Multiple-etalon systems for the Advanced Technology Solar Telescope

Science.gov (United States)

Gary, G. Allen; Balasubramaniam, K. S.; Sigwarth, Michael

2003-01-01

Multiple etalon systems are discussed that meet the science requirements for a narrow-passband imaging system for the 4-meter National Solar Observatory (NSO)/Advance Technology Solar Telescope (ATST). A multiple etalon system can provide an imaging interferometer that works in four distinct modes: as a spectro-polarimeter, a filter-vector magnetograph, an intermediate-band imager, and broadband high-resolution imager. Specific dual and triple etalon configurations are described that provide a spectrographic passband of 2.0-3.5 micron and reduce parasitic light levels to 10(exp -4) as required for precise polarization measurement, e.g., Zeeman measurements of magnetic sensitive lines. A TESOS-like (Telecentric Etalon SOlar Spectrometer) triple etalon system provides a spectral purity of 10(exp -5). The triple designs have the advantage of reducing the finesse requirement on each etalon; allow the use of more stable blocking filters, and have very high spectral purity. A dual-etalon double-pass (Cavallini-like) system can provide a competing configuration. Such a dual-etalon design can provide high contrast. The selection of the final focal plane instrument will depend on a trade-off between an ideal instrument and practical reality. The trade study will include the number of etalons, their aperture sizes, complexities of the optical train, number of blocking filters, configuration of the electronic control system, computer interfaces, temperature controllers, etalon controllers, and their associated feedback electronics. The heritage of single and multiple etalon systems comes from their use in several observatories, including the Marshall Space Flight Center (MSFC) Solar Observatory, Sacramento Peak Observatory (NSO), and Kiepenheuer-Institut fur Sonnenphysik (KIS, Germany), Mees Solar Observatory (University of Hawaii), and Arcetri Astrophysical Observatory (Italy). The design of the ATST multiple etalon system will benefit from the experience gained at these

Camera-based microswitch technology to monitor mouth, eyebrow, and eyelid responses of children with profound multiple disabilities

NARCIS (Netherlands)

Lancioni, G.E.; Bellini, D.; Oliva, D.; Singh, N.N.; O'Reilly, M.F.; Sigafoos, J.; Lang, R.B.; Didden, H.C.M.

2011-01-01

A camera-based microswitch technology was recently used to successfully monitor small eyelid and mouth responses of two adults with profound multiple disabilities (Lancioni et al., Res Dev Disab 31:1509-1514, 2010a). This technology, in contrast with the traditional optic microswitches used for

Effect of Rehabilitation Technology Services on Vocational Rehabilitation Outcomes of Individuals with Multiple Sclerosis

Science.gov (United States)

Chiu, Chung-Yi; Tansey, Timothy N.; Chan, Fong; Strauser, David; Frain, Michael P.; Arora, Simran

2015-01-01

Objectives: To examine the effect of rehabilitation technology interventions on the employment or job retention outcomes of individuals with multiple sclerosis (MS) served by the state-federal vocational rehabilitation program using a case-control study design. Participants: Data for this study were extracted from the Rehabilitation Services…

Some problems of neutron source multiplication method for site measurement technology in nuclear critical safety

International Nuclear Information System (INIS)

Shi Yongqian; Zhu Qingfu; Hu Dingsheng; He Tao; Yao Shigui; Lin Shenghuo

2004-01-01

The paper gives experiment theory and experiment method of neutron source multiplication method for site measurement technology in the nuclear critical safety. The measured parameter by source multiplication method actually is a sub-critical with source neutron effective multiplication factor k s , but not the neutron effective multiplication factor k eff . The experiment research has been done on the uranium solution nuclear critical safety experiment assembly. The k s of different sub-criticality is measured by neutron source multiplication experiment method, and k eff of different sub-criticality, the reactivity coefficient of unit solution level, is first measured by period method, and then multiplied by difference of critical solution level and sub-critical solution level and obtained the reactivity of sub-critical solution level. The k eff finally can be extracted from reactivity formula. The effect on the nuclear critical safety and different between k eff and k s are discussed

Profiles of current speed, direction and other data from ADCP casts from MULTIPLE SHIPS from 01 January 1996 to 25 May 1999 (NODC Accession 9900096)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Profiles of current speed , direction and other data from ADCP casts from MULTIPLE SHIPS. Data were collected by the University of Hawaii at Manoa (UHM) from 01...

An access technology delivery protocol for children with severe and multiple disabilities: a case demonstration.

Science.gov (United States)

Mumford, Leslie; Lam, Rachel; Wright, Virginia; Chau, Tom

2014-08-01

This study applied response efficiency theory to create the Access Technology Delivery Protocol (ATDP), a child and family-centred collaborative approach to the implementation of access technologies. We conducted a descriptive, mixed methods case study to demonstrate the ATDP method with a 12-year-old boy with no reliable means of access to an external device. Evaluations of response efficiency, satisfaction, goal attainment, technology use and participation were made after 8 and 16 weeks of training with a custom smile-based access technology. At the 16 week mark, the new access technology offered better response quality; teacher satisfaction was high; average technology usage was 3-4 times per week for up to 1 h each time; switch sensitivity and specificity reached 78% and 64%, respectively, and participation scores increased by 38%. This case supports further development and testing of the ATDP with additional children with multiple or severe disabilities.

Impact of assisted reproductive technology on the incidence of multiple-gestation infants: a population perspective

NARCIS (Netherlands)

Scholten, Irma; Chambers, Georgina M.; van Loendersloot, Laura; van der Veen, Fulco; Repping, Sjoerd; Gianotten, Judith; Hompes, Peter G. A.; Ledger, William; Mol, Ben W. J.

2015-01-01

To study the value of a population view in assessing assisted reproductive technology (ART) multiple-gestation infants. Descriptive comparison of ART treatment and population statistics in seven developed countries (United States [U.S.], South Korea, United Kingdom, the Netherlands, Australia,

‘Domesticating’ low carbon thermal technologies: Diversity, multiplicity and variability in older person, off grid households

International Nuclear Information System (INIS)

Wrapson, Wendy; Devine-Wright, Patrick

2014-01-01

The uptake of low carbon heating technologies forms an important part of government strategies to reduce carbon emissions. Yet our understanding of why such technologies are adopted and how they are engaged with post-adoption, particularly by older adults living in off-grid areas, is limited. Drawing on a contextualised, socio-technical approach to domestic heating, we present findings from 51 in-depth interviews with a sample of 17 older person households in the South West of England, with ages ranging from 60 to 89 years. Diverse and multiple configurations of heating devices and fuels were found that varied considerably, with some households using five different fuels. The design of the study ensured that approximately half the sample used some form of low carbon thermal technology, such as heat pumps and biomass boilers. Many factors were reported to influence the adoption of low carbon heating; environmental motives were not primary influences and the avoidance of financial risks associated with ‘peak oil’ was expressed. Low carbon thermal technologies were typically integrated into rather than replaced existing heating systems so that valued services provided by conventional technologies could be retained. Implications of the findings for policies to reduce carbon emissions, particularly in older adult, off-grid households, are discussed. - Highlights: • We interviewed 17 households with conventional/low carbon thermal technologies (LCTTs) in South West England. • Older adult, off grid households commonly use multiple, diverse and variable heating technologies and fuels. • Reducing fuel costs was a key reason for installing LCTTs. • LCTTs more commonly were integrated with, rather than replaced, conventional technologies. • Expected reductions in domestic carbon emissions due to LCTTs may not be realised

Communication Opportunities via Special Messaging Technology for Two Post-Coma Persons with Multiple Disabilities

Science.gov (United States)

Lancioni, Giulio E.; O'Reilly, Mark F.; Singh, Nirbhay N.; Sigafoos, Jeff; Buonocunto, Francesca; Sacco, Valentina; Colonna, Fabio; Navarro, Jorge; Lanzilotti, Crocifissa; de Pace, Claudia; Megna, Marisa; Oliva, Doretta

2011-01-01

This study extended the assessment of a special messaging technology with two additional post-coma adults who had emerged from a minimally conscious state, but showed multiple disabilities including profound motor and communication impairments. For each participant, the study involved an ABAB design, in which the A represented baseline phases and…

Persons with Multiple Disabilities Use Orientation Technology to Find Room Entrances during Indoor Traveling

Science.gov (United States)

Lancioni, Giulio E.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Alberti, Gloria; Scigliuzzo, Francesca; Signorino, Mario; Oliva, Doretta; Smaldone, Angela; La Martire, Maria L.

2010-01-01

These two studies assessed adapted orientation technology for promoting correct direction and room identification during indoor traveling by persons with multiple (e.g., sensory, motor and intellectual/adaptive) disabilities. In Study I, two adults were included who had severe visual impairment or total blindness and deafness and used a wheelchair…

W-band power amplifier MMIC with 400 mW output power in 0.1 μm AlGaN/GaN technology

NARCIS (Netherlands)

Heijningen,M. van; Rodenburg, M.; Vliet, F.E. van; Massler, M.; Tessmann, A.; Brückner, F.; Müller, S.; Schwantuschke, D.; Quay; Narhi, T.

2012-01-01

The 0.1 μm AlGaN/GaN technology and design of two W-band power amplifiers in this technology are described. The dual-stage amplifier reaches an output power of 400 mW at 90 GHz at an operation bias of 20 V. Two designs with different driver to final stage gate width ratio are discussed. More than 10

Alopecia in association with lamotrigine use : an analysis of individual case safety reports in a global database

NARCIS (Netherlands)

Tengstrand, Maria; Star, Kristina; van Puijenbroek, Eugène P; Hill, Richard

BACKGROUND: The WHO Programme for International Drug Monitoring, maintained by the Uppsala Monitoring Centre (UMC), has more than 90 member countries contributing individual case safety reports (ICSRs) from their existing national pharmacovigilance systems; these reports are stored in the WHO global

Technologies for Advanced Gait and Balance Assessments in People with Multiple Sclerosis

Directory of Open Access Journals (Sweden)

Camille J. Shanahan

2018-02-01

Full Text Available Subtle gait and balance dysfunction is a precursor to loss of mobility in multiple sclerosis (MS. Biomechanical assessments using advanced gait and balance analysis technologies can identify these subtle changes and could be used to predict mobility loss early in the disease. This update critically evaluates advanced gait and balance analysis technologies and their applicability to identifying early lower limb dysfunction in people with MS. Non-wearable (motion capture systems, force platforms, and sensor-embedded walkways and wearable (pressure and inertial sensors biomechanical analysis systems have been developed to provide quantitative gait and balance assessments. Non-wearable systems are highly accurate, reliable and provide detailed outcomes, but require cumbersome and expensive equipment. Wearable systems provide less detail but can be used in community settings and can provide real-time feedback to patients and clinicians. Biomechanical analysis using advanced gait and balance analysis technologies can identify changes in gait and balance in early MS and consequently have the potential to significantly improve monitoring of mobility changes in MS.

7 CFR 783.8 - Multiple benefits.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Multiple benefits. 783.8 Section 783.8 Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE SPECIAL PROGRAMS TREE ASSISTANCE PROGRAM § 783.8 Multiple benefits. Persons may not receive or retain...

Industrial Application of an Improved Multiple Injection and Multiple Staging Combustion Technology in a 600 MWe Supercritical Down-Fired Boiler.

Science.gov (United States)

Song, Minhang; Zeng, Lingyan; Chen, Zhichao; Li, Zhengqi; Zhu, Qunyi; Kuang, Min

2016-02-02

To solve the water wall overheating in lower furnace, and further reduce NOx emissions and carbon in fly ash, continuous improvement of the previously proposed multiple injection and multiple staging combustion (MIMSC) technology lies on three aspects: (1) along the furnace arch breadth, changing the previously centralized 12 burner groups into a more uniform pattern with 24 burners; (2) increasing the mass ratio of pulverized coal in fuel-rich flow to that in fuel-lean flow from 6:4 to 9:1; (3) reducing the arch-air momentum by 23% and increasing the tertiary-air momentum by 24%. Industrial-size measurements (i.e., adjusting overfire air (OFA) damper opening of 20-70%) uncovered that, compared with the prior MIMSC technology, the ignition distance of fuel-rich coal/air flow shortened by around 1 m. The gas temperature in the lower furnace was symmetric and higher, the flame kernel moved upward and therefore made the temperature in near-wall region of furnace hopper decrease by about 400 °C, the water wall overheating disappeared completely. Under the optimal OFA damper opening (i.e, 55%), NOx emissions and carbon in fly ash attained levels of 589 mg/m(3) at 6% O2 and 6.18%, respectively, achieving NOx and carbon in fly ash significant reduction by 33% and 37%, respectively.

Teaching Technology: From Knowing to Feeling Enhancing Emotional and Content Acquisition Performance through Gardner's Multiple Intelligences Theory in Technology and Design Lessons

Science.gov (United States)

Sanchez-Martin, Jesus; Alvarez-Gragera, Garcia J.; Davila-Acedo, Maria Antonia; Mellado, Vicente

2017-01-01

Gardner's Multiple Intelligences Theory (MIT) can be a cognitive and emotional improvement if is taken into account in the standard development of the Technology lessons. This work presents a preliminary evaluation of the performance enhancement in two concomitant aspects: contents acquisition and emotional yield. The study was made on up to 150…

9 CFR 113.7 - Multiple fractions.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Multiple fractions. 113.7 Section 113... § 113.7 Multiple fractions. (a) When a biological product contains more than one immunogenic fraction, the completed product shall be evaluated by tests applicable to each fraction. (b) When similar...

7 CFR 1437.13 - Multiple benefits.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Multiple benefits. 1437.13 Section 1437.13... General Provisions § 1437.13 Multiple benefits. (a) If a producer is eligible to receive payments under this part and benefits under any other program administered by the Secretary for the same crop loss...

FASTSAT-HSV01 Thermal Math Model Correlation

Science.gov (United States)

McKelvey, Callie

2011-01-01

This paper summarizes the thermal math model correlation effort for the Fast Affordable Science and Technology SATellite (FASTSAT-HSV01), which was designed, built and tested by NASA's Marshall Space Flight Center (MSFC) and multiple partners. The satellite launched in November 2010 on a Minotaur IV rocket from the Kodiak Launch Complex in Kodiak, Alaska. It carried three Earth science experiments and two technology demonstrations into a low Earth circular orbit with an inclination of 72deg and an altitude of 650 kilometers. The mission has been successful to date with science experiment activities still taking place daily. The thermal control system on this spacecraft was a passive design relying on thermo-optical properties and six heaters placed on specific components. Flight temperature data is being recorded every minute from the 48 Resistance Temperature Devices (RTDs) onboard the satellite structure and many of its avionics boxes. An effort has been made to correlate the thermal math model to the flight temperature data using Cullimore and Ring's Thermal Desktop and by obtaining Earth and Sun vector data from the Attitude Control System (ACS) team to create an "as-flown" orbit. Several model parameters were studied during this task to understand the spacecraft's sensitivity to these changes. Many "lessons learned" have been noted from this activity that will be directly applicable to future small satellite programs.

Constructing a multiple choice test to measure elementary school teachers' Pedagogical Content Knowledge of technology education.

NARCIS (Netherlands)

Rohaan, E.J.; Taconis, R.; Jochems, W.M.G.

2009-01-01

This paper describes the construction and validation of a multiple choice test to measure elementary school teachers' Pedagogical Content Knowledge of technology education. Pedagogical Content Knowledge is generally accepted to be a crucial domain of teacher knowledge and is, therefore, an important

NCBI nr-aa BLAST: CBRC-DNOV-01-2378 [SEVENS

Lifescience Database Archive (English)

Full Text Available CBRC-DNOV-01-2378 ref|NP_325931.1| MULTIPLE SUGAR ABC TRANSPORTER PERMEASE PROTEIN ...[Mycoplasma pulmonis UAB CTIP] emb|CAC13273.1| MULTIPLE SUGAR ABC TRANSPORTER PERMEASE PROTEIN [Mycoplasma pulmonis] NP_325931.1 0.090 22% ...

WATER TEMPERATURE and other data from MULTIPLE SHIPS from 1983-01-01 to 1992-12-31 (NODC Accession 9400224)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This accession contains data collected as part of Shipboard Environmental data Acquisition System (SEAS) II program. The cruises were conducted using multiple ships....

Post-Coma Persons with Extensive Multiple Disabilities Use Microswitch Technology to Access Selected Stimulus Events or Operate a Radio Device

Science.gov (United States)

Lancioni, Giulio E.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Alberti, Gloria; Oliva, Doretta; Megna, Gianfranco; Iliceto, Carla; Damiani, Sabino; Ricci, Irene; Spica, Antonella

2011-01-01

The present two studies extended research evidence on the use of microswitch technology by post-coma persons with multiple disabilities. Specifically, Study I examined whether three adults with a diagnosis of minimally conscious state and multiple disabilities could use microswitches as tools to access brief, selected stimulus events. Study II…

Two Persons with Multiple Disabilities Use Orientation Technology with Auditory Cues to Manage Simple Indoor Traveling

Science.gov (United States)

Lancioni, Giulio E.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Campodonico, Francesca; Oliva, Doretta

2010-01-01

This study was an effort to extend the evaluation of orientation technology for promoting independent indoor traveling in persons with multiple disabilities. Two participants (adults) were included, who were to travel to activity destinations within occupational settings. The orientation system involved (a) cueing sources only at the destinations…

TH-C-BRC-01: An Overview of Emerging Technologies in SRS/SBRT Delivery

International Nuclear Information System (INIS)

Ma, L.

2016-01-01

deliver highly conformal radiosurgery treatments to multiple targets simultaneously via a single isocenter to replace the conventional multi-iso multi-plan treatments. It becomes important to understand the advantages and limitations of this technique, and the pitfalls for implementing this technique in clinical practice. The planning process of single-iso multi-target MAT will be described, and its plan quality and delivery efficiency will be compared with multi-iso plans. The QA process for verifying such complex plans will be illustrated, and pitfalls in imaging and patient set up will be discussed. Overall, this session will focus on the following areas: 1) Update on the emerging technology in current SRS/SBRT delivery. 2) New developments in treatment planning and Quality Assurance program. 3) Imaging guidance and motion management. Learning Objectives: To understand the SRS/SBRT principles and its clinical applications, and gain knowledge on the emerging technologies in SRS/SBRT. To review planning concepts and useful tips in treatment planning. To learn about the imaging guidance procedures and the quality assurance program in SRS/SBRT. National Institutes of Health, Varian Medical System; L. Ren, The presenter is funded by National Institutes of Health and Varian Medical System.

TH-C-BRC-01: An Overview of Emerging Technologies in SRS/SBRT Delivery

Energy Technology Data Exchange (ETDEWEB)

Ma, L. [UCSF Comprehensive Cancer Center, San Francisco, CA (United States)

2016-06-15

deliver highly conformal radiosurgery treatments to multiple targets simultaneously via a single isocenter to replace the conventional multi-iso multi-plan treatments. It becomes important to understand the advantages and limitations of this technique, and the pitfalls for implementing this technique in clinical practice. The planning process of single-iso multi-target MAT will be described, and its plan quality and delivery efficiency will be compared with multi-iso plans. The QA process for verifying such complex plans will be illustrated, and pitfalls in imaging and patient set up will be discussed. Overall, this session will focus on the following areas: 1) Update on the emerging technology in current SRS/SBRT delivery. 2) New developments in treatment planning and Quality Assurance program. 3) Imaging guidance and motion management. Learning Objectives: To understand the SRS/SBRT principles and its clinical applications, and gain knowledge on the emerging technologies in SRS/SBRT. To review planning concepts and useful tips in treatment planning. To learn about the imaging guidance procedures and the quality assurance program in SRS/SBRT. National Institutes of Health, Varian Medical System; L. Ren, The presenter is funded by National Institutes of Health and Varian Medical System.

Multiple behavior changes in diet and activity: a randomized controlled trial using mobile technology.

Science.gov (United States)

Spring, Bonnie; Schneider, Kristin; McFadden, H Gene; Vaughn, Jocelyn; Kozak, Andrea T; Smith, Malaina; Moller, Arlen C; Epstein, Leonard H; Demott, Andrew; Hedeker, Donald; Siddique, Juned; Lloyd-Jones, Donald M

2012-05-28

Many patients exhibit multiple chronic disease risk behaviors. Research provides little information about advice that can maximize simultaneous health behavior changes. To test which combination of diet and activity advice maximizes healthy change, we randomized 204 adults with elevated saturated fat and low fruit and vegetable intake, high sedentary leisure time, and low physical activity to 1 of 4 treatments: increase fruit/vegetable intake and physical activity, decrease fat and sedentary leisure, decrease fat and increase physical activity, and increase fruit/vegetable intake and decrease sedentary leisure. Treatments provided 3 weeks of remote coaching supported by mobile decision support technology and financial incentives. During treatment, incentives were contingent on using the mobile device to self-monitor and attain behavioral targets; during follow-up, incentives were contingent only on recording. The outcome was standardized, composite improvement on the 4 diet and activity behaviors at the end of treatment and at 5-month follow-up. Of the 204 individuals randomized, 200 (98.0%) completed follow-up. The increase fruits/vegetables and decrease sedentary leisure treatments improved more than the other 3 treatments (P improved less than the other 3 treatments (P mobile technology and financial incentives holds promise to improve diet and activity. Targeting fruits/vegetables and sedentary leisure together maximizes overall adoption and maintenance of multiple healthy behavior changes.

12 CFR 583.12 - Multiple savings and loan holding company.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Multiple savings and loan holding company. 583... DEFINITIONS FOR REGULATIONS AFFECTING SAVINGS AND LOAN HOLDING COMPANIES § 583.12 Multiple savings and loan holding company. The term multiple savings and loan holding company means any savings and loan holding...

10 CFR 63.115 - Requirements for multiple barriers.

Science.gov (United States)

2010-01-01

... Requirements for multiple barriers. Demonstration of compliance with § 63.113(a) must: (a) Identify those design features of the engineered barrier system, and natural features of the geologic setting, that are... 10 Energy 2 2010-01-01 2010-01-01 false Requirements for multiple barriers. 63.115 Section 63.115...

Cancer Caregiver: Perceived Benefits of Technology.

Science.gov (United States)

Lapid, Maria I; Atherton, Pamela J; Clark, Matthew M; Kung, Simon; Sloan, Jeff A; Rummans, Teresa A

2015-11-01

The burden associated with caregiving has been well documented. Caregivers have multiple responsibilities, and technology may be accessible as a potential burden-alleviating resource. We surveyed cancer caregivers regarding current technology use and willingness to use technology for easing burden or distress. Because age has been associated with technology use, responses were compared between geriatric (≥65 years old) and nongeriatric (18-64 years old) caregivers. We had 112 respondents. Based on nonmissing responses, 66% (n=71) were women, 95% (n=106) were white, and 84% (n=91) had post-high school education. Almost all caregivers reported having Internet (105 [94%]) and e-mail (102 [91%]) access. Nongeriatric caregivers indicated more willingness to access Internet-based tools that help caregivers (54 [93%] versus 41 [76%]; p=0.04) and were more frequent users of social media (37 [64%] versus 16 [30%]; p=0.01), smartphones (33 [57%] versus 16 [30%]; p=0.01), and other mobile wireless devices (42 [72%] versus 19 [35%]; p<0.001) than geriatric caregivers. They also more frequently expected technologies to improve their own quality of life (p=0.009), increase their feelings of being effective as a caregiver (p=0.02), and save time (p=0.003). Regardless of age, a majority of caregivers (67 [62%]) endorsed the potential benefit of caregiving technologies in preventing burnout. Most caregivers have high access to and use of technology. Geriatric and nongeriatric caregivers were receptive to technology-based tools to help with their caregiving roles. Although nongeriatric caregivers expected to derive more benefit from such tools, both groups believed that caregiving technologies could reduce burden.

Different DRB1*03:01-DQB1*02:01 haplotypes confer different risk for celiac disease.

Science.gov (United States)

Alshiekh, S; Zhao, L P; Lernmark, Å; Geraghty, D E; Naluai, Å T; Agardh, D

2017-08-01

Celiac disease is associated with the HLA-DR3-DQA1*05:01-DQB1*02:01 and DR4-DQA1*03:01-DQB1*03:02 haplotypes. In addition, there are currently over 40 non-HLA loci associated with celiac disease. This study extends previous analyses on different HLA haplotypes in celiac disease using next generation targeted sequencing. Included were 143 patients with celiac disease and 135 non-celiac disease controls investigated at median 9.8 years (1.4-18.3 years). PCR-based amplification of HLA and sequencing with Illumina MiSeq technology were used for extended sequencing of the HLA class II haplotypes HLA-DRB1, DRB3, DRB4, DRB5, DQA1 and DQB1, respectively. Odds ratios were computed marginally for every allele and haplotype as the ratio of allelic frequency in patients and controls as ratio of exposure rates (RR), when comparing a null reference with equal exposure rates in cases and controls. Among the extended HLA haplotypes, the strongest risk haplotype for celiac disease was shown for DRB3*01:01:02 in linkage with DQA1*05:01-DQB1*02:01 (RR = 6.34; P-value celiac disease among non-Scandinavians (RR = 7.94; P = .011). The data also revealed 2 distinct celiac disease risk DR3-DQA1*05:01-DQB*02:01 haplotypes distinguished by either the DRB3*01:01:02 or DRB3*02:02:01 alleles, indicating that different DRB1*03:01-DQB1*02:01 haplotypes confer different risk for celiac disease. The associated risk of celiac disease for DR3-DRB3*01:01:02-DQA1*05:01-DQB1*02:01 is predominant among patients of Scandinavian ethnicity. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Adverse reactions to contrast media: an analysis of spontaneous reports in the database of the pharmacovigilance programme of India.

Science.gov (United States)

Kalaiselvan, Vivekanandan; Sharma, Surbhi; Singh, Gyanendra Nath

2014-09-01

Contrast media are used widely to improve medical imaging. Like all other pharmaceuticals, these agents are not completely devoid of risk, and continuous monitoring of adverse reactions with these agents is important. Spontaneous reporting is the simplest method for understanding the safety profile of pharmaceutical products after their approval. Our objective was to identify the pattern and characteristics of adverse reactions attributed to contrast media in the Indian population reported to the National Coordination Centre for the Pharmacovigilance Programme of India (NCC-PvPI). Individual case safety reports (ICSRs) attributed to contrast media submitted spontaneously to the NCC-PvPI were extracted from the database for July 2010 to September 2013. We analysed these reports for information related to reporter's professional category, patient's age and sex, reporter's diagnosis of the reaction, seriousness of the reaction, type of contrast media exposure, system organ class (SOC) affected (as described in World Health Organization Adverse Reaction Terminology [WHO-ART]) and outcome. Of the total 59,915 ICSRs in the database, 415 (0.7%) were suspected adverse reactions to contrast media; 44 reports were serious, including three fatal cases. The most affected SOCs were skin and appendage disorders, body as a whole-general disorders, gastrointestinal system disorders and respiratory system disorders. Hypersensitivity reactions were reported in the majority of ICSRs. The contrast media with the highest number of reports were iohexol (40.7%), iomeprol (17.8%), iopamidol (12%) and diatrizoate (12%). Most of the reactions to contrast media were allergic-like, and no previously unrecognised adverse reactions were observed in the Indian population. Further data and increased awareness among healthcare professionals is required to signal and prevent the consequences of adverse reactions attributed to contrast media.

Pharmacovigilance activities in ASEAN countries.

Science.gov (United States)

Suwankesawong, Wimon; Dhippayom, Teerapon; Tan-Koi, Wei-Chuen; Kongkaew, Chuenjid

2016-09-01

This study aimed to explore the current landscape and identify challenges of pharmacovigilance (PV) among Association of Southeast Asian Nations (ASEAN) countries. This cross-sectional survey collected data from May 2014 to December 2015. Questionnaires seeking to collect information on resources, processes, roles and responsibility, and functions of PV systems were sent to relevant persons in the ASEAN countries. Functions of PV centers were measured using the minimum World Health Organization requirements for a functional national PV system. Performances of PV centers were measured by the following: (1) the indicators related to the average number of individual case safety reports (ICSR); (2) presence of signal detection activities and subsequent action; and (3) contribution to the global vigilance database. Cambodia, Indonesia, Laos, Malaysia, the Philippines, Singapore, Thailand, and Vietnam completed the survey. PV systems in four surveyed countries (Indonesia, Malaysia, Singapore, and Thailand) achieved all aspects of the World Health Organization minimum requirement for a functional national PV system; the remaining countries were deemed to have unclear communication strategies and/or no official advisory committee. Average numbers of recent ICSR national returns ranged from 7 to 3817 reports/year/million population; three countries (Malaysia, Singapore, and Thailand) demonstrated good performance in reporting system and reported signal detection activities and subsequent actions. All participating countries had submitted ICSRs to the Uppsala Monitoring Center during the survey period (2013-2015). Four participating countries had functional PV systems. PV capacity, functionality, and legislative framework varied depending on local healthcare ecosystem networks. Implementing effective communication strategies and/or technical assistance from the advisory committee are needed to strengthen PV in ASEAN. Copyright © 2016 John Wiley & Sons, Ltd. Copyright �

The theory of multiple stupidities: education, technology and organisation in Arabia.

Science.gov (United States)

Al Lily, Abdulrahman Essa; Alhazmi, Ahmed Ali; Alzahrani, Saleh

2017-11-01

Traditional perspectives have envisaged intelligence as one entity dominated by a single set of abilities (i.e. cognitive abilities), whereas modern perspectives have defined intelligence in various shapes (e.g. linguistic, musical and interpersonal intelligences). By the same token, traditional perspectives have examined stupidity as one set of inabilities (i.e. cognitive inabilities). However, it is not clear whether modern perspectives have discussed whether stupidity exists in various forms-in the same way as they have envisaged intelligence. To address this limitation, 257 university members were asked to share what they perceived as being stupid educational and technological practices in their institutions. Analysis of the data suggested three concepts were important to the members: moral, spatial and administrative stupidities. That is, stupidity is perceived to come in the form of failing to meet certain moral, spatial and administrative values. This implies that modern perspectives may conceptualise stupidity differently from traditional perspectives, seeing it as going beyond cognitive inabilities and viewing it as existing in various forms (e.g. moral, spatial and administrative stupidities). Thus, there are multiple stupidities as there are multiple forms of intelligence. A strength of this research is that it views stupidity through an organisational and qualitative lens, although some may traditionally expect such a topic to be examined quantitatively through psychometric and biological approaches.

A Robust Two-Phase Pumped Loop With Multiple Evaporators and Multiple Radiators, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — NASA's future spacecraft require advanced thermal management technologies to provide effective cooling for multiple instruments and reject heat through multiple...

Technology-Enhanced Peer Review: Benefits and Implications of Providing Multiple Reviews

DEFF Research Database (Denmark)

Papadopoulos, Pantelis M.; Lagkas, Thomas D.; Demetriadis, Stavros N.

2017-01-01

This study analyses the impact of self and peer feedback in technology-enhanced peer review settings. The impact of receiving peer comments (“receiver” perspective) is compared to that of reaching own insights by reviewing others’ work (“giver” perspective). In this study, 38 sophomore students...... were randomly assigned in two conditions and engaged in peer review activity facilitated by a web-based learning environment asking them to provide multiple reviews. In the Peer Reviewed (PR) condition students both reviewed peer work and received peer comments for their own work. By contrast......, in the Self Reviewed (SR) condition students provided peer reviews, but did not receive any. Instead, they were asked to perform self reviewing, before proceeding to any revisions of their work. Result showed that the two groups were comparable in all aspects, suggesting that the lack of getting peer reviews...

14 CFR 1260.57 - New technology.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false New technology. 1260.57 Section 1260.57... Special Conditions § 1260.57 New technology. New Technology October 2000 (a) Definitions. Administrator... and disclosed to Recipient personnel responsible for the administration of this New Technology special...

15 CFR 742.5 - Missile technology.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Missile technology. 742.5 Section 742... BASED CONTROLS § 742.5 Missile technology. (a) License requirements. (1) In support of U.S. foreign... establish the existence of a contract. (d) Missile Technology Control Regime. Missile Technology Control...

A novel RE-chrome-boronizing technology assisted by fast multiple rotation rolling treatment at low temperature

Energy Technology Data Exchange (ETDEWEB)

Yuan, Xing-dong [School of Materials Science and Engineering, Shandong University, Jinan 250061 (China); School of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 (China); Xu, Bin, E-mail: xubin@sdjzu.edu.cn [School of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 (China); Cai, Yu-cheng [School of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 (China)

2015-12-01

Highlights: • A nanostructured layer with grain size of approximately 30 nm was successfully fabricated in the upper-layer of carbon steel. • The penetrating rate was enhanced significantly by the fast multiple rotation rolling (FMRR) treatment at low temperature. • A novel and efficient RE-Chrome-Boronizing technology assisted by fast multiple rotation rolling (FMRR) treatment at low temperature was used to fabricate boride layers on the surface of carbon steel. - Abstract: The boride layer was fabricated on the surface of carbon steel by a novel RE-Chrome-Boronizing technology assisted by fast multiple rotation rolling (FMRR) treatment at low temperature. The microstructure of the boride layer was characterized by using scanning electron microscopy (SEM). The microstructure of the top surface layer of substrate was characterized by transmission electron microscopy (TEM) and high resolution rransmission electron microscopy (HRTEM). Experimental results showed that a nanostructured layer with grain size of approximately 30 nm was obtained; the amorphous phase and high-density dislocations were observed in upper-layer of FMRR samples, which led to the reduction of diffusion activation energy of boron atoms. Boride layers fabricated on the FMRR samples are continuous, dense, uniform, and low in brittleness. The penetrating rate was enhanced significantly when the FMRR samples were Cr-Rare earth-boronized at 650 °C for 6 h. The thickness of the boride layer of FMRR samples on carbon steel was approximately 25 μm when the duration was 60 min, which was approximately 1.5 times higher than the original sample. The boride layer consisted of mainly Fe2B, and adheres well to the metallic substrate.

System and method for design and optimization of grid connected photovoltaic power plant with multiple photovoltaic module technologies

Science.gov (United States)

Thomas, Bex George; Elasser, Ahmed; Bollapragada, Srinivas; Galbraith, Anthony William; Agamy, Mohammed; Garifullin, Maxim Valeryevich

2016-03-29

A system and method of using one or more DC-DC/DC-AC converters and/or alternative devices allows strings of multiple module technologies to coexist within the same PV power plant. A computing (optimization) framework estimates the percentage allocation of PV power plant capacity to selected PV module technologies. The framework and its supporting components considers irradiation, temperature, spectral profiles, cost and other practical constraints to achieve the lowest levelized cost of electricity, maximum output and minimum system cost. The system and method can function using any device enabling distributed maximum power point tracking at the module, string or combiner level.

TU-PIS-Exhibit Hall-01: CT Dose Optimization Technologies II

International Nuclear Information System (INIS)

Driesser, I; Angel, E

2014-01-01

Partners in Solutions is an exciting new program in which AAPM partners with our vendors to present practical “hands-on” information about the equipment and software systems that we use in our clinics. The imaging topic this year is CT scanner dose optimization capabilities. Note that the sessions are being held in a special purpose room built on the Exhibit Hall Floor, to encourage further interaction with the vendors. Siemens‘ Commitment to the Right Dose in Computed Tomography Presentation Time: 11:15 - 11:45 AM Providing sustainable clinical results at highest patient safety: This is the challenge in medical imaging. Especially for Computed Tomography this means applying not simply the lowest, but the right dose for sound diagnostic imaging. Consequently, Siemens is committed to deliver the right dose in CT. In order to reduce radiation to the right dose, the first step is to provide the right dose technology. Through decades of research and development in CT imaging, Siemens CT has constantly introduced new ideas leading to a comprehensive portfolio of unique CARE technologies to deliver the right dose. For example automated kV adjustment based on patient size and the clinical question with CARE kV and three generations of iterative reconstruction. Based on the right dose technology, the next step is to actually scan at the right dose. For this, it is key to know the right dose targets for every examination. Siemens continuously involves CT experts to push developments further and outline how users can best adapt their procedures to the right dose. For users to know whether they met the right dose targets, it is therefore important to understand and monitor the actual absolute dose values. All scanners are delivered with defined default protocols which automatically use the available right dose technologies. Finally, to deliver the right dose not just in singular cases, but ideally to patients everywhere, organizations need then to manage dose across

Experimental Conditions: SE48_S01_M01_D01 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available structure elucidation of 36 specialized metabolites from Oryza sativa (rice) by using MS/MS and NMR analyse...s SE48_S01 Habataki SE48_S01_M01 1 μL SE48_MS01 LC–QTOF-MS/MS analysis SE48_DS01 Data upload Default SE48_AM01 SE48_SS01 Isolation of specialized metabolites ...

Theoretical study of the adsorption of rhodium on a TiO{sub 2}(1 1 0)-1 Multiplication-Sign 1 surface

Energy Technology Data Exchange (ETDEWEB)

Mutombo, P., E-mail: mutombo@fzu.cz [Institute of Physics of Academy of Sciences of the Czech Republic, Cukrovarnicka 10, 16253 Praha 6 (Czech Republic); Balazs, N. [Reaction Kinetics Laboratory, Institute of Nanochemistry and Catalysis, CRC of the Hungarian Academy of Sciences, University of Szeged, P.O. Box 168, H-6701 Szeged (Hungary); Majzik, Z. [Institute of Physics of Academy of Sciences of the Czech Republic, Cukrovarnicka 10, 16253 Praha 6 (Czech Republic); Reaction Kinetics Laboratory, Institute of Nanochemistry and Catalysis, CRC of the Hungarian Academy of Sciences, University of Szeged, P.O. Box 168, H-6701 Szeged (Hungary); Berko, A. [Reaction Kinetics Laboratory, Institute of Nanochemistry and Catalysis, CRC of the Hungarian Academy of Sciences, University of Szeged, P.O. Box 168, H-6701 Szeged (Hungary); Chab, V. [Institute of Physics of Academy of Sciences of the Czech Republic, Cukrovarnicka 10, 16253 Praha 6 (Czech Republic)

2012-03-01

Density functional theory (DFT) calculations were used to study the adsorption of rhodium on a TiO{sub 2}(1 1 0)-1 Multiplication-Sign 1 surface as a function of coverage. It was found that Rh atom prefers the hollow site between a bridging oxygen atom, a threefold oxygen atom and a fivefold coordinated Ti atom, regardless of the coverage used. DFT calculations also suggest that Rh-Rh interaction is attractive along the [0 0 1] direction, implying that the Rh 1D nanostructure should grow preferentially along this direction. Simulated Rh dimer clusters resemble strongly Pd dimers resolved in STM experiments suggesting that both metals occupy the same adsorption site at the TiO{sub 2}(1 1 0) surface.

Experimental Conditions: SE51_S01_M01_D01 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available SE51_S01_M01_D01 SE51 RIKEN tandem mass spectral database (ReSpect) for phytochemic...als: A plant-specific MS/MS-based data resource and database SE51_S01 L. japonicus accessions SE51_S01_M01 N

FASTSAT-HSV01 Synergistic Observations of the Magnetospheric Response During Active Periods: MINI-ME, PISA and TTI

Science.gov (United States)

Casas, Joseph C.; Collier, Michael R.; Rowland, Douglas E.; Sigwarth, John B.; Boudreaux, Mark E.

2010-01-01

Understanding the complex processes within the inner magnetosphere of Earth particularly during storm periods requires coordinated observations of the particle and field environment using both in-situ and remote sensing techniques. In fact in order to gain a better understanding of our Heliophysics and potentially improve our space weather forecasting capabilities, new observation mission approaches and new instrument technologies which can provide both cost effective and robust regular observations of magnetospheric activity and other space weather related phenomenon are necessary. As part of the effort to demonstrate new instrument techniques and achieve necessary coordinated observation missions, NASA's Fast Affordable Science and Technology Satellite Huntsville 01 mission (FASTSAT-HSVOI) scheduled for launch in 2010 will afford a highly synergistic solution which satisfies payload mission opportunities and launch requirements as well as contributing iri the near term to our improved understanding of Heliophysics. NASA's FASTSAT-HSV01 spacecraft on the DoD Space Test Program-S26 (STP-S26) Mission is a multi-payload mission executed by the DoD Space Test Program (STP) at the Space Development and Test Wing (SDTW), Kirtland AFB, NM. and is an example of a responsive and economical breakthrough in providing new possibilities for small space technology-driven and research missions. FASTSAT-HSV is a unique spacecraft platform that can carry multiple small instruments or experiments to low-Earth orbit on a wide range of expendable launch vehicles for a fraction of the cost traditionally required for such missions. The FASTSAT-HSV01 mission allows NASA to mature and transition a technical capability to industry while increasing low-cost access to space for small science and technology (ST) payloads. The FASTSAT-HSV01 payload includes three NASA Goddard Space Flight Center (GSFC) new technology built instruments that will study the terrestrial space environment and

Neutron-multiplication measurement instrument

Energy Technology Data Exchange (ETDEWEB)

Nixon, K.V.; Dowdy, E.J.; France, S.W.; Millegan, D.R.; Robba, A.A.

1982-01-01

The Advanced Nuclear Technology Group of the Los Alamos National Laboratory is now using intelligent data-acquisition and analysis instrumentation for determining the multiplication of nuclear material. Earlier instrumentation, such as the large NIM-crate systems, depended on house power and required additional computation to determine multiplication or to estimate error. The portable, battery-powered multiplication measurement unit, with advanced computational power, acquires data, calculates multiplication, and completes error analysis automatically. Thus, the multiplication is determined easily and an available error estimate enables the user to judge the significance of results.

Neutron multiplication measurement instrument

International Nuclear Information System (INIS)

Nixon, K.V.; Dowdy, E.J.; France, S.W.; Millegan, D.R.; Robba, A.A.

1983-01-01

The Advanced Nuclear Technology Group of the Los Alamos National Laboratory is now using intelligent data-acquisition and analysis instrumentation for determining the multiplication of nuclear material. Earlier instrumentation, such as the large NIM-crate systems, depended on house power and required additional computation to determine multiplication or to estimate error. The portable, battery-powered multiplication measurement unit, with advanced computational power, acquires data, calculates multiplication, and completes error analysis automatically. Thus, the multiplication is determined easily and an available error estimate enables the user to judge the significance of results

Neutron-multiplication measurement instrument

International Nuclear Information System (INIS)

Nixon, K.V.; Dowdy, E.J.; France, S.W.; Millegan, D.R.; Robba, A.A.

1982-01-01

The Advanced Nuclear Technology Group of the Los Alamos National Laboratory is now using intelligent data-acquisition and analysis instrumentation for determining the multiplication of nuclear material. Earlier instrumentation, such as the large NIM-crate systems, depended on house power and required additional computation to determine multiplication or to estimate error. The portable, battery-powered multiplication measurement unit, with advanced computational power, acquires data, calculates multiplication, and completes error analysis automatically. Thus, the multiplication is determined easily and an available error estimate enables the user to judge the significance of results

Extending technology-aided leisure and communication programs to persons with spinal cord injury and post-coma multiple disabilities.

Science.gov (United States)

Lancioni, Giulio E; Singh, Nirbhay N; O'Reilly, Mark F; Sigafoos, Jeff; Ricciuti, Riccardo A; Trignani, Roberto; Oliva, Doretta; Signorino, Mario; D'Amico, Fiora; Sasanelli, Giovanni

2015-01-01

These two studies extended technology-aided programs to promote leisure and communication opportunities to a man with cervical spinal cord injury and a post-coma man with multiple disabilities. The studies involved the use of ABAB designs, in which A and B represented baseline and intervention phases, respectively. The programs focused on enabling the participants to activate songs, videos, requests, text messages, and telephone calls. These options were presented on a computer screen and activated through a small pressure microswitch by the man with spinal cord injury and a special touch screen by the post-coma man. To help the latter participant, who had no verbal skills, with requests and telephone calls, series of words and phrases were made available that he could activate in those situations. Data showed that both participants were successful in managing the programs arranged for them. The man with spinal cord injury activated mean frequencies of above five options per 10-min session. The post-coma man activated mean frequencies of about 12 options per 20-min session. Technology-aided programs for promoting leisure and communication opportunities might be successfully tailored to persons with spinal cord injury and persons with post-coma multiple disabilities. Implications for Rehabilitation Technology-aided programs may be critical to enable persons with pervasive motor impairment to engage in leisure activities and communication events independently. Persons with spinal cord injury, post-coma extended brain damage, and forms of neurodegenerative disease, such as amyotrophic lateral sclerosis, may benefit from those programs. The programs could be adapted to the participants' characteristics, both in terms of technology and contents, so as to improve their overall impact on the participants' functioning and general mood.

Analysis of multiple types of human cells subsequent to bioprinting with electrospraying technology.

Science.gov (United States)

Xin, Yu; Chai, Gang; Zhang, Ting; Wang, Xiangsheng; Qu, Miao; Tan, Andy; Bogari, Melia; Zhu, Ming; Lin, Li; Hu, Qingxi; Liu, Yuanyuan; Zhang, Yan

2016-12-01

The aim of the present study was to investigate bioprinting with electrospraying technology using multiple types of human cell suspensions as bio-ink, in order to lay the initial foundations for the application of the bioprinting technology in tissue engineering. In the current study, six types of human cells were selected and cultured, including human fibroblasts, human adipose-derived stem cells (hADSCs), human periodontal ligament cells (HPDLCs), adult human retinal pigment epithelial cells (ARPE-19), human umbilical vascular endothelial cells (HUVECs) and human gastric epithelial cell line (GES-1). Each cell type was divided into two groups, the experimental and control group. All the experimental group cells were electrosprayed using an electrospraying printer (voltage, 15 kV; flow rate, 150 µl/min) and collected in a petri dish placed 15 cm away from the needle (needle diameter, 0.5 mm). Subsequently, cell viability was detected by flow cytometry with a Live/Dead Viability kit. In addition, the cell morphological characteristics were observed with a phase-contrast microscope after 6 h of culturing in order to obtain adherent cells, while cell proliferation was analyzed using a Cell Counting Kit-8 assay. The control groups, without printing, were subjected to the same procedures as the experimental groups. The results of the cell viability and proliferation assays indicated a statistically significant difference after printing between the experiments and control groups only for the hADSCs (P0.05). In addition, there were no observable differences between all experimental and the control groups at any examined time point in the terms of cell morphological characteristics. In conclusion, bioprinting based on electrospraying technology demonstrated no distinct negative effect on cell vitality, proliferation and morphology in the present study, and thus the application of this novel technology to cell printing may provide a promising method in tissue engineering.

Quantitative Analysis of Complex Multiple-Choice Items in Science Technology and Society: Item Scaling

Directory of Open Access Journals (Sweden)

Ángel Vázquez Alonso

2005-05-01

Full Text Available The scarce attention to assessment and evaluation in science education research has been especially harmful for Science-Technology-Society (STS education, due to the dialectic, tentative, value-laden, and controversial nature of most STS topics. To overcome the methodological pitfalls of the STS assessment instruments used in the past, an empirically developed instrument (VOSTS, Views on Science-Technology-Society have been suggested. Some methodological proposals, namely the multiple response models and the computing of a global attitudinal index, were suggested to improve the item implementation. The final step of these methodological proposals requires the categorization of STS statements. This paper describes the process of categorization through a scaling procedure ruled by a panel of experts, acting as judges, according to the body of knowledge from history, epistemology, and sociology of science. The statement categorization allows for the sound foundation of STS items, which is useful in educational assessment and science education research, and may also increase teachers’ self-confidence in the development of the STS curriculum for science classrooms.

Low-Power, Rad-hard Reconfigurable, Bi-directional Flexfet™ Level Shifter ReBiLS for Multiple Generation Technology Integration for Space Exploration, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The many different generations of integrated circuit (IC) technologies required for new space exploration systems demand designs operate at multiple and often...

Advanced Communication Technology Satellite (ACTS) multibeam antenna technology verification experiments

Science.gov (United States)

Acosta, Roberto J.; Larko, Jeffrey M.; Lagin, Alan R.

1992-01-01

The Advanced Communication Technology Satellite (ACTS) is a key to reaching NASA's goal of developing high-risk, advanced communications technology using multiple frequency bands to support the nation's future communication needs. Using the multiple, dynamic hopping spot beams, and advanced on board switching and processing systems, ACTS will open a new era in communications satellite technology. One of the key technologies to be validated as part of the ACTS program is the multibeam antenna with rapidly reconfigurable hopping and fixed spot beam to serve users equipped with small-aperature terminals within the coverage areas. The proposed antenna technology experiments are designed to evaluate in-orbit ACTS multibeam antenna performance (radiation pattern, gain, cross pol levels, etc.).

Understanding Information Technology Investment Decision-Making in the Context of Hotel Global Distribution Systems: a Multiple-Case Study

OpenAIRE

Connolly, Daniel J.

1999-01-01

UNDERSTANDING INFORMATION TECHNOLOGY INVESTMENT DECISION-MAKING IN THE CONTEXT OF HOTEL GLOBAL DISTRIBUTION SYSTEMS: A MULTIPLE-CASE STUDY by Daniel J. Connolly Dr. Michael D. Olsen, Chair Department of Hospitality and Tourism Management ABSTRACT This study investigates what three large, multinational hospitality companies do in practice when evaluating and making IT investment decisions. This study was launched in an attempt to 1) learn more about ...

Physical and economical aspects of Pu multiple recycling on the basis of REMIX reprocessing technology in thermal reactors

International Nuclear Information System (INIS)

Teplov, P.S.; Alekseev, P.N.; Bobrov, E.A.; Chibinyaev, A.V.

2016-01-01

The basic strategy of Russian nuclear energy is propagation of a closed fuel cycle on the basis of fast breeder and thermal reactors, as well as the solution of the spent nuclear fuel accumulation and resource problems. The 3 variants of multiple Pu and U recycling in Russian pressurized water reactor concept reactors on the basis of Regenerated Mixture of U, Pu oxides (REMIX) reprocessing technology are considered in this work. The REMIX fuel is fabricated from an un-separated mixture of uranium and plutonium obtained during spent fuel reprocessing with further makeup by enriched natural U or reactor grade Pu. This makes it possible to recycle several times the total amount of Pu obtained from the spent fuel. The main difference in Pu recycling is the concept of 100% or partial fuel loading of the core. The third variant is heterogeneous composition of enriched uranium and uranium-plutonium mixed oxide fuel pins in one fuel assembly. It should be noted that all fuel assemblies with Pu require the involvement of expensive technologies during manufacturing. These 3 variants of the full core loadings can be balanced on zero Pu accumulation in the cycle. The various physical and economical aspects of Pu and U multiple recycling in selected variants are presented in the given work. The better results in natural uranium savings can be achieved for the standard REMIX(UOX) approach. The usage of regenerated materials in thermal power reactors gives not more than 30% saving of natural uranium consumption. It is important to note that the use of REMIX technology in the closed fuel cycle is more expensive than the open fuel cycle with direct spent fuel disposal. It is also important to see that uranium multiple recycling in the REMIX fuel form or using the re-enrichment process leads to the degradation of the uranium isotope composition. The "2"3"6U and "2"3"2U concentrations in the fuel are increasing and the regenerated uranium treatment becomes more complicated

27 CFR 46.243 - Articles at multiple locations.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Articles at multiple... Cigarette Tubes Held for Sale on April 1, 2009 Records § 46.243 Articles at multiple locations. The dealer must maintain a list of all places where the dealer holds articles subject to the floor stocks tax...

46 CFR 111.10-5 - Multiple energy sources.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Multiple energy sources. 111.10-5 Section 111.10-5...-GENERAL REQUIREMENTS Power Supply § 111.10-5 Multiple energy sources. Failure of any single generating set energy source such as a boiler, diesel, gas turbine, or steam turbine must not cause all generating sets...

Plasmacytoma Infiltrating Leiomyoma in Multiple Myeloma

Science.gov (United States)

2018-01-19

REPORT TYPE 3. DATES COVERED (From - To) 01/19/2018 Poster 01/19/2018-01/21/2018 4. TITLE AND SUBTITLE Sa. CONTRACT NUMBER Plasmacytoma...Infiltrating Leiomyoma in Multiple Myeloma Sb. GRANT NUMBER Sc. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Sd. PROJECT NUMBER Capt Eden, Rina Se. TASK NUMBER Sf

10 CFR 603.1340 - Technology investment agreement.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Technology investment agreement. 603.1340 Section 603.1340 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Definitions of Terms Used in this Part § 603.1340 Technology investment agreement. A TIA is a special type of...

15 CFR 971.423 - Best available technology.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Best available technology. 971.423... technology. The Administrator will require in all activities under new permits, and wherever practicable in activities under existing permits, the use of the best available technologies for the protection of safety...

Technology Roadmapping for Waste Management

International Nuclear Information System (INIS)

Bray, O.

2003-01-01

Technology roadmapping can be an effective strategic technology planning tool. This paper describes a process for customizing a generic technology roadmapping process. Starting with a generic process reduces the learning curve and speeds up the roadmap development. Similarly, starting with a generic domain model provides leverage across multiple applications or situations within the domain. A process that combines these two approaches facilitates identifying technology gaps and determining common core technologies that can be reused for multiple applications or situations within the domain. This paper describes both of these processes and how they can be integrated. A core team and a number of technology working groups develop the technology roadmap, which includes critical system requirements and targets, technology areas and metrics for each area, and identifies and evaluates possible technology alternatives to recommend the most appropriate ones to pursue. A generalized waste management model, generated by considering multiple situations or applications in terms of a generic waste management model, provides the domain requirements for the technology roadmapping process. Finally, the paper discusses lessons learns from a number of roadmapping projects

Using Multiple Technologies to Teach Nursing Students about Adoption

Science.gov (United States)

Harrison, Sharonlyn; Henneman, Kris; Herrera, Maida Y.; Hockman, Elaine; Brooks, Evelyn; Darland, Nancy; Kulik, Noel; Sandy-Hanson, Anika E.

2013-01-01

Technology is becoming increasingly more important in the enhancement of educating university students. Very little research has been done regarding how the combination of educational technologies affects test scores, compared to the use of one technology alone. This research article examines whether the post-scores of nursing students increased…

Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology.

Science.gov (United States)

Xu, Tao; Zhao, Weixin; Zhu, Jian-Ming; Albanna, Mohammad Z; Yoo, James J; Atala, Anthony

2013-01-01

This study was designed to develop a versatile method for fabricating complex and heterogeneous three-dimensional (3D) tissue constructs using simultaneous ink-jetting of multiple cell types. Human amniotic fluid-derived stem cells (hAFSCs), canine smooth muscle cells (dSMCs), and bovine aortic endothelial cells (bECs), were separately mixed with ionic cross-linker calcium chloride (CaCl(2)), loaded into separate ink cartridges and printed using a modified thermal inkjet printer. The three cell types were delivered layer-by-layer to pre-determined locations in a sodium alginate-collagen composite located in a chamber under the printer. The reaction between CaCl(2) and sodium alginate resulted in a rapid formation of a solid composite gel and the printed cells were anchored in designated areas within the gel. The printing process was repeated for several cycles leading to a complex 3D multi-cell hybrid construct. The biological functions of the 3D printed constructs were evaluated in vitro and in vivo. Each of the printed cell types maintained their viability and normal proliferation rates, phenotypic expression, and physiological functions within the heterogeneous constructs. The bioprinted constructs were able to survive and mature into functional tissues with adequate vascularization in vivo. These findings demonstrate the feasibility of fabricating complex heterogeneous tissue constructs containing multiple cell types using inkjet printing technology. Copyright © 2012 Elsevier Ltd. All rights reserved.

Optical code division multiple access fundamentals and applications

CERN Document Server

Prucnal, Paul R

2005-01-01

Code-division multiple access (CDMA) technology has been widely adopted in cell phones. Its astonishing success has led many to evaluate the promise of this technology for optical networks. This field has come to be known as Optical CDMA (OCDMA). Surveying the field from its infancy to the current state, Optical Code Division Multiple Access: Fundamentals and Applications offers the first comprehensive treatment of OCDMA from technology to systems.The book opens with a historical perspective, demonstrating the growth and development of the technologies that would eventually evolve into today's

Industrial Arts Test Development, Book III. Resource Items for Graphics Technology, Power Technology, Production Technology.

Science.gov (United States)

New York State Education Dept., Albany.

This booklet is designed to assist teachers in developing examinations for classroom use. It is a collection of 955 objective test questions, mostly multiple choice, for industrial arts students in the three areas of graphics technology, power technology, and production technology. Scoring keys are provided. There are no copyright restrictions,…

Incorporating 3D-printing technology in the design of head-caps and electrode drives for recording neurons in multiple brain regions.

Science.gov (United States)

Headley, Drew B; DeLucca, Michael V; Haufler, Darrell; Paré, Denis

2015-04-01

Recent advances in recording and computing hardware have enabled laboratories to record the electrical activity of multiple brain regions simultaneously. Lagging behind these technical advances, however, are the methods needed to rapidly produce microdrives and head-caps that can flexibly accommodate different recording configurations. Indeed, most available designs target single or adjacent brain regions, and, if multiple sites are targeted, specially constructed head-caps are used. Here, we present a novel design style, for both microdrives and head-caps, which takes advantage of three-dimensional printing technology. This design facilitates targeting of multiple brain regions in various configurations. Moreover, the parts are easily fabricated in large quantities, with only minor hand-tooling and finishing required. Copyright © 2015 the American Physiological Society.

26 CFR 26.2653-1 - Taxation of multiple skips.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Taxation of multiple skips. 26.2653-1 Section 26.2653-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) ESTATE...-1 Taxation of multiple skips. (a) General rule. If property is held in trust immediately after a GST...

XPS study on Mg0.9-xTi0.1PdxNi (x = 0.04, 0.06, 0.08, 0.1) hydrogen storage electrode alloys after charge-discharge cycles

International Nuclear Information System (INIS)

Tian Qifeng; Zhang Yao; Wu Yuanxin

2009-01-01

The passive film composition of Mg 0.9-x Ti 0.1 Pd x Ni (x = 0.04, 0.06, 0.08, 0.1) hydrogen storage alloys after 40 charge-discharge cycles has been investigated by means of X-ray photoelectron spectroscopy (XPS) in combination with Ar + sputtering technology. With the XPSPEAK software, high resolution spectra of alloy elements and oxygen were deconvolved into individual peaks. Composites formed by metal elements and their relative contents were also deduced. It was found that the composites originated from Mg and Ni were mainly in the form of their oxides and hydroxides, which existed at the top surface of alloys. With the increase of sputtering depth, the hydroxides of Mg and Ni gradually disappeared while corresponding oxides dominated their passive products. According to the analysis results of oxygen spectra, the elemental segregation of Mg and Ni was influenced by the substitution of Pd because the addition of Pd slightly enhanced the surface energy of the alloys and suppressed the formation of Mg hydroxide and oxide. Ti and Pd presented multiple-oxides from the surface to the inner alloys and metallic Pd appeared in the sub-layers of the alloys' surface. The possible mechanisms of the formation of passive products were suggested on the basis of the discussion in the paper.

45 CFR 2523.110 - Can Federal agencies submit multiple applications?

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Can Federal agencies submit multiple applications? 2523.110 Section 2523.110 Public Welfare Regulations Relating to Public Welfare (Continued) CORPORATION... AMERICORPS PROGRAM ASSISTANCE § 2523.110 Can Federal agencies submit multiple applications? No. The...

What do K-12 students feel when dealing with technology and engineering issues? Gardner's multiple intelligence theory implications in technology lessons for motivating engineering vocations at Spanish Secondary School

Science.gov (United States)

Sánchez-Martín, Jesús; Álvarez-Gragera, García J.; Dávila-Acedo, M. Antonia; Mellado, Vicente

2017-11-01

The interest on engineering and scientific studies can be raised up even from the early years of academic instructional process. This vocation may be linked to emotions and aptitudes towards technological education. Particularly, students get in touch with these technological issues (namely STEM) during the Compulsory Secondary Education in Spain (12-16 years old).This work presents a preliminary evaluation of how relevant is Gardner's multiple intelligence theory (MIT) in the teaching-learning process within the Technology Lessons. In this sense, MIT was considered as an explanation variable of the emotional response within the different educational parts (so-called syllabus units, SU) in the Technology spanish curriculum. Different intelligence style (IS) will orient the student to a vision of the engineering and technology. This work tries to identify which relationships can be established between IS and specific technology and engineering learning. This research involved up to 135 students were subsequently tested about their predominant (IS) and on the emotions that arouse in them when working with each SU. The results were statistically significant and only those with a Logic-arithmetic or Environmental IS were not affected by the SU.Best teaching and learning practicesare required for encouraging further engineering studies.

34 CFR 300.105 - Assistive technology.

Science.gov (United States)

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Assistive technology. 300.105 Section 300.105 Education... DISABILITIES State Eligibility Other Fape Requirements § 300.105 Assistive technology. (a) Each public agency must ensure that assistive technology devices or assistive technology services, or both, as those terms...

The Use of Digital and Remote Communication Technologies as a Tool for Multiple Sclerosis Management: Narrative Review.

Science.gov (United States)

Marziniak, Martin; Brichetto, Giampaolo; Feys, Peter; Meyding-Lamadé, Uta; Vernon, Karen; Meuth, Sven G

2018-04-24

Despite recent advances in multiple sclerosis (MS) care, many patients only infrequently access health care services, or are unable to access them easily, for reasons such as mobility restrictions, travel costs, consultation and treatment time constraints, and a lack of locally available MS expert services. Advances in mobile communications have led to the introduction of electronic health (eHealth) technologies, which are helping to improve both access to and the quality of health care services. As the Internet is now readily accessible through smart mobile devices, most people can take advantage of eHealth apps. The development of digital applications and remote communication technologies for patients with MS has increased rapidly in recent years. These apps are intended to complement traditional in-clinic approaches and can bring significant benefits to both patients with MS and health care providers (HCPs). For patients, such eHealth apps have been shown to improve outcomes and increase access to care, disease information, and support. These apps also help patients to participate actively in self-management, for example, by tracking adherence to treatment, changes in bladder and bowel habits, and activity and mood. For HCPs, MS eHealth solutions can simplify the multidisciplinary approaches needed to tailor MS management strategies to individual patients; facilitate remote monitoring of patient symptoms, adverse events, and outcomes; enable the efficient use of limited resources and clinic time; and potentially allow more timely intervention than is possible with scheduled face-to-face visits. These benefits are important because MS is a long-term, multifaceted chronic condition that requires ongoing monitoring, assessment, and management. We identified in the literature 28 eHealth solutions for patients with MS that fall within the four categories of screening and assessment, disease monitoring and self-management, treatment and rehabilitation, and advice and

A Technology-Aided Program to Support Basic Occupational Engagement and Mobility in Persons with Multiple Disabilities

Directory of Open Access Journals (Sweden)

Giulio E. Lancioni

2017-12-01

Full Text Available BackgroundPersons with severe/profound intellectual and multiple disabilities tend to be passive and sedentary. Promoting their occupational engagement and mobility (i.e., indoor walking can help to modify their condition and improve their environmental input, health, and social image.AimThis study assessed whether a technology-aided program was suitable to (a support independent occupation and mobility in eight participants with intellectual and sensory disabilities and (b eventually increase the participants’ heart rates to levels considered beneficial for them.MethodThe program, which involved a computer system regulating the presentation of auditory or visual cues and the delivery of preferred stimulation, was introduced according to a non-concurrent multiple baseline design across participants. The auditory or visual cues guided the participants to collect objects from different desks and to transport them to a final destination (i.e., depositing them into a carton. Preferred stimulation was available to the participants for collecting and for depositing the objects.ResultsDuring the program, all participants had an increase in their independent responses of collecting objects and transporting them to the final destination. Their heart rates also increased to levels reflecting moderate-intensity physical exercise, potentially beneficial for their health.ConclusionA program, such as that used in this study, can promote occupational engagement and mobility in persons with multiple disabilities.

INTEGRATION OF SOCIAL TECHNOLOGIES MICRO DAMS AND MULTIPLE-USE PONDS

Directory of Open Access Journals (Sweden)

Luciano Cordoval de Barros

2011-07-01

Full Text Available The integration of Social Technologies Micro Dams and Multiple-Use Ponds has guaranteed to farmers their water sustainability, allowing the creation of fish farms and the irrigation of gardens. In Araçaí, Minas Gerais State, in the community Pai José Farms, in a dry soil under Cerrado vegetation, predominantly yellow and red, porous, deep latosoils was built 96 micro dams in 2008 and 90 in 2009 to collect surface runoff water from rainfall, after meetings with the community. Since the water is contained, were also reduced the erosion and the silting. The micro dams are loaded and unloaded eight to 12 times a year, infiltrating water and raising the groundwater, moistening the soil around them and on lowlands, mitigating droughts and revitalizing streams. Increase in the level of tanks from four to 10 or 11 meters of water was observed, resulting in farmers' feeling of abundance. This enabled the construction of ponds sealed with common plastic tarpaulins for water storage during the dry season by pumping water from the tanks, which enabled fish farming and also irrigation of gardens. As a complement, in the rainy season, the ponds are also supplied with water collected from roofs. The experiment has been replicated successfully in two more neighboring towns and may be applied in states of central Brazil, where similar soils and conditions prevail.

48 CFR 39.104 - Information technology services.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Information technology... SPECIAL CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY General 39.104 Information technology services. When acquiring information technology services, solicitations must not describe any...

The use of gaming technology for rehabilitation in people with multiple sclerosis.

Science.gov (United States)

Taylor, M J D; Griffin, M

2015-04-01

Gaming technology - exergaming - is a novel tool to facilitate exercise, improve balance, and encourage rehabilitation training. This review will describe some of the key exergame research to promote physical activity and its use in rehabilitation in other diseases or clinical populations. We will then describe the current state of research in exergaming in people with multiple sclerosis and describe the theories for the mechanism behind some of the improvements in outcomes seen after using exergaming. Lastly, we will identify gaps in the literature and provide directions for future work in this growing area. The current work is contradictory and there is no consensus with regards to training duration/intensity and the outcomes used to assess the clinical effectiveness. This in part is due to the off-the-shelf nature of the games used. A more satisfactory approach would be the development of bespoke games which match a clinical need. Exergames are seen as enjoyable and could be effective in enhancing adherence to rehabilitation. However, the definitive RCT has yet to be carried out comparing exergaming to traditional exercise. © The Author(s), 2014.

High-Throughput Multiple Dies-to-Wafer Bonding Technology and III/V-on-Si Hybrid Lasers for Heterogeneous Integration of Optoelectronic Integrated Circuits

Directory of Open Access Journals (Sweden)

Xianshu eLuo

2015-04-01

Full Text Available Integrated optical light source on silicon is one of the key building blocks for optical interconnect technology. Great research efforts have been devoting worldwide to explore various approaches to integrate optical light source onto the silicon substrate. The achievements so far include the successful demonstration of III/V-on-Si hybrid lasers through III/V-gain material to silicon wafer bonding technology. However, for potential large-scale integration, leveraging on mature silicon complementary metal oxide semiconductor (CMOS fabrication technology and infrastructure, more effective bonding scheme with high bonding yield is in great demand considering manufacturing needs. In this paper, we propose and demonstrate a high-throughput multiple dies-to-wafer (D2W bonding technology which is then applied for the demonstration of hybrid silicon lasers. By temporarily bonding III/V dies to a handle silicon wafer for simultaneous batch processing, it is expected to bond unlimited III/V dies to silicon device wafer with high yield. As proof-of-concept, more than 100 III/V dies bonding to 200 mm silicon wafer is demonstrated. The high performance of the bonding interface is examined with various characterization techniques. Repeatable demonstrations of 16-III/V-die bonding to pre-patterned 200 mm silicon wafers have been performed for various hybrid silicon lasers, in which device library including Fabry-Perot (FP laser, lateral-coupled distributed feedback (LC-DFB laser with side wall grating, and mode-locked laser (MLL. From these results, the presented multiple D2W bonding technology can be a key enabler towards the large-scale heterogeneous integration of optoelectronic integrated circuits (H-OEIC.

27 CFR 24.282 - Multiple transfers.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Multiple transfers. 24.282 Section 24.282 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT... transfer record for all wine (including distilling material and vinegar stock) transferred by pipeline to...

Rapid determination of {sup 90}Sr in urine samples using AnaLig Sr-01

Energy Technology Data Exchange (ETDEWEB)

Bilohuscin, J.; Dulanska, S.; Gardonova, V. [Univerzita Komenskeho, Prirodovedecka fakulta, Katedra jadrovej chemie, 84215 Bratislava (Slovakia)

2013-04-16

This work describes the use of IBC's AnaLig Sr-01 molecular recognition technology product to effectively and selectively pre-concentrate, separate and recover strontium from urine samples. This method uses two-stage columns separation consisting of two different commercial products Eichrom's Pre-filter Material and AnaLig Sr-01 column from IBC Advanced Technologies. This method does not involve co-precipitation of strontium as phosphates and oxalates from urine samples. The new rapid method separates strontium-90 with high chemical recovery (authors)

Technology-Aided Leisure and Communication Opportunities for Two Post-Coma Persons Emerged from a Minimally Conscious State and Affected by Multiple Disabilities

Science.gov (United States)

Lancioni, Giulio E.; O'Reilly, Mark F.; Singh, Nirbhay N.; Sigafoos, Jeff; Buonocunto, Francesca; Sacco, Valentina; Navarro, Jorge; Lanzilotti, Crocifissa; De Tommaso, Marina; Megna, Marisa; Oliva, Doretta

2013-01-01

This study assessed technology-aided programs for helping two post-coma persons, who had emerged from a minimally conscious state and were affected by multiple disabilities, to (a) engage with leisure stimuli and request caregiver's procedures, (b) send out and listen to text messages for communication with distant partners, and (c) combine…

30 CFR 7.31 - New technology.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false New technology. 7.31 Section 7.31 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... technology. MSHA may approve brattice cloth and ventilation tubing that incorporates technology for which the...

Design and in vitro performance testing of multiple air classifier technology in a new disposable inhaler concept (Twincer (R)) for high powder doses

NARCIS (Netherlands)

de Boer, Anne H; Hagedoorn, Paul; Westerman, Elsbeth M; Le Brun, Paul P H; Heijerman, Harry G M; Frijlink, Henderik W

2006-01-01

Dry powder inhalation of antibiotics in cystic fibrosis (CF) therapy may be a valuable alternative for wet nebulisation, because it saves time and it improves lung deposition. In this study, it is shown that the use of multiple air classifier technology enables effective dispersion of large amounts

10 CFR 611.202 - Advanced Technology Vehicle Manufacturing Facility Award Program.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Advanced Technology Vehicle Manufacturing Facility Award... TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.202 Advanced Technology Vehicle Manufacturing Facility Award Program. DOE may issue, under the Advanced Technology Vehicle...

Integrating different tracking systems in football: multiple camera semi-automatic system, local position measurement and GPS technologies.

Science.gov (United States)

Buchheit, Martin; Allen, Adam; Poon, Tsz Kit; Modonutti, Mattia; Gregson, Warren; Di Salvo, Valter

2014-12-01

Abstract During the past decade substantial development of computer-aided tracking technology has occurred. Therefore, we aimed to provide calibration equations to allow the interchangeability of different tracking technologies used in soccer. Eighty-two highly trained soccer players (U14-U17) were monitored during training and one match. Player activity was collected simultaneously with a semi-automatic multiple-camera (Prozone), local position measurement (LPM) technology (Inmotio) and two global positioning systems (GPSports and VX). Data were analysed with respect to three different field dimensions (small, systems were compared, and calibration equations (linear regression models) between each system were calculated for each field dimension. Most metrics differed between the 4 systems with the magnitude of the differences dependant on both pitch size and the variable of interest. Trivial-to-small between-system differences in total distance were noted. However, high-intensity running distance (>14.4 km · h -1 ) was slightly-to-moderately greater when tracked with Prozone, and accelerations, small-to-very largely greater with LPM. For most of the equations, the typical error of the estimate was of a moderate magnitude. Interchangeability of the different tracking systems is possible with the provided equations, but care is required given their moderate typical error of the estimate.

Restoration of γ-ray multiplicity distributions from experiments with low efficiency multiplicity filters

International Nuclear Information System (INIS)

Bellia, G.; Del Zoppo, A.; Migneco, E.; Russo, G.; Istituto Nazionale di Fisica Nucleare, Catania

1984-01-01

The restoration of γ-ray multiplicity distributions from experimental p-fold coincidence distributions is discussed. It is shown that the restoration of the multiplicity from measurements with low total detection efficiency is an 'incorrectly posed problem'. While in the literature the analysis of the experimental data has been attempted only in terms of the lowest central moments of the multiplicity distribution, in this paper an unfolding method based on the minimization of the directioned discrepancies in the probability space is used. The method is found to work very well even if the total efficiency Ω <= 0.1. Realistic tests and a comparison with the usual method of analysis are presented. (orig.)

Technology Management within Product Lines in High Technology Markets

Science.gov (United States)

Sarangee, Kumar R.

2009-01-01

Understanding the nuances of product line management has been of great interest to business scholars and practitioners. This assumes greater significance for firms conducting business in technologically dynamic industries, where they face certain challenges regarding the management of multiple, overlapping technologies within their product lines.…

30 CFR 7.411 - New technology.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false New technology. 7.411 Section 7.411 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... Kits § 7.411 New technology. MSHA may approve cable products or splice kits that incorporate technology...

30 CFR 7.92 - New technology.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false New technology. 7.92 Section 7.92 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... Mines § 7.92 New technology. MSHA may approve a diesel engine that incorporates technology for which the...

30 CFR 14.23 - New technology.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false New technology. 14.23 Section 14.23 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... § 14.23 New technology. MSHA may approve a conveyor belt that incorporates technology for which the...

30 CFR 7.107 - New technology.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false New technology. 7.107 Section 7.107 Mineral... Underground Coal Mines Where Permissible Electric Equipment is Required § 7.107 New technology. MSHA may approve a diesel power package that incorporates technology for which the requirements of this subpart are...

30 CFR 7.510 - New technology.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false New technology. 7.510 Section 7.510 Mineral... MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Refuge Alternatives § 7.510 New technology. MSHA may approve a refuge alternative or a component that incorporates new knowledge or technology, if the...

HLA-DRB1*15:01-DQA1*01:02-DQB1*06:02 Haplotype Protects Autoantibody-Positive Relatives From Type 1 Diabetes Throughout the Stages of Disease Progression.

Science.gov (United States)

Pugliese, Alberto; Boulware, David; Yu, Liping; Babu, Sunanda; Steck, Andrea K; Becker, Dorothy; Rodriguez, Henry; DiMeglio, Linda; Evans-Molina, Carmella; Harrison, Leonard C; Schatz, Desmond; Palmer, Jerry P; Greenbaum, Carla; Eisenbarth, George S; Sosenko, Jay M

2016-04-01

The HLA-DRB1*15:01-DQA1*01:02-DQB1*06:02 haplotype is linked to protection from the development of type 1 diabetes (T1D). However, it is not known at which stages in the natural history of T1D development this haplotype affords protection. We examined a cohort of 3,358 autoantibody-positive relatives of T1D patients in the Pathway to Prevention (PTP) Study of the Type 1 Diabetes TrialNet. The PTP study examines risk factors for T1D and disease progression in relatives. HLA typing revealed that 155 relatives carried this protective haplotype. A comparison with 60 autoantibody-negative relatives suggested protection from autoantibody development. Moreover, the relatives with DRB1*15:01-DQA1*01:02-DQB1*06:02 less frequently expressed autoantibodies associated with higher T1D risk, were less likely to have multiple autoantibodies at baseline, and rarely converted from single to multiple autoantibody positivity on follow-up. These relatives also had lower frequencies of metabolic abnormalities at baseline and exhibited no overall metabolic worsening on follow-up. Ultimately, they had a very low 5-year cumulative incidence of T1D. In conclusion, the protective influence of DRB1*15:01-DQA1*01:02-DQB1*06:02 spans from autoantibody development through all stages of progression, and relatives with this allele only rarely develop T1D. © 2016 by the American Diabetes Association. Readers may use this article as long as the work is properly cited, the use is educational and not for profit, and the work is not altered.

48 CFR 1852.227-70 - New technology.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true New technology. 1852.227-70... New technology. As prescribed in 1827.303-70(b), insert the following clause: New Technology (NOV 1998... administration of this New Technology clause within six months of conception and/or first actual reduction to...

30 CFR 7.52 - New technology.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false New technology. 7.52 Section 7.52 Mineral... MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Battery Assemblies § 7.52 New technology. MSHA may approve a battery assembly that incorporates technology for which the requirements of this subpart are not...

Multiple technologies applied to characterization of the porosity and permeability of the Biscayne aquifer, Florida

Science.gov (United States)

Cunningham, K.J.; Sukop, M.C.

2011-01-01

Research is needed to determine how seepage-control actions planned by the Comprehensive Everglades Restoration Plan (CERP) will affect recharge, groundwater flow, and discharge within the dual-porosity karstic Biscayne aquifer where it extends eastward from the Everglades to Biscayne Bay. A key issue is whether the plan can be accomplished without causing urban flooding in adjacent populated areas and diminishing coastal freshwater flow needed in the restoration of the ecologic systems. Predictive simulation of groundwater flow is a prudent approach to understanding hydrologic change and potential ecologic impacts. A fundamental problem to simulation of karst groundwater flow is how best to represent aquifer heterogeneity. Currently, U.S. Geological Survey (USGS) researchers and academic partners are applying multiple innovative technologies to characterize the spatial distribution of porosity and permeability within the Biscayne aquifer.

Molecular Diversity of HIV-1 among People Who Inject Drugs in Kuala Lumpur, Malaysia: Massive Expansion of Circulating Recombinant Form (CRF) 33_01B and Emergence of Multiple Unique Recombinant Clusters

Science.gov (United States)

Chow, Wei Zhen; Ng, Kim Tien; Yong, Yean Kong; Azmel, Azureen; Takebe, Yutaka; Al-Darraji, Haider Abdulrazzaq Abed; Kamarulzaman, Adeeba; Tee, Kok Keng

2013-01-01

Since the discovery of HIV-1 circulating recombinant form (CRF) 33_01B in Malaysia in the early 2000 s, continuous genetic diversification and active recombination involving CRF33_01B and other circulating genotypes in the region including CRF01_AE and subtype B′ of Thai origin, have led to the emergence of novel CRFs and unique recombinant forms. The history and magnitude of CRF33_01B transmission among various risk groups including people who inject drugs (PWID) however have not been investigated despite the high epidemiological impact of CRF33_01B in the region. We update the most recent molecular epidemiology of HIV-1 among PWIDs recruited in Malaysia between 2010 and 2011 by population sequencing and phylogenetic analysis of 128 gag-pol sequences. HIV-1 CRF33_01B was circulating among 71% of PWIDs whilst a lower prevalence of other previously dominant HIV-1 genotypes [subtype B′ (11%) and CRF01_AE (5%)] and CRF01_AE/B′ unique recombinants (13%) were detected, indicating a significant shift in genotype replacement in this population. Three clusters of CRF01_AE/B′ recombinants displaying divergent yet phylogenetically-related mosaic genomes to CRF33_01B were identified and characterized, suggestive of an abrupt emergence of multiple novel CRF clades. Using rigorous maximum likelihood approach and the Bayesian Markov chain Monte Carlo (MCMC) sampling of CRF33_01Bpol sequences to elucidate the past population dynamics, we found that the founder lineages of CRF33_01B were likely to have first emerged among PWIDs in the early 1990 s before spreading exponentially to various high and low-risk populations (including children who acquired infections from their mothers) and later on became endemic around the early 2000 s. Taken together, our findings provide notable genetic evidence indicating the widespread expansion of CRF33_01B among PWIDs and into the general population. The emergence of numerous previously unknown recombinant clades highlights the

Molecular diversity of HIV-1 among people who inject drugs in Kuala Lumpur, Malaysia: massive expansion of circulating recombinant form (CRF) 33_01B and emergence of multiple unique recombinant clusters.

Science.gov (United States)

Chow, Wei Zhen; Ong, Lai Yee; Razak, Siti Humaira; Lee, Yeat Mei; Ng, Kim Tien; Yong, Yean Kong; Azmel, Azureen; Takebe, Yutaka; Al-Darraji, Haider Abdulrazzaq Abed; Kamarulzaman, Adeeba; Tee, Kok Keng

2013-01-01

Since the discovery of HIV-1 circulating recombinant form (CRF) 33_01B in Malaysia in the early 2000 s, continuous genetic diversification and active recombination involving CRF33_01B and other circulating genotypes in the region including CRF01_AE and subtype B' of Thai origin, have led to the emergence of novel CRFs and unique recombinant forms. The history and magnitude of CRF33_01B transmission among various risk groups including people who inject drugs (PWID) however have not been investigated despite the high epidemiological impact of CRF33_01B in the region. We update the most recent molecular epidemiology of HIV-1 among PWIDs recruited in Malaysia between 2010 and 2011 by population sequencing and phylogenetic analysis of 128 gag-pol sequences. HIV-1 CRF33_01B was circulating among 71% of PWIDs whilst a lower prevalence of other previously dominant HIV-1 genotypes [subtype B' (11%) and CRF01_AE (5%)] and CRF01_AE/B' unique recombinants (13%) were detected, indicating a significant shift in genotype replacement in this population. Three clusters of CRF01_AE/B' recombinants displaying divergent yet phylogenetically-related mosaic genomes to CRF33_01B were identified and characterized, suggestive of an abrupt emergence of multiple novel CRF clades. Using rigorous maximum likelihood approach and the Bayesian Markov chain Monte Carlo (MCMC) sampling of CRF33_01Bpol sequences to elucidate the past population dynamics, we found that the founder lineages of CRF33_01B were likely to have first emerged among PWIDs in the early 1990 s before spreading exponentially to various high and low-risk populations (including children who acquired infections from their mothers) and later on became endemic around the early 2000 s. Taken together, our findings provide notable genetic evidence indicating the widespread expansion of CRF33_01B among PWIDs and into the general population. The emergence of numerous previously unknown recombinant clades highlights the escalating

Molecular diversity of HIV-1 among people who inject drugs in Kuala Lumpur, Malaysia: massive expansion of circulating recombinant form (CRF 33_01B and emergence of multiple unique recombinant clusters.

Directory of Open Access Journals (Sweden)

Wei Zhen Chow

Full Text Available Since the discovery of HIV-1 circulating recombinant form (CRF 33_01B in Malaysia in the early 2000 s, continuous genetic diversification and active recombination involving CRF33_01B and other circulating genotypes in the region including CRF01_AE and subtype B' of Thai origin, have led to the emergence of novel CRFs and unique recombinant forms. The history and magnitude of CRF33_01B transmission among various risk groups including people who inject drugs (PWID however have not been investigated despite the high epidemiological impact of CRF33_01B in the region. We update the most recent molecular epidemiology of HIV-1 among PWIDs recruited in Malaysia between 2010 and 2011 by population sequencing and phylogenetic analysis of 128 gag-pol sequences. HIV-1 CRF33_01B was circulating among 71% of PWIDs whilst a lower prevalence of other previously dominant HIV-1 genotypes [subtype B' (11% and CRF01_AE (5%] and CRF01_AE/B' unique recombinants (13% were detected, indicating a significant shift in genotype replacement in this population. Three clusters of CRF01_AE/B' recombinants displaying divergent yet phylogenetically-related mosaic genomes to CRF33_01B were identified and characterized, suggestive of an abrupt emergence of multiple novel CRF clades. Using rigorous maximum likelihood approach and the Bayesian Markov chain Monte Carlo (MCMC sampling of CRF33_01Bpol sequences to elucidate the past population dynamics, we found that the founder lineages of CRF33_01B were likely to have first emerged among PWIDs in the early 1990 s before spreading exponentially to various high and low-risk populations (including children who acquired infections from their mothers and later on became endemic around the early 2000 s. Taken together, our findings provide notable genetic evidence indicating the widespread expansion of CRF33_01B among PWIDs and into the general population. The emergence of numerous previously unknown recombinant clades highlights the

Evaluation of Shear Strength of RC Beams with Multiple Interfaces Formed before Initial Setting Using 3D Printing Technology

Directory of Open Access Journals (Sweden)

Kyeongjin Kim

2017-11-01

Full Text Available With the recent development of 3D printing technology, concrete materials are sometimes used in 3D printing. Concrete structures based on 3D printing have been characterized to have the form of multiple layer build-up. Unlike general concrete structures, therefore, the 3D-printed concrete can be regarded as an orthotropic material. The material property of the 3D-printed concrete’s interface between layers is expected to be far different from that of general concrete bodies since there are no aggregate interlocks and weak chemical bonding. Such a difference finally affects the structural performance of concrete structures even though the interfaces are formed before initial setting of the concrete. The current study mainly reviewed the changes in fracture energy (toughness with respect to various environmental conditions of such interface. Changes in fracture energies of interfaces between concrete layers were measured using low-speed Crack Mouth Opening Displacement (CMOD closed loop concrete fracture test. The experimental results indicated reduction in fracture energy as well as tensile strengths. To improve the tensile strength of interfaces, the use of bridging materials is suggested. Since it was assumed that reduction in fracture energy could be a cause of shear strength, to evaluate the reduced structural performance of concrete structure constructed with multiple interfaces by 3D printing technology, the shear strength of RC beam by 3D printing technology was predicted and compared with that of plain RC beam. Based on the fracture energy measured in this study, Modified Compression Field Theory (MCFT theory-applied Vector 2 program was employed to predict the degree of reduction in shear strength without considering stirrups. Reduction factors were presented based on the obtained results to predict the reduction in shear strength due to interfaces before initial setting of the concrete.

Multiple Payload Ejector for Education, Science and Technology Experiments

Science.gov (United States)

Lechworth, Gary

2005-01-01

The education research community no longer has a means of being manifested on Space Shuttle flights, and small orbital payload carriers must be flown as secondary payloads on ELV flights, as their launch schedule, secondary payload volume and mass permits. This has resulted in a backlog of small payloads, schedule and cost problems, and an inability for the small payloads community to achieve routine, low-cost access to orbit. This paper will discuss Goddard's Wallops Flight Facility funded effort to leverage its core competencies in small payloads, sounding rockets, balloons and range services to develop a low cost, multiple payload ejector (MPE) carrier for orbital experiments. The goal of the MPE is to provide a low-cost carrier intended primarily for educational flight research experiments. MPE can also be used by academia and industry for science, technology development and Exploration experiments. The MPE carrier will take advantage of the DARPAI NASA partnership to perform flight testing of DARPA s Falcon small, demonstration launch vehicle. The Falcon is similar to MPE fiom the standpoint of focusing on a low-cost, responsive system. Therefore, MPE and Falcon complement each other for the desired long-term goal of providing the small payloads community with a low-cost ride to orbit. The readiness dates of Falcon and MPE are complementary, also. MPE is being developed and readied for flight within 18 months by a small design team. Currently, MPE is preparing for Critical Design Review in fall 2005, payloads are being manifested on the first mission, and the carrier will be ready for flight on the first Falcon demonstration flight in summer, 2006. The MPE and attached experiments can weigh up to 900 lb. to be compatible with Falcon demonstration vehicle lift capabilities fiom Wallops, and will be delivered to the Falcon demonstration orbit - 100 nautical mile circular altitude.

Sequence Factorization with Multiple References.

Directory of Open Access Journals (Sweden)

Sebastian Wandelt

Full Text Available The success of high-throughput sequencing has lead to an increasing number of projects which sequence large populations of a species. Storage and analysis of sequence data is a key challenge in these projects, because of the sheer size of the datasets. Compression is one simple technology to deal with this challenge. Referential factorization and compression schemes, which store only the differences between input sequence and a reference sequence, gained lots of interest in this field. Highly-similar sequences, e.g., Human genomes, can be compressed with a compression ratio of 1,000:1 and more, up to two orders of magnitude better than with standard compression techniques. Recently, it was shown that the compression against multiple references from the same species can boost the compression ratio up to 4,000:1. However, a detailed analysis of using multiple references is lacking, e.g., for main memory consumption and optimality. In this paper, we describe one key technique for the referential compression against multiple references: The factorization of sequences. Based on the notion of an optimal factorization, we propose optimization heuristics and identify parameter settings which greatly influence 1 the size of the factorization, 2 the time for factorization, and 3 the required amount of main memory. We evaluate a total of 30 setups with a varying number of references on data from three different species. Our results show a wide range of factorization sizes (optimal to an overhead of up to 300%, factorization speed (0.01 MB/s to more than 600 MB/s, and main memory usage (few dozen MB to dozens of GB. Based on our evaluation, we identify the best configurations for common use cases. Our evaluation shows that multi-reference factorization is much better than single-reference factorization.

Technology based Education System

DEFF Research Database (Denmark)

Kant Hiran, Kamal; Doshi, Ruchi; Henten, Anders

2016-01-01

Abstract - Education plays a very important role for the development of the country. Education has multiple dimensions from schooling to higher education and research. In all these domains, there is invariably a need for technology based teaching and learning tools are highly demanded in the acad......Abstract - Education plays a very important role for the development of the country. Education has multiple dimensions from schooling to higher education and research. In all these domains, there is invariably a need for technology based teaching and learning tools are highly demanded...... in the academic institutions. Thus, there is a need of comprehensive technology support system to cater the demands of all educational actors. Cloud Computing is one such comprehensive and user-friendly technology support environment that is the need of an hour. Cloud computing is the emerging technology that has...

14 CFR 1260.58 - Designation of new technology representative and patent representative.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Designation of new technology... of new technology representative and patent representative. Designation of New Technology... of this grant entitled “New Technology,” the following named representatives are hereby designated by...

[Multiple primary colorectal cancer: Clinical aspects].

Science.gov (United States)

Soldatkina, N V; Kit, O I; Gevorkyan, Yu A; Milakin, A G

to define some clinical characteristics of synchronous and metachronous colorectal cancer (CRC). The investigation was concerned with the data of 150 patients with T1-4N0-2M0-1 multiple primary CRC. The clinical, biological, and morphological characteristics of synchronous and metachronous tumors were analyzed. Multiple primary tumors were 6.01% of all the cases of CRC. There was a preponderance of synchronous CRC (63.75%) with the tumor localized in the sigmoid colon and rectum. In women, synchronous colorectal tumors were more often concurrent with breast tumors; metachronous ones were detected after treatment for genital tumors. In men, synchronous colorectal tumors were more frequently concurrent with kidney cancer; metachronous ones were identified after treatment for gastric cancer. The found characteristics of multiple primary colorectal tumors may be taken in account in programs for both primary diagnosis and follow-up after treatment for malignant tumors, which will be able to improve the early detection of cancer patients and their treatment results.

Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Research results of hard photon technology have been summarized as a part of novel technology development highly utilizing the quantum nature of photon. Hard photon technology refers to photon beam technologies which use photon in the 0.1 to 200 nm wavelength region. Hard photon has not been used in industry due to the lack of suitable photon sources and optical devices. However, hard photon in this wavelength region is expected to bring about innovations in such areas as ultrafine processing and material synthesis due to its atom selective reaction, inner shell excitation reaction, and spatially high resolution. Then, technological themes and possibility have been surveyed. Although there are principle proposes and their verification of individual technologies for the technologies of hard photon generation, regulation and utilization, they are still far from the practical applications. For the photon source technology, the laser diode pumped driver laser technology, laser plasma photon source technology, synchrotron radiation photon source technology, and vacuum ultraviolet photon source technology are presented. For the optical device technology, the multi-layer film technology for beam mirrors and the non-spherical lens processing technology are introduced. Also are described the reduction lithography technology, hard photon excitation process, and methods of analysis and measurement. 430 refs., 165 figs., 23 tabs.

WE-H-202-01: Memorial Introduction

International Nuclear Information System (INIS)

Kirby, N.

2016-01-01

Deformable image registration has now been commercially available for several years, with solid performance in a number of sites and for several applications including contour and dose mapping. However, more complex applications have arisen, such as assessing response to radiation therapy over time, registering images pre- and post-surgery, and auto-segmentation from atlases. These applications require innovative registration algorithms to achieve accurate alignment. The goal of this session is to highlight emerging registration technology and these new applications. The state of the art in image registration will be presented from an engineering perspective. Translational clinical applications will also be discussed to tie these new registration approaches together with imaging and radiation therapy applications in specific diseases such as cervical and lung cancers. Learning Objectives: To understand developing techniques and algorithms in deformable image registration that are likely to translate into clinical tools in the near future. To understand emerging imaging and radiation therapy clinical applications that require such new registration algorithms. Research supported in part by the National Institutes of Health under award numbers P01CA059827, R01CA166119, and R01CA166703. Disclosures: Phillips Medical systems (Hugo), Roger Koch (Christensen) support, Varian Medical Systems (Brock), licensing agreements from Raysearch (Brock) and Varian (Hugo).; K. Brock, Licensing Agreement - RaySearch Laboratories. Research Funding - Varian Medical Systems; G. Hugo, Research grant from National Institutes of Health, award number R01CA166119.; G. Christensen, Research support from NIH grants CA166119 and CA166703 and a gift from Roger Koch. There are no conflicts of interest.

WE-H-202-01: Memorial Introduction

Energy Technology Data Exchange (ETDEWEB)

Kirby, N. [University of Texas HSC SA (United States)

2016-06-15

Deformable image registration has now been commercially available for several years, with solid performance in a number of sites and for several applications including contour and dose mapping. However, more complex applications have arisen, such as assessing response to radiation therapy over time, registering images pre- and post-surgery, and auto-segmentation from atlases. These applications require innovative registration algorithms to achieve accurate alignment. The goal of this session is to highlight emerging registration technology and these new applications. The state of the art in image registration will be presented from an engineering perspective. Translational clinical applications will also be discussed to tie these new registration approaches together with imaging and radiation therapy applications in specific diseases such as cervical and lung cancers. Learning Objectives: To understand developing techniques and algorithms in deformable image registration that are likely to translate into clinical tools in the near future. To understand emerging imaging and radiation therapy clinical applications that require such new registration algorithms. Research supported in part by the National Institutes of Health under award numbers P01CA059827, R01CA166119, and R01CA166703. Disclosures: Phillips Medical systems (Hugo), Roger Koch (Christensen) support, Varian Medical Systems (Brock), licensing agreements from Raysearch (Brock) and Varian (Hugo).; K. Brock, Licensing Agreement - RaySearch Laboratories. Research Funding - Varian Medical Systems; G. Hugo, Research grant from National Institutes of Health, award number R01CA166119.; G. Christensen, Research support from NIH grants CA166119 and CA166703 and a gift from Roger Koch. There are no conflicts of interest.

The Use of Digital and Remote Communication Technologies as a Tool for Multiple Sclerosis Management: Narrative Review

Science.gov (United States)

Marziniak, Martin; Brichetto, Giampaolo; Feys, Peter; Meyding-Lamadé, Uta; Vernon, Karen

2018-01-01

Despite recent advances in multiple sclerosis (MS) care, many patients only infrequently access health care services, or are unable to access them easily, for reasons such as mobility restrictions, travel costs, consultation and treatment time constraints, and a lack of locally available MS expert services. Advances in mobile communications have led to the introduction of electronic health (eHealth) technologies, which are helping to improve both access to and the quality of health care services. As the Internet is now readily accessible through smart mobile devices, most people can take advantage of eHealth apps. The development of digital applications and remote communication technologies for patients with MS has increased rapidly in recent years. These apps are intended to complement traditional in-clinic approaches and can bring significant benefits to both patients with MS and health care providers (HCPs). For patients, such eHealth apps have been shown to improve outcomes and increase access to care, disease information, and support. These apps also help patients to participate actively in self-management, for example, by tracking adherence to treatment, changes in bladder and bowel habits, and activity and mood. For HCPs, MS eHealth solutions can simplify the multidisciplinary approaches needed to tailor MS management strategies to individual patients; facilitate remote monitoring of patient symptoms, adverse events, and outcomes; enable the efficient use of limited resources and clinic time; and potentially allow more timely intervention than is possible with scheduled face-to-face visits. These benefits are important because MS is a long-term, multifaceted chronic condition that requires ongoing monitoring, assessment, and management. We identified in the literature 28 eHealth solutions for patients with MS that fall within the four categories of screening and assessment, disease monitoring and self-management, treatment and rehabilitation, and advice and

29 CFR 1615.135 - Electronic and information technology requirements.

Science.gov (United States)

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false Electronic and information technology requirements. 1615... INFORMATION TECHNOLOGY § 1615.135 Electronic and information technology requirements. (a) Development, procurement, maintenance, or use of electronic and information technology.—When developing, procuring...

Connecting the Production Multiple

DEFF Research Database (Denmark)

Lichen, Alex Yu; Mouritsen, Jan

&OP process itself is a fluid object, but there is still possibility to organise the messy Production. There are connections between the Production multiple and the managerial technology fluid. The fluid enacted the multiplicity of Production thus making it more difficult to be organised because there were...... in opposite directions. They are all part of the fluid object. There is no single chain of circulating references that makes the object a matter of fact. Accounting fluidity means that references drift back and forth and enact new realities also connected to the chain. In this setting future research may......This paper is about objects. It follows post ANT trajectories and finds that objects are multiple and fluid. Extant classic ANT inspired accounting research largely sees accounting inscriptions as immutable mobiles. Although multiplicity of objects upon which accounting acts has been explored...

48 CFR 970.2770 - Technology Transfer.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Technology Transfer. 970.2770 Section 970.2770 Federal Acquisition Regulations System DEPARTMENT OF ENERGY AGENCY SUPPLEMENTARY REGULATIONS DOE MANAGEMENT AND OPERATING CONTRACTS Patents, Data, and Copyrights 970.2770 Technology Transfer. ...

48 CFR 235.006-70 - Manufacturing Technology Program.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Manufacturing Technology... CONTRACTING 235.006-70 Manufacturing Technology Program. In accordance with 10 U.S.C. 2521(d), for acquisitions under the Manufacturing Technology Program— (a) Award all contracts using competitive procedures...

Charged-particle multiplicities in B-meson decay

International Nuclear Information System (INIS)

Alam, M.S.; Csorna, S.E.; Fridman, A.; Hicks, R.G.; Panvini, R.S.; Andrews, D.; Avery, P.; Berkelman, K.; Cabenda, R.; Cassel, D.G.; DeWire, J.W.; Ehrlich, R.; Ferguson, T.; Gilchriese, M.G.D.; Gittelman, B.; Hartill, D.L.; Herrup, D.; Herzlinger, M.; Holzner, S.; Kandaswamy, J.; Kreinick, D.L.; Mistry, N.B.; Morrow, F.; Nordberg, E.; Perchonok, R.; Plunkett, R.; Silverman, A.; Stein, P.C.; Stone, S.; Weber, D.; Wilcke, R.; Sadoff, A.J.; Bebek, C.; Haggerty, J.; Hempstead, M.; Izen, J.M.; Loomis, W.A.; MacKay, W.W.; Pipkin, F.M.; Rohlf, J.; Tanenbaum, W.; Wilson, R.; Chadwick, K.; Chauveau, J.; Ganci, P.; Gentile, T.; Kagan, H.; Kass, R.; Melissinos, A.C.; Olsen, S.L.; Poling, R.; Rosenfeld, C.; Rucinski, G.; Thorndike, E.H.; Green, J.; Sannes, F.; Skubic, P.; Snyder, A.; Stone, R.; Brody, A.; Chen, A.; Goldberg, M.; Horwitz, N.; Lipari, P.; Kooy, H.; Moneti, G.C.; Pistilli, P.

1982-01-01

The charged multiplicity has been measured at the UPSILON(4S) and a value of 5.75 +- 0.1 +- 0.2 has been obtained for the mean charged multiplicity in B-meson decay. Combining this result with the measurement of prompt letpons from B decay, the values 4.1 +- 0.35 +- 0.2 and 6.3 +- 0.2 +- 0.2 are found for the semileptonic and nonleptonic charged multiplicities, respectively. If b→c dominance is assumed for the weak decay of the B meson, then the semileptonic multiplicity is consistent with the recoil mass determined from the lepton momentum spectrum

Connected health and multiple sclerosis.

Science.gov (United States)

Cohen, M

2018-04-18

There is as yet no consensual definition of "connected health". In general, the term refers to the growing use of technology and, in particular, mobile technology in medicine. Over the past 10 years, there have been an increasing number of published reports on the wide-ranging and heterogeneous fields involving the application of technology in medicine, ranging from telemedicine to tools to improve patients' evaluation and monitoring by physicians, as well as a multitude of patient-centered applications. They also represent promising tools in the field of clinical research. This report is a review of the importance of using this technology in the management of multiple sclerosis patients. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

14 CFR 1274.906 - Designation of New Technology Representative and Patent Representative.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Designation of New Technology... Conditions § 1274.906 Designation of New Technology Representative and Patent Representative. Designation of New Technology Representative and Patent Representative July 2002 (a) For purposes of administration...

40 CFR 230.74 - Actions related to technology.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Actions related to technology. 230.74 Section 230.74 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING SECTION... Minimize Adverse Effects § 230.74 Actions related to technology. Discharge technology should be adapted to...

Facilitating Multiple Intelligences Through Multimodal Learning Analytics

Directory of Open Access Journals (Sweden)

Ayesha PERVEEN

2018-01-01

Full Text Available This paper develops a theoretical framework for employing learning analytics in online education to trace multiple learning variations of online students by considering their potential of being multiple intelligences based on Howard Gardner’s 1983 theory of multiple intelligences. The study first emphasizes the need to facilitate students as multiple intelligences by online education systems and then suggests a framework of the advanced form of learning analytics i.e., multimodal learning analytics for tracing and facilitating multiple intelligences while they are engaged in online ubiquitous learning. As multimodal learning analytics is still an evolving area, it poses many challenges for technologists, educationists as well as organizational managers. Learning analytics make machines meet humans, therefore, the educationists with an expertise in learning theories can help technologists devise latest technological methods for multimodal learning analytics and organizational managers can implement them for the improvement of online education. Therefore, a careful instructional design based on a deep understanding of students’ learning abilities, is required to develop teaching plans and technological possibilities for monitoring students’ learning paths. This is how learning analytics can help design an adaptive instructional design based on a quick analysis of the data gathered. Based on that analysis, the academicians can critically reflect upon the quick or delayed implementation of the existing instructional design based on students’ cognitive abilities or even about the single or double loop learning design. The researcher concludes that the online education is multimodal in nature, has the capacity to endorse multiliteracies and, therefore, multiple intelligences can be tracked and facilitated through multimodal learning analytics in an online mode. However, online teachers’ training both in technological implementations and

2011 Mississippi Curriculum Framework: Postsecondary Agricultural Technician Technology. (Program CIP: 01.0201 - Agricultural Mechanics and Equipment/Machine Technology)

Science.gov (United States)

Massey, Jeremy; Louwerens, Shane; Galey, Joe

2011-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2007 Mississippi Curriculum Framework: Postsecondary Agricultural Mechanics Technology. (Program CIP: 01.0201 - Agricultural Mechanics and Equipment/Machine Technology)

Science.gov (United States)

Massey, Jeremy; Louwerens, Shane; Galey, Joe

2007-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

Building Adaptive Capacity of Pathways in Technology Early College High School Stakeholders: A Multiple-Case Study on the Influence of Performance, Leadership, and Organizational Learning

Science.gov (United States)

Michaud-Wells, Amy

2016-01-01

The purpose of this qualitative study was to explore the perceptions and beliefs of Pathways in Technology Early College High School (P-TECH) leaders and stakeholders regarding the personal and professional experiences that contributed to the development of adaptive capacity. This embedded multiple-case study was anchored by the interrelated…

The Ventriloquist's Dummy? The Role of Technology in Political Processes

DEFF Research Database (Denmark)

Koch, Christian

2000-01-01

technology and hire versa. In some phases, actors master the technology to the same extent as a ventriloquist masters his dummy. In other phases, however, actors Jinn themselves working hard, 'negotiating' with the technology. The management of technology is characterized as a consequence of these multiple......This article examines the active role of technology in political processes, drawing on organisational politics and sociology of technology. A case study of the processes of the management of technology demonstrates the multiple roles that technology plays in developing a promoting coalition...

Emerging Technological Risk Underpinning the Risk of Technology Innovation

CERN Document Server

Anderson, Stuart

2012-01-01

Classes of socio-technical hazards allow a characterization of the risk in technology innovation and clarify the mechanisms underpinning emergent technological risk. Emerging Technological Risk provides an interdisciplinary account of risk in socio-technical systems including hazards which highlight: ·         How technological risk crosses organizational boundaries, ·         How technological trajectories and evolution develop from resolving tensions emerging between social aspects of organisations and technologies and ·         How social behaviour shapes, and is shaped by, technology. Addressing an audience from a range of academic and professional backgrounds, Emerging Technological Risk is a key source for those who wish to benefit from a detail and methodical exposure to multiple perspectives on technological risk. By providing a synthesis of recent work on risk that captures the complex mechanisms that characterize the emergence of risk in technology innovation, Emerging Tec...

Location Study of Solar Thermal Power Plant in the State of Pernambuco Using Geoprocessing Technologies and Multiple-Criteria Analysis

Directory of Open Access Journals (Sweden)

Verônica Wilma B. Azevêdo

2017-07-01

Full Text Available Solar Thermal Technology for the generation of electricity in large scale has been a reality in the world since the 1980s, when the first large-sized solar plants in the United States were introduced. Brazil presents great potential for the development of large-scale projects, although it is noted that the main barriers for the insertion of this technology in Brazilian market are the lack of incentives and goals and associated costs. In a way to contribute to the insertion of solar thermal technology in Brazil, this paper presents a macro-spatial approach, based on the use of Multiple-Criteria Decision Analysis and Geoprocessing, for the location of solar thermal power plants. The applied methodology for Pernambuco, located in the Northeast Region of Brazil, considered the implantation of parabolic trough solar power plant of 80 MW, operating only in solar mode, without heat storage. Based on performed analysis, it was confirmed that Pernambuco presents great potential for the installation of solar power plants, especially in the backlands of Pernambuco. Performed validations in the model demonstrate that the methodology attended the objective once the consistence between the assigned weights to the thematic layers, individually, and the final Map of site suitability were evidenced.

Measuring process solutions in a reprocessing plant to 0.1%

International Nuclear Information System (INIS)

Crawford, J.M.; Ehinger, M.H.; Ellis, J.H.

1980-03-01

Measurement of SNM in reprocessing plant solutions involves two major problems; measurement of bulk solution quantities and analysis of highly radioactive samples. It has been shown at the BNFP that bulk measurements can be made routinely under operating conditions to less than 0.1% total uncertainty. Two specific advances in measurement technology have been largely responsible for this improved performance. The quartz bourdon tube electromanometer replaces the fluid manometer for differential pressure measurements. The vibrating tube densimeter provides accurate measurement of density in lab samples. These instruments, coupled with a rigorous measurement and quality control procedures, are the means to achieve better than 0.1% performance

20 CFR 345.403 - Multiple base year employers.

Science.gov (United States)

2010-04-01

..., benefits will be charged in reverse chronological order, but the amount charged to each base year employer...) In all other cases, benefits will be charged in the same ratio as the compensation paid to such... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Multiple base year employers. 345.403 Section...

6 CFR 25.4 - Designation of qualified anti-terrorism technologies.

Science.gov (United States)

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Designation of qualified anti-terrorism... REGULATIONS TO SUPPORT ANTI-TERRORISM BY FOSTERING EFFECTIVE TECHNOLOGIES § 25.4 Designation of qualified anti-terrorism technologies. (a) General. The Under Secretary may Designate as a Qualified Anti-Terrorism...

48 CFR 2452.239-71 - Information Technology Virus Security.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Information Technology... Provisions and Clauses 2452.239-71 Information Technology Virus Security. As prescribed in 2439.107(b), insert the following clause: Information Technology Virus Security (FEB 2006) (a) The contractor hereby...

15 CFR 971.604 - Best available technologies (BAT) and mitigation.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Best available technologies (BAT) and... Environmental Effects § 971.604 Best available technologies (BAT) and mitigation. (a) The Administrator shall..., NOAA is unable either to specify particular equipment or procedures comprising BAT or to define...

Simultaneous control of multiple instruments at the Advanced Technology Solar Telescope

Science.gov (United States)

Johansson, Erik M.; Goodrich, Bret

2012-09-01

The Advanced Technology Solar Telescope (ATST) is a 4-meter solar observatory under construction at Haleakala, Hawaii. The simultaneous use of multiple instruments is one of the unique capabilities that makes the ATST a premier ground based solar observatory. Control of the instrument suite is accomplished by the Instrument Control System (ICS), a layer of software between the Observatory Control System (OCS) and the instruments. The ICS presents a single narrow interface to the OCS and provides a standard interface for the instruments to be controlled. It is built upon the ATST Common Services Framework (CSF), an infrastructure for the implementation of a distributed control system. The ICS responds to OCS commands and events, coordinating and distributing them to the various instruments while monitoring their progress and reporting the status back to the OCS. The ICS requires no specific knowledge about the instruments. All information about the instruments used in an experiment is passed by the OCS to the ICS, which extracts and forwards the parameters to the appropriate instrument controllers. The instruments participating in an experiment define the active instrument set. A subset of those instruments must complete their observing activities in order for the experiment to be considered complete and are referred to as the must-complete instrument set. In addition, instruments may participate in eavesdrop mode, outside of the control of the ICS. All instrument controllers use the same standard narrow interface, which allows new instruments to be added without having to modify the interface or any existing instrument controllers.

CARs in the Lead Against Multiple Myeloma

DEFF Research Database (Denmark)

Ormhøj, Maria; Bedoya, Felipe; Frigault, Matthew J.

2017-01-01

The recent clinical success of CD19-directed chimeric antigen receptor (CAR) T cell therapy in chronic and acute leukemia has led to increased interest in broadening this technology to other hematological malignancies and solid tumors. Now, advances are being made using CAR T cell technology...... to target myeloma antigens such as B cell maturation antigen (BCMA), CD138, and kappa-light chain as well as CD19 on putative myeloma stem cells. To date, only a limited number of multiple myeloma patients have received CAR T cell therapy but preliminary results have been encouraging. In this review, we...... summarize the recently reported results of clinical trials conducted utilizing CAR T cell therapy in multiple myeloma (MM)....

High-speed autoverifying technology for printed wiring boards

Science.gov (United States)

Ando, Moritoshi; Oka, Hiroshi; Okada, Hideo; Sakashita, Yorihiro; Shibutani, Nobumi

1996-10-01

We have developed an automated pattern verification technique. The output of an automated optical inspection system contains many false alarms. Verification is needed to distinguish between minor irregularities and serious defects. In the past, this verification was usually done manually, which led to unsatisfactory product quality. The goal of our new automated verification system is to detect pattern features on surface mount technology boards. In our system, we employ a new illumination method, which uses multiple colors and multiple direction illumination. Images are captured with a CCD camera. We have developed a new algorithm that uses CAD data for both pattern matching and pattern structure determination. This helps to search for patterns around a defect and to examine defect definition rules. These are processed with a high speed workstation and a hard-wired circuits. The system can verify a defect within 1.5 seconds. The verification system was tested in a factory. It verified 1,500 defective samples and detected all significant defects with only a 0.1 percent of error rate (false alarm).

Data-Base Software For Tracking Technological Developments

Science.gov (United States)

Aliberti, James A.; Wright, Simon; Monteith, Steve K.

1996-01-01

Technology Tracking System (TechTracS) computer program developed for use in storing and retrieving information on technology and related patent information developed under auspices of NASA Headquarters and NASA's field centers. Contents of data base include multiple scanned still images and quick-time movies as well as text. TechTracS includes word-processing, report-editing, chart-and-graph-editing, and search-editing subprograms. Extensive keyword searching capabilities enable rapid location of technologies, innovators, and companies. System performs routine functions automatically and serves multiple users.

Multiple Perspectives / Multiple Readings

Directory of Open Access Journals (Sweden)

Simon Biggs

2005-01-01

Full Text Available People experience things from their own physical point of view. What they see is usually a function of where they are and what physical attitude they adopt relative to the subject. With augmented vision (periscopes, mirrors, remote cameras, etc we are able to see things from places where we are not present. With time-shifting technologies, such as the video recorder, we can also see things from the past; a time and a place we may never have visited.In recent artistic work I have been exploring the implications of digital technology, interactivity and internet connectivity that allow people to not so much space/time-shift their visual experience of things but rather see what happens when everybody is simultaneously able to see what everybody else can see. This is extrapolated through the remote networking of sites that are actual installation spaces; where the physical movements of viewers in the space generate multiple perspectives, linked to other similar sites at remote locations or to other viewers entering the shared data-space through a web based version of the work.This text explores the processes involved in such a practice and reflects on related questions regarding the non-singularity of being and the sense of self as linked to time and place.

17 CFR 200.26a - Office of Information Technology.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Office of Information Technology. 200.26a Section 200.26a Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION... Organization § 200.26a Office of Information Technology. The Office of Information Technology is responsible...

34 CFR 300.6 - Assistive technology service.

Science.gov (United States)

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Assistive technology service. 300.6 Section 300.6 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION... selection, acquisition, or use of an assistive technology device. The term includes— (a) The evaluation of...

Multiple Criteria and Multiple Periods Performance Analysis: The Comparison of North African Railways

Science.gov (United States)

Sabri, Karim; Colson, Gérard E.; Mbangala, Augustin M.

2008-10-01

Multi-period differences of technical and financial performances are analysed by comparing five North African railways over the period (1990-2004). A first approach is based on the Malmquist DEA TFP index for measuring the total factors productivity change, decomposed into technical efficiency change and technological changes. A multiple criteria analysis is also performed using the PROMETHEE II method and the software ARGOS. These methods provide complementary detailed information, especially by discriminating the technological and management progresses by Malmquist and the two dimensions of performance by Promethee: that are the service to the community and the enterprises performances, often in conflict.

WE-AB-BRB-01: Memorial Introduction; Storage Phosphor Panels for Radiation Therapy Dosimetry

Energy Technology Data Exchange (ETDEWEB)

Li, H. [Washington University School of Medicine (United States)

2016-06-15

Despite widespread IMRT treatments at modern radiation therapy clinics, precise dosimetric commissioning of an IMRT system remains a challenge. In the most recent report from the Radiological Physics Center (RPC), nearly 20% of institutions failed an end-to-end test with an anthropomorphic head and neck phantom, a test that has rather lenient dose difference and distance-to-agreement criteria of 7% and 4 mm. The RPC report provides strong evidence that IMRT implementation is prone to error and that improved quality assurance tools are required. At the heart of radiation therapy dosimetry is the multidimensional dosimeter. However, due to the limited availability of water-equivalent dosimetry materials, research and development in this important field is challenging. In this session, we will review a few dosimeter developments that are either in the laboratory phase or in the pre-commercialization phase. 1) Radiochromic plastic. Novel formulations exhibit light absorbing optical contrast with very little scatter, enabling faster, broad beam optical CT design. 2) Storage phosphor. After irradiation, the dosimetry panels will be read out using a dedicated 2D scanning apparatus in a non-invasive, electro-optic manner and immediately restored for further use. 3) Liquid scintillator. Scintillators convert the energy from x-rays and proton beams into visible light, which can be recorded with a scientific camera (CCD or CMOS) from multiple angles. The 3D shape of the dose distribution can then be reconstructed. 4) Cherenkov emission imaging. Gated intensified imaging allows video-rate passive detection of Cherenkov emission during radiation therapy with the room lights on. Learning Objectives: To understand the physics of a variety of dosimetry techniques based upon optical imaging To investigate the strategies to overcome respective challenges and limitations To explore novel ideas of dosimeter design Supported in part by NIH Grants R01CA148853, R01CA182450, R01CA109558

WE-AB-BRB-01: Memorial Introduction; Storage Phosphor Panels for Radiation Therapy Dosimetry

International Nuclear Information System (INIS)

Li, H.

2016-01-01

Despite widespread IMRT treatments at modern radiation therapy clinics, precise dosimetric commissioning of an IMRT system remains a challenge. In the most recent report from the Radiological Physics Center (RPC), nearly 20% of institutions failed an end-to-end test with an anthropomorphic head and neck phantom, a test that has rather lenient dose difference and distance-to-agreement criteria of 7% and 4 mm. The RPC report provides strong evidence that IMRT implementation is prone to error and that improved quality assurance tools are required. At the heart of radiation therapy dosimetry is the multidimensional dosimeter. However, due to the limited availability of water-equivalent dosimetry materials, research and development in this important field is challenging. In this session, we will review a few dosimeter developments that are either in the laboratory phase or in the pre-commercialization phase. 1) Radiochromic plastic. Novel formulations exhibit light absorbing optical contrast with very little scatter, enabling faster, broad beam optical CT design. 2) Storage phosphor. After irradiation, the dosimetry panels will be read out using a dedicated 2D scanning apparatus in a non-invasive, electro-optic manner and immediately restored for further use. 3) Liquid scintillator. Scintillators convert the energy from x-rays and proton beams into visible light, which can be recorded with a scientific camera (CCD or CMOS) from multiple angles. The 3D shape of the dose distribution can then be reconstructed. 4) Cherenkov emission imaging. Gated intensified imaging allows video-rate passive detection of Cherenkov emission during radiation therapy with the room lights on. Learning Objectives: To understand the physics of a variety of dosimetry techniques based upon optical imaging To investigate the strategies to overcome respective challenges and limitations To explore novel ideas of dosimeter design Supported in part by NIH Grants R01CA148853, R01CA182450, R01CA109558

Individual case safety reports--how to determine the onset date of an adverse reaction: a survey.

Science.gov (United States)

Klepper, Michael J; Edwards, Brian

2011-04-01

The building blocks of a pharmacovigilance system depend primarily on good quality individual case safety reports (ICSRs), which are stand-alone summaries describing one or more suspected adverse reactions that occur while a subject is taking either an investigational or marketed medicinal product and may require expedited reporting to regulatory authorities. For regulatory reporting purposes, the information of an ICSR is usually captured on forms such as MedWatch 3500/3500A, CIOMS I, Vaccine Adverse Event Report System (VAERS) or Adverse Events Following Immunization (AEFI). ICSRs that are sent electronically must meet the standards for electronic transmission specified in the International Conference on Harmonisation (ICH) E2B (R2) guideline. In filling out these regulatory forms, there are some areas of ambiguity. One of these is what the 'date of event' (MedWatch) or 'reaction onset date' (CIOMS) is interpreted to be. The aim of the survey was to determine the uniformity of responses for the onset date of an adverse reaction. A pilot and three surveys of pharmacovigilance professionals were undertaken between February and July 2009 to determine the range of responses for the onset of an adverse reaction. A narrative of a subject admitted to hospital with a diagnosis of pneumonia was presented and the respondent was asked to pick the date of onset of the adverse reaction. The total number of respondents was 129. The results of the surveys indicated there was considerable variation in responses. These differences were based on different perspectives regarding the suspected adverse reaction. Some viewed the 'reaction' to be the first onset of signs and symptoms (even if non-specific), others considered the onset of the reaction to be the date of the diagnosis, while others considered the date to be when the reaction became serious. By means of a survey, we have illustrated an example of the variability of determining the onset date of a suspected adverse reaction

Three-Dimensional Terahertz Coded-Aperture Imaging Based on Single Input Multiple Output Technology

Directory of Open Access Journals (Sweden)

Shuo Chen

2018-01-01

Full Text Available As a promising radar imaging technique, terahertz coded-aperture imaging (TCAI can achieve high-resolution, forward-looking, and staring imaging by producing spatiotemporal independent signals with coded apertures. In this paper, we propose a three-dimensional (3D TCAI architecture based on single input multiple output (SIMO technology, which can reduce the coding and sampling times sharply. The coded aperture applied in the proposed TCAI architecture loads either purposive or random phase modulation factor. In the transmitting process, the purposive phase modulation factor drives the terahertz beam to scan the divided 3D imaging cells. In the receiving process, the random phase modulation factor is adopted to modulate the terahertz wave to be spatiotemporally independent for high resolution. Considering human-scale targets, images of each 3D imaging cell are reconstructed one by one to decompose the global computational complexity, and then are synthesized together to obtain the complete high-resolution image. As for each imaging cell, the multi-resolution imaging method helps to reduce the computational burden on a large-scale reference-signal matrix. The experimental results demonstrate that the proposed architecture can achieve high-resolution imaging with much less time for 3D targets and has great potential in applications such as security screening, nondestructive detection, medical diagnosis, etc.

Use of multiple sensor technologies for quality control of in situ biogeochemical measurements: A SeaCycler case study

Science.gov (United States)

Atamanchuk, Dariia; Koelling, Jannes; Lai, Jeremy; Send, Uwe; Wallace, Douglas

2017-04-01

Over the last two decades observing capacity for the global ocean has increased dramatically. Emerging sensor technologies for dissolved gases, nutrients and bio-optical properties in seawater are allowing extension of in situ observations beyond the traditionally measured salinity, temperature and pressure (CTD). However the effort to extend observations using autonomous instruments and platforms carries the risk of losing the level of data quality achievable through conventional water sampling techniques. We will present results from a case study with the SeaCycler profiling winch focusing on quality control of the in-situ measurements. A total of 13 sensors were deployed from May 2016 to early 2017 on SeaCycler's profiling sensor float, including CTD, dissolved oxygen (O2, 3 sensors), carbon dioxide (pCO2, 2 sensors), nutrients, velocity sensors, fluorometer, transmissometer, single channel PAR sensor, and others. We will highlight how multiple measurement technologies (e.g. for O2 and CO2) complement each other and result in a high quality data product. We will also present an initial assessment of the bio-optical data, their implications for seasonal phytoplankton dynamics and comparisons to climatologies and ocean-color data products obtained from the MODIS satellite.

Complete Genome Sequence of the Probiotic Strain Lactobacillus salivarius LPM01.

Science.gov (United States)

Chenoll, Empar; Codoñer, Francisco M; Martinez-Blanch, Juan F; Acevedo-Piérart, Marcelo; Ormeño, M Loreto; Ramón, Daniel; Genovés, Salvador

2016-11-23

Lactobacillus salivarius LPM01 (DSM 22150) is a probiotic strain able to improve health status in immunocompromised people. Here, we report its complete genome sequence deciphered by PacBio single-molecule real-time (SMRT) technology. Analysis of the sequence may provide insights into its functional activity and safety assessment. Copyright © 2016 Chenoll et al.

Complementary technologies for verification of excess plutonium

International Nuclear Information System (INIS)

Langner, D.G.; Nicholas, N.J.; Ensslin, N.; Fearey, B.L.; Mitchell, D.J.; Marlow, K.W.; Luke, S.J.; Gosnell, T.B.

1998-01-01

Three complementary measurement technologies have been identified as candidates for use in the verification of excess plutonium of weapons origin. These technologies: high-resolution gamma-ray spectroscopy, neutron multiplicity counting, and low-resolution gamma-ray spectroscopy, are mature, robust technologies. The high-resolution gamma-ray system, Pu-600, uses the 630--670 keV region of the emitted gamma-ray spectrum to determine the ratio of 240 Pu to 239 Pu. It is useful in verifying the presence of plutonium and the presence of weapons-grade plutonium. Neutron multiplicity counting is well suited for verifying that the plutonium is of a safeguardable quantity and is weapons-quality material, as opposed to residue or waste. In addition, multiplicity counting can independently verify the presence of plutonium by virtue of a measured neutron self-multiplication and can detect the presence of non-plutonium neutron sources. The low-resolution gamma-ray spectroscopic technique is a template method that can provide continuity of knowledge that an item that enters the a verification regime remains under the regime. In the initial verification of an item, multiple regions of the measured low-resolution spectrum form a unique, gamma-radiation-based template for the item that can be used for comparison in subsequent verifications. In this paper the authors discuss these technologies as they relate to the different attributes that could be used in a verification regime

MO-PIS-Exhibit Hall-01: Imaging: CT Dose Optimization Technologies I

Energy Technology Data Exchange (ETDEWEB)

Denison, K; Smith, S [GE Healthcare, Waukesha, WI (United States)

2014-06-15

Partners in Solutions is an exciting new program in which AAPM partners with our vendors to present practical “hands-on” information about the equipment and software systems that we use in our clinics. The imaging topic this year is CT scanner dose optimization capabilities. Note that the sessions are being held in a special purpose room built on the Exhibit Hall Floor, to encourage further interaction with the vendors. Dose Optimization Capabilities of GE Computed Tomography Scanners Presentation Time: 11:15 – 11:45 AM GE Healthcare is dedicated to the delivery of high quality clinical images through the development of technologies, which optimize the application of ionizing radiation. In computed tomography, dose management solutions fall into four categories: employs projection data and statistical modeling to decrease noise in the reconstructed image - creating an opportunity for mA reduction in the acquisition of diagnostic images. Veo represents true Model Based Iterative Reconstruction (MBiR). Using high-level algorithms in tandem with advanced computing power, Veo enables lower pixel noise standard deviation and improved spatial resolution within a single image. Advanced Adaptive Image Filters allow for maintenance of spatial resolution while reducing image noise. Examples of adaptive image space filters include Neuro 3-D filters and Cardiac Noise Reduction Filters. AutomA adjusts mA along the z-axis and is the CT equivalent of auto exposure control in conventional x-ray systems. Dynamic Z-axis Tracking offers an additional opportunity for dose reduction in helical acquisitions while SmartTrack Z-axis Tracking serves to ensure beam, collimator and detector alignment during tube rotation. SmartmA provides angular mA modulation. ECG Helical Modulation reduces mA during the systolic phase of the heart cycle. SmartBeam optimization uses bowtie beam-shaping hardware and software to filter off-axis x-rays - minimizing dose and reducing x-ray scatter. The

MO-PIS-Exhibit Hall-01: Imaging: CT Dose Optimization Technologies I

International Nuclear Information System (INIS)

Denison, K; Smith, S

2014-01-01

Partners in Solutions is an exciting new program in which AAPM partners with our vendors to present practical “hands-on” information about the equipment and software systems that we use in our clinics. The imaging topic this year is CT scanner dose optimization capabilities. Note that the sessions are being held in a special purpose room built on the Exhibit Hall Floor, to encourage further interaction with the vendors. Dose Optimization Capabilities of GE Computed Tomography Scanners Presentation Time: 11:15 – 11:45 AM GE Healthcare is dedicated to the delivery of high quality clinical images through the development of technologies, which optimize the application of ionizing radiation. In computed tomography, dose management solutions fall into four categories: employs projection data and statistical modeling to decrease noise in the reconstructed image - creating an opportunity for mA reduction in the acquisition of diagnostic images. Veo represents true Model Based Iterative Reconstruction (MBiR). Using high-level algorithms in tandem with advanced computing power, Veo enables lower pixel noise standard deviation and improved spatial resolution within a single image. Advanced Adaptive Image Filters allow for maintenance of spatial resolution while reducing image noise. Examples of adaptive image space filters include Neuro 3-D filters and Cardiac Noise Reduction Filters. AutomA adjusts mA along the z-axis and is the CT equivalent of auto exposure control in conventional x-ray systems. Dynamic Z-axis Tracking offers an additional opportunity for dose reduction in helical acquisitions while SmartTrack Z-axis Tracking serves to ensure beam, collimator and detector alignment during tube rotation. SmartmA provides angular mA modulation. ECG Helical Modulation reduces mA during the systolic phase of the heart cycle. SmartBeam optimization uses bowtie beam-shaping hardware and software to filter off-axis x-rays - minimizing dose and reducing x-ray scatter. The

Technology Integration in Science Education: A Study of How Teachers Use Modern Learning Technologies in Biology Classrooms

Science.gov (United States)

Gnanakkan, Dionysius Joseph

2017-01-01

This multiple case-study investigated how high school biology teachers used modern learning technologies (probes, interactive simulations and animations, animated videos) in their classrooms and why they used the learning technologies. Another objective of the study was to assess whether the use of learning technologies alleviated misconceptions…

Evaluating New Technology.

Science.gov (United States)

Carniol, Paul J; Heffelfinger, Ryan N; Grunebaum, Lisa D

2018-05-01

There are multiple complex issues to consider when evaluating any new technology. First evaluate the efficacy of the device. Then considering your patient population decide whether this technology brings an added benefit to your patients. If it meets these 2 criteria, then proceed to the financial analysis of acquiring this technology. The complete financial analysis has several important components that include but are not limited to cost, value, alternatives, return on investment, and associated marketing expense. Copyright © 2018 Elsevier Inc. All rights reserved.

48 CFR 27.204 - Patented technology under trade agreements.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Patented technology under trade agreements. 27.204 Section 27.204 Federal Acquisition Regulations System FEDERAL ACQUISITION... Patented technology under trade agreements. ...

Learning What Works in Educational Technology with a Case Study of EDUSTAR. Policy Memo 2016-01

Science.gov (United States)

Chatterji, Aaron K.; Jones, Benjamin F.

2016-01-01

Despite much fanfare, new technologies have yet to fundamentally advance student outcomes in K-12 schools or other educational settings. We believe that the system that supports the development and dissemination of educational technology tools is falling short. The key missing ingredient is rigorous evaluation. No one knows what works and for…

Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For the application of photon to industrial technologies, in particular, a hard photon technology was surveyed which uses photon beams of 0.1-200nm in wavelength. Its features such as selective atom reaction, dense inner shell excitation and spacial high resolution by quantum energy are expected to provide innovative techniques for various field such as fine machining, material synthesis and advanced inspection technology. This wavelength region has been hardly utilized for industrial fields because of poor development of suitable photon sources and optical devices. The developmental meaning, usable time and issue of a hard photon reduction lithography were surveyed as lithography in ultra-fine region below 0.1{mu}m. On hard photon analysis/evaluation technology, the industrial use of analysis, measurement and evaluation technologies by micro-beam was viewed, and optimum photon sources and optical systems were surveyed. Prediction of surface and surface layer modification by inner shell excitation, the future trend of this process and development of a vacuum ultraviolet light source were also surveyed. 383 refs., 153 figs., 17 tabs.

39 CFR 255.4 - Accessibility to electronic and information technology.

Science.gov (United States)

2010-07-01

... AND INFORMATION TECHNOLOGY § 255.4 Accessibility to electronic and information technology. (a) In... burden, that the electronic and information technology the agency procures allows— (1) Individuals with... 39 Postal Service 1 2010-07-01 2010-07-01 false Accessibility to electronic and information...

49 CFR 232.503 - Process to introduce new brake system technology.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Process to introduce new brake system technology... Technology § 232.503 Process to introduce new brake system technology. (a) Pursuant to the procedures... brake system technology, prior to implementing the plan. (b) Each railroad shall complete a pre-revenue...

Novel 3-D Analysis for the Assessment of Cleft Dimensions on Digital Models of Infants With Unilateral Cleft Lip and Palate

DEFF Research Database (Denmark)

Botticelli, Susanna; Pedersen, Thomas Klit; Küseler, Annelise

2018-01-01

OBJECTIVE: To present a 3-D standardized analysis of cleft dimensions. MATERIALS: Thirty-one plaster casts of unilateral cleft lip and palate (UCLP) infants were laser scanned. Landmarks and coordinate system were defined. Linear distances and surfaces were measured, and the ratio between cleft...... and palatal area was calculated (3-D infant cleft severity ratio [3D ICSR]). The digitally measured areas were compared with silicone membranes, adapted to the plaster casts, and analyzed by optic microscopy. MAIN OUTCOME MEASURES: Repeatability, reproducibility, and validity. RESULTS: Bland-Altman plots...

Strategies to reduce hyperthermia in ambulatory multiple sclerosis patients.

Science.gov (United States)

Edlich, Richard F; Buschbacher, Ralph M; Cox, Mary Jude; Long, William B; Winters, Kathryne L; Becker, Daniel G

2004-01-01

Approximately 400,000 Americans have multiple sclerosis. Worldwide, multiple sclerosis affects 2.5 million individuals. Multiple sclerosis affects two to three times as many women as men. The adverse effects of hyperthermia in patients with multiple sclerosis have been known since 1890. While most patients with multiple sclerosis experience reversible worsening of their neurologic deficits, some patients experience irreversible neurologic deficits. In fact, heat-induced fatalities have been encountered in multiple sclerosis patients subjected to hyperthermia. Hyperthermia can be caused through sun exposure, exercise, and infection. During the last 50 years, numerous strategies have evolved to reduce hyperthermia in individuals with multiple sclerosis, such as photoprotective clothing, sunglasses, sunscreens, hydrotherapy, and prevention of urinary tract infections. Hydrotherapy has become an essential component of rehabilitation for multiple sclerosis patients in hospitals throughout the world. On the basis of this positive hospital experience, hydrotherapy has been expanded through the use of compact aquatic exercise pools at home along with personal cooling devices that promote local and systemic hypothermia in multiple sclerosis patients. The Multiple Sclerosis Association of America and NASA have played leadership roles in developing and recommending technology that will prevent hyperthermia in multiple sclerosis patients and should be consulted for new technological advances that will benefit the multiple sclerosis patient. In addition, products recommended for photoprotection by The Skin Cancer Foundation may also be helpful to the multiple sclerosis patient's defense against hyperthermia. Infections in the urinary tract, especially detrusor-external sphincter dyssynergia, are initially managed conservatively with intermittent self-catheterization and pharmacologic therapy. In those cases, refractory to conservative therapy, transurethral external

42 CFR 137.327 - May multiple projects be included in a single construction project agreement?

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false May multiple projects be included in a single construction project agreement? 137.327 Section 137.327 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF...-GOVERNANCE Construction Project Assumption Process § 137.327 May multiple projects be included in a single...

Single-embryo transfer versus multiple-embryo transfer.

Science.gov (United States)

Gerris, Jan

2009-01-01

Despite the progress made in assisted reproductive technology, live birth rates remain disappointingly low. Multiple-embryo transfer has been an accepted practice with which to increase the success rate. This has led to a higher incidence of multiple-order births compared with natural conception, which not only increase the risk of mortality and morbidity to both mother and children but are also associated with social and economic consequences. Elective single-embryo transfer (eSET) was developed in an effort to increase singleton pregnancies in assisted reproduction. Studies comparing eSET with multiple-embryo transfer highlight the benefit of this approach and suggest that, with careful patient selection and the transfer of good-quality embryos, the risk of a multiple-order pregnancy can be reduced without significantly decreasing live birth rates. Although the use of eSET has gradually increased in clinical practice, its acceptance has been limited by factors such as availability of funding and awareness of the procedure. An open discussion of eSET is warranted in an effort to enable a broader understanding by physicians and patients of the merits of this approach. Ultimately, eSET may provide a more cost-effective, potentially safer approach to patients undergoing assisted reproduction technology.

Networked Constellation Communications Technologies

Data.gov (United States)

National Aeronautics and Space Administration — Develop communications architectures and enabling technologies for mission concepts relying on multiple spatially distributed spacecraft to perform coordinated...

Preliminary A ampersand PCT multiple detector design

International Nuclear Information System (INIS)

Roberson, G.P.; Martz, H.E.; Camp, D.C.; Decman, D.J.; Johansson, E.M.

1997-01-01

The next generation, multi-detector active and passive computed tomography (A ampersand PCT) scanner will be optimized for speed and accuracy. At the Lawrence Livermore National Lab (LLNL) we have demonstrated the trade-offs between different A ampersand PCT design parameters that affect the speed and quality of the assay results. These fundamental parameters govern the optimum system design. Although the multi-detector scanner design has priority put on speed to increase waste drum throughput, higher speed should not compromise assay accuracy. One way to increase the speed of the A ampersand PCT technology is to use multiple detectors. This yields a linear speedup by a factor approximately equal to the number of detectors used without a compromise in system accuracy. There are many different design scenarios that can be developed using multiple detectors. Here we describe four different scenarios and discuss the trade-offs between them. Also, some considerations are given in this design description for the implementation of a multiple detector technology in a field- deployable mobile trailer system

Detection of subclinical atherosclerosis in asymptomatic subjects using ultrasound radiofrequency-tracking technology.

Directory of Open Access Journals (Sweden)

Lili Niu

Full Text Available Atherosclerosis is a chronic and systemic disease and its developmental process involves the synergism of multiple risk factors such as hypertension, dyslipidemia, diabetes, obesity and smoking. The diagnosis of subclinical atherosclerosis is essential for strategic guidance towards suitable treatments and efficient prevention against acute cardiovascular events. This study employed ultrasound radiofrequency (RF tracking technology to characterize human carotid arteries in vivo in terms of intima-media thickness (IMT and artery stiffness, and evaluated the statistical correlation between carotid IMT and stiffness, and the number of risk factors for atherosclerosis.A total of 160 asymptomatic subjects were enrolled. Ultrasound RF-tracking technology was employed to acquire carotid IMT and stiffness parameters: maximum IMT ((MAXIMT, RF Quality IMT ((RFQIMT, distensibility coefficient (DC, compliance coefficient (CC, αindex, β index and local pulse wave velocity (PWVβ. The subjects were categorized in four groups in terms of the number of risk factors: 'zero', 'single', 'double', and 'multiple', and statistical analyses of carotid IMT and stiffness parameters were performed between these different groups.The subjects (n = 145 with (MAXIMT smaller than 1.0 mm matched the IMT criteria for non-atherosclerosis and were named as NA-subjects. Spearman's rho correlation analysis of the whole group and the NA-subjects both showed that (MAXIMT correlated positively with (RFQIMT, α, β, and PWVβ, and negatively with DC and CC (p<0.01. The analysis of covariance of NA-subjects showed significant differences between subjects with and without risk factors, and also showed significant differences between the 'zero', 'single', 'double', and 'multiple' groups.The carotid IMT and stiffness parameters obtained by the ultrasound RF-tracking technology were demonstrated to possess significant statistical correlation with the number of risk factors from 160

MO-E-BRF-01: Research Opportunities in Technology for Innovation in Radiation Oncology (Highlight of ASTRO NCI 2013 Workshop)

International Nuclear Information System (INIS)

Hahn, S; Jaffray, D; Chetty, I; Benedict, S

2014-01-01

Radiotherapy is one of the most effective treatments for solid tumors, in large part due to significant technological advances associated with, for instance, the ability to target tumors to very high levels of accuracy (within millimeters). Technological advances have played a central role in the success of radiation therapy as an oncologic treatment option for patients. ASTRO, AAPM and NCI sponsored a workshop “Technology for Innovation in Radiation Oncology” at the NCI campus in Bethesda, MD on June 13–14, 2013. The purpose of this workshop was to bring together expert clinicians and scientists to discuss the role of disruptive technologies in radiation oncology, in particular with regard to how they are being developed and translated to clinical practice in the face of current and future challenges and opportunities. The technologies discussed encompassed imaging and delivery aspects, along with methods to enable/facilitate application of them in the clinic. Measures for assessment of the performance of these technologies, such as techniques to validate quantitative imaging, were reviewed. Novel delivery technologies, incorporating efficient and safe delivery mechanisms enabled by development of tools for process automation and the associated field of oncology informatics formed one of the central themes of the workshop. The discussion on disruptive technologies was grounded in the need for evidence of efficacy. Scientists in the areas of technology assessment and bioinformatics provided expert views on different approaches toward evaluation of technology efficacy. Clinicians well versed in clinical trials incorporating disruptive technologies (e.g. SBRT for early stage lung cancer) discussed the important role of these technologies in significantly improving local tumor control and survival for these cohorts of patients. Recommendations summary focused on the opportunities associated with translating the technologies into the clinic and assessing their

MO-E-BRF-01: Research Opportunities in Technology for Innovation in Radiation Oncology (Highlight of ASTRO NCI 2013 Workshop)

Energy Technology Data Exchange (ETDEWEB)

Hahn, S [University of Pennsylvania, Philadelphia, PA (United States); Jaffray, D [Princess Margaret Hospital, Toronto, ON (Canada); Chetty, I [Henry Ford Health System, Detroit, MI (United States); Benedict, S [UC Davis Cancer Center, Sacramento, CA (United States)

2014-06-15

Radiotherapy is one of the most effective treatments for solid tumors, in large part due to significant technological advances associated with, for instance, the ability to target tumors to very high levels of accuracy (within millimeters). Technological advances have played a central role in the success of radiation therapy as an oncologic treatment option for patients. ASTRO, AAPM and NCI sponsored a workshop “Technology for Innovation in Radiation Oncology” at the NCI campus in Bethesda, MD on June 13–14, 2013. The purpose of this workshop was to bring together expert clinicians and scientists to discuss the role of disruptive technologies in radiation oncology, in particular with regard to how they are being developed and translated to clinical practice in the face of current and future challenges and opportunities. The technologies discussed encompassed imaging and delivery aspects, along with methods to enable/facilitate application of them in the clinic. Measures for assessment of the performance of these technologies, such as techniques to validate quantitative imaging, were reviewed. Novel delivery technologies, incorporating efficient and safe delivery mechanisms enabled by development of tools for process automation and the associated field of oncology informatics formed one of the central themes of the workshop. The discussion on disruptive technologies was grounded in the need for evidence of efficacy. Scientists in the areas of technology assessment and bioinformatics provided expert views on different approaches toward evaluation of technology efficacy. Clinicians well versed in clinical trials incorporating disruptive technologies (e.g. SBRT for early stage lung cancer) discussed the important role of these technologies in significantly improving local tumor control and survival for these cohorts of patients. Recommendations summary focused on the opportunities associated with translating the technologies into the clinic and assessing their

48 CFR 311.7000 - Defining electronic information technology requirements.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Defining electronic information technology requirements. 311.7000 Section 311.7000 Federal Acquisition Regulations System HEALTH... Accessibility Standards 311.7000 Defining electronic information technology requirements. HHS staff that define...

Value Creation, Appropriation, and Product Design Strategies in Technology Ecosystems: Three Essays on the Role of Complementary Technologies

Science.gov (United States)

Miller, Cameron Dee

2017-01-01

Firms are often embedded in a technology ecosystem comprised of complementary technologies that span multiple product markets. In this dissertation, I examine how complementarity between the firm's technologies influences its strategies to create and appropriate value in the ecosystem. I investigate this overarching question in two contexts:…

Multipl Pregnancies and Their Complications

Directory of Open Access Journals (Sweden)

Volkan Turan

2011-03-01

Full Text Available Objective: To investigate the complications observed in multipl pregnancies which are increasing in day by day. Material and method: We reviewed 173 multiple pregnancies that were followed up in the Department of Obstetric and Gynecology in Ege University during one year period and determined the preterm delivery ratio, discordance between fetuses and investigated the complications which occurred during pregnancy. Results: 148 twin, 24 triplet and 1 quadriplet pregnancies had been followed in a year. While 56 of twin pregnancies and 4 of the triplet pregnancies occurred spontaneously, others conceived with medical treatment or with assisted reproductive technology. Cerclage was performed in 11 pregnancies. Preeclampsia, gestational diabetes mellitus and cholestasis were observed in 12,26 and 8 patients respectively. Twin-to-twin transfusion syndrome was present in 4 patients and one patient had acardiac-acephalic twin pregnancy. Four patients had emergency cesarean section due to ablatio placenta. While 54 patients were hospitalized for one week to twelve weeks because of preterm labour 36 women had preterm premature rupture of the membranes. Only 38 patients had any problem during pregnancy. Discussion: Developments in assisted reproductive technology have been increasing the number of multiple gestations and their complications. The complications due to preterm labor, increased requirement of Neonatal Intensive Care Units and hospital payments are all burden on the families as well as on the social insurance companies.

Recombinant innovation and endogenous technological transitions

NARCIS (Netherlands)

Frenken, K.; Izquierdo, L.R.; Zeppini, P.

2012-01-01

We propose a model of technological transitions based on two different types of innovations. Branching innovations refer to technological improvements along a particular path, while recombinant innovations represent fusions of multiple paths. Recombinant innovations create "short-cuts" which reduce

48 CFR 652.239-70 - Information Technology Security Plan and Accreditation.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Information Technology... Clauses 652.239-70 Information Technology Security Plan and Accreditation. As prescribed in 639.107-70(a), insert the following provision: Information Technology Security Plan and Accreditation (SEP 2007) All...

48 CFR 1252.239-71 - Information technology security plan and accreditation.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Information technology... Provisions and Clauses 1252.239-71 Information technology security plan and accreditation. As prescribed in (TAR) 48 CFR 1239.70, insert the following provision: Information Technology Security Plan and...

32 CFR 147.15 - Guideline M-Misuse of Information technology systems.

Science.gov (United States)

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Guideline M-Misuse of Information technology... CLASSIFIED INFORMATION Adjudication § 147.15 Guideline M—Misuse of Information technology systems. (a) The... ability to properly protect classified systems, networks, and information. Information Technology Systems...

Prevalence and predictors of exposure to multiple metals in preschool children from Montevideo, Uruguay

International Nuclear Information System (INIS)

Kordas, Katarzyna; Queirolo, Elena I.; Ettinger, Adrienne S.; Wright, Robert O.; Stoltzfus, Rebecca J.

2010-01-01

The extent of children's exposure to multiple toxic metals is not well described in many developing countries. We examined metal exposures in young children (6-37 months) from Montevideo, Uruguay and their mothers (15-47 years) participating in a community-based study. Hair samples collected from 180 children and their mothers were analyzed for: lead (Pb), cadmium (Cd), manganese (Mn), and arsenic (As) concentration using inductively coupled plasma-mass spectrometry (ICP-MS). Median metal levels (μg/g) were: Pb 13.69, Mn 1.45, Cd 0.17, and As 0.09 for children and Pb 4.27, Mn 1.42, Cd 0.08, and As 0.02 for mothers. Of the child and maternal samples, 1.7% and 2.9% were below the limit of detection (LOD) for Cd, and 21.3% and 38.5% were below the LOD for As, respectively. Correlations between maternal and child levels ranged 0.38-0.55 (p < 0.01). Maternal hair metal levels were the strongest predictors of metal concentrations in children's hair. Girls had significantly lower As levels than boys (p < 0.01) but did not differ on other metals. In addition, in bivariate logistic regressions predicting the likelihood that the child would be exposed to multiple metals, hemoglobin < 10.5 g/dL (OR = 2.12, p < 0.05), blood lead (OR = 1.17, p < 0.01), and the mother being exposed to two or more metals (OR = 3.34, p < 0.01) were identified as significant predictors of increased likelihood of multiple metal exposure. Older child age (OR = 0.96, p < 0.05), higher maternal education (OR = 0.35, p < 0.01), and higher number of household possessions (OR = 0.83, p < 0.01) were significantly associated with decreased likelihood of multiple metal exposure. Preschool children in Uruguay are exposed to multiple metals at levels that in other studies have been associated with cognitive and behavioral deficits. Sources of exposure, as well as cognitive and behavioral consequences of multiple metal exposure, should be investigated in this population.

Prevalence and predictors of exposure to multiple metals in preschool children from Montevideo, Uruguay

Energy Technology Data Exchange (ETDEWEB)

Kordas, Katarzyna, E-mail: Kxk48@psu.edu [Department of Nutritional Sciences, Pennsylvania State University, 110 Chandlee Laboratory, University Park, PA 16802 (United States); Queirolo, Elena I. [Center for Research, Catholic University of Uruguay, Montevideo (Uruguay); Clinic for Environmental Contaminants, Pereira Rossell Hospital, Montevideo (Uruguay); Ettinger, Adrienne S.; Wright, Robert O. [Department of Environmental Health, Harvard School of Public Health, Boston, MA (United States); Stoltzfus, Rebecca J. [Division of Nutritional Sciences, Cornell University, Ithaca, NY (United States)

2010-09-15

The extent of children's exposure to multiple toxic metals is not well described in many developing countries. We examined metal exposures in young children (6-37 months) from Montevideo, Uruguay and their mothers (15-47 years) participating in a community-based study. Hair samples collected from 180 children and their mothers were analyzed for: lead (Pb), cadmium (Cd), manganese (Mn), and arsenic (As) concentration using inductively coupled plasma-mass spectrometry (ICP-MS). Median metal levels ({mu}g/g) were: Pb 13.69, Mn 1.45, Cd 0.17, and As 0.09 for children and Pb 4.27, Mn 1.42, Cd 0.08, and As 0.02 for mothers. Of the child and maternal samples, 1.7% and 2.9% were below the limit of detection (LOD) for Cd, and 21.3% and 38.5% were below the LOD for As, respectively. Correlations between maternal and child levels ranged 0.38-0.55 (p < 0.01). Maternal hair metal levels were the strongest predictors of metal concentrations in children's hair. Girls had significantly lower As levels than boys (p < 0.01) but did not differ on other metals. In addition, in bivariate logistic regressions predicting the likelihood that the child would be exposed to multiple metals, hemoglobin < 10.5 g/dL (OR = 2.12, p < 0.05), blood lead (OR = 1.17, p < 0.01), and the mother being exposed to two or more metals (OR = 3.34, p < 0.01) were identified as significant predictors of increased likelihood of multiple metal exposure. Older child age (OR = 0.96, p < 0.05), higher maternal education (OR = 0.35, p < 0.01), and higher number of household possessions (OR = 0.83, p < 0.01) were significantly associated with decreased likelihood of multiple metal exposure. Preschool children in Uruguay are exposed to multiple metals at levels that in other studies have been associated with cognitive and behavioral deficits. Sources of exposure, as well as cognitive and behavioral consequences of multiple metal exposure, should be investigated in this population.

Legal Aspects of Iatrogenic Multiple Pregnancy

Directory of Open Access Journals (Sweden)

Jacques Milliez

2009-01-01

Full Text Available During Assisted Reproductive Technology (ART procedures, the transfer of a single embryodramatically reduces the rate of multiple pregnancy. Proper information, therefore, should bedelivered to patients before embryo transfer. In many countries, regulations limit, according toage of the patient, the number of embryos to be transferred. Selective fetal reduction should not beconsidered as a suitable alternative to a single embryo transfer policy. The international federationof obstetricians and gynaecologists (FIGO recommendations on Multifetal reduction outline thatthe priority should be a careful planning and monitoring of infertility treatment for the reduction oravoidance of multiple pregnancy.

Digital Technology Entrepreneurship

DEFF Research Database (Denmark)

Giones, Ferran; Brem, Alexander

2017-01-01

Technology entrepreneurship is an established concept in academia. However, recent developments in the context of digital entrepreneurship call for revision and advance- ment. The multiple possible combinations of technology and entrepreneurship have res- ulted in a diversity of phenomena...... with significantly different characteristics and socio-economic impact. This article is focused on the identification and description of technology entrepreneurship in times of digitization. Based on current examples, we identify and describe characterizations of technology entrepreneurship, digital techno- logy...... entrepreneurship, and digital entrepreneurship. With this new delineation of terms, we would like to foster discussion between researchers, entrepreneurs, and policy makers on the impact of digitization on entrepreneurship, and set a future research agenda....

On sets of convergence and divergence of multiple orthogonal series

International Nuclear Information System (INIS)

D'yachenko, M I; Kazaryan, K S

2002-01-01

Multiple Fourier series with respect to uniformly bounded orthonormal systems (ONSs) are studied. The following results are obtained. Theorem 1. Let Φ={φ n (x)} n=1 ∞ be a complete orthonormal system on [0,1] that is uniformly bounded by M on this interval, assume that m≥2, and let Φ(m)={φ n (x)} nelement ofN m , where φ n (n)=φ n 1 (x 1 )...φ n m (x m ). Then there exists a function f(x) element of L([0,1] m ) cubically diverges on some measurable subset H of [0,1] m with μ m (H)≥1-(1-1/M 2 ) m . Theorem 3. For M>1 and an integer m≥2 let E be an arbitrary measurable subset of [0,1] such that μ(E)=1-1/M 2 . Then there exists a complete orthonormal system Φ on [0,1] uniformly bounded by M there such that the multiple Fourier series of each function f(x) element of L([0,1] m ) with respect to the product system Φ(m) cubically converges to f(x) a.e. on E m . Definitive results in this direction are established also for incomplete uniformly bounded ONSs

Influence of stellar multiplicity on planet formation. I. Evidence of suppressed planet formation due to stellar companions within 20 au and validation of four planets from the Kepler multiple planet candidates

International Nuclear Information System (INIS)

Wang, Ji; Fischer, Debra A.; Xie, Ji-Wei; Barclay, Thomas

2014-01-01

The planet occurrence rate for multiple stars is important in two aspects. First, almost half of stellar systems in the solar neighborhood are multiple systems. Second, the comparison of the planet occurrence rate for multiple stars to that for single stars sheds light on the influence of stellar multiplicity on planet formation and evolution. We developed a method of distinguishing planet occurrence rates for single and multiple stars. From a sample of 138 bright (K P < 13.5) Kepler multi-planet candidate systems, we compared the stellar multiplicity rate of these planet host stars to that of field stars. Using dynamical stability analyses and archival Doppler measurements, we find that the stellar multiplicity rate of planet host stars is significantly lower than field stars for semimajor axes less than 20 AU, suggesting that planet formation and evolution are suppressed by the presence of a close-in companion star at these separations. The influence of stellar multiplicity at larger separations is uncertain because of search incompleteness due to a limited Doppler observation time baseline and a lack of high-resolution imaging observation. We calculated the planet confidence for the sample of multi-planet candidates and find that the planet confidences for KOI 82.01, KOI 115.01, KOI 282.01, and KOI 1781.02 are higher than 99.7% and thus validate the planetary nature of these four planet candidates. This sample of bright Kepler multi-planet candidates with refined stellar and orbital parameters, planet confidence estimation, and nearby stellar companion identification offers a well-characterized sample for future theoretical and observational study.

47 CFR 1.735 - Copies; service; separate filings against multiple defendants.

Science.gov (United States)

2010-10-01

... overnight delivery service such as, or comparable to, the US Postal Service Express Mail, United Parcel... 47 Telecommunication 1 2010-10-01 2010-10-01 false Copies; service; separate filings against... Complaints § 1.735 Copies; service; separate filings against multiple defendants. (a) Complaints may...

Delegation control of multiple unmanned systems

Science.gov (United States)

Flaherty, Susan R.; Shively, Robert J.

2010-04-01

Maturing technologies and complex payloads coupled with a future objective to reduce the logistics burden of current unmanned aerial systems (UAS) operations require a change to the 2-crew employment paradigm. Increased automation and operator supervisory control of unmanned systems have been advocated to meet the objective of reducing the crew requirements, while managing future technologies. Specifically, a delegation control employment strategy has resulted in reduced workload and higher situation awareness for single operators controlling multiple unmanned systems in empirical studies1,2. Delegation control is characterized by the ability for an operator to call a single "play" that initiates prescribed default actions for each vehicle and associated sensor related to a common mission goal. Based upon the effectiveness of delegation control in simulation, the U.S. Army Aeroflightdynamics Directorate (AFDD) developed a Delegation Control (DelCon) operator interface with voice recognition implementation for play selection, real-time play modification, and play status with automation transparency to enable single operator control of multiple unmanned systems in flight. AFDD successfully demonstrated delegation control in a Troops-in-Contact mission scenario at Ft. Ord in 2009. This summary showcases the effort as a beneficial advance in single operator control of multiple UAS.

Reconfiguring Urban Sustainability Transitions, Analysing Multiplicity

Directory of Open Access Journals (Sweden)

Mike Hodson

2017-02-01

Full Text Available Cities, and the networked infrastructures that sustain urban life, are seen as crucial sites for creating more sustainable futures. Yet, although there are many plans, the realisation of sustainable urban infrastructures on the ground is uneven. To develop better ways of understanding why this is the case, the paper makes a conceptual contribution by engaging with current understanding of urban sustainability transitions, using urban sustainable mobility as a reference point. It extends these insights to argue that urban transitions are not about technological or social innovation per se, but about how multiple innovations are experimented with, combined and reconfigured in existing urban contexts and how such processes are governed. There are potentially many ways in which urban sustainable mobility can be reconfigured contextually. Innovation is in the particular form of reconfiguration rather than individual technologies. To make analytical sense of this multiplicity, a preliminary framework is developed that offers the potential to think about urban transitions as contextual and reconfigurational. We argue that there is a need to embrace multiplicity and to understand its relationships to forms of reconfiguration, through empirical exploration and further theoretical and conceptual development. The preliminary framework is a contribution to doing so and we set out future directions for research.

Technology, safety and costs of decommissioning nuclear reactors at multiple-reactor stations

International Nuclear Information System (INIS)

Wittenbrock, N.G.

1982-01-01

Safety and cost information is developed for the conceptual decommissioning of large (1175-MWe) pressurized water reactors (PWR) and large (1155-MWe) boiling water reactors (BWR) at multiple-reactor stations. Three decommissioning alternatives are studied: DECON (immediate decontamination), SAFSTOR (safe storage followed by deferred decontamination), and ENTOMB (entombment). Safety and costs of decommissioning are estimated by determining the impact of probable features of multiple-reactor-station operation that are considered to be unavailable at a single-reactor station, and applying these estimated impacts to the decommissioning costs and radiation doses estimated in previous PWR and BWR decommissioning studies. The multiple-reactor-station features analyzed are: the use of interim onsite nuclear waste storage with later removal to an offsite waste disposal facility, the use of permanent onsite nuclear waste disposal, the dedication of the site to nuclear power generation, and the provision of centralized services

A Timing-Driven Partitioning System for Multiple FPGAs

Directory of Open Access Journals (Sweden)

Kalapi Roy

1996-01-01

Full Text Available Field-programmable systems with multiple FPGAs on a PCB or an MCM are being used by system designers when a single FPGA is not sufficient. We address the problem of partitioning a large technology mapped FPGA circuit onto multiple FPGA devices of a specific target technology. The physical characteristics of the multiple FPGA system (MFS pose additional constraints to the circuit partitioning algorithms: the capacity of each FPGA, the timing constraints, the number of I/Os per FPGA, and the pre-designed interconnection patterns of each FPGA and the package. Existing partitioning techniques which minimize just the cut sizes of partitions fail to satisfy the above challenges. We therefore present a timing driven N-way partitioning algorithm based on simulated annealing for technology-mapped FPGA circuits. The signal path delays are estimated during partitioning using a timing model specific to a multiple FPGA architecture. The model combines all possible delay factors in a system with multiple FPGA chips of a target technology. Furthermore, we have incorporated a new dynamic net-weighting scheme to minimize the number of pin-outs for each chip. Finally, we have developed a graph-based global router for pin assignment which can handle the pre-routed connections of our MFS structure. In order to reduce the time spent in the simulated annealing phase of the partitioner, clusters of circuit components are identified by a new linear-time bottom-up clustering algorithm. The annealing-based N-way partitioner executes four times faster using the clusters as opposed to a flat netlist with improved partitioning results. For several industrial circuits, our approach outperforms the recursive min-cut bi-partitioning algorithm by 35% in terms of nets cut. Our approach also outperforms an industrial FPGA partitioner by 73% on average in terms of unroutable nets. Using the performance optimization capabilities in our approach we have successfully partitioned the

Charged track multiplicity in B meson decay

International Nuclear Information System (INIS)

Brandenburg, G.; Ershov, A.; Gao, Y. S.; Kim, D. Y.-J.; Wilson, R.; Browder, T. E.; Li, Y.; Rodriguez, J. L.; Yamamoto, H.; Bergfeld, T.

2000-01-01

We have used the CLEO II detector to study the multiplicity of charged particles in the decays of B mesons produced at the Υ(4S) resonance. Using a sample of 1.5x10 6 B meson pairs, we find the mean inclusive charged particle multiplicity to be 10.71±0.02 -0.15 +0.21 for the decay of the pair. This corresponds to a mean multiplicity of 5.36±0.01 -0.08 +0.11 for a single B meson. Using the same data sample, we have also extracted the mean multiplicities in semileptonic and nonleptonic decays. We measure a mean of 7.82±0.05 -0.19 +0.21 charged particles per BB(bar sign) decay when both mesons decay semileptonically. When neither B meson decays semileptonically, we measure a mean charged particle multiplicity of 11.62±0.04 -0.18 +0.24 per BB(bar sign) pair. (c) 2000 The American Physical Society

Millennial generation student nurses' perceptions of the impact of multiple technologies on learning.

Science.gov (United States)

Montenery, Susan M; Walker, Marjorie; Sorensen, Elizabeth; Thompson, Rhonda; Kirklin, Dena; White, Robin; Ross, Carl

2013-01-01

To determine how millennial nursing students perceive the effects of instructional technology on their attentiveness, knowledge, critical thinking, and satisfaction. BACKGROUND Millennial learners develop critical thinking through experimentation, active participation, and multitasking with rapid shifts between technological devices. They desire immediate feedback. METHOD; A descriptive, longitudinal, anonymous survey design was used with a convenience sample of 108 sophomore, junior, and senior baccalaureate nursing students (participation rates 95 percent, winter, 85 percent, spring). Audience response, virtual learning, simulation, and computerized testing technologies were used. An investigator-designed instrument measured attentiveness, knowledge, critical thinking, and satisfaction (Cronbach's alphas 0.73, winter; 0.84, spring). Participants positively rated the audience response, virtual learning, and simulation instructional technologies on their class participation, learning, attention, and satisfaction. They strongly preferred computerized testing. Consistent with other studies, these students engaged positively with new teaching strategies using contemporary instructional technology. Faculty should consider using instructional technologies.

10 CFR 603.875 - Foreign access to technology and U.S. competitiveness provisions.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Foreign access to technology and U.S. competitiveness... Foreign access to technology and U.S. competitiveness provisions. (a) Consistent with the objective of enhancing national security and United States competitiveness by increasing the public's reliance on the...

Mobile Web for Pervasive environments - design webexperiences for multiple mobile devices

DEFF Research Database (Denmark)

Hansen, Thomas Riisgaard

2008-01-01

In this paper we present an architecture for designing web pages that uses multiple mobile and stationary devices to present web content. The architecture extends standard web technology with a number of functions for expressing how web content might migrate and use multiple displays....... The architecture is developed to support desktop applications, but in this paper we describe how the architecture can be extended to mobile devices by using AJAX technology. The paper also presents an implementation and presents a number of applications for mobile devices developed with this framework....

47 CFR 2.924 - Marketing of electrically identical equipment having multiple trade names and models or type...

Science.gov (United States)

2010-10-01

... Authorizations § 2.924 Marketing of electrically identical equipment having multiple trade names and models or... 47 Telecommunication 1 2010-10-01 2010-10-01 false Marketing of electrically identical equipment having multiple trade names and models or type numbers under the same FCC Identifier. 2.924 Section 2.924...

Assessment of major nuclear technologies with decision and risk analysis

International Nuclear Information System (INIS)

Winterfeldt, D. von

1995-01-01

Selecting technologies for major nuclear programs involves several complexities, including multiple stakeholders, multiple conflicting objectives, uncertainties, and risk. In addition, the programmatic risks related to the schedule, cost, and performance of these technologies often become major issues in the selection process. This paper describes a decision analysis approach for addressing these complexities in a logical manner

The human in multiple, hybrid topologies

DEFF Research Database (Denmark)

Svabo, Connie

hybrid associations with a museum exhibition, fellow visitors and portable, mediating technologies such as exercise pamphlets, mobile phone cameras and animal costumes. Museum visitors couple up with various entities and participate in multiple enactments; they associate and dissociate, and thus......Based on ethnographic fieldwork at a modern Danish museum of natural history, and inspired by the philosophical work of Michel Serres and STS scholars Bruno Latour, John Law, Annemarie Mol and Mike Michael, this paper explores the shifting and morphing of museum visitors as they engage in multiple...... constitute shifting fluid and flickering human hybrid topologies. The ethnography of hybrid, morphing museum visitors is related to literature on the relations between people and places. Multiplicity-oriented and heterogeneous ways of conceptualizing the human subject are considered for their implications...

The United States Department of Energy Office of Industrial Technology`s Technology Benefits Recording System

Energy Technology Data Exchange (ETDEWEB)

Hughes, K.R.; Moore, N.L.

1994-09-01

The U.S. Department of Energy (DOE) Office of Industrial Technology`s (OIT`s) Technology Benefits Recording System (TBRS) was developed by Pacific Northwest Laboratory (PNL). The TBRS is used to organize and maintain records of the benefits accrued from the use of technologies developed with the assistance of OIT. OIT has had a sustained emphasis on technology deployment. While individual program managers have specific technology deployment goals for each of their ongoing programs, the Office has also established a separate Technology Deployment Division whose mission is to assist program managers and research and development partners commercialize technologies. As part of this effort, the Technology Deployment Division developed an energy-tracking task which has been performed by PNL since 1977. The goal of the energy-tracking task is to accurately assess the energy savings impact of OIT-developed technologies. In previous years, information on OIT-sponsored technologies existed in a variety of forms--first as a hardcopy, then electronically in several spreadsheet formats that existed in multiple software programs. The TBRS was created in 1993 for OIT and was based on information collected in all previous years from numerous industrial contacts, vendors, and plants that have installed OIT-sponsored technologies. The TBRS contains information on technologies commercialized between 1977 and the present, as well as information on emerging technologies in the late development/early commercialization stage of the technology life cycle. For each technology, details on the number of units sold and the energy saved are available on a year-by-year basis. Information regarding environmental benefits, productivity and competitiveness benefits, or impact that the technology may have had on employment is also available.

Experimental Conditions: SE3_S02_M01_D01 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available SE3_S02_M01_D01 SE3 Comparison of fruit metabolites among tomato varieties 1 SE3_S0...2 Solanum lycopersicum House Momotaro fruit SE3_S02_M01 6.7mg [MassBase ID] MDLC1_25529 SE3_MS1 LC-FT-ICR-MS

Walker devices and microswitch technology to enhance assisted indoor ambulation by persons with multiple disabilities: three single-case studies.

Science.gov (United States)

Lancioni, Giulio E; Singh, Nirbhay N; O'Reilly, Mark F; Sigafoos, Jeff; Oliva, Doretta; Campodonico, Francesca; Buono, Serafino

2013-07-01

These three single-case studies assessed the use of walker devices and microswitch technology for promoting ambulation behavior among persons with multiple disabilities. The walker devices were equipped with support and weight lifting features. The microswitch technology ensured that brief stimulation followed the participants' ambulation responses. The participants were two children (i.e., Study I and Study II) and one man (i.e., Study III) with poor ambulation performance. The ambulation efforts of the child in Study I involved regular steps, while those of the child in Study II involved pushing responses (i.e., he pushed himself forward with both feet while sitting on the walker's saddle). The man involved in Study III combined his poor ambulation performance with problem behavior, such as shouting or slapping his face. The results were positive for all three participants. The first two participants had a large increase in the number of steps/pushes performed during the ambulation events provided and in the percentages of those events that they completed independently. The third participant improved his ambulation performance as well as his general behavior (i.e., had a decline in problem behavior and an increase in indices of happiness). The wide-ranging implications of the results are discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Multiple myeloma of the jaw: A case report

Directory of Open Access Journals (Sweden)

Shubhasini A Raghavan

2014-01-01

Full Text Available Multiple myeloma is a systemic B-cell lymphoproliferative disease that causes osteolytic lesions in the vertebra, ribs, pelvic bone, skull and jaw. Rarely jaw lesions are seen as the first sign in multiple myeloma. This is a case report with follow up of a 57-year-old female patient, previously treated for osteoporosis, who presented with a swelling of the jaw. On radiographic examination, she was found to have osteolytic lesions in the mandible and skull bones. These conventional aids led to the diagnosis of multiple myeloma thereby proving that the osteoporotic lesions were a part of the spectrum of multiple myeloma. The patient underwent chemotherapy and is currently on follow-up. This case report emphasizes the importance of early diagnosis of multiple myeloma in the jaw using readily available technologies and illustrates the contribution that oral assessment can provide.

Cooperative Control of Multiple Unmanned Autonomous Vehicles

Science.gov (United States)

2005-06-03

I I Final Report 4. TITLE AND SUBTITLE 5. FUNDING NUMBERS Cooperative Control of Multiple Unmanned Autonomous Vehicles F49620-01-1-0337 6. AUTHOR(S... Autonomous Vehicles Final Report Kendall E. Nygard Department of Computer Science and Operations Research North Dakota State University Fargo, ND 58105-5164

A Multiple Sensor Machine Vision System Technology for the Hardwood

Science.gov (United States)

Richard W. Conners; D.Earl Kline; Philip A. Araman

1995-01-01

For the last few years the authors have been extolling the virtues of a multiple sensor approach to hardwood defect detection. Since 1989 the authors have actively been trying to develop such a system. This paper details some of the successes and failures that have been experienced to date. It also discusses what remains to be done and gives time lines for the...

Integrating technologies for scalable ecology and conservation

NARCIS (Netherlands)

Marvin, D.C.; Koh, L.P.; Lynam, A.J.; Wich, S.; Davies, A.B.; Krishnamurthy, R.; Stokes, E.; Starkey, R.; Asner, G.P.

Integration of multiple technologies greatly increases the spatial and temporal scales over which ecological patterns and processes can be studied, and threats to protected ecosystems can be identified and mitigated. A range of technology options relevant to ecologists and conservation practitioners

Using automatic item generation to create multiple-choice test items.

Science.gov (United States)

Gierl, Mark J; Lai, Hollis; Turner, Simon R

2012-08-01

Many tests of medical knowledge, from the undergraduate level to the level of certification and licensure, contain multiple-choice items. Although these are efficient in measuring examinees' knowledge and skills across diverse content areas, multiple-choice items are time-consuming and expensive to create. Changes in student assessment brought about by new forms of computer-based testing have created the demand for large numbers of multiple-choice items. Our current approaches to item development cannot meet this demand. We present a methodology for developing multiple-choice items based on automatic item generation (AIG) concepts and procedures. We describe a three-stage approach to AIG and we illustrate this approach by generating multiple-choice items for a medical licensure test in the content area of surgery. To generate multiple-choice items, our method requires a three-stage process. Firstly, a cognitive model is created by content specialists. Secondly, item models are developed using the content from the cognitive model. Thirdly, items are generated from the item models using computer software. Using this methodology, we generated 1248 multiple-choice items from one item model. Automatic item generation is a process that involves using models to generate items using computer technology. With our method, content specialists identify and structure the content for the test items, and computer technology systematically combines the content to generate new test items. By combining these outcomes, items can be generated automatically. © Blackwell Publishing Ltd 2012.

Study about the sensibility in vitro of different strains of Vibrio cholera 01 exposed to 60 Co gamma radiation; Estudo da sensibilidade in vitro de diferentes cepas de Vibio cholerae 01 a radiacao gama de 60Co

Energy Technology Data Exchange (ETDEWEB)

Moraes, Ivany Rodrigues de [Instituto Adolfo Lutz, Sao Paulo, SP (Brazil). Servicos de Saude; Gelli, Dilma Scala; Jakabi, Miyoko [Instituto Adolfo Lutz, Sao Paulo, SP (Brazil). Secao de Microbiologia; Mastro, Nelida Lucia del [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)]. E-mail: nlmastro@net.ipen.br

1998-07-01

The presence of some microorganisms in food, or the metabolites originated during their own multiplication may bring several diseases to humans: intoxications and food borne infections. Among the agents that may cause those diseases, we find Vibrio cholerae 01. In this experiment, the studies are focused on the radiosensibility in vitro of four strains of V. cholerae 01, exposed to different doses of ionizing radiation of {sup 60} Co. The results are compared with other data related to bacterial food borne diseases, including water. (author)

Information Integration Technology Demonstration (IITD)

National Research Council Canada - National Science Library

Loe, Richard

2001-01-01

The objectives of the Information Integration Technology Demonstration (IITD) were to investigate, design a software architecture and demonstrate a capability to display intelligence data from multiple disciplines...

WE-FG-201-01: Patient Centric Technologies for Diagnosis of Breast and Cervical Cancer

International Nuclear Information System (INIS)

Ramanujam, N.

2016-01-01

Many low- and middle-income countries lack the resources and services to manage cancer, from screening and diagnosis to radiation therapy planning, treatment and quality assurance. The challenges in upgrading or introducing the needed services are enormous, and include severe shortages in equipment and trained staff. In this symposium, we will describe examples of technology and scientific research that have the potential to impact all these areas. These include: (1) the development of high-quality/low-cost colposcopes for cervical cancer screening, (2) the application of automated radiotherapy treatment planning to reduce staffing shortages, (3) the development of a novel radiotherapy treatment unit, and (4) utilizing a cloud-based infrastructure to facilitate collaboration and QA. Learning Objectives: Understand some of the issues in cancer care in low- resource environments, including shortages in staff and equipment, and inadequate physical infrastructure for advanced radiotherapy. Understand the challenges in developing and deploying diagnostic and treatment devices and services for low-resource environments. Understand some of the emerging technological solutions for cancer management in LMICs. NCI; L. Court, NIH, Varian, Elekta; I. Feain, Ilana Feain is founder and CTO of Nano-X Pty Ltd

WE-FG-201-01: Patient Centric Technologies for Diagnosis of Breast and Cervical Cancer

Energy Technology Data Exchange (ETDEWEB)

Ramanujam, N. [Duke University (United States)

2016-06-15

Many low- and middle-income countries lack the resources and services to manage cancer, from screening and diagnosis to radiation therapy planning, treatment and quality assurance. The challenges in upgrading or introducing the needed services are enormous, and include severe shortages in equipment and trained staff. In this symposium, we will describe examples of technology and scientific research that have the potential to impact all these areas. These include: (1) the development of high-quality/low-cost colposcopes for cervical cancer screening, (2) the application of automated radiotherapy treatment planning to reduce staffing shortages, (3) the development of a novel radiotherapy treatment unit, and (4) utilizing a cloud-based infrastructure to facilitate collaboration and QA. Learning Objectives: Understand some of the issues in cancer care in low- resource environments, including shortages in staff and equipment, and inadequate physical infrastructure for advanced radiotherapy. Understand the challenges in developing and deploying diagnostic and treatment devices and services for low-resource environments. Understand some of the emerging technological solutions for cancer management in LMICs. NCI; L. Court, NIH, Varian, Elekta; I. Feain, Ilana Feain is founder and CTO of Nano-X Pty Ltd.

The Use of Technology by Nonformal Environmental Educators

Science.gov (United States)

Peffer, Tamara Elizabeth; Bodzin, Alec M.; Smith, Judith Duffield

2013-01-01

This study examined the use of instructional and learning technologies by nonformal environmental educators. A 40-question survey was developed to inquire about practitioner demographics, technology use in practice, and beliefs about technology. The survey consisted of multiple choice, open-ended questions, and a Likert-type scale component--the…

Multiple births associated with assisted human reproduction in Canada.

Science.gov (United States)

Cook, Jocelynn L; Geran, Leslie; Rotermann, Michelle

2011-06-01

Assisted human reproduction has been associated with increased rates of multiple births. Data suggest that twins and higher order multiple pregnancies are at risk for pre- and postnatal health complications that contribute to stress on both the family and the Canadian health care system. No published Canadian data estimate the contribution of assisted human reproduction to multiple birth rates. This study was designed to determine the contributions of age and assisted human reproduction to multiple birth rates in Canada. We performed analyses of existing Canadian databases, using a mathematical model from the Centers for Disease Control and Prevention. More specifically, data from the Canadian Vital Statistics: Births and Stillbirths database were combined with data from the Canadian Assisted Reproductive Technologies Register collected by the Canadian Fertility and Andrology Society. Datasets were standardized to age distributions of mothers in 1978. RESULTS suggest that in vitro fertilization, ovulation induction, and age each contribute more to the rates of triplets than to twins. As expected, the contribution of natural factors was higher to twins than to triplets. These are the first Canadian data analyzed to separate and measure the contributions of age and assisted reproductive technologies to multiple birth rates. Our findings are important for guiding physician and patient education and informing the development of treatment protocols that will result in lower-risk pregnancies and improved long-term health for women and their offspring.

MO-FG-207-01: Technological Advances and Challenges: Experience with the First Integrated Whole-Body PET/MRI

Energy Technology Data Exchange (ETDEWEB)

Laforest, R. [Washington University School of Medicine (United States)

2015-06-15

The use of integrated PET/MRI systems in clinical applications can best benefit from understanding their technological advances and limitations. The currently available clinical PET/MRI systems have their own characteristics. Thorough analyses of existing technical data and evaluation of necessary performance metrics for quality assurances could be conducted to optimize application-specific PET/MRI protocols. This Symposium will focus on technical advances and limitations of clinical PET/MRI systems, and how this exciting imaging modality can be utilized in applications that can benefit from both PET and MRI. Learning Objectives: To understand the technological advances of clinical PET/MRI systems To correctly identify clinical applications that can benefit from PET/MRI To understand ongoing work to further improve the current PET/MRI technology Floris Jansen is a GE Healthcare employee.

MO-FG-207-01: Technological Advances and Challenges: Experience with the First Integrated Whole-Body PET/MRI

International Nuclear Information System (INIS)

Laforest, R.

2015-01-01

The use of integrated PET/MRI systems in clinical applications can best benefit from understanding their technological advances and limitations. The currently available clinical PET/MRI systems have their own characteristics. Thorough analyses of existing technical data and evaluation of necessary performance metrics for quality assurances could be conducted to optimize application-specific PET/MRI protocols. This Symposium will focus on technical advances and limitations of clinical PET/MRI systems, and how this exciting imaging modality can be utilized in applications that can benefit from both PET and MRI. Learning Objectives: To understand the technological advances of clinical PET/MRI systems To correctly identify clinical applications that can benefit from PET/MRI To understand ongoing work to further improve the current PET/MRI technology Floris Jansen is a GE Healthcare employee

40 CFR 63.113 - Process vent provisions-reference control technology.

Science.gov (United States)

2010-07-01

... § 63.113 Process vent provisions—reference control technology. (a) The owner or operator of a Group 1... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Process vent provisions-reference control technology. 63.113 Section 63.113 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

40 CFR 63.1322 - Batch process vents-reference control technology.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 11 2010-07-01 2010-07-01 true Batch process vents-reference control technology. 63.1322 Section 63.1322 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Batch process vents—reference control technology. (a) Batch process vents. The owner or operator of a...

6 CFR 37.19 - Machine readable technology on the driver's license or identification card.

Science.gov (United States)

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Machine readable technology on the driver's..., Verification, and Card Issuance Requirements § 37.19 Machine readable technology on the driver's license or identification card. For the machine readable portion of the REAL ID driver's license or identification card...

Molecular epidemiological study of HIV-1 CRF01_AE transmission in Hong Kong.

Science.gov (United States)

Chen, J H K; Wong, K H; Li, P; Chan, K C; Lee, M P; Lam, H Y; Cheng, V C C; Yuen, K Y; Yam, W C

2009-08-15

The objective of this study was to investigate the transmission history of the HIV-1 CRF01_AE epidemics in Hong Kong between 1994 and 2007. A total of 465 HIV-1 CRF01_AE pol sequences were derived from an in-house or a commercial HIV-1 genotyping system. Phylogenies of CRF01_AE sequences were analyzed by the Bayesian coalescent method. CRF01_AE patient population included 363 males (78.1%) and 102 females (21.9%), whereas 65% (314 of 465) were local Chinese. Major transmission routes were heterosexual contact (63%), followed by intravenous drug use (IDU) (19%) and men having sex with men (MSM) (17%). From phylogenetic analysis, local CRF01_AE strains were from multiple origins with 3 separate transmission clusters identified. Cluster 1 consisted mainly of Chinese male IDUs and heterosexuals. Clusters 2 and 3 included mainly local Chinese MSM and non-Chinese Asian IDUs, respectively. Chinese reference isolates available from China (Fujian, Guangxi, or Liaoning) were clonally related to our transmission clusters, demonstrating the epidemiological linkage of CRF01_AE infections between Hong Kong and China. The 3 individual local transmission clusters were estimated to have initiated since late 1980s and late 1990s, causing subsequent epidemics in the early 2000s. This is the first comprehensive molecular epidemiological study of HIV-1 CRF01_AE in Hong Kong. It revealed that MSM contact is becoming a major route of local CRF01_AE transmission in Hong Kong. Epidemiological linkage of CRF01_AE between Hong Kong and China observed in this study indicates the importance of regular molecular epidemiological surveillance for the HIV-1 epidemic in our region.

34 CFR 403.1 - What is the State Vocational and Applied Technology Education Program?

Science.gov (United States)

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What is the State Vocational and Applied Technology... TECHNOLOGY EDUCATION PROGRAM General § 403.1 What is the State Vocational and Applied Technology Education Program? (a) Under the State Vocational and Applied Technology Education Program, the Secretary makes...

Cleaner technology diffusion: case studies, modeling and policy. Editorial

NARCIS (Netherlands)

Montalvo Corral, C.; Kemp, R.

2008-01-01

The development and application of cleaner technologies (environmental technologies) offer multiple benefits for the adopter: reduced emissions, less waste and cost savings from reduced resource use and savings on waste costs. The question here is: if cleaner technologies offer such great benefits

WE-FG-207A-01: Introduction to Dedicated Breast CT - Early Studies

International Nuclear Information System (INIS)

Vedantham, S.

2016-01-01

Mammography-based screening has been a valuable imaging tool for the early detection of non-palpable lesions and has contributed to significant reduction in breast cancer associated mortality. However, the breast imaging community recognizes that mammography is not ideal, and in particular is inferior for women with dense breasts. Also, the 2-D projection of a 3-D organ results in tissue superposition contributing to false-positives. The sensitivity of mammography is breast-density dependent. Its sensitivity, especially in dense breasts, is low due to overlapping tissue and the fact that normal breast tissue, benign lesions and breast cancers all have similar “densities”, making lesion detection more difficult. We ideally need 3-D imaging for imaging the 3-D breast. MRI is 3-D, whole breast ultrasound is 3-D, digital breast tomosynthesis is called 3-D but is really “pseudo 3-D” due to poor resolution along the depth-direction. Also, and importantly, we need to be able to administer intravenous contrast agents for optimal imaging, similar to other organ systems in the body. Dedicated breast CT allows for 3-D imaging of the uncompressed breast. In current designs, the patient is positioned prone on the table and the breast is pendant through an aperture and the scan takes approximately 10 seconds [O’Connell et al., AJR 195: 496–509, 2010]. Almost on the heels of the invention of CT itself, work began on the development of dedicated breast CT. These early breast CT systems were used in clinical trials and the results from comparative performance evaluation of breast CT and mammography for 1625 subjects were reported in 1980 [Chang et al., Cancer 46: 939–46, 1980]. However, the technological limitations at that time stymied clinical translation for decades. Subsequent to the landmark article in 2001 [Boone et al., Radiology 221: 657–67, 2001] that demonstrated the potential feasibility in terms of radiation dose, multiple research groups are actively

WE-FG-207A-01: Introduction to Dedicated Breast CT - Early Studies

Energy Technology Data Exchange (ETDEWEB)

Vedantham, S. [University of Massachusetts Medical School (United States)

2016-06-15

Mammography-based screening has been a valuable imaging tool for the early detection of non-palpable lesions and has contributed to significant reduction in breast cancer associated mortality. However, the breast imaging community recognizes that mammography is not ideal, and in particular is inferior for women with dense breasts. Also, the 2-D projection of a 3-D organ results in tissue superposition contributing to false-positives. The sensitivity of mammography is breast-density dependent. Its sensitivity, especially in dense breasts, is low due to overlapping tissue and the fact that normal breast tissue, benign lesions and breast cancers all have similar “densities”, making lesion detection more difficult. We ideally need 3-D imaging for imaging the 3-D breast. MRI is 3-D, whole breast ultrasound is 3-D, digital breast tomosynthesis is called 3-D but is really “pseudo 3-D” due to poor resolution along the depth-direction. Also, and importantly, we need to be able to administer intravenous contrast agents for optimal imaging, similar to other organ systems in the body. Dedicated breast CT allows for 3-D imaging of the uncompressed breast. In current designs, the patient is positioned prone on the table and the breast is pendant through an aperture and the scan takes approximately 10 seconds [O’Connell et al., AJR 195: 496–509, 2010]. Almost on the heels of the invention of CT itself, work began on the development of dedicated breast CT. These early breast CT systems were used in clinical trials and the results from comparative performance evaluation of breast CT and mammography for 1625 subjects were reported in 1980 [Chang et al., Cancer 46: 939–46, 1980]. However, the technological limitations at that time stymied clinical translation for decades. Subsequent to the landmark article in 2001 [Boone et al., Radiology 221: 657–67, 2001] that demonstrated the potential feasibility in terms of radiation dose, multiple research groups are actively

Brief multiple behavior interventions in a college student health care clinic.

Science.gov (United States)

Werch, Chudley E Chad; Bian, Hui; Moore, Michele J; Ames, Steve; DiClemente, Carlo C; Weiler, Robert M

2007-12-01

This study examined the effects of brief image-based interventions, including a multiple behavior health contract, a one-on-one tailored consultation, and a combined consultation plus contract intervention, for impacting multiple health behaviors of students in a university health clinic. A total of 155 college students attending a major southern university were recruited to participate in a study evaluating a health promotion program titled Project Fitness during the fall 2005 and spring 2006. Participants were randomly assigned to one of three treatments as they presented at the clinic: 1) a multiple behavior health contract, 2) a one-on-one tailored consultation, or 3) a combined consultation plus contract intervention. Baseline and 1-month post-intervention data were collected using computer-assisted questionnaires in a quiet office within the student health clinic. Omnibus repeated-measures analyses of variance were significant for drinking driving behaviors, F(2,136) = 4.43, p = .01, exercise behaviors, F(5,140) = 6.12, p = .00, nutrition habits, F(3,143) = 5.37, p = .00, sleep habits, F(2,144) = 5.03, p = .01, and health quality of life, F(5,140) = 3.09, p = .01, with improvements on each behavior across time. Analysis of group-by-time interaction effects showed an increase in the use of techniques to manage stress, F(2,144) = 5.48, p = .01, and the number of health behavior goals set in the last 30 days, F(2,143) = 5.35, p = .01, but only among adolescents receiving the consultation, or consultation plus contract. Effect sizes were consistently larger across health behaviors, and medium in size, when both consult and contract were used together. Brief interventions using a positive goal image of fitness, and addressing a number of health habits using a contract and consultation strategy alone, or in combination, have the potential to influence positive changes in multiple health behaviors of college students attending a university primary health care clinic.

34 CFR 34.20 - Amount to be withheld under multiple garnishment orders.

Science.gov (United States)

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Amount to be withheld under multiple garnishment orders. 34.20 Section 34.20 Education Office of the Secretary, Department of Education ADMINISTRATIVE WAGE... other Federal law requires a different priority, the employer must pay us the amount calculated under...

19 CFR 212.01 - Purpose.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Purpose. 212.01 Section 212.01 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE IMPLEMENTATION OF THE EQUAL ACCESS TO JUSTICE ACT General Provisions § 212.01 Purpose. (a) The Equal Access to...

21 CFR 1311.01 - Scope.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Scope. 1311.01 Section 1311.01 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE REQUIREMENTS FOR ELECTRONIC ORDERS AND PRESCRIPTIONS (Eff. 6.... For the convenience of the user, the revised text is set forth as follows: § 1311.01 Scope. This part...

Towards fraud-proof ID documents using multiple data hiding technologies and biometrics

Science.gov (United States)

Picard, Justin; Vielhauer, Claus; Thorwirth, Niels

2004-06-01

Identity documents, such as ID cards, passports, and driver's licenses, contain textual information, a portrait of the legitimate holder, and eventually some other biometric characteristics such as a fingerprint or handwritten signature. As prices for digital imaging technologies fall, making them more widely available, we have seen an exponential increase in the ease and the number of counterfeiters that can effectively forge documents. Today, with only limited knowledge of technology and a small amount of money, a counterfeiter can effortlessly replace a photo or modify identity information on a legitimate document to the extent that it is very diffcult to differentiate from the original. This paper proposes a virtually fraud-proof ID document based on a combination of three different data hiding technologies: digital watermarking, 2-D bar codes, and Copy Detection Pattern, plus additional biometric protection. As will be shown, that combination of data hiding technologies protects the document against any forgery, in principle without any requirement for other security features. To prevent a genuine document to be used by an illegitimate user,biometric information is also covertly stored in the ID document, to be used for identification at the detector.

42 CFR 495.338 - Health information technology implementation advance planning document requirements (HIT IAPD).

Science.gov (United States)

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Health information technology implementation... CERTIFICATION STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements Specific to the Medicaid Program § 495.338 Health information technology implementation advance planning document...

Improving combustion characteristics and NO(x) emissions of a down-fired 350 MW(e) utility boiler with multiple injection and multiple staging.

Science.gov (United States)

Kuang, Min; Li, Zhengqi; Xu, Shantian; Zhu, Qunyi

2011-04-15

Within a Mitsui Babcock Energy Limited down-fired pulverized-coal 350 MW(e) utility boiler, in situ experiments were performed, with measurements taken of gas temperatures in the burner and near the right-wall regions, and of gas concentrations (O(2) and NO) from the near-wall region. Large combustion differences between zones near the front and rear walls and particularly high NO(x) emissions were found in the boiler. With focus on minimizing these problems, a new technology based on multiple-injection and multiple-staging has been developed. Combustion improvements and NO(x) reductions were validated by investigating three aspects. First, numerical simulations of the pulverized-coal combustion process and NO(x) emissions were compared in both the original and new technologies. Good agreement was found between simulations and in situ measurements with the original technology. Second, with the new technology, gas temperature and concentration distributions were found to be symmetric near the front and rear walls. A relatively low-temperature and high-oxygen-concentration zone formed in the near-wall region that helps mitigate slagging in the lower furnace. Third, NO(x) emissions were found to have decreased by as much as 50%, yielding a slight decrease in the levels of unburnt carbon in the fly ash.

Electric Aircraft Systems Technology Development

Data.gov (United States)

National Aeronautics and Space Administration — This project looks at multiple manned/unmanned full-scale/sub-scale flying research prototypes that will lead to the integration of electric propulsion technology on...

Free-space optical code-division multiple-access system design

Science.gov (United States)

Jeromin, Lori L.; Kaufmann, John E.; Bucher, Edward A.

1993-08-01

This paper describes an optical direct-detection multiple access communications system for free-space satellite networks utilizing code-division multiple-access (CDMA) and forward error correction (FEC) coding. System performance is characterized by how many simultaneous users operating at data rate R can be accommodated in a signaling bandwidth W. The performance of two CDMA schemes, optical orthogonal codes (OOC) with FEC and orthogonal convolutional codes (OCC), is calculated and compared to information-theoretic capacity bounds. The calculations include the effects of background and detector noise as well as nonzero transmitter extinction ratio and power imbalance among users. A system design for 10 kbps multiple-access communications between low-earth orbit satellites is given. With near- term receiver technology and representative system losses, a 15 W peak-power transmitter provides 10-6 BER performance with seven interfering users and full moon background in the receiver FOV. The receiver employs an array of discrete wide-area avalanche photodiodes (APD) for wide field of view coverage. Issues of user acquisition and synchronization, implementation technology, and system scalability are also discussed.

Prevalence of multiple birth in Isfahan, Iran

Directory of Open Access Journals (Sweden)

Ahmad Yazdekhasti

2018-01-01

Full Text Available Background: According to increasing rate of using assisted reproductive technology (ART which result in higher rates of multiple birth and natal difficulties, we aimed to determine the prevalence rate of multiple birth pregnancies. Materials and Methods: A descriptive cross-sectional study evaluating birth files in 2009–2010 of main hospitals of Isfahan, Iran. Results: Among 31640 files' studies, 614 cases of multiple birth pregnancies were investigated. The product of these pregnancies were 1286 (50.2% females infants including 557 twins (17.6/1000, 56 triplets (1.8/1000, and one case of quadruple (0.03/1000. Infants weigh <2500 g were 84.9% of all. Mothers had a mean age of 27.9 ± 4.9 which 30.4% of them had a positive history of using ART. Conclusion: The prevalence of multiple birth pregnancies is growing. The need for more mother and child care is important. Using ART world wide is leading more multiple birth which could be a cause for more complicated pregnancies.

Technology and the diffusion of renewable energy

International Nuclear Information System (INIS)

Popp, David; Hascic, Ivan; Medhi, Neelakshi

2011-01-01

We consider investment in wind, solar photovoltaic, geothermal, and electricity from biomass and waste across 26 OECD countries from 1991 to 2004. Using the PATSTAT database, we obtain a comprehensive list of patents for each of these technologies throughout the world, which we use to assess the impact of technological change on investment in renewable energy capacity. We consider four alternative methods for counting patents, using two possible filters: weighting patents by patent family size and including only patent applications filed in multiple countries. For each patent count, we create knowledge stocks representing the global technological frontier. We find that technological advances do lead to greater investment, but the effect is small. Investments in other carbon-free energy sources, such as hydropower and nuclear power, serve as substitutes for renewable energy. Comparing the effectiveness of our four patent counts, we find that both using only patents filed in multiple countries and weighting by family size improve the fit of the model.

Soil treatment technologies combined

International Nuclear Information System (INIS)

Davis, K.J.; Russell, D.J.

1993-01-01

The Superfund Amendments and Reauthorization Act (SARA) presents a legislative mandate to select effective and long-term remediation options. SARA has spurred the development of innovative technologies and other remedial alternatives that can be applied to the diverse contaminated media at hazardous waste sites. Even though many treatment technologies have been investigated for use at hazardous waste sites, only a few have been used successfully. Soil vapor extraction and soil composting have achieved cleanup goals at sites with soils contaminated with solvents, aromatic hydrocarbons and petroleum derivatives. With the increased use of innovative on-site technologies, the integration of multiple technologies to remediate sites with complex contaminants becomes a viable and cost-effective remedial alternative. Soil vapor extraction and composting have been applied successfully as individual technologies at hazardous waste sites. An integration of these two technologies also has been used to remediate a complex contaminated site

42 CFR 495.336 - Health information technology planning advance planning document requirements (HIT PAPD).

Science.gov (United States)

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Health information technology planning advance... STANDARDS FOR THE ELECTRONIC HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements Specific to the Medicaid Program § 495.336 Health information technology planning advance planning document requirements...

Branching innovation, recombinant innovation, and endogenous technological transitions

NARCIS (Netherlands)

Frenken, K.; Izquierdo, L.; Zeppini, P.

2012-01-01

We propose a model of technological transitions based on two different types of innovations. Branching innovations refer to technological improvements along a particular path, while recombinant innovations represent fusions of multiple paths. Recombinant innovations create "short-cuts" which reduce

Multiple Ships and Multiple Media: A Flexible Telepresence Program

Science.gov (United States)

Pelz, M.; Hoeberechts, M.; Riddell, D. J.; Ewing, N.

2016-02-01

Ocean Networks Canada (ONC) uses a number of research and exploration vessels equipped with remotely operated vehicles (ROVs) to maintain the NEPTUNE and VENUS cabled ocean observatories off the west coast of British Columbia, Canada. Maintenance expeditions range from several days to multiple weeks and encompass a range of activities including deploying new instruments, laying cable, recovering platforms, scientific sampling and conducting multibeam and visual surveys. In order to engage the widest possible participation in at-sea work, ONC uses telepresence technology to communicate from ship to shore and back with scientists, students, teachers and online viewers. In this presentation, we explore the challenge of designing a sustainable and flexible telepresence program which can be supported across multiple ship and ROV platforms, sometimes simultaneously. To meet outreach and education objectives, onboard educators conduct presentations to K-12 and post-secondary classrooms, museums and science centres on a daily basis. Online commentary by the educators, dive chief and ROV pilots accompanies the ROV dive footage and is streamed online 24/7 during underwater operations. Sharing the sights and sounds of the expeditions with students and educators ashore, including those in remote and inland communities, creates a unique learning environment for both formal and informal education audiences. As space is always a limiting factor on expeditions, the use of telepresence and other communication media enables ONC to simultaneously achieve engineering and science priorities at sea while communicating the successes and challenges of the expedition back to shore. Scientists and engineers provide guidance for operations from shore using a variety of communication technologies. We give examples from Ocean Networks Canada's most recent expedition, Fall 2015, which involved co-ordinated operations with three vessels - the R/V Thompson, the E/V Nautilus and the C/S Wave

Hospital costs of multiple-birth and singleton-birth children during the first 5 years of life and the role of assisted reproductive technology.

Science.gov (United States)

Chambers, Georgina M; Hoang, Van Phuong; Lee, Evelyn; Hansen, Michele; Sullivan, Elizabeth A; Bower, Carol; Chapman, Michael

2014-11-01

The unprecedented increase in multiple births during the past 3 decades is a major public health concern and parallels the uptake of medically assisted conception. The economic implications of such births are not well understood. To conduct a comprehensive economic and health services assessment of the frequency, duration, and cost of hospital admissions during the first 5 years of life for singleton, twin, and higher-order multiple (HOM) children and to examine the contribution of assisted reproductive technology (ART) to the incidence and cost of multiple births. A retrospective population cohort study using individually linked birth, hospital, and death records among 233,850 infants born in Western Australia between October 1993 and September 2003, and followed up to September 2008. Multiple-gestation delivery and ART conception. Odds of stillbirth, prematurity and low birth weight, frequency and length of hospital admissions, the mean costs by plurality, and the independent effect of prematurity on childhood costs. Of 226,624 singleton, 6941 twin, and 285 HOM infants, 1.0% of singletons, 15.4% of twins, and 34.7% of HOM children were conceived following ART. Compared with singletons, twins and HOMs were 3.4 and 9.6 times, respectively, more likely to be stillborn and were 6.4 and 36.7 times, respectively, more likely to die during the neonatal period. Twins and HOMs were 18.7 and 525.1 times, respectively, more likely to be preterm, and 3.6 and 2.8 times, respectively, more likely to be small for gestational age. The mean hospital costs of a singleton, twin, and HOM child to age 5 years were $2730, $8993, and $24,411 (in 2009-2010 US dollars), respectively, with cost differences concentrated in the neonatal period and during the first year of life. Almost 15% of inpatient costs for multiple births could have been avoided if ART twins and HOMs had been born as singletons. Compared with singletons, multiple-birth infants consume significantly more hospital

15 CFR 740.13 - Technology and software-unrestricted (TSU).

Science.gov (United States)

2010-01-01

... time the Internet location is changed, but you are not required to notify them of updates or... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Technology and software-unrestricted (TSU). 740.13 Section 740.13 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign...

Automatic plankton image classification combining multiple view features via multiple kernel learning.

Science.gov (United States)

Zheng, Haiyong; Wang, Ruchen; Yu, Zhibin; Wang, Nan; Gu, Zhaorui; Zheng, Bing

2017-12-28

Plankton, including phytoplankton and zooplankton, are the main source of food for organisms in the ocean and form the base of marine food chain. As the fundamental components of marine ecosystems, plankton is very sensitive to environment changes, and the study of plankton abundance and distribution is crucial, in order to understand environment changes and protect marine ecosystems. This study was carried out to develop an extensive applicable plankton classification system with high accuracy for the increasing number of various imaging devices. Literature shows that most plankton image classification systems were limited to only one specific imaging device and a relatively narrow taxonomic scope. The real practical system for automatic plankton classification is even non-existent and this study is partly to fill this gap. Inspired by the analysis of literature and development of technology, we focused on the requirements of practical application and proposed an automatic system for plankton image classification combining multiple view features via multiple kernel learning (MKL). For one thing, in order to describe the biomorphic characteristics of plankton more completely and comprehensively, we combined general features with robust features, especially by adding features like Inner-Distance Shape Context for morphological representation. For another, we divided all the features into different types from multiple views and feed them to multiple classifiers instead of only one by combining different kernel matrices computed from different types of features optimally via multiple kernel learning. Moreover, we also applied feature selection method to choose the optimal feature subsets from redundant features for satisfying different datasets from different imaging devices. We implemented our proposed classification system on three different datasets across more than 20 categories from phytoplankton to zooplankton. The experimental results validated that our system

22 CFR 231.01 - Purpose.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Purpose. 231.01 Section 231.01 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ARAB REPUBLIC OF EGYPT LOAN GUARANTEES ISSUED UNDER THE EMERGENCY WARTIME SUPPLEMENTAL APPROPRIATIONS ACT OF 2003, PUBLIC LAW 108-11-STANDARD TERMS AND CONDITIONS...

Scenario-informed multiple criteria analysis for prioritizing investments in electricity capacity expansion

International Nuclear Information System (INIS)

Martinez, Lauro J.; Lambert, James H.; Karvetski, Christopher W.

2011-01-01

Planning the expansion and energy security of electricity capacity for a national electricity utility is a complex task in almost any economy. Planning is usually an iterative activity and can involve the use of large scale planning optimization systems accompanied by assessment of uncertain scenarios emerging from economic, technological, environmental, and regulatory developments. This paper applies a multiple criteria decision analysis to prioritize investment portfolios in capacity expansion and energy security while principally studying the robustness of the prioritization to multiple uncertain and emergent scenarios. The scenarios are identified through interaction with decision makers and stakeholders. The approach finds which scenarios most affect the prioritization of the portfolios and which portfolios have the greatest upside and downside potential across scenarios. The approach fosters innovation in the use of robust and efficient technologies, renewable energy sources, and cleaner energy fuels. A demonstration is provided for assessing the performance of technology portfolios constructed from investments in nine electricity generation technologies in Mexico.

48 CFR 1804.470 - Security requirements for unclassified information technology (IT) resources.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Security requirements for unclassified information technology (IT) resources. 1804.470 Section 1804.470 Federal Acquisition Regulations... Classified Information Within Industry 1804.470 Security requirements for unclassified information technology...

Hausdorff dimension of the multiplicative golden mean shift

OpenAIRE

Kenyon, Richard; Peres, Yuval; Solomyak, Boris

2011-01-01

We compute the Hausdorff dimension of the "multiplicative golden mean shift" defined as the set of all reals in $[0,1]$ whose binary expansion $(x_k)$ satisfies $x_k x_{2k}=0$ for all $k\\ge 1$, and show that it is smaller than the Minkowski dimension.

Emissions Performance and In-Use Durability of Retrofit After-Treatment Technologies (SAE Paper 2014-01-2347)

Science.gov (United States)

In-use testing of diesel emissoin control technologies is an integral component of EPA's verification program. EPA identified and recovered a variety of retrofit devices, installed on heavy-duty vehicles for test.

Parallel point-multiplication architecture using combined group operations for high-speed cryptographic applications.

Directory of Open Access Journals (Sweden)

Md Selim Hossain

Full Text Available In this paper, we propose a novel parallel architecture for fast hardware implementation of elliptic curve point multiplication (ECPM, which is the key operation of an elliptic curve cryptography processor. The point multiplication over binary fields is synthesized on both FPGA and ASIC technology by designing fast elliptic curve group operations in Jacobian projective coordinates. A novel combined point doubling and point addition (PDPA architecture is proposed for group operations to achieve high speed and low hardware requirements for ECPM. It has been implemented over the binary field which is recommended by the National Institute of Standards and Technology (NIST. The proposed ECPM supports two Koblitz and random curves for the key sizes 233 and 163 bits. For group operations, a finite-field arithmetic operation, e.g. multiplication, is designed on a polynomial basis. The delay of a 233-bit point multiplication is only 3.05 and 3.56 μs, in a Xilinx Virtex-7 FPGA, for Koblitz and random curves, respectively, and 0.81 μs in an ASIC 65-nm technology, which are the fastest hardware implementation results reported in the literature to date. In addition, a 163-bit point multiplication is also implemented in FPGA and ASIC for fair comparison which takes around 0.33 and 0.46 μs, respectively. The area-time product of the proposed point multiplication is very low compared to similar designs. The performance ([Formula: see text] and Area × Time × Energy (ATE product of the proposed design are far better than the most significant studies found in the literature.

Concept-guided development of technology in ‘traditional’ and ‘innovative’ schools: quantitative and qualitative differences in technology integration

NARCIS (Netherlands)

de Koster, S.; Volman, M.; Kuiper, E.

2017-01-01

The integration of technology into the classroom remains a challenge for those involved. A concept-guided approach to the development of technology has been suggested as a way of meeting this challenge. This multiple case study was performed in the context of a project in which five elementary

40 CFR 191.01 - Applicability.

Science.gov (United States)

2010-07-01

... wastes at any facility regulated by the Nuclear Regulatory Commission or by Agreement States, to the... storage of spent nuclear fuel or high-level or transuranic wastes at any disposal facility that is... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Applicability. 191.01 Section 191.01...

Review of Key Technologies of 5G Wireless Communication System

Directory of Open Access Journals (Sweden)

Shi Sha

2015-01-01

Full Text Available The 5th generation mobile communication system (5G is oriented towards a new generation of mobile communication system to the year of 2020 and beyond, and its development is still at the exploratory stage. Combining the latest trends in mobile communication development at home and abroad, in this article, we describe the key technologies of driving the 5G research direction. Furthermore, the technical innovation of 5G comes from both wireless and network technologies. In the field of wireless technologies, massive multiple-input multiple-output (MIMO, ultra-wideband spectral, ultra-dense heterogeneous networks, have already become the focus of global industry. In the field of network technologies, a new network architecture based on software-defined networking (SDN becomes the prevailing view worldwide. Additionally, there are some other potential technologies for 5G, such as NOMA, FBMC, mm Waves, and Multi-carrier technology aggregation.

Integrating technologies for scalable ecology and conservation

OpenAIRE

David C. Marvin; Lian Pin Koh; Antony J. Lynam; Serge Wich; Andrew B. Davies; Ramesh Krishnamurthy; Emma Stokes; Ruth Starkey; Gregory P. Asner

2016-01-01

Integration of multiple technologies greatly increases the spatial and temporal scales over which ecological patterns and processes can be studied, and threats to protected ecosystems can be identified and mitigated. A range of technology options relevant to ecologists and conservation practitioners are described, including ways they can be linked to increase the dimensionality of data collection efforts. Remote sensing, ground-based, and data fusion technologies are broadly discussed in the ...

Is technology enough? developing archival information systems in ...

African Journals Online (AJOL)

In the archival community, the development of archival systems capable of documenting and managing multiple recordkeeping perspectives is an emerging topic of discussion. Developments in information and communication technologies seem to be leading to such possibilities becoming realities. But is technology ...

45 CFR 170.210 - Standards for health information technology to protect electronic health information created...

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Standards for health information technology to... Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION... FOR HEALTH INFORMATION TECHNOLOGY Standards and Implementation Specifications for Health Information...

Hyperdatabase: A schema for browsing multiple databases

Energy Technology Data Exchange (ETDEWEB)

Shepherd, M A [Dalhousie Univ., Halifax (Canada). Computer Science Div.; Watters, C R [Waterloo Univ., Waterloo (Canada). Computer Science Dept.

1990-05-01

In order to insure effective information retrieval, a user may need to search multiple databases on multiple systems. Although front end systems have been developed to assist the user in accessing different systems, they access one retrieval system at a time and the search has to be repeated for each required database on each retrieval system. More importantly, the user interacts with the results as independent sessions. This paper models multiple bibliographic databases distributed over one or more retrieval systems as a hyperdatabase, i.e., a single virtual database. The hyperdatabase is viewed as a hypergraph in which each node represents a bibliographic item and the links among nodes represent relations among the items. In the response to a query, bibliographic items are extracted from the hyperdatabase and linked together to form a transient hypergraph. This hypergraph is transient in the sense that it is ``created`` in response to a query and only ``exists`` for the duration of the query session. A hypertext interface permits the user to browse the transient hypergraph in a nonlinear manner. The technology to implement a system based on this model is available now, consisting of powerful workstation, distributed processing, high-speed communications, and CD-ROMs. As the technology advances and costs decrease such systems should be generally available. (author). 13 refs, 5 figs.

Hyperdatabase: A schema for browsing multiple databases

International Nuclear Information System (INIS)

Shepherd, M.A.; Watters, C.R.

1990-05-01

In order to insure effective information retrieval, a user may need to search multiple databases on multiple systems. Although front end systems have been developed to assist the user in accessing different systems, they access one retrieval system at a time and the search has to be repeated for each required database on each retrieval system. More importantly, the user interacts with the results as independent sessions. This paper models multiple bibliographic databases distributed over one or more retrieval systems as a hyperdatabase, i.e., a single virtual database. The hyperdatabase is viewed as a hypergraph in which each node represents a bibliographic item and the links among nodes represent relations among the items. In the response to a query, bibliographic items are extracted from the hyperdatabase and linked together to form a transient hypergraph. This hypergraph is transient in the sense that it is ''created'' in response to a query and only ''exists'' for the duration of the query session. A hypertext interface permits the user to browse the transient hypergraph in a nonlinear manner. The technology to implement a system based on this model is available now, consisting of powerful workstation, distributed processing, high-speed communications, and CD-ROMs. As the technology advances and costs decrease such systems should be generally available. (author). 13 refs, 5 figs

In vitro propagation of Stevia rebaudina plants using multiple shoot culture.

Science.gov (United States)

Nepovím, A; Vanek, T

1998-12-01

A multiple shoot culture was induced from nodal segments on MS medium containing half concentration of macroelements, 1% sucrose, and supplemented with NAA (0.01 mg/l). A bioreactor with hormone-free MS medium (300 ml) was inoculated with 1.5 g of the multiple shoot culture and cultivated for a month. The cultivating process of the multiple shoot culture in the bioreactor and the transfer into ex vitro conditions took about 8-9 weeks and produced approx. 600 new seedlings, that could be transferred from greenhouse to field conditions.

Sensing Strategies for Disambiguating among Multiple Objects in Known Poses.

Science.gov (United States)

1985-08-01

ELEMENT. PROIECT. TASK Artificial Inteligence Laboratory AE OKUI UBR 545 Technology Square Cambridge, MA 021.39 11. CONTROLLING OFFICE NAME AND ADDRESS 12...AD-Ali65 912 SENSING STRATEGIES FOR DISAMBIGURTING MONG MULTIPLE 1/1 OBJECTS IN KNOWN POSES(U) MASSACHUSETTS INST OF TECH CAMBRIDGE ARTIFICIAL ...or Dist Special 1 ’ MASSACHUSETTS INSTITUTE OF TECHNOLOGY ARTIFICIAL INTELLIGENCE LABORATORY A. I. Memo 855 August, 1985 Sensing Strategies for

NASA Technology Demonstrations Missions Program Overview

Science.gov (United States)

Turner, Susan

2011-01-01

The National Aeronautics and Space Administration (NASA) Fiscal Year 2010 (FY10) budget introduced a new strategic plan that placed renewed emphasis on advanced missions beyond Earth orbit. This supports NASA s 2011 strategic goal to create innovative new space technologies for our exploration, science, and economic future. As a result of this focus on undertaking many and more complex missions, NASA placed its attention on a greater investment in technology development, and this shift resulted in the establishment of the Technology Demonstrations Missions (TDM) Program. The TDM Program, within the newly formed NASA Office of the Chief Technologist, supports NASA s grand challenges by providing a steady cadence of advanced space technology demonstrations (Figure 1), allowing the infusion of flexible path capabilities for future exploration. The TDM Program's goal is to mature crosscutting capabilities to flight readiness in support of multiple future space missions, including flight test projects where demonstration is needed before the capability can transition to direct mission The TDM Program has several unique criteria that set it apart from other NASA program offices. For instance, the TDM Office matures a small number of technologies that are of benefit to multiple customers to flight technology readiness level (TRL) 6 through relevant environment testing on a 3-year development schedule. These technologies must be crosscutting, which is defined as technology with potential to benefit multiple mission directorates, other government agencies, or the aerospace industry, and they must capture significant public interest and awareness. These projects will rely heavily on industry partner collaboration, and funding is capped for all elements of the flight test demonstration including planning, hardware development, software development, launch costs, ground operations, and post-test assessments. In order to inspire collaboration across government and industry

Mobile Technology Use by People Experiencing Multiple Sclerosis Fatigue: Survey Methodology.

Science.gov (United States)

Van Kessel, Kirsten; Babbage, Duncan R; Reay, Nicholas; Miner-Williams, Warren M; Kersten, Paula

2017-02-28

Fatigue is one of the most commonly reported symptoms of multiple sclerosis (MS). It has a profound impact on all spheres of life, for people with MS and their relatives. It is one of the key precipitants of early retirement. Individual, group, and Internet cognitive behavioral therapy-based approaches to supporting people with MS to manage their fatigue have been shown to be effective. The aim of this project was to (1) survey the types of mobile devices and level of Internet access people with MS use or would consider using for a health intervention and (2) characterize the levels of fatigue severity and their impact experienced by the people in our sample to provide an estimate of fatigue severity of people with MS in New Zealand. The ultimate goal of this work was to support the future development of a mobile intervention for the management of fatigue for people with MS. Survey methodology using an online questionnaire was used to assess people with MS. A total of 51 people with MS participated. The average age was 48.5 years, and the large majority of the sample (77%) was female. Participants reported significant levels of fatigue as measured with the summary score of the Neurological Fatigue Index (mean 31.4 [SD 5.3]). Most (84%) respondents scored on average more than 3 on the fatigue severity questions, reflecting significant fatigue. Mobile phone usage was high with 86% of respondents reporting having a mobile phone; apps were used by 75% of respondents. Most participants (92%) accessed the Internet from home. New Zealand respondents with MS experienced high levels of both fatigue severity and fatigue impact. The majority of participants have a mobile device and access to the Internet. These findings, along with limited access to face-to-face cognitive behavioral therapy-based interventions, create an opportunity to develop a mobile technology platform for delivering a cognitive behavioral therapy-based intervention to decrease the severity and impact of

In Vitro Fertilization and Multiple Pregnancies

Science.gov (United States)

2006-01-01

Executive Summary Objective The objective of this health technology policy assessment was to determine the clinical effectiveness and cost-effectiveness of IVF for infertility treatment, as well as the role of IVF in reducing the rate of multiple pregnancies. Clinical Need: Target Population and Condition Typically defined as a failure to conceive after a year of regular unprotected intercourse, infertility affects 8% to 16% of reproductive age couples. The condition can be caused by disruptions at various steps of the reproductive process. Major causes of infertility include abnormalities of sperm, tubal obstruction, endometriosis, ovulatory disorder, and idiopathic infertility. Depending on the cause and patient characteristics, management options range from pharmacologic treatment to more advanced techniques referred to as assisted reproductive technologies (ART). ART include IVF and IVF-related procedures such as intra-cytoplasmic sperm injection (ICSI) and, according to some definitions, intra-uterine insemination (IUI), also known as artificial insemination. Almost invariably, an initial step in ART is controlled ovarian stimulation (COS), which leads to a significantly higher rate of multiple pregnancies after ART compared with that following natural conception. Multiple pregnancies are associated with a broad range of negative consequences for both mother and fetuses. Maternal complications include increased risk of pregnancy-induced hypertension, pre-eclampsia, polyhydramnios, gestational diabetes, fetal malpresentation requiring Caesarean section, postpartum haemorrhage, and postpartum depression. Babies from multiple pregnancies are at a significantly higher risk of early death, prematurity, and low birth weight, as well as mental and physical disabilities related to prematurity. Increased maternal and fetal morbidity leads to higher perinatal and neonatal costs of multiple pregnancies, as well as subsequent lifelong costs due to disabilities and an

Energy management under policy and technology uncertainty

International Nuclear Information System (INIS)

Tylock, Steven M.; Seager, Thomas P.; Snell, Jeff; Bennett, Erin R.; Sweet, Don

2012-01-01

Energy managers in public agencies are subject to multiple and sometimes conflicting policy objectives regarding cost, environmental, and security concerns associated with alternative energy technologies. Making infrastructure investment decisions requires balancing different distributions of risks and benefits that are far from clear. For example, managers at permanent Army installations must incorporate Congressional legislative objectives, executive orders, Department of Defense directives, state laws and regulations, local restrictions, and multiple stakeholder concerns when undertaking new energy initiatives. Moreover, uncertainty with regard to alternative energy technologies is typically much greater than that associated with traditional technologies, both because the technologies themselves are continuously evolving and because the intermittent nature of many renewable technologies makes a certain level of uncertainty irreducible. This paper describes a novel stochastic multi-attribute analytic approach that allows users to explore different priorities or weighting schemes in combination with uncertainties related to technology performance. To illustrate the utility of this approach for understanding conflicting policy or stakeholder perspectives, prioritizing the need for more information, and making investment decisions, we apply this approach to an energy technology decision problem representative of a permanent military base. Highlights: ► Incorporate disparate criteria with uncertain performance. ► Analyze decisions with contrasting stakeholder positions. ► Interactively compare alternatives based on uncertain weighting. ► User friendly multi-criteria decision analysis (MCDA) tool.

The gravitational wave detector NAUTILUS operating at T = 0.1 K

International Nuclear Information System (INIS)

Astone, P.; Bassan, M.; Bonifazi, P.

1997-02-01

They report on the ultralow-temperature resonant-mass gravitational-wave detector NAUTILUS operating at the Frascati INFN Laboratories. The present aim of this detector is to achieve a sensitivity sufficient to detect bursts of gravitational radiation from sources located in our Galaxy and in the local group. Progress in transducer technology is likely to lead to sensitivities that will enable them to observe events from sources as far away as the Virgo cluster of galaxies. They describe the cryogenic apparatus, readout system cosmic-ray veto system, and give first results obtained during one year of continuous operation at T = 0.1 K. In particular the Brownian noise of the detector at T = 0.1 K was measured. The measured strain sensitivity was h-tilde ∼ 6 10 -22 Hz -1/2 at the frequencies of the two modes, 908 Hz and 924 Hz, with bandwidths of about 1 Hz

SWIMS: a small-angle multiple scattering computer code

International Nuclear Information System (INIS)

Sayer, R.O.

1976-07-01

SWIMS (Sigmund and WInterbon Multiple Scattering) is a computer code for calculation of the angular dispersion of ion beams that undergo small-angle, incoherent multiple scattering by gaseous or solid media. The code uses the tabulated angular distributions of Sigmund and Winterbon for a Thomas-Fermi screened Coulomb potential. The fraction of the incident beam scattered into a cone defined by the polar angle α is computed as a function of α for reduced thicknesses over the range 0.01 less than or equal to tau less than or equal to 10.0. 1 figure, 2 tables

ATDRS payload technology R & D

Science.gov (United States)

Anzic, G.; Connolly, D. J.; Fujikawa, G.; Andro, M.; Kunath, R. R.; Sharp, G. R.

Four technology development tasks were chosen to reduce (or at least better understand) the technology risks associated with proposed approaches to Advanced Tracking and Data Relay Satellite (ATDRS). The four tasks relate to a Tri-Band Antenna feed system, a Digital Beamforming System for the S Band Multiple-Access System (SMA), an SMA Phased Array Antenna, and a Configuration Thermal/Mechanical Analysis task. The objective, approach, and status of each are discussed.

ATDRS payload technology R & D

Science.gov (United States)

Anzic, G.; Connolly, D. J.; Fujikawa, G.; Andro, M.; Kunath, R. R.; Sharp, G. R.

1990-01-01

Four technology development tasks were chosen to reduce (or at least better understand) the technology risks associated with proposed approaches to Advanced Tracking and Data Relay Satellite (ATDRS). The four tasks relate to a Tri-Band Antenna feed system, a Digital Beamforming System for the S Band Multiple-Access System (SMA), an SMA Phased Array Antenna, and a Configuration Thermal/Mechanical Analysis task. The objective, approach, and status of each are discussed.

Advanced relay technologies in next generation wireless communications

CERN Document Server

Krikidis, Ioannis

2016-01-01

This book details the use of the cooperative networks/relaying approach in new and emerging telecommunications technologies such as full-duplex radio, massive multiple-input multiple-output (MIMO), network coding and spatial modulation, and new application areas including visible light communications (VLC), wireless power transfer, and 5G.

Legal aspects of auxillary reproductive technologies in infertility treatment

OpenAIRE

V.Yu. Albitskiy; N.D. Odinayeva; V.O. Mansimova

2011-01-01

The article presents several aspects of legal regulation of auxillary reproductive technologies in treatment of infertility in Russia and other countries.Key words: auxillary reproductive technologies, method of extracorporeal fertilization, newborn, premature newborn, multiple pregnancy, embryo, infertility, law.

Designing an Electronic Patient Management System for Multiple Sclerosis: Building a Next Generation Multiple Sclerosis Documentation System.

Science.gov (United States)

Kern, Raimar; Haase, Rocco; Eisele, Judith Christina; Thomas, Katja; Ziemssen, Tjalf

2016-01-08

Technologies like electronic health records or telemedicine devices support the rapid mediation of health information and clinical data independent of time and location between patients and their physicians as well as among health care professionals. Today, every part of the treatment process from diagnosis, treatment selection, and application to patient education and long-term care may be enhanced by a quality-assured implementation of health information technology (HIT) that also takes data security standards and concerns into account. In order to increase the level of effectively realized benefits of eHealth services, a user-driven needs assessment should ensure the inclusion of health care professional perspectives into the process of technology development as we did in the development process of the Multiple Sclerosis Documentation System 3D. After analyzing the use of information technology by patients suffering from multiple sclerosis, we focused on the needs of neurological health care professionals and their handling of health information technology. Therefore, we researched the status quo of eHealth adoption in neurological practices and clinics as well as health care professional opinions about potential benefits and requirements of eHealth services in the field of multiple sclerosis. We conducted a paper-and-pencil-based mail survey in 2013 by sending our questionnaire to 600 randomly chosen neurological practices in Germany. The questionnaire consisted of 24 items covering characteristics of participating neurological practices (4 items), the current use of network technology and the Internet in such neurological practices (5 items), physicians' attitudes toward the general and MS-related usefulness of eHealth systems (8 items) and toward the clinical documentation via electronic health records (4 items), and physicians' knowledge about the Multiple Sclerosis Documentation System (3 items). From 600 mailed surveys, 74 completed surveys were returned

Aligning business processes and IT of multiple collaborating organisations

NARCIS (Netherlands)

Kassahun, Ayalew

2017-01-01

When multiple organisations want to collaborate with one another they have to integrate their business processes. This requires aligning the collaborative business processes and the underlying IT (Information Technology). Realizing the required alignment is, however, not trivial and is the

Reducing measurement uncertainty drives the use of multiple technologies for supporting metrology

Science.gov (United States)

Banke, Bill, Jr.; Archie, Charles N.; Sendelbach, Matthew; Robert, Jim; Slinkman, James A.; Kaszuba, Phil; Kontra, Rick; DeVries, Mick; Solecky, Eric P.

2004-05-01

Perhaps never before in semiconductor microlithography has there been such an interest in the accuracy of measurement. This interest places new demands on our in-line metrology systems as well as the supporting metrology for verification. This also puts a burden on the users and suppliers of new measurement tools, which both challenge and complement existing manufacturing metrology. The metrology community needs to respond to these challenges by using new methods to assess the fab metrologies. An important part of this assessment process is the ability to obtain accepted reference measurements as a way of determining the accuracy and Total Measurement Uncertainty (TMU) of an in-line critical dimension (CD). In this paper, CD can mean any critical dimension including, for example, such measures as feature height or sidewall angle. This paper describes the trade-offs of in-line metrology systems as well as the limitations of Reference Measurement Systems (RMS). Many factors influence each application such as feature shape, material properties, proximity, sampling, and critical dimension. These factors, along with the metrology probe size, interaction volume, and probe type such as e-beam, optical beam, and mechanical probe, are considered. As the size of features shrinks below 100nm some of the stalwarts of reference metrology come into question, such as the electrically determined transistor gate length. The concept of the RMS is expanded to show how multiple metrologies are needed to achieve the right balance of accuracy and sampling. This is also demonstrated for manufacturing metrology. Various comparisons of CDSEM, scatterometry, AFM, cross section SEM, electrically determined CDs, and TEM are shown. An example is given which demonstrates the importance in obtaining TMU by balancing accuracy and precision for selecting manufacturing measurement strategy and optimizing manufacturing metrology. It is also demonstrated how the necessary supporting metrology will

Legal aspects of auxillary reproductive technologies in infertility treatment

Directory of Open Access Journals (Sweden)

V.Yu. Albitskiy

2011-01-01

Full Text Available The article presents several aspects of legal regulation of auxillary reproductive technologies in treatment of infertility in Russia and other countries.Key words: auxillary reproductive technologies, method of extracorporeal fertilization, newborn, premature newborn, multiple pregnancy, embryo, infertility, law.

40 CFR 63.487 - Batch front-end process vents-reference control technology.

Science.gov (United States)

2010-07-01

... § 63.487 Batch front-end process vents—reference control technology. (a) Batch front-end process vents... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Batch front-end process vents-reference control technology. 63.487 Section 63.487 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

Investigation on compression behaviour of highly compacted GMZ01 bentonite with suction and temperature control

Energy Technology Data Exchange (ETDEWEB)

Ye, W.M., E-mail: ye_tju@tongji.edu.cn [Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education, Tongji University, Shanghai 200092 (China); United Research Center for Urban Environment and Sustainable Development, The Ministry of Education, Shanghai 200092 (China); Zhang, Y.W.; Chen, B.; Zheng, Z.J.; Chen, Y.G. [Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education, Tongji University, Shanghai 200092 (China); Cui, Y.J. [Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education, Tongji University, Shanghai 200092 (China); Ecole des Ponts ParisTech, UR Navier/CERMES 77455 (France)

2012-11-15

Highlights: Black-Right-Pointing-Pointer Heating induced volumetric change of GMZ01 bentonite depends on suction. Black-Right-Pointing-Pointer Suction has significant influence on compressibility. Black-Right-Pointing-Pointer Temperature has slight influence on compressibility. - Abstract: In this paper, an oedometer with suction and temperature control was developed. Mechanical compaction tests have been performed on the highly compacted GMZ01 bentonite, which has been recognized as potential buffer/backfill material for construction of Chinese high-level radioactive waste (HLW) geological repository, under conditions of suction ranging from 0 to 110 MPa, temperature from 20 to 80 Degree-Sign C and vertical pressure from 0.1 to 80 MPa. Based on the test results, suction and temperature effects on compressibility parameters are investigated. Results reveal that: (1) at high suctions, heating induced an expansion, while contraction is induced by heating at low suctions. The thermal expansion coefficient of GMZ01 bentonite measured is 1 Multiplication-Sign 10{sup -4} Degree-Sign C{sup -1}; (2) with increasing suction, the elastic compressibility {kappa} and the plastic compressibility {lambda}(s) of the highly compacted GMZ01 bentonite decrease, while the pre-consolidation pressure increases markedly; (3) with increasing temperature, the elastic compressibility of compacted GMZ01 bentonite changes insignificantly, while the plastic compressibility {lambda}(s) slightly decreases and the yield surface tends to shrink.

GPM Level 3 IMERG Monthly 0.1 x 0.1 degree V03

Data.gov (United States)

National Aeronautics and Space Administration — This Directory Interchange Format (DIF) describes a collection of fields for the GPM Level 3 IMERG Final Monthly 0.1 x 0.1 degree V03 (GPM_3IMERGM) at the NASA...

Diagnostic Technologies in Practice

Science.gov (United States)

Steinberg, Malcolm; Kwag, Michael; Chown, Sarah A.; Doupe, Glenn; Trussler, Terry; Rekart, Michael; Gilbert, Mark

2015-01-01

Diagnosing HIV-positive gay men through enhanced testing technologies that detect acute HIV infection (AHI) or recent HIV infection provides opportunities for individual and population health benefits. We recruited 25 men in British Columbia who received an acute (n = 13) or recent (n = 12) HIV diagnosis to engage in a longitudinal multiple-methods study over one year or longer. Our thematic analysis of baseline qualitative interviews revealed insights within men’s accounts of technologically mediated processes of HIV discovery and diagnosis. Our analysis illuminated the dialectic of new HIV technologies in practice by considering the relationship between advances in diagnostics (e.g., nucleic acid amplification tests) and the users of these medical technologies in clinical settings (e.g., clients and practitioners). Technological innovations and testing protocols have shifted experiences of learning of one’s HIV-positive status; these innovations have created new diagnostic categories that require successful interpretation and translation to be rendered meaningful, to alleviate uncertainty, and to support public health objectives. PMID:25201583

History of Antenna Technology for Mobile Communications in Korea

Science.gov (United States)

Min, Kyeong-Sik; Park, Chul-Keun; Kang, Suk-Youb

In this paper, we discuss the development of wireless and mobile communications in Korea, current technological trends, and the future outlook on technological developments. Since the introduction of the telegraph and the telephone in September 1885, Korea's wired and wireless communications industry has consistently developed for over 100 years. Since 1984, upon the provision of the mobile telecommunications service, the industry has seen drastic qualitative and quantitative growth in terms of both technical and economic aspects, which played a crucial role in the rapid growth of the digital industry in Korea. After the era of the analog cellular service based on the Advanced Mobile Phone System (AMPS), a precursor to the modern mobile service, Korea became the world's first country to commercialize Code Division Multiple Access (CDMA) in 1996 and succeeded in commercializing CDMA 2000 lx (IMT 2000) in 2001. With further developments in the mobile communication technology, the technology for antennas also saw drastic advancements. As the mobile antennas moved from the second to the third generation, they grew from external models to very small internal models. At the same time, they evolved into highly functional and high performance multiple band and wide band antennas. Furthermore, Korea was the first country to commercialize and offer the Wireless Broadband Internet (WiBro) service in 2006. By leading the wireless communications standardization and exerting remarkable efforts in research and development, Korea is consolidating its status as an Information Technology (IT) leader in the global market. The antenna's inherent importance will be further emphasized in the near future as it satisfies the performance and structural needs of portable terminals necessary for realizing the projected establishment of the ubiquitous world. It is thought that antenna technologies will not be limited to simple concepts as previously experienced but will utilize various kinds

WE-G-BRB-01: The Importance of NIH Funding in Innovation in Radiation Therapy

International Nuclear Information System (INIS)

Deye, J.

2015-01-01

Over the past 20 years the NIH has funded individual grants, program projects grants, and clinical trials which have been instrumental in advancing patient care. The ways that each grant mechanism lends itself to the different phases of translating research into clinical practice will be described. Major technological innovations, such as IMRT and proton therapy, have been advanced with R01-type and P01-type funding and will be discussed. Similarly, the role of program project grants in identifying and addressing key hypotheses on the potential of 3D conformal therapy, normal tissue-guided dose escalation and motion management will be described. An overview will be provided regarding how these technological innovations have been applied to multi-institutional NIH-sponsored trials. Finally, the panel will discuss regarding which research questions should be funded by the NIH to inspire the next advances in radiation therapy. Learning Objectives: Understand the different funding mechanisms of the NIH Learn about research advances that have led to innovation in delivery Review achievements due to NIH-funded program project grants in radiotherapy over the past 20 years Understand example advances achieved with multi-institutional clinical trials NIH

NRC Information Notice No. 93-01: Accuracy of motor-operated valve diagnostic equipment manufactured by Liberty Technologies

International Nuclear Information System (INIS)

Grimes, B.K.

1993-01-01

Most licensees rely on MOV diagnostic equipment to provide information on the thrust delivered by the motor actuator in opening or closing its valve. The various types of MOV diagnostic equipment estimate valve stem thrust using different parameters, such as displacement of the spring pack or strain in the stem, mounting bolts, or yoke. Liberty Technologies has developed MOV diagnostic equipment, referred to as the Valve Operation Test and Evaluation System (VOTES), that estimates the thrust needed to open or close a valve based on strain of the valve yoke. The VOTES equipment derives thrust from yoke strain that has been calibrated to stem thrust using measured diametral strain of the valve stem and nominal engineering material properties. On October 2, 1992, Liberty Technologies notified the NRC that it had determined that two new factors can affect the thrust values obtained with its equipment. Those factors involve (1) the possible use of improper stem material constants and (2) the failure to account for a torque effect when the VOTES equipment is calibrated by measuring strain in the threaded portion of the valve stem. Liberty Technologies provided information on performing manual calculations to address these factors and stated that its new software, Version 2.3, assists in performing corrections to the thrust data

46 CFR 190.01-1 - Application.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Application. 190.01-1 Section 190.01-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS CONSTRUCTION AND ARRANGEMENT Hull Structure § 190.01-1 Application. (a) The provisions of this subpart, with the exception of...

Spectroscopic studies on U(VI)-salicylate complex formation with multiple equilibria

Energy Technology Data Exchange (ETDEWEB)

Cha, W.; Cho, H.R.; Jung, E.C.; Park, K.K.; Kim, W.H.; Song, K. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of). Nuclear Chemistry Research Div.

2012-07-01

This study investigates multiple equilibria related to the formation of the U(VI)-salicylate complex in a pH range of 3.0-5.5 using UV-Vis absorption and fluorescence measurement techniques. The absorbance changes at the characteristic charge-transfer bands of the complex were monitored, and the results indicated the presence of multiple equilibria and the formation of both 1:1 and 1:2 (U(VI):salicylate) complexes possessing bi-dentate chelate structures. The determined step-wise formation constants (log K{sub 1:1} and log K{sub 1:2}) are as follows: 12.5 {+-} 0.1 and 11.4 {+-} 0.2 for salicylate, 11.2 {+-} 0.1 and 10.1 {+-} 0.2 for 5-sulfosalicylate, and 12.4 {+-} 0.1 and 11.4 {+-} 0.1 for 2,6-dihydroxybenzoate, respectively. The molar absorptivities of the complexes are also provided. Furthermore, time-resolved laser-induced luminescence spectra of U(VI) species demonstrate the presence of both a dynamic and static quenching process upon the addition of a salicylate ligand. Particularly for the luminescent hydroxouranyl species, a strong static quenching effect is observed. The results suggest that both the UO{sub 2}(HSal){sup +} and the U(VI)-Sal chelate complexes serve as ground-state complexes that induce static quenching. The Stern-Volmer parameters were derived based on the measured luminescent intensity and lifetime data. The static quenching constants (log K{sub S}) obtained are 3.3 {+-} 0.1, 4.9 {+-} 0.1, and 4.4 {+-} 0.1 for UO{sub 2}{sup 2+}, (UO{sub 2}){sub 2}(OH){sub 2}{sup 2+} and (UO{sub 2}){sub 3}(OH){sub 5}{sup +}, respectively. (orig.)

Spectroscopic studies on U(VI)-salicylate complex formation with multiple equilibria

International Nuclear Information System (INIS)

Cha, W.; Cho, H.R.; Jung, E.C.; Park, K.K.; Kim, W.H.; Song, K.

2012-01-01

This study investigates multiple equilibria related to the formation of the U(VI)-salicylate complex in a pH range of 3.0-5.5 using UV-Vis absorption and fluorescence measurement techniques. The absorbance changes at the characteristic charge-transfer bands of the complex were monitored, and the results indicated the presence of multiple equilibria and the formation of both 1:1 and 1:2 (U(VI):salicylate) complexes possessing bi-dentate chelate structures. The determined step-wise formation constants (log K 1:1 and log K 1:2 ) are as follows: 12.5 ± 0.1 and 11.4 ± 0.2 for salicylate, 11.2 ± 0.1 and 10.1 ± 0.2 for 5-sulfosalicylate, and 12.4 ± 0.1 and 11.4 ± 0.1 for 2,6-dihydroxybenzoate, respectively. The molar absorptivities of the complexes are also provided. Furthermore, time-resolved laser-induced luminescence spectra of U(VI) species demonstrate the presence of both a dynamic and static quenching process upon the addition of a salicylate ligand. Particularly for the luminescent hydroxouranyl species, a strong static quenching effect is observed. The results suggest that both the UO 2 (HSal) + and the U(VI)-Sal chelate complexes serve as ground-state complexes that induce static quenching. The Stern-Volmer parameters were derived based on the measured luminescent intensity and lifetime data. The static quenching constants (log K S ) obtained are 3.3 ± 0.1, 4.9 ± 0.1, and 4.4 ± 0.1 for UO 2 2+ , (UO 2 ) 2 (OH) 2 2+ and (UO 2 ) 3 (OH) 5 + , respectively. (orig.)

31 CFR 505.01 - Short title.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Short title. 505.01 Section 505.01 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... CERTAIN MERCHANDISE BETWEEN FOREIGN COUNTRIES § 505.01 Short title. The regulations in this part may be...

Distance technology transfer course content development.

Science.gov (United States)

2013-06-01

The Illinois Department of Transportation (IDOT) offers multiple technology transfer courses for engineering, : project design, and safety training for state and local agency personnel. These courses are often essential to the : agency mission. Becau...

Self-Rerouting and Curative Interconnect Technology (SERCUIT)

Science.gov (United States)

2017-12-01

SPECIAL REPORT RDMR-CS-17-01 SELF-REROUTING AND CURATIVE INTERCONNECT TECHNOLOGY (SERCUIT) Shiv Joshi Concepts to Systems, Inc...Final 4. TITLE AND SUBTITLE Self-Rerouting and Curative Interconnect Technology (SERCUIT) 5. FUNDING NUMBERS 6. AUTHOR(S) Shiv Joshi...concepts2systems.com (p) 434-207-5189 x (f) Click to view full size Title Contract Number SELF-REROUTING AND CURATIVE INTERCONNECT TECHNOLOGY (SERCUIT) W911W6-17-C-0029

41 CFR 101-26.503 - Multiple award schedule purchases made by GSA supply distribution facilities.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Multiple award schedule... Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 26-PROCUREMENT SOURCES AND PROGRAM 26.5-GSA Procurement Programs § 101-26.503...

42 CFR 412.88 - Additional payment for new medical service or technology.

Science.gov (United States)

2010-10-01

... for new medical service or technology. (a) For discharges involving new medical services or... medical service or technology. [66 FR 46924, Sept. 7, 2001, as amended at 67 FR 50111, Aug. 1, 2002; 69 FR... 42 Public Health 2 2010-10-01 2010-10-01 false Additional payment for new medical service or...

Technology transfer

International Nuclear Information System (INIS)

Anon.

1977-01-01

Illustrated by the example of the FRG's nuclear energy exports, it is shown that the nuclear technology transfer leads to new dimensions of intergovernmental relations, which hold within themselves on account of multiple state-to-state, scientific, industrial and - last but not least - personal contacts the chance of far-reaching friendships between countries and people. If the chance is taken, this can also be seen as an important contribution towards maintaining the peace. (orig.) [de

Analysis of multiple spurions and associated circuits in Cofrentes; Analisis de espurios multiples y circuitos asociados en C.N. Cofrentes

Energy Technology Data Exchange (ETDEWEB)

Molina, J. J.; Celaya, M. A.

2015-07-01

The article describes the process followed by the Cofrentes Nuclear Power Plant (CNC) to conduct the analysis of multiple spurious in compliance with regulatory standards IS-30 rev 1 and CSN Safety Guide 1.19 based on the recommendations of the NEI-00-01 Guidance for Post-fire Safe Shutdown Circuit and NUREG/CR-6850. Fire PRA Methodology for Nuclear Power Facilities. (Author)

Study about the sensibility in vitro of different strains of Vibrio cholera 01 exposed to 60 Co gamma radiation

International Nuclear Information System (INIS)

Moraes, Ivany Rodrigues de

1998-01-01

The presence of some microorganisms in food, or the metabolites originated during their own multiplication may bring several diseases to humans: intoxications and food borne infections. Among the agents that may cause those diseases, we find Vibrio cholerae 01. In this experiment, the studies are focused on the radiosensibility in vitro of four strains of V. cholerae 01, exposed to different doses of ionizing radiation of 60 Co. The results are compared with other data related to bacterial food borne diseases, including water. (author)

Pacific Northwest Laboratory tasks supporting the Office of Technology Development national program

International Nuclear Information System (INIS)

Slate, S.C.

1993-01-01

The purpose of this document is to provide a concise summary of the Pacific Northwest Laboratory's (PNL) tasks being conducted for the Department of Energy's (DOE) Office of Technology Development (OTD). The summaries are useful to principal investigators who want to link their work to others doing similar work, to staff in DOE operating programs who are looking for better solutions to current problems, and to private industry which may be interested in teaming with PNL to commercialize the technology. The tasks are organized within Hanford's overall Work Breakdown Structure (WBS), which is a hierarchical organization of the Hanford mission into subordinate missions. The technology development tasks are all in WBS 3.2. The first subordinate steps under WBS 3.2 are general categories of technology development, such as Soils and Groundwater Cleanup. The next level is the Integrated Program (IP) and Integrated Demonstration (ID) level. An IP is a centrally managed series of projects which explore and develop a particular technology, such as characterization, for application to a wide spectrum of problems. An ID brings multiple technology systems to bear on an actual problem; for example, a carbon tetrachloride plume migrating through the soil is being remediated with biological agents, heating the soil, and destruction of the contamination in vapor removed from the soil. IDs and IPs are identified by an alphanumeric code: GSO2 is the second ID under Groundwater and Soils Cleanup. The final step in the breakout is the Technical Task Plan (TTP). These are individual tasks which support the ID/IP. They are identified by a six-digit number in the format 3211-01. The WBS structure for Technology Development down to the ID/IP level is shown

25 CFR 543.16 - What are the minimum internal controls for information technology?

Science.gov (United States)

2010-04-01

... controls for information technology? (a) Physical security measures restricting access to agents, including... longer required. (2) In the event of remote access, the information technology employees must prepare a... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal controls for information...

Employing optical code division multiple access technology in the all fiber loop vibration sensor system

Science.gov (United States)

Tseng, Shin-Pin; Yen, Chih-Ta; Syu, Rong-Shun; Cheng, Hsu-Chih

2013-12-01

This study proposes a spectral amplitude coding-optical code division multiple access (SAC-OCDMA) framework to access the vibration frequency of a test object on the all fiber loop vibration sensor (AFLVS). Each user possesses an individual SAC, and fiber Bragg grating (FBG) encoders/decoders using multiple FBG arrays were adopted, providing excellent orthogonal properties in the frequency domain. The system also mitigates multiple access interference (MAI) among users. When an optical fiber is bent to a point exceeding the critical radius, the fiber loop sensor becomes sensitive to external physical parameters (e.g., temperature, strain, and vibration). The AFLVS involves placing a fiber loop with a specific radius on a designed vibration platform.

Nuclear medicine technology study guide

CERN Document Server

Patel, Dee

2011-01-01

Nuclear Medicine Technology Study Guide presents a comprehensive review of nuclear medicine principles and concepts necessary for technologists to pass board examinations. The practice questions and content follow the guidelines of the Nuclear Medicine Technology Certification Board (NMTCB) and American Registry of Radiological Technologists (ARRT), allowing test takers to maximize their success in passing the examinations. The book is organized by sections of increasing difficulty, with over 600 multiple-choice questions covering all areas of nuclear medicine, including radiation safety; radi

Modern supercritical fluid technology for food applications.

Science.gov (United States)

King, Jerry W

2014-01-01

This review provides an update on the use of supercritical fluid (SCF) technology as applied to food-based materials. It advocates the use of the solubility parameter theory (SPT) for rationalizing the results obtained when employing sub- and supercritical media to food and nutrient-bearing materials and for optimizing processing conditions. Total extraction and fractionation of foodstuffs employing SCFs are compared and are illustrated by using multiple fluids and unit processes to obtain the desired food product. Some of the additional prophylactic benefits of using carbon dioxide as the processing fluid are explained and illustrated with multiple examples of commercial products produced using SCF media. I emphasize the role of SCF technology in the context of environmentally benign and sustainable processing, as well as its integration into an overall biorefinery concept. Conclusions are drawn in terms of current trends in the field and future research that is needed to secure new applications of the SCF platform as applied in food science and technology.

Media and Multiplicity

DEFF Research Database (Denmark)

Blaagaard, Bolette

2010-01-01

In the past few years continental Europe has experienced a resurgence of right-wing party politics, nationalism and xenophobia. In this nationalist revival the media and advanced communications technologies have played a significant role, as evidenced by the debates following cases...... such as the Danish cartoon controversy, and Dutch politician Geert Wilders’s film, Fitna. Simultaneously, however, the media is more diverse and rhizomatic than ever and offers potential for cosmopolitanism, transnational ethical relations as well as radical anti-racist and anti-fascist interventions. This article...... explores the tensions within the relation between journalistic practice and the construction of the idea of the nation and the multiplicity of media and cultures which inhabit the spheres of journalism and nation....

Profitability of a Smallholder Late Season Rapid Multiplication of ...

African Journals Online (AJOL)

The study investigated the effects of increasing poultry manure rates on the soil physicochemical properties, crop productivity and economic returns to investment of late season rapid multiplication of cassava stem enterprise at the Teaching and Research Farm, Federal University of Technology, Owerri in the humid ...

Genetic and environmental determinants of 25-hydroxyvitamin D levels in multiple sclerosis

DEFF Research Database (Denmark)

Laursen, Julie H.; Søndergaard, Helle Bach; Albrechtsen, Anders

2015-01-01

BACKGROUND: Evidence is accumulating supporting a beneficial effect of vitamin D in multiple sclerosis (MS). Genome-wide association studies (GWAS) have shown significant associations between 25-hydroxyvitamin D (25(OH)D) and single nucleotide polymorphisms (SNPs) in key genes in the vitamin D...... discrimination (Life Technologies).RESULTS: We found significant associations between 25(OH)D and SNPs in GC (rs7041, p = 0.01 and rs2282679, p = 0.03) and CYP2R1 (rs10741657, p =1.8 × 10(-4)). Season of blood sampling (p = 2.8 × 10(-31)), sex (p = 1.9 × 10(-5)), BMI (p = 2.3 × 10(-5)), vitamin supplements (p...... = 7.0 × 10(-22)), and fish intake (p = 0.02) also had significant effects on 25(OH)D.CONCLUSION: In this cross-sectional study, we found significant effects of environmental factors and SNPs in GC and CYP2R1 on 25(OH)D in MS patients. Since 25(OH)D might have protective effects in MS, and vitamin D...

Flow with photon multiplicity detector: Past and future

Indian Academy of Sciences (India)

journal of. April 2003 physics pp. 739–752. Flow with photon multiplicity detector: Past and ... could the quantitative contribution from decay correlations be determined at that time. ... The present analysis deals with the data in the region 3.25 to 3.75 ..... Financial support from the Department of Science and Technology of the ...

Advancements in Nanomedicine for Multiple Myeloma.

Science.gov (United States)

Detappe, Alexandre; Bustoros, Mark; Mouhieddine, Tarek H; Ghoroghchian, P Peter

2018-06-01

In the past decades, considerable progress has been made in our understanding and treatment of multiple myeloma. Several challenges remain including our abilities to longitudinally image tumor responses to treatment, to combine various therapeutic agents with different mechanisms of action but with overlapping toxicities, and to efficiently harness the power of the immune system to augment remission and/or to induce permanent cures. Nanomedicine may help to address many of these outstanding issues, affording novel diagnostic capabilities and offering disruptive technologies that promise to revolutionize treatment. Here, we review recent developments and the future of nanomedicine for multiple myeloma, highlighting new considerations in nanoparticle designs that may help to augment active targeting, to facilitate longitudinal imaging, and to improve drug delivery. Copyright © 2018 Elsevier Ltd. All rights reserved.

The presence of pMRC01 promotes greater cell permeability and autolysis in lactococcal starter cultures.

Science.gov (United States)

Fallico, Vincenzo; McAuliffe, Olivia; Fitzgerald, Gerald F; Hill, Colin; Ross, R Paul

2009-08-15

Conjugative transfer of plasmid-associated properties is routinely used to generate food-grade derivatives of lactococcal starter strains with improved technological traits. However, the introduction of one or more plasmids in a single strain is likely to impose a burden on regular cell metabolism and may affect the growth characteristics of the transconjugant culture. The aim of this study was to evaluate the impact of the 60.2-kb plasmid pMRC01 (encoding for an abortive infection bacteriophage resistance system and production of the anti-microbial, lacticin 3147) on starter performance. Five lactococcal strains (L. lactis HP, 255A, SK1, 712 and IL1403) and their pMRC01-containing derivatives were compared in terms of technological properties, including analysis of growth, acidification and autolysis rates. The transconjugants exhibited lower specific growth rates and higher generation times compared to the parental strains when grown at 30 degrees C in glucose-M17, but the presence of pMRC01 did not significantly affect the acidification capacity of strains in 11% reconstituted skimmed milk and synthetic media. Levels of lactate dehydrogenase were two-fold higher in supernatants of transconjugants than in those of parental strains, after 24 and 72 h of growth at 30 degrees C in glucose-M17, suggesting that the presence of pMRC01 somehow accelerates and promotes cellular autolysis. Analysis by flow cytometry following live/dead staining confirmed this result by showing larger populations of injured and dead cells in pMRC01-carrying cultures compared to the parental strains. The results of this study reveal that the plasmid pMRC01 places a burden on lactococcal host metabolism, which is associated with an increased cell permeability and autolysis, without significantly affecting the acidification capacity of the starter. While the magnitude of these effects appears to be strain dependent, the production of the bacteriocin lacticin 3147 may not be involved.

Cost-Effective Additive Manufacturing in Space: HELIOS Technology Challenge Guide

Science.gov (United States)

DeVieneni, Alayna; Velez, Carlos Andres; Benjamin, David; Hollenbeck, Jay

2012-01-01

Welcome to the HELIOS Technology Challenge Guide. This document is intended to serve as a general road map for participants of the HELIOS Technology Challenge [HTC] Program and the associated inaugural challenge: HTC-01: Cost-Effective Additive Manufacturing in Space. Please note that this guide is not a rule book and is not meant to hinder the development of innovative ideas. Its primary goal is to highlight the objectives of the HTC-01 Challenge and to describe possible solution routes and pitfalls that such technology may encounter in space. Please also note that participants wishing to demonstrate any hardware developed under this program during any future HELIOS Technology Challenge showcase event(s) may be subject to event regulations to be published separately at a later date.

Effective capacity of multiple antenna channels: Correlation and keyhole

KAUST Repository

Zhong, Caijun

2012-01-01

In this study, the authors derive the effective capacity limits for multiple antenna channels which quantify the maximum achievable rate with consideration of link-layer delay-bound violation probability. Both correlated multiple-input single-output and multiple-input multiple-output keyhole channels are studied. Based on the closed-form exact expressions for the effective capacity of both channels, the authors look into the asymptotic high and low signal-to-noise ratio regimes, and derive simple expressions to gain more insights. The impact of spatial correlation on effective capacity is also characterised with the aid of a majorisation theory result. It is revealed that antenna correlation reduces the effective capacity of the channels and a stringent quality-of-service requirement causes a severe reduction in the effective capacity but can be alleviated by increasing the number of antennas. © 2012 The Institution of Engineering and Technology.

Area–Oriented Technology Mapping for LUT–Based Logic Blocks

Directory of Open Access Journals (Sweden)

Kubica Marcin

2017-03-01

Full Text Available One of the main aspects of logic synthesis dedicated to FPGA is the problem of technology mapping, which is directly associated with the logic decomposition technique. This paper focuses on using configurable properties of CLBs in the process of logic decomposition and technology mapping. A novel theory and a set of efficient techniques for logic decomposition based on a BDD are proposed. The paper shows that logic optimization can be efficiently carried out by using multiple decomposition. The essence of the proposed synthesis method is multiple cutting of a BDD. A new diagram form called an SMTBDD is proposed. Moreover, techniques that allow finding the best technology mapping oriented to configurability of CLBs are presented. In the experimental section, the presented method (MultiDec is compared with academic and commercial tools. The experimental results show that the proposed technology mapping strategy leads to good results in terms of the number of CLBs.

MIMO Technologies in 3GPP LTE and LTE-Advanced

Directory of Open Access Journals (Sweden)

Zhang Jianzhong(Charlie

2009-01-01

Full Text Available Abstract 3rd Generation Partnership Project (3GPP has recently completed the specification of the Long Term Evolution (LTE standard. Majority of the world's operators and vendors are already committed to LTE deployments and developments, making LTE the market leader in the upcoming evolution to 4G wireless communication systems. Multiple input multiple output (MIMO technologies introduced in LTE such as spatial multiplexing, transmit diversity, and beamforming are key components for providing higher peak rate at a better system efficiency, which are essential for supporting future broadband data service over wireless links. Further extension of LTE MIMO technologies is being studied under the 3GPP study item "LTE-Advanced" to meet the requirement of IMT-Advanced set by International Telecommunication Union Radiocommunication Sector (ITU-R. In this paper, we introduce various MIMO technologies employed in LTE and provide a brief overview on the MIMO technologies currently discussed in the LTE-Advanced forum.

Technology advancement for integrative stem cell analyses.

Science.gov (United States)

Jeong, Yoon; Choi, Jonghoon; Lee, Kwan Hyi

2014-12-01

Scientists have endeavored to use stem cells for a variety of applications ranging from basic science research to translational medicine. Population-based characterization of such stem cells, while providing an important foundation to further development, often disregard the heterogeneity inherent among individual constituents within a given population. The population-based analysis and characterization of stem cells and the problems associated with such a blanket approach only underscore the need for the development of new analytical technology. In this article, we review current stem cell analytical technologies, along with the advantages and disadvantages of each, followed by applications of these technologies in the field of stem cells. Furthermore, while recent advances in micro/nano technology have led to a growth in the stem cell analytical field, underlying architectural concepts allow only for a vertical analytical approach, in which different desirable parameters are obtained from multiple individual experiments and there are many technical challenges that limit vertically integrated analytical tools. Therefore, we propose--by introducing a concept of vertical and horizontal approach--that there is the need of adequate methods to the integration of information, such that multiple descriptive parameters from a stem cell can be obtained from a single experiment.

Total lymphoid irradiation in multiple sclerosis: blood lymphocytes and clinical course

International Nuclear Information System (INIS)

Cook, S.D.; Devereux, C.; Troiano, R.; Zito, G.; Hafstein, M.; Lavenhar, M.; Hernandez, E.; Dowling, P.C.

1987-01-01

We have found a significant relationship between blood lymphocyte count and prognosis in 45 patients receiving either total lymphoid irradiation or sham irradiation for chronic progressive multiple sclerosis. Patients with sustained lymphocyte counts less than 900 mm-3 for prolonged periods after treatment showed less rapid progression over the ensuing 3 years than did patients with multiple sclerosis who had lymphocyte counts above this level (p less than 0.01). Our results suggest that a simple laboratory test, the absolute blood lymphocyte count, may serve as a valuable barometer for monitoring the amount of immunosuppressive therapy needed to prevent progression in patients with multiple sclerosis, and possibly other autoimmune diseases

ATDRS payload technology research and development

Science.gov (United States)

Anzic, G.; Connolly, D. J.; Fujikawa, G.; Andro, M.; Kunath, R. R.; Sharp, G. R.

1990-01-01

Four technology development tasks were chosen to reduce (or at least better understand) the technology risks associated with proposed approaches to Advanced Tracking and Data Relay Satellite (ATDRS). The four tasks relate to a Tri-Band Antenna feed system, a Digital Beamforming System for the S Band Multiple Access System (SMA), an SMA Phased Array Antenna, and a Configuration Thermal/Mechanical Analysis task. The objective, approach, and status of each are discussed.

Photonics technology and university-driven business co-creation

Science.gov (United States)

Erland Østergaard, J.; Tanev, S.; Bue Andersen, T.; Bozhevolnyi, S. I.

2012-03-01

TEK-Momentum is the Business Innovation and Technology Department in the Faculty of Engineering at the University of Southern Denmark in Odense. Since its establishment in 2010 the Department has adopted an exploratory technology transfer, open business development and co-creation strategy that goes beyond traditional technology transfer activities. This is an emerging strategy that has been shaped for the last 5 years even before the formal establishment of TEKMomentum. It emerged out of multiple dialog-based interactions with small- and medium-sized companies by focusing on matching real life problems with potential problem solvers. The main priority of such strategy is maximizing the value of the potential contributions from the multiple stakeholders and not on the technology development issues per se. In this paper we will present an overview of TEK-Momentum's approach by using as case studies two recent successful projects. The first one focuses on the commercialization of an LED illumination system. The second one focuses on the commercialization of an optical ring resonator-based temperature sensor.

Beyond technology acceptance to effective technology use: a parsimonious and actionable model.

Science.gov (United States)

Holahan, Patricia J; Lesselroth, Blake J; Adams, Kathleen; Wang, Kai; Church, Victoria

2015-05-01

To develop and test a parsimonious and actionable model of effective technology use (ETU). Cross-sectional survey of primary care providers (n = 53) in a large integrated health care organization that recently implemented new medication reconciliation technology. Surveys assessed 5 technology-related perceptions (compatibility with work values, implementation climate, compatibility with work processes, perceived usefulness, and ease of use) and 1 outcome variable, ETU. ETU was measured as both consistency and quality of technology use. Compatibility with work values and implementation climate were found to have differential effects on consistency and quality of use. When implementation climate was strong, consistency of technology use was high. However, quality of technology use was high only when implementation climate was strong and values compatibility was high. This is an important finding and highlights the importance of users' workplace values as a key determinant of quality of use. To extend our effectiveness in implementing new health care information technology, we need parsimonious models that include actionable determinants of ETU and account for the differential effects of these determinants on the multiple dimensions of ETU. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Desarrollo tecnológico de una formulación de diclofenaco de sodio 0,1 % para administración oftálmica Technological development of a 0.1 % sodium diclophenac formulation for opththalmological use

Directory of Open Access Journals (Sweden)

Ania González Cortezón

2012-09-01

-rheumatic, anti-inflammatory, analgesic and antipyretic properties. It is prescribed to treat conjunctivitis, keratoconjunctivitis, corneal ulcers, corneal and conjunctival inflammation due to traumas. Additionally, it is used in reducing inflammation after the cataract surgery and in inhibiting the intraoperative myosis and the postoperative cystoid macular edema. Objective: to design a formulation of 0.1 % sodium diclophenac eye drops that meets the quality control parameters for this pharmaceutical form and that provides the desired therapeutic effect. Methods: five technological assays were conducted to adjust for the pH and the isotonicity of the formulation as required for an ophthalmologic preparation. Isotonicity was adjusted with boric acid, and Trometamin served to obtain highly stable pH. Results: the technological development of the formulation was satisfactory. There was obtained a product that met all the specifications described in the manufacturer's technique for the quality control. The physical, chemical and microbiological properties of the preparation remained unchanged for 12 months under storage conditions below 25 °C. Conclusions: the eye drop formulation, with sodium diclophenac as active principle, meets all the quality specifications for this pharmaceutical form to treat various eye diseases. This might broadens the therapeutic options in Cuba.

Mobile Game Development for Multiple Devices in Education

Directory of Open Access Journals (Sweden)

Baltasar Fernández-Manjón

2009-10-01

Full Text Available Mobile learning and educational gaming are two trends that are rapidly having an increasing impact in Technology-Enhanced Learning. However, both approaches present significant technological challenges. Mobile technologies are very diverse and the market pressure pushes the continuous development of new technologies and features. On the other hand, game-based learning needs to deal with enormous development costs and the problem of allowing instructors and experts to actively participate in the game development process. Moreover, there are numerous situations where bringing both approaches together could be very useful, but this combination magnifies the technological barriers previously described. In this work we present , an authoring environment for educational adventure games that supports the production of both desktop and mobile games. This framework provides a graphical environment that allows instructors to create their own educational games with a low cost. Then, the games can be exported to multiple formats, including support for diverse types of mobile platforms. This is achieved through a modular semi-automated exportation process, which is based on mobile device profiles.

Stem Cell Physics. Multiple-Laser-Beam Treatment of Parkinson's Disease

Science.gov (United States)

Stefan, V.

2013-03-01

A novel method for the treatment of Parkinson's disease is proposed. Pluripotent stem cells are laser cultured, using ultrashort wavelength, (around 0.1 micron-ultraviolet radiation-with intensities of a few mW/cm2) , multiple laser beams.[2] The multiple-energy laser photons[3] interact with the neuron DNA molecules to be cloned. The laser created dopaminergic substantia nigra neurons can be, (theoretically), laser transplanted, (a higher focusing precision as compared to a syringe method), into the striatum or substantia nigra regions of the brain, or both. Supported by Nikola Tesla Labs, Stefan University.

Comic Relief: Graduate Students Address Multiple Meanings for Technology Integration with Digital Comic Creation

Science.gov (United States)

Sockman, Beth Rajan; Sutton, Rhonda; Herrmann, Michele

2016-01-01

This study determined the usefulness of digital comic creation with 77 graduate students in a teacher technology course. Students completed an assigned reading and created digital comics that addressed technology integration concerns in the schools and society. Using practical action research, 77 student-created comics were analyzed. The findings…

Class II HLA interactions modulate genetic risk for multiple sclerosis

Science.gov (United States)

Dilthey, Alexander T; Xifara, Dionysia K; Ban, Maria; Shah, Tejas S; Patsopoulos, Nikolaos A; Alfredsson, Lars; Anderson, Carl A; Attfield, Katherine E; Baranzini, Sergio E; Barrett, Jeffrey; Binder, Thomas M C; Booth, David; Buck, Dorothea; Celius, Elisabeth G; Cotsapas, Chris; D’Alfonso, Sandra; Dendrou, Calliope A; Donnelly, Peter; Dubois, Bénédicte; Fontaine, Bertrand; Fugger, Lars; Goris, An; Gourraud, Pierre-Antoine; Graetz, Christiane; Hemmer, Bernhard; Hillert, Jan; Kockum, Ingrid; Leslie, Stephen; Lill, Christina M; Martinelli-Boneschi, Filippo; Oksenberg, Jorge R; Olsson, Tomas; Oturai, Annette; Saarela, Janna; Søndergaard, Helle Bach; Spurkland, Anne; Taylor, Bruce; Winkelmann, Juliane; Zipp, Frauke; Haines, Jonathan L; Pericak-Vance, Margaret A; Spencer, Chris C A; Stewart, Graeme; Hafler, David A; Ivinson, Adrian J; Harbo, Hanne F; Hauser, Stephen L; De Jager, Philip L; Compston, Alastair; McCauley, Jacob L; Sawcer, Stephen; McVean, Gil

2016-01-01

Association studies have greatly refined the understanding of how variation within the human leukocyte antigen (HLA) genes influences risk of multiple sclerosis. However, the extent to which major effects are modulated by interactions is poorly characterized. We analyzed high-density SNP data on 17,465 cases and 30,385 controls from 11 cohorts of European ancestry, in combination with imputation of classical HLA alleles, to build a high-resolution map of HLA genetic risk and assess the evidence for interactions involving classical HLA alleles. Among new and previously identified class II risk alleles (HLA-DRB1*15:01, HLA-DRB1*13:03, HLA-DRB1*03:01, HLA-DRB1*08:01 and HLA-DQB1*03:02) and class I protective alleles (HLA-A*02:01, HLA-B*44:02, HLA-B*38:01 and HLA-B*55:01), we find evidence for two interactions involving pairs of class II alleles: HLA-DQA1*01:01–HLA-DRB1*15:01 and HLA-DQB1*03:01–HLA-DQB1*03:02. We find no evidence for interactions between classical HLA alleles and non-HLA risk-associated variants and estimate a minimal effect of polygenic epistasis in modulating major risk alleles. PMID:26343388

Annual Technology Transfer Report FY 2017

Science.gov (United States)

2018-04-01

The U.S. Department of Transportation (U.S. DOT) is the Federal steward of the Nation's transportation system. U.S. DOT consists of multiple modal operating administrations (OAs) that carry out mission-related research, development, and technology (R...

Benefits and risks of smart home technologies

OpenAIRE

Wilson, Charlie; Hargreaves, Tom; Hauxwell-Baldwin, Richard

2017-01-01

Smart homes are a priority area of strategic energy planning and national policy. The market adoption of smart home technologies (SHTs) relies on prospective users perceiving clear benefits with acceptable levels of risk. This paper characterises the perceived benefits and risks of SHTs from multiple perspectives. A representative national survey of UK homeowners (n=1025) finds prospective users have positive perceptions of the multiple functionality of SHTs including energy management. Cedin...

Multi-technology positioning

CERN Document Server

Lohan, Elena-Simona; Wymeersch, Henk; Seco-Granados, Gonzalo; Nykänen, Ossi

2017-01-01

This book provides an overview of positioning technologies, applications and services in a format accessible to a wide variety of readers. Readers who have always wanted to understand how satellite-based positioning, wireless network positioning, inertial navigation, and their combinations work will find great value in this book. Readers will also learn about the advantages and disadvantages of different positioning methods, their limitations and challenges. Cognitive positioning, adding the brain to determine which technologies to use at device runtime, is introduced as well. Coverage also includes the use of position information for Location Based Services (LBS), as well as context-aware positioning services, designed for better user experience. • Brings understanding of positioning technology to readers from a variety of disciplines • Reviews multiple techniques, providing insight on the pros, cons and challenges related to each • Designed to be a tutorial on basic principles, avoiding unnecessary de...

33 CFR 66.01-10 - Characteristics.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Characteristics. 66.01-10 Section 66.01-10 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO... Characteristics. The characteristics of a private aid to navigation must conform to those prescribed by the United...

31 CFR 539.306 - Goods, technology, or services produced or provided by a designated foreign person.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Goods, technology, or services..., technology, or services produced or provided by a designated foreign person. With respect to the prohibitions in §§ 539.201 and 539.202, the term goods, technology, or services produced or provided by a...

Image transmission in multicore-fiber code-division multiple access network

Science.gov (United States)

Yang, Guu-Chang; Kwong, Wing C.

1997-01-01

Recently, two-dimensional (2-D) signature patterns were proposed to encode binary digitized image pixels in optical code-division multiple-access (CDMA) networks with 'multicore' fiber. The new technology enables parallel transmission and simultaneous access of 2-D images in multiple-access environment, where these signature patterns are defined as optical orthogonal signature pattern codes (OOSPCs). However, previous work on OOSPCs assumed that the weight of each signature pattern was the same. In this paper, we construct a new family of OOSPCs with the removal of this assumption. Since varying the weight of a user's signature pattern affects that user's performance, this approach is useful for CDMA optical systems with multiple performance requirements.

GPM Level 3 IMERG Half Hourly 0.1 x 0.1 degree V03

Data.gov (United States)

National Aeronautics and Space Administration — This Directory Interchange Format (DIF) describes a collection of fields for the GPM Level 3 IMERG Final Half Hourly 0.1 x 0.1 degree V03 (GPM_3IMERGHH) at the NASA...

The Impact of Technology Integration upon Collegiate Pedagogy from the Lens of Multiple Disciplines

Science.gov (United States)

Swanson, Joan Ann

2016-01-01

Technology integration on college campuses has become both a reality and necessity to meet the demands for function and flow in an ever advancing world of learning. This study qualitatively reviewed how a multi-disciplinary sample of collegiate instructors viewed technology and how they incorporated it into their pedagogy. Results indicated a…

Virtual Reality and Multiple Intelligences: Potentials for Higher Education.

Science.gov (United States)

McLellan, Hilary

1994-01-01

Discussion of the use of virtual reality in higher education looks at how this emerging computer-based technology can promote learning that engages all seven forms of intelligence proposed in H. Gardner's theory of multiple intelligences. Technical and conceptual issues in implementation of virtual reality in education are also examined.…

Technology is the answer, but what was the question?

DEFF Research Database (Denmark)

Unterrainer, Walter

2016-01-01

Whatever we do and wherever we are, we are surrounded by a multiplicity of technologies and the last decades showed an exponential application of ´new technologies´. Who for instance would want to miss our smartphones? It is a bizarre discrepancy: a slum dweller in India does not have access...

Information Communication Technology and the African Student ...

African Journals Online (AJOL)

To engage students, improve learning and become a cutting edge educator, ... instruction with online or mobile learning activities through the technological world ... The benefits of collaborative learning and teaching with multiple instructors; ...

Male gender and smoking are related to single, but not to multiple, human aortic aneurysms.

Science.gov (United States)

Gutierrez, Paulo S; Leite, Thiago N P; Mangione, Fernanda M

2015-01-01

There is scanty information concerning multiple aortic aneurysms. Thus, we verified if clinical or pathological characteristics are different in patients with multiple (two or more) aortic aneurysms in comparison with those with only one. We selected at the necropsy files of the Heart Institute, São Paulo University School of Medicine, the last 100 cases with aortic aneurysms, comparing between the two groups: sex, age, presence of systemic arterial hypertension, diabetes, dyslipedemia, history of smoking habit, cause of the aneurysm, cause of death, and if the diagnosis was reached during life. Age was analysed by Mann-Whitney test, and the other variables by chi-square or Fisher's exact test. Multiple aneurysms corresponded to 14% of cases. The proportion of women among patients with multiple aneurysms was higher than among those with single aneurysm (64.3% versus 20.9%, P<.01), even if only cases with atherosclerosis were taken into consideration (women among multiple-6/10, 60.0%; among single-14/70, 20.0%; P=.01). Smoking was less reported in cases with multiple (4/14, 28.6%) than with single aneurysm (53/86, 61.6%; P=.04); considering cases with atherosclerosis, such difference decreases (40.0% of multiple versus 68.6% of single, P=.09). although atherosclerosis is present in most cases of both single and multiple aortic aneurysms, male gender and smoking, considered highly influential in such lesions, are less frequent in patients with multiple than in patients with single aneurysms. Thus mechanisms underlying multiple aortic aneurysms are probably different from those related to single, more common aneurysms. Copyright © 2015 Elsevier Inc. All rights reserved.

Dielectric and magnetic properties of Ba-, La- and Pb-doped Bi0.8Gd0.1M0.1Fe0.9Ti0.1O3 perovskite ceramics

Directory of Open Access Journals (Sweden)

Radheshyam Rai

2014-04-01

Full Text Available The multiferroic Bi0.8Gd0.1M0.1Fe0.9Ti0.1O3, (where M = Ba (DB, La (DL and Pb (DP has been synthesized by using solid-state reaction technique. Effects of Ba, La and Pb substitution on the structure, electrical and ferroelectric properties of Bi0.8Gd0.1M0.1Fe0.9Ti0.1O3 samples have been studied by performing X-ray diffraction, dielectric and magnetic measurements. The crystal structures of the ceramic samples have a tetragonal phase. The vibrating sample magnetometer (VSM measurement shows a significant change in the magnetic properties of Ba-doped Bi0.8Gd0.1M0.1Fe0.9Ti0.1O3 as compared to La- and Pb-doped ceramics. It is seen that coercive field (HC and remanent magnetization (MR increases with Ba-doped ceramics but decreases for La- and Pb-doped ceramics.

Multiple Case Study of STEM in School-Based Agricultural Education

Science.gov (United States)

Stubbs, Eric A.; Myers, Brian E.

2015-01-01

This multiple case study investigated the integration of science, technology, engineering, and mathematics (STEM) in three Florida high school agriculture programs. Observations, interviews, documents, and artifacts provided qualitative data that indicated the types of STEM knowledge taught. Variables of interest included student and teacher…

Demonstrating and Deploying Private Sector Technologies at DOE Sites - Issues to be Overcome

International Nuclear Information System (INIS)

Bedick, R. C.

2002-01-01

The Department of Energy (DOE), Office of Environmental Management (EM) continues to pursue cost-effective, environmental cleanup of the weapons complex sites with a concomitant emphasis on deployment of innovative technologies as a means to this end. The EM Office of Science and Technology (OST) pursues a strategy that entails identification of technologies that have potential applications throughout the DOE complex: at multiple DOE sites and at multiple facilities on those sites. It further encourages a competitive procurement process for the various applications entailed in the remediation of a given facility. These strategies require a competitive private-sector supplier base to help meet EM needs. OST supports technology development and deployment through investments in partnerships with private industry to enhance the acceptance of their technology products within the DOE market. Since 1992, OST and the National Energy Technology Laboratory (NETL) have supported the re search and development of technology products and services offered by the private sector. During this time, NETL has managed over 140 research and development projects involving industrial and university partners. These projects involve research in a broad range of EM related topics, including deactivation and decommissioning, characterization, monitoring, sensors, waste separation, groundwater remediation, robotics, and mixed waste treatment. Successful partnerships between DOE and Industry have resulted in viable options for EM's cleanup needs, and require continued marketing efforts to ensure that these technology solutions are used at multiple DOE sites and facilities

42 CFR 416.185 - Process for establishing a new class of new technology IOLs.

Science.gov (United States)

2010-10-01

... Process for establishing a new class of new technology IOLs. (a) Announcement of deadline for requests for... 42 Public Health 3 2010-10-01 2010-10-01 false Process for establishing a new class of new technology IOLs. 416.185 Section 416.185 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT...

The Evolution of Ecosystems for Converging Technologies – Drivers and Barriers of Technology Exploration and Exploitation

DEFF Research Database (Denmark)

Laufs, Daniel; Giones, Ferran; Schultz, Carsten

2018-01-01

Convergent technologies, like biotechnology, rely on the contribution of multiple scientific disciplines and are applied to distant needs and markets. As such, the development of technologies and related applications fields require the evolution of ecosystems that involve multidisciplinary......, previously unrelated, actors in collaborative exploration and exploitation processes. We know little on how these processes unfold, in particular in the early stages of the ecosystem development. Previous research suggests that human and social capital [1], patents and VC funding [2], or market orientation....... This helps us to generate an understanding of the pattern of technology convergence as well as of the drivers and barriers that affect the innovation process. In order to develop a holistic framework of the interplay between technology exploration and exploitation and the relevant ecosystem, we perform...

40 CFR 450.24 - New source performance standards reflecting the best available demonstrated control technology...

Science.gov (United States)

2010-07-01

... performance standards reflecting the best available demonstrated control technology (NSPS). Any new source... 40 Protection of Environment 29 2010-07-01 2010-07-01 false New source performance standards reflecting the best available demonstrated control technology (NSPS). 450.24 Section 450.24 Protection of...

Emergent methods, methodologies, technologies and tools for design and engineering processes

NARCIS (Netherlands)

Wendrich, Robert E.; Horvath, I.; Suarez, J.P.

2018-01-01

This (borderline, shallow) paper is a raw perspective, a take on, partly based on, and inspired by the work of Goldschmidt [01], Gabora [02] and Tversky [03] who assert that visual and meta-cognitive stimuli constructed from multiple experiences and multiple modalities in ‘design spaces’ (i.e.

Elucidate Innovation Performance of Technology-driven Mergers and Acquisitions

Energy Technology Data Exchange (ETDEWEB)

Huang, L.; Wang, K.; Yu, H.; Shang, L.; Mitkova, L.

2016-07-01

The importance and value of Mergers and Acquisitions (M&As) have increased with the expectancy to obtain key technology capabilities and rapid impact on innovation. This article develops an original analytical framework to elucidate the impact of the technology and product relatedness (similarity/complementarity) of the Technology-driven M&A’ partners on post-innovation performance. We present results drawing on a multiple case studies of Chinese High-Tech firms from three industries. (Author)

Inteligencias múltiples percibidas por las docentes de los estudiantes de cinco años de la Red 01 Región Callao

OpenAIRE

Ipanaqué Moreno, María Carmen Rosa; Rojas del Águila, Mery

2012-01-01

The aim of this study was to describe the multiple intelligences in students 5 years of educational institutions of the network 01 of Callao, measured with the scale of observation of Multiple Intelligences (Walls, 1999), in dimensions linguistic intelligence, logical mathematical , spatial, kinesthetic, musical, interpersonal and intrapersonal. The research design used was descriptive simple. As the sample 100 students from preschool 52 men, 48 women and 5 teachers. The results show that chi...

Soil burial method for plastic degradation performed by Pseudomonas PL-01, Bacillus PL-01, and indigenous bacteria

Science.gov (United States)

Shovitri, Maya; Nafi'ah, Risyatun; Antika, Titi Rindi; Alami, Nur Hidayatul; Kuswytasari, N. D.; Zulaikha, Enny

2017-06-01

Lately, plastic bag is becoming the most important pollutant for environment since it is difficult to be naturally degraded due to it consists of long hydrocarbon polymer chains. Our previous study indicated that our pure isolate Pseudomonas PL-01 and Bacillus PL-01 could degrade about 10% plastic bag. This present study was aimed to find out whether Pseudomonas PL01 and Bacillus PL01 put a positive effect to indigenous bacteria from marginal area in doing plastic degradation with a soil burial method. Beach sand was used as a representative marginal area, and mangrove sediment was used as a comparison. Plastics were submerged into unsterile beach sand with 10% of Pseudomonas PL-01 or Bacillus PL-01 containing liquid minimal salt medium (MSM) separately, while other plastics were submerged into unsterile mangrove sediments. After 4, 8, 12 and 16 weeks, their biofilm formation on their plastic surfaces and plastic degradation were measured. Results indicated that those 2 isolates put positive influent on biofilm formation and plastic degradation for indigenous beach sand bacteria. Bacillus PL-01 put higher influent than Pseudomonas PL-01. Plastic transparent was preferable degraded than black and white plastic bag `kresek'. But anyhow, indigenous mangrove soil bacteria showed the best performance in biofilm formation and plastic degradation, even without Pseudomonas PL-01 or Bacillus PL-01 addition. Fourier Transform Infrared (FTIR) analysis complemented the results; there were attenuated peaks with decreasing peaks transmittances. This FTIR peaks indicated chemical functional group changes happened among the plastic compounds after 16 weeks incubation time.

Human-Robot Teaming for Hydrologic Data Gathering at Multiple Scales

Science.gov (United States)

Peschel, J.; Young, S. N.

2017-12-01

The use of personal robot-assistive technology by researchers and practitioners for hydrologic data gathering has grown in recent years as barriers to platform capability, cost, and human-robot interaction have been overcome. One consequence to this growth is a broad availability of unmanned platforms that might or might not be suitable for a specific hydrologic investigation. Through multiple field studies, a set of recommendations has been developed to help guide novice through experienced users in choosing the appropriate unmanned platforms for a given application. This talk will present a series of hydrologic data sets gathered using a human-robot teaming approach that has leveraged unmanned aerial, ground, and surface vehicles over multiple scales. The field case studies discussed will be connected to the best practices, also provided in the presentation. This talk will be of interest to geoscience researchers and practitioners, in general, as well as those working in fields related to emerging technologies.

Innovation investment area: Technology summary

Energy Technology Data Exchange (ETDEWEB)

1994-03-01

The mission of Environmental Management`s (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area`s (IIA) two program elements: RDDT&E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation.

Innovation investment area: Technology summary

International Nuclear Information System (INIS)

1994-03-01

The mission of Environmental Management's (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area's (IIA) two program elements: RDDT ampersand E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation

46 CFR 190.01-15 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Special consideration. 190.01-15 Section 190.01-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS CONSTRUCTION AND ARRANGEMENT Hull Structure § 190.01-15 Special consideration. (a) Special consideration will...

Learning Effects of Interactive Whiteboard Pedagogy for Students in Taiwan from the Perspective of Multiple Intelligences

Science.gov (United States)

Chen, Hong-Ren; Chiang, Chih-Hao; Lin, Wen-Shan

2013-01-01

With the rapid progress in information technology, interactive whiteboards have become IT-integrated in teaching activities. The theory of multiple intelligences argues that every person possesses multiple intelligences, emphasizing learners' cognitive richness and the possible role of these differences in enhanced learning. This study is the…

Low technology tissue culture materials for initiation and ...

African Journals Online (AJOL)

Low technology tissue culture materials for initiation and multiplication of banana plants. ... African Crop Science Journal ... locally available macronutrients, micronutrients, sugar, equipment and facility reduced the cost of consumable material

An Evaluation of Multimodal Interactions with Technology while Learning Science Concepts

Science.gov (United States)

Anastopoulou, Stamatina; Sharples, Mike; Baber, Chris

2011-01-01

This paper explores the value of employing multiple modalities to facilitate science learning with technology. In particular, it is argued that when multiple modalities are employed, learners construct strong relations between physical movement and visual representations of motion. Body interactions with visual representations, enabled by…

Human Spaceflight Technology Needs - A Foundation for JSC's Technology Strategy

Science.gov (United States)

Stecklein, Jonette M.

2013-01-01

Human space exploration has always been heavily influenced by goals to achieve a specific mission on a specific schedule. This approach drove rapid technology development, the rapidity of which adds risks as well as provides a major driver for costs and cost uncertainty. The National Aeronautics and Space Administration (NASA) is now approaching the extension of human presence throughout the solar system by balancing a proactive yet less schedule-driven development of technology with opportunistic scheduling of missions as the needed technologies are realized. This approach should provide cost effective, low risk technology development that will enable efficient and effective manned spaceflight missions. As a first step, the NASA Human Spaceflight Architecture Team (HAT) has identified a suite of critical technologies needed to support future manned missions across a range of destinations, including in cis-lunar space, near earth asteroid visits, lunar exploration, Mars moons, and Mars exploration. The challenge now is to develop a strategy and plan for technology development that efficiently enables these missions over a reasonable time period, without increasing technology development costs unnecessarily due to schedule pressure, and subsequently mitigating development and mission risks. NASA's Johnson Space Center (JSC), as the nation s primary center for human exploration, is addressing this challenge through an innovative approach in allocating Internal Research and Development funding to projects. The HAT Technology Needs (TechNeeds) Database has been developed to correlate across critical technologies and the NASA Office of Chief Technologist Technology Area Breakdown Structure (TABS). The TechNeeds Database illuminates that many critical technologies may support a single technical capability gap, that many HAT technology needs may map to a single TABS technology discipline, and that a single HAT technology need may map to multiple TABS technology

Human spaceflight technology needs-a foundation for JSC's technology strategy

Science.gov (United States)

Stecklein, J. M.

Human space exploration has always been heavily influenced by goals to achieve a specific mission on a specific schedule. This approach drove rapid technology development, the rapidity of which added risks and became a major driver for costs and cost uncertainty. The National Aeronautics and Space Administration (NASA) is now approaching the extension of human presence throughout the solar system by balancing a proactive yet less schedule-driven development of technology with opportunistic scheduling of missions as the needed technologies are realized. This approach should provide cost effective, low risk technology development that will enable efficient and effective manned spaceflight missions. As a first step, the NASA Human Spaceflight Architecture Team (HAT) has identified a suite of critical technologies needed to support future manned missions across a range of destinations, including in cis-lunar space, near earth asteroid visits, lunar exploration, Mars moons, and Mars exploration. The challenge now is to develop a strategy and plan for technology development that efficiently enables these missions over a reasonable time period, without increasing technology development costs unnecessarily due to schedule pressure, and subsequently mitigating development and mission risks. NASA's Johnson Space Center (JSC), as the nation's primary center for human exploration, is addressing this challenge through an innovative approach in allocating Internal Research and Development funding to projects. The HAT Technology Needs (Tech Needs) Database has been developed to correlate across critical technologies and the NASA Office of Chief Technologist Technology Area Breakdown Structure (TABS). The TechNeeds Database illuminates that many critical technologies may support a single technical capability gap, that many HAT technology needs may map to a single TABS technology discipline, and that a single HAT technology need may map to multiple TABS technology disciplines. Th

Disruptive technology disorder: A past, present, and future neurologic syndrome.

Science.gov (United States)

Weaver, Donald F

2017-07-25

Based upon an analysis of 6 major historical technological advances over the last 150 years, a new syndrome, disruptive technology disorder (DTD), is introduced. DTD describes the human health ailments that accompany the implementation of disruptive technologies. Elevator sickness, railway spine, and bicycle face are representative examples. Though the underlying causative disruptive technologies may differ, many neurologic symptoms (headache, dizziness, weakness) are common to multiple DTDs. Born of technology-driven societal change, DTDs manifest as a complex interplay between biological and psychological symptoms. © 2017 American Academy of Neurology.

Specialised Sweetpotato Vine Multiplication in Lake Zone, Tanzania: What “Sticks” and What Changes?

Directory of Open Access Journals (Sweden)

McEwan Margaret A.

2017-02-01

Full Text Available In Lake Zone, Tanzania, farmers were trained to multiply and distribute quality sweetpotato planting material. The objectives of this study were to assess changes in skills and practices among the trained farmers as vine multiplication became a specialized task. Nine months after the project ended, all 88 decentralized vine multipliers (DVMs operating as groups (72% or individuals (28% were visited and qualitative data on their current multiplication practices collected through a questionnaire, checklists and observations. Results showed that 69% of DVMs were still multiplying vines, but less than half were using the seed production technologies promoted by the project. 34% used rapid multiplication beds; 61% used conventional plant spacing on ridges for roots and vines and 5% used both. As the vine multiplication cycle became a specialised activity, the multiplication and root production cycles were separated. Vines were treated differently in terms of site selection, length of cutting and spacing, depending on whether the objective of their use was for high root or high vine production. Capacity building of specialised vine multipliers and scaling-up seed interventions should consider the implications of skilling and task segregation in a broader context based on society’s choice of technologies and agrarian change.

46 CFR 92.01-15 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Special consideration. 92.01-15 Section 92.01-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS CONSTRUCTION AND ARRANGEMENT Hull Structure § 92.01-15 Special consideration. (a) Special consideration will be...

Multiple, connective intellection: the condition for invention

Directory of Open Access Journals (Sweden)

C S (Fanie de Beer

2015-11-01

Full Text Available Since this article involves invention, the conditions for inventiveness become the issue: assuming multiple reality; thinking in a special way; transgressing boundaries; acknowledging networks (in the terms of Michel Serres: communication, transduction, interference, distribution, passages between the sciences. There are, however, misplaced expectations: technology should work wonders in this regard while forgetting that humans, redefined though, remain the key to establish connections and networks between people, paradigms, disciplines, sciences and technologies. Against this background, Michel Serres’s emphasis on invention and “thinking as invention” and his a-critical anti-method – ‘connective, multiple intellection’ which is a special kind of thought – are desperately needed. Guattari’s articulation of the three ecologies and the ecosophic views he developed in this regard provides a significant amplification of the approach of ‘multiple connective intellection’. These insights can be enlightened and strongly driven home through the views of Latour with an anthropological and socio-dynamic perspective on the scientific endeavour with the articulation of the actor-network theory inherited from Serres. The thoughtful beyond-methodology of Edgar Morin with his strong noological position as the ultimate condition for inventiveness, and Gregory Ulmer with his special emphasis on invention and inventiveness, especially with the help and assistance of electronic means (video and internet, and with his work with the architect Bernard Tschumi on invention and inventiveness, are of special significance in the sphere of inventiveness, the real and final guarantee for a spirited re-enchantment of the world as well as the final demonstration that the battle for intelligence as opposed to ignorance, stupidity and barbarism can be fought with great hope to succeed.

Research on applicability of optical and digital technologies to nuclear power stations

International Nuclear Information System (INIS)

Emoto, Motonori

1990-01-01

Recently, the development of electronic technology represented by optical multiple transmission technology and digital technology is remarkable, and it is expected that this tendency advances further hereafter. The improvement of the reliability, operational performance and maintainability of nuclear power stations by applying these most advanced technologies to them has been desired. In this research, it was found that by the application of optical multiple transmission and digital technology to nuclear power stations, their operation by a small number of operators, the automation of work management and so on can be realized. Besides, it was found that as the major technologies of hereafter, the advance of artificial intelligence technology, rapid and large capacity information processing, the network of the computers of different types and others is necessary. Further, if these technologies are completed, the clarification of the requirement when those are actually applied to nuclear power stations is necessary, and it was found also that as the matters to be considered at that time, the extent of improvement of reliability, the reduction of risk at the time of the troubles of equipment and other fundamental matters must be clarified hereafter. (K.I.)

21 CFR 1321.01 - DEA mailing addresses.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 9 2010-04-01 2010-04-01 false DEA mailing addresses. 1321.01 Section 1321.01 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE DEA MAILING ADDRESSES § 1321.01 DEA mailing addresses. The following table provides information regarding mailing addresses to be used...

46 CFR 72.01-20 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Special consideration. 72.01-20 Section 72.01-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS CONSTRUCTION AND ARRANGEMENT Hull Structure § 72.01-20 Special consideration. (a) Special consideration will be given to the...

Multiple sclerosis risk loci and disease severity in 7,125 individuals from 10 studies

DEFF Research Database (Denmark)

George, Michaela F; Briggs, Farren B S; Shao, Xiaorong

2016-01-01

associated with disease severity after accounting for cohort, sex, age at onset, and HLA-DRB1*15:01. After restricting analyses to cases with disease duration ≥10 years, associations were null (p value ≥0.05). No SNP was associated with disease severity after adjusting for multiple testing. CONCLUSIONS......OBJECTIVE: We investigated the association between 52 risk variants identified through genome-wide association studies and disease severity in multiple sclerosis (MS). METHODS: Ten unique MS case data sets were analyzed. The Multiple Sclerosis Severity Score (MSSS) was calculated using the Expanded...

Calculation of contribution of multiple interactions and efficiency of neutron detectors

International Nuclear Information System (INIS)

Androsenko, A.A.; Androsenko, P.A.; Kazakov, L.E.; Kononov, V.N.; Poletaev, E.D.

1986-01-01

Results of calculation of multiple neutron interactions contribution to efficiency of detectors with 6 Li glass and 10 B plate in the energy range of 0.01-1 MeV are given. The calculation was performed by the Monte-Carlo method using BRAND program complex. It is shown that a correction value for multiple neutron interaction in 6 Li glass of 1 mm thickness constitutes 4.5 % at energy of up to 100 keV and at higher energies has a complex energy dependence reaching 25 % at 440 keV

Analysis of multiple spurions and associated circuits in Cofrentes

International Nuclear Information System (INIS)

Molina, J. J.; Celaya, M. A.

2015-01-01

The article describes the process followed by the Cofrentes Nuclear Power Plant (CNC) to conduct the analysis of multiple spurious in compliance with regulatory standards IS-30 rev 1 and CSN Safety Guide 1.19 based on the recommendations of the NEI-00-01 Guidance for Post-fire Safe Shutdown Circuit and NUREG/CR-6850. Fire PRA Methodology for Nuclear Power Facilities. (Author)

STOMP Subsurface Transport Over Multiple Phases: User's guide

International Nuclear Information System (INIS)

White, M.D.; Oostrom, M.

1997-10-01

The U.S. Department of Energy, through the Office of Technology Development, has requested the demonstration of remediation technologies for the cleanup of volatile organic compounds and associated radionuclides within the soil and groundwater at arid sites. This demonstration program, called the VOC-Arid Soils Integrated Demonstration Program (Arid-ID), has been initially directed at a volume of unsaturated and saturated soil contaminated with carbon tetrachloride, on the Hanford Site near Richland, Washington. A principal subtask of the Arid-ID program involves the development of an integrated engineering simulator for evaluating the effectiveness and efficiency of various remediation technologies. The engineering simulator''s intended users include scientists and engineers who are investigating soil physics phenomena associated with remediation technologies. Principal design goals for the engineer simulator include broad applicability, verified algorithms, quality assurance controls, and validated simulations against laboratory and field-scale experiments. An important goal for the simulator development subtask involves the ability to scale laboratory and field-scale experiments to full-scale remediation technologies, and to transfer acquired technology to other arid sites. The STOMP (Subsurface Transport Over Multiple Phases) simulator has been developed by the Pacific Northwest National Laboratory for modeling remediation technologies. Information on the use, application, and theoretical basis of the STOMP simulator theory and discussions on the governing equations, constitutive relations, and numerical solution algorithms for the STOMP simulator

STOMP Subsurface Transport Over Multiple Phases: Application guide

International Nuclear Information System (INIS)

Nichols, W.E.; Aimo, N.J.; Oostrom, M.; White, M.D.

1997-09-01

The U.S. Department of Energy (DOE), through the Office of Technology Development, has requested the demonstration of remediation technologies for the cleanup of volatile organic compounds and associated radionuclides within the soil and ground water at arid sites. This demonstration program, called the VOC-Arid Soils Integrated Demonstrated Program (Arid-ID), has been initially directed at a volume of unsaturated and saturated soil contaminated with carbon tetrachloride on the Hanford Site near Richland, Washington. A principal subtask of the Arid-ID program involves the development of an integrated engineering simulator for evaluating the effectiveness and efficiency of various remediation technologies. The engineering simulator''s intended users include scientists and engineers who are investigating soil physics phenomena associated with remediation technologies. Principal design goals for the engineering simulator include broad applicability, verified algorithms, quality assurance controls, and validated simulations against laboratory and field-scale experiments. An important goal for the simulator development subtask involves the ability to scale laboratory and field-scale experiments to full-scale remediation technologies, and to transfer acquired technology to other arid sites. The STOMP (Subsurface Transport Over Multiple Phases) simulator has been developed by the Pacific Northwest Laboratory for modeling remediation technologies. Information on the use, application, and theoretical basis of the STOMP simulator are documented in three companion guide guides. This document, the Application Guide, provides a suite of example applications of the STOMP simulator

Efficacy of a brief image-based multiple-behavior intervention for college students.

Science.gov (United States)

Werch, Chudley E; Moore, Michele J; Bian, Hui; DiClemente, Carlo C; Ames, Steven C; Weiler, Robert M; Thombs, Dennis; Pokorny, Steven B; Huang, I-Chan

2008-10-01

Epidemiologic data indicate most adolescents and adults experience multiple, simultaneous risk behaviors. The purpose of this study is to examine the efficacy of a brief image-based multiple-behavior intervention (MBI) for college students. A total of 303 college students were randomly assigned to: (1) a brief MBI or (2) a standard care control, with a 3-month postintervention follow-up. Omnibus treatment by time multivariate analysis of variance interactions were significant for three of six behavior groupings, with improvements for college students receiving the brief MBI on alcohol consumption behaviors, F(6, 261) = 2.73, p = 0.01, marijuana-use behaviors, F(4, 278) = 3.18, p = 0.01, and health-related quality of life, F(5, 277) = 2.80, p = 0.02, but not cigarette use, exercise, and nutrition behaviors. Participants receiving the brief MBI also got more sleep, F(1, 281) = 9.49, p = 0.00, than those in the standard care control. A brief image-based multiple-behavior intervention may be useful in influencing a number of critical health habits and health-related quality-of-life indicators of college students.

Robotics and tele-operation technology for applications in nuclear fields

International Nuclear Information System (INIS)

Kosuge, Kazuhiro; Hirata, Yasuhisa; Takeo, Koji

2002-01-01

In this article, we introduce available robotics and tele-operation technology for applications in Nuclear Fields. First, robotics technology for manipulation of a large object is introduced which has been experimentally applied to ITER Maintenance Robot. Then, transportation technology of a large object by multiple mobile robots is reviewed. At last, recent tele-operation technologies and a prototype tele-operation system, referred to as VISIT (Visual Interface System for Interactive Task-execution), is introduced. Several experimental results are also introduced. (author)

The history of Belgian assisted reproduction technology cycle registration and control: a case study in reducing the incidence of multiple pregnancy.

Science.gov (United States)

De Neubourg, D; Bogaerts, K; Wyns, C; Albert, A; Camus, M; Candeur, M; Degueldre, M; Delbaere, A; Delvigne, A; De Sutter, P; Dhont, M; Dubois, M; Englert, Y; Gillain, N; Gordts, S; Hautecoeur, W; Lesaffre, E; Lejeune, B; Leroy, F; Ombelet, W; Perrier D'Hauterive, S; Vandekerckhove, F; Van der Elst, J; D'Hooghe, T

2013-10-01

What is the effect of a legal limitation of the number of embryos that can be transferred in an assisted reproductive technology (ART) cycle on the multiple delivery rate? The Belgian national register shows that the introduction of reimbursement of ART laboratory costs in July 2003, and the imposition of a legal limitation of the number of embryos transferred in the same year, were associated with a >50% reduction of the multiple pregnancy rate from 27 to 11% between 2003 and the last assessment in 2010, without any reduction of the pregnancy rate per cycle. Individual Belgian IVF centres have published their results since the implementation of the law, and these show a decrease in the multiple pregnancy rate on a centre by centre basis. However, the overall national picture remains unpublished. Cohort study from 1990 to 2010 of all ART cycles in Belgium (2685 cycles in 1990 evolving to 19 110 cycles in 2010), with a retrospective analysis from 1990 to 2000 and prospective online data collection since 2001. Registration evolved from paper written reports per centre to a compulsory online registration of all ART cycles. From 2001 up to mid-2009, data were collected from Excel spread sheets or MS Access files into an MS Access database. Since mid-2009, data collection is done via a remote and secured web-based system (www.belrap.be) where centres can upload their data and get immediate feedback about missing data, errors and inconsistencies. National Belgian registration data show that reimbursement of IVF laboratory costs in July 2003, coupled to a legal limitation in the number of embryos transferred in utero, were associated with a 50% reduction of the multiple pregnancy rate from 27 to 11% without reduction of the pregnancy rate per cycle, and with an increase in the number of fresh and frozen ART cycles due to improved access to treatment. There is potential underreporting of complications of ART treatment, pregnancy outcome and neonatal health. Over the 20

Effect of total lymphoid irradiation in chronic progressive multiple sclerosis

International Nuclear Information System (INIS)

Cook, S.D.; Devereux, C.; Troiano, R.; Hafstein, M.P.; Zito, G.; Hernandez, E.; Lavenhar, M.; Vidaver, R.; Dowling, P.C.

1986-01-01

Total lymphoid irradiation (TLI; 1980 cGy) or sham irradiation was given to 40 patients with chronic progressive multiple sclerosis (MS) in a prospective, randomised, double-blind study. During mean follow-up of 21 months, MS patients treated with TLI has less functional decline than sham-irradiated MS patients (p<0.01). A significant relation was noted between absolute blood lymphocyte counts in the first year after TLI and subsequent course, patients with higher lymphocyte counts generally having a worse prognosis (p<0.01). TLI was well tolerated and associated with only mild short-term, and to date, long-term side-effects. (author)

The dark side of technologies: technostress among users of information and communication technologies.

Science.gov (United States)

Salanova, Marisa; Llorens, Susana; Cifre, Eva

2013-01-01

This paper tests the structure and the predictors of two psychological experiences of technostress associated with the use of information and communication technologies (ICT), i.e., technostrain (users report feelings of anxiety, fatigue, scepticism and inefficacy beliefs related to the use of technologies) and technoaddiction (users feel bad due to an excessive and compulsive use of these technologies). The study included a sample of 1072 ICT users (N = 675 nonintensive ICT users and N = 397 intensive ICT users). Results from multigroup confirmatory factor analyses among non-intensive and intensive ICT users showed, as expected, the four-factor structure of technostrain in both samples. Secondly, and also as expected, confirmatory factorial analyses revealed that technostress experiences are characterized not only by technostrain but also by an excessive and compulsive use of ICT. Moreover, multiple analyses of variance showed significant differences between non-intensive and intensive ICT users (1) in the dimensions of technostress and (2) in specific job demands and job/personal resources. Finally, linear multiple regression analyses revealed that technostrain is positively predicted by work overload, role ambiguity, emotional overload, mobbing and obstacles hindering ICT use, as well as by lack of autonomy, transformational leadership, social support, ICT use facilitators and mental competences. Work overload, role ambiguity and mobbing, as well as the lack of emotional competences, positively predict technoaddiction. Theoretical and practical implications, in addition to future research, are discussed.

Which User of technology? Perspectivising the UTAUT model by application of the SFL language Pronoun System towards a systems perspective of technology acceptance and use

Directory of Open Access Journals (Sweden)

Cheryl Marie Cordeiro

2018-04-01

Full Text Available This study applies systemic functional linguistics (SFL as complementary framework of analysis of technology acceptance models (TAMs. The purpose is to bridge research methodology language in international business (IB studies and engineering management science. Currently TAMs and its consolidated version, the Unified Theory of Acceptance and Use of Technology (UTAUT provides for a typology of one user in one context scenario. The need for the UTAUT model to account for multiple users in multiple work contexts in a single framework of analysis was foregrounded in the study of the workflow processes of a remote services business model of a European founded multinational business enterprise (MBE with regards to its (i intra-firm improvements in managing remote services cases, and its (ii extra-firm selling of life cycle management remote services contracts. The Enterprise has global operations in over 100 countries, of which this study focused on its European operations of improving the quality of remote services for the marine industry. Through an application of SFL unto UTAUT, this study illustrates how multiple users in multiple contexts can be analysed simultaneously, and whose behaviours can be accounted for in a single framework of analysis. The combined SFL UTAUT model addresses the initial statisticity of the UTAUT model, whilst at the same time, expands upon current theoretical perspectives of technology use and acceptance that can be applied in practice.

46 CFR 52.01-10 - Automatic controls.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Automatic controls. 52.01-10 Section 52.01-10 Shipping... Requirements § 52.01-10 Automatic controls. (a) Each main boiler must meet the special requirements for automatic safety controls in § 62.35-20(a)(1) of this chapter. (b) Each automatically controlled auxiliary...

SDG and qualitative trend based model multiple scale validation

Science.gov (United States)

Gao, Dong; Xu, Xin; Yin, Jianjin; Zhang, Hongyu; Zhang, Beike

2017-09-01

Verification, Validation and Accreditation (VV&A) is key technology of simulation and modelling. For the traditional model validation methods, the completeness is weak; it is carried out in one scale; it depends on human experience. The SDG (Signed Directed Graph) and qualitative trend based multiple scale validation is proposed. First the SDG model is built and qualitative trends are added to the model. And then complete testing scenarios are produced by positive inference. The multiple scale validation is carried out by comparing the testing scenarios with outputs of simulation model in different scales. Finally, the effectiveness is proved by carrying out validation for a reactor model.

Competition in a technological niche: the cars of the future

NARCIS (Netherlands)

Bakker, S.; Lente, H. van; Engels, R.

2012-01-01

The notion of ‘niche’has proved to be useful to account for the emergence of radical innovations. Most studies, however, deal with the development of single emerging technologies. In this paper we address the competition between multiple niche technologies.Within the niche of the ‘car of the future’

Health technology assessment on the use of magnetic resonance imaging (MRI) and computed tomography (CT) in the diagnosis of multiple sclerosis (MS) and clinically isolated syndromes (CIS)

Energy Technology Data Exchange (ETDEWEB)

Achten, Eric [Department of Radiology, Ghent University, De Pintelaan 185, B-9000 Gent (Belgium)], E-mail: rik.achten@ugent.be; Deblaere, Karel [Department of Radiology, Ghent University, De Pintelaan 185, B-9000 Gent (Belgium)], E-mail: karel.deblaere@ugent.be

2008-02-15

This work is the result of a health technology assessment for the Flemish regional government, Belgium, performed in 2006. A search of the available literature in the databases Medline and EMBASE was performed to find evidence for a rational choice between CT and MRI techniques in the work-up of patients with clinically isolated syndrome (CIS) with a suspicion for multiple sclerosis (MS), and in follow-up exams performed in such patients. From the presented evidence, in patients referred for CIS or MS, MR is superior to CT for detection and characterization of brain and spine lesions.

The Cure for HPC Neurosis: Multiple, Virtual Personalities!

Energy Technology Data Exchange (ETDEWEB)

Farber, Rob

2007-06-30

The selection of a new supercomputer for a scientific data center represents an interesting neurotic condition stemming from the conflict between a compulsion to acquire the best of the latest generation computer hardware, and unresolved issues as users seek validation from legacy scientific software - sometimes euphemistically called “research quality code”. Virtualization technology, now a mainstream feature on modern processors, permits multiple operating systems to efficiently and simultaneously run on each node of a supercomputer (or even your laptop and workstation). The benefits of this technology are many, ranging from supporting legacy software to paving the way towards robust petascale (1015 floating point operations per second) and eventually exascale (1018 floating point operations per second) computing.

46 CFR 58.01-10 - Fuel oil.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Fuel oil. 58.01-10 Section 58.01-10 Shipping COAST GUARD... SYSTEMS General Requirements § 58.01-10 Fuel oil. (a) The following limits apply to the use of oil as fuel: (1) Except as otherwise permitted by this section, no fuel oil with a flashpoint of less than 60 °C...

Photonics technology and University-driven business co-creation

DEFF Research Database (Denmark)

Tanev, Stoyan; Østergaard, John Erland; Andersen, Thomas Bue Søndergaard

2012-01-01

TEK-Momentum is the Business Innovation and Technology Department in the Faculty of Engineering at the University of Southern Denmark in Odense. Since its establishment in 2010 the Department has adopted an exploratory technology transfer, open business development and co-creation strategy...... that goes beyond traditional technology transfer activities. This is an emerging strategy that has been shaped for the last 5 years even before the formal establishment of TEK-Momentum. It emerged out of multiple dialog-based interactions with small- and medium-sized companies by focusing on matching real...

TH-CD-207B-01: BEST IN PHYSICS (IMAGING): Development of High Brightness Multiple-Pixel X-Ray Source Using Oxide Coated Cathodes

Energy Technology Data Exchange (ETDEWEB)

Kandlakunta, P; Pham, R; Zhang, T [Washington University School of Medicine, St. Louis, MO (United States)

2016-06-15

Purpose: To develop and characterize a high brightness multiple-pixel thermionic emission x-ray (MPTEX) source. Methods: Multiple-pixel x-ray sources allow for designs of novel x-ray imaging techniques, such as fixed gantry CT, digital tomosynthesis, tetrahedron beam computed tomography, etc. We are developing a high-brightness multiple-pixel thermionic emission x-ray (MPTEX) source based on oxide coated cathodes. Oxide cathode is chosen as the electron source due to its high emission current density and low operating temperature. A MPTEX prototype has been developed which may contain up to 41 micro-rectangular oxide cathodes in 4 mm pixel spacing. Electronics hardware was developed for source control and switching. The cathode emission current was evaluated and x-ray measurements were performed to estimate the focal spot size. Results: The oxide cathodes were able to produce ∼110 mA cathode current in pulse mode which corresponds to an emission current density of 0.55 A/cm{sup 2}. The maximum kVp of the MPTEX prototype currently is limited to 100 kV due to the rating of high voltage feedthrough. Preliminary x-ray measurements estimated the focal spot size as 1.5 × 1.3 mm{sup 2}. Conclusion: A MPTEX source was developed with thermionic oxide coated cathodes and preliminary source characterization was successfully performed. The MPTEX source is able to produce an array of high brightness x-ray beams with a fast switching speed.

TH-CD-207B-01: BEST IN PHYSICS (IMAGING): Development of High Brightness Multiple-Pixel X-Ray Source Using Oxide Coated Cathodes

International Nuclear Information System (INIS)

Kandlakunta, P; Pham, R; Zhang, T

2016-01-01

Purpose: To develop and characterize a high brightness multiple-pixel thermionic emission x-ray (MPTEX) source. Methods: Multiple-pixel x-ray sources allow for designs of novel x-ray imaging techniques, such as fixed gantry CT, digital tomosynthesis, tetrahedron beam computed tomography, etc. We are developing a high-brightness multiple-pixel thermionic emission x-ray (MPTEX) source based on oxide coated cathodes. Oxide cathode is chosen as the electron source due to its high emission current density and low operating temperature. A MPTEX prototype has been developed which may contain up to 41 micro-rectangular oxide cathodes in 4 mm pixel spacing. Electronics hardware was developed for source control and switching. The cathode emission current was evaluated and x-ray measurements were performed to estimate the focal spot size. Results: The oxide cathodes were able to produce ∼110 mA cathode current in pulse mode which corresponds to an emission current density of 0.55 A/cm 2 . The maximum kVp of the MPTEX prototype currently is limited to 100 kV due to the rating of high voltage feedthrough. Preliminary x-ray measurements estimated the focal spot size as 1.5 × 1.3 mm 2 . Conclusion: A MPTEX source was developed with thermionic oxide coated cathodes and preliminary source characterization was successfully performed. The MPTEX source is able to produce an array of high brightness x-ray beams with a fast switching speed.

Multiple sporadic colorectal cancers display a unique methylation phenotype.

Directory of Open Access Journals (Sweden)

Victoria Gonzalo

Full Text Available Epigenetics are thought to play a major role in the carcinogenesis of multiple sporadic colorectal cancers (CRC. Previous studies have suggested concordant DNA hypermethylation between tumor pairs. However, only a few methylation markers have been analyzed. This study was aimed at describing the epigenetic signature of multiple CRC using a genome-scale DNA methylation profiling. We analyzed 12 patients with synchronous CRC and 29 age-, sex-, and tumor location-paired patients with solitary tumors from the EPICOLON II cohort. DNA methylation profiling was performed using the Illumina Infinium HM27 DNA methylation assay. The most significant results were validated by Methylight. Tumors samples were also analyzed for the CpG Island Methylator Phenotype (CIMP; KRAS and BRAF mutations and mismatch repair deficiency status. Functional annotation clustering was performed. We identified 102 CpG sites that showed significant DNA hypermethylation in multiple tumors with respect to the solitary counterparts (difference in β value ≥0.1. Methylight assays validated the results for 4 selected genes (p = 0.0002. Eight out of 12(66.6% multiple tumors were classified as CIMP-high, as compared to 5 out of 29(17.2% solitary tumors (p = 0.004. Interestingly, 76 out of the 102 (74.5% hypermethylated CpG sites found in multiple tumors were also seen in CIMP-high tumors. Functional analysis of hypermethylated genes found in multiple tumors showed enrichment of genes involved in different tumorigenic functions. In conclusion, multiple CRC are associated with a distinct methylation phenotype, with a close association between tumor multiplicity and CIMP-high. Our results may be important to unravel the underlying mechanism of tumor multiplicity.

40 CFR 75.82 - Monitoring of Hg mass emissions and heat input at common and multiple stacks.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Monitoring of Hg mass emissions and... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTINUOUS EMISSION MONITORING Hg Mass Emission Provisions § 75.82 Monitoring of Hg mass emissions and heat input at common and multiple stacks. (a) Unit...

Multiple sclerosis-associated retrovirus, Epstein-Barr virus, and vitamin D status in patients with relapsing remitting multiple sclerosis.

Science.gov (United States)

Mostafa, Aliehossadat; Jalilvand, Somayeh; Shoja, Zabihollah; Nejati, Ahmad; Shahmahmoodi, Shohreh; Sahraian, Mohammad Ali; Marashi, Sayed Mahdi

2017-07-01

The relationship between infections and autoimmune diseases is complex and there are several reports highlighting the role of human endogenous retroviruses (HERVs) in these patients. The levels of multiple sclerosis-associated retrovirus (MSRV)-type DNA of Env gene was measured in peripheral blood mononuclear cells from 52 patients with relapsing-remitting multiple sclerosis (RRMS) and 40 healthy controls using specific quantitative PCR (qPCR) analysis. Furthermore, we analyzed the status of HERV-W/MSRV in these patients with regards to both EBV (DNA load and anti-EBNA1 IgG antibody) and vitamin D concentration. MSRV DNA copy number were significantly higher in RRMS patients than healthy controls (P < 0.0001). Interestingly, an inverse correlation was found between MSRV DNA copy number and serum vitamin D concentration (P < 0.01), but not for EBV load or anti-EBNA-1 IgG antibody. © 2017 Wiley Periodicals, Inc.

Common and Low Frequency Variants in MERTK Are Independently Associated with Multiple Sclerosis Susceptibility with Discordant Association Dependent upon HLA-DRB1*15:01 Status.

Directory of Open Access Journals (Sweden)

Michele D Binder

2016-03-01

Full Text Available Multiple Sclerosis (MS is a chronic inflammatory demyelinating disease of the central nervous system. The risk of developing MS is strongly influenced by genetic predisposition, and over 100 loci have been established as associated with susceptibility. However, the biologically relevant variants underlying disease risk have not been defined for the vast majority of these loci, limiting the power of these genetic studies to define new avenues of research for the development of MS therapeutics. It is therefore crucial that candidate MS susceptibility loci are carefully investigated to identify the biological mechanism linking genetic polymorphism at a given gene to the increased chance of developing MS. MERTK has been established as an MS susceptibility gene and is part of a family of receptor tyrosine kinases known to be involved in the pathogenesis of demyelinating disease. In this study we have refined the association of MERTK with MS risk to independent signals from both common and low frequency variants. One of the associated variants was also found to be linked with increased expression of MERTK in monocytes and higher expression of MERTK was associated with either increased or decreased risk of developing MS, dependent upon HLA-DRB1*15:01 status. This discordant association potentially extended beyond MS susceptibility to alterations in disease course in established MS. This study provides clear evidence that distinct polymorphisms within MERTK are associated with MS susceptibility, one of which has the potential to alter MERTK transcription, which in turn can alter both susceptibility and disease course in MS patients.

Space Technology Mission Directorate Game Changing Development Program FY2015 Annual Program Review: Advanced Manufacturing Technology

Science.gov (United States)

Vickers, John; Fikes, John

2015-01-01

The Advance Manufacturing Technology (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of the Initiative is the Advanced Manufacturing National Program Office (AMNPO), which includes participation from all federal agencies involved in U.S. manufacturing. In support of the AMNPO the AMT Project supports building and Growing the National Network for Manufacturing Innovation through a public-private partnership designed to help the industrial community accelerate manufacturing innovation. Integration with other projects/programs and partnerships: STMD (Space Technology Mission Directorate), HEOMD, other Centers; Industry, Academia; OGA's (e.g., DOD, DOE, DOC, USDA, NASA, NSF); Office of Science and Technology Policy, NIST Advanced Manufacturing Program Office; Generate insight within NASA and cross-agency for technology development priorities and investments. Technology Infusion Plan: PC; Potential customer infusion (TDM, HEOMD, SMD, OGA, Industry); Leverage; Collaborate with other Agencies, Industry and Academia; NASA roadmap. Initiatives include: Advanced Near Net Shape Technology Integrally Stiffened Cylinder Process Development (launch vehicles, sounding rockets); Materials Genome; Low Cost Upper Stage-Class Propulsion; Additive Construction with Mobile Emplacement (ACME); National Center for Advanced Manufacturing.

Technology Development Benefits and the Economics Breakdown Structure

Science.gov (United States)

Shaw, Eric J.

1998-01-01

This paper describes the construction and application of the EBS (Economics Breakdown Structure) in evaluating technology investments across multiple systems and organizations, illustrated with examples in space transportation technology. The United States Government (USG) has a long history of investing in technology to enable its missions. Agencies such as the National Aeronautics and Space Administration (NASA) and the Department of Defense (DoD) have evaluated their technology development programs primarily on their effects on mission performance and cost. More and more, though, USG agencies are being evaluated on their technology transfer to the commercial sector. In addition, an increasing number of USG missions are being accomplished by industry-led or joint efforts, where the USG provides technology and funding but tasks industry with development and operation of the mission systems.

Analysis of Trends and Factors in Breast Multiple Primary Malignant Neoplasms

Directory of Open Access Journals (Sweden)

Igor Motuzyuk

2018-02-01

Full Text Available Background: The study aims to evaluate the current state and tendencies in multiple primary breast cancer incidence, behavior, and treatment in Ukraine. Methods: A total of 2032 patients who received special treatment at the Department of Breast Tumors and Reconstructive Surgery of the National Cancer Institute from 2008 to 2015 were included in the study. Among them, there were 195 patients with multiple primary malignant neoplasms: 54.9% patients with synchronous cancer and 45.1% patients with metachronous cancer. The average age of patients was 46.6 years, and the percentage of postmenopausal women was 63.1%. Among patients with synchronous cancer, there were 56.1% patients with only breast localizations and 43.9% with combination of breast and other localizations, and among patients with metachronous cancer, there were 46.6% patients with only breast localizations and 53.4% with combination of breast and other localizations. All the patients were evaluated in terms of aggressiveness of the disease, survival rates, as well as risk factors and treatment options. Results: A more aggressive course of breast cancer is observed in patients exposed to radiation from the Chernobyl accident under the age of 30 years ( P  < .01. The clinical course of disease in patients with synchronous cancer is worse and prognostically unfavorable compared with metachronous cancer ( P  < .01. The course of the disease in patients who underwent mastectomy is worse compared with patients who underwent breast-conserving surgery ( P  < .01. Plastic and reconstructive surgery in patients with synchronous cancer was proven to be reasonable in terms of increase in survival ( P  < .01. Conclusions: The patients with multiple primary breast cancer should have attentive management and treatment. Multidisciplinary team should concern all the risk factors and provide the most sufficient option of management. This is crucial to continue research in this

Validation the methodology calculate critical position of control rods to the critical facility IPEN/MB-01

International Nuclear Information System (INIS)

Lopez Aldama, D.; Rodriguez Gual, R.

1998-01-01

Presently work intends to validate the models and programs used in the Nuclear Technology Center for calculating the critical position of control rods by means of the analysis of the measurements performed at the critical facility IPEN/MB-01. The lattice calculations were carried out with the WIMS/D4 code and for the global calculations the diffusion code SNAP-3D was used

Educational Technology Research in a VUCA World

Science.gov (United States)

Reeves, Thomas C.; Reeves, Patricia M.

2015-01-01

The status of educational technology research in a VUCA world is examined. The acronym, VUCA, stands for "Volatility" (rapidly changing contexts and conditions), "Uncertainty" (information missing that is critical to problem solving), "Complexity" (multiple factors difficult to categorize or control), and…

Understanding the End User Perspective: A Multiple-Case Study of Successful Health Information Technology Implementation

Science.gov (United States)

Behravesh, Bardia

2010-01-01

The United States continues to lag behind other countries in its adoption of health information technology. A failure to increase adoption will jeopardize the nation's ability to reduce medical errors, address the rapid growth of healthcare costs, and enact effective healthcare reform. Health information technology (HIT) implementation success…

Color coded multiple access scheme for bidirectional multiuser visible light communications in smart home technologies

Science.gov (United States)

Tiwari, Samrat Vikramaditya; Sewaiwar, Atul; Chung, Yeon-Ho

2015-10-01

In optical wireless communications, multiple channel transmission is an attractive solution to enhancing capacity and system performance. A new modulation scheme called color coded multiple access (CCMA) for bidirectional multiuser visible light communications (VLC) is presented for smart home applications. The proposed scheme uses red, green and blue (RGB) light emitting diodes (LED) for downlink and phosphor based white LED (P-LED) for uplink to establish a bidirectional VLC and also employs orthogonal codes to support multiple users and devices. The downlink transmission for data user devices and smart home devices is provided using red and green colors from the RGB LEDs, respectively, while uplink transmission from both types of devices is performed using the blue color from P-LEDs. Simulations are conducted to verify the performance of the proposed scheme. It is found that the proposed bidirectional multiuser scheme is efficient in terms of data rate and performance. In addition, since the proposed scheme uses RGB signals for downlink data transmission, it provides flicker-free illumination that would lend itself to multiuser VLC system for smart home applications.

HLA-A*01:03, HLA-A*24:02, HLA-B*08:01, HLA-B*27:05, HLA-B*35:01, HLA-B*44:02, and HLA-C*07:01 Monochain Transgenic/H-2 Class I Null Mice

DEFF Research Database (Denmark)

Boucherma, Rachid; Kridane-Miledi, Hédia; Bouziat, Romain

2013-01-01

We have generated a panel of transgenic mice expressing HLA-A*01:03, -A*24:02, -B*08:01, -B*27:05, -B*35:01, -B*44:02, or -C*07:01 as chimeric monochain molecules (i.e., appropriate HLA α1α2 H chain domains fused with a mouse α3 domain and covalently linked to human β2-microglobulin). Whereas...... a quantitative and qualitative restoration of the peripheral CD8(+) T cell repertoire, which exhibited a TCR diversity comparable with C57BL/6 WT mice. Potent epitope-specific, HLA-restricted, IFN-γ-producing CD8(+) T cell responses were generated against known reference T cell epitopes after either peptide...

The role of compatibility in the diffusion of technologies through social networks

NARCIS (Netherlands)

N.S. Immorlica (Nicole Simone); J. Kleinberg; M. Mahdian (Mohammad); T. Wexler; J.K. MacKie-Mason; P. Resnick

2007-01-01

textabstractIn many settings, competing technologies -- for example, operating systems, instant messenger systems, or document formats -- can be seen adopting a limited amount of compatibility with one another; in other words, the difficulty in using multiple technologies is balanced somewhere

T–CELL VACCINE PREPARATION FOR MULTIPLE SCLEROSIS TREATMENT

Directory of Open Access Journals (Sweden)

I. P. Ivanova

2005-01-01

Full Text Available Abstract. A two–stage technology of preparation of T–cell vaccine designated for multiple sclerosis treatment is described. At the first stage myelin–specific lymphocytes undergoe antigen–dependent cultural selection, whereas at the second stage they are grown by means of non–specific stimulation. The vaccine prepared in this way was found to induce specific anti–idiotypic immune response, directed against myelin–reactive T–lymphocytes. The results of 1–year follow–up of 18 vaccinated patients with a cerebral–spinal type of multiple sclerosis indicated the absence of side effects of T–cell vaccination, and suggest the possibility of effective application of this treatment within early stages of disease. (Med. Immunol., 2005, vol.7, № 1, pp 27532

First-Year Composition Teachers' Uses of New Media Technologies in the Composition Class

Science.gov (United States)

Mina, Lilian W.

2014-01-01

As new media technologies emerge and evolve rapidly, the need to make informed decisions about using these technologies in teaching writing increases. This dissertation research study aimed at achieving multiple purposes. The first purpose was to catalog the new media technologies writing teachers use in teaching first-year composition classes.…

Perceptions and Use of Technology to Support Older Adults with Multimorbidity.

Science.gov (United States)

Murphy, Emma; Doyle, Julie; Hannigan, Caoimhe; Smith, Suzanne; Kuiper, Janneke; Jacobs, An; Hoogerwerf, Evert-Jan; Desideri, Lorenzo; Fiordelmondo, Valentina; Maluccelli, Lorenza; Brady, Anne-Marie; Dinsmore, John

2017-01-01

Digital technologies hold great potential to improve and advance home based integrated care for older people living with multiple chronic health conditions. In this paper, we present the results of a user requirement study for a planned digital integrated care system, based on the experiences and needs of key stakeholders. We present rich, multi-stakeholder, qualitative data on the perceptions and use of technology among older people with multiple chronic health conditions and their key support actors. We have outlined our future work for the design of the system, which will involve continuous stakeholder engagement through a user-centred co-design method.

The systematic risk study in technology companies at Brazil

Directory of Open Access Journals (Sweden)

Marcio Marcelo Belli

2017-09-01

Full Text Available This work tested if brasilian technology companies has a greater systematic risk than traditional companies in Brazil. For to achieve tje purpose, two companies samples , one of technology companies and the other of traditional companies, were composed. The tecnique employed was a multiple regression analysis considering a dichotomous variable wich represents the technological factor and another numerical variable wich represents the intangibility degree of  companies. As a dependent variable was considered the CAPM systematic risk. The results indicated that technology companies have a greater systematic risk than traditional companies regardless of the degree of intangibility.

Capacity Expansion Modeling for Storage Technologies

Energy Technology Data Exchange (ETDEWEB)

Hale, Elaine; Stoll, Brady; Mai, Trieu

2017-04-03

The Resource Planning Model (RPM) is a capacity expansion model designed for regional power systems and high levels of renewable generation. Recent extensions capture value-stacking for storage technologies, including batteries and concentrating solar power with storage. After estimating per-unit capacity value and curtailment reduction potential, RPM co-optimizes investment decisions and reduced-form dispatch, accounting for planning reserves; energy value, including arbitrage and curtailment reduction; and three types of operating reserves. Multiple technology cost scenarios are analyzed to determine level of deployment in the Western Interconnection under various conditions.

Space Photovoltaic Research and Technology 1995

Science.gov (United States)

Landis, Geoffrey (Compiler)

1995-01-01

The Fourteenth Space Photovoltaic Research and Technology conference was held at the NASA Lewis Research Center from October 24-26, 1995. The abstracts presented in this volume report substantial progress in a variety of areas in space photovoltaics. Technical and review papers were presented in many areas, including high efficiency GaAs and InP solar cells, GaAs/Ge cells as commercial items, high efficiency multiple bandgap cells, solar cell and array technology, heteroepitaxial cells, thermophotovoltaic energy conversion, and space radiation effects. Space flight data on a variety of cells were also presented.

Content Area Vocabulary Videos in Multiple Contexts: A Pedagogical Tool

Science.gov (United States)

Webb, C. Lorraine; Kapavik, Robin Robinson

2015-01-01

The authors challenged pre-service teachers to digitally define a social studies or mathematical vocabulary term in multiple contexts using a digital video camera. The researchers sought to answer the following questions: 1. How will creating a video for instruction affect pre-service teachers' attitudes about teaching with technology, if at all?…

Technology development life cycle processes.

Energy Technology Data Exchange (ETDEWEB)

Beck, David Franklin

2013-05-01

This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81 of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.

Increasing Patient Engagement in Pharmacovigilance Through Online Community Outreach and Mobile Reporting Applications: An Analysis of Adverse Event Reporting for the Essure Device in the US.

Science.gov (United States)

Bahk, Chi Y; Goshgarian, Melanie; Donahue, Krystal; Freifeld, Clark C; Menone, Christopher M; Pierce, Carrie E; Rodriguez, Harold; Brownstein, John S; Furberg, Robert; Dasgupta, Nabarun

Preparing and submitting a voluntary adverse event (AE) report to the US Food and Drug Administration (FDA) for a medical device typically takes 40 min. User-friendly Web and mobile reporting apps may increase efficiency. Further, coupled with strategies for direct patient involvement, patient engagement in AE reporting may be improved. In 2012, the FDA Center for Devices and Radiologic Health (CDRH) launched a free, public mobile AE reporting app, MedWatcher, for patients and clinicians. During the same year, a patient community on Facebook adopted the app to submit reports involving a hysteroscopic sterilization device, brand name Essure ® . Patient community outreach was conducted to administrators of the group "Essure Problems" (approximately 18,000 members as of June 2015) to gather individual case safety reports (ICSRs). After agreeing on key reporting principles, group administrators encouraged members to report via the app. Semi-structured forms in the app mirrored fields of the MedWatch 3500 form. ICSRs were transmitted to CDRH via an electronic gateway, and anonymized versions were posted in the app. Data collected from May 11, 2013 to December 7, 2014 were analyzed. Narrative texts were coded by trained and certified MedDRA coders (version 17). Descriptive statistics and metrics, including VigiGrade completeness scores, were analyzed. Various incentives and motivations to report in the Facebook group were observed. The average Essure AE report took 11.4 min (±10) to complete. Submissions from 1349 women, average age 34 years, were analyzed. Serious events, including hospitalization, disability, and permanent damage after implantation, were reported by 1047 women (77.6 %). A total of 13,135 product-event pairs were reported, comprising 327 unique preferred terms, most frequently fatigue ( n  = 491), back pain (468), and pelvic pain (459). Important medical events (IMEs), most frequently mental impairment (142), device dislocation (108), and

Multiple dark matter scenarios from ubiquitous stringy throats

DEFF Research Database (Denmark)

Chialva, D.; Dev, P.S.B.; Mazumdar, A.

2013-01-01

We discuss the possibility of having multiple Kaluza-Klein dark matter candidates which arise naturally in generic type-IIB string theory compactification scenarios. These dark matter candidates reside in various throats of the Calabi-Yau manifold. In principle, they can come with a varied range......, we find that the mass scales allowed for the Kaluza-Klein dark matter particles in various throats can vary between 0.1 eV and 10 TeV, depending upon the throat geometry. Thus, there could be simultaneously more than one kind of cold (and possibly warm and hot) dark matter components residing...... in the Universe. This multiple dark matter scenario could weaken the bound on a conventional supersymmetric dark matter candidate and could also account for extra relativistic degrees of freedom in our Universe....

Terrestrial Micro Renewable Energy Applications of Space Technology

Science.gov (United States)

Komerath, N. M.; Komerath, P. P.

This paper explores the synergy between technologies intended for extraterrestrial in situ resource utilization and those for terrestrial mass-market micro renewable power generation systems. The case for a micro renewable energy architecture is presented. The obstacles hindering market success are summarized, along with opportunities from recent demonstrations suggesting that the public appetite for sophisticated technology worldwide may be underappreciated by technical researchers. Technical innovations from space research are summarized along with estimates of possible conversion efficiencies. It is argued that the cost-effectiveness of micro power generation must be viewed through the value of the first few watts of available power, rather than the marginal cost per kilowatt-hour of electric power from utility power grids. This leads to the finding that the actual target cost per unit power, and efficiency, are well within reach of space technology products. Hybrid systems integrating power extraction from multiple resources, and adaptable for multiple applications, can break through mass market price barriers. Recent work to develop learning resources and test beds as part of a Micro Renewable Energy Laboratory is summarized.

Practical Packaging Technology for Microfluidic Systems

International Nuclear Information System (INIS)

Lee, Hwan Yong; Han, Song I; Han, Ki Ho

2010-01-01

This paper presents the technology for the design, fabrication, and characterization of a microfluidic system interface (MSI): the purpose of this technology is to enable the integration of complex microfluidic systems. The MSI technology can be applied in a simple manner for realizing complex arrangements of microfluidic interconnects, integrated microvalves for fluid control, and optical windows for on-chip optical processes. A microfluidic system for the preparation of genetic samples was used as the test vehicle to prove the effectiveness of the MSI technology for packaging complex microfluidic systems with multiple functionalities. The miniaturized genetic sample preparation system comprised several functional compartments, including compartments for cell purification, cell separation, cell lysis, solid-phase DNA extraction, polymerase chain reaction, and capillary electrophoresis. Additionally, the functional operation of the solid-phase extraction and PCR thermocycling compartments was demonstrated by using the MSI

Multiple purpose research complex on the basis of electron accelerators and terahertz free electron laser

International Nuclear Information System (INIS)

Kulipanov, G.N.

2009-01-01

In this report the basic positioning parameters of multiple purpose research complex are presented, the list of potential experiments and technological uses on the example of results received in the multiuser center of G.I. Budker Institut of nuclear physics Siberian department of the Russian Academy of Sciences is discussed. This research complex is directed on work in the big universities and nano technology centers. Electron accelerators is intended for development of electron-beam technologies different material modification, for production of nano powder, nano materials and solution of ecological tasks. In this work the project of multiple purpose research complex on the basis of new generation electron accelerator Il-14 and workable terahertz free electron laser is suggested. Terahertz free electron laser will be used for researches in the sphere of physics and chemistry, biology and medicine, nanotechnology engineering and different methods of nanodiagnostics.

Neural correlates of alerting and orienting impairment in multiple sclerosis patients.

Directory of Open Access Journals (Sweden)

Manuel Vázquez-Marrufo

Full Text Available BACKGROUND: A considerable percentage of multiple sclerosis patients have attentional impairment, but understanding its neurophysiological basis remains a challenge. The Attention Network Test allows 3 attentional networks to be studied. Previous behavioural studies using this test have shown that the alerting network is impaired in multiple sclerosis. The aim of this study was to identify neurophysiological indexes of the attention impairment in relapsing-remitting multiple sclerosis patients using this test. RESULTS: After general slowing had been removed in patients group to isolate the effects of each condition, some behavioral differences between them were obtained. About Contingent Negative Variation, a statistically significant decrement were found in the amplitude for Central and Spatial Cue Conditions for patient group (p<0.05. ANOVAs showed for the patient group a significant latency delay for P1 and N1 components (p<0.05 and a decrease of P3 amplitude for congruent and incongruent stimuli (p<0.01. With regard to correlation analysis, PASAT-3s and SDMT showed significant correlations with behavioral measures of the Attention Network Test (p<0.01 and an ERP parameter (CNV amplitude. CONCLUSIONS: Behavioral data are highly correlated with the neuropsychological scores and show that the alerting and orienting mechanisms in the patient group were impaired. Reduced amplitude for the Contingent Negative Variation in the patient group suggests that this component could be a physiological marker related to the alerting and orienting impairment in relapsing-remitting multiple sclerosis. P1 and N1 delayed latencies are evidence of the demyelination process that causes impairment in the first steps of the visual sensory processing. Lastly, P3 amplitude shows a general decrease for the pathological group probably indexing a more central impairment. These results suggest that the Attention Network Test give evidence of multiple levels of attention

Glogsters and Other Motivating Technology: A Multiple Case Study of English Learners

Science.gov (United States)

Martinez-Alba, Gilda; Cruzado-Guerrero, Judith; Pitcher, Sharon

2014-01-01

The purpose of this study was to investigate how undergraduate Latino English learner (EL) students were motivated to read using technology by their teachers throughout their education. To examine this, they were interviewed, asked to perform a task that involved reading online, required to make a Glogster (an online interactive poster) about…

Innovations in Balloon Catheter Technology in Rhinology.

Science.gov (United States)

D'Anza, Brian; Sindwani, Raj; Woodard, Troy D

2017-06-01

Since being introduced more than 10 years ago, balloon catheter technology (BCT) has undergone several generations of innovations. From construction to utilization, there has been a myriad of advancements in balloon technology. The ergonomics of the balloon dilation systems have improved with a focus on limiting the extra assembly. "Hybrid" BCT procedures have shown promise in mucosal preservation, including treating isolated complex frontal disease. Multiple randomized clinical trials report improved long-term outcomes in stand-alone BCT, including in-office use. The ever-expanding technological innovations ensure BCT will be a key component in the armamentarium of the modern sinus surgeon. Copyright © 2017 Elsevier Inc. All rights reserved.

Implementing a routine outcome assessment procedure to evaluate the quality of assistive technology service delivery for children with physical or multiple disabilities: Perceived effectiveness, social cost, and user satisfaction.

Science.gov (United States)

Desideri, Lorenzo; Bizzarri, Martina; Bitelli, Claudio; Roentgen, Uta; Gelderblom, Gert-Jan; de Witte, Luc

2016-01-01

There is a lack of evidence on the effects and quality of assistive technology service delivery (ATSD). This study presents a quasi-experimental 3-months follow-up using a pre-test/post-test design aimed at evaluating outcomes of assistive technology (AT) interventions targeting children with physical and multiple disabilities. A secondary aim was to evaluate the feasibility of the follow-up assessment adopted in this study with a view to implement the procedure in routine clinical practice. Forty-five children aged 3-17 years were included. Parents were asked to complete the Individual Prioritised Problem Assessment (IPPA) for AT effectiveness; KWAZO (Kwaliteit van Zorg [Quality of Care]) and Quebec User Evaluation of Satisfaction with Assistive Technology (QUEST) 2.0 for satisfaction with ATSD; Siva Cost Analysis Instrument (SCAI) for estimating the social cost of AT interventions. At follow-up, 25 children used the AT recommended. IPPA effect sizes ranged from 1.4 to 0.7, showing a large effect of AT interventions. Overall, parents were satisfied with ATSD, but Maintenance, Professional Services, and AT Delivery were rated not satisfactory. SCAI showed more resources spent for AT intervention compared to human assistance without technological supports. AT may be an effective intervention for children with disabilities. Issues concerning responsiveness and feasibility of the IPPA and the SCAI instruments are discussed with a view to inform routine clinical practice.

Findings of Optical Coherence Tomography of Retinal Nerve Fiber Layer in Two Common Types of Multiple Sclerosis

Directory of Open Access Journals (Sweden)

Gholamali Yousefipour

2016-06-01

Full Text Available Multiple sclerosis (MS is the most prevalent disease caused by the inflammatory demyelinating process that causes progressive nervous system degeneration over the time. Optical Coherence Tomography (OCT is a non-invasive optical imaging technology, which can measure the thickness of retinal nerve fiber layer as well as the diameter of the macula. The purpose of the study is evaluation OCT findings in two common types of multiple sclerosis. For doing the cross-sectional study, 63 patients with two prevalent types of multiple sclerosis (35 patients with Relapse Remitting Multiple Sclerosis (RRMS and 28 patients with Secondary Progressive Multiple Sclerosis (SPMS were evaluated for 6 months. Exclusion criteria of the study were a history of optic neuritis, suffering from diabetes mellitus, hypertension, ocular disease, and the presence of other neurologic degenerative diseases. Then, the thickness of retinal nerve fiber layer (RNFL, as well as thickness and volume of the macula, were measured in the patients using OCT technology. The disability rate of patients was evaluated according to Expanded Disability Status Scale (EDSS. Finally, data was analyzed by means of SPSS software. Overall, 35 patients with RRMS (with mean age of 32.37+10.01, average disease period of 3.81+3.42 and mean EDSS of 1.84+0.45 and 28 patients with SPMS (with mean age of 39.21+9.33, average disease period of 11.32+5.87 and mean EDSS of 5.12+1.46 were assessed and compared in terms of retinal nerve fiber layer and size and thickness of macula. In all of these sections, the thicknesses were smaller in SPMS patients than patients with RRMS. But, there was a significant difference in total thickness (81.82µm versus 96.03µm with P=0.04 and thickness of temporal sector (54.5 µm versus 69.34 µm with P=0.04 of retinal nerve fiber layer and macular size at the superior sector of external ring (1.48 mm³ versus 1.58 mm³ with P=0.03, and nasal sector of external ring surrounding

NASA/ESTO investments in remote sensing technologies (Conference Presentation)

Science.gov (United States)

Babu, Sachidananda R.

2017-02-01

For more then 18 years NASA Earth Science Technology Office has been investing in remote sensing technologies. During this period ESTO has invested in more then 900 tasks. These tasks are managed under multiple programs like Instrument Incubator Program (IIP), Advanced Component Technology (ACT), Advanced Information Systems Technology (AIST), In-Space Validation of Earth Science Technologies (InVEST), Sustainable Land Imaging - Technology (SLI-T) and others. This covers the whole spectrum of technologies from component to full up satellite in space and software. Over the years many of these technologies have been infused into space missions like Aquarius, SMAP, CYGNSS, SWOT, TEMPO and others. Over the years ESTO is actively investing in Infrared sensor technologies for space applications. Recent investments have been for SLI-T and InVEST program. On these tasks technology development is from simple Bolometers to Advanced Photonic waveguide based spectrometers. Some of the details on these missions and technologies will be presented.

ESTO Investments in Innovative Sensor Technologies for Remote Sensing

Science.gov (United States)

Babu, Sachidananda R.

2017-01-01

For more then 18 years NASA Earth Science Technology Office has been investing in remote sensing technologies. During this period ESTO has invested in more then 900 tasks. These tasks are managed under multiple programs like Instrument Incubator Program (IIP), Advanced Component Technology (ACT), Advanced Information Systems Technology (AIST), In-Space Validation of Earth Science Technologies (InVEST), Sustainable Land Imaging - Technology (SLI-T) and others. This covers the whole spectrum of technologies from component to full up satellite in space and software. Over the years many of these technologies have been infused into space missions like Aquarius, SMAP, CYGNSS, SWOT, TEMPO and others. Over the years ESTO is actively investing in Infrared sensor technologies for space applications. Recent investments have been for SLI-T and InVEST program. On these tasks technology development is from simple Bolometers to Advanced Photonic waveguide based spectrometers. Some of the details on these missions and technologies will be presented.

Radiation effects in advanced microelectronics technologies

Science.gov (United States)

Johnston, A. H.

1998-06-01

The pace of device scaling has increased rapidly in recent years. Experimental CMOS devices have been produced with feature sizes below 0.1 /spl mu/m, demonstrating that devices with feature sizes between 0.1 and 0.25 /spl mu/m will likely be available in mainstream technologies after the year 2000. This paper discusses how the anticipated changes in device dimensions and design are likely to affect their radiation response in space environments. Traditional problems, such as total dose effects, SEU and latchup are discussed, along with new phenomena. The latter include hard errors from heavy ions (microdose and gate-rupture errors), and complex failure modes related to advanced circuit architecture. The main focus of the paper is on commercial devices, which are displacing hardened device technologies in many space applications. However, the impact of device scaling on hardened devices is also discussed.

State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies

DEFF Research Database (Denmark)

Hofstätter, Thomas; Pedersen, David Bue; Tosello, Guido

2017-01-01

Additive manufacturing technologies have received a lot of attention in recent years for their use in multiple materials such as metals, ceramics, and polymers. The aim of this review article is to analyze the technology of fiber-reinforced polymers and its implementation with additive...... manufacturing. This article reviews recent developments, ideas, and state-of-the-art technologies in this field. Moreover, it gives an overview of the materials currently available for fiber-reinforced material technology....

The dual role of multiple-transistor charge sharing collection in single-event transients

International Nuclear Information System (INIS)

Guo Yang; Chen Jian-Jun; He Yi-Bai; Liang Bin; Liu Bi-Wei

2013-01-01

As technologies scale down in size, multiple-transistors being affected by a single ion has become a universal phenomenon, and some new effects are present in single event transients (SETs) due to the charge sharing collection of the adjacent multiple-transistors. In this paper, not only the off-state p-channel metal—oxide semiconductor field-effect transistor (PMOS FET), but also the on-state PMOS is struck by a heavy-ion in the two-transistor inverter chain, due to the charge sharing collection and the electrical interaction. The SET induced by striking the off-state PMOS is efficiently mitigated by the pulse quenching effect, but the SET induced by striking the on-state PMOS becomes dominant. It is indicated in this study that in the advanced technologies, the SET will no longer just be induced by an ion striking the off-state transistor, and the SET sensitive region will no longer just surround the off-state transistor either, as it is in the older technologies. We also discuss this issue in a three-transistor inverter in depth, and the study illustrates that the three-transistor inverter is still a better replacement for spaceborne integrated circuit design in advanced technologies. (condensed matter: structural, mechanical, and thermal properties)

Construction of a food-grade multiple-copy integration system for Lactococcus lactis

NARCIS (Netherlands)

Leenhouts, K.; Bolhuis, A.; Venema, G.; Kok, J.

A food-grade vector system was developed that allows stable integration of multiple plasmid copies in the chromosome of Lactococcus lactis. The vector consists of the plus origin of replication (Ori(+)) of the lactococcal plasmid pWV01, the sucrose genes of the lactic acid bacterium Pediococcus

31 CFR 545.505 - Importation of goods, software, or technology exported from the territory of Afghanistan...

Science.gov (United States)

2010-07-01

... applicant submits proof satisfactory to the U.S. Customs Service that the goods, software, or technology... satisfactory to the U.S. Customs Service of the location of goods, software, or technology outside the... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Importation of goods, software, or...

Emergent technologies, networks that lurks the sociability

Directory of Open Access Journals (Sweden)

Luis Gregorio Iglesias Sahagún

2018-05-01

Full Text Available This paper highlights several symptoms that can be observed in multiple societies since the installation of so called “emergent technologies”, especially technologies of information and communication. Supported on the idea that this technological capacity provokes an alteration of the culture, which becomes a connectionist neo-capitalism, we suggest that besides the constriction of the “field of the possible” produced by the system of a central market economy, the appliances and technological devices – the portable ones particularly-, exerts a new constriction and, actually, re-organization, of this “field of the possible”“. We find this as disturbing signs of loss of autonomy, such as a reduction in margins for the exercise of autonomy by individuals and collectivities. We will argue that the situation becomes sophisticated in societies with a high installed capacity of communication, information and transportation technologies. In such societies, in fact, reticular forms are lavished in multiple areas: production, provision of services (shared economy, neighborhood, school, university, etc. No doubt “the network” is the metaphor that best conveys much of what happens and the ways it happens in our daily lives. Starting from a conception of sociability, understood as the form that concurrences can adopt, the form of “doing something together”, the forms of “putting something in common”, the forms of “doing about that something put in common “, we hypothesized that with emergent technologies and social reticulation, a vector of centrifugal component that blocks, hinders or inhibits sociability has also been set in motion.

Benefits and risks of smart home technologies

International Nuclear Information System (INIS)

Wilson, Charlie; Hargreaves, Tom; Hauxwell-Baldwin, Richard

2017-01-01

Smart homes are a priority area of strategic energy planning and national policy. The market adoption of smart home technologies (SHTs) relies on prospective users perceiving clear benefits with acceptable levels of risk. This paper characterises the perceived benefits and risks of SHTs from multiple perspectives. A representative national survey of UK homeowners (n=1025) finds prospective users have positive perceptions of the multiple functionality of SHTs including energy management. Ceding autonomy and independence in the home for increased technological control are the main perceived risks. An additional survey of actual SHT users (n=42) participating in a smart home field trial identifies the key role of early adopters in lowering perceived SHT risks for the mass market. Content analysis of SHT marketing material (n=62) finds the SHT industry are insufficiently emphasising measures to build consumer confidence on data security and privacy. Policymakers can play an important role in mitigating perceived risks, and supporting the energy-management potential of a smart-home future. Policy measures to support SHT market development include design and operating standards, guidelines on data and privacy, quality control, and in situ research programmes. Policy experiences with domestic energy efficiency technologies and with national smart meter roll-outs offer useful precedents. - Highlights: • Representative national survey of prospective smart home users. • Comparative analysis of three datasets to analyse perceived benefits and risks of smart home technologies. • Distinctive characteristics identified of early adopters who seed market growth. • Comparison of user perceptions with industry marketing. • Detailed policy recommendations to support energy benefits of smart home technologies.

Simulation of neutron multiplicity measurements using Geant4. Open source software for nuclear arms control

Energy Technology Data Exchange (ETDEWEB)

Kuett, Moritz

2016-07-07

Nuclear arms control, including nuclear safeguards and verification technologies for nuclear disarmament typically use software as part of many different technological applications. This thesis proposes to use three open source criteria for such software, allowing users and developers to have free access to a program, have access to the full source code and be able to publish modifications for the program. This proposition is presented and analyzed in detail, together with the description of the development of ''Open Neutron Multiplicity Simulation'', an open source software tool to simulate neutron multiplicity measurements. The description includes physical background of the method, details of the developed program and a comprehensive set of validation calculations.

Multiple optical code-label processing using multi-wavelength frequency comb generator and multi-port optical spectrum synthesizer.

Science.gov (United States)

Moritsuka, Fumi; Wada, Naoya; Sakamoto, Takahide; Kawanishi, Tetsuya; Komai, Yuki; Anzai, Shimako; Izutsu, Masayuki; Kodate, Kashiko

2007-06-11

In optical packet switching (OPS) and optical code division multiple access (OCDMA) systems, label generation and processing are key technologies. Recently, several label processors have been proposed and demonstrated. However, in order to recognize N different labels, N separate devices are required. Here, we propose and experimentally demonstrate a large-scale, multiple optical code (OC)-label generation and processing technology based on multi-port, a fully tunable optical spectrum synthesizer (OSS) and a multi-wavelength electro-optic frequency comb generator. The OSS can generate 80 different OC-labels simultaneously and can perform 80-parallel matched filtering. We also demonstrated its application to OCDMA.

46 CFR 1.01-30 - Judicial review.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Judicial review. 1.01-30 Section 1.01-30 Shipping COAST... Judicial review. (a) Nothing in this chapter shall be construed to prohibit any party from seeking judicial review of any Commandant's decision or action taken pursuant to the regulations in this part or part 5 of...

40 CFR 86.1805-01 - Useful life.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Useful life. 86.1805-01 Section 86... Complete Otto-Cycle Heavy-Duty Vehicles § 86.1805-01 Useful life. (a) For light-duty vehicles and light-duty trucks, intermediate useful life is a period of use of 5 years or 50,000 miles, whichever occurs...

Status of molten carbonate fuel cell technology development

Science.gov (United States)

Parsons, E. L., Jr.; Williams, M. C.; George, T. J.

The MCFC technology has been identified by the DOE as a promising product for commercialization. Development of the MCFC technology supports the National Energy Strategy. Review of the status of the MCFC technology indicates that the MCFC technology developers are making rapid and significant progress. Manufacturing facility development and extensive testing is occurring. Improvements in performance (power density), lower costs, improved packaging, and scale up to full height are planned. MCFC developers need to continue to be responsive to end-users in potential markets. It will be market demands for the correct product definition which will ultimately determine the character of MCFC power plants. There is a need for continued MCFC product improvement and multiple product development tests.

Technology Trends and Opportunities for Construction Industry and Lifecycle Management

OpenAIRE

Janson, Vidar

2017-01-01

Master's thesis in for Offshore Technology: Industrial Asset Management The purpose of the report is to highlight methods that can make it easier for the construction industry and industry in general to benefit from new technology. The report is intended as a reference to technological solutions that along with some techniques, can streamline workflow for multiple tasks in planning, design, and operation and maintenance management. The problems focused on is how to: • Simplify the procu...

Morphological characteristics associated with rupture risk of multiple intracranial aneurysms.

Science.gov (United States)

Wang, Guang-Xian; Liu, Lan-Lan; Wen, Li; Cao, Yun-Xing; Pei, Yu-Chun; Zhang, Dong

2017-10-01

To identify the morphological parameters that are related to intracranial aneurysms (IAs) rupture using a case-control model. A total of 107 patients with multiple IAs and aneurysmal subarachnoid hemorrhage between August 2011 and February 2017 were enrolled in this study. Characteristics of IAs location, shape, neck width, perpendicular height, depth, maximum size, flow angle, parent vessel diameter (PVD), aspect ratio (AR) and size ratio (SR) were evaluated using CT angiography. Multiple logistic regression analysis was used to identify the independent risk factors associated with IAs rupture. Receiver operating characteristic curve analysis was performed on the final model, and the optimal thresholds were obtained. IAs located in the internal carotid artery (ICA) was associated with a negative risk of rupture, whereas AR, SR1 (height/PVD) and SR2 (depth/PVD) were associated with increased risk of rupture. When SR was calculated differently, the odds ratio values of these factors were also different. The receiver operating characteristic curve showed that AR, SR1 and SR2 had cut-off values of 1.01, 1.48 and 1.40, respectively. SR3 (maximum size/PVD) was not associated with IAs rupture. IAs located in the ICA are associated with a negative risk of rupture, while high AR (>1.01), SR1 (>1.48) or SR2 (>1.40) are risk factors for multiple IAs rupture. Copyright © 2017 Hainan Medical University. Production and hosting by Elsevier B.V. All rights reserved.

Global power knowledge science and technology in international affairs

CERN Document Server

Barth, Kai-Henrik

2006-01-01

Osiris annualy examines a particular topic in the history of science, bringing together experts in the field to consider multiple aspects of the time period, episode, or theme. Volume 21, Historical Perspectives on Science, Technology, and International Affairs, explores the ways in which scientists and issues in science and technology have played significant roles in foreign policy and international relations, especially since the Second World War.

Automatd assessment of the state of central hemodynamics using a radiocardioanalyser RCA 3-01

International Nuclear Information System (INIS)

Sivachenko, T.P.; Zozulya, A.A.; Sribnaya, A.F.; Ratmanskij, A.Yu.; Tishchenko, F.M.; Kurenya, A.G.; Krupka, I.N.; Kulagin, S.N.; Protsenko, A.S.

1987-01-01

The authors presented the results of a clinical use of a new radiocardioanalyzer RCA 3-01 (manufactured in the USSR) providing for automated measurements and computations of indices of the central hemodynamics during studies using a method of dilution of radioactive nuclides. The main technical potentialities of the device designed on the basis of microprocessor technology, were described. The authors also provided the results of automated computation of the circulating blood volume and the main hemodynamic indices in a group of patients. Values of the hemodynamic indices were shown to correspond to actual ones and comparable to control ones and clinical evidence. The comparison of automated processing with a manual method of calculation indicated a significant coincidence of index values. The clinical use of the radiocardioanalyzer RGA 3-01 for automated assessment of the indices of the cardiovascular system was shown to hold promise among various groups of patients

Using ISS to develop telescope technology

Science.gov (United States)

Saenz-Otero, Alvar; Miller, David W.

2005-08-01

Future space telescope missions concepts have introduced new technologies such as precision formation flight, optical metrology, and segmented mirrors. These new technologies require demonstration and validation prior to deployment in final missions such as the James Webb Space Telescope, Terrestrial Planet Finder, and Darwin. Ground based demonstrations do not provide the precision necessary to obtain a high level of confidence in the technology; precursor free flyer space missions suffer from the same problems as the final missions. Therefore, this paper proposes the use of the International Space Station as an intermediate research environment where these technologies can be developed, demonstrated, and validated. The ISS provides special resources, such as human presence, communications, power, and a benign atmosphere which directly reduce the major challenges of space technology maturation: risk, complexity, cost, remote operations, and visibility. Successful design of experiments for use aboard the space station, by enabling iterative research and supporting multiple scientists, can further reduce the effects of these challenges of space technology maturation. This paper presents results of five previous MIT Space Systems Laboratory experiments aboard the Space Shuttle, MIR, and the ISS to illustrate successful technology maturation aboard these facilities.

Awarensss and utilization of information technology among ...

African Journals Online (AJOL)

The paper examines the awareness and utilization of Information Technologies among Agricultural scientists in Nigeria. Data were collected from 170 respondents with the aid of structured questionnaire and analysed using frequency, percentage, mean and Ordinary Least Square multiple regression. This study found that ...

Inkjet printing-based volumetric display projecting multiple full-colour 2D patterns

Science.gov (United States)

Hirayama, Ryuji; Suzuki, Tomotaka; Shimobaba, Tomoyoshi; Shiraki, Atsushi; Naruse, Makoto; Nakayama, Hirotaka; Kakue, Takashi; Ito, Tomoyoshi

2017-04-01

In this study, a method to construct a full-colour volumetric display is presented using a commercially available inkjet printer. Photoreactive luminescence materials are minutely and automatically printed as the volume elements, and volumetric displays are constructed with high resolution using easy-to-fabricate means that exploit inkjet printing technologies. The results experimentally demonstrate the first prototype of an inkjet printing-based volumetric display composed of multiple layers of transparent films that yield a full-colour three-dimensional (3D) image. Moreover, we propose a design algorithm with 3D structures that provide multiple different 2D full-colour patterns when viewed from different directions and experimentally demonstrate prototypes. It is considered that these types of 3D volumetric structures and their fabrication methods based on widely deployed existing printing technologies can be utilised as novel information display devices and systems, including digital signage, media art, entertainment and security.

Pilot Trial of a Social Cognitive Theory-Based Physical Activity Intervention Delivered by Nonsupervised Technology in Persons With Multiple Sclerosis.

Science.gov (United States)

Suh, Yoojin; Motl, Robert W; Olsen, Connor; Joshi, Ina

2015-07-01

Physical inactivity is prevalent in people with multiple sclerosis (MS) and this highlights the importance of developing behavioral interventions for increasing physical activity (PA) in MS. This pilot trial examined the efficacy of a 6-week, behavioral intervention based on social cognitive theory (SCT) delivered by newsletters and phone calls for increasing PA in persons with MS who were physically inactive and had middle levels of self-efficacy. The sample included 68 persons with relapsing-remitting MS who were randomly assigned into intervention and control groups. The intervention group received SCT-based information by newsletters and phone calls, whereas the controls received information regarding topics such as stress management over 6 weeks. Participants completed self-report of PA and social cognitive variables. The intervention group had a significant increase in self-reported PA (d = 0.56, P = .02) over the 6 weeks, but the controls had a nonsignificant change (d = -0.13, P = .45). Goal setting was changed in the intervention group (d = 0.68, P ≤ .01) and identified as a significant mediator of change in self-reported PA. This study provides initial evidence for the benefit of a theory-based behavioral intervention for increasing PA in MS.

JTEL Winter School for Advanced Technologically Enhanced Learning

NARCIS (Netherlands)

Glahn, Christian; Gruber, Marion

2010-01-01

Glahn, C., & Gruber, M. (2010). JTEL Winter School for Advanced Technologically Enhanced Learning. In ~mail. Das Magazin des Tiroler Bildungsinstituts, 01/10, März (p. 3-4). Innsbruck: Grillhof, Medienzentrum.

Participatory Design & Health Information Technology

DEFF Research Database (Denmark)

Health Information Technology (HIT) continues to increase in importance as a component of healthcare provision, but designing HIT is complex. The creation of cooperative learning processes for future HIT users is not a simple task. The importance of engaging end users such as health professionals......, in collaboration with a wide range of people, a broad repertoire of methods and techniques to apply PD within multiple domains has been established. This book, Participatory Design & Health Information Technology, presents the contributions of researchers from 5 countries, who share their experience and insights......, patients and relatives in the design process is widely acknowledged, and Participatory Design (PD) is the primary discipline for directly involving people in the technological design process. Exploring the application of PD in HIT is crucial to all those involved in engaging end users in HIT design and...

Microscale technologies for cell engineering

CERN Document Server

Gaharwar, Akhilesh

2016-01-01

This book offers readers cutting-edge research at the interface of polymer science and engineering, biomedical engineering, materials science, and biology. State-of-the-art developments in microscale technologies for cell engineering applications are covered, including technologies relevant to both pluripotent and adult stem cells, the immune system, and somatic cells of the animal and human origin. This book bridges the gap in the understanding of engineering biology at multiple length scale, including microenvironmental control, bioprocessing, and tissue engineering in the areas of cardiac, cartilage, skeletal, and vascular tissues, among others. This book also discusses unique, emerging areas of micropatterning and three-dimensional printing models of cellular engineering, and contributes to the better understanding of the role of biophysical factors in determining the cell fate. Microscale Technologies for Cell Engineering is valuable for bioengineers, biomaterial scientists, tissue engineers, clinicians,...

46 CFR 44.01-13 - Heavy weather plan.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Heavy weather plan. 44.01-13 Section 44.01-13 Shipping... VOYAGES Administration § 44.01-13 Heavy weather plan. (a) Each heavy weather plan under § 44.01-12(b) must... Inspection. Approval of a heavy weather plan is limited to the current hurricane season. (b) The cognizant...

29 CFR 2520.101-2 - Annual reporting by multiple employer welfare arrangements and certain other entities offering or...

Science.gov (United States)

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Annual reporting by multiple employer welfare arrangements and certain other entities offering or providing coverage for medical care to the employees of two or more employers. 2520.101-2 Section 2520.101-2 Labor Regulations Relating to Labor (Continued) EMPLOYEE...

Integration of Smart Grid Technologies in Households

DEFF Research Database (Denmark)

Friis, Freja; Gram-Hanssen, Kirsten

2013-01-01

This article considers the interplay between new smart grid technologies and households everyday practices. The research focuses on how Electric Vehicles (EVs) and Dynamic Pricing influence on Danish households’ everyday life and how these technologies constitutes and change routines and practice...... to a more complex and multiple consideration of the interplay between households’ social practices and new smart grid technologies - and thereby helps to fill out the lack of research on the integration of peak-shaving technologies in the end-user design.......This article considers the interplay between new smart grid technologies and households everyday practices. The research focuses on how Electric Vehicles (EVs) and Dynamic Pricing influence on Danish households’ everyday life and how these technologies constitutes and change routines and practices......, is analysed from the analytical concept offered by the Social Practice Theory. Overall, the case-study demonstrates that the smart grid technologies influence the ‘way of driving’ and changed the temporal patterns of consumption in the families during the test-period. The inquiry attempts to contribute...

Multiple-Zone Diffractive Optic Element for Laser Ranging Applications

Science.gov (United States)

Ramos-Izquierdo, Luis A.

2011-01-01

A diffractive optic element (DOE) can be used as a beam splitter to generate multiple laser beams from a single input laser beam. This technology has been recently used in LRO s Lunar Orbiter Laser Altimeter (LOLA) instrument to generate five laser beams that measure the lunar topography from a 50-km nominal mapping orbit (see figure). An extension of this approach is to use a multiple-zone DOE to allow a laser altimeter instrument to operate over a wider range of distances. In particular, a multiple-zone DOE could be used for applications that require both mapping and landing on a planetary body. In this case, the laser altimeter operating range would need to extend from several hundred kilometers down to a few meters. The innovator was recently involved in an investigation how to modify the LOLA instrument for the OSIRIS asteroid mapping and sample return mission. One approach is to replace the DOE in the LOLA laser beam expander assembly with a multiple-zone DOE that would allow for the simultaneous illumination of the asteroid with mapping and landing laser beams. The proposed OSIRIS multiple-zone DOE would generate the same LOLA five-beam output pattern for high-altitude topographic mapping, but would simultaneously generate a wide divergence angle beam using a small portion of the total laser energy for the approach and landing portion of the mission. Only a few percent of the total laser energy is required for approach and landing operations as the return signal increases as the inverse square of the ranging height. A wide divergence beam could be implemented by making the center of the DOE a diffractive or refractive negative lens. The beam energy and beam divergence characteristics of a multiple-zone DOE could be easily tailored to meet the requirements of other missions that require laser ranging data. Current single-zone DOE lithographic manufacturing techniques could also be used to fabricate a multiple-zone DOE by masking the different DOE zones during

Current meter - direction and other data from FIXED PLATFORMS in support of the Brine Disposal project from 1979-10-01 to 1980-01-01 (NODC Accession 8000049)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Current meter - direction and other data were collected from FIXED PLATFORMS from 01 October 1979 to 01 January 1980. Data were collected by the National Data Buoy...

Script of Healthcare Technology: Do Designs of Robotic Beds Exclude or Include Users?

DEFF Research Database (Denmark)

Brodersen, Søsser Grith Kragh; Hansen, Meiken; Lindegaard, Hanne

2015-01-01

Many new product designs are currently being implemented in the healthcare sector, and this presents designers with challenges involved in socially innovative design. In this paper, we argue that designing assistive technologies requires focus on multiple users and use practices. We see the design...... of assistive technologies as design of socio-material assemblies , which include an analysis of the products already used in relation to multiple users, their practices and wishes. In the article we focus on the challenges in the implementation of two types of robotic beds used for disability care...

Multiple NEO Rendezvous Using Solar Sail Propulsion

Science.gov (United States)

Johnson, Les; Alexander, Leslie; Fabisinski, Leo; Heaton, Andy; Miernik, Janie; Stough, Rob; Wright, Roosevelt; Young, Roy

2012-01-01

The NASA Marshall Space Flight Center (MSFC) Advanced Concepts Office performed an assessment of the feasibility of using a near-term solar sail propulsion system to enable a single spacecraft to perform serial rendezvous operations at multiple Near Earth Objects (NEOs) within six years of launch on a small-to-moderate launch vehicle. The study baselined the use of the sail technology demonstrated in the mid-2000 s by the NASA In-Space Propulsion Technology Project and is scheduled to be demonstrated in space by 2014 as part of the NASA Technology Demonstration Mission Program. The study ground rules required that the solar sail be the only new technology on the flight; all other spacecraft systems and instruments must have had previous space test and qualification. The resulting mission concept uses an 80-m X 80-m 3-axis stabilized solar sail launched by an Athena-II rocket in 2017 to rendezvous with 1999 AO10, Apophis and 2001 QJ142. In each rendezvous, the spacecraft will perform proximity operations for approximately 30 days. The spacecraft science payload is simple and lightweight; it will consist of only the multispectral imager flown on the Near Earth Asteroid Rendezvous (NEAR) mission to 433 Eros and 253 Mathilde. Most non-sail spacecraft systems are based on the Messenger mission spacecraft. This paper will describe the objectives of the proposed mission, the solar sail technology to be employed, the spacecraft system and subsystems, as well as the overall mission profile.

Learning from Fiction: Applications in Emerging Technologies

Science.gov (United States)

Gordon, Ruthanna

2009-01-01

Understanding the development of public opinion about emerging technologies, when the scope of that emergence is still speculative, poses particular challenges. Opinions and beliefs may be drawn from conflicting experts in multiple fields, media portrayals with varying biases, and fictional narratives that portray diverse possible futures. This…

Identification of multiple intelligences for high school students in theoretical and applied science courses

Science.gov (United States)

Wiseman, D. Kim

Historically educators in the United States have used the Stanford-Binet intelligence test to measure a students' ability in logical/mathematical and linguistic domains. This measurement is being used by a society that has evolved from agrarian and industrial-based economies to what is presently labeled a technological society. As society has changed so have the educational needs of the students who will live in this technological society. This study assessed the multiple intelligences of high school students enrolled in theoretical and applied science (physics and applied physics) courses. Studies have verified that performance and outcomes of students enrolled in these courses are similar in standardized testing but instructional methodology and processes are dissimilar. Analysis of multiple intelligence profiles collected from this study found significant differences in logical/mathematical, bodily/kinesthetic and intrapersonal multiple intelligences of students in theoretical science courses compared to students in applied science courses. Those differences clearly illustrate why it is imperative for educators to expand the definition of intelligence for students entering the new millennium.

Using Science Driven Technologies for the Defense and Security Applications

Science.gov (United States)

Habib, Shahid; Zukor, Dorthy; Ambrose, Stephen D.

2004-01-01

For the past three decades, Earth science remote sensing technologies have been providing enormous amounts of useful data and information in broadening our understanding of our home planet as a system. This research, as it has expanded our learning process, has also generated additional questions. This has further resulted in establishing new science requirements, which have culminated in defining and pushing the state-of-the-art technology needs. NASA s Earth science program has deployed 18 highly complex satellites, with a total of 80 sensors, so far and is in a process of defining and launching multiple observing systems in the next decade. Due to the heightened security alert of the nation, researchers and technologists are paying serious attention to the use of these science driven technologies for dual use. In other words, how such sophisticated observing and measuring systems can be used in detecting multiple types of security concerns with a substantial lead time so that the appropriate law enforcement agencies can take adequate steps to defuse any potential risky scenarios. This paper examines numerous NASA technologies such as laser/lidar systems, microwave and millimeter wave technologies, optical observing systems, high performance computational techniques for rapid analyses, and imaging products that can have a tremendous pay off for security applications.

Critical Technology Determination for Future Human Space Flight

Science.gov (United States)

Mercer, Carolyn R.; Vangen, Scott D.; Williams-Byrd, Julie A.; Stecklein, Jonette M.; Rahman, Shamim A.; Rosenthal, Matthew E.; Hornyak, David M.; Alexander, Leslie; Korsmeyer, David J.; Tu, Eugene L.;

Multi-item economic production quantity model for imperfect items with multiple production setups and rework under the effect of preservation technology and learning environment

Directory of Open Access Journals (Sweden)

Preeti Jawla

2016-09-01

Full Text Available This study aims to investigate the multi-item inventory model in a production/rework system with multiple production setups. Rework can be depicted as the transformation of production rejects, failed, or non-conforming items into re-usable products of the same or lower quality during or after inspection. Rework is very valuable and profitable, especially if materials are limited in availability and also pricey. Moreover, rework can be a good contribution to a ‘green image environment’. In this paper, we establish a multi-item inventory model to determine the optimal inventory replenishment policy for the economic production quantity (EPQ model for imperfect, deteriorating items with multiple productions and rework under inflation and learning environment. In inventory modelling, Inflation plays a very important role. In one cycle, production system produces items in n production setups and one rework setup, i.e. system follows (n, 1 policy. To reduce the deterioration of products preservation technology investment is also considered in this model. Holding cost is taken as time dependent. We develop expressions for the average profit per time unit, including procurement of input materials, costs for production, rework, deterioration cost and storage of serviceable and reworkable lots. Using those expressions, the proposed model is demonstrated numerically and the sensitivity analysis is also performed to study the behaviour of the model.

Managing diabetes mellitus using information technology: a systematic review.

Science.gov (United States)

Riazi, H; Larijani, B; Langarizadeh, M; Shahmoradi, L

2015-01-01

To review published evidences about using information technology interventions in diabetes care and determine their effects on managing diabetes. Systematic review of information technology based interventions. MEDLINE®/PubMed were electronically searched for articles published between 2004/07/01 and 2014/07/01. A comprehensive, electronic search strategy was used to identify eligible articles. Inclusion criteria were defined based on type of study and effect of information technology based intervention in relation to glucose control and other clinical outcomes in diabetic patients. Studies must have used a controlled design to evaluate an information technology based intervention. A total of 3613 articles were identified based on the searches conducted in MEDLINE from PubMed. After excluding duplicates (n = 6), we screened titles and abstracts of 3607 articles based on inclusion criteria. The remaining articles matched with inclusion criteria (n = 277) were reviewed in full text, and 210 articles were excluded based on exclusion criteria. Finally, 67 articles complied with our eligibility criteria and were included in this study. In this study, the effect of various information technology based interventions on clinical outcomes in diabetic patients extracted and measured from selected articles is described and compared to each other. Information technology based interventions combined with the usual care are associated with improved glycemic control with different efficacy on various clinical outcomes in diabetic patients.

HLA-DRB1*03:01 and HLA-DRB1*04:01 modify the presentation and outcome in autoimmune hepatitis type-1.

Science.gov (United States)

van Gerven, N M F; de Boer, Y S; Zwiers, A; Verwer, B J; Drenth, J P H; van Hoek, B; van Erpecum, K J; Beuers, U; van Buuren, H R; den Ouden, J W; Verdonk, R C; Koek, G H; Brouwer, J T; Guichelaar, M M J; Vrolijk, J M; Coenraad, M J; Kraal, G; Mulder, C J J; van Nieuwkerk, C M J; Bloemena, E; Verspaget, H W; Kumar, V; Zhernakova, A; Wijmenga, C; Franke, L; Bouma, G

2015-06-01

The classical human leukocyte antigen (HLA)-DRB1*03:01 and HLA-DRB1*04:01 alleles are established autoimmune hepatitis (AIH) risk alleles. To study the immune-modifying effect of these alleles, we imputed the genotypes from genome-wide association data in 649 Dutch AIH type-1 patients. We therefore compared the international AIH group (IAIHG) diagnostic scores as well as the underlying clinical characteristics between patients positive and negative for these HLA alleles. Seventy-five percent of the AIH patients were HLA-DRB1*03:01/HLA-DRB1*04:01 positive. HLA-DRB1*03:01/HLA-DRB1*04:01-positive patients had a higher median IAIHG score than HLA-DRB1*03:01/HLA-DRB1*04:01-negative patients (P<0.001). We did not observe associations between HLA alleles and alanine transaminase levels (HLA-DRB1*03:01: P=0.2; HLA-DRB1*04:01; P=0.5); however, HLA-DRB1*03:01 was independently associated with higher immunoglobulin G levels (P=0.04). The HLA-DRB1*04:01 allele was independently associated with presentation at older age (P=0.03) and a female predominance (P=0.04). HLA-DRB1*03:01-positive patients received immunosuppressive medication and liver transplantation. In conclusion, the HLA-DRB1*03:01 and HLA-DRB1*04:01 alleles are both independently associated with the aggregate diagnostic IAIHG score in type-1 AIH patients, but are not essential for AIH development. HLA-DRB1*03:01 is the strongest genetic modifier of disease severity in AIH.

Science and Technology (S and T) Roadmap Collaboration between SMC, NASA, and Government Partners

Science.gov (United States)

Betser, Joseph; Ewart, Roberta; Chandler, Faith

2016-01-01

National Security Space (NSS) presents multi-faceted S and T challenges. We must continually innovate enterprise and information management; provide decision support; develop advanced materials; enhance sensor technology; transform communication technology; develop advanced propulsion and resilient space architectures and capabilities; and enhance multiple additional S and T domains. These challenges are best met by leveraging advanced S and T research and technology development from a number of DoD agencies and civil agencies such as NASA. The authors of this paper have engaged in these activities since 2006 and over the past decade developed multiple strategic S and T relationships. This paper highlights the Office of the Space Missile Systems Center (SMC) Chief Scientist (SMC/ST) collaboration with the NASA Office of Chief Technologist (NASA OCT), which has multiple S and T activities that are relevant to NSS. In particular we discuss the development of the Technology Roadmaps that benefit both Civil Space and NSS. Our collaboration with NASA OCT has been of mutual benefit to multiple participants. Some of the other DoD components include the Defense Advanced Research Projects agency (DARPA), Air Force Research Laboratory (AFRL), Naval Research Laboratory (NRL), The USAF Office of Chief Scientist, the USAF Science Advisory Board (SAB), Space and Naval Warfare Systems Command (SPAWAR), and a number of other services and agencies. In addition, the human talent is a key enabler of advanced S and T activities; it is absolutely critical to have a strong supply of talent in the fields of Science Technology, Engineering, and Mathematics (STEM). Consequently, we continually collaborate with the USAF Institute of Technology (AFIT), other service academies and graduate schools, and other universities and colleges. This paper highlights the benefits that result from such strategic S and T partnerships and recommends a way forward that will continually build upon these

34 CFR 614.1 - What is the purpose of the Preparing Tomorrow's Teachers to Use Technology program?

Science.gov (United States)

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What is the purpose of the Preparing Tomorrow's Teachers to Use Technology program? 614.1 Section 614.1 Education Regulations of the Offices of the... Use Technology program? (a) This program provides grants to help future teachers become proficient in...

Experimental Performance of the NRL 8-Beam, 4-Cavity Multiple-Beam Klystron

Science.gov (United States)

Abe, D. K.; Pershing, D. E.; Nguyen, K. T.; Wood, F. N.; Myers, R. E.; Eisen, E. L.; Cusick, M.; Levush, B.

2006-01-01

Multiple-beam amplifiers (MBAs) represent a device technology with the potential to produce high-power, efficient amplifiers with relatively wide bandwidths that are compact, low-weight, low-noise, and operate at reduced voltages relative to comparable single-beam devices. To better understand the device physics and technical issues involved in the design, fabrication, and operation of these devices, the U.S. Naval Research Laboratory (NRL) has an on-going program to develop high peak power (> 600 kW) multiple-beam klystrons (MBKs) operating in S-band (˜3.3 GHz).

Emerging Energy-Efficient Technologies in Buildings Technology Characterizations for Energy Modeling

Energy Technology Data Exchange (ETDEWEB)

Hadley, SW

2004-10-11

The energy use in America's commercial and residential building sectors is large and growing. Over 38 quadrillion Btus (Quads) of primary energy were consumed in 2002, representing 39% of total U.S. energy consumption. While the energy use in buildings is expected to grow to 52 Quads by 2025, a large number of energy-related technologies exist that could curtail this increase. In recent years, improvements in such items as high efficiency refrigerators, compact fluorescent lights, high-SEER air conditioners, and improved building shells have all contributed to reducing energy use. Hundreds of other technology improvements have and will continue to improve the energy use in buildings. While many technologies are well understood and are gradually penetrating the market, more advanced technologies will be introduced in the future. The pace and extent of these advances can be improved through state and federal R&D. This report focuses on the long-term potential for energy-efficiency improvement in buildings. Five promising technologies have been selected for description to give an idea of the wide range of possibilities. They address the major areas of energy use in buildings: space conditioning (33% of building use), water heating (9%), and lighting (16%). Besides describing energy-using technologies (solid-state lighting and geothermal heat pumps), the report also discusses energy-saving building shell improvements (smart roofs) and the integration of multiple energy service technologies (CHP packaged systems and triple function heat pumps) to create synergistic savings. Finally, information technologies that can improve the efficiency of building operations are discussed. The report demonstrates that the United States is not running out of technologies to improve energy efficiency and economic and environmental performance, and will not run out in the future. The five technology areas alone can potentially result in total primary energy savings of between 2 and

Integrated reconfigurable multiple-input–multiple-output antenna system with an ultra-wideband sensing antenna for cognitive radio platforms

KAUST Repository

Hussain, Rifaqat

2015-06-18

© The Institution of Engineering and Technology 2015. A compact, novel multi-mode, multi-band frequency reconfigurable multiple-input-multiple-output (MIMO) antenna system, integrated with ultra-wideband (UWB) sensing antenna, is presented. The developed model can be used as a complete antenna platform for cognitive radio applications. The antenna system is developed on a single substrate area of dimensions 65 × 120 mm². The proposed sensing antenna is used to cover a wide range of frequency bands from 710 to 3600 MHz. The frequency reconfigurable dual-element MIMO antenna is integrated with P-type, intrinsic, N-type (PIN) diodes for frequency agility. Different modes of selection are used for the MIMO antenna system reconfigurability to support different wireless system standards. The proposed MIMO antenna configuration is used to cover various frequency bands from 755 to 3450 MHz. The complete system comprising the multi-band reconfigurable MIMO antennas and UWB sensing antenna for cognitive radio applications is proposed with a compact form factor.

46 CFR 111.01-11 - Corrosion-resistant parts.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Corrosion-resistant parts. 111.01-11 Section 111.01-11 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS General § 111.01-11 Corrosion-resistant parts. Each enclosure and part of electric...

Multiple-Ring Digital Communication Network

Science.gov (United States)

Kirkham, Harold

1992-01-01

Optical-fiber digital communication network to support data-acquisition and control functions of electric-power-distribution networks. Optical-fiber links of communication network follow power-distribution routes. Since fiber crosses open power switches, communication network includes multiple interconnected loops with occasional spurs. At each intersection node is needed. Nodes of communication network include power-distribution substations and power-controlling units. In addition to serving data acquisition and control functions, each node acts as repeater, passing on messages to next node(s). Multiple-ring communication network operates on new AbNET protocol and features fiber-optic communication.

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Science.gov (United States)

2010-04-01

... shall use an electronic toll collection system as the method for collecting tolls from vehicle operators... 23 Highways 1 2010-04-01 2010-04-01 false Requirement to use electronic toll collection technology... TRANSPORTATION SYSTEMS ELECTRONIC TOLL COLLECTION § 950.5 Requirement to use electronic toll collection...

47 CFR 15.120 - Program blocking technology requirements for television receivers.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Program blocking technology requirements for television receivers. 15.120 Section 15.120 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL RADIO... transmitted pursuant to industry standard EIA/CEA-766-A “U.S. and Canadian Region Rating Tables (RRT) and...

Feasibility of large-scale deployment of multiple wearable sensors in Parkinson's disease

NARCIS (Netherlands)

Silva de Lima, A.L.; Hahn, T.; Evers, L.J.W.; Vries, N.M. de; Cohen, E.; Afek, M.; Bataille, L.; Daeschler, M.; Claes, K.; Boroojerdi, B.; Terricabras, D.; Little, M.A.; Baldus, H.; Bloem, B.R.; Faber, M.J.

2017-01-01

Wearable devices can capture objective day-to-day data about Parkinson's Disease (PD). This study aims to assess the feasibility of implementing wearable technology to collect data from multiple sensors during the daily lives of PD patients. The Parkinson@home study is an observational, two-cohort

Orthogonal frequency division multiple access fundamentals and applications

CERN Document Server

Jiang, Tao; Zhang, Yan

2010-01-01

Supported by the expert-level advice of pioneering researchers, Orthogonal Frequency Division Multiple Access Fundamentals and Applications provides a comprehensive and accessible introduction to the foundations and applications of one of the most promising access technologies for current and future wireless networks. It includes authoritative coverage of the history, fundamental principles, key techniques, and critical design issues of OFDM systems. Covering various techniques of effective resource management for OFDM/OFDMA-based wireless communication systems, this cutting-edge reference:Add

[Births and children after assisted reproductive technologies. A retrospective analysis with special regard to multiple pregnancies at the Department of Obstetrics and Gynecology, Paracelsus Medical University Salzburg (2000-2009) with an extrapolation for Austria].

Science.gov (United States)

Maier, B; Reitsamer-Tontsch, S; Weisser, C; Schreiner, B

2011-10-01

Austria still lacks a baby-take-home rate after assisted reproductive technologies (ART) and therefore an adequate quality management of ART. This paper extrapolates data about births/infants after ART at the University Clinic of Obstetrics and Gynaecology (PMU/SALK) in Salzburg for Austria, especially in regard to multiple births/infants collected between 2000 and 2009. On average 2 271 infants were born per year during the last 10 years. Among them, 76 infants (3.34% of all children) were born after ART. Of all children conceived by ART and born (759) at the University Clinic of Obstetrics and Gynaecology 368 are multiples. This is 48.5% of all children born after ART. 31.6% of all multiples born were conceived through ART. The extrapolation of data concerning multiples results in 1 255 multiples/year after ART for Austria. Without a baby-take-home rate, serious quality management of reproductive medicine is impossible. Online registration of deliveries and infants is the only adequate approach. The data of this statistical extrapolation from a single perinatal center not only provide a survey about the situation in Austria, but also support the claim of a quantitative (numbers) as well as qualitative (condition of infants) baby-take-home rate after ART. © Georg Thieme Verlag KG Stuttgart · New York.

Perspectives and utilization technologies of chicory ( Cichorium ...

African Journals Online (AJOL)

Exploring and developing multiple utility technologies of plant resources is an alternative way for improving the efficiency of land used for food and fuel production. Chicory (Cichorium intybus L.) has a nutritional quality comparable to lucerne as it contains similar proportions of protein, lipid, minerals and other nutrients.

The E-Book: Technological Promise for Learning.

Science.gov (United States)

Galbreath, Jeremy

2001-01-01

Explores the concept of electronic books and how they fit in with educational technology. Topics include new portable devices that store multiple electronic books; multimedia capabilities; the ability to connect with other electronic devices, including computer networks; and future possibilities that may depend on the acceptance of change. (LRW)

46 CFR 35.01-55 - Pilot boarding operation.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Pilot boarding operation. 35.01-55 Section 35.01-55... Requirements § 35.01-55 Pilot boarding operation. (a) The master shall ensure that pilot boarding equipment is... instructions. (b) The master shall ensure compliance with the following during pilot boarding operations: (1...

The Tipping Points of Technology Development

Directory of Open Access Journals (Sweden)

Tauno Kekäle

2014-07-01

Full Text Available The tipping point, the decisive point in time in the competition between old and new, is an interesting phenomenon in physics of today. This aspect in technology acceptance is connected to many business decisions such as technology investments, product releases, resource allocation, sales forecasts and, ultimately, affects the profitability and even survival of a company. The tipping point itself is based on many stochastic and dynamic variables, and the process may at least partly be described as path-dependent. This paper analyses the tipping point from three aspects: (1 product performance, (2 features of the market and infrastructure (including related technologies and human network externalities, and (3 actions of the incumbents (including customer lock-in, systems lock-in, and sustaining innovation. The paper is based on the Bass s-curve idea and the technology trajectory concept proposed by Dosi. Three illustrative cases are presented to make the point of the multiple factors affecting technology acceptance and, thus, the tipping point. The paper also suggests outlines for further research in field of computer simulation.

Mathematics for engineering, technology and computing science