WorldWideScience

Sample records for technology spie-the international

  1. International technology transfer

    International Nuclear Information System (INIS)

    Kwon, Won Gi

    1991-11-01

    This book introduces technology progress and economic growth, theoretical consideration of technology transfer, policy and mechanism on technology transfer of a developed country and a developing country, reality of international technology transfer technology transfer and industrial structure in Asia and the pacific region, technology transfer in Russia, China and Eastern Europe, cooperation of science and technology for development of Northeast Asia and strategy of technology transfer of Korea.

  2. International monitoring of technology

    International Nuclear Information System (INIS)

    Fischer, W.; Stein, G.

    1990-01-01

    The monitoring of the civilian nuclear energy sector has been effected successfully by IAEA and EURATOM and has contributed to a reduction of fears within the communities of nations. Certainly, it will not be possible to subject the whole world and whole spectrum of technology to monitoring. However, the nations should be enabled to reduce their greatest fears concerning an abuse and a misuse of technology by verification, and to check the compliance with such international agreements which regulate the application of a number of technologies. There are some (as yet rudimentary) approaches to an international verification in the field of environmental protection and resource policies. Nuclear energy with its sophisticated verification procedure has taken one great step ahead of the other fields. The strengths and weaknesses of its verification regime should be learned from when filling the virgin fields of international technology monitoring and its instrument, i.e. international verification. (orig./HSCH) [de

  3. International nuclear technology transfer

    International Nuclear Information System (INIS)

    Cartwright, P.; Rocchio, J.P.

    1978-01-01

    Light water reactors (LWRs), originally developed in the United States, became the nuclear workhorses for utilities in Europe and Japan largely because the U.S. industry was willing and able to transfer its nuclear know-how abroad. In this international effort, the industry had the encouragement and support of the U.S. governement. In the case of the boiling water reactor (BWR) the program for technology transfer was developed in response to overseas customer demands for support in building local designs and manufacturing capabilities. The principal vehicles have been technology exchange agreements through which complete engineering and manufacturing information is furnished covering BWR systems and fuel. Agreements are held with companies in Germany, Japan, Italy, and Sweden. In recent years, a comprehensive program of joint technology development with overseas manufacturers has begun. The rapidly escalating cost of nuclear research and development make it desirable to minimize duplication of effort. These joint programs provide a mechanism for two or more parties jointly to plan a development program, assign work tasks among themselves, and exchange test results. Despite a slower-than-hoped-for start, nuclear power today is playing a significant role in the economic growth of some developing countries, and can continue to do so. Roughly half of the 23 free world nations that have adopted LWRs are developing countries

  4. International Technology Transfer.

    Science.gov (United States)

    Morris, Robert G.

    The flow of technology out of the United States is discussed. Methods of technology flow, such as licensing and investing, are identified, and the advantages and disadvantages of technology transfer are discussed, especially in relation to the government's role. (MLH)

  5. Technology and international climate policy

    Energy Technology Data Exchange (ETDEWEB)

    Clarke, Leon; Calvin, Kate; Edmonds, James A.; Kyle, Page; Wise, Marshall

    2009-05-01

    Both the nature of international climate policy architectures and the development and diffusion of new energy technologies could dramatically influence future costs of reducing global emissions of greenhouse gases. This paper explores the implications of interactions between technology availability and performance and international policy architectures for technology choice and the social cost of limiting atmospheric CO2 concentrations to 500 ppm by the year 2095. Key issues explored in the paper include the role of bioenergy production with CO2 capture and storage (CCS), overshoot concentration pathways, and the sensitivity of mitigation costs to policy and technology.

  6. Technology and international climate policy

    International Nuclear Information System (INIS)

    Clarke, Leon; Calvin, Kate; Edmonds, James A.; Kyle, Page; Wise, Marshall

    2009-01-01

    Both the nature of international climate policy architectures and the development and diffusion of new energy technologies could dramatically influence future costs of reducing global emissions of greenhouse gases. This paper explores the implications of interactions between technology availability and performance and international policy architectures for technology choice and the social cost of limiting atmospheric CO2 concentrations to 500 ppm by the year 2095. Key issues explored in the paper include the role of bioenergy production with CO2 capture and storage (CCS), overshoot concentration pathways, and the sensitivity of mitigation costs to policy and technology.

  7. International Containment Technology Conference: Proceedings

    International Nuclear Information System (INIS)

    1997-01-01

    This document contains the manuscripts of the papers and posters presented at the 1997 International Containment Technology Conference and Exhibition. These manuscripts represent a valuable compilation of information and data on the environmental challenges and technology-based solutions associated with containment technologies. The purpose of the conference was to promote the advancement of containment technologies by providing a forum from which participants from related disciplines could meet to exchange ideas and information on recent developments. Selected papers were indexed separately for inclusion in the Energy Science and Technology Database

  8. International Journal of Engineering, Science and Technology ...

    African Journals Online (AJOL)

    International Journal of Engineering, Science and Technology: Journal Sponsorship. Journal Home > About the Journal > International Journal of Engineering, Science and Technology: Journal Sponsorship. Log in or Register to get access to full text downloads.

  9. International Journal of Engineering, Science and Technology ...

    African Journals Online (AJOL)

    International Journal of Engineering, Science and Technology: About this journal. Journal Home > International Journal of Engineering, Science and Technology: About this journal. Log in or Register to get access to full text downloads.

  10. Program Integration for International Technology Exchange

    International Nuclear Information System (INIS)

    Rea, J.L.

    1993-01-01

    Sandia National Laboratories (SNL), Albuquerque, New Mexico, supports the International Technology Exchange Division (ITED) through the integration of all international activities conducted within the DOE's Office of Environmental Management (EM)

  11. International Technology Exchange Division: 1993 Annual report

    International Nuclear Information System (INIS)

    1993-01-01

    The Office of Technology Development (OTD) was established to ensure that reliable and acceptable technologies are available for implementation at DOE sites and that a technically trained work force is available to complete the EM mission by 2019. OTD established the International Technology Exchange Staff (ITES) to identify, evaluate, and acquire international technologies which can accelerate US DOE cleanup operations. ITES's goal is to pursue international collaboration among government organizations, educational institutions, and private industry to identify world-wide needs and available technologies that will meet US environmental needs in general, and EM cleanup needs in particular; and establish mechanisms by which US government ER/WM technologies will be transferred to the US private sector for commercialization and export to international markets. ITES has developed the following strategic objectives to implement its international goals: develop and implement EM's policy for international programs in accordance with DOE and US Government policies and regulations; establish efficient and predictable international technology transfer mechanisms; assist the US private sector in the commercialization and deployment of federally funded EM technologies and related knowledge in international markets; leverage US and non-US resources to accelerate international development and regulatory acceptance of EM technologies; contribute to the improvement of EM's training of US students, scientists, and managers on international environmental issues. A summary and descriptions of program activities and accomplishments are given for 17 programs which comprise the four main areas of the ITES program: Activities with the Former Soviet Union, International Technology Transfer, International Cooperation, and Information Systems and Publications. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

  12. Apheresis technologies: an international perspective.

    Science.gov (United States)

    Malchesky, P S; Bambauer, R; Horiuchi, T; Kaplan, A; Sakurada, Y; Samuelsson, G

    1995-04-01

    The developments in apheresis techniques and their clinical applications world-wide are technologically driven. In the past, apheresis survey statistics have high-lighted both the differences by region in clinical practice and in the types of technologies utilized. Such differences have provided a basis for the scientific and clinical assessments of these apheresis technologies and their clinical outcomes and have stimulated the marketing and business development of new technologies world-wide. A review of the regional practices and technologies utilized provides a perspective on the future role of apheresis and its developments in clinical practice. While technology is a driving force for the development of new techniques for clinical practice, it is not the only market force. For technology introduction, several other important issues need to be considered. Regulations at the local and, most importantly, the federal level impact the timing for new technology introduction. Reimbursement by healthcare payers is critically important from the initiation of the development of a technology through its clinical use. Clinical trials are critically important to show the safety and clinical- and cost-effectiveness of the technology in order for payers to provide reimbursement for its use, but these trials are sometimes long and costly. Research funding availability at the governmental and commercial levels critically impacts new technology investigation and its introduction. Apheresis technology developments offer new hopes and promises for the clinical team; however, their development, introduction, and utilization will be influenced by the prevailing market forces.

  13. The use of technology in international collaboration

    DEFF Research Database (Denmark)

    Livonen, Mirja; Sonnenwald, Diane H.

    2000-01-01

    International collaboration is emerging as an essential function for organizations, playing an important role in organizational strategy, performance and knowledge management. Two case studies of international collaboration are discussed in this paper. Participants' perceptions and use...... of technology to collaborate are examined from the perspective of sense of presence, participation, task type, productivity and ease of use. The data suggest that technology compatibility with cultural and work style preferences and technology infrastructure is more important than media richness, in contrast...

  14. International Journal of Engineering, Science and Technology

    African Journals Online (AJOL)

    International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 7, No 3 (2015) >. Log in or Register to get access to full text downloads.

  15. International Journal of Engineering, Science and Technology

    African Journals Online (AJOL)

    International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 2, No 11 (2010) >. Log in or Register to get access to full text downloads.

  16. International Journal of Engineering, Science and Technology

    African Journals Online (AJOL)

    International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 8, No 3 (2016) >. Log in or Register to get access to full text downloads.

  17. International Journal of Engineering, Science and Technology

    African Journals Online (AJOL)

    International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 3, No 3 (2011) >. Log in or Register to get access to full text downloads.

  18. International Journal of Engineering, Science and Technology

    African Journals Online (AJOL)

    International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 2, No 2 (2010) >. Log in or Register to get access to full text downloads.

  19. International Journal of Engineering, Science and Technology

    African Journals Online (AJOL)

    International Journal of Engineering, Science and Technology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 4, No 4 (2012) >. Log in or Register to get access to full text downloads.

  20. International technology identification, transfer, and program support

    International Nuclear Information System (INIS)

    Kitchen, B.

    1993-01-01

    Savannah River Site (SRS) activities primarily address vitrification technologies being investigated with Japan and the former Soviet Union (FSU). They also support the overall management of EM's international activities

  1. 13th International Conference on Information Technology

    CERN Document Server

    2016-01-01

    This book collects articles presented at the 13th International Conference on Information Technology- New Generations, April, 2016, in Las Vegas, NV USA. It includes over 100 chapters on critical areas of IT including Web Technology, Communications, Security, and Data Mining.

  2. International Journal of Engineering, Science and Technology ...

    African Journals Online (AJOL)

    International Journal of Engineering, Science and Technology: Editorial Policies ... Original theoretical work and application-based studies, which contributes to a better understanding of engineering, science and technological challenges, are ... The time between review and publication can range from 2-6 months ...

  3. PREFACE: Third International Symposium on Atomic Technology

    Science.gov (United States)

    Yasumori, Atsuo

    2009-09-01

    The International Symposium on Atomic Technology (ISAT) is held every year. The Third Symposium (ISAT-3) was held on 5-6 March 2009 at the Tokyo International Exchange Center, Tokyo, Japan jointed with the Third Polyscale Technology Workshop (PTW-3). The ISAT-3 symposium was intended to offer a forum for the discussion of the latest progress in atomic technologies, which was successively held after ISAT-1 at Tsukuba and ISAT-2 at Awaji in 2007. The symposium was attended by 136 participants. There were 12 invited and 4 oral presentations. The number of poster presentations was 101. From all the contributions, 32 papers selected through review process are contained in this volume. The 'Atomic Technology Project' and the 'Polyscale Technology Project' were started in 2006 as the joint project of three institutions; (1) Center for Atomic and Molecular Technologies, Graduate School of Engineering, Osaka University (CAMT), (2) Tsukuba Research Center for Interdisciplinary Materials Science, Graduate School of Pure and Applied Sciences, University of Tsukuba (TIMS) and (3) Polyscale Technology Research Center, Research Institute for Science and Technology, Tokyo University of Science (PTRC), each of which were independently pursuing atomic and polyscale technologies. The project is funded by the Ministry of Education, Culture, Sports, Science and Technology of Japan. The goal of these projects is to contribute to the development of atomic and polyscale science and technologies. In this symposium, four research fields were focused on: Biomedical Applications, Fabrication for Advanced Materials and Devices, Magnetic Applications, and Quantum and Molecular Engineering for Advanced Technologies. Atsuo Yasumori Conference Chair Polyscale Technology Research Center, Research Institute for Science and Technology, Tokyo University of Science, 2641 Yamazaki, Noda, Chiba 278-8510, Japan.

  4. Economics and technology in international law

    International Nuclear Information System (INIS)

    1982-01-01

    This volume presents the main address, the lectures and the discussions of the symposium. The papers presented to the symposium were the following: the Draft Convention on the Law of the Sea and problems of the international deep seabed regime; developments in science and technology, as a challenge to international law; modern fishery engineering and its impact on international law; the EEC agricultural market - a case study of European Law; problems of international law in connection with a new system of the world economy; the GATT and a new world economic system; the Third World and UNCTAD; international disaster relief and mutual assistance in case of accidents, especially with a view to Atomic Energy Law; organisation, scope and limits of international co-operation in the peaceful use of nuclear energy. (HSCH) [de

  5. International Center for Gas Technology Information

    International Nuclear Information System (INIS)

    Gad, L.H.

    1993-01-01

    Based on an acknowledgement of the growing importance of natural gas, a number of European countries, USA, Japan and the Russian Federation have worked together in order to establish a common center of information on natural gas technology under the auspices of the International Energy Agency. Centers were to be established in Washington and in Denmark. The centers will concern themselves with establishing an international information center for gas technology, effecting natural gas technology transfer between global regions, carrying out analytical studies on the energy market and the development of technology within the field of natural gas. The structure of the decision-making processes that will be employed is explained in addition to the organization and economy. The centers should build up a global information network between the relevant countries, their gas companies, institutions etc. (AB)

  6. Reliability test for reactor internals rejuvenation technology

    International Nuclear Information System (INIS)

    Uchiyama, Junichi

    1998-01-01

    41 transparencies were presented on the subject of 'Reliability test for reactor internals rejuvenation technology'. The items presented give an introduction on the management of plant life in Japan and introduce the Nuclear Power Engineering Corporation (NUPEC). The question of what reliability tests for rejuvenation of reactor internals are is discussed in some detail and an outline of each test is given. Altogether six methods to rejuvenate reactor internals are presented, two of which have already been applied to actual plants. The presentation was supported by many detailed drawings and images

  7. Fifth International Symposium on Magnetic Suspension Technology

    Science.gov (United States)

    Groom, Nelson J. (Editor); Britcher, Colin P.

    2000-01-01

    In order to examine the state of technology of all areas of magnetic suspension and to review recent developments in sensors, controls, superconducting magnet technology, and design/implementation practices, the Fifth International Symposium on Magnetic Suspension Technology was held at the Radisson Hotel Santa Barbara, Santa Barbara, California, on December 1-3, 1999. The symposium included 18 sessions in which a total of 53 papers were presented. The technical sessions covered the areas of bearings, controls, modeling, electromagnetic launch, magnetic suspension in wind tunnels, applications flywheel energy storage, rotating machinery, vibration isolation, and maglev. A list of attendees is included in the document.

  8. International Conference on Mechanical Engineering and Technology

    CERN Document Server

    Mechanical Engineering and Technology

    2012-01-01

    The volume includes a set of selected papers extended and revised from the 2011 International Conference on Mechanical Engineering and Technology, held on London, UK, November 24-25, 2011.   Mechanical engineering technology is the application of physical principles and current technological developments to the creation of useful machinery and operation design. Technologies such as solid models may be used as the basis for finite element analysis (FEA) and / or computational fluid dynamics (CFD) of the design. Through the application of computer-aided manufacturing (CAM), the models may also be used directly by software to create "instructions" for the manufacture of objects represented by the models, through computer numerically controlled (CNC) machining or other automated processes, without the need for intermediate drawings.   This volume covers the subject areas of mechanical engineering and technology, and also covers interdisciplinary subject areas of computers, communications, control and automation...

  9. International Conference on Mobile and Wireless Technology

    CERN Document Server

    Wattanapongsakorn, Naruemon; Joukov, Nikolai

    2016-01-01

    This book presents the peer-reviewed contributions of ICMWT2016, an international conference devoted to mobile and wireless technology. Researchers and professionals from academia and industry met to discuss the cutting-edge developments in the field. The book includes papers on mobile and wireless networks, the increasingly important security issues, data management, as well as the latest developments in mobile software development.

  10. Importance of international standards on hydrogen technologies

    International Nuclear Information System (INIS)

    Bose, T.K.; Gingras, S.

    2001-01-01

    This presentation provided some basic information regarding standards and the International Organization for Standardization (ISO). It also explained the importance of standardization activities, particularly ISO/TC 197 which applies to hydrogen technologies. Standards are established by consensus. They define the minimum requirements that will ensure that products and services are reliable and effective. Standards contribute to the elimination of technical barriers to trade (TBT). The harmonization of standards around the world is desirable in a free trade environment. The influence of the TBT on international standardization was discussed with particular reference to the objectives of ISO/TC 197 hydrogen technologies. One of the priorities for ISO/TC 197 is a hydrogen fuel infrastructure which includes refuelling stations, fuelling connectors, and storage technologies for gaseous and liquid hydrogen. Other priorities include an agreement between the International Electrotechnical Commission (IEC) and the ISO, in particular the IEC/TC 105 and ISO/TC 197 for the development of fuel cell standards. The international standards that have been published thus far include ISO 13984:1999 for liquid hydrogen, land vehicle fuelling system interface, and ISO 14687:1999 for hydrogen fuel product specification. Standards are currently under development for: liquid hydrogen; airport hydrogen fuelling facilities; gaseous hydrogen blends; basic considerations for the safety of hydrogen systems; gaseous hydrogen and hydrogen blends; and gaseous hydrogen for land vehicle filling connectors. It was concluded that the widespread use of hydrogen is dependent on international standardization

  11. Reliability tests for reactor internals replacement technology

    International Nuclear Information System (INIS)

    Fujimaki, K.; Uchiyama, J.; Ohtsubo, T.

    2000-01-01

    Structural damage due to aging degradation of LWR reactor internals has been reported in several nuclear plants. NUPEC has started a project to test the reliability of the technology for replacing reactor internals, which was directed at preventive maintenance before damage and repair after damage for the aging degradation. The project has been funded by the Ministry of International Trade and Industry (MITI) of Japan since 1995, and it follows the policy of a report that the MITI has formally issued in April 1996 summarizing the countermeasures to be considered for aging nuclear plants and equipment. This paper gives an outline of the whole test plans and the test results for the BWR reactor internals replacement methods; core shroud, ICM housing, and CRD Housing and stub tube. The test results have shown that the methods were reliable and the structural integrity was appropriate based on the evaluation. (author)

  12. Reliability tests for reactor internals rejuvenation technology

    International Nuclear Information System (INIS)

    Fujimaki, Katsumi; Hitoki, Yoichi; Otsubo, Toru; Uchiyama, Junichi

    1998-01-01

    Structural damage due to aging degradation of LWR reactor internals has been reported in several nuclear plants. NUPEC has started a project to test the reliability of the technology for rejuvenating reactor internals which has been funded by the Ministry of International Trade and Industry (MITI) of Japan since 1995. The project follows the policy of a report that the MITI has formally issued in April 1996 summarizing the countermeasures to be considered for aging nuclear plants and equipment. This paper gives an outline of the test plans and results which are directed at preventive maintenance before damage and repair after damage for reactor internals aging degradation. The test results for the replacement methods of ICM housing and BWR core shroud have shown that the methods were reliable and the structural integrity was appropriate based on the evaluation. (author)

  13. PREFACE: The International Symposium on Atomic Technology

    Science.gov (United States)

    Shirai, Yasuharu

    2008-03-01

    The International Symposium on Atomic Technology (ISAT) is held every year. The Second Symposium (ISAT-2) was held on 1-2 October 2007 at the Awaji Yumebutai Conference Center, Awaji City, Japan presided by the `Atomic Technology Project'. The ISAT-2 symposium was intended to offer a forum for the discussion of the latest progress in atomic technologies. The symposium was attended by 106 delegates. There were 9 invited and 5 oral presentations. The number of poster presentations was 73. From all the contributions, 24 papers selected through review process are contained in this volume. The `Atomic Technology Project' was started in 2006 as a joint project of three institutions; (1) Center for Atomic and Molecular Technologies, Graduate School of Engineering, Osaka University (CAMT), (2) Tsukuba Research Center for Interdisciplinary Materials Science, Graduate School of Pure and Applied Sciences, University of Tsukuba (TIMS) and (3) Polyscale Technology Research Center, Research Institute for Science and Technology, Tokyo University of Science (PTRC), each of which were independently pursuing nano-technologies and were developing atomic scale operation and diagnostics, functional materials, micro processing and devices. The project is funded by the Ministry of Education, Culture, Sports, Science and Technology of Japan. The goal of the project is to contribute to the development of atomic-scale science and technologies such as functional molecules, biomaterials, and quantum functions of atomic-scale structures. Yasuharu Shirai Conference Chair Center for Atomic Technologies, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita-city, Osaka 565-0871, Japan. Conference photograph

  14. PREFACE: Fourth International Symposium on Atomic Technology

    Science.gov (United States)

    Okada, Shigefumi

    2010-04-01

    The International Symposium on Atomic Technology (ISAT) is held every year. The 4th Symposium (ISAT-4) was held on November 18-19, 2009 at the Seaside Hotel MAIKO VILLA KOBE, Kobe City, Japan presided by the "Atomic Technology Project". The ISAT-4 symposium was intended to offer a forum for the discussion on the latest progress in the atomic technologies. The symposium was attended by 107 delegates. There were 10 invited and 6 oral presentations. The number of poster presentations was 69. From all the contributions, 22 papers selected through review process are contained in this volume. The "Atomic Technology Project" was started in 2006 as a joint project of three institutions; (1) the Center for Atomic and Molecular Technologies, Graduate School of Engineering, Osaka University (CAMT), (2) the Tsukuba Research Center for Interdisciplinary Materials Science, Graduate School of Pure and Applied Sciences, University of Tsukuba (TIMS) and (3) the Polyscale Technology Research Center, Research Institute for Science and Technology, Tokyo University of Science (PTRC), each of which were independently pursuing nano-technologies and was developing atomic scale operation and diagnostics, functional materials, micro processing and device. The project is funded by the Ministry of Education, Culture, Sports, Science and Technology of Japan. The goal of the project is to contribute to the development of atomic-scale science and technologies such as functional molecules, biomaterials, and quantum functions of atomic-scale structures. Shigefumi Okada Conference Chair Center for Atomic and Molecular Technologies, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita-city, Osaka 565-0871, Japan. Conference photograph Kobe photograph

  15. International cooperation in cold forging technology

    DEFF Research Database (Denmark)

    Bay, Niels; Lange, K

    1992-01-01

    International cooperation in the field of cold forging technology started in 1961 by formation of the OECD Group of Experts on Metal Forming. In 1967 this group was transformed into the International Cold Forging Group, ICFG, an independent body which has now been operative for 25 years. Members...... by cooperative activities or by instigating national research. These subgroups have produced 9 data sheets and 7 guidelines on subjects such as materials, tool design and construction, calculation methods for cold forging tools, manufacture of slugs, lubrication aspects and small quantity production. Plenary...

  16. 7th International Conference on Sensing Technology

    CERN Document Server

    Mukhopadhyay, Subhas; Jayasundera, Krishanthi

    2015-01-01

    This book contains a collection of selected works stemming from the 2013 International Conference on Sensing Technology (ICST), which was held in Wellington, New Zealand. The purpose of the book is to distill the highlights of the conference, and therefore track the latest developments in sensing technologies. The book contents are broad, since sensors can be applied in many different areas. Therefore the book gives a broad overview of the latest developments, in addition to discussing the process through which researchers go through in order to develop sensors, or related systems, which will become more widespread in the future.The book is written for academic and industry professionals working in the field of sensing, instrumentation and related fields, and is positioned to give a snapshot of the current state of the art in sensing technology, particularly from the applied perspective. 

  17. International Journal of Engineering, Science and Technology: Site ...

    African Journals Online (AJOL)

    International Journal of Engineering, Science and Technology: Site Map. Journal Home > About the Journal > International Journal of Engineering, Science and Technology: Site Map. Log in or Register to get access to full text downloads.

  18. International Facility for Food Irradiation Technology

    International Nuclear Information System (INIS)

    Farkas, J.

    1982-01-01

    The International Facility for Food Irradiation Technology (IFFIT) was set up in November 1978 for a period of five years at the Pilot Plant for Food Irradiation, Wageningen, The Netherlands under an Agreement between the FAO, IAEA and the Ministry of Agriculture and Fisheries of the Government of the Netherlands. Under this Agreement, the irradiation facilities, office space and services of the Pilot Plant for Food Irradiation are put at IFFIT's disposal. Also the closely located Research Foundation, ITAL, provides certain facilities and laboratory services within the terms of the Agreement. The FAO and IAEA contribute US-Dollar 25,000. Annually for the duration of IFFIT. (orig.) [de

  19. International Congress on Information and Communication Technology

    CERN Document Server

    Bhatt, Yogesh; Joshi, Amit; Mishra, Durgesh

    2016-01-01

    This volume contains 69 papers presented at ICICT 2015: International Congress on Information and Communication Technology. The conference was held during 9th and 10th October, 2015, Udaipur, India and organized by CSI Udaipur Chapter, Division IV, SIG-WNS, SIG-e-Agriculture in association with ACM Udaipur Professional Chapter, The Institution of Engineers (India), Udaipur Local Centre and Mining Engineers Association of India, Rajasthan Udaipur Chapter. This volume contains papers mainly focused on ICT for Managerial Applications, E-governance, IOT and e-Mining.

  20. International Nuclear Science and Technology Conference 2016

    International Nuclear Information System (INIS)

    2017-01-01

    Conference Nuclear technology has played an important role in many aspects of our lives, including agriculture, medicine and healthcare, materials, environment, forensics, energy, and frontier advancement. The International Nuclear Science and Technology Conference (INST) aims to bring together scientists, engineers, academics and students to share knowledge and experiences about all aspects of nuclear sciences. INST2016 was the second of the INST conference series organized by Thailand Institute of Nuclear Technology. INST has evolved from a national conference series on nuclear science and technology that was held every two years in Bangkok for over a twenty-year period. INST2016 was held from 4 - 6 August 2016 in Bangkok, Thailand, under the central theme “Nuclear for Better Life”. The conference working language was English. The oral and poster research presentations covered seven major topics: • Nuclear physics and engineering (PHY) • Nuclear and radiation safety (SAF) • Medical and nutritional applications (MED) • Environmental applications (ENV) • Radiation processing and industrial applications (IND) • Agriculture and food applications (AGR) • Instrumentation and other related topics (INS) The welcome addresses, committees, program of the conference and the list of presentations can be found in the PDF. (paper)

  1. Overview of international fusion technology programs

    International Nuclear Information System (INIS)

    Coffman, F.E.; Baublitz, J.E.; Beard, D.S.; Cohen, M.M.; Dalder, E.N.C.; Finfgeld, C.R.; Haas, G.M.; Head, C.R.; Murphy, M.R.; Nardella, G.R.

    1979-01-01

    World fusion technology programs, as well as current progress and future plans for the U.S., are discussed. Regarding conceptual design, the international INTOR tokamak study, the Garching Ignition Test Reactor Study, the U.S. Engineering Test Facility conceptual design, the Argonne National Laboratory Commercial Tokamak Study, mirror conceptual designs, and alternate concepts and applications studies are summarized. With regard to magnetics, progress to date in the large coil program and pulsed coil program is summarized. In the area of plasma heating and fueling and exhaust, work on a new positive ion source research and development program at Lawrence Berkeley Laboratory and Oak Ridge National Laboratory is described, as is negative ion work. Tradeoff considerations for radio-frequency heating alternatives are made, and a new 60-100 GHz electron cyclotron heating research and development program is discussed. Progress and plans for solid hydrogen pellet injector development are analyzed, as are plans for a divertor technology initiative. A brief review of the U.S. alternate applications and environment and safety program is included

  2. International HR Strategy of Brazilian Technology Multinationals

    Directory of Open Access Journals (Sweden)

    Patricia Morilha Muritiba

    2010-10-01

    Full Text Available Four cases of Brazilian Multinationals from the information technology [IT] sector were compared in their international Human Resources strategy. The analysis is focused on the development and application of two research models. One analyzes the level of subsidiary autonomy in terms of strategic HR decisions, including difficult decisions regarding coordination in multinationals, following the theoretical approach of the autonomy of subsidiaries (Kidger, 2002; Nohria & Ghoshal, 1997. The other is related to the level of internationalization of HR strategies, defined as the capacity to take advantage of globalization, providing the best resources for the company regardless of where they are located (Sparrow, 2007. Both models were applied in a multiple case study method (Eisenhardt, 1989. Data were collected through semi-structured interviews and company reports, and analyzed through content analysis. The results show: (a a more centralizing characteristic of the multinational companies examined, despite the limitations of this choice as shown by the literature; and (b that Brazilian IT multinationals tend to rely more on their national competencies when managing human resources instead of going global to aggregate differentiated competencies.

  3. Assessing climate change mitigation technology interventions by international institutions

    DEFF Research Database (Denmark)

    de Coninck, Heleen; Puig, Daniel

    2015-01-01

    Accelerating the international use of climate mitigation technologies is key if effortsto curb climate change are to succeed, especially in developing countries, where weakdomestic technological innovation systems constrain the uptake of climate change mitigationtechnologies. Several intergovernm...

  4. Proceedings of SPIE - the International Society for Optical Engineering. Ocean Optics 12 Held in Bergen, Norway on 13-15 June 1994

    Science.gov (United States)

    1994-06-15

    conditions of mineral nutrition shortage,’ Moscow Univ. Physics Bulletrin, vol. 47(4), pp.47-53, 1992. 4. R.M. Greene, R.J. Geider, Z. Kolber, and P.O...substance formation by Mayar reaction between dissolved aminoacides and hydrocarbons after its transition from sinking dead phytoplankton cells into

  5. Sol-Gel Optics: Proceedings SPIE-The International Society for Optical Engineering Held in San Diego, California on 11-13 July 1990. Volume 1328

    Science.gov (United States)

    1992-03-01

    Bi2O 3 and TiO 2- CeO2 compositions M. A. Aegerter, E. R. La Serra, Univ. of Sao Paulo (Brazil); A. C. Martins Rodrigues, Univ. of Sao Carlos (Brazil); G...quite thin, imparting color to the film is acheived via scatterini efect: and not absorption. Yellow coatings of CeO2 -TiO 2 ndve beex. deposited on soda...distillation. Adding the inorganic acid to the slurry induced a gentle redispersion (peptization) of it into a fluid translucent suspension within a few hours at

  6. How Do Science and Technology Affect International Affairs?

    Science.gov (United States)

    Weiss, Charles

    2015-01-01

    Science and technology influence international affairs by many different mechanisms. Both create new issues, risks and uncertainties. Advances in science alert the international community to new issues and risks. New technological capabilities transform war, diplomacy, commerce, intelligence, and investment. This paper identifies six basic…

  7. Evaluating Internal Technological Capabilities in Energy Companies

    Directory of Open Access Journals (Sweden)

    Mingook Lee

    2016-03-01

    Full Text Available As global competition increases, technological capability must be evaluated objectively as one of the most important factors for predominance in technological competition and to ensure sustainable business excellence. Most existing capability evaluation models utilize either quantitative methods, such as patent analysis, or qualitative methods, such as expert panels. Accordingly, they may be in danger of reflecting only fragmentary aspects of technological capabilities, and produce inconsistent results when different models are used. To solve these problems, this paper proposes a comprehensive framework for evaluating technological capabilities in energy companies by considering the complex properties of technological knowledge. For this purpose, we first explored various factors affecting technological capabilities and divided the factors into three categories: individual, organizational, and technology competitiveness. Second, we identified appropriate evaluation items for each category to measure the technological capability. Finally, by using a hybrid approach of qualitative and quantitative methods, we developed an evaluation method for each item and suggested a method to combine the results. The proposed framework was then verified with an energy generation and supply company to investigate its practicality. As one of the earliest attempts to evaluate multi-faceted technological capabilities, the suggested model can support technology and strategic planning.

  8. Evaluating Internal Technological Capabilities in Energy Companies

    OpenAIRE

    Mingook Lee; Sungjoo Lee

    2016-01-01

    As global competition increases, technological capability must be evaluated objectively as one of the most important factors for predominance in technological competition and to ensure sustainable business excellence. Most existing capability evaluation models utilize either quantitative methods, such as patent analysis, or qualitative methods, such as expert panels. Accordingly, they may be in danger of reflecting only fragmentary aspects of technological capabilities, and produce inconsiste...

  9. Technology transfer and international development: Materials and manufacturing technology

    Science.gov (United States)

    1982-01-01

    Policy oriented studies on technological development in several relatively advanced developing countries were conducted. Priority sectors defined in terms of technological sophistication, capital intensity, value added, and export potential were studied in Brazil, Venezuela, Israel, and Korea. The development of technological policy alternatives for the sponsoring country is assessed. Much emphasis is placed on understanding the dynamics of the sectors through structured interviews with a large sample of firms in the leading manufacturing and materials processing sectors.

  10. Strategic issues in information technology international implications for decision makers

    CERN Document Server

    Schütte, Hellmut

    1988-01-01

    Strategic Issues in Information Technology: International Implications for Decision Makers presents the significant development of information technology in the output of components, computers, and communication equipment and systems. This book discusses the integration of information technology into factories and offices to increase productivity.Organized into six parts encompassing 12 chapters, this book begins with an overview of the advancement towards an automated interpretation communication system to achieve real international communication. This text then examines the main determining

  11. History of the international societies in health technology assessment: International Society for Technology Assessment in Health Care and Health Technology Assessment International.

    Science.gov (United States)

    Banta, David; Jonsson, Egon; Childs, Paul

    2009-07-01

    The International Society for Technology Assessment in Health Care (ISTAHC) was formed in 1985. It grew out of the increasing awareness of the international dimensions of health technology assessment (HTA) and the need for new communication methods at the international level. The main function of ISTAHC was to present an annual conference, which gradually grew in size, and also to generally improve in quality from to year. ISTAHC overextended itself financially early in the first decade of the 2000s and had to cease its existence. A new society, Health Technology Assessment international (HTAi), based on many of the same ideas and people, grew up beginning in the year 2003. The two societies have played a large role in making the field of HTA visible to people around the world and providing a forum for discussion on the methods and role of HTA.

  12. Proceedings of the Twelfth International Symposium on Space Terahertz Technology

    Science.gov (United States)

    Mehdi, Imran (Editor)

    2001-01-01

    The Twelfth International Symposium on Space Terahertz Technology was held February 14-16, 2001 in San Diego, California, USA. This symposium was jointly sponsored by the National Aeronautics and Space Administration (NASA) and the Jet Propulsion Laboratory, California Institute of Technology. The symposium featured sixty nine presentations covering a wide variety of technical topics relevant to Terahertz Technology. The presentations can be divided into five broad technology areas: Hot Electron Bolometers, superconductor insulator superconductor (SIS) technology, local oscillator (LO) technology, Antennas and Measurements, and Direct Detectors. The symposium provides scientists, engineers, and researchers working in the terahertz technology and science fields to engineers their work and exchange ideas with colleagues.

  13. New nuclear technology; International developments. Review 1995

    International Nuclear Information System (INIS)

    Devell, L.; Aggeryd, I.; Hultgren, Aa.; Lundell, B.; Pedersen, T.

    1995-09-01

    A summary review of the development of new nuclear rector technology is presented in this report. Fuel cycle strategies and waste handling developments are also commented. Different plans for dismantling nuclear weapons are presented. 18 refs

  14. First international ash marketing and technology conference

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-01

    A total of 42 papers were presented in sessions with the following headings: production and disposal of ash - an international review; environmental, health, safety, and legal aspects of ash handling; marketing of ash; development of new uses for ash; cementitious use of ash; ash in manufactured products; and geotechnical uses of ash.

  15. International Journal of Engineering, Science and Technology

    African Journals Online (AJOL)

    journal is an international peer-reviewed, electronic, online journal published by MultiCraft. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research ...

  16. International Conference on Information Technology and Agricultural Engineering (ICITAE 2011)

    CERN Document Server

    Sambath, Sabo; Information Technology and Agricultural Engineering

    2012-01-01

    This volume comprises the papers from 2011 International Conference on Information Technology and Agricultural Engineering (ICITAE 2011).  2011 International Conference on Information Technology and Agricultural Engineering (ICITAE 2011) has been held in Sanya, China, December 1-2, 2011. All the papers have been peer reviewed by the selected experts. These papers represent the latest development in the field of materials manufacturing technology, spanning from the fundamentals to new technologies and applications. Specially, these papers cover the topics of Information Technology and Agricultural Engineering. This book provides a greatly valuable reference for researchers in the field of Information Technology and Agricultural Engineering who wish to further understand the underlying mechanisms and create innovative and practical techniques, systems and processes. It should also be particularly useful for engineers in information technology and agriculture who are responsible for the efficient and effective ...

  17. Proceedings of the international workshop on spallation materials technology

    Energy Technology Data Exchange (ETDEWEB)

    Mansur, L.K.; Ullmaier, H. [comps.

    1996-10-01

    This document contains papers which were presented at the International Workshop on Spallation Materials Technology. Topics included: overviews and thermal response; operational experience; materials experience; target station and component design; particle transport and damage calculations; neutron sources; and compatibility.

  18. Proceedings of the international workshop on spallation materials technology

    International Nuclear Information System (INIS)

    Mansur, L.K.; Ullmaier, H.

    1996-01-01

    This document contains papers which were presented at the International Workshop on Spallation Materials Technology. Topics included: overviews and thermal response; operational experience; materials experience; target station and component design; particle transport and damage calculations; neutron sources; and compatibility

  19. International vs. domestic technology in-licensing: How do Chinese firms build their technological capabilities?

    DEFF Research Database (Denmark)

    Li, Ying; Wang, Yuandi

    2011-01-01

    attention in the extant literature on both innovation management and international business. However, little has been done to reach a clear understanding on whether Chinese firms can benefit from international or domestic technology in-licensing and improve their own technological capabilities. This study......This paper investigates the different impacts of international and domestic technology in-licensing for Chinese firms as licensees on their technological capability building. The evolution of firms in developing countries and development of their technological capabilities has received increasing......, therefore, pursues this endeavor by using a unique dataset from China State of Intellectual Property Office (SIPO) containing information on large Chinese firms. The findings of this empirical study indicate that firms with international technology in-licensing possess stronger technological innovation...

  20. Global power knowledge science and technology in international affairs

    CERN Document Server

    Barth, Kai-Henrik

    2006-01-01

    Osiris annualy examines a particular topic in the history of science, bringing together experts in the field to consider multiple aspects of the time period, episode, or theme. Volume 21, Historical Perspectives on Science, Technology, and International Affairs, explores the ways in which scientists and issues in science and technology have played significant roles in foreign policy and international relations, especially since the Second World War.

  1. The evolving role of information technology in internal auditing

    OpenAIRE

    2015-01-01

    M.Com. (Computer Auditing) Modern organizations are increasingly dependent on information technology (IT) for various reasons: to enhance their operational efficiency, reduce costs or even attain a competitive advantage. The role of information technology in the organization continues to evolve and this has an impact for the internal audit functions that serve these organizations. The study investigated whether the King III report, ISACA standards and IIA standards assist the internal audi...

  2. 2013 International Symposium on Optomechatronic Technologies

    CERN Document Server

    Cho, Young-June; Wang, Wei-Chih; Cho, Hyungsuck

    2014-01-01

    Optomechatronics, as a fusion of optical and mechatronic engineering, have played a key role in developing innovative products such as high precision instruments, defence, photonic systems, measurements, diagnostics, semiconductors, and so on. And optomechatronics technologies have greatly contributed to the state of the art industries in optics design, manufacturing, optical imaging, metrology, and other applications. This book covers a multitude of optomechatronics advantages and solutions. It includes 20 contributions featuring laser and fiber optics, nitride semiconductors, LIDAR technology, machine vision, optical imaging, micro optoelectro mechanical systems, optical metrology, optical-based sensors and actuators, optomechatronics for microscopes, optical pattern and fiber, optomechatronics for bio-medical applications, optomechatronics for manufacturing applications, robotics for micro and nano scales, and other applications. As revised and extended versions, the contributed articles are selected from ...

  3. Advanced manufacturing: Technology and international competitiveness

    Energy Technology Data Exchange (ETDEWEB)

    Tesar, A.

    1995-02-01

    Dramatic changes in the competitiveness of German and Japanese manufacturing have been most evident since 1988. All three countries are now facing similar challenges, and these challenges are clearly observed in human capital issues. Our comparison of human capital issues in German, Japanese, and US manufacturing leads us to the following key judgments: Manufacturing workforces are undergoing significant changes due to advanced manufacturing technologies. As companies are forced to develop and apply these technologies, the constituency of the manufacturing workforce (especially educational requirements, contingent labor, job content, and continuing knowledge development) is being dramatically and irreversibly altered. The new workforce requirements which result due to advanced manufacturing require a higher level of worker sophistication and responsibility.

  4. 7th International Conference on Sensing Technology

    CERN Document Server

    Mukhopadhyay, Subhas; Jayasundera, Krishanthi

    2015-01-01

    This book is written for academic and industry professionals working in the field of sensing, instrumentation and related fields, and is positioned to give a snapshot of the current state of the art in sensing technology, particularly from the applied perspective. The book is intended to give broad overview of the latest developments, in addition to discussing the process through which researchers go through in order to develop sensors, or related systems, which will become more widespread in the future.

  5. AFRREV STECH: An International Journal of Science and Technology

    African Journals Online (AJOL)

    STECH: An International Journal of Science and Technology is a peer-reviewed journal of interdisciplinary scientific research, theories, and observations. STECH is a semi-annual publication of International Association of African Researchers and Reviewers (IAARR). The mission of this journal is to provide a platform for ...

  6. 3rd International Conference on Intelligent Technologies and Engineering Systems

    CERN Document Server

    2016-01-01

    This book includes the original, peer reviewed research from the 3rd International Conference on Intelligent Technologies and Engineering Systems (ICITES2014), held in December, 2014 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: Automation and robotics, fiber optics and laser technologies, network and communication systems, micro and nano technologies, and solar and power systems. This book also Explores emerging technologies and their application in a broad range of engineering disciplines Examines fiber optics and laser technologies Covers biomedical, electrical, industrial, and mechanical systems Discusses multimedia systems and applications, computer vision and image & video signal processing.

  7. Institutional Distance and Partner Selection in International Technological Alliances

    NARCIS (Netherlands)

    Krammer, Marius

    2013-01-01

    This study posits that institutional distance has a negative influence on partner selection in international technological alliances. Empirical results based on a dataset of firms in the global tire industry confirm that firms prefer technological partners from closer cognitive, normative and

  8. Research Needs for Technology Education: An International Perspective

    Science.gov (United States)

    Ritz, John M.; Martin, Gene

    2013-01-01

    These authors report the findings of a study that sought to determine the most relevant research issues needed to be studied by the technology education profession. It used an international panel of experts to develop a list of important research issues for the school subject of technology education and for the preparation of teachers to better…

  9. STEM and Technology Education: International State-of-the-Art

    Science.gov (United States)

    Ritz, John M.; Fan, Szu-Chun

    2015-01-01

    This paper reports the perceptions of 20 international technology education scholars on their country's involvement in science, technology, engineering, and mathematics (STEM) education. Survey research was used to obtain data. It was found that the concept of STEM education is being discussed differently by nations. Some consider STEM education…

  10. Computers and terminals as an aid to international technology transfer

    Science.gov (United States)

    Sweeney, W. T.

    1974-01-01

    As technology transfer becomes more popular and proves to be an economical method for companies of all sizes to take advantage of a tremendous amount of new and available technology from sources all over the world, the introduction of computers and terminals into the international technology transfer process is proving to be a successful method for companies to take part in this beneficial approach to new business opportunities.

  11. The international handbook of space technology

    CERN Document Server

    Badescu, Viorel

    2014-01-01

    This comprehensive handbook provides an overview of space technology and a holistic understanding of the system-of-systems that is a modern spacecraft. With a foreword by Elon Musk, CEO and CTO of SpaceX, and contributions from globally leading agency experts from NASA, ESA, JAXA, and CNES, as well as European and North American academics and industrialists, this handbook, as well as giving an interdisciplinary overview, offers, through individual self-contained chapters, more detailed understanding of specific fields, ranging through: ·         Launch systems, structures, power, thermal, communications, propulsion, and software, to ·         entry, descent and landing, ground segment, robotics, and data systems, to ·         technology management, legal and regulatory issues, and project management. This handbook is an equally invaluable asset to those on a career path towards the space industry as it is to those already within the industry.

  12. International Conference on Computers and Advanced Technology in Education

    CERN Document Server

    Advanced Information Technology in Education

    2012-01-01

    The volume includes a set of selected papers extended and revised from the 2011 International Conference on Computers and Advanced Technology in Education. With the development of computers and advanced technology, the human social activities are changing basically. Education, especially the education reforms in different countries, has been experiencing the great help from the computers and advanced technology. Generally speaking, education is a field which needs more information, while the computers, advanced technology and internet are a good information provider. Also, with the aid of the computer and advanced technology, persons can make the education an effective combination. Therefore, computers and advanced technology should be regarded as an important media in the modern education. Volume Advanced Information Technology in Education is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of computers and advanced technology in education to d...

  13. International Collaboration Patterns and Effecting Factors of Emerging Technologies.

    Science.gov (United States)

    Bai, Xu; Liu, Yun

    2016-01-01

    With the globalization of the world economy, international innovation collaboration has taken place all over the world. This study selects three emerging technologies (3D printing, big data and carbon nanotubes and graphene technology) among 20 countries as the research objects, using three patent-based indicators and network relationship analysis to reflect international collaboration patterns. Then we integrate empirical analyses to show effecting factors of international collaboration degrees by using panel data. The results indicate that while 3D printing technology is associated with a "balanced collaboration" mode, big data technology is more accurately described by a radial pattern, centered on the United States, and carbon nanotubes and graphene technology exhibits "small-world" characteristics in this respect. It also shows that the factors GDP per capita (GPC), R&D expenditure (RDE) and the export of global trade value (ETV) negatively affect the level of international collaboration. It could be useful for China and other developing countries to make international scientific and technological collaboration strategies and policies in the future.

  14. International Collaboration Patterns and Effecting Factors of Emerging Technologies.

    Directory of Open Access Journals (Sweden)

    Xu Bai

    Full Text Available With the globalization of the world economy, international innovation collaboration has taken place all over the world. This study selects three emerging technologies (3D printing, big data and carbon nanotubes and graphene technology among 20 countries as the research objects, using three patent-based indicators and network relationship analysis to reflect international collaboration patterns. Then we integrate empirical analyses to show effecting factors of international collaboration degrees by using panel data. The results indicate that while 3D printing technology is associated with a "balanced collaboration" mode, big data technology is more accurately described by a radial pattern, centered on the United States, and carbon nanotubes and graphene technology exhibits "small-world" characteristics in this respect. It also shows that the factors GDP per capita (GPC, R&D expenditure (RDE and the export of global trade value (ETV negatively affect the level of international collaboration. It could be useful for China and other developing countries to make international scientific and technological collaboration strategies and policies in the future.

  15. International Collaboration Patterns and Effecting Factors of Emerging Technologies

    Science.gov (United States)

    Bai, Xu; Liu, Yun

    2016-01-01

    With the globalization of the world economy, international innovation collaboration has taken place all over the world. This study selects three emerging technologies (3D printing, big data and carbon nanotubes and graphene technology) among 20 countries as the research objects, using three patent-based indicators and network relationship analysis to reflect international collaboration patterns. Then we integrate empirical analyses to show effecting factors of international collaboration degrees by using panel data. The results indicate that while 3D printing technology is associated with a “balanced collaboration” mode, big data technology is more accurately described by a radial pattern, centered on the United States, and carbon nanotubes and graphene technology exhibits “small-world” characteristics in this respect. It also shows that the factors GDP per capita (GPC), R&D expenditure (RDE) and the export of global trade value (ETV) negatively affect the level of international collaboration. It could be useful for China and other developing countries to make international scientific and technological collaboration strategies and policies in the future. PMID:27911926

  16. An outline of military technological dynamics as restraints for acquisition, international cooperation and domestic technological development

    Directory of Open Access Journals (Sweden)

    Édison Renato Silva

    2014-12-01

    Full Text Available The expectation that technological returns from defense expenditure through acquisition, international cooperation and domestic research would further national development underappreciates the different technological dynamic of the armed services. This paper outlines the technological dynamic the stems from fighting in the air, at sea and on land, exemplifying consequences for the case of acquisition.

  17. 2nd International Conference on Mobile and Wireless Technology

    CERN Document Server

    Wattanapongsakorn, Naruemon

    2015-01-01

    This book provides a snapshot of the current state-of-the-art in the fields of mobile and wireless technology, security and applications.  The proceedings of the 2nd International Conference on Mobile and Wireless Technology (ICMWT2015), it represents the outcome of a unique platform for researchers and practitioners from academia and industry to share cutting-edge developments in the field of mobile and wireless science technology, including those working on data management and mobile security.   The contributions presented here describe the latest academic and industrial research from the international mobile and wireless community.  The scope covers four major topical areas: mobile and wireless networks and applications; security in mobile and wireless technology; mobile data management and applications; and mobile software.  The book will be a valuable reference for current researchers in academia and industry, and a useful resource for graduate-level students working on mobile and wireless technology...

  18. INFORMATION AND COMMUNICATION TECHNOLOGIES TRAINING: CRITERIA FOR INTERNAL QUALITY ASSESSMENT

    Directory of Open Access Journals (Sweden)

    Oleg M. Spirin

    2011-02-01

    Full Text Available In the article the concept of information and communication technology training is specified. It is grounded an internal criteria of information and communication technologies training quality assessment based on experience of the organization, carrying out, analysis of experimental work results on quality assessment of designing, working out, efficiency of methodical system of informatics teachers base vocational training introduction in the conditions of credit-modular technology. Indicators and approaches of their assessment to define the criteria degree are resulted. Indicators of criteria "level differentiation", "individualization" and "intensification" of educational process for information and communication technologies training quality assessment are specified.

  19. On the Teaching of Science, Technology and International Affairs.

    Science.gov (United States)

    Weiss, Charles

    2012-03-01

    Despite the ubiquity and critical importance of science and technology in international affairs, their role receives insufficient attention in traditional international relations curricula. There is little literature on how the relations between science, technology, economics, politics, law and culture should be taught in an international context. Since it is impossible even for scientists to master all the branches of natural science and engineering that affect public policy, the learning goals of students whose primary training is in the social sciences should be to get some grounding in the natural sciences or engineering, to master basic policy skills, to understand the basic concepts that link science and technology to their broader context, and to gain a respect for the scientific and technological dimensions of the broader issues they are addressing. They also need to cultivate a fearless determination to master what they need to know in order to address policy issues, an open-minded but skeptical attitude towards the views of dueling experts, regardless of whether they agree with their politics, and (for American students) a world-view that goes beyond a strictly U.S. perspective on international events. The Georgetown University program in Science, Technology and International Affairs (STIA) is a unique, multi-disciplinary undergraduate liberal arts program that embodies this approach and could be an example that other institutions of higher learning might adapt to their own requirements.

  20. International political communication and influence of information and communication technologies on contemporary international relations

    Directory of Open Access Journals (Sweden)

    Vranješ Aleksandar

    2017-01-01

    Full Text Available International political communication can be seen as an auxiliary but also constitutive discipline of the International relations in the wider field of the Political science. At the very core of International relations is Political communication through which the most important actors of world politics realize political goals. This paper presents a short genesis of the development of the International political communication and relation to the International relations. The key terms have been defined, the most important theories have been given and today's global character of International communication has been highlighted. The changes in International politics were analyzed as the consequence of the information and communication revolution and the emergence of modern Information and communication technologies that change the very nature of International relations. An overview of the new communication technologies impact on the main actors (subjects/entities of International relations was made, thus analyzing the impact of this factor on both state and non-state actors. We looked back at the impact of information and communication technologies on an individual who, thanks to the global communications network, became a real actor of world politics. There is also a section of the main theories of International relations and their relation to the challenges brought by the Informatics revolution (IT revolution and the Digital age.

  1. 2015 International Conference on Information Technology and Intelligent Transportation Systems

    CERN Document Server

    Jain, Lakhmi; Zhao, Xiangmo

    2017-01-01

    This volume includes the proceedings of the 2015 International Conference on Information Technology and Intelligent Transportation Systems (ITITS 2015) which was held in Xi’an on December 12-13, 2015. The conference provided a platform for all professionals and researchers from industry and academia to present and discuss recent advances in the field of Information Technology and Intelligent Transportation Systems. The presented information technologies are connected to intelligent transportation systems including wireless communication, computational technologies, floating car data/floating cellular data, sensing technologies, and video vehicle detection. The articles focusing on intelligent transport systems vary in the technologies applied, from basic management systems to more application systems including topics such as emergency vehicle notification systems, automatic road enforcement, collision avoidance systems and some cooperative systems. The conference hosted 12 invited speakers and over 200 part...

  2. International Conference on Advances in Information and Communication Technology

    CERN Document Server

    Nguyen, Thanh-Thuy; Vu, Duc-Thai; Phung, Trung-Nghia; Huynh, Van-Nam

    2017-01-01

    This book features papers presented at the International Conference on Advances in Information and Communication Technology (ICTA 2016), which was held in Thai Nguyen city, Vietnam, from December 1 to 13, 2016. The conference was jointly organized by Thai Nguyen University of Information and Communication Technology (ICTU), the Institute of Information Technology – Vietnam Academy of Science and Technology (IoIT), Feng Chia University, Taiwan (FCU), the Japan Advanced Institute of Science and Technology (JAIST) and the National Chung Cheng University, Taiwan (CCU) with the aim of bringing together researchers, academics, practitioners and students to not only share research results and practical applications but also to foster collaboration in information and communication technology research and education. The book includes the 66 best peer-reviewed papers, selected from the 150 submissions received.

  3. Advances in Technology and Management : Proceedings of the 2012 International Conference on Technology and Management

    CERN Document Server

    2012-01-01

    This book Advances in Technology and Management contains 116 full length papers presented at the International Conference on Technology and Management, held on June 12-13, 2012, Jeju-Island, Korea. The goal of ICTAM 2012 is to bring together researchers working in many different areas of technology and management to foster international collaborations and exchange of new ideas.   This volume can be divided into two sections on the basis of the classification of manuscripts considered. The first section deals with technology. The second section of this volume consists of management.

  4. International Conference on Information and Communication Technology for Intelligent Systems

    CERN Document Server

    Das, Swagatam

    2016-01-01

    This volume contains 60 papers presented at ICTIS 2015: International Conference on Information and Communication Technology for Intelligent Systems. The conference was held during 28th and 29th November, 2015, Ahmedabad, India and organized communally by Venus International College of Technology, Association of Computer Machinery, Ahmedabad Chapter and Supported by Computer Society of India Division IV – Communication and Division V – Education and Research. This volume contains papers mainly focused on ICT and its application for Intelligent Computing, Cloud Storage, Data Mining, Image Processing and Software Analysis etc.

  5. 2nd Karlsruhe International Summer School on Fusion Technologies

    International Nuclear Information System (INIS)

    Bahm, W.; Stycz, K.

    2008-01-01

    For the second time, the Karlsruhe Research enter together with European research institutions and industries invited young scientists and engineers to its ''International Summer School on Fusion Technologies.'' Fifty participants from all over Europe attended the lectures by 35 experts preesenting contributions from their areas of competence. Ten young scientists from India and another 10 from China were connected to the events by video link. Physics student Kornelia Stycz describes her impressions as a participant in the ''2 nd International Summer School on Fusion Technologies.'' (orig.)

  6. Assessment of international remedial technologies for application to Superfund sites

    International Nuclear Information System (INIS)

    Sanning, D.E.

    1990-01-01

    This paper presents some of the logical arguments for conducting research on remedial technologies for contaminated land and groundwater at an international level. It gives information on many of the international organizations that are involved in environmental programs, but it especially gives emphasis to the NATO-CCMS pilot study on Demonstration of Remedial Action Technologies for Contaminated Land and Groundwater. The purpose of the study is to field demonstrate and evaluate new/innovative technologies for remedial action at uncontrolled hazardous waste sites. This study is a logical international extension of the US EPA SITE program. It offers the opportunity to obtain a multiple data base on various remedial action unit processes without any single country having to commit a disproportionate amount of its internal resources to any specific activity. Each participating country provides the necessary resources for those demonstrations which they are contributing to the study. Sites are selected by a majority vote of all participating countries (no country is permitted to vote for its own sites). The study is a 5 year program with participants from Canada, Denmark, Federal Republic of Germany, France, Greece, Italy, Japan, the Netherlands, Norway, Spain, and the US. The need for cost-effective remedial action technologies for hazardous waste sites is a problem of all industrialized countries. The need to build a knowledge base of emerging remedial technologies was the impetus behind the USEPA's lead role and commitment to this pilot study

  7. Science, technology, autonomy, and dependence: a framework for international debate

    Energy Technology Data Exchange (ETDEWEB)

    Morehouse, W.

    1979-01-01

    The role of science and technology in the international system has changed markedly in the past 30 years. Science and technology have emerged as primary instruments of power and social control, with the major industrialized countries, especially the superpowers, relying more and more on science and technology as a means of maintaining their dominance in that system. The technological gap between the North and the South has widened during this period. Development strategies, relying on importation of capital-intensive, socially inappropriate, environmentally destructive Western technologies will lead to a massive global equity crisis in the 1980s. These technologies have been at the heart of the accelerating de-industrialization of the Third World by the First and Second Worlds on a scale far beyond what occurred in historical colonialism. The critical need is to focus the debate at the forthcoming world conferences on these underlying issues, leading to the formulation of concrete action proposals at the national and international levels which will effectively promote the technological autonomy of the Third World. While we cannot be certain that greater autonomy will lad to greater equity, few Southern countries can go very far in meeting the minimum material needs of most, not to speak all, of their people without a greatly strengthened autonomous capacity for creating, acquiring, adapting, and using technology to solve their own urgent economic and social problems.

  8. International Conference on Intelligent Technologies and Engineering System (ICITES 2012)

    CERN Document Server

    Huang, Yi-Cheng; Intelligent Technologies and Engineering Systems

    2013-01-01

    This book concentrates on intelligent technologies as it relates to engineering systems. The book covers the following topics: networking, signal processing, artificial intelligence, control and software engineering, intelligent electronic circuits and systems, communications, and materials and mechanical engineering. The book is a collection of original papers that have been reviewed by technical editors. These papers were presented at the International Conference on Intelligent Technologies and Engineering Systems, held Dec. 13-15, 2012.

  9. 2nd International Conference on Intelligent Technologies and Engineering Systems

    CERN Document Server

    Chen, Cheng-Yi; Yang, Cheng-Fu

    2014-01-01

    This book includes the original, peer reviewed research papers from the 2nd International Conference on Intelligent Technologies and Engineering Systems (ICITES2013), which took place on December 12-14, 2013 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: laser technology, wireless and mobile networking, lean and agile manufacturing, speech processing, microwave dielectrics, intelligent circuits and systems, 3D graphics, communications, and structure dynamics and control.

  10. 3rd International Conference on Computer & Communication Technologies

    CERN Document Server

    Bhateja, Vikrant; Raju, K; Janakiramaiah, B

    2017-01-01

    The book is a compilation of high-quality scientific papers presented at the 3rd International Conference on Computer & Communication Technologies (IC3T 2016). The individual papers address cutting-edge technologies and applications of soft computing, artificial intelligence and communication. In addition, a variety of further topics are discussed, which include data mining, machine intelligence, fuzzy computing, sensor networks, signal and image processing, human-computer interaction, web intelligence, etc. As such, it offers readers a valuable and unique resource.

  11. International Conference on Emerging Trends in Science, Engineering and Technology

    CERN Document Server

    Caroline, B; Jayanthi, J

    2012-01-01

    The present book is based on the research papers presented in the International Conference on Emerging Trends in Science, Engineering and Technology 2012, held at Tiruchirapalli, India. The papers presented bridges the gap between science, engineering and technology. This book covers a variety of topics, including mechanical, production, aeronautical, material science, energy, civil and environmental energy, scientific management, etc. The prime objective of the book is to fully integrate the scientific contributions from academicians, industrialists and research scholars.

  12. International Conference on Systems, Control and Information Technologies 2016

    CERN Document Server

    Kaliczyńska, Małgorzata

    2017-01-01

    This book presents the proceedings of the International Conference on Systems, Control and Information Technologies 2016. It includes research findings from leading experts in the fields connected with INDUSTRY 4.0 and its implementation, especially: intelligent systems, advanced control, information technologies, industrial automation, robotics, intelligent sensors, metrology and new materials. Each chapter offers an analysis of a specific technical problem followed by a numerical analysis and simulation as well as the implementation for the solution of a real-world problem.

  13. Fusion Technologies: 2nd Karlsruhe International Summer School

    International Nuclear Information System (INIS)

    Bahm, W.

    2008-01-01

    Nuclear fusion promises to deliver a future non-polluting energy supply with nearly unlimited fuel reserves. To win young scientists and engineers for nuclear fusion, the Karlsruhe Research Center, together with other partners in the European Fusion Education Network being established by the European Commission, organizes the 2nd Karlsruhe International Summer School on Fusion Technologies on September 1-12, 2008. The program covers all key technologies necessary for construction and operation of a fusion reactor. (orig.)

  14. International energy technology collaboration and climate change mitigation. Case study 1. Concentrating Solar Power Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Philibert, C. [Energy and Environment Division, International Energy Agency IEA, Paris (France)

    2004-07-01

    Mitigating climate change and achieving stabilisation of greenhouse gas atmospheric concentrations will require deep reductions in global emissions of energy-related carbon dioxide emissions. Developing and disseminating new, low-carbon energy technology will thus be needed. Two previous AIXG papers have focused on possible drivers for such a profound technological change: Technology Innovation, Development and Diffusion, released in June 2003, and International Energy Technology Collaboration and Climate Change Mitigation, released in June 2004. The first of these papers assesses a broad range of technical options for reducing energy-related CO2 emissions. It examines how technologies evolve and the role of research and development efforts, alternative policies, and short-term investment decisions in making long-term options available. It considers various policy tools that may induce technological change, some very specific, and others with broader expected effects. Its overall conclusion is that policies specifically designed to promote technical change, or 'technology push', could play a critical role in making available and affordable new energy technologies. However, such policies would not be sufficient to achieve the Convention's objective in the absence of broader policies. First, because there is a large potential for cuts that could be achieved in the short run with existing technologies; and second, the development of new technologies requires a market pull as much as a technology push. The second paper considers the potential advantages and disadvantages of international energy technology collaboration and transfer for promoting technological change. Advantages of collaboration may consist of lowering R and D costs and stimulating other countries to invest in R and D; disadvantage may include free-riding and the inefficiency of reaching agreement between many actors. This paper sets the context for further discussion on the role of

  15. Specificity of continuous auditing approach on information technology internal controls

    Directory of Open Access Journals (Sweden)

    Kaćanski Slobodan

    2012-01-01

    Full Text Available Contemporary business world, can not be imagined without the use of information technology in all aspects of business. The use of information technology in manufacturing and non-production companies' activities can greatly facilitate and accelerate the process of operation and control. Because of its complexity, they possess vulnerable areas and provide space for the emergence of accidental and intentional frauds that can significantly materially affect the business decisions made by the companies' management. Implementation of internal controls can greatly reduce the level of errors that can contribute to making the wrong decisions. In order to protect the operating system, the company's management implement an internal audit to periodically examine the fundamental quality of the internal control systems. Since the internal audit, according to its character, only periodically checks quality of internal control systems and information technologies to be reported to the manager, the problem arises in the process of in wrong time reporting the management structures of the business entity. To eliminate this problem, management implements a special approach to internal audit, called continuous auditing.

  16. STAIF96: space technology and applications international forum. Proceedings

    International Nuclear Information System (INIS)

    El-Genk, M.S.

    1996-01-01

    These proceedings represent papers presented at the Space Technology and Applications International Forum-STAIF. STAIF-96 hosted four technical conferences sharing the common interest in space exploration, technology, and commercialization. Topics discussed include space station, space transportation, materials processing in space, commercial forum, space power, commercial space ports, microelectronics, automation of robotics-space application, remote sensing, small business innovative research and communications. There were 243 papers presented at the forum, and 138 have been abstracted for the Energy Science and Technology database. STAIF-96 was partly sponsored by the U.S. Department of Energy

  17. Second International Symposium on Magnetic Suspension Technology, part 2

    Science.gov (United States)

    Groom, Nelson J. (Editor); Britcher, Colin P. (Editor)

    1994-01-01

    In order to examine the state of technology of all areas of magnetic suspension and to review related recent developments in sensors and controls approaches, superconducting magnet technology, and design/implementation practices, the 2nd International Symposium on Magnetic Suspension Technology was held at the Westin Hotel in Seattle, WA, on 11-13 Aug. 1993. The symposium included 18 technical sessions in which 44 papers were presented. The technical sessions covered the areas of bearings, bearing modelling, controls, vibration isolation, micromachines, superconductivity, wind tunnel magnetic suspension systems, magnetically levitated trains (MAGLEV), rotating machinery and energy storage, and applications. A list of attendees appears at the end of the document.

  18. 9th International Conference on Advanced Computing & Communication Technologies

    CERN Document Server

    Mandal, Jyotsna; Auluck, Nitin; Nagarajaram, H

    2016-01-01

    This book highlights a collection of high-quality peer-reviewed research papers presented at the Ninth International Conference on Advanced Computing & Communication Technologies (ICACCT-2015) held at Asia Pacific Institute of Information Technology, Panipat, India during 27–29 November 2015. The book discusses a wide variety of industrial, engineering and scientific applications of the emerging techniques. Researchers from academia and industry present their original work and exchange ideas, information, techniques and applications in the field of Advanced Computing and Communication Technology.

  19. Second International Symposium on Magnetic Suspension Technology, part 1

    Science.gov (United States)

    Groom, Nelson J. (Editor); Britcher, Colin P. (Editor)

    1994-01-01

    In order to examine the state of technology of all areas of magnetic suspension and to review related recent developments in sensors and controls approaches, superconducting magnet technology, and design/implementation practices, the Second International Symposium on Magnetic Suspension Technology was held. The symposium included 18 technical sessions in which 44 papers were presented. The technical sessions covered the areas of bearings, bearing modeling, controls, vibration isolation, micromachines, superconductivity, wind tunnel magnetic suspension systems, magnetically levitated trains (MAGLEV), rotating machinery and energy storage, and applications. A list of attendees appears at the end of the document.

  20. 1st International Conference on Data Engineering and Communication Technology

    CERN Document Server

    Bhateja, Vikrant; Joshi, Amit

    2017-01-01

    This two-volume book contains research work presented at the First International Conference on Data Engineering and Communication Technology (ICDECT) held during March 10–11, 2016 at Lavasa, Pune, Maharashtra, India. The book discusses recent research technologies and applications in the field of Computer Science, Electrical and Electronics Engineering. The aim of the Proceedings is to provide cutting-edge developments taking place in the field data engineering and communication technologies which will assist the researchers and practitioners from both academia as well as industry to advance their field of study.

  1. The 9th international conference on computing and information technology

    CERN Document Server

    Unger, Herwig; Boonkrong, Sirapat; IC2IT2013

    2013-01-01

    This volume contains the papers of the 9th International Conference on Computing and Information Technology (IC2IT 2013) held at King Mongkut's University of Technology North Bangkok (KMUTNB), Bangkok, Thailand, on May 9th-10th, 2013. Traditionally, the conference is organized in conjunction with the National Conference on Computing and Information Technology, one of the leading Thai national events in the area of Computer Science and Engineering. The conference as well as this volume is structured into 3 main tracks on Data Networks/Communication, Data Mining/Machine Learning, and Human Interfaces/Image processing.  

  2. 11th International Conference on Computing and Information Technology

    CERN Document Server

    Meesad, Phayung; Boonkrong, Sirapat

    2015-01-01

    This book presents recent research work and results in the area of communication and information technologies. The book includes the main results of the 11th International Conference on Computing and Information Technology (IC2IT) held during July 2nd-3rd, 2015 in Bangkok, Thailand. The book is divided into the two main parts Data Mining and Machine Learning as well as Data Network and Communications. New algorithms and methods of data mining asr discussed as well as innovative applications and state-of-the-art technologies on data mining, machine learning and data networking.

  3. Development of International Education at Suzuka National College of Technology

    Science.gov (United States)

    Hanai, Takaaki; Kuwabara, Hirofumi; Kondo, Kunikazu; Minoura, Hirohito; Ito, Akira; Kondo, Kazuyuki; Ezaki, Hisakazu; Kawaguchi, Masashi; Inoue, Tetsuo; Lawson, Michael E.

    One of the educational goals of the Advanced Engineering Faculty of Suzuka National College of Technology is to instill in graduates the ability required to become an internationally engaged engineers. To help realize this goal a project oriented toward the development of an international internship or an international cooperative education (Co-op) system was planned and implemented for the past three years. In this paper the results of investigations concerning the present state of Co-op in the United States and Canada, a tentative international internship at a factory in the United States, and an educational program developed in cooperation with Georgian College in Canada are described. In cooperation with the Ohio State University, a newly developed distance interactive-learning system that enables us to simulate international internships is also proposed.

  4. International bilateral and multilateral arrangements in energy technologies

    International Nuclear Information System (INIS)

    1978-07-01

    This document, the second report in the series, outlines current DOE international commitments under bilateral and multilateral arrangements, as of January 1, 1978. Included are bilateral agreements for cooperation in the civil uses of atomic energy with countries and international organizations, bilateral and multilateral technical exchanges in all energy technology areas, and multilateral agreements under the auspices of the International Energy Agency (IEA). In addition to outlining the terms, scope, and status of these agreements, this document describes DOE's participation in the work of the major international energy organizations. IEA, the International Atomic Energy Agency (IAEA), and the Nuclear Energy Agency (NEA). Future reports will update the status of ongoing cooperative projects and provide information on new energy R and D activities

  5. Characterization and Metrology for ULSI Technology: 1998 International Conference. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Seiler, D.G. [NIST, Gaithersburg, MD 20899 (United States); Diebold, A.C. [SEMATECH, Austin, TX 78741 (United States); Bullis, W.M. [SEMI, Mountain View, CA 94043 (United States); Schaffner, T.J. [Texas Instruments, Dallas, TX 75221 (United States); McDonald, R. [Intel Corp., Santa Clara, CA 95050 (United States); Walters, E.J. [NIST, Gaithersburg, MD 20899 (United States)

    1998-11-01

    These proceedings represent papers presented at the 1998 International Conference on Characterization and Metrology for ULSI Technology (INIST) in March 1998. The Conference reviewed important semiconductor techniques that are crucial to continued advancements in the semiconductor industry. It brought together leaders, scientists, and engineers concerned with all aspects of the technology and characterization techniques for silicon research. The topics covered included front end processes consisting of modeling, materials, gate dielectrics, doping and wafer issues. Interconnects were discussed in detail including deposition technology. Lithography and patterning was also discussed. Finally, packaging/assembly of the integrated circuits and materials characterization including dopant profiling was discussed. The papers provide an effective portrayal of industry characterization needs and point out some of the problems that must be addressed by industry, academia, and government to continue the dramatic progress in semiconductor technology. There were 141 papers included in these proceedings, out of which 9 have been abstracted for the Energy,Science and Technology database.(AIP)

  6. 4th International Conference on Sustainable Automotive Technologies

    CERN Document Server

    Wellnitz, Jörg; Leary, Martin; Koopmans, Lucien

    2012-01-01

    The book on Sustainable Automotive Technologies aims to draw special attention to the research and practice focused on new technologies and approaches capable of meeting the challenges to sustainable mobility. In particular, the book features incremental and radical technical advancements that are able to meet social, economic and environmental targets in both local and global contexts. These include original solutions to the problems of pollution and congestion, vehicle and public safety, sustainable vehicle design and manufacture, new structures and materials, new power-train technologies and vehicle concepts. In addition to vehicle technologies, the book is also concerned with the broader systemic issues such as sustainable supply chain systems, integrated logistics and telematics, and end-of-life vehicle management. It captures selected peer reviewed papers accepted for presentation at the 4th International Conference on Sustainable Automotive Technologies, ICSAT2012, held at the RMIT, Melbourne, Australi...

  7. 10th International Conference on Computing and Information Technology

    CERN Document Server

    Unger, Herwig; Meesad, Phayung

    2014-01-01

    Computer and Information Technology (CIT) are now involved in governmental, industrial, and business domains more than ever. Thus, it is important for CIT personnel to continue academic research to improve technology and its adoption to modern applications. The up-to-date research and technologies must be distributed to researchers and CIT community continuously to aid future development. The 10th International Conference on Computing and Information Technology (IC 2 IT2014) organized by King Mongkut's University of Technology North Bangkok (KMUTNB) and partners provides an exchange of the state of the art and future developments in the two key areas of this process: Computer Networking and Data Mining. Behind the background of the foundation of ASEAN, it becomes clear that efficient languages, business principles and communication methods need to be adapted, unified and especially optimized to gain a maximum benefit to the users and customers of future IT systems.

  8. International trade, technological change and evolution of work market

    International Nuclear Information System (INIS)

    Cacciotti, M.

    1999-01-01

    The report estimates the historic series of wages and employment depending on the average unit value of importation prices in the most important european countries, Italy, France and Germany for the years 1988-1996. Results shows that in the traditional sectors, with unskilled employment are negative influenced by international trade, otherwise, in the technological advanced sectors, influenced are to be considered positive [it

  9. International Journal of Science and Technology (STECH) Bahir Dar ...

    African Journals Online (AJOL)

    Nneka Umera-Okeke

    International Journal of Science and Technology. (STECH). Bahir Dar- Ethiopia. Vol. 6 (1) ... Logic studies the relation of propositions in order to ascertain the relation of entailment, which ultimately leads to the relation of truth ...... Filosofika: University of. Port Harcourt Journal of Philosophy and Public Affairs. 1.1 (2014): 96 –.

  10. International competition in advanced technology: decisions for America

    National Research Council Canada - National Science Library

    National Academy of Sciences Staff; Office of International Affairs; Policy and Global Affairs; National Academy of Sciences

    1983-01-01

    ... A Consensus Statement Prepared by the Panel on Advanced Technology Competition and the Industrialized Allies Office of International Affairs National Research Council NATIONAL ACADEMY PRESS Washington, D.C. 1983 i Copyrightoriginal retained, the be not from cannot book, paper original however, for version formatting, authoritative the typesetting-specifi...

  11. Satellite Technologies and Services: Implications for International Distance Education.

    Science.gov (United States)

    Stahmer, Anna

    1987-01-01

    This examination of international distance education and open university applications of communication satellites at the postsecondary level notes activities in less developed countries (LDCs); presents potential models for cooperation; and describes technical systems for distance education, emphasizing satellite technology and possible problems…

  12. International Symposium on Intelligent Systems Technologies and Applications

    CERN Document Server

    Thampi, Sabu; Dasgupta, Soura; Srivastava, Praveen; ISTA

    2016-01-01

    This book contains a selection of refereed and revised papers from three special tracks: Ad-hoc and Wireless Sensor Networks, Intelligent Distributed Computing and, Business Intelligence and Big Data Analytics originally presented at the International Symposium on Intelligent Systems Technologies and Applications (ISTA), August 10-13, 2015, Kochi, India.  .

  13. TECHNOLOGICAL IMPERATIVE IMPACT OF GLOBALIZATION ON INTERNATIONAL AGRICULTURAL ECONOMY

    Directory of Open Access Journals (Sweden)

    А. Кozlova

    2014-09-01

    Full Text Available The article highlights the factors influencing agricultural production towards global market. The study consists basic fundamental imperatives of globalization on the agricultural sector in international economic relations. The article analyzes the strategic priorities of the international agricultural sector, which includes financial and credit support, legal aspects, processes and integration of organizational structures. Technological imperatives require a large structural and institutional turn in the Ukrainian economy on the basis of current trends in the global economy, scientific and technical potential. There is a growing importance of organizing and conducting international level in the field of technological forecasting. This type of prediction is considered as backbone component in strategic forecasting and economic development programming.

  14. 5th International Conference on Sustainable Automotive Technologies

    CERN Document Server

    Subic, Aleksandar; Trufin, Ramona

    2014-01-01

    This book captures selected peer reviewed papers presented at the 5th International Conference on Sustainable Automotive Technologies, ICSAT 2013, held in Ingolstadt, Germany. ICSAT is the state-of-the-art conference in the field of new technologies for transportation. The book brings together the work of international researchers and practitioners under the following interrelated headings: fuel transportation and storage, material recycling, manufacturing and management costs, engines and emission reduction. The book provides a very good overview of research and development activities focused on new technologies and approaches capable of meeting the challenges to sustainable mobility. About the Editors: Prof. Dr. Jörg Wellnitz is the Dean of the Faculty of Mechanical Engineering, Technische Hochschule Ingolstadt, Germany. Prof. Dr. Aleksandar Subic is the Head of the School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University, Australia. Ramona Trufin, M.A. is the coordinator of the Facul...

  15. International conference on Advances in Engineering Technologies and Physical Science

    CERN Document Server

    Ao, Sio-Iong; Rieger, Burghard; IAENG Transactions on Engineering Technologies : Special Edition of the World Congress on Engineering and Computer Science 2011

    2013-01-01

    This volume contains thirty revised and extended research articles written by prominent researchers participating in an international conference in engineering technologies and physical science and applications. The conference serves as good platforms for the engineering community to meet with each other and to exchange ideas. The conference has also struck a balance between theoretical and application development. The conference is truly international meeting with a high level of participation from many countries. Topics covered include chemical engineering, circuits, communications systems, control theory, engineering mathematics, systems engineering, manufacture engineering, and industrial applications. The book offers the state of art of tremendous advances in engineering technologies and physical science and applications, and also serves as an excellent reference work for researchers and graduate students working with/on engineering technologies and physical science and applications.

  16. International Conference on Information and Communication Technology for Sustainable Development

    CERN Document Server

    Joshi, Amit; Modi, Nilesh; Pathak, Nisarg

    2016-01-01

    The two volumes of this book collect high-quality peer-reviewed research papers presented in the International Conference on ICT for Sustainable Development (ICT4SD 2015) held at Ahmedabad, India during 3 – 4 July 2015. The book discusses all areas of Information and Communication Technologies and its applications in field for engineering and management. The main focus of the volumes are on applications of ICT for Infrastructure, e-Governance, and contemporary technologies advancements on Data Mining, Security, Computer Graphics, etc. The objective of this International Conference is to provide an opportunity for the researchers, academicians, industry persons and students to interact and exchange ideas, experience and expertise in the current trend and strategies for Information and Communication Technologies.

  17. INL - NNL an International Technology Collaboration Case Study - Advanced Fogging Technologies for Decommissioning - 13463

    International Nuclear Information System (INIS)

    Banford, Anthony; Edwards, Jeremy; Demmer, Rick; Rankin, Richard; Hastings, Jeremy

    2013-01-01

    International collaboration and partnerships have become a reality as markets continue to globalize. This is the case in nuclear sector where over recent years partnerships commonly form to bid for capital projects internationally in the increasingly contractorized world and international consortia regularly bid and lead Management and Operations (M and O) / Parent Body Organization (PBO) site management contracts. International collaboration can also benefit research and technology development. The Idaho National Laboratory (INL) and the UK National Nuclear Laboratory (NNL) are internationally recognized organizations delivering leading science and technology development programmes both nationally and internationally. The Laboratories are actively collaborating in several areas with benefits to both the laboratories and their customers. Recent collaborations have focused on fuel cycle separations, systems engineering supporting waste management and decommissioning, the use of misting for decontamination and in-situ waste characterisation. This paper focuses on a case study illustrating how integration of two technologies developed on different sides of the Atlantic are being integrated through international collaboration to address real decommissioning challenges using fogging technology. (authors)

  18. Measures of International Manufacturing and Trade of Clean Energy Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Engel-Cox, Jill; Sandor, Debbie; Keyser, David; Mann, Margaret

    2017-05-25

    The technologies that produce clean energy, such as solar photovoltaic panels and lithium ion batteries for electric vehicles, are globally manufactured and traded. As demand and deployment of these technologies grows exponentially, the innovation to reach significant economies of scale and drive down energy production costs becomes less in the technology and more in the manufacturing of the technology. Manufacturing innovations and other manufacturing decisions can reduce costs of labor, materials, equipment, operating costs, and transportation, across all the links in the supply chain. To better understand the manufacturing aspect of the clean energy economy, we have developed key metrics for systematically measuring and benchmarking international manufacturing of clean energy technologies. The metrics are: trade, market size, manufacturing value-added, and manufacturing capacity and production. These metrics were applied to twelve global economies and four representative technologies: wind turbine components, crystalline silicon solar photovoltaic modules, vehicle lithium ion battery cells, and light emitting diode packages for efficient lighting and other consumer products. The results indicated that clean energy technologies are being developed via complex, dynamic, and global supply chains, with individual economies benefiting from different technologies and links in the supply chain, through both domestic manufacturing and global trade.

  19. International Conference on Informatics and Communication Technologies for Societal Developmen

    CERN Document Server

    Bhojan, Anand; Peter, J

    2015-01-01

    This volume comprises research papers presented at the International Conference on Informatics and Communication Technologies for Societal Development (ICICTS 2014) held at Karunya University, India. The content focuses on the recent advancements in image or signal processing, computer vision, communication technologies, soft computing, advanced computing, data mining, and knowledge discovery. The primary objective of this volume is to facilitate advancement and application of the knowledge and to promote ideas that solve problems faced by society through cutting-edge technologies. The chapters contain selected articles from academicians, researchers, and industry experts in the form of frameworks, models, and architectures. Practical approaches, observations, and results of research that promotes societal development are also incorporated. This volume will serve as a useful compendium for interested readers and researchers working towards societal development from the technological perspective.

  20. 4th International Conference on Robot Intelligence Technology and Applications

    CERN Document Server

    Karray, Fakhri; Jo, Jun; Sincak, Peter; Myung, Hyun

    2017-01-01

    This book covers all aspects of robot intelligence from perception at sensor level and reasoning at cognitive level to behavior planning at execution level for each low level segment of the machine. It also presents the technologies for cognitive reasoning, social interaction with humans, behavior generation, ability to cooperate with other robots, ambience awareness, and an artificial genome that can be passed on to other robots. These technologies are to materialize cognitive intelligence, social intelligence, behavioral intelligence, collective intelligence, ambient intelligence and genetic intelligence. The book aims at serving researchers and practitioners with a timely dissemination of the recent progress on robot intelligence technology and its applications, based on a collection of papers presented at the 4th International Conference on Robot Intelligence Technology and Applications (RiTA), held in Bucheon, Korea, December 14 - 16, 2015. For better readability, this edition has the total of 49 article...

  1. 3rd International Conference on Robot Intelligence Technology and Applications

    CERN Document Server

    Yang, Weimin; Jo, Jun; Sincak, Peter; Myung, Hyun

    2015-01-01

    This book covers all aspects of robot intelligence from perception at sensor level and reasoning at cognitive level to behavior planning at execution level for each low level segment of the machine. It also presents the technologies for cognitive reasoning, social interaction with humans, behavior generation, ability to cooperate with other robots, ambience awareness, and an artificial genome that can be passed on to other robots. These technologies are to materialize cognitive intelligence, social intelligence, behavioral intelligence, collective intelligence, ambient intelligence and genetic intelligence. The book aims at serving researchers and practitioners with a timely dissemination of the recent progress on robot intelligence technology and its applications, based on a collection of papers presented at the 3rd International Conference on Robot Intelligence Technology and Applications (RiTA), held in Beijing, China, November 6 - 8, 2014. For better readability, this edition has the total 74 papers group...

  2. Enhancement of international cooperation and experience exchange: international and regional cooperation in nuclear technology

    International Nuclear Information System (INIS)

    Henderson, R.R.

    1987-01-01

    This paper will explore methods that have been effective in accomplishing broad-based technology transfer relationships between international commercial nuclear organizations, and have enhanced the benefits from such relationships through mutual participation in the development of new technology. The factors involved in accomplishing technology transfer will be examined based on the 25 years of Westinghouse experience in establishing successful nuclear technology relationships with over 20 different associates world-wide. This will include information pertaining to organization, training, consultation, technical information transmission, and other important aspects of technology transfer. Additionally, the methodology of enhancing and increasing the benefits of technology transfer through cooperative development programs as produced and promoted by Weatinghouse with its associates will be examined. This will include reviews of several significant copperative programs, such as the programs for the Advanced Pressurized Water Reactor and the Integrated Protection and Control Systems for future plants. (author)

  3. Enhancement of international cooperation and experience exchange - international and regional cooperation in nuclear technology

    International Nuclear Information System (INIS)

    Henderson, R.R.

    1988-01-01

    This paper will explore methods that have been effective in accomplishing broad-based technology transfer relationships between international commercial nuclear organizations, and have enhanced the benefits from such relationships through mutual participation in the development of new technology. The factors involved in accomplishing technology transfer will be examined based on the 25 years of Westinghouse experience in establishing successful nuclear technology relationships with over 20 different associates world-wide. This will include information pertaining to organization, training, consultation, technical information transmission, and other important aspects of technology transfer. Additionally, the methodology of enhancing and increasing the benefits of technology transfer through cooperative development programs as produced and promoted by Westinghouse with its associates will be examined. This will include reviews of several significant cooperative programs, such as the programs for the Advanced Pressurized Water Reactor and the Integrated Protection and Control Systems for future plants

  4. Impact of Information and Communication Technologies in International Negotiation Performance

    Directory of Open Access Journals (Sweden)

    Jose Alejandro Cano

    2015-08-01

    Full Text Available Objective – This article establishes relations between the level of importance of Information and Communication Technologies (ICT, the frequency of use of these tools, and the efficiency and efficacy achieved in the international negotiation processes. Design/methodology/approach – A research study is carried out in 180 import and / or export firms in Medellin city, and the proposed relations are explained through a theoretical model. With the information obtained, correlation and comparative analysis of efficiency and efficacy indicators are made. Findings – ICT are essential to perform international processes, therefore the increase in the importance level and frequency of use of these technologies allows perceiving better results about efficiency and efficacy increase. Practical implications – Increasing the application of ICT to the international negotiation processes generates a reduction of cost and time in negotiation and an increase of international sale contract, however ICT must be complemented by other elements such as attitude, training and experience of the negotiator to obtain satisfactory results. Originality/value – The article proposes an original model to study the effect of the importance level and frequency of use of ICT on the performance of international negotiation process.

  5. Dynamic managerial capability of technology-based international new ventures

    DEFF Research Database (Denmark)

    Altshuler, Liliya

    2014-01-01

    that have enabled the INV to survive challenging events and periods in its development, including partial change of ownership and management, the international economic recession, adaption of its managerial processes to stable operations rather than entrepreneurial search, and choice of markets in relation......The article focuses on long-term development of technology-based international new ventures (INVs) and discusses aspects of managing such ventures once they are past the initial success and rapid internationalization and enter the stable development phase. The study builds on an in-depth process...

  6. UNHCR and the pursuit of international protection: accountability through technology?

    DEFF Research Database (Denmark)

    Jacobsen, Katja Lindskov; Sandvik, Kristin B.

    2018-01-01

    Better management and new technological solutions are increasingly portrayed as the way to improve refugee protection and enhance the accountability of humanitarian actors. Taking concepts of legibility, quantification and co-production as the point of departure, this article explores how techno-bureaucratic...... practices shape conceptions of international refugee protection. We do this by examining the evolving roles of results-based management (RBM), biometrics and cash-based interventions as ‘accountability technologies’ in the United Nations High Commissioner for Refugees’ international protection efforts...

  7. Anaerobic digestion and opportunities for international technology transfer

    International Nuclear Information System (INIS)

    Lusk, P.D.

    1997-01-01

    Unmanaged pollutants from organic farm, industrial, and municipal wastes degrade in the environment, and methane emitted from their decomposition may contribute to global climate change. Under modern environmental regulations, these wastes are becoming difficult to dispose of using traditional means. One waste management system, anaerobic digestion or AD, not only prevents pollution but can also convert a disposal problem into a new profit center. This report summarizes the current status of AD as a key technology that both reduces waste and recovers a fuel and other valuable co-products, and AD possibilities for the future. Beyond the technology arena, this paper also discusses the efforts of the International Energy Agency (IEA) Bioenergy AD Activity to encourage technology deployment. The Activity aims to provide reliable information on the cost-effectiveness of AD, markets for biogas and the other co-products, advanced technologies for biogas utilization, environmental benefits, and institutional barriers. The Activity's principal objectives are to accelerate exchange of information and practical experience, identify barriers to the deployment of AD technology, encourage the use of AD technology, and, where relevant, assist and encourage national Pilot and Demonstration (P and D) programs. The goal of these objectives is to increase the deployment of AD technologies and to transfer the ''lessons learned'' from past experience. (author)

  8. International Workshop on Evidence-Based Technology Enhanced Learning

    CERN Document Server

    Gennari, Rosella; Marenzi, Ivana; Prieta, Fernando; Rodríguez, Juan

    2012-01-01

    Research on Technology Enhanced Learning (TEL) investigates how information and communication technologies can be designed in order to support pedagogical activities. The workshop proceedings collects contributions concerning evidence based TEL systems, like their design following EBD principles as well as studies or best practices that educators, education stakeholders or psychologists used to diagnose or improve their students' learning skills, including students with specific difficulties. The international ebTEL’12 workshop wants to be a forum in which TEL researchers and practitioners alike can discuss ideas, projects, and lessons related to ebTEL. The workshop takes place in Salamanca, Spain, on March 28th-30th 2012.  

  9. International school of innovative technologies for cleaning the environment

    Energy Technology Data Exchange (ETDEWEB)

    Ragaini, R.C. [Lawrence Livermore National Lab., CA (United States)

    1996-12-31

    The International School of Innovative Technologies for Cleaning the Environment was established in 1989. This School is located at the Ettore Majorana Centre for Scientific Culture in Erice, Sicily, Italy. The School primarily organizes and hosts training courses, technical conferences and advanced study workshops addressing state-of-the-art technologies to clean the environment, minimize waste generation, prevent pollution, and identify strategies for sustainable development. The most recent workshop, {open_quotes}Risk Management Strategies Applied to Environmental Cleanup in Central and Eastern Europe (CEE),{close_quotes} will be discussed in detail.

  10. International Conference on Computer Science and Information Technology

    CERN Document Server

    Li, Xiaolong

    2014-01-01

    The main objective of CSAIT 2013 is to provide a forum for researchers, educators, engineers and government officials involved in the general areas of Computational Sciences and Information Technology to disseminate their latest research results and exchange views on the future research directions of these fields. A medium like this provides an opportunity to the academicians and industrial professionals to exchange and integrate practice of computer science, application of the academic ideas, improve the academic depth. The in-depth discussions on the subject provide an international communication platform for educational technology and scientific research for the world's universities, engineering field experts, professionals and business executives.

  11. Technological Innovations and International Humanitarian Law: Challenges and Tensions

    Directory of Open Access Journals (Sweden)

    Eric Pomès

    2017-12-01

    Full Text Available In recent years, armed conflicts have changed in nature (civil war, ‘terrorism’ and the means used are increasingly technological (robotisation, cyberwar. Faced with these developments, some would claim International Humanitarian Law (IHL is outdated. While these technological innovations present new challenges in the application of IHL, it still constitutes a relevant legal framework for armed conflicts and the conduct of hostilities. Indeed, the flexibility of IHL allows it to adapt to contemporary conflicts. Therefore, this shows that the statements about its obsolescence are primarily political in nature.

  12. Development of PEM fuel cell technology at international fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Wheeler, D.J.

    1996-04-01

    The PEM technology has not developed to the level of phosphoric acid fuel cells. Several factors have held the technology development back such as high membrane cost, sensitivity of PEM fuel cells to low level of carbon monoxide impurities, the requirement to maintain full humidification of the cell, and the need to pressurize the fuel cell in order to achieve the performance targets. International Fuel Cells has identified a hydrogen fueled PEM fuel cell concept that leverages recent research advances to overcome major economic and technical obstacles.

  13. 12th International Conference on Computing and Information Technology

    CERN Document Server

    Boonkrong, Sirapat; Unger, Herwig

    2016-01-01

    This proceedings book presents recent research work and results in the area of communication and information technologies. The chapters of this book contain the main, well-selected and reviewed contributions of scientists who met at the 12th International Conference on Computing and Information Technology (IC2IT) held during 7th - 8th July 2016 in Khon Kaen, Thailand The book is divided into three parts: “User Centric Data Mining and Text Processing”, “Data Mining Algoritms and their Applications” and “Optimization of Complex Networks”.

  14. IAEA and International Science and Technology Center sign cooperative agreement

    International Nuclear Information System (INIS)

    2008-01-01

    Full text: The IAEA and the International Science and Technology Center (ISTC) today signed an agreement that calls for an increase in cooperation between the two organizations. The memorandum of understanding seeks to amplify their collaboration in the research and development of applications and technology that could contribute to the IAEA's activities in the fields of verification and nuclear security, including training and capacity building. IAEA Safeguards Director of Technical Support Nikolay Khlebnikov and ISTC Executive Director Adriaan van der Meer signed the Agreement at IAEA headquarters in Vienna on 22 October 2008. (IAEA)

  15. International Conference on NextGen Electronic Technologies

    CERN Document Server

    Thalmann, Nadia; Bhaaskaran, V

    2017-01-01

    This book is a collection of keynote lectures from international experts presented at International Conference on NextGen Electronic Technologies (ICNETS2-2016). ICNETS2 encompasses six symposia covering all aspects of electronics and communications domains, including relevant nano/micro materials and devices . This volume comprises of recent research in areas like computational signal processing analysis, intelligent embedded systems, nanoelectronic materials and devices, optical and microwave technologies, VLSI design: circuits systems and application, and wireless communication networks, and the internet of things. The contents of this book will be useful to researchers, professionals, and students working in the core areas of electronics and their applications, especially to signal processing, embedded systems, and networking.

  16. Energy, environment and technological innovation: Rome 2nd international congress

    International Nuclear Information System (INIS)

    1992-01-01

    From the three volumes containing the proceedings of the October 12-16, 1992 2nd International Congress on Energy, Environment and Technological Innovation held at the University of Rome 'La Sapienza', separate abstracts were prepared for 41 papers. The selection of papers included recent developments and research trends in the following high-tech areas: biomass plantations, wind turbines, photovoltaic power plants, solar architecture, building energy management, global warming, automobile air pollution abatement, district heating with cogeneration, and hydrogen fuels for transportation

  17. 2nd International Symposium on Intelligent Systems Technologies and Applications

    CERN Document Server

    Mitra, Sushmita; Thampi, Sabu; El-Alfy, El-Sayed

    2016-01-01

    This book constitutes the thoroughly refereed proceedings of the second International Symposium on Intelligent Systems Technologies and Applications (ISTA’16), held on September 21–24, 2016 in Jaipur, India. The 80 revised papers presented were carefully reviewed and selected from 210 initial submissions and are organized in topical sections on image processing and artificial vision, computer networks and distributed systems, intelligent tools and techniques and applications using intelligent techniques.

  18. 2nd International Conference on Photonics, Optics and Laser Technology

    CERN Document Server

    Raposo, Maria

    2016-01-01

    This collection of the selected papers presented to the Second International Conference on Photonics, Optics and laser technology PHOTOPTICS 2014 covers the three main conference scientific areas of “Optics”, “Photonics” and “Lasers”. The selected papers, in two classes full and short, result from a double blind review carried out by conference Program Committee members who are highly qualified experts in the conference topic areas.

  19. 3rd International Conference on Photonics, Optics and Laser Technology

    CERN Document Server

    Raposo, Maria

    2016-01-01

    The book provides a collection of selected papers presented to the third International Conference on Photonics, Optics and Laser Technology PHOTOPTICS 2015, covering the three main conference scientific areas of “Optics”, “Photonics” and “Lasers”. The selected papers, in two classes full and short, result from a double blind review carried out by the conference program committee members which are highly qualified experts in conference topic areas.

  20. INTERNATIONAL ENVIRONMENTAL TECHNOLOGY IDENTIFICATION, DEVELOPMENT, DEMONSTRATION, DEPLOYMENT AND EXCHANGE

    Energy Technology Data Exchange (ETDEWEB)

    Roy C. Herndon

    2001-02-28

    Cooperative Agreement (DE-FC21-95EW55101) between the U.S. Department of Energy (DOE) and the Florida State University's Institute for International Cooperative Environmental Research (IICER) was designed to facilitate a number of joint programmatic goals of both the DOE and the IICER related to international technology identification, development, demonstration and deployment using a variety of mechanisms to accomplish these goals. These mechanisms included: laboratory and field research; technology demonstrations; international training and technical exchanges; data collection, synthesis and evaluation; the conduct of conferences, symposia and high-level meetings; and other appropriate and effective approaches. The DOE utilized the expertise and facilities of the IICER at Florida State University to accomplish its goals related to this cooperative agreement. The IICER has unique and demonstrated capabilities that have been utilized to conduct the tasks for this cooperative agreement. The IICER conducted activities related to technology identification, development, evaluation, demonstration and deployment through its joint centers which link the capabilities at Florida State University with collaborating academic and leading research institutions in the major countries of Central and Eastern Europe (e.g., Czech Republic, Hungary, Poland) and Russia. The activities and accomplishments for this five-year cooperative agreement are summarized in this Final Technical Report.

  1. International Technology-Oriented Agreements to Address Climate Change

    International Nuclear Information System (INIS)

    De Coninck, H.C.; Fischer, C.; Newell, R.G.; Ueno, T.

    2007-01-01

    Much discussion has surrounded possible alternatives for international agreements on climate change, particularly post-2012. Among these alternatives, technology-oriented agreements (TOAs) are perhaps the least well defined. We explore what TOAs may consist of, why they might be sensible, which TOAs already exist in international energy and environmental governance, and whether they have the potential to make a valuable contribution to addressing climate change. We conclude that TOAs aimed at knowledge sharing and coordination, research, development, or demonstration could increase the overall efficiency and effectiveness of international climate cooperation, but have limited environmental effectiveness on their own. Technology transfer agreements are likely to have similar properties unless the level of resources expended on them is large, in which case they could be environmentally significant. Technology mandates, standards, or incentives can be environmentally effective, within the applicable sector. However, they are likely to be less cost-effective than broad-based, flexible approaches that place a price on emissions. These results indicate that TOAs have the potential to improve the effectiveness of the global response to climate change. The success of specific TOAs will depend on their design, implementation, and the role they are expected to play relative to other components of the climate policy portfolio

  2. International Conference of Applied Science and Technology for Infrastructure Engineering

    Science.gov (United States)

    Elvina Santoso, Shelvy; Hardianto, Ekky

    2017-11-01

    Preface: International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017. The International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017 has been scheduled and successfully taken place at Swiss-Bell Inn Hotel, Surabaya, Indonesia, on August 5th 2017 organized by Department of Civil Infrastructure Engineering, Faculty of Vocation, Institut Teknologi Sepuluh Nopember (ITS). This annual event aims to create synergies between government, private sectors; employers; practitioners; and academics. This conference has different theme each year and “MATERIAL FOR INFRASTUCTURE ENGINEERING” will be taken for this year’s main theme. In addition, we also provide a platform for various other sub-theme topic including but not limited to Geopolymer Concrete and Materials Technology, Structural Dynamics, Engineering, and Sustainability, Seismic Design and Control of Structural Vibrations, Innovative and Green Buildings, Project Management, Transportation and Highway Engineering, Geotechnical Engineering, Water Engineering and Resources Management, Surveying and Geospatial Engineering, Coastal Engineering, Geophysics, Energy, Electronic and Mechatronic, Industrial Process, and Data Mining. List of Organizers, Journal Editors, Steering Committee, International Scientific Committee, Chairman, Keynote Speakers are available in this pdf.

  3. Leveraging physical protection technology for international safeguards applications

    International Nuclear Information System (INIS)

    Glidewell, Don

    2001-01-01

    Full text: In an effort to improve the effectiveness, efficiency, and reliability of equipment used for International Safeguards, the European Safeguards Research and Development Association (ESARDA) Reflection Group requested the ESARDA Containment and Surveillance Working Group to investigate the feasibility of employing physical protection technologies for international safeguards applications. The physical protection market has traditionally been much greater than the international safeguards market. Consequently, physical protection technology has been subjected to greater testing and evaluation, and has enjoyed much greater real world experience. The larger market yields economies of scale, and the greater testing and experience should arguably result in improved reliability. This paper will compare requirements for physical protection versus international safeguards equipment, and identify types of physical protection equipment, which have potential for safeguards applications. It will evaluate both Commercial Off-the-Shelf (COTS) and non-COTS equipment. Finally, for selected physical protection equipment, the paper will evaluate the degree of modification that would be needed to make it acceptable for safeguards applications. (author)

  4. Strategic Use of Information Technology in International Business: A Framework for Information Technology Application

    OpenAIRE

    Steven J. Simon; Varun Grover

    1993-01-01

    Information Technology’s (IT) link to the strategy of the firm has been explored in Information System literature, but the application of IT to the strategy of the international firm has received limited attention. This paper addresses the topic by exploring the use of IT in conjunction with a popular framework, the Integration- Responsiveness (IR) framework, of international business strategy. The framework’s three subgroups; global integration, multifocal, and local responsiveness are d...

  5. First International Conference on Applications of Photonic Technology (ICAPT'94)

    CERN Document Server

    Chrostowski, Jacek; Measures, Raymond; Applications of Photonic Technology

    1995-01-01

    In this book we present a snapshot of the state of the art in photonics in 1994, showing typical applications and emerging new ones; discussing the key technologies behind these applications, their limitations, and prospects. The articles in this book are extended versions of the papers presented at the first International Conference on Applications ofPhotonic Technology (ICAPT'94), held in Toronto, Canada, on June 21-23, 1994. Photonics has been recognized as one of the key technologies for the 21 st century, as electronics was the technology of the 20th centrury and electrical engineering changed the life of people in the 19th century. According to the recent report of the Organization for Economic Cooperation and Development in Paris (OECD), the market for photonics will grow dramatically in the next 10 years with an expected world-wide expenditure of US $230 billion from some US $30 billion in 1992. The explosion of information technology was the largest driving force for the deployment of photonic techno...

  6. Educational Technology Research Journals: "International Journal of Technology and Design Education", 2005-2014

    Science.gov (United States)

    Christensen, James M.; Jones, Brian; Cooper, Jessica Rose; McAllister, Laura; Ware, Mark B.; West, Richard E.

    2015-01-01

    This study examines the trends of the "International Journal of Technology and Design Education" over the past decade (2005-2014). The researchers looked at trends in article topics, research methods, authorship, and article citations by analyzing keyword frequencies, performing word counts of article titles, classifying studies…

  7. Energy technologies at the cutting edge: international energy technology collaboration IEA Implementing Agreements

    Energy Technology Data Exchange (ETDEWEB)

    Pottinger, C. (ed.)

    2007-05-15

    Ensuring energy security and addressing climate change issues in a cost-effective way are the main challenges of energy policies and in the longer term will be solved only through technology cooperation. To encourage collaborative efforts to meet these energy challenges, the IEA created a legal contract - Implementing Agreement - and a system of standard rules and regulations. This allows interested member and non-member governments or other organisations to pool resources and to foster the research, development and deployment of particular technologies. For more than 30 years, this international technology collaboration has been a fundamental building block in facilitating progress of new or improved energy technologies. There are now 41 Implementing Agreements. This is the third in the series of publications highlighting the recent results and achievements of the IEA Implementing Agreements. This document is arranged in the following sections: Cross-cutting activities (sub-sectioned: Climate technology initiative; Energy Technology Data Eexchange; and Energy technology systems analysis programme); End-use technologies (sub-sectioned: Buildings; Electricity; Industry; and Transport; Fossil fuels (sub-sectioned: Clean Coal Centre; Enhanced oil recovery Fluidized bed conversion; Greenhouse Gas R & D; Multiphase flow sciences); Fusion power; Renewable energies and hydrogen; and For more information (including detail on the IEA energy technology network; IEA Secretariat Implementing Agreement support; and IEA framework. Addresses are given for the Implementing Agreements. The publication is based on core input from the Implementing Agreement Executive Committee.

  8. Transatlantic Innovations: a new approach to international ideas and technology.

    Science.gov (United States)

    Evans, Gregory R D; Blondeel, Phillip; Marchac, Daniel; Kinney, Brian; Cunningham, Bruce; Neuhann-Lorenz, Constance

    2010-07-01

    In April of this past year, Transatlantic Innovations brought a variety of organizations and industry together for an international exchange of ideas, new technology, and current trends in plastic surgery. The meeting was highly interactive and included audience response devices. The focus was on 10 major areas: (1) new surgical techniques; (2) composite allografts versus conventional techniques, facing the future; (3) interspecialty collaboration versus competition; (4) the business of plastic surgery, best practices; (5) the image of the plastic surgeon, branding yourself; (6) medical tourism; (7) publicity; (8) the regulation of innovation, U.S. Food and Drug Administration and European Medicines Agency perspective; (9) the future of plastic surgery, cutting edge technologies; and (10) applications and controversies in fat grafting. The meeting concluded with the 8th International Committee for Quality Assurance, Medical Technologies and Devices in Plastic Surgery Consensus Conference with the development of a consensus statement. Through an interactive audience response system, additional questions and attitudes were asked of the audience and, in real time, international differences were identified, which led to further discussions from panelists. Responses were identified in three major groups: European Union, North America, and the Rest of the World. Responses and data are included in this article. The meeting brought participants, industry, regulators, and educators from both sides of the Atlantic. The interaction of these groups in these outlined topics brought a unique perspective to the meeting and, in the end, volumes of data. We have more in common than we believe. It is our anticipation that as we as plastic surgeons move forward, we can use these interactions to help our own practices but more specifically the specialty as a whole.

  9. 2016 37th International Conference Information Systems Architecture and Technology

    CERN Document Server

    Grzech, Adam; Świątek, Jerzy; Wilimowska, Zofia

    2017-01-01

    This four volume set of books constitutes the proceedings of the 2016 37th International Conference Information Systems Architecture and Technology (ISAT), or ISAT 2016 for short, held on September 18–20, 2016 in Karpacz, Poland. The conference was organized by the Department of Management Systems and the Department of Computer Science, Wrocław University of Science and Technology, Poland. The papers included in the proceedings have been subject to a thorough review process by highly qualified peer reviewers. The accepted papers have been grouped into four parts: Part I—addressing topics including, but not limited to, systems analysis and modeling, methods for managing complex planning environment and insights from Big Data research projects. Part II—discoursing about topics including, but not limited to, Web systems, computer networks, distributed computing, and mulit-agent systems and Internet of Things. Part III—discussing topics including, but not limited to, mobile and Service Oriented Architect...

  10. 36th International Conference on Information Systems Architecture and Technology

    CERN Document Server

    Grzech, Adam; Świątek, Jerzy; Wilimowska, Zofia

    2016-01-01

    This four volume set of books constitutes the proceedings of the 36th International Conference Information Systems Architecture and Technology 2015, or ISAT 2015 for short, held on September 20–22, 2015 in Karpacz, Poland. The conference was organized by the Computer Science and Management Systems Departments, Faculty of Computer Science and Management, Wroclaw University of Technology, Poland. The papers included in the proceedings have been subject to a thorough review process by highly qualified peer reviewers. The accepted papers have been grouped into four parts: Part I—addressing topics including, but not limited to, systems analysis and modeling, methods for managing complex planning environment and insights from Big Data research projects. Part II—discoursing about topics including, but not limited to, Web systems, computer networks, distributed computing, and multi-agent systems and Internet of Things. Part III—discussing topics including, but not limited to, mobile and Service Oriented Archi...

  11. 2nd International Conference on Recent Advances in Information Technology

    CERN Document Server

    Mukhopadhyay, Sushanta

    2014-01-01

    The book is based on the research papers presented in Second International Conference on Recent Advances in Information Technology (RAIT 2014), held at Indian School of Mines, Dhanbad, India. It provides the latest developments in the area of information technology and covers a variety of topics, including Advanced Algorithm Design and Analysis, Algorithmic Graph Theory, Artificial Intelligence, Bioinformatics, Circuit Design Automation, Computational Biology, Computational Mathematics, Cryptology, Data Compression, Database Management System, Data Mining, E-Applications, Embedded System, Information and Network Security, Information Retrieval, Internet Computing, etc. The objective is to familiarize the reader with the latest scientific developments that are taking place in various fields and the latest sophisticated problem solving tools that are being developed to deal with the complex and intricate problems that are otherwise difficult to solve by the usual and traditional methods.

  12. 8th International School of Fusion Reactor Technology "Ettore Majorana"

    CERN Document Server

    Leotta, G G; Muon-catalyzed fusion and fusion with polarized nuclei

    1988-01-01

    The International School of Fusion Reactor Technology started its courses 15 years ago and since then has mantained a biennial pace. Generally, each course has developed the subject which was announced in advance at the closing of the previous course. The subject to which the present proceedings refer was chosen in violation of that rule so as to satisfy the recent and diffuse interest in cold fusion among the main European laboratories involved in controlled thermonuclear research (CTR). In the second half of 1986 we started to prepare a workshop aimed at assessing the state of the art and possibly of the perspectives of muon- catalyzed fusion. Research in this field has recently produced exciting experimental results open to important practical applications. We thought it worthwhile to consider also the beneficial effects and problems of the polarization ofthe nuclei in both cold and thermonuclear fusion. In preparing the 8th Course on Fusion Reactor Technology, it was necessary to abandon the tradi...

  13. Installation technology of reactor internals on shroud replacement work

    International Nuclear Information System (INIS)

    Miyano, Hiroshi

    1999-01-01

    Since the replacement of large welded reactor internals much as a core shroud did not have a precedent in the world, quite a few technologies had to be developed. Especially for the installation of new core shroud, jet pumps, core plate and top guide, the accurate weld and fit-up techniques for large structures was required to secure their integrity. The vessel shielding system was utilized to reduce general area dose rate such that all replacement work. For jet pump installation, automatic remote welding machines were used for high radiation area. As for the core shroud, shroud support weld prep machining tool with high accuracy, jacking system to support fit-up, new weld machine for small work space and low heat input weld joint were developed. Shroud replacement work in Fukushima Dai-ichi NPS Unit 3 (1F-3) with application of these development techniques, was successfully accomplished. The technology is applied for 1F-2 replacement work also. (author)

  14. 7th KES International Conference on Intelligent Decision Technologies

    CERN Document Server

    Jain, Lakhmi; Howlett, Robert

    2015-01-01

    This book presents the 57 papers accepted for presentation at the Seventh KES International Conference on Intelligent Decision Technologies (KES-IDT 2015), held in Sorrento, Italy, in June 2015. The conference consists of keynote talks, oral and poster presentations, invited sessions and workshops on the applications and theory of intelligent decision systems and related areas. The conference provides an opportunity for the presentation and discussion of interesting new research results, promoting knowledge transfer and the generation of new ideas. The book will be of interest to all those whose work involves the development and application of intelligent decision systems.

  15. International co-operation and the transfer of nuclear technology

    International Nuclear Information System (INIS)

    di Primio, J.C.

    1977-01-01

    The transfer of technology from developed countries is usually done through industrial enterprises. The local industrialization of imported technology does not necessarily imply that full benefit is extracted from its application. A pre-established scientific and technical infrastructure is needed to understand and incorporate it, and to develop methods for improvement and use at the industrial level, in the frame of national conditions. The transference of nuclear technology has recently shown new concepts for implementation. It is becoming a rule that massive industrial nuclear technology transfer to developing nations is tied to a requirement for simultaneous assistance in creating or promoting the infrastructure. An example of international co-operation to meet this requirement is the Argentine-German Agreement for the Peaceful Applications of Nuclear Energy. Since 1971 this has been used to strengthen the scientific and technical programmes of the Argentine Atomic Energy Commission in the relevant fields of industrial applications. The objectives and implementation of the agreement are described: co-operative actions were initially directed to the infrastructure needed to support the nuclear fuel cycle industry. The results achieved during the period 1971-1976 are critically analysed. This analysis has influenced the selection of future co-operative projects as well as the extension of the co-operation to other nuclear fields of common interest. (author)

  16. INTERNATIONAL TECHNOLOGY TRANSFER AND LOCALIZATION: SUCCESS STORIES IN NUCLEAR BRANCH

    Directory of Open Access Journals (Sweden)

    Yulia V. Chernyakhovskaya

    2016-01-01

    Full Text Available countries are considering nuclear power industry development [2, p. 3; 3, p. 3; 4]. For newcomer-countries it is of great importance to stimulate the national industry through NPP projects implementation based on technology transfer and localization (TTL. The study and systematization of world experience is useful in purpose to elaborate the national industry development programs. Objectives. The aim of article is to determine success factors of TTL; tasks: 1 to study TTL international experience in the fi eld of nuclear power technologies; 2 on the ground of the world practice to analyze preconditions, contents, stages, arrangement modes, formats and results of TTL. Methods. The following methods are utilized in the study: analysis and synthesis including problem-chronological, cause and eff ect and logical analysis and historical-diachronic method (method of periodization. Results. The following conclusions presented below have been made on the basis of the three cases study related to nuclear industry development using TTL (France, South Korea and China. Conclusions. The TTL success factors includes: Government support that provides long-term governmental development plan of nuclear power and industry for nuclear power based on TTL, and an appropriate international cooperation (under favorable conditions of “NPP buyers market”; Complex approach to implementation of the national TTL program and NPP construction projects: signing of NPP construction contracts with vendors stipulating technology transfer; NPP designing and constructing should be performed jointly with training and transferring of technical documentation and software. Technology transfer cooperation should be implemented through the licenses agreements and setting up joint ventures; Public acceptance and support.

  17. Relations between information and communication technologies and international migration

    Directory of Open Access Journals (Sweden)

    Lukić Vesna

    2017-01-01

    Full Text Available The paper focuses on the topic of the impact of Information and Communication Technologies (ICT on the international migration phenomenon According to the discussed literature, there is an impression that ICTs change the essence of migration and monitoring of migration flows. It also suggests that migration and migrants’ needs shape the development of ICT services intended to them, but they also shape the content of social media. The impact of new technologies on international migration (before migration, during migration and upon arrival in the country of destination has been discussed through an overview of empirical research findings in Serbia and other countries. In this context, the ICT users relevant to the migration process (individuals and interest groups have been more closely determined and discussed, the aspects of the relations between ICTs and migration have been highlighted, as well as their implications for individuals and society. The considered aspects of relations of ICTs and international migration at different stages of the migration process and their severe implications for individuals and society, in our opinion, point to the need for cooperation of users of information and communication technologies relevant to the migration process in different domains ‒ the spheres of influence of ICTs. We believe that is how the potential of ICTs will be exploited in an adequate way, for benefit of both ‒ migrants and other relevant interested parties. While widely accepted by individuals, information and communication technologies have just begun to be recognized as important for migration policy in Serbia and generally, in terms of their opportunities and challenges. In Serbia, only recently (as of the 2011 Census there has been data available on the use of ICTs by certain migrant groups (long-term settled refugees from former Yugoslav republics. Also, the qualitative surveys on the use of ICTs during the migration by transit

  18. Proceedings of the 2012 International Conference on Information Technology and Software Engineering : Information Technology & Computing Intelligence

    CERN Document Server

    Cai, Guoqiang; Liu, Weibin; Xing, Weiwei

    2013-01-01

    Proceedings of the 2012 International Conference on Information Technology and Software Engineering presents selected articles from this major event, which was held in Beijing, December 8-10, 2012. This book presents the latest research trends, methods and experimental results in the fields of information technology and software engineering, covering various state-of-the-art research theories and approaches. The subjects range from intelligent computing to information processing, software engineering, Web, unified modeling language (UML), multimedia, communication technologies, system identification, graphics and visualizing, etc. The proceedings provide a major interdisciplinary forum for researchers and engineers to present the most innovative studies and advances, which can serve as an excellent reference work for researchers and graduate students working on information technology and software engineering. Prof. Wei Lu, Dr. Guoqiang Cai, Prof. Weibin Liu and Dr. Weiwei Xing all work at Beijing Jiaotong Uni...

  19. Proceedings of the 2012 International Conference on Information Technology and Software Engineering : Information Technology

    CERN Document Server

    Cai, Guoqiang; Liu, Weibin; Xing, Weiwei

    2013-01-01

    Proceedings of the 2012 International Conference on Information Technology and Software Engineering presents selected articles from this major event, which was held in Beijing, December 8-10, 2012. This book presents the latest research trends, methods and experimental results in the fields of information technology and software engineering, covering various state-of-the-art research theories and approaches. The subjects range from intelligent computing to information processing, software engineering, Web, unified modeling language (UML), multimedia, communication technologies, system identification, graphics and visualizing, etc. The proceedings provide a major interdisciplinary forum for researchers and engineers to present the most innovative studies and advances, which can serve as an excellent reference work for researchers and graduate students working on information technology and software engineering. Prof. Wei Lu, Dr. Guoqiang Cai, Prof. Weibin Liu and Dr. Weiwei Xing all work at Beijing Jiaotong Uni...

  20. CONFERENCE REVIEW:V. International Educational Technology Symposium

    Directory of Open Access Journals (Sweden)

    Reviewed by Mubin KIYICI

    2005-10-01

    Full Text Available 167V. International Educational Technology SymposiumWas held in Sakarya UniversityBetween 21 – 23 September 2005Reviewed by Mubin KIYICISakarya Universitymkiyici@anadolu.edu.trV. International Educational Technology Symposium was held in Sakarya University heldbetween 21 – 23 September 2005 by cooperation with Eastern Mediterranean University,Louisiana State University, Governors State University and Ohio University, and TOJET(The Turkish Online Journal of Educational Technology journal, at Sakarya UniversityCampus. Assoc. Prof. Dr. Aytekin ISMAN who was conference coordinator and Editor inchief of TOJET spoke at the opening ceremony of symposium. His speech was related todiffusion of distance education and diffusion of usage educational technology. And thenProf. Dr. Mehmet DURMAN who is Rector of Sakarya University, talked about aapplications of Distance Education which is applied by Sakarya University and educationaltechnology applications in Tukey. His Speech is here:168Dear GuestsWelcome to the “5th International Educational Technology ConferenceIETC/EGİTEK 2005. It is an international educational activity for academics,teachers and educators. This conference is now a well known educationaltechnology event and the number of paper submissions and attendeesincrease every year.This year, IETC-2005 received 268 applications. The conference academicadvisory board accepted 209 applications.IETC-2005 promotes the development and dissemination of theoreticalknowledge, conceptual research, and professional knowledge throughconference activities, the conference proceeding book, and the TurkishOnline Journal of Educational Technology (TOJET. Its focus is to create anddisseminate knowledge about the use instructional technology for learningand teaching in education.The main theme of IETC-2005 is distance education. Distance education is adelivery system of teaching and learning, when the teacher and the studentare separated by physical distance

  1. Technological learning through international collaboration: Lessons from the field

    Science.gov (United States)

    Wood, Danielle; Weigel, Annalisa

    2013-02-01

    Countries on every continent are making new or renewed commitments to domestic satellite programs. These programs have the potential to address national needs by enhancing access to information, improving infrastructure and providing inspiration to the public. How do countries without local expertise in space technology begin a new satellite program? What is the role of international collaboration in supporting the efforts of a new space fairing country? This paper explores such questions by highlighting outputs from intensive field work in Africa and Asia. Specifically, the study explores case studies of early space activity in these countries to search for lessons about the management of a young space program. The observations from field work are compared to ideas from scholarly literature on technological learning. The findings are organized using principles from systems architecture. The paper presents a model that captures many of the influences and strategic decision areas for a collaborative satellite development project. The paper also highlights the growth of capability among African countries in the area of satellite technology.

  2. International Symposium on Interfacial Joining and Surface Technology (IJST2013)

    Science.gov (United States)

    Takahashi, Yasuo

    2014-08-01

    Interfacial joining (bonding) is a widely accepted welding process and one of the environmentally benign technologies used in industrial production. As the bonding temperature is lower than the melting point of the parent materials, melting of the latter is kept to a minimum. The process can be based on diffusion bonding, pressure welding, friction welding, ultrasonic bonding, or brazing-soldering, all of which offer many advantages over fusion welding. In addition, surface technologies such as surface modification, spraying, coating, plating, and thin-film formation are necessary for advanced manufacturing, fabrication, and electronics packaging. Together, interfacial joining and surface technology (IJST) will continue to be used in various industrial fields because IJST is a very significant form of environmentally conscious materials processing. The international symposium of IJST 2013 was held at Icho Kaikan, Osaka University, Japan from 27-29 November, 2013. A total of 138 participants came from around the world to attend 56 oral presentations and 36 posters presented at the symposium, and to discuss the latest research and developments on interfacial joining and surface technologies. This symposium was also held to commemorate the 30th anniversary of the Technical Commission on Interfacial Joining of the Japan Welding Society. On behalf of the chair of the symposium, it is my great pleasure to present this volume of IOP Conference Series: Materials Science and Engineering (MSE). Among the presentations, 43 papers are published here, and I believe all of the papers have provided the welding community with much useful information. I would like to thank the authors for their enthusiastic and excellent contributions. Finally, I would like to thank all members of the committees, secretariats, participants, and everyone who contributed to this symposium through their support and invaluable effort for the success of IJST 2013. Yasuo Takahashi Chair of IJST 2013

  3. International Symposium on Interfacial Joining and Surface Technology (IJST2013)

    International Nuclear Information System (INIS)

    Takahashi, Yasuo

    2014-01-01

    Interfacial joining (bonding) is a widely accepted welding process and one of the environmentally benign technologies used in industrial production. As the bonding temperature is lower than the melting point of the parent materials, melting of the latter is kept to a minimum. The process can be based on diffusion bonding, pressure welding, friction welding, ultrasonic bonding, or brazing-soldering, all of which offer many advantages over fusion welding. In addition, surface technologies such as surface modification, spraying, coating, plating, and thin-film formation are necessary for advanced manufacturing, fabrication, and electronics packaging. Together, interfacial joining and surface technology (IJST) will continue to be used in various industrial fields because IJST is a very significant form of environmentally conscious materials processing. The international symposium of IJST 2013 was held at Icho Kaikan, Osaka University, Japan from 27–29 November, 2013. A total of 138 participants came from around the world to attend 56 oral presentations and 36 posters presented at the symposium, and to discuss the latest research and developments on interfacial joining and surface technologies. This symposium was also held to commemorate the 30th anniversary of the Technical Commission on Interfacial Joining of the Japan Welding Society. On behalf of the chair of the symposium, it is my great pleasure to present this volume of IOP Conference Series: Materials Science and Engineering (MSE). Among the presentations, 43 papers are published here, and I believe all of the papers have provided the welding community with much useful information. I would like to thank the authors for their enthusiastic and excellent contributions. Finally, I would like to thank all members of the committees, secretariats, participants, and everyone who contributed to this symposium through their support and invaluable effort for the success of IJST 2013. Yasuo Takahashi Chair of IJST 2013

  4. Intelligent Decision Technologies : Proceedings of the 4th International Conference on Intelligent Decision Technologies

    CERN Document Server

    Watanabe, Toyohide; Phillips-Wren, Gloria; Howlett, Robert; Jain, Lakhmi

    2012-01-01

    The Intelligent Decision Technologies (IDT) International Conference encourages an interchange of research on intelligent systems and intelligent technologies that enhance or improve decision making. The focus of IDT is interdisciplinary and includes research on all aspects of intelligent decision technologies, from fundamental development to real applications. IDT has the potential to expand their support of decision making in such areas as finance, accounting, marketing, healthcare, medical and diagnostic systems, military decisions, production and operation, networks, traffic management, crisis response, human-machine interfaces, financial and stock market monitoring and prediction, and robotics. Intelligent decision systems implement advances in intelligent agents, fuzzy logic, multi-agent systems, artificial neural networks, and genetic algorithms, among others.  Emerging areas of active research include virtual decision environments, social networking, 3D human-machine interfaces, cognitive interfaces,...

  5. 2nd International Conference on Computer and Communication Technologies

    CERN Document Server

    Raju, K; Mandal, Jyotsna; Bhateja, Vikrant

    2016-01-01

    The book is about all aspects of computing, communication, general sciences and educational research covered at the Second International Conference on Computer & Communication Technologies held during 24-26 July 2015 at Hyderabad. It hosted by CMR Technical Campus in association with Division – V (Education & Research) CSI, India. After a rigorous review only quality papers are selected and included in this book. The entire book is divided into three volumes. Three volumes cover a variety of topics which include medical imaging, networks, data mining, intelligent computing, software design, image processing, mobile computing, digital signals and speech processing, video surveillance and processing, web mining, wireless sensor networks, circuit analysis, fuzzy systems, antenna and communication systems, biomedical signal processing and applications, cloud computing, embedded systems applications and cyber security and digital forensic. The readers of these volumes will be highly benefited from the te...

  6. 1st International School of Fusion Reactor Technology "Ettore Majorana"

    CERN Document Server

    Knoepfel, Heinz; Safety, Environmental Impact and Economic Prospects of Nuclear Fusion

    1990-01-01

    This book contains the lectures and the concluding discussion of the "Seminar on Safety, Environmental Impact, and Economic Prospects of Nuclear Fusion", which was held at Erice, August 6-12, 1989. In selecting the contributions to this 9th meeting held by the International School of Fusion Reactor Technology at the E. Majorana Center for Scientific Cul­ ture in Erice, we tried to provide a comprehensive coverage of the many interre­ lated and interdisciplinary aspects of what ultimately turns out to be the global acceptance criteria of our society with respect to controlled nuclear fusion. Consequently, this edited collection of the papers presented should provide an overview of these issues. We thus hope that this book, with its extensive subject index, will also be of interest and help to nonfusion specialists and, in general, to those who from curiosity or by assignment are required to be informed on these as­ pects of fusion energy.

  7. International Conference on Physics and Technology of Reactors and Applications

    International Nuclear Information System (INIS)

    2007-01-01

    The first international conference on physics and technology of reactors and applications (PHYTRA 1) which took place in Marrakech (Morocco) from 14 to 16 March 2007, was designed to bring together scientists, teachers and students from universities, research centres and industry and other institutions to exchange knowledge and to discuss ideas and future issues. The programmes of the PHYTRA 1 conference covers a wide variety topics, the conference was organised in three plenary sessions, ten oral technical sessions and two poster sessions. The plenary sessions covers the following topics : The prospects of nuclear energy, The situation of nuclear sciences and energy in Morocco and Africa, and the new development in reactor physics and reactor design [fr

  8. 4th International Conference on Applied Computing and Information Technology

    CERN Document Server

    2017-01-01

    This edited book presents scientific results of the 4th International Conference on Applied Computing and Information Technology (ACIT 2016) which was held on December 12–14, 2016 in Las Vegas, USA. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. The aim of this conference was also to bring out the research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them. The conference organizers selected the best papers from those papers accepted for presentation at the conference. The papers were chosen based on review scores submitted by members of the Program Committee, and underwent further rigorous rounds of review. Th...

  9. Proceedings of the International Conferences on Internet Technologies & Society (ITS), Education Technologies (ICEduTECH), and Sustainability, Technology and Education (STE) (Melbourne, Australia, December 6-8, 2016)

    Science.gov (United States)

    Kommers, Piet, Ed.; Issa, Tomayess, Ed.; Issa, Theodora, Ed.; McKay, Elspeth, Ed.; Isias, Pedro, Ed.

    2016-01-01

    These proceedings contain the papers and posters of the International Conferences on Internet Technologies & Society (ITS 2016), Educational Technologies (ICEduTech 2016) and Sustainability, Technology and Education (STE 2016), which have been organised by the International Association for Development of the Information Society and…

  10. International Colloquium on Sports Science, Exercise, Engineering and Technology 2014

    CERN Document Server

    Ismail, Shariman; Sulaiman, Norasrudin

    2014-01-01

    The proceeding is a collection of research papers presented at the International Colloquium on Sports Science, Exercise, Engineering and Technology (ICoSSEET2014), a conference dedicated to address the challenges in the areas of sports science, exercise, sports engineering and technology including other areas of sports, thereby presenting a consolidated view to the interested researchers in the aforesaid fields. The goal of this conference was to bring together researchers and practitioners from academia and industry to focus on the scope of the conference and establishing new collaborations in these areas. The topics of interest are as follows but are not limited to:1. Sports and Exercise Science • Sports Nutrition • Sports Biomechanics • Strength and Conditioning • Motor Learning and Control • Sports Psychology • Sports Coaching • Sports and Exercise Physiology • Sports Medicine and Athletic Trainer • Fitness and Wellness • Exercise Rehabilitation • Adapted Physical Activity...

  11. International Conference on Materials Science and Technology (ICMST 2012)

    Science.gov (United States)

    Joseph, Ginson P.

    2015-02-01

    FROM THE CONVENOR'S DESK The Department of Physics, St. Thomas College Pala, is highly privileged to organize an International Conference on Materials Science and Technology (ICMST 2012) during 10-14 June 2012, and as Convenor of the conference it is with legitimate pride and immense gratitude to God that I remember the most enthusiastic responses received for this from scientists all over the world. In a time of tremendous revolutionary changes in Materials Science and Technology, it is quite in keeping with the tradition of a pioneering institute that St. Thomas College is, to have risen to the occasion to make this conference a reality. We have no doubt that this proved to be a historic event, a real breakthrough, not only for us the organizers but also for all the participants. A conference of this kind provides a nonpareil, a distinctly outstanding platform for the scholars, researchers and the scientists to discuss and share ideas with delegates from all over the world. This had been most fruitful to the participants in identifying new collaborations and strengthening existing relations. That experts of diverse disciplines from across the world were sitting under one roof for five days, exchanging views and sharing findings, was a speciality of this conference. The event has evoked excellent responses from all segments of the Materials Science community worldwide. 600 renowned scholars from 28 countries participated in this. We were uniquely honoured to have Prof. C.N.R. Rao, Chairman, Scientific Advisory Council to the Prime Minister of India, to inaugurate this conference. May I take this opportunity to thank all those who have contributed their valuable share, diverse in tone and nature, in the making of this conference. My whole hearted gratitude is due to the international and national members of the advisory committee for their valuable guidance and involvement. I place on record my heartfelt gratitude to our sponsors. I am sure that this conference has

  12. 75 FR 60141 - International Business Machines (IBM), Global Technology Services Delivery Division, Including On...

    Science.gov (United States)

    2010-09-29

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,164] International Business... 25, 2010, applicable to workers of International Business Machines (IBM), Global Technology Services... hereby issued as follows: All workers of International Business Machines (IBM), Global Technology...

  13. Professional Development for International Teachers: Examining TPACK and Technology Integration Decision Making

    Science.gov (United States)

    Dalal, Medha; Archambault, Leanna; Shelton, Catharyn

    2017-01-01

    This mixed-methods study explored the impacts of a semester-long technology professional development for secondary school international teachers from developing nations around the world. We used (a) a survey approach to examine international teachers' perceived technology integration abilities using the technological pedagogical content knowledge…

  14. 5th International Conference OTEH 2012 - defense technology (Proceedings review

    Directory of Open Access Journals (Sweden)

    Vlado Petar Đurković

    2013-02-01

    Full Text Available This article gives an overview of all papers and events at the Fifth International ScientificConference on Defense Technologies OTEH 2012 held in Belgrade, in the Military Technical Institute (VTI, from 18th to 19th September 2012.The paper review presents the Conference Sections by subjects and guest-lectureres as well as the institutions of all authors who actively participated at the Conference.About the ConferenceThe Fifth International Scientific Conference on Defense Technologies OTEH 2012  was held in Belgrade in the Military Technical Institute in Žarkovo, from 18th to 19thSeptember 2012..The Conference program was organized in two plenary sessions and a working part which took place in four halls.In the plenary session, two key lectures were held by eminent experts from abroad. The first lecture entitled „An adaptive remeshing technique for 3D crack growth simulations”, was given by Dr Vincent Chiaruttini (ONERA Institute, Paris, France. The second one, „New Technologies for Advanced Defence Systems”, was held by Dr Filippo Neri (Virtualabs Company, Rome, Italy.Fifteen sessions were organised at the Conference. The authors presented their works in open discussions answering questions from the audience. The average number of attendees at each session was about 40.The papers were sorted by topic areas:Aerodynamics and flight dynamics: 12 papersAircraft: 23 papersWeapon systems, ammunition, energy materials, combat vehicles: 29 papersIntegrated sensor systems and robotic systems: 16 papersTelecommunication and information systems: 18 papersMaterials and technologies: 34 papersQuality, standardization, metrology, maintenance and exploitation: 11 papersOut of 163 submitted papers for this Conference, 145 papers were accepted and distributed in an electronic form on CDs to the present authors, co-authors, guests and invitees to the Conference. The number of participants with authors and co-authors was impressive - 243. The

  15. PREFACE: International Symposium on `Vacuum Science and Technology' (IVS 2007)

    Science.gov (United States)

    Mittal, K. C.; Gupta, S. K.

    2008-03-01

    The Indian Vacuum Society (established in 1970) has organized a symposium every alternate year on various aspects of vacuum science and technology. There has been considerable participation from R & D establishments, universities and Indian industry in this event. In view of the current global scenario and emerging trends in vacuum technology, this year, the executive committee of IVS felt it appropriate to organize an international symposium at Tata Institute of Fundamental Research, Colaba, Mumbai 400 005 from 29-30 November 2007. This symposium provided a forum for exchange of information among vacuum scientists, technologists and industrialists on recent advances made in the areas of large vacuum systems, vacuum production, its measurement and applications in industry, and material processing in vacuum. Vacuum science and technology has made vital contributions in high tech areas like space, high energy particle accelerators, large plasma systems, electronics, thin films, melting and refining of metals, extraction and processing of advanced materials etc. The main areas covered in the symposium were the production and measurement of vacuums, leak detection, large vacuum systems, vacuum metallurgy, vacuum materials and processing inclusive of applications of vacuum in industry. Large vacuum systems for high energy particle accelerators, plasma devices and light sources are of special significance for this symposium. Vacuum evaporation, hard coatings, thin films, joining techniques, sintering, melting and heat treatment, furnaces and thermo dynamics are also covered in this symposium. There were eighteen invited talks from the best experts in the respective fields and more than one hundred contributed papers. This fact itself indicates the interest that has been generated amongst the scientists, technologists and industrialists in this field. In view of the industrial significance of the vacuum technology, an exhibition of vacuum and vacuum processing related

  16. Application of the Exergy UCG technology in international UCG projects

    Science.gov (United States)

    Blinderman, M. S.

    2017-07-01

    Underground Coal Gasification is a subject of continuing global interest in the energy sector. While the international scenario in UCG is promising, it is deeply desirable that advances in this area are seen in India as well. This is particularly so with the Paris Climate Agreement bringing in more stringent challenges for clean energy development. India has many potential coal basins which may be suitable for UCG deployment. India is in dire need of indigenous source of gaseous and liquid hydrocarbons that could compete with imported products. It is also the country with exceptionally large and diverse coal and lignite resources, large part of which could not be mined due to geological complexity and prohibitive cost. Thus, there is a rationale that the εUCG™ technology plays a decisive role in realizing the potential of Indian coal resources for the benefit of Indian industry and population. This article has been adapted by Dr. Ajay K. Singh from a lecture delivered at the “Workshop on Challenges and Opportunities of Underground Coal Gasification”, Vigyan Bhawan, New Delhi on 14 February 2017.

  17. International energy technology collaboration: wind power integration into electricity systems

    International Nuclear Information System (INIS)

    Justus, D.

    2006-01-01

    A rapid growth of wind power since the 1990s has led to notable market shares in some electricity markets. This growth is concentrated in a few countries with effective Research, Development and Demonstration (RD and D) programmes and with policies that support its diffusion into the market place. The speed and depth of its penetration in these electricity markets have amplified the need to address grid integration concerns, so as not to impede the further penetration of wind power. Research on technologies, tools and practices for integrating large amounts of wind power into electricity supply systems is attempting to respond to this need. In recent years, existing international collaborative research efforts have expanded their focus to include grid integration of wind power and new consortia have been formed to pool knowledge and resources. Effective results benefit a few countries that already have a significant amount of wind in their electricity supply fuel mix, as well as to the potential large markets worldwide. This paper focuses on the challenge of bringing significant amounts of intermittent generating sources into grids dominated by large central generating units. It provides a brief overview of the growth of wind power, mainly since 1990, the technical and operational issues related to integration and selected collaborative programmes underway to address grid integration concerns. (author)

  18. Underwater maintenance and inspection technology for reactor internals

    International Nuclear Information System (INIS)

    Kimura, M.; Sano, Y.; Sudou, A.; Konagai, C.; Okano, H.; Shima, S.

    1996-01-01

    It is becoming increasingly important to develop preventive maintenance technologies in addition to inspection, repair and maintenance technologies already developed. Those preventive maintenance technologies include fundamental technologies concerning residual stress improvement, surface metallurgical improvement, water chemistry improvement, welding and machining, and technology for execution concerning remote handling/automated machines. Toshiba is engaged in the development of fundamental and application technologies. This paper describes a shot peening and a laser peening as the residual stress improvement technology and a multipurpose maintenance robot and a visual inspection submersible as remote handling equipment for maintenance and inspection. (author)

  19. International Committee for Monitoring Assisted Reproductive Technology: world report on assisted reproductive technology, 2005.

    Science.gov (United States)

    Zegers-Hochschild, Fernando; Mansour, Ragaa; Ishihara, Osamu; Adamson, G David; de Mouzon, Jacques; Nygren, Karl G; Sullivan, Elizabeth A

    2014-02-01

    To analyze information on assisted reproductive technology (ART) performed worldwide and trends in outcomes over successive years. Cross-sectional survey on access, effectiveness, and safety of ART procedures performed in 53 countries during 2005. A total of 2,973 clinics from national and regional ART registries. Infertile women and men undergoing ART globally. Collection and analysis of international ART data. Number of cycles performed by country and region, including pregnancies, single and multiple birth rates, and perinatal mortality. Overall, 1,052,363 ART procedures resulted in an estimated 237,315 babies born. The availability of ART varied by country from 15 to 3,982 cycles per million of population. Of all initiated fresh cycles, 62.9% were intracytoplasmic sperm injection. The overall delivery rate per fresh aspiration was 19.6% and for frozen embryo transfer 17.4%, with a cumulative delivery rate of 23.9%. With wide regional variations, single embryo transfer represented 17.5% of cycles, and the proportion of deliveries with twins and triplets from fresh transfers was 23.6% and 1.5%, respectively. Systematic collection and dissemination of international ART data allows patients, health professionals, and policy makers to examine and compare the impact of reproductive strategies or lack of them as markers of reproductive health. Copyright © 2014 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  20. 76 FR 39811 - International Center for Technology Assessment and the Center for Food Safety; Noxious Weed...

    Science.gov (United States)

    2011-07-07

    ... dated July 18, 2002, the International Center for Technology Assessment and the Center for Food Safety... Inspection Service [Docket No. APHIS-2011-0081] International Center for Technology Assessment and the Center for Food Safety; Noxious Weed Status of Kentucky Bluegrass Genetically Engineered for Herbicide...

  1. Exploring Organisational Stratification and Technological Pedagogical Change: Cases of Technology Integration Specialists in Hong Kong International Schools

    Science.gov (United States)

    Woo, David James

    2015-01-01

    An international school may make organisational choices that divide the school by curriculum, grade-level, language and location. This article explores how a school's organisational stratification impacts how the school supports changing teaching and learning practices through technology. The article draws from case data of technology integration…

  2. Breaking the impasse in the international climate negotiations: The potential of green technologies

    International Nuclear Information System (INIS)

    Schreurs, Miranda A.

    2012-01-01

    The slow pace of progress in the international climate negotiations is contrasted by the dynamic changes occurring on the ground as competition among countries for green technology leadership heats up. China, Germany, Japan, and the United States all exhibit interest in being green technology leaders although the United States could fall behind due to lack of strong federal government support for climate action. - Highlights: ► International competition for green technology and energy leadership. ► Green energy technology policy in China, Germany, Japan, and the United States. ► Dealing with the international stalemate in the climate negotiations.

  3. International overview of seawater desalination plant by reverse osmosis technology

    OpenAIRE

    Kangwen, Shu

    2012-01-01

    Master's thesis in Environmental technology In a world faced with increased urbanization, population growth, climate change and degradation of water supplies, the importance of a reliable source of technology to provide fresh water emphasizes the importance of seawater desalination. Over the years a variety of seawater desalination methods have been developed throughout the world. The most common technologies available for desalination around the world are membrane reverse osmosis (RO),...

  4. International technology transfer for climate change mitigation and the cases of Russia and China

    International Nuclear Information System (INIS)

    Martinot, E.; Sinton, J.E.

    1997-01-01

    The environmental agenda for mitigating climate change through international transfers of technology is linked with a diverse literature, reviewed here within a framework that combines technological, agent/agenda, and market/transaction perspectives. Literature that bears on international technology transfer for climate change mitigation is similar in many ways for Russia and China: opportunities for energy efficiency and renewable energy, economic reform and restructuring, the difficulties enterprises face in responding to market conditions, international assistance policies, international joint ventures, market intermediation, and capacity building for market development. In both countries, capacity building means enhancing market-oriented capabilities in addition to technological capabilities. For Russia, institutional development is critical, such as new commercial legal codes and housing-sector changes beyond privatization. For China, technology policies and modernization programs significantly influence technology transfers. 234 refs., 3 tabs

  5. UNHCR and the pursuit of international protection: accountability through technology?

    DEFF Research Database (Denmark)

    Jacobsen, Katja Lindskov; Sandvik, Kristin B.

    2018-01-01

    -bureaucratic practices shape conceptions of international refugee protection. We do this by examining the evolving roles of results-based management (RBM), biometrics and cash-based interventions as ‘accountability technologies’ in the United Nations High Commissioner for Refugees’ international protection efforts...

  6. A technological contingency perspective on the depth and scope of international outsourcing

    NARCIS (Netherlands)

    Mol, M.J.; Pauwels, Pieter; Matthyssens, P.; Quintens, L.

    2004-01-01

    In this study, we present and test a technological contingency perspective on two dimensions of international outsourcing: depth and scope. The depth of international outsourcing refers to the ratio of foreign to total outsourcing. The scope of international outsourcing captures the degree of

  7. International Linear Collider Steering Committee issues charge to Technology Recommendation Panel

    CERN Multimedia

    2003-01-01

    "Following its November 19 meeting in Paris, the International Linear Collider Steering Committee, a subcommittee of the International Committee for Future Accelerators, has published the charge http://www.fnal.gov/directorate/icfa/ITRP_Charge.pdf to the International Technology Recommendation Panel appointed by ICFA" (2 paragraphs).

  8. International technology transfer: building theory from a multiple case-study in the aircraft industry

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2005-01-01

    International technology transfer occurs frequently in international operations, for example in cases of foreign direct investment where companies set-up existing manufacturing lines in new locations. It also occurs in situations of international outsourcing where a new supplier receives product

  9. Technology Outlook for International Schools in Asia, 2014. An NMC Horizon Project Regional Report

    Science.gov (United States)

    Johnson, L.; Adams Becker, S.; Cummins, M.; Estrada, V.

    2014-01-01

    This report is a collaborative research effort between the New Media Consortium (NMC), Concordia International School Shanghai, and NIST International School in Bangkok, Thailand, to help inform international school leaders in Asia about significant developments in technologies supporting teaching, learning, and creative inquiry in primary and…

  10. 76 FR 5834 - International Business Machines Corporation, Global Technology Services Business Unit, Integrated...

    Science.gov (United States)

    2011-02-02

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,248] International Business..., applicable to workers of International Business Machines Corporation, Global Technology Services Business... certification to include workers in the Payroll, Travel, and Mobility Services Team of International Business...

  11. New media, old media: The technologies of international development

    Science.gov (United States)

    Ingle, Henry T.

    1986-09-01

    The research, theory and practice of educational technology over the past 75 years provide convincing evidence that this process offers a comprehensive and integrated approach to solving educational and social problems. The use of media and technology in development has shifted from an emphasis on mass media to personal media. A variety of electronic delivery systems are being used and are usually coordinated by centralized governmental agencies. There are no patterns of use since the problems vary and the medium used is responsive to the problem. Computers are used most frequently and satellite telecommunication networks follow. The effective use of these and other technologies requires a long-term commitment to financial support and training of personnel. The extension model of face-to-face contact still prevails in developing nations whether in agriculture, education or rural development. Low-cost technologies are being used in local projects while major regional and national companies use radio, film and related video technologies. The use of all available and cost-effective media and technologies make possible appropriate communications for specific goals with specific audiences. There appears to be no conflict among proponents of various media formats. Development in education and other sectors has much to gain from old and new communication technologies and has hardly been tapped. Several new educational technology developments are discussed as potential contributors to formal and nonformal education.

  12. Summary of the second international conference on electrostatic accelerator technology

    International Nuclear Information System (INIS)

    Wegner, H.E.

    1977-01-01

    A review is given of the history of electrostatic accelerator technology, including a technology assessment of acceleration tubes, vacuum systems, voltage gradients, charging systems, and ion sources. Improvements in the performance of electrostatic accelerators during the last four years and of those currently under construction are discussed. The improved performance has greatly expanded the heavy ion research capabilities of the entire research community

  13. Technology Policy and Practice in Africa | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    African economies need deep technological revolutions to bring about rapid structural shifts, to deepen their industry, and build up their endogenous technological capability. The case studies presented here demonstrate the need to pay greater attention to an enabling macroeconomic environmentand the ways that ...

  14. Science, Technology, and Innovation in Chile | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    With this in mind, and following a conversation between Canadian Prime Minister Jean Chrétien and Chilean President Eduardo Frei in 1997, IDRC and the Chilean National Council for Science and Technology (CONICYT) agreed to collaborate in a review of Chile's policies and programs in science and technology.

  15. Information Technology-Based Innovation in International Marketing Education: An Exploration of Two Learning Environments

    Science.gov (United States)

    Sinkovics, Rudolf R.; Haghirian, Parissa; Yu, Shasha

    2009-01-01

    Information technology (IT) innovations have and continue to have a significant impact on international marketing practice and customer interactions. With the marketing environment becoming increasingly dependent on technology, marketing teaching in higher education faces a challenging task of effectively leveraging technology in diverse learning…

  16. International committee for monitoring assisted reproductive technologies: world report on assisted reproductive technologies, 2007.

    Science.gov (United States)

    Ishihara, Osamu; Adamson, G David; Dyer, Silke; de Mouzon, Jacques; Nygren, Karl G; Sullivan, Elizabeth A; Zegers-Hochschild, Fernando; Mansour, Ragaa

    2015-02-01

    To analyze information on assisted reproductive technology (ART) performed worldwide, and trends in outcomes over successive years. Cross-sectional survey on access, efficiency, and safety of ART procedures performed in 55 countries during 2007. Not applicable. Infertile women and men undergoing ART globally. Collection and analysis of international ART data. Number of cycles performed, by country and region, including pregnancies, single and multiple birth rates, and perinatal mortality. Overall, >1,251,881 procedures with ART were reported, and resulted in 229,442 reported babies born. The availability of ART varied by country, from 12 to 4,140 treatments per million population. Of all aspiration cycles, 65.2% (400,617 of 614,540) were intracytoplasmic sperm injection. The overall delivery rate per fresh aspiration was 20.3%, and for frozen-embryo transfer (FET), 18.4%, with a cumulative delivery rate of 25.8%. With wide regional variations, single-embryo transfer represented 23.4% of fresh transfers, and the proportion of deliveries with twins and triplets from fresh transfers was 22.3% and 1.2%, respectively. The perinatal mortality rate was 19.9 per 1,000 births for fresh in vitro fertilization using intracytoplasmic sperm injection, and 9.6 per 1,000 for FET. The proportion of women aged ≥40 years increased to 19.8% from 15.5% in 2006. The international trend toward women aged >40 years was a major component of ART services in some regions and countries. Copyright © 2015 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  17. Physics and technology of superthin internal targets in storage rings

    International Nuclear Information System (INIS)

    Popov, S.G.

    1989-01-01

    The new generation of accelerators for coincidence electronuclear investigations is discussed. The luminosity and beam parameters are calculated for an electron storage ring with an internal target operating in the superthin regime. The advantages and disadvantages in comparison with conventional operation using an external beam and target are described. The intermediate results for 2 GeV electron scattering on polarized internal deuterium target are given (joint Novosibirsk-Argonne experiment). 32 refs.; 5 figs

  18. New trends in science and technology implications for international peace and security

    International Nuclear Information System (INIS)

    1991-01-01

    In December 1988, the General Assembly requested the Secretary-General to follow future scientific and technological developments, especially those with potential military applications, and to evaluate their impact on international security. In resolution 43/77 A it also requested the Secretary-General to report to it at its forty-fifth session. The broad fields in which scientific and technological developments are taking place were identified as: information technology, biotechnology, materials technology, nuclear technology and space technology. These assessments were discussed by a wider group of experts at a high-level conference on ''New trends in science and technology: implications for international peace and security'', held in April 1990 in the city of Sendai, Japan. The Conference, which was attended by nearly 100 participants from over 20 countries, addressed issues of technological change and global security, new technologies and the search for security in the post-cold-war era, and national policy-making and international diplomacy in an era of rapid technological change. General approaches to technology assessment and technology trends in selected areas were also discussed. The positions taken by Member States on the subject of establishing a mechanism for technology assessment were also taken into account. The highlights of the report are summarized

  19. 2nd International Conference on Robot Intelligence Technology and Applications

    CERN Document Server

    Matson, Eric; Myung, Hyun; Xu, Peter; Karray, Fakhri

    2014-01-01

    We are facing a new technological challenge on how to store and retrieve knowledge and manipulate intelligence for autonomous services by intelligent systems which should be capable of carrying out real world tasks autonomously. To address this issue, robot researchers have been developing intelligence technology (InT) for “robots that think” which is in the focus of this book. The book covers all aspects of intelligence from perception at sensor level and reasoning at cognitive level to behavior planning at execution level for each low level segment of the machine. It also presents the technologies for cognitive reasoning, social interaction with humans, behavior generation, ability to cooperate with other robots, ambience awareness, and an artificial genome that can be passed on to other robots. These technologies are to materialize cognitive intelligence, social intelligence, behavioral intelligence, collective intelligence, ambient intelligence and genetic intelligence. The book aims at serving resear...

  20. Informing international UNFCCC technology mechanisms from the ground up: Using biogas technology in South Africa as a case study to evaluate the usefulness of potential elements of an international technology agreement in the UNFCCC negotiations process

    International Nuclear Information System (INIS)

    Boyd, Anya

    2012-01-01

    Transfer of low carbon technologies to developing countries is 1 approach for tackling rising global emissions. An international technology transfer mechanism has been proposed under the UNFCCC; however, it remains unclear how this international mechanism would translate into local level technology implementation. This study uses biogas technology in South Africa to obtain empirical data inductively related to technology transfer. Observations and activities specific to the biogas sector in South Africa are put forward based on site visits and stakeholder discussions in South Africa, the UK, Germany and Sweden. This paper presents empirical findings on technology transfer in the biogas sector in South Africa and analyses the role of an international technology mechanism in supporting the uptake of biogas. Many of the barriers to biogas technology in South Africa are national level constraints such as lack of supportive policy environment, financial incentives and information sharing. This case study supports the argument that it will be unrealistic for international technology mechanisms to capture the necessary specificities of individual technologies at a country level. Therefore, as demonstrated through the example of biogas technology in South Africa, there is a need for both effective national and international engagement to support technology implementation. - Highlights: ► The UNFCCC technology mechanism aims to increase low carbon technology deployment. ► The interface of global technology frameworks and national implementation is unclear. ► Biogas is a widely used technology yet its uptake in South Africa (SA) is minimal. ► Empirical data is gathered from biogas sites in SA, UK, Germany and Sweden. ► Findings show biogas uptake in SA requires national and international support

  1. International Symposium on Magnetic Suspension Technology, Part 2

    Science.gov (United States)

    Groom, Nelson J. (Editor); Britcher, Colin P. (Editor)

    1992-01-01

    In order to examine the state of technology of all areas of magnetic suspension and to review related recent developments in sensors and controls approaches, superconducting magnet technology, and design/implementation practices, a symposium was held. The proceedings are presented. The sessions covered the areas of bearings, sensors and controls, microgravity and vibration isolation, superconductivity, manufacturing applications, wind tunnel magnetic suspension systems, magnetically levitated trains (MAGLEV), space applications, and large gap magnetic suspension systems.

  2. International Conference on New Technologies in the Humanities and Fourth International Conference on Optics Within Life Sciences

    CERN Document Server

    Bally, Gert

    1997-01-01

    New high-tech developments in the field of optics show increasing applicability not only in classical technological fields but also in the humanities. This book contains selected contributions to an international, interdisciplinary joint conference on "New Technologies in the Humanities" and "Optics Within Life Sciences". Its objective is to forward interdisciplinary information and communication between specialists in optics as well as in medicine, biology, environmental sciences, and cultural heritage. It is unique as a presentation of new optical technologies for cultural heritage protection. The contributions cover international research activities in the areas of archaeological research and new technologies, holography and interferometry, material analysis, laser cleaning, pattern recognition, unconventional microscopy, spectroscopial techniques, and profilometry.

  3. International and domestic technology transfers and productivity growth: Empirical evidence for Flanders

    OpenAIRE

    Belderbos, Rene; Van Roy, Vincent; Duvivier, Florence

    2008-01-01

    We examine the drivers of international and domestic technology transfer strategies of firms and the impact of these transfers on firms’ productivity performance in a sample of 457 Flemish innovating firms during 2003-2006. We use data on innovating firms from the 4th Community Innovation Survey for Flanders. In this survey, responding firms indicate whether they sourced technology externally and if so, whether the source of this technology was domestic or foreign. Technology transfers may oc...

  4. The Importance of Localized Related Variety for International Diversification of Corporate Technology

    DEFF Research Database (Denmark)

    Dettmann, Eva; Lacasa, Iciar Dominguez; Günther, Jutta

    2016-01-01

    technological activities. The estimations show that this is the case in regions characterized by a high overall technological strength. This suggests that related variety facilitates technological diversifications of foreign corporations in regions at the top of the geographic hierarchy......The importance of localized related variety for international diversification of corporate technology, Regional Studies. Internationalization of research and development has increased substantially in recent years. This paper analyses the determinants of spatial distribution of foreign...

  5. Enhancing international technology cooperation for climate change mitigation. Lessons from an electromobility case study

    Energy Technology Data Exchange (ETDEWEB)

    Bhasin, Shikha

    2014-07-01

    As a global agreement on climate mitigation and absolute emissions reductions remains grid-locked, this paper assesses whether the prospects for international technology cooperation in low-carbon sectors can be improved. It analyses the case of international cooperation on electric vehicle technologies to elaborate on the trade-offs that cooperation such as this inherently attempts to balance- national growth objectives of industrial and technology development versus the global goods benefit of reducing greenhouse gas (GHG) emissions. It focuses on bilateral German-Chinese programmes for electric vehicle development, as well as multilateral platforms on low-carbon technology cooperation related to electric vehicles. Based on insights from these cases studies, this paper ultimately provides policy recommendations to address gaps in international technology cooperation at a bilateral level for ongoing German-Chinese engagement on electric vehicles; and at a multilateral level with a focus on the emerging technology cooperation framework of the United Nations Framework Convention on Climate Change (UNFCCC).

  6. International workshop on greenhouse gas mitigation technologies and measures: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    More than 150 countries are now Party to the United Nations Framework Convention on Climate Change (FCCC), which seeks to stabilize atmospheric concentrations of greenhouse gases at a level that would prevent dangerous human interference with the global climate system. Climate change country studies are a significant step for developing countries and countries with economies in transition to meet their national reporting commitments to the FCCC. These studies also provide the basis for preparation of National Climate Change Action Plans and implementation of technologies and practices which reduce greenhouse gas emissions or enhance carbon sinks. The broad goals of the workshop were to: (1) present results of country study mitigation assessments, (2) identify promising no-regrets greenhouse gas mitigation options in land-use and energy sectors, (3) share information on development of mitigation technologies and measures which contribute to improved National Climate Change Actions Plans, and (4) begin the process of synthesizing mitigation assessments for use by FCCC subsidiary bodies. The 59 papers are arranged into the following topical sections: (1) national mitigation assessments, technology priorities, and measures; (2) sector-specific mitigation assessment results, subdivided further into: energy sector; non-energy sector; renewable energy; energy efficiency in industry and buildings; transportation; electricity supply; forestry; and methane mitigation; (3) support for mitigation technologies and measures; and (4) activities implemented jointly. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  7. New Media Technology in Developing Effective Organizational Internal Communication

    Directory of Open Access Journals (Sweden)

    Nur Kholisoh

    2017-01-01

    Full Text Available The article was intended to investigate various benefits of Whatsapp Messenger application for an effective intenal communication in PT Euro Management Indonesia. In addition, this research also aimed to map the organizational internal communication pattern through the use of Whatsapp Messenger application. The research used theories of organizaional communication, new media communication pattern, and computer mediated communication (CMC. Moreover, paradigm used in the research was constructivist with qualitative approach and the research method was case study. The research result finds that the use of new media Whatsapp Messenger as a tool of communication can build effective internal communication in PT Euro Management Indonesia. Moreover, it also shows that the internal organizational communication pattern in PT Euro Management Indonesia used in Whatsapp Messenger application is conversation pattern.

  8. International Conference on Sustainable Vital Technologies in Engineering and Informatics

    CERN Document Server

    Hassan, Maguid

    2017-01-01

    This book reports on cutting-edge technologies that have been fostering sustainable development in a variety of fields, including built and natural environments, structures, energy, advanced mechanical technologies as well as electronics and communication technologies. It reports on the applications of Geographic Information Systems (GIS), Internet-of-Things, predictive maintenance, as well as modeling and control techniques to reduce the environmental impacts of buildings, enhance their environmental contribution and positively impact the social equity. The different chapters, selected on the basis of their timeliness and relevance for an audience of engineers and professionals, describe the major trends in the field of sustainable engineering research, providing them with a snapshot of current issues together with important technical information for their daily work, as well as an interesting source of new ideas for their future research. The works included in this book were selected among the contributions...

  9. International Symposium on Magnetic Suspension Technology, Part 1

    Science.gov (United States)

    Groom, Nelson J. (Editor); Britcher, Colin P. (Editor)

    1992-01-01

    The goal of the symposium was to examine the state of technology of all areas of magnetic suspension and to review related recent developments in sensors and controls approaches, superconducting magnet technology, and design/implementation practices. The symposium included 17 technical sessions in which 55 papers were presented. The technical session covered the areas of bearings, sensors and controls, microgravity and vibration isolation, superconductivity, manufacturing applications, wind tunnel magnetic suspension systems, magnetically levitated trains (MAGLEV), space applications, and large gap magnetic suspension systems.

  10. Second Karlsruhe international conference on analytical chemistry in nuclear technology

    International Nuclear Information System (INIS)

    1989-01-01

    Around 180 abstracts of invited lectures and poster presentations of the international analytical conference are presented in this book. They cover analytical applications throughout the fuel cycle and radioanalysis of manifold materials. Most of the abstracts are prepared separately for input in INIS and EDB. (RB)

  11. Opportunities for international research collaboration in wood science and technology

    Science.gov (United States)

    Chung-Yun Hse

    2013-01-01

    In 2008, SWST moved to hold their annual convention alternatively between North America and international locations. Soon thereafter, we are here in China for the 2012 SWST annual meeting. Although I was born in Taiwan, which is located some 112 miles off the southeastern coast of China across the Taiwan Strait, people on both sides of the Taiwan Strait are all...

  12. Technology, Gender, and Power in Africa | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Part III identifies issues and inter-relations that have not been addressed in previous research and suggests promising ways to frame future research on women and technology in Africa. The social, economic,and technical empowerment of women at the community level is seen as vital to effective development efforts.

  13. Technology Enhanced Learning in Programming Courses--International Perspective

    Science.gov (United States)

    Ivanovic, Mirjana; Xinogalos, Stelios; Pitner, Tomáš; Savic, Miloš

    2017-01-01

    Technology enhanced learning (TEL) is increasingly influencing university education, mainly in overcoming disadvantages of direct instruction teaching approaches, and encouraging creativity, problem solving and critical thinking in student-centered, interactive learning environments. In this paper, experiences from object-oriented programming…

  14. International Technology Diffusion of Joint and Cross-border Patents

    NARCIS (Netherlands)

    C-L. Chang (Chia-Lin); M.J. McAleer (Michael); J-T. Tang (Ju-Ting)

    2013-01-01

    textabstractWith the advent of globalization, economic and financial interactions among countries have become widespread. Given technological advancements, the factors of production can no longer be considered to be just labor and capital. In the pursuit of economic growth, every country has

  15. International Technology Diffusion of Joint and Cross-border Patents

    NARCIS (Netherlands)

    C-L. Chang (Chia-Lin); M.J. McAleer (Michael); J-T. Tang (Ju-Ting)

    2015-01-01

    markdownabstract__Abstract__ With the advent of globalization, economic and financial interactions among countries have become widespread. Given technological advancements, the factors of production can no longer be considered to be just labor and capital. In the pursuit of economic growth,

  16. AFRREV STECH: An International Journal of Science and Technology

    African Journals Online (AJOL)

    Nigerian teachers' perception of barriers to technology integration into the chemistry instructions · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. AE Okanlawon, 172-195. http://dx.doi.org/10.4314/stech.v3i2.11 ...

  17. International Technology Diffusion of Joint and Cross-border Patents

    NARCIS (Netherlands)

    C-L. Chang (Chia-Lin); M.J. McAleer (Michael); J-T. Tang (Ju-Ting)

    2015-01-01

    markdownabstract__Abstract__ With the advent of globalization, economic and financial interactions among countries have become widespread. Given technological advancements, the factors of production can no longer be considered to be just labor and capital. In the pursuit of economic growth, every

  18. Science, Technology, and the Quest for International Influence

    Science.gov (United States)

    2009-09-01

    not hew to duty, especially when no one is looking. Endnotes 1 Robert Gilpin , France in...Captain Robert Conrad, the first Planning Director and contracts officer for ONR. Conrad understood the importance of science and technology...nation, they come at a cost if a scientific specialist abandons his area of expertise to create geopolitically astute regional profiles for general

  19. International water and sanitation technology transfers, experiences from Europe

    NARCIS (Netherlands)

    Krozer, Yoram; Hophmayer Tokich, Sharon

    2016-01-01

    Possibilities of transferring cost-effective, innovative water and wastewater technologies on public water markets are discussed based on experiences of the Dutch water business cluster in the Central and Eastern European Countries. These transfers evolved under suitable conditions, among others

  20. International Journal of Science and Technology (STECH) Bahir Dar ...

    African Journals Online (AJOL)

    Nneka Umera-Okeke

    The management corruption and inefficiency are still the order of the day. The paper was of the opinion .... owned by NITEL for the stay of its managing Director in NICON Hilton Hotel (The. Sun Newspaper of 10th ... to establish infrastructures that will generate technological development programmes that will provide certain ...

  1. III International Conference on Laser and Plasma Researches and Technologies

    Science.gov (United States)

    2017-12-01

    A.P. Kuznetsov and S.V. Genisaretskaya III Conference on Plasma and Laser Research and Technologies took place on January 24th until January 27th, 2017 at the National Research Nuclear University "MEPhI" (NRNU MEPhI). The Conference was organized by the Institute for Laser and Plasma Technologies and was supported by the Competitiveness Program of NRNU MEPhI. The conference program consisted of nine sections: • Laser physics and its application • Plasma physics and its application • Laser, plasma and radiation technologies in industry • Physics of extreme light fields • Controlled thermonuclear fusion • Modern problems of theoretical physics • Challenges in physics of solid state, functional materials and nanosystems • Particle accelerators and radiation technologies • Modern trends of quantum metrology. The conference is based on scientific fields as follows: • Laser, plasma and radiation technologies in industry, energetic, medicine; • Photonics, quantum metrology, optical information processing; • New functional materials, metamaterials, “smart” alloys and quantum systems; • Ultrahigh optical fields, high-power lasers, Mega Science facilities; • High-temperature plasma physics, environmentally-friendly energetic based on controlled thermonuclear fusion; • Spectroscopic synchrotron, neutron, laser research methods, quantum mechanical calculation and computer modelling of condensed media and nanostructures. More than 250 specialists took part in the Conference. They represented leading Russian scientific research centers and universities (National Research Centre "Kurchatov Institute", A.M. Prokhorov General Physics Institute, P.N. Lebedev Physical Institute, Troitsk Institute for Innovation and Fusion Research, Joint Institute for Nuclear Research, Moscow Institute of Physics and Tecnology and others) and leading scientific centers and universities from Germany, France, USA, Canada, Japan. We would like to thank heartily all of

  2. Incentives to strengthen international co-operation in R and D for advanced nuclear power technology

    International Nuclear Information System (INIS)

    Versteegh, A.M.; Balthesen, E.; Bakunyaev, A.D.; Gibson, I.H.; Tavoni, R.

    1993-09-01

    The paper identifies the main areas which need strong international collaboration: development of innovative safety features; improvement of fuel characteristics and efficiency; dose reduction techniques; use of technology developed for other purposes; common assessments of design proposals. (orig./HP)

  3. International survey on attitudes toward ethics in health technology assessment: An exploratory study

    NARCIS (Netherlands)

    Arellano, L.E.; Willett, J.M.; Borry, P.

    2011-01-01

    Objectives: The objective of this exploratory study was to survey international health technology assessment (HTA) professionals to determine attitudes toward ethics in HTA. Methods: An exploratory, quantitative, cross-sectional study design was developed. The sample population (n = 636) was

  4. Assessing Space Exploration Technology Requirements as a First Step Towards Ensuring Technology Readiness for International Cooperation in Space Exploration

    Science.gov (United States)

    Laurini, Kathleen C.; Hufenbach, Bernhard; Satoh, Maoki; Piedboeuf, Jean-Claude; Neumann, Benjamin

    2010-01-01

    Advancing critical and enhancing technologies is considered essential to enabling sustainable and affordable human space exploration. Critical technologies are those that enable a certain class of mission, such as technologies necessary for safe landing on the Martian surface, advanced propulsion, and closed loop life support. Others enhance the mission by leading to a greater satisfaction of mission objectives or increased probability of mission success. Advanced technologies are needed to reduce mass and cost. Many space agencies have studied exploration mission architectures and scenarios with the resulting lists of critical and enhancing technologies being very similar. With this in mind, and with the recognition that human space exploration will only be enabled by agencies working together to address these challenges, interested agencies participating in the International Space Exploration Coordination Group (ISECG) have agreed to perform a technology assessment as an important step in exploring cooperation opportunities for future exploration mission scenarios. "The Global Exploration Strategy: The Framework for Coordination" was developed by fourteen space agencies and released in May 2007. Since the fall of 2008, several International Space Exploration Coordination Group (ISECG) participating space agencies have been studying concepts for human exploration of the moon. They have identified technologies considered critical and enhancing of sustainable space exploration. Technologies such as in-situ resource utilization, advanced power generation/energy storage systems, reliable dust resistant mobility systems, and closed loop life support systems are important examples. Similarly, agencies such as NASA, ESA, and Russia have studied Mars exploration missions and identified critical technologies. They recognize that human and robotic precursor missions to destinations such as LEO, moon, and near earth objects provide opportunities to demonstrate the

  5. Study on international publicity and export strategy establishment of nuclear technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ji Bok; Choi, C.O.; Park, K. B.; Chang, M. H.; Kim, K. K.; Yang, M. S.; Jung, I. H.; Kim, K. P.; Wu, J. S.; Jang, C. I.; Han, B. O.; Sim, J. H.; Chung, M.; Chung, J.K

    1999-05-01

    The objective of this study is to devise a proper measure for international publicity and technology export strategy. Analysed and summaries in detail are other countries nuclear policy trend and the current technology development status of Korea Standard Nuclear Plant that we developed on our own technology, design and construction technology for research reactor, System-integrated Modular Advanced Reactor of which design is in progress, Direct use of Spent PWR Fuel in CANDU Reactors, and Radioisotopes. Based on that, the measures are proposed for the export industrialization of nuclear technology and establishment of the export basis. Also the international nuclear cooperation and publicity strategy are suggested to support the technology export basis. By surveying the world nuclear status, the direction for the international cooperation and publicity is settled and the specific publicity strategy is proposed for the cooperation with IAEA and multi-countries and the establishment of the nuclear technology export basis. As part of this project, the panel on major technologies such as Korea Standard Nuclear Plant, HANARO, and System-integrated Modular Advanced Reactor was displayed successfully at the IAEA meeting, which contribute much to the publicity of our nuclear technology to the international nuclear society. (author)

  6. Casting technology for ODS steels - the internal oxidation approach

    Science.gov (United States)

    Miran, S.; Franke, P.; Möslang, A.; Seifert, H. J.

    2017-07-01

    The formation of stainless ODS steel by internal oxidation of as-cast steel has been investigated. An alloy (Fe-16Cr-0.2Al-0.05Y, wt.%) was embedded in a (VO/V2O3) powder mixture serving as an oxygen activity buffer and heat treated at 1450 °C for 20 h. After this procedure no oxide scale was present on the surface of the sample but a zone of internal oxidation with a depth of about 2000 μm was formed in its interior. The precipitates within this zone consisted of two types of oxides. Discrete aluminium oxide particles with a size of a few micrometres were formed in outer regions of the specimen. Finer aluminium-yttrium oxides with a size of some hundred nanometres were mainly precipitated in inner regions of the sample. The results can be considered as a promising step towards an alternative production route for ODS steels.

  7. 9th International Conference on Multimedia and Ubiquitous Engineering and the 10th International Conference on Future Information Technology

    CERN Document Server

    Chao, Han-Chieh; Arabnia, Hamid; Yen, Neil; Advanced Multimedia and Ubiquitous Engineering : Future Information Technology; MUE-15; FutureTech 2015

    This volume brings together contributions representing the state-of-the-art in new multimedia and future technology information research, currently a major topic in computer science and electronic engineering. Researchers aim to interoperate multimedia frameworks, transforming the way people work and  interact with multimedia data. This book covers future information technology topics including digital and multimedia convergence, ubiquitous and pervasive computing, intelligent computing and applications, embedded systems, mobile and wireless communications, bio-inspired computing, grid and cloud computing, semantic web, human-centric computing and social networks, adaptive and context-aware computing, security and trust computing and related areas.  Representing the combined proceedings of the 9th International Conference on Multimedia and Ubiquitous Engineering (MUE-15) and the 10th International Conference on Future Information Technology (FutureTech 2015), this book aims to provide a complete coverage of...

  8. Proceedings of eleventh annual environmental management and technology conference/international

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    The Eleventh Annual Environmental Management and Technology Conference International was held as part of the Environmental Management and Technology Conference & Exhibition/International, June 9-11, 1993 in Atlantic City, New Jersey. The Conference was organized around a number of topics including: Environmental Policy and Policy-making; Innovative approaches to remediation; Treatment and destruction of hazardous waste; Contaminated site development; Remediation technologies; Public comprehension of risk; Recycling; Environmental instrumentation; OSHA Regulations update; International environmental business opportunities; Managing hazardous waste remediation projects; Emergency response programs; Air pollution control technologies; Environmental managers of the future; Hazardous waste treatment and disposal; RCRA and RCRA facility investigation; Market penetration by environmental technologies; and, Pollution prevention engineering.

  9. Technology Policy and Practice in Africa | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Osita M. Ogbu a un doctorat en sciences économiques de l'Université Howard et a été économiste chercheur au Département technique de l'Afrique à la Banque mondiale à Washington. Il est administrateur régional principal de programmes au Centre de recherches pour le développement international, notamment ...

  10. 1st International Conference on Information and Communication Technology for Intelligent Systems

    CERN Document Server

    Das, Swagatam

    2017-01-01

    This volume contains 59 papers presented at ICTIS 2015: International Conference on Information and Communication Technology for Intelligent Systems. The conference was held during 28th and 29th November, 2015, Ahmedabad, India and organized communally by Venus International College of Technology, Association of Computer Machinery, Ahmedabad Chapter and Supported by Computer Society of India Division IV – Communication and Division V – Education and Research. This volume contains papers mainly focused on ICT for Computation, Algorithms and Data Analytics etc.

  11. International Committee for Monitoring Assisted Reproductive Technologies world report: Assisted Reproductive Technology 2008, 2009 and 2010.

    Science.gov (United States)

    Dyer, S; Chambers, G M; de Mouzon, J; Nygren, K G; Zegers-Hochschild, F; Mansour, R; Ishihara, O; Banker, M; Adamson, G D

    2016-07-01

    What were utilization, outcomes and practices in assisted reproductive technology (ART) globally in 2008, 2009 and 2010? Global utilization and effectiveness remained relatively constant despite marked variations among countries, while the rate of single and frozen embryo transfers (FETs) increased with a concomitant slight reduction in multiple birth rates. ART is widely practised in all regions of the world. Monitoring utilization, an approximation of availability and access, as well as effectiveness and safety is an important component of universal access to reproductive health. This is a retrospective, cross-sectional survey on utilization, effectiveness and safety of ART procedures performed globally from 2008 to 2010. Between 58 and 61 countries submitted data from a total of nearly 2500 ART clinics each year. Aggregate country data were processed and analyzed based on forms and methods developed by the International Committee for Monitoring Assisted Reproductive Technologies (ICMART). Results are presented at country, regional and global level. For the years 2008, 2009 and 2010, >4 461 309 ART cycles were initiated, resulting in an estimated 1 144 858 babies born. The number of aspirations increased by 6.4% between 2008 and 2010, while FET cycles increased by 27.6%. Globally, ART utilization remained relatively constant at 436 cycles/million in 2008 and 474 cycles/million population in 2010, but with a wide country range of 8-4775 cycles/million population. ICSI remained constant at around 66% of non-donor aspiration cycles. The IVF/ICSI combined delivery rate (DR) per fresh aspiration was 19.8% in 2008; 19.7% in 2009 and 20.0% in 2010, with corresponding DRs for FET of 18.8, 19.7 and 20.7%. In fresh non-donor cycles, single embryo transfer increased from 25.7% in 2008 to 30.0% in 2010, while the average number of embryos transferred fell from 2.1 to 1.9, again with wide regional variation. The rates of twin deliveries following fresh non-donor transfers

  12. International conference on comparative assessments of solar power technologies

    International Nuclear Information System (INIS)

    Roy, A.

    1994-02-01

    Many regions in the world which lack fossil fuel resources but possess ample sunshine seek to identify near-term solar technologies capable of gradually replacing their fuel imports in cost-effective fashion. The conference addresses the following topics: technical and economical studies specifying their underlying basic assumption, methods and rules for evaluation in order to enable meaningful comparison between different technologies and systems. Detailed delineation of numerical and graphical representations, critical analysis and comparison between simulations, and test validity. Generalized performance indicators for systems and subsystems, problems of measuring and evaluating physical parameters, of terminology and conceptual tools for comparative evaluations. Advances in research development, engineering and field performance, including implications pertaining to comparative assessments and definitions of criteria and standards helpful to comparative evaluation. Assessments of the full (and hidden) cost of fossil energies as compared to solar, including environmental costs. Cost/benefit studies for remote versus centralized systems. (ed.)

  13. 5th International Conference on Advanced Manufacturing Engineering and Technologies

    CERN Document Server

    Jakovljevic, Zivana; NEWTECH2017

    2017-01-01

    This book presents the proceedings from the 5th NEWTECH conference (Belgrade, Serbia, 5–9 June 2017), the latest in a series of high-level conferences that bring together experts from academia and industry in order to exchange knowledge, ideas, experiences, research results, and information in the field of manufacturing. The range of topics addressed is wide, including, for example, machine tool research and in-machine measurements, progress in CAD/CAM technologies, rapid prototyping and reverse engineering, nanomanufacturing, advanced material processing, functional and protective surfaces, and cyber-physical and reconfigurable manufacturing systems. The book will benefit readers by providing updates on key issues and recent progress in manufacturing engineering and technologies and will aid the transfer of valuable knowledge to the next generation of academics and practitioners. It will appeal to all who work or conduct research in this rapidly evolving field.

  14. Proceedings of the second international symposium on nonconventional energy technology

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    This book presents the papers given at a symposium on emerging energy systems. Topics considered at the symposium included a quantum ramjet for interstellar flight, oil and gas exploration, advanced propulsion technology, motional field generators, electromagnetics, the fundamental properties of matter, magnetic monopoles, controlled fusion, ball lighting, homopolar faraday generator, free energy, fundamental ac energy and power measurement techniques in non-conventional energy, advanced alternators, ambient temperature superconducting filaments, and geometrical models of field wave forms.

  15. 7th international conference on Nuclear microprobe technology and applications

    International Nuclear Information System (INIS)

    2000-01-01

    This colloquium gives an up-to-date report on the continuously advancing applications and development of microbeam technology. It presents abstracts and oral contributions in the following domains: microprobes facilities, analysis techniques, imaging techniques, micro-ion beam modification of materials, microelectronics, applications in Material Sciences in Biology in Medicine in earth and planetary Sciences in environment in art in archaeology, alternative techniques. (A.L.B.)

  16. UNHCR and the pursuit of international protection: accountability through technology?

    DEFF Research Database (Denmark)

    Jacobsen, Katja Lindskov; Sandvik, Kristin B.

    2018-01-01

    Better management and new technological solutions are increasingly portrayed as the way to improve refugee protection and enhance the accountability of humanitarian actors. Taking concepts of legibility, quantification and co-production as the point of departure, this article explores how techno...... of protection (ie the problem to be addressed), we also show what dimensions of protection get omitted in this co-production of technical solutions and socio-political problems....

  17. II International Conference on Plasma and Laser Research and Technologies

    International Nuclear Information System (INIS)

    Kurnaev, V A; Dodulad, E I

    2016-01-01

    II Conference on Plasma and Laser Research and Technologies took place on January 25 th until January 27 th , 2016 at National Research Nuclear University “MEPhI” (NRNU MEPhI). It was organized by the Institute of Laser and Plasma Technologies and was supported by the Competitiveness Program of NRNU MEPhI. The Conference consisted of four sections: Plasma physics and controlled nuclear fusion, Laser physics, Modern aspects of solid state matter physics and Charged particle accelerators. The Conference provided participants an opportunity to present their research results for the consideration of a wide audience from the sidelines of science. The main topics of the Conference were: • Controlled nuclear fusion with magnetic and inertial confinement; • Low-temperature plasma and its application in modern technology; • Laser physics and technologies for industry, environmental control and precise measurements; • Optical information control, holography, spintronics and photonics; • Modern aspects of solid state matter physics and nanophysics; • Charged particle accelerators. More than 200 specialists on plasma, laser and solid state physics took part in the II Conference. They represented leading Russian scientific research centres and universities (such as Troitsk Institute of Innovative and Thermonuclear Research, Institute of Crystallography, National Research Centre 'Kurchatov Institute', Institute of Physical Chemistry and Electrochemistry and others) and universities from Belarus, Ukraine, Germany, USA, Canada, Belgium, and Sweden. All report presentations were broadcasted online on the NRNU MEPhI official site. The translation was watched by viewers from Moscow, Prague, St. Petersburgh and other cities, who could not attend the Conference. We would like to thank heartily all of the speakers, participants and organizing committee members for their contribution to the conference. (paper)

  18. 1st International Conference on Communities and Technologies

    CERN Document Server

    Wenger, Etienne; Wulf, Volker

    2003-01-01

    The book contains 24 research articles related to the emerging research field of Communities and Technologies (C&T). The papers treat subjects such as online communities, communities of practice, Community support systems, Digital Cities, regional communities and the internet, knowledge sharing and communities, civil communities, communities and education and social capital. As a result of a very quality-oriented review process, the work reflects the best of current research and practice in the field of C&T.

  19. Development of nuclear technology through International Technical Cooperation programme: Malaysian experience

    International Nuclear Information System (INIS)

    Ainul Hayati Daud

    1997-01-01

    In the advent of new technologies and knowledge, countries need to rely on one another for progress and development. At the same time, new challenges to development, which are beyond the competence of any country to approach individually, have emerged. These have led to greater need for international co-operation, particularly among the developing countries. In Malaysia, international technical co-operation has contributed significantly towards the development of nuclear technology. Malaysia has received technical assistance through the multilateral, regional and bilateral co-operation. This assistance complements the efforts of the government to meet the primary objectives of science and technology programme, which are; intensification of R and D capacity and applications of technologies, both acquired and developed, in national development. Over the last one and a half decade, more than 70 projects valued almost USD 15 millions, were implemented under the Technical Assistance Programme of the International Atomic Energy Agency and the Bilateral Technical Assistance Programme of Japan and Australia. Malaysia also has benefited from the regional technical co-operation programme such Regional Co-operative Agreement for Asia and Pacific Region, United Nation Department Programme, International Nuclear Co-operation in Asia. While receiving assistance, Malaysia continues to assist other developing countries in their development efforts in the fields of nuclear technology, through the various international co-operation programmes. This report reviews the technical assistance received through the international co-operation and its contributions towards the development of nuclear technology in Malaysia for period 1980 - 1996

  20. Mechanisms for International Low-Carbon Technology Cooperation. Roles and Impacts

    Energy Technology Data Exchange (ETDEWEB)

    Bazilian, M. [United Nations Industrial Development Organization UNIDO, Vienna (Austria); De Coninck, H.C. [ECN Policy Studies, Petten (Netherlands); Cosbey, A. [International Institute for Sustainable Development IISD, Winnipeg (Canada); Neuhoff, K. [EPRG, University of Cambridge, Cambridge (United Kingdom)

    2009-08-15

    International technology cooperation under the UNFCCC aims to provide the basis for large-scale and efficient mitigation action in developing countries. This paper characterises technology and enabling environment needs in developing countries and connects them to possible international mechanisms in order to arrive at appropriate and efficient international technology cooperation. This allows for a structured discussion of mechanisms for technology cooperation, and for a connection with nationally-focused technology mechanisms under discussion, such as low-carbon development strategies (LCDSs), Technology Needs Assessments (TNAs), technology action plans (TAPs), and nationally appropriate mitigation actions (NAMAs). Technology innovation is the process of technology development from its discovery or adoption to its wide-spread commercial use. Its success is dependent on many actors and on institutions that facilitate their effective interactions. The core reasons why domestic mitigation action does not occur in developing countries can often be found in the lack of this enabling environment. IPCC, IIASA, UNFCCC define 'enabling environment' as encompassing all the dimensions that are required to foster the uptake of a product or service. This includes well-trained operators and users, appropriate regulatory and institutional frameworks, markets, and robust physical infrastructure and maintenance capabilities. The challenge for the UNFCCC is the formulation of frameworks that connect domestic action with international mechanisms. Through NAMAs, developing countries would define domestic policies and actions required to create a conducive environment for the deployment of low-carbon technologies. These actions could be assisted, on demand, by international support mechanisms that enable technology cooperation, capacity building, strengthening of domestic institutions and financial transfers. To facilitate effective implementation, this paper suggests that

  1. An Analysis of Asia-Pacific Educational Technology Research Published Internationally in 2000-2013

    Science.gov (United States)

    Jung, Insung; Yoo, Mina

    2014-01-01

    The past fourteen years have seen a significant rise in the percentage of Asia-Pacific papers on educational technology (ET) published internationally: from 13.7% in 2000 to 38.4% in 2013. This study seeks to identify the overall trends and gaps in this research. Of the 4,332 articles published in five selected international journals between 2000…

  2. Technology Experiences of Student Interns in a One to One Mobile Program

    Science.gov (United States)

    Cullen, Theresa A.; Karademir, Tugra

    2018-01-01

    This article describes how a group of student intern teachers (n = 51) in a one to one teacher education iPad program were asked to reflect using Experience Sampling Method (ESM) on their use of technology in the classroom during internship. Interns also completed summative reflections and class discussions. Data collected both in online and…

  3. International legal framework for geoengineering: Managing the risks of an emerging technology

    NARCIS (Netherlands)

    Du, Haomiao

    2016-01-01

    The present book “International Legal Framework for Geoengineering – Managing the Risks of an Emerging Technology” is about international law and an emerging technology called geoengineering, which refers to the large-scale manipulation of the planetary environment for counteracting anthropogenic

  4. Deep Learning: Enriching Teacher Training through Mobile Technology and International Collaboration

    Science.gov (United States)

    Naylor, Amanda; Gibbs, Janet

    2018-01-01

    This article presents results from an international collaboration between college students and pre-service teachers in Norway and the UK. This research is part of a large, international project exploring and developing the interrelationship between mobile technology and teachers' perceptions of teaching and learning. Data was collected for this…

  5. Proceedings: international conference on transfer of forest science knowledge and technology.

    Science.gov (United States)

    Cynthia Miner; Ruth Jacobs; Dennis Dykstra; Becky Bittner

    2007-01-01

    This proceedings compiles papers presented by extensionists, natural resource specialists, scientists, technology transfer specialists, and others at an international conference that examined knowledge and technology transfer theories, methods, and case studies. Theory topics included adult education, applied science, extension, diffusion of innovations, social...

  6. 5th International Conference on Advancements of Medicine and Health Care through Technology

    CERN Document Server

    Roman, Nicolae

    2017-01-01

    This volume presents the contributions of the fifth International Conference on Advancements of Medicine and Health Care through Technology (Meditech 2016), held in in Cluj-Napoka, Romania. The papers of this Proceedings volume present new developments in - Health Care Technology, - Medical Devices, Measurement and Instrumentation, - Medical Imaging, Image and Signal Processing, - Modeling and Simulation, - Molecular Bioengineering, - Biomechanics.

  7. Software Technologies - 8th International Joint Conference, ICSOFT 2013 : Revised Selected Papers

    NARCIS (Netherlands)

    Cordeiro, José; van Sinderen, Marten J.

    2014-01-01

    The present book includes extended and revised versions of a set of selected papers from the 8th International Joint Conference on Software Technologies (ICSOFT 2013), which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information,

  8. Social Network Analysis of 50 Years of International Collaboration in the Research of Educational Technology

    Science.gov (United States)

    Guo, Shesen; Zhang, Ganzhou; Guo, Yufei

    2016-01-01

    The definition of the field of educational technology has evolved over 50 years. New inventions and economic globalization increasingly facilitate people's communication for exchange of ideas and collaboration. This work attempts to describe international research collaboration in educational technology for the past 50 years. This article intends…

  9. International Conference on Advancements of Medicine and Health Care through Technology

    CERN Document Server

    Ciupa, Radu

    2014-01-01

    This volume presents the contributions of the third International Conference on Advancements of Medicine and Health Care through Technology (Meditech 2014), held in Cluj-Napoka, Romania. The papers of this Proceedings volume present new developments in - Health Care Technology, - Medical Devices, Measurement and Instrumentation, - Medical Imaging, Image and Signal Processing, - Modeling and Simulation, - Molecular Bioengineering, - Biomechanics.

  10. Meeting International Society for Technology in Education Competencies with a Problem-Based Learning Video Framework

    Science.gov (United States)

    Skoretz, Yvonne M.; Cottle, Amy E.

    2011-01-01

    Meeting International Society for Technology in Education competencies creates a challenge for teachers. The authors provide a problem-based video framework that guides teachers in enhancing 21st century skills to meet those competencies. To keep the focus on the content, the authors suggest teaching the technology skills only at the point the…

  11. Use of Mobile Technology for Monitoring and Evaluation in International Health and Development Programs

    Science.gov (United States)

    Bruce, Kerry

    2013-01-01

    Background: Mobile phones and other technologies are widely used in health programming in developing countries, many introduced by international nongovernmental organizations (INGOs) to accelerate data collection. This research examined: How are INGOs adopting the innovation of mobile technology into M&E systems for health care programs in…

  12. 25 CFR 543.16 - What are the minimum internal controls for information technology?

    Science.gov (United States)

    2010-04-01

    ... controls for information technology? (a) Physical security measures restricting access to agents, including... longer required. (2) In the event of remote access, the information technology employees must prepare a... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal controls for information...

  13. 2nd International Conference on Emerging Trends in Electrical, Communication and Information Technologies

    CERN Document Server

    Kumar, Amit; Sankar, V; Rao, N; Sarma, T

    2017-01-01

    This book includes the original, peer-reviewed research from the 2nd International Conference on Emerging Trends in Electrical, Communication and Information Technologies (ICECIT 2015), held in December, 2015 at Srinivasa Ramanujan Institute of Technology, Ananthapuramu, Andhra Pradesh, India. It covers the latest research trends or developments in areas of Electrical Engineering, Electronic and Communication Engineering, and Computer Science and Information.

  14. 9th FTRA International Conference on Future Information Technology

    CERN Document Server

    Pan, Yi; Kim, Cheon-Shik; Yang, Yun

    2014-01-01

    The new multimedia standards (for example, MPEG-21) facilitate the seamless integration of multiple modalities into interoperable multimedia frameworks, transforming the way people work and interact with multimedia data. These key technologies and multimedia solutions interact and collaborate with each other in increasingly effective ways, contributing to the multimedia revolution and having a significant impact across a wide spectrum of consumer, business, healthcare, education, and governmental domains.  This book aims to provide a complete coverage of the areas outlined and to bring together the researchers from academic and industry as well as practitioners to share ideas, challenges, and solutions relating to the multifaceted aspects of this field.

  15. Enterprise Systems and Technology, Proceedings of the 2nd International Workshop on Enterprise Systems and Technology - I-WEST 2008

    NARCIS (Netherlands)

    Cordeiro, J.; van Sinderen, Marten J.; Shishkov, Boris

    This volume contains the proceedings of the Second International Workshop on Enterprise Systems and Technology (I-WEST 2008), held on May 23 in Enschede, The Netherlands. The I-WEST workshop is a scientific event of IICREST, the Interdisciplinary Institute for Collaboration and Research on

  16. International Conference on Emerging Research in Electronics, Computer Science and Technology

    CERN Document Server

    Sheshadri, Holalu; Padma, M

    2014-01-01

    PES College of Engineering is organizing an International Conference on Emerging Research in Electronics, Computer Science and Technology (ICERECT-12) in Mandya and merging the event with Golden Jubilee of the Institute. The Proceedings of the Conference presents high quality, peer reviewed articles from the field of Electronics, Computer Science and Technology. The book is a compilation of research papers from the cutting-edge technologies and it is targeted towards the scientific community actively involved in research activities.

  17. Cooperating internationally. US/Japan Civil Industrial Technologies (CIT) Arrangement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    The Civil Industrial Technologies (CIT) Arrangement was signed in July 1994 between governments of the US and Japan. Areas of research range from scientific and technical databases and bioprocessing to precompetitive processing of functionally-gradient materials and ceramics. Papers presented in this symposium include studies on thin polymer films generated by vapor deposition polymerization, development of manufacturing technique of fusing 3D C/C composite materials, measurement and analysis for high performance computing systems, low-cost fabrication of ceramic components, bioprocessing, data exchange for mass spectral databases, development of high performance aluminum nitride ceramics, precompetitive processing of functionally-gradient materials, purity determination of organic reference materials, definitive methods traceable to SI unit, development of biocompatible artificial hard tissue materials, development of photoassisted catalysis technologies, surface analysis for catalysts by electron spectroscopy, development of ultra-solid lubricant with cluster diamond, precise determination of impurities in high-purity rare-earth metals, and highly accurate acceleration measurement system. 22 refs., 86 figs., 3 tabs.

  18. International technology transfer to support the environmental restoration needs of the DOE complex

    International Nuclear Information System (INIS)

    DuCharme, A.R.; Jimenez, R.D.; Roberds, W.J.

    1992-01-01

    One of the principal objectives of the International Technology Exchange Program (ITEP) is the exchange of waste management and environmental restoration (WM/ER) technologies between the US and other nations. The current emphasis of ITEP is the transfer of technologies to the US that could provide better, faster, cheaper, or safer solutions to the needs of the DOE complex. The 10 candidate technologies that have been identified thus far by ITEP are discussed. The highlights of preliminary evaluations of these technologies through a systems approach are also described. The technologies have been evaluated by a screening process to determine their applicability to the leading WM/ER needs of the DOE complex. The technologies have been qualitatively compared with the known or anticipated capabilities of domestic, base case technologies

  19. International cooperation for science and technology development: a way forward for equity in health.

    Science.gov (United States)

    Andrade, Priscila Almeida; Carvalho, Denise Bomtempo Birche de

    2015-01-01

    Since 1990, international organizations have been increasingly involved in building an international sub-regime for research, development and innovation in health. This article analyzes the priorities of developing countries in health since the 1990s. It is a descriptive and analytical study that investigates the literature and contributions of key informants. Calling for the end of global inequities in the support for science and technology in health, international organizations recommend that developing countries focus their efforts on neglected diseases and operational research, an insufficient agenda for science and technology cooperation to effectively overcome the vulnerabilities between countries.

  20. Improving internal communication between marketing and technology functions for successful new food product development

    DEFF Research Database (Denmark)

    Jacobsen, Lina; Grunert, Klaus G; Søndergaard, Helle Alsted

    2014-01-01

    and technology experts within the NPD process from a food industry point of view. The review provides practical implications for improving internal communication in food companies and identifies knowledge gaps. By focusing on optimising organisational structure, team composition, management support......, and knowledge management, food companies can enhance internal communication between market and technology functions during the NPD process.......In order to increase the new product development (NPD) success for novel food products, it is crucial to understand how information can be optimally disseminated within companies. This systematic literature review concentrates on factors influencing internal communication between market...

  1. What Drives the International Transfer of Climate Change Mitigation Technologies? Empirical Evidence from Patent Data

    International Nuclear Information System (INIS)

    Dechezleprete, A.; Glachant, M.; Meniere, Y.

    2010-01-01

    Using patent data from 66 countries for the period 1990-2003, we characterize the factors which promote or hinder the international diffusion of climate-friendly technologies on a global scale. Regression results show that technology-specific capabilities of the recipient countries are determinant factors. In contrast, the general level of education is less important. We also show that restrictions to international trade - e.g., high tariff rates - and to a lesser extent lax intellectual property regimes negatively influence the international diffusion of patented knowledge. A counter-intuitive result is that barriers to foreign direct investments can promote transfers. We discuss different possible interpretations. (authors)

  2. Performance planning and measurement for DOE EM-International Technology Integration Program. A report on a performance measurement development workshop for DOE's environmental management international technology integration program

    International Nuclear Information System (INIS)

    Jordan, G.B.; Reed, J.H.; Wyler, L.D.

    1997-03-01

    This report describes the process and results from an effort to develop metrics for program accomplishments for the FY 1997 budget submission of the U.S. Department of Energy Environmental Management International Technology Integration Program (EM-ITI). The four-step process included interviews with key EM-ITI staff, the development of a strawman program logic chart, and all day facilitated workshop with EM-ITI staff during which preliminary performance plans and measures were developed and refined, and a series of follow-on discussions and activities including a cross-organizational project data base. The effort helped EM-ITI to crystallize and develop a unified vision of their future which they can effectively communicate to their own management and their internal and external customers. The effort sets the stage for responding to the Government Performance and Results Act. The metrics developed may be applicable to other international technology integration programs. Metrics were chosen in areas of eight general performance goals for 1997-1998: (1) number of forums provided for the exchange of information, (2) formal agreements signed, (3) new partners identified, (4) customers reached and satisfied, (5, 6) dollars leveraged by EM technology focus area and from foreign research, (7) number of foreign technologies identified for potential use in remediation of DOE sites, and (8) projects advanced through the pipeline

  3. International Conference on Soft Computing in Information Communication Technology

    CERN Document Server

    Soft Computing in Information Communication Technology

    2012-01-01

      This is a collection of the accepted papers concerning soft computing in information communication technology. All accepted papers are subjected to strict peer-reviewing by 2 expert referees. The resultant dissemination of the latest research results, and the exchanges of views concerning the future research directions to be taken in this field makes the work of immense value to all those having an interest in the topics covered. The present book represents a cooperative effort to seek out the best strategies for effecting improvements in the quality and the reliability of Neural Networks, Swarm Intelligence, Evolutionary Computing, Image Processing Internet Security, Data Security, Data Mining, Network Security and Protection of data and Cyber laws. Our sincere appreciation and thanks go to these authors for their contributions to this conference. I hope you can gain lots of useful information from the book.

  4. 8th KES International Conference on Intelligent Decision Technologies

    CERN Document Server

    Caballero, Alfonso; Howlett, Robert; Jain, Lakhmi

    2016-01-01

    The KES-IDT-2016 proceedings give an excellent insight into recent research, both theoretical and applied, in the field of intelligent decision making. The range of topics explored is wide, and covers methods of grouping, classification, prediction, decision support, modelling and many more in such areas as finance, linguistics, medicine, management and transportation. This proceedings contain several sections devoted to specific topics, such as: · Specialized Decision Techniques for Data Mining, Transportation and Project Management · Pattern Recognition for Decision Making Systems · New Advances of Soft Computing in Industrial and Management Engineering · Recent Advances in Fuzzy Systems · Intelligent Data Analysis and Applications · Reasoning-based Intelligent Systems · Intelligent Methods for Eye Movement Data Processing and Analysis · Intelligent Decision Technologies for Water Resources Management · Intelligent Decision Making for Uncertain Unstructured Big Data · Decision Making Theory for Ec...

  5. International Conference on Magnet Technology, 7th, MT-7, 1981

    International Nuclear Information System (INIS)

    Komarek, P.; Maurer, W.; Seibt, E.W.

    1981-01-01

    Proceedings includes 191 papers dealing with a wide variety of magnet and supermagnet technology and materials. Topics considered include: nuclear reactors, high-energy physics, accelerators, conductors, solenoids, fusion magnets, irradiation effects, cryogenics, hybrid magnets, quench problems, energy storage, pulsed magnets, superconducting machines, test and laboratory magnets, losses, stability, field measurements, magnetic shielding, MHD, rotating machines, test facilities, research laboratories, structural materials, magnets for medical applications, biological effects, tokamak devices, particle spectrometers, superconducting cables and coils, magnetic levitation, plasmas, cryostats, magnetic separation, magnetic measurements and measuring instruments, and various alloys used for superconducting materials, particularly those containing niobium, tin, copper and titanium. All papers are abstracted separately. Technical and professional papers from this conference are indexed with the conference code no. 00687 in the Ei Engineering Meetings (TM) database produced by Engineering Information, Inc

  6. REPORT ON THE INTERNATIONAL CENTRE FOR GAS TECHNOLOGY INFORMATION'S 2002 ACCOMPLISHMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Mary Lang

    2003-03-01

    This is the final technical report for the U.S. Department of Energy Grant DE-FG26-02NT41445 for Membership in the International Centre for Gas Technology Information. The grant period began January 1, 2002 and ended December 31, 2002. The primary purpose of this grant was to continue U.S. country membership in the International Energy Agency's International Centre for Gas Technology Information (ICGTI) for calendar year 2002. The mission of ICGTI is to promote international cooperation and collaboration on natural gas technology development and commercialization. This final technical report describes ICGTI's 2002 activities, in which U.S. country membership in ICGTI was sustained and supported, but ICGTI's activities were curtailed by loss of funding.

  7. 11th International Conference on Multimedia and Ubiquitous Engineering & 12th International Conference on Future Information Technology

    CERN Document Server

    Chen, Shu-Ching; Choo, Kim-Kwang

    2017-01-01

    This book presents the proceedings of the 11th International Conference on Multimedia and Ubiquitous Engineering (MUE2017) and the 12th International Conference on Future Information Technology (FutureTech2017), held in Seoul, South Korea on May 22–24, 2017. These two conferences provided an opportunity for academic and industrial professionals to discuss recent advances in the area of multimedia and ubiquitous environments including models and systems, new directions, and novel applications associated with the utilization and acceptance of ubiquitous computing devices and systems. The resulting papers address the latest technological innovations in the fields of digital convergence, multimedia convergence, intelligent applications, embedded systems, mobile and wireless communications, bio-inspired computing, grid and cloud computing, semantic web, user experience, HCI, and security and trust computing. The book offers a valuable resource for a broad readership, including students, academic researchers, and...

  8. INTERNAL COMMUNICATION, THE PROGRESS OF TECHNOLOGY AND SUSTAINABLE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    CRISTINA ANDREI

    2014-05-01

    Full Text Available Sustainable development involves the broad public participation including the national, regional and local authorities, business and industry, civil society, all major groups – women, children and youth, all workers, trade unions and families. Not only organizations but also employees have a role to play in applying sustainable development in their jobs because their decisions taken every day have an environmental impact. Communication within organization is used as a means to coordinate information exchange and to establish effective coordination of activities between the members of organization. Internet, e-mail, mobile phones, satellite and wireless have had an effect on the way in which information is exchanged and on how people communicate not only in their day-to-day life but also within in the organizations they belong to. New communication technologies have increased the possibilities for a better access to information for employees and made possible to have their voices heard from their colleagues to superior levels, offering the possibility of a two-way communication and creating the potential for greater understanding and dialogue between them. Besides increasing profits, saving time and costs, the use of e-communication within organizations, offer the convenience of combating environmental damage through cutting back on paper and ink usage

  9. Proceedings of the 2012 International Conference on Information Technology and Software Engineering : Software Engineering & Digital Media Technology

    CERN Document Server

    Cai, Guoqiang; Liu, Weibin; Xing, Weiwei

    2013-01-01

    Proceedings of the 2012 International Conference on Information Technology and Software Engineering presents selected articles from this major event, which was held in Beijing, December 8-10, 2012. This book presents the latest research trends, methods and experimental results in the fields of information technology and software engineering, covering various state-of-the-art research theories and approaches. The subjects range from intelligent computing to information processing, software engineering, Web, unified modeling language (UML), multimedia, communication technologies, system identification, graphics and visualizing, etc. The proceedings provide a major interdisciplinary forum for researchers and engineers to present the most innovative studies and advances, which can serve as an excellent reference work for researchers and graduate students working on information technology and software engineering. Prof. Wei Lu, Dr. Guoqiang Cai, Prof. Weibin Liu and Dr. Weiwei Xing all work at Beijing Jiaotong Uni...

  10. Proceedings of the international conference on advances in computer and communication technology

    International Nuclear Information System (INIS)

    Bakal, J.W.; Kunte, A.S.; Walinjkar, P.B.; Karnani, N.K.

    2012-02-01

    A nation's development is coupled with advancement and adoption of new technologies. During the past decade advancements in computer and communication technologies have grown multi fold. For the growth of any country it is necessary to keep pace with the latest innovations in technology. International Conference on Advances in Computer and Communication Technology organised by Institution of Electronics and Telecommunication Engineers, Mumbai Centre is an attempt to provide a platform for scientists, engineering students, educators and experts to share their knowledge and discuss the efforts put by them in the field of R and D. The papers relevant to INIS are indexed separately

  11. Influence of Technological Assets on Organizational Performance through Absorptive Capacity, Organizational Innovation and Internal Labour Flexibility

    Directory of Open Access Journals (Sweden)

    Encarnación García-Sánchez

    2018-03-01

    Full Text Available Organizational innovation is increasingly mandatory for firms to overcome their competitors. Organizational innovation is especially relevant in today’s dynamic and turbulent environments, where other internal variables—such as technological assets, employee training, coordination of new management capabilities, and new flexible human resources and more adaptable organizational designs—must be encouraged to create value and competitive advantage. The purpose of our research is to analyse whether technological assets influence absorptive capacity (potential and realized absorptive capacity and how absorptive capacity influences internal labour flexibility, organizational innovation and performance. We achieve these goals by analysing the interrelations among internal labour flexibility, organizational innovation and performance, using the theory of resources and capabilities. A quantitative study was carried out with data gathered by personal interview using a structured questionnaire. Relationships proposed in the theoretical model were estimated through a structural equation model, using a sample of 160 European technology companies. The results show that support for technology and improvement of technological skills and technological distinctive competencies promote improvement in organizational performance through their positive influence on the processes of potential and realized absorption capacity. Potential absorptive capacity influences realized absorptive capacity, which impacts not only internal labour flexibility but also organizational innovation and organizational performance. Further, internal labour flexibility influences organizational performance through organizational innovation. This issue is of particular interest when considering the dynamic nature of turbulent technological environments in which the organization operates. Technological assets thus identify new sources of flexibility and organizational innovation based

  12. International technology catalogue: Foreign technologies to support the environmental restoration and waste management needs of the DOE complex

    International Nuclear Information System (INIS)

    Matalucci, R.V.

    1995-07-01

    This document represents a summary of 27 foreign-based environmental restoration and waste management technologies that have been screened and technically evaluated for application to the cleanup problems of the Department of Energy (DOE) nuclear weapons complex. The evaluation of these technologies was initiated in 1992 and completed in 1995 under the DOE's International Technology Coordination Program of the Office of Technology Development. A methodology was developed for conducting a country-by-country survey of several regions of the world where specific environmental technology capabilities and market potential were investigated. The countries that were selected from a rank-ordering process for the survey included: then West Germany, the Netherlands, France, Japan, Taiwan, the Czech and Slovak Republics, and the Former Soviet Union. The notably innovative foreign technologies included in this document were screened initially from a list of several hundred, and then evaluated based on criteria that examined for level of maturity, suitability to the DOE needs, and for potential cost effective application at a DOE site. Each of the selected foreign technologies that were evaluated in this effort for DOE application were subsequently matched with site-specific environmental problem units across the DOE complex using the Technology Needs Assessment CROSSWALK Report. For ease of tracking these technologies to site problem units, and to facilitate their input into the DOE EnviroTRADE Information System, they were categorized into the following three areas: (1) characterization, monitoring and sensors, (2) waste treatment and separations, and (3) waste containment. Technical data profiles regarding these technologies include title and description, performance information, development status, key regulatory considerations, intellectual property rights, institute and contact personnel, and references

  13. International technology catalogue: Foreign technologies to support the environmental restoration and waste management needs of the DOE complex

    Energy Technology Data Exchange (ETDEWEB)

    Matalucci, R.V. [ed.] [Sandia National Labs., Albuquerque, NM (United States). International Programs Dept.; Jimenez, R.D.; Esparza-Baca, C. [ed.] [Applied Sciences Lab., Inc., Albuquerque, NM (United States)

    1995-07-01

    This document represents a summary of 27 foreign-based environmental restoration and waste management technologies that have been screened and technically evaluated for application to the cleanup problems of the Department of Energy (DOE) nuclear weapons complex. The evaluation of these technologies was initiated in 1992 and completed in 1995 under the DOE`s International Technology Coordination Program of the Office of Technology Development. A methodology was developed for conducting a country-by-country survey of several regions of the world where specific environmental technology capabilities and market potential were investigated. The countries that were selected from a rank-ordering process for the survey included: then West Germany, the Netherlands, France, Japan, Taiwan, the Czech and Slovak Republics, and the Former Soviet Union. The notably innovative foreign technologies included in this document were screened initially from a list of several hundred, and then evaluated based on criteria that examined for level of maturity, suitability to the DOE needs, and for potential cost effective application at a DOE site. Each of the selected foreign technologies that were evaluated in this effort for DOE application were subsequently matched with site-specific environmental problem units across the DOE complex using the Technology Needs Assessment CROSSWALK Report. For ease of tracking these technologies to site problem units, and to facilitate their input into the DOE EnviroTRADE Information System, they were categorized into the following three areas: (1) characterization, monitoring and sensors, (2) waste treatment and separations, and (3) waste containment. Technical data profiles regarding these technologies include title and description, performance information, development status, key regulatory considerations, intellectual property rights, institute and contact personnel, and references.

  14. A Study on intensifying efficiency for international collaborative development of Advanced Nuclear Energy Technology

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Moon Hee; Kim, H. R.; Kim, H. J.; Chang, J. H.; Hahn, D. H.; Bae, Y. Y.; Kim, W. W.; Jeong, I.; Lee, D. S.; Lee, J. H. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2008-06-15

    Generation IV International Forum(GIF), where 13 countries including Korea collaborate to develop future nuclear energy systems, put into force 'Generation IV International Forum Project Arrangement' in 2007 for the international research and development of Gen IV Systems, following the entry into force of Framework Agreement in 2005. The International Nuclear Research Initiative(I-NERI) between Korea and United States and the International Project on Innovative Nuclear Energy Systems and Fuel Cycles(INPRO) of IAEA are continued in this year, produced lots of visible outcomes. These international activities have a common goal of the collaborative development of advanced nuclear system technologies but differ in the main focusing areas and aspects, so Korea needs to establish the integrated strategy based on the distinguished and complementary approach for the participation of each international programs, as examples the GIF for the advanced system technology development, INPRO for the set-up of institution and infra-structure, and I-NERI for the access of the core technologies and acquisition of the transparency of nuclear R and D.

  15. International Association of Technological University Libraries (IATUL: Promoting Science and Technology Librarianship in the Changing Library Landscape International Association of Technological University Libraries (IATUL: Promoting Science and Technology Librarianship in the Changing Library Landscape

    Directory of Open Access Journals (Sweden)

    Maitrayee Ghosh

    2007-12-01

    Full Text Available International Association of Technological University Libraries (IATUL has been in the forefront of providing leadership to information professionals and promoting science and Technology librarianship in today's changing library landscape. The present article is an attempt to comprehend the present status of IATUL and analyze the activities and contribution it has made to overcome the range of challenges facing by tertiary level Technological libraries throughout the world. The SWOT analysis method is used to assess the achievements of IATUL, failures and ascertain constraints being faced in this internet age. The author relied on web sites as well as ephemeral material such as minutes, annual reports, newsletters, and memoranda to construct this article. Meeting and Interview with IATUL present and past presidents and other office bearers of the associations provided useful sources of information. It is also attempted to provide relevant information for those interested to join IATUL for professional development.

  16. Comparative analyses for selected clean coal technologies in the international marketplace

    Energy Technology Data Exchange (ETDEWEB)

    Szpunar, C.B.; Gillette, J.L.

    1990-07-01

    Clean coal technologies (CCTs) are being demonstrated in research and development programs under public and private sponsorship. Many of these technologies could be marketed internationally. To explore the scope of these international opportunities and to match particular technologies with markets appearing to have high potential, a study was undertaken that focused on seven representative countries: Italy, Japan, Morocco, Turkey, Pakistan, the Peoples' Republic of China, and Poland. The results suggest that there are international markets for CCTs and that these technologies can be cost competitive with more conventional alternatives. The identified markets include construction of new plants and refurbishment of existing ones, especially when decision makers want to decrease dependence on imported oil. This report describes potential international market niches for U.S. CCTs and discusses the status and implications of ongoing CCT demonstration activities. Twelve technologies were selected as representative of technologies under development for use in new or refurbished industrial or electric utility applications. Included are the following: Two generic precombustion technologies: two-stage froth-flotation coal beneficiation and coal-water mixtures (CWMs); Four combustion technologies: slagging combustors, integrated-gasification combined-cycle (IGCC) systems, atmospheric fluidized-bed combustors (AFBCs), and pressurized fluidized-bed combustors (PFBCs); and Six postcombustion technologies: limestone-injection multistage burner (LIMB) systems, gas-reburning sorbent-injection (GRSI) systems, dual-alkali flue-gas desulfurization (FGD), spray-dryer FGD, the NOXSO process, and selective catalytic reduction (SCR) systems. Major chapters of this report have been processed separately for inclusion on the data base.

  17. Evaluation of information technology impact on effective internal control in the University system

    International Nuclear Information System (INIS)

    Sanusi Fasilat, A.; Hassan, Haslinda

    2015-01-01

    Information Technology (IT) plays a key role in internal control system in various organizations in terms of maintaining records and other internal services. Internal control system is defined as an efficient control procedures set up by firm to safeguard resources and to assure the reliability and accuracy of both financial and non-financial records in line with applicable governance and procedure to acquire the established goal and objectives. This paper focuses on the impact of IT on internal control system in the Nigerian universities. Data are collected from three different universities via questionnaire. Descriptive statistics is used to analyze the data; Chi-square is performed to test the hypothesis. The results of the hypothesis showed that IT has a positive relationship with the effective internal control activities in the University system. It is concluded that the adoption of IT will significantly improve the effectiveness of the internal control system operations in the University in terms of quality service delivery

  18. Evaluation of information technology impact on effective internal control in the University system

    Energy Technology Data Exchange (ETDEWEB)

    Sanusi Fasilat, A., E-mail: Fasilat17@gmail.com; Hassan, Haslinda, E-mail: lynn@uum.edu.my [School of Accountancy, College of Business, Universiti Utara Malaysia, Sintok, Kedah (Malaysia)

    2015-12-11

    Information Technology (IT) plays a key role in internal control system in various organizations in terms of maintaining records and other internal services. Internal control system is defined as an efficient control procedures set up by firm to safeguard resources and to assure the reliability and accuracy of both financial and non-financial records in line with applicable governance and procedure to acquire the established goal and objectives. This paper focuses on the impact of IT on internal control system in the Nigerian universities. Data are collected from three different universities via questionnaire. Descriptive statistics is used to analyze the data; Chi-square is performed to test the hypothesis. The results of the hypothesis showed that IT has a positive relationship with the effective internal control activities in the University system. It is concluded that the adoption of IT will significantly improve the effectiveness of the internal control system operations in the University in terms of quality service delivery.

  19. The International Trade Policy for Technology Transfers: Legal and Economic Dilemmas on Multilateralism versus Bilateralism

    DEFF Research Database (Denmark)

    Tang, Yi Shin

    In the book, the Researcher addresses the importance of international technology transfers for economic development, as well as the underlying causes for the different institutional arrangements that promote such activity. The work provides a systematic interpretation of the wide range of interests...... among developed and developing countries, and how they affect the scope and content of international agreements dealing with technology transfers, especially given the anarchic structure of international trade relations. The research also finds that, contrary to the general view that bilateral trade...... agreements tend to undermine the effects of multilateral agreements, for the specific case of technology transfers these modalities seem to enjoy a mutually positive effect, and should thus be concurrently promoted...

  20. The developments of international hydrogen and fuel cell technology standards and the response strategies in Taiwan

    International Nuclear Information System (INIS)

    Tso, C.

    2009-01-01

    The application of hydrogen and fuel cells has expanded as the technology in international markets has improved. Leading countries have focused on establishing hydrogen and fuel cell technology standards. Both the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) continuously release new hydrogen and fuel cell related standards. Although the government of Taiwan is promoting the development of a hydrogen and fuel cell industry, it may delay the commercialized schedule if there are no hydrogen and fuel cell related standards and regulations in place. Standards and regulations must be established as quickly as possible in order to accelerate the progress of the hydrogen and fuel cell industry. This presentation reviewed the international progress in hydrogen and fuel cell development and explained Taiwan's response strategies regarding the adoption of hydrogen and fuel cell products in niche Taiwanese markets

  1. Innovation and international technology transfer: The case of the Chinese photovoltaic industry

    Energy Technology Data Exchange (ETDEWEB)

    De la Tour, A.; Glachant, M.; Meniere, Y.

    2010-07-01

    China is the largest solar photovoltaic cell producer in the world, with more than one third of worldwide production in 2008, exporting more than 95 percent of what it produces. The purpose of this paper is to understand the drivers of this success and its limits, with a particular emphasis on the role of technology transfers and innovation. Our analysis combines a review of international patent data at a detailed technology level with field interviews of ten Chinese PV companies. We show that Chinese producers have acquired the technologies and skills necessary to produce PV products through two main channels: the purchasing of manufacturing equipment in a competitive international market and the recruitment of skilled executives from the Chinese Diaspora who built pioneer PV firms. The success of these firms in their market is, however, not reflected in their performance in terms of innovation. Rather, patent data rather highlight a policy-driven effort to catch up in critical technological areas. (authors)

  2. Innovation and international technology transfer: The case of the Chinese photovoltaic industry

    Energy Technology Data Exchange (ETDEWEB)

    Tour, Arnaud de la; Glachant, Matthieu; Meniere, Yann [Cerna, Mines ParisTech, 60 Boulevard Saint Michel, 75006 Paris (France)

    2011-02-15

    China is the largest solar photovoltaic cell producer in the world, with more than one third of worldwide production in 2008, exporting more than 95 percent of what it produces. The purpose of this paper is to understand the drivers of this success and its limits, with a particular emphasis on the role of technology transfers and innovation. Our analysis combines a review of international patent data at a detailed technology level with field interviews of ten Chinese PV companies. We show that Chinese producers have acquired the technologies and skills necessary to produce PV products through two main channels: the purchasing of manufacturing equipment in a competitive international market and the recruitment of skilled executives from the Chinese diaspora who built pioneer PV firms. The success of these firms in their market is, however, not reflected in their performance in terms of innovation. Rather, patent data highlight a policy-driven effort to catch up in critical technological areas. (author)

  3. Innovation and international technology transfer: The case of the Chinese photovoltaic industry

    International Nuclear Information System (INIS)

    De la Tour, A.; Glachant, M.; Meniere, Y.

    2010-01-01

    China is the largest solar photovoltaic cell producer in the world, with more than one third of worldwide production in 2008, exporting more than 95 percent of what it produces. The purpose of this paper is to understand the drivers of this success and its limits, with a particular emphasis on the role of technology transfers and innovation. Our analysis combines a review of international patent data at a detailed technology level with field interviews of ten Chinese PV companies. We show that Chinese producers have acquired the technologies and skills necessary to produce PV products through two main channels: the purchasing of manufacturing equipment in a competitive international market and the recruitment of skilled executives from the Chinese Diaspora who built pioneer PV firms. The success of these firms in their market is, however, not reflected in their performance in terms of innovation. Rather, patent data rather highlight a policy-driven effort to catch up in critical technological areas. (authors)

  4. Third International Conference on Computational Science, Engineering and Information Technology (CCSEIT-2013), v.1

    CERN Document Server

    Kumar, Ashok; Annamalai, Annamalai

    2013-01-01

      This book is the proceedings of Third International Conference on Computational Science, Engineering and Information Technology (CCSEIT-2013) that was held in Konya, Turkey, on June 7-9. CCSEIT-2013 provided an excellent international forum for sharing knowledge and results in theory, methodology and applications of computational science, engineering and information technology. This book contains research results, projects, survey work and industrial experiences representing significant advances in the field. The different contributions collected in this book cover five main areas: algorithms, data structures and applications;  wireless and mobile networks; computer networks and communications; natural language processing and information theory; cryptography and information security.  

  5. On-line internal corrosion monitoring and data management for remote pipelines: a technology update

    Energy Technology Data Exchange (ETDEWEB)

    Wold, Kjell; Stoen, Roar; Jenssen, Hallgeir [Roxar Flow Measurement AS, Stavanger (Norway); Carvalho, Anna Maria [Roxar do Brasil Ltda., Rio de Janeiro, RJ (Brazil)

    2009-07-01

    Internal corrosion monitoring of remote pipelines can be costly and demanding on resources. Online and non-intrusive monitoring directly on the pipe wall can improve the quality of measurements, make installation more convenient and allow more efficient communication of data. The purpose of this paper is to describe a non-intrusive technology, and show examples on field installations of the system. Furthermore, the non-intrusive technology data can be stored, interpreted and combined with conventional (intrusive) system information, in order to get a full picture of internal corrosion profile, corrosion rate and trends regarding the pipeline being monitored. (author)

  6. Proceedings of international Bhurban conference on applied sciences and technology v. 2

    International Nuclear Information System (INIS)

    Hoorani, H.R.; Munir, A.; Samar, R.; Kayani, J.K.; Khan, M.A.

    2005-01-01

    The 3rd international conference on international Bhurban conference on applied sciences and technology was held from 07-12 June, 2004 at Islamabad, Pakistan. The proceedings of of this conference has been published in two volumes and presented part of this seminar is volume 2. The papers in this volume deals with control and simulation, computational fluid dynamics. This conference was organised by the National Centre for Physics with a view to provide an opportunity for local scientist and engineers for learning and sharing of latest developments in various branches of science and emerging technologies which are important for the scientific development of Pakistan. (A.B.)

  7. Improving internal communication between marketing and technology functions for successful new food product development

    OpenAIRE

    Jacobsen, L.F.; Grunert, K.G.; Søndergaard, H.A.; Steenbekkers, B.; Dekker, M.; Lähteenmäki, L.

    2014-01-01

    In order to increase the new product development (NPD) success for novel food products, it is crucial to understand how information can be optimally disseminated within companies. This systematic literature review concentrates on factors influencing internal communication between market and technology experts within the NPD process from a food industry point of view. The review provides practical implications for improving internal communication in food companies and identifies knowledge gaps...

  8. International Conference on Emerging Technologies for Information Systems, Computing, and Management

    CERN Document Server

    Ma, Tinghuai; Emerging Technologies for Information Systems, Computing, and Management

    2013-01-01

    This book aims to examine innovation in the fields of information technology, software engineering, industrial engineering, management engineering. Topics covered in this publication include; Information System Security, Privacy, Quality Assurance, High-Performance Computing and Information System Management and Integration. The book presents papers from The Second International Conference for Emerging Technologies Information Systems, Computing, and Management (ICM2012) which was held on December 1 to 2, 2012 in Hangzhou, China.

  9. Update on Monitoring Technologies for International Safeguards and Fissile Material Verification

    International Nuclear Information System (INIS)

    Croessmann, C. Dennis; Glidewell, Don D.; Mangan, Dennis L.; Smathers, Douglas C.

    1999-01-01

    Monitoring technologies are playing an increasingly important part in international safeguards and fissile material verification. The developments reduce the time an inspector must spend at a site while assuring continuity of knowledge. Monitoring technologies' continued development has produced new seal systems and integrated video surveillance advances under consideration for Trilateral Initiative use. This paper will present recent developments for monitoring systems at Embalse, Argentina, VNHEF, Sarov, Russian, and Savannah River Site, Aiken, South Carolina

  10. International Association of Technological University Libraries (IATUL: Promoting Science and Technology Librarianship in the Changing Library Landscape

    Directory of Open Access Journals (Sweden)

    Maitrayee Ghosh

    2013-11-01

    Full Text Available International Association of Technological University Libraries (IATUL has been in the forefront of providing leadership to information professionals and promoting science and Technology librarianship in today's changing library landscape. The present article is an attempt to comprehend the present status of IATUL and analyze the activities and contribution it has made to overcome the range of challenges facing by tertiary level Technological libraries throughout the world. The SWOT analysis method is used to assess the achievements of IATUL, failures and ascertain constraints being faced in this internet age. The author relied on web sites as well as ephemeral material such as minutes, annu- al reports, newsletters, and memoranda to construct this article. Meeting and Interview with IATUL present and past presidents and other office bearers of the associations provided useful sources of information. It is also attempted to pro- vide relevant information for those interested to join IATUL for professional development.

  11. 2013 International Conference on Electrical and Information Technologies for Rail Transportation

    CERN Document Server

    Liu, Zhigang; Qin, Yong; Zhao, Minghua; Diao, Lijun

    2014-01-01

    Proceedings of the 2013 International Conference on Electrical and Information Technologies for Rail Transportation (EITRT2013) collects the latest research in this field, including a wealth of state-of-the-art research theories and applications in intelligent computing, information processing, communication technology, automatic control, etc. The objective of the proceedings is to provide a major interdisciplinary forum for researchers, engineers, academics and industrial professionals to present the most innovative research on and developments in the field of rail transportation electrical and information technologies. Contributing authors from academia, industry and the government also offer inside views of new, interdisciplinary solutions.

  12. Proceedings of the international conference on science, technology and applications of rare earths

    International Nuclear Information System (INIS)

    2015-01-01

    Rare Earth Elements (REEs) are extensively used in clean energy applications like wind turbines, hybrid car batteries/electric motors, solar energy collectors, permanent magnets, phosphors, multifunctional pigments, thin film technologies, defence - related systems, etc. The use of rare earth elements in modern technology has increased several folds over the past few years in both domestic and international sectors due to the growing economy. The current global demand for rare earths is expected to provide a myriad of business opportunities for rare earth industries across the world including India for the utilization of rare earths in green energy, technology and industry. Papers relevant to INIS are indexed separately

  13. Club Ademe International. Technologies and services of French eco-companies. Export catalogue 2017-2018

    International Nuclear Information System (INIS)

    2017-11-01

    Founded in 1997 at the initiative of ADEME and sponsored by the French government ministries for Ecology, Industry and Foreign Trade, Club ADEME International brings together over one hundred innovative French companies that are present in the world sustainable development market. Piloted by ADEME, this network of environmental business accompanies its members as they develop innovative international projects and partnerships dedicated to protecting the environment and mastering energy consumption. Club ADEME International, in liaison with ADEME and public bodies, offers many practical services business intelligence and information products, support for innovation-that members develop their international activity. This Club ADEME International catalogue presents an overview of technologies and services proposed by French eco-enterprises, essential components of global action to meet today's environmental, energy and climate challenges

  14. Club Ademe International. Technologies and services of French eco-companies. Export catalogue 2015-2016

    International Nuclear Information System (INIS)

    2015-01-01

    Founded in 1997 at the initiative of ADEME and sponsored by the French government ministries for Ecology, Industry and Foreign Trade, Club ADEME International brings together over one hundred innovative French companies that are present in the world sustainable development market. Piloted by ADEME, this network of environmental business accompanies its members as they develop innovative international projects and partnerships dedicated to protecting the environment and mastering energy consumption. Club ADEME International, in liaison with ADEME and public bodies, offers many practical services business intelligence and information products, support for innovation-that members develop their international activity. This Club ADEME International catalogue presents an overview of technologies and services proposed by French eco-enterprises, essential components of global action to meet today's environmental, energy and climate challenges

  15. Club Ademe International. Technologies and services of French eco-companies. Export catalogue 2016-2017

    International Nuclear Information System (INIS)

    2016-01-01

    Founded in 1997 at the initiative of ADEME and sponsored by the French government ministries for Ecology, Industry and Foreign Trade, Club ADEME International brings together over one hundred innovative French companies that are present in the world sustainable development market. Piloted by ADEME, this network of environmental business accompanies its members as they develop innovative international projects and partnerships dedicated to protecting the environment and mastering energy consumption. Club ADEME International, in liaison with ADEME and public bodies, offers many practical services business intelligence and information products, support for innovation-that members develop their international activity. This Club ADEME International catalogue presents an overview of technologies and services proposed by French eco-enterprises, essential components of global action to meet today's environmental, energy and climate challenges

  16. The Role of Technology Spillovers in the Process of Water Pollution Abatement for Large International Firms

    Directory of Open Access Journals (Sweden)

    Luigi Aldieri

    2017-05-01

    Full Text Available The objective of this paper is to analyze the effects of technology externalities stemming from different technological sectors for international firms engaged both in water pollution abatement and in dirty activities. We present a theoretical framework and an empirical analysis based upon a dataset composed of worldwide R&D-intensive firms. In order to identify the technological proximity between the firms, we construct an original Mahalanobis environmental industry weight matrix, based on the construction of technological vectors for each firm, with European ecological patents distributed across more technology classes. Opportune econometric techniques that deal with the firms’ unobserved heterogeneity and the weak exogeneity of the explanatory variables are implemented. The findings show significant spillover effects on the productivity and environmental performance of the firms.

  17. International Nuclear Technology Forum: Future prospects of nuclear power plants and Turkey

    International Nuclear Information System (INIS)

    1994-01-01

    The document includes 19 papers presented at the 'International Nuclear Technology Forum: Future Prospects of Nuclear Power Plants in Turkey', held between 12-15 October 1993 in Ankara (Turkey). A separate abstract was prepared for each paper prepared for each paper

  18. International symposium on radiation technology for conservation of the environment. Extended synopses

    International Nuclear Information System (INIS)

    1997-09-01

    This document includes extended synopses of 54 presentations given at the International Symposium on Radiation Technology for the conservation of the Environment held in Zakopane near Cracow), Poland, 8-12 September 1997. Each presentation is separately indexed. Refs, figs, tabs

  19. Information and Communication Technologies in International Education: A Canadian Policy Analysis

    Science.gov (United States)

    Aucoin, Robert C.

    2011-01-01

    The rhetoric surrounding the use of information and communication technologies (ICTs) in international education speaks of providing education access for all. However, an examination of actual policies reveals an emphasis not on creating an educated population, but on improving economic opportunities using discourses such as globalization,…

  20. An Investigation of Relationships between Internal and External Factors Affecting Technology Integration in Classrooms

    Science.gov (United States)

    Hur, Jung Won; Shannon, David; Wolf, Sara

    2016-01-01

    Various factors affecting technology integration have been identified, but little research has examined the relationships between factors, especially internal and external ones, and whether they directly or indirectly influenced each other. To fill this research gap, this study examined the significance and relationships of five factors…

  1. International career motives, repatriation and career success of Indian women in science & technology

    NARCIS (Netherlands)

    Valk, Reimira; van der Velde, E.G.; van Engen, Marloes; Godbole, R.

    2014-01-01

    Purpose The purpose of this paper is to gain insight into international career motives, repatriation and career success of Indian women in Science and Technology. Design/methodology/approach In total, 30 semi-structured interviews were conducted with (upper) middle-class Indian women in Science and

  2. The Contributions of Digital Communications Technology to Human Rights Education: A Case Study of Amnesty International

    Science.gov (United States)

    Norlander, Rebecca Joy

    2013-01-01

    This dissertation addresses the need for critical assessment and evaluation of human rights education (HRE) programs and activities, especially newer initiatives that incorporate the use of digital information and communications technology (ICT). It provides an in-depth case study of the use of digital ICT in Amnesty International's HRE efforts,…

  3. Internal Branding: Using Performance Technology To Create an Organization Focused on Customer Value.

    Science.gov (United States)

    Tosti, Donald T.; Stotz, Rodger

    2000-01-01

    Presents a performance technology approach to revenue enhancement, with the goal of improving customer retention through building customer value. Topics include internal branding, a way to make sure that what the company delivers matches what's promised in the advertising; product versus service brands; and customer satisfaction, including…

  4. Stakeholder identification of advanced technology opportunities at international ports of entry

    Energy Technology Data Exchange (ETDEWEB)

    Parker, S.K. [Sandia National Labs., Albuquerque, NM (United States). Energy Policy and Planning Dept.; Icerman, L. [Icerman and Associates, Santa Fe, NM (United States)

    1997-01-01

    As part of the Advanced Technologies for International and Intermodal Ports of Entry (ATIPE) Project, a diverse group of stakeholders was engaged to help identify problems experienced at inland international border crossings, particularly those at the US-Mexican border. The fundamental issue at international ports of entry is reducing transit time through the required documentation and inspection processes. Examples of other issues or problems, typically manifested as time delays at border crossings, repeatedly mentioned by stakeholders include: (1) lack of document standardization; (2) failure to standardize inspection processes; (3) inadequate information and communications systems; (4) manual fee and tariff collection; (5) inconsistency of processes and procedures; and (6) suboptimal cooperation among governmental agencies. Most of these issues can be addressed to some extent by the development of advanced technologies with the objective of allowing ports of entry to become more efficient while being more effective. Three categories of technologies were unambiguously of high priority to port of entry stakeholders: (1) automated documentation; (2) systems integration; and (3) vehicle and cargo tracking. Together, these technologies represent many of the technical components necessary for pre-clearance of freight approaching international ports of entry. Integration of vehicle and cargo tracking systems with port of entry information and communications systems, as well as existing industry legacy systems, should further enable border crossings to be accomplished consistently with optimal processing times.

  5. 25 October 2017 - Meeting on a South-East European International Institute for Sustainable Technologies

    CERN Multimedia

    Ordan, Julien Marius

    2017-01-01

    Meeting on a South-East European International Institute for Sustainable Technologies at CERN, organised by the Ministry of Science of Montenegro, followed by a lunch hosted by CERN Director-General F. Gianotti and a site visit to CMS counting room and S'Cool LAB.

  6. 3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications

    CERN Document Server

    Koziel, Slawomir; Kacprzyk, Janusz; Leifsson, Leifur; Ören, Tuncer

    2015-01-01

    This book includes extended and revised versions of a set of selected papers from the 3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2013) which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC). SIMULTECH 2013 was held in cooperation with the ACM SIGSIM - Special Interest Group (SIG) on SImulation and Modeling (SIM), Movimento Italiano Modellazione e Simulazione (MIMOS) and AIS Special Interest Group on Modeling and Simulation (AIS SIGMAS) and technically co-sponsored by the Society for Modeling & Simulation International (SCS), Liophant Simulation, Simulation Team and International Federation for Information Processing (IFIP). This proceedings brings together researchers, engineers, applied mathematicians and practitioners working in the advances and applications in the field of system simulation.

  7. Information and Communication Technologies in International Education: A Canadian Policy Analysi

    Directory of Open Access Journals (Sweden)

    Robert C. Aucoin

    2011-05-01

    Full Text Available The rhetoric surrounding the use of information and communication technologies (ICTs in international education speaks of providing education access for all. However, an examination of actual policies reveals an emphasis not on creating an educated population, but on improving economic opportunities using discourses such as globalization, knowledge economy, and knowledge society. This emphasis creates an imbalance in opportunities for using ICTs in education and presents challenges for international educators. This paper discusses the Canadian International Development Agency’s report, CIDA’s Strategy on Knowledge for Development through Information and Communication Technologies, as an example of how rhetoric does not always meet reality. The paper concludes with four simple recommendations for good ICT practice in developing contexts.

  8. PREFACE: International Scientific and Technical Conference ''Innovative Mechanical Engineering Technologies, Equipment and Materials-2014''

    Science.gov (United States)

    Nail, K.

    2015-06-01

    In the period from 3 to 5 December 2014 the city of Kazan hosted the International Scientific Conference ''Innovative mechanical engineering technologies, equipment and materials - 2014'' (ISC ''vIMETEM - 2014''). The event was followed by the 14th International specialized exhibition ''Engineering. Metalworking. Kazan'' The main objective of the annual conference was for participants to discuss scientific and technical achievements in the design and manufacture of engineering products, the expansion of cooperation between scientific organizations and enterprises of machine-building complex and the definition of perspective ways of creation and development of new techniques, technologies and materials. The conference ''IMETEM'' was devoted to the 90th anniversary of Fayzrahman Salahovich Yunusov, who made a great contribution in the field of aviation technology. Kashapov Nail, D.Sc., professor (Kazan Federal University)

  9. A feasibility study of conceptual design for international clean energy network using hydrogen conversion technology

    International Nuclear Information System (INIS)

    Sato, Takashi; Hamada, Akiyoshi; Kitamura, Kazuhiro

    1998-01-01

    Clean energy is more and more required worldwide in proportion to actualization of global environmental issues including global warming. Therefore, it is an urgent task to realize promotion of worldwide introduction of clean energy which exists abundantly and is widely distributed in the world, such as hydropower and solar energy, while reducing the dependence on fossil fuel. However, since the renewable energy, differing from so called fossil fuel, is impossible to transport for long distance and store as it is, its utilization is subject to be limited. As one possible resolution of this kind of issues, 'International clean energy network using hydrogen conversion technology' which enables conversion of renewable energy from low cost hydropower into hydrogen energy and also into the transportable and storable form, is a meaningful concept. This system technology enables dealing of this hydrogen energy in international market as in the same manner as fossil fuel. It is considered to enable promotion of international and large scale introduction of such clean energy, along with the contribution to diversified and stabilized international energy supply. In this study, based upon the above-mentioned point of view and assumption of two sites, one on supply side and another on demand side of hydrogen energy, three systems are presumed. One of the systems consists of liquid hydrogen as transportation and storage medium of hydrogen, and the others intermediately convert hydrogen into methanol or ammonia as an energy carrier. A overall conceptual design of each system spanning from hydrogen production to its utilization, is conducted in practical way in order to review the general technical aspects and economical aspects through cost analysis. This study is administrated through the New Energy and Industrial Technology Development Organization (NEDO) as a part of the International Clean Energy Network Using Hydrogen Conversion (so-called WE-NET) Program with funding from

  10. 1st International Ocean Technology Congress on EEZ Resources : Technology Assessment

    CERN Document Server

    Champ, Michael

    1990-01-01

    Today western nations consume annually only a small percentage of their resources from the sea, despite the proclamation of Exclusive Economic Zones (EEZ) by many. In contrast, most Pacific Basin Countries obtain more than a quarter of their annual needs from the ocean. Determination of greater rewards from the development of marine resources is markedly inhibited by the limited technical abilities available to locate and assess them. Knowledge of Exclusive Economic Zone resources is schematic and generalised, and a detailed understanding of the geology and processes relating to the economic use of the seafloor is both fragmentary and very basic. Technology for mapping the mineral resources of continental shelves and ocean areas, except in active offshore hydrocarbon provinces, has been largely developed in pursuit of scientific objectives and competence to rapidly appraise economic potential is limited. Similarly, the capability to characterise and evaluate the other resources of the seas is rudimentary. The...

  11. Innovation and international technology transfer: The case of the Chinese photovoltaic industry

    International Nuclear Information System (INIS)

    Tour, Arnaud de la; Glachant, Matthieu; Meniere, Yann

    2011-01-01

    China is the largest solar photovoltaic cell producer in the world, with more than one third of worldwide production in 2008, exporting more than 95 percent of what it produces. The purpose of this paper is to understand the drivers of this success and its limits, with a particular emphasis on the role of technology transfers and innovation. Our analysis combines a review of international patent data at a detailed technology level with field interviews of ten Chinese PV companies. We show that Chinese producers have acquired the technologies and skills necessary to produce PV products through two main channels: the purchasing of manufacturing equipment in a competitive international market and the recruitment of skilled executives from the Chinese diaspora who built pioneer PV firms. The success of these firms in their market is, however, not reflected in their performance in terms of innovation. Rather, patent data highlight a policy-driven effort to catch up in critical technological areas. - Research Highlights: →China has become the world leader in the production of PV cells and modules, but remains far behind industrialized countries in the more upstream segments of the photovoltaic industry. →International technology transfers from industrialized countries to China have taken place through two main channels: the competitive market of manufacturing equipments, and labour mobility. →Fierce competition between equipment manufacturers and public availability of core technology have prevented intellectual property rights from hindering technology transfers towards China. →As compared with their foreign competitors, Chinese firms file many patents, but of low technical and commercial value. →Chinese firms' innovation is focused on process rather than on products.

  12. PREFACE: 7th International Conference on Cooling & Heating Technologies (ICCHT 2014)

    Science.gov (United States)

    2015-09-01

    The Kyoto protocol has initiated a pledge from almost all developing and developed countries to be committed to reducing CO2 emissions. Development of new renewable energy technologies are also of interest in this conference. Greenhouse gases have contributed to global warming and other man-made disasters. Cooling and Heating communities also have responsibilities towards the commitment of reducing the greenhouse gas emissions. In addition, depleting natural resources also act as a threat to the Cooling and Heating industries, causing them to develop highly efficient equipment and innovative technologies. The 1st International Conference on Cooling & Heating Technologies was held in Hanoi Vietnam (Jan. 2005). Whereas the 2nd, 3rd, 4th and 5th ICCHT conferences were held in Dalian, China (Jul. 2006), Tokyo, Japan (Jul. 2007), Jinhae, Korea (Oct. 2008) and Bandung, Indonesia (Dec. 2010) respectively. The 6th International Conference on Cooling & Heating Technologies (ICCTH2012) was held in Xi'an in China on November 9-12, 2012. It is our pleasure to welcome you to the 7th International Conference on Cooling & Heating Technologies (ICCTH2014) on 4th - 6th November 2014 at the Grand Dorsett Subang Hotel, Subang Jaya, Selangor Darul Ehsan, Malaysia The Theme of the Conference is ''Sustainability and Innovation in Heating & Cooling Technologies''. The sub-themes are:- • CO2 Reduction and Low Carbon Technologies • HVAC System and Natural Ventilation • Energy & Alternative Energy • Computational Fluid Dynamics • Low Temperature & Refrigeration Engineering In conjunction with the Conference, an Exhibition will be organized as an integral part of the Conference. Project experiences, product solutions, new applications and state-of-the art information will be highlighted.

  13. Proceedings of the sixth IEA international workshop on beryllium technology for fusion

    International Nuclear Information System (INIS)

    Kawamura, Hiroshi; Tanaka, Satoru; Ishitsuka, Etsuo

    2004-03-01

    This report is the Proceedings of the Sixth International Energy Agency International Workshop on Beryllium Technology for Fusion. The workshop was held on December 2-5, 2003, at SEAGAIA in Miyazaki City, Japan with 69 participants who attended from Europe, the Russian Federation, Kazakhstan, Ukraine, China, the United States and Japan. The topics for papers were arranged into nine sessions; Status of beryllium study, Plasma and tritium interactions, ITER oriented issues, Neutron irradiation effects, Beryllide application, Disposal and recycling, Molten salt, Health and safety issues and Panel discussion. In the Panel discussion, the international collaboration for three topics, i.e., Neutron irradiation effects, Beryllide application, Recycling and Disposal, were discussed, and necessary items for the international collaboration were proposed. The 46 of the presented papers are indexed individually. (J.P.N.)

  14. What makes Chinese firms to choose international external technology sources? An inquiry on internationalization, innovation and institutions

    DEFF Research Database (Denmark)

    Li-Ying, Jason; Wang, Yuandi

    2013-01-01

    External technology sourcing from developed countries has been one of the most important vehicles by which emerging market firms (EMFs) sustain competiveness. Foreign advanced technologies offer EMFs opportunities to gain access to state-of-the-art technologies and upgrade their competitiveness....... However, we have also witnessed an emerging trend of external acquisition of technology by EMFs firms in both international and domestic markets. Why some EMFs are active in sourcing both domestic and international technologies instead of being significantly in favour of foreign technologies from...... framework. Based on a unique sample of 389 Chinese firms on their inward technology licensing activities through an observation period from 2000 to 2005, it is found that (1) firms’ international market orientation; (2) firm’s technological capability; (3) regional innovation capability; and (4...

  15. International Symposium for the Promotion of APEC Environmental Technology Exchange; APEC kankyo gijutsu koryu sokushin symposium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-11

    The International Symposium for the Promotion of APEC Environmental Technology Exchange was held under the theme `The function and role expected of the APEC Virtual Center,` with the objectives of clarifying the need for future intra-regional environmental technological exchange, defining the types of information and personnel exchange, and promoting the use of interactive character of the APEC Virtual Center for Environmental Technology Exchange by encouraging access to and participation in the Virtual Center project. It was held in the period of 11th and 12th, November in 1996, at the venue of Rinku International Convention Center in Osaka. The symposium was attended by 477 persons from nine countries, i.e., Australia, Canada, China, Indonesia, Korea, Philippines, Thailand, the US, and Japan, comprising staff members of intra-regional environment-related organizations. After the keynote speech, `Current status and tasks of environmental technology exchange`, and `Expected roles of the Virtual Center for Environmental Technology Exchange` were discussed. During the plenary session, the chairman summarized the symposium. This summary was carried on the Virtual Center homepage of the Internet

  16. Clean coal technologies---An international seminar: Seminar evaluation and identification of potential CCT markets

    International Nuclear Information System (INIS)

    Guziel, K.A.; Poch, L.A.; Gillette, J.L.; Buehring, W.A.

    1991-07-01

    The need for environmentally responsible electricity generation is a worldwide concern. Because coal is available throughout the world at a reasonable cost, current research is focusing on technologies that use coal with minimal environmental effects. The United States government is supporting research on clean coal technologies (CCTs) to be used for new capacity additions and for retrofits to existing capacity. To promote the worldwide adoption of US CCTs, the US Department of Energy, the US Agency for International Development, and the US Trade and Development Program sponsored a two-week seminar titled Clean Coal Technologies -- An International Seminar. Nineteen participants from seven countries were invited to this seminar, which was held at Argonne National Laboratory in June 1991. During the seminar, 11 US CCT vendors made presentations on their state-of-the-art and commercially available technologies. The presentations included technical, environmental, operational, and economic characteristics of CCTs. Information on financing and evaluating CCTs also was presented, and participants visited two CCT operating sites. The closing evaluation indicated that the seminar was a worthwhile experience for all participants and that it should be repeated. The participants said CCT could play a role in their existing and future electric capacity, but they agreed that more CCT demonstration projects were needed to confirm the reliability and performance of the technologies

  17. An international partnership approach to clean energy technology innovation: Carbon capture and storage

    Science.gov (United States)

    Yang, Xiaoliang

    Is a global research partnership effective in developing, deploying, and diffusing clean energy technologies? Drawing on and extending innovation system studies, this doctoral dissertation elaborates an analytical model for a global technology learning system; examines the rationales, mechanisms, and effectiveness of the United States-- China Clean Energy Research Center Advanced Coal Technology Consortium (CERC-ACTC); and analyzes government's role in developing and implementing carbon capture and storage technologies in the United States (U.S.) and China. Studies have shown that successful technology innovation leads to economic prosperity and national competence, and prove that technology innovation does not happen in isolation but rather within interactive systems among stakeholders. However, the innovation process itself remains unclear, particularly with regard to interactive learning among and between major institutional actors, including technology developers, regulators, and financial organizations. This study seeks to advance scholarship on the interactive learning from the angle of global interactive learning. This dissertation research project seeks, as well, to inform policy-makers of how to strengthen international collaboration in clean energy technology development. The U.S.--China CERC-ACTC announced by Presidents Obama and Hu in 2009, provided a unique opportunity to close this scholarly gap. ACTC aimed to "advance the coal technology needed to safely, effectively, and efficiently utilize coal resources including the ability to capture, store, and utilize the emissions from coal use in both nations " through the joint research and development by U.S. and Chinese scientists and engineers. This dissertation project included one-year field research in the two countries, with in-depth interviews of key stakeholders, a survey of Consortium participants, analysis of available data, and site visits to collaborative research projects from 2013-2014. This

  18. CTBT verification-related technologies for peaceful purposes: the French experiences of international cooperation

    International Nuclear Information System (INIS)

    Massinon, B.

    1999-01-01

    The French experience concerning CTBT verification-related technologies for peaceful purposes as well a the international cooperation in this field are presented. Possible objectives and cooperation program needs are cited. French experience in international cooperation is related to seismology and seismic hazards in Bolivia, Madagascar, Nepal and Indonesia and is considered as very constructive, meaning that technical experience is developed, consistent scientific results are obtained, and a considerable yield to the CTBT task is achieved. Large scientific benefits are expected from the CTBTO

  19. Proceedings of the 2nd International Workshop on Architectures, Concepts and Technologies for Service Oriented Computing (ACT4SOC 2008)

    NARCIS (Netherlands)

    van Sinderen, Marten J.; Unknown, [Unknown

    2008-01-01

    This volume contains the proceedings of the Second International Workshop on Architectures, Concepts and Technologies for Service Oriented Computing (ACT4SOC 2008), held on July 5 in Porto, Portugal, in conjunction with the Third International Conference on Software and Data Technologies (ICSOFT

  20. A study on international nuclear cooperation and technology self-reliance strategies for nuclear development in other countries

    International Nuclear Information System (INIS)

    Choi, Young Myung; Han, Pil Soon; Park, Yun Sik; Song, Ki Dong; Yang, Mang Ho; Oh, Keun Bae; Jang, Hong Lae; Lee, Dong Jin; Lee, Kang Suk; Kim, Sung Ki; Ko, Han Suk

    1993-12-01

    This study deals with international nuclear cooperation and technology self-reliance for nuclear development in other countries. This study also analyses the international and domestic nuclear environment such as NPT, nuclear export control, gloval environmental issues, and public acceptance. Finally, a suggestion is made for the future direction of strategy for nuclear technology self-reliance in Korea. (Author)

  1. First International Symposium on Applied Computing and Information Technology (ACIT 2013)

    CERN Document Server

    Applied Computing and Information Technology

    2014-01-01

    This book presents the selected results of the 1st International Symposium on Applied Computers and Information Technology (ACIT 2013) held on August 31 – September 4, 2013 in Matsue City, Japan, which brought together researchers, scientists, engineers, industry practitioners, and students to discuss all aspects of  Applied Computers & Information Technology, and its practical challenges. This book includes the best 12 papers presented at the conference, which were chosen based on review scores submitted by members of the program committee and underwent further rigorous rounds of review.  

  2. IFMIF (International Fusion Materials Irradiation Facility) key element technology phase interim report

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Hiroo; Ida, Mizuho; Sugimoto, Masayoshi; Takeuchi, Hiroshi; Yutani, Toshiaki (eds.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2002-03-01

    Activities of International Fusion Materials Irradiation Facility (IFMIF) have been performed under an IEA collaboration since 1995. IFMIF is an accelerator-based deuteron (D{sup +})-lithium (Li) neutron source designed to produce an intense neutron field (2 MW/m{sup 2}, 20 dpa/year for Fe) in a volume of 500 cm{sup 3} for testing candidate fusion materials. In 2000, a 3 year Key Element technology Phase (KEP) of IFMIF was started to reduce the key technology risk factors. This interim report summarizes the KEP activities until mid 2001 in the major project work-breakdown areas of accelerator, target, test facilities and design integration. (author)

  3. Report of the international symposium for ITER. 'Burning plasma science and technology on ITER'

    International Nuclear Information System (INIS)

    2002-10-01

    This report contains the presentations on the International Symposium for ITER, held on Jan. 24, 2002 on the occasion of the ITER Governmental Negotiations in Tokyo. This symposium is organized by Japan Atomic Energy Research Institute with the support of the Ministry of Education, Culture, Sports, Science and Technology (MEXT). The meaningful results were obtained through this symposium especially on new frontiers of science and technology brought by ITER, accelerated road maps towards realizing fusion energy, and portfolio of other fusion configurations from ITER. The 5 of the presented papers are indexed individually (J.P.N.)

  4. International Scientist Mobility and the Locus of Knowledge and Technology Transfer

    DEFF Research Database (Denmark)

    Edler, Jakob; Fier, Hedie; Grimpe, Christoph

    2011-01-01

    Despite the growing interest of scholars and policymakers to better understand the determinants for researchers in public science to transfer knowledge and technology to firms, little is known how temporary international mobility of scientists affects both their propensity to engage in knowledge...... and technology transfer (KTT) as well as the locus of such transfer. Based on a sample of more than 950 German academics from science and engineering faculties, we investigate how the duration and the frequency of scientists’ visits at research institutions outside their home country affect KTT activities. We...

  5. The International Science and Technology Center (ISTC) and ISTC projects related to nuclear safety. Information review

    International Nuclear Information System (INIS)

    Tocheny, Lev V.

    2003-01-01

    The ISTC is an intergovernmental organization created ten years ago by Russia, USA, EU and Japan in Moscow. The Center supports numerous science and technology projects in different areas, from biotechnologies and environmental problems to all aspects of nuclear studies, including those focused on the development of effective innovative concepts and technologies in the nuclear field, in general, and for improvement of nuclear safety, in particular. The presentation addresses some technical results of the ISTC projects as well as methods and approaches employed by the ISTC to foster close international collaboration and manage projects towards fruitful results. (author)

  6. 1ST International Conference on Small Satellites: New Technologies, Achievements, Problems and Prospects for International Co-Operation in the New Millenium

    National Research Council Canada - National Science Library

    1998-01-01

    The Final Proceedings for Small Satellites: New technologies, achievements, problems and prospects for international co-operation in the new millenium, 16 November 1998 - 20 November 1998 This is an interdisciplinary conference...

  7. International Conference on Development and Applications of Nuclear Technologies (NUTECH-2011). Book of Abstracts

    International Nuclear Information System (INIS)

    Dudala, J.; Stegowski, Z.

    2011-01-01

    The main object of the International Conference on Development and Applications of Nuclear Technologies - NUTECH (Cracow, 11-14 September 2011) is to bring together scientists working on the development and application of nuclear technologies and to discuss further research fulfilling the needs of modern society. In the conference participate over 160 researchers from about 20 countries - among them from USA, France, Germany, Italy, Republic of South Africa, Japan, China, Brazil and South Korea . Book of Abstracts covers over 170 presentations - 13 plenary lectures, 42 section lectures and 118 posters. Thy provide information about possibilities and results of the applications of nuclear technologies in the modern economy of the 21 th century and cover the following topics: (a) nuclear energy in Poland; (b) applications of nuclear techniques; (c) nuclear energy and management of radioactive wastes; (d) radiation chemistry; (e) dosimetry and radiation protection; (f) environmental studies; (g) radiotherapy; (h) radiometric measurements; (i) radiopharmaceuticals and radioisotope production; (j) characterization of materials; (k) biomedical studies; (l) nuclear techniques in preserving cultural heritage; (m) applications of nuclear technologies in agriculture and food processing; (n) technological developments. The conference refers to 100-anniversary of the Nobel Prize in Chemistry for Maria Sklodowska-Curie. The conference is organized by Faculty of Physics and Applied Computer Science, AGH University of Science and Technology and Institute of Nuclear Chemistry and Technology. It is financially supported by Polish Energy Group Nuclear Energy S.A. (PGE, Energia Jadrowa), Polish Nuclear Society (PTN), International Atomic Energy Agency, National Atomic Agency (PAA), European Nuclear Society and Municipality of Cracow.

  8. [Innovative educational technology in the teaching of propaedeutic of internal diseases].

    Science.gov (United States)

    Тusupbekova, К; Bakirova, R; Nursultanova, S

    2015-03-01

    This article presents analysis of the results of inculcation of innovative learning technologies in teaching on propaedeutic of internal diseases which is first clinical discipline faced by medical students of the University. Credit-modular training included integration of propaedeutic of internal diseases with basic disciplines of the third year (the normal anatomy, physiology, pathological anatomy, histology, pathophysiology, visual diagnostics and pharmacology). There are 8 models on following systems: respiratory, cardiovascular, musculoskeletal, endocrine, urogenital, hematopoietic, nervous, digestive. The innovative implementation of learning technologies (Problem-based learning, clinical cases, team-oriented teaching, lectures, symposium lectures, discussions, role plays, etc.) and knowledge control (mini-clinical examination, objective structured clinical exam, comprehensive testing) help students to acquire clinical skills, team working and skills of researching work.

  9. The development of beryllium plasma spray technology for the International Thermonuclear Experimental Reactor (ITER)

    International Nuclear Information System (INIS)

    Castro, R.G.; Elliott, K.E.; Hollis, K.J.; Watson, R.D.

    1999-01-01

    Over the past five years, four international parties, which include the European Communities, Japan, the Russian Federation and the United States, have been collaborating on the design and development of the International Thermonuclear Experimental Reactor (ITER), the next generation magnetic fusion energy device. During the ITER Engineering Design Activity (EDA), beryllium plasma spray technology was investigated by Los Alamos National Laboratory as a method for fabricating and repairing and the beryllium first wall surface of the ITER tokamak. Significant progress has been made in developing beryllium plasma spraying technology for this application. Information will be presented on the research performed to improve the thermal properties of plasma sprayed beryllium coatings and a method that was developed for cleaning and preparing the surface of beryllium prior to depositing plasma sprayed beryllium coatings. Results of high heat flux testing of the beryllium coatings using electron beam simulated ITER conditions will also be presented

  10. De-internationalization of small high technology firms: An international entrepreneurship perspective

    DEFF Research Database (Denmark)

    Turcan, Romeo V.

    This study explores the process of de-internationalisation in small high-technology firms. The key research questions are how and why these firms de-internationalise. Being positioned at the intersection of entrepreneurship and international business research paths, the study expressly investigates...... by reduction was employed extensively to advance middle-range theories. The study contributes to (i) international business research by developing a process model of de-internationalisation and defining its constructs; (ii) entrepreneurship research by redefining the entrepreneurial orientation construct...... whether de-internationalisation could be viewed as (i) an entrepreneurial activity; and/or (ii) an integral part of a small high-technology firms’ growth process. Driven by the nature of the research questions, a multiple-case study methodology was adopted for the purpose of theory building. Five firms...

  11. International Conference on Modern Mathematical Methods and High Performance Computing in Science and Technology

    CERN Document Server

    Srivastava, HM; Venturino, Ezio; Resch, Michael; Gupta, Vijay

    2016-01-01

    The book discusses important results in modern mathematical models and high performance computing, such as applied operations research, simulation of operations, statistical modeling and applications, invisibility regions and regular meta-materials, unmanned vehicles, modern radar techniques/SAR imaging, satellite remote sensing, coding, and robotic systems. Furthermore, it is valuable as a reference work and as a basis for further study and research. All contributing authors are respected academicians, scientists and researchers from around the globe. All the papers were presented at the international conference on Modern Mathematical Methods and High Performance Computing in Science & Technology (M3HPCST 2015), held at Raj Kumar Goel Institute of Technology, Ghaziabad, India, from 27–29 December 2015, and peer-reviewed by international experts. The conference provided an exceptional platform for leading researchers, academicians, developers, engineers and technocrats from a broad range of disciplines ...

  12. Proceedings of 18th international conference on structural mechanics in reactor technology

    International Nuclear Information System (INIS)

    2005-07-01

    The 18th International Conference on Structural Mechanics in Reactor Technology was held on August 7-12, 2005 in Beijing, China, and Sponsored by International Association for Structural Mechanics in Reactor Technology, Chinese Nuclear Society, Chinese Society of Theoretical and Applied Mechanics, and Tsinghua University. 486 abstracts are Collected. The contents includes: opening, plenary and keynote presentations; computational mechanics; fuel and core structures; aging, life extension, and license renewal; design methods and rules for components; fracture mechanics; concrete material, containment and other structures; analysis and design for dynamic and extreme loads; seismic analysis, design and qualification; structural reliability and probabilistic safety assessment (PSA); operation, inspection and maintenance; severe accident management and structural evaluation; advanced reactors and generation IV reactors; decommissioning of nuclear facilities and waste management.

  13. Managing nuclear knowledge: IAEA activities and international coordination. Asian Network for Education in Nuclear Technology (ANENT)

    International Nuclear Information System (INIS)

    2007-07-01

    This CD-ROM is attached to the booklet 'Managing nuclear knowledge: IAEA activities and international coordination. Asian Network for Education in Nuclear Technology (ANENT)'. It contains the background material with regard to ANENT in full text, including policy level papers, reports, presentation material made by Member States, and meeting summaries during the period 2002-2005. Further information on the current ANENT activities and related IAEA activities is available at 'http://anent-iaea.org' and 'http://iaea.org/inisnkm'

  14. Argonne National Laboratory contributions to the International Symposium on Fusion Nuclear Technology (ISFNT)

    Energy Technology Data Exchange (ETDEWEB)

    1988-10-01

    A total of sixteen papers with authors from Argonne National Laboratory were presented at the First International Symposium on Fusion Nuclear Technology (ISFNT), held in Tokyo, Japan, in April 1988. The papers cover the results of recent investigations in blanket design and analysis, fusion neutronics, materials experiments in liquid metal corrosion and solid breeders, tritium recovery analysis, experiments and analysis for liquid metal MHD, reactor safety and economic analysis, and transient electromagnetic analysis.

  15. Argonne National Laboratory contributions to the International Symposium on Fusion Nuclear Technology (ISFNT)

    International Nuclear Information System (INIS)

    1988-10-01

    A total of sixteen papers with authors from Argonne National Laboratory were presented at the First International Symposium on Fusion Nuclear Technology (ISFNT), held in Tokyo, Japan, in April 1988. The papers cover the results of recent investigations in blanket design and analysis, fusion neutronics, materials experiments in liquid metal corrosion and solid breeders, tritium recovery analysis, experiments and analysis for liquid metal MHD, reactor safety and economic analysis, and transient electromagnetic analysis

  16. Experiences and challenges of international students in technology-rich learning environments

    OpenAIRE

    Habib, Laurence Marie Anna; Johannesen, Monica; Øgrim, Leikny

    2013-01-01

    This article presents a study of international students and their use of technology in a Scandinavian institution of Higher Education. A special emphasis is placed on patterns of use of a virtual learning environment (VLE) that is available to all the study programmes at the institution. Actor-Network Theory (ANT) is used as a theoretical approach to focus on the socio-material nature of the various networks that students, teachers, course designers, and artefacts make up within the realm of ...

  17. Actual problems of physics and technology. III International youth scientific school-conference. Book of abstracts

    International Nuclear Information System (INIS)

    2014-01-01

    The third International youth scientific school-conference took place 10-13 April 2014 year in Moscow on the basis National Research Nuclear University MEPhI and RAS Lebedev P.N. Physical Institute. The actual scientific problems of current fundamental and applied physics as well as nuclear and physical technologies were discussed. This book of abstracts contains many interesting items devoted problems of theoretical physics and astrophysics, nuclear physics, nanotecnology, laser physics and plasma physics [ru

  18. The development of new energy technologies on a national and international scale

    International Nuclear Information System (INIS)

    Schmidt-Kuester, W.J.

    1976-01-01

    This is a survey of the development of new energy technologies 1) for medium- and long-term energy supply in the FRG, with a partial substitution for natural oil and gas; 2) to reduce the coupling between gross national product and energy; 3) to improve the competitive strength of the economy on an international scale. Boundary conditions are, among others the consideration of environmental protection and long-term energy supply at a reasonable price for the national economy. (HP) [de

  19. International comparison of the definition and the practical application of health technology assessment.

    Science.gov (United States)

    Draborg, Eva; Gyrd-Hansen, Dorte; Poulsen, Peter Bo; Horder, Mogens

    2005-01-01

    Health Technology Assessment (HTA) is defined as a policy research approach that examines the short- and long-term social consequences of the application or use of technology. Internationally different institutions have translated this definition to local contexts. In Denmark, HTA is comprehensive with focus on four aspects of the problem in question (technology [clinical evidence], economy, patient, and organization). The objective of this study is to study how the application of HTA differs across leading countries and to study the extent to which Danish HTA reports differ from foreign HTAs. A sample of 433 HTA reports published in the period 1989--2002 by eleven leading institutions or agencies in Denmark and eight other countries were reviewed. We looked at the characteristics of the HTA with respect to focus on the four main aspects and the manner in which each aspect has been approached. The study shows health technology procedures to be the most common type of health technology assessed in HTAs and literature review to be the most often used method of analysis. Policy recommendations are only present in approximately half of the HTA reports. In the HTAs one generally sees a great focus on the clinical aspect of health technologies, leaving the economic, the patient-related, and the organizational aspect much more unanalyzed. The Danish HTAs generally have a wider scope than HTAs produced in other countries and tend to focus more frequently on patient-related and organizational dimensions.

  20. Manpower development and international cooperation in Nuclear Technology and Education Center, JAERI

    International Nuclear Information System (INIS)

    Shiba, Koreyuki; Tojo, Takao; Takada, Kazuo; Nomura, Masayuki

    1996-01-01

    Nuclear Technology and Education Center was founded in 1958 and now has two branches, Tokyo Education Center at Bunkyo-ku, Tokyo and Tokai Education Center at Tokai, Ibaraki-ken. The objective was to educate and train nuclear engineers and scientists for implementing the nation's program of atomic energy research, development and utilization. A variety of training courses have been prepared and carried out to meet the requirements of the nuclear community. In recent years, activities of getting the public acceptance have become important for nuclear energy deployment in Japan. Many short courses have been implemented at JAERI sites and cities for providing the public including high school teachers with basic knowledge on nuclear energy. International training programs of the center were started with the cooperation of the Japan International Cooperation Agency (JICA) in 1985 and of the International Atomic Energy Agency (IAEA) in 1987. International seminars were implemented for improving nuclear safety by inviting participants from the former Soviet Union, central/east European countries and the neighboring countries of Japan under the direction of the Science and Technology Agency (STA) in 1992. STA and JAERI are starting new programs of helping Asian and Pacific countries to develop nuclear manpower. (author)

  1. Review of R and D status on beryllium technology for fusion in Japan reported at the fifth IEA international workshop on beryllium technology for fusion

    International Nuclear Information System (INIS)

    Kawamura, Hiroshi

    2002-06-01

    In this paper, the R and D status on beryllium technology for fusion reactor in Japan were reviewed with the reports at the Fifth IEA International Workshop on Beryllium Technology for Fusion. This international workshop was held on October 10-12, 2001, at the Congress Center of the Financial Academy with about 60 participants who attended from ten countries (Germany, the Russian Federation, Kazakhstan, the United States, Japan, etc.). There were 39 presentations in this workshop including 13 presentations from Japan. From the review of the latest results of R and D status on beryllium technology for fusion reactor in Japan, the recent trend in beryllium technology was made clear. As neutron multiplier technology development, the studies are being concentrated into the beryllide (Be 12 Ti, etc.) by most Japanese researchers. As ITER first wall material technology, the Hot Isostatic Pressing (HIP) bonding technology with copper alloys attracts attentions. (author)

  2. Proceedings of the international symposium on environmental technologies: Plasma systems and applications. Volume 1

    International Nuclear Information System (INIS)

    Mayne, P.W.; Mulholland, J.A.

    1995-01-01

    Plasma technology is an extremely versatile and powerful means of obtaining very high temperatures that can be used in a variety of environmental situations. Since most types of waste products and contaminants can be treated effectively and efficiently, plasma systems have been developed to address the disposal and annihilation domestic of medical, hazardous, radioactive, military, and miscellaneous wastes. Plasma technologies can also be implemented to recycle and recover usable materials from metallic wastes. The International Symposium on Environmental Technologies: Plasma Systems and Applications was held at the Omni Hotel in Atlanta, Georgia on October 8--12, 1995 to bring together a large group of technical experts working on the use of plasma for solving environmental problems. The Symposium is a sequel to the 1994 Metatechnies Conference on Stabilization and Volarization of Ultimate Waste by Plasma Processes that was held in September of 1994 at Bordeaux Lac, France. The proceedings to this second international conference contain the written contributions from eleven sessions and are published in two volumes. A total of 65 papers address the use of plasma systems for environmental applications and include topics concerning the development and use of innovative technologies for waste treatment, environmental remediation, recycling, characterization of the plasma and solid residue, off-gas analyses, as well as case studies and regulatory policies

  3. 2nd International Conference on Electrical Systems, Technology and Information 2015

    CERN Document Server

    Tanoto, Yusak; Lim, Resmana; Santoso, Murtiyanto; Pah, Nemuel

    2016-01-01

    This book includes the original, peer-reviewed research papers from the 2nd International Conference on Electrical Systems, Technology and Information (ICESTI 2015), held in September 2015 at Patra Jasa Resort & Villas Bali, Indonesia. Topics covered include: Mechatronics and Robotics, Circuits and Systems, Power and Energy Systems, Control and Industrial Automation, and Information Theory.    It explores emerging technologies and their application in a broad range of engineering disciplines, including communication technologies and smart grids. It examines hybrid intelligent and knowledge-based control, embedded systems, and machine learning. It also presents emerging research and recent application in green energy system and storage. It discusses the role of electrical engineering in biomedical, industrial and mechanical systems, as well as multimedia systems and applications, computer vision and image and signal processing. The primary objective of this series is to provide references for disseminat...

  4. 2nd International Conference on Education and Educational Technology (EET 2011)

    CERN Document Server

    Education and Educational Technology

    2012-01-01

    This volume includes extended and revised versions of a set of selected papers from the 2011 2nd International Conference on Education and Educational Technology (EET 2011) held in Chengdu, China, October 1-2, 2011. The mission of EET 2011 Volume 1 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of education and educational technology to disseminate their latest research results and exchange views on the future research directions of these fields. 130 related topic papers were selected into this volume. All the papers were reviewed by 2 program committee members and selected by the volume editor Prof. Yuanzhi Wang, from Intelligent Information Technology Application Research Association, Hong Kong. The conference will bring together leading researchers, engineers and scientists in the domain of interest. We hope every participant can have a good opportunity to exchange their research ideas and results and to discuss the state of the art in th...

  5. International Nuclear Management Academy Requirements for University Master’s Programmes in Nuclear Technology Management

    International Nuclear Information System (INIS)

    Grosbois, J. de; Hirose, H.; Adachi, F.; Liu, L.; Hanamitsu, K.; Kosilov, A.; Roberts, J.

    2016-01-01

    Full text: The development of any national nuclear energy programme is dependent on the successful development of qualified human resources, through a sustainable nuclear education and training programmes supported by government and industry. Among the broad range of specialists needed for the continued safe and economic utilization of nuclear technology for peaceful purposes, are a most vital component—managers. The International Nuclear Management Academy (INMA) is an IAEA facilitated collaboration framework in which universities provide master’s degree programmes focusing on the management aspect for the nuclear sector. INMA master’s programmes in Nuclear Technology Management (NTM) specify a common set of competency requirements that graduates should acquire to prepare them to become competent managers. This paper presents an overview of the INMA collaboration framework and the requirements for partner universities to implement master’s programmes in Nuclear Technology Management. (author

  6. 2nd International Colloquium on Sports Science, Exercise, Engineering and Technology 2015

    CERN Document Server

    Sulaiman, Norasrudin; Adnan, Rahmat

    2016-01-01

    The proceeding is a collection of research papers presented at the 2nd International Colloquium on Sports Science, Exercise, Engineering and Technology (ICoSSEET2015), a conference dedicated to address the challenges in the areas of sports science, exercise, sports engineering and technology including other areas of sports, thereby presenting a consolidated view to the interested researchers in the aforesaid fields. The goal of this conference was to bring together researchers and practitioners from academia and industry to focus on the scope of the conference and establishing new collaborations in these areas. The topics of interest are in mainly (1) Sports and Exercise Science (2) Sports Engineering and Technology Application (3) Sports Industry and Management.

  7. Proceedings of the International Association for Development of the Information Society (IADIS) International Conference on Educational Technologies (5th, Sydney, Australia, December 11-13, 2017)

    Science.gov (United States)

    Kommers, Piet, Ed.; Issa, Tomayess, Ed.; Isaias, Pedro, Ed.; Hol, Ana, Ed.

    2017-01-01

    These proceedings contain the papers and posters of the 5th International Conference on Educational Technologies 2017 (ICEduTech 2017), which has been organised by the International Association for Development of the Information Society and co-organised by the Western Sydney University, held in Sydney, Australia, 11-13 December 2017. ICEduTech is…

  8. The International Stripa Project: Technology transfer from cooperation in scientific and technological research on nuclear waste disposal

    International Nuclear Information System (INIS)

    Levich, R.A.; Ferrigan, P.M.; Wilkey, P.L.

    1990-01-01

    The Nuclear Energy Agency of the organization for Economic Cooperation and Development (OECD/NEA) sponsors the International Stripa Project. The objectives of the Stripa Project are to develop techniques for characterizing sites located deep in rock formations that are potentially suitable for the geologic disposal of high-level radioactive wastes and to evaluate particular engineering design considerations that could enhance the long-term safety of a high-level radioactive waste repository in a geologic medium. The purpose of this paper is to briefly summarize the research conducted at Stripa and discuss the ways in which the technology developed for the Stripa Project has been and will be transfered to the United States Civilian Radioactive Waste Management Program's Yucca Mountain Project. 3 refs., 2 figs

  9. The International Stripa Project: Technology transfer from cooperation in scientific and technological research on nuclear waste disposal

    Energy Technology Data Exchange (ETDEWEB)

    Levich, R.A. [USDOE Nevada Operations Office, Las Vegas, NV (USA). Yucca Mountain Project Office; Patera, E.S. [Los Alamos National Lab., NM (USA); Ferrigan, P.M. [USDOE Chicago Operations Office, Argonne, IL (USA); Wilkey, P.L. [CER Corp., Argonne, IL (USA)

    1990-04-01

    The Nuclear Energy Agency of the organization for Economic Cooperation and Development (OECD/NEA) sponsors the International Stripa Project. The objectives of the Stripa Project are to develop techniques for characterizing sites located deep in rock formations that are potentially suitable for the geologic disposal of high-level radioactive wastes and to evaluate particular engineering design considerations that could enhance the long-term safety of a high-level radioactive waste repository in a geologic medium. The purpose of this paper is to briefly summarize the research conducted at Stripa and discuss the ways in which the technology developed for the Stripa Project has been and will be transfered to the United States Civilian Radioactive Waste Management Program`s Yucca Mountain Project. 3 refs., 2 figs.

  10. Do External or Internal Technology Spillovers Have a Stronger Influence on Innovation Efficiency in China?

    Directory of Open Access Journals (Sweden)

    Xionghe Qin

    2017-09-01

    Full Text Available In this study, we bridge an important gap in the literature by comparing the extent to which external technology spillovers, as indicated by foreign direct investment (FDI, and internal technology spillovers, as indicated by university-institute-industry cooperation (UIC, influence innovation efficiency in China. We divide the innovation process into two sequential stages, namely the knowledge creation and technology commercialization stages, and employ a network data envelopment analysis approach to measure innovation efficiency at each stage. The spatial analysis of the distribution of knowledge creation efficiency and technology commercialization efficiency reveals the heterogeneity of innovation efficiency at the provincial level. Then, a panel data regression is used to analyze the effect of FDI and UIC on innovation efficiency at each stage, using data from 2009 to 2015 for 30 provinces in China. By comparing FDI with UIC, we find that FDI has a higher coefficient and stronger significance level at the knowledge creation stage, while only industry-institute linkages exhibit a stronger association with innovation efficiency at the technology commercialization stage.

  11. International conference on innovative technologies for nuclear fuel cycles and nuclear power. Unedited proceedings

    International Nuclear Information System (INIS)

    2004-01-01

    Nuclear power is a significant contributor to the global supply of electricity, and continues to be the major source that can provide electricity on a large scale with a comparatively minimal impact on the environment. But it is evident that, despite decades of experience with this technology, nuclear power today remains mainly in a holding position, with its future somewhat uncertain primarily due to concerns related to waste, safety and security. One of the most important factors that would influence future nuclear growth is the innovation in reactor and fuel cycle technologies to successfully maximize the benefits of nuclear power while minimizing the associated concerns. The main objectives of the Conference were to facilitate exchange of information between senior experts and policy makers from Member States and international organizations on important aspects of the development of innovative technologies for future generations of nuclear power reactors and fuel cycles; to create an understanding of the social, environmental and economic conditions that would facilitate innovative and sustainable nuclear technologies; and to identify opportunities for collaborative work between Member States and international organizations and programmes. All relevant aspects of innovative technologies for nuclear fuel cycles and nuclear power were discussed in an open, frank and objective manner. These proceedings contain a summary of the results of the conference, invited and contributed papers, and summaries of panel discussions. No large increase in the use of nuclear energy is foreseen in the near and medium term, but is likely in the long term if developing country per-capita electricity consumption reaches that of the developed world. The nuclear sector including regulators view an increased use of nuclear energy as the solution for global sustainable energy needs considering that significant reductions in CO 2 emissions would be required. Although the current nuclear

  12. ic-cmtp3: 3rd International Conference on Competitive Materials and Technology Processes

    Science.gov (United States)

    2016-04-01

    Competitiveness is one of the most important factors in our lives and it plays a key role in the efficiency both of organizations and societies. The more scientifically advanced and prepared organizations develop more competitive materials with better physical, chemical, and biological properties, and the leading companies apply more competitive equipment and technological processes. The aims of the 3rd International Conference on Competitive Materials and Technology Processes (ic-cmtp3), and the 1st International Symposium on Innovative Carbons and Carbon Based Materials (is-icbm1) and the 1st International Symposium on Innovative Construction Materials (is-icm1) organized alongside are the following: —Promote new methods and results of scientific research in the fields of material, biological, environmental and technological sciences; —Exchange information between the theoretical and applied sciences as well as technical and technological implementations; —Promote communication and collaboration between the scientists, researchers and engineers of different nations, countries and continents. Among the major fields of interest are advanced and innovative materials with competitive characteristics, including mechanical, physical, chemical, biological, medical and thermal, properties and extreme dynamic strength. Their crystalline, nano - and micro-structures, phase transformations as well as details of their technological processes, tests and measurements are also in the focus of the ic-cmtp3 conference and the is-scbm1 and is-icm1 symposia. Multidisciplinary applications of material science and the technological problems encountered in sectors like ceramics, glasses, thin films, aerospace, automotive and marine industries, electronics, energy, construction materials, medicine, biosciences and environmental sciences are of particular interest. In accordance with the program of the ic-cmtp3 conference and is-icbm1 and is-icm1 symposia we have received more

  13. International Regulations and Recommendations for Utility Data for Health Technology Assessment.

    Science.gov (United States)

    Rowen, Donna; Azzabi Zouraq, Ismail; Chevrou-Severac, Helene; van Hout, Ben

    2017-12-01

    Recommendations and guidelines for the collection, generation, source and usage of utility data for health technology assessment (HTA) vary across different countries, with no international consensus. Many international agencies generate their own guidelines providing details on their preferred methods for HTA submissions, and there is variability in both what they recommend and the clarity and amount of detail provided in their guidelines. This article provides an overview of international regulations and recommendations for utility data in HTA for a selection of key HTA countries: Australia, Canada, France, Germany, the Netherlands, Spain (Catalonia), Sweden and the UK (England/Wales and Scotland). International guidelines are typically clear and detailed for the selection of countries assessed regarding the source description of health states (e.g. generic preference-based measure) and who should provide preference weights for these health states (e.g. general population for own country). Many guidelines specify the use of off-the-shelf generic preference-based measures, and some further specify a measure, such as EQ-5D. However, international guidelines are either unclear or lack detailed guidance regarding the collection (e.g. patients report own health), source (e.g. clinical trial) and usage (e.g. adjusting for comorbidities) of utility values. It is argued that there is a need for transparent and detailed international guidelines on utility data recommendations to provide decision makers with the best possible evidence. Where this is not possible it is recommended that best practice should be used to inform the collection, source and usage of utility values in HTA.

  14. Technologies development for environmental restoration and waste management: International university and research institution and industry partnerships

    International Nuclear Information System (INIS)

    Herndon, R.C.; Moerlins, J.E.; Kuperberg, J.M.

    1996-01-01

    The Institute for Central and Eastern European Cooperative Environmental Research (ICEECER) at Florida State University was formed in 1990 soon after the end of the Cold War. ICEECER consists of a number of joint centers which link FSU, and US as well as international funding agencies, to academic and research institutions in Hungary, Poland, the Czech Republic, Russia, and the other countries of Central and Eastern Europe and the Newly Independent States. Areas of interest include risk assessment, toxicology, contaminated site remediation/characterization, waste management, emergency response, environmental technology development/demonstration/transfer, and some specialized areas of research (e.g., advanced chemical separations). Through ICEECER, numerous international conferences, symposia, training courses, and workshops have also been conducted on a variety of environmental topics. This paper summarizes the mission, structure, and administration of ICEECER and provides information on the projects conducted through this program at FSU

  15. PREFACE: 3rd International Symposium ''Optics and its Applications''

    Science.gov (United States)

    Calvo, M. L.; Dolganova, I. N.; Gevorgyan, N.; Guzman, A.; Papoyan, A.; Sarkisyan, H.; Yurchenko, S.

    2016-01-01

    The SPIE.FOCUS Armenia: 3rd International Symposium ''Optics and its Applications'' (OPTICS-2015) http://rau.am/optics2015/ was held in Yerevan, Armenia, in the period October 1 - 5, 2015. The symposium was organized by the International Society for Optics and Photonics (SPIE), the Armenian SPIE student chapter with collaboration of the Armenian TC of ICO, the Russian-Armenian University (RAU), the Institute for Physical Research of National Academy of Sciences of Armenia (IPR of NAS), the Greek-Armenian industrial company LT-PYRKAL, and the Yerevan State University (YSU). The Symposium was co-organized by the SPIE & OSA student chapters of BMSTU, the Armenian OSA student chapter, and the SPIE student chapters of Lund University and Wroclaw University of Technology. The symposium OPTICS-2015 was dedicated to the International Year of Light and Light-Based Technologies. OPTICS-2015 was devoted to modern topics and optical technologies such as: optical properties of nanostructures, silicon photonics, quantum optics, singular optics & its applications, laser spectroscopy, strong field optics, biomedical optics, nonlinear & ultrafast optics, photonics & fiber optics, and mathematical methods in optics. OPTICS-2015 was attended by 100 scientists and students representing 17 countries: Armenia, China, Czech Republic, France, Georgia, Germany, India, Iran, Italy, Latvia, Mexico, Poland, Russia, Saudi Arabia, Sweden, Ukraine, and USA. Such a broad international community confirmed the important mission of science to be a uniting force between different countries, religions, and nations. We hope that OPTICS-2015 inspired and motivated students and young scientists to work in optics and in science in general. The present volume of Journal of Physics: Conference Series includes proceedings of the symposium covering various aspects of modern problems in optics. We are grateful to all people who were involved in the organization process. We gratefully acknowledge support from

  16. Proceedings of the 12. international conference on mechatronics technology : ICMT 2008

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    The theme for the 2008 international conference on mechatronics technology (ICMT) was the applications of mechatronics to natural resources to address the growing energy demands that the world will face in the future. It was attended by researchers, engineers and practitioners who presented the latest accomplishments, innovations and potential future directions in mechatronics and emerging application trends. The objective of ICMT 2008 was to facilitate dialogue among experts on issues relating to research and technological developments in mechatronics. The sessions of the conference were entitled: advanced mechatronic devices; bioengineering; human resource development and education; information and networking; mechatronic sensing and control; mechantronics and natural resources; micro-electro-mechanical systems and nano-electro-mechanical systems (MEMS-NEMS); and production systems. The conference featured 44 presentations, of which 4 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  17. On-Orbit Measurement of Next Generation Space Solar Cell Technology on the International Space Station

    Science.gov (United States)

    Wolford, David S.; Myers, Matthew G.; Prokop, Norman F.; Krasowski, Michael J.; Parker, David S.; Cassidy, Justin C.; Davies, William E.; Vorreiter, Janelle O.; Piszczor, Michael F.; McNatt, Jeremiah S.

    2015-01-01

    Measurement is essential for the evaluation of new photovoltaic (PV) technology for space solar cells. NASA Glenn Research Center (GRC) is in the process of measuring several solar cells in a supplemental experiment on NASA Goddard Space Flight Center's (GSFC) Robotic Refueling Mission's (RRM) Task Board 4 (TB4). Four industry and government partners have provided advanced PV devices for measurement and orbital environment testing. The experiment will be on-orbit for approximately 18 months. It is completely self-contained and will provide its own power and internal data storage. Several new cell technologies including four- junction (4J) Inverted Metamorphic Multijunction (IMM) cells will be evaluated and the results compared to ground-based measurements.

  18. International academic program in technologies of light-water nuclear reactors. Phases of development and implementation

    International Nuclear Information System (INIS)

    Geraskin, N I; Glebov, V B

    2017-01-01

    The results of implementation of European educational projects CORONA and CORONA II dedicated to preserving and further developing nuclear knowledge and competencies in the area of technologies of light-water nuclear reactors are analyzed. Present article addresses issues of design and implementation of the program for specialized training in the branch of technologies of light-water nuclear reactors. The systematic approach has been used to construct the program for students of nuclear specialties, which corresponding to IAEA standards and commonly accepted nuclear principles recognized in the European Union. Possibilities of further development of the international cooperation between countries and educational institutions are analyzed. Special attention is paid to e-learning/distance training, nuclear knowledge preservation and interaction with European Nuclear Education Network. (paper)

  19. Proceedings of the 2. IASTED international conference on advanced technology in the environmental field

    International Nuclear Information System (INIS)

    Ubertini, L.

    2006-01-01

    This international conference provided a forum for representatives from academic institutions, government agencies, and industries to discuss emerging technologies in the environmental field. Recent developments in physico-chemical remediation technologies were reviewed, as well as strategies related to waste water treatment in urban and coastal regions. Advances in bio-plastics and bio-hydrogen production were also discussed along with various bioremediation techniques. Strategies related to urban drainage and wetland management were presented together with issues related to energy efficiency and ecological sustainability. The conference was divided into 6 sections: (1) wastewater treatment and reuse; (2) biotechnology, bioremediation and biomass; (3) integrated water resources management; (4) alternative energy systems; (5) decision support tools; and (6) groundwater and soil remediation. The conference featured 48 presentations, of which 9 have been catalogued separately for inclusion in this database. refs., tabs., figs

  20. 2nd International Conference on Education and Educational Technology (EET 2011)

    CERN Document Server

    Education Management, Education Theory and Education Application

    2012-01-01

    This volume includes extended and revised versions of a set of selected papers from the 2011 2nd International Conference on Education and Educational Technology (EET 2011) held in Chengdu, China, October 1-2, 2011. The mission of EET 2011 Volume 2 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of education management, education theory and education application to disseminate their latest research results and exchange views on the future research directions of these fields. 133 related topic papers were selected into this volume. All the papers were reviewed by 2 program committee members and selected by the volume editor Prof. Yuanzhi Wang, from Intelligent Information Technology Application Research Association, Hong Kong. The conference will bring together leading researchers, engineers and scientists in the domain of interest. We hope every participant can have a good opportunity to exchange their research ideas and results and to discus...

  1. International academic program in technologies of light-water nuclear reactors. Phases of development and implementation

    Science.gov (United States)

    Geraskin, N. I.; Glebov, V. B.

    2017-01-01

    The results of implementation of European educational projects CORONA and CORONA II dedicated to preserving and further developing nuclear knowledge and competencies in the area of technologies of light-water nuclear reactors are analyzed. Present article addresses issues of design and implementation of the program for specialized training in the branch of technologies of light-water nuclear reactors. The systematic approach has been used to construct the program for students of nuclear specialties, which corresponding to IAEA standards and commonly accepted nuclear principles recognized in the European Union. Possibilities of further development of the international cooperation between countries and educational institutions are analyzed. Special attention is paid to e-learning/distance training, nuclear knowledge preservation and interaction with European Nuclear Education Network.

  2. International Energy Agency Implementing Agreements and Annexes: A Guide for Building Technologies Program Managers

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Meredydd; Runci, Paul; Meier, Alan

    2008-08-01

    This report presents results from a program evaluation of the U.S. Department of Energy?s Buildings Technologies Program (BTP) participation in collaborative international technology implementing agreements. The evaluation was conducted by researchers from the Pacific Northwest National Laboratory and the Lawrence Berkeley National Laboratory in the fall of 2007 and winter 2008 and was carried out via interviews with stakeholders in four implementing agreements in which BTP participates, reviews of relevant program reports, websites and other published materials. In addition to these findings, the report includes a variety of supporting materials such that aim to assist BTP managers who currently participate in IEA implementing agreements or who may be considering participation.

  3. IFMIF-KEP. International fusion materials irradiation facility key element technology phase report

    International Nuclear Information System (INIS)

    2003-03-01

    The International Fusion Materials Irradiation Facility (IFMIF) is an accelerator-based D-Li neutron source designed to produce an intense neutron field that will simulate the neutron environment of a D-T fusion reactor. IFMIF will provide a neutron flux equivalent to 2 MW/m 2 , 20 dpa/y in Fe, in a volume of 500 cm 3 and will be used in the development and qualification of materials for fusion systems. The design activities of IFMIF are performed under an IEA collaboration which began in 1995. In 2000, a three-year Key Element Technology Phase (KEP) of IFMIF was undertaken to reduce the key technology risk factors. This KEP report describes the results of the three-year KEP activities in the major project areas of accelerator, target, test facilities and design integration. (author)

  4. 5. IEA International workshop on beryllium technology for fusion. Book of abstracts

    International Nuclear Information System (INIS)

    2001-01-01

    The collection includes the abstracts of reports presented to the 5-th IEA international workshop on beryllium technology for fusion. The themes of reports are as follows: status of beryllium technology for fusion in Russia; manufacturing and testing of Be armoured first wall mock-up for ITER; development of the process of diffusion welding of metals stainless steel-copper-beryllium into a single composite; some features of beryllium-laser beam interaction; the effect of irradiation dose on tritium and helium release from neutron irradiated beryllium; thermal properties of neutron irradiated Be 12 Ti. The results of investigating the mechanical properties variation and swelling of beryllium under high temperature neutron irradiation are presented [ru

  5. 7th International Conference in Methodologies and Intelligent Systems for Technology Enhanced Learning

    CERN Document Server

    Gennari, Rosella; Mascio, Tania; Rodríguez, Sara; Prieta, Fernando; Ramos, Carlos; Silveira, Ricardo

    2017-01-01

    This book presents the outcomes of the 7th International Conference in Methodologies and Intelligent Systems for Technology Enhanced Learning (MIS4TEL'17), hosted by the Polytechnic of Porto, Portugal from 21 to 23 June 2017. Expanding on the topics of the previous conferences, it provided an open forum for discussing intelligent systems for technology enhanced learning (TEL) and their roots in novel learning theories, empirical methodologies for their design or evaluation, stand-alone and web-based solutions, and makerspaces. It also fostered entrepreneurship and business startup ideas, bringing together researchers and developers from industry, education and the academic world to report on the latest scientific research, technical advances and methodologies.

  6. IFMIF-KEP. International fusion materials irradiation facility key element technology phase report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    The International Fusion Materials Irradiation Facility (IFMIF) is an accelerator-based D-Li neutron source designed to produce an intense neutron field that will simulate the neutron environment of a D-T fusion reactor. IFMIF will provide a neutron flux equivalent to 2 MW/m{sup 2}, 20 dpa/y in Fe, in a volume of 500 cm{sup 3} and will be used in the development and qualification of materials for fusion systems. The design activities of IFMIF are performed under an IEA collaboration which began in 1995. In 2000, a three-year Key Element Technology Phase (KEP) of IFMIF was undertaken to reduce the key technology risk factors. This KEP report describes the results of the three-year KEP activities in the major project areas of accelerator, target, test facilities and design integration. (author)

  7. 1st International Scientific Conference on Intelligent Information Technologies for Industry

    CERN Document Server

    Kovalev, Sergey; Tarassov, Valery; Snášel, Václav

    2016-01-01

    This volume of Advances in Intelligent Systems and Computing contains papers presented in the main track of IITI 2016, the First International Conference on Intelligent Information Technologies for Industry held in May 16-21 in Sochi, Russia. The conference was jointly co-organized by Rostov State Transport University (Russia) and VŠB – Technical University of Ostrava (Czech Republic) with the participation of Russian Association for Artificial Intelligence (RAAI) and Russian Association for Fuzzy Systems and Soft Computing (RAFSSC). The volume is devoted to practical models and industrial applications related to intelligent information systems. The conference has been a meeting point for researchers and practitioners to enable the implementation of advanced information technologies into various industries. Nevertheless, some theoretical talks concerning the-state-of-the-art in intelligent systems and soft computing are included in the proceedings as well.

  8. 4th International Conference on Computational Collective Intel- ligence Technologies and Applications (ICCCI 2012)

    CERN Document Server

    Trawiński, Bogdan; Katarzyniak, Radosław; Jo, Geun-Sik; Advanced Methods for Computational Collective Intelligence

    2013-01-01

    The book consists of 35 extended chapters which have been selected and invited from the submissions to the 4th International Conference on Computational Collective Intelligence Technologies and Applications (ICCCI 2012) held on November 28-30, 2012 in Ho Chi Minh City, Vietnam. The book is organized into six parts, which are semantic web and ontologies, social networks and e-learning, agent and multiagent systems, data mining methods and applications, soft computing, and optimization and control, respectively. All chapters in the book discuss theoretical and practical issues connected with computational collective intelligence and related technologies. The editors hope that the book can be useful for graduate and Ph.D. students in Computer Science, in particular participants in courses on Soft Computing, Multiagent Systems, and Data Mining. This book can be also useful for researchers working on the concept of computational collective intelligence in artificial populations. It is the hope of the editors that ...

  9. Proceedings of the international specialist meeting on BWR-pressure suppression containment technology. Vol. 1

    International Nuclear Information System (INIS)

    Schultheiss, G.F.

    1981-01-01

    In the frame of R + D-work for BWR-pressure suppression systems the GKSS-Forschungszentrum Geesthacht GmbH organized an international specialist meeting. All important safety relevant aspects of pressure suppression system technology have been included. About 60 experts from USA, Japan, Sweden, Italy, Netherlands and the Federal Republic of Germany participated. They came from licensing authorities, vendors, research centers and universities. In 24 papers they have shown the world-wide present status of theoretical and experimental know-how on pressure suppression system behaviour. In discussions and working groups recommendations for future work have been compiled. (orig.) [de

  10. 9th International Frumkin symposium: Electrochemical technologies and materials for 21st century. Abstracts

    International Nuclear Information System (INIS)

    2010-01-01

    Abstracts of the 9th International Frumkin symposium: Electrochemical technologies and materials for 21st century are presented. The symposium was held 24-29 October 2010 in Moscow. The symposium included the following microsymposiums: Electrical double layer and electrochemical kinetics (from phenomenological to molecular level); New processes, materials and devices for successful electrochemical transformation of energy; Corrosion and protection of materials; General and local corrosion; Electroactive composition materials; Bioelectrochemistry. The Frumkin symposium includes plenary lectures, oral and poster presentations. Official language of the symposium is English [ru

  11. PREFACE: 2nd International Meeting for Researchers in Materials and Plasma Technology

    Science.gov (United States)

    Niño, Ely Dannier V.

    2013-11-01

    These proceedings present the written contributions of the participants of the 2nd International Meeting for Researchers in Materials and Plasma Technology, 2nd IMRMPT, which was held from February 27 to March 2, 2013 at the Pontificia Bolivariana Bucaramanga-UPB and Santander and Industrial - UIS Universities, Bucaramanga, Colombia, organized by research groups from GINTEP-UPB, FITEK-UIS. The IMRMPT, was the second version of biennial meetings that began in 2011. The three-day scientific program of the 2nd IMRMPT consisted in 14 Magisterial Conferences, 42 Oral Presentations and 48 Poster Presentations, with the participation of undergraduate and graduate students, professors, researchers and entrepreneurs from Colombia, Russia, France, Venezuela, Brazil, Uruguay, Argentina, Peru, Mexico, United States, among others. Moreover, the objective of IMRMPT was to bring together national and international researchers in order to establish scientific cooperation in the field of materials science and plasma technology; introduce new techniques of surface treatment of materials to improve properties of metals in terms of the deterioration due to corrosion, hydrogen embrittlement, abrasion, hardness, among others; and establish cooperation agreements between universities and industry. The topics covered in the 2nd IMRMPT include New Materials, Surface Physics, Laser and Hybrid Processes, Characterization of Materials, Thin Films and Nanomaterials, Surface Hardening Processes, Wear and Corrosion / Oxidation, Modeling, Simulation and Diagnostics, Plasma Applications and Technologies, Biomedical Coatings and Surface Treatments, Non Destructive Evaluation and Online Process Control, Surface Modification (Ion Implantation, Ion Nitriding, PVD, CVD). The editors hope that those interested in the are of materials science and plasma technology, enjoy the reading that reflect a wide range of topics. It is a pleasure to thank the sponsors and all the participants and contributors for

  12. 3rd ACIS International Conference on Applied Computing and Information Technology

    CERN Document Server

    2016-01-01

    This edited book presents scientific results of the 3nd International Conference on Applied Computing and Information Technology (ACIT 2015) which was held on July 12-16, 2015 in Okayama, Japan. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. Research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them.

  13. Securing life through technology acceptance: the first six months after transvenous internal cardioverter defibrillator implantation.

    Science.gov (United States)

    Burke, L J

    1996-01-01

    To understand the experience of living with a transvenous internal cardioverter defibrillator (ICD) during the first 6 months after implantation. A grounded theory approach was used to gain an understanding of the antecedents, conditions, and consequences of the core process. Two midwestern community medical centers and patients' homes within a 250-mile radius from the medical centers. Ten women and 14 men between 22 and 78 years of age, who had undergone a new transvenous ICD implantation within the last week. The core process that described the experience of living with a transvenous ICD during the first 6 months after implantation was the process of "securing life through technology acceptance." This core process was characterized by three major categories: choosing life with technology, integrating technology into life, and living life through technology. Nursing interventions related to individualized assessment, education, and counseling are warranted to facilitate patient and family understanding and to plan for the cyclic process involved in integrating a transvenous ICD into their lives. Directions for further research are provided.

  14. 20th International Conference for Students and Young Scientists: Modern Techniques and Technologies (MTT'2014)

    Science.gov (United States)

    2014-10-01

    The active involvement of young researchers in scientific processes and the acquisition of scientific experience by gifted youth currently have a great value for the development of science. One of the research activities of National Research Tomsk Polytechnic University, aimed at the preparing and formation of the next generation of scientists, is the International Conference of Students and Young Scientists ''Modern Techniques and Technologies'', which was held in 2014 for the twentieth time. Great experience in the organization of scientific events has been acquired through years of carrying the conference. There are all the necessary resources for this: a team of organizers - employees of Tomsk Polytechnic University, premises provided with modern office equipment and equipment for demonstration, and leading scientists - professors of TPU, as well as the status of the university as a leading research university in Russia. This way the conference is able to attract world leading scientists for the collaboration. For the previous years the conference proved itself as a major scientific event at international level, which attracts more than 600 students and young scientists from Russia, CIS and other countries. The conference provides oral plenary and section reports. The conference is organized around lectures, where leading Russian and foreign scientists deliver plenary presentations to young audiences. An important indicator of this scientific event is the magnitude of the coverage of scientific fields: energy, heat and power, instrument making, engineering, systems and devices for medical purposes, electromechanics, material science, computer science and control in technical systems, nanotechnologies and nanomaterials, physical methods in science and technology, control and quality management, design and technology of artistic materials processing. The main issues considered by young researchers at the conference were related to the analysis of contemporary

  15. PREFACE: 2nd International Conference on Innovative Materials, Structures and Technologies

    Science.gov (United States)

    Ručevskis, Sandris

    2015-11-01

    The 2nd International Conference on Innovative Materials, Structures and Technologies (IMST 2015) took place in Riga, Latvia from 30th September - 2nd October, 2015. The first event of the conference series, dedicated to the 150th anniversary of the Faculty of Civil Engineering of Riga Technical University, was held in 2013. Following the established tradition, the aim of the conference was to promote and discuss the latest results of industrial and academic research carried out in the following engineering fields: analysis and design of advanced structures and buildings; innovative, ecological and energy efficient building materials; maintenance, inspection and monitoring methods; construction technologies; structural management; sustainable and safe transport infrastructure; and geomatics and geotechnics. The conference provided an excellent opportunity for leading researchers, representatives of the industrial community, engineers, managers and students to share the latest achievements, discuss recent advances and highlight the current challenges. IMST 2015 attracted over 120 scientists from 24 countries. After rigorous reviewing, over 80 technical papers were accepted for publication in the conference proceedings. On behalf of the organizing committee I would like to thank all the speakers, authors, session chairs and reviewers for their efficient and timely effort. The 2nd International Conference on Innovative Materials, Structures and Technologies was organized by the Faculty of Civil Engineering of Riga Technical University with the support of the Latvia State Research Programme under the grant agreement "INNOVATIVE MATERIALS AND SMART TECHNOLOGIES FOR ENVIRONMENTAL SAFETY, IMATEH". I would like to express sincere gratitude to Juris Smirnovs, Dean of the Faculty of Civil Engineering, and Andris Chate, manager of the Latvia State Research Programme. Finally, I would like to thank all those who helped to make this event happen. Special thanks go to Diana

  16. DEVELOPING A TECHNOLOGY-BASED BUSINESS STRATEGY FOR THE INTERNATIONAL BUSINESS OF TELKOM SA

    Directory of Open Access Journals (Sweden)

    M. John

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: This study was aimed at developing a technology-based business strategy for Telkom’s international business. Deregulation, competition and demand for converging voice, data and video in the telecommunication market were the driving forces behind this study. Without a proper strategy, Telkom will not be able to withstand the new competition. As the initial step in strategy formulation, Telkom’s strategic goals were identified. A SWOT analysis was conducted and a strategy formulation map was developed. A technology balance sheet and S-curve models were developed to analyse the current products and technologies. It become evident through the research that there is a high potential for business expansion into Africa and Telkom has sufficient capabilities to support this. The implementation of voice over Internet protocol technology will enable Telkom to deliver international services at competitive rates. The study concluded by developing a technology strategy for Telkom’s international business. Recommendations are put forward and future research gaps are identified.

    AFRIKAANSE OPSOMMING: Die doel van hierdie studie was om ‘n tegnologie-gebaseerde besigheidstrategie vir Telkom se internasionale besigheid te ontwikkel. Deregulering, mededinging en die vraag na konvergensie van stem, data en video in die telekommunikasiemark was die dryfkragte agter hierdie studie. Sonder ‘n behoorlike strategie sal Telkom nie teen die nuwe mededinging kan staande bly nie. As eerste stap in die formulering van ‘n strategie, is Telkom se doelwitte geïdentifiseer. ‘n SWOT-analise is uitgevoer en ‘n strategieformuleringskaart is ontwikkel. ‘n Tegnologiebalansstaat en S-krommemodelle is ontwikkel om die bestaande produkte en tegnologieë te ontleed. Hierdie navorsing het aangetoon dat daar ‘n hoë potensiaal vir uitbreiding van Telkom se besigheid in Afrika bestaan en dat Telkom genoegsame vermoëns besit om dit te

  17. PREFACE: 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies

    Science.gov (United States)

    Shuja Syed, Ahmed

    2013-12-01

    The 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies (ICSICCST-2013), took place in Karachi, Pakistan, from 24-26 June 2013. It was organized by Indus University, Karachi, in collaboration with HEJ Research Institute of Chemistry, University of Karachi, Karachi. More than 80 abstracts were submitted to the conference and were double blind-reviewed by an international scientific committee. The topics of the Conference were: Video, Image & Voice Sensing Sensing for Industry, Environment, and Health Automation and Controls Laser Sensors and Systems Displays for Innovative Applications Emerging Technologies Unmanned, Robotic, and Layered Systems Sensing for Defense, Homeland Security, and Law Enforcement The title of the conference, 'Sensing for Industry, Control, Communication & Security Technologies' is very apt in capturing the main issues facing the industry of Pakistan and the world. We believe the sensing industry, particularly in Pakistan, is currently at a critical juncture of its development. The future of the industry will depend on how the industry players choose to respond to the challenge of global competition and opportunities arising from strong growth in the Asian region for which we are pleased to note that the conference covered a comprehensive spectrum of issues with an international perspective. This will certainly assist industry players to make informed decisions in shaping the future of the industry. The conference gathered qualified researchers from developed countries like USA, UK, Sweden, Saudi Arabia, China, South Korea and Malaysia etc whose expertise resulting from the research can be drawn upon to build an exploitable area of new technology that has potential Defense, Homeland Security, and Military applicability. More than 250 researchers/students attended the event and made the event great success as the turnout was 100%. An exceptional line-up of speakers spoke at the occasion. We want

  18. Analysis of the international environment for the national nuclear technology development in the post-coldwar era

    International Nuclear Information System (INIS)

    Yang, Maeng Ho; Kim, Hwa Sup; Kim, Ji Whan; Lee, Dong Jin; Kim, Jong Sook; Kim, Hyun Joon; Yoon, Young Woo; Ham, Chul Hoon; Cho, Suck Hong

    1992-12-01

    The main objective of this study is to suggest future policy directions of national nuclear technology development and to define the role of nuclear power in the post-coldwar era. This study first reviews how the collapse of USSR have exerted subsequent effects on the international nuclear industry and analyses the efforts of the multinational nuclear enterprises to obtain technological, competitiveness and to expand the share in the international nuclear market in order to compete the economical and technological superiority. Finally, this study analyses scenarios for the global environmental regulations which may be imposed over internationally in the near future. This study suggests; firstly, increasing investment on science and technology, secondly, diversifying international cooperation, thirdly, rearranging and strengthening a national system for information collecting and analysis, fourthly, making up infrastructure to expand the role of nuclear power, fifthly, expanding the applications of nuclear energy including district heating, etc. (Author)

  19. 7th International Topical Meeting on High Temperature Reactor Technology: The modular HTR is advancing towards reality. Papers and Presentations

    International Nuclear Information System (INIS)

    2014-01-01

    HTR2014 aimed at providing an international platform for researchers, engineers and industrial professionals to share their innovative ideas, valuable experience and recent progresses on high temperature gas-cooled reactor (HTR) and its application technologies.

  20. Taking the (right?) fork in the road: Canada's two-track approach to domestic and international science and technology

    OpenAIRE

    Paul Dufour

    2002-01-01

    Canada's approach to developing a strategic capability of integrating science and technology into its international trade and foreign relations agenda has remained largely stagnant, while its domestic strategy for S&T has flowered. Canada is not perceived by the global industry and investment community to have a strong industrial R&D capacity: this may be hindering ready access to emerging international technology. Nevertheless, the quality of Canada's academic and industrial research is wide...

  1. Assessing the quality of decision support technologies using the International Patient Decision Aid Standards instrument (IPDASi.

    Directory of Open Access Journals (Sweden)

    Glyn Elwyn

    Full Text Available To describe the development, validation and inter-rater reliability of an instrument to measure the quality of patient decision support technologies (decision aids.Scale development study, involving construct, item and scale development, validation and reliability testing.There has been increasing use of decision support technologies--adjuncts to the discussions clinicians have with patients about difficult decisions. A global interest in developing these interventions exists among both for-profit and not-for-profit organisations. It is therefore essential to have internationally accepted standards to assess the quality of their development, process, content, potential bias and method of field testing and evaluation.Scale development study, involving construct, item and scale development, validation and reliability testing.Twenty-five researcher-members of the International Patient Decision Aid Standards Collaboration worked together to develop the instrument (IPDASi. In the fourth Stage (reliability study, eight raters assessed thirty randomly selected decision support technologies.IPDASi measures quality in 10 dimensions, using 47 items, and provides an overall quality score (scaled from 0 to 100 for each intervention. Overall IPDASi scores ranged from 33 to 82 across the decision support technologies sampled (n = 30, enabling discrimination. The inter-rater intraclass correlation for the overall quality score was 0.80. Correlations of dimension scores with the overall score were all positive (0.31 to 0.68. Cronbach's alpha values for the 8 raters ranged from 0.72 to 0.93. Cronbach's alphas based on the dimension means ranged from 0.50 to 0.81, indicating that the dimensions, although well correlated, measure different aspects of decision support technology quality. A short version (19 items was also developed that had very similar mean scores to IPDASi and high correlation between short score and overall score 0.87 (CI 0.79 to 0.92.This work

  2. Renewable Energy Technologies for Decentralised Rural Electricity Services. Report from an International Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Kjellstroem, Bjoern; Arvidson, Anders; Forslund, Helena; Martinac, Ivo (eds.)

    2005-02-01

    demands with low load factor. Mini-hydro and wind systems can serve a wide load range, but require specific favourable on-site conditions. Use of biomass fuels in a steam power plant is the obvious solution for power demands above 1 MW and a high load factor, when the necessary amounts of biomass fuels can be supplied in a sustainable way. For smaller power demands (down to 15 kW), biomass gasification and use of the gas as fuel in an internal combustion engine is often the most realistic option. Both technologies are commercially available. Better fuel flexibility and reduced needs for service and maintenance are possible improvements of the biomass gasification process that would make this option more attractive in comparison with the diesel generator. For wind generators and PV, energy storage is necessary in most applications. The development of storage systems with lower life-cycle costs would make these systems more competitive. Hybrid systems with diesel generators are an option that deserves more attention. Hybrid generation can also be cost-effective when biomass is used as fuel. Diesel generators can then be used for peak load supply and as reserve capacity. Recommendations to donor agencies: Donors should support development of national energy policies which include support to rural electrification using renewable energy technologies where this is economically justified. The economic evaluations should include consideration of local environmental costs and additional benefits that utilisation of renewable energy may result in, such as improved supply reliability, reduced vulnerability to international price fluctuations and the creation of local employment opportunities. The expected impacts on rural development and poverty alleviation should be the main basis for selection of rural electrification projects for financing. This means that the possibility of finding productive uses of the electricity should be very important for project selection. Donors should

  3. Report of the 17th international workshop on nuclear safety and simulation technology (IWNSST17)

    International Nuclear Information System (INIS)

    Yoshikawa, Hidekazu

    2014-01-01

    The 17th International Workshop on Nuclear Safety and Simulation Technology (IWNSST17) was held in January 21, 2014 at Kyoto University, in Kyoto, Japan. This one-day workshop was motivated to exploit advanced safety researches for nuclear power plant (NPP) , by a unique synergetic collaboration of basically two different disciplines: material science and systems sciences. There were ten invited presentations at the ISSNP2013, and the subject of the presentations ranges from (1) material corrosion issue of NPP components, (2) application of augmented reality technology for NPP decommission, (3) functional modeling method for plant control system, (4) intrinsic understanding of Fukushima Daiichi accident phenomena based on simple physical model, (5) system reliability evaluation method for PWR safety system, (6) automatic control system design for small modular reactor, and (7) validation of computerized human-machine interface and digital I and C for PWR plant. This article provides the overview of the IWNSST17 with giving condensed summaries of all invited presentations given by international experts. (author)

  4. A Study on intensifying efficiency for international collaborative development of Advanced Nuclear Energy Technology

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Dohee; Park, Seongwon; Chang, Moonhee

    2013-08-15

    All the countries of the world are promoting the use of atomic energy to provide against high oil prices, climatic changes, and energy security initiative. A domestic and foreign environment for nuclear energy is changing rapidly and 13 leading countries including Korea are trying to develop advanced technologies on Gen IV nuclear energy system through Gen IV International Forum (GIF). To enhance the effectiveness of the future nuclear energy system development plan, a strategic approach is necessary for GIF program and the connection process with the 4th Nuclear Energy Promotion Program and Nuclear Energy R and D Medium and Long Term 5 year Plan for 2012 ∼ 2016 needs to be prepared. This study was to analyze the global nuclear trends of 2012 and the status of GIF program which is international cooperation activities. Also we examined the domestic R and D status of future nuclear energy systems for developing core technology and commercialization of Gen-IV nuclear energy system. A successful performance of this project enables the effective national cooperation with GIF and promotes the public acceptance by suggesting the technical alternatives for the nuclear safety and the spent fuel management.

  5. Cooperation and Coordination in an International Intervention: The Use of Information and Communication Technologies in Kosovo

    Directory of Open Access Journals (Sweden)

    Anne Holohan

    2003-01-01

    Full Text Available In international interventions that encompass peacekeeping, democratic transition, and institution building, oneorganization cannot do it all. In Kosovo several organizations—the United Nations (UN, nongovernmentalorganizations (NGOs, the Organization for Security and Cooperation in Europe (OSCE, the militaries (KFOR, andan international police force—formed a temporary network organization, the United Nations Mission in Kosovo(UNMIK, in which they worked together cooperatively at every level to pursue the goals of the mission. Thisresearch, based on ªeldwork in Kosovo with all the organizations in UNMIK, investigates how well the use ofinformation and communications technologies (ICTs reºected the organizational structure and design of themission. What does this experience tell us about the use of ICTs in an interorganizational setting? What does it tellus about information transfer and knowledge sharing in a temporary network organization that comprisesorganizations of diverse structure and culture? The information and communication infrastructure of UNMIK isexamined to discover how well it met the organizational requirements of both the participating hierarchies in themission and the emerging network organization. The question in Kosovo was whether the introduction and use ofnew technologies helped the organizations move from a hierarchical structure and culture to a more collaborativeone.

  6. Risks and Benefits with International Technology Transfer from Brazil to Angola

    Directory of Open Access Journals (Sweden)

    Rafael Vaisman

    2013-12-01

    Full Text Available Thanks to the transfer of technology from Brazil, Angola is entering the sucroalcooleiro sector with multiple aims. These include creating jobs in rural areas, diversifying the energy mix and boosting exports. Angola is one of the countries that has envisioned international technology transfer as a strategy to increase participation in the global market, while decreasing its dependence on sugar imports. While the production of ethanol and sugar can bring about some benefits, technology transfer in this area is not without risks. It needs to be carefully crafted and executed, especially in accordance with the principles of sustainable development, which is by the government plan of Angola to include, rather than exclude, the rural poor. This study shows that stakeholders presented different opinions in relation to Biocom and sustainable development. The main reason is linked to the distinction between global, national and local levels. On the global level, ITT and Biocom are seen as alternative renewable sources of energy (ethanol to fossil fuels, on the local level there is a concern with the socio-environmental issues which local communities might face, indeed ITT and Biocom are perceived as a risk in case locals  lose their lands and do not receive compensation. On the national level, while there is the expectancy of employment, infrastructure development and attraction of investments in the country, there is a lack of trust in governance by Angolan civil society; which argues that Angolan government and enterprises do not encourage public participation nor allows it to happen. Technology transfer is perceived as a business and geopolitical strategy driven by private and state interests, undermining environmental and social costs. On the other hand technology transfer is seen as a key to foster economic opportunities towards sustainable development.

  7. The Growing Reliance of Ontario Colleges of Applied Arts and Technology on Educational Agents for the Recruitment of International Students

    Science.gov (United States)

    Legusov, Oleg

    2017-01-01

    The number of international students seeking educational opportunities at Ontario colleges of applied arts and technology (CAATs) has grown at an unprecedented rate in the past 10 years. It appears that as the number of the international college students has increased, colleges have also been relying more heavily on educational agents to recruit…

  8. 8th International Conference on Computer Science and its Applications (CSA-16) and the 11st International Conference on Ubiquitous Information Technologies and Applications (CUTE 2016)

    CERN Document Server

    Pan, Yi; Yi, Gangman; Loia, Vincenzo

    2017-01-01

    This book presents the combined proceedings of the 8th International Conference on Computer Science and its Applications (CSA-16) and the 11st International Conference on Ubiquitous Information Technologies and Applications (CUTE 2016), both held in Bangkok, Thailand, December 19 - 21, 2016. The aim of these two meetings was to promote discussion and interaction among academics, researchers and professionals in the field of ubiquitous computing technologies. These proceedings reflect the state-of-the-art in the development of computational methods, involving theory, algorithm, numerical simulation, error and uncertainty analysis and novel application of new processing techniques in engineering, science, and other disciplines related to ubiquitous computing.

  9. International conference on information and communication technologies: From theory to applications, Damascus (SY), 24-28 April 2006, V. 1

    International Nuclear Information System (INIS)

    2006-01-01

    This publication includes the papers presented at the International conference on information and communication technologies: From theory to applications held in Damascus (Syria) from 24-28 April 2006. This proceeding is published in two volumes and aims to provide an outstanding opportunity for both academic and industrial communities alike to address new trends and challenges, emerging technologies and progress in standards on topics relevant to today's fast moving areas of information and communication technologies. The papers cover state-of-the-art technologies, theoretical concepts, standards, products implementation, ongoing research projects and innovation applications of the IC technologies use

  10. History of International Workshop on Mini-Micro- and Nano- Dosimetry (MMND) and Innovation Technologies in Radiation Oncology (ITRO)

    Science.gov (United States)

    Rosenfeld, Anatoly B.; Zaider, Marco; Yamada, Josh; Zelefsky, Michael J.

    2017-01-01

    The biannual MMND (former MMD) - IPCT workshops was founded in collaboration between the Centre for Medical Radiation Physics, University of Wollongong and the Memorial Sloan Kettering Cancer Center (MSKCC) in 2001 and has become an important international multidisciplinary forum for the discussion of advanced quality assurance (QA) dosimetry technology for radiation therapy and space science, as well as advanced technologies for clinical cancer treatment.

  11. Arts and Technology:Second International Conference, ArtsIT 2011, Esbjerg Denmark, December 2011, Revised Selected Papers

    OpenAIRE

    2012-01-01

    This book constitutes the thoroughly refereed post-conference proceedings of the Second International Conference on Arts and Technology, ArtsIT 2011, which was held in December 2011 in Esbjerg, Denmark. The 19 revised full papers and the two poster papers cover various topics such as Interaction and Art, Music and Performance, and Digital Technology.

  12. 77 FR 5864 - In the Matter of Along Mobile Technologies, Inc., and China Yingxia International, Inc., Order of...

    Science.gov (United States)

    2012-02-06

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION In the Matter of Along Mobile Technologies, Inc., and China Yingxia International, Inc., Order of... lack of current and accurate information concerning the securities of Along Mobile Technologies, Inc...

  13. Assessment of Technology Readiness Level of a Carbon Dioxide Reduction Assembly (CRA) for use on International Space Station

    Science.gov (United States)

    Murdoch, Karen; Smith, Fred; Perry, Jay; Green, Steve

    2004-01-01

    When technologies are traded for incorporation into vehicle systems to support a specific mission scenario, they are often assessed in terms of Technology Readiness Level (TRL). TRL is based on three major categories of Core Technology Components, Ancillary Hardware and System Maturity, and Control and Control Integration. This paper describes the Technology Readiness Level assessment of the Carbon Dioxide Reduction Assembly (CRA) for use on the International Space Station. A team comprising of the NASA Johnson Space Center, Marshall Space Flight Center, Southwest Research Institute and Hamilton Sundstrand Space Systems International have been working on various aspects of the CRA to bring its TRL from 4/5 up to 6. This paper describes the work currently being done in the three major categories. Specific details are given on technology development of the Core Technology Components including the reactor, phase separator and CO2 compressor.

  14. The Impact of Information and Communication Technology on Internal Control’s Prevention and Detection of Fraud

    OpenAIRE

    Abiola, James

    2013-01-01

    This study explores the Impact of Information and Communication Technology (ICT) on internal control effectiveness in preventing and detecting fraud within the financial sector of a developing economy – Nigeria. Using a triangulation of questionnaire and interview techniques to investigate the internal control activities of Nigerian Internal Auditors in relation to their use of ICT in fraud prevention and detection, the study made use of cross-tabulations, correlation coefficients and one-way...

  15. Technologically enhanced natural radiation (TENR II). Proceedings of an international symposium

    International Nuclear Information System (INIS)

    2002-02-01

    Natural radiation is ubiquitous. In recent decades, there has been a developing interest in fully documenting exposure of human beings to radiation of natural origin. Radiation experts have recognized that natural sources of radiation can cause exposure of members of the general public and workers to levels that warrant consideration of whether controls should be applied. The second International Symposium on Technologically Enhanced Natural Radiation (TENR II) was held in Rio de Janeiro from 12 to 17 September 1999. The objective of the symposium was to provide a forum for the international exchange of information on the scientific and technical aspects of those components of exposure to natural radiation that warrant consideration. These components were examined under the headings: the technological enhancement of natural radiation in mining and non-nuclear industries; radon indoors and outdoors; mobility and transfer of natural radionuclides; natural radiation and health effects; analytical techniques and methodologies; the remediation of contaminated sites; and regulatory and legal aspects. The symposium found that exposures to natural sources of radiation should be considered from the point of view of their amenability to control. This approach is reflected in the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS) and the associated IAEA documents on occupational exposure and rehabilitation of contaminated lands. The concepts of exclusion and intervention are particularly relevant to the amenability to control of natural sources of radiation. Indeed, the BSS specify that any exposure whose magnitude is essentially unamenable to control through the requirements of the BSS is out of the scope of the BSS. The BSS further indicate that protective or remedial actions shall be undertaken whenever they are justified in terms of the benefit to be obtained. Following their deliberations, the

  16. Managing Nuclear Knowledge: IAEA Activities and International Coordination. Asian Network for Education in Nuclear Technology (ANENT)

    International Nuclear Information System (INIS)

    2007-07-01

    The important role which the International Atomic Energy Agency (IAEA) plays in assisting Member States in the preservation and enhancement of nuclear knowledge and in facilitating international collaboration in this area has been recognized by the General Conference of the International Atomic Energy Agency in resolutions GC(46)/RES/11B, GC(47)/RES/10B, GC(48)/RES/13 and GC(50)/RES/13. The IAEA continues to support the enhancement and stabilization of nuclear education and training with the objective of securing the availability of qualified human resources for the nuclear sector. Its most important approaches are networking regional educational institutions and fostering cooperation to develop harmonized curricula, prepare and disseminate teaching materials. The Asian Network for Education in Nuclear Technology (ANENT), established by the IAEA in 2004, became operational in 2005. An ANENT website has been set up and is being expanded, such as developing a long-distance learning platform. Also, a reference curriculum for nuclear engineering is being developed with the cooperation of external partners.This booklet summarizes the main activities being carried out by the IAEA with regard to the Asian Network for Education in Nuclear Technology (ANENT) and other related activities including those completed during the period 2002–2005. It briefly describes the background information on the events leading to the formation of the ANENT; the terms of reference formulated at the second Coordination Committee meeting held in Vietnam, October 2005; and objectives, strategy and other institutional and managerial policies reaffirmed by the members. CD-ROM attached to the printed booklet containing nearly all of the background material in full text, including policy level papers, reports, presentations made by Member States, and meeting summaries

  17. EVALUATION OF PATIENT AND PUBLIC INVOLVEMENT INITIATIVES IN HEALTH TECHNOLOGY ASSESSMENT: A SURVEY OF INTERNATIONAL AGENCIES.

    Science.gov (United States)

    Weeks, Laura; Polisena, Julie; Scott, Anna Mae; Holtorf, Anke-Peggy; Staniszewska, Sophie; Facey, Karen

    2017-01-01

    Although there is increased awareness of patient and public involvement (PPI) among health technology assessment (HTA) organizations, evaluations of PPI initiatives are relatively scarce. Our objective as members of Health Technology Assessment International's (HTAi's) Patient and Citizen Involvement Group (PCIG) was to advance understanding of the range of evaluation strategies adopted by HTA organizations and their potential usefulness. In March 2016, a survey was sent to fifty-four HTA organizations through the International Network of Agencies for Health Technology Assessment (INAHTA) and contacts of members of HTAi's PCIG. Respondents were asked about their organizational structure; how patients and members of the public are involved; whether and how PPI initiatives have been evaluated, and, if so, which facilitators and challenges to evaluation were found and how results were used and disseminated. Fifteen (n = 15) programs from twelve countries responded (response rate 27.8 percent) that involved patients (14/15) and members of the public (10/15) in HTA activities. Seven programs evaluated their PPI activities, including participant satisfaction (5/7), process (5/7) and impact evaluations (4/7). Evaluation results were used to improve PPI activities, identify education and training needs, and direct strategic priorities. Facilitators and challenges revolved around the need for stakeholder buy-in, sufficient resources, senior leadership, and including patients in evaluations. A small but diverse set of HTA organizations evaluate their PPI activities using a range of strategies that reflect the range of rationales and approaches to PPI in HTA. It will be important for HTA organizations to draw on evaluation theories and methods.

  18. Proceedings of the third IEA international workshop on beryllium technology for fusion

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, Hiroshi; Okamoto, Makoto [eds.

    1998-01-01

    This report is the Proceedings of the Third International Energy Agency International Workshop on Beryllium Technology for Fusion. The workshop was held on October 22-24, 1997, at the Sangyou Kaikan in Mito City with 68 participants who attended from the Europe, the Russian Federation, the Kazakstan, the United States and Japan. The topics for papers were arranged into 9 sessions; beryllium applications for ITER, production and characterization, chemical compatibility and corrosion, forming and joining, plasma/tritium interactions, beryllium coating, first wall applications, neutron irradiation effects, health and safety. To utilize beryllium in the pebble type blanket, a series of discussions were intensified in multiple view points such as the swelling, He/T release from beryllium pebble irradiated up to high He content, effective thermal conductivity, tritium permeation and coating, and fabrication cost, and so on. As the plasma facing material, life time of beryllium and coated beryllium, dust and particle production, joining, waste treatment, mechanical properties and deformation by swelling were discussed as important issues. Especially, it was recognized throughout the discussions that the comparative study by the different researchers should be carried out to establish the reliability of the data reported in the workshop and in others. To enhance the comparative study, the world wide collaboration for the relative evaluation of the beryllium was proposed by the International Organization Committee and the proposal was approved by all of the participants. The 45 of the presented papers are indexed individually. (J.P.N.)

  19. Advanced Manufacturing Technologies and Green Innovation: The Role of Internal Environmental Collaboration

    Directory of Open Access Journals (Sweden)

    Ting Kong

    2016-10-01

    Full Text Available Green innovation has been deemed a key corporate capability to deal with environmental issues. The usage of advanced manufacturing technologies (AMT provides important resources and knowledge for firms’ green innovation. Drawing on a resources-based approach, this study contributes to the existing literature by examining how the adoption of specific types of AMT (process, design, and planning influences two dimensions of green innovation (green product innovation and green process innovation. In particular, we explore these relationships through internal environmental collaboration. Based on data collected from 198 Chinese manufacturing firms, we found that process, design, and planning AMT can contribute to both green products and process innovation. Moreover, the findings confirm the significant mediating role of internal environmental collaboration in this relationship. Specifically, internal environmental collaboration mediates the relationship between process AMT and green product innovation as well as the relationship between design AMT and two dimensions of green innovation; it also partially mediates the relationship between process AMT and green process innovation as well as the relationship between planning AMT and two dimensions of green innovation. These findings provide novel insights into how manufacturing firms can use various types of AMT to enhance their green innovation.

  20. Proceedings of The Twentieth International Symposium on Space Technology and Science. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-31

    The 20th international symposium on space technology and science was held in Nagaragawa city, Gifu prefecture on May 19-25, 1996, and 401 papers were made public. Out of those, 112 papers were summed up as Volume 2 following the previous Volume 1. As to space transportation, the paper included reports titled as follows: Conceptual study of H-IIA rocket (upgraded H-II rocket); Test flight of the launch vehicle; International cooperation in space transportation; etc. Concerning microgravity science, Recent advances in microgravity research; Use of microgravity environment to investigate the effect of magnetic field on flame shape; etc. Relating to satellite communications and broadcasting, `Project GENESYS`: CRL`s R and D project for realizing high data rate satellite communications networks; The Astrolink {sup TM/SM} system; etc. Besides, the paper contained reports on the following fields: lunar and planetary missions and utilization, space science and balloons, earth observations, life science and human presence, international cooperation and space environment, etc

  1. International technology exchange in support of the Defense Waste Processing Facility wasteform production

    International Nuclear Information System (INIS)

    Kitchen, B.G.

    1989-01-01

    The nearly completed Defense Waste Processing Facility (DWPF) is a Department of Energy (DOE) facility at the Savannah River Site that is designed to immobilize defense high level radioactive waste (HLW) by vitrification in borosilicate glass and containment in stainless steel canisters suitable for storage in the future DOE HLW repository. The DWPF is expected to start cold operation later this year (1990), and will be the first full scale vitrification facility operating in the United States, and the largest in the world. The DOE has been coordinating technology transfer and exchange on issues relating to HLW treatment and disposal through bi-lateral agreements with several nations. For the nearly fifteen years of the vitrification program at Savannah River Laboratory, over two hundred exchanges have been conducted with a dozen international agencies involving about five-hundred foreign national specialists. These international exchanges have been beneficial to the DOE's waste management efforts through confirmation of the choice of the waste form, enhanced understanding of melter operating phenomena, support for paths forward in political/regulatory arenas, confirmation of costs for waste form compliance programs, and establishing the need for enhancements of melter facility designs. This paper will compare designs and schedules of the international vitrification programs, and will discuss technical areas where the exchanges have provided data that have confirmed and aided US research and development efforts, impacted the design of the DWPF and guided the planning for regulatory interaction and product acceptance

  2. The Master's program in Advanced Optical Technologies: an interdisciplinary, international and individual approach

    Science.gov (United States)

    Großmann, Jürgen; Schmauss, Bernhard

    2017-08-01

    The Master's Program in Advanced Optical Technologies (MAOT) was established at the Friedrich-Alexander Universität Erlangen-Nürnberg in 2007 as part of the Elite Network of Bavaria (ENB), an initiative by the Bavarian State Government comprising about 40 elite Master's programs and doctoral programs. MAOT can be studied after a Bachelor in physics or an engineering subject. The Master's program realizes an innovative concept combining three core elements: (1) Interdisciplinarity: The program integrates courses and researchers from five engineering subjects and from physics. The degree of interdisciplinarity goes far beyond traditional programs. (2) Internationality: The program is taught entirely in English and special support is given to international students. (3). Individuality: The course curriculum was adapted at several points based on the experience in the initial years. The same is true for the way in which international students are supported and the type of support they need. The students are given an unusually high degree of freedom to develop an individual curriculum and to pursue research projects. Crucial experience and lessons learned are: (1) Lecturers and researchers have to be coordinated and the perspectives of the different disciplines have to be integrated within one program. Students must be guided in order to deal with the demands and challenges of the different disciplines. (2) International students need support with settling in Germany and with learning and working in a German cultural environment. They need support with administrative issues. Furthermore, they need to analyze and understand cultural differences and how they impact on the cooperation between lecturers and students and on the work in research groups. (3) Students must be helped to develop their own curriculum. They must learn how to combine their first-degree qualification with the specialized qualification which they gain after completing their Master's program. They

  3. PREFACE: The 8th China International NanoScience and Technology Symposium

    Science.gov (United States)

    Cong, Hailin

    2009-09-01

    The 8th China International NanoScience and Technology Symposium, Xiangtan (2009) - Nano-products Exposition, sponsored by Chinese Society of Miro-nanoTechnology and IEEE Nanotechnology Council, etc will be held on 23-27 October 2009 in Xiangtan, China. This symposium is held in order to promote the technology for the development of micro- and nano-scale, cross-scale integration, to share new micro/nano technologies, to exchange information and knowledge over all fields and promote the industrialization and development of nanotechnology. This is a leading professional and traditional conference with at least 400 participants every year. Famous experts, professors and government officials at home and abroad will give lectures during the symposium, which provides a good platform for delegates to discover the latest developments and dynamics of nanotechnology. Researchers, teachers and students in colleges, and technical personnel in the industrial community are welcome to contribute and actively participate in the symposium. In our last symposium held in 2008, over 600 participants from all over the world attended, and we received over 570 abstract and paper submissions for the proceedings published in different languages in famous professional journals. And this year, we have already received over 400 submissions. After strict peer review, 60 of them are published in this volume of Journal of Physics: Conference Series. We are confident that the event will be even more successful this year. Consequently, the organizing committee and proceedings editorial committee would like to thank our colleagues at the IOP Publishing, the invited speakers, our sponsors and all the delegates for their great contributions in this conference. Hailin Cong Vice Chair of the proceedings editorial committee

  4. International

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    This rubric reports on 10 short notes about international economical facts about nuclear power: Electricite de France (EdF) and its assistance and management contracts with Eastern Europe countries (Poland, Hungary, Bulgaria); Transnuclear Inc. company (a 100% Cogema daughter company) acquired the US Vectra Technologies company; the construction of the Khumo nuclear power plant in Northern Korea plays in favour of the reconciliation between Northern and Southern Korea; the delivery of two VVER 1000 Russian reactors to China; the enforcement of the cooperation agreement between Euratom and Argentina; Japan requested for the financing of a Russian fast breeder reactor; Russia has planned to sell a floating barge-type nuclear power plant to Indonesia; the control of the Swedish reactor vessels of Sydkraft AB company committed to Tractebel (Belgium); the renewal of the nuclear cooperation agreement between Swiss and USA; the call for bids from the Turkish TEAS electric power company for the building of the Akkuyu nuclear power plant answered by three candidates: Atomic Energy of Canada Limited (AECL), Westinghouse (US) and the French-German NPI company. (J.S.)

  5. International Development Partnerships and Diffusion of Renewable Energy Technologies in Developing Countries: Cases in Latin America

    Science.gov (United States)

    Platonova, Inna

    Access to energy is vital for sustainable development and poverty alleviation, yet billions of people in developing countries continue to suffer from constant exposure to open fires and dangerous fuels, such as kerosene. Renewable energy technologies are being acknowledged as suitable solutions for remote rural communities in much of the developing world and international development non-governmental organizations (NGOs) increasingly play important roles in the diffusion of these technologies via development partnerships. While these partnerships are widely promoted, many questions related to their functioning and effectiveness remain open. To advance the theory and practice, this interdisciplinary exploratory research provides in-depth insights into the nature of international NGO-driven development partnerships in rural renewable energy and their effectiveness based on the case studies in Talamanca, Costa Rica and Cajamarca, Peru. The analysis of the nature of development partnerships shows that partnerships in the case studies differ in structure, size and diversity of actors due to differentiation in the implementation strategies, technological complexities, institutional and contextual factors. A multi-theoretical approach is presented to explain the multiple drivers of the studied development partnerships. The research highlights partnership constraints related to the provision of rural renewable energy, the organizational type and institutional environments. Based on the case studies this research puts forward theoretical propositions regarding the factors that affect the effectiveness of the partnerships. In terms of the partnership dynamics dimension, several key factors of success are confirmed from the existing literature, namely shared values and goals, complementary expertise and capacities, confidence and trust, clear roles and responsibilities, effective communication. Additional factors identified are personality match and continuity of staff. In

  6. Advanced clean coal technology international symposium 2001. Current status of high efficiency coal utilization technology and coal ash utilization

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    Papers are presented under the following session headings: current status of coal utilization technology; movement for environmental control in the USA, EU and Japan; and coal combustion products utilization technologies.

  7. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - ALBANY INTERNATIONAL CORP. INDUSTRIAL PROCESS TECHNOLOGIES PRIMATEX PLUS I FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

  8. EU's forest fuel resources, energy technology market and international bioenergy trade

    International Nuclear Information System (INIS)

    Asikainen, A.; Laitila, J.; Parikka, H.

    2006-01-01

    The aim of the project is to provide for the Finnish bioenergy technology, machine and appliance manufactures information about forest fuel resources in the EU and international bioenergy trade mechanisms. The projects results act as an instrument for market potential assessments and provide information to the local energy producer about biomass as an energy source. The possibilities to use forest chips in CHP and heating plants will be investigated in the case studies. Total number of case studies will be 3-4, and they will mainly be located in Eastern Europe, where also large forest resources and utilisation potential are found. Case studies include three main tasks: 1) Assessment of forest fuel resources around the CHP or heating plant. 2) Forest fuel procurement cost study and 3) Study on the economics forest fuel based energy production. The project will be carried out as cooperation between Finnish research institutes and companies, and local actors. First case study was carried out at Poland. (orig.)

  9. 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications

    CERN Document Server

    Kacprzyk, Janusz; Ören, Tuncer; Filipe, Joaquim

    2016-01-01

    The present book includes a set of selected extended papers from the 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2015), held in Colmar, France, from 21 to 23 July 2015. The conference brought together researchers, engineers and practitioners interested in methodologies and applications of modeling and simulation. New and innovative solutions are reported in this book. SIMULTECH 2015 received 102 submissions, from 36 countries, in all continents. After a double blind paper review performed by the Program Committee, 19% were accepted as full papers and thus selected for oral presentation. Additional papers were accepted as short papers and posters. A further selection was made after the Conference, based also on the assessment of presentation quality and audience interest, so that this book includes the extended and revised versions of the very best papers of SIMULTECH 2015. Commitment to high quality standards is a major concern of SIMULTECH t...

  10. 2014 International Conference on Simulation and Modeling Methodologies, Technologies and Applications

    CERN Document Server

    Ören, Tuncer; Kacprzyk, Janusz; Filipe, Joaquim

    2015-01-01

    The present book includes a set of selected extended papers from the 4th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2014), held in Vienna, Austria, from 28 to 30 August 2014. The conference brought together researchers, engineers and practitioners interested in methodologies and applications of modeling and simulation. New and innovative solutions are reported in this book. SIMULTECH 2014 received 167 submissions, from 45 countries, in all continents. After a double blind paper review performed by the Program Committee, 23% were accepted as full papers and thus selected for oral presentation. Additional papers were accepted as short papers and posters. A further selection was made after the Conference, based also on the assessment of presentation quality and audience interest, so that this book includes the extended and revised versions of the very best papers of SIMULTECH 2014. Commitment to high quality standards is a major concern of SIMULTEC...

  11. Life as a Mather Intern at the Committee on Science, Space, and Technology

    Science.gov (United States)

    Stankus, Katherine

    2014-03-01

    The AIP Mather Public Policy Internship, sponsored by Nobel Laureate Dr. John Mather and facilitated by the American Institute of Physics Society of Physics Students Summer Internship Program, was designed to help undergraduate physics students explore the interface between science and policy. As a Mather Public Policy Intern in 2013, I worked for the U.S. House of Representatives Committee on Science, Space, and Technology where I conducted written research and analyses for staff members, prepared background materials and reports, and assisted at hearings and markups. In addition to my internship duties I also had the opportunity to meet several different representatives, go to various receptions and luncheons held on the Hill, and meet some influential people in society. During this talk I will discuss my experience and how it helped further my interest in doing analytical work and gave me exposure to public policy issues at the national level. AIP Society of Physics Students.

  12. Proceedings of the Twentieth International Symposium on Space Technology and Science. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-31

    The 20th International Symposium on Space Technology and Science was held in Japan on May 19-25, 1996, and a lot of papers were made public. This proceedings has 252 papers of all the papers read in the symposium including the following: Computational fluid dynamics in the design of M-V rocket motors in the propulsion field; Joint structures of carbon-carbon composites in the field of materials and structures; On-orbit attitude control experiment of ETS-VI in the field of astrodynamics, navigation, guidance and control; Magnetic transport of bubbles in liquid in microgravity; The outline and development status of JEM-EF in the field of on-orbit and ground support systems. The proceedings also includes the papers titled Conceptual study of H-IIA rocket in the space transportation field; Microgravity research in the microgravity science field; `Project Genesys` in the field of satellite communications and broadcasting.

  13. 6th International Conference in Methodologies and intelligent Systems for Technology Enhanced Learning

    CERN Document Server

    Prieta, Fernando; Mascio, Tania; Gennari, Rosella; Rodríguez, Javier; Vittorini, Pierpaolo

    2016-01-01

    The 6th International Conference in Methodologies and intelligent Systems for Technology Enhanced Learning held in Seville (Spain) is host by the University of Seville from 1st to 3rd June, 2016. The 6th edition of this conference expands the topics of the evidence-based TEL workshops series in order to provide an open forum for discussing intelligent systems for TEL, their roots in novel learning theories, empirical methodologies for their design or evaluation, stand-alone solutions or web-based ones. It intends to bring together researchers and developers from industry, the education field and the academic world to report on the latest scientific research, technical advances and methodologies.

  14. Proceedings: An international workshop on offshore lease abandonment and platform disposal: Technology, regulation, and environmental effects

    Energy Technology Data Exchange (ETDEWEB)

    Pulsipher, A. [ed.] [Louisiana State Univ., Baton Rouge, LA (United States). Center for Energy Studies

    1997-03-01

    This Proceedings volume includes papers prepared for an international workshop on lease abandonment and offshore platform disposal. The workshop was held April 15, 16, and 17, 1996, in New Orleans, Louisiana. Included in the volume are several plenary speeches and issue papers. prepared by six working groups, who discussed: Abandoning Wells; Abandoning Pipelines; Removing Facilities; Site Clearance; Habitat Management, Maintenance, and Planning; and Regulation and Policy. Also included are an introduction, an afterword (reprinted with the permission of its author, John Lohrenz), and, as Appendix C, the complete report of the National Research Council Marine Boards An Assessment of Techniques for Removing Fixed Offshore Structures, around which much of the discussion at the workshop was organized. Short biographies of many speakers, organizers, and chairpersons are included as Appendix A. Appendix B is a list of conference participants. Selected papers have been processes separately for inclusion in the Energy Science and Technology database.

  15. Global biosurveillance: enabling science and technology. Workshop background and motivation: international scientific engagement for global security

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Helen H [Los Alamos National Laboratory

    2011-01-18

    Through discussion the conference aims to: (1) Identify core components of a comprehensive global biosurveillance capability; (2) Determine the scientific and technical bases to support such a program; (3) Explore the improvement in biosurveillance to enhance regional and global disease outbreak prediction; (4) Recommend an engagement approach to establishing an effective international community and regional or global network; (5) Propose implementation strategies and the measures of effectiveness; and (6) Identify the challenges that must be overcome in the next 3-5 years in order to establish an initial global biosurveillance capability that will have significant positive impact on BioNP as well as public health and/or agriculture. There is also a look back at the First Biothreat Nonproliferation Conference from December 2007. Whereas the first conference was an opportunity for problem solving to enhance and identify new paradigms for biothreat nonproliferation, this conference is moving towards integrated comprehensive global biosurveillance. Main reasons for global biosurveillance are: (1) Rapid assessment of unusual disease outbreak; (2) Early warning of emerging, re-emerging and engineered biothreat enabling reduced morbidity and mortality; (3) Enhanced crop and livestock management; (4) Increase understanding of host-pathogen interactions and epidemiology; (5) Enhanced international transparency for infectious disease research supporting BWC goals; and (6) Greater sharing of technology and knowledge to improve global health.

  16. Feasibility survey on international cooperation for high efficiency energy conversion technology in fiscal 1993

    Science.gov (United States)

    1994-03-01

    Following cooperative researches on fuel cell jointly conducted by NEDO and EGAT (Electricity Generating Authority of Thailand), the survey on international cooperation relating to high efficiency energy conversion technology was carried out for the ASEAN countries. The paper summed up the results of the survey. The study of the international cooperation is made for the following three items: a program for periodical exchange of information with EGAT, a project for cooperative research on phosphoric acid fuel cell in Indonesia, and a project for cooperative research with EGAT on electric power storage by advanced battery. In Malaysia, which is small in scale of state, part of the Ministry of Energy, Telecommunication and Posts is only in charge of the energy issue. Therefore, the situation is that they cannot answer well to many items of research/development cooperation brought in from Japan. The item of medium- and long-term developmental research in the Philippines is about the problems which are seen subsequently in the Manila metropolitan area where the problem of outage is being settled. Accordingly, it is essential to promote the cooperative research, well confirming policies and systems of the Ministry of Energy and the national electricity corporation.

  17. Development of pressurized internally circulating fluidized bed combustion technology; Kaatsu naibu junkan ryudosho boiler no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Ishihara, I. [Center for Coal Utilization, Japan, Tokyo (Japan); Nagato, S.; Toyoda, S. [Ebara Corp., Tokyo (Japan)

    1996-09-01

    The paper introduced support research on element technology needed for the design of hot models of the pressurized internally circulating fluidized bed combustion boiler in fiscal 1995 and specifications for testing facilities of 4MWt hot models after finishing the basic plan. The support research was conduced as follows: (a) In the test for analysis of cold model fluidization, it was confirmed that each characteristic value of hot models is higher than the target value. Further, calculation parameters required for computer simulation were measured and data on the design of air diffusion nozzle for 1 chamber wind box were sampled. (b) In the CWP conveyance characteristic survey, it was confirmed that it is possible to produce CWP having favorable properties. It was also confirmed that favorable conveyability can be maintained even if the piping size was reduced down to 25A. (c) In the gas pressure reducing test, basic data required for the design of gas pressure reducing equipment were sampled. Specifications for the fluidized bed combustion boiler of hot models are as follows: evaporation amount: 3070kg/h, steam pressure: 1.77MPa, fuel supply amount: 600kg-coal/h, boiler body: cylinder shape water tube internally circulating fluidized bed combustion boiler. 4 refs., 4 figs.

  18. Proceedings: 2nd IEA international workshop on beryllium technology for fusion

    Energy Technology Data Exchange (ETDEWEB)

    Longhurst, G.R.

    1995-09-01

    The 2nd IEA International Workshop on Beryllium Technology for Fusion was held September 6--8, 1995 at Jackson Lake Lodge, Wyoming. Forty-four participants took part in the workshop representing Europe, Japan, the Russian Federation, and the United States including representatives from both government laboratories and private industry. The workshop was divided into six technical sessions and a ``town meeting`` panel discussion. Technical sessions addressed the general topics of: Thermomechanical Properties; Manufacturing Technologies; Radiation Effects; Plasma/Tritium Interactions; Safety, Applications, and Design; and Joining and Testing. This volume contains the majority of the papers presented at the workshop. In some instances, the authors of the papers could not be present at the workshop, and the papers were given by others, sometimes in summary form and in some instances combined with others. The full papers are included here in the sequence in which they would have been given. In other instances, presentations were made but no papers were submitted for publication. Those papers do not appear here. In summary, the workshop was very successful. The main objectives of bringing key members of the fusion beryllium community together was certainly met. Forty-four participants registered, and 35 papers were presented. Individual papers are indexed separately on the energy data bases.

  19. Development and Field Application Experience of the Reactor Internal Preventive Maintenance Technology

    International Nuclear Information System (INIS)

    Kanno, A.; Yoshikubo, F.; Morinaka, R.; Tanaka, M.; Hasegawa, K.; Hatou, H.

    2012-01-01

    A reactor internal preventive maintenance technology, Water Jet Peening (WJP), has been developed as a stress corrosion cracking (SCC) mitigation technology that has been successfully implemented during refuelling outages at 15 Boiling Water Reactors (BWR) and three (3) Advanced BWRs (during the site construction and in the shop fabrication) in Japan. WJP is one of the most successful underwater peening methods, which utilizes the energy generated from the collapsing of bubbles produced by the cavitating water jet nozzle. The energy produced from the cavitations introduces compressive residual stress on the metal surface and subsurface up to a depth of several hundred micrometers. Most recently, we have successfully applied WJP to the bottom head components and to some cracked areas on the shroud support in the Tokai-2 plant. In the case of the bottom head components, we produced inspection and repair tooling as a contingency in the event SCC was identified and would be required to be repaired prior to the implementation of WJP. (author)

  20. IFMIF (International Fusion Materials Irradiation Facility) key element technology phase task description

    International Nuclear Information System (INIS)

    Ida, M.; Nakamura, H.; Sugimoto, M.; Yutani, T.; Takeuchi, H.

    2000-08-01

    In 2000, a 3 year Key Element technology Phase (KEP) of the International Fusion Materials Irradiation Facility (IFMIF) has been initiated to reduce the key technology risk factors needed to achieve continuous wave (CW) beam with the desired current and energy and to reach the corresponding power handling capabilities in the liquid lithium target system. In the KEP, the IFMIF team (EU, Japan, Russian Federation, US) will perform required tasks. The contents of the tasks are described in the task description sheet. As the KEP tasks, the IFMIF team have proposed 27 tasks for Test Facilities, 12 tasks for Target, 26 tasks for Accelerator and 18 tasks for Design Integration. The task description by RF is not yet available. The task items and task descriptions may be added or revised with the progress of KEP activities. These task description sheets have been compiled in this report. After 3 years KEP, the results of the KEP tasks will be reviewed. Following the KEP, 3 years Engineering Validation Phase (EVP) will continue for IFMIF construction. (author)

  1. Potential of Porous-Media Combustion Technology as Applied to Internal Combustion Engines

    Directory of Open Access Journals (Sweden)

    Miroslaw Weclas

    2010-01-01

    Full Text Available The paper summarizes the knowledge concerning porous media combustion techniques as applied in engines. One of most important reasons of this review is to introduce this still not well known technology to researchers doing with internal combustion engine processes, thermal engines, reactor thermodynamics, combustion, and material science. The paper gives an overview of possible applications of a highly porous open cell structures to in-cylinder processes. This application means utilization of unique features of porous media for supporting engine processes, especially fuel distribution in space, vaporization, mixing with air, heat recuperation, ignition and combustion. There are three ways for applying porous medium technology to engines: support of individual processes, support of homogeneous combustion process (catalytic and non-catalytic with temperature control, and utilization of the porous structure as a heat capacitor only. In the first type of application, the porous structure may be utilized for fuel vaporization and improved fuel distribution in space making the mixture more homogeneous in the combustion chamber. Extension of these processes to mixture formation and ignition inside a combustion reactor allows the realization of a homogeneous and a nearly zero emissions level combustion characterized by a homogeneous temperature field at reduced temperature level.

  2. Fostering a Renewable Energy Technology Industry: An InternationalComparison of Wind Industry Policy Support Mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Joanna; Wiser, Ryan

    2005-11-15

    This article examines the importance of national and sub-national policies in supporting the development of successful global wind turbine manufacturing companies. We explore the motivations behind establishing a local wind power industry, and the paths that different countries have taken to develop indigenous large wind turbine manufacturing industries within their borders. This is done through a cross-country comparison of the policy support mechanisms that have been employed to directly and indirectly promote wind technology manufacturing in twelve countries. We find that in many instances there is a clear relationship between a manufacturer's success in its home country market and its eventual success in the global wind power market. Whether new wind turbine manufacturing entrants are able to succeed will likely depend in part on the utilization of their turbines in their own domestic market, which in turn will be influenced by the annual size and stability of that market. Consequently, policies that support a sizable, stable market for wind power, in conjunction with policies that specifically provide incentives for wind power technology to be manufactured locally, are most likely to result in the establishment of an internationally competitive wind industry.

  3. PREFACE: 21th International Conference for Students and Young Scientists: Modern Technique and Technologies (MTT'2015)

    Science.gov (United States)

    2015-10-01

    Involving young researchers in the scientific process, and allowing them to gain scientific experience, are important issues for scientific development. The International Conference for Students and Young Scientists ''Modern Technique and Technologies'' is one of a number of scientific events, held at National Research Tomsk Polytechnic University aimed at training and forming the scientific elite. During previous years the conference established itself as a serious scientific event at an international level, attracting members which annually number about 400 students and young scientists from Russia and near and far abroad. An important indicator of this scientific event is the large number of scientific areas covered, such as power engineering, heat power engineering, electronic devices for monitoring and diagnostics, instrumentation, materials and technologies of new generations, methods of research and diagnostics of materials, automatic control and system engineering, physical methods science and engineering, design and artistic aspects of engineering, social and humanitarian aspects of engineering. The main issues, which are discussed at the conference by young researchers, are connected with analysis of contemporary problems, application of new techniques and technologies, and consideration of their relationship. Over the years, the conference committee has gained a lot of experience in organizing scientific meetings. There are all the necessary conditions: the staff of organizers includes employees of Tomsk Polytechnic University; the auditoriums are equipped with modern demonstration and office equipment; leading scientists are TPU professors; the status of the Tomsk Polytechnic University as a leading research university in Russia also plays an important role. All this allows collaboration between leading scientists from all around the world, who are annually invited to give lectures at the conference. The editorial board expresses gratitude to the

  4. PREFACE: International Symposium on Vacuum Science & Technology and its Application for Accelerators (IVS 2012)

    Science.gov (United States)

    Pandit, V. S.; Pal, Gautam

    2012-11-01

    The Indian Vacuum Society (IVS) was established in 1970 to promote vacuum science and technology in academic, industrial and R&D institutions in India. IVS is a member society of the International Union for Vacuum Science, Technique and Applications (IUVSTA). It has organized International and national symposia, short term courses and workshops on different aspects of Vacuum Science and Technology at regular intervals. So far 27 National symposia, 4 International Symposia and 47 courses have been organized at various locations in India. There has been an active participation from R&D establishments, universities and Indian industries during all these events. In view of the current global situation and emerging trends in vacuum technology, the executive committee of the IVS suggested to us that we organize an International Symposium at the Variable Energy Cyclotron Centre, Kolkata from 15-17 February 2012. At the Variable Energy Cyclotron Centre we have a large number of high vacuum systems used in the K130 Cyclotron and K500 Superconducting Cyclotron. Also a large cryogenic system using LHe plant is in operation for cryopanels and a superconducting magnet for K-500 Cyclotron. The main areas covered at the symposium were the production and measurement of vacuums, leak detection, design and development of large vacuum systems, vacuum metallurgy, vacuum materials and the application of high vacuums in cyclotrons, LINACS and other accelerators. This symposium provided an opportunity for interaction between active researchers and technologists and allowed them to review the current situation, report recent experimental results, share the available expertise and consider the future R&D efforts needed in this area. Keeping the industrial significance of vacuum technology in mind, an exhibition of the vacuum related equipment, accessories, products etc by various suppliers and manufactures was organized alongside the symposium. Participation by a large number of exhibitors

  5. EDITORIAL: 17th International Summer School on Vacuum, Electron, and Ion Technologies (VEIT 2011)

    Science.gov (United States)

    van de Sanden, M. C. M.; Dimitrova, Miglena; Ghelev, Chavdar

    2012-03-01

    The International Summer School on Vacuum, Electron and Ion Technologies (VEIT) has been organized biennially since 1977, when the VEIT Summer School series was launched by the Institute of Electronics, Bulgarian Academy of Sciences. The aim was to act as a forum for the exchange and dissemination of knowledge and ideas on the latest developments in electron-, ion- and plasma-assisted technologies. The organizers of the 2011 edition of the event were the Institute of Electronics, Bulgarian Academy of Sciences, Sofia, Bulgaria and the Department of Applied Physics, Eindhoven University of Technology, Eindhoven, The Netherlands. Whilst the school initially provided a meeting place for researchers mainly from Eastern and Central European countries, its importance has grown issue by issue. The school is now a major scientific event and a meeting place for young scientists from Eastern and Western Europe involved in research and development associated with high-tech industries. Many former school participants have gone on to become leading scientists in research establishments and companies throughout the world. Leading international companies, such as High Voltage Engineering, Balzers, Varian, and Hauzer have used the VEIT forum to present their products through oral presentations, poster contributions and exhibits. The School Proceedings have been published in special issues of the international journals Vacuum, Plasma Processes and Polymers and Journal of Physics: Conference Series. The Seventeenth edition of VEIT was held in the Black Sea resort of Sunny Beach, Bulgaria on 19-23 September 2011. It was attended by 96 participants from 18 countries: Belgium, Brazil, Bulgaria, Czech Republic, Denmark, France, Germany, Greece, The Netherlands, Romania, Russia, Serbia, Sweden, Switzerland, Turkey, Ukraine, UK and USA. Following the tradition of publishing the VEIT Proceedings, a selection of papers presented at the event is published in this special issue of Journal of

  6. Complementarity between Internal R&D and R&D Cooperation in the Context of Spanish Technological Opportunities

    Directory of Open Access Journals (Sweden)

    Manuel

    2014-12-01

    Full Text Available In this paper, we analyse the existence of complementarity between the internal R&D activities and the R&D cooperative agreements of Spanish innovative manufacturing firms. This analysis is conducted concerning to the context of technological opportunities (industrial and non-industrial and companies’ protection mechanisms (legal and strategic. The database used is the Community Innovation Survey referring to the Spanish economy. The discussion about the results is performed once the coefficients have been obtained by the Heckman correction method. The results indicate evidence of substitutability between internal R&D and R&D cooperation, and non-industrial technological opportunities and strategic protection mechanisms have no influence on innovation output. In addition, we found that non-industrial technological opportunities increase the probability of innovation in companies, although they have no influence on their innovative performance. In contrast, industrial technological opportunities do not contribute to increasing the likelihood of innovation, but influence their innovative performance.

  7. PREFACE: 16th International Summer School on Vacuum, Electron, and Ion Technologies (VEIT 2009)

    Science.gov (United States)

    Möller, Wolfhard; Guerassimov, Nikolay; Ghelev, Chavdar

    2010-04-01

    The International Summer School on Vacuum, Electron and Ion Technologies (VEIT) has been organized biennially since 1977 when the series of VEIT Schools was launched by the Institute of Electronics, Bulgarian Academy of Sciences with the aim to act as a forum for interchange and dissemination of knowledge and ideas on the latest developments in electron-, ion-, and plasma-assisted technologies. Beginning from 2001, the school has been jointly organized with the Institute of Ion Beam Physics and Materials Research, Forschungszentrum Dresden-Rossendorf, Germany. Whereas, the school initially provided a meeting place for researchers mainly from Eastern and Central European countries, its importance grew issue by issue. The school is now a major scientific event and a meeting place for young scientists from Eastern and Western Europe involved in research and development associated with high-tech industries. Many former school participants have gone on to become leading scientists in research establishments and companies throughout the world. Leading international companies, such as High Voltage Engineering, Balzers, Varian, and Hauzer have used the VEIT forum to present their products through oral presentations, poster contributions or exhibits. The School Proceedings have been published in special issues of the international journals Vacuum, Plasma Processes and Polymers, Journal of Physics: Conference Series. The Sixteenth VEIT school was held in the Black Sea resort Sunny Beach, Bulgaria on 28 September to 2 October 2009. It was attended by close to 110 participants from 13 countries: Belgium, Bulgaria, Czech Republic, France, Germany, The Netherlands, Romania, Slovak Republic, Spain, Sweden, Ukraine, UK and USA. Following the tradition of publishing the VEIT Proceedings, a selection of papers presented at the event is published in this volume of Journal of Physics: Conference Series, under the originality and quality criteria of acceptance by the journal, including

  8. MONITORING TECHNOLOGY FOR EARLY DETECTION OF INTERNAL CORROSION FOR PIPELINE INTEGRITY

    Energy Technology Data Exchange (ETDEWEB)

    Glenn M. Light; Sang Y. Kim; Robert L. Spinks; Hegeon Kwun; Patrick C. Porter

    2003-09-01

    Transmission gas pipelines are an important part of energy-transportation infrastructure vital to the national economy. The prevention of failures and continued safe operation of these pipelines are therefore of national interest. These lines, mostly buried, are protected and maintained by protective coating and cathodic protection systems, supplemented by periodic inspection equipped with sensors for inspection. The primary method for inspection is ''smart pigging'' with an internal inspection device that traverses the pipeline. However, some transmission lines are however not suitable for ''pigging'' operation. Because inspection of these ''unpiggable'' lines requires excavation, it is cost-prohibitive, and the development of a methodology for cost-effectively assessing the structural integrity of ''unpiggable'' lines is needed. This report describes the laboratory and field evaluation of a technology called ''magnetostrictive sensor (MsS)'' for monitoring and early detection of internal corrosion in known susceptible sections of transmission pipelines. With the MsS technology, developed by Southwest Research Institute{reg_sign} (SwRI{reg_sign}), a pulse of a relatively low frequency (typically under 100-kHz) mechanical wave (called guided wave) is launched along the pipeline and signals reflected from defects or welds are detected at the launch location in the pulse-echo mode. This technology can quickly examine a long length of piping for defects, such as corrosion wastage and cracking in circumferential direction, from a single test location, and has been in commercial use for inspection of above-ground piping in refineries and chemical plants. The MsS technology is operated primarily in torsional guided waves using a probe consisting of a thin ferromagnetic strip (typically nickel) bonded to a pipe and a number of coil-turns (typically twenty or so turns) wound

  9. A study on the international nuclear Co-operation and the nuclear technology self-reliance strategy

    International Nuclear Information System (INIS)

    Kim, Hwa Sup

    1993-02-01

    To setup a basement for the national nuclear technology strategy, the reorganization of the world structure and the environmental issues are analyzed. And with regards to the self-reliance of nuclear technology, the method for the settlement of the national nuclear infrastructure and the method to strengthen our role in international nuclear community through the co-operation with IAEA is suggested. Also the status and strategy of major nuclear pushing countries are investigated. And followed by this, national nuclear technology status and strategy are analyzed. (Author)

  10. Clinical marginal and internal fit of metal ceramic crowns fabricated with a selective laser melting technology.

    Science.gov (United States)

    Huang, Zhuoli; Zhang, Lu; Zhu, Jingwei; Zhang, Xiuyin

    2015-06-01

    Selective laser melting (SLM) technology has been introduced to fabricate dental restorations. However, the fit of these restorations still needs further study. The purpose of this in vivo investigation was to compare the marginal and internal fit of SLM metal ceramic crowns with 2 lost-wax cast metal ceramic crowns and to evaluate the influence of tooth type on the marginal and internal fit of these crowns. A total of 330 metal ceramic crowns were evaluated. The metal copings were fabricated with SLM Co-Cr, cast Au-Pt, and cast Co-Cr alloy (n=110). The marginal and internal gaps of crowns were recorded by using a replica technique. The anterior and premolar replicas were sectioned 2 times, and molar replicas were sectioned 4 times. The marginal and internal gap width of each cross section was examined by stereomicroscope at ×30 magnification. Two-way analysis of variance was performed to identify the statistical difference among the groups. The marginal fit of the SLM Co-Cr group (75.6 ±32.6 μm) was not different from the cast Au-Pt group (76.8 ±32.1 μm) (P>.05) but was better than the cast Co-Cr group (91.0 ±36.3 μm) (P.05). The mean occlusal gap width of the SLM Co-Cr group (309.8 ±106.6 μm) was significantly higher than that of the cast Au-Pt group (254.6 ±109.6 μm) and the cast Co-Cr group (249.6 ±110.4 μm) (P.05). Also, no significant difference was found in the axial fit among the anterior group (138.3 ±52.5 μm), the premolar group (132.9 ±50.4 μm), and the molar group (134.4 ±52.5 μm) (P>.05). The anterior group (267.6 ±110.2 μm) did not differ from the premolar group (270.2 ±112.8 μm) and the molar group (268.6 ±110.5 μm) in occlusal fit (P>.05). The marginal fit of SLM Co-Cr metal ceramic crowns was similar to that of the cast Au-Pt metal ceramic crowns and was better than that of the cast Co-Cr metal ceramic crowns. The SLM Co-Cr metal ceramic crowns were not significantly different from the 2 cast metal ceramic crowns in axial

  11. 2nd International Conference on Ion Implantation in Semiconductors, Physics and Technology, Fundamental and Applied Aspects

    CERN Document Server

    Graul, Jürgen

    1971-01-01

    In recent years great progress has been made in the field of ion implantation, particularly with respect to applications in semiconductors. It would be impos­ sible not to note the growing interest in this field, both by research groups and those directly concerned with production of devices. Furthermore, as several papers have pointed out, ion implantation and its associated technologies promise exciting advances in the development of new kinds of devices and provide power­ ful new tools for materials investigations. It was, therefore, appropriate to arrange the II. International Conference on Ion Implantation in Semiconductors within the rather short time of one year since the first conference was held in 1970 in Thousand Oaks, California. Although ori­ ginally planned on a small scale with a very limited number of participants, more than two hundred scientists from 15 countries participated in the Conference which was held May 24 - 28, 1971 at the Congress Center in Garmisch-Partenkirchen. This volume c...

  12. Status of international cooperation in nuclear technology on testing/research reactors between JAEA and INP-NNC

    International Nuclear Information System (INIS)

    Kawamura, Hiroshi; Tsuchiya, Kunihiko; Takemoto, Noriyuki; Kimura, Akihiro; Tanimoto, Masataka; Izumo, Hironobu; Chakrov, Petr; Gizatulin, Shamil; Chakrova, Yelena; Ludmila, Chkushuina; Asset, Shaimerdenov; Nataliya, Romanova

    2012-02-01

    Based on the implementing arrangement between National Nuclear Center of the Republic of Kazakhstan (NNC) and the Japan Atomic Energy Agency (JAEA) for 'Nuclear Technology on Testing/Research Reactors' in cooperation in Research and Development in Nuclear Energy and Technology, four specific topics of cooperation (STC) have been carried out from June, 2009. Four STCs are as follows; (1) STC No.II-1 : International Standard of Instrumentation. (2) STC No.II-2 : Irradiation Technology of RI Production. (3) STC No.II-3 : Lifetime Expansion of Beryllium Reflector. (4) STC No.II-4 : Irradiation Technology for NTD-Si. The information exchange, personal exchange and cooperation experiments are carried out under these STCs. The status in the field of nuclear technology on testing/research reactors in the implementing arrangement is summarized, and future plans of these specific topics of cooperation are described in this report. (author)

  13. Emerging Computation and Information teChnologies for Education : Proceeding of 2012 International Conference on Emerging Computation and Information teChnologies for Education

    CERN Document Server

    Xu, Linli; Tian, Wenya

    2012-01-01

    The 2012 International Conference on Emerging Computation and Information teChnologies for Education (ECICE 2012) was  held on Jan. 15-16, 2012, Hangzhou, China.  The main results of the conference are presented in this proceedings book of carefully reviewed and accepted paper addressing the hottest issues in emerging computation and information technologies used for education. The volume covers a wide series of topics in the area, including Computer-Assisted Education, Educational Information Systems, Web-based Learning, etc.

  14. Trends of Educational Technology Research: More than a Decade of International Research in Six SSCI-Indexed Refereed Journals

    Science.gov (United States)

    Hsu, Yu-Chang; Hung, Jui-Long; Ching, Yu-Hui

    2013-01-01

    This study applied text mining methods to examine the abstracts of 2,997 international research articles published between 2000 and 2010 by six journals included in the Social Science Citation Index in the field of Educational Technology (EDTECH). A total of 19 clusters of research areas were identified, and these clusters were further analyzed in…

  15. The North/South Debate: Technology, Basic Human Needs and the New International Economic Order. Working Paper Number Twelve. 1980.

    Science.gov (United States)

    Galtung, Johan

    This document contains two articles by Johan Galtung presented as papers at an international conference on the relationship of technology to the environment and human needs. The monograph is part of a series intended to stimulate research, education, dialogue, and political action toward a just world order. The first paper, "Towards a New…

  16. International careers and career success of Indian women in science & technology : The importance of career capital and organizational capital

    NARCIS (Netherlands)

    Valk, R.; van der Velde, E.G.; van Engen, Marloes

    2014-01-01

    This article presents a study on international careers and career success of Indian women in Science & Technology (S&T). We conducted interviews with 30 (upper) middle class Indian women in New Delhi and Bangalore (India) who pursued careers abroad as self-initiated expatriates (SIEs). Important

  17. 19th International Summer School on Vacuum, Electron and Ion Technologies (VEIT2015)

    International Nuclear Information System (INIS)

    2016-01-01

    The International Summer School on Vacuum, Electron and Ion Technologies (VEIT) has been organized biennially since 1978, when the series of VEIT Schools was launched by the Institute of Electronics, Bulgarian Academy of Sciences with the aim to act as a forum for exchange and dissemination of knowledge and ideas on the latest developments in electron-, ion-, and plasma-assisted technologies. The organizers of the 2015 edition of the event were the Institute of Electronics, Bulgarian Academy of Sciences, Sofia, Bulgaria and the Dutch Institute for Fundamental Energy Research, Eindhoven, The Netherlands. While the school has initially been providing a meeting place for researchers mainly from Eastern and Central European countries, its importance has grown issue by issue. The school is now a major scientific event and a meeting place for young scientists from Eastern and Western Europe involved in research and development associated with high-tech industries. Many former school participants have gone on to become leading scientists in research establishments and companies throughout the world. Leading international companies, such as High Voltage Engineering, Balzers, Varian, and Hauzer have used the VEIT forum to present their products through oral presentations, poster contributions or exhibits. The School Proceedings have been published in special issues of the international journals Vacuum, Plasma Processes and Polymers, Journal of Physics: Conference Series. The Nineteenth edition of VEIT was held in the Black Sea resort Sozopol, Bulgaria, on 21--25 September 2015. It was attended by 101 participants from 16 countries: Bulgaria, Czech Republic, France, Germany, Greece, The Netherlands, Portugal, Romania, Russia, Serbia, Slovakia, Slovenia, Sweden, Turkey, Ukraine and UK. Following the tradition of publishing the VEIT Proceedings, a selection of papers presented at the event are published in this special issue of Journal of Physics: Conference Series, under the

  18. International Façades - CROFT. Climate Related Optimized Façade Technologies

    Directory of Open Access Journals (Sweden)

    Marcel Bilow

    2012-04-01

    Full Text Available Looking at Central European building projects illustrates an awareness of sustainability and the need to save energy. This trend is based on the finiteness of natural resources, and is thus wise to follow. Developments in this region including passive house technologies, and energy plus solutions that create more energy than they use have become realisable. But it is not increasing technological knowledge alone that supported these developments; the Central European climate makes it possible to invent technological solutions that allow for maximum comfort while maintaining low energy consumption. Other regions have experienced a building boom over the past decades that has dramatically increased city sizes. A detailed examination of such building projects illustrates that most of them strive for the international standard with a high glazing ratio in the style of the Central European examples. But how can architecture be transferred to regions with entirely different climate conditions? The answer lies in the technological possibilities we have at our disposal today. The main research question of this thesis refers to utilising the local climate. Which methods are necessary to plan a building - and a façade as the interface between the inside and the outside, in particular - while working with, not against the climate? Sailing has been used as an analogy: only with the knowledge of winds and tides can we use them to efficiently move across bodies of water. Those who have not learned or understood this will have to use a motorboat and pay the price for petrol. Chapter 2 ‘Climate zones’ describes the different climate zones and their particularities, analysed with the help of eight different boomtowns. The mild Central European climate becomes particularly apparent when compared to tropic locations such as Singapore. Here, very high average temperatures and humidity levels require that we rethink and find new solutions. In chapter 3

  19. JPRS Report, Science & Technology, 16th International Congress of the International Society for Photogrammetry and Remote Sensing -- Volume 2

    Science.gov (United States)

    1989-01-27

    Barbosa, Sergio de Paula Pereira, NCT-INPE Instituto de Pesquisas Espaciais; Rod. Presidente Dutra, km 40 12630 — Cachoeira Paulista, SP Brazil...Paraguay, People s Rep. of China, Peru , Uruguay, USA, FAO, UN, World Bank and the interamerican Development Bank. e) International training courses...Rego Barbosa, Osvaldo Caldas; MCT - MINISTERIO DA CIENCIA E TECNOLOGIA, INPE - INSTITUTO DE PESQUISAS ESPACIAIS, Rod. Presidente Dutra, km 40 12630

  20. Environmental Technology Verification Report for Avante International Technology, Inc., PanaSec Mobile Personnel and Asset Visibility System

    Science.gov (United States)

    Ths test simulated through routine land transportation routes and across international ports of entry in the El Paso/Ciudad Juarez trade area. RFID tags were attached to four of each container type for a total of 12 containers which were loaded onto a standard 53-foot semi-truck...

  1. Directed International Technological Change and Climate Policy: New Methods for Identifying Robust Policies Under Conditions of Deep Uncertainty

    Science.gov (United States)

    Molina-Perez, Edmundo

    It is widely recognized that international environmental technological change is key to reduce the rapidly rising greenhouse gas emissions of emerging nations. In 2010, the United Nations Framework Convention on Climate Change (UNFCCC) Conference of the Parties (COP) agreed to the creation of the Green Climate Fund (GCF). This new multilateral organization has been created with the collective contributions of COP members, and has been tasked with directing over USD 100 billion per year towards investments that can enhance the development and diffusion of clean energy technologies in both advanced and emerging nations (Helm and Pichler, 2015). The landmark agreement arrived at the COP 21 has reaffirmed the key role that the GCF plays in enabling climate mitigation as it is now necessary to align large scale climate financing efforts with the long-term goals agreed at Paris 2015. This study argues that because of the incomplete understanding of the mechanics of international technological change, the multiplicity of policy options and ultimately the presence of climate and technological change deep uncertainty, climate financing institutions such as the GCF, require new analytical methods for designing long-term robust investment plans. Motivated by these challenges, this dissertation shows that the application of new analytical methods, such as Robust Decision Making (RDM) and Exploratory Modeling (Lempert, Popper and Bankes, 2003) to the study of international technological change and climate policy provides useful insights that can be used for designing a robust architecture of international technological cooperation for climate change mitigation. For this study I developed an exploratory dynamic integrated assessment model (EDIAM) which is used as the scenario generator in a large computational experiment. The scope of the experimental design considers an ample set of climate and technological scenarios. These scenarios combine five sources of uncertainty

  2. PREFACE: Fifteenth International Summer School on Vacuum, Electron and Ion Technologies (VEIT 2007)

    Science.gov (United States)

    Guerassimov, Nikolay; Möller, Wolfhard; Ghelev, Chavdar

    2008-03-01

    The International Summer School on Vacuum, Electron and Ion Technologies (VEIT) has been organized biannually since 1977. It is a forum for the interchange and dissemination of knowledge and ideas on the latest developments in electron-, ion-, and plasma-assisted technologies. The organizers of the event (since 2001) have been the Institute of Electronics, Bulgarian Academy of Sciences, Sofia, Bulgaria, the Institute of Ion Beam Physics and Materials Research, Forschungszentrum Dresden-Rossendorf, Dresden, Germany, and the Evrika Foundation, Sofia, Bulgaria. The fifteenth meeting of VEIT was held in the Black Sea resort of Sozopol, Bulgaria from 17-21 September 2007 and was attended by around 120 participants from 17 countries: Australia, Belgium, Bulgaria, Canada, Czech Republic, Germany, Hungary, Italy, The Netherlands, Poland, Pakistan, Romania, Sweden, Switzerland, Ukraine, UK and USA. Following the tradition of publishing the VEIT Proceedings, a selection of papers presented at the event is published in this volume of Journal of Physics: Conference Series, all peer reviewed to meet the originality and quality criteria of the journal. The school consisted of 11 oral and 3 poster sessions. There were 17 invited talks of general interest and 12 progress reports were presented orally. In total 86 contributed papers were presented during the three poster sessions. There were several scientific highlights covering the fundamentals of gas discharges and interaction of fast particles with solids, a wide range of conventional and novel applications such as for hard coatings and optical/protective layers, nanosized structures produced by evaporation, sputtering or external irradiation. Recent achievements in the modification of materials using charged particles or laser beams, thin layers deposition, properties, and characterization and novel materials, techniques, devices were highlighted. Despite the busy scientific program, the atmosphere was relaxed and informal

  3. 75 FR 20388 - International Business Machines Corporation, Global Technology Services Business Unit, Integrated...

    Science.gov (United States)

    2010-04-19

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,248] International Business... Assistance on July 31, 2009, applicable to workers of International Business Machines Corporation, Global... on-site at the Armonk, New York, location of International Business Machines Corporation, Global...

  4. International Façades - CROFT : Climate Related Optimized Façade Technologies

    NARCIS (Netherlands)

    Bilow, M.

    2012-01-01

    "International Façades - CROFT" links the fields of architecture, building services and building physics. It aims at an international diversity in façade design to reduce energy consumption in building design. Current architectural planning practices, such as the International Style, perceive the

  5. Strategies for Promoting Green Building Technologies Adoption in the Construction Industry—An International Study

    Directory of Open Access Journals (Sweden)

    Albert Ping Chuen Chan

    2017-06-01

    Full Text Available Because green building technologies (GBTs adoption is a promising way of ameliorating the sustainability performance of buildings, GBTs are receiving increased interest in the global construction community. The barriers to the adoption of GBTs, such as higher cost and lack of awareness, further indicate that proper strategies need to be devised for promoting the wider adoption of GBTs in buildings development. However, there exist limited empirical studies identifying the strategies for promoting GBTs adoption in the construction industry. This study aims to identify the strategies that are important for promoting GBTs adoption in construction. After a comprehensive literature review to identify strategies for the promotion of GBTs adoption, empirical data were gleaned through a questionnaire survey with 104 green building experts around the world. The analysis results validated the importance of all of the 12 promotion strategies used for the study. Green building experts from different countries and with different backgrounds had significant agreement on the relative importance ranking of the promotion strategies. Furthermore, “financial and further market-based incentives for GBTs adopters”, “availability of better information on cost and benefits of GBTs”, “mandatory governmental policies and regulations”, and “green rating and labeling” were identified as the top four important promotion strategies. The research findings provide a valuable reference to assist practitioners and policy makers in developing practical strategies for promoting GBTs adoption to eventually achieve the sustainable development of buildings. From the perspective of international experts, this study adds to the green building literature by offering empirical evidence of the important strategies for promoting GBTs adoption in the construction industry. Future research will investigate the interrelationships among the promotion strategies and their

  6. Scientific and technological monitoring: international overview on R. and D. related to Pra's

    International Nuclear Information System (INIS)

    Llory, M.; Stioui, A.

    1993-03-01

    In 1989, the R and D Division of Electricite de France launched a programme for a Technological and Scientific Overview (TSO) covering a certain number of topics considered to be important for the future of EDF. Probabilistic approaches to studies related to safety were considered to be strategically important to EDF, and therefore this area was selected for further study. A TSO is a process which can only start on the basis of a structured state-of-the-art organized as a basis of knowledge, together with the highlighting of a certain number of scientific and strategic ''set of references . The state-of-the-art of R and D related to Probabilistic Safety Assessment (PSA) was carried out in collaboration between the EDF R and D Division (SR branch) and SRI International. The approach chosen included: segmentation of the wide field of PSAs into subject areas, topics and sensitive points to be monitored; conception of a grid for the interviews; approximately thirty in-depth interviews of organizations and experts representative of the domain; analysis leading to identify certain problems areas or particularly important features. Emerging themes for research and further consideration in relation to PSAs, their application and their limits were also identified. Based on this state-of-the-art, various themes of monitoring were defined (living PSAs, limits of PSAs,...) and an organizational structure for monitoring was set up in the branch. The state of the art is not static, it is the reason why an in-depth extension of the study was undertaken on issues of special interest for EDF. (authors). 2 figs., 2 refs

  7. Proceedings of the Sixth International Conference on Management Science and Engineering Management : Focused on Electrical and Information Technology

    CERN Document Server

    Yasinzai, Masoom; Lev, Benjamin

    2013-01-01

    Welcome to the proceedings of the Sixth International Conference on Management Science and Engineering Management (ICMSEM2012) held from November 11 to 14, 2012 at Quaid-i-Azam University, Islamabad, Pakistan and supported by Sichuan University (Chengdu, China), Quaid-i-Azam University (Islamabad, Pakistan) and The National Natural Science Foundation of China. The International Conference on Management Science and Engineering Management is the annual conference organized by the International Society of Management Science and Engineering Management. The goals of the Conference are to foster international research collaborations in Management Science and Engineering Management as well as to provide a forum to present current research results. The papers are classified into 8 sections: Computer and Networks, Information Technology, Decision Support System, Industrial Engineering, Supply Chain Management, Project Management, Manufacturing and Ecological Engineering. The key issues of the sixth ICMSEM cover variou...

  8. 25 CFR 542.16 - What are the minimum internal control standards for information technology?

    Science.gov (United States)

    2010-04-01

    ... information technology? 542.16 Section 542.16 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE... standards for information technology? Link to an amendment published at 73 FR 60498, Oct. 10, 2008. This... adequately segregated and monitored to prevent error in general information technology procedures to go...

  9. JPRS Report, Science and Technology: Europe Twenty-Fourth ISATA International Symposium on Automotive Technology and Automation.

    Science.gov (United States)

    1991-09-05

    Traffic Research Centre VSC, The Netherlands 910061 " Adaptability in Driver Support" M J Kuiken, PGM Miltenburg, 733 Traffic Research Centre, The...Local C Control C Centre R Road S Side S Station /tag*/ Traffic Lights Variable Message Signs Beacons P’R a On-Board IHt Celular Rade...are not suitable for automatic debiting, nevertheless the same technological approach can be adapted to the stated requirements . 1*3 The DACAR

  10. XIII International science and technology conference High-tech chemical technologies-2010 with elements of Scientific school for young people Innovations in chemistry: achievements and prospects. Summaries of reports

    International Nuclear Information System (INIS)

    2010-01-01

    Materials of the XIII International science and technology conference High-tech chemical technologies-2010 with elements of Scientific school for young people Innovations in chemistry: achievements and prospects (29 June-2 July 2010, Ivanovo) are presented. During the conference the following areas: theoretical aspects of chemical technology; technology of deep oil refining and the production of organic substances; technology of drugs and biologically active substances; technology of inorganic materials, polymers and composites based on them - the technological principles and methods of synthesis, modification, and processing; environmental and economic problems of chemical technologies and their solutions are considered [ru

  11. The International Safeguards Technology Base: How is the Patient Doing? An Exploration of Effective Metrics

    Energy Technology Data Exchange (ETDEWEB)

    Schanfein, Mark J; Gouveia, Fernando S

    2010-07-01

    The term “Technology Base” is commonly used but what does it mean? Is there a common understanding of the components that comprise a technology base? Does a formal process exist to assess the health of a given technology base? These are important questions the relevance of which is even more pressing given the USDOE/NNSA initiatives to strengthen the safeguards technology base through investments in research & development and human capital development. Accordingly, the authors will establish a high-level framework to define and understand what comprises a technology base. Potential goal-driven metrics to assess the health of a technology base will also be explored, such as linear demographics and resource availability, in the hope that they can be used to better understand and improve the health of the U.S. safeguards technology base. Finally, through the identification of such metrics, the authors will offer suggestions and highlight choices for addressing potential shortfalls.

  12. The International Safeguards Technology Base: How is the Patient Doing? An Exploration of Effective Metrics

    International Nuclear Information System (INIS)

    Schanfein, Mark J.; Gouveia, Fernando S.

    2010-01-01

    The term 'Technology Base' is commonly used but what does it mean? Is there a common understanding of the components that comprise a technology base? Does a formal process exist to assess the health of a given technology base? These are important questions the relevance of which is even more pressing given the USDOE/NNSA initiatives to strengthen the safeguards technology base through investments in research and development and human capital development. Accordingly, the authors will establish a high-level framework to define and understand what comprises a technology base. Potential goal-driven metrics to assess the health of a technology base will also be explored, such as linear demographics and resource availability, in the hope that they can be used to better understand and improve the health of the U.S. safeguards technology base. Finally, through the identification of such metrics, the authors will offer suggestions and highlight choices for addressing potential shortfalls.

  13. Latest developments on the highly granular Silicon-Tungsten Electromagnetic Calorimeter technological prototype for the International Large Detector

    CERN Document Server

    Irles, Adrián

    2017-01-01

    High precision physics at future colliders requires unprecedented highly granular calorimeters for the application of the Particle Flow (PF) algorithm. The physical proof of concept was given in the previous campaign of beam tests of physic prototypes within the CALICE collaboration. We present here the latest beam and laboratory test results and R&D developments for the Silicon-Tungsten Electromagnetic Calorimeter technological prototype with fully embedded very front-end (VFE) electronics for the International Large Detector at the International Linear Collider project.

  14. The Competitive status of the U.S. civil aviation manufacturing industry: a study of the influences of technology in determining international industrial competitive advantage

    National Research Council Canada - National Science Library

    Seitz, Frederick; Steele, Lowell W

    1985-01-01

    ... A Study of the Influences of Technology in Determining International Industrial Competitive Advantage Prepared by the U.S. Civil Aviation Manufacturing Industry Panel, Committee on Technology and International Economic and Trade Issues of the Office of the Foreign Secretary, National Academy of Engineering and the Commission on Engineering and Techni...

  15. International School of Innovative Technology for Cleaning the Environment, Ettore Majorana Centre for Scientific Culture: Erice, Sicily, Italy

    Energy Technology Data Exchange (ETDEWEB)

    Ragaini, R.C.

    1994-06-01

    The International School of Innovative Technology for Cleaning the Environment was founded at the Ettore Majorana Centre for Scientific Culture (EMCSC), the seat of the World Laboratory Mediterranean Branch, in 1989. The School primarily organizes and hosts training courses and advanced study courses addressing state-of-the-art technologies to clean the environment, minimize waste generation, prevent pollution, and identify strategies to choose environmentally resilient sites and processes for new industrial installations. The School also participates in facilitating multi-national research projects for developing countries under the auspices of the World Laboratory and other sponsoring agencies.

  16. Second meeting of the International Working Group on Advanced Technologies for Water Cooled Reactors, Helsinki, 6-9 June 1988

    International Nuclear Information System (INIS)

    1989-05-01

    The Second Meeting of the IAEA International Working Group on Advanced Technologies for Water Cooled Reactors (IWGATWR) was held in Helsinki, Finland, from 6-9 June 1988. The Summary Report (Part II) contains the papers which review the national programmes since the first meeting of IWGATWR in May 1987 in the field of Advanced Technologies for Water Cooled Reactors and other presentations at the Meeting. A separate abstract was prepared for each of these 12 papers presented at the meeting. Figs and tabs

  17. Proceedings of the third international conference on recent advances in material processing technology: book of abstracts

    International Nuclear Information System (INIS)

    Mannan, S.L.; Manisekar, K.; Lenin, N.; Ramanan, P.

    2013-01-01

    The objective of the conference was to disseminate information on the latest trends and global research in manufacturing and material processing techniques. This conference provided a forum to share information on technologies, concepts, and techniques to improve the quality of the products and productivity. The deliberations at the conference provided discussion on Casting Technology, Forming processes, Manufacturing Techniques, Simulation and Modeling Techniques, Tools and Precision Engineering, Condition Monitoring, Composites, Optimization Techniques, Surface Engineering, Welding Technology, Nano Technology, Recycle Technology, Fuel Cell Technology, Sensors and Robotics, Materials for Energy Engineering, Rapid Protyping, Eco-Manufacturing Systems, Functionally Graded Materials, Non-Destructive Evaluation, Materials Development and Evaluation etc. Articles relevant to INIS are indexed separately

  18. International initiative to engage Iraq's science and technology community : report on the priorities of the Iraqi science and technology community.

    Energy Technology Data Exchange (ETDEWEB)

    Littlefield, Adriane C.; Munir, Ammar M. (Arab Science and Technology Foundation, Sharjah, United Arab Emirates); Alnajjar, Abdalla Abdelaziz (Arab Science and Technology Foundation, Sharjah, United Arab Emirates); Pregenzer, Arian Leigh

    2004-05-01

    This report describes the findings of the effort initiated by the Arab Science and Technology Foundation and the Cooperative Monitoring Center at Sandia National Laboratories to identify, contact, and engage members of the Iraqi science and technology (S&T) community. The initiative is divided into three phases. The first phase, the survey of the Iraqi scientific community, shed light on the most significant current needs in the fields of science and technology in Iraq. Findings from the first phase will lay the groundwork for the second phase that includes the organization of a workshop to bring international support for the initiative, and simultaneously decides on an implementation mechanism. Phase three involves the execution of outcomes of the report as established in the workshop. During Phase 1 the survey team conducted a series of trips to Iraq during which they had contact with nearly 200 scientists from all sections of the country, representing all major Iraqi S&T specialties. As a result of these contacts, the survey team obtained over 450 project ideas from Iraqi researchers. These projects were revised and analyzed to identify priorities and crucial needs. After refinement, the result is approximately 170 project ideas that have been categorized according to their suitability for (1) developing joint research projects with international partners, (2) engaging Iraqi scientists in solving local problems, and (3) developing new business opportunities. They have also been ranked as to high, medium, or low priority.

  19. PREFACE: 2nd International School and Conference Saint-Petersburg OPEN on Optoelectronics, Photonics, Engineering and Nanostructures (SPbOPEN2015)

    Science.gov (United States)

    2015-11-01

    The 2nd International School and Conference ''Saint Petersburg OPEN 2015'' on Optoelectronics, Photonics, Engineering and Nanostructures was held on April 6 - 8, 2015 at St. Petersburg Academic University. The School and Conference included a series of invited talks given by leading professors with the aim to introduce young scientists with actual problems and major advances in physics and technology. The keynote speakers were Mikhail V. Maximov (Ioffe Physico-Technical Institute RAS, Russia) Vladimir G. Dubrovskii (St. Petersburg Academic University and St. Petersburg State University, Russia) Anton Yu. Egorov (JSC Connector Optics, Russia) Victor V. Luchinin (St. Petersburg State Electrotechnical University, Russia) Vladislav E. Bugrov (St. Petersburg University of Internet Technologies, Mechanics and Optics, Russia) Vitali A. Schukin (VI Systems, Germany) Yuri P. Svirko (University of Eastern Finland, Finland) During the poster session all undergraduate and graduate students attending the conference presented their works. A sufficiently large number of participants, with more than 170 student attendees from all over the world, allowed the Conference to provide a fertile ground for fruitful discussions between the young scientists as well as to become a perfect platform for valuable discussions between student authors and highly experienced scientists. The best student papers, which were selected by the Program Committee and by the invited speakers basing on the theses and their poster presentation, were awarded with diplomas of the conference - see the photos. This year ''Saint Petersburg OPEN 2015'' is organized by St. Petersburg Academic University in cooperation with Peter the Great St. Petersburg Polytechnic University. The School and Conference is supported by Russian Science Foundation, SPIE (The International Society for Optics and Photonics), OSA (The Optical Society) and by Skolkovo Foundation. It is a continuation of the annual schools and seminars for

  20. REGULATION OF STANDARDS IN TECHNOLOGY MARKETS: TRACING CONNECTIONS BETWEEN COMPETITION LAW AND INTERNATIONAL TRADE

    OpenAIRE

    Tremolada, Riccardo

    2017-01-01

    The implications of standardization cannot be overstated: today, the global economy relies heavily on technical standards because they foster technology diffusion and economic growth. Yet little is known about their implications for global competition policy, innovation and trade. This absence in legal analysis is particularly critical in the context of disruptive technological advancements featured in information and communication technology and other innovation-intensive sectors, characteri...

  1. Predicting the impacts of new technology aircraft on international air transportation demand

    Science.gov (United States)

    Ausrotas, R. A.

    1981-01-01

    International air transportation to and from the United States was analyzed. Long term and short term effects and causes of travel are described. The applicability of econometric methods to forecast passenger travel is discussed. A nomograph is developed which shows the interaction of economic growth, airline yields, and quality of service in producing international traffic.

  2. Technology and international strategies in born global firms: evidence from The Netherlands

    NARCIS (Netherlands)

    Anne van Delft; Sumit Kundu; Hein Roelfsema

    2010-01-01

    This paper analyzes the internationalization strategies of biotech firms in the Netherlands. We find that many of these firms are born internationals in the sense that from their inception they are actively engaged in international cooperation. However, we find that the nature of potential

  3. INTERNATIONAL MIGRATION AND TECHNOLOGICAL MANAGEMENT IN COFFEE PRODUCTION IN TWO COMMUNITIES IN THE CENTRAL AREA OF VERACRUZ STATE

    Directory of Open Access Journals (Sweden)

    Martha Elena Nava-Tablada

    2011-07-01

    Full Text Available Veracruz comes third in terms of national coffee production; however this sector is facing a crisis because of the fall in prices in the international market which has resulted amongst other things in increased emigration to the United States. The aim of this study was to analyze the relationship between migration and the level of technology employed in coffee production in two communities in the central area of Veracruz State: Capulapa and Zapoapan. Information was obtained through observation and by interviewing the members of 46 family production units (FPU. In Zapoapan, the FPUs which presented the highest level of technological management in their coffee plantations were those with greatest access to capital, as they are more extensive, produce other crops than coffee, have more family members in the United States and receive greater remittances; investing 14% more in agriculture. In the case of the FPUs in Capulapa, no relationship was observed between the number of international emigrants, the amount of remittances received and the level of technological management. This may be because 83% of the FPUs cultivate solely coffee and are beholden to the ups and downs of the international market, thus their socio-economic situation is more precarious and 86% of remittances are directed towards family sustenance; with only 7% directed towards agricultural investment.

  4. Assistive Technology in Teacher-Training Programs: A National and International Perspective

    Science.gov (United States)

    Safhi, Mohammad Y.; Zhou, Li; Smith, Derrick W.; Kelley, Pat

    2009-01-01

    The study presented here investigated how assistive technology training is being integrated into teacher preparation programs for teachers of students with visual impairments worldwide. The survey investigated how knowledge of assistive technology is addressed (whether in specific courses or by embedding the content throughout the program), what…

  5. International arbejdsdeling

    DEFF Research Database (Denmark)

    Henten, Anders

    1998-01-01

    Article dealing with the implications of informátion and communication technologies on the international division of labour.......Article dealing with the implications of informátion and communication technologies on the international division of labour....

  6. Outlook for renewable energy technologies: Assessment of international programs and policies

    Energy Technology Data Exchange (ETDEWEB)

    Branstetter, L.J.; Vidal, R.C.; Bruch, V.L.; Zurn, R.

    1995-02-01

    The report presents an evaluation of worldwide research efforts in three specific renewable energy technologies, with a view towards future United States (US) energy security, environmental factors, and industrial competitiveness. The overall energy technology priorities of foreign governments and industry leaders, as well as the motivating factors for these priorities, are identified and evaluated from both technological and policy perspectives. The specific technologies of interest are wind, solar thermal, and solar photovoltaics (PV). These program areas, as well as the overall energy policies of Denmark, France, Germany, Italy, the United Kingdom (UK), Japan, Russia, and the European Community as a whole are described. The present and likely future picture for worldwide technological leadership in these technologies-is portrayed. The report is meant to help in forecasting challenges to US preeminence in the various technology areas, particularly over the next ten years, and to help guide US policy-makers as they try to identify specific actions which would help to retain and/or expand the US leadership position.

  7. 2nd International Workshop on Learning Technology for Education in Cloud

    CERN Document Server

    Tao, Yu-Hui; Yang, Hsin-Chang; Ting, I-Hsien

    2014-01-01

    Proceedings from the 2013 LTEC conference in Kaohsiung,Taiwan. The papers examine diverse aspects of Learning Technology for Education in Cloud environments, including social, technical and infrastructure implications. Also addressed is the question of how cloud computing can be used to design applications to support real time on demand learning using technologies. The workshop proceedings provide opportunities for delegates to discuss the latest research in TEL (Technology Enhanced Learning) and its impacts for learners and institutions, using cloud technolgies.

  8. The role of international business in clean technology transfer and development

    NARCIS (Netherlands)

    Kolk, A.

    2015-01-01

    While research has generated very useful insights, usually at the macro level, regarding the multifaceted nature of environmental innovation and regulation, the characteristics and drivers peculiar to international companies have remained underexposed in the policy-related literature on clean

  9. Improving internal communication between marketing and technology functions for successful new food product development

    NARCIS (Netherlands)

    Jacobsen, L.F.; Grunert, K.G.; Søndergaard, H.A.; Steenbekkers, B.; Dekker, M.; Lähteenmäki, L.

    2014-01-01

    In order to increase the new product development (NPD) success for novel food products, it is crucial to understand how information can be optimally disseminated within companies. This systematic literature review concentrates on factors influencing internal communication between market and

  10. Assessing the quality of decision support technologies using the International Patient Decision Aid Standards instrument (IPDASi).

    NARCIS (Netherlands)

    Elwyn, G.; O'Connor, A.M.; Bennett, C.; Newcombe, R.G.; Politi, M.; Durand, M.A.; Drake, E.; Joseph-Williams, N.; Khangura, S.; Saarimaki, A.; Sivell, S.; Stiel, M.; Bernstein, S.J.; Col, N.; Coulter, A.; Eden, K.; Harter, M.; Rovner, M.H.; Moumjid, N.; Stacey, D.; Thomson, R.; Whelan, T.; Weijden, G.D.E.M. van der; Edwards, A.

    2009-01-01

    OBJECTIVES: To describe the development, validation and inter-rater reliability of an instrument to measure the quality of patient decision support technologies (decision aids). DESIGN: Scale development study, involving construct, item and scale development, validation and reliability testing.

  11. The Adoption and Effects of International Telecommunication Trends in South Africa: Technology and Market Perspectives

    CSIR Research Space (South Africa)

    Evert, GP

    2014-07-01

    Full Text Available The evolution of the telecommunication industry, from both technology and market perspectives, is increasing at a rapid rate. At the forefront of this evolution are the telecommunication standards organisations and vendors. However, the evolution...

  12. CRIBs (Climate Relevant Innovation-system Builders): a powerful new focus for international climate technology policy

    OpenAIRE

    Ockwell, David; Byrne, Robert

    2014-01-01

    This briefing suggests some key ways in which the UNFCCC architecture could be extended in order to strengthen National Systems of Innovation (NISs) to achieve more transformative rates of climate technology transfer and development via the creation of “Climate Relevant Innovation-system Builders” (CRIBs).\\ud This policy briefing builds on an invited presentation by one of the authors at a workshop on NSIs convened by the Technology Executive Committee (TEC) of the United Nations Framework Co...

  13. Determinants of international technology transfer: an empirical analysis of the Enterprise Europe Network

    OpenAIRE

    Ana Carina Araújo; Aurora A.C. Teixeira

    2013-01-01

    Given that science and technology are inductors of economic development, the emergence of a knowledge-based economy creates an overlay of communications and expectations that have led to institutional restructuring based on innovative capacities. While the literature tends to concentrate on university-industry relations, this paper intends go a step further, by exploring the university-industry-government relations established in a technology transfer context. Particular attention is paid to ...

  14. 5th International and 26th All India Manufacturing Technology, Design and Research Conference

    CERN Document Server

    Dixit, Uday

    2015-01-01

    This book presents selected research papers of the AIMTDR 2014 conference on application of laser technology for various manufacturing processes such as cutting, forming, welding, sintering, cladding and micro-machining. State-of-the-art of these technologies in terms of numerical modeling, experimental studies and industrial case studies are presented. This book will enrich the knowledge of budding technocrats, graduate students of mechanical and manufacturing engineering, and researchers working in this area.  

  15. The role of hospital payments in the adoption of new medical technologies: an international survey of current practice.

    Science.gov (United States)

    Sorenson, Corinna; Drummond, Michael; Torbica, Aleksandra; Callea, Giuditta; Mateus, Ceu

    2015-04-01

    This study examined the role of prospective payment systems in the adoption of new medical technologies across different countries. A literature review was conducted to provide background for the study and guide development of a survey instrument. The survey was disseminated to hospital payment systems experts in 15 jurisdictions. Fifty-one surveys were disseminated, with 34 returned. The surveys returned covered 14 of the 15 jurisdictions invited to participate. The majority (71%) of countries update the patient classification system and/or payment tariffs on an annual basis to try to account for new technologies. Use of short-term separate or supplementary payments for new technologies occurs in 79% of countries to ensure adequate funding and facilitate adoption. A minority (43%) of countries use evidence of therapeutic benefit and/or costs to determine or update payment tariffs, although it is somewhat more common in establishing short-term payments. The main barrier to using evidence is uncertain or unavailable clinical evidence. Almost three-fourths of respondents believed diagnosis-related group systems incentivize or deter technology adoption, depending on the particular circumstances. Improvements are needed, such as enhanced strategies for evidence generation and linking evidence of value to payments, national and international collaboration and training to improve existing practice, and flexible timelines for short-term payments. Importantly, additional research is needed to understand how different payment policies impact technology uptake as well as quality of care and costs.

  16. What aspects of the health technology assessment process recommended by international health technology assessment agencies received the most attention in Poland in 2008?

    Science.gov (United States)

    Kolasa, Katarzyna; Dziomdziora, Malgorzata; Fajutrao, Liberty

    2011-01-01

    The primary objective of this study was to determine the extent to which international standards on transparency and quality are met by the health technology assessment (HTA) process in Poland. A secondary objective is to describe the outcomes of the HTA process and their associated factors. All published online HTA appraisal and meeting proceedings on pharmaceutical products in 2008 were reviewed using a score card developed from international checklists recommended by INAHTA and ECHTA. The sixty-nine reports reviewed showed that five of nine transparency standards and six of eight quality standards were usually met by the HTA reports. Areas for improvement for transparency include inputs from external stakeholders, availability of English summaries, conclusions, implications of results, and suggested program of action. Areas of improvement for quality include appropriateness of target population and comparator/s, sufficiency of evidence on efficacy and safety, methodological rigor, economic model assumptions, and adaptation to the Polish setting. A consideration of the ethical and social consequences to the healthcare system must also be strengthened. The study demonstrates that the incorporation and implementation of the HTA appraisal process in Poland has been successful. HTA appraisal reports in Poland have considered most of the international standards of transparency and quality. Recommendations for both HTA users and doers are forwarded for the improvement of the HTA process in the Polish setting.

  17. Emissions from international shipping: 2. Impact of future technologies on scenarios until 2050

    Science.gov (United States)

    Eyring, V.; KöHler, H. W.; Lauer, A.; Lemper, B.

    2005-09-01

    In this study the today's fleet-average emission factors of the most important ship exhausts are used to calculate emission scenarios for the future. To develop plausible future technology scenarios, first upcoming regulations and compliance with future regulations through technological improvements are discussed. We present geographically resolved emission inventory scenarios until 2050, based on a mid-term prognosis for 2020 and a long-term prognosis for 2050. The scenarios are based on some very strict assumptions on future ship traffic demands and technological improvements. The four future ship traffic demand scenarios are mainly determined by the economic growth, which follows the IPCC SRES storylines. The resulting fuel consumption is projected through extrapolations of historical trends in economic growth, total seaborne trade and number of ships, as well as the average installed power per ship. For the future technology scenarios we assume a diesel-only fleet in 2020 resulting in fuel consumption between 382 and 409 million metric tons (Mt). For 2050 one technology scenario assumes that 25% of the fuel consumed by a diesel-only fleet can be saved by applying future alternative propulsion plants, resulting in a fuel consumption that varies between 402 and 543 Mt. The other scenario is a business-as-usual scenario for a diesel-only fleet even in 2050 and gives an estimate between 536 and 725 Mt. Dependent on how rapid technology improvements for diesel engines are introduced, possible technology reduction factors are applied to the today's fleet-average emission factors of all important species to estimate future ship emissions. Combining the four traffic demand scenarios with the four technology scenarios, our results suggest emissions between 8.8 and 25.0 Tg (NO2) in 2020, and between 3.1 to 38.8 Tg (NO2) in 2050. The development of forecast scenarios for CO2, NOx, SOx, CO, hydrocarbons, and particulate matter is driven by the requirements for global model

  18. Challenges, Strategies and Techniques for International Training in Technology for Cultural Heritage Conservation

    Science.gov (United States)

    Eppich, R.; Almagro Vidal, A.

    2013-07-01

    Technology to document and investigate cultural heritage sites is rapidly advancing - multispectral and high dynamic range imaging, spherical high resolution photography, three-dimensional laser scanning and unmanned aerial vehicles are only a few of the new technologies available to heritage conservation professionals to record monuments, buildings, city centres and landscapes. These advanced tools are giving architects, engineers and conservation professionals' new insights and additional information which helps to make better informed decisions. But this technology and the knowledge about its correct use are extremely unevenly distributed across the world. The Digital Divide is present and growing in the field of cultural heritage preservation (Letellier, 2001). Many of those responsible for the management, maintenance and care of some of the world's most significant cultural heritage sites do not have access to or information about the latest technologies. They are also confronted with an overwhelming assortment of new technologies and consultants or developers that promote them and therefore must allocate their limited budgets with limited information. What is to be done about bridging this gap? Obviously cost and accessibility are issues. However one of the most important challenges to be addressed is education. As the base knowledge of these technologies is very uneven this leads to further questions: Are there strategies or methodologies for teaching this technology? How to combine and balance different professional backgrounds from different and so unevenly distributed places around the world and provide them all with useful information to make good documentation and conservation decisions? This paper will describe the methodology developed over the last ten years in teaching documentation technologies to diverse groups of cultural heritage professionals and students from Côte d'Ivoire, Germany, Belgium, Kosovo, Albania, Nigeria, Egypt, Japan, Iraq

  19. Crosscutting Issues in International Transformation: Interactions and Innovations among People, Organizations, Processes, and Technology

    Science.gov (United States)

    2009-12-01

    leaders, U.S. entities, and international players. For example, the number of projected homeless may need to be adjusted based on local knowledge, and...Federation was broken into two parties—the mostly Chinese Singapore seceded from the Federation in 1965, making Malaysia Malayan.29 More or less

  20. On International Cooperation and the Fluminense Federal Institute of Education, Science and Technology

    Directory of Open Access Journals (Sweden)

    Maria Inês Albernaz Kury

    2012-10-01

    Full Text Available This article aims to make a reflection about the need for internationalization of our institution and our own as well as an approach to the theme of International Cooperation and its meaning in the current scenario. This is a compilation of some documents and readings related to the themes in question.

  1. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: IN-DRAIN TREATMENT DEVICE. HYDRO INTERNATIONAL UP-FLO™ FILTER

    Science.gov (United States)

    Verification testing of the Hydro International Up-Flo™ Filter with one filter module and CPZ Mix™ filter media was conducted at the Penn State Harrisburg Environmental Engineering Laboratory in Middletown, Pennsylvania. The Up-Flo™ Filter is designed as a passive, modular filtr...

  2. Proceedings of the international symposium on alcohol fuel technology: methanol and ethanol

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-07-01

    The papers presented dealt with the following topics: international situation and economic and political aspects, use of alcohol fuels as automotive fuels, production of methanol and methyl fuels, production of ethanol, methanol application and modeling, alcohol fuel optimization, and environmental considerations. Each paper was prepared for introduction into the EDB data base. (JSR)

  3. Potato production and innovative technologies. Proceedings Potato Russia International Conference, Moscou Agust 21-22, 2007

    NARCIS (Netherlands)

    Haverkort, A.J.; Anisimov, B.V.

    2007-01-01

    This comprehensive book is the result of the Potato Russia international conference that took place in August 2007 in Moscow. It begins with a series of papers that give an excellent overview of consumer behaviour and marketing with examples from various countries in the world. The quality of

  4. International Working Group on Water Reactor Fuel Performance and Technology. Summary report of the 14. plenary meeting. Working material

    International Nuclear Information System (INIS)

    1997-01-01

    The fourteenth Plenary Meeting of the International Working Group on Water Reactor Fuel Performance and Technology (IWGFPT) was held at IAEA Headquarters, Vienna, from 21 to 23 May 1997. Twenty-seven participants, from twenty two Member States and two international organizations, attended the meeting. These presentations generally gave: The general situation of the nuclear industry in the country; Fuel fabrication; Fuel performance, high burnup fuel (including MOX) operational experience; Status and trends in fuel research programmes directed to achievement sufficient safety margins at high burnups with regard to normal and transient operational conditions. Majority of countries reported on the stable situation of the nuclear fuel industry, i.e. without significant additions/cuts in nuclear power plant and fuel fabrication plant (NPP) capacities. Refs, figs, tabs

  5. Heat transfer technology for internal passages of air-cooled blades for heavy-duty gas turbines.

    Science.gov (United States)

    Weigand, B; Semmler, K; von Wolfersdorf, J

    2001-05-01

    The present review paper, although far from being complete, aims to give an overview about the present state of the art in the field of heat transfer technology for internal cooling of gas turbine blades. After showing some typical modern cooled blades, the different methods to enhance heat transfer in the internal passages of air-cooled blades are discussed. The complicated flows occurring in bends are described in detail, because of their increasing importance for modern cooling designs. A short review about testing of cooling design elements is given, showing the interaction of the different cooling features as well. The special focus of the present review has been put on the cooling of blades for heavy-duty gas turbines, which show several differences compared to aero-engine blades.

  6. International attitudes of early adopters to current and future robotic technologies in pediatric surgery.

    Science.gov (United States)

    Cundy, Thomas P; Marcus, Hani J; Hughes-Hallett, Archie; Najmaldin, Azad S; Yang, Guang-Zhong; Darzi, Ara

    2014-10-01

    Perceptions toward surgical innovations are critical to the social processes that drive technology adoption. This study aims to capture attitudes of early adopter pediatric surgeons toward robotic technologies in order to clarify 1) specific features that are driving appeal, 2) limiting factors that are acting as diffusion barriers, and 3) future needs. Electronic surveys were distributed to pediatric surgeons with personal experience or exposure in robotic surgery. Participants were classified as experts or nonexperts for subgroup analysis. Coded Likert scale responses were analyzed using the Friedman or Mann-Whitney test. A total of 48 responses were received (22 experts, 26 nonexperts), with 14 countries represented. The most highly rated benefits of robot assistance were wristed instruments, stereoscopic vision, and magnified view. The most highly rated limitations were capital outlay expense, instrument size, and consumables/maintenance expenses. Future technologies of greatest interest were microbots, image guidance, and flexible snake robots. Putative benefits and limitations of robotic surgery are perceived with widely varied weightings. Insight provided by these responses will inform relevant clinical, engineering, and industry groups such that unambiguous goals and priorities may be assigned for the future. Pediatric surgeons seem most receptive toward technology that is smaller, less expensive, more intelligent and flexible. Copyright © 2014 Elsevier Inc. All rights reserved.

  7. Joint and Cross-border Patents as Proxies for International Technology Diffusion

    NARCIS (Netherlands)

    C-L. Chang (Chia-Lin); M.J. McAleer (Michael); J-T. Tang (Ju-Ting)

    2016-01-01

    markdownabstractWith the advent of globalization, economic and financial interactions among countries have become widespread. Given technological advancements, the factors of production can no longer be considered to be just labor and capital. In the pursuit of economic growth, every country has

  8. Science and technology related global problems: An international survey of science educators

    Science.gov (United States)

    Bybee, Rodger W.; Mau, Teri

    This survey evaluated one aspect of the Science-Technology-Society theme, namely, the teaching of global problems related to science and technology. The survey was conducted during spring 1984. Two hundred sixty-two science educators representing 41 countries completed the survey. Response was 80%. Findings included a ranking of twelve global problems (the top six were: World Hunger and Food Resources, Population Growth, Air Quality and Atmosphere, Water Resources, War Technology, and Human Health and Disease). Science educators generally indicated the following: the science and technology related global problems would be worse by the year 2000; they were slightly or moderately knowledgeable about the problems; print, audio-visual media, and personal experiences were their primary sources of information; it is important to study global problems in schools; emphasis on global problems should increase with age/grade level; an integrated approach should be used to teach about global problems; courses including global problems should be required of all students; most countries are in the early stages of developing programs including global problems; there is a clear trend toward S-T-S; there is public support for including global problems; and, the most significant limitations to implementation of the S-T-S theme (in order of significance) are political, personnel, social, psychological, economic, pedagogical, and physical. Implications for research and development in science education are discussed.

  9. Creative and Playful Learning on Technology-Enriched Playgrounds: An International Investigation

    Science.gov (United States)

    Randolph, Justus J.; Kangas, Marjaana; Ruokamo, Heli; Hyvönen, Pirkko

    2016-01-01

    The purpose of this quasi-experimental study was to determine the degree that creative and playful learning (CPL) in a technology-enriched playground influences academic achievement of students and what factors are responsible for successes. The participants were 276 students from 12 elementary classrooms in the Netherlands and Finland. The…

  10. International Conference on Applications of Photonic Technology, Communications, Sensing, Materials and Signal Processing

    CERN Document Server

    Lessard, Roger; ICAPT '96; Applications of photonic technology 2

    1997-01-01

    This book presents a current review ofphotonic technologies and their applications. The papers published in this book are extended versions of the papers presented at the Inter­ national Conference on Applications ofPhotonic Technology (ICAPT'96) held in Montreal, Canada, on July 29 to August 1, 1996. The theme of this event was "Closing the Gap Between Theory, Developments and Applications. " The term photonics covers both optics and optical engineering areas of growing sci­ entific and commercial importance throughout the world. It is estimated that photonic tech­ nology-related applications to increase exponentially over the next few years and will play a significant role in the global economy by reaching a quarter of a trillion of US dollars by the year 2000. The global interest and advancements of this technology are represented in this book, where leading scientists of twenty-two countries with advanced technology in photon­ ics present their latest results. The papers selected herein are ...

  11. Social Networks As Internet-technologies in Electoral Campaigns: the International View

    Directory of Open Access Journals (Sweden)

    Александр Александрович Свинин

    2013-12-01

    Full Text Available Social networks as internet-technologies became a useful instrument for politicians during the electoral campaigns. The main reason for that is the fact that social networks today are the next step in development of communications between people. In the article the author investigates the history of social networks, different cases of application of social networks in electoral campaigns.

  12. Information and Communication Technology in the International Business Classroom: Comparing Faculty and Student Perspectives

    Science.gov (United States)

    Van Deusen, Cheryl A.; Jones, Gordon; Mueller, Carolyn B.; Ricks, David A.; Schlegelmilch, Bodo B.

    2004-01-01

    The use of information and communication technology (ICT) is revolutionizing traditional educational methods in university contexts and changing the process of how educators do their jobs. However, research offers conflicting views regarding the benefits of ICT in the classroom. To better understand the various advantages and disadvantages of…

  13. Concepts and contexts in engineering and technology education : An international and interdisciplinary Delphi study

    NARCIS (Netherlands)

    Rossouw, A.; Hacker, M.; De Vries, M.J.

    2010-01-01

    Inspired by a similar study by Osborne et al. we have conducted a Delphi study among experts to identify key concepts to be taught in engineering and technology education and relevant and meaningful contexts through which these concepts can be taught and learnt. By submitting the outcomes of the

  14. Bridging the Hemispheres through the Use of Technology: International Collaboration in Social Work Training

    Science.gov (United States)

    Rautenbach, John Victor; Black-Hughes, Christine

    2012-01-01

    The social work programs of the University of Fort Hare, East London, South Africa, and Minnesota State University, Mankato, United States, began using various technologies in 2007 to facilitate interaction. This project included conducting practicum supervision and seminars via videoconferencing (using Breeze, Adobe Connect, and Skype) and…

  15. The Processes and Effects of an Internal Technology Discovery Program upon Management.

    Science.gov (United States)

    Schuelke, L. David

    This paper summarizes the results of a field study conducted by the Center for Research in Scientific Communication at the University of Minnesota, Saint Paul, which concerned the effects of a technology-monitoring program on communication activities, behaviors, and attitudes of employees at a multinational, Minneapolis-based company. It was…

  16. Mathematics Teachers' Use of Information and Communication Technologies: An International Comparison

    Science.gov (United States)

    Kiru, Elisheba W.

    2018-01-01

    There is an urgent need to understand how often teachers use information and communication technologies (ICT) in mathematics instruction. This information can provide vital links that can help stakeholders make connections about ICT use in mathematics instruction and student learning experiences with ICT. Scholars in the field have reported on the…

  17. The political economy of negative emissions technologies: consequences for international policy design

    NARCIS (Netherlands)

    Honegger, Matthias; Reiner, David

    2018-01-01

    Negative emissions technologies (NETs), especially bioenergy with carbon capture and storage and direct air capture and storage, have been invoked as necessary to achieve the aspirational 1.5°C target of the Paris Agreement. However, currently their costs are estimated to be very high, NETs do not

  18. Proceedings of the sixteenth international conference on coal and slurry technologies

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    The proceedings of this conference are grouped under the following headings: Update in operating slurry pipeline systems; Environmental aspects; Materials and equipment; Indirect coal, liquefaction, Pipeline technology; Coal preparation and beneficiation; Direct coal liquefaction; Rheology characterization and formulation; Atomization and combustion; Demonstrations and evaluations; Small scale applications

  19. International symposium on radiation technology in emerging industrial applications. Book of extended synopses

    International Nuclear Information System (INIS)

    2000-11-01

    The book contains 116 extended synopses of the oral and poster presentations delivered at the symposium. They present advances in radiation processing technology including radiosterilization and radiolysis of toxic wastes; radiosterilization of food, cosmetics and medical supplies; radiation assisted synthesis of polymer materials; design of gamma irradiation devices and accelerators for electron beam processing. Each of the papers was indexed separately

  20. International Conference on Fast Reactors and Related Fuel Cycles: Safe Technologies and Sustainable Scenarios (FR13). Presentations

    International Nuclear Information System (INIS)

    2013-01-01

    The conference, which was held from 4 to 7 of March 2013 in Paris, provided a forum to exchange information on national and international programmes, and more generally new developments and experience, in the field of fast reactors and related fuel cycle technologies. A first goal was to identify and discuss strategic and technical options that have been proposed by individual countries or companies. Another goal was to promote the development of fast reactors and related fuel cycle technologies in a safe, proliferation resistant and economic way. A third goal was to identify gaps and key issues that need to be addressed in relation to the industrial deployment of fast reactors with a closed fuel cycle. A fourth goal was to engage young scientists and engineers in this field, in particular with sustainability, innovation, simulation, safety, economics and public acceptance