WorldWideScience

Sample records for technology japan literature

  1. Japan's electronic packaging technologies

    Science.gov (United States)

    Tummala, Rao R.; Pecht, Michael

    1995-02-01

    The JTEC panel found Japan to have significant leadership over the United States in the strategic area of electronic packaging. Many technologies and products once considered the 'heart and soul' of U.S. industry have been lost over the past decades to Japan and other Asian countries. The loss of consumer electronics technologies and products is the most notable of these losses, because electronics is the United States' largest employment sector and is critical for growth businesses in consumer products, computers, automobiles, aerospace, and telecommunications. In the past there was a distinction between consumer and industrial product technologies. While Japan concentrated on the consumer market, the United States dominated the industrial sector. No such distinction is anticipated in the future; the consumer-oriented technologies Japan has dominated are expected to characterize both domains. The future of U.S. competitiveness will, therefore, depend on the ability of the United States to rebuild its technological capabilities in the area of portable electronic packaging.

  2. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    1988-05-06

    Sought ( Nobuaki Teraoka; PUROMETEUSU, Nov 87) 62 IPCR Molecular Laser Uranium Enrichment Method Discussed (GENSHIRYOKU IINKAI GEPPO, Nov 87... Kobayashi ) Investigation of Tokyo University character of winter (Professor Tatsuo thunder on Japan Kawamura, Sea side by new Assistant...PUROMETEUSU in Japanese Nov 87 pp 78-81 [Article by Nobuaki Teraoka, Technology Development Division, Atomic Energy Bureau, Science and Technology Agency

  3. Japan's technology and manufacturing infrastructure

    Science.gov (United States)

    Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

    1995-02-01

    The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

  4. Potato irradiation technology in Japan

    International Nuclear Information System (INIS)

    Takehisa, M.

    1981-01-01

    After the National research program on potato irradiation, the public consumption of potatoes irradiated to a maximum of 15 krad was authorized by the Ministry of Welfare. Shihoro Agricultural Cooperative Association, one of the largest potato producers in Japan with an annual production of 200,000 tons, intended an application of the irradiation to their potato storage system. This paper describes the technological background of the potato irradiation facility and operational experience. (author)

  5. Advanced USC technology in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Fukuda, Masafumi [National Institute for Materials Science, Tsukuba, Ibaraki (Japan). High Temperature Materials Center

    2010-07-01

    The 600deg-C class Ultra Super-Critical(USC) steam condition technology was mainly developed through projects led by J-Power in the '80s and 90s'. In 2001, the project was successfully finished with newly developed 9-12% chromium steels. These materials were selected for the major parts of the USC power plants in Japan and almost half of the coal power plants have the USC steam condition today. However, aged plants, which were built in the '70s and early '80s will reach the point where they will need to be rebuilt or refurbished in the near future. The steam temperatures of the older plants are 538 deg-C or 566deg-C. We did a case study, retrofitting these plants with the USC and an advanced USC technology that takes a 700deg-C class steam temperature to increase thermal efficiency and to reduce CO{sub 2} emissions. The study showed that the advanced USC Technology(A-USC) is suitable for the retrofitting of aged plants and can reduce CO{sub 2} emissions by about 15%. The Japanese government launched the ''Cool Earth-Innovative Energy Technology Program'' in 2008 March to promote international cooperation and actively contribute to substantial global greenhouse gas emissions reductions. 21 technologies that will contribute to substantial reductions in CO{sub 2} emissions by efficiency improvement and low carbonization were selected. The A-USC that aims at 46% (net, HHV) thermal efficiency of coal power generation is included in the technologies. We started a large-scale development project of the A-USC technology in 2008 August. 700deg-C class boiler, turbine and valve technologies, which include high temperature material technology, will be developed. Some candidate materials for boilers are being tested. Turbine rotor and casing materials are being developed and tested, as well. Two years from the beginning of the project, we have obtained some useful test results regarding the candidate materials. (orig.)

  6. Nuclear Forensics Technologies in Japan

    International Nuclear Information System (INIS)

    Shinohara, N.; Kimura, Y.; Okubo, A.; Tomikawa, H.

    2015-01-01

    Nuclear forensics is the analysis of intercepted illicit nuclear or radioactive material and any associated material to provide evidence for nuclear attribution by determining origin, history, transit routes and purpose involving such material. Nuclear forensics activities include sampling of the illicit material, analysis of the samples and evaluation of the attribution by comparing the analysed data with database or numerical simulation. Because the nuclear forensics methodologies provide hints of the origin of the nuclear materials used in illegal dealings or nuclear terrorism, it contributes to identify and indict offenders, hence to enhance deterrent effect against such terrorism. Worldwide network on nuclear forensics can lead to strengthening global nuclear security regime. In the ESARDA Symposium 2015, the results of research and development of fundamental nuclear forensics technologies performed in Japan Atomic Energy Agency during the term of 2011-2013 were reported, namely (1) technique to analyse isotopic composition of nuclear material, (2) technique to identify the impurities contained in the material, (3) technique to determine the age of the purified material by measuring the isotopic ratio of daughter thorium to parent uranium, (4) technique to make image data by observing particle shapes with electron microscope, and (5) prototype nuclear forensics library for comparison of the analysed data with database in order to evaluate its evidence such as origin and history. Japan’s capability on nuclear forensics and effective international cooperation are also mentioned for contribution to the international nuclear forensics community.

  7. Japan Report - Science and Technology

    Science.gov (United States)

    1986-10-17

    Stock of Bacillus Subtilis Bacillus subtilis is a relative of bacillus natto that has been in use in Japan from the ancient times. It is safe and...addition to the advantages of this combination of personal styles, the two had great confidence in each other. Chairman Kaneo is the so-called "fair...sixth year of his presidency. That has been just the right age for a president, and given these advantages Sunagane has a good chance of becoming

  8. History of nuclear technology development in Japan

    Science.gov (United States)

    Yamashita, Kiyonobu

    2015-04-01

    Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident.

  9. History of nuclear technology development in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, Kiyonobu, E-mail: yamashita.kiyonobu@jaea.go.jp [Visiting Professor, at the Faculty of Petroleum and Renewable Energy Engineering, University Teknologi Malaysia Johor Bahru 81310 (Malaysia); General Advisor Nuclear HRD Centre, Japan Atomic Energy Agency, TOKAI-mura, NAKA-gun, IBARAKI-ken, 319-1195 (Japan)

    2015-04-29

    Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident.

  10. History of nuclear technology development in Japan

    International Nuclear Information System (INIS)

    Yamashita, Kiyonobu

    2015-01-01

    Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident

  11. JPRS Report. Science & Technology: Japan.

    Science.gov (United States)

    1988-12-09

    Molding Technology [Takashi Kasai , Akihiko Hirota; KIKAI TO KOGU, May 88] 106 Injection Molding Technology [Toshiyuki Iwahashi; KIKAI TO KOGU, May 88...Development Shu Isa -Planning Office Fumio Sato —Control Office Shizuka Kudo - Patent Office Taro Inoue —Technical Information Office Takeshi...the possibility that a more serious situation could occur. Fumio Kaneko, who is in charge of the marine sector, joined the company in 1971 after

  12. JTEC panel on display technologies in Japan

    Science.gov (United States)

    Tannas, Lawrence E., Jr.; Glenn, William E.; Credelle, Thomas; Doane, J. William; Firester, Arthur H.; Thompson, Malcolm

    1992-01-01

    This report is one in a series of reports that describes research and development efforts in Japan in the area of display technologies. The following are included in this report: flat panel displays (technical findings, liquid crystal display development and production, large flat panel displays (FPD's), electroluminescent displays and plasma panels, infrastructure in Japan's FPD industry, market and projected sales, and new a-Si active matrix liquid crystal display (AMLCD) factory); materials for flat panel displays (liquid crystal materials, and light-emissive display materials); manufacturing and infrastructure of active matrix liquid crystal displays (manufacturing logistics and equipment); passive matrix liquid crystal displays (LCD basics, twisted nematics LCD's, supertwisted nematic LCD's, ferroelectric LCD's, and a comparison of passive matrix LCD technology); active matrix technology (basic active matrix technology, investment environment, amorphous silicon, polysilicon, and commercial products and prototypes); and projection displays (comparison of Japanese and U.S. display research, and technical evaluation of work).

  13. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    1987-10-27

    much attention needs to be focused on the possibilities for the societal acceptance of AI technology and the problem of industrial and economic ...techni- cian training methods, AI implementation and economic benefits, Interna- tional problems) 2. Relationships with society (Examples: Promoting...also be extended. With respect to the EICE, which emulates MPU functions, the EICE-ID was publicized in April, 1987. This defines the ZICE function

  14. Water pollution control technology in Japan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    This work is a compilation by members of the Committee for Studying Transfer of Environmental Technology on the expertise and technology developed by the members for controlling water pollution in Japan, together with consideration of issues concerning the transfer of environmental technologies to developing countries. The committee is composed of representatives for the Environment Agency, Japan, Osaka Prefectural Government, Osaka Municipal Government, and 25 companies such as manufacturers of environmental equipment. The document contains a total of 93 short papers grouped into sections on: industrial wastewater treatment; sewage treatment; right soil treatment; sludge treatment; and miscellaneous. One paper by the Kausai Electric Power Co., Inc., discusses waste water treatment systems in oil-fired thermal power plants; another describes an internally circulating fluidized bed boiler for cocombusting coal with industrial wastes.

  15. Open literature review of threats including sabotage and theft of fissile material transport in Japan

    International Nuclear Information System (INIS)

    Cochran, John Russell; Furaus, James Phillip; Marincel, Michelle K.

    2005-01-01

    This report is a review of open literature concerning threats including sabotage and theft related to fissile material transport in Japan. It is intended to aid Japanese officials in the development of a design basis threat. This threat includes the external threats of the terrorist, criminal, and extremist, and the insider threats of the disgruntled employee, the employee forced into cooperation via coercion, the psychotic employee, and the criminal employee. Examination of the external terrorist threat considers Japanese demographics, known terrorist groups in Japan, and the international relations of Japan. Demographically, Japan has a relatively homogenous population, both ethnically and religiously. Japan is a relatively peaceful nation, but its history illustrates that it is not immune to terrorism. It has a history of domestic terrorism and the open literature points to the Red Army, Aum Shinrikyo, Chukaku-Ha, and Seikijuku. Japan supports the United States in its war on terrorism and in Iraq, which may make Japan a target for both international and domestic terrorists. Crime appears to remain low in Japan; however sources note that the foreign crime rate is increasing as the number of foreign nationals in the country increases. Antinuclear groups' recent foci have been nuclear reprocessing technology, transportation of MOX fuel, and possible related nuclear proliferation issues. The insider threat is first defined by the threat of the disgruntled employee. This threat can be determined by studying the history of Japan's employment system, where Keiretsu have provided company stability and lifetime employment. Recent economic difficulties and an increase of corporate crime, due to sole reliability on the honor code, have begun to erode employee loyalty

  16. Radiation curing technology progress and its industrial applications in Japan

    International Nuclear Information System (INIS)

    Ukachi, Takashi

    2003-01-01

    Optics, electronics and display industries are now the driving forces for the Japanese radiation curing technology. The purpose of this paper is to overview the newly developed radiation curing technology in Japan, in particular, its industrial applications, and to present the market figures in radiation curing applications, which were surveyed by RadTech Japan in 2002 afresh. (author)

  17. The Stanford University US-Japan Technology Management Center

    National Research Council Canada - National Science Library

    Dasher, Richard

    2002-01-01

    This grant established the U.S.-Japan Technology Management Center, Stanford University School of Engineering, as an ongoing center of excellence for the study of emerging trends and interrelationships between technology...

  18. Development of clean coal technologies in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Sato, M. [Electric Power Research Industry, Yokosuka (Japan). Central Research Inst.

    2013-07-01

    In Japan, we have to import almost of primary energy resources from all over the world. We depend on foreign countries for 96% of our primary energy supply. Following the two oil crises in the 1970s, Japan has diversified its energy resources through increased use of nuclear energy, natural gas and coal as well as the promotion of energy efficiency and conservation.

  19. United States Japan Industry and Technology Management Training

    National Research Council Canada - National Science Library

    Gercik, Patricia

    2001-01-01

    .... The intellectual focus of the Program is to integrate the research methodologies of the social sciences, the humanities, and technology to approach issues confronting the United States and Japan...

  20. Research; BOSS Study Trip Japan '09 : Architecture, Urbanism, Real Estate & Housing and Technology in Japan

    NARCIS (Netherlands)

    Feenstra, R.; Van Beelen, C.; Wamelink, J.W.F.; Geraedts, R.P.

    2010-01-01

    Japan is a land of many faces as we discovered: from seasonal changes, and thereby heavy rainfall, high humidity, tropical cyclones; to a stunning 127,300,000 inhabitants; or what about the only 10% buildable surface of the continent; seismic activity; fast going technological developments like

  1. Cooperation in Japan. Grades Kindergarten-Third. Elementary Literature Series, Part 1.

    Science.gov (United States)

    Mukai, Gary

    The Stanford Program on International and Cross-Cultural Education (SPICE) represents a long-term effort by Stanford University to improve international and cross-cultural education in elementary and secondary schools. This volume of the elementary literature series focuses on the primary grades; utilizes primary source literature from Japan;…

  2. A Review of literature on the clinical psychological study on the hearing impaired in Japan

    OpenAIRE

    Fujitomo, Masakazu

    2002-01-01

    The purpose of this paper was to review literatures about past clinical psychological studies on the hearing impaired in japan, in order to get suggestions about subjects on psychological supports and clinical psychological studies for the hearing impaired in Japan. First, in the topic of the history and subjects on the clinical psychological study and psycological supports for the hearing impaired, it was showed that the pathological viewpoint was taken place for the cultural viewpoint in th...

  3. A Tribute to the Japanese Literature of Korean Writers in Japan

    Directory of Open Access Journals (Sweden)

    Elise Foxworth

    2006-12-01

    Full Text Available As a recipient of a Japan Foundation Fellowship in 2000, I was able to commence doctoral studies on the little-known Japanese literature of zainichi Koreans in Japan. The term ‘zainichi Korean’, as opposed to ‘newcomer Korean,’ refers to Koreans and their descendants whose presence in Japan is a direct result of Japan’s thirty-five year occupation of the Korean Peninsula, which began in 1910. My overarching goal was to achieve a nuanced understanding of postwar Japanese society, one that encompassed zainichi Korean perspectives, which are generally overlooked by mainstream studies.

  4. Japan society for software science and technology

    CERN Document Server

    Nakajima, Reiji; Hagino, Tatsuya

    1990-01-01

    Advances in Software Science and Technology, Volume 1 provides information pertinent to the advancement of the science and technology of computer software. This book discusses the various applications for computer systems.Organized into three parts encompassing 13 chapters, this volume begins with an overview of the phase structure grammar for Japanese called JPSG, and a parser based on this grammar. This text then explores the logic-based knowledge representation called Uranus, which uses a multiple world mechanism. Other chapters consider the optimal file segmentation techniques for multi-at

  5. Research and development of nitride fuel cycle technology in Japan

    International Nuclear Information System (INIS)

    Minato, Kazuo; Arai, Yasuo; Akabori, Mitsuo; Tamaki, Yoshihisa; Itoh, Kunihiro

    2004-01-01

    The research on the nitride fuel was started for an advanced fuel, (U, Pn)N, for fast reactors, and the research activities have been expanded to minor actinide bearing nitride fuels. The fuel fabrication, property measurements, irradiation tests and pyrochemical process experiments have been made. In 2002 a five-year-program named PROMINENT was started for the development of nitride fuel cycle technology within the framework of the Development of Innovative Nuclear Technologies by the Ministry of Education, Culture, Sports, Science and Technology of Japan. In the research program PROMINENT, property measurements, pyrochemical process and irradiation experiments needed for nitride fuel cycle technology are being made. (author)

  6. Transforming healthcare with information technology in Japan: a review of policy, people, and progress.

    Science.gov (United States)

    Abraham, Chon; Nishihara, Eitaro; Akiyama, Miki

    2011-03-01

    Healthcare reform as part of the economic recovery plan in Japan is placing emphasis on the use of healthcare information technology (HIT). This research mainly focuses on the HIT efforts in Japan with reference to the US for context. The purpose is to: (a) provide detail on governmental policy impacting promotion of HIT adoption to provide services to the people of Japan, (b) describe the outcomes of past and present policy impacting progress based on a case study of HIT use in the Kyoto Yamashina area, and (c) discuss issues for refinement of current policy. The method is case study, and data collection techniques include: (a) interviews of people involved in policy making for HIT in Japan (Japanese healthcare professionals, government officials, and academics involved in HIT research in Japan) and use in the medical community of HIT in the Kyoto Yamashina area, (b) archived document analysis of reports regarding government policy for HIT policy and user assessment for HIT mainly in the case study site, and (c) the literature review about HIT progression and effectiveness assessments to explore and describe issues concerning the transformation with HIT in Japan. This study reveals the aspects of governmental policy that have been effective in promoting successful HIT initiatives as well as some that have been detriments in Japan to help solve pressing social issues regarding healthcare delivery. For example, Japan has stipulated some standardized protocols and formats for HIT but does not mandate exactly how to engage in inter-organizational or intra-organizational health information exchange. This provides some desired autonomy for healthcare organizations and or governments in medical communities and allows for more advanced organizations to leverage current resources while providing a basis for lesser equipped organizations to use in planning the initiative. The insights gained from the Kyoto Yamashina area initiative reflect the success of past governmental

  7. Technology Acceptance Model: A Survey of Literature

    Directory of Open Access Journals (Sweden)

    Priyanka Surendran

    2013-07-01

    Full Text Available The technology acceptance model has been a theory that is most widely used to explain an individual’s acceptance of an information system. This study has reviewed numerous literatures available in this area. The different studies in this area were evaluated to understand the modifications that were done on this model. The paper then tries to provide an insight on future trends in the technology acceptance model.

  8. New air cleaning technology in Japan

    International Nuclear Information System (INIS)

    Yoshida, Y.; Kitani, S.; Matsui, H.; Ikezawa, Y.

    1981-01-01

    Application of the new techniques and improvements in air cleaning systems have been made to reduce release of radioactive materials from nuclear facilities based on the ALARA concept. For example, the reduction of release of radioactive gaseous effluents has been made by installation of a charcoal gas hold-up system and a clean steam supply system for a turbine gland seal in a BWR and of a gas decay tank system in a PWR. In connection with the effort for reduction of releases in plants, research and development on air cleaning technology have also been made. Some activities mentioned in the present paper are: removal of particulates, airborne radioiodine, noble gases and tritium; penetration characteristics of submicron DOP aerosol for HEPA filters; radioiodine removal from air exhausts; and operational performance of the incineration plants using ceramic filters

  9. [Review of the health technology assessment on surgeries in Japan].

    Science.gov (United States)

    Nishigori, Tatsuto; Kawakami, Koji; Goto, Rei; Hida, Koya; Sakai, Yoshiharu

    2015-01-01

    Health Technology Assessment (HTA) is the systematic evaluation to measure the value of new health technologies. It improves the quality of choices on hand for cost-effective health technologies that are considered valuable. Japan has built a society of longevity consisted of the institution of the universal health care system, which is financially unsustainable. In Japan, no independent HTA organization has been publicly established but the government is contemplating implementation of such system. To advance the usage of HTA into surgery, we need to establish methods for evaluating new surgical technologies with steep learning curves. The promotion of clinical researches is also essential, especially by taking advantage of observational studies from medical big data such as the Japanese nationwide database which has more than four million surgical cases registered. In addition, we need more clinical information regarding each surgical patient's quality of life and socioeconomic status. The countries already introduced HTA into their health care system have measures to solve the problems that arose and have developed necessary evaluating methods. To introduce and promote HTA in Japan without taking away the benefit of our current healthcare, it is required that surgeons collaborate with other specialists such as methodologists and health economists.

  10. Contested Histories and Happiness: Leprosy literature in Japan

    Directory of Open Access Journals (Sweden)

    K. M. Tanaka

    2013-11-01

    Full Text Available At the turn of the twentieth century, the Japanese government passed a series of laws targeting people diagnosed with Hansen’s Disease (leprosy. As a result, many patients were quarantined in public leprosaria, often for life. In order to cope with both the diagnosis of a heavily stigmatized illness and a lifetime in isolation, patients began to write. The works produced by sufferers became so popular that by the mid-1930s their writing was referred to as a distinct literary genre, “leprosy literature.” Studies of leprosy literature have focused on its depiction of human rights violations, struggles with the illness, and the difficulty of life in quarantine. However, patient writing in the 1930s also reveals the multiple ways in which patients found happiness within the institution. In this sense, leprosy literature is also a site of translation, revealing the negotiations of hospital life involving hospital and medical authorities, patients, leprosy relief groups, and government policies. Residents of the leprosaria represent happiness in multiple ways depending on their conception of their illness and life in the leprosaria. For some patients, the institution itself was a source of happiness in that their illness was stigmatized to the degree that life outside the hospital became unbearable. Other writers chafed at life in the hospital; the translation of happiness in their writing is a more complex process. This paper takes these diverse processes of translation as its starting point and examines the multiple ways in which patients conceived of health and happiness within the confines of hospital life. 

  11. White paper on science and technology, 1995. Fifty years of postwar science and technology in Japan

    International Nuclear Information System (INIS)

    1995-07-01

    This August marks 50 years since the end of World War II. Japan emerged from the ruins to overcome the post-war devastation to achieve a high level of economic growth and become the second largest economy in the world. Science and technology have played major roles as a driving force behind this quest for prosperity. However, it seems as though true prosperity is not necessarily being enjoyed by citizens of Japan today. Japan is becoming an aging society. To realize a truly rich and prosperous society in which people can live comfortably, it is important to further raise the level of science and technology. It is also necessary to ensure this development by revitalizing the economy, and to continue to utilize science and technology as an endless resource to create assets for society as a whole which will be inherited by future generations. With this viewpoint in mind, this White Paper looks back on Japan's scientific and technological development over the last 50 years, and considers the future of science and technology with a view toward realizing the true prosperity for its people. It is our hope that this White Paper will be helpful for considering the scientific and technological activities needed to bring about a Japan whose people are truly prosperous, and we will, as a government, continually increase our efforts toward the promotion of science and technology. (J.P.N.)

  12. Clean coal technologies in Japan: technological innovation in the coal industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-12-15

    This brochure reviews the history clean coal technologies (CCT) in Japan and systematically describes the present state of CCT insofar. The brochure contains three parts. Part 1. CCT classifications; Part 2. CCT overview; and Part 3. Future outlook for CCT. The main section is part 2 which includes 1) technologies for coal resources development; 2) coal-fired power generation technologies - combustion technologies and gasification technologies; 3) iron making and general industry technologies; 4) multi-purpose coal utilization technologies - liquefaction technologies, pyrolysis technologies, powdering, fluidization, and co-utilisation technologies, and de-ashing and reforming technologies; 5) Environmental protection technologies - CO{sub 2} recovery technologies; flue gas treatment and gas cleaning technologies, and technologies to effectively use coal has; 6) basic technologies for advanced coal utilization; and 7) co-production systems.

  13. A Literature Review of Spreadsheet Technology

    DEFF Research Database (Denmark)

    Bock, Alexander

    2016-01-01

    It was estimated that there would be over 55 million end-user programmers in 2012 in many different fields such as engineering,insurance and banking, and the numbers are not expected to have dwindled since. Consequently, technological advancements of spreadsheets is of great interest to a wide...... number of people from different backgrounds. This literature review presents an overview of research on spreadsheet technology, its challenges and its solutions. We also attempt to identify why software developers generally frown upon spreadsheets and how spreadsheet research can help alter this view....

  14. Electro-Optics Millimeter/Microwave Technology in Japan. Report of DoD Technology Team.

    Science.gov (United States)

    1985-05-01

    sink packages covering frequencies up to 94 GHz is being produced. They are suitable for both con- tinuous wave (CW) and pulsed operations. Mean -time...Processing Tel ecommunications Semiconductor and Electronic Components The Technology Team visited the Fujitsu Laboratory, Kanagawa. Topics covered included...Japan, the representatives of the Government of Japan and the Government of the United States of America have held discussions on the ways and means to

  15. JPRS Report, Science & Technology, Japan, Powder Metallurgy Technology

    Science.gov (United States)

    1988-12-13

    Katsuhiro Imada and Ken Sato , Materials Research Laboratory, Mitsubishi Electric Corp.; and Yasuyuki Kawagoe and Kenichiro Yamanishi, Applied...Tomomi Ishigaki and Osamu Yamamoto, Faculty of Technology, Mie University; and Mikio Takano, Hiromasa Mazaki, Zenji Hiroi and Toshichika Bando...Liberal Arts, Kyoto University; and Yasunori Ikeda, Mikio Takano and Yoshichika Bando, Institute of Chemical Research, Kyoto University

  16. Cesium and Strontium Separation Technologies Literature Review

    Energy Technology Data Exchange (ETDEWEB)

    T. A. Todd; T. A. Todd; J. D. Law; R. S. Herbst

    2004-03-01

    Integral to the Advanced Fuel Cycle Initiative (AFCI) Program’s proposed closed nuclear fuel cycle, the fission products cesium and strontium in the dissolved spent nuclear fuel stream are to be separated and managed separately. A comprehensive literature survey is presented to identify cesium and strontium separation technologies that have the highest potential and to focus research and development efforts on these technologies. Removal of these high-heat-emitting fission products reduces the radiation fields in subsequent fuel cycle reprocessing streams and provides a significant short-term (100 yr) heat source reduction in the repository. This, along with separation of actinides, may provide a substantial future improvement in the amount of fuel that could be stored in a geologic repository. The survey and review of the candidate cesium and strontium separation technologies are presented herein. Because the AFCI program intends to manage cesium and strontium together, technologies that simultaneously separate both elements are of the greatest interest, relative to technologies that separate only one of the two elements.

  17. Modeling technological learning and its application for clean coal technologies in Japan

    International Nuclear Information System (INIS)

    Nakata, Toshihiko; Sato, Takemi; Wang, Hao; Kusunoki, Tomoya; Furubayashi, Takaaki

    2011-01-01

    Estimating technological progress of emerging technologies such as renewables and clean coal technologies becomes important for designing low carbon energy systems in future and drawing effective energy policies. Learning curve is an analytical approach for describing the decline rate of cost and production caused by technological progress as well as learning. In the study, a bottom-up energy-economic model including an endogenous technological learning function has been designed. The model deals with technological learning in energy conversion technologies and its spillover effect. It is applied as a feasibility study of clean coal technologies such as IGCC (Integrated Coal Gasification Combined Cycle) and IGFC (Integrated Coal Gasification Fuel Cell System) in Japan. As the results of analysis, it is found that technological progress by learning has a positive impact on the penetration of clean coal technologies in the electricity market, and the learning model has a potential for assessing upcoming technologies in future.

  18. Overview of plant life extension technology development in Japan

    International Nuclear Information System (INIS)

    Takahashi, T.; Arai, H.; Akiyama, M.; Mishima, Y.; Okubo, T.

    1993-01-01

    In Japan, it is expected that the nuclear power will continue to play an important role in electric power supply. Since it is expected that the fast breeder reactor (FBR) will be introduced sometime during the first half of the 21st century, light water reactors (LWRs) will continue to play a key role some 30 to 40 years to come. For this reason, technology development projects are being implemented to further enhance light water reactor technology and thereby improve the reliability of LWRs. From this point, the Plant Life Extension (PLEX) technology development program [1-4] is entrusted by the Ministry of International Trade and Industry to the Japan Power Engineering and Inspection Corporation (JAPEIC). This program is an 11-year plan which started in 1985. The objectives are to extend the service lives of existing LWRs to increase the energy generated by these plants during their lifetime, and to reduce the lifetime generating costs. In this report, we will present our project overview and recent activities with respect to extensive verification tests on component material behavior. The JAPEIC PLEX project is divided into 3 phases. Phase I is the feasibility study. Phase 2 involves the verification tests and the evaluation of life extension technologies. The overall evaluation of the project will be conducted in Phase 3. The feasibility study of Phase I has been completed in fiscal year 1985 and 1986. In Phase I, the important components (the components and structures that are likely to govern the lives of nuclear power plants) have been selected. (author)

  19. Japan

    DEFF Research Database (Denmark)

    Hansen, Annette Skovsted

    2013-01-01

    I 1500- og 1600-tallet dannedes tidligt moderne stater i Europa, men samtidig eksisterede der ligeså avancerede statsdannelser uden for Europa, bl.a. i Kina, Indien og Japan. I det følgende ser vi nærmere på dannelsen af den moderne stat i Japan. Hvorfor blev Japan aldrig en europæisk koloni......? Hvordan havde japanske magthavere igennem 300 år forberedt Japan og de mennesker, der boede på de japanske øer, til at kunne udvikle en nation, der skulle blive den stærkeste og rigeste i Asien i mere end 100 år? Hvem bestemte i Japan? Kejseren eller shogunen?...

  20. Development of enrichment and reprocessing technologies in Japan

    International Nuclear Information System (INIS)

    Amanuma, Tsuyoshi

    1978-01-01

    The present status of the development of fuel cycle technologies for LWR systems in Japan is reviewed. As for the uranium enrichment technology, recent development of the centrifuge method is briefly explained. The construction schedule of the pilot plant at Ningyo-Toge is also shown. The completion of the plant is expected in 1980, and 7000 machines will be in full operation. Other methods such as gaseous diffusion, chemical separation, and laser method are shortly described. Comparisons among these different methods are also made in various economical aspects. As for the reprocessing technologies, those concerning with environmental problems, nuclear non-proliferation, and safeguard measures are explained. Recovery of krypton and xenon, method of co-process, and co-operative research and development with IAEA are the main topics here. Finally, the technological development in the field of high-level radioactive waste disposal is explained. The construction schedule of an experimental facility (CPF), development of solidification techniques, and the methods of final disposal are the main topics treated here. (Aoki, K.)

  1. New stage of clean coal technology in Japan; Clean coal technology no aratana tenkai ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kawaguchi, Y [Agency of Natural Resources and Energy, Tokyo (Japan)

    1996-09-01

    The paper described the positioning and new development of clean coal technology. Coal is an important resource which supplies approximately 30% of the energy consumed in all the world. In the Asian/Pacific region, especially, a share of coal in energy is high, around 60% of the world, and it is indispensable to continue using coal which is abundantly reserved. Japan continues using coal as an important energy among petroleum substituting energies taking consideration of the global environment, and is making efforts for development and promotion of clean coal technology aiming at further reduction of environmental loads. Moreover, in the Asian region where petroleum depends greatly upon outside the region, it is extremely important for stabilization of Japan`s energy supply that coal producing countries in the region promote development/utilization of their coal resources. For this, it is a requirement for Japan to further a coal policy having an outlook of securing stable coal supply/demand in the Asian region. 6 figs., 2 tabs.

  2. Cooperating internationally. US/Japan Civil Industrial Technologies (CIT) Arrangement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    The Civil Industrial Technologies (CIT) Arrangement was signed in July 1994 between governments of the US and Japan. Areas of research range from scientific and technical databases and bioprocessing to precompetitive processing of functionally-gradient materials and ceramics. Papers presented in this symposium include studies on thin polymer films generated by vapor deposition polymerization, development of manufacturing technique of fusing 3D C/C composite materials, measurement and analysis for high performance computing systems, low-cost fabrication of ceramic components, bioprocessing, data exchange for mass spectral databases, development of high performance aluminum nitride ceramics, precompetitive processing of functionally-gradient materials, purity determination of organic reference materials, definitive methods traceable to SI unit, development of biocompatible artificial hard tissue materials, development of photoassisted catalysis technologies, surface analysis for catalysts by electron spectroscopy, development of ultra-solid lubricant with cluster diamond, precise determination of impurities in high-purity rare-earth metals, and highly accurate acceleration measurement system. 22 refs., 86 figs., 3 tabs.

  3. Activities of Japan Nuclear Technology Institute Japanese TSO of Industry

    International Nuclear Information System (INIS)

    Nagata, T.

    2010-01-01

    Nuclear energy is a superior form of energy in that it delivers stable power supplies and counters global warming, and it is important to promote nuclear power generation as the core power sources for a nation. However, the Japanese environment surrounding nuclear energy is changing drastically, following the liberalization of market and recent series of troubles or falsifications shaking public confidence in nuclear energy. In the above mentioned situation, nuclear industries and organizations must fulfill their individual roles, and amass its strength to work toward enhancing industry initiatives for safety activities, securing safe / stable plant operations, restoring public confidence and initiate revitalization of nuclear energy operations. The Japan Nuclear Technology Institute (JANTI) has been established as a new entity for supporting and leading the industry's further progress in March 2005. Members of JANTI are not only utilities but also component manufacturers and constructors. JANTI enhance the technological foundation of nuclear energy based on scientific and rational data, coordinates its use among a wide range of relevant organizations, and helps members enhance their voluntary safety activities. At the same time, it is independent of utilities, and exercises a function of checking industry at the objective, third-party standpoint. As for the activities of JANTI itself, information disclosure and the establishment of a council comprising external members will enhance administration transparency. (author)

  4. The paradox of imaging technology: A review of the literature

    International Nuclear Information System (INIS)

    Murphy, F.J.

    2006-01-01

    Purpose: The purpose of this study was to review the social scientific literature associated with medical imaging technology. Methods: An extensive search of published studies in nursing, psychology and anthropology was undertaken to support the radiography specific literature. Results: Following a broad definition of technology and its profound influence on society, an analysis of imaging literature revealed a complex relationship between technology and human interactions. Examples are cited for CT, MRI and ultrasound. Conclusion: It is suggested that any attempt to understand imaging technology must place at its centre the perspectives of patients and radiographers. Scientific descriptors must be balanced with equal deliberation given to 'soft technology'

  5. Japan

    International Nuclear Information System (INIS)

    Matsui, T.

    1975-01-01

    A report is given on the basic research and development in food irradiation in Japan. Two new irradiation facilities are extensively described. Basic research is performed in radiation chemistry of fruits, potatoes, fish products, meat products and model systems. Microbiological research is concerned with Clostridium botulinum and radicidation and radurization studies, as well as effects of combination treatment on Micrococcus radiodurans. Radiation treatment of grain, frutis, vegetables, potatoes, fish, meat and meat products and other commodities is performed. Wholesomeness studies are dealing with the nutritional value and animal feeding studies are carried out with irradiated potatoes, onions, rice, wheat, and sausages. Two short chapters are concerned with legislation and marketing. (MG) [de

  6. Medical technology in Japan the politics of regulation

    CERN Document Server

    Altenstetter, Christa

    2014-01-01

    Compared to its American and European counterparts, Japan lags in adopting innovative medical devices and making new treatments and procedures available. Christa Altenstetter examines the contextual conditions of Japan's medical profession and its regulatory framework. Altenstetter looks into how physicians and device companies connect to the government and bureaucracy, the relationships connecting Japanese patients to their medical system and governmental bureaucracy, and how relationships between policymakers and the medical profession are changing.

  7. Survey of the development of industrial technology in Japan; Sangyo gijutsu rekishi keisho chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Conditions for creating Japan`s type technologies have been investigated by extracting technologies and experiences meriting the succession to the next generation among the industrial technologies in Japan after World War II. Technological creativity of Japan began to appear from the 1970`s. Quartz watch of SEIKO, U-Matic VTR of SONY, ladle refinery method of DAIDO Steel, PAN-based carbon fiber of TORAY, continuous annealing of Nippon Steel, calculating machine using liquid crystal of SHARP, ASA-400 high sensitivity film of FUJI FILM, and Japanese word-processor of TOSHIBA are the examples. The basic ability to create those products and technology lays in the diversity of firms in electronic device and fine machinery industries consisting the boundary between general and electrical machinery, the systematizing ability and inter-industrial cooperation which were promoted through quality control, automatization of assembly and production control by computer, and the research and development capability which has been brought up during the high economic growth as a learning process of technology. The society and industries have to make efforts to create the new creative conditions for younger generations. Otherwise, Japan`s technology will not develop. 134 refs., 19 figs., 8 tabs.

  8. Do investment-specific technological changes matter for business fluctuations? Evidence from Japan

    OpenAIRE

    Hirose, Yasuo; Kurozumi, Takushi

    2011-01-01

    The observed decline in the relative price of investment goods to consumption goods in Japan suggests the existence of investment-specific technological (IST) changes. We examine whether IST changes are a major source of business fluctuations in Japan, by estimating a dynamic stochastic general equilibrium model with Bayesian methods. We show that IST changes are less important than neutral technological changes in explaining output fluctuations. We also demonstrate that investment fluctuatio...

  9. Japan

    International Nuclear Information System (INIS)

    Huttner, Kevin; Suzuki, Tatsujiro

    1987-01-01

    The Japanese nuclear power programme began with reactors imported from the United States. A natural uranium heavy water reactor using domestic materials was started in 1958. Subsequent progress was with light water reactors imported from the United States. Domestic reactor development was of a fast breeder reactor and an advanced thermal reactor. By March 1986 there were 32 commercial power plants in operation which produced approximately 23% of the electricity consumed in Japan. Ten more are under construction and six more are planned. Their location and comparative generating cost are tabulated. Energy demand and targets for nuclear power generation are discussed. The FBR advanced thermal reactor and high temperature reactor programmes are summarized. The Japanese nuclear fuel cycle - uranium prospecting, enrichment, reprocessing, the development of mixed oxide fuels, thermal recycling and radioactive waste management is also discussed. (U.K.)

  10. Self-regulation of recombinant DNA technology in Japan in the 1970s.

    Science.gov (United States)

    Nagai, Hiroyuki; Nukaga, Yoshio; Saeki, Koji; Akabayashi, Akira

    2009-07-01

    Recombinant DNA technology was developed in the United States in the early 1970s. Leading scientists held an international Asilomar Conference in 1975 to examine the self regulation of recombinant DNA technology, followed by the U.S. National Institutes of Health drafting the Recombinant DNA Research Guidelines in 1976. The result of this conference significantly affected many nations, including Japan. However, there have been few historical studies on the self-regulation of recombinant technologies conducted by scientists and government officials in Japan. The purpose of this paper is to analyze how the Science Council of Japan, the Ministry of Education, Science adn Culture, and the Science and Technology Agency developed self-regulation policies for recombinant DNA technology in Japan in the 1970s. Groups of molecular biologist and geneticists played a key role in establishing guidelines in cooperation with government officials. Our findings suggest that self-regulation policies on recombinant DNA technology have influenced safety management for the life sciences and establishment of institutions for review in Japan.

  11. Japan turns pro-life: recent change in reproductive health policy and challenges by new technologies

    OpenAIRE

    Okamoto, Etsuji

    2014-01-01

    Japan, known as a pro-choice country in terms of abortion, is currently facing the increase of “selective abortions” thanks to new prenatal screening. Efforts to restrict proliferation of new technology has not been successful and it is likely that Japan will turn pro-life by strictly enforcing the Maternity Protection Act (MPA), which prohibits abortions due to “fetal cause”.

  12. Evaluation of new energy technologies and the selection in Japan

    International Nuclear Information System (INIS)

    Oshima, Keiichi

    1977-01-01

    Since the oil shock in 1973, advanced countries pondered over the countermeasures regarding security, the circulation of foreign currency accumulating in oil-producing countries, and the lowering of the dependence on petroleum. Moreover, the problem of primary products, the aid to development, finance and debt were discussed with developing countries. The problem of energy is not that of short term, but the structural weakness and the contradiction of the energy problem were exposed in the form of the oil crisis. As for the general outlook during 10 years from now, the development of atomic energy slows down, the import of oil expands largely, and the production of coal is small, thus the prospect of using substitute energy is not so optimistic as before. The developments of breeder reactors, the utilization of solar energy and geothermal energy, and the technical development of using coal are discussed especially as the problems in Japan. Regarding environmental pollution, coal is highly problematic, and atomic energy is clean next to LNG. The dependence of atomic energy on foreign countries is low in view of the investment in foreign countries. As the selection feasible for Japan to fill the gap of energy demand and supply from 1985 to 2000, coal or atomic energy is to be used. The use of atomic energy in Japan is important for worldwide economy. (Kako, I.)

  13. Analysis of the BEV Technology Progress of America, Europe, Japan and Korea Based on Patent Map

    Science.gov (United States)

    Yurong, Huang; Yuanyuan, Hou; Jingyan, Zhou; Ru, Liu

    2018-02-01

    The paper analyzed the Battery Electric Vehicle patent application trend, major country distribution, main technology layout and patentee of America, Europe, Japan and Korea based on patent information from 2006 to 2016 by using patent map method, and visualized the Battery Electric Vehicle technology progress conditions of the four countries and regions in the last decade.

  14. US/Japan workshop on mitigation and adaptation technologies related to global climate change

    Energy Technology Data Exchange (ETDEWEB)

    Bernthal, F.M.

    1993-12-31

    It is a great pleasure for me to have the honor of delivering the keynote address for this important gathering, an honor enhanced further because of the many activities and historic relationships represented by this workshop. First of all, it represents the spirit of continuing cooperation and good relations between the United States and Japan. With the aid of the framework provided by the U.S./Japan Science and Technology Agreement, our two nations can come together to address a problem that has no national boundaries {hor_ellipsis} and we can think about solutions of potential benefit to all citizens of the global community. This workshop also symbolizes the spirit of cooperation so characteristic of the conduct of research in science and technology -- cooperation between us as individual scientists and engineers, between the various institutions we represent, and across our diverse disciplines. This workshop is only the second of its kind. The first US/Japan Workshop on global climate change was held last year in Japan. That workshop focused on cooperative scientific research in the United States and Japan. Out of it came a general agreement to continue collaborative work and to extend cooperation into the area of global change-related technologies, in particular those technologies that hold promise for mitigation and adaptation.

  15. Importance of policy for energy system transformation: Diffusion of PV technology in Japan and Germany

    International Nuclear Information System (INIS)

    Chowdhury, Sanjeeda; Sumita, Ushio; Islam, Ashraful; Bedja, Idriss

    2014-01-01

    Photovoltaic (PV) has the highest cost reduction potential among all renewable energy sources (RES). To overcome institutional barriers, developing the technology, and creating an initial market, policies are needed. Comparative case studies of Japan and German PV sector from 1990 to 2011 were developed. Japan dominated the PV industry during 1994–2004, PV market increased to 290 MW in 2005. After 2005 Japan's PV market decreased. German PV market increased from 44 MW in 2000 to 7.5 GW in 2011. The reason behind Japanese PV market decline was the unaligned energy policy and termination of incentives. This paper discusses about successful policy implementation and the impact of policy for the diffusion of PV technology. The analysis section of this paper shows how much the PV technology has been diffused during the period of 1990–2011 and finally what will make the transformation process successful. - Highlights: • We studied PV diffusion of Japan and German considering public energy policy, environmental policy and cost reduction. • This study determined that policy and incentives are responsible for cost reduction. • Japans concentration on nuclear energy more than renewables, made the PV diffusion slow. • Successful implementation of FIT helped Germany reduce PV electricity price more than grid electricity

  16. Current Status of World Nuclear Fuel Cycle Technology (II): Japan

    International Nuclear Information System (INIS)

    Jeong, Chang Joon; Ko, Won Il

    2007-06-01

    Japan needs to import around 80% of its energy requirements. In 1966, the first nuclear power plant began operation, nuclear energy has been a national strategic priority since 1973. Currently, 55 reactors provide around 30% of the country's electricity. Japanese energy policy has been conducted by the energy security and minimization of dependence of energy imports. The main factors regarding nuclear power are: - Continue to have nuclear power as a main factor of electricity production. - Recycle uranium and plutonium, and start domestic reprocessing from 2005. - Continue to develop fast breeder reactors to increase uranium utilization. - Promote the nuclear transparency to the public, emphasizing safety and non-proliferation. Also, the prospects of Asia's nuclear energy growth has been reviewed

  17. Online Technologies for Health Information and Education: A literature review.

    Science.gov (United States)

    Gill, Harkiran K; Gill, Navkiranjit; Young, Sean D

    2013-04-01

    There is a growing body of research focused on the use of social media and Internet technologies for health education and information sharing. The authors reviewed literature on this topic, with a specific focus on the benefits and concerns associated with using online social technologies as health education and communication tools. Studies suggest that social media technologies have the potential to safely and effectively deliver health education, if privacy concerns are addressed. Utility of social media-based health education and communication will improve as technology developers and public health officials determine ways to improve information accuracy and address privacy concerns.

  18. The Stanford University US-Japan Technology Management Center

    National Research Council Canada - National Science Library

    Dasher, Richard

    2002-01-01

    ..., nanotechnologies, MEMS, system-level chip integration, and advanced manufacturing. Our technology management focus embraced industry standards and standardization, intellectual property management, U.S...

  19. Contesting the natural in Japan: moral dilemmas and technologies of dying.

    Science.gov (United States)

    Lock, M

    1995-03-01

    The paper opens with a discussion about the recognition of "whole-brain death" as the end of life in North America in order to perform solid organ transplants. This situation is contrasted with Japan, where, despite no financial or technological restrictions, brain death is not recognized, and transplants from brain-dead bodies cannot be performed. The Japanese cultural debate over the past twenty-five years about the "brain-death problem" is presented, followed by an analysis of Japanese attitudes towards technological intervention into what is taken to be the "natural" domain, together with a discussion of current Japanese attitudes towards death. This debate is interpreted as one aspect of a search for moral order in contemporary Japan, revealing ambivalence about self and other, Japan and the West, and tradition and modernity.

  20. Recent Cooperative Research Activities of HDD and Flexible Media Transport Technologies in Japan

    Science.gov (United States)

    Ono, Kyosuke

    This paper presents the recent status of industry-university cooperative research activities in Japan on the mechatronics of information storage and input/output equipment. There are three research committees for promoting information exchange on technical problems and research topics of head-disk interface in hard disk drives (HDD), flexible media transport and image printing processes which are supported by the Japan Society of Mechanical Engineering (JSME), the Japanese Society of Tribologists (JAST) and the Japan Society of Precision Engineering (JSPE). For hard disk drive technology, the Storage Research Consortium (SRC) is supporting more than 40 research groups in various different universities to perform basic research for future HDD technology. The past and present statuses of these activities are introduced, particularly focusing on HDD and flexible media transport mechanisms.

  1. Ethical challenges with welfare technology: a review of the literature.

    Science.gov (United States)

    Hofmann, Bjørn

    2013-06-01

    Demographical changes in high income counties will increase the need of health care services but reduce the number of people to provide them. Welfare technology is launched as an important measure to meet this challenge. As with all types of technologies we must explore its ethical challenges. A literature review reveals that welfare technology is a generic term for a heterogeneous group of technologies and there are few studies documenting their efficacy, effectiveness and efficiency. Many kinds of welfare technology break with the traditional organization of health care. It introduces technology in new areas, such as in private homes, and it provides new functions, e.g. offering social stimuli and entertainment. At the same time welfare technology is developed for groups that traditionally have not been extensive technology users. This raises a series of ethical questions with regard to the development and use of welfare technologies, which are presented in this review. The main challenges identified are: (1) Alienation when advanced technology is used at home, (2) conflicting goals, as welfare technologies have many stakeholders with several ends, (3) respecting confidentiality and privacy when third-party actors are involved, (4) guaranteeing equal access and just distribution, and (5) handling conflicts between instrumental rationality and care in terms of respecting dignity and vulnerability. Addressing these issues is important for developing and implementing welfare technologies in a morally acceptable manner.

  2. A report from the second US/Japan workshop on global change research: Environmental response technologies (mitigation and adaptation). United States-Japan Science and Technology Agreement

    Energy Technology Data Exchange (ETDEWEB)

    Edgerton, S. [comp.] [National Science Foundation, Washington, DC (United States). Committee on Earth and Environmental Sciences; Mizuno, Tateki [comp.] [National Inst. for Resources and Environment, MITI (Japan)

    1993-12-31

    The Second US - Japan Workshop on Global Change: Environmental Response Technologies for Global Change was hosted by the Program on Resources at the East-West Center, in Honolulu, Hawaii on February 1--3, 1993, on behalf of the United States Committee on Earth and Environmental Sciences (CEES) of the Federal Coordinating Council for Science, Engineering, and Technology (FCCSET). This workshop brought together over fifty leading scientists from the two countries to review existing technologies and to identify needed research on the development of new technologies for mitigation and adaptation of global change. The Workshop was organized around three areas of research: (1) capture, fixation/utilization, and disposal of CO{sub 2} (e.g. CO{sub 2}, separation and capture technologies, ocean and land disposal of CO{sub 2}; (2) energy production and conservation technologies to reduce greenhouse gas emissions (e.g. combustion efficiency, non-carbon based energy technologies, energy conservation technologies); and (3) adaptation technologies and practices related to global climate change (e.g., adaptation responses of crops to climate change, adapting urban infrastructure for climate change). Priorities for joint research in each of these areas were discussed. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  3. Japan acts to speed technology transfer from universities

    CERN Multimedia

    Saegusa, A

    1999-01-01

    A Japanese law will take effect in the autumn to promote technology transfer from universities and laboratories. The new measures aim to encourage collaborations with the commercial sector and allow industrial research partners to retain title to inventions (1 page).

  4. Japan's post-Fukushima reconstruction: A case study for implementation of sustainable energy technologies

    International Nuclear Information System (INIS)

    Nesheiwat, Julia; Cross, Jeffrey S.

    2013-01-01

    Following World War II, Japan miraculously developed into an economic powerhouse and a model of energy efficiency among developed countries. This lasted more than 65 years until the Northeastern Japan earthquake and tsunami induced nuclear crisis of March 2011 brought Japan to an existential crossroads. Instead of implementing its plans to increase nuclear power generation capacity from thirty percent to fifty percent, Japan shut-down all fifty-four nuclear reactors for safety checks and stress-checks (two have since been restarted), resulting in reduced power generation during the summer of 2012. The reconstruction of Northeastern Japan approaches at a time when the world is grappling with a transition to sustainable energy technologies—one that will require substantial investment but one that would result in fundamental changes in infrastructure and energy efficiency. Certain reconstruction methods can be inappropriate in the social, cultural and climatic context of disaster affected areas. Thus, how can practitioners employ sustainable reconstructions which better respond to local housing needs and availability of natural energy resources without a framework in place? This paper aims at sensitizing policy-makers and stakeholders involved in post disaster reconstruction by recognizing advantages of deploying sustainable energy technologies, to reduce dependence of vulnerable communities on external markets. - Highlights: • We examine the energy challenges faced by Japan in the aftermath of Fukushima. • We identify policy measures for the use of energy technologies applicable to disaster prone nations. • We evaluate the potential for renewable energy to support reduced reliance on nuclear energy in Japan. • We model scenarios for eco-towns and smart-cities in post-disaster reconstruction. • We assess the role of culture in formulating energy policy in post-disaster reconstruction

  5. Proceedings of the 6. Japan-Brazil Symposium on Science and Technology

    International Nuclear Information System (INIS)

    1988-01-01

    The most recent results of Brazil-Japan agreement for technological development on areas of space science and plasma, were presented. Problems related to: astrophysics, cosmic radiation interaction with earth atmosphere, plasma physics, and construction of rockets and satellites for space researches were discussed. (M.C.K.) [pt

  6. Academic Librarians, Professional Literature, and New Technologies: A Survey

    Science.gov (United States)

    Hardesty, Skye; Sugarman, Tammy

    2007-01-01

    Keeping abreast of professional literature and the latest trends is critical for academic librarians to be successful, but in a time of information glut, are librarians achieving this? Over seven hundred academic librarians responded to this survey and inform us about their use of both traditional methods and new technologies to stay current.

  7. Working Together: A Literature Review of Campus Information Technology Partnerships

    Science.gov (United States)

    Exline, Eleta

    2009-01-01

    This article reviews the recent literature about the essential but often uneasy alliances made between content experts (archivists and librarians) and technology experts. Differing professional cultures, misunderstandings of one another, limited abilities to envision change, and lack of support from top-level administrators are the most often…

  8. Japanese contributions to the Japan-US workshop on blanket design/technology

    International Nuclear Information System (INIS)

    Tone, Tatsuzo; Seki, Yasushi; Minato, Akio; Kobayashi, Takeshi; Mori, Seiji; Kawasaki, Hiromitsu; Sumita, Kenji.

    1983-02-01

    This report describes Japanese papers presented at the Japan-US Workshop on Blanket Design/Technology which was held at Argonne National Laboratory, November 10 - 11, 1982. Overview of Fusion Experimental Reactor (FER), JAERI's activities related to first wall/blanket/shield, summary of FER blanket and its technology development issues and summary of activities at universities on fusion reactor blanket engineering are covered. (author)

  9. Norwegian-developed carbon dioxide technology licensed to Japan

    International Nuclear Information System (INIS)

    Pettersen, Jostein

    2000-01-01

    In the late 1980s, restrictions on the use of ozone-depleting substances created increased interest in alternative working fluids in refrigerators and heat pumps. Carbon dioxide (CO2) is an incombustible, non-toxic and not ozone-depleting natural substance with low specific greenhouse effect. However, CO2 has some unusual thermodynamic properties. Thus, the pressure of a CO2 based system must be high, up to 150 bar, which means that new equipment must be developed. Research at SINTEF and the Technical University in Trondheim, Norway, in 1988-89 resulted in several patents which have later been commercialized and internationally licensed. The most important developments have been in air conditioning for cars, heat pumps for hot water and refrigeration systems for supermarkets. In Japan, a heat pump for hot water has been developed under licence. This is a 4.5 kW heat pump designed for use in detached houses and larger flats. One of the advantages of CO2 is that a high water temperature (70-90 C ) is obtained. The hot water container can then be made quite small. The heat pump is marketed by Tokyo Electric Power Company, which during the night has surplus power that can be sold for less than 25% of the daytime tariff. Compared with gas-fired water heaters, the consumption of primary energy is reduced by 30-50%. This is an important contribution to more efficient use of fossil fuel. Using CO2 also avoids the risk of fire and explosion that exists in the use of gas-fired water heaters

  10. Human resource development in the beginning phase of nuclear technology development in Japan

    International Nuclear Information System (INIS)

    Yamashita, Kiyonobu

    2015-01-01

    Japan Research Reactor No.1 (JRR-1) was constructed as the first nuclear reactor in Japan and reached the first criticality in 1957. The construction of both the first BWR and the first PWR were started in the same year 1967 and they started power operation in the same year 1970. Engineers of electrical utilities and vendors gave efforts to have knowledge for reactor engineering mainly on the job training with high self-motivation to contribute for nuclear technology development. A part of them participated in the reactor engineering training course of the JAERI. (author)

  11. Ubiquitous Learning Project Using Life-Logging Technology in Japan

    Science.gov (United States)

    Ogata, Hiroaki; Hou, Bin; Li, Mengmeng; Uosaki, Noriko; Mouri, Kosuke; Liu, Songran

    2014-01-01

    A Ubiquitous Learning Log (ULL) is defined as a digital record of what a learner has learned in daily life using ubiquitous computing technologies. In this paper, a project which developed a system called SCROLL (System for Capturing and Reusing Of Learning Log) is presented. The aim of developing SCROLL is to help learners record, organize,…

  12. New Technology Japan, Vol. 23, No. 8, November 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    ;Partial Contents: New Frontier for ECO-Business: 100 T/Y Pilot Plant for Manufacturing Bidegradable Plastics Using Polylactic Acid; New Type of Superhigh-Speed Cargo Carriers; Lactoferricin Displays Antibacterial Effect Against Helicobactor Pylori; Two Types of Wireless Five Prevention Glass Sheets; Electrostatic Chuck for Semiconductor Sputtering; Technology for Efficient and Accurate Spot Welding; Large-Sized Ozone Generator with Highest Ouput in the World; Low-Voltage Lightning Arrester; and Low-Flow Anesthesia Apparatus Provides, High Level of Efficiency and Environmental Friendliness.

  13. Technology assessments in transportation: survey of recent literature

    Energy Technology Data Exchange (ETDEWEB)

    LaBelle, S.J.

    1980-03-01

    A survey and an evaluation of recent studies of transportation systems done in a technology-assessment framework were undertaken as the basis for a detailed statement of work for a US Department of Energy technology assessment of transportation energy-conservation strategies. Several bibliographies were searched and numerous professionals in the field of technology assessment were contacted regarding current work. Detailed abstracts were prepared for studies judged to be sufficiently broad in coverage of impacts assessed, yet detailed in coverage of all or part of the nation's transportation systems. Some studies were rich in data but not comprehensive in their analytical approach; brief abstracts were prepared for these. An explanation of the criteria used to screen the studies, as well as abstracts of 37 reports, are provided in this compendium of transportation-technology-assessment literature.

  14. Questionnaire for the contents of cancer professional training plan by Ministry of Education, Culture, Sports, Science, and Technology Japan

    International Nuclear Information System (INIS)

    Sasaki, Ryohei; Numasaki, Hodaka; Teshima, Teruki; Nishio, Teiji; Fukuda, Haruyuki; Ashino, Yasuo; Onishi, Hiroshi; Nakamura, Katsumasa; Nagata, Yasushi

    2009-01-01

    Questionnaire for the contents of cancer professional training plan by Ministry of Education, Culture, Sports, Science, and Technology Japan were widely assessed and introduced in the 4th Japanese Society for Therapeutic Radiology and Oncology (JASTRO) Future Planning Seminar held on March 8, 2008 in Tokyo, Japan. From the assessment, small number of instructors for medical physicists was elucidated as the most important problem for the future of fields of radiation oncology in Japan. (author)

  15. Representations of Science and Technology in Cordel Literature

    Directory of Open Access Journals (Sweden)

    Carla Almeida

    2016-09-01

    Full Text Available In Brazilian cultural manifestations, science is not usually pictured prominently. Still, one can find references to it in some of the most popular forms of communication. Cordel literature is one of them. In this article, we try to understand how the scientific world is inserted and represented in this literary genre. We did a discourse analysis based on a corpus of 50 Cordel booklets on topics related to science. We note that the booklets present, as a whole, an ambivalent image of science, extolling the scientific achievements and their authors in some cases, whereas, in others, showing a critical view of technological development. Our study suggests that the mixing of science and Cordel literature has the potential to bring together scientific and popular cultures. This could also promote a critical thinking in the public about the relationship between science and society. Therefore, Cordel literature may be an interesting tool for education and popularization of science.

  16. Development programs on decommissioning technology for reactors and fuel cycle facilities in Japan

    International Nuclear Information System (INIS)

    Fujiki, K.

    1992-01-01

    The Science and Technology Agency (STA) of Japan is promoting technology development for decommissioning of nuclear facilities by entrusting various research programs to concerned research organisations: JAERI, PNC and RANDEC, including first full scale reactor decommissioning of JPDR. According to the results of these programs, significant improvement on dismantling techniques, decontamination, measurement etc. has been achieved. Further development of advanced decommissioning technology has been started in order to achieve reduction of duration of decommissioning work and occupational exposures in consideration of the decommissioning of reactors and fuel cycle facilities. (author) 5 refs.; 7 figs.; 1 tab

  17. Light water reactors development in Japan. (1) Introduction of LWR technology (PWR)

    International Nuclear Information System (INIS)

    Yamada, Ichita; Suzuki, Shigemitsu

    2008-01-01

    Evolutionary progress of the LWR plants in the last half-century was reviewed in series. Introduction of LWR technology (PWR) in Japan was reviewed in this article. Kansai Electric Power imported the Mihama-1 - a 340 MWe PWR built by Westinghouse Corp. It began operating in 1970 to supply power to the World Exposition (EXPO70). There followed a period in which designs was purchased from US vendors and they were constructed with the co-operation of Mitsubishi Heavy Industry, who would then receive a license to build similar plants in Japan and develop the capacity to design and construct PWRs by itself. Progress of designs, fabrications, project management and construction of PWRs were reviewed from technology transfer to its autonomy age. (T. Tanaka)

  18. Change Management in Information Technology - A Literature Review

    Directory of Open Access Journals (Sweden)

    Mahadi Hasan Miraz

    2016-03-01

    Full Text Available The purpose of this paper is to present the state of the art of research in Information Technology (IT in Change Management (CM. Initial studies indicate that investments into CM in IT often do not add the predictable value, neither to the CM division himself nor to the association supported by the CM section. A basis for further study into this complex and inter disciplinary area is therefore needed. This literature review will contribute to this basis. Based on a Systematic Literature Review (SLR method, journal articles, with a focus on CM in IT were found. Relevant articles were organized in categories according to focus on Technology, IT layer, CM process and theory, research method applied and type of findings. Finally research gaps were identified. There seems to be a general belief in technology combinations as a way to speed up the rather slow IT diffusion process in CM. It is documented that current research into CM in IT has an unbalanced focus on few specific technologies, IT layers and CM processes, and that further research should focus more on the IT implementation process and use. Knowledge from application and use could be fed back into (and strengthen conceptualization and progress, thereby adding more value to CM. Only the search engine Scopus is used. This is the first review paper focusing on CM in general in IT, giving an overview of the area and delivering a basis for further research.

  19. A Report on the Development of Rare Earth-Cobalt Permanent Magnet Technology - Japan.

    Science.gov (United States)

    1981-07-01

    Implantable pumps and valves , head support harness in development). C. MICROWAVE AND ION BEAM TECHNOLOGY 1. Microwave Tubes: TWT PPM focusing, klystrons...III and IV were devoted to various medical applications that employ REPM. These included various dental prosthetic devices, tech- niques for measuring...minimize losses due to fracture in handling or heat treatment. Very little work has been done on this topic in the West or in Japan. The only two papers

  20. The Cultivation of New Technology-Based Firms and Roles of Venture Capital Firms in Japan

    OpenAIRE

    Kirihata, Tetsuya

    2007-01-01

    In this paper, I analyze post-investment activities of venture capital firms (VCFs) based on a questionnaire survey and discuss the issues and challenges of post-investment activities of VCFs with new technology based firms (NTBFs) in Japan. The questionnaire survey reveals that business supports desired by NTBFs can be classified into four groups."business strategies adjustment and motivation", "business advice and networking", "finance and crisis management", and "recruitment assistance". T...

  1. Extraction process technology for the new reprocessing plants in France and Japan

    International Nuclear Information System (INIS)

    Boullis, B.; Drain, F.; Hugelman, D.

    1991-01-01

    The new reprocessing plants UP3 and UP2-800 in France and Rokkasho in Japan use or will use an improved technology for their extraction cycles. The equipment selected are pulse columns (cylindrical and annular) and mixer-settlers (normal type and extra-flat type). This paper presents the equipment selected for each plant and the extensive R and D performed especially for pulsed columns by CEA and also the results of first active runs in UP3

  2. Performance of PWR study in the technology supplier countries: south korea and japan case

    International Nuclear Information System (INIS)

    Sriyana

    2007-01-01

    Electricity is needed as an infrastructure to support the national economic growth. For economic development sustainability, energy alternatives should be provided. Nuclear Power Plant (NPP) become the alternative of electricity generation for optimum energy mix in Indonesia and planned to operate in the 2016. Several studies have already done to prepare the NPP construction. This study focused on NPP performance especially PWR type in Asia, namely Japan and South Korea. Methodology used in this is literature tracing and a small calculation. The energy availability per unit per year is used as a parameter for evaluating the NPP performance. This conclusion are 1) the amount of NPP - PWR type in Japan is 22 units with total operational experiences 526 reactor-years and the average energy availability factor about 70.7% per unit per year. Meanwhile for the same type South Korea has 16 unit with total operational experience 222 reactor-years and average availability factor per unit per year is about 86.9%. 2) the 1000 class of PWR type both South Korea and Japan have 14 units. The operational experiences for thi class is 170 reactor-year for South Korean and 307 reactor-year for Japan. Meanwhile the average availability factor per unit per year is about 87.0% for South Korea and 69.6% for Japan. 3) the average availability factor is closed to capacity factor, so is important for real figure in assuming the techno-economic parameters, because it will influence the result o economic calculation. (author)

  3. US hospital payment adjustments for innovative technology lag behind those in Germany, France, and Japan.

    Science.gov (United States)

    Hernandez, John; Machacz, Susanne F; Robinson, James C

    2015-02-01

    Medicare pioneered add-on payments to facilitate the adoption of innovative technologies under its hospital prospective payment system. US policy makers are now experimenting with broader value-based payment initiatives, but these have not been adjusted for innovation. This article examines the structure, processes, and experience with Medicare's hospital new technology add-on payment program since its inception in 2001 and compares it with analogous payment systems in Germany, France, and Japan. Between 2001 and 2015 CMS approved nineteen of fifty-three applications for the new technology add-on payment program. We found that the program resulted in $201.7 million in Medicare payments in fiscal years 2002-13-less than half the level anticipated by Congress and only 34 percent of the amount projected by CMS. The US program approved considerably fewer innovative technologies, compared to analogous technology payment mechanisms in Germany, France and Japan. We conclude that it is important to adjust payments for new medical innovations within prospective and value-based payment systems explicitly as well as implicitly. The most straightforward method to use in adjusting value-based payments is for the insurer to retrospectively adjust spending targets to account for the cost of new technologies. If CMS made such retrospective adjustments, it would not financially penalize hospitals for adopting beneficial innovations. Project HOPE—The People-to-People Health Foundation, Inc.

  4. Using digital technologies to engage with medical research: views of myotonic dystrophy patients in Japan.

    Science.gov (United States)

    Coathup, Victoria; Teare, Harriet J A; Minari, Jusaku; Yoshizawa, Go; Kaye, Jane; Takahashi, Masanori P; Kato, Kazuto

    2016-08-24

    As in other countries, the traditional doctor-patient relationship in the Japanese healthcare system has often been characterised as being of a paternalistic nature. However, in recent years there has been a gradual shift towards a more participatory-patient model in Japan. With advances in technology, the possibility to use digital technologies to improve patient interactions is growing and is in line with changing attitudes in the medical profession and society within Japan and elsewhere. The implementation of an online patient engagement platform is being considered by the Myotonic Dystrophy Registry of Japan. The aim of this exploratory study was to understand patients' views and attitudes to using digital tools in patient registries and engagement with medical research in Japan, prior to implementation of the digital platform. We conducted an exploratory, cross-sectional, self-completed questionnaire with a sample of myotonic dystrophy (MD) patients attending an Open Day at Osaka University, Japan. Patients were eligible for inclusion if they were 18 years or older, and were diagnosed with MD. A total of 68 patients and family members attended the Open Day and were invited to participate in the survey. Of those, 59 % submitted a completed questionnaire (n = 40). The survey showed that the majority of patients felt that they were not receiving the information they wanted from their clinicians, which included recent medical research findings and opportunities to participate in clinical trials, and 88 % of patients indicated they would be willing to engage with digital technologies to receive relevant medical information. Patients also expressed an interest in having control over when and how they received this information, as well as being informed of how their data is used and shared with other researchers. Overall, the findings from this study suggest that there is scope to develop a digital platform to engage with patients so that they can receive

  5. Progress of radiation curing technology and its industrial applications in Japan

    International Nuclear Information System (INIS)

    Takashi Ukachi

    2007-01-01

    The Japanese industry has grown with annual growth rate 108%. Electric parts and devices industry strongly promoted Japanese economy. UV/EB curing market in Japan enjoyed its steady growth with an annual growth rate 107%. By realizing the advantages of good performance and high functionality, the UV/EB curing technology has expanded its application field especially in leading edge industries, such as electric parts and devices, FPDs, Optical fibers and cables, optical recording media, and their fabrication and manufacturing. This paper summarizes the Japanese UV/EB market situation and overviews the latest progress of UV/EB technology. (Author)

  6. Some problems on domestic technology development from a point of fabricator of nuclear power plant. [Japan

    Energy Technology Data Exchange (ETDEWEB)

    Watamori, T [Hitachi Ltd., Tokyo (Japan)

    1976-06-01

    During past 20 years, the nuclear power industry in Japan has introduced foreign technology, digested it in a short period, and continued to research and develop domestic technology. Now, 95% of the machinery and equipments for nuclear power generation with light water reactors can be produced domestically, and some technologies are going to be exported. However, the nuclear power industry is still in a severe environment. The progress of the development of nuclear power plants passed the periods of organizational preparation, the construction of research reactors, the import of foreign technologies and reactors for practical use, and the construction of domestically produced reactors for practical use. The supplying capacity of the nuclear power industry in Japan reached 6 units of 1,000 MW yearly, but in order to meet the long term plan of nuclear power generation, this capacity must be further enhanced. The problems in the promotion of domestic production are the establishment of independent technologies, the promotion of standardization, the strengthening of business basis, the upbringing of relating enterprises, and the acceleration of national projects. Since the energy crisis, the trend of filling up energy demand with nuclear power generation became conspicuous, but for the expansion of export, the problems of safety guarantee, nuclear fuel cycle, and financial measures must be solved with government aid.

  7. Nurturing Young Children's Moral Development through Literature in Japan and the USA

    Science.gov (United States)

    Izumi-Taylor, Satomi; Scott, Jerrie C.

    2013-01-01

    The purpose of this study was to examine the views of American and Japanese early childhood teachers regarding the nurturing of young children's moral development using literature. The data consisted of responses to a questionnaire and written explanations of 36 American and 36 Japanese teachers. By comparing responses of the two groups, it was…

  8. WHAT ARE USER PERSPECTIVES OF EXOSKELETON TECHNOLOGY? A LITERATURE REVIEW.

    Science.gov (United States)

    Hill, Deborah; Holloway, Catherine Sarah; Morgado Ramirez, Dafne Zuleima; Smitham, Peter; Pappas, Yannis

    2017-01-01

    Exoskeletons are electromechanical devices that are worn by a human operator to increase their physical performance. Several exoskeletons have been developed to restore functional movements, such as walking, for those with paralysis due to neurological impairment. However, existing exoskeletons have limitations with respect to affordability, size, weight, speed, and efficiency, which may reduce their functional application. Therefore, the aim of this scoping review is to collect and narratively synthesize the perspectives of users of exoskeleton technology. A systematic literature search was conducted across several healthcare related online databases. A total of 4,619 articles were identified, of which 51 were selected for full review. Only three studies were identified that met the inclusion criteria. Of these, one showed an incongruence between users' expectations and experiences of device use; another reported perspectives on potential rather than actual device use, ranking design features in order of perceived importance; and the other reported ratings of ease of device use in training. The heterogeneity of studies included within this review, leave the authors unable to suggest consensus as to user perspectives of exoskeleton technology. However, it is apparent that users are able to suggest priorities for exoskeleton design and that users' perspectives of exoskeleton technology might change in response to experience of use. The authors, therefore, suggest that exoskeleton design should be an iterative process, whereby user perspectives are sought, incorporated and refined by tangible experience, to ensure that devices developed are acceptable to and usable by the populations they seek to re-enable.

  9. Database use and technology in Japan: JTEC panel report. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Wiederhold, G.; Beech, D.; Bourne, C.; Farmer, N.; Jajodia, Sushil; Kahaner, D.; Minoura, Toshi; Smith, D.; Smith, J.M.

    1992-04-01

    This report presents the findings of a group of database experts, sponsored by the Japanese Technology Evaluation Center (JTEC), based on an intensive study trip to Japan during March 1991. Academic, industrial, and governmental sites were visited. The primary findings are that Japan is supporting its academic research establishment poorly, that industry is making progress in key areas, and that both academic and industrial researchers are well aware of current domestic and foreign technology. Information sharing between industry and academia is effectively supported by governmental sponsorship of joint planning and review activities, and enhances technology transfer. In two key areas, multimedia and object-oriented databases, the authors can expect to see future export of Japanese database products, typically integrated into larger systems. Support for academic research is relatively modest. Nevertheless, the senior faculty are well-known and respected, and communicate frequently and in depth with each other, with government agencies, and with industry. In 1988 there were a total of 1,717 Ph.D.`s in engineering and 881 in science. It appears that only about 30 of these were academic Ph.D.`s in the basic computer sciences.

  10. Gender differences in information technology usage: a U.S.-Japan comparison

    OpenAIRE

    Hiroshi Ono; Madeline Zavodny

    2004-01-01

    This study examines whether there are differences in men’s and women’s use of computers and the Internet in the United States and Japan and how any such gender gaps have changed over time. The authors focus on these two countries because information technology is widely used in both, but there are substantial differences in institutions and social organizations. They use microdata from several surveys during the 1997–2001 period to examine differences and trends in computer and Internet usage...

  11. The progress and trends in the nucleonic gauge technology: Experience and contribution of Japan

    International Nuclear Information System (INIS)

    Tominaga, H.

    2000-01-01

    Most of major nucleonic gauges in Japan have already passed the period of saturation in number of use in big industries. On the other hand, however, small gauges with low activity sources are expected to increasingly diffuse into smaller industries. There have been so far more unique gauges and more interesting applications in small gauges using low activity sources, which are free from legal regulation. Still at present new applications with advanced technology are being developed using such small sources. Description is given on the current status of nucleonic gauges with emphasis on development of new techniques and applications. (author)

  12. Head-end process technology for the new reprocessing plants in France and Japan

    International Nuclear Information System (INIS)

    Saudray, D.; Hugelmann, D.; Cho, A.

    1991-01-01

    Major technological innovations brought to the new UP3 and UP2-800 reprocessing plants of COGEMA LA HAGUE and also to the JNFS ROKKASHO plant concern the head-end process. The continuous process designed allows for high throughputs whilst meeting stringent safety requirements. The head-end of each plant includes two lines for each operation in order to guarantee availability. This paper presents the T1 head-end facility of the UP3 plant as well as the few adaptations implemented in the ROKKASHO Reprocessing Plant to fulfill the particular design requirements in Japan

  13. International cooperation of Japan in Asia for nuclear technology and application

    International Nuclear Information System (INIS)

    Machi, Sueo

    2008-01-01

    The FNCA launched by the Ministerial Meeting in Bangkok in 2000, where following vision statement was adapted: 'The FNCA is to be recognized as an effective mechanism for enhancing socio economic development through active regional partnership in the peaceful and safe utilization of nuclear technology'. The FNCA has now 10 participating countries (Australia, Bangladesh, China, Indonesia, Japan, Korea, Malaysia, the Philippines, Thailand and Vietnam) implementing 11 projects and one panel in the fields of agriculture, health care, industry, energy, human resource development, safety and environment. (author)

  14. Survey of advanced radiation technologies used at designated cancer care hospitals in Japan

    International Nuclear Information System (INIS)

    Shikama, Naoto; Tsujino, Kayoko; Nakamura, Katsumasa; Ishikura, Satoshi

    2014-01-01

    Our survey assessed the use of advanced radiotherapy technologies at the designated cancer care hospitals in Japan, and we identified several issues to be addressed. We collected the data of 397 designated cancer care hospitals, including information on staffing in the department of radiation oncology (e.g. radiation oncologists, medical physicists and radiation therapists), the number of linear accelerators and the implementation of advanced radiotherapy technologies from the Center for Cancer Control and Information Services of the National Cancer Center, Japan. Only 53% prefectural designated cancer care hospitals and 16% regional designated cancer care hospitals have implemented intensity-modulated radiotherapy for head and neck cancers, and 62% prefectural designated cancer care hospitals and 23% regional designated cancer care hospitals use intensity-modulated radiotherapy for prostate cancer. Seventy-four percent prefectural designated cancer care hospitals and 40% regional designated cancer care hospitals employ stereotactic body radiotherapy for lung cancer. Our multivariate analysis of prefectural designated cancer care hospitals which satisfy the institute's qualifications for advanced technologies revealed the number of radiation oncologists (P=0.01) and that of radiation therapists (P=0.003) were significantly correlated with the implementation of intensity-modulated radiotherapy for prostate cancer, and the number of radiation oncologists (P=0.02) was correlated with the implementation of stereotactic body radiotherapy. There was a trend to correlate the number of medical physicists with the implementation of stereotactic body radiotherapy (P=0.07). Only 175 (51%) regional designated cancer care hospitals satisfy the institute's qualification of stereotactic body radiotherapy and 76 (22%) satisfy that of intensity-modulated radiotherapy. Seventeen percent prefectural designated cancer care hospitals and 13% regional designated cancer care hospitals

  15. Healthcare Databases in Thailand and Japan: Potential Sources for Health Technology Assessment Research.

    Directory of Open Access Journals (Sweden)

    Surasak Saokaew

    Full Text Available Health technology assessment (HTA has been continuously used for value-based healthcare decisions over the last decade. Healthcare databases represent an important source of information for HTA, which has seen a surge in use in Western countries. Although HTA agencies have been established in Asia-Pacific region, application and understanding of healthcare databases for HTA is rather limited. Thus, we reviewed existing databases to assess their potential for HTA in Thailand where HTA has been used officially and Japan where HTA is going to be officially introduced.Existing healthcare databases in Thailand and Japan were compiled and reviewed. Databases' characteristics e.g. name of database, host, scope/objective, time/sample size, design, data collection method, population/sample, and variables were described. Databases were assessed for its potential HTA use in terms of safety/efficacy/effectiveness, social/ethical, organization/professional, economic, and epidemiological domains. Request route for each database was also provided.Forty databases- 20 from Thailand and 20 from Japan-were included. These comprised of national censuses, surveys, registries, administrative data, and claimed databases. All databases were potentially used for epidemiological studies. In addition, data on mortality, morbidity, disability, adverse events, quality of life, service/technology utilization, length of stay, and economics were also found in some databases. However, access to patient-level data was limited since information about the databases was not available on public sources.Our findings have shown that existing databases provided valuable information for HTA research with limitation on accessibility. Mutual dialogue on healthcare database development and usage for HTA among Asia-Pacific region is needed.

  16. Healthcare Databases in Thailand and Japan: Potential Sources for Health Technology Assessment Research.

    Science.gov (United States)

    Saokaew, Surasak; Sugimoto, Takashi; Kamae, Isao; Pratoomsoot, Chayanin; Chaiyakunapruk, Nathorn

    2015-01-01

    Health technology assessment (HTA) has been continuously used for value-based healthcare decisions over the last decade. Healthcare databases represent an important source of information for HTA, which has seen a surge in use in Western countries. Although HTA agencies have been established in Asia-Pacific region, application and understanding of healthcare databases for HTA is rather limited. Thus, we reviewed existing databases to assess their potential for HTA in Thailand where HTA has been used officially and Japan where HTA is going to be officially introduced. Existing healthcare databases in Thailand and Japan were compiled and reviewed. Databases' characteristics e.g. name of database, host, scope/objective, time/sample size, design, data collection method, population/sample, and variables were described. Databases were assessed for its potential HTA use in terms of safety/efficacy/effectiveness, social/ethical, organization/professional, economic, and epidemiological domains. Request route for each database was also provided. Forty databases- 20 from Thailand and 20 from Japan-were included. These comprised of national censuses, surveys, registries, administrative data, and claimed databases. All databases were potentially used for epidemiological studies. In addition, data on mortality, morbidity, disability, adverse events, quality of life, service/technology utilization, length of stay, and economics were also found in some databases. However, access to patient-level data was limited since information about the databases was not available on public sources. Our findings have shown that existing databases provided valuable information for HTA research with limitation on accessibility. Mutual dialogue on healthcare database development and usage for HTA among Asia-Pacific region is needed.

  17. Understanding Monitoring Technologies for Adults With Pain: Systematic Literature Review.

    Science.gov (United States)

    Rodríguez, Iyubanit; Herskovic, Valeria; Gerea, Carmen; Fuentes, Carolina; Rossel, Pedro O; Marques, Maíra; Campos, Mauricio

    2017-10-27

    Monitoring of patients may decrease treatment costs and improve quality of care. Pain is the most common health problem that people seek help for in hospitals. Therefore, monitoring patients with pain may have significant impact in improving treatment. Several studies have studied factors affecting pain; however, no previous study has reviewed the contextual information that a monitoring system may capture to characterize a patient's situation. The objective of this study was to conduct a systematic review to (1) determine what types of technologies have been used to monitor adults with pain, and (2) construct a model of the context information that may be used to implement apps and devices aimed at monitoring adults with pain. A literature search (2005-2015) was conducted in electronic databases pertaining to medical and computer science literature (PubMed, Science Direct, ACM Digital Library, and IEEE Xplore) using a defined search string. Article selection was done through a process of removing duplicates, analyzing title and abstract, and then reviewing the full text of the article. In the final analysis, 87 articles were included and 53 of them (61%) used technologies to collect contextual information. A total of 49 types of context information were found and a five-dimension (activity, identity, wellness, environment, physiological) model of context information to monitor adults with pain was proposed, expanding on a previous model. Most technological interfaces for pain monitoring were wearable, possibly because they can be used in more realistic contexts. Few studies focused on older adults, creating a relevant avenue of research on how to create devices for users that may have impaired cognitive skills or low digital literacy. The design of monitoring devices and interfaces for adults with pain must deal with the challenge of selecting relevant contextual information to understand the user's situation, and not overburdening or inconveniencing users with

  18. Proceedings of the 2nd JAERI symposium on HTGR technologies October 21 ∼ 23, 1992, Oarai, Japan

    International Nuclear Information System (INIS)

    1993-01-01

    The Japan Atomic Energy Research Institute (JAERI) held the 2nd JAERI Symposium on HTGR Technologies on October 21 to 23, 1992, at Oarai Park Hotel at Oarai-machi, Ibaraki-ken, Japan, with support of International Atomic Energy Agency (IAEA), Science and Technology Agency of Japan and the Atomic Energy Society of Japan on the occasion that the construction of the High Temperature Engineering Test Reactor (HTTR), which is the first high temperature gas-cooled reactor (HTGR) in Japan, is now being proceeded smoothly. In this symposium, the worldwide present status of research and development (R and D) of the HTGRs and the future perspectives of the HTGR development were discussed with 47 papers including 3 invited lectures, focusing on the present status of HTGR projects and perspectives of HTGR Development, Safety, Operation Experience, Fuel and Heat Utilization. A panel discussion was also organized on how the HTGRs can contribute to the preservation of global environment. About 280 participants attended the symposium from Japan, Bangladesh, Germany, France, Indonesia, People's Republic of China, Poland, Russia, Switzerland, United Kingdom, United States of America, Venezuela and the IAEA. This paper was edited as the proceedings of the 2nd JAERI Symposium on HTGR Technologies, collecting the 47 papers presented in the oral and poster sessions along with 11 panel exhibitions on the results of research and development associated to the HTTR. (author)

  19. Current status and technology development of Reprocessing Plant in Japan Nuclear Fuel Limited

    International Nuclear Information System (INIS)

    Ochi, Eiji

    2013-01-01

    It is a problem that the vitrified waste could not be produced at the down nozzle in glass furnace by accumulation of platinum group metals contented in high-level radioactive waste. This article describes our efforts to solve the problem. The glass furnace, glassification process, development of glassification technology in Japan, structure of glass furnace, improvement of glass furnace now in use, improvement of glassification technology, and development of new glass furnace and new glass materials are explained. Configuration drawing of glass furnace, heating method, glass flow from the down nozzle, existing state of platinum group metals in glass, comparison between the current glass furnace and advance furnace, analysis result of inner part of furnace, and measurement result of density, viscosity and heat capacity of molten glass are illustrated. (S.Y.)

  20. Analysis of carbon mitigation technology to 2050 in Japan through integrated energy economic model

    International Nuclear Information System (INIS)

    Komiyama, Ryoichi; Suzuki, Kengo; Nagatomi, Yu; Matsuo, Yuji; Suehiro, Shigeru

    2011-01-01

    This paper describes the outline of integrated energy economic model and calculated result concerning the outlook of energy and carbon dioxide emissions in Japan to 2050. The energy model developed in this paper is integrated one which consistently combines econometric model endogenously generating socio-economic outlook and bottom-up type technology model, MARKAL, identifying cost-minimizing optimal mix of various energy technologies. In reference scenario which imposes no carbon emissions constraint, CO 2 emission in 2050 will decrease by approximately 40% from the level of emissions in 2005. In carbon-constraints scenario, imposing emissions cap of 60% reduction by 2050 from the emissions in 2005, natural gas-fired power plant equipped with CCS and renewable energy are expected to expand its portion in power generation mix. In transportation sector on this scenario, clean energy vehicles such as electric vehicle (EV) and hydrogen fuel cell vehicle (FCV) will be deployed and contribute to mitigate CO 2 emissions. (author)

  1. NanoJapan: international research experience for undergraduates program: fostering U.S.-Japan research collaborations in terahertz science and technology of nanostructures

    Science.gov (United States)

    Phillips, Sarah R.; Matherly, Cheryl A.; Kono, Junichiro

    2014-09-01

    The international nature of science and engineering research demands that students have the skillsets necessary to collaborate internationally. However, limited options exist for science and engineering undergraduates who want to pursue research abroad. The NanoJapan International Research Experience for Undergraduates Program is an innovative response to this need. Developed to foster research and international engagement among young undergraduate students, it is funded by a National Science Foundation Partnerships for International Research and Education (PIRE) grant. Each summer, NanoJapan sends 12 U.S. students to Japan to conduct research internships with world leaders in terahertz (THz) spectroscopy, nanophotonics, and ultrafast optics. The students participate in cutting-edge research projects managed within the framework of the U.S-Japan NSF-PIRE collaboration. One of our focus topics is THz science and technology of nanosystems (or `TeraNano'), which investigates the physics and applications of THz dynamics of carriers and phonons in nanostructures and nanomaterials. In this article, we will introduce the program model, with specific emphasis on designing high-quality international student research experiences. We will specifically address the program curriculum that introduces students to THz research, Japanese language, and intercultural communications, in preparation for work in their labs. Ultimately, the program aims to increase the number of U.S. students who choose to pursue graduate study in this field, while cultivating a generation of globally aware engineers and scientists who are prepared for international research collaboration.

  2. Literacy and Technology: Integrating Technology with Small Group, Peer-led Discussions of Literature

    Directory of Open Access Journals (Sweden)

    Genya Coffey

    2012-03-01

    Full Text Available This review examines research of computer-mediated small group discussion of literature. The goal of this review is to explore several instructional formats for integrating print-based and new literacies skills. First, the theoretical foundations for the shift from teacher-led to student led discussion are outlined. Research exploring ways in which technology has been infused into several common elements of literature discussion groups are presented next. Benefits and challenges of such integration are highlighted and suggestions for future research are presented.

  3. Inventing Japan's 'robotics culture': the repeated assembly of science, technology, and culture in social robotics.

    Science.gov (United States)

    Sabanović, Selma

    2014-06-01

    Using interviews, participant observation, and published documents, this article analyzes the co-construction of robotics and culture in Japan through the technical discourse and practices of robotics researchers. Three cases from current robotics research--the seal-like robot PARO, the Humanoid Robotics Project HRP-2 humanoid, and 'kansei robotics' - show the different ways in which scientists invoke culture to provide epistemological grounding and possibilities for social acceptance of their work. These examples show how the production and consumption of social robotic technologies are associated with traditional crafts and values, how roboticists negotiate among social, technical, and cultural constraints while designing robots, and how humans and robots are constructed as cultural subjects in social robotics discourse. The conceptual focus is on the repeated assembly of cultural models of social behavior, organization, cognition, and technology through roboticists' narratives about the development of advanced robotic technologies. This article provides a picture of robotics as the dynamic construction of technology and culture and concludes with a discussion of the limits and possibilities of this vision in promoting a culturally situated understanding of technology and a multicultural view of science.

  4. Summary report on transportation of nuclear fuel materials in Japan : transportation infrastructure, threats identified in open literature, and physical protection regulations.

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, John Russell; Ouchi, Yuichiro (Japan Atomic Energy Agency, Japan); Furaus, James Phillip; Marincel, Michelle K.

    2008-03-01

    This report summarizes the results of three detailed studies of the physical protection systems for the protection of nuclear materials transport in Japan, with an emphasis on the transportation of mixed oxide fuel materials1. The Japanese infrastructure for transporting nuclear fuel materials is addressed in the first section. The second section of this report presents a summary of baseline data from the open literature on the threats of sabotage and theft during the transport of nuclear fuel materials in Japan. The third section summarizes a review of current International Atomic Energy Agency, Japanese and United States guidelines and regulations concerning the physical protection for the transportation of nuclear fuel materials.

  5. JSFR: Japan's challenge towards the competitive SFR design concept with innovative technologies

    International Nuclear Information System (INIS)

    Mihara, T.; Kotake, S.

    2006-01-01

    JSFR is a sodium-cooled, MOX(or metal) fuelled, advanced loop type fast reactor design concept conducting by Japan Atomic Energy Agency(JAEA) through the Feasibility Study on commercialized Fast Reactor(FR) Cycle Systems with participation of all parties concerned in Japan since 1999. The economic competitiveness is one of the crucial points and has been emphasized in the design study of JSFR. One of the ways for less construction cost is the compact NSSS design by introducing the following innovative technologies; Shortening the piping length, simplified configuration with the inverse L-shaped-pipes and a two-loop system even for a l,500MWe power plant, by adopting high chromium steel with lower thermal expansion and higher strength, Upgrading of the structural design standards at elevated temperature for sodium-cooled FR system, and Development of an integrated intermediate heat exchanger (IHX) with a mechanical pump. The other way is introducing passive decay heat removal system with natural circulation. The elimination of active components such as pony motors and blowers leads to reduction of the capacity of the BOP system such as electricity supply system, emergency DGs, HVAC system and component cooling water system. In order to attain lower power generation cost, not only less construction cost but also less operational cost including fuel cycle cost is crucial. Therefore higher burn-up of the averaged core, more than 150GWd/t, has been applied by introducing ODS steel cladding material. As a result, it is confirmed that the JSFR design concept is well suited to the development target equivalent to l,000USD/kWe (as NOAK, overnight cost), while ensuring safety. The most of the cost reduction comes from the innovative technologies. The R and D plan of these technologies was summarized as a roadmap and the R and D efforts are on going for establishing a technical scheme of FR cycle systems by around 2015

  6. Target validation for FCV technology development in Japan from energy competition point of view

    International Nuclear Information System (INIS)

    ENDO Eiichi

    2006-01-01

    The objective of this work is to validate the technical targets in the governmental hydrogen energy road-map of Japan by analyzing market penetration of fuel cell vehicle(FCV)s and effects of fuel price and carbon tax on it from technology competition point of view. In this analysis, an energy system model of Japan based on MARKAL is used. The results of the analysis show that hydrogen FCVs could not have cost-competitiveness until 2030 without carbon tax, including the governmental actual plan of carbon tax. However, as the carbon tax rate increases, instead of conventional vehicles including gasoline hybrid electric vehicle, hydrogen FCVs penetrate to the market earlier and more. By assuming higher fuel price and severer carbon tax rate, market share of hydrogen FCVs approaches to the governmental goal. This suggests that cheaper vehicle cost and/or hydrogen price than those targeted in the road-map is required. At the same time, achievement of the technical targets in the road-map also allows to attain the market penetration target of hydrogen FCVs in some possible conditions. (authors)

  7. Technology readiness of partitioning and transmutation toward closed fuel cycle in Japan

    International Nuclear Information System (INIS)

    Ikeda, Kazumi; Kurata, Masaki; Morita, Yasuji; Tsujimoto, Kazufumi; Minato, Kazuo; Koyama, Shin-ichi

    2011-01-01

    This paper treats technology readiness level (TRL) assessment of Partitioning and Transmutation (P-T) toward closed fuel cycle in JAPAN. The purpose is providing clarified information related to the current maturity of the partitioning and transmutation technologies by applying the methodology of TRL, parallel to attempting to establish common indications among relating technology area. The methodology should be one of useful communication tools between specialists and management level, and also among countries interested in the P-T technologies. The generic TRL in this study is based on the GNEP (Global Nuclear Energy Partnership)'s definition: TRL 3 shows the status that critical function is proved and elemental technologies are identified, TRL 4 represents that relating technologies are validated at bench scale in laboratory environment, and TRL 5 achieves the completion of development related to the subsystem and elemental technologies. Detailed indications are established through discussion of the relating specialists. Reviewed technological area includes P-T and minor actinide (MA) cycle: Fast Breeder Reactor (FBR) and Accelerator driven system (ADS) for MA transmutation, partitioning processes, and MA-bearing fuels. The assessments reveal that TRL spreads around TRL 3 to TRL 4 because each system requires more the development of elemental technologies. Transmutation core of FBR is assessed to be TRL 4 in that MA bearing integral test is required additionally, and ADS becomes TRL 3 because the elemental technologies were identified and the requirements were specified. Consequently, the common key issue is how the nuclear calculation methodology will be validated for MA-bearing-fuelled core, since several percentages of MA changes the void reactivity and the Doppler Effect significantly, which are inherently important in reactor safety. It should be that critical experiments with several kg of americium or more are difficult in the existing experimental

  8. Breeding research on sake yeasts in Japan: history, recent technological advances, and future perspectives.

    Science.gov (United States)

    Kitagaki, Hiroshi; Kitamoto, Katsuhiko

    2013-01-01

    Sake is an alcoholic beverage of Japan, with a tradition lasting more than 1,300 years; it is produced from rice and water by fermenting with the koji mold Aspergillus oryzae and sake yeast Saccharomyces cerevisiae. Breeding research on sake yeasts was originally developed in Japan by incorporating microbiological and genetic research methodologies adopted in other scientific areas. Since the advent of a genetic paradigm, isolation of yeast mutants has been a dominant approach for the breeding of favorable sake yeasts. These sake yeasts include (a) those that do not form foams (produced by isolating a mutant that does not stick to foams, thus decreasing the cost of sake production); (b) those that do not produce urea, which leads to the formation of ethyl carbamate, a possible carcinogen (isolated by positive selection in a canavanine-, arginine-, and ornithine-containing medium); (c) those that produce an increased amount of ethyl caproate, an apple-like flavor (produced by isolating a mutant resistant to cerulenin, an inhibitor of fatty-acid synthesis); and (d) those that produce a decreased amount of pyruvate (produced by isolating a mutant resistant to an inhibitor of mitochondrial transport, thus decreasing the amount of diacetyl). Given that sake yeasts perform sexual reproduction, sporulation and mating are potent approaches for their breeding. Recently, the genome sequences of sake yeasts have been determined and made publicly accessible. By utilizing this information, the quantitative trait loci (QTLs) for the brewing characteristics of sake yeasts have been identified, which paves a way to DNA marker-assisted selection of the mated strains. Genetic engineering technologies for experimental yeast strains have recently been established by academic groups, and these technologies have also been applied to the breeding of sake yeasts. Sake yeasts whose genomes have been modified with these technologies correspond to genetically modified organisms (GMOs

  9. What was the role of nurses during the 2011 great East earthquake of Japan? An integrative review of the Japanese literature.

    Science.gov (United States)

    Kako, Mayumi; Ranse, Jamie; Yamamoto, Aiko; Arbon, Paul

    2014-06-01

    An earthquake and tsunami hit the east coast of Japan on March 11, 2011. Nurses were actively involved in the health response to this disaster and, subsequently, many authors have reported on the role nurses played in these efforts in Japanese nursing professional journals. Aim To describe the role of nurses who assisted in the 2011 Great East Earthquake of Japan by reviewing Japanese literature and reporting the findings in English. This research used an integrative literature review methodology. Manuscripts were obtained from the Japanese database Ichushi Ver. 5 (Japan Medical Abstracts Society, Tokyo, Japan). A total of 44 manuscripts were identified and included in a thematic analysis. Three main themes were identified: (1) nursing roles, (2) specialized nursing roles, and (3) preparedness education. Nurses fulfilled different roles in the period after the disaster (ie, as a clinician, a communicator, a leader, and a provider of psychosocial support). Additionally, the specialized nurse role was identified, along with the need for preparedness education to support the nurse's role in a disaster. The understanding of the role of nurses in disasters is expanding. There is a need to further explore the roles of specialized nurses in disasters. Further disaster education opportunities should be available as a part of continuing education for all nurses. Radiation aspects of disaster assistance should be included in disaster education programs where there are radio-nuclear hazards present in the environment.

  10. Assisted reproductive technology in Japan: a summary report for 2015 by The Ethics Committee of The Japan Society of Obstetrics and Gynecology.

    Science.gov (United States)

    Saito, Hidekazu; Jwa, Seung Chik; Kuwahara, Akira; Saito, Kazuki; Ishikawa, Tomonori; Ishihara, Osamu; Kugu, Koji; Sawa, Rintaro; Banno, Kouji; Irahara, Minoru

    2018-01-01

    The Japan Society of Obstetrics and Gynecology (JSOG) implemented an assisted reproductive technology (ART) registry system in 1986. Here are reported the characteristics and treatment outcomes of ART cycles that were registered in 2015. JSOG has requested all participating ART facilities to register cycle-specific information for all ART cycles since 2007. A descriptive analysis was performed by using the registry database for 2015. In total, 424 151 cycles and 51 001 neonates (1 in 19.7 neonates born in Japan) were registered in 2015. The patients' mean age was 38.2 years (standard deviation = 4.5). Among the fresh cycles, 94 158 of 244 718 (38.5%) egg retrieval cycles were cycles with freeze-all embryos or oocytes, while fresh embryo transfer (ET) was performed in 70 254 cycles, signaling a decrease from 2014. There were 169 898 frozen-thawed ET cycles, resulting in 56 355 pregnancies and 40 599 neonates. Single ET was performed at a rate of 79.7% for fresh and 81.8% for frozen cycles and the singleton pregnancy/live birth rates were 96.9%/96.5% and 96.8%/96.4% for the respective cycles. The total ART cycles and live births resulting from ART has been increasing in Japan. Single ET was performed at a rate of almost 80% and ET cycles have shifted from fresh to frozen cycles.

  11. HTGR technology development in Japan advances so much. Leading world technology to global standards

    International Nuclear Information System (INIS)

    Ogawa, Masuro; Hino, Ryutaro; Kunitomi, Kazuhiko; Onuki, Kaoru; Inagaki, Yoshiyuki; Takeda, Tetsuaki; Sawa, Kazuhiro

    2007-01-01

    The JAEA has conducted research and development of HTGR for hydrogen production since 1969 and attained the operation of 950degC at reactor coolant outlet of the HTTR in 2004. This article describes present status and future plan of R and D in the area of HTGR technology and high temperature heat utilization and also introduces the design of the commercial HTGR cogeneration system based on R and D results leading to world standards. (T. Tanaka)

  12. Technological Pedagogical Content Knowledge - a review of the literature

    NARCIS (Netherlands)

    Voogt, Joke; Fisser, Petra; Pareja Roblin, N.N.; Tondeur, J.; van Braak, J.

    2013-01-01

    Technological Pedagogical Content Knowledge (TPACK) has been introduced as a conceptual framework for the knowledge base teachers need to effectively teach with technology. The framework stems from the notion that technology integration in a specific educational context benefits from a careful

  13. Technological Pedagogical Content Knowledge -- A Review of the Literature

    Science.gov (United States)

    Voogt, J.; Fisser, P.; Roblin, N. Pareja; Tondeur, J.; van Braak, J.

    2013-01-01

    Technological Pedagogical Content Knowledge (TPACK) has been introduced as a conceptual framework for the knowledge base teachers need to effectively teach with technology. The framework stems from the notion that technology integration in a specific educational context benefits from a careful alignment of content, pedagogy and the potential of…

  14. Organizational Culture: Technology Integration. Review of Literature and Data Gathering

    Science.gov (United States)

    Simpson, Selena E.

    2008-01-01

    Background: Communities of practice and technology integration within such communities requires much attention in the future of education and developing organizations. Purpose: To examine the effectiveness of technology integration and how communities of practice plays a role in the successful implementation of technology integration for teacher…

  15. Proceedings of the Japan-U.S. workshop P-118 on vacuum technologies for fusion devices

    International Nuclear Information System (INIS)

    Miyahara, A.

    1989-01-01

    Fusion community does not appreciate vacuum technologies to the same extent as accelerator community does. This is because, in the case of accelerators, in particular storage ring systems, the requirement of attaining ultrahigh vacuum in order to avoid collisional loss is well defined, on the other hand, it is not possible to define the requirement so precisely in the case of fusion devices. One of the reasons is that core plasma interacts with vessel wall so strongly and unpredictably that it becomes difficult to identify the role played by individual components. However, in the next step and the next generation machines like CIT, LHS, ITER, FER and NET, vacuum technologies would play more significant roles, because the CIT will introduce tritium in a vacuum vessel, and the aim of the ITER project is to demonstrate particle balance, namely, to achieve steady state operation with D-T fuel. The Japan-U.S. workshop P-118 was held at the Institute of Plasma Physics, Nagoya University, from August 1 to 5, 1988. 33 participants including 4 from the U.S. took part in the workshop. In the plenary session, 12 lectures were given, and also the topics-oriented session on pumping, gauging, remote maintenance, first wall, pump limiter, divertor and others was held. (K.I.)

  16. Bio-desulfurization technology in Japan; Wagakuni ni okeru baio datsuryu gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Maruhashi, K. [Petroleum Energy Center, Tokyo (Japan)

    2000-05-01

    A bio-reaction of microbes (catalytic reaction by an enzyme) is characterized in that the reaction is carried out at a normal temperature and under a normal pressure and has particularly high specificity with respect to substrate (reactant). It is considered that a low loading process of environment harmony type can be constructed by applying the bio-reaction in petroleum refinery process. CO{sub 2} exhaust and energy consumption in the bio-desulfurization (BDS) is estimated to be 70 to 80% lower than those in hydrodesulfurization (HDS). The bio-technologies that can be applied to the petroleum refinery process include, for example, desulfurization, demetallation, dewaxing, denitration, cracking and so on. In this paper, the present state of bio-desulphurization technology is introduced. Particularly, as the research results in Japan, acquirement of mesophile R.erythropolis KA2-5-1 strain, thermophile Paenibacillus sp. A11-2 strain whose optimum temperature is 50 degrees C, BT degradation fungus Rhodococcus sp. T09 and the like are introduced. (NEDO)

  17. Uranium mining and metallurgy library science and technology literature retrieval of network

    International Nuclear Information System (INIS)

    Tang Lilei

    2014-01-01

    This paper introduces the network resources and characteristics retrieve service of Beijing research Institute of Chemical Engineering of Metallurgy library, Analyzes the problems often encountered in the literature retrieval in science and technology, And puts forward the solution, Puts forward the thinking and Suggestions of science and technology literature retrieval. (author)

  18. Toxic shock syndrome due to community-acquired methicillin-resistant Staphylococcus aureus infection: Two case reports and a literature review in Japan.

    Science.gov (United States)

    Sada, Ryuichi; Fukuda, Saori; Ishimaru, Hiroyasu

    2017-01-01

    Community-acquired methicillin-resistant Staphylococcus aureus has been spreading worldwide, including in Japan. However, few cases of toxic shock syndrome caused by Community-acquired methicillin-resistant Staphylococcus aureus have been reported in Japan. We report 2 cases, in middle-aged women, of toxic shock syndrome due to Community-acquired methicillin-resistant Staphylococcus aureus via a vaginal portal of entry. The first patient had used a tampon and the second patient had vaginitis due to a cleft narrowing associated with vulvar lichen sclerosus. Both patients were admitted to our hospital with septic shock and severe acute kidney injury and subsequently recovered with appropriate antibiotic treatment. In our review of the literature, 8 cases of toxic shock syndrome caused by Community-acquired methicillin-resistant Staphylococcus aureus were reported in Japan. In these 8 cases, the main portals of entry were the skin and respiratory tract; however, the portal of entry of Community-acquired methicillin-resistant Staphylococcus aureus from a vaginal lesion has not been reported in Japan previously.

  19. Assisted reproductive technology in Japan: a summary report of 1992-2014 by the Ethics Committee, Japan Society of Obstetrics and Gynecology.

    Science.gov (United States)

    Irahara, Minoru; Kuwahara, Akira; Iwasa, Takeshi; Ishikawa, Tomonori; Ishihara, Osamu; Kugu, Koji; Sawa, Rintaro; Banno, Kouji; Saito, Hidekazu

    2017-04-01

    The Japan Society of Obstetrics and Gynecology implemented a registry report system for the clinical practice of assisted reproductive technology in 1986. The aggregated results from 1992 to 2014 are reported herein. The total number of registered treatments was 393 745 cycles, of which 66 550 were pregnancy cycles and 46 008 were cycles with a live birth. Compared to the number of registered treatments in 2008, when the cycle-based registry was newly introduced, there was a 2.07-fold increase in the total number of treatments and a 2.25-fold increase in the number of cycles with a live birth. As the average age of patients who receive assisted reproductive technology has become markedly higher year by year, the most common age of those patients who received assisted reproductive technology in 2014 was 40 years. The total numbers of both assisted reproductive technology treatments and assisted reproductive technology live births are likely to be higher in the future. In addition, the trend toward aging patients seems to be continuing into the future.

  20. Characteristics of the life habits of obese students at one of Japan's National Colleges of Technology.

    Science.gov (United States)

    Nagasawa, Yoshinori; Demura, Shin-Ichi; Shimada, Shigeru

    2017-05-17

    Aim This study clarified the characteristics of life habits of obese Japanese male students at the National Colleges of Technology, Japan. Materials and methods Healthy students aged 15-19 years answered a questionnaire containing 21 items on the following five categories of life habits: general exercise, meals, sleeping, leisure activity and illness or injury history. The subjects were divided into three groups based on the criteria of body mass index (BMI) and body fat percentage (%BF): non-obese (%BF time, bedtime and amount of time spent walking, sleeping and watching TV per day were examined using one-way analysis of variance (ANOVA) and chi-square tests for each item. Results The overweight obese and hidden obese groups engaged in less exercise time, were more likely to eat until they were full at meals and were less likely to eat between meals or late at night than the non-obese group. In addition, the non-obese group had significantly later waking times and significantly less TV-watching time than the overweight obese group. There were no significant differences with respect to leisure activity and illness or injury history among the three groups. Many students in all groups had regular waking times and were not performing any leisure activities. Conclusion The findings suggest that obese students may need further guidance to help them maintain a healthy life and appropriate weight.

  1. The research and implementation of nuclear science and technology literature processing system based on smart client technology

    International Nuclear Information System (INIS)

    Zhang Shufeng

    2010-01-01

    Nuclear literature processing, namely cataloging, subject indexing and abstracting, is one of the highly specialized work, the quality and speed of literature processing have an important impact on the building of information resources in nuclear field. Firstly, the system's overall functionality was determined through the analysis of system requirements and the difficulties we meet with were pointed out. Secondly, the function of collaborative collecting and processing of nuclear literature is realized using smart client technology, achieve the purpose of providing a network platform to the literature processing specialists located in different places, therefore the out source of nuclear literature collecting and processing can be done. The article comprises three aspects: needs analysis and overall functional design, smart client technical presentations, Net platform based on smart client technology, nuclear literature processing system implementation. (author)

  2. Development of remote handling technology for nuclear fuel cycle facilities in Japan

    International Nuclear Information System (INIS)

    Maekawa, Hiromichi; Sakai, Akira; Miura, Noriaki; Kozaka, Tetsuo; Hamada, Takashi

    2015-01-01

    Remote handling technology has been systematically developed for nuclear fuel cycle facilities in Japan since 1970s, primarily in parallel with the development of reprocessing and HLLW (High Level Liquid Waste) vitrification process. In case of reprocessing and vitrification process to handle highly radioactive and hazardous materials, the most of components are installed in the radiation shielded hot cells and operators are not allowed to enter the work area in the cells for operation and maintenance. Therefore, a completely remote handling system is adopted for the cells to reduce radiation doses of operators and increase the availability of the facility. The hot cells are generally designed considering the scale of components (laboratory, demonstration, or full-scale), the function of the systems (chemical process, material handling, dismantling, decontamination, or chemical analysis), and the environmental conditions (radiation dose rate, airborne concentration, surface contamination, or fume/mist/dust). Throughout our domestic development work for remote handling technology, the concept of the large scale integrated cell has been adopted rather than a number of small scale separated cells, for the reasons to reduce the total installation space and the number of remote handling equipment required for the each cell as much as possible. In our domestic remote maintenance design, several new concepts have been developed, tested, and demonstrated in the Tokai Virtrification Facility (TVF) and the Rokkasho HLLW Vitrification and Storage Facility (K-facility). Layout in the hot cells, the performance of remote handling equipment, and the structure of the in-cell components are important factors for remote maintenance design. In case of TVF (hot tests started in 1995), piping and vessels are prefabricated in the rack modules and installed in two lines on both sides of the cell. These modules are designed to be remotely replaced in the whole rack. Two overhead cranes

  3. Information Technology in Facilities Management - A Literature Review

    DEFF Research Database (Denmark)

    Ebbesen, Poul

    2015-01-01

    Purpose : The aim of this paper is to present the state of the art of research in Information Technology (IT) in Facilities Management (FM). Background : Initial studies indicate that investments into IT in FM often do not add the expected value, neither to the FM department itself nor...

  4. Dr Hiroshi Ikukawa Director Planning and Evaluation Division Science and Technology Policy Bureau Ministry of Education, Culture, Sports, Science and Technology (MEXT) of Japan and Mr Robert Aymar signed an accord for the CERN.

    CERN Multimedia

    Claudia Marcelloni

    2007-01-01

    Dr Hiroshi Ikukawa Director Planning and Evaluation Division Science and Technology Policy Bureau Ministry of Education, Culture, Sports, Science and Technology (MEXT) of Japan and Mr Robert Aymar signed an accord for the CERN.

  5. Current developments and clinical applications of bubble technology in Japan: a report from 85th Annual Scientific Meeting of The Japan Society of Ultrasonic in Medicine, Tokyo, 25-27 May, 2012.

    Science.gov (United States)

    Achmad, Arifudin; Taketomi-Takahashi, Ayako; Tsushima, Yoshito

    2013-06-01

    The potentials of bubble technology in ultrasound has been investigated thoroughly in the last decade. Japan has entered as one of the leaders in bubble technology in ultrasound since Sonazoid (Daiichi Sankyo & GE Healthcare) was marketed in 2007. The 85th Annual Scientific Meeting of The Japan Society of Ultrasonics in Medicine held in Tokyo from May 25 to 27, 2012 is where researchers and clinicians from all over Japan presented recent advances and new developments in ultrasound in both the medical and the engineering aspects of this science. Even though bubble technology was originally developed simply to improve the conventional ultrasound imaging, recent discoveries have opened up powerful emerging applications. Bubble technology is the particular topic to be reviewed in this report, including its mechanical advances for molecular imaging, drug/gene delivery device and sonoporation up to its current clinical application for liver cancers and other liver, gastrointestinal, kidney and breast diseases.

  6. Design and technology development of solid breeder blanket cooled by supercritical water in Japan

    Science.gov (United States)

    Enoeda, M.; Kosaku, Y.; Hatano, T.; Kuroda, T.; Miki, N.; Honma, T.; Akiba, M.; Konishi, S.; Nakamura, H.; Kawamura, Y.; Sato, S.; Furuya, K.; Asaoka, Y.; Okano, K.

    2003-12-01

    This paper presents results of conceptual design activities and associated R&D of a solid breeder blanket system for demonstration of power generation fusion reactors (DEMO blanket) cooled by supercritical water. The Fusion Council of Japan developed the long-term research and development programme of the blanket in 1999. To make the fusion DEMO reactor more attractive, a higher thermal efficiency of more than 40% was strongly recommended. To meet this requirement, the design of the DEMO fusion reactor was carried out. In conjunction with the reactor design, a new concept of a solid breeder blanket cooled by supercritical water was proposed and design and technology development of a solid breeder blanket cooled by supercritical water was performed. By thermo-mechanical analyses of the first wall, the tresca stress was evaluated to be 428 MPa, which clears the 3Sm value of F82H. By thermal and nuclear analyses of the breeder layers, it was shown that a net TBR of more than 1.05 can be achieved. By thermal analysis of the supercritical water power plant, it was shown that a thermal efficiency of more than 41% is achievable. The design work included design of the coolant flow pattern for blanket modules, module structure design, thermo-mechanical analysis and neutronics analysis of the blanket module, and analyses of the tritium inventory and permeation. Preliminary integration of the design of a solid breeder blanket cooled by supercritical water was achieved in this study. In parallel with the design activities, engineering R&D was conducted covering all necessary issues, such as development of structural materials, tritium breeding materials, and neutron multiplier materials; neutronics experiments and analyses; and development of the blanket module fabrication technology. Upon developing the fabrication technology for the first wall and box structure, a hot isostatic pressing bonded F82H first wall mock-up with embedded rectangular cooling channels was

  7. Tinea faciei caused by Trichophyton mentagrophytes (molecular type Arthroderma benhamiae ) mimics impetigo : a case report and literature review of cases in Japan.

    Science.gov (United States)

    Kimura, Utako; Yokoyama, Kae; Hiruma, Masataro; Kano, Rui; Takamori, Kenji; Suga, Yasushi

    2015-01-01

    A 36-year-old female elementary schoolteacher presented with aggregated serous papules surrounded by mild erythema, extending from both nasal wings/nostrils down to the upper lip. No improvement was seen following treatment of the lesions with topical antibiotics for impetigo. Potassium hydroxide (KOH) direct microscopy confirmed the presence of mycelia, and the infection was diagnosed as tinea faciei. The isolate was identified as Trichophyton mentagrophytes using morphological analysis and as Arthroderma benhamiae using genetic analysis. Here we describe that case and summarize the clinical features of other cases of A. benhamiae infection in Japan that have been reported in the literature.

  8. Development of FR fuel cycle in japan (1) development scope of fuel cycle technology

    International Nuclear Information System (INIS)

    Nakamura, H.; Funasaka, H.; Namekawa, T.

    2008-01-01

    A fast reactor (FR) cycle has a potential to realize a sustainable energy supply system that is harmonized with environment by fully recycling both uranium (U) and transuranium (TRU) elements. In Japan, a Feasibility Study on Commercialized FR Cycle Systems (FS) was launched in July 1999, and through two different study phases, a final report was presented in 2006. As a result of FS, a combined system of sodium-cooled FR with mixed-oxide (MOX) fuel, advanced aqueous reprocessing and simplified pelletizing fuel fabrication was considered to be most promising for commercialization. The advanced aqueous reprocessing system, which is called the New Extraction system for TRU recovery (NEXT), consists of a U crystallization process for the bulk of U recovery, a simplified solvent extraction process for residual U, plutonium (Pu) and neptunium (Np) without Pu partitioning and purification, and a process for recovering americium (Am) and curium (Cm) from the raffinate. The ratio of Pu/U concentration in the mother solution after crystallization is adequate for MOX fuel fabrication, and thus complicated powder mixing processes for adjusting Pu content in MOX fuel can be eliminated in the subsequent simplified fuel fabrication system. In this system, lubricant-mixing process can also be eliminated by adopting the advanced technology in which lubricant is coated on the inner surface of a die before fuel powder supply. Such a simplification could help us overcoming the difficulty to treat MA bearing fuel powders in a hot cell. Ministry of Education, Culture, Sports, Science and Technology (MEXT) reviewed these results of FS in 2006 and identified the most promising FR cycle concept proposed in the FS phase II study as a mainline choice for commercialization. According to such a governmental assessment, R and D activities of FR cycle systems were decided to be concentrated mainly to the innovative technology development for the mainline concept. The stage of R and D project was

  9. The Participation to The All Japan College of Technology Design Competition and The Trial of Art and Design Education

    Science.gov (United States)

    Takeshita, Junji; Kato, Kenji

    In the 2nd All Japan College of Technology Design Competition, the students majoring department of architecture (included architecture course in advanced course of Architecture and Civil Engineering) of Toyota National College of Technology won the highest award in all 3 sections of the held competition. In this paper, 2 sections of design course in awarded 3 sections was taken up. In addition, while reporting the circumstances and measure to the competition participation, the revision of a molding subject performed in recent years and the relation of this winning-a-prize result were considered.

  10. Technology and its ethics in nursing and caring journals: An integrative literature review.

    Science.gov (United States)

    Korhonen, Eila-Sisko; Nordman, Tina; Eriksson, Katie

    2015-08-01

    Over the past 20 years, the impact of technology has increased significantly in health care. The diversity of technology is growing and its knowledge scattered. The concept of technology is ambiguous in caring and nursing sciences and its ethics remains unidentified. To find evidence on how the concept of technology and its ethics are defined in caring and nursing sciences and practice. The purpose of this study is to describe and summarize the concept of technology and its ethics in the past nursing and caring literature. The integrative literature review of the past nursing and caring literature. The data were collected from caring and nursing journal articles from 2000 to 2013 focusing on technology and its ethics.The results were summarized and themed. Technology as a concept has three implications. First, technology is devices and products, including ICT and advanced, simple and assistive technology. Second, technology refers to a process consisting of methods for helping people. Third, technology as a service indicates the production of care by technology. The ethics of technology has not been established as a guiding principle. Some studies excluded ethical reflection completely. Many studies discussed the ethics of technology as benefits such as improved communication and symptoms management, and the simple use of e-health services whilst others remained critical presenting ethical problems such as unwillingness and the inability to use technology, or conflicts with human aspects or questions of inequality. In conclusion, this study indicates that technology as a concept is described diversely. The relation between technology and ethics is not a truism. Despite some evidence, more is needed to promote ethical care when using technology. © The Author(s) 2014.

  11. Counselling users of hearing technology: a comprehensive literature review.

    Science.gov (United States)

    Meibos, Alex; Muñoz, Karen; Schultz, Jared; Price, Tanner; Whicker, John J; Caballero, Ana; Graham, Laurel

    2017-12-01

    The purpose of this review is to determine the scope of peer-reviewed empirical research related to counselling in audiology with patients using hearing technology and to identify limitations and gaps to guide recommendations for future research. A rapid evidence assessment was used to identify relevant articles for the review. Eighteen articles met the inclusion criteria. Three themes were identified: (1) audiologist counselling perspectives, (2) counselling communication trends in practice and (3) audiologist experiences with professional training and reported patient outcomes. Findings revealed audiologists are more confident providing information than counselling that addresses adjustment aspects, and other communication gaps have been observed. There is limited research related to counselling in audiology. Audiologists continue to report a need for more training in counselling in their graduate programmes. Additional research is needed to determine effective ways to implement counselling in practice and to improve graduate student supervision for the development of counselling competencies and confidence in using skills in practice.

  12. Changes in Mothers' Psychosocial Perceptions of Technology-dependent Children and Adolescents at Home in Japan: Acknowledgement of Children's Autonomy

    Directory of Open Access Journals (Sweden)

    Kaori Nishigaki, RN, PHN, PhD

    2016-06-01

    Conclusions: First, mothers gradually accepted the conditions of their child after his/her disease and disability were known. Second, others managed technology-required care and concurrently considered the social participation of their child through daily care at home. Third, the level of preoccupation with the child was affected by the mothers' management of care and their attitude towards the social participation of their child in home care. In this study, as is widely alleged in historical recognition of Japan, mothers provided daily care almost without help from other family members. Additionally, they thought it natural and good for their children. Above all, especially in Japan, professional support for mothers are necessary so that they can take breaks from care.

  13. Information technology for sustainable supply chain management: a literature survey

    Science.gov (United States)

    Thöni, Andreas; Tjoa, A. Min

    2017-07-01

    In supply chain management (SCM), two topics have gained importance over the last years. On the one hand, sustainable SCM (SSCM) has become increasingly relevant and many publications have contributed to the topic. On the other hand, information technology (IT) is being progressively considered as a key enabler for efficiency in supply chains. Several research efforts have contributed to the field of IT for SSCM. However, this paper is the first recent attempt to summarise the current state of the art of how IT can affect SSCM in any structured way and to compare it with IT for 'general' SCM to give guidance for future research. This paper surveys 55 peer-reviewed articles that were retrieved through keyword searches (until May 2014). The analysis identifies research deficits as well as a lack of scientific discourse employing empirical techniques and a lack of investigations on the social sustainability. Additionally, possible topics for further research were derived by comparing the survey's results with the current research on IT for 'general' SCM following the analysis of 631 articles. Six fields could be identified, namely output/effects of IT, machine communication and multiagents, inputs and IT-supported processing, IT-enabled interorganisational exchange, quantitative IT approaches and a sector focus.

  14. Impacts of Online Technology Use in Second Language Writing: A Review of the Literature

    Science.gov (United States)

    Lin, Show Mei; Griffith, Priscilla

    2014-01-01

    This article reviews the literature on computer-supported collaborative learning in second language and foreign language writing. While research has been conducted on the effects of online technology in first language reading and writing, this article explores how online technology affects second and foreign language writing. The goal of this…

  15. Development of grouting technologies for geological disposal of high level waste in Japan (1). Overall program and application of developed technologies

    International Nuclear Information System (INIS)

    Fujita, Tomoo; Sasamoto, Hiroshi; Sugita, Yutaka; Matsui, Hiroya

    2013-01-01

    The Japan Atomic Energy Agency started a grout project for geological disposal of high-level radioactive waste (HLW) in 2007. The aim of the project was to develop new grouting technologies and grout materials and also to develop models for performance assessments, prediction of the long-term radionuclide migration and identify detrimental changes in the host rock by the grout material leachate. This study presents the overall program and the application of key engineering technologies to the construction and operation of an underground facility for the geological disposal of HLW, with particular emphasis on the long-term effects of grout materials. (author)

  16. Current status of nuclear power generation in Japan and directions in water cooled reactor technology development

    International Nuclear Information System (INIS)

    Miwa, T.

    1991-01-01

    Electric power demand aspects and current status of nuclear power generation in Japan are outlined. Although the future plan for nuclear power generation has not been determined yet the Japanese nuclear research centers and institutes are investigating and developing some projects on the next generation of light water reactors and other types of reactors. The paper describes these main activities

  17. Historical overview of the synchrotron radiation research in Japan. From the view point of creative works in the development of light sources and related technology

    International Nuclear Information System (INIS)

    Kamitsubo, Hiromichi

    2007-01-01

    Synchrotron radiation research in Japan started in early 1960's when the first electron synchrotron was commissioned at the Institute of Nuclear Study (INS), University of Tokyo (UT). This review covers the parasite use of the INS electron synchrotron and research works done at the light sources in Japan such as SOR-RING, Photon Factory (KEK-PF) Accumulator Ring (KEK-AR), and SPring-8. History of synchrotron radiation research in Japan was overviewed by paying attention to the creative works in the development of light sources and related technology, as well as the pioneering works on the development of experimental techniques and methods. At present there are more than ten synchrotron radiation sources are in operation and the number of their users, especially users from industries in Japan is increasing very rapidly and the research fields of users are also developing. Accordingly the synchrotron radiation facility becomes more and more indispensable facility in the society in Japan. (author)

  18. Seismic Observation in Deep Boreholes and Its Applications - Workshop Proceedings, Niigata Institute of Technology, Kashiwazaki, Japan

    International Nuclear Information System (INIS)

    2014-01-01

    The Kashiwazaki WS was held to develop the recommendations made at the Tsukuba WS entitled 'Seismic Input Motions Incorporating Recent Geological Studies' which was held in November 2004 in Tsukuba City in Japan (hereinafter, the 'Tsukuba WS'). At the Tsukuba WS, the state of the art in defining realistic seismic input for the design and re-evaluation of nuclear facilities as well as advances in seismic source characterization of fault zones using data from deep geological investigations and their possible contribution to improving seismic input definitions were reviewed. Further, the importance and necessity of cooperation between seismology and geology in order to decrease uncertainty in seismic input definition were emphasized. After the Tsukuba WS, the Niigata-ken Chuetsu-oki Earthquake (NCOE, M=6.8) occurred near the Kashiwazaki-Kariwa NPP site. In this earthquake, a focusing effect of ground motion was observed at the Kashiwazaki-Kariwa NPP site, which caused locally amplified ground motion. Units 1 and 2 showed significantly higher responses of more than 50 percent compared to Units 3 to 7. This was thought to be caused by the fact that seismic waves were focused on Units 1 and 2 due to the irregular structure under the site. A similar effect was observed at the Hamaoka site in the earthquake that occurred in Suruga Bay in 2009. Only Unit 5 showed a double or larger response to this earthquake, and similar phenomena were found only for events with hypocenter in the narrow direction from the site. This was also thought to be caused by the irregular geological structure under the site. In the 2011 off the Pacific Coast of Tohoku Earthquake, the peak ground accelerations (PGA) of the Dai-ichi NPP site were about twice as large as those of the Dai-ni NPP site, although the distance between these sites is only slightly more than 10 km. Further, large differences in the PGAs were found among each of the units of the Dai-ichi NPP site. For example, the PGA of Unit

  19. [Assessment of an educational technology in the string literature about breastfeeding].

    Science.gov (United States)

    de Oliveira, Paula Marciana Pinheiro; Pagliuca, Lorita Marlena Freitag

    2013-02-01

    The goal of this study was to assess educational technology in the string literature about breastfeeding. The study was conducted between March and September 2009 by breastfeeding experts and experts on string literature. A psychometric model was adopted as the theoretical-methodological framework. For data collection, an instrument was used to assess the content about breastfeeding and the string literature rules. The analysis was based on comparisons of the notes and critical reflections of experts. Ethical guidelines were followed during the study. After the assessments, the educational technology was adjusted until all of the experts agreed. The assessment of educational technology can reduce obstacles to information dissemination and can lead to improvements in quality of life.

  20. Seven Years after the Manifesto: Literature Review and Research Directions for Technologies in Animal Computer Interaction

    Directory of Open Access Journals (Sweden)

    Ilyena Hirskyj-Douglas

    2018-06-01

    Full Text Available As technologies diversify and become embedded in everyday lives, the technologies we expose to animals, and the new technologies being developed for animals within the field of Animal Computer Interaction (ACI are increasing. As we approach seven years since the ACI manifesto, which grounded the field within Human Computer Interaction and Computer Science, this thematic literature review looks at the technologies developed for (non-human animals. Technologies that are analysed include tangible and physical, haptic and wearable, olfactory, screen technology and tracking systems. The conversation explores what exactly ACI is whilst questioning what it means to be animal by considering the impact and loop between machine and animal interactivity. The findings of this review are expected to form the first grounding foundation of ACI technologies informing future research in animal computing as well as suggesting future areas for exploration.

  1. Community Geothermal Technology Program: Cloth dyeing by geothermal steam. An experiment in technology transfer from Japan to Hawaii, Final report

    Energy Technology Data Exchange (ETDEWEB)

    Furumoto, A.S.

    1987-12-31

    This was an experiment to test whether cloth dyeing using geothermal steam (already proven in Japan) would be feasible in Hawaii. Results: Using a fabricated steam vat, cotton, silk, and synthetic can be dyed; the resulting material received high grades for steadfastness and permanency under dye testing. Techniques that were successful in Matsukawa, were replicated in Puna. However, attempts to embed leaf patterns on cloth using natural leaves and to extract natural dyes from Hawaiian plants were unsuccessful; the color of natural dyes deteriorated in hours. But chemical dyes gave brilliant hues or shades, in contrast to those in Japan where the steam there gave subdued tones. It is concluded that geothermal dyeing can be a viable cottage industry in Puna, Hawaii.

  2. Mobile technology in nursing education: where do we go from here? A review of the literature.

    Science.gov (United States)

    Raman, Janet

    2015-05-01

    The International Council of Nurses (ICN), Sigma Theta Tau International Honor Society of Nursing (STTI), and many National Nurses Associations (NNAs), have called for the integration of information technology into nursing curriculums to prepare nursing students for the current practice environment which requires access to large amounts of information to provide evidence-based patient care. Nurse educators have begun to address the integration of technology in nursing curriculum, but are the available tools, in particular, mobile devices loaded with informational applications, being maximized? Literature Review Aims The aims of this literature review are to 1) explore the literature written on the use of mobile technology in nursing education; 2) methodically discuss the benefits and concerns involved in using mobile technology in nursing education; and 3) consider strategies for enhancing the use of mobile technology in nursing education. Review Methods A search was conducted on the use of mobile technology in nursing programs in Academic Search Complete, Cumulative Index of Nursing and Allied Health Literature (CINAHL), Medline with Full Text, and Medline Journals. Seventeen studies, published within the last five years in peer-reviewed journals regarding the mobile technology in nursing programs were identified. Findings Although many nursing programs have implemented the use of mobile technology in the clinical, classroom, and laboratory settings, more work needs to be done to overcome the concerns related to: cost, lack of IT support, lack of faculty acceptance and role-modeling, lack of structured assignments and/or activities designed to encourage the implementation of mobile devices; and constraints on their use in clinical settings. While much has been done to incorporate the use of mobile technology in nursing curriculum, nurse educators are encouraged to develop strategies to overcome the concerns noted. Possible strategies to overcome the concerns are

  3. Development of Maglev and linear drive technology for transportation in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Masada, Eisuke [Tokyo Univ. (Germany)

    1996-12-31

    In order to realise guided ground transportation systems with superspeed, better riding comforts and environmental effects two types of maglev transports, JR-Maglev and HSST have been developed since 20 years in Japan. JR-Maglev is bases on a electro-dynamic suspension system and driven by long-stator linear synchronous motors. HSST is an electromagnetic suspension system with short-stator linear induction motor. Both systems are presented. (HW)

  4. THE INFORMATION TECHNOLOGY AND COMMUNICATION USED BY LOGISTICS SERVICE PROVIDERS: LITERATURE REVIEW

    Directory of Open Access Journals (Sweden)

    Carolina Luisa dos Santos Vieira

    2012-10-01

    Full Text Available With the growth in the supply of logistics services, and the increase of competition, the use of information and communication technologies (ICT is now considered by logistics service providers (LSP, a source of competitive advantage. Through a literature review, this paper seeks to identify which technologies have been used by the PSL. Analyzing 47 articles on the subject, published in international journal that has the largest number of works on PSL, applications of technologies by PSL were analyzed according to a taxonomy suggested based on literature - software, hardware and networks. Among the results highlight the technologies cited by categories and greater scientific interest, such as EDI, RFID, TTS, WMS and Internet.

  5. Changes in Mothers' Psychosocial Perceptions of Technology-dependent Children and Adolescents at Home in Japan: Acknowledgement of Children's Autonomy.

    Science.gov (United States)

    Nishigaki, Kaori; Kanamori, Yutaka; Ikeda, Mari; Sugiyama, Masahiko; Minowa, Hideko; Kamibeppu, Kiyoko

    2016-06-01

    This research was conducted to reveal Japanese mothers' changing perceptions towards their technology-dependent children in the home care setting. Fourteen Japanese mothers participated in semi-structured interviews, which were analyzed using a grounded theory approach. "Degree of preoccupation with the child" emerged as the category representing the mothers' perceptions towards their child. Three categories emerged that represented the progression of maternal perceptions over time: "accepting the child's conditions", "mastering the management of care in various conditions", and "considering social participation for the child". First, mothers gradually accepted the conditions of their child after his/her disease and disability were known. Second, others managed technology-required care and concurrently considered the social participation of their child through daily care at home. Third, the level of preoccupation with the child was affected by the mothers' management of care and their attitude towards the social participation of their child in home care. In this study, as is widely alleged in historical recognition of Japan, mothers provided daily care almost without help from other family members. Additionally, they thought it natural and good for their children. Above all, especially in Japan, professional support for mothers are necessary so that they can take breaks from care. Copyright © 2016. Published by Elsevier B.V.

  6. Establishment of technological basis for fabrication of U-Pu-Zr ternary alloy fuel pins for irradiation tests in Japan

    International Nuclear Information System (INIS)

    Kikuchi, Hironobu; Iwai, Takashi; Nakajima, Kunihisa; Arai, Yasuo; Nakamura, Kinya; Ogata, Takanari

    2011-01-01

    A high-purity Ar gas atmosphere glove box accommodating injection casting and sodium-bonding apparatuses was newly installed in the Plutonium Fuel Research Facility of Oarai Research and Development Center, Japan Atomic Energy Agency, in which several nitride and carbide fuel pins were fabricated for irradiation tests. The experiences led to the establishment of the technological basis of the fabrication of U-Pu-Zr alloy fuel pins for the first time in Japan. After the injection casting of the U-Pu-Zr alloy, the metallic fuel pins were fabricated by welding upper and lower end plugs with cladding tubes of ferritic-martensitic steel. Subsequent to the sodium bonding for filling the annular gap region between the U-Pu-Zr alloy and the cladding tube with the melted sodium, the fuel pins for irradiation tests are inspected. This paper shows the apparatuses and the technological basis for the fabrication of U-Pu-Zr alloy fuel pins for the irradiation test planned at the experimental fast test reactor Joyo. (author)

  7. Comparative study of linkage between environmental policy instruments and technological innovation: Case study on end-of-life vehicles technologies in Japan and EU.

    Science.gov (United States)

    Singh, Rajeev Kumar; Yabar, Helmut; Nozaki, Noriko; Niraula, Baburam; Mizunoya, Takeshi

    2017-08-01

    A growing population and urbanization is a challenge for finite natural resources. Without strict regulation to recycle, recover and reuse resources, waste is discarded with no value. Every year throughout the world, more than twenty-five million vehicles turn into end-of-life vehicles (ELV) and most of their valuable resources end up in landfill sites. This research analyses the effect of regulation on ELV innovation for additional recovery of resources in Japan and EU nations using patent data as a proxy. The analysis determines the statistical difference in patent activity before and after regulations were enacted in the case studies. The relevant data on ELV technologies was gathered for the period 1985-2013. The study suggests that in general environmental regulation in Japan drove innovation and reveals that environmental policy in Japan was more effective in enabling innovation compared to EU nations. Specifically, the results from these developed countries can be used by the rapidly growing developing countries in automobile manufacturing like China for amendment of their ELV regulation accordingly. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Isoinertial technology for rehabilitation and prevention of muscle injuries of soccer players: literature review

    OpenAIRE

    Prieto-Mondragón, Laura del Pilar; Camargo-Rojas, Diana Alexandra; Quiceno, Christian Alexander

    2016-01-01

    Abstract Introduction: Soccer is the sport with the highest risk of muscle injury for players. Eccentric exercise is fundamental for reducing injury rates and isoinertial technology devices cause an increase in eccentric demands after a concentric contraction. Objective: To identify the use of isoinertial technology in the fields of physical activity and sports for rehabilitation and prevention of muscle injuries reported in scientific literature. Materials and methods: A search of scienti...

  9. Social media and digital technology use among Indigenous young people in Australia: a literature review

    OpenAIRE

    Rice, Emma S.; Haynes, Emma; Royce, Paul; Thompson, Sandra C.

    2016-01-01

    Introduction The use of social media and digital technologies has grown rapidly in Australia and around the world, including among Indigenous young people who face social disadvantage. Given the potential to use social media for communication, providing information and as part of creating and responding to social change, this paper explores published literature to understand how Indigenous Australian youth use digital technologies and social media, and its positive and negative impacts. Metho...

  10. Technology-assisted education in graduate medical education: a review of the literature

    OpenAIRE

    Jwayyed, Sharhabeel; Stiffler, Kirk A; Wilber, Scott T; Southern, Alison; Weigand, John; Bare, Rudd; Gerson, Lowell W

    2011-01-01

    Studies on computer-aided instruction and web-based learning have left many questions unanswered about the most effective use of technology-assisted education in graduate medical education. Objective We conducted a review of the current medical literature to report the techniques, methods, frequency and effectiveness of technology-assisted education in graduate medical education. Methods A structured review of MEDLINE articles dealing with "Computer-Assisted Instruction," "Internet or World W...

  11. The subject to emotional intelligence training of changes of emotional intelligence research, and adolescence of Japan seen from overseas literature

    OpenAIRE

    中島, 正世; Nakajima, Masayo

    2015-01-01

    In this paper, the author have revealed the transition about the concept of emotional intelligence from overseas literature, and have tried to clarify the subject to the definition of emotional intelligence, the difference from similar concepts, the measuring method of emotional intelligence, the related element of emotional intelligence, and emotional intelligence training for the man-power development to current adolescence. As a result, the base element which constitutes emotional intellig...

  12. A Literature Review: The Effect of Implementing Technology in a High School Mathematics Classroom

    Science.gov (United States)

    Murphy, Daniel

    2016-01-01

    This study is a literature review to investigate the effects of implementing technology into a high school mathematics classroom. Mathematics has a hierarchical structure in learning and it is essential that students get a firm understanding of mathematics early in education. Some students that miss beginning concepts may continue to struggle with…

  13. Employment factors for wind and solar energy technologies: A literature review

    NARCIS (Netherlands)

    Cameron, L.; van der Zwaan, B.

    2015-01-01

    In this paper we present an up-to-date literature review on employment opportunities associated with the deployment of renewable energy technology. We identified approximately 70 studies and data sources published over the past decade that report analysed or observed employment impacts of renewable

  14. Educational Online Technologies in Blended Tertiary Environments: A Review of Literature

    Science.gov (United States)

    Tuapawa, Kimberley N.

    2013-01-01

    This is a review of the literature surrounding five popular media-rich educational online technologies (EOTs) currently being used by educationalists to support blended learning within tertiary environments. This review considers the following EOTs: 1) connective media, 2) interactive gaming, 3) virtual worlds, 4) web conferencing and 5) learning…

  15. Signature Pedagogy: A Literature Review of Social Studies and Technology Research

    Science.gov (United States)

    Beck, Dennis; Eno, Jenni

    2012-01-01

    A literature review of 121 peer-reviewed articles, books, and conference proceedings was conducted to determine the signature pedagogies of social studies education and technology integration. The authors found that the signature social studies pedagogy is based on two primary instructional models: direct-instruction and inquiry-based,…

  16. The use of advanced medical technologies at home : A systematic review of the literature

    NARCIS (Netherlands)

    ten Haken, Ingrid; Allouch, Somaya Ben; van Harten, Willem H.

    2018-01-01

    Background: The number of medical technologies used in home settings has increased substantially over the last 10-15 years. In order to manage their use and to guarantee quality and safety, data on usage trends and practical experiences are important. This paper presents a literature review on

  17. Preparing Teachers for Technology Integration: Programs, Competencies, and Factors from the Literature

    Science.gov (United States)

    Oliver, Kevin; Townsend, Latricia

    2013-01-01

    This article presents a review of recent literature about preparing teachers for technology integration. The review found six types of training programs are commonly implemented: pre-service training, long-term courses, short-term workshops and institutes, coaching/mentoring, learning communities, and product/assessment approaches. The review…

  18. Present conditions of the water reactor technology sophistication programme in Japan

    International Nuclear Information System (INIS)

    Miwa, T.

    1989-01-01

    The Advanced Standardization Programme of LWR's was organized in Japan in 1975 in several phases. The first and the second phases (1975-1977 and 1978-1980 respectively) have obtained the goal of improved reliability and reduction of occupational exposure. The third phase (1981-1985) has carried out the development of 1300 MWe class LWRs (A-BWR and A-PWR) to achieve a higher level of reliability, reduction of occupational exposure and higher economic efficiency. This paper gives a brief summary description of the above mentioned programmes. 1 tab

  19. Advanced manufacturing technology effectiveness: A review of literature and some issues

    Science.gov (United States)

    Goyal, Sanjeev; Grover, Sandeep

    2012-09-01

    Advanced manufacturing technology (AMT) provides advantages to manufacturing managers in terms of flexibility, quality, reduced delivery times, and global competitiveness. Although a large number of publications had presented the importance of this technology, only a few had delved into related literature review. Considering the importance of this technology and the recent contributions by various authors, the present paper conducts a more comprehensive review. Literature was reviewed in a way that will help researchers, academicians, and practitioners to take a closer look at the implementation, evaluation, and justification of the AMT. The authors reviewed various papers, proposed a different classification scheme, and identified certain gaps that will provide hints for further research in AMT management.

  20. The current status of the development of the technology on 3D computer simulation in Japan

    International Nuclear Information System (INIS)

    Kim, Hee Reyoung; Park, Seung Kook; Chung, Un Soo; Jung, Ki Jung

    2002-05-01

    The development background and property of the COSIDA, which is the 3D computer simulation system for the analysis on the dismantling procedure of the nuclear facilities in Japan was reviewed. The function of the visualization on the work area, Kinematics analysis and dismantling scenario analysis, which are the sub systems of the COSIDA, has been investigated. The physical, geometrical and radiological properties were modelled in 2D or 3D in the sub system of the visualization of the work area. In the sub system of the kinematics analysis, the command set on the basic work procedure for the control of the motion of the models at a cyber space was driven. The suitability of the command set was estimated by the application of COSIDA to the programming on the motion of the remote dismantling tools for dismantling the components of the nuclear facilities at cyber space

  1. History of establishment of scientific technology law focused on exchanges of Korea, China and Japan

    International Nuclear Information System (INIS)

    Lee, Gyeong Hui

    1990-10-01

    This book introduces science and technology promotion related law, industrial technology related law, resources and energy related law, nuclear energy related law, information and communication related law, intellectual property right related law, and environment related law. It explains process of development of 7 laws in threes countries and relations of three countries exchanges. It also covers special law for science and technology innovation, electric utility law, petroleum enterprise law, telecommunication related law, law of settlement of digital divide, and information-oriented law.

  2. Role development of nurses for technology-dependent children attending mainstream schools in Japan.

    Science.gov (United States)

    Shimizu, Fumie; Suzuki, Machiko

    2015-04-01

    To describe the role development of nurses caring for medical technology-dependent children attending Japanese mainstream schools. Semi-structured interviews with 21 nurses caring for technology-dependent children were conducted and analyzed using the modified grounded theory approach. Nurses developed roles centered on maintaining technology-dependent children's physical health to support children's learning with each other, through building relationships, learning how to interact with children, understanding the children and the school community, and realizing the meaning of supporting technology-dependent children. These findings support nurses to build relationships of mutual trust with teachers and children, and learn on the job in mainstream schools. © 2015, Wiley Periodicals, Inc.

  3. The use of advanced medical technologies at home: a systematic review of the literature.

    Science.gov (United States)

    Ten Haken, Ingrid; Ben Allouch, Somaya; van Harten, Wim H

    2018-02-26

    The number of medical technologies used in home settings has increased substantially over the last 10-15 years. In order to manage their use and to guarantee quality and safety, data on usage trends and practical experiences are important. This paper presents a literature review on types, trends and experiences with the use of advanced medical technologies at home. The study focused on advanced medical technologies that are part of the technical nursing process and 'hands on' processes by nurses, excluding information technology such as domotica. The systematic review of literature was performed by searching the databases MEDLINE, Scopus and Cinahl. We included papers from 2000 to 2015 and selected articles containing empirical material. The review identified 87 relevant articles, 62% was published in the period 2011-2015. Of the included studies, 45% considered devices for respiratory support, 39% devices for dialysis and 29% devices for oxygen therapy. Most research has been conducted on the topic 'user experiences' (36%), mainly regarding patients or informal caregivers. Results show that nurses have a key role in supporting patients and family caregivers in the process of homecare with advanced medical technologies and in providing information for, and as a member of multi-disciplinary teams. However, relatively low numbers of articles were found studying nurses perspective. Research on medical technologies used at home has increased considerably until 2015. Much is already known on topics, such as user experiences; safety, risks, incidents and complications; and design and technological development. We also identified a lack of research exploring the views of nurses with regard to medical technologies for homecare, such as user experiences of nurses with different technologies, training, instruction and education of nurses and human factors by nurses in risk management and patient safety.

  4. [Chapter 2. Transitions in drug-discovery technology and drug-development in Japan (1980-2010)].

    Science.gov (United States)

    Sakakibara, Noriko; Yoshioka, Ryuzo; Matsumoto, Kazuo

    2014-01-01

    In 1970s, the material patent system was introduced in Japan. Since then, many Japanese pharmaceutical companies have endeavored to create original in-house products. From 1980s, many of the innovative products were small molecular drugs and were developed using powerful medicinal-chemical technologies. Among them were antibiotics and effective remedies for the digestive organs and circulatory organs. During this period, Japanese companies were able to launch some blockbuster drugs. At the same time, the pharmaceutical market, which had grown rapidly for two decades, was beginning to level off. From the late 1990s, drug development was slowing down due to the lack of expertise in biotechnology such as genetic engineering. In response to the circumstances, the research and development on biotechnology-based drugs such as antibody drugs have become more dynamic and popular at companies than small molecule drugs. In this paper, the writers reviewed in detail the transitions in drug discovery and development between 1980 and 2010.

  5. Research and Development of Technologies for Partitioning and Transmutation of Long-lived Nuclides in Japan - Status and Evaluation

    International Nuclear Information System (INIS)

    Sanae Aoki

    2003-01-01

    Japanese basic policy regarding disposal of high-level radioactive waste (HLW) is to solidify it into stabilized form, to store it for 30-50 years to be cooled, and to dispose of it deep to the underground (geological disposal). In Japan, reference to P and T technology for long-lived and other nuclides first appeared in the Long-term Programme for Nuclear Research, Development and Utilisation (or 'long-term nuclear programme') back in 1972. That programme noted the need for research and development in order to ensure effective processing of radioactive waste. The long-term nuclear programme issued in 1987 stated that P and T technology was very important from the viewpoint of recycling HLW and enhancing disposal efficiency. It also stated that systematic R and D would be carried out jointly by JAERI, the Power Reactor and Nuclear Fuel Development Corp. (PNC, now JNC) and others. The long-term nuclear programme issued in 1994 stated that each research institute would carry out basic studies on P and T technologies and evaluate each technology at some time in the mid- 1990's to determine how to proceed thereafter. Based on the evaluation schedule stated in this program, the AEC's Advisory Committee on Nuclear Fuel Cycle Back-end Policy investigated and considered matters concerning P and T technology for long-lived and other nuclides. In March 2000, the Committee issued a report entitled 'Research and Development of Technologies for Partitioning and Transmutation of Long-lived Nuclide Status and Evaluation Report'. A brief summary of this report is presented

  6. The importance of quantitative measurement methods for uveitis: laser flare photometry endorsed in Europe while neglected in Japan where the technology measuring quantitatively intraocular inflammation was developed.

    Science.gov (United States)

    Herbort, Carl P; Tugal-Tutkun, Ilknur

    2017-06-01

    Laser flare photometry (LFP) is an objective and quantitative method to measure intraocular inflammation. The LFP technology was developed in Japan and has been commercially available since 1990. The aim of this work was to review the application of LFP in uveitis practice in Europe compared to Japan where the technology was born. We reviewed PubMed articles published on LFP and uveitis. Although LFP has been largely integrated in routine uveitis practice in Europe, it has been comparatively neglected in Japan and still has not received FDA approval in the USA. As LFP is the only method that provides a precise measure of intraocular inflammation, it should be used as a gold standard in uveitis centres worldwide.

  7. 2. JAPAN-IAEA workshop on advanced safeguards technology for the future nuclear fuel cycle. Abstracts

    International Nuclear Information System (INIS)

    2009-01-01

    This international workshop addressed issues and technologies associated with safeguarding the future nuclear fuel cycle. The workshop discussed issues of interest to the safeguards community, facility operators and State Systems of accounting and control of nuclear materials. Topic areas covered were as follows: Current Status and Future Prospects of Developing Safeguards Technologies for Nuclear Fuel Cycle Facilities, Technology and Instrumentation Needs, Advanced Safeguards Technologies, Guidelines on Developing Instrumentation to Lead the Way for Implementing Future Safeguards, and Experiences and Lessons learned. This workshop was of interest to individuals and organizations concerned with future nuclear fuel cycle technical developments and safeguards technologies. This includes representatives from the nuclear industry, R and D organizations, safeguards inspectorates, State systems of accountancy and control, and Member States Support Programmes

  8. Implementing technology to improve medication safety in healthcare facilities: a literature review.

    Science.gov (United States)

    Hidle, Unn

    Medication errors remain one of the most common causes of patient injuries in the United States, with detrimental outcomes including adverse reactions and even death. By developing a better understanding of why and how medication errors occur, preventative measures may be implemented including technological advances. In this literature review, potential methods of reducing medication errors were explored. Furthermore, technology tools available for medication orders and administration are described, including advantages and disadvantages of each system. It was found that technology can be an excellent aid in improving safety of medication administration. However, computer technology cannot replace human intellect and intuition. Nurses should be involved when implementing any new computerized system in order to obtain the most appropriate and user-friendly structure.

  9. Tail gas treatment of SEWGS technology. Literature review on CO2 and H2S separation

    Energy Technology Data Exchange (ETDEWEB)

    Fabbri, E.N.; Van Dijk, H.A.J. [ECN Biomass and Energy Efficiency, Petten (Netherlands)

    2011-12-15

    This literature review is the result of an investigation of the most important way to remove sulphur for the last decades. We will discuss Claus and Claus tail gas process options to solve the problem. Next to solutions which come from membranes, direct oxidation catalysis, from acid gas removal technology, sorbent technology, and liquid oxidation. Each field will be described and explained to understand in which way it could be suitable to separate CO2 and H2S and reach our goals with regard to CO2 transport and storage conditions. Finally, the target of this work will be to propose some interesting and promising solutions in view of future experiments.

  10. Life cycle assessment of soil and groundwater remediation technologies: literature review

    DEFF Research Database (Denmark)

    Lemming, Gitte; Hauschild, Michael Zwicky; Bjerg, Poul Løgstrup

    2010-01-01

    Background, aim, and scope Life cycle assessment (LCA) is becoming an increasingly widespread tool in support systems for environmental decision-making regarding the cleanup of contaminated sites. In this study, the use of LCA to compare the environmental impacts of different remediation...... and scope definition and the applied impact assessment. The studies differ in their basic approach since some are prospective with focus on decision support while others are retrospective aiming at a more detailed assessment of a completed remediation project. Literature review The literature review showed...... scenarios in terms of their associated environmental burden. Main features An overview of the assessed remediation technologies and contaminant types covered in the literature is presented. The LCA methodologies of the 12 reviewed studies were compared and discussed with special focus on their goal...

  11. Teacher educators' competences in fostering student teachers' proficiency in teaching and learning with technology : An overview of relevant research literature

    NARCIS (Netherlands)

    Dana Uerz; Monique Volman; Marijke Kral

    2018-01-01

    Teacher educators play an important role in preparing student teachers to integrate technology into their classrooms. This article presents an overview of research literature on teacher educators' competences in preparing their students to teach with technology. A literature search yielded 26

  12. JPRS Report, Science & Technology, Japan, Government and Private Sector Joint R&D Projects

    Science.gov (United States)

    1988-08-16

    Development of technology for evaluating efficacy of antiviral drugs; Akira Otani at the National Institute of Health. Research Organizations: Ajinomoto ...cytokine and its network. 10 Research Organizations: Ajinomoto Co., Inc.; Ito Ham Provisions Co., Ltd.; Takeda Chemical Industries, Ltd.; Tsumura

  13. Neuroscience and nanotechnologies in Japan--beyond the hope and hype of converging technologies.

    Science.gov (United States)

    Mushiaki, Shigeru

    2011-01-01

    Nanotechnologies are often said to be "converging" with other technologies like biotechnology, information technology, and cognitive science. And so-called "NBIC convergence" is thought to enable "enhancement" of human performance. First, I classify various kinds of enhancement. Second, I focus on the "cybernetic enhancement," to which nanotechnologies are supposed to contribute, and analyze the connection and integration of humans with machines, which could lead to the cyborgization of human beings. Third, I examine the portrayal of robot/cyborg technology in Japanese popular media, point out the tendency to empathy or ensoulment concerning robots/cyborgs, and raise the question of "ethical issues of ethical enhancement." Fourth, I compare nanotechnologies with neurotechnology and criticize the hype of "converging technologies."

  14. Support for Development of Electronics and Materials Technologies by the Governments of the United States, Japan, West Germany, France, and the United Kingdom.

    Science.gov (United States)

    General Accounting Office, Washington, DC.

    The governments of the United States, Japan, West Germany, France, and the United Kingdom each have large research and development efforts involving government agencies, universities and industry. This document provides a comparative overview of policies and programs which contribute to the development of technologies in the general area of…

  15. Investigating the effectiveness of technologies applied to assist seniors: A systematic literature review.

    Science.gov (United States)

    Khosravi, Pouria; Ghapanchi, Amir Hossein

    2016-01-01

    Recently, a number of Information and Communication Technologies have emerged with the aim to provide innovative and efficient ways to help seniors in their daily life and to reduce the cost of healthcare. Studies have been conducted to introduce an assistive technology to support seniors and to investigate the acceptance of these assistive technologies; however, research illustrating the effectiveness of assistive technologies is scant. This study undertakes a systematic literature review of ScienceDirect, PubMed, ProQuest and IEEE Explore databases to investigate current empirical studies on the assistive technologies applied in aged care. Our systematic review of an initial set of 2035 studies published from 2000 to 2014 examines the role of assistive technologies in seniors' daily lives, from enhancements in their mobility to improvements in the social connectedness and decreases in readmission to hospitals. This study found eight key issues in aged care that have been targeted by researchers from different disciplines (e.g., ICT, health and social science), namely, dependent living, fall risk, chronic disease, dementia, social isolation, depression, poor well-being, and poor medication management. This paper also identified the assistive technologies that have been proposed to overcome those problems, and we categorised these assistive technologies into six clusters, namely, general ICT, robotics, telemedicine, sensor technology, medication management applications, and video games. In addition, we analyzed the effectiveness of the identified technologies and noted that some technologies can change and enhance seniors' daily lives and relieve their problems. Our analysis showed a significant growth in the number of publications in this area in the past few years. It also showed that most of the studies in this area have been conducted in North America. Assistive technologies are a reality and can be applied to improve quality of life, especially among older age

  16. Current status of electron beam processing applications and the latest accelerator technologies in Japan

    International Nuclear Information System (INIS)

    Hoshi, Yasuhisa

    1998-01-01

    Electron Beam (EB) processing has been increasing in popularity as a cross-linking process since the beginning of its industrial use. Examples are heat resistance improvement of electric wires, high quality foamed polyethylene (PE) and polypropylene (PP), automotive tire manufacturing and heat shrinkable products. EB is also used in the tire manufacturing process as a pre-vulcanisation of rubber sheet before forming process. Cross-linking of electric wire insulators is the most popular industrial application of electron beam accelerators in Japan. EB cross-linked wires are widely used in electrical appliances and automotive wire harnesses. Curing of inks or coating is a promising application of low energy EB. EB cure is often compared with Ultra-Violet (UV) curing. Both has a common advantage compared with a conventional heat curing process such as no solvent requirement. A typical advantage is that no initiators are required to start curing process. EB can also be used to remove SO 2 and NO x from coal flue gas. This paper reports some of these applications and discusses the latest equipment design. (author)

  17. Operational water consumption and withdrawal factors for electricity generating technologies: a review of existing literature

    International Nuclear Information System (INIS)

    Macknick, J; Newmark, R; Heath, G; Hallett, K C

    2012-01-01

    This report provides estimates of operational water withdrawal and water consumption factors for electricity generating technologies in the United States. Estimates of water factors were collected from published primary literature and were not modified except for unit conversions. The water factors presented may be useful in modeling and policy analyses where reliable power plant level data are not available. Major findings of the report include: water withdrawal and consumption factors vary greatly across and within fuel technologies, and water factors show greater agreement when organized according to cooling technologies as opposed to fuel technologies; a transition to a less carbon-intensive electricity sector could result in either an increase or a decrease in water use, depending on the choice of technologies and cooling systems employed; concentrating solar power technologies and coal facilities with carbon capture and sequestration capabilities have the highest water consumption values when using a recirculating cooling system; and non-thermal renewables, such as photovoltaics and wind, have the lowest water consumption factors. Improved power plant data and further studies into the water requirements of energy technologies in different climatic regions would facilitate greater resolution in analyses of water impacts of future energy and economic scenarios. This report provides the foundation for conducting water use impact assessments of the power sector while also identifying gaps in data that could guide future research. (letter)

  18. Current State of Development of Electricity-Generating Technologies: A Literature Review

    Directory of Open Access Journals (Sweden)

    Manfred Lenzen

    2010-03-01

    Full Text Available Electricity is perhaps the most versatile energy carrier in modern economies, and it is therefore fundamentally linked to human and economic development. Electricity growth has outpaced that of any other fuel, leading to ever-increasing shares in the overall mix. This trend is expected to continue throughout the following decades, as large—especially rural—segments of the world population in developing countries start to climb the “energy ladder” and become connected to power grids. Electricity therefore deserves particular attention with regard to its contribution to global greenhouse gas emissions, which is reflected in the ongoing development of low-carbon technologies for power generation. The focus of this updated review of electricity-generating technologies is twofold: (a to provide more technical information than is usually found in global assessments on critical technical aspects, such as variability of wind power, and (b to capture the most recent findings from the international literature. This report covers eight technologies. Seven of these are generating technologies: hydro-, nuclear, wind, photovoltaic, concentrating solar, geothermal and biomass power. The remaining technology is carbon capture and storage. This selection is fairly representative for technologies that are important in terms of their potential capacity to contribute to a low-carbon world economy.

  19. Mobile technology-based interventions for adult users of alcohol: A systematic review of the literature.

    Science.gov (United States)

    Fowler, Lauren A; Holt, Sidney L; Joshi, Deepti

    2016-11-01

    Worldwide, 16% of people aged 15 and older engage in harmful use of alcohol. Harmful alcohol use leads to a host of preventable negative social and health consequences. Mobile technology-based interventions provide a particularly promising avenue for the widespread and cost-effective delivery of treatment that is accessible, affordable, individualized, and destigmatized to both alcohol-dependent and nondependent individuals. The present review sought to summarize the current literature on mobile technology-based interventions among adult users of alcohol and determine the efficacy of such interventions. Five databases were searched in December 2015 (Jan. 2004-Dec. 2015). Inclusion criteria were: participants aged 18 or older, interventions delivered through mobile-technology, and outcome measurement of alcohol reduction/cessation. Eight studies met inclusion criteria. The majority of the studies reviewed found positive effects of the intervention, even though the interventions themselves varied in design, length, dosage, and target population, and were pilot or preliminary in nature. Findings from this review highlight the promising, yet preliminary state of research in this area. Studies with adequate power and valid design are necessary to evaluate the potential of mobile technology-based interventions on long-term alcohol behavior outcomes. Furthermore, future research should elucidate what the most effective length of time is for a mobile technology-based intervention, how often individuals should receive messages for maximum benefit, and determine the comparative effectiveness of mobile technology interventions with other efficacious interventions. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Japan 2003

    DEFF Research Database (Denmark)

    Ørstrup, Finn Rude; Hvass, Sven

    2003-01-01

    Kompendium udarbejdet til en studierejse til Japan  2003 Kunstakademiets Arkitektskole, Studieafdeling 10......Kompendium udarbejdet til en studierejse til Japan  2003 Kunstakademiets Arkitektskole, Studieafdeling 10...

  1. JETC (Japanese Technology Evaluation Center) Panel Report on High Temperature Superconductivity in Japan

    Science.gov (United States)

    Shelton, Duane; Gamota, George

    1989-01-01

    The Japanese regard success in R and D in high temperature superconductivity as an important national objective. The results of a detailed evaluation of the current state of Japanese high temperature superconductivity development are provided. The analysis was performed by a panel of technical experts drawn from U.S. industry and academia, and is based on reviews of the relevant literature and visits to Japanese government, academic and industrial laboratories. Detailed appraisals are presented on the following: Basic research; superconducting materials; large scale applications; processing of superconducting materials; superconducting electronics and thin films. In all cases, comparisons are made with the corresponding state-of-the-art in the United States.

  2. Trade and Technology: Maintaining the U.S.-Japan Security Relationship in the Post-Cold War Era

    Science.gov (United States)

    1992-12-01

    successful foreign firms in Japan which have demonstrated that these barriers can be overcome. For example, Coca - Cola maintains over 80 percent of...was scarce. Japan was the first place MIT’s media lab sought out for sponsorship , which by 1984 was providing approximately $500,000 a year (25...Japan’s cola market; Nestle has garnered 70 percent of the instant coffee market; Schick controls 70 percent of the razor market; and from 1986 to 1989

  3. JPRS Report, Science & Technology, Japan. Goto Quantum Magneto-Flux Logic Project.

    Science.gov (United States)

    1992-04-23

    established infrastruc- T. Kobayashi Professor, Physics Department, ture technology, such as the minimal signal measure-Faculty of Science, Tokyo Uni...5th Josephson Electronics, p 103 ence Proceedings, p 1215 (1989) (1988) M. Sato, N. Fukazawa, P. Spee and E. Goto J. Yuyama, M. Kasuya, S. Kobayashi , R...a speed similar to the real number inner product Nobuaki Yoshida computation. Because the single precision inner product computation can be composed

  4. JPRS Report Science & Technology Japan STA 1988 White Paper Part 2.

    Science.gov (United States)

    1989-12-13

    capability to survey a broad area of the sea and to reach seamounts of gorges unaccessible to a manned submersible. The construction of a 6,000- meter...development of a technique to measure long-term changes in the environment and the national ecosystem, including the earth-wide environmental and ecological ...Japanese 31 Jan 89 pp 1-499 [Selected portions of the 1988 STA Science and Technology White Paper] CONTENTS Chapter III. Government Policy 1

  5. Health Information Technology in Healthcare Quality and Patient Safety: Literature Review.

    Science.gov (United States)

    Feldman, Sue S; Buchalter, Scott; Hayes, Leslie W

    2018-06-04

    The area of healthcare quality and patient safety is starting to use health information technology to prevent reportable events, identify them before they become issues, and act on events that are thought to be unavoidable. As healthcare organizations begin to explore the use of health information technology in this realm, it is often unclear where fiscal and human efforts should be focused. The purpose of this study was to provide a foundation for understanding where to focus health information technology fiscal and human resources as well as expectations for the use of health information technology in healthcare quality and patient safety. A literature review was conducted to identify peer-reviewed publications reporting on the actual use of health information technology in healthcare quality and patient safety. Inductive thematic analysis with open coding was used to categorize a total of 41 studies. Three pre-set categories were used: prevention, identification, and action. Three additional categories were formed through coding: challenges, outcomes, and location. This study identifies five main categories across seven study settings. A majority of the studies used health IT for identification and prevention of healthcare quality and patient safety issues. In this realm, alerts, clinical decision support, and customized health IT solutions were most often implemented. Implementation, interface design, and culture were most often noted as challenges. This study provides valuable information as organizations determine where they stand to get the most "bang for their buck" relative to health IT for quality and patient safety. Knowing what implementations are being effectivity used by other organizations helps with fiscal and human resource planning as well as managing expectations relative to cost, scope, and outcomes. The findings from this scan of the literature suggest that having organizational champion leaders that can shepherd implementation, impact culture

  6. The attitudes of health care staff to information technology: a comprehensive review of the research literature.

    Science.gov (United States)

    Ward, Rod; Stevens, Christine; Brentnall, Philip; Briddon, Jason

    2008-06-01

    What does the publicly available literature tell us about the attitudes of health care staff to the development of information technology in practice, including the factors which influence them and the factors which may be used to change these attitudes? Twelve databases were searched for literature published between 2000 and 2005 that identified research related to information technology (IT), health professionals and attitude. English language studies were included which described primary research relating to the attitudes of one or more health care staff groups towards IT. Letters, personal viewpoints, reflections and opinion pieces were not included. Complex factors contribute to the formation of attitudes towards IT. Many of the issues identified were around the flexibility of the systems and whether they were 'fit for purpose', along with the confidence and experience of the IT users. The literature suggests that attitudes of practitioners are a significant factor in the acceptance and efficiency of use of IT in practice. The literature also suggested that education and training was a factor for encouraging the use of IT systems. A range of key issues, such as the need for flexibility and usability, appropriate education and training and the need for the software to be 'fit for purpose', showed that organizations need to plan carefully when proposing the introduction of IT-based systems into work practices. The studies reviewed did suggest that attitudes of health care professionals can be a significant factor in the acceptance and efficiency of use of IT in practice. Further qualitative and quantitative research is needed into the approaches that have most effect on the attitudes of health care staff towards IT.

  7. Social media and digital technology use among Indigenous young people in Australia: a literature review.

    Science.gov (United States)

    Rice, Emma S; Haynes, Emma; Royce, Paul; Thompson, Sandra C

    2016-05-25

    The use of social media and digital technologies has grown rapidly in Australia and around the world, including among Indigenous young people who face social disadvantage. Given the potential to use social media for communication, providing information and as part of creating and responding to social change, this paper explores published literature to understand how Indigenous Australian youth use digital technologies and social media, and its positive and negative impacts. Online literature searches were conducted in three databases: PubMed, Google Scholar and Informit in August 2014; with further searches of additional relevant databases (Engineering Village; Communication & mass media complete; Computers & applied sciences complete; Web of Science) undertaken in May 2015. In addition, relevant literature was gathered using citation snowballing so that additional peer-reviewed and grey literature was included. Articles were deemed relevant if they discussed social media and/or digital technologies and Indigenous Australians. After reading and reviewing all relevant articles, a thematic analysis was used to identify overall themes and identify specific examples. A total of 22 papers were included in the review. Several major themes were identified about how and why Indigenous young people use social media: identity, power and control, cultural compatibility and community and family connections. Examples of marketing for health and health promotion approaches that utilize social media and digital technologies were identified. Negative uses of social media such as cyber bullying, cyber racism and the exchange of sexually explicit content between minors are common with limited approaches to dealing with this at the community level. Strong cultural identity and community and family connections, which can be enhanced through social media, are linked to improved educational and health outcomes. The confidence that Indigenous young people demonstrate when approaching the

  8. Mobile Health Technology in Late-Life Mental Illness: A Focused Literature Review.

    Science.gov (United States)

    Moussa, Yara; Mahdanian, Artin A; Yu, Ching; Segal, Marilyn; Looper, Karl J; Vahia, Ipsit V; Rej, Soham

    2017-08-01

    In an era of rising geriatric mental health care needs worldwide, technological advances can help address care needs in a cost-effective fashion. Our objective in this review was to assess whether mobile health technology, such as tablets and smartphones, are feasible to use in patients with late-life mental and cognitive disorders, as well as whether they were generally reliable modes of mental health/cognitive assessment. We performed a focused literature review of MEDLINE, PsychInfo, and Embase databases, including papers specifically assessing the implementation of mobile health technologies: electronic tablets (e.g., iPad), smartphones, and other mobile computerized equipment in older adults (age ≥65 years) diagnosed with or at risk of a mental and/or cognitive disorder. A total of 2,079 records were assessed, of which 7 papers were of direct relevance. Studies investigated a broad variety of mobile health technologies. Almost all examined samples with dementia/cognitive dysfunction or at risk for those disorders. All studies exclusively examined the use of mobile health technologies for the assessment of cognitive and or mental illness symptoms or disorders. None of the studies reported participants having any difficulties using the mobile health technology assessments and overall reliability was similar to paper-and-pencil modes of assessment. Overall, mobile health technologies were found to be feasible by patients and had promising reliability for the assessment of cognitive and mental illness domains in older adults. Future clinical trials will be necessary to assess whether portable communication interventions (e.g., symptom tracking) can improve geriatric mental health outcomes. Copyright © 2017 American Association for Geriatric Psychiatry. Published by Elsevier Inc. All rights reserved.

  9. Development status on hydrogen production technology using high-temperature gas-cooled reactor at JAEA, Japan

    International Nuclear Information System (INIS)

    Shiozawa, Shusaku; Ogawa, Masuro; Hino, Ryutaro

    2006-01-01

    The high-temperature gas-cooled reactor (HTGR), which is graphite-moderated and helium-cooled, is attractive due to its unique capability of producing high temperature helium gas and its fully inherent reactor safety. In particular, hydrogen production using the nuclear heat from HTGR (up to 900 deg. C) offers one of the most promising technological solutions to curb the rising level of CO 2 emission and resulting risk of climate change. The interests in HTGR as an advanced nuclear power source for the next generation reactor, therefore, continue to rise. This is represented by the Japanese HTTR (High-Temperature Engineering Test Reactor) Project and the Chinese HTR-10 Project, followed by the international Generation IV development program, US nuclear hydrogen initiative program, EU innovative HTR technology development program, etc. To enhance nuclear energy application to heat process industries, the Japan Atomic Energy Agency (JAEA) has continued extensive efforts for development of hydrogen production system using the nuclear heat from HTGR in the framework of the HTTR Project. The HTTR Project has the objectives of establishing both HTGR technology and heat utilization technology. Using the HTTR constructed at the Oarai Research and Development Center of JAEA, reactor performance and safety demonstration tests have been conducted as planned. The reactor outlet temperature of 950 deg. C was successfully achieved in April 2004. For hydrogen production as heat utilization technology, R and D on thermo-chemical water splitting by the 'Iodine-Sulfur process' (IS process) has been conducted step by step. Proof of the basic IS process was made in 1997 on a lab-scale of hydrogen production of 1 L/h. In 2004, one-week continuous operation of the IS process was successfully demonstrated using a bench-scale apparatus with hydrogen production rate of 31 L/h. Further test using a pilot scale facility with greater hydrogen production rate of 10 - 30 m 3 /h is planned as

  10. The adoption and implementation of RFID technologies in healthcare: a literature review.

    Science.gov (United States)

    Yao, Wen; Chu, Chao-Hsien; Li, Zang

    2012-12-01

    Radio Frequency Identification (RFID) technology not only offers tracking capability to locate equipment, supplies and people in real time, but also provides efficient and accurate access to medical data for health professionals. However, the reality of RFID adoption in healthcare is far behind earlier expectation. This study reviews literature on the use of RFID in healthcare/hospitals following a formal innovation-decision framework. We aim to identify the common applications, potential benefits, barriers, and critical success factors. Our study facilitates quick assessment and provides guidance for researchers and practitioners in adopting RFID in medical arenas. Many earlier adopters in healthcare found RFID to be functional and useful in such areas as asset tracking and patient identification. Major barriers to adoption include technological limitations, interference concerns, prohibitive costs, lack of global standards and privacy concerns. Better designed RFID systems with low cost and privacy issues addressed are needed to increase acceptance of RFID in healthcare.

  11. Mobile technology and its use in clinical nursing education: a literature review.

    Science.gov (United States)

    O'Connor, Siobhan; Andrews, Tom

    2015-03-01

    Nursing students face a variety of challenges to learning in clinical practice, from the theory-practice gap, to a lack of clinical supervision and the ad hoc nature of learning in clinical environments. Mobile technology is proposed as one way to address these challenges. This article comprehensively summarizes and critically reviews the available literature on mobile technology used in undergraduate clinical nursing education. It identifies the lack of clear definitions and theory in the current body of evidence; the variety of mobile devices and applications used; the benefits of mobile platforms in nursing education; and the complexity of sociotechnical factors, such as the cost, usability, portability, and quality of mobile tools, that affect their use in undergraduate clinical nursing education. Implications for nursing education and practice are outlined, and recommendations for future research are discussed. Copyright 2015, SLACK Incorporated.

  12. Impact of radio-frequency identification (RFID) technologies on the hospital supply chain: a literature review.

    Science.gov (United States)

    Coustasse, Alberto; Tomblin, Shane; Slack, Chelsea

    2013-01-01

    Supply costs account for more than one-third of the average operating budget and constitute the second largest expenditure in hospitals. As hospitals have sought to reduce these costs, radio-frequency identification (RFID) technology has emerged as a solution. This study reviews existing literature to gauge the recent and potential impact and direction of the implementation of RFID in the hospital supply chain to determine current benefits and barriers of adoption. Findings show that the application of RFID to medical equipment and supplies tracking has resulted in efficiency increases in hospitals with lower costs and increased service quality. RFID technology can reduce costs, improve patient safety, and improve supply chain management effectiveness by increasing the ability to track and locate equipment, as well as monitoring theft prevention, distribution management, and patient billing. Despite ongoing RFID implementation in the hospital supply chain, barriers to widespread and rapid adoption include significant total expenditures, unclear return on investment, and competition with other strategic imperatives.

  13. Software Quality Evaluation Models Applicable in Health Information and Communications Technologies. A Review of the Literature.

    Science.gov (United States)

    Villamor Ordozgoiti, Alberto; Delgado Hito, Pilar; Guix Comellas, Eva María; Fernandez Sanchez, Carlos Manuel; Garcia Hernandez, Milagros; Lluch Canut, Teresa

    2016-01-01

    Information and Communications Technologies in healthcare has increased the need to consider quality criteria through standardised processes. The aim of this study was to analyse the software quality evaluation models applicable to healthcare from the perspective of ICT-purchasers. Through a systematic literature review with the keywords software, product, quality, evaluation and health, we selected and analysed 20 original research papers published from 2005-2016 in health science and technology databases. The results showed four main topics: non-ISO models, software quality evaluation models based on ISO/IEC standards, studies analysing software quality evaluation models, and studies analysing ISO standards for software quality evaluation. The models provide cost-efficiency criteria for specific software, and improve use outcomes. The ISO/IEC25000 standard is shown as the most suitable for evaluating the quality of ICTs for healthcare use from the perspective of institutional acquisition.

  14. Grid Load Shifting and Performance Assessments of Residential Efficient Energy Technologies, a Case Study in Japan

    Directory of Open Access Journals (Sweden)

    Yanxue Li

    2018-06-01

    Full Text Available The increasing penetration of renewable energy decreases grid flexibility; thus, decentralized energy management or demand response are emerging as the main approaches to resolve this limitation and to provide flexibility of resources. This research investigates the performance of high energy efficiency appliances and grid-integrated distributed generators based on real monitored data from a social demonstration project. The analysis not only explores the potential cost savings and environmental benefits of high energy efficiency systems in the private sector, but also evaluates public grid load leveling potential from a bottom-up approach. This research provides a better understanding of the behavior of high decentralized efficient energy and includes detailed scenarios of monitored power generation and consumption in a social demonstration project. The scheduled heat pump effectively lifts valley load via transforming electricity to thermal energy, its daily electricity consumption varies from 4 kWh to 10 kWh and is concentrated in the early morning over the period of a year. Aggregated vehicle to home (V2H brings flexible resources to the grid, by discharging energy to cover the residential night peak load, with fuel cost savings attributed to 90% of profit. The potential for grid load leveling via integrating the power utility and consumer is examined using a bottom-up approach. Five hundred thousand contributions from scheduled electrical vehicles (EVs and fuel cells provide 5.0% of reliable peak power capacity at 20:00 in winter. The outcome illustrates the energy cost saving and carbon emission reduction scenarios of each of the proposed technologies. Relevant subsidies for heat pump water heater systems and cogeneration are essential customers due to the high initial capital investment. Optimal mixes in structure and coordinated control of high efficiency technologies enable customers to participate in grid load leveling in terms of

  15. Microelectronics in Japan

    Science.gov (United States)

    Boulton, William R.

    1995-02-01

    The purpose of this JTEC study is to evaluate Japan's electronic manufacturing and packaging capabilities within the context of global economic competition. To carry out this study, the JTEC panel evaluated the framework of the Japanese consumer electronics industry and various technological and organizational factors that are likely to determine who will win and lose in the marketplace. This study begins with a brief overview of the electronics industry, especially as it operates in Japan today. Succeeding chapters examine the electronics infrastructure in Japan and take an in-depth look at the central issues of product development in order to identify those parameters that will determine future directions for electronic packaging technologies.

  16. Progress of ITER full tungsten divertor technology qualification in Japan: Manufacturing full-scale plasma-facing unit prototypes

    International Nuclear Information System (INIS)

    Ezato, Koichiro; Suzuki, Satoshi; Seki, Yohji; Yamada, Hirokazu; Hirayama, Tomoyuki; Yokoyama, Kenji; Escourbiac, Frederic; Hirai, Takeshi

    2016-01-01

    Highlights: • JADA has demonstrated the feasibility of manufacturing the full-W plasma-facing units (W-PFU). • The surface profiles of the W monoblocks of the W-PFU prototypes on the test frame to mimic the support structure of the ITER OVT were examined by using an optical three-dimensional measurement system. The results show the most W monoblock surface in the target part locates within + 0.25 mm from the CAD data. • The strict profile control with the profile tolerance of ±0.3 mm is imposed on the OVT to prevent the leading edges of the W monoblocks from over-heating. • The present full-scale prototyping demonstrates to satisfy this requirement on the surface profile. • It can be concluded that the technical maturities of JADA and its suppliers are as high as to start series manufacturing the ITER divertor components. - Abstract: Japan Atomic Energy Agency (JAEA) is in progress for technology demonstration toward Full-tungsten (W) ITER divertor outer vertical target (OVT), especially, W monoblock technology that needs to withstand the repetitive heat load as high as 20 MW/m 2 for 10 s. Under the framework of the W divertor qualification program developed ITER organization, JAEA as Japanese Domestic Agency (JADA) manufactured seven full-scale plasma-facing unit (PFU) prototypes with the Japanese industries. Four prototypes that have 146 W monoblock joint with casted copper (Cu) interlayer passed successfully the ultrasonic testing. In the other three prototypes that have the different W/Cu interlayer joint, joint defects were found. The dimension measurements reveal the requirements of the gap between W monoblocks and the surface profile of PFU are feasible.

  17. Progress of ITER full tungsten divertor technology qualification in Japan: Manufacturing full-scale plasma-facing unit prototypes

    Energy Technology Data Exchange (ETDEWEB)

    Ezato, Koichiro, E-mail: ezato.koichiro@jaea.go.jp [Department of ITER Project, Naka Fusion Institute, Sector of Fusion Research and Development, Japan Atomic Energy Agency (Japan); Suzuki, Satoshi; Seki, Yohji; Yamada, Hirokazu; Hirayama, Tomoyuki; Yokoyama, Kenji [Department of ITER Project, Naka Fusion Institute, Sector of Fusion Research and Development, Japan Atomic Energy Agency (Japan); Escourbiac, Frederic; Hirai, Takeshi [ITER Organization, route de vinon sur Verdon, 13067 St Paul lez Durance (France)

    2016-11-01

    Highlights: • JADA has demonstrated the feasibility of manufacturing the full-W plasma-facing units (W-PFU). • The surface profiles of the W monoblocks of the W-PFU prototypes on the test frame to mimic the support structure of the ITER OVT were examined by using an optical three-dimensional measurement system. The results show the most W monoblock surface in the target part locates within + 0.25 mm from the CAD data. • The strict profile control with the profile tolerance of ±0.3 mm is imposed on the OVT to prevent the leading edges of the W monoblocks from over-heating. • The present full-scale prototyping demonstrates to satisfy this requirement on the surface profile. • It can be concluded that the technical maturities of JADA and its suppliers are as high as to start series manufacturing the ITER divertor components. - Abstract: Japan Atomic Energy Agency (JAEA) is in progress for technology demonstration toward Full-tungsten (W) ITER divertor outer vertical target (OVT), especially, W monoblock technology that needs to withstand the repetitive heat load as high as 20 MW/m{sup 2} for 10 s. Under the framework of the W divertor qualification program developed ITER organization, JAEA as Japanese Domestic Agency (JADA) manufactured seven full-scale plasma-facing unit (PFU) prototypes with the Japanese industries. Four prototypes that have 146 W monoblock joint with casted copper (Cu) interlayer passed successfully the ultrasonic testing. In the other three prototypes that have the different W/Cu interlayer joint, joint defects were found. The dimension measurements reveal the requirements of the gap between W monoblocks and the surface profile of PFU are feasible.

  18. Rehabilitation Engineering & Assistive Technology Society (RESNA) position on the application of wheelchair standing devices: 2013 current state of the literature.

    Science.gov (United States)

    Dicianno, Brad E; Morgan, Amy; Lieberman, Jenny; Rosen, Lauren

    2016-01-01

    This article, approved by the Rehabilitation Engineering & Assistive Technology Society of North America Board of Directors on December 23, 2013, shares typical clinical applications and provides evidence from the literature supporting the use of wheelchair standers.

  19. Community health workers and mobile technology: a systematic review of the literature.

    Science.gov (United States)

    Braun, Rebecca; Catalani, Caricia; Wimbush, Julian; Israelski, Dennis

    2013-01-01

    In low-resource settings, community health workers are frontline providers who shoulder the health service delivery burden. Increasingly, mobile technologies are developed, tested, and deployed with community health workers to facilitate tasks and improve outcomes. We reviewed the evidence for the use of mobile technology by community health workers to identify opportunities and challenges for strengthening health systems in resource-constrained settings. We conducted a systematic review of peer-reviewed literature from health, medical, social science, and engineering databases, using PRISMA guidelines. We identified a total of 25 unique full-text research articles on community health workers and their use of mobile technology for the delivery of health services. Community health workers have used mobile tools to advance a broad range of health aims throughout the globe, particularly maternal and child health, HIV/AIDS, and sexual and reproductive health. Most commonly, community health workers use mobile technology to collect field-based health data, receive alerts and reminders, facilitate health education sessions, and conduct person-to-person communication. Programmatic efforts to strengthen health service delivery focus on improving adherence to standards and guidelines, community education and training, and programmatic leadership and management practices. Those studies that evaluated program outcomes provided some evidence that mobile tools help community health workers to improve the quality of care provided, efficiency of services, and capacity for program monitoring. Evidence suggests mobile technology presents promising opportunities to improve the range and quality of services provided by community health workers. Small-scale efforts, pilot projects, and preliminary descriptive studies are increasing, and there is a trend toward using feasible and acceptable interventions that lead to positive program outcomes through operational improvements and

  20. Community health workers and mobile technology: a systematic review of the literature.

    Directory of Open Access Journals (Sweden)

    Rebecca Braun

    Full Text Available In low-resource settings, community health workers are frontline providers who shoulder the health service delivery burden. Increasingly, mobile technologies are developed, tested, and deployed with community health workers to facilitate tasks and improve outcomes. We reviewed the evidence for the use of mobile technology by community health workers to identify opportunities and challenges for strengthening health systems in resource-constrained settings.We conducted a systematic review of peer-reviewed literature from health, medical, social science, and engineering databases, using PRISMA guidelines. We identified a total of 25 unique full-text research articles on community health workers and their use of mobile technology for the delivery of health services.Community health workers have used mobile tools to advance a broad range of health aims throughout the globe, particularly maternal and child health, HIV/AIDS, and sexual and reproductive health. Most commonly, community health workers use mobile technology to collect field-based health data, receive alerts and reminders, facilitate health education sessions, and conduct person-to-person communication. Programmatic efforts to strengthen health service delivery focus on improving adherence to standards and guidelines, community education and training, and programmatic leadership and management practices. Those studies that evaluated program outcomes provided some evidence that mobile tools help community health workers to improve the quality of care provided, efficiency of services, and capacity for program monitoring.Evidence suggests mobile technology presents promising opportunities to improve the range and quality of services provided by community health workers. Small-scale efforts, pilot projects, and preliminary descriptive studies are increasing, and there is a trend toward using feasible and acceptable interventions that lead to positive program outcomes through operational

  1. Basic survey for promoting energy efficiency in developing countries. Database development project directory of energy conservation technology in Japan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    In order to promote energy conservation in developing countries, the gist of Japanese energy saving technologies was edited into a database. The Asian territory is expected of remarkable economic development and increased energy consumption including that for fossil fuels. Therefore, this project of structuring a database has urgent importance for the Asian countries. New and wide-area discussions were given to revise the 1995 edition. The committee was composed of members from high energy consuming areas such as iron and steel, paper and pulp, chemical, oil refining, cement, electric power, machinery, electric devices, and industrial machinery industries. Technical literatures and reports were referred to, and opinions were heard from specialists and committee members representing the respective areas. In order to reflect the current status and particular conditions in specific industrial areas, additions were given under the assistance and guidance from the specialists. The energy saving technologies recorded in the database may be called small to medium scale technologies, with the target placed on saving energy by 10% or more. Small-scale energy saving technologies were omitted. Flow charts for manufacturing processes were also added. (NEDO)

  2. Interactive, technology-enhanced self-regulated learning tools in healthcare education: a literature review.

    Science.gov (United States)

    Petty, Julia

    2013-01-01

    Learning technology is increasingly being implemented for programmes of blended learning within nurse education. With a growing emphasis on self-directed study particularly in post-basic education, there is a need for learners to be guided in their learning away from practice and limited classroom time. Technology-enabled (TE) tools which engage learners actively can play a part in this. The effectiveness and value of interactive TE learning strategies within healthcare is the focus of this paper. To identify literature that explores the effectiveness of interactive, TE tools on knowledge acquisition and learner satisfaction within healthcare with a view to evaluating their use for post-basic nurse education. A Literature Review was performed focusing on papers exploring the comparative value and perceived benefit of TE tools compared to traditional modes of learning within healthcare. The Databases identified as most suitable due to their relevance to healthcare were accessed through EBSCOhost. Primary, Boolean and advanced searches on key terms were undertaken. Inclusion and exclusion criteria were applied which resulted in a final selection of 11 studies for critique. Analysis of the literature found that knowledge acquisition in most cases was enhanced and measured learner satisfaction was generally positive for interactive, self-regulated TE tools. However, TE education may not suit all learners and this is critiqued in the light of the identified limitations. Interactive self regulation and/or testing can be a valuable learning strategy that can be incorporated into self-directed programmes of study for post-registration learners. Whilst acknowledging the learning styles not suited to such tools, the concurrent use of self-directed TE tools with those learning strategies necessitating a more social presence can work together to support enhancement of knowledge required to deliver rationale for nursing practice. Copyright © 2012 Elsevier Ltd. All rights

  3. Toxic shock syndrome due to community-acquired methicillin-resistant Staphylococcus aureus infection: Two case reports and a literature review in Japan

    OpenAIRE

    Sada, Ryuichi; Fukuda, Saori; Ishimaru, Hiroyasu

    2017-01-01

    Community-acquired methicillin-resistant Staphylococcus aureus has been spreading worldwide, including in Japan. However, few cases of toxic shock syndrome caused by Community-acquired methicillin-resistant Staphylococcus aureus have been reported in Japan. We report 2 cases, in middle-aged women, of toxic shock syndrome due to Community-acquired methicillin-resistant Staphylococcus aureus via a vaginal portal of entry. The first patient had used a tampon and the second patient had vaginitis ...

  4. Outline in 1997 Japan compound material academic meeting technological prize winning technology. Kenchiku, doboku kozobutsu no hoshu[center dot]hokyo yo forukatousito no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Iba, Yoshitomo.; Uemura, Masahiko.; Murakami, Shinkichi.; Saito, Makoto.; Kobayashi, Akira. (Nittetsu Composite Corp., Tokyo (Japan))

    1999-03-15

    That function declines in the sutra time target, and it is finally destroyed, or a construction structure thing bears putting off that life by managing efficient maintenance it is possible. The factor of the function decline of the structure thing, the degree of the decline, and so on are grasped quantitatively, and efficient repair reinforcement time and a method of construction are chosen, and you must carry it out for that. It is paying attention to the development of the method of construction to reinforce the maintenance repair of the construction structure thing by using the tip compound factor from such a viewpoint. In the beginning, a material cost was very expensive, and the recognition not to use it was very general in such a construction field. In such recognition, in Tonen Corp. incorporated company, it has paid attention to the use possibility in the construction field of the tip compound factor since early, research and development have been done continuously from 1980, that It succeeds in, and it is the method of construction that a repair reinforces a concrete structure thing by the tip material that the method of construction which got the technological prize of the Japan compound material academic meeting in 1997 moved carbon fiber to the center. (NEDO)

  5. Outline in 1997 Japan compound material academic meeting technological prize winning technology; Kenchiku, doboku kozobutsu no hoshu{center_dot}hokyo yo forukatousito no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Iba, Yoshitomo.; Uemura, Masahiko.; Murakami, Shinkichi.; Saito, Makoto.; Kobayashi, Akira. [Nittetsu Composite Corp., Tokyo (Japan)

    1999-03-15

    That function declines in the sutra time target, and it is finally destroyed, or a construction structure thing bears putting off that life by managing efficient maintenance it is possible. The factor of the function decline of the structure thing, the degree of the decline, and so on are grasped quantitatively, and efficient repair reinforcement time and a method of construction are chosen, and you must carry it out for that. It is paying attention to the development of the method of construction to reinforce the maintenance repair of the construction structure thing by using the tip compound factor from such a viewpoint. In the beginning, a material cost was very expensive, and the recognition not to use it was very general in such a construction field. In such recognition, in Tonen Corp. incorporated company, it has paid attention to the use possibility in the construction field of the tip compound factor since early, research and development have been done continuously from 1980, that It succeeds in, and it is the method of construction that a repair reinforces a concrete structure thing by the tip material that the method of construction which got the technological prize of the Japan compound material academic meeting in 1997 moved carbon fiber to the center. (NEDO)

  6. One-to-One Technology in K-12 Classrooms: A Review of the Literature from 2004 through 2014

    Science.gov (United States)

    Harper, Ben; Milman, Natalie B.

    2016-01-01

    This literature review examined empirical research conducted between 2004 and 2014 regarding 1:1 technologies in K-12 educational settings. Our overarching research question was: What does research tell us about 1:1 technology in K-12 classrooms? We used the constant-comparative method to analyze, code, and induce themes from 46 relevant articles.…

  7. Development and implementation of technologies for physical telerehabilitation in Latin America: a systematic review of literature, programs and projects

    OpenAIRE

    Narváez, Fabián; Marín-Castrillón, Diana M; Cuenca, Ma. Cisne; Latta, Ma. Augusta

    2017-01-01

    Abstract Telerehabilitation has arised by the inclusion of emerging technologies for capturing, transmitting, analyzing and visualizing movement patterns associated to musculoskeletal disorders. This therapeutic strategy enables to carry out diagnosis processes and provide rehabilitation treatments. This paper presents a systematic review of the current development and implementation of telerehabilitation technologies in Latin America. The main goal is to explore the scientific literature and...

  8. Willingness to pay for diagnostic technologies: a review of the contingent valuation literature.

    Science.gov (United States)

    Lin, Pei-Jung; Cangelosi, Michael J; Lee, David W; Neumann, Peter J

    2013-01-01

    To understand how people value information from diagnostic technologies, we reviewed and analyzed published willingness-to-pay (WTP) studies on the topic. We searched PubMed for English-language articles related to WTP for diagnostic laboratory tests published from 1985 through 2011. We characterized methodological differences across studies, examined individual- and technology-level factors associated with WTP, and summarized median WTP values across different diagnostic tests. We identified 66 relevant WTP studies. Half focused on oncology, while others analyzed infectious diseases (n = 11, 16.1%) and obstetric or gynecological conditions (n = 8, 11.7%), among others. Most laboratory tests included in studies were biological samples/genetic testing (n = 44, 61.1%) or imaging tests (n = 23, 31.9%). Approximately one third of the analyses (n = 20, 30.3%) used discrete-choice questions to elicit WTP values. Higher income, education, disease severity, perceived disease risk, family history, and more accurate tests were in general associated with higher WTP values for diagnostic information. Of the 44 studies with median WTP values available, most reported a median WTP value below $100. The median WTP value for colon or colorectal cancer screening ranged from below $100 to over $1000. The contingent valuation literature in diagnostics has grown rapidly, and suggests that many respondents place considerable value on diagnostic information. There exists, however, great variation in studies with respect to the type of technologies and diseases assessed, respondent characteristics, and study methodology. The perceived value of diagnostic technologies is also influenced by the study design and elicitation methods. Copyright © 2013 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  9. A technology ecosystem perspective on hospital management information systems: lessons from the health literature.

    Science.gov (United States)

    Bain, Christopher A; Standing, Craig

    2009-01-01

    Hospital managers have a large range of information needs including quality metrics, financial reports, access information needs, educational, resourcing and decision support needs. Currently these needs involve interactions by managers with numerous disparate systems, both electronic such as SAP, Oracle Financials, PAS' (patient administration systems) like HOMER, and relevant websites; and paper-based systems. Hospital management information systems (HMIS) can be thought of sitting within a Technology Ecosystem (TE). In addition, Hospital Management Information Systems (HMIS) could benefit from a broader and deeper TE model, and the HMIS environment may in fact represents its own TE (the HMTE). This research will examine lessons from the health literature in relation to some of these issues, and propose an extension to the base model of a TE.

  10. Technology and economic impacts of mega-sports events: A key issue? Exploratory insights from literature

    Directory of Open Access Journals (Sweden)

    Chanaron Jean Jacques

    2014-01-01

    Full Text Available Mega-sport events such as Olympic Games or Football World Cup are always presented as providing the hosting nation and/or city with huge benefits. Supporters of such events quote economic, social and cultural impacts for the region as well as contributions to scientific and technological progress and innovation. obviously, they need to politically justify the impressive and growing financial investment required by organizing Olympic Games or World Cup. The article aims at looking at a quite abundant academic literature with the objectives of defining the various potential impacts and the methods used for their assessment. It concludes that there is no universal and scientifically valid model for evaluating the benefits of mega-sport events and that organizers should be very cautious when arguing in favor of deciding to host such events.

  11. Radioanalytical technology for 10 CFR Part 61 and other selected radionuclides: Literature review

    International Nuclear Information System (INIS)

    Thomas, C.W.; Thomas, V.W.; Robertson, D.E.

    1996-03-01

    A comprehensive literature review and assessment was conducted to identify and evaluate radioanalytical technology and procedures used for measuring 10CFR61 radionuclides and other long-lived isotopes. This review evaluated radiochemical procedures currently in use at a number of laboratories in the US, as well as identifying new advanced methods and techniques which could be adapted for routine radiochemical analyses of low-level radioactive waste. The 10CFR61 radionuclides include 14 C, 60 Cl, 59,63 Ni, 90 Sr, 94 Nb, 99 Tc, 129 I, 137 Cs, and TRU isotopes with half lives greater than 5 years. Other low-level radionuclides of interest include 7,10 Be, 26 Al, 36 Cl, 93 Mo, 109,113m Cd, and 121m,126 Sn, which may be present in various types of waste streams from nuclear power stations

  12. Technology-Based Interventions for Substance Use and Comorbid Disorders: An Examination of the Emerging Literature.

    Science.gov (United States)

    Sugarman, Dawn E; Campbell, Aimee N C; Iles, Brittany R; Greenfield, Shelly F

    Among individuals with substance use disorders (SUDs), comorbidity with other psychiatric disorders is common and often noted as the rule rather than the exception. Standard care that provides integrated treatment for comorbid diagnoses simultaneously has been shown to be effective. Technology-based interventions (TBIs) have the potential to provide a cost-effective platform for, and greater accessibility to, integrated treatments. For the purposes of this review, we defined TBIs as interventions in which the primary targeted aim was delivered by automated computer, Internet, or mobile system with minimal to no live therapist involvement. A search of the literature identified nine distinct TBIs for SUDs and comorbid disorders. An examination of this limited research showed promise, particularly for TBIs that address problematic alcohol use, depression, or anxiety. Additional randomized, controlled trials of TBIs for comorbid SUDs and for anxiety and depression are needed, as is future research developing TBIs that address SUDs and comorbid eating disorders and psychotic disorders. Ways of leveraging the full capabilities of what technology can offer should also be further explored.

  13. Impact of Radio-Frequency Identification (RFID) Technologies on the Hospital Supply Chain: A Literature Review

    Science.gov (United States)

    Coustasse, Alberto; Tomblin, Shane; Slack, Chelsea

    2013-01-01

    Supply costs account for more than one-third of the average operating budget and constitute the second largest expenditure in hospitals. As hospitals have sought to reduce these costs, radio-frequency identification (RFID) technology has emerged as a solution. This study reviews existing literature to gauge the recent and potential impact and direction of the implementation of RFID in the hospital supply chain to determine current benefits and barriers of adoption. Findings show that the application of RFID to medical equipment and supplies tracking has resulted in efficiency increases in hospitals with lower costs and increased service quality. RFID technology can reduce costs, improve patient safety, and improve supply chain management effectiveness by increasing the ability to track and locate equipment, as well as monitoring theft prevention, distribution management, and patient billing. Despite ongoing RFID implementation in the hospital supply chain, barriers to widespread and rapid adoption include significant total expenditures, unclear return on investment, and competition with other strategic imperatives. PMID:24159272

  14. Operational Water Withdrawal and Consumption Factors for Electricity Generation Technology in China—A Literature Review

    Directory of Open Access Journals (Sweden)

    Jinjing Gao

    2018-04-01

    Full Text Available As two indispensable resources for human development, energy and water are closely related. China, as the world’s largest consumer of electricity, is also experiencing very serious water shortages. Understanding the water consumption intensity in various types of electric power production technologies according to China’s national conditions is a prerequisite for understanding the potential impact of electrical power production on water resources. Therefore, following the steps of a meta-analysis, this paper provides a literature review on operational water withdrawal and consumption factors for electricity generation technology in China. We observed that 50% of water consumption for electricity generation was for coal power, whereas there was no research on the water consumption intensity of natural gas power generation, and a shortage of studies on water intake during electrical power production. The average water consumption intensity of hydropower is the largest. The results indicate that compared with other fuel types, hydropower is not a sustainable energy with respect to water conservation, and the study of hydropower applications should be improved in China.

  15. Scientific publications in public, environmental and occupational health journals by authors from China, Japan and Korea in East Asia: A 10-year literature survey from 2003 to 2012.

    Science.gov (United States)

    Li, Meina; Liu, Xiaodong; Zhang, Lulu

    2015-01-01

    To compare the number and quality of public, environmental and occupational health articles published in international journals from the 3 major non-English speaking countries of East Asia: China, Japan and Korea. Public, environmental and occupational health articles from China, Japan and Korea that were published in 161 journals from 2003 to 2012 were retrieved from the Science Citation Index Expanded (SCIE) database. We recorded the numbers of total articles, impact factors (IF), citations, number of articles in top 10 journals, references as well as the article distribution from various regions in China. From 2003 to 2012, China, Japan and Korea published 5713, 3802 and 1967 papers respectively, with accumulated impact factor of 14 934.55, 8758.36 and 6189.25, the average impact factor of 2.61, 2.30 and 3.15 and the average citation numbers per document of 5.08, 6.49 and 5.25. In the top 10 high-impact public, environmental and occupational health journals, China, Japan and Korea accounted for 50.19%, 20.34% and 29.47% of all the papers published in those journals, respectively. Total impact factors of the most popular 10 papers for China, Japan and Korea were: 26.23, 27.08 and 26.91. Distribution of scientific papers among regions was unbalanced in China, for Hong Kong and Taiwan it accounted for 47.31% of the papers from China. From 2003 to 2012, both the quality and number of papers from China published in public, environmental and occupational health journals have greatly improved. China exceeded Japan and Korea in the number, accumulated impact factor, total citation times and the average number of references, while Korea had the highest average impact factor. Japan had the highest journal impact factor among the most popular journals, and the highest average citation number per document. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  16. Study on tsunami due to offshore earthquakes for Korea coast. Literature survey and numerical simulation on earthquake and tsunami in the Japan Sea and the East China Sea

    International Nuclear Information System (INIS)

    Matsuyama, Masafumi; Aoyagi, Yasuhira; Inoue, Daiei; Choi, Weon-Hack; Kang, Keum-Seok

    2008-01-01

    In Korea, there has been a concern on tsumami risks for the Nuclear Power Plants since the 1983 Nihonkai-Chubu earthquake tsunami. The maximum run-up height reached 4 m to north of the Ulchin nuclear power plant site. The east coast of Korea was also attacked by a few meters high tsunami generated by the 1993 Hokkaido Nansei-Oki earthquake. Both source areas of them were in the areas western off Hokkaido to the eastern margin of the Japan Sea, which remains another tsunami potential. Therefore it is necessary to study tsunami risks for coast of Korea by means of geological investigation and numerical simulation. Historical records of earthquake and tsunami in the Japan Sea were re-compiled to evaluate tsunami potential. A database of marine active faults in the Japan Sea was compiled to decide a regional potential of tsunami. Many developed reverse faults are found in the areas western off Hokkaido to the eastern margin of the Japan Sea. The authors have found no historical earthquake in the East China Sea which caused tunami observed at coast of Korea. Therefore five fault models were determined on the basis of the analysis results of historical records and recent research results of fault parameter and tunami. Tsunami heights were estimated by numerical simulation of nonlinear dispersion wave theory. The results of the simulations indicate that the tsunami heights in these cases are less than 0.25 m along the coast of Korea, and the tsunami risk by these assumed faults does not lead to severe impact. It is concluded that tsunami occurred in the areas western off Hokkaido to the eastern margin of the Japan Sea leads the most significant impact to Korea consequently. (author)

  17. Japan. Wood-Plastic Composites [Status and technology of polymer-containing fibrous materials in the Eastern Hemisphere

    Energy Technology Data Exchange (ETDEWEB)

    Hirayama, T. [Central Research Laboratory, Showa Denko K.K., Ota-Ku, Tokyo (Japan)

    1968-10-15

    Radiation chemistry research has made rapid progress in Japan over the last ten years, and many encouraging results have been obtained with radiation polymerization and graft-polymerization as well as in other fields. Several papers on wood-plastic composites (WPC) have been published in Japanese journals, but very little work on actual applications has been reported. This general review of basic studies and studies of the application of WPC in Japan is divided into three parts: radiation methods, chemical methods (catalyst-heat treatment) and the scope of future research and development.

  18. Healthcare professionals' organisational barriers to health information technologies-a literature review.

    Science.gov (United States)

    Lluch, Maria

    2011-12-01

    This literature review identifies and categorises, from an organisational management perspective, barriers to the use of HIT or ICT for health. Based on the review, it offers policy interventions. This systematic literature review was carried out during December 2009 and January 2010. Additional on-going reviews of updates through automated system alerts took place up until this paper was submitted. A total of thirty-one sources were searched including nine software platforms/databases, fifteen specialised websites/targeted databases, Google Scholar, ISI Science Citation Index and five journals hand-searched. The study covers seventy-nine articles on organisational barriers to ICT adoption by healthcare professionals. These are categorised under five main headings - (I) Structure of healthcare organisations; (II) Tasks; (III) People policies; (IV) Incentives; and (V) Information and decision processes. A total of ten subcategories are also identified. By adopting an organisational management approach, some recommendations to remove organisational management barriers are made. Despite their apparent promise, health information technologies (HIT) have proved difficult to implement. This systematic review reveals the implementation barriers associated to organisational management and their interrelations. Several important future directions in the field are also suggested: (1) there is a need for further research providing evidence of HIT cost-effectiveness as well as the development of optimal HIT applications; (2) more information is needed regarding organisational change, incentives, liability issues, end-users HIT competences and skills, structure and work process issues involved in realising the benefits from HIT. Future policy interventions should consider the five dimensions identified when addressing the impact of HIT in healthcare organisational systems, and how the impact of an intervention aimed at a particular dimension would interrelate with others. 2011

  19. LITERATURE REVIEWS TO SUPPORT ION EXCHANGE TECHNOLOGY SELECTION FOR MODULAR SALT PROCESSING

    International Nuclear Information System (INIS)

    King, W.

    2007-01-01

    This report summarizes the results of literature reviews conducted to support the selection of a cesium removal technology for application in a small column ion exchange (SCIX) unit supported within a high level waste tank. SCIX is being considered as a technology for the treatment of radioactive salt solutions in order to accelerate closure of waste tanks at the Savannah River Site (SRS) as part of the Modular Salt Processing (MSP) technology development program. Two ion exchange materials, spherical Resorcinol-Formaldehyde (RF) and engineered Crystalline Silicotitanate (CST), are being considered for use within the SCIX unit. Both ion exchange materials have been studied extensively and are known to have high affinities for cesium ions in caustic tank waste supernates. RF is an elutable organic resin and CST is a non-elutable inorganic material. Waste treatment processes developed for the two technologies will differ with regard to solutions processed, secondary waste streams generated, optimum column size, and waste throughput. Pertinent references, anticipated processing sequences for utilization in waste treatment, gaps in the available data, and technical comparisons will be provided for the two ion exchange materials to assist in technology selection for SCIX. The engineered, granular form of CST (UOP IE-911) was the baseline ion exchange material used for the initial development and design of the SRS SCIX process (McCabe, 2005). To date, in-tank SCIX has not been implemented for treatment of radioactive waste solutions at SRS. Since initial development and consideration of SCIX for SRS waste treatment an alternative technology has been developed as part of the River Protection Project Waste Treatment Plant (RPP-WTP) Research and Technology program (Thorson, 2006). Spherical RF resin is the baseline media for cesium removal in the RPP-WTP, which was designed for the treatment of radioactive waste supernates and is currently under construction in Hanford, WA

  20. LITERATURE REVIEWS TO SUPPORT ION EXCHANGE TECHNOLOGY SELECTION FOR MODULAR SALT PROCESSING

    Energy Technology Data Exchange (ETDEWEB)

    King, W

    2007-11-30

    This report summarizes the results of literature reviews conducted to support the selection of a cesium removal technology for application in a small column ion exchange (SCIX) unit supported within a high level waste tank. SCIX is being considered as a technology for the treatment of radioactive salt solutions in order to accelerate closure of waste tanks at the Savannah River Site (SRS) as part of the Modular Salt Processing (MSP) technology development program. Two ion exchange materials, spherical Resorcinol-Formaldehyde (RF) and engineered Crystalline Silicotitanate (CST), are being considered for use within the SCIX unit. Both ion exchange materials have been studied extensively and are known to have high affinities for cesium ions in caustic tank waste supernates. RF is an elutable organic resin and CST is a non-elutable inorganic material. Waste treatment processes developed for the two technologies will differ with regard to solutions processed, secondary waste streams generated, optimum column size, and waste throughput. Pertinent references, anticipated processing sequences for utilization in waste treatment, gaps in the available data, and technical comparisons will be provided for the two ion exchange materials to assist in technology selection for SCIX. The engineered, granular form of CST (UOP IE-911) was the baseline ion exchange material used for the initial development and design of the SRS SCIX process (McCabe, 2005). To date, in-tank SCIX has not been implemented for treatment of radioactive waste solutions at SRS. Since initial development and consideration of SCIX for SRS waste treatment an alternative technology has been developed as part of the River Protection Project Waste Treatment Plant (RPP-WTP) Research and Technology program (Thorson, 2006). Spherical RF resin is the baseline media for cesium removal in the RPP-WTP, which was designed for the treatment of radioactive waste supernates and is currently under construction in Hanford, WA

  1. E-learning & information communication technology (ICT) in nursing education: A review of the literature.

    Science.gov (United States)

    Button, Didy; Harrington, Ann; Belan, Ingrid

    2014-10-01

    To examine primary research articles published between January 2001 and December 2012 that focused on the issues for students and educators involved with E-learning in preregistration nursing programs. The literature was systematically reviewed, critically appraised and thematically analyzed. E-learning is arguably the most significant change to occur in nursing education since the move from hospital training to the tertiary sector. Differences in computer and information literacy for both students and educators influence the success of implementation of E-learning into current curricula. Online databases including CINAHL, MEDLINE, OVID, the ProQuest Central, PubMed, ERIC and Science Direct were used. The criteria used for selecting studies reviewed were: primary focus on electronic learning and issues faced by nursing students and/or nurse educators from undergraduate preregistration nursing programs; all articles had to be primary research studies, published in English in peer reviewed journals between January 2001 and December 2012. Analysis of the 28 reviewed studies revealed the following three themes: issues relating to E-learning for students; use of information technologies; educator (faculty) issues involving pedagogy, workload and staff development in E-learning and associated technology. The review highlighted that commencing preregistration nursing students required ongoing education and support surrounding nursing informatics. This support would enable students to progress and be equipped with the life-long learning skills required to provide safe evidence based care. The review also identified the increased time and skill demands placed on nurse educators to adapt their current education methodologies and teaching strategies to incorporate E-learning. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

  2. Beyond taxation: Discourse around energy policy in Japan

    International Nuclear Information System (INIS)

    Endo, Takahiro; Tsuboyama, Yuki; Hara, Yoritoshi

    2016-01-01

    Energy policy literature tends to emphasise the impact of taxation on energy preference. However, the present case concerning extremely low acceptance of diesel cars in Japan could not be explained by taxation. As a possible factor, the paper sheds light upon discourse around the energy policy. The policy aimed to characterise diesel technology as emitting particulate matter and nitrogen oxide (NOx). The paper contributes to extending the existing understanding of the role of public policy by embracing the linguistic interactions complemented by visualisation. - Highlights: • Taxation cannot explain extremely low acceptance of diesel fuelled cars in Japan. • Explore meaning attachment process. • Complementarity between cost-benefit evaluation and meaning attachment.

  3. In vitro fertilization in Japan — Early days of in vitro fertilization and embryo transfer and future prospects for assisted reproductive technology

    Science.gov (United States)

    SUZUKI, Masakuni

    2014-01-01

    Assisted reproductive technology (ART) such as in vitro fertilization (IVF) and embryo transfer (ET) has been essential in the treatment of infertility. The world’s first IVF-ET baby was born in 1978 based on the technique developed by Dr. Robert Edwards and Dr. Patrick Steptoe.1) In Japan, the first IVF-ET birth was reported in 1983 by Prof. Masakuni Suzuki at Tohoku University School of Medicine.2,3) IVF-ET is a procedure used to achieve pregnancy that consists of extracting oocytes from an infertile woman, fertilizing them in vitro, and transferring fertilized eggs into the patient’s uterine cavity (Fig. 1). Since the first report of successful IVF-ET, numerous techniques related to ART, such as cryopreservation of oocytes and embryos, gamete intrafallopian transfer (GIFT), and microinsemination, have been developed and refined (Table 1). Herein we describe the history of basic research in IVF-ET that led to human applications, how the birth of the first IVF-ET baby was achieved in Japan, the current status of ART in Japan, issues related to ART, and future prospects for ART. PMID:24814992

  4. Research and development of grid computing technology in center for computational science and e-systems of Japan Atomic Energy Agency

    International Nuclear Information System (INIS)

    Suzuki, Yoshio

    2007-01-01

    Center for Computational Science and E-systems of the Japan Atomic Energy Agency (CCSE/JAEA) has carried out R and D of grid computing technology. Since 1995, R and D to realize computational assistance for researchers called Seamless Thinking Aid (STA) and then to share intellectual resources called Information Technology Based Laboratory (ITBL) have been conducted, leading to construct an intelligent infrastructure for the atomic energy research called Atomic Energy Grid InfraStructure (AEGIS) under the Japanese national project 'Development and Applications of Advanced High-Performance Supercomputer'. It aims to enable synchronization of three themes: 1) Computer-Aided Research and Development (CARD) to realize and environment for STA, 2) Computer-Aided Engineering (CAEN) to establish Multi Experimental Tools (MEXT), and 3) Computer Aided Science (CASC) to promote the Atomic Energy Research and Investigation (AERI). This article reviewed achievements in R and D of grid computing technology so far obtained. (T. Tanaka)

  5. [Technostress in Communication and Technology Society: Scoping Literature Review from the Web of Science].

    Science.gov (United States)

    Cuervo Carabel, Tatiana; Orviz Martínez, Natalia; Arce García, Sergio; Fernández Suárez, Iván

    To perform a scoping review on the state of the art of technostress, an emerging risks associated with the growing use of Information and Communication Technologies (ICT) in society. a scoping review on technostress at work was performed using the Web of Science (WoS), using the key term "technostress work". The search was completed with a literature review of the selected articles. A total of 58 articles were identified, of which 30 were selected for full-text in-depth review. The manual search of the bibliography allowed us to analyze an additional 14 articles. Most of articles focus on the analysis on the precipitating and alleviating factors of technostress in workers, as well as the main consequences of the materialization of this risk on worker performance. There is a lack of empirical studies that allow organizations to establish strategies to adequately manage technostress. there is a need to delve further into technostress through empirical studies that are not only focused on proposing theoretical models for its conceptualization or identifying its consequences in organizations, but on proposing management strategies that reduce the impact of this new labor reality. Future lines of research are proposed to understand and adequately manage technostress in workers. Copyright belongs to the Societat Catalana de Salut Laboral.

  6. Micro/Nanospheres Generation by Fluid-Fluid Interaction Technology: A Literature Review.

    Science.gov (United States)

    Lei, Lei; Bergstrom, Don; Zhang, Bing; Zhang, Hongbo; Yin, Ruixue; Song, Ki-Young; Zhang, Wenjun

    2017-01-01

    This review focuses on the fundamental fluid mechanics which governs the generation of micro/nanospheres. The micro/nanosphere generation process has gathered significant attention in the past two decades, since micro/nanospheres are widely used in drug delivery, food science, cosmetics, and other application areas. Many methods have been developed based on different operating principles, such as microfluidic methods, electrospray methods, chemical methods, and so forth. This paper focuses on microfluidic methods. Although the structure of the microfluidic devices may be different, the operating principles behind them are often very similar. Following an initial discussion of the fluid mechanics related to the generation of microspheres, various design approaches are discussed, including T-junction, flow focusing, membrane emulsification, modified T-junction, and double emulsification methods. The advantages and problems associated with each method are also discussed. Next, the most commonly used computational fluid dynamics (CFD) methods are reviewed at three different levels: microscopic, mesoscopic, and macroscopic. Finally, the issues identified in the current literature are discussed, and some suggestions are offered regarding the future direction of technology development related to micro/nanosphere generation. Few relevant patents to the topic have been reviewed and cited. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  7. ETHICS OF SMART HOUSE WELFARE TECHNOLOGY FOR OLDER ADULTS: A SYSTEMATIC LITERATURE REVIEW.

    Science.gov (United States)

    Sánchez, Veralia Gabriela; Taylor, Ingrid; Bing-Jonsson, Pia Cecilie

    2017-01-01

    The University College of Southeast Norway has an on-going project to develop a smart house welfare system to allow older adults and people with disabilities to remain in their homes for as long as they wish in safe, dignified, living conditions. This article reviews reported ethical challenges to implementing smart houses for older adults. A systematic literature review identified twenty-four articles in English, French, Spanish, and Norwegian, which were analyzed and synthesized using Hofmann's question list to investigate the reported ethical challenges. Smart houses offer a promising way to improve access to home care for older adults and people with disabilities. However, important ethical challenges arise when implementing smart houses, including cost-effectiveness, privacy, autonomy, informed consent, dignity, safety, and trust. The identified ethical challenges are important to consider when developing smart house systems. Due to the limitations of smart house technology, designers and users should be mindful that smart houses can achieve a safer and more dignified life-style but cannot solve all the challenges related to ageing, disabilities, and disease. At some point, smart houses can no longer help persons as they develop needs that smart houses cannot meet.

  8. Information and communication technology for managing pain in palliative care: a review of the literature.

    Science.gov (United States)

    Allsop, Matthew J; Taylor, Sally; Mulvey, Matthew R; Bennett, Michael I; Bewick, Bridgette M

    2015-12-01

    Information and communication technology (ICT) systems are being developed for electronic symptom reporting across different stages of the cancer trajectory with research in palliative care at an early stage. This paper presents the first systematic search of the literature to review existing ICT systems intended to support management of pain in palliative care patients with cancer. The review was conducted according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines for systematic reviews and meta-analyses. Four databases (Embase, MEDLINE, PsycINFO and Healthcare Management Information Consortium) from 1990 to December 2012 were searched, with exclusion of papers based on their description of ICT systems and language used. 24 articles met the inclusion criteria, many of which reported the use of non-experimental research designs. Studies were identified at different stages of development with no systems having reached implementation. Most systems captured pain as part of quality-of-life measurement with wide variation in approaches to pain assessment. ICT systems for symptom reporting are emerging in the palliative care context. Future development of ICT systems need to increase the quality and scale of development work, consider how recommendations for pain measurement can be integrated and explore how to effectively use system feedback with patients. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  9. Industrial lasers in Japan

    Science.gov (United States)

    Karube, Norio

    1991-03-01

    I am to report on some aspects of industrial lasers in Japan. Mostly centering on the market. In Japan, the history of laser developnent is rather profound. And long. Ever since the first invention of the laser in this country in 1960. This is partly because of the fact that in Japan the spectroscopic studies of the ruby was very popular in the late 1950's. Ever since niost of the work has been done in the research laboratories of the industry, not in the universities or not in the governmental laboratories. And since that time our first activity was mainly centering on the basic research, but after that time we have the evolution of the technology. One of the features in Japan is that the activity of developement and research of laser technology from the very basic phase up to the present commercialization has been done by the same group of people, including ine. We had a national project which ended about six years ago which was sponsored by MITI. MITI is Ministry of International Trade and Industry in Japan. And because of this national project, the effect of this project had a very enlightening effect in Japan. And after that our Japanese laser market became very flourishing.

  10. The internationalization of Japan

    International Nuclear Information System (INIS)

    Kuroki, T.E.

    1989-01-01

    There are growing tensions and frictions between the U.S. and Japan. Among them are science and technology issues that relate to the development of superconductor technology, as well as economic, trade and agricultural issues. The structure of this friction is very complex. There are many interconnected issues that cannot be resolved one by one. This article focuses on the relationship between the U.S. and Japan. Some of the complexities behind the issues are discussed by defining different notions of internationalization and by presenting the positive and negative aspects of the Japanese approach that affects the future cooperation and competition between our nations in the area of superconductivity

  11. A Survey of the Literature on Unintended Consequences Associated with Health Information Technology: 2014–2015

    Science.gov (United States)

    Abraham, J.; Novak, L. L.; Reynolds, T. L.; Gettinger, A.

    2016-01-01

    Summary Objective To summarize recent research on unintended consequences associated with implementation and use of health information technology (health IT). Included in the review are original empirical investigations published in English between 2014 and 2015 that reported unintended effects introduced by adoption of digital interventions. Our analysis focuses on the trends of this steam of research, areas in which unintended consequences have continued to be reported, and common themes that emerge from the findings of these studies. Method Most of the papers reviewed were retrieved by searching three literature databases: MEDLINE, Embase, and CINAHL. Two rounds of searches were performed: the first round used more restrictive search terms specific to unintended consequences; the second round lifted the restrictions to include more generic health IT evaluation studies. Each paper was independently screened by at least two authors; differences were resolved through consensus development. Results The literature search identified 1,538 papers that were potentially relevant; 34 were deemed meeting our inclusion criteria after screening. Studies described in these 34 papers took place in a wide variety of care areas from emergency departments to ophthalmology clinics. Some papers reflected several previously unreported unintended consequences, such as staff attrition and patients’ withholding of information due to privacy and security concerns. A majority of these studies (71%) were quantitative investigations based on analysis of objectively recorded data. Several of them employed longitudinal or time series designs to distinguish between unintended consequences that had only transient impact, versus those that had persisting impact. Most of these unintended consequences resulted in adverse outcomes, even though instances of beneficial impact were also noted. While care areas covered were heterogeneous, over half of the studies were conducted at academic medical

  12. Towards describing co-design by the integration of Engineering Design and Technology and Innovation Management literature

    DEFF Research Database (Denmark)

    Parraguez, Pedro; Maier, Anja

    2012-01-01

    in the fields of Engineering Design (ED) and Technology and Innovation Management (TIM). Interactions between design and third parties in a range of co-design situations are examined via a targeted literature review, and a map is developed containing a network of keywords. As a result of this review, key...

  13. Faculty Perceptions about Teaching Online: Exploring the Literature Using the Technology Acceptance Model as an Organizing Framework

    Science.gov (United States)

    Wingo, Nancy Pope; Ivankova, Nataliya V.; Moss, Jacqueline A.

    2017-01-01

    Academic leaders can better implement institutional strategic plans to promote online programs if they understand faculty perceptions about teaching online. An extended version of a model for technology acceptance, or TAM2 (Venkatesh & Davis, 2000), provided a framework for surveying and organizing the research literature about factors that…

  14. Technological solution for the protection of the environment (in the Central Research Inst. of Electric Power Industry, Tokyo, Japan)

    International Nuclear Information System (INIS)

    Glamochanin, Vlastimir

    1997-01-01

    As we approach the 21 century, the world finds itself confronting challenges regarding global-scale issues: economic development, the use of energy and natural resources, and environmental preservation. Moreover, these issues do not exist in a vacuum; they are all interrelated. They exert delicate effects on each other and can not be considered separately. If we continue as we have in the past, the earth will face an unprecedented crisis in the middle of coming century, in conjunction with the population explosion. (Susumu Yoda, President of the Central Research Inst. of Electric Power Industry, Tokyo, Japan). This paper presents a brief review of the research policy of the Japan Central Research Inst. of Electric Power Industry, regarding environmental preservation

  15. How to recover credibility of nuclear technologies in Japan where people wish to have 'Anshin'

    International Nuclear Information System (INIS)

    Yasui, Itaru

    2014-01-01

    Although it is inevitable to recover credibility of utilities, there are no clear ways to realize a final target yet. Credibility issue is a very difficult especially in Japan, where the word of 'Anshin' has special importance in the mind of people. In this paper, the word of 'Anshin' in Japan was discussed in order to find out differences in other countries by comparison of culture and customs, especially ways to prepare food, i.e. agriculture and hunting and gathering and so on. The meanings of 'Anshin' were decomposed into several elements, and each element was discussed and clarified. Human factor is important in both operation of plants and risk communication. The philosophy and attitude of COE of utilities are those of very important factors to regain credibility. The utilities' responsibilities are important, but not enough by themselves. In order to assure transparency of information used in risk communication, improvement of people's scientific literacy and their attitude to elect their representatives are absolutely necessary. Especially, risk information related to Level 3 RPA to be opened to public have to be fully transparent. Risk is one of most difficult concept for Japanese people to handle. The reoperation issue of nuclear power plants will involve several difficulties, but challenges to overcome this issue will be a good chance to change a way of decision making in Japan. (author)

  16. Designing Patient-facing Health Information Technologies for the Outpatient Settings: A Literature Review

    Directory of Open Access Journals (Sweden)

    Yushi Yang

    2016-04-01

    Full Text Available Introduction: The implementation of health information technologies (HITs has changed the dynamics of doctor–patient communication in outpatient settings. Designing patient-facing HITs provides patients with easy access to healthcare information during the visit and has the potential to enhance the patient-centred care.   Objectives: The objectives of this study are to systematically review how the designs of patient-facing HITs have been suggested and evaluated, and how they may potentially affect the doctor–patient communication and patient-centred care.   Method: We conducted an online database search to identify articles published before December 2014 relevant to the objectives of this study. A total of nine papers have been identified and reviewed in this study.   Results: Designing patient-facing HITs is at an early stage. The current literature has been exploring the impact of HITs on doctor–patient communication dynamics. Based on the findings of these studies, there is an emergent need to design more patient-centred HITs. There are also some papers that focus on the usability evaluation of some preliminary prototypes of the patient-facing HITs. The design styles of patient-facing HITs included sharing the health information with the patients on: (1 a separate patient display, (2 a projector, (3 a portable tablet, (4 a touch-based screen and (5 a shared computer display that can be viewed by both doctors and patients. Each of them had the strengths and limitations to facilitate the patient-centred care, and it is worthwhile to make a comparison of them in order to identify future research directions.   Conclusion: The designs of patient-facing HITs in outpatient settings are promising in facilitating the doctor-patient communication and patient engagement. However, their effectiveness and usefulness need to be further evaluated and improved from a systems perspective.

  17. Health care consumers' experiences of information communication technology--a summary of literature.

    Science.gov (United States)

    Akesson, Kerstin M; Saveman, Britt-Inger; Nilsson, Gunilla

    2007-09-01

    There is an increasing interest in reaching consumers directly through the Internet and different telecommunication systems. The most important contacts in health care will always be the face-to-face meetings, but the tools of health informatics can be seen as a means to an end, which is to provide the best possible health care. A variety of applications have been described in different references. To our knowledge there has been no review of a research-based state of the art in the field of consumers' experiences in using different applications in health informatics. According to the benefits in using information communication technology (ICT) as being cost-effective and timesaving it is of great importance to focus on and examine consumers' experiences. It is important that it is user friendly and regarded as valuable and useful. The aim of this study was to describe consumers' subjective experiences of using electronic resources with reference to health and illness. DESIGN AND/OR METHOD: A systematic literature search was performed in databases CINAHL, Medline and Cochrane, as well as a manual search. Retrieved references (n=14) were appraised according to their scientific structure and quality. A broad search was performed in order to find as many different applications as possible. Our primary intention was to identify existing references describing consumers' experiences with ICT. In spite of this broad search few references were found. Twelve references remained and three themes were identified: support and help, education and information, and telecommunication instead of on-site visiting. Consumers felt more confident and empowered, their knowledge increased and their health status improved due to the ICT resources. Lack of face-to-face meetings or privacy did not appear to be a problem. ICT can improve the nurse-patient relationship and augment well-being for consumers. More research is needed to measure consumers' experiences and factors that influence it

  18. Designing Patient-facing Health Information Technologies for the Outpatient Settings: A Literature Review.

    Science.gov (United States)

    Yang, Yushi; Asan, Onur

    2016-04-06

      The implementation of health information technologies (HITs) has changed the dynamics of doctor-patient communication in outpatient settings. Designing patient-facing HITs provides patients with easy access to healthcare information during the visit and has the potential to enhance the patient-centred care.  The objectives of this study are to systematically review how the designs of patient-facing HITs have been suggested and evaluated, and how they may potentially affect the doctor-patient communication and patient-centred care.  We conducted an online database search to identify articles published before December 2014 relevant to the objectives of this study. A total of nine papers have been identified and reviewed in this study.  Designing patient-facing HITs is at an early stage. The current literature has been exploring the impact of HITs on doctor-patient communication dynamics. Based on the findings of these studies, there is an emergent need to design more patient-centred HITs. There are also some papers that focus on the usability evaluation of some preliminary prototypes of the patient-facing HITs. The design styles of patient-facing HITs included sharing the health information with the patients on: (1) a separate patient display, (2) a projector, (3) a portable tablet, (4) a touch-based screen and (5) a shared computer display that can be viewed by both doctors and patients. Each of them had the strengths and limitations to facilitate the patient-centred care, and it is worthwhile to make a comparison of them in order to identify future research directions.  The designs of patient-facing HITs in outpatient settings are promising in facilitating the doctor-patient communication and patient engagement. However, their effectiveness and usefulness need to be further evaluated and improved from a systems perspective.

  19. Entomological journals and publishing in Japan.

    Science.gov (United States)

    Fukatsu, Takema

    Here I present an overview of entomological journals and publishing in Japan, thereby providing a convenient portal to the valuable scientific resources for the world's entomological researchers and scientific communities. Currently, except for several international journals published fully in English such as Applied Entomology and Zoology and Entomological Science , many entomological and entomology-related journals in Japan are not indexed by major scientific databases like Web of Science, and therefore they are neither conveniently recognizable nor accessible for the world's entomological communities. However, I point out that many of the contents of such journals are freely available via Japan's public platforms for electronic scientific literature, Japan Science and Technology Information Aggregator, Electronic (J-stage) or Citation Information by National Institute of Informatics (CiNii). Here I list 32 entomological and entomology-related societies and their 45 journals, the majority of which belong to either the Union of Japanese Societies for Insect Sciences (UJSIS), the Union of the Japanese Societies for Systematic Biology (UJSSB), the Union of Japanese Societies for Natural History (UJSNH), or the Union of Japanese Societies for Biological Science (UJSBS), with their respective URL and open-access availability.

  20. FY 2000 report on the survey of energy conservation technology in Japan; 2000 nendo chosa hokoku. Nihon kokunai no sho energy gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of supporting self-help efforts to deal with energy environmental problems in developing countries in the Asian region, etc. and making the transfer of the energy conservation technology and petroleum substituting energy technology that are at a practical stage and are owned by Japan, evaluation of each technology was conducted in terms mainly of applicability for a model project. The existing survey data were supplemented/deleted. As the model project supposing the application to developing countries in Asia, types of industry for survey were selected as follows: iron/steel, nonferrous metal, chemical industry, oil refining, ceramics/earthware, paper/pulp, foodstuffs, textile/spinning, electricity (power generation)/gas, technologies common to all industry types. Technologies for survey were energy saving production facilities and energy saving equipment at plant with a regular scale to which the applicability as the model project was supposed. The energy saving effect was all calculated in TOE, and the method to calculate the effect was also described. The paper further described possibilities of introduction/spread of the said technologies to developing countries in Asia, introduction limitation/preconditions, cost vs. effect, etc. (NEDO)

  1. The state of the art report on the development of manufacturing technology of fusion reactor FW blanket and mock-up in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. Y.; Jeong, Y. H.; Baek, J. H.; Kim, J. H.; Kim, H. G

    2004-08-15

    The joining technology of first wall blanket has been developed by JAERI in collaboration with Kawasaki Heavy Industry, Isuau Motors and University of Tsukuba in Japan. A variety of joining technologies including HIP, brazing, casing and friction welding was applied to the manufacturing of SS/SS and Cu/SS joint. In Be/Cu joining, it was emphasized to find the optimal HIP temperature lower than 650 .deg. C in order to avoid excessive SS sensitization because the joining of Be tile to Cu heat sink is a final processing step in the manufacturing of FW blanket. The selected HIP condition were 620 .deg. C, 150MPa and 2hr with Cu interlayer. Sample tests for joints was completed by 1995. The small scale mockup was manufactured and its performance was qualified by end of 2000. From 2001, the manufacturing and the characterization has been carried out for the larger scale mockup.

  2. The state of the art report on the development of manufacturing technology of fusion reactor FW blanket and mock-up in Japan

    International Nuclear Information System (INIS)

    Park, J. Y.; Jeong, Y. H.; Baek, J. H.; Kim, J. H.; Kim, H. G.

    2004-08-01

    The joining technology of first wall blanket has been developed by JAERI in collaboration with Kawasaki Heavy Industry, Isuau Motors and University of Tsukuba in Japan. A variety of joining technologies including HIP, brazing, casing and friction welding was applied to the manufacturing of SS/SS and Cu/SS joint. In Be/Cu joining, it was emphasized to find the optimal HIP temperature lower than 650 .deg. C in order to avoid excessive SS sensitization because the joining of Be tile to Cu heat sink is a final processing step in the manufacturing of FW blanket. The selected HIP condition were 620 .deg. C, 150MPa and 2hr with Cu interlayer. Sample tests for joints was completed by 1995. The small scale mockup was manufactured and its performance was qualified by end of 2000. From 2001, the manufacturing and the characterization has been carried out for the larger scale mockup

  3. Motivating and Justifiable: Teaching Western Literature to EFL Students at a University of Science and Technology

    Science.gov (United States)

    Su, Shao-Wen

    2010-01-01

    While literature-based instruction has been highly praised for its pedagogical benefits, it confronts entrenched learning hindrances, both linguistic and cultural in EFL settings. Whether the literature instruction in practice is motivating or demotivating is an issue worthy of concern. In response to the issue, this paper examines a literature…

  4. Attitude of senior citizens towards smart home technologies:a literature review

    OpenAIRE

    Hamal Mishra, Binisha

    2015-01-01

    Smart home can be of significant importance for positive ageing allowing elderly to maintain independence, functionality, well-being and higher quality of life. Aim: The aim of this thesis is to study attitude of senior citizens towards smart home technologies. Understanding senior citizen's attitude towards current smart home technol-ogies is an important aspect in optimization of the existing technologies as well as in the design of new technologies. The review will aim to find the answe...

  5. Healthcare professional behaviour change using technological supports: A realist literature review

    OpenAIRE

    Chris Keyworth; Jo Hart; Chris A. Armitage

    2015-01-01

    Background Changing healthcare professional behaviour is fundamental to effective patient management. Recent systematic reviews examining healthcare professional behaviour change interventions (such as audit and feedback) suggest that technological support is likely to be crucial in helping healthcare professionals to improve patient outcomes. However we know little about the effectiveness of technological support interventions, and whether the design of technological support interventions...

  6. Technology trend and production statistics of gas turbines and superchargers in Japan in 1992. ; Aircraft gas turbine

    Energy Technology Data Exchange (ETDEWEB)

    Takeo, K [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

    1992-01-01

    Research and developments programs of aircraft gas turbines in Japan have been firmly proceeding. The Japanese Aero Engine Corporation(JAEC) has completed V2500 aircraft engines and this engine is going to be installed on MD90 aircraft. Intensive development activities have been proceeded in large engines which will cover the thrust of up to 90,000 LBF. Engines for 75-100 seat aircraft has been under study which is basically a high bypass turbofan in the thrust class of 12,000-20,000 LBF with low noise, low emission level. The research works for Super/Hypersonic Transport Propulsion System have been conducted by the Japanese engine manufacturers and four foreign companies (GE, UTC, RR and SNECMA). Japan defence agency with joint participation with MHI, IHI and KHI has been conducting a research demonstrator program of the small turbofan engine with reheat called XF3-400. National Aerospace Laboratory(NAL) and Space and Aeronautical Science(ISAS) have been conducting research program on air-turbo-ramjet and turbo-ramjet engine. 2 figs.

  7. Networking Japan

    DEFF Research Database (Denmark)

    Hansen, Annette Skovsted

    Human Resource Development was the first and remains an important pillar in Japanese foreign aid. I will argue that Japan has access to a global network of alumni who will co-define Japanese foreign aid in the future, because Japan has encouraged alumni societies and networking since 1965. A total...... of more than a million people in more than 100 countries have attended courses in Japan funded fully or partly by Japanese ODA since the inception of the technical assistance programs in 1954 through the Colombo Plan and since 1959 through the Association of Overseas Technical Scholarships (AOTS from 2009...... HIDA). Many of these alumni have and will in the future exchange ideas and keep contact not only to Japan, but also to fellow alumni around the globe and, thereby, practice south-south exchanges, which are made possible and traceable by their established alumni network and the World Network of Friends...

  8. Methods, strategies and technologies used to conduct a scoping literature review of collaboration between primary care and public health.

    Science.gov (United States)

    Valaitis, Ruta; Martin-Misener, Ruth; Wong, Sabrina T; MacDonald, Marjorie; Meagher-Stewart, Donna; Austin, Patricia; Kaczorowski, Janusz; O-Mara, Linda; Savage, Rachel

    2012-07-01

    This paper describes the methods, strategies and technologies used to conduct a scoping literature review examining primary care (PC) and public health (PH) collaboration. It presents challenges encountered as well as recommendations and 'lessons learned' from conducting the review with a large geographically distributed team comprised of researchers and decision-makers using an integrated knowledge translation approach. Scoping studies comprehensively map literature in a specific area guided by general research questions. This methodology is especially useful in researching complex topics. Thus, their popularity is growing. Stakeholder consultations are an important strategy to enhance study results. Therefore, information about how best to involve stakeholders throughout the process is necessary to improve quality and uptake of reviews. This review followed Arksey and O'Malley's five stages: identifying research questions; identifying relevant studies; study selection; charting the data; and collating, summarizing and reporting results. Technological tools and strategies included: citation management software (Reference Manager®), qualitative data analysis software (NVivo 8), web conferencing (Elluminate Live!) and a PH portal (eHealthOntario), teleconferences, email and face-to-face meetings. Of 6125 papers identified, 114 were retained as relevant. Most papers originated in the United Kingdom (38%), the United States (34%) and Canada (19%). Of 80 papers that reported on specific collaborations, most were descriptive reports (51.3%). Research studies represented 34 papers: 31% were program evaluations, 9% were literature reviews and 9% were discussion papers. Key strategies to ensure rigor in conducting a scoping literature review while engaging a large geographically dispersed team are presented for each stage. The use of enabling technologies was essential to managing the process. Leadership in championing the use of technologies and a clear governance

  9. Building and managing strategic alliances in technology-driven start-ups: a critical review of literature

    OpenAIRE

    Comi, Alice; Eppler, Martin J.

    2009-01-01

    In this article, we critically review the current literature on alliance formation and management with a particular emphasis on small businesses, and on managerial implications for start-up enterprises. In the beginning of the article, we discuss the advantages and the challenges of inter-organizational collaboration, by taking the perspective of technology-driven start-ups operating in highly competitive environments. We then review the managerial advice suggested by the current liter...

  10. Fiscal 1999 technical survey report. Survey of energy conservation technologies in Japan; 1999 nendo kokunai no sho energy gijutsu ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    NEDO (New Energy and Industrial Technology Development Organization), in its effort to implement a joint project with importing countries, endeavors to popularize energy conservation technologies by introducing them into plants in the importing countries and by demonstrating their validity on real systems. Energy conservation technologies in use in Japan's steelmaking, cement making, chemical, and oil refining industries were reassessed in view of their usefulness in the above-said project. During the reassessment, they were analyzed also for cost effectiveness for the scales on which they would possibly be introduced. Ninety-four technologies were reassessed, which involved the top pressure recovery facilities, continuous casting facilities, high frequency melting furnace, and high efficiency sintering furnace ignition device, these for the steelmaking industry; the materials crushing vertical roller mill, NSP (new suspension preheater) type cement calcination kiln, finishing process preliminary crusher, urban wastes conversion into materials for cement making or into fuel, these for the cement making industry; the multi-effect evaporator for an ammonia manufacturing process and the device for collecting waste heat at the outlet of a synthetic gas compressor, these for the chemical industry; and reduction in the amount of injection steam by use of vacuum distillation tower top steam recycling, etc., these in relation with oil refining facilities. (NEDO)

  11. Report on survey in fiscal 2000 on the survey on succession of history of industrial technologies. Survey edition of originality and creativity of industrial machine technologies in Japan; 2000 nendo sangyo gijutsu rekishi keisho chsao hokokusho. Kokunai sangyo kikai gijutsu no dokusosei to sozosei noc hosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to clarify the innovation process of industrial technologies in Japan and the originality and creativity seen in the process, the case history has been introduced in relation with the researchers, engineers, and business proprietors having contributed to the innovation, and their work records. With regard to machine tools, detailed introductions were given to 'Toshisuke Takeo' who had the technological concept learned in the United States, and devoted himself in building modern machine tools, an American, 'Willian R. Gorham', who had worked actively in Japan even during the war, 'Hiroshi Hanaoka' who had made a machining center for the first time in Japan, and 'Shinkichi Nagaoka' a developer of the non-circular flat bearing. In the railway area, 'Richard Francis Trevithick' and 'Francis Henry Trevithick' , leaders of the rolling stock manufacturing technologies, 'Yasujiro Shima' who had contributed to building the foundation of the Japan's rolling stock technologies, 'Kiichi Asakura' who had contributed to establishment of the Japan's rolling stock technologies and industry standardization, and 'Hideo Shima' who had borne fruit of systematization of the Japan's railway technologies by building the Shinkansen were introduced in detail. (NEDO)

  12. Literature review on monitoring technologies and their outcomes in independently living elderly people.

    Science.gov (United States)

    Peetoom, Kirsten K B; Lexis, Monique A S; Joore, Manuela; Dirksen, Carmen D; De Witte, Luc P

    2015-07-01

    To obtain insight into what kind of monitoring technologies exist to monitor activity in-home, what the characteristics and aims of applying these technologies are, what kind of research has been conducted on their effects and what kind of outcomes are reported. A systematic document search was conducted within the scientific databases Pubmed, Embase, Cochrane, PsycINFO and Cinahl, complemented by Google Scholar. Documents were included in this review if they reported on monitoring technologies that detect activities of daily living (ADL) or significant events, e.g. falls, of elderly people in-home, with the aim of prolonging independent living. Five main types of monitoring technologies were identified: PIR motion sensors, body-worn sensors, pressure sensors, video monitoring and sound recognition. In addition, multicomponent technologies and smart home technologies were identified. Research into the use of monitoring technologies is widespread, but in its infancy, consisting mainly of small-scale studies and including few longitudinal studies. Monitoring technology is a promising field, with applications to the long-term care of elderly persons. However, monitoring technologies have to be brought to the next level, with longitudinal studies that evaluate their (cost-) effectiveness to demonstrate the potential to prolong independent living of elderly persons. [Box: see text].

  13. Japan's advanced medicine.

    Science.gov (United States)

    Sho, Ri; Narimatsu, Hiroto; Murakami, Masayasu

    2013-10-01

    Like health care systems in other developed countries, Japan's health care system faces significant challenges due to aging of the population and economic stagnation. Advanced medicine (Senshin Iryou) is a unique system of medical care in Japan offering highly technology-driven medical care that is not covered by public health insurance. Advanced medicine has recently developed and expanded as part of health care reform. Will it work? To answer this question, we briefly trace the historical development of advanced medicine and describe the characteristics and current state of advanced medical care in Japan. We then offer our opinions on the future of advanced medicine with careful consideration of its pros and cons. We believe that developing advanced medicine is an attempt to bring health care reform in line rather than the goal of health care reform.

  14. In-plane technologies for transflective mobile displays: A Literature Survey

    NARCIS (Netherlands)

    Strömer, J.F.

    2007-01-01

    This report discusses the optical design of transflective displaysusing in-plane technologies, such as IPS or FFS. It demonstrates theevolutional develpement of the technology of important companies and Universities that are active in this area. It discusses relevant theoretical studies and

  15. Promising Practices: A Literature Review of Technology Use by Underserved Students

    Science.gov (United States)

    Zielezinski, Molly B.; Darling-Hammond, Linda

    2016-01-01

    How can technologies and digital learning experiences be used to support underserved, under-resourced, and underprepared students? For many years, educators, researchers, and policy makers looking for strategies to close the achievement gap and improve student learning have sought solutions involving new uses of technology, especially for students…

  16. Has Research on Collaborative Learning Technologies Addressed Massiveness? A Literature Review

    Science.gov (United States)

    Manathunga, Kalpani; Hernández-Leo, Davinia

    2015-01-01

    There is a growing interest in understanding to what extent innovative educational technologies can be used to support massive courses. Collaboration is one of the main desired elements in massive learning actions involving large communities of participants. Accumulated research in collaborative learning technologies has proposed and evaluated…

  17. A patient with spontaneous rupture of the esophagus and concomitant gastric cancer whose life was saved: case of report and review of the literature in Japan

    Directory of Open Access Journals (Sweden)

    Matsuhashi Nobuhisa

    2011-12-01

    Full Text Available Abstract A 71-year-old man suddenly developed abdominal pain and vomiting on drinking soda after a meal, and visited a physician. Cervical subcutaneous and mediastinal emphysemas were observed on CT, and the patient was transferred to the emergency medical center of our hospital on the same day. Esophagography was performed at our department. A ruptured region was identified on the left side of the lower thoracic esophagus, and surgery was emergently performed employing sequential left thoracoabdominal incision. The chest wall was adhered due to inflammation, and large amounts of residual food and sloughing were present in the thoracic cavity and mediastinum. Moreover, necrotic changes were noted in the superior through inferior mediastinum. An about 2-cm rupture site was confirmed on the left side of the lower thoracic esophagus and closed by suture and filling with pediculate omentum. The presence of a tumorous lesion located mainly in the body of the stomach and lymph node enlargement were also diagnosed before surgery, for which gastric and intestinal fistulae were inserted to prepare for the second-stage surgery. The patient was admitted to an ICU after surgery. ARDS and MRSA-induced pneumonia and enteritis concomitantly developed but remitted. Curative surgery for gastric cancer was performed at 40 POD. Spontaneous rupture of the esophagus is relatively rare and that complicated by gastric caner is very rare, with only six cases being reported in Japan. Herein, we report the case.

  18. Psychometric properties of the 25-item Work Limitations Questionnaire in Japan: factor structure, validity, and reliability in information and communication technology company employees.

    Science.gov (United States)

    Kono, Yuko; Matsushima, Eisuke; Uji, Masayo

    2014-02-01

    The 25-item Work Limitations Questionnaire (WLQ-25) measures presenteeism but has not been sufficiently validated in a Japanese population. A total of 451 employees from four information technology companies in Tokyo completed the WLQ-25 and questionnaires of other variables on two occasions, 2 weeks apart. The WLQ-25 yielded a two-factor structure: Cognitive Demand and Physical Demand. These subscales showed good internal consistency, and both were associated with adverse working conditions, greater perceived job strain, lower skill use, poorer workplace social support, and less satisfactory psychological adjustment. Intraclass correlation coefficients of the two WLQ-25 subscales between time 1 and time 2 were 0.78 and 0.55, respectively. This study suggests acceptable psychometric properties of the WLQ-25 in Japan.

  19. The Effects of ICT Environment on Teachers' Attitudes and Technology Integration in Japan and the U.S.

    Science.gov (United States)

    Kusano, Kodai; Frederiksen, Sarah; Jones, LeAnne; Kobayashi, Michiko; Mukoyama, Yui; Yamagishi, Taku; Sadaki, Kengo; Ishizuka, Hiroki

    2013-01-01

    The present study analyzes the effects of Information and Communication Technology (ICT) environment on teachers' attitude toward technology integration in Japanese and U.S. elementary schools. Teacher's attitude plays an important role in influencing the effectiveness of ICT education from a variety of perspectives. A number of studies have been…

  20. Does smart home technology prevent falls in community-dwelling older adults: a literature review.

    Science.gov (United States)

    Pietrzak, Eva; Cotea, Cristina; Pullman, Stephen

    2014-01-01

    Falls in older Australians are an increasingly costly public health issue, driving the development of novel modes of intervention, especially those that rely on computer-driven technologies. The aim of this paper was to gain an understanding of the state of the art of research on smart homes and computer-based monitoring technologies to prevent and detect falls in the community-dwelling elderly. Cochrane, Medline, Embase and Google databases were searched for articles on fall prevention in the elderly using pre-specified search terms. Additional papers were searched for in the reference lists of relevant reviews and by the process of 'snowballing'. Only studies that investigated outcomes related to falling such as fall prevention and detection, change in participants' fear of falling and attitudes towards monitoring technology were included. Nine papers fulfilled the inclusion criteria. The following outcomes were observed: (1) older adults' attitudes towards fall detectors and smart home technology are generally positive; (2) privacy concerns and intrusiveness of technology were perceived as less important to participants than their perception of health needs and (3) unfriendly and age-inappropriate design of the interface may be one of the deciding factors in not using the technology. So far, there is little evidence that using smart home technology may assist in fall prevention or detection, but there are some indications that it may increase older adults' confidence and sense of security, thus possibly enabling aging in place.

  1. The Science-Technology-Society Framework for Achieving Scientific Literacy: An Overview of the Existing Literature

    Science.gov (United States)

    Autieri, Steven M.; Amirshokoohi, Aidin; Kazempour, Mahsa

    2016-01-01

    This literature review intends to highlight some of the critical research that has been synthesized on the perspectives of both teachers and students and their attitudes to teaching and learning in an STS-themed learning environment. The first portion draws on the perspectives of elementary and secondary school teachers both locally and abroad.…

  2. Hypervideo for educational purposes : a literature review on a multifaceted technological tool

    NARCIS (Netherlands)

    Sauli, Florinda; Cattaneo, Alberto; van der Meij, Hans

    2018-01-01

    The term ‘hypervideo’ has different interpretations in the scientific literature. The aim of this contribution is to define hypervideo as it is and can be (more optimally) used for teaching and learning purposes. Videos can promote learning by recreating real experiences and dynamic processes,

  3. The Advisory Committee of International Nuclear Information System (INIS) for Japan

    International Nuclear Information System (INIS)

    Kunii, Katsuhiko; Itabashi, Keizo

    2016-10-01

    Under the International Atomic Energy Agency (IAEA), the International Nuclear Information System (INIS) Programme commenced in 1970 and ever since INIS has been acting as a database system available worldwide through information networks each time providing bibliographic information then full text documents of literature, technical reports, etc. on peaceful use of nuclear science and technology, thoroughly supported and maintained by INIS Secretariat in Vienna, on the other hand the inputs for INIS are provided by Member States and Organizations in their own boundaries. As for the INIS activity in Japan, while, the Japan Atomic Energy Research Institute (JAERI), then succeeded as the Japan Atomic Energy Agency (JAEA) as of today, the both have been responsible with the INIS activity in Japan as the INIS National Centre for Japan based on the request of the “former” Science and Technology Agency of the Japanese Government, an advisory committee had have a very important role for the INIS activity in Japan by enthusiastically advising the whole related to the activity from advanced and comprehensive viewpoints of expertise. This report describes about it, the Advisory Committee of International Nuclear Information System (INIS) for Japan, successfully been held 34 times from Oct. 1970 to Mar. 2005. Included are the history and its records, change of the member and topics of the Advisory Committee, and the minutes. (author)

  4. Does smart home technology prevent falls in community-dwelling older adults: a literature review

    Directory of Open Access Journals (Sweden)

    Eva Pietrzak

    2014-04-01

    Full Text Available Background: Falls in older Australians are an increasingly costly public health issue, driving the development of novel modes of intervention, especially those that rely on computer-driven technologies. Objective: The aim of this paper was to gain an understanding of the state of the art of research on smart homes and computer-based monitoring technologies to prevent and detect falls in the community-dwelling elderly. Method: Cochrane, Medline, Embase and Google databases were searched for articles on fall prevention in the elderly using pre-specified search terms. Additional papers were searched for in the reference lists of relevant reviews and by the process of ‘snowballing’. Only studies that investigated outcomes related to falling such as fall prevention and detection, change in participants’ fear of falling and attitudes towards monitoring technology were included. Results: Nine papers fulfilled the inclusion criteria. The following outcomes were observed: (1 older adults’ attitudes towards fall detectors and smart home technology are generally positive; (2 privacy concerns and intrusiveness of technology were perceived as less important to participants than their perception of health needs and (3 unfriendly and age-inappropriate design of the interface may be one of the deciding factors in not using the technology. Conclusion: So far, there is little evidence that using smart home technology may assist in fall prevention or detection, but there are some indications that it may increase older adults’ confidence and sense of security, thus possibly enabling aging in place.

  5. International cooperative research with Japan for the establishment of cooperation structure and technology for dynamic neutron radiography using HANARO

    International Nuclear Information System (INIS)

    Lim, I. C.; Sim, C. M.; Lee, B. H.; Choi, Y. S.; Baek, W. P.; Cha, J. E.; Yoon, B. J.; Chu, I. C.

    2007-07-01

    DNR is the technique to obtain radiography image continuously using a imaging system and Japan is the leading country in this field. Considering that no research has been performed to obtain quantitative parameters using DNR in Korea, it was necessary to establish a cooperative structure with Japanese experts and to develop the DNR technique throughout this project. The objectives of the project were to conduct 4 cooperative experiments using the HANARO BNCT facility and to establish a relationship with Japanese experts which makes it possible to maintain continuous communication. 4 experiments such as the void fraction and flow pattern measurement in a channel simulating HANARO fuel channel, observation of flow field in Pb/Bi field and the observation of cavity in a diesel engine nozzle were successfully completed. Also, the continuos communication and cooperation between the experts of two countries will be made. In this sense, this project is believed as a model project to use the mega research facility such as HANARO for the international cooperation

  6. Korea-Japan Joint Research on Development of Seismic Capacity Evaluation and Enhancement Technology Considering Near-Fault Effect

    Energy Technology Data Exchange (ETDEWEB)

    Choun, Young Sun; Choi, In Kil; Kim, Min Kyu [KAERI, Daejon (Korea, Republic of); Ohtori, Yasuki; Shiba, Yoshiaki; Nakajima, Masato [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    2005-12-15

    Several recent improved methods for the EGFM are introduced in order to avoid artificial holes seen in the synthetic acceleration spectrum. Furthermore evaluation of input ground motions at Wolsung NPP are performed by varying the source parameters that may control the high-frequency wave radiation and the deviation of the synthetic motions are revealed. The PSHA case studies for four NPP sites (Wolsung, Kori, Uljin, Younggwang) are performed. In the analysis, site-specific attenuation equations developed for Korean NPP sites are employed, and the seismic hazards for the target sites are evaluated in the case where the four kind of seismic source models are considered. Moreover, the PSHA for Wolsung and Younggwang are conducted by using the site-specific attenuation equation with the index of response spectra and the uniform hazard spectra are evaluated for the two sites. The supporting tool for seismic response analysis and the evaluation tool for evaluating annual probability of failure were integrated in the frame of the seismic risk assessment system. Then, the tools were applied to the seismic risk assessment of the conventional EDG and isolated EDG. General information such as earthquake parameters and regional distribution of seismic intensity is summarized on the 2005 West Off Fukuoka earthquake. Then, the observed strong motion records in Japan and Korea sites are compiled, and regional distribution of peak accelerations are represented. Moreover, the peak accelerations of the records are compared with the values estimated from the existing attenuation equations.

  7. Closing the Missing Links and Opening the Relationships among the Factors: A Literature Review on the Use of Clicker Technology Using the 3P Model

    Science.gov (United States)

    Han, Jae Hoon

    2014-01-01

    Clicker technology is one of the most widely adopted communication systems in college classroom environments. Previous literature reviews on clicker technology have identified and thoroughly documented the advantages, disadvantages, and implications of the use of this technology; the current review is intended to synthesize those earlier findings…

  8. Technology use for health education to caregivers: an integrative review of nursing literature.

    Science.gov (United States)

    Nogueira, Paula Cristina; de Carvalho Nagliate, Patrícia; de Godoy, Simone; Rangel, Elaine Maria Leite; Trevizan, Maria Auxiliadora; Mendes, Isabel Amélia Costa

    2013-08-01

    Providing caregivers with health education through educational technologies enhances safe care; and stimulates the decision process and communication among professionals, caregivers and patients. This article is an integrative review to identify what educational technologies have been used for health education to caregivers. The databases Web of Science, Bireme and Scopus were consulted. The inclusion criteria are as follows: full papers, published between 2001 and 2011, in English, Portuguese or Spanish. The descriptors used are the following: educational technology, health education and caregivers. Thirty-four papers were found, 27 of which were excluded because they did not comply with the inclusion criteria, resulting in a final sample of 7 papers. The results evidenced the use of light and hard technologies in health education for caregivers, aimed at the therapeutic discussion of care as well as telehealth service delivery. Research is needed which uses and assesses the use of hard educational technologies in health education for caregivers. Copyright © 2013 Elsevier Inc. All rights reserved.

  9. The determinants of medical technology adoption in different decisional systems: A systematic literature review.

    Science.gov (United States)

    Varabyova, Yauheniya; Blankart, Carl Rudolf; Greer, Ann Lennarson; Schreyögg, Jonas

    2017-03-01

    Studies of determinants of adoption of new medical technology have failed to coalesce into coherent knowledge. A flaw obscuring strong patterns may be a common habit of treating a wide range of health care innovations as a generic technology. We postulate three decisional systems that apply to different medical technologies with distinctive expertise, interest, and authority: medical-individualistic, fiscal-managerial, and strategic-institutional decisional systems. This review aims to examine the determinants of the adoption of medical technologies based on the corresponding decision-making system. We included quantitative and qualitative studies that analyzed factors facilitating or inhibiting the adoption of medical technologies. In total, 65 studies published between 1974 and 2014 met our inclusion criteria. These studies contained 688 occurrences of variables that were used to examine the adoption decisions, and we subsequently condensed these variables to 62 determinants in four main categories: organizational, individual, environmental, and innovation-related. The determinants and their empirical association with adoption were grouped and analyzed by the three decision-making systems. Although we did not identify substantial differences across the decision-making systems in terms of the direction of the determinants' influence on adoption, a clear pattern emerged in terms of the categories of determinants that were targeted in different decision-making systems. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Can commonly-used fan-driven air cleaning technologies improve indoor air quality? A literature review

    DEFF Research Database (Denmark)

    Zhang, Yinping; Mo, Jinhan; Li, Yuguo

    2011-01-01

    America, and Asia with expertise in air cleaning, aerosol science, medicine, chemistry and ventilation. The effects on health were not examined. Over 26,000 articles were identified in major literature databases; 400 were selected as being relevant based on their titles and abstracts by the first two......Air cleaning techniques have been applied worldwide with the goal of improving indoor air quality. The effectiveness of applying these techniques varies widely, and pollutant removal efficiency is usually determined in controlled laboratory environments which may not be realized in practice. Some...... air cleaners are largely ineffective, and some produce harmful by-products. To summarize what is known regarding the effectiveness of fan-driven air cleaning technologies, a state-of-the-art review of the scientific literature was undertaken by a multidisciplinary panel of experts from Europe, North...

  11. Review of literature on the TMI accident and correlation to the LWR Safety Technology Program

    Energy Technology Data Exchange (ETDEWEB)

    Miller, W.J.

    1980-05-01

    This report is the result of approximately two man-months of effort devoted to assimilating and comprehending significant publicly available material related to Three Mile Island Unit 2 and events during and subsequent to the accident experienced on March 28, 1979. Those events were then correlated with the Preliminary LWR Safety Technology Program Plan (Preliminary Program Plan) prepared for the US Department of Energy by Sandia National Lab. This report is being submitted simultaneously with the SAI report entitled Preliminary Prioritization of Tasks in the Draft LWR Safety Technology Program Plan.

  12. Review of literature on the TMI accident and correlation to the LWR Safety Technology Program

    International Nuclear Information System (INIS)

    Miller, W.J.

    1980-05-01

    This report is the result of approximately two man-months of effort devoted to assimilating and comprehending significant publicly available material related to Three Mile Island Unit 2 and events during and subsequent to the accident experienced on March 28, 1979. Those events were then correlated with the Preliminary LWR Safety Technology Program Plan (Preliminary Program Plan) prepared for the US Department of Energy by Sandia National Lab. This report is being submitted simultaneously with the SAI report entitled Preliminary Prioritization of Tasks in the Draft LWR Safety Technology Program Plan

  13. Japan and the global environment

    International Nuclear Information System (INIS)

    Miller, A.S.; Moore, C.

    1993-01-01

    In many areas, the word most often used to describe Japanese policy is open-quotes enigma.close quotes In some ways, Japan's record on environmental policy also has elements of mystery and contradiction. On the one hand, Japan's history and culture often are associated with a reverence for nature. Indeed, Japan does lead the world in certain environmental areas, such as reduction of conventional air pollutants and compensation of air pollution victims. On the other hand, Japan has been widely criticized for its poor record in preserving its domestic environment, contribution to tropical deforestation, and unwillingness to protect endangered species. Today, the international community clamors for Japan to take its share of responsibility, as an economic superpower, for the global environment. To secure its place in world affairs, Japan slowly has begun to respond to this pressure on issues ranging from ivory importation to reduction of CFC emissions. There is some hope that the government's particular willingness to address global warming may be a sign of significant changes to come in Japanese environmental policy. However, international pressure remains on the many environmental issues Japan has yet to resolve, including tropical deforestation and financing of Third World development projects that harm the environment. Japan's environmental policy is most effective when government and industry cooperate to find technical solutions to environmental problems. Although in recent years Japan's energy consumption has risen sharply, the Japanese have developed numerous technologies to reduce pollution and increase economic growth by improving energy efficiency. It is in these technologies that Japan has made the greatest strides and has the most to offer the global environment

  14. Japan 2014

    DEFF Research Database (Denmark)

    Selmer, Finn

    2014-01-01

    In March 2014 a group of teachers and students from the Royal Danish Academy of Fine Arts Schools of Architecture, Design and Conservation, School of Architecture, Study Dept. 3 went on a study trip to Japan. This publication collects observations and reflections that the participants of the trip...

  15. Knowledge flows : analyzing the core literature of innovation, entrepreneurship and science and technology studies

    NARCIS (Netherlands)

    Bhupatiraju, S.; Nomaler, Z.O.; Triulzi, G.; Verspagen, B.

    2012-01-01

    This paper applies network analysis to a citation database that combines the key references in the fields of Entrepreneurship (ENT), Innovation Studies (INN) and Science and Technology Studies (STS). We find that citations between the three fields are relatively scarce, as compared to citations

  16. Three-Dimensional Display Technologies for Anatomical Education: A Literature Review

    Science.gov (United States)

    Hackett, Matthew; Proctor, Michael

    2016-01-01

    Anatomy is a foundational component of biological sciences and medical education and is important for a variety of clinical tasks. To augment current curriculum and improve students' spatial knowledge of anatomy, many educators, anatomists, and researchers use three-dimensional (3D) visualization technologies. This article reviews 3D display…

  17. The use of advanced medical technologies at home : a systematic review of the literature

    NARCIS (Netherlands)

    Haken, ten I. (Ingrid); Ben Allouch, S. (Somaya); Harten, van W.H. (Wim)

    2018-01-01

    https://doi.org/10.1186/s12889-018-5123-4 Background: The number of medical technologies used in home settings has increased substantially over the last 10–15 years. In order to manage their use and to guarantee quality and safety, data on usage trends and practical experiences are important.

  18. Multicultural Media Authorship: Using Technology to Create Children's Literature Texts

    Science.gov (United States)

    Byker, Erik Jon; Good, Amy J.; Miller, Erin; Kissel, Brian

    2018-01-01

    The purpose of this article is to describe and report on how a group of teacher candidates used technology to create multicultural texts which integrated literacy and social studies. To meet this purpose, the authors briefly describe the objectives of the assignment, examine 41 teacher candidates' perceptions of the assignment, and discuss media…

  19. Possible applications of crown-ethers to metal extraction using liquid membrane technology - a literature survey

    International Nuclear Information System (INIS)

    Dozol, M.

    1990-01-01

    Ether-crowns, discovered in 1967 by J.C. PEDERSEN, exhibit attractive complexive and extractive properties, enhanced in various fields, such as analytical chemistry, chemical synthesis, field of biology, or extractive chemistry. The investigations carried out on these macrocyclic compounds are continually increasing, as show in international literature. Among the focus of interest, the applications to metal extraction are extensively studied with crown compounds present in liquid phase or impregnated on supports (membranes or resins). The goal of this paper is to describe the application of crown-ethers to metal extraction, using liquid membrane processes. 69 refs

  20. Rising economy of China and its effects on the industrial technology of Japan and other Asian countries. Chugoku no hatten to henbosuru Asia no sangyo gijutsu chizu (henkaku wo semarareru seisan gijutsu taikoku Nippon)

    Energy Technology Data Exchange (ETDEWEB)

    Otani, H [JGC Corp., Tokyo (Japan)

    1994-03-05

    Due to the rapid economy growth and industry development in China, the map of industry and economy in Asian countries has been greatly changing. The technology, which has supported Japan's industrial development, is characterized by the improvements of original technologies introduced from Europe and the United States. On the other hand, Korea has problems of creating the original and individual production technology and its basis. The industrial technology in China at present has problems which are accompanied with the conversion from the planned economy system to the market economy system. However, Chinese people having a tradition of 'link of three parts' seem to understand the Japanese style management policy well. Japan has played a role as 'world's center of manufacturing' by using its excellent production technology. In the future, China is considered to play a role as the 'world's center of manufacturing,' due to its huge domestic market, cheap and rich manpower, and excellent potential capacity of industrial technology. In Japan, it is emphasized that an industrial society system should be reconstructed, in which excellent individuality and talent can be made good use of. 6 refs., 1 fig.

  1. Japan-Australia co-operative program on research and development of technology for the management of high level radioactive wastes. Final report 1985 to 1998

    Energy Technology Data Exchange (ETDEWEB)

    Hart, K.; Vance, E.; Lumpkin, G. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia); Mitamura, H.; Banba, T. [Japan Atomic Energy Research Inst. Tokai, Ibaraki (Japan)

    1998-12-01

    The overall aim of the Co-operative Program has been to promote the exchange of information on technology for the management of High-Level Wastes (HLW) and to encourage research and development relevant to such technology. During the 13 years that the Program has been carried out, HLW management strategies have matured and developed internationally, and Japan has commenced construction of a domestic reprocessing and vitrification facility for HLW. The HLW management strategy preferred is a national decision. Many countries are using vitrification, direct disposal of spent fuel or a combination of both to handle their existing wastes whereas others have deferred the decision. The work carried out in the Co-operative Program provides strong scientific evidence that the durability of ceramic waste forms is not significantly affected by radiation damage and that high loadings of actinide elements can be incorporated into specially designed ceramic waste forms. Moreover, natural minerals have been shown to remain as closed systems for U and Th for up to 2.5 b y. All of these results give confidence in the ability of second generation waste forms, such as Synroc, to handle future waste arisings that may not be suitable for vitrification 87 refs., 15 tabs., 22 figs.

  2. Current Requirements of the Society to the Professional Training of Specialists in Information Technology Industry in Japan

    Science.gov (United States)

    Pododimenko, Inna

    2014-01-01

    The problem of professional training of skilled human personnel in the industry of information communication technology, the urgency of which is recognized at the state level of Ukraine and the world, has been considered. It has been traced that constantly growing requirements of the labour market, swift scientific progress require the use of…

  3. Japan Accelerator Conference

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    At the international level, the high energy accelerator scene evolves rapidly and the International Conference on High Energy Accelerators is where its strong pulse can best be felt. This year, the Conference was held for the first time in Japan, with the 14th meeting in the series having been hosted in August by the Japanese KEK National Laboratory for High Energy Physics, Tsukuba. The venue was a recognition of the premier accelerator physics and technology status achieved by this diligent nation

  4. Japan Accelerator Conference

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1989-11-15

    At the international level, the high energy accelerator scene evolves rapidly and the International Conference on High Energy Accelerators is where its strong pulse can best be felt. This year, the Conference was held for the first time in Japan, with the 14th meeting in the series having been hosted in August by the Japanese KEK National Laboratory for High Energy Physics, Tsukuba. The venue was a recognition of the premier accelerator physics and technology status achieved by this diligent nation.

  5. Mobile technologies and geographic information systems to improve health care systems: a literature review.

    Science.gov (United States)

    Nhavoto, José António; Grönlund, Ake

    2014-05-08

    A growing body of research has employed mobile technologies and geographic information systems (GIS) for enhancing health care and health information systems, but there is yet a lack of studies of how these two types of systems are integrated together into the information infrastructure of an organization so as to provide a basis for data analysis and decision support. Integration of data and technical systems across the organization is necessary for efficient large-scale implementation. The aim of this paper is to identify how mobile technologies and GIS applications have been used, independently as well as in combination, for improving health care. The electronic databases PubMed, BioMed Central, Wiley Online Library, Scopus, Science Direct, and Web of Science were searched to retrieve English language articles published in international academic journals after 2005. Only articles addressing the use of mobile or GIS technologies and that met a prespecified keyword strategy were selected for review. A total of 271 articles were selected, among which 220 concerned mobile technologies and 51 GIS. Most articles concern developed countries (198/271, 73.1%), and in particular the United States (81/271, 29.9%), United Kingdom (31/271, 11.4%), and Canada (14/271, 5.2%). Applications of mobile technologies can be categorized by six themes: treatment and disease management, data collection and disease surveillance, health support systems, health promotion and disease prevention, communication between patients and health care providers or among providers, and medical education. GIS applications can be categorized by four themes: disease surveillance, health support systems, health promotion and disease prevention, and communication to or between health care providers. Mobile applications typically focus on using text messaging (short message service, SMS) for communication between patients and health care providers, most prominently reminders and advice to patients. These

  6. A Literature Review on Operator Interface Technologies for Network Enabled Operational Environments Using Complex System Analysis

    Science.gov (United States)

    2009-05-30

    d’interface fondées sur le comportement et sur la psychologie , ainsi que des méthodes de conception et de mise en œuvre d’interfaces multi-agents. On a mis...réseaucentriques. Ces technologies comprennent des approches de conception d’interface fondées sur le comportement et sur la psychologie , ainsi que des

  7. Designing Patient-facing Health Information Technologies for the Outpatient Settings: A Literature Review

    OpenAIRE

    Yushi Yang; Onur Asan

    2016-01-01

    Introduction: The implementation of health information technologies (HITs) has changed the dynamics of doctor–patient communication in outpatient settings. Designing patient-facing HITs provides patients with easy access to healthcare information during the visit and has the potential to enhance the patient-centred care.   Objectives: The objectives of this study are to systematically review how the designs of patient-facing HITs have been suggested and evaluated, and how they may pot...

  8. Technology-Facilitated Sexual Violence: A Literature Review of Empirical Research.

    Science.gov (United States)

    Henry, Nicola; Powell, Anastasia

    2018-04-01

    Technology-facilitated sexual violence (TFSV) refers to a range of behaviors where digital technologies are used to facilitate both virtual and face-to-face sexually based harms. Such behaviors include online sexual harassment, gender- and sexuality-based harassment, cyberstalking, image-based sexual exploitation, and the use of a carriage service to coerce a victim into an unwanted sexual act. This article reviews the current state of knowledge on these different dimensions, drawing on existing empirical studies. While there is a growing body of research into technology-facilitated harms perpetrated against children and adolescents, there is a dearth of qualitative and quantitative research on TFSV against adults. Moreover, few of the existing studies provide reliable data on the nature, scope, and impacts of TFSV. Preliminary studies, however, indicate that some harms, much like sexual violence more broadly, may be predominantly gender-, sexuality-, and age-based, with young women being overrepresented as victims in some categories. This review collects the empirical evidence to date regarding the prevalence and gender-based nature of TFSV against adults and discusses the implications for policy and programs, as well as suggestions for future research.

  9. TECHNOLOGY, LITERATURE AND MEDIA FOR TOURIST CARE OF ILHÉUS

    Directory of Open Access Journals (Sweden)

    Aline Santos de Brito Nascimento

    2006-11-01

    Full Text Available After the industries, the information plays an important role in our society. Media and society coexist influencing the consumers’ choices. The regional literature, which is known world-wide, is also an important element of spreading of the local culture. The tourism, on the other hand, is one of the branches of the economy whose factors receive more benefits, because it makes people know varied and faraway places. The cultural manifestations which are part of the people’s everyday lives have several things that influence in tourism, as an activity, and should be observed, trying to keep its sustainability. In order to develop the strategies and provide the sustainable development in a satisfactory way, it is necessary that all those who are interested in the subject, be sure the hierarchy is respected and the economical and social interests be united for the local tourist activity.

  10. Technology development in the U.S. and Japan: the case of the phase-shifting mask

    Science.gov (United States)

    Schellenberg, Frank; Okimoto, Dan; Raphael, Jim; Shirouzu, Norihiko

    1994-01-01

    The status of American competitiveness in high technology, and in particular the semiconductor industry, has been the subject of concern for some time now.1 With the rise of Japanese manufactures to preeminence in the manufacturing of DRAM (Dynamic Random Access Memory) chips during the 1980's, the fundamental assumptions of modern economic theory have been called into question.2 Various factors have been cited by various authors to account for the recent rise in Japanese competitiveness, including industrial policies of the Japanese government, differences in the cost of capital, investments in research and development, and the requirement of American companies to post financial results quarterly.3 There is, however, a real need for concrete case studies, which can examine the actual history of a technology and establish mechanisms of cause and effect.

  11. Digital health technology for use in patients with serious mental illness: a systematic review of the literature.

    Science.gov (United States)

    Batra, Sonal; Baker, Ross A; Wang, Tao; Forma, Felicia; DiBiasi, Faith; Peters-Strickland, Timothy

    2017-01-01

    As the capabilities and reach of technology have expanded, there is an accompanying proliferation of digital technologies developed for use in the care of patients with mental illness. The objective of this review was to systematically search published literature to identify currently available health technologies and their intended uses for patients with serious mental illness. The Medline, Embase, and BIOSIS Previews electronic databases were searched to identify peer-reviewed English language articles that reported the use of digital, mobile, and other advanced technology in patients with schizophrenia/schizoaffective disorder, bipolar disorder, and major depressive disorder. Eligible studies were systematically reviewed based on Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Eighteen studies that met the inclusion criteria were identified. Digital health technologies (DHTs) assessed in the selected studies included mobile applications (apps), digital medicine, digital personal health records, and an electronic pill container. Smartphone apps accounted for the largest share of DHTs. The intended uses of DHTs could be broadly classified as monitoring to gain a better understanding of illness, clinical assessment, and intervention. Overall, studies indicated high usability/feasibility and efficacy/effectiveness, with several reporting validity against established clinical scales. Users were generally engaged with the DHT, and mobile assessments were deemed helpful in monitoring disease symptoms. Rapidly proliferating digital technologies seem to be feasible for short-term use in patients with serious mental illness; nevertheless, long-term effectiveness data from naturalistic studies will help demonstrate their usefulness and facilitate their adoption and integration into the mental health-care system.

  12. Liquid hydrogen in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Yasumi, S. [Iwatani Corp., Osaka (Japan). Dept. of Overseas Business Development

    2009-07-01

    Japan's Iwatani Corporation has focused its attention on hydrogen as the ultimate energy source in future. Unlike the United States, hydrogen use and delivery in liquid form is extremely limited in the European Union and in Japan. Iwatani Corporation broke through industry stereotypes by creating and building Hydro Edge Co. Ltd., Japan's largest liquid hydrogen plant. It was established in 2006 as a joint venture between Iwatani and Kansai Electric Power Group in Osaka. Hydro Edge is Japan's first combined liquid hydrogen and ASU plant, and is fully operational. Liquid oxygen, liquid nitrogen and liquid argon are separated from air using the cryogenic energy of liquefied natural gas fuel that is used for power generation. Liquid hydrogen is produced efficiently and simultaneously using liquid nitrogen. Approximately 12 times as much hydrogen in liquid form can be transported and supplied as pressurized hydrogen gas. This technology is a significant step forward in the dissemination and expansion of hydrogen in a hydrogen-based economy.

  13. Costs and benefits of health information technology: new trends from the literature.

    Science.gov (United States)

    Goldzweig, Caroline Lubick; Towfigh, Ali; Maglione, Margaret; Shekelle, Paul G

    2009-01-01

    To understand what is new in health information technology (IT), we updated a systematic review of health IT with studies published during 2004-2007. From 4,683 titles, 179 met inclusion criteria. We identified a proliferation of patient-focused applications although little formal evaluation in this area; more descriptions of commercial electronic health records (EHRs) and health IT systems designed to run independently from EHRs; and proportionately fewer relevant studies from the health IT leaders. Accelerating the adoption of health IT will require greater public-private partnerships, new policies to address the misalignment of financial incentives, and a more robust evidence base regarding IT implementation.

  14. Effect of scale and quantity on the cost and performance of energy technologies: a literature review

    International Nuclear Information System (INIS)

    Hill, D.

    1983-11-01

    Traditionally, a six-tenths power law stated that cost increased by only half with a doubling of plant size, reducing cost per unit of capacity to 75%. Problems during construction in the past two decades have largely nullified the expected savings. Thermal efficiency improves with size in both coal and nuclear plants, but plant availability declines. These trends suggest that an optimal size for nuclear plants may be somewhat less than 1000 MW(e). Judged by a study of the cost of electricity generated during the 1970s, however, operational savings substantially restored economies of scale to nuclear plants but not to coal plants. The alternative to building larger plants is to build more small plants. In field construction, a second plant at the same site costs about 90% of the first, and a doubling of the number of plants built by an architect-engineer appears to reduce average cost to about 93%. In a variety of manufacturing industries, the learning curve is steeper. In the few cases where learning curves are mentioned in manufacturing studies of new energy technologies, however, a reduction in cost to only about 90% with a doubling of quantity is assumed. Most of the cost of new energy technologies such as photovoltaic arrays and fuel cells will be due to conventional equipment, structure, and manufacturing methods. It should therefore be possible to estimate size-quantity cost tradeoffs with some confidence to help establish optimal plant or module sizes

  15. Exergame technology and interactive interventions for elderly fall prevention: A systematic literature review.

    Science.gov (United States)

    Choi, Sang D; Guo, Liangjie; Kang, Donghun; Xiong, Shuping

    2017-11-01

    Training balance and promoting physical activities in the elderly can contribute to fall-prevention. Due to the low adherence of conventional physical therapy, fall interventions through exergame technologies are emerging. The purpose of this review study is to synthesize the available research reported on exergame technology and interactive interventions for fall prevention in the older population. Twenty-five relevant papers retrieved from five major databases were critically reviewed and analyzed. Results showed that the most common exergaming device for fall intervention was Nintendo Wii, followed by Xbox Kinect. Even though the exergame intervention protocols and outcome measures for assessing intervention effectiveness varied, the accumulated evidences revealed that exergame interventions improved physical or cognitive functions in the elderly. However, it remains inconclusive whether or not the exergame-based intervention for the elderly fall prevention is superior to conventional physical therapy and the effect mechanism of the exergaming on elderly's balance ability is still unclear. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Literature review of voice recognition and generation technology for Army helicopter applications

    Science.gov (United States)

    Christ, K. A.

    1984-08-01

    This report is a literature review on the topics of voice recognition and generation. Areas covered are: manual versus vocal data input, vocabulary, stress and workload, noise, protective masks, feedback, and voice warning systems. Results of the studies presented in this report indicate that voice data entry has less of an impact on a pilot's flight performance, during low-level flying and other difficult missions, than manual data entry. However, the stress resulting from such missions may cause the pilot's voice to change, reducing the recognition accuracy of the system. The noise present in helicopter cockpits also causes the recognition accuracy to decrease. Noise-cancelling devices are being developed and improved upon to increase the recognition performance in noisy environments. Future research in the fields of voice recognition and generation should be conducted in the areas of stress and workload, vocabulary, and the types of voice generation best suited for the helicopter cockpit. Also, specific tasks should be studied to determine whether voice recognition and generation can be effectively applied.

  17. Development on power distribution technologies of four electric power companies in Japan. The Tokyo Electric Power Co. , Inc

    Energy Technology Data Exchange (ETDEWEB)

    1989-07-01

    Electric power companies have been needed to cope with various needs in accordance with the progress of highly information-oriented society, the improvement of industrial technology, and the advancement and diversification of the living environment. In such situation, the power distribution section of Tokyo Electric Power has promoted technical development, setting up following priority items to put into operation: to reduce power failure caused by works and accidents, to improve reliability in supply, to reduce costs of construction and all over business management, to serve customers to answer various needs, to develop new technology and new methods based on the medium- and long-term prospect, and so forth. Several examples of recent technical development are introduced here. They are as follows; compact equipment and materials for electric poles to match the circumstances of cities and to simplify the construction method for power distribution, a 750kVA large high-voltage power-generation truck to make provision against an emergency such as a disaster by a typhoon, a compact transformer used on the ground, a high-voltage automatic cabinet, and a detector to find the failure of indoor power distribution works in resistances in a short time. 8 figs.

  18. Global mining risk footprint of critical metals necessary for low-carbon technologies: the case of neodymium, cobalt, and platinum in Japan.

    Science.gov (United States)

    Nansai, Keisuke; Nakajima, Kenichi; Kagawa, Shigemi; Kondo, Yasushi; Shigetomi, Yosuke; Suh, Sangwon

    2015-02-17

    Meeting the 2-degree global warming target requires wide adoption of low-carbon energy technologies. Many such technologies rely on the use of precious metals, however, increasing the dependence of national economies on these resources. Among such metals, those with supply security concerns are referred to as critical metals. Using the Policy Potential Index developed by the Fraser Institute, this study developed a new footprint indicator, the mining risk footprint (MRF), to quantify the mining risk directly and indirectly affecting a national economy through its consumption of critical metals. We formulated the MRF as a product of the material footprint (MF) of the consuming country and the mining risks of the countries where the materials are mined. A case study was conducted for the 2005 Japanese economy to determine the MF and MRF for three critical metals essential for emerging energy technologies: neodymium, cobalt and platinum. The results indicate that in 2005 the MFs generated by Japanese domestic final demand, that is, the consumption-based metal output of Japan, were 1.0 × 10(3) t for neodymium, 9.4 × 10(3) t for cobalt, and 2.1 × 10 t for platinum. Export demand contributes most to the MF, accounting for 3.0 × 10(3) t, 1.3 × 10(5) t, and 3.1 × 10 t, respectively. The MRFs of Japanese total final demand (domestic plus export) were calculated to be 1.7 × 10 points for neodymium, 4.5 × 10(-2) points for cobalt, and 5.6 points for platinum, implying that the Japanese economy is incurring a high mining risk through its use of neodymium. This country's MRFs are all dominated by export demand. The paper concludes by discussing the policy implications and future research directions for measuring the MFs and MRFs of critical metals. For countries poorly endowed with mineral resources, adopting low-carbon energy technologies may imply a shifting of risk from carbon resources to other natural resources, in particular critical metals, and a trade

  19. Rapid Prototyping Technologies and their Applications in Prosthodontics, a Review of Literature.

    Science.gov (United States)

    Torabi, Kianoosh; Farjood, Ehsan; Hamedani, Shahram

    2015-03-01

    The early computer-aided design/computer-aided manufacturing (CAD/CAM) systems were relied exclusively on subtractive methods. In recent years, additive methods by employing rapid prototyping (RP) have progressed rapidly in various fields of dentistry as they have the potential to overcome known drawbacks of subtractive techniques such as fit problems. RP techniques have been exploited to build complex 3D models in medicine since the 1990s. RP has recently proposed successful applications in various dental fields, such as fabrication of implant surgical guides, frameworks for fixed and removable partial dentures, wax patterns for the dental prosthesis, zirconia prosthesis and molds for metal castings, and maxillofacial prosthesis and finally, complete dentures. This paper aimed to offer a comprehensive literature review of various RP methods, particularly in dentistry, that are expected to bring many improvements to the field. A search was made through MEDLINE database and Google scholar search engine. The keywords; 'rapid prototyping' and 'dentistry' were searched in title/abstract of publications; limited to 2003 to 2013, concerning past decade. The inclusion criterion was the technical researches that predominately included laboratory procedures. The exclusion criterion was meticulous clinical and excessive technical procedures. A total of 106 articles were retrieved, recited by authors and only 50 met the specified inclusion criteria for this review. Selected articles had used rapid prototyping techniques in various fields in dentistry through different techniques. This review depicted the different laboratory procedures employed in this method and confirmed that RP technique have been substantially feasible in dentistry. With advancement in various RP systems, it is possible to benefit from this technique in different dental practices, particularly in implementing dental prostheses for different applications.

  20. Rapid Prototyping Technologies and their Applications in Prosthodontics, a Review of Literature

    Science.gov (United States)

    Torabi, Kianoosh; Farjood, Ehsan; Hamedani, Shahram

    2015-01-01

    The early computer-aided design/computer-aided manufacturing (CAD/CAM) systems were relied exclusively on subtractive methods. In recent years, additive methods by employing rapid prototyping (RP) have progressed rapidly in various fields of dentistry as they have the potential to overcome known drawbacks of subtractive techniques such as fit problems. RP techniques have been exploited to build complex 3D models in medicine since the 1990s. RP has recently proposed successful applications in various dental fields, such as fabrication of implant surgical guides, frameworks for fixed and removable partial dentures, wax patterns for the dental prosthesis, zirconia prosthesis and molds for metal castings, and maxillofacial prosthesis and finally, complete dentures. This paper aimed to offer a comprehensive literature review of various RP methods, particularly in dentistry, that are expected to bring many improvements to the field. A search was made through MEDLINE database and Google scholar search engine. The keywords; ‘rapid prototyping’ and ‘dentistry’ were searched in title/abstract of publications; limited to 2003 to 2013, concerning past decade. The inclusion criterion was the technical researches that predominately included laboratory procedures. The exclusion criterion was meticulous clinical and excessive technical procedures. A total of 106 articles were retrieved, recited by authors and only 50 met the specified inclusion criteria for this review. Selected articles had used rapid prototyping techniques in various fields in dentistry through different techniques. This review depicted the different laboratory procedures employed in this method and confirmed that RP technique have been substantially feasible in dentistry. With advancement in various RP systems, it is possible to benefit from this technique in different dental practices, particularly in implementing dental prostheses for different applications. PMID:25759851

  1. Present status of R and D for radioactive waste disposal and expectations for civil engineering in advances of their technology in Japan

    International Nuclear Information System (INIS)

    Kawanishi, Motoi; Onishi, Yuzo; Yui, Mikazu

    2005-01-01

    About high-level radioactive waste disposal, the general invitation in a voluntary approach for selection of ''preliminary investigation areas'' which is the 1 st step of the stepwise site selection by Nuclear Waste Management Organization of Japan is started. On the other hand, about low-level radioactive waste disposal, several kinds of investigation for the burial disposal approach of the underground tunnel facility system in about 50-100 m depth below ground surface have been performed for disposing of high βγ radioactive wastes. For carrying forward each disposal project of these radioactive wastes, the integration of the state-of-the-art technology in an interdisciplinary broad research field is indispensable. Especially the role that civil engineering can play in fields, such as investigation, design, development of new materials and performance assessment for underground disposal facility is very large. In this paper, the role and expectation of civil engineering, and the latest trend in the disposal techniques to need an argument to the order of very-long term of longer than 1,000 to 10,000 years which civil engineering have not experienced until now, are described. (author)

  2. New decision-making processes for the pricing of health technologies in Japan: The FY 2016/2017 pilot phase for the introduction of economic evaluations.

    Science.gov (United States)

    Shiroiwa, Takeru; Fukuda, Takashi; Ikeda, Shunya; Takura, Tomoyuki

    2017-08-01

    Economic evaluation is used for decision-making processes in healthcare technologies in many developed countries. In Japan, no health economic data have been requested for drugs, medical devices, and interventions till date. However, economic evaluation is gradually gaining importance, and a trial implementation of the cost-effectiveness evaluation of drugs and medical devices has begun. Discussions on economic evaluation began in May 2012 within a newly established sub-committee of the Chuikyo, referred to as the "Special Committee on Cost Effectiveness." After four years of discussions, this committee determined that during the trial implementation, the results of the cost-effectiveness evaluation would be used for the re-pricing of drugs and medical devices at the end of fiscal year (FY) 2017. Chuikyo selected 13 products (7 drugs and 6 medical devices) as targets for this evaluation. These products will be evaluated until the end of FY 2017 based on the following process: manufacturers will submit the data of economic evaluation; the National Institute of Public Health will coordinate the review process; academic groups will perform the actual review of the submitted data, and the expert committee will appraise these data. This represents the first step to introducing cost-effectiveness analysis in the Japanese healthcare system. We believe that these efforts will contribute to the efficiency and sustainability of the Japanese healthcare system. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

  3. The role of technology, product lifetime, and energy efficiency in climate mitigation: A case study of air conditioners in Japan

    International Nuclear Information System (INIS)

    Nishijima, Daisuke

    2017-01-01

    This study analyzed the impact on the life-cycle CO_2 emissions derived from a specific durable good (i.e., household air conditioners in this study) of industrial technology changes, product lifetime changes, and energy efficiency improvements. I proposed a comprehensive structural decomposition analysis including two factors of average lifetime and energy efficiency trend of household air conditioners and applied the decomposition method to the Japanese environmental input-output tables of 1990, 1995, 2000, and 2005. The empirical results show that “Household air-conditioner sector” itself contributed to reducing life-cycle CO_2 emissions derived from household air conditioners, while other sectors such as “On-site power generation sector” and “Retail trade sector” contributed to increasing life-cycle CO_2 emissions derived from household air conditioners. I also conducted combined scenario analysis about reduction potential of product lifetime and energy efficiency of air conditioners and the results showed the reduction rate of energy efficiency necessary for maintain CO_2 emissions in 2005 at 1990 level on each average lifetime scenario. (e.g. if average lifetime of air conditioners is shortened by 1 year, energy efficiency of air conditioners have to be further improved by 20.6% from current level. - Highlights: • This study provides a decomposition framework for air conditioner’s CO_2 emissions. • Technology, product lifetime and energy efficiency are considered in the framework. • “Household air conditioner” sector contributed to reducing CO_2 emissions largely. • “On-site power generation” indirectly contributed to increasing CO_2 emissions. • I showed the improvement rates of energy efficiency to achieve a reduction target.

  4. Cigarette smoking impairs clinical outcomes of assisted reproduction technologies: a meta-analysis of the literature.

    Science.gov (United States)

    Budani, Maria Cristina; Fensore, Stefania; Di Marzio, Marco; Tiboni, Gian Mario

    2018-06-12

    There is convincing evidence that cigarette smoking can impair female reproductive potential. This meta-analysis updates the knowledge regarding the effects of cigarette smoking on clinical outcomes of assisted reproductive technologies (ART). Twenty-six studies were included in this meta-analysis. Results were expressed as odds ratios (OR) with 95% confidence intervals (CI) and statistical heterogeneity between the studies was evaluated with Higgins (I 2 ), Breslow (τ 2 ), Birge's ratio (H 2 ) indices and Chi-square test (χ 2 ). A P-value < 0.05 was considered statistically significant. The analysis showed a significant decrease in live birth rate per cycle for smoking patients (OR 0.59, 95% CI 0.44-0.79; P = 0.0005), a significant lower clinical pregnancy rate per cycle for smoking women (OR 0.53, 95% CI 0.41-0.68; P < 0.0001), and a significant increase in terms of spontaneous miscarriage rate (OR 2.22, 95% CI 1.10-4.48; P = 0.025) for smokers. These findings demonstrate clear negative effects of cigarette smoking on the outcome of ART programs. Copyright © 2018 Elsevier Inc. All rights reserved.

  5. Literature in focus - The Large Hadron Collider: A Marvel of Technology

    CERN Document Server

    Cecile Noels

    Inside an insulating vacuum chamber in a tunnel about 100 metres below the surface of the Franco-Swiss plain near Geneva, packets of protons whirl around the 27-km circumference of the Large Hadron Collider (LHC) at a speed close to that of light, colliding every 25 nanoseconds at four beam crossing points. The products of these collisions, of which hundreds of billions will be produced each second, are observed and measured with the most advanced particle-detection technology, capable of tracking individual particles as they generate a signature track during their passage through the detectors. All this information is captured, filtered and piped to huge networks of microprocessors for analysis and study by an international team of physicists. When the Large Hadron Collider (LHC) comes on line in 2009, it will be the largest scientific experiment ever constructed, and the data it produces will lead to a new understanding of our Universe. Many thousands of scientists and engineers were behind the planning...

  6. Literature in focus - The Large Hadron Collider: A Marvel of Technology

    CERN Document Server

    Cecile Noels

    2009-01-01

    Inside an insulating vacuum chamber in a tunnel about 100 metres below the surface of the Franco-Swiss plain near Geneva, packets of protons whirl around the 27-km circumference of the Large Hadron Collider (LHC) at a speed close to that of light, colliding every 25 nanoseconds at four beam crossing points. The products of these collisions, of which hundreds of billions will be produced each second, are observed and measured with the most advanced particle-detection technology, capable of tracking individual particles as they generate a signature track during their passage through the detectors. All this information is captured, filtered and piped to huge networks of microprocessors for analysis and study by an international team of physicists. When the Large Hadron Collider (LHC) comes on line in 2009, it will be the largest scientific experiment ever constructed, and the data it produces will lead to a new understanding of our Universe. Many thousands of scientists and engineers were behind the planning...

  7. Diagnostics vehicle’s condition using obd-ii and raspberry pi technology: study literature

    Science.gov (United States)

    Moniaga, J. V.; Manalu, S. R.; Hadipurnawan, D. A.; Sahidi, F.

    2018-03-01

    Transportation accident rate are still being a major challenge in many countries. There are many factors that could be cause transportation accident, especially in vehicle’s internal system problem. To overcome this problem, OBD-II technology has been created to diagnostics vehicle’s condition. OBD-II scanner plugged to OBD-II port or usually called Data Link Connector (DLC), and after that it sends the diagnostics to Raspberry Pi. Compared from another microcontrollers, Arduino, Raspberry Pi are chosen because it sustains the application to receive real-time diagnostics, process the diagnostics and send command to automobiles at the same time, rather than Arduino that must wait for another process finished to run another process. Outcome from this application is to enable automobile’s user to diagnostics their own vehicles. If there is found something unusual or a problem, the application can told the problem to user, so they could know what to fix before they use their vehicle safely.

  8. Digital health technology for use in patients with serious mental illness: a systematic review of the literature

    Directory of Open Access Journals (Sweden)

    Batra S

    2017-10-01

    Full Text Available Sonal Batra,1 Ross A Baker,2 Tao Wang,3 Felicia Forma,4 Faith DiBiasi,3 Timothy Peters-Strickland5 1Department of Psychiatry, Rutgers Robert Wood Johnson Medical School, Piscataway, 2Global Medical Affairs, Otsuka Pharmaceutical Development and Commercialization Inc., Princeton, NJ, 3Medical Affairs, Otsuka Pharmaceutical Development and Commercialization Inc., Rockville, MD, 4Health Economics and Outcomes Management, 5Global Clinical Development, Otsuka Pharmaceutical Development and Commercialization Inc., Princeton, NJ, USA Background: As the capabilities and reach of technology have expanded, there is an accompanying proliferation of digital technologies developed for use in the care of patients with mental illness. The objective of this review was to systematically search published literature to identify currently available health technologies and their intended uses for patients with serious mental illness.Materials and methods: The Medline, Embase, and BIOSIS Previews electronic databases were searched to identify peer-reviewed English language articles that reported the use of digital, mobile, and other advanced technology in patients with schizophrenia/schizoaffective disorder, bipolar disorder, and major depressive disorder. Eligible studies were systematically reviewed based on Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA guidelines.Results: Eighteen studies that met the inclusion criteria were identified. Digital health technologies (DHTs assessed in the selected studies included mobile applications (apps, digital medicine, digital personal health records, and an electronic pill container. Smartphone apps accounted for the largest share of DHTs. The intended uses of DHTs could be broadly classified as monitoring to gain a better understanding of illness, clinical assessment, and intervention. Overall, studies indicated high usability/feasibility and efficacy/effectiveness, with several reporting validity

  9. Simplified application of electronic data processing in a natural science and technology special library in combination with an improved literature description

    Energy Technology Data Exchange (ETDEWEB)

    Bretnuetz, E.

    1975-10-01

    A pilot project in a special library for natural science and technology to record bibliographic data on several kinds of literature within a simplified scheme and to process them in a computer by simple programs is described. The printout consists of several lists arranged according to several aspects. At the same time a relevant thesaurus is tested as to its suitability for an improved description of the literature. The results show that the literature handled is identified sufficiently within this simplified scheme. After supplementation by some special terms, the thesaurus can be used for a deeper analysis of the literature. (auth)

  10. Safeguards activities in Japan

    International Nuclear Information System (INIS)

    Osabe, Takeshi

    1998-01-01

    Current Japanese State System for Accountancy and Control (SSAC) has been developing and fully satisfies requirements of both IAEA Safeguards and bilateral partners. However, the public attention on the national and international safeguards activities were increased and the safeguards authorities were required to promote the objective assessment of safeguards implementation to avoid mistrust in safeguards activities which directly influence the public acceptance of nuclear energy in itself. Additionally, since Japan has promoted to complete nuclear fuel cycle including spent fuel reprocessing, enrichment and mixed oxide fuel fabrication this would require further assurance of Japanese non-proliferation commitment. Japan supports the introduction of strengthened safeguards. In this context it is particularly important to strengthen the relationship between national and the IAEA safeguards to contribute actively to the IAEA safeguards in development and utilization of new technologies towards more effective and efficient IAEA safeguards

  11. International Pacific Air and Space Technology Conference and Aircraft Symposium, 29th, Gifu, Japan, Oct. 7-11, 1991, Proceedings

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    Various papers on air and space technology are presented. Individual topics addressed include: media selection analysis: implications for training design, high-speed challenge for rotary wing aircraft, high-speed VSTOL answer to congestion, next generation in computational aerodynamics, acrobatic airship 'Acrostat', ducted fan VTOL for working platform, Arianespace launch of Lightsats, small particle acceleration by minirailgun, free-wake analyses of a hovering rotor using panel method, update of the X-29 high-angle-of-attack program, economic approach to accurate wing design, flow field around thick delta wing with rounded leading edge, aerostructural integrated design of forward-swept wing, static characteristics of a two-phase fluid drop system, simplfied-model approach to group combustion of fuel spray, avionics flight systems for the 21st century. Also discussed are: Aircraft Command in Emergency Situations, spectrogram diagnosis of aircraft disasters, shock interaction induced by two hemisphere-cylinders, impact response of composite UHB propeller blades, high-altitude lighter-than-air powered platform, integrated wiring system, auxiliary power units for current and future aircraft, Space Shuttle Orbiter Auxiliary Power Unit status, numerical analysis of RCS jet in hypersonic flights, energy requirements for the space frontier, electrical system options for space exploration, aerospace plane hydrogen scramjet boosting, manual control of vehicles with time-varying dynamics, design of strongly stabilizing controller, development of the Liquid Apogee Propulsion System for ETS-VI

  12. International Pacific Air and Space Technology Conference and Aircraft Symposium, 29th, Gifu, Japan, Oct. 7-11, 1991, Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    Various papers on air and space technology are presented. Individual topics addressed include: media selection analysis: implications for training design, high-speed challenge for rotary wing aircraft, high-speed VSTOL answer to congestion, next generation in computational aerodynamics, acrobatic airship 'Acrostat', ducted fan VTOL for working platform, Arianespace launch of Lightsats, small particle acceleration by minirailgun, free-wake analyses of a hovering rotor using panel method, update of the X-29 high-angle-of-attack program, economic approach to accurate wing design, flow field around thick delta wing with rounded leading edge, aerostructural integrated design of forward-swept wing, static characteristics of a two-phase fluid drop system, simplfied-model approach to group combustion of fuel spray, avionics flight systems for the 21st century. Also discussed are: Aircraft Command in Emergency Situations, spectrogram diagnosis of aircraft disasters, shock interaction induced by two hemisphere-cylinders, impact response of composite UHB propeller blades, high-altitude lighter-than-air powered platform, integrated wiring system, auxiliary power units for current and future aircraft, Space Shuttle Orbiter Auxiliary Power Unit status, numerical analysis of RCS jet in hypersonic flights, energy requirements for the space frontier, electrical system options for space exploration, aerospace plane hydrogen scramjet boosting, manual control of vehicles with time-varying dynamics, design of strongly stabilizing controller, development of the Liquid Apogee Propulsion System for ETS-VI.

  13. The role of home-based information and communications technology interventions in chronic disease management: a systematic literature review.

    Science.gov (United States)

    Gaikwad, Rekha; Warren, Jim

    2009-06-01

    This article presents a systematic literature review done to evaluate the feasibility and benefits of home-based information and communications technology enabled interventions for chronic disease management, with emphasis on their impact on health outcomes and costs. Relevant articles were retrieved from PubMed and evaluated using quality worksheets with pre-identified inclusion and exclusion criteria. Of the 256 articles retrieved, 27 were found to concord with the study criteria. Evaluation of the identified articles was conducted irrespective of study design, type of home-based intervention or chronic disease involved. The review demonstrates that HBIs applied to chronic disease management improve functional and cognitive patient outcomes and reduce healthcare spending. However, further research is needed to assess benefit in terms of evidence-based outcome indicators (that can provide a basis for meta-analysis), to confirm sustainable cost benefits, and to systematically collect data on physician satisfaction with patient management.

  14. Workarounds to Intended Use of Health Information Technology: A Narrative Review of the Human Factors Engineering Literature.

    Science.gov (United States)

    Patterson, Emily S

    2018-05-01

    Objective To integrate and synthesize insights from recent studies of workarounds to the intended use of health information technology (HIT) by health care professionals. Background Systems are safest when the documentation of how work is done in policies and procedures closely matches what people actually do when they are working. Proactively identifying and managing workarounds to the intended use of technology, including deviations from expected workflows, can improve system safety. Method A narrative review of studies of workarounds with HIT was conducted to identify themes in the literature. Results Three themes were identified: (1) Users circumvented new additional steps in the workflow when using HIT, (2) interdisciplinary team members communicated via HIT in text fields that were intended for other purposes, and (3) locally developed paper-based and manual whiteboard systems were used instead of HIT to support situation awareness of individuals and groups; an example of a locally developed system was handwritten notes about a patient on a piece of paper folded up and carried in a nurse's pocket. Conclusion Workarounds were employed to avoid changes to workflow, enable interdisciplinary communication, coordinate activities, and have real-time portable access to summarized and synthesized information. Application Implications for practice include providing summary overview displays, explicitly supporting role-based communication and coordination through HIT, and reducing the risk to reputation due to electronic monitoring of individual performance.

  15. Wind Energy Japan

    Energy Technology Data Exchange (ETDEWEB)

    Komatsubara, Kazuyo [Embassy of the Kingdom of the Netherlands, Tokyo (Japan)

    2012-06-15

    An overview is given of wind energy in Japan: Background; Wind Energy in Japan; Japanese Wind Energy Industry; Government Supports; Useful Links; Major Japanese Companies; Profiles of Major Japanese Companies; Major Wind Energy Projects in Japan.

  16. Electronic manufacturing and packaging in Japan

    Science.gov (United States)

    Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John A.; Meieran, Eugene S.; Pecht, Michael; Peeples, John W.; Tummala, Rao R.

    1995-01-01

    This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies. Japan has established this marked competitive advantage in electronics as a consequence of developing low-cost, high-volume consumer products. Japan's infrastructure, and the remarkable cohesiveness of vision and purpose in government and industry, are key factors in the success of Japan's electronics industry. Although Japan will continue to dominate consumer electronics in the foreseeable future, opportunities exist for the United States and other industrial countries to capture an increasingly large part of the market. The JTEC panel has identified no insurmountable barriers that would prevent the United States from regaining a significant share of the consumer electronics market; in fact, there is ample evidence that the United States needs to aggressively pursue high-volume, low-cost electronic assembly, because it is a critical path leading to high-performance electronic systems.

  17. Affective World Literature

    DEFF Research Database (Denmark)

    Vilslev, Annette Thorsen

    The PhD dissertation compares the literary theory and novels of modern Japanese writer Natsume Sōseki. It reads Sōseki’s Theory of Literature (2009, Bungakuron, 1907) as an inherently comparative and interdisciplinary approach to theorizing feelings in world literature. More broadly, the disserta......The PhD dissertation compares the literary theory and novels of modern Japanese writer Natsume Sōseki. It reads Sōseki’s Theory of Literature (2009, Bungakuron, 1907) as an inherently comparative and interdisciplinary approach to theorizing feelings in world literature. More broadly......, the dissertation investigates the critical negotiation of the novel as a travelling genre in Japan in the beginning of the 20th century, and, more specifically, Sōseki’s work in relation to world literature and affect theory. Sōseki’s work is highly influential in Japan and East Asia, and his novels widely...... circulated beyond Japan. Using Sōseki’s theory as an example, and by comparing it to other theories, the dissertation argues that comparative literature needs to include not only more non-Western literature but also more non-Western literary theories in the ongoing debate of world literature. Close...

  18. Nuclear services for Japan

    International Nuclear Information System (INIS)

    Anderson, B.

    1991-01-01

    The UK Atomic Energy Authority (UKAEA) became AEA Technology in April 1990. The commercial interests are focussed through 4 business units: AEA Reactor Services, with whom several contracts have been won from Japanese customers for high resolution Field Emission Gun Scanning Transmission Electron Microscopy (FEGSTEM); AEA Fuel Services, a contract is being negotiated with an existing Japanese customer; AEA Decommissioning and Radwaste, with whom further development of an alternative approach to evaporation of liquid waste effluent for specific application in Japan is in progress; AEA Fusion. 1 fig

  19. Bibliographic data on surface processes in particle-material interactions published in Japan, 1986-1987

    International Nuclear Information System (INIS)

    Gesi, Kazuo; Nagai, Siro; Ozawa, Kunio.

    1989-01-01

    Data on surface processes in particle-material interactions for fusion technology have been surveyed and collected over 24 publications which have been published during January, 1986 - December, 1987 in Japan. The bibliographic data in the form of data sheets were sent to the International Data Center in IAEA. This report presents 97 selected data sheets arranged in the order of codes of relevant phenomena. A list of literature is given. (author) 159 refs

  20. HIT-Sanyo: Revolutionary technology, what is the truth and what a hoax? New technology from Japan tested in Germany; ''Sanyo-HIT: Revolutionaere Technik oder mehr Schein als Sein?''. Neue Technik aus Japan in Deutschland erprobt

    Energy Technology Data Exchange (ETDEWEB)

    Rust, T. [Atmosphaere GmbH, Laatzen (Germany); Kohake, D. [Fachhochschule Gelsenkirchen (Germany). Fachbereich Elektrotechnik; Rossner, M. [Fachhochschule Coburg (Germany). Fachbereich Elektrotechnik und Informatik

    2004-07-01

    The new modules from Japanese manufacturer Sanyo with the HIT-Technology are supposed to have the worlds best efficiency. In addition the manufacturer claims that by the HIT-Technology the modules supply more energy output compared to conventional crystalline solar modules. This article tries to prove these statements by outdoor investigation. Measurements of one grid connected system, which contains Sanyo, Kyocera and Ersol modules, show that Sanyo modules have at least 7% more energy output than the other modules. DC-measurements at Sanyo and BP modules even prove that due to the low temperature coefficient the Sanyo modules cope better with high cell temperatures compared to the BP ones. In addition the inspection sheets given by Sanyo seem to contain lower power data than determined in field measurements which may be caused by the different spectral consistence of the test light in Japan. The data collected during the second half of 2003 reveals that systems with Sanyo modules can provide 7% and more plus of energy output than systems with other well-known modules. Nevertheless it will be interesting to gather long time data of plants with Sanyo modules in order to achieve a statement of how the energy output evolves during the period of at least one year. (orig.)

  1. JPRS Report Science & Technology Japan

    Science.gov (United States)

    1989-10-25

    Ernaehrungsphysiologie Max-Planck-Institut fuer Biochemie Institut fuer Biochemie, Ludwig-Maximilian-Universitaet Instituto di Chimica, Facolt’ di Medicina ...issue to be discussed from the administrative and legal perspectives] (1) Board of Directors This is a board whose members are scientists. The...envisaged; 3. The participants urge that the time is now ripe for the governments of the countries involved to discuss an appropriate legal

  2. Japan Report, Science and Technology.

    Science.gov (United States)

    1987-04-10

    than 0.1 yg/m£. However, several Candida genus yeasts, as well as C. maltosa, possess a cycloheximide resistance and in the case of C. maltosa...Suppose acquisition of the technique is the objective, whether acquisition of such stereotyped techniques is meaningful or not is questionable

  3. JPRS Report Science & Technology Japan

    Science.gov (United States)

    1989-05-04

    POLICY R&D Trends in Industry Assessed [Bonn TECHNOLOGIE NACHRICHTEN -MANAGEMENT INFORMATIONEN, 30 Sep 88] 17 TELECOMUNICATIONS Business To Expand Use...Industry Assessed 3698m051 Bonn TECHNOLOGIE NACHRICHTEN - MANAGEMENTINFORMATIONEN, in German No 488, 30Sep88pp 13-14 [Excerpts] With a yearly investment

  4. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    1987-11-12

    typical success story, a second Konosuke Matsushita . He is a hardworking man who has suffered through much toil and labor. During his childhood, he...both companies. However, when the cases of Matsushita Electric Industrial Co., which transferred the president’s post from Matsushita Konosuke to... Matsushita Seiji to Yamashita Toshihiko to Tanii Akio, and Sharp Corp., which passed on the post from Hawakawa Tokuji to Saeki Akira to Tsuji Haruo are

  5. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    1987-06-29

    analysis was con- ducted of the properties of adsorbents, operating conditions, and unit prices of materials. In the case of a four-layer structure with...organic adsorbents of the amidoxime system and dithio carbamate system, and new 29 adsorbents originating from biotic bodies such as tannin , are being

  6. JPRS Report, Science & Technology, Japan.

    Science.gov (United States)

    1988-04-13

    filter 9. Holder The following gram-positive and gram-negative bacteria were aerobically cultivated at a temperature of 37°C for 18 hours in a Rogosa...a strong magnetic field (magnetic confinement) or laser beams or particle beams ( inertial confinement) in order to confine the plasma. The magnetic...development of a new field? d. How great an impact will your achievement make on the world of science? e. Train yourself in writing good English

  7. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    1988-11-10

    Kitazawa Takehiko Ishiguro Junji Fujie Hidetoshi Fukuyama Shinya Hasuo Osamu Horigami Keizo Ishikawa Yuzo Katayama Ushio Kawabe Yoichi Kimura...Committee Chairman Member II II II Hisao Hayakawa Yoshio Furuto Yasuo Hashimoto Kaoru Inagaki Hiroo Kinoshita Kanji Ohya Hideaki Okino Sakae

  8. JPRS Report, Science & Technology, Japan.

    Science.gov (United States)

    1988-05-04

    360 tons of HAP ( hydroxyapatite ) for medical applications, as food additives, and for use in tooth pastes is imported. There are plenty of raw...1.3 1.6 10 PTCR 34.0 9.4 74.7 20.7 30 Gas sensors Inflammable 0.3 0.9 0.6 1.9 30 CO 0.6 2.4 3.5 14.1 181.3 °2 IR sensors 0.7 11.7 1.5 21.2 22.5

  9. JPRS Report, Science & Technology Japan.

    Science.gov (United States)

    1989-07-11

    JOURNAL OF THE JAPANESE ASSOCIATION OF CRYSTAL GROWTH, 10 Jul 88] 33 Fast Diamond Film Synthesis by Arc Discharge [ Fumio Akatsuka, Yoichi Hirose, et...Japanese 10 Jul 88 p 60 [Article by Fumio Akatsuka and Yoichi Hirose, Nihon Kogyo Daigaku: "High- Speed Synthesis of Diamond Thin Film by Arc...RCSPCNCF «N*l r-t»cii*i(OH Figure 5. Response Component Strength References 1. Manahu Kasai , "Subsystem Recovery by DMAP of Broad-Sense CMS of

  10. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    1988-03-03

    function of nematodes and Mitsubishi Electric Corp. is researching the nervous system of the sea hare. This research is aimed at clarify- ing the...First Clean roon Direct nold- ing with 50/jffi aoeuraey ■-» •: Final inspee lion ins Laser To nark- «_ Final ing size inspeo- .- vacuun...transportation of radioactive substances and Y3.7 mil- lion to confirm the safety of transportation of radioac- tive substances. It will also spend Y3

  11. JPRS Report Science & Technology Japan

    Science.gov (United States)

    1989-06-02

    velocity 6 , thermal expansion of GdBa2Cu30y_„ 7 , internal friction 8 , positron annihilation 9 et al. According to the above phenomena, we suggest...thickness is deposited on a MgO (100) substrate using a target of Bi. .Sr.Ca^^ 50 followed by annealing at 875 °C for 0.5 h. A partially melted...vicinity of the targets was 1 to 1.2 Pa. The substrate was cleaved (001) MgO and the substrate temperature (Ts) was varied from RT to 700 0. The

  12. JPRS Report Science & Technology Japan

    Science.gov (United States)

    1989-03-02

    critical particle diameter is introduced, these results could be explained by martensite -type phase transformation . 30 825-C 765min. Ww8r\\Vu *AÖ...enlarged by hydrolysis and aging at high pH and by the addition of a DCCA; at the same time, the gel structure is strengthened . Also, shrinking of gel...container) (Supercritical frying lu a Constant temper - (ature pinhole (10d )-»WC pinhole (7d). 60TC pinhole (3 dj-WC pinhole (3d)| f j WC

  13. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    1987-12-02

    Co., Ltd. Mazda Motor Corp. improvement in wear resistance of machine tools, measuring instruments, valves, pumps and bearings, in addition to the...becomes an important strategy . There are many examples of lenient tieups, such as joint research and license exchange when the cooperator is a...European enterprise, however, the trend is becoming strong toward rather strict cooperation, even demanding the establishment of a joint corporation when

  14. JPRS Report, Science & Technology, Japan.

    Science.gov (United States)

    1988-06-25

    Considering the sales performance of the already launched drugs "Calan" [generic name: vinpocetine] and "Hopate" [generic name: calcium hopantenate] sold...subcutaneous injection of a special microcapsule , containing a drug, and delivers the drug gradually from this subcutaneous pool. Once a frontier...ceramics —> Aluminum nitride, high purity alumina, silicon carbide, partial stabilized zirconia. Advanced composite materials —t Carbon fiber prepregs

  15. Japan Report, Science and Technology.

    Science.gov (United States)

    1986-12-15

    of Km to one-one hundredth and consequent 25 time rise of the enzyme activity. It is well known that the archetype cancer gene of the vertebrate, C-Ha... glyphosate (N-phosphornomethylglycine), a herbicide used in a wide range against Salmonella typhimirium, weeds, grains, etc. -- the gene aro holds...same university, the Pharmacological Department of Hokkaido University, the Kyowa Hakko Kogyo Corp., and the National Cancer Center; they are pressing

  16. Japan Report, Science and Technology.

    Science.gov (United States)

    1987-05-06

    Chibata, KOTEIKA KOSO [IMMOBILIZED ENZYME], Kodansha Publishing Co., 1975. 2. K. Mosback, "Methods in Enzymology ," IMMOBILIZED ENZYME, Vol 44...continuously in a high molecular solute mixture, an invertase immobilized membrane with separa- tion functions is needed which enables the high...the Lineweaver-Burk plot of hydrolysis reactions of a sucrose solution when passing through an invertase immobilized membrane 22 which is prepared

  17. Japan Report, Science and Technology.

    Science.gov (United States)

    1987-04-03

    substances from plants Removal of fats and oils from snacks , such as potato chips Separation of chemical materials from natural resources Separation of...mechanically, and will be molded in order to make an ingot. This ingot will be worked plastically, i.e., extruded or forged with a view to variously...ym. Also to be noted, is that the extruded undulations are prone to erode polyethylene. Yamamoto: Since surface roughness of alumina is 0.04 ym or

  18. mHealth Application Areas and Technology Combinations*. A Comparison of Literature from High and Low/Middle Income Countries.

    Science.gov (United States)

    Abaza, Haitham; Marschollek, Michael

    2017-08-08

    With the continuous and enormous spread of mobile technologies, mHealth has evolved as a new subfield of eHealth. While eHealth is broadly focused on information and communication technologies, mHealth seeks to explore more into mobile devices and wireless communication. Since mobile phone penetration has exceeded other infrastructure in low and middle-income countries (LMICs), mHealth is seen as a promising component to provide pervasive and patient-centered care. The aim of our research work for this paper is to examine the mHealth literature to identify application areas, target diseases, and mHealth service and technology types that are most appropriate for LMICs. Based on the 2011 WHO mHealth report, a combination of search terms, all including the word "mHealth", was identified. A literature review was conducted by searching the PubMed and IEEE Xplore databases. Articles were included if they were published in English, covered an mHealth solution/ intervention, involved the use of a mobile communication device, and included a pilot evaluation study. Articles were excluded if they did not provide sufficient detail on the solution covered or did not focus on clinical efficacy/effectiveness. Cross-referencing was also performed on included articles. 842 articles were retrieved and analyzed, 255 of which met the inclusion criteria. North America had the highest number of applications (n=74) followed by Europe (n=50), Asia (n=44), Africa (n=25), and Australia (n=9). The Middle East (n=5) and South America (n=3) had the least number of studies. The majority of solutions addressed diabetes (n=51), obesity (n=25), CVDs (n=24), HIV (n=18), mental health (n=16), health behaviors (n=16), and maternal and child's health (MCH) (n=11). Fewer solutions addressed asthma (n=7), cancer (n=5), family health planning (n=5), TB (n=3), malaria (n=2), chronic obtrusive pulmonary disease (COPD) (n=2), vision care (n=2), and dermatology (n=2). Other solutions targeted stroke, dental

  19. Competition in Japan

    OpenAIRE

    Michael E. Porter; Mariko Sakakibara

    2004-01-01

    This article examines competition in Japan and its link to postwar economic prosperity. While Japan's industrial structure and competition policy seem to indicate that competition in Japan has been less intense, the empirical evidence does not support this conclusion. The sectors in which competition was restricted prove to be those where Japan was not internationally successful. In the internationally successful sectors, internal competition in Japan was invariably fierce. While the level of...

  20. Using Technology in the Languages Classroom from the 20th to the 21st Century: A Literature Review of Classroom Practices and Fundamental Second Language Learning Theories

    Science.gov (United States)

    Hess, Cherie

    2011-01-01

    In this paper, the literature related to the use of technology in the languages classroom will be explored. In relation to the teaching and learning methodologies and approaches past and present as well as current research, comparisons are made between the audio-lingual/visual classroom and the digital classroom by way of describing and comparing…

  1. Romanticising Shinsengumi in Contemporary Japan

    OpenAIRE

    Rosa Lee

    2011-01-01

    Shinsengumi, a group of young men recruited by the Bakufu to protect Kyoto from radical Imperial House loyalists in the tumultuous Bakumatsu period, is romanticised and idolised in Japan despite its limited place in history. This article attempts to comprehend this phenomenon by locating the closest crystallisation of popularly imagined Shinsengumi in Moeyo ken, a popular historical fiction by Shiba Ryōtarō. Antonio Gramsci explains readers are attracted to popular literature because it refle...

  2. FY 1999 report on the survey of the history/inheritance of industrial technology. Survey of the inheritance/education of technology in museums of industrial technology in Japan; 1999 nendo sangyo gijutsu rekishi keisho chosa hokokusho. Kokunai sangyo gijutsu hakubutsukan ni okeru gijutsu keisho keihatsu chosa hen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of clarifying the course of promotion of the original/creative future R and D and contributing to selection of technical themes and working-out of developmental methods, survey was conducted paying visits to museums of industrial technology in Japan which evaluate/preserve/exhibit/utilize memorial goods, data, information pertaining to the industrial technology in Japan. Museums for survey were the following ten: Chiba Museum of Science and Industry; Garasu no Sato (Glass Village); Maizuru World Brick Museum; Museum of Industrial Technology; Numata Memorial Hall/Mitsutoyo Museum of Dimensional Metrology; Omachi Energy Museum; Sake Museum; Saint Juan Bautista Museum; Subway Museum; Textile Museum Yukari. One of the points of this survey was to survey the actual state of the experimental type exhibition. The experimental type exhibition, which is wide in sphere, seems to be effective since visitors can operate it, simulate it, feel its size and make scientific experiments. However, the museums are not necessarily satisfied with the present situation. (NEDO)

  3. An Approach for Doctoral Students Conducting Context-Specific Review of Literature in IT, ICT, and Educational Technology

    Science.gov (United States)

    Pretto, Gabriella; Curró, Gina

    2017-01-01

    Since 1980s the rate of technological change has been phenomenal, creating an impact on the information-seeking behaviors of doctoral students and other researchers. When searching the three fields of Information Technology (IT), Information and Communication Technology (ICT), and Educational Technology (EdTech), it is like opening a Pandora's…

  4. Institutionalisation of Japan Identity Construction Policy

    Directory of Open Access Journals (Sweden)

    Zadvornaya Elena S.

    2016-09-01

    Full Text Available The article is devoted to the development of the modern politics of identity construction in Japan, which actively refers to the practice of designing self-image in international relations. This trend dates back to the 19th century, when there was the end of Sakoku (Japan’s policy of isolation. It is now possible to talk about the institutionalization of the identity construction policy to organized structures and regulations. Enhanced efforts in the field of Japanese traditional and popular culture, education and creative content has led to a number of institutions appearance (like Japan Foundation Fund, Japan Creative Agency, Japan Culture Fund, Agency for Cultural Affairs, Cool Japan Fund, Japan brand Fund and changing idea about the role of culture in foreign policy realization (it is fixed the documents of the Japanese Ministry of Foreign Affairs, the Ministry of Land, Infrastructure, Transport and Tourism, the Ministry of Education, Culture, Sports, Science and Technology, the Ministry of Economy, Trade and Industry, as well as a number of projects (Cool Japan, Visit Japan, Japan Culture Power, Japan Manga Awards, Kawaii Ambassadors, Cosplay International Fest and etc.. These efforts are aimed at forming Japan identity abroad to solve a number of foreign policy challenges of the future and the development of economic cooperation. The Japanese government nearest plans is to increase funding in order to create a positive image of Japan in the region of East Asia. All of these allows us to speak about the policy of the Japanese construction of identity as an institutionalized process in which there was clearance of organizations and regulatory activities.

  5. Fiscal 1999 research report. Japan-U.S. comparative research on energy technology transfer and innovative industry support; 1999 nendo energy gijutsu wo chushinto shita gijutsu iten oyobi shinki sangyo ikusei no Nichibei hikaku ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Japan-U.S. comparative research was made on technology transfer and innovative industry support. The U.S. industry is greatly benefited by universities, which is consequently strengthening the international competitiveness of the U.S. economy. However, the partnerships between private firms and universities have no fixed pattern, and keep changing dynamically. Business incubators increased to 627 rapidly, and mainly supported by municipal governments and universities. The U.S. has a well-established mechanism of technology transfer, and has succeeded in many cases. Not only universities but also national laboratories commit to technology transfer to venture businesses, and after starting businesses, entrepreneurs can use various hedging systems which are expected to play a role promoting the future technology innovation. The U.S. also has many advanced areas for sustainable technology innovation, like Silicon Valley, and these areas contain many supporting bodies to help new businesses. The activity of these bodies is very suggestive to Japanese local platforms promoting technology innovation and new local industry creation. Study was also made on the possibility of technology exchanges with overseas advanced areas. (NEDO)

  6. Organic photovoltaic energy in Japan

    International Nuclear Information System (INIS)

    2007-01-01

    Japan finances research programs on photovoltaic conversion since 1974. Research in this domain is one of the 11 priorities of NEDO, the agency of means of the ministry of economy, trade and industry of Japan. The search for an abatement of production costs and of an increase of cells efficiency is mentioned in NEDO's programs as soon as the beginning of the 1990's. A road map has been defined which foresees photovoltaic energy production costs equivalent to the ones of thermal conversion by 2030, i.e. 7 yen/kWh (4.4 cents of euro/kWh). The use of new materials in dye-sensitized solar cells (DSSC) or organic solar cells, and of new structures (multi-junctions) is explored to reach this objective. The organic photovoltaic technology is more particularly considered for small generation units in mobile or domestic technologies. Japan is particularly in advance in the improvement of DSSC cells efficiency, in particular in the domain of the research on solid electrolytes. Europe seems more in advance in the domain of the new generation of organic solar cells. Therefore, a complementarity may be found between Japan and French teams in the domain of organic solar cells improvement through collaboration programs. (J.S.)

  7. Food Irradiation in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Kawabata, T.

    1981-09-15

    Since 1967 research activities on food irradiation in Japan have been carried out under the National Food Irradiation Programme by the Japanese Atomic Energy Commission. The programme has been concentrated on the technological and economical feasibility and wholesomeness testings of seven irradiated food items of economic importance to the country, i.e. potatoes, onions, wheat, rice, 'kamaboko' (fish-paste products), 'Vienna' sausages and mandarin oranges. By now most studies, including wholesomeness testings of these irradiated food items, have been completed. In Japan, all foods or food additives for sale are regulated by the Food Sanitation Law enforced in 1947. Based on studies made by the national programme, irradiated potatoes were given 'unconditional acceptance' for human consumption in 1972. At present, irradiated potatoes are the only food item which has so far been approved by the Minister of Health and Welfare. Unless the Minister of Health and Welfare has declared that items are not harmful to human health on obtaining comments from the Food Sanitation Investigation Council, no irradiated food can be processed or sold. In addition, the import of irradiated foodstuffs other than potatoes from foreign countries is prohibited by law.

  8. Japan country report

    Energy Technology Data Exchange (ETDEWEB)

    Morisaki, Rieko [Energy Communication Planning, 3-9-16 Aobadai, 818-0137 Dazaifu (Japan)

    2008-07-01

    volume of work. Nuclear competencies (Needs, education and training): It's serious subject how the Japanese nuclear industries maintain sufficient robustness in the fields of technology, safety, and personnel in twenty-five years or more before new wave of replacement begins. Countermeasures in 'Japan's Nuclear Energy National Plan (2006)' are as follows: - Development of a Japanese next-generation LWRs. Next-generation LWRs that can compete in world markets. The first united private/public sector national project in 20 years. - Assist on-site engineer training and skills transfer. Local initiatives regarding personnel development and passing down of skills beyond the boundaries of individual business enterprises. For more than 20,000 people (in Aomori, Fukui, Niigata/Fukushima). - Creating nuclear energy training program for universities, etc. Develop course materials, invite instructors from industry. Support basic technology fields underlying nuclear energy. Provide students with opportunities to experience a reality and appeal of the nuclear industry and research laboratories. WIN-Japan 2007 Main Achievements: WIN-Japan organizes town hall meetings for women a few times a year, technical Tour of Kashiwazaki-Kariwa NPS, and Support for female university students to select their course.

  9. The impact of technology on the wilderness experience: A review of common themes and approaches in three bodies of literature

    Science.gov (United States)

    John Shultis

    2012-01-01

    In the last decade, increasing concern has been expressed about the impact of new technologies - especially communication technologies - on the wilderness experience. Many authors have suggested a tipping point has been reached, with new technologies changing the very nature of the 'traditional' wilderness experience in various ways. The loss of direct...

  10. Nuclear energy in Japan

    International Nuclear Information System (INIS)

    Guillemard, B.

    1978-01-01

    After having described the nuclear partners in Japan, the author analyzes the main aspects of Japan's nuclear energy: nuclear power plants construction program; developping of light water reactors; fuel cycle politics [fr

  11. New Sunshine Project for fiscal 1997 on the international cooperation project. Cooperation in solar energy technologies among Japan, Australia and other countries; 1997 nendo new sunshine keikaku kokusai kyoryoku jigyo. Nichigo nado taiyo energy gijutsu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes the state of progress in the cooperation in solar energy technologies among Japan, Australia and other country, the memorandum concluded for the new project, and the activity report on the NEDO/MUERI project. The progress in the cooperation in solar energy technologies among Japan, Australia and other country is divided into that of the new project and that of the continued project. The former relates to the start of the long-term endurance test project for photovoltaic solar modules in Oman. The location of the endurance test is the Sultan Qaboos University in the suburb of Muscat. Modules subjected to the endurance test consist of ten modules of five types. The test will be performed on air temperature, humidity, wind directions, insolation on horizontal surface, insolation on slanted surface, ultraviolet ray intensity, module temperatures, and electric characteristics of the modules. The continued project is an outdoor endurance test for the photovoltaic solar modules begun in fiscal 1996, which is executed by the Murdock University Energy Research Institute (MUERI). The endurance test locations were selected at Darwin, Alice Springs and Perth. This paper reports the photovoltaic solar module endurance test and investigation, as well as the periodical consultations as the activity report of the NEDO/MUERI project. (NEDO)

  12. FY 1999 survey report on the survey to grasp new technologies for destruction of freons, etc. in Japan; 1999 nendo Nippon no atarashii freon nado hakai gijutsu no haaku chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    At the end of 1995, a total abolition of the production of the specified freons (CFC) was achieved. In future, it will be important to proceed with the appropriate recovery/destruction of the CFC, etc. which has been used so far, not only for the protection of ozone layer, but for the prevention of global warming. For the international study of facilities (technology) for destruction CFC, etc., the Technical Assessment Committee (TAC) was installed for destruction technology of ozone layer depletion substances (ODS) under the United Nations Environment Programme (UNEP), and the destruction efficiency (DE) of ODS was set up. In Japan, more than 30 facilities are already handling the destruction of CFC on a commercial basis. The number is expected to increase by the promotion of protection of ozone layer and prevention of global warming. This survey indicated quantitatively and qualitatively based on the TAC DE what the facilities for destruction of CFC should be which were considered of domestic laws in Japan, and was made a guide for existing facilities and ones to be newly installed. (NEDO)

  13. Advanced Methods for Incorporating Solar Energy Technologies into Electric Sector Capacity-Expansion Models: Literature Review and Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, P.; Eurek, K.; Margolis, R.

    2014-07-01

    Because solar power is a rapidly growing component of the electricity system, robust representations of solar technologies should be included in capacity-expansion models. This is a challenge because modeling the electricity system--and, in particular, modeling solar integration within that system--is a complex endeavor. This report highlights the major challenges of incorporating solar technologies into capacity-expansion models and shows examples of how specific models address those challenges. These challenges include modeling non-dispatchable technologies, determining which solar technologies to model, choosing a spatial resolution, incorporating a solar resource assessment, and accounting for solar generation variability and uncertainty.

  14. Technology-based counseling in the management of weight and lifestyles of obese or overweight children and adolescents: A descriptive systematic literature review.

    Science.gov (United States)

    Kaakinen, Pirjo; Kyngäs, Helvi; Kääriäinen, Maria

    2018-03-01

    The number of overweight and obese children and adolescents has increased worldwide. Obese children and adolescents need counseling interventions, including technology-based methods, to help them manage their weight by changing their lifestyles. To describe technology-based counseling interventions in supporting obese or overweight children and adolescents to change their weight/lifestyle. Descriptive systematic literature review. A literature search was conducted using Cinahl, Medline, PsycINFO, and Medic databases in September 2010 and updated in January 2015. Predefined inclusion criteria were used for the search. After a quality assessment, 28 studies were included in the data extraction. No statistically significant difference in BMI was detected between the intervention and control groups. However, in some studies, it was found that BMI decreases and there were statistically significant differences in fruit and vegetable consumption. In two studies, differences in physical activity were detected between the intervention and control groups, but in eight studies, the difference was not significant. Goal setting and feedback on progress support physical activity and changes in diet. This study identifies available technology interventions for obese or overweight children and adolescents. It seems that using technology-based counseling intervention may encourage obese and overweight children and adolescents to pursue a healthier lifestyle.

  15. Fiscal 1999 survey report. Survey of long-term strategy for energy technology: Volume 1 (Survey of foundation for strategy formulation for industrial technologies - strategy for environmental foundation buildup); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. 1. Sangyo gijutsu senryaku sakutei kiban chosa (kankyo kiban seibi senryaku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Japan has to prepare itself to behave accurately, and to stay technologically competitive, in the severe competition age to come in which it will fail to find leaders to follow. To fulfill this goal, Japan has to collect sufficient information and analyze it relative to the current state and future prospect of industrial technologies in Japan and overseas and various factors that will influence them, and to develop industrial technology related policies based firmly on scientific and theoretical foundations to be established using the thus-acquired knowledge. Under the circumstances, a survey is conducted of innovative, technological foundations, such as industrial technology related efforts in and out of Japan. The report consists of two volumes that cover what are described below. For the survey of technology related policies pursued in various countries abroad, literature and the like are investigated concerning technology related measures, budgets, and decision making processes in America, Britain, Germany, France, and the European Union, and the results are compiled so that their systems may be compared with each other. In the survey of Japan's technology related innovative systems, case studies are made about commodities over which Japan is relatively high in competitive power. Specifically, commodities manufactured by Japan's businesses and occupying 75% or more of the global share are investigated. (NEDO)

  16. Fiscal 1999 survey report. Survey of long-term strategy for energy technology: Volume 1 (Survey of foundation for strategy formulation for industrial technologies - strategy for environmental foundation buildup); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. 1. Sangyo gijutsu senryaku sakutei kiban chosa (kankyo kiban seibi senryaku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Japan has to prepare itself to behave accurately, and to stay technologically competitive, in the severe competition age to come in which it will fail to find leaders to follow. To fulfill this goal, Japan has to collect sufficient information and analyze it relative to the current state and future prospect of industrial technologies in Japan and overseas and various factors that will influence them, and to develop industrial technology related policies based firmly on scientific and theoretical foundations to be established using the thus-acquired knowledge. Under the circumstances, a survey is conducted of innovative, technological foundations, such as industrial technology related efforts in and out of Japan. The report consists of two volumes that cover what are described below. For the survey of technology related policies pursued in various countries abroad, literature and the like are investigated concerning technology related measures, budgets, and decision making processes in America, Britain, Germany, France, and the European Union, and the results are compiled so that their systems may be compared with each other. In the survey of Japan's technology related innovative systems, case studies are made about commodities over which Japan is relatively high in competitive power. Specifically, commodities manufactured by Japan's businesses and occupying 75% or more of the global share are investigated. (NEDO)

  17. The State-of-the-Art of Collaborative Technologies for Initial Vocational Education: A Systematic Literature Review

    Directory of Open Access Journals (Sweden)

    Beat A. Schwendimann

    2018-04-01

    Full Text Available Future workplaces require collaboration skills in which members of different work communities use technologies to solve complex problems. Vocational education and training (VET programs need to meet the challenge to prepare students to be part of a competent workforce. Particularly initial vocational education is under pressure to develop learners’ collaboration skills and abilities. To date, however, no attempt has been made to perform a comprehensive review of the use of computer-supported collaborative learning (CSCL technologies across different vocational education settings to account for contextual factors of VET. In this systematic review, 26 published studies were analyzed with respect to their demographics, research methodology, use of technology, and measured outcomes. This review illuminates that research on CSCL still leaves the vocational learning context as an under-represented field of study. At the same time, technologies offer a range of new types of learning possibilities for vocational education. As the direct result of that development, vocational education is increasingly taking place in new technology-enhanced learning settings. Education can benefit from the opportunities of CSCL technologies, but on the other hand, such technologies create new challenges for facilitating vocational learning. Therefore, this review also identifies three topic areas specific to vocational learning (collaborative writing-to-learn, simulations and game-like solutions, and tangible objects and enumerates desirable lines for future research.

  18. SCWR Concepts in Japan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-08-15

    Two SCWR concepts are being developed in Japan, one corresponding to the thermal spectrum reactor and the other to the fast spectrum reactor. Yamada et al. described the thermal-spectrum reactor concept referred to as the Japan SCWR (or JSCWR). This concept was developed under the financial support of the Ministry of Economy, Trade and Industry (METI). The basic philosophy of the JSCWR development is to utilize proven light water reactor and supercritical fossil-fired power plant technologies as much as possible to minimize the R&D cost, time and risks. Therefore, the JSCWR is designed as a thermal neutron spectrum reactor using light water as moderator and reactor coolant. The JSCWR plant consists of a pressure-vessel type, once-through reactor and a direct Rankine cycle system. Reactor coolant fed through inlet nozzles is heated up in the core and flows through outlet nozzles with no recirculation in the vessel. Other options to the JSCWR core design are being investigated at the University of Tokyo. The electric output of the JSCWR is assumed to range from 600 MWe to 1700 MWe class to fulfill user’s requirements as much as possible. In this section, the reference value is selected to 1725 MWe, which corresponds to a reactor thermal output of 4039 MWth. Nakatsuka et al. described the core design for the fast-spectrum reactor, which is based on a similar plant system compared to that of the thermal-spectrum reactor. The fast-spectrum reactor, however, would produce higher power rating than the thermal-spectrum one of the same reactor pressure-vessel size. Since the fast-spectrum reactor does not require the moderator, its unit capital cost would be lower than the thermal-spectrum reactor.

  19. Report on survey in fiscal 2000 on the survey on succession of history of industrial technologies. Survey edition of industrial technologies in Japan that have contributed largely to development of industries; 2000 nendo sangyo gijutsu rekishi keisho chosa hokokusho. Sangyo no hatten ni okiku kiyoshita kokunai sangyo gijutsu no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Surveys and researches have been performed to serve as reference for the future research and development policies by clarifying the innovation process of industrial technologies in Japan and the originality and creativity seen in that process. The surveys have focused on processes born in Japan and evaluated as 'world class' in significance of some kind, and summarized the technology history. The current fiscal year has surveyed newly the following nine processes: industrialization of the sodium glutamate and fructose manufacturing technologies, development of solar cell technologies, industrialization of the manufacturing process of cyclohexnol via cyclohexene, development of the MEK manufacturing process, development and industrialization of hollow fiber reverse osmosis membrane modules for single stage sea water desalination, development and industrialization of the new vitamin B1 intermediate process, development of HSG-Si capacitors for semiconductor memories, and development and industrialization of 4-ethylene fluoride/ethylene copolymer (ETFE). The surveys are considered to have obtained the results abound in suggestions toward original and creative technological developments. (NEDO)

  20. A Brief Review of Literature on Using Technology to Help Language Learners to Improve Their Language Skills

    OpenAIRE

    Eyup Bayram Guzel

    2015-01-01

    People have been fairly interested in what technology offers to them around a scope of human necessities and it has become a part of human life. In this study, experimental studies were reviewed for the purpose of how technology helps language learners improve their phonemic awareness, reading comprehension and vocabulary development skills. As a conclusion, experimental studies demonstrated that students showed significant improvements up to 70% in phonological awaren...

  1. Emerging Use of Early Health Technology Assessment in Medical Product Development: A Scoping Review of the Literature.

    Science.gov (United States)

    IJzerman, Maarten J; Koffijberg, Hendrik; Fenwick, Elisabeth; Krahn, Murray

    2017-07-01

    Early health technology assessment is increasingly being used to support health economic evidence development during early stages of clinical research. Such early models can be used to inform research and development about the design and management of new medical technologies to mitigate the risks, perceived by industry and the public sector, associated with market access and reimbursement. Over the past 25 years it has been suggested that health economic evaluation in the early stages may benefit the development and diffusion of medical products. Early health technology assessment has been suggested in the context of iterative economic evaluation alongside phase I and II clinical research to inform clinical trial design, market access, and pricing. In addition, performing early health technology assessment was also proposed at an even earlier stage for managing technology portfolios. This scoping review suggests a generally accepted definition of early health technology assessment to be "all methods used to inform industry and other stakeholders about the potential value of new medical products in development, including methods to quantify and manage uncertainty". The present review also aimed to identify recent published empirical studies employing an early-stage assessment of a medical product. With most included studies carried out to support a market launch, the dominant methodology was early health economic modeling. Further methodological development is required, in particular, by combining systems engineering and health economics to manage uncertainty in medical product portfolios.

  2. Fiscal 1998 engineer interexchange project (coal mine technology field). International interexchange project (Workshop in Japan); 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya). Kokusai koryu jigyo (kokunai workshop)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the workshop and technical tour held in Japan for technical interexchange of domestic and overseas engineers. From the information obtained, the higher productivity of coal mines is dependent on selective mining under blessed geological conditions, however, basically establishment of an advanced management technique for inexpensive stable operation. Both preliminary collection of geological information and introduction of advanced facilities even under unstable conditions are necessary. The balance and optimization of the whole system, and an excellent human nature for operation are also essential. Use of roof bolt supports is diffusing as improvement technology of excavation speed and roof control technology over the world. However, for introduction of new technologies, collection of test results and various kinds of training are necessary. Methane gas in coal seams as the main theme of the Hokkaido workshop is a precious unused natural resource, and important for prevention of global warming and coal mine protection measures. Its use is dependent on development of gas drainage technology. (NEDO)

  3. Fiscal 1998 engineer interexchange project (coal mine technology field). International interexchange project (Workshop in Japan); 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya). Kokusai koryu jigyo (kokunai workshop)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the workshop and technical tour held in Japan for technical interexchange of domestic and overseas engineers. From the information obtained, the higher productivity of coal mines is dependent on selective mining under blessed geological conditions, however, basically establishment of an advanced management technique for inexpensive stable operation. Both preliminary collection of geological information and introduction of advanced facilities even under unstable conditions are necessary. The balance and optimization of the whole system, and an excellent human nature for operation are also essential. Use of roof bolt supports is diffusing as improvement technology of excavation speed and roof control technology over the world. However, for introduction of new technologies, collection of test results and various kinds of training are necessary. Methane gas in coal seams as the main theme of the Hokkaido workshop is a precious unused natural resource, and important for prevention of global warming and coal mine protection measures. Its use is dependent on development of gas drainage technology. (NEDO)

  4. Changing Pattern and Relation with Technological Level of the Korean and Japanese Export Competitiveness

    Directory of Open Access Journals (Sweden)

    Yongyul Kim

    2010-12-01

    Full Text Available The purpose of this paper is to explore empirically whether export competitiveness of Korea and Japan has changed since 1990s. Unlike existing literature, we tried to grasp changing patterns of export competitiveness by new methodology such as belonging quadrant and moving direction, rather than simply showing its trend or comparison classified by industry. And we categorized 48 sectors into some technological levelsThe purpose of this paper is to explore empirically whether export competitiveness of Korea and Japan has changed since 1990s. Unlike existing literature, we tried to grasp changing patterns of export competitiveness by new methodology such as belonging quadrant and moving direction, rather than simply showing its trend or comparison classified by industry. And we categorized 48 sectors into some technological levels, then analyzed how the change of export competitiveness is distributed by each technological level. When seeing 'revealed comparative advantage' and 'trade specification index', we found considerable changes in export competitiveness. Competitiveness of Korea has rapidly improved while that of Japan has been continuously decreasing. Especially the gap of competitiveness between Korea and Japan has largely reduced around the midterm of 2000s. Shrinking of the gap in export competitiveness has begun from the latter half of 1990s and first half of 2000s. Change of export competitiveness shows different trend by technology level. Korea has gained more competitiveness than Japan in high and middle level of technology. Korea shows upward tendency of competitiveness in mid and high technology, while Japan in low technology. Competitiveness gap between Korea and Japan is rapidly decreasing since the late 1990s, and curtailment of the gap is mainly happening in the high level of technological capabilities.

  5. Review of Literature on Terminal Box Control, Occupancy Sensing Technology and Multi-zone Demand Control Ventilation (DCV)

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Guopeng; Dasu, Aravind R.; Zhang, Jian

    2012-03-01

    This report presents an overall review of the standard requirement, the terminal box control, occupancy sensing technology and DCV. There is system-specific guidance for single-zone systems, but DCV application guidance for multi-zone variable air volume (VAV) systems is not available. No real-world implementation case studies have been found using the CO2-based DCV. The review results also show that the constant minimum air flow set point causes excessive fan power consumption and potential simultaneous heating and cooling. Occupancy-based control (OBC) is needed for the terminal box in order to achieve deep energy savings. Key to OBC is a technology for sensing the actual occupancy of the zone served in real time. Several technologies show promise, but none currently fully meets the need with adequate accuracy and sufficiently low cost.

  6. Japan: 45 Years of INIS

    International Nuclear Information System (INIS)

    Yonezawa, Minoru

    2015-01-01

    I would like to congratulate INIS on its 45th anniversary. Japan is a founding member of this international cooperation program, and the Japan Atomic Energy Agency (formerly, Japan Atomic Energy Research Institute — JAERI) was appointed as the national center of INIS by the Japanese government. We have contributed to the collection, classification, indexing, abstracting and submission of nuclear literature published in our country, as well as promoted the INIS database within our country. I have been engaged in INIS activities for many years and have a lot of experience with INIS. On the occasion of INIS’ 45th anniversary, I would like to look back on this experience. I started my career at JAERI in 1984. The first regional training seminar for the Far East was held in Tokyo in October 1984. I was assigned to the Library Division of JAERI, but I worked as support staff for the regional training seminar. During the seminar, I had an opportunity to attend the technical tour with the seminar participants to the University of Library and Information Science, research laboratories, etc., in Tsukuba Science City. This was my first involvement with INIS. It was a very impressive and interesting experience

  7. Liquid natural gas. Japan

    International Nuclear Information System (INIS)

    Van Kooij, E.

    1998-01-01

    An overview is given of the technical know-how and expertise in Japan with respect to the supply, transport, storage and use of LNG. First the overall energy supply in Japan is outlined. Next, the reasons for the use of LNG as an energy source in Japan are discussed. As an example of a typical LNG-installation in Japan the construction of the Himeji Terminal of Osaka Gas Company is described. Finally, attention is paid to the world's largest and modern below-surface LNG-tanks (capacity of 200,000 m 3 ), installed at the Negishi Terminal of Tokyo Gas Company

  8. Challenge to the enhancement of LWRs in Japan

    International Nuclear Information System (INIS)

    Inoue, T.

    1996-01-01

    Japan was way behind western countries in nuclear power development. This is partly because of the defeat in the second world war which bound Japan to the ban on nuclear power development. As a result, Japan was obliged to take the policy of introducing the power reactor, and its technology, from overseas advanced countries in order to promote the development of power reactors for its own country. (orig.)

  9. Mapping and Auditing Information and Communication Technologies in Library and Information Science Education in Africa: A Review of the Literature

    Science.gov (United States)

    Minishi-Majanja, Mabel K.

    2003-01-01

    Information and communication technologies (ICTs) have become basic ingredients of, and competitive tools in, the information-intensive tertiary/higher education sector. Their increased and specialised use in teaching and learning, research, academic administration, institutional management and information provision translates into greater access…

  10. Using feedback through digital technology to disrupt and change habitual behavior : a critical review of current literature

    NARCIS (Netherlands)

    Sander Hermsen; Reint-Jan Renes; Jeana Frost; Peter Kerkhof

    2016-01-01

    Habitual behavior is often hard to change because of a lack of self-monitoring skills. Digital technologies offer an unprecedented chance to facilitate self-monitoring by delivering feedback on undesired habitual behavior. This review analyzed the results of 72 studies in which feedback from digital

  11. IRBA SERIES : Accounting In Japan

    OpenAIRE

    Arai, Kiyomitsu

    1994-01-01

    Preface / Legal and Conceptual Framework of Accounting in Japan / Setting Accounting Standards in Japan - The American Influence and The Present Status / Accounting Education and Profession in Japan / The International Harmonization of Accounting Standards / The Accounting Standard Setting in Japan and Its Responses to International Accounting Standards / Selected Bibliography for Accounting in Japan

  12. Fusion tritium program in Japan

    International Nuclear Information System (INIS)

    Okamoto, M.; Yoshida, H.; Naruse, Y.

    1988-01-01

    Nuclear Fusion Council, Atomic Energy Commission of Japan, has started to review the nuclear fusion R and D plan for the next stage, post JT-60. The council launched a subcommittee on fundamental issues in the nuclear fusion development in 1985, for review of the basic strategy of a development plan. The subcommittee presented an interim report in Feb. 1986 after 6 months discussion and the report was approved by the Nuclear Fusion Council. Two major R and D programs described in the interim report are the development of a Tokamak type large facility and the comprehensive development of the fusion reactor technology. The latter means to promote the reactor technologies which will be essential in the future to construct not only a D/T burning but also a DEMO reactor. The Nuclear Fusion Development Program in Japan is shown. The interim report recommended to organize two subcommittees to establish an integrated national R and D plan; one was for the design of the next step large facility and the other was for the R and program of the fusion technology. The subcommittee for the latter consisted of 7 working groups; one of them was organized for the tritium technology

  13. FY 1998 result report. Study of a total system for the development of superconductor power application technology (Feasibility study of commercialization of superconductivity technology and study of the introductory effect. Future superconductivity technology development in Japan); 1998 nendo seika hokokusho. Chodendo denryoku oyo gijutsu kaihatsu total system nado no kenkyu chodendo gijutsu no jitsuyoka kanosei oyobi donyu kokanado no chosa (Nippon ni okeru chodendo gijutsu kaihatsu no kongo no hokosei)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    As a part of the New Sunshine Project, 'an R and D project on superconductor power application technology,' an examinational study was made as a mini project to clarify the developmental course for commercialization of superconductor technology. The superconductor technology is being watched with interest as a technology in the 21st century. In the application to the electric power/energy field, in particular, expected are the energy saving effect by high operation efficiency, excellent environmentality, developmental potentiality of new equipment/system by the application of ferromagnetism, etc. Accordingly, the paper analytically arranged the needs of superconductor devices in Japan and abroad and the technology seeds corresponding to the needs, and prepared the developmental subjects of superconductor technology. These developmental steps and the mutual relationship were expressed in an R and D framework. At the same time, as to the superconductivity, a survey outlined the projects carried out in each government office in Japan. The future developmental course was indicated, and proposals were made on the equipment/system as object which are the subjects for urgent development for commercialization. (NEDO)

  14. FY 1998 result report. Study of a total system for the development of superconductor power application technology (Feasibility study of commercialization of superconductivity technology and study of the introductory effect. Future superconductivity technology development in Japan); 1998 nendo seika hokokusho. Chodendo denryoku oyo gijutsu kaihatsu total system nado no kenkyu chodendo gijutsu no jitsuyoka kanosei oyobi donyu kokanado no chosa (Nippon ni okeru chodendo gijutsu kaihatsu no kongo no hokosei)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    As a part of the New Sunshine Project, 'an R and D project on superconductor power application technology,' an examinational study was made as a mini project to clarify the developmental course for commercialization of superconductor technology. The superconductor technology is being watched with interest as a technology in the 21st century. In the application to the electric power/energy field, in particular, expected are the energy saving effect by high operation efficiency, excellent environmentality, developmental potentiality of new equipment/system by the application of ferromagnetism, etc. Accordingly, the paper analytically arranged the needs of superconductor devices in Japan and abroad and the technology seeds corresponding to the needs, and prepared the developmental subjects of superconductor technology. These developmental steps and the mutual relationship were expressed in an R and D framework. At the same time, as to the superconductivity, a survey outlined the projects carried out in each government office in Japan. The future developmental course was indicated, and proposals were made on the equipment/system as object which are the subjects for urgent development for commercialization. (NEDO)

  15. International development of Japan's Nuclear Industry. Indispensable Japan-U.S. cooperation

    International Nuclear Information System (INIS)

    Saigo, Masao

    2006-01-01

    It is significant to internationally develop the nuclear power plants technology that has been fostered by Japan's nuclear industry. It is also important to work with taking the degree of development of nuclear power plants of the recipient country into consideration. ''Forum on International Development of Nuclear Industry'' organized by the Japan Atomic Industrial Forum, Inc. (JAIF) proposed it would be indispensable for a Japan's nuclear industry to establish a Japan-U.S. Cooperation with the support of Government in order to develop the nuclear technology internationally. In November 2005, the investigating team including utilities and nuclear industry visited U.S. and exchanged opinions on its possibility. Investigating results and their evaluation were described. (T.Tanaka)

  16. Literature Review: Theory and Application of In-Line Inspection Technologies for Oil and Gas Pipeline Girth Weld Defection

    Science.gov (United States)

    Feng, Qingshan; Li, Rui; Nie, Baohua; Liu, Shucong; Zhao, Lianyu; Zhang, Hong

    2016-01-01

    Girth weld cracking is one of the main failure modes in oil and gas pipelines; girth weld cracking inspection has great economic and social significance for the intrinsic safety of pipelines. This paper introduces the typical girth weld defects of oil and gas pipelines and the common nondestructive testing methods, and systematically generalizes the progress in the studies on technical principles, signal analysis, defect sizing method and inspection reliability, etc., of magnetic flux leakage (MFL) inspection, liquid ultrasonic inspection, electromagnetic acoustic transducer (EMAT) inspection and remote field eddy current (RFDC) inspection for oil and gas pipeline girth weld defects. Additionally, it introduces the new technologies for composite ultrasonic, laser ultrasonic, and magnetostriction inspection, and provides reference for development and application of oil and gas pipeline girth weld defect in-line inspection technology. PMID:28036016

  17. Electronics manufacturing and assembly in Japan

    Science.gov (United States)

    Kukowski, John A.; Boulton, William R.

    1995-02-01

    In the consumer electronics industry, precision processing technology is the basis for enhancing product functions and for minimizing components and end products. Throughout Japan, manufacturing technology is seen as critical to the production and assembly of advanced products. While its population has increased less than 30 percent over twenty-five years, Japan's gross national product has increase thirtyfold; this growth has resulted in large part from rapid replacement of manual operations with innovative, high-speed, large-scale, continuously running, complex machines that process a growing number of miniaturized components. The JTEC panel found that introduction of next-generation electronics products in Japan goes hand-in-hand with introduction of new and improved production equipment. In the panel's judgment, Japan's advanced process technologies and equipment development and its highly automated factories are crucial elements of its domination of the consumer electronics marketplace - and Japan's expertise in manufacturing consumer electronics products gives it potentially unapproachable process expertise in all electronics markets.

  18. Japan and LPG

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    About 20 million metric tonnes of Liquefied Petroleum Gases (LPG) are consumed each year in Japan, of which 14,5 million metric tonnes are imported from Saudi Arabia and United Arab Emirates. This paper presents LPG industry in Japan and gives informations on the present status: supply and demand, imports, market, distribution

  19. 31st August 2011 - Government of Japan R. Chubachi, Executive Member of the Council for Science and Technology Policy, Cabinet Office, Vice Chairman, Representative Corporate Executive Officer and Member of the Board, Sony Corporation, visiting the ATLAS experimental area with Former Collaboration Spokesperson P. Jenni and Senior physicist T. Kondo.

    CERN Multimedia

    Raphaël Piguet

    2011-01-01

    31st August 2011 - Government of Japan R. Chubachi, Executive Member of the Council for Science and Technology Policy, Cabinet Office, Vice Chairman, Representative Corporate Executive Officer and Member of the Board, Sony Corporation, visiting the ATLAS experimental area with Former Collaboration Spokesperson P. Jenni and Senior physicist T. Kondo.

  20. 19 September 2011 - Japan Science and Technology Agency President K. Kitazawa visiting the LHC superconducting magnet test hall with engineer M. Bajko; the ATLAS visitor centre with Collaboration Former Spokesperson P. Jenni and Senior Scientist T. Kondo; signing the guest book with Adviser R.Voss and Head of International Relations F. Pauss.

    CERN Multimedia

    2011-01-01

    19 September 2011 - Japan Science and Technology Agency President K. Kitazawa visiting the LHC superconducting magnet test hall with engineer M. Bajko; the ATLAS visitor centre with Collaboration Former Spokesperson P. Jenni and Senior Scientist T. Kondo; signing the guest book with Adviser R.Voss and Head of International Relations F. Pauss.

  1. New technologies for information retrieval to achieve situational awareness and higher patient safety in the surgical operating room: the MRI institutional approach and review of the literature.

    Science.gov (United States)

    Kranzfelder, Michael; Schneider, Armin; Gillen, Sonja; Feussner, Hubertus

    2011-03-01

    Technical progress in the operating room (OR) increases constantly, but advanced techniques for error prevention are lacking. It has been the vision to create intelligent OR systems ("autopilot") that not only collect intraoperative data but also interpret whether the course of the operation is normal or deviating from the schedule ("situation awareness"), to recommend the adequate next steps of the intervention, and to identify imminent risky situations. Recently introduced technologies in health care for real-time data acquisition (bar code, radiofrequency identification [RFID], voice and emotion recognition) may have the potential to meet these demands. This report aims to identify, based on the authors' institutional experience and a review of the literature (MEDLINE search 2000-2010), which technologies are currently most promising for providing the required data and to describe their fields of application and potential limitations. Retrieval of information on the functional state of the peripheral devices in the OR is technically feasible by continuous sensor-based data acquisition and online analysis. Using bar code technologies, automatic instrument identification seems conceivable, with information given about the actual part of the procedure and indication of any change in the routine workflow. The dynamics of human activities also comprise key information. A promising technology for continuous personnel tracking is data acquisition with RFID. Emotional data capture and analysis in the OR are difficult. Although technically feasible, nonverbal emotion recognition is difficult to assess. In contrast, emotion recognition by speech seems to be a promising technology for further workflow prediction. The presented technologies are a first step to achieving an increased situational awareness in the OR. However, workflow definition in surgery is feasible only if the procedure is standardized, the peculiarities of the individual patient are taken into account

  2. Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Part 2. Engineering technology for geological disposal

    International Nuclear Information System (INIS)

    1999-11-01

    Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the deep geological disposal concept for high-level radioactive wastes (HLW) in Japan. The present document, part 2 of the progress report, concerns engineering aspect with reference to Japanese geological disposal plan, according to which the vitrified HLW will be disposed of into a deep, stable rock mass with thick containers and surrounding buffer materials at the depth of several hundred meters. It discusses on multi-barrier systems consisting of a series of engineered and natural barriers that will isolate radioactive nuclides effectively and retard their migrations to the biosphere environment. Performance of repository components, including specifications of containers for vitrified HLW and their overpacks under design as well as buffer material such as Japanese bentonite to be placed in between are described referring also to such possible problems as corrosion arising from the supposed system. It also presents plans and designs for underground disposal facilities, and the presumed management of the underground facilities. (Ohno, S.)

  3. The Kids Are Alright – Or, Are They?: The Millennial Generation’s Technology Use and Intelligence – an Assessment of the Literature

    Directory of Open Access Journals (Sweden)

    Jennifer Horwath

    2009-12-01

    Full Text Available Abstract The Millennials (born between 1979 and 1988 have been described in the library and education literature as a unique generation who are more technologically advanced and of higher intelligence than preceding generations. They have also been described as being extremely adept at using Web 2.0 technologies and avid content creators on the Internet. Commentators in the literature suggest that libraries focus their energies on designing services that appeal to this technically sophisticated user group. The authors examine some of the statements made about this generation by leaders in the field of librarianship and education in light of actual data and studies and conclude that these assertions do not seem to be based on solid research. The authors find that the Millennial generation may not be as unique as described; their technical abilities and use of Web 2.0 tools do not seem to be so very different from those of people in older age groups. Also, research into IQ scores and brain development does not positively confirm that this generation is any more intelligent than people in previous generations. The paper concludes with recommendations for libraries and educational institutions that serve this generation. The authors suggest that librarians take a more critical approach when evaluating research about the Millennial generation. In addition, the authors recommend that libraries investigate the true nature of their users through focus groups, surveys, usability studies or other methods so that they can develop services that meet actual needs and abilities.

  4. Licensing and decommissioning of nuclear installations in Japan

    International Nuclear Information System (INIS)

    Shimoyama, Shunji.

    1986-01-01

    The present report discusses the current status of Japan's licensing system and legislation concerning reactor decommissioning operations. Besides Japan is working to promote worldwide nuclear safety research. However, developing nuclear safety regulations that are uniformely applicable is a difficult job due to big differences in geographical, political, economical, and technological conditions. (CW) [de

  5. Insights into software development in Japan

    Science.gov (United States)

    Duvall, Lorraine M.

    1992-01-01

    The interdependence of the U.S.-Japanese economies makes it imperative that we in the United States understand how business and technology developments take place in Japan. We can gain insight into these developments in software engineering by studying the context in which Japanese software is developed, the practices that are used, the problems encountered, the setting surrounding these problems, and the resolution of these problems. Context includes the technological and sociological characteristics of the software development environment, the software processes applied, personnel involved in the development process, and the corporate and social culture surrounding the development. Presented in this paper is a summary of results of a study that addresses these issues. Data for this study was collected during a three month visit to Japan where the author interviewed 20 software managers representing nine companies involved in developing software in Japan. These data are compared to similar data from the United States in which 12 managers from five companies were interviewed.

  6. Current trends in rehabilitation engineering in Japan.

    Science.gov (United States)

    Ohnabe, Hisaichi

    2006-01-01

    In 2005, the elderly generation comprised 20% of the Japanese population. This percentage will grow to approximately 30% in 2030, meaning that nearly one in three people in Japan will be 65 years of age or older. Japan is the first nation in the world to face this situation. This article uses the context of Japanese society to give an overview of the elderly and people with disabilities; the International Classification of Functioning, Disability, and Health model; rehabilitation engineering-related policy; and education. In addition, we examine how governmental programs and Japanese law regarding technical aids may evolve by 2030. Partner robots, intelligent powered wheelchairs, nursing robots, and other technologies are introduced as examples of rehabilitation engineering and assistive technology. We also discuss the volunteer activities of the Rehabilitation Engineering Society of Japan (RESJA) in response to the Asian tsunami disaster and the achievements of a group of students from a Japanese senior high school of industry.

  7. Photovoltaic electricity production in Japan

    International Nuclear Information System (INIS)

    Destruel, P.

    2009-01-01

    The author first recalls the early investment of Japan in the solar energy which gave a leadership position to this country. However, it has been recently over-taken by Germany and Spain in terms of installed power. The share of the different technologies for the manufacturing of photovoltaic panels (polycrystalline silicon, mono-crystalline silicon, amorphous silicon, copper-indium-selenium cells) of different sizes, is presented, together with the current measures which are aimed at giving a new boost to this sector. The author tries then to foresee the evolutions of this sector during the next years and in a longer term (market prospective evolutions, factory projects, power station projects)

  8. Korea-Japan Joint Research on Development of Seismic Capacity Evaluation and Enhancement Technology Considering Near-Fault Effect (Final Report)

    Energy Technology Data Exchange (ETDEWEB)

    Choun, Young Sun; Choi, In Kil; Kim, Min Kyu [KAERI, Daejeon (Korea, Republic of); Ohtori, Yasuki; Shiba, Yoshiaki; Nakajima, Masato [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    2006-12-15

    We compiled the results of the source analysis obtained under the collaboration research. Recent construction scheme for source modeling adopted in Japan is described, and strong-motion prediction is performed assuming the scenario earthquakes occurring in the Ulsan fault system, Korea. Finally Qs values beneath the Korean inland crust are estimated using strong-motion records in Korea from the 2005 Off West Fukuoka earthquake (M7.0). Probabilistic seismic hazard for four NPP sites in Korea are evaluated, in which the site specific attenuation equations with Index SA developed for NPP sites are adopted. Furthermore, the uniform hazard spectra for the four NPP sites in Korea are obtained by conducting the PSHA by using the attenuation equations with the index of response spectra and seismic source model cases with maximum weights. The supporting tools for seismic response analysis, the evaluation tool for evaluating annual probability of failure, and system analysis program were developed for the collaboration. The tools were verified with theoretical results, the results written in the reference document of EQESRA, and so forth. The system analysis program was applied for the investigation of the effect of improving the seismic capacity of equipment. We evaluated the annual probability of failure of isolated and non-isolated EDG at Younggwang NPP site as the results of the collaboration. The input ground motion for generating the seismic fragility curve was determined based on the seismic hazard analysis. It was found that the annual probability of failure of isolated EDG is lower than that of non-isolated EDG.

  9. EDGAR CO2 purity. Type and quantities of impurities related to CO2 point source and capture technology. A Literature study

    Energy Technology Data Exchange (ETDEWEB)

    Walspurger, S.; Van Dijk, H.A.J. [ECN Biomass and Energy Efficiency, Petten (Netherlands)

    2012-08-15

    Carbon capture and storage (CCS) is an important tool that will contribute significantly to CO2 emissions abatement both in power and industrial sectors. Capture technologies as well as transport and distribution infrastructure development need to be carried out to ensure efficient CO2 separation and safe transport to storage sites. This study aimed at identifying, and when possible quantifying, the impurities present in CO2 streams resulting from various CO2 capture plants, such that challenges in development of appropriate materials and cleaning technologies for future CCS infrastructure may be anticipated. In its first part, the study provides a description of the characteristics of the different CO2 capture technologies with respect to their response to different type and quantity of impurities, striving for describing realistic combinations of point sources and capture technologies. Composition of CO2 gaseous streams was found to be highly dependent upon the type of CO2 point source and the removal technology selected. In most of the capture processes, most impurities concentration may be minimised by fine tuning of process operation. However plant economics eventually govern the impurity level in the CO2 stream. For mature technologies such as absorption by chemical or physical solvents lower impurity levels were found to be theoretically quite low, but when energy spent for regeneration is lowered, or when second generation capture with lower energy requirement are considered, the impurity level in CO2 stream increases. Accordingly, the report also addresses the conditioning technologies that are available or need to be developed for removal of traces elements such as mercury, volatile compounds and other condensable and points at technologies to be developed, especially in the sulphur compounds removal from CO2. In its final part the report addresses the quantification of future specification and concludes based on literature study that pipeline

  10. FY 1997 Report on New Sunshine Project. International co-operative projects (Australia-Japan solar energy technology cooperation, etc); 1997 nendo kokusai kyoryoku jigyo. Nichigonado taiyo energy gijutsu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Described herein are the progresses, memorandum concluded for the new project, NEDO/MUERI project activities, among others, for, e.g., Australia-Japan solar energy technology co-operative project. The photovoltaic cell outdoor exposure test project has been progressing as expected in Australia since FY 1996. The test data have been collected for one year and analyzed successively. The second information exchange workshop is scheduled in June 1998 in Sydney for the thin-film, polycrystalline photovoltaic cell manufacturing technologies. The new type photovoltaic cell long-term exposure test project has been started in FY 1997 as the new project in Oman. The weather conditions of the test site are very severe, very high both in temperature and humidity. The new type photovoltaic cell modules, centered by the amorphous silicon, will be exposure-tested in the severe atmospheres, to verify long-term reliability of the photovoltaic cells. A total of 5 types of the modules are to be exposure-tested; 3 types of 6 amorphous silicon cells, one type of 2 CdS/CdTe cells, and one type of 2 thin-film polycrystalline cells. (NEDO)

  11. The lithium-ion accumulators in Japan

    International Nuclear Information System (INIS)

    Lazzari, O.

    2006-07-01

    This document takes stock on the different technologies of lithium based batteries developed in Japan as the materials used to produce their different elements. The today tendencies of the japanese researches are discussed. The applications of the lithium-ion are presented. A list of the main public and private laboratories in the domain and the research programs is provided. (A.L.B.)

  12. Japan’s National Interests in Taiwan

    Science.gov (United States)

    2013-06-01

    the existential recognition of the power asymmetry at the core of the issue. C. PRC POWER ASYMMETRY: “COMPREHENSIVE NATIONAL POWER” Dealing with a...technological strength. Japan needs a grand strategy consonant with its self-image as a humanistic , democratic and peaceful nation, and a strategy able

  13. Establishment of the Japan Atomic Energy Agency

    International Nuclear Information System (INIS)

    Okazaki, Toshio

    2006-01-01

    A goal of the 21. century is for society to pursue 'sustainable economic development and prosperous life by recycling resources', thus rejecting 'development based on the waste of resources'. For Japan, which has limited energy resources, it is important to secure safe, inexpensive, environmentally friendly energy resources having long-term availability. To contribute to long-term energy security and solve global environmental issues, and to create advanced competitive science and technology, the Japan Atomic Energy Agency (JAEA) was established by integrating the Japan Atomic Energy Research Institute (JAERI) and the Japan Nuclear Cycle Development Institute (JNC) in October 2005. JAEA is endeavoring to establish nuclear fuel cycles, to contribute to social improvement through hydrogen production initiated by atomic energy, and to pursue research and development of thermonuclear fusion and quantum beam technology. This paper reviews the main R and D activities of JAEA. The structure of the paper is the following: 1. Introduction; 2. Japan Atomic Energy Agency; 3. Efforts to Commercialize the Fast Reactor Cycle; 4. Monju Progress; 5. Geological Disposal of High-Level Radioactive Waste R and D; 6. High Temperature Gas-Cooled Reactor System R and D; 7. Fusion Research and Development; 8. LWR Spent Fuel Reprocessing Technology; 9. Quantum Beam Technologies; 10. Nuclear Safety Research and Regulatory Applications; 11. Basic Science and Engineering Research; 12. Contribution to the Enhanced International Nonproliferation Regimes; 13. Conclusions. To summarize, JAEA will promote the above R and D activities, addressing the following commitments: - On problems that atomic energy faces, we shall extend technical assistance in response to the government and the industrial sectors. - We shall produce technical options to attain political goals to secure medium to long-term stable energy supplies and to solve global environmental issues. - With the high potentials of atomic

  14. Kirishima, Japan Images

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The shield volcano consists of more than 20 eruptive centers over a 20 x 30 km area that also includes Japan's first national park. Sixty-nine eruptions have been...

  15. Thorium research activities in Japan

    International Nuclear Information System (INIS)

    Sasa, Toshinobu

    2015-01-01

    The nuclear energy policy in Japan is based on the Uranium-Plutonium fuel cycle with Light Water Reactors (LWR) and Fast Breeder Reactors (FBR). After the accident at Fukushima-Daiichi Nuclear Power Plant, the Japanese government recognizes the importance to ensure the flexibility for future nuclear power generation and then, it was specified in the latest Japanese strategic energy plan. Two research groups related to thorium fuelled nuclear systems and fuel cycle was set up in the Atomic Energy Society of Japan in 2013. One is a 'Research Committee on Nuclear Applications of Molten Salt'. The committee was established to discuss the current molten-salt technology including molten-salt cooled reactor, molten-salt fuelled reactor, accelerator driven system, fusion reactor blankets and dry reprocessing processes. Throughout two years discussion, the committee summarizes a current state of the art and issues of molten-salt application systems. Committee also discussed the handling technologies for molten-salt reactors especially in China and United Kingdom, issues of molten-salt application to fusion reactor, dry reprocessing of spent nuclear fuel, and non-nuclear application of molten-salt. Term of the committee will be extended for further research activities

  16. Laser precision microfabrication in Japan

    Science.gov (United States)

    Miyamoto, Isamu; Ooie, Toshihiko; Takeno, Shozui

    2000-11-01

    Electronic devices such as handy phones and micro computers have been rapidly expanding their market recent years due to their enhanced performance, down sizing and cost down. This has been realized by the innovation in the precision micro- fabrication technology of semiconductors and printed wiring circuit boards (PWB) where laser technologies such as lithography, drilling, trimming, welding and soldering play an important role. In phot lithography, for instance, KrF excimer lasers having a resolution of 0.18 micrometers has been used in production instead of mercury lamp. Laser drilling of PWB has been increased up to over 1000 holes per second, and approximately 800 laser drilling systems of PWB are expected to be delivered in the world market this year, and most of these laser processing systems are manufactured in Japan. Trend of laser micro-fabrication in Japanese industry is described along with recent topics of R&D, government supported project and future tasks of industrial laser precision micro-fabrication on the basis of the survey conducted by Japan laser Processing Society.

  17. Mobile Marketing in Japan

    OpenAIRE

    Noah H. N. Lynn; Paul D. Berger

    2014-01-01

    In this paper we describe the state of mobile marketing in Japan. We consider the various aspects of mobile marketing in Japan and what has led to the overwhelming adoption by Japanese youth, and to a degree Japanese society as a whole, of social media and associated activities. This growth of mobile marketing has dramatic, positive implications for marketing, in general, as well as for the sale of selected product classes. We also consider markers for suggesting what the future of mobile mar...

  18. In Defense of Japan

    Science.gov (United States)

    2018-01-03

    potential addition of F-35B STOVL aircraft to their Izumo class helicopter destroyers is a good example. Japan’s conduct during World War II remain locked ...antiwar and antinuclear identity . But after sixty years, Japan’s neighbors still see bayoneted babies. Relations between Japan and its former victims...and the world order Robert Cooper defines Japan as the lone post-modern country surrounded by states firmly locked into an earlier age and that if

  19. The use of quality-adjusted life-years in the economic evaluation of health technologies in Spain: a review of the 1990-2009 literature.

    Science.gov (United States)

    Rodriguez, José Manuel; Paz, Silvia; Lizan, Luis; Gonzalez, Paloma

    2011-06-01

    To appraise economic evaluations of health technologies that included quality-adjusted life-years (QALYs) as an outcome measure conducted over the past 20 years in Spain. A systematic review of the literature was conducted. Economic evaluations that included QALYs as an outcome measure, conducted in Spain and published between January 1990 and December 2009 were identified. Primary and gray literature sources were reviewed. A total of 60 articles and 4 health technology assessment reports were included. Key findings were 1) the vast majority of articles (77.1%) referred to therapeutic interventions; 2) 63.2% dealt with pharmaceutical products and much fewer with preventive strategies, medical devices, or diagnostic interventions; 3) most evaluations referred to cardiovascular- (19.8%), respiratory- (16.3%), and cancer- (13.0%) related processes; 4) 80.3% were based on a theoretical model, most commonly Markov models (71.4%); 5) 67.3% adopted the National Health System perspective; 6) information on the methods used to describe the health states was given in 45.1% of studies; 7) 40.3% used the EuroQoL-5D to elicit preferences, whereas 66.1% gave no details on the methods applied to determine patients' choices; 8) it was possible to state who completed the questionnaires in only 17.7% of studies; 9) 77.1% of the interventions assessed were below the €30,000/QALY suggested affordable threshold in Spain. An increasing number of economic evaluations using QALYs had been conducted. Most of them relied on theoretical models. Several methodological issues remain unsolved. Great disparity exists regarding the reporting of the methods used to determine health states and utility values. Copyright © 2011. Published by Elsevier Inc.

  20. Japan's telecommunications - New initiatives in space communications

    Science.gov (United States)

    Iida, T.

    1992-04-01

    Despite recent advances in optical transmission technology, intensive R&D work in the field of satellite communications is now being undertaken in Japan. It is believed that satellites offer advantages in several important areas, including wide coverage broadcasting, immediacy of service, suitability for the implementation of HDTV, and advantages in disaster communications and other social services. Here, some experimental projects in the field of satellite communications planned in Japan for the 1990s are summarized. In particular, attention is given to broadcast satellite development, intersatellite links, advanced mobile communication concepts, large antenna assembly experiment, small satellite R&D, and Pan-Pacific information network experiment.

  1. Japan. Superconductivity for Smart Grids

    Energy Technology Data Exchange (ETDEWEB)

    Hayakawa, K.

    2012-11-15

    Currently, many smart grid projects are running or planned worldwide. These aim at controlling the electricity supply more efficiently and more stably in a new power network system. In Japan, especially superconductivity technology development projects are carried out to contribute to the future smart grid. Japanese cable makers such as Sumitomo Electric and Furukawa Electric are leading in the production of high-temperature superconducting (HTS) power cables. The world's largest electric current and highest voltage superconductivity proving tests have been started this year. Big cities such as Tokyo will be expected to introduce the HTS power cables to reduce transport losses and to meet the increased electricity demand in the near future. Superconducting devices, HTS power cables, Superconducting Magnetic Energy Storage (SMES) and flywheels are the focus of new developments in cooperations between companies, universities and research institutes, funded by the Japanese research and development funding organization New Energy and Industrial Technology Development Organization (NEDO)

  2. JTEC panel on nuclear power in Japan. Final report

    International Nuclear Information System (INIS)

    Hansen, K.F.; Behnke, W.B.; Cousin, S.B.; Evans, E.A.; Olander, D.R.

    1990-10-01

    The report examines the status and direction of nuclear power-related research and development in Japan in six areas: the nuclear fuel cycle, nuclear materials, instrumentation and control technology, CAD/CAM, nuclear safety research, and nuclear plant construction. Overall findings suggest that the nuclear power industry in Japan is at an advanced state of development; in particular, Japan is now technologically self-sufficient. Long-term goals of the Japanese program include closure of the complete fuel cycle and pursuit of the liquid metal fast breeder reactor as the future base system

  3. Status of SCRF cavity and ADS development in Japan

    International Nuclear Information System (INIS)

    Yamamoto, Akira

    2011-01-01

    SCRF cavity technology has progressed with high-energy particle accelerator programs in Japan. It was first applied for TRISTAN program at KEK, in early 1980s, and it is expected to be a key technology to realize the next energy-frontier lepton collider such as ILC, and/or intensity-frontier proton accelerators hopefully to be realized in Japan. The JPARC project as a joint program between JAEA and KEK is scoping to realize ADS program with the linac upgrade using a superconducting cavity system, as a future program. The talk will cover an overview of the SCRF cavity development and the ADS development in Japan. (author)

  4. Military aspect of nuclear policy of Japan

    International Nuclear Information System (INIS)

    Fujita, Yuko

    2011-01-01

    Military aspect of nuclear policy of Japan was outlined. In 1952 Prime Minister Yoshida asked to prepare production of weapons for rearmament and to establish Science and Technology Agency such as to overcome lack of science research budget and inefficiency of research and cooperation. Kaya and Fushimi proposed establishment of Atomic Energy Commission as recommendation of Science Council of Japan. In 1954 Nakasone proposed budget for nuclear energy with yen 235 million to construct reactor. In 1955 Japanese delegation participated in international conference on peaceful use of nuclear energy at Geneva and nonpartisan members proposed Atomic Energy Basic Law, which limited the use of nuclear technology to peaceful purposes, ensured three principles - democratic methods, independent management, and transparency - as the basis of nuclear research and promoted international co-operation. In 1956 Atomic Energy Commission and Science and Technology Agency were established with other organizations under this law. According to internal report in the age of Prime Minister Sato, nuclear policy in Japan would be (1) no holding nuclear weapon for the time being, (2) maintaining economic and technical potential of nuclear weapon production and (3) considering no restraint for this policy whether Japan participated in NPT or not. Fuel cycle program of Monju reactor and reprocessing for power production seemed to be deployed corresponding to (3) above. Irradiated blanket of Monju reactor could be reprocessed to produce highly purified plutonium suited for nuclear bombs. (T. Tanaka)

  5. Fiscal 2000 survey report on rationalization project for international energy conservation, technological dissemination project for international energy conservation, and Green Helmet Project. Japan-China alternative energy seminar/waste disposal; 2000 nendo kokusai energy shiyo gorika nado taisaku jigyo, kokusai energy shohi koritsuka nado gijutsu fukyu jigyo, green helmet jigyo chosa hokokusho. Nicchu sekiyu daitai energy seminar haikibutsu shori

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    This paper explains the Japan-China alternative energy seminar (February 28 and March 1, 2001, at Beijing). The purpose of the seminar is to introduce systematic and three-dimensional or land/sea/air measures for waste disposal including recycling in Japan, to provide guidance of measures in improving recognition and methods for waste disposal in China, and also to contribute to the dissemination and promotion of a model project for effectively utilizing waste heat from rubbish incineration, a project being implemented in Harbin City now. The activities of NEDO were introduced, with emphasis placed on a model program, called Green Aid Project, for managing heat from waste incineration. On the subjects of sustainable development, urban environment, and energy, the policy of China's tenth five-year plan was demonstrated, and the treatment of wastes in China was also explained. The present state of waste processing in Japan was introduced, as was its maintenance of the facilities. Concerning Japan's waste processing technologies and characteristics of the equipment, there were presented non-incineration processing including crushing/separating, RDF, compost, methane fermentation, etc.; incineration plants; and each of the technologies such as combustion, exhaust gas, ash treatment, use of remaining heat, and gasification melting. (NEDO)

  6. Introduction of nuclear medicine research in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Inubushi, Masayuki [Kawasaki Medical School, Division of Nuclear Medicine, Department of Radiology, Kurashiki, Okayama (Japan); Higashi, Tatsuya [National Institutes of Quantum and Radiological Science and Technology, National Institute of Radiological Sciences, Chiba, Chiba (Japan); Kuji, Ichiei [Saitama Medical University International Medical Center, Department of Nuclear Medicine, Hidaka-shi, Saitama (Japan); Sakamoto, Setsu [Dokkyo University School of Medicine, PET Center, Mibu, Tochigi (Japan); Tashiro, Manabu [Tohoku University, Division of Cyclotron Nuclear Medicine, Cyclotron and Radioisotope Center, Sendai, Miyagi (Japan); Momose, Mitsuru [Tokyo Women' s Medical University, Department of Diagnostic Imaging and Nuclear Medicine, Tokyo (Japan)

    2016-12-15

    There were many interesting presentations of unique studies at the Annual Meeting of the Japanese Society of Nuclear Medicine, although there were fewer attendees from Europe than expected. These presentations included research on diseases that are more frequent in Japan and Asia than in Europe, synthesis of original radiopharmaceuticals, and development of imaging devices and methods with novel ideas especially by Japanese manufacturers. In this review, we introduce recent nuclear medicine research conducted in Japan in the five categories of Oncology, Neurology, Cardiology, Radiopharmaceuticals and Technology. It is our hope that this article will encourage the participation of researchers from all over the world, in particular from Europe, in scientific meetings on nuclear medicine held in Japan. (orig.)

  7. Survey and research for the enhancement of large-scale technology development 1. Japan's large-scale technology development and the effects; Ogata gijutsu kaihatsu suishin no tame no chosa kenkyu. 1. Nippon no daikibo gijutsu kaihatsu to sono koka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1981-03-01

    A survey is conducted into the effects of projects implemented under the large-scale industrial technology research and development system. In the development of 'ultraperformance computers,' each of the technologies is being widely utilized, and the data service system of Nippon Telegraph and Telephone Public Corporation and the large computer (HITAC8800) owe much for their success to the fruits of the development endeavor. In the development of the 'desulfurization technology,' the fruits are in use by Tokyo Electric Power Co., Inc., and Chubu Electric Power Co., Inc., incorporated into their desulfurization systems. Although there is no practical plant based on the 'great-depth remotely controlled submarine oil drilling rig,' yet oceanic technologies and control methods are being utilized in various fields. The 'seawater desalination and by-product utilization' technologies have enabled the establishment of technologies of the top level in the world thanks to the resultant manufacture of concrete evaporator and related technologies. Eleven plants have been completed utilizing the fruits of the development. In the field of 'electric vehicle,' there is no commercialization in progress due to problems in cost effectiveness though remarkable improvement has been achieved in terms of performance. Technologies about weight reduction, semiconductor devices, battery parts and components, etc., are being utilized in many fields. (NEDO)

  8. JTEC Panel report on electronic manufacturing and packaging in Japan

    Science.gov (United States)

    Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John; Meieran, Gene; Pecht, Michael; Peeples, John; Tummala, Rao; Dehaemer, Michael J.; Holdridge, Geoff (Editor); Gamota, George

    1995-01-01

    This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies.

  9. Middle term prospects for Japan's safeguards

    International Nuclear Information System (INIS)

    Ogawa, T.

    2001-01-01

    Japan has responded to IAEA requirements on reinforced safeguard regulations. The IAEA additional protocol entered in force in Japan on December 1999. Japan submitted a preliminary information report to IAEA on June 2000 after joint works with the Nuclear Material Control Center (NMCC) of Japan. The first annual report was submitted to IAEA on May 2001. Another activity for the additional protocol is complementary accesses. The total 36 accesses to facilities have been done from November 2000 to September 2001. Procedures of access to managements are under discussion. MEXT (Ministry of Education, Culture, Sports, Science and Technology) has been constructing the Rokkasho Safeguards On-Site Laboratory from 1997, and the Rokkasho Safeguards Center from 2000. The Design Information Verification (DIV) is now ongoing. Much more personal resources will be needed for future inspections. Therefore, the budget for safeguards is increasing in contrast to the flat base budget for the total atomic energy. As for future activity, a MOX (Mixed Oxide Fuels) fuel processing plant is one of the issues for discussion. The construction of the MOX processing plant is supposed to begin on around 2004. The conclusion of additional protocol will be given by IAEA until end of 2002. Shift to integrated safeguards are under discussions by MEXT, NMCC and utilities of Japan parallel with IAEA. Key issues of discussion are cost saving for safeguards, development of personal resources for inspectors and the role of NMCC. (Y. Tanaka)

  10. Japan steel mill perspective

    Energy Technology Data Exchange (ETDEWEB)

    Murase, K. [Kobe Steel Ltd., Tokyo (Japan)

    2004-07-01

    The international and Japan's steel industry, the coking coal market, and Japan's expectations from Canada's coal industry are discussed. Japan's steel mills are operating at full capacity. Crude steel production for the first half of 2004 was 55.8 million tons. The steel mills are profitable, but costs are high, and there are difficulties with procuring raw materials. Japan is trying to enhance the quality of coke, in order to achieve higher productivity in the production of pig iron. Economic growth is rising disproportionately in the BRICs (Brazil, Russia, India, and China), with a large increase in coking coal demand from China. On the supply side, there are several projects underway in Australia and Canada to increase production. These include new developments by Elk Valley Coal Corporation, Grande Cache Coal, Western Canadian Coal, and Northern Energy and Mining in Canada. The Elga Mine in the far eastern part of Russia is under development. But the market is expected to remain tight for some time. Japan envisions Canadian coal producers will provide a stable coal supply, expansion of production and infrastructure capabilities, and stabilization of price. 16 slides/overheads are included.

  11. International Collaboration on bio-hydrogen R and D. Report for the Research Institute of Innovative Technology for the Earth (RITE), Tokyo, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Huesing, B.

    1998-01-01

    In order to solve the problem of the foreseeable depletion of fossil energy resources and of expected global climatic changes due to the emission of greenhouse gases future energy systems are required which meet the growing world energy demand but do not depend on fossil fuels. One possible option which is discussed as a clean and environmentally friendly energy source for the 21{sup st} century is the conversion of solar energy into hydrogen. Hydrogen as an environmentally friendly energy source can also be an integral part of a zero-emission economy because it can contribute to the minimization of toxic dispersion (especially the greenhouse gas CO{sub 2}) and to the maximization of sustainable use of renewable resources. It has been known for more than 50 years that certain living organisms are able to produce hydrogen. Biological hydrogen production has several comparative advantages over competing hydrogen production technologies such as photovoltaic or solarthermic electricity generation plus water hydrolysis. These advantages are - simpler systems: hydrogen production from direct water splitting without involvement of electricity/electrolysis, - self-regenerating systems, - biologically degradable systems: disposal can be coupled to the production of additional value-added substances, - flexible systems: production organisms can adapt to changing environmental conditions, - versatile systems: production organisms which are tailor-made to special environmental conditions can be selected. (orig.)

  12. Mapping the Literature

    DEFF Research Database (Denmark)

    Boulus-Rødje, Nina

    2012-01-01

    As the utilization of various e-voting technologies has notably increased in the past few years, so has the amount of publications on experiences with these technologies. This article, will, therefore map the literature while highlighting some of the important topics discussed within the field of e...

  13. Japan's nuclear juggernaut

    International Nuclear Information System (INIS)

    Richner, S.

    1984-01-01

    A summary of nuclear energy in Japan is presented. Nuclear energy provides 17% of Japan's electricity but could provide much more. 25 more reactors (to add to the existing 27) are planned by 1995. The cooperation between Japanese government and industry and the economic assistance in building new plants means that these are not likely to be cancelled. Public acceptance of new plants has often been obtained by large cash employment inducements. Now, however, there is growing disillusionment when short-term well paid employment building the reactors is followed by unemployment when the reactor is in operation. Also there is a growing opposition to the storage of the nuclear waste. To maintain the growth of its nuclear industry Japan needs to export to provide a steady flow of big orders. (U.K.)

  14. Fiscal 1997 report on the model project for the effective energy consumption in developing countries. Survey of changes of energy conservation technology and environmental protection technology in the oil refining industry in Japan; 1997 nendo chosa hokokusho. Hatten tojokoku energy shohi koritsuka model jigyo (Nippon sekiyu seiseigyo ni okeru sho energy gijutsu to kankyo taisaku gijutsu no hensen chosa hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For global scale measures to be taken for environmental protection, it becomes more and more important in the future to positively transfer and spread energy conservation technologies of Japan to overseas countries. Especially, it is effective for both economic growth in the Asian region and global environmental protection to transfer technologies which the oil refining industry has been developing and accumulating. Energy conservation in the oil refining industry means the energy conservation by strengthening the operational control at the first and second oil crises in the first stage, the energy conservation in the second stage which was accompanied by small and medium scale plant/equipment investments during several years after the first stage, and the energy conservation in the third stage which was accompanied by large scale investments from the first half of the 1980s to the present, resulting in improvement of 40% over before the first oil crisis. As to environmental protection measures, measures to reduce waste from oil refinery against air pollution and water pollution were prepared by the first half of the 1970s, and technologies were established of waste water treatment, flue gas desulfurization and denitrification. A lot of facilities for improvement of product quality and for low pollution were installed. In addition to environmental technologies, also in other industries, there were seen the heightening of thermal efficiency of kiln and thermal efficiency of cooling technique of clinker cooler in the cement industry and the improvement of productivity in the paper/pulp industry. 360 figs., 62 tabs.

  15. Development of nuclear powered ship in Japan

    International Nuclear Information System (INIS)

    Sato, Hiroshi

    1976-01-01

    The development of nuclear merchant ship in Japan was started in 1955 by the establishment of Nuclear Ship Study Group, and since then, the investigation, test and research on nuclear ships have been continued. As a result, a nuclear ocean observation and supply ship was designed for trial. Researches were carried out also in JAERI and Institute for Technical Research of Ships. Meanwhile, the nuclear icebreaker Lenin was completed in Soviet Union in 1959, the nuclear ship Savannah set out for maiden voyage in U.S. in 1962, and the construction of the nuclear ore carrier Otto Hahn was prepared in FRG. Japan Nuclear Ship Development Corp. was established in 1963, and started the design and construction of the first nuclear ship in Japan, Mutsu. The basic policy in the construction is the improvement of nuclear ship technology, the securing of safety, and the use of domestic technologies as far as possible. The progress of the design, construction and test of the Mutsu is described. Owing to the problem of radiation leak, the development of nuclear ships stagnated for a while, but the nuclear plant of the Mutsu demonstrated the expected performance in the functional test, land criticality test and zero output test, and it is expected that the bud of the independent development brought up so far can bear valuable fruit. The independent development of marine nuclear reactors should be continued by selecting the way most suitable to Japan. (Kako, I.)

  16. U.S.-Japan Quake Prediction Research

    Science.gov (United States)

    Kisslinger, Carl; Mikumo, Takeshi; Kanamori, Hiroo

    For the seventh time since 1964, a seminar on earthquake prediction has been convened under the U.S.-Japan Cooperation in Science Program. The purpose of the seminar was to provide an opportunity for researchers from the two countries to share recent progress and future plans in the continuing effort to develop the scientific basis for predicting earthquakes and practical means for implementing prediction technology as it emerges. Thirty-six contributors, 15 from Japan and 21 from the U.S., met in Morro Bay, Calif.September 12-14. The following day they traveled to nearby sections of the San Andreas fault, including the site of the Parkfield prediction experiment. The conveners of the seminar were Hiroo Kanamori, Seismological Laboratory, California Institute of Technology (Caltech), for the U.S., and Takeshi Mikumo, Disaster Prevention Research Institute, Kyoto University, for Japan . Funding for the participants came from the U.S. National Science Foundation and the Japan Society forthe Promotion of Science, supplemented by other agencies in both countries.

  17. Food irradiation development in Japan

    International Nuclear Information System (INIS)

    Kawabata, T.

    1981-01-01

    In Japan, the first food irradiation research was carried out on the preservation of fish and fishery products. In 1966, the Atomic Energy Commission of the Japanese Government (JAEC) decided to promote the National Project on Food Irradiation and, in 1967, the Steering Committee on food irradiation research in the Atomic Energy Bureau, Science and Technology Agency, selected the following food items as of economic importance to the country, i.e., potatoes, onions, rice, wheat, ''Vienna'' sausage, ''kamaboko'' (fish meat jelly products) and mandarin oranges. The National Project is expected to finish at the end of the 1981 fiscal year. Based on the studies by the National Project, irradiated potatoes were given ''unconditional acceptance'' for human consumption in 1972. Already in 1973, a commercial potato irradiator was built at Shihoro, Hokkaido. In 1980, the Steering Committee submitted a final report on the effectiveness and wholesomeness studies on irradiated onions to the JAEC. This paper gives a brief explanation of the legal aspects of food irradiation in Japan, and the present status of wholesomeness studies on the seven items of irradiated foods. In addition, topics concerning food irradiation research on ''kamaboko'', especially on the effectiveness and a new detecting method for the irradiation treatment of these products, are outlined. (author)

  18. Current status of SFR development in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Ieda, Yoshiaki; Chikazawa, Yoshitaka [Japan Atomic Energy Agency, Tokyo (Japan). Project Promotion Office; Kotake, Shoji [Japan Atomic Power Company, Tokyo (Japan)

    2012-03-15

    Fast Reactor development experiences and status in Japan are summarized. Even though international SFR circumstances were against in 1980s and 1990s, e.g. CRBRP, SNR-300 and Superphenix terminations, we kept on with our R and D activities steadily aiming at positive development targets in Japan. As results of our efforts, it has shown that our commercialized SFR concept, Japan Sodium-cooled Fast Reactor (JSFR) could meet the targets in the Feasibility Study on Commercialized Fast Reactor Cycle Systems (FS) and the Fast Reactor Cycle Technology Development (FaCT) project. Further, Monju has finally achieved restart in May 2010 after having been shut for almost 15 years. A future plan of Monju is to be determined based on a direction of the national nuclear and energy policies that will be established in 2012. The undergoing FaCT project is pursuing commercialization of fast reactor cycle system around 2050 under cooperation of MEXT (Ministry of Education, Culture, Sports, Science and Technology), METI (Ministry of Economy, Trade and Industry), utilities, venders and JAEA (Japan Atomic Energy Agency). As results of the FaCT Phase I, feasibility of the key technologies for JSFR has been evaluated and the project is waiting for launching the phase II due to the Tohoku large earthquake. It is considered that the nuclear development policy might be affected by the Tohoku large Earthquake/Tsunami in Japan. Nevertheless the significance of nuclear energy will not be changed and thus we will focus on the issues learnt from Fukushima accidents and reflect into the improvement of the safety of Monju and the safety design criteria for the next generation Fast Reactor systems. (orig.)

  19. Current status of SFR development in Japan

    International Nuclear Information System (INIS)

    Ieda, Yoshiaki; Chikazawa, Yoshitaka

    2012-01-01

    Fast Reactor development experiences and status in Japan are summarized. Even though international SFR circumstances were against in 1980s and 1990s, e.g. CRBRP, SNR-300 and Superphenix terminations, we kept on with our R and D activities steadily aiming at positive development targets in Japan. As results of our efforts, it has shown that our commercialized SFR concept, Japan Sodium-cooled Fast Reactor (JSFR) could meet the targets in the Feasibility Study on Commercialized Fast Reactor Cycle Systems (FS) and the Fast Reactor Cycle Technology Development (FaCT) project. Further, Monju has finally achieved restart in May 2010 after having been shut for almost 15 years. A future plan of Monju is to be determined based on a direction of the national nuclear and energy policies that will be established in 2012. The undergoing FaCT project is pursuing commercialization of fast reactor cycle system around 2050 under cooperation of MEXT (Ministry of Education, Culture, Sports, Science and Technology), METI (Ministry of Economy, Trade and Industry), utilities, venders and JAEA (Japan Atomic Energy Agency). As results of the FaCT Phase I, feasibility of the key technologies for JSFR has been evaluated and the project is waiting for launching the phase II due to the Tohoku large earthquake. It is considered that the nuclear development policy might be affected by the Tohoku large Earthquake/Tsunami in Japan. Nevertheless the significance of nuclear energy will not be changed and thus we will focus on the issues learnt from Fukushima accidents and reflect into the improvement of the safety of Monju and the safety design criteria for the next generation Fast Reactor systems. (orig.)

  20. Divorce in contemporary Japan.

    Science.gov (United States)

    Fukurai, H; Alston, J

    1990-10-01

    Data from the 1985-86 Japanese census are analysed to explore the determinants of the divorce rates in Japan's forty-seven prefectures, using two theoretical models: (a) the social integration model, which is shown to have a greater utility in predicting Japanese divorce levels than (b), the human capital model. Female emigration patterns play a significant role in affecting the divorce rate. Population increase and net household income are also important predictors of the Japanese divorce rate and urbanization has a great influence in modern Japan. Demographic and aggregate variables such as migration, urbanization, and socioeconomic factors are useful when organized under a social integration model.

  1. Establishment of 'Japan Atomic Energy Agency'. Its role and expectation

    International Nuclear Information System (INIS)

    Nakahara, Toru; Itakura, Shuichiro; Shiozawa, Shusaku; Hino, Ryutaro; Fujii, Yasuhiko; Sakurada, Michio; Kimura, Itsuro; Kikuyama, Kaoru

    2005-01-01

    In October 2005, the Japan Atomic Energy Agency (JAEA) was established as an independent administrative institution with the integration of the Japan Atomic Energy Research Institute (JAERI) and the Japan Nuclear Cycle Development Institute (JNC). JAEA is the only institute in Japan dedicated to comprehensive research and development in the field of nuclear energy. This paper put together a special article on its role and expectation. Firstly the essentials of comprehensive nuclear research and its future perspective were discussed mainly based on 'Framework for Nuclear Energy Policy' of the Atomic Energy Commission of Japan. Eight articles were followed on specific items such as quantum beams utilization, hydrogen production with nuclear heat, neutron science and ITER project, and put stress on joint works and smooth transfer of related technology to the private sector. (T. Tanaka)

  2. Language Testing in Japan.

    Science.gov (United States)

    Brown, James Dean, Ed.; Yamashita, Sayoko Okada, Ed.

    Papers on second language testing in Japan include: "Differences Between Norm-Referenced and Criterion-Referenced Tests" (James Dean Brown); "Criterion-Referenced Test Construction and Evaluation" (Dale T. Griffe); "Behavioral Learning Objectives as an Evaluation Tool" (Judith A. Johnson); "Developing Norm-…

  3. Dutch surgery in Japan

    NARCIS (Netherlands)

    van Gulik, Thomas M.; Nimura, Yuji

    2005-01-01

    An isolation policy was adopted in feudal Japan from 1639 to 1853 owing to the fear of foreign influence. During those 200 years of isolation, all foreigners were withheld from the country with the exception of the Dutch, who were permitted to establish a trading post on a small island in the Bay of

  4. Globalization in Japan

    DEFF Research Database (Denmark)

    Roesgaard, Marie Højlund

    2014-01-01

    Abstract for Nichibunken Copenhagen Symposium August 2012 Globalization in Japan – the case of moral education. 日本とグローバル化 - 道徳教育の件 Marie H. Roesgaard, Department of Cross-Cultural and Regional Studies, University of Copenhagen. This paper attempts to trace the history of global influence on Japan......Abstract for Nichibunken Copenhagen Symposium August 2012 Globalization in Japan – the case of moral education. 日本とグローバル化 - 道徳教育の件 Marie H. Roesgaard, Department of Cross-Cultural and Regional Studies, University of Copenhagen. This paper attempts to trace the history of global influence...... adjusting to those of the global currents that cannot be ignored. Further, I would suggest that global, or at least Western, influence is not a new thing in regard to moral education in Japan. The paper will provide an historical overview of the development of moral education since Meiji times and focus...

  5. China, South Korea, Japan

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    Intended for Canadian readers, this popular account was suggested by the Sixth Pacific Basin Nuclear Conference. Economic, political, geographic, sociological and historical aspects of the nuclear programmes of China, South Korea and Japan are discussed. The importance of past, present and future Canadian nuclear trade with the area is indicated

  6. Japan's plutonium economy

    International Nuclear Information System (INIS)

    Hecht, M.M.

    1994-01-01

    Japan's plutonium economy is based on the most efficient use of nuclear energy, as envisioned under the Atoms for Peace program of the 1950s and 1960s. The nuclear pioneers assumed that all nations would want to take full advantage of atomic energy, recycling waste into new fuel to derive as much energy as possible from this resource

  7. Nuclear power development in Japan

    International Nuclear Information System (INIS)

    Sugawara, A.

    1994-01-01

    Energy situation in Japan and Japan's strategy for stable supply of energy are discussed. Benefits of nuclear power in comparison with other energy sources is considered. History of nuclear power development in Japan, modern status and future trends are described. 6 figs

  8. China's air pollution and Japan's response to it

    International Nuclear Information System (INIS)

    Matsuura, S.

    1995-01-01

    Long-range transport of air pollutants has been a serious global environment problem. Japan's Central Research Institute of Electric Power Industry (CRIEPI) researchers are investigating the possibility of acid rain from China. So far, the acid rain that has appeared in Japan has not had a significant effect. However, because of the high economic growth projected for the coming years in China, acidic fallout from that country is likely to cause serious damage there and in Japan as well. China is one of the largest coal users in the world. One of the biggest factors making air quality worse is the lack of appropriate technologies. Although Japanese desulfurization technologies are well advanced, they cannot be directly applied to stationary pollution sources in China, because of their cost. Japan has sophisticated technologies, but lacks experience in and knowledge of alternative, intermediate, and low-technology solutions. Given this, Japan may attempt to buy pollution control technology equipment from the United States, which provides a wider range of desulfurization technologies, as a part of the Official Development Assistance program. At the same time, international support that includes the establishment of additional global environmental monitoring stations in China are also necessary

  9. From sword to chrysanthemum: Japan's culture of anti-miltarism

    International Nuclear Information System (INIS)

    Berger, T.U.

    1993-01-01

    The end of the Cold War and the phenomenal increase in Japan's economic and technological power put Japan today in the position to become, if it chooses, a military as well as economic superpower. The diminution of the Soviet threat and the increasing US preoccupation with domestic problems give Japan a latitude for independent action it has not had since the end of World War II. At the same time the US-Japanese security alliance, which has enabled Japan to adopt a minimalist approach to defense and national security, is being weakened by ideologically charged trade and other economic frictions and a growing American perception of Japan as a threat to its interests. Moreover, in the long run Japan faces the prospect of having to deal with other rising regional powers, most notably the People's Republic of China. This changing international security environment thus raises question whether Japan, having become an economic rival of the United States, may not in the future become a military competitor as well; whether, after having adopted a pacifist stance for half a century, Japan may choose to unsheathe its sword once again

  10. History and structure of Japan-US nuclear alliance

    International Nuclear Information System (INIS)

    Yoshioka, Hitoshi

    2011-01-01

    'Japan-US nuclear alliance' for civil use of nuclear energy was used here as technical term for the state Japanese commercial power plants were all water-cooled reactors under the US nuclear engineering umbrella and US admitted Japanese development of all 'SNT: sensitive nuclear technology' in the area of nuclear fuel cycle. 'Japan-US alliance' was used for various areas closely related with national security while 'Japan-US nuclear weapon alliance' was for military use of nuclear energy such as nuclear weapon (transport methods included) and counter weapon system. Military and civil use of nuclear energy relied fundamentally on common technical bases and especially nuclear fuel cycle related technologies were directly connected to both uses and called 'SNT'. Japanese nuclear policy sticking to SNT might come from the axiom: nuclear engineering for national security, that meant Japan refrained from nuclear arms but maintained technical and industrial potential of nuclear arms. This could be called 'nuclear arms standby strategy' and derived from compromise of both countries to play role of stabilizer of 'Japan-US alliance'. History of Japanese nuclear power development could be well understood as formation process of 'Japan-US nuclear alliance'. If Fukushima Daiichi accident forced nuclear power to phase out, nuclear fuel cycle would be obliged to terminate. This meant failure of the axiom and dissolution of 'Japan-US nuclear alliance'. (T. Tanaka)

  11. Current status of VHTR development in Japan

    International Nuclear Information System (INIS)

    Aochi, A.; Kondo, T.

    1982-01-01

    The status of the program at the beginning of fiscal 1982 is reviewed. Special emphasis is placed on the altering of the output helium temperature of the experimental VHTR to 950 0 . The modification is aimed at establishing the technical basis for post-experimental VHTR output helium temperature of 1000 0 C. Notes are given on the design of the VHTR as well as various research and development efforts in Japan on multi-purpose nuclear heat applications and HTGR technology

  12. What is nuclear power in Japan?

    Science.gov (United States)

    Suzuki, Toshikazu

    2011-03-01

    The aggressive use of such non-fossil energy as the atomic energy with high power density and energy production efficiency is an indispensable choice aiming at the low-carbon society. There is a trial calculation that the carbon dioxide emission of 40000 ton can be suppressed by nuclear power generation by one ton of uranium. The basis of nuclear research after the Second World War in Japan was established by the researchers learnt in Argonne National Laboratory. In 2010, NPPs under operation are 54 units and the total electric generating power is 48.85GW. The amount of nuclear power generation per person of the people is 0.38kW in Japan, and it is near 0.34kW of the United States. However, the TMI accident and the Chernobyl disaster should have greatly stagnated the nuclear industry of Japan although it is not more serious than the United States. A lot of Japanese unconsciously associate a nuclear accident with the atomic bomb. According to the investigation which Science and Technology Agency carried out to the specialist in 1999, ``What will be the field where talent should be emphatically sent in the future?'' the rank of nuclear technology was the lowest in 32 fields. The influence of the nuclear industry stagnation was remarkable in the education. The subject related to the atomic energy of a university existed 19 in 1985 that was the previous year of the Chernobyl disaster decreased to 7 in 2003. In such a situation, we have to rely on the atomic energy because Japan depends for 96% of energy resources on import. The development of the fuel reprocessing and the fast breeder reactor has been continued in spite of a heavy failure. That is the only means left behind for Japan to be released from both fossil fuel and carbon dioxide.

  13. Concept and development of information flow diagram for literature survey

    International Nuclear Information System (INIS)

    Noda, Masaru; Sato, Shoko; Ueda, Tadashi; Tsuchi, Hiroyuki; Koike, Akihisa

    2007-01-01

    The Information Flow Diagram for Literature Survey (IFDLS) has been developed to manage information and procedure in the literature survey phase of the PTAs selection process. It is a tool utilizing information technology, which can organize, analyze, and evaluate information from literature survey and manage their process systematically. IFDLS is able to show the flow of information and data, and the history of information management processing. Information coverage and quality is not homogenous throughout the country and, in some areas, there may not even be sufficient data available to be able to reach a judgment on conformity with the site-specific evaluation factors (SSEF). Literature surveys could only be conducted on a volunteer area before it is nominated as a PIA. However, the absence of information on any factor mentioned will not constitute disqualification of the area. On the contrary, an attempt to compare these sites with analogous areas in Japan will be done to assemble sufficient data and consequently make a decision on whether to proceed further. The application of IFDLS to literature survey phase of the PIA selection process is being proposed. The concept, construction, application and evolution of IFDLS towards application phase on a trial basis are discussed. (authors)

  14. Evaluating Quality of Decision-Making Processes in Medicines' Development, Regulatory Review, and Health Technology Assessment: A Systematic Review of the Literature.

    Science.gov (United States)

    Bujar, Magdalena; McAuslane, Neil; Walker, Stuart R; Salek, Sam

    2017-01-01

    Introduction: Although pharmaceutical companies, regulatory authorities, and health technology assessment (HTA) agencies have been increasingly using decision-making frameworks, it is not certain whether these enable better quality decision making. This could be addressed by formally evaluating the quality of decision-making process within those organizations. The aim of this literature review was to identify current techniques (tools, questionnaires, surveys, and studies) for measuring the quality of the decision-making process across the three stakeholders. Methods: Using MEDLINE, Web of Knowledge, and other Internet-based search engines, a literature review was performed to systematically identify techniques for assessing quality of decision making in medicines development, regulatory review, and HTA. A structured search was applied using key words and a secondary review was carried out. In addition, the measurement properties of each technique were assessed and compared. Ten Quality Decision-Making Practices (QDMPs) developed previously were then used as a framework for the evaluation of techniques identified in the review. Due to the variation in studies identified, meta-analysis was inappropriate. Results: This review identified 13 techniques, where 7 were developed specifically to assess decision making in medicines' development, regulatory review, or HTA; 2 examined corporate decision making, and 4 general decision making. Regarding how closely each technique conformed to the 10 QDMPs, the 13 techniques assessed a median of 6 QDMPs, with a mode of 3 QDMPs. Only 2 techniques evaluated all 10 QDMPs, namely the Organizational IQ and the Quality of Decision Making Orientation Scheme (QoDoS), of which only one technique, QoDoS could be applied to assess decision making of both individuals and organizations, and it possessed generalizability to capture issues relevant to companies as well as regulatory authorities. Conclusion: This review confirmed a general

  15. Review of Research of Media Education in Japan

    OpenAIRE

    丸山, 裕輔; Maruyama, Yusuke

    2005-01-01

    The purpose of this study is to review research of media education in Japan. As new information technologies: digital media typified personal computer or internet, spread into homes and schools, new types of media literacy are necessary. The problem, which arises here, is what the content of this new media literacy is. This problem still remains unclear. Then the author studied research of media education in Japan using the following points. These include: 1) studies on the structure of visua...

  16. Asian Development Bank–Japan Scholarship Program: Annual Report 2011

    OpenAIRE

    Asian Development Bank (ADB); Asian Development Bank (ADB); Asian Development Bank (ADB); Asian Development Bank (ADB)

    2012-01-01

    The Japan Scholarship Program (JSP) was established in 1988 to provide well-qualified citizens of developing member countries an opportunity to undertake postgraduate studies in economics, management, science and technology, and other development-related fields at 27 educational institutions in 10 countries in Asia and the Pacific. Between 1988 and 2011, Japan contributed more than $126 million to the JSP. A total of 2,818 scholarships have been awarded to recipients from 35 member countries,...

  17. Asian Development Bank–Japan Scholarship Program: Annual Report 2010

    OpenAIRE

    Asian Development Bank (ADB); Asian Development Bank (ADB); Asian Development Bank (ADB); Asian Development Bank (ADB)

    2011-01-01

    The Japan Scholarship Program (JSP) was established in 1988 to provide well-qualified citizens of developing member countries an opportunity to undertake postgraduate studies in economics, management, science and technology, and other development-related fields at 27 educational institutions in 10 countries in Asia and the Pacific. Between 1988 and 2010, Japan contributed more than $116 million to the JSP. A total of 2,695 scholarships have been awarded to recipients from 35 member countries,...

  18. Neuropsychology in Japan: history, current challenges, and future prospects.

    Science.gov (United States)

    Sakamoto, Maiko

    2016-11-01

    The purpose of this special issue was to describe the cross-cultural differences in neuropsychology throughout the world. The current state of neuropsychology in Japan is discussed in this manuscript. Information on six topics, including (1) the history of Japanese neuropsychology, (2) licensure system, (3) job opportunities, (4) neuropsychological clinical services, (5) neuropsychological tests, and (6) neuropsychological research, was gathered via literature searches, official organization websites, and personal communication with clinical psychologists and other professionals in Japan. Neuropsychology reached Japan from the west in the late 1800s, a period of rapid political and social modernization. Professional associations were founded in the 1960s and 1970s and continued to grow. The need for neuropsychological assessment in Japan is growing; however, credential requirements for neuropsychologists have not yet been established. To practice clinical psychology in Japan, one must obtain a Master's degree and pass a licensure examination that is administered by a private professional foundation. Clinical psychologists often conduct neuropsychological tests; however, they have little training in neuropsychological assessment. While many western neuropsychological tests have been translated into Japanese and are used in clinical settings, the majority of translated tests have not been standardized and their psychometric properties remain poorly understood. Standardization and development of normative data in Japan is warranted. Given that needs for neuropsychological services are increasing, it is essential for clinical psychologists in Japan to improve their skills in neuropsychological evaluations. Japanese graduate schools must work to establish neuropsychology programs to educate and train clinical neuropsychologists.

  19. FY 2000 report on the survey of long-term energy technology strategy, etc. - Fundamental survey to work out the industrial technology strategy. Research survey on analysis of trends of technical innovation in Japan/Europe/the U.S.; 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiso chosa (Nichibeio no gijutsu kakushin doko no bunseki ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For survey of the industrial competitive force, it is important to arrange the environment where the continuous and spontaneous technical innovation is generated. To recognize the present situation, the patent information relating to technical innovation, etc. were collected, indices of the number of patent, degree of the reference and scientific link in Japan, the U.S., and Europe were taken out by technology field to analyze the patent trend in the past 10 years. By technology field, the U.S. is superior in a lot of fields. Japan is at top rank in office supplies and camera fields, made strenuous efforts in automobile and semiconductor/electronic fields, but is behind others in medicine, biotechnology and aerospace fields. Concerning the number of patent registration in the U.S., Japan is superior to the U.S. in automobile/electric equipment/metal industries. Europe is superior in food and engineering fields. The U.S. is superior in aerospace industry and biotechnology fields. The U.S. is featured by a large number of patent applications by universities and government organizations. (NEDO)

  20. Investigations of food irradiation technology in Japan

    International Nuclear Information System (INIS)

    2009-01-01

    All Nippon Spice Assoc. (ANSA) requested the approval in the Ministry of Health Labour and Welfare (MHLW) of radiation irradiation of their products for sterilization and pesticide in 2000. Problems of food irradiation (FI) which started from this ANSA request have been investigated by concerned Japanese administrations and associations with reference to trends in foreign countries, and of which outline till Aug., 2009 is described in this paper. On ANSA petition, AEC (Atomic Energy Committee) required the investigation of the safety problem in FI as it matched AEC policy and there have been background problems of Japanese people who have been having refusal response to radiation themselves. In 2003, Food Safety Committee (FSC) started, and AEC radiation expert committee investigated the trend and detection methodology of irradiated foods. Next year, FSC approved the irradiation of potato to prevent budding; MHLW began to study the detection methodology; and AEC mentioned to consider the FI problem in the Cabinet meeting and set up its expert committee (2005). MHLW reported the above decision in Councils of food/drug and of food hygiene (2006), published the methodology (thermoluminescence method) and started to monitor spices; and FSC discussed about FI problems with World Health Organization (WHO) experts (2007). During these years, the administrations trusted various investigations like foreign trends, safety and assessment of FI. In 2009, MHLW published results of their trusted investigations, based on which food hygienic and standardization sections began to investigate the problems; and FSC, the toxicity study of alkylcyclobutanone. During the period later than 2007, not only spices but also other foods like dried vegetables, tea, certain farm and marine products have been subject to monitoring (MHLW). Thus, MHLW has taken a leading role in actual approval of irradiated potato and in monitoring of imported foods. (K.T.)

  1. APWR - Mitsubishi, Japan/Westinghouse, USA

    International Nuclear Information System (INIS)

    Aeba, Y.; Weiss, E.H.

    1999-01-01

    Nuclear power generated by light water reactors accounts for approximately 1/3 of Japan's power supply. Development of the Advanced Pressurized Water Reactor (APWR) was initiated by five PWR electric power companies (Hokkaido, Kansai, Shikoku, Kyushu and Japan Atomic Power), Mitsubishi Heavy Industries, and Westinghouse, with a view to providing a nuclear power source to meet future energy demand in Japan. The APWR was developed based on the results of the Improvement and Standardization Program, promoted by the Ministry of International Trade and Industry, with reconsideration of the needs of age, such as construction cost reduction, enhanced safety and increased reliability. One of the important concepts of the APWR is its large power rating that decreases the construction cost per unit of electric generation capacity. Though the electric output was lower at the early stage of basic design than it is now, uprating to approximately 1530 MW is achieved based on the results of design progress and high efficiency improvements to the steam turbine and reactor coolant pumps. Furthermore, the APWR remarkably enhances reliability, safety operability and maintainability by introducing new technologies that include a radial reflector and advanced accumulators. The first APWR is planned to be built at Tsuruga No. 3 and No. 4 by the Japan Atomic Power Company and will be the largest commercial operation plant in the early 21st century. (author)

  2. Solid state ionics: a Japan perspective

    Science.gov (United States)

    Yamamoto, Osamu

    2017-12-01

    The 70-year history of scientific endeavor of solid state ionics research in Japan is reviewed to show the contribution of Japanese scientists to the basic science of solid state ionics and its applications. The term 'solid state ionics' was defined by Takehiko Takahashi of Nagoya University, Japan: it refers to ions in solids, especially solids that exhibit high ionic conductivity at a fairly low temperature below their melting points. During the last few decades of exploration, many ion conducting solids have been discovered in Japan such as the copper-ion conductor Rb4Cu16I7Cl13, proton conductor SrCe1-xYxO3, oxide-ion conductor La0.9Sr0.9Ga0.9Mg0.1O3, and lithium-ion conductor Li10GeP2S12. Rb4Cu16I7Cl13 has a conductivity of 0.33 S cm-1 at 25 °C, which is the highest of all room temperature ion conductive solid electrolytes reported to date, and Li10GeP2S12 has a conductivity of 0.012 S cm-1 at 25 °C, which is the highest among lithium-ion conductors reported to date. Research on high-temperature proton conducting ceramics began in Japan. The history, the discovery of novel ionic conductors and the story behind them are summarized along with basic science and technology.

  3. Policy of Japan of radioactive waste management

    International Nuclear Information System (INIS)

    Oyama, A.

    1989-01-01

    Development and utilization of nuclear power has been steadily pursued in Japan in order to secure a stable source of energy over a long-term period. According to the author, nuclear power plants are operated carefully and safely and have been generating electricity for more than twenty years. In fact, it now accounts for approximately 30% of total electricity generated, and has become an integral part of the energy supply in Japan. The benefits of nuclear technology are now enjoyed not only in the electricity production, but also in the fields such as medicine and other industries. Under such circumstances, radioactive waste management generated in nuclear power plants and reprocessing plants as well as in industrial and medical uses of radiation, is an important part of the nuclear energy policy, and there is also a strong public interest in this field. The government is active in formulating waste management policies based on the basic policies indicated by Japan ATomic Energy Commission (JAEC). This presentation will touch upon the future perspective of radioactive waste management policy in Japan

  4. Governmental Reform and Education for the Gifted in Japan: A Current Analysis

    Science.gov (United States)

    Bugaj, Stephen J.

    2009-01-01

    Though targeted for governmental reform since 2002, services envisioned for gifted and talented students have not materialized in Japan. From the perspective of his personal experience as a Japan Fulbright Memorial Fund participant in 2005 and an extensive review of available literature and contacts with the Japanese Ministry of Education,…

  5. Geographical variance in the risk of gastric stump cancer: no increased risk in Japan?

    NARCIS (Netherlands)

    Tersmette, A. C.; Giardiello, F. M.; Offerhaus, G. J.; Tersmette, K. W.; Ohara, K.; Vandenbroucke, J. P.; Tytgat, G. N.

    1991-01-01

    Geographical differences may exist in the risk of gastric stump cancer. Therefore, we performed meta-analysis of literature reports in Japan (n = 3), the USA (n = 4), and Europe (n = 20) on the risk of postgastrectomy cancer. The weighted mean relative risk of stump cancer in Japan was 0.28, 95%

  6. [Gambling disorder in Japan].

    Science.gov (United States)

    Tanabe, Hitoshi

    2015-09-01

    Gambling disorder is a psychiatric disorder characterized by persistent and recurrent problematic gambling behavior, associated with impaired functioning, reduced quality of life, and frequent divorce and bankruptcy. Gambling disorder is reclassified in the category Substance-Related and Addictive Disorders in the DSM-5 because its clinical features closely resemble those of substance use disorders, and gambling activates the reward system in brain in much the same way drugs do. Prevalence of gambling disorder in Japan is high rate because of slot machines and pachinko game are very popular in Japan. The author recommend group psychotherapy and self-help group (Gamblers Anonymous), because group dynamics make them accept their wrongdoings related to gambling and believe that they can enjoy their lives without gambling.

  7. Future accelerators in Japan

    International Nuclear Information System (INIS)

    Toge, Nobu

    1993-01-01

    This paper presents a brief report on the present status of future accelerator projects at the National Laboratory for High Energy Physics (KEK), Japan. The KEK laboratory has been successfully operating the TRISTAN accelerator complex since 1986. It consists of a 2.5 GeV electron/positron linac, an 8 GeV Accumulation Ring (AR) and a 29 GeV Main Ring (MR). Concurrently with this operation, in response to recommendations by the Japanese High Energy Physics Committee, survey studies have been continued on new accelerator facilities at KEK. They have two major future projects, namely, the asymmetric e + e - B-factory based on TRISTAN (TRISTAN-II) and the Japan Linear Collider (JLC). The purpose of this paper is to outline those research activities and to present an update on their status

  8. Nuclear situation in Japan

    International Nuclear Information System (INIS)

    2006-01-01

    This analysis takes stock on the nuclear situation in Japan. It discusses the ambitious equipment program in collaboration with the France, the destabilization of the japanese nuclear industry following the accidents and the energy policy evolutions. It presents the projects of the japanese nuclear industry: the Monju reactor restart, the Pluthermal project, the reprocessing power plant of Rokkasho Mura, the new reactors, the russian weapons dismantling, the ITER site selection and the buy out of Westinghouse by Toshiba. (A.L.B.)

  9. Japan's fuel recycling policy

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    The Atomic Energy Commission (AEC) has formulated Japanese nuclear fuel recycling plan for the next 20 years, based on the idea that the supply and demand of plutonium should be balanced mainly through the utilization of plutonium for LWRs. The plan was approved by AEC, and is to be incorporated in the 'Long term program for development and utilization of nuclear energy' up for revision next year. The report on 'Nuclear fuel recycling in Japan' by the committee is characterized by Japanese nuclear fuel recycling plan and the supply-demand situation for plutonium, the principle of the possession of plutonium not more than the demand in conformity with nuclear nonproliferation attitude, and the establishment of a domestic fabrication system of uranium-plutonium mixed oxide fuel. The total plutonium supply up to 2010 is estimated to be about 85 t, on the other hand, the demand will be 80-90 t. The treatment of plutonium is the key to the recycling and utilization of nuclear fuel. By around 2000, the private sector will commercialize the fabrication of the MOX fuel for LWRs at the annual rate of about 100 t. Commitment to nuclear nonproliferation, future nuclear fuel recycling program in Japan, MOX fuel fabrication system in Japan and so on are reported. (K.I.)

  10. Psychology in Japan.

    Science.gov (United States)

    Imada, Hiroshi; Tanaka-Matsumi, Junko

    2016-06-01

    The purpose of this article is to provide information about Japan and its psychology in advance of the 31st International Congress of Psychology (ICP), to be held in Yokohama, Japan, in 2016. The article begins with the introduction of the Japanese Psychological Association (JPA), the hosting organization of the ICP 2016, and the Japanese Union of Psychological Associations consisting of 51 associations/societies, of which the JPA is a member. This is followed by a brief description of a history of psychology of Japan, with emphasis on the variation in our approach to psychology in three different periods, that is, the pre- and post-Pacific War periods, and the post-1960 period. Next, the international contributions of Japanese psychology/psychologists are discussed from the point of view of their visibility. Education and training in psychology in Japanese universities is discussed with a final positive remark about the long-awaited enactment of the Accredited Psychologist Law in September, 2015. © 2016 International Union of Psychological Science.

  11. Achievement report for fiscal 1983 on Sunshine Program-entrusted survey and research. Cooperative project between Japan and Australia, etc., on solar energy technology (Cooperation between Japan and France on solar energy technology); 1983 nendo Nichigonado taiyo energy gijutsu kyoryoku jigyo seika hokokusho. Nichifutsu taiyo energy gijutsu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1984-03-01

    This paper reports a survey on solar heat utilization technologies conducted in fiscal 1983 in accordance with a scientific cooperation agreement signed by the Japanese Government and the French Government. The survey was carried out by two employees with the solar technology development office of the New Energy and Industrial Technology Development Organization who were dispatched to France on a tour in the period March 13-24. Concerning the 'French Photovoltaic Program 1982-1986,' knowledge on the goal of the program, long-term research and development, and budgetary matters were obtained at the AFME (French Energy Management Agency) head office and its branches. Relations of AFME with EC (European Community) projects were clarified. The photovoltaic power system (50kW) of Nice Airport is one of the EC projects, and was built thanks to financial aids by EC and AFME. The power system is now in service as a power source for electronic equipment in the airport management building and for taxi lights installed on the ground. The CGE (Compagnie General d'Electricite) central laboratory and the Rhone Poulenc Specialites Chimique were visited, when information on the research and development of a ribbon crystal pulling process and solar-grade silicon was acquired. (NEDO)

  12. Model project for enhancing energy consumption efficiency in developing countries. Report on changes of energy conservation technology and environmental protection technology in the chemical industry of Japan; Hatten tojokoku energy shohi koritsuka model jigyo. Nippon kagaku kogyo ni okeru sho energy gijutsu to kankyo taisaku gijutsu no hensen hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of contributing to the economic growth and the global environmental protection in the Asian area, an investigation was carried out into energy conservation technology and environmental protection technology in the chemical industry of Japan. Measures for energy conservation are shifting from those which do not cost so much such as reduction in excess air rate of the heating furnace, and reduction in reflux ratio of the distillation tower to those with equipment investment such as waste heat recovery of the heating furnace and waste heat recovery of the distillation tower. In the 1980s, the utilization of low temperature waste heat by absorption type refrigerator and heat pump was promoted and the energy utilization efficiency by computer control was enhanced. Concerning environmental measures, the following were carried out: installation of the flue gas desulfurization device and reconstruction of high-rise stack, reduction of NOx by combustion control, smoke/dust disposal of electrostatic precipitator, combustion of hydrocarbon causing photochemical oxidant, catalytic oxidation, condensation, treatment by activated carbon, activated sludge treatment for BOD/COD, diaphragm process for dimethylmercury, ion exchange resin process, etc. 21 refs., 29 figs., 27 tabs.

  13. Report on survey in fiscal 2000 on the survey on succession of history of industrial technologies. Survey edition of originality and creativity of electric and electronic technologies in Japan; 2000 nendo sangyo gijutsu rekishi keisho chosa hokokusho. Kokunai sangyo no denki denshi gijutsu no dokusosei to sozosei no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to clarify the innovation process of industrial technologies in Japan and the originality and creativity seen in that process to serve for the future development, hearing surveys have been performed. The persons being the hearing objects are Mr. Koichi Oshima who has researched the series capacitors for power transmission cables, Mr. Makoto Osatake who has researched the distortion in frequency modulation, and Mr. Hisao Oka who has researched the destruction phenomena in rectifier elements of power semiconductors. Mr. Hiroshi Inose and Mr. Toichiro Koike who have accepted the hearing survey were represented by the mourning statements due to their sudden death. The items of the questions in the hearing survey included: their home background, why have they studied electricity area specially?, determination criteria when they were forced to make a serious selection and the results thereof, examples of successes and failures and the age background, breakthrough points in the success cases, what they want to convey to future generations from their achievements, what they wished if they have done, methods of conveying the technologies, persons whom they respect as their teachers, existence of persons who have given them protection, sources of passion and motivation that supported the research life, and the principles toward the research. (NEDO)

  14. Evolution of Cognitive Rehabilitation After Stroke From Traditional Techniques to Smart and Personalized Home-Based Information and Communication Technology Systems: Literature Review.

    Science.gov (United States)

    Cogollor, José M; Rojo-Lacal, Javier; Hermsdörfer, Joachim; Ferre, Manuel; Arredondo Waldmeyer, Maria Teresa; Giachritsis, Christos; Armstrong, Alan; Breñosa Martinez, Jose Manuel; Bautista Loza, Doris Anabelle; Sebastián, José María

    2018-03-26

    Neurological patients after stroke usually present cognitive deficits that cause dependencies in their daily living. These deficits mainly affect the performance of some of their daily activities. For that reason, stroke patients need long-term processes for their cognitive rehabilitation. Considering that classical techniques are focused on acting as guides and are dependent on help from therapists, significant efforts are being made to improve current methodologies and to use eHealth and Web-based architectures to implement information and communication technology (ICT) systems that achieve reliable, personalized, and home-based platforms to increase efficiency and level of attractiveness for patients and carers. The goal of this work was to provide an overview of the practices implemented for the assessment of stroke patients and cognitive rehabilitation. This study puts together traditional methods and the most recent personalized platforms based on ICT technologies and Internet of Things. A literature review has been distributed to a multidisciplinary team of researchers from engineering, psychology, and sport science fields. The systematic review has been focused on published scientific research, other European projects, and the most current innovative large-scale initiatives in the area. A total of 3469 results were retrieved from Web of Science, 284 studies from Journal of Medical Internet Research, and 15 European research projects from Community Research and Development Information Service from the last 15 years were reviewed for classification and selection regarding their relevance. A total of 7 relevant studies on the screening of stroke patients have been presented with 6 additional methods for the analysis of kinematics and 9 studies on the execution of goal-oriented activities. Meanwhile, the classical methods to provide cognitive rehabilitation have been classified in the 5 main techniques implemented. Finally, the review has been finalized with

  15. Spent fuel management in Japan

    International Nuclear Information System (INIS)

    Mineo, H.; Nomura, Y.; Sakamoto, K.

    1998-01-01

    In Japan 52 commercial nuclear power units are now operated, and the total power generation capacity is about 45 GWe. The cumulative amount of spent fuel arising is about 13,500 tU as of March 1997. Spent fuel is reprocessed, and recovered nuclear materials are to be recycled in LWRs and FBRs. In February 1997 short-term policy measures were announced by the Atomic Energy Commission, which addressed promotion of reprocessing programme in Rokkasho, plutonium utilization in LWRs, spent fuel management, backend measures and FBR development. With regard to the spent fuel management, the policy measures included expansion of spent fuel storage capacity at reactor sites and a study on spent fuel storage away from reactor sites, considering the increasing amount of spent fuel arising. Research and development on spent fuel storage has been carried out, particularly on dry storage technology. Fundamental studies are also conducted to implement the burnup credit into the criticality safety design of storage and transportation casks. Rokkasho reprocessing plant is being constructed towards its commencement in 2003, and Pu utilization in LWRs will be started in 1999. Research and development of future recycling technology are also continued for the establishment of nuclear fuel cycle based on FBRs and LWRs. (author)

  16. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  17. Mergers & Acquisitions in Japan : Lessons for Dutch companies

    NARCIS (Netherlands)

    Grotenhuis, F.D.J.

    2009-01-01

    This article deals with lessons learned from mergers and acquisitions in Japan. In general, such combinations are not success stories, since 50–80 percent of them do not bring the benefits that were expected. Several reasons for such failures have been brought up in the literature, but real-life

  18. "There's a west wind coming" : Sherlock Holmes in Meiji Japan

    OpenAIRE

    堤林, 恵

    2015-01-01

    IntroductionJapan's Aspiration and the Reception of English Literature"Europeanization" and the Rising Tide of NationalismThe Standing of Detective FictionA Brief Overview of Sherlock Holmes TranslationsSherlock Holmes Refracted Through a PrismConclusion

  19. Japan, world leader of photovoltaic energy

    International Nuclear Information System (INIS)

    Strasser, F.

    2006-01-01

    Since the beginning of the 1970's, the potentialities of photovoltaic energy has been recognized by the Japanese government which has sustained this technology in two ways. First, by the financing of R and D programs, and second, by giving subsidies to citizens for the installation of solar panels. Today, Japan is the world leader of photovoltaic energy, both for the installed power and for the production of solar cells. In 2003, the International Energy Agency was reporting 1.809 GW of worldwide installed capacity among which 48% was in Japan (0.86 GW) with respect to 0.4 GW in Germany, 0.275 GW in the USA and only 20 MW in France. This capacity would have exceeded 1.1 GW at the end of 2004. Half of the solar modules are manufactured in Japan. The ministry of economy, trade and industry (METI) has fixed ambitious goals for 2010: the overall new energy sources much represent 3% of the primary energy (with respect to 1% today) and the installed capacity must reach 4.8 GW. The road-map of the New Energy and Industrial Technology Development Organisation (NEDO) foresees 100 GW by 2030. (J.S.)

  20. FBR/VHTR deployment scenarios in Japan

    International Nuclear Information System (INIS)

    Richards, Matt; Kunitomi, Kazuhiko

    2008-01-01

    Co-deployment of Fast Breeder Reactors (FBRs) and Very High Temperature Reactors (VHTRs) can be used as the nuclear technologies to meet a significant portion of Japan's future energy demands. The FBR provides the fissile fuel for energy security and sustainability, and can be used to provide a significant portion of the electricity demand. The VHTR can provide flexible energy outputs (electricity, hydrogen, and high-temperature heat) with high efficiency, can operate with a wide variety of fuel cycles, and can be sited at locations that have limited availability of cooling water. These features, combined with its passive safety and high degree of proliferation resistance, make the VHTR an ideal complement for co-deployment with the FBR in Japan and also a very low-risk technology of export to foreign countries. In addition to hydrogen production, the high-temperature thermal energy produced by the VHTR fleet can be used for a wide variety of process-heat applications, and the VHTR can play a key role for significantly reducing greenhouse-gas emissions. This paper describes assessments for deploying FBRs and VHTRs in Japan using a closed fuel cycle, with the FBRs supplying the fissile material to sustain the combined FBR/VHTR fleet. (author)

  1. Romanticising Shinsengumi in Contemporary Japan

    Directory of Open Access Journals (Sweden)

    Rosa Lee

    2011-01-01

    Full Text Available Shinsengumi, a group of young men recruited by the Bakufu to protect Kyoto from radical Imperial House loyalists in the tumultuous Bakumatsu period, is romanticised and idolised in Japan despite its limited place in history. This article attempts to comprehend this phenomenon by locating the closest crystallisation of popularly imagined Shinsengumi in Moeyo ken, a popular historical fiction by Shiba Ryōtarō. Antonio Gramsci explains readers are attracted to popular literature because it reflects their ‘philosophies of the age’, which may be discovered by examining popular heroes with their subsequent replications. This article will identify why Shinsengumi is appealing by comparing Shiba’s hero in Moeyo ken with its twenty-first century reincarnation in Gintama, a popular manga series, and by discerning reader response to Moeyo ken from customer reviews on Amazon.co.jp. It will be demonstrated from these studies that a likely reason for the Japanese public’s romanticisation of Shinsengumi in recent years could be their attraction to autonomous, self-determining heroes who also appreciate the value of community.

  2. Applications of shape memory alloys in Japan

    International Nuclear Information System (INIS)

    Asai, M.; Suzuki, Y.

    2000-01-01

    In Japan, a first application of shape memory TiNi alloy was a moving flap in an air-conditioner which was developed as sensing function of shape memory alloy at Matsushista Electric Industrial Co. Then, shape memory utilized in a coffee maker, an electric rice-cooker, a thermal mixing valve and etc. were commercialized in Japan. And brassiere wires, a guide wire for medical treatment, an antenna for portable telephone and others were commercialized utilizing superelasticity. At the same time with these commercial products, there was not only progress in fabrication technology to effect accurate transformation temperature, but also the discovery of small hysteresis alloy such as R-phase or TiNiCu alloy and low transformation temperature alloy such as TiNiFe, TiNiV and TiNiCo alloys. Therefore the shape memory alloy market has expanded widely to electric appliances, automobile, residence, medical care and other field today. (orig.)

  3. Progress of metallic superconductors in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Tachikawa, Kyoji, E-mail: tacsuper@keyaki.cc.u-tokai.ac.jp [Faculty of Engineering, Tokai University, 4-1-1, Kitakaname, Hiratsuka, Kanagawa 259-1292 (Japan)

    2013-01-15

    Highlights: ► Japanese contributions on the R and D of different metallic superconductors are summarized. ► Nb–Ti wires have been developed for MRI, accelerator, MAGLEV train and other applications. ► Multifilamentary Nb{sub 3}Sn wires with excellent performance have been developed for high-field use. ► Long-length Nb{sub 3}Al wires with promising strain tolerance have been fabricated by a new process. -- Abstract: This article overviews the development of metallic superconductors in Japan covering different kinds of alloys and intermetallic compounds. Metallic superconductors have opened many new application areas in science and technology. Japan has been one of the leading countries in the world, both in the research and development and in large-scale manufacturing of metallic superconductors.

  4. Current status in Japan related to LMNPP

    International Nuclear Information System (INIS)

    Otsuka, Takehiro

    1998-01-01

    Current status of nuclear power plants in Japan is presented with the basic concepts against ageing of LWR plants which are considered to continue growing into the 21st century. Life management for aged NPPs is recognized to be important for the safe and reliable operation. In April 1996 MITI published the first report regarding the measures to cope with the aged NPPs. Two BWRs and one PWR were evaluated as aged NPPs in Phase-I Technical evaluation, which concluded that safe operation is possible with correct and adequate maintenance despite operation exceeded 30 years. The technology development items towards attaining further highly reliable management were indicated including the inspection/monitoring technology, the preventive maintenance/repair technology and ageing evaluation technology

  5. a literature review

    African Journals Online (AJOL)

    user

    Dr Nicholas Z Kakava. School of Business Sciences & Management. Chinhoyi University of Technology. Zimbabwe. Waiting as a determinant of store image and customer satisfaction: A literature review. 99 ... jective experience and the associated frustration is not necessarily related to an objective meas- urement of time.

  6. English education for healthcare professionals in Japan.

    Science.gov (United States)

    Moross, Janelle; Seki, Naoko; Morio, Ikuko

    2017-11-01

    In a global environment, education for healthcare professionals should include cultivating human resources who have the necessary skills to work in an international arena. This article will review the current status of English education for dental healthcare professionals in Japan. After conducting a literature search using the keywords: English education, Japan, and dental, only a few studies were found that investigated and proposed suggestions for dental professional English education. Even so, these were still in the early stages with outcomes yet to be fully evaluated. Even though English is thought indispensable for global professionals, and that increasing chances for communication skills is necessary, little attention has been addressed to English education for dental professionals or the implementation of such education in the Japanese undergraduate dental curricula. With the current reality of field expansion in dentistry, the need for not only improved English communication skills for Japanese dentists, but also the acquisition of essential expertise, psychomotor, teambuilding, critical thinking, and creative thinking skills in English as well as Japanese, is a definite probability. In order to reach this level of knowledge, further efforts and research would be necessary for the advancement and development of dental professional English education in Japan.

  7. The graying of Japan.

    Science.gov (United States)

    Martin, L G

    1989-07-01

    Japan's rapidly aging population has become a top policy issue, especially as the increasing costs of pensions and medical care are debated. With the highest life expectancy on earth, the Japanese potentially face long periods of retirement, as well as the possibility of long periods of disability. Although family support of the elderly is thought to have been strong traditionally, the recent decline in co-residence with children is 1 indication that the way support is given may be changing. This issue is of particular concern to the government, which wants to avoid any greater responsibility for the elderly than is necessary given the dramatic population aging yet to come. The government is also encouraging employers to provide more employment opportunities for the elderly at the same time that it is trying to raise the eligibility age for the receipt of public pensions. There is resistance on the part of employers, however, because wages and retirement allowances in Japan are positively related to length of employment. Furthermore, it is not clear whether elderly Japanese of the future will be as willing to work, if they learn to enjoy increased leisure early in their careers. Nevertheless, it is unlikely that population aging will lead to Japan's economic decline. Although the savings rate may decline somewhat, restructuring of the economy and continued overseas investment should keep the economy growing in the long run. Important in both the care of the frail elderly and the continued growth of the economy will be the roles played by middle-aged Japanese women.

  8. Skiing research in Japan.

    Science.gov (United States)

    Watanabe, K

    1981-01-01

    Skiing and skiing techniques were introduced by the Austrians to Japanese soldiers in 1911. After that, skiing spread beyond the original purpose and recently produced the ski sciences. From a sports biomechanical aspect, the development of the study of ski jumping, alpine skiing, and the basic movement in skiing is introduced in this paper. One of the characteristic points of these studies in Japan was that the ski sciences were supported not only by biomechanists and physiologists, but also basically by physicists and engineers. The fundamental research and studies from divergent fields are supporting each other and being integrated into ski science.

  9. Nyheder i Japan

    DEFF Research Database (Denmark)

    Sejrup, Jens

    2016-01-01

    Kan man stole på, hvad folk siger, når man ikke ved, hvem de er? Forholdet mellem kildeanonymitet og troværdighed er forskelligt i mediesystemer rundt om i verden. Troværdighed er ingen universel størrelse, men en retorisk effekt der opstår på baggrund af faktorer som er kulturelt og systemisk in...... indlejret. I Japan har seriøse nyhedsmedier et specielt forhold til udsagn fra anonyme kilder, og udstrakt brug af uidentificerede informanter står ikke i modsætning til journalistisk kvalitet og pålidelighed....

  10. Positioning Indian Emigration to Japan

    DEFF Research Database (Denmark)

    D'Costa, Anthony

    2013-01-01

    as other IT-strong developing countries, are to supply technical talent, whose availability in Japan is constrained by the secular demographic crisis and changing educational and occupational preferences. The challenges for India are the institutional barriers, in particular, Japanese business practices...... that act as significant barriers to the entry of foreign skilled professionals. The paper brings out the source and pattern of foreign professionals and students in Japan as a proxy for talent. Though India’s presence in Japan is currently limited, its share of technical professionals to the total number....... For Japan, it means access to technical professionals and managed interfacing with the global economy....

  11. Survey report in fiscal 1999 on investigations for the current status in energy and environmental problems in Japan and the U.S.A., and investigations on technological development related to energies; 1999 nendo Nichibei ni okeru energy kankyo mondai no genjo chosa oyobi energy ni kakawaru gijutsu kaihatsu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper reports the surveys in fiscal 1999 on energy and developmental problems in Japan and the U.S.A. New and complex environmental problems are rising to the surface, such as global warming, ozone layer destruction, and chemical harms. It is necessary to deepen quickly scientific understanding of the problems, and identify accurately their impacts on human bodies and ecological systems. Within the limitation of the scientific understanding, political decisions on economy and environmental risks are also important and difficult questions, with the environmental hormones being the typical examples. Establishing chemical substance verification systems is important, whereas joint researches by Japan and the U.S.A. are desired. Policy decisions on handling the researches must also be made jointly, and acceptance by citizens must be asked for at international workshops. While energies are the base of economic activities, and the sustained development thereof is indispensable, how to take balance with health and environment in the global scale is a large assignment. Joint Japan-U.S. discussions are required on technological innovation, such as for regenerative energies, energy conservation, safety of and wastes from nuclear reactors, clean use of fossil fuels, and fuel cells. International cooperation, including that from developing countries, is also important. (NEDO)

  12. Magnetic materials in Japan research, applications and potential

    CERN Document Server

    2013-01-01

    Please note this is a Short Discount publication. This, the third report in Elsevier's Materials Technology in Japan series, concentrates on magnetic materials as a topic gaining worldwide attention, and each chapter looks not only at current research, but also describes the technology as it is being applied and its future potential. Magnetic-related research is the second largest field of research in Japan after semiconductors, with the estimated number of researchers and engineers engaged in magnetics-related activities currently at 20,000. This research report serves as both a review of

  13. What Constitutes Traditional and Modern Eating? The Case of Japan

    Science.gov (United States)

    Imada, Sumio; Furumitsu, Isato; Rozin, Paul; Ruby, Matthew B.; Arbit, Naomi; Fischler, Claude; Schupp, Harald T.; Renner, Britta

    2018-01-01

    Traditional Japanese dietary culture might be a factor contributing to the high life expectancy in Japan. As little is known about what constitutes traditional and modern eating in Japan, the aims of the current study were to (1) comprehensively compile and systematize the various facets of traditional and modern eating; and (2) investigate whether these facets also apply to traditional and modern eating in Japan. In Study 1, an extensive international literature review was performed. Forty-five facets of traditional and modern eating were compiled and systematized into the dimensions of what and how people eat, and into eleven separate subdimensions. In Study 2, 340 adults from Japan answered a questionnaire. Results showed that traditional and modern eating in Japan is reflected in both what and how people eat. Within these two dimensions, ten subdimensions were found: the ingredients, processing, temporal origin, spatial origin, and variety of consumed foods, as well as temporal, spatial, and social aspects, appreciation, and concerns when eating. This study provides a broad compilation of facets of traditional and modern eating in Japan. Future research should investigate how these facets are related to life expectancy and health. PMID:29370081

  14. What Constitutes Traditional and Modern Eating? The Case of Japan

    Directory of Open Access Journals (Sweden)

    Gudrun Sproesser

    2018-01-01

    Full Text Available Traditional Japanese dietary culture might be a factor contributing to the high life expectancy in Japan. As little is known about what constitutes traditional and modern eating in Japan, the aims of the current study were to (1 comprehensively compile and systematize the various facets of traditional and modern eating; and (2 investigate whether these facets also apply to traditional and modern eating in Japan. In Study 1, an extensive international literature review was performed. Forty-five facets of traditional and modern eating were compiled and systematized into the dimensions of what and how people eat, and into eleven separate subdimensions. In Study 2, 340 adults from Japan answered a questionnaire. Results showed that traditional and modern eating in Japan is reflected in both what and how people eat. Within these two dimensions, ten subdimensions were found: the ingredients, processing, temporal origin, spatial origin, and variety of consumed foods, as well as temporal, spatial, and social aspects, appreciation, and concerns when eating. This study provides a broad compilation of facets of traditional and modern eating in Japan. Future research should investigate how these facets are related to life expectancy and health.

  15. What Constitutes Traditional and Modern Eating? The Case of Japan.

    Science.gov (United States)

    Sproesser, Gudrun; Imada, Sumio; Furumitsu, Isato; Rozin, Paul; Ruby, Matthew B; Arbit, Naomi; Fischler, Claude; Schupp, Harald T; Renner, Britta

    2018-01-25

    Traditional Japanese dietary culture might be a factor contributing to the high life expectancy in Japan. As little is known about what constitutes traditional and modern eating in Japan, the aims of the current study were to (1) comprehensively compile and systematize the various facets of traditional and modern eating; and (2) investigate whether these facets also apply to traditional and modern eating in Japan. In Study 1, an extensive international literature review was performed. Forty-five facets of traditional and modern eating were compiled and systematized into the dimensions of what and how people eat, and into eleven separate subdimensions. In Study 2, 340 adults from Japan answered a questionnaire. Results showed that traditional and modern eating in Japan is reflected in both what and how people eat. Within these two dimensions, ten subdimensions were found: the ingredients, processing, temporal origin, spatial origin, and variety of consumed foods, as well as temporal, spatial, and social aspects, appreciation, and concerns when eating. This study provides a broad compilation of facets of traditional and modern eating in Japan. Future research should investigate how these facets are related to life expectancy and health.

  16. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  17. Information on research in progress in Japan publication of 'Nuclear Science Information of Japan-Oral Presentation'

    International Nuclear Information System (INIS)

    Itabashi, Keizo; Nakajima, Hidemitsu; Yokoo, Hiroshi

    1988-01-01

    The new journal, 'Nuclear Science Information of Japan-Oral Presentation', which was entirely revised from the previous abstract journal called 'Nuclear Science Information of Japan' was introduced. This is to be published quaterly in principle and compiled information by oral presentation presented at main conferences, symposia and other kind of formal meetings in the field of nuclear science and technology in Japan. Not all of the oral presentation is always contributed later to a proceeding or a journal as a full paper in Japan. In some cases, the pre-conference paper might be a only publication of the oral presentation. In this meaning, this journal could be used as a search tool for the subjects and the projects of nuclear research and development in progress. (author)

  18. Legalized abortion in Japan.

    Science.gov (United States)

    Hart, T M

    1967-10-01

    The enactment of the Eugenic Protection Act in Japan was followed by many changes. The population explosion was stemmed, the birth rate was halved, and while the marriage rate remained steady the divorce rate declined. The annual total of abortions increased until 1955 and then slowly declined. The highest incidence of abortions in families is in the 30 to 34 age group when there are four children in the family. As elsewhere abortion in advanced stages of pregnancy is associated with high morbidity and mortality. There is little consensus as to the number of criminal abortions. Reasons for criminal abortions can be found in the legal restrictions concerning abortion: Licensing of the abortionist, certification of hospitals, taxation of operations and the requirement that abortion be reported. Other factors are price competition and the patient's desire for secrecy. Contraception is relatively ineffective as a birth control method in Japan. Oral contraceptives are not yet government approved. In 1958 alone 1.1 per cent of married women were sterilized and the incidence of sterilization was increasing.

  19. Food irradiation in Japan

    International Nuclear Information System (INIS)

    Ito, Hitoshi

    1995-01-01

    The basic research on food irradiation in Japan was begun around 1955 by universities and national laboratories. In 1967, food irradiation was designated to the specific general research on atomic energy, and the national project on large scale was continued until 1983. As the result, the treatment of germination prevention for potatoes was approved by the Ministry of Health and Welfare in 1972. The Co-60 gamma ray irradiation facility of Shihoro Agricultural Cooperative is famous as the facility that succeeded in the practical use of food irradiation for the first time in the world. But the practical use of food irradiation stagnates and the research activities were reduced in Japan due to the circumstances thereafter. The effect of radiation to foods and living things is explained. The features of the radiation treatment of foods are small temperature rise, large transmissivity, no residue, the small loss of nutrition and large quantity, continuous treatment. The safety of irradiated foods is explained. The subjects for hereafter are discussed. (K.I.)

  20. IAEA Remediation Mission to Japan Concludes

    International Nuclear Information System (INIS)

    2011-01-01

    Full text: A team of international experts today completed a preliminary assessment of the strategy and plans being considered by the Japanese authorities to remediate the areas off-site the Fukushima Dai-ichi Nuclear Power Plant reported to have elevated levels of radiation. The IAEA dispatched the mission to Japan on 7 October following a request from the country's Government. The mission, comprising 12 international and IAEA experts from several countries, visited numerous locations in the Fukushima Prefecture and conducted meetings in Tokyo and Fukushima with Japanese officials from several Ministries and institutions. ''The meetings held and visits made by the team over the last eight days gave us a first-hand appreciation of the extraordinary efforts and dedication on the part of Japanese people in their effort to remediate the areas affected by elevated levels of radiation in the Fukushima Prefecture,'' says Mr. Juan Carlos Lentijo, Team Leader and General Director for Radiation Protection at Spain's nuclear regulatory authority. ''As Japan continues its current remediation efforts, it is our belief that this work will bring relief to the populations who are affected by the consequences of the nuclear accident at the Fukushima Dai-ichi nuclear power plant.'' In a Preliminary Summary Report delivered to Japanese authorities today, the team prepared a set of conclusions including, though not limited to, the following: - Japan developed an efficient program for remediation - allocating the necessary legal, financial and technological resources to bring relief to the people affected by the accident, with priority being given to children. The Team was impressed with the strong commitment to the remediation effort from all institutions and parties involved, including the public; - Japan has also taken practical measures to inform the public and involve residents and local institutions in the process of defining its remediation strategy; - Japan is advised to avoid

  1. Government policy and the development of electric vehicles in Japan

    International Nuclear Information System (INIS)

    Ahman, Max

    2006-01-01

    The aim of this paper is to analyse the role that the Japanese Government has played in the development of alternatives to conventional vehicles, the effect of government programmes, and the importance of technical flexibility in government support schemes. The focus is on battery-powered electric vehicles (BPEVs), hybrid electric vehicles (HEVs), and fuel cell electric vehicles. The effects of government policy and the process of innovation are analysed from a systems approach drawing on the literature regarding technical change and innovation. The whole chain of government support, including the context in which these different policies have been implemented since the early 1970s, is studied. The Japanese Government has adopted a comprehensive strategy including R and D, demonstration programmes and market support guided by long-term strategic plans. The role of the Government has been that of a conductor in the development process supplying both R and D support and artificially created niche markets, and easing the way for targeted technologies by means of legislation and standards. Despite this, the targeted technology (the BPEV) has not been established on the market. However, the recent market success of the HEV can partly be attributed to the government support of the BPEV technology. The enabling component, the electric drivetrain, was developed for automotive use within the BPEV programmes offered by the MITI. This technology was later utilised in the HEV. The history of BPEVs in Japan demonstrates that 'picking winners' in government policy is not easy. Despite a sustained and ambitious policy by the MITI, the development of alternative vehicles never unfolded according to plan. The success factors for policy seem more related to technology specific features than the particular policy style. Our conclusion is that flexibility, adaptability and cooperation in terms of technical choice is necessary in policy. This increases the chances of a technology

  2. Study on geology and geological structure based on literature studies

    International Nuclear Information System (INIS)

    Funaki, Hironori; Ishii, Eiichi; Yasue, Ken-ichi; Takahashi, Kazuharu

    2005-03-01

    Japan Nuclear Cycle Development Institute (JNC) is proceeding with underground research laboratory (URL) project for the sedimentary rock in Horonobe, Hokkaido. This project is an investigation project which is planned over 20 years. Surface-based investigations (Phase 1) have been conducted for the present. The purposes of the Phase 1 are to construct the geological environment model (geological-structural, hydrogeological, and hydrochemical models) and to confirm the applicability of investigation technologies for the geological environment. The geological-structural model comprises the base for the hydrogeological and hydrochemical models. We constructed the geological-structural model by mainly using data obtained from literature studies. Particulars regarding which data the model is based on and who has performed the interpretation are also saved for traceability. As a result, we explain the understanding of degree and the need of information on stratigraphy and discontinuous structure. (author)

  3. Groundwater flow analyses in Japan. 1. Case studies in Hokkaido and Northeast Japan

    International Nuclear Information System (INIS)

    Inaba, Hideo; Maekawa, Keisuke; Koide, Kaoru; Yanagizawa, Koichi

    1995-01-01

    An extensive study program has been carried out to estimate hydrogeological characteristics of deep underground in Japan. As a part of this program, groundwater flow analysis in Hokkaido and Northeast Japan were conducted. For the analyses of these area, hydrogeological models representing topography, geology, distribution of hydraulic conductivity were developed using available informations from open literature. By use of these models, steady state three-dimensional groundwater flow under a saturated/unsaturated condition was calculated by means of finite element method. The results are as follows: (1) Distribution of piezometric head corresponds with topography in the study area. (2) Piezometric head distribution is hydrostatic below E.L.-1000m in the study area. (3) Hydraulic gradient in the study area is less than 0.04 below E.L.-500m. (4) Difference of boundary conditions at the shore side of these models does not affect the results of the analyses. (author)

  4. Barbarian medicine in feudal Japan.

    Science.gov (United States)

    Fodstad, Harald; Hariz, Marwan I; Hirabayashi, Hidehiro; Ohye, Chihiro

    2002-10-01

    THE FIRST EUROPEANS to discover Japan were Portuguese traders who arrived in 1542. Fifteen years later, the Portuguese Jesuit priest and surgeon Luis De Almeida (1525-1583) founded the first Western hospital in Japan, for the care of lepers, syphilitics, and orphans. Because the hospital had a negative influence on the spread of Christianity, the Jesuits closed it in 1586. During the Tokugawa Shogunate (1600-1868), when Japan was secluded from the rest of the world, the only foreign physicians allowed to enter Japan were those employed by the Dutch factory at Dejima in Nagasaki. Only four of those physicians left behind seeds for the foundation of Western medicine in Japan, namely Caspar Schambergen, who founded a Japanese school of surgery in 1650; Engelbert Kämpfer, who visited Japan in 1691 to 1692; Carl Peter Thunberg, who botanically explored Japan in 1775 to 1776; and Philipp Franz Balthasar von Siebold, who practiced medicine in Nagasaki in 1823 to 1829 and 1859 to 1861. On the whole, Western medicine and surgery never established a real foothold in Japan until the fall of the shogunate and the restoration of the emperor in 1868.

  5. Recent developments: Japan and Australia

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    Recent developments in the nuclear industry in Japan and Australia are briefly reviewed. Topics discussed include: the world energy situation; and nuclear power generation trends and completion the nuclear fuel cycle in Japan. Recent events that suggest possible policy changes in Australia are briefly discussed

  6. Spent fuel treatment in Japan

    International Nuclear Information System (INIS)

    Takahashi, K.

    1999-01-01

    In Japan, 52 nuclear power reactors are operating with a total power generation capacity of 45 GWe. The cumulative amount of spent fuel arising, as of March 1998, is about 14,700 W. Spent fuel is reprocessed and recovered nuclear materials are to be recycled in LWRs and FBRs. Pu utilization in LWRs will commence in 1999. In January 1997, short-term policy measures were announced by the Atomic Energy Commission, which addressed promotion of the reprocessing programme in Rokkasho, plutonium utilization in LWRs, spent fuel management, back-end measures and FBR development. With regard to the spent fuel management, the policy measures included expansion of spent fuel storage capacity at reactor sites and a study on spent fuel storage away-from-reactor sites, considering the increasing amount of spent fuel arising. Valuable experience was been accumulated at the Tokai Reprocessing Plant (TRP), from the start of hot operation in 1977 up to now. The role of the TRP will be changed from an operation-oriented to a more R and D oriented facility, when PNC is reorganized into the new organization JNC. The Rokkasho reprocessing plant is under construction and is expected to commence operation in 2003. R and D of future recycling technologies is also continued for the establishment of a nuclear fuel cycle based on FBRs and LWRs. (author)

  7. Intertextuality in the Literature

    Directory of Open Access Journals (Sweden)

    Mustafa Albay

    2017-06-01

    Full Text Available Literature is not the product of a specific nation; rather it is a combination of the experiences of all nations. So to speak, there is inheritance amongst the literary texts all over the world literature. Thinking of the global changes and technological development, it is quite easy to see the issue of interaction between the nations which is called “intertextuality”. This concept appears in a literary work within different interactions. Especially the religions, trade, wars, social and or economic movement, internet and technology have significant roles in this because this interaction is provided through these factors in the society. Now that, the society is mirrored up in the literature, these affects necessarily will be seen in the literature and the scholars deal with finding formic, contently and stylistic resemblances among the cultures and literary areas in a literary work. In this study, two aspects of these interactions in the literature will be handled as theme-based and form-based. The stylistic resemblances will be treated under the form-based part.

  8. Generic antibiotics in Japan.

    Science.gov (United States)

    Fujimura, Shigeru; Watanabe, Akira

    2012-08-01

    Generic drugs have been used extensively in many developed countries, although their use in Japan has been limited. Generic drugs reduce drug expenses and thereby national medical expenditure. Because generic drugs provide advantages for both public administration and consumers, it is expected that they will be more widely used in the future. However, the diffusion rate of generic drugs in Japan is quite low compared with that of other developed countries. An investigation on generic drugs conducted by the Ministry of Health, Labour and Welfare in Japan revealed that 17.2 % of doctors and 37.2 % of patients had not used generic drugs. The major reasons for this low use rate included distrust of off-patent products and lower drug price margin compared with the brand name drug. The generic drugs available in the market include external drugs such as wet packs, antihypertensive agents, analgesics, anticancer drugs, and antibiotics. Among them, antibiotics are frequently used in cases of acute infectious diseases. When the treatment of these infections is delayed, the infection might be aggravated rapidly. The pharmacokinetics-pharmacodynamics (PK-PD) theory has been adopted in recent chemotherapy, and in many cases, the most appropriate dosage and administration of antibiotics are determined for individual patients considering renal function; high-dosage antibiotics are used preferably for a short duration. Therefore, a highly detailed antimicrobial agent is necessary. However, some of the generic antibiotics have less antibacterial potency or solubility than the brand name products. We showed that the potency of the generic products of vancomycin and teicoplanin is lower than that of the branded drugs by 14.6 % and 17.3 %, respectively. Furthermore, we confirmed that a generic meropenem drug for injection required about 82 s to solubilize in saline, whereas the brand product required only about 21 s. It was thought that the cause may be the difference in size of bulk

  9. Spent fuel management in Japan

    International Nuclear Information System (INIS)

    Shirahashi, K.; Maeda, M.; Nakai, T.

    1996-01-01

    Japan has scarce energy resources and depends on foreign resources for 84% of its energy needs. Therefore, Japan has made efforts to utilize nuclear power as a key energy source since mid-1950's. Today, the nuclear energy produced from 49 nuclear power plants is responsible for about 31% of Japan's total electricity supply. The cumulative amount of spent fuel generated as of March 1995 was about 11,600 Mg U. Japan's policy of spent fuel management is to reprocess spent nuclear fuel and recycle recovered plutonium and uranium as nuclear fuel. The Tokai reprocessing plant continues stable operation keeping the annual treatment capacity or around 90 Mg U. A commercial reprocessing plant is under construction at Rokkasho, northern part of Japan. Although FBR is the principal reactor to use plutonium, LWR will be a major power source for some time and recycling of the fuel in LWRs will be prompted. (author). 3 figs

  10. 21 CFR 186.1555 - Japan wax.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Japan wax. 186.1555 Section 186.1555 Food and Drugs... Substances Affirmed as GRAS § 186.1555 Japan wax. (a) Japan wax (CAS Reg. No. 8001-39-6), also known as Japan... fruits of the oriental sumac, Rhus succedanea (Japan, Taiwan, and Indo-China), R. vernicifera (Japan...

  11. Literature Reviews

    Science.gov (United States)

    Rhoades, Ellen A.

    2011-01-01

    The primary purpose of a literature review is to assist readers in understanding the whole body of available research on a topic, informing readers on the strengths and weaknesses of studies within that body. It is defined by its guiding concept or topical focus: an account of what was previously published on a specific topic. This prevents…

  12. Virtual laboratory for fusion research in Japan

    International Nuclear Information System (INIS)

    Tsuda, K.; Nagayama, Y.; Yamamoto, T.; Horiuchi, R.; Ishiguro, S.; Takami, S.

    2008-01-01

    A virtual laboratory system for nuclear fusion research in Japan has been developed using SuperSINET, which is a super high-speed network operated by National Institute of Informatics. Sixteen sites including major Japanese universities, Japan Atomic Energy Agency and National Institute for Fusion Science (NIFS) are mutually connected to SuperSINET with the speed of 1 Gbps by the end of 2006 fiscal year. Collaboration categories in this virtual laboratory are as follows: the large helical device (LHD) remote participation; the remote use of supercomputer system; and the all Japan ST (Spherical Tokamak) research program. This virtual laboratory is a closed network system, and is connected to the Internet through the NIFS firewall in order to keep higher security. Collaborators in a remote station can control their diagnostic devices at LHD and analyze the LHD data as they were at the LHD control room. Researchers in a remote station can use the supercomputer of NIFS in the same environment as NIFS. In this paper, we will describe detail of technologies and the present status of the virtual laboratory. Furthermore, the items that should be developed in the near future are also described

  13. Status of the HTTR project in Japan

    International Nuclear Information System (INIS)

    Sanokawa, K.

    1989-01-01

    In June 1987, the Japanese Atomic Energy Commission issued the revision of the Long-Term Program for Development and Utilization of Nuclear Energy, recommending that Japan should proceed with the development of more advanced new technologies for the future, parallel to the existing nuclear systems. It also emphasizes that the HTGR is one of the most promising reactors with high efficiency and inherent safety, therefore it should be explored for the broader use of nuclear energy, not only for power production. Then the early construction of a High-Temperature engineering Test Reactor (HTTR) by JAERI was proposed. Based on this program, JAERI has changed the ''VHTR program'' for ''HTTR program'' to establish the HTGR technology basis and upgrade them. The permission of the HTTR construction was made by the Science and Technology Agency (STA) in February 1989. 3 figs, 2 tabs

  14. Toward the responsible innovation with nanotechnology in Japan: our scope

    Energy Technology Data Exchange (ETDEWEB)

    Ishizu, Saori, E-mail: ishizu-saori@aist.go.jp; Sekiya, Mizuki [National Institute of Advanced Industrial Science and Technology (AIST), Technology Information Department (Japan); Ishibashi, Ken-ichi [Sony Corporation (Japan); Negami, Yumi [Trade and Industry (METI), Ministry of Economy (Japan); Ata, Masafumi [National Institute of Advanced Industrial Science and Technology (AIST), Technology Information Department (Japan)

    2008-02-15

    The societal impacts of nanotechnology have attracted growing attention in the United States and Europe in recent years. In Japan, the National Institute of Advanced Industrial Science and Technology (Technology Information Department) has played a central role in promoting discussions on this topic by collecting information from Japan and overseas, creating a network of the interested parties, and providing a forum for discussion. This paper presents a summary of recent activities in Japan relating to the societal impacts of nanotechnology, fro the launch of the 'Nanotechnology and Society' open forum (August 2004) until the 'Nanotechnology Debate' discussion forum (February 2007), and outlines the policy recommendations that came out of a project entitled 'Research on Facilitation of Public Acceptance of Nanotechnology' (March 2006)

  15. Toward the responsible innovation with nanotechnology in Japan: our scope

    International Nuclear Information System (INIS)

    Ishizu, Saori; Sekiya, Mizuki; Ishibashi, Ken-ichi; Negami, Yumi; Ata, Masafumi

    2008-01-01

    The societal impacts of nanotechnology have attracted growing attention in the United States and Europe in recent years. In Japan, the National Institute of Advanced Industrial Science and Technology (Technology Information Department) has played a central role in promoting discussions on this topic by collecting information from Japan and overseas, creating a network of the interested parties, and providing a forum for discussion. This paper presents a summary of recent activities in Japan relating to the societal impacts of nanotechnology, fro the launch of the 'Nanotechnology and Society' open forum (August 2004) until the 'Nanotechnology Debate' discussion forum (February 2007), and outlines the policy recommendations that came out of a project entitled 'Research on Facilitation of Public Acceptance of Nanotechnology' (March 2006)

  16. Nuclear Energy Literature Review

    International Nuclear Information System (INIS)

    Simic, Z.; Wastin, F.

    2016-01-01

    are the most frequent for Chernobyl literature. For Fukushima 'energy' subject is the most frequent with 'engineering' as a close second. Total volume of publishing continuously rose till 1985, then decreased till 1999 recovering in 2003, rising significantly afterwards till 2012 with steady high level till today. English is used in 86 percent of all publications with more than 90 percent for recent 5 years and all accidents related publications except for Chernobyl (77 percent). All other languages have small share (2 percent or less) except for Russian (14 percent for Chernobyl), Japanese (5 percent for Fukushima) and Chinese (6 percent for all NE related in recent 5 years). Overall, 25 percent of publishing is coming from the USA second with only few countries (Japan, Germany, China, France, Russia and UK) around 5 percent. Countries top share is much different depending on accident. USA has 32 percent for TMI with only Japan as second with 6 percent. For Chernobyl USA is at the top with Russia but with only 11 percent share, UK and Ukraine as second (7 percent), France and Germany at a distinct third place (5 percent). Only for the Fukushima related publishing US is second (16 percent) where Japan share is 41 percent with 3 countries (France, Germany and China) around 5 percent. Presented statistics illustrate the potential for different insights from such literature review. For making more specific conclusions further assessment is necessary which should include other databases with further improved selection process and careful keywords share consideration. (author).

  17. Moral Education in Japan

    DEFF Research Database (Denmark)

    Roesgaard, Marie Højlund

    ‘religion’ is not a subject in schools. So, how do the Japanese go about the business of teaching values and morality? Using the Japanese example, this volume looks at moral education from the basic point of view of universal and common human values, with due attention given to culture-specific traits...... in the legal frame work (the Fundamental Law on Education was revised in 2006) and the ministerial guidelines and policies (new curriculum guidelines have been issued after the law change, and new proposals for strengthening the position of moral education come on a regular basis) have reflected the increased......What is a ‘good’ person and how do we educate ‘good’ persons? This question of morality is central to any society and its government and educational system including the Japanese. In many societies it has been customary to teach about morality from a religious standpoint, but not so in Japan, where...

  18. Will Japan Rearm.

    Science.gov (United States)

    1977-06-10

    Faculty Accepte d th is _________ day of~~~U)~4 l977~c~y.11 -~~~~~~~~~~~~D i rector , Master of Militar y Art Science . The opinions and...j~ s’ri : ‘~~~~ ~ IC . _ __~~~~~~ i 1~~~~~n Unhi ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 150 _ _ _ _ _ _ _ _ _ _ L~ MASTER OF MILITARY ART ... SCIENCE THESIS APPROVAL PAGE Name of Candidate Joseph Bertrand Berger, Jr. Major, Air Defense Artillery T it le of Thes i s W i l l Japan Rearm

  19. Typhoon Chataan off Japan

    Science.gov (United States)

    2002-01-01

    Slowly winding its way down, Typhoon Chataan had dropped to tropical storm status by Thursday, July 11, 2002, when this image from the Moderate Resolution Imaging Spectroradiometer (MODIS) was captured. In the image, the storm is located off the east coast of central Japan in the Pacific Ocean. The storm is much less organized than it was in the previous day's image. Through a gap in the clouds to the southwest of the storm's eye, Tokyo can be seen as a grayish cluster of pixels surrounding a small bay or inlet that protrudes into the island of Honshu. Credit: Image courtesy Jesse Allen, NASA Earth Observatory; data provided by the MODIS Land Rapid Response Team

  20. Dosimetry studies in Japan

    International Nuclear Information System (INIS)

    Maruyama, T.; Kumamoto, Y.; Hashizume, T.

    1982-01-01

    In 1967 the National Institute of Radiological Sciences in Chiba estimated the radiation doses in air from the atomic bombing of Hiroshima and Nagasaki by using some building materials exposed to the nuclear explosions in both cities. These estimated doses were in good agreement with the doses estimated on the basis of the Ichiban project by the research group at Oak Ridge National Laboratory which were the basis for the Atomic Bomb Casualty Commission's tentative 1965 radiation dose (T65D). Recently the radiation doses in Hiroshima and Nagasaki have been reevaluated by Lawrence Livermore National Laboratory and Oak Ridge National Laboratory. In Japan a new research group was started last August, with the intention of making new estimates of doses from the atomic bombs in cooperation with US research groups