WorldWideScience

Sample records for technology separate abstracts

  1. Nineteenth annual actinide separations conference: Conference program and abstracts

    International Nuclear Information System (INIS)

    Bronson, M.

    1995-01-01

    This report contains the abstracts from the conference presentations. Sessions were divided into the following topics: Waste treatment; Spent fuel treatment; Issues and responses to Defense Nuclear Facility Safety Board 94-1; Pyrochemical technologies; Disposition technologies; and Aqueous separation technologies

  2. Nineteenth annual actinide separations conference: Conference program and abstracts

    Energy Technology Data Exchange (ETDEWEB)

    Bronson, M. [ed.

    1995-12-31

    This report contains the abstracts from the conference presentations. Sessions were divided into the following topics: Waste treatment; Spent fuel treatment; Issues and responses to Defense Nuclear Facility Safety Board 94-1; Pyrochemical technologies; Disposition technologies; and Aqueous separation technologies.

  3. Separation science and technology

    International Nuclear Information System (INIS)

    Smith, B.F.; Sauer, N.; Chamberlin, R.M.; Gottesfeld, S.; Mattes, B.R.; Li, D.Q.; Swanson, B.

    1998-01-01

    The focus of this project is the demonstration and advancement of membrane-based separation and destruction technologies. The authors are exploring development of membrane systems for gas separations, selective metal ion recovery, and for separation or destruction of hazardous organics. They evaluated existing polymers and polymer formulations for recovery of toxic oxyanionic metals such as chromate and arsenate from selected waste streams and developed second-generation water-soluble polymeric systems for highly selective oxyanion removal and recovery. They optimized the simultaneous removal of radioactive strontium and cesium from aqueous solutions using the new nonhazardous separations agents, and developed recyclable, redox-active extractants that permitted recovery of the radioactive ions into a minimal waste volume. They produced hollow fibers and fabricated prototype hollow-fiber membrane modules for applications to gas separations and the liquid-liquid extraction and recovery of actinides and nuclear materials from process streams. They developed and fabricated cyclodextrin-based microporous materials that selectively absorb organic compounds in an aqueous environment; the resultant products gave pure water with organics at less than 0.05 parts per billion. They developed new, more efficient, membrane-based electrochemical reactors for use in organic destruction in process waste treatment. They addressed the need for advanced oxidation technologies based on molecular-level materials designs that selectively remove or destroy target species. They prepared and characterized surface-modified TiO 2 thin films using different linking approaches to attach ruthenium photosensitizers, and they started the measurement of the photo-degradation products generated using surface modified TiO 2 films in reaction with chlorophenol

  4. Separation science and technology

    Energy Technology Data Exchange (ETDEWEB)

    Smith, B.F.; Sauer, N.; Chamberlin, R.M.; Gottesfeld, S.; Mattes, B.R.; Li, D.Q.; Swanson, B.

    1998-12-31

    The focus of this project is the demonstration and advancement of membrane-based separation and destruction technologies. The authors are exploring development of membrane systems for gas separations, selective metal ion recovery, and for separation or destruction of hazardous organics. They evaluated existing polymers and polymer formulations for recovery of toxic oxyanionic metals such as chromate and arsenate from selected waste streams and developed second-generation water-soluble polymeric systems for highly selective oxyanion removal and recovery. They optimized the simultaneous removal of radioactive strontium and cesium from aqueous solutions using the new nonhazardous separations agents, and developed recyclable, redox-active extractants that permitted recovery of the radioactive ions into a minimal waste volume. They produced hollow fibers and fabricated prototype hollow-fiber membrane modules for applications to gas separations and the liquid-liquid extraction and recovery of actinides and nuclear materials from process streams. They developed and fabricated cyclodextrin-based microporous materials that selectively absorb organic compounds in an aqueous environment; the resultant products gave pure water with organics at less than 0.05 parts per billion. They developed new, more efficient, membrane-based electrochemical reactors for use in organic destruction in process waste treatment. They addressed the need for advanced oxidation technologies based on molecular-level materials designs that selectively remove or destroy target species. They prepared and characterized surface-modified TiO{sub 2} thin films using different linking approaches to attach ruthenium photosensitizers, and they started the measurement of the photo-degradation products generated using surface modified TiO{sub 2} films in reaction with chlorophenol.

  5. Innovative Separations Technologies

    Energy Technology Data Exchange (ETDEWEB)

    J. Tripp; N. Soelberg; R. Wigeland

    2011-05-01

    Reprocessing used nuclear fuel (UNF) is a multi-faceted problem involving chemistry, material properties, and engineering. Technology options are available to meet a variety of processing goals. A decision about which reprocessing method is best depends significantly on the process attributes considered to be a priority. New methods of reprocessing that could provide advantages over the aqueous Plutonium Uranium Reduction Extraction (PUREX) and Uranium Extraction + (UREX+) processes, electrochemical, and other approaches are under investigation in the Fuel Cycle Research and Development (FCR&D) Separations Campaign. In an attempt to develop a revolutionary approach to UNF recycle that may have more favorable characteristics than existing technologies, five innovative separations projects have been initiated. These include: (1) Nitrogen Trifluoride for UNF Processing; (2) Reactive Fluoride Gas (SF6) for UNF Processing; (3) Dry Head-end Nitration Processing; (4) Chlorination Processing of UNF; and (5) Enhanced Oxidation/Chlorination Processing of UNF. This report provides a description of the proposed processes, explores how they fit into the Modified Open Cycle (MOC) and Full Recycle (FR) fuel cycles, and identifies performance differences when compared to 'reference' advanced aqueous and fluoride volatility separations cases. To be able to highlight the key changes to the reference case, general background on advanced aqueous solvent extraction, advanced oxidative processes (e.g., volumetric oxidation, or 'voloxidation,' which is high temperature reaction of oxide UNF with oxygen, or modified using other oxidizing and reducing gases), and fluorination and chlorination processes is provided.

  6. Separation of Ionic Solutes: Abstracts of the sixth international conference

    International Nuclear Information System (INIS)

    1995-05-01

    The publication has been set up as a abstracts of the international conference dealing with separation of ionic solutes. The book consists of the sections: (A) Theory of solutions and processes; (B) Solvent extraction, liquid membranes and biphasic separations; (C) Capillary electrophoresis and isotachophoresis; (D) Selective and natural sorbents; (E) Fractionation of radionuclides and metals in natural systems - transfer and speciation

  7. Center for Advanced Separation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, Rick

    2013-09-30

    The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, CAST is now a five-university consortium – Virginia Tech, West Virginia University, University of Kentucky, University of Utah and Montana Tech, - that is supported through U.S. DOE Cooperative Agreement No. DE-FE0000699, Center for Advanced Separation Technology. Much of the research to be conducted with Cooperative Agreement funds will be longer term, high-risk, basic research and will be carried out in two broad areas: Advanced Pre-Combustion Clean Coal Technologies and Gas-Gas Separations. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the five member universities. These were reviewed and the selected proposals were forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed below by category, along with abstracts from their final reports.

  8. Entrepreneurial separation to transfer technology.

    Energy Technology Data Exchange (ETDEWEB)

    Fairbanks, Richard R.

    2010-09-01

    Entrepreneurial separation to transfer technology (ESTT) program is that entrepreneurs terminate their employment with Sandia. The term of the separation is two years with the option to request a third year. Entrepreneurs are guaranteed reinstatement by Sandia if they return before ESTT expiration. Participants may start up or helpe expand technology businesses.

  9. Current Abstracts Nuclear Reactors and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Bales, J.D.; Hicks, S.C. [eds.

    1993-01-01

    This publication Nuclear Reactors and Technology (NRT) announces on a monthly basis the current worldwide information available from the open literature on nuclear reactors and technology, including all aspects of power reactors, components and accessories, fuel elements, control systems, and materials. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency`s Energy Technology Data Exchange or government-to-government agreements. The digests in NRT and other citations to information on nuclear reactors back to 1948 are available for online searching and retrieval on the Energy Science and Technology Database and Nuclear Science Abstracts (NSA) database. Current information, added daily to the Energy Science and Technology Database, is available to DOE and its contractors through the DOE Integrated Technical Information System. Customized profiles can be developed to provide current information to meet each user`s needs.

  10. China nuclear science and technology report. Abstracts

    International Nuclear Information System (INIS)

    1994-01-01

    The bibliographies and abstracts of China Nuclear Science and Technology Reports published in 1993 (Report Numbers CNIC-00675∼CNIC-00800) are presented. The items are arranged according to INIS subject categories, which mainly are physical sciences, chemistry, materials, earth sciences, life sciences, isotopes, isotope and radiation applications, engineering and technology, and other aspects of nuclear energy. The numbers on the left corners of the entries are report numbers, and on the right corners the serial numbers. A report number index is annexed

  11. Separation technology 2005; Separasjonsteknologi 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    The conference comprises 13 presentations on the topics of separation technology aspects with emphasis on technology assessment. Some topics of particular interest are emulsion stabilization, sand technology and handling, water handling and reservoir injection, technical equipment and compression and pressure aspects.

  12. Acoustic Separation Technology; FINAL

    International Nuclear Information System (INIS)

    Fred Ahrens; Tim Patterson

    2002-01-01

    Today's restrictive environmental regulations encourage paper mills to close their water systems. Closed water systems increase the level of contaminants significantly. Accumulations of solid suspensions are detrimental to both the papermaking process and the final products. To remove these solids, technologies such as flotation using dissolved air (DAF), centrifuging, and screening have been developed. Dissolved Air Flotation systems are commonly used to clarify whitewater. These passive systems use high pressure to dissolve air into whitewater. When the pressure is released, air micro-bubbles form and attach themselves to fibers and particles, which then float to the surface where they are mechanically skimmed off. There is an economic incentive to explore alternatives to the DAF technology to drive down the cost of whitewater processing and minimize the use of chemicals. The installed capital cost for a DAF system is significant and a typical DAF system takes up considerable space. An alternative approach, which is the subject of this project, involves a dual method combining the advantages of chemical flocculation and in-line ultrasonic clarification to efficiently remove flocculated contaminants from a water stream

  13. Development of Radiochemical Separation Technology

    International Nuclear Information System (INIS)

    Lee, Eil Hee; Kim, K. W.; Yang, H. B.

    2007-06-01

    This project of the second phase was aimed at the development of basic unit technologies for advanced partitioning, and the application tests of pre-developed partitioning technologies for separation of actinides by using a simulated multi-component radioactive waste containing Am, Np, Tc, U and so on. The goals for recovery yield of TRU, and for purity of Tc are high than 99% and about 99%, respectively. The work scopes and contents were as follows. 1). For the development of basic unit technologies for advanced partitioning. 1. Development of technologies for co-removal of TRU and for mutual separation of U and TRU with a reduction-complexation reaction. 2. Development of extraction system for high-acidity co-separation of An(+3) and Ln(+3) and its radiolytic evaluation. 3. Synthesis of extractants for the selective separation of An(+3) and its relevant extraction system development. 4. Development of a hybrid system for the recovery of noble metals and its continuous separation tests. 5. Development of electrolytic system for the decompositions of N-NO3 and N-NH3 compounds to nitrogen gas. 2). For the application test of pre-developed partitioning technologies for the separation of actinide elements in a simulated multi-component solution equivalent to HLW level. 1. Co-separation of Tc, Np and U by a (TBP-TOA)/NDD system. 2. Mutual-separation of Am, Cm and RE elements by a (Zr-DEHPA)/NDD system. All results will be used as the fundamental data for the development of advanced partitioning process in the future

  14. Development of Radiochemical Separation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eil Hee; Kim, K. W.; Yang, H. B. (and others)

    2007-06-15

    This project of the second phase was aimed at the development of basic unit technologies for advanced partitioning, and the application tests of pre-developed partitioning technologies for separation of actinides by using a simulated multi-component radioactive waste containing Am, Np, Tc, U and so on. The goals for recovery yield of TRU, and for purity of Tc are high than 99% and about 99%, respectively. The work scopes and contents were as follows. 1). For the development of basic unit technologies for advanced partitioning. 1. Development of technologies for co-removal of TRU and for mutual separation of U and TRU with a reduction-complexation reaction. 2. Development of extraction system for high-acidity co-separation of An(+3) and Ln(+3) and its radiolytic evaluation. 3. Synthesis of extractants for the selective separation of An(+3) and its relevant extraction system development. 4. Development of a hybrid system for the recovery of noble metals and its continuous separation tests. 5. Development of electrolytic system for the decompositions of N-NO3 and N-NH3 compounds to nitrogen gas. 2). For the application test of pre-developed partitioning technologies for the separation of actinide elements in a simulated multi-component solution equivalent to HLW level. 1. Co-separation of Tc, Np and U by a (TBP-TOA)/NDD system. 2. Mutual-separation of Am, Cm and RE elements by a (Zr-DEHPA)/NDD system. All results will be used as the fundamental data for the development of advanced partitioning process in the future.

  15. Promoting Economic Security through Information Technology Abstract

    African Journals Online (AJOL)

    PROF. O. E. OSUAGWU

    2013-12-01

    Dec 1, 2013 ... Abstract. The problem of economic insecurity is a global threat to national security. In Nigeria today, we have witness a lot of national security issues that risks the continued existence of the country as one indivisible political entity with many calling for disintegration. Hitherto, many terrorist networks have ...

  16. Promoting Economic Security through Information Technology Abstract

    African Journals Online (AJOL)

    PROF. O. E. OSUAGWU

    2013-12-01

    Dec 1, 2013 ... a major component of economic growth and innovation in other areas of society and the economy. As the President's. Council of Advisors on Science and. Technology acknowledged in ... America's security, economy, and quality of life, The .... Sharing will greatly improve the ability of the security agencies ...

  17. Separation process using microchannel technology

    Science.gov (United States)

    Tonkovich, Anna Lee [Dublin, OH; Perry, Steven T [Galloway, OH; Arora, Ravi [Dublin, OH; Qiu, Dongming [Bothell, WA; Lamont, Michael Jay [Hilliard, OH; Burwell, Deanna [Cleveland Heights, OH; Dritz, Terence Andrew [Worthington, OH; McDaniel, Jeffrey S [Columbus, OH; Rogers, Jr; William, A [Marysville, OH; Silva, Laura J [Dublin, OH; Weidert, Daniel J [Lewis Center, OH; Simmons, Wayne W [Dublin, OH; Chadwell, G Bradley [Reynoldsburg, OH

    2009-03-24

    The disclosed invention relates to a process and apparatus for separating a first fluid from a fluid mixture comprising the first fluid. The process comprises: (A) flowing the fluid mixture into a microchannel separator in contact with a sorption medium, the fluid mixture being maintained in the microchannel separator until at least part of the first fluid is sorbed by the sorption medium, removing non-sorbed parts of the fluid mixture from the microchannel separator; and (B) desorbing first fluid from the sorption medium and removing desorbed first fluid from the microchannel separator. The process and apparatus are suitable for separating nitrogen or methane from a fluid mixture comprising nitrogen and methane. The process and apparatus may be used for rejecting nitrogen in the upgrading of sub-quality methane.

  18. Nuclear Wastes: Technologies for Separations and Transmutation

    National Research Council Canada - National Science Library

    .... The committee examines the currently used "once-through" fuel cycle versus different alternatives of separations and transmutation technology systems, by which hazardous radionuclides are converted...

  19. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher Hull

    2009-10-31

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed by category, along with brief abstracts of their aims and objectives.

  20. Separation science and technology: an ORNL perspective

    International Nuclear Information System (INIS)

    Pruett, D.J.

    1986-05-01

    This report was prepared as a summary of a fourfold effort: (1) to examine schemes for defining and categorizing the field of separation science and technology; (2) to review several of the major categories of separation techniques in order to determine the most recent developments and future research needs; (3) to consider selected problems and programs that require advances in separation science and technology as a part of their solution; and (4) to propose suggestions for new directions in separation research at Oak Ridge National Laboratory (ORNL)

  1. ABSTRACT

    African Journals Online (AJOL)

    University Health Services. Ahmadu Bella University, Zaria, Nigeria. ABSTRACT. Phywieo-chemical methods were used to analyse the commonly used lcualt samples bought from Zaria and Kano local markets. Blood-leadaoncentrations in ltuali ...

  2. China nuclear science and technology report: Abstracts, 1992

    International Nuclear Information System (INIS)

    1992-04-01

    The bibliographies and abstracts of China Nuclear Science and Technology Reports published in 1992 (Report Numbers CNIC-00555 ∼ CNIC-00674) are presented. The items are arranged according to INIS subject categories, which mainly are physics, chemistry, materials, earth sciences, life sciences, engineering and technology, and other aspects of nuclear energy. The numbers on the left corners of the entries are report numbers, and on the right corners the serial numbers. A report number index is annexed

  3. Abstracts: China Nuclear Science and Technology Report (1989)

    International Nuclear Information System (INIS)

    1990-04-01

    The bibliographies and abstracts of China Nuclear Science and Technology Report published in 1989 (Report Numbers CNIC--00255∼CNIC--00354) are presented. The items are arranged according to INIS subject categories, which mainly are physics, chemistry, materials, earth sciences, life sciences, isotopes, isotope and radiation applications, engineering and technology, and other aspects of nuclear energy. The numbers on the left corners of the entries are report numbers, and on the right corners the serial numbers. A report number index is annexed

  4. Abstracts China nuclear science and technology reports (1988)

    International Nuclear Information System (INIS)

    1989-03-01

    The bibliographies and abstracts of China Nuclear Science and Technology Reports published in 1988 (Report Numbers CNIC -00115 ∼ CNIC-00254) are presented. The items are arranged according to INIS subject categories, which mainly are physics, chemistry, materials, earth sciences, life sciences, isotopes, isotope and radiation applications, engineering and technology, and other aspects of nuclear energy. The numbers on the left corners of the entries are report numbers, and on the right corners the serial numbers. A report number index is annexed

  5. Abstracts China nuclear science and technology report (1999)

    International Nuclear Information System (INIS)

    2001-01-01

    The bibliographies and abstracts of China Nuclear Science and Technology Reports published in 1999 (Report Numbers CNIC-01331 -CNIC-01430) are presented. The items are arranged according to INIS subject categories, which mainly are physical sciences, chemistry, materials, earth sciences, life sciences, isotopes, isotope and radiation applications, engineering and technology, and other aspects of nuclear energy. The numbers on the left corners of the entries are report numbers, and on the right corners the serial numbers. A report number index is annexed

  6. Abstracts: China Nuclear Science and Technology Report (1990)

    International Nuclear Information System (INIS)

    1991-05-01

    The bibliographies and abstracts of China Nuclear Science and Technology Reports published in 1990 (Report Numbers CNIC--00355 to CNIC-00454) are presented. The items are arranged according to INIS subjects categories, which mainly are physics, chemistry, materials, earth sciences, isotopes, isotope and radiation applications, engineering and technology, and other aspects of nuclear energy. The numbers on the left corners of the entries are report numbers, and on the right corners the serial numbers. A report number index is annexed

  7. Abstracts of China Nuclear Science and Technology Report (1998)

    International Nuclear Information System (INIS)

    1999-09-01

    The bibliographies and abstracts of China Nuclear Science and Technology Reports published in 1998 (Report Numbers CNIC-01231-CNIC-01330) are presented. The items are arranged according to INIS subject categories, which mainly are physical sciences, chemistry, materials, earth sciences, life sciences, isotopes, isotope and radiation applications, engineering and technology, and other aspects of nuclear energy. The numbers on the left corners of the entries are report numbers, and on the right corners the serial numbers. A report number index is annexed

  8. China nuclear science and technology report (1991). Abstracts

    International Nuclear Information System (INIS)

    1992-04-01

    The bibliographies and abstracts of China Nuclear Science and Technology Reports published in 1991 (Report Numbers CNIC-00455 to CNIC-00554) are presented. The items are arranged according to INIS subject categories, which mainly are physics, chemistry, materials, earth sciences, life sciences, isotopes, isotope and radiation applications, engineering and technology, and other aspects of nuclear energy. The numbers on the left corners of the entries are report numbers, and on the right corners the serial numbers. A report number index is annexed

  9. Cesium and Strontium Separation Technologies Literature Review

    Energy Technology Data Exchange (ETDEWEB)

    T. A. Todd; T. A. Todd; J. D. Law; R. S. Herbst

    2004-03-01

    Integral to the Advanced Fuel Cycle Initiative (AFCI) Program’s proposed closed nuclear fuel cycle, the fission products cesium and strontium in the dissolved spent nuclear fuel stream are to be separated and managed separately. A comprehensive literature survey is presented to identify cesium and strontium separation technologies that have the highest potential and to focus research and development efforts on these technologies. Removal of these high-heat-emitting fission products reduces the radiation fields in subsequent fuel cycle reprocessing streams and provides a significant short-term (100 yr) heat source reduction in the repository. This, along with separation of actinides, may provide a substantial future improvement in the amount of fuel that could be stored in a geologic repository. The survey and review of the candidate cesium and strontium separation technologies are presented herein. Because the AFCI program intends to manage cesium and strontium together, technologies that simultaneously separate both elements are of the greatest interest, relative to technologies that separate only one of the two elements.

  10. Formal Abstraction in Engineering Education--Challenges and Technology Support

    Science.gov (United States)

    Neuper, Walther A.

    2017-01-01

    This is a position paper in the field of Engineering Education, which is at the very beginning in Europe. It relates challenges in the new field to the emerging technology of (Computer) Theorem Proving (TP). Experience shows, that "teaching" abstract models, for instance the wave equation in mechanical engineering and in electrical…

  11. National conference on environmental remediation science and technology: Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This conference was held September 8--10, 1998 in Greensboro, North Carolina. The purpose of this conference was to provide a multidisciplinary forum for exchange of state-of-the-art information on methods and site characterization technologies for environmental monitoring and remedial action planning of hazardous materials. This report contains the abstracts of sixty-one papers presented at the conference.

  12. Thirty-seventh ORNL/DOE conference on analytical chemistry in energy technology: Abstracts of papers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    Abstracts only are given for papers presented during the following topical sessions: Opportunities for collaboration: Industry, academic, national laboratories; Developments in sensor technology; Analysis in containment facilities; Improving the quality of environmental data; Process analysis; Field analysis; Radiological separations; Interactive analytical seminars; Measurements and chemical industry initiatives; and Isotopic measurements and mass spectroscopy.

  13. Abstract

    African Journals Online (AJOL)

    Francis

    Abstract. Aqueous, methanol and chloroform extracts from the leaves of Ficus religiosa, Thespesia populnea and Hibiscus tiliaceus were completely screened for antibacterial and antifungal activity. The chloroform extract of F. religiosa possessed a broad spectrum of antibacterial activity with a zone of inhibition of 10 to 21 ...

  14. Abstract,

    African Journals Online (AJOL)

    Abstract·. A study was carried out to investigate the effect of overso~ing legumes on ~a~gela~d pe'rtormance in. Shinyanga'region, Tanzania. Four leguminous species namely Centrosema pubescence, Clito-':iii ternatea,. cMacroptilium atropurpureum and Stylosanthes hamata were Qversown in. a"natural ran,geland in a.

  15. Abstract

    Indian Academy of Sciences (India)

    65

    Abstract. For well over three hundred years, the monsoon has been considered to be a gigantic land-sea breeze driven by the land-ocean contrast in surface temperature. In this paper, this hypothesis ..... primary driver of the monsoon in many papers and most textbooks (e.g. Lau and Li, 1984,. Webster 1987a, Meehl 1994, ...

  16. ABSTRACT

    African Journals Online (AJOL)

    Email: jameskigera@yahoo.co.uk. ABSTRACT. Background: Implant orthopaedic surgery is associated with a risk of post operative Surgical Site. Infection (SSI). This can have devastating consequences in the case of arthroplasty. Due to the less than ideal circumstances under which surgery is conducted in Africa, there are ...

  17. Abstract

    African Journals Online (AJOL)

    WORKERS ON THEIR JOB PERFORMANCE IN IMO STATE, NIGERIA. NGOZI OKEREKE AND no. ONU. ABSTRACT. The study focused on the. efl'ect of socioeconomic characteristics of field extension workers on their job performance in.1mo state agricultural development programme, Nigeria. Data was collected with the ...

  18. Abstract

    African Journals Online (AJOL)

    PROF. OLIVER OSUAGWA

    Abstract. Many mathematical models of stochastic dynamical systems were based on the assumption that the drift and volatility coefficients were linear function of the solution. In this work, we arrive at the drift and the volatility by observing the dynamics of change in the selected stocks in a sufficiently small interval t∆ .

  19. Abstract

    African Journals Online (AJOL)

    dell

    the curriculum in higher education. In a similar way, major advances in biological, health sciences, social sciences, physical and life sciences, business and economics, and technology lead to revision of courses in the field. In line, with the everlasting explosion of knowledge and increasing sophistication of technology ...

  20. China nuclear science and technology report. Abstracts 1994

    International Nuclear Information System (INIS)

    1995-02-01

    The bibliographies and abstracts of China Nuclear Science and Technology Reports published in 1994 (Report Numbers CNIC-00801∼CNIC-00920) are presented. The items are arranged according to INIS subject categories, which mainly are physical sciences, chemistry, materials, earth sciences, life sciences, isotopes, isotope and radiation applications, engineering and technology, and other aspects of nuclear energy. The numbers on the left corners of the entries are report numbers, and on the right corners the serial numbers. A report number index is annexed

  1. China nuclear science and technology report 1995. Abstracts

    International Nuclear Information System (INIS)

    1996-03-01

    The bibliographies and abstracts of China Nuclear Science and Technology Reports published in 1995 (Report Numbers CNIC-00921∼CNIC-01020) are presented. The items are arranged according to INIS subject categories, which mainly are physical sciences, chemistry, materials, earth sciences, life sciences, isotopes, isotope and radiation applications, engineering and technology, and other aspects of nuclear energy. The numbers on the left corners of the entries are report numbers, and on the right corners the serial numbers. A report number index is annexed

  2. China nuclear science and technology report abstracts 1996

    International Nuclear Information System (INIS)

    1997-10-01

    The bibliographies and abstracts of China Nuclear Science and Technology Reports published in 1996 (Report Numbers CNIC-01021∼CNIC-01130) are presented. The items are arranged according to INIS subject categories, which mainly are physical sciences, chemistry, materials, earth sciences, life sciences, isotopes, isotope and radiation applications engineering and technology, and other aspects of nuclear energy. The numbers on the left corners of the entries are report numbers, and on the right corners the serial numbers. A report number index is annexed

  3. Abstracts

    OpenAIRE

    Revista, Innovar

    2011-01-01

    New approaches towards Efficiency, Productivity and Quality in Management Theory / New approaches towards Efficiency, Productivity and Quality in Management Theory / The new paradigm regarding Science and Management Theory / Game Theory as applied to Administration / A Systemic approach to Territorial Diagnosis /  A prolile 0f Technological Capacity in the Graphical Art, Printing and Publishing Industry / Colombian Industrialisation: a Heterodox Vision /Determinant factors in environmental po...

  4. ABSTRACT

    Directory of Open Access Journals (Sweden)

    Michelle de Stefano Sabino

    2011-12-01

    Full Text Available This paper aims to describe and to analyze the integration observed in the Sintonia project with respect to the comparison of project management processes to the model of the Stage-Gate ®. The literature addresses these issues conceptually, but lack an alignment between them that is evident in practice. As a method was used single case study. The report is as if the Sintonia project, developed by PRODESP - Data Processing Company of São Paulo. The results show the integration of project management processes with the Stage-Gate model developed during the project life cycle. The formalization of the project was defined in stages in which allowed the exploitation of economies of repetition and recombination to the development of new projects. This study contributes to the technical vision in dealing with the integration of project management processes. It was concluded that this system represents an attractive way, in terms of creating economic value and technological innovation for the organization.

  5. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-05-15

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  6. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-09-30

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  7. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-11-04

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  8. Laboratory technology research: Abstracts of FY 1998 projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of the country: the world-class basic research capability of the DOE Office of Science (SC) national laboratories and the unparalleled entrepreneurial spirit of American industry. Projects supported by the LTR program in FY 1998 explore the applications of basic research advances relevant to DOE`s mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials, intelligent processing and manufacturing research, and environmental and biomedical research. Abstracts for 85 projects are contained in this report.

  9. Separations Technology for Clean Water and Energy

    Energy Technology Data Exchange (ETDEWEB)

    Jarvinen, Gordon D [Los Alamos National Laboratory

    2012-06-22

    Providing clean water and energy for about nine billion people on the earth by midcentury is a daunting challenge. Major investments in efficiency of energy and water use and deployment of all economical energy sources will be needed. Separations technology has an important role to play in producing both clean energy and water. Some examples are carbon dioxide capture and sequestration from fossil energy power plants and advanced nuclear fuel cycle scemes. Membrane separations systems are under development to improve the economics of carbon capture that would be required at a huge scale. For nuclear fuel cycles, only the PUREX liquid-liquid extraction process has been deployed on a large scale to recover uranium and plutonium from used fuel. Most current R and D on separations technology for used nuclear fuel focuses on ehhancements to a PUREX-type plant to recover the minor actinides (neptunium, americiu, and curium) and more efficiently disposition the fission products. Are there more efficient routes to recycle the actinides on the horizon? Some new approaches and barriers to development will be briefly reviewed.

  10. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2004-05-12

    This Technical Progress Report describes progress made on the seventeen subprojects awarded in the first year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of project activity only. The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium--Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno--that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation (2) Solid-liquid separation (3) Chemical/Biological Extraction (4) Modeling and Control, and (5) Environmental Control.

  11. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-01-20

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/Biological Extraction; (4) Modeling and Control; and (5) Environmental Control.

  12. CENTER FOR ADVANCED SEPARATION TECHNOLOGY (CAST) PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Roe-Hoan; Hull, Christopher

    2014-09-30

    The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations.

  13. Development of proliferation resistant isotope separation technology

    International Nuclear Information System (INIS)

    Jeong, Doyoung; Ko, Kwanghoon; Kim, Taeksoo; Park, Hyunmin; Lim, Gwon; Cha, Yongho; Han, Jaemin; Baik, Sunghoon; Cha, Hyungki

    2012-02-01

    This project was accomplished with an aim of establishing the industrial facilities for isotope separation in Korea. The experiment for the measurement of neutrino mass that has been an issue in physics, needs very much of enriched calcium-48 isotope. However, calcium-48 isotope can be produced only by the electro-magnetic method and, thus, its price is very expensive. Therefore, we expect that ALSIS can replace the electro-magnetic method for calcium-48 isotope production. In this research stage, the research was advanced systematically with core technologies, such as atomic vapor production, the measurement of vapor characteristics and stable and powerful laser development. These researches will be the basis of the next research stages. In addition, the international research trends and cooperation results are reported in this report

  14. Silicon Microstructures and Technologies in Separation Science

    NARCIS (Netherlands)

    Fintschenko, Y.; van den Berg, Albert

    1998-01-01

    The development of miniaturized total analysis systems, is driven by the desire to automate sample handling, separation or sensing, and detection of analytical instrumentation. Interest in planar structures for separation techniques, especially capillary zone electrophoresis (CZE), has grown

  15. Water cooled reactor technology: Safety research abstracts no. 1

    International Nuclear Information System (INIS)

    1990-01-01

    The Commission of the European Communities, the International Atomic Energy Agency and the Nuclear Energy Agency of the OECD publish these Nuclear Safety Research Abstracts within the framework of their efforts to enhance the safety of nuclear power plants and to promote the exchange of research information. The abstracts are of nuclear safety related research projects for: pressurized light water cooled and moderated reactors (PWRs); boiling light water cooled and moderated reactors (BWRs); light water cooled and graphite moderated reactors (LWGRs); pressurized heavy water cooled and moderated reactors (PHWRs); gas cooled graphite moderated reactors (GCRs). Abstracts of nuclear safety research projects for fast breeder reactors are published independently by the Nuclear Energy Agency of the OECD and are not included in this joint publication. The intention of the collaborating international organizations is to publish such a document biannually. Work has been undertaken to develop a common computerized system with on-line access to the stored information

  16. Long-run Determinants of Technological Progress in Nigeria Abstract

    African Journals Online (AJOL)

    PROF. O. E. OSUAGWU

    and New Growth Theorists (NGT) endogenous technological change .... manna from heaven). This study adopted the conventional definition ... model is exogenous. ii. Existence of diminishing returns to capital iii. Non-rival nature of technological ideas iv. Constant returns to scale v. Perfect competition. These assumptions ...

  17. Long-run Determinants of Technological Progress in Nigeria Abstract

    African Journals Online (AJOL)

    PROF. O. E. OSUAGWU

    2013-12-01

    Dec 1, 2013 ... Economic historians have argued that long-term growth of an economy is to a great extent attributable to the growth of the Total Factor. Productivity (TFP) or technological progress rather than growth in factor accumulation. Following neoclassical assumption of exogenous technological change and New ...

  18. Contagious architecture: computation, aesthetics, and space (technologies of lived abstraction)

    CERN Document Server

    Parisi, Luciana

    2013-01-01

    In Contagious Architecture, Luciana Parisi offers a philosophical inquiry into the status of the algorithm in architectural and interaction design. Her thesis is that algorithmic computation is not simply an abstract mathematical tool but constitutes a mode of thought in its own right, in that its operation extends into forms of abstraction that lie beyond direct human cognition and control. These include modes of infinity, contingency, and indeterminacy, as well as incomputable quantities underlying the iterative process of algorithmic processing. The main philosophical source for the project is Alfred North Whitehead, whose process philosophy is specifically designed to provide a vocabulary for "modes of thought" exhibiting various degrees of autonomy from human agency even as they are mobilized by it. Because algorithmic processing lies at the heart of the design practices now reshaping our world -- from the physical spaces of our built environment to the networked spaces of digital culture -- the nature o...

  19. Sixth symposium on separation science and technology for energy applications

    International Nuclear Information System (INIS)

    Bell, J.T.; Watson, J.S.

    1990-01-01

    This meeting contained sessions on: membranes: liquid-phase and low-temperature gas-phase separations; separations in hazardous waste management; solvent extraction; membranes: high-temperature gas-phase separations; adsorption and chromatography; and novel separations in nuclear and isotope technologies

  20. Technology Clusters Exploration for Patent Portfolio through Patent Abstract Analysis

    Directory of Open Access Journals (Sweden)

    Gabjo Kim

    2016-12-01

    Full Text Available This study explores technology clusters through patent analysis. The aim of exploring technology clusters is to grasp competitors’ levels of sustainable research and development (R&D and establish a sustainable strategy for entering an industry. To achieve this, we first grouped the patent documents with similar technologies by applying affinity propagation (AP clustering, which is effective while grouping large amounts of data. Next, in order to define the technology clusters, we adopted the term frequency-inverse document frequency (TF-IDF weight, which lists the terms in order of importance. We collected the patent data of Korean electric car companies from the United States Patent and Trademark Office (USPTO to verify our proposed methodology. As a result, our proposed methodology presents more detailed information on the Korean electric car industry than previous studies.

  1. Artificial Intelligence and Educational Technology: A Natural Synergy. Extended Abstract.

    Science.gov (United States)

    McCalla, Gordon I.

    Educational technology and artificial intelligence (AI) are natural partners in the development of environments to support human learning. Designing systems with the characteristics of a rich learning environment is the long term goal of research in intelligent tutoring systems (ITS). Building these characteristics into a system is extremely…

  2. Laboratory technology research - abstracts of FY 1997 projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of this country: the world-class basic research capability of the DOE Energy Research (ER) multi-program national laboratories and the unparalleled entrepreneurial spirit of American industry. A distinguishing feature of the ER multi-program national laboratories is their ability to integrate broad areas of science and engineering in support of national research and development goals. The LTR program leverages this strength for the Nation`s benefit by fostering partnerships with US industry. The partners jointly bring technology research to a point where industry or the Department`s technology development programs can pursue final development and commercialization. Projects supported by the LTR program are conducted by the five ER multi-program laboratories. These projects explore the applications of basic research advances relevant to DOE`s mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials; intelligent processing/manufacturing research; and sustainable environments.

  3. Laboratory Technology Research: Abstracts of FY 1996 projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of this country: the world-class basic research capability of the DOE Energy Research (ER) multi-program national laboratories and the unparalleled entrepreneurial spirit of American industry. Projects supported by the LTR program are conducted by the five ER multi-program laboratories: Argonne, Brookhaven, Lawrence Berkeley, Oak Ridge, and Pacific Northwest National Laboratories. These projects explore the applications of basic research advances relevant to Department of Energy`s (DOE) mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials, intelligent processing/manufacturing research, and sustainable environments.

  4. Membrane-based technologies for biogas separations.

    Science.gov (United States)

    Basu, Subhankar; Khan, Asim L; Cano-Odena, Angels; Liu, Chunqing; Vankelecom, Ivo F J

    2010-02-01

    Over the past two decades, membrane processes have gained a lot of attention for the separation of gases. They have been found to be very suitable for wide scale applications owing to their reasonable cost, good selectivity and easily engineered modules. This critical review primarily focuses on the various aspects of membrane processes related to the separation of biogas, more in specific CO(2) and H(2)S removal from CH(4) and H(2) streams. Considering the limitations of inorganic materials for membranes, the present review will only focus on work done with polymeric materials. An overview on the performance of commercial membranes and lab-made membranes highlighting the problems associated with their applications will be given first. The development studies carried out to enhance the performance of membranes for gas separation will be discussed in the subsequent section. This review has been broadly divided into three sections (i) performance of commercial polymeric membranes (ii) performance of lab-made polymeric membranes and (iii) performance of mixed matrix membranes (MMMs) for gas separations. It will include structural modifications at polymer level, polymer blending, as well as synthesis of mixed matrix membranes, for which addition of silane-coupling agents and selection of suitable fillers will receive special attention. Apart from an overview of the different membrane materials, the study will also highlight the effects of different operating conditions that eventually decide the performance and longevity of membrane applications in gas separations. The discussion will be largely restricted to the studies carried out on polyimide (PI), cellulose acetate (CA), polysulfone (PSf) and polydimethyl siloxane (PDMS) membranes, as these membrane materials have been most widely used for commercial applications. Finally, the most important strategies that would ensure new commercial applications will be discussed (156 references).

  5. Thermodynamics for separation-process technology

    Energy Technology Data Exchange (ETDEWEB)

    Prausnitz, J.M.

    1995-10-01

    When contemplating or designing a separation process, every chemical engineer at once recognizes the thermodynamic boundary conditions that must be satisfied: when a mixture is continuously processed to yield at least partially purified products, energy and mass must be conserved and work must be done. In his daily tasks, a chemical engineer uses thermodynamic concepts as tacit, almost subconscious, knowledge. Thus, qualitative thermodynamics significantly informs process conception at its most fundamental level. However, quantitative design requires detailed knowledge of thermodynamic relations and physical chemistry. Most process engineers, concerned with flow sheets and economics, cannot easily command that detailed knowledge and therefore it is advantageous for them to maintain close contact with those specialists who do. Quantitative chemical thermodynamics provides an opportunity to evaluate possible separation processes not only because it may give support to the process engineer`s bold imagination but also because, when coupled with molecular models, it can significantly reduce the experimental effort required to determine an optimum choice of process alternatives. Six examples are presented to indicate the application of thermodynamics for conventional and possible future separation processes.

  6. Separation of Ionic Solutes. Abstracts of the 9th international conference SIS'01

    International Nuclear Information System (INIS)

    Kufcakova, J.

    2001-01-01

    About 76 peoples from Slovakia, Czech Republic, Egypt, Germany, IAEA, Italia, Japan, Lithuania, Poland, Romania, Russia, Switzerland, Syria, Ukraine, and United States of America took part in the conference. 68 reports had been presented. The conference made an essential contribution into elaboration of conception of modern different separation methods of ionic solutes with application to radioecology, separation of radionuclides, pollution matter, preparation and control of radiopharmaceuticals. Lectures has proceed in next sections: (A) Speciation; (B) Organic and bioseparations; (C) Ion exchange and sorption (D) Mobility, Waste; (E) Electro, Magnetic and Membrane; (F) Solvent extraction

  7. Technological civilization impact on the environment. Situation in the post-Soviet area. Abstracts

    International Nuclear Information System (INIS)

    Gabowitsch, E.; Granberg, I.; Hefter, E.

    1996-01-01

    The book of abstracts contains 123 abstracts on the following main topic: East-West cooperation in the field of assessment of the technological civilization impact on the environment and man, industrial, agricultural, traffic, military and urban pollution and contamination by nuclear power utilization. (HP)

  8. Separation of Ionic Solutes. Abstracts of the 10th international conference SIS'03

    International Nuclear Information System (INIS)

    Kuruc, J.; Kufcakova, J.; Macasek, F.

    2003-08-01

    About 83 peoples from Slovakia, Belarus, Belgium, Czech Republic, Egypt, Germany, IAEA, Italia, Iran, Israel, Japan, Poland, Romania, Russia, Switzerland, and United States of America took part in the conference. 82 reports had been presented. The conference made an essential contribution into elaboration of conception of modern different separation methods of ionic solutes with application to radioecology, separation of radionuclides, pollution matter, preparation and control of radiopharmaceuticals. Lectures has proceed in next sections: (A) Theory, General; (B) Sorption; (C) Solvent extraction; (D) Ion exchange electrochemical and liquid chromatography. Some full text of registered participants papers will be published during two years on the web page of the Foundation Curie in Adobe Acrobat (PDF) format

  9. Factors influencing adoption of manure separation technology in The Netherlands.

    Science.gov (United States)

    Gebrezgabher, Solomie A; Meuwissen, Miranda P M; Kruseman, Gideon; Lakner, Dora; Oude Lansink, Alfons G J M

    2015-03-01

    Manure separation technologies are essential for sustainable livestock operations in areas with high livestock density as these technologies result in better utilization of manure and reduced environmental impact. Technologies for manure separation have been well researched and are ready for use. Their use, however, has been limited to the Netherlands. This paper investigates the role of farm and farmer characteristics and farmers' attitudes toward technology-specific attributes in influencing the likelihood of the adoption of mechanical manure separation technology. The analysis used survey data collected from 111 Dutch dairy farmers in 2009. The results showed that the age and education level of the farmer and farm size are important variables explaining the likelihood of adoption. In addition to farm and farmer characteristics, farmers' attitudes toward the different attributes of manure separation technology significantly affect the likelihood of adoption. The study generates useful information for policy makers, technology developers and distributors in identifying the factors that impact decision-making behaviors of farmers. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. Twenty-ninth ORNL/DOE conference on analytical chemistry in energy technology. Abstracts of papers

    International Nuclear Information System (INIS)

    1986-01-01

    This booklet contains separate abstracts of 55 individual papers presented at this conference. Different sections in the book are titled as follows: laser techniques; resonance ionization spectroscopy; laser applications; new developments in mass spectrometry; analytical chemistry of hazardous waste; and automation and data management

  11. Symposium on intermediate-range atmospheric-transport processes and technology assessment. [Lead Abstract

    Energy Technology Data Exchange (ETDEWEB)

    1981-10-01

    Separate abstracts were prepared for the 47 papers in this proceedings. The purpose of this meeting was to assess the state of the art of modeling atmospheric transport processes 10 to 100 km downwind of point and area sources of pollution. (KRM)

  12. X-RAYS SEPARATOR: FORWARD STEP IN TECHNOLOGY OF OPTICAL SEPARATION

    OpenAIRE

    N. N. Potrakhov; S. L. Beletskiy; F. B. Musaev

    2017-01-01

    Presently the X-ray separation is used not only for research program, but it is also elaborated and applied for different sectors of economy. The seeds as biological objects that possess the complicated microstructure are very difficult to be exanimated by x-ray technology. The application of x-rays and further elaboration of optical  separators, principle  of action, basic specifications, way of their use and their efficiency was shown in the article. The x-ray separator may distinguish all ...

  13. Studies on Separation Process and Production Technology of Boron Isotope

    OpenAIRE

    LI Jian-ping

    2014-01-01

    The boron isotopes separation test was performed by chemical exchange reaction in the benzene ether -three boron fluoride system, which resulted to the boron isotopic enrichment of -10 in the liquid phase, the boron isotopic enrichment of -11 in the gas phase. After then, boron isotope separation trial production has been finished. In this process, the exchange column and complex tower normal operating parameters and the complex tower technology have been obtained, the problems of material di...

  14. Evaluation of Mars CO2 Capture and Gas Separation Technologies

    Science.gov (United States)

    Muscatello, Anthony C.; Santiago-Maldonado, Edgardo; Gibson, Tracy; Devor, Robert; Captain, James

    2011-01-01

    Recent national policy statements have established that the ultimate destination of NASA's human exploration program is Mars. In Situ Resource Utilization (ISRU) is a key technology required to ,enable such missions and it is appropriate to review progress in this area and continue to advance the systems required to produce rocket propellant, oxygen, and other consumables on Mars using the carbon dioxide atmosphere and other potential resources. The Mars Atmospheric Capture and Gas separation project is selecting, developing, and demonstrating techniques to capture and purify Martian atmospheric gases for their utilization for the production of hydrocarbons, oxygen, and water in ISRU systems. Trace gases will be required to be separated from Martian atmospheric gases to provide pure CO2 to processing elements. In addition, other Martian gases, such as nitrogen and argon, occur in concentrations high enough to be useful as buffer gas and should be captured as well. To achieve these goals, highly efficient gas separation processes will be required. These gas separation techniques are also required across various areas within the ISRU project to support various consumable production processes. The development of innovative gas separation techniques will evaluate the current state-of-the-art for the gas separation required, with the objective to demonstrate and develop light-weight, low-power methods for gas separation. Gas separation requirements include, but are not limited to the selective separation of: (1) methane and water from unreacted carbon oxides (C02-CO) and hydrogen typical of a Sabatier-type process, (2) carbon oxides and water from unreacted hydrogen from a Reverse Water-Gas Shift process, (3)/carbon oxides from oxygen from a trash/waste processing reaction, and (4) helium from hydrogen or oxygen from a propellant scavenging process. Potential technologies for the separations include' freezers, selective membranes, selective solvents, polymeric sorbents

  15. More Colleges Charge Students a Separate Fee for Technology.

    Science.gov (United States)

    Young, Jeffrey R.

    1997-01-01

    Increasingly, colleges and universities are charging students a separate fee for campus computing facilities and using the income for improvements. Critics feel the costs should be included in tuition, but supporters feel the fees highlight the costs of advancing technology and may reduce misuse. Most fees are pegged to semester or credit hours.…

  16. RECENT PROGRESS OF OXYGEN/NITROGEN SEPARATION USING MEMBRANE TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    K. C. CHONG

    2016-07-01

    Full Text Available The oxygen-enriched air is highly demanded for various industrial applications such as medical, chemical and enhanced combustion processes. The conventional oxygen/nitrogen production is either cryogenic distillation or pressure swing adsorption (PSA. Both of these techniques possess the production capability of 20 to 300 tonnes of oxygen per day and oxygen purity of more than 95%. However, these techniques are energy intensive. Alternatively, membrane technology is an emerging technology in gas separation as it requires low energy consumption and relatively moderate production volume, if compared to the conventional gas production techniques. These advantages have spurred much interest from industries and academics to speed up the commercial viability of the O2/N2 separation via membrane technology. In this review, the conventional and membrane technologies in O2/N2 separation, as well as recent development of membrane fabrication techniques and materials are reviewed. The latest membrane performance in O2/N2 separation is also tabulated and discussed.

  17. X-RAYS SEPARATOR: FORWARD STEP IN TECHNOLOGY OF OPTICAL SEPARATION

    Directory of Open Access Journals (Sweden)

    N. N. Potrakhov

    2017-01-01

    Full Text Available Presently the X-ray separation is used not only for research program, but it is also elaborated and applied for different sectors of economy. The seeds as biological objects that possess the complicated microstructure are very difficult to be exanimated by x-ray technology. The application of x-rays and further elaboration of optical  separators, principle  of action, basic specifications, way of their use and their efficiency was shown in the article. The x-ray separator may distinguish all hidden seed defects as it was described by a programmer, where owing to the use of the optical separating block in visual range it is possible to add some more details as a shape, brightness and a color of object surface being exanimated. The elaboration of such separation equipment is scientifically hard work requiring time and expenses. Last year researchers of ‘LETI’ developed the working model of industrial x-ray separator for examination of grains and nuts in different crops. This model was made on the basis of photoseparator F-5 manufactured at OAO ‘Voronezhselmash’. The instrument state and its mechanism operation are highlighted on monitor. In the regime of processing (separation and examination of each controlled batch, the passport is produced with  following  information on identification  code,  time of material receiving, time of test passed, number of grains or seeds tested. The code of receiver of material is given to each of established characteristics when working the regime of separation, determination of number of objects with characteristics tested and number of unidentified objects. The application of x-ray separators constructed on the basis of photoseparator F-5 enables to carry out the complex estimation on seed quality and separation in only instrument with the development of electronic protocol with many characteristics.

  18. Separations technology development to support accelerator-driven transmutation concepts

    International Nuclear Information System (INIS)

    Venneri, F.; Arthur, E.; Bowman, C.

    1996-01-01

    This is the final report of a one-year Laboratory-Directed Research and Development (LDRD) Project at the Los Alamos National Laboratory (LANL). This project investigated separations technology development needed for accelerator-driven transmutation technology (ADTT) concepts, particularly those associated with plutonium disposition (accelerator-based conversion, ABC) and high-level radioactive waste transmutation (accelerator transmutation of waste, ATW). Specific focus areas included separations needed for preparation of feeds to ABC and ATW systems, for example from spent reactor fuel sources, those required within an ABC/ATW system for material recycle and recovery of key long-lived radionuclides for further transmutation, and those required for reuse and cleanup of molten fluoride salts. The project also featured beginning experimental development in areas associated with a small molten-salt test loop and exploratory centrifugal separations systems

  19. New technologies for power, industry and civil engineering. Issue 5. Collected volume of abstracts and papers

    International Nuclear Information System (INIS)

    2002-01-01

    Abstracts and papers of participants of young collaborators competition taking place in Dimitrovgrad are presented in the collected volume. Presented data encompass the study of wild aspects connected with reactor materials and technology of fuel elements, physical and technical problems of nuclear reactors and reactor safety, fuel cycle. Questions of isotope production and ionizing radiation sources, automation, measuring instruments, analysis and metrology are discussed. Part of data is devoted to technical problems of ecologically pure technologies and efforts applied in different branches [ru

  20. Food Science and Technology Abstracts (FSTA): guia ràpida. Octubre 2014

    OpenAIRE

    Universitat de Barcelona. CRAI

    2014-01-01

    Guia ràpida de la base de dades bibliogràfica Food Science and Technology Abstracts (FSTA) és una base de dades bibliogràfica d'àmbit mundial sobre ciència, tecnologia i química alimentària, nutrició i salut humana, biotecnologia i toxicologia.

  1. Food Science and Technology Abstracts: guia ràpida [text]. Curs 2017-18

    OpenAIRE

    Universitat de Barcelona. CRAI

    2017-01-01

    Guia ràpida de la base de dades Food Science and Technology Abstracts (FSTA) que és una base de dades bibliogràfica d'àmbit mundial sobre ciència, tecnologia i química alimentària, nutrició i salut humana, biotecnologia i toxicologia.

  2. Food Science and Technology Abstracts: guia ràpida [text]. Curs 2015-16

    OpenAIRE

    Universitat de Barcelona. CRAI

    2016-01-01

    Guia ràpida de la base de dades Food Science and Technology Abstracts (FSTA) que és una base de dades bibliogràfica d'àmbit mundial sobre ciència, tecnologia i química alimentària, nutrició i salut humana, biotecnologia i toxicologia.

  3. Efficient Separations and Processing Crosscutting Program. Technology summary

    International Nuclear Information System (INIS)

    1995-06-01

    The Efficient Separations and Processing (ESP) Crosscutting Program was created in 1991 to identify, develop, and perfect separations technologies and processes to treat wastes and address environmental problems throughout the DOE Complex. The ESP funds several multi-year tasks that address high-priority waste remediation problems involving high-level, low-level, transuranic, hazardous, and mixed (radioactive and hazardous) wastes. The ESP supports applied research and development (R and D) leading to demonstration or use of these separations technologies by other organizations within DOE-EM. Treating essentially all DOE defense wastes requires separation methods that concentrate the contaminants and/or purify waste streams for release to the environment or for downgrading to a waste form less difficult and expensive to dispose of. Initially, ESP R and D efforts focused on treatment of high-level waste (HLW) from underground storage tanks (USTs) because of the potential for large reductions in disposal costs and hazards. As further separations needs emerge and as waste management and environmental restoration priorities change, the program has evolved to encompass the breadth of waste management and environmental remediation problems

  4. Proceedings of the third international conference on recent advances in material processing technology: book of abstracts

    International Nuclear Information System (INIS)

    Mannan, S.L.; Manisekar, K.; Lenin, N.; Ramanan, P.

    2013-01-01

    The objective of the conference was to disseminate information on the latest trends and global research in manufacturing and material processing techniques. This conference provided a forum to share information on technologies, concepts, and techniques to improve the quality of the products and productivity. The deliberations at the conference provided discussion on Casting Technology, Forming processes, Manufacturing Techniques, Simulation and Modeling Techniques, Tools and Precision Engineering, Condition Monitoring, Composites, Optimization Techniques, Surface Engineering, Welding Technology, Nano Technology, Recycle Technology, Fuel Cell Technology, Sensors and Robotics, Materials for Energy Engineering, Rapid Protyping, Eco-Manufacturing Systems, Functionally Graded Materials, Non-Destructive Evaluation, Materials Development and Evaluation etc. Articles relevant to INIS are indexed separately

  5. Development of O-18 stable isotope separation technology using membrane

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Woo; Kim, Taek Soo; Choi, Hwa Rim; Park, Sung Hee; Lee, Ki Tae; Chang, Dae Shik

    2006-06-15

    The ultimate goal of this investigation is to develop the separation technology for O-18 oxygen stable isotope used in a cyclotron as a target for production of radioisotope F-18. F-18 is a base material for synthesis of [F-18]FDG radio-pharmaceutical, which is one of the most important tumor diagnostic agent used in PET (Positron Emission Tomography). More specifically, this investigation is focused on three categories as follow, 1) development of the membrane distillation isotope separation process to re-enrich O-18 stable isotope whose isotopic concentration is reduced after used in a cyclotron, 2) development of organic impurity purification technology to remove acetone, methanol, ethanol, and acetonitrile contained in a used cyclotron O-18 enriched target water, and 3) development of a laser absorption spectroscopic system for analyzing oxygen isotopic concentration in water.

  6. Establishment of the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-09-30

    This Final Technical Report covers the eight sub-projects awarded in the first year and the five projects awarded in the second year of Cooperative Agreement DE-FC26-01NT41091: Establishment of the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  7. ESTABLISHMENT OF THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2003-07-01

    Technical Progress Report describes progress made on the eight sub-projects awarded in the first year of Cooperative Agreement DE-FC26-01NT41091: Establishment of the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of activity only.

  8. Chemical technology of the systems, partitioning and separation, disposal

    International Nuclear Information System (INIS)

    Volk, V.I.

    1997-01-01

    A reactor-accelerator reprocessing complex is described. The complex comprises an electronuclear transmutation installation and chemical and technological support units for maintenance of the steady-state of the blanket, separation of short-lived transmutation products to be disposed of from other components of the blanket, chemical conversion to relevant stable species of products to be disposed of for interim storage and disposal

  9. Actual problems of physics and technology. III International youth scientific school-conference. Book of abstracts

    International Nuclear Information System (INIS)

    2014-01-01

    The third International youth scientific school-conference took place 10-13 April 2014 year in Moscow on the basis National Research Nuclear University MEPhI and RAS Lebedev P.N. Physical Institute. The actual scientific problems of current fundamental and applied physics as well as nuclear and physical technologies were discussed. This book of abstracts contains many interesting items devoted problems of theoretical physics and astrophysics, nuclear physics, nanotecnology, laser physics and plasma physics [ru

  10. Embodied cognition, abstract concepts, and the benefits of new technology for implicit body manipulation

    Science.gov (United States)

    Dijkstra, Katinka; Eerland, Anita; Zijlmans, Josjan; Post, Lysanne S.

    2014-01-01

    Current approaches on cognition hold that concrete concepts are grounded in concrete experiences. There is no consensus, however, as to whether this is equally true for abstract concepts. In this review we discuss how the body might be involved in understanding abstract concepts through metaphor activation. Substantial research has been conducted on the activation of common orientational metaphors with bodily manipulations, such as “power is up” and “more is up” representations. We will focus on the political metaphor that has a more complex association between the concept and the concrete domain. However, the outcomes of studies on this political metaphor have not always been consistent, possibly because the experimental manipulation was not implicit enough. The inclusion of new technological devices in this area of research, such as the Wii Balance Board, seems promising in order to assess the groundedness of abstract conceptual spatial metaphors in an implicit manner. This may aid further research to effectively demonstrate the interrelatedness between the body and more abstract representations. PMID:25191282

  11. The development of zirconia membrane oxygen separation technology

    International Nuclear Information System (INIS)

    Chiacchi, F.T.; Badwal, S.P.S.; Velizko, V.

    2000-01-01

    The oxygen separation technology based on ceramic membranes constructed from stabilised zirconia is currently under development for applications ranging from oxygen generation or air enrichment for medical use to control of oxygen concentration or oxygen removal from gas streams and enclosures for semiconductor, food packaging and process control instrumentation industries. The technology is based on a rugged tubular design with extensive thermal cycling capability. Several single and three tube devices have been operated for periods up to 5000h. An eight tube module, as a building block for larger scale oxygen production or removal devices, has been constructed and is being evaluated. In this paper, the construction of the device, oxygen generating capacity, life time tests and performance of the ceramic membrane device under development at CSIRO will be discussed. Copyright (2000) The Australian Ceramic Society

  12. New Fragment Separation Technology for Superheavy Element Research

    International Nuclear Information System (INIS)

    Shaughnessy, D A; Moody, K J; Henderson, R A; Kenneally, J M; Landrum, J H; Lougheed, R W; Patin, J B; Stoyer, M A; Stoyer, N J; Wild, J F; Wilk, P A

    2008-01-01

    This project consisted of three major research areas: (1) development of a solid Pu ceramic target for the MASHA separator, (2) chemical separation of nuclear decay products, and (3) production of new isotopes and elements through nuclear reactions. There have been 16 publications as a result of this project, and this collection of papers summarizes our accomplishments in each of the three areas of research listed above. The MASHA (Mass Analyzer for Super-Heavy Atoms) separator is being constructed at the U400 Cyclotron at the Flerov Laboratory of Nuclear Reactions in Dubna, Russia. The purpose of the separator is to physically separate the products from nuclear reactions based on their isotopic masses rather than their decay characteristics. The separator was designed to have a separation between isotopic masses of ±0.25 amu, which would enable the mass of element 114 isotopes to be measured with outstanding resolution, thereby confirming their discovery. In order to increase the production rate of element 114 nuclides produced via the 244 Pu+ 48 Ca reaction, a new target technology was required. Instead of a traditional thin actinide target, the MASHA separator required a thick, ceramic-based Pu target that was thick enough to increase element 114 production while still being porous enough to allow reaction products to migrate out of the target and travel through the separator to the detector array located at the back end. In collaboration with UNLV, we began work on development of the Pu target for MASHA. Using waste-form synthesis technology, we began by creating zirconia-based matrices that would form a ceramic with plutonium oxide. We used samarium oxide as a surrogate for Pu and created ceramics that had varying amounts of the starting materials in order to establish trends in material density and porosity. The results from this work are described in more detail in Refs. [1,4,10]. Unfortunately, work on MASHA was delayed in Russia because it was found that

  13. 9th International Frumkin symposium: Electrochemical technologies and materials for 21st century. Abstracts

    International Nuclear Information System (INIS)

    2010-01-01

    Abstracts of the 9th International Frumkin symposium: Electrochemical technologies and materials for 21st century are presented. The symposium was held 24-29 October 2010 in Moscow. The symposium included the following microsymposiums: Electrical double layer and electrochemical kinetics (from phenomenological to molecular level); New processes, materials and devices for successful electrochemical transformation of energy; Corrosion and protection of materials; General and local corrosion; Electroactive composition materials; Bioelectrochemistry. The Frumkin symposium includes plenary lectures, oral and poster presentations. Official language of the symposium is English [ru

  14. Alternative applications of atomic vapor laser isotope separation technology

    International Nuclear Information System (INIS)

    1991-01-01

    This report was commissioned by the Secretary of Energy. It summarizes the main features of atomic vapor laser isotope separation (AVLIS) technology and subsystems; evaluates applications, beyond those of uranium enrichment, suggested by Lawrence Livermore National Laboratory (LLNL) and a wide range of US industries and individuals; recommends further work on several applications; recommends the provision of facilities for evaluating potential new applications; and recommends the full involvement of end users from the very beginning in the development of any application. Specifically excluded from this report is an evaluation of the main AVLIS missions, uranium enrichment and purification of plutonium for weapons. In evaluating many of the alternative applications, it became clear that industry should play a greater and earlier role in the definition and development of technologies with the Department of Energy (DOE) if the nation is to derive significant commercial benefit. Applications of AVLIS to the separation of alternate (nonuranium) isotopes were considered. The use of 157 Gd as burnable poison in the nuclear fuel cycle, the use 12 C for isotopically pure diamond, and the use of plutonium isotopes for several nonweapons applications are examples of commercially useful products that might be produced at a cost less than the product value. Separations of other isotopes such as the elemental constituents of semiconductors were suggested; it is recommended that proposed applications be tested by using existing supplies to establish their value before more efficient enrichment processes are developed. Some applications are clear, but their production costs are too high, the window of opportunity in the market has passed, or societal constraints (e.g., on reprocessing of reactor fuel) discourage implementation

  15. Separation of HTO from water using membrane technology

    International Nuclear Information System (INIS)

    Nelson, D.A.; Duncan, J.B.; Jensen, G.A.; Burton, S.D.

    1994-01-01

    This research effort is being conducted to evaluate the use of membrane technology for the separation of tritium (via HTO) from sources containing HTO as a contaminant. Experience with membrane systems in industry indicates that they are inherently energy efficient. Due to the large volumes of contaminated water at U.S. Department of Energy sites, such energy efficiency would be welcome. Aromatic polyphosphazenes were chosen as the polymeric material for the membranes being investigated because they have been shown to possess excellent radiological, thermal and chemical stability. We prepared poly(diphenoxy)phosphazene (PN x ) and several carboxylated derivatives. Each polymer was solvent cast from dioxane onto polyethylene terephthalate support material. These composite membranes were tested with water containing 10 pCi/mL HTO under dead-end filtration conditions. The PN x provided separation (depletion) of HTO up to 36% throughout the temperature range of 2 deg - 25 deg C. The 10% carboxylated PN x -membrane has shown HTO separation (depletion) up to 74% at 2 deg - 4 deg C. However, little HTO depletion has been observed with this membrane at 25 deg C or 35 deg C. The membrane containing 5% carboxyl-groups appeared to present a similar depletion and temperature response. Higher carboxyl content (20% and 30%) was less efficient. The results of this study indicate that very low concentrations of HTO can be separated from water using polyphosphazene membranes. Continuing work will be performed with cross-flow membrane cells (to mimic reverse-osmosis conditions) and with higher concentrations of HTO. (author) 30 refs., 3 tabs

  16. 5. IEA International workshop on beryllium technology for fusion. Book of abstracts

    International Nuclear Information System (INIS)

    2001-01-01

    The collection includes the abstracts of reports presented to the 5-th IEA international workshop on beryllium technology for fusion. The themes of reports are as follows: status of beryllium technology for fusion in Russia; manufacturing and testing of Be armoured first wall mock-up for ITER; development of the process of diffusion welding of metals stainless steel-copper-beryllium into a single composite; some features of beryllium-laser beam interaction; the effect of irradiation dose on tritium and helium release from neutron irradiated beryllium; thermal properties of neutron irradiated Be 12 Ti. The results of investigating the mechanical properties variation and swelling of beryllium under high temperature neutron irradiation are presented [ru

  17. International Conference on Development and Applications of Nuclear Technologies (NUTECH-2011). Book of Abstracts

    International Nuclear Information System (INIS)

    Dudala, J.; Stegowski, Z.

    2011-01-01

    The main object of the International Conference on Development and Applications of Nuclear Technologies - NUTECH (Cracow, 11-14 September 2011) is to bring together scientists working on the development and application of nuclear technologies and to discuss further research fulfilling the needs of modern society. In the conference participate over 160 researchers from about 20 countries - among them from USA, France, Germany, Italy, Republic of South Africa, Japan, China, Brazil and South Korea . Book of Abstracts covers over 170 presentations - 13 plenary lectures, 42 section lectures and 118 posters. Thy provide information about possibilities and results of the applications of nuclear technologies in the modern economy of the 21 th century and cover the following topics: (a) nuclear energy in Poland; (b) applications of nuclear techniques; (c) nuclear energy and management of radioactive wastes; (d) radiation chemistry; (e) dosimetry and radiation protection; (f) environmental studies; (g) radiotherapy; (h) radiometric measurements; (i) radiopharmaceuticals and radioisotope production; (j) characterization of materials; (k) biomedical studies; (l) nuclear techniques in preserving cultural heritage; (m) applications of nuclear technologies in agriculture and food processing; (n) technological developments. The conference refers to 100-anniversary of the Nobel Prize in Chemistry for Maria Sklodowska-Curie. The conference is organized by Faculty of Physics and Applied Computer Science, AGH University of Science and Technology and Institute of Nuclear Chemistry and Technology. It is financially supported by Polish Energy Group Nuclear Energy S.A. (PGE, Energia Jadrowa), Polish Nuclear Society (PTN), International Atomic Energy Agency, National Atomic Agency (PAA), European Nuclear Society and Municipality of Cracow.

  18. Abstracts and electronic proceedings of the Canadian Dam Association's 2008 annual conference : emerging technologies for dams

    International Nuclear Information System (INIS)

    2008-01-01

    This conference provided a national forum to explore and discuss emerging technologies which can be used to enhance dam safety and construction practices on both new and existing projects. Advancements in the fields of dam design, construction, and remedial works were reviewed as well as new techniques for dam monitoring programs. Engineers, geoscientists, dam owners and operators and other stakeholders exchanged ideas and information regarding the operation, maintenance and management of water and tailings dams. The conference sessions dealt with a variety of topics, including dam foundations; mining dams; dams and the environment; embankment dams; dams and seismicity; hydrotechnics; assessment and investigative technologies; dam instrumentation and monitoring; computational hydraulics; and dam safety. The conference featured 46 presentations, of which 37 have been catalogued separately for inclusion in this database. refs., tabs., figs

  19. Separation of the metallic and non-metallic fraction from printed circuit boards employing green technology

    Energy Technology Data Exchange (ETDEWEB)

    Estrada-Ruiz, R.H., E-mail: rhestrada@itsaltillo.edu.mx; Flores-Campos, R., E-mail: rcampos@itsaltillo.edu.mx; Gámez-Altamirano, H.A., E-mail: hgamez@itsaltillo.edu.mx; Velarde-Sánchez, E.J., E-mail: ejvelarde@itsaltillo.edu.mx

    2016-07-05

    Highlights: • Small sizes of particles are required in order to separate the different fractions. • Inverse flotation process is an efficient green technology to separate fractions. • Superficial air velocity is the main variable in the inverse flotation process. • Inverse flotation is a green process because the pulṕs pH is 7.0 during the test. - Abstract: The generation of electrical and electronic waste is increasing day by day; recycling is attractive because of the metallic fraction containing these. Nevertheless, conventional techniques are highly polluting. The comminution of the printed circuit boards followed by an inverse flotation process is a clean technique that allows one to separate the metallic fraction from the non-metallic fraction. It was found that particle size and superficial air velocity are the main variables in the separation of the different fractions. In this way an efficient separation is achieved by avoiding the environmental contamination coupled with the possible utilization of the different fractions obtained.

  20. Efficient heavy crude oil dehydration with centrifugal separation technology

    Energy Technology Data Exchange (ETDEWEB)

    Perschke, T. [GEA Westfalia Separator Systems GmbH, Oelde (Germany)

    2009-07-01

    Most conventional oil reservoirs are declining and the importance of unconventional heavy crude oil reservoirs is increasing. Unconventional heavy crude oils cannot be handled in the traditional way for dewatering and desalting. The industry mostly employs static dewatering and desalting systems using electrostatic field, chemicals and temperature. These systems have their limitations when it comes to lower API grades. High-speed centrifuges from GEA Westfalia Separator are utilized successfully in the exploration, delivery and treatment of crude oils and oily water applications as they combine efficiency, reliability and environmental conservation in a broad spectrum of highly specialized applications. This paper presented the basic function and fundamental principle behind the separation of particles, or water droplets, in a liquid using Stokes Law. The paper also presented the throughput equation and discussed heavy oil extraction. The solution was then presented. The paper also explained why disk stack centrifuges are used for heavy crude oil dehydration. The process parameters for disc stack centrifuge technology were also reviewed along with future considerations for using disc stack centrifuges for crude oil. It was concluded that the efficiencies of the respective types of equipment are preliminarily determined by the driving g-force in combination with the length of the settling path for the oil droplets. 1 fig.

  1. Advanced Technology Section semiannual progress report, April 1-September 30, 1977. Volume 1. Biotechnology and environmental programs. [Lead Abstract

    Energy Technology Data Exchange (ETDEWEB)

    Pitt, W.W. Jr.; Mrochek, J.E. (comps.)

    1980-06-01

    Research efforts in six areas are reported. They include: centrifugal analyzer development; advanced analytical systems; environmental research; bioengineering research;bioprocess development and demonstration; and, environmental control technology. Individual abstracts were prepared for each section for ERA/EDB. (JCB)

  2. 75 FR 37860 - Aris Industries, Inc., Bene Io, Inc., Commodore Separation Technologies, Inc., Food Integrated...

    Science.gov (United States)

    2010-06-30

    ...., Commodore Separation Technologies, Inc., Food Integrated Technologies, Inc., Gap Instrument Corp., Skysat... information concerning the securities of Food Integrated Technologies, Inc. because it has not filed any... Separation Technologies, Inc. because it has not filed any periodic reports since the period ended June 30...

  3. Program and abstracts of the offshore oil and gas environmental effects monitoring workshop : approaches and technologies

    International Nuclear Information System (INIS)

    2003-01-01

    The offshore petroleum industry in eastern Canada has expanded rapidly, with exploration and production activities taking place over a wide range of oceanographic conditions. This workshop, hosted by Canada's largest marine research institute, was held to advance the understanding of environmental impacts from offshore oil and gas activity. In particular, it examined how information derived from environmental effects monitoring (EEM) programs contribute to improved drilling and production operations, mitigation measures, and the revision of regulations for waste treatment. The workshop examined if EEM programs are providing valuable information, and how they can be improved. The themes of the 3 sessions which focused on ways to carry out EEM were: (1) EEM and environmental management, (2) EEM methodologies and lessons learned, and (3) EEM methodologies and technologies. Participants form around the world identified priority research needs and coordinated collaborative research efforts. Approximately 70 papers and posters were presented at the workshop, of which 19 have been indexed separately for inclusion in this database (Author)

  4. Research and development separation technology: The DOE Industrial Energy Conservation Program

    Energy Technology Data Exchange (ETDEWEB)

    1987-07-01

    This brochure summarizes the Office of Industrial Programs' RandD efforts in the advancement of separation technology. The purpose of this brochure is to provide interested parties with information on federal industrial energy conservation activities in separation technology. The brochure is comprised of the following sections: Separation Technology, summarizes the current state of separation technology and its uses. Potential Energy Savings, discusses the potential for industrial energy conservation through the implementation of advanced separation processes. Office of Industrial Programs' RandD Efforts in Separation Technology Development, describes the separation RandD projects conducted by IP. RandD Data Base, lists contractor, principal investigator, and location of each separation-related RandD effort sponsored by IP.

  5. NATO Advanced Research Workshop: Application of Natural Microporous Materials to the Environmental Technology. Book of Abstracts

    International Nuclear Information System (INIS)

    1998-01-01

    In this proceedings About 80 people from Albania, Belgium, Bulgaria, Czech Republic, Estonia, Germany, Greece, Italy, Poland, Portugal, Romania, Russia, Spain, U.K., Turkey, Ukraine, U.S.A. and Slovakia took part in the workshop. 56 reports had been presented. from which 19 reports deals with the scope of INIS. The purpose of the workshop was the critical assessment of the current developments in the field of utilization of natural microporous materials (zeolites, clays, oxides) for the solution of problems related to the toxic and nuclear waste management, the water pollution control and decontamination, the environmental catalysis associated to the atmospheric pollution, the creation of new materials for energy storage and agricultural management including the development of artificial soils for plant growth in the space. Of especial importance for this meeting was the exchange of information and know-how among specialists working in institutions of NATO and Cooperation Partner countries aiming in the development of common strategies for the solution of environmental problems and the promotion of the further scientific and technological collaboration. Nineteen papers deals with the using of microporous materials for separation of radionuclides

  6. Carbon Dioxide Separation Technology: R&D Needs for the Chemical and Petrochemical Industries

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2007-11-01

    This report, the second in a series, is designed to summarize and present recommendations for improved CO2 separation technology for industrial processes. This report provides an overview of 1) the principal CO2 producing processes, 2) the current commercial separation technologies and 3) emerging adsorption and membrane technologies for CO2 separation, and makes recommendations for future research.

  7. Embodied cognition, abstract concepts, and the benefits of new technology for implicit body manipulation

    NARCIS (Netherlands)

    K. Dijkstra (Katinka); A. Eerland (Anita); J. Zijlmans (Josjan); L.S. Post (Lysanne)

    2014-01-01

    textabstractCurrent approaches on cognition hold that concrete concepts are grounded in concrete experiences. There is no consensus, however, as to whether this is equally true for abstract concepts. In this review we discuss how the body might be involved in understanding abstract concepts through

  8. Embodied cognition, abstract concepts, and the benefits of new technology for implicit body manipulation

    NARCIS (Netherlands)

    Dijkstra, K.; Eerland, A.; Zijlmans, J.; Post, L.S.

    2014-01-01

    Current approaches on cognition hold that concrete concepts are grounded in concrete experiences. There is no consensus, however, as to whether this is equally true for abstract concepts. In this review we discuss how the body might be involved in understanding abstract concepts through metaphor

  9. Determination of rare earth elements in geological samples by Icp-OES followed by ion exchange separation (abstract)

    International Nuclear Information System (INIS)

    Ahmad, S.

    2011-01-01

    Present study was carried out to develop a procedure for the chemical separation of rare earth elements (Rees) from major matrix elements using the cation exchange resin column and their quantitative determination by Icp-Oes. The standard reference samples with different concentrations of rare earth elements were prepared using analytical grade standards of rare earth elements (La, Ce, Pr, Nd, Eu, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Sc, Y) and major matrix elements (Al, B, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Si) in 1n HCl media. Sample solutions were passed through pre equilibrated strongly acidic cation-exchange resin (Dowex 50w X 8). Major matrix elements were eluted with 2n HCl And HNO/sub 3/ whereas Rees (La, Co, Pr, Nd, Eu, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Sc, Y) were eluted from the resin using 6 To 8n HNO/sub 3/. The proposed method separates the Rees quantitatively from most matrix constituents and greatly facilitates their rapid sequential analysis by ICP-OES. The results revealed usefulness of method for the 95-100% recovery of Rees and their determination up to 0.1 mu g/Ml in solutions of rare earth ores and other geological materials. (author)

  10. Technologies and microstructures for separation techniques in chemical analysis

    NARCIS (Netherlands)

    Spiering, Vincent L.; Spiering, V.L.; Lammerink, Theodorus S.J.; Jansen, Henricus V.; van den Berg, Albert; Fluitman, J.H.J.

    1996-01-01

    The possibilities for microtechnology in chemical analysis and separation techniques are discussed. The combination of the materials and the dimensions of structures can limit the sample and waste volumes on the one hand, but also increases the performance of the chemical systems. Especially in high

  11. Abstracts of the 15. Brazilian congress on food science and technology

    International Nuclear Information System (INIS)

    1996-01-01

    This meeting was about food science, technology and energy production. In this meeting were discussed subjects concerned food preservation and irradiation sources in economical, technological, social and research aspects

  12. Trends in coarse and fine grinding and separation technology ...

    African Journals Online (AJOL)

    Journal of Food Technology in Africa. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 4, No 2 (1999) >. Log in or Register to get access to full text downloads.

  13. Trends in coarse and fine grinding and separation technology ...

    African Journals Online (AJOL)

    Journal of Food Technology in Africa. Journal Home · ABOUT · Advanced Search · Current Issue · Archives · Journal Home > Vol 4, No 2 (1999) >. Log in or Register to get access to full text downloads.

  14. 7. Annual seminar of the scientific initiation of the Center for Development of Nuclear Technology. Abstracts

    International Nuclear Information System (INIS)

    2012-01-01

    This seminar presents the Scientific Initiation Program developed at the CDTN - Brazilian Center for the Development of Nuclear Technology and focuses on activities of the sectors of: radiopharmaceutical production; radiation applied to health; waste management; structural integrity; environment; nanotechnology and nuclear materials; reactor technology; mineral technology; reactor and analytical techniques

  15. Proceedings of the thirtieth national symposium on plasma science and technology: book of abstracts

    International Nuclear Information System (INIS)

    2015-01-01

    The topics covered in this symposium are: basic plasma, nuclear fusion, industrial plasma/plasma processing, space plasma and astrophysical plasma, laser plasma, exotic plasma, plasma diagnostics, computer modeling and other areas. Papers relevant to INIS are indexed separately

  16. Extended Abstracts from BioGeo99: Applications of Geospatial Technology to Biological Sciences

    National Research Council Canada - National Science Library

    Handley, Lawrence

    2000-01-01

    ... of Global Positioning System (GPS), aquatic and terrestrial telemetry, national classification systems, remote sensing, metadata, and other geospatial technologies used in biological science applications...

  17. Environmental Consequences of Future Biogas Technologies based on Separated Slurry

    DEFF Research Database (Denmark)

    Hamelin, Lorie; Wesnæs, Marianne; Wenzel, Henrik

    2011-01-01

    This consequential life cycle assessment study highlights the key environmental aspects of producing biogas from separated pig and cow slurry, a relatively new but probable scenario for future biogas production, as it avoids the reliance on constrained carbon cosubstrates. Three scenarios involving...... the whole slurry life cycle, including the flows bypassing the biogas plant. This study includes soil carbon balances and a method for quantifying the changes in yield resulting from increased nitrogen availability as well as for quantifying mineral fertilizers displacement. Soil carbon balances showed...

  18. USSR and Eastern Europe Scientific Abstracts, Cybernetics, Computers, and Automation Technology, Number 30.

    Science.gov (United States)

    1978-01-23

    Systems, College of Transportation, Zilina [Abstract] The article discusses programming of the INTEL 8080 microprocessor developed at the College of...Transportation at Zilina . A typical application program of a microcomputer contains 50 to 4,000 instructions. The means of programming depends on the

  19. 2. JAPAN-IAEA workshop on advanced safeguards technology for the future nuclear fuel cycle. Abstracts

    International Nuclear Information System (INIS)

    2009-01-01

    This international workshop addressed issues and technologies associated with safeguarding the future nuclear fuel cycle. The workshop discussed issues of interest to the safeguards community, facility operators and State Systems of accounting and control of nuclear materials. Topic areas covered were as follows: Current Status and Future Prospects of Developing Safeguards Technologies for Nuclear Fuel Cycle Facilities, Technology and Instrumentation Needs, Advanced Safeguards Technologies, Guidelines on Developing Instrumentation to Lead the Way for Implementing Future Safeguards, and Experiences and Lessons learned. This workshop was of interest to individuals and organizations concerned with future nuclear fuel cycle technical developments and safeguards technologies. This includes representatives from the nuclear industry, R and D organizations, safeguards inspectorates, State systems of accountancy and control, and Member States Support Programmes

  20. IRAP 2006, Book of Abstracts

    International Nuclear Information System (INIS)

    2006-01-01

    This publications related with Hacettepe University, Turkish Atomic Energy Authority, The Scientific and Technological Research Council of Turkey, International Atomic Energy Agency, CEA-Saclay, CEA-Saclay Drecam, ANKAmall Shopping Center and Ion Beam Applications Industrial that was held in Antalya, Turkey, 23-28 September 2006. A separate abstract was prepared for each paper

  1. USSR and Eastern Europe Scientific Abstracts, Cybernetics, Computers and Automation Technology, Number 34

    Science.gov (United States)

    1978-07-26

    pp Ul-ljlt manuscript received 9 Mar 77 D0LG0P0L0V, ALEKSANDR SERGYEVICH, senior engineer, Pskov Radio Components Plant (Pskov) and...Jul 76 B0R0DKIN, A. M., B0R0DKIN, L. I., GURIN, N. N., KOGAN , YA. A., LYAPICHEVA, N. G. and MUCHNIK, I. B., Moscow [Abstract] The optimal speed...Kiev); GULYAYEV, ALEKSANDR IVANOVICH, candidate in technical sciences, RIUTs, Ministry of Public Health UkrSSR (Kiev); and DEMENTKOVA, ANNA

  2. The mining town of Pribram in science and technology. Abstracts of contributions

    International Nuclear Information System (INIS)

    1992-01-01

    The publication contains 125 abstracts of contributions presented at the conference, out of which 16 have been inputted in INIS. These primarily deal with uranium mining problems, although topics such as the irradiation of crystals, economic problems of coal mining, and spent fuel storage in the Slovak Republic are also included. Uranium ore is mined in the Czech Republic at various sites, using conventional mining as well as extraction by leaching. The environmental impacts of such activities and their contribution to population exposure are discussed. Attention is also paid to the future land reclamation at tailing dumping grounds. (M.D.)

  3. Electrochemically Modulated Gas/Liquid Separation Technology for In Situ Resource Utilization Process Streams, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — In this phase I program MicroCell Technologies, LLC (MCT) proposes to demonstrate the feasibility of an electrochemically modulated phase separator for in situ...

  4. Heat pipe technology. a bibliography with abstracts. Quarterly update, 31 March 1975

    International Nuclear Information System (INIS)

    1975-01-01

    Heat Pipe Technology is a continuing bibliographic summary of research on the subject of the heat pipe. The first volume was published in 1971. The 1972, 1973, and 1974 Annual Supplements have been published and distributed. This update cites additional references for 1975

  5. Alternative polymer separation technology by centrifugal force in a melted state

    International Nuclear Information System (INIS)

    Dobrovszky, Károly; Ronkay, Ferenc

    2014-01-01

    Highlights: • Waste separation should take place at high purity. • Developed a novel, alternative separation method, where the separation occurred in a melted state by centrifugal forces. • Possibility of separation two different plastics into neat fractions. • High purity fractions were established at granulates and also at prefabricated blend. • Results were verified by DSC, optical microscopy and Raman spectroscopy. - Abstract: In order to upgrade polymer waste during recycling, separation should take place at high purity. The present research was aimed to develop a novel, alternative separation opportunity, where the polymer fractions were separated by centrifugal force in melted state. The efficiency of the constructed separation equipment was verified by two immiscible plastics (polyethylene terephthalate, PET; low density polyethylene, LDPE), which have a high difference of density, and of which large quantities can also be found in the municipal solid waste. The results show that the developed equipment is suitable not only for separating dry blended mixtures of PET/LDPE into pure components again, but also for separating prefabricated polymer blends. By this process it becomes possible to recover pure polymer substances from multi-component products during the recycling process. The adequacy of results was verified by differential scanning calorimetry (DSC) measurement as well as optical microscopy and Raman spectroscopy

  6. Saline agriculture: A technology for economic utilization and improvement of saline environments (abstract)

    International Nuclear Information System (INIS)

    Aslam, Z.; Malik, K.A.; Khurshid, S.J.; Awan, A.R.; Akram, M.; Hashmi, Z.; Ali, Y.; Gulnaz, A.; Hussain, M.; Hussain, F.

    2005-01-01

    The salinity problem is one of the severe constraints for agriculture in Pakistan. In a socio-economic and salinity and drainage survey over an area of about 25000 acres of salt-affected land recently, crop production is found to be very low. Livestock is underfed and malnourished. Pakistan has spent and allocated over one billion US dollars on Salinity Control and Reclamation Projects (SCARP), of course, with dubious results. Over the years, a Saline Agriculture Technology has been developed as a cheap alternative at NIAB for comfortably living with salinity and to profitably utilize saline land rather than its reclamation. The soil improvement is a fringe benefit in this approach. The Saline Agriculture Technology has been tested at laboratory level, at field stations and at farms of some progressive farmers. Now we are sharing this technology with farming communities through a 'Saline Agriculture Farmer Participatory Development Project in Pakistan', with assistance from the National Rural Support Programme. The new project has been launched simultaneously in all four provinces of Pakistan on 25000 acres of salt-affected land. Under this project seeds of salt tolerant crop varieties wheat, cotton, rice, castor, brassica and barley and saplings of trees/shrubs, e.g. Acacia ampliceps, A. nilotica, Casuarina glauca, ber, jaman, etc selected for development work in various institutions of Pakistan are being provided to farmers. Know-how on new irrigation techniques like bed-and-corrugation and bed-and-furrow, agronomic practices like laser land leveling, planting on beds and in auger holes and soil/water amendment practices (use of gypsum and mineral acids) are being shared with farmers. These interventions are quite efficient, save water up to 40% and enable farmers to utilize bad quality water. In general, farmers are being familiarized with prevalent animal diseases, nutritional problems and prophylactic techniques. They are being helped in developing Saline

  7. R&D Opportunities for Membranes and Separation Technologies in Building Applications

    Energy Technology Data Exchange (ETDEWEB)

    Goetzler, William [Navigant Consulting Inc., Burlington, MA (United States); Guernsey, Matt [Navigant Consulting Inc., Burlington, MA (United States); Bargach, Youssef [Navigant Consulting Inc., Burlington, MA (United States)

    2017-10-01

    This report recommends innovative membrane and separation technologies that can assist the Building Technologies Office in achieving its 2030 goal. This report identifies research and development (R&D) initiatives across several building applications where further investigations could result in impactful savings.

  8. Limits to biogas technology: prospective for the R and D. Extended abstract

    International Nuclear Information System (INIS)

    Buffiere, P.; Bayard, R.; Germain, P.

    2009-12-01

    Perspectives of Research and Development on biogas have been identified based on an analysis of the scientific and technological limits. This study is based on two pillars: bibliography analysis and enquiry among experts and actors of the biogas world. The most urgent research orientations that have been identified can be distributed in three categories: - Research topics well covered by the R and D: organic matter characterization, fundamentals of anaerobic digestion mechanisms. - Research topics that could receive more attention by a better coordination between the research centers: process instrumentation, solid waste pretreatments. - Research topics that are poorly studied: energy from biogas (analytical problems, biogas purification, fuel cells), mechanical problems, mixing and rheology (especially for waste digestion), hydraulic and mass transfer (especially for landfilling and dry digestion). Other requirements have been identified: social aspects and process safety. The need for full size experimental investigations is also clearly expressed. (authors)

  9. Validation of International Classification of Diseases coding for bone metastases in electronic health records using technology-enabled abstraction.

    Science.gov (United States)

    Liede, Alexander; Hernandez, Rohini K; Roth, Maayan; Calkins, Geoffrey; Larrabee, Katherine; Nicacio, Leo

    2015-01-01

    The accuracy of bone metastases diagnostic coding based on International Classification of Diseases, ninth revision (ICD-9) is unknown for most large databases used for epidemiologic research in the US. Electronic health records (EHR) are the preferred source of data, but often clinically relevant data occur only as unstructured free text. We examined the validity of bone metastases ICD-9 coding in structured EHR and administrative claims relative to the complete (structured and unstructured) patient chart obtained through technology-enabled chart abstraction. Female patients with breast cancer with ≥1 visit after November 2010 were identified from three community oncology practices in the US. We calculated sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of bone metastases ICD-9 code 198.5. The technology-enabled abstraction displays portions of the chart to clinically trained abstractors for targeted review, thereby maximizing efficiency. We evaluated effects of misclassification of patients developing skeletal complications or treated with bone-targeting agents (BTAs), and timing of BTA. Among 8,796 patients with breast cancer, 524 had confirmed bone metastases using chart abstraction. Sensitivity was 0.67 (95% confidence interval [CI] =0.63-0.71) based on structured EHR, and specificity was high at 0.98 (95% CI =0.98-0.99) with corresponding PPV of 0.71 (95% CI =0.67-0.75) and NPV of 0.98 (95% CI =0.98-0.98). From claims, sensitivity was 0.78 (95% CI =0.74-0.81), and specificity was 0.98 (95% CI =0.98-0.98) with PPV of 0.72 (95% CI =0.68-0.76) and NPV of 0.99 (95% CI =0.98-0.99). Structured data and claims missed 17% of bone metastases (89 of 524). False negatives were associated with measurable overestimation of the proportion treated with BTA or with a skeletal complication. Median date of diagnosis was delayed in structured data (32 days) and claims (43 days) compared with technology-assisted EHR. Technology

  10. 99Mo/(99m)Tc separation: an assessment of technology options.

    Science.gov (United States)

    Dash, Ashutosh; Knapp, F F Russ; Pillai, M R A

    2013-02-01

    Several strategies for the effective separation of (99m)Tc from (99)Mo have been developed and validated. Due to the success of column chromatographic separation using acidic alumina coupled with high specific activity fission (99)Mo (F (99)Mo) for production of (99)Mo/(99m)Tc generators, however, most technologies until recently have generated little interest. The reduced availability of F (99)Mo and consequently the shortage of (99)Mo/(99m)Tc column generators in the recent past have resurrected interest in the production of (99)Mo as well as (99m)Tc by alternate routes. Most of these alternative production processes require separation techniques capable of providing clinical grade (99m)Tc from low specific activity (99)Mo or irradiated Mo targets. For this reason there has been renewed interest in alternate separation routes. This paper reviews the reported separation technologies which include column chromatography, solvent extraction, sublimation and gel systems that have been traditionally used for the fabrication of (99)Mo/(99m)Tc generator systems. The comparative advantage, disadvantage, and technical challenges toward adapting the emerging requirements are discussed. New developments such as solid-phase column extraction, electrochemical separation, extraction chromatography, supported liquid membrane (SLM) and thermochromatographic techniques are also being evaluated for their potential application in the changed scenario of providing (99m)Tc from alternate routes. Based on the analysis provided in this review, it appears that some proven separation technologies can be quickly resurrected for the separation of clinical grade (99m)Tc from macroscopic levels of reactor or cyclotron irradiated molybdenum targets. Furthermore, emerging technologies can be developed further to respond to the expected changing modes of (99m)Tc production. Copyright © 2013 Elsevier Inc. All rights reserved.

  11. Managing tight-binding receptors for new separations technologies. 1998 annual progress report

    International Nuclear Information System (INIS)

    Busch, D.H.; Givens, R.S.

    1998-01-01

    'Whereas such traditional separation methodologies as ion exchange and solvent extraction require rapid interaction between ligands and metal ions, the most strongly binding ligands invariably bind slowly; e.g., cryptates bind and dissociate more slowly than macrocycles, which are slower than open-chain chelating ligands. This project seeks to maximize the binding and dissociation rates for tight-binding receptors in order to make them more useful to separations science. An alternative slow-binding technology is also under exploration.'

  12. Research on preventive technologies for bed-separation water hazard in China coal mines

    Science.gov (United States)

    Gui, Herong; Tong, Shijie; Qiu, Weizhong; Lin, Manli

    2018-03-01

    Bed-separation water is one of the major water hazards in coal mines. Targeted researches on the preventive technologies are of paramount importance to safe mining. This article studied the restrictive effect of geological and mining factors, such as lithological properties of roof strata, coal seam inclination, water source to bed separations, roof management method, dimensions of mining working face, and mining progress, on the formation of bed-separation water hazard. The key techniques to prevent bed-separation water-related accidents include interception, diversion, destructing the buffer layer, grouting and backfilling, etc. The operation and efficiency of each technique are corroborated in field engineering cases. The results of this study will offer reference to countries with similar mining conditions in the researches on bed-separation water burst and hazard control in coal mines.

  13. Co-crystallization as a separation technology: controlling product concentrations by co-crystals

    NARCIS (Netherlands)

    Urbanus, J.; Roelands, C.P.M.; Verdoes, D.; Jansens, P.J.; Horst, J.H. ter

    2010-01-01

    Co-crystallization is known as a product formulation technology, but it can also be used as a tool to solve crystallization problems. Product removal by co-crystallization in fermentations is used as a showcase to demonstrate the potential of co-crystallization as a separation technique. In

  14. 11-th International conference Nuclear power safety and nuclear education - 2009. Abstracts. Part 1. Session: Safety of nuclear technology; Innovative nuclear systems and fuel cycle; Nuclear knowledge management

    International Nuclear Information System (INIS)

    2009-01-01

    The book includes abstracts of the 11-th International conference Nuclear power safety and nuclear education - 2009 (29 Sep - 2 Oct, 2009, Obninsk). Problems of safety of nuclear technology are discussed, innovative nuclear systems and fuel cycles are treated. Abstracts on professional education for nuclear power and industry are presented. Nuclear knowledge management are discussed

  15. Separation Science and Technology. Semiannual progress report, April 1993--September 1993

    International Nuclear Information System (INIS)

    Vandegrift, G.F.; Chamberlain, D.B.; Conner, C.

    1996-01-01

    This document reports on the work done by the Separations Science and Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period April-September 1993. This effort is mainly concerned with developing the TRUEX process for removing and concentrating actinides from acidic waste streams contaminated with transuranic (TRU) elements. The objectives of TRUEX processing are to recover valuable TRU elements and to lower disposal costs for the nonTRU waste product of the process. Other projects are underway with the objective of developing (1) evaporation technology for concentrating radioactive waste and product streams such as those generated by the TRUEX process, (2) treatment schemes for liquid wastes stored or being generated at Argonne, (3) a process based on sorbing modified TRUEX solvent on magnetic beads to be used for separation of contaminants from radioactive and hazardous waste streams, and (4) a process that uses low-enriched uranium targets for production of 99 Mo for nuclear medicine uses

  16. Preliminary survey of separations technology applicable to the pretreatment of Hanford tank waste (1992--1993)

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence, W.E.; Kurath, D.E.

    1994-04-01

    The US Department of Energy has established the Tank Waste Remediation System (TWRS) to manage and dispose of radioactive wastes stored at the Hanford Site. Within this program are evaluations of pretreatment system alternatives through literature reviews. The information in this report was collected as part of this project at Pacific Northwest Laboratory. A preliminary survey of literature on separations recently entered into the Hanford electronic databases (1992--1993) that have the potential for pretreatment of Hanford tank waste was conducted. Separation processes that can assist in the removal of actinides (uranium, plutonium, americium), lanthanides, barium, {sup 137}Cs, {sup 90}Sr,{sup 129 }I, {sup 63}Ni, and {sup 99}Tc were evaluated. Separation processes of interest were identified through literature searches, journal reviews, and participation in separation technology conferences. This report contains brief descriptions of the potential separation processes, the extent and/or selectivity of the separation, the experimental conditions, and observations. Information was collected on both national and international separation studies to provide a global perspective on recent research efforts.

  17. Preliminary survey of separations technology applicable to the pretreatment of Hanford tank waste (1992--1993)

    International Nuclear Information System (INIS)

    Lawrence, W.E.; Kurath, D.E.

    1994-04-01

    The US Department of Energy has established the Tank Waste Remediation System (TWRS) to manage and dispose of radioactive wastes stored at the Hanford Site. Within this program are evaluations of pretreatment system alternatives through literature reviews. The information in this report was collected as part of this project at Pacific Northwest Laboratory. A preliminary survey of literature on separations recently entered into the Hanford electronic databases (1992--1993) that have the potential for pretreatment of Hanford tank waste was conducted. Separation processes that can assist in the removal of actinides (uranium, plutonium, americium), lanthanides, barium, 137 Cs, 90 Sr, 129 I, 63 Ni, and 99 Tc were evaluated. Separation processes of interest were identified through literature searches, journal reviews, and participation in separation technology conferences. This report contains brief descriptions of the potential separation processes, the extent and/or selectivity of the separation, the experimental conditions, and observations. Information was collected on both national and international separation studies to provide a global perspective on recent research efforts

  18. Assessment of the Technologies for Molecular Biodosimetry for Human Low-Dose Radiation Exposure Symposium: Agenda and Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    Coleman, Matthew A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ramakrishnan, Narayani [National Inst. of Allergy and Infectious Diseases, Bethesda, MD (United States)

    2009-11-16

    In the event of a radiological accident, the rapid evaluation of the individual absorbed dose is paramount to discriminate those individuals who must receive medical attention. New research with genomic- and proteomic-wide tools is showing that within minutes to hours after exposure to ionizing radiation the cellular machinery is modified. For example: large-scale changes occur in the gene expression profiles involving a broad variety of cellular pathways after a wide range of both low dose (<10 cGy) and high dose (>10 cGy) ionizing radiation exposures. Symposium 12 was organized to address a wide range of biological effects using the latest technologies. To address current models following ionizing radiation exposure, methods in biodosimetry and dose effects the symposia featured a general overview titled “Model Systems and Current Approaches in Biodosimetry” by Matthew A. Coleman, from Lawrence Livermore National Laboratory and a talk entitled “Brief Overview of Biodosimetry Projects in the NIH Rad/Nuc Program” by Dr. Narayani Ramakrishnan, National Institute of Allergy and Infectious Diseases. These two talk set the tone for issues in data and model integration as well as addressing the national need for robust technologies for biological dosimetry. The report continues with more description of the presentations, along with the agenda and abstracts of the papers presented.

  19. Freeze-drying technology: A separation technique for liquid nuclear materials

    International Nuclear Information System (INIS)

    Musgrave, J.A.; Efurd, D.W.; Banar, J.C.

    1997-01-01

    Freeze-drying technology (FDT) has been around for several decades as a separation technology. Most commonly, FDT is associated with the processing of food, but the largest industrial-scale use of FDT is in the pharmaceutical industry. Through a Cooperative Research and Development Agreement (CRADA) with BOC Edwards Calumatic, we are demonstrating the feasibility of FDT as a waste minimization and pollution prevention technology. This is a novel and innovative application of FDT. In addition, we plan to demonstrate that the freeze-dried residue is an ideal feed material for ceramic stabilization of radioactive waste and excess fissile material. The objective of this work is to demonstrate the feasibility of FDT for the separation of complex radioactive and nonradioactive materials, including liquids, slurries, and sludges containing a wide variety of constituents in which the separation factors are >10 8 . This is the first application of FDT in which the condensate is of primary importance. Our focus is applying this technology to the elimination of radioactive liquid discharges from facilities at Los Alamos National Laboratory (LANL) and within the U.S. Department of Energy complex; however, successful demonstration will lead to nuclear industry-wide applications

  20. Separation technology for radioactive iodine from off-gas streams of nuclear facilities

    International Nuclear Information System (INIS)

    Fukasawa, Tetsuo; Funabashi, Kiyomi; Kondo, Yoshikazu.

    1994-01-01

    Iodine separation technology using an inorganic adsorption material has been investigated in order to apply the technology to the off-gas treatment systems of nuclear facilities. Iodine removal efficiencies were checked by laboratory experiments using simulated off-gas streams of various conditions and the developed adsorbent, silver impregnated alumina (AgA). Laboratory test results demonstrated effective iodine removal with high decontamination factors (DF's) at relatively high temperatures (≥100degC). Then the removal efficiency were confirmed using actual off-gas streams sampled from the dissolver off-gas treatment system of the Karlsruhe reprocessing plant. The DF's were over 10 3 with the AgA bed depth of 10 cm and showed little change during the adsorption period, which indicated applicability of the iodine removal technology with AgA to nuclear fuel reprocessing plants. Iodine absorption capacity and its release property were also investigated using simulated off-gas streams. The former had a value of ∼0.22 g/g-AgA and this value could well predict the breakthrough property. The adsorbed iodine was judged stable during the storage of AgA saturated with iodine in air at temperatures below 500degC and in water at ∼20degC after changing the adsorbed iodine form from AgIO 3 to AgI. Thus, the separation technology provided effective and stable iodine separation from the off-gas of nuclear facilities. (author)

  1. Energy Saving Separations Technologies for the Petroleum Industry: An Industry-University-National Laboratory Research Partnership

    Energy Technology Data Exchange (ETDEWEB)

    Dorgan, John R.; Stewart, Frederick F.; Way, J. Douglas

    2003-03-28

    This project works to develop technologies capable of replacing traditional energy-intensive distillations so that a 20% improvement in energy efficiency can be realized. Consistent with the DOE sponsored report, Technology Roadmap for the Petroleum Industry, the approach undertaken is to develop and implement entirely new technology to replace existing energy intensive practices. The project directly addresses the top priority issue of developing membranes for hydrocarbon separations. The project is organized to rapidly and effectively advance the state-of-the-art in membranes for hydrocarbon separations. The project team includes ChevronTexaco and BP, major industrial petroleum refiners, who will lead the effort by providing matching resources and real world management perspective. Academic expertise in separation sciences and polymer materials found in the Chemical Engineering and Petroleum Refining Department of the Colorado School of Mines is used to invent, develop, and test new membrane materials. Additional expertise and special facilities available at the Idaho National Engineering and Environmental Laboratory (INEEL) are also exploited in order to effectively meet the goals of the project. The proposed project is truly unique in terms of the strength of the team it brings to bear on the development and commercialization of the proposed technologies.

  2. Pyrochemical separations technologies envisioned for the U. S. accelerator transmutation of waste system

    Energy Technology Data Exchange (ETDEWEB)

    Laidler, J. J.

    2000-02-17

    A program has been initiated for the purpose of developing the chemical separations technologies necessary to support a large Accelerator Transmutation of Waste (ATW) system capable of dealing with the projected inventory of spent fuel from the commercial nuclear power stations in the United States. The baseline process selected combines aqueous and pyrochemical processes to enable the efficient separation of uranium, technetium, iodine, and the transuranic elements from LWR spent fuel. The diversity of processing methods was chosen for both technical and economic factors. A six-year technology evaluation and development program is foreseen, by the end of which an informed decision can be made on proceeding with demonstration of the ATW system.

  3. [Use of fractional plasma separation and adsorption (Prometheus technology) in the treatment of acute liver failure].

    Science.gov (United States)

    Denisova, E N; Sharipova, V R; Purlo, N V; Sukhanova, G A; Biriukova, L S

    2009-01-01

    This paper presents the results of treating 8 patients with acute liver failure, by using the separation and adsorption of fractional plasma (Prometheus technology). Twenty-five procedures lasting 5-6 hours were performed. Anticoagulation with heparin was made under guidance of coagulogram parameters. The results of testing blood parameters before and after a procedure and hemodynamic parameters are given. The investigations have demonstrated the effectiveness and safety of the procedure.

  4. Airborne Separation Assurance and Traffic Management: Research of Concepts and Technology

    Science.gov (United States)

    Ballin, Mark G.; Wing, David J.; Hughes, Monica F.; Conway, Sheila R.

    1999-01-01

    To support the need for increased flexibility and capacity in the future National Airspace System, NASA is pursuing an approach that distributes air traffic separation and management tasks to both airborne and ground-based systems. Details of the distributed operations and the benefits and technical challenges of such a system are discussed. Technology requirements and research issues are outlined, and NASA s approach for establishing concept feasibility, which includes development of the airborne automation necessary to support the concept, is described.

  5. The suspended magnetic separator with large blocks from NdFeB magnets and its long term technological tests

    Czech Academy of Sciences Publication Activity Database

    Žežulka, Václav; Straka, Pavel

    2011-01-01

    Roč. 8, č. 1 (2011), s. 89-97 ISSN 1214-9705 Institutional research plan: CEZ:AV0Z30460519 Keywords : magnetic separation * magnetic separators * magnetic circuits Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.530, year: 2011 http://www.irsm.cas.cz/abstracts/AGG/01_11/8_Zezulka.pdf

  6. Separations Science and Technology, Semiannual progress report, October 1991--March 1992

    International Nuclear Information System (INIS)

    Vandegrift, G.F.; Betts, S.; Chamberlain, D.B.

    1994-01-01

    This document reports on the work done by the Separations Science and Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period October 1991--March 1992. This effort is mainly concerned with developing the TRUEX process for removing and concentrating actinides from acidic waste streams contaminated with transuranic (TRU) elements. The objectives of TRUEX processing are to recover valuable TRU elements and to lower disposal costs for the nonTRU waste product of the process. Two other projects are underway with the objective of developing (1) a membrane-assisted solvent extraction method for treating natural and process waters contaminated by volatile organic compounds and (2) evaporation technology for concentrating radioactive waste and product streams such as those generated by the TRUEX process

  7. Separations Science and Technology, Semiannual progress report, October 1991--March 1992

    Energy Technology Data Exchange (ETDEWEB)

    Vandegrift, G.F.; Betts, S.; Chamberlain, D.B. [and others

    1994-01-01

    This document reports on the work done by the Separations Science and Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period October 1991--March 1992. This effort is mainly concerned with developing the TRUEX process for removing and concentrating actinides from acidic waste streams contaminated with transuranic (TRU) elements. The objectives of TRUEX processing are to recover valuable TRU elements and to lower disposal costs for the nonTRU waste product of the process. Two other projects are underway with the objective of developing (1) a membrane-assisted solvent extraction method for treating natural and process waters contaminated by volatile organic compounds and (2) evaporation technology for concentrating radioactive waste and product streams such as those generated by the TRUEX process.

  8. Carbon Dioxide Separation from Flue Gases: A Technological Review Emphasizing Reduction in Greenhouse Gas Emissions

    Directory of Open Access Journals (Sweden)

    Mohammad Songolzadeh

    2014-01-01

    Full Text Available Increasing concentrations of greenhouse gases (GHGs such as CO2 in the atmosphere is a global warming. Human activities are a major cause of increased CO2 concentration in atmosphere, as in recent decade, two-third of greenhouse effect was caused by human activities. Carbon capture and storage (CCS is a major strategy that can be used to reduce GHGs emission. There are three methods for CCS: pre-combustion capture, oxy-fuel process, and post-combustion capture. Among them, post-combustion capture is the most important one because it offers flexibility and it can be easily added to the operational units. Various technologies are used for CO2 capture, some of them include: absorption, adsorption, cryogenic distillation, and membrane separation. In this paper, various technologies for post-combustion are compared and the best condition for using each technology is identified.

  9. The U.S. Advanced Fuel Cycle Initiative: Development of separations technologies

    International Nuclear Information System (INIS)

    Laidler, James J.; Bresee, James C.

    2004-01-01

    Spent nuclear fuel from 103 operating U.S. commercial nuclear power reactors is accumulating at a rate of about 2,000 metric tons per year. At this rate, the legislated capacity of the Yucca Mountain geologic repository (63,000 tons of commercial spent fuel) will be exceeded by 2015. Accordingly, the U.S. Department of Energy has instituted a new program, the Advanced Fuel Cycle Initiative, which is intended to provide the technologies necessary for the economical and environmentally sound processing of spent fuel. The goal of this technology development program is to preclude or significantly delay the need for a second geologic repository. Separations technologies are being developed that will support the processing of commercial spent fuel as well as the spent fuel arising from the operation of future advanced reactors

  10. The Investigation of Separability of Particles Smaller Than 5 mm by Eddy Current Separation Technology. Part I : Rotating Type Eddy Current Separators

    NARCIS (Netherlands)

    Zhang, S.; Rem, P.C.; Forssberg, E.

    1999-01-01

    Owing to the growing emergence of the end-of-life electrical and electronic products with complex material structures and an ever-diminishing particle size of the valuable metals involved, development of eddy current separators (ECS) has been targeting selective separation of small non-ferrous metal

  11. Natural radiation environment III. [Lead Abstract

    Energy Technology Data Exchange (ETDEWEB)

    Gesell, T.F.; Lowder, W.M. (eds.)

    1980-01-01

    Separate abstracts were prepared for the 52 research papers presented at this symposium in April 1978. The major topics in this volume deal with penetrating radiation measurements, radiation surveys and population exposure, radioactivity in the indoor environment, and technologically enhanced natural radioactivity. (KRM)

  12. Separation Science and Technology. Semiannual progress report, April 1993--September 1993

    Energy Technology Data Exchange (ETDEWEB)

    Vandegrift, G.F.; Chamberlain, D.B.; Conner, C. [and others

    1996-01-01

    This document reports on the work done by the Separations Science and Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period April-September 1993. This effort is mainly concerned with developing the TRUEX process for removing and concentrating actinides from acidic waste streams contaminated with transuranic (TRU) elements. The objectives of TRUEX processing are to recover valuable TRU elements and to lower disposal costs for the nonTRU waste product of the process. Other projects are underway with the objective of developing (1) evaporation technology for concentrating radioactive waste and product streams such as those generated by the TRUEX process, (2) treatment schemes for liquid wastes stored or being generated at Argonne, (3) a process based on sorbing modified TRUEX solvent on magnetic beads to be used for separation of contaminants from radioactive and hazardous waste streams, and (4) a process that uses low-enriched uranium targets for production of {sup 99}Mo for nuclear medicine uses.

  13. Separation science and technology. Semiannual progress report, October 1993--March 1994

    Energy Technology Data Exchange (ETDEWEB)

    Vandegrift, G.F.; Aase, S.B.; Buchholz, B. [and others

    1997-12-01

    This document reports on the work done by the Separations Science and Technology Programs of the Chemical Technology Division, Argonne National Laboratory (ANL), in the period October 1993-March 1994. This effort is mainly concerned with developing the TRUEX process for removing and concentrating actinides from acidic waste streams contaminated with transuranic (TRU) elements. The objectives of TRUEX processing are to recover valuable TRU elements and to lower disposal costs for the nonTRU waste product of the process. Other projects are underway with the objective of developing (1) evaporation technology for concentrating radioactive waste and product streams such as those generated by the TRUEX process, (2) treatment schemes for liquid wastes stored are being generated at ANL, (3) a process based on sorbing modified TRUEX solvent on magnetic beads to be used for separation of contaminants from radioactive and hazardous waste streams, and (4) a process that uses low-enriched uranium targets for production of {sup 99}Mo for nuclear medicine uses.

  14. Separation science and technology. Semiannual progress report, October 1993 - March 1994

    International Nuclear Information System (INIS)

    Vandegrift, G.F.; Aase, S.B.; Buchholz, B.

    1997-12-01

    This document reports on the work done by the Separations Science and Technology Programs of the Chemical Technology Division, Argonne National Laboratory (ANL), in the period October 1993-March 1994. This effort is mainly concerned with developing the TRUEX process for removing and concentrating actinides from acidic waste streams contaminated with transuranic (TRU) elements. The objectives of TRUEX processing are to recover valuable TRU elements and to lower disposal costs for the nonTRU waste product of the process. Other projects are underway with the objective of developing (1) evaporation technology for concentrating radioactive waste and product streams such as those generated by the TRUEX process, (2) treatment schemes for liquid wastes stored are being generated at ANL, (3) a process based on sorbing modified TRUEX solvent on magnetic beads to be used for separation of contaminants from radioactive and hazardous waste streams, and (4) a process that uses low-enriched uranium targets for production of 99 Mo for nuclear medicine uses

  15. LLNL medical and industrial laser isotope separation: large volume, low cost production through advanced laser technologies

    International Nuclear Information System (INIS)

    Comaskey, B.; Scheibner, K. F.; Shaw, M.; Wilder, J.

    1998-01-01

    The goal of this LDRD project was to demonstrate the technical and economical feasibility of applying laser isotope separation technology to the commercial enrichment (>lkg/y) of stable isotopes. A successful demonstration would well position the laboratory to make a credible case for the creation of an ongoing medical and industrial isotope production and development program at LLNL. Such a program would establish LLNL as a center for advanced medical isotope production, successfully leveraging previous LLNL Research and Development hardware, facilities, and knowledge

  16. Improvements on heavy water separation technology by isotopic water-hydrogen sulfide exchange

    International Nuclear Information System (INIS)

    Peculea, M.

    1987-01-01

    A series of possible variance is presented for the heavy water separation technology by isotopic H 2 O-H 2 S exchange at dual temperatures. The critical study of these variants, which are considered as characteristic quantities for the isotopes transport (production) and the extraction level is related to a dual temperature plant fed by liquid and cold column, which is the up-to-date technology employed in all heavy water production plants as variants of following plants are studied: dual temperature plant with double feeding; dual-temperature plant with equilibrium column (booster); dual-temperature-dual-pressure plant. Attention is paid to the variant with equilibration column (booster), executed and tested at the State Committee for Nuclear Energy and to the dual-temperature-dual pressure plant which presents the highest efficiency. (author)

  17. Advanced Acid Gas Separation Technology for the Utilization of Low Rank Coals

    Energy Technology Data Exchange (ETDEWEB)

    Kloosterman, Jeff

    2012-12-31

    Air Products has developed a potentially ground-breaking technology – Sour Pressure Swing Adsorption (PSA) – to replace the solvent-based acid gas removal (AGR) systems currently employed to separate sulfur containing species, along with CO{sub 2} and other impurities, from gasifier syngas streams. The Sour PSA technology is based on adsorption processes that utilize pressure swing or temperature swing regeneration methods. Sour PSA technology has already been shown with higher rank coals to provide a significant reduction in the cost of CO{sub 2} capture for power generation, which should translate to a reduction in cost of electricity (COE), compared to baseline CO{sub 2} capture plant design. The objective of this project is to test the performance and capability of the adsorbents in handling tar and other impurities using a gaseous mixture generated from the gasification of lower rank, lignite coal. The results of this testing are used to generate a high-level pilot process design, and to prepare a techno-economic assessment evaluating the applicability of the technology to plants utilizing these coals.

  18. Membrane Materials and Technology for Xylene Isomers Separation and Isomerization via Pervaporation

    KAUST Repository

    Bilaus, Rakan

    2014-11-01

    P-xylene is one of the highly influential commodities in the petrochemical industry. It is used to make 90% of the world’s third largest plastic production, polyethylene terephthalate (PET). With a continuously increasing demand, the current technology’s high energy intensity has become a growing concern. Membrane separation technology is a potential low-energy alternative. Polymeric membranes were investigated in a pervaporation experiment to separate xylene isomers. Polymers of intrinsic microporosity (PIMs) as well as polyimides (PIM-PI), including thermally cross-linked PIM-1, PIM-6FDA-OH and thermally-rearranged PIM-6FDA-OH were investigated as potential candidates. Although they exhibited extremely high permeability to xylenes, selectivity towards p-xylene was poor. This was attributed to the polymers low chemical resistance which was apparent in their strong tendency to swell in xylenes. Consequently, a perfluoro-polymer, Teflon AF 2400, with a high chemical resistance was tested, which resulted in a slightly improved selectivity. A super acid sulfonated perfluoro-polymer (Nafion-H) was used as reactive membrane for xylenes isomerization. The membrane exhibited high catalytic activity, resulting in 19.5% p-xylene yield at 75ᵒC compared to 20% p-xylene yield at 450ᵒC in commercial fixed bed reactors. Nafion-H membrane outperforms the commercial technology with significant energy savings.

  19. Separators used in microbial electrochemical technologies: Current status and future prospects.

    Science.gov (United States)

    Daud, Siti Mariam; Kim, Byung Hong; Ghasemi, Mostafa; Daud, Wan Ramli Wan

    2015-11-01

    Microbial electrochemical technologies (METs) are emerging green processes producing useful products from renewable sources without causing environmental pollution and treating wastes. The separator, an important part of METs that greatly affects the latter's performance, is commonly made of Nafion proton exchange membrane (PEM). However, many problems have been identified associated with the Nafion PEM such as high cost of membrane, significant oxygen and substrate crossovers, and transport of cations other than protons protons and biofouling. A variety of materials have been offered as alternative separators such as ion-exchange membranes, salt bridges, glass fibers, composite membranes and porous materials. It has been claimed that low cost porous materials perform better than PEM. These include J-cloth, nylon filter, glass fiber mat, non-woven cloth, earthen pot and ceramics that enable non-ion selective charge transfer. This paper provides an up-to-date review on porous separators and plots directions for future studies. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. BALWOIS: Abstracts

    International Nuclear Information System (INIS)

    Morell, Morell; Todorovik, Olivija; Dimitrov, Dobri

    2004-01-01

    anthropogenic pressures and international shared water. Here are the 320 abstracts proposed by authors and accepted by the Scientific Committee. More than 200 papers are presented during the Conference on 8 topics related to Hydrology, Climatology and Hydro biology: - Climate and Environment; - Hydrological regimes and water balances; - Droughts and Floods; -Integrated Water Resources Management; -Water bodies Protection and Eco hydrology; -Lakes; -Information Systems for decision support; -Hydrological modelling. Papers relevant to INIS are indexed separately

  1. Proceedings of the thirty second national symposium on plasma science and technology: plasma for societal benefits: book of abstracts

    International Nuclear Information System (INIS)

    Dave, Sandhya; Shravan Kumar, S.; Vijayakumaran; Singh, Raj; Awasthi, L.M.

    2017-01-01

    This symposium covers topics on: basic plasma, computer modelling for plasma, exotic plasma, industrial plasma, laser plasma theory, nuclear fusion, plasma diagnostics, laser plasma, plasma processing, pulsed power, space and astrophysical plasma. Papers relevant to INIS are indexed separately

  2. Lamination technology for separation of solid wastes; La tecnologia de la Laminacion para separacion de residuos solidos compuestos

    Energy Technology Data Exchange (ETDEWEB)

    Rocas, J.

    1998-07-01

    The lamination technology has been developed, and introduces a form of separation of solid wastes totally new in its concept and development. No longer will be a problem the economic and ecological efficient separation of wastes like tetra-brick, compound of metals and plastics, aluminum scum, electric or electronic wastes and many other. (Author)

  3. Development of Ultrafiltration Membrane-Separation Technology for Energy-Efficient Water Treatment and Desalination Process

    Energy Technology Data Exchange (ETDEWEB)

    Yim, Woosoon [Univ. of Nevada, Las Vegas, NV (United States); Bae, Chulsung [Rensselaer Polytechnic Inst., Troy, NY (United States)

    2016-10-28

    The growing scarcity of fresh water is a major political and economic challenge in the 21st century. Compared to thermal-based distillation technique of water production, pressure driven membrane-based water purification process, such as ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO), can offer more energy-efficient and environmentally friendly solution to clean water production. Potential applications also include removal of hazardous chemicals (i.e., arsenic, pesticides, organics) from water. Although those membrane-separation technologies have been used to produce drinking water from seawater (desalination) and non-traditional water (i.e., municipal wastewater and brackish groundwater) over the last decades, they still have problems in order to be applied in large-scale operations. Currently, a major huddle of membrane-based water purification technology for large-scale commercialization is membrane fouling and its resulting increases in pressure and energy cost of filtration process. Membrane cleaning methods, which can restore the membrane properties to some degree, usually cause irreversible damage to the membranes. Considering that electricity for creating of pressure constitutes a majority of cost (~50%) in membrane-based water purification process, the development of new nano-porous membranes that are more resistant to degradation and less subject to fouling is highly desired. Styrene-ethylene/butylene-styrene (SEBS) block copolymer is one of the best known block copolymers that induces well defined morphologies. Due to the polarity difference of aromatic styrene unit and saturated ethylene/butylene unit, these two polymer chains self-assemble each other and form different phase-separated morphologies depending on the ratios of two polymer chain lengths. Because the surface of SEBS is hydrophobic which easily causes fouling of membrane, incorporation of ionic group (e,g, sulfonate) to the polymer is necessary to reduces fouling

  4. Technology Evaluation in the Elderly Abstracts from the meeting held in Toronto, September 21?23, 2014

    OpenAIRE

    Muscedere, John; Kolomitro, Klodiana; Stockley, Denise; Barrie, Carol; Elliott, J.; Guenette, M.; Sneyers, B.; Little, A.; Perreault, M.M.; Rose, L.; Burry, L.; Hunt, Cindy; Ennis, Naomi; Ouchterlony, Donna; McNeil, Heather

    2015-01-01

    Technology Evaluation in the Elderly Network (TVN) was funded in July 2012 under the Canadian Networks of Centres of Excellence (NCE) program, to develop, rigorously evaluate, and ethically disseminate information about the use of technologies for the care of seriously ill elderly patients and their families. TVN?s vision is to position Canada as a global leader in providing the highest quality of care for its aging population. The focus is on the frail elderly with multiple chronic condition...

  5. Abstract algebra

    CERN Document Server

    Garrett, Paul B

    2007-01-01

    Designed for an advanced undergraduate- or graduate-level course, Abstract Algebra provides an example-oriented, less heavily symbolic approach to abstract algebra. The text emphasizes specifics such as basic number theory, polynomials, finite fields, as well as linear and multilinear algebra. This classroom-tested, how-to manual takes a more narrative approach than the stiff formalism of many other textbooks, presenting coherent storylines to convey crucial ideas in a student-friendly, accessible manner. An unusual feature of the text is the systematic characterization of objects by universal

  6. Using detailed inter-network simulation and model abstraction to investigate and evaluate joint battlespace infosphere (JBI) support technologies

    Science.gov (United States)

    Green, David M.; Dallaire, Joel D.; Reaper, Jerome H.

    2004-08-01

    The Joint Battlespace Infosphere (JBI) program is performing a technology investigation into global communications, data mining and warehousing, and data fusion technologies by focusing on techniques and methodologies that support twenty first century military distributed collaboration. Advancement of these technologies is vitally important if military decision makers are to have the right data, in the right format, at the right time and place to support making the right decisions within available timelines. A quantitative understanding of individual and combinational effects arising from the application of technologies within a framework is presently far too complex to evaluate at more than a cursory depth. In order to facilitate quantitative analysis under these circumstances, the Distributed Information Enterprise Modeling and Simulation (DIEMS) team was formed to apply modeling and simulation (M&S) techniques to help in addressing JBI analysis challenges. The DIEMS team has been tasked utilizing collaborative distributed M&S architectures to quantitatively evaluate JBI technologies and tradeoffs. This paper first presents a high level view of the DIEMS project. Once this approach has been established, a more concentrated view of the detailed communications simulation techniques used in generating the underlying support data sets is presented.

  7. Article Abstract

    African Journals Online (AJOL)

    Abstract. Simple learning tools to improve clinical laboratory practical skills training. B Taye, BSc, MPH. Addis Ababa University, College of Health Sciences, Addis Ababa, ... concerns about the competence of medical laboratory science graduates. ... standardised practical learning guides and assessment checklists would.

  8. Abstract Introduction

    African Journals Online (AJOL)

    Abstract. Cyclic ovarian activity and plasma progesterone (P4) concentrations were assessed for 179 days in 5. (free grazing) and 6 (free grazing + high energy and protein-supplemented) normocyclic donkeys. In addition, plasma p4 and cortisol were measured in blood samples collected at J5·min intervals in the.

  9. Abstract Introduction

    African Journals Online (AJOL)

    cce

    Abstract. Hemoglobin is a tetrameric protein which is able to dissociate into dimers. The dimers can in turn dissociate into tetramers. It has been found that dimers are more reactive than tetramers. The difference in the reactivity of these two species has been used to determine the tetramer- dimer dissociation constant of ...

  10. Assessment of Carbon- and Metal-Based Nanoparticle DNA Damage with Microfluidic Electrophoretic Separation Technology.

    Science.gov (United States)

    Schrand, Amanda M; Powell, Thomas; Robertson, Tiffany; Hussain, Saber M

    2015-02-01

    In this study, we examined the feasibility of extracting DNA from whole cell lysates exposed to nanoparticles using two different methodologies for evaluation of fragmentation with microfluidic electrophoretic separation. Human lung macrophages were exposed to five different carbon- and metal-based nanoparticles at two different time points (2 h, 24 h) and two different doses (5 µg/ml, 100 µg/ml). The primary difference in the banding patterns after 2 h of nanoparticle exposure is more DNA fragmentation at the higher NP concentration when examining cells exposed to nanoparticles of the same composition. However, higher doses of carbon and silver nanoparticles at both short and long dosing periods can contribute to erroneous or incomplete data with this technique. Also comparing DNA isolation methodologies, we recommend the centrifugation extraction technique, which provides more consistent banding patterns in the control samples compared to the spooling technique. Here we demonstrate that multi-walled carbon nanotubes, 15 nm silver nanoparticles and the positive control cadmium oxide cause similar DNA fragmentation at the short time point of 2 h with the centrifugation extraction technique. Therefore, the results of these studies contribute to elucidating the relationship between nanoparticle physicochemical properties and DNA fragmentation results while providing the pros and cons of altering the DNA isolation methodology. Overall, this technique provides a high throughput way to analyze subcellular alterations in DNA profiles of cells exposed to nanomaterials to aid in understanding the consequences of exposure and mechanistic effects. Future studies in microfluidic electrophoretic separation technologies should be investigated to determine the utility of protein or other assays applicable to cellular systems exposed to nanoparticles.

  11. Development of Decontamination Technology for Separating Radioactive Constituents from Contaminated Concrete Waste

    International Nuclear Information System (INIS)

    Min, B. Y.; Kim, G. N.; Lee, G. W.; Choi, W. K.; Jung, U. S.

    2010-01-01

    The large amount of contaminated concrete produced during decommissioning procedures and available decontamination. In Korea, more than more than 60 tons of concrete wastes contaminated with uranium compounds have been generated from UCP (Uranium Conversion Plant) by dismantling. A recycling or a volume reduction of the concrete wastes through the application of appropriate treatment technologies have merits from the view point of an increase in a resource recycling as well as a decrease in the amount of wastes to be disposed of resulting in a reduction of a disposal cost and an enhancement of the disposal safety. For unconditional release of building and reduction of radioactive concrete waste, mechanical methods and thermal stress methods have been selected. In the advanced countries, such as France, Japan, Germany, Sweden, and Belgium, techniques for reduction and reuse of the decommissioning concrete wastes have applied to minimize the total radioactive concrete waste volume by thermal and mechanical processes. It was found that volume reduction of contaminated concrete can be achieved by separation of the fine cement stone and coarse gravel. Typically, the contaminated layer is only 1∼10mm thick because cementitious materials are porous media, the penetration of radionuclides may occur up to several centimenters from the surface of a material. Most of the dismantled concrete wastes are slightly contaminated rather than activated. This decontamination can be accomplished during the course of a separation of the concrete wastes contaminated with radioactive materials through a thermal treatment step of the radionuclide (e.g. cesium and strontium), transportation of the radionuclide to fine aggregates through a mechanical treatment step. Concrete is a structural material which generally consists of a binder (cement), water, and aggregate. The interaction between highly charged calcium silicate hydrate (C-S-H) particles in the presence of divalent calcium

  12. Abstract Introduction

    African Journals Online (AJOL)

    cce

    . Babalola, J. O.. Chemistry Department, Faculty of Science, University of Ibadan, Nigeria,. Oyelakin, O. O.. Department of Science and Technology, University of The Gambia, Serrekunda, The Gambia. Professor Okonjo, K. O.. Chemistry ...

  13. Book of Abstracts

    International Nuclear Information System (INIS)

    2013-06-01

    ANIMMA 2013 is the third of a series of conferences devoted to endorsing and promoting scientific and technical activities based on nuclear instrumentation and measurements. The main objective of ANIMMA conference is to unite the various scientific communities not only involved in nuclear instrumentation and measurements, but also in nuclear medicine and radiation. The conference is all about getting scientists, engineers and the industry to meet, exchange cultures and identify new scientific and technical prospects to help overcome both current and future unresolved issues. The conference provides scientists and engineers with a veritable opportunity to compare their latest research and development in different areas: physics, nuclear energy, nuclear fuel cycle, safety, security, future energies (GEN III+, GENIV, ITER, ...). The conference topics include instrumentation and measurement methods for: Fundamental physics; Fusion diagnostics and technology; Nuclear power reactors; Research reactors; Nuclear fuel cycle; Decommissioning, dismantling and remote handling; Safeguards, homeland security; Severe accident monitoring; Environmental and medical sciences; Education, training and outreach. This document brings together the abstracts of the presentations. Each presentation (full paper) is analysed separately and entered in INIS

  14. Benchtop Technologies for Circulating Tumor Cells Separation Based on Biophysical Properties

    Directory of Open Access Journals (Sweden)

    Wan Shi Low

    2015-01-01

    Full Text Available Circulating tumor cells (CTCs are tumor cells that have detached from primary tumor site and are transported via the circulation system. The importance of CTCs as prognostic biomarker is leveraged when multiple studies found that patient with cutoff of 5 CTCs per 7.5 mL blood has poor survival rate. Despite its clinical relevance, the isolation and characterization of CTCs can be quite challenging due to their large morphological variability and the rare presence of CTCs within the blood. Numerous methods have been employed and discussed in the literature for CTCs separation. In this paper, we will focus on label free CTCs isolation methods, in which the biophysical and biomechanical properties of cells (e.g., size, deformability, and electricity are exploited for CTCs detection. To assess the present state of various isolation methods, key performance metrics such as capture efficiency, cell viability, and throughput will be reported. Finally, we discuss the challenges and future perspectives of CTC isolation technologies.

  15. A NOVEL SEPARATION TECHNOLOGY FOR NANO PARTICLES AT DISCHARGE OF COMBUSTION AND INCINERATION EQUIPMENT

    Directory of Open Access Journals (Sweden)

    Daniele Accornero

    2012-07-01

    Full Text Available Still today, the issue of safely and efficiently avoiding the atmospheric release of the nano-particles produced by combustion and incineration processes is a critical and open challenge. This study addresses the conception, the technological realization and the first experimental testing of a new device suitable for in-duct filtration and separation of nano particles dispersed into flue-gas streams. The active filtering material is a membrane made from ptfe foil, in origin impermeable but suitable to allow creation, once properly stretched, of an inner texture of permeable micro- and nano-tubes, thus inducing activation of van der Waals effects to the advantage of improved particles’ sticking. The experimental tests confirm attainment of a remarkable filtration capacity, way better than the so-called ‘absolute filters’. Moreover, the filtration material allows to undergo a simple and safe “regeneration cleaning”  process by which the particles can be re-collected off-duct without any filter dismantling.

  16. Costs of slurry separation technologies and alternative use of the solid fraction for biogas production or burning

    DEFF Research Database (Denmark)

    Jacobsen, Brian H.

    2011-01-01

    separation, in order to establish the overall costs. Key parameters are livestock density, transport distance, price of additional land and cost of separation. The conclusion is that unless land prices or prices on slurry agreements are very high, traditional handling of animal manure has the lowest costs......The purpose of this paper is to analyse different separation concepts in order to evaluate the overall costs based on a systems approach from stable to field. When livestock are produced in livestock intensive areas the distribution of manure without creating a surplus of nutrients is often...... for P-balance is stricter in Denmark than before, but developments in feeding, changes in regulation and the reduction of livestock numbers have made separation less favourable. This article compares dominant separation technologies in Denmark, such as decanter and flocculation, as well as source...

  17. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: STORMWATER SOURCE AREA TREATMENT DEVICE — BAYSAVER TECHNOLOGIES, INC. BAYSAVER SEPARATION SYSTEM, MODEL 10K

    Science.gov (United States)

    Verification testing of the BaySaver Separation System, Model 10K was conducted on a 10 acre drainage basin near downtown Griffin, Georgia. The system consists of two water tight pre-cast concrete manholes and a high-density polyethylene BaySaver Separator Unit. The BaySaver Mod...

  18. Evaluation of a new pulping technology for pre-treating source-separated organic household waste prior to anaerobic digestion

    DEFF Research Database (Denmark)

    Naroznova, Irina; Møller, Jacob; Larsen, Bjarne

    2016-01-01

    A new technology for pre-treating source-separated organic household waste prior to anaerobic digestion was assessed, and its performance was compared to existing alternative pre-treatment technologies. This pre-treatment technology is based on waste pulping with water, using a specially developed...... screw mechanism. The pre-treatment technology rejects more than 95% (wet weight) of non-biodegradable impurities in waste collected from households and generates biopulp ready for anaerobic digestion. Overall, 84-99% of biodegradable material (on a dry weight basis) in the waste was recovered......-pulping technology showed higher biodegradable material recovery, lower electricity consumption and comparable water consumption. The higher material recovery achieved with the technology was associated with greater transfer of nutrients (N and P), carbon (total and biogenic) but also heavy metals (except Pb...

  19. Advanced Membrane Separation Technologies for Energy Recovery from Industrial Process Streams

    Energy Technology Data Exchange (ETDEWEB)

    Keiser, J. R.; Wang, D. [Gas Technology Institute; Bischoff, B.; Ciora, [Media and Process Technology; Radhakrishnan, B.; Gorti, S. B.

    2013-01-14

    Recovery of energy from relatively low-temperature waste streams is a goal that has not been achieved on any large scale. Heat exchangers do not operate efficiently with low-temperature streams and thus require such large heat exchanger surface areas that they are not practical. Condensing economizers offer one option for heat recovery from such streams, but they have not been widely implemented by industry. A promising alternative to these heat exchangers and economizers is a prototype ceramic membrane system using transport membrane technology for separation of water vapor and recovery of heat. This system was successfully tested by the Gas Technology Institute (GTI) on a natural gas fired boiler where the flue gas is relatively clean and free of contaminants. However, since the tubes of the prototype system were constructed of aluminum oxide, the brittle nature of the tubes limited the robustness of the system and even limited the length of tubes that could be used. In order to improve the robustness of the membrane tubes and make the system more suitable for industrial applications, this project was initiated with the objective of developing a system with materials that would permit the system to function successfully on a larger scale and in contaminated and potentially corrosive industrial environments. This required identifying likely industrial environments and the hazards associated with those environments. Based on the hazardous components in these environments, candidate metallic materials were identified that are expected to have sufficient strength, thermal conductivity and corrosion resistance to permit production of longer tubes that could function in the industrial environments identified. Tests were conducted to determine the corrosion resistance of these candidate alloys, and the feasibility of forming these materials into porous substrates was assessed. Once the most promising metallic materials were identified, the ability to form an alumina

  20. Evaluation of a new pulping technology for pre-treating source-separated organic household waste prior to anaerobic digestion.

    Science.gov (United States)

    Naroznova, Irina; Møller, Jacob; Larsen, Bjarne; Scheutz, Charlotte

    2016-04-01

    A new technology for pre-treating source-separated organic household waste prior to anaerobic digestion was assessed, and its performance was compared to existing alternative pre-treatment technologies. This pre-treatment technology is based on waste pulping with water, using a specially developed screw mechanism. The pre-treatment technology rejects more than 95% (wet weight) of non-biodegradable impurities in waste collected from households and generates biopulp ready for anaerobic digestion. Overall, 84-99% of biodegradable material (on a dry weight basis) in the waste was recovered in the biopulp. The biochemical methane potential for the biopulp was 469 ± 7 mL CH4/g ash-free mass. Moreover, all Danish and European Union requirements regarding the content of hazardous substances in biomass intended for land application were fulfilled. Compared to other pre-treatment alternatives, the screw-pulping technology showed higher biodegradable material recovery, lower electricity consumption and comparable water consumption. The higher material recovery achieved with the technology was associated with greater transfer of nutrients (N and P), carbon (total and biogenic) but also heavy metals (except Pb) to the produced biomass. The data generated in this study could be used for the environmental assessment of the technology and thus help in selecting the best pre-treatment technology for source separated organic household waste. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Metacognition and abstract reasoning.

    Science.gov (United States)

    Markovits, Henry; Thompson, Valerie A; Brisson, Janie

    2015-05-01

    The nature of people's meta-representations of deductive reasoning is critical to understanding how people control their own reasoning processes. We conducted two studies to examine whether people have a metacognitive representation of abstract validity and whether familiarity alone acts as a separate metacognitive cue. In Study 1, participants were asked to make a series of (1) abstract conditional inferences, (2) concrete conditional inferences with premises having many potential alternative antecedents and thus specifically conducive to the production of responses consistent with conditional logic, or (3) concrete problems with premises having relatively few potential alternative antecedents. Participants gave confidence ratings after each inference. Results show that confidence ratings were positively correlated with logical performance on abstract problems and concrete problems with many potential alternatives, but not with concrete problems with content less conducive to normative responses. Confidence ratings were higher with few alternatives than for abstract content. Study 2 used a generation of contrary-to-fact alternatives task to improve levels of abstract logical performance. The resulting increase in logical performance was mirrored by increases in mean confidence ratings. Results provide evidence for a metacognitive representation based on logical validity, and show that familiarity acts as a separate metacognitive cue.

  2. Novel highly integrated biodiesel production technology in a centrifugal contactor separator device

    NARCIS (Netherlands)

    Kraai, G. N.; Schuur, B.; van Zwol, F.; van de Bovenkamp, H. H.; Heeres, H. J.

    2009-01-01

    The base catalyzed production of biodiesel (FAME) from sunflower oil and methanol in a continuous centrifugal contactor separator (CCS) with integrated reaction and phase separation was studied. The effect of catalyst loading (sodium methoxide), temperature, rotational frequency and flow rates of

  3. Composing Interfering Abstract Protocols

    Science.gov (United States)

    2016-04-01

    Tecnologia , Universidade Nova de Lisboa, Caparica, Portugal. This document is a companion technical report of the paper, “Composing Interfering Abstract...a Ciência e Tecnologia (Portuguese Foundation for Science and Technology) through the Carnegie Mellon Portugal Program under grant SFRH / BD / 33765

  4. Higher-Order Blind Signal Feature Separation: An Enabling Technology for Battlefield Awareness

    National Research Council Canada - National Science Library

    Su, Wei; Kosinski, John A

    2006-01-01

    Higher-order transform blind signal feature classification is discussed for separating bar-shaped, circular, squared, circular-squared, and offset-diamonded constellation patterns of digital linear signals...

  5. Effect of different technologies and animal manures on solid-liquid separation efficiencies

    Directory of Open Access Journals (Sweden)

    Giorgia Cocolo

    2012-09-01

    Full Text Available Solid-liquid separation is a widely used manure treatment option. However, little information is available to predict separator performance in a specific operating condition. This study investigates the effect on the separation efficiency of animal species (cattle and swine, use of flocculants, and separator construction and operating characteristics (filtration, pressurised filtration, settling and centrifugation. Using data available from published experiments, we evaluated correlations of the separation efficiencies with the physical and chemical characteristics of the inlet slurries (dry matter, total nitrogen, ammoniacal nitrogen, phosphorus and potassium. Dry matter concentration of the input manure was found to be the best parameter used to calculate and validate regression equations. Regres sions for the operating conditions of 7 of the 14 subgroups evaluated were significant (P<0.05 for at least one parameter. Pressurised filtration seems to be the process best represented by these regressions that can predict dry matter and nitrogen efficiency with relative root mean squared errors of less than 50%. However, they could only be used for some of the parameters and separation techniques. Therefore, it was not possible to use the available experimental data to define and validate empirical predictive models for all the conditions. Specific studies are needed to define more precise and physically-based models.

  6. Preparation of a technology development roadmap for the Accelerator Transmutation of Waste (ATW) System : report of the ATW separations technologies and waste forms technical working group.

    Energy Technology Data Exchange (ETDEWEB)

    Collins, E.; Duguid, J.; Henry, R.; Karell, E.; Laidler, J.; McDeavitt, S.; Thompson, M.; Toth, M.; Williamson, M.; Willit, J.

    1999-08-12

    In response to a Congressional mandate to prepare a roadmap for the development of Accelerator Transmutation of Waste (ATW) technology, a Technical Working Group comprised of members from various DOE laboratories was convened in March 1999 for the purpose of preparing that part of the technology development roadmap dealing with the separation of certain radionuclides for transmutation and the disposal of residual radioactive wastes from these partitioning operations. The Technical Working Group for ATW Separations Technologies and Waste Forms completed its work in June 1999, having carefully considered the technology options available. A baseline process flowsheet and backup process were identified for initial emphasis in a future research, development and demonstration program. The baseline process combines aqueous and pyrochemical processes to permit the efficient separation of the uranium, technetium, iodine and transuranic elements from the light water reactor (LWR) fuel in the head-end step. The backup process is an all- pyrochemical system. In conjunction with the aqueous process, the baseline flowsheet includes a pyrochemical process to prepare the transuranic material for fabrication of the ATW fuel assemblies. For the internal ATW fuel cycle the baseline process specifies another pyrochemical process to extract the transuranic elements, Tc and 1 from the ATW fuel. Fission products not separated for transmutation and trace amounts of actinide elements would be directed to two high-level waste forms, one a zirconium-based alloy and the other a glass/sodalite composite. Baseline cost and schedule estimates are provided for a RD&D program that would provide a full-scale demonstration of the complete separations and waste production flowsheet within 20 years.

  7. Advanced Acid Gas Separation Technology for Clean Power and Syngas Applications

    Energy Technology Data Exchange (ETDEWEB)

    Amy, Fabrice [Air Products and Chemicals Inc., Allentown, PA (United States); Hufton, Jeffrey [Air Products and Chemicals Inc., Allentown, PA (United States); Bhadra, Shubhra [Air Products and Chemicals Inc., Allentown, PA (United States); Weist, Edward [Air Products and Chemicals Inc., Allentown, PA (United States); Lau, Garret [Air Products and Chemicals Inc., Allentown, PA (United States); Jonas, Gordon [Air Products and Chemicals Inc., Allentown, PA (United States)

    2015-06-30

    Air Products has developed an acid gas removal technology based on adsorption (Sour PSA) that favorably compares with incumbent AGR technologies. During this DOE-sponsored study, Air Products has been able to increase the Sour PSA technology readiness level by successfully operating a two-bed test system on coal-derived sour syngas at the NCCC, validating the lifetime and performance of the adsorbent material. Both proprietary simulation and data obtained during the testing at NCCC were used to further refine the estimate of the performance of the Sour PSA technology when expanded to a commercial scale. In-house experiments on sweet syngas combined with simulation work allowed Air Products to develop new PSA cycles that allowed for further reduction in capital expenditure. Finally our techno economic analysis of the use the Sour PSA technology for both IGCC and coal-to-methanol applications suggests significant improvement of the unit cost of electricity and methanol compared to incumbent AGR technologies.

  8. SERS internship fall 1995 abstracts and research papers

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Beverly

    1996-05-01

    This report is a compilation of twenty abstracts and their corresponding full papers of research projects done under the US Department of Energy Science and Engineering Research Semester (SERS) program. Papers cover a broad range of topics, for example, environmental transport, supercomputers, databases, biology. Selected papers were indexed separately for inclusion the the Energy Science and Technology Database.

  9. Recent advances in yeast molecular biology: recombinant DNA. [Lead abstract

    Energy Technology Data Exchange (ETDEWEB)

    1982-09-01

    Separate abstracts were prepared for the 25 papers presented at a workshop focusing on chromosomal structure, gene regulation, recombination, DNA repair, and cell type control, that have been obtained by experimental approaches incorporating the new technologies of yeast DNA transformation, molecular cloning, and DNA sequence analysis. (KRM)

  10. Life Cycle Assessment of pretreatment technologies for anaerobic digestion of source-separated organic household waste

    DEFF Research Database (Denmark)

    Naroznova, Irina; Møller, Jacob; Scheutz, Charlotte

    2013-01-01

    traditional pretreatment method using a screw press. The inventory of the technologies was constructed including the mass balance, amount of biogas produced, nutrient recovery rates, and produced biomass quality. The technologies were modelled in the LCA-model EASETECH and the potential environmental impacts...

  11. Review and assessment of technologies for the separation of strontium from alkaline and acidic media

    Energy Technology Data Exchange (ETDEWEB)

    Orth, R.J.; Kurath, D.E.

    1994-01-01

    A literature survey has been conducted to identify and evaluate methods for the separation of strontium from acidic and alkaline media as applied to Hanford tank waste. The most promising methods of solvent extraction, precipitation, and ion exchange are described. The following criteria were used for evaluating the separation methods: Appreciable strontium removal must be demonstrated; Strontium selectivity over bulk components must be demonstrated; The method must show promise for evolving into a practical and fairly simple process; The process should be safe to operate; The method must be robust (i.e., capable of separating strontium from various waste types); Secondary waste generation must be minimized; and The method must show resistance to radiation damage. The methods discussed did not necessarily satisfy all of the above criteria; thus, key areas requiring further development are also given for each method. Less promising solvent extraction, precipitation, and ion exchange methods were also identified; areas for potential development are included in this report.

  12. Numerical Study of Water Control with Downhole Oil-Water Separation Technology

    Directory of Open Access Journals (Sweden)

    Yin Khor Yin

    2014-07-01

    Full Text Available The maturing oil fields with increasing water production can pose a challenging produced water handling and disposal issues. This paper presents a numerical study of a motorless hydrocyclone to enhance understanding of the downhole oil-water separation. The turbulence of fluid flow is obtained using K-ε Realizable Turbulence model for complex swirl dominated flow, while the interface between hydrocarbon and water is described using the Discrete Phase model. In this approach, factors which contribute to the hydrocyclone separation instability were discussed. Discussion is then extended to the relationship of residence time with pressure difference between overflow and underflow. These pressure differences are able to relate to pressure condition for high water cut well which require downhole separation.

  13. Technology assessment and impact analysis of separation methods applied to radioactive waste management

    International Nuclear Information System (INIS)

    Goldstein, M.; Gangwer, T.; Braun, C.; Lester, R.

    1977-03-01

    A computer program has been written to estimate actinide production and accumulation in the high-level waste generated by an expanding nuclear economy over a 100-year period. The total weight of the actinides remaining in the biosphere was estimated for the recycle transmutation option and for two no-recycle options. A novel photochemical method for separating actinides from high-level waste or from each other is described based on selective ligand exchange reactions. A preliminary cost comparison of plutonium separation using standard photoredox techniques has been accomplished and is reported. The energy requirements for photochemically separating all of the actinides are estimated to be only a fraction of the energy supplied by the fuel. The potential advantages and disadvantages of actinide partitioning as a waste management option are discussed. Conclusions and recommendations are made regarding both the direction of technical development and policy analysis

  14. Improving Separation Performance and Detection Capabilities in Liquid Chromatography Using Active Flow Technology: A Review

    NARCIS (Netherlands)

    Camenzuli, M.; Shalliker, R.A.

    2015-01-01

    The development of sub-2-mu m particles, core shell particles, and monolithic columns has improved separation performance in liquid chromatography (LC) over the past 20 years. However, a key limitation that still prevents LC columns from reaching their full potential is the heterogeneity in the flow

  15. Environmental friendly crush-magnetic separation technology for recycling metal-plated plastics from end-of-life vehicles.

    Science.gov (United States)

    Xue, Mianqiang; Li, Jia; Xu, Zhenming

    2012-03-06

    Metal-plated plastics (MPP), which are important from the standpoint of aesthetics or even performance, are increasingly employed in a wide variety of situations in the automotive industry. Serious environmental problems will be caused if they are not treated appropriately. Therefore, recycling of MPP is an important subject not only for resource recycling but also for environmental protection. This work represents a novel attempt to deal with the MPP. A self-designed hammer crusher was used to liberate coatings from the plastic substrate. The size distribution of particles was analyzed and described by the Rosin-Rammler function model. The optimum retaining time of materials in the crusher is 3 min. By this time, the liberation rate of the materials can reach 87.3%. When the density of the suspension is 31,250 g/m(3), the performance of liberation is the best. Two-step magnetic separation was adopted to avoid excessive crushing and to guarantee the quality of products. Concerning both the separation efficiency and grade of products, the optimum rotational speed of the magnetic separator is 50-70 rpm. On the basis of the above studies about the liberating and separating behavior of the materials, a continuous recycling system (the technology of crush-magnetic separation) is developed. This recycling system provides a feasible method for recycling MPP efficiently, economically, and environmentally.

  16. Low-temperature technology for the separation of krypton in reprocessing plants under nuclear conditions

    International Nuclear Information System (INIS)

    Gutowski, H.; Schroeder, E.

    1979-01-01

    The present status of the design work aiming at an Installation for the Purification of Dissolver Off-gas (AZUR) is outlined. The technological measures taken to cope with the problems resulting from the specific nuclear conditions are described in detail. The demonstration of a high availability of this technology in hot operation will be an important step towards the realisation of a fuel reprocessing plant. (orig.) [de

  17. High-efficiency technology for lithium isotope separation using an ionic-liquid impregnated organic membrane

    International Nuclear Information System (INIS)

    Hoshino, Tsuyoshi; Terai, Takayuki

    2011-01-01

    The tritium needed as a fuel for fusion reactors is produced by the neutron capture reaction of lithium-6 ( 6 Li) in tritium breeding materials. New lithium isotope separation technique using ionic-liquid impregnated organic membranes (Ionic-Liquid-i-OMs) have been developed. Lithium ions are able to move by electrodialysis through certain Ionic-Liquid-i-OMs between the cathode and the anode in lithium solutions. In this report, the effects of protection cover and membrane thickness on the durability of membrane and the efficiency of isotope separation were evaluated. In order to improve the durability of the Ionic-Liquid-i-OM, we developed highly-durable Ionic-Liquid-i-OM. Both surfaces of the Ionic-Liquid-i-OM were covered by a nafion 324 overcoat or a cation exchange membrane (SELEMION TM CMD) to prevent the outflow of the ionic liquid. It was observed that the durability of the Ionic-Liquid-i-OM was improved by a nafion 324 overcoat. On the other hand, the organic membrane selected was 1, 2 or 3 mm highly-porous Teflon film, in order to efficiently impregnate the ionic liquid. The 6 Li isotope separation factor by electrodialysis using highly-porous Teflon film of 3 mm thickness was larger than using that of 1 or 2 mm thickness.

  18. Proceedings of the international conference on emerging frontiers and challenges in radiation biology: abstracts

    International Nuclear Information System (INIS)

    Purohit, R.K.; Chakrawarti, Aruna; Agarwal, Manisha; Arora, Anil

    2012-01-01

    This abstract volume includes abstracts related to six technical sessions of the conference viz., Radiation induced genomic instability and bystander effects, Radiation dosimetry and dose limits, Radiation protection and nuclear technology application, Molecular diagnosis and targeted therapy for cancer, cancer care and chemoradiotherapy, health hazards of radiation and protection. Papers relevant to INIS are indexed separately

  19. DEGRO 2017. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2017-06-15

    The volume includes abstracts of the Annual DEGRO Meeting 2017 covering lectures and poster sessions with the following issues: lymphoma, biology, physics, radioimmunotherapy, sarcomas and rare tumors, prostate carcinoma, lung tumors, benign lesions and new media, mamma carcinoma, gastrointestinal tumors, quality of life, care science and quality assurance, high-technology methods and palliative situation, head-and-neck tumors, brain tumors, central nervous system metastases, guidelines, radiation sensitivity, radiotherapy, radioimmunotherapy.

  20. The Investigation of Separability of Particles Smaller Than 5mm by Eddy-Current Separation Technology - Part II : Novel Design Concepts

    NARCIS (Netherlands)

    Rem, P.C.; Zhang, S.; Forssberg, E.; De Jong, T.P.R.

    2000-01-01

    Separability and separation mechanisms of small particles in modern rotating type eddycurrent separators (ECSs) were discussed in Part I. In order to address problems associated with this design concept, a number of novel ECSs, each with a unique design, have been developed. Part II reports on

  1. BARC golden jubilee and DAE-BRNS life sciences symposium 2006 on trends in research and technologies in agriculture and food sciences: abstracts

    International Nuclear Information System (INIS)

    2006-01-01

    Better methods of agricultural production, availability of hybrid and mutant varieties of crop plants, irrigation, fertilizers and pesticides have all helped boost up agricultural production, and famines and droughts remain restricted to a few pockets in the world. Innovative approach to step up agricultural production, especially of food crops symbolize synergy and synthesis of conventional and mutation breeding aided by modern biotechnological tools like DNA markers and gene manipulation in tune with the policy of environmental and soil conservation. It has increased the production of oil seeds in India during the last decade with a shift from groundnut and mustard to soybean and sunflower. Bhabha Atomic Research Centre (BARC), Mumbai which has strongly pursued the important societal programmes using nuclear technology in agriculture and health, has made a very significant impact on the country's agriculture by developing 27 new crop varieties mostly of oil seeds and pulses. Further, radiation processing of food, pioneered in India by BARC, is now gaining global acceptance and has opened new vistas for agriculture exports. The present symposium is dedicated to trends in research of technologies in agriculture and food sciences. The papers relevant to INIS are indexed separately

  2. A reflection on the relationship between technology and teacher education : synergy or separate entities?

    NARCIS (Netherlands)

    Collis, Betty

    1994-01-01

    The basis of this paper is the observation, supported by various international surveys and discussions, that much of the 'education' teachers receive concerning the applications of computer-related technology has occurred not only apart from a direct relationship to research about information

  3. Eco-sewerage System Design for Modern Office Buildings: based on Vacuum and Source-separation Technology

    Science.gov (United States)

    Xu, Kangning; Wang, Chengwen; Zheng, Min; Yuan, Xin

    2010-11-01

    This study aimed to construct an on-site eco-sewerage system for modern office buildings in urban area based on combined innovative technologies of vacuum and source-separation. Results showed that source-separated grey water had low concentrations of pollutants, which helped the reuse of grey water. However, the system had a low separation efficiency between the yellow water and the brown water, which was caused by the plug problem in the urine collection from the urine-diverting toilets. During the storage of yellow water for liquid fertilizer production, nearly all urea nitrogen transferred to ammonium nitrogen and about 2/3 phosphorus was lost because of the struvite precipitation. Total bacteria and coliforms increased first in the storage, but then decreased to low concentrations. The anaerobic/anoxic/aerobic MBR had high elimination rates of COD, ammonium nitrogen and total nitrogen of the brown water, which were 94.2%, 98.1% and 95.1%, respectively. However, the effluent still had high contents of colority, nitrate and phosphorus, which affected the application of the effluent for flushing water. Even though, the effluent might be used as dilution water for the yellow water fertilizer. Based on the results and the assumption of an ideal operation of the vacuum source-separation system, a future plan for on-site eco-sewerage system of modern office buildings was constructed. Its sustainability was validated by the analysis of the substances flow of water and nutrients.

  4. Investigation on an innovative technology for wet separation of plastic wastes.

    Science.gov (United States)

    Lupo, Emanuela; Moroni, Monica; La Marca, Floriana; Fulco, Simone; Pinzi, Valentina

    2016-05-01

    This paper presents an original device for the separation of plastic polymers from mixtures. Due to the combination of a characteristic flow pattern developing within the apparatus and density, shape and size differences among two or more polymers, this device allows their separation into two products, one collected within the instrument and the other one expelled through its outlet ducts. Experimental tests have been conducted to investigate the effectiveness of the apparatus, using two geometric arrangements, nine hydraulic configurations and three selections of polymers at three stages of a material life cycle. Tests with samples composed of a single typology of polymer have been used to understand the interaction between the particles and the carrying fluid within the apparatus in different hydraulic configurations and geometric arrangements. Multi-material tests are essential to simulate the real conditions in an industrial recycling plant. The separation results have been evaluated in terms of grade and recovery of a useful material. Under the proper hydraulic configurations, the experimentation showed that it is possible to produce an almost pure concentrate of Polyethylene Terephthalate (PET) from a mixture of 85% PET and 15% Polycarbonate (PC) (concentrate grade and recovery equal to 99.5% and 95.1%) and a mixture of 85% PET and 15% Polyvinyl Chloride (PVC) (concentrate grade and recovery equal to 97.9% and 100.0%). It is further demonstrated that almost pure concentrates of PVC and PC can be produced from a mixture of 85% PVC and 15% PC (PVC grade and recovery equal to 99.9% and 99.7%) and a mixture of 85% PC and 15% PVC (PC grade and recovery equal to 99.0% and 99.5%). Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. A new technology for separation and recovery of materials from waste printed circuit boards by dissolving bromine epoxy resins using ionic liquid

    International Nuclear Information System (INIS)

    Zhu, P.; Chen, Y.; Wang, L.Y.; Qian, G.Y.; Zhou, M.; Zhou, J.

    2012-01-01

    Highlights: ► WPCBs were heated in [EMIM + ][BF 4 − ] for recovering solider at 240 °C. ► The bromine epoxy resins in WPCBs were all dissolved in [EMIM + ][BF 4 − ] at 260 °C. ► Used [EMIM + ][BF 4 − ] is treated by water to obtain regeneration. - Abstract: Recovery of valuable materials from waste printed circuit boards (WPCBs) is quite difficult because WPCBs is a heterogeneous mixture of polymer materials, glass fibers, and metals. In this study, WPCBs was treated using ionic liquid (1-ethyl-3-methylimizadolium tetrafluoroborate [EMIM + ][BF 4 − ]). Experimental results showed that the separation of the solders went to completion, and electronic components (ECs) were removed in WPCBs when [EMIM + ][BF 4 − ] solution containing WPCBs was heated to 240 °C. Meanwhile, metallographic observations verified that the WPCBs had an initial delamination. When the temperature increased to 260 °C, the separation of the WPCBs went to completion, and coppers and glass fibers were obtained. The used [EMIM + ][BF 4 − ] was treated by water to generate a solid–liquid suspension, which was separated completely to obtain solid residues by filtration. Thermal analyses combined with infrared ray spectra (IR) observed that the solid residues were bromine epoxy resins. NMR (nuclear magnetic resonance) showed that hydrogen bond played an important role for [EMIM + ][BF 4 − ] dissolving bromine epoxy resins. This clean and non-polluting technology offers a new way to recycle valuable materials from WPCBs and prevent environmental pollution from WPCBs effectively.

  6. Novel electrode structures for large scale dielectrophoretic separations based on textile technology.

    Science.gov (United States)

    Abidin, Zurina Z; Downes, Les; Markx, Gerard H

    2007-06-15

    The use of dielectrophoresis (DEP) to date has mainly been limited to processing small volumes due to difficulties in the fabrication of microelectrodes over large surface areas. To overcome this problem a novel approach to the construction of micro-electrode arrays has been developed based on weaving. A plain weave cloth was made from 100 microm diameter stainless steel wires and 75 decitex polyester yarns. The stainless steel wires formed the weft, and were kept parallel and apart by a warp of flexible polyester yarns, with a gap of around 150 microm between the metal wires. The metal wires were alternately connected to earth and signal of an AC power source, and it was shown that it was possible to collect yeast cells suspended in deionised water at the metal wire surfaces by dielectrophoresis. The polyester yarn was also found to distort the electric field, creating further areas of electric field non-uniformity around the polyester yarns, further enhancing the capability of the system to attract cells. A 14 ml separation chamber was built from the cloth by alternately sandwiching perspex slabs and cloth together. The DEP chamber was able to effectively collect life yeast from a flow of suspended cells through the cloth using an applied field of 1 MHz at flow rates up to 5 ml min-1. However, some loss occurred due to sedimentation. Also, the chamber was able to separate dead and live yeast cells at 30 Vpk-pk, 2 MHz, with some cell loss due to sedimentation.

  7. Aluminum Oxide Nanoparticles for Highly Efficient Asphaltene Separation from Crude Oil Using Ceramic Membrane Technology

    Directory of Open Access Journals (Sweden)

    Rezakazemi Mashallah

    2017-11-01

    Full Text Available The effects of aluminum oxide nanoparticles on the removal of asphaltenes from an Iranian crude oil (Soroush using a ceramic membrane with pore size of 0.2 µm were investigated. In order to achieve superior asphaltene separation by ultrafiltration, it is essential to make some changes for destabilizing asphaltene in crude oil. The asphaltene destabilization was done using crude oil contact with an acid containing dissolved metal ions. Metal oxide nanoparticles adsorbed asphaltene molecules and increased their molecular size. The nanoparticle of aluminum oxide was applied to alter precipitation and peptization properties of asphaltenes. Dynamic Light Scattering (DLS was used to measurement of the asphaltene molecular size dissolved in toluene. Raman spectroscopy and the Tuinstra equation were used to determine the aromatic sheet diameter (La via the integrated intensities of the G and D1 modes. This revealed that the asphaltene particles react with nano aluminum oxide and the average molecular size of asphaltene was raised from 512.754 to 2949.557 nm and La from 5.482 to 13.787. The obtained results showed that using nano aluminum oxides, asphaltene separation increased from 60–85 wt% to 90–97 wt% based on the asphaltene content of crude oil.

  8. Parameterized Dataflow (Extended Abstract

    Directory of Open Access Journals (Sweden)

    Dominic Duggan

    2016-10-01

    Full Text Available Dataflow networks have application in various forms of stream processing, for example for parallel processing of multimedia data. The description of dataflow graphs, including their firing behavior, is typically non-compositional and not amenable to separate compilation. This article considers a dataflow language with a type and effect system that captures the firing behavior of actors. This system allows definitions to abstract over actor firing rates, supporting the definition and safe composition of actor definitions where firing rates are not instantiated until a dataflow graph is launched.

  9. Development of Pyro-separation Technology Based on Molten Salt Electrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Shim, Joon Bo; Kim, E. H.; Yoo, J. H. (and others)

    2007-06-15

    The focus of this study was to develop recovery technologies in the pyroprocessing. The unit processes of the project can be classified into two groups; electro-refining process to recover uranium and long-lived nuclides, and cathode processing to produce a metal ingot both from a salt-contained metal and from Cd-contained metal. This project has been carried out for the third phase period of the long-term nuclear R and D program, and focused on the development of key technologies of the pyroprocessing such as electrorefining, draw down and cathode processing. Mock-up system of 1 kg-U/batch was built for performance tests which were conducted to ensure the adequacy of the research and development of the pyroprocessing technology. The experiments were carried out through bench-scale inactive tests except for uranium. In particular, the sticking problem was inevitable in the US's Mark-V and PEER electrorefiner. As a result of this study, a graphite cathode was developed, which exhibited self-scraping behavior and did not need scraping step. The design of an electrorefiner could be simplified, and the throughput was enhanced due to an increased cathode area. A long-term R and D plan was established to develop pyroprocessing technology. In the near term, the results of the current project will be utilized in the next phase of the R and D plan ('07 - '10), and long-term wise, is expected to contribute to recovering fuel materials for transmutation in a Gen-IV reactor.

  10. 13th Radiochemical Conference. Booklet of Abstracts

    International Nuclear Information System (INIS)

    1998-04-01

    The Conference included the following sessions: (i) Opening plenary presentations (6 contributions); (ii) Chemistry of natural radionuclides, discovery of radium and polonium (6 verbal presentations + 5 poster presentations); (iii) Radionuclides in the environment, radioecology (29 + 48); (iv) Activation analysis and other radioanalytical methods (36 + 49); (v) Ionizing radiation in science and technology (12 + 12); (vi) Chemistry of actinide and trans-actinide elements (11 + 14); (vii) Separation methods, speciation (18 + 41); (viii) Production and application of radionuclides (14 + 29); and (ix) Radiochemical problems in nuclear waste management (12 + 22). The majority of verbal presentations has been input to INIS, mostly in the form of the full authors' abstracts. (P.A.)

  11. Division of Environmental Control Technology program, 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-01

    Environmental engineering programs are reviewed for the following technologies; coal; petroleum and gas; oil shale; solar; geothermal and energy conservation; nuclear energy; and decontamination and decommissioning. Separate abstracts were prepared for each technology. (MHR)

  12. ICENES 2007 Abstracts

    International Nuclear Information System (INIS)

    Sahin, S.

    2007-01-01

    In this book Conference Program and Abstracts were included 13th International Conference on Emerging Nuclear Energy Systems which held between 03-08 June 2007 in Istanbul, Turkey. The main objective of International Conference series on Emerging Nuclear Energy Systems (ICENES) is to provide an international scientific and technical forum for scientists, engineers, industry leaders, policy makers, decision makers and young professionals who will shape future energy supply and technology , for a broad review and discussion of various advanced, innovative and non-conventional nuclear energy production systems. The main topics of 159 accepted papers from 35 countries are fusion science and technology, fission reactors, accelerator driven systems, transmutation, laser in nuclear technology, radiation shielding, nuclear reactions, hydrogen energy, solar energy, low energy physics and societal issues

  13. Abstracts and Abstracting in Knowledge Discovery.

    Science.gov (United States)

    Pinto, Maria; Lancaster, F. W.

    1999-01-01

    Presents various levels of criteria for judging the quality of abstracts and abstracting. Requirements for abstracts to be read by humans are compared with requirements for those to be searched by computer. Concludes that the wide availability of complete text in electronic form does not reduce the value of abstracts for information retrieval.…

  14. Remediation of water pollution caused by pharmaceutical residues based on electrochemical separation and degradation technologies: a review.

    Science.gov (United States)

    Sirés, Ignasi; Brillas, Enric

    2012-04-01

    In the last years, the decontamination and disinfection of waters by means of direct or integrated electrochemical processes are being considered as a very appealing alternative due to the significant improvement of the electrode materials and the coupling with low-cost renewable energy sources. Many electrochemical technologies are currently available for the remediation of waters contaminated by refractory organic pollutants such as pharmaceutical micropollutants, whose presence in the environment has become a matter of major concern. Recent reviews have focused on the removal of pharmaceutical residues upon the application of other important methods like ozonation and advanced oxidation processes. Here, we present an overview on the electrochemical methods devised for the treatment of pharmaceutical residues from both, synthetic solutions and real pharmaceutical wastewaters. Electrochemical separation technologies such as membrane technologies, electrocoagulation and internal micro-electrolysis, which only isolate the pollutants from water, are firstly introduced. The fundamentals and experimental set-ups involved in technologies that allow the degradation of pharmaceuticals, like anodic oxidation, electro-oxidation with active chlorine, electro-Fenton, photoelectro-Fenton and photoelectrocatalysis among others, are further discussed. Progress on the promising solar photoelectro-Fenton process devised and further developed in our laboratory is especially highlighted and documented. The abatement of total organic carbon or reduction of chemical oxygen demand from contaminated waters allows the comparison between the different methods and materials. The routes for the degradation of the some pharmaceuticals are also presented. Copyright © 2011 Elsevier Ltd. All rights reserved.

  15. Query-by-Example Music Information Retrieval by Score-Informed Source Separation and Remixing Technologies

    Directory of Open Access Journals (Sweden)

    Goto Masataka

    2010-01-01

    Full Text Available We describe a novel query-by-example (QBE approach in music information retrieval that allows a user to customize query examples by directly modifying the volume of different instrument parts. The underlying hypothesis of this approach is that the musical mood of retrieved results changes in relation to the volume balance of different instruments. On the basis of this hypothesis, we aim to clarify the relationship between the change in the volume balance of a query and the genre of the retrieved pieces, called genre classification shift. Such an understanding would allow us to instruct users in how to generate alternative queries without finding other appropriate pieces. Our QBE system first separates all instrument parts from the audio signal of a piece with the help of its musical score, and then it allows users remix these parts to change the acoustic features that represent the musical mood of the piece. Experimental results showed that the genre classification shift was actually caused by the volume change in the vocal, guitar, and drum parts.

  16. Technology of oxygen production in the membranecryogenic air separation system for a 600 MW oxy-type pulverized bed boiler

    Science.gov (United States)

    Berdowska, Sylwia; Skorek-Osikowska, Anna

    2012-09-01

    In this paper the results of the thermodynamic analysis of the oxy-combustion type pulverized bed boiler integrated with a hybrid, membrane- cryogenic oxygen separation installation are presented. For the calculations a 600 MW boiler with live steam parameters at 31.1 MPa /654.9 oC and reheated steam at 6.15 MPa/672.4 oC was chosen. In this paper the hybrid membrane-cryogenic technology as oxygen production unit for pulverized bed boiler was proposed. Such an installation consists of a membrane module and two cryogenic distillation columns. Models of these installations were built in the Aspen software. The energy intensity of the oxygen production process in the hybrid system was compared with the cryogenic technology. The analysis of the influence of membrane surface area on the energy intensity of the process of air separation as well as the influence of oxygen concentration at the inlet to the cryogenic installation on the energy intensity of a hybrid unit was performed.

  17. Research on distributed strain separation technology of fiber Brillouin sensing system combining an electric power optical fiber cable

    Science.gov (United States)

    Lei, Yuqing; Chen, Xi; Li, Jihui; Tong, Jie

    2013-12-01

    Brillouin-based optical fiber sensing system has been taken more and more attentions in power transmission line in recent years. However, there exists a temperature cross sensitivity problem in sensing system. Hence, researching on strain separation technology of fiber brillouin sensing system is an urgent requirement in its practical area. In this paper, a real-time online distributed strain separation calculation technology of fiber Brillouin sensing combining an electric power optical fiber cable is proposed. The technology is mainly composed of the Brillouin temperature-strain distributed measurement system and the Raman temperature distributed measurement system. In this technology, the electric power optical fiber cable is a special optical phase conductor (OPPC); the Brillouin sensing system uses the Brillouin optical time domain analysis (BOTDA) method. The optical unit of the OPPC includes single-mode and multimode fibers which can be used as sensing channel for Brillouin sensing system and Raman sensing system respectively. In the system networking aspect, the data processor of fiber Brillouin sensing system works as the host processor and the data processor of fiber Raman sensing system works as the auxiliary processor. And the auxiliary processor transfers the data to the host processor via the Ethernet interface. In the experiment, the BOTDA monitoring system and the Raman monitoring system work on the same optical unit of the OPPC simultaneously; In the data processing aspect, the auxiliary processor of Raman transfers the temperature data to the host processor of Brillouin via the Ethernet interface, and then the host processor of Brillouin uses the temperature data combining itself strain-temperature data to achieve the high sampling rate and high-precision strain separation via data decoupling calculation. The data decoupling calculation is achieved through the interpolation, filtering, feature point alignment, and the singular point prediction

  18. Advanced separation technology for flue gas cleanup. Final report, February 1998

    Energy Technology Data Exchange (ETDEWEB)

    Bhown, A.S.; Alvarado, D.; Pakala, N.; Tagg, T.; Riggs, T.; Ventura, S.; Sirkar, K.K.; Majumdar, S.; Bhaumick, D.

    1998-06-01

    The objective of this work by SRI International was to develop a novel system for regenerable SO{sub 2} and NO{sub x} scrubbing of flue gas that focuses on (1) a novel method for regenerating spent SO{sub 2} scrubbing liquor and (2) novel chemistry for reversible absorption of NO{sub x}. High efficiency, hollow fiber contactors (HFCs) were proposed as the devices for scrubbing the SO{sub 2} and NO{sub x} from the flue gas. The system would be designed to remove more than 95% of the SO{sub 2} and more than 75% of the NO{sub x} from flue gases typical of pulverized coal-fired power plants at a cost that is at least 20% less than combined wet limestone scrubbing of SO{sub x} and selective catalytic reduction of NO{sub x}. In addition, the process would generate only marketable by-products, if any (no waste streams are anticipated). The major cost item in existing technology is capital investment. Therefore, the approach was to reduce the capital cost by using high-efficiency, hollow fiber devices for absorbing and desorbing the SO{sub 2} and NO{sub x}. The authors also introduced new process chemistry to minimize traditionally well-known problems with SO{sub 2} and NO{sub x} absorption and desorption. The process and progress in its development are described.

  19. Sustainable Solution for Crude Oil and Natural Gas Separation using Concentrated Solar Power Technology

    Science.gov (United States)

    Choudhary, Piyush; Srivastava, Rakesh K.; Nath Mahendra, Som; Motahhir, Saad

    2017-08-01

    In today’s scenario to combat with climate change effects, there are a lot of reasons why we all should use renewable energy sources instead of fossil fuels. Solar energy is one of the best options based on features like good for the environment, independent of electricity prices, underutilized land, grid security, sustainable growth, etc. This concept paper is oriented primarily focused on the use of Solar Energy for the crude oil heating purpose besides other many prospective industrial applications to reduce cost, carbon footprint and moving towards a sustainable and ecologically friendly Oil & Gas Industry. Concentrated Solar Power technology based prototype system is proposed to substitute the presently used system based on natural gas burning method. The hybrid system which utilizes the solar energy in the oil and gas industry would strengthen the overall field working conditions, safety measures and environmental ecology. 40% reduction on natural gas with this hybrid system is estimated. A positive implication for an environment, working conditions and safety precautions is the additive advantage. There could also decrease air venting of CO2, CH4 and N2O by an average of 30-35%.

  20. Improvement of auditing technology of safety analysis through thermal-hydraulic separate effect tests

    Energy Technology Data Exchange (ETDEWEB)

    No, Hee Cheon; Park, Hyun Sik; Kim, Hyoung Tae; Moon, Young Min; Choi, Sung Won; Hwang, Do Hyun [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    2000-03-15

    The direct-contact condensation hear transfer coefficients are experimentally obtained in the following conditions : pure steam/steam in the presence of noncondensible gas, horizontal/slightly inclined pipe, cocurrent/countercurrent stratified flow with water. The empirical correlation for liquid Nusselt number is developed in conditions of the slightly inclined pipe and the cocurrent stratified flow. The several models - the wall friction coefficient, the interfacial friction coefficient, the correlation of direct-contact condensation with noncondensible gases, and the correlation of wall film condensation - in the RELAP5/MOD3.2 code are modified, As results, RELAP5/MOD3.2 is improved. The present experimental data is used for evaluating the improved code. The standard RELAP5/MOD3.2 code is modified using the non-iterative modeling, which is a mechanistic model and does not require any interfacial information such as the interfacial temperature, The modified RELAP5/MOD3.2 code os used to simulate the horizontally stratified in-tube condensation experiment which represents the direct-contact condensation phenomena in a hot leg of a nuclear reactor. The modeling capabilities of the modified code as well as the standard code are assessed using several hot-leg condensation experiments. The modified code gives better prediction over local experimental data of liquid void fraction and interfacial heat transfer coefficient than the standard code. For the separate effect test of the thermal-hydraulic phenomena in the pressurizer, the scaling analysis is performed to obtain a similarity of the phenomena between the Korea Standard Nuclear Power Plant(KSNPP) and the present experimental facility. The diameters and lengths of the hot-leg, the surge line and the pressurizer are scaled down with the similitude of CCFL and velocity. The ratio of gas flow rate is 1/25. The experimental facility is composed of the air-water supply tank, the horizontal pipe, the surge line and the

  1. CO2 CAPTURE PROJECT - AN INTEGRATED, COLLABORATIVE TECHNOLOGY DEVELOPMENT PROJECT FOR NEXT GENERATION CO2 SEPARATION, CAPTURE AND GEOLOGIC SEQUESTRATION

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Helen Kerr

    2003-08-01

    The CO{sub 2} Capture Project (CCP) is a joint industry project, funded by eight energy companies (BP, ChevronTexaco, EnCana, Eni, Norsk Hydro, Shell, Statoil, and Suncor) and three government agencies (1) European Union (DG Res & DG Tren), (2) Norway (Klimatek) and (3) the U.S.A. (Department of Energy). The project objective is to develop new technologies, which could reduce the cost of CO{sub 2} capture and geologic storage by 50% for retrofit to existing plants and 75% for new-build plants. Technologies are to be developed to ''proof of concept'' stage by the end of 2003. The project budget is approximately $24 million over 3 years and the work program is divided into eight major activity areas: (1) Baseline Design and Cost Estimation--defined the uncontrolled emissions from each facility and estimate the cost of abatement in $/tonne CO{sub 2}. (2) Capture Technology, Post Combustion: technologies, which can remove CO{sub 2} from exhaust gases after combustion. (3) Capture Technology, Oxyfuel: where oxygen is separated from the air and then burned with hydrocarbons to produce an exhaust with high CO{sub 2} for storage. (4) Capture Technology, Pre -Combustion: in which, natural gas and petroleum coke are converted to hydrogen and CO{sub 2} in a reformer/gasifier. (5) Common Economic Model/Technology Screening: analysis and evaluation of each technology applied to the scenarios to provide meaningful and consistent comparison. (6) New Technology Cost Estimation: on a consistent basis with the baseline above, to demonstrate cost reductions. (7) Geologic Storage, Monitoring and Verification (SMV): providing assurance that CO{sub 2} can be safely stored in geologic formations over the long term. (8) Non-Technical: project management, communication of results and a review of current policies and incentives governing CO{sub 2} capture and storage. Technology development work dominated the past six months of the project. Numerous studies are making

  2. IPR 2016. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-05-15

    The volume on the meeting of pediatric radiology includes abstract on the following issues: chest, cardiovascular system, neuroradiology, CT radiation DRs (diagnostic reference levels) and dose reporting guidelines, genitourinary imaging, gastrointestinal radiology, oncology an nuclear medicine, whole body imaging, fetal/neonates imaging, child abuse, oncology and hybrid imaging, value added imaging, muscoskeletal imaging, dose and radiation safety, imaging children - immobilization and distraction techniques, information - education - QI and healthcare policy, ALARA, the knowledge skills and competences for a technologist/radiographer in pediatric radiology, full exploitation of new technological features in pediatric CT, image quality issues in pediatrics, abdominal imaging, interventional radiology, MR contrast agents, tumor - mass imaging, cardiothoracic imaging, ultrasonography.

  3. Advanced separation technology for flue gas cleanup. Quarterly technical report No. 11, October 1994--December 1994

    Energy Technology Data Exchange (ETDEWEB)

    Bhown, A.S.; Alvarado, D.; Pakala, N. [and others

    1994-12-01

    The objective of this work is to develop a novel system for regenerable SO{sub 2} and NO{sub x} scrubbing of flue gas that focuses on (a) a novel method for regeneration of spent SO{sub 2} scrubbing liquor and (b) novel chemistry for reversible absorption of NO{sub x}. In addition, high efficiency hollow fiber contactors (HFC) are proposed as the devices for scrubbing the SO{sub 2} and NO{sub x} from the flue gas. The system will be designed to remove more than 95% of the SO{sub x} and more than 75% of the NO{sub x} from flue gases typical of pulverized coal-fired power plants at a cost that is at least 20% less than combined wet limestone scrubbing of SO{sub x} and selective catalytic reduction of NO{sub x}. In addition, the process will make only marketable byproducts, if any (no waste streams). The major cost item in existing technology is capital investment. Therefore, our approach is to reduce the capital cost by using high efficiency hollow fiber devices for absorbing and desorbing the SO{sub 2} and NO{sub x}. We will also introduce new process chemistry to minimize traditionally well-known problems with SO{sub 2} and NO{sub x} absorption and desorption. For example, we will extract the SO{sub 2} from the aqueous scrubbing liquor into an oligomer of dimethylaniline to avoid the problem of organic liquid losses in the regeneration of the organic liquid.

  4. Cryo magnetic separation adaptation to environment technologies: application to industrial effluents; Adaptation de la separation cryomagnetique aux technologies de l`environnement: application a l`epuration d`effluents liquides industriels

    Energy Technology Data Exchange (ETDEWEB)

    Bureau, V.

    1993-12-20

    Cryomagnetic separation adaptation to environment technologies application to industrial liquid effluents. The performance, obtained by superconducting high filed - high gradient magnetic separation, permitted to foresee the magnetic treatment of heavy metals in rinse waters, derived from the surface finishing industry. The paramagnetic ions, precipitated in basic media as hydroxides, present a very hydrated amorphous structure, which masks their subjacent magnetic properties. Coprecipitation of a `magnetic carrier`, jointly with the heavy metals, has been studied: ferric chloride forms in basic media, an hydrated iron oxide. Its structure is of the goethite type, and it stabilizes as hematite. The magnetic susceptibility of the obtained product is still weak and its crystalline structure is not enough affirmative to utilize magnetic filtration with efficiency. Mixture of ferrous sulphate and ferric chloride forms, in a basic media, an hydrated magnetite. Initial ideal ratio between divalent iron and trivalent iron, varies between 0,5 and 1,2. This mixture, coprecipitated with the heavy metals, permits to optimize the magnetic cleaning of the fluids in a high field - high gradient filter. (author)

  5. Evaluation report on the R and D of the membrane separation process introduction technology; Makubunri process donyu gijutsu no kenkyu kaihatsu hyoka hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper reported the R and D of the membrane separation process introduction technology during a period of 1994 through 1998. The membrane separation technology is not associated with the phase change which requires large energy and expected to be an energy saving process. For the production of membranes required of high functions, the vapor deposition polymerization method was considered, and high order structure control of the membrane, control of adhesion and attachment, and control of orientation, and development of the high polymerization technology were required. For the high grade control of vapor polymerization, the substrate surface structure/quality were important. The molecular level analysis of the vapor deposition surface was also needed. Therefore, the paper took notice of STM (scanning tunneling microscopy), AFM (atomic force microscopy) and HREELS (high resolution electron energy loss spectroscopy) as surface atomic/molecular configuration analysis technology, and designed/fabricated and studied the high resolving power and high sensitivity analysis equipment using the analysis equipment which combined HREELS and STM and the analysis equipment using SFG (sum frequency generation) which can detect signals in the low frequency region. Making full use of the highest technology, technology was able to be developed for substrate surface analysis and surface reaction analysis technologies which become the basis of the high performance separation membrane fabrication technology by the vapor deposition polymerization method indispensable for introduction of the membrane separation process. The technology can be the base applicable to a lot of fields where surfaces and interfaces are concerned

  6. IEEE conference record -- Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    This conference covers the following areas: computational plasma physics; vacuum electronic; basic phenomena in fully ionized plasmas; plasma, electron, and ion sources; environmental/energy issues in plasma science; space plasmas; plasma processing; ball lightning/spherical plasma configurations; plasma processing; fast wave devices; magnetic fusion; basic phenomena in partially ionized plasma; dense plasma focus; plasma diagnostics; basic phenomena in weakly ionized gases; fast opening switches; MHD; fast z-pinches and x-ray lasers; intense ion and electron beams; laser-produced plasmas; microwave plasma interactions; EM and ETH launchers; solid state plasmas and switches; intense beam microwaves; and plasmas for lighting. Separate abstracts were prepared for 416 papers in this conference.

  7. IEEE conference record -- Abstracts

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    This conference covers the following areas: computational plasma physics; vacuum electronic; basic phenomena in fully ionized plasmas; plasma, electron, and ion sources; environmental/energy issues in plasma science; space plasmas; plasma processing; ball lightning/spherical plasma configurations; plasma processing; fast wave devices; magnetic fusion; basic phenomena in partially ionized plasma; dense plasma focus; plasma diagnostics; basic phenomena in weakly ionized gases; fast opening switches; MHD; fast z-pinches and x-ray lasers; intense ion and electron beams; laser-produced plasmas; microwave plasma interactions; EM and ETH launchers; solid state plasmas and switches; intense beam microwaves; and plasmas for lighting. Separate abstracts were prepared for 416 papers in this conference

  8. Book of Program and Abstracts of the 45th Annual Meeting of the Israel Physical Society and the Second Conference of the Israel Plasma Science and Technology Association

    International Nuclear Information System (INIS)

    1999-01-01

    This is the book of abstracts of the 45th annual meeting of the Israel Physical Society. Some of the subjects are: condensed matter; atomic and nuclear physics; quantum mechanics; particles and fields; quantum optics and plasma physics

  9. The effect of technology assisted therapy for intellectually and visually impaired adults suffering from separation anxiety: Conquering the fear.

    Science.gov (United States)

    Hoffman, N; Sterkenburg, P S; Van Rensburg, E

    2017-10-16

    Persons with an intellectual disability (ID) are at risk of developing separation anxiety (SA) and, if left untreated, this can be a risk factor for the development of psychopathology. The effects of an intervention, namely technology assisted therapy for SA (TTSA), were examined on the SA, challenging behavior, psychosocial functioning, and quality of life (QOL) experienced by moderate to mild intellectually and visually disabled adults. This study aimed to determine whether TTSA reduces SA and challenging behavior in persons with ID and visual impairment, and if this results in increased psychosocial functioning and QOL. A pre-experimental within-group design with randomized multiple baselines and staggered intervention start-points was used (n = 6). The variables were monitored with standardized instruments. The frequencies of each participant's use of the technology and the frequency and intensity of their behavior were recorded over time. Results indicate that the SA and challenging behavior experienced by the participants decreased significantly and their psychosocial functioning and QOL increased significantly. The conclusions are that TTSA has the potential to be a valid intervention to address SA in adults with visual and moderate to mild IDs.

  10. From Abstract Art to Abstracted Artists

    Directory of Open Access Journals (Sweden)

    Romi Mikulinsky

    2016-11-01

    Full Text Available What lineage connects early abstract films and machine-generated YouTube videos? Hans Richter’s famous piece Rhythmus 21 is considered to be the first abstract film in the experimental tradition. The Webdriver Torso YouTube channel is composed of hundreds of thousands of machine-generated test patterns designed to check frequency signals on YouTube. This article discusses geometric abstraction vis-à-vis new vision, conceptual art and algorithmic art. It argues that the Webdriver Torso is an artistic marvel indicative of a form we call mathematical abstraction, which is art performed by computers and, quite possibly, for computers.

  11. ABSTRACTION OF DRIFT SEEPAGE

    International Nuclear Information System (INIS)

    Wilson, Michael L.

    2001-01-01

    Drift seepage refers to flow of liquid water into repository emplacement drifts, where it can potentially contribute to degradation of the engineered systems and release and transport of radionuclides within the drifts. Because of these important effects, seepage into emplacement drifts is listed as a ''principal factor for the postclosure safety case'' in the screening criteria for grading of data in Attachment 1 of AP-3.15Q, Rev. 2, ''Managing Technical Product Inputs''. Abstraction refers to distillation of the essential components of a process model into a form suitable for use in total-system performance assessment (TSPA). Thus, the purpose of this analysis/model is to put the information generated by the seepage process modeling in a form appropriate for use in the TSPA for the Site Recommendation. This report also supports the Unsaturated-Zone Flow and Transport Process Model Report. The scope of the work is discussed below. This analysis/model is governed by the ''Technical Work Plan for Unsaturated Zone Flow and Transport Process Model Report'' (CRWMS MandO 2000a). Details of this activity are in Addendum A of the technical work plan. The original Work Direction and Planning Document is included as Attachment 7 of Addendum A. Note that the Work Direction and Planning Document contains tasks identified for both Performance Assessment Operations (PAO) and Natural Environment Program Operations (NEPO). Only the PAO tasks are documented here. The planning for the NEPO activities is now in Addendum D of the same technical work plan and the work is documented in a separate report (CRWMS MandO 2000b). The Project has been reorganized since the document was written. The responsible organizations in the new structure are the Performance Assessment Department and the Unsaturated Zone Department, respectively. The work plan for the seepage abstraction calls for determining an appropriate abstraction methodology, determining uncertainties in seepage, and providing

  12. Programme and abstracts

    International Nuclear Information System (INIS)

    1975-01-01

    Abstracts of 25 papers presented at the congress are given. The abstracts cover various topics including radiotherapy, radiopharmaceuticals, radioimmunoassay, health physics, radiation protection and nuclear medicine

  13. 'Development of mutual separation technology of minor actinides by the novel hydrophilic and lipophilic diamide compounds' summary of the researches for three years (Contract research)

    International Nuclear Information System (INIS)

    Sasaki, Yuji; Tsubata, Yasuhiro; Kitatsuji, Yoshihiro; Shirasu, Noriko; Sugo, Yumi; Ikeda, Yasuhisa; Kawasaki, Takeshi; Suzuki, Tomoya; Mimura, Hitoshi; Usuda, Shigekazu; Yamanishi, Kei

    2014-06-01

    The researches on Development of mutual separation technology of minor actinides by the novel hydrophilic and lipophilic diamide compounds, entrusted to 'Japan Atomic Energy Agency' by the Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT), from 2010 to 2012 are summarized. This project was composed of three themes, those are (1) Development of total recovery of MA+Ln: basic researches for new extractant, DOODA, (2) Development of mutual separation of Am/Cm/Ln: basic researches of Ln-complex, solvent extraction, and extraction chromatography, and (3) Evaluation of separation technique: process simulation. For topic (1), we summarized the information on characteristic of DOODA extractant. For topic (2), we summarized the information on structures of Ln-complexes, solvent extraction and chromatography. For topic (3), we summarized the information on conditions of mixer-settler and evaluation of each fraction separated. (author)

  14. Fictional Separation Logic

    DEFF Research Database (Denmark)

    Jensen, Jonas Buhrkal; Birkedal, Lars

    2012-01-01

    , separation means physical separation. In this paper, we introduce \\emph{fictional separation logic}, which includes more general forms of fictional separating conjunctions P * Q, where "*" does not require physical separation, but may also be used in situations where the memory resources described by P and Q...... overlap. We demonstrate, via a range of examples, how fictional separation logic can be used to reason locally and modularly about mutable abstract data types, possibly implemented using sophisticated sharing. Fictional separation logic is defined on top of standard separation logic, and both the meta...

  15. Cell surface engineering of Saccharomyces cerevisiae combined with membrane separation technology for xylitol production from rice straw hydrolysate.

    Science.gov (United States)

    Guirimand, Gregory; Sasaki, Kengo; Inokuma, Kentaro; Bamba, Takahiro; Hasunuma, Tomohisa; Kondo, Akihiko

    2016-04-01

    Xylitol, a value-added polyol deriving from D-xylose, is widely used in both the food and pharmaceutical industries. Despite extensive studies aiming to streamline the production of xylitol, the manufacturing cost of this product remains high while demand is constantly growing worldwide. Biotechnological production of xylitol from lignocellulosic waste may constitute an advantageous and sustainable option to address this issue. However, to date, there have been few reports of biomass conversion to xylitol. In the present study, xylitol was directly produced from rice straw hydrolysate using a recombinant Saccharomyces cerevisiae YPH499 strain expressing cytosolic xylose reductase (XR), along with β-glucosidase (BGL), xylosidase (XYL), and xylanase (XYN) enzymes (co-)displayed on the cell surface; xylitol production by this strain did not require addition of any commercial enzymes. All of these enzymes contributed to the consolidated bioprocessing (CBP) of the lignocellulosic hydrolysate to xylitol to produce 5.8 g/L xylitol with 79.5 % of theoretical yield from xylose contained in the biomass. Furthermore, nanofiltration of the rice straw hydrolysate provided removal of fermentation inhibitors while simultaneously increasing sugar concentrations, facilitating high concentration xylitol production (37.9 g/L) in the CBP. This study is the first report (to our knowledge) of the combination of cell surface engineering approach and membrane separation technology for xylitol production, which could be extended to further industrial applications.

  16. Exoplanets and Multiverses (Abstract)

    Science.gov (United States)

    Trimble, V.

    2016-12-01

    (Abstract only) To the ancients, the Earth was the Universe, of a size to be crossed by a god in a day, by boat or chariot, and by humans in a lifetime. Thus an exoplanet would have been a multiverse. The ideas gradually separated over centuries, with gradual acceptance of a sun-centered solar system, the stars as suns likely to have their own planets, other galaxies beyond the Milky Way, and so forth. And whenever the community divided between "just one' of anything versus "many," the "manies" have won. Discoveries beginning in 1991 and 1995 have gradually led to a battalion or two of planets orbiting other stars, very few like our own little family, and to moderately serious consideration of even larger numbers of other universes, again very few like our own. I'm betting, however, on habitable (though not necessarily inhabited) exoplanets to be found, and habitable (though again not necessarily inhabited) universes. Only the former will yield pretty pictures.

  17. Waste-paper recyling in the packaging industry. January 1982-August 1989 (a Bibliography from Packaging Science and Technology Abstracts data base). Report for January 1982-August 1989

    Energy Technology Data Exchange (ETDEWEB)

    1990-03-01

    This bibliography contains citations concerning the reclamation and re-use of waste paper in the packaging industry. Uses of recycled papers include containers, paper manufacture, paperboard products, and other packaging applications. Economics, environmental impacts, legislation, and feasibility studies are included. Problems associated with recycling paper products, and comparisons with plastic products are also considered. Biodegradation of packaging materials is considered in separate bibliographies. (Contains 142 citations fully indexed and including a title list.)

  18. Overview of the biomedical and environmental programs at the Oak Ridge National Laboratory. [Lead abstract

    Energy Technology Data Exchange (ETDEWEB)

    Pfuderer, H.A.; Moody, J.B. (comps.)

    1981-07-01

    Separate abstracts were prepared for each of the 6 chapters presented by the six divisions involved in the Biomedical and Environmental Sciences Program at Oak Ridge National Laboratory. The introduction is not covered by an abstract and deals with the environmental, health and safety considerations of energy technology decisions, the major initiatives now being taken by these 6 divisions, and recent major accomplishments in the biomedical and environmental science program. (KRM)

  19. Onboard Inert Gas Generation System/Onboard Oxygen Gas Generation System (OBIGGS/OBOGS) Study. Part 2; Gas Separation Technology--State of the Art

    Science.gov (United States)

    Reynolds, Thomas L.; Eklund, Thor I.; Haack, Gregory A.

    2001-01-01

    This purpose of this contract study task was to investigate the State of the Art in Gas Separation Technologies utilized for separating air into both nitrogen and oxygen gases for potential applications on commercial aircraft. The intended applications included: nitrogen gas for fuel tank inerting, cargo compartment fire protection, and emergency oxygen for passenger and crew use in the event of loss of cabin pressure. The approach was to investigate three principle methods of gas separation: Hollow Fiber Membrane (HFM), Ceramic Membrane (CM), and liquefaction: Total Atmospheric Liquefaction of Oxygen and Nitrogen (TALON). Additional data on the performance of molecular sieve pressure swing adsorption (PSA) systems was also collected and discussed. Performance comparisons of these technologies are contained in the body of the report.

  20. Program and abstracts

    International Nuclear Information System (INIS)

    1975-01-01

    Abstracts of the papers given at the conference are presented. The abstracts are arranged under sessions entitled:Theoretical Physics; Nuclear Physics; Solid State Physics; Spectroscopy; Physics Education; SANCGASS; Astronomy; Plasma Physics; Physics in Industry; Applied and General Physics

  1. SRS scientific and technical abstracts, July--September 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-10-01

    This document focuses on the scientific and technical information (STT) reports, articles, and presentations generated at the site by various authors and organizations of Westinghouse Savannah River Company and its subcontractors. Abstracts of these STI products are contained within this document. The abstracts have been compiled as they originally appeared in the source reports. No changes to the content have been made except as necessary to correct errors of spelling, to reduce abstract length, or to ensure that the information is unclassified. The abstracts are organized according to information categories (``UC`` categories) established by the Department of Energy`s Office of Scientific and Technical Information (OSTI). When reports fall into more than one category, their abstract is included as an entry in the most applicable section of this document. UC-700 General, Miscellaneous, and Progress Reports, UC-701 Chemistry, UC-702 Environmental Sciences, UC-703 Geosciences, UC-704 Materials, UC-705 Mathematics and Computer Sciences, UC-706 Engineering, Equipment, and Instruments, UC-707 Health and Safety, UC-708 Biological Sciences, UC-711 Chemical Separation Processes for Plutonium and Uranium, UC-712 Inertial Confinement Fusion, UC-713 Radioisotope and Radiation Applications, UC-714 Criticality Studies, UC-715 Technology - Feed Materials, UC-721 Defense Waste Management, UC-722 Transportation of Nuclear Materials, UC-731 Nuclear Materials Production, UC-732 Special Isotope Separation (Plutonium), UC-733 Nuclear Raw Materials, UC-741 Chemical High Explosives, UC-742 Applications of Explosions, UC-743 Nuclear Propulsion Systems, UC-744 Aerospace Nuclear Safety, and Index 91.

  2. SRS scientific and technical abstracts, July--September 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-10-01

    This document focuses on the scientific and technical information (STT) reports, articles, and presentations generated at the site by various authors and organizations of Westinghouse Savannah River Company and its subcontractors. Abstracts of these STI products are contained within this document. The abstracts have been compiled as they originally appeared in the source reports. No changes to the content have been made except as necessary to correct errors of spelling, to reduce abstract length, or to ensure that the information is unclassified. The abstracts are organized according to information categories ( UC'' categories) established by the Department of Energy's Office of Scientific and Technical Information (OSTI). When reports fall into more than one category, their abstract is included as an entry in the most applicable section of this document. UC-700 General, Miscellaneous, and Progress Reports, UC-701 Chemistry, UC-702 Environmental Sciences, UC-703 Geosciences, UC-704 Materials, UC-705 Mathematics and Computer Sciences, UC-706 Engineering, Equipment, and Instruments, UC-707 Health and Safety, UC-708 Biological Sciences, UC-711 Chemical Separation Processes for Plutonium and Uranium, UC-712 Inertial Confinement Fusion, UC-713 Radioisotope and Radiation Applications, UC-714 Criticality Studies, UC-715 Technology - Feed Materials, UC-721 Defense Waste Management, UC-722 Transportation of Nuclear Materials, UC-731 Nuclear Materials Production, UC-732 Special Isotope Separation (Plutonium), UC-733 Nuclear Raw Materials, UC-741 Chemical High Explosives, UC-742 Applications of Explosions, UC-743 Nuclear Propulsion Systems, UC-744 Aerospace Nuclear Safety, and Index 91.

  3. Dramatically improve the Safety Performance of Li ion Battery Separators and Reduce the Manufacturing Cost Using Ultraviolet Curing and High Precision Coating Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Voelker, Gary [Miltec UV International, LLC, Stevensville, MD (United States); Arnold, John [Miltec UV International, LLC, Stevensville, MD (United States)

    2017-06-30

    The objective of this project was to improve the safety of operation of Lithium ion batteries (LIB)and at the same time significantly reduce the manufacturing cost of LIB separators. The project was very successful in demonstrating the improved performance and reduced cost attributed to using UV curable binder and high speed printing technology to place a very thin and precisely controlled ceramic layer on the surface of base separators made of polyolefins such as Polyethylene, Polypropylene and combinations of the two as well as cellulosic base separators. The underlying need for this new technology is the recently identified potential of fire in large format Lithium ion batteries used in hybrid, plug-in hybrid and electric vehicles. The primary potential cause of battery fire is thermal runaway caused by several different electrical or mechanical mechanisms; such as, overcharge, puncture, overheating, compaction, and internal short circuit. During thermal runaway, the ideal separator prevents ion flow and continues to physically separate the anode from the cathode. If the temperature of the battery gets higher, the separator may melt and partially clog the pores and help prevent ion flows but it also can shrink which can result in physical contact of the electrodes and accelerate thermal run-away even further. Ceramic coated separators eliminate many of the problems related to the usage of traditional separators. The ceramic coating provides an electrically insulating layer that retains its physical integrity at high temperature, allows for more efficient thermal heat transfer, helps reduce thermal shrinkage, and inhibits dendrite growth that could create a potential short circuit. The use of Ultraviolet (UV) chemistry to bind fine ceramic particles on separators is a unique and innovative approach primarily because of the instant curing of the UV curable binder upon exposure to UV light. This significant reduction in drying/curing time significantly reduces the

  4. Chemical Technology Division annual progress report for period ending March 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Ferguson, D.E.

    1978-08-01

    Separate abstracts were prepared for the various sections on fission energy, coal conversion and utilization, waste management, basic science and technology, biotechnology and environmental studies, special isotope production and separations, Nuclear Regulatory Commission programs, and miscellaneous programs.

  5. Pulmonary toxicology of respirable particles. [Lead abstract

    Energy Technology Data Exchange (ETDEWEB)

    Sanders, C.L.; Cross, F.T.; Dagle, G.E.; Mahaffey, J.A. (eds.)

    1980-09-01

    Separate abstracts were prepared for the 44 papers presented in these proceedings. The last paper (Stannard) in the proceedings is an historical review of the field of inhalation toxicology and is not included in the analytics. (DS)

  6. Nuclear technology for the year 2000

    International Nuclear Information System (INIS)

    1987-01-01

    Eighteen papers and abstracts are presented under the following session headings: space nuclear power, health physics and dosimetry, nuclear design and thermal hydraulics, nuclear diagnostics, and fusion technology and plasma physics. The papers were processed separately for the data base

  7. Costs of slurry separation technologies and alternative use of the solid fraction for biogas production or burning

    DEFF Research Database (Denmark)

    Jacobsen, Brian H.

    2011-01-01

    parameters are livestock density, transport distance and cost of separation. The conclusion is that unless land prices or prices on slurry agreements are very high, traditional handling of animal manure has the lowest costs. Decanter separation can be the cheapest if area is limited and co...

  8. Stellar Presentations (Abstract)

    Science.gov (United States)

    Young, D.

    2015-12-01

    (Abstract only) The AAVSO is in the process of expanding its education, outreach and speakers bureau program. powerpoint presentations prepared for specific target audiences such as AAVSO members, educators, students, the general public, and Science Olympiad teams, coaches, event supervisors, and state directors will be available online for members to use. The presentations range from specific and general content relating to stellar evolution and variable stars to specific activities for a workshop environment. A presentation—even with a general topic—that works for high school students will not work for educators, Science Olympiad teams, or the general public. Each audience is unique and requires a different approach. The current environment necessitates presentations that are captivating for a younger generation that is embedded in a highly visual and sound-bite world of social media, twitter and U-Tube, and mobile devices. For educators, presentations and workshops for themselves and their students must support the Next Generation Science Standards (NGSS), the Common Core Content Standards, and the Science Technology, Engineering and Mathematics (STEM) initiative. Current best practices for developing relevant and engaging powerpoint presentations to deliver information to a variety of targeted audiences will be presented along with several examples.

  9. Disruptive Innovation in Manufacturing Engineering towards the 4th Industrial Revolution: 8th International Conference on Digital Enterprise Technology, DET 2014, March 25 -28 2014, Stuttgart, Germany, Abstracts

    OpenAIRE

    Bauer, Wilhelm; Constantinescu, Carmen; Sauer, Olaf; Maropoulos, Paul; Muelaner, Jody

    2014-01-01

    The CIRP sponsored DET 2014 conference focusses on the employment of modern ICT-technologies and tools for the modeling, simulation, optimization, advanced control and monitoring, real-time visualization of products, factories and manufacturing processes. The addressed areas cover all phases of product, factory and manufacturing processes life cycle starting with product design and development, engineering of factories, machines, equipment and technical processes, commissioning and rump-up, f...

  10. National Radiological Conference (Conference information and abstract)

    International Nuclear Information System (INIS)

    Khan, A.U.

    1998-01-01

    The national radiological conference was held at Peshawar, Pakistan. This book gives the conference information and abstracts of papers presented in the conference. There are about 37 abstracts submitted for the conference and related nature of the materials. Out of these 37 papers 17 are of nuclear oriented which are presented here separately. (A.B.)

  11. Compilation of Theses Abstracts

    National Research Council Canada - National Science Library

    2005-01-01

    This publication contains unclassified/unrestricted abstracts of classified or restricted theses submitted for the degrees of Doctor of Philosophy, Master of Business Administration, Master of Science...

  12. Computational Abstraction Steps

    DEFF Research Database (Denmark)

    Thomsen, Lone Leth; Thomsen, Bent; Nørmark, Kurt

    2010-01-01

    and class instantiations. Our teaching experience shows that many novice programmers find it difficult to write programs with abstractions that materialise to concrete objects later in the development process. The contribution of this paper is the idea of initiating a programming process by creating......In this paper we discuss computational abstraction steps as a way to create class abstractions from concrete objects, and from examples. Computational abstraction steps are regarded as symmetric counterparts to computational concretisation steps, which are well-known in terms of function calls...

  13. Nuclear medicine. Abstracts; Nuklearmedizin 2000. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2000-07-01

    This issue of the journal contains the abstracts of the 183 conference papers as well as 266 posters presented at the conference. Subject fields covered are: Neurology, psychology, oncology, pediatrics, radiopharmacy, endocrinology, EDP, measuring equipment and methods, radiological protection, cardiology, and therapy. (orig./CB) [German] Die vorliegende Zeitschrift enthaelt die Kurzfassungen der 183 auf der Tagung gehaltenen Vortraege sowie der 226 praesentierten Poster, die sich mit den folgenden Themen befassten: Neurologie, Psychiatrie, Onkologie, Paediatrie, Radiopharmazie, Endokrinologie, EDV, Messtechnik, Strahlenschutz, Kardiologie sowie Therapie. (MG)

  14. Performance and techno-economic assessment of several solid-liquid separation technologies for processing dilute-acid pretreated corn stover.

    Science.gov (United States)

    Sievers, David A; Tao, Ling; Schell, Daniel J

    2014-09-01

    Solid-liquid separation of pretreated lignocellulosic biomass slurries is a critical unit operation employed in several different processes for production of fuels and chemicals. An effective separation process achieves good recovery of solute (sugars) and efficient dewatering of the biomass slurry. Dilute acid pretreated corn stover slurries were subjected to pressure and vacuum filtration and basket centrifugation to evaluate the technical and economic merits of these technologies. Experimental performance results were used to perform detailed process simulations and economic analysis using a 2000 tonne/day biorefinery model to determine differences between the various filtration methods and their process settings. The filtration processes were able to successfully separate pretreated slurries into liquor and solid fractions with estimated sugar recoveries of at least 95% using a cake washing process. A continuous vacuum belt filter produced the most favorable process economics. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Neighbourhood Abstraction in GROOVE

    NARCIS (Netherlands)

    Rensink, Arend; Zambon, Eduardo; De Lara, J.; Varro, D.

    2011-01-01

    Important classes of graph grammars have infinite state spaces and therefore cannot be verified with traditional model checking techniques. One way to address this problem is to perform graph abstraction, which allows us to generate a finite abstract state space that over-approximates the original

  16. Truthful Monadic Abstractions

    DEFF Research Database (Denmark)

    Brock-Nannestad, Taus; Schürmann, Carsten

    2012-01-01

    indefinitely, finding neither a proof nor a disproof of a given subgoal. In this paper we characterize a family of truth-preserving abstractions from intuitionistic first-order logic to the monadic fragment of classical first-order logic. Because they are truthful, these abstractions can be used to disprove...

  17. Check Sample Abstracts.

    Science.gov (United States)

    Alter, David; Grenache, David G; Bosler, David S; Karcher, Raymond E; Nichols, James; Rajadhyaksha, Aparna; Camelo-Piragua, Sandra; Rauch, Carol; Huddleston, Brent J; Frank, Elizabeth L; Sluss, Patrick M; Lewandrowski, Kent; Eichhorn, John H; Hall, Janet E; Rahman, Saud S; McPherson, Richard A; Kiechle, Frederick L; Hammett-Stabler, Catherine; Pierce, Kristin A; Kloehn, Erica A; Thomas, Patricia A; Walts, Ann E; Madan, Rashna; Schlesinger, Kathie; Nawgiri, Ranjana; Bhutani, Manoop; Kanber, Yonca; Abati, Andrea; Atkins, Kristen A; Farrar, Robert; Gopez, Evelyn Valencerina; Jhala, Darshana; Griffin, Sonya; Jhala, Khushboo; Jhala, Nirag; Bentz, Joel S; Emerson, Lyska; Chadwick, Barbara E; Barroeta, Julieta E; Baloch, Zubair W; Collins, Brian T; Middleton, Owen L; Davis, Gregory G; Haden-Pinneri, Kathryn; Chu, Albert Y; Keylock, Joren B; Ramoso, Robert; Thoene, Cynthia A; Stewart, Donna; Pierce, Arand; Barry, Michelle; Aljinovic, Nika; Gardner, David L; Barry, Michelle; Shields, Lisa B E; Arnold, Jack; Stewart, Donna; Martin, Erica L; Rakow, Rex J; Paddock, Christopher; Zaki, Sherif R; Prahlow, Joseph A; Stewart, Donna; Shields, Lisa B E; Rolf, Cristin M; Falzon, Andrew L; Hudacki, Rachel; Mazzella, Fermina M; Bethel, Melissa; Zarrin-Khameh, Neda; Gresik, M Vicky; Gill, Ryan; Karlon, William; Etzell, Joan; Deftos, Michael; Karlon, William J; Etzell, Joan E; Wang, Endi; Lu, Chuanyi M; Manion, Elizabeth; Rosenthal, Nancy; Wang, Endi; Lu, Chuanyi M; Tang, Patrick; Petric, Martin; Schade, Andrew E; Hall, Geraldine S; Oethinger, Margret; Hall, Geraldine; Picton, Avis R; Hoang, Linda; Imperial, Miguel Ranoa; Kibsey, Pamela; Waites, Ken; Duffy, Lynn; Hall, Geraldine S; Salangsang, Jo-Anne M; Bravo, Lulette Tricia C; Oethinger, Margaret D; Veras, Emanuela; Silva, Elvia; Vicens, Jimena; Silva, Elvio; Keylock, Joren; Hempel, James; Rushing, Elizabeth; Posligua, Lorena E; Deavers, Michael T; Nash, Jason W; Basturk, Olca; Perle, Mary Ann; Greco, Alba; Lee, Peng; Maru, Dipen; Weydert, Jamie Allen; Stevens, Todd M; Brownlee, Noel A; Kemper, April E; Williams, H James; Oliverio, Brock J; Al-Agha, Osama M; Eskue, Kyle L; Newlands, Shawn D; Eltorky, Mahmoud A; Puri, Puja K; Royer, Michael C; Rush, Walter L; Tavora, Fabio; Galvin, Jeffrey R; Franks, Teri J; Carter, James Elliot; Kahn, Andrea Graciela; Lozada Muñoz, Luis R; Houghton, Dan; Land, Kevin J; Nester, Theresa; Gildea, Jacob; Lefkowitz, Jerry; Lacount, Rachel A; Thompson, Hannis W; Refaai, Majed A; Quillen, Karen; Lopez, Ana Ortega; Goldfinger, Dennis; Muram, Talia; Thompson, Hannis

    2009-02-01

    The following abstracts are compiled from Check Sample exercises published in 2008. These peer-reviewed case studies assist laboratory professionals with continuing medical education and are developed in the areas of clinical chemistry, cytopathology, forensic pathology, hematology, microbiology, surgical pathology, and transfusion medicine. Abstracts for all exercises published in the program will appear annually in AJCP.

  18. Program and abstracts

    International Nuclear Information System (INIS)

    1976-01-01

    Abstracts of the papers given at the conference are presented. The abstracts are arranged under sessions entitled: Theoretical Physics; Nuclear Physics; Solid State Physics; Spectroscopy; Plasma Physics; Solar-Terrestrial Physics; Astrophysics and Astronomy; Radioastronomy; General Physics; Applied Physics; Industrial Physics

  19. Environmentally-friendly oxygen-free roasting/wet magnetic separation technology for in situ recycling cobalt, lithium carbonate and graphite from spent LiCoO{sub 2}/graphite lithium batteries

    Energy Technology Data Exchange (ETDEWEB)

    Li, Jia; Wang, Guangxu; Xu, Zhenming, E-mail: zmxu@sjtu.edu.cn

    2016-01-25

    Highlights: • The idea of “waste + waste → resources.” was used on this study. • Based on thermodynamic analysis, the possible reaction between LiCoO{sub 2} and graphite was obtained. • The residues of oxygen-free roasting are cobalt, lithium carbonate and graphite. • The recovery rate of Co and Li is 95.72% and 98.93% after wet magnetic separation. • It provides the rationale for environmental-friendly recycling spent LIBs in industrial-scale. - Abstract: The definite aim of the present paper is to present some novel methods that use oxygen-free roasting and wet magnetic separation to in situ recycle of cobalt, Lithium Carbonate and Graphite from mixed electrode materials. The in situ recycling means to change waste into resources by its own components, which is an idea of “waste + waste → resources.” After mechanical scraping the mixed electrode materials enrich powders of LiCoO{sub 2} and graphite. The possible reaction between LiCoO{sub 2} and graphite was obtained by thermodynamic analysis. The feasibility of the reaction at high temperature was studied with the simultaneous thermogravimetry analysis under standard atmospheric pressure. Then the oxygen-free roasting/wet magnetic separation method was used to transfer the low added value mixed electrode materials to high added value products. The results indicated that, through the serious technologies of oxygen-free roasting and wet magnetic separation, mixture materials consist with LiCoO{sub 2} and graphite powders are transferred to the individual products of cobalt, Lithium Carbonate and Graphite. Because there is not any chemical solution added in the process, the cost of treating secondary pollution can be saved. This study provides a theoretical basis for industrial-scale recycling resources from spent LIBs.

  20. Development of long-lived radionuclide partitioning technology - Preparation of ion exchanges for selective separation of radioactive elements

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Si Joong; Jeong, Hae In; Shim, Min Sook [Korea University, Seoul (Korea, Republic of); Kim, Jeong [Seonam University, Namwon (Korea, Republic of)

    1995-07-01

    Ion exchanger contained nitrogen-oxygen donor macrocyclic units was synthesized, and immobilization process was carried out by adsorption of the exchanger to silica gel. The binding constants were measured with acid concentration. From the binding constants, selectivity for Pt(II) ion and acid concentration of eluents were determined. The most optimum conditions for the separation were also determined from investigating the effects of amount of immobile phase and column length. And liarit aza-crown ethers were synthesized and selectively separated Cs/Sr ion from mixed metal solution. 37= refs., 24 tabs., 40 figs. (author)

  1. Web technology in the separation of strontium and cesium from INEL-ICPP radioactive acid waste (WM-185)

    International Nuclear Information System (INIS)

    Bray, L.A.; Brown, G.N.

    1995-01-01

    Strontium and cesium were successfully removed from radioactive acidic waste (WM-185) at the Idaho National Engineering Laboratory, Idaho Chemical Processing Plant (ICPP), with web technology from 3M and IBC Advanced Technologies, Inc. (IBC). A technical team from Pacific Northwest Laboratory, ICPP, 3M and IBC conducted a very successful series of experiments from August 15 through 18, 1994. The ICPP, Remote Analytical Laboratory, Idaho Falls, Idaho, provided the hot cell facilities and staff to complete these milestone experiments. The actual waste experiments duplicated the initial 'cold' simulated waste results and confirmed the selective removal provided by ligand-particle web technology

  2. IEEE conference record--Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The following topics were covered in this meeting: basic plasma phenomena and plasma waves; plasma diagnostics; space plasma diagnostics; magnetic fusion; electron, ion and plasma sources; intense electron and ion beams; intense beam microwaves; fast wave M/W devices; microwave plasma interactions; plasma focus; ultrafast Z-pinches; plasma processing; electrical gas discharges; fast opening switches; magnetohydrodynamics; electromagnetic and electrothermal launchers; x-ray lasers; computational plasma science; solid state plasmas and switches; environmental/energy issues in plasma science; vacuum electronics; plasmas for lighting; gaseous electronics; and ball lightning and other spherical plasmas. Separate abstracts were prepared for 278 papers of this conference.

  3. Anaerobic treatment as a core technology for energy, nutrients and water from source-separated domestic waste(water)

    NARCIS (Netherlands)

    Zeeman, G.; Kujawa, K.; Mes, de T.Z.D.; Graaff, de M.S.; Abu-Ghunmi, L.N.A.H.; Mels, A.R.; Meulman, B.; Temmink, B.G.; Buisman, C.J.N.; Lier, van J.B.; Lettinga, G.

    2008-01-01

    Based on results of pilot scale research with source-separated black water (BW) and grey water (GW), a new sanitation concept is proposed. BW and GW are both treated in a UASB (-septic tank) for recovery of CH4 gas. Kitchen waste is added to the anaerobic BW treatment for doubling the biogas

  4. 1977 flywheel technology symposium proceedings. [Fifty-two papers

    Energy Technology Data Exchange (ETDEWEB)

    Chang, G.C.; Stone, R.G. (eds.)

    1978-03-01

    Fifty-two papers, four paper abstracts, and four brief summaries of panel discussions are presented on flywheel energy storage technology. A separate abstract was prepared for each of 41 papers for inclusion in DOE Energy Research Abstracts (ERA). Eleven papers were processed previously for inclusion in the data base. (PMA)

  5. Completeness of Lyapunov Abstraction

    DEFF Research Database (Denmark)

    Wisniewski, Rafal; Sloth, Christoffer

    2013-01-01

    the vector field, which allows the generation of a complete abstraction. To compute the functions that define the subdivision of the state space in an algorithm, we formulate a sum of squares optimization problem. This optimization problem finds the best subdivisioning functions, with respect to the ability......This paper addresses the generation of complete abstractions of polynomial dynamical systems by timed automata. For the proposed abstraction, the state space is divided into cells by sublevel sets of functions. We identify a relation between these functions and their directional derivatives along...

  6. Efficient separations and processing crosscutting program 1996 technical exchange meeting. Proceedings

    International Nuclear Information System (INIS)

    1996-01-01

    This document contains summaries of technology development presented at the 1996 Efficient Separations and Processing Crosscutting Program Technical Exchange Meeting. This meeting is held annually to promote a free exchange of ideas among technology developers, potential users and other interested parties within the EM community. During this meeting the following many separation processes technologies were discussed such as ion exchange, membrane separation, vacuum distillation, selective sorption, and solvent extraction. Other topics discussed include: waste forms; testing or inorganic sorbents for radionuclide and heavy metal removal; selective crystallization; and electrochemical treatment of liquid wastes. This is the leading abstract, individual papers have been indexed separately for the databases

  7. Efficient separations and processing crosscutting program 1996 technical exchange meeting. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    This document contains summaries of technology development presented at the 1996 Efficient Separations and Processing Crosscutting Program Technical Exchange Meeting. This meeting is held annually to promote a free exchange of ideas among technology developers, potential users and other interested parties within the EM community. During this meeting the following many separation processes technologies were discussed such as ion exchange, membrane separation, vacuum distillation, selective sorption, and solvent extraction. Other topics discussed include: waste forms; testing or inorganic sorbents for radionuclide and heavy metal removal; selective crystallization; and electrochemical treatment of liquid wastes. This is the leading abstract, individual papers have been indexed separately for the databases.

  8. Facility decontamination technology workshop

    International Nuclear Information System (INIS)

    1980-10-01

    Purpose of the meeting was to provide a record of experience at nuclear facilities, other than TMI-2, of events and incidents which have required decontamination and dose reduction activities, and to furnish GPU and others involved in the TMI-2 cleanup with the results of that decontamination and dose reduction technology. Separate abstracts were prepared for 24 of the 25 papers; the remaining paper had been previously abstracted

  9. Facility decontamination technology workshop

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-10-01

    Purpose of the meeting was to provide a record of experience at nuclear facilities, other than TMI-2, of events and incidents which have required decontamination and dose reduction activities, and to furnish GPU and others involved in the TMI-2 cleanup with the results of that decontamination and dose reduction technology. Separate abstracts were prepared for 24 of the 25 papers; the remaining paper had been previously abstracted. (DLC)

  10. Science meeting. Abstracts

    International Nuclear Information System (INIS)

    2000-01-01

    the document is a collection of the science meeting abstracts in the fields of nuclear physics, medical sciences, chemistry, agriculture, environment, engineering, material sciences different aspects of energy and presents research done in 2000 in these fields

  11. The deleuzian abstract machines

    DEFF Research Database (Denmark)

    Werner Petersen, Erik

    2005-01-01

    To most people the concept of abstract machines is connected to the name of Alan Turing and the development of the modern computer. The Turing machine is universal, axiomatic and symbolic (E.g. operating on symbols). Inspired by Foucault, Deleuze and Guattari extended the concept of abstract...... machines to singular, non-axiomatic and diagrammatic machines. That is: Machines which constitute becomings. This presentation gives a survey of the development of the concept of abstract machines in the philosophy of Deleuze and Guatari and the function of these abstract machines in the creation of works...... of art. From Difference and Repetition to Anti-Oedipus, the machines are conceived as binary machines based on the exclusive or inclusive use respectively of the three syntheses: conexa, disjuncta and conjuncta. The machines have a twofold embedment: In the desiring-production and in the social...

  12. Mathematical games, abstract games

    CERN Document Server

    Neto, Joao Pedro

    2013-01-01

    User-friendly, visually appealing collection offers both new and classic strategic board games. Includes abstract games for two and three players and mathematical games such as Nim and games on graphs.

  13. International beta-dosimetry symposium. Program and abstracts

    International Nuclear Information System (INIS)

    1983-02-01

    Abstracts of the presentations at the symposium are contained in this volume. Problems associated with beta dosimetry, beta detectors and dosemeters, and current development programs are described. Each abstract has been indexed separately for inclusion in the Energy Data Base

  14. 13th International Mass Spectrometry Conference. Book of Abstracts

    International Nuclear Information System (INIS)

    1994-01-01

    The collection contains abstracts of several hundred papers presented at the international conference on new research and development results and applications of mass spectrometry. Abstracts falling into the INIS scope were indexed separately in the INIS database. (Roboz, P.)

  15. Introduction to abstract algebra

    CERN Document Server

    Smith, Jonathan D H

    2008-01-01

    Taking a slightly different approach from similar texts, Introduction to Abstract Algebra presents abstract algebra as the main tool underlying discrete mathematics and the digital world. It helps students fully understand groups, rings, semigroups, and monoids by rigorously building concepts from first principles. A Quick Introduction to Algebra The first three chapters of the book show how functional composition, cycle notation for permutations, and matrix notation for linear functions provide techniques for practical computation. The author also uses equivalence relations to introduc

  16. Abstract Storage Devices

    OpenAIRE

    Koenig, Robert; Maurer, Ueli; Tessaro, Stefano

    2007-01-01

    A quantum storage device differs radically from a conventional physical storage device. Its state can be set to any value in a certain (infinite) state space, but in general every possible read operation yields only partial information about the stored state. The purpose of this paper is to initiate the study of a combinatorial abstraction, called abstract storage device (ASD), which models deterministic storage devices with the property that only partial information about the state can be re...

  17. Abstracts of contributed papers

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This volume contains 571 abstracts of contributed papers to be presented during the Twelfth US National Congress of Applied Mechanics. Abstracts are arranged in the order in which they fall in the program -- the main sessions are listed chronologically in the Table of Contents. The Author Index is in alphabetical order and lists each paper number (matching the schedule in the Final Program) with its corresponding page number in the book.

  18. Application of thin film composite membranes with forward osmosis technology for the separation of emulsified oil-water

    KAUST Repository

    Duong, Hoang Hanh Phuoc

    2014-02-01

    Large amounts of oily wastewater have been produced from various industries. The main challenge of oily wastewater treatments is to separate the stable emulsified oil particles from water. Therefore, the aim of this study is to investigate the effectiveness of forward osmosis (FO) processes to treat the stable oil-water emulsions. The FO technique has been demonstrated successfully for the treatment of a wide range of oil-water emulsions from a low to a very high concentration up to 200,000. ppm. The dependence of separation performance on oily feed concentration and flow rate has been investigated. Water can be separated from oily feeds containing 500. ppm or 200,000. ppm emulsified oil at a relatively high flux of 16.5±1.2. LMH or 11.8±1.6. LMH respectively by using a thin film composite membrane PAN-TFC and 1. M NaCl as the draw solution. Moreover, this membrane can achieve an oil rejection of 99.88% to produce water with a negligible oil level. Due to the presence of emulsified oil particles in the oily feed solutions, the membrane fouling has been addressed in this study. Better anti-fouling TFC FO membranes are needed. © 2013 Elsevier B.V.

  19. The laboratory technology of discrete molecular separation: the historical development of gel electrophoresis and the material epistemology of biomolecular science, 1945-1970.

    Science.gov (United States)

    Chiang, Howard Hsueh-hao

    2009-01-01

    Preparative and analytical methods developed by separation scientists have played an important role in the history of molecular biology. One such early method is gel electrophoresis, a technique that uses various types of gel as its supporting medium to separate charged molecules based on size and other properties. Historians of science, however, have only recently begun to pay closer attention to this material epistemological dimension of biomolecular science. This paper substantiates the historiographical thread that explores the relationship between modern laboratory practice and the production of scientific knowledge. It traces the historical development of gel electrophoresis from the mid-1940s to the mid-1960s, with careful attention to the interplay between technical developments and disciplinary shifts, especially the rise of molecular biology in this time-frame. Claiming that the early 1950s marked a decisive shift in the evolution of electrophoretic methods from moving boundary to zone electrophoresis, I reconstruct various trajectories in which scientists such as Oliver Smithies sought out the most desirable solid supporting medium for electrophoretic instrumentation. Biomolecular knowledge, I argue, emerged in part from this process of seeking the most appropriate supporting medium that allowed for discrete molecular separation and visualization. The early 1950s, therefore, marked not only an important turning point in the history of separation science, but also a transformative moment in the history of the life sciences as the growth of molecular biology depended in part on the epistemological access to the molecular realm available through these evolving technologies.

  20. Abstracts and Presentations

    International Nuclear Information System (INIS)

    2006-01-01

    This publications related with 'Istanbul Technical University, Energy Workshop and Exhibition' that was held in Center of ITU Suleyman Demirel Culture in Istanbul, Turkey, 22-23 June 2006. A separated for each paper.

  1. Abstract Objects of Verbs

    DEFF Research Database (Denmark)

    Robering, Klaus

    2014-01-01

    Verbs do often take arguments of quite different types. In an orthodox type-theoretic framework this results in an extreme polysemy of many verbs. In this article, it is shown that this unwanted consequence can be avoided when a theory of "abstract objects" is adopted according to which these obj......Verbs do often take arguments of quite different types. In an orthodox type-theoretic framework this results in an extreme polysemy of many verbs. In this article, it is shown that this unwanted consequence can be avoided when a theory of "abstract objects" is adopted according to which...

  2. Equipment Design and Cost Estimation for Small Modular Biomass Systems, Synthesis Gas Cleanup, and Oxygen Separation Equipment; Task 9: Mixed Alcohols From Syngas -- State of Technology

    Energy Technology Data Exchange (ETDEWEB)

    Nexant Inc.

    2006-05-01

    This deliverable is for Task 9, Mixed Alcohols from Syngas: State of Technology, as part of National Renewable Energy Laboratory (NREL) Award ACO-5-44027, ''Equipment Design and Cost Estimation for Small Modular Biomass Systems, Synthesis Gas Cleanup and Oxygen Separation Equipment''. Task 9 supplements the work previously done by NREL in the mixed alcohols section of the 2003 technical report Preliminary Screening--Technical and Economic Assessment of Synthesis Gas to Fuels and Chemicals with Emphasis on the Potential for Biomass-Derived Syngas.

  3. Monadic abstract interpreters

    DEFF Research Database (Denmark)

    Sergey, Ilya; Devriese, Dominique; Might, Matthew

    2013-01-01

    -insensitive analysis. To achieve this unification, we develop a systematic method for transforming a concrete semantics into a monadically-parameterized abstract machine. Changing the monad changes the behavior of the machine. By changing the monad, we recover a spectrum of machines—from the original concrete...

  4. WWNPQFT-2013 - Abstracts

    International Nuclear Information System (INIS)

    Cessac, B.; Bianchi, E.; Bellon, M.; Fried, H.; Krajewski, T.; Schubert, C.; Barre, J.; Hofmann, R.; Muller, B.; Raffaelli, B.

    2014-01-01

    The object of this Workshop is to consolidate and publicize new efforts in non perturbative-like Field Theories, relying in Functional Methods, Renormalization Group, and Dyson-Schwinger Equations. A presentation deals with effective vertices and photon-photon scattering in SU(2) Yang-Mills thermodynamics. This document gathers the abstracts of the presentations

  5. 2002 NASPSA Conference Abstracts.

    Science.gov (United States)

    Journal of Sport & Exercise Psychology, 2002

    2002-01-01

    Contains abstracts from the 2002 conference of the North American Society for the Psychology of Sport and Physical Activity. The publication is divided into three sections: the preconference workshop, "Effective Teaching Methods in the Classroom;" symposia (motor development, motor learning and control, and sport psychology); and free…

  6. The Abstraction Engine

    DEFF Research Database (Denmark)

    Fortescue, Michael David

    The main thesis of this book is that abstraction, far from being confined to higher formsof cognition, language and logical reasoning, has actually been a major driving forcethroughout the evolution of creatures with brains. It is manifest in emotive as well as rationalthought. Wending its way th...

  7. Abstract Film and Beyond.

    Science.gov (United States)

    Le Grice, Malcolm

    A theoretical and historical account of the main preoccupations of makers of abstract films is presented in this book. The book's scope includes discussion of nonrepresentational forms as well as examination of experiments in the manipulation of time in films. The ten chapters discuss the following topics: art and cinematography, the first…

  8. Seismic Consequence Abstraction

    International Nuclear Information System (INIS)

    Gross, M.

    2004-01-01

    The primary purpose of this model report is to develop abstractions for the response of engineered barrier system (EBS) components to seismic hazards at a geologic repository at Yucca Mountain, Nevada, and to define the methodology for using these abstractions in a seismic scenario class for the Total System Performance Assessment - License Application (TSPA-LA). A secondary purpose of this model report is to provide information for criticality studies related to seismic hazards. The seismic hazards addressed herein are vibratory ground motion, fault displacement, and rockfall due to ground motion. The EBS components are the drip shield, the waste package, and the fuel cladding. The requirements for development of the abstractions and the associated algorithms for the seismic scenario class are defined in ''Technical Work Plan For: Regulatory Integration Modeling of Drift Degradation, Waste Package and Drip Shield Vibratory Motion and Seismic Consequences'' (BSC 2004 [DIRS 171520]). The development of these abstractions will provide a more complete representation of flow into and transport from the EBS under disruptive events. The results from this development will also address portions of integrated subissue ENG2, Mechanical Disruption of Engineered Barriers, including the acceptance criteria for this subissue defined in Section 2.2.1.3.2.3 of the ''Yucca Mountain Review Plan, Final Report'' (NRC 2003 [DIRS 163274])

  9. Seismic Consequence Abstraction

    Energy Technology Data Exchange (ETDEWEB)

    M. Gross

    2004-10-25

    The primary purpose of this model report is to develop abstractions for the response of engineered barrier system (EBS) components to seismic hazards at a geologic repository at Yucca Mountain, Nevada, and to define the methodology for using these abstractions in a seismic scenario class for the Total System Performance Assessment - License Application (TSPA-LA). A secondary purpose of this model report is to provide information for criticality studies related to seismic hazards. The seismic hazards addressed herein are vibratory ground motion, fault displacement, and rockfall due to ground motion. The EBS components are the drip shield, the waste package, and the fuel cladding. The requirements for development of the abstractions and the associated algorithms for the seismic scenario class are defined in ''Technical Work Plan For: Regulatory Integration Modeling of Drift Degradation, Waste Package and Drip Shield Vibratory Motion and Seismic Consequences'' (BSC 2004 [DIRS 171520]). The development of these abstractions will provide a more complete representation of flow into and transport from the EBS under disruptive events. The results from this development will also address portions of integrated subissue ENG2, Mechanical Disruption of Engineered Barriers, including the acceptance criteria for this subissue defined in Section 2.2.1.3.2.3 of the ''Yucca Mountain Review Plan, Final Report'' (NRC 2003 [DIRS 163274]).

  10. Abstract Objects of Verbs

    DEFF Research Database (Denmark)

    2014-01-01

    Verbs do often take arguments of quite different types. In an orthodox type-theoretic framework this results in an extreme polysemy of many verbs. In this article, it is shown that this unwanted consequence can be avoided when a theory of "abstract objects" is adopted according to which these obj...

  11. Abstracts of submitted papers

    International Nuclear Information System (INIS)

    1987-01-01

    The conference proceedings contain 152 abstracts of presented papers relating to various aspects of personnel dosimetry, the dosimetry of the working and living environment, various types of dosemeters and spectrometers, the use of radionuclides in various industrial fields, the migration of radionuclides on Czechoslovak territory after the Chernobyl accident, theoretical studies of some parameters of ionizing radiation detectors, and their calibration. (M.D.)

  12. Metaphors in Abstract Thought

    NARCIS (Netherlands)

    I. Boot (Inge)

    2010-01-01

    textabstractThe aim of the dissertation was to investigate the Conceptual Metaphor Theory (CMT, Lakoff & Johnson, 1980, 1999).The CMT proposes that abstract concepts are partly structured by concrete concepts through the mechanism of metaphorical mapping. In Chapter 2 we wanted to investigate the

  13. SPR 2015. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-04-01

    The volume contains the abstracts of the SPR (society for pediatric radiology) 2015 meeting covering the following issues: fetal imaging, muscoskeletal imaging, cardiac imaging, chest imaging, oncologic imaging, tools for process improvement, child abuse, contrast enhanced ultrasound, image gently - update of radiation dose recording/reporting/monitoring - meaningful or useless meaning?, pediatric thoracic imaging, ALARA.

  14. Reflective Abstraction and Representation.

    Science.gov (United States)

    Lewin, Philip

    Piaget's theory of reflective abstraction can supplement cognitive science models of representation by specifying both the act of construction and the component steps through which knowers pass as they acquire knowledge. But, while approaches suggested by cognitive science supplement Piaget by awakening researchers to the role of auxiliary factors…

  15. Building Safe Concurrency Abstractions

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann

    2014-01-01

    Concurrent object-oriented programming in Beta is based on semaphores and coroutines and the ability to define high-level concurrency abstractions like monitors, and rendezvous-based communication, and their associated schedulers. The coroutine mechanism of SIMULA has been generalized into the no...

  16. Poster Session- Extended Abstracts

    Science.gov (United States)

    Jack D. Alexander III; Jean Findley; Brenda K. Kury; Jan L. Beyers; Douglas S. Cram; Terrell T. Baker; Jon C. Boren; Carl Edminster; Sue A. Ferguson; Steven McKay; David Nagel; Trent Piepho; Miriam Rorig; Casey Anderson; Jeanne Hoadley; Paulette L. Ford; Mark C. Andersen; Ed L. Fredrickson; Joe Truett; Gary W. Roemer; Brenda K. Kury; Jennifer Vollmer; Christine L. May; Danny C. Lee; James P. Menakis; Robert E. Keane; Zhi-Liang Zhu; Carol Miller; Brett Davis; Katharine Gray; Ken Mix; William P. Kuvlesky Jr.; D. Lynn Drawe; Marcia G. Narog; Roger D. Ottmar; Robert E. Vihnanek; Clinton S. Wright; Timothy E. Paysen; Burton K. Pendleton; Rosemary L. Pendleton; Carleton S. White; John Rogan; Doug Stow; Janet Franklin; Jennifer Miller; Lisa Levien; Chris Fischer; Emma Underwood; Robert Klinger; Peggy Moore; Clinton S. Wright

    2008-01-01

    Titles found within Poster Session-Extended Abstracts include:Assessment of emergency fire rehabilitation of four fires from the 2000 fire season on the Vale, Oregon, BLM district: review of the density sampling materials and methods: p. 329 Growth of regreen, seeded for erosion control, in the...

  17. Abstract Introduction Materials & Methods

    African Journals Online (AJOL)

    plzfg

    Abstract. Oral administration to male rats of 200mg kg-1 body weight of an extract of Calendula officinalis flowers every day for 60 days did not cause loss of body weight, but decreased significantly the weight of the testis, epididymis, seminal vesicle and ventral prostate. Sperm motility as well as sperm density were reduced ...

  18. Testing abstract behavioral specifications

    NARCIS (Netherlands)

    P.Y.H. Wong; R. Bubel (Richard); F.S. de Boer (Frank); C.P.T. de Gouw (Stijn); M. Gómez-Zamalloa; R Haehnle; K. Meinke; M.A. Sindhu

    2015-01-01

    htmlabstractWe present a range of testing techniques for the Abstract Behavioral Specification (ABS) language and apply them to an industrial case study. ABS is a formal modeling language for highly variable, concurrent, component-based systems. The nature of these systems makes them susceptible to

  19. Impredicative concurrent abstract predicates

    DEFF Research Database (Denmark)

    Svendsen, Kasper; Birkedal, Lars

    2014-01-01

    We present impredicative concurrent abstract predicates { iCAP { a program logic for modular reasoning about concurrent, higher- order, reentrant, imperative code. Building on earlier work, iCAP uses protocols to reason about shared mutable state. A key novel feature of iCAP is the ability to dene...

  20. Leadership Abstracts, 2002.

    Science.gov (United States)

    Wilson, Cynthia, Ed.; Milliron, Mark David, Ed.

    2002-01-01

    This 2002 volume of Leadership Abstracts contains issue numbers 1-12. Articles include: (1) "Skills Certification and Workforce Development: Partnering with Industry and Ourselves," by Jeffrey A. Cantor; (2) "Starting Again: The Brookhaven Success College," by Alice W. Villadsen; (3) "From Digital Divide to Digital Democracy," by Gerardo E. de los…

  1. Circularity and Lambda Abstraction

    DEFF Research Database (Denmark)

    Danvy, Olivier; Thiemann, Peter; Zerny, Ian

    2013-01-01

    unknowns from what is done to them, which we lambda-abstract with functions. The circular unknowns then become dead variables, which we eliminate. The result is a strict circu- lar program a la Pettorossi. This transformation is reversible: given a strict circular program a la Pettorossi, we introduce...

  2. Research and development of basic technologies for next-generation industry. Ultimate evaluation report on research and development of highly efficient polymeric separation membrane material; Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Kokoritsu kobunshi bunrimaku zairyo saishu kenkyu kaihatsu hyoka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-05-01

    For the enhancement of separation process efficiency and energy efficiency in the chemical industry, etc., basic technologies are developed involving high-performance separation membrane materials which are excellent in durability and usable in the field where separation by membranes has been impractical. The liquid mixtures subjected to separation are a neutral organic compound/water system, an acidic organic compound/water system, and a polar organic compound/water system; the gas mixtures subjected to separation are an oxygen/nitrogen system and a carbon monoxide/nitrogen system. After a 10-year/3-phase development endeavors, the initially intended goals are sufficiently achieved. Among those that have to be mentioned is the development of a nonaqueous separation membrane, a supported liquid membrane with amino acid optically active high performance separation capability, a high-precision evaluation unit for gas separation membrane characteristics, a selective permeation membrane with high-level oxygen and carbon monoxide carriers and reactivation technology, a high-performance ethanol separation membrane, a water/polar organic compound separation membrane, and a water/acetic acid separation membrane and stability providing technology. In particular, the water selective permeation membrane for a mixture of water and alcohol has already arrived at the stage of bench plant demonstration. (NEDO)

  3. EBS Radionuclide Transport Abstraction

    International Nuclear Information System (INIS)

    Schreiner, R.

    2001-01-01

    The purpose of this work is to develop the Engineered Barrier System (EBS) radionuclide transport abstraction model, as directed by a written development plan (CRWMS M and O 1999a). This abstraction is the conceptual model that will be used to determine the rate of release of radionuclides from the EBS to the unsaturated zone (UZ) in the total system performance assessment-license application (TSPA-LA). In particular, this model will be used to quantify the time-dependent radionuclide releases from a failed waste package (WP) and their subsequent transport through the EBS to the emplacement drift wall/UZ interface. The development of this conceptual model will allow Performance Assessment Operations (PAO) and its Engineered Barrier Performance Department to provide a more detailed and complete EBS flow and transport abstraction. The results from this conceptual model will allow PA0 to address portions of the key technical issues (KTIs) presented in three NRC Issue Resolution Status Reports (IRSRs): (1) the Evolution of the Near-Field Environment (ENFE), Revision 2 (NRC 1999a), (2) the Container Life and Source Term (CLST), Revision 2 (NRC 1999b), and (3) the Thermal Effects on Flow (TEF), Revision 1 (NRC 1998). The conceptual model for flow and transport in the EBS will be referred to as the ''EBS RT Abstraction'' in this analysis/modeling report (AMR). The scope of this abstraction and report is limited to flow and transport processes. More specifically, this AMR does not discuss elements of the TSPA-SR and TSPA-LA that relate to the EBS but are discussed in other AMRs. These elements include corrosion processes, radionuclide solubility limits, waste form dissolution rates and concentrations of colloidal particles that are generally represented as boundary conditions or input parameters for the EBS RT Abstraction. In effect, this AMR provides the algorithms for transporting radionuclides using the flow geometry and radionuclide concentrations determined by other

  4. Books of invited abstracts

    International Nuclear Information System (INIS)

    2006-01-01

    The objective of the Symposium on Fusion Technology (SOFT) is to exchange information on design, construction and operation of fusion experiments and on the technology for present fusion machines, the next step and power plants. It includes oral and poster presentations as well as an industrial and R (and) D exhibition. The ITER project will be a significant theme of the symposium

  5. Environmental Sciences Division annual progress report for period ending September 30, 1982. Environmental Sciences Division Publication No. 2090. [Lead abstract

    Energy Technology Data Exchange (ETDEWEB)

    1983-04-01

    Separate abstracts were prepared for 12 of the 14 sections of the Environmental Sciences Division annual progress report. The other 2 sections deal with educational activities. The programs discussed deal with advanced fuel energy, toxic substances, environmental impacts of various energy technologies, biomass, low-level radioactive waste management, the global carbon cycle, and aquatic and terrestrial ecology. (KRM)

  6. CMP 2012: conference of moldavian physicists. Abstracts

    International Nuclear Information System (INIS)

    2012-10-01

    This book includes abstracts on various aspects of: materials processing and characterization, crystal growth methods, solid-state and crystal technology, development of condensed matter theory and modeling of materials properties, solid-state device physics, nano science and nano technology, heterostructures, superlattices, quantum wells and wires, advanced quantum physics for nano systems, etc.

  7. CMP 2009: conference of moldavian physicists. Abstracts

    International Nuclear Information System (INIS)

    2009-11-01

    This book includes 151 abstracts on various aspects of: materials processing and characterization, crystal growth methods, solid-state and crystal technology, development of condensed matter theory and modeling of materials properties, solid-state device physics, nano science and nano technology, heterostructures, superlattices, quantum wells and wires, advanced quantum physics for nano systems, etc.

  8. 1986 fuel cell seminar: Program and abstracts

    Energy Technology Data Exchange (ETDEWEB)

    None

    1986-10-01

    Ninety nine brief papers are arranged under the following session headings: gas industry's 40 kw program, solid oxide fuel cell technology, phosphoric acid fuel cell technology, molten carbonate fuel cell technology, phosphoric acid fuel cell systems, power plants technology, fuel cell power plant designs, unconventional fuels, fuel cell application and economic assessments, and plans for commerical development. The papers are processed separately for the data base. (DLC)

  9. Minimalism in architecture: Abstract conceptualization of architecture

    Directory of Open Access Journals (Sweden)

    Vasilski Dragana

    2015-01-01

    Full Text Available Minimalism in architecture contains the idea of the minimum as a leading creative tend to be considered and interpreted in working through phenomena of empathy and abstraction. In the Western culture, the root of this idea is found in empathy of Wilhelm Worringer and abstraction of Kasimir Malevich. In his dissertation, 'Abstraction and Empathy' Worringer presented his thesis on the psychology of style through which he explained the two opposing basic forms: abstraction and empathy. His conclusion on empathy as a psychological basis of observation expression is significant due to the verbal congruence with contemporary minimalist expression. His intuition was enhenced furthermore by figure of Malevich. Abstraction, as an expression of inner unfettered inspiration, has played a crucial role in the development of modern art and architecture of the twentieth century. Abstraction, which is one of the basic methods of learning in psychology (separating relevant from irrelevant features, Carl Jung is used to discover ideas. Minimalism in architecture emphasizes the level of abstraction to which the individual functions are reduced. Different types of abstraction are present: in the form as well as function of the basic elements: walls and windows. The case study is an example of Sou Fujimoto who is unequivocal in its commitment to the autonomy of abstract conceptualization of architecture.

  10. The deleuzian abstract machines

    DEFF Research Database (Denmark)

    Werner Petersen, Erik

    2005-01-01

    in emphasis from the three syntheses to mappings and rhizomatic diagrams that cut across semiotics or “blow apart regimes of signs”. The aim here is the absolute deterritorialization. Deleuze has shown how abstract machines operate in the philosophy of Foucault, the literature of Proust and Kafka......, and the painting of Bacon. We will finish our presentation by showing how these machines apply to architecture....

  11. SPR 2014. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-05-15

    The proceedings of the SPR 2014 meeting include abstracts on the following topics: Body imaging techniques: practical advice for clinic work; thoracic imaging: focus on the lungs; gastrointestinal imaging: focus on the pancreas and bowel; genitourinary imaging: focus on gonadal radiology; muscoskeletal imaging; focus on oncology; child abuse and nor child abuse: focus on radiography; impact of NMR and CT imaging on management of CHD; education and communication: art and practice in pediatric radiology.

  12. SPR 2014. Abstracts

    International Nuclear Information System (INIS)

    2014-01-01

    The proceedings of the SPR 2014 meeting include abstracts on the following topics: Body imaging techniques: practical advice for clinic work; thoracic imaging: focus on the lungs; gastrointestinal imaging: focus on the pancreas and bowel; genitourinary imaging: focus on gonadal radiology; muscoskeletal imaging; focus on oncology; child abuse and nor child abuse: focus on radiography; impact of NMR and CT imaging on management of CHD; education and communication: art and practice in pediatric radiology.

  13. WWNPQFT-2011 - Abstracts

    International Nuclear Information System (INIS)

    Bianchi, E.; Bender, C.; Culetu, H.; Fried, H.; Grossmann, A.; Hofmann, R.; Le Bellac, M.; Martinetti, P.; Muller, B.; Patras, F.; Raffaeli, B.; Vitting Andersen, J.

    2013-01-01

    The object of this workshop is to consolidate and publicize new efforts in non-perturbative field theories. This year the presentations deal with quantum gravity, non-commutative geometry, fat-tailed wave-functions, strongly coupled field theories, space-times two time-like dimensions, and multiplicative renormalization. A presentation is dedicated to the construction of a nucleon-nucleon potential from an analytical, non-perturbative gauge invariant QCD. This document gathers the abstracts of the presentations

  14. A new technology for separation and recovery of materials from waste printed circuit boards by dissolving bromine epoxy resins using ionic liquid.

    Science.gov (United States)

    Zhu, P; Chen, Y; Wang, L Y; Qian, G Y; Zhou, M; Zhou, J

    2012-11-15

    Recovery of valuable materials from waste printed circuit boards (WPCBs) is quite difficult because WPCBs is a heterogeneous mixture of polymer materials, glass fibers, and metals. In this study, WPCBs was treated using ionic liquid (1-ethyl-3-methylimizadolium tetrafluoroborate [EMIM+][BF4-]). Experimental results showed that the separation of the solders went to completion, and electronic components (ECs) were removed in WPCBs when [EMIM+][BF4-] solution containing WPCBs was heated to 240 °C. Meanwhile, metallographic observations verified that the WPCBs had an initial delamination. When the temperature increased to 260 °C, the separation of the WPCBs went to completion, and coppers and glass fibers were obtained. The used [EMIM+][BF4-] was treated by water to generate a solid-liquid suspension, which was separated completely to obtain solid residues by filtration. Thermal analyses combined with infrared ray spectra (IR) observed that the solid residues were bromine epoxy resins. NMR (nuclear magnetic resonance) showed that hydrogen bond played an important role for [EMIM+][BF4-] dissolving bromine epoxy resins. This clean and non-polluting technology offers a new way to recycle valuable materials from WPCBs and prevent environmental pollution from WPCBs effectively. Crown Copyright © 2012. Published by Elsevier B.V. All rights reserved.

  15. Managing tight-binding receptors for new separations technologies. Annual progress report, September 15, 1996 - June 10, 1997

    International Nuclear Information System (INIS)

    Busch, D.H.; Givens, R.S.

    1997-01-01

    'This program is fully staffed and all proposed investigations are proceeding as outlined in the Task Schedule of the original proposal. The program aims remain unchanged and excellent progress is reported below. The authors anticipate no substantial unexpended funds from the first year''s budget at the end of the first year of support. Any such remaining funds will certainly be less than 10% of the budget; less than 5% is expected. Three projects make up this program and each focuses on a single aspect of the major problem of overcoming the inherent slow reaction rates of tight-binding ligands. In a logical order, Project 1 addresses the rates of formation of metal complexes using tight-binding ligands; Project 2 addresses the rate of release of metal ions from complexes with tight-binding ligands; and Project 3 provides the possibility of a new technology that should be unimpeded by the inherent dilatory rates.'

  16. Managing tight-binding receptors for new separations technologies. Annual progress report, September 15, 1996--June 10, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Busch, D.H.; Givens, R.S.

    1997-01-01

    'This program is fully staffed and all proposed investigations are proceeding as outlined in the Task Schedule of the original proposal. The program aims remain unchanged and excellent progress is reported below. The authors anticipate no substantial unexpended funds from the first year''s budget at the end of the first year of support. Any such remaining funds will certainly be less than 10% of the budget; less than 5% is expected. Three projects make up this program and each focuses on a single aspect of the major problem of overcoming the inherent slow reaction rates of tight-binding ligands. In a logical order, Project 1 addresses the rates of formation of metal complexes using tight-binding ligands; Project 2 addresses the rate of release of metal ions from complexes with tight-binding ligands; and Project 3 provides the possibility of a new technology that should be unimpeded by the inherent dilatory rates.'

  17. FY1998 research report on the R and D on high- temperature CO{sub 2} separation, recovery and recycling technologies; 1998 nendo nisanka tanso koon bunri kaishu sairiyo gijutsu kekyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This project aims to develop high-temperature (over 300 degrees C) CO{sub 2} separation, recovery and recycling technologies. For separation membranes, control technology of micro-pore structure using templates, and that of a permeation gas affinity by metal ion exchange and metallic element addition to separation membrane textures were developed. The result gave the guide to control, design and evaluation of permeation and separation properties. The prototype module was prepared, and improvement of joining technology and evaluation of material fatigue property were also carried out. As for optimization of the developed system and research on its marketability, study was mainly made on the ripple effect of inorganic membranes. The current state and trend of technologies were studied also for power plants. In the concept design of the module, further study was made on high-temperature sealing technology and inorganic membrane technology for H{sub 2} gas separation. Use of CO{sub 2} gas separation technology for steelmaking process was newly studied. The ripple effect was studied for future important fields. (NEDO)

  18. Geothermal Energy: Current abstracts

    Energy Technology Data Exchange (ETDEWEB)

    Ringe, A.C. (ed.)

    1988-02-01

    This bulletin announces the current worldwide information available on the technologies required for economic recovery of geothermal energy and its use as direct heat or for electric power production. (ACR)

  19. Compilation of Theses Abstracts

    National Research Council Canada - National Science Library

    2005-01-01

    ... the Internet. The Internet, however, was conceived in the minds of government employees. Just as government influenced the development of the Internet, the same can be said of Radio Frequency Identification (RFID) Technology...

  20. EBS Radionuclide Transport Abstraction

    International Nuclear Information System (INIS)

    J. Prouty

    2006-01-01

    The purpose of this report is to develop and analyze the engineered barrier system (EBS) radionuclide transport abstraction model, consistent with Level I and Level II model validation, as identified in Technical Work Plan for: Near-Field Environment and Transport: Engineered Barrier System: Radionuclide Transport Abstraction Model Report Integration (BSC 2005 [DIRS 173617]). The EBS radionuclide transport abstraction (or EBS RT Abstraction) is the conceptual model used in the total system performance assessment (TSPA) to determine the rate of radionuclide releases from the EBS to the unsaturated zone (UZ). The EBS RT Abstraction conceptual model consists of two main components: a flow model and a transport model. Both models are developed mathematically from first principles in order to show explicitly what assumptions, simplifications, and approximations are incorporated into the models used in the TSPA. The flow model defines the pathways for water flow in the EBS and specifies how the flow rate is computed in each pathway. Input to this model includes the seepage flux into a drift. The seepage flux is potentially split by the drip shield, with some (or all) of the flux being diverted by the drip shield and some passing through breaches in the drip shield that might result from corrosion or seismic damage. The flux through drip shield breaches is potentially split by the waste package, with some (or all) of the flux being diverted by the waste package and some passing through waste package breaches that might result from corrosion or seismic damage. Neither the drip shield nor the waste package survives an igneous intrusion, so the flux splitting submodel is not used in the igneous scenario class. The flow model is validated in an independent model validation technical review. The drip shield and waste package flux splitting algorithms are developed and validated using experimental data. The transport model considers advective transport and diffusive transport

  1. EBS Radionuclide Transport Abstraction

    Energy Technology Data Exchange (ETDEWEB)

    J. Prouty

    2006-07-14

    The purpose of this report is to develop and analyze the engineered barrier system (EBS) radionuclide transport abstraction model, consistent with Level I and Level II model validation, as identified in Technical Work Plan for: Near-Field Environment and Transport: Engineered Barrier System: Radionuclide Transport Abstraction Model Report Integration (BSC 2005 [DIRS 173617]). The EBS radionuclide transport abstraction (or EBS RT Abstraction) is the conceptual model used in the total system performance assessment (TSPA) to determine the rate of radionuclide releases from the EBS to the unsaturated zone (UZ). The EBS RT Abstraction conceptual model consists of two main components: a flow model and a transport model. Both models are developed mathematically from first principles in order to show explicitly what assumptions, simplifications, and approximations are incorporated into the models used in the TSPA. The flow model defines the pathways for water flow in the EBS and specifies how the flow rate is computed in each pathway. Input to this model includes the seepage flux into a drift. The seepage flux is potentially split by the drip shield, with some (or all) of the flux being diverted by the drip shield and some passing through breaches in the drip shield that might result from corrosion or seismic damage. The flux through drip shield breaches is potentially split by the waste package, with some (or all) of the flux being diverted by the waste package and some passing through waste package breaches that might result from corrosion or seismic damage. Neither the drip shield nor the waste package survives an igneous intrusion, so the flux splitting submodel is not used in the igneous scenario class. The flow model is validated in an independent model validation technical review. The drip shield and waste package flux splitting algorithms are developed and validated using experimental data. The transport model considers advective transport and diffusive transport

  2. Reconstruction of abstract quantum theory

    International Nuclear Information System (INIS)

    Drieschner, M.; Goernitz, T.; von Weizsaecker, C.F.

    1988-01-01

    Understanding quantum theory as a general theory of prediction, we reconstruct abstract quantum theory. Abstract means the general frame of quantum theory, without reference to a three-dimensional position space, to concepts like particle or field, or to special laws of dynamics. Reconstruction is the attempt to do this by formulating simple and plausible postulates on prediction in order to derive the basic concepts of quantum theory from them. Thereby no law of classical physics is presupposed which would then have to be quantized. We briefly discuss the relationship of theory and interpretation in physics and the fundamental role of time as a basic concept for physics. Then a number of assertions are given, formulated as succinctly as possible in order to make them easily quotable and comparable. The assertations are arranged in four groups: heuristic principles, verbal definitions of some terms, three basic postulates, and consequences. The three postulates of separable alternatives, indeterminism, and kinematics are the central points of this work. These brief assertions are commented upon, and their relationship with the interpretation of quantum theory is discussed. Also given are an outlook on the further development into concrete quantum theory and some philosophical reflections

  3. Status of the Development of In-Tank/At-Tank Separations Technologies for High-Level Waste Processing for the U.S. Department of Energy

    Energy Technology Data Exchange (ETDEWEB)

    Wilmarth, William R.; Machara, N.; Peterson, Reid A.; Bush, Sheryl R.

    2011-10-01

    Within the U.S. Department of Energy’s (DOE) Office of Technology Innovation and Development, the Office of Waste Processing manages a research and development program related to the treatment and disposition of radioactive waste. At the Savannah River (South Carolina) and Hanford (Washington) Sites, approximately 90 million gallons of waste are distributed among 226 storage tanks (grouped or collocated in “tank farms”). This waste may be considered to contain mixed and stratified high activity and low activity constituent waste liquids, salts and sludges that are collectively managed as high level waste (HLW). A large majority of these wastes and associated facilities are unique to the DOE, meaning many of the programs to treat these materials are “first-of-a-kind” and unprecedented in scope and complexity. As a result, the technologies required to disposition these wastes must be developed from basic principles, or require significant re-engineering to adapt to DOE’s specific applications. Of particular interest recently, the development of In-tank or At-Tank separation processes have the potential to treat waste with high returns on financial investment. The primary objective associated with In-Tank or At-Tank separation processes is to accelerate waste processing. Insertion of the technologies will (1) maximize available tank space to efficiently support permanent waste disposition including vitrification; (2) treat problematic waste prior to transfer to the primary processing facilities at either site (i.e., Hanford’s Waste Treatment and Immobilization Plant (WTP) or Savannah River’s Salt Waste Processing Facility (SWPF)); and (3) create a parallel treatment process to shorten the overall treatment duration.

  4. Correlations and fluctuations '98. Collected abstracts

    International Nuclear Information System (INIS)

    Csoergoe, T.; Hegyi, S.; Hwa, R.C.; Jancso, G.

    1998-01-01

    The proceedings of the 8. International workshop on multiparticle production contains the abstracts of papers on various topics of correlations and fluctuations. Hydrodynamic models, Bose-Einstein correlations, hadron-hadron interactions, heavy ion reactions are discussed in detail. 54 items are indexed separately for the INIS database. (K.A.)

  5. Compilation of Theses Abstracts

    Science.gov (United States)

    2005-06-01

    Infrastructure, Cost Estimate, Photovoltaic Power Conversion, PVPC, Solar PV System, Vines, MPPT A STUDY ON PERFORMANCE BASED LOGISTICS...state of low voltage power storage devices may enable practical Pulse Forming Inductive Network power supplies to be developed if a suitable current...analyzed by three separate comparator banks, the outputs of which are used to determine a digital representation of the analog signal. This design

  6. CO2 CAPTURE PROJECT-AN INTEGRATED, COLLABORATIVE TECHNOLOGY DEVELOPMENT PROJECT FOR NEXT GENERATION CO2 SEPARATION, CAPTURE AND GEOLOGIC SEQUESTRATION

    Energy Technology Data Exchange (ETDEWEB)

    Helen Kerr

    2004-04-01

    The CO{sub 2} Capture Project (CCP) is a joint industry project, funded by eight energy companies (BP, ChevronTexaco, EnCana, Eni, Norsk Hydro, Shell, Statoil, and Suncor) and three government agencies (European Union (DG Res & DG Tren), Norway (Klimatek) and the U.S.A. (Department of Energy)). The project objective is to develop new technologies, which could reduce the cost of CO{sub 2} capture and geologic storage by 50% for retrofit to existing plants and 75% for new-build plants. Technologies are to be developed to ''proof of concept'' stage by the end of 2003. The project budget is approximately $24 million over 3 years and the work program is divided into eight major activity areas: (1) Baseline Design and Cost Estimation--defined the uncontrolled emissions from each facility and estimate the cost of abatement in $/tonne CO{sub 2}. (2) Capture Technology, Post Combustion--technologies, which can remove CO{sub 2} from exhaust gases after combustion. (3) Capture Technology, Oxyfuel--where oxygen is separated from the air and then burned with hydrocarbons to produce an exhaust with wet high concentrations of CO{sub 2} for storage. (4) Capture Technology, Pre-Combustion--in which, natural gas and petroleum coke are converted to hydrogen and CO{sub 2} in a reformer/gasifier. (5) Common Economic Model/Technology Screening--analysis and evaluation of each technology applied to the scenarios to provide meaningful and consistent comparison. (6) New Technology Cost Estimation: on a consistent basis with the baseline above, to demonstrate cost reductions. (7) Geologic Storage, Monitoring and Verification (SMV)--providing assurance that CO{sub 2} can be safely stored in geologic formations over the long term. (8) Non-Technical: project management, communication of results and a review of current policies and incentives governing CO{sub 2} capture and storage. Technology development work dominated the past six months of the project. Numerous studies

  7. CO2 Capture Project-An Integrated, Collaborative Technology Development Project for Next Generation CO2 Separation, Capture and Geologic Sequestration

    Energy Technology Data Exchange (ETDEWEB)

    Helen Kerr; Linda M. Curran

    2005-04-15

    The CO{sub 2} Capture Project (CCP) was a joint industry project, funded by eight energy companies (BP, ChevronTexaco, EnCana, ENI, Norsk Hydro, Shell, Statoil, and Suncor) and three government agencies (European Union [DG RES & DG TREN], the Norwegian Research Council [Klimatek Program] and the U.S. Department of Energy [NETL]). The project objective was to develop new technologies that could reduce the cost of CO{sub 2} capture and geologic storage by 50% for retrofit to existing plants and 75% for new-build plants. Technologies were to be developed to ''proof of concept'' stage by the end of 2003. Certain promising technology areas were increased in scope and the studies extended through 2004. The project budget was approximately $26.4 million over 4 years and the work program is divided into eight major activity areas: Baseline Design and Cost Estimation--defined the uncontrolled emissions from each facility and estimate the cost of abatement in $/tonne CO{sub 2}. Capture Technology, Post Combustion: technologies, which can remove CO{sub 2} from exhaust gases after combustion. Capture Technology, Oxyfuel: where oxygen is separated from the air and then burned with hydrocarbons to produce an exhaust with high CO{sub 2} for storage. Capture Technology, Pre-Combustion: in which, natural gas and petroleum cokes are converted to hydrogen and CO{sub 2} in a reformer/gasifier. Common Economic Model/Technology Screening: analysis and evaluation of each technology applied to the scenarios to provide meaningful and consistent comparison. New Technology Cost Estimation: on a consistent basis with the baseline above, to demonstrate cost reductions. Geologic Storage, Monitoring and Verification (SMV): providing assurance that CO{sub 2} can be safely stored in geologic formations over the long term. Non-Technical: project management, communication of results and a review of current policies and incentives governing CO{sub 2} capture and storage. Pre

  8. Program and abstracts

    International Nuclear Information System (INIS)

    1978-01-01

    This volume contains the program and abstracts of the conference. The following topics are included: metal vapor molecular lasers, magnetohydrodynamics, rare gas halide and nuclear pumped lasers, transfer mechanisms in arcs, kinetic processes in rare gas halide lasers, arcs and flows, XeF kinetics and lasers, fundamental processes in excimer lasers, electrode effects and vacuum arcs, electron and ion transport, ion interactions and mobilities, glow discharges, diagnostics and afterglows, dissociative recombination, electron ionization and excitation, rare gas excimers and group VI lasers, breakdown, novel laser pumping techniques, electrode-related discharge phenomena, photon interactions, attachment, plasma chemistry and infrared lasers, electron scattering, and reactions of excited species

  9. ESPR 2015. Abstracts

    International Nuclear Information System (INIS)

    2015-01-01

    The volume includes the abstracts of the ESPR 2015 covering the following topics: PCG (post graduate courses): Radiography; fluoroscopy and general issue; nuclear medicine, interventional radiology and hybrid imaging, pediatric CT, pediatric ultrasound; MRI in childhood. Scientific sessions and task force sessions: International aspects; neuroradiology, neonatal imaging, engineering techniques to simulate injury in child abuse, CT - dose and quality, challenges in the chest, cardiovascular and chest, muscoskeletal, oncology, pediatric uroradiology and abdominal imaging, fetal and postmortem imaging, education and global challenges, neuroradiology - head and neck, gastrointestinal and genitourinary.

  10. ESPR 2015. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-05-10

    The volume includes the abstracts of the ESPR 2015 covering the following topics: PCG (post graduate courses): Radiography; fluoroscopy and general issue; nuclear medicine, interventional radiology and hybrid imaging, pediatric CT, pediatric ultrasound; MRI in childhood. Scientific sessions and task force sessions: International aspects; neuroradiology, neonatal imaging, engineering techniques to simulate injury in child abuse, CT - dose and quality, challenges in the chest, cardiovascular and chest, muscoskeletal, oncology, pediatric uroradiology and abdominal imaging, fetal and postmortem imaging, education and global challenges, neuroradiology - head and neck, gastrointestinal and genitourinary.

  11. SPR 2017. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2017-05-15

    The conference proceedings SPR 2017 include abstracts on the following issues: gastrointestinal radiography - inflammatory bowel diseases, cardiovascular CTA, general muscoskeletal radiology, muscoskeletal congenital development diseases, general pediatric radiology - chest, muscoskeletal imaging - marrow and infectious disorders, state-of-the-art body MR imaging, practical pediatric sonography, quality and professionalism, CT imaging in congenital heart diseases, radiographic courses, body MT techniques, contrast enhanced ultrasound, machine learning, forensic imaging, the radiation dos conundrum - reconciling imaging, imagining and managing, the practice of radiology, interventional radiology, neuroradiology, PET/MR.

  12. Beyond the abstractions?

    DEFF Research Database (Denmark)

    Olesen, Henning Salling

    2006-01-01

      The anniversary of the International Journal of Lifelong Education takes place in the middle of a conceptual landslide from lifelong education to lifelong learning. Contemporary discourses of lifelong learning etc are however abstractions behind which new functions and agendas for adult education...... are set. The ideological discourse of recent policies seems to neglect the fact that history and resources for lifelong learning are different across Europe, and also neglects the multiplicity of adult learners. Instead of refusing the new agendas, however, adult education research should try to dissolve...... learning. Adult education research must fulfil it's potential conversion from normative philosophy to critical and empirical social science....

  13. STATUS OF THE DEVELOPMENT OF IN-TANK/AT-TANK SEPARATIONS TECHNOLOGIES FOR FOR HIGH-LEVEL WASTE PROCESSING FOR THE U.S. DEPARTMENT OF ENERGY

    Energy Technology Data Exchange (ETDEWEB)

    Aaron, G.; Wilmarth, B.

    2011-09-19

    Within the U.S. Department of Energy's (DOE) Office of Technology Innovation and Development, the Office of Waste Processing manages a research and development program related to the treatment and disposition of radioactive waste. At the Savannah River (South Carolina) and Hanford (Washington) Sites, approximately 90 million gallons of waste are distributed among 226 storage tanks (grouped or collocated in 'tank farms'). This waste may be considered to contain mixed and stratified high activity and low activity constituent waste liquids, salts and sludges that are collectively managed as high level waste (HLW). A large majority of these wastes and associated facilities are unique to the DOE, meaning many of the programs to treat these materials are 'first-of-a-kind' and unprecedented in scope and complexity. As a result, the technologies required to disposition these wastes must be developed from basic principles, or require significant re-engineering to adapt to DOE's specific applications. Of particular interest recently, the development of In-tank or At-Tank separation processes have the potential to treat waste with high returns on financial investment. The primary objective associated with In-Tank or At-Tank separation processes is to accelerate waste processing. Insertion of the technologies will (1) maximize available tank space to efficiently support permanent waste disposition including vitrification; (2) treat problematic waste prior to transfer to the primary processing facilities at either site (i.e., Hanford's Waste Treatment and Immobilization Plant (WTP) or Savannah River's Salt Waste Processing Facility (SWPF)); and (3) create a parallel treatment process to shorten the overall treatment duration. This paper will review the status of several of the R&D projects being developed by the U.S. DOE including insertion of the ion exchange (IX) technologies, such as Small Column Ion Exchange (SCIX) at Savannah River

  14. Status Of The Development Of In-Tank/At-Tank Separations Technologies For High-Level Waste Processing For The U.S. Department Of Energy

    International Nuclear Information System (INIS)

    Aaron, G.; Wilmarth, B.

    2011-01-01

    Within the U.S. Department of Energy's (DOE) Office of Technology Innovation and Development, the Office of Waste Processing manages a research and development program related to the treatment and disposition of radioactive waste. At the Savannah River (South Carolina) and Hanford (Washington) Sites, approximately 90 million gallons of waste are distributed among 226 storage tanks (grouped or collocated in 'tank farms'). This waste may be considered to contain mixed and stratified high activity and low activity constituent waste liquids, salts and sludges that are collectively managed as high level waste (HLW). A large majority of these wastes and associated facilities are unique to the DOE, meaning many of the programs to treat these materials are 'first-of-a-kind' and unprecedented in scope and complexity. As a result, the technologies required to disposition these wastes must be developed from basic principles, or require significant re-engineering to adapt to DOE's specific applications. Of particular interest recently, the development of In-tank or At-Tank separation processes have the potential to treat waste with high returns on financial investment. The primary objective associated with In-Tank or At-Tank separation processes is to accelerate waste processing. Insertion of the technologies will (1) maximize available tank space to efficiently support permanent waste disposition including vitrification; (2) treat problematic waste prior to transfer to the primary processing facilities at either site (i.e., Hanford's Waste Treatment and Immobilization Plant (WTP) or Savannah River's Salt Waste Processing Facility (SWPF)); and (3) create a parallel treatment process to shorten the overall treatment duration. This paper will review the status of several of the R and D projects being developed by the U.S. DOE including insertion of the ion exchange (IX) technologies, such as Small Column Ion Exchange (SCIX) at Savannah River. This has the potential to align the

  15. EBS Radionuclide Transport Abstraction

    Energy Technology Data Exchange (ETDEWEB)

    J.D. Schreiber

    2005-08-25

    The purpose of this report is to develop and analyze the engineered barrier system (EBS) radionuclide transport abstraction model, consistent with Level I and Level II model validation, as identified in ''Technical Work Plan for: Near-Field Environment and Transport: Engineered Barrier System: Radionuclide Transport Abstraction Model Report Integration'' (BSC 2005 [DIRS 173617]). The EBS radionuclide transport abstraction (or EBS RT Abstraction) is the conceptual model used in the total system performance assessment for the license application (TSPA-LA) to determine the rate of radionuclide releases from the EBS to the unsaturated zone (UZ). The EBS RT Abstraction conceptual model consists of two main components: a flow model and a transport model. Both models are developed mathematically from first principles in order to show explicitly what assumptions, simplifications, and approximations are incorporated into the models used in the TSPA-LA. The flow model defines the pathways for water flow in the EBS and specifies how the flow rate is computed in each pathway. Input to this model includes the seepage flux into a drift. The seepage flux is potentially split by the drip shield, with some (or all) of the flux being diverted by the drip shield and some passing through breaches in the drip shield that might result from corrosion or seismic damage. The flux through drip shield breaches is potentially split by the waste package, with some (or all) of the flux being diverted by the waste package and some passing through waste package breaches that might result from corrosion or seismic damage. Neither the drip shield nor the waste package survives an igneous intrusion, so the flux splitting submodel is not used in the igneous scenario class. The flow model is validated in an independent model validation technical review. The drip shield and waste package flux splitting algorithms are developed and validated using experimental data. The transport

  16. EBS Radionuclide Transport Abstraction

    International Nuclear Information System (INIS)

    J.D. Schreiber

    2005-01-01

    The purpose of this report is to develop and analyze the engineered barrier system (EBS) radionuclide transport abstraction model, consistent with Level I and Level II model validation, as identified in ''Technical Work Plan for: Near-Field Environment and Transport: Engineered Barrier System: Radionuclide Transport Abstraction Model Report Integration'' (BSC 2005 [DIRS 173617]). The EBS radionuclide transport abstraction (or EBS RT Abstraction) is the conceptual model used in the total system performance assessment for the license application (TSPA-LA) to determine the rate of radionuclide releases from the EBS to the unsaturated zone (UZ). The EBS RT Abstraction conceptual model consists of two main components: a flow model and a transport model. Both models are developed mathematically from first principles in order to show explicitly what assumptions, simplifications, and approximations are incorporated into the models used in the TSPA-LA. The flow model defines the pathways for water flow in the EBS and specifies how the flow rate is computed in each pathway. Input to this model includes the seepage flux into a drift. The seepage flux is potentially split by the drip shield, with some (or all) of the flux being diverted by the drip shield and some passing through breaches in the drip shield that might result from corrosion or seismic damage. The flux through drip shield breaches is potentially split by the waste package, with some (or all) of the flux being diverted by the waste package and some passing through waste package breaches that might result from corrosion or seismic damage. Neither the drip shield nor the waste package survives an igneous intrusion, so the flux splitting submodel is not used in the igneous scenario class. The flow model is validated in an independent model validation technical review. The drip shield and waste package flux splitting algorithms are developed and validated using experimental data. The transport model considers

  17. Analysis of complex networks using aggressive abstraction.

    Energy Technology Data Exchange (ETDEWEB)

    Colbaugh, Richard; Glass, Kristin.; Willard, Gerald

    2008-10-01

    This paper presents a new methodology for analyzing complex networks in which the network of interest is first abstracted to a much simpler (but equivalent) representation, the required analysis is performed using the abstraction, and analytic conclusions are then mapped back to the original network and interpreted there. We begin by identifying a broad and important class of complex networks which admit abstractions that are simultaneously dramatically simplifying and property preserving we call these aggressive abstractions -- and which can therefore be analyzed using the proposed approach. We then introduce and develop two forms of aggressive abstraction: 1.) finite state abstraction, in which dynamical networks with uncountable state spaces are modeled using finite state systems, and 2.) onedimensional abstraction, whereby high dimensional network dynamics are captured in a meaningful way using a single scalar variable. In each case, the property preserving nature of the abstraction process is rigorously established and efficient algorithms are presented for computing the abstraction. The considerable potential of the proposed approach to complex networks analysis is illustrated through case studies involving vulnerability analysis of technological networks and predictive analysis for social processes.

  18. Abstracts for student symposium

    Energy Technology Data Exchange (ETDEWEB)

    Goldman, B.

    1994-04-01

    Lawrence Livermore National Laboratory Science and Engineering Research Semester (SERS) students are participants in a national program sponsored by the DOE Office of Energy Research. Presented topics from Fall 1993 include: Laser glass, wiring codes, lead in food and food containers, chromium removal from ground water, fiber optic sensors for ph measurement, CFC replacement, predator/prey simulation, detection of micronuclei in germ cells, DNA conformation, stimulated brillouin scattering, DNA sequencing, evaluation of education programs, neural network analysis of nuclear glass, lithium ion batteries, Indonesian snails, optical switching systems, and photoreceiver design. Individual papers are indexed separately on the Energy Data Base.

  19. 2002 Conference Programme and Book of Abstracts

    International Nuclear Information System (INIS)

    2002-01-01

    The 25th Annual (Silver Jubilee) Conference 2002 Conference Programme and Book of Abstracts gives a brief on the Nigerian Institute of Physics, the Sheda Science and Technology Complex. It carries the Conference programme and carries the abstracts of all the papers presented. The abstracts cover a wide range of subjects including topics in atmospheric physics, education, policy and planning, geophysics, instrumentation, mathematical sciences, theoretical physics, nuclear and health physics, solid state, electronic and health physics. We are grateful to the Nigerian Institute of Physics for this volume

  20. Problems in abstract algebra

    CERN Document Server

    Wadsworth, A R

    2017-01-01

    This is a book of problems in abstract algebra for strong undergraduates or beginning graduate students. It can be used as a supplement to a course or for self-study. The book provides more variety and more challenging problems than are found in most algebra textbooks. It is intended for students wanting to enrich their learning of mathematics by tackling problems that take some thought and effort to solve. The book contains problems on groups (including the Sylow Theorems, solvable groups, presentation of groups by generators and relations, and structure and duality for finite abelian groups); rings (including basic ideal theory and factorization in integral domains and Gauss's Theorem); linear algebra (emphasizing linear transformations, including canonical forms); and fields (including Galois theory). Hints to many problems are also included.

  1. Management strategies on the industrialization road of state-of-the-art technologies for e-waste recycling: the case study of electrostatic separation--a review.

    Science.gov (United States)

    Xue, Mianqiang; Li, Jia; Xu, Zhenming

    2013-02-01

    Electronic waste (e-waste) management is pressing as global production has increased significantly in the past few years and is rising continuously at a fast rate. Many countries are facing hazardous e-waste mountains, most of which are disposed of by backyard recyclers, creating serious threats to public health and ecosystems. Industrialization of state-of-the-art recycling technologies is imperative to enhance the comprehensive utilization of resources and to protect the environment. This article aims to provide an overview of management strategies solving the crucial problems during the process of industrialization. A typical case study of electrostatic separation for recycling waste printed circuit boards was discussed in terms of parameters optimization, materials flow control, noise assessment, risk assessment, economic evaluation and social benefits analysis. The comprehensive view provided by the review could be helpful to the progress of the e-waste recycling industry.

  2. [Near-infrared spectroscopy technology for online monitoring of the column separation and purification process of active components of Centella asiatica L. Urban].

    Science.gov (United States)

    Liu, Hua; Ye, Xiao-Lan; Yang, Guang; Qi, Yun-Peng; Fan, Guo-Rong

    2013-01-01

    The present paper is to study and develop a method for online monitoring of the column separation and purification process of active components that are madecassoside and asiaticoside of Centella asiatica L. Urban using near-infrared (NIR) spectroscopy technology. After collecting 50%-ethanol eluant, we detected their NIR spectra and developed the high performance liquid chromatography (HPLC) assay method of active components. Then, partial least square (PLS) was used to develop linear correlation between their NIR spectra and contents. During modeling, correlation coefficient (R2) and root mean square errors of cross-validation (RMSECV) were regarded as the indexes to select optimal wavenumbers and preprocessing methods. The optimal wavenumbers of madecassoside and asiaticoside were in the range of 12 000.8-7 499.8 cm(-1) and 12 000.8-9 750.3 cm(-1), respectively; R2 were 96.44 and 96.07, respectively, and RMSECV were 0.084 80 and 0.000 99, respectively. The above developed model was used for online monitoring of the contents of madecassoside and asiaticoside during the column separation and purification process of Centella asiatica L. Urban. The predicted results were satisfactory. This method was proved to be fast, convenient and precise. It can be used in online monitoring and quality control of the manufacturing of madecassoside and asiaticoside.

  3. Status of the development of in-tank/at-tank separations technologies for high-level waste processing for the U.S. Department Of Energy - 59109

    International Nuclear Information System (INIS)

    Wilmarth, William R.; Bush, Sheryl R.; Machara, Nicholas P.; Peterson, Reid A.

    2012-01-01

    Within the U.S. Department of Energy's (DOE) Office of Technology Innovation and Development, the Office of Waste Processing manages a research and development program related to the treatment and disposition of radioactive waste. At the Savannah River (South Carolina) and Hanford (Washington) Sites, approximately 90 million gallons of waste are distributed among 226 storage tanks (grouped or collocated in 'tank farms'). This waste may be considered to contain mixed and stratified high activity and low activity constituent waste liquids, salts and sludges that are collectively managed as high level waste (HLW). A large majority of these wastes and associated facilities are unique to the DOE, meaning many of the programs to treat these materials are 'first-of-a-kind' and unprecedented in scope and complexity. As a result, the technologies required to disposition these wastes must be developed from basic principles, or require significant re-engineering to adapt to DOE's specific applications. Of particular interest recently, the development of In-tank or At- Tank separation processes have the potential to treat waste with high returns on financial investment. The primary objective associated with In-Tank or At-Tank separation processes is to accelerate waste processing. Insertion of the technologies will (1) maximize available tank space to efficiently support permanent waste disposition including vitrification; (2) treat problematic waste prior to transfer to the primary processing facilities at either site (i.e., Hanford's Waste Treatment and Immobilization Plant (WTP) or Savannah River's Salt Waste Processing Facility (SWPF)); and (3) create a parallel treatment process to shorten the overall treatment duration. This paper will review the status of several of the R and D projects being developed by the U.S. DOE including insertion of the ion exchange (IX) technologies, such as Small Column Ion Exchange (SCIX) at Savannah River. This has the potential to align the

  4. SELECTIVE SEPARATION, PRECONCENTRATION AND ...

    African Journals Online (AJOL)

    B. S. Chandravanshi

    ABSTRACT. A simple, sensitive, facile and low cost methodology, combined with flame atomic absorption spectrometry (FAAS), was employed to evaluate the selective separation and preconcentration of Pd(II) ions in environmental samples by using a triazole derivative as an organic coprecipitating agent without a carrier ...

  5. Isotope separation

    International Nuclear Information System (INIS)

    Ravoire, Jean

    1978-11-01

    Separation of isotopes is treated in a general way, with special reference to the production of enriched uranium. Uses of separated isotopes are presented quickly. Then basic definitions and theoretical concepts are explained: isotopic effects, non statistical and statistical processes, reversible and irreversible processes, separation factor, enrichment, cascades, isotopic separative work, thermodynamics. Afterwards the main processes and productions are reviewed. Finally the economical and industrial aspects of uranium enrichment are resumed [fr

  6. 14th National Conference on Physics. Abstracts. Volume 2

    International Nuclear Information System (INIS)

    Calboreanu, Alexandru; Grecu, Dan

    2005-01-01

    The National Conference on Physics 2005, is dedicated to 'The International Year of Physics' by the scientific community of physicists in Romania. Within the frame of this 'Festival of Physics', The First Symposium on Technical Physics and Physical Engineering' TPPE 2005, was organized as a satellite event at the Polytechnic University of Bucharest. As it is well known, the contributed papers to the National Conference on Physics were structured on chapters, corresponding to 'the sections' of The Romanian Society of Physics, their abstracts being then published in a two volume 'Book of Abstracts'. All the chapters of this book, except the 8th and the 9th, can be found in 'Abstracts Volume I'. According to the topics of the TPPE 2005, these two chapters, namely: 8. Technical Physics and Physical Engineering and 9. Physics and Energy are published separately in the 'Abstracts Volume II', but as it can be seen, the unitary character of the Conference is preserved and developed. The most important topics of this second volume are: optoelectronics; advanced materials and technologies; physics, electronics and electrical engineering; physics and mechanical engineering; physics and chemical engineering; physics, information and computer engineering; physics and industry; physics, biology and medical engineering; renewable energy sources and energy efficiency; nuclear engineering. We present the progress made in physics education concerning: physics teaching in technical education; E-learning and modern methods in physics teaching; physics education in schools and universities, in a special section of the first volume of abstracts. Regarding the essential role of physics in the realizing of a knowledge-based society of the new millennium the strengthening of the relationship between researchers and academics becomes thus the main message of this scientific meeting. (P.S.)

  7. SENSE 2010, Abstracts

    International Nuclear Information System (INIS)

    Lumsden, M.D.; Argyriou, D.N.; Inosov, D.

    2012-01-01

    The microscopic origin of unconventional superconductivity continues to attract the attention of the condensed matter community. Whereas rare-earth / actinide-based intermetallic and copper oxide-based high temperature superconductors are studied for more than twenty years, the iron-based superconductors have been in the focus of interest since their recent discovery. Inelastic neutron scattering experiments have been of particular importance for the understanding of the magnetic and superconducting properties of these compounds. With its 29 talks and 14 posters the workshop provided a forum for the 71 registered participants to review and discuss experimental achievements, recognize the observed synergy and differences as well as discuss theoretical efforts to identify the symmetry of the superconducting order parameter in addition to the coupling mechanisms of the Cooper pairs. The workshop covered different topics relevant for the study of unconventional superconductivity. Magnetization and lattice dynamics such as spin resonances, phonons, magnetic and other excitations as studied by spectroscopic methods were presented. Investigations of (doping, pressure and magnetic field dependent) phase diagrams, electronic states as well as vortex physics by the various diffraction techniques were also addressed. This document gathers only the abstracts of the papers. (authors)

  8. Automated Supernova Discovery (Abstract)

    Science.gov (United States)

    Post, R. S.

    2015-12-01

    (Abstract only) We are developing a system of robotic telescopes for automatic recognition of Supernovas as well as other transient events in collaboration with the Puckett Supernova Search Team. At the SAS2014 meeting, the discovery program, SNARE, was first described. Since then, it has been continuously improved to handle searches under a wide variety of atmospheric conditions. Currently, two telescopes are used to build a reference library while searching for PSN with a partial library. Since data is taken every night without clouds, we must deal with varying atmospheric and high background illumination from the moon. Software is configured to identify a PSN, reshoot for verification with options to change the run plan to acquire photometric or spectrographic data. The telescopes are 24-inch CDK24, with Alta U230 cameras, one in CA and one in NM. Images and run plans are sent between sites so the CA telescope can search while photometry is done in NM. Our goal is to find bright PSNs with magnitude 17.5 or less which is the limit of our planned spectroscopy. We present results from our first automated PSN discoveries and plans for PSN data acquisition.

  9. Symposium proceedings: environmental aspects of fuel conversion technology, II, December 1975, Hollywood, Florida. [34 papers

    Energy Technology Data Exchange (ETDEWEB)

    Ayer, F.A. (comp.)

    1976-06-01

    The report covers EPA's second symposium on the environmental aspects of fuel conversion technology. Its main objective was to review and discuss environmentally related information in the field of fuel conversion technology. Specific topics were environmental problem definition, process technology, control technology, and process measurements. Thirty-four papers were abstracted and indexed separately.

  10. ABSTRACT MODELS FOR SYSTEM VIRTUALIZATION

    Directory of Open Access Journals (Sweden)

    M. G. Koveshnikov

    2015-05-01

    Full Text Available The paper is dedicated to issues of system objects securing (system files and user system or application configuration files against unauthorized access including denial of service attacks. We have suggested the method and developed abstract system virtualization models, which are used toresearch attack scenarios for different virtualization modes. Estimation for system tools virtualization technology effectiveness is given. Suggested technology is based on redirection of access requests to system objects shared among access subjects. Whole and partial system virtualization modes have been modeled. The difference between them is the following: in the whole virtualization mode all copies of access system objects are created whereon subjects’ requests are redirected including corresponding application objects;in the partial virtualization mode corresponding copies are created only for part of a system, for example, only system objects for applications. Alternative solutions effectiveness is valued relating to different attack scenarios. We consider proprietary and approved technical solution which implements system virtualization method for Microsoft Windows OS family. Administrative simplicity and capabilities of correspondingly designed system objects security tools are illustrated on this example. Practical significance of the suggested security method has been confirmed.

  11. Organic separations with membranes

    International Nuclear Information System (INIS)

    Funk, E.W.

    1993-01-01

    This paper presents an overview of present and emerging applications of membrane technology for the separation and purification of organic materials. This technology is highly relevant for programs aimed at minimizing waste in processing and in the treatment of gaseous and liquid effluents. Application of membranes for organic separation is growing rapidly in the petrochemical industry to simplify processing and in the treatment of effluents, and it is expected that this technology will be useful in numerous other industries including the processing of nuclear waste materials

  12. Abstraction of Drift Seepage

    Energy Technology Data Exchange (ETDEWEB)

    J.T. Birkholzer

    2004-11-01

    This model report documents the abstraction of drift seepage, conducted to provide seepage-relevant parameters and their probability distributions for use in Total System Performance Assessment for License Application (TSPA-LA). Drift seepage refers to the flow of liquid water into waste emplacement drifts. Water that seeps into drifts may contact waste packages and potentially mobilize radionuclides, and may result in advective transport of radionuclides through breached waste packages [''Risk Information to Support Prioritization of Performance Assessment Models'' (BSC 2003 [DIRS 168796], Section 3.3.2)]. The unsaturated rock layers overlying and hosting the repository form a natural barrier that reduces the amount of water entering emplacement drifts by natural subsurface processes. For example, drift seepage is limited by the capillary barrier forming at the drift crown, which decreases or even eliminates water flow from the unsaturated fractured rock into the drift. During the first few hundred years after waste emplacement, when above-boiling rock temperatures will develop as a result of heat generated by the decay of the radioactive waste, vaporization of percolation water is an additional factor limiting seepage. Estimating the effectiveness of these natural barrier capabilities and predicting the amount of seepage into drifts is an important aspect of assessing the performance of the repository. The TSPA-LA therefore includes a seepage component that calculates the amount of seepage into drifts [''Total System Performance Assessment (TSPA) Model/Analysis for the License Application'' (BSC 2004 [DIRS 168504], Section 6.3.3.1)]. The TSPA-LA calculation is performed with a probabilistic approach that accounts for the spatial and temporal variability and inherent uncertainty of seepage-relevant properties and processes. Results are used for subsequent TSPA-LA components that may handle, for example, waste package

  13. Book of abstracts

    International Nuclear Information System (INIS)

    1987-01-01

    The document contains abstracts of 24 review papers, 24 invited papers, 24 oral contributions and 120 posters. 10 review papers summarize the status of laser fusion research and progress in high-power laser facilities in major world laboratories. Four papers review research programs (laser-matter interaction studies and X-ray source development) based on KrF laser systems. Other review papers discuss the problems of laser energy conversion into X-rays in laser-heated cavities, X-ray lasing at shorter wavelengths, optimization of targets for inertial fusion. Two review papers are devoted to light ion fusion. The subjects of most invited papers are special problems of current laser plasma research, such as hot electron generation, nonlinear resonance absorption, energy accumulation limits, pellet ignition, conversion of laser light into X-rays, high-pressure plasma generation. Three invited papers review laser plasma research in Czechoslovakia, Poland and Spain. One paper suggests a new method of producing muonic superdense matter. The remaining inivited papers deal with the progress in XUV lasers and with laser plasma applications for further laser development. Of the papers accepted for oral presentation 12 papers discuss various problems of laser-plasma interaction; 4 papers deal with laser targets, 4 papers with laser-initiated X-ray sources, 3 papers with the diagnostics of laser-produced plasma. The last oral contribution presents the main principles of the excimer laser theory. The largest group of posters is related to laser-plasma interaction and energy absorption problems, to laser-target interaction and various methods of laser plasma diagnostics. The other posters deal with plasma applications in laser development, plasma mirrors, Brillouin and Raman scattering, X-ray emission, harmonic generation, electron acceleration, production of high-Z plasmas and other related problems. (J.U.)

  14. Abstraction of Drift Seepage

    International Nuclear Information System (INIS)

    J.T. Birkholzer

    2004-01-01

    This model report documents the abstraction of drift seepage, conducted to provide seepage-relevant parameters and their probability distributions for use in Total System Performance Assessment for License Application (TSPA-LA). Drift seepage refers to the flow of liquid water into waste emplacement drifts. Water that seeps into drifts may contact waste packages and potentially mobilize radionuclides, and may result in advective transport of radionuclides through breached waste packages [''Risk Information to Support Prioritization of Performance Assessment Models'' (BSC 2003 [DIRS 168796], Section 3.3.2)]. The unsaturated rock layers overlying and hosting the repository form a natural barrier that reduces the amount of water entering emplacement drifts by natural subsurface processes. For example, drift seepage is limited by the capillary barrier forming at the drift crown, which decreases or even eliminates water flow from the unsaturated fractured rock into the drift. During the first few hundred years after waste emplacement, when above-boiling rock temperatures will develop as a result of heat generated by the decay of the radioactive waste, vaporization of percolation water is an additional factor limiting seepage. Estimating the effectiveness of these natural barrier capabilities and predicting the amount of seepage into drifts is an important aspect of assessing the performance of the repository. The TSPA-LA therefore includes a seepage component that calculates the amount of seepage into drifts [''Total System Performance Assessment (TSPA) Model/Analysis for the License Application'' (BSC 2004 [DIRS 168504], Section 6.3.3.1)]. The TSPA-LA calculation is performed with a probabilistic approach that accounts for the spatial and temporal variability and inherent uncertainty of seepage-relevant properties and processes. Results are used for subsequent TSPA-LA components that may handle, for example, waste package corrosion or radionuclide transport

  15. Abstract: Body Work

    DEFF Research Database (Denmark)

    Otto, Lene

    2012-01-01

    social and age groups are regarded? In what ways has different practices limited or extended its involvement in the body? Has work been organized hierarchically in relation to the degree of direct body work? What happened when body work became mediated by machines and technology? Has body work as forms......This panel will explore the usefulness of the term ‘body work’ in cultural history. Body work is understood as work focusing on the bodies of others as component in a range of occupations in health and social care, as well as in unpaid work in the family. How can the notion of body work inform...... cultural history of health and illness whether through a micro-social focus on the intercorporeal aspects of work in health and social care, or through clarifying our understanding of the times and spaces of work, or through highlighting the relationship between mundane body work and global processes...

  16. Book of abstracts

    International Nuclear Information System (INIS)

    1996-01-01

    The Philippine Atomic Energy Commission (PAEC), now the Philippine Nuclear Research Institute (PNRI), organized the 1st Philippine Nuclear Congress in 1976 to present the progress of R and D, nuclear S and T services in the applications of nuclear energy, and the nuclear power program. This year 1996 marks the centennial of the discovery of radioactivity and the organizing committee finds it relevant to convene the 2nd Philippine Nuclear Congress with the objectives to review the global/regional/national scenarios in nuclear energy applications; to provide a forum and discussions of the issues and concerns on public acceptance; and to propose policy recommendations to the government towards the role of nuclear science and technology in the 21st century

  17. Clean coal technologies: A business report

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The book contains four sections as follows: (1) Industry trends: US energy supply and demand; The clean coal industry; Opportunities in clean coal technologies; International market for clean coal technologies; and Clean Coal Technology Program, US Energy Department; (2) Environmental policy: Clean Air Act; Midwestern states' coal policy; European Community policy; and R ampersand D in the United Kingdom; (3) Clean coal technologies: Pre-combustion technologies; Combustion technologies; and Post-combustion technologies; (4) Clean coal companies. Separate abstracts have been prepared for several sections or subsections for inclusion on the data base

  18. A Synergistic Combination of Advanced Separation and Chemical Scale Inhibitor Technologies for Efficient Use of Imparied Water As Cooling Water in Coal-based Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Jasbir Gill

    2010-08-30

    Nalco Company is partnering with Argonne National Laboratory (ANL) in this project to jointly develop advanced scale control technologies that will provide cost-effective solutions for coal-based power plants to operate recirculating cooling water systems at high cycles using impaired waters. The overall approach is to use combinations of novel membrane separations and scale inhibitor technologies that will work synergistically, with membrane separations reducing the scaling potential of the cooling water and scale inhibitors extending the safe operating range of the cooling water system. The project started on March 31, 2006 and ended in August 30, 2010. The project was a multiyear, multi-phase project with laboratory research and development as well as a small pilot-scale field demonstration. In Phase 1 (Technical Targets and Proof of Concept), the objectives were to establish quantitative technical targets and develop calcite and silica scale inhibitor chemistries for high stress conditions. Additional Phase I work included bench-scale testing to determine the feasibility of two membrane separation technologies (electrodialysis ED and electrode-ionization EDI) for scale minimization. In Phase 2 (Technology Development and Integration), the objectives were to develop additional novel scale inhibitor chemistries, develop selected separation processes, and optimize the integration of the technology components at the laboratory scale. Phase 3 (Technology Validation) validated the integrated system's performance with a pilot-scale demonstration. During Phase 1, Initial evaluations of impaired water characteristics focused on produced waters and reclaimed municipal wastewater effluents. Literature and new data were collected and evaluated. Characteristics of produced waters vary significantly from one site to another, whereas reclaimed municipal wastewater effluents have relatively more uniform characteristics. Assessment to date confirmed that calcite and silica

  19. The 24th National Session of Scientific Communications. Abstracts

    International Nuclear Information System (INIS)

    1998-01-01

    The 24th National Session of Scientific Communications was held on 7-9 October, 1998 in Caciulata-Valcea, Romania. The Session covered the following research fields: 1. organic and technological chemistry; 2. inorganic and technological chemistry; 3. polymer chemistry and technology; 4. chemical engineering; 5. environment protection. The section 2 contains two communications referring to 99m Tc-ROMTEC generator and the Romanian production of radioactive labelled products. The section 3 contains a study on polymer radiolysis investigated by computational methods. The following section referring to chemical engineering contains a study of surface science in heavy water facilities, an investigation of corrosion process in CANDU steam generator components and of oxidation in zircaloy-4 tubes, a report referring to o-xylene deuteration technology and a report on 15 N separation by isotopic exchange. Finally, the environment protection section contains a paper reporting on retaining process of UO 3 3+ from uranium in exhausted reactor waters. Proceedings of a poster section are also included. Abstracts of papers on the following items are given: radioluminescent composite materials, radiochemical compatibility of polymers, gamma irradiation effects on elution polymers used in the production of 99m Tc generator, obtaining tritium and deuterium labelled polyacrylic acid and radioinduced grafting of acrylic acid

  20. Does Abstracting Threaten a Sustainable Future?

    Science.gov (United States)

    Grant, Lyle K.

    2012-01-01

    In abstraction, or conceptual behavior, people discriminate features or properties of their surroundings. This permits people to respond selectively and precisely to specialized features of their environment, which has had many benefits, including steady advances in science and technology. Within psychology, J. R. Kantor and B. F. Skinner…

  1. 8. Seminar of the IMP-IIE-ININ on technological specialties. Topic 10: Earth Sciences

    International Nuclear Information System (INIS)

    1996-01-01

    The document contains two papers within INIS subject scope which were presented at the 8th Seminar of the IMP-IIE-ININ on technological specialties. Topic 10: Earth Sciences. A separate abstract was prepared for each paper

  2. Chemical Technology Division progress report for the period April 1, 1981-March 31, 1983

    International Nuclear Information System (INIS)

    1983-09-01

    Separate abstracts were prepared for eight sections of the report: nuclear waste management; fossil energy; basic science and technology; biotechnology and environmental programs; transuranium-element processing; Nuclear Regulatory Commission programs; Three Mile Island support studies; and miscellaneous programs

  3. Astronomy posters. Abstracts.

    Science.gov (United States)

    van Woerden, H.

    Contents: IAU Symposia Nos. 164: Stellar populations. 165: Compact stars in binaries. 166: Astronomical and astrophysical objectives of sub-milliarcsecond optical astrometry. 167: New developments in array technology and applications. 168: Examining the Big Bang and diffuse background radiations. 169: Unsolved problems of the Milky Way. Joint Discussions Nos. 1: Gas disks in galaxies. 2: Origin and detection of planetary systems. 3: Helio- and asteroseismology. 4: Current developments in astronomy education. 5: Activity in the central parts of galaxies. 6: Sun and heliosphere - challenges for solar-terrestrial physics, magneto- and hydrodynamics. 7: History of astronomy. 8: Time scales - state of the art. 9: Women in astronomy. 10: Extragalactic planetary nebulae. 11: Stellar and interstellar lithium and primordial nucleosynthesis. 12: Accuracy of the HR diagram and related parameters. 13: Recent advances in convection theory and modelling. 14: Towards the establishment of the astronomical standards. 15: Statistical evaluation of astronomical time series. 16: Astrophysical applications of powerful new atomic databases. 17: Dust around young stars: How related to solar system dust? 18: Solar system radar observations. 19: Nutation. 20: The status of archiving astronomical data. Working Groups Nos. 1: Problems of astronomy in Africa. 2: Near-Earth objects detection. 3: International catalog projects. 4: Asteroids and comets.

  4. Final Programme and Abstracts

    International Nuclear Information System (INIS)

    2008-01-01

    Molecular targeted radionuclide cancer therapy is becoming of increasing importance, especially for disseminated diseases. Systemic chemotherapies often lack selectivity; targeted radionuclide therapy has important advantages as the radioactive cytotoxic unit of the targeting vector is specifically directed to the cancer, sparing normal tissues. The basis of this COST Action is the great potential of targeted radionuclide therapy using a variety of vectors and radionuclides. This Action brings together the different disciplines involved and provide a reliable and rapid means for developing new (fundamental) knowledge, method standardization and products while promoting transfer of technologies. This Action on cancer therapy using innovative targeting nanomedicines is highly multidisciplinary: nuclear medicine physicians, clinical oncologists, surgeons, physicists, radiobiologists, (in)organic chemists, radiochemists, radiopharmacists, pathologists and scientists from bionics participate in it. They define innovative new targets for cancer therapy, develop lead compounds and new radiolabelled ligands as vectors, perform molecular imaging and biologic testing, develop improved software and protocols for dosimetric calculations and select new vectors for early human use. During the working group meeting held in Cracow participants presented 57 communications (oral and posters, as well) on the above subject

  5. A separator

    Energy Technology Data Exchange (ETDEWEB)

    Prokopyuk, S.G.; Dyachenko, A.Ye.; Mukhametov, M.N.; Prokopov, O.I.

    1982-01-01

    A separator is proposed which contains separating slanted plates and baffle plates installed at a distance to them at an acute angle to them. To increase the effectiveness of separating a gas and liquid stream and the throughput through reducing the secondary carry away of the liquid drops and to reduce the hydraulic resistance, as well, openings are made in the plates. The horizontal projections of each opening from the lower and upper surfaces of the plate do not overlap each other.

  6. Environmental Assessment for the Commercial Demonstration of the Low NOx Burner/Separated Over-Fire Air (LNB/SOFA) Integration System Emission Reduction Technology, Finney County, Kansas

    Energy Technology Data Exchange (ETDEWEB)

    n/a

    2003-03-11

    The U.S. Department of Energy (DOE) proposes to provide partial funding to the Sunflower Electric Power Corporation (Sunflower), to demonstrate the commercial application of Low-NO{sub x} Burner/Separated Over-Fire Air (LNB/SOFA) integration system to achieve NO{sub x} emission reduction to the level of 0.15 to 0.22 pounds per million British thermal units (lb/MM Btu). The proposed project station is Sunflower's 360 MW coal-fired generation station, Holcomb Unit No. 1 (Holcomb Station). The station, fueled by coal from Wyoming's Powder River Basin, is located near Garden City, in Finney County, Kansas. The period of performance is expected to last approximately 2 years. The Holcomb Station, Sunflower LNB/SOFA integrated system would be modified in three distinct phases to demonstrate the synergistic effect of layering NO{sub x} control technologies. Once modified, the station would demonstrate that a unit equipped with an existing low-NO{sub x} burner system can be retrofitted with a new separated over-fire air (SOFA) system, coal flow measurement and control, and enhanced combustion monitoring to achieve about 45 percent reduction in nitrogen oxides (NO{sub x}) emissions. The proposed project would demonstrate a technology alternative to Selective Catalytic Reduction (SCR) systems. While SCR does generally achieve high reductions in NO{sub x} emissions (from about 0.8 lb/MM to 0.12 lb/MM Btu), it does so at higher capital and operating cost, requires the extensive use of critical construction labor, requires longer periods of unit outage for deployment, and generally requires longer periods of time to complete shakedown and full-scale operation. Cost of the proposed project technology would be on the order of 15-25 percent of that for SCR, with consequential benefits derived from reductions in construction manpower requirements and periods of power outages. This proposed technology demonstration would generally be applicable to boilers using opposed

  7. 05421 Abstracts Collection - Data Always and Everywhere

    DEFF Research Database (Denmark)

    Alonso, G.; Jensen, Christian Søndergaard; Mitschang, B.

    2006-01-01

    From 16.10.05 to 21.10.05, the Dagstuhl Seminar 05421, Data Always and Everywhere - Management of Mobile, Ubiquitous, Pervasive, and Sensor Data, was held in the International Conference and Research Center, Schloss Dagstuhl. During the seminar, all participants were given the opportunity...... to present their current research, and ongoing activities and open problems were discussed. This document is a collection of the abstracts of the presentations given during the seminar. Some abstracts offer links to extended abstracts, full papers, and other supporting documents. A separate companion...... document summarizes the seminar. The authors wish to acknowledge Victor Teixeira de Almeida, who served as collector for the seminar and thus played a key role in collecting materials from the seminar participants...

  8. Isotope separation

    International Nuclear Information System (INIS)

    Eerkens, J.W.

    1979-01-01

    A method of isotope separation is described which involves the use of a laser photon beam to selectively induce energy level transitions of an isotope molecule containing the isotope to be separated. The use of the technique for 235 U enrichment is demonstrated. (UK)

  9. Advanced techniques for actinide spectroscopy (ATAS 2012). Abstract book

    Energy Technology Data Exchange (ETDEWEB)

    Foerstendorf, Harald; Mueller, Katharina; Steudtner, Robin (eds.)

    2012-07-01

    The abstract book of the International workshop on advanced techniques for actinide spectroscopy (ATAS 2012) include contributions concerning the following issues: environmental applications, NMR spectroscopy, vibrational spectroscopy, X-ray spectroscopy and theory, technical application: separation processes, emission spectroscopy.

  10. Advanced techniques for actinide spectroscopy (ATAS 2012). Abstract book

    International Nuclear Information System (INIS)

    Foerstendorf, Harald; Mueller, Katharina; Steudtner, Robin

    2012-01-01

    The abstract book of the International workshop on advanced techniques for actinide spectroscopy (ATAS 2012) include contributions concerning the following issues: environmental applications, NMR spectroscopy, vibrational spectroscopy, X-ray spectroscopy and theory, technical application: separation processes, emission spectroscopy.

  11. Earth Sciences Division annual report 1981. [Lead abstract

    Energy Technology Data Exchange (ETDEWEB)

    1982-09-01

    Separate abstracts were prepared for the 59 papers of the 1981 annual report of the Earth Sciences Division at Lawrence Berkeley Laboratory. The general topics covered included nuclear waste isolation, geophysics and reservoir engineering, and geosciences. (KRM)

  12. Energy and technology review

    International Nuclear Information System (INIS)

    Brown, P.S.

    1983-06-01

    Research activities at Lawrence Livermore National Laboratory are described in the Energy and Technology Review. This issue includes articles on measuring chromosome changes in people exposed to cigarette smoke, sloshing-ion experiments in the tandem mirror experiment, aluminum-air battery development, and a speech by Edward Teller on national defense. Abstracts of the first three have been prepared separately for the data base

  13. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    Brown, P.S. (ed.)

    1983-06-01

    Research activities at Lawrence Livermore National Laboratory are described in the Energy and Technology Review. This issue includes articles on measuring chromosome changes in people exposed to cigarette smoke, sloshing-ion experiments in the tandem mirror experiment, aluminum-air battery development, and a speech by Edward Teller on national defense. Abstracts of the first three have been prepared separately for the data base. (GHT)

  14. Abstraction carrying code and resource-awareness

    OpenAIRE

    Hermenegildo, Manuel V.; Albert Albiol, Elvira; López García, Pedro; Puebla Sánchez, Alvaro Germán

    2005-01-01

    Proof-Carrying Code (PCC) is a general approach to mobile code safety in which the code supplier augments the program with a certifícate (or proof). The intended benefit is that the program consumer can locally validate the certifícate w.r.t. the "untrusted" program by means of a certifícate checker—a process which should be much simpler, eíñcient, and automatic than generating the original proof. Abstraction Carrying Code (ACC) is an enabling technology for PCC in which an abstract mod...

  15. CENTRIFUGAL SEPARATORS

    Science.gov (United States)

    Skarstrom, C.

    1959-03-10

    A centrifugal separator is described for separating gaseous mixtures where the temperature gradients both longitudinally and radially of the centrifuge may be controlled effectively to produce a maximum separation of the process gases flowing through. Tbe invention provides for the balancing of increases and decreases in temperature in various zones of the centrifuge chamber as the result of compression and expansions respectively, of process gases and may be employed effectively both to neutralize harmful temperature gradients and to utilize beneficial temperaturc gradients within the centrifuge.

  16. Vision 2020: 2000 Separations Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Adler, Stephen [Center for Waster Reduction Technologies; Beaver, Earl [Practical Sustainability; Bryan, Paul [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Robinson, Sharon [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Watson, Jack [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2000-01-01

    This report documents the results of four workshops on the technology barriers, research needs, and priorities of the chemical, agricultural, petroleum, and pharmaceutical industries as they relate to separation technologies utilizing adsorbents, crystallization, distillation, extraction, membranes, separative reactors, ion exchange, bioseparations, and dilute solutions.

  17. Does the corpus iuris civilis show characteristics of an abstract ...

    African Journals Online (AJOL)

    It is generally accepted that an abstract system for the transfer of property is applied in South Africa. Characteristic of an abstract system is that the different legal acts which form part of the process, namely the obligatory agreement, delivery of the thing concerned or registration and the real agreement are separated from ...

  18. Hanford Personnel Dosimeter supporting studies FY-1980. [Lead abstract

    Energy Technology Data Exchange (ETDEWEB)

    Endres, G.W.R.; Cummings, F.M.; Aldrich, J.M.; Thorson, M.R.; Kathren, R.L.

    1981-02-01

    Separate abstracts were prepared for the 10 sections of this report which describe fundamental characteristics of the Hanford multipurpose personnel dosimeter (HMPD). Abstracts were not prepared for Appendix A and Appendix B which deal with calculated standard deviations for 100 mrem mixed field exposures and detailed calculations of standard deviations, respectively. (KRM)

  19. Separated Shoulder

    Science.gov (United States)

    ... ligaments that hold your collarbone (clavicle) to your shoulder blade. In a mild separated shoulder, the ligaments might ... the ligaments that hold your collarbone to your shoulder blade. Risk factors Participating in contact sports, such as ...

  20. Isotopic separation

    International Nuclear Information System (INIS)

    Chen, C.L.

    1979-01-01

    Isotopic species in an isotopic mixture including a first species having a first isotope and a second species having a second isotope are separated by selectively exciting the first species in preference to the second species and then reacting the selectively excited first species with an additional preselected radiation, an electron or another chemical species so as to form a product having a mass different from the original species and separating the product from the balance of the mixture in a centrifugal separating device such as centrifuge or aerodynamic nozzle. In the centrifuge the isotopic mixture is passed into a rotor where it is irradiated through a window. Heavier and lighter components can be withdrawn. The irradiated mixture experiences a large centrifugal force and is separated in a deflection area into lighter and heavier components. (UK)

  1. Isotopic separation

    International Nuclear Information System (INIS)

    Castle, P.M.

    1979-01-01

    This invention relates to molecular and atomic isotope separation and is particularly applicable to the separation of 235 U from other uranium isotopes including 238 U. In the method described a desired isotope is separated mechanically from an atomic or molecular beam formed from an isotope mixture utilising the isotropic recoil momenta resulting from selective excitation of the desired isotope species by radiation, followed by ionization or dissociation by radiation or electron attachment. By forming a matrix of UF 6 molecules in HBr molecules so as to collapse the V 3 vibrational mode of the UF 6 molecule the 235 UF 6 molecules are selectively excited to promote reduction of UF 6 molecules containing 235 U and facilitate separation. (UK)

  2. Seminar on the use of research reactors in fundamental and applied sciences. Programme and abstracts

    International Nuclear Information System (INIS)

    1984-01-01

    The document includes the programme and the abstracts of papers presented at the ''Seminar on the use of research reactors in fundamental and applied sciences'' organized by the Tajoura Nuclear Research Centre in cooperation with the IAEA at Tajoura, Tripoli (Libya) between 16-20 September 1984. The abstracts are grouped in seven sessions: reactor physics (five abstracts), research reactor programmes (three abstracts), solid state physics (two abstracts), nuclear physics (two abstracts), radiochemistry (eleven abstracts), activation analysis (five abstracts), diverse topics (six abstracts). Separate indexing was provided for each abstract

  3. Separations chemistry

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    Results of studies on the photochemistry of aqueous Pu solutions and the stability of iodine in liquid and gaseous CO 2 are reported. Progress is reported in studies on: the preparation of macroporous bodies filled with oxides and sulfides to be used as adsorbents; the beneficiation of photographic wastes; the anion exchange adsorption of transition elements from thiosulfate solutions; advanced filtration applications of energy significance; high-resolution separations; and, the examination of the separation agents, octylphenylphosphoric acid (OPPA) and trihexyl phosphate (THP)

  4. 7. Annual seminar of the scientific initiation of the Center for Development of Nuclear Technology. Abstracts; 7. Seminario anual de iniciacao cientifica do Centro de Desenvolvimento da Tecnologia Nuclear. Resumos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    This seminar presents the Scientific Initiation Program developed at the CDTN - Brazilian Center for the Development of Nuclear Technology and focuses on activities of the sectors of: radiopharmaceutical production; radiation applied to health; waste management; structural integrity; environment; nanotechnology and nuclear materials; reactor technology; mineral technology; reactor and analytical techniques.

  5. Product separator

    International Nuclear Information System (INIS)

    Welsh, R.A.; Deurbrouck, A.W.

    1976-01-01

    A description is given of a secondary light sensitive photoelectric product separator for use with a primary product separator that concentrates a material so that it is visually distinguishable from adjacent materials. The concentrate separation is accomplished first by feeding the material onto a vibratory inclined surface with a liquid flow, such as a wet concentrating table. Vibrations generally perpendicular to the stream direction of flow cause the concentrate to separate from its mixture according to its color. When the concentrate and its surrounding stream reach the recovery end of the table, a detecting device notes the line of color demarcation and triggers a signal if it differs from a normal condition. If no difference is noted, nothing moves on the second separator. However, if a difference is detected in the constant monitoring of the color line's location, a product splitter and recovery unit normally positioned near the color line at the recovery end, moves to a new position. In this manner the selected separated concentrate is recovered at a maximum rate regardless of variations in the flow stream or other conditions present

  6. Grounding abstractness: Abstract concepts and the activation of the mouth

    Directory of Open Access Journals (Sweden)

    Anna M Borghi

    2016-10-01

    Full Text Available One key issue for theories of cognition is how abstract concepts, such as freedom, are represented. According to the WAT (Words As social Tools proposal, abstract concepts activate both sensorimotor and linguistic/social information, and their acquisition modality involves the linguistic experience more than the acquisition of concrete concepts. We report an experiment in which participants were presented with abstract and concrete definitions followed by concrete and abstract target-words. When the definition and the word matched, participants were required to press a key, either with the hand or with the mouth. Response times and accuracy were recorded. As predicted, we found that abstract definitions and abstract words yielded slower responses and more errors compared to concrete definitions and concrete words. More crucially, there was an interaction between the target-words and the effector used to respond (hand, mouth. While responses with the mouth were overall slower, the advantage of the hand over the mouth responses was more marked with concrete than with abstract concepts. The results are in keeping with grounded and embodied theories of cognition and support the WAT proposal, according to which abstract concepts evoke linguistic-social information, hence activate the mouth. The mechanisms underlying the mouth activation with abstract concepts (re-enactment of acquisition experience, or re-explanation of the word meaning, possibly through inner talk are discussed. To our knowledge this is the first behavioral study demonstrating with real words that the advantage of the hand over the mouth is more marked with concrete than with abstract concepts, likely because of the activation of linguistic information with abstract concepts.

  7. Grounding Abstractness: Abstract Concepts and the Activation of the Mouth.

    Science.gov (United States)

    Borghi, Anna M; Zarcone, Edoardo

    2016-01-01

    One key issue for theories of cognition is how abstract concepts, such as freedom, are represented. According to the WAT (Words As social Tools) proposal, abstract concepts activate both sensorimotor and linguistic/social information, and their acquisition modality involves the linguistic experience more than the acquisition of concrete concepts. We report an experiment in which participants were presented with abstract and concrete definitions followed by concrete and abstract target-words. When the definition and the word matched, participants were required to press a key, either with the hand or with the mouth. Response times and accuracy were recorded. As predicted, we found that abstract definitions and abstract words yielded slower responses and more errors compared to concrete definitions and concrete words. More crucially, there was an interaction between the target-words and the effector used to respond (hand, mouth). While responses with the mouth were overall slower, the advantage of the hand over the mouth responses was more marked with concrete than with abstract concepts. The results are in keeping with grounded and embodied theories of cognition and support the WAT proposal, according to which abstract concepts evoke linguistic-social information, hence activate the mouth. The mechanisms underlying the mouth activation with abstract concepts (re-enactment of acquisition experience, or re-explanation of the word meaning, possibly through inner talk) are discussed. To our knowledge this is the first behavioral study demonstrating with real words that the advantage of the hand over the mouth is more marked with concrete than with abstract concepts, likely because of the activation of linguistic information with abstract concepts.

  8. Mechanical Engineering Department technical abstracts

    International Nuclear Information System (INIS)

    Denney, R.M.

    1982-01-01

    The Mechanical Engineering Department publishes listings of technical abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). Overall information about current activities of each of the Department's seven divisions precedes the technical abstracts

  9. Mechanical Engineering Department technical abstracts

    Energy Technology Data Exchange (ETDEWEB)

    Denney, R.M. (ed.)

    1982-07-01

    The Mechanical Engineering Department publishes listings of technical abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). Overall information about current activities of each of the Department's seven divisions precedes the technical abstracts.

  10. Logical Full Abstraction and PCF

    OpenAIRE

    Longley, John R; Plotkin, Gordon

    2000-01-01

    We introduce the concept of logical full abstraction, generalising the usual equational notion. We consider the language PCF and two extensions with “parallel” operations. The main result is that, for standard interpretations, logical full abstraction is equivalent to equational full abstraction together with universality; the proof involves constructing enumeration operators. We also consider restrictions on logical complexity and on the level of types.

  11. Progress report on nuclear science and technology in China (Vol.3). Proceedings of academic annual meeting of China Nuclear Society in 2013, No.4--isotope separation sub-volume

    International Nuclear Information System (INIS)

    2014-05-01

    Progress report on nuclear science and technology in China (Vol. 3) includes 37 articles which are communicated on the third national academic annual meeting of China Nuclear Society. There are 10 books totally. This is the fourth one, the content is about isotope separation sub-volume

  12. Book of extended synopses. International symposium on advanced nuclear power systems. Design, technology, safety and strategies for their deployment

    International Nuclear Information System (INIS)

    1993-01-01

    During the symposium the design, technology, safety and strategy for the development of advanced nuclear power systems were discussed. 20 papers were presented at the symposium. A separate abstract was prepared for each of these papers. Refs

  13. Chemical Technology Division progress report for the period April 1, 1981-March 31, 1983. [Oak Ridge National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    1983-09-01

    Separate abstracts were prepared for eight sections of the report: nuclear waste management; fossil energy; basic science and technology; biotechnology and environmental programs; transuranium-element processing; Nuclear Regulatory Commission programs; Three Mile Island support studies; and miscellaneous programs.

  14. 6. Seminar of the IIE-ININ-IMP on technological specialties. Topic 10: industrial applications of radiation and control

    International Nuclear Information System (INIS)

    1992-01-01

    The document includes 7 papers presented at the 6. Seminar of the IIE-ININ-IMP (Mexico) on technological specialties in the field of industrial applications of radiation and control. (Topic 10). A separate abstract was prepared for each paper

  15. Abstract

    African Journals Online (AJOL)

    ­E¢b

    direction, which is believed to lead to improved social life and welfare. This means that Ethiopian trade and economic ... holding better market share and customer satisfaction in their products and services. In addition, in both ...... 1995. Dominant Values and Parenting. Styles: Major Limiting Factors on the Development of.

  16. ABSTRACT

    African Journals Online (AJOL)

    their effective participation under different socio- ecological constraints (IDRC, 1993;Takyiwa, 1998;. Kinikanwo, 2000; Isiugo-Abanike, 1994; UNO, 1989). The general issue here is to estimate the extent of female participation in ruminant livestock operations with a view to establishing if stereotyping such operations along.

  17. Abstract

    African Journals Online (AJOL)

    feasible and sustainable options. ... strategies, specific to the benefits of exclusive breastfeeding as a mechanism to reduce the risk of HIV transmission is urgently needed ... Joyce Beatrice Ballidawa is a lecturer in the Department of Behavioural Sciences at Moi University School of Medicine, Eldoret, a position she has held.

  18. Abstracts

    International Nuclear Information System (INIS)

    2013-01-01

    The power point presentation is about: danger identification, caracterization, evaluation exposition, risk (CAC, 1997; FAO, 2007), European food safety authority, foodrisk organization, pathogens risk ranking, risk reduction, gubernamental responsability

  19. ABSTRACT

    Indian Academy of Sciences (India)

    Efforts have also been successfully made to include the study of rock art in the school/ college curriculum so as to help develop awareness amongst the students and general public about the need to preserve this cultural heritage for the posterity and also to highlight its importance in tourism industry. rock art and their ...

  20. ABSTRACT

    Indian Academy of Sciences (India)

    ... school/ college curriculum so as to help develop awareness amongst the students and general public about the need to preserve this cultural heritage for the posterity and also to highlight its importance in tourism industry. rock art and their chronological sequences to more applied aspects like scientific methods of dating ...

  1. Abstract

    African Journals Online (AJOL)

    Francis

    Ficus species. Journal of Ethnopharmacology 41: 71-76. Nadkarni KM (1976) Indian Materia Medica. Third edition, Vol I. Popular Prakhasan, Bombay. NCCLS (National Committee for Clinical Laboratory Standards) (1999). Performance standards for antimicrobial susceptibility testing. 9th International Supplement M100- ...

  2. Abstract

    African Journals Online (AJOL)

    Getachew

    realistic distribution of no-show data in modeling the cost function was considered using data collected from the .... the paper models the cost function based on a realistic probability distributions based on the historical data is a .... Plot of Revenue generated vs. overbooking for two class case (at $500. Compensation Cost ...

  3. Abstract

    African Journals Online (AJOL)

    Dr Osondu

    2011-10-26

    Oct 26, 2011 ... Keywords: Municipal solid waste; Geographic information system; waste bin; optimal location; developing city. Introduction. Over the years, the spatial organization and existing infrastructure of cities in developing countries pose challenges for sustainable solid waste management programs. Much of the ...

  4. Abstract

    African Journals Online (AJOL)

    ATTAMAH C. O

    Differences in Climate Change Effects and Adaptation Strategies between Male and Female Livestock Entrepreneurs in ... differed from females in the adaptation strategies used in combating climate change and also on their view on ..... also make use of the same farm road whether in good or bad shape. This is in line with.

  5. ABSTRACT

    African Journals Online (AJOL)

    Dr Obe

    inner forces (bending moments, shearing forces etc) are usually redistributed. Cracks that often appear within the walls of tall buildings during constructions point to this phenomenon. It has also been recognized that foundation engineering is complicated. (1). Also settlement has been accepted as stress induced and time ...

  6. Abstract

    African Journals Online (AJOL)

    viral activity has been observed for halofantrine, amodiaquine and mepacrine.” The clinical significance of these findings is uncertain“"”-. There is some evidence that HIV protease inhibitors may alter disease outcomes of colnfected patients.

  7. Abstract

    African Journals Online (AJOL)

    was to determine how the natural aerial connec- teracting worker ants from adjacent trees and tions affected'the viability of colonies Oro!. , observing whether fighting took~iplace :(Yar~ra,. IQffginoda in the tree crowns, in the presence of, 1992). Ants of different colonies fight aggres- inimical ants,P" megacephala, 'on the ...

  8. abstract

    Directory of Open Access Journals (Sweden)

    . user

    2016-02-01

    Full Text Available Introduction: One of the microbiological preparations used for this study was Effective Microorganisms (EM, being a commercial mixture of photosynthesizing bacteria, Actinomycetes, lactic acid bacteria, yeasts and fermenting fungi. The microbiological composition of the EM concentrateincludesStreptomyces albus, Propioni bacterium freudenreichil, Streptococcus lactis, Aspergillus oryzae, Mucor hiemalis, Saccharomycescerevisiae and Candida utilis. Moreover, EM also contains an unspecified amount of Lactobacillus sp. Rhodo pseudomonas sp. and Streptomyces griseus. Effective Microorganisms have a positive effect on the decomposition of organic matter, limiting putrefaction, increasing nitrogen content in the root medium of plants, phosphorus, improving soil fertility and as a result contributing to the growth and development of the root systems of plants. Selection of almond vegetative rootstocks for water stress tolerance is important for almond crop production in arid and semi-arid regions. The study of the eco-morphological characteristics that determine the success of a rootstock in a particular environment is a powerful tool for both agricultural management and breeding purposes. The aim of this work was to select the new rootstocks for water shortage tolerance, impact of water stress as well as Effective Microorganism (EM on morphological characteristics of almond rootstocks. Materials and Methods: In order to select the new rootstocks for water shortage tolerance, impact of water stress as well as EMonmorphologicalcharacteristics of almondrootstocks were studiedin thedepartment ofHorticulture, Ferdowsi University of Mashhad, in 2011-2012. The experiment was carried out with four replications in a completely random blockdesign to study the effects of two concentrations of EM (0 and 1%, three irrigation levels (normal irrigation 100%-control-and irrigation after depletion of 33 and 66% of available water, and four almond rootstocks including GF677 and selected natural hybrid of peach × almond (H1and H2, and almond vegetative rootstock (local control.In this study,EMtreatments for 60 days before stress treatments were applied so that in each irrigation, EM solution to a concentration of one percent was given to half of the experiment pots. Other pots were irrigated equally with normal water. Stress levels were applied from July as follow: full irrigation, watering after unloading 33% and 66% soil moisture availability. In order to evaluate the performance, seedling survival, plant growth, number of leaves, leaf area, root fresh and dry weight and leaves and root length were measured. Results and Discussion: Analysis of variance showed that between rootstock levels across all treatments were significantly differences at 0.01 level of probability. Comparison of means showed that the highest fresh and dry weight and leaf are awere observed forGF677and H1.Rootstockannualgrowth rate was also different. Most of the growth was related to the H1 Rootstocks. Thes urvival ratewas significantly different from the Rootstocks ofGF677,andH1showedthe highestpercentage of survival. The degree of adaptation to drought in varieties of almonds is different. The results showed that changes ingrowthparametersinGF677and H1were observed less often than other rootstocks. Because of strong roots,GF677and H1continue to attract more minerals under stress conditions. Analysis of variance showed that the between irrigation levels for all treatments were significantly different at 0.01 level of probability. Comparison of means showed that among the study traits, the highest amount was obtained from complete irrigation, while irrigationat66 percenthad the least amount. Water stress may directly affect photosyn thesis, through leaf photochemicalprocessorindirectly,byclosing stomata, reducingleaf area and growth. The results showed that the levels of(EM on the leaf surface, leaf number, annual growth, root dry weight and volume were significantly different (p

  9. ABSTRACT

    African Journals Online (AJOL)

    BSN

    The preservative effect of CO\\\\'pea pods. seeds, husk. and water and ethanol extracts of the seeds and ... preservation of "kindirmo" with water and ethanol extracts of seeds and husk of. CO\\\\'J)Ca for most of the ... Perhaps same may apply in the area of preservatives: plant products may be safer and biologically friendlier.

  10. Abstract

    Indian Academy of Sciences (India)

    2017-03-10

    Mar 10, 2017 ... TaqMan allelic discrimination assay. .... women). All patients fulfilled the 1987 American College of Rheumatology criteria for RA. (Arnett et al. 1988). A rheumatology university fellow reviewed all clinical data. ... The rs6457617 and rs13192471 were genotyped with a TaqMan 5' allelic discrimination.

  11. Abstracts

    International Nuclear Information System (INIS)

    1989-09-01

    The proceedings contain 106 papers of which 2 fall under the INIS Scope. One concerns seismic risk assessment at radioactive waste repositories in the U.S., the other concerns the possibility of predicting earthquakes from changes in radon 222 levels in selected ground water springs of northern Italy. (M.D.)

  12. abstract

    Directory of Open Access Journals (Sweden)

    abstract abstract

    2016-07-01

    Full Text Available Introduction: Strawberry (fragaria×ananassa Duch. fruit characterized by short storage life, often estimated last less than one week even under optimum conditions at 8°C. The loss of fruit quality is often caused by gray mold (Botrytis cinerea that is the most frequent reported postharvest disease in strawberry during storage (6. In recent years, considerable attention has given to elimination of synthetic chemical and fungicides application and development of various alternative strategies for controlling fruit and vegetables diseases (2. One strategy is replacement of natural products with plant origin such as essential oil and methyl salicylate (MeSA. Essential oils are volatile, natural and complex compounds characterized by a strong odor formed by aromatic plants in form of secondary metabolites. In nature, essential similar oils that extract from lavender (Lavandula angustifolia play an important role in protection of the plants against pathogen incidence that can be replaced by synthetic fungicides (1, 4 and 14. MeSA is also a volatile natural compound synthesized from salicylic acid which has an important role in the plant defense-mechanism, as well as plant growth and development (5, 19 and 20. Therefore, the main objective of this research was to study the effects of MeSA and lavender essential oil (LEO on decay control caused by Botrytis cinerea as well as post-harvest quality indices of strawberry fruits during cold storage. Material and Methods: First, antifungal activity was studied by using a contact assay (in vitro, which produces hyphal growth inhibition. Briefly, potato dextrose agar (PDA plates were prepared using 8 cm diameter glass petri dishes and inhibitory percentage was determined. For in-vivo assessment of LEO and MeSA effects on Botrytis-caused fungal disease control, the experiment was conducted as factorial in completely randomized design (CRD with 3 replicates. The treatments were 3 concentration of LEO including 0, 500 and 1000 µl L-1 and 3 level of MeSA including 0, 0.1 and 0.2 mM. After treatment, the fruits were inoculated by Botrytis suspension and transferred to storage and quality parameters were evaluated after 7, 14 and 21 days. At each sampling time, disease incidence, weight loss, titratable acidity, pH, soluble solids content, vitamin C and antioxidant activity were measured. Results and Discussion: The results showed that both LEO and MeSA treatments had significant effects on inhibition of mycelium growth within in-vitro condition (p < 0.05. Inhibition rate of mycelium growth significantly improved by LEO and MeSA concentration increase of, (Table 1. At in-vivo assessment, diseases incidence of treated fruits with 500 µl L-1 LEO and 0.1 mM MeSA were 32% and 64% lower than untreated fruits, respectively (Fig. 1 and 2. During storage period, the percentage of infected fruits increased. In addition, LEO and MeSA treatments affected quality parameters of strawberry fruits including titratable acidity, soluble solids content, vitamin C and antioxidant activity. Treated fruits had a high content of soluble solids, vitamin C and antioxidant activity in comparison to untreated fruits (Table 3 and 4. Probably ascorbic acid decreased through fungal infection duo to cell wall break down during storage. Any factors such as essential oil and salicylate that inhibit fungal growth can help preserving vitamin C in stored products. High level of vitamin C and antioxidant activity was observed in treated fruits with 0.1 mM MeSA and 500 µl L-1 LEO. In controlling weight loss of fruits, 0.2 mM of MeSA and 500 µl L-1 of LEO had significant effects, although MeSA was more effective than LEO treatments, possibly due to elimination of respiration rates and fungi infection (Table 4. Therefore, LEO and MeSA with fungicide effects could be replaced with synthetic fungicides in controlling fungal diseases of strawberry and maintain fruits quality during storage. Conclusion: In conclusion, our results showed that LEO and MeSA treatments could be safe and used to prevent infection of strawberry during storage, although LEO was more effective than MeSA treatments. Concentration of 500 μl L-1 of LEO and 0.1 mM MeSA could control fungal infection of fruits during storage. Also, LEO and MeSA treatments can extend shelf life for over the minimum period required to transit strawberries to foreign markets and without affecting quality, adversely. However, future studies are necessary to fully understand the mechanisms by which LEO and MeSA treatments may act as a fungicide and increase their postharvest life.

  13. Abstract

    Indian Academy of Sciences (India)

    This talk deals with the geometry of Banach spaces. A non-reflexive Banach space embeds canonically in its second dual and the process continues, giving raise to a strictly increasing chain of Banach spaces. A well known example of a geometric phenomenon that is preserved in this chain, is that of being (isometric) a ...

  14. Abstract

    African Journals Online (AJOL)

    PROF. O. E. OSUAGWU

    This software template is also of immense benefits to students of different ... connection, there is the potential to track learner's action in a ..... intelligence. This software will be a direct application of artificial intelligence to develop a special authoring system for e- learning that will have the ability to learn. Intelligent authoring ...

  15. Abstract

    DEFF Research Database (Denmark)

    Tafdrup, Oliver

    2013-01-01

    Udgivet som en del af Tidskrifts specialudgivelse om Adorno. http://tidskrift.dk/data/50/Aforismesamling.pdf......Udgivet som en del af Tidskrifts specialudgivelse om Adorno. http://tidskrift.dk/data/50/Aforismesamling.pdf...

  16. Abstract

    African Journals Online (AJOL)

    Maru Shete

    of voice, power and representation. To avert this situation, poor women in the research area require equal participation in resources sharing and power of decision making, better employment, housing, education, health care and other opportunities for social service opportunities through savings and credit cooperatives.

  17. ABSTRACT

    African Journals Online (AJOL)

    Chylous leakage is an unusual complication following anterior spinal surgery. This leakage can occur as a result of traumatic injury to the thoracic duct, the cisterna chyli, or the retroperitoneal lymphatic vessels. We report a case of a 56 year old female with thoracic spine disc prolapses with cord compression. She.

  18. Abstract

    Indian Academy of Sciences (India)

    2017-03-10

    Mar 10, 2017 ... Significant p-values were corrected (pc) by the number of alleles tested or subgroups analysed according to Bonferroni's ... LD in healthy controls between both rs13192471/rs6457617 with a value of D'=0.99 and ..... Radstake T.R., Gorlova O., Rueda B., Martin J.E., Alizadeh B.Z., Palomino-Morales R. et al.

  19. ABSTRACT

    African Journals Online (AJOL)

    -. 1111'. Cl". SO41-. (11-. $0}-. C1; sof-. SW' s-j'. (11; so}. New-_ Blank 'spa§cS imply rhelal levels below cleteczim. ,1 z,m1:> .Qu11>»»»: mtalive analysis _ . 1 mined for individual 1ni11cral. §_'r['§>f:é€lY.l.'.l.fi;'u'- we Table l 006%. 1 ii'!

  20. Abstract

    African Journals Online (AJOL)

    Getachew

    request made by a customer for a reservation of a certain class at time T. Although dynamic .... to both customer reaction upon denied boarding and profit loss. .... Sabanci University. http://www.optimization- online.org. Bailey, J. 2007. Bumped fliers and no plan B. The New York Times. Beckman, M.J & Bobkoski, F. 1985.

  1. Abstract

    African Journals Online (AJOL)

    UDS-CAPTURED

    The high cost of delivering financial services to small and widely dispersed customers as well as difficult financial terrain in rural settings characterized by high covariant risks, missing markets for risk management instruments and ... Improving the extent of access to credit for low income households is a vital part of any rural ...

  2. ABSTRACT

    African Journals Online (AJOL)

    production alone cannot provide the animal protein needs of about 100 million Nigerians. This, therefore calls for ... Fish contributes about 12 percent of the total animal protein supply of the World population (Borgstorm, ..... motivation for extension personnel (7.5%), inadequate transport facilities (5.5%), absence of strong ...

  3. Abstract

    African Journals Online (AJOL)

    Implementing this collaborative e-learning environment on a Linux thin-client system makes it possible for this environment to be available in most schools and companies because the Linux thin-clients are less expensive than other conventional computing systems. Developing a. Collaborative E-Learning Environment on ...

  4. abstract

    African Journals Online (AJOL)

    communication and institutions activities in removing constraints which impede the acceptance and continued usage .... With farmers' feedback, scientists cannot misinterpret a problem or attribute wrong causes to it. ..... Protection and Environmental Management, University of lbadan,. Ibadan. Ashby, J. (1990): Small-farmer ...

  5. Abstract ~. ,

    African Journals Online (AJOL)

    Governmenf to educate dairy farmers, milli vendors and the consume~s on the importance of producing, selling and consuming respectively un-adulterated milk. Key words: Milk, water adulteration, Morogoro Municipality. Introduction. Total annual milk production in Tanzania is estimated to be at 724,000 metric tons (F AO,.

  6. Low-level radioactive waste from commercial nuclear reactors. Volume 3. Bibliographic abstracts of significant source references. Part 2. Bibliography for treatment, storage, disposal and transportation regulatory constraints

    Energy Technology Data Exchange (ETDEWEB)

    Jolley, R.L.; Rodgers, B.R.

    1986-05-01

    The overall task of this program was to provide an assessment of currently available technology for treating commercial low-level radioactive waste (LLRW), to initiate development of a methodology for choosing one technology for a given application, and to identify research needed to improve current treatment techniques and decision methodology. The resulting report is issued in four volumes. Volume 3 of this series is a collection of abstracts of most of the reference documents used for this study. Because of the large volume of literature, the abstracts have been printed in two separate parts. Federal, state, and local regulations affect the decision process for selecting technology applications. Regulations may favor a particular technology and may prevent application of others. Volume 3, part 2 presents abstracts of the regulatory constraint documents that relate to all phases of LLRW management (e.g., treatment, packaging, storage, transportation, and disposal).

  7. Industrial Energy Conservation Technology

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    A separate abstract was prepared for each of the 55 papers presented in this volume, all of which will appear in Energy Research Abstracts (ERA); 18 were selected for Energy Abstracts for Policy Analysis (EAPA). (MCW)

  8. Industrial energy conservation technology

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, P.S.; Williams, M.A. (eds.)

    1980-01-01

    A separate abstract was prepared for each of the 60 papers included in this volume, all of which will appear in Energy Research Abstracts (ERA); 21 were selected for Energy Abstracts for Policy Analysis (EAPA). (MCW)

  9. Proceedings of the solar thermal concentrating collector technology symposium

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, B.P.; Kreith, F. (eds.)

    1978-08-01

    The purpose of the symposium was to review the current status of the concentrating collector technology, to disseminate the information gained from experience in operating solar systems, and to highlight the significant areas of technology development that must be vigorously pursued to foster early commercialization of concentrating solar collectors. Separate abstracts were prepared for thirteen invited papers and working group summaries. Two papers were previously abstracted for EDB.

  10. Separable algebras

    CERN Document Server

    Ford, Timothy J

    2017-01-01

    This book presents a comprehensive introduction to the theory of separable algebras over commutative rings. After a thorough introduction to the general theory, the fundamental roles played by separable algebras are explored. For example, Azumaya algebras, the henselization of local rings, and Galois theory are rigorously introduced and treated. Interwoven throughout these applications is the important notion of étale algebras. Essential connections are drawn between the theory of separable algebras and Morita theory, the theory of faithfully flat descent, cohomology, derivations, differentials, reflexive lattices, maximal orders, and class groups. The text is accessible to graduate students who have finished a first course in algebra, and it includes necessary foundational material, useful exercises, and many nontrivial examples.

  11. Isotope separation

    International Nuclear Information System (INIS)

    Bartlett, R.J.; Morrey, J.R.

    1978-01-01

    A method and apparatus is described for separating gas molecules containing one isotope of an element from gas molecules containing other isotopes of the same element in which all of the molecules of the gas are at the same electronic state in their ground state. Gas molecules in a gas stream containing one of the isotopes are selectively excited to a different electronic state while leaving the other gas molecules in their original ground state. Gas molecules containing one of the isotopes are then deflected from the other gas molecules in the stream and thus physically separated

  12. Isotopic separation

    International Nuclear Information System (INIS)

    Chen, C.

    1981-01-01

    Method and apparatus for separating isotopes in an isotopic mixture of atoms or molecules by increasing the mass differential among isotopic species. The mixture containing a particular isotope is selectively irradiated so as to selectively excite the isotope. This preferentially excited species is then reacted rapidly with an additional preselected radiation, an electron or another chemical species so as to form a product containing the specific isotope, but having a mass different than the original species initially containing the particular isotope. The product and the remaining balance of the mixture is then caused to flow through a device which separates the product from the mixture based upon the increased mass differential

  13. 6. Seminar of the IIE-ININ-IMP on technological specialties. Topic 15: commercialization and technology transfer

    International Nuclear Information System (INIS)

    1992-01-01

    The document includes 9 papers presented at the 6. Seminar of the IIE-ININ-IMP (Mexico) on technological specialties in the field of commercialization and technology transfer. (Topic 15). One item was in INIS s ubject scope and a separate abstract was prepared for it

  14. Modal abstractions of concurrent behavior

    DEFF Research Database (Denmark)

    Nielson, Flemming; Nanz, Sebastian; Nielson, Hanne Riis

    2011-01-01

    We present an effective algorithm for the automatic construction of finite modal transition systems as abstractions of potentially infinite concurrent processes. Modal transition systems are recognized as valuable abstractions for model checking because they allow for the validation as well as re...

  15. Pattern-Based Graph Abstraction

    NARCIS (Netherlands)

    Rensink, Arend; Zambon, Eduardo; Ehrig, H; Engels, G.; Kreowski, H.J.; Rozenberg, G.

    We present a new abstraction technique for the exploration of graph transformation systems with infinite state spaces. This technique is based on patterns, simple graphs describing structures of interest that should be preserved by the abstraction. Patterns are collected into pattern graphs, layered

  16. Abstraction by Set-Membership

    DEFF Research Database (Denmark)

    Mödersheim, Sebastian Alexander

    2010-01-01

    that the set of true facts does not monotonically grow with the transitions. We extend the scope of these over-approximation methods by defining a new way of abstraction that can handle such databases, and we formally prove that the abstraction is sound. We realize a translator from a convenient specification...

  17. Abstract concepts in grounded cognition

    NARCIS (Netherlands)

    Lakens, D.

    2010-01-01

    When people think about highly abstract concepts, they draw upon concrete experiences to structure their thoughts. For example, black knights in fairytales are evil, and knights in shining armor are good. The sensory experiences black and white are used to represent the abstract concepts of good and

  18. Pacific Northwest Laboratory annual report for 1980 to the DOE Assistant Secretary for Environment. Part 1. Biomedical sciences. [Lead abstract

    Energy Technology Data Exchange (ETDEWEB)

    Drucker, H.

    1981-02-01

    Separate abstracts were prepared for 31 sections in this progress report. The appendix which deals with dose-effect studies with inhaled plutonium in beagles is not represented by a separate abstract. (KRM)

  19. USDA-ARS research update: Improved solid-liquid separation using polymers in flushing systems and new technology to recover the ammonia from covered lagoons

    Science.gov (United States)

    Part 1: Improved method for recovery of organic solids from diluted swine manure: Solid-liquid separation of the raw manure increases the capacity of decision making and opportunities for treatment. The high-rate separation up-front using flocculants allows recovery of most of the organic compounds,...

  20. ENVIRONMENTAL TECHNOLOGY VERIFICATION: JOINT (NSF-EPA) VERIFICATION STATEMENT AND REPORT: BROME AGRI SALES, LTD., MAXIMIZER SEPARATOR, MODEL MAX 1016 - 03/01/WQPC-SWP

    Science.gov (United States)

    Verification testing of the Brome Agri Sales Ltd. Maximizer Separator, Model MAX 1016 (Maximizer) was conducted at the Lake Wheeler Road Field Laboratory Swine Educational Unit in Raleigh, North Carolina. The Maximizer is an inclined screen solids separator that can be used to s...

  1. Research and development project in fiscal 1989 for fundamental technologies for next generation industries. Achievement report on research and development on high-efficiency polymer separating film materials; 1989 nendo kokoritsu kobunshi bunrimaku zairyo no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-03-01

    With an objective to improve efficiency and energy conservation in separation processes used in the chemical industry, researches have been performed on high-efficiency liquid separating film and air separating film materials. This paper summarizes the achievements in fiscal 1989. With regard to molecule recognizing films, researches were made on oxygen and carbon monoxide carriers, and on the elementary technology for fabricating the carrier films. In the research of metal complex fixing thin films, discussions were given on causes for deactivation in complex films. In the research of high-functional complex films, discussions were given on the structure of polymer ligand/carrier complex system solid films, and on oxygen adsorption and desorption properties. Solid film structures were selected that suit the oxygen separating films. In the research of alcohol condensation films, discussions were given on polydimethylsiloxane constituent that shows ethanol selectivity and permeability, and a multi-phase system polymeric film composed of one other constituent. In the research of water-acetic acid separating films, the basic performance of polyurea film was discussed, and evaluation was given by means of a durability test. In the research of particle separation method utilizing liquid films, a prototype continuous particle separating device was fabricated. (NEDO)

  2. Technical abstracts: Mechanical engineering, 1990

    International Nuclear Information System (INIS)

    Broesius, J.Y.

    1991-01-01

    This document is a compilation of the published, unclassified abstracts produced by mechanical engineers at Lawrence Livermore National Laboratory (LLNL) during the calendar year 1990. Many abstracts summarize work completed and published in report form. These are UCRL-JC series documents, which include the full text of articles to be published in journals and of papers to be presented at meetings, and UCID reports, which are informal documents. Not all UCIDs contain abstracts: short summaries were generated when abstracts were not included. Technical Abstracts also provides descriptions of those documents assigned to the UCRL-MI (miscellaneous) category. These are generally viewgraphs or photographs presented at meetings. An author index is provided at the back of this volume for cross referencing

  3. Metaphor: Bridging embodiment to abstraction.

    Science.gov (United States)

    Jamrozik, Anja; McQuire, Marguerite; Cardillo, Eileen R; Chatterjee, Anjan

    2016-08-01

    Embodied cognition accounts posit that concepts are grounded in our sensory and motor systems. An important challenge for these accounts is explaining how abstract concepts, which do not directly call upon sensory or motor information, can be informed by experience. We propose that metaphor is one important vehicle guiding the development and use of abstract concepts. Metaphors allow us to draw on concrete, familiar domains to acquire and reason about abstract concepts. Additionally, repeated metaphoric use drawing on particular aspects of concrete experience can result in the development of new abstract representations. These abstractions, which are derived from embodied experience but lack much of the sensorimotor information associated with it, can then be flexibly applied to understand new situations.

  4. Technical abstracts: Mechanical engineering, 1990

    Energy Technology Data Exchange (ETDEWEB)

    Broesius, J.Y. (comp.)

    1991-03-01

    This document is a compilation of the published, unclassified abstracts produced by mechanical engineers at Lawrence Livermore National Laboratory (LLNL) during the calendar year 1990. Many abstracts summarize work completed and published in report form. These are UCRL-JC series documents, which include the full text of articles to be published in journals and of papers to be presented at meetings, and UCID reports, which are informal documents. Not all UCIDs contain abstracts: short summaries were generated when abstracts were not included. Technical Abstracts also provides descriptions of those documents assigned to the UCRL-MI (miscellaneous) category. These are generally viewgraphs or photographs presented at meetings. An author index is provided at the back of this volume for cross referencing.

  5. Abstract Interpretation and Attribute Gramars

    DEFF Research Database (Denmark)

    Rosendahl, Mads

    The objective of this thesis is to explore the connections between abstract interpretation and attribute grammars as frameworks in program analysis. Abstract interpretation is a semantics-based program analysis method. A large class of data flow analysis problems can be expressed as non-standard ......The objective of this thesis is to explore the connections between abstract interpretation and attribute grammars as frameworks in program analysis. Abstract interpretation is a semantics-based program analysis method. A large class of data flow analysis problems can be expressed as non......-standard semantics where the ``meaning'' contains information about the runtime behaviour of programs. In an abstract interpretation the analysis is proved correct by relating it to the usual semantics for the language. Attribute grammars provide a method and notation to specify code generation and program analysis...

  6. Magnetic Suspension Technology Workshop

    International Nuclear Information System (INIS)

    Keckler, C.R.; Groom, N.J.; Britcher, C.P.

    1993-01-01

    In order to identify the state of magnetic suspension technology in such areas as rotating systems, pointing of experiments or subsystems, payload isolation, and superconducting materials, a workshop on Magnetic Suspension Technology was held at the Langley Research Center in Hampton, Virginia, on 2-4 Feb. 1988. The workshop included five technical sessions in which a total of 24 papers were presented. The technical sessions covered the areas of pointing, isolation, and measurement, rotating systems, modeling and control, and superconductors. A list of attendees is provided. Separate abstracts have been prepared for articles from this report

  7. Advanced light source: Compendium of user abstracts 1993-1996

    International Nuclear Information System (INIS)

    1997-04-01

    This compendium contains abstracts written by users summarizing research completed or in progress from 1993-1996, ALS technical reports describing ongoing efforts related to improvement in machine operations and research and development projects, and information on ALS beamlines planned through 1998. Two tables of contents organize the user abstracts by beamline and by area of research, and an author index makes abstracts accessible by author and by principal investigator. Technical details for each beamline including whom to contact for additional information can be found in the beamline information section. Separate abstracts have been indexed into the database for contributions to this compendium

  8. Thirteen international workshop on nuclear theory. Abstracts

    International Nuclear Information System (INIS)

    1994-01-01

    This brochure contains the abstracts of reports delivered by 40 participants at the 13. International Workshop on Nuclear Theory organized by the Nuclear Theory Group in the Institute for Nuclear research and Nuclear Energy of the Bulgarian academy of Sciences. The main topics treated in the lectures were nucleon correlation effects in nuclei, collective nuclear motions, Wigner quantum systems, pre-equilibrium neutron and photon emission from nuclei, particle-nuclei collision processes at high energies, few-body states, optical potential for neutron-nucleus scattering, relativistic generator coordinate calculations and variational nuclear structure calculations. All reports are included in INIS separately

  9. Research and development of basic technologies for next generation industries, 'high-efficiency polymeric separation membrane material'. Evaluation on second term final research and development (first report); Jisesdai sangyo kiban gijutsu kenkyu kaihatsu. Kokoritsu bunshi bunrimaku zairyo (dainiki kenkyu kaihatsu hyoka)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-03-01

    This study is intended to establish a basic technology for innovative high-efficiency separation membrane materials that can be used in areas in which application of membrane separation has been impossible. The water/ethanol separation membrane (for water selective permeation) and water/acetic acid separation membrane (for water selective permeation) achieved separation coefficient and permeation velocity of the world's highest level. The water/ethanol separation membrane (for ethanol selective permeation), although its separation coefficient is lower than the world's highest performance, has high permeation velocity, providing the performance of the worldwide level as seen from the comprehensive viewpoint. The carbon monoxide/nitrogen separation membrane achieved separation coefficient and permeation velocity of the world's highest level. The oxygen/nitrogen separation membrane requires further enhancement in the permeation velocity and stability. Establishment has been performed on separation technologies for membrane separation of non-water soluble aqueous solutions, optical division by using chiral crown ether, high-performance liquid separation by means of plasma surface treatment, and particle separation. Basic analysis has been advanced also on evaluation technologies for gaseous body separation membrane and liquid separation membrane, of which future progress is expected. (NEDO)

  10. Russian separation program

    International Nuclear Information System (INIS)

    Rea, J.L.

    1993-01-01

    A small contract signed in FY92 with the Khlopin Radium Institute marked the beginning of the Russian Separations program. Under this contract the Khlopin Radium Institute performed laboratory and dynamic hot-cell testing using cobalt dicarbollide technology on simulated radioactive wastes similar to those found at DOE sites in the United States. The current scope of investigation has been extended to identify prospective technologies for application to other United States needs. The Khlopin Radium Institute project served as a model for three other pilot scale technology development projects. The premise of the pilot scale projects is to enable Russian scientists to demonstrate their technology in the context of DOE needs, using Russian technical expertise has proven to be a cost-effective means of screening Russian technologies

  11. Proceedings of the efficient separations and processing crosscutting program 1997 technical exchange meeting

    Energy Technology Data Exchange (ETDEWEB)

    Gephart, J.M. [ed.

    1997-05-01

    This document contains summaries of technology development presented at the 1997 Efficient Separations and Processing Crosscutting Program (ESP-CP) Technical Exchange Meeting (TEM), held January 28-30, 1997, in Gaithersburg, Maryland. The ESP-CP is sponsored by the U.S. Department of Energy`s Office of Environmental Management (DOE/EM), Office of Science and Technology. The ESP-CP TEM is held annually to: (1) Present current technology development activities funded by the ESP-CP. Developers of ESP-CP-funded technologies describe the problems and needs addressed by their technologies; the technical approach, accomplishments, and resolution of issues; the strategy and schedule for commercialization; and evolving potential applications. Representatives from DOE/EM`s Focus Areas also present their technology needs. (2) Promote the exchange of technical information among those developing new separations technologies, those responsible for providing new separations technologies to meet DOE/EM needs, and those who need or will potentially make use of such technologies. (3) Familiarize the ESP-CP Technical Review Team with the FY 1997 program and solicit reviewers` views on the program as a whole. This meeting is not a program review of the individual tasks, but instead focuses on the technical aspects and implementation of ESP-CP-sponsored technology or data. This document also contains a list of ESP-CP-sponsored publications, presentations, and patents. Separate abstracts have been indexed into the energy database for contributions to this proceedings.

  12. Proceedings of the efficient separations and processing crosscutting program 1997 technical exchange meeting

    International Nuclear Information System (INIS)

    Gephart, J.M.

    1997-01-01

    This document contains summaries of technology development presented at the 1997 Efficient Separations and Processing Crosscutting Program (ESP-CP) Technical Exchange Meeting (TEM), held January 28-30, 1997, in Gaithersburg, Maryland. The ESP-CP is sponsored by the U.S. Department of Energy's Office of Environmental Management (DOE/EM), Office of Science and Technology. The ESP-CP TEM is held annually to: (1) Present current technology development activities funded by the ESP-CP. Developers of ESP-CP-funded technologies describe the problems and needs addressed by their technologies; the technical approach, accomplishments, and resolution of issues; the strategy and schedule for commercialization; and evolving potential applications. Representatives from DOE/EM's Focus Areas also present their technology needs. (2) Promote the exchange of technical information among those developing new separations technologies, those responsible for providing new separations technologies to meet DOE/EM needs, and those who need or will potentially make use of such technologies. (3) Familiarize the ESP-CP Technical Review Team with the FY 1997 program and solicit reviewers' views on the program as a whole. This meeting is not a program review of the individual tasks, but instead focuses on the technical aspects and implementation of ESP-CP-sponsored technology or data. This document also contains a list of ESP-CP-sponsored publications, presentations, and patents. Separate abstracts have been indexed into the energy database for contributions to this proceedings

  13. Nuclear technology for the year 2000

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    Eighteen papers and abstracts are presented under the following session headings: space nuclear power, health physics and dosimetry, nuclear design and thermal hydraulics, nuclear diagnostics, and fusion technology and plasma physics. The papers were processed separately for the data base. (DLC)

  14. Low-level radioactive waste from commercial nuclear reactors. Volume 3. Bibliographic abstracts of significant source documents. Part 1. Open-literature abstracts for low-level radioactive waste

    International Nuclear Information System (INIS)

    Bowers, M.K.; Rodgers, B.R.; Jolley, R.L.

    1986-05-01

    The overall task of this program was to provide an assessment of currently available technology for treating commercial low-level radioactive waste (LLRW), to initiate development of a methodology for choosing one technology for a given application, and to identify research needed to improve current treatment techniques and decision methodology. The resulting report is issued in four volumes. Volume 3 of this series is a collection of abstracts of most of the reference documents used for this study. Because of the large volume of literature, the abstracts have been printed in two separate parts. Volume 3, part 1 presents abstracts of the open literature relating to LLRW treatment methodologies. Some of these references pertain to treatment processes for hazardous wastes that may also be applicable to LLRW management. All abstracts have been limited to 21 lines (for brevity), but each abstract contains sufficient information to enable the reader to determine the potential usefulness of the source document and to locate each article. The abstracts are arranged alphabetically by author or organization, and indexed by keyword

  15. Low-level radioactive waste from commercial nuclear reactors. Volume 3. Bibliographic abstracts of significant source documents. Part 1. Open-literature abstracts for low-level radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    Bowers, M.K.; Rodgers, B.R.; Jolley, R.L.

    1986-05-01

    The overall task of this program was to provide an assessment of currently available technology for treating commercial low-level radioactive waste (LLRW), to initiate development of a methodology for choosing one technology for a given application, and to identify research needed to improve current treatment techniques and decision methodology. The resulting report is issued in four volumes. Volume 3 of this series is a collection of abstracts of most of the reference documents used for this study. Because of the large volume of literature, the abstracts have been printed in two separate parts. Volume 3, part 1 presents abstracts of the open literature relating to LLRW treatment methodologies. Some of these references pertain to treatment processes for hazardous wastes that may also be applicable to LLRW management. All abstracts have been limited to 21 lines (for brevity), but each abstract contains sufficient information to enable the reader to determine the potential usefulness of the source document and to locate each article. The abstracts are arranged alphabetically by author or organization, and indexed by keyword.

  16. Nuclear works. Book of abstracts

    International Nuclear Information System (INIS)

    Candel, Danielle; Calberg-Challot, Marie; Alexander, Catherine; Bergsman, Anne; Meyer, Morgan; Taebi, Behnam; Kloosterman, Jan Leen; Kelfaoui, Mahdi; Gingras, Yves; Laborie, Leonard; Beltran, Alain; Bouvier, Yves; Raineau, Laurence; Poirot-Delpech, Sophie; Ollivon, Franck; Mueller, Birgit; Lemarchand, Frederick; Rivat, Emmanuel; Mormont, Marc; Aparicio, Luis; Fassert, Christine; Lehtonen, Markku; Billet, Philippe; Girard, Berenice; Fournier, Pierre; Marion, Richard; Lot, Nicolas

    2012-01-01

    The interdisciplinary conference 'How can the social sciences help us understand the nuclear world?' seeks to reassess the relations between nuclear and social science research. It has two objectives. First, it seeks to take stock of and build on existing research by making explicit the theoretical approaches, the research methods, the difficulties met by researchers and by possibly identifying aspects of the nuclear phenomenon that may have been neglected or left out by existing research. Second, it wishes to question the relevance of social science to contemporary nuclear debates and policy making. The conference was organized in 6 sessions dealing with: 1 - Nuclear discourses - Contents and legitimacies: Nuclear terminology: from the dictionary to industrial practices (Danielle Candel, Marie Calberg-Challot), The problem of recognizing nuclear objects (Catherine Alexander), Demonstrating safety (Anne Bergsman, Morgan Meyer), Designing for nuclear safety, security and sustainability: a philosophical discourse of the nuclear reactor (Behnam Taebi, Jan Leen Kloosterman); 2 - History, time and space. Tropes of nuclear activity: The Gentilly-1 NPP history: a technological failure? (Mahdi Kelfaoui, Yves Gingras), Nuclear history: experience and research prospects (Leonard Laborie, Yves Bouvier, Alain Beltran), Temporality clash in front of radioactive wastes disposal (Laurence Raineau, Sophie Poirot-Delpech), Canadian nuclear from the standpoint of territoriality: how a NPP shapes space? (Franck Ollivon); 3 - Citizen mobilizations and the experience of disaster: 'We could make a moonscape out of the whole country...' Anti-Nuclear Activism at the Czech - Austrian Border (Birgit Mueller), From a catastrophe to the other: living with nuclear (Frederick Lemarchand), Nuclear contestation: between information, confrontation and political communication - 1970-2010 (Emmanuel Rivat); 4 - Social science meets the nuclear industry: Renegotiating repository safety: the history of

  17. Isotope separation

    International Nuclear Information System (INIS)

    Coleman, G.H.; Bett, R.; Cuninghame, J.G.; Sims, H.

    1982-01-01

    In the separation of short-lived isotopes for medical usage, a solution containing sup(195m)Hg is contacted with vicinal dithiol cellulose which adsorbs and retains the sup(195m)Hg. sup(195m)Au is eluted from the vicinal dithiol cellulose by using a suitable elutant. The sup(195m)Au arises from the radioactive decay of the sup(195m)Hg. The preferred elutant is a solution containing CN - ion. (author)

  18. Gas separating

    Science.gov (United States)

    Gollan, Arye Z.

    1990-12-25

    Feed gas is directed tangentially along the non-skin surface of gas separation membrane modules comprising a cylindrical bundle of parallel contiguous hollow fibers supported to allow feed gas to flow from an inlet at one end of a cylindrical housing through the bores of the bundled fibers to an outlet at the other end while a component of the feed gas permeates through the fibers, each having the skin side on the outside, through a permeate outlet in the cylindrical casing.

  19. Nuclear energy and environment: abstracts

    International Nuclear Information System (INIS)

    1999-01-01

    In this meeting on nuclear energy and environment, abstracts on the following subjects were presented: nuclear fuels; materials; radioisotopes and its applications; reactors and nuclear power plants; regulations, energy and environment; radioactive wastes; and analytical techniques

  20. Separation Logic

    DEFF Research Database (Denmark)

    Reynolds, John C.

    2002-01-01

    In joint work with Peter O'Hearn and others, based on early ideas of Burstall, we have developed an extension of Hoare logic that permits reasoning about low-level imperative programs that use shared mutable data structure. The simple imperative programming language is extended with commands (not...... with the inductive definition of predicates on abstract data structures, this extension permits the concise and flexible description of structures with controlled sharing. In this paper, we will survey the current development of this program logic, including extensions that permit unrestricted address arithmetic...

  1. 14th radiochemical conference. Booklet of abstracts

    International Nuclear Information System (INIS)

    2002-03-01

    The contributions dealt with the following topics: Radionuclides in the environment, radioecology; Nuclear analytical methods; Chemistry of actinide and trans-actinide elements; Ionizing radiation in science, technology, and arts and cultural heritage preservation; Production and application of radionuclides; Separation methods, speciation; Chemistry of nuclear fuel cycle, radiochemical problems in nuclear waste management; and Nuclear methods in medicine, radiopharmaceuticals, and radiodiagnostics, labelled compounds. Of the verbal and poster presentation, 192 have been input to INIS. (P.A.)

  2. Odors and Air Pollution: A Bibliography with Abstracts.

    Science.gov (United States)

    Environmental Protection Agency, Research Triangle Park, NC. Office of Air Programs.

    The annotated bibliography presents a compilation of abstracts which deal with odors as they relate to air pollution. The abstracts are arranged within the following categories: Emission sources; Control methods; Measurement methods; Air quality measurements; Atmospheric interaction; Basic science and technology; Effects-human health;…

  3. Embodied cognition, abstract concepts, and body manipulation

    Directory of Open Access Journals (Sweden)

    Katinka eDijkstra

    2014-08-01

    Full Text Available Current approaches on cognition hold that concrete concepts are grounded in concrete experiences. There is no consensus, however, as to whether this is equally true for abstract concepts. In this review we discuss how the body might be involved in understanding abstract concepts through metaphor activation. Substantial research has been conducted on the activation of common orientational metaphors with bodily manipulations, such as ‘power is up’ and ‘more is up’ representations. We will focus on the political metaphor that has a more complex association between the concept and the concrete domain. However, the outcomes of studies on this political metaphor have not always been consistent, possibly because the experimental manipulation was not implicit enough. The inclusion of new technological devices in this area of research, such as the Wii Balance Board, seems promising in order to assess the groundedness of abstract conceptual spatial metaphors in an implicit manner. This may aid further research to effectively demonstrate the interrelatedness between the body and more abstract representations.

  4. Content Abstract Classification Using Naive Bayes

    Science.gov (United States)

    Latif, Syukriyanto; Suwardoyo, Untung; Aldrin Wihelmus Sanadi, Edwin

    2018-03-01

    This study aims to classify abstract content based on the use of the highest number of words in an abstract content of the English language journals. This research uses a system of text mining technology that extracts text data to search information from a set of documents. Abstract content of 120 data downloaded at www.computer.org. Data grouping consists of three categories: DM (Data Mining), ITS (Intelligent Transport System) and MM (Multimedia). Systems built using naive bayes algorithms to classify abstract journals and feature selection processes using term weighting to give weight to each word. Dimensional reduction techniques to reduce the dimensions of word counts rarely appear in each document based on dimensional reduction test parameters of 10% -90% of 5.344 words. The performance of the classification system is tested by using the Confusion Matrix based on comparative test data and test data. The results showed that the best classification results were obtained during the 75% training data test and 25% test data from the total data. Accuracy rates for categories of DM, ITS and MM were 100%, 100%, 86%. respectively with dimension reduction parameters of 30% and the value of learning rate between 0.1-0.5.

  5. Particle separation

    International Nuclear Information System (INIS)

    Baker, C.A.

    1990-01-01

    Solid particles are separated from a liquid which also contains ferric hydroxide by subjecting the liquid to ultrasonic agitation from a transducer in order to break up the flocs so that they will pass with the liquid through a filter belt. The belt thus retains the solid particles without interference from the flocs. As shown the woven nylon belt collects rare radioactive solid particles from liquid and carries them under sensors. The belt is washed clean, with further ultrasonic agitation in a trough on its return run. (author)

  6. Isotope separation

    International Nuclear Information System (INIS)

    Rosevear, A.; Sims, H.E.

    1985-01-01

    sup(195m)Au for medical usage is separated from sup(195m)Hg in a solution containing ions of sup(195m)Hg by contacting the solution with an adsorbing agent to adsorb 195 Hgsup(H) thereon, followed by selective elution of sup(195m)Au generated by radioactive decay of the sup(195m)Hg. The adsorbing agent comprises a composite material in the form of an inert porous inorganic substrate (e.g. Kieselguhr),the pores of which are occupied by a hydrogel of a polysaccharide (e.g. agarose) carrying terminal thiol groups for binding Hgsup(H) ions. (author)

  7. Gas separating

    Science.gov (United States)

    Gollan, A.

    1988-03-29

    Feed gas is directed tangentially along the non-skin surface of gas separation membrane modules comprising a cylindrical bundle of parallel contiguous hollow fibers supported to allow feed gas to flow from an inlet at one end of a cylindrical housing through the bores of the bundled fibers to an outlet at the other end while a component of the feed gas permeates through the fibers, each having the skin side on the outside, through a permeate outlet in the cylindrical casing. 3 figs.

  8. Isotope separation

    International Nuclear Information System (INIS)

    Coleman, J.H.; Marks, T.J.

    1981-01-01

    A process for separating uranium isotopes is described which includes: preparing a volatile compound U-T, in which U is a mixture of uranium isotopes and T is a chemical moiety containing at least one organic or deuterated borohydride group, and which exhibits for at least one isotopic species thereof a fundamental, overtone or combination vibrational absorption excitation energy level at a frequency between 900 and 1100 cm -1 ; and irradiating the compound in the vapour phase with energy emitted by a radiation source at a frequency between 900 and 1100 cm -1 (e.g. a CO 2 laser). (author)

  9. ILL2020 Vision - Posters and Abstracts

    International Nuclear Information System (INIS)

    Baker, M.L.; Bocian, A.; Bousige, C.; Cermak, P.; Cooper, J.F.K.; Cronenberg, G.; Ford, S.; Hennig, M.; Jones, A.O.F.; Knoll, W.; Leung, K.; Mourigal, M.; Sigrist, M.S.; Trapp, M.; Wang, Weiwei; Martinez Pena, J.L.; Ruegg, C.; Bramwell, S.; Klotz, S.; Fragneto, G.; Fouquet, P.; Nesvizhevsky, V.V.; Harrison, A.; Andersen, K.; Lelievre-Berna, E.; Schober, H.; Enderle, M.; Jobic, H.; Wilson, C.C.; Teschner, D.; Bourges, P.; Braden, M.; McMorrow, D.; Snogerup Linse, S.; Podjarny, A.; Richardson, J.; Schurtenberger, P.; Farago, B.; Pfrang, C.; Simpson, G.; Plonka-Spehr, C.; Nuttall, W.J.; Chapon, L.C.; Koza, M.M.; Withers, P.J.; Zabel, H.; Lyonnard, S.; Morineau, D.; Salmon, P.S.; Johnson, M.; Forsyth, T.; Wagner, R.

    2011-01-01

    The aim of the Millennium Programme is to maintain and develop the ILL's instrument suite as the world reference, as well as to upgrade our support facilities and basic neutron technologies so that they continue to satisfy changing demands from the user community. This document gathers the abstracts of the poster session and the paper abstracts. The posters present the latest achievements in the application of neutrons diffraction for instance to the dynamics of molecules or the study of magnetism. The topics of the papers is more about the need for new equipment than about research topics. The proposals for new or upgraded equipment includes neutron spin-echo spectrometers, multimodal diffractometers, time-of-flight spectrometers, small angle neutron spectrometers, and high magnetic field devices for spectroscopy

  10. The abstract representations in speech processing.

    Science.gov (United States)

    Cutler, Anne

    2008-11-01

    Speech processing by human listeners derives meaning from acoustic input via intermediate steps involving abstract representations of what has been heard. Recent results from several lines of research are here brought together to shed light on the nature and role of these representations. In spoken-word recognition, representations of phonological form and of conceptual content are dissociable. This follows from the independence of patterns of priming for a word's form and its meaning. The nature of the phonological-form representations is determined not only by acoustic-phonetic input but also by other sources of information, including metalinguistic knowledge. This follows from evidence that listeners can store two forms as different without showing any evidence of being able to detect the difference in question when they listen to speech. The lexical representations are in turn separate from prelexical representations, which are also abstract in nature. This follows from evidence that perceptual learning about speaker-specific phoneme realization, induced on the basis of a few words, generalizes across the whole lexicon to inform the recognition of all words containing the same phoneme. The efficiency of human speech processing has its basis in the rapid execution of operations over abstract representations.

  11. Technology of ceramic and polymeric membranes for oil/water separation; Tecnologia de membranas ceramicas e polimericas para separacao oleo/agua

    Energy Technology Data Exchange (ETDEWEB)

    Silva, A.A; Souto, K.M; Silva, Adriano A.; Lira, H.L.; Carvalho, L.H.; Costa, A.C.F.M. [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

    2004-07-01

    In last years, separation techniques by membranes and membranes grew of a laboratory simple tool for an industrial process with a considerable technical and commercial impact. Today, membranes have been being widely used in the treatment of the oily/water, because they offer chemical, thermal resistance and resistance the pressure for a wide variety of alimentation terms. Membrane can be defined as a barrier that separates two phases and that restricts, total or partially, the transportation of one or several present chemical species in the phases. The morphology of the membrane and nature of the material that constitutes are some characteristics that are going to define application kind. The ideal structure for these filters is the asymmetric, formed by one or more layers of different pores size, with gradual reduction of the pores size, when approaches the side filtrate. Having in mind that the environmental legislations more process with membranes offers a new option to face these challenges. The membranes typically used in the oil and water separation act as a barrier for the emulsified oil and solubilization. In the petroleum production and refined oil water mixed with oil is prosecuted in great volumes in lots of processes, this mixture should be treated to separate the oil of water before it can return to the environment or even to be reused in the process. This review aims relate studies done with ceramic and polymeric membranes using a separation oil/water system mounted in laboratory scale in UFCG/CCT/ANP/PHH25. The results show that filtration membranes, micro filtration and ultrafiltration were very effective in oil/water separation. (author)

  12. Investigations and researches on CO2 balance in a high-temperature carbon dioxide separation technology; Nisanka tanso koon bunri gijutsu ni okeru CO2 balance ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With an objective to select a promising process by comparing application environments and effectiveness of a high-temperature carbon dioxide separation, recovery and re-utilization technology with other methods, investigations were performed on reducible amount of carbon dioxide discharge by using material balance and system introduction. A large number of chemical and physical technologies are being developed for the separation and refining methods. This paper discusses the technologies for their application to iron and steel making, oil refining, and petrochemical industries, the so-called heavy and large product industries. As a possibility of utilizing the high-temperature separated CO2 in iron and steel making, an investigation was given on the direct iron ore smelting reduction process. It would be unreasonable to use CO2 in oil refining as a substitute to air to regenerate a catalytic decomposition and reformation catalyst because of decline in the catalytic activity. A discussion was given on a case to replace steam with CO2 in steam reformation and pyrolysis of hydrocarbons. The discussion requires the objective to be focused on such items as C/H ratio at a reformer outlet and relationship of balance in decomposition products. The C1 chemical and others were reviewed to search possibilities for their use as raw materials of chemicals used in chemical industries. Possibilities were discussed to fix high-temperature CO2 into peridotite and serpentine. 42 refs., 32 figs., 11 tabs.

  13. Mechanical Engineering Department technical abstracts

    Energy Technology Data Exchange (ETDEWEB)

    1984-07-01

    The Mechanical Engineering Department publishes abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). General information about the current role and activities of each of the Department's seven divisions precedes the technical abstracts. Further information about a division's work may be obtained from the division leader, whose name is given at the end of each divisional summary. The Department's seven divisions are as follows: Nuclear Test Engineering Division, Nuclear Explosives Engineering Division, Weapons Engineering Division, Energy Systems Engineering Division, Engineering Sciences Division, Magnetic Fusion Engineering Division and Materials Fabrication Division.

  14. Mechanical Engineering Department technical abstracts

    International Nuclear Information System (INIS)

    1984-01-01

    The Mechanical Engineering Department publishes abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). General information about the current role and activities of each of the Department's seven divisions precedes the technical abstracts. Further information about a division's work may be obtained from the division leader, whose name is given at the end of each divisional summary. The Department's seven divisions are as follows: Nuclear Test Engineering Division, Nuclear Explosives Engineering Division, Weapons Engineering Division, Energy Systems Engineering Division, Engineering Sciences Division, Magnetic Fusion Engineering Division and Materials Fabrication Division

  15. Elements of abstract harmonic analysis

    CERN Document Server

    Bachman, George

    2013-01-01

    Elements of Abstract Harmonic Analysis provides an introduction to the fundamental concepts and basic theorems of abstract harmonic analysis. In order to give a reasonably complete and self-contained introduction to the subject, most of the proofs have been presented in great detail thereby making the development understandable to a very wide audience. Exercises have been supplied at the end of each chapter. Some of these are meant to extend the theory slightly while others should serve to test the reader's understanding of the material presented. The first chapter and part of the second give

  16. Abstracts from Rambam Research Day

    Directory of Open Access Journals (Sweden)

    Shraga Blazer

    2015-01-01

    Full Text Available [Extract] This Supplement of Rambam Maimonides Medical Journal presents the abstracts from the Eleventh Rambam Research Day. These abstracts represent the newest basic and clinical research coming out of Rambam Health Care Campus—research that is the oxygen for education and development of today’s generation of physicians. Hence, the research presented on Rambam Research Day is a foundation for future generations to understand patient needs and improve treatment modalities. Bringing research from the bench to the bedside and from the bedside to the community is at the heart of Maimonides’ scholarly and ethical legacy.

  17. Experimental and modelling studies on continuous synthesis and refining of biodiesel in a dedicated bench scale unit using centrifugal contactor separator technology

    NARCIS (Netherlands)

    Abduh, Muhammad Yusuf; Martinez, Alberto Fernandez; Kloekhorst, Arjan; Manurung, Robert; Heeres, Hero J.

    Continuous synthesis and refining of biodiesel (FAME) using a laboratory scale bench scale unit was explored. The unit consists of three major parts: (i) a continuous centrifugal contactor separator (CCCS) to perform the reaction between sunflower oil and methanol; (ii) a washing unit for the crude

  18. Isotope separation

    International Nuclear Information System (INIS)

    Bett, R.; Sims, H.E.; Cuninghame, J.G.

    1983-01-01

    sup(195m)Au is separated from sup(195m)Hg in a solution containing ions of sup(195m)Hg, wherein sup(195m)Au is generated by radioactive decay of the sup(195m)Hg, by contacting the solution with an adsorbing agent to adsorb the sup(195m)Hg as Hg ++ ions followed by elution of sup(195m)Au arising from said radioactive decay. The adsorbing agent is 3-thio-2-hydroxypropyl-ether-Sepharose (R.T.M.); sup(195m)Au may be prepared in this way in a medical isotope generator and is suitable for use in gamma-scan studies of heart action. (author)

  19. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  20. Information Technology

    Science.gov (United States)

    2003-01-01

    The first wave delivered a range of services to most areas of the world through a vast, carefully constructed global network. Cellular technology ...Information Technology and Services Alliance. Digital Planet 2002: The Global Information Economy. February 2002. Yegyazarian, Anush. Sales Taxes...Information Technology ABSTRACT: The information technology (IT) industry affects virtually every industry in the n economy. During the late 90

  1. 1. National Congress of Environmental Science: Abstracts

    International Nuclear Information System (INIS)

    1995-01-01

    The First National Congress of Environmental Sciences had a plural participation in the environmental thematic. The public universities and the research institutes of the different states of Mexico submitted papers containing proposals of scientific and technological solutions to the problems of management of hazardous wastes: water and land pollution; new methods of evaluation to pollutants of air and water; protection and conservation of relevant species of the ecology; control of genetic alterations; development and conservation of natural resources, and environmental education. Another part of the abstracts is dedicated to the posters session (Author)

  2. Exploiting the systematic review protocol for classification of medical abstracts.

    Science.gov (United States)

    Frunza, Oana; Inkpen, Diana; Matwin, Stan; Klement, William; O'Blenis, Peter

    2011-01-01

    To determine whether the automatic classification of documents can be useful in systematic reviews on medical topics, and specifically if the performance of the automatic classification can be enhanced by using the particular protocol of questions employed by the human reviewers to create multiple classifiers. The test collection is the data used in large-scale systematic review on the topic of the dissemination strategy of health care services for elderly people. From a group of 47,274 abstracts marked by human reviewers to be included in or excluded from further screening, we randomly selected 20,000 as a training set, with the remaining 27,274 becoming a separate test set. As a machine learning algorithm we used complement naïve Bayes. We tested both a global classification method, where a single classifier is trained on instances of abstracts and their classification (i.e., included or excluded), and a novel per-question classification method that trains multiple classifiers for each abstract, exploiting the specific protocol (questions) of the systematic review. For the per-question method we tested four ways of combining the results of the classifiers trained for the individual questions. As evaluation measures, we calculated precision and recall for several settings of the two methods. It is most important not to exclude any relevant documents (i.e., to attain high recall for the class of interest) but also desirable to exclude most of the non-relevant documents (i.e., to attain high precision on the class of interest) in order to reduce human workload. For the global method, the highest recall was 67.8% and the highest precision was 37.9%. For the per-question method, the highest recall was 99.2%, and the highest precision was 63%. The human-machine workflow proposed in this paper achieved a recall value of 99.6%, and a precision value of 17.8%. The per-question method that combines classifiers following the specific protocol of the review leads to better

  3. Abstract Interpretation of Mobile Ambients

    DEFF Research Database (Denmark)

    Hansen, René Rydhof; Jensen, J. G.; Nielson, Flemming

    1999-01-01

    We demonstrate that abstract interpretation is useful for analysing calculi of computation such as the ambient calculus (which is based on the p-calculus); more importantly, we show that the entire development can be expressed in a constraint-based formalism that is becoming exceedingly popular...

  4. Abstract Résumé

    African Journals Online (AJOL)

    Abstract. To describe the infant feeding practices in the general population in Uganda, and to assess the impact of maternal HIV status on these ... to-child transmission of HIV should re-enforce counselling activities to address the issue of early weaning by HIV-infected women, ..... A study in Zimbabwe yielded similar results,.

  5. Biocards and Level of Abstraction

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Keshwani, Sonal; Chakrabarti, Amaresh

    2015-01-01

    Biocards are formal descriptions of biological phenomena and their underlying functional principles. They are used in bioinspired design to document search results and to communicate the findings for use in the further design process. The present study explored the effect of abstraction level use...

  6. Abstract Résumé

    African Journals Online (AJOL)

    1 juil. 2013 ... Abstract. In Senegal, where HIV prevalence is less than 1% and stigma remains important, 40% of marriages are polygamic. The purpose of this article is to describe and analyze the motivations, benefits and constraints related to HIV disclosure, and to explore specific situations related to polygamy.

  7. Metaphoric Images from Abstract Concepts.

    Science.gov (United States)

    Vizmuller-Zocco, Jana

    1992-01-01

    Discusses children's use of metaphors to create meaning, using as an example the pragmatic and "scientific" ways in which preschool children explain thunder and lightning to themselves. Argues that children are being shortchanged by modern scientific notions of abstractness and that they should be encouraged to create their own explanations of…

  8. The Complexity of Abstract Machines

    Directory of Open Access Journals (Sweden)

    Beniamino Accattoli

    2017-01-01

    Full Text Available The lambda-calculus is a peculiar computational model whose definition does not come with a notion of machine. Unsurprisingly, implementations of the lambda-calculus have been studied for decades. Abstract machines are implementations schema for fixed evaluation strategies that are a compromise between theory and practice: they are concrete enough to provide a notion of machine and abstract enough to avoid the many intricacies of actual implementations. There is an extensive literature about abstract machines for the lambda-calculus, and yet—quite mysteriously—the efficiency of these machines with respect to the strategy that they implement has almost never been studied. This paper provides an unusual introduction to abstract machines, based on the complexity of their overhead with respect to the length of the implemented strategies. It is conceived to be a tutorial, focusing on the case study of implementing the weak head (call-by-name strategy, and yet it is an original re-elaboration of known results. Moreover, some of the observation contained here never appeared in print before.

  9. Rolloff Roof Observatory Construction (Abstract)

    Science.gov (United States)

    Ulowetz, J. H.

    2015-12-01

    (Abstract only) Lessons learned about building an observatory by someone with limited construction experience, and the advantages of having one for imaging and variable star studies. Sample results shown of composite light curves for cataclysmic variables UX UMa and V1101 Aql with data from my observatory combined with data from others around the world.

  10. Abstract Expressionism. Clip and Save.

    Science.gov (United States)

    Hubbard, Guy

    2002-01-01

    Provides information on the art movement, Abstract Expressionism, and includes learning activities. Focuses on the artist Jackson Pollock, offering a reproduction of his artwork, "Convergence: Number 10." Includes background information on the life and career of Pollock and a description of the included artwork. (CMK)

  11. Original Abstracts - Supplementary | Conference Contributors ...

    African Journals Online (AJOL)

    All abstracts from the The Annual Medical Research Day (AMRD) held at the University of Zimbabwe. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about ...

  12. Some thoughts on separation control strategies

    Indian Academy of Sciences (India)

    process could lead to effective control/management. Keywords. Boundary layer separation; separation control; separation control strategy. 1. Introduction. The problem of boundary-layer separation has attracted considerable attention over several decades, both because of fundamental flow physics and technological ...

  13. MicroCar 2003. Abstracts of papers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    Mechatronics for automotive applications is an important trend, combining mechanics, electronics and information technology. Micro- and nanomechatronics, particularly innovative research disciplines, will help create, in combination with advanced solutions from microsystem technologies, e.g. the electronic packaging, a range of entirely new developments in automobiles. Under the umbrella of the Automotive Suppliers Fair Z2003, it is happening for the very first time now that a momentous scientific conference, such as the MicroCar 2003, brings together representatives from car manufacturers and the electronics industry, as well as a large number of experts from technical colleges, universities and research institutes to discuss the new potentials and possibilities presented by the use of micro and nanomaterials in Leipzig. With the presentation of 50 papers, speakers will inform about their latest research results as well as current trends in micro and nanotechnologies for automotives. This issue is publishing the abstracts of this scientific event.

  14. Separable metrics and radiating stars

    Indian Academy of Sciences (India)

    2016-12-14

    Dec 14, 2016 ... Abstract. We study the junction condition relating the pressure to heat flux at the boundary of an accelerating and expanding spherically symmetric radiating star. We transform the junction condition to an ordinary differ- ential equation by making a separability assumption on the metric functions in the ...

  15. 5. conference of the physicists of Moldova. Abstracts

    International Nuclear Information System (INIS)

    2014-10-01

    This book includes abstracts on various aspects of: materials processing and characterization, crystal growth methods, solid-state and crystal technology, development of condensed matter theory and modeling of materials properties, solid-state device physics, nano science and nano technology, heterostructures, superlattices, quantum wells and wires, advanced quantum physics for nano systems, etc.

  16. Efficient separations & processing crosscutting program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    The Efficient Separations and Processing Crosscutting Program (ESP) was created in 1991 to identify, develop, and perfect chemical and physical separations technologies and chemical processes which treat wastes and address environmental problems throughout the DOE complex. The ESP funds several multiyear tasks that address high-priority waste remediation problems involving high-level, low-level, transuranic, hazardous, and mixed (radioactive and hazardous) wastes. The ESP supports applied research and development (R & D) leading to the demonstration or use of these separations technologies by other organizations within the Department of Energy (DOE), Office of Environmental Management.

  17. Study on Yen Phu rare earth ore concentrate treatment technology and separation of major heavy rare earth elements by solvent extraction method

    International Nuclear Information System (INIS)

    Le Ba Thuan; Pham Quang Trung; Vu Lap Lai

    2003-01-01

    1. Yenphu rare earth ore concentrate treatment by alkali under pressure: On the base of studying mineral and chemical compositions of Yenphu rare earth ore concentrate containing 28% TREO and conditions for digestion of ore concentrate by alkali under pressure such as ore concentrate/ NaOH ratio, alkali concentration, pressure and temperature at bench scale (100 gram and 5 kg per batch), the optimal conditions for decomposition of REE ore concentrate have been determined. The yield of the decomposition stage is about 90%. The studies on alkali washing, REE leaching by HCl, pH for leaching process, and iron and radioactive impurities removing by Na 2 S + Na 2 PO 4 have been carried out. The obtained results show that mixture of Na 2 S 5% + Na2PO 4 1% is effective in iron and radioactive impurities removing. The obtained REE oxides get purity of > 99% and meet the need of solvent extraction (SX) individual separation of rare earth elements. The schema for recovery of REEs from Yenphu REE ore concentrate by alkali decomposition under high pressure has been proposed. 2. Fractionation of Yenphu rare earth mixture into subgroups by solvent extraction with PC88A: On the base of simulation program, the parameters for fractional process of rare earths mixture into subgroups by solvent extraction with PC88A have been proposed and determined by experimental verification on mixer-settler set. According to this process, rare earths mixture fractionated into yttrium and light subgroups. In their turn, the light subgroup was separated into light (La, Ce, Pr, Nd) and middle (Sm, Eu, Gd) subgroups. The average yield of the process reached value > 95%. The composition of light subgroup meets the needs for individual separation of Gd, Eu, and Sm. 3. Separation and purification of yttrium: The process for recovery of yttrium consists of two stages: upgrade to get high quality Y concentrate by PC88A and purification by Aliquat 336 in NH 4 SCN-NH 4 Cl medium. The process parameter for

  18. Implementation of immunomagnetic separation (IMS) for the enrichment and automated detection of bacterial contaminants in flow through lab on the chip technology

    DEFF Research Database (Denmark)

    Ahmed, Shakil

    Due to an increased public concern for food safety and quality, food processing industries have an urgent need for fast and reliable contaminant detection technologies. Conventional pathogen detection methods are time consuming, cost intensive, require skilled laboratory workers and are inappropr...... and detect pathogens in food, feed or beverage industries in real-time and has the potential to offer significant advantages compared to conventional systems.......Due to an increased public concern for food safety and quality, food processing industries have an urgent need for fast and reliable contaminant detection technologies. Conventional pathogen detection methods are time consuming, cost intensive, require skilled laboratory workers...

  19. Abstract Cauchy problems three approaches

    CERN Document Server

    Melnikova, Irina V

    2001-01-01

    Although the theory of well-posed Cauchy problems is reasonably understood, ill-posed problems-involved in a numerous mathematical models in physics, engineering, and finance- can be approached in a variety of ways. Historically, there have been three major strategies for dealing with such problems: semigroup, abstract distribution, and regularization methods. Semigroup and distribution methods restore well-posedness, in a modern weak sense. Regularization methods provide approximate solutions to ill-posed problems. Although these approaches were extensively developed over the last decades by many researchers, nowhere could one find a comprehensive treatment of all three approaches.Abstract Cauchy Problems: Three Approaches provides an innovative, self-contained account of these methods and, furthermore, demonstrates and studies some of the profound connections between them. The authors discuss the application of different methods not only to the Cauchy problem that is not well-posed in the classical sense, b...

  20. Learning abstract algebra with ISETL

    CERN Document Server

    Dubinsky, Ed

    1994-01-01

    Most students in abstract algebra classes have great difficulty making sense of what the instructor is saying. Moreover, this seems to remain true almost independently of the quality of the lecture. This book is based on the constructivist belief that, before students can make sense of any presentation of abstract mathematics, they need to be engaged in mental activities which will establish an experiential base for any future verbal explanation. No less, they need to have the opportunity to reflect on their activities. This approach is based on extensive theoretical and empirical studies as well as on the substantial experience of the authors in teaching astract algebra. The main source of activities in this course is computer constructions, specifically, small programs written in the mathlike programming language ISETL; the main tool for reflections is work in teams of 2-4 students, where the activities are discussed and debated. Because of the similarity of ISETL expressions to standard written mathematics...