Journal of Applied Science, Engineering and Technology: Editorial ...

African Journals Online (AJOL)

Focus and Scope. Journal of Applied Science Engineering and Technology accepts and publishes articles on Engineering, Physical Sciences and all fields of Technology and Biotechnology. It is published twice a year by the FACULTY OF TECHNOLOGY, UNIVERSITY OF IBADAN, IBADAN, NIGERIA. The journal covers ...

Applied technology center business plan and market survey

Science.gov (United States)

Hodgin, Robert F.; Marchesini, Roberto

1990-01-01

Business plan and market survey for the Applied Technology Center (ATC), computer technology transfer and development non-profit corporation, is presented. The mission of the ATC is to stimulate innovation in state-of-the-art and leading edge computer based technology. The ATC encourages the practical utilization of late-breaking computer technologies by firms of all variety.

Applying Digital Sensor Technology: A Problem-Solving Approach

Science.gov (United States)

Seedhouse, Paul; Knight, Dawn

2016-01-01

There is currently an explosion in the number and range of new devices coming onto the technology market that use digital sensor technology to track aspects of human behaviour. In this article, we present and exemplify a three-stage model for the application of digital sensor technology in applied linguistics that we have developed, namely,…

Recent developments in smart freezing technology applied to fresh foods.

Science.gov (United States)

Xu, Ji-Cheng; Zhang, Min; Mujumdar, Arun S; Adhikari, Benu

2017-09-02

Due to the increased awareness of consumers in sensorial and nutritional quality of frozen foods, the freezing technology has to seek new and innovative technologies for better retaining the fresh like quality of foods. In this article, we review the recent developments in smart freezing technology applied to fresh foods. The application of these intelligent technologies and the associated underpinning concepts have greatly improved the quality of frozen foods and the freezing efficiency. These technologies are able to automatically collect the information in-line during freezing and help control the freezing process better. Smart freezing technology includes new and intelligent technologies and concepts applied to the pretreatment of the frozen product, freezing processes, cold chain logistics as well as warehouse management. These technologies enable real-time monitoring of quality during the freezing process and help improve product quality and freezing efficiency. We also provide a brief overview of several sensing technologies used to achieve automatic control of individual steps of freezing process. These sensing technologies include computer vision, electronic nose, electronic tongue, digital simulation, confocal laser, near infrared spectroscopy, nuclear magnetic resonance technology and ultrasound. Understanding of the mechanism of these new technologies will be helpful for applying them to improve the quality of frozen foods.

Applying Technology to Unmet Needs. Technology and the American Economy, Appendix, Volume V.

Science.gov (United States)

National Commission on Technology, Automation and Economic Progress, Washington, DC.

Twelve studies dealing with the problems of applying technology to unmet human and community needs are presented. "Urban Planning and Metropolitan Development--The Role of Technology," examines the possibilities of the computer and other modern planning tools. "Technology, Automation, and Economic Progress in Housing and Urban Development"…

Virtual Laboratory Enabling Collaborative Research in Applied Vehicle Technologies

Science.gov (United States)

Lamar, John E.; Cronin, Catherine K.; Scott, Laura E.

2005-01-01

The virtual laboratory is a new technology, based on the internet, that has had wide usage in a variety of technical fields because of its inherent ability to allow many users to participate simultaneously in instruction (education) or in the collaborative study of a common problem (real-world application). The leadership in the Applied Vehicle Technology panel has encouraged the utilization of this technology in its task groups for some time and its parent organization, the Research and Technology Agency, has done the same for its own administrative use. This paper outlines the application of the virtual laboratory to those fields important to applied vehicle technologies, gives the status of the effort, and identifies the benefit it can have on collaborative research. The latter is done, in part, through a specific example, i.e. the experience of one task group.

Applied Welding Technology. Technical Committee Report.

Science.gov (United States)

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in applied welding technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are…

Electronic-projecting Moire method applying CBR-technology

Science.gov (United States)

Kuzyakov, O. N.; Lapteva, U. V.; Andreeva, M. A.

2018-01-01

Electronic-projecting method based on Moire effect for examining surface topology is suggested. Conditions of forming Moire fringes and their parameters’ dependence on reference parameters of object and virtual grids are analyzed. Control system structure and decision-making subsystem are elaborated. Subsystem execution includes CBR-technology, based on applying case base. The approach related to analysing and forming decision for each separate local area with consequent formation of common topology map is applied.

34 CFR 403.1 - What is the State Vocational and Applied Technology Education Program?

Science.gov (United States)

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What is the State Vocational and Applied Technology... TECHNOLOGY EDUCATION PROGRAM General § 403.1 What is the State Vocational and Applied Technology Education Program? (a) Under the State Vocational and Applied Technology Education Program, the Secretary makes...

Applying Trusted Network Technology To Process Control Systems

Science.gov (United States)

Okhravi, Hamed; Nicol, David

Interconnections between process control networks and enterprise networks expose instrumentation and control systems and the critical infrastructure components they operate to a variety of cyber attacks. Several architectural standards and security best practices have been proposed for industrial control systems. However, they are based on older architectures and do not leverage the latest hardware and software technologies. This paper describes new technologies that can be applied to the design of next generation security architectures for industrial control systems. The technologies are discussed along with their security benefits and design trade-offs.

Recent developments in novel freezing and thawing technologies applied to foods.

Science.gov (United States)

Wu, Xiao-Fei; Zhang, Min; Adhikari, Benu; Sun, Jincai

2017-11-22

This article reviews the recent developments in novel freezing and thawing technologies applied to foods. These novel technologies improve the quality of frozen and thawed foods and are energy efficient. The novel technologies applied to freezing include pulsed electric field pre-treatment, ultra-low temperature, ultra-rapid freezing, ultra-high pressure and ultrasound. The novel technologies applied to thawing include ultra-high pressure, ultrasound, high voltage electrostatic field (HVEF), and radio frequency. Ultra-low temperature and ultra-rapid freezing promote the formation and uniform distribution of small ice crystals throughout frozen foods. Ultra-high pressure and ultrasound assisted freezing are non-thermal methods and shorten the freezing time and improve product quality. Ultra-high pressure and HVEF thawing generate high heat transfer rates and accelerate the thawing process. Ultrasound and radio frequency thawing can facilitate thawing process by volumetrically generating heat within frozen foods. It is anticipated that these novel technologies will be increasingly used in food industries in the future.

Technological innovation applied to walmart and tesco’s supply chain

OpenAIRE

Heller, Fabiano

2017-01-01

This paper aims to analyze technological innovation applied to retailing supply chain. The research consisted of a brief overview of the state of current technologies and their development throughout time, as well as recent trials and perspectives of advancements for the future. Further, an analysis of two specific retailers – Walmart and Tesco – was performed to identify and address where such innovations are being applied in real scenarios, ultimately revealing opportunities for a streamlin...

Overview of remote technologies applied to research reactor fuel

International Nuclear Information System (INIS)

Oerdoegh, M.; Takats, F.

1999-01-01

This paper gives a brief overview of the remote technologies applied to research reactor fuels. Due to many reasons, the remote technology utilization to research reactor fuel is not so widespread as it is for power reactor fuels, however, the advantages of the application of such techniques are obvious. (author)

KINERJA PENGELOLAAN LIMBAH HOTEL PESERTA PROPER DAN NON PROPER DI KABUPATEN BADUNG, PROVINSI BALI

Directory of Open Access Journals (Sweden)

Putri Nilakandi Perdanawati Pitoyo

2016-07-01

Full Text Available Bali tourism development can lead to positive and negative impacts that threatening environmental sustainability. This research evaluates the hotel performance of the waste management that includes management of waste water, emission, hazardous, and solid waste by hotel that participate at PROPER and non PROPER. Research using qualitative descriptive method. Not all of non PROPER doing test on waste water quality, chimney emissions quality, an inventory of hazardous waste and solid waste sorting. Wastewater discharge of PROPER hotels ranged from 290.9 to 571.8 m3/day and non PROPER ranged from 8.4 to 98.1 m3/day with NH3 parameter values that exceed the quality standards. The quality of chimney emissions were still below the quality standard. The volume of the hazardous waste of PROPER hotels ranged from 66.1 to 181.9 kg/month and non PROPER ranged from 5.003 to 103.42 kg/month. Hazardous waste from the PROPER hotel which has been stored in the TPS hazardous waste. The volume of the solid waste of PROPER hotel ranged from 342.34 to 684.54 kg/day and non PROPER ranged from 4.83 to 181.51 kg/day. The PROPER and non PROPER hotel not sort the solid waste. The hotel performance in term of wastewater management, emission, hazardous, and solid waste is better at the PROPER hotel compared to non PROPER participants.

UNIVERSITY TEACHERS’ READINESS TO APPLY THE MODERN EDUCATIONAL TECHNOLOGIES

Directory of Open Access Journals (Sweden)

Irina O. Kotlyarova

2015-01-01

Full Text Available The aim of the research is to investigate the readiness of the university teachers to apply the modern educational technologies. Methods. The methods include theoretical: analysis of existing modern educational technologies, the concept «readiness» and its components, abstraction of signs and kinds of modern educational technologies based on the scientific literature and in the Federal State Educational Standards (FSES; empirical: questionnaires and testing methods for detecting levels of university teachers’ skills and readiness to use modern educational technology. Results. The main features of modern educational technologies are identified and justified that are to comply with modern methodology of the theory and practice of education study and the latest FSES requirements; the level of science, manufacturing, and modern rules of human relations. The components of readiness of university teachers to use modern educational technology are structured. The linguistic component is included along with the cognitive, psychological, operational, connotative components; its necessity is proved. The average level of readiness for the use of modern educational technology by university teachers is identified. Scientific novelty. The author specifies the features of the modern educational technology. The most significant components of higher-education teaching personnel readiness to use technological innovations are identified. As a whole, these results form the indicative framework for the development and measurement of readiness of the university teachers to use the modern educational technology. The development of the readiness of the university teachers to apply the modern educational technologies is proved to be an issue of current interest. Practical significance. The research findings can be used as the basis of techniques and methods designing for its further development and measurement of the training, retraining and advanced training of

Smart storage technologies applied to fresh foods: A review.

Science.gov (United States)

Wang, Jingyu; Zhang, Min; Gao, Zhongxue; Adhikari, Benu

2017-06-30

Fresh foods are perishable, seasonal and regional in nature and their storage, transportation, and preservation of freshness are quite challenging. Smart storage technologies can online detection and monitor the changes of quality parameters and storage environment of fresh foods during storage, so that operators can make timely adjustments to reduce the loss. This article reviews the smart storage technologies from two aspects: online detection technologies and smartly monitoring technologies for fresh foods. Online detection technologies include electronic nose, nuclear magnetic resonance (NMR), near infrared spectroscopy (NIRS), hyperspectral imaging and computer vision. Smartly monitoring technologies mainly include some intelligent indicators for monitoring the change of storage environment. Smart storage technologies applied to fresh foods need to be highly efficient and nondestructive and need to be competitively priced. In this work, we have critically reviewed the principles, applications, and development trends of smart storage technologies.

Cloud computing technologies applied in the virtual education of civil servants

Directory of Open Access Journals (Sweden)

Teodora GHERMAN

2016-03-01

Full Text Available From the perspective of education, e-learning through the use of Cloud Computing technologies represent one of the most important directions of educational software development, because Cloud Computing are in a rapid development and applies to all areas of the Information Society, including education. Systems require resources for virtual education on web platform (e-learning numerous hardware and software. The convenience of Internet learning, creating a learning environment based on web has become one of the strengths in virtual education research, including applied Cloud Computing technologies in virtual education of civil servants. The article presents Cloud Computing technologies as a platform for virtual education on web platforms, their advantages and disadvantages towards other technologies.

Applying Social Capital Theory and the Technology Acceptance ...

African Journals Online (AJOL)

Applying Social Capital Theory and the Technology Acceptance Model in information and knowledge sharing research. ... Inkanyiso: Journal of Humanities and Social Sciences ... The paper explains the components, relevance and practical applicability of the two theories to information and knowledge sharing research.

Environmental restoration/waste management-applied technology semiannual report, January--June 1992

International Nuclear Information System (INIS)

Adamson, M.; Kline-Simon, K.

1992-01-01

This is the first issue from the Lawrence Livermore National Laboratory of The Environmental Restoration/Waste Management-Applied Technology (ER/WM-AT) Semiannual Report, a continuation of the Advanced Processing Technology (APT) Semiannual Report. The name change reflects the consolidation of the APT Program with the Environmental Restoration and Waste Management Program to form the Environmental Restoration/Waste Management-Applied Technology (ER/WM-AT) Program. The Livermore site mirrors, on a small scale, many of the environmental and waste management problems of the DOE Complex. The six articles in this issue cover incineration- alternative technologies, process development for waste minimization, the proposed Mixed Waste Management Facility, dynamic underground stripping, electrical resistance tomography, and Raman spectroscopy for remote characterization of underground tanks

Applying environmental externalities to US Clean Coal Technologies for Asia

International Nuclear Information System (INIS)

Szpunar, C.B.; Gillette, J.L.

1993-01-01

The United States is well positioned to play an expanding role in meeting the energy technology demands of the Asian Pacific Basin, including Indonesia, Thailand, and the Republic of China (ROC-Taiwan). The US Department of Energy Clean Coal Technology (CCT) Demonstration Program provides a proving ground for innovative coal-related technologies that can be applied domestically and abroad. These innovative US CCTs are expected to satisfy increasingly stringent environmental requirements while substantially improving power generation efficiencies. They should also provide distinct advantages over conventional pulverized coal-fired combustors. Finally, they are expected to be competitive with other energy options currently being considered in the region. This paper presents potential technology scenarios for Indonesia, Thailand, and the ROC-Taiwan and considers an environmental cost-benefit approach employing a newly developed method of applying environmental externalities. Results suggest that the economic benefits from increased emission control can indeed be quantified and used in cost-benefit comparisons, and that US CCTs can be very cost effective in reducing emissions

34 CFR 400.9 - What additional requirements govern the Vocational and Applied Technology Education Programs?

Science.gov (United States)

2010-07-01

... Applied Technology Education Programs? 400.9 Section 400.9 Education Regulations of the Offices of the... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAMS-GENERAL PROVISIONS § 400.9 What additional requirements govern the Vocational and Applied Technology Education Programs? In addition to the Act, applicable...

Proper generalized decompositions an introduction to computer implementation with Matlab

CERN Document Server

Cueto, Elías; Alfaro, Icíar

2016-01-01

This book is intended to help researchers overcome the entrance barrier to Proper Generalized Decomposition (PGD), by providing a valuable tool to begin the programming task. Detailed Matlab Codes are included for every chapter in the book, in which the theory previously described is translated into practice. Examples include parametric problems, non-linear model order reduction and real-time simulation, among others. Proper Generalized Decomposition (PGD) is a method for numerical simulation in many fields of applied science and engineering. As a generalization of Proper Orthogonal Decomposition or Principal Component Analysis to an arbitrary number of dimensions, PGD is able to provide the analyst with very accurate solutions for problems defined in high dimensional spaces, parametric problems and even real-time simulation. .

34 CFR 400.1 - What is the purpose of the Vocational and Applied Technology Education Programs?

Science.gov (United States)

2010-07-01

... Technology Education Programs? 400.1 Section 400.1 Education Regulations of the Offices of the Department of... APPLIED TECHNOLOGY EDUCATION PROGRAMS-GENERAL PROVISIONS § 400.1 What is the purpose of the Vocational and Applied Technology Education Programs? (a) The purpose of the Vocational and Applied Technology Education...

2nd Symposium on applied nuclear physics and innovative technologies

CERN Document Server

2014-01-01

Symposium on Applied Nuclear Physics and Innovative Technologies will be held for the second time at Collegium Maius, the oldest building of the Jagiellonian University in Cracow, the same building where Nicolaus Copernicus has studied astronomy. Symposium is organized in the framework of the MPD programme carried out by the Foundation for Polish science based on the European Structural Funds. The aim of this conference is to gather together young scientists and experts in the field of applied and fundamental nuclear as well as particle physics. Aiming at interplay of fundamental and applied science the conference will be devoted to the following topics: * Medical imaging and radiotherapy * New materials and technologies in radiation detection * Fission, fusion and spallation processes * High-performance signal processing and data analysis * Tests of foundations of physics and search for a new kind of sub-atomic matter

Twisted equivariant K-theory, groupoids and proper actions

OpenAIRE

Cantarero, Jose

2009-01-01

In this paper we define twisted equivariant K-theory for actions of Lie groupoids. For a Bredon-compatible Lie groupoid, this defines a periodic cohomology theory on the category of finite CW-complexes with equivariant stable projective bundles. A classification of these bundles is shown. We also obtain a completion theorem and apply these results to proper actions of groups.

PCARRD's strategies for technology transfer: The agriculture and resources regional technology information system and the regional applied communication program

International Nuclear Information System (INIS)

Stuart, T.H.; Mamon, C.R.

1990-05-01

This paper describes the Agriculture and Resources Regional Technology Information System (ARRTIS) and the Regional Applied Communication Outreach Program (RAC) of PCARRD. The ARRTIS and the RACO are the strategies in communicating scientific and technology-based information. The ARRTIS is an information system that provides an information base on the status of technologies at various levels of maturity (generation, adaptation, verification, piloting, dissemination and utilization) and offers technology alternatives based on environmental requirements, costs and returns analysis or feasibility of the technologies. This information base provides the repository of technology information from which the Applied Communication Program draws its information for packaging into various formats, using various strategies/media to cater to various users in the regions most especially the farmers. Meanwhile, as PCARRD executes its mission of developing the national research system, it incorporates a development support communication program through the RACO. The RACO is essentially a working component of a regional research center/consortium in each region coordinated by the Applied Communication Division of PCARRD. It aims at reaching farmers and their families, extensionists, administrators, policy makers and entrepreneurs with research information and technology which use a variety of appropriate communication channels, modern communication technology and strategies so that they may actively participate in research diffusion and utilization. (author). 7 refs

Pollution control technologies applied to coal-fired power plant operation

Directory of Open Access Journals (Sweden)

Maciej Rozpondek

2009-09-01

Full Text Available Burning of fossil fuels is the major source of energy in today's global economy with over one-third of the world's powergeneration derived from coal combustion. Although coal has been a reliable, abundant, and relatively inexpensive fuel source for mostof the 20th century, its future in electric power generation is under increasing pressure as environmental regulations become morestringent worldwide. Current pollution control technologies for combustion exhaust gas generally treat the release of regulatedpollutants: sulfur dioxide, nitrogen oxides and particulate matter as three separate problems instead of as parts of one problem. Newand improved technologies have greatly reduced the emissions produced per ton of burning coal. The term “Clean Coal CombustionTechnology” applies generically to a range of technologies designed to greatly reduce the emissions from coal-fired power plants.The wet methods of desulfurization at present are the widest applied technology in professional energetics. This method is economicand gives good final results but a future for clean technologies is the biomass. Power from biomass is a proven commercial optionof the electricity generation in the World. An increasing number of power marketers are starting to offer environmentally friendlyelectricity, including biomass power, in response to the consumer demand and regulatory requirements.

First International Symposium on Applied Computing and Information Technology (ACIT 2013)

CERN Document Server

Applied Computing and Information Technology

2014-01-01

This book presents the selected results of the 1st International Symposium on Applied Computers and Information Technology (ACIT 2013) held on August 31 – September 4, 2013 in Matsue City, Japan, which brought together researchers, scientists, engineers, industry practitioners, and students to discuss all aspects of  Applied Computers & Information Technology, and its practical challenges. This book includes the best 12 papers presented at the conference, which were chosen based on review scores submitted by members of the program committee and underwent further rigorous rounds of review.  

Applied photovoltaics as a practical education in renewable energy technologies

International Nuclear Information System (INIS)

Stoev, Mitko

2009-01-01

The optional course „Applied Photovoltaic” for MEng students specializing in Electronics at the Faculty of Electronics and Automation, TU-Plovdiv is presented. The main topics of the advanced PV course as a modern sustainable energetic based on the photovoltaic effect and energy from Sun as a renewable energy source; materials and technologies in photovoltaic; design of solar cells and PV modules and PV generators up to 100 kWp; BIPV and CIPV systems; hybrid PV systems; PV mounting; monitoring of PV systems and EC regulations for PV systems connected to the utility grid are discussed. The advanced teaching method by online e-platform with virtual resources is presented. Key words: PV education, PV technologies, applied photovoltaic, e-platform

Secular Extragalactic Parallax and Geometric Distances with Gaia Proper Motions

Science.gov (United States)

Paine, Jennie; Darling, Jeremiah K.

2018-06-01

The motion of the Solar System with respect to the cosmic microwave background (CMB) rest frame creates a well measured dipole in the CMB, which corresponds to a linear solar velocity of about 78 AU/yr. This motion causes relatively nearby extragalactic objects to appear to move compared to more distant objects, an effect that can be measured in the proper motions of nearby galaxies. An object at 1 Mpc and perpendicular to the CMB apex will exhibit a secular parallax, observed as a proper motion, of 78 µas/yr. The relatively large peculiar motions of galaxies make the detection of secular parallax challenging for individual objects. Instead, a statistical parallax measurement can be made for a sample of objects with proper motions, where the global parallax signal is modeled as an E-mode dipole that diminishes linearly with distance. We present preliminary results of applying this model to a sample of nearby galaxies with Gaia proper motions to detect the statistical secular parallax signal. The statistical measurement can be used to calibrate the canonical cosmological “distance ladder.”

Mobile Technologies and Augmented Reality in Open Education

Science.gov (United States)

Kurubacak, Gulsun, Ed.; Altinpulluk, Hakan, Ed.

2017-01-01

Novel trends and innovations have enhanced contemporary educational environments. When applied properly, these computing advances can create enriched learning opportunities for students. "Mobile Technologies and Augmented Reality in Open Education" is a pivotal reference source for the latest academic research on the integration of…

Fiscal 1998 research report. Popularization project of the proper treatment technology of industrial wastes in Asian regions; 1998 nendo chosa hokokusho. Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Study was made on popularization of the proper treatment technology of industrial wastes in Asian regions. In principle, industrial wastes should be recycled in a country concerned, however, because of a difference in technology and industrial location, treatment of all industrial wastes in a country concerned is impossible. International cooperation is thus indispensable to promote proper efficient practical measures for environment. For studying the possibility of the international cooperation between Japan and Asian countries concerned for further recognition and solution of industrial waste problems, 'International Symposium on the Asian Industrial Waste Issue' have been held in Tokyo since 1997 for governmental staffs. In fiscal 1998, Malaysia was invited in addition to China, Philippines and Thailand for popularization of the proper treatment and recycling of industrial wastes in Asian regions. In every Asian countries, poor collection of discharge, treatment and disposal data is an obstacle to effective treatment. Technical cooperation and financial support by developed countries are demanded. (NEDO)

Fiscal 1998 research report. Popularization project of the proper treatment technology of industrial wastes in Asian regions; 1998 nendo chosa hokokusho. Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Study was made on popularization of the proper treatment technology of industrial wastes in Asian regions. In principle, industrial wastes should be recycled in a country concerned, however, because of a difference in technology and industrial location, treatment of all industrial wastes in a country concerned is impossible. International cooperation is thus indispensable to promote proper efficient practical measures for environment. For studying the possibility of the international cooperation between Japan and Asian countries concerned for further recognition and solution of industrial waste problems, 'International Symposium on the Asian Industrial Waste Issue' have been held in Tokyo since 1997 for governmental staffs. In fiscal 1998, Malaysia was invited in addition to China, Philippines and Thailand for popularization of the proper treatment and recycling of industrial wastes in Asian regions. In every Asian countries, poor collection of discharge, treatment and disposal data is an obstacle to effective treatment. Technical cooperation and financial support by developed countries are demanded. (NEDO)

PCARRD`s strategies for technology transfer: The agriculture and resources regional technology information system and the regional applied communication program

Energy Technology Data Exchange (ETDEWEB)

Stuart, T H; Mamon, C R [Philippine Council for Agriculture, Los Banos, Laguna (Philippines). Forestry and Natural Resources

1990-05-01

This paper describes the Agriculture and Resources Regional Technology Information System (ARRTIS) and the Regional Applied Communication Outreach Program (RAC) of PCARRD. The ARRTIS and the RACO are the strategies in communicating scientific and technology-based information. The ARRTIS is an information system that provides an information base on the status of technologies at various levels of maturity (generation, adaptation, verification, piloting, dissemination and utilization) and offers technology alternatives based on environmental requirements, costs and returns analysis or feasibility of the technologies. This information base provides the repository of technology information from which the Applied Communication Program draws its information for packaging into various formats, using various strategies/media to cater to various users in the regions most especially the farmers. Meanwhile, as PCARRD executes its mission of developing the national research system, it incorporates a development support communication program through the RACO. The RACO is essentially a working component of a regional research center/consortium in each region coordinated by the Applied Communication Division of PCARRD. It aims at reaching farmers and their families, extensionists, administrators, policy makers and entrepreneurs with research information and technology which use a variety of appropriate communication channels, modern communication technology and strategies so that they may actively participate in research diffusion and utilization. (author). 7 refs.

Applying patent information to tracking a specific technology

Directory of Open Access Journals (Sweden)

Chen-Yuan Liu

2007-10-01

Full Text Available Patents in general contain much novel technological information. This paper demonstrates that the usage of patent analysis can facilitate a unique scheme for tracking technology development. In this paper, the walking technique of the Japanese biped robot is tracked as an example. The searching method of the FI (file index and F-term classification system developed by JPO (Japan Patent Office was employed in this study, where all the related patent data were searched from the IPDL (Intellectual Property Digital Library. This study investigated an important technique applied to the humanoid biped robot that imitates the walking behavior of the human beings on two legs. By analyzing the patent information obtained, the relative research capabilities, technical strengths, and patent citation conditions among patent competitors were compared. Furthermore, a formulated technical matrix of patent map is established in this paper to indicate that the ZMP (Zero Moment Point control means is the main technology to achieve stabilized walking control of the humanoid biped robot. This study also incorporates relevant academic journal findings and industrial information. Results presented herein demonstrate that patents can function not only as a map for tracking a technology trajectory, but also as a guide to the main development of a new technology in years to come.

Research and development in technology enriched schools: a case for cooperation between teachers and researchers

NARCIS (Netherlands)

Beishuizen, J.J.; Beishuizen, J.J.; Moonen, J.C.M.M.

1993-01-01

Technology-enriched schools offer unique opportunities for research into the use of information technology in education. As in every applied educational research project, some concerns should be carefully considered. One of them is teacher involvement. Another issue of concern is finding a proper

International Conference of Applied Science and Technology for Infrastructure Engineering

Science.gov (United States)

Elvina Santoso, Shelvy; Hardianto, Ekky

2017-11-01

Preface: International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017. The International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017 has been scheduled and successfully taken place at Swiss-Bell Inn Hotel, Surabaya, Indonesia, on August 5th 2017 organized by Department of Civil Infrastructure Engineering, Faculty of Vocation, Institut Teknologi Sepuluh Nopember (ITS). This annual event aims to create synergies between government, private sectors; employers; practitioners; and academics. This conference has different theme each year and “MATERIAL FOR INFRASTUCTURE ENGINEERING” will be taken for this year’s main theme. In addition, we also provide a platform for various other sub-theme topic including but not limited to Geopolymer Concrete and Materials Technology, Structural Dynamics, Engineering, and Sustainability, Seismic Design and Control of Structural Vibrations, Innovative and Green Buildings, Project Management, Transportation and Highway Engineering, Geotechnical Engineering, Water Engineering and Resources Management, Surveying and Geospatial Engineering, Coastal Engineering, Geophysics, Energy, Electronic and Mechatronic, Industrial Process, and Data Mining. List of Organizers, Journal Editors, Steering Committee, International Scientific Committee, Chairman, Keynote Speakers are available in this pdf.

Feeling-of-knowing for proper names.

Science.gov (United States)

Izaute, Marie; Chambres, Patrick; Larochelle, Serge

2002-12-01

The main objective of the presented study was to study feeling-of-knowing (FOK) in proper name retrieval. Many studies show that FOK can predict performance on a subsequent criterion test. Although feeling-of-knowing studies involve questions about proper names, none make this distinction between proper names and common names. Nevertheless, the specific character of proper names as a unique label referring to a person should allow participants to target precisely the desired verbal label. Our idea here was that the unique character of proper name information should result in more accurate FOK evaluations. In the experiment, participants evaluated feeling-of-knowing for proper and common name descriptions. The study demonstrates that FOK judgments are more accurate for proper names than for common names. The implications of the findings for proper names are briefly discussed in terms of feeling-of-knowing hypotheses.

On Study of Teaching Reform of Organic Chemistry Course in Applied Chemical Industry Technology

Science.gov (United States)

Zhang, Yunshen

2017-11-01

with the implementation of new curriculum reform, the education sees great changes in teaching methods. Teaching reform is profound in organic chemistry course in applied chemical industry technology. However, many problems which have never been noticed before occur when reform programs are implemented which harm students’ ability for learning and enthusiasm in side face. This paper proposes reform measures like combining theory and practice, improving professional quality, supplementing professional needs and integrating teaching into life after analyzing organic chemistry course teaching in applied chemical industry technology currently, hoping to play a role of reference for organic chemistry course teaching reform in applied chemical industry technology.

The Requirement of Being a "Fit and Proper" Person for the Legal Profession

Directory of Open Access Journals (Sweden)

M Slabbert

2011-07-01

Full Text Available An important requirement for admission as an attorney or advocate is to be a "fit and proper" person. Lawyers are also struck from the respective rolls of advocates or attorneys if they cease to be "fit and proper". This requirement of being a "fit and proper" person is not defined or described in legislation. It is left to the subjective interpretation of and application by seniors in the profession and ultimately the court. In the apartheid years this requirement was applied arbitrarily but today the question may be asked why some lawyers who have been found to be "fit and proper" do not act as such. The pre-admission character screening of lawyers seems not to be effective any more. Post- admission moral development is imperative.

Enhancing Teachers' Motivation to Apply Humanist Information Technology Innovations

Science.gov (United States)

Assor, Avi

2009-01-01

This article focuses on the following issue: How can we build a training and support system that would enhance the motivation and capacity of teachers for high-quality implementation of information technology innovations guided by humanist ideas? That is, a system that would not only increase teachers' motivation to apply Humanist Information…

Hanford Waste Vitrification Plant applied technology plan

International Nuclear Information System (INIS)

Kruger, O.L.

1990-09-01

This Applied Technology Plan describes the process development, verification testing, equipment adaptation, and waste form qualification technical issues and plans for resolution to support the design, permitting, and operation of the Hanford Waste Vitrification Plant. The scope of this Plan includes work to be performed by the research and development contractor, Pacific Northwest Laboratory, other organizations within Westinghouse Hanford Company, universities and companies with glass technology expertise, and other US Department of Energy sites. All work described in this Plan is funded by the Hanford Waste Vitrification Plant Project and the relationship of this Plan to other waste management documents and issues is provided for background information. Work to performed under this Plan is divided into major areas that establish a reference process, develop an acceptable glass composition envelope, and demonstrate feed processing and glass production for the range of Hanford Waste Vitrification Plant feeds. Included in this work is the evaluation and verification testing of equipment and technology obtained from the Defense Waste Processing Facility, the West Valley Demonstration Project, foreign countries, and the Hanford Site. Development and verification of product and process models and other data needed for waste form qualification documentation are also included in this Plan. 21 refs., 4 figs., 33 tabs

The transverse index theorem for proper cocompact actions of Lie groupoids

NARCIS (Netherlands)

Pflaum, M.J.; Posthuma, H.; Tang, X.

2015-01-01

Given a proper, cocompact action of a Lie groupoid, we define a higher index pairing between invariant elliptic differential operators and smooth groupoid cohomology classes. We prove a cohomological index formula for this pairing by applying the van Est map and algebraic index theory. Finally we

Doctor-Patient Knowledge Transfer: Innovative Technologies and Policy Implications

OpenAIRE

Sára, Zoltán; Csedő, Zoltán; Tóth, Tamás; Fejes, József; Pörzse, Gábor

2013-01-01

The aim of this study was to empirically investigate the barriers in doctor-patient communication and knowledge transfer and the role of innovative technologies in overcoming these barriers. We applied qualitative research methods. Our results show that patients extensively use information sources, primarily the Internet before the visits. Patients regularly apply a self-diagnosis regarding their diseases. This implies several risks as many of them are not able to properly inte...

Database management systems understanding and applying database technology

CERN Document Server

Gorman, Michael M

1991-01-01

Database Management Systems: Understanding and Applying Database Technology focuses on the processes, methodologies, techniques, and approaches involved in database management systems (DBMSs).The book first takes a look at ANSI database standards and DBMS applications and components. Discussion focus on application components and DBMS components, implementing the dynamic relationship application, problems and benefits of dynamic relationship DBMSs, nature of a dynamic relationship application, ANSI/NDL, and DBMS standards. The manuscript then ponders on logical database, interrogation, and phy

"Seeing is believing": perspectives of applying imaging technology in discovery toxicology.

Science.gov (United States)

Xu, Jinghai James; Dunn, Margaret Condon; Smith, Arthur Russell

2009-11-01

Efficiency and accuracy in addressing drug safety issues proactively are critical in minimizing late-stage drug attritions. Discovery toxicology has become a specialty subdivision of toxicology seeking to effectively provide early predictions and safety assessment in the drug discovery process. Among the many technologies utilized to select safer compounds for further development, in vitro imaging technology is one of the best characterized and validated to provide translatable biomarkers towards clinically-relevant outcomes of drug safety. By carefully applying imaging technologies in genetic, hepatic, and cardiac toxicology, and integrating them with the rest of the drug discovery processes, it was possible to demonstrate significant impact of imaging technology on drug research and development and substantial returns on investment.

Applied wind energy research at the National Wind Technology Center

International Nuclear Information System (INIS)

Robinson, M.C.; Tu, P.

1997-01-01

Applied research activities currently being undertaken at the National Wind Technology Center, part of the National Renewable Energy Laboratory, in the United States, are divided into several technical disciplines. An integrated multi-disciplinary approach is urged for the future in order to evaluate advanced turbine designs. The risk associated with any new turbine development program can thus be mitigated through the provision of the advanced technology, analysis tools and innovative designs available at the Center, and wind power can be promoted as a viable renewable energy alternative. (UK)

Applied reproductive technologies and genetic resource banking for amphibian conservation.

Science.gov (United States)

Kouba, Andrew J; Vance, Carrie K

2009-01-01

As amphibian populations continue to decline, both government and non-government organisations are establishing captive assurance colonies to secure populations deemed at risk of extinction if left in the wild. For the most part, little is known about the nutritional ecology, reproductive biology or husbandry needs of the animals placed into captive breeding programs. Because of this lack of knowledge, conservation biologists are currently facing the difficult task of maintaining and reproducing these species. Academic and zoo scientists are beginning to examine different technologies for maintaining the genetic diversity of founder populations brought out of the wild before the animals become extinct from rapidly spreading epizootic diseases. One such technology is genetic resource banking and applied reproductive technologies for species that are difficult to reproduce reliably in captivity. Significant advances have been made in the last decade for amphibian assisted reproduction including the use of exogenous hormones for induction of spermiation and ovulation, in vitro fertilisation, short-term cold storage of gametes and long-term cryopreservation of spermatozoa. These scientific breakthroughs for a select few species will no doubt serve as models for future assisted breeding protocols and the increasing number of amphibians requiring conservation intervention. However, the development of specialised assisted breeding protocols that can be applied to many different families of amphibians will likely require species-specific modifications considering their wide range of reproductive modes. The purpose of this review is to summarise the current state of knowledge in the area of assisted reproduction technologies and gene banking for the conservation of amphibians.

Larmor time and proper time

Energy Technology Data Exchange (ETDEWEB)

Kudaka, Shoju [Department of Physics, University of the Ryukyus, Okinawa 903-0129 (Japan); Matsumoto, Shuichi, E-mail: shuichi@edu.u-ryukyu.ac.jp [Department of Mathematics, University of the Ryukyus, Okinawa 903-0129 (Japan)

2012-10-01

The idea of a Larmor clock is reexamined in the relativistic regime. We propose a concept of proper time for quantum theoretical particles. The Larmor clock can measure, under some relevant conditions, the proper time that passes while the particle stays in a space region. Our approach to Larmor clock is different than those of other researchers in the following two aspects: our concept of Larmor clock does not distinguish whether the particle is transmitted or reflected at the end of its stay, and pointer of our Larmor clock is not the spin but the total angular momentum. -- Highlights: ► The idea of a Larmor clock is reexamined in the relativistic regime. ► We propose a concept of proper time for quantum theoretical particles. ► The Larmor clock measures the passage of this quantum theoretical proper time.

7 CFR 29.112 - Proper light.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Proper light. 29.112 Section 29.112 Agriculture... INSPECTION Regulations Inspectors, Samplers, and Weighers § 29.112 Proper light. Tobacco shall not be inspected or sampled for the purposes of the Act except when displayed in proper light for correct...

Relativistic quantum metrology: exploiting relativity to improve quantum measurement technologies.

Science.gov (United States)

Ahmadi, Mehdi; Bruschi, David Edward; Sabín, Carlos; Adesso, Gerardo; Fuentes, Ivette

2014-05-22

We present a framework for relativistic quantum metrology that is useful for both Earth-based and space-based technologies. Quantum metrology has been so far successfully applied to design precision instruments such as clocks and sensors which outperform classical devices by exploiting quantum properties. There are advanced plans to implement these and other quantum technologies in space, for instance Space-QUEST and Space Optical Clock projects intend to implement quantum communications and quantum clocks at regimes where relativity starts to kick in. However, typical setups do not take into account the effects of relativity on quantum properties. To include and exploit these effects, we introduce techniques for the application of metrology to quantum field theory. Quantum field theory properly incorporates quantum theory and relativity, in particular, at regimes where space-based experiments take place. This framework allows for high precision estimation of parameters that appear in quantum field theory including proper times and accelerations. Indeed, the techniques can be applied to develop a novel generation of relativistic quantum technologies for gravimeters, clocks and sensors. As an example, we present a high precision device which in principle improves the state-of-the-art in quantum accelerometers by exploiting relativistic effects.

Proper orthogonal decomposition applied to laminar thermal convection in a vertical two plate channel

International Nuclear Information System (INIS)

Alvarez-Herrera, C; Murillo-Ramírez, J G; Pérez-Reyes, I; Moreno-Hernández, D

2015-01-01

This work reports the thermal convection with imposed shear flow in a thin two-plate channel. Flow structures are investigated under heating asymmetric conditions and different laminar flow conditions. The dynamics of heat flow and the energy distribution were determined by visualization with the Schlieren technique and application of the proper orthogonal decomposition (POD) method. The obtained results from the POD mode analysis revealed that for some flow conditions the heat transfer is related to the energy of the POD modes and their characteristic numbers. It was possible to detect periodic motion in the two-plate channel flow from the POD mode analysis. It was also found that when the energy is distributed among many POD modes, the fluid flow is disorganized and unsteady. (paper)

Status of thermal imaging technology as applied to conservation-update 1

Energy Technology Data Exchange (ETDEWEB)

Snow, F.J.; Wood, J.T.; Barthle, R.C.

1980-07-01

This document updates the 1978 report on the status of thermal imaging technology as applied to energy conservation in buildings. Thermal imaging technology is discussed in terms of airborne surveys, ground survey programs, and application needs such as standards development and lower cost equipment. Information on the various thermal imaging devices was obtained from manufacturer's standard product literature. Listings are provided of infrared projects of the DOE building diagnostics program, of aerial thermographic firms, and of aerial survey programs. (LCL)

Proper Acknowledgment?

Science.gov (United States)

East, Julianne

2005-01-01

The concern in Australian universities about the prevalence of plagiarism has led to the development of policies about academic integrity and in turn focused attention on the need to inform students about how to avoid plagiarism and how to properly acknowledge. Teaching students how to avoid plagiarism can appear to be straightforward if based on…

Analysis of Petroleum Technology Advances Through Applied Research by Independent Oil Producers

Energy Technology Data Exchange (ETDEWEB)

Brashear, Jerry P.; North, Walter B.; Thomas Charles P.; Becker, Alan B.; Faulder, David D.

2000-01-12

Petroleum Technology Advances Through Applied Research by Independent Oil Producers is a program of the National Oil Research Program, U.S. Department of Energy. Between 1995 and 1998, the program competitively selected and cost-shared twenty-two projects with small producers. The purpose was to involve small independent producers in testing technologies of interest to them that would advance (directly or indirectly) one or more of four national program objectives: (1) Extend the productive life of reservoirs; (2) Increase production and/or reserves; (3) Improve environmental performance; and (4) Broaden the exchange of technology information.

Technology Applied to ELT: Reviewing Practical Uses to Enhance English Teaching Programs

Directory of Open Access Journals (Sweden)

Javier Rojas Serrano

2007-12-01

Full Text Available In this paper, the author reports on some of the areas of technology currently used in the teaching and learning of languages, and reviews some of the uses of technological tools that are present in the English Adult Program and activities carried out at The Centro Colombo Americano (CCA in Bogota, Colombia. After briefly describing what is being applied worldwide in terms of what is being done at the CCA, some suggestions are offered in order to enhance the English teaching and learning processes through the use of new technologies.

The RAGE Advanced Game Technologies Repository for Supporting Applied Game Development

NARCIS (Netherlands)

Georgiev, Atanas; Grigorov, Alexander; Bontchev, Boyan; Boytchev, Pavel; Stefanov, Krassen; Westera, Wim; Prada, Rui; Hollins, Paul; Moreno Ger, Pablo

2016-01-01

This paper describes the structural architecture of the RAGE repository, which is a unique and dedicated infrastructure that provides access to a wide variety of advanced technologies (RAGE software assets) for applied game development. These software assets are reusable across a wide diversity of

34 CFR 403.63 - How does a State carry out the State Vocational and Applied Technology Education Program?

Science.gov (United States)

2010-07-01

... Applied Technology Education Program? 403.63 Section 403.63 Education Regulations of the Offices of the... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Kinds of Activities Does the Secretary Assist Under... Technology Education Program? (a) Unless otherwise indicated in the regulations in this part, a State board...

Applied machining technology

CERN Document Server

Tschätsch, Heinz

2010-01-01

Machining and cutting technologies are still crucial for many manufacturing processes. This reference presents all important machining processes in a comprehensive and coherent way. It includes many examples of concrete calculations, problems and solutions.

Proper motions and distances of quasars

International Nuclear Information System (INIS)

Varshni, Y.P.

1982-01-01

The author's theory that quasars are stars raises the question of their proper motions. From the evidence presented in a previous paper, it is hypothesised that planetary nuclei and quasars are related objects and that their distributions in the galaxy are not very different. Proper motions of 30 quasars, calculated from existing measurements, are discussed. It is shown that three of these, namely PHL 1033, LB 8956 and LB 8991, have proper motions comparable to the largest proper motion known amongst the planetary nuclei. From this it is estimated that these three quasars lie within a few hundred parsecs from the sun. The evidence presented in a previous paper and the present one clearly supports the theory that quasars are stars. The possibility of using the interstellar K and H lines as distance indicators of quasars is discussed and the available evidence summarised. The desirability of determining more accurate values of the proper motions of quasars is emphasised. (Auth.)

Proper body mechanics from an engineering perspective.

Science.gov (United States)

Mohr, Edward G

2010-04-01

The economic viability of the manual therapy practitioner depends on the number of massages/treatments that can be given in a day or week. Fatigue or injuries can have a major impact on the income potential and could ultimately reach the point which causes the practitioner to quit the profession, and seek other, less physically demanding, employment. Manual therapy practitioners in general, and massage therapists in particular, can utilize a large variety of body postures while giving treatment to a client. The hypothesis of this paper is that there is an optimal method for applying force to the client, which maximizes the benefit to the client, and at the same time minimizes the strain and effort required by the practitioner. Two methods were used to quantifiably determine the effect of using "poor" body mechanics (Improper method) and "best" body mechanics (Proper/correct method). The first approach uses computer modeling to compare the two methods. Both postures were modeled, such that the biomechanical effects on the practitioner's elbow, shoulder, hip, knee and ankle joints could be calculated. The force applied to the client, along with the height and angle of application of the force, was held constant for the comparison. The second approach was a field study of massage practitioners (n=18) to determine their maximal force capability, again comparing methods using "Improper and Proper body mechanics". Five application methods were tested at three different application heights, using a digital palm force gauge. Results showed that there was a definite difference between the two methods, and that the use of correct body mechanics can have a large impact on the health and well being of the massage practitioner over both the short and long term. Copyright 2009 Elsevier Ltd. All rights reserved.

The Gtz system management applied to photovoltaic rural electrification projects

Energy Technology Data Exchange (ETDEWEB)

Rosenthal, Pablo [Brendel Proper, (Bolivia)]|[GTZ-Cooperacion Tecnica de la Republica de Alemania, (Germany)

1995-12-31

The GTZ (Federal Republic of Germany Technical Cooperation Society) has developed a general project design system, particularly for Renewable Energy, that systematically covers all aspects necessary in their planning and implementation, so that their effects are sustainable in the long run, and cover as well all the requirements of a determined diffusion. This is what they have called System Management. This methodology of project implementation can be described as capable of being applied to any action area, and has already proved and validated its efficiency in projects where it has been applied. The main reason for its use is based on the correction of previous experiences with projects that had a tendency towards one area of action alone, in a much too exclusive way -mainly the technological- neglecting important aspects in the sustainability of technologies being introduced. The experience of PROPER - Bolivia (Programa para la difusion de energias renovables), who has been applying this system to its projects, is being used as a methodological basis. PROPER started in 1991, and is programed to last until September or 1996. Among the main components being described in the system`s methodology, in the particular case of PHOTOVOLTAIC RURAL ELECTRIFICATION PROJECTS, stand out the areas of Technological Transference; Training; Diffusion; Financing; Energy Policy; Planning, Monitoring, and Evaluation; and Support and Follow-up to the supply and demand. [Espanol] La GTZ (Sociedad de Cooperacion Tecnica de la Republica Federal de Alemania) ha desarrollado un proyecto de sistema de diseno general, particularmente para Energia Renovable, que cubre sistematicamente todos los aspectos necesarios en su planeacion y puesta en practica , de tal manera que sus efectos son a la larga sustentables y cubren, asimismo todos los requerimientos de una difusion determinada. Esto es lo que han llamado {sup A}dministracion del Sistema{sup .} Esta metodologia de puesta en practica

The Gtz system management applied to photovoltaic rural electrification projects

Energy Technology Data Exchange (ETDEWEB)

Rosenthal, Pablo [Brendel Proper, (Bolivia); [GTZ-Cooperacion Tecnica de la Republica de Alemania, (Germany)

1996-12-31

The GTZ (Federal Republic of Germany Technical Cooperation Society) has developed a general project design system, particularly for Renewable Energy, that systematically covers all aspects necessary in their planning and implementation, so that their effects are sustainable in the long run, and cover as well all the requirements of a determined diffusion. This is what they have called System Management. This methodology of project implementation can be described as capable of being applied to any action area, and has already proved and validated its efficiency in projects where it has been applied. The main reason for its use is based on the correction of previous experiences with projects that had a tendency towards one area of action alone, in a much too exclusive way -mainly the technological- neglecting important aspects in the sustainability of technologies being introduced. The experience of PROPER - Bolivia (Programa para la difusion de energias renovables), who has been applying this system to its projects, is being used as a methodological basis. PROPER started in 1991, and is programed to last until September or 1996. Among the main components being described in the system`s methodology, in the particular case of PHOTOVOLTAIC RURAL ELECTRIFICATION PROJECTS, stand out the areas of Technological Transference; Training; Diffusion; Financing; Energy Policy; Planning, Monitoring, and Evaluation; and Support and Follow-up to the supply and demand. [Espanol] La GTZ (Sociedad de Cooperacion Tecnica de la Republica Federal de Alemania) ha desarrollado un proyecto de sistema de diseno general, particularmente para Energia Renovable, que cubre sistematicamente todos los aspectos necesarios en su planeacion y puesta en practica , de tal manera que sus efectos son a la larga sustentables y cubren, asimismo todos los requerimientos de una difusion determinada. Esto es lo que han llamado {sup A}dministracion del Sistema{sup .} Esta metodologia de puesta en practica

Improved Switching Characteristics of Fast Power MOSFETs Applying Solder Bump Technology

Directory of Open Access Journals (Sweden)

Sibylle Dieckerhoff

2008-01-01

Full Text Available The impact of a reduced package stray inductance on the switching performance of fast power MOSFETs is discussed applying advanced 3D packaging technologies. Starting from an overview over new packaging approaches, a solder bump technology using a flexible PI substrate is exemplarily chosen for the evaluation. Measurement techniques to determine the stray inductance are discussed and compared with a numerical solution based on the PEEC method. Experimental results show the improvement of the voltage utilization while there is only a slight impact on total switching losses.

Study of fieldbus technology applied in a sterilization plant control and safety systems

International Nuclear Information System (INIS)

Karam Junior, Dib

2000-01-01

Several sterilization processes have been used in these years for treatment of countless products. Some processes use high temperatures, thermal shocks and chemical agents. With the discovery of the ionizing radiation and its posterior technological developments turned possible application of that process, in 1960, also in the the sterilization, denominated radiation sterilization. This process became also applied in another areas of health and industrial as food conservation, gemstones enhancement and others. The radiation sterilization requests an effective control and it needs a high level of safety. The commercial use of the computers applied in industrial automation provides and the domain of new technologies in this field provides new applications then new designs now is possible. The Fieldbus technology, a new digital communication protocol, like a Local Area Network, can be an alternative in the cobalt-60 irradiation plant. The present work suggests, evaluates, qualifies and quantifies this possibility. (author)

Managing the employee's soul: Foucault applied to modern management technologies

Directory of Open Access Journals (Sweden)

Kaspar Villadsen

Full Text Available This paper presents an alternative approach to analyse power in modern organisations. It does so by applyingFoucauldian concepts to new types of management technologies, which are directed at the employee's personality. Most often, studies of power and management focus on organisational structures, power games between groups and issues of how to manage processes within and between organisations. We rarely talk about whatcould be termed 'the management of personality'. This paper argues, however, that this kind of Human Resource Management is becoming increasingly important and should be a key focus in critical organisational analysis. It also discusses the consequences and possibilities for employees facing a proliferation of management-ofpersonality technologies.

Mass estimates from stellar proper motions: the mass of ω Centauri

Science.gov (United States)

D'Souza, Richard; Rix, Hans-Walter

2013-03-01

We lay out and apply methods to use proper motions of individual kinematic tracers for estimating the dynamical mass of star clusters. We first describe a simple projected mass estimator and then develop an approach that evaluates directly the likelihood of the discrete kinematic data given the model predictions. Those predictions may come from any dynamical modelling approach, and we implement an analytic King model, a spherical isotropic Jeans equation model and an axisymmetric, anisotropic Jeans equation model. This maximum likelihood modelling (MLM) provides a framework for a model-data comparison, and a resulting mass estimate, which accounts explicitly for the discrete nature of the data for individual stars, the varying error bars for proper motions of differing signal-to-noise ratio, and for data incompleteness. Both of these two methods are evaluated for their practicality and are shown to provide an unbiased and robust estimate of the cluster mass. We apply these approaches to the enigmatic globular cluster ω Centauri, combining the proper motion from van Leeuwen et al. with improved photometric cluster membership probabilities. We show that all mass estimates based on spherical isotropic models yield (4.55 ± 0.1) × 106 M⊙[D/5.5 ± 0.2 kpc]3, where our modelling allows us to show how the statistical precision of this estimate improves as more proper motion data of lower signal-to-noise ratio are included. MLM predictions, based on an anisotropic axisymmetric Jeans model, indicate for ω Cen that the inclusion of anisotropies is not important for the mass estimates, but that accounting for the flattening is: flattened models imply (4.05 ± 0.1) × 106 M⊙[D/5.5 ± 0.2 kpc]3, 10 per cent lower than when restricting the analysis to a spherical model. The best current distance estimates imply an additional uncertainty in the mass estimate of 12 per cent.

Journal of Applied Science and Technology - Vol 15, No 1-2 (2010)

African Journals Online (AJOL)

Journal of Applied Science and Technology. ... to maximize the weighted number of just-in-time jobs · EMAIL FULL TEXT EMAIL FULL TEXT ... Controlling electrical power losses in transmission and distribution networks in Nigeria · EMAIL ...

The role of applied physics in American introductory physics courses

Science.gov (United States)

Poduska, Ervin L.; Lunetta, Vincent N.

1984-09-01

To what extent should technology and applied physics be included in introductory physics courses? What is the proper balance between pure and applied physics? Should physics teachers devote precious time to socially relevant issues like nuclear power and alternative sources of energy? How much time should be spent, if any, on applications that are more relevant to the student's world like cars, music, television and refrigeration? Does including applications reduce or enhance student understanding of important classical topics? A response to these questions must be based on goals for physics teaching, on knowledge of how students learn and on the nature of the physics discipline. Since there is not enough time to teach everything in an introductory course, priorities must be determined.

Investigating the effectiveness of technologies applied to assist seniors: A systematic literature review.

Science.gov (United States)

Khosravi, Pouria; Ghapanchi, Amir Hossein

2016-01-01

Recently, a number of Information and Communication Technologies have emerged with the aim to provide innovative and efficient ways to help seniors in their daily life and to reduce the cost of healthcare. Studies have been conducted to introduce an assistive technology to support seniors and to investigate the acceptance of these assistive technologies; however, research illustrating the effectiveness of assistive technologies is scant. This study undertakes a systematic literature review of ScienceDirect, PubMed, ProQuest and IEEE Explore databases to investigate current empirical studies on the assistive technologies applied in aged care. Our systematic review of an initial set of 2035 studies published from 2000 to 2014 examines the role of assistive technologies in seniors' daily lives, from enhancements in their mobility to improvements in the social connectedness and decreases in readmission to hospitals. This study found eight key issues in aged care that have been targeted by researchers from different disciplines (e.g., ICT, health and social science), namely, dependent living, fall risk, chronic disease, dementia, social isolation, depression, poor well-being, and poor medication management. This paper also identified the assistive technologies that have been proposed to overcome those problems, and we categorised these assistive technologies into six clusters, namely, general ICT, robotics, telemedicine, sensor technology, medication management applications, and video games. In addition, we analyzed the effectiveness of the identified technologies and noted that some technologies can change and enhance seniors' daily lives and relieve their problems. Our analysis showed a significant growth in the number of publications in this area in the past few years. It also showed that most of the studies in this area have been conducted in North America. Assistive technologies are a reality and can be applied to improve quality of life, especially among older age

Translating Proper Nouns: A Case Study on English Translation of Hafez's Lyrics

Science.gov (United States)

Shirinzadeh, Seyed Alireza; Mahadi, Tengku Sepora Tengku

2014-01-01

Proper nouns are regarded so simple that they might be taken for granted in translation explorations. Some may believe that they should not be translated in transmitting source texts to target texts. But, it is not the case; if one looks at present translations, he will notice that different strategies might be applied for translating proper…

Towards proper name generation : A corpus analysis

NARCIS (Netherlands)

Castro Ferreira, Thiago; Wubben, Sander; Krahmer, Emiel

We introduce a corpus for the study of proper name generation. The corpus consists of proper name references to people in webpages, extracted from the Wikilinks corpus. In our analyses, we aim to identify the different ways, in terms of length and form, in which a proper names are produced

Applying Freeze Technology for Characterisation of Liquids, Sludge and Sediment

International Nuclear Information System (INIS)

Eriksson, Jens; Foster, Adam; Lindberg, Maria

2016-01-01

Full text of publication follows: Contaminated solids below a water table or solids in a water saturated environment can be major cost drivers and have a massive impact on the overall schedule and scope for a decommissioning project if not managed properly. One well recognized key activity in the preparation for decommissioning is to perform a proper characterisation covering all objects and areas which have been affected or potentially affected by contamination. Characterization of potentially contaminated material located below water or in water saturated environments can be difficult to perform accurately. Furthermore, traditional sampling techniques typically result in the disturbance or spreading of the contamination during sample collection. Sampling programs should be done in such a way that the radioactivity is contained (to avoid further spread of contamination), and in a way that the risk for cross contamination is minimised. Studsvik's Freeze Technology has been used to develop the necessary sampling techniques to meet these objectives. This technology is proven and frequently used for environmental characterization and remediation applications. The design of the sampling tools for radiological characterisation allows for samples to be taken at specific depths and at specific locations within the contaminated area without disturbing the contaminated material around the sample location. In addition to the sampling technique described above, a modified freeze sampling design has proven to be very useful in collecting frozen core samples that provide an accurate profile of the contamination and chemical and physical characteristics of the sediment or sludge as a function of depth into the sludge or sediment. Ultimately, this technique is used to develop a 3-D map of the physical characteristics and the chemical and radiological composition of the contaminated area. For many projects, this type of information will allow for a large reduction in the

PROPER MOTIONS OF THE HH 110/270 SYSTEM

International Nuclear Information System (INIS)

Kajdič, P.; Reipurth, B.; Walawender, J.; Raga, A. C.; Bally, J.

2012-01-01

We present a study of the HH 110/270 system based on three sets of optical images obtained with the ESO New Technology Telescope, the Subaru Telescope, and the Hubble Space Telescope (HST). The ground-based observations are made in the Hα and [S II] emission lines and the HST observations are made in the Hα line only. Ground-based observations reveal the existence of nine knots, which have not been previously discussed and offer some important insight into the HH 110/270 history. We perform a kinematic study of the HH 110/270 system and an analysis of its emission properties. We measure proper motions of all the knots in the system. Four of the newly identified knots belong to the HH 270 jet. Their positions indicate that the jet's axis changed its direction in the past. We speculate that similar changes may have occurred many times in the past and this could be part of the reason for the unusual structure of the HH 110 jet. The HST observations allow us to resolve individual knots into their substructures and to measure their proper motions. These measurements show that the knots are highly turbulent structures. Finally, we report the discovery of four new Herbig-Haro (HH) objects located near the HH 110/270 system.

Applying Blockchain Technology: Evidence from Norwegian Companies

Directory of Open Access Journals (Sweden)

Anne H. Gausdal

2018-06-01

Full Text Available The aim of this study is to develop a theoretical framework for blockchain, operations in particular. Furthermore, we aim to identify the main drivers and barriers of digital innovation and explore the general possibilities of blockchain applications within the maritime industry. A case study approach is applied: the Norwegian offshore industry. Primary data is collected through interviews, while secondary data is collected from industrial and company reports, the Internet, and national and international media reports. We have discovered that cost reduction intentions, the high level of regulation in the maritime industry, and the large amount of data that maritime companies should process, along with the intention to work more effectively, are the main drivers of digital innovation. On the other hand, the high cost of implementation, the bad quality of Internet connections offshore, the old age of decision-makers, the technology-oriented culture, the lack of investment initiatives, the low level of blockchain diffusion through the supply chain, and risk aversion are the main barriers. The results of the qualitative study show that some of the barriers and motives of digital innovation and the introduction to blockchain technology were pointed out by earlier studies. However, we have identified several unique drivers and barriers specific to the industry. Finally, the blockchain process framework is developed.

PropeR revisited

NARCIS (Netherlands)

van der Linden, Helma; Talmon, Jan; Tange, Huibert; Grimson, Jane; Hasman, Arie

2005-01-01

INTRODUCTION: The PropeR EHR system (PropeRWeb) is a multidisciplinary electronic health record (EHR) system for multidisciplinary use in extramural patient care for stroke patients. DESIGN: The system is built using existing open source components and is based on open standards. It is implemented

A Delphi Study on Technology Enhanced Learning (TEL) Applied on Computer Science (CS) Skills

Science.gov (United States)

Porta, Marcela; Mas-Machuca, Marta; Martinez-Costa, Carme; Maillet, Katherine

2012-01-01

Technology Enhanced Learning (TEL) is a new pedagogical domain aiming to study the usage of information and communication technologies to support teaching and learning. The following study investigated how this domain is used to increase technical skills in Computer Science (CS). A Delphi method was applied, using three-rounds of online survey…

High-energy power capacitors, their applied technology and the trends

International Nuclear Information System (INIS)

2012-01-01

High-voltage and high-energy-density power capacitors called high-power ones such as film or electrolytic capacitors, have been used in large quantities for the pulse power technology such as an impulse current or voltage generator and a laser power supply, and for the power electronics one with progress of the power semiconductor device and the inverter technology. Recently, electric double layer capacitors (EDLC) with remarkable technical progress have been applied for the equipments of electric power and industrial field for the purpose of energy saving or electric power quality improvement, which have come to link to the electric power system. Thus, using a lot of high-power capacitors near our life would require to know the structure, the principle and the characteristic of capacitors, and also to consider suitable directions for use, maintenance and safety and so on, when carrying out a system and a facility design. In the technical report, while describing the dielectric and the feature of some high-power capacitors, and introducing the application examples to the laser-fusion power supply and some systems with EDLC, the trend of standardization of EDLC and the directivity of the examination about installation and maintenance of the applied equipments are described. (author)

Properly colored connectivity of graphs

CERN Document Server

Li, Xueliang; Qin, Zhongmei

2018-01-01

A comprehensive survey of proper connection of graphs is discussed in this book with real world applications in computer science and network security. Beginning with a brief introduction, comprising relevant definitions and preliminary results, this book moves on to consider a variety of properties of graphs that imply bounds on the proper connection number. Detailed proofs of significant advancements toward open problems and conjectures are presented with complete references. Researchers and graduate students with an interest in graph connectivity and colorings will find this book useful as it builds upon fundamental definitions towards modern innovations, strategies, and techniques. The detailed presentation lends to use as an introduction to proper connection of graphs for new and advanced researchers, a solid book for a graduate level topics course, or as a reference for those interested in expanding and further developing research in the area.

The relation between maturity and sophistication shall be properly dealt with in nuclear power development

International Nuclear Information System (INIS)

Li Yongjiang

2009-01-01

The paper analyses the advantages and disadvantages of the second generation improved technologies and third generation technologies mainly developed in China in terms of safety and economy. The paper also discusses the maturity of the second generation improved technologies and the sophistication of the third generation technologies respectively. Meanwhile, the paper proposes that the advantage and disadvantage of second generation improved technologies and third generation technologies should be carefully taken into consideration and the relationship between the maturity and sophistication should be properly dealt with in the current stage. A two-step strategy shall be taken as a solution to solve the problem of insufficient capacity of nuclear power, trace and develop the third generation technologies, so as to ensure the sound and fast development of nuclear power. (authors)

Technological Criteria Technology-Environmental under a Systemic Approach: Chemistry Technology Transfer

OpenAIRE

Durán-García Martín Enrique

2014-01-01

Currently the transfer of chemical technology is a process that contributes to the technology policy of a country, an industry or an organization in general chemistry. This process requires the application of clear criteria for the proper development of the complex interrelations in the transfer of chemical technology. A group of criteria that are present, are those related to environmental technology which intrinsically define the technology and its impact to the environment. Therefore, the ...

Study of fieldbus technology confiability when applied in a Sterilization plant control and safety systems

International Nuclear Information System (INIS)

Karma, D.; Sampa, M.H.O.; Rela, P.R.

2001-01-01

Several sterilization processes have been used in these years for treatment of countless products. Some processes use high temperatures, thermal shocks and chemical agents. With the discovery of the ionizing radiation and its posterior technological developments turned possible the application of that process, in 1960, also in the sterilization, denominated radiation sterilization. This process became also applied in another areas of health and industrial as food conservation, gemstones enhancement and others. The radiation sterilization requests an effective control and it needs a high level of safety. The commercial use of the computers applied in industrial automation provides and the domain of new technologies in this field provides news applications then new designs now is possible. The Fieldbus technology, a new digital communication protocol, like a Local Area Network, can be an alternative in the cobalt-60 irradiation plant. This paper show preliminary study about confiability in systems using Fieldbus technology. This technology was simulated in sterilization plant control and safety systems and the fail probability was quantified using Fail Tree Analysis Method. Fieldbus technology can be used in sterilization plants because the confiability in this systems is like PLCs and relays systems, was the conclusion

Applying Distributed Object Technology to Distributed Embedded Control Systems

DEFF Research Database (Denmark)

Jørgensen, Bo Nørregaard; Dalgaard, Lars

2012-01-01

In this paper, we describe our Java RMI inspired Object Request Broker architecture MicroRMI for use with networked embedded devices. MicroRMI relieves the software developer from the tedious and error-prone job of writing communication protocols for interacting with such embedded devices. MicroR...... in developing control systems for distributed embedded platforms possessing severe resource restrictions.......RMI supports easy integration of high-level application specific control logic with low-level device specific control logic. Our experience from applying MicroRMI in the context of a distributed robotics control application, clearly demonstrates that it is feasible to use distributed object technology...

Underwater welding and repair technologies applied in PWR environment

International Nuclear Information System (INIS)

Scandella, Fabrice; Carpreau, Jean-Michel

2012-01-01

The authors describe several welding processes and technologies which have been used for underwater applications and which can be applied when repairing components of a PWR type reactor. They address, describe and discuss wet arc welding processes, the peculiarities of underwater welding, and the use of various processes such as 111, 114 and 135 processes, underwater welding with the hybrid plasma MIG-MAG process, underwater welding with the laser wire process, underwater welding with the FSW, FSP or UWFSW processes, underwater welding with variants of the friction welding process (friction surfacing, taper stitch welding, hydro-pillar processing

PROPER MOTIONS OF THE HH 110/270 SYSTEM

Energy Technology Data Exchange (ETDEWEB)

Kajdic, P. [Instituto de Astronomia, UNAM, Mexico D.F. (Mexico); Reipurth, B.; Walawender, J. [Institute for Astronomy, University of Hawaii at Manoa, 640 N. A' ohoku Place, Hilo, HI 96720 (United States); Raga, A. C. [Instituto de Ciencias Nucleares, UNAM, Mexico D.F. (Mexico); Bally, J., E-mail: primoz@geofisica.unam.mx, E-mail: reipurth@IfA.Hawaii.Edu, E-mail: raga@nucleares.unam.mx, E-mail: John.Bally@casa.colorado.edu, E-mail: joshw@ifa.hawaii.edu [CASA, University of Colorado, 389 UCB, Boulder, CO 80309-0389 (United States)

2012-05-15

We present a study of the HH 110/270 system based on three sets of optical images obtained with the ESO New Technology Telescope, the Subaru Telescope, and the Hubble Space Telescope (HST). The ground-based observations are made in the H{alpha} and [S II] emission lines and the HST observations are made in the H{alpha} line only. Ground-based observations reveal the existence of nine knots, which have not been previously discussed and offer some important insight into the HH 110/270 history. We perform a kinematic study of the HH 110/270 system and an analysis of its emission properties. We measure proper motions of all the knots in the system. Four of the newly identified knots belong to the HH 270 jet. Their positions indicate that the jet's axis changed its direction in the past. We speculate that similar changes may have occurred many times in the past and this could be part of the reason for the unusual structure of the HH 110 jet. The HST observations allow us to resolve individual knots into their substructures and to measure their proper motions. These measurements show that the knots are highly turbulent structures. Finally, we report the discovery of four new Herbig-Haro (HH) objects located near the HH 110/270 system.

The importance of tracer technology in combined borehole investigations

International Nuclear Information System (INIS)

Zojer, H.

1998-01-01

In an experimental field for a waste disposal site, investigations have been carried out applying methods from geology, hydrology hydrogeology, hydrochemistry, environmental isotope hydrology and tracer technology. All data obtained result to a dynamic drainage model of groundwater. The combined interpretation of borehole data guarantees a high-grade knowledge of groundwater exfiltrating to the surface drainage, which enables proper control measures of the disposal site and an effective groundwater protection. (author)

Editorial: Advances in Health Education Applying E-Learning, Simulations and Distance Technologies

Directory of Open Access Journals (Sweden)

Andre W. Kushniruk

2011-03-01

Full Text Available This special issue of the KM&EL international journal is dedicated to coverage of novel advances in health professional education applying e-Learning, simulations and distance education technologies. Modern healthcare is beginning to be transformed through the emergence of new information technologies and rapid advances in health informatics. Advances such as electronic health record systems (EHRs, clinical decision support systems and other advanced information systems such as public health surveillance systems are rapidly being deployed worldwide. The education of health professionals such as medical, nursing and allied health professionals will require an improved understanding of these technologies and how they will transform their healthcare practice. However, currently there is a lack of integration of knowledge and skills related to such technology in health professional education. In this issue of the journal we present articles that describe a set of novel approaches to integrating essential health information technology into the education of health professionals, as well as the use of advanced information technologies and e-Learning approaches for improving health professional education. The approaches range from use of simulations to development of novel Web-based platforms for allowing students to interact with the technologies and healthcare practices that are rapidly changing healthcare.

Selected case studies of technology transfer from mission-oriented applied research

Energy Technology Data Exchange (ETDEWEB)

Daellenbach, K.K.; Watts, R.L.; Young, J.K. [Pacific Northwest Lab., Richland, WA (United States); Abarcar, R.B. [Energetics, Inc., Columbia, MD (United States)

1992-07-01

The US Department of Energy (DOE) Advanced Industrial Concepts Division (AICD) under the Office of Industrial Technologies (OIT) supports interdisciplinary applied research and exploratory development that will expand the knowledge base to enable industry to improve its energy efficiency and its capability to use alternative energy resources. AICD capitalizes on scientific and technical advances from the United States and abroad, applying them to address critical technical needs of American industry. As a result, AICD research and development products are many and varied, and the effective transfer of these products to diverse targeted users requires different strategies as well. This paper describes the products of AICD research, how they are transferred to potential users, and how actual transfer is determined.

The Analysis of the Available Technology of Exploiting and Applying Biohydrocarbons for Fuel Production Part I

Directory of Open Access Journals (Sweden)

Gielo-Klepacz Halina

2017-08-01

Full Text Available The article shows the current state of knowledge in the area of applying biohydrocarbons for fuel production, especially in aeronautical applications and to power compression-ignition engines. The technologies based on biochemical and thermal/chemical conversion of biomass are described. Technological potential of these technologies is evaluated. The article is based on the literature review.

Instrumentation for Applied Physics and Industrial Applications: Applications of Detectors in Technology, Medicine and Other Fields

CERN Document Server

Hillemanns, H

2011-01-01

Instrumentation for Applied Physics and Industrial Applications in 'Applications of Detectors in Technology, Medicine and Other Fields', part of 'Landolt-Börnstein - Group I Elementary Particles, Nuclei and Atoms: Numerical Data and Functional Relationships in Science and Technology, Volume 21B2: Detectors for Particles and Radiation. Part 2: Systems and Applications'. This document is part of Part 2 'Principles and Methods' of Subvolume B 'Detectors for Particles and Radiation' of Volume 21 'Elementary Particles' of Landolt-Börnstein - Group I 'Elementary Particles, Nuclei and Atoms'. It contains the Section '7.3 Instrumentation for Applied Physics and Industrial Applications' of Chapter '7 Applications of Detectors in Technology; Medicine and Other Fields' with the content: 7.3 Instrumentation for Applied Physics and Industrial Applications 7.3.1 Applications of HEP Detectors 7.3.2 Fast Micro- and Nanoelectronics for Particle Detector Readout 7.3.2.1 Fast Counting Mode Front End Electronics 7.3.2.2 NINO,...

IMPROVED ROOF STABILIZATION TECHNOLOGIES

Energy Technology Data Exchange (ETDEWEB)

M.A. Ebadian, Ph.D.

1999-01-01

Many U.S. Department of Energy (DOE) remediation sites have performed roof repair and roof replacement to stabilize facilities prior to performing deactivation and decommissioning (D&D) activities. This project will review the decision criteria used by these DOE sites, along with the type of repair system used for each different roof type. Based on this information, along with that compiled from roofing experts, a decision-making tool will be generated to aid in selecting the proper roof repair systems. Where appropriate, innovative technologies will be reviewed and applied to the decision-making tool to determine their applicability. Based on the results, applied research and development will be conducted to develop a method to repair these existing roofing systems, while providing protection for the D and D worker in a cost-efficient manner.

IMPROVED ROOF STABILIZATION TECHNOLOGIES

International Nuclear Information System (INIS)

Ebadian, M.A.

1999-01-01

Many U.S. Department of Energy (DOE) remediation sites have performed roof repair and roof replacement to stabilize facilities prior to performing deactivation and decommissioning (D and D) activities. This project will review the decision criteria used by these DOE sites, along with the type of repair system used for each different roof type. Based on this information, along with that compiled from roofing experts, a decision-making tool will be generated to aid in selecting the proper roof repair systems. Where appropriate, innovative technologies will be reviewed and applied to the decision-making tool to determine their applicability. Based on the results, applied research and development will be conducted to develop a method to repair these existing roofing systems, while providing protection for the D and D worker in a cost-efficient manner

Ultrasonic horn design for ultrasonic machining technologies

Directory of Open Access Journals (Sweden)

Naď M.

2010-07-01

Full Text Available Many of industrial applications and production technologies are based on the application of ultrasound. In many cases, the phenomenon of ultrasound is also applied in technological processes of the machining of materials. The main element of equipments that use the effects of ultrasound for machining technology is the ultrasonic horn – so called sonotrode. The performance of ultrasonic equipment, respectively ultrasonic machining technologies depends on properly designed of sonotrode shape. The dynamical properties of different geometrical shapes of ultrasonic horns are presented in this paper. Dependence of fundamental modal properties (natural frequencies, mode shapes of various sonotrode shapes for various geometrical parameters is analyzed. Modal analyses of the models are determined by the numerical simulation using finite element method (FEM design procedures. The mutual comparisons of the comparable parameters of the various sonotrode shapes are presented.

Applying language technology to nursing documents: pros and cons with a focus on ethics.

Science.gov (United States)

Suominen, Hanna; Lehtikunnas, Tuija; Back, Barbro; Karsten, Helena; Salakoski, Tapio; Salanterä, Sanna

2007-10-01

The present study discusses ethics in building and using applications based on natural language processing in electronic nursing documentation. Specifically, we first focus on the question of how patient confidentiality can be ensured in developing language technology for the nursing documentation domain. Then, we identify and theoretically analyze the ethical outcomes which arise when using natural language processing to support clinical judgement and decision-making. In total, we put forward and justify 10 claims related to ethics in applying language technology to nursing documents. A review of recent scientific articles related to ethics in electronic patient records or in the utilization of large databases was conducted. Then, the results were compared with ethical guidelines for nurses and the Finnish legislation covering health care and processing of personal data. Finally, the practical experiences of the authors in applying the methods of natural language processing to nursing documents were appended. Patient records supplemented with natural language processing capabilities may help nurses give better, more efficient and more individualized care for their patients. In addition, language technology may facilitate patients' possibility to receive truthful information about their health and improve the nature of narratives. Because of these benefits, research about the use of language technology in narratives should be encouraged. In contrast, privacy-sensitive health care documentation brings specific ethical concerns and difficulties to the natural language processing of nursing documents. Therefore, when developing natural language processing tools, patient confidentiality must be ensured. While using the tools, health care personnel should always be responsible for the clinical judgement and decision-making. One should also consider that the use of language technology in nursing narratives may threaten patients' rights by using documentation collected

SUCCESS CONCEPT ANALYSIS APPLIED TO THE INFORMATION TECHNOLOGY PROJECT MANAGEMENT

Directory of Open Access Journals (Sweden)

Cassio C. Montenegro Duarte

2012-05-01

Full Text Available This study evaluates the concept of success in project management that is applicable to the IT universe, from the classical theory associated with the techniques of project management. Therefore, it applies the theoretical analysis associated to the context of information technology in enterprises as well as the classic literature of traditional project management, focusing on its application in business information technology. From the literature developed in the first part of the study, four propositions were prepared for study which formed the basis for the development of the field research with three large companies that develop projects of Information Technology. The methodology used in the study predicted the development of the multiple case study. Empirical evidence suggests that the concept of success found in the classical literature in project management adjusts to the environment management of IT projects. Showed that it is possible to create the model of standard IT projects in order to replicate it in future derivatives projects, which depends on the learning acquired at the end of a long and continuous process and sponsorship of senior management, which ultimately results in its merger into the company culture.

VizieR Online Data Catalog: Proper motions in M 11 (Su+ 1998)

Science.gov (United States)

Su, C.-G.; Zhao, J.-L.; Tian, K.-P.

1997-07-01

Relative proper motions of 872 stars in the open cluster M 11 region are reduced using 10 plate pairs taken over time baselines of 16~70 years with the double astrograph telescope of Shanghai Observatory. The scale is 30"/mm. The plates were measured with the PDS machines in the Purple Mountain Observatory in Nanjing and the Institute of Technology and Communication in Luoyang, China. The average proper motion accuracy is about 1.1mas/yr with 85% of the data better than 1mas/yr. Membership probabilities of 785 stars within 25' centred on M 11 are determined based on their proper motions. The method used is suggested by Su et al. (1995AcApS..15..217S) with some improvements of Zhao & He (1990A&A...237...54Z), in which the space distribution and magnitude dependencies for cluster stars are taken into account. The results are significantly good. The total integrated membership probabilities for all these stars is 547 and the number of stars with probabilities higher than 0.7 is 541. It can be found after the membership determination that there exists mass segregation in M 11. Some comparisons and discussion are also given. (1 data file).

Determination of proper motions in the Pleiades cluster

Science.gov (United States)

Schilbach, E.

1991-04-01

For 458 stars in the Pleiades field from the catalog of Eichhorn et al. (1970) proper motions were derived on Tautenburg and CERGA Schmidt telescope plates measured with the automated measuring machine MAMA in Paris. The catalog positions were considered as first epoch coordinates with an epoch difference of ca. 33 years to the observations. The results show good coincidence of proper motions derived with both Schmidt telescopes within the error bars. Comparison with proper motions determined by Vasilevskis et al. (1979) displays some significant differences but no systematic effects depending on plate coordinates or magnitudes could be found. An accuracy of 0.3 arcsec/100a for one proper motion component was estimated. According to the criterion of common proper motion 34 new cluster members were identified.

On the Determination of Proper Time

OpenAIRE

Hurl, Bing; Zhang, Zhi-Yong Wang Hai-Dong

1998-01-01

Through the analysis of the definition of the duration of proper time of a particle given by the length of its world line, we show that there is no transitivity of the coordinate time function derived from the definition, so there exists an ambiguity in the determination of the duration of the proper time for the particle. Its physical consequence is illustrated with quantum measurement effect.

Array-on-a-disk? How Blu-ray technology can be applied to molecular diagnostics.

Science.gov (United States)

Morais, Sergi; Tortajada-Genaro, Luis; Maquieira, Angel

2014-09-01

This editorial comments on the balance and perspectives of compact disk technology applied to molecular diagnostics. The development of sensitive, rapid and multiplex assays using Blu-ray technology for the determination of biomarkers, drug allergens, pathogens and detection of infections would have a direct impact on diagnostics. Effective tests for use in clinical, environmental and food applications require versatile and low-cost platforms as well as cost-effective detectors. Blu-ray technology accomplishes those requirements and advances on the concept of high density arrays for massive screening to achieve the demands of point of care or in situ analysis.

Large proper motions in the Orion nebula

International Nuclear Information System (INIS)

Cudworth, K.M.; Stone, R.C.

1977-01-01

Several nebular features, as well as one faint star, with large proper motions were identified within the Orion nebula. The measured proper motions correspond to tangential velocities of up to approximately 70 km sec -1 . One new probable variable star was also found

Computation of Asteroid Proper Elements: Recent Advances

Science.gov (United States)

Knežević, Z.

2017-12-01

The recent advances in computation of asteroid proper elements are briefly reviewed. Although not representing real breakthroughs in computation and stability assessment of proper elements, these advances can still be considered as important improvements offering solutions to some practical problems encountered in the past. The problem of getting unrealistic values of perihelion frequency for very low eccentricity orbits is solved by computing frequencies using the frequency-modified Fourier transform. The synthetic resonant proper elements adjusted to a given secular resonance helped to prove the existence of Astraea asteroid family. The preliminary assessment of stability with time of proper elements computed by means of the analytical theory provides a good indication of their poorer performance with respect to their synthetic counterparts, and advocates in favor of ceasing their regular maintenance; the final decision should, however, be taken on the basis of more comprehensive and reliable direct estimate of their individual and sample average deviations from constancy.

Should We Limit "Screen Time" In School?: Debating the Wisest Use of Technology in the Classroom

Science.gov (United States)

Scoggin, Daniel; Vander Ark, Tom

2018-01-01

A truism of school reform has long been the promise that technology, properly applied, will fuel dramatic improvement in teaching and learning. When tech-enabled schools or online learning programs haven't delivered the hoped-for results, some have dismissed these shortcomings as implementation problems--or evidence that we haven't yet deployed…

High-quality poly-dispersed mixtures applied in additive 3D technologies.

Science.gov (United States)

Gerasimov, M. D.; Brazhnik, Yu V.; Gorshkov, P. S.; Latyshev, S. S.

2018-03-01

The paper describes the new mixer design to obtain high-quality poly-dispersed powders applied in additive 3D technologies. It also considers a new mixing principle of dry powder particles ensuring the distribution of such particles in the total volume, which is close to ideal. The paper presents the mathematical model of mixer operation providing for the quality assessment of the ready mixtures. Besides, it demonstrates experimental results and obtained rational values of mixer process parameters.

Analysis of the concept of nursing educational technology applied to the patient

Directory of Open Access Journals (Sweden)

Aline Cruz Esmeraldo Áfio

2014-04-01

Full Text Available It is aimed at analyzing the concept of educational technology, produced by nursing, applied to the patient. Rodgers´ Evolutionary Method of Concept Analysis was used, identifying background, attributes and consequential damages. 13 articles were selected for analysis in which the background was identified: knowledge deficiency, shortage of nursing professionals' time, to optimize nursing work, the need to achieve the goals of the patients. Attributes: tool, strategy, innovative approach, pedagogical approach, mediator of knowledge, creative way to encourage the acquisition of skills, health production instrument. Consequences: to improve the quality of life, encouraging healthy behavior, empowerment, reflection and link. It emphasizes the importance of educational technologies for the care in nursing, to boost health education activities.

Advanced technologies applied to work management

International Nuclear Information System (INIS)

Aldrich, L.R.

1993-01-01

Commonwealth Edison Company subscribes to the dose optimization principle and has implemented reasonable efforts to maintain exposures to radiation as far below dose limits as practical consistent with the state of technology, the economics of improvements in relation to the state of technology and the economics of improvements in relation to the benefits to the public health and safety. In an effort to lower collective exposures, Commonwealth Edison Company has focused on improving performance in four key areas which have proven to contribute to lower personnel exposures - Management Controls, Work practices, Source Term Reduction and Technological Advancements. This paper focuses on the advanced technologies that the Commonwealth Edison Company has employed in the areas of work planning, work performance and work monitoring to manage our occupational dose control

Can eye-tracking technology improve situational awareness in paramedic clinical education?

Science.gov (United States)

Williams, Brett; Quested, Andrew; Cooper, Simon

2013-01-01

Human factors play a significant part in clinical error. Situational awareness (SA) means being aware of one's surroundings, comprehending the present situation, and being able to predict outcomes. It is a key human skill that, when properly applied, is associated with reducing medical error: eye-tracking technology can be used to provide an objective and qualitative measure of the initial perception component of SA. Feedback from eye-tracking technology can be used to improve the understanding and teaching of SA in clinical contexts, and consequently, has potential for reducing clinician error and the concomitant adverse events.

Cataclysmic variables in the SUPERBLINK proper motion survey

Energy Technology Data Exchange (ETDEWEB)

Skinner, Julie N.; Thorstensen, John R. [Department of Physics and Astronomy, 6127 Wilder Laboratory, Dartmouth College, Hanover, NH 03755-3528 (United States); Lépine, Sébastien, E-mail: jns@dartmouth.edu [Department of Physics and Astronomy, Georgia State University, 25 Park Place NE, Atlanta, GA 30303 (United States)

2014-12-01

We have discovered a new high proper motion cataclysmic variable (CV) in the SUPERBLINK proper motion survey, which is sensitive to stars with proper motions greater than 40 mas yr{sup −1}. This CV was selected for follow-up observations as part of a larger search for CVs selected based on proper motions and their near-UV−V and V−K{sub s} colors. We present spectroscopic observations from the 2.4 m Hiltner Telescope at MDM Observatory. The new CV's orbital period is near 96 minutes, its spectrum shows the double-peaked Balmer emission lines characteristic of quiescent dwarf novae, and its V magnitude is near 18.2. Additionally, we present a full list of known CVs in the SUPERBLINK catalog.

Diagnostic technology and an expert system for photovoltaic systems using the learning method

Energy Technology Data Exchange (ETDEWEB)

Yagi, Yasuhiro; Kishi, Hitoshi; Hagihara, Ryuzou; Tanaka, Toshiya; Kozuma, Shinichi; Ishida, Takeo; Waki, Masahiro; Tanaka, Makoto; Kiyama, Seiichi [SANYO Electric Co. Ltd., New Materials Research Center, Moriguchi City, Osaka (Japan)

2003-02-01

Diagnostic technology for photovoltaic (PV) systems was developed, using the learning method to take each site's conditions into account. This technology employs diagnostic criteria databases to analyze data acquired from the PV systems. These criteria are updated monthly for each site using analyzed data. To check the shadows on the PV modules and pyranometer, the sophisticated verification method was also applied to this technology. After the diagnosis, a basket method provides maintenance advice for the PV systems. Based on the results of precise diagnoses, this expert system offers quick and proper maintenance advice within a few minutes. This technology is highly useful, because it greatly simplifies the servicing and maintenance of PV systems. (Author)

Toward a technology of derived stimulus relations: an analysis of articles published in the journal of applied behavior analysis, 1992-2009.

Science.gov (United States)

Rehfeldt, Ruth Anne

2011-01-01

Every article on stimulus equivalence or derived stimulus relations published in the Journal of Applied Behavior Analysis was evaluated in terms of characteristics that are relevant to the development of applied technologies: the type of participants, settings, procedure (automated vs. tabletop), stimuli, and stimulus sensory modality; types of relations targeted and emergent skills demonstrated by participants; and presence versus absence of evaluation of generalization and maintenance. In most respects, published reports suggested the possibility of applied technologies but left the difficult work of technology development to future investigations, suggestions for which are provided.

Applying the Extended Technology Acceptance Model to the Use of Clickers in Student Learning: Some Evidence from Macroeconomics Classes

Science.gov (United States)

Wu, Xiaoyu; Gao, Yuan

2011-01-01

This paper applies the extended technology acceptance model (exTAM) in information systems research to the use of clickers in student learning. The technology acceptance model (TAM) posits that perceived ease of use and perceived usefulness of technology influence users' attitudes toward using and intention to use technology. Research subsequent…

Applied clinical engineering

International Nuclear Information System (INIS)

Feinberg, B.

1986-01-01

This book demonstrates how clinical engineering has applied engineering principles to the development and use of complex medical devices for the diagnosis and treatment of the sick and injured. It discusses the proper utilization of medical devices and equipment in the health-care industry and provides understanding of complex engineering systems, and their uses in the modern hospital or other health-care facility

Applying high-resolution melting (HRM) technology to olive oil and wine authenticity.

Science.gov (United States)

Pereira, Leonor; Gomes, Sónia; Barrias, Sara; Fernandes, José Ramiro; Martins-Lopes, Paula

2018-01-01

Olive oil and wine production have a worldwide economic impact. Their market reliability is under great concern because of the increasing number of fraud and adulteration attempts. The need for a traceability system in all its extension is crucial particularly for the cases of olive oils and wines with certified labels, in which only a limited number of olives and grapevine varieties, respectively, are allowed in a restricted well-defined geographical area. Molecular markers have been vastly applied to the food sector, and in particular High-Resolution DNA Melting technology has been successfully applied for olive oil and wine authentication, as part of the traceability system. In this review, the applications of HRM and their usefulness for this sector considering, Safety, Security and Authenticity will be reviewed. A broad overview of the HRM technique will be presented, focusing on the aspects that are crucial for its success, in particular the new generation of fluorescent dsDNA dyes used for amplicon detection and quantification, and the data analysis. A brief outlook on the olive oil and wine authenticity procedures, based on new DNA technology advances, and in which way this may influence the future establishment of a traceability system will be discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Blending Web 2.0 Technologies with Developing of Writing Skills in ESL Classroom: Some Insights

Directory of Open Access Journals (Sweden)

Hind Talal Mashrah

2017-06-01

Full Text Available Recently, the educational field has adopted a new route for improving and increasing the way we learn languages, particularly English language, through using social networking services such as; Facebook, Twitter, YouTube, and other technologies in writing skills. In this respect, this paper discusses how ESL classroom can apply the social networking services or Web 2.0. Technologies effectively to promote learners' writing skills. The paper first details research studies about the characteristics of two social networking, Blogs and Wikis, to show the importance of implementing Web 2.0 technologies in writing skills. Then the benefits of applying social networking services as an essential approach for teaching and learning writing skills in L2 are presented. Paper also discusses the counter –argument, as opposite perspectives, that applying social networking websites is not always considered as a proper method to improve writing skills due to many reasons which may lead decreasing learners' level of English or make them far behind because of their difficulties they face when they use these technologies

Annual report to DOE of the fusion programs in applied plasma physics and development and technology at GA Technologies Inc., fiscal 1984

International Nuclear Information System (INIS)

Ohkawa, T.

1985-04-01

The GA programs in Applied Plasma Physics and Development and Technology have registered substantial accomplishments during fiscal 1984. Theoretical work in the MHD area has contributed to further understanding of the physics governing low-q, high-β tokamak discharges, including the effects of a cold plasma mantle and an edge-temperature pedestal. The universal scaling law for the maximum β stable to ideal-MHD modes has been verified for Doublet III and has also been validated for JET, DIII-D, and a Double Dee configuration. Experimental work in Applied Plasma Physics included the development of two new high-energy diagnostics, one for gamma rays and one for tritons (or, in a reactor, alpha particles), both of which can yield essential physics information that is not readily obtainable from the panoply of existing diagnostic instruments. The development of a current-density profile diagnostic continued, and it was found that the instrument could also be used to obtain relative density profiles throughout a tokamak discharge. And tests of an ergodic magnetic limiter scheme indicated that the configuration has the potential to create a stable, radiating boundary layer while reducing the heat load to the walls in future high-power devices. The work carried out in the area of Development and Technology included a group of reactor systems design studies that bring into focus some of the challenges that will be faced by the engineers of fusion power equipment. Closer to realization are advanced rf equipment and superconducting magnet developments, both under design in the area of plasma technologies. Technological developments that apply directly to current experiments as well as to future devices comprise the rest of the GA D and T program

An Investigation of Employees' Use of E-Learning Systems: Applying the Technology Acceptance Model

Science.gov (United States)

Lee, Yi-Hsuan; Hsieh, Yi-Chuan; Chen, Yen-Hsun

2013-01-01

The purpose of this study is to apply the technology acceptance model to examine the employees' attitudes and acceptance of electronic learning (e-learning) systems in organisations. This study examines four factors (organisational support, computer self-efficacy, prior experience and task equivocality) that are believed to influence employees'…

TOWARDS PROPER CULTURAL RESOURCE MANAGEMENT ...

African Journals Online (AJOL)

GRACE

proper harnessing and management of cultural resources in Nigeria for sustainable development .... and knowledge) to organize the resources available to man with the aim of optimizing their use in the ... needs‖ (World Bank 1992). Thus, as ...

Proper Islamic Consumption

DEFF Research Database (Denmark)

Fischer, Johan

mobile, religiously committed communities to the opportunities and perils presented by modernisation. It also tells us something about the debates concerning the meanings and practices of Islam within an aggressive, globalised, secularised modernity. In Malaysia this is an especially intriguing issue...... spite of a long line of social theory analyzing the spiritual in the economic, and vice versa, very little of the recent increase in scholarship on Islam addresses its relationship with capitalism. Johan Fischer’s book,Proper Islamic Consumption, begins to fill this gap. […] Fischer’s detailed...

The Role of Inflation and Price Escalation Adjustments in Properly Estimating Program Costs: F-35 Case Study

Science.gov (United States)

2016-04-30

qÜáêíÉÉåíÜ=^ååì~ä= ^Åèìáëáíáçå=oÉëÉ~êÅÜ= póãéçëáìã= qÜìêëÇ~ó=pÉëëáçåë= sçäìãÉ=ff= = The Role of Inflation and Price Escalation Adjustments in Properly...The Role of Inflation and Price Escalation Adjustments in Properly Estimating Program Costs: F-35 Case Study Stanley Horowitz, Assistant Division...Graduate School of Engineering and Management, Air Force Institute of Technology Cost and Price Collaboration Venkat Rao, Professor, Defense

INTERNAL PROPER MOTIONS IN THE ESKIMO NEBULA

International Nuclear Information System (INIS)

García-Díaz, Ma. T.; Gutiérrez, L.; Steffen, W.; López, J. A.; Beckman, J.

2015-01-01

We present measurements of internal proper motions at more than 500 positions of NGC 2392, the Eskimo Nebula, based on images acquired with WFPC2 on board the Hubble Space Telescope at two epochs separated by 7.695 yr. Comparisons of the two observations clearly show the expansion of the nebula. We measured the amplitude and direction of the motion of local structures in the nebula by determining their relative shift during that interval. In order to assess the potential uncertainties in the determination of proper motions in this object, in general, the measurements were performed using two different methods, used previously in the literature. We compare the results from the two methods, and to perform the scientific analysis of the results we choose one, the cross-correlation method, because it is more reliable. We go on to perform a ''criss-cross'' mapping analysis on the proper motion vectors, which helps in the interpretation of the velocity pattern. By combining our results of the proper motions with radial velocity measurements obtained from high resolution spectroscopic observations, and employing an existing 3D model, we estimate the distance to the nebula to be 1.3 kpc

INTERNAL PROPER MOTIONS IN THE ESKIMO NEBULA

Energy Technology Data Exchange (ETDEWEB)

García-Díaz, Ma. T.; Gutiérrez, L.; Steffen, W.; López, J. A. [Instituto de Astronomía, Universidad Nacional Autónoma de México, Km 103 Carretera Tijuana-Ensenada, 22860 Ensenada, B.C. (Mexico); Beckman, J., E-mail: tere@astro.unam.mx, E-mail: leonel@astro.unam.mx, E-mail: wsteffen@astro.unam.mx, E-mail: jal@astro.unam.mx, E-mail: jeb@iac.es [Instituto de Astrofísica de Canarias, La Laguna, Tenerife (Spain)

2015-01-10

We present measurements of internal proper motions at more than 500 positions of NGC 2392, the Eskimo Nebula, based on images acquired with WFPC2 on board the Hubble Space Telescope at two epochs separated by 7.695 yr. Comparisons of the two observations clearly show the expansion of the nebula. We measured the amplitude and direction of the motion of local structures in the nebula by determining their relative shift during that interval. In order to assess the potential uncertainties in the determination of proper motions in this object, in general, the measurements were performed using two different methods, used previously in the literature. We compare the results from the two methods, and to perform the scientific analysis of the results we choose one, the cross-correlation method, because it is more reliable. We go on to perform a ''criss-cross'' mapping analysis on the proper motion vectors, which helps in the interpretation of the velocity pattern. By combining our results of the proper motions with radial velocity measurements obtained from high resolution spectroscopic observations, and employing an existing 3D model, we estimate the distance to the nebula to be 1.3 kpc.

A survey on the automatic object tracking technology using video signals

International Nuclear Information System (INIS)

Lee, Jae Cheol; Jun, Hyeong Seop; Choi, Yu Rak; Kim, Jae Hee

2003-01-01

Recently, automatic identification and tracking of the object are actively studied according to the rapid development of signal processing and vision technology using improved hardware and software. The object tracking technology can be applied to various fields such as road watching of the vehicles, weather satellite, traffic observation, intelligent remote video-conferences and autonomous mobile robots. Object tracking system receives subsequent pictures from the camera and detects motions of the objects in these pictures. In this report, we investigate various object tracking techniques such as brightness change using histogram characteristic, differential image analysis, contour and feature extraction, and try to find proper methods that can be used to mobile robots actually

The Chemical Technology Division at Argonne National Laboratory: Applying chemical innovation to environmental problems

International Nuclear Information System (INIS)

1995-01-01

The Chemical Technology Division is one of the largest technical divisions at Argonne National Laboratory, a leading center for research and development related to energy and environmental issues. Since its inception in 1948, the Division has pioneered in developing separations processes for the nuclear industry. The current scope of activities includes R ampersand D on methods for disposing of radioactive and hazardous wastes and on energy conversion processes with improved efficiencies, lower costs, and reduced environmental impact. Many of the technologies developed by CMT can be applied to solve manufacturing as well as environmental problems of industry

Proper-time resolution function for measurement of time evolution of B mesons at the KEK B-Factory

International Nuclear Information System (INIS)

Tajima, H.; Aihara, H.; Higuchi, T.; Kawai, H.; Nakadaira, T.; Tanaka, J.; Tomura, T.; Yokoyama, M.; Hazumi, M.; Sakai, Y.; Sumisawa, K.; Kawasaki, T.

2004-01-01

The proper-time resolution function for the measurement of the time evolution of B mesons with the Belle detector at KEKB is studied in detail. The obtained resolution function is applied to the measurement of B meson lifetimes, the B0B-bar 0 oscillation frequency and time-dependent CP asymmetries

Proper laboratory notebook practices: protecting your intellectual property.

Science.gov (United States)

Nickla, Jason T; Boehm, Matthew B

2011-03-01

A laboratory notebook contains a wealth of knowledge that can be critical for establishing evidence in support of intellectual property rights and for refuting claims of research misconduct. The proper type, organization, use, maintenance, and storage of laboratory notebooks should be a priority for everyone at research institutions. Failure to properly document research activities can lead to serious problems, including the loss of valuable patent rights. Consequences of improper laboratory notebook practices can be harsh; numerous examples are described in court cases and journal articles, indicating a need for research institutions to develop strict policies on the proper use and storage of research documentation.

Comparison of Methods of Teaching Children Proper Lifting ...

African Journals Online (AJOL)

Objective: This study was designed to determine the effects of three teaching methods on children\\'s ability to demonstrate and recall their mastery of proper lifting techniques. Method: Ninety-three primary five and six public school children who had no knowledge of proper lifting technique were assigned into three equal ...

Optical waveguiding and applied photonics technological aspects, experimental issue approaches and measurements

CERN Document Server

Massaro, Alessandro

2012-01-01

Optoelectronics--technology based on applications light such as micro/nano quantum electronics, photonic devices, laser for measurements and detection--has become an important field of research. Many applications and physical problems concerning optoelectronics are analyzed in Optical Waveguiding and Applied Photonics.The book is organized in order to explain how to implement innovative sensors starting from basic physical principles. Applications such as cavity resonance, filtering, tactile sensors, robotic sensor, oil spill detection, small antennas and experimental setups using lasers are a

40 CFR 51.912 - What requirements apply for reasonably available control technology (RACT) and reasonably...

Science.gov (United States)

2010-07-01

...) What is the Reasonably Available Control Measures (RACM) requirement for areas designated nonattainment... 40 Protection of Environment 2 2010-07-01 2010-07-01 false What requirements apply for reasonably available control technology (RACT) and reasonably available control measures (RACM) under the 8-hour NAAQS...

Applying Questioning or Reading Strategy to Review Technology Enhanced Coedited Notes of Elementary School Students

Science.gov (United States)

Chiu, Chiung-Hui; Cheng, Hsiao-Wei; Wu, Chiu-Yi

2016-01-01

The authors examined whether applying questioning review better enhances elementary level students' learning from technology-enhanced coediting-based note taking than does traditional reading review. A nonequivalent comparison group quasi-experimental design was implemented and replicated on four independent units. Two sixth grade elementary…

Applying the accelerator

Energy Technology Data Exchange (ETDEWEB)

Barbalat, Oscar

1989-12-15

Originally developed as tools for frontier physics, particle accelerators provide valuable spinoff benefits in applied research and technology. These accelerator applications are the subject of a biennial meeting in Denton, Texas, but the increasing activity in this field resulted this year (5-9 September) in the first European Conference on Accelerators in Applied Research and Technology, organized by K. Bethge of Frankfurt's Goethe University. The meeting reflected a wide range of applications - ion beam analysis, exploitation of nuclear microbeams, accelerator mass spectrometry, applications of photonuclear reactions, ion beam processing, synchrotron radiation for semiconductor technology, specialized technology.

Applying the accelerator

International Nuclear Information System (INIS)

Barbalat, Oscar

1989-01-01

Originally developed as tools for frontier physics, particle accelerators provide valuable spinoff benefits in applied research and technology. These accelerator applications are the subject of a biennial meeting in Denton, Texas, but the increasing activity in this field resulted this year (5-9 September) in the first European Conference on Accelerators in Applied Research and Technology, organized by K. Bethge of Frankfurt's Goethe University. The meeting reflected a wide range of applications - ion beam analysis, exploitation of nuclear microbeams, accelerator mass spectrometry, applications of photonuclear reactions, ion beam processing, synchrotron radiation for semiconductor technology, specialized technology

Applying Sensor Web Technology to Marine Sensor Data

Science.gov (United States)

Jirka, Simon; del Rio, Joaquin; Mihai Toma, Daniel; Nüst, Daniel; Stasch, Christoph; Delory, Eric

2015-04-01

SWE specifications that provide stricter guidance how these standards shall be applied to marine data (e.g. SensorML 2.0 profiles stating which metadata elements are mandatory building upon the ESONET Sensor Registry developments, etc.). Within the NeXOS project the presented architecture is implemented as a set of open source components. These implementations can be re-used by all interested scientists and data providers needing tools for publishing or consuming oceanographic sensor data. In further projects such as the European project FixO3 (Fixed-point Open Ocean Observatories), these software development activities are complemented with additional efforts to provide guidance how Sensor Web technology can be applied in an efficient manner. This way, not only software components are made available but also documentation and information resources that help to understand which types of Sensor Web deployments are best suited to fulfil different types of user requirements.

Archetypes: the PropeR way

NARCIS (Netherlands)

van der Linden, Helma; Grimson, Jane; Tange, Huibert; Talmon, Jan; Hasman, Arie

2004-01-01

The PropeR project studies the effect of Decision Support in an Electronic Health Record system (EHR) on the quality of care. One of the applications supports a multidisciplinary primary care team rehabilitating stroke patients in their home environment. This project required an EHR system that

D and D Toolbox Project - Technology Demonstration of Fixatives Applied to Hot Cell Facilities via Remote Sprayer Platforms

International Nuclear Information System (INIS)

Lagos, L.; Shoffner, P.; Espinosa, E.; Pena, G.; Kirk, P.; Conley, T.

2009-01-01

The objective of the US Department of Energy Office of Environmental Management's (DOE-EM's) D and D Toolbox Project is to use an integrated systems approach to develop a suite of decontamination and decommissioning (D and D) technologies, a D and D toolbox, that can be readily used across the DOE complex to improve safety, reduce technical risks, and limit uncertainty within D and D operations. Florida International University's Applied Research Center (FIU-ARC) is supporting this initiative by identifying technologies suitable to meet specific facility D and D requirements, assessing the readiness of those technologies for field deployment, and conducting technology demonstrations of selected technologies at FIU-ARC facilities in Miami, Florida. To meet the technology gap challenge for a technology to remotely apply strippable/fixative coatings, FIU-ARC identified and demonstrated of a remote fixative sprayer platform. During this process, FIU-ARC worked closely with the Oak Ridge National Laboratory in the selection of typical fixatives and in the design of a hot cell mockup facility for demonstrations at FIUARC. For this demonstration and for future demonstrations, FIU-ARC built a hot cell mockup facility at the FIU-ARC Technology Demonstration/Evaluation site in Miami, Florida. FIU-ARC selected the International Climbing Machines' (ICM's) Robotic Climber to perform this technology demonstration. The selected technology was demonstrated at the hot cell mockup facility at FIU-ARC during the week of November 10, 2008. Fixative products typically used inside hot cells were investigated and selected for this remote application. The fixatives tested included Sherwin Williams' Promar 200 and DTM paints and Bartlett's Polymeric Barrier System (PBS). The technology evaluation documented the ability of the remote system to spray fixative products on horizontal and vertical concrete surfaces. The technology performance, cost, and health and safety issues were evaluated

Using applied behavior analysis and smart technology for meeting the health needs of individuals with intellectual disabilities.

Science.gov (United States)

Haymes, Linda K; Storey, Keith; Maldonado, Ana; Post, Michal; Montgomery, Joyce

2015-01-01

Individuals with intellectual disabilities often have special healthcare concerns such as diabetes, kidney disease, severe allergies, progressive illnesses, respiratory weaknesses, and obesity. Smart technology can be an asset for individuals with intellectual disabilities for better managing their healthcare needs. A critical review of the literature related to applied behavior analysis, smart technology, and health needs of individuals with intellectual disabilities was conducted. This discussion paper describes factors that contribute to the successful use of smart technology for the health issues of individuals with intellectual disabilities. We see key components in developing appropriate access and use of smart technology for the health of people with intellectual disabilities being: (a) systematic instructional methods for consistent and accurate use of the technology, (b) modifying the current technology for people with intellectual disabilities, (c) guidelines for implementation, and (d) resources for getting the technology.

Investigating Elementary School Students' Technology Acceptance by Applying Digital Game-Based Learning to Environmental Education

Science.gov (United States)

Cheng, Yuh-Ming; Lou, Shi-Jer; Kuo, Sheng-Huang; Shih, Ru-Chu

2013-01-01

In order to improve and promote students' environmental knowledge, attitudes, and behaviour, integrating environmental education into the primary education curriculum has become a key issue for environmental education. For this reason, this study aimed to investigate elementary school students' acceptance of technology applying digital game-based…

Fate of trace element haps when applying mercury control technologies

Energy Technology Data Exchange (ETDEWEB)

Nyberg, Carolyn M.; Thompson, Jeffrey S.; Zhuang, Ye; Pavlish, John H. [University of North Dakota Energy and Environmental Research Center 15 North 23rd Street, Stop 9018, Grand Forks, North Dakota 58202-9018 (United States); Brickett, Lynn; Pletcher, Sara [U.S. Department of Energy National Energy Technology Laboratory 626 Cochrans Mill Road, PO Box 10940, MS 922-273C, Pittsburgh, PA 15236-0940 (United States)

2009-11-15

During the past several years, and particularly since the Clean Air Mercury Rule (CAMR) was promulgated in June of 2005, the electric utility industry, product vendors, and the research community have been working diligently to develop and test Hg control strategies for a variety of coal types and plant configurations. Some of these strategies include sorbent injection and chemical additives designed to increase mercury capture efficiency in particulate control devices. These strategies have the potential to impact the fate of other inorganic hazardous air pollutants (HAPs), which typically include As, Be, Cd, Cr, Co, Mn, Ni, Pb, Se, and Sb. To evaluate this impact, flue gas samples using EPA Method 29, along with representative coal and ash samples, were collected during recent pilot-scale and field test projects that were evaluating Hg control technologies. These test programs included a range of fuel types with varying trace element concentrations, along with different combustion systems and particulate control devices. The results show that the majority of the trace element HAPs are associated with the particulate matter in the flue gas, except for Se. However, for five of the six projects, Se partitioning was shifted to the particulate phase and total emissions reduced when Hg control technologies were applied. (author)

Properly Applying the Military Decision Making Process in Low Intensity Conflict and Small Scale Contingencies

National Research Council Canada - National Science Library

Wilson, Todd

2001-01-01

The purpose of this thesis is to demonstrate that current doctrine, applied effectively through the Military Decision Making Process, is more than adequate to the task of providing military planners...

KEBIJAKAN PENGELOLAAN LINGKUNGAN KAWASAN INDUSTRI SESUAI PROPER KLHK PERINGKAT HIJAU (STUDI KASUS DI KAWASAN INDUSTRI JABABEKA BEKASI

Directory of Open Access Journals (Sweden)

Temmy Wikaningrum

2015-07-01

Full Text Available Environmental management in industrial estate is the strategic policy model which is needed to be developed referring to the Indonesian Government Decree number 24 year 2009, that state almost all of the new industrial developments should be located in industrial estate. The complexity in this environmental management was approached by “green rating” of PROPER’s criteria regulated by Ministry of Environment & Forestry (KLHK. PROPER is the assessment program of company performance rating in environmental management. Green rating is classified by PROPER in terms of beyond compliance performance. The result of the case study in Jababeka Industrial Estate (KIJA Bekasi, based on its environmental situational analysis year 2014 by multidimensional scaling (MDS method, showed that only the management dimension had a sustainability performance. The results of prospective analysis on leverage factors of MDS showed that the key factors of the environmental management model were (1 DRKPL (summary document of environmental management performance, (2 implementation of water conservation and reducing water pollution program, (3funding for water conservation, (4 monitoring and evaluation of community development program, (5 implementation of 3R (reduce, reuse, recycle programs of hazardous waste, (6 technology of 3R, and (7 benchmarking. Based on the key parameters and referred to the possibilities conditions, three scenarios have been developed to approach the implementative policy. The moderate scenario was recommended to be the right policy in term of consideration of technology, funding availability, time of implementation and organization skills.Keywords: environmental management, industrial estate, jababeka, proper KLHK

Smarandachely Adjacent-Vertex-Distinguishing Proper Edge Chromatic Number of Cm∨Kn

OpenAIRE

Shunqin Liu

2016-01-01

According to different conditions, researchers have defined a great deal of coloring problems and the corresponding chromatic numbers. Such as, adjacent-vertex-distinguishing total chromatic number, adjacent-vertex-distinguishing proper edge chromatic number, smarandachely-adjacent-vertex-distinguishing proper edge chromatic number, smarandachely-adjacent-vertex-distinguishing proper total chromatic number. And we focus on the smarandachely adjacent-vertex-distinguishing proper edge chromatic...

The VMC survey. XXVIII. Improved measurements of the proper motion of the Galactic globular cluster 47 Tucanae

Science.gov (United States)

Niederhofer, Florian; Cioni, Maria-Rosa L.; Rubele, Stefano; Schmidt, Thomas; Bekki, Kenji; de Grijs, Richard; Emerson, Jim; Ivanov, Valentin D.; Oliveira, Joana M.; Petr-Gotzens, Monika G.; Ripepi, Vincenzo; Sun, Ning-Chen; van Loon, Jacco Th.

2018-05-01

We use deep multi-epoch point-spread function (PSF) photometry taken with the Visible and Infrared Survey Telescope for Astronomy (VISTA) to measure and analyze the proper motions of stars within the Galactic globular cluster 47 Tucanae (47 Tuc, NGC 104). The observations are part of the ongoing near-infrared VISTA survey of the Magellanic Cloud system (VMC). The data analyzed in this study correspond to one VMC tile, which covers a total sky area of 1.77 deg2. Absolute proper motions with respect to 9070 background galaxies are calculated from a linear regression model applied to the positions of stars in 11 epochs in the Ks filter. The data extend over a total time baseline of about 17 months. We found an overall median proper motion of the stars within 47 Tuc of (μαcos(δ), μδ) = (+5.89 ± 0.02 (statistical) ± 0.13 (systematic), -2.14 ± 0.02 (statistical) ± 0.08 (systematic)) mas yr-1, based on the measurements of 35 000 individual sources between 5' and 42' from the cluster center. We compared our result to the proper motions from the newest US Naval Observatory CCD Astrograph Catalog (UCAC5), which includes data from the Gaia data release 1. Selecting cluster members ( 2700 stars), we found a median proper motion of (μαcos(δ), μδ) = (+5.30 ± 0.03 (statistical) ± 0.70 (systematic), -2.70 ± 0.03 (statistical) ± 0.70 (systematic)) mas yr-1. Comparing the results with measurements in the literature, we found that the values derived from the VMC data are consistent with the UCAC5 result, and are close to measurements obtained using the Hubble Space Telescope. We combined our proper motion results with radial velocity measurements from the literature and reconstructed the orbit of 47 Tuc, finding that the cluster is on an orbit with a low ellipticity and is confined within the inner 7.5 kpc of the Galaxy. We show that the use of an increased time baseline in combination with PSF-determined stellar centroids in crowded regions significantly improves

The impact of assay technology as applied to safety assessment in reducing compound attrition in drug discovery.

Science.gov (United States)

Thomas, Craig E; Will, Yvonne

2012-02-01

Attrition in the drug industry due to safety findings remains high and requires a shift in the current safety testing paradigm. Many companies are now positioning safety assessment at each stage of the drug development process, including discovery, where an early perspective on potential safety issues is sought, often at chemical scaffold level, using a variety of emerging technologies. Given the lengthy development time frames of drugs in the pharmaceutical industry, the authors believe that the impact of new technologies on attrition is best measured as a function of the quality and timeliness of candidate compounds entering development. The authors provide an overview of in silico and in vitro models, as well as more complex approaches such as 'omics,' and where they are best positioned within the drug discovery process. It is important to take away that not all technologies should be applied to all projects. Technologies vary widely in their validation state, throughput and cost. A thoughtful combination of validated and emerging technologies is crucial in identifying the most promising candidates to move to proof-of-concept testing in humans. In spite of the challenges inherent in applying new technologies to drug discovery, the successes and recognition that we cannot continue to rely on safety assessment practices used for decades have led to rather dramatic strategy shifts and fostered partnerships across government agencies and industry. We are optimistic that these efforts will ultimately benefit patients by delivering effective and safe medications in a timely fashion.

3rd ACIS International Conference on Applied Computing and Information Technology

CERN Document Server

2016-01-01

This edited book presents scientific results of the 3nd International Conference on Applied Computing and Information Technology (ACIT 2015) which was held on July 12-16, 2015 in Okayama, Japan. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. Research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them.

Preconditioned dynamic mode decomposition and mode selection algorithms for large datasets using incremental proper orthogonal decomposition

Science.gov (United States)

Ohmichi, Yuya

2017-07-01

In this letter, we propose a simple and efficient framework of dynamic mode decomposition (DMD) and mode selection for large datasets. The proposed framework explicitly introduces a preconditioning step using an incremental proper orthogonal decomposition (POD) to DMD and mode selection algorithms. By performing the preconditioning step, the DMD and mode selection can be performed with low memory consumption and therefore can be applied to large datasets. Additionally, we propose a simple mode selection algorithm based on a greedy method. The proposed framework is applied to the analysis of three-dimensional flow around a circular cylinder.

Sustaining high energy efficiency in existing processes with advanced process integration technology

International Nuclear Information System (INIS)

Zhang, Nan; Smith, Robin; Bulatov, Igor; Klemeš, Jiří Jaromír

2013-01-01

Highlights: ► Process integration with better modelling and more advanced solution methods. ► Operational changes for better environmental performance through optimisation. ► Identification of process integration technology for operational optimisation. ► Systematic implementation procedure of process integration technology. ► A case study with crude oil distillation to demonstrate the operational flexibility. -- Abstract: To reduce emissions in the process industry, much emphasis has been put on making step changes in emission reduction, by developing new process technology and making renewable energy more affordable. However, the energy saving potential of existing systems cannot be simply ignored. In recent years, there have been significant advances in process integration technology with better modelling techniques and more advanced solution methods. These methods have been applied to the new design and retrofit studies in the process industry. Here attempts are made to apply these technologies to improve the environmental performance of existing facilities with operational changes. An industrial project was carried out to demonstrate the importance and effectiveness of exploiting the operational flexibility for energy conservation. By applying advanced optimisation technique to integrate the operation of distillation and heat recovery in a crude oil distillation unit, the energy consumption was reduced by 8% without capital expenditure. It shows that with correctly identified technology and the proper execution procedure, significant energy savings and emission reduction can be achieved very quickly without major capital expenditure. This allows the industry to improve its economic and environment performance at the same time.

Evidence-based medicine in rapidly changing technologies

DEFF Research Database (Denmark)

Schroeder, Torben Veith

2008-01-01

Evidence-based medicine (EBM) is not a randomised controlled trial (RCT), but EBM seeks to apply evidence gained from scientific methods - which could be RCT - to daily medical practice. Any surgical treatment reflects a certain development technically as well as skills based. The procedure may....... Special considerations should be given in rapidly developing fields. If started too early the resulting comparison will likely turn out to be irrelevant because the new technology is not fully developed, not mastered or the device may have undergone major modifications rendering the results obsolete....... On the other hand, if started too late there is a chance that data may be lost because the technology has already been introduced into the daily clinics and physicians may be unwilling to recruit patients. Or the opposite, that the technique may have been rejected without a proper trial. In this situation...

APA Summit on Medical Student Education Task Force on Informatics and Technology: learning about computers and applying computer technology to education and practice.

Science.gov (United States)

Hilty, Donald M; Hales, Deborah J; Briscoe, Greg; Benjamin, Sheldon; Boland, Robert J; Luo, John S; Chan, Carlyle H; Kennedy, Robert S; Karlinsky, Harry; Gordon, Daniel B; Yager, Joel; Yellowlees, Peter M

2006-01-01

This article provides a brief overview of important issues for educators regarding medical education and technology. The literature describes key concepts, prototypical technology tools, and model programs. A work group of psychiatric educators was convened three times by phone conference to discuss the literature. Findings were presented to and input was received from the 2005 Summit on Medical Student Education by APA and the American Directors of Medical Student Education in Psychiatry. Knowledge of, skills in, and attitudes toward medical informatics are important to life-long learning and modern medical practice. A needs assessment is a starting place, since student, faculty, institution, and societal factors bear consideration. Technology needs to "fit" into a curriculum in order to facilitate learning and teaching. Learning about computers and applying computer technology to education and clinical care are key steps in computer literacy for physicians.

The Southern Proper Motion Program. IV. The SPM4 Catalog

Science.gov (United States)

Girard, Terrence M.; van Altena, William F.; Zacharias, Norbert; Vieira, Katherine; Casetti-Dinescu, Dana I.; Castillo, Danilo; Herrera, David; Lee, Young Sun; Beers, Timothy C.; Monet, David G.; López, Carlos E.

2011-07-01

We present the fourth installment of the Yale/San Juan Southern Proper Motion Catalog, SPM4. The SPM4 contains absolute proper motions, celestial coordinates, and B, V photometry for over 103 million stars and galaxies between the south celestial pole and -20° declination. The catalog is roughly complete to V = 17.5 and is based on photographic and CCD observations taken with the Yale Southern Observatory's double astrograph at Cesco Observatory in El Leoncito, Argentina. The proper-motion precision, for well-measured stars, is estimated to be 2-3 mas yr-1, depending on the type of second-epoch material. At the bright end, proper motions are on the International Celestial Reference System by way of Hipparcos Catalog stars, while the faint end is anchored to the inertial system using external galaxies. Systematic uncertainties in the absolute proper motions are on the order of 1 mas yr-1.

The monocular visual imaging technology model applied in the airport surface surveillance

Science.gov (United States)

Qin, Zhe; Wang, Jian; Huang, Chao

2013-08-01

At present, the civil aviation airports use the surface surveillance radar monitoring and positioning systems to monitor the aircrafts, vehicles and the other moving objects. Surface surveillance radars can cover most of the airport scenes, but because of the terminals, covered bridges and other buildings geometry, surface surveillance radar systems inevitably have some small segment blind spots. This paper presents a monocular vision imaging technology model for airport surface surveillance, achieving the perception of scenes of moving objects such as aircrafts, vehicles and personnel location. This new model provides an important complement for airport surface surveillance, which is different from the traditional surface surveillance radar techniques. Such technique not only provides clear objects activities screen for the ATC, but also provides image recognition and positioning of moving targets in this area. Thereby it can improve the work efficiency of the airport operations and avoid the conflict between the aircrafts and vehicles. This paper first introduces the monocular visual imaging technology model applied in the airport surface surveillance and then the monocular vision measurement accuracy analysis of the model. The monocular visual imaging technology model is simple, low cost, and highly efficient. It is an advanced monitoring technique which can make up blind spot area of the surface surveillance radar monitoring and positioning systems.

OPTICAL correlation identification technology applied in underwater laser imaging target identification

Science.gov (United States)

Yao, Guang-tao; Zhang, Xiao-hui; Ge, Wei-long

2012-01-01

The underwater laser imaging detection is an effective method of detecting short distance target underwater as an important complement of sonar detection. With the development of underwater laser imaging technology and underwater vehicle technology, the underwater automatic target identification has gotten more and more attention, and is a research difficulty in the area of underwater optical imaging information processing. Today, underwater automatic target identification based on optical imaging is usually realized with the method of digital circuit software programming. The algorithm realization and control of this method is very flexible. However, the optical imaging information is 2D image even 3D image, the amount of imaging processing information is abundant, so the electronic hardware with pure digital algorithm will need long identification time and is hard to meet the demands of real-time identification. If adopt computer parallel processing, the identification speed can be improved, but it will increase complexity, size and power consumption. This paper attempts to apply optical correlation identification technology to realize underwater automatic target identification. The optics correlation identification technology utilizes the Fourier transform characteristic of Fourier lens which can accomplish Fourier transform of image information in the level of nanosecond, and optical space interconnection calculation has the features of parallel, high speed, large capacity and high resolution, combines the flexibility of calculation and control of digital circuit method to realize optoelectronic hybrid identification mode. We reduce theoretical formulation of correlation identification and analyze the principle of optical correlation identification, and write MATLAB simulation program. We adopt single frame image obtained in underwater range gating laser imaging to identify, and through identifying and locating the different positions of target, we can improve

Editorial: The proper place for knowledge

Directory of Open Access Journals (Sweden)

Yngve Nordkvelle

2009-11-01

Full Text Available Knowledge is an interesting word, which never goes out of fashion. In the political context, knowledge is something everyone hails and cherishes. An example is that the Socialist Government in Norway renamed its "Ministry of Education and Research" to the "Ministry of Knowledge". It would probably be politically wrong to defy the word "knowledge". The word "knowledge" stirs, however, different sentiments in people. In modern education, the word signifies something notable, discernable, visual or at least possible to distinguish from what it is not. In learning in higher education, knowledge is most often considered as the raw material for learning, with the little extra that distinguishes it from "information". Knowledge is information with a direction, a purpose and meaning, but without the implied cultivation of a teaching and learning process. Given knowledge is used for educational purposes, the processing of knowledge from its basic concepts to embodied and reflected knowledge, properly understood and reconceptualised by the learner, transforms not only the learner, but also the knowledge. In a peripatetic tradition, one likes to think of knowledge as foundation elements for constructions of ethical wisdom as its highest reflective level. Probably we will never see a "Ministry of Wisdom" established, because what is "wisdom" is probably so much more politically charged than "Knowledge". One can only wonder why anyone would degrade a ministry for education to something less. In Europe a rewriting of university curricula is underway all over the continent, because "knowledge" is a key concept in the writing of "learning outcomes". It appears every college is absorbed in sorting out what knowledge is and how knowledge can be classified in categories and levels, and then composed to readable descriptions of syllabi, course descriptions and schemes. Let us hope they are more able than what has been the case. Professor Ronald Barnett of the

Materials technology applied to nuclear accelerator targets

International Nuclear Information System (INIS)

Barthell, B.L.

1986-01-01

The continuing requests for both shaped and flat, very low areal density metal foils have led to the development of metallurgical quality, high strength products. Intent of this paper is to show methods of forming structures on various substrates using periodic vapor interruptions, alternating anodes, and mechanical peening to alter otherwise unacceptable grain morphology which both lowers tensile strength and causes high stresses in thin films. The three technologies, physical vapor deposition, electrochemistry, and chemical vapor deposition and their thin film products can benefit from the use of laminate technology and control of grain structure morphology through the use of materials research and technology

Applying XML-Based Technologies to Developing Online Courses: The Case of a Prototype Learning Environment

Science.gov (United States)

Jedrzejowicz, Joanna; Neumann, Jakub

2007-01-01

Purpose: This paper seeks to describe XML technologies and to show how they can be applied for developing web-based courses and supporting authors who do not have much experience with the preparation of web-based courses. Design/methodology/approach: When developing online courses the academic staff has to address the following problem--how to…

What can Gaia proper motions tell us about Milky Way dwarf galaxies?

NARCIS (Netherlands)

Jin, S.; Helmi, A.; Breddels, M.

We present a proper-motion study on models of the dwarf spheroidal galaxy Sculptor, based on the predicted proper-motion accuracy of Gaia measurements. Gaia will measure proper motions of several hundreds of stars for a Sculptor-like system. Even with an uncertainty on the proper motion of order 1.5

Applying the technology of hydrodynamic cavitation treatment of high-viscosity oils to increase the efficiency of transportation

Science.gov (United States)

Brand, A. E.; Vershinina, S. V.; Vengerov, A. A.; Mostovaya, N. A.

2015-10-01

The article investigates the possibility of applying hydrodynamic cavitation treatment to reduce oil viscosity in Russian pipeline transportation system and increase its performance. The result of laboratory tests and suggestions on technology application are given

Embedded Web Technology: Internet Technology Applied to Real-Time System Control

Science.gov (United States)

Daniele, Carl J.

1998-01-01

The NASA Lewis Research Center is developing software tools to bridge the gap between the traditionally non-real-time Internet technology and the real-time, embedded-controls environment for space applications. Internet technology has been expanding at a phenomenal rate. The simple World Wide Web browsers (such as earlier versions of Netscape, Mosaic, and Internet Explorer) that resided on personal computers just a few years ago only enabled users to log into and view a remote computer site. With current browsers, users not only view but also interact with remote sites. In addition, the technology now supports numerous computer platforms (PC's, MAC's, and Unix platforms), thereby providing platform independence.In contrast, the development of software to interact with a microprocessor (embedded controller) that is used to monitor and control a space experiment has generally been a unique development effort. For each experiment, a specific graphical user interface (GUI) has been developed. This procedure works well for a single-user environment. However, the interface for the International Space Station (ISS) Fluids and Combustion Facility will have to enable scientists throughout the world and astronauts onboard the ISS, using different computer platforms, to interact with their experiments in the Fluids and Combustion Facility. Developing a specific GUI for all these users would be cost prohibitive. An innovative solution to this requirement, developed at Lewis, is to use Internet technology, where the general problem of platform independence has already been partially solved, and to leverage this expanding technology as new products are developed. This approach led to the development of the Embedded Web Technology (EWT) program at Lewis, which has the potential to significantly reduce software development costs for both flight and ground software.

5 CFR 2635.205 - Proper disposition of prohibited gifts.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Proper disposition of prohibited gifts... STANDARDS OF ETHICAL CONDUCT FOR EMPLOYEES OF THE EXECUTIVE BRANCH Gifts From Outside Sources § 2635.205 Proper disposition of prohibited gifts. (a) An employee who has received a gift that cannot be accepted...

Research on orbit prediction for solar-based calibration proper satellite

Science.gov (United States)

Chen, Xuan; Qi, Wenwen; Xu, Peng

2018-03-01

Utilizing the mathematical model of the orbit mechanics, the orbit prediction is to forecast the space target's orbit information of a certain time based on the orbit of the initial moment. The proper satellite radiometric calibration and calibration orbit prediction process are introduced briefly. On the basis of the research of the calibration space position design method and the radiative transfer model, an orbit prediction method for proper satellite radiometric calibration is proposed to select the appropriate calibration arc for the remote sensor and to predict the orbit information of the proper satellite and the remote sensor. By analyzing the orbit constraint of the proper satellite calibration, the GF-1solar synchronous orbit is chose as the proper satellite orbit in order to simulate the calibration visible durance for different satellites to be calibrated. The results of simulation and analysis provide the basis for the improvement of the radiometric calibration accuracy of the satellite remote sensor, which lays the foundation for the high precision and high frequency radiometric calibration.

Globular Clusters: Absolute Proper Motions and Galactic Orbits

Science.gov (United States)

Chemel, A. A.; Glushkova, E. V.; Dambis, A. K.; Rastorguev, A. S.; Yalyalieva, L. N.; Klinichev, A. D.

2018-04-01

We cross-match objects from several different astronomical catalogs to determine the absolute proper motions of stars within the 30-arcmin radius fields of 115 Milky-Way globular clusters with the accuracy of 1-2 mas yr-1. The proper motions are based on positional data recovered from the USNO-B1, 2MASS, URAT1, ALLWISE, UCAC5, and Gaia DR1 surveys with up to ten positions spanning an epoch difference of up to about 65 years, and reduced to Gaia DR1 TGAS frame using UCAC5 as the reference catalog. Cluster members are photometrically identified by selecting horizontal- and red-giant branch stars on color-magnitude diagrams, and the mean absolute proper motions of the clusters with a typical formal error of about 0.4 mas yr-1 are computed by averaging the proper motions of selected members. The inferred absolute proper motions of clusters are combined with available radial-velocity data and heliocentric distance estimates to compute the cluster orbits in terms of the Galactic potential models based on Miyamoto and Nagai disk, Hernquist spheroid, and modified isothermal dark-matter halo (axisymmetric model without a bar) and the same model + rotating Ferre's bar (non-axisymmetric). Five distant clusters have higher-than-escape velocities, most likely due to large errors of computed transversal velocities, whereas the computed orbits of all other clusters remain bound to the Galaxy. Unlike previously published results, we find the bar to affect substantially the orbits of most of the clusters, even those at large Galactocentric distances, bringing appreciable chaotization, especially in the portions of the orbits close to the Galactic center, and stretching out the orbits of some of the thick-disk clusters.

Microorganisms applying for artificial soil regeneration technology in space greenhouses

Science.gov (United States)

Krivobok, A. S.

2012-04-01

The space greenhouse and technology for growing plants are being designed in frame of bio-technical life support systems development. During long-term space missions such greenhouse could provide the crew with vitamins and rough plant fiber. One of the important elements of the plant cultivation technology in the absence of earth gravity is organization and support the optimum root area. The capillary-porous substrate composed of anionites (FIBAN -1) and cationites (FIBAN -22-1) synthetic salt-saturated fibers is developed for plant cultivation in space and named "BIONA-V3". The BIONA main features are high productivity and usability. But the pointed features are not constant: the substrate productivity will be decreasing gradually from vegetation to vegetation course of plant residues and root secretions accumulation. Also, the basic hydro-physical characteristic of root zone will be shifted. Furthermore, saprotrophic microflora will develop and lead to increasing the level of microbial contamination of whole inhabit isolated module. Due to these changes the substrate useful life is limited and store mass is increased in long-term missions. For overhaul-period renewal it' necessary to remove the roots residues and other organic accumulation providing safety of the substrate capillary-porous structure. The basic components of 24-days old plant roots (Brassica chinensis, L) are cellulose (35 %) hemicellulose (11 %) and lignin (10 %). We see that one of the possible ways for roots residues removal from fibrous BIONA is microorganisms applying with strong cellulolytic and ligninolytic activities. The fungi Trichoderma sp., cellulolytic bacteria associations, and some genus of anaerobic thermophilic cellulolitic bacteria have been used for roots residues biodegradation. In case of applying cellulolytic fungi Trichoderma sp. considerable decrease of microcrystalline cellulose has been noted in both liquid and solid state fermentation. Cellulolytic fungi weight has been

ICEMENERG technologies of water treatment applied at Cernavoda NPP Unit 1

International Nuclear Information System (INIS)

Stanca, Angela; Bolma, Aurelia; Serbanescu, Agnes; Raducanu, Alice

2002-01-01

The paper presents the ICEMENERG technologies for water treatment applied at Cernavoda Unit 1, the treatment of the additional water for power steam generators and the chemical treatment of cooling system water. The requirements for quality of water totally demineralized as imposed by the AECL-ANSALDO consortium are as following: electrical conductivity, < 0.2 mS/cm; total silicon, <0.02 mg/L; ionic silicon, <0.01 mg/L; sodium, < 0.05 mg/L; TOC, <0.300 mg/L. These requirements raise rather difficult problems to be solved because the raw water source in case of Cernavoda NPP is Danube River which presents a raising trend of organic and inorganic contamination. Accordingly, experiments at laboratory scale reproducing the entire technological flow were conducted. The following operations were studied: pretreatment with limewash, ferric chloride (with and without coagulation additives); demineralization with ion exchangers of Purolite and Amberlite types. The system consisted of a cationic stage, formed of an strongly acid step with countercurrent recovery and an anionic stage formed of two steps, namely, a weakly basic step and a strongly basic step with recovery inserted; finishing on mixed bed. The paper presents also the chemical treatment/conditioning of the cooling loop of turbine condenser. The Cernavoda NPP cooling system is an open system with a single flow of cooling water comprising two systems, namely, the circulation water system ensuring the steam condenser cooling and the servicing water system ensuring the cooling of heat exchangers in the recirculated water circuit (RCWS), the turbine oil coolants, the coolants of auxiliary steam as well as the emergency core cooling system. Studies were conducted to ensure the chemical conditioning of the raw water from Danube River, particularly, to destroy and remove the shells, the algae and other components. Finally, the following four steps of conditioning the water of the cooling system are summarized: 1

Characterizations of proper actions

Science.gov (United States)

Biller, Harald

2004-03-01

Three kinds of proper actions of increasing strength are defined. We prove that the three definitions specialize to the definitions by Bourbaki, by Palais and by Baum, Connes and Higson in their respective settings. The third of these, which thus turns out to be the strongest, originally only concerns actions of second countable locally compact groups on metrizable spaces. In this situation, it is shown to coincide with the other two definitions if the total space locally has the Lindelöf property and the orbit space is regular.

Asteroid proper elements from an analytical second order theory

International Nuclear Information System (INIS)

Knezevic, Z.; Milani, A.

1989-01-01

The authors have computed by a fully analytical method a new set of proper elements for 3322 numbered main-belt asteroids. They are presented in the following format: asteroid number, proper semimajor axis (AU), proper eccentricity, sine of proper inclination and quality code (see below). This new set is significantly more accurate than all the previous ones at low to moderate eccentricities and inclinations, and especially near the main mean-motion resonances (e.g., the Themis region). This is because the short periodic perturbations are rigorously removed, and the main effects of the second-order (containing the square of the ratio [the mass of Jupiter/mass of the Sun]) are accounted for. Effects arising from the terms in the Hamiltonian of degree up to four in the eccentricity and inclination of both the asteroid and Jupiter are taken into account, and the fundamental frequencies g (for the perihelion) and s(for the node) of the asteroid are computed with a interative algorithm consistent with the basic results of modern dynamics (e.g., Kolmogorov-Arnold-Moser theory)

Applying GRID Technologies to XML Based OLAP Cube Construction

CERN Document Server

Niemi, Tapio Petteri; Nummenmaa, J; Thanisch, P

2002-01-01

On-Line Analytical Processing (OLAP) is a powerful method for analysing large data warehouse data. Typically, the data for an OLAP database is collected from a set of data repositories such as e.g. operational databases. This data set is often huge, and it may not be known in advance what data is required and when to perform the desired data analysis tasks. Sometimes it may happen that some parts of the data are only needed occasionally. Therefore, storing all data to the OLAP database and keeping this database constantly up-to-date is not only a highly demanding task but it also may be overkill in practice. This suggests that in some applications it would be more feasible to form the OLAP cubes only when they are actually needed. However, the OLAP cube construction can be a slow process. Thus, we present a system that applies Grid technologies to distribute the computation. As the data sources may well be heterogeneous, we propose an XML language for data collection. The user's definition for a OLAP new cube...

Decentralized peri-urban wastewater treatment technologies assessment integrating sustainability indicators.

Science.gov (United States)

Mena-Ulecia, Karel; Hernández, Heykel Hernández

2015-01-01

Selection of treatment technologies without considering the environmental, economic and social factors associated with each geographical context risks the occurrence of negative impacts that were not properly foreseen, working against the sustainable performance of the technology. The principal aim of this study was to evaluate 12 technologies for decentralized treatment of domestic wastewater applicable to peri-urban communities using sustainability approaches and, at the same time, continuing a discussion about how to address a more integrated assessment of overall sustainability. For this, a set of 13 indicators that embody the environmental, economic and social approach for the overall sustainability assessment were used by means of a target plot diagram as a tool for integrating indicators that represent a holistic analysis of the technologies. The obtained results put forward different degrees of sustainability, which led to the selection of: septic tank+land infiltration; up-flow anaerobic reactor+high rate trickling filter and septic tank+anaerobic filter as the most sustainable and attractive technologies to be applied in peri-urban communities, according to the employed indicators.

Electronics department progress report. Basic and applied research activity 1975-1977

International Nuclear Information System (INIS)

1978-10-01

The electronics department at Risoe National Laboratory, Denmark, comprises about 80 people and is made up of essentially two main divisions. One deals with the provision of instrumentation and measurement expertise for the different groups at Risoe who conduct basic research or technological R and D. This division employs a group of scientific electronics consultants, a production group, a maintenance facility and a central instrument pool for the complete site. The other division, whose work is reported here, is engaged in both basic and applied research in topics and areas of direct interest to the department itself. These involve the development and evaluation of methods, for example, in the field of plant reliability and safety as well as in a group engaged in nuclear geophysical activities - including mineral prospecting in Greenland. Another team is working with man-machine problems in highly automated systems and the associated needs for computer support in connection with proper job allocation and design. Finally, a group is active in the field of applied laser physics. The time period covered is 1975-1977. (author/BP)

Information and Communication Technology (Ict) Integration Into ...

African Journals Online (AJOL)

As Nigeria aspires for technological growth, positive changes need be made by placing proper educational values ... education is reserved for the less intelligent in the society, amongst others. Need thus arises, to ... with methods and strategies that involves media literacy. ..... students with proper planning, energy, skills.

Applying the Seven Principles of Good Practice: Technology as a Lever--In an Online Research Course

Science.gov (United States)

Johnson, Sherryl

2014-01-01

This article provides an overview of the seven principles of good practice with emphasis on the implementation of technology in an online healthcare research class in a southwest Georgia (United States) university. The seven principles are outlined using various elements of the online course. Historical and philosophical reasoning are applied to…

APPLYING SIMPLE TECHNOLOGY ACCOMPLISHES VISUAL INSPECTION CHALLENGES

International Nuclear Information System (INIS)

Robinson, C

2007-01-01

This paper discusses the successful implementation of simple video technologies at the Savannah River Site (SRS) to perform complex visual inspection, monitoring, and surveillance tasks. Because SRS facilities are similar to those of an industrial plant, the environmental and accessibility considerations for remote viewing are the primary determining factors in the selection of technology. The constraints and challenges associated with remote viewing are discussed, and examples of applications are given

Development of solid oxide fuel cells by applying DC and RF plasma deposition technologies

Energy Technology Data Exchange (ETDEWEB)

Schiller, G.; Henne, R.; Lang, M.; Mueller, M. [Deutsches Zentrum fuer Luft- und Raumfahrt (DLR), Institut fuer Technische Thermodynamik, Postfach 800370, 70503 Stuttgart (Germany)

2004-04-01

Based on advanced plasma deposition technology with both DC and RF plasmas DLR Stuttgart has developed a concept of a planar SOFC with consecutive deposition of all layers of a thin-film cell onto a porous metallic substrate support. This concept is an alternative approach to conventionally used sintering techniques for SOFC fabrication without needing any sintering steps or other thermal post-treatment. Furthermore, is has the potential to be developed into an automated continous production process. For both stationary and mobile applications, adequate stack designs and stack technologies have been developed. Future development work will focus on light-weight stacks to be applied as an Auxillary Power Unit (APU) for on-board electricity supply in passenger cars and airplanes. This paper describes the plasma deposition technologies used for cell fabrication and the DLR spray concept including the resulting stack designs. The current status of development and recent progress with respect to materials development and electrochemical characterization of single cells and short-stacks is presented. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

Dynamical systems of proper characteristic 0

International Nuclear Information System (INIS)

Ahmad, K.H.; Hamoui, A.

1991-07-01

Flows with orbits of proper characteristics 0 exhibit recurrent behaviour, a feature of basic importance in the description of their dynamics. Here, we analyze flows with such orbits relating them with recurrent flows and with flows that exhibit orbital, Poisson or Lagrange stability. (author). 11 refs

Strategy Guideline: Proper Water Heater Selection

Energy Technology Data Exchange (ETDEWEB)

Hoeschele, M. [Alliance for Residential Building Innovation, Davis, CA (United States); Springer, D. [Alliance for Residential Building Innovation, Davis, CA (United States); German, A. [Alliance for Residential Building Innovation, Davis, CA (United States); Staller, J. [Alliance for Residential Building Innovation, Davis, CA (United States); Zhang, Y. [Alliance for Residential Building Innovation, Davis, CA (United States)

2015-04-01

This Strategy Guideline on proper water heater selection was developed by the Building America team Alliance for Residential Building Innovation to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

Strategy Guideline. Proper Water Heater Selection

Energy Technology Data Exchange (ETDEWEB)

Hoeschele, M. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); Springer, D. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); German, A. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); Staller, J. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); Zhang, Y. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States)

2015-04-09

This Strategy Guideline on proper water heater selection was developed by the Building America team Alliance for Residential Building Innovation to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

Regional characteristics of individual housing units in Serbia from the aspect of applied building technologies

Directory of Open Access Journals (Sweden)

Jovanović-Popović Milica

2014-01-01

Full Text Available Individual housing units in Serbia have been studied from the aspect of applied technical solutions. Analyzed data have been collected during a field research in accordance with the current administrative regional division, and they represent a basis for definition of regional typology of individual housing units. Characteristic types of objects of each region’s typology have been further analyzed. Upon these analyses regional characteristics of individual housing units regarding applied construction types, building technologies and materials have been defined and presented. [Projekat Ministarstva nauke Republike Srbije, br. TR 36034: Investigation and Systematization of Serbian Housing in Context of Globalization and European Integration in the Framework of Quality and Living-Standard Improvement

4th International Conference on Applied Computing and Information Technology

CERN Document Server

2017-01-01

This edited book presents scientific results of the 4th International Conference on Applied Computing and Information Technology (ACIT 2016) which was held on December 12–14, 2016 in Las Vegas, USA. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. The aim of this conference was also to bring out the research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them. The conference organizers selected the best papers from those papers accepted for presentation at the conference. The papers were chosen based on review scores submitted by members of the Program Committee, and underwent further rigorous rounds of review. Th...

Investigating differences between proper and common nouns using novel word learning

Directory of Open Access Journals (Sweden)

Anastasiya Romanova

2014-04-01

Full Text Available Empirical studies have shown higher rates of tip-of-the-tongue states for proper nouns, in comparison to common nouns, in non-brain-damaged speakers (e.g., Valentine & Moore, 1995, and higher retrieval failure rates for proper nouns relative to common nouns in people with aphasia (e.g., Semenza, 2009. Some authors suggest the source of these differences lies in logical properties (e.g., Semenza, 2009. That is, common nouns refer to a category of beings or objects that share certain semantic properties, while proper nouns designate specific individual beings or objects with unique features. Other authors attribute the distinction in processing to a number of statistical properties that differ across common and proper nouns (Kay, Hanley, & Miles, 2001. The aims of the present study were: 1 to dissociate the effects of logical and statistical properties by using novel words with equal statistical properties; 2 to determine whether people with aphasia show disproportionate impairments in learning proper nouns relative to common nouns, compared to aged-matched subjects. Methods We tested young (n=16 and elderly (n=14 adult non-brain-damaged participants and people with aphasia (n=2. Items-to-be-learnt were given as representatives of an unknown species (n=10 in the common noun condition, or as individual creatures (n=10 in the proper noun condition. The experiment consisted of 5 sessions. Each session included a learning phase and a test phase with naming and word-picture verification tasks. Results and Discussion Preliminary analysis showed learning of both common and proper nouns for both younger (F(4=140.68, p<.01 and elderly (F(4=34.87, p<.01 non-brain-damaged participants, with learning being significantly better for the younger group (F(4=6.5, p<.01. Contrary to expectations, performance on proper nouns was better than that for common nouns for both young and elderly subjects (F(1=6.47, p=.02 and F(1=9.75, p<.01, respectively, possibly due to

Composting technology in waste stabilization: On the methods, challenges and future prospects.

Science.gov (United States)

Onwosi, Chukwudi O; Igbokwe, Victor C; Odimba, Joyce N; Eke, Ifeanyichukwu E; Nwankwoala, Mary O; Iroh, Ikemdinachi N; Ezeogu, Lewis I

2017-04-01

Composting technology has become invaluable in stabilization of municipal waste due to its environmental compatibility. In this review, different types of composting methods reportedly applied in waste management were explored. Further to that, the major factors such as temperature, pH, C/N ratio, moisture, particle size that have been considered relevant in the monitoring of the composting process were elucidated. Relevant strategies to improve and optimize process effectiveness were also addressed. However, during composting, some challenges such as leachate generation, gas emission and lack of uniformity in assessing maturity indices are imminent. Here in, these challenges were properly addressed and some strategies towards ameliorating them were proffered. Finally, we highlighted some recent technologies that could improve composting. Copyright © 2016 Elsevier Ltd. All rights reserved.

Computation of Asteroid Proper Elements on the Grid

Science.gov (United States)

Novakovic, B.; Balaz, A.; Knezevic, Z.; Potocnik, M.

2009-12-01

A procedure of gridification of the computation of asteroid proper orbital elements is described. The need to speed up the time consuming computations and make them more efficient is justified by the large increase of observational data expected from the next generation all sky surveys. We give the basic notion of proper elements and of the contemporary theories and methods used to compute them for different populations of objects. Proper elements for nearly 70,000 asteroids are derived since the beginning of use of the Grid infrastructure for the purpose. The average time for the catalogs update is significantly shortened with respect to the time needed with stand-alone workstations. We also present basics of the Grid computing, the concepts of Grid middleware and its Workload management system. The practical steps we undertook to efficiently gridify our application are described in full detail. We present the results of a comprehensive testing of the performance of different Grid sites, and offer some practical conclusions based on the benchmark results and on our experience. Finally, we propose some possibilities for the future work.

Proper Names in Dialectal Idioms: Stages of Idiomatization

Directory of Open Access Journals (Sweden)

Ekaterina S. Kogan

2014-06-01

Full Text Available The article deals with the functioning of proper names (both personal and place names and their derivatives in dialectal idioms. Based upon the criteria of the establishing of the idiomatic status of word combinations, traditionally used in contemporary lexicology, the author marks out four stages of the entry of units containing proper names and their derivatives into a regional idiomatic inventory: 1 word combinations with figurative meanings and transparent motivation easily decoded by every member of the local community (e. g., naryaditsa kak Anisya Klimovskaya ‘to be slovenly dressed’; 2 word combinations with a proper name localizing a nationally known idiom (e. g., zhelninsky telyonok ‘screaming person’; 3 word combinations including a name with a general meaning (e. g., Masha s Yashey ‘two inseparable persons’; 4 idioms with non-transparent motivation (e. g., tutursky pop ‘cuckoo male’. The analyzed data are retrieved from dialect dictionaries (including those of idioms and notes made by the Ural Federal University Toponymic Expeditions in Kostroma Region in 2011–2013.

Development of Boundary Condition Independent Reduced Order Thermal Models using Proper Orthogonal Decomposition

Science.gov (United States)

Raghupathy, Arun; Ghia, Karman; Ghia, Urmila

2008-11-01

Compact Thermal Models (CTM) to represent IC packages has been traditionally developed using the DELPHI-based (DEvelopment of Libraries of PHysical models for an Integrated design) methodology. The drawbacks of this method are presented, and an alternative method is proposed. A reduced-order model that provides the complete thermal information accurately with less computational resources can be effectively used in system level simulations. Proper Orthogonal Decomposition (POD), a statistical method, can be used to reduce the order of the degree of freedom or variables of the computations for such a problem. POD along with the Galerkin projection allows us to create reduced-order models that reproduce the characteristics of the system with a considerable reduction in computational resources while maintaining a high level of accuracy. The goal of this work is to show that this method can be applied to obtain a boundary condition independent reduced-order thermal model for complex components. The methodology is applied to the 1D transient heat equation.

Fast algorithms for finding proper strategies in game trees

DEFF Research Database (Denmark)

Miltersen, Peter Bro; Sørensen, Troels Bjerre

2008-01-01

We show how to find a normal form proper equilibrium in behavior strategies of a given two-player zero-sum extensive form game with imperfect information but perfect recall. Our algorithm solves a finite sequence of linear programs and runs in polynomial time. For the case of a perfect information...... game, we show how to find a normal form proper equilibrium in linear time by a simple backwards induction procedure....

Shippingport Atomic Power Station decommissioning program and applied technology

Energy Technology Data Exchange (ETDEWEB)

Crimi, F P; Skavdahl, R E

1985-01-01

The Shippingport Station decommissioning project is the first decommissioning of a large scale nuclear power plant, and also the first nuclear power plant to be decommissioned which has continued the power operation as long as 25 years. The nuclear facilities which have been decommissioned so far have operated for shorter period and were small as compared with commercial power reactors, but the experience gained by those decommissionings as well as that gained by nuclear plant maintenance and modification has helped to establish the technology and cost basis for Shippingport and future decommissioning projects. In this paper, the current status of the preparation being made by the General Electric Co., its subcontractor and the US Department of Energy for starting the decommissioning phase of the Shippingport Atomic Power Station is described. Also remote metal cutting, decontamination, concrete removal, the volume reduction of liquids and solids and robotics which will be applied to the project are discussed. The Shippingport Station is a 72 MWe PWR plant having started operation in 1957, and permanently shut down in 1982, after having generated over 7.4 billion kWh of electricity.

Information Superiority generated through proper application of Geoinformatics

Science.gov (United States)

Teichmann, F.

2012-04-01

Information Superiority generated through proper application of Geoinformatics Information management and especially geoscience information delivery is a very delicate task. If it is carried out successfully, geoscientific data will provide the main foundation of Information Superiority. However, improper implementation of geodata generation, assimilation, distribution or storage will not only waste valuable resources like manpower or money, but could also give rise to crucial deficiency in knowledge and might lead to potentially extremely harmful disasters or wrong decisions. Comprehensive Approach, Effect Based Operations and Network Enabled Capabilities are the current buzz terms in the security regime. However, they also apply to various interdisciplinary tasks like catastrophe relief missions, civil task operations or even in day to day business operations where geo-science data is used. Based on experience in the application of geoscience data for defence applications the following procedure or tool box for generating geodata should lead to the desired information superiority: 1. Understand and analyse the mission, the task and the environment for which the geodata is needed 2. Carry out a Information Exchange Requirement between the user or customer and the geodata provider 3. Implementation of current interoperability standards and a coherent metadata structure 4. Execute innovative data generation, data provision, data assimilation and data storage 5. Apply a cost-effective and reasonable data life cycle 6. Implement IT security by focusing of the three pillar concepts Integrity, Availability and Confidentiality of the critical data 7. Draft and execute a service level agreement or a memorandum of understanding between the involved parties 8. Execute a Continuous Improvement Cycle These ideas from the IT world should be transferred into the geoscience community and applied in a wide set of scenarios. A standardized approach of how to generate, provide

Applying blockchain technology for hyperconnected logistics

NARCIS (Netherlands)

Hofman, W.J.; Spek, J.C.; Brewster, C.

2017-01-01

Blockchain technology receives a lot of interest and investments the last three years. It promises a trusted environment for (un)permissioned data sharing. With respect to logistics, enterprises and authorities can (near) real time share state information. Whenever a stakeholder changes the state of

Technological Criteria Technology-Environmental under a Systemic Approach: Chemistry Technology Transfer

Directory of Open Access Journals (Sweden)

Durán-García Martín Enrique

2014-07-01

Full Text Available Currently the transfer of chemical technology is a process that contributes to the technology policy of a country, an industry or an organization in general chemistry. This process requires the application of clear criteria for the proper development of the complex interrelations in the transfer of chemical technology. A group of criteria that are present, are those related to environmental technology which intrinsically define the technology and its impact to the environment. Therefore, the transfer of chemical technology requires technological-environmental criteria defining, in conjunction with other criteria, an adequate process for the selection, acquisition and incorporation of technology in a holistic perspective, so it provides feasible solutions the chemical industry in pursuit of their goals. Then the criterion becomes a benchmark for assessing an appropriate technology transfer process. We performed a theoretical analysis of the technological and environmental criteria, proposing thirty-six (36 technological-environmental criteria interrelated under a systemic approach in the process of transfer of chemical technology, focused on a methodological cycle first run, based primarily on the research-action method. Future research is expected to make a refinement of the criteria from the formulation and validation of metrics so that necessary adjustments are made to optimize the process of transfer of chemical technology.

Proper motion survey for solar nearby stars

International Nuclear Information System (INIS)

Goldman, Bertrand

2001-01-01

For its microlensing observations EROS 2 built one of the largest CCD mosaic opera ting since 1996. This instrument allowed us to survey a large area of the sky, to look for faint, cool compact objects in the Solar neighborhood that may contribute to the Dark Matter revealed by flat rotation curves of spiral galaxies and the Milky Way. We imaged over 400 square degrees, at least three times over four years, with a single, stable instrument. The aim of this work is the reduction, the analysis and the detection of high proper motion objects that would look like those expected in a dark halo. We selected and analyzed thousands of images taken in two bands, visible and near-infrared, and obtained a catalogue of several thousand stars with proper motion typically higher than 80 milli-arc-seconds per year. None of these candidates displays the expected properties of the halo objects: very high proper motion and faintness. The second part of our work was to put constraints on the contributions of white dwarfs and brown dwarfs ta the halo. To do that, we simulated our data set and estimated our sensitivity to halo objects. We compared our results about moderately high proper motion stars with existing Galactic models, and confirmed the robustness of these models. We deduced a upper limit ta the contribution of M_v = 17.5 white dwarfs to the standard halo of 10% (at the 95% confidence level), or 5% of a 14 Gyr old halo, and to the contribution of brown dwarfs of 7% (95% C.L.). Finally, among our candidates, several interesting objects, that do not belong to the halo but are among the coolest and faintest known, have been discovered. Systematic search for faint, nearby objects thus lead us to study disk L dwarfs, as well as old white dwarfs of the disk. (author) [fr

A method for determining the radius of an open cluster from stellar proper motions

Science.gov (United States)

Sánchez, Néstor; Alfaro, Emilio J.; López-Martínez, Fátima

2018-04-01

We propose a method for calculating the radius of an open cluster in an objective way from an astrometric catalogue containing, at least, positions and proper motions. It uses the minimum spanning tree in the proper motion space to discriminate cluster stars from field stars and it quantifies the strength of the cluster-field separation by means of a statistical parameter defined for the first time in this paper. This is done for a range of different sampling radii from where the cluster radius is obtained as the size at which the best cluster-field separation is achieved. The novelty of this strategy is that the cluster radius is obtained independently of how its stars are spatially distributed. We test the reliability and robustness of the method with both simulated and real data from a well-studied open cluster (NGC 188), and apply it to UCAC4 data for five other open clusters with different catalogued radius values. NGC 188, NGC 1647, NGC 6603, and Ruprecht 155 yielded unambiguous radius values of 15.2 ± 1.8, 29.4 ± 3.4, 4.2 ± 1.7, and 7.0 ± 0.3 arcmin, respectively. ASCC 19 and Collinder 471 showed more than one possible solution, but it is not possible to know whether this is due to the involved uncertainties or due to the presence of complex patterns in their proper motion distributions, something that could be inherent to the physical object or due to the way in which the catalogue was sampled.

Education in Radioactive Waste Management: Issues of science, technology and society

International Nuclear Information System (INIS)

James, E.O.

1993-01-01

Public acceptance of matters relating to radioactive waste management can properly be sought through education, but what are the particulars to be considered and what is the strategy for success? The issues of science, technology and society which must be addressed are explored here and seen to be inextricably related, so that none of them can gain adequate attention except it be presented in the context of the others. Such issues include the concept of acceptable levels of risk, which must become familiar and applied with no greater severity to the nuclear industry than to other aspects of life

Remediation technology needs and applied R ampersand D initiatives

International Nuclear Information System (INIS)

Lien, S.C.T.; Levine, R.S.; Devgun, J.S.; Beskid, N.J.; Erickson, M.D.; Webster, S.L.

1991-01-01

The US Department of Energy (DOE) recently consolidated its environmental restoration and waste management activities. Within that new organization, DOE has committed to support Research, Development, Demonstration, Testing and Evaluation (RDDT ampersand E) activities with the following objectives: rapidly advance beyond currently available restoration and waste management technologies; provide solutions to key technical issues that will improve effectiveness, efficiency, and safety; and enhance DOE's ability to meet its 30-year compliance and cleanup goals. Four general categories have been identified where R ampersand D (and DT ampersand E) efforts need to be focused: waste minimization technologies, site characterization and assessment methods, waste treatment technologies, and remediation technologies with emphasis on in-situ methods. The DOE has already supported a number of R ampersand D activities in these areas and plans to continue that support in the future. For technology development, the DOE is committed to forming cooperative partnerships and eliciting broad participation from qualified organizations who can contribute to RDDT ampersand E activities. The new technologies resulting from these R ampersand D initiatives will enhance DOE's ability to meet its 30-year cleanup goal reduce risk, and provide significant cost savings over existing technologies. Even modest investments in these emerging technologies now can be expected to generate a high rate of return

Remediation technology needs and applied R ampersand D initiatives

International Nuclear Information System (INIS)

Lien, S.C.T.; Levine, R.S.; Webster, S.L.

1991-01-01

The US Department of Energy (DOE) recently consolidated its environmental restoration and waste management activities. Within that new organization, DOE has committed to support Research, Development, Demonstration, Testing and, Evaluation (RDDT ampersand E) activities with the following objectives: rapidly advance beyond currently available technologies; provide solutions to key technical issues that will improve effectiveness, efficiency, and safety; and enhance DOE's ability to meet its 30-year compliance and cleanup goals. Four general categories have been identified where R ampersand D (and DT ampersand E) efforts need to be focused. These include: waste minimization technologies, site characterization and assessment methods, waste treatment technologies, and remediation technologies with emphasis on in-situ methods. The DOE has already supported a number of R ampersand D activities in these areas and plans to continue that support in the future. For technology development, the DOE is committed to forming cooperative partnerships and eliciting broad participation from qualified organizations who can contribute to RDDT ampersand E activities. The new technologies resulting from these R ampersand D initiatives will enhance DOE's ability to meet its 30-year cleanup goal, reduce environmental risk, and provide significant cost savings over existing technologies. Even modest investments in these emerging technologies now can be expected to generate a high rate of return. 3 refs., 2 tabs

[Exploration of Recent Mobile Technologies Applied in Nursing Education].

Science.gov (United States)

Wu, Ting-Ting; Lu, Yi-Chen; Chang, Lei

2017-12-01

The development of science and technology has fundamentally changed people's lives and the way that medical systems function. Increasingly, mobile technologies are being introduced and integrated into classroom teaching and clinical applications, resulting in healthcare providers introducing innovative applications into health education. These applications enhance the clinical, education, and research expertise of medical staffs and nurses, while improving quality of care and providing new experiences for patients. In order to understand the current situation and trends in nursing education, the present study adopted literature analysis to explore the influence and effect of mobile technologies that have been introduced into nursing education from the school and clinical environments. The results found that students hold positive attitudes toward introducing these technologies into their curricula. Although these technologies may increase the work efficiency of nurses in the workplace, questions remain user perceptions and professional expression. Therefore, securing patient agreement and healthcare system approval were major turning points in the introduction of mobile technologies into nursing education. In the future, adapting mobile technologies for use in teaching materials and courses may be further developed. Moreover, empirical studies may be used in future research in order to facilitate the increasingly successful integration of relevant technologies into nursing education.

20 CFR 658.415 - Transferring complaints to proper JS office.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Transferring complaints to proper JS office... Agency Js Complaint System § 658.415 Transferring complaints to proper JS office. (a) Where a JS-related... local office serving the area in which the employer is located. Where a JS-related complaint deals with...

The proper name as starting point for basic reading skills

NARCIS (Netherlands)

Both-De Vries, Anna C.; Bus, Adriana G

Does alphabetic-phonetic writing start with the proper name and how does the name affect reading and writing skills? Sixty 4- to 5(1/2)-year-old children from middle SES families with Dutch as their first language wrote their proper name and named letters. For each child we created unique sets of

Modern technology applied in the advanced BWR (ABWR)

International Nuclear Information System (INIS)

Hucik, S.A.

1988-01-01

The advanced boiling water reactor (ABWR) represents the next generation of light water reactors (LWR) to be introduced into commercial operation in the 1990's. The ABWR is the result of the continuing evolution of the BWR, incorporating state-of-the-art technology and improvements based on worldwide experience, and extensive design and test and development programs. This paper discusses how the ABWR development objective focused on an optimized selection of advanced technologies and proven BWR technologies. A technical evaluation of the ABWR shows its superiority in terms of performance characteristics and economics relative to current LWR designs

Applying Technology To Facilitate Poster Presentations.

Science.gov (United States)

Marek, Pam; Christopher, Andrew N.; Koenig, Cynthia S.

2002-01-01

Promotes the use of presentation software in psychology courses to teach students technological skills that prepare them for the future. Explains that many graduates in psychology are employed in other fields after graduation. Discusses the use of presentation software with a focus on poster preparation using Microsoft PowerPoint software. (CMK)

Information Technology (IT) and applied domain education in West ...

African Journals Online (AJOL)

Information Technology (IT) is one of the important name in today's world. Information Technology (IT) is important factor for buzzword, education, societal application and development, mass communication, politics, hospitality, health. Information Technology (IT) is an interdisciplinary domain which is mainly combination of ...

Computation of asteroid proper elements on the Grid

Directory of Open Access Journals (Sweden)

Novaković B.

2009-01-01

Full Text Available A procedure of gridification of the computation of asteroid proper orbital elements is described. The need to speed up the time consuming computations and make them more efficient is justified by the large increase of observational data expected from the next generation all sky surveys. We give the basic notion of proper elements and of the contemporary theories and methods used to compute them for different populations of objects. Proper elements for nearly 70,000 asteroids are derived since the beginning of use of the Grid infrastructure for the purpose. The average time for the catalogs update is significantly shortened with respect to the time needed with stand-alone workstations. We also present basics of the Grid computing, the concepts of Grid middleware and its Workload management system. The practical steps we undertook to efficiently gridify our application are described in full detail. We present the results of a comprehensive testing of the performance of different Grid sites, and offer some practical conclusions based on the benchmark results and on our experience. Finally, we propose some possibilities for the future work.

Computation of Asteroid Proper Elements on the Grid

Directory of Open Access Journals (Sweden)

Novaković, B.

2009-12-01

Full Text Available A procedure of gridification of the computation of asteroid proper orbital elements is described. The need to speed up the time consuming computations and make them more efficient is justified by the large increase of observational data expected from the next generation all sky surveys. We give the basic notion of proper elements and of the contemporary theories and methods used to compute them for different populations of objects. Proper elements for nearly 70,000 asteroids are derived since the beginning of use of the Grid infrastructure for the purpose. The average time for the catalogs update is significantly shortened with respect to the time needed with stand-alone workstations. We also present basics of the Grid computing, the concepts of Grid middleware and its Workload management system. The practical steps we undertook to efficiently gridify our application are described in full detail. We present the results of a comprehensive testing of the performance of different Grid sites, and offer some practical conclusions based on the benchmark results and on our experience. Finally, we propose some possibilities for the future work.

The disconnect in the appropriation of new technologies into students’ everyday lives. A three country comparison.

Directory of Open Access Journals (Sweden)

André H. Caron

2011-12-01

Full Text Available There is little doubt that students eagerly appropriate new technologies into their lives.  However, the authors wanted to explore what steps would be needed to ensure a proper appropriation of new technologies when applied to academic settings.  This paper presents a 3-country comparison of students reporting on their academic activities and technology use in everyday life. Though the numbers vary slightly within each country, the final results show an overall disconnect between the amount of time students allot to technology use and academic activities. Overall, the findings shed some much needed statistical light on the current reality of students’ technological and academic habits. The authors propose possible next steps to take in order to better understand this phenomenon. Ultimately, this study urges educators and students alike to gather more information about the role social media plays in students’ lives. A better understanding of the situation could eventually lead to the successful integration of new technologies in academia.

Boltzmann babies in the proper time measure

Energy Technology Data Exchange (ETDEWEB)

Bousso, Raphael; Bousso, Raphael; Freivogel, Ben; Yang, I-Sheng

2007-12-20

After commenting briefly on the role of the typicality assumption in science, we advocate a phenomenological approach to the cosmological measure problem. Like any other theory, a measure should be simple, general, well defined, and consistent with observation. This allows us to proceed by elimination. As an example, we consider the proper time cutoff on a geodesic congruence. It predicts that typical observers are quantum fluctuations in the early universe, or Boltzmann babies. We sharpen this well-known youngness problem by taking into account the expansion and open spatial geometry of pocket universes. Moreover, we relate the youngness problem directly to the probability distribution for observables, such as the temperature of the cosmic background radiation. We consider a number of modifications of the proper time measure, but find none that would make it compatible with observation.

The process for technology transfer in Baltimore

Science.gov (United States)

Golden, T. S.

1978-01-01

Ingredients essential for a successful decision process relative to proper technological choices for a large city were determined during four years of experience in the NASA/Baltimore Applications Project. The general approach, rationale, and process of technology transfer are discussed.

Progress report on nuclear science and technology in China (Vol.3). Proceedings of academic annual meeting of China Nuclear Society in 2013, No.9--nuclear technology applied in industry sub-volume

International Nuclear Information System (INIS)

2014-05-01

Progress report on nuclear science and technology in China (Vol. 3) includes 35 articles which are communicated on the third national academic annual meeting of China Nuclear Society. There are 10 books totally. This is the ninth one, the content is about nuclear technology applied in industry sub-volume

Computing more proper covariances of energy dependent nuclear data

International Nuclear Information System (INIS)

Vanhanen, R.

2016-01-01

Highlights: • We present conditions for covariances of energy dependent nuclear data to be proper. • We provide methods to detect non-positive and inconsistent covariances in ENDF-6 format. • We propose methods to find nearby more proper covariances. • The methods can be used as a part of a quality assurance program. - Abstract: We present conditions for covariances of energy dependent nuclear data to be proper in the sense that the covariances are positive, i.e., its eigenvalues are non-negative, and consistent with respect to the sum rules of nuclear data. For the ENDF-6 format covariances we present methods to detect non-positive and inconsistent covariances. These methods would be useful as a part of a quality assurance program. We also propose methods that can be used to find nearby more proper energy dependent covariances. These methods can be used to remove unphysical components, while preserving most of the physical components. We consider several different senses in which the nearness can be measured. These methods could be useful if a re-evaluation of improper covariances is not feasible. Two practical examples are processed and analyzed. These demonstrate some of the properties of the methods. We also demonstrate that the ENDF-6 format covariances of linearly dependent nuclear data should usually be encoded with the derivation rules.

Toward a Technology of Derived Stimulus Relations: An Analysis of Articles Published in the "Journal of Applied Behavior Analysis," 1992-2009

Science.gov (United States)

Rehfeldt, Ruth Anne

2011-01-01

Every article on stimulus equivalence or derived stimulus relations published in the "Journal of Applied Behavior Analysis" was evaluated in terms of characteristics that are relevant to the development of applied technologies: the type of participants, settings, procedure automated vs. tabletop), stimuli, and stimulus sensory modality; types of…

Aeroelastic System Development Using Proper Orthogonal Decomposition and Volterra Theory

Science.gov (United States)

Lucia, David J.; Beran, Philip S.; Silva, Walter A.

2003-01-01

This research combines Volterra theory and proper orthogonal decomposition (POD) into a hybrid methodology for reduced-order modeling of aeroelastic systems. The out-come of the method is a set of linear ordinary differential equations (ODEs) describing the modal amplitudes associated with both the structural modes and the POD basis functions for the uid. For this research, the structural modes are sine waves of varying frequency, and the Volterra-POD approach is applied to the fluid dynamics equations. The structural modes are treated as forcing terms which are impulsed as part of the uid model realization. Using this approach, structural and uid operators are coupled into a single aeroelastic operator. This coupling converts a free boundary uid problem into an initial value problem, while preserving the parameter (or parameters) of interest for sensitivity analysis. The approach is applied to an elastic panel in supersonic cross ow. The hybrid Volterra-POD approach provides a low-order uid model in state-space form. The linear uid model is tightly coupled with a nonlinear panel model using an implicit integration scheme. The resulting aeroelastic model provides correct limit-cycle oscillation prediction over a wide range of panel dynamic pressure values. Time integration of the reduced-order aeroelastic model is four orders of magnitude faster than the high-order solution procedure developed for this research using traditional uid and structural solvers.

Research on fabrication of aspheres at the Center of Optics Technology (University of Applied Science in Aalen); Techical Digest

Science.gov (United States)

Boerret, Rainer; Burger, Jochen; Bich, Andreas; Gall, Christoph; Hellmuth, Thomas

2005-05-01

The Center of Optics Technology at the University of Applied Science, founded in 2003, is part of the School of Optics and Mechatronics. It completes the existing optical engineering department with a full optical fabrication and metrology chain and serves in parallel as a technology transfer center, to provide area industries with the most up-to-date technology in optical fabrication and engineering. Two examples of research work will be presented. The first example is the optimizing of the grinding process for high precision aspheres, the other is generating and polishing of a freeform optical element which is used as a phase plate.

The Requirement of Being a "Fit and Proper" Person for the Legal ...

African Journals Online (AJOL)

An important requirement for admission as an attorney or advocate is to be a "fit and proper" person. Lawyers are also struck from the respective rolls of advocates or attorneys if they cease to be "fit and proper". This requirement of being a "fit and proper" person is not defined or described in legislation. It is left to the ...

Applying Sustainable Systems Development Approach to Educational Technology Systems

Science.gov (United States)

Huang, Albert

2012-01-01

Information technology (IT) is an essential part of modern education. The roles and contributions of technology to education have been thoroughly documented in academic and professional literature. Despite the benefits, the use of educational technology systems (ETS) also creates a significant impact on the environment, primarily due to energy…

Risk Management in Information Technology Project: An Empirical Study

Directory of Open Access Journals (Sweden)

Kornelius Irfandhi

2016-09-01

Full Text Available The companies are facing some risks due to changes in a dynamic environment. If risks are not managed properly, it will have some negative impacts on the companies at the present and the future. One important function of the Information Technology (IT governance is risk management. Risk management in IT project aims to provide a safe environment for IT projects undertaken. Risk management becomes an important process for the success of IT projects. This article discussed the risk of IT project and whether there was a relationship between risk management and the success of the project. The method used was performing a literature review of several scientific articles which published between 2010 and 2014. The results of this study are the presence of risk management and risk manager influence the success of the project. Risk analysis and risk monitoring and control also have a relationship with the subjective performance of IT projects. If risk management is applied properly, the chance of the success of the projects undertaken can be increased. 

Brain slice on a chip: opportunities and challenges of applying microfluidic technology to intact tissues.

Science.gov (United States)

Huang, Yu; Williams, Justin C; Johnson, Stephen M

2012-06-21

Isolated brain tissue, especially brain slices, are valuable experimental tools for studying neuronal function at the network, cellular, synaptic, and single channel levels. Neuroscientists have refined the methods for preserving brain slice viability and function and converged on principles that strongly resemble the approach taken by engineers in developing microfluidic devices. With respect to brain slices, microfluidic technology may 1) overcome the traditional limitations of conventional interface and submerged slice chambers and improve oxygen/nutrient penetration into slices, 2) provide better spatiotemporal control over solution flow/drug delivery to specific slice regions, and 3) permit successful integration with modern optical and electrophysiological techniques. In this review, we highlight the unique advantages of microfluidic devices for in vitro brain slice research, describe recent advances in the integration of microfluidic devices with optical and electrophysiological instrumentation, and discuss clinical applications of microfluidic technology as applied to brain slices and other non-neuronal tissues. We hope that this review will serve as an interdisciplinary guide for both neuroscientists studying brain tissue in vitro and engineers as they further develop microfluidic chamber technology for neuroscience research.

Comparison of Science-Technology-Society Approach and Textbook Oriented Instruction on Students' Abilities to Apply Science Concepts

Science.gov (United States)

Kapici, Hasan Ozgur; Akcay, Hakan; Yager, Robert E.

2017-01-01

It is important for students to learn concepts and using them for solving problems and further learning. Within this respect, the purpose of this study is to investigate students' abilities to apply science concepts that they have learned from Science-Technology-Society based approach or textbook oriented instruction. Current study is based on…

European coal technology applied by the Danish power companies

Energy Technology Data Exchange (ETDEWEB)

Frydenberg, B. [Elsamprojekt A/S, Fredericia (Denmark)

1996-12-31

The development of coal-fired power plants has shown remarkable improvements with regard to efficiency and cleaner technology, and as coal remains the most important fuel for electric power production, it is important to make use of this technological development to reduce CO{sub 2} emissions. Of the three available technologies: Integrated Coal Gasification and Combined Cycle, Fluid Bed Combustion and Pulverised Coal with Ultra Supercritical Steam Data, the technology chosen by I/S ELSAM is the PC-USC with power production efficiencies growing from 45% to 50%. 5 figs., 1 tab.

The Essentials of Proper Wine Service.

Science.gov (United States)

Manago, Gary H.

This instructional unit was designed to assist the food services instructor and/or the restaurant manager in training students and/or staff in the proper procedure for serving wines to guests. The lesson plans included in this unit focus on: (1) the different types of wine glasses and their uses; (2) the parts of a wine glass; (3) the proper…

Local conditions for the Pauli potential in order to yield self-consistent electron densities exhibiting proper atomic shell structure

Energy Technology Data Exchange (ETDEWEB)

Finzel, Kati, E-mail: kati.finzel@liu.se [Linköpings University, IFM Department of Physics, 58183 Linköping (Sweden)

2016-01-21

The local conditions for the Pauli potential that are necessary in order to yield self-consistent electron densities from orbital-free calculations are investigated for approximations that are expressed with the help of a local position variable. It is shown that those local conditions also apply when the Pauli potential is given in terms of the electron density. An explicit formula for the Ne atom is given, preserving the local conditions during the iterative procedure. The resulting orbital-free electron density exhibits proper shell structure behavior and is in close agreement with the Kohn-Sham electron density. This study demonstrates that it is possible to obtain self-consistent orbital-free electron densities with proper atomic shell structure from simple one-point approximations for the Pauli potential at local density level.

Advanced lasers laser physics and technology for applied and fundamental science

CERN Document Server

Sukhoivanov, Igor

2015-01-01

Presenting a blend of applied and fundamental research in highly interdisciplinary subjects of rapidly developing areas, this book contains contributions on the frontiers and hot topics of laser physics, laser technology and laser engineering, and covers a wide range of laser topics, from all-optical signal processing and chaotic optical communication to production of superwicking surfaces, correction of extremely high-power beams, and generation of ultrabroadband spectra. It presents both review-type contributions and well researched and documented case studies, and is intended for graduate students, young scientist, and emeritus scientist working/studying in laser physics, optoelectronics, optics, photonics, and adjacent areas. The book contains both experimental and theoretical studies, as well as combinations of these two, which is known to be a most useful and interesting form of reporting scientific results, allowing students to really learn from each contribution. The book contains over 130 illustratio...

Recommendation of standardized health learning contents using archetypes and semantic web technologies.

Science.gov (United States)

Legaz-García, María del Carmen; Martínez-Costa, Catalina; Menárguez-Tortosa, Marcos; Fernández-Breis, Jesualdo Tomás

2012-01-01

Linking Electronic Healthcare Records (EHR) content to educational materials has been considered a key international recommendation to enable clinical engagement and to promote patient safety. This would suggest citizens to access reliable information available on the web and to guide them properly. In this paper, we describe an approach in that direction, based on the use of dual model EHR standards and standardized educational contents. The recommendation method will be based on the semantic coverage of the learning content repository for a particular archetype, which will be calculated by applying semantic web technologies like ontologies and semantic annotations.

Combined time-varying forecast based on the proper scoring approach for wind power generation

DEFF Research Database (Denmark)

Chen, Xingying; Jiang, Yu; Yu, Kun

2017-01-01

Compared with traditional point forecasts, combined forecast have been proposed as an effective method to provide more accurate forecasts than individual model. However, the literature and research focus on wind-power combined forecasts are relatively limited. Here, based on forecasting error...... distribution, a proper scoring approach is applied to combine plausible models to form an overall time-varying model for the next day forecasts, rather than weights-based combination. To validate the effectiveness of the proposed method, real data of 3 years were used for testing. Simulation results...... demonstrate that the proposed method improves the accuracy of overall forecasts, even compared with a numerical weather prediction....

Applying object technology principles to business reengineering in the oil, gas, and petrochemical industries

International Nuclear Information System (INIS)

Davis, J.M.

1996-01-01

The oil, gas, and petrochemical industries face a dilemma, to be financially competitive while complying with strict and expanding environmental, safety, and health regulation. Companies need new tools and techniques, indeed a completely new paradigm for organizing and performing work. They must build efficient and flexible business processes, ones that rely on advanced information systems for improved decision making and productivity. And they must adopt a culture of change and improvement to permit the business to change as the business climate changes. Fortunately, two industry developments are changing the traditional business paradigm in a dramatic way; business reengineering and object technology. Applying principles of object technology in the performance of business reengineering makes available a new form of business modeling that transforms the technique of modeling a business while directly supported the development of its enabling information systems. This modeling technique is called Object Modeling and is becoming an important force in improving business competitiveness

Study on proper applying TQM in classroom teaching

Institute of Scientific and Technical Information of China (English)

KONG Yan

2009-01-01

@@ 1 Introduction-What is Total Quality Management (TQM)? There are many definitions of Total Quality Management(TQM)around.Some define TQM in a way different to some others.But in general definition of TQM should contain the following characteristics:

THE PROPER MOTION OF PALOMAR 5

Energy Technology Data Exchange (ETDEWEB)

Fritz, T. K.; Kallivayalil, N., E-mail: tkf4w@astro.virginia.edu [Department of Astronomy, University of Virginia, Charlottesville, 3530 McCormick Road, VA 22904-4325 (United States)

2015-10-01

Palomar 5 (Pal 5) is a faint halo globular cluster associated with narrow tidal tails. It is a useful system to understand the process of tidal dissolution, as well as to constrain the potential of the Milky Way. A well-determined orbit for Pal 5 would enable detailed study of these open questions. We present here the first CCD-based proper motion measurement of Pal 5 obtained using SDSS as a first epoch and new Large Binocular Telescope/Large Binocular Camera (LBC) images as a second, giving a baseline of 15 years. We perform relative astrometry, using SDSS as a distortion-free reference, and images of the cluster and also of the Pal 5 stream for the derivation of the distortion correction for LBC. The reference frame is made up of background galaxies. We correct for differential chromatic refraction using relations obtained from SDSS colors as well as from flux-calibrated spectra, finding that the correction relations for stars and for galaxies are different. We obtain μ{sub α} = −2.296 ± 0.186 mas yr{sup −1} and μ{sub δ} = −2.257 ± 0.181 mas yr{sup −1} for the proper motion of Pal 5. We use this motion, and the publicly available code galpy, to model the disruption of Pal 5 in different Milky Way models consisting of a bulge, a disk, and a spherical dark matter halo. Our fits to the observed stream properties (streak and radial velocity gradient) result in a preference for a relatively large Pal 5 distance of around 24 kpc. A slightly larger absolute proper motion than what we measure also results in better matches but the best solutions need a change in distance. We find that a spherical Milky Way model, with V{sub 0} = 220 km s{sup −1} and V{sub 20} {sub kpc}, i.e., approximately at the apocenter of Pal 5, of 218 km s{sup −1}, can match the data well, at least for our choice of disk and bulge parametrization.

Proper alignment of the microscope.

Science.gov (United States)

Rottenfusser, Rudi

2013-01-01

The light microscope is merely the first element of an imaging system in a research facility. Such a system may include high-speed and/or high-resolution image acquisition capabilities, confocal technologies, and super-resolution methods of various types. Yet more than ever, the proverb "garbage in-garbage out" remains a fact. Image manipulations may be used to conceal a suboptimal microscope setup, but an artifact-free image can only be obtained when the microscope is optimally aligned, both mechanically and optically. Something else is often overlooked in the quest to get the best image out of the microscope: Proper sample preparation! The microscope optics can only do its job when its design criteria are matched to the specimen or vice versa. The specimen itself, the mounting medium, the cover slip, and the type of immersion medium (if applicable) are all part of the total optical makeup. To get the best results out of a microscope, understanding the functions of all of its variable components is important. Only then one knows how to optimize these components for the intended application. Different approaches might be chosen to discuss all of the microscope's components. We decided to follow the light path which starts with the light source and ends at the camera or the eyepieces. To add more transparency to this sequence, the section up to the microscope stage was called the "Illuminating Section", to be followed by the "Imaging Section" which starts with the microscope objective. After understanding the various components, we can start "working with the microscope." To get the best resolution and contrast from the microscope, the practice of "Koehler Illumination" should be understood and followed by every serious microscopist. Step-by-step instructions as well as illustrations of the beam path in an upright and inverted microscope are included in this chapter. A few practical considerations are listed in Section 3. Copyright © 2013 Elsevier Inc. All rights

The use of information technologies and communication assistive technology as applied in the construction of knowledge of students with visual disabilities who attend rooms multifunction resources

Directory of Open Access Journals (Sweden)

Raquel Rosan Christino Gitahy

2016-04-01

Full Text Available This research aimed to investigate the contribution brought by the use of information and communication technologies applied to assistive technology in the construction of knowledge of students with visual impairment who attended the multifunction capabilities room. Research subjects were two students with visual impairment in different school years attending the multifunctional room features two educational institutions. In addition to students, the research subjects were also the teachers of the respective multi-functional resources they attend and the teachers who attended the in mainstream education. To achieve the goal, initially, the theoretical framework and was later carried out the field study procedure through the interview collection was consulted. The results found that two educational institutions surveyed are still building their pedagogical regarding the use and appropriation of ICT when used in multifunctional resource room as assistive technology. It is of fundamental importance to teacher training for the appropriation of ICT especially in relation to work with assistive technology in educational environments. Therefore, that it develops skills and abilities that allow building pedagogical practices in congruence with these technologies.

Applying science and technology to combat WMD terrorism

Science.gov (United States)

Wuest, Craig R.; Werne, Roger W.; Colston, Billy W.; Hartmann-Siantar, Christine L.

2006-05-01

Lawrence Livermore National Laboratory (LLNL) is developing and fielding advanced strategies that dramatically improve the nation's capabilities to prevent, prepare for, detect, and respond to terrorist use of chemical, biological, radiological, nuclear, and explosive (CBRNE) weapons. The science, technology, and integrated systems we provide are informed by and developed with key partners and end users. LLNL's long-standing role as one of the two principle U.S. nuclear weapons design laboratories has led to significant resident expertise for health effects of exposure to radiation, radiation detection technologies, characterization of radioisotopes, and assessment and response capabilities for terrorist nuclear weapons use. This paper provides brief overviews of a number of technologies developed at LLNL that are being used to address national security needs to confront the growing threats of CBRNE terrorism.

Applying Science and Technology to Combat WMD Terrorism

International Nuclear Information System (INIS)

Wuest, C R; Werne, R W; Colston, B W; Hartmann-Siantar, C L

2006-01-01

Lawrence Livermore National Laboratory (LLNL) is developing and fielding advanced strategies that dramatically improve the nation's capabilities to prevent, prepare for, detect, and respond to terrorist use of chemical, biological, radiological, nuclear, and explosive (CBRNE) weapons. The science, technology, and integrated systems we provide are informed by and developed with key partners and end users. LLNL's long-standing role as one of the two principle U.S. nuclear weapons design laboratories has led to significant resident expertise for health effects of exposure to radiation, radiation detection technologies, characterization of radioisotopes, and assessment and response capabilities for terrorist nuclear weapons use. This paper provides brief overviews of a number of technologies developed at LLNL that are being used to address national security needs to confront the growing threats of CBRNE terrorism

Broad-scale recombination patterns underlying proper disjunction in humans.

Directory of Open Access Journals (Sweden)

Adi Fledel-Alon

2009-09-01

Full Text Available Although recombination is essential to the successful completion of human meiosis, it remains unclear how tightly the process is regulated and over what scale. To assess the nature and stringency of constraints on human recombination, we examined crossover patterns in transmissions to viable, non-trisomic offspring, using dense genotyping data collected in a large set of pedigrees. Our analysis supports a requirement for one chiasma per chromosome rather than per arm to ensure proper disjunction, with additional chiasmata occurring in proportion to physical length. The requirement is not absolute, however, as chromosome 21 seems to be frequently transmitted properly in the absence of a chiasma in females, a finding that raises the possibility of a back-up mechanism aiding in its correct segregation. We also found a set of double crossovers in surprisingly close proximity, as expected from a second pathway that is not subject to crossover interference. These findings point to multiple mechanisms that shape the distribution of crossovers, influencing proper disjunction in humans.

Applying Technology to Marine Corps Distance Learning

National Research Council Canada - National Science Library

Broihier, Michael

1997-01-01

The purpose of this thesis is to investigate the application of technology to distance learning with the intention of recommending to the Marine Corps a feasible migration path away from its current...

Study on laser beam welding technology for nuclear power plants

International Nuclear Information System (INIS)

Chida, Itaru; Shiihara, Katsunori; Fukuda, Takeshi; Kono, Wataru; Obata, Minoru; Morishima, Yasuo

2012-01-01

Laser beam welding is one of the jointing processes by irradiating laser beam on the material surface locally and widely used at various industrial fields. Toshiba has developed various laser-based maintenance and repair technologies and already applied them to several existing nuclear power plants. Laser cladding is a technique to weld the corrosion resistant metal onto a substrate surface by feeding filler wire to improve the corrosion resistance. Temper-bead welding is the heat input process to provide the desired microstructure properties of welded low alloy steels without post weld heat treatment, by inducing proper heat cycle during laser welding. Both laser welding technologies would be performed underwater by blowing the shielding gas for creating the local dry area. In this report, some evaluation results of material characteristics by temper-bead welding to target at Reactor Coolant System nozzle of PWR are presented. (author)

Human Capital Efficiency and Firm Performance: An Empirical Study on Malaysian Technology Industry

Directory of Open Access Journals (Sweden)

Rahim Azlina

2017-01-01

Full Text Available This study examined the relationship between human capital efficiency and firm’s performance in Malaysian technology industry. Using accounting data, this study reviewed annual reports of all technology companies listed under Main Market and Ace Market of Bursa Malaysia in year 2009. The study applied Value Added Intellectual Coefficient (VAICTM methodology developed by Ante Pulic to measure human capital efficiency. The results showed that there was not much difference in terms of human capital efficiency between the Main Market and Ace Market. Results from correlation analysis indicate that human capital efficiency has significant and positive relation with firm’s performance. Findings from this study may be useful to companies’ managers to make better decision pertaining to the proper deployment of their strategic asset, namely human capital.

Advancement in Engineering Technology

DEFF Research Database (Denmark)

Kalia, Kartik; Rehman, M. Atiqur; Hussain, Dil muhammed Akbar

2016-01-01

In this paper we will be discussing about the impact of technology on our daily lives. How everybody is dependent upon technology in one or other way. Methods/Statistical Analysis: Technology has played a significant role in the evolution of the society. Science has produced many new ideas...... but to harvest those ideas, technology is a must. With the huge requirement of engineering equipment's, the industry needs specialists who can manage and operate these technologies. Detailed information about the merits and demerits of technology is also mentioned in this paper. Findings: Technology has affected...... the environment on a great scale; in some cases, technology is even replacing human being or use of manpower. So proper counter measures have been mentioned, which can be used to control and limit harmful effect....

Strategic Health Technology Incorporation

CERN Document Server

Wang, Binseng

2009-01-01

Technology is essential to the delivery of health care but it is still only a tool that needs to be deployed wisely to ensure beneficial outcomes at reasonable costs. Among various categories of health technology, medical equipment has the unique distinction of requiring both high initial investments and costly maintenance during its entire useful life. This characteristic does not, however, imply that medical equipment is more costly than other categories, provided that it is managed properly. The foundation of a sound technology management process is the planning and acquisition of equipment

Applying Digital Technologies to Strengthen Nuclear Safety

International Nuclear Information System (INIS)

Huffeteau, S.; Roy, C.

2016-01-01

Full text: The paper describes how the development of some information technologies can further contribute to the safety of nuclear facilities and their competitiveness. After repositioning the nuclear industry engineering practices in their historical and economic context, the paper describes five engineering practices or use cases widely developed especially in the aerospace industry: requirement management, business process enforcement by digitization of data and processes, facilities configuration management, engineering information unification, and digital licensing. Information technology (IT) plays a mandatory role for driving this change since IT is now mature enough to handle the level of complexity the nuclear industry requires. While the detailed evaluation of the expecting gains in cost decrease or safety increase can be difficult to quantify, the paper presents illustrative benefits reachable by a development of these practices. (author

Measuring relative efficiency of applied science and technology universities in province of Semnan, Iran and providing suggestions for merging units

Directory of Open Access Journals (Sweden)

Abolfazl Danaei

2013-03-01

Full Text Available University of applied science and technology has been designed to create a platform for multilateral activities such as industrial, military and academic in developing countries to promote science and scientific research applications. These universities are responsible to promote practical training in quantitative and qualitative indicators and they provide appropriate infrastructure to implement theoretical graduates to solve practical problems to build necessary infrastructure to transfer modern technology into developing countries. During the past few years, there have been tremendous development on these units but some of them have not been efficient. In this paper, we present an empirical study to measure the relative efficiencies of various units of applied science and technology universities using data envelopment analysis. The proposed model of this paper uses two inputs including human resources as well as total assets and two outputs including the number of graduate students as well as operating profit. The results of the study have indicated that some of the units are inefficient and need to be merged with other units to increase the relative efficiency of these universities.

Computing Proper Equilibria of Zero-Sum Games

DEFF Research Database (Denmark)

Miltersen, Peter Bro; Sørensen, Troels Bjerre

2007-01-01

We show that a proper equilibrium of a matrix game can be found in polynomial time by solving a linear (in the number of pure strategies of the two players) number of linear programs of roughly the same dimensions as the standard linear programs describing the Nash equilibria of the game....

45 CFR 170.423 - Principles of proper conduct for ONC-ATCBs.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Principles of proper conduct for ONC-ATCBs. 170... § 170.423 Principles of proper conduct for ONC-ATCBs. An ONC-ATCB shall: (a) Operate its certification... EHR Module developer conspicuously include the following text on its Web site and in all marketing...

25 CFR 87.12 - Insuring the proper performance of approved plans.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Insuring the proper performance of approved plans. 87.12... DISTRIBUTION OF INDIAN JUDGMENT FUNDS § 87.12 Insuring the proper performance of approved plans. A timetable... regarding the maintenance of the timetable, a full accounting of any per capita distribution, and the...

32 CFR 725.7 - Contents of a proper request or demand.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Contents of a proper request or demand. 725.7 Section 725.7 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY PERSONNEL RELEASE... § 725.7 Contents of a proper request or demand. (a) Routine requests. If official information is sought...

Dimension invariants for groups admitting a cocompact model for proper actions

DEFF Research Database (Denmark)

Degrijse, Dieter Dries; Martínez-Pérez, Conchita

2016-01-01

Let G be a group that admits a cocompact classifying space for proper actions X. We derive a formula for the Bredon cohomological dimension for proper actions of G in terms of the relative cohomology with compact support of certain pairs of subcomplexes of X. We use this formula to compute the Br...

Leveraging Old Intellectual Property to Accelerate Technology Entrepreneurship

Directory of Open Access Journals (Sweden)

Derek Smith

2013-06-01

Full Text Available Acquiring or licensing assets to older technologies, including surviving intellectual property rights, is an often-overlooked viable strategy for accelerating technology entrepreneurship. This strategy can help entrepreneurs short-cut the growth of a customer base, reduce development effort, and shorten the time to market with a minimum viable product. However, this strategy is not without risk; entrepreneurs need to be careful that the acquired intellectual property rights are not fraught with issues that could severely outweigh any perceived value. Proper investigation is required to ensure success because the current literature fails to provide tools that an entrepreneur can apply when considering the acquisition of intellectual property. This article includes a case study of a technology company – Piranha Games – that indirectly acquired sole and exclusive access to a substantial historical customer base by acquiring and licensing older technology and surviving intellectual property assets. The founders then leveraged the existing product brand and its historical customers to acquire significant funding and went global with a minimum viable product in three years. The copyright and trademark assets provided value on day one to Piranha Games by making it difficult and risky for others to exploit the technology. Based on this case study, this article offers recommendations to entrepreneurs who may benefit from acquiring old intellectual property to accelerate the growth of their startups.

Proper utilization of solar energy in Bangladesh: effect on the environment, food supply and the standard of living

International Nuclear Information System (INIS)

Islam, S.; Huda, A.-U.

1999-01-01

The only really sustainable form of energy is solar energy. The densely populated tropical countries can do very well from this completely sustainable energy source without any novel technologies. Most of the commercial energy used worldwide is supplied by using non-renewable resources. Environmental damage - global warming, ozone hole, noise, chemical and radioactive waste - is due to high energy use. Environmental deterioration is a direct consequence of wealth generated and sustained by extremely cheap fossil fuel. The price of fossil fuel does not include the cost for the deterioration of the environment. We show in this paper that even a densely populated country like Bangladesh can attain a high standard of living by a proper utilization of solar energy. We suggest that poor tropical countries should mobilize their resources to develop solar technology. (author)

Proper utilization of solar energy in Bangladesh: effect on the environment, food supply and the standard of living

Energy Technology Data Exchange (ETDEWEB)

Islam, S.; Huda, A.-U. [University of Dhaka (Bangladesh). Physics Dept.

1999-06-01

The only really sustainable form of energy is solar energy. The densely populated tropical countries can do very well from this completely sustainable energy source without any novel technologies. Most of the commercial energy used worldwide is supplied by using non-renewable resources. Environmental damage - global warming, ozone hole, noise, chemical and radioactive waste - is due to high energy use. Environmental deterioration is a direct consequence of wealth generated and sustained by extremely cheap fossil fuel. The price of fossil fuel does not include the cost for the deterioration of the environment. We show in this paper that even a densely populated country like Bangladesh can attain a high standard of living by a proper utilization of solar energy. We suggest that poor tropical countries should mobilize their resources to develop solar technology. (author)

Recent progress of welding technology applied for nuclear components

International Nuclear Information System (INIS)

Kobayashi, T.; Hoshino, T.; Koide, H.; Yamamoto, T.; Takahashi, T.; Hashimoto, T.

2005-01-01

More than 30 years have been passed since the first nuclear power plant was in operation. Various needs for welding technology have been emerged and the technology has been developed. This paper first describes the key technologies in BWR power plants and then introduces ones in PWR power plants. Welding techniques are introduced in detail. Applications of arc welding, gas tungsten arc welding, electroslag welding, electron beam welding are explained. In order to avoid stress corrosion cracking, water jet and laser peening techniques are used. (author)

PropeR: a multi disciplinary EPR system

NARCIS (Netherlands)

van der Linden, Helma; Boers, Gerrit; Tange, Huibert; Talmon, Jan; Hasman, Arie

2003-01-01

This article describes the architecture of an EPR system developed for the PropeR project. This EPR system not only aims at supporting home care of stroke patients, but is also designed in such a way that it can be ported to other medical services without much effort. We will briefly describe the

Improving overlay control through proper use of multilevel query APC

Science.gov (United States)

Conway, Timothy H.; Carlson, Alan; Crow, David A.

2003-06-01

Many state-of-the-art fabs are operating with increasingly diversified product mixes. For example, at Cypress Semiconductor, it is not unusual to be concurrently running multiple technologies and many devices within each technology. This diverse product mix significantly increases the difficulty of manually controlling overlay process corrections. As a result, automated run-to-run feedforward-feedback control has become a necessary and vital component of manufacturing. However, traditional run-to-run controllers rely on highly correlated historical events to forecast process corrections. For example, the historical process events typically are constrained to match the current event for exposure tool, device, process level and reticle ID. This narrowly defined process stream can result in insufficient data when applied to lowvolume or new-release devices. The run-to-run controller implemented at Cypress utilizes a multi-level query (Level-N) correlation algorithm, where each subsequent level widens the search criteria for available historical data. The paper discusses how best to widen the search criteria and how to determine and apply a known bias to account for tool-to-tool and device-to-device differences. Specific applications include offloading lots from one tool to another when the first tool is down for preventive maintenance, utilizing related devices to determine a default feedback vector for new-release devices, and applying bias values to account for known reticle-to-reticle differences. In this study, we will show how historical data can be leveraged from related devices or tools to overcome the limitations of narrow process streams. In particular, this paper discusses how effectively handling narrow process streams allows Cypress to offload lots from a baseline tool to an alternate tool.

Impact of Training on Improving Proper Handwashing Practices among Elementary School Students

Directory of Open Access Journals (Sweden)

Theruna Huthamaputiran

2017-06-01

Full Text Available Background: Hand washing is among the most effective ways to prevent diseases. In Indonesia, only a quarter of the entire population practice proper handwashing techniques. Of these, children are the most vulnerable group for contracting diseases. Nevertheless, they also are crucial agent for behavior transformation as they are keen and open to new ideas. Therefore, this study was conducted to determine if training would have an improvement on a proper hand washing practices among elementary school students. Methods:An observational descriptive study design using random sampling was conducted from September to November 2013 in Jatinangor Subdistrict, West Java, Indonesia using primary data of one hundred elementary school students from four elementary schools. Questionnaires were given after informed consent. A demonstration on hand washing techniques and education on proper hand washing practices was then given. Two weeks later, the same questionnaire was given to measure the influence of the training. The collected data were presented using frequency tabulation. Results: Before the training on proper hand washing practices was conducted, only 86.9% students were practicing it properly. After the training was given, 90.7% of the students were doing it properly. For the hand washing technique, only 66.8% of students knew the correct steps before the intervention was given and 78.7% students did them correctly after the intervention. Conclusions:The training shows an overall improvement on the students’ hand washing practices.   DOI: 10.15850/amj.v4n2.1073

Travelling wave solutions and proper solutions to the two-dimensional Burgers-Korteweg-de Vries equation

International Nuclear Information System (INIS)

Feng Zhaosheng

2003-01-01

In this paper, we study the two-dimensional Burgers-Korteweg-de Vries (2D-BKdV) equation by analysing an equivalent two-dimensional autonomous system, which indicates that under some particular conditions, the 2D-BKdV equation has a unique bounded travelling wave solution. Then by using a direct method, a travelling solitary wave solution to the 2D-BKdV equation is expressed explicitly, which appears to be more efficient than the existing methods proposed in the literature. At the end of the paper, the asymptotic behaviour of the proper solutions of the 2D-BKdV equation is established by applying the qualitative theory of differential equations

Assigned value improves memory of proper names.

Science.gov (United States)

Festini, Sara B; Hartley, Alan A; Tauber, Sarah K; Rhodes, Matthew G

2013-01-01

Names are more difficult to remember than other personal information such as occupations. The current research examined the influence of assigned point value on memory and metamemory judgements for names and occupations to determine whether incentive can improve recall of proper names. In Experiment 1 participants studied face-name and face-occupation pairs assigned 1 or 10 points, made judgements of learning, and were given a cued recall test. High-value names were recalled more often than low-value names. However, recall of occupations was not influenced by value. In Experiment 2 meaningless nonwords were used for both names and occupations. The name difficulty disappeared, and value influenced recall of both names and occupations. Thus value similarly influenced names and occupations when meaningfulness was held constant. In Experiment 3 participants were required to use overt rote rehearsal for all items. Value did not boost recall of high-value names, suggesting that differential processing could not be implemented to improve memory. Thus incentives may improve memory for proper names by motivating people to engage in selective rehearsal and effortful elaborative processing.

Entropy Generation Analysis of Desalination Technologies

Directory of Open Access Journals (Sweden)

John H. Lienhard V

2011-09-01

Full Text Available Increasing global demand for fresh water is driving the development and implementation of a wide variety of seawater desalination technologies. Entropy generation analysis, and specifically, Second Law efficiency, is an important tool for illustrating the influence of irreversibilities within a system on the required energy input. When defining Second Law efficiency, the useful exergy output of the system must be properly defined. For desalination systems, this is the minimum least work of separation required to extract a unit of water from a feed stream of a given salinity. In order to evaluate the Second Law efficiency, entropy generation mechanisms present in a wide range of desalination processes are analyzed. In particular, entropy generated in the run down to equilibrium of discharge streams must be considered. Physical models are applied to estimate the magnitude of entropy generation by component and individual processes. These formulations are applied to calculate the total entropy generation in several desalination systems including multiple effect distillation, multistage flash, membrane distillation, mechanical vapor compression, reverse osmosis, and humidification-dehumidification. Within each technology, the relative importance of each source of entropy generation is discussed in order to determine which should be the target of entropy generation minimization. As given here, the correct application of Second Law efficiency shows which systems operate closest to the reversible limit and helps to indicate which systems have the greatest potential for improvement.

Study on laser beam welding technology for nuclear power plants title

International Nuclear Information System (INIS)

Chida, Itaru; Shiihara, Katsunori; Fukuda, Takeshi; Kono, Wataru; Obata, Minoru; Morishima, Yasuo

2011-01-01

Laser beam welding is one of the jointing processes by irradiating laser beam on the material surface locally and widely used at various industrial fields. Toshiba has developed various laser-based maintenance and repair technologies and already applied them to several existing nuclear power plants. Laser cladding is a technique to weld the corrosion resistant metal onto a substrate surface by feeding filler wire to improve the corrosion resistance. Temper-bead welding is the heat input process to provide the desired microstructure properties of welded low alloy steels without post weld heat treatment, by inducing proper heat cycle during laser welding. Both laser welding technologies would be performed underwater by blowing the shielding gas for creating the local dry area. In this report, some evaluation results of material characteristics by temper-bead welding to target at Reactor Coolant System nozzle of PWR are presented. (author)

Hurdle technology applied to prickly pear beverages for inhibiting Saccharomyces cerevisiae and Escherichia coli.

Science.gov (United States)

García-García, R; Escobedo-Avellaneda, Z; Tejada-Ortigoza, V; Martín-Belloso, O; Valdez-Fragoso, A; Welti-Chanes, J

2015-06-01

The effect of pH reduction (from 6·30-6·45 to 4·22-4·46) and the addition of antimicrobial compounds (sodium benzoate and potassium sorbate) on the inhibition of Saccharomyces cerevisiae and Escherichia coli in prickly pear beverages formulated with the pulp and peel of Villanueva (V, Opuntia albicarpa) and Rojo Vigor (RV, Opuntia ficus-indica) varieties during 14 days of storage at 25°C, was evaluated. RV variety presented the highest microbial inhibition. By combining pH reduction and preservatives, reductions of 6·2-log10 and 2·3-log10 for E. coli and S. cerevisiae were achieved respectively. Due to the low reduction of S. cerevisiae, pulsed electric fields (PEF) (11-15 μs/25-50 Hz/27-36 kV cm(-1)) was applied as another preservation factor. The combination of preservatives, pH reduction and PEF at 13-15 μs/25-50 Hz for V variety, and 11 μs/50 Hz, 13-15 μs/25-50 Hz for RV, had a synergistic effect on S. cerevisiae inhibition, achieving at least 3·4-log10 of microbial reduction immediately after processing, and more than 5-log10 at fourth day of storage at 25°C maintained this reduction during 21 days of storage (P > 0·05). Hurdle technology using PEF in combination with other factors is adequate to maintain stable prickly pear beverages during 21 days/25°C. Significance and impact of the study: Prickly pear is a fruit with functional value, with high content of nutraceuticals and antioxidant activity. Functional beverages formulated with the pulp and peel of this fruit represent an alternative for its consumption. Escherichia coli and Saccharomyces cerevisiae are micro-organisms that typically affect fruit beverage quality and safety. The food industry is looking for processing technologies that maintain quality without compromising safety. Hurdle technology, including pulsed electric fields (PEF) could be an option to achieve this. The combination of PEF, pH reduction and preservatives is an alternative to obtain safe and minimally processed

User perceptions regarding sanitation technologies in South Africa

CSIR Research Space (South Africa)

Duncker, Louiza C

2014-09-01

Full Text Available , misuse/non-use and lack of proper maintenance, therefore placing the sustainability of these sanitation systems in question. Even if the technology was designed and built well, the use of the technology and its acceptance by the user proved to be the most...

Digital security technology simplified.

Science.gov (United States)

Scaglione, Bernard J

2007-01-01

Digital security technology is making great strides in replacing analog and other traditional security systems including CCTV card access, personal identification and alarm monitoring applications. Like any new technology, the author says, it is important to understand its benefits and limitations before purchasing and installing, to ensure its proper operation and effectiveness. This article is a primer for security directors on how digital technology works. It provides an understanding of the key components which make up the foundation for digital security systems, focusing on three key aspects of the digital security world: the security network, IP cameras and IP recorders.

New technologies applied to family history: a particular case of southern Europe in the eighteenth century.

Science.gov (United States)

García, Manuel Pérez

2011-01-01

In this article, the author explains how the support of new technologies has helped historians to develop their research over the last few decades. The author, therefore, summarizes the application of both database and genealogical programs for the southern Europe family studies as a methodological tool. First, the author will establish the importance of the creation of databases using the File Maker program, after which they will explain the value of using genealogical programs such as Genopro and Heredis. The main aim of this article is to give detail about the use of these new technologies as applied to a particular study of southern Europe, specifically the Crown of Castile, during the late modern period. The use of these computer programs has helped to develop the field of social sciences and family history, in particular, social history, during the last decade.

Improving the validity of quantitative measures in applied linguistics research

NARCIS (Netherlands)

Purpura, J.E.; Brown, J.D.; Schoonen, R.

2015-01-01

In empirical applied linguistics research it is essential that the key variables are operationalized in a valid and reliable way, and that the scores are treated appropriately, allowing for a proper testing of the hypotheses under investigation. The current article addresses several theoretical and

Implementing Technology and Gaming Lessons in a School Library

Science.gov (United States)

Mashriqi, Khalida

2011-01-01

School librarians play numerous roles throughout a day. They are information specialists who keep up with the constant changes in information and technology. It is important for them to keep students up-to-date and teach them to use technology properly. Gaming and technology are both important concepts for 21st-century school librarians to…

The approach to detection and application of the company’s technological competences to form a business-model

Science.gov (United States)

Chursin, A. A.; Kashirin, A. I.; Strenalyuk, V. V.; Semenov, A. S.; Ostrovskaya, A. A.; Kokuytseva, T. V.

2018-02-01

The most important condition for increasing the competitiveness of business is the formation, retention, and development of key competences of the organization, which reflect the competitive advantage. This problem is especially urgent for high-tech industries, which are the most sensitive to all kinds of changes and innovations. The ways of applying the company’s technological competences to form a business model, the proper form of competence description and analysis on the example of the company “Teplolux” are considered. The following from is recommended to use in IT solutions for competence databases.

On proper Shapley values for monotone TU-games

NARCIS (Netherlands)

van den Brink, J.R.; Levinsky, R.; Zeleny, M.

2015-01-01

The Shapley value of a cooperative transferable utility game distributes the dividend of each coalition in the game equally among its members. Given exogenous weights for all players, the corresponding weighted Shapley value distributes the dividends proportionally to their weights. A proper Shapley

Technology and Academic Advising: Student Usage and Preferences

Science.gov (United States)

Gaines, Trudi

2014-01-01

When both time and financial resources are limited, administrators selectively decide upon proper utilization of current technology and determine whether monies should be expended on new, flashy, and attractive technology realizing that it may not contribute to the advising experience. By obtaining feedback from the students whom the academic…

Deep Vadose Zone Applied Field Research Center: Transformational Technology Development For Environmental Remediation

International Nuclear Information System (INIS)

Wellman, Dawn M.; Triplett, Mark B.; Freshley, Mark D.; Truex, Michael J.; Gephart, Roy E.; Johnson, Timothy C.; Chronister, Glen B.; Gerdes, Kurt D.; Chamberlain, Skip; Marble, Justin; Ramirez, Rosa

2011-01-01

DOE-EM, Office of Groundwater and Soil Remediation and DOE Richland, in collaboration with the Hanford site and Pacific Northwest National Laboratory, have established the Deep Vadose Zone Applied Field Research Center (DVZ-AFRC). The DVZ-AFRC leverages DOE investments in basic science from the Office of Science, applied research from DOE EM Office of Technology Innovation and Development, and site operation (e.g., site contractors [CH2M HILL Plateau Remediation Contractor and Washington River Protection Solutions], DOE-EM RL and ORP) in a collaborative effort to address the complex region of the deep vadose zone. Although the aim, goal, motivation, and contractual obligation of each organization is different, the integration of these activities into the framework of the DVZ-AFRC brings the resources and creativity of many to provide sites with viable alternative remedial strategies to current baseline approaches for persistent contaminants and deep vadose zone contamination. This cooperative strategy removes stove pipes, prevents duplication of efforts, maximizes resources, and facilitates development of the scientific foundation needed to make sound and defensible remedial decisions that will successfully meet the target cleanup goals for one of DOE EM's most intractable problems, in a manner that is acceptable by regulators.

Limited-memory adaptive snapshot selection for proper orthogonal decomposition

Energy Technology Data Exchange (ETDEWEB)

Oxberry, Geoffrey M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kostova-Vassilevska, Tanya [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Arrighi, Bill [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chand, Kyle [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2015-04-02

Reduced order models are useful for accelerating simulations in many-query contexts, such as optimization, uncertainty quantification, and sensitivity analysis. However, offline training of reduced order models can have prohibitively expensive memory and floating-point operation costs in high-performance computing applications, where memory per core is limited. To overcome this limitation for proper orthogonal decomposition, we propose a novel adaptive selection method for snapshots in time that limits offline training costs by selecting snapshots according an error control mechanism similar to that found in adaptive time-stepping ordinary differential equation solvers. The error estimator used in this work is related to theory bounding the approximation error in time of proper orthogonal decomposition-based reduced order models, and memory usage is minimized by computing the singular value decomposition using a single-pass incremental algorithm. Results for a viscous Burgers’ test problem demonstrate convergence in the limit as the algorithm error tolerances go to zero; in this limit, the full order model is recovered to within discretization error. The resulting method can be used on supercomputers to generate proper orthogonal decomposition-based reduced order models, or as a subroutine within hyperreduction algorithms that require taking snapshots in time, or within greedy algorithms for sampling parameter space.

32 CFR 147.15 - Guideline M-Misuse of Information technology systems.

Science.gov (United States)

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Guideline M-Misuse of Information technology... CLASSIFIED INFORMATION Adjudication § 147.15 Guideline M—Misuse of Information technology systems. (a) The... ability to properly protect classified systems, networks, and information. Information Technology Systems...

Applying the Theory of the Firm to Examine a Technology Startup at the Investment Stage

Directory of Open Access Journals (Sweden)

Michael Ayukawa

2012-05-01

Full Text Available The investment stage of a new technology firm is when resources, opportunities, investors, and early customers first converge. Currently, technology entrepreneurs make many expensive mistakes. They invest in assets and develop capabilities that prove to have limited value. They take too long to discover and validate the product-market fit for their firms during the investment stage and run out of time and money. Understanding how theory can help entrepreneurs make decisions during the investment stage is important to accelerate new-firm formation and growth as well as to reduce the uncertainty of founders and stakeholders of technology firms. This article introduces a model developed to examine deal making during the investment stage of a new technology firm. It is an extension of a model of lateral firm scope proposed by Oliver Hart and Bengt Holmstrom. The extensions come from considering a technology firm as being both a deal-making entity and a pool of resources during the investment stage. A deal is the result of a decision the entrepreneur and others make to coordinate (i.e., work together to achieve a common objective. Benefits from a deal include cash profits for the firm and private benefits for the entrepreneur. This extended model is then applied to examine the author’s firm which is still in the investment stage. Application of the extended model to a real-life situation generated two important insights: i when private benefits include learning from experimentation, the number of deals increases and ii at the start of the investment stage, private benefits drive deal-making, whereas at the end of the investment stage, cash profits derived from asset ownership drive deal-making.

Cost escalation in health - care technology possible solutions | Járos ...

African Journals Online (AJOL)

Solutions to cost escalation due to health-care technology are proposed. It is argued that proper systems analysis, technology assessment, and planning would result in net savings and itnproved cost-benefits. Identification of needs early in the technological life cycle can positively influence the final form of the chosen ...

Applied mathematics

CERN Document Server

Logan, J David

2013-01-01

Praise for the Third Edition"Future mathematicians, scientists, and engineers should find the book to be an excellent introductory text for coursework or self-study as well as worth its shelf space for reference." -MAA Reviews Applied Mathematics, Fourth Edition is a thoroughly updated and revised edition on the applications of modeling and analyzing natural, social, and technological processes. The book covers a wide range of key topics in mathematical methods and modeling and highlights the connections between mathematics and the applied and nat

The Multistability of Technological Breakdowns in Education

DEFF Research Database (Denmark)

Andersen, Bjarke Lindsø; Tafdrup, Oliver Alexander

2017-01-01

Introduction Everyone who is involved with modern technological artefacts such as computers, software and tablets has experienced situations where the artefacts suddenly cease to function properly. This is commonly known as a technological breakdown. Within education and the praxis of teaching...... technological breakdowns become a more and more ubiquitous phenomenon due to the rapid increase of technological artefacts utilized for educational purposes (Riis, 2012). The breakdowns impact the educational practice with consequences ranging from creating small obstacles to rendering it impossible to conduct...... successful teaching. Thus, knowing how to cope with technological breakdowns is a pivotal part of being a technological literate....

Applying artificial intelligence to astronomical databases - a surveyof applicable technology.

Science.gov (United States)

Rosenthal, D. A.

This paper surveys several emerging technologies which are relevant to astronomical database issues such as interface technology, internal database representation, and intelligent data reduction aids. Among the technologies discussed are natural language understanding, frame and object representations, planning, pattern analysis, machine learning and the nascent study of simulated neural nets. These techniques will become increasingly important for astronomical research, and in particular, for applications with large databases.

Proper-time quantum-mechanics and the Klein paradox

International Nuclear Information System (INIS)

Thaller, B.

1981-01-01

Scattering at high potential-steps is treated in the framework of relativistic proper-time theory. No paradox arises in contrast to Dirac's wavemechanics (''Klein's paradox''); pair creation may happen with a certain probability and may be described as a scattering process with ordinary quantum-mechanical methods. (author)

Positions and proper motions of dwarf carbon stars

Science.gov (United States)

Deutsch, Eric W.

1994-01-01

Recent-epochs positions and proper motions of nine dwarf carbon star candidates are presented along with finding charts for each object. Measurements are obtained from digitized Palomar Observatory Sky Survey (POSS) and Quik V plate archives at the Space Telescope Science Institute, and from recent CCD images.

The relationship between perceived stress and computer technology attitude: an application on health sciences students.

Science.gov (United States)

Ozyurek, Pakize; Oztasan, Nuray; Kilic, Ibrahim

2015-02-01

The aim of this study is to define attitudes of students in health sciences towards perceived personal stress and computer technologies, and to present the relationship between stress and computer technology attitudes. In this scope, this study has a descriptive nature and thus a questionnaire has been applied on 764 students from Afyon Kocatepe University Health Sciences High School, Turkey for data gathering. Descriptive statistics, independent samples, t test, one way ANOVA, and regression analysis have been used for data analysis. In the study, it is seen that female (=3,78) have a more positive attitude towards computer technology than male students (=3,62). according to the results of regression analysis of the study, the regression model between computer technology attitude (CTA) and perceived stress (PS) has been found meaningful (F=16,291; ptechnology attitude and perceived stress (when computer technology altitude increases, perceived stress decreases), and an increase of one unit in computer attitude results in 0.275 decrease in perceived stress. it can be concluded that correct and proper use of computer technologies can be accepted as a component of overcoming stress methods.

How to get properly rid of confidential data?

CERN Multimedia

Computer Security Team

2012-01-01

Have you ever bought a used laptop on ebay? Try it and you might not only get (hopefully) functional hardware, but also a bunch of personal files, intriguing photos, sensitive documents, etc. Not everybody worries enough to clean the local hard disks properly before selling their equipment or giving it away. So the next owner of the hard disk can comfortably crawl through the remaining data, and use it at his or her convenience...   In fact, properly cleaning a hard disk is difficult! Deleting local files or formatting the hard disk usually just purges the files from being listed in the folder, but the actual data remains intact on the hard disk. Freely available tools can easily reconstruct those files and, thus, expose it. It is better practice to get rid of your files by running tools like “shred” on the Linux platform (try “shred –fuvzn1 [FILENAME]” or check “man shred” for details), or “File Shredder&rdqu...

Proper Use of Audio-Visual Aids: Essential for Educators.

Science.gov (United States)

Dejardin, Conrad

1989-01-01

Criticizes educators as the worst users of audio-visual aids and among the worst public speakers. Offers guidelines for the proper use of an overhead projector and the development of transparencies. (DMM)

The challenges of migration and technological development in Africa

African Journals Online (AJOL)

This paper critically studies he problems posed by migration and technological development in Africa. Migration and African technological development have been two paradoxical or polarized contemporary issues even in our 21st century Africa. Migration if not properly controlled has a deleterious implication that can ...

Handbook of display technology

CERN Document Server

Castellano, Joseph A

1992-01-01

This book presents a comprehensive review of technical and commercial aspects of display technology. It provides design engineers with the information needed to select proper technology for new products. The book focuses on flat, thin displays such as light-emitting diodes, plasma display panels, and liquid crystal displays, but it also includes material on cathode ray tubes. Displays include a large number of products from televisions, auto dashboards, radios, and household appliances, to gasoline pumps, heart monitors, microwave ovens, and more.For more information on display tech

Applied Control Systems Design

CERN Document Server

Mahmoud, Magdi S

2012-01-01

Applied Control System Design examines several methods for building up systems models based on real experimental data from typical industrial processes and incorporating system identification techniques. The text takes a comparative approach to the models derived in this way judging their suitability for use in different systems and under different operational circumstances. A broad spectrum of control methods including various forms of filtering, feedback and feedforward control is applied to the models and the guidelines derived from the closed-loop responses are then composed into a concrete self-tested recipe to serve as a check-list for industrial engineers or control designers. System identification and control design are given equal weight in model derivation and testing to reflect their equality of importance in the proper design and optimization of high-performance control systems. Readers’ assimilation of the material discussed is assisted by the provision of problems and examples. Most of these e...

Energy conservation employing membrane-based technology

International Nuclear Information System (INIS)

Narayanan, C.M.

1993-01-01

Membranes based processes, if properly adapted to industrial processes have good potential with regard to optimisation and economisation of energy consumption. The specific benefits of MBT (membrane based technology) as an energy conservation methodology are highlighted. (author). 6 refs

MANAGEMENT basic professional educational program IN THE CONDITIONS OF information and educational environment based on cloud TECHNOLOGIES

Directory of Open Access Journals (Sweden)

O. F. Bryksina

2016-01-01

Full Text Available The article substantiates the advantages of building information-educational environment of the basic professional educational program based on cloud technologies. Universal tool for building information-educational environment is Google Apps for Education services, which allows to organize the effective cooperation of all participants of the educational process, to plan collaborative activities, properly allocate resources and provide the solution of various learning tasks by necessary tools. Examples of using various Google-services in the organization of the collaborative activities of teachers of the department of applied informatics and information technologies in education of the Minin Nizhny Novgorod State Pedagogical University to improve implementation of the basic professional educational program in the direction of preparation "Information systems and technology". The core of the informational and educational environment of the basic professional educational program is Google-site that integrates different Google services and Google Apps applications.

AGH University of Science and Technology, Faculty of Physics and Applied Computer Science, Annual Report 2008

International Nuclear Information System (INIS)

2009-01-01

The most important research activities of the Faculty are condensed matter physics and physics of elementary particles. Advanced fundamental as well as applied studies are also carried out in the fields of nuclear physics and technology, electronics, environmental physics and medicinal physics. Report presents short descriptions of the results obtained in 2009. It contains also list of 198 papers published in the national and international scientific journals and of 6 book chapters published in 2009. Report contains full list of grants (national and international) realized in 2009 [pl

Applying deep learning technology to automatically identify metaphase chromosomes using scanning microscopic images: an initial investigation

Science.gov (United States)

Qiu, Yuchen; Lu, Xianglan; Yan, Shiju; Tan, Maxine; Cheng, Samuel; Li, Shibo; Liu, Hong; Zheng, Bin

2016-03-01

Automated high throughput scanning microscopy is a fast developing screening technology used in cytogenetic laboratories for the diagnosis of leukemia or other genetic diseases. However, one of the major challenges of using this new technology is how to efficiently detect the analyzable metaphase chromosomes during the scanning process. The purpose of this investigation is to develop a computer aided detection (CAD) scheme based on deep learning technology, which can identify the metaphase chromosomes with high accuracy. The CAD scheme includes an eight layer neural network. The first six layers compose of an automatic feature extraction module, which has an architecture of three convolution-max-pooling layer pairs. The 1st, 2nd and 3rd pair contains 30, 20, 20 feature maps, respectively. The seventh and eighth layers compose of a multiple layer perception (MLP) based classifier, which is used to identify the analyzable metaphase chromosomes. The performance of new CAD scheme was assessed by receiver operation characteristic (ROC) method. A number of 150 regions of interest (ROIs) were selected to test the performance of our new CAD scheme. Each ROI contains either interphase cell or metaphase chromosomes. The results indicate that new scheme is able to achieve an area under the ROC curve (AUC) of 0.886+/-0.043. This investigation demonstrates that applying a deep learning technique may enable to significantly improve the accuracy of the metaphase chromosome detection using a scanning microscopic imaging technology in the future.

Proper Elements and Secular Resonances for Irregular Satellites

Science.gov (United States)

Beaugé, C.; Nesvorný, D.

2007-06-01

We present results of an analytical study of proper elements and secular resonances for the irregular satellites of the outer planets. In the case of the Jovian system we identify three satellite families, two of them previously known (Carme and Ananke), plus a new agglomeration of four bodies that includes Pasiphae as its largest member. While the distribution of proper elements for Saturn's moons seems to be more random, a small cluster was found for the direct moons formed by Albiorix, Erriapo, and 2004 S1, slightly different from the so-called Gaulish cluster. No significant families are detected in the present study for the Uranian or Neptunian satellite systems. For each satellite system we determine the location of several secular resonances in the proper element space. Apart from the well-known resonance locks of Pasiphae, Sinope, and Siarnaq, a comparison between the resonance locations and proper elements shows that Saturn's satellite Narvi also exhibits temporary librations in the ϖ-ϖsolar resonance. However, unlike the resonant Jovian moons that are located in the same configuration, Narvi's critical argument librates alternately around values near 90° and 270°. Neither the Uranian nor Neptunian systems seem to have resonant moons. The resonant dynamics of the real satellites in the vicinity of ϖ˙-ϖ˙solar=0 is studied with a simple model for secular resonances based on the restricted three-body problem. Depending on the initial conditions, we show the existence of one or two modes of libration that can occur at different values of the critical angle, showing a good correspondence with the observed behavior of all the resonant moons. Finally, we discuss the global distribution of the real satellites with respect to the secular resonances, as compared with synthetic populations of bodies drawn solely from stability conditions. For Saturn, we find that the present satellite population appears compatible with simple random distributions. Although

Improving the Validity of Quantitative Measures in Applied Linguistics Research

Science.gov (United States)

Purpura, James E.; Brown, James Dean; Schoonen, Rob

2015-01-01

In empirical applied linguistics research it is essential that the key variables are operationalized in a valid and reliable way, and that the scores are treated appropriately, allowing for a proper testing of the hypotheses under investigation. The current article addresses several theoretical and practical issues regarding the use of measurement…

Applying Sensor-Based Technology to Improve Construction Safety Management.

Science.gov (United States)

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-08-11

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions.

Proper comparison among methods using a confusion matrix

CSIR Research Space (South Africa)

Salmon

2015-07-01

Full Text Available -1 IGARSS 2015, Milan, Italy, 26-31 July 2015 Proper comparison among methods using a confusion matrix 1,2 B.P. Salmon, 2,3 W. Kleynhans, 2,3 C.P. Schwegmann and 1J.C. Olivier 1School of Engineering and ICT, University of Tasmania, Australia 2...

Applying Internet-based Technologies to Teaching Corporate Finance and Investments

Directory of Open Access Journals (Sweden)

Zhuoming “Joe” Peng, Ph.D.,

2006-07-01

Full Text Available Finance faculty are increasingly encouraged to use internet-based technologies in teaching. This paper examines students’ perceptions of finance faculty who use internet-based technologies and the impact on their learning experiences in undergraduate introductory corporate finance, investments, and MBA investments courses. The results suggest that offering all course materials online may enhance students’ learning experiences, however, the technologies may be best thought of as teaching tools. A better methodology for a finance course delivery may be that of in-classroom interactions between an instructor and the students while all the pertinent course materials are available online throughout the semester. There is a statistically significant difference between MBA (Master of Business Administration students and undergraduate business students in terms of their desire to use the internet for learning finance. Consistent with previous research, results indicate that it may not be common practice among faculty to use internet-based technologies, and that assistant professors tend to use technologies in teaching more often than their higher-ranked colleagues do.

Technology of geographical information systems applied to the licensing of nuclear sector installations

International Nuclear Information System (INIS)

Oliveira, Aline F.G. De; Barreto, Alberto A.; Carvalho Filho, Carlos A. de; Rodrigues, Paulo Cezar Horta; Moura, Igor Felipe Silva

2017-01-01

The nuclear licensing process involves the preparation of documents such as Local's Report (LR), Preliminary Safety Analysis Report (PSAR), Final Safety Analysis Report (FSAR), Physical Protection Plans, Radiation Protection Plans and Emergency plans that must be submit to the National Nuclear Energy Commission (DRS / CNEN) for approval. This work presents an analysis and a guide for the use of Geoprocessing tools in the updating of environmental studies necessary to update the Local's Report (LR) of the Center for the Development of Nuclear Technology (CDTN). The main purpose is to contribute to streamline the execution of steps involved in the nuclear licensing process, such as structuring and executing environmental studies, planning environmental monitoring activities, etc. To achieve the objective, we search for and obtained available data of high reliability in various organs using a methodological flowchart for data acquisition and treatment. The study was develop using the ArcMap 10.2 application from ArcGis, especially the Model Builder analytic tool. This tool allowed the (macro) schematization of the methodology from the applied GIS tools, which presents as advantages to the efficiency and optimization of the execution time of the procedures in situations where it is necessary to apply the same routine of tasks, besides the fact of being editable, which offers possibilities for adaptations and improvements. (author)

Technology of geographical information systems applied to the licensing of nuclear sector installations

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Aline F.G. De; Barreto, Alberto A.; Carvalho Filho, Carlos A. de; Rodrigues, Paulo Cezar Horta [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Moura, Igor Felipe Silva, E-mail: afgo@cdtn.br, E-mail: aab@cdtn.br, E-mail: cacf@cdtn.br, E-mail: igorfelipedx@ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil)

2017-07-01

The nuclear licensing process involves the preparation of documents such as Local's Report (LR), Preliminary Safety Analysis Report (PSAR), Final Safety Analysis Report (FSAR), Physical Protection Plans, Radiation Protection Plans and Emergency plans that must be submit to the National Nuclear Energy Commission (DRS / CNEN) for approval. This work presents an analysis and a guide for the use of Geoprocessing tools in the updating of environmental studies necessary to update the Local's Report (LR) of the Center for the Development of Nuclear Technology (CDTN). The main purpose is to contribute to streamline the execution of steps involved in the nuclear licensing process, such as structuring and executing environmental studies, planning environmental monitoring activities, etc. To achieve the objective, we search for and obtained available data of high reliability in various organs using a methodological flowchart for data acquisition and treatment. The study was develop using the ArcMap 10.2 application from ArcGis, especially the Model Builder analytic tool. This tool allowed the (macro) schematization of the methodology from the applied GIS tools, which presents as advantages to the efficiency and optimization of the execution time of the procedures in situations where it is necessary to apply the same routine of tasks, besides the fact of being editable, which offers possibilities for adaptations and improvements. (author)

Experimental verification of active IR stealth technology by controlling the surface temperature using a thermoelectric element

Energy Technology Data Exchange (ETDEWEB)

Kim, Dong Geon; Han, Kuk Il; Choi, Jun Hyuk; Kim, Tae Kuk [Dept. of Mechanical Engineering, Chung Ang University, Seoul (Korea, Republic of)

2016-10-15

In this paper, we propose a technique for IR low-observability that uses an active IR signal tuning through the real time control of the object surface temperature according to the varying background environment. This is achieved by applying the proper object surface temperature obtained to result in the minimum radiance difference between the object and the background. Experimental verification by using the thermoelectric temperature control element shows that the IR radiance contrast between the object and the background can be reduced up to 99% during the night and up to 95% during the day time as compared to the un-tuned original radiance contrast values. The stealth technology demonstrated in this paper may be applied for many military systems needed for the IR stealth performance when a suitable temperature control unit is developed.

Experimental verification of active IR stealth technology by controlling the surface temperature using a thermoelectric element

International Nuclear Information System (INIS)

Kim, Dong Geon; Han, Kuk Il; Choi, Jun Hyuk; Kim, Tae Kuk

2016-01-01

In this paper, we propose a technique for IR low-observability that uses an active IR signal tuning through the real time control of the object surface temperature according to the varying background environment. This is achieved by applying the proper object surface temperature obtained to result in the minimum radiance difference between the object and the background. Experimental verification by using the thermoelectric temperature control element shows that the IR radiance contrast between the object and the background can be reduced up to 99% during the night and up to 95% during the day time as compared to the un-tuned original radiance contrast values. The stealth technology demonstrated in this paper may be applied for many military systems needed for the IR stealth performance when a suitable temperature control unit is developed

Advanced Information Technology Investments at the NASA Earth Science Technology Office

Science.gov (United States)

Clune, T.; Seablom, M. S.; Moe, K.

2012-12-01

The NASA Earth Science Technology Office (ESTO) regularly makes investments for nurturing advanced concepts in information technology to enable rapid, low-cost acquisition, processing and visualization of Earth science data in support of future NASA missions and climate change research. In 2012, the National Research Council published a mid-term assessment of the 2007 decadal survey for future spacemissions supporting Earth science and applications [1]. The report stated, "Earth sciences have advanced significantly because of existing observational capabilities and the fruit of past investments, along with advances in data and information systems, computer science, and enabling technologies." The report found that NASA had responded favorably and aggressively to the decadal survey and noted the role of the recent ESTO solicitation for information systems technologies that partnered with the NASA Applied Sciences Program to support the transition into operations. NASA's future missions are key stakeholders for the ESTO technology investments. Also driving these investments is the need for the Agency to properly address questions regarding the prediction, adaptation, and eventual mitigation of climate change. The Earth Science Division has championed interdisciplinary research, recognizing that the Earth must be studied as a complete system in order toaddress key science questions [2]. Information technology investments in the low-mid technology readiness level (TRL) range play a key role in meeting these challenges. ESTO's Advanced Information Systems Technology (AIST) program invests in higher risk / higher reward technologies that solve the most challenging problems of the information processing chain. This includes the space segment, where the information pipeline begins, to the end user, where knowledge is ultimatelyadvanced. The objectives of the program are to reduce the risk, cost, size, and development time of Earth Science space-based and ground

Radiotracer technology as applied to industry. Final report of a co-ordinated research project 1997-2000

International Nuclear Information System (INIS)

2001-12-01

The Co-ordinated Research Project (CRP) on Radiotracer Technology for Engineering Unit Operation Studies and Unit Process Optimization was carried out by the International Atomic Energy Agency (IAEA) from December 1997 until December 2000. The project developed and validated procedures and protocols for investigation of major industrial processes, including fluidized beds, sugar crystallizers, trickle bed reactors, cement rotary kilns, flotation cells, grinding mills, incinerators, wastewater treatment units and interwell communications in oil fields. This publication is the output of the above mentioned CRP. It provides the principles and state of the art of radiotracer methodology and technology as applied to industry and environment. It is expected to provide wider interest for further development of skills and confidence prior to carrying out field work. It facilitates transfer of technology from developed to developing countries and from nuclear research institutions to industrial end users. The publication could be a suitable guide for radiotracer applications in almost all types of process investigations. The case studies described in this publication deal with typical problems in industry and environment common to all countries. It is intended for radiotracer groups as well as for end engineers and managers from chemical and petrochemical industries, mineral ore and raw material processing, wastewater treatment plants, and other industrial sectors

Creative Economy as Applied to Information Technology (IT Companies

Directory of Open Access Journals (Sweden)

Leonardo Fabris Lugoboni

2014-06-01

Full Text Available This research addresses creative economy, wherein creative industries are deemed amongst the economy's most dynamic sectors and are characterized as being those that highly prize intellectual capital, invest in technology and innovation. Collectively, these in turn offer individuals, businesses and cities opportunities to generate economic growth and development. The study herein presented sought to examine the application of creative economy at information technology companies. To this effect, IT professionals and others who work at large technology companies were interviewed so as to identify creative economy characteristics at companies comprised by this specific economic sector. Findings enabled the conclusion that creative economy is effectively present in IT companies´ day-to-day routines since the former is reportedly a sector that features a high degree of both dynamism and constant change, whereby creative economy characteristics help companies innovate whilst simultaneously hallmarks as being extremely demanding.

Applying Statistical Mechanics to pixel detectors

International Nuclear Information System (INIS)

Pindo, Massimiliano

2002-01-01

Pixel detectors, being made of a large number of active cells of the same kind, can be considered as significant sets to which Statistical Mechanics variables and methods can be applied. By properly redefining well known statistical parameters in order to let them match the ones that actually characterize pixel detectors, an analysis of the way they work can be performed in a totally new perspective. A deeper understanding of pixel detectors is attained, helping in the evaluation and comparison of their intrinsic characteristics and performance

Applying DEA Technique to Library Evaluation in Academic Research Libraries.

Science.gov (United States)

Shim, Wonsik

2003-01-01

This study applied an analytical technique called Data Envelopment Analysis (DEA) to calculate the relative technical efficiency of 95 academic research libraries, all members of the Association of Research Libraries. DEA, with the proper model of library inputs and outputs, can reveal best practices in the peer groups, as well as the technical…

Applied Neuroscience Laboratory Complex

Data.gov (United States)

Federal Laboratory Consortium — Located at WPAFB, Ohio, the Applied Neuroscience lab researches and develops technologies to optimize Airmen individual and team performance across all AF domains....

Statistical HR diagrams for one hundred and fifteen thousand proper-motion stars

International Nuclear Information System (INIS)

Luyten, W.J.

1978-01-01

Since regular HR diagrams require apparent magnitudes, colors or spectra, and parallaxes, and such complete data are available for relatively few stars, there may be some advantage in making up diagrams which utilize proper motions instead of parallaxes, and are thus statistically similar to an HR diagram. The reduced proper motion, first used by Hertzsprung, is defined as H=m+5+5log μ, but may also be written as H=M+5log T, where T is the tangential velocity, and is expressed in astronomical units per year. A diagram plotting H against color will thus contain the considerable dispersion in tangential velocity which is a serious disadvantage. However, this is outweighed by two practical advantages. First, the one and the same person who does the proper motion survey can, and does also determine the other two quantities needed. Second, when using data obtained from such a proper motion survey one deals, statistically, with all the stars within a given distance and the results, therefore, are much more representative of the real situation in space than many HR diagrams which often contain an unrealistic preponderance of giants. (Auth.)

32 CFR 37.1220 - Applied research.

Science.gov (United States)

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Applied research. 37.1220 Section 37.1220... REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Definitions of Terms Used in This Part § 37.1220 Applied research..., Development, Test and Evaluation programs within Budget Activity 2, Applied Research (also known informally as...

Climate-Adapted Soil Cultivation as an Aspect for Sustainable Farming – Task-Technology-Fit of a Decision Support System

Directory of Open Access Journals (Sweden)

Welf Guenther-Lübbers

2013-03-01

Full Text Available Due to global climate change and its impact on local weather conditions, decision support systems are becoming more important in agriculture. Such systems allow farmers to adapt more effectively to the complex changes affecting their farms. Marginal production sites must apply new tillage strategies adapted to new climatic conditions. Information about proper strategy adjustments is often disseminated through agricultural extension services and journals. A new internet information platform, KlimaBob, which focuses on climate-flexible tillage, was established under the auspices of the Innovation Network of Climate Change Adaptation Brandenburg Berlin. Successful and permanent introduction of such a system requires analysis and verification of its acceptance among individual farmers. This study addresses this need by applying the established task-technology fit approach. A survey was conducted among farmers in the Brandenburg region. The resulting data provided the basis for a structural equation model that explains and evaluates the task-technology fit of the KlimaBob platform. The results indicate that the performance spectrum of the system exerts a strong influence on the task-technology fit when assessed by both the name characteristics of KlimaBob and the individual characteristics of users (for example, time management, technology affinity and risk attitude.

THE TEACHERS ROLE IN FORMING PROPER BODY POSTURE

Directory of Open Access Journals (Sweden)

Zoran Bogdanović

2007-05-01

Full Text Available Being acquainted and well aware of the presence of physical deformation in school population, this study is based on the research of postural deformity of the pupils of the 5th grade of elementary school and determination of dependance of deformations appearance in relation to frequency of remonstration and indication to correct sitting position from proffesors’ perspective. The complete program content is conducted in the territory of the city of Kragujevac in several elementary schools comprising 299 students of the 5th grade. The object was to determine the number of students with kyphotic and lordotic deformity, to determine the presence of deformation in depandance of gender and to determine the presence of kyphotic and lordotic deformity in depandance of the frequency of proffesors indication to improper sitting. We can notice higher presence of kyphotic deformity at the probationers of male population that it is the case with female population while the higher presence of lordotic deformity is at female population.The highest number of probationers have reported that none of the proffesors warn them about proper sitting. The measures inside the groups sorted by gender qualifi cation, indicate on high percentage of both boys and girls who are not warned on proper sitting. Also, inside the groups of improper body holders, we can notice the most signifi cant kyphotic and lordotic deformity in the category of students who are never warned to sit properly. These indicators report us that is necessary to invest much more work on the education of parents and children as well as school stuff at the preschool and school institutions which would result in reducing the appearence and development of postural deformity at the population who is more liable to transformations of such kind.

Environmental Restoration/Waste Management - applied technology. Semiannual report, July 1992--June 1993, Volume 1, Number 2, and Volume 2, Number 1

International Nuclear Information System (INIS)

Murphy, P.W.; Bruner, J.M.; Price, M.E.; Talaber, C.J.

1993-01-01

The Environmental Restoration/Waste Management-Applied Technology (ER/WM-AT) Program is developing restoration and waste treatment technologies needed for the ongoing environmental cleanup of the Department of Energy (DOE) complex and treatment technologies for wastes generated in the nuclear weapons production complex. These technologies can find application to similar problems nationally and even worldwide. They can be demonstrated at the Livermore site, which mirrors (on a small scale) many of the environmental and waste management problems of the rest of the DOE complex. Their commercialization should speed cleanup, and the scope of the task should make it attractive to US industry. The articles in this semi-annual report cover the following areas: ceramic final forms for residues of mixed waste treatment; treatment of wastes containing sodium nitrate; actinide volatility in thermal oxidation processes; in situ microbial filters for remediating contaminated soils; collaboration with scientists in the former Soviet Union on new ER/WM technologies; and fiber-optic sensors for chlorinated organic solvents

A generalised Green-Julg theorem for proper groupoids and Banach algebras

OpenAIRE

Paravicini, Walther

2009-01-01

The Green-Julg theorem states that K_0^G(B) is isomorphic to K_0(L^1(G,B)) for every compact group G and every G-C*-algebra B. We formulate a generalisation of this result to proper groupoids and Banach algebras and deduce that the Bost assembly map is surjective for proper Banach algebras. On the way, we show that the spectral radius of an element in a C_0(X)-Banach algebra can be calculated from the spectral radius in the fibres.

Uncertainty modeling process for semantic technology

Directory of Open Access Journals (Sweden)

Rommel N. Carvalho

2016-08-01

Full Text Available The ubiquity of uncertainty across application domains generates a need for principled support for uncertainty management in semantically aware systems. A probabilistic ontology provides constructs for representing uncertainty in domain ontologies. While the literature has been growing on formalisms for representing uncertainty in ontologies, there remains little guidance in the knowledge engineering literature for how to design probabilistic ontologies. To address the gap, this paper presents the Uncertainty Modeling Process for Semantic Technology (UMP-ST, a new methodology for modeling probabilistic ontologies. To explain how the methodology works and to verify that it can be applied to different scenarios, this paper describes step-by-step the construction of a proof-of-concept probabilistic ontology. The resulting domain model can be used to support identification of fraud in public procurements in Brazil. While the case study illustrates the development of a probabilistic ontology in the PR-OWL probabilistic ontology language, the methodology is applicable to any ontology formalism that properly integrates uncertainty with domain semantics.

Journal of Applied Science and Technology - Vol 4, No 1 (1999)

African Journals Online (AJOL)

Topical Issues: Valuation, Payments and Contract for Technology Transfer. Adapted from Manual on Technology Transfer Negotiation Investment and Technology Promotion Division of UNIDO · EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. A. Ayensu, 72-81 ...

2nd Applied Electromagnetic International Conference

CERN Document Server

Sulaiman, Hamzah; Othman, Mohd; Aziz, Mohamad; Malek, Mohd

2017-01-01

In this book, experts from academia and industry present the latest advances in scientific theory relating to applied electromagnetics and examine current and emerging applications particularly within the fields of electronics, communications, and computer technology. The book is based on presentations delivered at APPEIC 2015, the 2nd Applied Electromagnetic International Conference, held in Krabi, Thailand in December 2015. The conference provided an ideal platform for researchers and specialists to deliver both theoretically and practically oriented contributions on a wide range of topics relevant to the theme of nurturing applied electromagnetics for human technology. Many novel aspects were addressed, and the contributions selected for this book highlight the relevance of advances in applied electromagnetics to a variety of industrial engineering problems and identify exciting future directions for research.

1st Applied Electromagnetic International Conference

CERN Document Server

Othman, Mohd; Aziz, Mohamad; Malek, Mohd

2015-01-01

In this book, experts from academia and industry present the latest advances in scientific theory relating to applied electromagnetics and examine current and emerging applications particularly within the fields of electronics, communications, and computer technology. The book is based on presentations delivered at APPEIC 2014, the 1st Applied Electromagnetic International Conference, held in Bandung, Indonesia in December 2014. The conference provided an ideal platform for researchers and specialists to deliver both theoretically and practically oriented contributions on a wide range of topics relevant to the theme of nurturing applied electromagnetics for human technology. Many novel aspects were addressed, and the contributions selected for this book highlight the relevance of advances in applied electromagnetics to a variety of industrial engineering problems and identify exciting future directions for research.

Pipeline cost reduction through effective project management and applied technology

Energy Technology Data Exchange (ETDEWEB)

Jenkins, A. [TransCanada Pipeline Ltd., Alberta (Canada); Babuk, T. [Empress International Inc., Westwood, NJ (United States); Mohitpour, M. [Tempsys Pipeline Solutions Inc., Vancouver, BC (Canada); Murray, M.A. [National Energy Board of Canada (Canada)

2005-07-01

Pipelines are regarded by many as passive structures with the technology involved in their construction and operation being viewed as relatively simple and stable. If such is the case how can there be much room for cost improvement? In reality, there have been many technological and regulatory innovations required within the pipeline industry to meet the challenges posed by ever increasing consumer demand for hydrocarbons, the effects of aging infrastructure and a need to control operating and maintenance expenditures. The importance of technology management, as a subset of overall project management, is a key element of life cycle cost control. Assurance of public safety and the integrity of the system are other key elements in ensuring a successful pipeline project. The essentials of best practise project management from an owner/ operator's perspective are set out in the paper. Particular attention is paid to the appropriate introduction of new technology, strategic procurement practice and material selection, indicating that capital cost savings of up to 15% are achievable without harming life cycle cost. The value of partnering leading to technical innovation, cost savings and improved profitability for all the participants is described. Partnering also helps avoid duplicated effort through the use of common tools for design, planning schedule tracking and reporting. Investing in appropriate technology development has been a major source of cost reduction in recent years and the impact of a number of these recently introduced technologies in the areas of materials, construction processes and operation and maintenance are discussed in the paper. (author)

Treatment of Proper Name Retrieval Deficits in an Individual with Temporal Lobe Epilepsy

Science.gov (United States)

Minkina, Irene; Ojemann, Jeffrey G.; Grabowski, Thomas J.; Silkes, JoAnn P.; Phatak, Vaishali; Kendall, Diane L.

2013-01-01

Purpose: Studies investigating language deficits in individuals with left temporal-lobe epilepsy have consistently demonstrated impairments in proper name retrieval. The aim of this Phase I rehabilitation study was to investigate the effects of a linguistically distributed word retrieval treatment on proper name retrieval in an individual with…

Applied survival analysis using R

CERN Document Server

Moore, Dirk F

2016-01-01

Applied Survival Analysis Using R covers the main principles of survival analysis, gives examples of how it is applied, and teaches how to put those principles to use to analyze data using R as a vehicle. Survival data, where the primary outcome is time to a specific event, arise in many areas of biomedical research, including clinical trials, epidemiological studies, and studies of animals. Many survival methods are extensions of techniques used in linear regression and categorical data, while other aspects of this field are unique to survival data. This text employs numerous actual examples to illustrate survival curve estimation, comparison of survivals of different groups, proper accounting for censoring and truncation, model variable selection, and residual analysis. Because explaining survival analysis requires more advanced mathematics than many other statistical topics, this book is organized with basic concepts and most frequently used procedures covered in earlier chapters, with more advanced topics...

Fundamental Research Applied To Enable Hardware Performance in Microgravity

Science.gov (United States)

Sheredy, William A.

2005-01-01

NASA sponsors microgravity research to generate knowledge in physical sciences. In some cases, that knowledge must be applied to enable future research. This article describes one such example. The Dust and Aerosol measurement Feasibility Test (DAFT) is a risk-mitigation experiment developed at the NASA Glenn Research Center by NASA and ZIN Technologies, Inc., in support of the Smoke Aerosol Measurement Experiment (SAME). SAME is an investigation that is being designed for operation in the Microgravity Science Glovebox aboard the International Space Station (ISS). The purpose of DAFT is to evaluate the performance of P-Trak (TSI Incorporated, Shoreview, MN)--a commercially available condensation nuclei counter and a key SAME diagnostic- -in long-duration microgravity because of concerns about its ability to operate properly in that environment. If its microgravity performance is proven, this device will advance the state of the art in particle measurement capabilities for space vehicles and facilities, such as aboard the ISS. The P-Trak, a hand-held instrument, can count individual particles as small as 20 nm in diameter in an aerosol stream. Particles are drawn into the device by a built-in suction pump. Upon entering the instrument, these particles pass through a saturator tube where they mix with an alcohol vapor (see the following figure). This mixture then flows through a cooled condenser tube where some of the alcohol condenses onto the sample particles, and the droplets grow in a controlled fashion until they are large enough to be counted. These larger droplets pass through an internal nozzle and past a focused laser beam, producing flashes of light that are sensed by a photodetector and then counted to determine particle number concentration. The operation of the instrument depends on the proper internal flow and recycling of isopropyl alcohol in both the vapor and liquid phases.

77 FR 70484 - Preoperational Testing of Onsite Electric Power Systems To Verify Proper Load Group Assignments...

Science.gov (United States)

2012-11-26

...-1294, ``Preoperational Testing of On-Site Electric Power Systems to Verify Proper Load Group... entitled ``Preoperational Testing of On- Site Electric Power Systems to Verify Proper Load Group... Electric Power Systems to Verify Proper Load Group Assignments, Electrical Separation, and Redundancy...

Applied Physics Division 1998 Progress Report

International Nuclear Information System (INIS)

Cecchini, M.; Crescentini, L; Ghezzi, L.; Kent, C.; Bottomei, M.

2001-01-01

This report outlines the 1998 research activities carried out by the Applied Physics Division of the Innovation Department of ENEA (Italian Agency for New Technologies, Energy and Environment). The fields addressed and discussed include: optical and electro-optical technologies (chaps. 1 and 2); accelerator technologies (chap. 3); diagnostic systems for science and engineering (chaps. 4 and 5); theory, modelling and computational methods (chaps. 6 and 7). The aim of the Applied Physics Division is to develop technologies and systems that can be directly applied by internal (ENEA) and external users in research (high-resolution spectroscopy, laser-generated soft-x-ray sources), production processes (laser material photoproduction, structural analysis), social, cultural and environmental sciences (laser remote sensing, modelling of ecosystems and population dynamics) and medicine (particle accelerator for radiotherapy). Most of the work in 1998 was performed by the division's laboratories at the Frascati, Casaccia and Bologna Research Centres of ENEA; some was done elsewhere in collaboration with other ENEA units, external laboratories and industries. A good share of the activities was carried out for international projects; in particular, the IV European Union Framework Program

Applied Physics Division 1998 Progress Report

Energy Technology Data Exchange (ETDEWEB)

Cecchini, M.; Crescentini, L; Ghezzi, L.; Kent, C.; Bottomei, M. [ENEA, Centro Ricerche Frascati, Frascati, RM (Italy). Applied physics Division

1999-07-01

This report outlines the 1998 research activities carried out by the Applied Physics Division of the Innovation Department of ENEA (Italian Agency for New Technologies, Energy and Environment). The fields addressed and discussed include: optical and electro-optical technologies (chaps. 1 and 2); accelerator technologies (chap. 3); diagnostic systems for science and engineering (chaps. 4 and 5); theory, modelling and computational methods (chaps. 6 and 7). The aim of the Applied Physics Division is to develop technologies and systems that can be directly applied by internal (ENEA) and external users in research (high-resolution spectroscopy, laser-generated soft-x-ray sources), production processes (laser material photoproduction, structural analysis), social, cultural and environmental sciences (laser remote sensing, modelling of ecosystems and population dynamics) and medicine (particle accelerator for radiotherapy). Most of the work in 1998 was performed by the division's laboratories at the Frascati, Casaccia and Bologna Research Centres of ENEA; some was done elsewhere in collaboration with other ENEA units, external laboratories and industries. A good share of the activities was carried out for international projects; in particular, the IV European Union Framework Program.

UCAC3 PROPER MOTION SURVEY. II. DISCOVERY OF NEW PROPER MOTION STARS IN UCAC3 WITH 0.''40 yr–1 > μ ≥ 0.''18 yr–1 BETWEEN DECLINATIONS –47° and 00°

International Nuclear Information System (INIS)

Finch, Charlie T.; Zacharias, Norbert; Boyd, Mark R.; Henry, Todd J.; Hambly, Nigel C.

2012-01-01

We present 474 new proper motion stellar systems in the southern sky having no previously known components, with 0.''40 yr –1 >μ ≥ 0.''18 yr –1 between declinations –47° and 0°. In this second paper utilizing the U.S. Naval Observatory third CCD Astrograph Catalog (UCAC3) we complete our sweep of the southern sky for objects in the proper motion range targeted by this survey with R magnitudes ranging from 9.80 to 19.61. The new systems contribute a ∼16% increase in the number of new stellar systems for the same region of sky reported in previous SuperCOSMOS Research Consortium On Nearby Stars (RECONS) surveys. Among the newly discovered stellar systems are 16 multiples, plus an additional ten components that are new common proper motion companions to previously known objects. A comparison of UCAC3 proper motions to those from Hipparcos, Tycho-2, Southern Proper Motion, and SuperCOSMOS indicates that all proper motions are consistent to ∼10 mas yr –1 , with the exception of SuperCOSMOS. Distance estimates are derived for all stellar systems having SuperCOSMOS Sky Survey B J , R 59F , and I IVN plate magnitudes and Two Micron All Sky Survey (2MASS) infrared photometry. We find five new red dwarf systems estimated to be within 25 pc. These discoveries support results from previous proper motion surveys suggesting that more nearby stellar systems are to be found, particularly in the fainter, slower moving samples. In this second paper utilizing the UCAC3 we complete our sweep of the southern sky for objects in the proper motion range targeted by this survey with R magnitudes ranging from 9.80 to 19.61.

Feed-in tariffs for promotion of energy storage technologies

Energy Technology Data Exchange (ETDEWEB)

Krajacic, Goran, E-mail: Goran.Krajacic@fsb.h [University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lucica 5, 10002 Zagreb (Croatia); Duic, Neven, E-mail: Neven.Duic@fsb.h [University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lucica 5, 10002 Zagreb (Croatia); Instituto Superior Tecnico, Lisbon (Portugal); Tsikalakis, Antonis, E-mail: atsikal@corfu.power.ece.ntua.g [National Technical University of Athens, Athens (Greece); Zoulias, Manos, E-mail: mzoulias@cres.g [Centre for Renewable Energy Sources and Savings (CRES), Pikermi (Greece); Caralis, George, E-mail: gcaralis@central.ntua.g [National Technical University of Athens, Athens (Greece); Panteri, Eirini, E-mail: panteri@rae.g [Regulatory Authority for Energy (RAE), Athens (Greece); Carvalho, Maria da Graca, E-mail: mariadagraca.carvalho@europarl.europa.e [Instituto Superior Tecnico, Lisbon (Portugal)

2011-03-15

Faster market integration of new energy technologies can be achieved by use of proper support mechanisms that will create favourable market conditions for such technologies. The best examples of support mechanisms presented in the last two decades have been the various schemes for the promotion of renewable energy sources (RES). In the EU, the most successful supporting schemes are feed-in tariffs which have significantly increased utilisation of renewable energy sources in Germany, Spain, Portugal, Denmark and many other EU countries. Despite the successful feed-in tariffs for RES promotion, in many cases RES penetration is limited by power system requirements linked to the intermittency of RES sources and technical capabilities of grids. These problems can be solved by implementation of energy storage technologies like reversible or pumped hydro, hydrogen, batteries or any other technology that can be used for balancing or dump load. In this paper, feed-in tariffs for various energy storage technologies are discussed along with a proposal for their application in more appropriate regions. After successful application on islands and outermost regions, energy storage tariffs should be also applied in mainland power systems. Increased use of energy storage could optimise existing assets on the market. - Research highlights: {yields} Feed-in tariffs will promote development and use of energy storage technologies. {yields} Energy storage effectively increases RES penetration. {yields} Pumped Hydro Storage: an efficient solution for RES integration in islands. {yields} Remuneration of Batteries and Inverters as a service can increase RES Penetration. {yields} Desalination, apart from water can help in more efficient RES integration.

Rawls's Wide Reflective Equilibrium as a Method for Engaged Interdisciplinary Collaboration: Potentials and Limitations for the Context of Technological Risks.

Science.gov (United States)

Doorn, Neelke; Taebi, Behnam

2018-05-01

The introduction of new technologies in society is sometimes met with public resistance. Supported by public policy calls for "upstream engagement" and "responsible innovation," recent years have seen a notable rise in attempts to attune research and innovation processes to societal needs, so that stakeholders' concerns are taken into account in the design phase of technology. Both within the social sciences and in the ethics of technology, we see many interdisciplinary collaborations being initiated that aim to address tensions between various normative expectations about science and engineering and the actual outcomes. However, despite pleas to integrate social science research into the ethics of technology, effective normative models for assessing technologies are still scarce. Rawls's wide reflective equilibrium (WRE) is often mentioned as a promising approach to integrate insights from the social sciences in the normative analysis of concrete cases, but an in-depth discussion of how this would work in practice is still lacking. In this article, we explore to what extent the WRE method can be used in the context of technology development. Using cases in engineering and technology development, we discuss three issues that are currently neglected in the applied ethics literature on WRE. The first issue concerns the operationalization of abstract background theories to moral principles. The second issue concerns the inclusiveness of the method and the demand for openness. The third issue is how to establish whether or not an equilibrium has been reached. These issues should be taken into account when applying the methods to real-world cases involving technological risks. Applying the WRE method in the context of engaged interdisciplinary collaboration requires sensitivity for issues of power and representativeness to properly deal with the dynamics between the technical and normative researchers involved as well as society at large.

Proper Lens Care (A Minute of Health with CDC)

Centers for Disease Control (CDC) Podcasts

Wearing contact lenses is a convenient way to improve vision without having to wear glasses. But unlike glasses, improper care and maintenance of lenses can result in severe eye problems, including blindness. This podcast discusses the importance of proper lens hygiene and maintenance.

Risk-Informed Decision Making: Application to Technology Development Alternative Selection

Science.gov (United States)

Dezfuli, Homayoon; Maggio, Gaspare; Everett, Christopher

2010-01-01

NASA NPR 8000.4A, Agency Risk Management Procedural Requirements, defines risk management in terms of two complementary processes: Risk-informed Decision Making (RIDM) and Continuous Risk Management (CRM). The RIDM process is used to inform decision making by emphasizing proper use of risk analysis to make decisions that impact all mission execution domains (e.g., safety, technical, cost, and schedule) for program/projects and mission support organizations. The RIDM process supports the selection of an alternative prior to program commitment. The CRM process is used to manage risk associated with the implementation of the selected alternative. The two processes work together to foster proactive risk management at NASA. The Office of Safety and Mission Assurance at NASA Headquarters has developed a technical handbook to provide guidance for implementing the RIDM process in the context of NASA risk management and systems engineering. This paper summarizes the key concepts and procedures of the RIDM process as presented in the handbook, and also illustrates how the RIDM process can be applied to the selection of technology investments as NASA's new technology development programs are initiated.

What is the proper evaluation method: Some basic considerations

International Nuclear Information System (INIS)

Leeb, Helmut; Schnabel, Georg; Srdinko, Thomas

2014-01-01

Recent developments and applications demand for an extension of the energy range and the inclusion of reliable uncertainty information in nuclear data libraries. Due to the scarcity of neutron-induced reaction data beyond 20 MeV the extension of the energy range up to at least 150 MeV is not trivial because the corresponding nuclear data evaluations depend heavily on nuclear models and proper evaluation methods are still under discussion. Restricting to evaluation techniques based on Bayesian statistics the influence of the a priori knowledge on the final result of the evaluation is considered. The study clearly indicates the need to account properly for the deficiencies of the nuclear model. Concerning the covariance matrices it is argued that they depend not only on the model, but also on the method of generation and an additional consent is required for the comparison of different evaluations of the same data sets. (authors)

Radial velocities for the HIPPARCOS-Gaia Hundred-Thousand-Proper-Motion project

Science.gov (United States)

de Bruijne, J. H. J.; Eilers, A.-C.

2012-10-01

Context. The Hundred-Thousand-Proper-Motion (HTPM) project will determine the proper motions of ~113 500 stars using a ~23-year baseline. The proper motions will be based on space-based measurements exclusively, with the Hipparcos data, with epoch 1991.25, as first epoch and with the first intermediate-release Gaia astrometry, with epoch ~2014.5, as second epoch. The expected HTPM proper-motion standard errors are 30-190 μas yr-1, depending on stellar magnitude. Aims: Depending on the astrometric characteristics of an object, in particular its distance and velocity, its radial velocity can have a significant impact on the determination of its proper motion. The impact of this perspective acceleration is largest for fast-moving, nearby stars. Our goal is to determine, for each star in the Hipparcos catalogue, the radial-velocity standard error that is required to guarantee a negligible contribution of perspective acceleration to the HTPM proper-motion precision. Methods: We employ two evaluation criteria, both based on Monte-Carlo simulations, with which we determine which stars need to be spectroscopically (re-)measured. Both criteria take the Hipparcos measurement errors into account. The first criterion, the Gaussian criterion, is applicable to nearby stars. For distant stars, this criterion works but returns overly pessimistic results. We therefore use a second criterion, the robust criterion, which is equivalent to the Gaussian criterion for nearby stars but avoids biases for distant stars and/or objects without literature radial velocity. The robust criterion is hence our prefered choice for all stars, regardless of distance. Results: For each star in the Hipparcos catalogue, we determine the confidence level with which the available radial velocity and its standard error, taken from the XHIP compilation catalogue, are acceptable. We find that for 97 stars, the radial velocities available in the literature are insufficiently precise for a 68.27% confidence

Optimizing chain life in bucket elevators through proper design and elongation measurement

Energy Technology Data Exchange (ETDEWEB)

Luglio, J.J. [Rexnord, Inc., Milwaukee, WI (United States)

2001-04-01

Since down time in the bulk solids handling industry is so expensive, bucket elevators must operate with extreme reliability, and, of course, the cost per ton of material conveyed must be minimized. This means balancing initial costs, operating and maintenance costs as well as minimizing the inventory of parts required in order to insure reliability. The elevator must be designed properly for each application. It must also be operated and maintained properly. (orig.)

From art to applied science.

Science.gov (United States)

Schatzberg, Eric

2012-09-01

Before "applied science" and "technology" became keywords, the concept of art was central to discourse about material culture and its connections to natural knowledge. By the late nineteenth century, a new discourse of applied science had replaced the older discourse of art. This older discourse of art, especially as presented in Enlightenment encyclopedias, addressed the relationship between art and science in depth. But during the nineteenth century the concept of fine art gradually displaced the broader meanings of "art," thus undermining the utility of the term for discourse on the relationship between knowledge and practice. This narrowed meaning of "art" obscured key aspects of the industrial world. In effect, middle-class agents of industrialism, including "men of science," used the rhetoric of "applied science" and, later, "technology" to cement the exclusion of artisanal knowledge from the discourse of industrial modernity.

Technology management for environmentally sound and sustainable development

International Nuclear Information System (INIS)

Zaidi, S.M.J.

1992-01-01

With the evolutionary change in the production activities of human societies, the concept of development has also been changing. In the recent years the emphasis has been on the environmentally sound and sustainable development. The environmentally sound and sustainable development can be obtained through judicious use of technology. Technology as a resource transformer has emerged as the most important factor which can constitute to economic growth. But technology is not an independent and autonomous force, it is only an instrument which needs to be used carefully, properly and appropriately which necessitates technology management. (author)

Corrections to the Hipparcos proper motions in declination for 807 stars

Directory of Open Access Journals (Sweden)

Damljanović G.

2008-01-01

Full Text Available We used the data on latitude variations obtained from observations with 10 classical photographic zenith tubes (PZT in order to improve the Hipparcos proper motions in declinations µδ for 807 stars. Part of observing programmes, carried out during the last century for the purpose of studying the Earth's rotation, were realized by using PZT instruments. These observations were performed within in the intervals (tens of years much longer than that of the Hipparcos mission (less than 4 years. In addition, the annual number of observations for every PZT programme star is several hundreds on the average. Though the accuracy of the star coordinates in the Hipparcos Catalogue is by two orders of magnitude better than that of the star coordinates from the PZT observations, the large number of observations performed a much longer time interval makes it possible to correct the Hipparcos proper motions and to improve their accuracy with respect to the accuracy given in the Hipparcos Catalogue. Long term examinations of latitude and time variations were used to form the Earth Orientation Catalogue (EOC-2, aimed at a more accurate determination of positions and proper motions for the stars included. Our method of calculating the corrections of the proper motions in declination from the latitude variations is different from the method used in obtaining the EOC-2 Catalogue. Comparing the results we have established a good agreement between our µδ and the EOC-2 ones for the star sample used in the present paper.

Corrections to the Hipparcos Proper Motions in Declination for 807 Stars

Directory of Open Access Journals (Sweden)

Damljanović, G.

2008-12-01

Full Text Available We used the data on latitude variations obtained from observations with 10 classical photographic zenith tubes (PZT in order to improve the Hipparcos proper motions in declinations $mu_{delta} $ for 807 stars. Part of observing programmes, carried out during the last century for the purpose of studying the Earth's rotation, were realized by using PZT instruments. These observations were performed within in the intervals (tens of years much longer than that of the Hipparcos mission (less than 4 years. In addition, the annual number of observations for every PZT-programme star is several hundreds on the average. Though the accuracy of the star coordinates in the Hipparcos Catalogue is by two orders of magnitude better than that of the star coordinates from the PZT observations, the large number of observations performed a much longer time interval makes it possible to correct the Hipparcos proper motions and to improve their accuracy with respect to the accuracy given in the Hipparcos Catalogue. Long term examinations of latitude and time variations were used to form the Earth Orientation Catalogue (EOC-2, aimed at a more accurate determination of positions and proper motions for the stars included. Our method of calculating the corrections of the proper motions in declination from the latitude variations is different from the method used in obtaining the EOC-2 Catalogue. Comparing the results we have established a good agreement between our $mu_ {delta} $ and the EOC-2 ones for the star sample used in the present paper.

MEASURING THE UNDETECTABLE: PROPER MOTIONS AND PARALLAXES OF VERY FAINT SOURCES

International Nuclear Information System (INIS)

Lang, Dustin; Hogg, David W.; Jester, Sebastian; Rix, Hans-Walter

2009-01-01

The near future of astrophysics involves many large solid-angle, multi-epoch, multiband imaging surveys. These surveys will, at their faint limits, have data on a large number of sources that are too faint to be detected at any individual epoch. Here, we show that it is possible to measure in multi-epoch data not only the fluxes and positions, but also the parallaxes and proper motions of sources that are too faint to be detected at any individual epoch. The method involves fitting a model of a moving point source simultaneously to all imaging, taking account of the noise and point-spread function (PSF) in each image. By this method it is possible to measure the proper motion of a point source with an uncertainty close to the minimum possible uncertainty given the information in the data, which is limited by the PSF, the distribution of observation times (epochs), and the total signal-to-noise in the combined data. We demonstrate our technique on multi-epoch Sloan Digital Sky Survey (SDSS) imaging of the SDSS Southern Stripe (SDSSSS). We show that with our new technique we can use proper motions to distinguish very red brown dwarfs from very high-redshift quasars in these SDSS data, for objects that are inaccessible to traditional techniques, and with better fidelity than by multiband imaging alone. We rediscover all 10 known brown dwarfs in our sample and present nine new candidate brown dwarfs, identified on the basis of significant proper motion.

Possible Relativistic Definitions of Parallax, Proper Motion and Radial Velocity

National Research Council Canada - National Science Library

Klioner, S

2000-01-01

.... In this paper, the authors briefly describe a relativistic model of space-based optical positional observations valid at a high level of accuracy, and suggest definitions of parallax, proper motion...

Non-Lethal Weapons: A Technology Gap or Lack or Available Systems, Training, and Proper Application

Science.gov (United States)

2016-06-10

102-104. 31 Ibid., 103-104. 32 Michael Wines , “The Aftermath in Moscow: Post-Mortem in Moscow; Russia Names Drug in Raid, Defending Use,” New York...during the past three decades have increased awareness of the benefit of non- lethal options, but increased advocacy within the services has not led to a...during the execution of suitable missions that could benefit from less than lethal technology. Research and Development Once the directorate

Proper balance of omega-3 and omega-6 fatty acid supplements with topical cyclosporine attenuated contact lens-related dry eye syndrome.

Science.gov (United States)

Wang, Ling; Chen, Xi; Hao, Jingfang; Yang, Lu

2016-12-01

Essential fatty acids had been applied in the treatment of dry eye syndrome (DES), but the effects of different combinations of fatty acids have not been investigated. 360 long-term contact lens wearers were included in this double-blinded study. Omega-3 and omega-6 fatty acids were combined in different ratios and supplied to the participants that were randomly divided into six groups, and the effects of different essential fatty acids mixture on DES with or without topical cyclosporine were investigated. More than half of long-term contact lens wearers suffered from DES, which were found to be attenuated by oral supplement of properly balanced O3FA and O6FA fatty acid. The topical cyclosporine treatment considerably inhibited the production of cytokines compared to the cyclosporine negative groups, which further relieved DES. Proper balance of omega-3 and omega-6 fatty acid combination significantly alleviated contact lens-related DES.

Wireless Sensor for Measuring Pump Efficiency: Small Business Voucher Project with KCF Technologies

Energy Technology Data Exchange (ETDEWEB)

Gehl, Anthony C [ORNL; Liu, Xiaobing [ORNL; Koopman, Gary [KCF Technologies; Fugate, David L [ORNL

2017-01-23

This document is to fulfill the final report requirements for the Small Business Voucher (SBV) CRADA project with ORNL and KCF Technologies (CRADA/NFE-16-06133). Pumping systems account for nearly 20% of the world’s electrical energy demand and range from 25-50% of the energy usage in many industrial and building power plants. The energy cost is the largest element in the total cost of owning a pump (~40%). In response to a recent DOE mandate for improved pump efficiency pump manufacturers are preparing for the changes that the impending regulations will bring, including design improvements. This mandate also establishes a need for new low cost pump efficiency measurement systems. The standard industry definition of pump efficiency is the mechanical water horsepower delivered divided by the electrical horsepower input to the motor. KCF Technologies has developed a new sensor measurement technique to estimate fluid pump efficiency using a thermodynamic approach. KCF Technologies applied for a SBV grant with ORNL as the research partner. KCF needed a research partner with the proper facilities to demonstrate the efficacy of its wireless sensor unit for measuring pump efficiency. The ORNL Building Technologies Research and Integration Center (BTRIC) test resources were used to test and demonstrate the successful measurement of pump efficiency with the KCF sensor technology. KCF is now working on next steps to commercialize this sensing technology.

Technology Acceptance of Augmented Reality and Wearable Technologies

NARCIS (Netherlands)

Wild, Fridolin; Klemke, Roland; Lefrere, Paul; Fominykh, Mikhail; Kuula, Timo

2017-01-01

Augmented Reality and Wearables are the recent media and computing technologies, similar, but different from established technologies, even mobile computing and virtual reality. Numerous proposals for measuring technology acceptance exist, but have not been applied, nor fine-tuned to such

Proper Lens Care (A Cup of Health with CDC)

Centers for Disease Control (CDC) Podcasts

Wearing contact lenses is a convenient way to improve vision without having to wear glasses. But unlike glasses, improper care and maintenance of lenses can result in severe eye problems, including blindness. In this podcast, Dr. Jennifer Cope discusses the importance of proper lens hygiene and maintenance.

Proper Motion and Secular Variations of Keplerian Orbital Elements

Directory of Open Access Journals (Sweden)

Alexey G. Butkevich

2018-05-01

Full Text Available High-precision observations require accurate modeling of secular changes in the orbital elements in order to extrapolate measurements over long time intervals, and to detect deviation from pure Keplerian motion caused, for example, by other bodies or relativistic effects. We consider the evolution of the Keplerian elements resulting from the gradual change of the apparent orbit orientation due to proper motion. We present rigorous formulae for the transformation of the orbit inclination, longitude of the ascending node and argument of the pericenter from one epoch to another, assuming uniform stellar motion and taking radial velocity into account. An approximate treatment, accurate to the second-order terms in time, is also given. The proper motion effects may be significant for long-period transiting planets. These theoretical results are applicable to the modeling of planetary transits and precise Doppler measurements as well as analysis of pulsar and eclipsing binary timing observations.

Technological Minimalism: A Cost-Effective Alternative for Course Design and Development.

Science.gov (United States)

Lorenzo, George

2001-01-01

Discusses the use of minimum levels of technology, or technological minimalism, for Web-based multimedia course content. Highlights include cost effectiveness; problems with video streaming, the use of XML for Web pages, and Flash and Java applets; listservs instead of proprietary software; and proper faculty training. (LRW)

Precedent Proper Names in Informal Oikonymy

Directory of Open Access Journals (Sweden)

Maria V. Akhmetova

2013-06-01

Full Text Available The paper deals with the Russian language informal city names (oikonyms motivated by other toponyms (with reference to Russia and the CIS. The author shows that the motivating proper name can replace the city name (e. g. Глазго < Glasgow ‘Glazov’ or contaminate with it (e. g. Экибостон < Ekibastuz + Boston, the “alien” onym being attracted to construct an informal oikonym due to its phonetic similarity or, on occasion, due to an affinity, either real or imaginary, between the two settlements. The author argues that the phonetic motivation is more characteristic for the modern urban tradition, than for popular dialects.

A properly adjusted forage harvester can save time and money

Science.gov (United States)

A properly adjusted forage harvester can save fuel and increase the realizable milk per ton of your silage. This article details the adjustments necessary to minimize energy while maximizing productivity and forage quality....

Evaluation of technology modifications required to apply clean coal technologies in Russian utilities. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-01

The report describes the following: overview of the Russian power industry; electric power equipment of Russia; power industry development forecast for Russia; clean coal technology demonstration program of the US Department of Energy; reduction of coal TPS (thermal power station) environmental impacts in Russia; and base options of advanced coal thermal power plants. Terms of the application of clean coal technology at Russian TPS are discussed in the Conclusions.

32 CFR 842.63 - Who are not proper claimants.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Who are not proper claimants. 842.63 Section 842.63 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE CLAIMS AND... accompanying US military and US national civilian employees. (c) Foreign military personnel suffering property...

Small Orbital Stereo Tracking Camera Technology Development

Science.gov (United States)

Gagliano, L.; Bryan, T.; MacLeod, T.

On-Orbit Small Debris Tracking and Characterization is a technical gap in the current National Space Situational Awareness necessary to safeguard orbital assets and crew. This poses a major risk of MOD damage to ISS and Exploration vehicles. In 2015 this technology was added to NASAs Office of Chief Technologist roadmap. For missions flying in or assembled in or staging from LEO, the physical threat to vehicle and crew is needed in order to properly design the proper level of MOD impact shielding and proper mission design restrictions. Need to verify debris flux and size population versus ground RADAR tracking. Use of ISS for In-Situ Orbital Debris Tracking development provides attitude, power, data and orbital access without a dedicated spacecraft or restricted operations on-board a host vehicle as a secondary payload. Sensor Applicable to in-situ measuring orbital debris in flux and population in other orbits or on other vehicles. Could enhance safety on and around ISS. Some technologies extensible to monitoring of extraterrestrial debris as well To help accomplish this, new technologies must be developed quickly. The Small Orbital Stereo Tracking Camera is one such up and coming technology. It consists of flying a pair of intensified megapixel telephoto cameras to evaluate Orbital Debris (OD) monitoring in proximity of International Space Station. It will demonstrate on-orbit optical tracking (in situ) of various sized objects versus ground RADAR tracking and small OD models. The cameras are based on Flight Proven Advanced Video Guidance Sensor pixel to spot algorithms (Orbital Express) and military targeting cameras. And by using twin cameras we can provide Stereo images for ranging & mission redundancy. When pointed into the orbital velocity vector (RAM), objects approaching or near the stereo camera set can be differentiated from the stars moving upward in background.

Advances in elementary particle physics with applied superconductivity. Contribution of superconducting technology to CERN large hadron collider accelerator

International Nuclear Information System (INIS)

Yamamoto, Akira

2011-01-01

The construction of the Large Hadron Collider (LHC) was started in 1994 and completed in 2008. The LHC consists of more than seven thousand superconducting magnets and cavities, which play an essential role in elementary particle physics and its energy frontier. Since 2010, physics experiments at the new energy frontier have been carried out to investigate the history and elementary particle phenomena in the early universe. The superconducting technology applied in the energy frontier physics experiments is briefly introduced. (author)

A multi-layered approach to product architecture modeling: Applied to technology prototypes

DEFF Research Database (Denmark)

Ravn, Poul Martin; Guðlaugsson, Tómas Vignir; Mortensen, Niels Henrik

2016-01-01

Companies that wish to include novel technology in the product portfolio may need to test and evaluate the technology with the use of prototypes to learn its benefits. Without clear knowledge of the benefits of the technology to the products in the portfolio, in the form of increased performance...... and managing technology prototypes and can be correlated with improvements in the team collaboration, communication, and development performance......., added functions, or material savings, the prototype development can be hard to manage. In this article, two contributions are made. The first adds to the vocabulary of prototyping, defining technology prototype, a prototype used for testing a novel technology in the context of an existing product...

Recent Developments in Optical Detection Technologies in Lab-on-a-Chip Devices for Biosensing Applications

Directory of Open Access Journals (Sweden)

Nuno Miguel Matos Pires

2014-08-01

Full Text Available The field of microfluidics has yet to develop practical devices that provide real clinical value. One of the main reasons for this is the difficulty in realizing low-cost, sensitive, reproducible, and portable analyte detection microfluidic systems. Previous research has addressed two main approaches for the detection technologies in lab-on-a-chip devices: (a study of the compatibility of conventional instrumentation with microfluidic structures, and (b integration of innovative sensors contained within the microfluidic system. Despite the recent advances in electrochemical and mechanical based sensors, their drawbacks pose important challenges to their application in disposable microfluidic devices. Instead, optical detection remains an attractive solution for lab-on-a-chip devices, because of the ubiquity of the optical methods in the laboratory. Besides, robust and cost-effective devices for use in the field can be realized by integrating proper optical detection technologies on chips. This review examines the recent developments in detection technologies applied to microfluidic biosensors, especially addressing several optical methods, including fluorescence, chemiluminescence, absorbance and surface plasmon resonance.

Locale-Specific Categorization of IT Projects for Proper Project Management

Directory of Open Access Journals (Sweden)

Muhammad Nasir

2015-12-01

Full Text Available In this paper we aim to show that not only are the project management techniques important for small-scale projects, but following proper project management techniques is one of the most important requirements. However, there come slight variations in implementing project management techniques in small projects as compared with larger projects. Therefore, proper categorization of projects holds the key to success in many situations. Our paper will show that categorization of a project as small-scale or large-scale should always be locale specific. In this regards, we develop a criteria and evaluate how the projects are categorized as small-scale and large-scale in different parts of the world with focus on IT projects. This research concludes that some methods cannot be used for projects of different scales.

Educating Future Engineers and the Image of Technology : Applying the Philosophy of Technology to Engineering Education

NARCIS (Netherlands)

Ghaemi Nia, M.M.

2017-01-01

This thesis deals with the matter of making reforms in engineering education, and it highlights the significance of delivering a more comprehensive image of technology and its different aspects in the course of training students about technology and engineering. The innovative contribution of the

Demographic factors and retrieval of object and proper names after age 70.

Directory of Open Access Journals (Sweden)

Gitit Kavé

Full Text Available This research aimed to investigate whether demographic factors are similarly related to retrieval of object and proper names.The sample included 5,907 individuals above age 70 who participated in the Health and Retirement Study between 2004 and 2012. Participants were asked to name two objects as well as the US President and Vice President. Latent growth curve models examined the associations of age, education, and self-rated health with baseline levels and change trajectories in retrieval.Age and education were more strongly related to retrieval of proper names than to retrieval of object names, both for baseline scores and for change trajectory. Similar effects of self-rated health emerged for both types of stimuli.The results show that examining object names and proper names together as indication of cognitive status in the HRS might overlook important differences between the two types of stimuli, in both baseline performance and longitudinal change.

Modal analysis of fluid flows using variants of proper orthogonal decomposition

Science.gov (United States)

Rowley, Clarence; Dawson, Scott

2017-11-01

This talk gives an overview of several methods for analyzing fluid flows, based on variants of proper orthogonal decomposition. These methods may be used to determine simplified, approximate models that capture the essential features of these flows, in order to better understand the dominant physical mechanisms, and potentially to develop appropriate strategies for model-based flow control. We discuss balanced proper orthogonal decomposition as an approximation of balanced truncation, and explain connections with system identification methods such as the eigensystem realization algorithm. We demonstrate the methods on several canonical examples, including a linearized channel flow and the flow past a circular cylinder. Supported by AFOSR, Grant FA9550-14-1-0289.

Fast algorithms for finding proper strategies in game trees

DEFF Research Database (Denmark)

Miltersen, Peter Bro; Sørensen, Troels Bjerre

2008-01-01

We show how to find a normal form proper equilibrium in behavior strategies of a given two-player zero-sum extensive form game with imperfect information but perfect recall. Our algorithm solves a finite sequence of linear programs and runs in polynomial time. For the case of a perfect informatio...

Improved proper name recall in aging after electrical stimulation of the anterior temporal lobes

Directory of Open Access Journals (Sweden)

Lars A Ross

2011-10-01

Full Text Available Evidence from neuroimaging and neuropsychology suggests that portions of the anterior temporal lobes play a critical role in proper name retrieval. We previously found that anodal transcranial direct current stimulation (tDCS to the anterior temporal lobes improved retrieval of proper names in young adult. Here we extend that finding to older adults who tend to experience greater proper-naming deficits than young adults. The task was to look at pictures of famous faces or landmarks and verbally recall the associated proper name. Our results show a numerical improvement in face naming after left or right anterior temporal lobe stimulation, but a statistically significant effect only after left-lateralized stimulation. The magnitude of the enhancing effect was similar in older and younger adults but the lateralization of the effect differed depending on age. These results provide evidence that tDCS may be a useful tool for the neurorehabilitation of cognitive function in healthy and pathological cognitive decline.

Proper Management Of Irrigation Water And Nitrogen Fertilizer To Improve Spinach Yield And Reserve Environment Using 15N Tracer Technique

International Nuclear Information System (INIS)

GADALLA, A.M.; GALAL, Y.G.M.; ISMAIL, M.M.; EL DEGWY, S.A.; HAMDY, A.; HAMED, L.M.

2010-01-01

The effect of water regime and N-fertilizer application rate and modality of its application were studied by the aim of identifying the most proper and effective combination of the above studied variables that provide a satisfactory spinach yield as well as to minimize the rational use of chemical nitrogen fertilizers to save the surrounding environment and to achieve a good water saving. The results indicated that reasonable production of spinach crop could be achieved by using 75% of the recommended rate of nitrogen fertilizer combined with 80% of the required water. It means that 20% of the required water could be saved as well as 25% of the required quantity of N-fertilizer. Similarly, the splitting of N-fertilizer into two equal doses prevented the excess of nitrate to be moved to the underground water lowering its concentration in the blades and plant leaves. Drip irrigation system accompanied with proper water scheduling regime and good fertilizer application practices is considered as a useful management practice that could be applied to improve the sandy soil productivity.

Towards the Proper Integration of Extra-Functional Requirements

OpenAIRE

Elke Hochmuller

1999-01-01

In spite of the many achievements in software engineering, proper treatment of extra-functional requirements (also known as non-functional requirements) within the software development process is still a challenge to our discipline. The application of functionality-biased software development methodologies can lead to major contradictions in the joint modelling of functional and extra-functional requirements. Based on a thorough discussion on the nature of extra-functional requirements as wel...

Lactic Acid Bacteria Selection for Biopreservation as a Part of Hurdle Technology Approach Applied on Seafood

Directory of Open Access Journals (Sweden)

Norman Wiernasz

2017-05-01

Full Text Available As fragile food commodities, microbial, and organoleptic qualities of fishery and seafood can quickly deteriorate. In this context, microbial quality and security improvement during the whole food processing chain (from catch to plate, using hurdle technology, a combination of mild preserving technologies such as biopreservation, modified atmosphere packaging, and superchilling, are of great interest. As natural flora and antimicrobial metabolites producers, lactic acid bacteria (LAB are commonly studied for food biopreservation. Thirty-five LAB known to possess interesting antimicrobial activity were selected for their potential application as bioprotective agents as a part of hurdle technology applied to fishery products. The selection approach was based on seven criteria including antimicrobial activity, alteration potential, tolerance to chitosan coating, and superchilling process, cross inhibition, biogenic amines production (histamine, tyramine, and antibiotics resistance. Antimicrobial activity was assessed against six common spoiling bacteria in fishery products (Shewanella baltica, Photobacterium phosphoreum, Brochothrix thermosphacta, Lactobacillus sakei, Hafnia alvei, Serratia proteamaculans and one pathogenic bacterium (Listeria monocytogenes in co-culture inhibitory assays miniaturized in 96-well microtiter plates. Antimicrobial activity and spoilage evaluation, both performed in cod and salmon juice, highlighted the existence of sensory signatures and inhibition profiles, which seem to be species related. Finally, six LAB with no unusual antibiotics resistance profile nor histamine production ability were selected as bioprotective agents for further in situ inhibitory assays in cod and salmon based products, alone or in combination with other hurdles (chitosan, modified atmosphere packing, and superchilling.

Machine safety: proper safeguarding techniques.

Science.gov (United States)

Martin, K J

1992-06-01

1. OSHA mandates certain safeguarding of machinery to prevent accidents and protect machine operators. OSHA specifies moving parts that must be guarded and sets criteria for the guards. 2. A 1989 OSHA standard for lockout/tagout requires locking the energy source during maintenance, periodically inspecting for power transmission, and training maintenance workers. 3. In an amputation emergency, first aid for cardiopulmonary resuscitation, shock, and bleeding are the first considerations. The amputated part should be wrapped in moist gauze, placed in a sealed plastic bag, and placed in a container of 50% water and 50% ice for transport. 4. The role of the occupational health nurse in machine safety is to conduct worksite analyses to identify proper safeguarding and to communicate deficiencies to appropriate personnel; to train workers in safe work practices and observe compliance in the use of machine guards; to provide care to workers injured by machines; and to reinforce safe work practices among machine operators.

Mechanics for materials and technologies

CERN Document Server

Goldstein, Robert; Murashkin, Evgenii

2017-01-01

This book shows impressively how complex mathematical modeling of materials can be applied to technological problems. Top-class researchers present the theoretical approaches in modern mechanics and apply them to real-world problems in solid mechanics, creep, plasticity, fracture, impact, and friction. They show how they can be applied to technological challenges in various fields like aerospace technology, biological sciences and modern engineering materials.

THE PROBLEM OF PROPER CARGO SECURING IN ROAD TRANSPORT – CASE STUDY

Directory of Open Access Journals (Sweden)

Maria CIEŚLA

2013-12-01

Full Text Available This paper presents the problem of improper security of cargo in trucks as the cause of about 25% of the accidents that takes place in road transport. Attention was drawn to aspects of legal liability for errors resulting from incorrect load securing according to polish law. Article was enriched with practical examples illustrating the effects of improper cargo securing on transport unit and shows how it had to be prepared properly. When planning the proper transport protection of metal sheets rolled both calculation methods and computer applications were used.

NATIONAL EXPERIENCES REGARDING CORPORATE GOVERNANCE PROPER PRACTICE CODES

Directory of Open Access Journals (Sweden)

Durgheu Liliana

2010-12-01

Full Text Available This paper is about the principles of proper governance codes, which even tough have blossomed in all parts of the world for more than a decade, the degree in which companies adopt the codes vary in different countries, and the decision to adopt a certain code does not automatically guarranty efficient corporate governance. The paper trys to identify the mechanisms needed for implementing the codes and that will lead to higher efficiency.

Taxonomic and Thematic Organisation of Proper Name Conceptual Knowledge

Directory of Open Access Journals (Sweden)

Sebastian J. Crutch

2011-01-01

Full Text Available We report the investigation of the organisation of proper names in two aphasic patients (NBC and FBI. The performance of both patients on spoken word to written word matching tasks was inconsistent, affected by presentation rate and semantic relatedness of the competing responses, all hallmarks of a refractory semantic access dysphasia. In a series of experiments we explored the semantic relatedness effects within their proper name vocabulary, including brand names and person names. First we demonstrated the interaction between very fine grain organisation and personal experience, with one patient with a special interest in the cinema demonstrating higher error rates when identifying the names of actors working in a similar film genre (e.g. action movies: Arnold Schwarzenegger, Bruce Willis, Sylvester Stallone, Mel Gibson than those working in different genres (e.g. Arnold Schwarzenegger, Gregory Peck, Robin Williams, Gene Kelly. Second we compared directly two potential principles of semantic organisation – taxonomic and thematic. Furthermore we considered these principles of organisation in the context of the individuals' personal knowledge base. We selected topics matching the interests and experience of each patient, namely cinema and literature (NBC and naval history (FBI. The stimulus items were arranged in taxonomic arrays (e.g. Jane Austen, Emily Bronte, Agatha Christie, thematic arrays (e.g. Jane Austen, Pride and Prejudice, Mr Darcy, and unrelated arrays (e.g. Jane Austen, Wuthering Heights, Hercule Poirot. We documented that different patterns of taxonomic and thematic organisation were constrained by whether the individual has limited knowledge, moderate knowledge or detailed knowledge of a particular vocabulary. It is suggested that moderate proper name knowledge is primarily organised by taxonomy whereas extensive experience results in a more detailed knowledge base in which theme is a powerful organising principle.

Taxonomic and thematic organisation of proper name conceptual knowledge.

Science.gov (United States)

Crutch, Sebastian J; Warrington, Elizabeth K

2011-01-01

We report the investigation of the organisation of proper names in two aphasic patients (NBC and FBI). The performance of both patients on spoken word to written word matching tasks was inconsistent, affected by presentation rate and semantic relatedness of the competing responses, all hallmarks of a refractory semantic access dysphasia. In a series of experiments we explored the semantic relatedness effects within their proper name vocabulary, including brand names and person names. First we demonstrated the interaction between very fine grain organisation and personal experience, with one patient with a special interest in the cinema demonstrating higher error rates when identifying the names of actors working in a similar film genre (e.g., action movies: Arnold Schwarzenegger, Bruce Willis, Sylvester Stallone, Mel Gibson) than those working in different genres (e.g., Arnold Schwarzenegger, Gregory Peck, Robin Williams, Gene Kelly). Second we compared directly two potential principles of semantic organisation - taxonomic and thematic. Furthermore we considered these principles of organisation in the context of the individuals' personal knowledge base. We selected topics matching the interests and experience of each patient, namely cinema and literature (NBC) and naval history (FBI). The stimulus items were arranged in taxonomic arrays (e.g., Jane Austen, Emily Bronte, Agatha Christie), thematic arrays (e.g., Jane Austen, Pride and Prejudice, Mr Darcy), and unrelated arrays (e.g., Jane Austen, Wuthering Heights, Hercule Poirot). We documented that different patterns of taxonomic and thematic organisation were constrained by whether the individual has limited knowledge, moderate knowledge or detailed knowledge of a particular vocabulary. It is suggested that moderate proper name knowledge is primarily organised by taxonomy whereas extensive experience results in a more detailed knowledge base in which theme is a powerful organising principle.

Applying Nano technology to Human Health: Revolution in Biomedical Sciences

International Nuclear Information System (INIS)

Shrivastava, S.; Dash, D.

2009-01-01

Recent research on bio systems at the nano scale has created one of the most dynamic science and technology domains at the confluence of physical sciences, molecular engineering, biology, biotechnology, and medicine. This domain includes better understanding of living and thinking systems, revolutionary biotechnology processes, synthesis of new drugs and their targeted delivery, regenerative medicine, necrophorum engineering, and developing a sustainable environment. Nano bio systems research is a priority in many countries and its relevance within nano technology is expected to increase in the future. The realisation that the nano scale has certain properties needed to solve important medical challenges and cater to unmet medical needs is driving nano medical research. The present review explores the significance of nano science and latest nano technologies for human health. Addressing the associated opportunities, the review also suggests how to manage far-reaching developments in these areas

Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1995. 1. Summary; 1995 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 1. Gaiyohen

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

This paper summarizes the achievements in the development of a technology to apply human senses to measurements in fiscal 1995. The first term has developed mainly the technology to measure sensual information, and the second term is performing development with the target placed on structuring a measure to measure and evaluate the effects of different physiological burdens, environments and products on human being, based on the measuring technology developed in the first term. The second term plans to develop the following items: a technology to use human senses as indexes aimed at making measures for health, safety, comfort, and convenience which are important for human life; studies on applied cases to discuss effectiveness of the human sense indexing technology by applying it to specific products, working places, and living environments; an evaluation simulator technology to measure and evaluate quantitatively and objectively in place of human being the comfort and compatibility therewith; and development is made on a human sense database model that compiles different data obtained in indexing the human senses. The paper also describes achievements of the development. (NEDO)

Multiple technologies applied to characterization of the porosity and permeability of the Biscayne aquifer, Florida

Science.gov (United States)

Cunningham, K.J.; Sukop, M.C.

2011-01-01

Research is needed to determine how seepage-control actions planned by the Comprehensive Everglades Restoration Plan (CERP) will affect recharge, groundwater flow, and discharge within the dual-porosity karstic Biscayne aquifer where it extends eastward from the Everglades to Biscayne Bay. A key issue is whether the plan can be accomplished without causing urban flooding in adjacent populated areas and diminishing coastal freshwater flow needed in the restoration of the ecologic systems. Predictive simulation of groundwater flow is a prudent approach to understanding hydrologic change and potential ecologic impacts. A fundamental problem to simulation of karst groundwater flow is how best to represent aquifer heterogeneity. Currently, U.S. Geological Survey (USGS) researchers and academic partners are applying multiple innovative technologies to characterize the spatial distribution of porosity and permeability within the Biscayne aquifer.

Integrating technology into radiologic science education.

Science.gov (United States)

Wertz, Christopher Ira; Hobbs, Dan L; Mickelsen, Wendy

2014-01-01

To review the existing literature pertaining to the current learning technologies available in radiologic science education and how to implement those technologies. Only articles from peer-reviewed journals and scholarly reports were used in the research for this review. The material was further restricted to those articles that emphasized using new learning technologies in education, with a focus on radiologic science education. Teaching in higher education is shifting from a traditional classroom-based lecture format to one that incorporates new technologies that allow for more varied and diverse educational models. Radiologic technology educators must adapt traditional education delivery methods to incorporate current technologies. Doing so will help engage the modern student in education in ways in which they are already familiar. As students' learning methods change, so must the methods of educational delivery. The use of new technologies has profound implications for education. If implemented properly, these technologies can be effective tools to help educators.

PROPER MOTIONS OF YOUNG STELLAR OUTFLOWS IN THE MID-INFRARED WITH SPITZER (IRAC). I. THE NGC 1333 REGION

International Nuclear Information System (INIS)

Raga, A. C.; Noriega-Crespo, A.; Carey, S. J.; Arce, H. G.

2013-01-01

We use two 4.5 μm Spitzer (IRAC) maps of the NGC 1333 region taken over a ∼7 yr interval to determine proper motions of its associated outflows. This is a first successful attempt at obtaining proper motions of stellars' outflow from Spitzer observations. For the outflow formed by the Herbig-Haro objects HH7, 8, and 10, we find proper motions of ∼9-13 km s –1 , which are consistent with previously determined optical proper motions of these objects. We determine proper motions for a total of eight outflows, ranging from ∼10 to 100 km s –1 . The derived proper motions show that out of these eight outflows, three have tangential velocities ≤20 km s –1 . This result shows that a large fraction of the observed outflows have low intrinsic velocities and that the low proper motions are not merely a projection effect.

Predicting Factors of Worker Behavior for Proper Working Posture Based on Planed Behavior Theory

Directory of Open Access Journals (Sweden)

E Mohammadi Zeydi

2008-12-01

Introduction & Objective: Injuries resulting from ignoring proper working posture especially in employees who sitting at workplace for more than of working hours are costly, and create significant pain and discomfort. Decreasing of these injuries is most effectively accomplished through the application of ergonomic design principles. Sometimes, however, barriers (technical and economic preclude ergonomic improvement and, consequently, some organizations rely on the use of proper sitting techniques and maintaining proper working posture as a major control strategy during workday. The problem, however, is that these process performing is inconsistent and managers have a difficult time motivating use of these techniques. The main aim of this study was to understand the factors driving proper working posture among employees. Materials & Methods: This study used the theory of planned behavior to predict upright working posture maintenance among 222 of assembling, machinery and printing line’s employees at a Qazvin Alborz industrial town manufacturing organization. Structural equation modeling, explanatory and confirmatory factor analysis were employed to analyze relationships among constructs. Results: Results revealed that attitude (p< 0.05, β= 0.53 and intention (p< 0.05, β= 0.46 were the strongest predictors of proper working posture maintenance behavior. Perceived behavior control, to a lesser degree, were also important influences on intention (p< 0.05, β= 0.34 and behavior (p< 0.05, β= 0.28. Subjective norms did not surface as effective direct predictors of upright working posture maintenance, but did affect behavior and intent via mediating factors (attitudes subjective norms and perceived behavioral control. Finally, the TPB was supported as an effective model explaining upright working posture maintenance, and had potential application for many other safety-related behaviors. Conclusion: results of this study emphasis on considering factors such as

Science, Technology and Social Change Course's Effects on Technological Literacy Levels of Social Studies Pre-Service Teachers

Science.gov (United States)

Yigit, E. Ozlem

2013-01-01

Social studies curricula are required in order to prepare to educate children who continue to learn after their formal training, and it is vital that teachers receive an education properly. In Social Studies Education Departments of Education Faculties Science, Technology and Social Change course is convenient to this aim and it contributes to…

Framework for the quality assurance of 'omics technologies considering GLP requirements.

Science.gov (United States)

Kauffmann, Hans-Martin; Kamp, Hennicke; Fuchs, Regine; Chorley, Brian N; Deferme, Lize; Ebbels, Timothy; Hackermüller, Jörg; Perdichizzi, Stefania; Poole, Alan; Sauer, Ursula G; Tollefsen, Knut E; Tralau, Tewes; Yauk, Carole; van Ravenzwaay, Ben

2017-12-01

'Omics technologies are gaining importance to support regulatory toxicity studies. Prerequisites for performing 'omics studies considering GLP principles were discussed at the European Centre for Ecotoxicology and Toxicology of Chemicals (ECETOC) Workshop Applying 'omics technologies in Chemical Risk Assessment. A GLP environment comprises a standard operating procedure system, proper pre-planning and documentation, and inspections of independent quality assurance staff. To prevent uncontrolled data changes, the raw data obtained in the respective 'omics data recording systems have to be specifically defined. Further requirements include transparent and reproducible data processing steps, and safe data storage and archiving procedures. The software for data recording and processing should be validated, and data changes should be traceable or disabled. GLP-compliant quality assurance of 'omics technologies appears feasible for many GLP requirements. However, challenges include (i) defining, storing, and archiving the raw data; (ii) transparent descriptions of data processing steps; (iii) software validation; and (iv) ensuring complete reproducibility of final results with respect to raw data. Nevertheless, 'omics studies can be supported by quality measures (e.g., GLP principles) to ensure quality control, reproducibility and traceability of experiments. This enables regulators to use 'omics data in a fit-for-purpose context, which enhances their applicability for risk assessment. Copyright © 2017 Elsevier Inc. All rights reserved.

A comparative study on PET and SPECT image formation systems for a proper scanner choice in a considered PET center

International Nuclear Information System (INIS)

Santos, G.R. dos; Oliveira, A. de; Oliveira, C.L. de

2001-01-01

Full text: In the last twenty years, the conjunction of technology and research had provided exceptional conditions for improvements on the quality of life, specially on nuclear medicine. In this area, the developed technology is being applied, making available better diagnoses and therapy to a variety of diseases. Since then the short-lived radionuclides were available only in the large physics research centers. The increasing clinical applications have led to the rapid rise in the number of compact cyclotrons throughout the world. All medical cyclotrons currently are suitable for sustaining programs for PET research and clinical application. To date, up to 122 medical cyclotrons have been established worldwide, and Brazil is about to install a new dedicated cyclotron (RDS111 from CTI), to its first PET Center, in Rio de Janeiro. Also the number of scanners worldwide has increased, mainly those based on the positrons emission and annihilation. The better result gotten in the final contrast of the object imposes a comparative study and analysis of the image formation process, either in a system based on a Single Photon Emission Computerized Tomography (SPECT), as well as on Positron Emission Tomography (PET.) This comparative study should at least follow same increasing rates of the new devices with technological advances. That kind of study can be helpful on the decision of what type of scan should be the proper one, to a PET Center, on a specific region. Obviously, many other parameters are involved in that decision, and this discussion and analyses are the main subject of the present work. The objective is to make available a realistic comparative scenario. Many of the new devices have been introduced making progresses. As an example, in the new PET scanners, the reduction of examination time, and the remarkable improvement on the diagnoses based on images. As a consequence, we have a broadening on application, better performance, and making possible the

Developing digital technologies for university mathematics by applying participatory design methods

DEFF Research Database (Denmark)

Triantafyllou, Eva; Timcenko, Olga

2013-01-01

This paper presents our research efforts to develop digital technologies for undergraduate university mathematics. We employ participatory design methods in order to involve teachers and students in the design of such technologies. The results of the first round of our design are included...

Technology Staff-Development and Support Programs: Applying Abraham Maslow's Hierarchy of Needs.

Science.gov (United States)

Bailey, Gerald D.; Pownell, David

1998-01-01

Presents Abraham Maslow's hierarchy of needs (physiological, safety, belonging, esteem, self-actualization) as a model for developing technology training and support for teachers, identifies basic technology-related needs that must be met before higher levels of technology integration can be achieved, and offers seven implications to help…

Technology Catalogue

International Nuclear Information System (INIS)

1994-02-01

The Department of Energy's Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM's Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM's Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department's clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD's applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina)

Rationale, design features, and baseline characteristics: The Heart Institute of Japan-PRoper level of lipid lOwering with Pitavastatin and Ezetimibe in acute coRonary syndrome (HIJ-PROPER).

Science.gov (United States)

Kawada-Watanabe, Erisa; Ogawa, Hiroshi; Koyanagi, Ryo; Arashi, Hiroyuki; Yamaguchi, Junichi; Matsui, Kunihiko; Hagiwara, Nobuhisa

2017-03-01

In contrast to current guidelines in Western countries, moderate reduction of low-density lipoprotein cholesterol (LDL-C) is recommended for Japanese patients with atherosclerotic cardiovascular disease and dyslipidemia even in secondary prevention. HIJ-PROPER (Heart Institute of Japan-PRoper level of lipid lOwering with Pitavastatin and Ezetimibe in acute coRonary syndrome) is a prospective, randomized, open-label, blinded endpoint multicenter trial designed to assess whether closely controlled LDL-C lowering with a standard statin dose plus ezetimibe, targeting LDL-C of acute coronary syndrome (ACS) and dyslipidemia. We recruited patients with ACS and dyslipidemia who had undergone coronary angiography. Participants are randomly allocated to either intensive LDL-C lowering treatment (target LDL-C of acute MI in 61.5%. This study is expected to report its findings in August 2016. HIJ-PROPER will determine whether targeting LDL-C of <70mg/dL with pitavastatin plus ezetimibe can improve cardiovascular outcomes in Japanese patients with ACS and dyslipidemia in comparison to targeting LDL-C of 90-100mg/dL with standard pitavastatin monotherapy. UMIN000002742. Copyright © 2016 Japanese College of Cardiology. Published by Elsevier Ltd. All rights reserved.

Sharing Year 2000 Testing Information on DOD Information Technology Systems

National Research Council Canada - National Science Library

1998-01-01

The audit objective was to determine whether planning for year 2000 testing is adequate to ensure that mission critical DoD information technology systems will continue to operate properly after the year 2000...

E-detailing: information technology applied to pharmaceutical detailing.

Science.gov (United States)

Montoya, Isaac D

2008-11-01

E-detailing can be best described as the use of information technology in the field of pharmaceutical detailing. It is becoming highly popular among pharmaceutical companies because it maximizes the time of the sales force, cuts down the cost of detailing and increases physician prescribing. Thus, the application of information technology is proving to be beneficial to both physicians and pharmaceutical companies. When e-detailing was introduced in 1996, it was limited to the US; however, numerous other countries soon adopted this novel approach to detailing and now it is popular in many developed nations. The objective of this paper is to demonstrate the rapid growth of e-detailing in the field of pharmaceutical marketing. A review of e-detailing literature was conducted in addition to personal conversations with physicians. E-detailing has the potential to reduce marketing costs, increase accessibility to physicians and offer many of the advantages of face-to-face detailing. E-detailing is gaining acceptance among physicians because they can access the information of a pharmaceutical product at their own time and convenience. However, the drug safety aspect of e-detailing has not been examined and e-detailing remains a supplement to traditional detailing and is not yet a replacement to it.

Developing the STS sound pollution unit for enhancing students' applying knowledge among science technology engineering and mathematics

Science.gov (United States)

Jumpatong, Sutthaya; Yuenyong, Chokchai

2018-01-01

STEM education suggested that students should be enhanced to learn science with integration between Science, Technology, Engineering and Mathematics. To help Thai students make sense of relationship between Science, Technology, Engineering and Mathematics, this paper presents learning activities of STS Sound Pollution. The developing of STS Sound Pollution is a part of research that aimed to enhance students' perception of the relationship between Science Technology Engineering and Mathematics. This paper will discuss how to develop Sound Pollution through STS approach in framework of Yuenyong (2006) where learning activities were provided based on 5 stages. These included (1) identification of social issues, (2) identification of potential solutions, (3) need for knowledge, (4) decisionmaking, and (5) socialization stage. The learning activities could be highlighted as following. First stage, we use video clip of `Problem of people about Sound Pollution'. Second stage, students will need to identification of potential solutions by design Home/Factory without noisy. The need of scientific and other knowledge will be proposed for various alternative solutions. Third stage, students will gain their scientific knowledge through laboratory and demonstration of sound wave. Fourth stage, students have to make decision for the best solution of designing safety Home/Factory based on their scientific knowledge and others (e.g. mathematics, economics, art, value, and so on). Finally, students will present and share their Design Safety Home/Factory in society (e.g. social media or exhibition) in order to validate their ideas and redesigning. The paper, then, will discuss how those activities would allow students' applying knowledge of science technology engineering, mathematics and others (art, culture and value) for their possible solution of the STS issues.

Electronic Patient Reported Outcomes in Paediatric Oncology - Applying Mobile and Near Field Communication Technology.

Science.gov (United States)

Duregger, Katharina; Hayn, Dieter; Nitzlnader, Michael; Kropf, Martin; Falgenhauer, Markus; Ladenstein, Ruth; Schreier, Günter

2016-01-01

Electronic Patient Reported Outcomes (ePRO) gathered using telemonitoring solutions might be a valuable source of information in rare cancer research. The objective of this paper was to develop a concept and implement a prototype for introducing ePRO into the existing neuroblastoma research network by applying Near Field Communication and mobile technology. For physicians, an application was developed for registering patients within the research network and providing patients with an ID card and a PIN for authentication when transmitting telemonitoring data to the Electronic Data Capture system OpenClinica. For patients, a previously developed telemonitoring system was extended by a Simple Object Access Protocol (SOAP) interface for transmitting nine different health parameters and toxicities. The concept was fully implemented on the front-end side. The developed application for physicians was prototypically implemented and the mobile application of the telemonitoring system was successfully connected to OpenClinica. Future work will focus on the implementation of the back-end features.

Sensor Management for Applied Research Technologies (SMART)-On Demand Modeling (ODM) Project

Science.gov (United States)

Goodman, M.; Blakeslee, R.; Hood, R.; Jedlovec, G.; Botts, M.; Li, X.

2006-01-01

NASA requires timely on-demand data and analysis capabilities to enable practical benefits of Earth science observations. However, a significant challenge exists in accessing and integrating data from multiple sensors or platforms to address Earth science problems because of the large data volumes, varying sensor scan characteristics, unique orbital coverage, and the steep learning curve associated with each sensor and data type. The development of sensor web capabilities to autonomously process these data streams (whether real-time or archived) provides an opportunity to overcome these obstacles and facilitate the integration and synthesis of Earth science data and weather model output. A three year project, entitled Sensor Management for Applied Research Technologies (SMART) - On Demand Modeling (ODM), will develop and demonstrate the readiness of Open Geospatial Consortium (OGC) Sensor Web Enablement (SWE) capabilities that integrate both Earth observations and forecast model output into new data acquisition and assimilation strategies. The advancement of SWE-enabled systems (i.e., use of SensorML, sensor planning services - SPS, sensor observation services - SOS, sensor alert services - SAS and common observation model protocols) will have practical and efficient uses in the Earth science community for enhanced data set generation, real-time data assimilation with operational applications, and for autonomous sensor tasking for unique data collection.

Possibility of applying large-scale point cloud/mixed reality technology in decommissioning of nuclear facilities

International Nuclear Information System (INIS)

Shoji, Kimiaki

2017-01-01

After the accident at Tokyo Electric Company's Fukushima No. 1 nuclear power plant, decommissioning projects of nuclear power plants exceeding 40 years since the start of operation began to move in full swing. And four nuclear power plants have already been under decommissioning. Several decommissioning engineering systems (ES) have been developed according to these decommissioning projects. Various problems were clarified and many findings were obtained by these efforts. On the other, advanced information technologies and products such as three-dimensional CAD, CG, 3D laser measurement, computer aided engineering (CAE) and mixed reality (MR) are progressing rapidly. By combining these technologies and products, it has become possible not only to enhance the usefulness of existing 3D CAD data but also to enable high-level digital study that combines reality and virtual models. Furthermore, it can be applied to a wide range of fields such as demolition simulation for dismantling works of nuclear facilities, which is expected to increase in future, human resource development and skill transfer. In this paper, focusing on a video see-through method capable of displaying a virtual object at a correct position of a real image accurately reflecting the positional relationship between the real image and the virtual object, we introduce items that should contribute to the feasibility and usefulness of application to decommissioning of nuclear facilities. (author)

UCAC3 Proper Motion Survey. I. Discovery of New Proper Motion Stars in UCAC3 With 0.40/yr mu 0.18/yr Between Declinations -90 deg and -47 deg

Science.gov (United States)

2010-09-01

overlooked during previous SCR and other searches. The Two-Micron All Sky Survey ( 2MASS ) was used to probe for and reduce systematic errors in UCAC CCD...of 50–200 mas, when compared to 2MASS data. For a detailed description of the derived UCAC3 proper motions see Zacharias et al. (2010). An effort was...meeting the declination and proper motion survey limits, all stars (1) must be in the 2MASS catalog with an e2mpho ( 2MASS photometry error) less than

Hydrogen technologies and the technology learning curve

International Nuclear Information System (INIS)

Rogner, H.-H.

1998-01-01

On their bumpy road to commercialization, hydrogen production, delivery and conversion technologies not only require dedicated research, development and demonstration efforts, but also protected niche markets and early adopters. While niche markets utilize the unique technological properties of hydrogen, adopters exhibit a willingness to pay a premium for hydrogen fueled energy services. The concept of the technology learning curve is applied to estimate the capital requirements associated with the commercialization process of several hydrogen technologies. (author)

Analysis of Laser Sintering Technology

Directory of Open Access Journals (Sweden)

Vladislav Markovič

2014-02-01

Full Text Available The new, high-tech development and customization is one ofthe most important factors in promoting the country‘s economicgrowth indicators. The economic downturn in the industryrequires technology and equipment using a minimumof raw materials and providing maximum performance. Thisstatement perfectly describes the innovative, forward-looking,cost-effective laser powder sintering (SLS technology. Here,thanks to the latest engineering achievements, product surfacesare modified and improved, they gain new characteristics. SLSis viable in automobile, engineering, construction, aerospace,aircraft, printing, medical and other areas.In order to create a product which meets the standards andtechnical documentation it is necessary to use and ensure highquality of raw materials, high-end equipment, qualified personnel,the working environment with proper climatic conditions, ergonomics,etc. But all of these, the quality of the product becomesthe decisive indicators meaningless if know how to properly selectthe laser processing operation. Scanning speed, beam power,pulse frequency, protective gases, powder layer thickness – allof them are the physical and mechanical characteristics of thechange in a small range changes the quality of the product of thefuture, the field of application and performance characteristics.

Proper Lens Care (A Cup of Health with CDC)

Centers for Disease Control (CDC) Podcasts

2017-08-17

Wearing contact lenses is a convenient way to improve vision without having to wear glasses. But unlike glasses, improper care and maintenance of lenses can result in severe eye problems, including blindness. In this podcast, Dr. Jennifer Cope discusses the importance of proper lens hygiene and maintenance.  Created: 8/17/2017 by MMWR.   Date Released: 8/17/2017.

Proper Lens Care (A Minute of Health with CDC)

Centers for Disease Control (CDC) Podcasts

2017-08-17

Wearing contact lenses is a convenient way to improve vision without having to wear glasses. But unlike glasses, improper care and maintenance of lenses can result in severe eye problems, including blindness. In this podcast, Dr. Jennifer Cope discusses the importance of proper lens hygiene and maintenance.  Created: 8/17/2017 by MMWR.   Date Released: 8/17/2017.

An aerial radiological survey of the EG ampersand G Mound Applied Technologies and surrounding area, Miamisburg, Ohio

International Nuclear Information System (INIS)

1992-11-01

An aerial radiological survey was conducted over EG ampersand G Mound Applied Technologies, Miamisburg, Ohio, during the period of June 9--24, 1989. The purpose of the 41-square-kilometer (16-square-mile) survey was to document the terrestrial gamma environment of the plant and surrounding area. In addition, ground-based exposure rate measurements and soil samples were obtained to support the aerial data. An exposure rate contour map at 1 meter above ground level was.constructed from the gamma data and overlaid on an aerial photograph and map of the area. Exposure rates measured in the area typically ranged from 9 to 11 microroentgens per hour (μR/h)

Harnessing the Power of Information Technology: Open Business Models in Higher Education

Science.gov (United States)

Sheets, Robert G.; Crawford, Stephen

2012-01-01

Higher education is under enormous pressure to improve outcomes and reduce costs. Information technology can help achieve these goals, but only if it is properly harnessed. This article argues that one key to harnessing information technology is business model innovation that results in more "open" and "unbundled" operations in learning and…

The user's view of commercially available medical technology

Science.gov (United States)

Harrison, D. C.

1975-01-01

The potential user of new medical equipment for imaging the cardiovascular system is often faced with the problem of deciding whether or not to accept a new piece of equipment or a new technological concept into the practice of cardiology. Considerations for acquiring new medical technology are discussed in some detail. Acquisition of new technology should depend on whether the equipment provides more and relevant clinical data, is for research or for limited use, is properly engineered for patient use, presents information in easily storable and retrievable form, is tested and validated clinically, is fabricated by a reliable manufacturer, is cost effective, and may be readily replaced by a new technology.

Lessons from NASA Applied Sciences Program: Success Factors in Applying Earth Science in Decision Making

Science.gov (United States)

Friedl, L. A.; Cox, L.

2008-12-01

The NASA Applied Sciences Program collaborates with organizations to discover and demonstrate applications of NASA Earth science research and technology to decision making. The desired outcome is for public and private organizations to use NASA Earth science products in innovative applications for sustained, operational uses to enhance their decisions. In addition, the program facilitates the end-user feedback to Earth science to improve products and demands for research. The Program thus serves as a bridge between Earth science research and technology and the applied organizations and end-users with management, policy, and business responsibilities. Since 2002, the Applied Sciences Program has sponsored over 115 applications-oriented projects to apply Earth observations and model products to decision making activities. Projects have spanned numerous topics - agriculture, air quality, water resources, disasters, public health, aviation, etc. The projects have involved government agencies, private companies, universities, non-governmental organizations, and foreign entities in multiple types of teaming arrangements. The paper will examine this set of applications projects and present specific examples of successful use of Earth science in decision making. The paper will discuss scientific, organizational, and management factors that contribute to or impede the integration of the Earth science research in policy and management. The paper will also present new methods the Applied Sciences Program plans to implement to improve linkages between science and end users.

Technology | FNLCR

Science.gov (United States)

The Frederick National Laboratory develops and applies advanced, next-generation technologies to solve basic and applied problems in the biomedical sciences, and serves as a national resource of shared high-tech facilities.

Agents Modeling Experience Applied To Control Of Semi-Continuous Production Process

Directory of Open Access Journals (Sweden)

Gabriel Rojek

2014-01-01

Full Text Available The lack of proper analytical models of some production processes prevents us from obtaining proper values of process parameters by simply computing optimal values. Possible solutions of control problems in such areas of industrial processes can be found using certain methods from the domain of artificial intelligence: neural networks, fuzzy logic, expert systems, or evolutionary algorithms. Presented in this work, a solution to such a control problem is an alternative approach that combines control of the industrial process with learning based on production results. By formulating the main assumptions of the proposed methodology, decision processes of a human operator using his experience are taken into consideration. The researched model of using and gathering experience of human beings is designed with the contribution of agent technology. The presented solution of the control problem coincides with case-based reasoning (CBR methodology.

Economic aspects of advanced energy technologies

International Nuclear Information System (INIS)

Ramakumar, R.; Rodriguez, A.P.; Venkata, S.S.

1993-01-01

Advanced energy technologies span a wide variety of resources, techniques, and end-user requirements. Economic considerations are major factors that shape their harnessing and utilization. A discussion of the basic factors in the economic arena is presented, with particular emphasis on renewable energy technologies--photovoltaics, solar-thermal, wind-electric conversion, biomass utilization, hydro, and tidal and wave energy systems. The following are essential to determine appropriate energy system topologies: proper resource-need matching with an eye on the quality of energy requirements, integrated use of several resources and technologies, and a comprehensive consideration which includes prospecting, collection, conversion, transportation, distribution, storage and reconversion, end use, and subsequent waste management aspects. A few case studies are included to apprise the reader of the status of some of the key technologies and systems

Technology foresight in the Nordic countries

DEFF Research Database (Denmark)

Eerola, A.; Jørgensen, Birte Holst

2002-01-01

and the society at large at the sametime. The report recommends: 1. The establishment of a Nordic forum for technology foresight practitioners and researchers. 2. The creation of a common follow-up system for relevant international technology foresight exercises. 3. The realisation oftechnology foresight......Technology foresight (TF) is increasingly used by governments, funding agencies, R&D institutions and private companies as a tool for strategy development, prioritisation of R&D funds, and learning. Although the Nordic Council of Ministers aims at"developing Nordic region in next 10 years...... and social differences among the Nordic countries. Nordic foresight cooperation may alsoremain as a distant academic exercise if proper links to political and economic decisions cannot be made and maintained. A technology foresight exercise might serve different institutions of the innovation system...

Security force effectiveness and technology

International Nuclear Information System (INIS)

Seaton, M.B.

1988-01-01

No one would propose ineffective security forces. Applied technology always has, as its purpose, to increase effectiveness. Evidence exists, however, that poorly conceived or executed technological solutions can actually do more harm than good. The author argues for improved human factor considerations in physical security applied technology -- especially in the area of security console operations

Technologic Information about Photovoltaic Applied in Urban Residences

OpenAIRE

Stephanie Fabris Russo; Daiane Costa Guimarães; Jonas Pedro Fabris; Maria Emilia Camargo; Suzana Leitão Russo; José Augusto Andrade Filho

2016-01-01

Among renewable energy sources, solar energy is the one that has stood out. Solar radiation can be used as a thermal energy source and can also be converted into electricity by means of effects on certain materials, such as thermoelectric and photovoltaic panels. These panels are often used to generate energy in homes, buildings, arenas, etc., and have low pollution emissions. Thus, a technological prospecting was performed to find patents related to the use of photovoltaic plates in urban re...

Music Teacher Perceptions of a Model of Technology Training and Support in Virginia

Science.gov (United States)

Welch, Lee Arthur

2013-01-01

A plethora of technology resources currently exists for the music classroom of the twenty-first century, including digital audio and video, music software, electronic instruments, Web 2.0 tools and more. Research shows a strong need for professional development for teachers to properly implement and integrate instructional technology resources…

A Case of Ruptured Aneurysm of the Proper Esophageal Artery with Symptomatic Mediastinal Hematoma

Energy Technology Data Exchange (ETDEWEB)

Liu, Jiajia; Sato, Yusuke, E-mail: yusuke@doc.med.akita-u.ac.jp [Akita University Graduate School of Medicine, Department of Thoracic Surgery (Japan); Takahashi, Satoshi [Akita University Graduate School of Medicine, Department of Radiology (Japan); Motoyama, Satoru; Yoshino, Kei; Sasaki, Tomohiko; Imai, Kazuhiro; Saito, Hajime; Minamiya, Yoshihiro [Akita University Graduate School of Medicine, Department of Thoracic Surgery (Japan)

2016-08-15

Mediastinal aneurysms are rare but potentially life-threatening. Among these, bronchial artery aneurysms are most frequently reported, whereas up to now aneurysms of the proper esophageal artery had never been reported. A 69-year-old woman was referred to our hospital for treatment of a massive mediastinal hematoma. Enhanced computed tomography and selective proper esophageal arteriography revealed a 5-mm aneurysm in the proper esophageal artery that arises from the thoracic aorta at the Th8 level and has an anastomotic branch with the bronchial artery peripherally. Transcatheter arterial embolization was successfully performed using a mixture of N-butyl cyanoacrylate and lipiodol (1:3 ratio, 0.3 ml). Post-embolization angiography showed no filling into the aneurysm. The patient recovered with no complications and was discharged on the 25th post-procedure day.

Year 2000 Certification of Mission-Critical DoD Information Technology Systems

National Research Council Canada - National Science Library

1998-01-01

Our objective was to determine whether the year 2000 certification process is adequate to ensure that mission critical DoD information technology systems will continue to operate properly after the year 2000...

Applying RFID technology in nuclear materials management

International Nuclear Information System (INIS)

Tsai, H.; Chen, K.; Liu, Y.; Norair, J.P.; Bellamy, S.; Shuler, J.

2008-01-01

The Packaging Certification Program (PCP) of US Department of Energy (DOE) Environmental Management (EM), Office of Safety Management and Operations (EM-60), has developed a radio frequency identification (RFID) system for the management of nuclear materials. Argonne National Laboratory, a PCP supporting laboratory, and Savi Technology, a Lockheed Martin Company, are collaborating in the development of the RFID system, a process that involves hardware modification (form factor, seal sensor and batteries), software development and irradiation experiments. Savannah River National Laboratory and Argonne will soon field test the active RFID system on Model 9975 drums, which are used for storage and transportation of fissile and radioactive materials. Potential benefits of the RFID system are enhanced safety and security, reduced need for manned surveillance, real time access of status and history data, and overall cost effectiveness

Studying the Technology of Creating Cortical Electrode Instruments using the Rapid Prototyping Technology

Directory of Open Access Journals (Sweden)

Ablyaz T. R.

2017-06-01

Full Text Available This paper shows the results of studying the technology of manufacturing cortical electrode-instruments (EI with the use of indirect methods of the Rapid Prototyping technology. Functional EI prototypes were made by layered synthesis of the photopolymer material with the use of the stereolithography technology (SLA - Stereo Lithography Apparatus. The article is focused on two methods of indirect EI manufacturing. One of the EI prototypes was used for making a molded wax model for hot investment casting, followed by applying copper coating. The second prototype was used for applying copper plating to a prepared current-conductive layer. As a result of EDMing a steel workpiece, both EIs reached the desired depth, which is 1 mm. The copper plating applied to the EI preserves its integrity. Through the use of the casting technology, there is a possibility to cut the economic costs by 35%. Using a prototype with preliminarily applied conductive coating makes it possible to make geometrically-complex EIs.

Applying cinematic materials at geography lessons with suggestopedic educational technology

Directory of Open Access Journals (Sweden)

Вікторія Салімон

2017-09-01

Full Text Available The article describes the use of cinematic materials, especially materials from feature films as one of the best means to assimilate the information on the lessons with suggestopedic educational technology. Scientific research of this method including on geography  essons, have been analyzed. Modern pupils study, learn and grow under the influence of communication technologies, so they require a rapid response and adaptation to modern conditions, as well as other interests, a special motivation in training. Feature films, like nothing else, captivates the modern youth, so there is an opportunity to use the screen art for educational purposes and effect of the suggestopedic influence allows pupils to perceive a large amount of information. The use of cinematic materials with suggestopedic educational technology on geography lessons belongs to audiovisual learning tools, giving the opportunity to acquire different modern motivating knowledge. After analyzing suggestive teaching methods, the results of these methods application have been presented, the essence of cinematic materials use as audiovisual learning tools, especially materials from feature films, on suggestopedic lessons and feasibility of their use in the educational process have been described. The authors propose to focus on artistic learning tools or means of art, as a special type of vacated (released stimulating didactical art, that reveals the spare capacity in education and improves memorization and understanding of the studied material when using cinematic materials on geography lessons with suggestopedic educational technology. Methodical recommendations for the suggestopedic lesson using cinematic materials for the topic «Major relief forms of dry land of the Earth. Mountains» in the general geographic course have been suggested.

ARCHITECTURES FOR DISTRIBUTED AND COMPLEX M-LEARNING SYSTEMS: Applying Intelligent Technologies.

Directory of Open Access Journals (Sweden)

Ozlem OZAN,

2010-04-01

Full Text Available Today mobile technologies have become an integral part of the learning activities. With mobile technologies ―Any time, anywhere, any device‖ promise of e-learning is going to become actually applicable and mobile technologies are going to provide opportunities to be ―always on‖ and connected for twenty-first century learners and to get information on demand with ―just enough, just in time, and just for me‖ approach (Yamamoto, Ozan, & Demiray, 2010. Mobile technology includes both hardware and networking applications; hence both of them are necessary for the existence of m-Learning. Today one of the big challenges of mobile learning is technical issues. This book provides case studies and solution about technical applications of mobile learning.The book's broader audience is anyone who is interested in mobile learning systems‘ architecture. Beside this, it gives valuable information for mobile learning designers.The book is edited by The book is edited by Angel Juan , Thanasis Daradoumis, Fatos Xhafa and Santi Caballé. Angel A. Juan is an associate professor of simulation and data analysis in the computer sciences department at the Open University of Catalonia (Spain.Thanasis Daradoumis is an associate professor

Decision Analysis Modeling for Application and Fielding Selection Applied to Concrete Decontamination Technologies

International Nuclear Information System (INIS)

Ebadian, M.A.; Boudreaux, J.F.

1998-01-01

The purpose of this two-year investigation is to field test innovative technologies for coating and surface removal on concrete floors and compare the compiled data to baseline technologies, thereby ensuring that the best and most cost-effective options are developed and subsequently used during the decontamination and decommissioning (D and D) of U.S. Department of Energy Environmental Management (DOE-EM) sites. Comprehensive and comparable data will be collected in the areas of health and safety, operations, and secondary waste management. The technologies tested will include DOE-EM funded technologies and commercial non-nuclear technologies that have the potential to meet the environmental restoration objectives. This report summarizes the activities performed during Fiscal Year 1996 (FY96) and describes the planned activities for Fiscal Year 1997 (FY97). Accomplishments for FY96 include the completion of preparatory work to begin field testing of innovative technologies. A total of seven technologies will be tested during FY97. As a part of this project, interactive computer software will be developed during FY97, allowing site-specific parameters and technology performance data to be considered when determining the best option given site-specific conditions

OPTIMIZED WTE CONVERSION OF MUNICIPAL SOLID WASTE IN SHANGHAI APPLYING THERMOCHEMICAL TECHNOLOGIES

OpenAIRE

Dai, Siyang

2016-01-01

Thermochemical technologies have been proven effective in treating municipal solid waste (MSW) for many years. China, with a rapid increase of MSW, plans to implement more environmental friendly ways to treat MSW than landfill, which treats about 79 % of total MSW currently. The aim of this master thesis was to find out a suitable thermochemical technology to treat MSW in Shanghai, China. Several different thermochemical technologies are compared in this thesis and plasma gasification was sel...

Applying Technology Management concepts in analyzing e Waste, sustainability and technology development in Mobile Industry: A conceptual perspective

OpenAIRE

Lasrado, Lester Allan; Agnihothri, Subodh; Lugmayr, Artur

2013-01-01

In the highly globalized, competitive and technocrat world, mobile industry is heavily focused on making itself sustainable. In order to achieve this focus should be on improving the e waste management in the industry. Currently the industry is advanced beyond market demand in delivery services to customers in terms of ICT and smart phones. This research paper is trying to conceptualize the aspect of technology management by comparing technology advancement of mobile phone technology and the ...

Proper Living - Exploring Domestic Ideals in Medieval Denmark

DEFF Research Database (Denmark)

Kristiansen, Mette Svart

2014-01-01

Houses frame homes, households, and daily life, and it is reasonable to suggest that ideas of domestic space in medieval society, and ideas of how to live in an orderly and acceptable manner in the eyes of one’s peers and oneself are reflected in domestic architecture, its layout, fittings......, and ornaments. This paper addresses ideas of proper living in affluent rural and urban milieus in medieval Denmark, particularly as they are expressed through houses, inventories, and murals, and it also addresses current challenges in understanding the materialized ideas based on excavations and analysis...

A turbulent jet in crossflow analysed with proper orthogonal decomposition

DEFF Research Database (Denmark)

Meyer, Knud Erik; Pedersen, Jakob Martin; Özcan, Oktay

2007-01-01

and pipe diameter was 2400 and the jet to crossflow velocity ratios were R = 3.3 and R = 1.3. The experimental data have been analysed by proper orthogonal decomposition (POD). For R = 3.3, the results in several different planes indicate that the wake vortices are the dominant dynamic flow structures...

Energy Smart Schools--Applied Research, Field Testing, and Technology Integration

Energy Technology Data Exchange (ETDEWEB)

Nebiat Solomon; Robin Vieira; William L. Manz; Abby Vogen; Claudia Orlando; Kimberlie A. Schryer

2004-12-01

The National Association of State Energy Officials (NASEO) in conjunction with the California Energy Commission, the Energy Center of Wisconsin, the Florida Solar Energy Center, the New York State Energy Research and Development Authority, and the Ohio Department of Development's Office of Energy Efficiency conducted a four-year, cost-share project with the U.S. Department of Energy (USDOE), Office of Energy Efficiency and Renewable Energy to focus on energy efficiency and high-performance technologies in our nation's schools. NASEO was the program lead for the MOU-State Schools Working group, established in conjunction with the USDOE Memorandum of Understanding process for collaboration among state and federal energy research and demonstration offices and organizations. The MOU-State Schools Working Group included State Energy Offices and other state energy research organizations from all regions of the country. Through surveys and analyses, the Working Group determined the school-related energy priorities of the states and established a set of tasks to be accomplished, including the installation and evaluation of microturbines, advanced daylighting research, testing of schools and classrooms, and integrated school building technologies. The Energy Smart Schools project resulted in the adoption of advanced energy efficiency technologies in both the renovation of existing schools and building of new ones; the education of school administrators, architects, engineers, and manufacturers nationwide about the energy-saving, economic, and environmental benefits of energy efficiency technologies; and improved the learning environment for the nation's students through use of better temperature controls, improvements in air quality, and increased daylighting in classrooms. It also provided an opportunity for states to share and replicate successful projects to increase their energy efficiency while at the same time driving down their energy costs.

Model Reduction Based on Proper Generalized Decomposition for the Stochastic Steady Incompressible Navier--Stokes Equations

KAUST Repository

Tamellini, L.; Le Maî tre, O.; Nouy, A.

2014-01-01

In this paper we consider a proper generalized decomposition method to solve the steady incompressible Navier-Stokes equations with random Reynolds number and forcing term. The aim of such a technique is to compute a low-cost reduced basis approximation of the full stochastic Galerkin solution of the problem at hand. A particular algorithm, inspired by the Arnoldi method for solving eigenproblems, is proposed for an efficient greedy construction of a deterministic reduced basis approximation. This algorithm decouples the computation of the deterministic and stochastic components of the solution, thus allowing reuse of preexisting deterministic Navier-Stokes solvers. It has the remarkable property of only requiring the solution of m uncoupled deterministic problems for the construction of an m-dimensional reduced basis rather than M coupled problems of the full stochastic Galerkin approximation space, with m l M (up to one order of magnitudefor the problem at hand in this work). © 2014 Society for Industrial and Applied Mathematics.

Radiating c metric: an example of a proper Ricci Collineation

International Nuclear Information System (INIS)

Aulestia, L.; Nunez, L.; Patino, A.; Rago, H.; Herrera, L.

1984-01-01

A generalization of the charged c metric to the nonstationary case is given. The possibility of associating the energy-momentum tensor with the electromagnetic or neutrino field is discussed. It is shown that, for a specific choice of the time-dependent parameters, the metric admits at least a two-parameter group of proper Ricci collineations

Sensitivity analysis approaches applied to systems biology models.

Science.gov (United States)

Zi, Z

2011-11-01

With the rising application of systems biology, sensitivity analysis methods have been widely applied to study the biological systems, including metabolic networks, signalling pathways and genetic circuits. Sensitivity analysis can provide valuable insights about how robust the biological responses are with respect to the changes of biological parameters and which model inputs are the key factors that affect the model outputs. In addition, sensitivity analysis is valuable for guiding experimental analysis, model reduction and parameter estimation. Local and global sensitivity analysis approaches are the two types of sensitivity analysis that are commonly applied in systems biology. Local sensitivity analysis is a classic method that studies the impact of small perturbations on the model outputs. On the other hand, global sensitivity analysis approaches have been applied to understand how the model outputs are affected by large variations of the model input parameters. In this review, the author introduces the basic concepts of sensitivity analysis approaches applied to systems biology models. Moreover, the author discusses the advantages and disadvantages of different sensitivity analysis methods, how to choose a proper sensitivity analysis approach, the available sensitivity analysis tools for systems biology models and the caveats in the interpretation of sensitivity analysis results.

Experimental investigation of an active magnetic regenerative heat circulator applied to self-heat recuperation technology

International Nuclear Information System (INIS)

Kotani, Yui; Kansha, Yasuki; Ishizuka, Masanori; Tsutsumi, Atsushi

2014-01-01

An experimental investigation into an active magnetic regenerative (AMR) heat circulator based on self-heat recuperation technology, was conducted to evaluate its energy saving potential in heat circulation. In an AMR heat circulator, magnetocaloric effect is applied to recuperate the heat exergy of the process fluid. The recuperated heat can be reused to heat the feed process fluid and realize self-heat recuperation. In this paper, AMR heat circulator has newly been constructed to determine the amount of heat circulated when applied to self-heat recuperation and the energy consumption of the heat circulator. Gadolinium and water was used as the magnetocaloric working material and the process fluid, respectively. The heat circulated amount was determined by measuring the temperature of the process fluid and gadolinium. The net work input for heat circulation was obtained from the magnetizing and demagnetizing forces and the distance travelled by the magnetocaloric bed. The results were compared with the minimum work input needed for heat circulation derived from exergy loss during heat exchange. It was seen that the experimentally obtained value was close to the minimum work input needed for heat circulation. - Highlights: • AMR heat circulator has newly been constructed for experimental evaluation. • Heat circulation in the vicinity of Curie temperature was observed. • Energy consumption of an AMR heat circulator has been measured. • Energy saving for processes near Curie temperature of working material was seen

Deployment Effects of Marin Renewable Energy Technologies

Energy Technology Data Exchange (ETDEWEB)

Brian Polagye; Mirko Previsic

2010-06-17

Given proper care in siting, design, deployment, operation and maintenance, marine and hydrokinetic technologies could become one of the more environmentally benign sources of electricity generation. In order to accelerate the adoption of these emerging hydrokinetic and marine energy technologies, navigational and environmental concerns must be identified and addressed. All developing hydrokinetic projects involve a wide variety of stakeholders. One of the key issues that site developers face as they engage with this range of stakeholders is that many of the possible conflicts (e.g., shipping and fishing) and environmental issues are not well-understood, due to a lack of technical certainty. In September 2008, re vision consulting, LLC was selected by the Department of Energy (DoE) to apply a scenario-based approach to the emerging wave and tidal technology sectors in order to evaluate the impact of these technologies on the marine environment and potentially conflicting uses. The project’s scope of work includes the establishment of baseline scenarios for wave and tidal power conversion at potential future deployment sites. The scenarios will capture variations in technical approaches and deployment scales to properly identify and characterize environmental impacts and navigational effects. The goal of the project is to provide all stakeholders with an improved understanding of the potential effects of these emerging technologies and focus all stakeholders onto the critical issues that need to be addressed. This groundwork will also help in streamlining siting and associated permitting processes, which are considered key hurdles for the industry’s development in the U.S. today. Re vision is coordinating its efforts with two other project teams funded by DoE which are focused on regulatory and navigational issues. The results of this study are structured into three reports: 1. Wave power scenario description 2. Tidal power scenario description 3. Framework for

The development of control technologies applied to waste processing operations

International Nuclear Information System (INIS)

Grasz, E.; Baker, S.; Couture, S.; Dennison, D.; Holliday, M.; Hurd, R.; Kettering, B.; Merrill, R.; Wilhelmson, K.

1993-02-01

Typical waste and residue processes involve some level of human interaction. The risk of exposure to unknown hazardous materials and the potential for radiation contamination provide the impetus for physically separating or removing operators from such processing steps. Technologies that facilitate separation of the operator from potential contamination include glove box robotics; modular systems for remote and automated servicing; and interactive controls that minimize human intervention. Lawrence Livermore National Laboratory (LLNL) is developing an automated system which by design will supplant the operator for glove box tasks, thus affording protection from the risk of radiation exposure and minimizing operator associated waste.This paper describes recent accomplishments in technology development and integration, and outlines the future goals at LLNL for achieving this integrated, interactive control capability

Evaluating the Economic Performance of High-Technology Industry and Energy Efficiency: A Case Study of Science Parks in Taiwan

Directory of Open Access Journals (Sweden)

Min-Ren Yan

2013-02-01

Full Text Available High-technology industries provide opportunities for economic growth, but also raise concerns because of their energy-demanding nature. This paper provides an integrated evaluation of both economic benefits and energy efficiency of high-technology industries based on the real data from one of the globally recognized high-technology industrial clusters, the national science parks in Taiwan. A nation-wide industrial Input-Output Analysis is conducted to demonstrate the positive effects of science parks on national economic developments and industrial upgrades. The concept of energy intensity and an energy-efficient economy index are applied to an integrated assessment of the relationship between economic growth and energy consumption. The proposed case study suggests that economic and energy efficiency objectives can be simultaneously achieved by the development of high-technology industries, while three energy policy implications are considered. First, a nation-wide macro viewpoint is needed and high-technology industries should be considered as parts of the national/regional economies by governmental agencies. Second, a proper industrial clustering mechanism and the shared environmental facilities supported by the government, such as planned land and road usage, electricity and water supply, telecommunications system, sewerage system and wastewater treatments, can improve energy efficiency of high-technology industries. Third, the governmental policies on the taxing and management system in science parks would also direct energy-efficient economy of high-technology industries.

Applying artificial intelligence technology to support decision-making in nursing: A case study in Taiwan.

Science.gov (United States)

Liao, Pei-Hung; Hsu, Pei-Ti; Chu, William; Chu, Woei-Chyn

2015-06-01

This study applied artificial intelligence to help nurses address problems and receive instructions through information technology. Nurses make diagnoses according to professional knowledge, clinical experience, and even instinct. Without comprehensive knowledge and thinking, diagnostic accuracy can be compromised and decisions may be delayed. We used a back-propagation neural network and other tools for data mining and statistical analysis. We further compared the prediction accuracy of the previous methods with an adaptive-network-based fuzzy inference system and the back-propagation neural network, identifying differences in the questions and in nurse satisfaction levels before and after using the nursing information system. This study investigated the use of artificial intelligence to generate nursing diagnoses. The percentage of agreement between diagnoses suggested by the information system and those made by nurses was as much as 87 percent. When patients are hospitalized, we can calculate the probability of various nursing diagnoses based on certain characteristics. © The Author(s) 2013.

Problems of applied geochemistry

Energy Technology Data Exchange (ETDEWEB)

Ovchinnikov, L N

1983-01-01

The concept of applied geochemistry was introduced for the first time by A. Ye. Fersman. He linked the branched and complicated questions of geochemistry with specific problems of developing the mineral and raw material base of our country. Geochemical prospecting and geochemistry of mineral raw materials are the most important sections of applied geochemistry. This now allows us the right to view applied geochemistry as a sector of science which applies geochemical methodology, set of geochemical methods of analysis, synthesis, geological interpretation of data based on laws governing theoretical geochemistry to the solution of different tasks of geology, petrology, tectonics, stratigraphy, science of minerals and other geological sciences, and also the technology of mineral raw materials, interrelationships of man and nature (ecogeochemistry, technogeochemistry, agrogeochemistry). The main problem of applied geochemistry, geochemistry of ore fields is the prehistory of ore formation. This is especially important for metallogenic and forecasting constructions, for an understanding of the reasons for the development of fields and the detection of laws governing their distribution, their genetic links with the general geological processes and the products of these processes.

E-learning Materials Development: Applying and Implementing Software Reuse Principles and Granularity Levels in the Small

OpenAIRE

Nabil Arman

2010-01-01

E-learning materials development is typically acknowledged as an expensive, complicated, and lengthy process, often producing materials that are of low quality and difficult to adaptand maintain. It has always been a challenge to identify proper e-learning materials that can be reused at a reasonable cost and effort. In this paper, software engineering reuse principlesare applied to e-learning materials development process. These principles are then applied and implemented in a prototype that...

Pipeline coating inspection in Mexico applying surface electromagnetic technology

Energy Technology Data Exchange (ETDEWEB)

Delgado, O.; Mousatov, A.; Nakamura, E.; Villarreal, J.M. [Instituto Mexicano del Petroleo (IMP), Mexico City (Mexico); Shevnin, V. [Moscow State University (Russian Federation); Cano, B. [Petroleos Mexicanos (PEMEX), Mexico City (Mexico)

2009-07-01

The main problems in the pipeline systems in Mexico include: extremely aggressive soil characterized by a high clay content and low resistivity, interconnection between several pipes, including electrical contacts of active pipelines with out of service pipes, and short distances between pipes in comparison with their depths which reduce the resolution of coating inspection. The results presented in this work show the efficiency of the Surface Electromagnetic Pipeline Inspection (SEMPI) technology to determine the technical condition of pipelines in situations before mentioned. The SEMPI technology includes two stages: regional and detailed measurements. The regional stage consists of magnetic field measurements along the pipeline using large distances (10 - 100 m) between observation points to delimit zones with damaged coating. For quantitative assessing the leakage and coating resistances along pipeline, additional measurements of voltage and soil resistivity measurements are performed. The second stage includes detailed measurements of the electric field on the pipe intervals with anomalous technical conditions identified in the regional stage. Based on the distribution of the coating electric resistance and the subsoil resistivity values, the delimitation of the zones with different grade of coating quality and soil aggressiveness are performed. (author)

Biopower market impact: Applying advanced technologies to specific needs

International Nuclear Information System (INIS)

Gregoire, C.E.; Bain, R.L.; Craig, K.R.

1994-01-01

The impact of biopower on the electric power capacity in the United States is projected to increase 5- to 10-fold by the year 2010. A number of competing technologies will likely be available that will provide a variety of advantages for the U.S. economy, from creating jobs in rural areas to increasing the demand for component manufacturing. Biopower also offers environmental advantages over conventional fossil fuel-fired power plants, particularly global climate change benefits. Feedstock type and availability, proximity to users or transmission stations, and markets for potential byproducts will influence which biomass conversion technology is selected and the scale of operation. Cofiring biomass in aging coal-fired power plants represents a near-term alternative for reducing sulfur and CO 2 emissions. Producing biocrude from pyrolysis processes may be suitable for isolated feedstock supplies with high transportation costs or to supply fuel to a single large family in a centralized area. Integrated gasification/combined cycle (IGCC) systems offer high efficiencies and low capital costs. More advanced systems, including fuel cells, will offer additional opportunities for increasing the impact of biopower on the nation's power production

TECHNOLOGY OF REPAIRING OPERATIONAL SUITABILITY BITUMEN-RUBEROID CARPET

Directory of Open Access Journals (Sweden)

MISHUK K. M.

2017-01-01

Full Text Available Raising of problem. In the article is presented the analysis of the existing technologies for the restoration of the operational usability of bitumen-polymeric carpet, which allowed to identify their disadvantages, suggested ways to solve problems and highlighted the results of the studies. Firstly, existing bitumen-ruberoid carpet has a residual hydro insulating capacity that can be effectively used. Secondly, the physical condition of the repaired carpet has different types of defects and damage without the proper removal of which is difficult to ensure the desired outcome. The applying of additional layers in conditions of moistening of the lower layers and other defects contributes to their conservation and accelerated loss of operational integrity.Removal of these impacts can be up to 40-50% of all work, can not provide the required effectiveness outcomes in terms of durability, reliability and cost. Therefore the problem is to find ways to achieve a longer after repairing operation with simultaneous reduction of consumables indicators. Purpose of the study is to develop technological solutions serviceability restoration of roofing using unrolling technologies on the principles to minimize the impact of negative factors and the maximum possible use and strengthen the remaining hydro potential of the insulating coating through the use of special impregnating - saturating compositions. Features such compositions are based on the ability to deeply penetrate the thick bitumen-ruberoid carpet and restore his lost components and provide increased water resistance. Conclusion. The article can be introduced in practice of repair-refurbishable works of soft roofing covering of buildings and constructions.

Proper survey methods for research of aquatic plant ecology and management

Science.gov (United States)

Proper survey methods are essential for objective, quantitative assessment of the distribution and abundance of aquatic plants as part of research and demonstration efforts. For research, the use of the appropriate method is an essential part of the scientific method, to ensure that the experimenta...

IEEE transactions on vehicular technology, Vol. Vt-19, No. 1

Science.gov (United States)

1970-02-01

This special issue deals not only with integrated electronic systems but with the technology that is required to achieve successful operation. To place some of the 1969 dimensions of the highway system in the United States in proper focus, we note th...

Impact of quasar proper motions on the alignment between the International Celestial Reference Frame and the Gaia reference frame

Science.gov (United States)

Liu, J.-C.; Malkin, Z.; Zhu, Z.

2018-03-01

The International Celestial Reference Frame (ICRF) is currently realized by the very long baseline interferometry (VLBI) observations of extragalactic sources with the zero proper motion assumption, while Gaia will observe proper motions of these distant and faint objects to an accuracy of tens of microarcseconds per year. This paper investigates the difference between VLBI and Gaia quasar proper motions and it aims to understand the impact of quasar proper motions on the alignment of the ICRF and Gaia reference frame. We use the latest time series data of source coordinates from the International VLBI Service analysis centres operated at Goddard Space Flight Center (GSF2017) and Paris observatory (OPA2017), as well as the Gaia auxiliary quasar solution containing 2191 high-probability optical counterparts of the ICRF2 sources. The linear proper motions in right ascension and declination of VLBI sources are derived by least-squares fits while the proper motions for Gaia sources are simulated taking into account the acceleration of the Solar system barycentre and realistic uncertainties depending on the source brightness. The individual and global features of source proper motions in GSF2017 and OPA2017 VLBI data are found to be inconsistent, which may result from differences in VLBI observations, data reduction and analysis. A comparison of the VLBI and Gaia proper motions shows that the accuracies of the components of rotation and glide between the two systems are 2-4 μas yr- 1 based on about 600 common sources. For the future alignment of the ICRF and Gaia reference frames at different wavelengths, the proper motions of quasars must necessarily be considered.

Technological Monitoring Applied to Survey-Based on Brazilian Patent Applications about PEMFC

Directory of Open Access Journals (Sweden)

Deysimar de Souza Carvalho

2011-06-01

Full Text Available The present study aims to show the importance of patents as an instrument of technological innovation and to assess the relevance of technology of PEMFC in Brazil by means of the technological monitoring methodology from 1996 to 2005. This study used different Industrial Property Databases (INPI-BR, ESPACENET and DWPI, in order to retrieve the BR applications in each database. Relevant keywords as “fuel cell” were used in combination with specific IPC (H01M8 in order to assess the main applicants, countries, IPCs and technological innovation over time. In Brazil, the country holding more requests in this area is the United States (US with 53,7% of the patent applications, while Brazil (BR accounts for 4,4% of the total requests. It was also observed that the North-American company, UTC Fuel Cells comes on top of the list and that there were no patent applications of Brazilian origin (BR in other countries.

Technology development and applications at Fernald

International Nuclear Information System (INIS)

Pettit, P.J.; Skriba, M.C.; Warner, R.D.

1995-01-01

At the Fernald Environmental Management Project (FEMP) northwest of Cincinnati, Ohio, the U.S. Department of Energy and contractor Fernald Environmental Restoration Management Corporation (FERMCO) are aggressively pursuing both the development and the application of improved, innovative technology to the environmental restoration task. Application of emerging technologies is particularly challenging in a regulatory environment that places pressure on operational managers to develop and meet tight schedules. The regulatory and operational needs make close communication essential between technology developers and technology users (CERCLA/RCRA Unit managers). At Fernald this cooperation and communication has led, not only to the development and demonstration of new technologies with applications at other sites, but also to application of new technologies directly to the Fernald clean up. New technologies have been applied to improve environmental safety and health, improve the effectiveness of restoration efforts, and to cut restoration costs. The paper will describe successful efforts to develop and apply new technologies at the FEMP and will emphasize those technologies that have been applied and are planned for use in the clean up of this former uranium production facility

Industrial scale application of irradiation technologies in Turkey

International Nuclear Information System (INIS)

Siyakus, G.

2001-01-01

Sufficient and safer foods, better health care, cleaner environment and higher life standards are the shared objectives and desires of the humankind. The rapid increase in the world population necessitates the development and application of new technologies in order to meet these desires. The need for such technologies is more important for developing countries, when it is thought that the major share of the population increase is originating from that regions. Irradiation technology, as a rather new one, may have a considerable contribution in this respect, providing that proper application . Although, a wide range of application areas, changing from flue gas treatment to polymer production, exists in this respect, transferring or developing new technologies requires time, trained personnel and equipment

Technology | FNLCR Staging

Science.gov (United States)

The Frederick National Lab develops and applies advanced, next-generation technologies to solve basic and applied problems in the biomedical sciences, and serves as a national resource of shared high-tech facilities.

Research on choice of xanthates blend dedicated to processing technology at KGHM Polska Miedz S.A. concentrators

Directory of Open Access Journals (Sweden)

Pawlos Witold

2016-01-01

Full Text Available A proper choice of reagents quality and quantity has a great influence on the flotation process effectiveness. Attempts to develop a method to create sodium xanthates blends used as a collector for copper sulphides flotation was undertaken at the Division of Concentrators of KGHM Polska Miedz S.A. Laboratory tests involving different blends of sodium xanthates were performed followed by the data analysis of the results. The obtained results proved that it was profitable to prepare a blend consisted of the so called “weak” and “strong” xanthates with a minimum difference in the alkyl chain length of two carbon atoms. The results of research will be helpful for development of specific xanthates blends dedicated to technology applied at KGHM under industrial conditions.

An Ultrasonic Guided Wave Method to Estimate Applied Biaxial Loads (Preprint)

Science.gov (United States)

2011-11-01

VALIDATION A fatigue test was performed with an array of six surface-bonded PZT transducers on a 6061 aluminum plate as shown in Figure 4. The specimen...direct paths of propagation are oriented at different angles. This method is applied to experimental sparse array data recorded during a fatigue test...and the additional complication of the resulting fatigue cracks interfering with some of the direct arrivals is addressed via proper selection of

Applied thermodynamics for engineering technologies. 4th edition

International Nuclear Information System (INIS)

Eastop, T.D.; Mc Conkey, A.

1986-01-01

This book presents a complete introduction to the fundamentals of the theory and application of thermodynamics. Revisions include a new chapter on the sources, uses and management of energy as well as major updating of the chapters on internal combustion engines and psychometry. It features new sections on extended surfaces, two-dimensional and transient conduction using finite difference methods, and the NTU method for heat exchanger design. It also stresses the application of theory to real situations and applies principles to practical engineering problems

When Things Don’t Look Right: What Appear to be Proper Motion Discrepancies in the WDS

Science.gov (United States)

Harshaw, Richard

2017-10-01

Proper motion data for double stars are included for most of the records in the Washington Double Star Catalog (WDS). In many cases, the proper motion data agree well with the observed changes in the system over time. But in other cases, the proper motion data do not align well with the observations. It is therefore incumbent on the double star researcher to treat any research based on proper motions with caution to be sure that wrong conclusions are not drawn. Possible reasons for such discrepancies are explored.

Rhizobacteria in mycorrhizosphere improved plant health and yield of banana by offering proper nourishment and protection against diseases.

Science.gov (United States)

Phirke, Niteen V; Kothari, Raman M; Chincholkar, Sudhir B

2008-12-01

The corporate R&D banana orchards of Musa paradisiaca (dwarf Cavendish AAA, var. shrimanti) on a medium black alluvial soil with low nutrients harboured diversified species of vesicular-arbuscular mycorrhizal (VAM) fungi. These fungi infected the roots severely (69.2%), showed elevated (69.8 g(-1) soil) spore density, increased soil bacterial density (245 x 10(8) cfu g(-1)), produced siderophores (58.2%) and reduced nematode population (2.3 g(-1)) in the mycorrhizosphere of plants for integrated plant nutrition management (IPNM) system as compared to traditional treatment of applying chemical fertilisers alone and other test treatments. The interactions of plant roots with native VAM and local and applied rhizobacteria in the matrix of soil conditioner enabled proper nourishment and protection of crop in IPNM treatment as compared to traditional way. Hence, exploitation of plant growth promoting rhizobacteria through judiciously designed IPNM system revealed the (a) relatively increased banana productivity (21.6%, 76 MT ha(-1)), (b) least occurrence of fusarial wilt and negligible evidence of Sigatoka, (c) saving of 50% chemical fertilisers and (d) permitted control over soil fertility in producer's favour over traditional cultivation practices. These findings are discussed in detail.

Properly quantized history-dependent Parrondo games, Markov processes, and multiplexing circuits

Energy Technology Data Exchange (ETDEWEB)

Bleiler, Steven A. [Fariborz Maseeh Department of Mathematics and Statistics, Portland State University, PO Box 751, Portland, OR 97207 (United States); Khan, Faisal Shah, E-mail: faisal.khan@kustar.ac.a [Khalifa University of Science, Technology and Research, PO Box 127788, Abu Dhabi (United Arab Emirates)

2011-05-09

Highlights: History-dependent Parrondo games are viewed as Markov processes. Quantum mechanical analogues of these Markov processes are constructed. These quantum analogues restrict to the original process on measurement. Relationship between these analogues and a quantum circuits is exhibited. - Abstract: In the context of quantum information theory, 'quantization' of various mathematical and computational constructions is said to occur upon the replacement, at various points in the construction, of the classical randomization notion of probability distribution with higher order randomization notions from quantum mechanics such as quantum superposition with measurement. For this to be done 'properly', a faithful copy of the original construction is required to exist within the new quantum one, just as is required when a function is extended to a larger domain. Here procedures for extending history-dependent Parrondo games, Markov processes and multiplexing circuits to their quantum versions are analyzed from a game theoretic viewpoint, and from this viewpoint, proper quantizations developed.

Prehepatocholedochal proper hepatic artery. Rare anatomical variant. Surgical considerations. Case report.

Science.gov (United States)

Ardeleanu, V; Chicoş, S; Tutunaru, D; Georgescu, C

2014-01-01

In classical anatomic variants, the proper hepatic artery (PHA)continues the common hepatic artery (CHA) after the gastroduodenal artery (GDA) detaches itself and divides into the right hepatic artery (RHA) and left hepatic artery (LHA), the proper hepatic artery being located to the left of the hepatocholedochal duct (HCD). This paper presents an abnormal positioning of the PHA placed before the HCD with an increased diameter of about 5-7 mm, which could be confused with the HCD. We present the case of a 57 year-old woman diagnosed with acute lithiasic cholecystitis, associated with hypersplenism and hypertension. The literature mentions manifold anatomical variants of arterial liver vascularization,including PHA. For this reason, this paper presents an overview of similar cases that can be found in medical literature. The aforementioned case is a rare topographic anatomy for the PHA that can easily pass for HCD especially during celioscopy, therefore it is crucial for this to be acknowledged by all surgeons. Celsius.

Operational characterization of CSFH MEMS technology based hinges

Science.gov (United States)

Crescenzi, Rocco; Balucani, Marco; Belfiore, Nicola Pio

2018-05-01

Progress in MEMS technology continuously stimulates new developments in the mechanical structure of micro systems, such as, for example, the concept of so-called CSFH (conjugate surfaces flexural hinge), which makes it possible, simultaneously, to minimize the internal stresses and to increase motion range and robustness. Such a hinge may be actuated by means of a rotary comb-drive, provided that a proper set of simulations and tests are capable to assess its feasibility. In this paper, a CSFH has been analyzed with both theoretical and finite element (FEM) methods, in order to obtain the relation between voltage and generated torque. The FEM model considers also the fringe effect on the comb drive finger. Electromechanical couple-field analysis is performed by means of both direct and load transfer methods. Experimental tests have been also performed on a CSFH embedded in a MEMS prototype, which has been fabricated starting from a SOI wafer and using D-RIE (deep reactive ion etching). Results showed that CSFH performs better than linear flexure hinges in terms of larger rotations and less stress for given applied voltage.

Airspace Technology Demonstration 3 (ATD-3): Applied Traffic Flow Management Project Overview

Science.gov (United States)

Gong, Chester

2016-01-01

ATD-3 Project Overview for 3rd Joint Workshop for KAIA-KARI - NASA ATM Research Collaboration. This presentation gives a high level description of the ATD-3 project and related technologies. These technologies include Multi-Flight Common Routes (MFCR), Traffic Aware Strategic Aircrew Requests (TASAR) and Dynamic Routes for Arrivals in Weather (DRAW).

THE COMMON AND PROPER NOUNS BETWEEN ALBANIAN AND ENGLISH

OpenAIRE

Shkelqim Millaku

2017-01-01

The noun in Albanian language classified as common and proper. The common nouns in turn divide into countable and uncountable. Collective nouns and substance nouns are subclasses of the other classes. The structure of noun formation between Albanian and English on the general aspect of morphology and syntax still didn’t study in the way of comparative, contrast and generative. Those fields are our object of study. In Albanian and English we find some concepts of studies for noun for exam...

Does applying technology throughout the medication use process improve patient safety with antineoplastics?

Science.gov (United States)

Bubalo, Joseph; Warden, Bruce A; Wiegel, Joshua J; Nishida, Tess; Handel, Evelyn; Svoboda, Leanne M; Nguyen, Lam; Edillo, P Neil

2014-12-01

Medical errors, in particular medication errors, continue to be a troublesome factor in the delivery of safe and effective patient care. Antineoplastic agents represent a group of medications highly susceptible to medication errors due to their complex regimens and narrow therapeutic indices. As the majority of these medication errors are frequently associated with breakdowns in poorly defined systems, developing technologies and evolving workflows seem to be a logical approach to provide added safeguards against medication errors. This article will review both the pros and cons of today's technologies and their ability to simplify the medication use process, reduce medication errors, improve documentation, improve healthcare costs and increase provider efficiency as relates to the use of antineoplastic therapy throughout the medication use process. Several technologies, mainly computerized provider order entry (CPOE), barcode medication administration (BCMA), smart pumps, electronic medication administration record (eMAR), and telepharmacy, have been well described and proven to reduce medication errors, improve adherence to quality metrics, and/or improve healthcare costs in a broad scope of patients. The utilization of these technologies during antineoplastic therapy is weak at best and lacking for most. Specific to the antineoplastic medication use system, the only technology with data to adequately support a claim of reduced medication errors is CPOE. In addition to the benefits these technologies can provide, it is also important to recognize their potential to induce new types of errors and inefficiencies which can negatively impact patient care. The utilization of technology reduces but does not eliminate the potential for error. The evidence base to support technology in preventing medication errors is limited in general but even more deficient in the realm of antineoplastic therapy. Though CPOE has the best evidence to support its use in the

Assessing the accuracy of forecasting: applying standard diagnostic assessment tools to a health technology early warning system.

Science.gov (United States)

Simpson, Sue; Hyde, Chris; Cook, Alison; Packer, Claire; Stevens, Andrew

2004-01-01

Early warning systems are an integral part of many health technology assessment programs. Despite this finding, to date, there have been no quantitative evaluations of the accuracy of predictions made by these systems. We report a study evaluating the accuracy of predictions made by the main United Kingdom early warning system. As prediction of impact is analogous to diagnosis, a method normally applied to determine the accuracy of diagnostic tests was used. The sensitivity, specificity, and predictive values of the National Horizon Scanning Centre's prediction methods were estimated with reference to an (imperfect) gold standard, that is, expert opinion of impact 3 to 5 years after prediction. The sensitivity of predictions was 71 percent (95 percent confidence interval [CI], 0.36-0.92), and the specificity was 73 percent (95 percent CI, 0.64-0.8). The negative predictive value was 98 percent (95 percent CI, 0.92-0.99), and the positive predictive value was 14 percent (95 percent CI, 0.06-0.3). Forecasting is difficult, but the results suggest that this early warning system's predictions have an acceptable level of accuracy. However, there are caveats. The first is that early warning systems may themselves reduce the impact of a technology, as helping to control adoption and diffusion is their main purpose. The second is that the use of an imperfect gold standard may bias the results. As early warning systems are viewed as an increasingly important component of health technology assessment and decision making, their outcomes must be evaluated. The method used here should be investigated further and the accuracy of other early warning systems explored.

Applying the food technology neophobia scale in a developing country context. A case-study on processed matooke (cooking banana) flour in Central Uganda.

Science.gov (United States)

De Steur, Hans; Odongo, Walter; Gellynck, Xavier

2016-01-01

The success of new food technologies largely depends on consumers' behavioral responses to the innovation. In Eastern Africa, and Uganda in particular, a technology to process matooke into flour has been introduced with limited success. We measure and apply the Food technology Neophobia Scale (FTNS) to this specific case. This technique has been increasingly used in consumer research to determine consumers' fear for foods produced by novel technologies. Although it has been successful in developed countries, the low number and limited scope of past studies underlines the need for testing its applicability in a developing country context. Data was collected from 209 matooke consumers from Central Uganda. In general, respondents are relatively neophobic towards the new technology, with an average FTNS score of 58.7%, which hampers the success of processed matooke flour. Besides socio-demographic indicators, 'risk perception', 'healthiness' and the 'necessity of technologies' were key factors that influenced consumer's preference of processed matooke flour. Benchmarking the findings against previous FTNS surveys allows to evaluate factor solutions, compare standardized FTNS scores and further lends support for the multidimensionality of the FTNS. Being the first application in a developing country context, this study provides a case for examining food technology neophobia for processed staple crops in various regions and cultures. Nevertheless, research is needed to replicate this method and evaluate the external validity of our findings. Copyright © 2015 Elsevier Ltd. All rights reserved.

Army Technology

Science.gov (United States)

2015-02-01

that allows them to perform applied research under the Institute for Biotechnology research team 1 2 3 20 | ARMY TECHNOLOGY MAGAZINE ...DASA(R&T) Deputy Assistant Secretary of the Army for Research and Technology Download the magazine , view online or read each individual story with...Army photo by Conrad Johnson) Front and back cover designs by Joe Stephens EXECUTIVE DEPUTY TO THE COMMANDING GENERAL Army Technology Magazine is an

The Extent of Al-Balqa Applied University's Students' Perception of the Importance of Means of Information and Communication Technology in High Education in Jordan

Science.gov (United States)

Al Zou'bi, Abdallah S.; Al-Onizat, Sabah

2015-01-01

This study aimed to identify the effectiveness of using information technology and communications' means in the academic education from the perspective of Al-Balqa Applied University's students. And to achieve this goal, the researchers prepared and developed a questionnaire as a tool of the study including 26 items. The population of the study,…

Embedded Web Technology: Applying World Wide Web Standards to Embedded Systems

Science.gov (United States)

Ponyik, Joseph G.; York, David W.

2002-01-01

Embedded Systems have traditionally been developed in a highly customized manner. The user interface hardware and software along with the interface to the embedded system are typically unique to the system for which they are built, resulting in extra cost to the system in terms of development time and maintenance effort. World Wide Web standards have been developed in the passed ten years with the goal of allowing servers and clients to intemperate seamlessly. The client and server systems can consist of differing hardware and software platforms but the World Wide Web standards allow them to interface without knowing about the details of system at the other end of the interface. Embedded Web Technology is the merging of Embedded Systems with the World Wide Web. Embedded Web Technology decreases the cost of developing and maintaining the user interface by allowing the user to interface to the embedded system through a web browser running on a standard personal computer. Embedded Web Technology can also be used to simplify an Embedded System's internal network.

Survey of Enabling Technologies for CAPS

Science.gov (United States)

Antol, Jeffrey; Mazanek, Daniel D.; Koons, Robert H.

2005-01-01

The enabling technologies required for the development of a viable Comet/Asteroid Protection System (CAPS) can be divided into two principal areas: detection and deflection/orbit modification. With the proper funding levels, many of the technologies needed to support a CAPS architecture could be achievable within the next 15 to 20 years. In fact, many advanced detection technologies are currently in development for future in-space telescope systems such as the James Webb Space Telescope (JWST), formerly known as the Next Generation Space Telescope. It is anticipated that many of the JWST technologies would be available for application for CAPS detection concepts. Deflection/orbit modification technologies are also currently being studied as part of advanced power and propulsion research. However, many of these technologies, such as extremely high-output power systems, advanced propulsion, heat rejection, and directed energy systems, would likely be farther term in availability than many of the detection technologies. Discussed subsequently is a preliminary examination of the main technologies that have been identified as being essential to providing the element functionality defined during the CAPS conceptual study. The detailed requirements for many of the technology areas are still unknown, and many additional technologies will be identified as future in-depth studies are conducted in this area.

The application of wiki technology in medical education.

Science.gov (United States)

Rasmussen, Andrew; Lewis, Melanie; White, Jonathan

2013-01-01

BACKGROUND, AIMS AND METHODS: Recent years have seen the introduction of web-based technologies such as the 'wiki', which is a webpage whose content can be edited in real time using a web browser. This article reviews the current state of knowledge about the use of wikis in education, and considers whether wiki technology has features that might prove useful in medical education. Advantages and challenges of the technology are discussed, and recommendations for use are provided. We believe that wiki technology offers a number of potential benefits for administrators, students and instructors, including the ability to share information online, to construct knowledge together, to facilitate collaboration and to enable social learning and peer feedback. We believe that with proper planning and instructional design, wiki technology can be usefully employed in medical education. We intend to continue to study the impact of wiki technology in our own programme, and we encourage others to evaluate the application of wiki technology in other areas of medical education.

Radar Measurements of Ocean Surface Waves using Proper Orthogonal Decomposition

Science.gov (United States)

2017-03-30

Golinval, 2002, Physical interpretation of the proper orthogonal modes using the singular value decomposition, Journal of Sound and Vibration, 249...complex and contain contributions from the environment (e.g., wind, waves, currents) as well as artifacts associated with electromagnetic (EM) (wave...Although there is no physical basis/ interpretation inherent to the method because it is purely a mathematical tool, there has been an increasing

Parallaxes and Proper Motions From the MCCormick Observatory: List 47

Science.gov (United States)

Ianna, Philip A.; Patterson, Richard J.; Swain, Melanie A.

1996-01-01

Trigonometric parallaxes and proper motions are presented for 32 late-type stars observed photographically with the Leander McCormick 67 cm refractor. Eighteen of the stars have no previously published parallaxes. Twenty one of the stars are K and M dwarfs identified by Vyssotsky and his collaborators. The list includes several x-ray luminous M dwarfs, a rapidly rotating spotted flare star, and two astrometric binaries.

uvby photometry in McCormick proper motion fields

Science.gov (United States)

Degewij, J.

1982-01-01

The Danish 50 cm telescope at the European Southern Observatory was used to obtain high-precision uvby photometry for 50 F2 to G2 stars, with V values in the 9.4-12.3 mag range, which were selected in the southern galactic polar regions of the McCormick proper motion fields and measured on six different nights. The brighter stars are found to systematically exhibit smaller m(1) indices, of about 0.02 mag, upon comparison with the earlier data of Blaauw et al (1976). Single measurements are given for 98 stars in eight McCormick fields at intermediate southern galactic latitudes.

Enhanced situational technologies applied to ship channels

Science.gov (United States)

Helgeson, Michael A.; Wacker, Roger A.

1997-06-01

The Houston Ship Channel ranks as America's number one port in foreign tonnage by welcoming more than 50,000 cargo ships and barges annually. Locally 196,000 jobs, 5.5 billion dollars in business revenue and 213 million dollars in taxes are generated. Unfortunately, 32 days of each year vessel traffic stops for hours due to fog causing an estimated 40- 100 million dollars loss as ships idly wait in the channel for weather to clear. In addition, poor visibility has contributed to past vessel collisions which have resulted in channel closure, and associated damage to property and the environment. Today's imaging technology for synthetic vision systems and enhanced situational awareness systems offers a new solution to this problem. Whereas, typically these systems have been targeted at aircraft landing systems the channel navigation application provides a peripheral ground based market. This paper describes two imaging solutions to the problem. One using an active 35 GHz scanning radar and the other using a 94 GHz passive millimeter wave camera.

TheBrain Technologies Corporation: Collapsing the Time to Knowledge.

Science.gov (United States)

Misek, Marla

2003-01-01

TheBrain was created to take advantage of the most powerful information processor in existence - the human mind. Explains products of TheBrain Technologies Corporation,, which has developed computer interfaces to help individual users and corporations organize information in ways that make sense to them in the proper context. Describes a…

Applied Genomics of Foodborne Pathogens

DEFF Research Database (Denmark)

and customized source of information designed for and accessible to microbiologists interested in applying cutting-edge genomics in food safety and public health research. This book fills this void with a well-selected collection of topics, case studies, and bioinformatics tools contributed by experts......This book provides a timely and thorough snapshot into the emerging and fast evolving area of applied genomics of foodborne pathogens. Driven by the drastic advance of whole genome shot gun sequencing (WGS) technologies, genomics applications are becoming increasingly valuable and even essential...... at the forefront of foodborne pathogen genomics research....

Spatial Dynamics of Technological Evolution: Technological Relatedness as Driver for Radical Emerging Technologies

DEFF Research Database (Denmark)

Tanner, Anne Nygaard

and applied knowledge in firms, universities, research institutes etc., and 2) the existence of risk-taking actors who are willing and capable of implementing and exploiting radical technologies. This paper focuses on the former. Where evolutionary economics have been occupied by accumulation of knowledge......Despite the consent of the fundamental role technological change plays for economic growth, it seems that little attention has been paid to how new technologies come into being. In particular, an understanding of the spatial and dynamic processes driving the emergence of radical technology...... is lacking. This paper seeks to fill out this research gap by bridging the school of evolutionary economics and the school of economic geography. Following Dosi (1988) two factors are in particular important for technological change in emerging technological paradigms: 1) accumulation of scientific...

Chemically Dissected Rotation Curves of the Galactic Bulge from Main-sequence Proper Motions

Science.gov (United States)

Clarkson, William I.; Calamida, Annalisa; Sahu, Kailash C.; Brown, Thomas M.; Gennaro, Mario; Avila, Roberto J.; Valenti, Jeff; Debattista, Victor P.; Rich, R. Michael; Minniti, Dante; Zoccali, Manuela; Aufdemberge, Emily R.

2018-05-01

We report results from an exploratory study implementing a new probe of Galactic evolution using archival Hubble Space Telescope imaging observations. Precise proper motions are combined with photometric relative metallicity and temperature indices, to produce the proper-motion rotation curves of the Galactic bulge separately for metal-poor and metal-rich main-sequence samples. This provides a “pencil-beam” complement to large-scale wide-field surveys, which to date have focused on the more traditional bright giant branch tracers. We find strong evidence that the Galactic bulge rotation curves drawn from “metal-rich” and “metal-poor” samples are indeed discrepant. The “metal-rich” sample shows greater rotation amplitude and a steeper gradient against line-of-sight distance, as well as possibly a stronger central concentration along the line of sight. This may represent a new detection of differing orbital anisotropy between metal-rich and metal-poor bulge objects. We also investigate selection effects that would be implied for the longitudinal proper-motion cut often used to isolate a “pure-bulge” sample. Extensive investigation of synthetic stellar populations suggests that instrumental and observational artifacts are unlikely to account for the observed rotation curve differences. Thus, proper-motion-based rotation curves can be used to probe chemodynamical correlations for main-sequence tracer stars, which are orders of magnitude more numerous in the Galactic bulge than the bright giant branch tracers. We discuss briefly the prospect of using this new tool to constrain detailed models of Galactic formation and evolution. Based on observations made with the NASA/ESA Hubble Space Telescope and obtained from the data archive at the Space Telescope Science Institute. STScI is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555.

SGN multipurpose dry storage technology applied to the Italian situation

International Nuclear Information System (INIS)

Giorgio, M.; Lanza, R.

1999-01-01

SGN has gained considerable experience in the design and construction of interim storage facilities for spent fuel and various nuclear waste, and can therefore propose single product and multipurpose facilities capable of accommodating all types of waste in a single structure. The pooling of certain functions (transport cask reception, radiation protection) and the choice of optimized technologies to answer the specific needs of clients (transfer of nuclear packages by shielded handling cask or nuclearized crane), the use of the same type of storage pit to cool the heat releasing packages (vitrified nuclear waste, fuel elements) makes it possible to propose industrially proven and cost-effective solutions. Studies carried out for the Dutch company COVRA (HABOG facility currently under implementation phase) provide an example of a multipurpose dry storage facility designed to store spent fuel, vitrified reprocessing waste, cemented hulls and end-pieces, cemented technological waste and bituminized waste from fuel reprocessing, i e. high level waste and intermediate level wastes. The study conducted by SGN and GENESI (an Italian consortium formed by Ansaldo's Nuclear Division and Fiat Avio), on behalf of the Italian utility ENEL, offers another example of the multipurpose dry storage facility designed to store in a centralised site all the remaining irradiated fuel elements plus the vitrified waste. This paper presents SGN's experience through a short description of reference storage facilities for various types of products (HLW and spent fuel). It continues with the typical application to the Italian situation to show how these proven technologies are combined to obtain multipurpose facilities tailored to the client's specific requirements. (author)

Soil treatment technologies combined

International Nuclear Information System (INIS)

Davis, K.J.; Russell, D.J.

1993-01-01

The Superfund Amendments and Reauthorization Act (SARA) presents a legislative mandate to select effective and long-term remediation options. SARA has spurred the development of innovative technologies and other remedial alternatives that can be applied to the diverse contaminated media at hazardous waste sites. Even though many treatment technologies have been investigated for use at hazardous waste sites, only a few have been used successfully. Soil vapor extraction and soil composting have achieved cleanup goals at sites with soils contaminated with solvents, aromatic hydrocarbons and petroleum derivatives. With the increased use of innovative on-site technologies, the integration of multiple technologies to remediate sites with complex contaminants becomes a viable and cost-effective remedial alternative. Soil vapor extraction and composting have been applied successfully as individual technologies at hazardous waste sites. An integration of these two technologies also has been used to remediate a complex contaminated site

Can we make sense of the notion of trustworthy technology?

NARCIS (Netherlands)

Nickel, P.J.; Franssen, M.P.M.; Kroes, P.A.

2010-01-01

In this paper we raise the question whether technological artifacts can properly speaking be trusted or said to be trustworthy. First, we set out some prevalent accounts of trust and trustworthiness and explain how they compare with the engineer’s notion of reliability. We distinguish between pure

Can We Make Sense of the Notion of Trustworthy Technology?

NARCIS (Netherlands)

Nickel, P.J.; Franssen, M.P.M.; Kroes, P.

2010-01-01

In this paper we raise the question whether technological artifacts can properly speaking be trusted or said to be trustworthy. First, we set out some prevalent accounts of trust and trustworthiness and explain how they compare with the engineer’s notion of reliability. We distinguish between pure

Application of low cost technology for the management of irrgation in organic orchads

Science.gov (United States)

Horcajo, Daniel; Patrícia Prazeres Marques, Karina; Rodríguez Sinobas, Leonor

2014-05-01

Throughout history, humans have cyclically return to their old traditions such as the organic orchards. Nowadays, these have been integrated into the modern cities and could supply fresh vegetables to the daily food improving human health. Organic orchards grow crops without pesticides and artificial fertilizers thus, they are respectful with the environment and guarantee the food's safety . In modern society, the application of new technology is a must, in this case to obtain an efficient irrigation. In order to monitor a proper irrigation and save water and energy, soil water content probes are used to measure soil water content. Among them, capacitive probes ,monitored with a specific data logger, are typically used. Most of them, specially the data loggers, are expensive and in many cases are not used. In this work, we have applied the open hardware Arduino to build and program a low cost datalogger for the programming of irrigation in an experimental organic orchard. Results showed that the application of such as low cost technology, which is easily available in the market and easy to understand, everyone can built and program its own device helping in managing water resources in organic orchards .

Decision Analysis Science Modeling for Application and Fielding Selection Applied to Concrete Decontamination Technologies

International Nuclear Information System (INIS)

Ebadian, M.A.; Ross, T.L.

1998-01-01

Concrete surfaces contaminated with radionuclides present a significant challenge during the decontamination and decommissioning (D and D) process. As structures undergo D and D, coating layers and/or surface layers of the concrete containing the contaminants must be removed for disposal in such a way as to present little to no risk to human health or the environment. The selection of a concrete decontamination technology that is safe, efficient, and cost-effective is critical to the successful D and D of contaminated sites. To support U.S. Department of Energy (DOE) Environmental Management objectives and to assist DOE site managers in the selection of the best-suited concrete floor decontamination technology(s) for a given site, two innovative and three baseline technologies have been assessed under standard, non-nuclear conditions at the Hemispheric Center for Environmental Technology (HCET) at Florida International University (FIU). The innovative technologies assessed include the Pegasus Coating Removal System and Textron's Electro-Hydraulic Scabbling System. The three baseline technologies assessed include: the Wheelabrator Blastrac model 1-15D, the NELCO Porta Shot Blast trademark model GPx-1O-18 HO Rider, and the NELCO Porta Shot Blasttrademark model EC-7-2. These decontamination technology assessments provide directly comparable performance data that have previously been available for only a limited number of technologies under restrictive site-specific constraints. Some of the performance data collected during these technology assessments include: removal capability, production rate, removal gap, primary and secondary waste volumes, and operation and maintenance requirements. The performance data generated by this project is intended to assist DOE site managers in the selection of the safest, most efficient, and cost-effective decontamination technologies to accomplish their remediation objectives

Special issue - Applying the accelerator

International Nuclear Information System (INIS)

Anon.

1995-01-01

T'he CERN Courier is the international journal of high energy physics, covering current developments in and around this branch of basic science. A recurrent theme is applying the technology developed for particle accelerators, the machines which produce beams of high energy particles for physics experiments. Twentieth-century science is full of similar examples of applications derived from pure research. This special issue of the CERN Courier is given over to one theme - the applications of accelerators. Accelerator systems and facilities are normally associated with highenergy particle physics research, the search for fundamental particles and the quest to understand the physics of the Big Bang. To the layman, accelerator technology has become synonymous with large and expensive machines, exploiting the most modern technology for basic research. In reality, the range of accelerators and their applications is much broader. A vast number of accelerators, usually much smaller and operating for specific applications, create wealth and directly benefit the population, particularly in the important areas of healthcare, energy and the environment. There are well established applications in diagnostic and therapeutic medicine for research and routine clinical treatments. Accelerators and associated technologies are widely employed by industry for manufacturing and process control. In fundamental and applied research, accelerator systems are frequently used as tools. The biennial conference on the Applications of Accelerators in Industry and Research at Denton, Texas, attracts a thousand participants. This special issue of the CERN Courier includes articles on major applications, reflecting the diversity and value of accelerator technology. Under Guest Editor Dewi Lewis of Amersham International, contributions from leading international specialists with experience of the application end of the accelerator chain describe their fields of direct interest. The

Special issue - Applying the accelerator

Energy Technology Data Exchange (ETDEWEB)

Anon.

1995-07-15

T'he CERN Courier is the international journal of high energy physics, covering current developments in and around this branch of basic science. A recurrent theme is applying the technology developed for particle accelerators, the machines which produce beams of high energy particles for physics experiments. Twentieth-century science is full of similar examples of applications derived from pure research. This special issue of the CERN Courier is given over to one theme - the applications of accelerators. Accelerator systems and facilities are normally associated with highenergy particle physics research, the search for fundamental particles and the quest to understand the physics of the Big Bang. To the layman, accelerator technology has become synonymous with large and expensive machines, exploiting the most modern technology for basic research. In reality, the range of accelerators and their applications is much broader. A vast number of accelerators, usually much smaller and operating for specific applications, create wealth and directly benefit the population, particularly in the important areas of healthcare, energy and the environment. There are well established applications in diagnostic and therapeutic medicine for research and routine clinical treatments. Accelerators and associated technologies are widely employed by industry for manufacturing and process control. In fundamental and applied research, accelerator systems are frequently used as tools. The biennial conference on the Applications of Accelerators in Industry and Research at Denton, Texas, attracts a thousand participants. This special issue of the CERN Courier includes articles on major applications, reflecting the diversity and value of accelerator technology. Under Guest Editor Dewi Lewis of Amersham International, contributions from leading international specialists with experience of the application end of the accelerator chain describe their fields of direct interest. The contributions

Information technologies in radioactive waste management, applied in NPP-Kozloduy, Bulgaria

International Nuclear Information System (INIS)

Jeliazkov, J.; Jeliazkova, L.; Atanasov, Sv.

1994-01-01

Radioactive waste (RAW) management in NPP is a complex problem, that can be considered as a combination of sub problems, for example scientific, administrative, social, economical, etc. The separate examination of these sub problems does not lead to creation of overall system for optimal RAW management. There's no doubt that such an administrative system, supported by information technologies, should present in every one existing and planned nuclear power plant to optimize its operation as a whole, not only separate elements. The aim is to avoid the fallacy of the single and the complex. This paper presents a basic part of the whole information management system as defined above that concerns RAW management. The information management system is prepared for NPP-Kozloduy, Bulgaria by means of modern concepts and technological schemes and is aimed to help the administrative personnel in this very important activity - RAW management. On the base of objective data about the available waste and prognoses about arisings in the future, on the base of chosen technologies and equipment the system gives multi-variant plan for treatment, processing and disposal of waste, after the choice of a variant it monitors its application in the practice

Comparing Waste-to-Energy technologies by applying energy system analysis

DEFF Research Database (Denmark)

Münster, Marie; Lund, Henrik

2010-01-01

Even when policies of waste prevention, re-use and recycling are prioritised a fraction of waste will still be left which can be used for energy recovery. This article asks the question: How to utilise waste for energy in the best way seen from an energy system perspective? Eight different Waste......-to-Energy technologies are compared with a focus on fuel efficiency, CO2 reductions and costs. The comparison is carried out by conducting detailed energy system analyses of the present as well as a potential future Danish energy system with a large share of combined heat and power as well as wind power. The study shows...... potential of using waste for the production of transport fuels. Biogas and thermal gasification technologies are hence interesting alternatives to waste incineration and it is recommended to support the use of biogas based on manure and organic waste. It is also recommended to support research...

Introduction to Pinch Technology

DEFF Research Database (Denmark)

Rokni, Masoud

? How to put energy efficiency and other targets like reducing emissions, increasing plant capacities, improve product qualities etc, into a one coherent strategic plan for the overall site? All these questions and more can be answered with a full understanding of Pinch Technology and an awareness...... of the available tools for applying it in a practical way. The aim here is to provide the basic knowledge of pinch technology concept and how it can be applied across a wide range of process industries. The pinch technology was proposed firstly for optimization of heat exchangers and therefore it is introduced...

Deployment Effects of Marine Renewable Energy Technologies: Wave Energy Scenarios

Energy Technology Data Exchange (ETDEWEB)

Mirko Previsic

2010-06-17

Given proper care in siting, design, deployment, operation and maintenance, wave energy conversion could become one of the more environmentally benign sources of electricity generation. In order to accelerate the adoption of these emerging hydrokinetic and marine energy technologies, navigational and environmental concerns must be identified and addressed. All developing hydrokinetic projects involve a wide variety of stakeholders. One of the key issues that site developers face as they engage with this range of stakeholders is that, due to a lack of technical certainty, many of the possible conflicts (e.g., shipping and fishing) and environmental issues are not well-understood,. In September 2008, re vision consulting, LLC was selected by the Department of Energy (DoE) to apply a scenario-based assessment to the emerging hydrokinetic technology sector in order to evaluate the potential impact of these technologies on the marine environment and navigation constraints. The project’s scope of work includes the establishment of baseline scenarios for wave and tidal power conversion at potential future deployment sites. The scenarios capture variations in technical approaches and deployment scales to properly identify and characterize environmental effects and navigational effects. The goal of the project is to provide all stakeholders with an improved understanding of the potential range of technical attributes and potential effects of these emerging technologies and focus all stakeholders on the critical issues that need to be addressed. By identifying and addressing navigational and environmental concerns in the early stages of the industry’s development, serious mistakes that could potentially derail industry-wide development can be avoided. This groundwork will also help in streamlining siting and associated permitting processes, which are considered key hurdles for the industry’s development in the U.S. today. Re vision is coordinating its efforts with two

The c-index is not proper for the evaluation of $t$-year predicted risks.

Science.gov (United States)

Blanche, Paul; Kattan, Michael W; Gerds, Thomas A

2018-02-16

We show that the widely used concordance index for time to event outcome is not proper when interest is in predicting a $t$-year risk of an event, for example 10-year mortality. In the situation with a fixed prediction horizon, the concordance index can be higher for a misspecified model than for a correctly specified model. Impropriety happens because the concordance index assesses the order of the event times and not the order of the event status at the prediction horizon. The time-dependent area under the receiver operating characteristic curve does not have this problem and is proper in this context.

The effects of applying information technology on job empowerment dimensions

Science.gov (United States)

Ajami, Sima; Arab-Chadegani, Raziyeh

2014-01-01

Information Technology (IT) is known as a valuable tool for information dissemination. Today, information communication technology can be used as a powerful tool to improve employees’ quality and efficiency. The increasing development of technology-based tools and their adaptation speed with human requirements has led to a new form of the learning environment and creative, active and inclusive interaction. These days, information is one of the most important power resources in every organization and accordingly, acquiring information, especially central or strategic one can help organizations to build a power base and influence others. The aim of this study was to identify the most important criteria in job empowerment using IT and also the advantages of assessing empowerment. This study was a narrative review. The literature was searched on databases and journals of Springer, Proquest, PubMed, science direct and scientific information database) with keywords including IT, empowerment and employees in the searching areas of titles, keywords, abstracts and full texts. The preliminary search resulted in 85 articles, books and conference proceedings in which published between 1983 and 2013 during July 2013. After a careful analysis of the content of each paper, a total of 40 papers and books were selected based on their relevancy. According to Ardalan Model IT plays a significant role in the fast data collection, global and fast access to a broad range of health information, a quick evaluation of information, better communication among health experts and more awareness through access to various information sources. IT leads to a better performance accompanied by higher efficiency in service providing all of which will cause more satisfaction from fast and high-quality services. PMID:25250350

[Advances of NIR spectroscopy technology applied in seed quality detection].

Science.gov (United States)

Zhu, Li-wei; Ma, Wen-guang; Hu, Jin; Zheng, Yun-ye; Tian, Yi-xin; Guan, Ya-jing; Hu, Wei-min

2015-02-01

Near infrared spectroscopy (NIRS) technology developed fast in recent years, due to its rapid speed, less pollution, high-efficiency and other advantages. It has been widely used in many fields such as food, chemical industry, pharmacy, agriculture and so on. The seed is the most basic and important agricultural capital goods, and seed quality is important for agricultural production. Most methods presently used for seed quality detecting were destructive, slow and needed pretreatment, therefore, developing one kind of method that is simple and rapid has great significance for seed quality testing. This article reviewed the application and trends of NIRS technology in testing of seed constituents, vigor, disease and insect pests etc. For moisture, starch, protein, fatty acid and carotene content, the model identification rates were high as their relative contents were high; for trace organic, the identification rates were low as their relative content were low. The heat-damaged seeds with low vigor were discriminated by NIRS, the seeds stored for different time could also been identified. The discrimination of frost-damaged seeds was impossible. The NIRS could be used to identify health and infected disease seeds, and did the classification for the health degree; it could identify parts of the fungal pathogens. The NIRS could identify worm-eaten and health seeds, and further distinguished the insect species, however the identification effects for small larval and low injury level of insect pests was not good enough. Finally, in present paper existing problems and development trends for NIRS in seed quality detection was discussed, especially the single seed detecting technology which was characteristic of the seed industry, the standardization of its spectral acquisition accessories will greatly improve its applicability.

The effects of applying information technology on job empowerment dimensions.

Science.gov (United States)

Ajami, Sima; Arab-Chadegani, Raziyeh

2014-01-01

Information Technology (IT) is known as a valuable tool for information dissemination. Today, information communication technology can be used as a powerful tool to improve employees' quality and efficiency. The increasing development of technology-based tools and their adaptation speed with human requirements has led to a new form of the learning environment and creative, active and inclusive interaction. These days, information is one of the most important power resources in every organization and accordingly, acquiring information, especially central or strategic one can help organizations to build a power base and influence others. The aim of this study was to identify the most important criteria in job empowerment using IT and also the advantages of assessing empowerment. This study was a narrative review. The literature was searched on databases and journals of Springer, Proquest, PubMed, science direct and scientific information database) with keywords including IT, empowerment and employees in the searching areas of titles, keywords, abstracts and full texts. The preliminary search resulted in 85 articles, books and conference proceedings in which published between 1983 and 2013 during July 2013. After a careful analysis of the content of each paper, a total of 40 papers and books were selected based on their relevancy. According to Ardalan Model IT plays a significant role in the fast data collection, global and fast access to a broad range of health information, a quick evaluation of information, better communication among health experts and more awareness through access to various information sources. IT leads to a better performance accompanied by higher efficiency in service providing all of which will cause more satisfaction from fast and high-quality services.

Technology Catalogue. First edition

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

The Department of Energy`s Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM`s Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM`s Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department`s clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD`s applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina).

Improving the Occupational Skills of Students with Intellectual Disability by Applying Video Prompting Combined with Dance Pads

Science.gov (United States)

Lin, Mei-Lan; Chiang, Ming-Shan; Shih, Ching-Hsiang; Li, Meng-Fang

2018-01-01

Background: Individuals with intellectual disability (ID) are prone to inattention, are slow in learning and reaction, and have deficits in memory skills. Providing proper vocational education and training for individuals with intellectual disability is able to enhance their occupational skills. Materials and Methods: This study applied video…

Smart Power: New power integrated circuit technologies and their applications

Science.gov (United States)

Kuivalainen, Pekka; Pohjonen, Helena; Yli-Pietilae, Timo; Lenkkeri, Jaakko

1992-05-01

Power Integrated Circuits (PIC) is one of the most rapidly growing branches of the semiconductor technology. The PIC markets has been forecast to grow from 660 million dollars in 1990 to 1658 million dollars in 1994. It has even been forecast that at the end of the 1990's the PIC markets would correspond to the value of the whole semiconductor production in 1990. Automotive electronics will play the leading role in the development of the standard PIC's. Integrated motor drivers (36 V/4 A), smart integrated switches (60 V/30 A), solenoid drivers, integrated switch-mode power supplies and regulators are the latest standard devices of the PIC manufactures. ASIC (Application Specific Integrated Circuits) PIC solutions are needed for the same reasons as other ASIC devices: there are no proper standard devices, a company has a lot of application knowhow, which should be kept inside the company, the size of the product must be reduced, and assembly costs are wished to be reduced by decreasing the number of discrete devices. During the next few years the most probable ASIC PIC applications in Finland will be integrated solenoid and motor drivers, an integrated electronic lamp ballast circuit and various sensor interface circuits. Application of the PIC technologies to machines and actuators will strongly be increased all over the world. This means that various PIC's, either standard PIC's or full custom ASIC circuits, will appear in many products which compete with the corresponding Finnish products. Therefore the development of the PIC technologies must be followed carefully in order to immediately be able to apply the latest development in the smart power technologies and their design methods.

Economic issues of storage technologies in different applications

International Nuclear Information System (INIS)

Beurskens, L.W.M.; De Noord, M.

2004-09-01

For evaluating energy storage technologies, economical parameters are of considerable importance. A qualitative assessment is given of storage technologies in general, contributing to success or failure of their use. Based on data of nine storage technologies that are defined in the INVESTIRE Network (Investigation on storage technologies for intermittent renewable energies: evaluation and recommended R and D strategy), results of a quantitative cost analysis are presented, based on device-specific key parameters. The costs have been defined as additional costs, effected by the required investments and operation and maintenance expenditures, the efficiency of a device and its lifetime. In order to compare the technologies properly, categories of typical use have been defined, ranging from stand-alone small applications (typical storage capacity of 0.1 kWh) to levelling of power production (approximately 1 MWh). The outcome is presented in such a way that for each category of typical use, the best technological options are identified, based on a cost analysis

Towards the Proper Integration of Extra-Functional Requirements

Directory of Open Access Journals (Sweden)

Elke Hochmuller

1999-05-01

Full Text Available In spite of the many achievements in software engineering, proper treatment of extra-functional requirements (also known as non-functional requirements within the software development process is still a challenge to our discipline. The application of functionality-biased software development methodologies can lead to major contradictions in the joint modelling of functional and extra-functional requirements. Based on a thorough discussion on the nature of extra-functional requirements as well as on open issues in coping with them, this paper emphasizes the role of extra-functional requirements in the software development process. Particularly, a framework supporting the explicit integration of extra functional requirements into a conventional phase-driven process model is proposed and outlined.

Applying Technology to Inquiry-Based Learning in Early Childhood Education