WorldWideScience

Sample records for technology projected results

  1. Green technology foresight of products and materials - some reflections and results from an ongoing Danish project

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Pedersen, Thomas Thoning; Falch, Morten

    2005-01-01

    The article presents some methodological and theoretical reflections and some preliminary results from a Danish Green Technology Foresight project about environmental friendly products and materials, where the environmental potentials and risks from three technology areas are analysed: nano- bio...

  2. Variable conductance heat pipe technology. [research project resulting in heat pipe experiment on OAO-3 satellite

    Science.gov (United States)

    Anderson, W. T.; Edwards, D. K.; Eninger, J. E.; Marcus, B. D.

    1974-01-01

    A research and development program in variable conductance heat pipe technology is reported. The project involved: (1) theoretical and/or experimental studies in hydrostatics, (2) hydrodynamics, (3) heat transfer into and out of the pipe, (4) fluid selection, and (5) materials compatibility. The development, fabrication, and test of the space hardware resulted in a successful flight of the heat pipe experiment on the OAO-3 satellite. A summary of the program is provided and a guide to the location of publications on the project is included.

  3. Enabling technologies for space exploration systems: The STEPS project results and perspectives

    Science.gov (United States)

    Messidoro, Piero; Perino, Maria Antonietta; Boggiatto, Dario

    2013-05-01

    The project STEPS (Sistemi e Tecnologie per l'EsPlorazione Spaziale) is a joint development of technologies and systems for Space Exploration supported by Regione Piemonte, the European Regional Development Fund (E.R.D.F.) 2007-2013, Thales Alenia Space Italia (TAS-I), SMEs, Universities and public Research Centres belonging to the network "Comitato Distretto Aerospaziale del Piemonte" the Piedmont Aerospace District (PAD) in Italy. The project first part terminated in May 2012 with a final demonstration event that summarizes the technological results of research activities carried-out during a period the three years and half. The project developed virtual and hardware demonstrators for a range of technologies for the descent, soft landing and surface mobility of robotic and manned equipment for Moon and Mars exploration. The two key hardware demonstrators—a Mars Lander and a Lunar Rover—fit in a context of international cooperation for the exploration of Moon and Mars, as envisaged by Space Agencies worldwide. The STEPS project included also the development and utilization of a system of laboratories equipped for technology validation, teleoperations, concurrent design environments, and virtual reality simulation of the Exploration Systems in typical Moon and Mars environments. This paper presents the reached results in several technology domains like: vision-based GNC for the last portion of Mars Entry, Descent and Landing sequence, Hazard avoidance and complete spacecraft autonomy; Autonomous Rover Navigation, based on the determination of the terrain morphology by a stereo camera; Mobility and Mechanisms providing an Integrated Ground Mobility System, Rendezvous and Docking equipment, and protection from Environment effects; innovative Structures such as Inflatable, Smart and Multifunction Structures, an Active Shock Absorber for safe landing, balance restoring and walking; Composite materials Modelling and Monitoring; Human-machine interface features of a

  4. Single-photon sources for quantum technologies - Results of the joint research project SIQUTE

    DEFF Research Database (Denmark)

    Kück, S.; López, M.; Rodiek, B.

    2017-01-01

    In this presentation, the results of the joint research project “Single-Photon Sources for Quantum Technologies” (SIQUTE) [1] will be presented. The focus will be on the development of absolutely characterized single-photon sources, on the realization of an efficient waveguide-based single-photon...

  5. Results of expert response when forming an exhaustive list of potential risks of constructions projects using energy efficient technologies

    Directory of Open Access Journals (Sweden)

    Ryzhkova Anastasiya Igorevna

    2016-10-01

    Full Text Available The author deals with the most widely used methods of risk events identification. The expert response method is most applicable for construction projects using energy efficient technologies. The article presents the results of an opinion poll of the professional expert community using expert response method, which is aimed to identify the most likely potential “pure” risk of construction projects with energy-efficient technologies in use. 74 experts representing different levels of the construction process were polled: customers and directors of construction companies, project managers, risk managers, advisors. The answers were collected during private talks and also using a special website Survey Monkey. Experts from different countries took part: Russia, Great Britain, Austria, Luxemburg, Switzerland and Norway. Also the article presents the expert evaluation of the “effect” of risk implementation on the cost of a project, implementation time, the product quality, the environment and safety on the construction site.

  6. Energy+ pumps - Technology procurement for very energy efficient circulation pumps, first results of the current IEE-project

    Energy Technology Data Exchange (ETDEWEB)

    Barthel, Claus; Thomas, Stefan [Wuppertal Inst. for Climate, Environment, Energy (Germany); Benke, Georg; Schaeppi, Bernd [Austrian Energy Agency A.E.A (Austria); Forfori, Fabio [Politecnico di Milano, Dept. di Energetica (Italy); Guisson, Ruben [Flemisch Inst. for technological research (Vito) (Belgium); Papamikrouli, Louiza [Centre for Renewable Energy Sources (CRES) (Greece); Puente, Margarita [ESCAN, S.A. (Spain); Spirek, Tomas [SEVEn, Stredisko pro efektivni vyuzivani energie, o.p.s. (Czech Republic); Rautiainen, Kimmo [Motiva Oy (Finland); Koehl, Joerg [Deutsche Energie-Agentur GmbH (Germany); Anglade, Alain [ADEME (France); Nipkow, Juerg [ARENA (Switzerland)

    2007-07-01

    About 2 % of the overall electricity consumption of the EU is caused by circulators in single or double family homes and flats. A new technology of pumps with electronically commutated (EC) motor pumps is available now; it is one possible way to achieve a reduction in circulator annual electricity use by 60 % or more.The project's objective is a market transformation towards this new very energy-efficient pump technologies - Energy+ pumps - for circulators in heating systems, both stand alone and integrated in boilers. Only few manufacturers have so far introduced the new pump technology to the market for single or double family homes and flats.To bring more products to the market from all major manufacturers, the project will adapt and apply the technology procurement methodology as it was very successfully tested in the European Energy+ project on energy-efficient cold appliances [5] [6]. Large buyers will be aggregated, to activate the pump and boiler manufacturers. Sales and training materials and a sizing spreadsheet software for installation contractors will be developed and applied. A competition both for energy-efficient products and marketing campaigns will be organised and the information on the Energy+ pumps will be disseminated widely through website, newsletter, media, and fairs.This paper gives a short overview of this project and presents the results of the first project phases: a European wide market study on circulators and heating systems, and the first Energy+ lists for circulators, buyers and supporters.

  7. GAUSS Project Trials Results

    Science.gov (United States)

    Di Fazio, Antonella; Vernucci, Antonio; Rossini, Eugenio

    2003-07-01

    , specifically operating in inland- waterways and roads. Safety-of-life applications for assisted vessel navigation and for management of hazardous goods (gas) transhipment over the Po river were thoroughly tested and assessed. Applications for emergency assistance, Point of Interest inquiry, localisation of commercial fleet were also proven.GAUSS successfully demonstrated integrated GNSS1 precise positioning based on EGNOS and satellite UMTS packet communication. The new technology with respect to the current state-of the art, developed within the project, was validated during the trial campaign, including the implemented broadcasting and multicasting communication of data packet compliant to 3GPP standard (current release 4). Horizontal accuracy better than 3-m was achieved in the trial area (Northern Italy - Lario - Como Lake, Parma and Po river areas), thanks to the navigation functions based on GPS signals augmented with SBAS techniques. The MTB (Mediterranean Test Bed) was utilised because of the poor performance coverage of the ESTB system over the Italian regions.In this paper, the results of the GAUSS trial campaign are reported, along with their assessment and evaluation in terms of possible enhancements and future exploitations.

  8. Ceramic Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

  9. It's TIME for Technology: The Technology in Mathematics Education Project

    Science.gov (United States)

    Hardy, Michael

    2008-01-01

    This article describes the impact that the Technology in Mathematics Education (TIME) Project had on participating middle level and secondary mathematics teachers' preparedness to teach through technology. Results indicate that the TIME Project positively impacted participants' perceptions of their knowledge of technological resources and methods…

  10. [SENTIERI Project: results].

    Science.gov (United States)

    Crocetti, Emanuele; Pirastu, Roberta; Buzzoni, Carlotta; Minelli, Giada; Manno, Valerio; Bruno, Caterina; Fazzo, Lucia; Iavarone, Ivano; Pasetto, Roberto; Ricci, Paolo; Zona, Amerigo; Conti, Susanna; Comba, Pietro

    2014-01-01

    Of the 18 National Priority Contaminated Sites (NPCSs) analysed in this Report, some have a single source of environmental contamination (such as fluoro-edenite in Biancavilla). In most cases, however, we are looking at multiple heterogeneous sources of contamination. In this respect, the a priori causal evaluation of the association between diseases and environmental exposures in NPCSs, based on epidemiological evidence, can help trace the health impact back to specific types of environmental exposure. There are several cases in which the project's findings have been consistent with a priori evidence: stomach cancer (both genders, excess cancer incidence) in the Fidenza NPCS; stomach cancer (women, excess mortality, cancer incidence and hospital discharges) in the Laguna di Grado e Marano NPCS; excess hospitalisation from respiratory diseases in Brescia-Caffaro, Milazzo and Terni Papigno NPCSs; excesses for non-Hodgkin lymphomas and melanoma (incidence and hospitalisation in men and women) and breast cancer (incidence and hospital discharges, women) in Brescia-Caffaro NPCS. In preorder to properly evaluate the population's health profile, we must also observe whether results remain consistent for all three health outcomes or in both genders. The first is the case of excess mortality, cancer incidence and hospital discharges for bladder cancer (men) in Porto Torres and diseases of the urinary tract in the Basso bacino del fiume Chienti NPCS). Gender consistency is observed, for instance, for all cancer in Bolzano, Porto Torres, Venice, Litorale Domizio Flegreo, Priolo, and Taranto, for all causes in Taranto, Litorale Domizio Flegreo and Trieste. The health impact in the various NPCSs needs to be considered carefully and used as a springboard for further analytical research that could confirm and explain causal links to specific environmental exposures. The observations can, however, already be considered as a basis for mandatory primary prevention measures.

  11. Information technology project management

    National Research Council Canada - National Science Library

    Schwalbe, Kathy

    2014-01-01

    ... (IT) projects that extend well beyond standard project management requirements. No book offers more up-to-the minute insights and software tools for IT project management success, including updates that reflect the latest PMBOKʼ...

  12. Information technology project management

    National Research Council Canada - National Science Library

    Schwalbe, Kathy

    2014-01-01

    ... (IT) projects that extend well beyond standard project management requirements. No book offers more up-to-the minute insights and software tools for IT project management success, including updates that reflect the latest PMBOK...

  13. Transformational Tools and Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Transformational Tools and Technologies (TTT) Project advances state-of-the-art computational and experimental tools and technologies that are vital to aviation...

  14. Fundamentals of technology project management

    CERN Document Server

    Garton, Colleen

    2012-01-01

    Designed to provide software engineers, students, and IT professionals with an understanding of the fundamentals of project management in the technology/IT field, this book serves as a practical introduction to the subject. Updated with information on how Fundamentals of Project Management integrates with and complements Project Management Institute''s Project Management Body of Knowledge, this collection explains fundamental methodologies and techniques while also discussing new technology, tools, and virtual work environments. Examples and case studies are based on technology projects, and t

  15. Technology Education Professional Enhancement Project

    Science.gov (United States)

    Hughes, Thomas A., Jr.

    1996-01-01

    The two goals of this project are: the use of integrative field of aerospace technology to enhance the content and instruction delivered by math, science, and technology teachers through the development of a new publication entitled NASA Technology Today, and to develop a rationale and structure for the study of technology, which establishes the foundation for developing technology education standards and programs of the future.

  16. [Earth Science Technology Office's Computational Technologies Project

    Science.gov (United States)

    Fischer, James (Technical Monitor); Merkey, Phillip

    2005-01-01

    This grant supported the effort to characterize the problem domain of the Earth Science Technology Office's Computational Technologies Project, to engage the Beowulf Cluster Computing Community as well as the High Performance Computing Research Community so that we can predict the applicability of said technologies to the scientific community represented by the CT project and formulate long term strategies to provide the computational resources necessary to attain the anticipated scientific objectives of the CT project. Specifically, the goal of the evaluation effort is to use the information gathered over the course of the Round-3 investigations to quantify the trends in scientific expectations, the algorithmic requirements and capabilities of high-performance computers to satisfy this anticipated need.

  17. Smart Gun Technology project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, D.R.

    1996-05-01

    The goal of the Smart Gun Technology project is to eliminate the capability of an unauthorized user form firing a law officer`s firearm by implementing user-recognizing-and-authorizing (or {open_quotes}smart{close_quotes}) surety technologies. This project was funded by the National Institute of Justice. This report lists the findings and results of the project`s three primary objectives. First, to find and document the requirements for a smart firearm technology that law enforcement officers will value. Second, to investigate, evaluate, and prioritize technologies that meet the requirements for a law enforcement officer`s smart firearm. Third, to demonstrate and document the most promising technology`s usefulness in models of a smart firearm.

  18. Additive Manufacturing Technology Development Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The 3D Printing In Zero-G (3D Print) technology demonstration project is a proof-of-concept test designed to assess the properties of melt deposition modeling...

  19. Photonics: Technology project summary

    Science.gov (United States)

    Depaula, Ramon P.

    1991-01-01

    Photonics involves the use of light (photons) in conjunction with electronics for applications in communications, computing, control, and sensing. Components used in photonic systems include lasers, optical detectors, optical wave guide devices, fiber optics, and traditional electronic devices. The goal of this program is to develop hybrid optoelectronic devices and systems for sensing, information processing, communications, and control. It is hoped that these new devices will yield at least an order of magnitude improvement in performance over existing technology. The objective of the program is to conduct research and development in the following areas: (1) materials and devices; (2) networking and computing; (3) optical processing/advanced pattern recognition; and (4) sensing.

  20. Photonics: Technology project summary

    Science.gov (United States)

    Depaula, Ramon P.

    1991-01-01

    Photonics involves the use of light (photons) in conjunction with electronics for applications in communications, computing, control, and sensing. Components used in photonic systems include lasers, optical detectors, optical wave guide devices, fiber optics, and traditional electronic devices. The goal of this program is to develop hybrid optoelectronic devices and systems for sensing, information processing, communications, and control. It is hoped that these new devices will yield at least an order of magnitude improvement in performance over existing technology. The objective of the program is to conduct research and development in the following areas: (1) materials and devices; (2) networking and computing; (3) optical processing/advanced pattern recognition; and (4) sensing.

  1. The Water Reuse project: Sustainable waste water re-use technologies for irrigated land in NIS and southern European states; project overview and results.

    Science.gov (United States)

    van den Elsen, E.; Doerr, S.; Ritsema, C. J.

    2009-04-01

    In irrigated areas in the New Independent States (NIS) and southern European States, inefficient use of conventional water resources occurs through incomplete wetting of soils, which causes accelerated runoff and preferential flow, and also through excessive evaporation associated with unhindered capillary rise. Furthermore, a largely unexploited potential exists to save conventional irrigation water by supplementation with organic-rich waste water, which, if used appropriately, can also lead to improvements to soil physical properties and soil nutrient and organic matter content. This project aims to (a) reduce irrigation water losses by developing, evaluating and promoting techniques that improve the wetting properties of soils, and (b) investigate the use of organic-rich waste water as a non-conventional water resource in irrigation and, in addition, as a tool in improving soil physical properties and soil nutrient and organic matter content. Key activities include (i) identifying, for the NIS and southern European partner countries, the soil type/land use combinations, for which the above approaches are expected to be most effective and their implementation most feasible, using physical and socio-economic research methods, and (ii) examining the water saving potential, physical, biological and chemical effects on soils of the above approaches, and also their impact on performance. Expected outputs include techniques for sustainable improvements in soil wettability management as a novel approach in water saving, detailed evaluation of the prospects and effects of using supplemental organic-rich waste waters in irrigation, an advanced process-based numerical hydrological model, fully adapted to quantify and upscale resulting water savings and nutrient and potential contaminant fluxes for irrigated areas, and identification of suitable areas in the NIS and Mediterranean (in soil, land use, legislative and socio-economic terms) for implementation.

  2. A Radiological Survey Approach to Use Prior to Decommissioning: Results from a Technology Scanning and Assessment Project Focused on the Chornobyl NPP

    Energy Technology Data Exchange (ETDEWEB)

    Milchikov, A.; Hund, G.; Davidko, M.

    1999-10-20

    The primary objectives of this project are to learn how to plan and execute the Technology Scanning and Assessment (TSA) approach by conducting a project and to be able to provide the approach as a capability to the Chernobyl Nuclear Power Plant (ChNPP) and potentially elsewhere. A secondary objective is to learn specifics about decommissioning and in particular about radiological surveying to be performed prior to decommissioning to help ChNPP decision makers. TSA is a multi-faceted capability that monitors and analyzes scientific, technical, regulatory, and business factors and trends for decision makers and company leaders. It is a management tool where information is systematically gathered, analyzed, and used in business planning and decision making. It helps managers by organizing the flow of critical information and provides managers with information they can act upon. The focus of this TSA project is on radiological surveying with the target being ChNPP's Unit 1. This reactor was stopped on November 30, 1996. At this time, Ukraine failed to have a regulatory basis to provide guidelines for nuclear site decommissioning. This situation has not changed as of today. A number of documents have been prepared to become a basis for a combined study of the ChNPP Unit 1 from the engineering and radiological perspectives. The results of such a study are expected to be used when a detailed decommissioning plan is created.

  3. Lightweight Gearbox Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To date, the majority of the gearboxes used on the rovers have been based on very conventional materials, process and designs. This has primarily been a result of...

  4. The Gunite Tanks Remediation Project at Oak Ridge National Laboratory; Successful Integration & Deployment of Technologies Results in Remediated Underground Storage Tanks

    Energy Technology Data Exchange (ETDEWEB)

    Billingsley, K.; Bolling, D.

    2002-02-27

    This paper presents an overview of the underground technologies deployed during the cleanup of nine large underground storage tanks (USTs) that contained residual radioactive sludge, liquid low-level waste (LLLW), and other debris. The Gunite Tanks Remediation Project at Oak Ridge National Laboratory (ORNL) was successfully completed in 2001, ending with the stabilization of the USTs and the cleanup of the South Tank Farm. This U.S. Department of Energy (DOE) project was the first of its kind completed in the United States of America. The Project integrated robotic and remotely operated technologies into an effective tank waste retrieval system that safely retrieved more than 348 m3 (92,000 gal) of radioactive sludge and 3.15E+15 Bq (85,000 Ci) of radioactive contamination from the tanks. The Project successfully transferred over 2,385 m3 (630,000 gal) of waste slurry to ORNL's active tank waste management system. The project team avoided over $120 Million in costs and shortened the original baseline schedule by over 10 years. Completing the Gunite Tanks Remediation Project eliminated the risks posed by the aging USTs and the waste they contained, and avoid the $400,000 annual costs associated with maintaining and monitoring the tanks.

  5. Projection display technologies for the new millennium

    Science.gov (United States)

    Kahn, Frederic J.

    2000-04-01

    Although analog CRTs continue to enable most of the world's electronic projection displays such as US consumer rear projection televisions, discrete pixel (digital) active matrix LCD and DLP reflective mirror array projectors have rapidly created large nonconsumer markets--primarily for business. Recent advances in image quality, compactness and cost effectiveness of digital projectors have the potential to revolutionize major consumer and entertainment markets as well. Digital penetration of the mainstream consumer projection TV market will begin in the hear 2000. By 2005 digital projection HDTVs could take the major share of the consumer HDTV projection market. Digital projection is expected to dominate both the consumer HDTV and the cinema market by 2010, resulting in potential shipments for all projection markets exceeding 10 M units per year. Digital projection is improving at a rate 10X faster than analog CRT projectors and 5X faster than PDP flat panels. Continued rapid improvement of digital projection is expected due to its relative immaturity and due to the wide diversity of technological improvements being pursued. Key technology enablers are the imaging panels, light sources and micro-optics. Market shares of single panel projectors, MEMs panels, LCOS panels and low T p-Si TFT LCD panel variants are expected to increase.

  6. Information Update Research Fellowship for International Young Scientists NSFC Announced Results of Preliminary Evaluation of Bilateral Cooperative Research Projects With Danish National Research Foundation NSFC Announced Results of Preliminary Evaluation of Bilateral Cooperative Research Projects with DFG News in Brief: NSFC set up Department of Medical Sciences NSFC Announced Approved Cooperative Projects With France and Germany NSFC Announced Results of Preliminary Evaluation of Bilateral Cooperative Research Projects With Academy of Finland NSFC Announced Application Guide for Cooperative Research Projects with K. T. Li Foundation NSFC Announced Results of Preliminary Evaluation of Bilateral Cooperative Research projects With Japan Science and Technology Agency NSFC Announced Application Guide for Cooperative Research Projects With Royal Society of Edinburgh for 2010 NSFC Announced a List of proved Cooperative Projects With Three International Organizations

    Science.gov (United States)

    2009-01-01

    Research Fellowship for International Young Scientists NSFC Announced Results of Preliminary Evaluation of Bilateral Cooperative Research Projects With Danish National Research Foundation NSFC Announced Results of Preliminary Evaluation of Bilateral Cooperative Research Projects with DFG News in Brief: NSFC set up Department of Medical Sciences NSFC Announced Approved Cooperative Projects With France and Germany NSFC Announced Results of Preliminary Evaluation of Bilateral Cooperative Research Projects With Academy of Finland NSFC Announced Application Guide for Cooperative Research Projects with K. T. Li Foundation NSFC Announced Results of Preliminary Evaluation of Bilateral Cooperative Research projects With Japan Science and Technology Agency NSFC Announced Application Guide for Cooperative Research Projects With Royal Society of Edinburgh for 2010 NSFC Announced a List of proved Cooperative Projects With Three International Organizations

  7. Scintilla European project, the successful research results

    Energy Technology Data Exchange (ETDEWEB)

    Sannie, G.; Kondrasov, V.; Corre, G.; Boudergui, K.; Perot, B.; Carasco, C.; Montemont, G. [Commissariat a l' energie atomique et aux energies alternatives, Saclay, Cadarache, Grenoble (France); Peerani, P.; Carrapico, C.; Tomanin, A.; Rosas, F.; Caviglia, M.; Eklund, G.; Tagziria, H. [European Commission, Joint Research Centre, ITU, Nuclear Security Unit, Ispra (Italy); Friedrich, H.; Chmel, S. [Fraunhofer-Institut fuer Naturwissenschaftlich - Technische Trendanalysen - INT, Euskirchen (Germany); De Vita, R.; Manchini, E.; Pavan, M. [Istituto Nazionale di Fisica Nucleare, Sezione di Genova, Genova (Italy); Grattarola, M.; Botta, E. [Ansaldo Nucleare S.P.A, Genova (Italy); Kovacs, A.; Lakosi, L. [Hungarian Academy of Sciences, Centre for Energy Research, Budapest (Hungary); Baumhauer, C.; Deheuninck, T.; Haddad, E. [ARTTIC, Paris (France); Petrossian, G.; Ferragut, A. [SAPHYMO, Massy (France); Dermody, G.; Crossingham, G. [Symetrica Security Ltd, Southampton (United Kingdom)

    2015-07-01

    The Scintilla FP7 project is ended in December 2014, the fruitful results of 3 years development and tests will be presented. SCINTILLA offers the capacity to finding a reliable alternative to Helium-3 based detection systems since the gas which is predominantly used in nuclear safeguards and security applications has now become very expensive, rare and nearly unavailable. SCINTILLA benchmarks results are based on international standards. Radiation Portal tests were carried out at the Joint Research Centre (JRC) in Ispra (Italy). The scintilla project addresses few mains issues. The first is to develop neutron detectors for Radiation Portal Monitor (RPM) and the second is the need of new wearable integrated solutions for Spectrometric Personal Radiation Monitor (SPRM). The partners which provide technical systems of the scintilla project are INFN-ANSALDO, CEA, SYMETRICA and SAPHYMO. For RPM, the objective is to find reliable alternatives to Helium-3 historical neutron detector and provide technical solutions which cope with tests for reliable mobile and cost effective. For Spectrometric Personal Radiation Monitor (SPRM), SCINTILLA is innovating in technology areas that offer complementary capabilities for detecting and identifying gamma, Two CZT (Cadmium Zinc Telluride) addressing contexts of used by first responder technologies, one is a wearable detector and the second is a gamma camera complemented by advanced image processing technologies. (authors)

  8. Clean Coal Technology Programs: Completed Projects (Volume 2)

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2003-12-01

    Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  9. Photovoltaic concentrator technology development project. Sixth project integration meeting

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-10-01

    Thirty-three abstracts and short papers are presented which describe the current status of research, development, and demonstration of concentrator solar cell technology. Solar concentrators discussed include the parabolic trough, linear focus Fresnel lens, point focus Fresnel lens, and the parabolic dish. Solar cells studied include silicon, GaAs, and AlGaAs. Research on multiple junction cells, combined photovoltaic/thermal collectors, back contact solar cells, and beam splitter modules is described. Concentrator solar cell demonstration programs are reported. Contractor status summaries are given for 33 US DOE concentrator solar cell contracts; a description of the project, project status, and key results to date is included. (WHK)

  10. Project implementation start-up results of information technologies engineering for system risk assessment of Arctic region socio-economic development

    Directory of Open Access Journals (Sweden)

    Masloboev A. V.

    2016-06-01

    Full Text Available In this paper the start-up research and work-out results received under Russian Fund for Basic Research project execution № 15-29-06973 have been represented. The project is devoted to interdisciplinary research in the field of methodology, modeling toolkit and information technologies development for system risk assessment of the new stage of Arctic region exploration. The project results are directed to management information and analytical support complex problem-solving of risk-sustainable socio-economic development of the Arctic region of Russian Federation. Представлены результаты первого года реализации проекта, ориентированного на фундаментальные междисциплинарные исследования в области развития методологии и разработки модельного инструментария и информационных технологий системной оценки рисков нового этапа освоения Арктики (работа поддержана грантом Российского фонда фундаментальных исследований, проект № 15-29-06973, используемых при решении комплекса задач информационно-аналитической поддержки управления риск-устойчивым социально-экономическим развитием Арктической зоны России

  11. The Language Technologies for Lifelong Learning Project

    NARCIS (Netherlands)

    Berlanga, Adriana

    2009-01-01

    Berlanga, A. J. (2009). The Language Technologies for Lifelong Learning Project. Poster presented at the 9th IEEE International Conference on Advanced Learning Technologies (ICALT 2009). July, 15-17, 2009, Riga, Latvia.

  12. Advanced Situation Awareness Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Situation Awareness Technologies (ASAT) will facilitate exploration of the moon surface, and other planetary bodies. This powerful technology will also find...

  13. Management of Innovative Projects through Agile Technology

    Directory of Open Access Journals (Sweden)

    Radu Bucea-Manea-Tonis

    2014-09-01

    Full Text Available Because of the globalization and the evolution of internet and technologies, nowadays the innovation is associated with open collaboration conducted by a legal framework. The paper analyses the methods that allow a better management for innovative projects and focuses on agile projects within a technological network.

  14. Methane LIDAR Laser Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Fibertek proposes to develop laser technology intended to meet NASA's need for innovative lidar technologies for atmospheric measurements of methane. NASA and the...

  15. Advanced Situation Awareness Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Situation Awareness Technologies (ASAT) will facilitate exploration of the moon surface, and other planetary bodies. ASAT will create an Advanced Situation...

  16. Improved hyperspectral imaging technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Improved hyperspectral imaging technologies could enable lower-cost analysis for planetary science including atmospheric studies, mineralogical investigations, and...

  17. Personal projection with Ujoy technology

    Science.gov (United States)

    Moench, Holger; Mackens, Uwe; Pekarski, Pavel; Ritz, Arnd; S'heeren, Griet; Verbeek, Will

    2007-02-01

    Personal projection is a new way to use projectors for gaming, entertainment or photo projection. The requirements for this new category have been defined based on market research with focus groups. A screen brightness of 200-300lm out of compact and affordable devices is a must. In order to reach this performance a very bright light source is at least as important as for professional projectors. The new 50W Ujoy lamp system with 1mm arc enables efficient projection systems. Lower cooling requirements, the potential for battery operation and the low voltage input makes it the ideal source for this new category of projectors.

  18. NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 54: The technical communications practices of engineering technology students: Results of the NASA/DOD Aerospace Knowledge Diffusion Research Project phase 3 student surveys

    Science.gov (United States)

    Pinelli, Thomas E.; England, Mark; Barclay, Rebecca O.; Kennedy, John M.

    1995-01-01

    Engineering technology programs are characterized by their focus on application and practice, and by their approximately 50/50 mix of theory and laboratory experience. Engineering technology graduates are employed across the technological spectrum and are often found in areas that deal with application, implementation, and production. Yet we know very little about the communications practices and information-use skills of engineering technology students. In this paper, we report selected results of an exploratory study of engineering technology students enrolled in three U.S. institutions of higher education. Data are presented for the following topics: career goals and aspirations; the importance of, receipt of, and helpfulness of communications and information-use skills instruction; collaborative writing; use of libraries; and the use of electronic (computer) networks.

  19. Green technological change. Renewable energies, policy mix and innovation. Results of the GRETCHEN project on the impact of policy mixes on the technological and structural change in renewable energy electricity production technologies in Germany; Gruener Wandel. Erneuerbare Energien, Policy Mix und Innovation. Ergebnisse des GRETCHEN-Projektes zum Einfluss des Policy Mixes auf technologischen und strukturellen Wandel bei erneuerbaren Stromerzeugungstechnologien in Deutschland

    Energy Technology Data Exchange (ETDEWEB)

    Rogge, Karoline S.; Breitschopf, Barbara; Mattes, Katharina [Fraunhofer-Institut fuer System- und Innovationsforschung (ISI), Karlsruhe (Germany); Cantner, Uwe; Graf, Holger; Herrmann, Johannes; Kalthaus, Martin [Jena Univ. (Germany); Lutz, Christian; Wiebe, Kirsten [Gesellschaft fuer Wirtschaftliche Strukturforschung mbH (GWS), Osnabrueck (Germany)

    2015-09-15

    The report on the GRETCHEN project that was concerned with the impact of policy mixes on the technological and structural change in renewable energy electricity production technologies in Germany covers the following issues: market and technology development of renewable energy electricity production technologies; the policy mix for renewable electricity production technologies, innovative impact of the policy mix; subordinate conclusions for politics and research.

  20. Causal Models for Safety Assurance Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Fulfillment of NASA's System-Wide Safety and Assurance Technology (SSAT) project at NASA requires leveraging vast amounts of data into actionable knowledge. Models...

  1. Computer Programming Projects in Technology Courses.

    Science.gov (United States)

    Thomas, Charles R.

    1985-01-01

    Discusses programming projects in applied technology courses, examining documentation, formal reports, and implementation. Includes recommendations based on experience with a sophomore machine elements course which provided computers for problem solving exercises. (DH)

  2. Wireless Sensor Portal Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Mobitrum Corporation has demonstrated the feasibility in the Phase I of " A Wireless Sensor Portal Technology" and proposes a Phase II effort to develop a wireless...

  3. Computer Technology in Construction Project Management

    Institute of Scientific and Technical Information of China (English)

    Zhang Zhi

    2014-01-01

    Today, the network information has become a trend al of the industries have to face. For the construction project management, we must fuly master the use of computer information technology, mining its intrinsic value, so that it can promote the construction industry to meet the requirements of the times. This paper demonstrates the main application of computer technology in construction project management in a brief analysis.

  4. 'Active Disassembly using Smart Materials' end of life technology for WEEE - results from the framework V project

    Energy Technology Data Exchange (ETDEWEB)

    Arnaiz, S. [GAIKER Centro Tecnologico, Zamudio (Spain); Bodenhoefer, K. [Sony International (Europe) GmbH, Stuttgart (Germany); Harrison, D.; Hussein, H. [Brunel Univ., Runnymede (United Kingdom); Herrmann, C. [PE Europe GmbH, Stuttgart (Germany); Irasarri, L.; Malaina, M. [Indumetal Recycling, Bilbao (Spain); Schnecke, D. [Motorola Advanced Technology Center-Europe, Taunusstein (Germany); Tanskanen, P. [Nokia Research Centre, Helsinki (Finland)

    2004-07-01

    The three and a half year 'Active Disassembly using Smart Materials' (ADSM) project was set up to investigate a new generic way of dealing with waste electrical and electronic equipment (WEEE). Currently manual disassembly allows for the highest degree of separation of the required fractions, however the costs associated with this treatment are very high. This poses a difficult problem that ADSM aims to tackle. Self-disassembling products are not currently available but development of these could ease WEEE recycling. Active Disassembly may be defined as a process by which a product that is at its 'End of Life' (EoL) condition can self dismantle with the aid of embedded devices, integral or discrete. These devices may be triggered by external or internal stimuli. Active Disassembly using Smart Materials (ADSM) is the implementation of temperature-triggered mechanisms as the fixing systems. At EoL the product is raised to an increased ambient temperature exceeding in use conditions. The smart materials react to this stimulus resulting in the release of the fastening elements and thus self-disassembly. Unlike other forms of recycling ADSM is a generic EoL process. (orig.)

  5. Cost analysis methodology: Photovoltaic Manufacturing Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Whisnant, R.A. (Research Triangle Inst., Research Triangle Park, NC (United States))

    1992-09-01

    This report describes work done under Phase 1 of the Photovoltaic Manufacturing Technology (PVMaT) Project. PVMaT is a five-year project to support the translation of research and development in PV technology into the marketplace. PVMaT, conceived as a DOE/industry partnership, seeks to advanced PV manufacturing technologies, reduce PV module production costs, increase module performance, and expand US commercial production capacities. Under PVMaT, manufacturers will propose specific manufacturing process improvements that may contribute to the goals of the project, which is to lessen the cost, thus hastening entry into the larger scale, grid-connected applications. Phase 1 of the PVMaT project is to identify obstacles and problems associated with manufacturing processes. This report describes the cost analysis methodology required under Phase 1 that will allow subcontractors to be ranked and evaluated during Phase 2.

  6. Small Hydropower Research and Development Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Blackmore, Mo [Near Space Systems, Inc.

    2013-12-06

    The objective of this work was to investigate, develop, and validate the next generation of small hydroturbine generator designs that maximize the energy transfer from flowing water to electrical power generation. What resulted from this effort was the design of a new technology hydroturbine that Near Space Systems (NSS) has named the Star*Stream© Hydroturbine. Using a design that eliminates nearly all of the shortfalls of conventional hydroturbines, the Star*Stream© Hydroturbine employs a new mechanical-to-electrical energy transfer hydro design that operates without lubrication of any kind, and does not introduce foreign chemicals or particulate matter from oil or drive shaft seal degradation into the hydro ecology. In its unique configuration, the Star*Stream© Hydroturbine is nearly environmentally inert, without the negative aspects caused by interrupting the ecological continuity, i.e., disruptions to sedimentation, water quality, habitat changes, human displacement, fish migration, etc., - while it ensures dramatically reduced timeframes to project completion. While a remarkable reduction in LCOE resulting from application of the Star*Stream© Hydroturbine technology has been the core achievement of the this effort, there have been numerous technological breakthroughs from the development effort.

  7. Ceramic technology for advanced heat engines project

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    The Ceramic Technology for Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems in Conservation and Renewable Energy. This project was developed to meet the ceramic technology requirements of the OTT's automotive technology programs. This project is managed by ORNL and is closely coordinated with complementary ceramics tasks funded by other DOE offices, NASA, DoD, and industry. Research is discussed under the following topics; Turbomilling of SiC Whiskers; microwave sintering of silicon nitride; and milling characterization; processing of monolithics; silicon nitride matrix; oxide matrix; silicate matrix; thermal and wear coatings; joining; design; contact interfaces; time-dependent behavior; environmental effects; fracture mechanics; nondestructive evaluation; and technology transfer. References, figures, and tables are included with each topic.

  8. Fiscal 1996 global environmental industry technology research related project. Report on the results of the consignment project of research and development of technology for reducing carbon dioxide emissions; 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu kanren jigyo. Nisanka tanso nado haishutsu teigen gijutsu kenkyu kaihatsu itaku gyomu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of reducing emissions of carbon dioxide, freon, etc., a research project was carried out of `Research and development of technology for reducing carbon dioxide emissions` which consists of 8 projects. The paper reported the results of the projects. The projects are: (1) Development of waste water treatment of submerged combustion system, (2) Development of thermoelectric generating devices, (3) Development of high performance heat insulation materials, (4) Development of methanol reformer for transportable fuel cell, (5) Development of large pressure reducing valves, (6) Development of large-scale turbo heat pump for district heating and cooling plants, (7) Development of heat pumps for transportation equipment, and (8) Development of thermoelectric cooling devices. In (1), the waste water treatment test was conducted and reached the target. In (2), the thermoelectric device using powder sintering element obtained performance twice the performance level of the existing device. In (3), (4), (5) and (6), the target was all reached. In (7), the results well agreed in a comparison between structural analysis and experiment. The cooling unit by the SPS sintering method using Bi-Te system sintered material element obtained the cooling efficiency almost the same as that by the freon compressor method. 8 refs., 161 figs., 63 tabs.

  9. Toward high-speed access technologies: results from MUSE

    Science.gov (United States)

    Wellen, Jeroen; Smets, Rob; Hellenthal, Wim; Lepley, Jason; Tsalamanis, Ioannis; Walker, Stuart; Ng'oma, Anthony; Rijckenberg, Gert-Jan; Koonen, Ton; Habel, Kai; Langer, Klaus-Dieter

    2006-10-01

    The European MUSE project, which aims to enable "MUlti Service and access Everywhere", studies architectures, technologies and business scenarios facilitating the deployment of new Broadband Access Networks and Services. This paper gives an overview and particularly discusses results of some of the high-speed access technologies that are developed.

  10. Technology Management on Large Construction Projects

    DEFF Research Database (Denmark)

    Bonke, Sten

    The aim of this text is to discuss and to develop the concept of technology management in relation to the empirical field of construction projects. In the first of the two main sections central theories and their derived assertions concerning technology management criteria are summed up...... in a schematic theoretical framework. Hereafter the general characteristics of construction are examined from the point of view of serving as an empirical field for technology management analysis. In the second section the technology management theme is associated with the empirical properties of the Great Belt...... Fixed Link construction project. Finally on this basis the concluding remarks are pointing to the main theoretical problems and their practical implementations for the introduction of a technology management discipline in construction....

  11. Technology integration project: Environmental Restoration Technologies Department Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Williams, C.V.; Burford, T.D. [Sandia National Labs., Albuquerque, NM (United States). Environmental Restoration Technologies; Allen, C.A. [Tech Reps, Inc., Albuquerque, NM (United States)

    1996-08-01

    Sandia National Laboratories Environmental Restoration Technologies Department is developing environmental restoration technologies through funding form the US Department of Energy`s (DOE`s) Office of Science and Technology. Initially, this technology development has been through the Mixed Waste Landfill Integrated Demonstration (MWLID). It is currently being developed through the Contaminant Plume containment and Remediation Focus Area, the Landfill Stabilization Focus Area, and the Characterization, Monitoring, and Sensor Cross-Cutting Program. This Technology Integration Project (TIP) was responsible for transferring MWLID-developed technologies for routine use by environmental restoration groups throughout the DOE complex and commercializing these technologies to the private sector. The MWLID`s technology transfer/commercialization successes were achieved by involving private industry in development, demonstration, and technology transfer/commercialization activities; gathering and disseminating information about MWLID activities and technologies; and promoting stakeholder and regulatory involvement. From FY91 through FY95, 30 Technical Task Plans (TTPs) were funded. From these TTPs, the MWLID can claim 15 technology transfer/commercialization successes. Another seven technology transfer/commercialization successes are expected. With the changeover to the focus areas, the TIP continued the technology transfer/commercialization efforts begun under the MWLID.

  12. Teaching Physics Using Appropriate Technology Projects

    Science.gov (United States)

    Pearce, Joshua M.

    2007-03-01

    Appropriate technologies able to be easily and economically constructed from readily available materials by local craftspeople have a central role in the alleviation of poverty in the developing world. However, research and development of these technologies are generally apportioned relatively modest support by the developed world's institutions, in part because the operation of many of these appropriate technologies is dependent on relatively well-understood science accessible even to introductory college physics students. This paper describes a project-based assignment used to capitalize on this opportunity to motivate students to learn physics by offering them a chance to make concrete contributions to the optimization of appropriate technologies for sustainable development.

  13. FY'99 final report for the expedited technology demonstration project: demonstration test results for the MSO/off-gas and salt recycle system

    Energy Technology Data Exchange (ETDEWEB)

    Adamson, M G; Hsu, P C

    1999-05-01

    Molten Salt Oxidation (MSO) is a promising alternative to incineration for the treatment of a variety of organic wastes. Lawrence Livermore National Laboratory (LLNL) has prepared a facility in which an integrated pilot-scale MSO treatment system is being tested and demonstrated. The system consists of a MSO vessel with a dedicated off-gas treatment system, a salt recycle system, feed preparation equipment, and a ceramic final waste forms immobilization system. This integrated system was designed and engineered based on operational experience with an engineering-scale reactor unit and extensive laboratory development on salt recycle and final forms preparation. The MSO/off-gas system has been operational since December 1997. The salt recycle system and the ceramic final forms immobilization became operational in May 1998. In FY98, we have tested the MSO facility with various organic feeds, including chlorinated solvents, tributyl phosphate/kerosene, PCB-contaminated waste oils and solvents, booties, plastic pellets, ion exchange resins, activated carbon, radioactive-spiked organics, and well-characterized low-level liquid mixed wastes. MSO is shown to be a versatile technology for hazardous waste treatment and may be a solution to many waste disposal problems in DOE sites. The results of the demonstration conducted in FY98 has been reported [1]. In FY99 (October 1998 to April 1999) we conducted further testing in the MSO/off-gas system with ion exchange resins, two real waste specimens, activated carbon, and TNT-loaded activated carbon, both at regular feed rates and higher feed rates up to a superficial gas velocity of 1.75 ft/s. We also drained the salt three times (SR7, SR8, SR9) in FY99 and sent the spent salts to the salt recycle system for further processing. This report presents the results obtained from the demonstration of the MSO/off-gas system and the salt recycle system from October 1998 to April 1999. We then shut down the operation and cleaned the

  14. The EEE experiment project: status and first physics results

    Science.gov (United States)

    Abbrescia, M.; Agocs, A.; Aiola, S.; Antolini, R.; Avanzini, C.; Baldini Ferroli, R.; Bencivenni, G.; Bossini, E.; Bressan, E.; Chiavassa, A.; Cicaló, C.; Cifarelli, L.; Coccia, E.; De Gruttola, D.; De Pasquale, S.; Di Giovanni, A.; D'Incecco, M.; Dreucci, M.; Fabbri, F. L.; Frolov, V.; Garbini, M.; Gemme, G.; Gnesi, I.; Gustavino, C.; Hatzifotiadou, D.; La Rocca, P.; Li, S.; Librizzi, F.; Maggiora, A.; Massai, M.; Miozzi, S.; Panareo, M.; Paoletti, R.; Perasso, L.; Pilo, F.; Piragino, G.; Regano, A.; Riggi, F.; Righini, G. C.; Romano, F.; Sartorelli, G.; Scapparone, E.; Scribano, A.; Selvi, M.; Serci, S.; Siddi, E.; Spandre, G.; Squarcia, S.; Taiuti, M.; Toselli, F.; Votano, L.; Williams, M. C. S.; Yánez, G.; Zichichi, A.; Zuyeuski, R.

    2013-06-01

    The Extreme Energy Events Project is an experiment for the detection of Extensive Air Showers which exploits the Multigap Resistive Plate Chamber technology. At the moment 40 EEE muon telescopes, distributed all over the Italian territory, are taking data, allowing the relative analysis to produce the first interesting results, which are reported here. Moreover, this Project has a strong added value thanks to its effectiveness in terms of scientific communication, which derives from the peculiar way it was planned and carried on.

  15. Underwater communication. FOA-STU project 4: Maritime technology

    Science.gov (United States)

    Goetherstroem, L.; Kleman, B.; Lindquist, R.; Pentelius, T.

    1980-04-01

    Technological forecasts for underwater communication by acoustical, optical, or radio techniques are summarized. Results on transmission by the various means were evaluated under different hypotheses for the aqueous milieu. Technological possibilities, the need for underwater communications in assorted applications, and a practical assessment of the potential for realization are considered. Conclusions lead to a proposal for a series of development projects.

  16. Information Technology in Engineering and Project Management

    Directory of Open Access Journals (Sweden)

    Chien-Ho Ko

    2017-01-01

    Full Text Available Information Technology (IT can be regarded as the use of computers to store, analyze, and manipulate data (Daintith, 2009. With the rapid development of personal computers, IT has been widely applied in nearly every field (Davenport, 2013. This issue presents five papers covering engineering and project management, three of which focus on the application of IT to solve engineering and project management issues, while one presents research into public private partnerships, and another into cash flow forecasting.

  17. Project Management for Engineering, Business, and Technology

    CERN Document Server

    Nicholas, John M

    2012-01-01

    There is an ever-growing need for better project management within the disciplines of engineering, business and technology and this new edition is a direct response to that need. By emphasizing practical applications, this book targets the ultimate purpose of project management; to unify and integrate the interests, resources and work efforts of many stakeholders to accomplish the overall project goal. The book encompasses the essential background material, from philosophy to methodology, that is required, before dedicating itself to presenting concepts and techniques of practical application

  18. Ceramic Technology for Advanced Heat Engines Project

    Energy Technology Data Exchange (ETDEWEB)

    1990-08-01

    The Ceramic Technology For Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Advanced Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DOD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. An assessment of needs was completed, and a five year project plan was developed with extensive input from private industry. The objective of the project is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic hearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines.

  19. JUPITER PROJECT - MERGING INVERSE PROBLEM FORMULATION TECHNOLOGIES

    Science.gov (United States)

    The JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) project seeks to enhance and build on the technology and momentum behind two of the most popular sensitivity analysis, data assessment, calibration, and uncertainty analysis programs used in envi...

  20. Ceramic technology for Advanced Heat Engines Project

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1991-07-01

    Significant accomplishments in fabricating ceramic components for advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and database and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. An assessment of needs was completed, and a five year project plan was developed with extensive input from private industry. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. This project is managed by ORNL for the Office of Transportation Technologies, Office of Transportation Materials, and is closely coordinated with complementary ceramics tasks funded by other DOE offices, NASA, DOD, and industry.

  1. Geospatial Technologies: Real Projects in Real Classrooms

    Science.gov (United States)

    Kolvoord, Bob

    2008-01-01

    Geospatial technologies of geographic information systems, global positioning systems, and remote sensing are just a few of the projects that evoke an unexpected drive and devotion from high school students in Virginia. Their integration into different curricular areas lets students focus on understanding their community and the many issues that…

  2. NASA's Cryogenic Fluid Management Technology Project

    Science.gov (United States)

    Tramel, Terri L.; Motil, Susan M.

    2008-01-01

    The Cryogenic Fluid Management (CFM) Project's primary objective is to develop storage, transfer, and handling technologies for cryogens that will support the enabling of high performance cryogenic propulsion systems, lunar surface systems and economical ground operations. Such technologies can significantly reduce propellant launch mass and required on-orbit margins, reduce or even eliminate propellant tank fluid boil-off losses for long term missions, and simplify vehicle operations. This paper will present the status of the specific technologies that the CFM Project is developing. The two main areas of concentration are analysis models development and CFM hardware development. The project develops analysis tools and models based on thermodynamics, hydrodynamics, and existing flight/test data. These tools assist in the development of pressure/thermal control devices (such as the Thermodynamic Vent System (TVS), and Multi-layer insulation); with the ultimate goal being to develop a mature set of tools and models that can characterize the performance of the pressure/thermal control devices incorporated in the design of an entire CFM system with minimal cryogen loss. The project does hardware development and testing to verify our understanding of the physical principles involved, and to validate the performance of CFM components, subsystems and systems. This database provides information to anchor our analytical models. This paper describes some of the current activities of the NASA's Cryogenic Fluid Management Project.

  3. The New Mexico Technology Deployment Pilot Project: A technology reinvestment project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    The New Mexico Technology Deployment Project (NMTDP) has been in operation for slightly more than two years. As one of the original TRP projects, NMTDP had the charter to develop and validate a new model for technology extraction which emphasized focused technology collaboration, early industry involvement, and a strong dual use commercialization and productization emphasis. Taken in total, the first two years of the NMTDP have been exceptionally successful, surpassing the goals of the project. This report describes the accomplishments and evolution of the NMTDP to date and discusses the future potential of the project. Despite the end of federal funding, and a subsequent reduction in level of effort, the project partners are committed to continuation of the project.

  4. Biologically inspired technologies in NASA's morphing project

    Science.gov (United States)

    McGowan, Anna-Maria R.; Cox, David E.; Lazos, Barry S.; Waszak, Martin R.; Raney, David L.; Siochi, Emilie J.; Pao, S. Paul

    2003-07-01

    For centuries, biology has provided fertile ground for hypothesis, discovery, and inspiration. Time-tested methods used in nature are being used as a basis for several research studies conducted at the NASA Langley Research Center as a part of Morphing Project, which develops and assesses breakthrough vehicle technologies. These studies range from low drag airfoil design guided by marine and avian morphologies to soaring techniques inspired by birds and the study of small flexible wing vehicles. Biology often suggests unconventional yet effective approaches such as non-planar wings, dynamic soaring, exploiting aeroelastic effects, collaborative control, flapping, and fibrous active materials. These approaches and other novel technologies for future flight vehicles are being studied in NASA's Morphing Project. This paper will discuss recent findings in the aeronautics-based, biologically-inspired research in the project.

  5. Recent work and results on sparrow project

    Energy Technology Data Exchange (ETDEWEB)

    Harvey, Neal R [Los Alamos National Laboratory

    2010-12-23

    This briefing describes recent work undertaken on the Sparrow Project and results of this work. It describes experiments comparing the use of Genie with 2 classes with 3 classes for the problem of ship delineation. It also describes some preliminary work in the area of the optimization of segmentation techniques.

  6. Results of industry conservation project data review

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-23

    Results are summarized of the combined efforts of the Division of Industrial Energy Conservation (INDUS) and independent reviewers to perform an evaluation of the existing and proposed INDUS energy conservation research, demonstration, and development projects. The purpose of the review was to obtain evaluations of the capital cost, energy savings, and operating costs for each project which would be used to upgrade the original proposal data currently in the threshold system. Section II contains the detailed summaries of the threshold evaluation data prepared by the members. Section III contains the risk analysis data submitted by the reviewers. (MCW)

  7. Critical success factors in information technology projects

    Directory of Open Access Journals (Sweden)

    Ayesha

    2017-02-01

    Full Text Available The purpose of this study is to determine the critical success factors (CSF of IT projects in Pa-kistan. The identified factors cannot only be functional to exact type IT projects but also to all types of IT projects, their success directly affects the achievement of whole organization. The proposed study of this paper has determined 15 factors influencing the most on the success of IT projects through multiple regression analysis. The survey has disclosed that many CSFs were found related to IT projects but these 15 factors are also the backbone of IT projects. The re-search results obtained clearly indicated that the Leadership Qualities played a significant role in obtaining Top Management support in order to access to resources however, the Leadership Qualities did not play any role on the trained and capable Project Team Members. Besides, it is undoubtedly defined effective communication of the project was established to be influential on the conclusion and contributing factor towards the Success of IT projects in Pakistan. Top Man-agement Support as a whole was not found to play a key role in the IT Project Success.

  8. Supporting Project Work with Information Technology

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2015-01-01

    Like so many other institutions, Roskilde University has had to adapt to the new realities brought about by the rapid developments in information and communication technology (ICT). On the whole, ICT tools have proven to be helpful in supporting and developing the work forms on which Roskilde...... University problem-oriented project work is based. However, in implementing and integrating the new technologies in academic practices, a number of challenges have had to be addressed. This chapter discusses four of these challenges. The first is to provide a physical and virtual framework for learning...

  9. SUCCESS CONCEPT ANALYSIS APPLIED TO THE INFORMATION TECHNOLOGY PROJECT MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Cassio C. Montenegro Duarte

    2012-05-01

    Full Text Available This study evaluates the concept of success in project management that is applicable to the IT universe, from the classical theory associated with the techniques of project management. Therefore, it applies the theoretical analysis associated to the context of information technology in enterprises as well as the classic literature of traditional project management, focusing on its application in business information technology. From the literature developed in the first part of the study, four propositions were prepared for study which formed the basis for the development of the field research with three large companies that develop projects of Information Technology. The methodology used in the study predicted the development of the multiple case study. Empirical evidence suggests that the concept of success found in the classical literature in project management adjusts to the environment management of IT projects. Showed that it is possible to create the model of standard IT projects in order to replicate it in future derivatives projects, which depends on the learning acquired at the end of a long and continuous process and sponsorship of senior management, which ultimately results in its merger into the company culture.

  10. National Security Technology Incubation Project Continuation Plan

    Energy Technology Data Exchange (ETDEWEB)

    None

    2008-09-30

    This document contains a project continuation plan for the National Security Technology Incubator (NSTI). The plan was developed as part of the National Security Preparedness Project (NSPP) funded by a Department of Energy (DOE)/National Nuclear Security Administration (NNSA) grant. This continuation plan describes the current status of NSTI (staffing and clients), long-term goals, strategies, and long-term financial solvency goals.The Arrowhead Center of New Mexico State University (NMSU) is the operator and manager of the NSTI. To realize the NSTI, Arrowhead Center must meet several performance objectives related to planning, development, execution, evaluation, and sustainability. This continuation plan is critical to the success of NSTI in its mission of incubating businesses with security technology products and services.

  11. Supporting Project Work with Information Technology

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2015-01-01

    Like so many other institutions, Roskilde University has had to adapt to the new realities brought about by the rapid developments in information and communication technology (ICT). On the whole, ICT tools have proven to be helpful in supporting and developing the work forms on which Roskilde...... University problem-oriented project work is based. However, in implementing and integrating the new technologies in academic practices, a number of challenges have had to be addressed. This chapter discusses four of these challenges. The first is to provide a physical and virtual framework for learning...... activities. The second is to direct student use of ICT in terms of making systems available and teaching academic computing. The third challenge is to supervise and conduct project work online and in blended learning environments. Finally, one must find a way to exploit the potentials of ICT in problem...

  12. Advanced Turbine Technology Applications Project (ATTAP)

    Science.gov (United States)

    1993-01-01

    This report is the fifth in a series of Annual Technical Summary Reports for the Advanced Turbine Technology Applications Project (ATTAP), sponsored by the U.S. Department of Energy (DOE). The report was prepared by Garrett Auxiliary Power Division (GAPD), a unit of Allied-Signal Aerospace Company, a unit of Allied Signal, Inc. The report includes information provided by Garrett Ceramic Components, and the Norton Advanced Ceramics Company, (formerly Norton/TRW Ceramics), subcontractors to GAPD on the ATTAP. This report covers plans and progress on ceramics development for commercial automotive applications over the period 1 Jan. through 31 Dec. 1992. Project effort conducted under this contract is part of the DOE Gas Turbine Highway Vehicle System program. This program is directed to provide the U.S. automotive industry the high-risk, long-range technology necessary to produce gas turbine engines for automobiles with reduced fuel consumption, reduced environmental impact, and a decreased reliance on scarce materials and resources. The program is oriented toward developing the high-risk technology of ceramic structural component design and fabrication, such that industry can carry this technology forward to production in the 1990's. The ATTAP test bed engine, carried over from the previous AGT101 project, is being used for verification testing of the durability of next generation ceramic components, and their suitability for service at Reference Powertrain Design conditions. This document reports the technical effort conducted by GAPD and the ATTAP subcontractors during the fifth year of the project. Topics covered include ceramic processing definition and refinement, design improvements to the ATTAP test bed engine and test rigs, and the methodology development of ceramic impact and fracture mechanisms. Appendices include reports by ATTAP subcontractors in the development of silicon nitride materials and processes.

  13. New results from the RD52 project

    Science.gov (United States)

    Wigmans, Richard

    2016-07-01

    Simultaneous detection of the Čerenkov light and scintillation light produced in hadron showers makes it possible to measure the electromagnetic shower fraction event by event and thus eliminate the detrimental effects of fluctuations in this fraction on the performance of calorimeters. In the RD52 (DREAM) project, the possibilities of this dual-readout calorimetry are investigated and optimized. In this talk, the latest results of this project will be presented. These results concern tests of a dual-readout fiber calorimeter with electrons at very small angles of incidence, detailed measurements of the time structure of hadron showers in this detector, as well as elaborate comparisons of various aspects of the calorimeter performance with GEANT4 simulations.

  14. New results from the RD52 project

    Energy Technology Data Exchange (ETDEWEB)

    Wigmans, Richard, E-mail: wigmans@ttu.edu

    2016-07-11

    Simultaneous detection of the Čerenkov light and scintillation light produced in hadron showers makes it possible to measure the electromagnetic shower fraction event by event and thus eliminate the detrimental effects of fluctuations in this fraction on the performance of calorimeters. In the RD52 (DREAM) project, the possibilities of this dual-readout calorimetry are investigated and optimized. In this talk, the latest results of this project will be presented. These results concern tests of a dual-readout fiber calorimeter with electrons at very small angles of incidence, detailed measurements of the time structure of hadron showers in this detector, as well as elaborate comparisons of various aspects of the calorimeter performance with GEANT4 simulations.

  15. Advanced Gas Turbine (AGT) technology development project

    Science.gov (United States)

    1987-01-01

    This report is the final in a series of Technical Summary Reports for the Advanced Gas Turbine (AGT) Technology Development Project, authorizrd under NASA Contract DEN3-167 and sponsored by the DOE. The project was administered by NASA-Lewis Research Center of Cleveland, Ohio. Plans and progress are summarized for the period October 1979 through June 1987. This program aims to provide the US automotive industry the high risk, long range technology necessary to produce gas turbine engines for automobiles that will reduce fuel consumption and reduce environmental impact. The intent is that this technology will reach the marketplace by the 1990s. The Garrett/Ford automotive AGT was designated AGT101. The AGT101 is a 74.5 kW (100 shp) engine, capable of speeds to 100,000 rpm, and operates at turbine inlet temperatures to 1370 C (2500 F) with a specific fuel consumption level of 0.18 kg/kW-hr (0.3 lbs/hp-hr) over most of the operating range. This final report summarizes the powertrain design, power section development and component/ceramic technology development.

  16. Workplace Factors That Shape Information Technology Project Success

    Science.gov (United States)

    Nguyen, Dan Schilling

    2013-01-01

    Information technology (IT) project success depends on having a project manager with effective decision making, leadership, and project management skills. Project success also depends on completing the project in a given budget, time, and scope. Despite these critical qualities of a successful project manager, little research has explored the…

  17. Advanced Turbine Technology Applications Project (ATTAP) and Hybrid Vehicle Turbine Engine Technology Support project (HVTE-TS): Final summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    This final technical report was prepared by Rolls-Royce Allison summarizing the multiyear activities of the Advanced Turbine Technology Applications Project (ATTAP) and the Hybrid Vehicle Turbine Engine Technology Support (HVTE-TS) project. The ATTAP program was initiated in October 1987 and continued through 1993 under sponsorship of the US Department of Energy (DOE), Energy Conservation and Renewable Energy, Office of Transportation Technologies, Propulsion Systems, Advanced Propulsion Division. ATTAP was intended to advance the technological readiness of the automotive ceramic gas turbine engine. The target application was the prime power unit coupled to conventional transmissions and powertrains. During the early 1990s, hybrid electric powered automotive propulsion systems became the focus of development and demonstration efforts by the US auto industry and the Department of energy. Thus in 1994, the original ATTAP technology focus was redirected to meet the needs of advanced gas turbine electric generator sets. As a result, the program was restructured to provide the required hybrid vehicle turbine engine technology support and the project renamed HVTE-TS. The overall objective of the combined ATTAP and HVTE-TS projects was to develop and demonstrate structural ceramic components that have the potential for competitive automotive engine life cycle cost and for operating 3,500 hr in an advanced high temperature turbine engine environment. This report describes materials characterization and ceramic component development, ceramic components, hot gasifier rig testing, test-bed engine testing, combustion development, insulation development, and regenerator system development. 130 figs., 12 tabs.

  18. SANA - project results and PIK contributions

    Energy Technology Data Exchange (ETDEWEB)

    Bellmann, K.; Erhard, M.; Flechsig, M.; Grote, R.; Suckow, F.

    1998-03-01

    This report includes the final project results of the two groups at PIK, involved in the project: Firstly, the newly developed physiologically-based forest growth model FORSANA was applied for the first time to three pine stands, which differed largely in their air pollution and deposition history. (The evaluation of the model is presented in PIK Report 32). The model was able to explain the growth during the last decades of at least two of the three stands from the climatic and deposition conditions at the sites. The third site was shown to be exceptional with respect to its relation between dimension and age, and was supposed to be exposed to major disturbances in the past, which could not be accounted for by the model. To extrapolate from the stand level to the regional level, FORSANA was initialised with spatially explicit data from forestry inventory and soil maps. Simulations were executed with measured weather records and regional distributions of deposition and air pollution, which were estimated on the basis of emission inventories and wind directions. Different assumptions about the development of air pollution had been applied to investigate different pollution abatement strategies. The results showed that a positive effect can be expected from the actual emission reductions close the main centres of emission, but showed also that this effect is decreasing with increasing distance from the emission source. (orig./KW)

  19. Information technology project risk management in Peru

    OpenAIRE

    Del Carpio Gallegos, Javier; Universidad Nacional Mayor de San Marcos

    2014-01-01

    This article shows how some principles, uses, and practices of risk management are applied in information technology projects in Peru; in the last four years, in representative sectors like manufacturing, banking, information and communications, academics institutions, construction, government, consulting, services, and others. El presente artículo muestra algunos principios, usos y prácticas de cómo la gestión de riesgos de proyectos de tecnología se ha llevado a cabo en los últimos cuatr...

  20. Planned and ongoing projects (pop) database: development and results.

    Science.gov (United States)

    Wild, Claudia; Erdös, Judit; Warmuth, Marisa; Hinterreiter, Gerda; Krämer, Peter; Chalon, Patrice

    2014-11-01

    The aim of this study was to present the development, structure and results of a database on planned and ongoing health technology assessment (HTA) projects (POP Database) in Europe. The POP Database (POP DB) was set up in an iterative process from a basic Excel sheet to a multifunctional electronic online database. The functionalities, such as the search terminology, the procedures to fill and update the database, the access rules to enter the database, as well as the maintenance roles, were defined in a multistep participatory feedback loop with EUnetHTA Partners. The POP Database has become an online database that hosts not only the titles and MeSH categorizations, but also some basic information on status and contact details about the listed projects of EUnetHTA Partners. Currently, it stores more than 1,200 planned, ongoing or recently published projects of forty-three EUnetHTA Partners from twenty-four countries. Because the POP Database aims to facilitate collaboration, it also provides a matching system to assist in identifying similar projects. Overall, more than 10 percent of the projects in the database are identical both in terms of pathology (indication or disease) and technology (drug, medical device, intervention). In addition, approximately 30 percent of the projects are similar, meaning that they have at least some overlap in content. Although the POP DB is successful concerning regular updates of most national HTA agencies within EUnetHTA, little is known about its actual effects on collaborations in Europe. Moreover, many non-nationally nominated HTA producing agencies neither have access to the POP DB nor can share their projects.

  1. INCA-CE project: status and results

    Science.gov (United States)

    Strauss, Franziska; Meirold-Mautner, Ingo; Bica, Benedikt; Kann, Alexander; Wang, Yong

    2013-04-01

    Every year, Central Europe (CE) is affected by weather extremes challenging civil protection authorities, hydrologists and road maintenance services to timely warnings. Within the INCA-CE project (Integrated Nowcasting through Comprehensive Analysis in Central Europe; http://www.inca-ce.eu) which is supported by the European Regional Development Fund a deepened transnational cooperation between meteorological/hydrological services and three application areas is established. This guarantees for both enhancements of meteorological products in the sense of end-user friendliness, and standardized information exchange across borders. At present, INCA-CE is the only project throughout the world which connects cooperation to such an extent with respect to its transnational and multidisciplinary framework (in the meanwhile it has been chosen as World Weather Research Programme/Forecast Demonstration Project by the World Meteorological Organization). Key partners from eight countries (from national meteorological/hydrological services and the three different application areas) accept the challenge to work on standardization and harmonization tools. Therefore, the INCA nowcasting system - developed at the Austrian weather service (ZAMG) in the 1990ies - has been implemented at all CE meteorological/hydrological services and is advanced and refined to the specific user needs to (i) provide high quality nowcasting products which are standardized and harmonized across borders, (ii) improve information chains from models to warnings and protection measures in case of disaster, and (iii) make the public and stakeholders more familiar with meteorological products. However, the potential to achieve these listed improvements is only possible through the intense transnational and multidisciplinary cooperation, because for one institution and one country alone it would be impossible to cope with all the necessary tasks. In this presentation the status and results of the INCA

  2. Venture Leaders Prize for innovative technology projects

    CERN Multimedia

    2006-01-01

    In co-operation with the GEBERT RÜF FOUNDATION and the Ernest & Young Entrepreneur of the Year Award, venturelab will be presenting the Venture Leaders Prize. The Venture Leaders Prize, which is the new guise of the NETS (New Entrepreneurs in Technology and Science) Prize, will give twenty research entrepreneurs with projects to develop innovative technologies the opportunity to win the chance of participating in a programme to assist them in starting up their companies. The winners will go to spend 10 days in the Boston area (United States) where they will take part in a development programme for their project, which will include an entrepreneurship course, opportunities to meet start-up companies and financing experts, etc. This prize has already spawned many companies such as id Quantique, Selexis or ABMI which have contributed to the economic development of regions, particularly in French-speaking Switzerland. The competition is open to students and scientists from all fields, who would like to s...

  3. The Columbia River Protection Supplemental Technologies Quality Assurance Project Plan

    Energy Technology Data Exchange (ETDEWEB)

    Fix, N. J.

    2008-03-12

    Pacific Northwest National Laboratory researchers are working on the Columbia River Protection Supplemental Technologies Project. This project is a U. S. Department of Energy, Office of Environmental Management-funded initiative designed to develop new methods, strategies, and technologies for characterizing, modeling, remediating, and monitoring soils and groundwater contaminated with metals, radionuclides, and chlorinated organics. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by the Technologies Project staff.

  4. King County Metro Battery Electric Bus Demonstration: Preliminary Project Results

    Energy Technology Data Exchange (ETDEWEB)

    2017-05-22

    The U.S. Federal Transit Administration (FTA) funds a variety of research projects that support the commercialization of zero-emission bus technology. To evaluate projects funded through these programs, FTA has enlisted the help of the National Renewable Energy Laboratory (NREL) to conduct third-party evaluations of the technologies deployed under the FTA programs. NREL works with the selected agencies to evaluate the performance of the zero-emission buses compared to baseline conventional buses in similar service. The evaluation effort will advance the knowledge base of zero-emission technologies in transit bus applications and provide 'lessons learned' to aid other fleets in incrementally introducing next generation zero-emission buses into their operations. This report provides preliminary performance evaluation results from a demonstration of three zero-emission battery electric buses at King County Metro in King County, Washington. NREL developed this preliminary results report to quickly disseminate evaluation results to stakeholders. Detailed evaluation results will be published in future reports.

  5. Biomedical Monitoring By A Novel Noncontact Radio Frequency Technology Project

    Science.gov (United States)

    Oliva-Buisson, Yvette J. (Compiler)

    2014-01-01

    The area of Space Health and Medicine is one of the NASA's Space Technology Grand Challenges. Space is an extreme environment which is not conducive to human life. The extraterrestrial environment can result in the deconditioning of various human physiological systems and thus require easy to use physiological monitoring technologies in order to better monitor space crews for appropriate health management and successful space missions and space operations. Furthermore, the Space Technology Roadmap's Technology Area Breakdown Structure calls for improvements in research to support human health and performance (Technology Area 06). To address these needs, this project investigated a potential noncontact and noninvasive radio frequency-based technique of monitoring central hemodynamic function in human research subjects in response to orthostatic stress.

  6. Ceramic Technology Project database: March 1990 summary report. DOE/ORNL Ceramic Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1992-07-01

    This report is the fifth in a series of semiannual data summary reports on information being stored in the Ceramic Technology Project (CTP) database. The overall system status as of March 31, 1990, is summarized, and the latest additions of ceramic mechanical properties data are given for zirconia, silicon carbide, and silicon nitride ceramic mechanical properties data, including some properties on brazed specimens.

  7. Major results of the MAARBLE project

    Science.gov (United States)

    Daglis, Ioannis A.; Bourdarie, Sebastien; Horne, Richard B.; Khotyaintsev, Yuri; Mann, Ian R.; Santolik, Ondrej; Turner, Drew L.; Balasis, Georgios

    2016-04-01

    The goal of the MAARBLE (Monitoring, Analyzing and Assessing Radiation Belt Loss and Energization) project was to shed light on the ways the dynamic evolution of the Van Allen belts is influenced by low-frequency electromagnetic waves. MAARBLE was implemented by a consortium of seven institutions (five European, one Canadian and one US) with support from the European Community's Seventh Framework Programme. The MAARBLE project employed multi-spacecraft monitoring of the geospace environment, complemented by ground-based monitoring, in order to analyze and assess the physical mechanisms leading to radiation belt particle energisation and loss. Particular attention was paid to the role of ULF/VLF waves. Within MAARBLE we created a database containing properties of ULF and VLF waves, based on measurements from the Cluster, THEMIS and CHAMP missions and from the CARISMA and IMAGE ground magnetometer networks. The database is now available to the scientific community through the Cluster Science Archive as auxiliary content. Based on the wave database, a statistical model of the wave activity dependent on the level of geomagnetic activity, solar wind forcing, and magnetospheric region has been developed. Multi-spacecraft particle measurements have been incorporated into data assimilation tools, leading to a more accurate estimate of the state of the radiation belts. The synergy of wave and particle observations is in the core of MAARBLE research studies of radiation belt dynamics. Results and conclusions from these studies will be presented in this paper. The MAARBLE (Monitoring, Analyzing and Assessing Radiation Belt Energization and Loss) collaborative research project has received funding from the European Unions Seventh Framework Programme (FP7-SPACE 2011-1) under grant agreement no. 284520. The complete MAARBLE Team: Ioannis A. Daglis, Sebastien Bourdarie, Richard B. Horne, Yuri Khotyaintsev, Ian R. Mann, Ondrej Santolik, Drew L. Turner, Georgios Balasis, Anastasios

  8. Results of the 1975 Delaware PLATO Project.

    Science.gov (United States)

    Hofstetter, Fred T.

    During the Spring semester of 1975, the University of Delaware initiated a PLATO project with the dual purpose of demonstrating how a computer system might function in a university and of evaluating what part such a system might play in the future of the university and its supporting community. The demonstration phase of the project, which…

  9. 30 CFR 402.11 - Technology-development project applications.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Technology-development project applications... RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Application, Evaluation, and Management Procedures § 402.11 Technology-development project applications. (a) Grant awards will be used...

  10. Fiscal 1997 international cooperation project. Report on the results of the research on environmental harmony type combustion technology; 1997 nendo kokusai kenkyu kyoryoku jigyo. Kankyo chowagata nensho gijutsu ni kansuru kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Out of the R and D on the environmental harmony type combustion technology, the results of the project carried out in fiscal 1997 were summed up. In the site survey, etc., visits were paid to France, Spain, Greek, Germany, the U.K. and the U.S. to have discussions and examine the trend of research on the NOx removal catalyst and catalyst combustion. In the actual R and D, the R and D were conducted on zeolite base NOx removal catalyst, oxide composite base NOx removal catalyst, alumina base NOx removal catalyst, direct decomposition type NOx removal catalyst, catalyst combustion, etc. In the R and D of the catalyst combustion, durability under high gas flow flux was examined of PdO-Pt/Ba-Al203 catalyst developed for low temperature use, which indicated that durability and low temperature activity were heightened. As high temperature use catalyst, high temperature durability was examined of the developed Pd0-La/Gd-ZrO2 catalyst, which showed that the durability was favorable. 322 refs., 261 figs., 55 tabs.

  11. [Evolocumab and PROFICIO Project: Initial Results].

    Science.gov (United States)

    Kraml, Pavel

    2015-11-01

    The PROFICIO project includes 20 clinical studies evaluating the effect of evolocumab on the incidence of cardio-vascular disease including its safety profile and tolerance. Most of the included studies follow the average proportional decrease of LDL-cholesterol concentrations over 10 and 12 weeks of administering evolocumab as compared to the input values. The first results were announced at the congress of the European Society of Cardiology (ESC) in London at the end of August and beginning of September 2015. This subanalysis comprised 3146 patients, who underwent one of the selected studies of phase 3 clinical testing and who were administered a dose of 140 mg s.c. evolocumab once in 2 weeks, or 420 mg s.c. once in 4 weeks. LDL-cholesterol levels decreased after evolocumab by 56.5-74.9% in the individual studies as compared to placebo and by 36.9-44.9% compared to ezetimib. The incidence of adverse effects did not differ from the group which used placebo.

  12. I-5/Gilman advanced technology bridge project

    Science.gov (United States)

    Lanza di Scalea, Francesco; Karbhari, Vistasp M.; Seible, Frieder

    2000-04-01

    The UCSD led I-5/Gilman Advanced Technology Bridge Project will design and construct a fully functional traffic bridge of advanced composite materials across Interstate 5 in La Jolla, California. Its objective is to demonstrate the use of advanced composite technologies developed by the aerospace industry in commercial applications to increase the life expectancy of new structures and for the rehabilitation of aging infrastructure components. The structure will be a 450 ft long, 60 ft wide cable-stayed bridge supported by a 150 ft A-frame pylon with two vehicular lanes, two bicycle lanes, pedestrian walkways and utility tunnels. The longitudinal girders and pylon will be carbon fiber shells filled with concrete. The transverse deck system will consist of hollow glass/carbon hybrid tubes and a polypropylene fiber reinforced concrete deck with an arch action. Selected cables will be composite. The bridge's structural behavior will be monitored to determine how advanced composite materials perform in civil infrastructure applications. The bridge will be instrumented to obtain performance and structural health data in real time and, where possible, in a remote fashion. The sensors applied to the bridge will include electrical resistance strain gages, fiberoptic Bragg gratings and accelerometers.

  13. Nuclear Systems (NS): Technology Demonstration Unit (TDU) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Nuclear Systems Project demonstrates nuclear power technology readiness to support the goals of NASA’s Space Technology Mission Directorate. To this end,...

  14. Solid State Electrolyte for Li Battery Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration —  The fabrication technology developed in this project will aid GRC in advancing  Lithium Ion Batteries (LIB) technology by developing new electrode and SSE...

  15. Minimal Technologies Application Project: Planning and installation

    Energy Technology Data Exchange (ETDEWEB)

    Zellmer, S.D.; Hinchman, R.R.; Severinghaus, W.D.; Johnson, D.O.; Brent, J.J.

    1989-03-01

    Intensive and continuous tactical training during the last 35 years at the Hohenfels Training Area in West Germany has caused the loss of vegetative ground cover and has accelerated soil erosion rates, resulting in extensive environmental damage, safety hazards, and unrealistic training habitats. The objectives of this project are to develop and evaluate revegetation procedures for establishing adequate vegetative cover to control erosion at minimal costs and disruption to training activities. This project involved the development and installation of 12 revegetation procedures that combined four seedbed preparation methods and seeding options with three site-closure periods. In March 1987, the four seedbed preparation/seeding options and closure periods were selected, a study site design and location chosen, and specifications for the revegetation procedures developed. A German rehabilitation contractor attempted the specified seedbed preparation and seeding on the 13.5-ha site in June, but abnormally high rainfall, usually wet site conditions, and lack of adequate equipment prevented the contractor from completing six of the 12 planned procedures. Planning and execution of the project has nonetheless provided valuable information on the importance and use of soil analytical results, seed availability and cost data, contractor equipment requirements, and time required for planning future revegetation efforts. Continued monitoring of vegetative ground cover at the site for the next two years, combined with cost information, will provide necessary data to determine which of the six revegetation procedures is the most effective. These data will be used in planning future rehabilitation efforts on tactical training areas.

  16. Project Oriented Immersion Learning: Method and Results

    DEFF Research Database (Denmark)

    Icaza, José I.; Heredia, Yolanda; Borch, Ole M.

    2005-01-01

    house that develops digital products including e-books, tutorials, web sites and so on. The students defined the problem that their product was to solve; choose the type of product and the content; and built the product following a strict project methodology. A wiki server was used as a platform to hold...

  17. Milliken Clean Coal Technology Demonstration Project. Project performance summary, Clean Coal Technology Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2002-11-30

    The New York State Electric & Gas Corporation (NYSEG) demonstrated a combination of technologies at its Milliken Station in Lansing, New York, designed to: (1) achieve high sulfur dioxide (SO2) capture efficiency, (2) bring nitrogen oxide (NOx) emissions into compliance with Clean Air Act Amendments of 1990 (CAAA), (3) maintain high station efficiency, and (4) eliminate waste water discharge. This project is part of the U.S. Department of Energy's (DOE) Clean Coal Technology Demonstration Program (CCTDP) established to address energy and environmental concerns related to coal use. DOE sought cost-shared partnerships with industry through five nationally competed solicitations to accelerate commercialization of the most promising advance coal-based power generation and pollution control technologies. The CCTDP, valued at over five billion dollars, has significantly leveraged federal funding by forging effective partnerships founded on sound principles. For every federal dollar invested, CCTDP participants have invested two dollars. These participants include utilities, technology developers, state governments, and research organizations. The project presented here was one of nine selected in January 1991 from 33 proposals submitted in response to the program's fourth solicitation.

  18. Milliken Clean Coal Technology Demonstration Project. Project performance summary, Clean Coal Technology Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2002-11-30

    The New York State Electric & Gas Corporation (NYSEG) demonstrated a combination of technologies at its Milliken Station in Lansing, New York, designed to: (1) achieve high sulfur dioxide (SO2) capture efficiency, (2) bring nitrogen oxide (NOx) emissions into compliance with Clean Air Act Amendments of 1990 (CAAA), (3) maintain high station efficiency, and (4) eliminate waste water discharge. This project is part of the U.S. Department of Energy's (DOE) Clean Coal Technology Demonstration Program (CCTDP) established to address energy and environmental concerns related to coal use. DOE sought cost-shared partnerships with industry through five nationally competed solicitations to accelerate commercialization of the most promising advance coal-based power generation and pollution control technologies. The CCTDP, valued at over five billion dollars, has significantly leveraged federal funding by forging effective partnerships founded on sound principles. For every federal dollar invested, CCTDP participants have invested two dollars. These participants include utilities, technology developers, state governments, and research organizations. The project presented here was one of nine selected in January 1991 from 33 proposals submitted in response to the program's fourth solicitation.

  19. Academic Training: The ITER project: technological challenges

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 31 May, 1, 2, 3, June from 11:00 to 12:00 on 31 May and 2, 3, June. From 10:00 to 12:00 on 1 June - Main Auditorium, bldg. 500 The ITER project: technological challenges J. LISTER / CRPP-EPFL, Lausanne, CH and P. BRUZZONE / CRPP-EPFL, Zürich, CH The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the...

  20. Academic Training: The ITER project: technological challenges

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 31 May, 1, 2, 3, June from 11:00 to 12:00 on 31 May and 2, 3, June. From 10:00 to 12:00 on 1 June - Main Auditorium, bldg. 500 The ITER project: technological challenges J. LISTER / CRPP-EPFL, Lausanne and P. BRUZZONE / CRPP-EPFL, Zürich The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the de...

  1. OPTIMIZING OUTCOME IN THE UNIVERSITY-INDUSTRY TECHNOLOGY TRANSFER PROJECTS

    Directory of Open Access Journals (Sweden)

    Hamed ALAVI

    2016-04-01

    Full Text Available Transferring inventions of academic scientists to private enterprises for the purpose of commercialization is long known as University-Industry (firm Technology Transfer While the importance of this phenomenon is simultaneously raising in public and private sector, only a part of patented academic inventions succeed in passing the process of commercialization. Despite the fact that formal Technology Transfer process and licencing of patented innovations to third party is the main legal tool for safeguarding rights of academic inventors in commercialization of their inventions, it is not sufficient for transmitting tacit knowledge which is necessary in exploitation of transferred technology. Existence of reciprocal and complementary relations between formal and informal technology transfer process has resulted in formation of different models for university-industry organizational collaboration or even integration where licensee firms keep contact with academic inventors after gaining legal right for commercialization of their patented invention. Current paper argues that despite necessity for patents to legally pass the right of commercialization of an invention, they are not sufficient for complete knowledge transmission in the process of technology transfer. Lack of efficiency of formal mechanism to end the Technology Transfer loop makes an opportunity to create innovative interpersonal and organizational connections among patentee and licensee company. With emphasize on need for further elaboration of informal mechanisms as critical and underappreciated aspect of technology transfer process, article will try to answer the questions of how to optimize knowledge transmission process in the framework of University-Industry Technology Transfer Projects? What is the theoretical basis for university-industry technology transfer process? What are organization collaborative models which can enhance overall performance by improving transmission of

  2. Proposed Project Selection Method for Human Support Research and Technology Development (HSR&TD)

    Science.gov (United States)

    Jones, Harry

    2005-01-01

    The purpose of HSR&TD is to deliver human support technologies to the Exploration Systems Mission Directorate (ESMD) that will be selected for future missions. This requires identifying promising candidate technologies and advancing them in technology readiness until they are acceptable. HSR&TD must select an may of technology development projects, guide them, and either terminate or continue them, so as to maximize the resulting number of usable advanced human support technologies. This paper proposes an effective project scoring methodology to support managing the HSR&TD project portfolio. Researchers strongly disagree as to what are the best technology project selection methods, or even if there are any proven ones. Technology development is risky and outstanding achievements are rare and unpredictable. There is no simple formula for success. Organizations that are satisfied with their project selection approach typically use a mix of financial, strategic, and scoring methods in an open, established, explicit, formal process. This approach helps to build consensus and develop management insight. It encourages better project proposals by clarifying the desired project attributes. We propose a project scoring technique based on a method previously used in a federal laboratory and supported by recent research. Projects are ranked by their perceived relevance, risk, and return - a new 3 R's. Relevance is the degree to which the project objective supports the HSR&TD goal of developing usable advanced human support technologies. Risk is the estimated probability that the project will achieve its specific objective. Return is the reduction in mission life cycle cost obtained if the project is successful. If the project objective technology performs a new function with no current cost, its return is the estimated cash value of performing the new function. The proposed project selection scoring method includes definitions of the criteria, a project evaluation

  3. Science and Technology Roadmapping to Support Project Planning

    Energy Technology Data Exchange (ETDEWEB)

    Mc Carthy, Jeremiah Justin; Haley, Daniel Joseph; Dixon, Brent Wayne

    2001-07-01

    Disciplined science and technology roadmapping provides a framework to coordinate research and development activities with project objectives. This case-history paper describes initial project technology needs identification, assessment and R&D ranking activities supporting characterization of 781 waste tanks requiring a 'hazardous waste determination' or 'verification of empty' decision to meet an Idaho state Voluntary Consent Order.

  4. ECUT (Energy Conversion and Utilization Technologies) program: Biocatalysis project

    Science.gov (United States)

    Baresi, Larry

    1989-03-01

    The Annual Report presents the fiscal year (FY) 1988 research activities and accomplishments, for the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Division. The ECUT Biocatalysis Project is managed by the Jet Propulsion Laboratory, California Institute of Technology. The Biocatalysis Project is a mission-oriented, applied research and exploratory development activity directed toward resolution of the major generic technical barriers that impede the development of biologically catalyzed commercial chemical production. The approach toward achieving project objectives involves an integrated participation of universities, industrial companies and government research laboratories. The Project's technical activities were organized into three work elements: (1) The Molecular Modeling and Applied Genetics work element includes research on modeling of biological systems, developing rigorous methods for the prediction of three-dimensional (tertiary) protein structure from the amino acid sequence (primary structure) for designing new biocatalysis, defining kinetic models of biocatalyst reactivity, and developing genetically engineered solutions to the generic technical barriers that preclude widespread application of biocatalysis. (2) The Bioprocess Engineering work element supports efforts in novel bioreactor concepts that are likely to lead to substantially higher levels of reactor productivity, product yields and lower separation energetics. Results of work within this work element will be used to establish the technical feasibility of critical bioprocess monitoring and control subsystems. (3) The Bioprocess Design and Assessment work element attempts to develop procedures (via user-friendly computer software) for assessing the energy-economics of biocatalyzed chemical production processes, and initiation of technology transfer for advanced bioprocesses.

  5. Manufacturing Methods and Technology Project Summary Reports.

    Science.gov (United States)

    1980-12-01

    as high speed machining. Except for the abrasive aluminum alloys like A356 which must be machined with carbide, either carbide or high speed steel...Shear Forging Processes for Missile 82 Primary Structure Project 376 3230 - Manufacturing Methods for High Speed Machining of 85 Aluminum Project 376 3231...Production Methods for Squeeze Castings 88 Projects 471 4312 and 472 4312 - Hard Face Coating to Aluminum Com- 91 ponents Project 576 6759

  6. Evaluation of Representative Smart Grid Investment Project Technologies: Demand Response

    Energy Technology Data Exchange (ETDEWEB)

    Fuller, Jason C.; Prakash Kumar, Nirupama; Bonebrake, Christopher A.

    2012-02-14

    This document is one of a series of reports estimating the benefits of deploying technologies similar to those implemented on the Smart Grid Investment Grant (SGIG) projects. Four technical reports cover the various types of technologies deployed in the SGIG projects, distribution automation, demand response, energy storage, and renewables integration. A fifth report in the series examines the benefits of deploying these technologies on a national level. This technical report examines the impacts of a limited number of demand response technologies and implementations deployed in the SGIG projects.

  7. Assessing the Relationship between Ethical Project Management and Information Technology Project Success

    Science.gov (United States)

    Howell, Byron Winter

    2010-01-01

    The purpose of this quantitative study was to assess the relationship between ethical project management and information technology (IT) project success. The success of IT projects is important for organizational success, but the rate of IT projects is historically low, costing billions of dollars annually. Using four key ethical variables…

  8. An overview of the Communications Technology Satellite (CTS) project

    Science.gov (United States)

    Rapp, W.; Ogden, D.; Wright, D.

    1982-01-01

    The Communications Technology Satellite (CTS) project is reviewed. A technical description of the CTS spacecraft and its cognate hardware and operations is included. A historical treatise of the CTS project is provided. Also presented is an overview of the CTS experiments and demonstrations conducted during the course of the project.

  9. Implementing Biogas Technology Project in Malvar, Batangas, Philippines

    Directory of Open Access Journals (Sweden)

    Juvy G. Mojares

    2015-11-01

    Full Text Available This study sought to determine the environmental and social impacts of the biogas technology project of the municipal government of Malvar, Batangas, Philippines, through the Municipal Environment and Natural Resources Office. Document analysis and interview were employed in this study. Results showed that heat and electricity generation from biogas decreased dependency on electricity and fuel oil.In terms of social impacts, the biogas technology contributed to socio-economic improvement of the barangay in the form of job creation, technological and skills transfer through training in biogas production, contribution to continuous pursuing of energy neutrality and encouraged sustainability development at the community level. Aside from these, the technology was a source of organic fertilizer for the farming community of Malvar. It is recommended that commercial farms be strictly monitored and ordinances be imposed on them specifically on the use of biogas technology. The municipal government could partner with GOs and NGOs providing grant or equipment for such technology. For the monitoring of backyard farms, develop close coordination with barangay officials, if it does not work, plan a consultative meeting with agencies concerned to explain the hazards of improper disposal of hog wastes.

  10. The Columbia River Protection Supplemental Technologies Quality Assurance Project Plan

    Energy Technology Data Exchange (ETDEWEB)

    Fix, N. J.

    2007-01-10

    The U.S. Department of Energy (DOE) has conducted interim groundwater remedial activities on the Hanford Site since the mid-1990s for several groundwater contamination plumes. DOE established the Columbia River Protection Supplemental Technologies Project (Technologies Project) in 2006 to evaluate alternative treatment technologies. The objectives for the technology project are as follows: develop a 300 Area polyphosphate treatability test to immobilize uranium, design and test infiltration of a phosphate/apatite technology for Sr-90 at 100-N, perform carbon tetrachloride and chloroform attenuation parameter studies, perform vadose zone chromium characterization and geochemistry studies, perform in situ biostimulation of chromium studies for a reducing barrier at 100-D, and perform a treatability test for phytoremediation for Sr-90 at 100-N. This document provides the quality assurance guidelines that will be followed by the Technologies Project. This Quality Assurance Project Plan is based on the quality assurance requirements of DOE Order 414.1C, Quality Assurance, and 10 CFR 830, Subpart A--Quality Assurance Requirements as delineated in Pacific Northwest National Laboratory’s Standards-Based Management System. In addition, the technology project is subject to the Environmental Protection Agency (EPA) Requirements for Quality Assurance Project Plans (EPA/240/B-01/003, QA/R-5). The Hanford Analytical Services Quality Assurance Requirements Documents (HASQARD, DOE/RL-96-68) apply to portions of this project and to the subcontractors. HASQARD requirements are discussed within applicable sections of this plan.

  11. Propulsive Descent Technologies (PDT): Original Content Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Future missions to Mars require landed mass that exceeds the capability of current entry, descent, and landing technology.  New technology and techniques are...

  12. Advanced Bimanual Manipulation Results from the DEXMART Project

    CERN Document Server

    2012-01-01

    Dexterous and autonomous manipulation is a key technology for the personal and service robots of the future. Advances in Bimanual Manipulation edited by Bruno Siciliano provides the robotics community with the most noticeable results of the four-year European project DEXMART (DEXterous and autonomous dual-arm hand robotic manipulation with sMART sensory-motor skills: A bridge from natural to artificial cognition). The volume covers a host of highly important topics in the field, concerned with modelling and learning of human manipulation skills, algorithms for task planning, human-robot interaction, and grasping, as well as hardware design of dexterous anthropomorphic hands. The results described in this five-chapter collection are believed to pave the way towards the development of robotic systems endowed with dexterous and human-aware dual-arm/hand manipulation skills for objects, operating with a high degree of autonomy in unstructured real-world environments.

  13. The Effects of the Project Champion's Leadership Style on Global Information Technology User Acceptance and Use

    Science.gov (United States)

    Ekiko, Mbong C.

    2014-01-01

    The research problem was the lack of knowledge about the effect of leadership style of the project champion on global information technology (IT) project outcomes, resulting in a high failure rate of IT projects accompanied by significant waste of resources. The purpose of this quantitative, nonexperimental study was to evaluate the relationship…

  14. Selected Test Results from the Encell Technology Nickel Iron Battery

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Summer Kamal Rhodes [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Advanced Power Sources R& D; Baca, Wes Edmund [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Advanced Power Sources R& D; Avedikian, Kristan [Encell Technology, Alachua, FL (United States)

    2014-09-01

    The performance of the Encell Nickel Iron (NiFe) battery was measured. Tests included capacity, capacity as a function of rate, capacity as a function of temperature, charge retention (28-day), efficiency, accelerated life projection, and water refill evaluation. The goal of this work was to evaluate the general performance of the Encell NiFe battery technology for stationary applications and demonstrate the chemistry's capabilities in extreme conditions. Test results have indicated that the Encell NiFe battery technology can provide power levels up to the 6C discharge rate, ampere-hour efficiency above 70%. In summary, the Encell batteries have met performance metrics established by the manufacturer. Long-term cycle tests are not included in this report. A cycle test at elevated temperature was run, funded by the manufacturer, which Encell uses to predict long-term cycling performance, and which passed their prescribed metrics.

  15. Ceramic Technology Project data base: September 1992 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1993-06-01

    Data presented in this report represent an intense effort to improve processing methods, testing methods, and general mechanical properties (rupture modulus, tensile, creep, stress-rupture, dynamic and cyclic fatigue, fracture toughness) of candidate ceramics for use in advanced heat engines. This work was performed by many facilities and represents only a small part of the data generated by the Ceramic Technology Project (CTP) since 1986. Materials discussed include GTE PY6, GN-10, NT-154, NT-164, SN-260, SN-251, SN-252, AY6, silicon nitride combined with rare-earth oxides, Y-TZP, ZTA, NC-433, NT-230, Hexoloy SA, MgO-PSZ-to-MgO-PSZ joints, MgO-PSZ-to-cast iron, and a few whisker/fiber-reinforced ceramics. Information in this report was taken from the project`s semiannual and bimonthly progress reports and from final reports summarizing the results of individual studies. Test results are presented in tabular form and in graphs. All data, including test rig descriptions and material characterizations, are stored in the CTP data base and are available to all project participants on request. The objective of this report is to make available the test results from these studies but not to draw conclusions from those data.

  16. Pilot Project Technology Business Case: Mobile Work Packages

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lawrie, Sean [ScottMadden, Inc., Raleigh, NC (United States); Niedermuller, Josef [ScottMadden, Inc., Raleigh, NC (United States)

    2015-05-01

    Performance advantages of the new pilot project technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on demonstrating actual cost reductions that can be credited to budgets and thereby truly reduce O&M or capital costs. Technology enhancements, while enhancing work methods and making work more efficient, often fail to eliminate workload such that it changes overall staffing and material cost requirements. It is critical to demonstrate cost reductions or impacts on non-cost performance objectives in order for the business case to justify investment by nuclear operators. The Business Case Methodology (BCM) was developed in September of 2015 to frame the benefit side of II&C technologies to address the “benefit” side of the analysis—as opposed to the cost side—and how the organization evaluates discretionary projects (net present value (NPV), accounting effects of taxes, discount rates, etc.). The cost and analysis side is not particularly difficult for the organization and can usually be determined with a fair amount of precision (not withstanding implementation project cost overruns). It is in determining the “benefits” side of the analysis that utilities have more difficulty in technology projects and that is the focus of this methodology. The methodology is presented in the context of the entire process, but the tool provided is limited to determining the organizational benefits only. This report describes a the use of the BCM in building a business case for mobile work packages, which includes computer-based procedures and other automated elements of a work package. Key to those impacts will be identifying where the savings are

  17. Getting Results in Housing: A Framework for Monitoring Results in Housing Projects: Using Measurable Indicators

    OpenAIRE

    Shlomo Angel; Michael Jacobs

    2006-01-01

    The aim of this paper is to help project teams develop results indicators for housing projects. These indicators are intended, primarily, as an instrument for managing projects and should help staff in the country offices, in headquarters and in executing agencies to identify the components of a project that are working as intended, and the ones that may need attention to keep the project on track. Additionally, the indicators can provide a foundation for project evaluations, at the mid-term ...

  18. Project Management Plan for the INEL technology logic diagrams

    Energy Technology Data Exchange (ETDEWEB)

    Rudin, M.J.

    1992-10-01

    This Project Management Plan (PjMP) describes the elements of project planning and control that apply to activities outlined in Technical Task Plan (TTP) ID-121117, ``Technology Logic Diagrams For The INEL.`` The work on this project will be conducted by personnel in EG&G Idaho, Inc.`s Waste Technology Development Program. Technology logic diagrams represent a formal methodology to identify technology gaps or needs within Environmental Restoration/Waste Management Operations, which will focus on Office of Environmental Restoration and Waste Management (EM-50) research and development, demonstration, test, and evaluation efforts throughout the US Department of Energy complex. This PjMP describes the objectives, organization, roles and responsibilities, workscope and processes for implementing and managing the technology logic diagram for the Idaho National Engineering Laboratory project.

  19. Project Management Plan for the INEL technology logic diagrams

    Energy Technology Data Exchange (ETDEWEB)

    Rudin, M.J.

    1992-10-01

    This Project Management Plan (PjMP) describes the elements of project planning and control that apply to activities outlined in Technical Task Plan (TTP) ID-121117, Technology Logic Diagrams For The INEL.'' The work on this project will be conducted by personnel in EG G Idaho, Inc.'s Waste Technology Development Program. Technology logic diagrams represent a formal methodology to identify technology gaps or needs within Environmental Restoration/Waste Management Operations, which will focus on Office of Environmental Restoration and Waste Management (EM-50) research and development, demonstration, test, and evaluation efforts throughout the US Department of Energy complex. This PjMP describes the objectives, organization, roles and responsibilities, workscope and processes for implementing and managing the technology logic diagram for the Idaho National Engineering Laboratory project.

  20. BMDO: New Mexico Technology Transfer Demonstration Project. Interim final report

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    The BMDO-New Mexico Technology Transfer Demonstration Project(BMDO-NM) was a collaborative effort among the national laboratories to identify and evaluate the commercial potential of selected SDI-funded technologies. The project was funded by BMDO (formerly known as the Strategic Defense Initiative Office or SDIO), the Technology Enterprise Division (NM-TED) of the NM Economic Development Division, and the three National Laboratories. The project was managed and supervised by SAGE Management Partners of Albuquerque, and project funding was administered through the University of New Mexico. The BMDO-NM Demonstration Project focused on the development of a process to assist technology developers in the evaluation of selected BMDO technology programs so that commercialization decisions can be made in an accelerated manner. The project brought together BMDO, the NM-TED, the University of New Mexico, and three New Mexico Federal laboratories -- Los Alamos (DOE), Phillips (DOD) and Sandia (DOE). Each national laboratory actively participated throughout the project through its technology transfer offices. New Mexico was selected as the site for the Demonstration Program because of its three national and federal research laboratories engaged in BMDO programs, and the existing relationship among state govemment, the labs, universities and local economic development and business assistance organizations. Subsequent Commercialization and Implementation phases for the selected technologies from LANL and SNL were completed by SAGE and the Project Team. Funding for those phases was provided by the individual labs as well as BMDO and NM-TED in kind services. NM-TED played a proactive role in this New Mexico partnership. Its mandate is to promote technology-based economic development, with a commitment to facilitate the use of technology by industry and business statewide. TED assumed the role of program manager and executing agent for BMDO in this demonstration project.

  1. Results of agile project management implementation in software engineering companies

    Directory of Open Access Journals (Sweden)

    Suetin Sergei

    2016-01-01

    Full Text Available Agile project management methodologies, tools and techniques have been becoming more and more popular among Russian and foreign software companies. Though the agile software project management methodologies appear to be more flexible and sound alternative to traditional project management approaches, the practice of agile project management implementation needs more research. The article presents the research on the practical results of agile project management implementation in Russian software engineering companies. The survey-based study covers 8 companies and 35 their projects managed with the help of agile methodologies. In contrast to some optimistic researchers of agile practices, the research findings show that in the investigated projects agile project management led to the deterioration of cost and schedule performance. However, the quality, both perceived by clients and assessed by internal technical analysts, improved after the implementation of agile software project management practices.

  2. Current Renewable Energy Technologies and Future Projections

    Energy Technology Data Exchange (ETDEWEB)

    Allison, Stephen W [ORNL; Lapsa, Melissa Voss [ORNL; Ward, Christina D [ORNL; Smith, Barton [ORNL; Grubb, Kimberly R [ORNL; Lee, Russell [ORNL

    2007-05-01

    The generally acknowledged sources of renewable energy are wind, geothermal, biomass, solar, hydropower, and hydrogen. Renewable energy technologies are crucial to the production and utilization of energy from these regenerative and virtually inexhaustible sources. Furthermore, renewable energy technologies provide benefits beyond the establishment of sustainable energy resources. For example, these technologies produce negligible amounts of greenhouse gases and other pollutants in providing energy, and they exploit domestically available energy sources, thereby reducing our dependence on both the importation of fossil fuels and the use of nuclear fuels. The market price of renewable energy technologies does not reflect the economic value of these added benefits.

  3. In-Space Propulsion (346620) Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Technologies include, but are not limited to, electric and advanced chemical propulsion, propellantless propulsion such as aerocapture and solar sails, sample return...

  4. Cryogenic MEMS Technology for Sensing Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The development of cryogenic microwave components, such as focal plane polarization modulators, first requires an RF MEMS switching technology that operates...

  5. A Survey of Technologies Supporting Virtual Project Based Learning

    DEFF Research Database (Denmark)

    Dirckinck-Holmfeld, Lone

    2002-01-01

    This paper describes a survey of technologies and to what extent they support virtual project based learning. The paper argues that a survey of learning technologies should be related to concrete learning tasks and processes. Problem oriented project pedagogy (POPP) is discussed, and a framework...... for evaluation is proposed where negotiation of meaning, coordination and resource management are identified as the key concepts in virtual project based learning. Three e-learning systems are selected for the survey, Virtual-U, Lotus Learningspace and Lotus Quickplace, as each system offers different strategies...... for e-learning. The paper concludes that virtual project based learning may benefit from facilities of all these systems....

  6. Q-Sync Motors in Commercial Refrigeration. Preliminary Test Results and Projected Benefits

    Energy Technology Data Exchange (ETDEWEB)

    Fricke, Brian A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Becker, Bryan R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-09-01

    This report provides background information on various fractional-horsepower electric motor technologies, summarizes initial data from a DOE-sponsored Q-Sync motor demonstration project, and extrapolates that data to project the potential economic and environmental benefits resulting from upgrading the current installed base of 9–12 W evaporator fan motors to Q-Sync motors.

  7. Further Results on Finitely Generated Projective Modules

    Institute of Scientific and Technical Information of China (English)

    WU Tong Suo

    2002-01-01

    In this paper, the exchange rings R whose primitive factor rings are artinian are studied.The following results are proved: for any exchange ring R and any two-sided ideal I of R, K0(π) :K0(R) → K0(R/I) is a group epimorphism with the kernel {[P] - [Q]|P = PI, Q = QI}; there is an isomorphism of ordered groups from Ko(R) to the group of all such functions fp: X → Q (P ∈ p(R)),where X is the set of all primitive ideals of R and Q, the rational integers.

  8. CONSIDERATION OF RECOMMENDATIONS AT INNOVATION-BASED PROJECTS RESULTS FORECASTING

    OpenAIRE

    Argov Nikita Vladimirovich

    2012-01-01

    The purpose of this paper is to highlight the importance of considering the factor of word-of-mouth communications between clients when analyzing the innovation-based projects. The paper offers the methodology of evaluating the importance of such analyses for different innovative projects. Results of the research are in the specifying the demand forecasting at innovation-based projects outcomes forecasting. Practical implications lie at the evaluation of such projects, specially by small and ...

  9. CONSIDERATION OF RECOMMENDATIONS AT INNOVATION-BASED PROJECTS RESULTS FORECASTING

    OpenAIRE

    Argov Nikita Vladimirovich

    2012-01-01

    The purpose of this paper is to highlight the importance of considering the factor of word-of-mouth communications between clients when analyzing the innovation-based projects. The paper offers the methodology of evaluating the importance of such analyses for different innovative projects. Results of the research are in the specifying the demand forecasting at innovation-based projects outcomes forecasting. Practical implications lie at the evaluation of such projects, specially by small and ...

  10. CNPC Appoints Chief Experts for Important Technological Projects

    Institute of Scientific and Technical Information of China (English)

    Zhao Jianzhong

    2006-01-01

    @@ On June 27th, China National Petroleum Corporation (CNPC) held a public recruitment to appoint chief experts in Beijing for its important technological projects, which is the first time for CNPC to appoint chief managers by the means of competitive recruitment. This recruitment covers four projects, such as drilling, logging, geophysical survey and ground engineering with 15 projects. Of those,there are 8 drilling projects, which make up 50 percent of all the important technological projects for public recruitment. CNPC expects to further boost the chief expert responsibility system and promote the research and development (R&D) of technological project on the basis of the public recruitment. The company completes the recruitment following the procedure of making announcement, conducting competitive recruitment and giving publicity. On July 25th, the appointment ceremony was held by CNPC and 15 experts were awarded the certificates. CNPC is entering a new stage for the implementation of the technology and talent strategy for the 11th Five-Year Plan. What's more, a new management mode is taking shape for the technological project and for the construction of technological personnel pool.

  11. FY 1997 report on the results of the industrial technology R and D project. Development of technology to use biological resources such as the complex biological system (Development of biological use petroleum substitution fuel production technology); 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Experimental researches were conducted and the FY 1997 results were reported with the aim of establishing analytical technology for the complex biological system by which the complex biological system can be analyzed in such a state as it is using the molecular biological method. In the study of the molecular genetic analytical technology, PCR primers used for amplification of topoisomerase II genes of the whole eukaryote was designed. As to the histochemical analytical technology, a study was made on the new constitution microorganism detection method by the hybridization method and the antibody specific dyeing method, and the following were conducted: manifestation in quantity of colibacillus and the recovery, refining, and construction of peptide library by fuzzy display method. Concerning the functional analytical technology, technological researches were made such as the environmental adaptation mechanism of high thermophile and the information transfer mechanism among bacteria through cell membranes for elucidation of the special environment detection/response mechanism and the special environment adaptation/resistance mechanism. As to the separation/culture technology, various anaerobic microorganisms were separated from marine sponge for the development of a method of culturing in 3D matrices. (NEDO)

  12. Slot Coupled Patch Array Antenna Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed project is an antenna array whose beam is controlled digitally. The Phase 1 effort will assess the method needed to achieve the gain, bandwidth, and...

  13. Success in large high-technology projects: What really works?

    Science.gov (United States)

    Crosby, P.

    2014-08-01

    Despite a plethora of tools, technologies and management systems, successful execution of big science and engineering projects remains problematic. The sheer scale of globally funded projects such as the Large Hadron Collider and the Square Kilometre Array telescope means that lack of project success can impact both on national budgets, and collaborative reputations. In this paper, I explore data from contemporary literature alongside field research from several current high-technology projects in Europe and Australia, and reveal common `pressure points' that are shown to be key influencers of project control and success. I discuss the how mega-science projects sit between being merely complicated, and chaotic, and explain the importance of understanding multiple dimensions of project complexity. Project manager/leader traits are briefly discussed, including capability to govern and control such enterprises. Project structures are examined, including the challenge of collaborations. I show that early attention to building project resilience, curbing optimism, and risk alertness can help prepare large high-tech projects against threats, and why project managers need to understand aspects of `the silent power of time'. Mission assurance is advanced as a critical success function, alongside the deployment of task forces and new combinations of contingency plans. I argue for increased project control through industrial-style project reviews, and show how post-project reviews are an under-used, yet invaluable avenue of personal and organisational improvement. Lastly, I discuss the avoidance of project amnesia through effective capture of project knowledge, and transfer of lessons-learned to subsequent programs and projects.

  14. Manufacturing Methods and Technology Project Summary Reports

    Science.gov (United States)

    1982-06-01

    variation. The goal of this FY78 project was to solve these problems, develop pilot line production of 200 ferrites , and test them. SWITCHING ...WIRES FERRITE HIGH &. DIELECTRIC ^ mm i ii ’&Z2ZL f M Figure 1 - Non-Reciprocal Latching Phase Shifter - Side Loaded Geometry 39 i SUMMARY...Control Manufacturing Modernization Plan 18 ELECTRONICS Project 273 9638 - Integrated Hybrid Transistor Switch for Solid 21 State Converter

  15. Recent results from the Rotamak project

    Energy Technology Data Exchange (ETDEWEB)

    Donaldson, N.; Euripides, P.; Jones, I.R.; Xu, S. [Flinders Univ. of South Australia, Bedford Park, SA (Australia). School of Physical Sciences

    1993-12-31

    The Rotamak is a very simple magnetic configuration: it is a small aspect ratio, toroidal plasma current ring kept in horizontal and vertical equilibrium by a `vertical` (tokamak terminology) magnetic field, in other words, a toroidal z-pinch. The unique feature that distinguishes it from other configurations is the fact that the toroidal current is driven in a steady, non-inductive manner by means of the application of a rotating magnetic field (RMF). By now, the possibility of using an RMF to drive steady plasma currents has been amply demonstrated and a straight forward description of the technique and its application in the Rotamak can be found, for example, in the review papers by Jones and the references contained therein. A description of the various components of a typical Rotamak device can also be found in these papers. During the past 2-3 years Rotamak experiments have been undertaken using RF generators which are capable of operating at power levels of up to ten times those of previously available generators. The purpose of this paper is to present some of the latest results obtained in high-powered experiments made with 10-litre and 50-litre spherical discharge vessels. (author) 5 refs., 3 figs.

  16. Ceramics Technology Project database: September 1991 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1992-06-01

    The piston ring-cylinder liner area of the internal combustion engine must withstand very-high-temperature gradients, highly-corrosive environments, and constant friction. Improving the efficiency in the engine requires ring and cylinder liner materials that can survive this abusive environment and lubricants that resist decomposition at elevated temperatures. Wear and friction tests have been done on many material combinations in environments similar to actual use to find the right materials for the situation. This report covers tribology information produced from 1986 through July 1991 by Battelle columbus Laboratories, Caterpillar Inc., and Cummins Engine Company, Inc. for the Ceramic Technology Project (CTP). All data in this report were taken from the project`s semiannual and bimonthly progress reports and cover base materials, coatings, and lubricants. The data, including test rig descriptions and material characterizations, are stored in the CTP database and are available to all project participants on request. Objective of this report is to make available the test results from these studies, but not to draw conclusions from these data.

  17. Sustainable manure management in the Baltic Sea Region - results, cases and project recommendations

    DEFF Research Database (Denmark)

    Tybirk, Knud; Luostarinen, S; Hamelin, Lorie;

    This magazine contains the major results, conclusions and recommendations of the project Baltic Forum for Innovative Technologies for Sustainable Manure Management (Baltic Manure) which via co-funding from Interreg Baltic Sea Region programme has been a Flagship project in the EU Strategy...... for the Baltic Sea Region from 2010-2013. The project has involved 18 partners from 8 countries with MTT Agrifood Research Finland as the Lead Partne...

  18. Sustainable manure management in the Baltic Sea Region - results, cases and project recommendations

    DEFF Research Database (Denmark)

    Tybirk, Knud; Luostarinen, S; Hamelin, Lorie

    This magazine contains the major results, conclusions and recommendations of the project Baltic Forum for Innovative Technologies for Sustainable Manure Management (Baltic Manure) which via co-funding from Interreg Baltic Sea Region programme has been a Flagship project in the EU Strategy...... for the Baltic Sea Region from 2010-2013. The project has involved 18 partners from 8 countries with MTT Agrifood Research Finland as the Lead Partne...

  19. Picosats for Autonomous Rendezvous and Docking Technology Demonstration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Over the next decade, a host of new technologies and capabilities will be needed by NASA to support Project Constellation. For risk reduction considerations, it is...

  20. Fabrication Technology for X-Ray Optics and Mandrels Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA has a cross-project need for large format aspheric x-ray optics, which, demonstrate exceptionally low periodic surface errors. Available technologies to both...

  1. The Role of the Project Management Office on Information Technology Project Success

    Science.gov (United States)

    Stewart, Jacob S.

    2010-01-01

    The rate of failed and challenged Information Technology (IT) projects is too high according to the CHAOS Studies by the Standish Group and the literature on project management (Standish Group, 2008). The CHAOS Studies define project success as meeting the triple constraints of scope, time, and cost. Assessing critical success factors is another…

  2. The Role of the Project Management Office on Information Technology Project Success

    Science.gov (United States)

    Stewart, Jacob S.

    2010-01-01

    The rate of failed and challenged Information Technology (IT) projects is too high according to the CHAOS Studies by the Standish Group and the literature on project management (Standish Group, 2008). The CHAOS Studies define project success as meeting the triple constraints of scope, time, and cost. Assessing critical success factors is another…

  3. Human Robotic Systems (HRS): Rover Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In FY15, the HRS Rover Technologies will begin design of a prototype rover designed for the lunar surface, begin development of resource efficient navigation...

  4. Advanced Manufacturing Technologies (AMT): Manufacturing Initiative Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA supports the Advanced Manufacturing National Program Office (AMNPO). Hosted by the National Institute of Standards and Technology (NIST) the AMNPO is...

  5. Braided Composite Technologies for Rotorcraft Structures Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed program will focus on the development of a new generation of advanced technology for rotorcraft transmission systems. This program will evaluate the...

  6. Braided Composite Technologies for Rotorcraft Structures Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Phase 2 effort will be used to advance the material and design technologies that were explored in the Phase 1 study of hybrid gears. In this hybrid approach, the...

  7. Extreme Environment Hybrid Gearbox Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Nearly all mechanism applications require some form of gearbox. Wet lubricated gearbox technologies are limited to the relatively narrow temperature ranges of their...

  8. Advanced Manufacturing Technologies (AMT): Advanced Near Net Shape Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop and mature manufacturing technology to enable fabrication of single-piece integrally-stiffened launch vehicle structures to replace expensive, heavy, and...

  9. Numerical modeling in photonic crystals integrated technology: the COPERNICUS Project

    DEFF Research Database (Denmark)

    Malaguti, Stefania; Armaroli, Andrea; Bellanca, Gaetano

    2011-01-01

    Photonic crystals will play a fundamental role in the future of optical communications. The relevance of the numerical modeling for the success of this technology is assessed by using some examples concerning the experience of the COPERNICUS Project.......Photonic crystals will play a fundamental role in the future of optical communications. The relevance of the numerical modeling for the success of this technology is assessed by using some examples concerning the experience of the COPERNICUS Project....

  10. Essays on Technology Adoption and Provision Efficiency in Development Projects

    OpenAIRE

    2016-01-01

    In many development projects, technologies with potential to improve welfare are under adopted and under-utilized once adopted. One possible cause for this inefficiency is ignoring fit risk (the risk the technology may not meet the needs of the potential adopter). This dissertation attempts to introduce fit risk in the development context and develops a framework to analyze resource misallocation when fit risk is not addressed by project donors and managers. We examine strategies to reduce fi...

  11. Numerical modeling in photonic crystals integrated technology: the COPERNICUS Project

    DEFF Research Database (Denmark)

    Malaguti, Stefania; Armaroli, Andrea; Bellanca, Gaetano

    2011-01-01

    Photonic crystals will play a fundamental role in the future of optical communications. The relevance of the numerical modeling for the success of this technology is assessed by using some examples concerning the experience of the COPERNICUS Project.......Photonic crystals will play a fundamental role in the future of optical communications. The relevance of the numerical modeling for the success of this technology is assessed by using some examples concerning the experience of the COPERNICUS Project....

  12. Recent Development and Preliminary Results of Chinese Meridian Project

    Institute of Scientific and Technical Information of China (English)

    WANG Chi; REN Liwen

    2013-01-01

    The Meridian Project is a ground-based network program to monitor solar-terrestrial space environment,which consists of a chain of 15 ground-based observatories located roughly along 120°E longitude and 30°N latitude.The Meridian project started in 2008,and its construction was completed by 2011.The integration and test phase of the Meridian Project conducted in 2011 demonstrated its observation capabilities as expected.The project will be in full operation in 2012.This report gives an overview of the recent development and preliminary results of the Meridian Project since 2010.

  13. Leadership Styles: Perceptions in Information Technology Project Teams

    Science.gov (United States)

    Fune, Roy P.

    2013-01-01

    The purpose of this study was to uncover Information Technology (IT) Project Managers' and IT Professionals' perceptions of effective leadership styles as they apply to project success. There have been prior studies dealing with the differences in perceptions between IT Functional Manager's leadership self-perception versus staff perceptions of…

  14. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  15. Leadership Styles: Perceptions in Information Technology Project Teams

    Science.gov (United States)

    Fune, Roy P.

    2013-01-01

    The purpose of this study was to uncover Information Technology (IT) Project Managers' and IT Professionals' perceptions of effective leadership styles as they apply to project success. There have been prior studies dealing with the differences in perceptions between IT Functional Manager's leadership self-perception versus staff perceptions of…

  16. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  17. Nuestra Tierra: A University/Public School Technology Integration Project.

    Science.gov (United States)

    Wiburg, Karin M.; Montoya, Nidelia; Sandin, John

    1999-01-01

    Describes a university/public school project to integrate technology with teaching and learning in a Southwest border school district. Discusses how the project was collaboratively designed, implemented, and evaluated by university faculty and school teachers and administrators. Findings demonstrated the potential of university researchers working…

  18. Leadership Styles: Perceptions in Information Technology Project Teams

    Science.gov (United States)

    Fune, Roy P.

    2013-01-01

    The purpose of this study was to uncover Information Technology (IT) Project Managers' and IT Professionals' perceptions of effective leadership styles as they apply to project success. There have been prior studies dealing with the differences in perceptions between IT Functional Manager's leadership self-perception versus staff…

  19. Manufacturing Methods and Technology Project Summary Reports

    Science.gov (United States)

    1982-12-01

    MORE INFORMATION 1 Additional information can be obtained from the project officer, Mr. Nathaniel Scott, ARRADCOM, AV 880-6945 or Commercial (201...QAM6, Mr. S. R. Caswell Cdr, Hawthorne AAP, Attn: SARHW-CO Cdr, Holston AAP, Attn: SARHO-CO Cdr, Indiana AAP, Attn: SARIN-CO AII-3 DRXIB-MT

  20. Fuel Cell Technology Status Analysis Project: Partnership Opportunities

    Energy Technology Data Exchange (ETDEWEB)

    2017-03-13

    Fact sheet describing the National Renewable Energy Laboratory's (NREL's) Fuel Cell Technology Status Analysis Project. NREL is seeking fuel cell industry partners from the United States and abroad to participate in an objective and credible analysis of commercially available fuel cell products to benchmark the current state of the technology and support industry growth.

  1. NASA Composite Cryotank Technology Project Game Changing Program

    Science.gov (United States)

    Fikes, John

    2015-01-01

    The fundamental goal of this project was to provide new and innovative cryotank technologies that enable human space exploration to destinations beyond low earth orbit such as the moon, near-earth asteroids, and Mars. The goal ... to mature technologies in preparation for potential system level flight demonstrations through significant ground-based testing and/or laboratory experimentation

  2. A Partnership Project: Integrating Computer Technology and Orff-Schulwerk.

    Science.gov (United States)

    Woody, Robert H.; Fredrickson, Julie M.

    2000-01-01

    Describes an alternative approach for general music educators wanting to study new instructional strategies in which a classroom teacher and university educator collaborated to explore the integration of computer technology with Orff-Schulwerk in second- and third-grade music classes. Discusses the project and two of its technology-assisted…

  3. Technology Transfer and Outreach for SNL/Rochester ALPHA Project.

    Energy Technology Data Exchange (ETDEWEB)

    Sinars, Daniel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-01-01

    This report describes the next stage goals and resource needs for the joint Sandia and University of Rochester ARPA-E project. A key portion of this project is Technology Transfer and Outreach, with the goal being to help ensure that this project develops a credible method or tool that the magneto-inertial fusion (MIF) research community can use to broaden the advocacy base, to pursue a viable path to commercial fusion energy, and to develop other commercial opportunities for the associated technology. This report describes an analysis of next stage goals and resource needs as requested by Milestone 5.1.1.

  4. Electrical Impedance Tomography Technology (EITT) Project

    Science.gov (United States)

    Oliva-Buisson, Yvette J.

    2014-01-01

    Development of a portable, lightweight device providing two-dimensional tomographic imaging of the human body using impedance mapping. This technology can be developed to evaluate health risks and provide appropriate medical care on the ISS, during space travel and on the ground.

  5. Force Project Technology Presentation to the NRCC

    Science.gov (United States)

    2014-02-04

    cycle engineering for: – Fuel Handling & Quality Surveillance Equipment – Water Purification , Handling, & Quality Equipment – Combat Engineer...Material Handling Equipment – Military Bridging – Fuels and Lubricants – Army Petroleum Laboratory • Respond to Maneuver Support Center of...Systems & Latrines  A gray water reuse technology (TRL 6) that treats water from current CSS equipment to include Water Purification Systems & Shower

  6. Beyond the management and dissemination of projects' results: stakeholders involvement and project co-design

    Science.gov (United States)

    L'Astorina, Alba; Tomasoni, Irene; Basoni, Anna; Carrara, Paola

    2015-04-01

    , namely the remote observations from satellite, aircraft technologies for UAVs and Internet technologies 2.0 for smart exchange of data. The methodology for collecting user requirements was recursive. Once identified target users, their "external needs" were investigated through qualitative tools such as semi - structured interviews. Thanks to the information provided by respondents subsequent deeper interviews were conducted from which additional requirements, such as further case studies and other beneficiaries were derived. During the process, also a second category of requirements, called "internal" emerged, derived from the mutual interactions between the domains of the project. The collection of requirements took more iterations, the results of which were summarized showing the expected contributions, products and by-products from stakeholders; starting from these elements each domain of the project reconstructed its state of the art in order to set methods and plan a work flow in a manner as close as possible to the needs of regional partners. The methodological issues involved both external and internal factors and stripped the complexity involved in the analysis of user needs in multi-domain, highlighting critical issues and operational difficulties but also providing interesting ideas for future developments.

  7. Ceramic Technology Project semiannual progress report, October 1992--March 1993

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1993-09-01

    This project was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. Although progress has been made in developing reliable structural ceramics, further work is needed to reduce cost. The work described in this report is organized according to the following work breakdown structure project elements: Materials and processing (monolithics [Si nitride, carbide], ceramic composites, thermal and wear coatings, joining, cost effective ceramic machining), materials design methodology (contact interfaces, new concepts), data base and life prediction (structural qualification, time-dependent behavior, environmental effects, fracture mechanics, nondestructive evaluation development), and technology transfer.

  8. A Project in Support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Young Cheol; Kim, Kyoung Pyo; Yi, Ji Ho (and others)

    2007-12-15

    The results and contents of the project are as follows; - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. - Domestic INIS project has carried out various activities on supporting a decision-making for INIS Secretariat, exchanges of the statistical information between INIS and the country, and technical assistance for domestic end-users using INIS database. - Based on the construction of INIS database sent by member states, the data published in the country has been gathered, collected, and inputted to INIS database according to the INIS reference series. - Using the INIS output data, it has provided domestic users with searching INIS CD-ROM DB and INIS online database, INIS SDI service, non-conventional literature delivery services and announce INIS to users. - Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy information and computer software developed in the advanced countries.

  9. Korea-China Optical Technology Research Centre Project

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Cheol Jung; Rhee, Y. J.; Jung, D. Y. and others

    2004-06-15

    The main objectives of this project are to establish the international collaboration basis of optical technologies between Korea and China. The combination of the Chinese advanced fundamental technologies with the Korean industrialization and commercialization infrastructures is realized, by ways of exchanging scientists and informations, holding joint seminars, cooperative utilization of research resources. On the ground of this establishment, the optical technologies of Korea are supposed to be leveled up to those of the world-most advanced. At the same time, for the improvement of mutual benefit and financial profit of both countries, providing technical advice and suggestions to the optical industries in the two countries is an another goal of this project. The state-of-the-arts of the Chinese technologies such as aerospace engineering, military defence technology, medical technology, laser fusion research, and so on, are known to be far above those of Korean and up to one of the most advanced in the world. Thus it is thought to be necessary that the acquisition of these technologies, implementation of joint research projects for technology development as well as the balanced opportunities for commercial product/sales and cooperation should be actively pursued in order to enhance the levels of Korean technologies in these fields.

  10. PROJECT W-551 INTERIM PRETREATMENT SYSTEM TECHNOLOGY SELECTION SUMMARY DECISION REPORT AND RECOMMENDATION

    Energy Technology Data Exchange (ETDEWEB)

    CONRAD EA

    2008-08-12

    This report provides the conclusions of the tank farm interim pretreatment technology decision process. It documents the methodology, data, and results of the selection of cross-flow filtration and ion exchange technologies for implementation in project W-551, Interim Pretreatment System. This selection resulted from the evaluation of specific scope criteria using quantitative and qualitative analyses, group workshops, and technical expert personnel.

  11. A Proposal to Manage Lessons Learned in Projects: Web 2.0 Technologies to Promote Innovation

    Directory of Open Access Journals (Sweden)

    Marcirio Silveira Chaves

    2014-06-01

    Full Text Available The web 2.0 is transforming the project management in organizations by improving communication and collaboration. The new generation of web-based collaborative tools provides much better experience than the traditional software package allowing document sharing, integrated task tracking, enforcing team processes and agile planning. Despite of the indubitable benefits brought by web 2.0, the use of these technologies to promote knowledge management remains unexplored. For many project managers to obtain and integrate information from different tools of previous similar projects in global organizations remains a challenge. This theoretical paper presents a proposal that suggests an innovation in the knowledge management area applying web 2.0 technologies. The main goal is to provide an integrated vision of a set of technologies that could be used by organizations in order to promote better management of lessons learned. The proposal includes the lessons learned processes (e.g. capture, share and dissemination, the process-based (e.g. project review and after action review and documentation-based (e.g. micro article and learning histories methods. Results show how web 2.0 technologies can help project managers and team project to cope with the main lessons learned processes and methods to learn from experience. Moreover, recommendations are made for the effective use of web 2.0 components promoting innovation and supporting lessons learned management in projects.Keywords: Project management; Lessons learned processes; lessons learned methods; project learning; web 2.0 technologies; innovation.

  12. Keynote presentation: Project Management, Technology and Evolving Work Processes

    DEFF Research Database (Denmark)

    Kampf, Constance Elizabeth

    Bridging the classroom and workplace is a challenge in the Project Management classroom because students rarely have the opportunity or the experience needed to head up large projects. So how can instructors present the opportunity to develop skills and gain experience needed to understand project...... management in a classroom setting? To begin to answer this question, the presentation describes three key strategies used in a Project Management course developed from a communications perspective in the International Bachelor Program in Marketing and Management Communication, Business & Social Sciences...... Management regardless of the technology used to support it....

  13. Didactics, Technology, and Organisation of Project Based Distance Education

    DEFF Research Database (Denmark)

    Knudsen, Morten Haack; Borch, Ole M.; Helbo, Jan

    2005-01-01

    The didactics, technology, and organization of an ICT supported distance engineering Master education are described. A systematic monitoring and evaluation of the basis year has given useful experience, subsequently used for adjustments and improvements. A successful on-campus project organized...... learning method applied at Aalborg University has been transferred to the off-campus situation. Experience show that didactic adjustments are required, in particular for obtaining an optimal balance between course and project work. Project collaboration in groups requires communication, synchronous as well......, was constructed. This system, called Uniflex, handles project work, courses, and exchange of information between the administrative coordinator, students and teachers....

  14. Los Alamos National Laboratory Tritium Technology Deployments Large Scale Demonstration and Deployment Project

    Energy Technology Data Exchange (ETDEWEB)

    McFee, J.; Blauvelt, D.; Stallings, E.; Willms, S.

    2002-02-26

    This paper describes the organization, planning and initial implementation of a DOE OST program to deploy proven, cost effective technologies into D&D programs throughout the complex. The primary intent is to accelerate closure of the projects thereby saving considerable funds and at the same time being protective of worker health and the environment. Most of the technologies in the ''toolkit'' for this program have been demonstrated at a DOE site as part of a Large Scale Demonstration and Deployment Project (LSDDP). The Mound Tritium D&D LSDDP served as the base program for the technologies being deployed in this project but other LSDDP demonstrated technologies or ready-for-use commercial technologies will also be considered. The project team will evaluate needs provided by site D&D project managers, match technologies against those needs and rank deployments using a criteria listing. After selecting deployments the project will purchase the equipment and provide a deployment engineer to facilitate the technology implementation. Other cost associated with the use of the technology will be borne by the site including operating staff, safety and health reviews etc. A cost and performance report will be prepared following the deployment to document the results.

  15. Gas Dynamic Spray Technology Demonstration Project Management. Joint Test Report

    Science.gov (United States)

    Lewis, Pattie

    2011-01-01

    The standard practice for protecting metallic substrates in atmospheric environments is the use of an applied coating system. Current coating systems used across AFSPC and NASA contain volatile organic compounds (VOCs) and hazardous air pollutants (HAPs). These coatings are sUbject to environmental regulations at the Federal and State levels that limit their usage. In addition, these coatings often cannot withstand the high temperatures and exhaust that may be experienced by Air Force Space Command (AFSPC) and NASA structures. In response to these concerns, AFSPC and NASA have approved the use of thermal spray coatings (TSCs). Thermal spray coatings are extremely durable and environmentally friendly coating alternatives, but utilize large cumbersome equipment for application that make the coatings difficult and time consuming to repair. Other concerns include difficulties coating complex geometries and the cost of equipment, training, and materials. Gas Dynamic Spray (GOS) technology (also known as Cold Spray) was evaluated as a smaller, more maneuverable repair method as well as for areas where thermal spray techniques are not as effective. The technology can result in reduced maintenance and thus reduced hazardous materials/wastes associated with current processes. Thermal spray and GOS coatings also have no VOCs and are environmentally preferable coatings. The primary objective of this effort was to demonstrate GDS technology as a repair method for TSCs. The aim was that successful completion of this project would result in approval of GDS technology as a repair method for TSCs at AFSPC and NASA installations to improve corrosion protection at critical systems, facilitate easier maintenance activity, extend maintenance cycles, eliminate flight hardware contamination, and reduce the amount of hazardous waste generated.

  16. SCINTILLA A European project for the development of scintillation detectors and new technologies for nuclear security

    CERN Document Server

    Alemberti, A; Botta, E; De Vita, R; Fanchini, E; Firpo, G

    2014-01-01

    Europe monitors transits using radiation detectors to prevent illicit trafficking of nuclear materials. The SCINTILLA project aims to develop a toolbox of innovative technologies designed to address different usage cases. This article will review the scope, approach, results of the first benchmark campaign and future plans of the SCINTILLA project.

  17. First results of the SDHCAL technological prototype

    CERN Document Server

    Haddad, Y

    2014-01-01

    The CALICE Semi-digital hadronic calorimeter built in 2011, was installed and tested during two periods of two weeks each in 2012 at CERN SPS facilities. The detector has more than 450000 channels with a semi-digital readout distributed on 48 layers with efficiency exceeding 95%. It has been run using the trigger-less and power pulsing modes. Data have been collected with muon, electron and hadron beams in the energy range between 5 and 80 GeV. This contribution focuses on the performances, the shower selection methods and on the first results on the calibration using pions.

  18. NASA Fixed Wing Project: Green Technologies for Future Aircraft Generation

    Science.gov (United States)

    DelRosario, Ruben

    2014-01-01

    The NASA Fundamental Aeronautics Fixed Wing (FW) Project addresses the comprehensive challenge of enabling revolutionary energy efficiency improvements in subsonic transport aircraft combined with dramatic reductions in harmful emissions and perceived noise to facilitate sustained growth of the air transportation system. Advances in multidisciplinary technologies and the development of unconventional aircraft systems offer the potential to achieve these improvements. The presentation will highlight the FW Project vision of revolutionary systems and technologies needed to achieve the challenging goals of aviation. Specifically, the primary focus of the FW Project is on the N+3 generation that is, vehicles that are three generations beyond the current state of the art, requiring mature technology solutions in the 2025-30 timeframe.

  19. Disruption of Information Technology Projects: The Reactive Decoupling of Project Management Methodologies

    Science.gov (United States)

    Schmitz, Kurt W.

    2013-01-01

    Information Technology projects have migrated toward two dominant Project Management (PM) methodologies. Plan-driven practices provide organizational control through highly structured plans, schedules, and specifications that facilitate oversight by hierarchical bureaucracies. In contrast, agile practices emphasize empowered teams using flexible…

  20. Disruption of Information Technology Projects: The Reactive Decoupling of Project Management Methodologies

    Science.gov (United States)

    Schmitz, Kurt W.

    2013-01-01

    Information Technology projects have migrated toward two dominant Project Management (PM) methodologies. Plan-driven practices provide organizational control through highly structured plans, schedules, and specifications that facilitate oversight by hierarchical bureaucracies. In contrast, agile practices emphasize empowered teams using flexible…

  1. Technological Innovation Projects: Proposal For an Integrative Model Between Project Management and Knowledge Management in a Customer-Supplier Perspective

    Directory of Open Access Journals (Sweden)

    Edval da Silva Tavares

    2014-10-01

    Full Text Available In face of strong competition, companies in Brazil have increased their financial investments in automation, offering new products and services and reducing operating costs. These companies are focusing their efforts on core competencies and, therefore, they often lack the internal expertise to implement new projects, especially those that bring technological innovation. For this reason, we use the processes of outsourcing or subcontracting to help implement such projects. The unit of analysis in this study is the project and the object of the study to analyze the process of knowledge transfer from a provider to a customer during the duration of the project, which involves new technologies. The main motivation of this work is to address the acquisition and retention of new knowledge related to projects designed for business customers. We have developed a study of three cases of multiple financial firms that buy new technologies and two suppliers of information technology. As a practical result, a management model of knowledge transfer and retention of knowledge in client companies is proposed and incorporated into project management.

  2. Influence of Strategic Management Project Portfolio in Technological Development

    OpenAIRE

    Bitencourt, Lorene Carvalho; Garcez, Marcos Paixão

    2013-01-01

    This text aims to present a case of a multinational company that acts in construction and furniture markets. For three years ago the company had implemented an area of portfolio project management with objective of using strategic criteria to select project that contributes with technologic development of the company. The methodology of this study was grounded in Castro and Carvalho theoretical reference for analyze the implementation process and the tools used by portfolio management. The re...

  3. REGULATORY FUNDAMENTALS FOR IMPLEMENTATION OF INFORMATION TECHNOLOGY PROJECTS IN INDUSTRY

    Directory of Open Access Journals (Sweden)

    L. V. Gubich

    2016-01-01

    Full Text Available The article provides an overview of the existing regulatory basis for the development of IIST. The features of IT projects management and a brief description of methodological recommendations on implementation of IT projects of the State scientific and technical Program «Electronic enterprise resource planning (CALS-ERP-technology» for 2011–2015 are considered.

  4. Ceramic Technology Project. Semiannual progress report, April 1991--September 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS`s Materials Development Program, was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

  5. Collaborative Project-Based Learning: An Integrative Science and Technological Education Project

    Science.gov (United States)

    Baser, Derya; Ozden, M. Yasar; Karaarslan, Hasan

    2017-01-01

    Background: Blending collaborative learning and project-based learning (PBL) based on Wolff (2003) design categories, students interacted in a learning environment where they developed their technology integration practices as well as their technological and collaborative skills. Purpose: The study aims to understand how seventh grade students…

  6. Application of Technology in Project-Based Distance Learning

    Directory of Open Access Journals (Sweden)

    Ali Mehrabian

    2008-06-01

    Full Text Available Present technology and the accessibility of internet have made distance learning easier, more efficient, and more convenient for students. This technology allows instructors and students to communicate asynchronously, at times and locations of their own choosing, by exchanging printed or electronic information. The use of project-based approach is being recognized in the literature as a potential component of courses in the faculties of engineering, science, and technology. Instructors may have to restructure their course differently to accommodate and facilitate the effectiveness of distance learning. A project-based engineering course, traditionally taught in a classroom settings using live mode at the College of Engineering and Computer Sciences at the University of Central Florida (UCF has been transformed to a distance course taught using distance modes. In this case, pedagogical transitions and adjustments are required, in particular for obtaining an optimal balance between the course material and the project work. Project collaboration in groups requires communication, which is possible with extensive utilization of new information and communication technology, such as virtual meetings. This paper discusses the course transition from live to distance modes and touches on some issues as they relate to the effectiveness of this methodology and the lessons learned from its application within different context. More specifically, this discussion includes the benefit of implementing project-based work in the domain of the distance learning courses.

  7. Didactics, Technology, and Organisation of Project Based Distance Education

    DEFF Research Database (Denmark)

    Knudsen, Morten Haack; Borch, Ole M.; Helbo, Jan

    2005-01-01

    learning method applied at Aalborg University has been transferred to the off-campus situation. Experience show that didactic adjustments are required, in particular for obtaining an optimal balance between course and project work. Project collaboration in groups requires communication, synchronous as well...... as asynchronous, which is possible with extensive utilization of new information and communication technology. Virtual meetings are conducted with text, sound and video based communication. Also the organization requires technology. A new learning management system, specifically designed to the didactic form...

  8. Job Diagnostic Survey: A Team Project Information Technology Perspective

    Directory of Open Access Journals (Sweden)

    Renato Telles

    2016-10-01

    Full Text Available This work aims to understand the effects of management styles on the work motivation of a team project in the telecommunications information technology context. To understand this complex behavior, we use the Job Diagnostic Survey methodology. In this critical analysis, we identify the main factors for failure in the field of telecommunications. The managers need to implement a methodology and define processes and formal procedures that need to be applied during the development of projects to mitigate the risk of failure and maintain control over it. One of the main findings in this research is associated with challenges and motivation by the Information Technology (IT professionals.

  9. Postface "The GITEWS Projectresults, summary and outlook"

    Directory of Open Access Journals (Sweden)

    U. Münch

    2011-03-01

    Full Text Available This paper reflects the experiences and results gained during the GITEWS project (German Indonesian Tsunami Early Warning System, which was funded by the Federal German Ministry of Education and Research between spring 2005 and spring 2011. Many of the individual results have been presented at international conferences and in international journals. The NHESS special issue offers a comprehensive overview of the key findings within the project and the first phase of operation of the warning system.

  10. Geothermal Reservoir Technology Research Program: Abstracts of selected research projects

    Energy Technology Data Exchange (ETDEWEB)

    Reed, M.J. (ed.)

    1993-03-01

    Research projects are described in the following areas: geothermal exploration, mapping reservoir properties and reservoir monitoring, and well testing, simulation, and predicting reservoir performance. The objectives, technical approach, and project status of each project are presented. The background, research results, and future plans for each project are discussed. The names, addresses, and telephone and telefax numbers are given for the DOE program manager and the principal investigators. (MHR)

  11. Pipeline cost reduction through effective project management and applied technology

    Energy Technology Data Exchange (ETDEWEB)

    Jenkins, A. [TransCanada Pipeline Ltd., Alberta (Canada); Babuk, T. [Empress International Inc., Westwood, NJ (United States); Mohitpour, M. [Tempsys Pipeline Solutions Inc., Vancouver, BC (Canada); Murray, M.A. [National Energy Board of Canada (Canada)

    2005-07-01

    Pipelines are regarded by many as passive structures with the technology involved in their construction and operation being viewed as relatively simple and stable. If such is the case how can there be much room for cost improvement? In reality, there have been many technological and regulatory innovations required within the pipeline industry to meet the challenges posed by ever increasing consumer demand for hydrocarbons, the effects of aging infrastructure and a need to control operating and maintenance expenditures. The importance of technology management, as a subset of overall project management, is a key element of life cycle cost control. Assurance of public safety and the integrity of the system are other key elements in ensuring a successful pipeline project. The essentials of best practise project management from an owner/ operator's perspective are set out in the paper. Particular attention is paid to the appropriate introduction of new technology, strategic procurement practice and material selection, indicating that capital cost savings of up to 15% are achievable without harming life cycle cost. The value of partnering leading to technical innovation, cost savings and improved profitability for all the participants is described. Partnering also helps avoid duplicated effort through the use of common tools for design, planning schedule tracking and reporting. Investing in appropriate technology development has been a major source of cost reduction in recent years and the impact of a number of these recently introduced technologies in the areas of materials, construction processes and operation and maintenance are discussed in the paper. (author)

  12. Summary results of an assessment of research projects in the superconductivity for electric power systems program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-10-01

    The Office of Program Analysis undertook an assessment of 37 research projects sponsored by the High Temperature Superconductivity Program. This report summarizes the results of the review. Rating factors included scientific and technical merit, mission relevance, appropriateness and level of innovation, quality of project team, productivity, and probable impact on the program`s mission. Some research needs and opportunities are described that were identified by the reviewers in the areas of wire development, deposited film technology, and systems development.

  13. Space technology and robotics in school projects

    Science.gov (United States)

    Villias, Georgios

    2016-04-01

    Space-related educational activities is a very inspiring and attractive way to involve students into science courses, present them the variety of STEM careers that they can follow, while giving them at the same time the opportunity to develop various practical and communication skills necessary for their future professional development. As part of a large scale extracurricular course in Space Science, Space Technology and Robotics that has been introduced in our school, our students, divided in smaller groups of 3-4 students in each, try to understand the challenges that current and future space exploration is facing. Following a mixture of an inquiry-based learning methodology and hands-on practical activities related with constructions and experiments, students get a glimpse of the pre-mentioned fields. Our main goal is to gain practical knowledge and inspiration from the exciting field of Space, to attain an adequate level of team spirit and effective cooperation, while developing technical and research data-mining skills. We use the following two approaches: 1. Constructive (Technical) approach Designing and constructing various customized robotic machines, that will simulate the future space exploration vehicles and satellites needed to study the atmosphere, surface and subsurface of planets, moons or other planetary bodies of our solar system that have shown some promising indications for the existence of life, taking seriously into account their special characteristics and known existing conditions (like Mars, Titan, Europa & Enceladus). The STEM tools we use are the following: - LEGO Mindstorms: to construct rovers for surface exploration. - Hydrobots: an MIT's SeaPerch program for the construction of submarine semi-autonomous robots. - CanSats: Arduino-based microsatellites able to receive, record & transmit data. - Space balloons: appropriate for high altitude atmospheric measurements & photography. 2. Scientific approach Conducting interesting physics

  14. FY 2000 Industrial science and technology research and development themes - cooperative project with academic circles. Report on the results of research and development of technologies for creating new bioaffinity molecules using submicron beads (Development of technologies for rational use of energy); 2000 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho. Energy shiyo gorika gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of the research and development for creating new bioaffinity molecules using submicron beads. The program for development of technology for analyzing chemical-biomolecule complexes using submicron affinity beads has developed a detachable linker which allows the complex, composed of ligand on the affinity latex particle surfaces and receptor bound thereto, to be detached directly from the particles, and also developed the prototype of magnetite-containing polymer particles with a diameter of submicron order, which facilitate recovery of the affinity latex. The program for development of technology to create chemical substances with new functions has successfully constructed the focused library composed of 400 compounds based on the split and pool method for FR225659 as a glucose modulator, chosen as the target material. It also has established the method of synthesizing opioid alkaloid as the target compound on the solid phase, and synthesized 39 opioid compounds with condensed indol rings, having diverse of several substituents. (NEDO)

  15. Fiscal 1998 R and D project on global environmental industrial technology. Research result report on DNA analysis and information processing technology for photosynthesis microorganisms (Development of CO{sub 2} fixation and effective use technology by using bacteria and algae); 1998 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Kogosei biseibutsu nado DNA kaiseki joho shori gijutsu no kenkyu (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the fiscal 1998 research result on DNA analysis and information processing technology for photosynthesis microorganisms. On the study on DNA analysis technology by triple-strand formation method, as the comparison study result of a READ method, stable triple- strand formation method and hairpin method, a READ method showed the highest triple-strand formation efficiency for target DNA. On the study on accurate separation technology of specific genes, establishment of protocols was promoted for solid-phase probe technology, subtract technology and leveling technology. On the study on DNA microarray analysis technology by high-efficiency hybridization method, the analysis technology of genes by hybridization method using DNA chips is under investigation. In addition, the high- efficiency analysis technology of specific DNA segments by using an affinity sensor, and the high-accuracy cloning technology for DNA with altered primary structure were also studied. (NEDO)

  16. Projects at the Western Environmental Technology Office. Quarterly technical progress report, January 1--March 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    This quarterly report briefly describes recent progress in eight projects. The projects are entitled Biomass Remediation Project; Heavy Metal-Contaminated Soil Project; MHD Shutdown; Mine Waste Technology Program; Plasma Projects; Resource Recovery Project; Spray Casting Project; and Watervliet Arsenal Project.

  17. Projects at the Western Environmental Technology Office. Quarterly technical progress report, January 1--March 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    This quarterly report briefly describes recent progress in eight projects. The projects are entitled Biomass Remediation Project; Heavy Metal-Contaminated Soil Project; MHD Shutdown; Mine Waste Technology Program; Plasma Projects; Resource Recovery Project; Spray Casting Project; and Watervliet Arsenal Project.

  18. Several Legal Issues Relating to Service Technological Results

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    How "the rights and interests in the intellectual property rights of the scientists and technicians should be protected and the entity achieving the service-related technological results should remunerate, under law, those achieving the service-related technological results and those making outstanding contribution to the transfer of the technological results" are important issues encountered in China in its efforts to improve its innovation capacity and build up a new nation. The current legal system in...

  19. Manufacturing Methods and Technology Project Summary Reports

    Science.gov (United States)

    1986-07-01

    for titanium blades. Early in Phase I of this effort, a shift to steel blades for the engine reduced the saving available by this process. This...the copper cladding peeling off the uranium core resulted in interference with the rotation of the rod. Removal of the copper cladding by pickling ...conducted on five full length extruded rods that were pickled and rotary straightened at ambient temperature. All five rods were proc ssed without incident

  20. Ubiquitous Learning Project Using Life-Logging Technology in Japan

    Science.gov (United States)

    Ogata, Hiroaki; Hou, Bin; Li, Mengmeng; Uosaki, Noriko; Mouri, Kosuke; Liu, Songran

    2014-01-01

    A Ubiquitous Learning Log (ULL) is defined as a digital record of what a learner has learned in daily life using ubiquitous computing technologies. In this paper, a project which developed a system called SCROLL (System for Capturing and Reusing Of Learning Log) is presented. The aim of developing SCROLL is to help learners record, organize,…

  1. OCTAVIUS: a FP7 project demonstrating CO2 capture technologies

    NARCIS (Netherlands)

    Broutin, P.; Kvamsdal, H.M.; La Marca, C.; Os, P.J. van; Robinson, L.

    2014-01-01

    The OCTAVIUS project (Optimisation of CO2 Capture Technology Allowing Verification and Implementation at Utility Scale) has started on March 1st 2012 for a period of 5 years, as part of the 7th Framework Programme of the European Commission. Gathering 15 European and 2 South African partners,

  2. Proceedings of the Nuclear Criticality Technology and Safety Project Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, R.G. [comp.

    1994-01-01

    This report is the proceedings of the annual Nuclear Criticality Technology and Safety Project (NCTSP) Workshop held in Monterey, California, on April 16--28, 1993. The NCTSP was sponsored by the Department of Energy and organized by the Los Alamos Critical Experiments Facility. The report is divided into six sections reflecting the sessions outlined on the workshop agenda.

  3. OCTAVIUS: a FP7 project demonstrating CO2 capture technologies

    NARCIS (Netherlands)

    Broutin, P.; Kvamsdal, H.M.; La Marca, C.; Os, P.J. van; Robinson, L.

    2014-01-01

    The OCTAVIUS project (Optimisation of CO2 Capture Technology Allowing Verification and Implementation at Utility Scale) has started on March 1st 2012 for a period of 5 years, as part of the 7th Framework Programme of the European Commission. Gathering 15 European and 2 South African partners, OCTAVI

  4. Ubiquitous Learning Project Using Life-Logging Technology in Japan

    Science.gov (United States)

    Ogata, Hiroaki; Hou, Bin; Li, Mengmeng; Uosaki, Noriko; Mouri, Kosuke; Liu, Songran

    2014-01-01

    A Ubiquitous Learning Log (ULL) is defined as a digital record of what a learner has learned in daily life using ubiquitous computing technologies. In this paper, a project which developed a system called SCROLL (System for Capturing and Reusing Of Learning Log) is presented. The aim of developing SCROLL is to help learners record, organize,…

  5. 5th China Fujian Technology And Projects Fair

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The Fifth China (Fujian) Technology and Projects Fair (CFTPF), which was held on June 18-20 in Fuzhou, capital of Fujian Province, proved a big success, allowing an increasing number of businesses to participate and find new opportunities. In three days,

  6. Ceramic Technology Project database: March 1990 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1992-07-01

    This report is the fifth in a series of semiannual data summary reports on information being stored in the Ceramic Technology Project (CTP) database. The overall system status as of March 31, 1990, is summarized, and the latest additions of ceramic mechanical properties data are given for zirconia, silicon carbide, and silicon nitride ceramic mechanical properties data, including some properties on brazed specimens.

  7. Expert system for economic evaluation of technological projects

    Directory of Open Access Journals (Sweden)

    Bohumil Hlavenka

    2001-01-01

    Full Text Available Apart from the technical level, a basic tool for decision-making and realization of the technical innovation project is also its economic effectiveness. It is assessed by comparing expenses and effects with respect to all-society interests and standards valid in a relevant period for the areas of technology, economy, ecology, safety of work, etc.

  8. Developing Instructional Technology Products Using Effective Project Management Practices

    Science.gov (United States)

    Allen, Stephanie; Hardin, Paul C.

    2008-01-01

    Delivering a successful instructional technology (IT) product depends on more than just having an extremely creative instructional solution or following an instructional systems design (ISD) model. Proper planning, direction, and execution of the project are require, as well. We present a model of management that encompasses the ISD process. Five…

  9. Project to demonstrate key technologies for native medicines

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ Aresearch project on the demonstration of key technologies for developing medicines and pharmacy of Chinese minorities will soon be started at the CAS Northwest Institute of Plateau Biology (NWIPB). From 3 to 5 November, 2008, a forum to appraise its implementation approaches was held in Xining, capital of northwest China's Qinghai Province.

  10. Materials Development Program: Ceramic Technology Project bibliography, 1984--1992

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The Ceramic Technology [for Advanced Heat Engines] Project was begun in 1983 to meet the ceramic materials needs of the companion DOE automotive engine program, the Advanced Gas Turbine (AGT) project, and the Heavy Duty Transport (low-heat-rejection, heavy-duty diesel) project. Goal is to develop an industry technology base for reliable and cost effective ceramics for applications in advanced automotive gas turbine and diesel engines. Research areas were identified following extensive input from industry and academia. Majority of research is done by industry (60%); work is also done at colleges and universities, in-house, and at other national laboratories and government agencies. In the beginning, reliability of ceramic components was the key issue. The reliability issues have largely been met and, at the present time, cost is the driving issue, especially in light of the highly cost-sensitive automotive market. Emphasis of the program has now been shifted toward developing cost-effective ceramic components for high-performance engines in the near-term. This bibliography is a compilation of publications done in conjunction with the Ceramic Technology Project since its beginning. Citations were obtained from reports done by participants in the project. We have tried to limit citations to those published and easily located. The end date of 1992 was selected.

  11. Learning to make technology work - a study of learning in technology demonstration projects

    DEFF Research Database (Denmark)

    Sutherland Olsen, Dorothy; Andersen, Per Dannemand

    2014-01-01

    Building working demonstrations of new technologies within sustainable energy and transport has become an important activity in the move towards a more energy efficient society. The work involved in building these demonstrations is usually organised in a project with a variety of different...... participants, including users. The aim of the project is usually to test the technology and promote changes in users habits, while learning is frequently cited as the main outcome. In this paper we review existing studies of demonstration projects and try to gain an overview of the main aims and effects...

  12. Demonstration Project 111, ITS/CVO Technology Truck, Final Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Gambrell, KP

    2002-01-11

    In 1995, the planning and building processes began to design and develop a mobile demonstration unit that could travel across the nation and be used as an effective outreach tool. In 1997, the unit was completed; and from June 1997 until December 2000, the Federal Highway Administration (FHWA)/Federal Motor Carrier Safety Administration (FMCSA) mobilized the Technology Truck, also known as Demonstration Project No. 111, ''Advanced Motor Carrier Operations and Safety Technologies.'' The project featured the latest available state-of-the-practice intelligent transportation systems (ITS) technologies designed to improve both the efficiency and safety of commercial vehicle operations (CVO). The Technology Truck was designed to inform and educate the motor carrier community and other stakeholders regarding ITS technologies, thus gaining support and buy-in for participation in the ITS program. The primary objective of the project was to demonstrate new and emerging ITS/CVO technologies and programs, showing their impact on motor carrier safety and productivity. In order to meet the objectives of the Technology Truck project, the FHWA/FMCSA formed public/private partnerships with industry and with Oak Ridge National Laboratory to demonstrate and display available ITS/CVO technologies in a cooperative effort. The mobile demonstration unit was showcased at national and regional conferences, symposiums, universities, truck shows and other venues, in an effort to reach as many potential users and decision makers as possible. By the end of the touring phase, the ITS/CVO Technology Truck had been demonstrated in 38 states, 4 Canadian provinces, 88 cities, and 114 events; been toured by 18,099 people; and traveled 115,233 miles. The market penetration for the Technology Truck exceeded 4,000,000, and the website received more than 25,000 hits. In addition to the Truck's visits, the portable ITS/CVO kiosk was demonstrated at 31 events in 23 cites in 15

  13. Ceramic Technology Project semiannual progress report, April 1992--September 1992

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1993-07-01

    This project was developed to meet the ceramic technology requirements of the DOE Office of Transportation Systems` automotive technology programs. Significant progress in fabricating ceramic components for DOE, NASA, and DOE advanced heat engine programs show that operation of ceramic parts in high-temperature engines is feasible; however, addition research is needed in materials and processing, design, and data base and life prediction before industry will have a sufficient technology base for producing reliable cost-effective ceramic engine components commercially. A 5-yr project plan was developed, with focus on structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines.

  14. Risk management in methodologies of information technology and communications projects

    Directory of Open Access Journals (Sweden)

    Jonathan Carrillo

    2013-12-01

    Full Text Available (Received: 2013/10/02 - Accepted: 2013/12/13At present there are methodologies that have several alternatives and methods to manage projects of Information and Communication Technologies. However, these do not cover a solution for the technology events that can occur in the industry, government, education, among others. In the technology market there are several models to identify and analyze risks according to relevant aspects of their area of specialty e.g. projects, in software development, communications, information security and business alignment. For this reason, this research conducted an evaluation of risk management activities of the methodologies used mostly to know which of them includes more correspondence with basic elements of IT using a rating scale.

  15. Project Morpheus: Lessons Learned in Lander Technology Development

    Science.gov (United States)

    Olansen, Jon B.; Munday, Stephen R.; Mitchell, Jennifer D.

    2013-01-01

    NASA's Morpheus Project has developed and tested a prototype planetary lander capable of vertical takeoff and landing, that is designed to serve as a testbed for advanced spacecraft technologies. The lander vehicle, propelled by a LOX/Methane engine and sized to carry a 500kg payload to the lunar surface, provides a platform for bringing technologies from the laboratory into an integrated flight system at relatively low cost. Designed, developed, manufactured and operated in-house by engineers at Johnson Space Center, the initial flight test campaign began on-site at JSC less than one year after project start. After two years of testing, including two major upgrade periods, and recovery from a test crash that caused the loss of a vehicle, flight testing will evolve to executing autonomous flights simulating a 500m lunar approach trajectory, hazard avoidance maneuvers, and precision landing, incorporating the Autonomous Landing and Hazard Avoidance (ALHAT) sensor suite. These free-flights are conducted at a simulated planetary landscape built at Kennedy Space Center's Shuttle Landing Facility. The Morpheus Project represents a departure from recent NASA programs and projects that traditionally require longer development lifecycles and testing at remote, dedicated testing facilities. This paper expands on the project perspective that technologies offer promise, but capabilities offer solutions. It documents the integrated testing campaign, the infrastructure and testing facilities, and the technologies being evaluated in this testbed. The paper also describes the fast pace of the project, rapid prototyping, frequent testing, and lessons learned during this departure from the traditional engineering development process at NASA's Johnson Space Center.

  16. Lesion insertion in the projection domain: Methods and initial results

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Baiyu; Leng, Shuai; Yu, Lifeng; Yu, Zhicong; Ma, Chi; McCollough, Cynthia, E-mail: mccollough.cynthia@mayo.edu [Department of Radiology, Mayo Clinic, Rochester, Minnesota 55905 (United States)

    2015-12-15

    Purpose: To perform task-based image quality assessment in CT, it is desirable to have a large number of realistic patient images with known diagnostic truth. One effective way of achieving this objective is to create hybrid images that combine patient images with inserted lesions. Because conventional hybrid images generated in the image domain fails to reflect the impact of scan and reconstruction parameters on lesion appearance, this study explored a projection-domain approach. Methods: Lesions were segmented from patient images and forward projected to acquire lesion projections. The forward-projection geometry was designed according to a commercial CT scanner and accommodated both axial and helical modes with various focal spot movement patterns. The energy employed by the commercial CT scanner for beam hardening correction was measured and used for the forward projection. The lesion projections were inserted into patient projections decoded from commercial CT projection data. The combined projections were formatted to match those of commercial CT raw data, loaded onto a commercial CT scanner, and reconstructed to create the hybrid images. Two validations were performed. First, to validate the accuracy of the forward-projection geometry, images were reconstructed from the forward projections of a virtual ACR phantom and compared to physically acquired ACR phantom images in terms of CT number accuracy and high-contrast resolution. Second, to validate the realism of the lesion in hybrid images, liver lesions were segmented from patient images and inserted back into the same patients, each at a new location specified by a radiologist. The inserted lesions were compared to the original lesions and visually assessed for realism by two experienced radiologists in a blinded fashion. Results: For the validation of the forward-projection geometry, the images reconstructed from the forward projections of the virtual ACR phantom were consistent with the images physically

  17. A Quantitative Study into the Information Technology Project Portfolio Practice: The Impact on Information Technology Project Deliverables

    Science.gov (United States)

    Yu, Wei

    2013-01-01

    This dissertation applied the quantitative approach to the data gathered from online survey questionnaires regarding the three objects: Information Technology (IT) Portfolio Management, IT-Business Alignment, and IT Project Deliverables. By studying this data, this dissertation uncovered the underlying relationships that exist between the…

  18. A Quantitative Study into the Information Technology Project Portfolio Practice: The Impact on Information Technology Project Deliverables

    Science.gov (United States)

    Yu, Wei

    2013-01-01

    This dissertation applied the quantitative approach to the data gathered from online survey questionnaires regarding the three objects: Information Technology (IT) Portfolio Management, IT-Business Alignment, and IT Project Deliverables. By studying this data, this dissertation uncovered the underlying relationships that exist between the…

  19. Improvement of Project Portfolio Management in an Information Technology Consulting Company

    Science.gov (United States)

    Kaewta, S.; Chutima, P.

    2014-06-01

    The scope of this research is to improve the efficiency of multiple project management in an information technology consulting company through the adaptation of the project portfolio management technique. The project management information system (PMIS) is implemented to establish effective communication channels so that internal and external teams as well as all relevant stakeholders can be employed to negotiate their work schedules. In addition, all activities created by multiple teams can be systematically reviewed and combined into a single checklist to be used as an agreed working plan for all team members. A general guideline for project portfolio management in information technology consulting companies is also proposed, which could results in a higher level of project on-time delivery.

  20. Communication in high technology product development projects:project personnel’s viewpoint for improvement

    OpenAIRE

    Väänänen, M. (Mirja)

    2010-01-01

    Abstract Product development plays a crucial role in the survival of high technology companies. High technology product development projects typically are multi-technical, multicultural, geographically dispersed, inter-connected and organized in a network of companies. These settings pose extra challenges for communication. In this qualitative multiple-case study, communication challenges and possible solutions for developing communication were studied. The empirical data were collect...

  1. Projects to improve mathematics performance at a university of technology

    Directory of Open Access Journals (Sweden)

    Ina Louw

    2009-09-01

    Full Text Available Lecturers at tertiary institutions have been expressing concern about the quality of students in mathematics for a long time now. Blame is usually placed at the door of secondary schools, but through put figures are still determining state subsidies and as such necessitate institutions to constantly revisit their efforts in terms of improving performance in mathematics. In this article, the results of two studies to improve the mathematics performance at a technical university are reported. The first study took place at the former Technikon Northern Gauteng and was an action research project with an experimental design. The study entailed the implementation of tutorial sessions and it revealed certain traits of tertiary mathematics education. Data were collected through structured observation, questionnaires and focus group interviews. A standardized questionnaire, Study Orientation Questionnaire in Maths (SOM, was introduced and “study habits” was the field in the test that featured most significantly in both the experimental and the control groups. The results revealed, inter alia, that timely assessment is needed to detect and correct misconceptions as soon as possible. It also pointed out that attendance of lectures (and tutorials impacted strongly on performance. Lastly, it was found that students preferred communicating mathematics through the medium of English and not by using their mother tongue. The second project was conducted at the Tshwane University of Technology (TUT and consisted of an investigation into assessment practices in first year mathematics. The study was executed with action research as strategy and data were collected through interviews, questionnaires and focus group interviews. Qualitative and quantitative data were collected and respondents were exposed to contemporary assessment strategies as suggested by OBE. The aim of the study was to enhance the respondents’ insight into contemporary assessment

  2. The Hyperion Project: Partnership for an Advaned Technology Cluster Testbed

    Energy Technology Data Exchange (ETDEWEB)

    Seager, M; Leininger, M

    2008-04-28

    The Hyperion project offers a unique opportunity to participate in a community-driven testing and development resource at a scale beyond what can be accomplished by one entity alone. Hyperion is a new strategic technology partnership intended to support the member-driven development and testing at scale. This partnership will allow commodity clusters to scale up to meet the growing demands of customers multi-core petascale simulation environments. Hyperion will tightly couple together the outstanding research and development capabilities of Lawrence Livermore National Laboratory with leading technology companies, including Cisco, Data Direct Networks, Dell, Intel, LSI, Mellanox, Qlogic, RedHat, SuperMicro and Sun. The end goal of this project is to revolutionize cluster computing in fundamental ways by providing the critical software and hardware components for a highly scalable simulation environment. This environment will include support for high performance networking, parallel file systems, operating system, and cluster management. This goal will be achieved by building a scalable technology cluster testbed that will be fully dedicated to the partners and provide: (1) A scalable development testing and benchmarking environment for critical enabling Linux cluster technologies; (2) An evaluation testbed for new hardware and software technologies; and (3) A vehicle for forming long term collaborations.

  3. The Andromeda Project: Final Results of Citizen Science Cluster Identification

    Science.gov (United States)

    Seth, Anil; Johnson, L. C.; Wallace, M.; Dalcanton, J.; Kapadia, A.; Lintott, C.; Simpson, R.; Skillman, E. D.; PHAT Team; Andromeda Project Team

    2014-01-01

    The Panchromatic Hubble Andromeda Treasury (PHAT) survey has completed data collection, having taken over 30 billion pixels of imaging data of the Andromeda galaxy over four years using the Hubble Space Telescope. These data contain the largest sample of star clusters observable in any galaxy, including our own Milky Way. The Andromeda Project is a citizen science project that recruited over 10,000 volunteers to identify thousands of star clusters in the PHAT imaging. We present results culminating from two rounds of cluster searching and the properties of the resulting sample. We discuss catalog completeness results derived from synthetic cluster data. This cluster sample represents a significant advance in our ability to study star and cluster formation on galaxy wide scales. We are using the resulting cluster sample to provide the best available constraints on the high-mass initial mass function and the fraction of star formation that results in bound star clusters.

  4. Scene projection technology development for imaging sensor testing at AEDC

    Science.gov (United States)

    Lowry, H.; Fedde, M.; Crider, D.; Horne, H.; Bynum, K.; Steely, S.; Labello, J.

    2012-06-01

    Arnold Engineering Development Center (AEDC) is tasked with visible-to-LWIR imaging sensor calibration and characterization, as well as hardware-in-the-loop (HWIL) testing with high-fidelity complex scene projection to validate sensor mission performance. They are thus involved in the development of technologies and methodologies that are used in space simulation chambers for such testing. These activities support a variety of program needs such as space situational awareness (SSA). This paper provides an overview of pertinent technologies being investigated and implemented at AEDC.

  5. Technology Applications Group Multimedia CD-ROM Project

    Science.gov (United States)

    McRacken, Kristi D.

    1995-01-01

    To produce a multimedia CD-ROM for the Technology Applications Group which would present the Technology Opportunity Showcase (TOPS) exhibits and Small Business Innovative Research (SBIR) projects to interested companies. The CD-ROM format is being used and developed especially for those companies who do not have Internet access, and cannot directly visit Langley through the World Wide Web. The CD-ROM will include text, pictures, sound, and movies. The information for the CD-ROM will be stored in a database from which the users can query and browse the information, and future CD's can be maintained and updated.

  6. Gas-turbine critical research and advanced technology support project

    Science.gov (United States)

    Clark, J. S.; Lowell, C. E.; Niedzwiecki, R. W.; Nainiger, J. J.

    1979-01-01

    The technical progress made during the first 15 months of a planned 40-month project to provide a critical-technology data base for utility gas-turbine systems capable of burning coal-derived fuels is summarized. Tasks were included in the following areas: (1) combustion, to study the combustion of coal-derived fuels and conversion of fuel-bound nitrogen to NOx; (2) materials, to understand and prevent hot corrosion; and (3) system studies, to integrate and guide the other technologies. Significant progress was made.

  7. WEB 2.0 TECHNOLOGIES IN ENTERPRISES AND PROJECT MANAGEMENT: ANALISYS AND A RESEARCH AGENDA

    Directory of Open Access Journals (Sweden)

    Marcirio Silveira Chaves.

    2015-06-01

    Full Text Available Web 2.0 technologies, e.g. wikis, social networks and blogs, have gained attention by companies and start being incorporated into project management in recent years. It is known that for the effective use of these technologies, project managers must overcome some barriers, such as: a. To adapt to the organizational culture and the culture of the company's employees; b. Check the knowledge of employees on the use of these tools; c. Provide adequate training before use; d. Re-evaluate the data storage structure, i.e. hardware and software; e. Improving communication between project developers. The objectives of this paper are twofold: 1. To analyze the use of IT 2.0 in business and project management and 2. To provide a research agenda on IT 2.0 use in project management. The research is characterized as exploratory and descriptive. As a result, the researchers receive an agenda to guide research on how to apply IT 2.0 in projects, while contributing to the practice allows project managers have a broad view of how such technologies are being used and how they can be used in years come. In addition, this paper seeks to disseminate the new field of Project Management 2.0.

  8. Using Project Portfolio Management in a Junior Enterprise Technology

    Directory of Open Access Journals (Sweden)

    RIBEIRO, D. M.

    2011-06-01

    Full Text Available Junior Enterprises have their own particularities in managing of their projects. Scarcity of resources and lack of experience of its members are critics and typical factors in the daily life of these companies. However, these and other variables such as the time for return on investment, project complexity and runtime of the project, must be taken into consideration in the prioritization of the outstanding portfolio projects to maximize desired outcomes. The Portfolio Management aims to provide the company a better allocation of resources in an environment with multiple projects going simultaneously. The model proposed here seeks a link between projects and organizational strategy. In this Paper also are presented the results of applying the model on Upe consultoria JR.

  9. An Empirical Analysis of Technology Transfer of National R&D Projects in South Korea

    Directory of Open Access Journals (Sweden)

    Mi-Sun Kim

    2015-01-01

    Full Text Available This study is aimed at seeking policy implications for the policy makers of South Korean government and finding a direction to support R&D institutions in performing R&D activities more efficiently, by analyzing the factors influencing technology transfer of the national R&D projects. The data retrieved from NTIS (National Science & Technology Information Service was used in analyzing the results of 575 projects with 1,903 cases of technology transfer, performed by the Ministry of Science, ICT and Future Planning, between 2002 and 2012. We found that there were significant differences between the government funded institutions and the universities and between basic R&D and applied ones. We also discovered that the government funded institutions did not necessarily take a better position than the universities in terms of the quantity of technology transfer. Lastly, the applied R&D of the universities was very vulnerable in terms of technology transfer.

  10. Implementation of Relevant Methods in Assessing Traffic-Technological Projects

    Directory of Open Access Journals (Sweden)

    Danijela Barić

    2007-09-01

    Full Text Available The assessment of investment traffic-technological projectsmeans a set of activities whose basic aim is to determine the justificationand feasibility of the projects. The decision-makingprocess, including the decision-making on investments is an extremelycomplex process, and the decision-maker has to have avision of the future and make decisions accordingly in a modemand flexible manner. Therefore, the decisions need to be theresult of a planning and research process based on relevant scientificmethods. The work includes the selected, analysed andpresented methods of cost-benefit analysis, methods of multi-criteria decision-making and SWOT (Strengths, Weaknesses,Opportunities, and Threats analysis methods. Regarding thebasic characteristics, the mentioned methods have been compared,the order of their implementation has been determined,and then they have been implemented in assessing the traffic-technological projects of reconstmction with the aim of selectingthe optimal variant solution.

  11. Technology and commercial supply of components for the LHC project

    CERN Document Server

    Faugeras, Paul E

    1998-01-01

    After a brief reminder of the motives and the outline of the Large Hadron Collider (LHC) project, one will review the technology and the hardware to be built up. The LHC calls for High Tech innovation s in superconductivity, cryogenics with superfluid helium, ultra high vacuum, surface treatments, etc. which have to be transferred to Industry and produced on a large scale. It will also make extensi ve use of more conventional technology, but because of the intrinsic complexity of the machine and of the international nature of its funding and procurement sources, it will require sophisticated man agement and logistics tools to minimize costs and installation time. The planning for the whole project will be given with an indication of the nature and time schedule of the major contracts.

  12. Avionics Technology Contract Project Report Phase I with Research Findings.

    Science.gov (United States)

    Sappe', Hoyt; Squires, Shiela S.

    This document reports on Phase I of a project that examined the occupation of avionics technician, established appropriate committees, and conducted task verification. Results of this phase provide the basic information required to develop the program standards and to guide and set up the committee structure to guide the project. Section 1…

  13. Evaluation of Project Based Learning in the Area of Manufacturing and Statistics in the Degree of Industrial Technology

    Science.gov (United States)

    Buj-Corral, Irene; Marco-Almagro, Lluís; Riba, Alex; Vivancos-Calvet, Joan; Tort-Martorell, Xavier

    2015-01-01

    In the subject Project I in the second year of the Degree in Industrial Technology Engineering taught at the School of Industrial Engineering of Barcelona (ETSEIB), subgroups of 3-4 students within groups of 20 students develop a project along a semester. Results of 2 projects are presented related to manufacturing, measurement of parts and the…

  14. A Tailored Systems Engineering Framework for Science and Technology Projects

    Science.gov (United States)

    2009-03-01

    developments, and maybe even humanity’s grand challenges [ NAE , 2008]) and allows scientists, technologists, engineers, and project managers the opportunity...application (in which case the process is usually executed at the TD level), or cross- and multi-discipline technology solutions (executed at the enterprise...E. Director, United States Air Force Center for Systems Engineering, Wright-Patterson AFB OH. Personal Interview. 21 July 2008. [ NAE , 2008

  15. NASA Fixed Wing Project: Green Technologies for Future Aircraft Generation

    Science.gov (United States)

    Del Rosario, Ruben; Koudelka, John M.; Wahls, Rich; Madavan, Nateri

    2014-01-01

    Commercial aviation relies almost entirely on subsonic fixed wing aircraft to constantly move people and goods from one place to another across the globe. While air travel is an effective means of transportation providing an unmatched combination of speed and range, future subsonic aircraft must improve substantially to meet efficiency and environmental targets.The NASA Fundamental Aeronautics Fixed Wing (FW) Project addresses the comprehensive challenge of enabling revolutionary energy efficiency improvements in subsonic transport aircraft combined with dramatic reductions in harmful emissions and perceived noise to facilitate sustained growth of the air transportation system. Advanced technologies and the development of unconventional aircraft systems offer the potential to achieve these improvements. Multidisciplinary advances are required in aerodynamic efficiency to reduce drag, structural efficiency to reduce aircraft empty weight, and propulsive and thermal efficiency to reduce thrust-specific energy consumption (TSEC) for overall system benefit. Additionally, advances are required to reduce perceived noise without adversely affecting drag, weight, or TSEC, and to reduce harmful emissions without adversely affecting energy efficiency or noise.The paper will highlight the Fixed Wing project vision of revolutionary systems and technologies needed to achieve these challenging goals. Specifically, the primary focus of the FW Project is on the N+3 generation; that is, vehicles that are three generations beyond the current state of the art, requiring mature technology solutions in the 2025-30 timeframe

  16. Overview and main results of the DidaTab project

    CERN Document Server

    Blondel, Francois-Marie; Tort, Francoise

    2008-01-01

    The DidaTab project (Didactics of Spreadsheet, teaching and learning spreadsheets) is a three year project (2005-2007) funded by the French Ministry of Research and dedicated to the study of personal and classroom uses of spreadsheets in the French context, focussing on the processes of appropriation and uses by secondary school students. In this paper, we present an overview of the project, briefly report the studies performed in the framework of the DidaTab project, and give the main results we obtained. We then explore the new research tracks we intend to develop, more in connection with EuSpRIG. Our main result is that the use of spreadsheet during secondary education (grade 6 to 12) is rather sparse for school work (and even more seldom at home) and that student competencies are weak. Curricula have to be reviewed to include more training of dynamics tabular tools (including databases queries) in order to ensure sufficient mastery of computer tools that have became necessary in many educational activitie...

  17. Bringing technology to students’ proximity: a sociocultural account of technology-based learning projects

    OpenAIRE

    Evode Mukama

    2014-01-01

    This paper depicts a study carried out in Rwanda concerning university students who participated in a contest to produce short documentary films. The purpose of this research is to conceptualize these kinds of technology-based learning projects (TBLPs) through a sociocultural perspective. The methodology included focus-group discussions and field notes to collect empirical data. The findings reveal that the more educational technologies capture objects of learning positioned in the students’ ...

  18. Results of the probabilistic volcanic hazard analysis project

    Energy Technology Data Exchange (ETDEWEB)

    Youngs, R.; Coppersmith, K.J.; Perman, R.C. [Geomatrix Consultants, Inc., San Francisco, CA (United States)

    1996-12-01

    The Probabilistic Volcanic Hazard Analysis (PVHA) project, sponsored by the U.S. Department of Energy (DOE), has been conducted to assess the probability of a future volcanic event disrupting the potential repository at Yucca Mountain. The methodology for the PVHA project is summarized in Coppersmith and others (this volume). The judgments of ten earth scientists who were members of an expert panel were elicited to ensure that a wide range of approaches were considered. Each expert identified one or more approaches for assessing the hazard and they quantified their uncertainties in models and parameter values. Aggregated results are expressed as a probability distribution on the annual frequency of intersecting the proposed repository block. This paper presents some of the key results of the PVHA assessments. These results are preliminary; the final report for the study is planned to be submitted to DOE in April 1996.

  19. Waste-to-energy technologies and project implementation

    CERN Document Server

    Rogoff, Marc J

    2011-01-01

    This book covers in detail programs and technologies for converting traditionally landfilled solid wastes into energy through waste-to-energy projects. Modern Waste-to-Energy plants are being built around the world to reduce the levels of solid waste going into landfill sites and contribute to renewable energy and carbon reduction targets. The latest technologies have also reduced the pollution levels seen from early waste incineration plants by over 99 per cent. With case studies from around the world, Rogoff and Screve provide an insight into the different approaches taken to the planning and implementation of WTE. The second edition includes coverage of the latest technologies and practical engineering challenges as well as an exploration of the economic and regulatory context for the development of WTE.

  20. Manual on SFR R and D and Technology Monitoring System Based on Enterprise Project Management Solution

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dong Uk; Lee, Yong Bum; Won, Byung Chool; Kim, Young In; Hahn, Do Hee

    2008-04-15

    This report is a manual on enterprise project management solution for R and D and technology monitoring system that is applicable for managing the generation IV sodium-cooled fast reactor development. The prime goal of this system is to provide project manager with reliable and accurate information of status of progress, performance and resource allocation, and attain traceability and visibility of project implementation for effective project management. This report is composed of the three part. The first part is an introduction on microsoft project professional software that was used to monitor the progress, evaluate the results and analyze the resource distribution of the activities. The second makes a description of project plan and control, and the third part describes on collaboration and teamwork.

  1. Are New Technologies Influencing the Academic Results Achieved by Students? An Exploratory Study

    Science.gov (United States)

    Gargallo-Castel, Ana; Esteban-Salvador, Luisa; Marzo-Navarro, Mercedes

    2010-01-01

    The purpose of this study is to analyze the application of Information Communication Technologies (ICTs) within tertiary education in a Spanish University. We analyze the results of a new initiative developed by the University of Zaragoza through an innovative project for a virtual campus called "Anillo Digital Docente." Data relating to…

  2. FY 1998 industrial technology R and D project. Report on the results of the development of utilization technology of biological resource such bioconsortia system (Development of production technology of biological use petroleum substituting fuels); 1998 nendo sangyo gijutsu kenkyu kaihatsu jigyo. Fukugo seibutsukeinado seibutsu shigen riyo gijutsu kaihatsu (seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Technology development was conducted for production of useful substances using the bioconsortia system. In FY 1998, the development of element technology was studied. As to the utilization technology of gut symbiotic microorganisms such as termite and longhorn beetle, clone types of gut microorganism complex system were analyzed to find out the diversification. In the decay of wood, co-culture of two species of mold fungus was increased in efficiency than single culture. More than 90% was classified/identified of the mold fungi accumulated (in wood piece)/separated for the utilization of plant symbiotic microorganisms. For the production of petroleum substituting useful resource, conditions were established of callus induction from immature embryos of tropical oil crops, especially oil palm, and of regeneration of a lot of small plants from the callus. To establish the Agrobacterium-mediated transformation system of oil palm, the binary vector harboring the reporter gene and selectable marker gene was constructed. Using the vector, oil palm tissues are inoculated and infected with agrobacteria. To heighten the function of palm oil, 10 particular clones were selected from the complementary DNA library obtained from oil palm fruit tissues. The genetic study of germs was also made. (NEDO)

  3. 76 FR 12507 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2011-03-07

    ... Secretary Science and Technology Reinvention Laboratory Personnel Management Demonstration Project... monitor the fair, equitable, and consistent implementation of the provisions of the demonstration project... March 7, 2011 Part III Department of Defense Science and Technology Reinvention Laboratory...

  4. Projects at the Western Environmental Technology Office. Quarterly technical progress report, April 1--June 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    This report contains brief outlines of the multiple projects under the responsibility of the Western Environmental Technology Office in Butte Montana. These projects include biomass remediation, remediation of contaminated soils, mine waste technology, and several other types of remediation.

  5. Local participation in complex technological projects as bridging between different communities in Belgium

    NARCIS (Netherlands)

    Sips, K.; Craps, M.; Dewulf, A.

    2013-01-01

    Local community participation in complex technological projects, where technological innovations and risks need to be managed, is notoriously challenging. Relations with local inhabitants easily take the form of exclusion, protest, controversy or litigation. While such projects represent

  6. A framework for identifying the applicability of heating or cooling technologies based on initial project information

    Science.gov (United States)

    Cacace, Katie Meng

    In order to fully achieve the energy savings and human comfort benefits of many alternative heating and cooling technologies, design considerations for these technologies must be made during the conceptual design stage. However, at this stage architects are often faced with challenges that inhibit the integration of such technologies. At the early stages of design, architects have limited time and technical knowledge to research alternative technologies and mechanical engineers are typically not yet part of the design team to offer their expertise. To address these problems, this research developed a framework for a Technology Identifier that would inform an architect about alternative heating and cooling technologies that are applicable to their specific project at the conceptual design stage. The framework is based on the premise that a quantitative relationship between the initial project information and a technology's critical output variable(s) for heat transfer to the space can be established. Therefore, to be included in the framework a technology must possess a component that provides direct heat transfer to the space for the framework to determine if the technology can maintain the desired space temperature. The climatic influences on a technology's performance and the effect of changing a technology's input variables on the heat transfer output variable(s) were also quantified. Existing building energy simulation programs were used in these analyses. The framework develops simulation input files for multiple technologies, utilizes existing simulation programs to predict the performance of these technologies, and then displays the output results along with other information that is useful to designers at the conceptual stage. Each simulation input file is compiled from a template that queries databases and requires minimal user input. The output display includes the space temperature, energy consumption, and design considerations of each technology. A

  7. Bringing Technology to Students' Proximity: A Sociocultural Account of Technology-Based Learning Projects

    Science.gov (United States)

    Mukama, Evode

    2014-01-01

    This paper depicts a study carried out in Rwanda concerning university students who participated in a contest to produce short documentary films. The purpose of this research is to conceptualize these kinds of technology-based learning projects (TBLPs) through a sociocultural perspective. The methodology included focus group discussions and field…

  8. Using technology-enhanced, cooperative, group-project learning for student comprehension and academic performance

    Science.gov (United States)

    Tlhoaele, Malefyane; Suhre, Cor; Hofman, Adriaan

    2016-05-01

    Cooperative learning may improve students' motivation, understanding of course concepts, and academic performance. This study therefore enhanced a cooperative, group-project learning technique with technology resources to determine whether doing so improved students' deep learning and performance. A sample of 118 engineering students, randomly divided into two groups, participated in this study and provided data through questionnaires issued before and after the experiment. The results, obtained through analyses of variance and structural equation modelling, reveal that technology-enhanced, cooperative, group-project learning improves students' comprehension and academic performance.

  9. WEB 2.0 SERVICES AS A TECHNOLOGICAL FOUNDATION OF A NETWORK PROJECT

    Directory of Open Access Journals (Sweden)

    Tatiana Ivanovna Kanyanina

    2015-02-01

    Full Text Available In the light of the requirements of the federal state educational standard increases the value of the network design based on the use of Web 2.0 services. The article outlines the range of technological challenges faced by the developer of the network project, such as the choice of the network platform of the project, design tools and tools for project results placement, project coordination and organization of communication lines, the choice of instruments for the promotion of the project on the Internet. The main attention is focused on the examples of network services that address these challenges, and describe their features. The authors rely on the specific network projects implemented in Nizhny Novgorod region. The paper analyzes the possible project’s network sites (network environment. The article gives a general description of each environment, marks its distinctive features, advantages and disadvantages. The article presents project tasks’ examples, designed on the basis of the variety of Web 2.0 services that functionally meet the requirements of a particular task, examples of services to represent the project products and to summarize its results. Attention is paid to the organization of the lines of communication of the project participants and organizers and to the role of network services in the project promotion on the Internet.

  10. Linked open data creating knowledge out of interlinked data : results of the LOD2 project

    CERN Document Server

    Bryl, Volha; Tramp, Sebastian

    2014-01-01

    Linked Open Data (LOD) is a pragmatic approach for realizing the Semantic Web vision of making the Web a global, distributed, semantics-based information system. This book presents an overview on the results of the research project “LOD2 -- Creating Knowledge out of Interlinked Data”. LOD2 is a large-scale integrating project co-funded by the European Commission within the FP7 Information and Communication Technologies Work Program. Commencing in September 2010, this 4-year project comprised leading Linked Open Data research groups, companies, and service providers from across 11 European countries and South Korea. The aim of this project was to advance the state-of-the-art in research and development in four key areas relevant for Linked Data, namely 1. RDF data management; 2. the extraction, creation, and enrichment of structured RDF data; 3. the interlinking and fusion of Linked Data from different sources and 4. the authoring, exploration and visualization of Linked Data.

  11. The 2011 nuclear medicine technology job analysis project of the American Registry of Radiologic Technologists.

    Science.gov (United States)

    Anderson, Dan; Hubble, William; Press, Bret A; Hall, Scott K; Michels, Ann D; Koenen, Roxanne; Vespie, Alan W

    2010-12-01

    The American Registry of Radiologic Technologists (ARRT) conducts periodic job analysis projects to update the content and eligibility requirements for all certification examinations. In 2009, the ARRT conducted a comprehensive job analysis project to update the content specifications and clinical competency requirements for the nuclear medicine technology examination. ARRT staff and a committee of volunteer nuclear medicine technologists designed a job analysis survey that was sent to a random sample of 1,000 entry-level staff nuclear medicine technologists. Through analysis of the survey data and judgments of the committee, the project resulted in changes to the nuclear medicine technology examination task list, content specifications, and clinical competency requirements. The primary changes inspired by the project were the introduction of CT content to the examination and the expansion of the content covering cardiac procedures.

  12. ATES Smart Grids research project overview and first results

    Science.gov (United States)

    Bloemendal, Martin; Jaxa-Rozen, Marc; Rostampour, Vahab

    2016-04-01

    Background: ATES is application is growing Application of seasonal Aquifer Thermal Energy Storage (ATES) contributes to energy saving and Greenhouse Gas (GHG)-reduction goals (CBS, 2015; EU, 2010, 2014). Recently it was shown that ATES is applicable in several parts of the world (Bloemendal et al., 2015). While in most parts of the world adoption is just beginning, in the Netherlands progressive building energy efficiency regulation already caused the adoption of ATES to take off (Heekeren and Bakema, 2015; Sommer et al., 2015). As a result of the large number of ATES systems in the Netherlands, the subsurface plays a crucial role in the energy saving objectives of The Netherlands (Kamp, 2015; SER, 2013). Problem: suboptimal use of the subsurface for energy storage ATES systems accumulate in urban areas, as can be expected with a large growth of ATES systems; at many locations in Dutch cities demand for ATES transcends the available space in the subsurface (Li, 2014; Sommer et al., 2015). Within in the Dutch legal framework and state of technology optimal use of the subsurface is not secured; i.e. minimizing the total GHG emissions in a certain area. (Bloemendal et al., 2014; Li, 2014). The most important aspects in this problem are A) the permanent and often unused claim resulting from static permits and B) excessive safety zones around wells to prevent interaction. Both aspects result in an artificial reduction of subsurface space for potential new ATES systems. Recent research has shown that ground energy storage systems could be placed much closer to each other (Bakr et al., 2013; Sommer et al., 2015), and a controlled/limited degree of interaction between them can actually benefit the overall energy savings of an entire area. Solution: the approach and first results of our research project on ATES Smart Grids The heating and cooling demand of buildings is a dynamic and hard to predict process, due to effects such as weather, climate change, changing function

  13. CO2 CAPTURE PROJECT - AN INTEGRATED, COLLABORATIVE TECHNOLOGY DEVELOPMENT PROJECT FOR NEXT GENERATION CO2 SEPARATION, CAPTURE AND GEOLOGIC SEQUESTRATION

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Helen Kerr

    2003-08-01

    The CO{sub 2} Capture Project (CCP) is a joint industry project, funded by eight energy companies (BP, ChevronTexaco, EnCana, Eni, Norsk Hydro, Shell, Statoil, and Suncor) and three government agencies (1) European Union (DG Res & DG Tren), (2) Norway (Klimatek) and (3) the U.S.A. (Department of Energy). The project objective is to develop new technologies, which could reduce the cost of CO{sub 2} capture and geologic storage by 50% for retrofit to existing plants and 75% for new-build plants. Technologies are to be developed to ''proof of concept'' stage by the end of 2003. The project budget is approximately $24 million over 3 years and the work program is divided into eight major activity areas: (1) Baseline Design and Cost Estimation--defined the uncontrolled emissions from each facility and estimate the cost of abatement in $/tonne CO{sub 2}. (2) Capture Technology, Post Combustion: technologies, which can remove CO{sub 2} from exhaust gases after combustion. (3) Capture Technology, Oxyfuel: where oxygen is separated from the air and then burned with hydrocarbons to produce an exhaust with high CO{sub 2} for storage. (4) Capture Technology, Pre -Combustion: in which, natural gas and petroleum coke are converted to hydrogen and CO{sub 2} in a reformer/gasifier. (5) Common Economic Model/Technology Screening: analysis and evaluation of each technology applied to the scenarios to provide meaningful and consistent comparison. (6) New Technology Cost Estimation: on a consistent basis with the baseline above, to demonstrate cost reductions. (7) Geologic Storage, Monitoring and Verification (SMV): providing assurance that CO{sub 2} can be safely stored in geologic formations over the long term. (8) Non-Technical: project management, communication of results and a review of current policies and incentives governing CO{sub 2} capture and storage. Technology development work dominated the past six months of the project. Numerous studies are making

  14. Bringing Technology to Students’ Proximity: A Sociocultural Account of Technology-Based Learning Projects

    Directory of Open Access Journals (Sweden)

    Evode Mukama

    2014-12-01

    Full Text Available This paper depicts a study carried out in Rwanda concerning university students who participated in a contest to produce short documentary films. The purpose of this research is to conceptualize these kinds of technology-based learning projects (TBLPs through a sociocultural perspective. The methodology included focus-group discussions and field notes to collect empirical data. The findings reveal that the more educational technologies capture objects of learning positioned in the students’ sociocultural proximity, the more focused the learners’ attention is on these objects. The study shows also that a change in learning projects may depend to a large extent on whether the technology relates to the students’ sociocultural proximity, that is, taking into consideration students’ physical, cultural, and contextual real world. The study recommends a community of learning/inquiry embedded in a collaborative, problem-solving dynamic involving cognitive support from peers, teachers, external specialists, and the wider community.

  15. New business opportunity: Green field project with new technology

    Directory of Open Access Journals (Sweden)

    Lee Seung Jae

    2014-06-01

    Full Text Available Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation

  16. New business opportunity: Green field project with new technology

    Science.gov (United States)

    Lee, Seung Jae; Woo, Jong Hun; Shin, Jong Gye

    2014-06-01

    Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation technology.

  17. Technical cooperation front line. JICA technology cooperation project in Indonesia and Vietnam (Coal mining technology enhancement project in Indonesia); (Coal Mine Firedamp Gas Management Center in Vietnam)

    Energy Technology Data Exchange (ETDEWEB)

    Inami, K. [Japan Coal Energy Center (Japan). Technical Service Group, Engineering Dept.

    2002-09-01

    In April 2001, two coal mining technical cooperation projects of Japan International Cooperation Agency (JICA) started. The first project is 'Coal Mining Technology Enhancement Project in Indonesia'. The second project is 'Coal Mine Firedamp Gas Management Center in Vietnam'. Both are project-type technical cooperation for the technology transfer centering in advanced Japanese underground coal mine technologies for a five years project period from April 1 2001 to 31 March 2006. Japan Coal Energy Center (JCOAL) have carried out indirect supporting function for the planning and the execution of the project from the preparation phase of the project start-up as a supporting agency based on the business agreement with JICA. This paper reports the projects development. 2 figs., 1 tab.

  18. Laboratory technology research - abstracts of FY 1997 projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of this country: the world-class basic research capability of the DOE Energy Research (ER) multi-program national laboratories and the unparalleled entrepreneurial spirit of American industry. A distinguishing feature of the ER multi-program national laboratories is their ability to integrate broad areas of science and engineering in support of national research and development goals. The LTR program leverages this strength for the Nation`s benefit by fostering partnerships with US industry. The partners jointly bring technology research to a point where industry or the Department`s technology development programs can pursue final development and commercialization. Projects supported by the LTR program are conducted by the five ER multi-program laboratories. These projects explore the applications of basic research advances relevant to DOE`s mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials; intelligent processing/manufacturing research; and sustainable environments.

  19. Applications of EOR (enhanced oil recovery) technology in field projects--1990 update

    Energy Technology Data Exchange (ETDEWEB)

    Pautz, J.F.; Thomas, R.D.

    1991-01-01

    Trends in the type and number of US enhanced oil recovery (EOR) projects are analyzed for the period from 1980 through 1989. The analysis is based on current literature and news media and the Department of Energy (DOE) EOR Project Data Base, which contains information on over 1,348 projects. The characteristics of the EOR projects are grouped by starting date and process type to identify trends in reservoir statistics and applications of process technologies. Twenty-two EOR projects starts were identified for 1989 and ten project starts for 1988. An obvious trend over recent years has been the decline in the number of project starts since 1981 until 1988 which corresponds to the oil price decline during that period. There was a modest recovery in 1989 of project starts, which lags the modest recovery of oil prices in 1987 that was reconfirmed in 1989. During the time frame of 1980 to 1989, there has been a gradual improvement in costs of operation for EOR technology. The perceived average cost of EOR has gone down from a $30/bbl range to low $20/bbl. These costs of operation seems to stay just at the price of oil or slightly above to result in marginal profitability. The use of polymer flooding has drastically decreased both in actual and relative numbers of project starts since the oil price drop in 1986. Production from polymer flooding is down more than 50%. Long-term plans for large, high-cost projects such as CO{sub 2} flooding in West Texas, steamflooding in California, and hydrocarbon flooding on the North Slope have continued to be implemented. EOR process technologies have been refined to be more cost effective as shown by the continued application and rising production attributable to EOR. 8 refs., 6 figs., 13 tabs.

  20. Researchers' experience with project management in health and medical research: Results from a post-project review

    Directory of Open Access Journals (Sweden)

    Elliott Elizabeth J

    2011-06-01

    Full Text Available Abstract Background Project management is widely used to deliver projects on time, within budget and of defined quality. However, there is little published information describing its use in managing health and medical research projects. We used project management in the Alcohol and Pregnancy Project (2006-2008 http://www.ichr.uwa.edu.au/alcoholandpregnancy and in this paper report researchers' opinions on project management and whether it made a difference to the project. Methods A national interdisciplinary group of 20 researchers, one of whom was the project manager, formed the Steering Committee for the project. We used project management to ensure project outputs and outcomes were achieved and all aspects of the project were planned, implemented, monitored and controlled. Sixteen of the researchers were asked to complete a self administered questionnaire for a post-project review. Results The project was delivered according to the project protocol within the allocated budget and time frame. Fifteen researchers (93.8% completed a questionnaire. They reported that project management increased the effectiveness of the project, communication, teamwork, and application of the interdisciplinary group of researchers' expertise. They would recommend this type of project management for future projects. Conclusions Our post-project review showed that researchers comprehensively endorsed project management in the Alcohol and Pregnancy Project and agreed that project management had contributed substantially to the research. In future, we will project manage new projects and conduct post-project reviews. The results will be used to encourage continuous learning and continuous improvement of project management, and provide greater transparency and accountability of health and medical research. The use of project management can benefit both management and scientific outcomes of health and medical research projects.

  1. Researchers' experience with project management in health and medical research: Results from a post-project review

    Science.gov (United States)

    2011-01-01

    Background Project management is widely used to deliver projects on time, within budget and of defined quality. However, there is little published information describing its use in managing health and medical research projects. We used project management in the Alcohol and Pregnancy Project (2006-2008) http://www.ichr.uwa.edu.au/alcoholandpregnancy and in this paper report researchers' opinions on project management and whether it made a difference to the project. Methods A national interdisciplinary group of 20 researchers, one of whom was the project manager, formed the Steering Committee for the project. We used project management to ensure project outputs and outcomes were achieved and all aspects of the project were planned, implemented, monitored and controlled. Sixteen of the researchers were asked to complete a self administered questionnaire for a post-project review. Results The project was delivered according to the project protocol within the allocated budget and time frame. Fifteen researchers (93.8%) completed a questionnaire. They reported that project management increased the effectiveness of the project, communication, teamwork, and application of the interdisciplinary group of researchers' expertise. They would recommend this type of project management for future projects. Conclusions Our post-project review showed that researchers comprehensively endorsed project management in the Alcohol and Pregnancy Project and agreed that project management had contributed substantially to the research. In future, we will project manage new projects and conduct post-project reviews. The results will be used to encourage continuous learning and continuous improvement of project management, and provide greater transparency and accountability of health and medical research. The use of project management can benefit both management and scientific outcomes of health and medical research projects. PMID:21635721

  2. ESA's Cloudscape: A Review of Projects Using Cloud Technology in ESA

    Science.gov (United States)

    O'Mullane, W.; Balseiro, J. F.

    2012-09-01

    Several projects in the space agency have flirted with cloud solutions, all with fairly positive results. In this talk a quick overview of the projects will be given. They span a large number of perhaps surprising areas. Much of ESA's videoconferencing is now done using cloud resources. Perhaps more than one might expect, several projects from earth observation to astronomy use cloud tech for data processing. Some more detail will be given from the Gaia perspective, as this is the authors' area of expertise. Within Gaia we have experimented with Amazon for data processing and are investigating how catalogue access might be facilitated with this technology.

  3. Office of Industrial Technologies: Summary of program results

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-01-01

    Working in partnership with industry, the US Department of Energy`s (DOE`s) Office of Industrial Technologies (OIT) is helping reduce industrial energy use, emissions, and waste while boosting productivity. Operating within the Office of Energy Efficiency and Renewable Energy (EE), OIT conducts research, development, demonstration, and technology transfer efforts that are producing substantial, measurable benefits to industry. This document summarizes some of the impacts of OIT`s programs through 1997. OIT tracks energy savings as well as other benefits associated with the successfully commercialized technologies resulting from OIT-supported research partnerships. Specifically, a chart shows current and cumulative energy savings as well as cumulative reductions of various air pollutants including particulates, volatile organic compounds (VOCs), nitrogen oxides (NO{sub x}), sulfur oxides (SO{sub x}), and the greenhouse gas, carbon dioxide (CO{sub 2}). The bulk of the document consists of four appendices. Appendix 1 describes the technologies currently available commercially, along with their applications and benefits; Appendix 2 describes the OIT-supported emerging technologies that are likely to be commercialized within the next year or two; Appendix 3 describes OIT-sponsored technologies used in commercial applications in the past that are no longer tracked; and Appendix 4 describes the methodology used to assess and track OIT-supported technologies.

  4. Evaluating the Incorporation of Technology and Application Projects in the Higher Education Mathematics Classroom

    Science.gov (United States)

    Schreyer-Bennethum, Lynn; Albright, Leonard

    2011-01-01

    We report the qualitative and quantitative results of incorporating interdisciplinary application projects and increasing the use of teaching with technology into Calculus I, II and III at the University of Colorado Denver. Minimal changes were made to the curriculum and minimal time was required of instructors to make the changes. Instructors…

  5. Evaluating the Incorporation of Technology and Application Projects in the Higher Education Mathematics Classroom

    Science.gov (United States)

    Schreyer-Bennethum, Lynn; Albright, Leonard

    2011-01-01

    We report the qualitative and quantitative results of incorporating interdisciplinary application projects and increasing the use of teaching with technology into Calculus I, II and III at the University of Colorado Denver. Minimal changes were made to the curriculum and minimal time was required of instructors to make the changes. Instructors…

  6. Technology Base Research Project for electrochemical energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Kinoshita, Kim (ed.)

    1991-06-01

    The US DOE's Office of Propulsion Systems provides support for an electrochemical energy storage program, which includes R D on advanced rechargeable batteries and fuel cells. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles (EVs). The program centers on advanced systems that offer the potential for high performance and low life-cycle costs, both of which are necessary to permit significant penetration into commercial markets. The general R D areas addressed by the project include identification of new electrochemical couples for advanced batteries, determination of technical feasibility of the new couples, improvements in battery components and materials, establishment of engineering principles applicable to electrochemical energy storage and conversion, and the development of air-system (fuel cell, metal/air) technology for transportation applications. Major emphasis is given to applied research which will lead to superior performance and lower life-cycle costs. The TBR Project is divided into three major project elements: Exploratory Research, Applied Science Research, and Air Systems Research. Highlights of each project element are summarized according to the appropriate battery system or electrochemical research area. 16 figs., 4 tabs.

  7. Laboratory technology research: Abstracts of FY 1998 projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of the country: the world-class basic research capability of the DOE Office of Science (SC) national laboratories and the unparalleled entrepreneurial spirit of American industry. Projects supported by the LTR program in FY 1998 explore the applications of basic research advances relevant to DOE`s mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials, intelligent processing and manufacturing research, and environmental and biomedical research. Abstracts for 85 projects are contained in this report.

  8. An evaluation approach for research project pilot technological applications

    Science.gov (United States)

    Marcelino-Jesus, Elsa; Sarraipa, Joao; Jardim-Goncalves, Ricardo

    2013-10-01

    In a world increasingly more competitive and in a constantly development and growth it's important that companies have economic tools, like frameworks to help them to evaluate and validate the technology development to better fits in each company particular needs. The paper presents an evaluation approach for research project pilot applications to stimulate its implementation and deployment, increasing its adequacy and acceptance to their stakeholders and consequently providing new business profit and opportunities. Authors used the DECIDE evaluation framework as a major guide to this approach, which was tested in the iSURF project to support the implementation of an interoperability service utility for collaborative supply chain planning across multiple domains supported by RFID devices.

  9. Laboratory Technology Research: Abstracts of FY 1996 projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of this country: the world-class basic research capability of the DOE Energy Research (ER) multi-program national laboratories and the unparalleled entrepreneurial spirit of American industry. Projects supported by the LTR program are conducted by the five ER multi-program laboratories: Argonne, Brookhaven, Lawrence Berkeley, Oak Ridge, and Pacific Northwest National Laboratories. These projects explore the applications of basic research advances relevant to Department of Energy`s (DOE) mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials, intelligent processing/manufacturing research, and sustainable environments.

  10. Modeling air quality over China: Results from the Panda project

    Science.gov (United States)

    Katinka Petersen, Anna; Bouarar, Idir; Brasseur, Guy; Granier, Claire; Xie, Ying; Wang, Lili; Wang, Xuemei

    2015-04-01

    China faces strong air pollution problems related to rapid economic development in the past decade and increasing demand for energy. Air quality monitoring stations often report high levels of particle matter and ozone all over the country. Knowing its long-term health impacts, air pollution became then a pressing problem not only in China but also in other Asian countries. The PANDA project is a result of cooperation between scientists from Europe and China who joined their efforts for a better understanding of the processes controlling air pollution in China, improve methods for monitoring air quality and elaborate indicators in support of European and Chinese policies. A modeling system of air pollution is being setup within the PANDA project and include advanced global (MACC, EMEP) and regional (WRF-Chem, EMEP) meteorological and chemical models to analyze and monitor air quality in China. The poster describes the accomplishments obtained within the first year of the project. Model simulations for January and July 2010 are evaluated with satellite measurements (SCIAMACHY NO2 and MOPITT CO) and in-situ data (O3, CO, NOx, PM10 and PM2.5) observed at several surface stations in China. Using the WRF-Chem model, we investigate the sensitivity of the model performance to emissions (MACCity, HTAPv2), horizontal resolution (60km, 20km) and choice of initial and boundary conditions.

  11. Project-Driven Learning-by-Doing Method for Teaching Software Engineering using Virtualization Technology

    Directory of Open Access Journals (Sweden)

    Kun Ma

    2014-10-01

    Full Text Available Many universities are now offering software engineering an undergraduate level emphasizing knowledge point. However, some enterprise managers reflected that education ignore hands-on ability training, and claimed that there is the isolation between teaching and practice. This paper presents the design of a Software Engineering course (sixth semester in network engineering at University of Jinan for undergraduate Software Engineering students that uses virtualization technology to teach them project-driven learning-by-doing software development process. We present our motivation, challenges encountered, pedagogical goals and approaches, findings (both positive experiences and negative lessons. Our motivation was to teach project-driven Software Engineering using virtualization technology. The course also aims to develop entrepreneurial skills needed for software engineering graduates to better prepare them for the software industry. Billing models of virtualization help pupils and instructors find the cost of the experiment. In pay-as-you-go manner, two labs and three step-by-step projects (single project, pair project, and team project are designed to help the students to complete the assignment excitedly. We conduct some detailed surveys and present the results of student responses. The assessment process designed for this course is illustrated. The paper also shows that learning-by-doing method correlates with the characteristics of different projects, which has resulted in a successful experience as reported by students in an end of a semester survey.

  12. Exploring the Relationship between Authentic Leadership and Project Outcomes and Job Satisfaction with Information Technology Professionals

    Science.gov (United States)

    Fischer, Mark A.

    2014-01-01

    One of the most important issues for organizations and information technology (IT) professionals is measuring the success or failure of information technology projects. How we understand the value and usefulness of IT projects is critical to how information technology executives evaluate and decide on technology investments. In a 2009 CHAOS…

  13. Exploring the Relationship between Authentic Leadership and Project Outcomes and Job Satisfaction with Information Technology Professionals

    Science.gov (United States)

    Fischer, Mark A.

    2014-01-01

    One of the most important issues for organizations and information technology (IT) professionals is measuring the success or failure of information technology projects. How we understand the value and usefulness of IT projects is critical to how information technology executives evaluate and decide on technology investments. In a 2009 CHAOS…

  14. Ceramic Technology Project database: September 1990 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1992-06-01

    Data generated within the Ceramic Technology Project (CTP) represent a valuable resource for both research and industry. The CTP database was created to provide easy access to this information in electronic and hardcopy forms by using a computerized database and by issuing periodic hardcopy reports on the database contents. This report is the sixth in a series of semiannual database summaries and covers recent additions to the database, including joined brazed specimen test data. It covers 1 SiC, 34 SiN, 10 whisker-reinforced SiN, 2 zirconia-toughened aluminas, 8 zirconias, and 34 joints.

  15. 1990 DOE/SANDIA crystalline photovoltaic technology project review meeting

    Energy Technology Data Exchange (ETDEWEB)

    Ruby, D.S. (ed.)

    1990-07-01

    This document serves as the proceedings for the annual project review meeting held by Sandia's Photovoltaic Cell Research Division and Photovoltaic Technology Division. It contains information supplied by each organization making a presentation at the meeting, which was held August 7 through 9, 1990 at the Sheraton Hotel in Albuquerque, New Mexico. Sessions were held to discuss national photovoltaic programs, one-sun crystalline silicon cell research, concentrator silicon cell research, concentrator 3-5 cell research, and concentrating collector development.

  16. 1992 DOE/Sandia crystalline photovoltaic technology project review meeting

    Energy Technology Data Exchange (ETDEWEB)

    Maish, A. [ed.

    1992-07-01

    This document serves as the proceedings for the annual project review meeting held by Sandia National Laboratories` Photovoltaic Technology and Photovoltaic Evaluation Departments. It contains information supplied by organizations making presentations at the meeting, which was held July 14--15, 1992 at the Sheraton Old Town Hotel in Albuquerque, New Mexico. Overview sessions covered the Department of Energy (DOE) program, including those at Sandia and the National Renewable Energy Laboratory (NREL), and non-DOE programs, including the EPRI concentrator collector program, The Japanese crystalline silicon program, and some concentrating photovoltaic activities in Europe. Additional sessions included papers on Sandia`s Photovoltaic Device Fabrication Laboratory`s collaborative research, cell processing research, the activities of the participants in the Concentrator Initiative Program, and photovoltaic technology evaluation at Sandia and NREL.

  17. The Advanced Linked Extended Reconnaissance & Targeting Technology Demonstration project

    Science.gov (United States)

    Edwards, Mark

    2008-04-01

    The Advanced Linked Extended Reconnaissance & Targeting (ALERT) Technology Demonstration (TD) project is addressing many operational needs of the future Canadian Army's Surveillance and Reconnaissance forces. Using the surveillance system of the Coyote reconnaissance vehicle as an experimental platform, the ALERT TD project aims to significantly enhance situational awareness by fusing multi-sensor and tactical data, developing automated processes, and integrating beyond line-of-sight sensing. The project is exploiting important advances made in computer processing capability, displays technology, digital communications, and sensor technology since the design of the original surveillance system. As the major research area within the project, concepts are discussed for displaying and fusing multi-sensor and tactical data within an Enhanced Operator Control Station (EOCS). The sensor data can originate from the Coyote's own visible-band and IR cameras, laser rangefinder, and ground-surveillance radar, as well as from beyond line-of-sight systems such as mini-UAVs and unattended ground sensors. Video-rate image processing has been developed to assist the operator to detect poorly visible targets. As a second major area of research, automatic target cueing capabilities have been added to the system. These include scene change detection, automatic target detection and aided target recognition algorithms processing both IR and visible-band images to draw the operator's attention to possible targets. The merits of incorporating scene change detection algorithms are also discussed. In the area of multi-sensor data fusion, up to Joint Defence Labs level 2 has been demonstrated. The human factors engineering aspects of the user interface in this complex environment are presented, drawing upon multiple user group sessions with military surveillance system operators. The paper concludes with Lessons Learned from the project. The ALERT system has been used in a number of C4ISR

  18. NASA's Exploration Technology Development Program Energy Storage Project Battery Technology Development

    Science.gov (United States)

    Reid, Concha M.; Miller, Thomas B.; Mercer, Carolyn R.; Jankovsky, Amy L.

    2010-01-01

    Technical Interchange Meeting was held at Saft America s Research and Development facility in Cockeysville, Maryland on Sept 28th-29th, 2010. The meeting was attended by Saft, contractors who are developing battery component materials under contracts awarded through a NASA Research Announcement (NRA), and NASA. This briefing presents an overview of the components being developed by the contractor attendees for the NASA s High Energy (HE) and Ultra High Energy (UHE) cells. The transition of the advanced lithium-ion cell development project at NASA from the Exploration Technology Development Program Energy Storage Project to the Enabling Technology Development and Demonstration High Efficiency Space Power Systems Project, changes to deliverable hardware and schedule due to a reduced budget, and our roadmap to develop cells and provide periodic off-ramps for cell technology for demonstrations are discussed. This meeting gave the materials and cell developers the opportunity to discuss the intricacies of their materials and determine strategies to address any particulars of the technology.

  19. Results from the Astronomy Diagnostic Test National Project

    Science.gov (United States)

    Deming, G. L.

    2001-12-01

    During 2000 and 2001, the validity and reliability of the Astronomy Diagnostic Test Version 2.0 (ADT 2.0) were formally investigated through the Astronomy Diagnostic Test National Project. The ADT 2.0 was administered as a pre-test to 5346 students and as a post-test to 3842 students. Student test results were collected from 97 classes that ranged in size from 4 to 320 students with 30 states represented. The 68 professors participating in the ADT National Project taught classes at universities (54%), 4-year colleges (27%), and 2-year colleges (19%). The database was analyzed for reliability at the Ontario Institute for Studies in Education. A pre-test value for Cronbach's alpha of 0.65 and post-test value of 0.76 demonstrate an acceptable degree of internal consistency. The average score for the 44 participating professors who completed the ADT as experts was 98%. Face and content validity were established by combining results from the experts with feedback from 60 student interviews. Student results from the National Project yielded an average score of 32.4% for the pre-test and 47.3% for the post-test. There is a gender discrepancy in favor of males that persists in both the pre-test (11% points) and the post-test (12% points) scores. The variations across geographic distribution and institution types were not significant. In addition to the 21 content items, the ADT 2.0 has 12 student background questions enabling instructors to have a better understanding of who takes introductory astronomy. This research was supported by the National Science Foundation through grants REC-0089239 (GD) and DGE-9714489 (BH).

  20. Investments in information systems and technology in the healthcare: Project management mediation

    Directory of Open Access Journals (Sweden)

    Jorge Gomes

    2017-03-01

    Full Text Available Healthcare organisations must improve their business practices and internal procedures in order to answer the increasing demand of health professionals and the general public for more and better information. Hospitals invest massively in information systems and technology (IS/IT in the hope that these investments will improve healthcare and meet patients’ demands. The main objective of our research is to study how organisational maturity, enhanced by investments in IS/IT, project management and best practices, leads to successful projects in public healthcare organisations. The rational of our model is that organisational maturity has a positive effect on IS/IT project success, and that this success is also positively enhanced by the use of project management practices. We emphasise that this combination of approaches can increase the effectiveness of projects. Furthermore, it can also improve the confidence that the results of investments will meet stakeholders’ expectations.

  1. Evolution of the GATE project: new results and developments

    Energy Technology Data Exchange (ETDEWEB)

    Santin, G. [ESA-ESTEC, Keplerlaan 1, 2200 AG Noordwijk (Netherlands); Staelens, S. [ELIS Department, Ghent University, B-9000 Ghent (Belgium); Taschereau, R. [CRUMP Institute for Molecular Imaging, University of California Los Angeles, 700 Westwood Plaza A438, Los Angeles, CA 90095-1770 (United States); Descourt, P. [U650 INSERM, LaTIM, Brest (France); Schmidtlein, C.R. [Memorial Sloan-Kettering Cancer Center, New York, New York, US (United States); Simon, L. [Department of Radiation Oncology, Institut Curie, Paris (France); Visvikis, D. [U650 INSERM, LaTIM, Brest (France); Jan, S. [Service Hospitalier Frederic Joliot (SHFJ), CEA-Orsay, Orsay (France); Buvat, I. [U678 INSERM, CHU Pitie-Salpetriere, Paris (France)

    2007-10-15

    We present the status of the Geant4 Application for Emission Tomography (GATE) project, a Monte Carlo simulator for Single Photon Emission Computed Tomography (SPECT) and Positron annihilation Emission Tomography (PET). Its main features are reminded, including modelling of time dependent phenomena and versatile, user-friendly scripting interface. The focus of this manuscript will be on new developments introduced in the past 4 years. New results have been achieved in the fields of validation on real medical and research PET and SPECT systems, voxel geometries, digitisation, distributed computing and dosimetry.

  2. Results of Needs Assessments Related to Citizen Science Projects

    Science.gov (United States)

    Buxner, Sanlyn; Bracey, Georgia; Glushko, Anna; Bakerman, Maya; Gay, Pamela L.; CosmoQuest Team

    2017-01-01

    The CosmoQuest Virtual Research Facility invites the public and classrooms to participate in NASA Science Mission Directorate related research that leads to publishable results and data catalogues. One of the main goals of the project is to support professional scientists in doing science and the general public--including parents, children, teachers, and students--in learning and doing science. Through the effort, the CosmoQuest team is developing a variety of supports and opportunities to support the doing and teaching of science. To inform our efforts, we have implemented a set of needs surveys to assess the needs of our different audiences. These surveys are being used to understand the interests, motivations, resources, challenges and demographics of our growing CosmoQuest community and others interested in engaging in citizen science projects. The surveys include those for teachers, parents, adult learners, planetarium professionals, subject matter experts (SMEs), and the general public. We will share the results of these surveys and discuss the implications of the results for broader education and outreach programs.

  3. Bilişim Teknolojisi Projelerinde Reel Opsiyonlar (Real Options in Information Technology Projects

    Directory of Open Access Journals (Sweden)

    İpek Deveci KOCAKOÇ

    2009-10-01

    Full Text Available Many sources such as the immaturity, complexity and unpredictable evolution of the technologies themselves, and the difficulty of predicting the market demand generally cause uncertainty in the Information Technology (IT projects. Managerial flexibility has value in the context of uncertain IT projects, as management can continuously gather information about uncertain project and market characteristics and, based on this information, change its course of action. As traditional capital budgeting (or project appraisal approaches fail to consider embedded managerial flexibility in projects, the new investment evaluation approach called “real options” has come on the scene recently. “Options thinking,” an emerging investment management philosophy based on the theory of financial options can provide a promising foundation for hedging the risks under uncertainty. This paper aims at analyzing a real IT investment having growth opportunities by using real options approach. Specifically, the value of investing in a software project as well as embedded flexibility in this opportunity is modeled as an option contract. The expected costs required for completing the project and thereafter the resulting asset value are considered as the base-case parameters of this contract. Option values derived from Binomial method are used for evaluating the project and the optimal investment policy is determined based on these values. As a result, it is shown that the value of an IT project having flexibility can differ from one obtained with traditional capital budgeting methods and a rejected project which was seen as unprofitable before can turn a profitable one through embedded flexibilities.

  4. Evaluating the incorporation of technology and application projects in the higher education mathematics classroom

    Science.gov (United States)

    Schreyer-Bennethum, Lynn; Albright, Leonard

    2011-01-01

    We report the qualitative and quantitative results of incorporating interdisciplinary application projects and increasing the use of teaching with technology into Calculus I, II and III at the University of Colorado Denver. Minimal changes were made to the curriculum and minimal time was required of instructors to make the changes. Instructors were given one 3-hour introduction to teaching with technology, a 3-hour introduction to one or two interdisciplinary problems to be used in the class, and course instructors met with each other no more than 1 hour per week. To evaluate the effectiveness of these modifications, 24 students were interviewed four times during a 2 year time span, student comments from student evaluations regarding the application projects were recorded, and the grade-point averages (GPAs) of four groups of 40 students for the year following their completion of Calculus III were analysed. The results show that students' enthusiasm and interest in interdisciplinary application projects were greater when the projects were enthusiastically endorsed by the instructor, but even with mixed instructor enthusiasm, incorporating application projects and increasing the use of technology in the classroom increase the well-roundedness of students' education and increase their performance in more advanced courses as measured by their overall GPA for the year following their Calculus III math class.

  5. Influence of consumers' cognitive style on results from projective mapping.

    Science.gov (United States)

    Varela, Paula; Antúnez, Lucía; Berget, Ingunn; Oliveira, Denize; Christensen, Kasper; Vidal, Leticia; Naes, Tormod; Ares, Gastón

    2017-09-01

    Projective mapping (PM), one of the most holistic product profiling methods in approach, is increasingly being used to uncover consumers' perception of products and packages. Assessors rely on a process of synthesis for evaluating product information, which would determine the relative importance of the perceived characteristics they use for mapping them. Individual differences are expected, as participants are not instructed on the characteristics to consider for evaluating the degree of difference among samples, generating different perceptual spaces. Individual differences in cognitive style can affect synthesis processes and thus their perception of similarities and differences among samples. In this study, the influence of the cognitive style in the results of PM was explored. Two consumer studies were performed, one aimed at describing intrinsic sensory characteristics of chocolate flavoured milk and the other one looking into extrinsic (package only) of blueberry yogurts. Consumers completed the wholistic-analytic module of the extended Verbal Imagery Cognitive Styles Test & Extended Cognitive Style Analysis-Wholistic Analytic Test, to characterize their cognitive style. Differences between wholistic and analytic consumers in how they evaluated samples using projective mapping were found in both studies. Analytics separated the samples more in the PM perceptual space than wholistic consumers, showing more discriminating abilities. This may come from a deeper analysis of the samples, both from intrinsic and extrinsic point of views. From a sensory perspective (intrinsic), analytic consumers relied on more sensory characteristics, while wholistic mainly discriminated samples according to sweetness and bitterness/chocolate flavour. In the extrinsic study however, even if analytic consumers discriminated more between packs, they described the products using similar words in the descriptive step. One important recommendation coming from this study is the need to

  6. Benefits from the U.S. photovoltaic manufacturing technology project

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, R.L.; Witt, C.E.; Thomas, H.P. [National Renewable Energy Lab., Golden, CO (United States)] [and others

    1996-05-01

    This paper examines the goals of the Photovoltaic Manufacturing Technology (PVMaT) project and its achievements in recapturing the investment by the photovoltaic (PV) industry and the public in this research. The PVMaT project was initiated in 1990 with the goal of enhancing the world-wide competitiveness of the U.S. PV industry. Based on the authors analysis, PVMaT has contributed to PV module manufacturing process improvements, increased product value, and reductions in the price of today`s PV products. An evaluation of success in this project was conducted using data collected from 10 of the PVMaT industrial participants in late fiscal year (FY) 1995. These data indicate a reduction of 56% in the weighted average module manufacturing costs from 1992 to 1996. During this same period, U.S. module manufacturing capacity has increased by more than a factor of 6. Finally, the analysis indicates that both the public and the manufacturers will recapture the funds expended in R&D manufacturing improvements well before the year 2000.

  7. GICHD mine dog testing project - soil sample results #4.

    Energy Technology Data Exchange (ETDEWEB)

    Barnett, James L.; Phelan, James M.; Archuleta, Luisa M.; Wood, Tyson B.; Donovan, Kelly L.; Bender, Susan Fae Ann

    2003-08-01

    A mine dog evaluation project initiated by the Geneva International Center for Humanitarian Demining is evaluating the capability and reliability of mine detection dogs. The performance of field-operational mine detection dogs will be measured in test minefields in Afghanistan and Bosnia containing actual, but unfused landmines. Repeated performance testing over two years through various seasonal weather conditions will provide data simulating near real world conditions. Soil samples will be obtained adjacent to the buried targets repeatedly over the course of the test. Chemical analysis results from these soil samples will be used to evaluate correlations between mine dog detection performance and seasonal weather conditions. This report documents the analytical chemical methods and results from the fourth batch of soils received. This batch contained samples from Kharga, Afghanistan collected in April 2003 and Sarajevo, Bosnia collected in May 2003.

  8. GICHD mine dog testing project : soil sample results #5.

    Energy Technology Data Exchange (ETDEWEB)

    Barnett, James L.; Phelan, James M.; Archuleta, Luisa M.; Donovan, Kelly L.; Bender, Susan Fae Ann

    2004-01-01

    A mine dog evaluation project initiated by the Geneva International Center for Humanitarian Demining is evaluating the capability and reliability of mine detection dogs. The performance of field-operational mine detection dogs will be measured in test minefields in Afghanistan containing actual, but unfused landmines. Repeated performance testing over two years through various seasonal weather conditions will provide data simulating near real world conditions. Soil samples will be obtained adjacent to the buried targets repeatedly over the course of the test. Chemical analysis results from these soil samples will be used to evaluate correlations between mine dog detection performance and seasonal weather conditions. This report documents the analytical chemical methods and results from the fifth batch of soils received. This batch contained samples from Kharga, Afghanistan collected in June 2003.

  9. Evaluation of Representative Smart Grid Investment Grant Project Technologies: Thermal Energy Storage

    Energy Technology Data Exchange (ETDEWEB)

    Tuffner, Francis K.; Bonebrake, Christopher A.

    2012-02-14

    This document is one of a series of reports estimating the benefits of deploying technologies similar to those implemented on the Smart Grid Investment Grant (SGIG) projects. Four technical reports cover the various types of technologies deployed in the SGIG projects, distribution automation, demand response, energy storage, and renewables integration. A fifth report in the series examines the benefits of deploying these technologies on a national level. This technical report examines the impacts of energy storage technologies deployed in the SGIG projects.

  10. Project JADE. Comparison of repository systems. Executive summary of results

    Energy Technology Data Exchange (ETDEWEB)

    Sandstedt, H. [Scandiaconsult Sverige AB, Stockholm (Sweden); Pers, K.; Birgersson, Lars [Kemakta Konsult AB, Stockholm (Sweden); Ageskog, L. [SWECO VBB VIAK AB, Stockholm (Sweden); Munier, R. [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)

    2001-12-01

    KBS-3 has since 1984 been the reference method for disposal of spent fuel in Sweden. Several other methods like WP-Cave, Very Deep Holes and Very Long Holes have been evaluated and compared with KBS-3. Though the methods have been judged to have a high safety potential, KBS-3 has been shown to provide advantages in the combined judgement of 'long-term performance and safety', 'technology' and 'costs'. In the present study, different variants of the KBS-3 method have been analysed and compared with the reference concept KBS-3 V (V for vertical). The variants are: KBS-3 H (H for horizontal) and MLH (medium long holes) - with canisters in a horizontal position, single or in a row respectively. The comparison has been carried out separately for the interim items 'technology', 'long-term performance and safety' and 'costs' respectively. The outcome in each of these comparisons have finally been combined in a ranking. This ranking placed KBS-3 V in the top followed by MLH and KBS-3 H. Vertical deposition of a single canister in one deposition hole, KBS-3 V, is robust as gravity is used for lowering the canister and the bentonite into the deposition hole and since each canister has its own barrier in the near field, which reduces the risk for interference between canisters. The drawback for MLH is the uncertainty about the emplacement technique as well as the impact of weak rock and water leakage into a long deposition hole for several canisters. The advantage is that a smaller volume of rock has to be excavated. This is positive regarding the long-term performance and safety, environmental impact and costs. KBS-3 H does not have the same positive potential. The conclusion of the JADE study is that KBS-3 V should remain as reference concept, and that MLH should be studied further with the aim of clarifying the technical feasibility of emplacement and the means of handling water inflow. It is recommended that KBS

  11. Preliminary results of direct cell-matrix assembly technology

    Institute of Scientific and Technical Information of China (English)

    LIU Haixia; YAN Yongnian; XIONG Zhuo; CHENG Jie; WANG Xiaohong; LIN Feng; WANG Changyong

    2005-01-01

    @@ Tissue loss and end-stage organ failure has been an emergent problem for humanity[1]. Solving this problem at the most basic level is currently an area of great interest to many researchers. At the end of the 20th century, tissue engineering technology began using formed scaffolds to indirectly control the assembly of cells. This technology has resulted in a new way to artificially fabricate tissues. But the method has been limited to simple tissue types, such as bone, skin, muscle and tendon[2―5]. The fabrication of complex organs by this technology is still not possible. A possible alternative is assembling cells directly into a viable and predefined structure[6―9].

  12. Summary results of an assessment of research projects in the National Photovoltaics Program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The Office of Energy Research (OER) undertook an assessment of 115 research projects (listed in Appendix A) sponsored by the National Photovoltaics Program. The Program is located within the Office of Energy Efficiency and Renewable Energy (EE). This report summarizes the results of that review. The Office of Solar Energy Conversion is responsible for the management of the National Photovoltaics Program. This program focuses on assisting US industry in development of fundamental technology to bring advanced photovoltaic energy systems to commercial use. The purpose of the assessment was to determine the following: (1) the quality of research of individual projects; (2) the impact of these individual projects on the mission of the program; and (3) the priority of future research opportunities.

  13. Initial Results from the New Stress Map of Texas Project

    Science.gov (United States)

    Lund Snee, J. E.; Zoback, M. D.

    2015-12-01

    Modern techniques for characterizing tectonic stress orientation and relative magnitude have been successfully used for more than 35 years. Nevertheless, large areas of North America lack high spatial resolution maps of stress orientation, magnitude, and faulting regime. In Texas, for example, geothermal resources. This year, we launched the Texas Stress Map project to characterize tectonic stress patterns at higher spatial resolution across Texas and nearby areas. Following a successful effort just completed in Oklahoma, we will evaluate borehole breakouts, drilling-induced tensile fractures, shear wave anisotropy, and earthquake data. The principal data source will be FMI (fullbore formation microimager), UBI (ultrasonic borehole imager), cross-dipole sonic, density, and caliper logs provided by private industry. Earthquake moment tensor solutions from the U.S. Geological Survey, Saint Louis University and other sources will also be used. Our initial focus is on the Permian Basin and Barnett Shale petroleum plays due to the availability of data, but we will expand our analysis across the state as the project progresses. In addition, we hope to eventually apply the higher spatial resolution data coverage to understanding tectonic and geodynamic characteristics of the southwestern United States and northeastern Mexico. Here we present early results from our work to constrain stress orientations and faulting regime in and near Texas, and we also provide a roadmap for the ongoing research.

  14. Assessing the maturity and re-usability of NASA's Advanced Information System Technology (AIST) Projects

    Science.gov (United States)

    Little, M. M.; Hines, K.

    2016-12-01

    Considerable funding has been invested in Earth science information technology (IT) projects by NASA over the past 15 years. While many of these projects succeeded at completing their objectives, rapid improvements in technology and growth in available data could further enhance the capabilities available to the Earth science community. Independent evaluation of these projects has become more and more important. Not only do they qualify the maturity of the work, but they give potential adopters the chance to kick the tires. One approach that has been used is to task Federally Funded Research and Development Corporations (FFRDC) with reviews and paper studies. Another approach involves field testing by third parties. Over the past three years, the AIST Program has tried both. This paper will describe both approaches and lessons learned from the experiences. The audience will be asked for their suggestions as to how to qualify and value these results.

  15. Structures and Design Phase I Summary for the NASA Composite Cryotank Technology Demonstration Project

    Science.gov (United States)

    Johnson, Ted; Sleight, David W.; Martin, Robert A.

    2013-01-01

    A description of the Phase I structures and design work of the Composite Cryotank Technology Demonstration (CCTD) Project is in this paper. The goal of the CCTD Project in the Game Changing Development (GCD) Program is to design and build a composite liquid-hydrogen cryogenic tank that can save 30% in weight and 25% in cost compared to state-of-the-art aluminum metallic cryogenic tank technology when the wetted composite skin wall is at an allowable strain of 5000 in/in. Three Industry teams developed composite cryogenic tank concepts that are compared for weight to an aluminum-lithium (Al-Li) cryogenic tank designed by NASA in Phase I of the CCTD Project. The requirements used to design all of the cryogenic tanks in Phase I will be discussed and the resulting designs, analyses, and weight of the concepts developed by NASA and Industry will be reviewed and compared.

  16. Using Information and Communication Technologies in Hospital Classrooms: SAVEH Project

    Directory of Open Access Journals (Sweden)

    Dolores Meneses

    2011-03-01

    Full Text Available Children suffering a serious illness, experience enormous changes in their daily lives. Not only does the direct consequences of the disease affect the child, but also the fact of being at a hospital, or at home and not being allowed to go to school. Frequently, connections with classmates, neighbors, and sometimes even some with his relatives are lost. Furthermore, the responsibility of the state, to continue his schooling process is much harder, since different communities (family, school teachers, hospital teachers, medical doctors, psychologists… have to be coordinated. Last but not least, entertainment and enjoyment should be provided to avoid boredom and to improve their affective state. At the same time, with the development of Information and Communication Technologies, a large number of solutions have arisen that allow people to enhance their communication, education and entertainment possibilities. These technologies seem perfectly suitable to be used to tackle the problems described above. In this article, some of the special necessities of children suffering from a serious illness are pointed out, technologies available to be facilitated are described and some initiatives taking place in Spain mentioned. The SAVEH project will be described in detail.

  17. Results Of The IMAGES Project 1986-1989; Facts And Fallacies

    Science.gov (United States)

    Ottes, Fenno P.; de Valk, Jan P.; Lodder, Herman; Stut, W. J.; van der Horst-Bruinsma, I.; Hofland, Paul L.; van Poppel, Bas M.; Ter Haar Romeny, Bart M.; Bakker, Albert R.

    1989-05-01

    A concise overview is presented on the results of the total IMAGIS (IMAGe Information System) research as carried out by BAZIS. This paper is intended as a continuation of the IMAGIS presentation at the 'Dutch PACS session' during the SPIE Medical Imaging H Conference 1988. That session was jointly organized by the Utrecht University Hospital (AZU), BAZIS and Philips Medical Systems, the partners within the Dutch PACS project. The HIS-PACS coupling/integration project has resulted in a HIS-PACS coupling that is used to transfer data from the BAZIS HIS to the prototype Philips PACS. The modelling and simulation project has resulted in a modelling and simulation package (MIRACLES), which has been used to suggest performance improvements of existing and future PACS's. To support the technology assessment project a PC program has been developed that calculates the financial consequences of the introduction of a PACS (CAPACITY). The diagnostic image quality evaluation project has provided research protocols and a software package (FEASIBLE) that have been used as an aid to execute observer performance studies. A software package (FRACTALS) has been developed so that a standard computer (113M RT PC) can be used as a simple image workstation for radiological research. Furthermore, a number of general issues concerning the development, the acceptance and the introduction of PACS are discussed.

  18. Flexible Electrostatic Technology for Capture and Handling Project

    Science.gov (United States)

    Keys, Andrew; Bryan, Tom; Horwitz, Chris; Rakoczy, John; Waggoner, Jason

    2015-01-01

    previous MSFC and NASA proposals or concepts can now be realized or simplified by the development of the this initial and future FETCH grippers including commercial resupply, Exploration vehicle assembly, Satellite servicing, and orbital debris removal since a major part of these missions is to align to and capture some handle. Completed Project (2013 - 2014) Flexible Electrostatic Technology for Capture & Handling Project Center Innovation Fund: MSFC CIF Program | Space Technology Mission Directorate (STMD) For more information visit techport.nasa.gov Some NASA technology projects are smaller (for example SBIR/STTR, NIAC and Center Innovation Fund), and will have less content than other, larger projects. Newly created projects may not sensors or injection of permanent adhesives. With gripping forces estimated between 0.5 and 2.5 pounds per square inch or 70-300 lb./sq. ft. of surface contact, the FETCH can turn-on and turn-off rapidly and repeatedly to enable sample handling, soft docking, in-space assembly, and precision relocation for accurate anchor adhesion.

  19. Performance Evaluation Management and Meta-norm Execution Cost of Major Science and Technology Project

    Institute of Scientific and Technical Information of China (English)

    Jianghua; HU

    2013-01-01

    Major science and technology project generally got high social expectations as a result of harge investment.To ensure that the science and technology teams follow the norms of S&T research and make full use of the investment,the effective norms maintenance mechanism must be established which includes punishment for violators and burnout of teams of supervisors,namely setting up the meta-norm execution mechanism.It is very important to establish the effective major science and technology project evaluation system to reduce the norm and metanorm execution cost.In this paper,the principles,methods and implementation system guarantee of evaluation system building are studied as well.

  20. FY 1999 report on the results of the project on the industrial science technology R and D. Development of utilization technology of biological resources such as bioconsortium system (Development of the petroleum substituting fuel production technology using living organisms); 1999 nendo sangyo gijutsu kenkyu kaihatsu jigyo. Fukugou seibutsukei tou seibutsu shigen riyo gijutsu kaihatsu (Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of developing the technology for producing and degrading useful substances using bioconsortia, study was made of the handling technology of bioconsortia, the basic element technology, etc., and the FY 1999 results were reported. In the study of the high-grade utilization technology of lignocellulose/the components, an sample was obtained in which the effect of the bacteria culture supernatant treatment was recognized in the biobleaching by co-treatment of the bacteria culture filtrate - MnP. As to the search for control factor of lignin degrading enzyme and the utilization technology, it was found out that bisphenol A was efficiently degraded by a combination of laccase and mediator production bacteria. Concerning the utilization technology of plant symbiotic bacteria, classification/identification have been finished of approximately 60% of the stored bacteria. In the study of the production technology of the petroleum substituting useful resource, a system was constructed in which immature embryos were used for callus induction and regeneration of plantlets, and plants were regenerated at high frequency via the formation of adventitious embryos. By this, the culture cell with high propagation ability was obtained. (NEDO)

  1. The latest results from CAST and the IAXO project

    CERN Document Server

    Dafni, Theopisti

    2014-01-01

    The CAST experiment has been the most sensitive helioscope so far. It has extended its sensitivity to the upper bounds of axion masses allowed by cosmology, entering well into the QCD-axion band. The preliminary analysis of the data taken with sensitivity to axion masses of the range 0.64 eV to 1.17 eV show no excess of signal above background and the coupling constant is restricted to g a g < 3 : 3 10 10 GeV 1 . While CAST continues with the aim to improve its results in the vacuum phase, IAXO is the new project proposed to build a dedicated magnet for axion searches that will supersede CAST’s sensitivity by one order of magnitude in g a g .

  2. Preliminary results on the cryogenic target for FIREX project

    Science.gov (United States)

    Iwamoto, A.; Maekawa, R.; Mito, T.; Okamoto, M.; Motojima, O.; Nakai, M.; Norimatsu, T.; Nagai, K.

    2006-06-01

    Preliminary tests on the cryogenic target for the fast ignition realization experiment (FIREX) project has been conducted. A foam shell method is proposed to realize its target design. A foam target consists of three parts: a foam shell, a conical laser guide and a liquid or gas feeder made of glass. The shell is a hollow sphere (500 μm in diameter) with a uniform and thin foam layer (˜ 20 μm in thickness). Epoxy resin is utilized to assemble the parts into the target. Regarding target fabrication, one of the concerns is the influence on various thermal contractions from the different materials when it is cooled down to cryogenic environment. This paper describes the result on the validity check at cryogenic environment and the demonstration of H{2} liquefaction using a dummy target instead of the foam target.

  3. The ACS LCID Project: overview and first results

    CERN Document Server

    Gallart, Carme

    2007-01-01

    The star formation history (SFH) of Local Group galaxies is a powerful tool for studying their evolution, including chemical enrichment histories and stellar population gradients, which in turn may shed light on the role of reionization or Supernovae feedback in galaxy formation and evolution. In particular, isolated dwarfs are ideal laboratories since their evolution has not been complicated by the vicinity of giant galaxies. In this paper, we present the project Local Cosmology from Isolated Dwarfs (LCID), aimed at deriving detailed SFHs for a sample of Local Group isolated dwarf galaxies. To accomplish this goal we have collected, using the ACS on board the HST, color-magnitude diagrams (CMD) reaching their oldest main sequence turnoff (V~28 or M_V~+3.5) with good photometric accuracy. Some preliminary results from the CMDs are shown and briefly discussed.

  4. Results of advanced batter technology evaluations for electric vehicle applications

    Energy Technology Data Exchange (ETDEWEB)

    DeLuca, W.H.; Gillie, K.R.; Kulaga, J.E.; Smaga, J.A.; Tummillo, A.F.; Webster, C.E.

    1992-01-01

    Advanced battery technology evaluations are performed under simulated electric-vehicle operating conditions at the Analysis Diagnostic Laboratory (ADL) of Argonne National Laboratory. The ADL results provide insight Into those factors that limit battery performance and life. The ADL facilities include a test laboratory to conduct battery experimental evaluations under simulated application conditions and a post-test analysis laboratory to determine, In a protected atmosphere if needed, component compositional changes and failure mechanisms. This paper summarizes the performance characterizations and life evaluations conducted during 1991--1992 on both single cells and multi-cell modules that encompass eight battery technologies (Na/S, Li/MS (M=metal), Ni/MH, Ni/Cd, Ni/Zn, Ni/Fe, Zn/Br, and Pb-acid). These evaluations were performed for the Department of Energy, Office of Transportation Technologies, Electric and Hybrid Propulsion Division, and the Electric Power Research Institute. The ADL provides a common basis for battery performance characterization and life evaluations with unbiased application of tests and analyses. The results help identify the most-promising R D approaches for overcoming battery limitations, and provide battery users, developers, and program managers with a measure of the progress being made in battery R D programs, a comparison of battery technologies, and basic data for modeling.

  5. THE APPLICATION OF FORESIGHT PROJECTS IN FORMATION OF TECHNOLOGICAL COMPANIES’ INNOVATION DEVELOPMENT STRATEGY

    Directory of Open Access Journals (Sweden)

    M. E. Zolotareva

    2016-01-01

    Full Text Available In the article is considered the possibility of application of methodology of foresight to the formation of strategy of innovative development of technological companies. The application of existing approaches to defining targets and goals of innovation development does not meet the requirements of the nonlinearity of the modern processes of technological companies’ innovation development.The goals and objectives. The purpose of this article is to study the possibilities of application of methods of foresight in forming of technological companies’ innovation development strategy. To achieve the goal, the author has solved the following problems: considered the interrelationship and interdependence between corporate strategy and technological companies’ innovation development strategy; defined the main problems of formation technological companies’ innovation development strategies; revealed the concept of "foresight" and diff erence in methodology of foresight and traditional forecasting techniques; defined the basic principles of foresight; presents the main stages of the foresight project implementation in technological companies.Research methods. The theoretical basis of the study are the publications of Russian and foreign scientists in the field of formation and development of innovation strategies through the application of foresight methods at the level of national innovation system and at company level. As a methodological basis of the study used methods of analysis, synthesis, induction method, deduction method, the comparison, was applied certain aspects of the synergetic analysis.Summary. The results of Russian and foreign researchers systematized by author confirm the possibility and necessity foresight projects implementation in formation and adjustment of technological companies’ innovation development strategies and in the national innovation system development. The principles of engagement of various social forces

  6. The CGEM-IT of the BESIII experiment: project update and test results in magnetic field

    Science.gov (United States)

    Mezzadri, G.

    2016-08-01

    The BESIII experiment is a multi-purpose detector operating on the electron- positron collider BEPCII in Beijing. Since 2008, the world's largest sample of J/ψ, ψ’ were collected. Due to increasing luminosity, the inner drift chamber is showing signs of aging. In 2014, an upgrade was proposed by the Italian collaboration based on the Cylindrical Gas Electron Multipliers (CGEM) technology, developed within the KLOE-II experiment, but with several new features and innovations. In this contribution, an overview of the project will be presented. Preliminary results of a beam test will be shown, with particular focus on the detector performance in magnetic field, with different configurations of electric field. A new readout mode, the µTPC readout, will also be described. The project has been recognized as a Significant Research Project within the Executive Programme for Scientific and Technological Cooperation between Italy and P.R.C for the years 2013-2015, and more recently has been selected as one of the project funded by the European Commission within the call H2020- MSCA-RISE-2014.

  7. Vehicle technologies heavy vehicle program : FY 2008 benefits analysis, methodology and results --- final report.

    Energy Technology Data Exchange (ETDEWEB)

    Singh, M.; Energy Systems; TA Engineering

    2008-02-29

    This report describes the approach to estimating the benefits and analysis results for the Heavy Vehicle Technologies activities of the Vehicle Technologies (VT) Program of EERE. The scope of the effort includes: (1) Characterizing baseline and advanced technology vehicles for Class 3-6 and Class 7 and 8 trucks, (2) Identifying technology goals associated with the DOE EERE programs, (3) Estimating the market potential of technologies that improve fuel efficiency and/or use alternative fuels, and (4) Determining the petroleum and greenhouse gas emissions reductions associated with the advanced technologies. In FY 08 the Heavy Vehicles program continued its involvement with various sources of energy loss as compared to focusing more narrowly on engine efficiency and alternative fuels. These changes are the result of a planning effort that first occurred during FY 04 and was updated in the past year. (Ref. 1) This narrative describes characteristics of the heavy truck market as they relate to the analysis, a description of the analysis methodology (including a discussion of the models used to estimate market potential and benefits), and a presentation of the benefits estimated as a result of the adoption of the advanced technologies. The market penetrations are used as part of the EERE-wide integrated analysis to provide final benefit estimates reported in the FY08 Budget Request. The energy savings models are utilized by the VT program for internal project management purposes.

  8. The Learning Process and Technological Change in Wind Power: Evidence from China's CDM Wind Projects

    Science.gov (United States)

    Tang, Tian; Popp, David

    2016-01-01

    The Clean Development Mechanism (CDM) is a project-based carbon trade mechanism that subsidizes the users of climate-friendly technologies and encourages technology transfer. The CDM has provided financial support for a large share of Chinese wind projects since 2002. Using pooled cross-sectional data of 486 registered CDM wind projects in China…

  9. The Learning Process and Technological Change in Wind Power: Evidence from China's CDM Wind Projects

    Science.gov (United States)

    Tang, Tian; Popp, David

    2016-01-01

    The Clean Development Mechanism (CDM) is a project-based carbon trade mechanism that subsidizes the users of climate-friendly technologies and encourages technology transfer. The CDM has provided financial support for a large share of Chinese wind projects since 2002. Using pooled cross-sectional data of 486 registered CDM wind projects in China…

  10. Factors that Impact Software Project Success in Offshore Information Technology (IT) Companies

    Science.gov (United States)

    Edara, Venkatarao

    2011-01-01

    Information technology (IT) projects are unsuccessful at a rate of 65% to 75% per year, in spite of employing the latest technologies and training employees. Although many studies have been conducted on project successes in U.S. companies, there is a lack of research studying the impact of various factors on software project success in offshore IT…

  11. Northwest Open Automated Demand Response Technology Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Kiliccote, Sila; Dudley, Junqiao Han; Piette, Mary Ann

    2009-08-01

    Lawrence Berkeley National Laboratory (LBNL) and the Demand Response Research Center (DRRC) performed a technology demonstration and evaluation for Bonneville Power Administration (BPA) in Seattle City Light's (SCL) service territory. This report summarizes the process and results of deploying open automated demand response (OpenADR) in Seattle area with winter morning peaking commercial buildings. The field tests were designed to evaluate the feasibility of deploying fully automated demand response (DR) in four to six sites in the winter and the savings from various building systems. The project started in November of 2008 and lasted 6 months. The methodology for the study included site recruitment, control strategy development, automation system deployment and enhancements, and evaluation of sites participation in DR test events. LBNL subcontracted McKinstry and Akuacom for this project. McKinstry assisted with recruitment, site survey collection, strategy development and overall participant and control vendor management. Akuacom established a new server and enhanced its operations to allow for scheduling winter morning day-of and day-ahead events. Each site signed a Memorandum of Agreement with SCL. SCL offered each site $3,000 for agreeing to participate in the study and an additional $1,000 for each event they participated. Each facility and their control vendor worked with LBNL and McKinstry to select and implement control strategies for DR and developed their automation based on the existing Internet connectivity and building control system. Once the DR strategies were programmed, McKinstry commissioned them before actual test events. McKinstry worked with LBNL to identify control points that can be archived at each facility. For each site LBNL collected meter data and trend logs from the energy management and control system. The communication system allowed the sites to receive day-ahead as well as day-of DR test event signals. Measurement of DR was

  12. Soft city culture and technology the Betaville Project

    CERN Document Server

    Skelton, Carl

    2014-01-01

    Soft City Culture and Technology: The Betaville Project discusses the complete cycle of conception, development, and deployment of the Betaville platform. Betaville is a massively participatory online environment for distributed 3D design and development of proposals for changes to the built environment– an experimental integration of art, design, and software development for the public realm. Through a detailed account of Betaville from a Big Crazy Idea to a working "deep social medium", the author examines the current conditions of performance and accessibility of hardware, software, networks, and skills that can be brought together into a new form of open public design and deliberation space, for and spanning and integrating the disparate spheres of art, architecture, social media, and engineering. Betaville is an ambitious enterprise, of building compelling and constructive working relationships in situations where roles and disciplinary boundaries must be as agile as the development process of the soft...

  13. Proceedings of the nuclear criticality technology safety project

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, R.G. [comp.

    1997-06-01

    This document contains summaries of the most of the papers presented at the 1994 Nuclear Criticality Technology Safety Project (NCTSP) meeting, which was held May 10 and 11 at Williamsburg, Va. The meeting was broken up into seven sessions, which covered the following topics: (1) Validation and Application of Calculations; (2) Relevant Experiments for Criticality Safety; (3) Experimental Facilities and Capabilities; (4) Rad-Waste and Weapons Disassembly; (5) Criticality Safety Software and Development; (6) Criticality Safety Studies at Universities; and (7) Training. The minutes and list of participants of the Critical Experiment Needs Identification Workgroup meeting, which was held on May 9 at the same venue, has been included as an appendix. A second appendix contains the names and addresses of all NCTSP meeting participants. Separate abstracts have been indexed to the database for contributions to this proceedings.

  14. The JPL parabolic dish project. [solar collectors technology development

    Science.gov (United States)

    Truscello, V. C.; Williams, A. N.

    1980-01-01

    The parabolic dish solar collector is a highly versatile concentrating collector system that can produce heat for many thermal processes and electricity by coupling the collector to a suitable heat engine. This paper discusses a project for the development of these collector systems and summarizes contracts with industry for developing the dish subsystems which include concentrator, receiver, and heat engine. An early market for dishes is the dispersed small community market which depends heavily on oil to operate diesel or steam turbine plants in order to generate electricity. The present contracts with industry for conducting engineering experiments using the developed dish hardware to demonstrate the technology in these early opportunity markets is also discussed.

  15. The HCV Synthesis Project: Scope, methodology, and preliminary results

    Directory of Open Access Journals (Sweden)

    Scheinmann Roberta

    2008-09-01

    Full Text Available Abstract Background The hepatitis C virus (HCV is hyper-endemic in injecting drug users. There is also excess HCV among non-injection drug users who smoke, snort, or sniff heroin, cocaine, crack, or methamphetamine. Methods To summarize the research literature on HCV in drug users and identify gaps in knowledge, we conducted a synthesis of the relevant research carried out between 1989 and 2006. Using rigorous search methods, we identified and extracted data from published and unpublished reports of HCV among drug users. We designed a quality assurance system to ensure accuracy and consistency in all phases of the project. We also created a set of items to assess study design quality in each of the reports we included. Results We identified 629 reports containing HCV prevalence rates, incidence rates and/or genotype distribution among injecting or non-injecting drug user populations published between January 1989 and December 2006. The majority of reports were from Western Europe (41%, North America (26%, Asia (11% and Australia/New Zealand (10%. We also identified reports from Eastern Europe, South America, the Middle East, and the Caribbean. The number of publications reporting HCV rates in drug users increased dramatically between 1989 and 2006 to 27–52 reports per year after 1998. Conclusion The data collection and quality assurance phases of the HCV Synthesis Project have been completed. Recommendations for future research on HCV in drug users have come out of our data collection phase. Future research reports can enhance their contributions to our understanding of HCV etiology by clearly defining their drug user participants with respect to type of drug and route of administration. Further, the use of standard reporting methods for risk factors would enable data to be combined across a larger set of studies; this is especially important for HCV seroconversion studies which suffer from small sample sizes and low power to examine risk

  16. The Development of Future Technology Teachers’ Artistic-Projective Abilities: Foreign Experience

    Directory of Open Access Journals (Sweden)

    Kurach Mykola

    2016-03-01

    Full Text Available The necessity to form and develop future technology teachers’ creative abilities has been stressed in the article. The psychologic-pedagogical researches of the leading specialists from Europe, the USA and Japan in the field of creative work and creativity have been analyzed. The main problems of the creative artistic-projective abilities development have been determined based on the analysis and synthesis of foreign and native philosophic, pedagogical and psychological literature dedicated to characteristics of such notions as “creative work” and “creativity”. Approaches and conceptions providing students – future technology teachers – with creative activities have been singled out. The gist of psychological mechanism for forming teachers’ creative personality has been established and its basic features have been determined as a result of the world experience of the theory and methods of creative abilities development generalization. The main features are as follows: an independence and an inclination towards divergent behavior; flexibility of thinking and readiness for everything new; motivation for self-actualization; striving for self-expressing and ability to creative work; ability to find out how to set and solve the problems. It has been mentioned that the technology teachers’ artistic-projective activity requires their creative abilities development, which, in their turn, are formed on the ground of well-developed general and special (art, projective, technological, pedagogical potencies. Therefore, the effectiveness of the students’ art-projective knowledge and skills forming depends upon the extent their general, special and creative abilities have been developed. That is why skillful and pedagogically correct organization of future technology teachers’ artistic-projective activities will inevitably provide the higher qualitatively new level of their creative abilities and creativity.

  17. Progress of the Photovoltaic Technology Incubator Project Towards an Enhanced U.S. Manufacturing Base: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Ullal, H.; Mitchell, R.; Keyes, B.; VanSant, K.; von Roedern, B.; Symko-Davies, M.; Kane, V.

    2011-07-01

    In this paper, we report on the major accomplishments of the U.S. Department of Energy's (DOE) Solar Energy Technologies Program (SETP) Photovoltaic (PV) Technology Incubator project. The Incubator project facilitates a company's transition from developing a solar cell or PV module prototype to pilot- and large-scale U.S. manufacturing. The project targets small businesses that have demonstrated proof-of-concept devices or processes in the laboratory. Their success supports U.S. Secretary of Energy Steven Chu's SunShot Initiative, which seeks to achieve PV technologies that are cost-competitive without subsidies at large scale with fossil-based energy sources by the end of this decade. The Incubator Project has enhanced U.S. PV manufacturing capacity and created more than 1200 clean energy jobs, resulting in an increase in American economic competitiveness. The investment raised to date by these PV Incubator companies as a result of DOE's $ 59 million investment totals nearly $ 1.3 billion.

  18. Fiscal 2000 report on results of project for R and D of industrial science and technology in cooperation with universities, and R and D of platform for designing high functional materials (development of energy use rationalization technology); 2000 nendo kokino zairyo sekkei platform no kenkyu kaihatsu seika hokokusho. Energy shiyo gorika gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    R and D was conducted concerning sophistication and high speeding in designing materials by simulation technology utilizing a new calculation method, with fiscal 2000 results compiled. A group working on coarse-grained molecular dynamics have tackled three problems such as the development and application of a multi-purpose coarse-grained molecular dynamics engine called COGNAC. A group on dynamic average domain method added various functions to a new multi-purpose dynamic average domain simulator called SUSI, and also achieved a variety of results by simulations using this simulator. A group on dispersed structure simulation has been proceeding with the development and application study of a multi-phase dynamics simulator called MUFFIN. A verification research group carried out verification of predictability, with the accuracy intended by each program, on thermal properties, optical properties, formability, etc., using polyethylene as the verification material. A platform group prepared a new high-speed platform that used less memory. (NEDO)

  19. Grandma's Games Project: Bridging Tradition and Technology Mediated Education

    Directory of Open Access Journals (Sweden)

    Marina Vasileva

    2014-02-01

    Full Text Available This article presents a project entitled "Grandma’s games", following a research idea to enrich the educational process of K9 students by introducing the traditional children games of our ancestors in the learning environment, revived and adapted for modern students with the aid of information and communication technology. While creating a strong connection between our heritage and the modern educational trends, the project’s intention goes beyond mere fulfilment of educational goals, striving to increase the interest and motivation of primary education students to develop their creativity and originality while learning, with respect of their own personal preferences and cultural heritage. The "Grandma’s games" research project engaged twelve traditional games in the educational activities at primary schools from both rural and non-rural environments in Republic of Macedonia. Descriptive statistics was applied on the data set sampled from the extensive survey conducted among teachers in these schools, to illustrate the benefits from the application of the Grandma’s games in educational process.

  20. ECUT (Energy Conversion and Utilization Technologies Program). Biocatalysis Project

    Science.gov (United States)

    1986-01-01

    Presented are the FY 1985 accomplishments, activities, and planned research efforts of the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Program. The Project's technical activities were organized as follows: In the Molecular Modeling and Applied Genetics work element, research focused on (1) modeling and simulation studies to establish the physiological basis of high temperature tolerance in a selected enzyme and the catalytic mechanisms of three species of another enzyme, and (2) determining the degree of plasmid amplification and stability of several DNA bacterial strains. In the Bioprocess Engineering work element, research focused on (1) studies of plasmid propagation and the generation of models, (2) developing methods for preparing immobilized biocatalyst beads, and (3) developing an enzyme encapsulation method. In the Process Design and Analysis work element, research focused on (1) further refinement of a test case simulation of the economics and energy efficiency of alternative biocatalyzed production processes, (2) developing a candidate bioprocess to determine the potential for reduced energy consumption and facility/operating costs, and (3) a techno-economic assessment of potential advancements in microbial ammonia production.

  1. Review of PV Inverter Technology Cost and Performance Projections

    Energy Technology Data Exchange (ETDEWEB)

    Navigant Consulting Inc.

    2006-01-01

    The National Renewable Energy Laboratory (NREL) has a major responsibility in the implementation of the U.S. Department of Energy's (DOE's) Solar Energy Technologies Program. Sandia National Laboratories (SNL) has a major role in supporting inverter development, characterization, standards, certifications, and verifications. The Solar Energy Technologies Program recently published a Multiyear Technical Plan, which establishes a goal of reducing the Levelized Energy Cost (LEC) for photovoltaic (PV) systems to $0.06/kWh by 2020. The Multiyear Technical Plan estimates that, in order to meet the PV system goal, PV inverter prices will need to decline to $0.25-0.30 Wp by 2020. DOE determined the need to conduct a rigorous review of the PV Program's technical and economic targets, including the target set for PV inverters. NREL requested that Navigant Consulting Inc.(NCI) conduct a review of historical and projected cost and performance improvements for PV inverters, including identification of critical barriers identified and the approaches government might use to address them.

  2. Achievements & bottlenecks in humanitarian demining EU-funded research: Final results from the EC DELVE project

    NARCIS (Netherlands)

    Sahli, H.; Bruschini, C.; Kempen, L. van; Schleijpen, H.M.A.; Breejen, E. den

    2008-01-01

    The EC DELVE Support Action project has analyzed the bottlenecks in the transfer of Humanitarian Demining (HD) technology from technology development to the use in the field, and drawn some lessons learned, basing itself on the assessment of the European Humanitarian Demining Research and Technology

  3. Expansion of Michigan EOR Operations Using Advanced Amine Technology at a 600 MW Project Wolverine Carbon Capture and Storage Project

    Energy Technology Data Exchange (ETDEWEB)

    H Hoffman; Y kishinevsky; S. Wu; R. Pardini; E. Tripp; D. Barnes

    2010-06-16

    Wolverine Power Supply Cooperative Inc, a member owned cooperative utility based in Cadillac Michigan, proposes to demonstrate the capture, beneficial utilization and storage of CO{sub 2} in the expansion of existing Enhanced Oil Recovery operations. This project is being proposed in response to the US Department of Energy Solicitation DE-FOA-0000015 Section III D, 'Large Scale Industrial CCS projects from Industrial Sources' Technology Area 1. The project will remove 1,000 metric tons per day of CO{sub 2} from the Wolverine Clean Energy Venture 600 MW CFB power plant owned and operated by WPC. CO{sub 2} from the flue gas will be captured using Hitachi's CO{sub 2} capture system and advanced amine technology. The capture system with the advanced amine-based solvent supplied by Hitachi is expected to significantly reduce the cost and energy requirements of CO{sub 2} capture compared to current technologies. The captured CO{sub 2} will be compressed and transported for Enhanced Oil Recovery and CO{sub 2} storage purposes. Enhanced Oil Recovery is a proven concept, widely used to recover otherwise inaccessible petroleum reserves. While post-combustion CO{sub 2} capture technologies have been tested at the pilot scale on coal power plant flue gas, they have not yet been demonstrated at a commercial scale and integrated with EOR and storage operations. Amine-based CO{sub 2} capture is the leading technology expected to be available commercially within this decade to enable CCS for utility and industrial facilities firing coal and waste fuels such as petroleum coke. However, traditional CO{sub 2} capture process utilizing commercial amine solvents is very energy intensive for regeneration and is also susceptible to solvent degradation by oxygen as well as SOx and NO{sub 2} in the flue gas, resulting in large operating costs. The large volume of combustion flue gas with its low CO{sub 2} concentration requires large equipment sizes, which together with the

  4. Ceramic Technology Project. Semiannual progress report for April 1993 through September 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The Ceramic Technology Project was originally developed by the Department of Energy`s Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS`s Materials Development Program, was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. During the course of the Ceramic Technology Project, remarkable progress has been made in the development of reliable structural ceramics. However, further work is needed to reduce the cost of ceramics to facilitate their commercial introduction, especially in the highly cost-sensitive automotive market. The work described in this report is organized according to the following WBS project elements: Project Management and Coordination; Materials and Processing; Materials Design Methodology; Data Base and Life Prediction; and Technology Transfer. This report includes contributions from all currently active project participants. Separate abstracts were prepared for the 47 projects reported here.

  5. The global unified parallel file system (GUPFS) project: FY 2002 activities and results

    Energy Technology Data Exchange (ETDEWEB)

    Butler, Gregory F.; Lee, Rei Chi; Welcome, Michael L.

    2003-04-07

    The Global Unified Parallel File System (GUPFS) project is a multiple-phase, five-year project at the National Energy Research Scientific Computing (NERSC) Center to provide a scalable, high performance, high bandwidth, shared file system for all the NERSC production computing and support systems. The primary purpose of the GUPFS project is to make it easier to conduct advanced scientific research using the NERSC systems. This is to be accomplished through the use of a shared file system providing a unified file namespace, operating on consolidated shared storage that is directly accessed by all the NERSC production computing and support systems. During its first year, FY 2002, the GUPFS project focused on identifying, testing, and evaluating existing and emerging shared/cluster file system, SAN fabric, and storage technologies; identifying NERSC user input/output (I/O) requirements, methods, and mechanisms; and developing appropriate benchmarking methodologies and benchmark codes for a parallel environment. This report presents the activities and progress of the GUPFS project during its first year, the results of the evaluations conducted, and plans for near-term and longer-term investigations.

  6. First Results from The Last Millennium Climate Reanalysis Project

    Science.gov (United States)

    Hakim, G. J.; Steig, E. J.; Emile-Geay, J.; Noone, D. C.; Anderson, D. M.; Tardif, R.; Steiger, N. J.; Perkins, W. A.

    2015-12-01

    Paleoclimate proxies provide the only measured record of Earth's climate history, but they are noisy and sparse in space and time. Climate model simulations provide dynamically consistent spatial fields, but lack a direct connection to specific climate states prior to the instrumental record. Paleoclimate data assimilation (PDA) provides an optimally weighted estimate of the climate state from these two sources of information based on their error characteristics. The Last Millennium Climate Reanalysis Project (LMR) uses an ensemble-based PDA method and annually-resolved proxy records to reconstruct Earth's climate for the past 1000 years on a regular latitude--longitude grid. First results of the LMR project are reported here. Proxy records used in the first LMR reconstructions include: trees (ring width and wood density), corals (d18O and luminescence), ice cores (d18O), and a small number of sediment and speleothem records. A component of the data assimilation approach that distinguishes it from other techniques concerns the use of proxy system models to estimate the proxy from climate variables from a model simulation. Proxies are linearly related to 2-meter air temperature in a calibration dataset. Given a prior estimate of the climate from a model (here, a randomly sampled 1000-year control integration of CCSM4), we estimate the proxy value from the linear relationship (derived independently from the model). LMR analyses are compared against both existing gridded reanalysis records and withheld proxy records. Results show a cooling trend in global-mean air temperature during 1000-1900 CE, which derives primarily from cooling of the Northern Hemisphere extratropics, offset by weak tropical warming. There is no evidence of a Medieval Climate Anomaly. During the 20th century, the LMR estimate of the global-mean air temperature compares very closely with other reanalysis products. Skill appears insensitive to the calibration dataset used to derive the proxy system

  7. Correlational Study of Risk Management and Information Technology Project Success

    Science.gov (United States)

    Gillespie, Seth J.

    2014-01-01

    Many IT projects fail despite the best efforts to keep these projects within budget, schedule, and scope. Few studies have looked at the effect of project risk management tools and techniques on project success. The primary focus of this study was to examine the extent to which utilization of project risk management processes influence project…

  8. Correlational Study of Risk Management and Information Technology Project Success

    Science.gov (United States)

    Gillespie, Seth J.

    2014-01-01

    Many IT projects fail despite the best efforts to keep these projects within budget, schedule, and scope. Few studies have looked at the effect of project risk management tools and techniques on project success. The primary focus of this study was to examine the extent to which utilization of project risk management processes influence project…

  9. Preliminary results of the PREFER FP7 Project

    Science.gov (United States)

    Fusilli, Lorenzo; Laneve, Giovanni; De Bonis, Roberto; Sebastian, Ana; Ferrucci, Fabrizio; Oliveira, Sandra

    2014-05-01

    The need to improve the information and intelligence support for forest fire prevention is widely recognized. Fire prevention is still the most cost-effective strategy when compared to firefighting and extinguishing that are costly, local, and triggered only in response to already ongoing crises. PREFER project, funded under the EU FP7 (G.A. 312931), intends to contribute at responding to such a pragmatic need of southern Europe's forests by: providing timely information products based on the exploitation of all available spacecraft sensors, offering a portfolio of products focused on pre- and post-crisis forest fire emergency, suitable for the users in the different countries of the European Mediterranean area. The PREFER Service portfolio consists of two main services: 1. Information Support to Fire Preparedness/Prevention Phase" (ISP) Service 2. Information Support to Fire Recovery/Reconstruction Phase" (ISR) Service This service is already at an advanced stage having completed the first year of activity. During this time several products have been consolidated: seasonal fuel maps; daily and seasonal fire hazard maps; seasonal risk maps; prescribed fire maps. This paper aims at presenting the preliminary results of the research activity carried out in the framework of the PREFER project, focusing, in particular, on these recalled above. As for Fire Risk and Hazard assessment, many indexes have been developed in the last years. Hardly any of them uses data derived from satellite images. The FPI index is an exception to this rule which, in addition, makes use of meteorological data. In spite of being a very complete index, the FPI still allows room for improvement which justify the interest of PREFER in it. PREFER's innovative approach to FPI will allow taking into account the effect of solar illumination conditions in determining the humidity present in the dead vegetation, and therefore its proneness to burn. PREFER innovation also focus in allowing the index to

  10. A Synthesis and Survey of Critical Success Factors for Computer Technology Projects

    Science.gov (United States)

    Baker, Ross A.

    2012-01-01

    The author investigated the existence of critical success factors for computer technology projects. Current research literature and a survey of experienced project managers indicate that there are 23 critical success factors (CSFs) that correlate with project success. The survey gathered an assessment of project success and the degree to which…

  11. 78 FR 29335 - Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects

    Science.gov (United States)

    2013-05-20

    ... Management, AMRDEC, 5400 Fowler Road, Redstone Arsenal, AL 35898-5000; ERDC: Personnel Demonstration Project... of the Secretary Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects AGENCY: Office of the Deputy Assistant Secretary of Defense (Civilian Personnel...

  12. 78 FR 64204 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2013-10-28

    ... published a notice of approval of a personnel management demonstration project for eligible ONR employees... of the Secretary Science and Technology Reinvention Laboratory Personnel Management Demonstration Project, Department of Navy, Office of Naval Research (ONR); Amendment and Corrections AGENCY:...

  13. Ceramic Technology Project database: September 1993 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1994-01-01

    Data presented in this report represent an intense effort to improve processing methods, testing methods, and general mechanical properties of candidate ceramics for use in advanced heat engines. Materials discussed include GN-10, GS-44, GTE PY6, NT-154, NT-164, sintered-reaction-bonded silicon nitrides, silicon nitride combined with rare-earth oxides, NT-230, Hexoloy SX-G1, Dow Corning`s {beta}-Si{sub 3}N{sub 4}, and a few whisker-reinforced ceramic composites. Information in this report was taken from the project`s semiannual and bimonthly progress reports and from final reports summarizing the results of individual studies. Test results are presented in tabular form and in graphs. All data, including test rig descriptions and material characterizations, are stored in the CTP database and are available to all project participants on request. Objective of this report is to make available the test results from these studies but not to draw conclusions from those data.

  14. Overview of the NASA Environmentally Responsible Aviation Project's Propulsion Technology Portfolio

    Science.gov (United States)

    Suder, Kenneth L.

    2012-01-01

    The NASA Environmentally Responsible Aviation (ERA) Project is focused on developing and demonstrating integrated systems technologies to TRL 4-6 by 2020 that enable reduced fuel burn, emissions, and noise for futuristic air vehicles. The specific goals aim to simultaneously reduce fuel burn by 50%, reduce Landing and Take-off Nitrous Oxides emissions by 75% relative to the CAEP 6 guidelines, and reduce cumulative noise by 42 Decibels relative to the Stage 4 guidelines. These goals apply to the integrated vehicle and propulsion system and are based on a reference mission of 3000nm flight of a Boeing 777-200 with GE90 engines. This paper will focus primarily on the ERA propulsion technology portfolio, which consists of advanced combustion, propulsor, and core technologies to enable these integrated air vehicle systems goals. An overview of the ERA propulsion technologies will be described and the status and results to date will be presented.

  15. The DICE calibration project: design, characterization, and first results

    CERN Document Server

    Regnault, N; Schahmanèche, K; Guillou, L Le; Antilogus, P; Astier, P; Barrelet, E; Betoule, M; Bongard, S; Cuillandre, J -C; Juramy, C; Pain, R; Rocci, P -F; Tisserand, P; Villa, F

    2015-01-01

    We describe the design, operation, and first results of a photometric calibration project, called DICE (Direct Illumination Calibration Experiment), aiming at achieving precise instrumental calibration of optical telescopes. The heart of DICE is an illumination device composed of 24 narrow-spectrum, high-intensity, light-emitting diodes (LED) chosen to cover the ultraviolet-to-near-infrared spectral range. It implements a point-like source placed at a finite distance from the telescope entrance pupil, yielding a flat field illumination that covers the entire field of view of the imager. The purpose of this system is to perform a lightweight routine monitoring of the imager passbands with a precision better than 5 per-mil on the relative passband normalisations and about 3{\\AA} on the filter cutoff positions. The light source is calibrated on a spectrophotometric bench. As our fundamental metrology standard, we use a photodiode calibrated at NIST. The radiant intensity of each beam is mapped, and spectra are m...

  16. [Strategies for improving care of oncologic patients: SHARE Project results].

    Science.gov (United States)

    Reñones Crego, María de la Concepción; Fernández Pérez, Dolores; Vena Fernández, Carmen; Zamudio Sánchez, Antonio

    2016-01-01

    Cancer treatment is a major burden for the patient and its family that requires an individualized management by healthcare professionals. Nurses are in charge of coordinating care and are the closest healthcare professionals to patient and family; however, in Spain, there are not standard protocols yet for the management of oncology patients. The Spanish Oncology Nursing Society developed between 2012 and 2014 the SHARE project, with the aim of establishing strategies to improve quality of life and nursing care in oncology patients. It was developed in 3 phases. First, a literature search and review was performed to identify nursing strategies, interventions and tools to improve cancer patients' care. At the second stage, these interventions were agreed within a group of oncology nursing experts; and at the third phase, a different group of experts in oncology care categorized the interventions to identify the ones with highest priority and most feasible to be implemented. As a result, 3 strategic actions were identified to improve nursing care during cancer treatment: To provide a named nurse to carry out the follow up process by attending to the clinic or telephonic consultation, develop therapeutic education with adapted protocols for each tumor type and treatment and ensure specific training for nurses on the management of the cancer patients. Strategic actions proposed in this paper aim to improve cancer patients' healthcare and quality of life through the development of advanced nursing roles based on a higher level of autonomy, situating nurses as care coordinators to assure an holistic care in oncology patients.

  17. Changing adolescent propensities to use drugs: results from Project ALERT.

    Science.gov (United States)

    Ellickson, P L; Bell, R M; Harrison, E R

    1993-01-01

    Do successful drug prevention programs suppress the risk factors they were intended to modify? This paper addresses that issue for Project ALERT, a school-based program for seventh and eighth graders that has been shown to curb both cigarette and marijuana use. Evaluated with over 4,000 students in an experimental test that included 30 diverse California and Oregon schools, the curriculum seeks to help young people develop both the motivation to avoid drugs and the skills they need to resist pro-drug pressures. Using regression analyses, we examine the program's impact on the intervening (cognitive) variables hypothesized to affect actual use: adolescent beliefs in their ability to resist, perceived consequences of use, normative perceptions about peer use and tolerance of drugs, and expectations of future use. The analysis depicts program effects for perceptions linked to each target substance (alcohol, cigarettes, and marijuana), across all students and for those at different levels of risk for future use. Results show that the curriculum successfully dampened cognitive risk factors from each of the above categories for both cigarettes and marijuana, indicating that social influence programs can mitigate a broad range of beliefs associated with the propensity to use drugs. However, it had a limited impact on beliefs about alcohol, the most widely used and socially accepted of the three drugs. Implications for drug prevention programs and practitioners are discussed.

  18. FPGAs in High Perfomance Computing: Results from Two LDRD Projects.

    Energy Technology Data Exchange (ETDEWEB)

    Underwood, Keith D; Ulmer, Craig D.; Thompson, David; Hemmert, Karl Scott

    2006-11-01

    Field programmable gate arrays (FPGAs) have been used as alternative computational de-vices for over a decade; however, they have not been used for traditional scientific com-puting due to their perceived lack of floating-point performance. In recent years, there hasbeen a surge of interest in alternatives to traditional microprocessors for high performancecomputing. Sandia National Labs began two projects to determine whether FPGAs wouldbe a suitable alternative to microprocessors for high performance scientific computing and,if so, how they should be integrated into the system. We present results that indicate thatFPGAs could have a significant impact on future systems. FPGAs have thepotentialtohave order of magnitude levels of performance wins on several key algorithms; however,there are serious questions as to whether the system integration challenge can be met. Fur-thermore, there remain challenges in FPGA programming and system level reliability whenusing FPGA devices.4 AcknowledgmentArun Rodrigues provided valuable support and assistance in the use of the Structural Sim-ulation Toolkit within an FPGA context. Curtis Janssen and Steve Plimpton provided valu-able insights into the workings of two Sandia applications (MPQC and LAMMPS, respec-tively).5

  19. The MiMeS project: first results

    Science.gov (United States)

    Grunhut, Jason H.; Alecian, E.; Bohlender, D. A.; Bouret, J.-C.; Henrichs, H.; Neiner, C.; Petit, V.; Louis, N. St.; Aurière, M.; Kochukhov, O.; Silvester, J.; Wade, G. A.; ud-Doula, A.; ud-Doula

    2009-04-01

    Massive stars are those stars with initial masses above about 8 times that of the sun, eventually leading to catastrophic explosions in the form of supernovae. These represent the most massive and luminous stellar component of the Universe, and are the crucibles in which the lion's share of the chemical elements are forged. These rapidly-evolving stars drive the chemistry, structure and evolution of galaxies, dominating the ecology of the Universe - not only as supernovae, but also during their entire lifetimes - with far-reaching consequences. Although the existence of magnetic fields in massive stars is no longer in question, our knowledge of the basic statistical properties of massive star magnetic fields is seriously incomplete. The Magnetism in Massive Stars (MiMeS) Project represents a comprehensive, multidisciplinary strategy by an international team of recognized researchers to address the “big questions” related to the complex and puzzling magnetism of massive stars. This paper present the first results of the MiMeS Large Program at the Canada-France-Hawaii Telescope.

  20. Results of I Love My Sun Project 2014-2016

    Science.gov (United States)

    Mosna, Zbysek; Macusova, Eva; Kouba, Daniel; Blanch, Estefania; Humlova, Danka

    2016-08-01

    I Love My Sun is educational project for 4-11 years old children (primary schools). It started as European COST 724 project developed by the team of prof. Dr. Y. Tulunay. During the event, children first draw their idea of the Sun. After that, about 20 min long presentation and discussion is performed by a young scientist in the field of Space and Plasma Physics. Finally, the children use new knowledge, draw their new idea of the Sun and the pictures "before" and "after" are compared. Czech version of the project has been performed since September 2014 in 16 classes of Czech primary schools. Spanish version of the project has been performed at the Ebro Observatory with 60 pre-school children. Up to now we collected more than 300 pairs of pictures.

  1. The Dust Management Project: Characterizing Lunar Environments and Dust, Developing Regolith Mitigation Technology and Simulants

    Science.gov (United States)

    Hyatt, Mark J.; Straka, Sharon A.

    2010-01-01

    A return to the Moon to extend human presence, pursue scientific activities, use the Moon to prepare for future human missions to Mars, and expand Earth?s economic sphere, will require investment in developing new technologies and capabilities to achieve affordable and sustainable human exploration. From the operational experience gained and lessons learned during the Apollo missions, conducting long-term operations in the lunar environment will be a particular challenge, given the difficulties presented by the unique physical properties and other characteristics of lunar regolith, including dust. The Apollo missions and other lunar explorations have identified significant lunar dust-related problems that will challenge future mission success. Comprised of regolith particles ranging in size from tens of nanometers to microns, lunar dust is a manifestation of the complex interaction of the lunar soil with multiple mechanical, electrical, and gravitational effects. The environmental and anthropogenic factors effecting the perturbation, transport, and deposition of lunar dust must be studied in order to mitigate it?s potentially harmful effects on exploration systems and human explorers. The Dust Management Project (DMP) is tasked with the evaluation of lunar dust effects, assessment of the resulting risks, and development of mitigation and management strategies and technologies related to Exploration Systems architectures. To this end, the DMP supports the overall goal of the Exploration Technology Development Program (ETDP) of addressing the relevant high priority technology needs of multiple elements within the Constellation Program (CxP) and sister ETDP projects. Project scope, plans, and accomplishments will be presented.

  2. FY 1999 report on the results of the project on the industrial science technology R and D. R and D of complex carbonhydrate production/utilization technology (Development of CO2 fixation/effective utilization technology by applying complex carbonhydrate); 1999 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo. Fukugo toushitsu seisan riyo gijutsu no kenkyu kaihatsu (Fukugo toushitsu oyo nisankatanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of making an industrial use of complex carbonhydrate performing an important function in substance recognition, etc., which cannot be realized by only nucleic acid, protein and lipid, the R and D of the basic technology related to the production/utilization were conducted, and the FY 1999 results were reported. In the study of synthesis/utilization/remodeling technology of complex carbonhydrate using the chemical synthesis method, the R and D were made not only on the synthesis of sugar chain but for the synthesis method of the peptide added with sugar chain, that is, glycopeptide. Further, as to the reaction with the aim of the application, there was hope for large-quantity synthesis of milk oligosaccharide by the oxygen method. In the study of the design technology of complex carbonhydrate molecules, the systematical analysis using the model glycopeptide was conducted of effects of the sugar chain addition part and sugar chain structure on the 3D structure and physiological activity. Concerning the synthesis/utilization/remodeling technology of complex carbonhydrate using the biological method, study was made of the animal cell utilization, microorganism utilization, technology of structural analysis of complex carbonhydrate, etc. (NEDO)

  3. Thermal Protection System Materials (TPSM): Heat Shield for Extreme Entry Environment Technology (HEEET) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Heatshield for Extreme Entry Environ­ment Technology (HEEET) project seeks to mature a game changing Woven Ther­mal Protection System (TPS) technology to...

  4. Business planning innovative projects: the essence of technology, advantages and disadvantages

    Directory of Open Access Journals (Sweden)

    S.V. Knyaz

    2012-06-01

    Full Text Available The article substantiates the necessity to develop technology business planning innovative projects. Arguments made by the ground analysis of the advantages and disadvantages of existing business planning technologies.

  5. The QUIJOTE experiment: project status and first scientific results

    Science.gov (United States)

    Rubiño-Martín, J. A.; Génova-Santos, R.; Rebolo, R.; Aguiar, Cózar-Castellano, J. M.; Gómez-Reñasco, F.; Gutiérrez, C.; Hoyland, R. J.; López-Caraballo, C.; Peláez-Santos, A. E.; Pérez-de-Taoro, M. R.; Poidevin, F.; Ruiz-Granados, B.; Sánchez de la Rosa, V.; Tramonte, D.; Vega-Moreno, A.; Viera-Curbelo, T.; Vignaga, R.; Martínez-González, E.; Barreiro, R. B.; Casaponsa, B.; Casas, F. J.; Diego, J. M.; Fernández-Cobos, R.; Herranz, D.; López-Caniego, M.; Ortiz, D.; Vielva, P.; Artal, E.; Aja, B.; Cagigas, J.; Cano, J. L.; de la Fuente, J.; Mediavilla, A.; Terán, J. V.; Villa, E.; Piccirillo, L.; Dickinson, C.; Grainge, K.; Harper, S.; Maffei, B.; McCulloch, M.; Melhuish, S.; Pisano, G.; Watson, R. A.; Lasenby, A.; Ashdown, M.; Perrott, Y.; Razavi-Ghods, N.; Titterington, D.; Scott, P.

    2017-03-01

    We present the current status of the QUIJOTE (Q-U-I JOint TEnerife) experiment, a new polarimeter with the aim of characterizing the polarization of the Cosmic Microwave Background, and other galactic or extra-galactic physical processes that emit in microwaves in the frequency range 10-42 GHz, and at largeangular scales (around 1 degree resolution). The experiment has been designed to reach the required sensitivity to detect a primordial gravitational wave component in the CMB, provided its tensor-to-scalar ratio is larger than r˜0.05. The project consists of two telescopes and three instruments which will survey a large sky area from the Teide Observatory to provide I, Q and U maps of high sensitivity. The first QUIJOTE instrument, known as Multi-Frequency Instrument (MFI), has been surveying the northern sky in four individual frequencies between 10 and 20 GHz since November 2012, providing data with an average sensitivity of 80 μK/beam in Q and U in a region of 20,000 square-degrees. The second instrument, or Thirty-GHz Instrument (TGI), is currently undergoing the commissioning phase, and the third instrument, or Forty-GHz Instrument (FGI), is in the final fabrication phase. Finally, we describe the first scientific results obtained with the MFI. Some specific regions, mainly along the Galactic plane, have been surveyed to a deeper depth, reaching sensitivities of around 40 μK/beam. We present new upper limits on the polarization of the anomalous dust emission, resulting from these data, in the Perseus molecular complex and in the W43 molecular complex.

  6. Expedited technology demonstration project final report: final forms

    Energy Technology Data Exchange (ETDEWEB)

    Hopper, R W

    1999-05-01

    ETDP Final Forms was an attempt to demonstrate the fabrication and performance of a ceramic waste form immobilizing the hazardous and radioactive elements of the MSO/SR mineral residues. The ceramic material had been developed previously. The fabrication system was constructed and functioned as designed except for the granulator. Fabrication of our particular ceramic, however, proved unsatisfactory. The ceramic material design was therefore changed toward the end of the project, replacing nepheline with zircon as the sink for silica. Preliminary results were encouraging, but more development is needed. Fabrication of the new ceramic requires major changes in the processing: Calcination and granulation would be replaced by spray drying; and sintering would be at higher temperature. The main goal of the project--demonstrating the fabrication and performance of the waste form--was not achieved. This report summarizes Final Forms' activities. The problem of immobilizing the MSO/SR mineral residues is discussed.

  7. Preliminary Characterization Results from the DebriSat Project

    Science.gov (United States)

    Rivero, M.; Shiotani, B.; Kleespies, J.; Toledo-Burdett, R.; Moraguez, M.; Carrasquila, M.; Fitz-Coy, N.; Liou, J.-C.; Sorge, M.; Huynh, T.

    2016-01-01

    The DebriSat project is a continuing effort sponsored by NASA and DoD to update existing break-up models using data obtained from two separate hypervelocity impact tests used to simulate on-orbit collisions. To protect the fragments resulting from the impact tests, "soft-catch" arenas made of polyurethane foam panels were utilized. After each impact test, the test chamber was cleaned and debris resulting from the catastrophic demise of the test article were collected and shipped to the University of Florida for post-impact processing. The post-impact processing activities include collecting, characterizing, and cataloging of the fragments. Since the impact tests, a team of students has been working to characterize the fragments in terms of their mass, size, shape, color and material content. The focus of the 20 months since the impact tests has been on the collection of 2 millimeters- and larger fragments resulting from impact test on the 56 kilogram-representative LEO (Low Earth Orbit) satellite referred to as DebriSat. To date we have recovered in excess of 115,000 fragments, 30,000 more than the prediction of 85,000 fragments from the existing model. We continue to collect fragments but have transitioned to the characterization phase of the post-impact activities. Since the start of the characterization phase, the focus has been to utilize automation to (i) expedite fragment characterization process and (ii) minimize human-in-the- loop. We have developed and implemented such automated processes; e.g., we have automated the data entry process to reduce operator errors during transcription of the measurement data. However, at all steps of the process, there is human oversight to ensure the integrity of the data. Additionally, we have developed and implemented repeatability and reproducibility tests to ensure that the instrumentation used in the characterization process is accurate and properly calibrated. In this paper, the implemented processes are described and

  8. CEM ultrasonic flow monitoring design, installation and certification results at the Salt River Project

    Energy Technology Data Exchange (ETDEWEB)

    Rihs, P.W. [Salt River Project, Saint Johns, AZ (United States). Coronado Generating Station

    1995-12-31

    This presentation will include Salt River Project`s design, installation, experiences and results using ultrasonic flow monitoring equipment for certification of continuous emissions monitoring systems. Flow Monitoring is the newest and has been the most controversial component of CEM systems. Experience in measuring flue gas volumetric flow prior to CEMs was very limited. There are currently three basic techniques used to measure gas flow: (1) thermal sensing using hotwire anemometer or thermal dispersion; (2) differential pressure (pitot tube and annubar); (3) acoustic using ultrasonic transducers. The Salt River Project (SRP) operates a variety of affected generating stations: coal, gas and oil. Ultrasonic flow monitoring technology was chosen for all affected generating stations which the author operates. SRP`s approach and reasoning for choosing ultrasonic systems will be discussed. A review of each generating station`s flow monitoring system will be presented. The presentation will include, but may not be limited to, the following: general facilities, description and schematics; physical installations, plan and section drawings; design considerations; results of flow monitors certification testing; and CEMs Project Manager`s conclusions.

  9. Technology Performance Report: Duke Energy Notrees Wind Storage Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Wehner, Jeff [Duke Energy Renewables, Charlotte, NC (United States); Mohler, David [Duke Energy Renewables, Charlotte, NC (United States); Gibson, Stuart [Duke Energy Renewables, Charlotte, NC (United States); Clanin, Jason [Duke Energy Renewables, Charlotte, NC (United States); Faris, Don [Duke Energy Renewables, Charlotte, NC (United States); Hooker, Kevin [Duke Energy Renewables, Charlotte, NC (United States); Rowand, Michael [Duke Energy Renewables, Charlotte, NC (United States)

    2015-11-01

    Duke Energy Renewables owns and operates the Notrees Wind Farm in west Texas’s Ector and Winkler counties. The wind farm, which was commissioned in April 2009, has a total capacity of 152.6 MW generated by 55 Vestas V82 turbines, one Vestas 1-V90 experimental turbine, and 40 GE 1.5-MW turbines. The Vestas V82 turbines have a generating capacity of 1.65 MW each, the Vestas V90 turbine has a generating capacity of 1.86 MW, and the GE turbines have a generating capacity of 1.5 MW each. The objective of the Notrees Wind Storage Demonstration Project is to validate that energy storage increases the value and practical application of intermittent wind generation and is commercially viable at utility scale. The project incorporates both new and existing technologies and techniques to evaluate the performance and potential of wind energy storage. In addition, it could serve as a model for others to adopt and replicate. Wind power resources are expected to play a significant part in reducing greenhouse gas emissions from electric power generation by 2030. However, the large variability and intermittent nature of wind presents a barrier to integrating it within electric markets, particularly when competing against conventional generation that is more reliable. In addition, wind power production often peaks at night or other times when demand and electricity prices are lowest. Energy storage systems can overcome those barriers and enable wind to become a valuable asset and equal competitor to conventional fossil fuel generation.

  10. Results of SEI Independent Research and Development Projects

    Science.gov (United States)

    2008-07-01

    Motorola 1998] M-CORE – MMC2001 Reference Manual. Motorola Corporation, 1998. (A 32-bit processor). http://www.ec66.com/ market /sheet/MMC2001RM.pdf...integration or business-to-business ( B2B ) commerce [Tilley 2004]. Brandner, et al., claim enhanced integration capabilities of a core banking...Pujari discusses the pros and cons of self-service technology, potentially enabled by SOA technologies, in the Canadian B2B industry [Pujari 2004

  11. Occupational emerging risks affecting international virtual project Team Results

    Directory of Open Access Journals (Sweden)

    Dumitraşcu-Băldău Iulia

    2017-01-01

    Full Text Available The expansion of internet access, high-speed connection services, collaborative work platforms and tools, allowed employees to interact virtually offering companies the possibility to develop projects around the world, reducing operational costs and gain competitive advantage. Realizing the advantages and disadvantages of developing a project team in an international virtual work environment, requires adopting specific strategies to construct an effective team and ensure the project success. One of the most important disadvantages that we identified is that the new work environment brings new risks for both team members and managers. So, it becomes mandatory to identify and analyze the occupational emerging risks and their impact on the productivity of virtual team members, in order to prevent them efficiently and to ensure the safety and health of employees in a virtual working environment. This paper aims to highlight the necessity for project managers and organizations, to include in their specific project strategies, an efficient occupational risks management in the virtual workplace, to obtain a continuously improved virtual working environment, so to achieve a high performance from virtual employees.

  12. Tehachapi Wind Energy Storage Project - Technology Performance Report #3

    Energy Technology Data Exchange (ETDEWEB)

    Pinsky, Naum [Southern California Edison, Rosemead, CA (United States); O' Neill, Lori [Southern California Edison, Rosemead, CA (United States)

    2017-03-31

    The TSP is located at SCE’s Monolith Substation in Tehachapi, California. The 8 MW, 4 hours (32 MWh) BESS is housed in a 6,300 square foot facility and 2 x 4 MW/4.5 MVA smart inverters are on a concrete pad adjacent to the BESS facility. The project will evaluate the capabilities of the BESS to improve grid performance and assist in the integration of large-scale intermittent generation, e.g., wind. Project performance was measured by 13 specific operational uses: providing voltage support and grid stabilization, decreasing transmission losses, diminishing congestion, increasing system reliability, deferring transmission investment, optimizing renewable-related transmission, providing system capacity and resources adequacy, integrating renewable energy (smoothing), shifting wind generation output, frequency regulation, spin/non-spin replacement reserves, ramp management, and energy price arbitrage. Most of the operations either shift other generation resources to meet peak load and other electricity system needs with stored electricity, or resolve grid stability and capacity concerns that result from the interconnection of intermittent generation. SCE also demonstrated the ability of lithium ion battery storage to provide nearly instantaneous maximum capacity for supply-side ramp rate control to minimize the need for fossil fuel-powered back-up generation. The project began in October, 2010 and will continue through December, 2016.

  13. Slope excavation quality assessment and excavated volume calculation in hydraulic projects based on laser scanning technology

    Directory of Open Access Journals (Sweden)

    Chao Hu

    2015-04-01

    Full Text Available Slope excavation is one of the most crucial steps in the construction of a hydraulic project. Excavation project quality assessment and excavated volume calculation are critical in construction management. The positioning of excavation projects using traditional instruments is inefficient and may cause error. To improve the efficiency and precision of calculation and assessment, three-dimensional laser scanning technology was used for slope excavation quality assessment. An efficient data acquisition, processing, and management workflow was presented in this study. Based on the quality control indices, including the average gradient, slope toe elevation, and overbreak and underbreak, cross-sectional quality assessment and holistic quality assessment methods were proposed to assess the slope excavation quality with laser-scanned data. An algorithm was also presented to calculate the excavated volume with laser-scanned data. A field application and a laboratory experiment were carried out to verify the feasibility of these methods for excavation quality assessment and excavated volume calculation. The results show that the quality assessment indices can be obtained rapidly and accurately with design parameters and scanned data, and the results of holistic quality assessment are consistent with those of cross-sectional quality assessment. In addition, the time consumption in excavation project quality assessment with the laser scanning technology can be reduced by 70%−90%, as compared with the traditional method. The excavated volume calculated with the scanned data only slightly differs from measured data, demonstrating the applicability of the excavated volume calculation method presented in this study.

  14. Individualized Mathematics Teaching. Results from the IMU Project in Sweden.

    Science.gov (United States)

    Larsson, Inger

    The Individual Mathematics Teaching Project (IMU) has been under development in the upper level (grades 7-9) of the comprehensive school in Sweden since 1964. Its goals are (1) to construct and test self-instruction study material in mathematics, (2) to find suitable teaching methods and work forms for the use of this material, (3) to try out…

  15. Changing Adolescent Propensities to Use Drugs: Results from Project ALERT.

    Science.gov (United States)

    Ellickson, Phyllis L.; And Others

    1993-01-01

    Evaluation with over 4,000 seventh and eighth graders in California and Oregon showed that Project ALERT, a curriculum to curb drug use by teaching resistance to pressures, successfully dampened cognitive risk factors for cigarette and marijuana use but had limited impact on beliefs about alcohol. (SK)

  16. Results of the MITRA project: Monitoring and intervention for the transportation of dangerous goods

    Energy Technology Data Exchange (ETDEWEB)

    Planas, E. [Centre d' Estudis del Risc Tecnologic (CERTEC), Departament d' Enginyeria Quimica, Universitat Politecnica de Catalunya, Diagonal 647, 08028-Barcelona, Catalonia (Spain)], E-mail: eulalia.planas@upc.edu; Pastor, E. [Centre d' Estudis del Risc Tecnologic (CERTEC), Departament d' Enginyeria Quimica, Universitat Politecnica de Catalunya, Diagonal 647, 08028-Barcelona, Catalonia (Spain); Presutto, F. [M3 Systems, 1 Rue des Oiseaux, 31410 Lavernose (France); Tixier, J. [Ecole des Mines d' Ales, Ales (France)

    2008-04-01

    The objective of the MITRA (monitoring and intervention for the transportation of dangerous goods) project was to prototype a new operational system for monitoring the transportation of dangerous goods in Europe based on regional responsibilities. This concept, based on systems used in air traffic control, aims to provide civil security centres with real-time knowledge of the position and contents of dangerous vehicles circulating in their area of responsibility, and, in the event of a dangerous situation, to issue warnings, alerts and crisis management information, thereby allowing intervention teams to react immediately with maximum safety. The project was funded by the European Commission under the 6th Framework Programme (STREP - specific targeted research project - under the Information Society Technologies priority). It started on 1 September 2004 and ended on 31 October 2006. This paper presents the results of this project and the conclusions derived from the field tests carried out in Germany and in the French/Spanish border region in order to test the proposed operational system.

  17. Using census data for household projections: an overview of results from the HOMES Project.

    Science.gov (United States)

    Mason, A; Racelis, R

    1991-01-01

    "This article provides an overview of the household projection model HOMES [a computer model developed to forecast the number and characteristics of households] and presents new household projections for six countries--China, Indonesia, Japan, the Republic of Korea, Thailand, and the Philippines. The household projections are based on recently released population projections from The World Bank and on rules governing living arrangements quantified with the latest available census or demographic survey for each country. Growth in the number of households to the year 2030 is projected along with changes in household membership and the dependency burden."

  18. Miniature Sensor Technology Integration (MSTI) Flight Test Results

    OpenAIRE

    Erickson, David; Feig, Jason; Grigsby, Ed; Carlson, Alan

    1994-01-01

    The MSTI-2 satellite mission is the second in a series established to test, in realistic scenarios, miniature spacecraft and sensor technologies for missile detection and tracking on low cost, low-earth orbit technology demonstration satellites. Cooperative demonstrations are planned to combine MSTI-provided target track file information, with interceptor technology tests, to fully demonstrate technologies associated with theater missile defense (TMO) targeting. The program is sponsored by th...

  19. Final Results From the Circumarctic Lakes Observation Network (CALON) Project

    Science.gov (United States)

    Hinkel, K. M.; Arp, C. D.; Eisner, W. R.; Frey, K. E.; Grosse, G.; Jones, B. M.; Kim, C.; Lenters, J. D.; Liu, H.; Townsend-Small, A.

    2015-12-01

    Since 2012, the physical and biogeochemical properties of ~60 lakes in northern Alaska have been investigated under CALON, a project to document landscape-scale variability of Arctic lakes in permafrost terrain. The network has ten nodes along two latitudinal transects extending inland 200 km from the Arctic Ocean. A meteorological station is deployed at each node and six representative lakes instrumented and continuously monitored, with winter and summer visits for synoptic assessment of lake conditions. Over the 4-year period, winter and summer climatology varied to create a rich range of lake responses over a short period. For example, winter 2012-13 was very cold with a thin snowpack producing thick ice across the region. Subsequent years had relatively warm winters, yet regionally variable snow resulted in differing gradients of ice thickness. Ice-out timing was unusually late in 2014 and unusually early in 2015. Lakes are typically well-mixed and largely isothermal, with minor thermal stratification occurring in deeper lakes during calm, sunny periods in summer. Lake water temperature records and morphometric data were used to estimate the ground thermal condition beneath 28 lakes. Application of a thermal equilibrium steady-state model suggests a talik penetrating the permafrost under many larger lakes, but lake geochemical data do not indicate a significant contribution of subpermafrost groundwater. Biogeochemical data reveal distinct spatial and seasonal variability in chlorophyll biomass, chromophoric dissolved organic carbon (CDOM), and major cations/anions. Generally, waters sampled beneath ice in April had distinctly higher concentrations of inorganic solutes and methane compared with August. Chlorophyll concentrations and CDOM absorption were higher in April, suggesting significant biological/biogeochemical activity under lake ice. Lakes are a positive source of methane in summer, and some also emit nitrous oxide and carbon dioxide. As part of the

  20. Fiscal 1998 R and D project on global environmental industrial technology. R and D result report on environment- friendly production technology (advanced chemical synthesis reactor); 1998 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Kankyo chowagata seisan gijutsu (kokino kagaku gosei bio reactor) kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For high-efficiency production of substances by bioreactor, study was made on a bio-control mechanism as its elementary technology. On the study of breeding technology by expression control, the structure design of a control region and development of new expression vectors had been finished, and study was made on breeding of high-efficiency recombinant production cells by using candidate expression vectors. On the study of breeding technology by multi-stage enzyme reaction control, the enzyme gene of a system synthesizing cysteine from glycerol was searched, and hydroxypyruvaldehyde hydrogenase gene was isolated as substance production model. Cysteine production Escherichia coli combined with serineacetyl transferase gene was also prepared. In addition, study started on cloning of hydroxyacetone oxidase gene. On development of reactor system technology, for conversion of serine to cysteine, study was made on optimization of a reaction condition by theory of enzyme reaction rate. (NEDO)

  1. Immobilized cell technology in beer brewing: Current experience and results

    Directory of Open Access Journals (Sweden)

    Leskošek-Čukalov Ida J.

    2005-01-01

    Full Text Available Immobilized cell technology (ICT has been attracting continual attention in the brewing industry over the past 30 years. Some of the reasons are: faster fermentation rates and increased volumetric productivity, compared to those of traditional beer production based on freely suspended cells, as well as the possibility of continuous operation. Nowadays, ICT technology is well established in secondary fermentation and alcohol- free and low-alcohol beer production. In main fermentation, the situation is more complex and this process is still under scrutiny on both the lab and pilot levels. The paper outlines the most important ICT processes developed for beer brewing and provides an overview of carrier materials, bioreactor design and examples of their industrial applications, as well as some recent results obtained by our research group. We investigated the possible applications of polyvinyl alcohol in the form of LentiKats®, as a potential porous matrices carrier for beer fermentation. Given are the results of growth studies of immobilized brewer's yeast Saccharomyces uvarum and the kinetic parameters obtained by using alginate microbeads with immobilized yeast cells and suspension of yeast cells as controls. The results indicate that the immobilization procedure in LentiKat® carriers has a negligible effect on cell viability and growth. The apparent specific growth rate of cells released in medium was comparable to that of freely suspended cells, implying preserved cell vitality. A series of batch fermentations performed in shaken flasks and an air-lift bioreactor indicated that the immobilized cells retained high fermentation activity. The full attenuation in green beer was reached after 48 hours in shaken flasks and less than 24 hours of fermentation in gas-lift bioreactors.

  2. Energy and cost saving results for advanced technology systems from the Cogeneration Technology Alternatives Study (CTAS)

    Science.gov (United States)

    Sagerman, G. D.; Barna, G. J.; Burns, R. K.

    1979-01-01

    An overview of the organization and methodology of the Cogeneration Technology Alternatives Study is presented. The objectives of the study were to identify the most attractive advanced energy conversion systems for industrial cogeneration applications in the future and to assess the advantages of advanced technology systems compared to those systems commercially available today. Advanced systems studied include steam turbines, open and closed cycle gas turbines, combined cycles, diesel engines, Stirling engines, phosphoric acid and molten carbonate fuel cells and thermionics. Steam turbines, open cycle gas turbines, combined cycles, and diesel engines were also analyzed in versions typical of today's commercially available technology to provide a base against which to measure the advanced systems. Cogeneration applications in the major energy consuming manufacturing industries were considered. Results of the study in terms of plant level energy savings, annual energy cost savings and economic attractiveness are presented for the various energy conversion systems considered.

  3. Projects in Technology Education and Fostering Learning: The Potential and Its Realization

    Science.gov (United States)

    Barak, Moshe; Shachar, Ahron

    2008-06-01

    The current study aimed at examining the efficacy of technological projects as learning tools by exploring the following questions: the extent to which projects in technology develop students as independent learners; the types of knowledge the students deal with in working on their projects; the role of problem-solving in technological projects; and how projects integrate into traditional schooling. The subjects were 53 high school (12th grade) students who prepared graduating projects in technology under the supervision of nine teachers. Data were collected by observing the students in the laboratory, administrating two questionnaires to both the students and the teachers, and analyzing 25 portfolios prepared by the students of their projects. The findings indicate that projects in technology provide a good opportunity to engage students in challenging tasks that enhance their learning skills. To maximize this potential, it is necessary to employ the project method from the early stages of learning technology. It is especially important that teachers having a strong engineering orientation also acquire pedagogical knowledge on issues such as fostering independent learning, creativity, peer learning and reflective practice in the technological classroom.

  4. Project-based learning as a facilitator to promote students’ technology competencies

    Directory of Open Access Journals (Sweden)

    Mohsen Bagheri

    2013-04-01

    Full Text Available Due to the close relationship between educational technology as a field of study on the one hand and technological progress as a fact on the other, the very nature of this field has undergone tremendous shift which has resulted in a transmogrification, changes which are evinced by the roles of educational technologist. Therefore, not only should educational technology training centers aim at transferring concepts related to this major to learners, but they should also focus on developing basic skills that students need, such as technological competencies.This article sought to examine the effects of project-based learning strategy (PoBL on students’ technology competency in a system-based education course offered in the educational technology department of Arak University in Iran. In order to achieve this end, a sample of 78 students majoring in the field of educational technology who enrolled in the system-based education course was selected. Subjects were randomly assigned to one of two groups: the experimental group (PoBL strategy and the control group (conventional teaching strategy. The educational course involved 12 sessions over the course of one semester of the 2011-2012 academic year, with each session lasting approximately 90 minutes. The technology competency questionnaire was administrated three times (i.e. pretest, post-test one, and post-test two, while the experimental group received the PoBL strategy and the control group was exposed to conventional teaching (CT methods. The results of two way repeated measure ANOVA revealed that students who were taught using Poll strategy performed better in terms of technology competency compared to students who were taught using CT strategy.

  5. In Situ Site Characterization Technologies Demonstrated at the INEEL in Decommissioning Projects

    Energy Technology Data Exchange (ETDEWEB)

    Wright, Kelly Clyde; Meservey, Richard Harlan; Whitmill, Larry Joseph

    1999-04-01

    The United States Department of Energy (DOE)continually seeks safer, more cost-effective, and better performing technologies for decontamination and decommissioning (D&D) of nuclear facilities. The Deactivation and Decommissioning Focus Area (DDFA) of the DOE Federal Energy Technology Center (FETC) sponsors Large Scale Demonstration and Deployment Projects (LSDDPs) which are conducted at various DOE sites. The Idaho National Engineering and Environmental Laboratory (INEEL) is one of the DOE sites for demonstration of these newa and improved technologies. The INEEL needs statement defines specific needs or problems for their D&D program. One of the needs identified at the INEEL was for new or improved site characterization technologies. A variety of in-situ site characterization technologies have been demonstrated through the INEEL LSDDP. These technologies provide a safer means of characterization, improved documentation, real-time information, improved D&D schedules, and reduction in costs and radiation exposures to workers. These technologies have provided vast improvements to the D&D site characterizations. Some of these technologies include: • The Global Positioning Radiometric Scanner System for large-area, surface gamma radiation surveys • Remote underwater characterization system• Identifying heavy metals in painted surfaces and determining the alloy composition in metallic material • In-Situ Object Counting System for free release • Real-time radiological data acquisition with the Surveillance and Measurement’s sodium iodide detector • Electromagnetic radiography to locate contaminated soils. Historically, site characterization has been a slow, costly, and tedious process. However, through these demonstrations, new technologies have provided more accurate data, real-time information, and enhanced site characterization documentation. In addition, a safer work environment has been established as a result of decreasing the worker’s time

  6. Teaching Engineering Statistics with Technology, Group Learning, Contextual Projects, Simulation Models and Student Presentations

    Science.gov (United States)

    Romeu, Jorge Luis

    2008-01-01

    This article discusses our teaching approach in graduate level Engineering Statistics. It is based on the use of modern technology, learning groups, contextual projects, simulation models, and statistical and simulation software to entice student motivation. The use of technology to facilitate group projects and presentations, and to generate,…

  7. The AECT HistoryMakers Project: Conversations with Leaders in Educational Technology

    Science.gov (United States)

    Lockee, Barbara B.; Song, Kibong; Li, Wei

    2014-01-01

    The early beginnings and evolution of the field of educational technology (ET) have been documented by various scholars in the field. Recently, another form of historical documentation has been undertaken through a project of the Association for Educational Communications and Technology (AECT). The AECT HistoryMakers Project is a collaborative…

  8. Teaching Engineering Statistics with Technology, Group Learning, Contextual Projects, Simulation Models and Student Presentations

    Science.gov (United States)

    Romeu, Jorge Luis

    2008-01-01

    This article discusses our teaching approach in graduate level Engineering Statistics. It is based on the use of modern technology, learning groups, contextual projects, simulation models, and statistical and simulation software to entice student motivation. The use of technology to facilitate group projects and presentations, and to generate,…

  9. An Examination of the Determinants of Top Management Support of Information Technology Projects

    Science.gov (United States)

    Mahoney, Michael L.

    2011-01-01

    Despite compelling evidence that top management support promotes information technology project success, existing research fails to offer insight into the antecedents of top management support of such projects. This gap in the literature is significant since the exploitation of information technology offers organizations unique opportunities for…

  10. Financing Projects That Use Clean-Energy Technologies. An Overview of Barriers and Opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Goldman, D. P. [New Energy Capital, LLC, Hanover, NH (United States); McKenna, J. J. [Hamilton Clark & Co., Washington, DC (United States); Murphy, L. M. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2005-10-01

    This technical paper describes the importance of project financing for clean-energy technology deployment. It describes the key challenges in financing clean-energy technology projects, including technical risks, credit worthiness risk, revenue security risk, market competition, scale and related cost, as well as first-steps to overcome those barriers.

  11. Minimal Technologies Application Project, Hohenfels Training Area, Germany: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Zellmer, S.D.; Hinchman, R.R.; Johnson, D.O. [Argonne National Lab., IL (United States). Energy Systems Div.; Severinghaus, W.D. [Corps of Engineers, Champaign, IL (United States); Brent, J.J. [Army Construction Engineering Research Lab., Champaign, IL (United States)

    1991-12-01

    At the US Army Hohenfels Training Area in Germany, more than 30 years of continuous and intensive tactical training has caused extensive environmental damage because of the loss of vegetative cover and accelerated soil erosion. A project was conducted to evaluate the cost-effectiveness and relative benefits of various revegetation procedures. These procedures involved amendment and seedbed preparation options that were combined with three different durations of site closure. The point-intercept method was used to measure the types and amounts of vegetation established and changes in the vegetative community. Over three growing seasons, applications of fertilizer and seed increased the percent grass, legume, and total vegetative cover. The duration of site closure had no influence on the types or amounts of ground cover established. Materials made up only 10% of the total cost of the fertilization and seeding operations. The results of the research indicate that less expensive methods of amendment application should be evaluated. The data also show that site closure is not practical, economical, or necessary. The results of this project suggest that a regular maintenance program consisting of seeding and fertilization is required to maintain adequate vegetative cover and control erosion on tactical training areas.

  12. A research project to develop and evaluate a technical education component on materials technology for orientation to space-age technology

    Science.gov (United States)

    Jacobs, J. A.

    1976-01-01

    A project was initiated to develop, implement, and evaluate a prototype component for self-pacing, individualized instruction on basic materials science. Results of this project indicate that systematically developed, self-paced instruction provides an effective means for orienting nontraditional college students and secondary students, especially minorities, to both engineering technology and basic materials science. In addition, students using such a system gain greater chances for mastering subject matter than with conventional modes of instruction.

  13. Next Generation Life Support Project: Development of Advanced Technologies for Human Exploration Missions

    Science.gov (United States)

    Barta, Daniel J.

    2012-01-01

    Next Generation Life Support (NGLS) is one of several technology development projects sponsored by the National Aeronautics and Space Administration s Game Changing Development Program. NGLS is developing life support technologies (including water recovery, and space suit life support technologies) needed for humans to live and work productively in space. NGLS has three project tasks: Variable Oxygen Regulator (VOR), Rapid Cycle Amine (RCA) swing bed, and Alternative Water Processing. The selected technologies within each of these areas are focused on increasing affordability, reliability, and vehicle self sufficiency while decreasing mass and enabling long duration exploration. The RCA and VOR tasks are directed at key technology needs for the Portable Life Support System (PLSS) for an Exploration Extravehicular Mobility Unit (EMU), with focus on prototyping and integrated testing. The focus of the Rapid Cycle Amine (RCA) swing-bed ventilation task is to provide integrated carbon dioxide removal and humidity control that can be regenerated in real time during an EVA. The Variable Oxygen Regulator technology will significantly increase the number of pressure settings available to the space suit. Current spacesuit pressure regulators are limited to only two settings while the adjustability of the advanced regulator will be nearly continuous. The Alternative Water Processor efforts will result in the development of a system capable of recycling wastewater from sources expected in future exploration missions, including hygiene and laundry water, based on natural biological processes and membrane-based post treatment. The technologies will support a capability-driven architecture for extending human presence beyond low Earth orbit to potential destinations such as the Moon, near Earth asteroids and Mars.

  14. Real Time Technology Application Demonstration Project Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Volpe, John [Univ of KY, Center for Applied Energy Research, Kentucky Research Consortium for Energy and Environment; Hampson, Steve [Univ of KY, Center for Applied Energy Research, Kentucky Research Consortium for Energy and Environment; Johnson, Robert L [Argonne National Lab, Environmental Science Div.

    2008-09-01

    The work and results described in this final report pertain to the demonstration of real-time characterization technologies applied to potentially contaminated surface soils in and around Area of Concern (AOC) 492 at the Paducah Gaseous Diffusion Plant (PGDP). The work was conducted under the auspices of Kentucky Research Consortium for Energy and Environment (KRCEE). KRCEE was created to support the Department of Energy's (DOE) efforts to complete the expeditious and economically viable environmental restoration of the Paducah Gaseous Diffusion Plant (PGDP), the Western Kentucky Wildlife Management Area (WKWMA), and surrounding areas.

  15. Including information technology project management in the nursing informatics curriculum.

    Science.gov (United States)

    Sockolow, Paulina; Bowles, Kathryn H

    2008-01-01

    Project management is a critical skill for nurse informaticists who are in prominent roles developing and implementing clinical information systems. It should be included in the nursing informatics curriculum, as evidenced by its inclusion in informatics competencies and surveys of important skills for informaticists. The University of Pennsylvania School of Nursing includes project management in two of the four courses in the master's level informatics minor. Course content includes the phases of the project management process; the iterative unified process methodology; and related systems analysis and project management skills. During the introductory course, students learn about the project plan, requirements development, project feasibility, and executive summary documents. In the capstone course, students apply the system development life cycle and project management skills during precepted informatics projects. During this in situ experience, students learn, the preceptors benefit, and the institution better prepares its students for the real world.

  16. Modeling Projects in E-Learning Course: A Case of an Information Technology Project

    Directory of Open Access Journals (Sweden)

    Mohammed G. Belkasmi

    2010-01-01

    Full Text Available Problem statement: Achieving projects is primordial in the process of teaching in several disciplines, particularly software engineering courses. However, proposing this learning activity in a context of e-learning is not automatically guaranteed by the current platforms, even unsupported by the existing standards for creating educational content. Approach: Through this study, starting from the model developed in the “XESOP-Jaxe” project to represent the contents of an e-learning course, we tried to propose an improvement in order to formalize a project for learners as a learning object. Results: We grafted our model, formalized in XML Schema, to the “XESOP-Jaxe” schema of the course. Thus, to the elements that could constitute a course, comes a new element called “projet” (project. Conclusion: This model was built and tested within the “XESOP-Jaxe” platform whose goal is to provide an effective solution for creating educational content in compliance with existing standards.

  17. Results-Based Organization Design for Technology Entrepreneurs

    Directory of Open Access Journals (Sweden)

    Chris McPhee

    2012-05-01

    Full Text Available Faced with considerable uncertainty, entrepreneurs would benefit from clearly defined objectives, a plan to achieve these objectives (including a reasonable expectation that this plan will work, as well as a means to measure progress and make requisite course corrections. In this article, the author combines the benefits of results-based management with the benefits of organization design to describe a practical approach that technology entrepreneurs can use to design their organizations so that they deliver desired outcomes. This approach links insights from theory and practice, builds logical connections between entrepreneurial activities and desired outcomes, and measures progress toward those outcomes. This approach also provides a mechanism for entrepreneurs to make continual adjustments and improvements to their design and direction in response to data, customer and stakeholder feedback, and changes in their business environment.

  18. Project Responder: technology needs for local emergency response

    Science.gov (United States)

    Beakley, Guy; Garwin, Thomas; Pollard, Neal A.; Singley, George T., III; Tuohy, Robert V.; Lupo, Jasper

    2003-09-01

    Since April 2001, the Oklahoma City National Memorial Institute for the Prevention of Terrorism has funded an effort by Hicks &Associates, Inc. and the Terrorism Research Center, Inc., aimed ultimately at improving local, state, and federal emergency responders" capabilities for mitigating the effects of chemical, biological, radiological, nuclear or explosive/ incendiary (CBRNE) terrorism. This effort, titled "Project Responder," began by developing an understanding of how state and local responders view their current capabilities, shortfalls, and needs. This paper discusses some of the results of this first phase of the effort that has resulted in a comprehensive report titled "Emergency Responders" Needs, Goals, and Priorities." This paper addresses two of the capabilities from that report which we believe are of most interest to this conference. There are ten other capabilities discussed in the report, which may also be of interest.

  19. Fiscal 1996 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials; 1996 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Technologies were described of creating original high-functional materials. The paper presented the following two as fields of technology on which importance is to be placed for the future R and D from technological and socioeconomic points of view. In the field of new materials of living organism imitation type, remarkably high-performance/high-functional new materials are invented by imitating the precise function manifestation mechanism of the ultimate living organism in which a great variety of matters are in harmony with each other and manifest complicated and high-level functions. In the field of structural control/synthesis process technology, the paper is aimed at manifestation of newer and higher functions/performance and innovation of the synthesis process, and also at developing technology to precisely control structure and process of materials including surface and interface in correspondence with atomic/molecular to macro levels. Up to the present, conducted were an examination of autonomous response materials (the subtheme is a R and D of polymer/composite multi-stimuli-responsive materials) and a R and D of precise polymerization (control) polymer materials. 239 refs., 129 figs., 49 tabs.

  20. Measuring Student Career Interest within the Context of Technology-Enhanced STEM Projects: A Cross-Project Comparison Study Based on the Career Interest Questionnaire

    Science.gov (United States)

    Peterman, Karen; Kermish-Allen, Ruth; Knezek, Gerald; Christensen, Rhonda; Tyler-Wood, Tandra

    2016-03-01

    This article describes Energy for ME and Going Green! Middle Schoolers Out to Save the World, two Science, Technology, Engineering, and Mathematics (STEM) education programs with the common goal of improving students' attitudes about scientific careers. The authors represent two project teams, each with funding from the National Science Foundation's ITEST program. Using different approaches and technology, both projects challenged students to use electricity monitoring system data to create action plans for conserving energy in their homes and communities. The impact of each project on students' career interests was assessed via a multi-method evaluation that included the Career Interest Questionnaire (CIQ), a measure that was validated within the context of ITEST projects and has since become one of the instruments used most commonly across the ITEST community. This article explores the extent to which the CIQ can be used to document the effects of technology-enhanced STEM educational experiences on students' career attitudes and intentions in different environments. The results indicate that the CIQ, and the Intent subscale in particular, served as significant predictors of students' self-reported STEM career aspirations across project context. Results from each project also demonstrated content gains by students and demonstrated the impact of project participation and gender on student outcomes. The authors conclude that the CIQ is a useful tool for providing empirical evidence to document the impact of technology-enhanced science education programs, particularly with regard to Intent to purse a STEM career. The need for additional cross-project comparison studies is also discussed.

  1. Measuring Student Career Interest within the Context of Technology-Enhanced STEM Projects: A Cross-Project Comparison Study Based on the Career Interest Questionnaire

    Science.gov (United States)

    Peterman, Karen; Kermish-Allen, Ruth; Knezek, Gerald; Christensen, Rhonda; Tyler-Wood, Tandra

    2016-12-01

    This article describes Energy for ME and Going Green! Middle Schoolers Out to Save the World, two Science, Technology, Engineering, and Mathematics (STEM) education programs with the common goal of improving students' attitudes about scientific careers. The authors represent two project teams, each with funding from the National Science Foundation's ITEST program. Using different approaches and technology, both projects challenged students to use electricity monitoring system data to create action plans for conserving energy in their homes and communities. The impact of each project on students' career interests was assessed via a multi-method evaluation that included the Career Interest Questionnaire (CIQ), a measure that was validated within the context of ITEST projects and has since become one of the instruments used most commonly across the ITEST community. This article explores the extent to which the CIQ can be used to document the effects of technology-enhanced STEM educational experiences on students' career attitudes and intentions in different environments. The results indicate that the CIQ, and the Intent subscale in particular, served as significant predictors of students' self-reported STEM career aspirations across project context. Results from each project also demonstrated content gains by students and demonstrated the impact of project participation and gender on student outcomes. The authors conclude that the CIQ is a useful tool for providing empirical evidence to document the impact of technology-enhanced science education programs, particularly with regard to Intent to purse a STEM career. The need for additional cross-project comparison studies is also discussed.

  2. New technologies for DNA analysis – a review of the READNA Project

    NARCIS (Netherlands)

    McGinn, Steven; Bauer, David; Brefort, Thomas; Dong, Liqin; El-Sagheer, Afaf; Elsharawy, Abdou; Evans, Geraint; Falk-Sörqvist, Elin; Forster, Michael; Fredriksson, Simon; Freeman, Peter; Freitag, Camilla; Fritzsche, Joachim; Gibson, Spencer; Gullberg, Mats; Gut, Marta; Heath, Simon; Heath-Brun, Isabelle; Heron, Andrew J.; Hohlbein, Johannes; Ke, Rongqin; Lancaster, Owen; Reste, Le Ludovic; Maglia, Giovanni; Marie, Rodolphe; Mauger, Florence; Mertes, Florian; Mignardi, Marco; Moens, Lotte; Oostmeijer, Jelle; Out, Ruud; Pedersen, Jonas Nyvold; Persson, Fredrik; Picaud, Vincent; Rotem, Dvir; Schracke, Nadine; Sengenes, Jennifer; Stähler, Peer F.; Stade, Björn; Stoddart, David; Teng, Xia; Veal, Colin D.; Zahra, Nathalie; Bayley, Hagan; Beier, Markus; Brown, Tom; Dekker, Cees; Ekström, Björn; Flyvbjerg, Henrik; Franke, Andre; Guenther, Simone; Kapanidis, Achillefs N.; Kaye, Jane; Kristensen, Anders; Lehrach, Hans; Mangion, Jonathan; Sauer, Sascha; Schyns, Emile; Tost, Jörg; Helvoort, van Joop M.L.M.; Zaag, van der Pieter J.; Tegenfeldt, Jonas O.; Brookes, Anthony J.; Mir, Kalim; Nilsson, Mats; Willcocks, James P.; Gut, Ivo G.

    2016-01-01

    The REvolutionary Approaches and Devices for Nucleic Acid analysis (READNA) project received funding from the European Commission for 4 1/2 years. The objectives of the project revolved around technological developments in nucleic acid analysis. The project partners have discovered, created and deve

  3. New Technologies for DNA analysis-A review of the READNA Project

    NARCIS (Netherlands)

    McGinn, Steven; Bauer, David; Brefort, Thomas; Dong, Liqin; El-Sagheer, Afaf; Elsharawy, Abdou; Evans, Geraint; Falk-Sörqvist, Elin; Forster, Michael; Fredriksson, Simon; Freeman, Peter; Freitag, Camilla; Fritzsche, Joachim; Gibson, Spencer; Gullberg, Mats; Gut, Marta; Heath, Simon; Heath-Brun, Isabelle; Heron, Andrew J; Hohlbein, Johannes; Ke, Rongqin; Lancaster, Owen; Le Reste, Ludovic; Maglia, Giovanni; Marie, Rodolphe; Mauger, Florence; Mertes, Florian; Mignardi, Marco; Moens, Lotte; Oostmeijer, Jelle; Out, Ruud; Pedersen, Jonas Nyvold; Persson, Fredrik; Picaud, Vincent; Rotem, Dvir; Schracke, Nadine; Sengenes, Jennifer; Stähler, Peer F; Stade, Björn; Stoddart, David; Teng, Xia; Veal, Colin D; Zahra, Nathalie; Bayley, Hagan; Beier, Markus; Brown, Tom; Dekker, Cees; Ekström, Björn; Flyvbjerg, Henrik; Franke, Andre; Guenther, Simone; Kapanidis, Achillefs N; Kaye, Jane; Kristensen, Anders; Lehrach, Hans; Mangion, Jonathan; Sauer, Sascha; Schyns, Emile; Tost, Jörg; van Helvoort, Joop M L M; van der Zaag, Pieter J; Tegenfeldt, Jonas O; Brookes, Anthony J; Mir, Kalim; Nilsson, Mats; Willcocks, Spike; Gut, Ivo G

    2016-01-01

    The REvolutionary Approaches and Devices for Nucleic Acid analysis (READNA) project received funding from the European Commission for 4 1/2 years. The objectives of the project revolved around technological developments in nucleic acid analysis. The project partners have discovered, created and deve

  4. Technological and regulatory aspects of quality management during the life cycle of investment and construction projects

    OpenAIRE

    Kropyvko Serhii Maksymovych

    2016-01-01

    The division of the life cycle of investment and construction projects in four phases, based on their technological features, is proposed in the article. Regulatory aspects of quality management during each phase of the life cycle of investment and construction projects are analyzed. The model of quality management during the phases of the life cycle of investment and construction project is developed.

  5. Success Rates by Software Development Methodology in Information Technology Project Management: A Quantitative Analysis

    Science.gov (United States)

    Wright, Gerald P.

    2013-01-01

    Despite over half a century of Project Management research, project success rates are still too low. Organizations spend a tremendous amount of valuable resources on Information Technology projects and seek to maximize the utility gained from their efforts. The author investigated the impact of software development methodology choice on ten…

  6. Harnessing the Power of Technologies to Manage Collaborative e-Learning Projects in Dispersed Environments

    Science.gov (United States)

    Gosper, Maree Veroncia; McNeill, Margot Anne; Woo, Karen

    2010-01-01

    "The impact of web-based lecture technologies on current and future practice in learning and teaching" was a collaborative project across four Australian universities, funded by the Australian Learning and Teaching Council (ALTC). The project was both exploratory and developmental in nature and according to the project's external…

  7. New Technologies for DNA analysis-A review of the READNA Project

    NARCIS (Netherlands)

    McGinn, Steven; Bauer, David; Brefort, Thomas; Dong, Liqin; El-Sagheer, Afaf; Elsharawy, Abdou; Evans, Geraint; Falk-Sörqvist, Elin; Forster, Michael; Fredriksson, Simon; Freeman, Peter; Freitag, Camilla; Fritzsche, Joachim; Gibson, Spencer; Gullberg, Mats; Gut, Marta; Heath, Simon; Heath-Brun, Isabelle; Heron, Andrew J; Hohlbein, Johannes; Ke, Rongqin; Lancaster, Owen; Le Reste, Ludovic; Maglia, Giovanni; Marie, Rodolphe; Mauger, Florence; Mertes, Florian; Mignardi, Marco; Moens, Lotte; Oostmeijer, Jelle; Out, Ruud; Pedersen, Jonas Nyvold; Persson, Fredrik; Picaud, Vincent; Rotem, Dvir; Schracke, Nadine; Sengenes, Jennifer; Stähler, Peer F; Stade, Björn; Stoddart, David; Teng, Xia; Veal, Colin D; Zahra, Nathalie; Bayley, Hagan; Beier, Markus; Brown, Tom; Dekker, Cees; Ekström, Björn; Flyvbjerg, Henrik; Franke, Andre; Guenther, Simone; Kapanidis, Achillefs N; Kaye, Jane; Kristensen, Anders; Lehrach, Hans; Mangion, Jonathan; Sauer, Sascha; Schyns, Emile; Tost, Jörg; van Helvoort, Joop M L M; van der Zaag, Pieter J; Tegenfeldt, Jonas O; Brookes, Anthony J; Mir, Kalim; Nilsson, Mats; Willcocks, Spike; Gut, Ivo G

    2016-01-01

    The REvolutionary Approaches and Devices for Nucleic Acid analysis (READNA) project received funding from the European Commission for 4 1/2 years. The objectives of the project revolved around technological developments in nucleic acid analysis. The project partners have discovered, created and deve

  8. New technologies for DNA analysis – a review of the READNA Project

    NARCIS (Netherlands)

    McGinn, Steven; Bauer, David; Brefort, Thomas; Dong, Liqin; El-Sagheer, Afaf; Elsharawy, Abdou; Evans, Geraint; Falk-Sörqvist, Elin; Forster, Michael; Fredriksson, Simon; Freeman, Peter; Freitag, Camilla; Fritzsche, Joachim; Gibson, Spencer; Gullberg, Mats; Gut, Marta; Heath, Simon; Heath-Brun, Isabelle; Heron, Andrew J.; Hohlbein, Johannes; Ke, Rongqin; Lancaster, Owen; Reste, Le Ludovic; Maglia, Giovanni; Marie, Rodolphe; Mauger, Florence; Mertes, Florian; Mignardi, Marco; Moens, Lotte; Oostmeijer, Jelle; Out, Ruud; Pedersen, Jonas Nyvold; Persson, Fredrik; Picaud, Vincent; Rotem, Dvir; Schracke, Nadine; Sengenes, Jennifer; Stähler, Peer F.; Stade, Björn; Stoddart, David; Teng, Xia; Veal, Colin D.; Zahra, Nathalie; Bayley, Hagan; Beier, Markus; Brown, Tom; Dekker, Cees; Ekström, Björn; Flyvbjerg, Henrik; Franke, Andre; Guenther, Simone; Kapanidis, Achillefs N.; Kaye, Jane; Kristensen, Anders; Lehrach, Hans; Mangion, Jonathan; Sauer, Sascha; Schyns, Emile; Tost, Jörg; Helvoort, van Joop M.L.M.; Zaag, van der Pieter J.; Tegenfeldt, Jonas O.; Brookes, Anthony J.; Mir, Kalim; Nilsson, Mats; Willcocks, James P.; Gut, Ivo G.

    2016-01-01

    The REvolutionary Approaches and Devices for Nucleic Acid analysis (READNA) project received funding from the European Commission for 4 1/2 years. The objectives of the project revolved around technological developments in nucleic acid analysis. The project partners have discovered, created and deve

  9. Success Rates by Software Development Methodology in Information Technology Project Management: A Quantitative Analysis

    Science.gov (United States)

    Wright, Gerald P.

    2013-01-01

    Despite over half a century of Project Management research, project success rates are still too low. Organizations spend a tremendous amount of valuable resources on Information Technology projects and seek to maximize the utility gained from their efforts. The author investigated the impact of software development methodology choice on ten…

  10. Electric Ground Support Equipment Advanced Battery Technology Demonstration Project at the Ontario Airport

    Energy Technology Data Exchange (ETDEWEB)

    Tyler Gray; Jeremy Diez; Jeffrey Wishart; James Francfort

    2013-07-01

    The intent of the electric Ground Support Equipment (eGSE) demonstration is to evaluate the day-to-day vehicle performance of electric baggage tractors using two advanced battery technologies to demonstrate possible replacements for the flooded lead-acid (FLA) batteries utilized throughout the industry. These advanced battery technologies have the potential to resolve barriers to the widespread adoption of eGSE deployment. Validation testing had not previously been performed within fleet operations to determine if the performance of current advanced batteries is sufficient to withstand the duty cycle of electric baggage tractors. This report summarizes the work performed and data accumulated during this demonstration in an effort to validate the capabilities of advanced battery technologies. This report summarizes the work performed and data accumulated during this demonstration in an effort to validate the capabilities of advanced battery technologies. The demonstration project also grew the relationship with Southwest Airlines (SWA), our demonstration partner at Ontario International Airport (ONT), located in Ontario, California. The results of this study have encouraged a proposal for a future demonstration project with SWA.

  11. A configuration space toolkit for automated spatial reasoning: Technical results and LDRD project final report

    Energy Technology Data Exchange (ETDEWEB)

    Xavier, P.G.; LaFarge, R.A.

    1997-02-01

    A robot`s configuration space (c-space) is the space of its kinematic degrees of freedom, e.g., the joint-space of an arm. Sets in c-space can be defined that characterize a variety of spatial relationships, such as contact between the robot and its environment. C-space techniques have been fundamental to research progress in areas such as motion planning and physically-based reasoning. However, practical progress has been slowed by the difficulty of implementing the c-space abstraction inside each application. For this reason, we proposed a Configuration Space Toolkit of high-performance algorithms and data structures meeting these needs. Our intent was to develop this robotics software to provide enabling technology to emerging applications that apply the c-space abstraction, such as advanced motion planning, teleoperation supervision, mechanism functional analysis, and design tools. This final report presents the research results and technical achievements of this LDRD project. Key results and achievements included (1) a hybrid Common LISP/C prototype that implements the basic C-Space abstraction, (2) a new, generic, algorithm for constructing hierarchical geometric representations, and (3) a C++ implementation of an algorithm for fast distance computation, interference detection, and c-space point-classification. Since the project conclusion, motion planning researchers in Sandia`s Intelligent Systems and Robotics Center have been using the CSTk libcstk.so C++ library. The code continues to be used, supported, and improved by projects in the ISRC.

  12. Progress update of NASA's free-piston Stirling space power converter technology project

    Science.gov (United States)

    Dudenhoefer, James E.; Winter, Jerry M.; Alger, Donald

    1992-01-01

    A progress update is presented of the NASA LeRC Free-Piston Stirling Space Power Converter Technology Project. This work is being conducted under NASA's Civil Space Technology Initiative (CSTI). The goal of the CSTI High Capacity Power Element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA space initiatives. Efforts are focused upon increasing system power output and system thermal and electric energy conversion efficiency at least five fold over current SP-100 technology, and on achieving systems that are compatible with space nuclear reactors. This paper will discuss progress toward 1050 K Stirling Space Power Converters. Fabrication is nearly completed for the 1050 K Component Test Power Converter (CTPC); results of motoring tests of the cold end (525 K), are presented. The success of these and future designs is dependent upon supporting research and technology efforts including heat pipes, bearings, superalloy joining technologies, high efficiency alternators, life and reliability testing, and predictive methodologies. This paper will compare progress in significant areas of component development from the start of the program with the Space Power Development Engine (SPDE) to the present work on CTPC.

  13. Keynote presentation: Project Management, Technology and Evolving Work Processes

    DEFF Research Database (Denmark)

    Kampf, Constance Elizabeth

    Bridging the classroom and workplace is a challenge in the Project Management classroom because students rarely have the opportunity or the experience needed to head up large projects. So how can instructors present the opportunity to develop skills and gain experience needed to understand project...... management in a classroom setting? To begin to answer this question, the presentation describes three key strategies used in a Project Management course developed from a communications perspective in the International Bachelor Program in Marketing and Management Communication, Business & Social Sciences......, Aarhus University. First, this Project Management course involves continual, ongoing development through working with real clients. To learn about project management from a communications perspective, learners were asked to work in teams for project conception and planning. To communicate with the client...

  14. Report on the planning workshop on cost-effective ceramic machining. Ceramic Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Blau, P.J.

    1991-11-01

    A workshop on ``Cost Effective Ceramic Machining`` (CECM) was held at Oak Ridge Associated Universities Pollard Auditorium, Oak Ridge, Tennessee, May 1991. The purpose of this workshop was to present a preliminary project plan for industry critique and to identify specific components and cost-reduction targets for a new project on Cost Effective Ceramic Machining. The CECM project is an extension of the work on the Ceramic Technology for Advanced Heat Engines (CTAHE) Program sponsored by the Department of Energy, Office of Transportation Materials. The workshop consisted of fifteen invited papers, discussions, a survey of the attendee`s opinions, and a tour of the High Temperature Materials Laboratory at ORNL. The total number of registrants was sixty-seven, including thirty-three from industry or private sector organizations, seven from universities, three from industry groups, fourteen from DOE laboratories (including ORNL, Y-12, and Lawrence Livermore Laboratory), three from trade associations, and three from other government organizations. Forty- one survey forms, which critiqued the proposed project plan, were completed by attendees, and the results are presented in this report. Valves, cam roller followers, water pump seals, and diesel engine head plates were rated highest fro application of ceramic machining concepts to reduce cost. Coarse grinding, abrasives and wheel technology, and fine grinding were most highly rated as regards their impact on cost reduction. Specific cost-reduction targets for given parts varied greatly in the survey results and were not felt to be useful for the purposes for the CECM plan development. A range of individual comments were obtained and are listed in an appendix. As a result of the workshop and subsequent discussions, a modified project plan, different in certain aspects from the original CECM plan, has been developed.

  15. Vehicle technologies program Government Performance and Results Act (GPA) report for fiscal year 2012

    Energy Technology Data Exchange (ETDEWEB)

    Ward, J.; Stephens, T. S.; Birky, A. K. (Energy Systems); (DOE-EERE); (TA Engineering)

    2012-08-10

    The U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy has defined milestones for its Vehicle Technologies Program (VTP). This report provides estimates of the benefits that would accrue from achieving these milestones relative to a base case that represents a future in which there is no VTP-supported vehicle technology development. Improvements in the fuel economy and reductions in the cost of light- and heavy-duty vehicles were estimated by using Argonne National Laboratory's Autonomie powertrain simulation software and doing some additional analysis. Argonne also estimated the fraction of the fuel economy improvements that were attributable to VTP-supported development in four 'subsystem' technology areas: batteries and electric drives, advanced combustion engines, fuels and lubricants, and materials (i.e., reducing vehicle mass, called 'lightweighting'). Oak Ridge National Laboratory's MA{sup 3}T (Market Acceptance of Advanced Automotive Technologies) tool was used to project the market penetration of light-duty vehicles, and TA Engineering's TRUCK tool was used to project the penetrations of medium- and heavy-duty trucks. Argonne's VISION transportation energy accounting model was used to estimate total fuel savings, reductions in primary energy consumption, and reductions in greenhouse gas emissions that would result from achieving VTP milestones. These projections indicate that by 2030, the on-road fuel economy of both light- and heavy-duty vehicles would improve by more than 20%, and that this positive impact would be accompanied by a reduction in oil consumption of nearly 2 million barrels per day and a reduction in greenhouse gas emissions of more than 300 million metric tons of CO{sub 2} equivalent per year. These benefits would have a significant economic value in the U.S. transportation sector and reduce its dependency on oil and its vulnerability to oil price shocks.

  16. Novel High Pressure Pump-on-a-Chip Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — HJ Science & Technology, Inc proposes to develop a novel high pressure "pump-on-a-chip" and "valve-on-a-chip" microfluidic technology for NASA planetary science...

  17. Enabling Technologies for Fabrication of Large Area Flexible Antennas Project

    Data.gov (United States)

    National Aeronautics and Space Administration — MesoScribe Technologies, a high tech start-up from SUNY-Stony Brook, proposes to apply a breakthrough new direct writing technology to meet the objectives set-forth...

  18. Novel High Pressure Pump-on-a-Chip Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — HJ Science & Technology, Inc. proposes to develop a novel high pressure "pump-on-a-chip" (HPPOC) technology capable of generating high pressure and flow rate on...

  19. Fission Surface Power Technology Demonstration Unit Test Results

    Science.gov (United States)

    Briggs, Maxwell H.; Gibson, Marc A.; Geng, Steven M.; Sanzi, James L.

    2016-01-01

    The Fission Surface Power (FSP) Technology Demonstration Unit (TDU) is a system-level demonstration of fission power technology intended for use on manned missions to Mars. The Baseline FSP systems consists of a 190 kWt UO2 fast-spectrum reactor cooled by a primary pumped liquid metal loop. This liquid metal loop transfers heat to two intermediate liquid metal loops designed to isolate fission products in the primary loop from the balance of plant. The intermediate liquid metal loops transfer heat to four Stirling Power Conversion Units (PCU), each of which produce 12 kWe (48 kW total) and reject waste heat to two pumped water loops, which transfer the waste heat to titanium-water heat pipe radiators. The FSP TDU simulates a single leg of the baseline FSP system using an electrically heater core simulator, a single liquid metal loop, a single PCU, and a pumped water loop which rejects the waste heat to a Facility Cooling System (FCS). When operated at the nominal operating conditions (modified for low liquid metal flow) during TDU testing the PCU produced 8.9 kW of power at an efficiency of 21.7 percent resulting in a net system power of 8.1 kW and a system level efficiency of 17.2 percent. The reduction in PCU power from levels seen during electrically heated testing is the result of insufficient heat transfer from the NaK heater head to the Stirling acceptor, which could not be tested at Sunpower prior to delivery to the NASA Glenn Research Center (GRC). The maximum PCU power of 10.4 kW was achieved at the maximum liquid metal temperature of 875 K, minimum water temperature of 350 K, 1.1 kg/s liquid metal flow, 0.39 kg/s water flow, and 15.0 mm amplitude at an efficiency of 23.3 percent. This resulted in a system net power of 9.7 kW and a system efficiency of 18.7 percent.

  20. Fiscal 1997 report on the results of the cooperative research project under consignment from NEDO on technology for simply setting-up of the molding conditions of engineering plastics; 1997 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku (Engineering plastic no seikei joken kan`i settei gijutsu ni kansuru kenkyu kyoryoku jigyo seika hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A cooperative research project was carried out between Japan and Thailand with the aim of developing a system which can simply set up molding conditions using as elements the technology on mold design and injection molding in plastic parts production and the experiment/evaluation technology for making sure of the quality of molded products. In fiscal 1997, based on the basic plan worked out in the previous fiscal year, molding equipment, auxiliary equipment, mold, experimental equipment, injection molding CEA system, etc. were installed at Thailand`s BSID (Bureau of Supporting Industries Development). Supported by equipment manufacturers, the technical guidance was given for operation/maintenance/control of all equipment. At the same time, researchers were sent from Japan, and the joint research was started. Japan received three researchers from BSID for training of molding technology, injection molding CEA program use technology, and experimental evaluation technology. The engineering plastics used for study are polyacetal, polyamide and polycarbonate. 17 refs., 68 figs., 14 tabs.

  1. Comparison of Ice-Bank Actual Results Against Simulated Predicted Results in Carroll Refurbishment Project DKIT

    Directory of Open Access Journals (Sweden)

    Edel Donnelly

    2012-11-01

    Full Text Available This paper reviews the selection methods used in the design of an ice-bank thermal energy storage (TES application in the Carroll’s building in Dundalk IT. The complexities of the interaction between the on- site wind turbine, existing campus load and the refurbished building meant that traditional calculation methods and programmes could not be used and specialist software had to be developed during the design process. The research reviews this tool against the actual results obtained from the operation in the building for one college term of full time use. The paper also examines the operation of the system in order to produce recommendations for its potential modification to improve its efficiency and utilisation. Simulation software is evaluated and maximum import capacity is minimised. Significant budget constraints limited the level of control and metering that could be provided for the project, and this paper demonstrates some investigative processes that were used to overcome the limitations on data availability.

  2. Academic Technology in Higher Education: Organizing for Better Results

    Science.gov (United States)

    Nworie, John

    2007-01-01

    The field of instructional technology has continued to evolve since its inception in the early 1900s. Academic technology units in higher education have witnessed tremendous change in the last one and a half decades. The changes have led to reorganizations, realignments, adoption of innovative administrative structures, increased demands for…

  3. The Carnegie H.A.T. Project--History and Technology.

    Science.gov (United States)

    Laskey, Sue

    1991-01-01

    Describes the History and Technology Project (HAT) at a model technology school. Offers suggestions of suitable hardware and software, and ideas for funding. Emphasizes the goal of integrating technology into all levels of history and social science. Calls for increasing teacher-student interaction and restructuring teaching methods to reach all…

  4. How Undergraduate Students Use Social Media Technologies to Support Group Project Work

    Science.gov (United States)

    McAliney, Peter J.

    2013-01-01

    Technology continues to evolve and become accessible to students in higher education. Concurrently, teamwork has become an important skill in academia and the workplace and students have adopted established technologies to support their learning in both individual and team project work. Given the emergence of social media technologies, I examined…

  5. How Undergraduate Students Use Social Media Technologies to Support Group Project Work

    Science.gov (United States)

    McAliney, Peter J.

    2013-01-01

    Technology continues to evolve and become accessible to students in higher education. Concurrently, teamwork has become an important skill in academia and the workplace and students have adopted established technologies to support their learning in both individual and team project work. Given the emergence of social media technologies, I examined…

  6. Next Slide Please: The Magical, Scientific and Corporate Discourses of Visual Projection Technologies

    Science.gov (United States)

    Eisenhauer, Jennifer F.

    2006-01-01

    This article examines the cultural history of slide projection technologies by focusing upon how such technologies acquire cultural meaning. The meanings acquired by these technologies emerge in areas as diverse as public and domestic entertainment, religion, science, and education. I identify three important discursive shifts impacting the…

  7. Factors influencing the societal acceptance of new energy technologies. Meta-analysis of recent European projects

    Energy Technology Data Exchange (ETDEWEB)

    Poti, B.; Difiore, M. [Consiglio Nazionale delle Ricerche, Rome (Italy); Brohmann, B.; Daniels, A.; Fritsche, U.; Huenecke, K. [Oeko-Institut, Darmstadt (Germany); Heiskanen, E. [National Consumer Research Centre, Helsinki (Finland); Raven, R.P.J.M.; Mourik, R.; Feenstra, C.F.J.; Willemse, R. [ECN Policy Studies, Petten (Netherlands); Hodson, M. [Centre for Sustainable Urban and Regional Futures SURF, University of Salford, Manchester (United Kingdom); Alcantud Torrent, A.; Schaefer, B. [Ecoinstitut Barcelona, Barcelona (Spain); Farkas, B.; Fucsko, J. [Hungarian Environmental Economics Centre MAKK, Budapest (Hungary); Jolivet, E. [IAE Toulouse, Toulouse (France); Maack, M.H.; Matschoss, K. [Icelandic New Energy INE, Reykjavik (Iceland); Oniszk-Poplawska, A. [Institute for Renewable Energy IEO, Warszawa (Poland); Prasad, G. [Energy Research Centre ERC, University of Cape Town, Cape Town (South Africa)

    2008-03-15

    Within this report an analysis is made of 27 case studies of historical and recent new energy technologies in different European regions and South Africa. The analysis focuses on the societal acceptance in these projects in order to identify determinants of success and failure. A wide diversity of technologies is discussed including hydrogen, CO2 capture and storage, biomass, solar and wind energy technologies.

  8. [The BION-M1 project: overview and first results].

    Science.gov (United States)

    Sychev, V N; Ilyin, E A; Yarmanova, E N; Rakov, D V; Ushakov, I B; Kirilin, A N; Orlov, O I; Grigoriev, A I

    2014-01-01

    Biosatellite BION-M1 was launched on April 19 and landed on May 19, 2013. The mission program was largely a continuation of the earlier flown 11 BION projects, FOTON-M2 and FOTON-M3. The biosatellite was inhabited by a great variety of living organisms used for experiments and studies in gravitational physiology, gravitational biology, biotechnology, astrobiology and radiation biology, dosimetry and spectrometry. This was the first time in the history of national biology and physiology when male mice C57bl/6 were chosen for a long-term space experiment focused upon molecular biology investigations. Unfortunately, because of technical failures during the flight a part of the animals were lost. However, the major objectives were attained through reconsideration of biomaterial division among investigators and completion of virtually the total scope of investigations.

  9. The MiMeS Project: First Results

    CERN Document Server

    Grunhut, J H; Bohlender, D A; Bouret, J -C; Henrichs, H; Neiner, C; Petit, V; Louis, N St; Wade, G A; Aurière, M; Kochukhov, O; Silvester, J; ud-Doula, A

    2008-01-01

    Massive stars are those stars with initial masses above about 8 times that of the sun, eventually leading to catastrophic explosions in the form of supernovae. These represent the most massive and luminous stellar component of the Universe, and are the crucibles in which the lion's share of the chemical elements are forged. These rapidly-evolving stars drive the chemistry, structure and evolution of galaxies, dominating the ecology of the Universe - not only as supernovae, but also during their entire lifetimes - with far-reaching consequences. Although the existence of magnetic fields in massive stars is no longer in question, our knowledge of the basic statistical properties of massive star magnetic fields is seriously incomplete. The Magnetism in Massive Stars (MiMeS) Project represents a comprehensive, multidisciplinary strategy by an international team of recognized researchers to address the "big questions" related to the complex and puzzling magnetism of massive stars. This paper present the first resu...

  10. Some asymptotic results on density estimators by wavelet projections

    CERN Document Server

    Varron, Davit

    2012-01-01

    Let $(X_i)_{i\\geq 1}$ be an i.i.d. sample on $\\RRR^d$ having density $f$. Given a real function $\\phi$ on $\\RRR^d$ with finite variation and given an integer valued sequence $(j_n)$, let $\\fn$ denote the estimator of $f$ by wavelet projection based on $\\phi$ and with multiresolution level equal to $j_n$. We provide exact rates of almost sure convergence to 0 of the quantity $\\sup_{x\\in H}\\mid \\fn(x)-\\EEE(\\fn)(x)\\mid$, when $n2^{-dj_n}/\\log n \\rar \\infty$ and $H$ is a given hypercube of $\\RRR^d$. We then show that, if $n2^{-dj_n}/\\log n \\rar c$ for a constant $c>0$, then the quantity $\\sup_{x\\in H}\\mid \\fn(x)-f\\mid$ almost surely fails to converge to 0.

  11. The 150 ns detector project: Prototype preamplifier results

    Science.gov (United States)

    Warburton, W. K.; Russell, S. R.; Kleinfelder, Stuart A.

    1994-08-01

    The long-term goal of the 150 ns detector project is to develop a pixel area detector capable of 6 MHz frame rates (150 ns/frame). Our milestones toward this goal are: a single pixel, 1×256 1D and 8×8 2D detectors, 256×256 2D detectors and, finally, 1024 × 1024 2D detectors. The design strategy is to supply a complete electronics chain (resetting preamp, selectable gain amplifier, analog-to-digital converter (ADC), and memory) for each pixel. In the final detectors these will all be custom integrated circuits. The front-end preamplifiers are integrated first, since their design and performance are the most unusual and also critical to the project's success. Similarly, our early work is concentrated on devising and perfecting detector structures. In this paper we demonstrate the performance of prototypes of our integrated preamplifiers. While the final design will have 64 preamps to a chip, including a switchable gain stage, the prototypes were integrated 8 channels to a "Tiny Chip" and tested in 4 configurations (feedback capacitor Cf equal 2.5 or 4.0 pF, output directly or through a source follower). These devices have been tested thoroughly for reset settling times, gain, linearity, and electronic noise. They generally work as designed, being fast enough to easily integrate detector charge, settle, and reset in 150 ns. Gain and linearity appear to be acceptable. Current values of electronic noise, in double-sampling mode, are about twice the design goal of {2}/{3} of a single photon at 6 keV. We expect this figure to improve with the addition of the onboard amplifier stage and improved packaging. Our next test chip will include these improvements and allow testing with our first detector samples, which will be 1×256 (50 μm wide pixels) and 8×8 (1 mm 2 pixels) element detector on 1 mm thick silicon.

  12. Northwest Open Automated Demand Response Technology Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Kiliccote, Sila; Piette, Mary Ann; Dudley, Junqiao

    2010-03-17

    The Lawrence Berkeley National Laboratory (LBNL) Demand Response Research Center (DRRC) demonstrated and evaluated open automated demand response (OpenADR) communication infrastructure to reduce winter morning and summer afternoon peak electricity demand in commercial buildings the Seattle area. LBNL performed this demonstration for the Bonneville Power Administration (BPA) in the Seattle City Light (SCL) service territory at five sites: Seattle Municipal Tower, Seattle University, McKinstry, and two Target stores. This report describes the process and results of the demonstration. OpenADR is an information exchange model that uses a client-server architecture to automate demand-response (DR) programs. These field tests evaluated the feasibility of deploying fully automated DR during both winter and summer peak periods. DR savings were evaluated for several building systems and control strategies. This project studied DR during hot summer afternoons and cold winter mornings, both periods when electricity demand is typically high. This is the DRRC project team's first experience using automation for year-round DR resources and evaluating the flexibility of commercial buildings end-use loads to participate in DR in dual-peaking climates. The lessons learned contribute to understanding end-use loads that are suitable for dispatch at different times of the year. The project was funded by BPA and SCL. BPA is a U.S. Department of Energy agency headquartered in Portland, Oregon and serving the Pacific Northwest. BPA operates an electricity transmission system and markets wholesale electrical power at cost from federal dams, one non-federal nuclear plant, and other non-federal hydroelectric and wind energy generation facilities. Created by the citizens of Seattle in 1902, SCL is the second-largest municipal utility in America. SCL purchases approximately 40% of its electricity and the majority of its transmission from BPA through a preference contract. SCL also

  13. Ocular Manifestations in Infants Resulted from Assisted Reproductive Technology (ART.

    Directory of Open Access Journals (Sweden)

    Ebrahim Jafarzadehpur

    2013-12-01

    Full Text Available Nowadays, many infertile couples can have child by assistant reproductive technology (ART. Always the undesirable effects of these methods on newborn are considered and are evaluated. The aim of this study is to describe the impact of ART on ocular and visual performances of infants born by these methods.In a cross-sectional descriptive study, 479 infants aged three-nine months presented to an optometry clinic of Child Health and Development Research Department (CHDRD, Tehran, Iran. Static retinoscopy, qualitative fixation evaluation, Hirschberg test, red reflex assessment and external eye examination were carried out. Other information such as birth weight and maturity of the infants was recorded.It was possible to assess only 320 out of 479 infants due to general condition of some participants. Comparison of mean refractive error in infants' right and left eyes did not show any significant difference. Our findings confirmed that 20.3% had poor fixation, while 2.9% revealed manifest strabismus. The results also revealed the prevalences of myopia, hyperopia and emmetropia are 2.9%, 87%, and 10.1%, respectively. Red reflex abnormalities were significantly found in boys and in preterm infants (p < 0.05. Failure of fixation control was seen more frequently with increasing refractive error, which significantly developed in preterm infants (p < 0.001.These results reflect the necessity of more comprehensive assessments and further follow-up of infants born by ART, especially for premature male ART infants. These results also suggest the probability of fixation condition and visual deficiencies in these infants. It is recommended to pay close attention to this preliminary report about the refractive and fixation condition of the infants born after ART.

  14. Technology projects for characterization--monitoring of volatile organic compounds (VOCs)

    Energy Technology Data Exchange (ETDEWEB)

    Junk, G.A.; Haas, W.J. Jr.

    1992-07-01

    One hundred thirty technology project titles related to the characterization of volatile organic compounds (VOCs) at an arid site are listed alphabetically by first contact person in a master compilation that includes phone numbers, addresses, keywords, and short descriptions. Separate tables are presented for 62 field-demonstrated, 36 laboratory-demonstrated, and 35 developing technology projects. The technology projects in each of these three categories are also prioritized in separate summary tables. Additional tables are presented for a number of other categorizations of the technology projects: In Situ; Fiberoptic; Mass Spectrometer; Optical Spectroscopy; Raman or SERS; Ion Mobility or Acoustic; Associated; and Commercial. Four lists of contact person names are provided so details concerning the projects that deal with sampling, and VOCs in gases, waters, and soils (sediments) can be obtained. Finally, seven wide-ranging conclusions based on observations and experiences during this work are presented.

  15. Information technology deployment in a transition economy: Results from Slovenia

    Directory of Open Access Journals (Sweden)

    Hovelja Tomaž

    2009-01-01

    Full Text Available Information technology (IT is increasingly establishing itself as one of the major topics of study in the OECD area. The resulting OECD studies found that IT has an enormous productive potential; however before an economy can gain most of IT's benefits, several challenges need to be successfully addressed. The key challenges these studies identified are adequate organizational transformations of the enterprises and adequate reorganization of key national institutions. How these two challenges are tackled by the economies that are going through the transition from a socialist towards a coordinated/liberal market economy is, unfortunately, not equally well documented. To improve this situation in this paper I present new findings from one transition economy concerning the issues that the developed OECD countries already highlighted as critical for the successful deployment of IT, and issues that seem specific to the transition environments. The presented findings are based on the study I conducted into 94 enterprises, representing the population of the 914 biggest added value generating enterprises in Slovenia. This article thus tries to allow Slovenia and other economies in a similar situation to draw broad and important conclusions with managerial and political implications on how to deploy all available IT potential.

  16. [How do Prevention Projects Reach their Target Groups? Results of a Survey with Prevention Projects].

    Science.gov (United States)

    Brand, T; Böttcher, S; Jahn, I

    2015-12-01

     The aim of this study was to assess methods used to access target groups in prevention projects funded within the prevention research framework by the German Federal Ministry of Education and Research.  A survey with prevention projects was conducted. Access strategies, communication channels, incentives, programme reach, and successful practical recruitment strategies were explored.  38 out of 60 projects took part in the survey. Most projects accessed their target group within structured settings (e. g., child day-care centers, schools, workplaces). Multiple communication channels and incentives were used, with written information and monetary incentives being used most frequently. Only few projects were able to report their programme reach adequately; programme reach was highest for programmes accessing the target groups in structured settings. The respondents viewed active recruitment via personal communication with the target group and key persons in the settings as the most successful strategy.  The paper provides an overview on recruitment strategies used in current preven-tion projects. More systematic research on programme reach is necessary. © Georg Thieme Verlag KG Stuttgart · New York.

  17. Results from the Deep Space One Technology Validation Mission

    Science.gov (United States)

    Rayman, M.; Varghese, P.; Lehman, D.; Livesay, L.

    1999-01-01

    Launched on October 25, 1998, Deep Space 1 (DS1) is the first mission of NASA's New Millennium Program, chartered to flight validate high-risk, new technologies important for future space and Earth science programs.

  18. Interdisciplinary Project-Based Learning: Technology for Improving Student Cognition

    Science.gov (United States)

    Stozhko, Natalia; Bortnik, Boris; Mironova, Ludmila; Tchernysheva, Albina; Podshivalova, Ekaterina

    2015-01-01

    The article studies a way of enhancing student cognition by using interdisciplinary project-based learning (IPBL) in a higher education institution. IPBL is a creative pedagogic approach allowing students of one area of specialisation to develop projects for students with different academic profiles. The application of this approach in the Ural…

  19. Subarctic warming: Results from the global treeline project

    Energy Technology Data Exchange (ETDEWEB)

    Siren, G.; Shen, S.

    1996-12-31

    The authors reported last year at the 6th Global Warming Science and Policy Conference (GW6), April 3--6, 1995, San Francisco USA, the Global Treeline Project (BLECSCO) has definitively established the northward movement in the 20th century of the northernmost limit for pine trees in Finland. this movement is due to climate warming. The Finnish Forest Research Institute has been working on this problem between 1951 and 1996. The authors have observed over half a century the movements of the coniferous treeline. The subarctic pine tree line is used as a permanent bioindicator of climate change. The dynamic pine tree line in the subarctic of Finland serves as a reliable indicator of expected climate change in the future as well as of climatic fluctuations in the past. The FFRI has tracked comprehensively seed year frequencies, performed dendrochronological studies, fire studies, and ecological studies since the abundant seed year of 1948--50 to the present, and discovered that climate change has favored the northward movement of the pine limit. The authors report the detailed scientific methodology, data, and conclusions.

  20. A Nordic Project Project on High Speed Low Power Design in Sub-micron CMOS Technology for Mobile

    DEFF Research Database (Denmark)

    Olesen, Ole

    1997-01-01

    of including good off-chip components in the design by use of innovative, inexpensive package technology.To achieve a higher level of integration, the project will use a novel codesign approach to the design strategy. Rather than making specifications based on a purely architectural approach, the work uses...... a concurrent approach, where circuit designers and architecture designers co-operate on the design and specifications. This allows more circuit issues to be included in the overall architecture, hopefully resulting in an architecture with circuit blocks suited for full integration....... digital base-band processing on the same chip. Presently, only few examples of CMOS used for RF front-end circuits have been presented by academia, and so far no commercial products exist. The approach has been to do a CMOS block by block replacement of the blocks in traditional transceiver architectures...

  1. Final Project Summary Report Bechtel Nevada and Fiberchem Environmental, Inc., Cooperative Research and Technology Development Project

    Energy Technology Data Exchange (ETDEWEB)

    R. J. Pollina

    1999-04-01

    This is a report summarizing work on a small project dedicated to adapting a new chemical sensing platform for the US Department of Energy and its customers. At the same time and in the spirit of technology transfer, FCI Environmental, Inc., would receive technical support in the form of expertise from the US Department of Energy to assist in developing this product. The sensor is a hybrid integrated-circuit, optical waveguide, chemical sensor that is patented by FCI Environmental, Inc., and manufactured under license by Texas Instruments, Inc. A down-hole penetrometer probe was designed for use in hot, 60 C, hydrocarbon-saturated, saline environment at a depth of 200 feet. The probe design includes three chemical sensing, hybrid integrated-circuits with chemical reference and measurement channels, a water seal, output electronics, and a removable measurement head for replacement in the field. A hand-held chemical detector prototype--containing a hybrid integrated-circuit chemical sensor with reference channel, user alarm, and level display--was designed and constructed, and a software interface developed to operate the hand-held sensor interfaced with a laboratory data acquisition system.

  2. Technology Uncertainty and Project Managers' Information Sharing - A comparative case study of two new product development projects

    DEFF Research Database (Denmark)

    Jepsen, Lisbeth Brøde; Dietrich, Perttu

    2014-01-01

    uncertainty during various phases of new product development (NPD) projects. In this study, we compare two longitudinal NPD sub-projects that differ in uncertainty within the same large NPD project, in which the data source is the complete email exchange between a project manager and various actors...... (consisting of 3979 emails). The results show high levels of information sharing with the customer in both the early and late phases of high uncertainty. Interestingly, in the low uncertainty project, information sharing with the production department and the supplier is higher during the late phase...... of the NPD project. Unexpectedly, in both sub-projects, the project manager shares information with a wider range of both intra- and inter-organization actors in the early phases of the projects than in the late phases....

  3. Decontamination Technologies, Task 3, Urban Remediation and Response Project

    Energy Technology Data Exchange (ETDEWEB)

    Heiser,J.; Sullivan, T.

    2009-06-30

    In the aftermath of a Radiological Dispersal Device (RDD, also known as a dirty bomb) it will be necessary to remediate the site including building exteriors and interiors, equipment, pavement, vehicles, personal items etc. Remediation will remove or reduce radioactive contamination from the area using a combination of removing and disposing of many assets (including possible demolition of buildings), decontaminating and returning to service other assets, and fixing in place or leaving in place contamination that is deemed 'acceptable'. The later will require setting acceptable dose standards, which will require negotiation with all involved parties and a balance of risk and cost to benefit. To accomplish the first two, disposal or decontamination, a combination of technologies will be deployed that can be loosely classified as: Decontamination; Equipment removal and size reduction; and Demolition. This report will deal only with the decontamination technologies that will be used to return assets to service or to reduce waste disposal. It will not discuss demolition, size reduction or removal technologies or equipment (e.g., backhoe mounted rams, rock splitter, paving breakers and chipping hammers, etc.). As defined by the DOE (1994), decontamination is removal of radiological contamination from the surfaces of facilities and equipment. Expertise in this field comes primarily from the operation and decommissioning of DOE and commercial nuclear facilities as well as a small amount of ongoing research and development closely related to RDD decontamination. Information related to decontamination of fields, buildings, and public spaces resulting from the Goiania and Chernobyl incidents were also reviewed and provide some meaningful insight into decontamination at major urban areas. In order to proceed with decontamination, the item being processed needs to have an intrinsic value that exceeds the cost of the cleaning and justifies the exposure of any workers

  4. 1998 report on results of R and D project for industrial science and technology (R and D for technologies of producing innovative high performance material) (development of technologies for structural control material). R and D for high stimuli-responsive material; 1998 nendo dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (kozo seigyo zairyo gijutsu kaihatsu) kodo shigeki oto zairyo no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A report was made on the results of 1998 R and D concerning high stimuli-responsive materials. This R and D was intended to develop technologies for producing, by copying organism, innovative new stocks and new materials which repeatedly provide functions such as separating, transmitting and moving in response to stimuli. In the R and D of polymeric high stimuli-responsive materials, studies were conducted on multi-stimuli-responsive separation materials, molecular recognition controlled separation materials, and cell adhesion/separation materials with molecular recognition function. In the R and D of composite high stimuli-responsive materials, release controlled function materials and materials for actuator were studied. The investigation and research of common basic technologies were carried out on such subjects as synthesis and functional development of multi-signal responded polymer gels, development of temperature-responsive chromatography, synthesis and characterization of novel stimuli-sensitive materials, studies on structural characterization of intelligent gels, novel thermosensitive polymers, polyelectrolytic model networks, etc. (NEDO)

  5. Advanced Technology MEMS-based Acoustic Array Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Interdisciplinary Consulting Corporation proposes a technological advancement of current state-of-the-art acoustic energy harvester for harsh environment...

  6. Advanced Multimission Operations Systems Tech (AMMOS) Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — AMMOS Technology tasks include: - Enhance mission planning and sequence generation tools with constraint based automated planning and scheduling techniques to enable...

  7. Evaluation of Representative Smart Grid Investment Grant Project Technologies: Distributed Generation

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Ruchi; Vyakaranam, Bharat GNVSR

    2012-02-14

    This document is one of a series of reports estimating the benefits of deploying technologies similar to those implemented on the Smart Grid Investment Grant (SGIG) projects. Four technical reports cover the various types of technologies deployed in the SGIG projects, distribution automation, demand response, energy storage, and renewables integration. A fifth report in the series examines the benefits of deploying these technologies on a national level. This technical report examines the impacts of addition of renewable resources- solar and wind in the distribution system as deployed in the SGIG projects.

  8. Review of EOR (enhanced oil recovery) project trends and thermal EOR (enhanced oil recovery) technology

    Energy Technology Data Exchange (ETDEWEB)

    Pautz, J. F.; Sarathi, P.; Thomas, R.

    1990-03-01

    Information on United States (US) enhanced oil recovery (EOR) projects is analyzed to discern trends in applications of EOR technologies. This work is based on an evaluation of current literature and analysis of the Department of Energy (DOE) EOR project data base which contains information on over 1,300 projects. Three-quarters of current US oil production attributed to EOR is derived from thermal EOR processes (TEOR). Changes in the technology of TEOR since the 1984 Enhanced Oil Recovery'' study by the National Petroleum Council (NPC) are reviewed in terms of the current applied technology and reported research. 87 refs., 4 figs., 20 tabs.

  9. Sustainable energy for cashew production chain using innovative clean technology project developments

    Energy Technology Data Exchange (ETDEWEB)

    Pannir Selvam, P.V.; Nandenha, Julio; Santiago, Brunno Henrique de Souza; Silva, Rosalia Tatiane da [Universidade Federal do Rio Grande do Norte (GPEC/DEQ/UFRN), Lagoa Nova, RN (Brazil). Dept. de Engenharia Quimica. Grupo de Pesquisa em Engenharia de Custos e Processos], e-mail: pannirbr@gmail.com

    2006-07-01

    The main objective is to develop a new process synthesis based on the residual biomass waste for the energy production applied to the fruit processing plant with co-production of hot, cold thermal energy using biogas from the wood biomass and animal wastes. After carried out the bibliographical research about the current state of art technology, an engineering project had been developed with the use of the software Super Pro Designer V 4.9. Some simulations of processes of the fast pyrolysis, gasification, bio digestion, generation of energy have been realized including the system integration of energy production as innovation of the present work. Three cases study have been developed: first, the current process of conventional energy using combustion, another one using combined pyrolysis and gasification, and the last one with bio digestion for combined power, heat and chilling. The results about the project investment and the cost analysis, economic viability and cash balance were obtained using software Orc 2004. Several techno-economic parameters of the selected cases study involving process innovation were obtained and compared, where a better energy and materials utilization were observed in relation to conventional process. This project which is still in development phase, involves small scale energy integrated system design. The energy and the process integration cashew fruit production chain, based on the clean technology process design, has enable significant improvement in terms of economic and environmental using optimal system configurations with viability and sustainability. (author)

  10. Cloud County Community College Wind Energy Technology Project and Renewable Energy Center of Excellence

    Energy Technology Data Exchange (ETDEWEB)

    Graham, Bruce [Cloud County Community College, Concordia, KS (United States)

    2016-02-26

    Cloud County Community College's (CCCC) Wind Energy Technology (WET) program is a leader in the renewable energy movement across Kansas and the USA. The field of renewable energy is a growing industry which continues to experience high demand for career opportunities. This CCCC/DOE project entailed two phases: 1) the installation of two Northwind 100 wind turbines, and 2) the continued development of the WET program curriculum, including enhancement of the CCCC Blade Repair Certificate program. This report provides a technical account of the total work performed, and is a comprehensive description of the results achieved.

  11. Large-scale decontamination and decommissioning technology demonstration project at a former uranium metal production facility

    Energy Technology Data Exchange (ETDEWEB)

    Martineit, R.A.; Borgman, T.D.; Peters, M.S.; Stebbins, L.L. [and others

    1997-03-05

    The Department of Energy`s (DOE) Office of Science and Technology Decontamination and Decommissioning (D&D) Focus Area, led by the Federal Energy Technology Center, has been charged with improving upon baseline D&D technologies with the goal of demonstrating and validating more cost-effective and safer technologies to characterize, deactivate, survey, decontaminate, dismantle, and dispose of surplus structures, buildings, and their contents at DOE sites. The D&D Focus Area`s approach to verifying the benefits of the improved D&D technologies is to use them in large-scale technology demonstration (LSTD) projects at several DOE sites. The Fernald Environmental Management Project (FEMP) was selected to host one of the first three LSTD`s awarded by the D&D Focus Area. The FEMP is a DOE facility near Cincinnati, Ohio, that was formerly engaged in the production of high quality uranium metal. The FEMP is a Superfund site which has completed its RUFS process and is currently undergoing environmental restoration. With the FEMP`s selection to host an LSTD, the FEMP was immediately faced with some challenges. The primary challenge was that this LSTD was to be integrated into the FEMP`s Plant 1 D&D Project which was an ongoing D&D Project for which a firm fixed price contract had been issued to the D&D Contractor. Thus, interferences with the baseline D&D project could have significant financial implications. Other challenges include defining and selecting meaningful technology demonstrations, finding/selecting technology providers, and integrating the technology into the baseline D&D project. To date, twelve technologies have been selected, and six have been demonstrated. The technology demonstrations have yielded a high proportion of {open_quotes}winners.{close_quotes} All demonstrated, technologies will be evaluated for incorporation into the FEMP`s baseline D&D strategy.

  12. Utility-Scale Concentrating Solar Power and Photovoltaic Projects: A Technology and Market Overview

    Energy Technology Data Exchange (ETDEWEB)

    Mendelsohn, M.; Lowder, T.; Canavan, B.

    2012-04-01

    Over the last several years, solar energy technologies have been, or are in the process of being, deployed at unprecedented levels. A critical recent development, resulting from the massive scale of projects in progress or recently completed, is having the power sold directly to electric utilities. Such 'utility-scale' systems offer the opportunity to deploy solar technologies far faster than the traditional 'behind-the-meter' projects designed to offset retail load. Moreover, these systems have employed significant economies of scale during construction and operation, attracting financial capital, which in turn can reduce the delivered cost of power. This report is a summary of the current U.S. utility-scale solar state-of-the-market and development pipeline. Utility-scale solar energy systems are generally categorized as one of two basic designs: concentrating solar power (CSP) and photovoltaic (PV). CSP systems can be further delineated into four commercially available technologies: parabolic trough, central receiver (CR), parabolic dish, and linear Fresnel reflector. CSP systems can also be categorized as hybrid, which combine a solar-based system (generally parabolic trough, CR, or linear Fresnel) and a fossil fuel energy system to produce electric power or steam.

  13. Experience in Use of Project Method During Technology Lessons in Secondary Schools of the USA

    Directory of Open Access Journals (Sweden)

    Sheludko Inna

    2015-08-01

    Full Text Available The article examines the opportunities and prospects for the use of experience of project method during “technology lessons” in US secondary schools, since the value of project technology implementation experience into the educational process in the USA for ensuring holistic development of children, preparing them for adult life, in which they will be able to realize themselves and benefit society, seems undeniable to improve the quality of Ukrainian education. Its structure and content accorded with national traditions and European standards have made possible the success of educational components of American secondary school. This encourages national scientists and teachers to identify and scientifically justify the ways how to use scientific achievements of American educational system. Given the above, we have defined the following objectives: to summarize progressive trends and innovative approaches to the quality training of students in national secondary schools; to formulate guidelines that will improve the efficiency of training Ukrainian students during technology lessons and as a result, will provide the successful integration of the national education system into the European educational space.

  14. CO2 CAPTURE PROJECT-AN INTEGRATED, COLLABORATIVE TECHNOLOGY DEVELOPMENT PROJECT FOR NEXT GENERATION CO2 SEPARATION, CAPTURE AND GEOLOGIC SEQUESTRATION

    Energy Technology Data Exchange (ETDEWEB)

    Helen Kerr

    2004-04-01

    The CO{sub 2} Capture Project (CCP) is a joint industry project, funded by eight energy companies (BP, ChevronTexaco, EnCana, Eni, Norsk Hydro, Shell, Statoil, and Suncor) and three government agencies (European Union (DG Res & DG Tren), Norway (Klimatek) and the U.S.A. (Department of Energy)). The project objective is to develop new technologies, which could reduce the cost of CO{sub 2} capture and geologic storage by 50% for retrofit to existing plants and 75% for new-build plants. Technologies are to be developed to ''proof of concept'' stage by the end of 2003. The project budget is approximately $24 million over 3 years and the work program is divided into eight major activity areas: (1) Baseline Design and Cost Estimation--defined the uncontrolled emissions from each facility and estimate the cost of abatement in $/tonne CO{sub 2}. (2) Capture Technology, Post Combustion--technologies, which can remove CO{sub 2} from exhaust gases after combustion. (3) Capture Technology, Oxyfuel--where oxygen is separated from the air and then burned with hydrocarbons to produce an exhaust with wet high concentrations of CO{sub 2} for storage. (4) Capture Technology, Pre-Combustion--in which, natural gas and petroleum coke are converted to hydrogen and CO{sub 2} in a reformer/gasifier. (5) Common Economic Model/Technology Screening--analysis and evaluation of each technology applied to the scenarios to provide meaningful and consistent comparison. (6) New Technology Cost Estimation: on a consistent basis with the baseline above, to demonstrate cost reductions. (7) Geologic Storage, Monitoring and Verification (SMV)--providing assurance that CO{sub 2} can be safely stored in geologic formations over the long term. (8) Non-Technical: project management, communication of results and a review of current policies and incentives governing CO{sub 2} capture and storage. Technology development work dominated the past six months of the project. Numerous studies

  15. Anchored Instruction in Preservice Educational Technology Classes: A Research Project.

    Science.gov (United States)

    Bauer, Jeffrey W.

    This study examined the effectiveness of the anchored instruction (i.e., using a theme or anchor around which various learning activities take place) approach in preparing preservice teachers to integrate technology. Participants were 48 students enrolled in the three sections of a preservice educational technology class during the summer of 1997.…

  16. Examining the Relationship between Technology Leadership Behaviors and Project Success

    Science.gov (United States)

    Bolman, David B.

    2012-01-01

    Organizations invest substantial resources into technology initiatives intended to generate advantages associated with improved use of human resources, increased operational efficiencies, and creating new capacities within processes and products; however, there is limited knowledge regarding how technology leadership behaviors influence project…

  17. FACTORS EFFECTING TECHNOLOGY ACQUISITION DECISIONS IN NATIONAL DEFENSE PROJECTS

    Directory of Open Access Journals (Sweden)

    Gökhan ASTAN

    2015-04-01

    Full Text Available “Defense Industry” (DI not only strengthens the military power of a country, but also effects other fields of technology and economy positively and enables countries to be much more powerful in terms of their competitiveness in technology and knowledge instead of merely being a follower and a continuous customer. If a state seeks to have high-tech and capable DI the only foundation is to create a national environment which is managed based on a systematic ”Technology Management” philosophy and well-defined “Acquisition” process. With already reduced resources, it is crucial to spend money for the most needed and right technology. Consequently, the focus of this study is on the “Acquisition" and "Technology Transfer" (TT concepts and approaches. As such the different TT methods are compared and their advantages and disadvantages discussed. In the last part of the study, DI is described and assessed in terms of the TT methods.

  18. Adaptive Deployable Entry and Placement Technology (ADEPT) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The ADEPT Project is developing a mechanically deployable low-ballistic coefficient aeroshell entry system to perform entry descent landing (EDL) functions for...

  19. Technology Base Research Project for electrochemical energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Kinoshita, K. (ed.)

    1991-06-01

    This report is an executive summary of major project goals and descriptions for electrochemical energy storage. Exploratory research, applied science research, air systems research, milestones, and management activities are a few of the topics discussed. (JL)

  20. Demonstration of Submillimeter Astrophysics Technology at Caltech Submillimeter Observatory Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The following are the objectives of this project:(1) Demonstration of 1600-element Kinetic Inductance Detector (KID) imaging array operating at 350 micron with near...

  1. Fast GC for Space Applications Based on PIES Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR Phase II project is aimed at the development of an analytical instrument which combines the advantages of fast gas chromatography (GC) and a detector that...

  2. GIS Technology: Resource and Habitability Assessment Tool Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This is a one-year project to apply a GIS analysis tool to new orbital data for lunar resource assessment and martian habitability identification.  We used...

  3. Geometry Projects Linking Mathematics, Literacy, Art, and Technology.

    Science.gov (United States)

    Little, Catherine

    1999-01-01

    Describes a geometry project for students using the Geometer's Sketchpad. Students choose from constructing an instruction manual, writing and illustrating a children's picture book, or creating a piece of art in the Escher style. (ASK)

  4. Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium field / Development of technology to treat aquatic environment by using microorganisms fixed on carbon fabrics (abbreviation: carbon/aquatic environment project) (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium bun`ya / tanso sen`i nansoshiki eno biseibutsu kochaku gensho wo riyoshita mizukankyo seibi gijutsu no kaihatsu (ryakusho: tanso mizu kankyo project) daiichi nendo seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Out of the development of technology to arrange the aquatic environment using phenomena of microorganism fixation on carbon fiber soft textures, the paper stated the fiscal 1997 result. On carbon fibers in a state of swaying in water, microorganisms in water fix in an amazingly large quantity. A catalog was compiled of 58 kinds of carbon fabrics trially woven and knitted. When carbon fiber is used as activated sludge carrier, activity of microorganism lasts more than one year. Only a little amount of surplus sludge is generated. The fixed microorganisms are more active in case of carbon fiber than in case of nylon and polyester fibers. Fiber texture models of carbon fiber fixing activated sludge groups were proposed. By pump operation, the water flow inside/outside microorganism groups is being accelerated. Several new strains of bacillus carboniphilus were isolated/identified from soil and marsh. To grasp relationships of characteristics among three elements such as the state of aquatic environment, fiber, and microorganism group, the experiment was prepared. Preliminary work is conducted to derive a simple equation for facility design, and experimental directions to obtain design conditions were proposed. 6 refs., 166 figs., 47 tabs.

  5. Operation algorithm of the information system of improving organizational and technological reliability of construction projects using energy efficient technologies

    Directory of Open Access Journals (Sweden)

    Ginzburg Aleksandr Vital’evich

    2016-10-01

    Full Text Available The main source for the development of construction projects with energy-efficient technologies in use is investments. The traditional approaches of risk management: insurance, diversification and redundancy only raise the cost of the construction project, which has a negative impact on the investor’s decision to invest. In order to solve this problem an information system has been developed, which is based on the principle of insightful analysis of the potential “pure” risks and a list of recommendations of risk management. This tool allows identifying all the weaknesses of a construction project, improving the organizational and technological reliability, and imparting an understanding to the investor / a customer of the resources required for the project implementation.

  6. NASA's Involvement in Technology Development and Transfer: The Ohio Hybrid Bus Project

    Science.gov (United States)

    Viterna, Larry A.

    1997-01-01

    A government and industry cooperative is using advanced power technology in a city transit bus that will offer double the fuel economy, and reduce emissions to one tenth of government standards. The heart of the vehicle's power system is a natural gas fueled generator unit. Power from both the generator and an advanced energy storage system is provided to a variable speed electric motor attached to the rear drive axle. A unique aspect of the vehicle's design is its use of "super" capacitors for recovery of energy during braking. This is the largest vehicle ever built using this advanced energy recovery technology. This paper describes the project goals and approach, results of its system performance modeling, and the status of the development team's effort.

  7. An extension of the technology acceptance model for business intelligence systems: project management maturity perspective

    Directory of Open Access Journals (Sweden)

    Mirjana Pejić Bach

    2017-01-01

    Full Text Available Business intelligence systems (BISs refer to wide range of technologies and applications useful for retrieving and analyzing the large amount of information with the goal to generate knowledge useful for making effective business decision. In order to investigate adoption of BISs in companies, we propose a model based on the technology acceptance model (TAM that is expanded by variables representing the concept of a project management maturity (PMM. The survey on the sample of USA companies has been conducted with the chief information officer (CIO as the main informant. Structural equations model has been developed in order to test the research model. Results indicate that TAM expanded with the notion of PMM is useful in increasing understanding of BISs adoption in companies.

  8. Instrumented Prodder : Preliminary Results of the Technology Demonstrator Evaluation

    NARCIS (Netherlands)

    Schoolderman, A.J.; Dijk, S.G.M. van; Deurloo, D.; Russel, K.

    2003-01-01

    A prodder for mine detection has been enhanced with sensors and electronics in order to provide the operator with information on the force exerted during the prodding operation and on the type of material that is in contact with the tip of the prodder. The performance of a technology demonstrator ve

  9. Magnetic levitation technology and its applications in exploration projects

    Science.gov (United States)

    Shu, Quan-Sheng; Cheng, Guangfeng; Susta, Joseph T.; Hull, John R.; Fesmire, James E.; Augustanowicz, Stan D.; Demko, Jonathan A.; Werfel, Frank N.

    2006-02-01

    An energy efficient cryogenic transfer line with magnetic suspension has been prototyped and cryogenically tested. The prototype transfer line exhibits cryogen saving potential of 30-35% in its suspension state as compared to its solid support state. Key technologies developed include novel magnetic levitation using multiple-pole high temperature superconductor (HTS) and rare earth permanent-magnet (PM) elements and a smart cryogenic actuator as the warm support structure. These technologies have vast applications in extremely low thermal leak cryogenic storage/delivery containers, superconducting magnetic bearings, smart thermal switches, etc. This paper reviews the development work and discusses future applications of established technologies.

  10. FACTORS EFFECTING TECHNOLOGY ACQUISITION DECISIONS IN NATIONAL DEFENSE PROJECTS

    OpenAIRE

    2015-01-01

    “Defense Industry” (DI) not only strengthens the military power of a country, but also effects other fields of technology and economy positively and enables countries to be much more powerful in terms of their competitiveness in technology and knowledge instead of merely being a follower and a continuous customer. If a state seeks to have high-tech and capable DI the only foundation is to create a national environment which is managed based on a systematic ”Technology Management” philosophy a...

  11. FY16 Safeguards Technology Cart-Portable Mass Spectrometer Project Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, Cyril V. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Whitten, William B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-02-01

    The Oak Ridge National Laboratory project for the Next Generation Safeguards Initiative Safeguards Technology Development Subprogram has been involved in the development of a cart portable mass spectrometer based on a Thermo ITQ ion trap mass spectrometer (referred to simply as the ITQ) for the field analysis of 235U/238U ratios in UF6. A recent discovery of the project was that combining CO2 with UF6 and introducing the mixture to the mass spectrometer (MS) appeared to increase the ionization efficiency and, thus, reduce the amount of UF6 needed for an analysis while also reducing the corrosive effects of the sample. However, initial experimentation indicated that mixing parameters should be closely controlled to ensure reproducible results. To this end, a sample manifold (SM) that would ensure the precise mixing of UF6 and CO2 was designed and constructed. A number of experiments were outlined and conducted to determine optimum MS and SM conditions which would provide the most stable isotope ratio analysis. The principal objective of the project was to provide a retrofit ITQ mass spectrometer operating with a SM capable of achieving a variation in precision of less than 1% over 1 hour of sampling. This goal was achieved by project end with a variation in precision of 0.5 to 0.8% over 1 hour of sampling.

  12. Phase Change Permeation Technology for Environmental Control & Life Support Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This project will explore a recent advancement in Phase Change Permeation™ technology to enable improved (1) water recovery from urine/brine for Environmental...

  13. 77 FR 69601 - Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects

    Science.gov (United States)

    2012-11-20

    ... of the Secretary Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects AGENCY: Office of the Deputy Assistant Secretary of Defense (Civilian Personnel Policy) (DASD (CPP)), Department of Defense (DoD). ACTION: Notice of proposed amendment to demonstration...

  14. 76 FR 1923 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2011-01-11

    ... organization's human resources management authorities, policies, and practices must have the flexibility needed... contribution-based compensation system, talent acquisition/retention, and professional human capital planning... Defense Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

  15. Evaluation of project based learning in the area of manufacturing and statistics in the degree of industrial technology

    Directory of Open Access Journals (Sweden)

    Irene Buj-Corral

    2015-06-01

    Full Text Available In the subject Project I in the second year of the Degree in Industrial Technology Engineering taught at the School of Industrial Engineering of Barcelona (ETSEIB, groups of 3-4 students develop a project along a semester. Results of 2 projects are presented related to manufacturing, measurement of parts and the statistical treatment of data, placing emphasis on cross-curricular issues, recording of oral presentations and how this helped improving its quality, as well as evaluation of the subject by the students by means of questionnaires and open-ended questions.

  16. THE TAOS PROJECT: RESULTS FROM SEVEN YEARS OF SURVEY DATA

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Z.-W.; Lehner, M. J.; Wang, J.-H.; Wen, C.-Y.; Wang, S.-Y.; King, S.-K.; Cook, K. H.; Lee, T. [Institute of Astronomy and Astrophysics, Academia Sinica. 11F of Astronomy-Mathematics Building, National Taiwan University. No. 1, Sec. 4, Roosevelt Road, Taipei 10617, Taiwan (China); Granados, A. P. [Instituto de Astronomia, Universidad Nacional Autonoma de Mexico, Apdo. Postal 106, Ensenada, Baja California 22800 (Mexico); Alcock, C.; Protopapas, P. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Axelrod, T. [Steward Observatory, 933 North Cherry Avenue, Room No. 204, Tucson AZ 85721 (United States); Bianco, F. B. [Center for Cosmology and Particle Physics, New York University, 4 Washington Place, New York, NY 10003 (United States); Byun, Y.-I. [Department of Astronomy and University Observatory, Yonsei University, 134 Shinchon, Seoul 120-749 (Korea, Republic of); Chen, W. P. [Institute of Astronomy, National Central University, No. 300, Jhongda Road, Jhongli City, Taoyuan County 320, Taiwan (China); Coehlo, N. K. [Department of Statistics, University of California Berkeley, 367 Evans Hall, Berkeley, CA 94720 (United States); De Pater, I. [Department of Astronomy, University of California Berkeley, 601 Campbell Hall, Berkeley, CA 94720 (United States); Kim, D.-W. [Max Planck Institute for Astronomy, Koenigstuhl 17, D-69117 Heidelberg (Germany); Lissauer, J. J. [Space Science and Astrobiology Division 245-3, NASA Ames Research Center, Moffett Field, CA 94035 (United States); Marshall, S. L., E-mail: zwzhang@asiaa.sinica.edu.tw [Kavli Institute for Particle Astrophysics and Cosmology, 2575 Sand Hill Road, MS 29, Menlo Park, CA 94025 (United States); and others

    2013-07-01

    The Taiwanese-American Occultation Survey (TAOS) aims to detect serendipitous occultations of stars by small ({approx}1 km diameter) objects in the Kuiper Belt and beyond. Such events are very rare (<10{sup -3} events per star per year) and short in duration ({approx}200 ms), so many stars must be monitored at a high readout cadence. TAOS monitors typically {approx}500 stars simultaneously at a 5 Hz readout cadence with four telescopes located at Lulin Observatory in central Taiwan. In this paper, we report the results of the search for small Kuiper Belt objects (KBOs) in seven years of data. No occultation events were found, resulting in a 95% c.l. upper limit on the slope of the faint end of the KBO size distribution of q = 3.34-3.82, depending on the surface density at the break in the size distribution at a diameter of about 90 km.

  17. Technologies Enabling Exploration of Skylights, Lava Tubes and Caves Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Missions to date have orbited and roved, but sub-planetary worlds elude exploration. This investigation proposes to develop technology for venturing underground and...

  18. Biomedical Monitoring by a Novel Noncontact Radio Frequency Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This technology will be a quantum advance in cardiac monitoring and will be applicable in numerous situations such as for immediate assessment and monitoring of...

  19. Automated Service Discovery using Autonomous Control Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — With the advent of mobile commerce technologies, the realization of pervasive computing and the formation of ad-hoc networks can be leveraged to the benefit of the...

  20. Prototype-Technology Evaluator and Research Aircraft Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Area-I team has developed and flight tested the unmanned Prototype-Technology Evaluation and Research Aircraft or PTERA ("ptera" being Greek for wing, or...

  1. Lightweight Pump Technology for Advanced Green Monopropellants Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Systima will develop an innovative light weight self-pressurizing pump (SPP) technology to provide a constant-pressure supply of monopropellant to a spacecraft or...

  2. Affordable, Precision Reflector Mold Technology (PDRT08-029) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advances in replication mold technology that reduce material costs, grinding time, and polishing time would enable fabrication of large, precision molds and possibly...

  3. Polymer Matrix Composites using Fused Deposition Modeling Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Fused deposition modeling (FDM) is an additive manufacturing technology that allows fabrication of complex three-dimensional geometries layer-by-layer. The goal of...

  4. Novel Polymer Microfluidics Technology for In Situ Planetary Exploration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Los Gatos Research proposes to develop a new polymer based microfluidics technology for NASA planetary science applications. In particular, we will design, build and...

  5. Calibration/Validation Technology for the CO2 Satellite Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We are proposing to develop high altitude CO2 analyzer technology that can be deployed on the research aircraft of NASA's Airborne Science Program (ASP). The...

  6. Health-Enabled Smart Sensor Fusion Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — It has been proven that the combination of smart sensors with embedded metadata and wireless technologies present real opportunities for significant improvements in...

  7. An MMOD Risk Mitigation Technology for Spacecraft TPS Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposed technology uses nitrogen or helium gas and water to prevent structural damage that could lead to loss of vehicle and loss of crew caused by high...

  8. The Coronal Loop Inventory Project: Expanded Analysis and Results

    Science.gov (United States)

    Schmelz, J. T.; Christian, G. M.; Chastain, R. A.

    2016-11-01

    We have expanded upon earlier work that investigates the relative importance of coronal loops with isothermal versus multithermal cross-field temperature distributions. These results are important for determining if loops have substructure in the form of unresolved magnetic strands. We have increased the number of loops targeted for temperature analysis from 19 to 207 with the addition of 188 new loops from multiple regions. We selected all loop segments visible in the 171 Å images of the Atmospheric Imaging Assembly (AIA) that had a clean background. Eighty-six of the new loops were rejected because they could not be reliably separated from the background in other AIA filters. Sixty-one loops required multithermal models to reproduce the observations. Twenty-eight loops were effectively isothermal, that is, the plasma emission to which AIA is sensitive could not be distinguished from isothermal emission, within uncertainties. Ten loops were isothermal. Also, part of our inventory was one small flaring loop, one very cool loop whose temperature distribution could not be constrained by the AIA data, and one loop with inconclusive results. Our survey can confirm an unexpected result from the pilot study: we found no isothermal loop segments where we could properly use the 171-to-193 ratio method, which would be similar to the analysis done for many loops observed with TRACE and EIT. We recommend caution to observers who assume the loop plasma is isothermal, and hope that these results will influence the direction of coronal heating models and the effort modelers spend on various heating scenarios.

  9. Results of the Marine Ice Sheet Model Intercomparison Project, MISMIP

    Directory of Open Access Journals (Sweden)

    F. Pattyn

    2012-05-01

    Full Text Available Predictions of marine ice-sheet behaviour require models that are able to robustly simulate grounding line migration. We present results of an intercomparison exercise for marine ice-sheet models. Verification is effected by comparison with approximate analytical solutions for flux across the grounding line using simplified geometrical configurations (no lateral variations, no effects of lateral buttressing. Unique steady state grounding line positions exist for ice sheets on a downward sloping bed, while hysteresis occurs across an overdeepened bed, and stable steady state grounding line positions only occur on the downward-sloping sections. Models based on the shallow ice approximation, which does not resolve extensional stresses, do not reproduce the approximate analytical results unless appropriate parameterizations for ice flux are imposed at the grounding line. For extensional-stress resolving "shelfy stream" models, differences between model results were mainly due to the choice of spatial discretization. Moving grid methods were found to be the most accurate at capturing grounding line evolution, since they track the grounding line explicitly. Adaptive mesh refinement can further improve accuracy, including fixed grid models that generally perform poorly at coarse resolution. Fixed grid models, with nested grid representations of the grounding line, are able to generate accurate steady state positions, but can be inaccurate over transients. Only one full-Stokes model was included in the intercomparison, and consequently the accuracy of shelfy stream models as approximations of full-Stokes models remains to be determined in detail, especially during transients.

  10. Compilation of publication and results from project C2

    DEFF Research Database (Denmark)

    Holck, Ole

    1999-01-01

    of ventilation and insulation materials.Results from investigation of ventilation rates together with a model of the moisture inside the collector are built into the computer program. It has been found that modelling of the moisture transfer in backside insulation is essential to determine the humidity...... in the air gap of the collector.The objective is to develop guidelines for solar collector design to achieve the most favourable microclimate condition for materials. As a tool the computer model will be useful to fulfil this. Guidelines for collectors will be essential for manufactures to improve the long...

  11. The last millennium climate reanalysis project: Framework and first results

    Science.gov (United States)

    Hakim, Gregory J.; Emile-Geay, Julien; Steig, Eric J.; Noone, David; Anderson, David M.; Tardif, Robert; Steiger, Nathan; Perkins, Walter A.

    2016-06-01

    An "offline" approach to DA is used, where static ensemble samples are drawn from existing CMIP climate-model simulations to serve as the prior estimate of climate variables. We use linear, univariate forward models ("proxy system models (PSMs)") that map climate variables to proxy measurements by fitting proxy data to 2 m air temperature from gridded instrumental temperature data; the linear PSMs are then used to predict proxy values from the prior estimate. Results for the LMR are compared against six gridded instrumental temperature data sets and 25% of the proxy records are withheld from assimilation for independent verification. Results show broad agreement with previous reconstructions of Northern Hemisphere mean 2 m air temperature, with millennial-scale cooling, a multicentennial warm period around 1000 C.E., and a cold period coincident with the Little Ice Age (circa 1450-1800 C.E.). Verification against gridded instrumental data sets during 1880-2000 C.E. reveals greatest skill in the tropics and lowest skill over Northern Hemisphere land areas. Verification against independent proxy records indicates substantial improvement relative to the model (prior) data without proxy assimilation. As an illustrative example, we present multivariate reconstructed fields for a singular event, the 1808/1809 "mystery" volcanic eruption, which reveal global cooling that is strongly enhanced locally due to the presence of the Pacific-North America wave pattern in the 500 hPa geopotential height field.

  12. Test results, Industrial Solar Technology parabolic trough solar collector

    Energy Technology Data Exchange (ETDEWEB)

    Dudley, V.E. [EG and G MSI, Albuquerque, NM (United States); Evans, L.R.; Matthews, C.W. [Sandia National Labs., Albuquerque, NM (United States)

    1995-11-01

    Sandia National Laboratories and Industrial Solar Technology are cost-sharing development of advanced parabolic trough technology. As part of this effort, several configurations of an IST solar collector were tested to determine the collector efficiency and thermal losses with black chrome and black nickel receiver selective coatings, combined with aluminized film and silver film reflectors, using standard Pyrex{reg_sign} and anti-reflective coated Pyrex{reg_sign} glass receiver envelopes. The development effort has been successful, producing an advanced collector with 77% optical efficiency, using silver-film reflectors, a black nickel receiver coating, and a solgel anti-reflective glass receiver envelope. For each receiver configuration, performance equations were empirically derived relating collector efficiency and thermal losses to the operating temperature. Finally, equations were derived showing collector performance as a function of input insolation value, incident angle, and operating temperature.

  13. Latest NIKA results and the NIKA-2 project

    CERN Document Server

    Monfardini, A; Adane, A; Ade, P; André, P; Beelen, A; Belier, B; Benoit, A; Bideaud, A; Billot, N; Bourrion, O; Calvo, M; Catalano, A; Coiffard, G; Comis, B; D'Addabbo, A; Désert, F -X; Doyle, S; Goupy, J; Kramer, C; Leclercq, S; Macias-Perez, J; Martino, J; Mauskopf, P; Mayet, F; Pajot, F; Pascale, E; Ponthieu, N; Revéret, V; Rodriguez, L; Savini, G; Schuster, K; Sievers, A; Tucker, C; Zylka, R

    2013-01-01

    NIKA (New IRAM KID Arrays) is a dual-band imaging instrument installed at the IRAM (Institut de RadioAstronomie Millimetrique) 30-meter telescope at Pico Veleta (Spain). Two distinct Kinetic Inductance Detectors (KID) focal planes allow the camera to simultaneously image a field-of-view of about 2 arc-min in the bands 125 to 175 GHz (150 GHz) and 200 to 280 GHz (240 GHz). The sensitivity and stability achieved during the last commissioning Run in June 2013 allows opening the instrument to general observers. We report here the latest results, in particular in terms of sensitivity, now comparable to the state-of-the-art Transition Edge Sensors (TES) bolometers, relative and absolute photometry. We describe briefly the next generation NIKA-2 instrument, selected by IRAM to occupy, from 2015, the continuum imager/polarimeter slot at the 30-m telescope.

  14. Profiting from empowerment? Investigating dissemination avenues for educational technology content within an emerging market solutions project

    NARCIS (Netherlands)

    P.A. Arora (Payal)

    2005-01-01

    textabstractABSTRACT: The Stills in Sync (SIS) project is a joint initiative of the nonprofit organization PlanetRead and the global information and communication technology (ICT) company Hewlett Packard (HP). The SIS project entails creating a multimedia product designed to enhance literacy in

  15. Becoming Little Scientists: Technologically-Enhanced Project-Based Language Learning

    Science.gov (United States)

    Dooly, Melinda; Sadler, Randall

    2016-01-01

    This article outlines research into innovative language teaching practices that make optimal use of technology and Computer-Mediated Communication (CMC) for an integrated approach to Project-Based Learning. It is based on data compiled during a 10- week language project that employed videoconferencing and "machinima" (short video clips…

  16. Tension awareness of stakeholders in large technology projects : a duality perspective

    NARCIS (Netherlands)

    Boonstra, Albert; van Offenbeek, Marjolein; Vos, Janita F.J.

    2017-01-01

    This paper analyzes the tensions evolving from project management dilemmas and how they relate to stakeholders in large technology projects. The study addresses an organization-wide electronic health record implementation in a large hospital. It adopts a duality lens in exploring whether and how

  17. Virtual Teaming and Collaboration Technology: A Study of Influences on Virtual Project Outcomes

    Science.gov (United States)

    Broils, Gary C.

    2014-01-01

    The purpose of this quantitative correlational study was to explore the relationships between the independent variables, contextual factors for virtual teams and collaboration technology, and the dependent variable, virtual project outcomes. The problem leading to the need for the study is a lower success rate for virtual projects compared to…

  18. 78 FR 34655 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2013-06-10

    ... of the Secretary Science and Technology Reinvention Laboratory Personnel Management Demonstration... Demonstration Project (75 FR 77380-77447, December 10, 2010). SUMMARY: On December 10, 2010 (75 FR 77380-77447), DoD published a notice of approval of a personnel management demonstration project for eligible...

  19. Tension Awareness of Stakeholders in Large Technology Projects : A Duality Perspective

    NARCIS (Netherlands)

    Boonstra, Albert; van Offenbeek, Marjolein; Vos, Janita F.J.

    2017-01-01

    This article analyzes the tensions evolving from project management dilemmas and how they relate to stakeholders in large technology projects. The study addresses an organization-wide electronic health record implementation in a large hospital. It adopts a duality lens in exploring whether and how

  20. Statistics on Science and Technology in Latin America, Experience with UNESCO Pilot Projects, 1972-1974.

    Science.gov (United States)

    Thebaud, Schiller

    This report examines four UNESCO pilot projects undertaken in 1972 in Brazil, Colombia, Peru, and Uruguay to study the methods used for national statistical surveys of science and technology. The projects specifically addressed the problems of comparing statistics gathered by different methods in different countries. Surveys carried out in Latin…

  1. Profiting from empowerment? Investigating dissemination avenues for educational technology content within an emerging market solutions project

    NARCIS (Netherlands)

    P.A. Arora (Payal)

    2005-01-01

    textabstractABSTRACT: The Stills in Sync (SIS) project is a joint initiative of the nonprofit organization PlanetRead and the global information and communication technology (ICT) company Hewlett Packard (HP). The SIS project entails creating a multimedia product designed to enhance literacy in rura

  2. Virtual Teaming and Collaboration Technology: A Study of Influences on Virtual Project Outcomes

    Science.gov (United States)

    Broils, Gary C.

    2014-01-01

    The purpose of this quantitative correlational study was to explore the relationships between the independent variables, contextual factors for virtual teams and collaboration technology, and the dependent variable, virtual project outcomes. The problem leading to the need for the study is a lower success rate for virtual projects compared to…

  3. Scientific and technological progress and innovation of Three Gorges Project%Scientific and technological progress and innovation of Three Gorges Project

    Institute of Scientific and Technical Information of China (English)

    Zhang Chaoran; Sun Zhiyu

    2011-01-01

    In the design, construction and operation periods of the Three Gorges Project (TGP), great challenges have been met in different fields such as water resources and hydropower project construction, electromechanical equipment manufacture and ecological environment protection. In view of the key techniques and difficulties in the construction period, scientific and technological breakthroughs have been made by the experts and scholars of various fields and a series of innovative achievements are gained, which make the scientific and technological levels in relevant fields improved. Some major innovative achievements in the construction and operation of TGP are enumerated, which are significant for the hydropower project construction and clean energy development in the future in China.

  4. Automated Demand Response Technology Demonstration Project for Small and Medium Commercial Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Page, Janie; Kiliccote, Sila; Dudley, Junqiao Han; Piette, Mary Ann; Chiu, Albert K.; Kellow, Bashar; Koch, Ed; Lipkin, Paul

    2011-07-01

    Small and medium commercial customers in California make up about 20-25% of electric peak load in California. With the roll out of smart meters to this customer group, which enable granular measurement of electricity consumption, the investor-owned utilities will offer dynamic prices as default tariffs by the end of 2011. Pacific Gas and Electric Company, which successfully deployed Automated Demand Response (AutoDR) Programs to its large commercial and industrial customers, started investigating the same infrastructures application to the small and medium commercial customers. This project aims to identify available technologies suitable for automating demand response for small-medium commercial buildings; to validate the extent to which that technology does what it claims to be able to do; and determine the extent to which customers find the technology useful for DR purpose. Ten sites, enabled by eight vendors, participated in at least four test AutoDR events per site in the summer of 2010. The results showed that while existing technology can reliably receive OpenADR signals and translate them into pre-programmed response strategies, it is likely that better levels of load sheds could be obtained than what is reported here if better understanding of the building systems were developed and the DR response strategies had been carefully designed and optimized for each site.

  5. Technological and regulatory aspects of quality management during the life cycle of investment and construction projects

    Directory of Open Access Journals (Sweden)

    Kropyvko Serhii Maksymovych

    2016-12-01

    Full Text Available The division of the life cycle of investment and construction projects in four phases, based on their technological features, is proposed in the article. Regulatory aspects of quality management during each phase of the life cycle of investment and construction projects are analyzed. The model of quality management during the phases of the life cycle of investment and construction project is developed.

  6. Diagnostic framework and health check tool for engineering and technology projects

    Directory of Open Access Journals (Sweden)

    Simon P Philbin

    2014-10-01

    Full Text Available Purpose: Development of a practitioner oriented diagnostic framework and health check tool to support the robust assessment of engineering and technology projects.Design/methodology/approach: The research is based on a literature review that draws together insights on project assessment and critical success factors to establish an integrated systems view of projects. This is extended to allow a comprehensive diagnostic framework to be developed along with a high-level health check tool that can be readily deployed on projects. The utility of the diagnostic framework and health check tool are explored through three illustrative case studies, with two from Canada and one from the United Kingdom. Findings andOriginality/value: The performance of engineering and technology projects can be viewed through a systems perspective and being a function of six sub-systems that are: process, technology, resources, impact, knowledge and culture. The diagnostic framework that is developed through this research integrates these sub-systems to provide a comprehensive assessment methodology for projects, which is linked to existing best practice for project reviews, performance management and maturity models. The case studies provide managerial insights that are related to the diagnostic framework but crucially also position the approach in the context of industrial applications for construction engineering and technology management.Research limitations/implications: The case study approach includes two case studies from the construction and facilities development sector with the third case study from the research and technology sector. Further work is required to investigate the use of the diagnostic framework and health check tool in other sectors.Practical implications: The health check tool will be of practical benefit to new projects managers that require access to a robust and convenient project review methodology for assessing the status and health of a

  7. A Survey of Technologies Supporting Virtual Project Based Learning

    DEFF Research Database (Denmark)

    Dirckinck-Holmfeld, Lone

    2002-01-01

    for evaluation is proposed where negotiation of meaning, coordination and resource management are identified as the key concepts in virtual project based learning. Three e-learning systems are selected for the survey, Virtual-U, Lotus Learningspace and Lotus Quickplace, as each system offers different strategies...

  8. Industrial Technology Modernization Program. Project 32. Factory Vision. Phase 2

    Science.gov (United States)

    1988-04-01

    400B is through floppy disk media . On the shop floor, a set-up person is responsible for setting up the machines. The set-up person must look at the...million dollars. An additional five millon dollars of projected savings would be associated with the incorporation of the fifth cell for the same ten

  9. Usability in a Cultural Context: A Report on the Scope, Process and Research Results of CultUsab - The Cultural Usability Project

    OpenAIRE

    Clemmensen, Torkil; Yammiyavar, Pradeep; Ørngreen, Rikke; Katre, Dinesh

    2010-01-01

    International audience; This paper focuses on presenting and discussing the aim, context, challenges, results, and impact of the Cultural usability project named as CultUsab. This project was a four year international research effort from 2006 to 2009, which was supported by a grant from the Danish Research Councils for Independent Research in Culture and Communication. The project aimed at innovating processes in Information and Communication Technology development through an understanding o...

  10. Study on the Factors Influencing the Level of Innovation in Agricultural Science and Technology Projects

    Institute of Scientific and Technical Information of China (English)

    Jing; SUN; Baofeng; CHEN

    2015-01-01

    This paper carries out a questionnaire survey of persons in charge of the agricultural project in the " Eleventh Five-Year National Support Program" on the level of innovation in projects and the factors influencing innovation. After the linear regression analysis of the survey data,it is found that the factors influencing the innovation in agricultural science and technology projects include the level of innovation in scientific achievements,efficiency of research methods and creation of innovation environment. Through the variance analysis of the level of innovation and its influencing factors related to different innovators,it is found that there are differences in the statistical significance of level of innovation in projects among universities,research institutes,research and extension departments directly under the government,and enterprises; there are no significant differences in the understanding of factors influencing innovation,that is,different innovators basically have the same understanding of factors influencing innovation,but the assessment on level of innovation in projects completed is different to some extent.On this basis,this paper proposes the recommendations for further strengthening the level of innovation in agricultural science and technology projects in order to provide a theoretical reference and practical basis for the project managers to effectively improve the level of agricultural science and technology project management,and enhance the level of innovation in projects.

  11. Exploring the Effects of Technology Overload on the Outcomes of Enterprise Resource Planning (ERP) Implementation Projects

    Science.gov (United States)

    Kates, Earl B.

    2016-01-01

    Despite significant investments made by organizations to implement ERP systems and prior research that explored contributing factors of ERP failure, the ERP implementation success rate continues to remain low in practice. Increased technology usage in the workplace coupled with higher dependency on technology to complete project tasks often leads…

  12. A Constructivist Stretch: Preservice Teachers Meet Preteens in a Technology-Based Literacy Project.

    Science.gov (United States)

    Bauer, John F.; Anderson, Rebecca S.

    2002-01-01

    Describes a study conducted within a constructivist framework to examine pre-service teachers' development and implementation of a collaborative, technology-based literacy project with 11- and 12-year-old learners. Concludes that the pre-service teachers learned the value of Internet technology, e-mail, and hypermedia applications, but problems…

  13. Current status and future tasks of the Sunshine Project. (Development of new energy technology)

    Energy Technology Data Exchange (ETDEWEB)

    Takada, T.

    1983-01-01

    Since its inception in 1974, the Sunshine Project has involved advances in new energy technology in many areas. The present report covers the principal areas of activity in 1980, examining the development status of solar energy, goethermal energy, coal liquefaction and gasification, hydrogen energy, wind power, ocean thermal energy conversion, etc. Future trends and tasks of new energy technology development are discussed. (In Japanese)

  14. Progress of Project “The Key Technology Research of Passive Shutdown System for CDFR”

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Passive shutdown technology is one of the key technologies to increase safety performance of larger-size sodium-cooled fast reactors. The objective to the project was to develop the preliminary design of the rod on the basis of theoretic analysis of passive shutdown assembly.

  15. Exploring the Effects of Technology Overload on the Outcomes of Enterprise Resource Planning (ERP) Implementation Projects

    Science.gov (United States)

    Kates, Earl B.

    2016-01-01

    Despite significant investments made by organizations to implement ERP systems and prior research that explored contributing factors of ERP failure, the ERP implementation success rate continues to remain low in practice. Increased technology usage in the workplace coupled with higher dependency on technology to complete project tasks often leads…

  16. PROJECT W-551 INTERIM PRETREATMENT SYSTEM PRECONCEPTUAL CANDIDATE TECHNOLOGY DESCRIPTIONS

    Energy Technology Data Exchange (ETDEWEB)

    MAY TH

    2008-08-12

    The Office of River Protection (ORP) has authorized a study to recommend and select options for interim pretreatment of tank waste and support Waste Treatment Plant (WTP) low activity waste (LAW) operations prior to startup of all the WTP facilities. The Interim Pretreatment System (IPS) is to be a moderately sized system which separates entrained solids and 137Cs from tank waste for an interim time period while WTP high level waste vitrification and pretreatment facilities are completed. This study's objective is to prepare pre-conceptual technology descriptions that expand the technical detail for selected solid and cesium separation technologies. This revision includes information on additional feed tanks.

  17. A project in support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Ki Jung; Choi, Pyong Hoon; Yi, Ji Ho (and others)

    2005-12-15

    Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy informations and computer software developed in the advanced countries. - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate.

  18. Global emission projections for the transportation sector using dynamic technology modeling

    Directory of Open Access Journals (Sweden)

    F. Yan

    2013-09-01

    Full Text Available In this study, global emissions of gases and particles from the transportation sector are projected from the year 2010 to 2050. The Speciated Pollutant Emission Wizard (SPEW-Trend model, a dynamic model that links the emitter population to its emission characteristics, is used to project emissions from on-road vehicles and non-road engines. Unlike previous models of global emission estimates, SPEW-Trend incorporates considerable details on the technology stock and builds explicit relationships between socioeconomic drivers and technological changes, such that the vehicle fleet and the vehicle technology shares change dynamically in response to economic development. Emissions from shipping, aviation, and rail are estimated based on other studies so that the final results encompass the entire transportation sector. The emission projections are driven by four commonly-used IPCC scenarios (A1B, A2, B1, and B2. We project that global fossil-fuel use (oil and coal in the transportation sector will be in the range of 3.0–4.0 Gt across the four scenarios in the year 2030. Corresponding global emissions are projected to be 101–138 Tg of carbon monoxide (CO, 44–54 Tg of nitrogen oxides (NOx, 14–18 Tg of total hydrocarbons (THC, and 3.6–4.4 Tg of particulate matter (PM. At the global level, a common feature of the emission scenarios is a projected decline in emissions during the first one or two decades (2010–2030, because the effects of stringent emission standards offset the growth in fuel use. Emissions increase slightly in some scenarios after 2030, because of the fast growth of on-road vehicles with lax or no emission standards in Africa and increasing emissions from non-road gasoline engines and shipping. On-road vehicles and non-road engines contribute the most to global CO and THC emissions, while on-road vehicles and shipping contribute the most to NOx and PM emissions. At the regional level, Latin America and East Asia are the two

  19. The Chicago Center for Green Technology: life-cycle assessment of a brownfield redevelopment project

    Science.gov (United States)

    Brecheisen, Thomas; Theis, Thomas

    2013-03-01

    The sustainable development of brownfields reflects a fundamental, yet logical, shift in thinking and policymaking regarding pollution prevention. Life-cycle assessment (LCA) is a tool that can be used to assist in determining the conformity of brownfield development projects to the sustainability paradigm. LCA was applied to the process of a real brownfield redevelopment project, now known as the Chicago Center for Green Technology, to determine the cumulative energy required to complete the following redevelopment stages: (1) brownfield assessment and remediation, (2) building rehabilitation and site development and (3) ten years of operation. The results of the LCA have shown that operational energy is the dominant life-cycle stage after ten years of operation. The preservation and rehabilitation of the existing building, the installation of renewable energy systems (geothermal and photovoltaic) on-site and the use of more sustainable building products resulted in 72 terajoules (TJ) of avoided energy impacts, which would provide 14 years of operational energy for the site. Methodological note: data for this life-cycle assessment were obtained from project reports, construction blueprints and utility bills.

  20. Final results of the supra project : Improved Simulation of Upset Recovery

    NARCIS (Netherlands)

    Fucke, L.; Groen, E.; Goman, M.; Abramov, N.; Wentink, M.; Nooij, S.; Zaichik, L.E.; Khrabrov, A.

    2012-01-01

    The objective of the European research project SUPRA (Simulation of Upset Recovery in Aviation) is to develop technologies that eventually contribute to a reduction of risk of Loss of control - in flight (LOC-I) accidents, today's major cause of fatal accidents in commercial aviation. To this end th