WorldWideScience

Sample records for technology studies sts

  1. Some Implications of the Philosophy of Technology for Science, Technology and Society (STS) Studies

    Science.gov (United States)

    Ankiewicz, Piet; De Swardt, Estelle; De Vries, Marc

    2006-01-01

    Technology is frequently considered in terms of its impact on entities outside its essential nature: as the impact of technology on the environment and society, but also the impact of human values and needs on technology. By taking particular social implications of technology into account, the Science-Technology relationship can be extended to the…

  2. STS-Astro: Astronomy in the focus of Science, Technology and Society and Case Study in Education Distance

    Science.gov (United States)

    Ferreira, O. R.

    2014-02-01

    The dissertation addresses the focus of Astronomy in Science, Technology and Society [STS}, which the author calls the STS-Astro. Observes the International Year of the Astronomy 2009 [IYA 2009] as one of the greatest experiences STS worldwide, causing unprecedented integration between science, technology and humanities, with positive impacts in many sectors of society and are still worthy of study, specially in Brazil due to the implementation of the International Year of Astronomy, Brazil 2009 [IYABrazil-2009}. Astronomy is also investigated in the area of Education, based mainly on theoretical aspects of educational socio-interacionist of Lev Semenovich Vygotsky (Vygotsky, 1991, 2008 and 2012, p. 103-117) and socio-historical cultural of Paulo Reglus Neves Freire (1979, 1982 and 1996), but when necessary and still keeping the field of constructivism, properly taking advantage of the interactionism and transdisciplinarity of Jean William Fritz Piaget (1983). Concerning Distance Education [DE], it is noted significant growth at the graduate and postgraduate courses. New challenges arise, with the establishment of an increasingly accustomed to Information and Communication Technologies [ICT] and the teaching methodologies to be used and developed, with Astronomy becoming an important instrument in the teaching-learning process associated technologies. Using the methodology of action research, we proceeded with a case study involving 26 students of the discipline of Astronomy Topics applied to Education, between November 1 and December 17, 2012, of the postgraduation courses in Distance Education at the Universidade Cruzeiro do Sul [Southern Cross University]. The results obtained permit statistical surveys therefore quantitative, but also qualitative information about the teaching-learning Astronomy by DE. Analyses of performance and progress of each student and set permit a finding interaction among those involved in the mediation of the teacher-tutor who, in turn

  3. The impact of a dedicated Science-Technology-Society (STS) course on student knowledge of STS content

    Science.gov (United States)

    Barron, Paul E.

    In the last half century, public awareness of issues such as population growth, environmental pollution and the threat of nuclear war has pressured science education to reform to increase student social responsibility. The emerging Science-Technology-Society (STS) movement addressed these concerns by developing numerous strategies and curricula. Considerable diagnostic research has been conducted on student knowledge of the nature of science, but not on the wider scope of STS content (e.g., the nature of science and technology and their interactions with society). However, researchers have not widely studied the impact of comprehensive STS curricula on students' knowledge of STS content nor the nature of STS teaching practice that influenced this knowledge gain. This study examined student success and teacher performance in a special STS course in Ontario, Canada. Research questions focused on the STS content knowledge gain by students completing this course and the impact of the STS teachers' teaching practices on this knowledge gain. Student data were collected using pre-course and post-course assessments of students' STS content knowledge. Teacher data were obtained using semi-structured interviews, classroom observations and videotapes. Statistical analysis indicated that, after completing the STS course, students significantly increased their STS content knowledge as measured by the Views on Science Technology Society instrument. Gender and academic achievement had no significant impact on this knowledge gain, implying that this course, as taught by these teachers, could appeal to a wide range of students as a general education course. The second part of the study indicated that detailed research is needed on the relationship between STS teaching practice and student STS content knowledge gain. The small sample size prevents generalizations but initial indications show that factors such constructivist teaching practices and strong teacher STS content knowledge

  4. Impact of STS Issue Oriented Instruction on Pre-Service Elementary Teachers' Views and Perceptions of Science, Technology, and Society

    Science.gov (United States)

    Amirshokoohi, Aidin

    2016-01-01

    The purpose of the study was to investigate the impact of Science, Technology, Society (STS) issue oriented science methods course on pre-service teachers' views and perceptions toward STS issues and instruction as well as their levels of environmental literacy. The STS issue oriented curriculum was designed to help pre-service teachers improve…

  5. Effectiveness of Science-Technology-Society (STS) Instruction on Student Understanding of the Nature of Science and Attitudes toward Science

    Science.gov (United States)

    Akcay, Behiye; Akcay, Hakan

    2015-01-01

    The study reports on an investigation about the impact of science-technology-society (STS) instruction on middle school student understanding of the nature of science (NOS) and attitudes toward science compared to students taught by the same teacher using traditional textbook-oriented instruction. Eight lead teachers used STS instruction an…

  6. Informing Science (IS and Science and Technology Studies (STS: The University as Decision Center (DC for Teaching Interdisciplinary Research

    Directory of Open Access Journals (Sweden)

    Teresa Castelao-Lawless

    2001-01-01

    Full Text Available Students of history and philosophy of science courses at my University are either naïve robust realists or naïve relativists in relation to science and technology. The first group absorbs from culture stereotypical conceptions, such as the value-free character of the scientific method, that science and technology are impervious to history or ideology, and that science and religion are always at odds. The second believes science and technology were selected arbitrarily by ideologues to have privileged world views of reality to the detriment of other interpretations. These deterministic outlooks must be challenged to make students aware of the social importance of their future roles, be they as scientists and engineers or as science and technology policy decision makers. The University as Decision Center (DC not only reproduces the social by teaching standard solutions to well-defined problems but also provides information regarding conflict resolution and the epistemological, individual, historical, social, and political mechanisms that help create new science and technology. Interdisciplinary research prepares students for roles that require science and technology literacy, but raises methodological issues in the context of the classroom as it increases uncertainty with respect to apparently self-evident beliefs about scientific and technological practices.

  7. Paul Tillich and Technology: His Importance for Robust Science, Technology, and Society (STS) Education.

    Science.gov (United States)

    Deitrich, Richard

    1990-01-01

    Discussed is the linkage between science, technology, and religious ideas. Tillich's continuum of existentialism, philosophy, and theology and his concepts of the multidimensional unity of life have been used to develop a technology and religion course. Included are the core ethic and basic tenets for STS education. (KR)

  8. STS Case Study Development Support

    Science.gov (United States)

    Rosa de Jesus, Dan A.; Johnson, Grace K.

    2013-01-01

    The Shuttle Case Study Collection (SCSC) has been developed using lessons learned documented by NASA engineers, analysts, and contractors. The SCSC provides educators with a new tool to teach real-world engineering processes with the goal of providing unique educational materials that enhance critical thinking, decision-making and problem-solving skills. During this third phase of the project, responsibilities included: the revision of the Hyper Text Markup Language (HTML) source code to ensure all pages follow World Wide Web Consortium (W3C) standards, and the addition and edition of website content, including text, documents, and images. Basic HTML knowledge was required, as was basic knowledge of photo editing software, and training to learn how to use NASA's Content Management System for website design. The outcome of this project was its release to the public.

  9. Constructive Science and Technology Studies: On the Path to Being?

    Science.gov (United States)

    Steiner, Carol J.

    1999-01-01

    Suggests that science and technology studies (STS) is ready to reconsider an approach based on Heideggerian phenomenology. Argues that STS is facing a confrontation with the inadequacies of constructivism's founding assumptions. (CCM)

  10. Science Education and the Science-Technology-Society (S-T-S) Theme.

    Science.gov (United States)

    Bybee, Rodger W.

    1987-01-01

    Aims to clarify the relationship between science education and the science-technology-society (STS) theme and to develop a justification for the inclusion of the STS theme. Examines the current debate over definitions in science education, and provides an historical perspective of science education's purpose as a social institution. (TW)

  11. Science-Technology-Society (STS): A New Paradigm in Science Education

    Science.gov (United States)

    Mansour, Nasser

    2009-01-01

    Changes in the past two decades of goals for science education in schools have induced new orientations in science education worldwide. One of the emerging complementary approaches was the science-technology-society (STS) movement. STS has been called the current megatrend in science education. Others have called it a paradigm shift for the field…

  12. Nonlinear Simulation Studies of Tokamaks and STs

    Energy Technology Data Exchange (ETDEWEB)

    W. Park; J. Breslau; J. Chen; G.Y. Fu; S.C. Jardin; S. Klasky; J. Menard; A. Pletzer; B.C. Stratton; D. Stutman; H.R. Strauss; L.E. Sugiyama

    2003-07-07

    The multilevel physics, massively parallel plasma simulation code, M3D, has been used to study spherical tori (STs) and tokamaks. The magnitude of outboard shift of density profiles relative to electron temperature profiles seen in NSTX [National Spherical Torus Experiment] under strong toroidal flow is explained. Internal reconnection events in ST discharges can be classified depending on the crash mechanism, just as in tokamak discharges; a sawtooth crash, disruption due to stochasticity, or high-beta disruption. Toroidal shear flow can reduce linear growth of internal kink. It has a strong stabilizing effect nonlinearly and causes mode saturation if its profile is maintained, e.g., through a fast momentum source. Normally, however, the flow profile itself flattens during the reconnection process, allowing a complete reconnection to occur. In some cases, the maximum density and pressure spontaneously occur inside the island and cause mode saturation. Gyrokinetic hot particle/MHD hybrid studies of NSTX show the effects of fluid compression on a fast-ion-driven n = 1 mode. MHD studies of recent tokamak experiments with a central current hole indicate that the current clamping is due to sawtooth-like crashes, but with n = 0.

  13. Global Warming and Ozone Layer Depletion: STS Issues for Social Studies Classrooms.

    Science.gov (United States)

    Rye, James A.; Strong, Donna D.; Rubba, Peter A.

    2001-01-01

    Explores the inclusion of science-technology-society (STS) education in social studies. Provides background information on global warming and the depletion of the ozone layer. Focuses on reasons for teaching global climate change in the social studies classroom and includes teaching suggestions. Offers a list of Web sites about global climate…

  14. Global Warming and Ozone Layer Depletion: STS Issues for Social Studies Classrooms.

    Science.gov (United States)

    Rye, James A.; Strong, Donna D.; Rubba, Peter A.

    2001-01-01

    Explores the inclusion of science-technology-society (STS) education in social studies. Provides background information on global warming and the depletion of the ozone layer. Focuses on reasons for teaching global climate change in the social studies classroom and includes teaching suggestions. Offers a list of Web sites about global climate…

  15. The Floating Ampersand: STS Past and STS to Come

    Directory of Open Access Journals (Sweden)

    Sheila Jasanoff

    2016-07-01

    Full Text Available STS has become a discipline in the sense that it offers new ways to read and make sense of the world. It remains an amalgam, however, of two linked yet separate lines of inquiry, both abbreviated as STS. Science and technology studies refers to the investigation of S&T as social institutions; science, technology and society, by contrast, analyzes the external relations of S&T with other institutions, such as law or politics. This essay reflects on the implications of this ambiguity for institutionalizing STS as a field of its own, drawing on the author’s experiences in building STS at two universities.

  16. Turning to ontology in STS? Turning to STS through ‘ontology’?

    NARCIS (Netherlands)

    van Heur, B.; Leydesdorff, L.; Wyatt, S.

    2013-01-01

    We examine the evidence for the claim of an ‘ontological turn’ in science and technology studies (STS). Despite an increase in references to ‘ontology’ in STS since 1989, we show that there has not so much been an ontological turn as multiple discussions deploying the language of ontology, consistin

  17. Turning to Ontology in STS? Turning to STS through ‘Ontology’

    NARCIS (Netherlands)

    van Heur, B.; Leydesdorff, L.; Wyatt, S.

    2012-01-01

    We examine the evidence for the claim of an ‘ontological turn’ in science and technology studies (STS). Despite an increase in references to ‘ontology’ in STS since 1989, we show that there has not so much been an ontological turn as multiple discussions deploying the language of ontology, consistin

  18. Science-Technology-Society (STS) and ChemCom Courses Versus College Chemistry Courses: Is There a Mismatch?

    Science.gov (United States)

    Sanger, Michael J.; Greenbowe, Thomas J.

    1996-06-01

    This opinion paper poses questions for the chemical education community to consider about the nature of college chemistry courses and the expected student prerequisites. It also explores the basis for a potential mismatch that may exist for students enrolled in a traditional college chemistry course who have had Science-Technology-Society (STS) or ChemCom courses as their only prior high school chemistry courses. Even though ChemCom and STS courses are not designed to prepare students for traditional college chemistry courses for science and engineering majors, there has been an increase in the number of ChemCom and STS students enrolling in these courses. As background, the general teaching approach of ChemCom and STS courses is discussed in terms of the behaviorist, cognitive, and constructivist learning theories. This article addresses the advantages and disadvantages of high school chemistry courses based on ChemCom and reviews the chemical education research comparing the effectiveness of ChemCom courses to traditional high school chemistry courses. The authors concluded that more research comparing the effect of these instructional methods on both traditional and alternative assessments is warranted.

  19. Teaching Science in the early years of primary education from the perspective STS: a work proposal facing the technological artifacts that guide the daily lives of students

    Directory of Open Access Journals (Sweden)

    Fabiane Fabri

    2013-05-01

    Full Text Available This article presents the results of a study with sixteen students of 2nd year 2nd cycle of the early years of the School Municipal Network of the city of Ponta Grossa in relation to the technological artifacts of everyday life. The study objective was to provide students with a scientific and technological literacy, an approach STS (Science, Technology and Society, starting from the main theme proposed by Resources Technology proposed by the National Curriculum in Sciences. The methodological approach was qualitative interpretative with participant observation. Among the organized activities can be mentioned: a visit to a recycling cooperative, interview with a scientist, presentations, mini-lessons for students, making folders, written productions, as well as a Technology Fair where students made presentations to the community school and parents. At the end of the study, it was noticed that students already could make reflections on social issues of scientific and technological development, but we emphasize the need to continue these discussions taking place during their school life, since it is believed that only this way the reflective stance on Science and Technology will be internalized. Please note that these are data of a dissertation in the Graduate Program in Teaching Science and Technology of the Technological Federal University of Paraná, Campus Ponta Grossa (UTFPR, Brazil.

  20. Dismantling boundaries in science and technology studies.

    Science.gov (United States)

    Dear, Peter; Jasanoff, Sheila

    2010-12-01

    The boundaries between the history of science and science and technology studies (STS) can be misleadingly drawn, to the detriment of both fields. This essay stresses their commonalities and potential for valuable synergy. The evolution of the two fields has been characterized by lively interchange and boundary crossing, with leading scholars functioning easily on both sides of the past/present divide. Disciplines, it is argued, are best regarded as training grounds for asking particular kinds of questions, using particular clusters of methods. Viewed in this way, history of science and STS are notable for their shared approaches to disciplining. The essay concludes with a concrete example--regulatory science--showing how a topic such as this can be productively studied with methods that contradict any alleged disciplinary divide between historical and contemporary studies of science.

  1. Spanish Secondary-School Science Teachers' Beliefs about Science-Technology-Society (STS) Issues

    Science.gov (United States)

    Vazquez-Alonso, Angel; Garcia-Carmona, Antonio; Manassero-Mas, Maria Antonia; Bennassar-Roig, Antoni

    2013-01-01

    This study analyzes the beliefs about science-technology-society, and other Nature of Science (NOS) themes, of a large sample (613) of Spanish pre- and in-service secondary education teachers through their responses to 30 items of the Questionnaire of Opinions on Science, Technology and Society. The data were processed by means of a multiple…

  2. Den Ontologiske Vending i Antropologi og Science and Technology Studies

    DEFF Research Database (Denmark)

    Winthereik, Brit Ross

    2015-01-01

    Formålet med artiklen er at afsøge, hvad videnskabs- og teknologi- studier eller Science and Technology Studies (STS) tilbyder humaniora og samfundsvidenskaberne med det nybrud, der er blevet kaldt den ontologiske vending. Med udgangspunkt i en beskrivelse af den onto- logiske vending i antropologi...

  3. Evaluation of Composite Structures Technologies for Application to NASA's Vision for Space Exploration (CoSTS)

    Science.gov (United States)

    Deo, Ravi; Wang, Donny; Bohlen, Jim; Fukuda, Cliff

    2008-01-01

    A trade study was conducted to determine the suitability of composite structures for weight and life cycle cost savings in primary and secondary structural systems for crew exploration vehicles, crew and cargo launch vehicles, landers, rovers, and habitats. The results of the trade study were used to identify and rank order composite material technologies that can have a near-term impact on a broad range of exploration mission applications. This report recommends technologies that should be developed to enable usage of composites on Vision for Space Exploration vehicles towards mass and life-cycle cost savings.

  4. STS goes to school: Spatial imaginaries of technology, knowledge and presence

    Directory of Open Access Journals (Sweden)

    Estrid Sørensen

    2007-09-01

    Full Text Available The following text presents a revised and extended version of the public defence of my Ph.D. thesis, which I presented at the Faculty of Social Sciences on 18th November 2005, Copenhagen University. The thesis applies and develops theoretical perspectives from Science and Technology Studies – especially Actor-Network Theory – on the empirical field of primary education. This field has not prior been approached by these theories. Based on ethnographic field studies the thesis presents and compares what I call spatial imaginaries of interactions of humans and learning materials in a traditional classroom and in a computer lab. The study describes and discusses the forms of knowledge and the forms of presence performed through these socio-material interactions. The study thus contributes a definition of materialities that takes the understanding of technology in education beyond the dominant humanist approach to schooling.

  5. Human Spaceflight Trajectory Operations: A Case Study from STS-132/ULF4

    Science.gov (United States)

    Cutri-Kohart, Rebecca; Browns, Ansley

    2010-01-01

    Prior to the launch of the STS-132/ULF4 mission, the International Space Station (ISS) Flight Control Team was alerted to the approach of a space debris with a predicted time of closest approach approximately 1 hr after Space Shuttle docking. As a result, the ISS team considered performing a collision avoidance maneuver prior to the Space Shuttle s approach. The purpose of this presentation will be to use this case study to illustrate best practices of the human spaceflight trajectory operations team. The presentation will begin with an overview of the roles of the real-time ISS and Space Shuttle trajectory flight control teams. Then, the STS-132/ULF4 case study will be used to illustrate the issues and lessons learned involved in performing Space Shuttle rendezvous maneuver planning and execution. Specific elements of the STS-132 Space Shuttle rendezvous maneuver profile that can be used to provide mission assurance in cases of trajectory uncertainty will be described and discussed. Additionally, this case study will be used to provide context for identifying lessons learned in an operational environment that requires technical and decision-making coordination between two control center teams with two potentially maneuvering space vehicles.

  6. Transferability of STS markers in studying genetic relationships of marvel grass (Dichanthium annulatum).

    Science.gov (United States)

    Saxena, Raghvendra; Chandra, Amaresh

    2011-11-01

    Transferability of sequence-tagged-sites (STS) markers was assessed for genetic relationships study among accessions of marvel grass (Dichanthium annulatum Forsk.). In total, 17 STS primers of Stylosanthes origin were tested for their reactivity with thirty accessions of Dichanthium annulatum. Of these, 14 (82.4%) reacted and a total 106 (84 polymorphic) bands were scored. The number of bands generated by individual primer pairs ranged from 4 to 11 with an average of 7.57 bands, whereas polymorphic bands ranged from 4 to 9 with an average of 6.0 bands accounts to an average polymorphism of 80.1%. Polymorphic information content (PIC) ranged from 0.222 to 0.499 and marker index (MI) from 1.33 to 4.49. Utilizing Dice coefficient of genetic similarity dendrogram was generated through un-weighted pairgroup method with arithmetic mean (UPGMA) algorithm. Further, clustering through sequential agglomerative hierarchical and nested (SAHN) method resulted three main clusters constituted all accessions except IGBANG-D-2. Though there was intermixing of few accessions of one agro-climatic region to another, largely groupings of accessions were with their regions of collections. Bootstrap analysis at 1000 scale also showed large number of nodes (11 to 17) having strong clustering (> 50). Thus, results demonstrate the utility of STS markers of Stylosanthes in studying the genetic relationships among accessions of Dichanthium.

  7. Novel mercury control technology for solid waste incineration: sodium tetrasulfide (STS) as mercury capturing agent.

    Science.gov (United States)

    Liu, Yangsheng; Xie, Shaodong; Li, Yaqiong; Liu, Yushan

    2007-03-01

    Traditional pollution control technologies are able to capture oxidized forms of mercury to some extent; however, they show low efficiency for the control of elemental mercury emissions. This study developed a novel mercury removal technology: injection of sodium tetrasulfide (Na2S4) dissolved in the sodium hydroxide (NaOH) solution in the spray-dryer system. The effects of flue gas temperature and Na2S4 level in flue gas on the mercury removal efficiency were investigated. Na2S4 was decomposed into Na2S (S2-) and elemental S (S0), which reacted with HgCl2 and elemental Hg (Hg0), and HgS was then formed. Under the optimized operation parameters, this technology can simultaneously remove over 88% of HgCl2 and more than 90% of Hg0 from a flue gas stream containing about 400 microg m(-3) Hg0 and 1200 microg m(-3) HgCl2. The increased flue gas temperature (>170 degrees C) and the decreased Na2S4-to-Hg mass ratio (S-Hg-R) (hospital-waste incinerator with a capability of 20 tons per day (TPD).

  8. Digital Libraries with Embedded Values: Combining Insights from LIS and Science and Technology Studies

    Science.gov (United States)

    Fleischmann, Kenneth R.

    2007-01-01

    In the digital age, libraries are increasingly being augmented or even replaced by information technology (IT), which is often accompanied by implicit assumptions of objectivity and neutrality, yet the field of science and technology studies (STS) has a long history of studying what values are embedded in IT and how they are embedded. This article…

  9. Digital Libraries with Embedded Values: Combining Insights from LIS and Science and Technology Studies

    Science.gov (United States)

    Fleischmann, Kenneth R.

    2007-01-01

    In the digital age, libraries are increasingly being augmented or even replaced by information technology (IT), which is often accompanied by implicit assumptions of objectivity and neutrality, yet the field of science and technology studies (STS) has a long history of studying what values are embedded in IT and how they are embedded. This article…

  10. Spanish Secondary-School Science Teachers' Beliefs About Science-Technology-Society (STS) Issues

    Science.gov (United States)

    Vázquez-Alonso, Ángel; García-Carmona, Antonio; Manassero-Mas, María Antonia; Bennàssar-Roig, Antoni

    2013-05-01

    This study analyzes the beliefs about science-technology-society, and other Nature of Science (NOS) themes, of a large sample (613) of Spanish pre- and in-service secondary education teachers through their responses to 30 items of the Questionnaire of Opinions on Science, Technology and Society. The data were processed by means of a multiple response model to generate the belief indices used as the bases for subsequent quantitative and qualitative analyses. Other studies have reported a negative profile of teachers' understanding in this area, but the diagnosis emerging from the present work is more complex. There was a mix of appropriate beliefs coexisting with others that are inappropriate on the topics analyzed. The overall assessment, however, is negative since clearly teachers need to have a better understanding of these questions. There were scant differences between the pre- and in-service teachers, and hence no decisive evidence that the practice of teaching contributes to improving the in-service teachers' understanding. These results suggest there is an urgent need to bring the initial and continuing education of science teachers up to date to improve their understanding of these topics of science curricula, and thus improve the teaching of science.

  11. Science-Technology-Society or Technology-Society-Science? Insights from an Ancient Technology

    Science.gov (United States)

    Lee, Yeung Chung

    2010-01-01

    Current approaches to science-technology-society (STS) education focus primarily on the controversial socio-scientific issues that arise from the application of science in modern technology. This paper argues for an interdisciplinary approach to STS education that embraces science, technology, history, and social and cultural studies. By employing…

  12. The functional organization of the left STS: a large scale meta-analysis of PET and fMRI studies of healthy adults

    Directory of Open Access Journals (Sweden)

    Einat eLiebenthal

    2014-09-01

    Full Text Available The superior temporal sulcus (STS in the left hemisphere is functionally diverse, with sub-areas implicated in both linguistic and non-linguistic functions. However, the number and boundaries of distinct functional regions remain to be determined. Here, we present new evidence, from meta-analysis of a large number of positron emission tomography (PET and functional magnetic resonance imaging (fMRI studies, of different functional specificity in the left STS supporting a division of its middle to terminal extent into at least three functional areas. The middle portion of the left STS stem (fmSTS is highly specialized for speech perception and the processing of language material. The posterior portion of the left STS stem (fpSTS is highly versatile and involved in multiple functions supporting semantic memory and associative thinking. The fpSTS responds to both language and non-language stimuli but the sensitivity to non-language material is greater. The horizontal portion of the left STS stem and terminal ascending branches (ftSTS display intermediate functional specificity, with the anterior ascending branch adjoining the supramarginal gyrus (fatSTS supporting executive functions and motor planning and showing greater sensitivity to language material, and the horizontal stem and posterior ascending branch adjoining the angular gyrus (fptSTS supporting primarily semantic processing and displaying greater sensitivity to non-language material. We suggest that the high functional specificity of the left fmSTS for speech is an important means by which the human brain achieves exquisite affinity and efficiency for native speech perception. In contrast, the extreme multi-functionality of the left fpSTS reflects the role of this area as a cortical hub for semantic processing and the extraction of meaning from multiple sources of information. Finally, in the left ftSTS, further functional differentiation between the dorsal and ventral aspect is warranted.

  13. Positioning the Field: STS Futures (INTRODUCTION

    Directory of Open Access Journals (Sweden)

    Steven Epstein

    2016-07-01

    Full Text Available The thematic collection entitled “Positioning the Field: STS Futures” consists of seven short articles that had their origins in a conference organized by the Science, Knowledge, and Technology Section of the American Sociological Association. These position papers blend autobiography, history, and STS analysis to advocate for specific future directions in STS scholarship.

  14. STS-Astro: Astronomy in focus of science, technology and society and analysis about the International Year of Astronomy 2009-Brazil

    Science.gov (United States)

    Ferreira, Orlando Rodrigues; Voelzke, Marcos Rincon

    2012-10-01

    This paper focuses on Science, Technology and Society around Astronomy an approach which authors call STS-Astro. It is considered that Astronomy is beyond the limits of Science itself, since it forwards to profound reflections on the own existence, predicated on the philosophical foundation of the Universe which is based on the anthropic principle. Subsequently, it discuss about the International Year of Astronomy 2009 in Brazil and their results. In 2003, Brazil, Italy and France sent a petition to the United Nations Educational, Scientific and Cultural Organization-UNESCO to consider 2009 as the International Year of Astronomy, on the occasion of 400 years of the first telescopic observations made in 1609 by Galileo Galilei (1568-1742). The International Year of Astronomy 2009 involved more than 148 countries and 815 million people, causing an unprecedented integration in the History between areas scientific, technological and humanities. Brazil had an outstanding performance, but even after a few years, numerous data in the country are still subject to studies and analyzes. The positive impacts on various sectors of the society have become permanent and aggregate actions in many institutions as schools, Universities, Observatories, Planetariums, Science Museums and the Astronomy Club, among others.

  15. A science teacher's reflections and knowledge growth about STS instruction after actual implementation

    Science.gov (United States)

    Tsai, Chin-Chung

    2002-01-01

    The major purpose of this study was to describe a science teacher's views of STS (Science-Technology-Society) instruction and what she acquired after implementing a two-semester STS-oriented science course in a high school of Taiwan. Upon analysis of the teacher's journals, interview data, concept maps, and relevant student questionnaire responses, this study revealed the following findings. The teacher believed that STS instruction was a potential way of practicing so-called constructivist teaching and her pedagogical knowledge about STS showed a considerable growth. As a result of STS instruction, her epistemological views of science seemed to progress toward more constructivist-oriented views of science. The heavy content load of Taiwan's national curriculum, regular cross-class standard tests, the lack of peers' or administrative support, the resource limitations in Chinese language, and the cultural impacts were identified as major factors that inhibited her implementation of STS instruction.

  16. Reframing and Articulating Socio-Scientific Classroom Discourses on Genetic Testing from an STS Perspective

    Science.gov (United States)

    Boerwinkel, Dirk Jan; Swierstra, Tsjalling; Waarlo, Arend Jan

    2014-01-01

    In recent decades, Science & Technology Studies (STS) have revealed the dynamic interaction between science and technology and society. Technology development is not an autonomous process and its artifacts are not socially inert. Society and technology shape each other. Technologies often have "soft impacts" in terms of unpredicted…

  17. Studies of the vestibulo-ocular reflex on STS 4, 5 and 6

    Science.gov (United States)

    Thornton, William E.; Pool, Sam L.; Moore, Thomas P.; Uri, John J.

    1988-01-01

    The vestibulo-ocular reflex (VOR) may be altered by weightlessness. Since this reflex plays a large role in visual stabilization, it was important to document any changes caused by space flight. This is a report on findings on STS-4 through 6 and is part of a larger study of neurosensory adaptation done on STS-4 through 8. Voluntary horizontal head oscillations at 1/3 Hz with amplitude of 30 deg right and left of center were recorded by a potentiometer and compared to eye position recorded by electroculography under the following conditions: eyes open, head fixed, tracking horizontal targets switched 0, 15, and 30 degrees right and left (optokinetic reflex - OKR - and calibration); eyes open and fixed on static external target with oscillation, (vestibulo ocular reflex, eyes closed - VOR EC); eyes open and wearing opaque goggles with target fixed in imagination (vestibulo-ocular reflex, eyes shaded - VOR ES); and eyes open and fixed on a head synchronized target with head oscillation (VOR suppression). No significant changes were found in voluntary head oscillation frequency or amplitude in those with (n=5), and without (n=3), space motion sickness (SMS), with phase of flight or test condition. Variations in head oscillation were too small to have produced detectable changes in test results.

  18. STS, symmetry and post-truth.

    Science.gov (United States)

    Lynch, Michael

    2017-08-01

    This essay takes up a series of questions about the connection between 'symmetry' in Science and Technology Studies (STS) and 'post-truth' in contemporary politics. A recent editorial in this journal by Sergio Sismondo argues that current discussions of 'post-truth' have little to do with conceptions of 'symmetry' or with concerns about 'epistemic democracy' in STS, while others, such as Steve Fuller and Harry Collins, insist that there are such connections. The present essay discusses a series of questions about the meaning of 'post-truth' and 'symmetry', and the connections of those concepts to each other and to 'epistemic democracy'. The essay ends with a series of other questions about STS and contemporary politics, and an invitation to further discussions.

  19. Emerging Technologies Integrating Technology into Study Abroad

    Science.gov (United States)

    Godwin-Jones, Robert

    2016-01-01

    "Ready access to travel and to technology-enhanced social networking (e.g., Facebook or Skype) has changed the nature of study abroad to the point where today's experiences are fundamentally different from those of earlier eras" (Kinginger, 2013a, p. 345). In addition to more travel options and greater technology availability, study…

  20. STS-107 Master Experiment List

    Science.gov (United States)

    2002-12-01

    A master list of the various experiments conducted aboard the STS-107 Space Mission is presented. The topics include: 1) Biology; 2) Earth and Space Sciences; 3) Physical Sciences; 4) Space Product Development; and 6) Technology Development.

  1. Beyond the Triple Helix: Framing STS in the Developmental Context

    Science.gov (United States)

    Amir, Sulfikar; Nugroho, Yanuar

    2013-01-01

    For the past three decades or so, the field of Science and Technology Studies (STS) has shed light on the interrelationship between modern science and technology, on one side, and contemporary society, on the other. A majority of this knowledge and insights are situated in the context of Western societies, or more precisely, in economically and…

  2. X-linked ichthyosis without STS deficiency: Clinical, genetical, and molecular studies

    Energy Technology Data Exchange (ETDEWEB)

    Robledo, R.; Melis, P.; Schillinger, E.; Siniscalco, M. [Istituto di Genetica Molecolare del, Trieste (Italy)] [and others

    1995-11-06

    We report on a Sardinian pedigree with congenital ichthyosis associated with normal levels of steroid sulfatase and a normal molecular pattern, as detectable with a cDNA probe for the steroid sulfatase (STS) gene. Though the pattern of transmission of the disease is consistent with X-linked recessive inheritance, this form of ichthyosis was found to segregate independently of genetic polymorphisms detected by probes of the region Xp22.3, where the STS locus has been mapped. The search for close genetic linkages with other polymorphic markers scattered along the entire X chromosome has so far been fruitless. For the time being, the main conclusion derived from these data is that STS deficiency is not a sine qua non for X-linked ichthyosis which may also result from a mutational event at an X-chromosomal site genetically unlinked to the STS locus. 16 refs., 4 figs.

  3. Evaluation of primary stability of innovated orthodontic miniscrew system (STS): An ex-vivo study

    Science.gov (United States)

    Seifi, Massoud

    2016-01-01

    Background Stability is determined as one of the requirements in use of Temporary Anchorage Devices (TAD) in orthodontics. Miniscrew has been a widely used Bone Anchor. Compared with mini-implant that necessitates osseointegration; mechanical retention is a determining factor for primary stability of miniscrew. Studies investigated various ways to increase primary stability. The aim of this study is to introduce a new configuration of miniscrew system which is believed to obtain more primary stability. Material and Methods Freshly ovine mandibles were cut in blocks. Twenty-seven miniscrews (diameter 1.6 × 8 mm; G2, Dual Top Anchor System, Jeil Medical, Seoul, Korea) were inserted in the blocks and divided in 2 experimental groups: single miniscrew and the innovated design “Seifi Twin Screw (STS)”. Primary stability was evaluated by Periotest “M”® device. Results Independent t-test showed a significant difference between 2 experimental groups in periotest evaluation (porthodontic anchorage procedures, miniscrews, temporary anchorage device. PMID:27398174

  4. Caring for Participation in STS

    DEFF Research Database (Denmark)

    Nielsen, Karen Dam

    2015-01-01

    In this short report from the EASST Conference 2014, I sketch a handful of presentations that engaged with ‘participation’. Two tracks, in particular, offered interesting analyses and conceptual experiments. The first track contained primarily empirically driven studies of ‘technologies of partic......In this short report from the EASST Conference 2014, I sketch a handful of presentations that engaged with ‘participation’. Two tracks, in particular, offered interesting analyses and conceptual experiments. The first track contained primarily empirically driven studies of ‘technologies...... of participation’ in (health) care and provided illustrations of the conceptual ambiguities and empirical implications that continue to make participation a problematic, yet highly relevant and intriguing STS-topic. The second track featured presentations that more explicitly contributed new analytical tools...

  5. Studies of the horizontal vestibulo-ocular reflex on STS 7 and 8

    Science.gov (United States)

    Thornton, William E.; Uri, John J.; Moore, Thomas P.; Pool, Sam L.

    1988-01-01

    Unpaced voluntary horizontal head oscillation was used to study the Vestibulo-Ocular Reflex (VOR) on Shuttle flights STS 7 and 8. Ten subjects performed head oscillations at 0.33 Hz + or - 30 deg amplitude under the followng conditions: VVOR (visual VOR), eyes open and fixed on a stationary target; VOR-EC, with eyes closed and fixed on the same target in imagination; and VOR-S (VOR suppression), with eyes open and fixed on a head-synchronized target. Effects of weightlessness, flight phase, and Space Motion Sickness (SMS) on head oscillation characteristics were examined. A significant increase in head oscillation frequency was noted inflight in subjects free from SMS. In subjects susceptible to SMS, frequency was reduced during their Symptomatic period. The data also suggest that the amplitude and peak velocity of head oscillation were reduced early inflight. No significant changes were noted in reflex gain or phase in any of the test conditions; however, there was a suggestion of an increase in VVOR and VOR-ES gain early inflight in asymptomatic subjects. A significant difference in VOR-S was found between SMS susceptible and non-susceptible subjects. There is no evidence that any changes in VOR characteristics contributed to SMS.

  6. Pesticides: a reflective socio-environmental proposal in chemistry teaching under a science, technology and society (sts perspective

    Directory of Open Access Journals (Sweden)

    Andréia Cristina Cunha Buffolo

    2015-03-01

    Full Text Available In this article we discuss the contribution of a didactic sequence with the theme “pesticides” in the articulation of chemistry knowledge and socio-environmental questions with public high school students. The above-mentioned sequence, prepared according to the presuppositions of an STS orientation and three pedagogical moments, was developed with twenty-two 2nd year students. The students that participated in the research, in addition to responding to a diagnostic questionnaire about the theme, were involved, during the pedagogical intervention, in group activities, reading and discussion of texts, problem resolution, research with local farmers, preparation of seminars and production of texts. All the moments of the intervention, which had the participation (verbal or nonverbal of the students, were recorded using a voice recorder and a field journal. The results revealed that the development of the didactic sequence widened the vision of the students as regards the social and environmental implications provoked by the inadequate use of pesticides, in addition to reflections and greater understanding about the theme, showing the importance of introducing socio-environmental questions in chemistry teaching with an STS perspective.

  7. Improving epistemological beliefs and moral judgment through an STS-based science ethics education program.

    Science.gov (United States)

    Han, Hyemin; Jeong, Changwoo

    2014-03-01

    This study develops a Science-Technology-Society (STS)-based science ethics education program for high school students majoring in or planning to major in science and engineering. Our education program includes the fields of philosophy, history, sociology and ethics of science and technology, and other STS-related theories. We expected our STS-based science ethics education program to promote students' epistemological beliefs and moral judgment development. These psychological constructs are needed to properly solve complicated moral and social dilemmas in the fields of science and engineering. We applied this program to a group of Korean high school science students gifted in science and engineering. To measure the effects of this program, we used an essay-based qualitative measurement. The results indicate that there was significant development in both epistemological beliefs and moral judgment. In closing, we briefly discuss the need to develop epistemological beliefs and moral judgment using an STS-based science ethics education program.

  8. A Study on Changes in Thickness of STS304 Material in the Progressive Drawing Process

    Directory of Open Access Journals (Sweden)

    Lee C.K.

    2017-06-01

    Full Text Available In the drawing process, the roundness of corners in the punch and the die are very important factors in determining the thicknesses of the product. The results clearly revealed that the thickness of a flange was increased and the thickness of body parts reduced when the roundness of the die entrance was small. The material thickness of the top part was decreased when the corner roundness of the punch was large. The smooth inflow of materials was found to have a significant effect on the thickness during the post-process. The compressive strength of STS 304 material exhibited a higher value compared with other processing methods. Moreover, we clearly observed the corner roundness of the punch and the die to be a very important factor for STS 304 materials.

  9. Feasibility studies and technological innovation

    DEFF Research Database (Denmark)

    2004-01-01

    The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives.......The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives....

  10. Feasibility studies and technological innovation

    DEFF Research Database (Denmark)

    2004-01-01

    The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives.......The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives....

  11. The Delphi Technique in Identifying Learning Objectives for the Development of Science, Technology and Society Modules for Palestinian Ninth Grade Science Curriculum

    Science.gov (United States)

    Abualrob, Marwan M. A.; Daniel, Esther Gnanamalar Sarojini

    2013-01-01

    This article outlines how learning objectives based upon science, technology and society (STS) elements for Palestinian ninth grade science textbooks were identified, which was part of a bigger study to establish an STS foundation in the ninth grade science curriculum in Palestine. First, an initial list of STS elements was determined. Second,…

  12. What is political in sub-politics? How Aristotle might help STS

    NARCIS (Netherlands)

    de Vries, G.

    2007-01-01

    Recent contributions by Collins, Evans, Jasanoff and Wynne to the discussion of how science and technology studies (STS) might contribute to understanding ‘subpolitics’ - the complex, expert knowledge-intensive and distributed political issues technological societies have to deal with - and involvem

  13. Cellular Phone Technology Comparisons Between China and Japan in the View of STS%STS视野下的中日手机技术

    Institute of Scientific and Technical Information of China (English)

    白欣; 杨舰

    2011-01-01

    Along with the cellular phone is gain grounded continuously, it brings huge influences to different societies as a kind of technology. It not only incarnates people's changes of the understanding to cellular phone, but also forms different social criterions with the usage in different societies. These influences make changes under the system environment with the technology developing. In the paper, the method of the sociology is used to analyze and explain the problem in the view of STS.%随着手机的不断普及,其对不同的社会都带来了巨大影响.这种影响不仅体现在人们对手机的认识发生着变化,还体现在手机在不同社会的使用形成了不同的社会规范,更体现在其技术发展的制度环境在发生改变.本文运用社会学的方法,从STS视角加以分析、解剖,更细致地说明了这一问题.

  14. Hydrogen energy systems technology study

    Science.gov (United States)

    Kelley, J. H.

    1975-01-01

    The paper discusses the objectives of a hydrogen energy systems technology study directed toward determining future demand for hydrogen based on current trends and anticipated new uses and identifying the critical research and technology advancements required to meet this need with allowance for raw material limitations, economics, and environmental effects. Attention is focused on historic production and use of hydrogen, scenarios used as a basis for projections, projections of energy sources and uses, supply options, and technology requirements and needs. The study found more than a billion dollar annual usage of hydrogen, dominated by chemical-industry needs, supplied mostly from natural gas and petroleum feedstocks. Evaluation of the progress in developing nuclear fusion and solar energy sources relative to hydrogen production will be necessary to direct the pace and character of research and technology work in the advanced water-splitting areas.

  15. Nuclear medicine technology study guide

    CERN Document Server

    Patel, Dee

    2011-01-01

    Nuclear Medicine Technology Study Guide presents a comprehensive review of nuclear medicine principles and concepts necessary for technologists to pass board examinations. The practice questions and content follow the guidelines of the Nuclear Medicine Technology Certification Board (NMTCB) and American Registry of Radiological Technologists (ARRT), allowing test takers to maximize their success in passing the examinations. The book is organized by sections of increasing difficulty, with over 600 multiple-choice questions covering all areas of nuclear medicine, including radiation safety; radi

  16. STS-based education in non-majors college biology

    Science.gov (United States)

    Henderson, Phyllis Lee

    The study explored the effect of the science-technology-society (STS) and traditional teaching methods in non-majors biology classes at a community college. It investigated the efficacy of the two methods in developing cognitive abilities at Bloom's first three levels of learning. It compared retention rates in classes taught in the two methods. Changes in student attitude relating to anxiety, fear, and interest in biology were explored. The effect of each method on grade attainment among men and women was investigated. The effect of each method on grade attainment among older and younger students was examined. Results of the study indicated that no significant differences, relating to retention or student attitude, existed in classes taught in the two methods. The study found no significant cognitive gains at Bloom's first three levels in classes taught in the traditional format. In the STS classes no significant gains were uncovered at Bloom's first level of cognition. Statistically significant gains were found in the STS classes at Bloom's second and third levels of cognition. In the classes taught in the traditional format no difference was identified in grade attainment between males and females. In the STS-based classes a small correlational difference between males and females was found with males receiving lower grades than expected. No difference in grade attainment was found between older and younger students taught in the traditional format. In the STS-based classes a small statistically significant difference in grade attainment was uncovered between older and younger students with older students receiving more A's and fewer C's than expected. This study found no difference in the grades of older, female students as compared to all other students in the traditionally taught classes. A weak statistically significant difference was discovered between grade attainment of older, female students and all other students in the STS classes with older, female

  17. New concepts of science and medicine in science and technology studies and their relevance to science education.

    Science.gov (United States)

    Wang, Hsiu-Yun; Stocker, Joel F; Fu, Daiwie

    2012-02-01

    Science education often adopts a narrow view of science that assumes the lay public is ignorant, which seemingly justifies a science education limited to a promotional narrative of progress in the form of scientific knowledge void of meaningful social context. We propose that to prepare students as future concerned citizens of a technoscientific society, science education should be informed by science, technology, and society (STS) perspectives. An STS-informed science education, in our view, will include the following curricular elements: science controversy education, gender issues, historical perspective, and a move away from a Eurocentric view by looking into the distinctive patterns of other regional (in this case of Taiwan, East Asian) approaches to science, technology, and medicine. This article outlines the significance of some major STS studies as a means of illustrating the ways in which STS perspectives can, if incorporated into science education, enhance our understanding of science and technology and their relationships with society. Copyright © 2011. Published by Elsevier B.V.

  18. Improving the Quality of Academic Services through Implementation of Internal Quality Assurance System in State Institute of Islamic Studies STS Jambi

    Science.gov (United States)

    Iskandar

    2017-01-01

    Implementation of quality assurance systems in IAIN STS Jambi implemented in early 2012, through the build system of internal quality assurance based on ISO 9001: 2008, in the process of implementation required strong reasons behind not growing atmosphere of academic standards of accreditation of study programs and institutions that are reflected…

  19. STS propellant scavenging systems study. Part 2, volume 2: Cost and WBS/dictionary

    Science.gov (United States)

    Williams, Frank L.

    1987-01-01

    Presented are the results of the cost analysis performed to update and refine the program phase C/D cost estimates for a Shuttle Derived Vehicle (SDV) tanker. The SDV tanker concept is an unmanned cargo vehicle incorporating a set of propellant tanks in the vehicle's payload module. The tanker will be used to meet the demand for a cryogenic propellant supply in orbit. The propellant tanks are delivered to a low Earth orbit or to an orbit in the vicinity of the Space Station. The intent of the economic analysis is to provide NASA with economic justification for the propellant scavenging concept that minimizes the total Space Transportation System life cycle cost. The detailed costs supporting the concept selection process are presented with descriptive text to aid in forecasting the phase C/D project and program planning. Included are all propellant scavenging costs as well as all SDV, STS and Orbital Maneuvering Vehicle charges to deliver the propellants to the Space Station.

  20. Study of metal corrosion using ac impedance techniques in the STS launch environment

    Science.gov (United States)

    Calle, Luz M.

    1989-01-01

    AC impedance measurements were performed to investigate the corrosion resistance of 19 alloys under conditions similar to the STS launch environment. The alloys were: Zirconium 702, Hastelloy C-22, Inconel 625, Hastelloy C-276, Hastelloy C-4, Inconel 600, 7Mo + N, Ferralium 255, Inco Alloy G-3, 20Cb-3, SS 904L, Inconel 825, SS 304LN, SS 316L, SS 317L, ES 2205, SS 304L, Hastelloy B-2, and Monel 400. AC impedance data were gathered for each alloy after one hour immersion time in each of the following three electrolyte solutions: 3.55 percent NaCl, 3.55 percent NaCl-0.1N HCl, and 3.55 percent NaCl-1.0N HCl. The data were analyzed qualitatively using the Nyquist plot and quantitatively using the Bode plot. Polarization resistance, Rp, values were obtained using the Bode plot. Zirconium 702 was the most corrosion resistant alloy in the three electrolytes. The ordering of the other alloys according the their resistance to corrosion varied as the concentration of hydrochloric acid in the electrolyte increased. The corrosion resistance of Zirconium 702 and Ferralium 255 increased as the concentration of hydrochloric acid in the electrolyte increased. The corrosion resistance of the other 17 alloys decreased as the concentration of the hyrdochloric acid in the electrolyte increased.

  1. Non-magnetic impurity effects in LiFeAs studied by STM/STS

    Science.gov (United States)

    Hanaguri, T.; Khim, Seung Hyun; Lee, Bumsung; Kim, Kee Hoon; Kitagawa, K.; Matsubayashi, K.; Mazaki, Y.; Uwatoko, Y.; Takigawa, M.; Takagi, H.

    2012-02-01

    Detecting the possible sign reversal of the superconducting gap in iron-based superconductors is highly non-trivial. Here we use non-magnetic impurity as a sign indicator. If the sign of the superconducting gap is positive everywhere in momentum space, in-gap bound state should not be observed near the impurity site unless it is magnetic. On the other hand, if there is a sign-reversal in the gap, even non-magnetic impurity may create in-gap bound state [1]. We performed STM/STS experiments on self-flux and Sn-flux grown LiFeAs crystals and examined the effects of Sn impurity. In STM images of Sn-flux grown samples, we found a ring-like object which may represent Sn. Tunneling spectrum taken at this defect site exhibits in-gap bound state. Together with flat-bottom superconducting gap observed far from the defects, sign-reversing s-wave gap is the most plausible gap structure in LiFeAs. [1] T. Kariyado and M. Ogata, JPSJ 79, 083704 (2010).

  2. Reframing and Articulating Socio-scientific Classroom Discourses on Genetic Testing from an STS Perspective

    Science.gov (United States)

    Boerwinkel, Dirk Jan; Swierstra, Tsjalling; Waarlo, Arend Jan

    2012-08-01

    In recent decades, Science & Technology Studies (STS) have revealed the dynamic interaction between science and technology and society. Technology development is not an autonomous process and its artifacts are not socially inert. Society and technology shape each other. Technologies often have `soft impacts' in terms of unpredicted side effects on individuals and society. Nevertheless, current societal discourse on technological innovations is still dominated by `hard impacts' such as quantifiable risks for health, safety and the environment. Furthermore, participants in socio-scientific discourses often underestimate their agency in influencing technological innovations, and at the same time overestimate their freedom of choice to use a technology. Past debates on technological innovations have shown how these debates were framed and often caught in fruitless discourse patterns or arguments. Interventionist STS research experiments with solutions to this problem. Assuming that an STS perspective is helpful in reframing and articulating socio-scientific classroom discourses, the case of genetic testing is used to explore this. An important positive `hard impact' of genetic testing is disease prevention. However, this is put into perspective by addressing `soft impacts' such as limited access to certain careers based on genetic risk and changes in the conception of health and the perception of responsibility for one's health. Discussion stoppers such as `playing God' or `We can't stop technological advancement' can be challenged through uncovering underlying assumptions. The use of narratives and future scenarios in classrooms seems fruitful in provoking imagination and engaging students in public debates on technological innovations.

  3. Danish Approaches in Social Studies of Technology

    DEFF Research Database (Denmark)

    Munch, Birgitte

    1995-01-01

    Danish contribution to a EU-COST A4 action analysing the emergence of social studies of technology, the Science-Technology-Society field and the 'new sociology' of technology in Europe.......Danish contribution to a EU-COST A4 action analysing the emergence of social studies of technology, the Science-Technology-Society field and the 'new sociology' of technology in Europe....

  4. Interface Methods Renegotiating relations between digital social research, STS and the sociology

    NARCIS (Netherlands)

    Marres, N.; Gerlitz, C.

    2015-01-01

    This paper introduces a distinctive approach to methods development in digital social research called ‘interface methods’. We begin by discussing various methodological confluences between digital media, social studies of science and technology (STS) and sociology. Some authors have posited signific

  5. Messy Shapes of Knowledge – STS Explores Informatization, New Media, and Academic Work

    NARCIS (Netherlands)

    Wouters, Paul; Scharnhorst, Andrea; Vann, Katie; Ratto, Matt; Hellsten, S; Fry, Jenny; Beaulieu, Anne; Hackett, Edward; Amsterdamska, Olga; Lynch, Michael; Wajcman, Judy

    2008-01-01

    Wouters, Paul, Katie Vann, Andrea Scharnhorst, Matt Ratto, Iina Hellsten, Jenny Fry, and Anne Beaulieu. 2008. “Messy Shapes of Knowledge – STS Explores Informatization, New Media, and Academic Work.” In The Handbook of Science and Technology Studies, edited by Edward Hackett, Olga Amsterdamska, Mich

  6. New technological localisms: a comparative analysis of two case studies

    Directory of Open Access Journals (Sweden)

    Darren J. Reed

    2014-01-01

    Full Text Available The following paper is concerned with elucidating an account of forms of new localism as they relate to the concept of ‘habitele’, a conceptual framework that helps us understand new forms of relatedness in the digitally mediated world. In doing this it will also reflect back on the concept and draw out as yet unconsidered elements based upon issues of fluidity, mobility, and what we will call ‘distal-locals’. The paper is centred around two case studies: the first is of a smart phone app, vouchercloud and details the way that the offering of money-off vouchers rests on particular notions of the local; while the second is of a environment organization who uses information technology to promote their activities. It is premised upon a history of work in the sociology of science and technology studies (STS and in particular a set of conceptual and methodologicalresources that helps to reveal the complexities of notions such as “the local”.

  7. Discursive Contextures of Science: Euro/West-Centrism and Science and Technology Studies

    Directory of Open Access Journals (Sweden)

    Amit Prasad

    2016-07-01

    Full Text Available Science and Technology Studies (STS by the very act of showing the multiplicity, contingency, and context-dependence of scientific knowledge and practice, provincialized modern science. Postcolonial interventions within STS have pursued this goal even further. Nevertheless, Euro/West-centrism continues to inflect not only scientific practices and lay imaginaries, but also sociological and historical analyses of sciences. In this article, drawing on my own training within STS – first under J.P.S. Uberoi, who was concerned with structuralist analysis of modernity and science, and thereafter under Andy Pickering, when we focused on material agency and temporal emergence and extensively engaged with Actor Network Theory - I emphasize the continuing role of Euro/West-centric discourses in defining the “self” and the “other” and in impacting epistemological and ontological interventions. More broadly, building on a concept of Michael Lynch’s, I call for excavation and analysis of discursive contextures of sciences. In the second section of the article, through a brief analysis of embryonic stem cell therapy in a clinic in Delhi, I show how with shifting transnational landscape of technoscience certain discursive contextures are being “deterritorialized” and left “stuttering.”

  8. STS-114: Engine Cut-Off Sensors Are a No-Go: Teaching Notes for NASA Case Study

    Science.gov (United States)

    Ransom, Khadijah S.; Johnson, Grace K.

    2013-01-01

    This case study format is intended to simulate the experience of facing the same difficult challenges and making the same critical decisions as managers, engineers, and scientists in the Space Shuttle Program. It has been designed for use in the classroom setting to help students develop skills related to decision-making. Students will read about the engine cut-off sensor anomaly which created challenges during the STS-114 mission and have the opportunity to make decisions as lead NASA engineers and Mission Management Team members. Included within this document are three case study presentation options - class discussion, group activity, and open-ended research. Please read the full case prior to in-class presentation to allow ample time for students' analysis and reflection, as well as to prepare additional questions. activities or exercises, material selection, etc. Depending upon the setting of your presentation and the number of participants, please choose at least one presentation format beforehand and plan accordingly. You may expect the following learning objectives by using the proposed formats. Learning Objectives: To enable students to experience the responsibilities of NASA management, engineers, and analysis; to discover possible procedures for investigating system anomalies; to become familiar with the liquid hydrogen low level engine cut-off sensor, including its function, connecting components, and location within the Space Shuttle; and to encourage critical analysis and stimulating discussion of Space Shuttle mission challenges.

  9. The inclusion of Science Technology Society topics in junior high school earth science textbooks

    Science.gov (United States)

    Fadhli, Fathi Ali

    2000-10-01

    The Science Technology Society (STS) approach is a major science education reform through which a scientifically literate citizen could be produced. The teaching of science through STS approach is centered on science and technology related issues and problems. The purpose of this study was to analyze five earth science textbooks published in the 1990's for their inclusion of twelve sciences and technology related issues and problems and for their inclusion of activities focused on STS. The selected earth science textbooks were; Scott Foresman, Heath, Holt, Merrill and Prentice-Hall. The targeted twelve issues and problems were identified by Bybee (1987), as the most important global science and technology related issues and problems. The numbers of full text pages devoted to each topic were determined by classifying each segment to one of the targeted topics. In addition, the numbers of STS activities were also determined by using criteria developed for this study. ANOVA statistical analyses and t-tests showed that the analyzed earth science textbooks treated the studied STS issues and problems and treated the STS activities differently. It was found that six of the studied issues and problems were constantly receiving more attention in all the analyzed earth science textbooks than the rest of the topics. These topics were; Air Quality and Atmosphere, Energy Shortages, Water Resources, Land Use, Hazardous Substances, and Mineral Resources. The overall results revealed that only an average of 8.82% of the text pages in all the analyzed earth science textbooks were devoted to STS topics and 5.49% of the activities in all the analyzed earth science textbooks were focused on STS topics. However, none of the activities focused on STS topics were presented in STS approach as defined by NSTA. The percentage of STS topics inclusion and the percentage of activities focused on STS topics were considered to be very low. Accordingly, the objectives and goals of STS approach

  10. How does materiality shape Childbirth? An explorative journey into evidence, childbirth practices & Science and Technology Studies

    DEFF Research Database (Denmark)

    Clausen, Jette Aaroe

    2010-01-01

    is Science and Technology Studies (STS). (Post) Actor Network Theory and postphenomenology is used as theoretical resources to help formulate questions to EBM, midwifery and birthing practices. A central theoretical resource is the Dutch Philosopher Annemarie Mol’s concept of mul-tiplicity. Mol argues...... that medical practices should be studied relationally, both humans as well as the non humans should be part of the analysis. As a conse-quence entities multiply; bodies and technologies be-come more than one but less than many. The aim of the dissertation is to produce a "productive feeling of astonishment......" for those positioned in evidence based medicine and midwifery about the use of technology in childbirth. The empirical material is developed during a field study at a maternity ward. Noisy stories about the use of epidurals and fetal monitors are used as resources. Noisy stories are stories that do...

  11. STM/STS study of the superconducting gap in SmFeAsO1-xFx

    Science.gov (United States)

    Kawashima, Yuki; Ichimura, Koichi; Katono, Kazuhiro; Kurosawa, Tohru; Oda, Migaku; Tanda, Satoshi; Kamihara, Yoichi; Hosono, Hideo

    2015-02-01

    We report an electron tunneling study of SmFeAsO1-xFx in the low doping region (x=0, 0.045, 0.046, 0.069) by low temperature UHV-STM/STS. Superconducting gaps are observed for each superconducting sample x=0.045 (Tc=12.9 K), x=0.046 (Tc=32.9 K) and x=0.069 (Tc=46.9 K). We obtained corresponding superconducting gap size of ΔSC = 9.5 ± 0.5 meV, 9.75±0.25 meV and 11±1 meV. While Tc increases, ΔSC is kept the same. This suggests that the effective attractive interaction is the same and that there is some mechanism that suppresses the superconductivity in the low doping region. On the other hand, similar gap structures were found in a non-superconducting sample with x=0 at 7.8 K. The obtained gap size was ΔN = 8.5 ± 1.5 meV, which is almost the same as the superconducting gap in the superconducting samples (x=0.045, 0.046, 0.069).

  12. Introduktion til STS

    DEFF Research Database (Denmark)

    Introduktion til STS er den første danske grundbog om dette nye felt. Bogen giver en pædagogisk introduktion til STS-studier og den forskelligartede og ofte vanskelige primærlitteratur, der kendetegner feltet. Forfatterne præsenterer blandt andet socialkonstruktivistiske tilgange til videnskab og...

  13. Conceptual Thermal Treatment Technologies Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Suer, A.

    1996-02-28

    This report presents a conceptual Thermal Treatment Technologies Feasibility Study (FS) for the Savannah River Site (SRS) focusing exclusively on thermal treatment technologies for contaminated soil, sediment, or sludge remediation projects.

  14. STS 128 - Christer Fuglesang

    CERN Multimedia

    2009-01-01

    STS-128 (ISS assembly flight 17A) is the next space shuttle mission to the International Space Station (ISS), planned for August 25, 2009. It is expected to use Space Shuttle Discovery. The primary payload will be the Multi-Purpose Logistics Module Leonardo. The mission is scheduled to include three spacewalks to remove and replace a materials processing experiment outside ESA's Columbus module and return an empty ammonia tank assembly As a graduate student, Fuglesang worked at CERN (the European Research Center on Particle Physics) in Geneva on the UA5 experiment, which studied proton-antiproton collisions. In 1988 he became a Fellow of CERN, where he worked on the CPLEAR experiment studying the subtle CP-violation of kaon particles. After a year he became a Senior Fellow and head of the particle identification subdetector........

  15. Citizen Management of Technology: A Science and Technology Studies approach to wireless networks and urban governance trough guifi.net

    Directory of Open Access Journals (Sweden)

    Yann Bona Beauvois

    2011-03-01

    Full Text Available Thesis presented at the Departament de Psicologia Social de la UAB by Yann Bona on December, 2010. Directed by Dr. Joan Pujol Tarrés.This dissertation explores the many ways in which citizens aiming to manage technologies in urban scape relate to public administrations. To accomplish it's task, it brings forward certain STS notions such as cosmopolitics, hybrid composition or technical democracy. On a general level, this thesis seeks an answer to Bruno Latour concern with what does it mean to conceive the technical as political?. We offer a set of conclusions based on what we choose to name a Sociotechnique of Public Policy .Our work relies on a case study focused on a free and open wireless network (located in Catalunya for the most part and called guifi.net that emerged from the desire and will of Civil Society wich, up to date, turns out to be the world's biggest free wireless network.

  16. STS-40 Mission Insignia

    Science.gov (United States)

    1990-01-01

    The STS-40 patch makes a contemporary statement focusing on human beings living and working in space. Against a background of the universe, seven silver stars, interspersed about the orbital path of Columbia, represent the seven crew members. The orbiter's flight path forms a double-helix, designed to represent the DNA molecule common to all living creatures. In the words of a crew spokesman, ...(the helix) affirms the ceaseless expansion of human life and American involvement in space while simultaneously emphasizing the medical and biological studies to which this flight is dedicated. Above Columbia, the phrase Spacelab Life Sciences 1 defines both the Shuttle mission and its payload. Leonardo Da Vinci's Vitruvian man, silhouetted against the blue darkness of the heavens, is in the upper center portion of the patch. With one foot on Earth and arms extended to touch Shuttle's orbit, the crew feels, he serves as a powerful embodiment of the extension of human inquiry from the boundaries of Earth to the limitless laboratory of space. Sturdily poised amid the stars, he serves to link scentists on Earth to the scientists in space asserting the harmony of efforts which produce meaningful scientific spaceflight missions. A brilliant red and yellow Earth limb (center) links Earth to space as it radiates from a native American symbol for the sun. At the frontier of space, the traditional symbol for the sun vividly links America's past to America's future, the crew states. Beneath the orbiting Shuttle, darkness of night rests peacefully over the United States. Drawn by artist Sean Collins, the STS 40 Space Shuttle patch was designed by the crewmembers for the flight.

  17. Pharmaceutical experiment aboard STS-67 mission

    Science.gov (United States)

    1995-01-01

    Astronaut William G. Gregory, pilot, works with a pharmaceutical experiment on the middeck of the Earth-orbiting Space Shuttle Endeavour during the STS-67 mission. Commercial Materials Dispersion Apparatus Instruments Technology Associates Experiments (CMIX-03) includes not only pharmaceutical, but also biotechnology, cell biology, fluids, and crystal growth investigation

  18. STS-107 Flight Day 5 Highlights

    Science.gov (United States)

    2003-01-01

    The fifth day of the STS-107 space mission begins with a presentation of The Six Space Technology and Research Students (STARS) program experiments aboard the Space Shuttle Columbia. Students from Australia, China, Israel, Japan, Lichtenstein and The United States send scientific experiments into space. The video includes the progress of experiments with various insects including silkworms, carpenter bees, ants, fish, and spiders.

  19. Technology geography: studying the relationships between technology, location and productivity

    NARCIS (Netherlands)

    Steenhuis, Harm-Jan; Bruijn, de Erik J.

    2006-01-01

    Operations management, international management, public policy and economic geography are scientific areas which come together in the study of international technology transfer. This study shows how each of these areas has its own central issues but also has specific parts that are relevant for rese

  20. The Politics of Humanitarian Technology

    DEFF Research Database (Denmark)

    Jacobsen, Katja Lindskov

    Med udgangspunkt i teori og koncepter fra Michel Foucaults værker,såvel som indsigter fra Science and Technology Studies (STS), udforsker bogen tre forskellige eksempler på humanitære aktørers brug af ny teknologi: vacciner, genmodificerede majs og biometrisk registreringsteknologi.......Med udgangspunkt i teori og koncepter fra Michel Foucaults værker,såvel som indsigter fra Science and Technology Studies (STS), udforsker bogen tre forskellige eksempler på humanitære aktørers brug af ny teknologi: vacciner, genmodificerede majs og biometrisk registreringsteknologi....

  1. Technological studies for plasmonic metasurfaces

    Science.gov (United States)

    Tomescu, Roxana; Kusko, Cristian; Dinescu, Adrian; Bita, Bogdan; Popescu, Marian

    2016-12-01

    This work will present the technological processes necessary to experimentally obtain plasmonic metasurfaces for developing flat optical components or diffractive optical elements (DOE) which have reflexion functionalities. This class of metasurfaces offers the possibility to manipulate the beam shape using an array of metallic nanoscale elements patterned on a substrate. The main feature of these structures is that one can manipulate the phase behavior by modifying some of the geometrical parameters of the nano-antennas in order to achieve the required phase shift values for the desired applications. The first important step in experimentally obtaining a plasmonic metasurface structures is the electron beam lithography (EBL) followed by the lift-off method. Due to the small sizes of the gold nano-antennas and tight periodicity of the array a number of impediments can emerge in experimentally obtaining such geometries which can be overcome by the parameter optimization of the employed technologies.

  2. Mobile Technologies Adoption: An Exploratory Case Study

    Institute of Scientific and Technical Information of China (English)

    CHU Yan; HUANG Lihua

    2008-01-01

    Based on the theory of task-technology fit and literature review of mobile technology acceptance, a research model is presented based on the features of mobile technologies and the actual usage of mobile applications in business environments, which identifies the characteristics of mobile applications and fitting tasks. An exploratory case is studied to understand how ABC Company, Hong Kong, utilizes mobile selling applications in their sales management process. This study gives some managerial suggestions for enterprises to successfully use mobile applications.

  3. Ciência, Tecnologia e Sociedade: a relevância do enfoque CTS para o contexto do Ensino Médio Science, Technology and Society: the importance of the STS view to high school context

    Directory of Open Access Journals (Sweden)

    Nilcéia Aparecida Maciel Pinheiro

    2007-04-01

    Full Text Available Ressalta-se a importância do enfoque Ciência, Tecnologia e Sociedade (CTS perante os questionamentos críticos e reflexivos acerca do contexto científico-tecnológico e social e, em especial, sua relevância para o Ensino Médio. Os pressupostos do movimento CTS têm se ampliado em toda sociedade brasileira, principalmente na área educacional. Dentro da proposta da Lei de Diretrizes e Bases da Educação Nacional (LDB, configurada nos Parâmetros Curriculares Nacionais do Ensino Médio (PCNEMs, percebe-se a relevância de aproximar o aluno da interação com a ciência e a tecnologia em todas as dimensões da sociedade, oportunizando a ele uma concepção ampla e social do contexto científico-tecnológico.We aim to highlight the importance of the STS view as a driving force of critical and reflexive questions about scientific, technological and social contexts, and also, to emphasize its relevance to High School. The STS movement has spread throughout our society and, specially, has gained more and more followers in the educational area. Inside the Guidelines Law of the National Education (LDB proposal, designed in the National Curriculum Parameters for Secondary Education (PCNEMS, we noticed the importance of bringing the student closer to the interaction between science and technology in societal dimensions, considering their reciprocal relation, giving the students a wide and social conception of the scientific and technological context.

  4. Impact of the Knowledge and Beliefs of Egyptian Science Teachers in Integrating a STS Based Curriculum: A Sociocultural Perspective

    Science.gov (United States)

    Mansour, Nasser

    2010-01-01

    The failure of much curriculum innovation has been attributed to the neglect by innovators of teachers' perceptions. The purpose of this study was to investigate inservice science teachers views of integrating Science, Technology and Society (STS) issues into the science curriculum and identify the factors that influence their decisions concerning…

  5. Engaging ArcForm in Science and Technology Studies

    DEFF Research Database (Denmark)

    Allsopp, Benjamin Brink

    not only the relations between the objects of various sciences and technologies, but simultaneously map the interrelations of these relations with social, political, and cultural objects. Furthermore in relation to the second way, the article describes how shared ArcForm maps may support dispersed STS...... predictable syntax that allows meaning to be stored as structured data supporting structured querying/filtering and the dynamic (and interactive) generation of perspectives on content. It also allows individual meanings to be the objects of digital management and online social curation. This article explores...

  6. The role of the IFG and pSTS in syntactic prediction: Evidence from a parametric study of hierarchical structure in fMRI.

    Science.gov (United States)

    Matchin, William; Hammerly, Christopher; Lau, Ellen

    2017-03-01

    Sentences encode hierarchical structural relations among words. Several neuroimaging experiments aiming to localize combinatory operations responsible for creating this structure during sentence comprehension have contrasted short, simple phrases and sentences to unstructured controls. Some of these experiments have revealed activation in the left inferior frontal gyrus (IFG) and posterior superior temporal sulcus (pSTS), associating these regions with basic syntactic combination. However, the wide variability of these effects across studies raises questions about this interpretation. In an fMRI experiment, we provide support for an alternative hypothesis: these regions underlie top-down syntactic predictions that facilitate sentence processing but are not necessary for building syntactic structure. We presented stimuli with three levels of structure: unstructured lists, two-word phrases, and simple, short sentences; and two levels of content: natural stimuli with real words and stimuli with open-class items replaced with pseudowords (jabberwocky). While both the phrase and sentence conditions engaged syntactic combination, our experiment only encouraged syntactic prediction in the sentence condition. We found increased activity for both natural and jabberwocky sentences in the left IFG (pars triangularis and pars orbitalis) and pSTS relative to unstructured word lists and two-word phrases, but we did not find any such effects for two-word phrases relative to unstructured word lists in these areas. Our results are most consistent with the hypothesis that increased activity in IFG and pSTS for basic contrasts of structure reflects syntactic prediction. The pars opercularis of the IFG showed a response profile consistent with verbal working memory. We found incremental effects of structure in the anterior temporal lobe (ATL), and increased activation only for sentences in the angular gyrus (AG)/temporal-parietal junction (TPJ) - both regions showed these effects for

  7. Subsidy of a transforming pedagogical practice: contribution of STS view

    Directory of Open Access Journals (Sweden)

    Marcia Regina Carletto

    2011-04-01

    Full Text Available This study aims to enrich the reflection concerning the insertion of the STS (Society, Technology and Science approach and its implications in Science teaching. The methodology used was qualitative research of interpretative nature and occurred during the development of the subject technological principles in cooperation with Science, Math, Portuguese, History and Sociology. The research had as target students from five groups of High School from a public teaching Institution in Ponta Grossa - PR. The problem question that guided the research and served as background for the presentation of this text, concerns the possibilities of using the STS focus for the implementation of a differentiated teaching. The methodological options were defined based on participative planning, a theoretical reflection and limitations which had been found. The results relate to qualitative contributions to the teaching practice and to the teaching-learning process on Science teaching, such as: curricular integration, high level of motivation and students participation, improvement of analysis capability, argumentation and intervention, deeper understanding of the Science nature, the technological scientific process and its social and environmental repercussion.

  8. STS-121 Insignia

    Science.gov (United States)

    2005-01-01

    The STS-121 patch depicts the Space Shuttle docked with the International Space Station (ISS) in the foreground, overlaying the astronaut symbol with three gold columns and a gold star. The ISS is shown in the configuration that it was during the STS-121 mission. The background shows the nighttime Earth with a dawn breaking over the horizon. STS-121, ISS mission ULF1.1, was the final Shuttle Return to Flight test mission. This utilization and logistics flight delivered a multipurpose logistics module (MPLM) to the ISS with several thousand pounds of new supplies and experiments. In addition, some new orbital replacement units (ORUs) were delivered and stowed externally on the ISS on a special pallet. These ORUs are spares for critical machinery located on the outside of the ISS. During this mission the crew also carried out testing of Shuttle inspection and repair hardware, as well as evaluated operational techniques and concepts for conducting on-orbit inspection and repair.

  9. Science-Technology-Society literacy in college non-majors biology: Comparing problem/case studies based learning and traditional expository methods of instruction

    Science.gov (United States)

    Peters, John S.

    This study used a multiple response model (MRM) on selected items from the Views on Science-Technology-Society (VOSTS) survey to examine science-technology-society (STS) literacy among college non-science majors' taught using Problem/Case Studies Based Learning (PBL/CSBL) and traditional expository methods of instruction. An initial pilot investigation of 15 VOSTS items produced a valid and reliable scoring model which can be used to quantitatively assess student literacy on a variety of STS topics deemed important for informed civic engagement in science related social and environmental issues. The new scoring model allows for the use of parametric inferential statistics to test hypotheses about factors influencing STS literacy. The follow-up cross-institutional study comparing teaching methods employed Hierarchical Linear Modeling (HLM) to model the efficiency and equitability of instructional methods on STS literacy. A cluster analysis was also used to compare pre and post course patterns of student views on the set of positions expressed within VOSTS items. HLM analysis revealed significantly higher instructional efficiency in the PBL/CSBL study group for 4 of the 35 STS attitude indices (characterization of media vs. school science; tentativeness of scientific models; cultural influences on scientific research), and more equitable effects of traditional instruction on one attitude index (interdependence of science and technology). Cluster analysis revealed generally stable patterns of pre to post course views across study groups, but also revealed possible teaching method effects on the relationship between the views expressed within VOSTS items with respect to (1) interdependency of science and technology; (2) anti-technology; (3) socioscientific decision-making; (4) scientific/technological solutions to environmental problems; (5) usefulness of school vs. media characterizations of science; (6) social constructivist vs. objectivist views of theories; (7

  10. Advanced Cogeneration Technology Economic Optimization Study (ACTEOS)

    Science.gov (United States)

    Nanda, P.; Ansu, Y.; Manuel, E. H., Jr.; Price, W. G., Jr.

    1980-01-01

    The advanced cogeneration technology economic optimization study (ACTEOS) was undertaken to extend the results of the cogeneration technology alternatives study (CTAS). Cost comparisons were made between designs involving advanced cogeneration technologies and designs involving either conventional cogeneration technologies or not involving cogeneration. For the specific equipment cost and fuel price assumptions made, it was found that: (1) coal based cogeneration systems offered appreciable cost savings over the no cogeneration case, while systems using coal derived liquids offered no costs savings; and (2) the advanced cogeneration systems provided somewhat larger cost savings than the conventional systems. Among the issues considered in the study included: (1) temporal variations in steam and electric demands; (2) requirements for reliability/standby capacity; (3) availability of discrete equipment sizes; (4) regional variations in fuel and electricity prices; (5) off design system performance; and (6) separate demand and energy charges for purchased electricity.

  11. STS-107 Columbia sits inside an protective tent in VAB

    Science.gov (United States)

    2002-01-01

    KENNEDY SPACE CENTER, FLA. -- Columbia sits inside an protective tent used to keep out moisture. The orbiter is next scheduled to fly on mission STS-107 no earlier than Nov. 29. STS-107 is a research mission. The payload includes the Hitchhiker Bridge, a carrier for the Fast Reaction Experiments Enabling Science, Technology, Applications and Research (FREESTAR) that incorporates eight high priority secondary attached shuttle experiments, plus the SHI Research Double Module (SHI/RDM), also known as SPACEHAB.

  12. Studies of technology in prehistoric archaeology

    Directory of Open Access Journals (Sweden)

    Vitezović Selena

    2011-01-01

    Full Text Available Technology studies have always been the most important focus of archaeology, as a science which analyzes human past through the study of material culture. To say that something is technological in archaeology, means to put the concept of technology in the centre of theoretical studies, and to study not only the form of the object, but also the entire sequence of technological factors, from raw material choice, mode of use, up to the reasons for abandonment. The concept of technology in anthropology and archaeology is based on the original meaning of the word τεχνη in ancient Greek, meaning the skill, i. e., to study how something is being done. Such a concept of technology as a skill or mode of doing something was for the first time outlined by the French anthropologist Marcel Mauss, whose starting point was that every technological statement was at the same time social or cultural statement and that technological choices have social foundations. Pierre Lemonnier further developed the anthropology of technology, focusing on the question of technological choices, as well as numerous other anthropologists. In archaeology, the most important contribution to the study of technology was the work of André Leroi-Gourhan, who created the concept of chaîne opératoire, as an analytical tool for studying the mode of creating, using and discarding an artefact, starting with raw material acquisition, mode of manufacture, final form, use (including caching, breaking and repairing up to the final discarding. It is not only about reconstructing the algorithmic sequence of operations in creating one object, but it is a complex analysis of operational chain within one society which includes the analysis of technological choices. The analyses of technologies today include a variety of different approaches, most of them with emphasis on the cultural and social aspects of technology. The analysis of bone industry in the Early and Middle Neolithic in central

  13. New Technologies for Studying Biofilms.

    Science.gov (United States)

    Franklin, Michael J; Chang, Connie; Akiyama, Tatsuya; Bothner, Brian

    2015-08-01

    Bacteria have traditionally been studied as single-cell organisms. In laboratory settings, aerobic bacteria are usually cultured in aerated flasks, where the cells are considered essentially homogenous. However, in many natural environments, bacteria and other microorganisms grow in mixed communities, often associated with surfaces. Biofilms are comprised of surface-associated microorganisms, their extracellular matrix material, and environmental chemicals that have adsorbed to the bacteria or their matrix material. While this definition of a biofilm is fairly simple, biofilms are complex and dynamic. Our understanding of the activities of individual biofilm cells and whole biofilm systems has developed rapidly, due in part to advances in molecular, analytical, and imaging tools and the miniaturization of tools designed to characterize biofilms at the enzyme level, cellular level, and systems level.

  14. Creating Educational Technology Curricula for Advanced Studies in Learning Technology

    Directory of Open Access Journals (Sweden)

    Minoru Nakayama

    2016-08-01

    Full Text Available Curriculum design and content are key factors in the area of human resource development. To examine the possibility of using a collaboration of Human Computer Interaction (HCI and Educational Technology (ET to develop innovative improvements to the education system, the curricula of these two areas of study were lexically analyzed and compared. As a further example, the curriculum of a joint course in HCI and ET was also lexically analyzed and the contents were examined. These analyses can be used as references in the development of human resources for use in advanced learning environments.

  15. Tokamak Engineering Technology Facility scoping study

    Energy Technology Data Exchange (ETDEWEB)

    Stacey, W.M. Jr.; Abdou, M.A.; Bolta, C.C.

    1976-03-01

    A scoping study for a Tokamak Engineering Technology Facility (TETF) is presented. The TETF is a tokamak with R = 3 m and I/sub p/ = 1.4 MA based on the counterstreaming-ion torus mode of operation. The primary purpose of TETF is to demonstrate fusion technologies for the Experimental Power Reactor (EPR), but it will also serve as an engineering and radiation test facility. TETF has several technological systems (e.g., superconducting toroidal-field coil, tritium fuel cycle, impurity control, first wall) that are prototypical of EPR.

  16. Communication technologies in the study environment

    DEFF Research Database (Denmark)

    Thorhauge, Anne Mette

    2012-01-01

    technologies are integrated into organisational structures and practices on campus. This involves a comparison between course management systems on the one hand and students’ personal media (mobile phones, e-mails) on the other hand, with regard to how these are used on campus. On the basis of this analysis, I......In this article, I will analyse and discuss two qualitative case studies concerning ICT in the study environment at the University of Copenhagen, Denmark. I will place special focus on the way in which organisational perspectives as well as technological affordances shape how communication...... will argue that the ways in which these technologies are used reflects two different perspectives on the interplay between communication technology and organisational structure: organisational structure as an anticipation of communication patterns implied in course management system’s design...

  17. STS study of TiO2 film and Pt-deposited TiO2 film in air

    Institute of Scientific and Technical Information of China (English)

    Zhang Min; Jin Zhensheng

    2004-01-01

    Direct investigation of the electronic structure of catalyst surfaces on the near-atomic scale in general has not been impossible in the past. However, with the advent of the scanning tunneling microscope (STM), the opportunity arises for incorporating the scanning tunneling spectroscopy (STS) for correlation in-situ surface electronic structure with topography on a sub-nanometer scale. In this paper, we report the STS results of thin film TiO2 and Pt-deposited TiO2 annealed at 450℃. It was found that the TiO2 semiconductor changes from n-type to p-type after Pt deposition.Fig. 1 shows the surface electronic property (Ⅰ-Ⅴ curve) of thin TiO2 film measured in air by STS. A steep descent of the anodic tunneling current at ca.- 1.0 Ⅴ and a rapid ascent of cathodic tunneling current at ca. +2.0V. The zero bias represents the Fermi level (Ef). Ef is situated at the Ecb side indicating that the thin TiO2 film possesses the same band gap as that of bulk TiO2 phase ( Egs =3.0 to 3.2 eV). For the sample of Pt-deposited TiO2 film, Pt/(Pt+Ti+O) atomic ratio≈0.2, which indicates that the surface of TiO2 film is partly covered by Pt particles, and there are two types of Ⅰ-Ⅴ curves to be detected. One of them (Fig.2a)is attributed to the electronic property of TiO2, which has same Egs as that shown in Fig. 1. However, the Ef is transferred to valence side (△≈1eV). This phenomenon hints that TiO2 is doped by an impurity which can introduce h+ into TiO2 lattice.Such a type of defects may be described by Ti1-xPtxO2(h )2x, here Pt+2 as a substitutional site of Ti+4. Fig.2b is the Ⅰ-Ⅴ curve of a Pt particle situated on a TiO2 particle contained Ti1-xPtxO2(h )2x.

  18. Social technologies : Cross-disciplinary reflections on technologies in and from the social sciences Introduction

    NARCIS (Netherlands)

    Derksen, Maarten; Vikkelso, Signe; Beaulieu, Anne

    2012-01-01

    In this introduction, we explore the relevance to critical psychology of the ideas about technology that have come from science and technology studies (STS), which we argue allow a new look at a classic theme in critical approaches in psychology. Rather than seeing psychical and social reality as ob

  19. STS-47 Crew Briefing

    Science.gov (United States)

    1992-01-01

    The crew of STS-47, Commander Robert L. Gibson, Pilot Curtis L. Brown, Payload Commander Mark C. Lee, Mission Specialists N. Jan Davis, Jay Apt, and Mae C. Jemison, and Payload Specialist Mamoru Mohri answer questions from the press about the upcoming Endeavour mission and the crew's personal views of the mission.

  20. STS-8 Mission Insignia

    Science.gov (United States)

    1983-01-01

    The eighth flight of the United States Space Transportation System (STS) is represented by eight stars of the constellation Aquila, The Eagle. The Space Shuttle Challenger is pictured affixed the external tank while leaving Earth's atmosphere. Surrounding the outside boder are the names of the crew members.

  1. A Study on the Nuclear Technology Policy

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. J.; Lim, C. Y.; Yang, M. H. (and others)

    2008-03-15

    The objective of the study was to make policy-proposes for enhancing the effectiveness and efficiency of national nuclear technology development programs. To do this, changes of international nuclear energy policy environment and trends of nuclear technology development was surveyed and analyzed. In the viewpoint of analysis of the changes in the global policy environment surrounding nuclear technology development and development of national nuclear R and D strategy, this study (1) analyzed trends of nuclear technology policies and (2) developed the nuclear energy R and D innovation strategies. To put it in more detail, each subject was further explored as follows; (1) themes to analyze trends of nuclear policies: nuclear Renaissance and forecast for nuclear power plant, International collaboration for advanced nuclear technologies in GIF, INPRO and I-NERI, The present situation and outlook for world uranium market (2) themes to develop of nuclear energy R and D innovation strategies: The mid-term strategy plan of the KAERI, The technological innovation case of the KAERI.

  2. Communication technologies in the study environment

    DEFF Research Database (Denmark)

    Thorhauge, Anne Mette

    2012-01-01

    In this article, I will analyse and discuss two qualitative case studies concerning ICT in the study environment at the University of Copenhagen, Denmark. I will place special focus on the way in which organisational perspectives as well as technological affordances shape how communication...... and implementation as well as organisational structure as a product of the use of personal media...

  3. Live Worms Found Amid STS-107 Debris

    Science.gov (United States)

    2003-01-01

    NASA Project Manager Fred Ahmay holds a Biological Research in Canisters (BRIC) container in which C. elegans nemotodes (round worms) were found. The container was part of a middeck experiment that was among Columbia's debris recovered in East Texas. The worms were found alive after flying on Columbia's last mission, STS-107. The experiment was designed to verify a new synthetic nutrient solution for an International Space Station 'model' specimen planned to be used extensively for ISS gene expression studies and was sponsored by the NASA Ames Research Center. For more information on STS-107, please see GRIN Columbia General Explanation

  4. Preservice Science Teachers' Views on Science-Technology-Society

    Science.gov (United States)

    Dikmentepe, Emel; Yakar, Zeha

    2016-01-01

    The aim of this study is to investigate the views of pre-service science teachers on Science-Technology-Society (STS). In the research, a descriptive research method was used and data were collected using the Views on Science-Technology-Society (VOSTS) Questionnaire. In general, the results of this study revealed that pre-service science teachers…

  5. Opening the Black Box of NOS: Or Knowing How to Go on with Science Education, Wittgenstein, and STS in a Precarious World

    Science.gov (United States)

    Alsop, Steve; Gardner, Sam

    2017-01-01

    In this response essay we offer some critical comments on the nature of science (NOS) and thereby hopefully extend Hodson and Wong's (2017, this issue) argument concerning "understanding scientific practice." Drawing on selected theorising in science and technology studies (STS), we argue that NOS needs to take much more seriously…

  6. Ethics in technological culture: a programmatic proposal for a pragmatist approach.

    Science.gov (United States)

    Keulartz, Jozef; Schermer, Maartje; Korthals, Michiel; Swierstra, Tsjalling

    2004-01-01

    Neither traditional philosophy nor current applied ethics seem able to cope adequately with the highly dynamic character of our modern technological culture. This is because they have insufficient insight into the moral significance of technological artifacts and systems. Here, much can be learned from recent science and technology studies (STS). They have opened up the black box of technological developments and have revealed the intimate intertwinement of technology and society in minute detail. However, while applied ethics is characterized by a certain "technology blindness," the most influential approaches within STS show a "normative deficit" and display on agnostic or even antagonistic attitude toward ethics. To repair the blind spots of both applied ethics and STS, the authors sketch the contours of a pragmatist approach. They will explore the tasks and tools of a pragmatist ethics and pay special attention to the exploration of future worlds disclosed and shaped by technology and the management of deep value conflicts inherent in a pluralistic society.

  7. Study of Faculty and Information Technology, 2014

    Science.gov (United States)

    Dahlstrom, Eden; Brooks, D. Christopher

    2014-01-01

    In this inaugural year of the faculty technology study, EDUCAUSE Center for Analysis and Research (ECAR) partnered with 151 college/university sites yielding responses from 17,451 faculty respondents across 13 countries. The findings are exploratory in nature, as they cover new ground to help us tell a more comprehensive story about technology…

  8. Aerospace Mechanisms and Tribology Technology: Case Study

    Science.gov (United States)

    Miyoshi, K.

    1999-01-01

    This paper focuses attention on tribology technology practice related to vacuum tribology. A case study describes an aspect of a real problem in sufficient detail for the engineer and scientist to understand the tribological situation and the failure. The nature of the problem is analyzed and the tribological properties are examined.

  9. Aerospace Mechanisms and Tribology Technology: Case Studies

    Science.gov (United States)

    Miyoshi, Kazuhisa

    1999-01-01

    This chapter focuses attention on tribology technology practice related to vacuum tribology and space tribology. Two case studies describe aspects of real problems in sufficient detail for the engineer and the scientist to understand the tribological situations and the failures. The nature of the problems is analyzed and the range of potential solutions is evaluated. Courses of action are recommended.

  10. STS-83 Mission Insignia

    Science.gov (United States)

    1997-01-01

    The crew patch for NASA's STS-83 mission depicts the Space Shuttle Columbia launching into space for the first Microgravity Sciences Laboratory 1 (MSL-1) mission. MSL-1 investigated materials science, fluid dynamics, biotechnology, and combustion science in the microgravity environment of space, experiments that were conducted in the Spacelab Module in the Space Shuttle Columbia's cargo bay. The center circle symbolizes a free liquid under microgravity conditions representing various fluid and materials science experiments. Symbolic of the combustion experiments is the surrounding starburst of a blue flame burning in space. The 3-lobed shape of the outermost starburst ring traces the dot pattern of a transmission Laue photograph typical of biotechnology experiments. The numerical designation for the mission is shown at bottom center. As a forerunner to missions involving International Space Station (ISS), STS-83 represented the hope that scientific results and knowledge gained during the flight will be applied to solving problems on Earth for the benefit and advancement of humankind.

  11. AFCI Safeguards Enhancement Study: Technology Development Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Leon E.; Dougan, A.; Tobin, Stephen; Cipiti, B.; Ehinger, Michael H.; Bakel, A. J.; Bean, Robert; Grate, Jay W.; Santi, P.; Bryan, Steven; Kinlaw, M. T.; Schwantes, Jon M.; Burr, Tom; Lehn, Scott A.; Tolk, K.; Chichester, David; Menlove, H.; Vo, D.; Duckworth, Douglas C.; Merkle, P.; Wang, T. F.; Duran, F.; Nakae, L.; Warren, Glen A.; Friedrich, S.; Rabin, M.

    2008-12-31

    The Advanced Fuel Cycle Initiative (AFCI) Safeguards Campaign aims to develop safeguards technologies and processes that will significantly reduce the risk of proliferation in the U.S. nuclear fuel cycle of tomorrow. The Safeguards Enhancement Study was chartered with identifying promising research and development (R&D) directions over timescales both near-term and long-term, and under safeguards oversight both domestic and international. This technology development roadmap documents recognized gaps and needs in the safeguarding of nuclear fuel cycles, and outlines corresponding performance targets for each of those needs. Drawing on the collective expertise of technologists and user-representatives, a list of over 30 technologies that have the potential to meet those needs was developed, along with brief summaries of each candidate technology. Each summary describes the potential impact of that technology, key research questions to be addressed, and prospective development milestones that could lead to a definitive viability or performance assessment. Important programmatic linkages between U.S. agencies and offices are also described, reflecting the emergence of several safeguards R&D programs in the U.S. and the reinvigoration of nuclear fuel cycles across the globe.

  12. Practice Theory and Pragmatism in Science & Technology Studies

    DEFF Research Database (Denmark)

    Buch, Anders

    2015-01-01

    as for example Rouse, Schatzki and Reckwitz refrain from including the pragmatist legacy in their writings. This question would probably either be entirely speculative or maybe even not very interesting? Rather, I want to explore what these two apparently similar ways of theorizing do to the study of science...... to the normative evaluation of action, I show that the two intellectual traditions have much in common when it comes to what they do to STS studies. After this introduction to practice theory, my paper will proceed in the following steps. Firstly, I will briefly survey practice theoretical and pragmatist...

  13. Carbon Dioxide Reduction Technology Trade Study

    Science.gov (United States)

    Jeng, Frank F.; Anderson, Molly S.; Abney, Morgan B.

    2011-01-01

    For long-term human missions, a closed-loop atmosphere revitalization system (ARS) is essential to minimize consumables. A carbon dioxide (CO2) reduction technology is used to reclaim oxygen (O2) from metabolic CO2 and is vital to reduce the delivery mass of metabolic O2. A key step in closing the loop for ARS will include a proper CO2 reduction subsystem that is reliable and with low equivalent system mass (ESM). Sabatier and Bosch CO2 reduction are two traditional CO2 reduction subsystems (CRS). Although a Sabatier CRS has been delivered to International Space Station (ISS) and is an important step toward closing the ISS ARS loop, it recovers only 50% of the available O2 in CO2. A Bosch CRS is able to reclaim all O2 in CO2. However, due to continuous carbon deposition on the catalyst surface, the penalties of replacing spent catalysts and reactors and crew time in a Bosch CRS are significant. Recently, technologies have been developed for recovering hydrogen (H2) from Sabatier-product methane (CH4). These include methane pyrolysis using a microwave plasma, catalytic thermal pyrolysis of CH4 and thermal pyrolysis of CH4. Further, development in Sabatier reactor designs based on microchannel and microlith technology could open up opportunities in reducing system mass and enhancing system control. Improvements in Bosch CRS conversion have also been reported. In addition, co-electrolysis of steam and CO2 is a new technology that integrates oxygen generation and CO2 reduction functions in a single system. A co-electrolysis unit followed by either a Sabatier or a carbon formation reactor based on Bosch chemistry could improve the overall competitiveness of an integrated O2 generation and CO2 reduction subsystem. This study evaluates all these CO2 reduction technologies, conducts water mass balances for required external supply of water for 1-, 5- and 10-yr missions, evaluates mass, volume, power, cooling and resupply requirements of various technologies. A system

  14. Situating STS and Thinking Ahead

    Directory of Open Access Journals (Sweden)

    Adele E. Clarke

    2016-07-01

    Full Text Available This essay sketches some of the broader sociopolitical and academic conditions of possibility at the time of the founding of the SKAT Section of the American sociological Association, noting the diversity of concerned groups and the affordances of epistemological diversity. I situate my own development as an early STS scholar, and discuss the growing salience of (postcolonial STS and concerns regarding current STS training and publishing.

  15. The impact of a STS/Constructivist learning approach on the beliefs and attitudes of preservice science teachers

    Science.gov (United States)

    Akcay, Hakan

    The purpose of this study was to determine the impact of an Science-Technology-Society (STS) course for preservice science teachers. The course was designed to change not only preservice science teachers' attitudes toward science, scientists and science courses, but also the awareness and use of STS/Constructivist approaches in teaching. It also focuses on changes in preservice science teachers regarding the effectiveness of an STS/Constructivist learning environment. Both qualitative and quantitative research methods were used with and a one-group pretest-posttest design. The instruments were administered to the preservice science teachers at the beginning of the semester as pre-tests and again at the end of the semester as post-tests. Data gathered from pre- and post-administration were analyzed for each of the instruments that provide answers to the research questions. The sample consists of forty-one pre-service science teachers who were enrolled in the Societal & Educational Applications of Biological Concepts course during the spring semester of the 2004 and 2005 academic years at the University of Iowa. The major findings for the study include the following: (1) Preservice science teachers showed significantly growth over the semester in their perceptions concerning STS/Constructivism, beliefs about science teaching and learning, and attitudes toward science and technology, and their implications for society. These significant changes were not affected by gender nor grade (elementary vs secondary) level. (2) Preservice science teachers gain in understanding of how students learn with STS/Constructivist approaches. They also increased their use of STS/Constructivist approaches which were developed and applied to teaching science for all students. (3) Preservice science teachers showed statistically significant growth toward an STS/Constructivist philosophy of science teaching and learning in terms of student actions in the classroom, as well as their

  16. Proteomic Technologies for the Study of Osteosarcoma

    Directory of Open Access Journals (Sweden)

    Stephanie D. Byrum

    2012-01-01

    Full Text Available Osteosarcoma is the most common primary bone cancer of children and is established during stages of rapid bone growth. The disease is a consequence of immature osteoblast differentiation, which gives way to a rapidly synthesized incompletely mineralized and disorganized bone matrix. The mechanism of osteosarcoma tumorogenesis is poorly understood, and few proteomic studies have been used to interrogate the disease thus far. Accordingly, these studies have identified proteins that have been known to be associated with other malignancies, rather than being osteosarcoma specific. In this paper, we focus on the growing list of available state-of-the-art proteomic technologies and their specific application to the discovery of novel osteosarcoma diagnostic and therapeutic targets. The current signaling markers/pathways associated with primary and metastatic osteosarcoma that have been identified by early-stage proteomic technologies thus far are also described.

  17. STS Motion Control Using Humanoid Robot

    Directory of Open Access Journals (Sweden)

    Mohd Bazli Bahar

    2014-07-01

    Full Text Available This study presents the development of Sit to Stand (STS motion control method. The main challenge in STS is in addressing the lift-off from chair problem. In solving the problem, the main components of the humanoid STS motion system involved are the (1 phase and trajectory planning and (2 motion control. These components should be designed so that the Zero Moment Point (ZMP, Centre of Pressure (CoP and Centre of Mass (CoM is always in the support polygon. Basically, in STS motion control there are two components, 1. Action selector and 2. Tracking controller. The STS motion control should able to operate in real time and continuously able to adapt any change in between the motion. In this way, the accuracy of the controller to rectify the motion error shall increase. The overall proposed method to perform the STS motion is designed to have two main phases. (1 CoM transferring that implements Alexander STS technique and (2 Stabilization Strategy that used IF-THEN rules and proportional velocity controller. This study focuses on the presentation of the development of second phase which are 1. The development of the IF-THEN rules as the action selector that operates in real time to assists the proportional controller in making the best decision and, 2. The development of Proportional Gain Identification for the proportional velocity controller that is capable to change the gain implementation by referring to the define region that represent the motion condition. The validation of the proposed method is done experimentally using NAO robot as the test platform. The coefficient of the gain identification for the proportional controller was tuned using NAO robot that was initially set at sitting position on a wooden chair. The inclination of the body from a frame perpendicular with the ground, angle y is observed. Coefficient that gives the lowest RMSE of angle y trajectory is taken as a constant. Results show the proposed control method has reduce

  18. STS-3 medical report

    Science.gov (United States)

    Pool, S. L. (Editor); Johnson, P. C., Jr. (Editor); Mason, J. A. (Editor)

    1982-01-01

    The medical operations report for STS-3, which includes a review of the health of the crew before, during, and immediately after the third Shuttle orbital flight is presented. Areas reviewed include: health evaluation, medical debriefing of crewmembers, health stabilization program, medical training, medical 'kit' carried in flight, tests and countermeasures for space motion sickness, cardiovascular profile, biochemistry and endocrinology results, hematology and immunology analyses, medical microbiology, food and nutrition, potable water, shuttle toxicology, radiological health, and cabin acoustic noise. Environmental effects of shuttle launch and landing medical information management, and management, planning, and implementation of the medical program are also dicussed.

  19. STS-65 Mission Insignia

    Science.gov (United States)

    1994-01-01

    Designed by the mission crew members, the STS-65 insignia features the International Microgravity Lab (IML)-2 mission and its Spacelab module which flew aboard the Space Shuttle Columbia. IML-2 is reflected in the emblem by two gold stars shooting toward the heavens behind the IML lettering. The Space Shuttle Columbia is depicted orbiting the logo and reaching off into space, with Spacelab on an international quest for a better understanding of the effects of space flight on materials processing and life sciences.

  20. Exploring Transition of Large Technological Systems through Relational Data - A Study of The Danish Smart Grid Development

    DEFF Research Database (Denmark)

    Jurowetzki, Roman

    2016-01-01

    Combining elements form the Science, Technology and Society (STS) tradition with the Technological Innovation System (TIS) framework and utilising unstructured and relational data as well as novel analysis tools, this thesis explores the development of the Danish smart grid and the associated tra...... development, research funding, and the definition of standards....

  1. STS as science or politics?

    Science.gov (United States)

    Collins, Harry; Evans, Robert; Weinel, Martin

    2017-08-01

    In a recent editorial for this journal, Sergio Sismondo makes two claims. First, he states that STS bears no responsibility for the emergence of post-truth politics. Second, he claims that debates about the nature of expertise that take place within STS are irrelevant in this context. In contrast, we argue that, whether or not STS had a causal influence on the emergence of post-truth politics, there is a clear resonance between the two positions and that the current political climate makes the empirically informed and scientific analysis of expertise and the form of life of science more important than ever. We argue that treating the contribution of STS to these matters as essentially political rather than scientific surrenders any special role we have as experts on the organization and values of science and leaves STS as just one political actor among others.

  2. Elementary Teachers' Experiences with Technology Professional Development and Using Technology in the Classroom: A Case Study

    Science.gov (United States)

    Grizzle, Pamela Lavon

    2016-01-01

    In order for educators to prepare students for technology-enhanced learning educators must first be prepared. The digital divide and technology professional development are two factors impacting the depth at which technology is integrated into the classroom. The local problem addressed in this study was that the impact of technology professional…

  3. Computer technology forecast study for general aviation

    Science.gov (United States)

    Seacord, C. L.; Vaughn, D.

    1976-01-01

    A multi-year, multi-faceted program is underway to investigate and develop potential improvements in airframes, engines, and avionics for general aviation aircraft. The objective of this study was to assemble information that will allow the government to assess the trends in computer and computer/operator interface technology that may have application to general aviation in the 1980's and beyond. The current state of the art of computer hardware is assessed, technical developments in computer hardware are predicted, and nonaviation large volume users of computer hardware are identified.

  4. STS-121 Launch

    Science.gov (United States)

    2006-01-01

    Space Shuttle Discovery and its seven-member crew launched at 2:38 p.m. (EDT) to begin the two-day journey to the International Space Station (ISS) on the historic Return to Flight STS-121 mission. The shuttle made history as it was the first human-occupying spacecraft to launch on Independence Day. During its 12-day mission, this utilization and logistics flight delivered a multipurpose logistics module (MPLM) to the ISS with several thousand pounds of new supplies and experiments. In addition, some new orbital replacement units (ORUs) were delivered and stowed externally on the ISS on a special pallet. These ORUs are spares for critical machinery located on the outside of the ISS. During this mission the crew also carried out testing of Shuttle inspection and repair hardware, as well as evaluated operational techniques and concepts for conducting on-orbit inspection and repair.

  5. Trends, Issues, and Gaps in Technology for Elementary Social Studies.

    Science.gov (United States)

    Nickell, Pat; Field, Sherry L.; Roach, Pamela S.

    2001-01-01

    Addresses the status of technology in elementary social studies. Reviews research on technology and elementary social studies, explores various examples of practice, discusses how preservice social studies methods textbooks treat the issue of using technology, and identifies beliefs held by elementary social studies teachers. (CMK)

  6. New technologies for offshore wildlife risk studies

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, Caleb

    2011-07-01

    Full text: Two research initiatives by Pandion Systems, funded by the US Bureau of Ocean Energy Management, Regulation, and Enforcement (BOEMRE), are addressing the enormous challenges of conducting offshore wind-wildlife risk/impact studies by providing new wildlife sensing technologies that surmount some of the limitations of previous techniques. Both initiatives rest on the shoulders of pioneering European studies and experience. One entails the development of a remote-operating acoustic/thermographic detector. This device, designed with input from the Danish National Environmental Research Institute (NERI) and Cornell Laboratory of Ornithology (CLO), will provide species-specific occurrence data, as well as flight altitude estimation, for vocalizing flying wildlife that flies within a detection beam that corresponds roughly to the rotor swept zone of a single, commercial marine wind turbine. While the detection beam is small and limitations exist for silently flying animals, this device will be capable of providing information on bats and on federally-listed bird species that has been difficult or impossible to achieve with other methods. A preliminary version of this device was developed in 2009-2010 in a BOEMRE-funded pilot study, and a sea-worthy device is currently being developed, scheduled for initial deployment on the US Atlantic Outer Continental Shelf (AOCS) in summer, 2011. A second initiative is targeted at developing a high-definition aerial survey protocol capable of providing a safe, cost-effective, reproducible snapshot of bird, marine mammal, and sea turtle distribution on the entire AOCS. This research, being conducted with a team of technologists and biologists including scientists from the British Trust for Ornithology (BTO), entails conducting a series of pilot experiments in spring, 2011 with a variety of different aircraft, cameras, flight altitudes, and image resolutions, to determine optimum protocols for the large-scale surveys. Both of

  7. A study on nuclear technology policy

    Energy Technology Data Exchange (ETDEWEB)

    Yang, M. H.; Kim, H. J.; Chung, W. S.; Yun, S. W.; Kim, H. S

    2001-01-01

    This study was carried out as a part of institutional activities of KAERI. Major research area are as follows; Future directions and effects for national nuclear R and D to be resulted from restructuring of electricity industry are studied. Comparative study was carried out between nuclear energy and other energy sources from the point of views of environmental effects by introducing life cycle assessment(LCA) method. Japanese trends of reestablishment of nuclear policy such as restructuring of nuclear administration system and long-term plan of development and use of nuclear energy are also investigated, and Russian nuclear development program and Germany trends for phase-out of nuclear electricity generation are also investigated. And trends of the demand and supply of energy in eastern asian countries in from the point of view of energy security and tension in the south china sea are analyzed and investigation of policy trends of Vietnam and Egypt for the development and use of nuclear energy for the promotion of nuclear cooperation with these countries are also carried out. Due to the lack of energy resources and high dependence of imported energy, higher priority should be placed on the use of localized energy supply technology such as nuclear power. In this connection, technological development should be strengthened positively in order to improve economy and safety of nuclear energy and proliferation resistance of nuclear fuel cycle and wide ranged use of radiation and radioisotopes and should be reflected in re-establishment of national comprehensive promotion plan of nuclear energy in progress.

  8. The Danish Association for Science and Technology Studies

    DEFF Research Database (Denmark)

    A presentation of the Danish Association for Science and Technology Studies (DASTS). Organization, experiences, challenges and future developments.......A presentation of the Danish Association for Science and Technology Studies (DASTS). Organization, experiences, challenges and future developments....

  9. Engaged, embedded, enjoined: science and technology studies in the National Science Foundation.

    Science.gov (United States)

    Hackett, Edward J; Rhoten, Diana R

    2011-12-01

    Engaged scholarship is an intellectual movement sweeping across higher education, not only in the social and behavioral sciences but also in fields of natural science and engineering. It is predicated on the idea that major advances in knowledge will transpire when scholars, while pursuing their research interests, also consider addressing the core problems confronting society. For a workable engaged agenda in science and technology studies, one that informs scholarship as well as shapes practice and policy, the traditional terms of engagement must be renegotiated to be more open and mutual than has historically characterized the nature of inquiry in this field. At the same time, it is essential to protect individual privacy and preserve government confidentiality. Yet there is a scientific possibility for and benefit to introducing more collaborative and deliberative research approaches between scholar and subject in ways that will not violate these first-order ethics. To make the case, this article discusses the possibilities and perils of engaged science and technology scholarship by drawing on our own recent experiences to conduct and apply STS research while embedded in the National Science Foundation. Brief accounts of these experiences reveal the opportunities as well as the challenges of engaged scholarship. They also provide lessons for those fellow travelers who might follow the authors to this or other like host organizations with ambitions of increasing fundamental knowledge about and applying research to the policies, programs, and decisions of the scientific enterprise.

  10. Microfluidic technologies for studying synthetic circuits.

    Science.gov (United States)

    Lin, Benjamin; Levchenko, Andre

    2012-08-01

    Advances in synthetic biology have augmented the available toolkit of biomolecular modules, allowing engineering and manipulation of signaling in a variety of organisms, ranging in complexity from single bacteria and eukaryotic cells to multi-cellular systems. The richness of synthetic circuit outputs can be dramatically enhanced by sophisticated environmental control systems designed to precisely pattern spatial-temporally heterogeneous environmental stimuli controlling these circuits. Moreover, the performance of the synthetic modules and 'blocks' needed to assemble more complicated networks requires more complete characterization as a function of arbitrarily complex environmental inputs. Microfluidic technologies are poised to meet these needs through a variety of innovative designs capitalizing on the unique benefits of manipulating fluids on the micro-scales and nano-scales. This review discusses the utility of microfluidics for the study of synthetic circuits and highlights recent work in the area.

  11. STS-31: APU Controller Removal

    Science.gov (United States)

    1990-01-01

    The launch April 10 of the STS-31 was scrubbed at T-4 minutes due to a faulty valve in auxiliary power unit (APU) number one. The auxiliary power unit is a hydrazine-fueled, turbine-driven power unit that generates mechanical shaft power to drive a hydraulic pump that produces pressure for the orbiter's hydraulic system. This video shows the removal of the STS-31's auxiliary power unit (APU).

  12. STS Historical Perspectives.

    Science.gov (United States)

    Lewis, A. O.

    1990-01-01

    Presented is a collection of poems from the seventeenth through nineteenth centuries that have asked questions about the social consequences of science and technology. Discussed are the beliefs of poets toward scientific knowledge and advances in technology. (KR)

  13. Study on brackish water treatment technology

    Institute of Scientific and Technical Information of China (English)

    HE Xu-wen(何绪文); Xu De-ping (许德平); WU Bing(吴兵); WANG Tong(王通)

    2003-01-01

    Based on the characters of deep well-water quality in Fenxi Mining Group in Liulin, the feasibilities of two treatment technologies which use electrodialysis and reverse osmosis are analyzed. Through analyzing and comparing, reverse osmosis technology has several advantages, such as good treatment effect, convenient operating management and low run-cost.

  14. Studying Innovation Technologies in Modern Education

    Science.gov (United States)

    Stukalenko, Nina M.; Zhakhina, Bariya B.; Kukubaeva, Asiya K.; Smagulova, Nurgul K.; Kazhibaeva, Gulden K.

    2016-01-01

    In modern society, innovation technologies expand to almost every field of human activity, including such wide field as education. Due to integrating innovation technologies into the educational process practice, this phenomenon gained special significance within improvement and modernization of the established educational system. Currently, the…

  15. Cooperation, Technology, and Performance: A Case Study.

    Science.gov (United States)

    Cavanagh, Thomas; Dickenson, Sabrina; Brandt, Suzanne

    1999-01-01

    Describes the CTP (Cooperation, Technology, and Performance) model and explains how it is used by the Department of Veterans Affairs-Veteran's Benefit Administration (VBA) for training. Discusses task analysis; computer-based training; cooperative-based learning environments; technology-based learning; performance-assessment methods; courseware…

  16. The Study on Information Extraction Technology of Seismic Damage

    Directory of Open Access Journals (Sweden)

    Huang Zuo-wei

    2013-01-01

    Full Text Available In order to improve the information extraction technology of seismic damage assessment and information publishing of earthquake damage. Based on past earthquake experience it was constructed technical flow of earthquake damage assessment rapidly, this study, take Yushu earthquake as example, studies the framework and establishment of the information service system by means of Arc IMS and distributed database technology. It analysis some key technologies, build web publishing architecture of massive remote sensing images. The system implements joint application of remote sensing image processing technology, database technology and Web GIS technology, the result could provide the important basis for earthquake damage assessment, emergency management and rescue mission.

  17. Small transport aircraft technology propeller study

    Science.gov (United States)

    Black, B. M.; Magliozzi, B.; Rohrbach, C.

    1983-01-01

    A study to define potential benefits of advanced technology propeller for 1985-1990 STAT commuter airplanes was completed. Two baselines, a Convair, 30 passenger, 0.47 Mach number airplane and a Lockheed, 50 passenger, 0.70 Mach number airplane, were selected from NASA-Ames sponsored airframe contracts. Parametric performance, noise level, weight and cost trends for propellers with varying number of blades, activity factor, camber and diameter incorporating blade sweep, tip proplets, advanced composite materials, advanced airfoils, advanced prevision synchrophasing and counter-rotation are presented. The resulting DOC, fuel burned, empty weight and acquisition cost benefits are presented for resizings of the two baseline airplanes. Six-bladed propeller having advanced composite blades, advanced airfoils, tip proplets and advanced prevision synchrophasers provided the maximum DOC improvements for both airplanes. DOC and fuel burned were reduced by 8.3% and 17.0% respectively for the Convair airplane and by 24.9% and 41.2% respectively for the Lockheed airplane. The larger reductions arose from a baseline definition with very heavy fuselage acoustic treatment. An alternate baseline, with a cabin noise 13dB in excess of the objective, was also studied.

  18. Networking and Information Technology Workforce Study: Final Report

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — This report presents the results of a study of the global Networking and Information Technology NIT workforce undertaken for the Networking and Information...

  19. STS-99 Crew Insignia

    Science.gov (United States)

    1999-01-01

    The STS-99 crew members designed the flight insignia for the Shuttle Radar Topography Mission (SRTM), the most ambitious Earth mapping mission to date. Two radar anternas, one located in the Shuttle bay and the other located on the end of a 60-meter deployable mast, was used during the mission to map Earth's features. The goal was to provide a 3-dimensional topographic map of the world's surface up to the Arctic and Antarctic Circles. In the patch, the clear portion of Earth illustrates the radar beams penetrating its cloudy atmosphere and the unique understanding of the home planet that is provided by space travel. The grid on Earth reflects the mapping character of the SRTM mission. The patch depicts the Space Shuttle Endeavour orbiting Earth in a star spangled universe. The rainbow along Earth's horizon resembles an orbital sunrise. The crew deems the bright colors of the rainbow as symbolic of the bright future ahead because of human beings' venturing into space. The crew of six launched aboard the Space Shuttle Endeavor on February 11, 2000 and completed 222 hours of around the clock radar mapping gathering enough information to fill more than 20,000 CDs.

  20. Desert Research and Technology Studies 2005 Report

    Science.gov (United States)

    Ross, Amy J.; Kosmo, Joseph J.; Janoiko, Barbara A.; Bernard, Craig; Splawn, Keith; Eppler, Dean B.

    2006-01-01

    During the first two weeks of September 2005, the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) Advanced Extravehicular Activity (AEVA) team led the field test portion of the 2005 Research and Technology Studies (RATS). The Desert RATS field test activity is the culmination of the various individual science and advanced engineering discipline areas year-long technology and operations development efforts into a coordinated field test demonstration under representative (analog) planetary surface terrain conditions. The purpose of the RATS is to drive out preliminary exploration concept of operations EVA system requirements by providing hands-on experience with simulated planetary surface exploration extravehicular activity (EVA) hardware and procedures. The RATS activities also are of significant importance in helping to develop the necessary levels of technical skills and experience for the next generation of engineers, scientists, technicians, and astronauts who will be responsible for realizing the goals of the Constellation Program. The 2005 Desert RATS was the eighth RATS field test and was the most systems-oriented, integrated field test to date with participants from NASA field centers, the United States Geologic Survey (USGS), industry partners, and research institutes. Each week of the test, the 2005 RATS addressed specific sets of objectives. The first week focused on the performance of surface science astro-biological sampling operations, including planetary protection considerations and procedures. The second week supported evaluation of the Science, Crew, Operations, and Utility Testbed (SCOUT) proto-type rover and its sub-systems. Throughout the duration of the field test, the Communications, Avionics, and Infomatics pack (CAI-pack) was tested. This year the CAI-pack served to provide information on surface navigation, science sample collection procedures, and EVA timeline awareness. Additionally, 2005 was the first

  1. Study on evaluation system of high & new technology superior enterprises

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    With the globalization of economy and science & technology, high & new technology enterprises have become the point of Chinese economic growth and the important basis for constructing innovative country. By analyzing the characteristics of high & new technology superior enterprises and the influential factors, the evaluation index and method based on Grey Relation Analysis are designed. Some high & new technology enterprises in Heilongjiang province are evaluated and application tactics of evaluation system are proposed. This study provides scientific method and basis for government to obtain development state about high & new technology enterprises and design planning and policies of high & new technology industry.

  2. STS-62 Space Shuttle mission report

    Science.gov (United States)

    Fricke, Robert W., Jr.

    1994-05-01

    The STS-62 Space Shuttle Program Mission Report summarizes the Payload activities as well as the Orbiter, External Tank (ET), Solid Rocket Booster (SRB), Redesigned Solid Rocket Motor (RSRM), and the Space Shuttle main engine (SSHE) systems performance during the sixty-first flight of the Space Shuttle Program and sixteenth flight of the Orbiter vehicle Columbia (OV-102). In addition to the Orbiter, the flight vehicle consisted of an ET designated as ET-62; three SSME's which were designated as serial numbers 2031, 2109, and 2029 in positions 1, 2, and 3, respectively; and two SRB's which were designated BI-064. The RSRM's that were installed in each SRB were designated as 360L036A (lightweight) for the left SRB, and 36OWO36B (welterweight) for the right SRB. This STS-62 Space Shuttle Program Mission Report fulfills the Space Shuttle Program requirement as documented in NSTS 07700, Volume 8, Appendix E. That document requires that each major organizational element supporting the Program report the results of its hardware evaluation and mission performance plus identify all related in-flight anomalies. The primary objectives of the STS-62 mission were to perform the operations of the United States Microgravity Payload-2 (USMP-2) and the Office of Aeronautics and Space Technology-2 (OAST-2) payload. The secondary objectives of this flight were to perform the operations of the Dexterous End Effector (DEE), the Shuttle Solar Backscatter Ultraviolet/A (SSBUV/A), the Limited Duration Space Environment Candidate Material Exposure (LDCE), the Advanced Protein Crystal Growth (APCG), the Physiological Systems Experiments (PSE), the Commercial Protein Crystal Growth (CPCG), the Commercial Generic Bioprocessing Apparatus (CGBA), the Middeck Zero-Gravity Dynamics Experiment (MODE), the Bioreactor Demonstration System (BDS), the Air Force Maui Optical Site Calibration Test (AMOS), and the Auroral Photography Experiment (APE-B).

  3. Egyptian Children's Use of Technology: A Phenomenological Study

    Science.gov (United States)

    Morgan, Hani; Lee, Guang-Lea

    2017-01-01

    Although the use of technology can be very important for children younger than age 12 years, not all countries possess the financial resources to make digital resources widely available to students. Children can also use technology inappropriately. This study explores the consequences of exposure to different forms of technology on children. It…

  4. Voice identity recognition: functional division of the right STS and its behavioral relevance.

    Science.gov (United States)

    Schall, Sonja; Kiebel, Stefan J; Maess, Burkhard; von Kriegstein, Katharina

    2015-02-01

    The human voice is the primary carrier of speech but also a fingerprint for person identity. Previous neuroimaging studies have revealed that speech and identity recognition is accomplished by partially different neural pathways, despite the perceptual unity of the vocal sound. Importantly, the right STS has been implicated in voice processing, with different contributions of its posterior and anterior parts. However, the time point at which vocal and speech processing diverge is currently unknown. Also, the exact role of the right STS during voice processing is so far unclear because its behavioral relevance has not yet been established. Here, we used the high temporal resolution of magnetoencephalography and a speech task control to pinpoint transient behavioral correlates: we found, at 200 msec after stimulus onset, that activity in right anterior STS predicted behavioral voice recognition performance. At the same time point, the posterior right STS showed increased activity during voice identity recognition in contrast to speech recognition whereas the left mid STS showed the reverse pattern. In contrast to the highly speech-sensitive left STS, the current results highlight the right STS as a key area for voice identity recognition and show that its anatomical-functional division emerges around 200 msec after stimulus onset. We suggest that this time point marks the speech-independent processing of vocal sounds in the posterior STS and their successful mapping to vocal identities in the anterior STS.

  5. STS-78 Mission Insignia

    Science.gov (United States)

    1996-01-01

    The STS-78 patch links past with present to tell the story of its mission and science through a design imbued with the strength and vitality of the 2-dimensional art of North America's northwest coast Indians. Central to the design is the space Shuttle whose bold lines and curves evoke the Indian image for the eagle, a native American symbol of power and prestige as well as the national symbol of the United States. The wings of the Shuttle suggest the wings of the eagle whose feathers, indicative of peace and friendship in Indian tradition, are captured by the U forms, a characteristic feature of Northwest coast Indian art. The nose of the Shuttle is the strong downward curve of the eagle's beak, and the Shuttle's forward windows, the eagle's eyes, represented through the tapered S forms again typical of this Indian art form. The basic black and red atoms orbiting the mission number recall the original NASA emblem while beneath, utilizing Indian ovoid forms, the major mission scientific experiment package LMS (Life and Materials Sciences) housed in the Shuttle's cargo bay is depicted in a manner reminiscent of totem-pole art. This image of a bird poised for flight, so common to Indian art, is counterpointed by an equally familiar Tsimshian Indian symbol, a pulsating sun with long hyperbolic rays, the symbol of life. Within each of these rays are now encased crystals, the products of this mission's 3 major, high-temperature materials processing furnaces. And as the sky in Indian lore is a lovely open country, home of the Sun Chief and accessible to travelers through a hole in the western horizon, so too, space is a vast and beckoning landscape for explorers launched beyond the horizon. Beneath the Tsimshian sun, the colors of the earth limb are appropriately enclosed by a red border representing life to the Northwest coast Indians. The Indian colors of red, navy blue, white, and black pervade the STS-78 path. To the right of the Shuttle-eagle, the constellation

  6. A Study of Mathematics Needed for Dental Laboratory Technology, Medical Laboratory Technology, and Respiratory Therapy.

    Science.gov (United States)

    Roberts, Keith J.

    A study was conducted to determine what mathematics skills were needed for Dental Laboratory Technology, Medical Laboratory Technology, and Respiratory Therapy. Data obtained from studies, course outlines, textbooks, and reports were used to construct a 79-item mathematics skill questionnaire. This questionnaire was administered to employers,…

  7. Being human in a technological age : A study of the impacts of smart technology usage

    OpenAIRE

    Brulin, Sara

    2013-01-01

    Today humans are using a large amount of smart technology to support their daily activities, for instance smartphones, tablets and computers. The relationship towards technology is changing, and with the change comes questions. In this thesis a qualitative interview study was used to deepen the understanding of humans’ daily use of technology and its impacts on their daily life. The study has shown that humans’ technology usage has both positive and negative impacts on their daily life. For i...

  8. Study on the propagation characteristic of the Thermal Fatigue Crack by cyclic thermal load in the STS 304 tube

    Energy Technology Data Exchange (ETDEWEB)

    An, Dae-Hwan; Hwang, Woong-Ki; Kim, Jae-Seong; Lee, Sang-Yul; Lee, Bo-Young [Korea Aerospace University, Goyang (Korea, Republic of)

    2008-05-15

    Thermal fatigue crack is one of the life-limiting mechanisms in nuclear power plant conditions. During the operation of a power plant thermal fatigue cracks can initiate and grow in various components (straight pipe sections, valve bodies, pipe elbows, and collector head screw holes). Causes for this are mixing, striping or stratification of hot and cold water. A typical component, where thermal fatigue cracking occurs, is a T-joint where hot and cold fluids meet and mix. The turbulent mixing of fluids with different temperatures induces rapid temperature changes to the pipe wall. The resulting uneven temperature distribution prevents thermal expansion and gives rise to thermal stresses. The successive thermal transients cause varying, cyclic thermal stresses. These cyclic thermal stresses cause fatigue crack initiation and growth similar to cyclic mechanical stresses. In order to fabricate thermal fatigue crack similar to realistic crack, successive thermal transients were applied to the specimen. In this study, in order to identify propagation characteristic of thermal fatigue crack, thermal fatigue crack specimens of 4000cycle, 6000cycle, 9000cycle were fabricated. Thermal transient cycles were combined with heating (60sec) and cooling cycle (30sec). Destructive testing and scanning electron microscopy were carried out to identify the crack propagation characteristic and fracture surface morphology.

  9. Reactive membrane technology: Two case studies

    DEFF Research Database (Denmark)

    Zeuner, Birgitte; Luo, Jianquan; Pinelo, Manuel

    2014-01-01

    Enzymatic processes are generally sustainable processes that use mild conditions and natural substrates. Membrane technology can be employed for enzyme immobilization as well as for recycling free enzymes. Using alcohol dehydrogenase (ADH) as part of a process to recycle CO2 to methanol, we...

  10. Transport Network TechnologiesStudy and Testing

    DEFF Research Database (Denmark)

    Bozorgebrahimi, K.; Channegowda, M.; Colmenero, A.

    Following on from the theoretical research into Carrier Class Transport Network Technologies (CCTNTs) documented in DJ1.1.1, this report describes the extensive testing performed by JRA1 Task 1. The tests covered EoMPLS, Ethernet OAM, Synchronous Ethernet, PBB-TE, MPLS-TP, OTN and GMPLS...

  11. STS and Researcher Intervention Strategies

    Directory of Open Access Journals (Sweden)

    Brian Martin

    2016-06-01

    Full Text Available When I learned about a concerted campaign against Australian vaccination critics, I decided to intervene in the debate. As a result, some proponents of vaccination turned on me, making abusive comments and complaining to university officials. At several points in this experience, I had to make choices about how to intervene or respond. STS perspectives offered valuable insights for understanding the dynamics of the controversy but provided little guidance for making decisions. Some reasons are offered for why STS lacks tools for guiding practical action in such situations.

  12. STS Interventions: Preparing, Defending, Learning

    Directory of Open Access Journals (Sweden)

    Brian Martin

    2016-06-01

    Full Text Available Intervening in the Australian vaccination debate, I found that STS perspectives helped me understand the controversy but gave little guidance on how to defend against attacks. Max Liboiron comments that preparation, including support networks, should precede interventions. I was well supported in my involvement in the vaccination debate, but those who openly advocate a stigmatized view may have difficulty gaining support. Teun Zuiderent-Jerak asks what is being learned when interventions reinforce existing categories. Controversy participants can learn by being exposed to STS perspectives; controversy researchers, when attacked, can gain new information and develop new research ideas.

  13. Using CAVE technology for functional genomics studies.

    Science.gov (United States)

    Sensen, Christoph W

    2002-01-01

    We have established the first Java 3D-enabled CAVE (CAVE automated virtual environment). The Java application programming interface allows the complete separation of the program development from the program execution, opening new application domains for the CAVE technology. Programs can be developed on any Java-enabled computer platform, including Windows, Macintosh, and Linux workstations, and executed in the CAVE without modification. The introduction of Java, one of the major programming environments for bioinformatics, into the CAVE environment allows the rapid development applications for genome research, especially for the analysis of the spatial and temporal data that are being produced by functional genomics experiments. The CAVE technology will play a major role in the modeling of biological systems that is necessary to understand how these systems are organized and how they function.

  14. High-G Gimbal Technology Studies

    Science.gov (United States)

    1979-07-01

    will verify the proposed High-G platform concept technology. 20 a -_ REFERENCES I. Invention Disclosure "High-G Gimbal Platform,* AMPC 37b6, 30 August...1977, Aubrey Rodgers. 2. Invention Disclosure "Snap-Lock Mechanism for High-G Gimbal Platform," AMPC 3831, 24 February 1978, Aubrey Rodgers. 3...Invention Disclosure "Rea.•tion Jet Torquer," AMPC 3832, 24 February 1978, Aubrey Rodgers and Eacar L. Bailey. 21 DISTRIBUTION No. of Copies Defense

  15. The Study on Wheat Concurrent-flow Drying Technology

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The relation between technology parameters and performance index of the wheat three-stage concurrent -flow drying technology is studied by use of quadratic orthogonial rotate combinative experiment design method. The optimum parameters of drying technology are obtained by nonlinear optimize corresponding regression model and test. All experiment was finished in concurrent-flow grain drying experiment table. The results of this study will be significant for designing energy-saving grain drying machine.

  16. Effectiveness of Subsidies in Technology Adoption: A Case Study Involving Reverse Osmosis (RO Membrane Technology

    Directory of Open Access Journals (Sweden)

    Nur Laili

    2016-12-01

    Full Text Available Adoption of new technologies is a process that involves technological learning and penetration of new products into the market. Within the process of new technologies adoption, government usually intervened by providing incentives, in order to support the technology adoption to be succeed. This paper examines the effectiveness of incentives for the sustainability of reverse osmosis (RO membrane technology adoption. The study conducted through single case study on SWRO installation in Mandangin Island, East Java, Indonesia. Results of case study indentify the existence of government incentive in the form of direct subsidies to decrease the price of clean water. Although successful in reducing the price of water, but effectiveness of the subsidy on the sustainability of SWRO is still low, which is operates only 30% in a year. Further analysis shows that these subsidies actually be counter-productive to the sustainability of SWRO installation.

  17. The Relationship between Technology Use of Administrators and Technology Use of Teachers: A Quantitative Study

    Science.gov (United States)

    Szafranski, Sandra L.

    2009-01-01

    The purpose of this quantitative correlational study was to assess the relationship between the level of technology use of administrators and the level of technology use of their teachers. The target sample was principals and teachers in nine schools in three school districts in south central Wisconsin. Participants were from one elementary…

  18. Evaluation of Installation Methods for STS-2 Seismometers

    Science.gov (United States)

    Widmer-Schnidrig, R.; Kurrle, D.; Wielandt, E.

    2007-12-01

    -net. Only few of the STS-2s operated by the GEOFON network, the F-net and the SDSnet stations can detect the hum (28, 26 and 19%, respectively), whereas 78% of the GRSN and GRF stations equipped with the Stuttgart shielding give positive results. We primarily attribute this difference to the different kinds of sensor shieldings in these networks. In our comparison of horizontal component spectra of the 2004 Sumatra event we find that the F-net ranks in quality second behind the GRSN but before SDS-net and GEOFON. The elevated noise level in the GEOFON spectra is probably due to the fact that the GEOFON shield is not stiff enough so that variations in ambient air pressure induce large tilt noise. In spite of the lack of side-by-side comparisons of differently shielded seismometers we have found clear indications that the shielding proposed by Wielandt yields by far the least noisy low frequency vertical and horizontal component data. While our study concentrated on the free mode band our findings are certainly also relevant at the frequencies of surface waves and long-period body waves as noise levels in these frequency bands are highly correlated. Based on our study we recommend the use of the Stuttgart shielding for STS-2 based networks. stuttgart.de/~widmer/wws.pdf

  19. STS-54 Physics of Toys

    Science.gov (United States)

    1993-01-01

    Greg Vogt, NASA Headquarters Education Specialist, and Carolyn Sumners, Houston Museum of Natural Science, give an overview of the spaceborne experiments that will take place on the STS-54 Endeavour mission. Mr. Vogt discusses the objectives and procedures of the experiments, which are structured around using toys to show the effects of microgravity. Mr. Vogt and Ms. Sumners then answer questions from the press.

  20. Game Design as STS Research

    Directory of Open Access Journals (Sweden)

    Joseph Dumit

    2017-09-01

    Full Text Available Game design offers a powerful pedagogical paradigm for engaging students in thinking and researching sociotechnical systems. Using the example of designing a game around fracking, this paper describes how game design grapples with emergent dynamic processes, and how students are drawn into becoming STS researchers.

  1. A case study of technology transfer: Cardiology

    Science.gov (United States)

    Schafer, G.

    1974-01-01

    Research advancements in cardiology instrumentation and techniques are summarized. Emphasis is placed upon the following techniques: (1) development of electrodes which show good skin compatibility and wearer comfort; (2) contourography - a real time display system for showing the results of EKGs; (3) detection of arteriosclerosis by digital computer processing of X-ray photos; (4) automated, noninvasive systems for blood pressure measurement; (5) ultrasonoscope - a noninvasive device for use in diagnosis of aortic, mitral, and tricuspid valve disease; and (6) rechargable cardiac pacemakers. The formation of a biomedical applications team which is an interdisciplinary team to bridge the gap between the developers and users of technology is described.

  2. STS-107 Flight Day 9 Highlights

    Science.gov (United States)

    2003-01-01

    This video shows the activities of the STS-107 crew (Rick Husband, Commander; William McCool, Pilot; Kalpana Chawla, David Brown, Michael Anderson, Laurel Clark, Mission Specialists; Ilan Ramon, Payload Specialist) during flight day 9 of the Columbia orbiter's final flight. The primary activities of flight day 9 are spaceborne experiments. The video shows a commercial experiment on roses, a partial view of Africa from Libya to the Horn of Africa through the MEIDEX (Mediterranean Israeli Dust Experiment), and the FAST (Facility for Absorption and Surface Tension) experiment. The STARS (Space Technology and Research Students) international student experiments are shown. The preliminary results of these experiments on the effects of microgravity on silkworms, spiders, crystal growth, fish embryos, carpenter bees, and ants are discussed. The video includes a view of southern Spain and the Mediterranean Sea.

  3. Technology-Enhanced Mathematics Education for Creative Engineering Studies

    DEFF Research Database (Denmark)

    Triantafyllou, Eva; Timcenko, Olga

    2014-01-01

    This project explores the opportunities and challenges of integrating digital technologies in mathematics education in creative engineering studies. Students in such studies lack motivation and do not perceive the mathematics the same way as mathematics students do. Digital technologies offer new...

  4. sY116, a human -linked polymorphic STS

    Indian Academy of Sciences (India)

    G. Mustafa Saifi; Reiner Veitia; Houssein Khodjet El Khil; Sandrine Barbaux; Preetha Tilak; I. Manorama Thomas; Marc Fellous

    2000-04-01

    During a study of deletions of Y-chromosomal DNA in infertile males, sY116, a Y-linked STS, showed different electrophoretic mobilities in three males, two infertile and one fertile. A study of this STS among 35 other normal males showed that this locus is polymorphic. sY116 has a poly A-rich stretch whose instability appears to be the most likely cause of this polymorphism. The possible usefulness of sY116 polymorphism in the detection of subtle genome-wide instabilities in some types of cancer is discussed.

  5. Prehispanic goldwork technology study by PIXE analysis

    Science.gov (United States)

    Zucchiatti, Alessandro; Climent Font, Aurelio; Gutierrez Neira, Patricia Carolina; Perea, Alicia; Fernandez Esquivel, Patricia; Rovira Llorens, Salvador; Ruvalcaba Sil, José Luis; Verde, Ana

    2014-08-01

    Technological characterization of pre-Hispanic gold metallurgy has still a wide deficit of analytical data. A set of 103 pieces from the so called "Quimbaya's treasure" (QT) and the "Costa Rica collection" (CRC) of the Museo de America of Madrid were submitted to IBA analysis (PIXE and RBS) at the CMAM in three phases and the metal composition was determined. Only in a limited number of cases, due to the dramatic erosion of the gilded layer, produced by abrasive cleaning methods applied after the discovery and before the seventies, it was possible to determine also the sequence of layers, which gives information on the manufacture technology and the type and purity of the metals. PIXE results are reported and discussed. Data show that the CRC objects have very high gold levels (>80% in weight) while the QT have a more variable composition with significant Cu levels associated to the so called Tumbaga-alloy. In the cases where polishing had a tolerable effect, PIXE (and RBS), point to depletion gilding as a standard finishing process in the Costa Rica production, resulting in a gold rich surface alloy, while the variable composition of the QT objects may well be linked to deliberate colour choice.

  6. Prehispanic goldwork technology study by PIXE analysis

    Energy Technology Data Exchange (ETDEWEB)

    Zucchiatti, Alessandro, E-mail: alessandro.zucchiatti@uam.es [Centro de Micro Análisis de Materiales, Universidad Autónoma de Madrid, Calle de Faraday 3, Madrid 28049 (Spain); Climent Font, Aurelio [Centro de Micro Análisis de Materiales, Universidad Autónoma de Madrid, Calle de Faraday 3, Madrid 28049 (Spain); Gutierrez Neira, Patricia Carolina; Perea, Alicia [Centro de Ciencias Humanas y Sociales, CSIC, Calle Albasanz 26-28, Madrid 28037 (Spain); Fernandez Esquivel, Patricia [Fundación Museos, Banco Central de Costa Rica, San José (Costa Rica); Rovira Llorens, Salvador [Museo Arqueológico Nacional, Calle Serrano 13, Madrid 28006 (Spain); Ruvalcaba Sil, José Luis [Instituto de Física, Universidad Nacional Autónoma de Mexico, Mexici DF 28006 (Mexico); Verde, Ana [Museo de América, Avda. de los Reyes Católicos 6, Madrid 28040 (Spain)

    2014-08-01

    Technological characterization of pre-Hispanic gold metallurgy has still a wide deficit of analytical data. A set of 103 pieces from the so called “Quimbaya’s treasure” (QT) and the “Costa Rica collection” (CRC) of the Museo de America of Madrid were submitted to IBA analysis (PIXE and RBS) at the CMAM in three phases and the metal composition was determined. Only in a limited number of cases, due to the dramatic erosion of the gilded layer, produced by abrasive cleaning methods applied after the discovery and before the seventies, it was possible to determine also the sequence of layers, which gives information on the manufacture technology and the type and purity of the metals. PIXE results are reported and discussed. Data show that the CRC objects have very high gold levels (>80% in weight) while the QT have a more variable composition with significant Cu levels associated to the so called Tumbaga-alloy. In the cases where polishing had a tolerable effect, PIXE (and RBS), point to depletion gilding as a standard finishing process in the Costa Rica production, resulting in a gold rich surface alloy, while the variable composition of the QT objects may well be linked to deliberate colour choice.

  7. A Study on the Attitudes and Opinions of Engineering Students from the University of Baja California, Mexico, on Science, Technology, and Society

    Science.gov (United States)

    Oliveros Ruiz, Maria Amparo; Sevilla Garcia, Juan Jose; Schorr, Michael

    2010-01-01

    A proposal is presented for the incorporation of the concepts of STS into the teaching of science and technology at the Faculty of Engineering, Mexicali Campus, of the University of Baja California. The method outlined for the development of research and the application of the "Opinions Questionnaire on Science, Technology and Society" is…

  8. A Study on the Attitudes and Opinions of Engineering Students from the University of Baja California, Mexico, on Science, Technology, and Society

    Science.gov (United States)

    Oliveros Ruiz, Maria Amparo; Sevilla Garcia, Juan Jose; Schorr, Michael

    2010-01-01

    A proposal is presented for the incorporation of the concepts of STS into the teaching of science and technology at the Faculty of Engineering, Mexicali Campus, of the University of Baja California. The method outlined for the development of research and the application of the "Opinions Questionnaire on Science, Technology and Society"…

  9. STS-93 Pilot Ashby suits up for launch

    Science.gov (United States)

    1999-01-01

    In the Operations and Checkout Building during final launch preparations for the third time, STS-93 Pilot Jeffrey S. Ashby pulls on his glove, part of his launch and entry suit. After Space Shuttle Columbia's July 20 and 22 launch attempts were scrubbed, the launch was again rescheduled for Friday, July 23, at 12:24 a.m. EDT. STS-93 is a five-day mission primarily to release the Chandra X-ray Observatory, which will allow scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. The STS-93 crew numbers five: Commander Eileen Collins, Ashby, and Mission Specialists Stephen A. Hawley (Ph.D.), Catherine G. Coleman (Ph.D.) and Michel Tognini of France, with the Centre National d'Etudes Spatiales (CNES). Collins is the first woman to serve as commander of a shuttle mission.

  10. STS-93 Pilot Ashby arrives at SLF for launch

    Science.gov (United States)

    1999-01-01

    STS-93 Pilot Jeffrey S. Ashby lands at Kennedy Space Center's Shuttle Landing Facility (SLF) aboard a T-38 jet aircraft. He and other crew members Commander Eileen Collins and Mission Specialists Steven A. Hawley (Ph.D.), Catherine G. 'Cady' Coleman (Ph.D.) and Michel Tognini of France, with the Centre National d'Etudes Spatiales (CNES), are arriving for pre-launch activities. STS-93 is Ashby's inaugural Shuttle flight. The primary mission of STS-93 is the release of the Chandra X-ray Observatory, which will allow scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. The new telescope is 20 to 50 times more sensitive than any previous X-ray telescope and is expected to unlock the secrets of supernovae, quasars and black holes.

  11. 非线性STS,工程研究和工程形塑的主导性意象--对盖瑞·唐尼教授的访谈%Nonlinear STS, Engineering Studies and Dominant Images of Engineering Formation:--An Interview with Professor Gary Downey

    Institute of Scientific and Technical Information of China (English)

    盖瑞·唐尼; 张志会

    2015-01-01

    As Alumni Distinguished Professor at Virginia tech, Professor Gary Downey is current President of the Society for Social Studies of Science (4S;2013-2015), and a renowned scholar in the fields of STS and engineering studies. In this interview, Professor Downey describes how he is leading 4S initia-tives to call attention to STS scholarship that goes beyond the linear model of knowledge creation, diffusion, and utilization, or what Downey calls “nonlinear STS.” Having been trained initially as a mechanical engi-neer and cultural anthropologist studying controversies over nuclear power and nuclear waste disposal, he describes how he developed the concept and practice of “critical participation.” His critical participation in engineering formation (engineering education and training) began with critical analysis of the “dominant image” of engineering problem solving as U.S. engineers have understood it since the 1960s. Downey also questioned how and why engineering remained largely invisible in the emergence of STS as a scholarly field, except as a synonym for technology or as a metaphor for the heterogeneous construction of new technologies. Difficulties he encountered in teaching became crucial sites for making visible what the dominant image of engineering problem solving hid in engineering formation, and nominating an alternative image of engi-neering as collaborative problem definition and solution (PDS). He is now re-theorizing the“travel”of STS knowledge and expertise by helping the PDS image and associated practices scale up across localized arenas of engineering formation and work. Downey also explains how he joined with other researchers to establish and build Engineering Studies as an interdisciplinary field of research committed to both conventional and nonlinear scholarship. Key steps included founding the International Network for Engineering Studies (INES), organizing INES workshops, and creating the SCI journal Engineering Studies

  12. Support of Study on Engineering Technology from Physics and Mathematics

    CERN Document Server

    Mynbaev, Djafar K; Kezerashvili, Roman Ya; Liou-Mark, Janet

    2008-01-01

    An approach that provides students with an ability to transfer learning in physics and mathematics to the engineering-technology courses through e-teaching and e-learning process is proposed. E-modules of courses in mathematics, physics, computer systems technology, and electrical and telecommunications engineering technology have been developed. These modules being used in the Blackboard and Web-based communications systems create a virtual interdisciplinary learning community, which helps the students to transfer knowledge from physics and mathematics to their study in engineering technology.

  13. DOE technology information management system database study report

    Energy Technology Data Exchange (ETDEWEB)

    Widing, M.A.; Blodgett, D.W.; Braun, M.D.; Jusko, M.J.; Keisler, J.M.; Love, R.J.; Robinson, G.L. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.

    1994-11-01

    To support the missions of the US Department of Energy (DOE) Special Technologies Program, Argonne National Laboratory is defining the requirements for an automated software system that will search electronic databases on technology. This report examines the work done and results to date. Argonne studied existing commercial and government sources of technology databases in five general areas: on-line services, patent database sources, government sources, aerospace technology sources, and general technology sources. First, it conducted a preliminary investigation of these sources to obtain information on the content, cost, frequency of updates, and other aspects of their databases. The Laboratory then performed detailed examinations of at least one source in each area. On this basis, Argonne recommended which databases should be incorporated in DOE`s Technology Information Management System.

  14. What is technology? A study of fifth and eighth grade student ideas about the Nature of Technology

    Science.gov (United States)

    Digironimo, Nicole

    Most, if not all, standards for science and technology education and curriculum indicate that knowledge of the Nature of Technology is an educational goal, yet the literature lacks an established definition for the Nature of Technology. Additionally, the research on student ideas about the Nature of Technology is insufficient. After reviewing the literature on science and technology education, the philosophy of technology, and the history of technology, this study presents an internally consistent definition for the Nature of Technology. This definition illustrates how the Nature of Technology includes five dimensions: Technology as Artifacts; Technology as a Creation Process; Technology as a Human Practice; The History of Technology; and The Current Role of Technology. Using an interview protocol developed for this study, a small group of 5th and 8th grade students were interviewed to ascertain their ideas about the Nature of Technology. The results indicate that there are a variety of ideas present in the thinking of young people. All of the participants expressed one of two ideas about technological artifacts: technological artifacts are electronic or technological artifacts are invented. All of the participants identified particular skills needed to invent technological artifacts; some of the participants included mobility and concluded that disabled people cannot be inventors. Despite their experiences with technological artifacts (including educational technology tools), a few of the participants were uncertain whether they would identify themselves as technological. More than half of the participants did not believe older artifacts can still be considered technology. Most of the participants were apprehensive about our technological future; the main issue expressed by the participants was the environment. Other than environmental concerns, most of the participants were unable to identify global issues regarding technological use and development. Overall

  15. A Case Study of Technology-Enhanced Historical Inquiry

    Science.gov (United States)

    Yang, Shu Ching

    2009-01-01

    The paper describes the integration of web resources and technology as instructional and learning tools in oral history projects. The computer-mediated oral history project centred around interviews with community elders combined with new technologies to engage students in authentic historical inquiry. The study examined learners' affective…

  16. Teacher Technology Use and State Accountability Scores: A Correlational Study

    Science.gov (United States)

    Borjes, Robert L.

    2012-01-01

    This was an exploratory study that sought to find a positive correlation between teachers' perceived use of technology and successful test scores as measured by state indicators. As more districts purchase expensive technology to assist teachers in reaching the lofty goals set by the state, it is important for administrators and local school board…

  17. A study on briquetting technology for Vietnamese coal

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Pil Chong; Yang, Jung Il; Hwang, Seon Kook; Cho, Ken Joon; Choi, Yeon Ho; Shin, Hee Young; Kim, Sang Bae; Bae, Kwang Hyun [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

    1995-12-01

    Vietnam reserves abundant, high quality anthracite resources. Nevertheless, Vietnam is facing with serious problem of deforestation, because most of the people use wood and agricultural waste for the family cooking purpose. In order to improve the problem, Vietnam government has established the National Project (KD-03) for enlargement of utilization of Vietnamese coal and also assigned the Institute of Research on Mining Technology(IRMT) to develop the briquetting technology for the use of Vietnamese coal. In accordance, IRMT prepared a Memorandum of Understanding on development of briquetting technology for Vietnamese coal with KIGAM, which preserve sufficient technical know-how on coal briquetting technology. The objective of this project is to develop briquetting technology of Vietnamese coal for cooking purpose and transfer the developed technology to related industrial sector. Eventually it expects to enlarge utilization of Vietnamese coal, reduce deforestation and increase labour employment. This project studied following items on development of coal briquetting technology for Vietnamese cooking purpose: (1) study on properties of Vietnamese coal, (2) study on briquetting technology of Vietnamese coal, (3) study on combustion of Vietnamese coal briquette, (4) preliminary investigation of coal briquette market for industrial use. Besides cooking purpose of Vietnamese coal briquette, Vietnamese coal is also identified to be utilized for small scale industrial use by preliminary investigation. (author). 9 refs., 30 tabs.

  18. A Case Study of Technology-Enhanced Historical Inquiry

    Science.gov (United States)

    Yang, Shu Ching

    2009-01-01

    The paper describes the integration of web resources and technology as instructional and learning tools in oral history projects. The computer-mediated oral history project centred around interviews with community elders combined with new technologies to engage students in authentic historical inquiry. The study examined learners' affective…

  19. Study on technology for minimizing radiation risk

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jeong Ho; Kim, In Gyu; Kim, Jin Kyu; Lee, Kang Suk; Kim, Kug Chan; Chun, Ki Chung

    1997-01-01

    Apoptosis, also called programmed cell death to discriminate it from necrosis, is characterized by : chromatin condensation, apoptotic body formation, fragmentation of DNA into oligonucleosome sized pieces, swelling and progressive cell degradation. We examined morphological and biochemical changes of T-lymphocytes following gamma irradiation exposure. The results are followings. (1) Murine lymphocytes have several characteristics : The irradiated cells undergo morphological and biochemical changes characteristic of apoptosis, causing growth delay. (0.01, 0.1, 1.0 Gy) (2) The onset of DNA fragmentation in cells occurs after one more cell divisions. (3) DNA fragmentation in cells occurs in all irradiated group (0.1, 1.0, 2.0, 4.0 Gy, 24 hours following gamma radiation exposure) (4) Apoptotic bodies were detected by confocal microscope with ease when compared with electron microscope. For the developing technology for minimizing radiation damage, the following experimental works have been done. (1) Establishment of experimental system for pre-screening of radioprotectants - Screening of protective substances using TSH bioindicator - Efficacy test of some radioprotective materials (2) TSH bioindicator system can make a scientific role in screening unknown materials for their possible radioprotective effect. (author). 42 refs., 3 tabs., 9 figs.

  20. Technology and alternative cancer therapies: an analysis of heterodoxy and constructivism.

    Science.gov (United States)

    Hess, D J

    1996-12-01

    Theories of the construction of technology are reviewed from the wider interdisciplinary conversation known as science and technology studies (STS) and from the growing field of the anthropology of science and technology. These theories are used to contribute to research situated at the intersection of the anthropology of alternative medicine and of medical technologies. Cases drawn from the research tradition on microbial theories of cancer are considered to show how unorthodox medical theories become embedded in technologies through choices in microscope design and treatment technologies. In turn, the technologies contribute to the heterodox standing of the researchers, their research, and their therapies.

  1. Technology-Enhanced Mathematics Education for Creative Engineering Studies

    OpenAIRE

    Triantafyllou, Eva; Timcenko, Olga

    2014-01-01

    This project explores the opportunities and challenges of integrating digital technologies in mathematics education in creative engineering studies. Students in such studies lack motivation and do not perceive the mathematics the same way as mathematics students do. Digital technologies offer new possibilities for mathematics representation, for interacting with mathematical concepts, and for positioning mathematics in the context of their studies. First, we are going to investigate how mathe...

  2. Encountering social work through STS

    DEFF Research Database (Denmark)

    Birk, Rasmus

    Encountering social work through STS: Marginalization, materials and knowledge In this presentation, I attempt to produce an encounter between STS and social work. Concretely, I focus on the subset of social work called “local community work”, which in Denmark is used to intervene on marginalized...... and their inhabitants. Local community work derives from this assemblage of policy and knowledge as the “social” intervention commonly deployed. Based on an ethnographic field work, I examine how local community practices attempt to interpellate specific futures for individuals and their local environments. I do...... this by examining the materials and types of knowledge that participate in shaping local community work practices and encounters between local community workers and residents in marginalized housing areas. Through this analysis, I argue that social work research can benefit from orienting itself more concretely...

  3. Planetary Science Technology Infusion Study: Findings and Recommendations Status

    Science.gov (United States)

    Anderson, David J.; Sandifer, Carl E., II; Sarver-Verhey, Timothy R.; Vento, Daniel M.; Zakrajsek, June F.

    2014-01-01

    The Planetary Science Division (PSD) within the National Aeronautics and Space Administrations (NASA) Science Mission Directorate (SMD) at NASA Headquarters sought to understand how to better realize a scientific return on spacecraft system technology investments currently being funded. In order to achieve this objective, a team at NASA Glenn Research Center was tasked with surveying the science and mission communities to collect their insight on technology infusion and additionally sought inputs from industry, universities, and other organizations involved with proposing for future PSD missions. This survey was undertaken by issuing a Request for Information (RFI) activity that requested input from the proposing community on present technology infusion efforts. The Technology Infusion Study was initiated in March 2013 with the release of the RFI request. The evaluation team compiled and assessed this input in order to provide PSD with recommendations on how to effectively infuse new spacecraft systems technologies that it develops into future competed missions enabling increased scientific discoveries, lower mission cost, or both. This team is comprised of personnel from the Radioisotope Power Systems (RPS) Program and the In-Space Propulsion Technology (ISPT) Program staff.The RFI survey covered two aspects of technology infusion: 1) General Insight, including: their assessment of barriers to technology infusion as related to infusion approach; technology readiness; information and documentation products; communication; integration considerations; interaction with technology development areas; cost-capped mission areas; risk considerations; system level impacts and implementation; and mission pull. 2) Specific technologies from the most recent PSD Announcements of Opportunities (AOs): The Advanced Stirling Radioisotope Generator (ASRG), aerocapture and aeroshell hardware technologies, the NASA Evolutionary Xenon Thruster (NEXT) ion propulsion system, and the

  4. STS-53 Launch and Landing

    Science.gov (United States)

    1992-01-01

    Footage of various stages of the STS-53 Discovery launch is shown, including shots of the crew at breakfast, getting suited up, and departing to board the Orbiter. The launch is seen from many vantage points, as is the landing. On-orbit activities show the crew performing several medical experiments, such as taking a picture of the retina and measuring the pressure on the eyeball. One crewmember demonstrates how to use the rowing machine in an antigravity environment.

  5. STS-69 Clears the tower

    Science.gov (United States)

    1995-01-01

    A pack of astronauts that run under the banner Dog Crew II heads for the stars. Liftoff of the Space Shuttle Endeavour from Launch Pad 39A occurred at 11:09:00.052 a.m. EDT, Sept. 7, 1995. 'Every dog has its day and today is your day,' KSC Orbiter Test Conductor Roger Gillette pledged to STS-69 Mission Commander David M. Walker, Pilot Kenneth D. Cockrell, Payload Commander James S. Voss and Mission Specialists Michael L. Gernhardt and James H. Newman prior to launch. The STS-69 astronaut crew developed a strong sense of comaraderie as they went through their flight training, and dubbed themselves the Dog Crew II to carry on a tradition that arose during an earlier Shuttle flight -- STS-53 -- to which both Voss and Walker were assigned. Each crew member adopted a dog-theme name: Walker is Red Dog; Cockrell, Cujo; Voss, Dogface; Newman, Pluto; and Gernhardt, the only space rookie, Underdog. A special patch, featuring a bulldog in a doghouse shaped like the Space Shuttle, was designed for the astronauts and other flight team members to wear. The Dog Crew II is embarking on an 11-day multifaceted mission featuring two free-flying scientific research spacecraft as well as a host of experiments in both the payload bay and the middeck. Also scheduled is an extravehicular activity, or spacewalk.

  6. Simulation study of STS-XYTER front-end electronics in overload situations for the silicon tracking system in the CBM experiment

    Energy Technology Data Exchange (ETDEWEB)

    Balog, Tomas [GSI, Darmstadt (Germany); Collaboration: CBM-Collaboration

    2015-07-01

    In high-rate experiments, as the CBM Experiment at FAIR, a situation can occur in which the data rate temporarily exceeds the available bandwidth. With self-triggered front end electronics such overload situations would lead, without further measures, to uncontrolled data losses and potentially a large number of incomplete events. Mechanisms needed to control data losses and to ensure the collection of complete events can be understood via simulations performed with the hardware description language SystemC. Results from simulations of a simplified front-end electronics for the CBM Silicon Tracking System, based on the STS-XYTER ASIC, are presented. Performed simulations give first insight in the behavior of data flow and data losses in the DAQ system of the CBM experiment. Options and solutions for the data throttling mechanisms at beam conditions required by the CBM experiment are discussed.

  7. Comparative Statistical Study of Some SAP UI Technologies

    Science.gov (United States)

    Berdie, Adela; Osaci, Mihaela; Dan Lemle, Ludovic

    2011-09-01

    The goal of this paper is to present a comparative study on some web UI (User Interface) technologies that involve the creation of web applications on the platform SAP Net Weaver AS 7.01 of the integrated SAP (System Application Products) system. The attention will be directed mainly to the ABAP (Advanced Business Application Programing) development environment and to the Web Dynpro (WD) technologies, Floor Plan Manager (FPM) and Web Client UI. Through this study, we make an assesment regarding the decision of choosing a technology for the realisation of a project which consists of a web application.

  8. Energy and cost saving results for advanced technology systems from the Cogeneration Technology Alternatives Study (CTAS)

    Science.gov (United States)

    Sagerman, G. D.; Barna, G. J.; Burns, R. K.

    1979-01-01

    An overview of the organization and methodology of the Cogeneration Technology Alternatives Study is presented. The objectives of the study were to identify the most attractive advanced energy conversion systems for industrial cogeneration applications in the future and to assess the advantages of advanced technology systems compared to those systems commercially available today. Advanced systems studied include steam turbines, open and closed cycle gas turbines, combined cycles, diesel engines, Stirling engines, phosphoric acid and molten carbonate fuel cells and thermionics. Steam turbines, open cycle gas turbines, combined cycles, and diesel engines were also analyzed in versions typical of today's commercially available technology to provide a base against which to measure the advanced systems. Cogeneration applications in the major energy consuming manufacturing industries were considered. Results of the study in terms of plant level energy savings, annual energy cost savings and economic attractiveness are presented for the various energy conversion systems considered.

  9. STUDY OF FACTORS AFFECTING CUSTOMER BEHAVIOUR USING BIG DATA TECHNOLOGY

    OpenAIRE

    Prabin Sahoo; Dr. Nilay Yajnik

    2014-01-01

    Big data technology is getting momentum recently. There are several articles, books, blogs and discussion points to various facets of big data technology. The study in this paper focuses on big data as concept, and insights into 3 Vs such as Volume, Velocity and Variety and demonstrates their significance with respect to factors that can be processed using big data for studying customer behaviour for online users.

  10. System Study for Axial Vane Engine Technology

    Science.gov (United States)

    Badley, Patrick R.; Smith, Michael R.; Gould, Cedric O.

    2008-01-01

    The purpose of this engine feasibility study was to determine the benefits that can be achieved by incorporating positive displacement axial vane compression and expansion stages into high bypass turbofan engines. These positive-displacement stages would replace some or all of the conventional compressor and turbine stages in the turbine engine, but not the fan. The study considered combustion occurring internal to an axial vane component (i.e., Diesel engine replacing the standard turbine engine combustor, burner, and turbine); and external continuous flow combustion with an axial vane compressor and an axial vane turbine replacing conventional compressor and turbine systems.

  11. Experimental study on ceramic membrane technology for onboard oxygen generation

    Institute of Scientific and Technical Information of China (English)

    Jiang Dongsheng; Bu Xueqin; Sun Bing; Lin Guiping; Zhao Hongtao; Cai Yan; Fang Ling

    2016-01-01

    The ceramic membrane oxygen generation technology has advantages of high concentra-tion of produced oxygen and potential nuclear and biochemical protection capability. The present paper studies the ceramic membrane technology for onboard oxygen generation. Comparisons are made to have knowledge of the effects of two kinds of ceramic membrane separation technologies on oxygen generation, namely electricity driven ceramic membrane separation oxygen generation technology (EDCMSOGT) and pressure driven ceramic membrane separation oxygen generation technology (PDCMSOGT). Experiments were conducted under different temperatures, pressures of feed air and produced oxygen flow rates. On the basis of these experiments, the flow rate of feed air, electric power provided, oxygen recovery rate and concentration of produced oxygen are compared under each working condition. It is concluded that the EDCMSOGT is the oxygen generation means more suitable for onboard conditions.

  12. Experimental study on ceramic membrane technology for onboard oxygen generation

    Directory of Open Access Journals (Sweden)

    Jiang Dongsheng

    2016-08-01

    Full Text Available The ceramic membrane oxygen generation technology has advantages of high concentration of produced oxygen and potential nuclear and biochemical protection capability. The present paper studies the ceramic membrane technology for onboard oxygen generation. Comparisons are made to have knowledge of the effects of two kinds of ceramic membrane separation technologies on oxygen generation, namely electricity driven ceramic membrane separation oxygen generation technology (EDCMSOGT and pressure driven ceramic membrane separation oxygen generation technology (PDCMSOGT. Experiments were conducted under different temperatures, pressures of feed air and produced oxygen flow rates. On the basis of these experiments, the flow rate of feed air, electric power provided, oxygen recovery rate and concentration of produced oxygen are compared under each working condition. It is concluded that the EDCMSOGT is the oxygen generation means more suitable for onboard conditions.

  13. Thermodynamic benchmark study using Biacore technology

    NARCIS (Netherlands)

    Navratilova, I.; Papalia, G.A.; Rich, R.L.; Bedinger, D.; Brophy, S.; Condon, B.; Deng, T.; Emerick, A.W.; Guan, H.W.; Hayden, T.; Heutmekers, T.; Hoorelbeke, B.; McCroskey, M.C.; Murphy, M.M.; Nakagawa, T.; Parmeggiani, F.; Xiaochun, Q.; Rebe, S.; Nenad, T.; Tsang, T.; Waddell, M.B.; Zhang, F.F.; Leavitt, S.; Myszka, D.G.

    2007-01-01

    A total of 22 individuals participated in this benchmark study to characterize the thermodynamics of small-molecule inhibitor-enzyme interactions using Biacore instruments. Participants were provided with reagents (the enzyme carbonic anhydrase II, which was immobilized onto the sensor surface, and

  14. Cost studies of thermally enhanced in situ soil remediation technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bremser, J.; Booth, S.R.

    1996-05-01

    This report describes five thermally enhanced technologies that may be used to remediate contaminated soil and water resources. The standard methods of treating these contaminated areas are Soil Vapor Extraction (SVE), Excavate & Treat (E&T), and Pump & Treat (P&T). Depending on the conditions at a given site, one or more of these conventional alternatives may be employed; however, several new thermally enhanced technologies for soil decontamination are emerging. These technologies are still in demonstration programs which generally are showing great success at achieving the expected remediation results. The cost savings reported in this work assume that the technologies will ultimately perform as anticipated by their developers in a normal environmental restoration work environment. The five technologies analyzed in this report are Low Frequency Heating (LF or Ohmic, both 3 and 6 phase AC), Dynamic Underground Stripping (DUS), Radio Frequency Heating (RF), Radio Frequency Heating using Dipole Antennae (RFD), and Thermally Enhanced Vapor Extraction System (TEVES). In all of these technologies the introduction of heat to the formation raises vapor pressures accelerating contaminant evaporation rates and increases soil permeability raising diffusion rates of contaminants. The physical process enhancements resulting from temperature elevations permit a greater percentage of volatile organic compound (VOC) or semi- volatile organic compound (SVOC) contaminants to be driven out of the soils for treatment or capture in a much shorter time period. This report presents the results of cost-comparative studies between these new thermally enhanced technologies and the conventional technologies, as applied to five specific scenarios.

  15. Study and application of temporal index technology

    Institute of Scientific and Technical Information of China (English)

    YE XiaoPing; TANG Yong; CHEN LuoWu; GUO Huan; ZHU Jun; CHEN KaiYuan

    2009-01-01

    This paper addresses the mathematical relation on a set of periods and temporal indexing constructions as well as their applications. First we introduce two concepts, i.e. the temporal connection and temporal inclusion, which are equivalence relation and preorder relation respectively. Second, by studying some basic topics such as the division of "large" equivalence classes and the overlaps of preorder relational sets, we propose a temporal data index model (TDIM) with a tree-structure consisting of a root node, equivalence class nodes and linearly ordered branch nodes. Third, we study algorithms for the temporal querying and incremental updating as well as dynamical management within the framework of TDIM. Based on a proper mathematical supporting, TDIM can be applied to researching some significant practical cases such as temporal relational and temporal XML data and so on.

  16. A study on the nuclear technology policy

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Maeng Ho; Ham, C. H.; Kim, H. J.; Chung, W. S.; Lee, T. J.; Lee, B. O.; Yun, S. W.; Choi, Y. M.; Eom, T. Y

    1998-01-01

    This study analyzed the major issues as the research activities for the support of establishment and implementation of national policy. The analyses were focused on the recommendations of the responsive direction of national policy in positive and effective manners in accordance with the changes of international nuclear affairs. This study also analyzed the creation of environmental foundation for effective implementation of the national policy and national R and D investment such as securing national consensus and openings of policy information to the public. The major results of the role and position of nuclear policy, trends of nuclear policy and nuclear R and D activities of USA, France, Japan, Asian developing countries etc. and international trends of small- and medium-sized reactor as well as spin-offs of nuclear R and D activities, were analyzed. (author). 66 refs., 27 tabs., 15 figs

  17. Massachusetts Institute of Technology Security Studies Program

    Science.gov (United States)

    2006-01-01

    postdoctoral fellowships at the Olin Institute for Strategic Studies at Harvard University and the Center for International Security and Cooperation...government and business have frequently invited him to speak on Middle Eastern affairs. JEANNE GUILLEMIN’s training in sociology and anthropology led to her...been the recipient of several scholarships and awards, including two NATO Fellowships and two Fulbright Scholarships. In 1995, he was named to the

  18. Spring 2006. Industry Study. Information Technology Industry

    Science.gov (United States)

    2006-01-01

    Telekom , U.S. telecom providers are domestically owned and well- positioned to support future transmission requirements. B. Networking: The...Philippines, Malaysia , Thailand and Vietnam (ACM Task Force, 2006). According to a recent Global Insights study (2005) sponsored by the Information...highly qualified Singaporeans and skilled labor C-3 imported largely from Malaysia . English language skills are universal in Singapore, and a liberal

  19. Students’ Attitudes toward Science, Technology, and Society, Evaluated through a Multiple-Response Model

    Directory of Open Access Journals (Sweden)

    Ángel Vázquez Alonso

    2006-11-01

    Full Text Available This article is a study of the application of the Questionnaire of Opinions on Science, Technology and Society (COCTS with a new methodology based on a multiple-response model, to achieve a more valid and meaningful assessment of attitudes regarding issues of science, technology & society (STS, in a sample of high school students. It presents the application of this methodology and its ability to evaluate more precisely, both qualitatively and quantitatively, the STS attitudes of students whose overall level is mediocre, since they are outstanding for their lesser adaptation, and their beliefs about science epistemology. It also shows the lack of equivalence between isolated statements used to assess attitudes and their methodological implications for research on attitudes. Finally, it suggests some implications of the results for teaching STS themes in the school.

  20. Study on reliability technology of contactor relay

    Institute of Scientific and Technical Information of China (English)

    LIU Guo-jin; ZHAO Jing-ying; WANG Hai-tao; YANG Chen-guang; SUN Shun-li

    2007-01-01

    In this paper, the reliability of contactor relay is studied. There are three main parts about reliability test and analysis. First, in order to analyze reliability level of contact relay, the failure ratio ranks are established as index base on the product level. Second, the reliability test method is put forward. The sample plan of reliability compliance test is gained from reliability sample theory. The failure criterion is ensured according to the failure modes of contactor relay. Third, after reliability test experiment, the analysis of failure physics is made and the failure reason is found.

  1. Study On Machining Processing Technology Risk Control

    Institute of Scientific and Technical Information of China (English)

    Li Xiqing

    2015-01-01

    In the industrial production process,only to ful y guarantee the machining production safety, it can been ensured that the smooth completion of machining process.Under this back ground,in the machining production process,the machinery processing safety would been ful y concerned,several factors, which may lead to the problem of mechanical processing and production process,were analyzed,and the relevant control strategies were researched.In view of this situation,this paper wil specifical y combined with the machining process characteristics to study the machining process manufacturability risk control.

  2. Cosmetology Studies. Guide to Standards and Implementation. Career & Technology Studies.

    Science.gov (United States)

    Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

    This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in cosmetology, use technology in the cosmetology field effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs in the field. The first section provides a program rationale and…

  3. A correlative STS: lessons from a Chinese medical practice.

    Science.gov (United States)

    Lin, Wen-Yuan; Law, John

    2014-12-01

    How might Science and Technology Studies learn more from the intersection between 'Western' and 'other' forms of knowledge? In this article, we use Eduardo Viveiros de Castro's writing on equivocal translation to explore a moment of encounter in a Chinese Medical consultation in Taiwan in which a practitioner hybridizes Chinese Medicine and biomedicine. Our description is symmetrical, but creates a descriptive equivocation in which 'Western' analytical terms are used to describe a 'Chinese' medical reality. Drawing on the history of Chinese Medicine, we argue that the latter is not analytical, but 'correlative' in a specifically 'Chinese' manner that explores patternings, flows, and propensities in local collections of things and symptoms. In particular, it both handles difference without seeking to unearth stable causal mechanisms and absorbs new elements including relevant features of biomedicine. We conclude by briefly considering the scope of a possible post-colonial and 'correlative' STS and show that a 'correlative' description of the same Chinese Medical consultation would differ markedly from one making use of 'Western' analytical assumptions.

  4. STS-93 Pilot Ashby takes part in emergency egress training

    Science.gov (United States)

    1999-01-01

    STS-93 Pilot Jeffrey S. Ashby pauses for the photographer before climbing into an M-113 armored personnel carrier at the launch pad to take part in emergency egress training. In preparation for their mission, the STS-93 crew are participating in Terminal Countdown Demonstration Test activities that also include a launch-day dress rehearsal culminating with a simulated main engine cut-off. Others in the crew are Commander Eileen M. Collins and Mission Specialists Steven A. Hawley (Ph.D.), Catherine G. Coleman (Ph.D.), and Michel Tognini of France, who represents the Centre National d'Etudes Spatiales (CNES). Collins is the first woman to serve as a mission commander. The primary mission of STS-93 is the release of the Chandra X-ray Observatory, which will allow scientists from around the world to obtain unprecedented X-ray images of exotic environments in space to help understand the structure and evolution of the universe. Chandra is expected to provide unique and crucial information on the nature of objects ranging from comets in our solar system to quasars at the edge of the observable universe. Since X-rays are absorbed by the Earth's atmosphere, space-based observatories are necessary to study these phenomena and allow scientists to analyze some of the greatest mysteries of the universe. The targeted launch date for STS-93 is no earlier than July 20 at 12:36 a.m. EDT from Launch Pad 39B.

  5. Gold deposition on pyrite and the common sulfide minerals: An STM/STS and SR-XPS study of surface reactions and Au nanoparticles

    Science.gov (United States)

    Mikhlin, Yuri L.; Romanchenko, Alexander S.

    2007-12-01

    Gold species spontaneously deposited on pyrite and chalcopyrite, pyrrhotite, galena, sphalerite from HAuCl 4 solutions at room temperature, as well as the state of the reacted mineral surfaces have been characterized using synchrotron radiation X-ray photoelectron spectroscopy (SR-XPS), scanning tunneling microscopy and tunneling spectroscopy (STM/STS). The deposition of silver from 10 -4 M AgNO 3 has been examined for comparison. Gold precipitates as metallic nanoparticles (NPs) from about 3 nm to 30 nm in diameter, which tends to aggregate forming larger particles, especially on pyrite. The Au 4f binding energies increase up to 1 eV with decreasing size of individual Au 0 NPs, probably due to the temporal charging in the final state. Concurrently, a positive correlation between the tunneling current and the particle size was found in STS. Both these size effects were observed for unusually large, up to 20 nm Au particles. In contrast, silver deposited on the minerals as nanoparticles of semiconducting sulfide showed no shifts of photoelectron lines and different tunneling spectra. The quantity of gold deposited on pyrite and other minerals increased with time; it was lower for fracture surfaces and it grew if minerals were moderately pre-oxidized, while the preliminary leaching in Fe(III)-bearing media inhibited the following Au deposition. After the contact of polished minerals with 10 -4 M AuCl4- solution (pH 1.5) for 10 min, the gold uptake changed in the order CuFeS 2 > ZnS > PbS > FeAsS > FeS 2 > Fe 7S 8. It was noticed that the open circuit (mixed) potentials of the minerals varied in approximately the same order, excepting chalcopyrite. We concluded that the potentials of minerals were largely determined by Fe(II)/Fe(III) couple, whereas the reduction of gold complexes had a minor effect. As a result, the deposition of gold, although it proceeded via the electrochemical mechanism, increased with decreasing potential. This suggests, in particular, that the

  6. STS-111 Crew Training Clip

    Science.gov (United States)

    2002-05-01

    The STS-111 Crew is in training for space flight. The crew consists of Commander Ken Cockrell, Pilot Paul Lockhart, Mission Specialists Franklin Chang-Diaz and Philippe Perrin. The crew training begins with Post Insertion Operations with the Full Fuselage Trainer (FFT). Franklin Chang-Diaz, Philippe Perrin and Paul Lockhart are shown in training for airlock and Neutral Buoyancy Lab (NBL) activities. Bailout in Crew Compartment Training (CCT) with Expedition Five is also shown. The crew also gets experience with photography, television, and habitation equipment.

  7. STS-109 Crew Interviews - Carey

    Science.gov (United States)

    2002-01-01

    STS-109 pilot Duane G. Carey is seen during a prelaunch interview. He answers questions about his inspiration to become an astronaut and his career path. He gives details on the mission's goals and significance, as well as an extended description of his role in the Orbiter's return landing. As its primary objective, this mission has the maintenance of the Hubble Space Telescope (HST). Following the Columbia Orbiter's rendezvous with the telescope, extravehicular activities (EVA) will focus on repairs to and augmentation of the HST.

  8. STS-109 Crew Interviews - Carey

    Science.gov (United States)

    2002-01-01

    STS-109 pilot Duane G. Carey is seen during a prelaunch interview. He answers questions about his inspiration to become an astronaut and his career path. He gives details on the mission's goals and significance, as well as an extended description of his role in the Orbiter's return landing. As its primary objective, this mission has the maintenance of the Hubble Space Telescope (HST). Following the Columbia Orbiter's rendezvous with the telescope, extravehicular activities (EVA) will focus on repairs to and augmentation of the HST.

  9. Learning to make technology work - a study of learning in technology demonstration projects

    DEFF Research Database (Denmark)

    Sutherland Olsen, Dorothy; Andersen, Per Dannemand

    2014-01-01

    Building working demonstrations of new technologies within sustainable energy and transport has become an important activity in the move towards a more energy efficient society. The work involved in building these demonstrations is usually organised in a project with a variety of different...... participants, including users. The aim of the project is usually to test the technology and promote changes in users habits, while learning is frequently cited as the main outcome. In this paper we review existing studies of demonstration projects and try to gain an overview of the main aims and effects...

  10. Study on precision cutting technology of complex shape microparts

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Relatively to non-traditional and high-energy-beam micro-manufacturing technique, the micro-cutting technology has many merits. For instance, the machining range is bigger, the cost of equipments is much lower, and the productivity and machining accuracy are higher. Therefore, the micro-cutting technology will take an important effect on the machining technique of complex shape microparts. In this paper, based on selfly-developed machine tool, the precision cutting technology of complex shape microparts made of metal material was studied by analyzing the modeling method on complex shape, the means of toolpaths layout and the optimal selection for cutting parameters. On the basis of above work, a typical duralumin specimen of high precision, low surface roughness and complex shape micropart was manufactured. This result will provide favorable technical support for farther research on the micro-cutting technology.

  11. Compact Gamma-ray Source Technology Development Study

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, S G; Gibson, D J; Rusnak, B

    2009-09-25

    This study focuses on the applicability of current accelerator and laser technologies to the construction of compact, narrow bandwidth, gamma-ray sources for DHS missions in illicit materials detection. It also identifies research and development areas in which advancement will directly benefit these light sources. In particular, we review the physics of Compton scattering based light sources and emphasize the source properties most important to Nuclear Resonance Fluorescence (NRF) applications of interest. The influences of laser and electron beam properties on the light source are examined in order to evaluate the utility of different technologies for this application. Applicable bulk and fiber-based laser systems and laser recirculation technologies are discussed and Radio Frequency (RF) Linear Accelerator (linac) technologies are examined to determine the optimal frequency and pulse formats achievable.

  12. Status and prospects of frozen soil studies using CT technology

    Institute of Scientific and Technical Information of China (English)

    ShiJie Chen; ShuPing Zhao; Wei Ma; QianTao Zhu; LiLi Xing

    2014-01-01

    This paper introduces the characteristics of Computed Tomography (CT) technology and reviews its history, current situation, representative achievements, and use of using CT technology on frozen soil study, including auxiliary equipment specially de-signed for frozen soil studies. CT numbers are used to analyze frozen soil internal structure change, defining and exploring dam-age evolution, and use of CT images on observing soil mesostructure. Finally, this paper presents existing problems confronted by using CT in frozen soil studies, possible solutions and challenges, among which, we introduce high quality CT image processing for frozen soils, and relations between CT number change and each component change on frozen soil samples within the region of interest. It is shown that present CT technology is one of the most ideal and effective technology to study frozen soil mesostructure using non-destructive testing. CT technology will play a key role in the study and development in the field of frozen soil by means of auxiliary equipment and the digital imaging processing.

  13. Simulation studies for the evaluation of health information technologies

    DEFF Research Database (Denmark)

    Ammenwerth, Elske; Hackl, Werner; Binzer, Kristine

    2012-01-01

    It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management...

  14. Space Transportation System (STS)-133/External Tank (ET)-137 Intertank (IT) Stringer Cracking Issue and Repair Assessment: Proximate Cause Determination and Material Characterization Study

    Science.gov (United States)

    Piascik, Robert S.

    2011-01-01

    Several cracks were detected in stringers located beneath the foam on the External Tank (ET) following the launch scrub of Space Transportation System (STS)-133 on November 5, 2010. The stringer material was aluminum-lithium (AL-Li) 2090-T83 fabricated from sheets that were nominally 0.064 inches thick. The mechanical properties of the stringer material were known to vary between different material lots, with the stringers from ET-137 (predominately lots 620853 and 620854) having the highest yield and ultimate stresses. Subsequent testing determined that these same lots also had the lowest fracture toughness properties. The NASA Engineering and Safety Center (NESC) supported the Space Shuttle Program (SSP)-led investigation. The objective of this investigation was to develop a database of test results to provide validation for structural analysis models, independently confirm test results obtained from other investigators, and determine the proximate cause of the anomalous low fracture toughness observed in stringer lots 620853 and 620854. This document contains the outcome of the investigation.

  15. Integrating Educational Technologies into Teacher Education: A Case Study

    Science.gov (United States)

    Rawlins, Peter; Kehrwald, Benjamin

    2014-01-01

    This article is a case study of an integrated, experiential approach to improving pre-service teachers' understanding and use of educational technologies in one New Zealand teacher education programme. The study examines the context, design and implementation of a learning activity which integrated student-centred approaches, experiential…

  16. Multiple Case Study on Cyberbullying's Impacts on Adolescent Technology Use

    Science.gov (United States)

    Thompson, Kent W.

    2013-01-01

    This multiple case study focused on whether and how cyberbullying had an impact on students' use of technology. Analysis of the lived experiences of the participants in this study added depth to the quantitative research previously conducted by others in this area. The conceptual framework was based on social learning theory, which suggested that…

  17. Multiple Case Study on Cyberbullying's Impacts on Adolescent Technology Use

    Science.gov (United States)

    Thompson, Kent W.

    2013-01-01

    This multiple case study focused on whether and how cyberbullying had an impact on students' use of technology. Analysis of the lived experiences of the participants in this study added depth to the quantitative research previously conducted by others in this area. The conceptual framework was based on social learning theory, which suggested that…

  18. Integrating Educational Technologies into Teacher Education: A Case Study

    Science.gov (United States)

    Rawlins, Peter; Kehrwald, Benjamin

    2014-01-01

    This article is a case study of an integrated, experiential approach to improving pre-service teachers' understanding and use of educational technologies in one New Zealand teacher education programme. The study examines the context, design and implementation of a learning activity which integrated student-centred approaches, experiential…

  19. Hurdling barriers through market uncertainty: Case studies ininnovative technology adoption

    Energy Technology Data Exchange (ETDEWEB)

    Payne, Christopher T.; Radspieler Jr., Anthony; Payne, Jack

    2002-08-18

    The crisis atmosphere surrounding electricity availability in California during the summer of 2001 produced two distinct phenomena in commercial energy consumption decision-making: desires to guarantee energy availability while blackouts were still widely anticipated, and desires to avoid or mitigate significant price increases when higher commercial electricity tariffs took effect. The climate of increased consideration of these factors seems to have led, in some cases, to greater willingness on the part of business decision-makers to consider highly innovative technologies. This paper examines three case studies of innovative technology adoption: retrofit of time-and-temperature signs on an office building; installation of fuel cells to supply power, heating, and cooling to the same building; and installation of a gas-fired heat pump at a microbrewery. We examine the decision process that led to adoption of these technologies. In each case, specific constraints had made more conventional energy-efficient technologies inapplicable. We examine how these barriers to technology adoption developed over time, how the California energy decision-making climate combined with the characteristics of these innovative technologies to overcome the barriers, and what the implications of hurdling these barriers are for future energy decisions within the firms.

  20. Young Adults, Technology, and Weight Loss: A Focus Group Study

    Directory of Open Access Journals (Sweden)

    Janna Stephens

    2015-01-01

    Full Text Available Overweight and obesity are a major concern in young adults. Technology has been integrated into many weight loss interventions; however little is known about the use of this technology in young adults. The purpose of this study was to explore through focus group sessions the opinions of young adults on the use of technology for weight loss. A total of 17 young adults, between 18 and 25 years of age, participated in three focus group sessions. Major results indicated that young adults have very little knowledge on the use of Smartphone technology for weight loss but would like to use this type of technology to help them lose weight. Results also indicated that young adults struggle to make healthy food choices and have priorities that outweigh exercise and they need support and guidance to make better decisions. In conclusion, young adults would be open to using Smartphone technology for weight loss but also need feedback and guidance to help make healthy decisions.

  1. A feasibility study for a manufacturing technology deployment center

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-31

    The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

  2. STS-69 flight day 9 highlights

    Science.gov (United States)

    1995-09-01

    The song, 'He's A Tramp', from the Walt Disney cartoon movie, 'Lady and the Tramp', awakened the astronauts, Cmdr. Dave Walker, Pilot Ken Cockrell, and Mission Specialists Jim Voss, Jim Newman, and Mike Gernhardt, on the ninth day of the STS-69 mission. The Wake Shield Facility (WSF) was again unberthed from the shuttle cargo bay and , using the shuttle's robot arm, held over the side of the shuttle for five hours where it collected data on the electrical field build-up around the spacecraft as part of the Charging Hazards and Wake Studies Experiment (CHAWS). Voss and Gernhardt rehearsed their Extravehicular Activity (EVA) spacewalk, which was planned for the next day. Earth views included cloud cover, a hurricane, and its eye.

  3. Technology spin-offs generation – a multicase study

    Directory of Open Access Journals (Sweden)

    Jonas Mendes Constante

    2014-05-01

    Full Text Available The objective of this study is to understand how small businesses can innovate through the generation of technological spin-offs, identifying motivations, influences and barriers to achieving this phenomenon. Through a qualitative and exploratory study, we analyzed four cases of technological spin-offs in Santa Catarina State. We collected data through field observations, historical data and semi-structured interviews. The main reasons found for spin-offs creation were: diversification and to complement the value chain of the parent company and to ensure greater focus for a specific technology. The main barrier was lack of capital. Government initiatives to support the creation of new businesses, coupled with the organizational culture open to entrepreneurship and investment in R&D, contributed to the development of spin-offs analyzed. This work contributes to the understanding that small and medium-sized technology-based companies are a source of technological spin-offs and can benefit from the occurrence of this process.

  4. Studying the Technology of Creating Cortical Electrode Instruments using the Rapid Prototyping Technology

    Directory of Open Access Journals (Sweden)

    Ablyaz T. R.

    2017-06-01

    Full Text Available This paper shows the results of studying the technology of manufacturing cortical electrode-instruments (EI with the use of indirect methods of the Rapid Prototyping technology. Functional EI prototypes were made by layered synthesis of the photopolymer material with the use of the stereolithography technology (SLA - Stereo Lithography Apparatus. The article is focused on two methods of indirect EI manufacturing. One of the EI prototypes was used for making a molded wax model for hot investment casting, followed by applying copper coating. The second prototype was used for applying copper plating to a prepared current-conductive layer. As a result of EDMing a steel workpiece, both EIs reached the desired depth, which is 1 mm. The copper plating applied to the EI preserves its integrity. Through the use of the casting technology, there is a possibility to cut the economic costs by 35%. Using a prototype with preliminarily applied conductive coating makes it possible to make geometrically-complex EIs.

  5. Study habits and technology use in Italian university students

    Directory of Open Access Journals (Sweden)

    Andrea Poscia

    2015-06-01

    Full Text Available BACKGROUND: Students' ability of learning is influenced by study habits. Among these, the use of technologies has assumed a controversial role. The aim of this paper is to analyse studying approach, the use of technologies and how they affect study habits in a population of university students addressed by the "Sportello Salute Giovani" ("Youth Health Information Desk" questionnaire. METHODS: 16 questions referred to the approach to studying and the use of technologies (number 77-93 were analyzed. Absolute and relative frequencies were calculated. Stratification for sex, age and socio-economic status were performed and Chi square test was used to test the difference between sex, age class and socio-economic groups. RESULTS: 99.7% of students declared to have at least one mobile phone and 68.7% to use smartphones, i-phones and i-pads. Males (20.9% vs 14.9% female, p < 0.05, older students (31.7% among 25-30 years old students vs 21.3% among 18-21 years old, p < 0.05 and students with the highest socio-economic level (87.8% vs 54.2% of the lowest seem more likely to use digital technologies/Internet for educational purposes. CONCLUSION: Our survey revealed that most college students still prefer approach the study using books instead of digital tools, but this attitude is conflicting with how many hours they use computers and surf Internet per weeks. Therefore, further studies are needed to understand better technology influence on study habits and its implication on health.

  6. STS-107 Flight Day 13 Highlights

    Science.gov (United States)

    2003-01-01

    This video shows the activities of the STS-107 crew on flight day 13 of the Columbia orbiter's final mission. The crew members include: Rick Husband, Commander; William McCool, Pilot; Kalpana Chawla, David Brown, Michael Anderson, Laurel Clark, Mission Specialists; Ilan Ramon, Payload Specialist. The primary activities of flight day 13 are spaceborne experiments, including troubleshooting undertaken by Mission Specialist Chawla on the Water Mist Fire Suppression (MIST) experiment. Chawla performs troubleshooting tasks relayed to her by Mission Control. She shows Mission Control the location of air and water in a transparent hose that is part of the atomizer on the exterior of the combustion module. She also changes the atomizer head. All six Space Technology and Research Students (STARS) experiments are profiled in the video. These experiments are on ants, crystal growth in a chemical garden, fish embryos, carpenter bees, spiders, and silkworms. The video also includes a view of the southeast Texas coast near Houston, and a view of Portugal, Spain, Gibraltar, Morocco, and the Sahara Desert. The video ends with an explanation of roses at Mission Control which commemorate astronauts who have died on missions.

  7. STS-52 Space Shuttle mission report

    Science.gov (United States)

    Fricke, Robert W., Jr.

    1992-12-01

    The STS-52 Space Shuttle Program Mission Report provides a summary of the Orbiter, External Tank (ET), Solid Rocket Booster/Redesigned Solid Rocket Motor (SRB/RSRM), and the Space Shuttle main engine (SSME) subsystem performance during the fifty-first flight of the Space Shuttle Program, and the thirteenth flight of the Orbiter vehicle Columbia (OV-102). In addition to the Orbiter, the flight vehicle consisted of the following: an ET (designated as ET-55/LWT-48); three SSME's, which were serial numbers 2030, 2015, and 2034 in positions 1, 2, and 3, respectively; and two SRB's, which were designated BI-054. The lightweight RSRM's that were installed in each SRB were designated 360L027A for the left SRB and 360Q027B for the right SRB. The primary objectives of this flight were to successfully deploy the Laser Geodynamic Satellite (LAGEOS-2) and to perform operations of the United States Microgravity Payload-1 (USMP-1). The secondary objectives of this flight were to perform the operations of the Attitude Sensor Package (ASP), the Canadian Experiments-2 (CANEX-2), the Crystals by Vapor Transport Experiment (CVTE), the Heat Pipe Performance Experiment (HPP), the Commercial Materials Dispersion Apparatus Instrumentation Technology Associates Experiments (CMIX), the Physiological System Experiment (PSE), the Commercial Protein Crystal Growth (CPCG-Block 2), the Shuttle Plume Impingement Experiment (SPIE), and the Tank Pressure Control Experiment (TPCE) payloads.

  8. STS-107 Flight Day 8 Highlights

    Science.gov (United States)

    2003-01-01

    This video shows the activities of the STS-107 crew (Rick Husband, Commander; William McCool, Pilot; Kalpana Chawla, David Brown, Michael Anderson, Laurel Clark, Mission Specialists, Ilan Ramon, Payload Specialist) during flight day 8 of the Columbia orbiter's final flight. The primary activities of flight day 8 are spaceborne experiments. Some background information is given on the SOFBALL (Structure of Flame Balls at Low Lewis-Number) microgravity experiment as footage of the flame balls is shown. The video also shows the MEIDEX (Mediterranean Israeli Dust Experiment) calibrating on the Moon. The six STARS (Space Technology and Research Students) international student experiments are profiled, including experiments on carpenter bees (Liechtenstein), spiders (Australia), silkworms (China), ants (United States), crystal growth (Israel), and fish embryos (Japan). A commercial experiment on roses is also profiled. Astronaut Clark gives a tour of the SpaceHab RDM (Research Double Module), in the space shuttle's payload bay. Astronauts McCool and Ramon take turns on an exercise machine. The video includes a partly cloudy view of the Pacific Ocean.

  9. Case Study – Idling Reduction Technologies for Emergency Service Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Laughlin, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Owens, Russell J. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-01-01

    This case study explores the use of idle reduction technologies (IRTs) on emergency service vehicles in police, fire, and ambulance applications. Various commercially available IRT systems and approaches can decrease, or ultimately eliminate, engine idling. Fleets will thus save money on fuel, and will also decrease their criteria pollutant emissions, greenhouse gas emissions, and noise.

  10. Study on Key 750-kV Transmission Technologies

    Institute of Scientific and Technical Information of China (English)

    Lu Shirong; Liu Bencui; Jin Wen

    2006-01-01

    According to the special environment conditions and characteristics of high altitude in Northwest China, the study on key technologies of 750-Kv transmission and substation projects has gained fruitful results which are imperative not only to the construction of 750-Kv transmission demonstrative project first in China, but also has laid a solid foundation for future UHV transmission constructions.

  11. Business Studies within Design and Technology: Continuity and Progression.

    Science.gov (United States)

    Mathews, Maggie; Swainston, David

    1992-01-01

    Explores the placement of business studies courses within design and technology education programs in the United Kingdom. Reports the sense of isolation felt by business educators. Suggests a progression by which economic concepts could be taught on the various grade levels. Calls for further discussion of the proposal. (SG)

  12. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  13. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  14. Whatever Happened to STS? Pre-Service Physics Teachers and the History of Quantum Mechanics

    Science.gov (United States)

    Nashon, Samson; Nielsen, Wendy; Petrina, Stephen

    2008-01-01

    If issues in the history and philosophy of science and those related to science, technology and society are generally accepted in policy, how ought these be handled in practice? Mandate in policy does not guarantee implementation in practice. Indeed, HPS and STS have for decades been marginalized in the curriculum. Subject areas designated to…

  15. Whatever Happened to STS? Pre-Service Physics Teachers and the History of Quantum Mechanics

    Science.gov (United States)

    Nashon, Samson; Nielsen, Wendy; Petrina, Stephen

    2008-01-01

    If issues in the history and philosophy of science and those related to science, technology and society are generally accepted in policy, how ought these be handled in practice? Mandate in policy does not guarantee implementation in practice. Indeed, HPS and STS have for decades been marginalized in the curriculum. Subject areas designated to…

  16. Advanced Technology Subsonic Transport Study: N+3 Technologies and Design Concepts

    Science.gov (United States)

    Raymer, Daniel P.; Wilson, Jack; Perkins, H. Douglas; Rizzi, Arthur; Zhang, Mengmeng; RamirezPuentes, Alfredo

    2011-01-01

    Conceptual Research Corporation, the Science of the Possible, has completed a two-year study of concepts and technologies for future airliners in the 180-passenger class. This NASA-funded contract was primarily focused on the ambitious goal of a 70 percent reduction in fuel consumption versus the market-dominating Boeing 737-800. The study is related to the N+3 contracts awarded in 2008 by NASA s Aeronautics Research Mission Directorate to teams led by Boeing, GE Aviation, MIT, and Northrop Grumman, but with more modest goals and funding. CRC s contract featured a predominant emphasis on propulsion and fuel consumption, but since fuel consumption depends upon air vehicle design as much as on propulsion technology, the study included notional vehicle design, analysis, and parametric studies. Other NASA goals including NOx and noise reduction are of long-standing interest but were not highlighted in this study, other than their inclusion in the propulsion system provided to CRC by NASA. The B-737-800 was used as a benchmark, parametric tool, and design point of departure. It was modeled in the RDS-Professional aircraft design software then subjected to extensive parametric variations of parasitic drag, drag-due-to-lift, specific fuel consumption, and unsized empty weight. These studies indicated that the goal of a 70 percent reduction in fuel consumption could be attained with roughly a 30 percent improvement in all four parameters. The results were then fit to a Response Surface and coded for ease of use in subsequent trade studies. Potential technologies to obtain such savings were identified and discussed. More than 16 advanced concept designs were then prepared, attempting to investigate almost every possible emerging concept for application to this class airliner. A preliminary assessment of these concepts was done based on their total wetted area after design normalization of trimmed maximum lift. This assessment points towards a Tailless Airliner concept which

  17. Technological Fantasies of Nao

    DEFF Research Database (Denmark)

    Hasse Jørgensen, Stina; Tafdrup, Oliver Alexander

    2017-01-01

    This article will through a ‘what-if’ scenario involving the humanoid robot, Nao, as a museum guide, discuss the potential benefits of theorizing social robots through a perspective grounded in critical design and postphenomenology. Within Science and Technology-studies (STS) postphenomenology has...... been the ‘go-to’ theory when discussing the philosophical aspects of human-technology relations. Postphenomenology directly addresses how humans on a phenomenological level relate to robots through an ‘alterity-relation’ that establishes the robot as a ‘quasi-other’. A methodological discussion of how...... to conduct empirical postphenomenological research into robotics, has, however, not been thoroughly unfolded, although the question of a general postphenomenological methodology has been touched upon. This article provides a contribution to the debate on how to enquire into human-robot relations...

  18. Study on Modeling Technology in Digital Reactor System

    Institute of Scientific and Technical Information of China (English)

    刘晓平; 罗月童; 童莉莉

    2004-01-01

    Modeling is the kernel part of a digital reactor system. As an extensible platform for reactor conceptual design, it is very important to study modeling technology and develop some kind of tools to speed up preparation of all classical computing models. This paper introduces the background of the project and basic conception of digital reactor. MCAM is taken as an example for modeling and its related technologies used are given. It is an interface program for MCNP geometry model developed by FDS team (ASIPP & HUT), and designed to run on windows system. MCAM aims at utilizing CAD technology to facilitate creation of MCNP geometry model. There have been two ways for MCAM to utilize CAD technology:(1) Making use of user interface technology in aid of generation of MCNP geometry model;(2) Making use of existing 3D CAD model to accelerate creation of MCNP geometry model. This paper gives an overview of MCAM's major function. At last, several examples are given to demonstrate MCAM's various capabilities.

  19. Integrating Science and Technology: Using Technological Pedagogical Content Knowledge as a Framework to Study the Practices of Science Teachers

    Science.gov (United States)

    Pringle, Rose M.; Dawson, Kara; Ritzhaupt, Albert D.

    2015-01-01

    In this study, we examined how teachers involved in a yearlong technology integration initiative planned to enact technological, pedagogical, and content practices in science lessons. These science teachers, engaged in an initiative to integrate educational technology in inquiry-based science lessons, provided a total of 525 lesson plans for this…

  20. Feasibility Study of Integrating IDELIX’s Pliable Display Technology into the COPlanS Technology Demonstration Software

    Science.gov (United States)

    2005-03-31

    Feasibility Study of Integrating IDELIX’s Pliable Display Technology into the COPlanS Technology Demonstration Software Issue Number: Version 1... Technology Demonstration Software 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f...Collaborative Operations Planning System (COPlanS) technology demonstration software in the areas of collaboration and data visualization using IDELIX’s Pliable

  1. STS-112 Crew Interviews: Ashby

    Science.gov (United States)

    2002-01-01

    STS-112 Mission Commander Jeffrey Ashby is seen during this preflight interview, answering questions about his inspiration in becoming an astronaut and his career path and provides an overview of the mission. Ashby outlines his role in the mission in general, and specifically during the docking and extravehicular activities (EVAs). He describes the payload (S1 truss) and the importance that the S1 truss will have in the development of the International Space Station (ISS). Ashby discusses the delivery and installation of the S1 truss scheduled to be done in the planned EVAs in some detail. He touches on the use and operation of the Canadarm 2 robotic arm in this process and outlines what supplies will be exchanged with the resident crew of the ISS during transfer activities. He ends with his thoughts on the value of the ISS in fostering international cooperation.

  2. STS-112 Crew Interviews - Magnus

    Science.gov (United States)

    2002-01-01

    STS-112 Mission Specialist 2 Sandra H. Magnus is seen during a prelaunch interview. She answers questions about her inspiration to become an astronaut and her career path. She gives details on the mission's goals, the most significant of which will be the installation of the S-1 truss structure on the International Space Station (ISS). The installation, one in a series of truss extending missions, will be complicated and will require the use of the robotic arm as well as extravehicular activity (EVA) by astronauts. Magnus also describes her function in the performance of transfer operations. Brief descriptions are given of experiments on board the ISS as well as on board the Shuttle.

  3. STS-112 Crew Interviews: Yurchikhin

    Science.gov (United States)

    2002-01-01

    A preflight interview with mission specialist Fyodor Yurchikhin is presented. He worked for a long time in Energia in the Russian Mission Control Center (MCC). Yurchikhin discusses the main goal of the STS-112 flight, which is to install the Integrated Truss Assembly S1 (Starboard Side Thermal Radiator Truss) on the International Space Station. He also talks about the three space walks required to install the S1. After the installation of S1, work with the bolts and cameras are performed. Yurchikhin is involved in working with nitrogen and ammonia jumpers. He expresses the complexity of his work, but says that he and the other crew members are ready for the challenge.

  4. Simulation studies for the evaluation of health information technologies

    DEFF Research Database (Denmark)

    Ammenwerth, Elske; Hackl, Werner; Binzer, Kristine

    2012-01-01

    It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management...... and lessons learnt while conducting the study. Although the new electronic medication management system showed tendencies to improve medication safety when compared with the standard system, this tendency was not significant. Altogether, five distinct situations were identified where the new medication...

  5. Simulation Studies for the evaluation of health information technologies:

    DEFF Research Database (Denmark)

    Ammenwerth, Elske; Hackl, Werner O; Binzer, Kristine

    2012-01-01

    It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management...... and lessons learnt while conducting the study. Although the new electronic medication management system showed tendencies to improve medication safety when compared with the standard system, this tendency was not significant. Altogether, fi ve distinct situations were identifi ed where the new medication...

  6. Methods of synthesizing qualitative research studies for health technology assessment.

    Science.gov (United States)

    Ring, Nicola; Jepson, Ruth; Ritchie, Karen

    2011-10-01

    Synthesizing qualitative research is an important means of ensuring the needs, preferences, and experiences of patients are taken into account by service providers and policy makers, but the range of methods available can appear confusing. This study presents the methods for synthesizing qualitative research most used in health research to-date and, specifically those with a potential role in health technology assessment. To identify reviews conducted using the eight main methods for synthesizing qualitative studies, nine electronic databases were searched using key terms including meta-ethnography and synthesis. A summary table groups the identified reviews by their use of the eight methods, highlighting the methods used most generally and specifically in relation to health technology assessment topics. Although there is debate about how best to identify and quality appraise qualitative research for synthesis, 107 reviews were identified using one of the eight main methods. Four methods (meta-ethnography, meta-study, meta-summary, and thematic synthesis) have been most widely used and have a role within health technology assessment. Meta-ethnography is the leading method for synthesizing qualitative health research. Thematic synthesis is also useful for integrating qualitative and quantitative findings. Four other methods (critical interpretive synthesis, grounded theory synthesis, meta-interpretation, and cross-case analysis) have been under-used in health research and their potential in health technology assessments is currently under-developed. Synthesizing individual qualitative studies has becoming increasingly common in recent years. Although this is still an emerging research discipline such an approach is one means of promoting the patient-centeredness of health technology assessments.

  7. Using Internet Technologies in Legal Practices and Studies in Russia

    Directory of Open Access Journals (Sweden)

    V.A. Vernigorova

    2011-05-01

    Full Text Available This paper is devoted to the agenda of using computer and Internet technologies in legal practices and studies in Russia. Despite the obvious necessity for professionals to learn English, many graduates in Russia still demonstrate a very poor command of this universal language. And it has become quite impossible for a lawyer (or for any other specialist to work effectively without using the Internet and for a student – to study and to practice a foreign language.

  8. STS-93 Pilot Ashby signs autographs after mission presentation

    Science.gov (United States)

    1999-01-01

    STS-93 Pilot Jeffrey S. Ashby signs autographs after a mission presentation for KSC employees. The five-day mission primarily released the Chandra X-ray Observatory, allowing scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. Chandra is expected to provide unique and crucial information on the nature of objects ranging from comets in our solar system to quasars at the edge of the observable universe. Since X-rays are absorbed by the Earth's atmosphere, space-based observatories are necessary to study these phenomena and allow scientists to analyze some of the greatest mysteries of the universe. STS-93 was also the first mission to have a woman, Eileen M. Collins, serving as Shuttle commander.

  9. Materialist Perspectives on Digital Technologies: Informing Debates on Digital Literacy and Competence

    OpenAIRE

    2016-01-01

    Publisher's version, source: http://doi.org/10.1515/nor-2016-0006. The present article brings critical media research and science and technology studies (STS) into dialogue with approaches to digital literacy and digital competencies in educational contexts. In particular, it focuses on material aspects of new information and communication technologies (ICTs) such as technical infrastructure, economic conditions, ecological consequences, and code-based as well as embodied forms of impact, ...

  10. [Studies on purgative activity of rhubarb extracts by different technologies].

    Science.gov (United States)

    Zheng, Zhihua; Zhu, Chenchen; Gui, Shuhua; Lin, Chaozhan

    2002-08-01

    To study on purgative activity of rhubarb extracts by solvent extraction, SFE-CO2 and SFE-CO2 & residue resin purification. The effects of the extracts by the three technologies on creepage of mouse small intestine and rat large intestine were studied by injecting charcoal ink into the intestines. And the volume of the mouse small intestine was observed. The effects of the extracts were also studied on water absorption of mouse small intestine and large intestine by weighing the intestines. The purgative activity of the extracts by the three technologies was SFE-CO2 & residue resin purification > solvent extraction > SFE-CO2. Extracting different polar components separately might get a good result.

  11. PUMA promotes Bax translocation in FOXO3a-dependent pathway during STS-induced apoptosis

    Science.gov (United States)

    Zhang, Yingjie; Chen, Qun

    2009-08-01

    PUMA (p53 up-regulated modulator of apoptosis, also called Bbc3) was first identified as a BH3-only Bcl-2 family protein that is transcriptionally up-regulated by p53 and activated upon p53-dependent apoptotic stimuli, such as treatment with DNA-damaging drugs or UV irradiation. Recently studies have been shown that Puma is also up-regulated in response to certain p53-independent apoptotic stimuli, such as growth factor deprivation or treatment with glucocorticoids or STS (staurosporine). However, the molecular mechanisms of PUMA up-regulation and how PUMA functions in response to p53-independent apoptotic stimuli remain poorly understood. In this study, based on real-time single cell analysis, flow cytometry and western blotting technique, we investigated the function of PUMA in living human lung adenocarcinoma cells (ASTC-a-1) after STS treatment. Our results show that FOXO3a was activated by STS stimulation and then translocated from cytosol to nucleus. The expression of PUMA was up-regulated via a FOXO3a-dependent manner after STS treatment, while p53 had little function in this process. Moreover, cell apoptosis and Bax translocation induced by STS were not blocked by Pifithrin-α (p53 inhibitor), which suggested that p53 was not involved in this signaling pathway. Taken together, these results indicate that PUMA promoted Bax translocation in a FOXO3a-dependment pathway during STS-induced apoptosis, while p53 was dispensable in this process.

  12. STUDY ON A HIGH PERFORMANCE INTEGRATED BEEKEEPING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    A POPESCU

    2003-10-01

    Full Text Available This study aimed to make an economic evaluation of a high performance modern beekeeping technology leading to an increased bee family capacity. The new technology removes the disadvantages of the traditional one utilising just natural picking based on Robinia, Lime, sunflower and wild flora, most of times deeply affected by unfavourable climate conditions (drought, rainfalls and conducting to important bee losses during the winter season and mainly during the critical period till the next picking. The modern technology assures 75 % more bees per family, an increased queen laying capacity by 33 %,, a 50 % reduction of bee loss in winter season, by 20 % more honey , by 50 % more propolis, by 33 % more pollen, by 50 % more swarms, by 60 % more royal jelly and by 50 % more bee venom. The modern technology is based on a scientific feeding management applying a stimulating, completing and proteinic feeding (pollen cake and/or pollen substitutes such as: degreased powder milk 30 % and soya bean cake, involving peculiar costs ranking between USD 9.73-10.06 per family/year. The total bee rearing costs have been estimated at USD 17.83 in average per family/year, of which: 55.5 % feeding costs, 6.8 % queen replacement cost, 3.2 % treatments cost, 13.5 % costs for supplying new frames and combs,17.4 % transportation costs for moving of bee families and the remaining of 3.6 % labour costs. Taking into account a standard apiary (100 bee families of an increased power, a beekeeper can obtain an USD 12,100.4 annual income, by 55.9 % higher than in case of the traditional beekeeping technology. As a conclusion, the new technology assures a higher biological and economical efficiency, USD 3,350 profit gain that is a profit by 48 % higher than in case of the classic technology. For this reason, we recommend this modern technology to be implemented by beekeepers if they would like to transform their apiaries into high performance commercial farms.

  13. STS-97 Pilot Bloomfield DEPARTs for Houston

    Science.gov (United States)

    2000-01-01

    After a night's rest and a brief press conference at KSC, STS-97 Pilot Michael Bloomfield heads for the plane at the Shuttle Landing Facility. With him are his wife (right) and daughter (left). They and other crew members and their families are returning to Houston. Mission STS-97 ended on Dec. 11, 2000, with a landing at KSC at 6:04 p.m. EST.

  14. Politicizing science: conceptions of politics in science and technology studies.

    Science.gov (United States)

    Brown, Mark B

    2015-02-01

    This essay examines five ideal-typical conceptions of politics in science and technology studies. Rather than evaluating these conceptions with reference to a single standard, the essay shows how different conceptions of politics serve distinct purposes: normative critique, two approaches to empirical description, and two views of democracy. I discuss each conception of politics with respect to how well it fulfills its apparent primary purpose, as well as its implications for the purpose of studying a key issue in contemporary democratic societies: the politicization of science. In this respect, the essay goes beyond classifying different conceptions of politics and also recommends the fifth conception as especially conducive to understanding and shaping the processes whereby science becomes a site or object of political activity. The essay also employs several analytical distinctions to help clarify the differences among conceptions of politics: between science as 'political' (adjective) and science as a site of 'politics' (noun), between spatial-conceptions and activity-conceptions of politics, between latent conflicts and actual conflicts, and between politics and power. The essay also makes the methodological argument that the politics of science and technology is best studied with concepts and methods that facilitate dialogue between actors and analysts. The main goal, however, is not to defend a particular view of politics, but to promote conversation on the conceptions of politics that animate research in social studies of science and technology.

  15. Technology Evaluation Report 17. Videoconferencing in Theatre and Performance Studies

    Directory of Open Access Journals (Sweden)

    Mark Childs

    2003-04-01

    Full Text Available Previous reports in this series have indicated the growing acceptance of video-conferencing in education delivery. The current report compares a series of video-conferencing methods in an activity requiring precision of expression and communication: theatre and performance studies. The Accessing and Networking with National and International Expertise (ANNIE project is a two-year project undertaken jointly by the University of Warwick and the University of Kent at Canterbury, running from March 2001 to March 2003. The project's aim is to enhance students' learning experience in theatre studies by enabling access to research-based teaching and to workshops led by practitioners of national and international standing. Various technologies have been used, particularly ISDN video-conferencing, computer-mediated conferencing, and the Internet. This report concludes that video-conferencing methods will gain acceptance in education, as academic schools themselves are able to operate commonly available technology the assistance of specialised service units.

  16. Study and Implementation of MUX Based FPGA in QCA Technology

    Directory of Open Access Journals (Sweden)

    E.N.Ganesh

    2011-06-01

    Full Text Available This paper presents a simple Multiplexer based Field programmable gate arrays with interconnectsbased on quantum cellular automata technology. Quantum cellular automata (QCA technology is apromising nanotechnology of the future. QCA based 4:1 Multiplexer are designed and constructed as amodule in a FPGA. Multiplexer based designs are used to implement complex Boolean functions andeach module can act as a logic element or simple Multiplexer. We have studied here, NOR based logic toimplement Sum function of an adder in a QCA FPGA. Finally we have designed and simulated the MUXbased logic elements to construct QCA FPGA. This study can be useful for building complexConfigurable logic blocks to design a complete FPGA.

  17. Study of Smart Campus Development Using Internet of Things Technology

    Science.gov (United States)

    Widya Sari, Marti; Wahyu Ciptadi, Prahenusa; Hafid Hardyanto, R.

    2017-04-01

    This paper describes the development of smart campus using Internet of Things (IoT) technology. Through smart campus, it is possible that a campus is connected via online by the outside entity, so that the teaching approach based on technology can be conducted in real time. This research was conducted in smart education, smart parking and smart room. Observation and literature studies were applied as the research method with the related theme for the sake of system design of smart campus. The result of this research is the design of smart campus system that includes smart education development, smart parking and smart room with the sake of Universitas PGRI Yogyakarta as the case study.

  18. Virtual reconstruction of the Australopithecus africanus pelvis Sts 65 with implications for obstetrics and locomotion.

    Science.gov (United States)

    Claxton, Alexander G; Hammond, Ashley S; Romano, Julia; Oleinik, Ekaterina; DeSilva, Jeremy M

    2016-10-01

    Characterizing australopith pelvic morphology has been difficult in part because of limited fossilized pelvic material. Here, we reassess the morphology of an under-studied adult right ilium and pubis (Sts 65) from Member 4 of Sterkfontein, South Africa, and provide a hypothetical digital reconstruction of its overall pelvic morphology. The small size of the pelvis, presence of a preauricular sulcus, and shape of the sciatic notch allow us to agree with past interpretations that Sts 65 likely belonged to a female. The morphology of the iliac pillar, while not as substantial as in Homo, is more robust than in A.L. 288-1 and Sts 14. We created a reconstruction of the pelvis by digitally articulating the Sts 65 right ilium and a mirrored copy of the left ilium with the Sts 14 sacrum in Autodesk Maya. Points along the arcuate line were used to orient the ilia to the sacrum. This reconstruction of the Sts 65 pelvis looks much like a "classic" australopith pelvis, with laterally flared ilia and an inferiorly deflected pubis. An analysis of the obstetric dimensions from our reconstruction shows similarity to other australopiths, a likely transverse or oblique entrance of the neonatal cranium into the pelvic inlet, and a cephalopelvic ratio similar to that found in humans today.

  19. Study on Bamboo Treatment Technology with CuAz Preservative

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In order to research the effect of preservative penetrability, CuAz (copper azole) was used for the preservative, and pieces of Moso bamboo (Phyllostachys pubescens) were used for the experimental materials in this study. The vacuum pressure process was used to treat bamboo pieces. The results showed as follows: 1) Main treatment factors were preservative concentration and applied pressure; 2) In the same technology, both the retention and the weight proportion gain of the samples without node were less tha...

  20. Studies on Logistics and Logistics Technology of China

    Institute of Scientific and Technical Information of China (English)

    LuoYixin

    2005-01-01

    For further pushing ahead with the development of China's logistics industry, the author, based on the status quo of China's logistics industry, affirms the achievements made in the development course of the industry of China. By studying various respects of the industry including the understanding of logistics, standards of technical terms, logistics technologies and management, the author analyzes the major problems existence in China's current logistics industry and puts forward the rationalization proposal.

  1. Feasibility study on the development of advanced LWR fuel technology

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Youn Ho; Sohn, D. S.; Jeong, Y. H.; Song, K. W.; Song, K. N.; Chun, T. H.; Bang, J. G.; Bae, K. K.; Kim, D. H. and others

    1997-07-01

    Worldwide R and D trends related to core technology of LWR fuels and status of patents have been surveyed for the feasibility study. In addition, various fuel cycle schemes have been studied to establish the target performance parameters. For the development of cladding material, establishment of long-term research plan for alloy development and optimization of melting process and manufacturing technology were conducted. A work which could characterize the effect of sintering additives on the microstructure of UO{sub 2} pellet has been experimentally undertaken, and major sintering variables and their ranges have been found in the sintering process of UO{sub 2}-Gd{sub 2}O{sub 3} burnable absorber pellet. The analysis of state of the art technology related to flow mixing device for spacer grid and debris filtering device for bottom nozzle and the investigation of the physical phenomena related to CHF enhancement and the establishment of the data base for thermal-hydraulic performance tests has been done in this study. In addition, survey on the documents of the up-to-date PWR fuel assemblies developed by foreign vendors have been carried out to understand their R and D trends and establish the direction of R and D for these structural components. And, to set the performance target of the new fuel, to be developed, fuel burnup and economy under the extended fuel cycle length scheme were estimated. A preliminary study on the failure mechanism of CANDU fuel, key technology and advanced coating has been performed. (author). 190 refs., 31 tabs., 129 figs.

  2. Role-play and the Industrial Revolution: an STS approach to the teaching of steam engines

    Science.gov (United States)

    Sabka, Diego; Pereira de Pereira, Alexsandro; Lima Junior, Paulo

    2016-11-01

    Role-play is an interesting, although underexplored, way of teaching physics in high school. This paper presents a science-technology-society (STS) approach to the teaching of heat engines based on a role-play of the Industrial Revolution. Enacting the role-play, students are presented not only to scientific concepts, but also to the social and technological controversies of industrial development.

  3. HELIAS stellarator reactor studies and related European technology studies

    Energy Technology Data Exchange (ETDEWEB)

    Grieger, G. (Max-Planck-Institut fuer Plasmaphysik, EURATOM-Association, D-85748 Garching (Germany)); Nuehrenberg, J. (Max-Planck-Institut fuer Plasmaphysik, EURATOM-Association, D-85748 Garching (Germany)); Renner, H. (Max-Planck-Institut fuer Plasmaphysik, EURATOM-Association, D-85748 Garching (Germany)); Sapper, J. (Max-Planck-Institut fuer Plasmaphysik, EURATOM-Association, D-85748 Garching (Germany)); Wobig, H. (Max-Planck-Institut fuer Plasmaphysik, EURATOM-Association, D-85748 Garching (Germany))

    1994-08-01

    Research on stellarators has been carried out in Europe since the early years of the fusion programme. Early studies of this reactor concept were done at the Culham Laboratory of the UK Atomic Energy Authority. Such classical stellarators, however, have poor reactor prospects in spite of the significant advantage of not needing a large toroidal plasma current. It seemed to be just this large toroidal plasma current which has led to intrinsic deficiencies with respect to reactor potential of the tokamak. Expecting that these deficiencies would disappear for a concept without such a current, the Institut fuer Plasmaphysik developed, in a roll-back fashion, i.e. by starting from reactor considerations, the concept of the helical axis advanced stellarator (HELIAS). The results achieved look very promising indeed. Since tokamaks and stellarators show many similarities, there appeared no need as yet for a new stand-alone stellarator reactor study. The work was rather concentrated on the few but decisive differences between the two concepts and on evaluation of their relative importance. Studies on the coil system, the stress distribution in the supporting material, the space needed for an efficient blanket system, the properties of the exhaust system, etc. have been done. Applying contemporary scaling laws, it turns out that although the aspect ratio of such advanced stellarators is larger than that of tokamaks, the plasma volume is about the same. The magnetic energy needed for plasma confinement is considerably lower and the mass utilization tends to be larger than for comparable tokamaks. It also follows that a number of reactor components needed for tokamak operation (e.g. current drive, feedback stabilization, disruption prevention) are not needed in stellarators, making this type of reactor and its operation simpler. Such results would have a large influence on selection of the final concept and the further evolution of the fusion programme.

  4. Usage Concepts of Augmented Reality Technology in Islamic Study

    Directory of Open Access Journals (Sweden)

    Norabeerah Saforrudin

    2012-06-01

    Full Text Available The augmented reality (AR has been identified to be suitable for use in education. However, studies that particularly identify this concept are still rare. Therefore, this qualitative study was conducted with objectives to determine the perception of teacher educators from the Islamic Study Department, Teacher Training Institute in Central Zone of Malaysia towards AR, and to develop a usage concept that can be implemented when teaching and learning Islamic Study. Explorative case study method involving three teacher educators was used. They were interviewed by using an in-depth semi-structured interview schedule. From the interview, all responses provided by the informants are very positive and admitted that AR technology is suitable to be used in the Islamic Study. The usage concepts discussed in this paper can be used as guidelines to those who are interested in developing or using the AR application based on Islamic Study topics.

  5. Study of capabilities and limitations of 3D printing technology

    Science.gov (United States)

    Lemu, H. G.

    2012-04-01

    3D printing is one of the developments in rapid prototyping technology. The inception and development of the technology has highly assisted the product development phase of product design and manufacturing. The technology is particularly important in educating product design and 3D modeling because it helps students to visualize their design idea, to enhance their creative design process and enables them to touch and feel the result of their innovative work. The availability of many 3D printers on the market has created a certain level of challenge for the user. Among others, complexity of part geometry, material type, compatibility with 3D CAD models and other technical aspects still need in-depth study. This paper presents results of the experimental work on the capabilities and limitations of the Z510 3D printer from Z-corporation. Several parameters such as dimensional and geometrical accuracy, surface quality and strength as a function of model size, orientation and file exchange format are closely studied.

  6. Technological issues and experimental design of gene association studies.

    Science.gov (United States)

    Distefano, Johanna K; Taverna, Darin M

    2011-01-01

    Genome-wide association studies (GWAS), in which thousands of single-nucleotide polymorphisms (SNPs) spanning the genome are genotyped in individuals who are phenotypically well characterized, -currently represent the most popular strategy for identifying gene regions associated with common -diseases and related quantitative traits. Improvements in technology and throughput capability, development of powerful statistical tools, and more widespread acceptance of pooling-based genotyping approaches have led to greater utilization of GWAS in human genetics research. However, important considerations for optimal experimental design, including selection of the most appropriate genotyping platform, can enhance the utility of the approach even further. This chapter reviews experimental and technological issues that may affect the success of GWAS findings and proposes strategies for developing the most comprehensive, logical, and cost-effective approaches for genotyping given the population of interest.

  7. The Institute for Security Technology Studies (ISTS): overview

    Science.gov (United States)

    Kotz, David F.

    2004-09-01

    The Institute for Security Technology Studies (ISTS) was founded at Dartmouth College in 2000 as a national center of security research and development. The Institute conducts interdisciplinary research and development projects addressing the challenges of cyber and homeland security, to protect the integrity of the Internet, computer networks, and other interdependent information infrastructures. ISTS also develops technology for providing the information and tools necessary to assist communities and first responders with the evolving, complex security landscape. ISTS is a member of and administers the Institute for Information Infrastructure Protection (I3P), a consortium of 24 leading academic institutions, non-profits and federal laboratories that brings industry, academia and government together to articulate and focus on problems that need to be solved to help ensure the nation's information infrastructure is safe, secure, and robust.

  8. Managing knowledge: a technology transfer case study in IEN

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Ana Gabriella Amorim Abreu [Instituto de Engenharia Nuclear (IEN), Rio de Janeiro, RJ (Brazil). Servico de Transferencia de Tecnologia], e-mail: agaap@ien.gov.br

    2009-07-01

    Knowledge management is paramount nowadays. In order to enable the members of an organization to deal with their current situations effectively it is mandatory to know and enhance its intellectual capital. Managing the organization knowledge is important to the extent that it allows and reinforce its mission (what we are trying to accomplish?), and performance (how do we deliver the results?). As a result of a knowledge management effort, the organization can create value for itself and for society as a whole. In this paper, we argue that a technology developed at a research institute and transferred to an industry is knowledge to be managed in order to create value, both for the society and for the Institute. In order to manage such knowledge, it is proposed an approach to enhance the value creation potential of a technology transfer. This paper propose an investigation to expand the understanding on how a public research institute and a private firm could introduce their value creation wishes into a technology transfer agreement in a way to reflect and provide the realization of those wishes. It is proposed that, from the identification of the organizations expectations it is possible to infer which agreement attributes will contribute to that value creation and to establish satisfactory agreement configurations. These configurations have the potential to generate those consequences, given that, through the transfer, each organization seeks to increase potential benefits and to reduce potential sacrifices. Supported by exchange flow and value creation models, by the knowledge management and the means-end theory, an approach to increase the value creation potential of a technology transfer is proposed. Evidences from a case study sustain the proposed approach. The case study unity is the Instituto de Engenharia Nuclear, a public research institute. (author)

  9. "Disruptive Technologies", "Pedagogical Innovation": What's New? Findings from an In-Depth Study of Students' Use and Perception of Technology

    Science.gov (United States)

    Conole, Grainne; de Laat, Maarten; Dillon, Teresa; Darby, Jonathan

    2008-01-01

    The paper describes the findings from a study of students' use and experience of technologies. A series of in-depth case studies were carried out across four subject disciplines, with data collected via survey, audio logs and interviews. The findings suggest that students are immersed in a rich, technology-enhanced learning environment and that…

  10. "Disruptive Technologies", "Pedagogical Innovation": What's New? Findings from an In-Depth Study of Students' Use and Perception of Technology

    Science.gov (United States)

    Conole, Grainne; de Laat, Maarten; Dillon, Teresa; Darby, Jonathan

    2008-01-01

    The paper describes the findings from a study of students' use and experience of technologies. A series of in-depth case studies were carried out across four subject disciplines, with data collected via survey, audio logs and interviews. The findings suggest that students are immersed in a rich, technology-enhanced learning environment and that…

  11. Structural and electronic properties of ultrathin FeSe films grown on Bi2Se3(0 0 0 1) studied by STM/STS

    Science.gov (United States)

    Singh, Udai Raj; Warmuth, Jonas; Markmann, Verena; Wiebe, Jens; Wiesendanger, Roland

    2017-01-01

    We report scanning tunnelling microscopy and spectroscopy (STM/STS) studies on one and two unit cell (UC) high FeSe thin films grown on Bi2Se3(0 0 0 1). In our thin films, we find the tetragonal phase of FeSe and dumb-bell shaped defects oriented along Se-Se bond directions. In addition, we observe striped moiré patterns with a periodicity of (7.3  ±  0.1) nm generated by the mismatch between the FeSe lattice and the Bi2Se3 lattice. We could not find any signature of a superconducting gap in the tunneling spectra measured on the surface of one and two UC thick islands of FeSe down to 6.5 K. The spectra rather show an asymmetric behavior across and a finite density of states at the Fermi level (E F) resembling those taken in the normal state of bulk FeSe.

  12. STS-90 Day 14 Highlights

    Science.gov (United States)

    1998-01-01

    On this fourteenth day of the STS-90 mission, the flight crew, Cmdr. Richard A. Searfoss, Pilot Scott D. Altman, and Mission Specialists Richard M. Linnehan, Dafydd Rhys Williams and Kathryn P. Hire, and Payload Specialists Jay C. Buckey and James A. Pawelczyk focus on the efforts of Neurolab's Neuronal Plasticity Team to better understand how the adult nervous system adapts to the new environment of space. Columbia's science crew -- Mission Specialists Rick Linnehan and Dave Williams and Payload Specialists Jay Buckey and Jim Pawelczyk -- perform the second and final in-flight dissections of the adult male rats on board. The crew euthanizes and dissects nine rats and remove the vestibular or balance organs of the inner ear; the cerebellum, the part of the brain critical for maintaining balance and for processing information from the limbs so they can be moved smoothly; and the cerebrum, one part of which controls automatic functions such as body temperature regulation and the body's internal clock, and the cortical region that controls cognitive functions such as thinking. The first dissection, which was performed on the second day of the flight, went extremely well, according to Neurolab scientists.

  13. STS-90 Day 04 Highlights

    Science.gov (United States)

    1998-01-01

    On this forth day of the STS-90 mission, the flight crew, Cmdr. Richard A. Searfoss, Pilot Scott D. Altman, and Mission Specialists Richard M. Linnehan, Dafydd Rhys Williams and Kathryn P. Hire, and Payload Specialists Jay C. Buckey and James A. Pawelczyk continue work with the Escher Staircase Behavior Testing of Adult Rats experiment. This is the first of two behavior testing sessions with the adult rats being used for this experiment. The rats will have a 'hyper drive' unit placed on their head which has recording electrodes made of microscopic wires that are positioned in the brain to record activity in the hippocampus. The hippocampus is that portion of the brain used to develop spatial maps to help us navigate from one place to the other. With the 'hyper drive' units in place, the rats will then be put through a maze or on a track. While the rat is maneuvering on the maze or track, the cell activity of the hippocampus will be measured and recorded.

  14. STS-70 Post Flight Presentation

    Science.gov (United States)

    Peterson, Glen (Editor)

    1995-01-01

    In this post-flight overview, the flight crew of the STS-70 mission, Tom Henricks (Cmdr.), Kevin Kregel (Pilot), Major Nancy Currie (MS), Dr. Mary Ellen Weber (MS), and Dr. Don Thomas (MS), discuss their mission and accompanying experiments. Pre-flight, launch, and orbital footage is followed by the in-orbit deployment of the Tracking and Data Relay Satellite (TDRS) and a discussion of the following spaceborne experiments: a microgravity bioreactor experiment to grow 3D body-like tissue; pregnant rat muscular changes in microgravity; embryonic development in microgravity; Shuttle Amateur Radio Experiment (SAREX); terrain surface imagery using the HERCULES camera; and a range of other physiological tests, including an eye and vision test. Views of Earth include: tropical storm Chantal; the Nile River and Red Sea; lightning over Brazil. A three planet view (Earth, Mars, and Venus) was taken right before sunrise. The end footage shows shuttle pre-landing checkout, entry, and landing, along with a slide presentation of the flight.

  15. STS-112 Crew Interviews: Sellers

    Science.gov (United States)

    2002-01-01

    Piers Sellers is an Astronaut from Crowborough, UK. His Bachelor of Science degree is in Ecological science from Scotland's University of Edinburgh and his doctorate is in biometeorology from Leeds University in the UK. After two years of intense training, Sellers's first assignment as a Mission Specialist is on Flight 111 STS-112. The goal of this flight is to continue building the International Space Station. Sellers, accompanied by five astronauts, will install the S1 truss of the space station which will take three EVA's, or Extra Vehicular Activities to complete. In EVA 1, the highest priority, the S1 truss will be attached to the space station. EVA 2, the electrical work, will set up the radiator and cooling equipment for the station. EVA 3, the final process of the flight, will prepare the station for the next mission. The primary reason for installing the truss is to change the center of gravity of the station so when the next truss is installed, it will be at a symmetrical point.

  16. Technology, Citizenship, and the Social Studies Classroom: Education for Democracy in a Technological Age

    Science.gov (United States)

    Crowe, Alicia R.

    2006-01-01

    Throughout human existence, changes in technology have influenced human life. Innovations in technology also impact civic life. Radio and television became prominent fixtures in the United States in the twentieth century. In entering the twenty-first century, another technological innovation, the Internet, emerged as a new factor in civic life.…

  17. Accepting Technology as a Solution: A Quantitative Study Investigating the Adoption of Technology at Colleges

    Science.gov (United States)

    Demuth, Leroy G., III.

    2010-01-01

    Adopting a new technology is an important decision for many academic institutions. Colleges have had to upgrade technology or face diminishing enrollment as students choose to attend other, more responsive institutions. New and imaginative approaches to technology have been developed and implemented by faculty, support staff, and students to…

  18. STS-93 Pilot Ashby suits up before launch

    Science.gov (United States)

    1999-01-01

    In the Operations and Checkout Building during final launch preparations for the second time, STS-93 Pilot Jeffrey S. Ashby waves after donning his launch and entry suit while a suit tech adjusts his boot. After Space Shuttle Columbia's July 20 launch attempt was scrubbed at the T-7 second mark in the countdown, the launch was rescheduled for Thursday, July 22, at 12:28 a.m. EDT. The target landing date is July 26, 1999, at 11:24 p.m. EDT. STS- 93 is a five-day mission primarily to release the Chandra X-ray Observatory, which will allow scientists from around the world to study some of the most distant, powerful and dynamic objects in the universe. The new telescope is 20 to 50 times more sensitive than any previous X-ray telescope and is expected unlock the secrets of supernovae, quasars and black holes. The STS-93 crew numbers five: Commander Eileen M. Collins, Ashby, and Mission Specialists Stephen A. Hawley (Ph.D.), Catherine G. Coleman (Ph.D.) and Michel Tognini of France, with the Centre National d'Etudes Spatiales (CNES). Collins is the first woman to serve as commander of a shuttle mission.

  19. Technology sourcing over the technology life cycle: A study about the moderating effect of the technology life cycle on the relation between technology sourcing and firm performance

    NARCIS (Netherlands)

    Stolwijk, C.C.M.

    2012-01-01

    How do external and internal technology sourcing influence the innovative and market performance of firms over the technology life-cycle? The impact of technology sourcing on firm performance during different phases of the technology life cycle represents a gap in academic literature. Practically, i

  20. Technology sourcing over the technology life cycle: A study about the moderating effect of the technology life cycle on the relation between technology sourcing and firm performance

    NARCIS (Netherlands)

    Stolwijk, C.C.M.

    2012-01-01

    How do external and internal technology sourcing influence the innovative and market performance of firms over the technology life-cycle? The impact of technology sourcing on firm performance during different phases of the technology life cycle represents a gap in academic literature. Practically,

  1. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  2. Gender in health technology assessment: pilot study on agency approaches.

    Science.gov (United States)

    Panteli, Dimitra; Zentner, Annette; Storz-Pfennig, Philipp; Busse, Reinhard

    2011-07-01

    Gender as a social construct is a recognized health determinant. Because best practice in reporting health technology assessment (HTA) clearly specifies the need to appraise a technology's social impact within the target population, the extent to which gender issues are taken into account in HTA production is of interest, not only in light of equitable practices but also for reasons of effectiveness. The aim of this study is to provide a first assessment of the degree of gender sensitivity shown by HTA agencies around the world today. The Web sites of sixty HTA agencies were analyzed. The consideration of gender aspects was specifically looked for in each agency's general mission statement, its priority setting process, and its methodological approach. Additionally, specific gender-oriented initiatives not belonging to any of the aforementioned categories were identified. Of the sixty agencies, less than half mention a commitment to addressing the social implication of health technologies. Only fifteen institutions make information on their priority setting principles available on their Web sites and gender was an issue in two of those cases. Data on methodology were obtainable online from 18 agencies, two of which mentioned gender issues explicitly. Finally, gender-oriented initiatives were identified by thirteen agencies. A gender-sensitive approach is apparently rarely adopted in current HTA production. Exceptional practices and relevant tools do exist and could serve as examples to be promoted by international collaborative networks.

  3. Development and Implementation of Health Technology Assessment: A Policy Study

    Directory of Open Access Journals (Sweden)

    P Abooee

    2013-01-01

    Full Text Available Background: To provide an overview of the development of health technology assessment (HTA in Iran since 2007, and to facilitate further development of HTA and its integration into policy making.Methods: Data of this study were collected through key documents (e.g. literature, laws, and other official documentation and analyzed by experts of opinion in form of qualitative methods.Results: Health technology assessment entered to the political agenda in Iran only in 2007 with a strong impetus of an evidence-based medicine movement with the bellow objectives: Institutionalization of evidence-based decision making in Ministry of Health, Creating an localization for structural HTA in Health system of Iran, Setting up training courses in order to educate capable manpower to full up the capacity of the universities, Establishment of a new field in HTA subject in medical universities for MSc and PhD degree, International communication about HTA through national website and possible participation in international Congress.Conclusion: HTA has been established in the healthcare system of Iran but what is needed is a clear political will to push forward the objectives of HTA in Iran. Similar to other countries, advance the regulation on the adoption of new health technologies to improve not only technical or allocate efficiency, but also health equity.

  4. Technology as a Time Challenge: Study, Concept and Types of Technology

    Directory of Open Access Journals (Sweden)

    Vadim M. Rozin

    2017-09-01

    Full Text Available In the article divorce the concepts of engineering and technology. Designated four stages of technological development: the fi rst phase — “pilot technique”, it is characterized by magical conceptualization, the second — engineering (rational conceptualization, third design, fourth technology. For technical equipment is characterized by four features: technology is the artifacts, the technique can be considered as a “social body” of a person or society, technology is a useful way to use the forces of nature, and fi nally, the mediation in the form of tools, machines, and material environment that allows you to implement the ideas of man. It is argued that the conceptualization of technology is the essential characteristic of the concept. If you write, for example, about the technology of the Neolithic age or era of construction of the Egyptian pyramids, then we are talking about retrospective interpretation, from the point of view of modern understanding of technology. It’s not useless, for example, to determine preconditions of formation technology, but in terms of thinking creates problems and contradictions. The author argues that technology develops in the second half of the eighteenth century as a new reality, which describes the industrial activities in language operations and their conditions of division of labor and management. At the same time, technology is being characterized by the installation of quality, savings, standardization, and rational description of the production processes, their optimization for the training of new technologists. Discusses three stages of development of the technology and features of the main types of technology: production technology, engineering, large techno-social projects, global technology. Considering the author and the conditions of the development of new technologies. These include “technological zone of proximal development”, as well as two situation — relevant issues and

  5. Technology development of the Space Transportation System mission and terrestrial applications of satellite technology

    Science.gov (United States)

    1981-01-01

    The Space Transportation System (STS) is discussed, including the launch processing system, the thermal protection subsystem, meteorological research, sound supression water system, rotating service structure, improved hypergol or removal systems, fiber optics research, precision positioning, remote controlled solid rocket booster nozzle plugs, ground operations for Centaur orbital transfer vehicle, parachute drying, STS hazardous waste disposal and recycle, toxic waste technology and control concepts, fast analytical densitometry study, shuttle inventory management system, operational intercommunications system improvement, and protective garment ensemble. Terrestrial applications are also covered, including LANDSAT applications to water resources, satellite freeze forecast system, application of ground penetrating radar to soil survey, turtle tracking, evaluating computer drawn ground cover maps, sparkless load pulsar, and coupling a microcomputer and computing integrator with a gas chromatograph.

  6. A Comparative Study on Emerging Electric Vehicle Technology Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Ford, Jonathan [Sentech, Inc.; Khowailed, Gannate [Sentech, Inc.; Blackburn, Julia [Sentech, Inc.; Sikes, Karen [Sentech, Inc.

    2011-03-01

    Numerous organizations have published reports in recent years that investigate the ever changing world of electric vehicle (EV) technologies and their potential effects on society. Specifically, projections have been made on greenhouse gas (GHG) emissions associated with these vehicles and how they compare to conventional vehicles or hybrid electric vehicles (HEVs). Similar projections have been made on the volumes of oil that these vehicles can displace by consuming large amounts of grid electricity instead of petroleum-based fuels. Finally, the projected rate that these new vehicle fleets will enter the market varies significantly among organizations. New ideas, technologies, and possibilities are introduced often, and projected values are likely to be refined as industry announcements continue to be made. As a result, over time, a multitude of projections for GHG emissions, oil displacement, and market penetration associated with various EV technologies has resulted in a wide range of possible future outcomes. This leaves the reader with two key questions: (1) Why does such a collective range in projected values exist in these reports? (2) What assumptions have the greatest impact on the outcomes presented in these reports? Since it is impractical for an average reader to review and interpret all the various vehicle technology reports published to date, Sentech Inc. and the Oak Ridge National Laboratory have conducted a comparative study to make these interpretations. The primary objective of this comparative study is to present a snapshot of all major projections made on GHG emissions, oil displacement, or market penetration rates of EV technologies. From the extensive data found in relevant publications, the key assumptions that drive each report's analysis are identified and 'apples-to-apples' comparisons between all major report conclusions are attempted. The general approach that was taken in this comparative study is comprised of six primary

  7. A Comparative Study on Emerging Electric Vehicle Technology Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Ford, Jonathan [Sentech, Inc.; Khowailed, Gannate [Sentech, Inc.; Blackburn, Julia [Sentech, Inc.; Sikes, Karen [Sentech, Inc.

    2011-03-01

    Numerous organizations have published reports in recent years that investigate the ever changing world of electric vehicle (EV) technologies and their potential effects on society. Specifically, projections have been made on greenhouse gas (GHG) emissions associated with these vehicles and how they compare to conventional vehicles or hybrid electric vehicles (HEVs). Similar projections have been made on the volumes of oil that these vehicles can displace by consuming large amounts of grid electricity instead of petroleum-based fuels. Finally, the projected rate that these new vehicle fleets will enter the market varies significantly among organizations. New ideas, technologies, and possibilities are introduced often, and projected values are likely to be refined as industry announcements continue to be made. As a result, over time, a multitude of projections for GHG emissions, oil displacement, and market penetration associated with various EV technologies has resulted in a wide range of possible future outcomes. This leaves the reader with two key questions: (1) Why does such a collective range in projected values exist in these reports? (2) What assumptions have the greatest impact on the outcomes presented in these reports? Since it is impractical for an average reader to review and interpret all the various vehicle technology reports published to date, Sentech Inc. and the Oak Ridge National Laboratory have conducted a comparative study to make these interpretations. The primary objective of this comparative study is to present a snapshot of all major projections made on GHG emissions, oil displacement, or market penetration rates of EV technologies. From the extensive data found in relevant publications, the key assumptions that drive each report's analysis are identified and 'apples-to-apples' comparisons between all major report conclusions are attempted. The general approach that was taken in this comparative study is comprised of six primary

  8. A Study on Test Technology to Diagnose the Power Apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K. H.; Kang, Y. S.; Jeon, Y. K.; Lee, W. Y.; Kang, D. S.; Kyu, H. S.; Sun, J. H.; Jo, K. H. [Korea Electrotechnology Research Institute (Korea, Republic of); Jung, J. S.; Mun, Y. T.; Lee, K. H.; Jung, E. H.; Kim, J. H. [Korea Water Resources Corporation (Korea, Republic of)

    1997-02-01

    In this study, we have educated KOWACO(Korea Water Resources Corporation) specialists about the insulation diagnostic technology and trained them the insulation diagnostic test and estimation method of power apparatus. The main results of this study are as follows; A. Education of basic high-voltage engineering. B. Research of insulation characteristic and deterioration mechanism in power apparatus C. Discussion on high-voltage test standard specifications. D. Study on insulation deterioration diagnostics in power apparatus. E. Field testing of insulation diagnosis in power apparatus. F. Engineering of insulation diagnostic testing apparatus to diagnose power apparatus. KOWACO specialists are able to diagnose insulation diagnostic test of power apparatus through this study. As they have instruments to diagnose power apparatus, they can do the test and estimation of the power apparatus insulation diagnosis. (author). refs., figs., tabs.

  9. Evolving technologies support mobile and collaborative curriculum: a case study.

    Science.gov (United States)

    Le Ber, Jeanne M; Lombardo, Nancy T

    2012-01-01

    This case study describes the efforts of librarians to integrate mobile devices, collaboration tools, and resources into a School of Medicine third-year pediatric clerkship. Additional class emphasis is on evidence-based searching and journal article evaluation and presentation. The class objectives ensure that students are comfortable with mobile devices and collaboration tools. Over the eight-year history of the course, student acceptance of the mobile devices used diminished as the devices aged, necessitating the evaluation and selection of new technologies. Collaboration tools and mobile applications employed in the course evolved to accommodate curriculum changes.

  10. Studying Mobile Media Cultural Technologies, Mobile Communication, and the IPhone

    CERN Document Server

    Hjorth, Larissa; Richardson, Ingrid

    2012-01-01

    The iPhone represents an important moment in both the short history of mobile media and the long history of cultural technologies. Like the Walkman of the 1980s, it marks a juncture in which notions about identity, individualism, lifestyle and sociality require rearticulation. this book explores not only the iPhone's particular characteristics, uses and "affects," but also how the "iPhone moment" functions as a barometer for broader patterns of change. In the iPhone moment, this study considers the convergent trajectories in the evolution of digital and mobile culture, and

  11. An Evaluation of Installation Methods for STS-1 Seismometers

    Science.gov (United States)

    Holcomb, L. Gary; Hutt, Charles R.

    1992-01-01

    INTRODUCTION This report documents the results of a series of experiments conducted by the authors at the Albuquerque Seismological Laboratory (ASl) during the spring and summer of 1991; the object of these experiments was to obtain and document quantitative performance comparisons of three methods of installing STS-1 seismometers. Historically, ASL has installed STS-1 sensors by cementing their thick glass base plates to the concrete floor of the vault (see Peterson and Tilgner, 1985, p 44 and Figure 31, p 51 for the details of this installation technique). This installation technique proved to be fairly satisfactory for the China Digital Seismic Network and for several sets of STS-1 sensors installed in other locations since that time. However, the cementing operation is rather labor intensive and the concrete requires a lengthy (about 1 week) curing time during which the sensor installed on it is noisy. In addition it is difficult to assure that all air bubbles have been removed from the interface between the cement and the glass base plate. If air bubbles are present beneath the plate, horizontal sensors can be unacceptably noisy. Moving a sensor installed in this manner requires the purchase of a new glass base plate because the old plate normally can not be removed without breakage. Therefore, this study was undertaken with the aim of developing an improved method of installing STS-1's. The goals were to develop a method which requires less field site labor during the installation and assures a higher quality installation when finished. In addition, the improved installation technique should promote portability. Two alternate installation techniques were evaluated in this study. One method replaces the cement between the base plate and the vault floor with sand. This method has been used in the French Geoscope program and in several IRIS/IDA installations made by the University of California at San Diego (UCSD) and possibly others. It is easily implemented in

  12. Technology commercialization cost model and component case study

    Science.gov (United States)

    1991-12-01

    Fuel cells seem poised to emerge as a clean, efficient, and cost competitive source of fossil fuel based electric power and thermal energy. Sponsors of fuel cell technology development need to determine the validity and the attractiveness of a technology to the market in terms of meeting requirements and providing value which exceeds the total cost of ownership. Sponsors of fuel cell development have addressed this issue by requiring the developers to prepare projections of the future production cost of their fuel cells in commercial quantities. These projected costs, together with performance and life projections, provide a preliminary measure of the total value and cost of the product to the customer. Booz-Allen & Hamilton Inc. and Michael A. Cobb & Company have been retained in several assignments over the years to audit these cost projections. The audits have gone well beyond a simple review of the numbers. They have probed the underlying technical and financial assumptions, the sources of data on material and equipment costs, and explored issues such as the realistic manufacturing yields which can be expected in various processes. Based on the experience gained from these audits, DOE gave Booz-Allen and Michael A. Cobb & company the task to develop a criteria to be used in the execution of future fuel cell manufacturing cost studies. It was thought that such a criteria would make it easier to execute such studies in the future as well as to cause such studies to be more understandable and comparable.

  13. Efficiency of the Technology Acceptance Model to Explain Pre-Service Teachers' Intention to Use Technology: A Turkish Study

    Science.gov (United States)

    Teo, Timothy; Ursavas, Omer Faruk; Bahcekapili, Ekrem

    2011-01-01

    Purpose: The purpose of this study is to assess the efficiency of the technology acceptance model (TAM) to explain pre-service teachers' intention to use technology in Turkey. Design/methodology/approach: A total of 197 pre-service teachers from a Turkish university completed a survey questionnaire measuring their responses to four constructs…

  14. Effective Information Technology Governance Mechanisms: An Australian Study

    Directory of Open Access Journals (Sweden)

    Syaiful Ali

    2006-01-01

    Full Text Available Growing importance of information technology (IT, as a strategic factor for organizations in achieving their objectives, have raised the concern of organizations in establishing and implementing effective IT governance. This study seeks to empirically examine the individual IT governance mechanisms that influence the overall effectiveness of IT governance. The data were obtained by using web based survey from 176 members of ISACA (Information Systems and Audit Control Association Australia. This study examines the influences of six proposed IT governance mechanisms on the overall effectiveness of IT governance. Using Factor Analysis and Multiple Regression techniques, the current study finds significant positive relationships between the overall level of effective IT governance and the following four IT governance mechanisms: the existence of ethics/ culture of compliance in IT, corporate communication systems, an IT strategy committee, and the involvement of senior management in IT.

  15. Characterization of Volume F Trash from Four Recent STS Missions: Weights, Categorization, Water Content

    Science.gov (United States)

    Strayer, Richard F.; Hummerick, Mary E.; Richards, Jeffrey T.; McCoy, LaShelle E.; Roberts, Michael S.; Wheeler, Raymond M.

    2011-01-01

    The fate of space-generated solid wastes, including trash, for future missions is under consideration by NASA. Several potential treatment options are under consideration and active technology development. Potential fates for space-generated solid wastes are: Storage without treatment; storage after treatment(s) including volume reduction, water recovery, sterilization, and recovery plus recycling of waste materials. Recycling might be important for partial or full closure scenarios because of the prohibitive costs associated with resupply of consumable materials. For this study, we determined the composition of trash returned from four recent STS missions. The trash material was 'Volume F' trash and other trash, in large zip-lock bags, that accompanied the Volume F trash. This is the first of two submitted papers on these wastes. This one will cover trash content, weight and water content. The other will report on the microbial Characterization of this trash. STS trash was usually made available within 2 days of landing at KSC. The Volume F bag was weighed, opened and the contents were catalogued and placed into one of the following categories: food waste (and containers), drink containers, personal hygiene items - including EVA maximum absorbent garments (MAGs)and Elbow packs (daily toilet wipes, etc), paper, and packaging materials - plastic firm and duct tape. Trash generation rates for the four STS missions: Total wet trash was 0.602 plus or minus 0.089 kg(sub wet) crew(sup -1) d(sup -1) containing about 25% water at 0.154 plus or minus 0.030 kg(sub water) crew(sup -1) d(sup -1) (avg plus or minus stdev). Cataloguing by category: personal hygiene wastes accounted for 50% of the total trash and 69% of the total water for the four missions; drink items were 16% of total weight and 16% water; food wastes were 22% of total weight and 15% of the water; office waste and plastic film were 2% and 11% of the total waste and did not contain any water. The results can be

  16. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  17. Space Technology: A study of the significance of recognition for innovators of spinoff technologies. A case study on the impact of the space technology hall of fame award

    Science.gov (United States)

    1993-01-01

    This report represents the preliminary effort in studying the significance of recognition for innovators of spinoff technologies. The purpose of this initial year's effort in this area was to gather preliminary data and define the direction for the remainder of the research. This report focuses on the most recent recipients of the Hall of Fame Award, the developers of liquid-cooled garments. Liquid-cooled garments technology and its spinoffs were used as a case study to define and explore the factors involved in technology transfer and to consider the possible incentives in developing commercial applications including the Hall of Fame Award. Through interviews, views of award recipients were obtained on factors encouraging spinoffs as well as impediments to spinoffs. The researchers observed complex inter-relationships among the significant entities (government, individuals, large and small business), the importance of people, the importance of resource availability, and the significance of intrinsic motivation; drew preliminary conclusions pertaining to the direct and indirect influence of recognition like the Hall of Fame Award; and planned the direction for next year's follow-on research.

  18. A preliminary study of current multimedia information technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J.C.

    1997-03-01

    This paper surveys more than 70 articles published in the IEEE Multimedia journal and other journals. The survey summarizes aspects of multimedia information technology and categorizes application areas of multimedia information technology and interesting research areas related to it.

  19. ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM CASE STUDIES: DEMONSTRATING PROGRAM OUTCOMES

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This bookle...

  20. ISS and STS Commercial Off-the-Shelf Router Testing

    Science.gov (United States)

    Ivancie, William D.; Bell, Terry L.; Shell, Dan

    2002-01-01

    This report documents the results of testing performed with commercial off-the-shelf (COTS) routers and Internet Protocols (IPs) to determine if COTS equipment and IP could be utilized to upgrade NASA's current Space Transportation System (STS), the Shuttle, and the International Space Station communication infrastructure. Testing was performed by NASA Glenn Research Center (GRC) personnel within the Electronic Systems Test Laboratory (ESTE) with cooperation from the Mission Operations Directorate (MOD) Qualification and Utilization of Electronic System Technology (QUEST) personnel. The ESTE testing occurred between November 1 and 9, 2000. Additional testing was performed at NASA Glenn Research Center in a laboratory environment with equipment configured to emulate the STS. This report documents those tests and includes detailed test procedures, equipment interface requirements, test configurations and test results. The tests showed that a COTS router and standard Transmission Control Protocols and Internet Protocols (TCP/IP) could be used for both the Shuttle and the Space Station if near-error-free radio links are provided.

  1. Involvement of right STS in audio-visual integration for affective speech demonstrated using MEG.

    Science.gov (United States)

    Hagan, Cindy C; Woods, Will; Johnson, Sam; Green, Gary G R; Young, Andrew W

    2013-01-01

    Speech and emotion perception are dynamic processes in which it may be optimal to integrate synchronous signals emitted from different sources. Studies of audio-visual (AV) perception of neutrally expressed speech demonstrate supra-additive (i.e., where AV>[unimodal auditory+unimodal visual]) responses in left STS to crossmodal speech stimuli. However, emotions are often conveyed simultaneously with speech; through the voice in the form of speech prosody and through the face in the form of facial expression. Previous studies of AV nonverbal emotion integration showed a role for right (rather than left) STS. The current study therefore examined whether the integration of facial and prosodic signals of emotional speech is associated with supra-additive responses in left (cf. results for speech integration) or right (due to emotional content) STS. As emotional displays are sometimes difficult to interpret, we also examined whether supra-additive responses were affected by emotional incongruence (i.e., ambiguity). Using magnetoencephalography, we continuously recorded eighteen participants as they viewed and heard AV congruent emotional and AV incongruent emotional speech stimuli. Significant supra-additive responses were observed in right STS within the first 250 ms for emotionally incongruent and emotionally congruent AV speech stimuli, which further underscores the role of right STS in processing crossmodal emotive signals.

  2. STS-104 Crew Interview: Steve Lindsey

    Science.gov (United States)

    2001-01-01

    STS-104 Commander Steve Lindsey is seen being interviewed. He answers questions about his inspiration to become an astronaut and his career path. He gives details on the mission's goals and significance, its payload (the Joint Airlock and the external gas tanks), and the usefulness of the newly installed Canadian Robotic Arm (installed by STS-100 crew). Lindsey describes his role in the rendezvous, docking, undocking, and flyaround of the Atlantis Orbiter and the International Space Station (ISS) and discusses the mission's planned spacewalks.

  3. STS-110 Commander Bloomfield arrives for TCDT

    Science.gov (United States)

    2002-01-01

    KENNEDY SPACE CENTER, FLA. -- STS-110 Commander Michael Bloomfield waves as he gets ready to depart KSC for Houston. He and the rest of the crew were at KSC for Terminal Countdown Demonstration Test activities that included payload familiarization and a simulated launch countdown. Scheduled for launch April 4, the 11-day STS-110 mission will feature Space Shuttle Atlantis docking with the International Space Station (ISS) and delivering the S0 truss, the centerpiece-segment of the primary truss structure that will eventually extend over 300 feet.

  4. Technology User Groups and Early Childhood Education: A Preliminary Study

    Science.gov (United States)

    Parette, Howard P.; Hourcade, Jack J.; Blum, Craig; Watts, Emily H.; Stoner, Julia B.; Wojcik, Brian W.; Chrismore, Shannon B.

    2013-01-01

    This article presents a preliminary examination of the potential of Technology User Groups as a professional development venue for early childhood education professionals in developing operational and functional competence in using hardware and software components of a Technology toolkit. Technology user groups are composed of varying numbers of…

  5. Developing Technological Literacy: A Case Study of Technology Integration in a Latina Liberal Arts College

    Science.gov (United States)

    Razfar, Aria

    2008-01-01

    Over the last 10 years, information technology has been the fastest growing sector in the global economy. Nevertheless, technology and computer-based instruction have not been sufficiently integrated into the curriculum especially at institutions that serve primarily language minority, low income, and first generation, female college populations.…

  6. The Adoption of Grid Computing Technology by Organizations: A Quantitative Study Using Technology Acceptance Model

    Science.gov (United States)

    Udoh, Emmanuel E.

    2010-01-01

    Advances in grid technology have enabled some organizations to harness enormous computational power on demand. However, the prediction of widespread adoption of the grid technology has not materialized despite the obvious grid advantages. This situation has encouraged intense efforts to close the research gap in the grid adoption process. In this…

  7. Past speculations of future health technologies: a description of technologies predicted in 15 forecasting studies published between 1986 and 2010.

    Science.gov (United States)

    Doos, Lucy; Packer, Claire; Ward, Derek; Simpson, Sue; Stevens, Andrew

    2017-07-31

    To describe and classify health technologies predicted in forecasting studies. A portrait describing health technologies predicted in 15 forecasting studies published between 1986 and 2010 that were identified in a previous systematic review. Health technologies are classified according to their type, purpose and clinical use; relating these to the original purpose and timing of the forecasting studies. All health-related technologies predicted in 15 forecasting studies identified in a previously published systematic review. Outcomes related to (1) each forecasting study including country, year, intention and forecasting methods used and (2) the predicted technologies including technology type, purpose, targeted clinical area and forecast timeframe. Of the 896 identified health-related technologies, 685 (76.5%) were health technologies with an explicit or implied health application and included in our study. Of these, 19.1% were diagnostic or imaging tests, 14.3% devices or biomaterials, 12.6% information technology systems, eHealth or mHealth and 12% drugs. The majority of the technologies were intended to treat or manage disease (38.1%) or diagnose or monitor disease (26.1%). The most frequent targeted clinical areas were infectious diseases followed by cancer, circulatory and nervous system disorders. The most frequent technology types were for: infectious diseases-prophylactic vaccines (45.8%), cancer-drugs (40%), circulatory disease-devices and biomaterials (26.3%), and diseases of the nervous system-equally devices and biomaterials (25%) and regenerative medicine (25%). The mean timeframe for forecasting was 11.6 years (range 0-33 years, median=10, SD=6.6). The forecasting timeframe significantly differed by technology type (p=0.002), the intent of the forecasting group (p<0.001) and the methods used (p<001). While description and classification of predicted health-related technologies is crucial in preparing healthcare systems for adopting new innovations

  8. Development and Validation of Information Technology Mentor Teacher Attitude Scale: A Pilot Study

    Science.gov (United States)

    Saltan, Fatih

    2015-01-01

    The aim of this study development and validation of a teacher attitude scale toward Information Technology Mentor Teachers (ITMT). ITMTs give technological support to other teachers for integration of technology in their lessons. In the literature, many instruments have been developed to measure teachers' attitudes towards the technological tools…

  9. Study on mineral processing technology for abrasive minerals

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Seong Woong; Yang, Jung Il; Hwang, Seon Kook; Choi, Yeon Ho; Cho, Ken Joon; Shin, Hee Young [Korea Inst. of Geology Mining and Materials, Taejon (Korea, Republic of)

    1995-12-01

    Buyeo Materials in Buyeogun, Choongnam province is a company producing feldspar concentrate, but does not yet utilize the garnet as abrasive material and other useful heavy minerals wasted out from the process of feldspar ore. The purpose of this study is to develop technology and process for the recovery of garnet concentrate. As results, the garnet is defined as ferro manganese garnet. The optimum process for recovery of garnet concentrate is to primarily concentrate heavy minerals from tailings of feldspar processing. And secondly the heavy minerals concentrated is dried and separated garnet concentrate from other heavy minerals. At this time, the garnet concentrate is yield by 0.176%wt from 0.31%wt of heavy minerals in head ore. The garnet concentrate contains 33.35% SiO{sub 2}, 12.20% Al{sub 2}O{sub 3}, 28.47% Fe{sub 2}O{sub 3}, 11.96% MnO. As for utilization of abrasive materials, a fundamental data was established on technology of grinding and classification. (author). 13 refs., 47 figs., 24 tabs.

  10. Experimental study on MSW gasification and melting technology

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In order to develop municipal solid waste (MSW) gasification and melting technology, two preliminary experiments and a principle integrated experiment were fulfilled respectively. The gasification characteristics of MSW are studied at 500-750℃ when equivalence ratio (ER) was 0.2-0.5 using a fluidized-bed gasifier. When temperature was 550-700℃ and ER was 0.2-0.4, low heat value (LHV) of syngas reaches 4000-12000 kJ/Nm3. The melting characteristics of fly ash were investigated at 1100-1460℃ using a fixed-bed furnace. It was proved that over 99.9% of dioxins could be decomposed and most heavy-metals could be solidified when temperature was 1100-1300℃. The principle integrated experiment was carried out in a fluidized-bed gasification and swirl-melting system. MSW was gasified efficiently at 550-650℃, swirl-melting furnace maintains at 1200-1300℃ stably and over 95% of fly ash could be caught by the swirl-melting furnace. The results provided much practical experience and basic data to develop MSW gasification and melting technology.

  11. Application of Raman spectroscopy technology to studying Sudan I

    Science.gov (United States)

    Li, Gang; Zhang, Guoping; Chen, Chen

    2006-06-01

    Being an industrial dye, the Sudan I may have a toxic effect after oral intake on the body, and has recently been shown to cause cancer in rats, mice and rabbits. Because China and some other countries have detected the Sudan I in samples of the hot chilli powder and the chilli products, it is necessary to study the characteristics of this dye. As one kind of molecule scattering spectroscopy, Raman spectroscopy is characterized by the frequency excursion caused by interactions of molecules and photons. The frequency excursion reflects the margin between certain two vibrational or rotational energy states, and shows the information of the molecule. Because Raman spectroscopy can provides quick, easy, reproducible, and non-destructive analysis, both qualitative and quantitative, with no sample preparation required, Raman spectroscopy has been a particularly promising technique for analyzing the characteristics and structures of molecules, especially organic ones. Now, it has a broad application in biological, chemical, environmental and industrial applications. This paper firstly introduces Sudan I dye and the Raman spectroscopy technology, and then describes its application to the Sudan I. Secondly, the fingerprint spectra of the Sudan I are respectively assigned and analyzed in detail. Finally, the conclusion that the Raman spectroscopy technology is a powerful tool to determine the Sudan I is drawn.

  12. A Case Study of the Application of SAMR and TPACK for Reflection on Technology Integration into Two Social Studies Classrooms

    Science.gov (United States)

    Hilton, Jason Theodore

    2016-01-01

    As emerging technology continues to enter the social studies classroom, teachers need to approach integration of such technology in a systematic manner to ensure that such technology enhances the learning of their students. Currently, scholars of technology integration advocate for the use of one of two different models, either SAMR or TPACK. This…

  13. A Case Study of the Application of SAMR and TPACK for Reflection on Technology Integration into Two Social Studies Classrooms

    Science.gov (United States)

    Hilton, Jason Theodore

    2016-01-01

    As emerging technology continues to enter the social studies classroom, teachers need to approach integration of such technology in a systematic manner to ensure that such technology enhances the learning of their students. Currently, scholars of technology integration advocate for the use of one of two different models, either SAMR or TPACK. This…

  14. The Impact of a Science/Technology/Society Teaching Approach on Student Learning in Five Domains

    Science.gov (United States)

    Akcay, Hakan; Yager, Robert E.

    2010-12-01

    The purpose of the study was to examine the effectiveness of the Chautauqua Professional Development Program in terms of the mastery of basic science concepts, understanding major science processes, use of creativity skills, improvement of student attitudes toward science, and the ability to apply science concepts and processes in new situations. Participants included twelve teachers who agreed to participate in an experimental study where Science, Technology, and Society (STS) strategies were utilized with two class sections where in one class the teacher determined the course structure and the form of instruction that was typically used. Conversely, the experimental class was almost exclusively student-centered. A total of twenty-four sections of students were in STS sections (365 students) and a similar number in control sections (359 students).The data collected were analyzed using quantitative methods. The results were tabulated and contrasted for students enrolled in the two sections for all the teachers. The results indicate that students in the student-centered STS sections achieved significantly better than students in the teacher-directed STS sections in terms of understanding and use of process skills, use of creativity skills, development of more positive attitudes; and the ability to apply science concepts in new contexts. However, there were no significant differences noted with respect to mastery of basic science concepts. Apparently student-centered STS approaches result in students with conceptual understandings but it is no better than the situation where teachers guide and direct inquiry STS approaches which focus much more exclusively on specific concepts and their definitions.

  15. STS-86 Pilot Mike Bloomfield speaks at TCDT

    Science.gov (United States)

    1997-01-01

    STS-86 Pilot Michael J. Bloomfield speaks to media representatives and other onlookers during Terminal Countdown Demonstration Test (TCDT) activities at Launch Pad 39A. This will be his first spaceflight. STS-86 will be the seventh docking of the Space Shuttle with the Russian Space Station Mir. During the docking, STS-86 Mission Specialist David A. Wolf will transfer to the orbiting Russian station and become a member of the Mir 24 crew, replacing U.S. astronaut C. Michael Foale, who has been on the Mir since the last docking mission, STS-84, in May. Launch of Mission STS-86 aboard the Space Shuttle Atlantis is targeted for Sept. 25.

  16. REVIEW OF EXISTING LCA STUDIES ON WASTE WATER TREATMENT TECHNOLOGIES

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Hauschild, Michael Zwicky

    The EU research project “NEPTUNE” is related to the EU Water Framework Directive and focused on the development of new waste water treatment technologies (WWTT) for municipal waste water. The sustainability of these WWTTs is going to be assessed by the use of life cycle assessment (LCA). New life...... cycle impact assessment methods on pathogens, whole effluent toxicity and micropollutants will be developed within the project. As part of this work a review of more than 20 previous LCA studies on WWTTs has been done and the findings are summarised on this poster. The review is focused on the relative...... even more treatment trains/scenarios) have already been the subject of more or less detailed LCAs. All life cycle stages may be important and all impact categories (except stratospheric ozone depletion) typically included in LCAs may show significance depending on the actual scenario. Potential impacts...

  17. Distance Education in Information Technology, a case study

    DEFF Research Database (Denmark)

    Helbo, Jan; Knudsen, Morten

    2002-01-01

    Project organized problem based learning is a successful concept for on-campus education at Aalborg University. The "Aalborg concept" has been used in networked distance education as well. This paper describes a project from the first year of our Master of Information Technology education organized...... with Internet-mediated project work. A group of 4 students carried out a project dependent on knowledge from two firms where two of the group members are working, making this a kind of Worked Based Learning (WBL). The project was formulated as a traditional on-campus type of project with the same complexity......, it is much more risky if the on-campus model is transferred directly to off-campus learning. The main reasons are that the students must communicate electronically, and that they are under a fierce time strain, studying part time and typically with a full time job and a family. Experiences with this type...

  18. Energy and cost savings results for advanced technology systems from the Cogeneration Technology Alternatives Study /CTAS/

    Science.gov (United States)

    Sagerman, G. D.; Barna, G. J.; Burns, R. K.

    1979-01-01

    The Cogeneration Technology Alternatives Study (CTAS), a program undertaken to identify the most attractive advanced energy conversion systems for industrial cogeneration applications in the 1985-2000 time period, is described, and preliminary results are presented. Two cogeneration options are included in the analysis: a topping application, in which fuel is input to the energy conversion system which generates electricity and waste heat from the conversion system is used to provide heat to the process, and a bottoming application, in which fuel is burned to provide high temperature process heat and waste heat from the process is used as thermal input to the energy conversion system which generates energy. Steam turbines, open and closed cycle gas turbines, combined cycles, diesel engines, Stirling engines, phosphoric acid and molten carbonate fuel cells and thermionics are examined. Expected plant level energy savings, annual energy cost savings, and other results of the economic analysis are given, and the sensitivity of these results to the assumptions concerning fuel prices, price of purchased electricity and the potential effects of regional energy use characteristics is discussed.

  19. Positioning technology development in the South African construction industry: a technology foresight study

    CSIR Research Space (South Africa)

    Rust, FC

    2011-04-01

    Full Text Available to year. One response to this situation is to position the construction industry with advanced technological solutions. However, the construction industry is renowned for low levels of innovation and the South African government has also underfunded...

  20. Study on analysis technology of the leakage current from Power facilities by using the laser technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Won Bin; Lee, Bok Kyu; Ohk, Young Hwan [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center; Han, Min Koo; Seung, Hwang Bo; Kwack, Hee Ro; Kim, Jae Chul [Electrical Engineering and Science Research Institute (Korea, Republic of)

    1995-12-31

    In order to apply the laser technology to the power systems, we widely investigated and analyzed optic fiber technology for signal transmissions, optic-sensor technology for detecting the physical quantum such as mechanical and electrical, and the base technology of laser application. The prototype was designed to detect the whole and the third harmonic current, for the analysis of the leakage current from gapless arrester. Also, the device was designed for portable use and for on-line checking. This prototype enables us to store and analyze the data easily by using the computer. Those stored data can be used as the reference data for estimating the extent of badness by analyzing and evaluating the trend of the leakage current with time. (author). 36 refs., 78 figs.

  1. STS-98 Crew Interview: Bob Curbeam

    Science.gov (United States)

    2001-01-01

    The STS-98 Mission Specialist Bob Curbeam is seen being interviewed. He answers questions about his inspiration to become an astronaut, his career path, and his training. He gives details on the mission's goals and significance, and the payload and hardware it brings to the International Space Station (ISS). Mr. Curbeam discusses his role in the mission's spacewalks and activities.

  2. STS-98 Crew Interview: Tom Jones

    Science.gov (United States)

    2001-01-01

    The STS-98 Mission Specialist Tom Jones is seen being interviewed. He answers questions about his inspiration to become an astronaut, his career path, and his training. He gives details on the mission's goals and significance, and the payload and hardware it brings to the International Space Station (ISS). Mr. Jones discusses his role in the mission's spacewalks and activities.

  3. Gestión Ciudadana de la Tecnología: Una aproximación desde los Science and Technology Studies a las redes wifi y la governance urbana a través de guifi.net Citizen Management of Technology: A Science and Technology Studies approach to wireless networks and urban governance trough guifi.net

    Directory of Open Access Journals (Sweden)

    Yann Bona Beauvois

    2011-03-01

    Full Text Available

    Tesis doctoral a cargo de Yann Bona presentada en el Departamento de Psicología Social de la Univesriddad Autónoma de Barcelona (UAB en diciembre del 2010. Dirigida por el Dr. Joan Pujol Tarrés.

    La tesis trata de ahondar en las formas en las que iniciativas ciudadanas que tienen por objeto la gestión de la tecnología en el espacio urbano se relacionan con las administraciones públicas. Lo hace a partir de nociones y conceptos de los STS tales como cosmopolítica, composición híbrida o democracia técnica. En síntesis, podemos decir que la tesis responde a la pregunta formulada por Bruno Latour de ¿qué significa hacer pasar la política del lado lo de la técnica?. Nosotros ofrecemos una propuesta centrada en lo que denominamos una sociotécnica de las políticas públicas.

    La tesis se basa en un estudio de caso centrado una red sin hilos libre y abierta (ubicada principalmente en Cataluña y llamada guifi.net surgida del deseo e iniciativa de la sociedad civil y que, hasta la fecha, es la más grande del mundo.

    Thesis presented at the Departament de Psicologia Social de la UAB by Yann Bona on December, 2010. Directed by Dr. Joan Pujol Tarrés.

    This dissertation explores the many ways in which citizens aiming to manage technologies in urban scape relate to public administrations. To accomplish it's task, it brings forward certain STS notions such as cosmopolitics, hybrid composition or technical democracy. On a general level, this thesis seeks an answer to Bruno Latour concern with what does it mean to conceive the technical as political?. We offer a set of conclusions based on what we choose to name a Sociotechnique of Public Policy .

    Our work relies on a case study focused on a free and open wireless network (located in Catalunya for the most part and called guifi.net that emerged from the desire and will of Civil Society wich, up to date, turns out to be the world's biggest free

  4. Leak detection, monitoring, and mitigation technology trade study update

    Energy Technology Data Exchange (ETDEWEB)

    HERTZEL, J.S.

    1998-11-10

    This document is a revision and update to the initial report that describes various leak detection, monitoring, and mitigation (LDMM) technologies that can be used to support the retrieval of waste from the single-shell tanks (SST) at the Hanford Site. This revision focuses on the improvements in the technical performance of previously identified and useful technologies, and it introduces new technologies that might prove to be useful.

  5. Application study of nuclear technologies for dual use

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jae Gon; Chung, W. S.; Park, W. S.; Lee, K. W.; Cha, H. K.; Han, M. H.; Yoon, J. S.; Honh, D. H.; Park, J. Y.; Lee, C. H.; Yeo, J. W.; Jung, M.; Ra, G. H

    2000-02-01

    The projects for the joint development of technology common to the civilian and military sectors are being carried out at national level to maximize the utilization of limited resources. The technologies have been identified through a process which considered whether they are duplicates of the present military technology, whether they are necessary, and whether their realization is feasible. In addition, the problems surfaced during the identification process have been analyzed and suggestions to vitalize the military application of civilian nuclear technology are presented in the contexts of personal channel, institutional networking, R and D information exchange, and budgetary support. (author)

  6. Health information management using optical storage technology: case studies.

    Science.gov (United States)

    Kohn, D

    1992-05-01

    All the health care facilities examined in the case studies addressed several important organizational issues before and during the installation of their systems. All the facilities examined employee commitment. The prudent managers considered how easily their employees adapt to changes in their jobs and work environment. They considered how enthusiastic cooperation can be fostered in the creation of a liberated and reengineered office. This was determined not only by each individual's reaction to change, but also by the health care facility's track record with other system installations. For example, document image, diagnostic image, and coded data processing systems allow the integration of divergent health care information systems within complex institutions. Unfortunately, many institutions are currently struggling with how to create an information management architecture that will integrate their mature systems, such as their patient care and financial systems. Information managers must realize that if optical storage technology-based systems are used in a strategic and planned fashion, these systems can act as focal points for systems integration, not as promises to further confuse the issue. Another issue that needed attention in all the examples was the work environment. The managers considered how the work environment was going to affect the ability to integrate optical image and data systems into the institution. For example, many of these medical centers have created alliances with clinics, HMOs, and large corporate users of medical services. This created a demand for all or part of the health information outside the confines of the original institution. Since the work environment is composed of a handful of factors such as merged medical services, as many work environment factors as possible were addressed before application of the optical storage technology solution in the institutions. And finally, the third critical issue was the organization of work

  7. A comparison study of commercially-available column flotation technologies

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, R.Q.; Mohanty, M.K.; Paul, B.C. [Southern Illinois Univ., Carbondale, IL (United States). Dept. of Mining Engineering; Ho, K. [Illinois Clean Coal Inst., Carterville, IL (United States)

    1994-12-31

    A direct comparison of three commercially-available column flotation technologies, i.e., Jameson Cell, Microcel, and Packed-Column, has been conducted using a {minus}100 mesh Illinois No. 5 flotation feed coal sample. The separation performance of each flotation technology was optimized and their performance levels compared on the basis of both ash rejection, sulfur rejection, and throughput capacities. A parametric study using a statistically-designed experimental program was conducted to optimize the critical operating parameter values of each column. The ultimate performance curves for each column were generated by conducting additional tests using the optimized operating parameter values. The throughput capacity of each flotation cell was determined by conducting tests over a range of feed rates at the maximum superficial gas rate while maintaining the other parameters at their optimum values. The separation performance achieved by each of the three flotation cells was found to be comparable to the idealistic flotation performance predicted by release analysis. However, the fraction of wash water reporting to tailings (bias factor) was found to be critical in achieving the near idealistic performance. The bias factor required for the Packed-Column was found to be less than that required by the other two flotation cells. The sulfur rejection achieved by the Microcel and the Packed-Column were found to be greater than that achieved by the Jameson Cell and all three produced sulfur rejections exceeding the values obtained from release analysis. The throughput capacity, on the other hand, differed among the three flotation columns. The Jameson Cell and the Microcel were found to have comparable throughput capacities while the Packed-Column was found to have a lower capacity.

  8. Analytical trade study of the STS payload environment. [design analysis and cost estimates for noise reduction devices for space shuttle orbiter payloads

    Science.gov (United States)

    Rader, W. P.; Barrett, S.; Raratono, J.; Payne, K. R.

    1976-01-01

    The current predicted acoustic environment for the shuttle orbiter payload bay will produce random vibration environments for payload components and subsystems which potentially will result in design, weight and cost penalties if means of protecting the payloads are not developed. Results are presented of a study to develop, through design and cost effectiveness trade studies, conceptual noise suppression device designs for space shuttle payloads. The impact of noise suppression on environmental levels and associated test costs, and on test philosophy for the various payload classes is considered with the ultimate goal of reducing payload test costs. Conclusions and recommendations are presented.

  9. Colloidal Gelation-2 and Colloidal Disorder-Order Transition-2 Investigations Conducted on STS-95

    Science.gov (United States)

    Hoffmann, Monica T.

    2000-01-01

    The Colloidal Gelation-2 (CGEL 2) and Colloidal Disorder-Order Transition-2 (CDOT 2) investigations flew on Space Shuttle Discovery mission STS-95 (also known as the John Glenn Mission). These investigations were part of a series of colloid experiments designed to help scientists answer fundamental science questions and reduce the trial and error involved in developing new and better materials. Industries dealing with semiconductors, electro-optics, ceramics, and composites are just a few that may benefit from this knowledge. The goal of the CGEL 2 investigation was to study the fundamental properties of colloids to help scientists better understand their nature and make them more useful for technology. Colloids consist of very small (submicron) particles suspended in a fluid. They play a critical role in the technology of this country, finding uses in materials ranging from paints and coatings to drugs, cosmetics, food, and drink. Although these products are routinely produced and used, there are still many aspects of their behavior about which scientists know little. Understanding their structures may allow scientists to manipulate the physical properties of colloids (a process called "colloidal engineering") to produce new materials and products. Colloid research may even improve the processing of known products to enhance their desirable properties.

  10. The Turn to Technology in Social Studies of Science.

    Science.gov (United States)

    Woolgar, Steve

    1991-01-01

    Ways in which the special theoretical significance of the sociology of scientific knowledge (SSK) is affected by attempts to apply relativist-constructivism to technology are discussed. The injunction to consider "technology as text" is critically examined. Also discussed are the status, structure, potential, and implications of SSK. (KR)

  11. Study on Technology Solutions of CEFR Steam Generator

    Institute of Scientific and Technical Information of China (English)

    WU; Zhi-guang; YU; Hua-jin; LIAO; Zi-yu; ZHANG; Zhen-xing

    2012-01-01

    <正>The technology solutions of CFR1000 steam generator were researched which were compared and analyze with foreign fast reactor steam generator technology solutions. The comparative analysis included the integral/modular structure, the number of modules per loop, structure types, the

  12. The Acadian Dikes: An Interdisciplinary Study of Technology.

    Science.gov (United States)

    MacKinnon, Gregory; Yetman, Krista

    Technology has a unique place in the elementary classroom. It provides an unparalleled vehicle for integrating many traditional subject areas. It serves to break down curricular barriers while at the same time promoting situated learning. This paper describes the implementation of a unit that focuses on the technology of the dike systems. Dikes…

  13. Navigation studies based on the ubiquitous positioning technologies

    Science.gov (United States)

    Ye, Lei; Mi, Weijie; Wang, Defeng

    2007-11-01

    This paper summarized the nowadays positioning technologies, such as absolute positioning methods and relative positioning methods, indoor positioning and outdoor positioning, active positioning and passive positioning. Global Navigation Satellite System (GNSS) technologies were introduced as the omnipresent out-door positioning technologies, including GPS, GLONASS, Galileo and BD-1/2. After analysis of the shortcomings of GNSS, indoor positioning technologies were discussed and compared, including A-GPS, Cellular network, Infrared, Electromagnetism, Computer Vision Cognition, Embedded Pressure Sensor, Ultrasonic, RFID (Radio Frequency IDentification), Bluetooth, WLAN etc.. Then the concept and characteristics of Ubiquitous Positioning was proposed. After the ubiquitous positioning technologies contrast and selection followed by system engineering methodology, a navigation system model based on Incorporate Indoor-Outdoor Positioning Solution was proposed. And this model was simulated in the Galileo Demonstration for World Expo Shanghai project. In the conclusion, the prospects of ubiquitous positioning based navigation were shown, especially to satisfy the public location information acquiring requirement.

  14. Dispersing artifacts in FT-STS: a comparison of set point effects across acquisition modes

    Science.gov (United States)

    Macdonald, A. J.; Tremblay-Johnston, Y.-S.; Grothe, S.; Chi, S.; Dosanjh, P.; Johnston, S.; Burke, S. A.

    2016-10-01

    Fourier-transform scanning tunnelling spectroscopy (FT-STS), or quasiparticle interference, has become an influential tool for the study of a wide range of important materials in condensed matter physics. However, FT-STS in complex materials is often challenging to interpret, requiring significant theoretical input in many cases, making it crucial to understand potential artifacts of the measurement. Here, we compare the most common modes of acquiring FT-STS data and show through both experiment and simulations that artifact features can arise that depend on how the tip height is stabilized throughout the course of the measurement. The most dramatic effect occurs when a series of dI/dV maps at different energies are acquired with simultaneous constant current feedback; here a feature that disperses in energy appears that is not observed in other measurement modes. Such artifact features are similar to those arising from real physical processes in the sample and are susceptible to misinterpretation.

  15. STM/STS studies on YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} thin films treated with an atomic oxygen beam

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, Shigehiro; Kashiwaya, Satoshi; Terada, Norio; Tanaka, Yukio; Tanuma, Yasunari; Koyanagi, Masao; Obara, Kozo

    2003-05-15

    The surface electronic states of YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) films are studied by scanning tunneling microscopy/spectroscopy at 10 K. In order to improve the sample surface quality, we have developed a vacuum transfer system combined with an atomic oxygen beam. The conductance spectra of the YBCO films showed the gap structure in most area of the surface, which indicates the successful surface treatment in the present system. The spatial variation of electronic states observed near a step structure suggests the presence of interference effect of the d-wave pair potential induced by surface roughness.

  16. Technological and economic study of ship recycling in Egypt

    Science.gov (United States)

    Welaya, Yousri M. A.; Abdel Naby, Maged M.; Tadros, Mina Y.

    2012-12-01

    The ship recycling industry is growing rapidly. It is estimated that the International Maritime Organization's (IMO) decision to phase-out single hull tankers by 2015 will result in hundreds of ships requiring disposal. At present, the ship recycling industry is predominantly based in South Asia. Due to the bad practice of current scrapping procedure, the paper will highlight the harm occurring to health, safety and environment. The efforts of the Marine Environment Protection Committee (MEPC) which led to the signing of the Hong Kong International Convention are also reviewed. The criteria and standards required to reduce the risk and damage to the environment are discussed and a proposed plan for the safe scrapping of ships is then presented. A technological and economic study for the ship recycling in Egypt is carried out as a case study. This includes the ship recycling facility size and layout. The equipment and staff required to operate the facility are also evaluated. A cost analysis is then carried out. This includes site development, human resources, machineries and equipment. A fuzzy logic approach is used to assess the benefits of the ship breaking yard. The use of the fuzzy logic approach is found suitable to make decisions for the ship breaking industry. Based on given constraints, the proposed model has proved capable of assessing the profit and the internal rate of return.

  17. Use of wearable technology for performance assessment: a validation study.

    Science.gov (United States)

    Papi, Enrica; Osei-Kuffour, Denise; Chen, Yen-Ming A; McGregor, Alison H

    2015-07-01

    The prevalence of osteoarthritis is increasing globally but current compliance with rehabilitation remains poor. This study explores whether wearable sensors can be used to provide objective measures of performance with a view to using them as motivators to aid compliance to osteoarthritis rehabilitation. More specifically, the use of a novel attachable wearable sensor integrated into clothing and inertial measurement units located in two different positions, at the waist and thigh pocket, was investigated. Fourteen healthy volunteers were asked to complete exercises adapted from a knee osteoarthritis rehabilitation programme whilst wearing the three sensors including five times sit-to-stand test, treadmill walking at slow, preferred and fast speeds. The performances of the three sensors were validated against a motion capture system and an instrumented treadmill. The systems showed a high correlation (r(2) > 0.7) and agreement (mean difference range: -0.02-0.03 m, 0.005-0.68 s) with gold standards. The novel attachable wearable sensor was able to monitor exercise tasks as well as the inertial measurement units (ICC > 0.95). Results also suggested that a functional placement (e.g., situated in a pocket) is a valid position for performance monitoring. This study shows the potential use of wearable technologies for assessing subject performance during exercise and suggests functional solutions to enhance acceptance.

  18. Knowledge Consolidation Analysis: Toward a Methodology for Studying the Role of Argument in Technology Development

    Science.gov (United States)

    Dyehouse, Jeremiah

    2007-01-01

    Researchers studying technology development often examine how rhetorical activity contributes to technologies' design, implementation, and stabilization. This article offers a possible methodology for studying one role of rhetorical activity in technology development: knowledge consolidation analysis. Applying this method to an exemplar case, the…

  19. The ECAR Study of Undergraduate Students and Information Technology, 2010. Key Findings

    Science.gov (United States)

    Smith, Shannon D.; Caruso, Judith Borreson

    2010-01-01

    This document presents the key findings from "The ECAR Study of Undergraduate Students and Information Technology, 2010". Since 2004, the annual ECAR (EDUCAUSE Center for Applied Research) study of undergraduate students and information technology has sought to shed light on how information technology affects the college experience. We…

  20. Peningkatan Keterampilan Membaca Teks Arab Gundul melalui Aktifitas Membaca Intensif Berbasis Gramatikal : Studi Kasus Mahasiswa Bahasa dan Sastra Arab IAIN STS Jambi

    Directory of Open Access Journals (Sweden)

    Sri Sudiarti

    2015-06-01

    Full Text Available The objective of this study was to describe: 1 How to teach reading Arabic non syakal through grammatical-based reading activity, 2 The improvement of reading skill of Arabic non syakal through grammatical-based reading activity, and 3 The students’ respond to the teaching of reading of Arabic non syakal. This is a classroom action research. The data was collected by distributing questionnaires and conducting a test to students. The data analyzed by using Miles and Hubberman model. The result of this study found : 1 The students’ reading ability of Arabic non syakal improved after the implementation of grammatical-based reading activity, 2 The students motivated and enjoyed learning Arabic reading non syakal through grammatical-based reading activity, 3 The students stated that the textbook is applicable to help them understand Arabic text non syakal, and 4 There was a positive respond of the students after learning Arabic reading non syakal through grammatical-based reading activity.

  1. A continuation of base-line studies for environmentally monitoring Space Transportation System (STS) at John F. Kennedy Space Center. Volume 1: Terrestrial community analysis

    Science.gov (United States)

    Stout, I. J.

    1979-01-01

    Vegetation and small mammal populations in or around the Merritt Island area were studied. Thirty sites were selected from plant communities which were relatively free of logging, grazing, and clearing operations. The vegetative analysis was designed to yield a quantitative description and ecological explanation of the major types of upland vegetation in order to determine the possible future effects of NASA space activities on them. Changes in the relative abundance of small mammal populations, species diversity, standing crop biomass, reproductive activity, and other demographic features were documented in order to gather sufficient information on these populations so that it would be possible to detect even the smaller nonnatural behavior changes in the mammals which might be attributable to NASA space activities.

  2. Sensemaking processes of organizational identity and technological capabilities: an empirical study in new technology-based firms

    Directory of Open Access Journals (Sweden)

    Julio César Acosta-Prado

    2013-09-01

    Full Text Available This article analyzes the sensemaking processes of organizational identity and technological capabilities that are facilitators of innovation at New-Technology-Based Firms (NTBFs. The research proposal points out that in this kind of organization, the knowledge transferred by these processes simultaneously addresses two core aspects: their organizational identity and technological capabilities. From a theoretical point of view, our study links two conceptual frameworks (organizational identity and technological capabilities, rarely mentioned together in the preceding research. From a practical point of view, the findings identify these processes and suggest that in this kind of organization both take place simultaneously, which could help stakeholders improve their management. Hence, members and managers of these organizations should take these processes into account as a framework to achieve competitiveness and therefore success.

  3. Implementation of renewable technologies - Opportunities and barriers. Zimbabwe country study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    Renewable Energy Technologies (RETS) have over the years become an integral part of the energy supply chain in most developed countries. Recent projections show that 13.5% of the world's primary energy supply comes from renewable and this figure has an aggregated annual growth rate of 16%. Wind has the highest annual growth rate of 22% while the least annual growth rate of 2% is for hydropower. The main push for renewable like wind in the OECD countries are environmental concerns and the business aspect in power generation. The situation is however completely different in Africa, where the thrust for RETs is developmental based. Although the continent has abundant renewable energy resources like solar, biomass, wind and hydro potential, they have remained largely unexploited. Several efforts have been made to help African countries like Zimbabwe to exploit such resources. The main objectives of this country study included review of Zimbabwe's development of past RETs, establish barriers related lessons learnt from such projects and currently running RETs projects, identify barriers experienced by other projects and then select a few barrier removal projects and then develop them with the help of all stake holders in the country. The methodology of this study involved a review of past RETs projects to establish barriers faced and barriers related lessons learnt. An examination of the policy instruments related to RETs was done to establish how they promote the dissemination of the technologies as well as their adequacy. A survey of all possible RETs projects in the country was carried out and in this survey the end-users were visited and interviewed by the research team. An initial workshop, which was attended by all stake holders, was held in November 1999. An Advisory committee on RETs in Zimbabwe was then set up comprising of various stake holders from government, the private sector, research institutions, interviewed end-users and the NGO community

  4. The STS Analysis of Leisure Industry%休闲产业的STS分析

    Institute of Scientific and Technical Information of China (English)

    张小玲

    2011-01-01

    现代科学技术引起了人类社会生活的深刻变化,改变了人类的生活方式,使得休闲日益成为人类生活的重要组成部分。而为满足人们休闲的需要组织起来的休闲产业则是休闲得以实现的条件。休闲产业是以人的自由、幸福为目标,它为科技的发展确定了一个方向。而科技为人们的休闲生活营造了一个良好的社会、人文环境。本文正是从休闲产业和科学技术之间的辩证关系着手,对休闲产业进行STS分析研究,从而探寻休闲产业所蕴涵的人的价值以及生命存在的本质和意义。%The modern science and technology have caused profound changes in human's social life,changed the human life style and made leisure increasingly become an important part of human life.And the need to meet the people leisure organized recreational industries are the leisure to the realization of conditions.Leisure industry based on human freedom,happiness as a goal,it is the development of science and technology to determine a direction.But technology for people's leisure life creates a good social cultural environment.This article is from leisure industry and dialectical relationship between science and technology of leisure industry,starting to study to explore STS analysis of leisure industry contains the value and the essence of life existence significance and meaning.

  5. Improving Assistive Technology Service by Using 3D Printing: Three Case Studies.

    Science.gov (United States)

    Watanabe, Takashi; Hatakeyama, Takuro; Tomiita, Mitsuru

    2015-01-01

    Assistive technology services are essential for adapting assistive devices to the individual needs of users with disabilities. In this study, we attempted to apply three-dimensional (3D) printing technology to three actual cases, and to study its use, effectiveness, and future applications. We assessed the usefulness of 3D printing technology by categorizing its utilization after reviewing the outcomes of these case studies. In future work, we aim to gather additional case studies and derive information on using 3D printing technology that will enable its effective application in the process of assistive technology services.

  6. Dear Professor Dyson twenty years of correspondence between Freeman Dyson and undergraduate students on science, technology, society and life

    CERN Document Server

    Neuenschwander, Dwight E

    2016-01-01

    Freeman Dyson has designed nuclear reactors and bomb-powered spacecraft; he has studied the origins of life and the possibilities for the long-term future; he showed quantum mechanics to be consistent with electrodynamics and started cosmological eschatology; he has won international recognition for his work in science and for his work in reconciling science to religion; he has advised generals and congressional committees. An STS (Science, Technology, Society) curriculum or discussion group that engages topics such as nuclear policies, genetic technologies, environmental sustainability, the role of religion in a scientific society, and a hard look towards the future, would count itself privileged to include Professor Dyson as a class participant and mentor. In this book, STS topics are not discussed as objectified abstractions, but through personal stories. The reader is invited to observe Dyson's influence on a generation of young people as they wrestle with issues of science, technology, society, life in g...

  7. Trends in Global Assisted Reproductive Technologies Research: a Scientometrics study

    Science.gov (United States)

    Okhovati, Maryam; Zare, Morteza; Zare, Fatemeh; Bazrafshan, Maliheh Sadat; Bazrafshan, Azam

    2015-01-01

    Introduction This study illustrated the global contribution to assisted reproductive technologies (ARTs) research in MEDLINE database from 1998 to 2014. Methods In March 2015, the MEDLINE database was searched for research publications indexed under ‘reproductive techniques, assisted’ (including the following MeSH headings: in vitro fertilization [IVF]; intracytoplasmic sperm injections; cryopreservation; and ovulation induction), with the following expressions in the fields of title or abstract: intrauterine insemination; sperm donation; embryo/egg donation and surrogate mothers. The number of publications in MEDLINE database was recorded for each individual year, 1998–2014, and for each country. The following countries were arbitrarily selected for data retrieval: United States, United Kingdom, France, Germany, Canada, Italy, Japan (G7 countries), Brazil, Russia, India, China (BRIC countries), Egypt, Turkey, Israel and Iran. Results The absolute number of publications for each country from 1998 to 2014 ranged from 75 to 16453, with a median of 2024. The top five countries were the US (16453 publications), the UK (5427 publications), Japan (4805), China (4660) and France (3795). ART (20277), cryopreservation (11623) and IVF (11209) were the most researched areas. Conclusion Global research on ARTs were geographically distributed and highly concentrated among the world’s richest countries. Cryopreservation and IVF were the most productive research domains among ARTs. PMID:26813255

  8. Application of positrons to the study of thin technological films

    CERN Document Server

    Nathwani, M

    2001-01-01

    Positron Doppler broadening experiments using variable-energy positron beams with positron implantation energy range 0-25 keV and 0-30 keV, respectively, have been performed on a selection of thin technological films. By measuring the spectrum of the 511 keV annihilation gamma-rays photopeak the profile of the Doppler broadening of the photopeak, due to the motion of the annihilating positron-electron pair, can be analysed. Varying the incident positron energy enables the positron t$ probe a sample at different depths which makes it possible to study samples by analysing the Doppler broadening of the photopeak as a function of positron depth. The Doppler broadening experiments on gallium nitride films with different crystallographic orientations revealed distortions in the Doppler broadened profile at low energies. The distortions were identified to be a consequence of significant para-positronium annihilation taking place near the sample surface. A parameter based on the proportion of positrons trapped at an...

  9. [Microalgae Species Identification Study with Raman Microspectroscopy Technology].

    Science.gov (United States)

    Shao, Yong-ni; Pan, Jian; Jiang, Lu-lu; He, Yong

    2015-07-01

    Identification and classification of microalgae are basis and premise in the study of physiological and biochemical characteristics for microalgae. Microalgae cells mainly consist of five kinds of biological molecules, including proteins, carbonhydrates, lipids, nucleic acids and pigments. These five kinds of biological molecules contents with different ratio in microalgae cells can be utilized to identify microalgae species as a supplement method. This paper investigated the application of Raman microspectroscopy technology in the field of rapid identification on different algae species such as aschlorella sp. and chlamydomonas sp. . Cultivated in the same conditions of culture medium, illumination duration and intensity, these two kinds of species of microalgae cells were immobilized by using agar, and then the samples were placed under 514. 5 nm Raman laser to collect Raman spectra of different growth periods of different species. An approach to remove fluorescence background in Raman spectra called Rolling Circle Filter (RCF) algorithm was adopted to remove the fluorescent background, and then some preprocessing methods were used to offset the baseline and smooth method of Savitzky-Golay was tried to make the spectra curves of total 80 samples smoother. Then 50 samples were randomly extracted from 80 samples for modeling, and the remaining 30 samples for independent validation. This paper adopted different pretreatment methods, and used the partial least squares (PLS) to establish model between the spectral data and the microalgae species, then compared the effects of different pretreatment methods. The results showed that with Raman microspectroscopy technology, the pretreatment method of max-peak ratio standardization was a more effective identification approach which utilizes the different content ratios of pigments of different microalgae species. This method could efficiently eliminate the influence on Raman signal due to different growth stages of

  10. Indicators of creativity in a technology class: a case study

    African Journals Online (AJOL)

    Schools must encourage learners to be creative and Technology Edu- cation provides an .... creative abilities Couger (1995:370) states that " the capacity to pro- duce original ... out ... um ... who was what ideas was best and what would work?

  11. US EPA's UV Disinfection Technologies Demonstration Study - States Briefing

    Science.gov (United States)

    EPA report and anticipated Journal articles will provide recommendations & guidance based on lessons learned for subsequent UV technology testing and monitoring/control applications of virus inactivation in drinking water.

  12. Study of LANs access technologies in wind power system

    DEFF Research Database (Denmark)

    Wei, Mu; Chen, Zhe

    2010-01-01

    Due to the energy challenges in the world, new types of generation technologies, such as renewable energy based generators, attract great attention and are being quickly developed, which results in the dramatic developments and changes in modern power systems, the communication technologies play...... a increasingly important role in guaranteeing the power system’s stability, reliability, and security. In this paper the necessity of communication technologies employed in wind power system are introduced. According the International Standards Organization (ISO) reference 7-layered model, the communication...... power environment are explained and discussed. Furthermore the simulation of application of Ethernet in an offshore wind farm communication network by a software, OPNET, is elaborated. With the investigation of the communication technologies in this paper, the offshore wind farm SCADA system can...

  13. Science, Technology and Social Change Course's Effects on Technological Literacy Levels of Social Studies Pre-Service Teachers

    Science.gov (United States)

    Yigit, E. Ozlem

    2013-01-01

    Social studies curricula are required in order to prepare to educate children who continue to learn after their formal training, and it is vital that teachers receive an education properly. In Social Studies Education Departments of Education Faculties Science, Technology and Social Change course is convenient to this aim and it contributes to…

  14. Constitutional moments in governing science and technology.

    Science.gov (United States)

    Jasanoff, Sheila

    2011-12-01

    Scholars in science and technology studies (STS) have recently been called upon to advise governments on the design of procedures for public engagement. Any such instrumental function should be carried out consistently with STS's interpretive and normative obligations as a social science discipline. This article illustrates how such threefold integration can be achieved by reviewing current US participatory politics against a 70-year backdrop of tacit constitutional developments in governing science and technology. Two broad cycles of constitutional adjustment are discerned: the first enlarging the scope of state action as well as public participation, with liberalized rules of access and sympathetic judicial review; the second cutting back on the role of the state, fostering the rise of an academic-industrial complex for technology transfer, and privatizing value debates through increasing delegation to professional ethicists. New rules for public engagement in the United Sates should take account of these historical developments and seek to counteract some of the anti-democratic tendencies observable in recent decades.

  15. Study on Modern Agriculture Equipment and Technology Coordinating Innovation

    Institute of Scientific and Technical Information of China (English)

    Weilong; WANG; Zulin; DA

    2013-01-01

    As the material foundation of agriculture modernization, the modernization level of agricultural equipment and technology is the significant signal of agricultural modernization, and the advancement of agricultural modernization is the important content of building a well-off society in an all-around way. Upgrading key technology research ability and promoting agricultural mechanization and industry development not only can shorten the gap between agricultural development level in China and that in developed countries, but also can advance the modernization process of China.

  16. Information and Communications Technology Industry: Spring 2007 Industry Study

    Science.gov (United States)

    2007-01-01

    investments and portable/consumer applications were identified as very dynamic segments of the ICT market, with the major share of venture capital...continuing to flow into ICT (Information Technology Outlook 2006 Highlights, 2007, p. 3). 6 ICT’s “Flattening” Effect Like venture capitalists... Greenfield , 2006. p. 1). Recommendations • Continue government-industry work through the National Institute of Standards and Technology to develop the

  17. US country studies program: Support for climate change studies, national plans, and technology assessments

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    This paper describes the objectives of the next phase of the U.S. Country Studies Program which was launched in support of the Framework Convention on Climate Change (FCCC). The next phases of this program aim to: assist countries in preparing Climate Change Action plans; support technology assessments and development of technology initiatives; enhance exchange of information and expertise in support of FCCC. The program offers support for these processes in the form of handbooks which have been published to aid in preparing action plans, and to provide information on methane, forestry, and energy technologies. In addition an array of training workshops have been and are scheduled to offer hands on instruction to participants, expert advice is available from trained personnel, and modeling tools are available to aid in development of action plans.

  18. Benchmark Problems of the Geothermal Technologies Office Code Comparison Study

    Energy Technology Data Exchange (ETDEWEB)

    White, Mark D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Podgorney, Robert [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kelkar, Sharad M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McClure, Mark W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Danko, George [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ghassemi, Ahmad [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fu, Pengcheng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bahrami, Davood [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Barbier, Charlotte [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cheng, Qinglu [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chiu, Kit-Kwan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Detournay, Christine [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elsworth, Derek [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fang, Yi [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Furtney, Jason K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gan, Quan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gao, Qian [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Guo, Bin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hao, Yue [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Horne, Roland N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Huang, Kai [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Im, Kyungjae [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Norbeck, Jack [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rutqvist, Jonny [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Safari, M. R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sesetty, Varahanaresh [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sonnenthal, Eric [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tao, Qingfeng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); White, Signe K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wong, Yang [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Xia, Yidong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-12-02

    A diverse suite of numerical simulators is currently being applied to predict or understand the performance of enhanced geothermal systems (EGS). To build confidence and identify critical development needs for these analytical tools, the United States Department of Energy, Geothermal Technologies Office has sponsored a Code Comparison Study (GTO-CCS), with participants from universities, industry, and national laboratories. A principal objective for the study was to create a community forum for improvement and verification of numerical simulators for EGS modeling. Teams participating in the study were those representing U.S. national laboratories, universities, and industries, and each team brought unique numerical simulation capabilities to bear on the problems. Two classes of problems were developed during the study, benchmark problems and challenge problems. The benchmark problems were structured to test the ability of the collection of numerical simulators to solve various combinations of coupled thermal, hydrologic, geomechanical, and geochemical processes. This class of problems was strictly defined in terms of properties, driving forces, initial conditions, and boundary conditions. Study participants submitted solutions to problems for which their simulation tools were deemed capable or nearly capable. Some participating codes were originally developed for EGS applications whereas some others were designed for different applications but can simulate processes similar to those in EGS. Solution submissions from both were encouraged. In some cases, participants made small incremental changes to their numerical simulation codes to address specific elements of the problem, and in other cases participants submitted solutions with existing simulation tools, acknowledging the limitations of the code. The challenge problems were based on the enhanced geothermal systems research conducted at Fenton Hill, near Los Alamos, New Mexico, between 1974 and 1995. The problems

  19. Frameworks for future critical STS studies

    DEFF Research Database (Denmark)

    Markham, Annette

    history, and cultural heritage? What role do these three processes play in larger structures of Hegemonic culturing? Whatever we define as meaningful is at least a complex play of negotiations, alignments and realignments within society. How do digital infrastructures or platforms neutralize...... surveillance and mass data collection by companies that provide users with applications, platforms, and devices. At the same time, individuals are increasingly held personally responsible for actions online, while the platforms and infrastructures are portrayed as natural carriers and neutral collectors...

  20. How Science/Technology/Society relations are approached in the contents of organic functions in high school chemistry

    Directory of Open Access Journals (Sweden)

    Carmem Lúcia Costa Amaral

    2009-03-01

    Full Text Available This paper aimed to verify how the relation between Science/Technology/Society (STS is present in Chemistry textbooks recommended by the Brazilian Ministry of Education. The interest in textbooks is due to the fact that they constitute important resources used by teachers to prepare their classes. Thus, researches in this area are necessary to indicate how the authors could improve the quality of their books. We believe that one way to do this is the introduction of the STS relation, which took place because of the necessity in establishing new ways of teaching, specially the teaching of science. One of the goals of STS education is to create conditions to develop abilities and competences that qualify the students for discussions concerning scientific and technologic questions of everyday life. The analysis of testbooks used the descriptors and indicators developed by Fracalanza and Megid-Neto (2006 as reference. In order to carry out the study, we chose the area of Organic Chemistry, more specifically contents referring to organic functions, with great use in society. In general, the results showed that STS relations are not totally observed in the investigated contents, contributing to the development of Chemistry classes through activities apart from the students social context.

  1. STS-110 Flight Day 8 Highlights

    Science.gov (United States)

    2002-01-01

    On Flight Day 8 of the STS-110 mission, the combined members of the Atlantis STS-110 crew and the International Space Station (ISS) Expedition 4 crew, Commanders Michael J. Bloomfield and Yury I. Onufrienko, respectively, answer questions posed to them by press members on the ground. Topics covered include: challenges of long term space habitation, adequacy of training for the on-orbit construction of the space station, details on the Mobile Transporter (MT) railcar system. Footage of the MT directly precedes and follows the extended question and answer portion of the video. The MT is seen from a variety of angles, as it slowly moves from Workstation 4 to Workstation 5 in order to test its ability to grapple to a fixed point along the track. The MT will eventually be used as a base for the robot arm in order to perform maintenance and assembly tasks on the ISS.

  2. STS flight operations - Concept versus reality

    Science.gov (United States)

    Kranz, E. F.

    1985-01-01

    The NASA Lyndon B. Johnson Space Center Mission Operations Directorate (MOD) has the responsibility for planning, training, and implementing of flight operations in support of the National Space Transportation System (STS) Program. In this role, MOD has responsibility for the operational interface with customers and the translation of customer requirements into operating plans to satisfy their objectives. The basic objectives of flight operations are to maximize mission success, to minimize risks to the Orbiter and the crew, to decrease operating costs, and to achieve an effective balance in the application of all operational resources. In the National STS Program, to date, 20 missions have been flown and the process for planning, training, and flight operations has been thoroughly exercised. In this paper, MOD's performance is assessed, and those areas in which our initial operating concepts have been successful as well as those in which significant additional work is required are identified.

  3. Technological Studies at Thomas Edison Middle School. Grades 6-7-8.

    Science.gov (United States)

    Foster, Patrick N.

    This technology studies curriculum for grades 6-8 is a plan for each middle school student to experience technology education for approximately 60 days (1 trimester of a 180-day school year) in each grade. Section A provides definitions; structure or content for grade-level programs with science and technology unifiers (unifying curricular…

  4. Information Technology and Education for Library and Information Studies: The Challenge.

    Science.gov (United States)

    Large, Andrew

    1993-01-01

    Discusses the impact of advances in information technology on library school curriculum. Topics addressed include a history of information technology in library schools; the rate of technological change; education versus training; information studies versus computer science; future possibilities; and the relationship between practitioners and…

  5. Examination of Studies on Technology-Assisted Collaborative Learning Published between 2010-2014

    Science.gov (United States)

    Arnavut, Ahmet; Özdamli, Fezile

    2016-01-01

    This study is a content analysis of the articles about technology-assisted collaborative learning published in Science Direct database between the years of 2010 and 2014. Developing technology has become a topic that we encounter in every aspect of our lives. Educators deal with the contribution and integration of technology into education.…

  6. A Longitudinal Study of Information Technology Impact on Business Faculty in Distance Education

    Science.gov (United States)

    Zhao, Jensen, J.; Alexander, Melody W.; Perrreault, Heidi; Waldman, Lila

    2007-01-01

    This longitudinal study compared business faculty's use of information technology in distance education as well as their perception of the technology's impact on their productivity and technology preferences between 2000 and 2006. Data were collected from 81 professors in 2000 and 140 professors in 2006 at AACSB-accredited business colleges across…

  7. Former astronaut Armstrong witnesses STS-83 launch

    Science.gov (United States)

    1997-01-01

    Apollo l1 Commander Neil A. Armstrong and his wife, Carol, were among the many special NASA STS-83 launch guests who witnessed the liftoff of the Space Shuttle Columbia April 4 at the Banana Creek VIP Viewing Site at KSC. Columbia took off from Launch Pad 39A at 2:20:32 p.m. EST to begin the 16-day Microgravity Science Laboratory-1 (MSL-1) mission.

  8. STS-100 Crew Interview: Jeff Ashby

    Science.gov (United States)

    2001-01-01

    STS-100 Pilot Jeff Ashby is seen being interviewed. He answers questions about his inspiration to become an astronaut and his career path. He gives details on the mission's goals and significance, the rendezvous and docking of Endeavour with the International Space Station (ISS), the mission's spacewalks, and installation and capabilities of the Space Station robotic arm, UHF antenna, and Rafaello Logistics Module. Ashby then discusses his views about space exploration as it becomes an international collaboration.

  9. STS-64 SAFER Assembly development team members

    Science.gov (United States)

    1993-01-01

    The Simplified Aid for EVA Rescue (SAFER) system, to be tested on the STS-64 flight, is surrounded by the team members who have spent a number of recent man hours in preparation for the system's first test-flight. In front are (left to right) Russell L. Flack and Bob Lowe. In the back row are (left to right) Jack D. Humphreys, Chuck Deason, Bill Wood and James Brown.

  10. STS-47 Astronaut Crew Training Clip

    Science.gov (United States)

    1992-01-01

    The crew of STS-47, Commander Robert L. Gibson, Pilot Curtis L. Brown, Payload Commander Mark C. Lee, Mission Specialists N. Jan Davis, Jay Apt, and Mae C. Jemison, and Payload Specialist Mamoru Mohri, is seen during various parts of their training, including SAREX training in the Full Fuselage Trainer (FFT), firefighting training. A familiarization flight in the KC-135, a food tasting, photo training in the Crew Compartment Trainer, and bailout training in the Weightless Environment Training Facility (WETF) are also shown.

  11. STS-86 Pilot Michael Bloomfield suits up

    Science.gov (United States)

    1997-01-01

    STS-86 Pilot Michael J. Bloomfield relaxes for a moment while donning his launch and entry suit with the assistance of a suit technician in the Operations and Checkout Building. This will be Bloomfields first spaceflight. He and the six other crew members will depart shortly for Launch Pad 39A, where the Space Shuttle Atlantis awaits liftoff on a 10-day mission slated to be the seventh docking of the Space Shuttle with the Russian Space Station Mir.

  12. STS-96 Astronauts Adjust Unity Hatch

    Science.gov (United States)

    1999-01-01

    Aboard the International Space Station (ISS), astronauts Rick D. Husband and Tamara E. Jernigan adjust the hatch for the U.S. built Unity node. The task was part of an overall effort of seven crew members to prepare the existing portion of the International Space Station (ISS). Launched on May 27, 1999, aboard the Orbiter Discovery, the STS-96 mission was the second ISS assembly flight and the first shuttle mission to dock with the station.

  13. STS-100 Crew Interview: John Phillips

    Science.gov (United States)

    2001-01-01

    STS-100 Mission Specialist John Phillips is seen being interviewed. He answers questions about his inspiration to become an astronaut and his career path. He gives details on the mission's goals and significance, the rendezvous and docking of Endeavour with the International Space Station (ISS), the mission's spacewalks, and installation and capabilities of the Space Station robotic arm, UHF antenna, and Rafaello Logistics Module. Phillips then discusses his views about space exploration as it becomes an international collaboration.

  14. STS-69 Clears the tower (side view)

    Science.gov (United States)

    1995-01-01

    A pack of astronauts that run under the banner Dog Crew II heads for the stars. Liftoff of the Space Shuttle Endeavour from Launch Pad 39A occurred at 11:09:00.052 a.m. EDT, Sept. 7, 1995. 'Every dog has its day and today is your day,' KSC Orbiter Test Conductor Roger Gillette pledged to STS-69 Mission Commander David M. Walker, Pilot Kenneth D. Cockrell, Payload Commander James S. Voss and Mission Specialists Michael L. Gernhardt and James H. Newman prior to launch. The STS-69 astronaut crew developed a strong sense of comaraderie as they went through their flight training, and dubbed themselves the Dog Crew II to carry on a tradition that arose during an earlier Shuttle flight -- STS-53 -- to which both Voss and Walker were assigned. Each crew member adopted a dog-theme name: Walker is Red Dog; Cockrell, Cujo; Voss, Dogface; Newman, Pluto; and Gernhardt, the only space rookie, Underdog. A special patch, featuring a bulldog in a doghouse shaped like the Space Shuttle, was designed for the astronauts and other flight team members to wear. The Dog Crew II is embarking on an 11-day multifaceted mission featuring two free-flying scientific research spacecraft as well as a host of experiments in both the payload bay and the middeck. Also scheduled is an extravehicular activity, or spacewalk.

  15. Astronaut Sellers Performs STS-112 EVA

    Science.gov (United States)

    2002-01-01

    Launched October 7, 2002 aboard the Space Shuttle Orbiter Atlantis, the STS-112 mission lasted 11 days and performed three sessions of Extra Vehicular Activity (EVA). Its primary mission was to install the Starboard Side Integrated Truss Structure (S1) and Equipment Translation Aid (CETA) Cart to the International Space Station (ISS). The S1 truss provides structural support for the orbiting research facility's radiator panels, which use ammonia to cool the Station's complex power system. The S1 truss, attached to the S0 (S Zero) truss installed by the previous STS-110 mission, flows 637 pounds of anhydrous ammonia through three heat rejection radiators. The truss is 45-feet long, 15-feet wide, 10-feet tall, and weighs approximately 32,000 pounds. The CETA is the first of two human-powered carts that will ride along the International Space Station's railway providing a mobile work platform for future extravehicular activities by astronauts. In this photograph, Astronaut Piers J. Sellers uses both a handrail on the Destiny Laboratory and a foot restraint on the Space Station Remote Manipulator System or Canadarm2 to remain stationary while performing work at the end of the STS-112 mission's second space walk. A cloud-covered Earth provides the backdrop for the scene.

  16. Organization of Students’ Self-Study in Studying the Subject “Manufacturing Technology of Drugs”

    OpenAIRE

    Fedorovska, M.; Barna, O.; Bondarchuk, O.

    2014-01-01

    Modern society development requires that specialists must quickly adapt to new working conditions, act creatively and independently. Therefore, the purpose of the work is to reveal the importance and forms of students’ self-study, its assessment peculiarity in concern with the subject “Manufacturing technology of drugs” (MTD). The article presents the components and features of students’ self-study at the pharmaceutical department under credit-modular system of education on the example of MTD...

  17. TRENDS AND ISSUES: A REVIEW OF STUDIES RELATED TO TECHNOLOGY USAGE IN EARLY CHILDHOOD EDUCATION

    OpenAIRE

    Elif ÖZTÜRK YILMAZTEKİN; OLGAN, Refika

    2013-01-01

    This paper describes types of technology studies that have been conducted related to young children’s early education. A systematic review of studies was undertaken using EBSCOhost, Blackwell Synergy, and ScienceDirect databases, to identify all studies published between 2003 and 2009 according to specific criteria. The studies were selected on the basis of the following three issues: (1) the role of technology in children’s development, (2) the role of technology in teachers’ teaching pract...

  18. Ella-V and technology usage technology usage in an english language and literacy acquisition validation randomized controlled trial study

    Directory of Open Access Journals (Sweden)

    Roisin P. Corcoran

    2014-12-01

    Full Text Available This paper describes the use of technology to provide virtual professional development (VPD for teachers and to conduct classroom observations in a study of English Language Learner (ELL instruction in grades K–3. The technology applications were part of a cluster randomized control trial (RCT design for a federally funded longitudinal validation study of a particular program, English Language and Literacy Acquisition-Validation, ELLA- V, to determine its degree of impact on English oral language/literacy, reading, and science across 63 randomly assigned urban, suburban, and rural schools (first year of implementation. ELLA-V also examines the impact of bimonthly VPD for treatment teachers compared to comparison group teachers on pedagogical skills, measured by sound observation instruments, and on student achievement, measured by state/national English language/literacy/reading tests and a national science test. This study features extensive technology use via virtual observations, bimonthly VPD, and randomly assigned treatment and control schools with students served in English as second language (ESL instructional time. The study design and methodology are discussed relativeto the specialized uses of technology and issues involving the evaluation of technology’s contribution to the intervention of interest and of the efficient, cost-effective execution of the study.

  19. A Study of Scientometric Methods to Identify Emerging Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Abercrombie, Robert K [ORNL; Udoeyop, Akaninyene W [ORNL

    2011-01-01

    This work examines a scientometric model that tracks the emergence of an identified technology from initial discovery (via original scientific and conference literature), through critical discoveries (via original scientific, conference literature and patents), transitioning through Technology Readiness Levels (TRLs) and ultimately on to commercial application. During the period of innovation and technology transfer, the impact of scholarly works, patents and on-line web news sources are identified. As trends develop, currency of citations, collaboration indicators, and on-line news patterns are identified. The combinations of four distinct and separate searchable on-line networked sources (i.e., scholarly publications and citation, worldwide patents, news archives, and on-line mapping networks) are assembled to become one collective network (a dataset for analysis of relations). This established network becomes the basis from which to quickly analyze the temporal flow of activity (searchable events) for the example subject domain we investigated.

  20. A bridge between conceptual frameworks sciences, society and technology studies

    CERN Document Server

    2015-01-01

    This book analyzes scientific problems within the history of physics, engineering, chemistry, astronomy and medicine, correlated with technological applications in the social context. When and how is tension between disciplines explicitly practised? What is the conceptual bridge between science researches and the organization of technological researches in the development of  industrial applications?  The authors explain various ways in which the sciences allowed advanced modelling on the one hand, and the development of new technological ideas on the other hand. An emphasis on the role played by mechanisms, production methods and instruments bestows a benefit on historical and scientific discourse: theories, institutions, universities, schools for engineers, social implications as well.  Scholars from different traditions discuss the emerging style of thinking in methodology and, in theoretical perspective, aim to gather and re-evaluate the current thinking on this subject. It brings together contribution...

  1. Priority setting for new technologies in medicine: A transdisciplinary study

    Science.gov (United States)

    Gibson, Jennifer L; Martin, Douglas K; Singer, Peter A

    2002-01-01

    Background Decision makers in health care organizations struggle with how to set priorities for new technologies in medicine. Traditional approaches to priority setting for new technologies in medicine are insufficient and there is no widely accepted model that can guide decision makers. Discussion Daniels and Sabin have developed an ethically based account about how priority setting decisions should be made. We have developed an empirically based account of how priority setting decisions are made. In this paper, we integrate these two accounts into a transdisciplinary model of priority setting for new technologies in medicine that is both ethically and empirically based. Summary We have developed a transdisciplinary model of priority setting that provides guidance to decision makers that they can operationalize to help address priority setting problems in their institution. PMID:12126482

  2. Priority setting for new technologies in medicine: A transdisciplinary study

    Directory of Open Access Journals (Sweden)

    Gibson Jennifer L

    2002-07-01

    Full Text Available Abstract Background Decision makers in health care organizations struggle with how to set priorities for new technologies in medicine. Traditional approaches to priority setting for new technologies in medicine are insufficient and there is no widely accepted model that can guide decision makers. Discussion Daniels and Sabin have developed an ethically based account about how priority setting decisions should be made. We have developed an empirically based account of how priority setting decisions are made. In this paper, we integrate these two accounts into a transdisciplinary model of priority setting for new technologies in medicine that is both ethically and empirically based. Summary We have developed a transdisciplinary model of priority setting that provides guidance to decision makers that they can operationalize to help address priority setting problems in their institution.

  3. Night image of New York City as seen from STS-59 Endeavour

    Science.gov (United States)

    1994-01-01

    This 35mm night image of the New York City metropolitan area was captured by the crew of the STS-59 crew during the Space Radar Laboratory (SRL) mission. Scientists studying film from the Space Shuttle Endeavour feel this is the best nocturnal view of this region from the manned space program.

  4. The study of the life cycle of technology assessment model

    Institute of Scientific and Technical Information of China (English)

    SHEN Yu-Zhi; HUANG Xun-jiang

    2001-01-01

    The life cycle of technology is one of the most important indexes to weigh up the risk of the investment to neo-tech. There are so many uncertainties because it is conditioned by a lot of factors, we can not make a rational forecasting by traditional assessment method. So this paper gives a conprehensive consideration to the factors that influence production and makes some modification to production function, and establishes the life cycle of technology assessmet model by the method of fuzzy mathematics. So it quantifies the risk of investment. We can take it as one foundational index for the decision making of the investment.

  5. Study plan for critical renewable energy storage technology (CREST)

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2009-01-18

    Now is the time to plan to integrate significant quantities of distributed renewable energy into the electricity grid. Concerns about climate change, the adoption of state-level renewable portfolio standards and incentives, and accelerated cost reductions are driving steep growth in U.S. renewable energy technologies. The number of distributed solar photovoltaic (PV) installations and wind farms are growing rapidly. The potential for concentrated solar power (CSP) also continues to grow. As renewable energy technologies mature, they can provide a significant share of our nation’s electricity requirements.

  6. A Study on Radio Access Technology Selection Algorithms

    CERN Document Server

    Wu, Leijia

    2012-01-01

    This book discusses the basic idea of Common Radio Resource Management (CRRM), especially on the Radio Access Technologies selection part of CRRM. It introduces two interaction functions (information reporting function and RRM decision support function) and four interaction degrees (from low to very high) of CRRM. Four possible CRRM topologies (CRRM server, integrated CRRM, Hierarchical CRRM, and CRRM in user terminals) are described. The book presents different Radio Access Technologies selection algorithms, including single criterion and multiple criteria based algorithms are presented and compares them. Finally, the book analyses the advantages and disadvantages of the different selection algorithms.

  7. Extending GIS Technology to Study Karst Features of Southeastern Minnesota

    Science.gov (United States)

    Gao, Y.; Tipping, R. G.; Alexander, E. C.; Alexander, S. C.

    2001-12-01

    of Southeastern Minnesota. The Karst Feature Database of Winona County is being expanded to include all the mapped karst features of southeastern Minnesota. Air photos from 1930s to 1990s of Spring Valley Cavern Area in Fillmore County were scanned and geo-referenced into our GIS system. This technology has been proved to be very useful to identify sinkholes and study the rate of sinkhole development.

  8. STS-31 Mission Onboard Photograph-Hubble Space Telescope

    Science.gov (United States)

    1990-01-01

    In this photograph, the Hubble Space Telescope (HST) was being deployed on April 25, 1990. The photograph was taken by the IMAX Cargo Bay Camera (ICBC) mounted in a container on the port side of the Space Shuttle orbiter Discovery (STS-31 mission). The purpose of the HST, the most complex and sensitive optical telescope ever made, is to study the cosmos from a low-Earth orbit for 15 years or more. The HST provides fine detail imaging, produces ultraviolet images and spectra, and detects very faint objects. Two months after its deployment in space, scientists detected a 2-micron spherical aberration in the primary mirror of the HST that affected the telescope's ability to focus faint light sources into a precise point. This imperfection was very slight, one-fiftieth of the width of a human hair. A scheduled Space Service servicing mission (STS-61) in 1993 permitted scientists to correct the problem. During four spacewalks, new instruments were installed into the HST that had optical corrections. The Marshall Space Flight Center had responsibility for design, development, and construction of the HST. The Perkin-Elmer Corporation, in Danbury, Cornecticut, developed the optical system and guidance sensors. Photo Credit: NASA/Smithsonian Institution/Lockheed Corporation.

  9. A Quantitative Study into the Information Technology Project Portfolio Practice: The Impact on Information Technology Project Deliverables

    Science.gov (United States)

    Yu, Wei

    2013-01-01

    This dissertation applied the quantitative approach to the data gathered from online survey questionnaires regarding the three objects: Information Technology (IT) Portfolio Management, IT-Business Alignment, and IT Project Deliverables. By studying this data, this dissertation uncovered the underlying relationships that exist between the…

  10. A Quantitative Study into the Information Technology Project Portfolio Practice: The Impact on Information Technology Project Deliverables

    Science.gov (United States)

    Yu, Wei

    2013-01-01

    This dissertation applied the quantitative approach to the data gathered from online survey questionnaires regarding the three objects: Information Technology (IT) Portfolio Management, IT-Business Alignment, and IT Project Deliverables. By studying this data, this dissertation uncovered the underlying relationships that exist between the…

  11. Technology utilization in a non-urban region: Further impact and technique of the Technology Use Studies Center

    Science.gov (United States)

    1976-01-01

    Updated information is given pertaining to Technology Use Studies Center (TUSC) clients who are those that receive/use information as disseminated by the center. The client information is presented as a continuation of client data as set forth in the center's previous annual report.

  12. Technology installation review. A case study on energy-efficient technologies

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, Van [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2001-12-31

    The purpose of this Technology Installation Review is to provide an overview of hybrid geothermal heat pump systems. It presents the results of recent research on these systems, looks at system types, energy savings, maintenance considerations, and measured technology performance from several examples. Using the ground as a thermal energy source and/or a heat sink for heat pumps has long been recognized to have a number of advantages over the similar use of ambient air. Ground temperatures at about 3-ft depth or lower are much less variable than ambient air temperatures. Further, soil or rock at these depths is usually warmer than ambient air during the coldest winter months and cooler than ambient air during the summer months. This fact leads directly to cooler condensation temperatures (during cooling operation) and warmer evaporating temperatures (during heating) for a heat pump with consequent improved energy efficiency. It also results in increased heating and cooling capacity at extreme temperatures, thereby reducing or eliminating the need for auxiliary heat.

  13. Stratification of complexity in congenital heart surgery: comparative study of the Risk Adjustment for Congenital Heart Surgery (RACHS-1 method, Aristotle basic score and Society of Thoracic Surgeons-European Association for Cardio- Thoracic Surgery (STS-EACTS mortality score

    Directory of Open Access Journals (Sweden)

    Paulo Ernando Ferraz Cavalcanti

    2015-04-01

    Full Text Available AbstractObjective:To determine whether stratification of complexity models in congenital heart surgery (RACHS-1, Aristotle basic score and STS-EACTS mortality score fit to our center and determine the best method of discriminating hospital mortality.Methods:Surgical procedures in congenital heart diseases in patients under 18 years of age were allocated to the categories proposed by the stratification of complexity methods currently available. The outcome hospital mortality was calculated for each category from the three models. Statistical analysis was performed to verify whether the categories presented different mortalities. The discriminatory ability of the models was determined by calculating the area under the ROC curve and a comparison between the curves of the three models was performed.Results:360 patients were allocated according to the three methods. There was a statistically significant difference between the mortality categories: RACHS-1 (1 - 1.3%, (2 - 11.4%, (3-27.3%, (4 - 50 %, (P<0.001; Aristotle basic score (1 - 1.1%, (2 - 12.2%, (3 - 34%, (4 - 64.7%, (P<0.001; and STS-EACTS mortality score (1 - 5.5 %, (2 - 13.6%, (3 - 18.7%, (4 - 35.8%, (P<0.001. The three models had similar accuracy by calculating the area under the ROC curve: RACHS-1- 0.738; STS-EACTS-0.739; Aristotle- 0.766.Conclusion:The three models of stratification of complexity currently available in the literature are useful with different mortalities between the proposed categories with similar discriminatory capacity for hospital mortality.

  14. Technology utilization in a non-urban region: Further impact and technique of the Technology Use Studies Center, 2

    Science.gov (United States)

    Gold, H. C. (Editor); Moore, A. M.; Dodd, B.; Dittmar, V.

    1971-01-01

    The clientele served by the Technology Use Studies Center (TUSC) is updated. Manufacturing leads the list of client firms. The standard industrial classification (SIC) range of these firms is broad. Substantial numbers of college and university faculties are using TUSC services. Field operations inherent in the functions of dissemination and assistance are reviewed. Increasing emphasis among clientele is on environmental concerns and management. A record is provided of the institutions contacted and the extent of TUSC involvement with them, as well as TUSC's cooperation with agencies and organizations. The impact of TUSC and the NASA-sponsored Technology Utilization Program on other public agencies is discussed.

  15. Connecting Critical Theory of Technology to Educational Studies

    Science.gov (United States)

    Kruger-Ross, Matthew James

    2013-01-01

    In this article, I explore how transformative learning theory, an approach to educating drawn from adult education, can be used to provide access to the critical theory of technology for educators. Rather than focusing primarily on K-12 teachers and educational systems or higher education and other postsecondary instruction, I connect learning as…

  16. Voice Assessment of Student Work: Recent Studies and Emerging Technologies

    Science.gov (United States)

    Eckhouse, Barry; Carroll, Rebecca

    2013-01-01

    Although relatively little attention has been given to the voice assessment of student work, at least when compared with more traditional forms of text-based review, the attention it has received strongly points to a promising form of review that has been hampered by the limits of an emerging technology. A fresh review of voice assessment in light…

  17. Information and Communications Technology Industry. Industry Study, Spring 2008

    Science.gov (United States)

    2008-01-01

    as will decisions made in international bodies regarding technical standards, anti-trust, and critical information infrastructure protection ( CIIP ...network security, Critical Information Infrastructure Protection ( CIIP ) and online privacy. Much is made of the computer industry’s birth in hobbyists...myriad of information security, CIIP , and privacy challenges created by the new technology. By recognizing the public good aspect of network security

  18. Handling Missing Data in Research Studies of Instructional Technology.

    Science.gov (United States)

    Oh, Jeong-Eun

    Missing data is an important issue that is discussed across many fields. In order to understand the issues caused by missing data, this paper reviews the types of missing data and problems caused by missing data. Also, to understand how missing data are handled in instructional technology research, articles published in "Educational Media…

  19. Connecting Critical Theory of Technology to Educational Studies

    Science.gov (United States)

    Kruger-Ross, Matthew James

    2013-01-01

    In this article, I explore how transformative learning theory, an approach to educating drawn from adult education, can be used to provide access to the critical theory of technology for educators. Rather than focusing primarily on K-12 teachers and educational systems or higher education and other postsecondary instruction, I connect learning as…

  20. Future of health technology assessment studies in gene and cell ...

    African Journals Online (AJOL)

    SERVER

    2007-07-18

    Jul 18, 2007 ... The application of new knowledge and technological change is a key driver of the achievements in policy decisions in health ... extension of human life, reduction of pain, disease risk .... of uncertainty, (ii) the transferring of results of evaluations between .... up R&D companies are benefitting especially at the.

  1. Science and technology awareness for preschool children: A case study

    CSIR Research Space (South Africa)

    Van Deventer, A

    2008-11-01

    Full Text Available not loose the opportunity to have a positive influence on the attitudes of people towards science and technology. The question that comes to mind is where and when to start? There is no clear answer to these questions, but what is obvious is that we cannot...

  2. Experts call for increasing support to superconducting technology studies

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ The Chinese government should launch a major research project on superconducting technology, as it is of significant importance for ensuring national energy security, raising energy efficiency and reducing emissions, urged experts at a workshop held at the CAS Institute of Electronic Engineering on 6 and 7 March in Beijing.

  3. Art and technology: A comparative study of policy legitimation

    NARCIS (Netherlands)

    N.M. Wijnberg (Nachoem)

    1994-01-01

    textabstractThe legitimation of technology policy is discussed from the point of view of the neoclassical and of the dynamic, Schumpeterian, approach. The results are presented, using the traditional categories of policy legitimation in welfare theory: public goods, externalities, and merit goods. A

  4. Technological study of oxygen aided laser cutting silicon steel

    Science.gov (United States)

    Hong, Lei; Mi, Chenglong; Wu, Gang

    2008-03-01

    It is easy to produce molten dross by using traditional laser cutting technology in laser cutting silicon steel sheet. The main reason is that oxidizing reaction will take place inevitably by using oxygen as aided gas, so high pressure and high purity N II or inert gases is used as aided cutting gas in laser cutting process. Although the cut quality is improved, the cutting efficiency is dropped because of the lack of energy resulting from an exothermic oxidation reaction. A fire new laser cutting technology by using an additional nozzle put under the workpiece that will form lateral gas flow to control the direction of the flowing dross gas is raised. In this technology oxygen is still used as aided gas, the laser power is reduced and the cut is fine. The experiments prove that by controlling the technical parameter reasonably, glossy and dross-free cutting kerfs are obtained. The gas flow acting under the workpiece is simulated by Finite Element Method (FEM). The varieties of pneumatic fields when the additional nozzle is in different degree and flow velocity are analyzed, which provides academic basis for controlling the flowing direction of the dross gas more reasonably. This laser cutting technology is practical and feasible.

  5. [Study on modern processing technologies of aconiti kusnezoffii radix].

    Science.gov (United States)

    Lin, Hua; Deng, Guang-hai; Gong, You-ming

    2014-07-01

    To compare different processing technologies of Aconiti Kusnezoffii Radix, and to optimize a kind of "low toxicity and high efficiency", simple and practical processing technology for Aconiti Kusnezoffii Radix. HPLC method was used to determine the content of six kinds of alkaloids, and titration method to determine the content of total alkaloids. These contents combined with production were used to evaluate the modern processing technologies of Aconiti Kusnezoffii Radix. There was serious drain of Aconitum alkaloids after treated by soaking, and the loss rates of the content of monoester alkaloids, diester alkaloids and total alkaloid were 20.97%, 31.13% and 14.57%, respectively. The content of alkaloids could maximize the retention using wetting method, the best methods for reducing poison were atmospheric pressure and high pressure steaming cooking methods, and its total diester alkaloids content was too low to be detected, the contents of alkaloids in samples of two kinds of high-temperature baking were 0.6903 mg/g and 0.5575 mg/g, which were higher than the requirement of Chinese Pharmacopoeia. The content of monoester alkaloids was 0.6336 - 2.2721 mg/g of 10 kinds of processing technologies, between which there were nine kinds of processing technologies beyong the Chinese Pharmacopoeia requirement of 0.7 mg/g, while the total alkaloids content was 7.8019 - 11.2078 mg/g. The best method for reducing poison is high-pressure steaming, whose content of diester alkaloids can reach the Chinese Pharmacopoeia requirement after treatment of wet autoclaved products, with higher content of total alkaloids. It is simple, controllable, and suitable for processing of Aconiti Kusnezoffii Radix.

  6. Study on the petroleum recovery technology : Analysis of pipeline flow

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Se Joon; Kim, Hyun Tae; Kim, In Kee; Huh, Dae Gee [Korea Institute of Geology Mining and Materials, Taejon (Korea)

    1998-12-01

    The petroleum exploration activities have been performed by our own technology in the concession Block VI-I in Korean continental shelf for more than 10 years. Gas and gas condensate were discovered from several exploratory wells drilled in this block. This year, the news of another hit in the well of Gorae-V was very encouraging. Different from the previous gas discoveries, the reservoir properties and the productivity of Gorea-V well were excellent and the reserve estimate was very optimistic for the gas field development in this region. Gas consumption was very rapidly increased during recent years because of the image of cleaner fuel compared with other fossil fuels and convenience of usage. Korea is the fifth country in the world in terms of total quantity of petroleum consumption. This is the reason why the secure supply of oil and gas in the future is vital to our industry. The development of gas or gas condensate reservoir is different from that of oil reservoir. Especially sales contract must be made before the initiation of gas field exploitation. The production facilities including pipeline system must be selected and designed for further consideration. In this study, we have selected the 'K' offshore gas field where the water depth is 155 m and the distance from the shore is 50 km. The main purpose of this production system analysis is to select the optimum size and capacity of production facilities including pipeline in order to find the most appropriate production schedule. Production system analysis using nodal analysis includes deliverability calculation of the reservoir, production system optimization, recoverable reserve estimation, and performance forecast of the reservoir with three different production rate scenarios. The reservoir pressure is 4525 psia and the temperature is 248 deg.F. The OGIP of this reservoir was calculated as 24.64 BCF/well and the reservoir is expected to produce for up to 10 years. The porosity is 6% and the

  7. Information Technology and Community Restoration Studies/Task 1: Information Technology

    Energy Technology Data Exchange (ETDEWEB)

    Upton, Jaki F.; Lesperance, Ann M.; Stein, Steven L.

    2009-11-19

    Executive Summary The Interagency Biological Restoration Demonstration—a program jointly funded by the Department of Defense's Defense Threat Reduction Agency and the Department of Homeland Security's (DHS's) Science and Technology Directorate—is developing policies, methods, plans, and applied technologies to restore large urban areas, critical infrastructures, and Department of Defense installations following the intentional release of a biological agent (anthrax) by terrorists. There is a perception that there should be a common system that can share information both vertically and horizontally amongst participating organizations as well as support analyses. A key question is: "How far away from this are we?" As part of this program, Pacific Northwest National Laboratory conducted research to identify the current information technology tools that would be used by organizations in the greater Seattle urban area in such a scenario, to define criteria for use in evaluating information technology tools, and to identify current gaps. Researchers interviewed 28 individuals representing 25 agencies in civilian and military organizations to identify the tools they currently use to capture data needed to support operations and decision making. The organizations can be grouped into five broad categories: defense (Department of Defense), environmental/ecological (Environmental Protection Agency/Ecology), public health and medical services, emergency management, and critical infrastructure. The types of information that would be communicated in a biological terrorism incident include critical infrastructure and resource status, safety and protection information, laboratory test results, and general emergency information. The most commonly used tools are WebEOC (web-enabled crisis information management systems with real-time information sharing), mass notification software, resource tracking software, and NW WARN (web-based information to protect critical

  8. Initial technology assessment for the Large-Aperture UV-Optical-Infrared (LUVOIR) mission concept study

    Science.gov (United States)

    Bolcar, Matthew R.; Feinberg, Lee; France, Kevin; Rauscher, Bernard J.; Redding, David; Schiminovich, David

    2016-07-01

    The NASA Astrophysics Division's 30-Year Roadmap prioritized a future large-aperture space telescope operating in the ultra-violet/optical/infrared wavelength regime. The Association of Universities for Research in Astronomy envisioned a similar observatory, the High Definition Space Telescope. And a multi-institution group also studied the Advanced Technology Large Aperture Space Telescope. In all three cases, a broad science case is outlined, combining general astrophysics with the search for biosignatures via direct-imaging and spectroscopic characterization of habitable exoplanets. We present an initial technology assessment that enables such an observatory that is currently being studied for the 2020 Decadal Survey by the Large UV/Optical/Infrared (LUVOIR) surveyor Science and Technology Definition Team. We present here the technology prioritization for the 2016 technology cycle and define the required technology capabilities and current state-of-the-art performance. Current, planned, and recommended technology development efforts are also reported.

  9. Initial Technology Assessment for the Large-Aperture UV-Optical-Infrared (LUVOIR) Mission Concept Study

    Science.gov (United States)

    Bolcar, Matthew R.; Feinberg, Lee; France, Kevin; Rauscher, Bernard J.; Redding, David; Schiminovich, David

    2016-01-01

    The NASA Astrophysics Division's 30-Year Roadmap prioritized a future large-aperture space telescope operating in the ultra-violet/optical/infrared wavelength regime. The Association of Universities for Research in Astronomy envisioned a similar observatory, the High Definition Space Telescope. And a multi-institution group also studied the Advanced Technology Large Aperture Space Telescope. In all three cases, a broad science case is outlined, combining general astrophysics with the search for biosignatures via direct-imaging and spectroscopic characterization of habitable exoplanets. We present an initial technology assessment that enables such an observatory that is currently being studied for the 2020 Decadal Survey by the Large UV/Optical/Infrared (LUVOIR) surveyor Science and Technology Definition Team. We present here the technology prioritization for the 2016 technology cycle and define the required technology capabilities and current state-of-the-art performance. Current, planned, and recommended technology development efforts are also reported.

  10. Initial Technology Assessment for the Large UV-Optical-Infrared (LUVOIR) Mission Concept Study

    Science.gov (United States)

    Bolcar, Matthew R.; Feinberg, Lee D.; France, Kevin; Rauscher, Bernard J.; Redding, David; Schiminovich, David

    2016-01-01

    The NASA Astrophysics Divisions 30-Year Roadmap prioritized a future large-aperture space telescope operating in the ultra-violet-optical-infrared wavelength regime. The Association of Universities for Research in Astronomy envisioned a similar observatory, the High Definition Space Telescope. And a multi-institution group also studied the Advanced Technology Large Aperture Space Telescope. In all three cases, a broad science case is outlined, combining general astrophysics with the search for bio-signatures via direct-imaging and spectroscopic characterization of habitable exo-planets. We present an initial technology assessment that enables such an observatory that is currently being studied for the 2020 Decadal Survey by the Large UV-Optical Infrared (LUVOIR) surveyor Science and Technology Definition Team. We present here the technology prioritization for the 2016 technology cycle and define the required technology capabilities and current state-of-the-art performance. Current, planned, and recommended technology development efforts are also reported.

  11. The Current Status of Usability Studies of Information Technologies in China: A Systematic Study

    OpenAIRE

    Lei, Jianbo; Xu, Lufei; Meng, Qun; Zhang, Jiajie; Gong, Yang

    2014-01-01

    Objectives. To systematically review and analyze the current status and characteristics of usability studies in China in the field of information technology in general and in the field of healthcare in particular. Methods. We performed a quantitative literature analysis in three major Chinese academic databases and one English language database using Chinese search terms equivalent to the concept of usability. Results. Six hundred forty-seven publications were selected for analysis. We found ...

  12. Examining Technology Perception of Social Studies Teachers with Rogers' Diffusion Model

    Science.gov (United States)

    Akman, Özkan; Koçoglu, Erol

    2017-01-01

    Mobile learning has started to take place in education literature with the developing technology, and this technology started to have an increasing spread along with its advantages. This study examines the responses of social studies teachers to the innovations in the field of mobile learning. The study was designed within the framework of theory…

  13. Study of Near Field Communication Technology in University Scenarios

    Science.gov (United States)

    Ruiz, Irene Luque; Miraz, Guillermo Matas; Gómez-Nieto, Miguel Ángel

    2009-08-01

    In this paper we present an introduction to the possibilities of NFC (Near Field Communication) technology in the University environment. NFC is the key for the development of interactive systems where "intelligent" objects interact with the user just only by touching the objects with a NFC device. We support that a University environment with active objects dispatching information and services to the users (students and teachers) can introduce an appropriate environment for the fulfillment of the new Educational European directives. Here, we briefly describe some of the possibilities of the NFC technology and we include an example of the use of NFC through a Smart Poster for a scenario where a Department directory is considered.

  14. A longitudinal study of families with technology-dependent children.

    Science.gov (United States)

    Toly, Valerie Boebel; Musil, Carol M; Carl, John C

    2012-02-01

    Few researchers have longitudinally examined families caring for technology-dependent children at home. We tested a theoretically and empirically based conceptual model by examining family functioning and normalization in 82 mothers (female primary caregivers) twice over 12 months. Time 1 and Time 2 cross-sectional findings were consistent; the only predictor of family functioning was mothers' depressive symptoms. Contrary to the proposed model, normalization, caregiving duration, and home nursing hours were not directly related to family functioning. Baseline family functioning significantly predicted future family functioning. Also, mothers whose children were no longer technology-dependent at Time 2 reported significant improvements in family functioning and normalization. An intervention to address high levels of depressive symptoms of these mothers is essential to optimizing family functioning.

  15. Single-cell technologies in molecular marine studies

    KAUST Repository

    Kodzius, Rimantas

    2015-01-24

    Middle Eastern countries are experiencing a renaissance, with heavy investment in both in infrastructure and science. King Abdullah University of Science and Technology (KAUST) is a new and modern university in Saudi Arabia. At the Computational Bioscience Research Center (CBRC) we are working on exploring the Red Sea and beyond, collaborating with Japanese and other research centers. We are using the environment to collect and analyze the microorganisms present. The platform being established at CBRC allows to process samples in a pipeline. The pipeline components consist of sample collection, processing and sequencing, following the in silico analysis, determining the gene functions, identifying the organisms. The genomes of microorganisms of interest are targeted modified by genome editing technology such as CRISPR and desired properties are selected by single cell instrumentation. The final output is to identify valuable microorganisms with production of bio-energy, nutrients, the food and fine chemicals.

  16. Wearable technology to help with visual challenges - two case studies.

    Science.gov (United States)

    Kálmán, Viktor; Baczó, Csaba; Livadas, Makis; Csielka, Tamás

    2015-01-01

    Today as embedded computing technology and sensors become cheaper and smaller wearable technologies experience an unprecedented boom. This article presents two wearable systems that aim to help people with low vision and the blind in performing everyday tasks and doing sports. DIGIGLASSES is a project aimed at creating a pair of augmented reality digital glasses that present controlled light and contrast levels and marks selectable features on the field of vision to aid in everyday tasks. BLINDTRACK is guidance system that uses wireless localization and an innovative haptic feedback belt to guide blind runners along the running track. Both systems are briefly presented along with the most relevant technical details and user feedback where applicable. Both projects were funded by the EU FP7. Corresponding author V. Kalman: viktor.kalman@ateknea.com.

  17. FEASIBILITY STUDY OF PRESSURE PULSING PIPELINE UNPLUGGING TECHNOLOGIES FOR HANFORD

    Energy Technology Data Exchange (ETDEWEB)

    Servin, M. A. [Washington River Protection Solutions, LLC, Richland, WA (United States); Garfield, J. S. [AEM Consulting, LLC (United States); Golcar, G. R. [AEM Consulting, LLC (United States)

    2012-12-20

    The ability to unplug key waste transfer routes is generally essential for successful tank farms operations. All transfer lines run the risk of plugging but the cross site transfer line poses increased risk due to its longer length. The loss of a transfer route needed to support the waste feed delivery mission impacts the cost and schedule of the Hanford clean up mission. This report addresses the engineering feasibility for two pressure pulse technologies, which are similar in concept, for pipeline unplugging.

  18. Study on Risk of Enterprise' Technology Innovation Based on ISM

    Science.gov (United States)

    Li, Hongyan

    The risk in the process of enterprise' technology innovation is concluted five subsystems: environmental risk, market risk, enterprise capacity risk, project risk and project management risk, 16 risk factors under each subsystem are identified. A Interpretative Structural Modeling(ISM) of of risk factors is established, the relationship and influence levels of them is confirmed, the purpose is to help enterprise assessing risks and taking countermeasure to minimize the potential loss and increase the innovation income.

  19. USAF Advanced Terrestrial Energy Study. Volume 2. Technology Handbook.

    Science.gov (United States)

    1983-04-01

    volume of Stirling svstems hecause the regenerator determines the dimensions of the system envelone. Table 27. STIRLING SYSTEM VOLUME (CUBIC FEET...Rankine Cycles Batteries Gas Turbines Stirling Engines Thermal Energy Storage 20. ABSTRACT (Confilime 4n roere. olde If neo**WY 41011184100140 & Wee bi A...TECHNOLOGY DESCRIPTIONS 13 Diesels, 13 Gas Turbines. 31 Stirlings , 49 Organic Rankine Cycle; 67 Fuel Cells 83 Photovoltaic Energy Conversion System, 102 Wind

  20. Nonacid meat decontamination technologies: model studies and commercial applications.

    Science.gov (United States)

    Sofos, J N; Smith, G C

    1998-11-10

    Increased consumer awareness and concern about microbial foodborne diseases has resulted in intensified efforts to reduce contamination of raw meat, as evidenced by new meat and poultry inspection regulations being implemented in the United States. In addition to requiring operation of meat and poultry slaughtering and processing plants under the principles of the hazard analysis critical control point (HACCP) system, the new regulations have established microbiological testing criteria for Escherichia coli and Salmonella, as a means of evaluating plant performance. These developments have renewed and intensified interest in the development and commercial application of meat and poultry decontamination procedures. Technologies developed and evaluated for decontamination include live animal cleaning/washing, chemical dehairing, carcass knife-trimming to remove physical contaminants, steam/hot water-vacuuming for spot-cleaning/decontamination of carcasses, spray washing/rinsing of carcasses with water of low or high pressures and temperatures or chemical solutions, and exposure of carcass sides to pressurized steam. Under appropriate conditions, the technologies applied to carcasses may reduce mean microbiological counts by approximately one-three log colony forming units (cfu)/cm2, and some of them have been approved and are employed in commercial applications (i.e., steam-vacuuming; carcass spray-washing with water, chlorine, organic acid or trisodium phosphate solutions; hot water deluging/spraying/rinsing, and pressurized steam). The contribution of these decontamination technologies to the enhancement of food safety will be determined over the long term, as surveillance data on microbial foodborne illness are collected. This review examines carcass decontamination technologies, other than organic acids, with emphasis placed on recent advances and commercial applications.

  1. Material Identification Technology (MIT) concept technical feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Jones, J.L.; Harker, Y.D.; Yoon, W.Y.; Johnson, L.O.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) has initiated the design and development of a novel pulsed accelerator-based, active interrogation concept. The proposed concept, referred to as the Material Identification Technology (MIT), enables rapid (between accelerator pulses), non-destructive, elemental composition analysis of both nuclear and non-nuclear materials. Applications of this technique include material monitoring in support of counter-proliferation activities, such as export controls (at domestic and international inspection locations), SNM controls, nuclear weapon dismantlement, and chemical weapon verification. Material Identification Technology combines a pulsed, X-ray source (an electron accelerator) and a gamma detection system. The accelerator must maximize neutron production (pulse width, beam current, beam energy, and repetition rate) and minimize photon dose to the object. Current available accelerator technology can meet these requirements. The detection system must include detectors which provide adequate gamma energy resolution capability, rapid recovery after the initial X-ray interrogation pulse, and multiple single gamma event detection between accelerator pulses. Further research is required to develop the detection system. This report provides the initial feasibility assessment of the MIT concept.

  2. Global Positioning Systems (GPS) Technology to Study Vector-Pathogen-Host Interactions

    Science.gov (United States)

    2016-12-01

    Award Number: W81XWH-11-2-0175 TITLE: Global Positioning Systems ( GPS ) Technology to Study Vector-Pathogen-Host Interactions PRINCIPAL...Positioning Systems ( GPS ) Technology to Study Vector-Pathogen-Host Interactions 5b. GRANT NUMBER W81XWH-11-2-0175 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...sophisticated Global Positioning Systems ( GPS ) technology of isolated viruses and genetic characterization, spatial and temporal analysis are being

  3. Baseline Study Methodology for Future Phases of Research on Nuclear Power Plant Control Room Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Le Blanc, Katya Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bower, Gordon Ross [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hill, Rachael Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States); Spielman, Zachary Alexander [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rice, Brandon Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-07-01

    In order to provide a basis for industry adoption of advanced technologies, the Control Room Upgrades Benefits Research Project will investigate the benefits of including advanced technologies as part of control room modernization This report describes the background, methodology, and research plan for the first in a series of full-scale studies to test the effects of advanced technology in NPP control rooms. This study will test the effect of Advanced Overview Displays in the partner Utility’s control room simulator

  4. Music technology in music therapy - A study of the possibilities, potential and problems around the use of music technologies in music therapy with youths and adolescents

    OpenAIRE

    Misje, René

    2013-01-01

    Music technology in music therapy - A study of the possibilities, potential and problems around the use of music technologies in music therapy with youths and adolescents. This qualitative study explores the usefulness of music technology in music therapeutic practice with youth and adolescents. Four music therapist`s reflections on their use of music technologies and on the possibilities, potential and problems of this use are explored through semi-structured intervi...

  5. TRENDS AND ISSUES: A REVIEW OF STUDIES RELATED TO TECHNOLOGY USAGE IN EARLY CHILDHOOD EDUCATION

    Directory of Open Access Journals (Sweden)

    Elif ÖZTÜRK YILMAZTEKİN

    2013-06-01

    Full Text Available This paper describes types of technology studies that have been conducted related to young children’s early education. A systematic review of studies was undertaken using EBSCOhost, Blackwell Synergy, and ScienceDirect databases, to identify all studies published between 2003 and 2009 according to specific criteria. The studies were selected on the basis of the following three issues: (1 the role of technology in children’s development, (2 the role of technology in teachers’ teaching practices, and (3 studies that aimed to investigate the impact of technology usage on not only teacher practices but also young children’s development in school settings. In for each type of study the methodology, types of technology used, purposes and findings and other features including the publication year, and study locations are given in detail.

  6. The development of an alternative in-service programme for Korean science teachers with an emphasis on science-technology-society

    Science.gov (United States)

    Cho, Jungil

    2002-10-01

    This study looks at the effects of a science-technology-society (STS) in-service programme, designed to change teachers' awareness and practice of STS/constructivist approaches, while also focusing on students' understandings and changes of perceptions of the constructivist learning environments. The STS in-service programme was developed to achieve the following features: teacher-oriented, teaching in a social context, emphasis on a 'constructivist' approach, developing STS units and their use in classrooms. A total of 20 middle and high school science teachers participated in the in-service programme in 1998; and three of the middle school teachers were selected to gain information from their implementation of a Reactions of Acids and Bases unit in their respective classrooms. The Science Education Reform Inventory was administered to all the teachers at both the opening and the end of the programme. One hundred twenty-five students of the three teachers experienced about 16 class hours of lessons comprising the new STS unit. At the beginning and the end of the unit, they completed the Constructivist Learning Environment Survey. In order to assess student understanding, teachers administered the creativity test before and after the unit; and the concept acquisition test and the application test after the unit. Students obtained at average 48% of the 35 key concepts and 6.6 additional non-key concepts after the unit was finished. Students made more relevant and creative responses on unfamiliar situations on the post-test than on the pre-test. Through several tasks including a short essay, students showed their abilities to apply various concepts related to acids and bases to daily life situation. It was found that the STS programme improved the teachers' awareness and practices of the science education reforms characterized by STS and constructivism. The middle school science teachers could develop STS units which they implemented in their own classrooms. They

  7. A Trend Study: Technology Adoption in the Teaching-Learning Process by Secondary Agriscience Teachers--2002 and 2007

    Science.gov (United States)

    Kotrlik, Joe W.; Redmann, Donna H.

    2009-01-01

    This study was designed to determine agriscience teachers' adoption of technology for use in instruction and to determine if their technology adoption and perceived barriers to technology adoption had changed since the 2002 benchmark study. This study was part of a larger study of technology adoption by secondary career and technical education…

  8. The Population Ecology of Technology: An Empirical Study of US Biotechnology Patents from 1976 to 2003.

    Science.gov (United States)

    van den Oord, Ad; van Witteloostuijn, Arjen

    2017-01-01

    A detailed understanding of technological change as an evolutionary process is currently not well understood. To increase our understanding, we build upon theory from organizational ecology to develop a model of endogenous technological growth and determine to what extent the pattern of technological growth can be attributed to the structural or systemic characteristics of the technology itself. Through an empirical investigation of patent data in the biotechnology industry from 1976 to 2003, we find that a technology's internal (i.e., density and diversity) ecological characteristics have a positive effect on its growth rate. The niche's external characteristics of crowding and status have a negative effect on its growth rate. Hence, applying theory from organizational ecology increases our understanding of technological change as an evolutionary process. We discuss the implications of our findings for the study of technological growth and evolution, and suggest avenues for further research.

  9. Studying Impact of Organizational Factors in Information Technology Acceptance in Accounting Occupation by Use of TAM Model (Iranian Case Study)

    OpenAIRE

    Akbar Allahyari; Morteza Ramazani

    2012-01-01

    Nowadays, information technology attitudes as the beneficial part of industry, economic and culture. Accounting posits as profession that provide information for decision- making of users and in the complex world, organizations must use information technology to present information for users in time. This research is by purpose of studying impact of organizational factors in information technology acceptance by use of TAM model in study descriptive-surveying method that researcher has used to...

  10. Technology study of Gunite tank sludge mobilization at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    DeVore, J.R.; Herrick, T.J.; Lott, K.E.

    1994-12-01

    The Oak Ridge National Laboratory (ORNL) Gunite Tank Sludge Mobilization Technology Study was initiated to support the Gunite Tank Treatability Study effort. The technology study surveyed the methods and technologies available for tank cleaning and sludge mobilization in a radioactive environment. Technologies were identified and considered for applicability to the Gunite and Associated Tanks (GAAT) problems. These were then either accepted for further study or rejected as not applicable. Technologies deemed applicable to the GAAT sludge removal project were grouped for evaluation according to (1) deployment method, (2) types of remotely operated end effector equipment applicable to removal of sludge, (3) methods for removing wastes from the tanks, and (4) methods for concrete removal. There were three major groups of deployment technologies: ``past practice`` technologies, mechanical arm-based technologies, and vehicle-based technologies. The different technologies were then combined into logical sequences of deployment platform, problem, end effector, conveyance, post-removal treatment required (if any), and disposition of the waste. Many waste removal options are available, but the best technology in one set of circumstances at one site might not be the best type to use at a different site. No single technology is capable of treating the entire spectrum of wastes that will be encountered in GAAT. None of the systems used in other industries appears to be suitable, primarily because of the nature of the sludges in the GAAT Operable Unit (OU), their radiation levels, and tank geometries. Other commercial technologies were investigated but rejected because the authors did not believe them to be applicable.

  11. STS-61 Space Shuttle mission report

    Science.gov (United States)

    Fricke, Robert W., Jr.

    1994-02-01

    The STS-61 Space Shuttle Program Mission Report summarizes the Hubble Space Telescope (HST) servicing mission as well as the Orbiter, External Tank (ET), Solid Rocket Booster (SRB), Redesigned Solid Rocket Motor (RSRM), and the Space Shuttle main engine (SSME) systems performance during the fifty-ninth flight of the Space Shuttle Program and fifth flight of the Orbiter vehicle Endeavour (OV-105). In addition to the Orbiter, the flight vehicle consisted of an ET designated as ET-60; three SSME's which were designated as serial numbers 2019, 2033, and 2017 in positions 1, 2, and 3, respectively; and two SRB's which were designated BI-063. The RSRM's that were installed in each SRB were designated as 360L023A (lightweight) for the left SRB, and 360L023B (lightweight) for the right SRB. This STS-61 Space Shuttle Program Mission Report fulfills the Space Shuttle Program requirement as documented in NSTS 07700, Volume 8, Appendix E. That document requires that each major organizational element supporting the Program report the results of its hardware evaluation and mission performance plus identify all related in-flight anomalies. The primary objective of the STS-61 mission was to perform the first on-orbit servicing of the Hubble Space Telescope. The servicing tasks included the installation of new solar arrays, replacement of the Wide Field/Planetary Camera I (WF/PC I) with WF/PC II, replacement of the High Speed Photometer (HSP) with the Corrective Optics Space Telescope Axial Replacement (COSTAR), replacement of rate sensing units (RSU's) and electronic control units (ECU's), installation of new magnetic sensing systems and fuse plugs, and the repair of the Goddard High Resolution Spectrometer (GHRS). Secondary objectives were to perform the requirements of the IMAX Cargo Bay Camera (ICBC), the IMAX Camera, and the Air Force Maui Optical Site (AMOS) Calibration Test.

  12. STS-112 Commander Ashby during post landing news conference

    Science.gov (United States)

    2002-01-01

    KENNEDY SPACE CENTER, FLA. - STS-112 Commander Jeffrey Ashby is shown during the crew's post-landing briefing for the media. Mission STS-112 was the 15th assembly flight to the International Space Station, installing the S1 truss. The landing was the 60th at KSC in the history of the Shuttle program.

  13. Application of 3D printing technology in aerodynamic study

    Science.gov (United States)

    Olasek, K.; Wiklak, P.

    2014-08-01

    3D printing, as an additive process, offers much more than traditional machining techniques in terms of achievable complexity of a model shape. That fact was a motivation to adapt discussed technology as a method for creating objects purposed for aerodynamic testing. The following paper provides an overview of various 3D printing techniques. Four models of a standard NACA0018 aerofoil were manufactured in different materials and methods: MultiJet Modelling (MJM), Selective Laser Sintering (SLS) and Fused Deposition Modeling (FDM). Various parameters of the models have been included in the analysis: surface roughness, strength, details quality, surface imperfections and irregularities as well as thermal properties.

  14. The Study on Educational Technology Abilities Evaluation Method

    Science.gov (United States)

    Jing, Duan

    The traditional methods used to evaluate the test, the test did not really measure that we want to measuring things. Test results and can not serve as a basis for evaluation, so it was worth the natural result of its evaluation of weighing. This system is full use of technical means of education, based on education, psychological theory, to evaluate the object-based, evaluation tools, evaluation of secondary teachers to primary and secondary school teachers in educational technology as the goal, using a variety of evaluation of side France, from various angles established an informal evaluation system.

  15. Cogeneration technology alternatives study. Volume 2: Industrial process characteristics

    Science.gov (United States)

    1980-01-01

    Information and data for 26 industrial processes are presented. The following information is given for each process: (1) a description of the process including the annual energy consumption and product production and plant capacity; (2) the energy requirements of the process for each unit of production and the detailed data concerning electrical energy requirements and also hot water, steam, and direct fired thermal requirements; (3) anticipated trends affecting energy requirements with new process or production technologies; and (4) representative plant data including capacity and projected requirements through the year 2000.

  16. Transgenic technologies for the study of epididymal function

    Institute of Scientific and Technical Information of China (English)

    R.JohnLye; BarryT.Hinton

    2000-01-01

    Sperm mature and acquire the capacity for fertilization during their transit through the epididymis, however little is known of the molecular events that comprise sperm maturation. Recent advances in transgenic mouse technology hold promise for illumination of this process. Most of the existing infertile, transgenic mouse lines seem to have defects in epithelial structure or sperm transport rather than direct defects in the maturation of sperm. Temporally and spatially restricted targeted disruptions of epididymal specific genes should provide great insight into the epididymal contribution to sperm mattwation. ( Asian J Androl 2000; 2 : 33 - 38 )

  17. Study on Technology and Properties of Brush Plating Coatings

    Institute of Scientific and Technical Information of China (English)

    DI Ping

    2004-01-01

    A new brush plating process with a soluble anode of nickel was introduced. TDY112 brush plating solution was used on the No.20 carbon steel substrate. It has the higher deposit velocity, better properties and lower cost. Scanning electronic microscopy(SEM), optical microscope, microhardness test and wear test were adopted to detect the surface quality and the properties of the coating, such as micrograph, microstructure, micro-hardness wear resistance and adherence between the coating and the substrate. The experimental results showed that the suitable technological parameters to be used, the coatings had better the surface quality, higher hardness and wear resistance.

  18. STS-129 shuttle crew visits Stennis

    Science.gov (United States)

    2010-01-01

    Members of the STS-129 space shuttle crew visited NASA's John C. Stennis Space Center on Jan. 19 to share details of their November visit to the International Space Station. During their 11-day mission aboard shuttle Atlantis, crew members delivered equipment, supplies and spare parts to the ISS. Following their mission report, astronauts visited with Stennis employees during a brief reception. Astronauts visiting Stennis were Pilot Barry Wilmore, Mission Specialist Randy Bresnik, Commander Charles Hobaugh and Mission Specialists Mike Foreman and Robert Satcher.

  19. STS-29 Landing Approach at Edwards

    Science.gov (United States)

    1989-01-01

    The STS-29 Space Shuttle Discovery mission approaches for a landing at NASA's then Ames-Dryden Flight Research Facility, Edwards AFB, California, early Saturday morning, 18 March 1989. Touchdown was at 6:35:49 a.m. PST and wheel stop was at 6:36:40 a.m. on runway 22. Controllers chose the concrete runway for the landing in order to make tests of braking and nosewheel steering. The STS-29 mission was very successful, completing the launch a Tracking and Data Relay communications satellite, as well as a range of scientific experiments. Discovery's five man crew was led by Commander Michael L. Coats, and included pilot John E. Blaha and mission specialists James P. Bagian, Robert C. Springer, and James F. Buchli. Space Shuttles are the main element of America's Space Transportation System and are used for space research and other space applications. The shuttles are the first vehicles capable of being launched into space and returning to Earth on a routine basis. Space Shuttles are used as orbiting laboratories in which scientists and mission specialists conduct a wide variety of scientific experiments. Crews aboard shuttles place satellites in orbit, rendezvous with satellites to carry out repair missions and return them to space, and retrieve satellites and return them to Earth for refurbishment and reuse. Space Shuttles are true aerospace vehicles. They leave Earth and its atmosphere under rocket power provided by three liquid-propellant main engines with two solid-propellant boosters attached plus an external liquid-fuel tank. After their orbital missions, they streak back through the atmosphere and land like airplanes. The returning shuttles, however, land like gliders, without power and on runways. Other rockets can place heavy payloads into orbit, but, they can only be used once. Space Shuttles are designed to be continually reused. When Space Shuttles are used to transport complete scientific laboratories into space, the laboratories remain inside the payload

  20. Influence of Transformational Leadership Style on Decision-Making Style and Technology Readiness: A Correlation Study

    Science.gov (United States)

    Mueller, Crystal A.

    2009-01-01

    The research addressed the problem of technology initiatives failing to meet organizational objectives. The purpose of the quantitative correlation study was to determine the relationship between transformational leadership styles, decision-making styles, and technology readiness. The findings of the study answered research questions in three…

  1. Organizational Influences in Technology Adoption Decisions: A Case Study of Digital Libraries

    Science.gov (United States)

    Oguz, Fatih

    2016-01-01

    The purpose of this study was to understand the organizational level decision factors in technology adoption in the context of digital libraries. A qualitative case study approach was used to investigate the adoption of a specific technology, XML-based Web services, in digital libraries. Rogers' diffusion of innovations and Wenger's communities of…

  2. Chemical Science and Technology I. A Study Guide of the Science and Engineering Technician Curriculum.

    Science.gov (United States)

    Ballinger, Jack T.; Wolf, Lawrence J.

    This study guide is part of an interdisciplinary program of studies entitled the Science and Engineering Technician (SET) Curriculum. This curriculum integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology with the objective of training technicians in the use of electronic…

  3. A Delphi Study on Technology Enhanced Learning (TEL) Applied on Computer Science (CS) Skills

    Science.gov (United States)

    Porta, Marcela; Mas-Machuca, Marta; Martinez-Costa, Carme; Maillet, Katherine

    2012-01-01

    Technology Enhanced Learning (TEL) is a new pedagogical domain aiming to study the usage of information and communication technologies to support teaching and learning. The following study investigated how this domain is used to increase technical skills in Computer Science (CS). A Delphi method was applied, using three-rounds of online survey…

  4. Teaching via Mobile Phone: A Case Study on Malaysian Teachers' Technology Acceptance and Readiness

    Science.gov (United States)

    Ismail, Issham; Bokhare, Siti F.; Azizan, Siti N.; Azman, Nizuwan

    2013-01-01

    The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers' acceptance of technology could influence their readiness for the pedagogical use…

  5. An Exploratory Study on K-12 Teachers' Use of Technology and Multimedia in the Classroom

    Science.gov (United States)

    Martin, Florence; Carr, Marsha L.

    2015-01-01

    21st century has seen new technology and multimedia made available for integration in K-12 classrooms. This exploratory study examines K-12 teachers' use of technology and multimedia in the classroom in two southern counties in the Southeastern United States. The purpose of the study was to answer the following five research questions: 1) What…

  6. Organizational Influences in Technology Adoption Decisions: A Case Study of Digital Libraries

    Science.gov (United States)

    Oguz, Fatih

    2016-01-01

    The purpose of this study was to understand the organizational level decision factors in technology adoption in the context of digital libraries. A qualitative case study approach was used to investigate the adoption of a specific technology, XML-based Web services, in digital libraries. Rogers' diffusion of innovations and Wenger's communities of…

  7. An Exploratory Study on K-12 Teachers' Use of Technology and Multimedia in the Classroom

    Science.gov (United States)

    Martin, Florence; Carr, Marsha L.

    2015-01-01

    21st century has seen new technology and multimedia made available for integration in K-12 classrooms. This exploratory study examines K-12 teachers' use of technology and multimedia in the classroom in two southern counties in the Southeastern United States. The purpose of the study was to answer the following five research questions: 1) What…

  8. A Phenomenographic Study of Greek Primary School Students' Representations Concerning Technology in Daily Life

    Science.gov (United States)

    Solomonidou, Christina; Tassios, Athanassios

    2007-01-01

    The present research investigated and studied students' representations about daily life technologies, in a prospect of studying technology in Greek primary education. In the research participated 60 Greek primary school students aged 9 to 12 years old. Research data were collected through semi-structured, personal, clinical-type interviews. Each…

  9. Predicting Acceptance of Mobile Technology for Aiding Student-Lecturer Interactions: An Empirical Study

    Science.gov (United States)

    Gan, Chin Lay; Balakrishnan, Vimala

    2017-01-01

    The current study sets out to identify determinants affecting tertiary students' behavioural intentions to use mobile technology in lectures. The study emphasises that the reason for using mobile technology in classrooms with large numbers of students is to facilitate interactions among students and lecturers. The proposed conceptual framework has…

  10. Basic research for nuclear energy. y Study on the nuclear materials technology

    Energy Technology Data Exchange (ETDEWEB)

    Kuk, I. H.; Lee, H. S.; Jeong, Y. H.; Sung, K. W.; Han, J. H.; Lee, J. T.; Lee, H. K.; Kim, S. J.; Kang, H. S.; An, D. H.; Kim, K. R.; Park, S. D.; Han, C. H.; Jung, M. K.; Oh, Y. J.; Kim, K. H.; Kim, S. H.; Back, J. H.; Kim, C. H.; Lim, K. S.; Kim, Y. Y.; Na, J. W.; Ku, J. H.; Lee, D. H.

    1996-12-01

    A study on the nuclear materials technologies which are necessary to establish the base for alloy development was performed. - The feasibility study on the application of Zircaloy scrap waste for hydrogen storage - The development of metal hydride battery for energy storage system - The establishment of transmission electron microscopy database for nuclear materials - The basic technology for the development of cladding materials for high burnup - The water chemistry technology for secondary system pH control and the photocatalysis technology for decomposition and removal of organics. - Improvement of primary component integrity of PWR by Zinc injection. (author). 175 refs., 58 tabs., 262 figs.

  11. The dynamic effects of technological and non technological shocks in the energy sector: a case study for Italy

    OpenAIRE

    Giuseppe Travaglini

    2010-01-01

    In this paper we address the question whether fiscal incentives and regulation are the most appropriate tools to increase productivity in energy sector. Doubts exist about whether these are the most effective tools for improving productivity since changes in productivity are usually related to changes in technological progress. We use a vector autoregressive model to study this problem. Our purpose is to identify the shocks which induce movements in productivity, and to measure the productivi...

  12. Atmospheric Environment for Space Shuttle (STS-28) Launch

    Science.gov (United States)

    Jasper, G. L.; Batts, G. W.

    1990-01-01

    A summary is presented of selected atmospheric conditions observed near Space Shuttle STS-28 launch time on August 8, 1989. STS-28 carried a Department of Defense payload and the flight azimuth is denoted by a reference flight azimuth, since the actual flight azimuth is not known. Values of ambient pressure, temperature, moisture, ground winds, visual observations (cloud), and winds aloft are included. The sequence of prelaunch Jimsphere-measured vertical wind profiles is given. The final atmospheric tape, which consists of wind and thermodynamic parameters versus altitude, for STS-28 vehicle ascent was constructed and represents the best estimate of the launch environment to 400,000 ft altitude that was traversed by the STS-28 vehicle. The STS-28 ascent atmospheric data tape was constructed by Marshall Space Flight Center's Earth Science and Applications Division to provide an internally consistent data set for use in post-flight performance assessments.

  13. Atmospheric environment for space shuttle (STS-36) launch

    Science.gov (United States)

    Jasper, G. L.; Batts, G. W.

    1990-01-01

    A summary of selected atmospheric conditions observed near space shuttle STS-36 launch time on February 28, 1990, at Kennedy Space Center, Florida was presented. STS-36 carried a Department of Defense payload and the flight azimuth is not known. Values of ambient pressure, temperature, moisture, ground winds, visual observations (cloud), and winds aloft are included. The sequence of pre-launch Jimsphere-measured vertical wind profiles is given. The final atmospheric tape, which consists of wind and thermodynamic parameters versus altitude, for STS-36 vehicle ascent was constructed. The STS-36 ascent atmospheric data tape was constructed to provide an internally consistent data set for use in postflight performance assessments and represent the best estimate of the launch environment to the 400,000 feet altitude that was traversed by the STS-36 vehicle.

  14. Atmospheric environment for space shuttle (STS-33) launch

    Science.gov (United States)

    Jasper, G. L.; Batts, G. W.

    1990-01-01

    A summary is presented of selected atmospheric conditions observed near space shuttle STS-33 at launch time. STS-33 carried a DOD payload and the flight azimuth is denoted by a reference flight azimuth, since the actual flight azimuth is not known. Values of ambient pressure, temperature, moisture, ground winds, visual observations (clouds), and winds aloft are included. The sequence of pre-launch Jimsphere measured vertical wind profiles is given. The final atmospheric tape, which consists of wind and thermodynamic parameters versus altitude, for STS-33 vehicle ascent, was constructed. The STS-33 ascent atmospheric data tape was constructed by NASA-Marshall to provide an internally consistent data set for use in postflight performance assessments and represents the best estimates of the launch environment to the 400,000 ft altitude that was traversed by the STS-33 vehicle.

  15. Atmospheric environment for space shuttle (STS-38) launch

    Science.gov (United States)

    Jasper, G. L.; Batts, G. W.

    1991-01-01

    A summary of selected atmospheric conditions observed near space shuttle STS-38 launch time on November 15, 1990, at Kennedy Space Center is presented. STS-38 carried a Department of Defense payload and the flight azimuth in this report will be denoted by a reference flight azimuth, since the actual flight azimuth is not known. Values of ambient pressure, temperature, moisture, ground winds, visual observation (cloud), and winds aloft are included. The sequence of prelaunch Jimsphere-measured vertical wind profiles is presented. The final atmospheric tape, which consists of wind and thermodynamic parameters versus altitude, for STS-38 vehicle ascent was constructed. The STS-38 ascent atmospheric data tape was constructed by Marshall Space Flight Center's Earth Science and Applications Division to provide an internally consistent data set for use in postflight performance assessments and represents the best estimate of the launch environment to the 400,000-ft altitude that was traversed by the STS-38 vehicle.

  16. Distance Education in Information Technology, a case study

    DEFF Research Database (Denmark)

    Helbo, Jan; Knudsen, Morten

    2002-01-01

    Project organized problem based learning is a successful concept for on-campus education at Aalborg University. The "Aalborg concept" has been used in networked distance education as well. This paper describes a project from the first year of our Master of Information Technology education organiz...... of project in group-organized distance education, are described and commented by three of the group members, and some possible solutions for more appropriate types of projects are listed......Project organized problem based learning is a successful concept for on-campus education at Aalborg University. The "Aalborg concept" has been used in networked distance education as well. This paper describes a project from the first year of our Master of Information Technology education organized...... with Internet-mediated project work. A group of 4 students carried out a project dependent on knowledge from two firms where two of the group members are working, making this a kind of Worked Based Learning (WBL). The project was formulated as a traditional on-campus type of project with the same complexity...

  17. Scoping Study of Airlift Circulation Technologies for Supplemental Mixing in Pulse Jet Mixed Vessels

    Energy Technology Data Exchange (ETDEWEB)

    Schonewill, Philip P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Berglin, Eric J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Boeringa, Gregory K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Buchmiller, William C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burns, Carolyn A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Minette, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-04-07

    At the request of the U.S. Department of Energy Office of River Protection, Pacific Northwest National Laboratory (PNNL) conducted a scoping study to investigate supplemental technologies for supplying vertical fluid motion and enhanced mixing in Waste Treatment and Immobilization Plant (WTP) vessels designed for high solids processing. The study assumed that the pulse jet mixers adequately mix and shear the bottom portion of a vessel. Given that, the primary function of a supplemental technology should be to provide mixing and shearing in the upper region of a vessel. The objective of the study was to recommend a mixing technology and configuration that could be implemented in the 8-ft test vessel located at Mid-Columbia Engineering (MCE). Several mixing technologies, primarily airlift circulator (ALC) systems, were evaluated in the study. This technical report contains a review of ALC technologies, a description of the PNNL testing and accompanying results, and recommended features of an ALC system for further study.

  18. Expanding the classroom with educational technology: A case study of a Cuban polytechnic high school

    Directory of Open Access Journals (Sweden)

    Anne Leftwich

    2014-12-01

    Full Text Available Polytechnic instruction has a common place in the Cuban education system (Gasperini, 2000. In polytechnic institutions, teachers leverage technological tools to prepare students for labor market competences. This case study examined a polytechnic institution in Cuba to consider how teachers defined educational technology. Based on teacher questionnaire responses, site-based teacher interviews, and field observations, technology was primarily viewed as a method for student preparation. In other words, teachers used technology to prepare students for their future careers and the technology they will need to be successful in that career. The study found that teachers highly valued their technical pedagogical training, believed that the growing spaces were an integral part of their technology based instruction, and claimed that the limited resources was their greatest barrier to integrating ICT in the classroom.

  19. Providing Appropriate Technology for Emerging Markets: Case Study on China’s Solar Thermal Industry

    Directory of Open Access Journals (Sweden)

    Jianghua Zhou

    2017-01-01

    Full Text Available Building on a case study of five Chinese solar thermal companies and one association, our study aims to understand how the innovator’s choices regarding the use of technology and organizational practices for new product development enable companies to design and diffuse appropriate technology in emerging markets. The study uncovers two critical factors that enhance the appropriateness of technology: redefining the identity of technology and building a local supply system. Our analysis shows that synergic innovation in both architecture and component leads to the appropriate functionalities desired by emerging markets. Moreover, modular design and the building of a local supply system enhance the process appropriateness of technology. Our study provides an empirical basis for advocating going beyond minor adaptations of existing products to creating appropriate technology for emerging markets, and extends our understandings of the upstream process of designing appropriate technology. Moreover, the emphasis on the local supply system reflects a holistic framework for shaping and delivering appropriate technology, expanding the existing research focus on the perspective of the technology itself. Our research also has managerial implications that may help firms tap into emerging markets.

  20. “服务型STS”理论及其论争%Debate over the Theory of Service-oriented STS

    Institute of Scientific and Technical Information of China (English)

    王彦雨

    2013-01-01

    For a long time, there is a mutual separation and distrust situation between constructivism STS and research science and technology policy research domain. But Webster has put forward the idea of“service-oriented STS”, emphasizing that the STS researchers should have the consciousness of“decision-making service” and enter into“policy room”. He tries to break the fence between science and technology policy research and constructivism STS.“Service-oriented STS” theory has aroused widespread academic debate, around the issues of the what role that STS researchers should take in the policy room, the relation between academic STS and Service-oriented STS, Brian Martin, Nowotny and Webster have made a series of debates. How to consider about those debates? The article gives its answer from the following three aspects of whether is it necessary for STS to enter policy room, who are the service objects of STS, what strategies that STS should take when having dialogues with policy makers. At last, the article puts forward the idea that STS should go into social practice field in the future.%长期以来,建构主义STS与科技政策研究传统之间形成了相互分离、相互不信任的局面。而韦伯斯特则提出了“服务型STS”理念,强调STS研究者应树立“决策服务”,进入“政策之屋”,力图打破STS与科技政策研究之间的栅栏。“服务型STS”理论引起了学界的广泛论争,温、诺沃特尼与韦伯斯特就政策之屋内STS所应扮演的角色、服务型STS与学术型STS之间的关系等问题展开了一系列对话与博弈。针对论争,从“STS是否有必要进入政策之屋”、“STS的服务对象是谁”、“STS应采取何种策略与决策者对话”三个方面进行分析,提出未来STS应进入社会实践场这一观念。

  1. Laboratory for Cognitive Studies of Work: A Case Study of the Intellectual Implications of a New Technology.

    Science.gov (United States)

    Martin, Laura M. W.; Scribner, Sylvia

    1991-01-01

    Study investigated how new technology affects the working procedures and mental activity of industrial machinists, examining how machinists learn to use computer numerical control technology. Results indicate areas of cognitive difference requiring further study (e.g., differences in conceptualization, formalization, and perspective, and shifts to…

  2. Job Mobility along the Technological Ladder : A Case Study of Australia

    OpenAIRE

    Cezary A Kapuscinski; P. N. JUNANKAR; Meng, Xin

    2004-01-01

    Labour economists have been increasingly interested in the impact of technological change upon employment and unemployment. However, the predominant focus of empirical studies has been on employment and unemployment stocks, whereas technological change is more likely to affect the flows of labour. This paper focuses on the latter issue. In particular, given the technological change, two major questions posed in this paper are: (i) who moves from low-tech to high-tech jobs and who moves from h...

  3. Study and Commercial Test on Technology for Deacidification of Distillate Oils

    Institute of Scientific and Technical Information of China (English)

    Tang Xiaodong; An Rong; Cui Yingxian; Du Hongyong

    2005-01-01

    A new kind of solvent for deacidification of distillate oils was introduced in this paper. After successful laboratory study this technology had been applied in commercial scale successfully. Compared to traditional caustic wash of distillate oils, this technology has a lot of merits, such as the broad range of distillates to be processed, low caustic consumption, recycle of deacidifying agent, absence of waste caustic discharge, and low equipment revamp expenses, which can have promising perspectives for exploitation and application of this technology.

  4. Study on the Effectiveness of Spam Detection Technologies

    Directory of Open Access Journals (Sweden)

    Muhammad Iqbal

    2016-01-01

    Full Text Available Nowadays, spam has become serious issue for computer security, because it becomes a main source for disseminating threats, including viruses, worms and phishing attacks. Currently, a large volume of received emails are spam. Different approaches to combating these unwanted messages, including challenge response model, whitelisting, blacklisting, email signatures and different machine learning methods, are in place to deal with this issue. These solutions are available for end users but due to dynamic nature of Web, there is no 100% secure systems around the world which can handle this problem. In most of the cases spam detectors use machine learning techniques to filter web traffic. This work focuses on systematically analyzing the strength and weakness of current technologies for spam detection and taxonomy of known approaches is introduced.

  5. Studies on Separation Process and Production Technology of Boron Isotope

    Directory of Open Access Journals (Sweden)

    LI Jian-ping

    2014-02-01

    Full Text Available The boron isotopes separation test was performed by chemical exchange reaction in the benzene ether -three boron fluoride system, which resulted to the boron isotopic enrichment of -10 in the liquid phase, the boron isotopic enrichment of -11 in the gas phase. After then, boron isotope separation trial production has been finished. In this process, the exchange column and complex tower normal operating parameters and the complex tower technology have been obtained, the problems of material distillation purification is solved, boron isotopes feasibility with PTFE packing enrichment is verified in an exchange column. Also, effect of operating pressure, flow and other parameters on boron -10 isotopic enrichment experiments and the effect and properties of the PTFE packing have been investigated in the existing system. All the results are very useful for the industrialization of the boron isotopes separation system.

  6. A study on future nuclear reactor technology and development strategy

    Energy Technology Data Exchange (ETDEWEB)

    Kim, S. Y.; Kim, S. H.; Sohn, D. S.; Suk, S. D.; Zee, S. K.; Yang, M. H.; Kim, H. J.; Park, W. S

    2000-12-01

    Development of nuclear reactor and fuel cycle technology for future is essential to meet the current issues such as enhancement of nuclear power reactor safety, economically competitive with gas turbine power generation, less production of radioactive waste, proliferation resistant fuel cycle, and public acceptance in consideration of lack of energy resources in the nuclear countries worldwide as well as in Korea. This report deals with as follows, 1) Review the world energy demand and supply perspective and analyse nature of energy and sustainable development to set-up nuclear policy in Korea 2) Recaptitulate the current long term nuclear R and D activities 3) Review nuclear R and D activities and programs of USA, Japan, France, Russia, international organizations such as IAEA, OECD/NEA 4) Recommend development directions of nuclear reactors and fuels.

  7. Communicative Signals Promote Object Recognition Memory and Modulate the Right Posterior STS.

    Science.gov (United States)

    Redcay, Elizabeth; Ludlum, Ruth S; Velnoskey, Kayla R; Kanwal, Simren

    2016-01-01

    Detection of communicative signals is thought to facilitate knowledge acquisition early in life, but less is known about the role these signals play in adult learning or about the brain systems supporting sensitivity to communicative intent. The current study examined how ostensive gaze cues and communicative actions affect adult recognition memory and modulate neural activity as measured by fMRI. For both the behavioral and fMRI experiments, participants viewed a series of videos of an actress acting on one of two objects in front of her. Communicative context in the videos was manipulated in a 2 × 2 design in which the actress either had direct gaze (Gaze) or wore a visor (NoGaze) and either pointed at (Point) or reached for (Reach) one of the objects (target) in front of her. Participants then completed a recognition memory task with old (target and nontarget) objects and novel objects. Recognition memory for target objects in the Gaze conditions was greater than NoGaze, but no effects of gesture type were seen. Similarly, the fMRI video-viewing task revealed a significant effect of Gaze within right posterior STS (pSTS), but no significant effects of Gesture. Furthermore, pSTS sensitivity to Gaze conditions was related to greater memory for objects viewed in Gaze, as compared with NoGaze, conditions. Taken together, these results demonstrate that the ostensive, communicative signal of direct gaze preceding an object-directed action enhances recognition memory for attended items and modulates the pSTS response to object-directed actions. Thus, establishment of a communicative context through ostensive signals remains an important component of learning and memory into adulthood, and the pSTS may play a role in facilitating this type of social learning.

  8. Interfacial scanning tunneling spectroscopy (STS) of chalcogenide/metal hybrid nanostructure

    Energy Technology Data Exchange (ETDEWEB)

    Saad, Mahmoud M.; Abdallah, Tamer [Physics Department, Faculty of Science, Ain Shams University, Abbassia, Cairo (Egypt); Easawi, Khalid; Negm, Sohair [Department of Physics and Mathematics, Faculty of Engineering (Shoubra), Benha University (Egypt); Talaat, Hassan, E-mail: hassantalaat@hotmail.com [Physics Department, Faculty of Science, Ain Shams University, Abbassia, Cairo (Egypt)

    2015-05-15

    Graphical abstract: - Highlights: • Comparing band gaps values obtained optically with STS. • Comparing direct imaging with calculated dimensions. • STS determination of the interfacial band bending of metal/chalcogenide. - Abstract: The electronic structure at the interface of chalcogenide/metal hybrid nanostructure (CdSe–Au tipped) had been studied by UHV scanning tunneling spectroscopy (STS) technique at room temperature. This nanostructure was synthesized by a phase transfer chemical method. The optical absorption of this hybrid nanostructure was recorded, and the application of the effective mass approximation (EMA) model gave dimensions that were confirmed by the direct measurements using the scanning tunneling microscopy (STM) as well as the high-resolution transmission electron microscope (HRTEM). The energy band gap obtained by STS agrees with the values obtained from the optical absorption. Moreover, the STS at the interface of CdSe–Au tipped hybrid nanostructure between CdSe of size about 4.1 ± 0.19 nm and Au tip of size about 3.5 ± 0.29 nm shows a band bending about 0.18 ± 0.03 eV in CdSe down in the direction of the interface. Such a result gives a direct observation of the electron accumulation at the interface of CdSe–Au tipped hybrid nanostructure, consistent with its energy band diagram. The presence of the electron accumulation at the interface of chalcogenides with metals has an important implication for hybrid nanoelectronic devices and the newly developed plasmon/chalcogenide photovoltaic solar energy conversion.

  9. STS-84 oxygen generator for Mir installation

    Science.gov (United States)

    1997-01-01

    McDonnell Douglas-SPACEHAB technicians strap in place a Russian- made oxygen generator on the floor of a SPACEHAB Double Module, being prepared for flight in the SPACEHAB Payload Processing Facility. From left, are Mark Halavin and Marc Tuttle. The oxygen generator, manufactured in Russia by RSC Energia, will be carried aboard the Space Shuttle Atlantis on Mission STS-84 for the Shuttles scheduled docking with the Russian Space Station Mir next month. The nearly 300-pound generator will replace one of two Mir units that have been malfunctioning recently. The generator functions by electrolysis, which separates water into its oxygen and hydrogen components. The hydrogen is vented and the oxygen is used for breathing by the Mir crew. The generator is 4.2 feet in length and 1.4 feet in diameter. STS-84, which is planned to include a Mir crew exchange of astronaut C. Michael Foale for Jerry M. Linenger, is targeted for a May 15 liftoff. It will be the sixth Shuttle-Mir docking.

  10. STS-41 Space Shuttle mission report

    Science.gov (United States)

    Camp, David W.; Germany, D. M.; Nicholson, Leonard S.

    1990-01-01

    The STS-41 Space Shuttle Program Mission Report contains a summary of the vehicle subsystem activities on this thirty-sixth flight of the Space Shuttle and the eleventh flight of the Orbiter vehicle, Discovery (OV-103). In addition to the Discovery vehicle, the flight vehicle consisted of an External Tank (ET) (designated as ET-39/LWT-32), three Space Shuttle main engines (SSME's) (serial numbers 2011, 2031, and 2107), and two Solid Rocket Boosters (SRB's), designated as BI-040. The primary objective of the STS-41 mission was to successfully deploy the Ulysses/inertial upper stage (IUS)/payload assist module (PAM-S) spacecraft. The secondary objectives were to perform all operations necessary to support the requirements of the Shuttle Backscatter Ultraviolet (SSBUV) Spectrometer, Solid Surface Combustion Experiment (SSCE), Space Life Sciences Training Program Chromosome and Plant Cell Division in Space (CHROMEX), Voice Command System (VCS), Physiological Systems Experiment (PSE), Radiation Monitoring Experiment - 3 (RME-3), Investigations into Polymer Membrane Processing (IPMP), Air Force Maui Optical Calibration Test (AMOS), and Intelsat Solar Array Coupon (ISAC) payloads. The sequence of events for this mission is shown in tabular form. Summarized are the significant problems that occurred in the Orbiter subsystems during the mission. The official problem tracking list is presented. In addition, each Orbiter problem is cited in the subsystem discussion.

  11. Care in context: Becoming an STS researcher.

    Science.gov (United States)

    Atkinson-Graham, Melissa; Kenney, Martha; Ladd, Kelly; Murray, Cameron Michael; Simmonds, Emily Astra-Jean

    2015-10-01

    This collaborative article, written by graduate students who attended the Politics of Care in Technoscience Workshop, brings the themes in this volume to bear on their own developing science and technology study projects and research practices. Exploring the contours of five specific moments where questions of care have arisen in the course of their everyday research, they do not find a single or untroubled definition of care; instead, care is often a site of ambivalence, tension, and puzzlement. However, despite this uneasiness, they argue that taking the time to reflect on the multiple, sometimes conflicting, forms and definitions of care within a specific research context can inform the way that science and technology studies scholars envision and conduct their work.

  12. Product Development Partnerships: Case studies of a new mechanism for health technology innovation.

    Science.gov (United States)

    Mahoney, Richard T

    2011-08-26

    There is a continuing need for new health technologies to address the disease burdens of developing countries. In the last decade Product Development Partnerships (PDP) have emerged that are making important contributions to the development of these technologies. PDPs are a form of public private partnerships that focus on health technology development. PDPs reflect the current phase in the history of health technology development: the Era of Partnerships, in which the public and private sectors have found productive ways to collaborate. Successful innovation depends on addressing six determinants of innovation. We examine four case studies of PDPs and show how they have addressed the six determinants to achieve success.

  13. Study on Technology Development Status of Genetically Modified Soybean Based on Patent Analysis

    Directory of Open Access Journals (Sweden)

    Miao Runlian

    2015-07-01

    Full Text Available Genetically modified soybean is a product of the emerging bio-technology in the 1980s and is widely concerned all over the world. This study analyzed GM soybean related patent documents in China, the United States and Europe, aiming to find out the R and D status and trends as well as technical distribution pattern of GM soybean in the world. It analyzed the patent general tendency, regional distribution and key technologies, clarified major countries who master such technologies, relevant companies, technologies, etc. Finally, the author put forward solutions for the strategic development of GM soybean patents.

  14. Enhancing international technology cooperation for climate change mitigation. Lessons from an electromobility case study

    Energy Technology Data Exchange (ETDEWEB)

    Bhasin, Shikha

    2014-07-01

    As a global agreement on climate mitigation and absolute emissions reductions remains grid-locked, this paper assesses whether the prospects for international technology cooperation in low-carbon sectors can be improved. It analyses the case of international cooperation on electric vehicle technologies to elaborate on the trade-offs that cooperation such as this inherently attempts to balance- national growth objectives of industrial and technology development versus the global goods benefit of reducing greenhouse gas (GHG) emissions. It focuses on bilateral German-Chinese programmes for electric vehicle development, as well as multilateral platforms on low-carbon technology cooperation related to electric vehicles. Based on insights from these cases studies, this paper ultimately provides policy recommendations to address gaps in international technology cooperation at a bilateral level for ongoing German-Chinese engagement on electric vehicles; and at a multilateral level with a focus on the emerging technology cooperation framework of the United Nations Framework Convention on Climate Change (UNFCCC).

  15. The Population Ecology of Technology: An Empirical Study of US Biotechnology Patents from 1976 to 2003

    Science.gov (United States)

    van den Oord, Ad; van Witteloostuijn, Arjen

    2017-01-01

    A detailed understanding of technological change as an evolutionary process is currently not well understood. To increase our understanding, we build upon theory from organizational ecology to develop a model of endogenous technological growth and determine to what extent the pattern of technological growth can be attributed to the structural or systemic characteristics of the technology itself. Through an empirical investigation of patent data in the biotechnology industry from 1976 to 2003, we find that a technology’s internal (i.e., density and diversity) ecological characteristics have a positive effect on its growth rate. The niche’s external characteristics of crowding and status have a negative effect on its growth rate. Hence, applying theory from organizational ecology increases our understanding of technological change as an evolutionary process. We discuss the implications of our findings for the study of technological growth and evolution, and suggest avenues for further research. PMID:28081570

  16. Multiculturalism in Technology-Based Education: Case Studies on ICT-Supported Approaches

    Science.gov (United States)

    Garcia-Penalvo, Francicso Jose

    2013-01-01

    Our differences in language, cultures, and history around the world play a vital role in the way we learn. As technology-based education continues to be used worldwide, there is an ever growing interest in how multiculturalism comes into effect. Multiculturalism in Technology-Based Education: Case Studies on ICT-Supported Approaches explores the…

  17. The Impact of Technological Change; The American Experience. Studies in Employment and Unemployment.

    Science.gov (United States)

    Haber, William; And Others

    Technological change is a complex term involving many more factors than "changes in machinery or automation." Six changes which affect jobs and influence skills in our industrial systems that could logically be called technological change have been identified: (1) scientific management, or time and motion studies, (2) mergers and consolidations,…

  18. Study of the Performance and Characteristics of U.S. Academic Research Institution Technology Commercialization (ARITC)

    Science.gov (United States)

    Kim, Jisun

    2012-01-01

    This dissertation aims to provide a better understanding of the technology licensing practices of academic research institutions. The study identifies time durations in licensing and incorporates these into a model to evaluate licensing performance. Performance is measured by the efficiency of an institution's technology licensing process and…

  19. Interpersonal Consulting Skills for Instructional Technology Consultants: A Multiple Case Study

    Science.gov (United States)

    van Leusen, Peter; Ottenbreit-Lefwich, Anne T.; Brush, Thomas

    2016-01-01

    Building a trust-based relationship with faculty is one of the most important attributes of effective Instructional Technology Consultants (ITC) in order to integrate emerging technologies into higher education. Utilizing a multiple case study research design, four experienced ITCs at a large urban research university located in the Midwest showed…

  20. Technology Readiness of School Teachers: An Empirical Study of Measurement and Segmentation

    Science.gov (United States)

    Badri, Masood; Al Rashedi, Asma; Yang, Guang; Mohaidat, Jihad; Al Hammadi, Arif

    2014-01-01

    The Technology Readiness Index (TRI) developed by Parasuraman (2000) was adapted to measure the technology readiness of public school teachers in Abu Dhabi, United Arab Emirates. The study aims at better understanding the factors (mostly demographics) that affect such readiness levels. In addition, Abu Dhabi teachers are segmented into five main…

  1. Sensor Technology Baseline Study for Enabling Condition Based Maintenance Plus in Army Ground Vehicles

    Science.gov (United States)

    2012-03-01

    and mechanisms are identified. Based on this analysis, baselines sensor technologies are determined to prognosticate these types failure causes early...Current/voltage sensor measured at sensor terminals; Fluid level sensor Excessive slippage and clutch chatter Internal transmission failure ... TYPE Final 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE Sensor Technology Baseline Study for Enabling Condition Based Maintenance Plus in

  2. Instructional Technology Adoption in Higher Education: An Action Research Case Study.

    Science.gov (United States)

    Groves, Melissa M.; Zemel, Paula C.

    2000-01-01

    Describes an action research study of faculty and graduate teaching assistants at the University of Tennessee that was conducted to assess technology use by faculty, including their perceived barriers to and needs for technology adoption and use. Discusses the development of a Web-based resource in response to these needs. (Author/LRW)

  3. Developing Pedagogical Technology Integration Content Knowledge in Preservice Teachers: A Case Study Approach

    Science.gov (United States)

    Brantley-Dias, Laurie; Kinuthia, Wanjira; Shoffner, Mary B.; de Castro, Christopher; Rigole, Neil J.

    2007-01-01

    This research examined the effects of case-based instructional strategies on the development of Pedagogical Technology Integration Content Knowledge (PTICK) in alternative teacher preparation students. The study was part of the Crossroads Project funded by the Preparing Tomorrow's Teachers for Using Technology (PT3) grant from the United States…

  4. Instructors' Use of Technology in Post-Secondary Undergraduate Mathematics Teaching: A Local Study

    Science.gov (United States)

    Jesso, A. T.; Kondratieva, M. F.

    2016-01-01

    In this study, instructors of undergraduate mathematics from post-secondary institutions in Newfoundland were surveyed (N = 13) and interviewed (N = 8) about their use of, experiences with, and views on, technologically assisted teaching. It was found that the majority of them regularly use technologies for organizational and communication…

  5. A Study on Teaching Quality of Taiwan Government Training Civil Servants with Educational Technology

    Science.gov (United States)

    Hsiao, Luke H. C.

    2012-01-01

    When economic globalization, informatization, and marketization are rapidly developing, the world is reaching the globally industrial society based on information technology. In such a fierce competition, human resource is gradually placed on the critical role. This study aims to: (1) understand the present situation of Educational Technology and…

  6. Rebuilding Haiti's Educational Access: A Phenomenological Study of Technology Use in Education Delivery

    Science.gov (United States)

    Sandiford, Gladwyn A.

    2013-01-01

    There is a lack of access to technology blended with face-to-face instruction and learning in Haiti. Despite this lack of access, some Haitian college students have nevertheless leveraged technology to overcome the obstacles of poverty and obtain a higher education. This phenomenological study explored the lived experiences of 20 adult…

  7. A Meta-Analysis of Effectiveness Studies on Computer Technology-Supported Language Learning

    Science.gov (United States)

    Grgurovic, Maja; Chapelle, Carol A.; Shelley, Mack C.

    2013-01-01

    With the aim of summarizing years of research comparing pedagogies for second/foreign language teaching supported with computer technology and pedagogy not-supported by computer technology, a meta-analysis was conducted of empirical research investigating language outcomes. Thirty-seven studies yielding 52 effect sizes were included, following a…

  8. Students' Experiences and Expectations of Technologies: An Australian Study Designed to Inform Planning and Development Decisions

    Science.gov (United States)

    Gosper, Maree; Malfroy, Janne; McKenzie, Jo

    2013-01-01

    The pace of technological change accompanied by an evolution in social, work-based and study behaviours and norms poses particular challenges for universities as they strive to develop high quality and sustainable technology-rich learning environments. Maintaining currency with the latest advances is resource intensive, hence the costs incurred in…

  9. Teachers as Participatory Designers: Two Case Studies with Technology-Enhanced Learning Environments

    Science.gov (United States)

    Cober, Rebecca; Tan, Esther; Slotta, Jim; So, Hyo-Jeong; Könings, Karen D.

    2015-01-01

    Teachers are not typically involved as participatory designers in the design of technology-enhanced learning environments. As they have unique and valuable perspectives on the role of technology in education, it is of utmost importance to engage them in a participatory design process. Adopting a case study methodology, we aim to reveal in what…

  10. Technology-Based Content through Virtual and Physical Modeling: A National Research Study

    Science.gov (United States)

    Ernst, Jeremy V.; Clark, Aaron C.

    2009-01-01

    Visualization is becoming more prevalent as an application in science, engineering, and technology related professions. The analysis of static and dynamic graphical visualization provides data solutions and understandings that go beyond traditional forms of communication. The study of technology-based content and the application of conceptual…

  11. Perception by French Students of the Gendered Nature of Material Artifacts Studied in Technology Education

    Science.gov (United States)

    Colette, Andreucci; Marjolaine, Chatoney

    2017-01-01

    Many studies have shown the importance of the socio-cultural factors that lead girls to desert scientific and technological courses. Over a long period, the contents of the French technology education (TE) college curricula may well have contributed to strengthening the feeling among girls that this discipline was better suited to boys. The choice…

  12. A Study of School Leaders and How They Impact Classroom Use of Technology

    Science.gov (United States)

    Downs, Robert

    2011-01-01

    The purpose of this study was to examine the relationship between a principal's personality type and a school's classroom use of technology. Myers Briggs Type Indicator data was collected from 48 principals in a large suburban district in the Metro Atlanta area, as well as, observational data documenting student use of technology. The Georgia…

  13. School District Information Technology Disaster Recovery Planning: An Explanatory Case Study

    Science.gov (United States)

    Gray, Shaun L.

    2017-01-01

    Despite research and practitioner articles outlining the importance information technology disaster plans (ITDRPs) to organizational success, barriers have impeded the process of disaster preparation for Burlington County New Jersey school districts. The purpose of this explanatory qualitative case study was to understand how technology leader…

  14. School Finance and Technology: A Case Study Using Grid and Group Theory to Explore the Connections

    Science.gov (United States)

    Case, Stephoni; Harris, Edward L.

    2014-01-01

    Using grid and group theory (Douglas 1982, 2011), the study described in this article examined the intersections of technology and school finance in four schools located in districts differing in size, wealth, and commitment to technology integration. In grid and group theory, grid refers to the degree to which policies and role prescriptions…

  15. Study Programmes for Engineers from Developing Countries at the Norwegian Institute of Technology.

    Science.gov (United States)

    Lasson, Axel; Hermansen, John

    1989-01-01

    Describes the background of the study and fellowship programs for graduates from the developing countries at the Norwegian Institute of Technology. Discusses some experiences with the programs. Includes a brief description of five courses: (1) "Pulp and Paper Technology"; (2) "Marine Civil Engineering"; (3) "Hydropower…

  16. Interpersonal Consulting Skills for Instructional Technology Consultants: A Multiple Case Study

    Science.gov (United States)

    van Leusen, Peter; Ottenbreit-Lefwich, Anne T.; Brush, Thomas

    2016-01-01

    Building a trust-based relationship with faculty is one of the most important attributes of effective Instructional Technology Consultants (ITC) in order to integrate emerging technologies into higher education. Utilizing a multiple case study research design, four experienced ITCs at a large urban research university located in the Midwest showed…

  17. Rebuilding Haiti's Educational Access: A Phenomenological Study of Technology Use in Education Delivery

    Science.gov (United States)

    Sandiford, Gladwyn A.

    2013-01-01

    There is a lack of access to technology blended with face-to-face instruction and learning in Haiti. Despite this lack of access, some Haitian college students have nevertheless leveraged technology to overcome the obstacles of poverty and obtain a higher education. This phenomenological study explored the lived experiences of 20 adult…

  18. Developing the 21st-Century Social Studies Skills through Technology Integration

    Science.gov (United States)

    Farisi, Mohammad Imam

    2016-01-01

    Recently, technology has become an educational necessity in global-digital era. Facing these phenomena, social studies (SS) should make innovations related to changes of 21st-century skills and learning paradigm, which is characterized by the principles of disclosure of information, computing, automation, and communication. Technology integration…

  19. Evaluating Teleworkers' Acceptance of Mobile Technology: A Study Based on the Utaut Model

    Science.gov (United States)

    Mills, Jamia Sharie

    2016-01-01

    Mobile technology has provided flexible methods for employees to complete work-related tasks without being tied to an office. Research has predicted the level of training on mobile technology may impact a user's ability to complete work responsibilities accurately. This study intended to examine what behavior factors from the unified theory of…

  20. Teachers as Participatory Designers: Two Case Studies with Technology-Enhanced Learning Environments

    Science.gov (United States)

    Cober, Rebecca; Tan, Esther; Slotta, Jim; So, Hyo-Jeong; Könings, Karen D.

    2015-01-01

    Teachers are not typically involved as participatory designers in the design of technology-enhanced learning environments. As they have unique and valuable perspectives on the role of technology in education, it is of utmost importance to engage them in a participatory design process. Adopting a case study methodology, we aim to reveal in what…