners and associate partners of the ENTELIS project. The self-assessment tool aims to help educational establishments that welcome learners with disabilities to assess their current outcomes and to plan improvements in supporting these students in increasing digital literacy and developing digital skills. This includes the use of mainstream Information and Communication Technology (ICT) and specially designed digital Assistive Technologies (ICT-AT). This can only successfully happen if schools fully embrace an inclusive approach to education. In this paper the authors describe the development of the framework and the further steps for its use.

  10. UNITED STATES DEPARTMENT OF ENERGY OFFICE OF ENVIRONMENTAL MANAGEMENT WASTE PROCESSING ANNUAL TECHNOLOGY DEVELOPMENT REPORT 2008

    Energy Technology Data Exchange (ETDEWEB)

    Bush, S.

    2009-11-05

    The Office of Waste Processing identifies and reduces engineering and technical risks and uncertainties of the waste processing programs and projects of the Department of Energy's Environmental Management (EM) mission through the timely development of solutions to technical issues. The risks, and actions taken to mitigate those risks, are determined through technology readiness assessments, program reviews, technology information exchanges, external technical reviews, technical assistance, and targeted technology development and deployment. The Office of Waste Processing works with other DOE Headquarters offices and project and field organizations to proactively evaluate technical needs, identify multi-site solutions, and improve the technology and engineering associated with project and contract management. Participants in this program are empowered with the authority, resources, and training to implement their defined priorities, roles, and responsibilities. The Office of Waste Processing Multi-Year Program Plan (MYPP) supports the goals and objectives of the U.S. Department of Energy (DOE) - Office of Environmental Management Engineering and Technology Roadmap by providing direction for technology enhancement, development, and demonstration that will lead to a reduction of technical risks and uncertainties in EM waste processing activities. The MYPP summarizes the program areas and the scope of activities within each program area proposed for the next five years to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. Waste Processing Program activities within the Roadmap and the MYPP are described in these seven program areas: (1) Improved Waste Storage Technology; (2) Reliable and Efficient Waste Retrieval Technologies; (3) Enhanced Tank Closure Processes; (4) Next-Generation Pretreatment Solutions; (5

  11. United States Department Of Energy Office Of Environmental Management Waste Processing Annual Technology Development Report 2008

    International Nuclear Information System (INIS)

    Bush, S.

    2009-01-01

    The Office of Waste Processing identifies and reduces engineering and technical risks and uncertainties of the waste processing programs and projects of the Department of Energy's Environmental Management (EM) mission through the timely development of solutions to technical issues. The risks, and actions taken to mitigate those risks, are determined through technology readiness assessments, program reviews, technology information exchanges, external technical reviews, technical assistance, and targeted technology development and deployment. The Office of Waste Processing works with other DOE Headquarters offices and project and field organizations to proactively evaluate technical needs, identify multi-site solutions, and improve the technology and engineering associated with project and contract management. Participants in this program are empowered with the authority, resources, and training to implement their defined priorities, roles, and responsibilities. The Office of Waste Processing Multi-Year Program Plan (MYPP) supports the goals and objectives of the U.S. Department of Energy (DOE) - Office of Environmental Management Engineering and Technology Roadmap by providing direction for technology enhancement, development, and demonstration that will lead to a reduction of technical risks and uncertainties in EM waste processing activities. The MYPP summarizes the program areas and the scope of activities within each program area proposed for the next five years to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. Waste Processing Program activities within the Roadmap and the MYPP are described in these seven program areas: (1) Improved Waste Storage Technology; (2) Reliable and Efficient Waste Retrieval Technologies; (3) Enhanced Tank Closure Processes; (4) Next-Generation Pretreatment Solutions; (5

  12. Effect of problem solving support and cognitive style on idea generation: Implications for Technology-Enhanced-Learning

    OpenAIRE

    Stoyanov, Slavi; Kirschner, Paul A.

    2008-01-01

    Stoyanov, S., & Kirschner, P. (2007). Effect of problem solving support and cognitive style on idea generation: Implications for Technology-Enhanced-Learning. Journal of Research on Technology in Education, 40(1), 49-63.

  13. Life support technology investment strategies for flight programs: An application of decision analysis

    Science.gov (United States)

    Schlater, Nelson J.; Simonds, Charles H.; Ballin, Mark G.

    1993-01-01

    Applied research and technology development (R&TD) is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Given the increased awareness of limitations in resources, effective R&TD today needs a method for up-front assessment of competing technologies to help guide technology investment decisions. Such an assessment approach must account for uncertainties in system performance parameters, mission requirements and architectures, and internal and external events influencing a development program. The methodology known as decision analysis has the potential to address these issues. It was evaluated by performing a case study assessment of alternative carbon dioxide removal technologies for NASA's proposed First Lunar Outpost program. An approach was developed that accounts for the uncertainties in each technology's cost and performance parameters as well as programmatic uncertainties such as mission architecture. Life cycle cost savings relative to a baseline, adjusted for the cost of money, was used as a figure of merit to evaluate each of the alternative carbon dioxide removal technology candidates. The methodology was found to provide a consistent decision-making strategy for development of new life support technology. The case study results provided insight that was not possible from more traditional analysis approaches.

  14. Decision Support Model for Selection Technologies in Processing of Palm Oil Industrial Liquid Waste

    Science.gov (United States)

    Ishak, Aulia; Ali, Amir Yazid bin

    2017-12-01

    The palm oil industry continues to grow from year to year. Processing of the palm oil industry into crude palm oil (CPO) and palm kernel oil (PKO). The ratio of the amount of oil produced by both products is 30% of the raw material. This means that 70% is palm oil waste. The amount of palm oil waste will increase in line with the development of the palm oil industry. The amount of waste generated by the palm oil industry if it is not handled properly and effectively will contribute significantly to environmental damage. Industrial activities ranging from raw materials to produce products will disrupt the lives of people around the factory. There are many alternative technologies available to process other industries, but problems that often occur are difficult to implement the most appropriate technology. The purpose of this research is to develop a database of waste processing technology, looking for qualitative and quantitative criteria to select technology and develop Decision Support System (DSS) that can help make decisions. The method used to achieve the objective of this research is to develop a questionnaire to identify waste processing technology and develop the questionnaire to find appropriate database technology. Methods of data analysis performed on the system by using Analytic Hierarchy Process (AHP) and to build the model by using the MySQL Software that can be used as a tool in the evaluation and selection of palm oil mill processing technology.

  15. [Utilization of technological resources within the framework of operation of a Mobile Mental Health Unit].

    Science.gov (United States)

    Garoni, D; Sarantidis, D; Katsadoros, K

    2016-01-01

    Telepsychiatry was introduced in the early 1950's for the provision of mental health services from a distance. In 1990 the progress made in telecommunications technologies caused a significant expansion in telepsychiatry services. It can refer to store and forward technologies, interactive technologies, remote monitoring technologies and it is applied to contribute to the lift of restrictions placed on providing mental health services. Restrictions may exist due to geographic isolation, lack of specialized services, high cost of moving patients etc. The positive cost-benefit analysis and the reliability of diagnosis and efficacy of interventions through telepsychiatry have been documented in various research papers referring to a wide range of contexts such as prisons, remote areas, general and psychiatric hospitals. Since 2003 the Mobile Mental Health Unit of South- Eastern (SE) Cyclades has been using videoconferencing in order to provide mental health services in thirteen islands. This area shares many of the characteristics of remote areas such as residential dispersion, lack of mental health services and frequent lack of access to services in urban centers. Telepsychiatry in conjunction with physical presence of professionals was launched by the Mobile Mental Health Unit in order to provide assistance to the evaluation of patients, to therapeutic interventions, to medicine prescription, to crisis intervention, to psychoeducation of patients and their families and to the implementation of educational and administrative activities . The use of existing technology in combination with the development of human resources has enabled continuity of care, crisis intervention and avoidance of involuntary hospitalization for a significant number of persons. Moreover, it has improved cooperation and coordination between the interdisciplinary team and local authorities and agencies. When professionals located in different parts are collaborating via telepsychiatry it is

  16. Renewable energies in the United States: support policies and tendencies for research and development

    International Nuclear Information System (INIS)

    2009-11-01

    Illustrated by figures, graphs and tables of data, nine articles give overviews of the present evolutions and tendencies for research and development in the energy sector in the United States of America. After a first article commenting the possible evolution of the energy model in this country, the authors are commenting the priority given to innovation for clean energies, the evolution of patents claimed by US companies, the smart-grid-based energy strategy, the evolution of the wind energy sector, the technological evolutions and decreasing prices of the solar energy, the large investments required for a large scale development of geothermal energy, the voluntary policy and the ambitious objectives in the field of bio-energies and bio-fuels, and California as a leader in the field of renewable energies

  17. An approach to facilitate healthcare professionals' readiness to support technology use in everyday life for persons with dementia.

    OpenAIRE

    Malinowsky, Camilla; Rosenberg, Lena; Nygård, Louise

    2014-01-01

    Everyday technologies (ETs) like microwave ovens and automatic telephone services as well as assistive technologies (ATs) are often used in the performance of everyday activities. As a consequence, the ability to manage technology is important. This pilot study aimed to clarify the applicability of a model for knowledge translation to support healthcare professionals, to support technology use among older adults with dementia and their significant others. An additional aim was to explore the ...

  18. Using mobile phone technology to provide recovery support for women offenders.

    Science.gov (United States)

    Scott, Christy K; Johnson, Kimberly; Dennis, Michael L

    2013-10-01

    Mobile technology holds promise as a recovery tool for people with substance use disorders. However, some populations who may benefit the most may not have access to or experience with mobile phones. Incarcerated women represent a group at high risk for recidivism and relapse to substance abuse. Cost-effective mechanisms must be in place to support their recovery upon release. This study explores using mobile technology as a recovery management tool for women offenders residing in the community following release from jail. This study surveyed 325 minority women offenders with substance use disorders to determine whether or not they use cell phones, their comfort with texting and search features, and the social networks that they access from mobile phones. We found that 83% of survey subjects had cell phones; 30% of those were smartphones. Seventy-seven percent of the women reported access to supportive friends, and 88% had close family members they contacted regularly using mobile technology. Results indicated that most of the women were comfortable using a mobile phone, although the majority of them had prepaid minutes rather than plans, and most did currently use smartphones or have the capability to download applications or access social networks via their phones. Most women reported that they would be comfortable using a mobile phone to text, e-mail, and answer surveys. The high rate of adoption of mobile technology by women offenders makes them a promising target for recovery support delivered via mobile phone.

  19. Support for immigration reduction and physician distrust in the United States

    Directory of Open Access Journals (Sweden)

    Frank L Samson

    2016-06-01

    Full Text Available Objectives: Health research indicates that physician trust in the United States has declined over the last 50 years. Paralleling this trend is a decline in social capital, with researchers finding a negative relationship between immigration-based diversity and social capital. This article examines whether physician distrust is also tied to immigration-based diversity and declining social capital. Methods: Data come from the 2012 General Social Survey, one of the gold standards of US public opinion surveys, using a national probability sample of 1080 adult US respondents. Key measures included support for reducing levels of immigration to the United States and multiple measures of physician trust. Results: The results of ordinary least squares regressions, using survey weights, indicate that support for reducing immigration is positively linked to physician distrust, bringing physician distrust into the orbit of research on diversity and declining social capital. Models controlled for age, education, income, gender, race, nativity, conservatism, unemployed status, lack of health insurance, and self-rated health. Furthermore, analyses of a subset of respondents reveal that measures of general trust and some forms of institutional trust do not explain away the association between support for immigration reduction and physician distrust, though confidence in science as an institution appears relevant. Conclusion: Consistent with diversity and social capital research, this article finds that an immigration attitude predicts physician distrust. Physician distrust may not be linked just to physician–patient interactions, the structure of the health care system, or health policies, but could also be tied to declining social trust in general.

  20. Resource and energy saving technologies of refractory linings of thermal units

    Directory of Open Access Journals (Sweden)

    Khlystov Alexey

    2017-01-01

    Full Text Available In Russian practice, the vast majority of thermal units and other industrial furnaces are still built with the use of single-piece ceramic refractories. The purpose of research was to develop a wide range of special materials suitable for repairs of any linings of thermal units. In accordance with the purpose, this paper solved the following tasks: Selecting reactive binders used in the compositions of refractory concrete capable of structural modification of any refractory lining materials; Developing impregnating-coating compositions based on reactive binders capable of forming a protective coating with high adhesive strengthen linings; Developing compositions of refractory ramming mixtures, used for the repair of large fragments of linings and having high adhesion to any refractory lining materials; Checking the effectiveness of the technology in production environment. In this paper, we used not only standard techniques but also specially designed ones, in particular, to determine the adhesion of refractory coating to the refractory lining materials. The technology of repair works consists of application of some or all of the above solutions depending on the state of worn out lining of the thermal unit. Testing was carried out on many sintering plants of Samara region where rotary kilns are operated. The use of such chemically active substances as phosphate bonds and sodium silicate solutes in special refractory repair compositions with different functional purpose, allowed increasing the durability of liners of expanded fire clay rotary kilns as a result of reparatory works. Some items from the general technological scheme of repair works to restore the linings of heating units may be used in industrial furnaces in many industries.

  1. Technology meets tradition: The perceived impact of the introduction of information and communication technology on ward rounds in the intensive care unit.

    Science.gov (United States)

    Plumb, Jennifer J; Hains, Isla; Parr, Michael J; Milliss, David; Herkes, Robert; Westbrook, Johanna I

    2017-09-01

    Public policy in many health systems is currently dominated by the quest to find ways to 'do more with less'-to achieve better outcomes at a reduced cost. The success or failure of initiatives in support of this quest are often understood in terms of an adversarial dynamic or struggle between the professional logics of medicine and of management. Here, we use the case of the introduction of information and communication technology (ICT) to a well-established ritual of medical autonomy (the medical ward round) to articulate a more nuanced explanation of how and why new ways of working with technology are accepted and adopted (or not). The study was conducted across four intensive care units (ICUs) in major teaching hospitals in Sydney, Australia. Using interviews, we examined 48 doctors' perceptions of the impact of ICT on ward round practice. We applied the concept of institutional logics to frame our analysis. Interview transcripts were analysed using a hybrid of deductive and inductive thematic analysis. The doctors displayed a complex engagement with the technology that belies simplistic characterisations of medical rejection of managerial encroachment. In fact, they selectively welcomed into the ward round aspects of the technology which reinforced the doctor's place in the healthcare hierarchy and which augmented their role as scientists. At the same time, they guarded against allowing managerial logic embedded in ICT to de-emphasise their embodied subjectivity in relation to the patient as a person rather than as a collection of parameters. ICT can force the disruption of some aspects of existing routines, even where these are long-established rituals. Resistance arose when the new technology did not fit with the 'logic of care'. Incorporation of the logic of care into the design and customisation of clinical information systems is a challenge and potentially counterproductive, because it could attempt to apply a technological fix to what is essentially a

  2. Location-based technologies for supporting elderly pedestrian in "getting lost" events.

    Science.gov (United States)

    Pulido Herrera, Edith

    2017-05-01

    Localization-based technologies promise to keep older adults with dementia safe and support them and their caregivers during getting lost events. This paper summarizes mainly technological contributions to support the target group in these events. Moreover, important aspects of the getting lost phenomenon such as its concept and ethical issues are also briefly addressed. Papers were selected from scientific databases and gray literature. Since the topic is still in its infancy, other terms were used to find contributions associated with getting lost e.g. wandering. Trends of applying localization systems were identified as personal locators, perimeter systems and assistance systems. The first system barely considered the older adult's opinion, while assistance systems may involve context awareness to improve the support for both the elderly and the caregiver. Since few studies report multidisciplinary work with a special focus on getting lost, there is not a strong evidence of the real efficiency of localization systems or guidelines to design systems for the target group. Further research about getting lost is required to obtain insights for developing customizable systems. Moreover, considering conditions of the older adult might increase the impact of developments that combine localization technologies and artificial intelligence techniques. Implications for Rehabilitation Whilst there is no cure for dementia such as Alzheimer's, it is feasible to take advantage of technological developments to somewhat diminish its negative impact. For instance, location-based systems may provide information to early diagnose the Alzheimer's disease by assessing navigational impairments of older adults. Assessing the latest supportive technologies and methodologies may provide insights to adopt strategies to properly manage getting lost events. More user-centered designs will provide appropriate assistance to older adults. Namely, customizable systems could assist older adults

  3. A Survey of Online and Mobile Technology Use at Peer Support Agencies.

    Science.gov (United States)

    Aschbrenner, Kelly A; Naslund, John A; Grinley, Thomas; Bienvenida, John Carlo M; Bartels, Stephen J; Brunette, Mary

    2018-01-04

    Understanding how individuals with mental illness who receive services at peer support agencies use technology can inform the development of online and mobile health interventions tailored for users in these non-traditional mental health settings. The purpose of this study was to assess the use of technology among individuals with mental illness at peer support agencies. A survey delivered within peer support agencies (PSAs) in one state assessed technology use among individuals ages 18 and over with a self-identified mental illness receiving services at these agencies. In total, 195 individuals from 10 PSAs completed the survey. Eighty-two percent of respondents used the internet, with 63% of respondents connected to the internet at the PSAs. Eighty one percent of respondents owned a cell phone, 70% used text messaging, 58% owned smartphones, 61% used mobile applications, and 72% used social media. PSA users under age 55 were significantly more likely to own a smartphone than PSA users age 55 and older. Among internet users, 71% had searched for health information online and 57% had searched for mental health information online. Many individuals who receive services at PSAs have access to online and mobile technologies. These technologies may be leveraged to expand the reach of evidence-based health and mental health programs to individuals in these non-traditional mental health settings. Future research should explore the feasibility of intervention strategies that involve PSAs as a resource for linking people with mental illness to online and mobile support for their health and wellness goals.

  4. A Systematic Review of Reviews Evaluating Technology-Enabled Diabetes Self-Management Education and Support.

    Science.gov (United States)

    Greenwood, Deborah A; Gee, Perry M; Fatkin, Kathy J; Peeples, Malinda

    2017-09-01

    Since the introduction of mobile phones, technology has been increasingly used to enable diabetes self-management education and support. This timely systematic review summarizes how currently available technology impacts outcomes for people living with diabetes. A systematic review of high quality review articles and meta analyses focused on utilizing technology in diabetes self-management education and support services was conducted. Articles were included if published between January 2013 and January 2017. Twenty-five studies were included for analysis. The majority evaluated the use of mobile phones and secure messaging. Most studies described healthy eating, being active and metabolic monitoring as the predominant self-care behaviors evaluated. Eighteen of 25 reviews reported significant reduction in A1c as an outcome measure. Four key elements emerged as essential for improved A1c: (1) communication, (2) patient-generated health data, (3) education, and (4) feedback. Technology-enabled diabetes self-management solutions significantly improve A1c. The most effective interventions incorporated all the components of a technology-enabled self-management feedback loop that connected people with diabetes and their health care team using 2-way communication, analyzed patient-generated health data, tailored education, and individualized feedback. The evidence from this systematic review indicates that organizations, policy makers and payers should consider integrating these solutions in the design of diabetes self-management education and support services for population health and value-based care models. With the widespread adoption of mobile phones, digital health solutions that incorporate evidence-based, behaviorally designed interventions can improve the reach and access to diabetes self-management education and ongoing support.

  5. Research on Key Technologies of Unit-Based CNC Machine Tool Assembly Design

    Directory of Open Access Journals (Sweden)

    Zhongqi Sheng

    2014-01-01

    Full Text Available Assembly is the part that produces the maximum workload and consumed time during product design and manufacturing process. CNC machine tool is the key basic equipment in manufacturing industry and research on assembly design technologies of CNC machine tool has theoretical significance and practical value. This study established a simplified ASRG for CNC machine tool. The connection between parts, semantic information of transmission, and geometric constraint information were quantified to assembly connection strength to depict the assembling difficulty level. The transmissibility based on trust relationship was applied on the assembly connection strength. Assembly unit partition based on assembly connection strength was conducted, and interferential assembly units were identified and revised. The assembly sequence planning and optimization of parts in each assembly unit and between assembly units was conducted using genetic algorithm. With certain type of high speed CNC turning center, as an example, this paper explored into the assembly modeling, assembly unit partition, and assembly sequence planning and optimization and realized the optimized assembly sequence of headstock of CNC machine tool.

  6. Characteristics of Adults Seeking Health Care Provider Support Facilitated by Mobile Technology: Secondary Data Analysis.

    Science.gov (United States)

    Bosak, Kelly; Park, Shin Hye

    2017-12-21

    Mobile health technology is rapidly evolving with the potential to transform health care. Self-management of health facilitated by mobile technology can maximize long-term health trajectories of adults. Little is known about the characteristics of adults seeking Web-based support from health care providers facilitated by mobile technology. This study aimed to examine the following: (1) the characteristics of adults who seek human support from health care providers for health concerns using mobile technology rather than from family members and friends or others with similar health conditions and (2) the use of mobile health technology among adults with chronic health conditions. Findings of this study were interpreted in the context of the Efficiency Model of Support. We first described characteristics of adults seeking Web-based support from health care providers. Using chi-square tests for categorical variables and t test for the continuous variable of age, we compared adults seeking Web-based and conventional support by demographics. The primary aim was analyzed using multivariate logistic regression to examine whether chronic health conditions and demographic factors (eg, sex, income, employment status, race, ethnicity, education, and age) were associated with seeking Web-based support from health care providers. The sample included adults (N=1453), the majority of whom were female 57.60% (837/1453), white 75.02% (1090/1453), and non-Hispanic 89.13% (1295/1453). The age of the participants ranged from 18 to 92 years (mean 48.6, standard deviation [SD] 16.8). The majority 76.05% (1105/1453) of participants reported college or higher level of education. A disparity was found in access to health care providers via mobile technology based on socioeconomic status. Adults with annual income of US $30,000 to US $100,000 were 1.72 times more likely to use Web-based methods to contact a health care provider, and adults with an annual income above US $100,000 were 2.41 to

  7. Integrated test plan for the field demonstration of the supported liquid membrane unit

    International Nuclear Information System (INIS)

    Dunks, K.L.; Hodgson, K.M.

    1995-06-01

    This Integrated Test Plan describes the operation and testing of a hybrid reverse osmosis (RO)/coupled transport (CT) groundwater remediation test unit, also referred to as the Environmental Restoration Technology Demonstrations at the Hanford Site. The SLM will be used to remove uranium, technetium-99, and nitrate from a selected groundwater source at the Hanford Site. The overall purpose of this test is to determine the efficiency of the RO/CT membranes operating in a hybrid unit, the ease of operating and maintaining the SLM, and the amount of secondary waste generated as a result of processing. The goal of the SLM is to develop a RO/CT process that will be applicable for removing contaminants from almost any contaminated water. This includes the effluents generated as part of the day-to-day operation of most any US Department of Energy (DOE) site. The removal of contaminants from the groundwaters before they reach the Columbia River or offsite extraction wells will reduce the risk that the population will be exposed to these compounds and will reduce the cost of subsequent groundwater cleanup

  8. Development of design technology for system - integrated modular advanced react or (SMART) /technology support of NSSS design for SMART

    Energy Technology Data Exchange (ETDEWEB)

    Joon, Hah Yung; Kim, Kee Eun [KOPEC, Taejeon (Korea)

    2002-03-01

    SMART design concept is very different from that of the commercial PWRs, as the main components such as the steam generator, pressurizer, and the main coolant pumps are incorporate the related sub-part systems into the reactor vessel. In this report the design for SMART is the basic design stage and is the new design technology development task for the first trial in Korea. KOPEC NED has participated with Korea Atomic Energy Research Institute for the task of 'Development of Design Technology for SMART' as supporting sub-task of it. The system design (ECCS, Makeup and Purification System), mechanical design (Seismic Analysis, BLPB Analysis, Structural Analysis, Design Load Calculation, Stress Fatigue Evaluation, Fracture Mechanical and Structural Integrity Evaluation), MMIS design (Alarm and Indication System, Information Processing System, Large Display Panel, Human System Interface Guideline) have been performed as a basic design for SMART during 31 months (1999. 9.1{approx}2002.3.31). This report is the final one for the support of the main task of Korea Atomic Energy Research Institute. 124 refs., 154 figs., 97 tabs. (Author)

  9. Technology solutions to support supervisory activities and also to provide information access to the society

    Science.gov (United States)

    Paladini, D.; Mello, A. B.

    2016-07-01

    Inmetro's data about the conformity of certificated products, process and services are, usually, displayed at fragmented databases of difficult access for several reasons, for instance, the lack of computational solutions which allow this kind of access to its users. A discussion about some of the technological solutions to support supervisory activities by the appropriate regulatory bodies and also to provide information access to society in general is herein presented, along with a theoretical explanation of the pros and cons of such technologies to the conclusion that a mobile platform seems to be the best tool for the requirements of Inmetro.

  10. Concept of information technology of monitoring and decision-making support

    Science.gov (United States)

    Kovalenko, Aleksandr S.; Tymchyk, Sergey V.; Kostyshyn, Sergey V.; Zlepko, Sergey M.; Wójcik, Waldemar; Kalizhanova, Aliya; Burlibay, Aron; Kozbekova, Ainur

    2017-08-01

    Presented concept of information technology monitoring and decision support to determine the health of students. The preconditions of a concept formulated its goal and purpose. Subject area concepts proposed to consider a set of problems, grouped into 8 categories, which in turn necessitates the application when creating technology basic principles from the principles of "first head" and "systems approach" to the principles of "interoperability" and "system integration ". The content of the information providing IT, its position in the segment of single information space, stages of creation. To evaluate the efficiency of the IT system developed proposed criteria.

  11. Applying technology to visually support language and communication in individuals with autism spectrum disorders.

    Science.gov (United States)

    Shane, Howard C; Laubscher, Emily H; Schlosser, Ralf W; Flynn, Suzanne; Sorce, James F; Abramson, Jennifer

    2012-06-01

    The burgeoning role of technology in society has provided opportunities for the development of new means of communication for individuals with Autism Spectrum Disorders (ASD). This paper offers an organizational framework for describing traditional and emerging augmentative and alternative communication (AAC) technology, and highlights how tools within this framework can support a visual approach to everyday communication and improve language instruction. The growing adoption of handheld media devices along with applications acquired via a consumer-oriented delivery model suggests a potential paradigm shift in AAC for people with ASD.

  12. Assessing the quality of decision support technologies using the International Patient Decision Aid Standards instrument (IPDASi.

    Directory of Open Access Journals (Sweden)

    Glyn Elwyn

    Full Text Available To describe the development, validation and inter-rater reliability of an instrument to measure the quality of patient decision support technologies (decision aids.Scale development study, involving construct, item and scale development, validation and reliability testing.There has been increasing use of decision support technologies--adjuncts to the discussions clinicians have with patients about difficult decisions. A global interest in developing these interventions exists among both for-profit and not-for-profit organisations. It is therefore essential to have internationally accepted standards to assess the quality of their development, process, content, potential bias and method of field testing and evaluation.Scale development study, involving construct, item and scale development, validation and reliability testing.Twenty-five researcher-members of the International Patient Decision Aid Standards Collaboration worked together to develop the instrument (IPDASi. In the fourth Stage (reliability study, eight raters assessed thirty randomly selected decision support technologies.IPDASi measures quality in 10 dimensions, using 47 items, and provides an overall quality score (scaled from 0 to 100 for each intervention. Overall IPDASi scores ranged from 33 to 82 across the decision support technologies sampled (n = 30, enabling discrimination. The inter-rater intraclass correlation for the overall quality score was 0.80. Correlations of dimension scores with the overall score were all positive (0.31 to 0.68. Cronbach's alpha values for the 8 raters ranged from 0.72 to 0.93. Cronbach's alphas based on the dimension means ranged from 0.50 to 0.81, indicating that the dimensions, although well correlated, measure different aspects of decision support technology quality. A short version (19 items was also developed that had very similar mean scores to IPDASi and high correlation between short score and overall score 0.87 (CI 0.79 to 0.92.This work

  13. Identification of Promising Remediation Technologies for Iodine in the UP-1 Operable Unit

    Energy Technology Data Exchange (ETDEWEB)

    Strickland, Christopher E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnson, Christian D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lee, Brady D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Qafoku, Nikolla [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Szecsody, James E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Truex, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Vermeul, Vincent R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-09-01

    Iodine-129 (129I) generated at the U.S. Department of Energy (DOE) Hanford Site during plutonium production was released to the subsurface, resulting in several large, though dilute, plumes in the groundwater, including the plume in the 200-UP-1 operable unit (OU). Because 129I is an uncommon contaminant, relevant remediation experience and scientific literature are limited, though work is under way to better understand the fate and transport of 129I in the environment and the effectiveness of potential remediation technologies. The recent UP-1 Evaluation Plan for Iodine and report on the Conceptual Model of Iodine Behavior in the Subsurface at the Hanford Site provide information on the history of contamination in the 200-UP-1 OU, relevant controlling processes (biological and geochemical), risk, the conceptual site model, and potential remedial options, which provided a foundation for this study. In this study, available information was compiled and used to categorize potential remediation technologies, culminating in a recommendation of promising technologies for further evaluation. Approaches to improve the technical information about promising technologies are also recommended in this study so that a subsequent evaluation of potential remediation alternatives can assess these technologies.

  14. Evaluating the development of carbon capture and storage technologies in the United States

    International Nuclear Information System (INIS)

    van Alphen, Klaas; Noothout, Paul M.; Hekkert, Marko P.; Turkenburg, Wim C.

    2010-01-01

    Carbon capture and storage (CCS) is seen as an important solution to solve the twin challenge of reducing GHG emissions, while utilizing fossil fuel reserves to meet future energy requirements. In this study an innovation systems perspective is applied to review the development of CCS technologies in the US between 2000 and 2009 and to come up with policy recommendations for technology managers that wish to accelerate the deployment of CCS. The analysis describes the successful built-up of an innovation system around CCS and pinpoints the key determinants for this achievement. However, the evaluation of the system's performance also indicates that America's leading role in the development of CCS should not be taken for granted. It shows that the large CCS R and D networks, as well as the extensive CCS knowledge base, which have been accumulated over the past decade, have not yet been valorized by entrepreneurs to explore the market for integrated CCS concepts linked to power generation. Therefore, it is argued that the build-up of the innovation system has entered a critical phase that is decisive for a further thriving development of CCS technologies in the US. This study provides a clear understanding of the current barriers to the technology's future deployment and outlines a policy strategy that (1) stimulates technological learning; (2) facilitates collaboration and coordination in CCS actor networks; (3) creates financial and market incentives for the technology; and (4) provides supportive regulation and sound communication on CCS. (author)

  15. Propulsion Control Technology Development in the United States A Historical Perspective

    Science.gov (United States)

    Jaw, Link C.a; Garg, Sanjay

    2005-01-01

    This paper presents a historical perspective of the advancement of control technologies for aircraft gas turbine engines. The paper primarily covers technology advances in the United States in the last 60 years (1940 to approximately 2002). The paper emphasizes the pioneering technologies that have been tested or implemented during this period, assimilating knowledge and experience from industry experts, including personal interviews with both current and retired experts. Since the first United States-built aircraft gas turbine engine was flown in 1942, engine control technology has evolved from a simple hydro-mechanical fuel metering valve to a full-authority digital electronic control system (FADEC) that is common to all modern aircraft propulsion systems. At the same time, control systems have provided engine diagnostic functions. Engine diagnostic capabilities have also evolved from pilot observation of engine gauges to the automated on-board diagnostic system that uses mathematical models to assess engine health and assist in post-flight troubleshooting and maintenance. Using system complexity and capability as a measure, we can break the historical development of control systems down to four phases: (1) the start-up phase (1942 to 1949), (2) the growth phase (1950 to 1969), (3) the electronic phase (1970 to 1989), and (4) the integration phase (1990 to 2002). In each phase, the state-of-the-art control technology is described and the engines that have become historical landmarks, from the control and diagnostic standpoint, are identified. Finally, a historical perspective of engine controls in the last 60 years is presented in terms of control system complexity, number of sensors, number of lines of software (or embedded code), and other factors.

  16. TECHNOLOGICAL DEVELOPMENT OF DRIVING SUPPORT SYSTEMS BASED ON HUMAN BEHAVIORAL CHARACTERISTICS

    Directory of Open Access Journals (Sweden)

    Shunichi DOI

    2006-01-01

    Full Text Available Driving support and cruise assist systems are of growing importance in achieving both road traffic safety and convenience. Such driver support seeks to achieve, with the highest possible quality, nothing less than “driver-vehicle symbiosis under all conditions.” At the same time, many traffic accidents result from improper driver behavior. The author focuses on driver behavior under various driving conditions, conducting detailed measurement and analysis of visual perception and attention characteristics as well as perceptual characteristics involved in driving. The aim in doing so is to support research on driving support systems and driving workload reduction technologies that function as human-vehicle systems and take such characteristics into account.

  17. Functional unit, technological dynamics, and scaling properties for the life cycle energy of residences.

    Science.gov (United States)

    Frijia, Stephane; Guhathakurta, Subhrajit; Williams, Eric

    2012-02-07

    Prior LCA studies take the operational phase to include all energy use within a residence, implying a functional unit of all household activities, but then exclude related supply chains such as production of food, appliances, and household chemicals. We argue that bounding the functional unit to provision of a climate controlled space better focuses the LCA on the building, rather than activities that occur within a building. The second issue explored in this article is how technological change in the operational phase affects life cycle energy. Heating and cooling equipment is replaced at least several times over the lifetime of a residence; improved efficiency of newer equipment affects life cycle energy use. The third objective is to construct parametric models to describe LCA results for a family of related products. We explore these three issues through a case study of energy use of residences: one-story and two-story detached homes, 1,500-3,500 square feet in area, located in Phoenix, Arizona, built in 2002 and retired in 2051. With a restricted functional unit and accounting for technological progress, approximately 30% of a building's life cycle energy can be attributed to materials and construction, compared to 0.4-11% in previous studies.

  18. Size matters: Installed maximal unit size predicts market life cycles of electricity generation technologies and systems

    International Nuclear Information System (INIS)

    Li, N.

    2008-01-01

    The electricity generation technologies and systems are complex and change in very dynamic fashions, with a multitude of energy sources and prime movers. Since an important concept in generator design is the 'economies of scale', we discover that the installed maximal unit size (capacity) of the generators is a key 'envelope-pushing' characteristic with logistical behaviors. The logistical wavelet analysis of the max unit sizes for different fuels and prime movers, and the cumulative capacities, reveals universal quantitative features in the aggregate evolution of the power industry. We extract the transition times of the max sizes (spanning 10-90% of the saturation limits) for different technologies and systems, and discover that the max size saturation in the 90-99% range precedes the saturation of cumulative capacities of the corresponding systems in the US. While these universal laws are still empirical, they give us a simple yet elegant framework to examine the evolution of the power industry and markets in predictive, not just descriptive, terms. Such laws give us a quantitative tool to spot trends and predict future development, invaluable in planning and resource allocation based on intrinsic technology and system market life cycles. (author)

  19. Management support services to the Office of Utility Technologies. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-16

    The Office of Utility Technologies works cooperatively with industry and the utility sector to realize the market potential for energy efficiency and renewable energy technologies. Under this contract, BNF has provided management support services for OUT R&D activities for the following Program offices: (1) Office of Energy Management; (2) Office of Solar Energy Conversion; (3) Office of Renewable Energy Conversion; and (4) Deputy Assistant Secretary. During the period between 4/17/91 and 9/17/93, BNF furnished the necessary personnel, equipment, materials, facilities and travel required to provide management support services for each of the above Program Offices. From 9/18/93 to 12/17/93, BNF has been involved in closeout activities, including final product deliverables. Research efforts that have been supported in these Program Offices are: (1) for Energy Management -- Advanced Utility Concepts Division; Utility Systems Division; Integrated Planning; (2) for Solar Energy Conversion -- Photovoltaics Division; Solar Thermal and Biomass Power Division; (3) for Renewable Energy Conversion -- Geothermal Division; Wind, Hydroelectric and Ocean Systems Division; (4) for the Deputy Assistant Secretary -- support as required by the Supporting Staff. This final report contains summaries of the work accomplished for each of the Program Offices listed above.

  20. Caring for the person with cancer: Information and support needs and the role of technology.

    Science.gov (United States)

    Heynsbergh, Natalie; Botti, Mari; Heckel, Leila; Livingston, Patricia M

    2018-04-06

    Informal carers experience a variety of information and support needs when providing care to someone with cancer. It is unclear when carers seek information and what resources they access to support themselves throughout the cancer trajectory. A sample of 45 carers and 15 oncology nurses were recruited to participate in either focus groups or phone interviews. Carers in the study were more likely to be women (60%), caring for a spouse or partner (64.4%), living with the patient (86.7%), and hold a university degree (46.7%). The majority of oncology nurses were females (66.6%). Findings showed that carers had limited access to adequate information as needs arose. Supports used to address information needs included information booklets, the Internet, and communication with healthcare professionals or with other carers. Barriers in communication between nurses and carers impacted on the adequacy of information received. Participants reported that technology, such as smartphone applications, might be appropriate for improving information and support needs. Caring for someone with cancer is multifaceted. Carers need access to timely information to help them effectively manage patients' needs. Future studies should assess the role of contemporary approaches, such as digital technology, as a solution to the delivery of information and support for carers of people with cancer. © 2018 The Authors. Psycho-Oncology Published by John Wiley & Sons Ltd.